From b8603f59e72534ec6342d3a4819bb53619a5e8a4 Mon Sep 17 00:00:00 2001 From: "F. Ramu" Date: Thu, 15 Feb 2024 15:45:26 +0100 Subject: [PATCH 1/5] stm32cube: add the stm32H7RS serie Introduce the Cube version for STM32H7RSxx series version 1.0.0RC3 Signed-off-by: F. Ramu --- stm32cube/CMakeLists.txt | 1 + stm32cube/stm32h7rsxx/CMakeLists.txt | 126 + stm32cube/stm32h7rsxx/LICENSE.md | 27 + stm32cube/stm32h7rsxx/README | 46 + stm32cube/stm32h7rsxx/Release_Notes.html | 1423 + .../drivers/include/Legacy/stm32_hal_legacy.h | 4340 +++ .../drivers/include/stm32_assert.h | 53 + .../drivers/include/stm32h7rsxx_hal.h | 767 + .../drivers/include/stm32h7rsxx_hal_adc.h | 2028 ++ .../drivers/include/stm32h7rsxx_hal_adc_ex.h | 1152 + .../drivers/include/stm32h7rsxx_hal_cec.h | 804 + .../drivers/include/stm32h7rsxx_hal_conf.h | 507 + .../drivers/include/stm32h7rsxx_hal_cordic.h | 609 + .../drivers/include/stm32h7rsxx_hal_cortex.h | 409 + .../drivers/include/stm32h7rsxx_hal_crc.h | 342 + .../drivers/include/stm32h7rsxx_hal_crc_ex.h | 150 + .../drivers/include/stm32h7rsxx_hal_cryp.h | 944 + .../drivers/include/stm32h7rsxx_hal_cryp_ex.h | 129 + .../drivers/include/stm32h7rsxx_hal_dcmipp.h | 948 + .../drivers/include/stm32h7rsxx_hal_def.h | 195 + .../drivers/include/stm32h7rsxx_hal_dma.h | 875 + .../drivers/include/stm32h7rsxx_hal_dma2d.h | 715 + .../drivers/include/stm32h7rsxx_hal_dma_ex.h | 719 + .../drivers/include/stm32h7rsxx_hal_dts.h | 546 + .../drivers/include/stm32h7rsxx_hal_eth.h | 1823 ++ .../drivers/include/stm32h7rsxx_hal_eth_ex.h | 366 + .../drivers/include/stm32h7rsxx_hal_exti.h | 347 + .../drivers/include/stm32h7rsxx_hal_fdcan.h | 1442 + .../drivers/include/stm32h7rsxx_hal_flash.h | 831 + .../include/stm32h7rsxx_hal_flash_ex.h | 262 + .../drivers/include/stm32h7rsxx_hal_gfxmmu.h | 370 + .../drivers/include/stm32h7rsxx_hal_gfxtim.h | 929 + .../drivers/include/stm32h7rsxx_hal_gpio.h | 326 + .../drivers/include/stm32h7rsxx_hal_gpio_ex.h | 266 + .../drivers/include/stm32h7rsxx_hal_gpu2d.h | 321 + .../drivers/include/stm32h7rsxx_hal_hash.h | 579 + .../drivers/include/stm32h7rsxx_hal_hcd.h | 327 + .../drivers/include/stm32h7rsxx_hal_i2c.h | 842 + .../drivers/include/stm32h7rsxx_hal_i2c_ex.h | 156 + .../drivers/include/stm32h7rsxx_hal_i2s.h | 663 + .../drivers/include/stm32h7rsxx_hal_i2s_ex.h | 26 + .../drivers/include/stm32h7rsxx_hal_i3c.h | 1371 + .../drivers/include/stm32h7rsxx_hal_icache.h | 216 + .../drivers/include/stm32h7rsxx_hal_irda.h | 900 + .../drivers/include/stm32h7rsxx_hal_irda_ex.h | 216 + .../drivers/include/stm32h7rsxx_hal_iwdg.h | 302 + .../drivers/include/stm32h7rsxx_hal_jpeg.h | 654 + .../drivers/include/stm32h7rsxx_hal_lptim.h | 1259 + .../drivers/include/stm32h7rsxx_hal_ltdc.h | 720 + .../drivers/include/stm32h7rsxx_hal_ltdc_ex.h | 83 + .../drivers/include/stm32h7rsxx_hal_mce.h | 479 + .../drivers/include/stm32h7rsxx_hal_mdf.h | 781 + .../drivers/include/stm32h7rsxx_hal_mdios.h | 576 + .../drivers/include/stm32h7rsxx_hal_mmc.h | 873 + .../drivers/include/stm32h7rsxx_hal_mmc_ex.h | 122 + .../drivers/include/stm32h7rsxx_hal_nand.h | 376 + .../drivers/include/stm32h7rsxx_hal_nor.h | 324 + .../drivers/include/stm32h7rsxx_hal_pcd.h | 427 + .../drivers/include/stm32h7rsxx_hal_pcd_ex.h | 88 + .../drivers/include/stm32h7rsxx_hal_pka.h | 670 + .../drivers/include/stm32h7rsxx_hal_pssi.h | 568 + .../drivers/include/stm32h7rsxx_hal_pwr.h | 589 + .../drivers/include/stm32h7rsxx_hal_pwr_ex.h | 610 + .../drivers/include/stm32h7rsxx_hal_ramecc.h | 394 + .../drivers/include/stm32h7rsxx_hal_rcc.h | 4818 +++ .../drivers/include/stm32h7rsxx_hal_rcc_ex.h | 1996 ++ .../drivers/include/stm32h7rsxx_hal_rng.h | 389 + .../drivers/include/stm32h7rsxx_hal_rng_ex.h | 263 + .../drivers/include/stm32h7rsxx_hal_rtc.h | 977 + .../drivers/include/stm32h7rsxx_hal_rtc_ex.h | 1783 ++ .../drivers/include/stm32h7rsxx_hal_sai.h | 968 + .../drivers/include/stm32h7rsxx_hal_sai_ex.h | 103 + .../drivers/include/stm32h7rsxx_hal_sd.h | 798 + .../drivers/include/stm32h7rsxx_hal_sd_ex.h | 119 + .../drivers/include/stm32h7rsxx_hal_sdram.h | 236 + .../include/stm32h7rsxx_hal_smartcard.h | 1213 + .../include/stm32h7rsxx_hal_smartcard_ex.h | 336 + .../drivers/include/stm32h7rsxx_hal_smbus.h | 787 + .../include/stm32h7rsxx_hal_smbus_ex.h | 133 + .../drivers/include/stm32h7rsxx_hal_spdifrx.h | 622 + .../drivers/include/stm32h7rsxx_hal_spi.h | 1128 + .../drivers/include/stm32h7rsxx_hal_spi_ex.h | 99 + .../drivers/include/stm32h7rsxx_hal_sram.h | 230 + .../drivers/include/stm32h7rsxx_hal_tim.h | 2552 ++ .../drivers/include/stm32h7rsxx_hal_tim_ex.h | 1124 + .../drivers/include/stm32h7rsxx_hal_uart.h | 1780 ++ .../drivers/include/stm32h7rsxx_hal_uart_ex.h | 409 + .../drivers/include/stm32h7rsxx_hal_usart.h | 986 + .../include/stm32h7rsxx_hal_usart_ex.h | 282 + .../drivers/include/stm32h7rsxx_hal_wwdg.h | 307 + .../drivers/include/stm32h7rsxx_hal_xspi.h | 1269 + .../drivers/include/stm32h7rsxx_ll_adc.h | 8263 ++++++ .../drivers/include/stm32h7rsxx_ll_bus.h | 2734 ++ .../drivers/include/stm32h7rsxx_ll_cordic.h | 783 + .../drivers/include/stm32h7rsxx_ll_cortex.h | 715 + .../drivers/include/stm32h7rsxx_ll_crc.h | 461 + .../drivers/include/stm32h7rsxx_ll_crs.h | 786 + .../drivers/include/stm32h7rsxx_ll_dlyb.h | 143 + .../drivers/include/stm32h7rsxx_ll_dma.h | 6677 +++++ .../drivers/include/stm32h7rsxx_ll_dma2d.h | 2231 ++ .../drivers/include/stm32h7rsxx_ll_exti.h | 1505 + .../drivers/include/stm32h7rsxx_ll_fmc.h | 1162 + .../drivers/include/stm32h7rsxx_ll_gpio.h | 994 + .../drivers/include/stm32h7rsxx_ll_i2c.h | 2372 ++ .../drivers/include/stm32h7rsxx_ll_i3c.h | 4407 +++ .../drivers/include/stm32h7rsxx_ll_icache.h | 453 + .../drivers/include/stm32h7rsxx_ll_iwdg.h | 453 + .../drivers/include/stm32h7rsxx_ll_lptim.h | 2458 ++ .../drivers/include/stm32h7rsxx_ll_lpuart.h | 2658 ++ .../drivers/include/stm32h7rsxx_ll_pka.h | 601 + .../drivers/include/stm32h7rsxx_ll_pwr.h | 1887 ++ .../drivers/include/stm32h7rsxx_ll_rcc.h | 5931 ++++ .../drivers/include/stm32h7rsxx_ll_rng.h | 724 + .../drivers/include/stm32h7rsxx_ll_rtc.h | 6176 ++++ .../drivers/include/stm32h7rsxx_ll_sdmmc.h | 1164 + .../drivers/include/stm32h7rsxx_ll_spi.h | 3662 +++ .../drivers/include/stm32h7rsxx_ll_system.h | 2243 ++ .../drivers/include/stm32h7rsxx_ll_tim.h | 6101 ++++ .../drivers/include/stm32h7rsxx_ll_ucpd.h | 1885 ++ .../drivers/include/stm32h7rsxx_ll_usart.h | 4400 +++ .../drivers/include/stm32h7rsxx_ll_usb.h | 578 + .../drivers/include/stm32h7rsxx_ll_utils.h | 388 + .../drivers/include/stm32h7rsxx_ll_wwdg.h | 328 + .../drivers/include/stm32h7rsxx_util_i3c.h | 135 + .../stm32h7rsxx/drivers/src/stm32h7rsxx_hal.c | 1497 + .../drivers/src/stm32h7rsxx_hal_adc.c | 3768 +++ .../drivers/src/stm32h7rsxx_hal_adc_ex.c | 2447 ++ .../drivers/src/stm32h7rsxx_hal_cec.c | 997 + .../drivers/src/stm32h7rsxx_hal_cordic.c | 1357 + .../drivers/src/stm32h7rsxx_hal_cortex.c | 569 + .../drivers/src/stm32h7rsxx_hal_crc.c | 516 + .../drivers/src/stm32h7rsxx_hal_crc_ex.c | 232 + .../drivers/src/stm32h7rsxx_hal_cryp.c | 8100 +++++ .../drivers/src/stm32h7rsxx_hal_cryp_ex.c | 1016 + .../drivers/src/stm32h7rsxx_hal_dcmipp.c | 2276 ++ .../drivers/src/stm32h7rsxx_hal_dma.c | 1745 ++ .../drivers/src/stm32h7rsxx_hal_dma2d.c | 2186 ++ .../drivers/src/stm32h7rsxx_hal_dma_ex.c | 4661 +++ .../drivers/src/stm32h7rsxx_hal_dts.c | 1087 + .../drivers/src/stm32h7rsxx_hal_eth.c | 3341 +++ .../drivers/src/stm32h7rsxx_hal_eth_ex.c | 660 + .../drivers/src/stm32h7rsxx_hal_exti.c | 639 + .../drivers/src/stm32h7rsxx_hal_fdcan.c | 3538 +++ .../drivers/src/stm32h7rsxx_hal_flash.c | 969 + .../drivers/src/stm32h7rsxx_hal_flash_ex.c | 1306 + .../drivers/src/stm32h7rsxx_hal_gfxmmu.c | 872 + .../drivers/src/stm32h7rsxx_hal_gfxtim.c | 2032 ++ .../drivers/src/stm32h7rsxx_hal_gpio.c | 555 + .../drivers/src/stm32h7rsxx_hal_gpu2d.c | 750 + .../drivers/src/stm32h7rsxx_hal_hash.c | 3170 ++ .../drivers/src/stm32h7rsxx_hal_hcd.c | 1985 ++ .../drivers/src/stm32h7rsxx_hal_i2c.c | 7809 +++++ .../drivers/src/stm32h7rsxx_hal_i2c_ex.c | 359 + .../drivers/src/stm32h7rsxx_hal_i2s.c | 2710 ++ .../drivers/src/stm32h7rsxx_hal_i2s_ex.c | 31 + .../drivers/src/stm32h7rsxx_hal_i3c.c | 9623 ++++++ .../drivers/src/stm32h7rsxx_hal_icache.c | 512 + .../drivers/src/stm32h7rsxx_hal_irda.c | 3015 ++ .../drivers/src/stm32h7rsxx_hal_iwdg.c | 510 + .../drivers/src/stm32h7rsxx_hal_jpeg.c | 4280 +++ .../drivers/src/stm32h7rsxx_hal_lptim.c | 3777 +++ .../drivers/src/stm32h7rsxx_hal_ltdc.c | 2219 ++ .../drivers/src/stm32h7rsxx_hal_ltdc_ex.c | 154 + .../drivers/src/stm32h7rsxx_hal_mce.c | 1063 + .../drivers/src/stm32h7rsxx_hal_mdf.c | 2236 ++ .../drivers/src/stm32h7rsxx_hal_mdios.c | 921 + .../drivers/src/stm32h7rsxx_hal_mmc.c | 5890 ++++ .../drivers/src/stm32h7rsxx_hal_mmc_ex.c | 448 + .../src/stm32h7rsxx_hal_msp_template.c | 97 + .../drivers/src/stm32h7rsxx_hal_nand.c | 2231 ++ .../drivers/src/stm32h7rsxx_hal_nor.c | 1642 + .../drivers/src/stm32h7rsxx_hal_pcd.c | 2362 ++ .../drivers/src/stm32h7rsxx_hal_pcd_ex.c | 400 + .../drivers/src/stm32h7rsxx_hal_pka.c | 3042 ++ .../drivers/src/stm32h7rsxx_hal_pssi.c | 1929 ++ .../drivers/src/stm32h7rsxx_hal_pwr.c | 692 + .../drivers/src/stm32h7rsxx_hal_pwr_ex.c | 1601 + .../drivers/src/stm32h7rsxx_hal_ramecc.c | 966 + .../drivers/src/stm32h7rsxx_hal_rcc.c | 2320 ++ .../drivers/src/stm32h7rsxx_hal_rcc_ex.c | 3242 ++ .../drivers/src/stm32h7rsxx_hal_rng.c | 1027 + .../drivers/src/stm32h7rsxx_hal_rng_ex.c | 339 + .../drivers/src/stm32h7rsxx_hal_rtc.c | 2270 ++ .../drivers/src/stm32h7rsxx_hal_rtc_ex.c | 2934 ++ .../drivers/src/stm32h7rsxx_hal_sai.c | 2898 ++ .../drivers/src/stm32h7rsxx_hal_sai_ex.c | 129 + .../drivers/src/stm32h7rsxx_hal_sd.c | 4070 +++ .../drivers/src/stm32h7rsxx_hal_sd_ex.c | 393 + .../drivers/src/stm32h7rsxx_hal_sdram.c | 1429 + .../drivers/src/stm32h7rsxx_hal_smartcard.c | 3286 ++ .../src/stm32h7rsxx_hal_smartcard_ex.c | 495 + .../drivers/src/stm32h7rsxx_hal_smbus.c | 2776 ++ .../drivers/src/stm32h7rsxx_hal_smbus_ex.c | 245 + .../drivers/src/stm32h7rsxx_hal_spdifrx.c | 1741 ++ .../drivers/src/stm32h7rsxx_hal_spi.c | 3796 +++ .../drivers/src/stm32h7rsxx_hal_spi_ex.c | 228 + .../drivers/src/stm32h7rsxx_hal_sram.c | 1236 + .../drivers/src/stm32h7rsxx_hal_tim.c | 8242 ++++++ .../drivers/src/stm32h7rsxx_hal_tim_ex.c | 3351 +++ ...2h7rsxx_hal_timebase_rtc_wakeup_template.c | 275 + .../stm32h7rsxx_hal_timebase_tim_template.c | 220 + .../drivers/src/stm32h7rsxx_hal_uart.c | 4867 +++ .../drivers/src/stm32h7rsxx_hal_uart_ex.c | 1044 + .../drivers/src/stm32h7rsxx_hal_usart.c | 3959 +++ .../drivers/src/stm32h7rsxx_hal_usart_ex.c | 541 + .../drivers/src/stm32h7rsxx_hal_wwdg.c | 420 + .../drivers/src/stm32h7rsxx_hal_xspi.c | 3424 +++ .../drivers/src/stm32h7rsxx_ll_adc.c | 1067 + .../drivers/src/stm32h7rsxx_ll_cordic.c | 102 + .../drivers/src/stm32h7rsxx_ll_crc.c | 103 + .../drivers/src/stm32h7rsxx_ll_crs.c | 83 + .../drivers/src/stm32h7rsxx_ll_dlyb.c | 243 + .../drivers/src/stm32h7rsxx_ll_dma.c | 1195 + .../drivers/src/stm32h7rsxx_ll_dma2d.c | 633 + .../drivers/src/stm32h7rsxx_ll_exti.c | 321 + .../drivers/src/stm32h7rsxx_ll_fmc.c | 1107 + .../drivers/src/stm32h7rsxx_ll_gpio.c | 299 + .../drivers/src/stm32h7rsxx_ll_i2c.c | 232 + .../drivers/src/stm32h7rsxx_ll_i3c.c | 197 + .../drivers/src/stm32h7rsxx_ll_lptim.c | 206 + .../drivers/src/stm32h7rsxx_ll_lpuart.c | 285 + .../drivers/src/stm32h7rsxx_ll_pka.c | 163 + .../drivers/src/stm32h7rsxx_ll_pwr.c | 83 + .../drivers/src/stm32h7rsxx_ll_rcc.c | 1963 ++ .../drivers/src/stm32h7rsxx_ll_rng.c | 158 + .../drivers/src/stm32h7rsxx_ll_rtc.c | 850 + .../drivers/src/stm32h7rsxx_ll_sdmmc.c | 1907 ++ .../drivers/src/stm32h7rsxx_ll_spi.c | 751 + .../drivers/src/stm32h7rsxx_ll_tim.c | 1388 + .../drivers/src/stm32h7rsxx_ll_ucpd.c | 169 + .../drivers/src/stm32h7rsxx_ll_usart.c | 451 + .../drivers/src/stm32h7rsxx_ll_usb.c | 2316 ++ .../drivers/src/stm32h7rsxx_ll_utils.c | 866 + .../drivers/src/stm32h7rsxx_util_i3c.c | 409 + stm32cube/stm32h7rsxx/soc/stm32h7r3xx.h | 23362 +++++++++++++++ stm32cube/stm32h7rsxx/soc/stm32h7r7xx.h | 23798 +++++++++++++++ stm32cube/stm32h7rsxx/soc/stm32h7rsxx.h | 234 + stm32cube/stm32h7rsxx/soc/stm32h7s3xx.h | 24250 +++++++++++++++ stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h | 24686 ++++++++++++++++ .../stm32h7rsxx/soc/system_stm32h7rsxx.c | 285 + .../stm32h7rsxx/soc/system_stm32h7rsxx.h | 95 + stm32cube/stm32h7rsxx/soc/system_stm32h7xx.c | 450 + stm32cube/stm32h7rsxx/soc/system_stm32h7xx.h | 103 + 243 files changed, 430291 insertions(+) create mode 100644 stm32cube/stm32h7rsxx/CMakeLists.txt create mode 100644 stm32cube/stm32h7rsxx/LICENSE.md create mode 100644 stm32cube/stm32h7rsxx/README create mode 100644 stm32cube/stm32h7rsxx/Release_Notes.html create mode 100644 stm32cube/stm32h7rsxx/drivers/include/Legacy/stm32_hal_legacy.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cec.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_conf.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cordic.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cortex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dcmipp.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_def.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma2d.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dts.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_exti.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_fdcan.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxmmu.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxtim.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpu2d.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hash.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hcd.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i3c.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_icache.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_iwdg.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_jpeg.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_lptim.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mce.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdf.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdios.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nand.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nor.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pka.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pssi.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ramecc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sdram.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spdifrx.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sram.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart_ex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_wwdg.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_xspi.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_adc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_bus.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cordic.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cortex.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crs.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dlyb.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma2d.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_exti.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_fmc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_gpio.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i2c.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i3c.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_icache.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_iwdg.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lptim.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lpuart.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pka.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pwr.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rcc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rng.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rtc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_sdmmc.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_spi.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_system.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_tim.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_ucpd.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usart.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usb.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_utils.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_wwdg.h create mode 100644 stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_util_i3c.h create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cec.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cordic.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cortex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dcmipp.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma2d.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dts.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_exti.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_fdcan.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxmmu.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxtim.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpio.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpu2d.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hash.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hcd.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i3c.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_icache.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_irda.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_iwdg.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_jpeg.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_lptim.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mce.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdf.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdios.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_msp_template.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nand.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nor.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pka.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pssi.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ramecc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sdram.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spdifrx.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sram.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_rtc_wakeup_template.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_tim_template.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart_ex.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_wwdg.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_xspi.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_adc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_cordic.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crs.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dlyb.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma2d.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_exti.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_fmc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_gpio.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i2c.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i3c.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lptim.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lpuart.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pka.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pwr.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rcc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rng.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rtc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_sdmmc.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_spi.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_tim.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_ucpd.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usart.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usb.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_utils.c create mode 100644 stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_util_i3c.c create mode 100644 stm32cube/stm32h7rsxx/soc/stm32h7r3xx.h create mode 100644 stm32cube/stm32h7rsxx/soc/stm32h7r7xx.h create mode 100644 stm32cube/stm32h7rsxx/soc/stm32h7rsxx.h create mode 100644 stm32cube/stm32h7rsxx/soc/stm32h7s3xx.h create mode 100644 stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h create mode 100644 stm32cube/stm32h7rsxx/soc/system_stm32h7rsxx.c create mode 100644 stm32cube/stm32h7rsxx/soc/system_stm32h7rsxx.h create mode 100644 stm32cube/stm32h7rsxx/soc/system_stm32h7xx.c create mode 100644 stm32cube/stm32h7rsxx/soc/system_stm32h7xx.h diff --git a/stm32cube/CMakeLists.txt b/stm32cube/CMakeLists.txt index bdbaa9590..03d290b86 100644 --- a/stm32cube/CMakeLists.txt +++ b/stm32cube/CMakeLists.txt @@ -33,6 +33,7 @@ set(stm_socs stm32g4x stm32h5x stm32h7x + stm32h7rsx stm32l0x stm32l1x stm32l4x diff --git a/stm32cube/stm32h7rsxx/CMakeLists.txt b/stm32cube/stm32h7rsxx/CMakeLists.txt new file mode 100644 index 000000000..d19c749a5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/CMakeLists.txt @@ -0,0 +1,126 @@ +# Copyright (c) 2019 Linaro Limited +# Copyright (c) 2020 STMicroelectronics +# Copyright (c) 2024 STMicroelectronics +# +# SPDX-License-Identifier: Apache-2.0 + +zephyr_library_sources(soc/system_stm32h7rsxx.c) +zephyr_library_sources(drivers/src/stm32h7rsxx_hal.c) +zephyr_library_sources(drivers/src/stm32h7rsxx_hal_rcc.c) +zephyr_library_sources(drivers/src/stm32h7rsxx_hal_rcc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_ADC drivers/src/stm32h7rsxx_hal_adc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_ADC_EX drivers/src/stm32h7rsxx_hal_adc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CEC drivers/src/stm32h7rsxx_hal_cec.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_COMP drivers/src/stm32h7rsxx_hal_comp.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CORDIC drivers/src/stm32h7rsxx_hal_cordic.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CORTEX drivers/src/stm32h7rsxx_hal_cortex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CRC drivers/src/stm32h7rsxx_hal_crc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CRC_EX drivers/src/stm32h7rsxx_hal_crc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CRYP drivers/src/stm32h7rsxx_hal_cryp.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_CRYP_EX drivers/src/stm32h7rsxx_hal_cryp_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DAC drivers/src/stm32h7rsxx_hal_dac.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DAC_EX drivers/src/stm32h7rsxx_hal_dac_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DCMI drivers/src/stm32h7rsxx_hal_dcmi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DFSDM drivers/src/stm32h7rsxx_hal_dfsdm.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DFSDM_EX drivers/src/stm32h7rsxx_hal_dfsdm_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DMA drivers/src/stm32h7rsxx_hal_dma.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DMA2D drivers/src/stm32h7rsxx_hal_dma2d.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DMA_EX drivers/src/stm32h7rsxx_hal_dma_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DSI drivers/src/stm32h7rsxx_hal_dsi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_DTS drivers/src/stm32h7rsxx_hal_dts.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_ETH drivers/src/stm32h7rsxx_hal_eth.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_ETH_EX drivers/src/stm32h7rsxx_hal_eth_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_EXTI drivers/src/stm32h7rsxx_hal_exti.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_FDCAN drivers/src/stm32h7rsxx_hal_fdcan.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_FLASH drivers/src/stm32h7rsxx_hal_flash.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_FLASH_EX drivers/src/stm32h7rsxx_hal_flash_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_FMAC drivers/src/stm32h7rsxx_hal_fmac.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_GFXMMU drivers/src/stm32h7rsxx_hal_gfxmmu.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_GPIO drivers/src/stm32h7rsxx_hal_gpio.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_HASH drivers/src/stm32h7rsxx_hal_hash.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_HASH_EX drivers/src/stm32h7rsxx_hal_hash_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_HCD drivers/src/stm32h7rsxx_hal_hcd.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_I2C drivers/src/stm32h7rsxx_hal_i2c.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_I3C drivers/src/stm32h7rsxx_hal_i3c.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_I2C_EX drivers/src/stm32h7rsxx_hal_i2c_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_I2S drivers/src/stm32h7rsxx_hal_i2s.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_I2S_EX drivers/src/stm32h7rsxx_hal_i2s_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_IRDA drivers/src/stm32h7rsxx_hal_irda.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_IWDG drivers/src/stm32h7rsxx_hal_iwdg.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_JPEG drivers/src/stm32h7rsxx_hal_jpeg.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_LPTIM drivers/src/stm32h7rsxx_hal_lptim.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_LTDC drivers/src/stm32h7rsxx_hal_ltdc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_LTDC_EX drivers/src/stm32h7rsxx_hal_ltdc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_MDIOS drivers/src/stm32h7rsxx_hal_mdios.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_MDMA drivers/src/stm32h7rsxx_hal_mdma.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_MMC drivers/src/stm32h7rsxx_hal_mmc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_MMC_EX drivers/src/stm32h7rsxx_hal_mmc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_NAND drivers/src/stm32h7rsxx_hal_nand.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_NOR drivers/src/stm32h7rsxx_hal_nor.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OPAMP drivers/src/stm32h7rsxx_hal_opamp.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OPAMP_EX drivers/src/stm32h7rsxx_hal_opamp_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OSPI drivers/src/stm32h7rsxx_hal_ospi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OTFDEC drivers/src/stm32h7rsxx_hal_otfdec.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PCD drivers/src/stm32h7rsxx_hal_pcd.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PCD_EX drivers/src/stm32h7rsxx_hal_pcd_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PSSI drivers/src/stm32h7rsxx_hal_pssi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PWR drivers/src/stm32h7rsxx_hal_pwr.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PWR_EX drivers/src/stm32h7rsxx_hal_pwr_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_QSPI drivers/src/stm32h7rsxx_hal_qspi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_RAMECC drivers/src/stm32h7rsxx_hal_ramecc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_RNG drivers/src/stm32h7rsxx_hal_rng.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_RNG_EX drivers/src/stm32h7rsxx_hal_rng_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_RTC drivers/src/stm32h7rsxx_hal_rtc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_RTC_EX drivers/src/stm32h7rsxx_hal_rtc_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SAI drivers/src/stm32h7rsxx_hal_sai.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SAI_EX drivers/src/stm32h7rsxx_hal_sai_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SD drivers/src/stm32h7rsxx_hal_sd.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SD_EX drivers/src/stm32h7rsxx_hal_sd_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SDRAM drivers/src/stm32h7rsxx_hal_sdram.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SMARTCARD drivers/src/stm32h7rsxx_hal_smartcard.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SMARTCARD_EX drivers/src/stm32h7rsxx_hal_smartcard_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SMBUS drivers/src/stm32h7rsxx_hal_smbus.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SMBUS_EX drivers/src/stm32h7rsxx_hal_smbus_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SPDIFRX drivers/src/stm32h7rsxx_hal_spdifrx.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SPI drivers/src/stm32h7rsxx_hal_spi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SPI_EX drivers/src/stm32h7rsxx_hal_spi_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SRAM drivers/src/stm32h7rsxx_hal_sram.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_SWPMI drivers/src/stm32h7rsxx_hal_swpmi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_TIM drivers/src/stm32h7rsxx_hal_tim.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_TIM_EX drivers/src/stm32h7rsxx_hal_tim_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_UART drivers/src/stm32h7rsxx_hal_uart.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_UART_EX drivers/src/stm32h7rsxx_hal_uart_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_USART drivers/src/stm32h7rsxx_hal_usart.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_USART_EX drivers/src/stm32h7rsxx_hal_usart_ex.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_WWDG drivers/src/stm32h7rsxx_hal_wwdg.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_ADC drivers/src/stm32h7rsxx_ll_adc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_BDMA drivers/src/stm32h7rsxx_ll_bdma.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_COMP drivers/src/stm32h7rsxx_ll_comp.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CORDIC drivers/src/stm32h7rsxx_ll_cordic.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CRC drivers/src/stm32h7rsxx_ll_crc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CRS drivers/src/stm32h7rsxx_ll_crs.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DAC drivers/src/stm32h7rsxx_ll_dac.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DELAYBLOCK drivers/src/stm32h7rsxx_ll_delayblock.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DMA drivers/src/stm32h7rsxx_ll_dma.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DMA2D drivers/src/stm32h7rsxx_ll_dma2d.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_EXTI drivers/src/stm32h7rsxx_ll_exti.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_FMAC drivers/src/stm32h7rsxx_ll_fmac.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_FMC drivers/src/stm32h7rsxx_ll_fmc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_GPIO drivers/src/stm32h7rsxx_ll_gpio.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_HRTIM drivers/src/stm32h7rsxx_ll_hrtim.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_I2C drivers/src/stm32h7rsxx_ll_i2c.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_LPTIM drivers/src/stm32h7rsxx_ll_lptim.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_LPUART drivers/src/stm32h7rsxx_ll_lpuart.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_MDMA drivers/src/stm32h7rsxx_ll_mdma.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_OPAMP drivers/src/stm32h7rsxx_ll_opamp.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_PWR drivers/src/stm32h7rsxx_ll_pwr.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_RCC drivers/src/stm32h7rsxx_ll_rcc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_RNG drivers/src/stm32h7rsxx_ll_rng.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_RTC drivers/src/stm32h7rsxx_ll_rtc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_SDMMC drivers/src/stm32h7rsxx_ll_sdmmc.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_SPI drivers/src/stm32h7rsxx_ll_spi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_SWPMI drivers/src/stm32h7rsxx_ll_swpmi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_TIM drivers/src/stm32h7rsxx_ll_tim.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_USART drivers/src/stm32h7rsxx_ll_usart.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_USB drivers/src/stm32h7rsxx_ll_usb.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_UTILS drivers/src/stm32h7rsxx_ll_utils.c) diff --git a/stm32cube/stm32h7rsxx/LICENSE.md b/stm32cube/stm32h7rsxx/LICENSE.md new file mode 100644 index 000000000..9226612ae --- /dev/null +++ b/stm32cube/stm32h7rsxx/LICENSE.md @@ -0,0 +1,27 @@ +Copyright 2021 STMicroelectronics. +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/stm32cube/stm32h7rsxx/README b/stm32cube/stm32h7rsxx/README new file mode 100644 index 000000000..daa57e19c --- /dev/null +++ b/stm32cube/stm32h7rsxx/README @@ -0,0 +1,46 @@ +STM32CubeH7RS +############# + +Origin: + ST Microelectronics + http://www.st.com/en/embedded-software/stm32cubeh7rs.html + +Status: + version v1.0.0 + +Purpose: + ST Microelectronics official MCU package for STM32H7RS series. + +Description: + This package is an extract of official STM32CubeH7RS package written by ST Microelectronics. + It is composed of STM32Cube hardware abstraction layer (HAL) and low layer (LL) plus a set + of CMSIS headers files, one for each SoC in STM32H7RS series. + +Dependencies: + None. + +URL: + https://github.com/STMicroelectronics/STM32CubeH7RS + +Commit: + ed7d3d4a8e0961ad2bcb21ba7681d5443964253c + +Maintained-by: + External + +License: + BSD-3-Clause + +License Link: + https://opensource.org/licenses/BSD-3-Clause + +Patch List: + *Changes from official delivery: + -dos2unix applied + -trailing white spaces removed + + *Provision to enable hal & ll asserts added + -Added stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h + -Removed unused stm32cube/stm32h7rsxx/drivers/include/stm32_assert_template.h + + See release_note.html from STM32Cube diff --git a/stm32cube/stm32h7rsxx/Release_Notes.html b/stm32cube/stm32h7rsxx/Release_Notes.html new file mode 100644 index 000000000..7a9e9e833 --- /dev/null +++ b/stm32cube/stm32h7rsxx/Release_Notes.html @@ -0,0 +1,1423 @@ + + + + + + + Release Notes for STM32H7RSxx HAL Drivers Package + + + + + + +
+
+
+

Release Notes for

+

STM32H7RSxx HAL Drivers

+

Copyright © 2022 STMicroelectronics

+ +
+

Purpose

+

The STM32Cube HAL and LL, an STM32 abstraction layer embedded software, ensure maximized portability across STM32 portfolio.

+

The portable APIs layer provides a generic, multi instanced and simple set of APIs to interact with the upper layer (application, libraries and stacks). It is composed of native and extended APIs set. It is directly built around a generic architecture and allows the build-upon layers, like the middleware layer, to implement its functions without knowing in-depth the used STM32 device. This improves the library code reusability and guarantees an easy portability on other devices and STM32 families.

+

The Low Layer (LL) drivers are part of the STM32Cube firmware HAL that provides a basic set of optimized and one shot services. The Low layer drivers, contrary to the HAL ones are not fully portable across the STM32 families; the availability of some functions depends on the physical availability of the relative features on the product. The Low Layer (LL) drivers are designed to offer the following features:

+
    +
  • New set of inline functions for direct and atomic register access
    • +
  • One-shot operations that can be used by the HAL drivers or from application level
    • +
  • Full independence from HAL and standalone usage (without HAL drivers)
    • +
  • Full features coverage of all the supported peripherals
    • +
+
+
+

Update History

+
+ +
+

Main Changes

+

Release Candidate of STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices: +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DCMIPP, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GFXTIM, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features / API update

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[HAL CRS/RCC] Rename RCC_CRS_SYNC_SOURCE_PIN to RCC_CRS_SYNC_SOURCE_GPIO
[HAL DMA] GFXTIM trigger is 1 to 4 (instead of 0 to 3)
[HAL ETH] Rename ETH_TxPacketConfig_t to ETH_TxPacketConfigTypeDef
[HAL DEF] Add missing ALIGN_32BYTES macro
[HAL TIM Timebase] TIMPRE taken into account when hal_timebase_tim used
[HAL RCC] Add macro __HAL_RCC_GET_TIMCLKPRESCALER()
[HAL UART] Add LL LPUART API allowing TX FIFO flush request
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[HAL CORTEX][MPU] Configure MPU region without enabling it
[HAL CRYP] Correct warning due to “unused variable”
[HAL DCMIPP] Correct Misra-Rule12.1 and Coverity warnings
[HAL DCMIPP] Param check of DPREG END START
[HAL DCMIPP] Fix state check for HAL_DCMIPP_PIPE_Stop
[HAL DMA] Fix MISRA warnings
[HAL DMA2D] Fix MISRA & Codespell warnings
[HAL ETH][PTP] Add missing system time in different PTP APIs
[HAL ETH] Fix ETH_Start_IT sequence for all products
[HAL ETH] Bug and suggestions related to the PTP Implementation
[HAL ETH] ETH_TxPacketConfig should be renamed into ETH_TxPacketConfig_t
[HAL ETH] Proposal to use transmit timestamp status flag
[HAL ETH] ETH_RX_BUF_SIZE used instead of user supplied value
[HAL ETH] Use of ethernet framelength as buffer length instead of size of the latest buffer
[HAL ETH] Add/Delete emplty lines in hal_eth.c/hal_eth_ex.h
[HAL ETH] Remove multiple volatile reads or writes in interrupt handler
[HAL ETH] Unwanted interrupts not masked
[HAL ETH] Change the way to increment the descriptor index within HAL_ETH_ReleaseTxPacket()
[HAL ETH] Enabling unwanted global interrupts
[HAL ETH] Missing CSTF bit definition for ETH_MACCR register
[HAL ETH] ETH DMA peripheral reads incorrect Rx buffer address
[HAL ETH] Rework on MAC L4/L3 Set/Get Filter config functions
[HAL FLASH] Update double ECC detection management
[HAL FMC] Correct bitwise and with zero coverity errors
[HAL FMC] Fix parameter assert for TCLR and TAR
[HAL FMC] Correct MISRA warning MISRAC2012-Rule-8.13
[HAL] Add REV_ID_A for cut1.2
[HAL RTC Timebase] Timebase 100ms accuracy now operational when 16bits timer are used
[HAL Timebase] Correct hal_timebase_rtc_wakeup_template for all clock sources and Tickfreq
[HAL] Correct wrong description of HAL_GetTickFreq() API
[HAL GFXTIM] Add const-qualified type for hgfxtim handle in AbsoluteTimer_GetCounter and RelativeTimer_GetCounter APIS
[HAL I2C] TXDR is flushed when no error is occurred
[HAL I2C] HAL_I2C_Slave_Transmit returning HAL error when checking the NACK flag
[HAL I2C] Aborting an HAL_I2C_Mem_Read_IT or HAL_I2C_Mem_Write_IT
[HAL I2C] Fix issue with HAL_I2C_IsDeviceReady
[HAL I2C] Fordidden prescaler related to DT duration configuration is not well implementation on the different STM32 product
[HAL I2C] TX IRQ is not disabled after data transfer
[HAL I2C] Switch from 10bits to 7bits addressing failed
[util I3C] Move LL I3C inclusion through switch USE_FULL_LL_DRIVER
[HAL I3C] Add interface and macro to retrieve the different part of the ENTDAA payload
[LL I3C] Solve MISRA Rule 2.7 on LL I3C Deinit with only one instance supported on the product
[HAL I3C] Avoid lost of IBI or HJ or CR event notification
[HAL LTDC] Correct MISRA warning MISRAC2012-Rule-8.13 by adding const qualifier
[HAL LTDC] Fix incorrect pitch value for 64-bit bus width
[HAL MCE] Fix MISRA warning
[HAL MCE] Fix warning for ‘tickstart’ and rename pointer ‘ptr’ to ‘p_key’ (according to coding rules)
[HAL MCE] No limitation on the use of MCE1 and MCE2
[HAL MCE] Wrong check of fast key in HAL_MCE_ConfigNoekeon
[HAL MCE] Correct Dereference before null check
[HAL RCC] Solves MISRA errors in HAL_Ex and LL
[HAL RCC] HAL_RCCEx_GetPeriphCLKFreq() shall consider RCC_CKPROTR for FMC & XSPI1/XSPI2
[HAL RTC] Optimize access to SCR register
[HAL TIM] Fix typo in some HAL and LL macros (ASYMMETRIC instead of ASYMMETRIC)
[HAL USB] prevent auto start of periodic interrupt channel during NAK
[HAL USB] adding support of Tiger G7 platform
[HAL USB] adding support of V8 product
[HAL USB] fix Tiger compilation issue
[HAL USB] fix code coverage infinite loop issue
[HAL USB] Battery-charging detection not implemented properly
[HAL USB] fix Hub LS devices start transfer with USB DMA
[HAL USB] remove useless USB_OTG_FS define
[HAL USB] remove hard coded timeout value
[HAL USB] Improve USB_SetCurrentMode with more precise HAL_Delay implementation
[HAL USB] fix coverity comparison warning
[HAL USB] minor misraC and vbus sensing fixes
[LL USBPD] Solve MISRAC2012-Rule-8.13 warning on LL_UCPD_Init prototype
+

Supported Devices and boards

+
    +
  • STM32H7S7xx, STM32H7S3xx, STM32H7R7xx, STM32H7R3xx devices
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Release Candidate of STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices: +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DCMIPP, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GFXTIM, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features / API update

+ + + + + + + + + + + + + + + + + + + + + + + +
Headline
[DCMIPP] API renaming:
HAL_DCMIPP_SetParallelConfig() renamed to HAL_DCMIPP_PARALLEL_SetConfig()
HAL_DCMIPP_PIPE_Config() renamed to HAL_DCMIPP_PIPE_SetConfig()
HAL_DCMIPP_PIPE_SetInputPixelFormat() renamed to HAL_DCMIPP_PIPE_PARALLEL_SetInputPixelFormat()
HAL_DCMIPP_SetSyncUnmask() renamed to HAL_DCMIPP_PARALLEL_SetSyncUnmask()
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[DCMIPP] Correct wrong parameter for assert_param check in HAL_DCMIPP_PIPE_SetCropConfig
[FLASH] [Coverity]Correct Out-of-bounds access of HAL_FLASHEx_KeyConfig
[FMC LL] fix parameter assert for TCLR and TAR
[TIM HAL] Bidirectional break isn’t configured for lite timers (e.g. TIM15)
[TIM LL] Remove LL functions LL_TIM_ReArmBRK[2]
[TIM LL] Missing function LL_TIM_CC_IsEnabledPreload()
[TIM HAL] System break related interrupt flag (SBIF) isn’t cleared by HAL_TIM_IRQHandler
[TIM_HAL] Fix MCUAstyle warnings
[TIM LL] Minor typos in code and doxygen comments
[TIM HAL] Use TIM_CCER_CCxNE_MASK to check complementary channels status
[TIM HAL] in HAL_TIMEx_ConfigBreakDeadTime(), break input mode can be set unconditionally
[TIM LL] In LL_TIM_BDTR_Init, all calls to assert macros can be grouped
[TIM LL] assert checks on complementary channel configuration should depend on timer instance
[TIM HAL] Diversity on channel CH4N support isn’t correctly implemented
[I2C HAL] Error not well managed during HAL_I2C_Mem_Read polling process
[PSSI HAL] Correct issue in HAL_PSSI_Receive_DMA() with a test using a wrong field hdmatx instead of hdmarx
[HAL PSSI] Use MODIFY_REG in functions HAL_PSSI_Transmit and HAL_PSSI_Receive
+

Supported Devices and boards

+
    +
  • STM32H7S7xx, STM32H7S3xx, STM32H7R7xx, STM32H7R3xx devices
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Release Candidate of STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices: +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DCMIPP, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GFXTIM, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[CORTEX] add new API HAL_CORTEX_ClearEvent()
[DMA] Add peripheral flow control assert, request names updated
[DMA] Define request names need updates for HAL & LL for ADF1 UART4, UART5, UART7, LPTIM2
[FLASH] Add Flash APIs for ECC management
[I3C] Add Add HAL_I3C_Mem_Read/HAL_I3C_Mem_Write
[I3C] Add Interface to check the availability of I2C or I3C device in the Bus.
[PWR] API Update: Change return type from HAL_StatusTypeDef to void for HAL_PWREx_EnableUSBReg(void)/HAL_PWREx_DisableUSBReg(void)
[PWR] API Update: Change return type from void to HAL_StatusTypeDef for HAL_PWREx_EnableUSBVoltageDetector(void)/HAL_PWREx_DisableUSBVoltageDetector(void)
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[ADC] Correct conflict with reference manual and LL_ADC_DeInit() procedure in ll_adc.
[ADC] Fix ADC ENGI calibration addresses
[CRYP] Update regarding footprint Optimization switch
[DCMIPP] HAL code quality enhancement for MISRA-C Rule-8.13, 2.4, 8.3
[DCMIPP] Correct for CHM generation
[DMA] Add peripheral flow control check PFREQ (early termination) in HAL_DMA_Init & LL_DMA_Init
[DMA] Correct formatting & spelling
[FLASH] Remove ECC checking for write/erase processes
[GPIO] Use Pos based on CMSIS instead of magic number
[HASH] Remove multiple volatile reads or writes in interrupt handler (for better performance)
[HASH] Fix the busFault issue when the pInBuffer is at the end of a memory region and not 32bit aligned
[HASH] Fix MISRA-C 2012 Warnings
[I2C] Remove extra HAL state not use anymore (HAL_I2C_STATE_ERROR, HAL_I2C_STATE_TIMEOUT, HAL_SMBUS_STATE_ERROR, HAL_SMBUS_STATE_TIMEOUT)
[I2C] Update I2C_Slave_ISR_IT, I2C_Slave_ISR_DMA and I2C_ITSlaveCplt to prevent the call of HAL_I2C_ListenCpltCallback twice
[I2C] Update I2C_WaitOnRXNEFlagUntilTimeout to check I2C_FLAG_AF independently from I2C_FLAG_RXNE
[I2C] Remove unusable code in function HAL_I2C_IsDeviceReady()
[I2C] Update HAL_I2C_IsDeviceReady() to support 10 bit addressing mode.
[I3C] HAL function I3C_ControlBuffer_PriorPreparation : check both cases of the arbitration Enable/Disable and add param to check the size when we have a CCC Direct with DEFBYTE
[ICACHE] HAL_ICACHE_Enable() “how to use” to update
[ICACHE] Update HAL_ICACHE_Invalidate() to prevent launching an invalidation if one has already been launched
[ICACHE] Update HAL_ICACHE_DeInit to set registers to reset value
[IO Manager] Correct swapped mode not activated when only configure XSPI2 on Port 1
[PKA] Remove multiple volatile reads or writes in interrupt handler
[PWR] Add new mode to not clear event in HAL_PWR_EnterSLEEPMode() and HAL_PWR_EnterSTOPMode()
[UART] Avoid RTOF flag to be cleared by a transmit process in polling mode
[UART] Fix incorrect gState check in HAL_UART_RegisterRxEventCallback/HAL_UART_UnRegisterRxEventCallback to allow user Rx Event Callback registration when a transmit is ongoing
[UART] Update initialisation sequence for TXINV, RXINV and TXRXSWAP settings
+

Supported Devices and boards

+
    +
  • STM32H7S7xx, STM32H7S3xx, STM32H7R7xx, STM32H7R3xx devices
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Release Candidate of STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • STM32CubeH7RS HAL/LL Drivers supporting STM32H7RSxx devices: +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DCMIPP, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GFXTIM, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[DCMIPP] API driver update
[MCE] Add support for IRQHandler API
[PKA] Add new API HAL_PKA_ECCMulEx() & HAL_PKA_ECCMulEx_IT()
[PSSI] Add new API HAL_PSSI_ClockConfig()
[RTC] TAMP_ATCKSEL bitfiled extension to 3 bits
[LL RCC] Add missing LL RCC functions for CKPROTR bits
[CRYP] Allow footprint Optimization of HAL CRYP
[HAL] Add define to allow footprint Optimization of HAL CRYP
[ADC] Add new Helper macro for differential mode raw data to voltage conversion
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[LL ADC] Correct driver misalignment vs datasheet on temp sensor calibration data
[CORTEX] Modify existing macros to check preemption priority and sub priority versus current priority grouping
[CORTEX] Add check of MPU region base address alignment vs region size multiple
[CRYP] Update Crypt/Decrypt IT processes to avoid Computation Completed IRQ fires before the DINR pointer increment
[DMA][LL] Missing LL_DMA_SRC_DATAWIDTH_DOUBLEWORD in IS_LL_DMA_SRC_DATA_WIDTH
[DMA][LL] Add initialization for DestWordExchange in LL_DMA_NodeStructInit
[DMA][LL] Add initialization for Mode in LL_DMA_NodeStructInit
[DMA][LL] Add initialization for NodeType when GPDMA and HPDMA are both available
[DMA][LL] Add DestWordExcange in CTR1 bitfields description in LL_DMA_CreateLinkNode
[DMA][LL] Add assert for DestWordExchange in LL_DMA_CreateLinkNode
[DMA][LL] Missing argument for PFREQ in LL_DMA_ConfigChannelTransfer function description
[DMA][LL] Incomplete test for LL_DMA_CreateLinkNode
[DMA][LL] Add LL_DMA_GPDMA_2D_NODE in IS_LL_DMA_LINK_NODETYPE assert
[DMA] Mention in LL_DMA_SetLinkedListAddrOffset that LinkedListAddrOffset is increased by step of 4
[DMA] Incorrect value for Block repeat counter max value in LL_DMA_ConfigBlkCounters description
[DMA2D] HAL/LL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[DTS] HAL/LL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[FDCAN] Fix GetIndex issue in HAL_FDCAN_GetRxMessage
[FLASH] Correct value for OB_DBG_AUTH_ECDSA_SIGN
[FLASH] FLASH API cleanup for ROTSRP and EPOCHSRP
[FMC] Solve compilation warning in hal_nand.c when REGISTER_CALLBACKS=1
[HAL] HSE crystal changed to 24MHz
[HAL] add USE_HAL_PSSI_REGISTER_CALLBACKS in stm32h7rsxx_hal_conf.h
[GFXMMU] HAL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[GFXTIM] HAL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[GFXTIM] HAL code quality enhancement for MISRA-C Rule-11.3
[GFXTIM] HAL code quality enhancement for CodeSonar
[GFXTIM] HAL code comment enhancement for CHM generation
[GPIO] Modify naming from GPIO_PIN_All to GPIO_PIN_ALL
[HASH] Fix spelling error
[HASH] HAL code comment enhancement for CHM generation
[HASH] Remove multiple volatile reads or writes in interrupt handler (for better performance)
[I2C] HAL_I2C_Mem_Write_IT failed after wrong I2C Polling transaction
[I2C] TX IRQ is not disabled after data transfer
[I2C] I2C master receive function failed randomly when interrupt is enabled and NAK is received
[I2C] HAL_I2C_EnableListen_IT used in HAL_I2C_ListenCpltCallback
[I3C LL] Change MODIFY_REG by WRITE_REG in LL_I3C_TransmitData8(), LL_I3C_ControllerHandleMessage(), LL_I3C_ControllerHandleCCC(), LL_I3C_TargetHandleMessage()
[MCE] Correct violations of MISRAC2012-Rule-14.3_b, 15.7, 2.2_c, 8.13 and 13.5
[MCE] HAL code comment enhancement for CHM generation
[FMC] HAL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[FMC] Correct compilation warning in hal_nand.c when REGISTER_CALLBACKS=1
[PKA] Remove multiple volatile reads or writes in interrupt handler (for better performance)
[RCC] Change the VCOL/H selection logic in HAL_RCC_OscConfig
[RTC] Remove all useless RTC Write Protection Disable/Enable calls
[RTC] Bad implementation of HAL_RTC_GET_FLAG() macro
[RTC] Rework of HAL_RTC Macro implementation
[RTC LL] Correct note on RSF
[SAI] Improve audio quality (avoid potential glitch)
[SMBUS] Correct MISRAC2012-Rule-2.2_c issue: Value assigned to variable `sizetoxfer’ is never used
[SMARTCARD] Correct Tx/Rx Fifo sizes in HAL_SMARTCARD driver
[SPDIFRX] Prevent hard fault by checking DMA usage
[SPDIFRX] Tune default SPDIFRX timeout
[TIM LL] Correct doxygen comment for some LL_TIM_ETR_FILTER_FDIVx_Ny constants
[TIM] Change Assert check for HAL_TIM_OC_Start_IT
[TIM] Correct MISRA Warning in TIM_CCxNChannelCmd
[TIM] Remove multiple volatile reads or writes in interrupt handler (for better performance)
[UART] Update initialisation sequence for TXINV, RXINV and TXRXSWAP settings
[USB] HAL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[XSPI] HAL code quality enhancement for MISRA-C Rule-8.13: adding const qualifier
[XSPI] Reset the bits FMODE[1:0] from XSPI_CR register in HAL_XSPI_Abort()
+

Supported Devices and boards

+
    +
  • STM32H7S7xx, STM32H7S3xx, STM32H7R7xx, STM32H7R3xx devices
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Beta Release with API freeze level of STM32CubeH7RS HAL and LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • Beta Release of HAL/LL drivers: +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GFXTIM, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features

+ + + + + + + + + + + + + + + + + +
Headline
[CORTEX] Add dedicated assert macro for Set & Get Priority APIs
[GFXTIM] API freeze
[MCE] API freeze
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[ALL] Fix astyle issues
[ADC] Fix doxygen issues
[ADC] Correction for MISRA rule 8.13
[CORDIC] Correction for MISRA rule 8.13
[CORTEX] Correction for MISRA rule 8.13
[CRC] Correction for MISRA rule 8.13
[CRYP] HAL driver realignment vs latest product
[DMA] Correction for MISRA rule 8.13
[DMA] Correct LL_DMA_GET_INSTANCE
[DMA] Fix doxygen issues
[DMA] Check validity of Request number for Memory to Memory instead of Periph to memory transfers
[DTS] Correction for MISRA rule 8.13
[ETH] Fix astyle & Doxygen issues
[ETH] Correction for MISRA rule 8.13
[EXTI] Correct the way pExtiConfig->GPIOSel is computed in HAL_EXTI_GetConfigLine()
[EXTI] Fix astyle & Doxygen issues
[EXTI] Correction for MISRA rule 8.13
[FLASH] Naming alignment vs latest RM (OPTKCR renamed into OBKCR)
[FLASH] Fix astyle issues (Rename OB_USER_nRST_* in B_USER_NRST_*)
[FLASH] Correction for MISRA C 2012
[FMC] Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback()
[FMC] Correction for MISRA rule 8.13
[FMC] Fix Doxygen issues
[HAL] Correct wrong description of HAL_GetTickFreq() API
[HAL] API alignment vs latest RM : reference to ECC removed and replace RMA by SRAM.
[HAL] Correct HAL_InitTick() erroneous initialization sequence in stm32h7rsxx_hal_timebase_tim_template.c
[HAL] Fix astyle issues
[HAL] Add USE_HAL_PSSI_REGISTER_CALLBACKS switch in stm32h7rsxx_hal_conf_template.h
[HAL] HAL version symbols should be inside header-files not in c-file
[GPIO] Add missing AF0 for PWR
[GPIO] Correction for MISRA rule 8.13
[GPU2D] Correction for MISRA rule 8.13
[HASH] Correction for MISRA rule 8.13
[HASH] Fix astyle and doxygen issues
[I2C] Correct issue with HAL_I2C_IsDeviceReady
[I3C] Correct violation of MISRAC2012-Rule-2.7 and MISRAC2012-Rule-8.13
[I3C] Correct wrong SCLH I3C calculation vs MIPI norm
[I3C] Correct wrong rounding on calculation on SCLL value
[I3C] Fix Doxygen issue
[JPEG] Delete the condition for the call of JPEG_DMA_EndProcess()
[JPEG] Correction for MISRA rule 8.13 and MISRAC2012-Rule-14.3_b
[LPTIM] Correct wrong handling of HAL_LPTIM_ERROR_CB_ID in HAL_LPTIM_UnRegisterCallback
[LPTIM] Add delay before each write to CCMRx to address
[LTDC] Correct issues related to CHM generation
[PKA] Correction MISRA rule 8.13
[PSSI] Add USE_HAL_PSSI_REGISTER_CALLBACKS switch
[PSSI] Remove multiple volatile reads or writes in interrupt handler (for better performance)
[PSSI] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[PSSI] Fix MISRA violations
[PWR] Correction for MISRA rule 8.13
[PWR] LL macro renaming to be aligned vs latest RM
[RAMECC] Correction for MISRA rule 8.13
[RNG] Correction for MISRA rule 8.13
[RCC] PLL1 DIVP division factor zero is allowed
[RCC] Fix LL UTILS compilation dependency on LL_RCC_CalcPLLClockFreq()
[RCC] Cleanup of RCC_LSE_TIMEOUT_VALUE
[RCC] RTCEN shall be enabled/disabled when configuring RTC clock
[RCC] Add RCC prefix before each private constant
[RCC] Correction for MISRA rule 8.13
[RTC] Correct inversion of the output type defines names
[RTC] Remove useless RTC_ICSR_WUTWF bit polling inside HAL_RTCEx_DeactivateWakeUpTimer
[SPI] Correct issues related to CHM generation
[TIM] Remove TIM Automatic Output feature Strange line in LL_TIM_BDTR_Init()
[TIM] Correct systematic channel disabling by HAL_TIM_OC_ConfigChannel()
[TIM] Correct violation of MISRAC2012-Rule-14.3_b & codesonar
[XSPI] Correction of MISRA & Codesonar violations
[XSPI] Update hyperbus structure and APIs to handle 16-bits hyperbus feature
[USB] Fix MISRA issues
[USB] Fix LL clear interrupt and halt channel functions
[USB] Remove useless frame interval setting
[USB] Add support of host HS SPLIT transactions
[USB] Avoid enabling NAK interrupt when USB DMA is used
[UTILS] Correction of Codesonar issue
[WWDG] Fix Doxygen issues
+

Supported Devices and boards

+
    +
  • STM32H7S7xx, STM32H7S3xx, STM32H7R7xx, STM32H7R3xx devices
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Beta Release of STM32CubeH7RS HAL and LL Drivers supporting STM32H7RSxx devices

+

Contents

+
    +
  • Beta release of HAL/LL drivers +
      +

    • HAL: ADC, CEC, CORDIC, CORTEX, CRC, CRS, CRYP, DBGMCU, DLB, DMA (HPDMA and GPDMA), DMA2D, DTS, ETH, EXTI, FDCAN, FLASH, FMC, GPIO, GFXMMU, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MDF, MDIOS, MMC/NAND/NOR/SD/SDRAM/SRAM, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB (HCD and PCD), WWDG, XSPI

      • +

    • LL: ADC, CORDIC, CORTEX, CRC, CRS, DMA, EXTI, FMC, GPIO, I2C, I3C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SDMMC, SPI, SYSTEM, TIM, USART, USB, UTILS, UCPD
      +

      • +
    • +
+

New features

+ + + + + + + + + + + + + + + + + + + + + + + +
Headline
Add interfaces for QSPI, OCTOSPI and XSPI to allow update after SFDP scan
New APIs for AXI interconnect (QoS) management (stm32h7rsxx_hal.h/.c)
Add LL I2C interface to manage new bit STOPFACLR and ADDRACLR
Add LL UCPD interface to manage PWR_UCPDR_UCPD_STBY and PWR_UCPDR_UCPD_DBDIS bits
Add ETH, MDIOS HAL drivers
+

Fixed bugs list

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Headline
[ADC_LL] Correct violation of new MISRAC2012-Rule-14.3_a & MISRAC2012-Rule-14.3_b in ll_adc.h
[ADC_LL] Remove references to ADC channel 19
[CRS] Correct CRS HAL & LL Synchronization sources
[DMA] HPDMA1_TRIGGER GPDMA1_CH15_TCF define incorrect (HAL & LL)
[DMA_HAL] Correct CHM warning in stm32h7rsxx_hal_dma.c
[DMA_HAL] Add missing configuration of destination word exchange in HAL_DMAEx_ConfigDataHandling
[DMA_LL] Add double word handling
[DMA_LL] Use LL_AHB1_GRP1_ForceReset/LL_AHB1_GRP1_ReleaseReset in LL_DMA_DeInit
[DMA_LL] Correct mismatch between GPDMA1 and HPDMA1 in LL_DMA_GET_CHANNEL_INSTANCE
[DMA_LL] Correct DMAx parameter description in function header
[FDCAN_HAL] FDCAN HAL driver GetIndex issue in HAL_FDCAN_GetRxMessage() not correctly fixed, incorrect test plan
[I2C_HAL] HAL not thread safe (delay issue when using pre-emptive kernel)
[I2C_HAL] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[I2C_LL] Improve HAL code quality for MISRA-C Rule-8.13: adding const qualifier
[I2C_HAL] Improve HAL code quality for MISRA-C Rule-8.13: adding const qualifier
[I2S_HAL] MISRA-C2012 Rule 2.2_c warning
[I3C_LL] Correct violation of new MISRAC2012-Rule-14.3_a in ll_i3c.c
[IRDA_HAL] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[PWR_HAL] PWR UCPD dead battery enable/disable is inverted
[RCC_HAL] Wrong call to RCC_PLL2_GetVCOOutputFreq() in HAL_RCC_GetPLL3QFreq() and HAL_RCC_GetPLL3RFreq()
[RCC_HAL] Remove HAL_RCC_GetPLL1TFreq() & HAL_RCC_GetPLL3TFreq() since PLL1T and PLL3T have no output
[RTC_BKP_HAL] Fix HAL_GetTick() timeout vulnerability
[RTC_BKP_HAL] Rename RTC_WKUP_IRQHandler and TAMP_STAMP_IRQHandler handler to follow RM naming
[RTC_BKP_HAL] Wrong bit field use to disable SSRU IT
[RTC_BKP_HAL] Rename some functions and defines for a more appropriate naming
[RTC_BKP_LL] Replace SET_BIT macro by WRITE_REG when possible to optimize registers access
[SMBUS_HAL] Improve HAL code quality for MISRA-C Rule-8.13: adding const qualifier
[SDMMC_HAL] Correct violation of MISRAC2012-Rule-2.2_c in hal_sd.c
[SMARTCARD_HAL] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[SPI] Correct MISRA-C2012 Rule 2.2_c warning
[SPI_HAL] SPI_BAUDRATEPRESCALER_BYPASS case not taken into account in STM32U5 spi hal driver
[SPI_HAL] Code Improvements after miscellaneous issues
[SPI_HAL] Fix remaining Misra 8.13 rule inside extended API and internal functions
[TIM_LL ] Correct __LL_TIM_CALC_PSC non rounded result
[TIM_LL] Fix CHM generated warning
[TIM_LL ] Correct CHM warning
[TIM_HAL] Remove __HAL_LOCK() from HAL_xxx_RegisterCallback()/HAL_xxx_UnRegisterCallback()
[TIM_HAL] Correct TIM exported functions group out of TIM LL driver group
[UART_HAL] Improve HAL code quality for MISRA-C Rule-8.13: adding const qualifier
[UART_HAL] Improve UART_WaitOnFlagUntilTimeout when UART errors
[UART_HAL] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[UART_HAL] Correct violation of new MISRAC2012-Rule-14.3_a & MISRAC2012-Rule-14.3_b
[USART_HAL] Remove HAL DMA dependency thanks to the HAL_DMA_MODULE_ENABLED define
[USART_LL] Improve LL code quality for MISRA-C Rule-8.13: adding const qualifier
[XSPI_HAL] Function HAL_XSPI_AutoPolling must return timeout information
+

Known Limitations

+
    +
  • DCMIPP, GFXTIM and MCE HAL drivers are still in Alpha version (functional drivers, no API freeze).
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+
+
+
+ +
+

Main Changes

+

Alpha Release of STM32CubeH7RS Firmware package supporting STM32H7RSxx devices

+

Contents

+
    +
  • Alpha release of HAL/LL drivers +
      +

    • HAL: ADC, CEC, CORTEX, CORDIC, CORTEX, CRC, CRS, CRYP, DCMIPP, DLB, DMA, DMA2D, DTS, EXTI, FDCAN, FLASH, FMC, GPIO, GFXTIM, GFXMMU, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB, WWDG, XSPI

      • +

    • LL: ADC, CRC, DMA, EXTI, GPIO, I2C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SPI, TIM, USART, UTILS, UCPD
      +

      • +
    • +
+

Fixed bugs list

+ + + + + + + + + + + + + + +
Headline
[RCC] Cleanup of RCC_LSE_TIMEOUT_VALUE
[FLASH] New LL FLASH API to manage update of OB to select I2C1 vs I3C1
+

Known Limitations

+
    +
  • Alpha release of HAL/LL Drivers (not fully validation, no API freeze)
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+
+
+
+ +
+

Main Changes

+

Release Candidate of STM32CubeH7RS Firmware package supporting STM32H7RSxx devices

+

Contents

+
    +
  • Preliminary release of HAL/LL drivers +
      +

    • HAL: ADC, CEC, CORTEX, CORDIC, CORTEX, CRC, CRS, CRYP, DCMIPP, DLB, DMA, DMA2D, DTS, EXTI, FDCAN, FLASH, FMC, GPIO, GFXTIM, GFXMMU, GPU2D, HASH, I2C, I3C, I2S, ICACHE, IRDA, IWDG, JPEG, LPTIM, LTDC, MCE, MDF, PKA, PSSI, PWR, RAMECC, RCC, RNG, RTC, SAI, SBS, SPDIFRX, SMARTCARD, SMBUS, SPI, TIM, UART, USART, USB, WWDG, XSPI

      • +

    • LL: ADC, CRC, DMA, EXTI, GPIO, I2C, ICACHE, LPTIM, LPUART, PKA, PWR, RCC, RNG, RTC, SPI, TIM, USART, UTILS, UCPD
      +

      • +
    • +
+

Known Limitations

+
    +
  • ETH, MDIOS drivers & MW not available
    • +
  • Alpha release of HAL/LL Drivers (not fully validation, no API freeze)
    • +
  • LL drivers present but mostly not tested
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+
+
+
+
+
+
+
+

For complete documentation on STM32 Microcontrollers , visit: www.st.com/stm32

+

This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.

+
+

Info

+
+
+
+ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/Legacy/stm32_hal_legacy.h b/stm32cube/stm32h7rsxx/drivers/include/Legacy/stm32_hal_legacy.h new file mode 100644 index 000000000..d742ad138 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/Legacy/stm32_hal_legacy.h @@ -0,0 +1,4340 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32H7) || defined(STM32MP1) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#endif /* STM32H7 || STM32MP1 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define ADC_CHANNEL_VCORE ADC_CHANNEL_VDDCORE +#endif /* STM32H5 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM + input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif + +#if defined(STM32U5) +#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32H5) || defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for + inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for + inter STM32 series compatibility */ +#endif +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32H5) +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM2_OUT DAC_TRIGGER_LPTIM2_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \ + defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) || defined(STM32C0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#define OB_USER_SRAM134_RST OB_USER_SRAM_RST +#define OB_SRAM134_RST_ERASE OB_SRAM_RST_ERASE +#define OB_SRAM134_RST_NOT_ERASE OB_SRAM_RST_NOT_ERASE +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + +#if defined(STM32H5) +#define SYSCFG_IT_FPU_IOC SBS_IT_FPU_IOC +#define SYSCFG_IT_FPU_DZC SBS_IT_FPU_DZC +#define SYSCFG_IT_FPU_UFC SBS_IT_FPU_UFC +#define SYSCFG_IT_FPU_OFC SBS_IT_FPU_OFC +#define SYSCFG_IT_FPU_IDC SBS_IT_FPU_IDC +#define SYSCFG_IT_FPU_IXC SBS_IT_FPU_IXC + +#define SYSCFG_BREAK_FLASH_ECC SBS_BREAK_FLASH_ECC +#define SYSCFG_BREAK_PVD SBS_BREAK_PVD +#define SYSCFG_BREAK_SRAM_ECC SBS_BREAK_SRAM_ECC +#define SYSCFG_BREAK_LOCKUP SBS_BREAK_LOCKUP + +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 VREFBUF_VOLTAGE_SCALE0 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_VOLTAGE_SCALE1 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE2 VREFBUF_VOLTAGE_SCALE2 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE3 VREFBUF_VOLTAGE_SCALE3 + +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE VREFBUF_HIGH_IMPEDANCE_DISABLE +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_HIGH_IMPEDANCE_ENABLE + +#define SYSCFG_FASTMODEPLUS_PB6 SBS_FASTMODEPLUS_PB6 +#define SYSCFG_FASTMODEPLUS_PB7 SBS_FASTMODEPLUS_PB7 +#define SYSCFG_FASTMODEPLUS_PB8 SBS_FASTMODEPLUS_PB8 +#define SYSCFG_FASTMODEPLUS_PB9 SBS_FASTMODEPLUS_PB9 + +#define SYSCFG_ETH_MII SBS_ETH_MII +#define SYSCFG_ETH_RMII SBS_ETH_RMII +#define IS_SYSCFG_ETHERNET_CONFIG IS_SBS_ETHERNET_CONFIG + +#define SYSCFG_MEMORIES_ERASE_FLAG_IPMEE SBS_MEMORIES_ERASE_FLAG_IPMEE +#define SYSCFG_MEMORIES_ERASE_FLAG_MCLR SBS_MEMORIES_ERASE_FLAG_MCLR +#define IS_SYSCFG_MEMORIES_ERASE_FLAG IS_SBS_MEMORIES_ERASE_FLAG + +#define IS_SYSCFG_CODE_CONFIG IS_SBS_CODE_CONFIG + +#define SYSCFG_MPU_NSEC SBS_MPU_NSEC +#define SYSCFG_VTOR_NSEC SBS_VTOR_NSEC +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define SYSCFG_SAU SBS_SAU +#define SYSCFG_MPU_SEC SBS_MPU_SEC +#define SYSCFG_VTOR_AIRCR_SEC SBS_VTOR_AIRCR_SEC +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#else +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#endif /* __ARM_FEATURE_CMSE */ + +#define SYSCFG_CLK SBS_CLK +#define SYSCFG_CLASSB SBS_CLASSB +#define SYSCFG_FPU SBS_FPU +#define SYSCFG_ALL SBS_ALL + +#define SYSCFG_SEC SBS_SEC +#define SYSCFG_NSEC SBS_NSEC + +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE __HAL_SBS_FPU_INTERRUPT_ENABLE +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE __HAL_SBS_FPU_INTERRUPT_DISABLE + +#define __HAL_SYSCFG_BREAK_ECC_LOCK __HAL_SBS_BREAK_ECC_LOCK +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK __HAL_SBS_BREAK_LOCKUP_LOCK +#define __HAL_SYSCFG_BREAK_PVD_LOCK __HAL_SBS_BREAK_PVD_LOCK +#define __HAL_SYSCFG_BREAK_SRAM_ECC_LOCK __HAL_SBS_BREAK_SRAM_ECC_LOCK + +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE __HAL_SBS_FASTMODEPLUS_ENABLE +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE __HAL_SBS_FASTMODEPLUS_DISABLE + +#define __HAL_SYSCFG_GET_MEMORIES_ERASE_STATUS __HAL_SBS_GET_MEMORIES_ERASE_STATUS +#define __HAL_SYSCFG_CLEAR_MEMORIES_ERASE_STATUS __HAL_SBS_CLEAR_MEMORIES_ERASE_STATUS + +#define IS_SYSCFG_FPU_INTERRUPT IS_SBS_FPU_INTERRUPT +#define IS_SYSCFG_BREAK_CONFIG IS_SBS_BREAK_CONFIG +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE IS_VREFBUF_VOLTAGE_SCALE +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE IS_VREFBUF_HIGH_IMPEDANCE +#define IS_SYSCFG_VREFBUF_TRIMMING IS_VREFBUF_TRIMMING +#define IS_SYSCFG_FASTMODEPLUS IS_SBS_FASTMODEPLUS +#define IS_SYSCFG_ITEMS_ATTRIBUTES IS_SBS_ITEMS_ATTRIBUTES +#define IS_SYSCFG_ATTRIBUTES IS_SBS_ATTRIBUTES +#define IS_SYSCFG_LOCK_ITEMS IS_SBS_LOCK_ITEMS + +#define HAL_SYSCFG_VREFBUF_VoltageScalingConfig HAL_VREFBUF_VoltageScalingConfig +#define HAL_SYSCFG_VREFBUF_HighImpedanceConfig HAL_VREFBUF_HighImpedanceConfig +#define HAL_SYSCFG_VREFBUF_TrimmingConfig HAL_VREFBUF_TrimmingConfig +#define HAL_SYSCFG_EnableVREFBUF HAL_EnableVREFBUF +#define HAL_SYSCFG_DisableVREFBUF HAL_DisableVREFBUF + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SBS_EnableIOAnalogSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SBS_DisableIOAnalogSwitchBooster +#define HAL_SYSCFG_ETHInterfaceSelect HAL_SBS_ETHInterfaceSelect + +#define HAL_SYSCFG_Lock HAL_SBS_Lock +#define HAL_SYSCFG_GetLock HAL_SBS_GetLock + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define HAL_SYSCFG_ConfigAttributes HAL_SBS_ConfigAttributes +#define HAL_SYSCFG_GetConfigAttributes HAL_SBS_GetConfigAttributes +#endif /* __ARM_FEATURE_CMSE */ + +#endif /* STM32H5 */ + + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \ + STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || \ + defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) || defined(STM32H5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#endif /* STM32U5 || STM32H5 */ +#if defined(STM32U5) +#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP +#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#define GTZC_PERIPH_LTDC GTZC_PERIPH_LTDCUSB +#endif /* STM32U5 */ +#if defined(STM32H5) +#define GTZC_PERIPH_DAC12 GTZC_PERIPH_DAC1 +#define GTZC_PERIPH_ADC12 GTZC_PERIPH_ADC +#define GTZC_PERIPH_USBFS GTZC_PERIPH_USB +#endif /* STM32H5 */ +#if defined(STM32H5) || defined(STM32U5) +#define GTZC_MCPBB_NB_VCTR_REG_MAX GTZC_MPCBB_NB_VCTR_REG_MAX +#define GTZC_MCPBB_NB_LCK_VCTR_REG_MAX GTZC_MPCBB_NB_LCK_VCTR_REG_MAX +#define GTZC_MCPBB_SUPERBLOCK_UNLOCKED GTZC_MPCBB_SUPERBLOCK_UNLOCKED +#define GTZC_MCPBB_SUPERBLOCK_LOCKED GTZC_MPCBB_SUPERBLOCK_LOCKED +#define GTZC_MCPBB_BLOCK_NSEC GTZC_MPCBB_BLOCK_NSEC +#define GTZC_MCPBB_BLOCK_SEC GTZC_MPCBB_BLOCK_SEC +#define GTZC_MCPBB_BLOCK_NPRIV GTZC_MPCBB_BLOCK_NPRIV +#define GTZC_MCPBB_BLOCK_PRIV GTZC_MPCBB_BLOCK_PRIV +#define GTZC_MCPBB_LOCK_OFF GTZC_MPCBB_LOCK_OFF +#define GTZC_MCPBB_LOCK_ON GTZC_MPCBB_LOCK_ON +#endif /* STM32H5 || STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \ + defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H5) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_BKP_SRAM TAMP_DEVICESECRETS_ERASE_BKPSRAM +#endif /* STM32H5 || STM32H7RS */ + +#if defined(STM32WBA) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_SRAM2 TAMP_DEVICESECRETS_ERASE_SRAM2 +#define TAMP_SECRETDEVICE_ERASE_RHUK TAMP_DEVICESECRETS_ERASE_RHUK +#define TAMP_SECRETDEVICE_ERASE_ICACHE TAMP_DEVICESECRETS_ERASE_ICACHE +#define TAMP_SECRETDEVICE_ERASE_SAES_AES_HASH TAMP_DEVICESECRETS_ERASE_SAES_AES_HASH +#define TAMP_SECRETDEVICE_ERASE_PKA_SRAM TAMP_DEVICESECRETS_ERASE_PKA_SRAM +#define TAMP_SECRETDEVICE_ERASE_ALL TAMP_DEVICESECRETS_ERASE_ALL +#endif /* STM32WBA */ + +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_DISABLE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_ENABLE TAMP_SECRETDEVICE_ERASE_ALL +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +#if defined(STM32F7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 */ + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ + +#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0) +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 || STM32L0 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +#if defined(STM32U5) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to + the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from + MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus + or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status + of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and + transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input + frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control + de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control + activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status + (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and + status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +#define ETH_TxPacketConfig ETH_TxPacketConfigTypeDef /* Transmit Packet Configuration structure definition */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \ + HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : \ + HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \ + defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) ((cmd == ENABLE)? \ + HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \ + HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \ + defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \ + defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || + STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \ + defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_SRAM6_PAGE1_STOP_RETENTION PWR_SRAM6_PAGE1_STOP +#define PWR_SRAM6_PAGE2_STOP_RETENTION PWR_SRAM6_PAGE2_STOP +#define PWR_SRAM6_PAGE3_STOP_RETENTION PWR_SRAM6_PAGE3_STOP +#define PWR_SRAM6_PAGE4_STOP_RETENTION PWR_SRAM6_PAGE4_STOP +#define PWR_SRAM6_PAGE5_STOP_RETENTION PWR_SRAM6_PAGE5_STOP +#define PWR_SRAM6_PAGE6_STOP_RETENTION PWR_SRAM6_PAGE6_STOP +#define PWR_SRAM6_PAGE7_STOP_RETENTION PWR_SRAM6_PAGE7_STOP +#define PWR_SRAM6_PAGE8_STOP_RETENTION PWR_SRAM6_PAGE8_STOP +#define PWR_SRAM6_FULL_STOP_RETENTION PWR_SRAM6_FULL_STOP + + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP +#define PWR_JPEGRAM_FULL_STOP_RETENTION PWR_JPEGRAM_FULL_STOP + + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN +#define PWR_SRAM6_FULL_RUN_RETENTION PWR_SRAM6_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define HAL_RTCEx_SetBoothardwareKey HAL_RTCEx_LockBootHardwareKey +#define HAL_RTCEx_BKUPBlock_Enable HAL_RTCEx_BKUPBlock +#define HAL_RTCEx_BKUPBlock_Disable HAL_RTCEx_BKUPUnblock +#define HAL_RTCEx_Erase_SecretDev_Conf HAL_RTCEx_ConfigEraseDeviceSecrets +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \ + defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \ + defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \ + HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \ + } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \ + HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \ + } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \ + HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \ + defined(STM32WL) || defined(STM32C0) || defined(STM32H7RS) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 + +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE + +#define RCC_PLLSOURCE_NONE RCC_PLL1_SOURCE_NONE +#define RCC_PLLSOURCE_HSI RCC_PLL1_SOURCE_HSI +#define RCC_PLLSOURCE_CSI RCC_PLL1_SOURCE_CSI +#define RCC_PLLSOURCE_HSE RCC_PLL1_SOURCE_HSE +#define RCC_PLLVCIRANGE_0 RCC_PLL1_VCIRANGE_0 +#define RCC_PLLVCIRANGE_1 RCC_PLL1_VCIRANGE_1 +#define RCC_PLLVCIRANGE_2 RCC_PLL1_VCIRANGE_2 +#define RCC_PLLVCIRANGE_3 RCC_PLL1_VCIRANGE_3 +#define RCC_PLL1VCOWIDE RCC_PLL1_VCORANGE_WIDE +#define RCC_PLL1VCOMEDIUM RCC_PLL1_VCORANGE_MEDIUM + +#define IS_RCC_PLLSOURCE IS_RCC_PLL1_SOURCE +#define IS_RCC_PLLRGE_VALUE IS_RCC_PLL1_VCIRGE_VALUE +#define IS_RCC_PLLVCORGE_VALUE IS_RCC_PLL1_VCORGE_VALUE +#define IS_RCC_PLLCLOCKOUT_VALUE IS_RCC_PLL1_CLOCKOUT_VALUE +#define IS_RCC_PLL_FRACN_VALUE IS_RCC_PLL1_FRACN_VALUE +#define IS_RCC_PLLM_VALUE IS_RCC_PLL1_DIVM_VALUE +#define IS_RCC_PLLN_VALUE IS_RCC_PLL1_MULN_VALUE +#define IS_RCC_PLLP_VALUE IS_RCC_PLL1_DIVP_VALUE +#define IS_RCC_PLLQ_VALUE IS_RCC_PLL1_DIVQ_VALUE +#define IS_RCC_PLLR_VALUE IS_RCC_PLL1_DIVR_VALUE + +#define __HAL_RCC_PLL_ENABLE __HAL_RCC_PLL1_ENABLE +#define __HAL_RCC_PLL_DISABLE __HAL_RCC_PLL1_DISABLE +#define __HAL_RCC_PLL_FRACN_ENABLE __HAL_RCC_PLL1_FRACN_ENABLE +#define __HAL_RCC_PLL_FRACN_DISABLE __HAL_RCC_PLL1_FRACN_DISABLE +#define __HAL_RCC_PLL_CONFIG __HAL_RCC_PLL1_CONFIG +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG __HAL_RCC_PLL1_PLLSOURCE_CONFIG +#define __HAL_RCC_PLL_DIVM_CONFIG __HAL_RCC_PLL1_DIVM_CONFIG +#define __HAL_RCC_PLL_FRACN_CONFIG __HAL_RCC_PLL1_FRACN_CONFIG +#define __HAL_RCC_PLL_VCIRANGE __HAL_RCC_PLL1_VCIRANGE +#define __HAL_RCC_PLL_VCORANGE __HAL_RCC_PLL1_VCORANGE +#define __HAL_RCC_GET_PLL_OSCSOURCE __HAL_RCC_GET_PLL1_OSCSOURCE +#define __HAL_RCC_PLLCLKOUT_ENABLE __HAL_RCC_PLL1_CLKOUT_ENABLE +#define __HAL_RCC_PLLCLKOUT_DISABLE __HAL_RCC_PLL1_CLKOUT_DISABLE +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG __HAL_RCC_GET_PLL1_CLKOUT_CONFIG + +#define __HAL_RCC_PLL2FRACN_ENABLE __HAL_RCC_PLL2_FRACN_ENABLE +#define __HAL_RCC_PLL2FRACN_DISABLE __HAL_RCC_PLL2_FRACN_DISABLE +#define __HAL_RCC_PLL2CLKOUT_ENABLE __HAL_RCC_PLL2_CLKOUT_ENABLE +#define __HAL_RCC_PLL2CLKOUT_DISABLE __HAL_RCC_PLL2_CLKOUT_DISABLE +#define __HAL_RCC_PLL2FRACN_CONFIG __HAL_RCC_PLL2_FRACN_CONFIG +#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG __HAL_RCC_GET_PLL2_CLKOUT_CONFIG + +#define __HAL_RCC_PLL3FRACN_ENABLE __HAL_RCC_PLL3_FRACN_ENABLE +#define __HAL_RCC_PLL3FRACN_DISABLE __HAL_RCC_PLL3_FRACN_DISABLE +#define __HAL_RCC_PLL3CLKOUT_ENABLE __HAL_RCC_PLL3_CLKOUT_ENABLE +#define __HAL_RCC_PLL3CLKOUT_DISABLE __HAL_RCC_PLL3_CLKOUT_DISABLE +#define __HAL_RCC_PLL3FRACN_CONFIG __HAL_RCC_PLL3_FRACN_CONFIG +#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG __HAL_RCC_GET_PLL3_CLKOUT_CONFIG + +#define RCC_PLL2VCIRANGE_0 RCC_PLL2_VCIRANGE_0 +#define RCC_PLL2VCIRANGE_1 RCC_PLL2_VCIRANGE_1 +#define RCC_PLL2VCIRANGE_2 RCC_PLL2_VCIRANGE_2 +#define RCC_PLL2VCIRANGE_3 RCC_PLL2_VCIRANGE_3 + +#define RCC_PLL2VCOWIDE RCC_PLL2_VCORANGE_WIDE +#define RCC_PLL2VCOMEDIUM RCC_PLL2_VCORANGE_MEDIUM + +#define RCC_PLL2SOURCE_NONE RCC_PLL2_SOURCE_NONE +#define RCC_PLL2SOURCE_HSI RCC_PLL2_SOURCE_HSI +#define RCC_PLL2SOURCE_CSI RCC_PLL2_SOURCE_CSI +#define RCC_PLL2SOURCE_HSE RCC_PLL2_SOURCE_HSE + +#define RCC_PLL3VCIRANGE_0 RCC_PLL3_VCIRANGE_0 +#define RCC_PLL3VCIRANGE_1 RCC_PLL3_VCIRANGE_1 +#define RCC_PLL3VCIRANGE_2 RCC_PLL3_VCIRANGE_2 +#define RCC_PLL3VCIRANGE_3 RCC_PLL3_VCIRANGE_3 + +#define RCC_PLL3VCOWIDE RCC_PLL3_VCORANGE_WIDE +#define RCC_PLL3VCOMEDIUM RCC_PLL3_VCORANGE_MEDIUM + +#define RCC_PLL3SOURCE_NONE RCC_PLL3_SOURCE_NONE +#define RCC_PLL3SOURCE_HSI RCC_PLL3_SOURCE_HSI +#define RCC_PLL3SOURCE_CSI RCC_PLL3_SOURCE_CSI +#define RCC_PLL3SOURCE_HSE RCC_PLL3_SOURCE_HSE + + +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || \ + defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ + defined (STM32WBA) || defined (STM32H5) || \ + defined (STM32C0) || defined (STM32H7RS) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \ + defined (STM32H7) || \ + defined (STM32L0) || defined (STM32L1) || \ + defined (STM32WB) +#define __HAL_RTC_TAMPER_GET_IT __HAL_RTC_TAMPER_GET_FLAG +#endif + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +#if defined (STM32H5) +#define __HAL_RCC_RTCAPB_CLK_ENABLE __HAL_RCC_RTC_CLK_ENABLE +#define __HAL_RCC_RTCAPB_CLK_DISABLE __HAL_RCC_RTC_CLK_DISABLE +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 + +#define TIM_OCMODE_ASSYMETRIC_PWM1 TIM_OCMODE_ASYMMETRIC_PWM1 +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_OCMODE_ASYMMETRIC_PWM2 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32F7) +#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE +#endif /* STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h b/stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h new file mode 100644 index 000000000..ae6b8c8cc --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h @@ -0,0 +1,53 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @author MCD Application Team + * @brief STM32 assert template file. + * This file should be copied to the application folder and renamed + * to stm32_assert.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_ASSERT_H +#define STM32_ASSERT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_ASSERT_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal.h new file mode 100644 index 000000000..8c6ac841d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal.h @@ -0,0 +1,767 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_H +#define STM32H7RSxx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_conf.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +/** + * @brief HAL Tick frequency + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup REV_ID device revision ID + * @{ + */ +#define REV_ID_A 0x1003U /*!< STM32H7Rx/Sx rev.A */ +/** + * @} + */ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ +/** + * @brief STM32H7RSxx HAL Driver version number + */ +#define STM32H7RSXX_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define STM32H7RSXX_HAL_VERSION_SUB1 (0x00U) /*!< [23:16] sub1 version */ +#define STM32H7RSXX_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define STM32H7RSXX_HAL_VERSION_RC (0x04U) /*!< [7:0] release candidate */ +#define STM32H7RSXX_HAL_VERSION ((STM32H7RSXX_HAL_VERSION_MAIN << 24U)\ + |(STM32H7RSXX_HAL_VERSION_SUB1 << 16U)\ + |(STM32H7RSXX_HAL_VERSION_SUB2 << 8U )\ + |(STM32H7RSXX_HAL_VERSION_RC)) +/** + * @} + */ + +/** @defgroup SBS_Exported_Constants SBS Exported Constants + * @{ + */ + +/** @defgroup SBS_HDPL_Value HDPL Value + * @{ + */ +#define SBS_HDPL_VALUE_0 0x000000B4U /*!< Hide protection level 0 */ +#define SBS_HDPL_VALUE_1 0x00000051U /*!< Hide protection level 1 */ +#define SBS_HDPL_VALUE_2 0x0000008AU /*!< Hide protection level 2 */ +#define SBS_HDPL_VALUE_3 0x0000006FU /*!< Hide protection level 3 */ +/** + * @} + */ + +/** @defgroup SBS_Timer_Break_Inputs Timer Break Inputs + * @{ + */ +#define SBS_TIMER_BREAK_LOCK_PVD SBS_BKLOCKR_PVD_BL /*!< PVD break lock */ +#define SBS_TIMER_BREAK_LOCK_FLASH SBS_BKLOCKR_FLASHECC_BL /*!< FLASH ECC error break lock */ +#define SBS_TIMER_BREAK_LOCK_CORE SBS_BKLOCKR_CM7LCKUP_BL /*!< Cortex-M7 lockup break lock */ +#define SBS_TIMER_BREAK_LOCK_BKPRAM SBS_BKLOCKR_BKRAMECC_BL /*!< Backup RAM ECC error break lock */ +#define SBS_TIMER_BREAK_LOCK_DTCM SBS_BKLOCKR_DTCMECC_BL /*!< DTCM ECC error break lock */ +#define SBS_TIMER_BREAK_LOCK_ITCM SBS_BKLOCKR_ITCMECC_BL /*!< ITCM ECC error break lock */ +#define SBS_TIMER_BREAK_LOCK_AXISRAM3 SBS_BKLOCKR_ARAM3ECC_BL /*!< AXISRAM3 ECC error break lock */ +#define SBS_TIMER_BREAK_LOCK_AXISRAM1 SBS_BKLOCKR_ARAM1ECC_BL /*!< AXISRAM1 ECC error break lock */ +/** + * @} + */ + +/** @defgroup SBS_FPU_Interrupts FPU Interrupts + * @{ + */ +#define SBS_IT_FPU_IOC SBS_FPUIMR_FPU_IE_0 /*!< Floating Point Unit Invalid operation Interrupt */ +#define SBS_IT_FPU_DZC SBS_FPUIMR_FPU_IE_1 /*!< Floating Point Unit Divide-by-zero Interrupt */ +#define SBS_IT_FPU_UFC SBS_FPUIMR_FPU_IE_2 /*!< Floating Point Unit Underflow Interrupt */ +#define SBS_IT_FPU_OFC SBS_FPUIMR_FPU_IE_3 /*!< Floating Point Unit Overflow Interrupt */ +#define SBS_IT_FPU_IDC SBS_FPUIMR_FPU_IE_4 /*!< Floating Point Unit Input denormal Interrupt */ +#define SBS_IT_FPU_IXC SBS_FPUIMR_FPU_IE_5 /*!< Floating Point Unit Inexact Interrupt */ +/** + * @} + */ + +/** @defgroup SBS_Compensation_Cell_Selection Compensation Cell Selection + * @{ + */ +#define SBS_IO_ANALOG_CELL SBS_CCCSR_COMP_EN /*!< Compensation cell for the I/O analog switches */ +#define SBS_IO_XSPI1_CELL SBS_CCCSR_XSPI1_COMP_EN /*!< Compensation cell for the I/O of the XSPI1 */ +#define SBS_IO_XSPI2_CELL SBS_CCCSR_XSPI2_COMP_EN /*!< Compensation cell for the I/O of the XSPI2 */ +/** + * @} + */ + +/** @defgroup SBS_Compensation_Cell_Ready_Selection Compensation Cell Ready Selection + * @{ + */ +#define SBS_IO_ANALOG_CELL_READY SBS_CCCSR_COMP_RDY /*!< Ready flag of compensation cell for the I/O analog switches */ +#define SBS_IO_XSPI1_CELL_READY SBS_CCCSR_XSPI1_COMP_RDY /*!< Ready flag of compensation cell for the I/O of the XSPI1 */ +#define SBS_IO_XSPI2_CELL_READY SBS_CCCSR_XSPI2_COMP_RDY /*!< Ready flag of compensation cell for the I/O of the XSPI2 */ +/** + * @} + */ + +/** @defgroup SBS_IO_Compensation_Code_Config IO Compensation Code config + * @{ + */ +#define SBS_IO_CELL_CODE 0UL /*!< Code from the cell */ +#define SBS_IO_REGISTER_CODE 1UL /*!< Code from the values in the cell code register */ +/** + * @} + */ + +/** @defgroup SBS_IO_HSLV_Selection IO High Speed at Low Voltage Selection + * @{ + */ +#define SBS_IO_ANALOG_HSLV SBS_CCCSR_IOHSLV /*!< High speed at low voltage for the I/O analog switches */ +#define SBS_IO_XSPI1_HSLV SBS_CCCSR_XSPI1_IOHSLV /*!< High speed at low voltage for the I/O of the XSPI1 */ +#define SBS_IO_XSPI2_HSLV SBS_CCCSR_XSPI2_IOHSLV /*!< High speed at low voltage for the I/O of the XSPI2 */ +/** + * @} + */ + +/** @defgroup SBS_Ethernet_PHY_Config Ethernet PHY config + * @{ + */ +#define SBS_ETHERNET_PHY_GMII_OR_MII 0U /*!< GMII or MII */ +#define SBS_ETHERNET_PHY_RMII SBS_PMCR_ETH_PHYSEL_2 /*!< RMII */ +/** + * @} + */ + +/** @defgroup SBS_ECC_AXISRAM_WS_Config ECC AXISRAMs Wait State when ECC=0 config + * @{ + */ +#define SBS_AXISRAM_WS_0 0U /*!< 0 Wait state */ +#define SBS_AXISRAM_WS_1 SBS_PMCR_AXISRAM_WS /*!< 1 Wait state */ +/** + * @} + */ + +/** @defgroup SBS_EXTI_Port EXTI Port configuration + * @{ + */ +#define SBS_EXTI_PIN_PORTA 0x00UL /*!< Port A pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTB 0x01UL /*!< Port B pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTC 0x02UL /*!< Port C pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTD 0x03UL /*!< Port D pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTE 0x04UL /*!< Port E pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTF 0x05UL /*!< Port F pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTG 0x06UL /*!< Port G pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTH 0x07UL /*!< Port H pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTM 0x0CUL /*!< Port M pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTN 0x0DUL /*!< Port N pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTO 0x0EUL /*!< Port O pin input of EXTI event detection */ +#define SBS_EXTI_PIN_PORTP 0x0FUL /*!< Port P pin input of EXTI event detection */ +/** + * @} + */ + +/** @defgroup AXIM_Exported_Constants AXIM Exported Constants + * @{ + */ + +/** @defgroup AXIM_ASIB_READ_ISSUING_CAP AXIM ASIBs Read Issuing Capability + * @{ + */ +#define AXIM_ASIB_READ_ISS_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_ASIB_READ_ISS_FORCE_TO_1 AXIM_ASIB_FNMOD_READ_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ + +/** @defgroup AXIM_ASIB_WRITE_ISSUING_CAP AXIM ASIBs Write Issuing Capability + * @{ + */ +#define AXIM_ASIB_WRITE_ISS_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_ASIB_WRITE_ISS_FORCE_TO_1 AXIM_ASIB_FNMOD_WRITE_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ + +/** @defgroup AXIM_AMIB_READ_ISSUING_CAP AXIM AMIBs Read Issuing Capability + * @{ + */ +#define AXIM_AMIB_READ_ISS_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_AMIB_READ_ISS_FORCE_TO_1 AXIM_AMIB_FNMOD_READ_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ + +/** @defgroup AXIM_AMIB_WRITE_ISSUING_CAP AXIM AMIBs Write Issuing Capability + * @{ + */ +#define AXIM_AMIB_WRITE_ISS_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_AMIB_WRITE_ISS_FORCE_TO_1 AXIM_AMIB_FNMOD_WRITE_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ + +/** @defgroup AXIM_AMIB_READ_ISSUING_BM_CAP AXIM AMIBs Read Issuing Bus Matrix Capability + * @{ + */ +#define AXIM_AMIB_READ_ISS_BM_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_AMIB_READ_ISS_BM_FORCE_TO_1 AXIM_AMIB_FNMOD_READ_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ + +/** @defgroup AXIM_AMIB_WRITE_ISSUING_BM_CAP AXIM AMIBs Write Issuing Bus Matrix Capability + * @{ + */ +#define AXIM_AMIB_WRITE_ISS_BM_NORMAL 0U /*!< Normal issuing capability */ +#define AXIM_AMIB_WRITE_ISS_BM_FORCE_TO_1 AXIM_AMIB_FNMOD_WRITE_ISS /*!< Force issuing capability to 1 */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup DBGMCU_Exported_Macros DBGMCU Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#define __HAL_DBGMCU_FREEZE_GPDMA0() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_0) +#define __HAL_DBGMCU_UNFREEZE_GPDMA0() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_0) + +#define __HAL_DBGMCU_FREEZE_GPDMA1() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_1) +#define __HAL_DBGMCU_UNFREEZE_GPDMA1() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_1) + +#define __HAL_DBGMCU_FREEZE_GPDMA2() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_2) +#define __HAL_DBGMCU_UNFREEZE_GPDMA2() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_2) + +#define __HAL_DBGMCU_FREEZE_GPDMA3() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_3) +#define __HAL_DBGMCU_UNFREEZE_GPDMA3() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_3) + +#define __HAL_DBGMCU_FREEZE_GPDMA4() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_4) +#define __HAL_DBGMCU_UNFREEZE_GPDMA4() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_4) + +#define __HAL_DBGMCU_FREEZE_GPDMA5() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_5) +#define __HAL_DBGMCU_UNFREEZE_GPDMA5() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_5) + +#define __HAL_DBGMCU_FREEZE_GPDMA6() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_6) +#define __HAL_DBGMCU_UNFREEZE_GPDMA6() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_6) + +#define __HAL_DBGMCU_FREEZE_GPDMA7() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_7) +#define __HAL_DBGMCU_UNFREEZE_GPDMA7() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_7) + +#define __HAL_DBGMCU_FREEZE_GPDMA8() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_8) +#define __HAL_DBGMCU_UNFREEZE_GPDMA8() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_8) + +#define __HAL_DBGMCU_FREEZE_GPDMA9() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_9) +#define __HAL_DBGMCU_UNFREEZE_GPDMA9() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_9) + +#define __HAL_DBGMCU_FREEZE_GPDMA10() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_10) +#define __HAL_DBGMCU_UNFREEZE_GPDMA10() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_10) + +#define __HAL_DBGMCU_FREEZE_GPDMA11() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_11) +#define __HAL_DBGMCU_UNFREEZE_GPDMA11() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_11) + +#define __HAL_DBGMCU_FREEZE_GPDMA12() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_12) +#define __HAL_DBGMCU_UNFREEZE_GPDMA12() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_12) + +#define __HAL_DBGMCU_FREEZE_GPDMA13() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_13) +#define __HAL_DBGMCU_UNFREEZE_GPDMA13() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_13) + +#define __HAL_DBGMCU_FREEZE_GPDMA14() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_14) +#define __HAL_DBGMCU_UNFREEZE_GPDMA14() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_14) + +#define __HAL_DBGMCU_FREEZE_GPDMA15() SET_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_15) +#define __HAL_DBGMCU_UNFREEZE_GPDMA15() CLEAR_BIT(DBGMCU->AHB1FZR, DBGMCU_AHB1FZR_GPDMA_15) + +#define __HAL_DBGMCU_FREEZE_HPDMA0() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_0) +#define __HAL_DBGMCU_UNFREEZE_HPDMA0() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_0) + +#define __HAL_DBGMCU_FREEZE_HPDMA1() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_1) +#define __HAL_DBGMCU_UNFREEZE_HPDMA1() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_1) + +#define __HAL_DBGMCU_FREEZE_HPDMA2() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_2) +#define __HAL_DBGMCU_UNFREEZE_HPDMA2() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_2) + +#define __HAL_DBGMCU_FREEZE_HPDMA3() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_3) +#define __HAL_DBGMCU_UNFREEZE_HPDMA3() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_3) + +#define __HAL_DBGMCU_FREEZE_HPDMA4() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_4) +#define __HAL_DBGMCU_UNFREEZE_HPDMA4() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_4) + +#define __HAL_DBGMCU_FREEZE_HPDMA5() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_5) +#define __HAL_DBGMCU_UNFREEZE_HPDMA5() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_5) + +#define __HAL_DBGMCU_FREEZE_HPDMA6() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_6) +#define __HAL_DBGMCU_UNFREEZE_HPDMA6() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_6) + +#define __HAL_DBGMCU_FREEZE_HPDMA7() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_7) +#define __HAL_DBGMCU_UNFREEZE_HPDMA7() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_7) + +#define __HAL_DBGMCU_FREEZE_HPDMA8() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_8) +#define __HAL_DBGMCU_UNFREEZE_HPDMA8() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_8) + +#define __HAL_DBGMCU_FREEZE_HPDMA9() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_9) +#define __HAL_DBGMCU_UNFREEZE_HPDMA9() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_9) + +#define __HAL_DBGMCU_FREEZE_HPDMA10() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_10) +#define __HAL_DBGMCU_UNFREEZE_HPDMA10() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_10) + +#define __HAL_DBGMCU_FREEZE_HPDMA11() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_11) +#define __HAL_DBGMCU_UNFREEZE_HPDMA11() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_11) + +#define __HAL_DBGMCU_FREEZE_HPDMA12() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_12) +#define __HAL_DBGMCU_UNFREEZE_HPDMA12() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_12) + +#define __HAL_DBGMCU_FREEZE_HPDMA13() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_13) +#define __HAL_DBGMCU_UNFREEZE_HPDMA13() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_13) + +#define __HAL_DBGMCU_FREEZE_HPDMA14() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_14) +#define __HAL_DBGMCU_UNFREEZE_HPDMA14() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_14) + +#define __HAL_DBGMCU_FREEZE_HPDMA15() SET_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_15) +#define __HAL_DBGMCU_UNFREEZE_HPDMA15() CLEAR_BIT(DBGMCU->AHB5FZR, DBGMCU_AHB5FZR_HPDMA_15) + +#define __HAL_DBGMCU_FREEZE_I2C1() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C1) +#define __HAL_DBGMCU_UNFREEZE_I2C1() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C1) + +#define __HAL_DBGMCU_FREEZE_I2C2() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C2) +#define __HAL_DBGMCU_UNFREEZE_I2C2() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C2) + +#define __HAL_DBGMCU_FREEZE_I2C3() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C3) +#define __HAL_DBGMCU_UNFREEZE_I2C3() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_I2C3) + +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM2) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM2) + +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM3) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM3) + +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM4) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM4) + +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM5) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM5) + +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM6) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM6) + +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM7) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM7) + +#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM9) +#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM9) + +#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM12) +#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM12) + +#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM13) +#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM13) + +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM14) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_TIM14) + +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM1) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM1) + +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM15) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM15) + +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM16) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM16) + +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM17) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_TIM17) + +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_LPTIM1) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_LPTIM1) + +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM2) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM2) + +#define __HAL_DBGMCU_FREEZE_LPTIM3() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM3) +#define __HAL_DBGMCU_UNFREEZE_LPTIM3() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM3) + +#define __HAL_DBGMCU_FREEZE_LPTIM4() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM4) +#define __HAL_DBGMCU_UNFREEZE_LPTIM4() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM4) + +#define __HAL_DBGMCU_FREEZE_LPTIM5() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM5) +#define __HAL_DBGMCU_UNFREEZE_LPTIM5() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_LPTIM5) + +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_IWDG) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_IWDG) + +#define __HAL_DBGMCU_FREEZE_PWM1() SET_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_PWM1) +#define __HAL_DBGMCU_UNFREEZE_PWM1() CLEAR_BIT(DBGMCU->APB2FZR, DBGMCU_APB2FZR_PWM1) + +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_RTC) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB4FZR, DBGMCU_APB4FZR_RTC) + +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_WWDG) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZR, DBGMCU_APB1FZR_WWDG) + +/** + * @} + */ + +/** @defgroup SBS_Exported_Macros SBS Exported Macros + * @{ + */ + +/** @brief Floating Point Unit interrupt enable/disable macros + * @param __INTERRUPT__ This parameter can be a value of @ref SBS_FPU_Interrupts + */ +#define __HAL_SBS_FPU_INTERRUPT_ENABLE(__INTERRUPT__) do { \ + assert_param(IS_SBS_FPU_INTERRUPT((__INTERRUPT__))); \ + SET_BIT(SBS->FPUIMR, (__INTERRUPT__)); \ + } while(0) + +#define __HAL_SBS_FPU_INTERRUPT_DISABLE(__INTERRUPT__) do { \ + assert_param(IS_SBS_FPU_INTERRUPT((__INTERRUPT__))); \ + CLEAR_BIT(SBS->FPUIMR, (__INTERRUPT__)); \ + } while(0) + +/** @brief Check SBS Memories Erase Status Flags. + * @retval The state of memory erase. + */ +#define __HAL_SBS_GET_MEMORIES_ERASE_STATUS() ((SBS->MESR) & (SBS_MESR_MEF)) + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define VREFBUF_VOLTAGE_SCALE0 VREFBUF_CSR_VRS_OUT1 /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS_OUT2 /*!< Voltage reference scale 1 (VREF_OUT2) */ +#define VREFBUF_VOLTAGE_SCALE2 VREFBUF_CSR_VRS_OUT3 /*!< Voltage reference scale 2 (VREF_OUT3) */ +#define VREFBUF_VOLTAGE_SCALE3 VREFBUF_CSR_VRS_OUT4 /*!< Voltage reference scale 3 (VREF_OUT4) */ + + +#define IS_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == VREFBUF_VOLTAGE_SCALE1) || \ + ((__SCALE__) == VREFBUF_VOLTAGE_SCALE2) || \ + ((__SCALE__) == VREFBUF_VOLTAGE_SCALE3)) + + +/** + * @} + */ + +/** @defgroup VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define VREFBUF_HIGH_IMPEDANCE_DISABLE ((uint32_t)0x00000000) /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +#define IS_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_VREFBUF_TRIMMING(__VALUE__) ((__VALUE__) <= VREFBUF_CCR_TRIM) + +/** + * @} + */ + +/** @addtogroup SBS_Private_Macros + * @{ + */ +#define IS_SBS_FPU_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SBS_IT_FPU_IOC) == SBS_IT_FPU_IOC) || \ + (((__INTERRUPT__) & SBS_IT_FPU_DZC) == SBS_IT_FPU_DZC) || \ + (((__INTERRUPT__) & SBS_IT_FPU_UFC) == SBS_IT_FPU_UFC) || \ + (((__INTERRUPT__) & SBS_IT_FPU_OFC) == SBS_IT_FPU_OFC) || \ + (((__INTERRUPT__) & SBS_IT_FPU_IDC) == SBS_IT_FPU_IDC) || \ + (((__INTERRUPT__) & SBS_IT_FPU_IXC) == SBS_IT_FPU_IXC)) + +#define IS_SBS_HDPL(__LEVEL__) (((__LEVEL__) == SBS_HDPL_VALUE_0) || \ + ((__LEVEL__) == SBS_HDPL_VALUE_1) || \ + ((__LEVEL__) == SBS_HDPL_VALUE_2) || \ + ((__LEVEL__) == SBS_HDPL_VALUE_3)) + +#define IS_SBS_COMPENSATION_CELL(__CELL__) (((__CELL__) == SBS_IO_ANALOG_CELL) || \ + ((__CELL__) == SBS_IO_XSPI1_CELL) || \ + ((__CELL__) == SBS_IO_XSPI2_CELL)) + +#define IS_SBS_COMPENSATION_CELL_READY(__CELL__) (((__CELL__) == SBS_IO_ANALOG_CELL_READY) || \ + ((__CELL__) == SBS_IO_XSPI1_CELL_READY) || \ + ((__CELL__) == SBS_IO_XSPI2_CELL_READY)) + +#define IS_SBS_IOHSLV(__HSLV__) (((__HSLV__) == SBS_IO_ANALOG_HSLV) || \ + ((__HSLV__) == SBS_IO_XSPI1_HSLV) || \ + ((__HSLV__) == SBS_IO_XSPI2_HSLV)) + +#define IS_SBS_EXTI_INPUT(__INPUT__) ((__INPUT__) < 16U) + +#define IS_SBS_EXTI_PIN(__PIN__) (((__PIN__) == SBS_EXTI_PIN_PORTA) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTB) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTC) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTD) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTE) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTF) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTG) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTH) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTM) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTN) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTO) || \ + ((__PIN__) == SBS_EXTI_PIN_PORTP)) +/** + * @} + */ + +/** @addtogroup AXIM_Private_Macros + * @{ + */ +#define IS_AXIM_ASIB_READ_ISS(__ISS__) (((__ISS__) == AXIM_ASIB_READ_ISS_NORMAL) || \ + ((__ISS__) == AXIM_ASIB_READ_ISS_FORCE_TO_1)) + +#define IS_AXIM_ASIB_WRITE_ISS(__ISS__) (((__ISS__) == AXIM_ASIB_WRITE_ISS_NORMAL) || \ + ((__ISS__) == AXIM_ASIB_WRITE_ISS_FORCE_TO_1)) + +#define IS_AXIM_QOS(__QOS__) ((__QOS__) <= AXIM_ASIB_READQOS_AR_QOS) + +#define IS_AXIM_AMIB_READ_ISS(__ISS__) (((__ISS__) == AXIM_AMIB_READ_ISS_NORMAL) || \ + ((__ISS__) == AXIM_AMIB_READ_ISS_FORCE_TO_1)) + +#define IS_AXIM_AMIB_WRITE_ISS(__ISS__) (((__ISS__) == AXIM_AMIB_WRITE_ISS_NORMAL) || \ + ((__ISS__) == AXIM_AMIB_WRITE_ISS_FORCE_TO_1)) + +#define IS_AXIM_AMIB_READ_ISS_BM(__ISS__) (((__ISS__) == AXIM_AMIB_READ_ISS_NORMAL) || \ + ((__ISS__) == AXIM_AMIB_READ_ISS_FORCE_TO_1)) + +#define IS_AXIM_AMIB_WRITE_ISS_BM(__ISS__) (((__ISS__) == AXIM_AMIB_WRITE_ISS_BM_NORMAL) || \ + ((__ISS__) == AXIM_AMIB_WRITE_ISS_BM_FORCE_TO_1)) + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @{ + */ + +/* DBGMCU Peripheral Control functions ***************************************/ +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @{ + */ + +/* SBS Control functions *****************************************************/ +uint32_t HAL_SBS_GetBootAddress(void); + +void HAL_SBS_IncrementHDPLValue(void); +uint32_t HAL_SBS_GetHDPLValue(void); + +void HAL_SBS_OpenAccessPort(void); +void HAL_SBS_OpenDebug(void); +HAL_StatusTypeDef HAL_SBS_ConfigDebugLevel(uint32_t Level); +uint32_t HAL_SBS_GetDebugLevel(void); +void HAL_SBS_UnlockDebugConfig(void); +void HAL_SBS_LockDebugConfig(void); + +void HAL_SBS_ConfigRSSCommand(uint32_t Cmd); +uint32_t HAL_SBS_GetRSSCommand(void); + +void HAL_SBS_EnableIOAnalogBooster(void); +void HAL_SBS_DisableIOAnalogBooster(void); +void HAL_SBS_EnableIOAnalogSwitchVdd(void); +void HAL_SBS_DisableIOAnalogSwitchVdd(void); +void HAL_SBS_ConfigEthernetPHY(uint32_t Config); +void HAL_SBS_ConfigAXISRAMWaitState(uint32_t Config); + +void HAL_SBS_EnableCompensationCell(uint32_t Selection); +void HAL_SBS_DisableCompensationCell(uint32_t Selection); +uint32_t HAL_SBS_GetCompensationCellReadyStatus(uint32_t Selection); +void HAL_SBS_ConfigCompensationCell(uint32_t Selection, uint32_t Code, uint32_t NmosValue, + uint32_t PmosValue); +HAL_StatusTypeDef HAL_SBS_GetCompensationCell(uint32_t Selection, uint32_t *pCode, uint32_t *pNmosValue, + uint32_t *pPmosValue); + +void HAL_SBS_EnableIOSpeedOptimize(uint32_t Selection); +void HAL_SBS_DisableIOSpeedOptimize(uint32_t Selection); + +void HAL_SBS_ConfigTimerBreakInput(uint32_t Input); +uint32_t HAL_SBS_GetTimerBreakInputConfig(void); + +void HAL_SBS_EXTIConfig(uint32_t Exti, uint32_t Port); +uint32_t HAL_SBS_GetEXTIConfig(uint32_t Exti); +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group5 + * @{ + */ + +/* VREFBUF Control functions *************************************************/ +void HAL_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_VREFBUF_Enable(void); +void HAL_VREFBUF_Disable(void); + + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group6 + * @{ + */ + +/* AXIM Configuration functions *************************************************/ +void HAL_AXIM_ASIB_EnablePacking(AXIM_ASIB_TypeDef *AsibInstance); +void HAL_AXIM_ASIB_DisablePacking(AXIM_ASIB_TypeDef *AsibInstance); +void HAL_AXIM_ASIB_IssuingConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t ReadIssuing, + uint32_t WriteIssuing); +void HAL_AXIM_ASIB_ReadQoSConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t QosPriority); +void HAL_AXIM_ASIB_WriteQoSConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t QosPriority); + + +void HAL_AXIM_AMIB_EnablePacking(AXIM_AMIB_TypeDef *AmibInstance); +void HAL_AXIM_AMIB_DisablePacking(AXIM_AMIB_TypeDef *AmibInstance); +void HAL_AXIM_AMIB_IssuingConfig(AXIM_AMIB_TypeDef *AmibInstance, uint32_t ReadIssuing, + uint32_t WriteIssuing); +void HAL_AXIM_AMIB_IssuingConfigBusMatrix(AXIM_AMIB_TypeDef *AmibInstance, uint32_t ReadIssuing, + uint32_t WriteIssuing); +void HAL_AXIM_AMIB_EnableLongBurst(AXIM_AMIB_TypeDef *AmibInstance); +void HAL_AXIM_AMIB_DisableLongBurst(AXIM_AMIB_TypeDef *AmibInstance); +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc.h new file mode 100644 index 000000000..98c98e539 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc.h @@ -0,0 +1,2028 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_adc.h + * @author MCD Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_ADC_H +#define STM32H7RSxx_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/* Include low level driver */ +#include "stm32h7rsxx_ll_adc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief ADC group regular oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ + + uint32_t TriggeredMode; /*!< Selects the regular triggered oversampling mode. + This parameter can be a value of @ref ADC_HAL_EC_OVS_DISCONT_MODE */ + + uint32_t OversamplingStopReset; /*!< Selects the regular oversampling mode. + The oversampling is either temporary stopped or reset upon an injected + sequence interruption. + If oversampling is enabled on both regular and injected groups, this + parameter is discarded and forced to setting + "ADC_REGOVERSAMPLING_RESUMED_MODE" (the oversampling buffer is zeroed + during injection sequence). + This parameter can be a value of @ref ADC_HAL_EC_OVS_SCOPE_REG */ + +} ADC_OversamplingTypeDef; + +/** + * @brief Structure definition of ADC instance and ADC group regular. + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (affects ADC groups regular and injected): ClockPrescaler, Resolution, DataAlign, + * ScanConvMode, EOCSelection, LowPowerAutoWait. + * - Scope ADC group regular: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, + * ExternalTrigConv, ExternalTrigConvEdge, DMAContinuousRequests, Overrun, OversamplingMode, Oversampling, + * SamplingMode. + * @note The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'LowPowerAutoWait', 'DMAContinuousRequests' and 'Oversampling': ADC enabled + * without conversion on going on group regular. + * - For parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going + * on groups regular and injected. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another + * parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous + clock derived from system clock or PLL (Refer to reference manual for list of + clocks available)) and clock prescaler. + This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. + Note: The ADC clock configuration is common to all ADC instances. + Note: In case of usage of channels on injected group, ADC frequency should be + lower than AHB clock frequency /4 for resolution 12 or 10 bits, + AHB clock frequency /3 for resolution 8 bits, + AHB clock frequency /2 for resolution 6 bits. + Note: In case of synchronous clock mode based on HCLK/1, the configuration must + be enabled only if the system clock has a 50% duty clock cycle (APB + prescaler configured inside RCC must be bypassed and PCLK clock must have + 50% duty cycle). Refer to reference manual for details. + Note: In case of usage of asynchronous clock, the selected clock must be + preliminarily enabled at RCC top level. + Note: This parameter can be modified only if all ADC instances are disabled. */ + + uint32_t Resolution; /*!< Configure the ADC resolution. + This parameter can be a value of @ref ADC_HAL_EC_RESOLUTION */ + + uint32_t DataAlign; /*!< Specify ADC data alignment in conversion data register (right or left). + Refer to reference manual for alignments formats versus resolutions. + This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */ + + uint32_t ScanConvMode; /*!< Configure the sequencer of ADC groups regular and injected. + This parameter can be associated to parameter 'DiscontinuousConvMode' to have + main sequence subdivided in successive parts. + If disabled: Conversion is performed in single mode (one channel converted, the + one defined in rank 1). Parameters 'NbrOfConversion' and + 'InjectedNbrOfConversion' are discarded (equivalent to set to 1). + If enabled: Conversions are performed in sequence mode (multiple ranks defined + by 'NbrOfConversion' or 'InjectedNbrOfConversion' and rank of each + channel in sequencer). Scan direction is upward: from rank 1 to + rank 'n'. + This parameter can be a value of @ref ADC_Scan_mode */ + + uint32_t EOCSelection; /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and + interruption: end of unitary conversion or end of sequence conversions. + This parameter can be a value of @ref ADC_EOCSelection. */ + + FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the + previous conversion (for ADC group regular) or previous sequence (for ADC group + injected) has been retrieved by user software, using function HAL_ADC_GetValue() + or HAL_ADCEx_InjectedGetValue(). + This feature automatically adapts the frequency of ADC conversions triggers to + the speed of the system that reads the data. Moreover, this avoids risk of + overrun for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), + HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC + flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended + benefit (except specific case of high load of CPU or DMA transfers which + can justify usage of auto wait). + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, + when ADC conversion data is needed: + use HAL_ADC_PollForConversion() to ensure that conversion is completed and + HAL_ADC_GetValue() to retrieve conversion result and trig another + conversion start. (in case of usage of ADC group injected, use the + equivalent functions HAL_ADCExInjected_Start(), + HAL_ADCEx_InjectedGetValue(), ...). */ + + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) + or continuous mode for ADC group regular, after the first ADC conversion + start trigger occurred (software start or external trigger). This parameter + can be set to ENABLE or DISABLE. */ + + uint32_t NbrOfConversion; /*!< Specify the number of ranks that will be converted within the regular group + sequencer. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Number of ranks in the scan sequence is configurable using this parameter. + Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to + parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'. + Afterwards, when all needed sequencer ranks are set, parameter + 'NbrOfConversion' can be updated without modifying configuration of + sequencer ranks (sequencer ranks above 'NbrOfConversion' are discarded). + - sequencer configured to not fully configurable: + Number of ranks in the scan sequence is defined by number of channels set in + the sequence. This parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. + Note: This parameter must be modified when no conversion is on going on regular + group (ADC disabled, or ADC enabled without continuous mode or external + trigger that could launch a conversion). */ + + FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed + in Complete-sequence/Discontinuous-sequence (main sequence subdivided in + successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter + 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. + If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: On this STM32 series, ADC group regular number of discontinuous + ranks increment is fixed to one-by-one. */ + + uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence + of ADC group regular (parameter NbrOfConversion) will be subdivided. + If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ + + uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion + start. + If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger + is used instead. + This parameter can be a value of @ref ADC_regular_external_trigger_source. + Caution: external trigger source is common to all ADC instances. */ + + uint32_t ExternalTrigConvEdge; /*!< Select the external event edge used to trigger ADC group regular conversion start + If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_regular_external_trigger_edge */ + + uint32_t SamplingMode; /*!< Select the sampling mode to be used for ADC group regular conversion. + This parameter can be a value of @ref ADC_regular_sampling_mode */ + + uint32_t ConversionDataManagement; /*!< Specifies whether the Data conversion data is managed: using the DMA (one shot + or circular), or stored in the DR register or transferred to ADF register. + Note: In continuous mode, DMA must be configured in circular mode. Otherwise + an overrun will be triggered when DMA buffer maximum pointer is reached. + This parameter can be a value of @ref ADC_ConversionDataManagement. + Note: This parameter must be modified when no conversion is on going on both + regular and injected groups (ADC disabled, or ADC enabled without continuous mode + or external trigger that could launch a conversion). */ + + uint32_t Overrun; /*!< Select the behavior in case of overrun: data overwritten or preserved (default). + This parameter applies to ADC group regular only. + This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR. + Note: In case of overrun set to data preserved and usage with programming model + with interruption (HAL_Start_IT()): ADC IRQ handler has to clear end of + conversion flags, this induces the release of the preserved data. If + needed, this data can be saved in function HAL_ADC_ConvCpltCallback(), + placed in user program code (called before end of conversion flags clear) + Note: Error reporting with respect to the conversion mode: + - Usage with ADC conversion by polling for event or interruption: Error is + reported only if overrun is set to data preserved. If overrun is set to + data overwritten, user can willingly not read all the converted data, + this is not considered as an erroneous case. + - Usage with ADC conversion by DMA: Error is reported whatever overrun + setting (DMA is expected to process all data from data register). */ + + FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is + ongoing on ADC groups regular and injected */ + + ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration + if oversampling is already enabled. */ + +} ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'SingleDiff') + * - For all except parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion + * on going on regular group. + * - For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on + * regular and injected groups. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another + * parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available + on device package pins. Refer to device datasheet for channels + availability. */ + + uint32_t Rank; /*!< Specify the rank in the regular group sequencer. + This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS + Note: to disable a channel or change order of conversion sequencer, rank + containing a previous channel setting can be overwritten by the new channel + setting (or parameter number of conversions adjusted) */ + + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, + 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Caution: This parameter applies to a channel that can be used into regular + and/or injected group. It overwrites the last setting. + Note: In case of usage of internal measurement channels (VrefInt, Vbat, ...), + sampling time constraints must be respected (sampling time can be adjusted + in function of ADC clock frequency and sampling time setting). + Refer to device datasheet for timings values. */ + + uint32_t SingleDiff; /*!< Select single-ended or differential input. + In differential mode: Differential measurement is carried out between the + selected channel 'i' (positive input) and channel 'i+1' (negative input). + Only channel 'i' has to be configured, channel 'i+1' is configured automatically + This parameter must be a value of @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING + Caution: This parameter applies to a channel that can be used in a regular + and/or injected group. + It overwrites the last setting. + Note: Refer to Reference Manual to ensure the selected channel is available in + differential mode. + Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is + not usable separately. + Note: This parameter must be modified when ADC is disabled (before ADC start + conversion or after ADC stop conversion). + If ADC is enabled, this parameter setting is bypassed without error + reporting (as it can be the expected behavior in case of another parameter + update on the fly) */ + + uint32_t OffsetNumber; /*!< Select the offset number + This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB + Caution: Only one offset is allowed per channel. This parameter overwrites the + last setting. */ + + uint32_t Offset; /*!< Define the offset to be applied on the raw converted data. + Offset value must be a positive number. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter + must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, + 0x3FF, 0xFF or 0x3F respectively. + Note: This parameter must be modified when no conversion is on going on both + regular and injected groups (ADC disabled, or ADC enabled without + continuous mode or external trigger that could launch a conversion). */ + + uint32_t OffsetSign; /*!< Define if the offset should be subtracted (negative sign) or added (positive + sign) from or to the raw converted data. + This parameter can be a value of @ref ADCEx_OffsetSign. + Note: This parameter must be modified when no conversion is on going on both + regular and injected groups (ADC disabled, or ADC enabled without + continuous mode or external trigger that could launch a conversion).*/ + FunctionalState OffsetSaturation; /*!< Define if the offset should be saturated upon under or over flow. + This parameter value can be ENABLE or DISABLE. + Note: This parameter must be modified when no conversion is on going on both + regular and injected groups (ADC disabled, or ADC enabled without + continuous mode or external trigger that could launch a conversion). */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters except 'HighThreshold', 'LowThreshold': ADC disabled or ADC enabled without conversion + on going on ADC groups regular and injected. + * - For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular and + injected groups. + */ +typedef struct +{ + uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. + For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels + by setting parameter 'WatchdogMode') + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls + of 'HAL_ADC_AnalogWDGConfig()' for each channel) + This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ + + uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. + For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all + channels, ADC groups regular and-or injected. + For Analog Watchdog 2 and 3: Several channels can be monitored by applying + successively the AWD init structure. Channels on ADC + group regular and injected are not differentiated: Set + value 'ADC_ANALOGWATCHDOG_SINGLE_xxx' to monitor 1 + channel, value 'ADC_ANALOGWATCHDOG_ALL_xxx' to monitor + all channels, 'ADC_ANALOGWATCHDOG_NONE' to monitor no + channel. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + + uint32_t Channel; /*!< Select which ADC channel to monitor by analog watchdog. + For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' + is configured on single channel (only 1 channel can be + monitored). + For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, + call successively the function HAL_ADC_AnalogWDGConfig() + for each channel to be added (or removed with value + 'ADC_ANALOGWATCHDOG_NONE'). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */ + + FunctionalState ITMode; /*!< Specify whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HighThreshold; /*!< Configure the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a + number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F + respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC + resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2 + LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ + + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog Low threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a + number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F + respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC + resolution is 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits the 2 + LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits).*/ + + uint32_t FilteringConfig; /*!< Specify whether filtering should be use and the number of samples to consider. + Before setting flag or raising interrupt, analog watchdog can wait to have several + consecutive out-of-window samples. This parameter allows to configure this number. + This parameter only applies to Analog watchdog 1. For others, use value + ADC_AWD_FILTERING_NONE. + This parameter can be a value of @ref ADC_analog_watchdog_filtering_config. */ +} ADC_AnalogWDGConfTypeDef; + +/** + * @brief ADC group injected contexts queue configuration + * @note Structure intended to be used only through structure "ADC_HandleTypeDef" + */ +typedef struct +{ + uint32_t ContextQueue; /*!< Injected channel configuration context: build-up over each + HAL_ADCEx_InjectedConfigChannel() call to finally initialize + JSQR register at HAL_ADCEx_InjectedConfigChannel() last call */ + + uint32_t ChannelCount; /*!< Number of channels in the injected sequence */ +} ADC_InjectionConfigTypeDef; + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy due to an internal process (initialization, + calibration, ...) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is ongoing or can occur + (either by continuous mode, external trigger, low power + auto power-on (if feature available), multimode ADC master + control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR (0x00000400UL) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: End Of Sampling flag + raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< A conversion on ADC group injected is ongoing or can occur + (either by auto-injection mode, external trigger, low + power auto power-on (if feature available), multimode + ADC master control (if feature available)) */ +#define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF (0x00004000UL) /*!< Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 (0x00020000UL) /*!< Out-of-window occurrence of ADC analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 (0x00040000UL) /*!< Out-of-window occurrence of ADC analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000UL) /*!< ADC in multimode slave state, controlled by another ADC + master (when feature available) */ + +/** + * @} + */ + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< ADC initialization parameters and regular + conversions setting */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + ADC_InjectionConfigTypeDef InjectionConfig ; /*!< ADC injected channel configuration build-up + structure */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer + callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected conversion complete + callback */ + void (* InjectedQueueOverflowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected context queue + overflow callback */ + void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 2 callback */ + void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 3 callback */ + void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} ADC_HandleTypeDef; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */ + HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID = 0x05U, /*!< ADC group injected context queue overflow callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID = 0x06U, /*!< ADC analog watchdog 2 callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID = 0x07U, /*!< ADC analog watchdog 3 callback ID */ + HAL_ADC_END_OF_SAMPLING_CB_ID = 0x08U, /*!< ADC end of sampling callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC peripheral internal error (problem of clocking, + enable/disable, erroneous state, ...) */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ +#define HAL_ADC_ERROR_JQOVF (0x08U) /*!< Injected context queue overflow error */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ + +#define ADC_CLOCK_SYNC_PCLK_DIV1 (LL_ADC_CLOCK_SYNC_PCLK_DIV1) /*!< ADC synchronous clock from AHB clock + without prescaler */ +#define ADC_CLOCK_SYNC_PCLK_DIV2 (LL_ADC_CLOCK_SYNC_PCLK_DIV2) /*!< ADC synchronous clock from AHB clock + with prescaler division by 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 (LL_ADC_CLOCK_SYNC_PCLK_DIV4) /*!< ADC synchronous clock from AHB clock + with prescaler division by 4 */ +#define ADC_CLOCK_ASYNC_DIV1 (LL_ADC_CLOCK_ASYNC_DIV1) /*!< ADC asynchronous clock without + prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 (LL_ADC_CLOCK_ASYNC_DIV2) /*!< ADC asynchronous clock with prescaler + division by 2 */ +#define ADC_CLOCK_ASYNC_DIV4 (LL_ADC_CLOCK_ASYNC_DIV4) /*!< ADC asynchronous clock with prescaler + division by 4 */ +#define ADC_CLOCK_ASYNC_DIV6 (LL_ADC_CLOCK_ASYNC_DIV6) /*!< ADC asynchronous clock with prescaler + division by 6 */ +#define ADC_CLOCK_ASYNC_DIV8 (LL_ADC_CLOCK_ASYNC_DIV8) /*!< ADC asynchronous clock with prescaler + division by 8 */ +#define ADC_CLOCK_ASYNC_DIV10 (LL_ADC_CLOCK_ASYNC_DIV10) /*!< ADC asynchronous clock with prescaler + division by 10 */ +#define ADC_CLOCK_ASYNC_DIV12 (LL_ADC_CLOCK_ASYNC_DIV12) /*!< ADC asynchronous clock with prescaler + division by 12 */ +#define ADC_CLOCK_ASYNC_DIV16 (LL_ADC_CLOCK_ASYNC_DIV16) /*!< ADC asynchronous clock with prescaler + division by 16 */ +#define ADC_CLOCK_ASYNC_DIV32 (LL_ADC_CLOCK_ASYNC_DIV32) /*!< ADC asynchronous clock with prescaler + division by 32 */ +#define ADC_CLOCK_ASYNC_DIV64 (LL_ADC_CLOCK_ASYNC_DIV64) /*!< ADC asynchronous clock with prescaler + division by 64 */ +#define ADC_CLOCK_ASYNC_DIV128 (LL_ADC_CLOCK_ASYNC_DIV128) /*!< ADC asynchronous clock with prescaler + division by 128 */ +#define ADC_CLOCK_ASYNC_DIV256 (LL_ADC_CLOCK_ASYNC_DIV256) /*!< ADC asynchronous clock with prescaler + division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define ADC_RESOLUTION_12B (LL_ADC_RESOLUTION_12B) /*!< ADC resolution 12 bits */ +#define ADC_RESOLUTION_10B (LL_ADC_RESOLUTION_10B) /*!< ADC resolution 10 bits */ +#define ADC_RESOLUTION_8B (LL_ADC_RESOLUTION_8B) /*!< ADC resolution 8 bits */ +#define ADC_RESOLUTION_6B (LL_ADC_RESOLUTION_6B) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT) /*!< ADC conversion data alignment: right aligned + (alignment on data register LSB bit 0)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned + (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC sequencer scan mode + * @{ + */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Scan mode disabled */ +#define ADC_SCAN_ENABLE (0x00000001UL) /*!< Scan mode enabled */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_source ADC group regular trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion + trigger software start */ +#define ADC_EXTERNALTRIG_T1_CC1 (LL_ADC_REG_TRIG_EXT_TIM1_CH1) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIG_T1_CC2 (LL_ADC_REG_TRIG_EXT_TIM1_CH2) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 channel 2 event (capture compare). */ +#define ADC_EXTERNALTRIG_T1_CC3 (LL_ADC_REG_TRIG_EXT_TIM1_CH3) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 channel 3 event (capture compare). */ +#define ADC_EXTERNALTRIG_T2_CC2 (LL_ADC_REG_TRIG_EXT_TIM2_CH2) /*!< ADC group regular conversion + trigger from external peripheral: TIM2 channel 2 event (capture compare). */ +#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM3 TRGO event. */ +#define ADC_EXTERNALTRIG_T4_CC4 (LL_ADC_REG_TRIG_EXT_TIM4_CH4) /*!< ADC group regular conversion + trigger from external peripheral: TIM4 channel 4 event (capture compare). */ +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion + trigger from external peripheral: external interrupt line 11 event. */ +#define ADC_EXTERNALTRIG_T12_TRGO (LL_ADC_REG_TRIG_EXT_TIM12_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM12 TRGO event. */ +#define ADC_EXTERNALTRIG_T9_TRGO (LL_ADC_REG_TRIG_EXT_TIM9_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM9 TRGO event. */ +#define ADC_EXTERNALTRIG_T1_TRGO (LL_ADC_REG_TRIG_EXT_TIM1_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 TRGO event. */ +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion + trigger from external peripheral: TIM1 TRGO2 event. */ +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM2 TRGO event. */ +#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM4 TRGO event. */ +#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM6 TRGO event. */ +#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion + trigger from external peripheral: TIM15 TRGO event. */ +#define ADC_EXTERNALTRIG_T3_CC4 (LL_ADC_REG_TRIG_EXT_TIM3_CH4) /*!< ADC group regular conversion + trigger from external peripheral: TIM3 channel 4 event (capture compare). */ +#define ADC_EXTERNALTRIG_LPTIM1_CH1 (LL_ADC_REG_TRIG_EXT_LPTIM1_CH1) /*!< ADC group regular conversion + trigger from external peripheral: LPTIM1 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIG_LPTIM2_CH1 (LL_ADC_REG_TRIG_EXT_LPTIM2_CH1) /*!< ADC group regular conversion + trigger from external peripheral: LPTIM2 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIG_LPTIM3_CH1 (LL_ADC_REG_TRIG_EXT_LPTIM3_CH1) /*!< ADC group regular conversion + trigger from external peripheral: LPTIM3 channel 1 event (capture compare). */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000UL) /*!< ADC group regular trigger + disabled (SW start)*/ +#define ADC_EXTERNALTRIGCONVEDGE_RISING (LL_ADC_REG_TRIG_EXT_RISING) /*!< ADC group regular conversion + trigger polarity set to rising edge */ +#define ADC_EXTERNALTRIGCONVEDGE_FALLING (LL_ADC_REG_TRIG_EXT_FALLING) /*!< ADC group regular conversion + trigger polarity set to falling edge */ +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion + trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_regular_sampling_mode ADC group regular sampling mode + * @{ + */ +#define ADC_SAMPLING_MODE_NORMAL (0x00000000UL) /*!< ADC conversions sampling phase duration is + defined using @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME */ +#define ADC_SAMPLING_MODE_BULB (ADC_CFGR2_BULB) /*!< ADC conversions sampling phase starts + immediately after end of conversion, and stops upon trigger event. + Note: First conversion is using minimal sampling time + (see @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME) */ +#define ADC_SAMPLING_MODE_TRIGGER_CONTROLED (ADC_CFGR2_SMPTRIG) /*!< ADC conversions sampling phase is controlled + by trigger events: + Trigger rising edge = start sampling + Trigger falling edge = stop sampling and start conversion */ +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC sequencer end of unitary conversion or sequence conversions + * @{ + */ +#define ADC_EOC_SINGLE_CONV (ADC_ISR_EOC) /*!< End of unitary conversion flag */ +#define ADC_EOC_SEQ_CONV (ADC_ISR_EOS) /*!< End of sequence conversions flag */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define ADC_OVR_DATA_PRESERVED (LL_ADC_REG_OVR_DATA_PRESERVED) /*!< ADC group regular behavior in case + of overrun: data preserved */ +#define ADC_OVR_DATA_OVERWRITTEN (LL_ADC_REG_OVR_DATA_OVERWRITTEN) /*!< ADC group regular behavior in case + of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +#define ADC_REGULAR_RANK_9 (LL_ADC_REG_RANK_9) /*!< ADC group regular sequencer rank 9 */ +#define ADC_REGULAR_RANK_10 (LL_ADC_REG_RANK_10) /*!< ADC group regular sequencer rank 10 */ +#define ADC_REGULAR_RANK_11 (LL_ADC_REG_RANK_11) /*!< ADC group regular sequencer rank 11 */ +#define ADC_REGULAR_RANK_12 (LL_ADC_REG_RANK_12) /*!< ADC group regular sequencer rank 12 */ +#define ADC_REGULAR_RANK_13 (LL_ADC_REG_RANK_13) /*!< ADC group regular sequencer rank 13 */ +#define ADC_REGULAR_RANK_14 (LL_ADC_REG_RANK_14) /*!< ADC group regular sequencer rank 14 */ +#define ADC_REGULAR_RANK_15 (LL_ADC_REG_RANK_15) /*!< ADC group regular sequencer rank 15 */ +#define ADC_REGULAR_RANK_16 (LL_ADC_REG_RANK_16) /*!< ADC group regular sequencer rank 16 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define ADC_SAMPLETIME_2CYCLES_5 (LL_ADC_SAMPLINGTIME_2CYCLES_5) /*!< Sampling time 2.5 ADC clock cycles */ +#define ADC_SAMPLETIME_6CYCLES_5 (LL_ADC_SAMPLINGTIME_6CYCLES_5) /*!< Sampling time 6.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_24CYCLES_5 (LL_ADC_SAMPLINGTIME_24CYCLES_5) /*!< Sampling time 24.5 ADC clock cycles */ +#define ADC_SAMPLETIME_47CYCLES_5 (LL_ADC_SAMPLINGTIME_47CYCLES_5) /*!< Sampling time 47.5 ADC clock cycles */ +#define ADC_SAMPLETIME_92CYCLES_5 (LL_ADC_SAMPLINGTIME_92CYCLES_5) /*!< Sampling time 92.5 ADC clock cycles */ +#define ADC_SAMPLETIME_247CYCLES_5 (LL_ADC_SAMPLINGTIME_247CYCLES_5) /*!< Sampling time 247.5 ADC clock cycles */ +#define ADC_SAMPLETIME_640CYCLES_5 (LL_ADC_SAMPLINGTIME_640CYCLES_5) /*!< Sampling time 640.5 ADC clock cycles */ +#define ADC_SAMPLETIME_3CYCLES_5 (ADC_SMPR1_SMPPLUS | LL_ADC_SAMPLINGTIME_2CYCLES_5) /*!< Sampling time 3.5 + ADC clock cycles. If selected, this sampling time replaces sampling time + 2.5 ADC clock cycles. These 2 sampling times cannot be used simultaneously. */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +/* Note: VrefInt, TempSensor and Vbat internal channels are not available on */ +/* all ADC instances (refer to Reference Manual). */ +#define ADC_CHANNEL_0 (LL_ADC_CHANNEL_0) /*!< External channel (GPIO pin) ADCx_IN0 */ +#define ADC_CHANNEL_1 (LL_ADC_CHANNEL_1) /*!< External channel (GPIO pin) ADCx_IN1 */ +#define ADC_CHANNEL_2 (LL_ADC_CHANNEL_2) /*!< External channel (GPIO pin) ADCx_IN2 */ +#define ADC_CHANNEL_3 (LL_ADC_CHANNEL_3) /*!< External channel (GPIO pin) ADCx_IN3 */ +#define ADC_CHANNEL_4 (LL_ADC_CHANNEL_4) /*!< External channel (GPIO pin) ADCx_IN4 */ +#define ADC_CHANNEL_5 (LL_ADC_CHANNEL_5) /*!< External channel (GPIO pin) ADCx_IN5 */ +#define ADC_CHANNEL_6 (LL_ADC_CHANNEL_6) /*!< External channel (GPIO pin) ADCx_IN6 */ +#define ADC_CHANNEL_7 (LL_ADC_CHANNEL_7) /*!< External channel (GPIO pin) ADCx_IN7 */ +#define ADC_CHANNEL_8 (LL_ADC_CHANNEL_8) /*!< External channel (GPIO pin) ADCx_IN8 */ +#define ADC_CHANNEL_9 (LL_ADC_CHANNEL_9) /*!< External channel (GPIO pin) ADCx_IN9 */ +#define ADC_CHANNEL_10 (LL_ADC_CHANNEL_10) /*!< External channel (GPIO pin) ADCx_IN10 */ +#define ADC_CHANNEL_11 (LL_ADC_CHANNEL_11) /*!< External channel (GPIO pin) ADCx_IN11 */ +#define ADC_CHANNEL_12 (LL_ADC_CHANNEL_12) /*!< External channel (GPIO pin) ADCx_IN12 */ +#define ADC_CHANNEL_13 (LL_ADC_CHANNEL_13) /*!< External channel (GPIO pin) ADCx_IN13 */ +#define ADC_CHANNEL_14 (LL_ADC_CHANNEL_14) /*!< External channel (GPIO pin) ADCx_IN14 */ +#define ADC_CHANNEL_15 (LL_ADC_CHANNEL_15) /*!< External channel (GPIO pin) ADCx_IN15 */ +#define ADC_CHANNEL_16 (LL_ADC_CHANNEL_16) /*!< External channel (GPIO pin) ADCx_IN16 */ +#define ADC_CHANNEL_17 (LL_ADC_CHANNEL_17) /*!< External channel (GPIO pin) ADCx_IN17 */ +#define ADC_CHANNEL_18 (LL_ADC_CHANNEL_18) /*!< External channel (GPIO pin) ADCx_IN18 */ +#define ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_VREFINT) /*!< Internal channel VrefInt: Internal + voltage reference, channel specific to ADC1. */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< Internal channel Temperature sensor, + channel specific to ADC1. */ +#define ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_VBAT) /*!< Internal channel Vbat/4: Vbat voltage + through a divider ladder of factor 1/4 to have channel voltage always below + Vdda, channel specific to ADC2. */ +#define ADC_CHANNEL_VDDCORE (LL_ADC_CHANNEL_VDDCORE) /*!< Internal channel Vddcore, channel + specific to ADC2. */ +/** + * @} + */ + +/** @defgroup ADC_ConversionDataManagement ADC Conversion Data Management + * @{ + */ +#define ADC_CONVERSIONDATA_DR (0x00000000UL) /*!< Regular Conversion data stored in DR register + only */ +#define ADC_CONVERSIONDATA_DMA_ONESHOT (0x00000000UL) /*!< DMA one shot mode selected. + Note: DMA access is enabled in function HAL_ADC_Start_DMA. */ +#define ADC_CONVERSIONDATA_DMA_CIRCULAR (ADC_CFGR_DMACFG) /*!< DMA circular mode selected. + Note: DMA access is enabled in function HAL_ADC_Start_DMA. */ +#define ADC_CONVERSIONDATA_MDF (ADC_CFGR_ADFCFG) /*!< MDF (ADF) mode selected */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - ADC analog watchdog (AWD) number + * @{ + */ +#define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ +#define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_filtering_config ADC analog watchdog (AWD) filtering configuration + * @{ + */ +#define ADC_AWD_FILTERING_NONE (0x00000000UL) /*!< ADC AWD no filtering, one +out-of-window sample to raise flag or interrupt */ +#define ADC_AWD_FILTERING_2SAMPLES ((ADC_TR1_AWDFILT_0)) /*!< ADC AWD 2 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_3SAMPLES ((ADC_TR1_AWDFILT_1)) /*!< ADC AWD 3 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_4SAMPLES ((ADC_TR1_AWDFILT_1 | ADC_TR1_AWDFILT_0)) /*!< ADC AWD 4 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_5SAMPLES ((ADC_TR1_AWDFILT_2)) /*!< ADC AWD 5 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_6SAMPLES ((ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_0)) /*!< ADC AWD 6 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_7SAMPLES ((ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_1)) /*!< ADC AWD 7 consecutives + out-of-window samples to raise flag or interrupt */ +#define ADC_AWD_FILTERING_8SAMPLES ((ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_1 \ + | ADC_TR1_AWDFILT_0)) /*!< ADC AWD 8 consecutives + out-of-window samples to raise flag or interrupt */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog (AWD) mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE (0x00000000UL) /*!< ADC AWD not selected */ +#define ADC_ANALOGWATCHDOG_SINGLE_REG (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN) /*!< ADC AWD applied to a regular + group single channel */ +#define ADC_ANALOGWATCHDOG_SINGLE_INJEC (ADC_CFGR_AWD1SGL | ADC_CFGR_JAWD1EN) /*!< ADC AWD applied to an + injected group single channel */ +#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC (ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN\ + | ADC_CFGR_JAWD1EN) /*!< ADC AWD applied to a regular + and injected groups single channel */ +#define ADC_ANALOGWATCHDOG_ALL_REG (ADC_CFGR_AWD1EN) /*!< ADC AWD applied to regular + group all channels */ +#define ADC_ANALOGWATCHDOG_ALL_INJEC (ADC_CFGR_JAWD1EN) /*!< ADC AWD applied to injected + group all channels */ +#define ADC_ANALOGWATCHDOG_ALL_REGINJEC (ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN) /*!< ADC AWD applied to regular + and injected groups all channels */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +/** + * @note The oversampling ratio is the number of ADC conversions performed, sum of these conversions data is computed + * to result as the ADC oversampling conversion data (before potential shift) + */ +#define ADC_OVERSAMPLING_RATIO_2 (LL_ADC_OVS_RATIO_2) /*!< ADC oversampling ratio 2 */ +#define ADC_OVERSAMPLING_RATIO_4 (LL_ADC_OVS_RATIO_4) /*!< ADC oversampling ratio 4 */ +#define ADC_OVERSAMPLING_RATIO_8 (LL_ADC_OVS_RATIO_8) /*!< ADC oversampling ratio 8 */ +#define ADC_OVERSAMPLING_RATIO_16 (LL_ADC_OVS_RATIO_16) /*!< ADC oversampling ratio 16 */ +#define ADC_OVERSAMPLING_RATIO_32 (LL_ADC_OVS_RATIO_32) /*!< ADC oversampling ratio 32 */ +#define ADC_OVERSAMPLING_RATIO_64 (LL_ADC_OVS_RATIO_64) /*!< ADC oversampling ratio 64 */ +#define ADC_OVERSAMPLING_RATIO_128 (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio 128 */ +#define ADC_OVERSAMPLING_RATIO_256 (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +/** + * @note The sum of the ADC conversions data is divided by "Rightbitshift" number to result as the ADC oversampling + * conversion data) + */ +#define ADC_RIGHTBITSHIFT_NONE (LL_ADC_OVS_SHIFT_NONE) /*!< ADC oversampling no shift */ +#define ADC_RIGHTBITSHIFT_1 (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling right shift of 1 ranks */ +#define ADC_RIGHTBITSHIFT_2 (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling right shift of 2 ranks */ +#define ADC_RIGHTBITSHIFT_3 (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling right shift of 3 ranks */ +#define ADC_RIGHTBITSHIFT_4 (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling right shift of 4 ranks */ +#define ADC_RIGHTBITSHIFT_5 (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling right shift of 5 ranks */ +#define ADC_RIGHTBITSHIFT_6 (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling right shift of 6 ranks */ +#define ADC_RIGHTBITSHIFT_7 (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling right shift of 7 ranks */ +#define ADC_RIGHTBITSHIFT_8 (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling right shift of 8 ranks */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER (LL_ADC_OVS_REG_CONT) /*!< ADC oversampling discontinuous mode: + continuous mode (all conversions of OVS ratio are done from 1 trigger) */ +#define ADC_TRIGGEREDMODE_MULTI_TRIGGER (LL_ADC_OVS_REG_DISCONT) /*!< ADC oversampling discontinuous mode: + discontinuous mode (each conversion of OVS ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SCOPE_REG Oversampling - Oversampling scope for ADC group regular + * @{ + */ +#define ADC_REGOVERSAMPLING_CONTINUED_MODE (LL_ADC_OVS_GRP_REGULAR_CONTINUED) /*!< Oversampling buffer maintained + during injection sequence */ +#define ADC_REGOVERSAMPLING_RESUMED_MODE (LL_ADC_OVS_GRP_REGULAR_RESUMED) /*!< Oversampling buffer zeroed during + injection sequence */ +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +/** + * @note Analog watchdog 1 is available on all stm32 series + * Analog watchdog 2 and 3 are not available on all series + */ +#define ADC_EOSMP_EVENT (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */ +#define ADC_AWD1_EVENT (ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog) */ +#define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog) */ +#define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog) */ +#define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +#define ADC_JQOVF_EVENT (ADC_FLAG_JQOVF) /*!< ADC Injected Context Queue Overflow event */ +/** + * @} + */ +#define ADC_AWD_EVENT ADC_AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility + with other STM32 devices having only one analog watchdog */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of sampling interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_JEOC ADC_IER_JEOCIE /*!< ADC End of injected conversion interrupt source */ +#define ADC_IT_JEOS ADC_IER_JEOSIE /*!< ADC End of injected sequence of conversions interrupt source */ +#define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ +#define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog + watchdog) */ +#define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog + watchdog) */ +#define ADC_IT_JQOVF ADC_IER_JQOVFIE /*!< ADC Injected Context Queue Overflow interrupt source */ + +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_JEOC ADC_ISR_JEOC /*!< ADC End of Injected Conversion flag */ +#define ADC_FLAG_JEOS ADC_ISR_JEOS /*!< ADC End of Injected sequence of Conversions flag */ +#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag (main analog watchdog) */ +#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag (additional analog watchdog) */ +#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag (additional analog watchdog) */ +#define ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC Injected Context Queue Overflow flag */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Verify the ADC data conversion setting. + * @param DATA : programmed DATA conversion mode. + * @retval SET (DATA is a valid value) or RESET (DATA is invalid) + */ +#define IS_ADC_CONVERSIONDATAMGT(DATA) \ + ((((DATA) == ADC_CONVERSIONDATA_DR)) || \ + (((DATA) == ADC_CONVERSIONDATA_MDF)) || \ + (((DATA) == ADC_CONVERSIONDATA_DMA_ONESHOT)) || \ + (((DATA) == ADC_CONVERSIONDATA_DMA_CIRCULAR))) + +/** + * @brief Return resolution bits in CFGR register RES[1:0] field. + * @param __HANDLE__ ADC handle + * @retval Value of bitfield RES in CFGR register. + */ +#define ADC_GET_RESOLUTION(__HANDLE__) \ + (LL_ADC_GetResolution((__HANDLE__)->Instance)) + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Verify that a given value is aligned with the ADC resolution range. + * @param __RESOLUTION__ ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_VALUE__ value checked against the resolution. + * @retval SET (__ADC_VALUE__ in line with __RESOLUTION__) or RESET (__ADC_VALUE__ not in line with __RESOLUTION__) + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \ + ((__ADC_VALUE__) <= __LL_ADC_DIGITAL_SCALE(__RESOLUTION__)) + +/** + * @brief Verify the length of the scheduled regular conversions group. + * @param __LENGTH__ number of programmed conversions. + * @retval SET (__LENGTH__ is within the maximum number of possible programmable regular conversions) + * or RESET (__LENGTH__ is null or too large) + */ +#define IS_ADC_REGULAR_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (16UL))) + + +/** + * @brief Verify the number of scheduled regular conversions in discontinuous mode. + * @param NUMBER number of scheduled regular conversions in discontinuous mode. + * @retval SET (NUMBER is within the maximum number of regular conversions in discontinuous mode) + * or RESET (NUMBER is null or too large) + */ +#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= (1UL)) && ((NUMBER) <= (8UL))) + + +/** + * @brief Verify the ADC clock setting. + * @param __ADC_CLOCK__ programmed ADC clock. + * @retval SET (__ADC_CLOCK__ is a valid value) or RESET (__ADC_CLOCK__ is invalid) + */ +#define IS_ADC_CLOCKPRESCALER(__ADC_CLOCK__) (((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV1) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV2) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV4) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV1) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV2) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV4) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV6) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV8) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV10) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV12) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV16) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV32) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV64) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV128) || \ + ((__ADC_CLOCK__) == ADC_CLOCK_ASYNC_DIV256) ) + +/** + * @brief Verify the ADC resolution setting. + * @param __RESOLUTION__ programmed ADC resolution. + * @retval SET (__RESOLUTION__ is a valid value) or RESET (__RESOLUTION__ is invalid) + */ +#define IS_ADC_RESOLUTION(__RESOLUTION__) (((__RESOLUTION__) == ADC_RESOLUTION_12B) || \ + ((__RESOLUTION__) == ADC_RESOLUTION_10B) || \ + ((__RESOLUTION__) == ADC_RESOLUTION_8B) || \ + ((__RESOLUTION__) == ADC_RESOLUTION_6B) ) + +/** + * @brief Verify the ADC resolution setting when limited to 6 or 8 bits. + * @param __RESOLUTION__ programmed ADC resolution when limited to 6 or 8 bits. + * @retval SET (__RESOLUTION__ is a valid value) or RESET (__RESOLUTION__ is invalid) + */ +#define IS_ADC_RESOLUTION_8_6_BITS(__RESOLUTION__) (((__RESOLUTION__) == ADC_RESOLUTION_8B) || \ + ((__RESOLUTION__) == ADC_RESOLUTION_6B) ) + +/** + * @brief Verify the ADC converted data alignment. + * @param __ALIGN__ programmed ADC converted data alignment. + * @retval SET (__ALIGN__ is a valid value) or RESET (__ALIGN__ is invalid) + */ +#define IS_ADC_DATA_ALIGN(__ALIGN__) (((__ALIGN__) == ADC_DATAALIGN_RIGHT) || \ + ((__ALIGN__) == ADC_DATAALIGN_LEFT) ) + +/** + * @brief Verify the ADC scan mode. + * @param __SCAN_MODE__ programmed ADC scan mode. + * @retval SET (__SCAN_MODE__ is valid) or RESET (__SCAN_MODE__ is invalid) + */ +#define IS_ADC_SCAN_MODE(__SCAN_MODE__) (((__SCAN_MODE__) == ADC_SCAN_DISABLE) || \ + ((__SCAN_MODE__) == ADC_SCAN_ENABLE) ) + +/** + * @brief Verify the ADC edge trigger setting for regular group. + * @param __EDGE__ programmed ADC edge trigger setting. + * @retval SET (__EDGE__ is a valid value) or RESET (__EDGE__ is invalid) + */ +#define IS_ADC_EXTTRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +/** + * @brief Verify the ADC regular conversions external trigger. + * @param __REGTRIG__ programmed ADC regular conversions external trigger. + * @retval SET (__REGTRIG__ is a valid value) or RESET (__REGTRIG__ is invalid) + */ +#define IS_ADC_EXTTRIG(__REGTRIG__) (((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC1) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC2) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC3) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_CC2) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T4_CC4) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T12_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T9_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T4_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T6_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T15_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T3_CC4) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_LPTIM1_CH1) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_LPTIM2_CH1) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_LPTIM3_CH1) || \ + ((__REGTRIG__) == ADC_SOFTWARE_START) ) + +/** + * @brief Verify the ADC regular conversions external trigger. + * @param __SAMPLINGMODE__ programmed ADC regular conversions external trigger. + * @retval SET (__SAMPLINGMODE__ is a valid value) or RESET (__SAMPLINGMODE__ is invalid) + */ +#define IS_ADC_SAMPLINGMODE(__SAMPLINGMODE__) (((__SAMPLINGMODE__) == ADC_SAMPLING_MODE_NORMAL) || \ + ((__SAMPLINGMODE__) == ADC_SAMPLING_MODE_BULB) || \ + ((__SAMPLINGMODE__) == ADC_SAMPLING_MODE_TRIGGER_CONTROLED) ) + +/** + * @brief Verify the ADC regular conversions check for converted data availability. + * @param __EOC_SELECTION__ converted data availability check. + * @retval SET (__EOC_SELECTION__ is a valid value) or RESET (__EOC_SELECTION__ is invalid) + */ +#define IS_ADC_EOC_SELECTION(__EOC_SELECTION__) (((__EOC_SELECTION__) == ADC_EOC_SINGLE_CONV) || \ + ((__EOC_SELECTION__) == ADC_EOC_SEQ_CONV) ) + +/** + * @brief Verify the ADC regular conversions overrun handling. + * @param __OVR__ ADC regular conversions overrun handling. + * @retval SET (__OVR__ is a valid value) or RESET (__OVR__ is invalid) + */ +#define IS_ADC_OVERRUN(__OVR__) (((__OVR__) == ADC_OVR_DATA_PRESERVED) || \ + ((__OVR__) == ADC_OVR_DATA_OVERWRITTEN) ) + +/** + * @brief Verify the ADC conversions sampling time. + * @param __TIME__ ADC conversions sampling time. + * @retval SET (__TIME__ is a valid value) or RESET (__TIME__ is invalid) + */ +#define IS_ADC_SAMPLE_TIME(__TIME__) (((__TIME__) == ADC_SAMPLETIME_2CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_6CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_24CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_47CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_92CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_247CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_640CYCLES_5) ) + +/** + * @brief Verify the ADC regular channel setting. + * @param __CHANNEL__ programmed ADC regular channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_REGULAR_RANK(__CHANNEL__) (((__CHANNEL__) == ADC_REGULAR_RANK_1 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_2 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_3 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_4 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_5 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_6 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_7 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_8 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_9 ) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_10) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_11) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_12) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_13) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_14) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_15) || \ + ((__CHANNEL__) == ADC_REGULAR_RANK_16) ) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Fixed timeout values for ADC conversion (including sampling time) */ +/* Maximum sampling time is 640.5 ADC clock cycle (SMPx[2:0] = 0b111 */ +/* Maximum conversion time is 12.5 + Maximum sampling time */ +/* or 12.5 + 640.5 = 653 ADC clock cycles */ +/* Minimum ADC Clock frequency is 0.14 MHz */ +/* Maximum conversion time is */ +/* 653 / 0.14 MHz = 4.66 ms */ +#define ADC_STOP_CONVERSION_TIMEOUT ( 5UL) /*!< ADC stop time-out value */ + +/* Delay for temperature sensor stabilization time. */ +/* Maximum delay is 120us (refer device datasheet, parameter tSTART). */ +/* Unit: us */ +#define ADC_TEMPSENSOR_DELAY_US (LL_ADC_DELAY_TEMPSENSOR_STAB_US) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source + * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source + * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source + * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag + * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag. + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag + * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag. + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals ADC_CHANNEL_x. + * @note Example: + * __HAL_ADC_CHANNEL_TO_DECIMAL_NB(ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 (3) + * @arg @ref ADC_CHANNEL_1 (3) + * @arg @ref ADC_CHANNEL_2 (3) + * @arg @ref ADC_CHANNEL_3 (3) + * @arg @ref ADC_CHANNEL_4 (3) + * @arg @ref ADC_CHANNEL_5 (3) + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (1) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC3.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + +/** + * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __HAL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 (3) + * @arg @ref ADC_CHANNEL_1 (3) + * @arg @ref ADC_CHANNEL_2 (3) + * @arg @ref ADC_CHANNEL_3 (3) + * @arg @ref ADC_CHANNEL_4 (3) + * @arg @ref ADC_CHANNEL_5 (3) + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (1) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (1, 3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * ADC_CHANNEL_1, ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 (3) + * @arg @ref ADC_CHANNEL_1 (3) + * @arg @ref ADC_CHANNEL_2 (3) + * @arg @ref ADC_CHANNEL_3 (3) + * @arg @ref ADC_CHANNEL_4 (3) + * @arg @ref ADC_CHANNEL_5 (3) + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (1) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC3.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel + * connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (ADC_CHANNEL_1, ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 (3) + * @arg @ref ADC_CHANNEL_1 (3) + * @arg @ref ADC_CHANNEL_2 (3) + * @arg @ref ADC_CHANNEL_3 (3) + * @arg @ref ADC_CHANNEL_4 (3) + * @arg @ref ADC_CHANNEL_5 (3) + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_VREFINT (1) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC3.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + */ +#define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT (1) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1. + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Helper macro to get the ADC multimode conversion data of ADC master + * or ADC slave from raw value with both ADC conversion data concatenated. + * @note This macro is intended to be used when multimode transfer by DMA + * is enabled: refer to function @ref LL_ADC_SetMultiDMATransfer(). + * In this case the transferred data need to processed with this macro + * to separate the conversion data of ADC master and ADC slave. + * @param __ADC_MULTI_MASTER_SLAVE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_MASTER + * @arg @ref LL_ADC_MULTI_SLAVE + * @param __ADC_MULTI_CONV_DATA__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __HAL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(__ADC_MULTI_MASTER_SLAVE__, __ADC_MULTI_CONV_DATA__) \ + __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE((__ADC_MULTI_MASTER_SLAVE__), (__ADC_MULTI_CONV_DATA__)) +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ + __LL_ADC_COMMON_INSTANCE((__ADCx__)) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value + */ +#define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ + (__ADC_RESOLUTION_CURRENT__),\ + (__ADC_RESOLUTION_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value) + * in differential ended mode. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DIFF_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DIFF_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value + (unit: uV/DegCelsius). + * On this STM32 series, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at + temperature and Vref+ defined in parameters below) (unit: mV). + * On this STM32 series, refer to device datasheet parameter "V30" + * (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see + parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ + (__TEMPSENSOR_TYP_CALX_V__),\ + (__TEMPSENSOR_CALX_TEMP__),\ + (__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extended module */ +#include "stm32h7rsxx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc); + +/* ADC sampling control */ +HAL_StatusTypeDef HAL_ADC_StartSampling(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_StopSampling(ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, + const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup ADC_Private_Functions ADC Private Functions + * @{ + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t ConversionGroup); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAError(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_ADC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc_ex.h new file mode 100644 index 000000000..9daa3c163 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_adc_ex.h @@ -0,0 +1,1152 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_ADC_EX_H +#define STM32H7RSxx_HAL_ADC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @brief ADC Injected Conversion Oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ +} ADC_InjOversamplingTypeDef; + +/** + * @brief Structure definition of ADC group injected and ADC channel affected to ADC group injected + * @note Parameters of this structure are shared within 2 scopes: + * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, + * InjectedOffsetNumber, InjectedOffset, InjectedOffsetSign, InjectedOffsetSaturation + * - Scope ADC group injected (affects all channels of injected group): InjectedNbrOfConversion, + * InjectedDiscontinuousConvMode, + * AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConv, ExternalTrigInjecConvEdge, + * InjecOversamplingMode, InjecOversampling. + * @note The setting of these parameters by function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter + * 'InjectedSingleDiff') + * - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext', 'InjecOversampling': ADC enabled + * without conversion on going on injected group. + * - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'InjectedOffsetSign', + * 'InjectedOffsetSaturation', 'AutoInjectedConv': ADC enabled without conversion on going on regular and + * injected groups. + * - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', + * 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going + * on ADC groups regular and injected. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another + * parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t InjectedChannel; /*!< Specifies the channel to configure into ADC group injected. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be + available on device package pins. Refer to device datasheet for + channels availability. */ + + uint32_t InjectedRank; /*!< Specifies the rank in the ADC group injected sequencer. + This parameter must be a value of @ref ADC_INJ_SEQ_RANKS. + Note: to disable a channel or change order of conversion sequencer, + rank containing a previous channel setting can be overwritten by + the new channel setting (or parameter number of conversions + adjusted) */ + + uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles. + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, + 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME. + Caution: This parameter applies to a channel that can be used in a + regular and/or injected group. It overwrites the last setting. + Note: In case of usage of internal measurement channels (VrefInt, ...), + sampling time constraints must be respected (sampling time can be + adjusted in function of ADC clock frequency and sampling time + setting). Refer to device datasheet for timings values. */ + + uint32_t InjectedSingleDiff; /*!< Selection of single-ended or differential input. + In differential mode: Differential measurement is between the selected + channel 'i' (positive input) and channel 'i+1' (negative input). + Only channel 'i' has to be configured, channel 'i+1' is configured + automatically. + This parameter must be a value of + @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING. + Caution: This parameter applies to a channel that can be used in a + regular and/or injected group. It overwrites the last setting. + Note: Refer to Reference Manual to ensure the selected channel is + available in differential mode. + Note: When configuring a channel 'i' in differential mode, the channel + 'i+1' is not usable separately. + Note: This parameter must be modified when ADC is disabled (before ADC + start conversion or after ADC stop conversion). + If ADC is enabled, this parameter setting is bypassed without error + reporting (as it can be the expected behavior in case of another + parameter update on the fly) */ + + uint32_t InjectedOffsetNumber; /*!< Selects the offset number. + This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB. + Caution: Only one offset is allowed per channel. This parameter + overwrites the last setting. */ + + uint32_t InjectedOffset; /*!< Defines the offset to be applied on the raw converted data. + Offset value must be a positive number. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this + parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, + 0x3FF, 0xFF or 0x3F respectively. + Note: This parameter must be modified when no conversion is on going + on both regular and injected groups (ADC disabled, or ADC enabled + without continuous mode or external trigger that could launch a + conversion). */ + + uint32_t InjectedOffsetSign; /*!< Define if the offset should be subtracted (negative sign) or added + (positive sign) from or to the raw converted data. + This parameter can be a value of @ref ADCEx_OffsetSign. + Note: This parameter must be modified when no conversion is on going + on both regular and injected groups (ADC disabled, or ADC + enabled without continuous mode or external trigger that could + launch a conversion). */ + FunctionalState InjectedOffsetSaturation; /*!< Define if the offset should be saturated upon under or over flow. + This parameter value can be ENABLE or DISABLE. + Note: This parameter must be modified when no conversion is on going + on both regular and injected groups (ADC disabled, or ADC enabled + without continuous mode or external trigger that could launch a + conversion). */ + + uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the ADC group + injected sequencer. + To use the injected group sequencer and convert several ranks, parameter + 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 4. + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to configure a channel on + injected group can impact the configuration of other channels previously + set. */ + + FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of ADC group injected + is performed in Complete-sequence/Discontinuous-sequence + (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter + 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter must be modified when ADC is disabled (before ADC + start conversion or after ADC stop conversion). + Note: For injected group, discontinuous mode converts the sequence + channel by channel (discontinuous length fixed to 1 rank). + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the + configuration of other channels previously set. */ + + FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC group injected automatic conversion + after regular one + This parameter can be set to ENABLE or DISABLE. + Note: To use Automatic injected conversion, discontinuous mode must + be disabled ('DiscontinuousConvMode' and + 'InjectedDiscontinuousConvMode' set to DISABLE) + Note: To use Automatic injected conversion, injected group external + triggers must be disabled ('ExternalTrigInjecConv' set to + ADC_INJECTED_SOFTWARE_START) + Note: In case of DMA used with regular group: if DMA configured in + normal mode (single shot) JAUTO will be stopped upon DMA transfer + complete. + To maintain JAUTO always enabled, DMA must be configured in + circular mode. + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to configure a channel + on injected group can impact the configuration of other channels + previously set. */ + + FunctionalState QueueInjectedContext; /*!< Specifies whether the context queue feature is enabled. + This parameter can be set to ENABLE or DISABLE. + If context queue is enabled, injected sequencer&channels configurations + are queued on up to 2 contexts. If a + new injected context is set when queue is full, error is triggered by + interruption and through function + 'HAL_ADCEx_InjectedQueueOverflowCallback'. + Caution: This feature request that the sequence is fully configured + before injected conversion start. + Therefore, configure channels with as many calls to + HAL_ADCEx_InjectedConfigChannel() as the + 'InjectedNbrOfConversion' parameter. + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the + configuration of other channels previously set. + Note: This parameter must be modified when ADC is disabled (before ADC + start conversion or after ADC stop conversion). */ + + uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of + injected group. + If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled + and software trigger is used instead. + This parameter can be a value of + @ref ADC_injected_external_trigger_source. + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to configure a channel + on injected group can impact the configuration of other channels + previously set. */ + + uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. + This parameter can be a value of @ref ADC_injected_external_trigger_edge. + If trigger source is set to ADC_INJECTED_SOFTWARE_START, this parameter + is discarded. + Caution: this setting impacts the entire injected group. Therefore, + call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the + configuration of other channels previously set. */ + + FunctionalState InjecOversamplingMode; /*!< Specifies whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no + conversion is ongoing (both ADSTART and JADSTART cleared). */ + + ADC_InjOversamplingTypeDef InjecOversampling; /*!< Specifies the Oversampling parameters. + Caution: this setting overwrites the previous oversampling + configuration if oversampling already enabled. + Note: This parameter can be modified only if there is no + conversion is ongoing (both ADSTART and JADSTART cleared).*/ +} ADC_InjectionConfTypeDef; + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Structure definition of ADC multimode + * @note The setting of these parameters by function HAL_ADCEx_MultiModeConfigChannel() is conditioned by ADCs state + * (both Master and Slave ADCs). + * Both Master and Slave ADCs must be disabled. + */ +typedef struct +{ + uint32_t Mode; /*!< Configures the ADC to operate in independent or multimode. + This parameter can be a value of @ref ADC_HAL_EC_MULTI_MODE. */ + + uint32_t DMAAccessMode; /*!< Configures the DMA mode for multimode ADC: + selection whether 2 DMA channels (each ADC uses its own DMA channel) or 1 DMA channel + (one DMA channel for both ADC, DMA of ADC master). + This parameter can be a value of @ref ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION. */ + + uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. + This parameter can be a value of @ref ADC_HAL_EC_MULTI_TWOSMP_DELAY. + Delay range depends on selected resolution: + from 1 to 12 clock cycles for 12 bits, from 1 to 10 clock cycles for 10 bits, + from 1 to 8 clock cycles for 8 bits, from 1 to 6 clock cycles for 6 bits. */ +} ADC_MultiModeTypeDef; +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_injected_external_trigger_source ADC group injected trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_INJECTED_SOFTWARE_START (LL_ADC_INJ_TRIG_SOFTWARE) /*!< ADC group injected conversion + trigger software start */ +#define ADC_EXTERNALTRIGINJEC_T1_TRGO (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM1 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T1_CC4 (LL_ADC_INJ_TRIG_EXT_TIM1_CH4) /*!< ADC group injected conversion + trigger from external peripheral: TIM1 channel 4 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T2_TRGO (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM2 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T2_CC1 (LL_ADC_INJ_TRIG_EXT_TIM2_CH1) /*!< ADC group injected conversion + trigger from external peripheral: TIM2 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T3_CC4 (LL_ADC_INJ_TRIG_EXT_TIM3_CH4) /*!< ADC group injected conversion + trigger from external peripheral: TIM3 channel 4 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T4_TRGO (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM4 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_EXT_IT15 (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) /*!< ADC group injected conversion + trigger from external peripheral: external interrupt line 15. */ +#define ADC_EXTERNALTRIGINJEC_T9_CC1 (LL_ADC_INJ_TRIG_EXT_TIM9_CH1) /*!< ADC group injected conversion + trigger from external peripheral: TIM9 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T1_TRGO2 (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2) /*!< ADC group injected conversion + trigger from external peripheral: TIM1 TRGO2 event. */ +#define ADC_EXTERNALTRIGINJEC_T12_TRGO (LL_ADC_INJ_TRIG_EXT_TIM12_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM12 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T9_TRGO (LL_ADC_INJ_TRIG_EXT_TIM9_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM9 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T3_CC3 (LL_ADC_INJ_TRIG_EXT_TIM3_CH3) /*!< ADC group injected conversion + trigger from external peripheral: TIM3 channel 3 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T3_TRGO (LL_ADC_INJ_TRIG_EXT_TIM3_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM3 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T3_CC1 (LL_ADC_INJ_TRIG_EXT_TIM3_CH1) /*!< ADC group injected conversion + trigger from external peripheral: TIM3 channel 1 event (capture compare). */ +#define ADC_EXTERNALTRIGINJEC_T6_TRGO (LL_ADC_INJ_TRIG_EXT_TIM6_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM6 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_T15_TRGO (LL_ADC_INJ_TRIG_EXT_TIM15_TRGO) /*!< ADC group injected conversion + trigger from external peripheral: TIM15 TRGO event. */ +#define ADC_EXTERNALTRIGINJEC_LPTIM1_CH2 (LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2) /*!< ADC group injected conversion + trigger from external peripheral: LPTIM1 channel 2 event (capture compare).*/ +#define ADC_EXTERNALTRIGINJEC_LPTIM2_CH2 (LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2) /*!< ADC group injected conversion + trigger from external peripheral: LPTIM2 channel 2 event (capture compare).*/ +#define ADC_EXTERNALTRIGINJEC_LPTIM3_CH1 (LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1) /*!< ADC group injected conversion + trigger from external peripheral: LPTIM3 channel 1 event (capture compare).*/ +/** + * @} + */ + +/** @defgroup ADC_injected_external_trigger_edge ADC group injected trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE (0x00000000UL) /*!< Injected conversions trigger + disabled (SW start)*/ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING (ADC_JSQR_JEXTEN_0) /*!< Injected conversions trigger + polarity set to rising edge */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING (ADC_JSQR_JEXTEN_1) /*!< Injected conversions trigger + polarity set to falling edge */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING (ADC_JSQR_JEXTEN) /*!< Injected conversions trigger + polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending + * @{ + */ +#define ADC_SINGLE_ENDED (LL_ADC_SINGLE_ENDED) /*!< ADC channel ending set to single ended */ +#define ADC_DIFFERENTIAL_ENDED (LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to differential */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OFFSET_NB ADC instance - Offset number + * @{ + */ +#define ADC_OFFSET_NONE (ADC_OFFSET_4 + 1U) /*!< ADC offset disabled: no offset correction for the selected + ADC channel */ +#define ADC_OFFSET_1 (LL_ADC_OFFSET_1) /*!< ADC offset number 1: ADC channel and offset level to which + the offset programmed will be applied (independently of channel mapped + on ADC group regular or group injected) */ +#define ADC_OFFSET_2 (LL_ADC_OFFSET_2) /*!< ADC offset number 2: ADC channel and offset level to which + the offset programmed will be applied (independently of channel mapped + on ADC group regular or group injected) */ +#define ADC_OFFSET_3 (LL_ADC_OFFSET_3) /*!< ADC offset number 3: ADC channel and offset level to which + the offset programmed will be applied (independently of channel mapped + on ADC group regular or group injected) */ +#define ADC_OFFSET_4 (LL_ADC_OFFSET_4) /*!< ADC offset number 4: ADC channel and offset level to which + the offset programmed will be applied (independently of channel mapped + on ADC group regular or group injected) */ +/** + * @} + */ + +/** @defgroup ADCEx_OffsetSign ADC Extended Offset Sign + * @{ + */ +#define ADC_OFFSET_SIGN_NEGATIVE (0x00000000UL) /*!< Offset sign negative, offset is subtracted */ +#define ADC_OFFSET_SIGN_POSITIVE (ADC_OFR1_OFFSETPOS) /*!< Offset sign positive, offset is added */ +/** + * @} + */ + +/** @defgroup ADC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks + * @{ + */ +#define ADC_INJECTED_RANK_1 (LL_ADC_INJ_RANK_1) /*!< ADC group injected sequencer rank 1 */ +#define ADC_INJECTED_RANK_2 (LL_ADC_INJ_RANK_2) /*!< ADC group injected sequencer rank 2 */ +#define ADC_INJECTED_RANK_3 (LL_ADC_INJ_RANK_3) /*!< ADC group injected sequencer rank 3 */ +#define ADC_INJECTED_RANK_4 (LL_ADC_INJ_RANK_4) /*!< ADC group injected sequencer rank 4 */ +/** + * @} + */ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADC_HAL_EC_MULTI_MODE Multimode - Mode + * @{ + */ +#define ADC_MODE_INDEPENDENT (LL_ADC_MULTI_INDEPENDENT) /*!< ADC dual mode disabled + (ADC independent mode) */ +#define ADC_DUALMODE_REGSIMULT (LL_ADC_MULTI_DUAL_REG_SIMULT) /*!< ADC dual mode enabled: group regular + simultaneous */ +#define ADC_DUALMODE_INTERL (LL_ADC_MULTI_DUAL_REG_INTERL) /*!< ADC dual mode enabled: Combined + group regular interleaved */ +#define ADC_DUALMODE_INJECSIMULT (LL_ADC_MULTI_DUAL_INJ_SIMULT) /*!< ADC dual mode enabled: group + injected simultaneous */ +#define ADC_DUALMODE_ALTERTRIG (LL_ADC_MULTI_DUAL_INJ_ALTERN) /*!< ADC dual mode enabled: group + injected alternate trigger. Works only with external triggers (not internal + SW start) */ +#define ADC_DUALMODE_REGSIMULT_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) /*!< ADC dual mode enabled: Combined + group regular simultaneous + group injected simultaneous */ +#define ADC_DUALMODE_REGSIMULT_ALTERTRIG (LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) /*!< ADC dual mode enabled: Combined + group regular simultaneous + group injected alternate trigger */ +#define ADC_DUALMODE_REGINTERL_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) /*!< ADC dual mode enabled: Combined + group regular interleaved + group injected simultaneous */ + +/** @defgroup ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION Multimode - DMA transfer mode depending on ADC resolution + * @{ + */ +#define ADC_DMAACCESSMODE_DISABLED (0x00000000UL) /*!< DMA multimode disabled: each ADC uses its own + DMA channel */ +#define ADC_DMAACCESSMODE_12_10_BITS (ADC_CCR_MDMA_1) /*!< DMA multimode enabled (one DMA channel for both ADC, + DMA of ADC master) for 12 and 10 bits resolution */ +#define ADC_DMAACCESSMODE_8_6_BITS (ADC_CCR_MDMA) /*!< DMA multimode enabled (one DMA channel for both ADC, + DMA of ADC master) for 8 and 6 bits resolution */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_MULTI_TWOSMP_DELAY Multimode - Delay between two sampling phases + * @{ + */ +#define ADC_TWOSAMPLINGDELAY_1CYCLE (LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE) /*!< ADC multimode delay between two + sampling phases: 1 ADC clock cycle */ +#define ADC_TWOSAMPLINGDELAY_2CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES) /*!< ADC multimode delay between two + sampling phases: 2 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_3CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES) /*!< ADC multimode delay between two + sampling phases: 3 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_4CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES) /*!< ADC multimode delay between two + sampling phases: 4 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_5CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) /*!< ADC multimode delay between two + sampling phases: 5 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_6CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) /*!< ADC multimode delay between two + sampling phases: 6 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_7CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) /*!< ADC multimode delay between two + sampling phases: 7 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_8CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) /*!< ADC multimode delay between two + sampling phases: 8 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_9CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) /*!< ADC multimode delay between two + sampling phases: 9 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_10CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) /*!< ADC multimode delay between two + sampling phases: 10 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_11CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) /*!< ADC multimode delay between two + sampling phases: 11 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_12CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) /*!< ADC multimode delay between two + sampling phases: 12 ADC clock cycles */ +/** + * @} + */ + +/** + * @} + */ +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on + all STM32 devices) */ +#define ADC_INJECTED_GROUP (LL_ADC_GROUP_INJECTED) /*!< ADC group injected (not available on + all STM32 devices) */ +#define ADC_REGULAR_INJECTED_GROUP (LL_ADC_GROUP_REGULAR_INJECTED) /*!< ADC both groups regular and injected */ +/** + * @} + */ + +/** @defgroup ADC_CFGR_fields ADCx CFGR fields + * @{ + */ +#define ADC_CFGR_FIELDS (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN |\ + ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM |\ + ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN |\ + ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ + ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN |\ + ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN ) +/** + * @} + */ + +/** @defgroup ADC_SMPR1_fields ADCx SMPR1 fields + * @{ + */ +#define ADC_SMPR1_FIELDS (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 |\ + ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 |\ + ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1 |\ + ADC_SMPR1_SMP0) +/** + * @} + */ + +/** @defgroup ADC_CFGR_fields_2 ADCx CFGR sub fields + * @{ + */ +/* ADC_CFGR fields of parameters that can be updated when no conversion + (neither regular nor injected) is on-going */ +#define ADC_CFGR_FIELDS_2 ((ADC_CFGR_DMACFG | ADC_CFGR_ADFCFG | ADC_CFGR_AUTDLY)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADCEx_Exported_Macro ADC Extended Exported Macros + * @{ + */ + +/** @brief Force ADC instance in multimode mode independent (multimode disable). + * @note This macro must be used only in case of transition from multimode + * to mode independent and in case of unknown previous state, + * to ensure ADC configuration is in mode independent. + * @note Standard way of multimode configuration change is done from + * HAL ADC handle of ADC master using function + * "HAL_ADCEx_MultiModeConfigChannel(..., ADC_MODE_INDEPENDENT)" )". + * Usage of this macro is not the Standard way of multimode + * configuration and can lead to have HAL ADC handles status + * misaligned. Usage of this macro must be limited to cases + * mentioned above. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#define ADC_FORCE_MODE_INDEPENDENT(__HANDLE__) \ + LL_ADC_SetMultimode(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance), LL_ADC_MULTI_INDEPENDENT) + +/** + * @} + */ +#endif /* ADC_MULTIMODE_SUPPORT */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of injected group is software start + * or external trigger. + * @param __HANDLE__ ADC handle. + * @retval SET (software start) or RESET (external trigger). + */ +#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ + (((__HANDLE__)->Instance->JSQR & ADC_JSQR_JEXTEN) == 0UL) + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#define ADC_IS_INDEPENDENT(__HANDLE__) (RESET) + +/** + * @brief Set the selected injected Channel rank. + * @param __CHANNELNB__ Channel number. + * @param __RANKNB__ Rank number. + * @retval None + */ +#define ADC_JSQR_RK(__CHANNELNB__, __RANKNB__) \ + ((((__CHANNELNB__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) \ + << ((__RANKNB__) & ADC_INJ_RANK_ID_JSQR_MASK)) + +/** + * @brief Configure ADC injected context queue + * @param __INJECT_CONTEXT_QUEUE_MODE__ Injected context queue mode. + * @retval None + */ +#define ADC_CFGR_INJECT_CONTEXT_QUEUE(__INJECT_CONTEXT_QUEUE_MODE__) \ + ((__INJECT_CONTEXT_QUEUE_MODE__) << ADC_CFGR_JQM_Pos) + +/** + * @brief Configure ADC discontinuous conversion mode for injected group + * @param __INJECT_DISCONTINUOUS_MODE__ Injected discontinuous mode. + * @retval None + */ +#define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) \ + ((__INJECT_DISCONTINUOUS_MODE__) << ADC_CFGR_JDISCEN_Pos) + +/** + * @brief Configure ADC discontinuous conversion mode for regular group + * @param __REG_DISCONTINUOUS_MODE__ Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR_REG_DISCONTINUOUS(__REG_DISCONTINUOUS_MODE__) \ + ((__REG_DISCONTINUOUS_MODE__) << ADC_CFGR_DISCEN_Pos) + +/** + * @brief Configure the number of discontinuous conversions for regular group. + * @param __NBR_DISCONTINUOUS_CONV__ Number of discontinuous conversions. + * @retval None + */ +#define ADC_CFGR_DISCONTINUOUS_NUM(__NBR_DISCONTINUOUS_CONV__) \ + (((__NBR_DISCONTINUOUS_CONV__) - 1UL) << ADC_CFGR_DISCNUM_Pos) + +/** + * @brief Configure the ADC auto delay mode. + * @param __AUTOWAIT__ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR_AUTOWAIT(__AUTOWAIT__) ((__AUTOWAIT__) << ADC_CFGR_AUTDLY_Pos) + +/** + * @brief Configure ADC continuous conversion mode. + * @param __CONTINUOUS_MODE__ Continuous mode. + * @retval None + */ +#define ADC_CFGR_CONTINUOUS(__CONTINUOUS_MODE__) ((__CONTINUOUS_MODE__) << ADC_CFGR_CONT_Pos) + + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Configure the ADC DMA continuous request for ADC multimode. + * @param __DMACONTREQ_MODE__ DMA continuous request mode. + * @retval None + */ +#define ADC_CCR_MULTI_DMACONTREQ(__DMACONTREQ_MODE__) ((__DMACONTREQ_MODE__) << ADC_CCR_DMACFG_Pos) +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Shift the offset with respect to the selected ADC resolution. + * @note Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). + * @param __HANDLE__ ADC handle + * @param __OFFSET__ Value to be shifted + * @retval None + */ +#define ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, __OFFSET__) \ + ((__OFFSET__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) + +/** + * @brief Shift the AWD1 threshold with respect to the selected ADC resolution. + * @note Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). + * @param __HANDLE__ ADC handle + * @param __THRESHOLD__ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) + +/** + * @brief Shift the AWD2 and AWD3 threshold with respect to the selected ADC resolution. + * @note Thresholds have to be left-aligned on bit 7. + * If resolution 12 bits, shift of 4 ranks on the right (the 4 LSB are discarded). + * If resolution 10 bits, shift of 2 ranks on the right (the 2 LSB are discarded). + * If resolution 8 bits, no shift. + * If resolution 6 bits, shift of 2 ranks on the left (the 2 LSB are set to 0). + * @param __HANDLE__ ADC handle + * @param __THRESHOLD__ Value to be shifted + * @retval None + */ +#define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0)) ? \ + ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ + ((__THRESHOLD__) << 2UL) \ + ) + +/** + * @brief Clear Common Control Register. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, \ + ADC_CCR_CKMODE | \ + ADC_CCR_PRESC | \ + ADC_CCR_VBATEN | \ + ADC_CCR_TSEN | \ + ADC_CCR_VREFEN | \ + ADC_CCR_MDMA | \ + ADC_CCR_DMACFG | \ + ADC_CCR_DELAY | \ + ADC_CCR_DUAL) +#else +#define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, \ + ADC_CCR_CKMODE | \ + ADC_CCR_PRESC | \ + ADC_CCR_VBATEN | \ + ADC_CCR_TSEN | \ + ADC_CCR_VREFEN) + +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Set handle instance of the ADC slave associated to the ADC master. + * @param __HANDLE_MASTER__ ADC master handle. + * @param __HANDLE_SLAVE__ ADC slave handle. + * @note if __HANDLE_MASTER__ is the handle of a slave ADC (ADC2) or an independent ADC, __HANDLE_SLAVE__ instance is + * set to NULL. + * @retval None + */ +#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \ + ( (((__HANDLE_MASTER__)->Instance == ADC1)) ? \ + ((__HANDLE_SLAVE__)->Instance = ADC2) : ((__HANDLE_SLAVE__)->Instance = NULL) ) + + +/** + * @brief Verify the ADC instance connected to the temperature sensor. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +#define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) + +/** + * @brief Verify the ADC instance connected to the battery voltage VBAT. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +#define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC2) + +/** + * @brief Verify the ADC instance connected to the internal voltage reference VREFINT. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +#define ADC_VREFINT_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) + +/** + * @brief Verify the ADC instance connected to the internal voltage reference VDDCORE. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +/* The internal voltage reference VDDCORE measurement path (channel 0) is available on ADC2 */ +#define ADC_VDDCORE_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC2) + +/** + * @brief Verify the length of scheduled injected conversions group. + * @param __LENGTH__ number of programmed conversions. + * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions) + * or RESET (__LENGTH__ is null or too large) + */ +#define IS_ADC_INJECTED_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1U)) && ((__LENGTH__) <= (4U))) + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + + +/** + * @brief Verify the ADC channel setting. + * @param __HANDLE__ ADC handle. + * @param __CHANNEL__ programmed ADC channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) (((__CHANNEL__) == ADC_CHANNEL_0) || \ + ((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) || \ + ((__CHANNEL__) == ADC_CHANNEL_16) || \ + ((__CHANNEL__) == ADC_CHANNEL_17) || \ + ((__CHANNEL__) == ADC_CHANNEL_18) || \ + ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == ADC_CHANNEL_VDDCORE) ) + +/** + * @brief Verify the ADC channel setting in differential mode. + * @param __HANDLE__ ADC handle. + * @param __CHANNEL__ programmed ADC channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_DIFF_CHANNEL(__HANDLE__, __CHANNEL__) (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) ) + +/** + * @brief Verify the ADC single-ended input or differential mode setting. + * @param __SING_DIFF__ programmed channel setting. + * @retval SET (__SING_DIFF__ is valid) or RESET (__SING_DIFF__ is invalid) + */ +#define IS_ADC_SINGLE_DIFFERENTIAL(__SING_DIFF__) (((__SING_DIFF__) == ADC_SINGLE_ENDED) || \ + ((__SING_DIFF__) == ADC_DIFFERENTIAL_ENDED) ) + +/** + * @brief Verify the ADC offset management setting. + * @param __OFFSET_NUMBER__ ADC offset management. + * @retval SET (__OFFSET_NUMBER__ is valid) or RESET (__OFFSET_NUMBER__ is invalid) + */ +#define IS_ADC_OFFSET_NUMBER(__OFFSET_NUMBER__) (((__OFFSET_NUMBER__) == ADC_OFFSET_NONE) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_1) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_2) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_3) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_4) ) + +/** + * @brief Verify the ADC offset sign setting. + * @param __OFFSET_SIGN__ ADC offset sign. + * @retval SET (__OFFSET_SIGN__ is valid) or RESET (__OFFSET_SIGN__ is invalid) + */ +#define IS_ADC_OFFSET_SIGN(__OFFSET_SIGN__) (((__OFFSET_SIGN__) == ADC_OFFSET_SIGN_NEGATIVE) || \ + ((__OFFSET_SIGN__) == ADC_OFFSET_SIGN_POSITIVE) ) + +/** + * @brief Verify the ADC injected channel setting. + * @param __CHANNEL__ programmed ADC injected channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_INJECTED_RANK(__CHANNEL__) (((__CHANNEL__) == ADC_INJECTED_RANK_1) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_2) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_3) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_4) ) + +/** + * @brief Verify the ADC injected conversions external trigger. + * @param __INJTRIG__ programmed ADC injected conversions external trigger. + * @retval SET (__INJTRIG__ is a valid value) or RESET (__INJTRIG__ is invalid) + */ +#define IS_ADC_EXTTRIGINJEC(__INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_CC4) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_CC1) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC4) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T4_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_EXT_IT15) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T9_CC1) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO2) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T12_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T9_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC3) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC1) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T6_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T15_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_LPTIM1_CH2) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_LPTIM2_CH2) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_LPTIM3_CH1) || \ + ((__INJTRIG__) == ADC_SOFTWARE_START) ) + +/** + * @brief Verify the ADC edge trigger setting for injected group. + * @param __EDGE__ programmed ADC edge trigger setting. + * @retval SET (__EDGE__ is a valid value) or RESET (__EDGE__ is invalid) + */ +#define IS_ADC_EXTTRIGINJEC_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Verify the ADC multimode setting. + * @param __MODE__ programmed ADC multimode setting. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_MULTIMODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ + ((__MODE__) == ADC_DUALMODE_REGINTERL_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_INTERL) || \ + ((__MODE__) == ADC_DUALMODE_ALTERTRIG) ) + +/** + * @brief Verify the ADC multimode DMA access setting. + * @param __MODE__ programmed ADC multimode DMA access setting. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_DMA_ACCESS_MULTIMODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \ + ((__MODE__) == ADC_DMAACCESSMODE_12_10_BITS) || \ + ((__MODE__) == ADC_DMAACCESSMODE_8_6_BITS) ) + +/** + * @brief Verify the ADC multimode delay setting. + * @param __DELAY__ programmed ADC multimode delay setting. + * @retval SET (__DELAY__ is a valid value) or RESET (__DELAY__ is invalid) + */ +#define IS_ADC_SAMPLING_DELAY(__DELAY__) (((__DELAY__) == ADC_TWOSAMPLINGDELAY_1CYCLE) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_2CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_3CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_4CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_12CYCLES) ) +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Verify the ADC analog watchdog setting. + * @param __WATCHDOG__ programmed ADC analog watchdog setting. + * @retval SET (__WATCHDOG__ is valid) or RESET (__WATCHDOG__ is invalid) + */ +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_1) || \ + ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_2) || \ + ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_3) ) + +/** + * @brief Verify the ADC analog watchdog mode setting. + * @param __WATCHDOG_MODE__ programmed ADC analog watchdog mode setting. + * @retval SET (__WATCHDOG_MODE__ is valid) or RESET (__WATCHDOG_MODE__ is invalid) + */ +#define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) + +/** + * @brief Verify the ADC analog watchdog filtering setting. + * @param __FILTERING_MODE__ programmed ADC analog watchdog mode setting. + * @retval SET (__FILTERING_MODE__ is valid) or RESET (__FILTERING_MODE__ is invalid) + */ +#define IS_ADC_ANALOG_WATCHDOG_FILTERING_MODE(__FILTERING_MODE__) \ + (((__FILTERING_MODE__) == ADC_AWD_FILTERING_NONE) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_2SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_3SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_4SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_5SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_6SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_7SAMPLES) || \ + ((__FILTERING_MODE__) == ADC_AWD_FILTERING_8SAMPLES) ) + + +/** + * @brief Verify the ADC conversion (regular or injected or both). + * @param __CONVERSION__ ADC conversion group. + * @retval SET (__CONVERSION__ is valid) or RESET (__CONVERSION__ is invalid) + */ +#define IS_ADC_CONVERSION_GROUP(__CONVERSION__) (((__CONVERSION__) == ADC_REGULAR_GROUP) || \ + ((__CONVERSION__) == ADC_INJECTED_GROUP) || \ + ((__CONVERSION__) == ADC_REGULAR_INJECTED_GROUP) ) + +/** + * @brief Verify the ADC event type. + * @param __EVENT__ ADC event. + * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) + */ +#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ + ((__EVENT__) == ADC_AWD_EVENT) || \ + ((__EVENT__) == ADC_AWD2_EVENT) || \ + ((__EVENT__) == ADC_AWD3_EVENT) || \ + ((__EVENT__) == ADC_OVR_EVENT) || \ + ((__EVENT__) == ADC_JQOVF_EVENT) ) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + +/** + * @brief Verify the ADC oversampling regular conversion resumed or continued mode. + * @param __MODE__ programmed ADC oversampling regular conversion resumed or continued mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_REGOVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_REGOVERSAMPLING_CONTINUED_MODE) || \ + ((__MODE__) == ADC_REGOVERSAMPLING_RESUMED_MODE) ) + +/** + * @brief Verify the DFSDM mode configuration. + * @param __HANDLE__ ADC handle. + * @note When DMSDFM configuration is not supported, the macro systematically reports SET. For + * this reason, the input parameter is the ADC handle and not the configuration parameter + * directly. + * @retval SET (DFSDM mode configuration is valid) or RESET (DFSDM mode configuration is invalid) + */ +#define IS_ADC_DFSDMCFG_MODE(__HANDLE__) (SET) + +/** + * @brief Return the DFSDM configuration mode. + * @param __HANDLE__ ADC handle. + * @note When DMSDFM configuration is not supported, the macro systematically reports 0x0 (i.e disabled). + * For this reason, the input parameter is the ADC handle and not the configuration parameter + * directly. + * @retval DFSDM configuration mode + */ +#define ADC_CFGR_DFSDM(__HANDLE__) (0x0UL) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); +uint32_t HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc, uint32_t SingleDiff); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, + uint32_t CalibrationFactor); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc); + +#if defined(ADC_MULTIMODE_SUPPORT) +/* ADC multimode */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_MultiModeGetValue(const ADC_HandleTypeDef *hadc); +#endif /* ADC_MULTIMODE_SUPPORT */ + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADCEx_InjectedGetValue(const ADC_HandleTypeDef *hadc, uint32_t InjectedRank); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); + +/* ADC group regular conversions stop */ +HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc); +#if defined(ADC_MULTIMODE_SUPPORT) +HAL_StatusTypeDef HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef *hadc); +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, + const ADC_InjectionConfTypeDef *pConfigInjected); +#if defined(ADC_MULTIMODE_SUPPORT) +HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, + const ADC_MultiModeTypeDef *pMultimode); +#endif /* ADC_MULTIMODE_SUPPORT */ + +HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_ADC_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cec.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cec.h new file mode 100644 index 000000000..19c1f2afb --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cec.h @@ -0,0 +1,804 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cec.h + * @author MCD Application Team + * @brief Header file of CEC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CEC_H +#define STM32H7RSxx_HAL_CEC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (CEC) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CEC_Exported_Types CEC Exported Types + * @{ + */ + +/** + * @brief CEC Init Structure definition + */ +typedef struct +{ + uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. + It can be one of CEC_Signal_Free_Time + and belongs to the set {0,...,7} where + 0x0 is the default configuration + else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ + + uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, + it can be a value of CEC_Tolerance : + it is either CEC_STANDARD_TOLERANCE or CEC_EXTENDED_TOLERANCE */ + + uint32_t BRERxStop; /*!< Set BRESTP bit CEC_BRERxStop : specifies whether or not a Bit Rising + Error stops the reception. + CEC_NO_RX_STOP_ON_BRE: reception is not stopped. + CEC_RX_STOP_ON_BRE: reception is stopped. */ + + uint32_t BREErrorBitGen; /*!< Set BREGEN bit CEC_BREErrorBitGen : specifies whether or not an + Error-Bit is generated on the + CEC line upon Bit Rising Error detection. + CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ + + uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit CEC_LBPEErrorBitGen : specifies whether or not an + Error-Bit is generated on the + CEC line upon Long Bit Period Error detection. + CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ + + uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit CEC_BroadCastMsgErrorBitGen : allows to avoid an + Error-Bit generation on the CEC line + upon an error detected on a broadcast message. + + It supersedes BREGEN and LBPEGEN bits for a broadcast message error + handling. It can take two values: + + 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. + a) BRE detection: error-bit generation on the CEC line if + BRESTP=CEC_RX_STOP_ON_BRE and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. + b) LBPE detection: error-bit generation on the CEC line + if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. + + 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. + no error-bit generation in case neither a) nor b) are satisfied. + Additionally, there is no error-bit generation in case of Short Bit + Period Error detection in a broadcast message while LSTN bit is set. */ + + uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit CEC_SFT_Option : specifies when SFT timer starts. + CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. + CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end + of message transmission/reception. */ + + uint32_t ListenMode; /*!< Set LSTN bit CEC_Listening_Mode : specifies device listening mode. + It can take two values: + + CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed + to its own address (OAR). Messages addressed to different destination + are ignored. + Broadcast messages are always received. + + CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its + own address (OAR) with positive acknowledge. Messages addressed to + different destination are received, but without interfering with the + CEC bus: no acknowledge sent. */ + + uint16_t OwnAddress; /*!< Own addresses configuration + This parameter can be a value of CEC_OWN_ADDRESS */ + + uint8_t *RxBuffer; /*!< CEC Rx buffer pointer */ + + +} CEC_InitTypeDef; + +/** + * @brief HAL CEC State definition + * @note HAL CEC State value is a combination of 2 different substates: gState and RxState + (see CEC_State_Definition). + * - gState contains CEC state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7 (not used) + * x : Should be set to 0 + * b6 Error information + * 0 : No Error + * 1 : Error + * b5 CEC peripheral initialization status + * 0 : Reset (peripheral not initialized) + * 1 : Init done (peripheral initialized. HAL CEC Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 CEC peripheral initialization status + * 0 : Reset (peripheral not initialized) + * 1 : Init done (peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_CEC_StateTypeDef; + +/** + * @brief CEC handle Structure definition + */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +typedef struct __CEC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +{ + CEC_TypeDef *Instance; /*!< CEC registers base address */ + + CEC_InitTypeDef Init; /*!< CEC communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ + + uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ + + uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of HAL_CEC_StateTypeDef */ + + HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. + This parameter can be a value of HAL_CEC_StateTypeDef */ + + uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register + in case error is reported */ + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __CEC_HandleTypeDef + *hcec); /*!< CEC Tx Transfer completed callback */ + void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, + uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ + void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ + + void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ + void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ + +#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ +} CEC_HandleTypeDef; + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL CEC Callback ID enumeration definition + */ +typedef enum +{ + HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ + HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ + HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ + HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ + HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ +} HAL_CEC_CallbackIDTypeDef; + +/** + * @brief HAL CEC Callback pointer definition + */ +typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ +typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, + uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed + callback function */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CEC_Exported_Constants CEC Exported Constants + * @{ + */ +/** @defgroup CEC_State_Definition CEC State Code Definition + * @{ + */ +#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ +#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */ +/** + * @} + */ +/** @defgroup CEC_Error_Code CEC Error Code + * @{ + */ +#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ +#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ +#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ +#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ +#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ +#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ +#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ +#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ +#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ +#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */ +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter + * @{ + */ +#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) +#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) +#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) +#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) +#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) +#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) +#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) +#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) +/** + * @} + */ + +/** @defgroup CEC_Tolerance CEC Receiver Tolerance + * @{ + */ +#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) +#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) +/** + * @} + */ + +/** @defgroup CEC_BRERxStop CEC Reception Stop on Error + * @{ + */ +#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) +#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) +/** + * @} + */ + +/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported + * @{ + */ +#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) +/** + * @} + */ + +/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported + * @{ + */ +#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) +/** + * @} + */ + +/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message + * @{ + */ +#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) +#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) +/** + * @} + */ + +/** @defgroup CEC_SFT_Option CEC Signal Free Time start option + * @{ + */ +#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) +#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) +/** + * @} + */ + +/** @defgroup CEC_Listening_Mode CEC Listening mode option + * @{ + */ +#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) +#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) +/** + * @} + */ + +/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register + * @{ + */ +#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) +/** + * @} + */ + +/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header + * @{ + */ +#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) +/** + * @} + */ + +/** @defgroup CEC_OWN_ADDRESS CEC Own Address + * @{ + */ +#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ +#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ +#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ +#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ +#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ +#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ +#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ +#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ +#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ +#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ +#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ +#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ +#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ +#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ +#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ +#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ +/** + * @} + */ + +/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition + * @{ + */ +#define CEC_IT_TXACKE CEC_IER_TXACKEIE +#define CEC_IT_TXERR CEC_IER_TXERRIE +#define CEC_IT_TXUDR CEC_IER_TXUDRIE +#define CEC_IT_TXEND CEC_IER_TXENDIE +#define CEC_IT_TXBR CEC_IER_TXBRIE +#define CEC_IT_ARBLST CEC_IER_ARBLSTIE +#define CEC_IT_RXACKE CEC_IER_RXACKEIE +#define CEC_IT_LBPE CEC_IER_LBPEIE +#define CEC_IT_SBPE CEC_IER_SBPEIE +#define CEC_IT_BRE CEC_IER_BREIE +#define CEC_IT_RXOVR CEC_IER_RXOVRIE +#define CEC_IT_RXEND CEC_IER_RXENDIE +#define CEC_IT_RXBR CEC_IER_RXBRIE +/** + * @} + */ + +/** @defgroup CEC_Flags_Definitions CEC Flags definition + * @{ + */ +#define CEC_FLAG_TXACKE CEC_ISR_TXACKE +#define CEC_FLAG_TXERR CEC_ISR_TXERR +#define CEC_FLAG_TXUDR CEC_ISR_TXUDR +#define CEC_FLAG_TXEND CEC_ISR_TXEND +#define CEC_FLAG_TXBR CEC_ISR_TXBR +#define CEC_FLAG_ARBLST CEC_ISR_ARBLST +#define CEC_FLAG_RXACKE CEC_ISR_RXACKE +#define CEC_FLAG_LBPE CEC_ISR_LBPE +#define CEC_FLAG_SBPE CEC_ISR_SBPE +#define CEC_FLAG_BRE CEC_ISR_BRE +#define CEC_FLAG_RXOVR CEC_ISR_RXOVR +#define CEC_FLAG_RXEND CEC_ISR_RXEND +#define CEC_FLAG_RXBR CEC_ISR_RXBR +/** + * @} + */ + +/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags + * @{ + */ +#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ + CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CEC_Exported_Macros CEC Exported Macros + * @{ + */ + +/** @brief Reset CEC handle gstate & RxState + * @param __HANDLE__ CEC handle. + * @retval None + */ +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** @brief Checks whether or not the specified CEC interrupt flag is set. + * @param __HANDLE__ specifies the CEC Handle. + * @param __FLAG__ specifies the flag to check. + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval ITStatus + */ +#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** @brief Clears the interrupt or status flag when raised (write at 1) + * @param __HANDLE__ specifies the CEC Handle. + * @param __FLAG__ specifies the interrupt/status flag to clear. + * This parameter can be one of the following values: + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval none + */ +#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) + +/** @brief Enables the specified CEC interrupt. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to enable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disables the specified CEC interrupt. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to disable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Checks whether or not the specified CEC interrupt is enabled. + * @param __HANDLE__ specifies the CEC Handle. + * @param __INTERRUPT__ specifies the CEC interrupt to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval FlagStatus + */ +#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) + +/** @brief Enables the CEC device + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) + +/** @brief Disables the CEC device + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) + +/** @brief Set Transmission Start flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) + +/** @brief Set Transmission End flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. + */ +#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) + +/** @brief Get Transmission Start flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) + +/** @brief Get Transmission End flag + * @param __HANDLE__ specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) + +/** @brief Clear OAR register + * @param __HANDLE__ specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) + +/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) + * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand + * @param __HANDLE__ specifies the CEC Handle. + * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position) + * @retval none + */ +#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, \ + (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CEC_Exported_Functions + * @{ + */ + +/** @addtogroup CEC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); +void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); +void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, + pCEC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, + const uint8_t *pData, uint32_t Size); +uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec); +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); +void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); +void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); +void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec); +uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CEC_Private_Types CEC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Variables CEC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Macros CEC Private Macros + * @{ + */ + +#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) + +#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ + ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) + +#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ + ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) + +#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) + +#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) + +#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) \ + (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) + +#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ + ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) + +#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ + ((__MODE__) == CEC_FULL_LISTENING_MODE)) + +/** @brief Check CEC message size. + * The message size is the payload size: without counting the header, + * it varies from 0 byte (ping operation, one header only, no payload) to + * 15 bytes (1 opcode and up to 14 operands following the header). + * @param __SIZE__ CEC message size. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) + +/** @brief Check CEC device Own Address Register (OAR) setting. + * OAR address is written in a 15-bit field within CEC_CFGR register. + * @param __ADDRESS__ CEC own address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU) + +/** @brief Check CEC initiator or destination logical address setting. + * Initiator and destination addresses are coded over 4 bits. + * @param __ADDRESS__ CEC initiator or logical address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU) +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* CEC */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxxHAL_CEC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_conf.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_conf.h new file mode 100644 index 000000000..dc922517e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_conf.h @@ -0,0 +1,507 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7rsxx_hal_conf.h. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CONF_H +#define STM32H7RSxx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_CORDIC_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DCMIPP_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_DMA2D_MODULE_ENABLED +#define HAL_DTS_MODULE_ENABLED +#define HAL_ETH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FDCAN_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GFXMMU_MODULE_ENABLED +#define HAL_GFXTIM_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_GPU2D_MODULE_ENABLED +#define HAL_HASH_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_I3C_MODULE_ENABLED +#define HAL_ICACHE_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_JPEG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_MCE_MODULE_ENABLED +#define HAL_MDF_MODULE_ENABLED +#define HAL_MMC_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_PKA_MODULE_ENABLED +#define HAL_PSSI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RAMECC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPDIFRX_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_XSPI_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 24000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up (in ms) */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low-power oscillator (CSI) default value. + * This value is the default CSI range value after Reset. + */ +#if !defined (CSI_VALUE) +#define CSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB OTG FS and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000UL /*!< Value of the Internal High Speed oscillator for USB OTG FS/RNG in Hz. + The real value my vary depending on manufacturing process variations. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz. + Value of the Internal Low Speed oscillator in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* LSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up (in ms) */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for digital audio interfaces: SPI/I2S, SAI and ADF + * This value is used by the RCC HAL module to provide the digital audio interfaces + * frequency. This clock source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000UL /*!< Value of the external clock source in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300UL /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32h7rsxx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U +#define USE_HAL_DCMIPP_REGISTER_CALLBACKS 0U +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_MDF_REGISTER_CALLBACKS 0U +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U +#define USE_HAL_PSSI_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U +#define USE_HAL_SD_REGISTER_CALLBACKS 0U +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U +#define USE_HAL_XSPI_REGISTER_CALLBACKS 0U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* ################## CRYP peripheral configuration ########################## */ + +/** + * @brief For code optimization purpose, uncomment and set to "1U" the USE_HAL_CRYP_ONLY or USE_HAL_SAES_ONLY, + * to use only one peripheral. Both defines cannot be set to "1U" at the same time. + */ + + +/* #define USE_HAL_CRYP_ONLY 1U */ +/* #define USE_HAL_SAES_ONLY 0U */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 0U + +/* ################## HASH peripheral configuration ########################## */ + +#define USE_HAL_HASH_SUSPEND_RESUME 0U + +/* ################## SDMMC peripheral configuration ######################### */ + +#define USE_SD_TRANSCEIVER 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32h7rsxx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32h7rsxx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32h7rsxx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32h7rsxx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32h7rsxx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32h7rsxx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED +#include "stm32h7rsxx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32h7rsxx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32h7rsxx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DCMIPP_MODULE_ENABLED +#include "stm32h7rsxx_hal_dcmipp.h" +#endif /* HAL_DCMIPP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED +#include "stm32h7rsxx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED +#include "stm32h7rsxx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32h7rsxx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32h7rsxx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32h7rsxx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32h7rsxx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED +#include "stm32h7rsxx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_GFXTIM_MODULE_ENABLED +#include "stm32h7rsxx_hal_gfxtim.h" +#endif /* HAL_GFXTIM_MODULE_ENABLED */ + +#ifdef HAL_GPU2D_MODULE_ENABLED +#include "stm32h7rsxx_hal_gpu2d.h" +#endif /* HAL_GPU2D_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED +#include "stm32h7rsxx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32h7rsxx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32h7rsxx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32h7rsxx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_I3C_MODULE_ENABLED +#include "stm32h7rsxx_hal_i3c.h" +#endif /* HAL_I3C_MODULE_ENABLED */ + +#ifdef HAL_ICACHE_MODULE_ENABLED +#include "stm32h7rsxx_hal_icache.h" +#endif /* HAL_ICACHE_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32h7rsxx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32h7rsxx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED +#include "stm32h7rsxx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7rsxx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7rsxx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MCE_MODULE_ENABLED +#include "stm32h7rsxx_hal_mce.h" +#endif /* HAL_MCE_MODULE_ENABLED */ + +#ifdef HAL_MDF_MODULE_ENABLED +#include "stm32h7rsxx_hal_mdf.h" +#endif /* HAL_MDF_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED +#include "stm32h7rsxx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32h7rsxx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32h7rsxx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32h7rsxx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED +#include "stm32h7rsxx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED +#include "stm32h7rsxx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32h7rsxx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED +#include "stm32h7rsxx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32h7rsxx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32h7rsxx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED +#include "stm32h7rsxx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED +#include "stm32h7rsxx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED +#include "stm32h7rsxx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32h7rsxx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32h7rsxx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#include "stm32h7rsxx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32h7rsxx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32h7rsxx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32h7rsxx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32h7rsxx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32h7rsxx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32h7rsxx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_XSPI_MODULE_ENABLED +#include "stm32h7rsxx_hal_xspi.h" +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CONF_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cordic.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cordic.h new file mode 100644 index 000000000..0d40f425d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cordic.h @@ -0,0 +1,609 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cordic.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the CORDIC firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CORDIC_H +#define STM32H7RSxx_HAL_CORDIC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(CORDIC) +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup CORDIC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORDIC_Exported_Types CORDIC Exported Types + * @{ + */ + +/** + * @brief CORDIC HAL State Structure definition + */ +typedef enum +{ + HAL_CORDIC_STATE_RESET = 0x00U, /*!< CORDIC not yet initialized or disabled */ + HAL_CORDIC_STATE_READY = 0x01U, /*!< CORDIC initialized and ready for use */ + HAL_CORDIC_STATE_BUSY = 0x02U, /*!< CORDIC internal process is ongoing */ + HAL_CORDIC_STATE_ERROR = 0x03U /*!< CORDIC error state */ +} HAL_CORDIC_StateTypeDef; + +/** + * @brief CORDIC Handle Structure definition + */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +typedef struct __CORDIC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ +{ + CORDIC_TypeDef *Instance; /*!< Register base address */ + + const int32_t *pInBuff; /*!< Pointer to CORDIC input data buffer */ + + int32_t *pOutBuff; /*!< Pointer to CORDIC output data buffer */ + + uint32_t NbCalcToOrder; /*!< Remaining number of calculation to order */ + + uint32_t NbCalcToGet; /*!< Remaining number of calculation result to get */ + + uint32_t DMADirection; /*!< Direction of CORDIC DMA transfers */ + + DMA_HandleTypeDef *hdmaIn; /*!< CORDIC peripheral input data DMA handle parameters */ + + DMA_HandleTypeDef *hdmaOut; /*!< CORDIC peripheral output data DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< CORDIC locking object */ + + __IO HAL_CORDIC_StateTypeDef State; /*!< CORDIC state */ + + __IO uint32_t ErrorCode; /*!< CORDIC peripheral error code + This parameter can be a value of @ref CORDIC_Error_Code */ + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + void (* ErrorCallback)(struct __CORDIC_HandleTypeDef *hcordic); /*!< CORDIC error callback */ + void (* CalculateCpltCallback)(struct __CORDIC_HandleTypeDef *hcordic); /*!< CORDIC calculate complete callback */ + + void (* MspInitCallback)(struct __CORDIC_HandleTypeDef *hcordic); /*!< CORDIC Msp Init callback */ + void (* MspDeInitCallback)(struct __CORDIC_HandleTypeDef *hcordic); /*!< CORDIC Msp DeInit callback */ + +#endif /* (USE_HAL_CORDIC_REGISTER_CALLBACKS) */ + +} CORDIC_HandleTypeDef; + +/** + * @brief CORDIC Config Structure definition + */ +typedef struct +{ + uint32_t Function; /*!< Function + This parameter can be a value of @ref CORDIC_Function */ + + uint32_t Scale; /*!< Scaling factor + This parameter can be a value of @ref CORDIC_Scale */ + + uint32_t InSize; /*!< Width of input data + This parameter can be a value of @ref CORDIC_In_Size */ + + uint32_t OutSize; /*!< Width of output data + This parameter can be a value of @ref CORDIC_Out_Size */ + + uint32_t NbWrite; /*!< Number of 32-bit write expected for one calculation + This parameter can be a value of @ref CORDIC_Nb_Write */ + + uint32_t NbRead; /*!< Number of 32-bit read expected after one calculation + This parameter can be a value of @ref CORDIC_Nb_Read */ + + uint32_t Precision; /*!< Number of cycles for calculation + This parameter can be a value of @ref CORDIC_Precision_In_Cycles_Number */ + +} CORDIC_ConfigTypeDef; + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +/** + * @brief HAL CORDIC Callback ID enumeration definition + */ +typedef enum +{ + HAL_CORDIC_ERROR_CB_ID = 0x00U, /*!< CORDIC error callback ID */ + HAL_CORDIC_CALCULATE_CPLT_CB_ID = 0x01U, /*!< CORDIC calculate complete callback ID */ + + HAL_CORDIC_MSPINIT_CB_ID = 0x02U, /*!< CORDIC MspInit callback ID */ + HAL_CORDIC_MSPDEINIT_CB_ID = 0x03U, /*!< CORDIC MspDeInit callback ID */ + +} HAL_CORDIC_CallbackIDTypeDef; + +/** + * @brief HAL CORDIC Callback pointer definition + */ +typedef void (*pCORDIC_CallbackTypeDef)(CORDIC_HandleTypeDef *hcordic); /*!< pointer to a CORDIC callback function */ + +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORDIC_Exported_Constants CORDIC Exported Constants + * @{ + */ + +/** @defgroup CORDIC_Error_Code CORDIC Error code + * @{ + */ +#define HAL_CORDIC_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_CORDIC_ERROR_PARAM ((uint32_t)0x00000001U) /*!< Wrong parameter error */ +#define HAL_CORDIC_ERROR_NOT_READY ((uint32_t)0x00000002U) /*!< Peripheral not ready */ +#define HAL_CORDIC_ERROR_TIMEOUT ((uint32_t)0x00000004U) /*!< Timeout error */ +#define HAL_CORDIC_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA error */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +#define HAL_CORDIC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup CORDIC_Function CORDIC Function + * @{ + */ +#define CORDIC_FUNCTION_COSINE (0x00000000U) /*!< Cosine */ +#define CORDIC_FUNCTION_SINE ((uint32_t)(CORDIC_CSR_FUNC_0)) /*!< Sine */ +#define CORDIC_FUNCTION_PHASE ((uint32_t)(CORDIC_CSR_FUNC_1)) /*!< Phase */ +#define CORDIC_FUNCTION_MODULUS ((uint32_t)(CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0)) /*!< Modulus */ +#define CORDIC_FUNCTION_ARCTANGENT ((uint32_t)(CORDIC_CSR_FUNC_2)) /*!< Arctangent */ +#define CORDIC_FUNCTION_HCOSINE ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_0)) /*!< Hyperbolic Cosine */ +#define CORDIC_FUNCTION_HSINE ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1)) /*!< Hyperbolic Sine */ +#define CORDIC_FUNCTION_HARCTANGENT ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0))/*!< Hyperbolic Arctangent */ +#define CORDIC_FUNCTION_NATURALLOG ((uint32_t)(CORDIC_CSR_FUNC_3)) /*!< Natural Logarithm */ +#define CORDIC_FUNCTION_SQUAREROOT ((uint32_t)(CORDIC_CSR_FUNC_3 | CORDIC_CSR_FUNC_0)) /*!< Square Root */ +/** + * @} + */ + +/** @defgroup CORDIC_Precision_In_Cycles_Number CORDIC Precision in Cycles Number + * @{ + */ +/* Note: 1 cycle corresponds to 4 algorithm iterations */ +#define CORDIC_PRECISION_1CYCLE ((uint32_t)(CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_2CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_1)) +#define CORDIC_PRECISION_3CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_4CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2)) +#define CORDIC_PRECISION_5CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_6CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1)) +#define CORDIC_PRECISION_7CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2\ + | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_8CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3)) +#define CORDIC_PRECISION_9CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_10CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_1)) +#define CORDIC_PRECISION_11CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_12CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2)) +#define CORDIC_PRECISION_13CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0)) +#define CORDIC_PRECISION_14CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1)) +#define CORDIC_PRECISION_15CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1\ + |CORDIC_CSR_PRECISION_0)) +/** + * @} + */ + +/** @defgroup CORDIC_Scale CORDIC Scaling factor + * @{ + */ +/* Scale factor value 'n' implies that the input data have been multiplied + by a factor 2exp(-n), and/or the output data need to be multiplied by 2exp(n). */ +#define CORDIC_SCALE_0 (0x00000000U) +#define CORDIC_SCALE_1 ((uint32_t)(CORDIC_CSR_SCALE_0)) +#define CORDIC_SCALE_2 ((uint32_t)(CORDIC_CSR_SCALE_1)) +#define CORDIC_SCALE_3 ((uint32_t)(CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0)) +#define CORDIC_SCALE_4 ((uint32_t)(CORDIC_CSR_SCALE_2)) +#define CORDIC_SCALE_5 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_0)) +#define CORDIC_SCALE_6 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1)) +#define CORDIC_SCALE_7 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0)) +/** + * @} + */ + +/** @defgroup CORDIC_Interrupts_Enable CORDIC Interrupts Enable bit + * @{ + */ +#define CORDIC_IT_IEN CORDIC_CSR_IEN /*!< Result ready interrupt enable */ +/** + * @} + */ + +/** @defgroup CORDIC_DMAR DMA Read Request Enable bit + * @{ + */ +#define CORDIC_DMA_REN CORDIC_CSR_DMAREN /*!< DMA Read requests enable */ +/** + * @} + */ + +/** @defgroup CORDIC_DMAW DMA Write Request Enable bit + * @{ + */ +#define CORDIC_DMA_WEN CORDIC_CSR_DMAWEN /*!< DMA Write channel enable */ +/** + * @} + */ + +/** @defgroup CORDIC_Nb_Write CORDIC Number of 32-bit write required for one calculation + * @{ + */ +#define CORDIC_NBWRITE_1 (0x00000000U) /*!< One 32-bits write containing either only one + 32-bit data input (Q1.31 format), or two 16-bit + data input (Q1.15 format) packed in one 32 bits + Data */ +#define CORDIC_NBWRITE_2 CORDIC_CSR_NARGS /*!< Two 32-bit write containing two 32-bits data input + (Q1.31 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_Nb_Read CORDIC Number of 32-bit read required after one calculation + * @{ + */ +#define CORDIC_NBREAD_1 (0x00000000U) /*!< One 32-bits read containing either only one + 32-bit data output (Q1.31 format), or two 16-bit + data output (Q1.15 format) packed in one 32 bits + Data */ +#define CORDIC_NBREAD_2 CORDIC_CSR_NRES /*!< Two 32-bit Data containing two 32-bits data output + (Q1.31 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_In_Size CORDIC input data size + * @{ + */ +#define CORDIC_INSIZE_32BITS (0x00000000U) /*!< 32 bits input data size (Q1.31 format) */ +#define CORDIC_INSIZE_16BITS CORDIC_CSR_ARGSIZE /*!< 16 bits input data size (Q1.15 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_Out_Size CORDIC Results Size + * @{ + */ +#define CORDIC_OUTSIZE_32BITS (0x00000000U) /*!< 32 bits output data size (Q1.31 format) */ +#define CORDIC_OUTSIZE_16BITS CORDIC_CSR_RESSIZE /*!< 16 bits output data size (Q1.15 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_Flags CORDIC status flags + * @{ + */ +#define CORDIC_FLAG_RRDY CORDIC_CSR_RRDY /*!< Result Ready Flag */ +/** + * @} + */ + +/** @defgroup CORDIC_DMA_Direction CORDIC DMA direction + * @{ + */ +#define CORDIC_DMA_DIR_NONE ((uint32_t)0x00000000U) /*!< DMA direction : none */ +#define CORDIC_DMA_DIR_IN ((uint32_t)0x00000001U) /*!< DMA direction : Input of CORDIC */ +#define CORDIC_DMA_DIR_OUT ((uint32_t)0x00000002U) /*!< DMA direction : Output of CORDIC */ +#define CORDIC_DMA_DIR_IN_OUT ((uint32_t)0x00000003U) /*!< DMA direction : Input and Output of CORDIC */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CORDIC_Exported_Macros CORDIC Exported Macros + * @{ + */ + +/** @brief Reset CORDIC handle state. + * @param __HANDLE__ CORDIC handle + * @retval None + */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +#define __HAL_CORDIC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_CORDIC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_CORDIC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CORDIC_STATE_RESET) +#endif /*USE_HAL_CORDIC_REGISTER_CALLBACKS */ + +/** + * @brief Enable the CORDIC interrupt when result is ready + * @param __HANDLE__ CORDIC handle. + * @param __INTERRUPT__ CORDIC Interrupt. + * This parameter can be one of the following values: + * @arg @ref CORDIC_IT_IEN Enable Interrupt + * @retval None + */ +#define __HAL_CORDIC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CSR) |= (__INTERRUPT__)) + +/** + * @brief Disable the CORDIC interrupt + * @param __HANDLE__ CORDIC handle. + * @param __INTERRUPT__ CORDIC Interrupt. + * This parameter can be one of the following values: + * @arg @ref CORDIC_IT_IEN Enable Interrupt + * @retval None + */ +#define __HAL_CORDIC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CSR) &= ~(__INTERRUPT__)) + +/** @brief Check whether the specified CORDIC interrupt occurred or not. + Dummy macro as no interrupt status flag. + * @param __HANDLE__ CORDIC handle. + * @param __INTERRUPT__ CORDIC interrupt to check + * @retval SET (interrupt occurred) or RESET (interrupt did not occurred) + */ +#define __HAL_CORDIC_GET_IT(__HANDLE__, __INTERRUPT__) /* Dummy macro */ + +/** @brief Clear specified CORDIC interrupt status. Dummy macro as no + interrupt status flag. + * @param __HANDLE__ CORDIC handle. + * @param __INTERRUPT__ CORDIC interrupt to clear + * @retval None + */ +#define __HAL_CORDIC_CLEAR_IT(__HANDLE__, __INTERRUPT__) /* Dummy macro */ + +/** @brief Check whether the specified CORDIC status flag is set or not. + * @param __HANDLE__ CORDIC handle. + * @param __FLAG__ CORDIC flag to check + * This parameter can be one of the following values: + * @arg @ref CORDIC_FLAG_RRDY Result Ready Flag + * @retval SET (flag is set) or RESET (flag is reset) + */ +#define __HAL_CORDIC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->CSR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear specified CORDIC status flag. Dummy macro as no + flag can be cleared. + * @param __HANDLE__ CORDIC handle. + * @param __FLAG__ CORDIC flag to clear + * This parameter can be one of the following values: + * @arg @ref CORDIC_FLAG_RRDY Result Ready Flag + * @retval None + */ +#define __HAL_CORDIC_CLEAR_FLAG(__HANDLE__, __FLAG__) /* Dummy macro */ + +/** @brief Check whether the specified CORDIC interrupt is enabled or not. + * @param __HANDLE__ CORDIC handle. + * @param __INTERRUPT__ CORDIC interrupt to check + * This parameter can be one of the following values: + * @arg @ref CORDIC_IT_IEN Enable Interrupt + * @retval FlagStatus + */ +#define __HAL_CORDIC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CSR) & (__INTERRUPT__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CORDIC_Private_Macros CORDIC Private Macros + * @{ + */ + +/** + * @brief Verify the CORDIC function. + * @param __FUNCTION__ Name of the function. + * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid) + */ +#define IS_CORDIC_FUNCTION(__FUNCTION__) (((__FUNCTION__) == CORDIC_FUNCTION_COSINE) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_SINE) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_PHASE) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_MODULUS) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_ARCTANGENT) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_HCOSINE) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_HSINE) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_HARCTANGENT) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_NATURALLOG) || \ + ((__FUNCTION__) == CORDIC_FUNCTION_SQUAREROOT)) + + +/** + * @brief Verify the CORDIC precision. + * @param __PRECISION__ CORDIC Precision in Cycles Number. + * @retval SET (__PRECISION__ is a valid value) or RESET (__PRECISION__ is invalid) + */ +#define IS_CORDIC_PRECISION(__PRECISION__) (((__PRECISION__) == CORDIC_PRECISION_1CYCLE) || \ + ((__PRECISION__) == CORDIC_PRECISION_2CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_3CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_4CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_5CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_6CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_7CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_8CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_9CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_10CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_11CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_12CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_13CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_14CYCLES) || \ + ((__PRECISION__) == CORDIC_PRECISION_15CYCLES)) + +/** + * @brief Verify the CORDIC scaling factor. + * @param __SCALE__ Number of cycles for calculation, 1 cycle corresponding to 4 algorithm iterations. + * @retval SET (__SCALE__ is a valid value) or RESET (__SCALE__ is invalid) + */ +#define IS_CORDIC_SCALE(__SCALE__) (((__SCALE__) == CORDIC_SCALE_0) || \ + ((__SCALE__) == CORDIC_SCALE_1) || \ + ((__SCALE__) == CORDIC_SCALE_2) || \ + ((__SCALE__) == CORDIC_SCALE_3) || \ + ((__SCALE__) == CORDIC_SCALE_4) || \ + ((__SCALE__) == CORDIC_SCALE_5) || \ + ((__SCALE__) == CORDIC_SCALE_6) || \ + ((__SCALE__) == CORDIC_SCALE_7)) + +/** + * @brief Verify the CORDIC number of 32-bits write expected for one calculation. + * @param __NBWRITE__ Number of 32-bits write expected for one calculation. + * @retval SET (__NBWRITE__ is a valid value) or RESET (__NBWRITE__ is invalid) + */ +#define IS_CORDIC_NBWRITE(__NBWRITE__) (((__NBWRITE__) == CORDIC_NBWRITE_1) || \ + ((__NBWRITE__) == CORDIC_NBWRITE_2)) + +/** + * @brief Verify the CORDIC number of 32-bits read expected after one calculation. + * @param __NBREAD__ Number of 32-bits read expected after one calculation. + * @retval SET (__NBREAD__ is a valid value) or RESET (__NBREAD__ is invalid) + */ +#define IS_CORDIC_NBREAD(__NBREAD__) (((__NBREAD__) == CORDIC_NBREAD_1) || \ + ((__NBREAD__) == CORDIC_NBREAD_2)) + +/** + * @brief Verify the CORDIC input data size for one calculation. + * @param __INSIZE__ input data size for one calculation. + * @retval SET (__INSIZE__ is a valid value) or RESET (__INSIZE__ is invalid) + */ +#define IS_CORDIC_INSIZE(__INSIZE__) (((__INSIZE__) == CORDIC_INSIZE_32BITS) || \ + ((__INSIZE__) == CORDIC_INSIZE_16BITS)) + +/** + * @brief Verify the CORDIC output data size for one calculation. + * @param __OUTSIZE__ output data size for one calculation. + * @retval SET (__OUTSIZE__ is a valid value) or RESET (__OUTSIZE__ is invalid) + */ +#define IS_CORDIC_OUTSIZE(__OUTSIZE__) (((__OUTSIZE__) == CORDIC_OUTSIZE_32BITS) || \ + ((__OUTSIZE__) == CORDIC_OUTSIZE_16BITS)) + +/** + * @brief Verify the CORDIC DMA transfer Direction. + * @param __DMADIR__ DMA transfer direction. + * @retval SET (__DMADIR__ is a valid value) or RESET (__DMADIR__ is invalid) + */ +#define IS_CORDIC_DMA_DIRECTION(__DMADIR__) (((__DMADIR__) == CORDIC_DMA_DIR_IN) || \ + ((__DMADIR__) == CORDIC_DMA_DIR_OUT) || \ + ((__DMADIR__) == CORDIC_DMA_DIR_IN_OUT)) + +/** + * @} + */ + +/** @addtogroup CORDIC_Exported_Functions + * @{ + */ +/* Exported functions ------------------------------------------------------- */ + +/** @addtogroup CORDIC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_CORDIC_Init(CORDIC_HandleTypeDef *hcordic); +HAL_StatusTypeDef HAL_CORDIC_DeInit(CORDIC_HandleTypeDef *hcordic); +void HAL_CORDIC_MspInit(CORDIC_HandleTypeDef *hcordic); +void HAL_CORDIC_MspDeInit(CORDIC_HandleTypeDef *hcordic); + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_CORDIC_RegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID, + pCORDIC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CORDIC_UnRegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID); +/** + * @} + */ + +/** @addtogroup CORDIC_Exported_Functions_Group2 + * @{ + */ +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_CORDIC_Configure(CORDIC_HandleTypeDef *hcordic, const CORDIC_ConfigTypeDef *sConfig); +HAL_StatusTypeDef HAL_CORDIC_Calculate(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t Timeout); +HAL_StatusTypeDef HAL_CORDIC_CalculateZO(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t Timeout); +HAL_StatusTypeDef HAL_CORDIC_Calculate_IT(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc); +HAL_StatusTypeDef HAL_CORDIC_Calculate_DMA(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t DMADirection); +/** + * @} + */ + +/** @addtogroup CORDIC_Exported_Functions_Group3 + * @{ + */ +/* Callback functions *********************************************************/ +void HAL_CORDIC_ErrorCallback(CORDIC_HandleTypeDef *hcordic); +void HAL_CORDIC_CalculateCpltCallback(CORDIC_HandleTypeDef *hcordic); +/** + * @} + */ + +/** @addtogroup CORDIC_Exported_Functions_Group4 + * @{ + */ +/* IRQ handler management *****************************************************/ +void HAL_CORDIC_IRQHandler(CORDIC_HandleTypeDef *hcordic); +/** + * @} + */ + +/** @addtogroup CORDIC_Exported_Functions_Group5 + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_CORDIC_StateTypeDef HAL_CORDIC_GetState(const CORDIC_HandleTypeDef *hcordic); +uint32_t HAL_CORDIC_GetError(const CORDIC_HandleTypeDef *hcordic); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* CORDIC */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CORDIC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cortex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cortex.h new file mode 100644 index 000000000..0bd581600 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cortex.h @@ -0,0 +1,409 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CORTEX_H +#define STM32H7RSxx_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 7U /*!< 0 bit for pre-emption priority, + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 6U /*!< 1 bit for pre-emption priority, + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 5U /*!< 2 bits for pre-emption priority, + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 4U /*!< 3 bits for pre-emption priority, + 1 bit for subpriority */ +#define NVIC_PRIORITYGROUP_4 3U /*!< 4 bits for pre-emption priority, + 0 bit for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0U +#define SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk + +/** + * @} + */ + +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0U +#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk +#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE 1U +#define MPU_REGION_DISABLE 0U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE 0U +#define MPU_INSTRUCTION_ACCESS_DISABLE 1U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_NOT_SHAREABLE 0U +#define MPU_ACCESS_SHAREABLE 1U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE 1U +#define MPU_ACCESS_NOT_CACHEABLE 0U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE 1U +#define MPU_ACCESS_NOT_BUFFERABLE 0U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 0U +#define MPU_TEX_LEVEL1 1U +#define MPU_TEX_LEVEL2 2U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B 0x04U +#define MPU_REGION_SIZE_64B 0x05U +#define MPU_REGION_SIZE_128B 0x06U +#define MPU_REGION_SIZE_256B 0x07U +#define MPU_REGION_SIZE_512B 0x08U +#define MPU_REGION_SIZE_1KB 0x09U +#define MPU_REGION_SIZE_2KB 0x0AU +#define MPU_REGION_SIZE_4KB 0x0BU +#define MPU_REGION_SIZE_8KB 0x0CU +#define MPU_REGION_SIZE_16KB 0x0DU +#define MPU_REGION_SIZE_32KB 0x0EU +#define MPU_REGION_SIZE_64KB 0x0FU +#define MPU_REGION_SIZE_128KB 0x10U +#define MPU_REGION_SIZE_256KB 0x11U +#define MPU_REGION_SIZE_512KB 0x12U +#define MPU_REGION_SIZE_1MB 0x13U +#define MPU_REGION_SIZE_2MB 0x14U +#define MPU_REGION_SIZE_4MB 0x15U +#define MPU_REGION_SIZE_8MB 0x16U +#define MPU_REGION_SIZE_16MB 0x17U +#define MPU_REGION_SIZE_32MB 0x18U +#define MPU_REGION_SIZE_64MB 0x19U +#define MPU_REGION_SIZE_128MB 0x1AU +#define MPU_REGION_SIZE_256MB 0x1BU +#define MPU_REGION_SIZE_512MB 0x1CU +#define MPU_REGION_SIZE_1GB 0x1DU +#define MPU_REGION_SIZE_2GB 0x1EU +#define MPU_REGION_SIZE_4GB 0x1FU +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS 0U +#define MPU_REGION_PRIV_RW 1U +#define MPU_REGION_PRIV_RW_URO 2U +#define MPU_REGION_FULL_ACCESS 3U +#define MPU_REGION_PRIV_RO 5U +#define MPU_REGION_PRIV_RO_URO 6U +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 0U +#define MPU_REGION_NUMBER1 1U +#define MPU_REGION_NUMBER2 2U +#define MPU_REGION_NUMBER3 3U +#define MPU_REGION_NUMBER4 4U +#define MPU_REGION_NUMBER5 5U +#define MPU_REGION_NUMBER6 6U +#define MPU_REGION_NUMBER7 7U +#define MPU_REGION_NUMBER8 8U +#define MPU_REGION_NUMBER9 9U +#define MPU_REGION_NUMBER10 10U +#define MPU_REGION_NUMBER11 11U +#define MPU_REGION_NUMBER12 12U +#define MPU_REGION_NUMBER13 13U +#define MPU_REGION_NUMBER14 14U +#define MPU_REGION_NUMBER15 15U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_EnableRegion(uint32_t RegionNumber); +void HAL_MPU_DisableRegion(uint32_t RegionNumber); +void HAL_MPU_ConfigRegion(const MPU_Region_InitTypeDef *pMPU_RegionInit); +void HAL_CORTEX_ClearEvent(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(__GROUP__) (((__GROUP__) == NVIC_PRIORITYGROUP_0) || \ + ((__GROUP__) == NVIC_PRIORITYGROUP_1) || \ + ((__GROUP__) == NVIC_PRIORITYGROUP_2) || \ + ((__GROUP__) == NVIC_PRIORITYGROUP_3) || \ + ((__GROUP__) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(__PRIO__, __PRIOGRP__) (((__PRIO__) < (1uL << __NVIC_PRIO_BITS)) && \ + ((__PRIO__) < (0x1uL << (0x07u - __PRIOGRP__)))) + +#define IS_NVIC_SUB_PRIORITY(__PRIO__, __PRIOGRP__) \ + ((__PRIOGRP__ < (0x07u - __NVIC_PRIO_BITS)) ?\ + ((__PRIO__) < (1u)): \ + ((__PRIO__) < (0x1uL << (__PRIOGRP__ - (0x07u - __NVIC_PRIO_BITS))))) + +#define IS_NVIC_DEVICE_IRQ(__IRQ__) ((__IRQ__) > SysTick_IRQn) + +#define IS_NVIC_PRIO_INTERRUPT(__IT__) (((__IT__) > HardFault_IRQn) && ((__IT__) != DebugMonitor_IRQn)) + +#define IS_SYSTICK_CLK_SOURCE(__SOURCE__) (((__SOURCE__) == SYSTICK_CLKSOURCE_HCLK) || \ + ((__SOURCE__) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#define IS_MPU_REGION_ENABLE(__STATE__) (((__STATE__) == MPU_REGION_ENABLE) || \ + ((__STATE__) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(__STATE__) (((__STATE__) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((__STATE__) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(__STATE__) (((__STATE__) == MPU_ACCESS_SHAREABLE) || \ + ((__STATE__) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(__STATE__) (((__STATE__) == MPU_ACCESS_CACHEABLE) || \ + ((__STATE__) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(__STATE__) (((__STATE__) == MPU_ACCESS_BUFFERABLE) || \ + ((__STATE__) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(__TYPE__) (((__TYPE__) == MPU_TEX_LEVEL0) || \ + ((__TYPE__) == MPU_TEX_LEVEL1) || \ + ((__TYPE__) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(__TYPE__) (((__TYPE__) == MPU_REGION_NO_ACCESS) || \ + ((__TYPE__) == MPU_REGION_PRIV_RW) || \ + ((__TYPE__) == MPU_REGION_PRIV_RW_URO) || \ + ((__TYPE__) == MPU_REGION_FULL_ACCESS) || \ + ((__TYPE__) == MPU_REGION_PRIV_RO) || \ + ((__TYPE__) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(__NUMBER__) ((__NUMBER__) <= MPU_REGION_NUMBER15) + +#define IS_MPU_REGION_SIZE(__SIZE__) (((__SIZE__) == MPU_REGION_SIZE_32B) || \ + ((__SIZE__) == MPU_REGION_SIZE_64B) || \ + ((__SIZE__) == MPU_REGION_SIZE_128B) || \ + ((__SIZE__) == MPU_REGION_SIZE_256B) || \ + ((__SIZE__) == MPU_REGION_SIZE_512B) || \ + ((__SIZE__) == MPU_REGION_SIZE_1KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_2KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_4KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_8KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_16KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_32KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_64KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_128KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_256KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_512KB) || \ + ((__SIZE__) == MPU_REGION_SIZE_1MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_2MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_4MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_8MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_16MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_32MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_64MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_128MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_256MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_512MB) || \ + ((__SIZE__) == MPU_REGION_SIZE_1GB) || \ + ((__SIZE__) == MPU_REGION_SIZE_2GB) || \ + ((__SIZE__) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(__SUBREGION__) ((__SUBREGION__) < (uint16_t)0x00FFU) + +#define IS_MPU_ADDRESS_MULTIPLE_SIZE(__ADDRESS__, __SIZE__) (((__ADDRESS__) & (1<<(__SIZE__+1U))- 1U) == 0U) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CORTEX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc.h new file mode 100644 index 000000000..92fdacce6 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_crc.h + * @author MCD Application Team + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CRC_H +#define STM32H7RSxx_HAL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ +} HAL_CRC_StateTypeDef; + +/** + * @brief CRC Init Structure definition + */ +typedef struct +{ + uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. + If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default + X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + + X^4 + X^2+ X +1. + In that case, there is no need to set GeneratingPolynomial field. + If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and + CRCLength fields must be set. */ + + uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. + If set to DEFAULT_INIT_VALUE_ENABLE, resort to default + 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If + otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ + + uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree + respectively equal to 7, 8, 16 or 32. This field is written in normal, + representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 + is written 0x65. No need to specify it if DefaultPolynomialUse is set to + DEFAULT_POLYNOMIAL_ENABLE. */ + + uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. + Value can be either one of + @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), + @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), + @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), + @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ + + uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse + is set to DEFAULT_INIT_VALUE_ENABLE. */ + + uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. + Can be either one of the following values + @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion + @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D + becomes 0x58D43CB2 + @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, + 0x1A2B3C4D becomes 0xD458B23C + @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D + becomes 0xB23CD458 */ + + uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. + Can be either + @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, + @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted + into 0x22CC4488 */ +} CRC_InitTypeDef; + +/** + * @brief CRC Handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + CRC_InitTypeDef Init; /*!< CRC configuration parameters */ + + HAL_LockTypeDef Lock; /*!< CRC Locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + + uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. + Can be either + @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes + (8-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of + half-words (16-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words + (32-bit data) + + Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization + error must occur if InputBufferFormat is not one of the three values listed + above */ +} CRC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial + * @{ + */ +#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used + * @{ + */ +#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ +#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used + * @{ + */ +#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ +#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral + * @{ + */ +#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ +#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ +#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ +#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions + * @{ + */ +#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ +#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ +#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ +#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ +/** + * @} + */ + +/** @defgroup CRC_Input_Buffer_Format Input Buffer Format + * @{ + */ +/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but + * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set + * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for + * the CRC APIs to provide a correct result */ +#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ +#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ +#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ +#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state. + * @param __HANDLE__ CRC handle. + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Reset CRC Data Register. + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) + +/** + * @brief Set CRC INIT non-default value + * @param __HANDLE__ CRC handle + * @param __INIT__ 32-bit initial value + * @retval None + */ +#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) + +/** + * @brief Store data in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @param __VALUE__ Value to be stored in the ID register + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Return the data stored in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval Value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRC_Private_Macros CRC Private Macros + * @{ + */ + +#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ + ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) + +#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ + ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) + +#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ + ((LENGTH) == CRC_POLYLENGTH_16B) || \ + ((LENGTH) == CRC_POLYLENGTH_8B) || \ + ((LENGTH) == CRC_POLYLENGTH_7B)) + +#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) + +/** + * @} + */ + +/* Include CRC HAL Extended module */ +#include "stm32h7rsxx_hal_crc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CRC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc_ex.h new file mode 100644 index 000000000..501c413e3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_crc_ex.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_crc_ex.h + * @author MCD Application Team + * @brief Header file of CRC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CRC_EX_H +#define STM32H7RSxx_HAL_CRC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup CRCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants + * @{ + */ + +/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes + * @{ + */ +#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */ +#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */ +/** + * @} + */ + +/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes + * @{ + */ +#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */ +#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros + * @{ + */ + +/** + * @brief Set CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT) + +/** + * @brief Unset CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT)) + +/** + * @brief Set CRC non-default polynomial + * @param __HANDLE__ CRC handle + * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial + * @retval None + */ +#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros + * @{ + */ + +#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_WORD)) + +#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \ + ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRCEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRCEx_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength); +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode); +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CRC_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp.h new file mode 100644 index 000000000..89d72871a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp.h @@ -0,0 +1,944 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cryp.h + * @author MCD Application Team + * @brief Header file of CRYP HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CRYP_H +#define STM32H7RSxx_HAL_CRYP_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(USE_HAL_SAES_ONLY) && (USE_HAL_SAES_ONLY == 1U) +#if !defined(USE_HAL_CRYP_ONLY) +#define USE_HAL_CRYP_ONLY 0U +#elif (USE_HAL_CRYP_ONLY == 1U) +#error ' USE_HAL_CRYP_ONLY and USE_HAL_SAES_ONLY cannot be set both to 1U ' +#endif /* defined (USE_HAL_CRYP_ONLY) */ +#endif /* defined (USE_HAL_SAES_ONLY) */ + +#if defined(USE_HAL_CRYP_ONLY) && (USE_HAL_CRYP_ONLY == 1U) +#if !defined(USE_HAL_SAES_ONLY) +#define USE_HAL_SAES_ONLY 0U +#elif (USE_HAL_SAES_ONLY == 1U) +#error ' USE_HAL_CRYP_ONLY and USE_HAL_SAES_ONLY cannot be set both to 1U ' +#endif /* defined (USE_HAL_SAES_ONLY) */ +#endif /* defined (USE_HAL_CRYP_ONLY) */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (CRYP) +/** @addtogroup CRYP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Types CRYP Exported Types + * @{ + */ + +/** + * @brief CRYP Init Structure definition + */ + +typedef struct +{ + uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. + This parameter can be a value of @ref CRYP_Data_Type */ + uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1. + This parameter can be a value of @ref CRYP_Key_Size */ + uint32_t *pKey; /*!< The key used for encryption/decryption */ + uint32_t *pInitVect; /*!< The initialization vector used also as initialization + counter in CTR mode */ + uint32_t Algorithm; /*!< AES Algorithm ECB/CBC/CTR/GCM or CCM + This parameter can be a value of @ref CRYP_CR_ALGOMODE */ + uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication, + GCM : also known as Additional Authentication Data + CCM : named B1 composed of the associated data length and Associated Data. */ + uint32_t HeaderSize; /*!< The size of header buffer in word */ + uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */ + uint32_t DataWidthUnit; /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/ + uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value + of @ref CRYP_Header_Width_Unit */ + uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, + to configure Key and Initialization + Vector only once and to skip configuration for consecutive processing. + This parameter can be a value of @ref CRYP_Configuration_Skip */ + uint32_t KeyMode; /*!< Key mode selection, this parameter can be a value of @ref CRYP_Key_Mode */ + uint32_t KeySelect; /*!< Only for SAES : Key selection, this parameter can be a value + of @ref CRYP_Key_Select */ + +} CRYP_ConfigTypeDef; + + +/** + * @brief CRYP State Structure definition + */ + +typedef enum +{ + HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ + HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ + HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP BUSY, internal processing is ongoing */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + HAL_CRYP_STATE_SUSPENDED = 0x03U, /*!< CRYP suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +} HAL_CRYP_STATETypeDef; + + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief HAL CRYP mode suspend definitions + */ + +typedef enum +{ + HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP processing suspension not requested */ + HAL_CRYP_SUSPEND = 0x01U /*!< CRYP processing suspension requested */ +} HAL_SuspendTypeDef; +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +/** + * @brief CRYP handle Structure definition + */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +typedef struct __CRYP_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ +{ + void *Instance; /*!< CRYP or SAES registers base address */ + + CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ + + uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) + buffer */ + + uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) + buffer */ + + __IO uint16_t CrypHeaderCount; /*!< Counter of header data */ + + __IO uint16_t CrypInCount; /*!< Counter of input data */ + + __IO uint16_t CrypOutCount; /*!< Counter of output data */ + + uint16_t Size; /*!< length of input data in word or in byte, + according to DataWidthUnit */ + + uint32_t Phase; /*!< CRYP peripheral phase */ + + DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ + + DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< CRYP locking object */ + + __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ + + __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ + + uint32_t Version; /*!< CRYP1 IP version*/ + + uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when + configuration can be skipped */ + + uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored + for a single signature computation after several + messages processing */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */ + void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */ + void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */ + + void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */ + void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */ + +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + + __IO HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */ + + CRYP_ConfigTypeDef Init_saved; /*!< copy of CRYP required parameters when processing + is suspended */ + + uint32_t *pCrypInBuffPtr_saved; /*!< copy of CRYP input pointer when processing + is suspended */ + + uint32_t *pCrypOutBuffPtr_saved; /*!< copy of CRYP output pointer when processing + is suspended */ + + uint32_t CrypInCount_saved; /*!< copy of CRYP input data counter when processing + is suspended */ + + uint32_t CrypOutCount_saved; /*!< copy of CRYP output data counter when processing + is suspended */ + + uint32_t Phase_saved; /*!< copy of CRYP authentication phase when processing + is suspended */ + + __IO HAL_CRYP_STATETypeDef State_saved; /*!< copy of CRYP peripheral state when processing + is suspended */ + + uint32_t IV_saved[4]; /*!< copy of Initialisation Vector registers */ + + uint32_t SUSPxR_saved[16]; /*!< copy of suspension registers */ + + uint32_t CR_saved; /*!< copy of CRYP control register when processing + is suspended*/ + + uint32_t Key_saved[8]; /*!< copy of key registers */ + + uint16_t Size_saved; /*!< copy of input buffer size */ + + uint16_t CrypHeaderCount_saved; /*!< copy of CRYP header data counter when processing + is suspended */ + + uint32_t SizesSum_saved; /*!< copy of SizesSum when processing is suspended */ + + uint32_t ResumingFlag; /*!< resumption flag to bypass steps already carried out */ + + uint32_t SuspendedProcessing; /*< Report whether interruption or DMA-mode processing + was suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +} CRYP_HandleTypeDef; + + +/** + * @} + */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition + * @brief HAL CRYP Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x01U, /*!< CRYP Input FIFO transfer completed callback ID */ + HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Output FIFO transfer completed callback ID */ + HAL_CRYP_ERROR_CB_ID = 0x03U, /*!< CRYP Error callback ID */ + HAL_CRYP_MSPINIT_CB_ID = 0x04U, /*!< CRYP MspInit callback ID */ + HAL_CRYP_MSPDEINIT_CB_ID = 0x05U /*!< CRYP MspDeInit callback ID */ + +} HAL_CRYP_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition + * @brief HAL CRYP Callback pointer definition + * @{ + */ + +typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */ + +/** + * @} + */ + +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Constants CRYP Exported Constants + * @{ + */ + +/** @defgroup CRYP_Error_Definition CRYP Error Definition + * @{ + */ +#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */ +#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */ +#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */ +#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */ +#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ +#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */ +#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +#define HAL_CRYP_ERROR_KEY 0x00000100U /*!< Key error */ +#define HAL_CRYP_ERROR_RNG 0x00000200U /*!< RNG error */ + +/** + * @} + */ + + +/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit + * @{ + */ + +#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ +#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is byte */ + +/** + * @} + */ + +/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit + * @{ + */ + +#define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ +#define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is byte */ + +/** + * @} + */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** @defgroup SAES_CR_CHMOD SAES CHMOD Selection + * @{ + */ + +#define SAES_CR_CHMOD_AES_ECB ((uint32_t)0x00000000) +#define SAES_CR_CHMOD_AES_CBC (SAES_CR_CHMOD_0) +#define SAES_CR_CHMOD_AES_CTR (SAES_CR_CHMOD_1) +#define SAES_CR_CHMOD_AES_GCM (SAES_CR_CHMOD_0 | SAES_CR_CHMOD_1) +#define SAES_CR_CHMOD_AES_CCM (SAES_CR_CHMOD_2) + +/** + * @} + */ +#endif /* USE_HAL_SAES_ONLY */ + +/** @defgroup CRYP_CR_ALGOMODE CRYP Algorithm Mode + * @{ + */ + +#define CRYP_AES_ECB (CRYP_CR_ALGOMODE_2) +#define CRYP_AES_CBC (CRYP_CR_ALGOMODE_0 | CRYP_CR_ALGOMODE_2) +#define CRYP_AES_CTR (CRYP_CR_ALGOMODE_1 | CRYP_CR_ALGOMODE_2) +#define CRYP_AES_KEY (CRYP_CR_ALGOMODE_0 | CRYP_CR_ALGOMODE_1 | CRYP_CR_ALGOMODE_2) +#define CRYP_AES_GCM (CRYP_CR_ALGOMODE_3) +#define CRYP_AES_CCM (CRYP_CR_ALGOMODE_0 | CRYP_CR_ALGOMODE_3) + +/** + * @} + */ + +/** @defgroup CRYP_Key_Size CRYP Key Size + * @{ + */ + +#define CRYP_KEYSIZE_128B 0x00000000U +#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0 +#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1 + +/** + * @} + */ + +/** @defgroup CRYP_Data_Type CRYP Data Type + * @{ + */ + +#define CRYP_DATATYPE_32B 0x00000000U +#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0 +#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1 +#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE + +#define CRYP_NO_SWAP CRYP_DATATYPE_32B /*!< 32-bit data type (no swapping) */ +#define CRYP_HALFWORD_SWAP CRYP_DATATYPE_16B /*!< 16-bit data type (half-word swapping) */ +#define CRYP_BYTE_SWAP CRYP_DATATYPE_8B /*!< 8-bit data type (byte swapping) */ +#define CRYP_BIT_SWAP CRYP_DATATYPE_1B /*!< 1-bit data type (bit swapping) */ +/** + * @} + */ + +/** @defgroup CRYP_Interrupt CRYP and SAES peripherals interrupts + * @{ + */ + +#define CRYP_IT_INI CRYP_IMSCR_INIM /*!< CRYP peripheral input FIFO Interrupt */ +#define CRYP_IT_OUTI CRYP_IMSCR_OUTIM /*!< CRYP peripheral output FIFO Interrupt */ + +#define CRYP_IT_CCFIE SAES_IER_CCFIE /*!< SAES peripheral computation Complete interrupt enable */ +#define CRYP_IT_RWEIE SAES_IER_RWEIE /*!< SAES peripheral read or write Error interrupt enable */ +#define CRYP_IT_KEIE SAES_IER_KEIE /*!< SAES peripheral key error interrupt enable */ +#define CRYP_IT_RNGEIE SAES_IER_RNGEIE /*!< SAES peripheral RNG error interrupt enable */ + +/** + * @} + */ + +/** @defgroup CRYP_Flags CRYP & SAES Flags + * @{ + */ + +/* Flags in the SR register */ +#define CRYP_FLAG_IFEM CRYP_SR_IFEM /*!< CRYP peripheral Input FIFO is empty */ +#define CRYP_FLAG_IFNF CRYP_SR_IFNF /*!< CRYP peripheral Input FIFO is not Full */ +#define CRYP_FLAG_OFNE CRYP_SR_OFNE /*!< CRYP peripheral Output FIFO is not empty */ +#define CRYP_FLAG_OFFU CRYP_SR_OFFU /*!< CRYP peripheral Output FIFO is Full */ +#define CRYP_FLAG_KERF CRYP_SR_KERF /*!< CRYP peripheral Key error flag */ +/* Flags in the RISR register */ +#define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw interrupt status */ +#define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw interrupt status*/ + +#define CRYP_FLAG_BUSY CRYP_SR_BUSY /*!< The CRYP peripheral is currently processing a block of data + or a key preparation (for AES decryption). */ + + +#define CRYP_FLAG_KEYVALID CRYP_SR_KEYVALID /*!< CRYP or SAES peripheral Key valid flag */ + +#define SAES_FLAG_BUSY SAES_SR_BUSY /*!< The SAES peripheral is currently processing a block of data + or a key preparation (for AES decryption). */ + +#define CRYP_FLAG_WRERR (SAES_SR_WRERR | 0x80000000U) /*!< SAES peripheral Write Error flag */ +#define CRYP_FLAG_RDERR (SAES_SR_RDERR | 0x80000000U) /*!< SAES peripheral Read error flag */ +#define CRYP_FLAG_CCF SAES_SR_CCF /*!< SAES peripheral Computation completed flag + as AES_ISR_CCF */ +#define CRYP_FLAG_KEIF SAES_ISR_KEIF /*!< SAES peripheral Key error interrupt flag */ +#define CRYP_FLAG_RWEIF SAES_ISR_RWEIF /*!< SAES peripheral Read or Write error Interrupt flag */ +#define CRYP_FLAG_RNGEIF SAES_ISR_RNGEIF /*!< SAES peripheral RNG error Interrupt flag */ +/** + * @} + */ + +/** @defgroup CRYP_CLEAR_Flags SAES peripheral Clear Flags + * @{ + */ +#define CRYP_CLEAR_CCF SAES_ICR_CCF /*!< SAES peripheral clear Computation Complete Flag */ +#define CRYP_CLEAR_RWEIF SAES_ICR_RWEIF /*!< SAES peripheral clear Error Flag : RWEIF in SAES_ISR and + both RDERR and WRERR flags in SAES_SR */ +#define CRYP_CLEAR_KEIF SAES_ICR_KEIF /*!< SAES peripheral clear Key Error Flag: KEIF in SAES_ISR */ +#define CRYP_CLEAR_RNGEIF SAES_ICR_RNGEIF /*!< SAES peripheral clear RNG error Flag */ + +/** + * @} + */ + + +/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode + * @{ + */ + +#define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration + to do systematically */ +#define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration + to do only once */ +#define CRYP_KEYNOCONFIG 0x00000002U /*!< Peripheral Key configuration to not do */ + +/** + * @} + */ + +/** @defgroup CRYP_Key_Mode CRYP or SAES Key Mode + * @{ + */ + +#define CRYP_KEYMODE_NORMAL 0x00000000U /*!< Normal key usage, Key registers are freely usable */ +#define CRYP_KEYMODE_WRAPPED SAES_CR_KMOD_0 /*!< Only for SAES, Wrapped key: to encrypt + or decrypt AES keys */ +#define CRYP_KEYMODE_SHARED SAES_CR_KMOD_1 /*!< Key shared by SAES peripheral */ +/** + * @} + */ + +/** @defgroup CRYP_Key_Select SAES Key Select + * @{ + */ + +#define CRYP_KEYSEL_NORMAL 0x00000000U /*!< Normal key, key registers SAES_KEYx or CRYP_KEYx */ +#define CRYP_KEYSEL_HW SAES_CR_KEYSEL_0 /*!< Only for SAES, Hardware key : derived hardware + unique key (DHUK 256-bit) */ +#define CRYP_KEYSEL_SW SAES_CR_KEYSEL_1 /*!< Only for SAES, Software key : boot hardware + key BHK (256-bit) */ +#define CRYP_KEYSEL_HSW SAES_CR_KEYSEL_2 /*!< Only for SAES, DHUK XOR BHK Hardware unique + key XOR software key */ +#define CRYP_KEYSEL_AHK (SAES_CR_KEYSEL_1|SAES_CR_KEYSEL_0) /*!< Only for SAES, Software key : + application hardware key AHK (128- or 256-bit) */ +#define CRYP_KEYSEL_DUK_AHK (SAES_CR_KEYSEL_2|SAES_CR_KEYSEL_0) /*!< Only for SAES, DHUK XOR AHK */ +#define CRYP_KEYSEL_TEST_KEY (SAES_CR_KEYSEL_2|SAES_CR_KEYSEL_1|SAES_CR_KEYSEL_0) /*!< Test mode key (256-bit + hardware constant key 0xA5A5...A5A5) */ +/** + * @} + */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** + * @} + */ + +/** @defgroup CRYP_Key_Shared SAES Key Shared with Peripheral + * @{ + */ + +#define CRYP_KEYSHARED_CRYP 0x00000000U /*!< Only for SAES, key is shared with CRYP peripheral */ + +/** + * @} + */ + +/** @defgroup CRYP_Mode SAES processing mode + * @{ + */ + +#define CRYP_MODE_ENCRYPT 0x00000000U /*!< SAES peripheral encryption mode */ +#define CRYP_MODE_KEY_DERIVATION SAES_CR_MODE_0 /*!< SAES peripheral key derivation */ +#define CRYP_MODE_DECRYPT SAES_CR_MODE_1 /*!< SAES peripheral decryption mode */ + +/** + * @} + */ +#endif /* USE_HAL_SAES_ONLY */ + +/** @defgroup CRYP_Mode SAES processing mode + * @{ + */ + +#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< CRYP peripheral encryption mode */ +#define CRYP_OPERATINGMODE_DECRYPT CRYP_CR_ALGODIR /*!< CRYP peripheral decryption mode */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Macros CRYP Exported Macros + * @{ + */ + +/** + * @brief Inform about which IP is the current INSTANCE: CRYP or SAES. + * @param INSTANCE: specifies the HW instance. + * @retval None + */ +#define IS_CRYP_INSTANCE(INSTANCE) ((INSTANCE) == CRYP) +#define IS_SAES_INSTANCE(INSTANCE) ((INSTANCE) == SAES) + +/** @brief Reset CRYP handle state + * @param __HANDLE__ specifies the CRYP handle. + * @retval None + */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET) +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @brief Enable/Disable the CRYP or SAES peripheral. + * @param __HANDLE__: specifies the CRYP handle. + * @retval None + */ + +#define __HAL_CRYP_ENABLE(__HANDLE__) ((IS_CRYP_INSTANCE((__HANDLE__)->Instance)) ? \ + (((CRYP_TypeDef *)((__HANDLE__)->Instance))->CR |= CRYP_CR_CRYPEN) :\ + (((SAES_TypeDef *)((__HANDLE__)->Instance))->CR |= SAES_CR_EN)) + +#define __HAL_CRYP_DISABLE(__HANDLE__) ((IS_CRYP_INSTANCE((__HANDLE__)->Instance)) ? \ + (((CRYP_TypeDef *)((__HANDLE__)->Instance))->CR &= ~CRYP_CR_CRYPEN) :\ + (((SAES_TypeDef *)((__HANDLE__)->Instance))->CR &= ~SAES_CR_EN)) + +/** @brief Check whether the specified CRYP or SAES peripheral status flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data + * or a key preparation (for AES decryption) + * @arg @ref CRYP_FLAG_KEYVALID Key valid flag + * @arg @ref CRYP_FLAG_KEIF Key error flag + * @arg CRYP_FLAG_IFEM: Input FIFO is empty (CRYP peripheral only) + * @arg CRYP_FLAG_IFNF: Input FIFO is not full (CRYP peripheral only) + * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending (CRYP peripheral only) + * @arg CRYP_FLAG_OFNE: Output FIFO is not empty (CRYP peripheral only) + * @arg CRYP_FLAG_OFFU: Output FIFO is full (CRYP peripheral only) + * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending (CRYP peripheral only) + * @arg @ref CRYP_FLAG_WRERR Write Error flag (SAES peripheral only) + * @arg @ref CRYP_FLAG_RDERR Read Error flag (SAES peripheral only) + * @arg @ref CRYP_FLAG_CCF Computation Complete flag (SAES peripheral only) + * @arg @ref CRYP_FLAG_RWEIF Read/write Error flag (SAES peripheral only) + * @arg @ref CRYP_FLAG_RNGEIF RNG Error flag (SAES peripheral only) + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define CRYP_FLAG_MASK 0x0000001FU + +#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((IS_CRYP_INSTANCE((__HANDLE__)->Instance)) ?\ + ((__FLAG__) == CRYP_FLAG_KEYVALID )?((((((CRYP_TypeDef *) \ + ((__HANDLE__)->Instance))))->SR \ + & (CRYP_FLAG_KEYVALID)) == (CRYP_FLAG_KEYVALID)) : \ + ((__FLAG__) == CRYP_FLAG_BUSY )?((((((CRYP_TypeDef *) \ + ((__HANDLE__)->Instance))))->SR \ + & (CRYP_FLAG_BUSY)) == (CRYP_FLAG_BUSY)) : \ + ((__FLAG__) == CRYP_FLAG_KEIF )?((((((CRYP_TypeDef *) \ + ((__HANDLE__)->Instance))))->SR \ + & (CRYP_FLAG_KERF)) == (CRYP_FLAG_KERF)) : \ + ((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?(((((CRYP_TypeDef *) \ + ((__HANDLE__)->Instance))->RISR) & ((__FLAG__) & \ + CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \ + (((((CRYP_TypeDef *)((__HANDLE__)->Instance))->RISR) & ((__FLAG__)\ + & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK))) :\ + (\ + ((__FLAG__) == CRYP_FLAG_KEYVALID )?((((SAES_TypeDef *)\ + (((SAES_TypeDef *)((__HANDLE__)->Instance))))->SR \ + & (CRYP_FLAG_KEYVALID)) == (CRYP_FLAG_KEYVALID)) : \ + ((__FLAG__) == CRYP_FLAG_BUSY )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->SR \ + & (CRYP_FLAG_BUSY)) == (CRYP_FLAG_BUSY)) : \ + ((__FLAG__) == CRYP_FLAG_WRERR )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->SR \ + & (CRYP_FLAG_WRERR & 0x7FFFFFFFU)) == \ + (CRYP_FLAG_WRERR & 0x7FFFFFFFU)) : \ + ((__FLAG__) == CRYP_FLAG_RDERR )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->SR \ + & (CRYP_FLAG_RDERR & 0x7FFFFFFFU)) == \ + (CRYP_FLAG_RDERR & 0x7FFFFFFFU)) : \ + ((__FLAG__) == CRYP_FLAG_RNGEIF )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->ISR \ + & (CRYP_FLAG_RNGEIF)) == (CRYP_FLAG_RNGEIF)) : \ + ((__FLAG__) == CRYP_FLAG_KEIF )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->ISR \ + & (CRYP_FLAG_KEIF)) == (CRYP_FLAG_KEIF)) : \ + ((__FLAG__) == CRYP_FLAG_RWEIF )?((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->ISR \ + & (CRYP_FLAG_RWEIF)) == (CRYP_FLAG_RWEIF)) : \ + ((((SAES_TypeDef *)((__HANDLE__)->Instance))->ISR & \ + (CRYP_FLAG_CCF)) == (CRYP_FLAG_CCF)))) + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** @brief Clear the SAES peripheral pending status flag. + * @param __HANDLE__ specifies the SAES handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref CRYP_CLEAR_RWEIF Read (RDERR), Write (WRERR) or Read/write (RWEIF) Error Flag Clear + * @arg @ref CRYP_CLEAR_CCF Computation Complete Flag (CCF) Clear + * @arg @ref CRYP_CLEAR_KEIF Key error interrupt flag clear + * @arg @ref CRYP_CLEAR_RNGEIF RNG error interrupt flag clear + * @retval None + */ +#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG(((SAES_TypeDef *)((__HANDLE__)->Instance))->ICR,\ + (__FLAG__)) +#endif /* USE_HAL_SAES_ONLY */ + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +/** @brief Check whether the specified CRYP peripheral interrupt is set or not. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: specifies the interrupt to check. + * This parameter can be one of the following values: + * @arg CRYP_IT_INI: Input FIFO service masked interrupt status + * @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) ((((CRYP_TypeDef *)((__HANDLE__)->Instance))->MISR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) +#endif /* USE_HAL_CRYP_ONLY */ + +/** + * @brief Enable the CRYP or SAES peripheral interrupt. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: Interrupt. + * This parameter can be one of the following values: + * @arg @ref CRYP_IT_INI Input FIFO service interrupt mask (CRYP peripheral only) + * @arg @ref CRYP_IT_OUTI Output FIFO service interrupt mask (CRYP peripheral only) + * @arg @ref CRYP_IT_RWEIE Error interrupt (used for RDERR and WRERR) (SAES peripheral only) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt (SAES peripheral only) + * @arg @ref CRYP_IT_KEIE Key error interrupt (SAES peripheral only) + * @arg @ref CRYP_IT_RNGEIE RNG interrupt (SAES peripheral only) + * @retval None + */ + +#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_CRYP_INSTANCE((__HANDLE__)->Instance)) ?\ + ((((CRYP_TypeDef *)((__HANDLE__)->Instance))->IMSCR) |= \ + (__INTERRUPT__)) : ((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->IER) |= (__INTERRUPT__))) + +/** + * @brief Disable the CRYP or SAES peripheral interrupt. + * @param __HANDLE__: specifies the CRYP handle. + * @param __INTERRUPT__: Interrupt. + * This parameter can be one of the following values: + * @arg @ref CRYP_IT_INI Input FIFO service interrupt mask (CRYP peripheral only) + * @arg @ref CRYP_IT_OUTI Output FIFO service interrupt mask (CRYP peripheral only) + * @arg @ref CRYP_IT_RWEIE Error interrupt (used for RDERR and WRERR) (SAES peripheral only) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt (SAES peripheral only) + * @arg @ref CRYP_IT_KEIE Key error interrupt (SAES peripheral only) + * @arg @ref CRYP_IT_RNGEIE RNG interrupt (SAES peripheral only) + * @retval None + */ + +#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_CRYP_INSTANCE((__HANDLE__)->Instance)) ?\ + ((((CRYP_TypeDef *)((__HANDLE__)->Instance))->IMSCR) &= \ + ~(__INTERRUPT__)) : ((((SAES_TypeDef *) \ + ((__HANDLE__)->Instance))->IER) &= ~(__INTERRUPT__))) + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** @brief Check whether the specified SAES peripheral interrupt source is enabled or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ interrupt source to check + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_RWEIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * @arg @ref CRYP_IT_KEIE Key error interrupt + * @arg @ref CRYP_IT_RNGEIE RNG error interrupt + * @retval State of interruption (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((SAES_TypeDef *)((__HANDLE__)->Instance))->IER\ + & (__INTERRUPT__)) == (__INTERRUPT__)) +#endif /* USE_HAL_SAES_ONLY */ +/** + * @} + */ + +/* Include CRYP HAL Extended module */ +#include "stm32h7rsxx_hal_cryp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Functions CRYP Exported Functions + * @{ + */ + +/** @addtogroup CRYP_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, + pCRYP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_DMAProcessSuspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp); +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group2 + * @{ + */ + +/* encryption/decryption ***********************************/ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); + +/** + * @} + */ + + +/** @addtogroup CRYP_Exported_Functions_Group3 + * @{ + */ +/* Interrupt Handler functions **********************************************/ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(const CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); +uint32_t HAL_CRYP_GetError(const CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRYP_Private_Macros CRYP Private Macros + * @{ + */ + +/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters + * @{ + */ + +#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \ + ((ALGORITHM) == CRYP_AES_CBC) || \ + ((ALGORITHM) == CRYP_AES_CTR) || \ + ((ALGORITHM) == CRYP_AES_GCM) || \ + ((ALGORITHM) == CRYP_AES_CCM)) + +#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_192B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_256B)) + +#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \ + ((DATATYPE) == CRYP_DATATYPE_16B) || \ + ((DATATYPE) == CRYP_DATATYPE_8B) || \ + ((DATATYPE) == CRYP_DATATYPE_1B)) + +#define IS_CRYP_INIT(CONFIG) (((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ + ((CONFIG) == CRYP_KEYIVCONFIG_ONCE) || \ + ((CONFIG) == CRYP_KEYNOCONFIG)) + +#define IS_CRYP_KEYIVCONFIG(CONFIG) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_192B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_256B)) + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +#define IS_CRYP_KEYMODE(MODE) (((MODE) == CRYP_KEYMODE_NORMAL) || \ + ((MODE) == CRYP_KEYMODE_SHARED)) + +#define IS_SAES_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \ + ((ALGORITHM) == CRYP_AES_CBC) || \ + ((ALGORITHM) == CRYP_AES_CTR) || \ + ((ALGORITHM) == CRYP_AES_GCM) || \ + ((ALGORITHM) == CRYP_AES_CCM)) + +#define IS_SAES_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_256B)) + +#define IS_SAES_DATATYPE(DATATYPE) (((DATATYPE) == SAES_DATATYPE_32B) || \ + ((DATATYPE) == SAES_DATATYPE_16B) || \ + ((DATATYPE) == SAES_DATATYPE_8B) || \ + ((DATATYPE) == SAES_DATATYPE_1B)) + +#define IS_SAES_KEYMODE(MODE) (((MODE) == CRYP_KEYMODE_NORMAL) || \ + ((MODE) == CRYP_KEYMODE_WRAPPED) || \ + ((MODE) == CRYP_KEYMODE_SHARED)) + +#define IS_SAES_KEYPROT(PROTECTION) (((PROTECTION) == CRYP_KEYPROT_ENABLE) || \ + ((PROTECTION) == CRYP_KEYPROT_DISABLE)) + +#define IS_SAES_KEYSEL(SELECTION) (((SELECTION) == CRYP_KEYSEL_NORMAL) || \ + ((SELECTION) == CRYP_KEYSEL_HW) || \ + ((SELECTION) == CRYP_KEYSEL_SW) || \ + ((SELECTION) == CRYP_KEYSEL_HSW) || \ + ((SELECTION) == CRYP_KEYSEL_AHK) || \ + ((SELECTION) == CRYP_KEYSEL_DUK_AHK) || \ + ((SELECTION) == CRYP_KEYSEL_TEST_KEY)) + +#define IS_SAES_KEYSHARED(PERIPHERAL) ((PERIPHERAL) == CRYP_KEYSHARED_CRYP) +/** + * @} + */ +#endif /* USE_HAL_SAES_ONLY */ + +/** @defgroup SAES_CONV_Definitions SAES Private macros to convert input parameters from CRYP peripheral to + SAES peripheral format + * @{ + */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +#define SAES_CONV_DATATYPE(__DATATYPE__) ((__DATATYPE__) >> (CRYP_CR_DATATYPE_Pos - SAES_CR_DATATYPE_Pos)) + +#define SAES_CONV_KEYSIZE(__KEY__) (((__KEY__)\ + & CRYP_CR_KEYSIZE_1) << (SAES_CR_KEYSIZE_Pos - (CRYP_CR_KEYSIZE_Pos + 1U))) + +#define SAES_CONV_ALGO(__ALGO__) (((__ALGO__)\ + & (CRYP_CR_ALGOMODE_1 | CRYP_CR_ALGOMODE_0)) << (SAES_CR_CHMOD_Pos - \ + CRYP_CR_ALGOMODE_Pos)) +#endif /* USE_HAL_SAES_ONLY */ +#define CRYP_CONV_ALGODIR(__ALGODIR__) (((__ALGODIR__)\ + & SAES_CR_MODE_1) >> ((SAES_CR_MODE_Pos + 1U) - CRYP_CR_ALGODIR_Pos)) + +/** + * @} + */ + + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Constants CRYP Private Constants + * @{ + */ + +/** + * @} + */ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup CRYP_Private_Defines CRYP Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Variables CRYP Private Variables + * @{ + */ + +/** + * @} + */ +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup CRYP_Private_Functions_Prototypes CRYP Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Functions CRYP Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* CRYP */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +/** + * @} + */ + +#endif /* STM32H7RSxx_HAL_CRYP_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp_ex.h new file mode 100644 index 000000000..a495c4dcd --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_cryp_ex.h @@ -0,0 +1,129 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cryp_ex.h + * @author MCD Application Team + * @brief Header file of CRYP HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CRYP_EX_H +#define STM32H7RSxx_HAL_CRYP_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (CRYP) +/** @addtogroup CRYPEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Types CRYPEx Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions + * @{ + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, const uint32_t *pAuthTag, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, const uint32_t *pAuthTag, + uint32_t Timeout); +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +HAL_StatusTypeDef HAL_CRYPEx_EncryptSharedKey(CRYP_HandleTypeDef *hcryp, uint32_t *Key, uint32_t *Output, + uint32_t ID, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_DecryptSharedKey(CRYP_HandleTypeDef *hcryp, uint32_t *Key, uint32_t ID, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_UnwrapKey(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_WrapKey(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t *Output, uint32_t Timeout); +#endif /* USE_HAL_SAES_ONLY */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* CRYP */ +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CRYP_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dcmipp.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dcmipp.h new file mode 100644 index 000000000..72402fb34 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dcmipp.h @@ -0,0 +1,948 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_dcmipp.h + * @author MCD Application Team + * @brief Header file of DCMIPP HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7RSxx_HAL_DCMIPP_H +#define __STM32H7RSxx_HAL_DCMIPP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (DCMIPP) + +/** @addtogroup DCMIPP DCMIPP + * @brief DCMIPP HAL module driver + * @{ + */ + +/* Exported types ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DCMIPP_Exported_Types DCMIPP Exported Types + * @brief DCMIPP Exported Types + * @{ + */ +/** + * @brief DCMIPP Embedded Synchronisation Unmask codes structure definition + */ +typedef struct +{ + uint8_t FrameStartUnmask; /*!< Specifies the frame start delimiter unmask. */ + uint8_t LineStartUnmask; /*!< Specifies the line start delimiter unmask. */ + uint8_t LineEndUnmask; /*!< Specifies the line end delimiter unmask. */ + uint8_t FrameEndUnmask; /*!< Specifies the frame end delimiter unmask. */ +} DCMIPP_EmbeddedSyncUnmaskTypeDef; + +/** + * @brief DCMIPP Embedded Synchronisation codes structure definition (CCIR656) + */ +typedef struct +{ + uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ + uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ + uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ + uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ +} DCMIPP_EmbeddedSyncCodesTypeDef; + + +/** + * @brief HAL DCMIPP Parallel configuration structure definition + */ +typedef struct +{ + uint32_t Format; /*!< Configures the DCMIPP Format + This parameter can be one value of @ref DCMIPP_Format */ + uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. + This parameter can be a value of @ref DCMIPP_VSYNC_Polarity */ + uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. + This parameter can be a value of @ref DCMIPP_HSYNC_Polarity */ + uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. + This parameter can be a value of @ref DCMIPP_PIXCK_Polarity */ + uint32_t ExtendedDataMode ; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit 14-bit or 16-bits. + This parameter can be a value of @ref DCMIPP_Extended_Data_Mode */ + uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. + This parameter can be a value of @ref DCMIPP_Synchronization_Mode */ + DCMIPP_EmbeddedSyncCodesTypeDef SynchroCodes; /*!< Specifies the code of the line/frame start delimiter and the + line/frame end delimiter */ + uint32_t SwapBits; /*!< Enable or Disable the Swap Bits. + This parameter can be a value of @ref DCMIPP_SWAP_BITS */ + uint32_t SwapCycles; /*!< Enable or Disable the Swap Cycles. + This parameter can be a value of @ref DCMIPP_SWAP_CYCLES */ +} DCMIPP_ParallelConfTypeDef; + +/** + * @brief HAL DCMIPP Pipe configuration structure definition + */ +typedef struct +{ + uint32_t FrameRate; /*!< Configures the DCMIPP Pipe Frame Rate + This parameter can be one value of @ref DCMIPP_Frame_Rates */ +} DCMIPP_PipeConfTypeDef; + +/** + * @brief HAL DCMIPP IPPLUG configuration structure definition + */ +typedef struct +{ + uint32_t Client; /*!< Configures the DCMIPP IPPLUG Client + This parameter can be a value from @ref DCMIPP_IPPLUG_Client */ + uint32_t MemoryPageSize; /*!< Configures the DCMIPP IPPLUG Memory page size + This parameter can be a value from @ref DCMIPP_Memory_Page_Size */ + uint32_t Traffic; /*!< Configures the DCMIPP IPPLUG Traffic + This parameter can be a value from @ref DCMIPP_Traffic_Burst_Size */ + uint32_t MaxOutstandingTransactions ; /*!< Configures the DCMIPP IPPLUG Maximum outstanding transactions + This parameter can be a value from + DCMIPP_Maximum_Outstanding_Transactions */ + uint32_t DPREGStart; /*!< Configures the End word of the FIFO of Clientx + This parameter can be a value between 0 and 0x3FF */ + uint32_t DPREGEnd; /*!< Configures the Start word of the FIFO of Clientx + This parameter can be a value between 0 and 0x3FF */ + uint32_t WLRURatio; /*!< Configures the DCMIPP Ratio for WLRU arbitration + This parameter can be a value between 0 and 15 */ +} DCMIPP_IPPlugConfTypeDef; + +/** + * @brief HAL DCMIPP Crop configuration structure definition + */ +typedef struct +{ + uint32_t VStart; /*!< Configures the DCMIPP Crop Vertical Start + This parameter can be one value between 0 and 4095 */ + uint32_t HStart; /*!< Configures the DCMIPP Crop Horizontal Start + This parameter can be one value between 0 and 4095 */ + uint32_t VSize; /*!< Configures the DCMIPP Crop Vertical Size + This parameter can be one value between 0 and 4095 */ + uint32_t HSize; /*!< Configures the DCMIPP Crop Horizontal Size + This parameter can be one value between 1 and 4095 */ + uint32_t PipeArea; /*!< Configures the DCMIPP Crop Area for the pipe0 + This parameter can be one value of @ref DCMIPP_Crop_Area */ +} DCMIPP_CropConfTypeDef; + + +/** + * @brief HAL DCMIPP State enumeration definition + */ +typedef enum +{ + HAL_DCMIPP_STATE_RESET = 0x00U, /*!< DCMIPP not yet initialized or disabled */ + HAL_DCMIPP_STATE_INIT = 0x01U, /*!< DCMIPP initialized */ + HAL_DCMIPP_STATE_READY = 0x02U, /*!< DCMIPP configured and ready for use */ + HAL_DCMIPP_STATE_BUSY = 0x03U, /*!< DCMIPP internal processing is ongoing */ + HAL_DCMIPP_STATE_ERROR = 0x04U, /*!< DCMIPP state error */ +} HAL_DCMIPP_StateTypeDef; + +/** + * @brief HAL DCMIPP Pipe State enumeration definition + */ + +typedef enum +{ + HAL_DCMIPP_PIPE_STATE_RESET = 0x00U, /*!< DCMIPP Pipe not yet initialized or disabled */ + HAL_DCMIPP_PIPE_STATE_READY = 0x01U, /*!< DCMIPP Pipe initialized and ready for use */ + HAL_DCMIPP_PIPE_STATE_BUSY = 0x02U, /*!< DCMIPP internal processing is ongoing */ + HAL_DCMIPP_PIPE_STATE_SUSPEND = 0x03U, /*!< DCMIPP pipe process is suspended */ + HAL_DCMIPP_PIPE_STATE_ERROR = 0x04U, /*!< DCMIPP pipe error state */ +} HAL_DCMIPP_PipeStateTypeDef; + +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DCMIPP common Callback ID enumeration definition + */ +typedef enum +{ + HAL_DCMIPP_MSPINIT_CB_ID = 0x00U, /*!< DCMIPP MspInit callback ID */ + HAL_DCMIPP_MSPDEINIT_CB_ID = 0x01U, /*!< DCMIPP MspDeInit callback ID */ + HAL_DCMIPP_ERROR_CB_ID = 0x02U, /*!< DCMIPP Error callback ID */ +} HAL_DCMIPP_CallbackIDTypeDef; + +/** + * @brief HAL DCMIPP pipe Callback ID enumeration definition + */ +typedef enum +{ + HAL_DCMIPP_PIPE_LIMIT_EVENT_CB_ID = 0x01U, /*!< DCMIPP Pipe Limit event callback ID */ + HAL_DCMIPP_PIPE_LINE_EVENT_CB_ID = 0x02U, /*!< DCMIPP Pipe Line event callback ID */ + HAL_DCMIPP_PIPE_FRAME_EVENT_CB_ID = 0x03U, /*!< DCMIPP Pipe Frame event callback ID */ + HAL_DCMIPP_PIPE_VSYNC_EVENT_CB_ID = 0x04U, /*!< DCMIPP Pipe Vsync event callback ID */ + HAL_DCMIPP_PIPE_ERROR_CB_ID = 0x05U, /*!< DCMIPP Pipe Error callback ID */ +} HAL_DCMIPP_PIPE_CallbackIDTypeDef; +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + +/** + * @brief HAL DCMIPP handle structures definition + */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +typedef struct __DCMIPP_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ +{ + DCMIPP_TypeDef *Instance; /*!< Register the DCMIPP base + address */ + __IO HAL_DCMIPP_StateTypeDef State; /*!< DCMIPP state */ + __IO HAL_DCMIPP_PipeStateTypeDef PipeState[DCMIPP_NUM_OF_PIPES]; /*!< DCMIPP Pipes state */ + __IO uint32_t ErrorCode; /*!< DCMIPP Error code */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + void (* PIPE_FrameEventCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< DCMIPP Pipe Frame Event + Callback */ + void (* PIPE_VsyncEventCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< DCMIPP Pipe Vsync Event + Callback */ + void (* PIPE_LineEventCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< DCMIPP Pipe Line Event + Callback */ + void (* PIPE_LimitEventCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< DCMIPP Pipe Limit Event + Callback */ + void (* PIPE_ErrorCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< DCMIPP Pipe Error + Callback */ + void (* ErrorCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp); /*!< DCMIPP Error Callback */ + void (* MspInitCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp); /*!< DCMIPP Msp Init + Callback */ + void (* MspDeInitCallback)(struct __DCMIPP_HandleTypeDef *hdcmipp); /*!< DCMIPP Msp DeInit + Callback */ +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ +} DCMIPP_HandleTypeDef; + +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DCMIPP Callback pointer definition + */ +typedef void (*pDCMIPP_CallbackTypeDef)(DCMIPP_HandleTypeDef *hdcmipp); /*!< Pointer to a DCMIPP common callback + function */ +typedef void (*pDCMIPP_PIPE_CallbackTypeDef)(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); /*!< Pointer to a DCMIPP + Pipe callback function */ +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DCMIPP_Exported_Constants DCMIPP Exported Constants + * @brief DCMIPP Exported constants + * @{ + */ + +/** @defgroup DCMIPP_Pipes DCMIPP Pipes + * @{ + */ +#define DCMIPP_PIPE0 0U /*!< DCMIPP Pipe0 (Dump pipe) */ +/** + * @} + */ + +/** @defgroup DCMIPP_Error_Codes DCMIPP Error Codes + * @{ + */ +#define HAL_DCMIPP_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_DCMIPP_ERROR_AXI_TRANSFER (0x00000001U) /*!< IPPLUG AXI Transfer error */ +#define HAL_DCMIPP_ERROR_PARALLEL_SYNC (0x00000002U) /*!< Synchronization error */ +#define HAL_DCMIPP_ERROR_PIPE0_LIMIT (0x00000004U) /*!< Limit error on pipe0 */ +#define HAL_DCMIPP_ERROR_PIPE0_OVR (0x00000008U) /*!< Overrun error on pipe0 */ + +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +#define HAL_DCMIPP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup DCMIPP_Capture_Mode DCMIPP Capture Mode + * @{ + */ +#define DCMIPP_MODE_CONTINUOUS 0U /*!< DCMIPP continuous mode (preview) */ +#define DCMIPP_MODE_SNAPSHOT DCMIPP_P0FCTCR_CPTMODE /*!< DCMIPP snapshot mode */ +/** + * @} + */ + + +/** @defgroup DCMIPP_IPPLUG_Client DCMIPP IPPLUG Client + * @{ + */ +#define DCMIPP_CLIENT1 1U /*!< Client 1 identifier */ +/** + * @} + */ + +/** @defgroup DCMIPP_Traffic_Burst_Size DCMIPP Traffic Burst Size + * @{ + */ +#define DCMIPP_TRAFFIC_BURST_SIZE_8BYTES 0U /*!< Traffic Burst size 8 Bytes */ +#define DCMIPP_TRAFFIC_BURST_SIZE_16BYTES (0x01U << DCMIPP_IPC1R1_TRAFFIC_Pos) /*!< Traffic Burst size 16 Bytes */ +#define DCMIPP_TRAFFIC_BURST_SIZE_32BYTES (0x02U << DCMIPP_IPC1R1_TRAFFIC_Pos) /*!< Traffic Burst size 32 Bytes */ +#define DCMIPP_TRAFFIC_BURST_SIZE_64BYTES (0x03U << DCMIPP_IPC1R1_TRAFFIC_Pos) /*!< Traffic Burst size 64 Bytes */ +#define DCMIPP_TRAFFIC_BURST_SIZE_128BYTES (0x04U << DCMIPP_IPC1R1_TRAFFIC_Pos) /*!< Traffic Burst size 128 Bytes */ +/** + * @} + */ + +/** @defgroup DCMIPP_Memory_Page_Size DCMIPP Memory Page Size + * @{ + */ +#define DCMIPP_MEMORY_PAGE_SIZE_64BYTES 0U /*!< Memory Page size 64 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_128BYTES (0x01U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 128 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_256BYTES (0x02U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 256 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_512BYTES (0x03U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 512 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_1KBYTES (0x04U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 1 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_2KBYTES (0x05U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 2 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_4KBYTES (0x06U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 4 Bytes */ +#define DCMIPP_MEMORY_PAGE_SIZE_8KBYTES (0x07U << DCMIPP_IPGR1_MEMORYPAGE_Pos) /*!< Memory Page size 8 Bytes */ +/** + * @} + */ +/** @defgroup DCMIPP_Maximum_Outstanding_Transactions DCMIPP Maximum Outstanding Transactions + * @{ + */ +#define DCMIPP_OUTSTANDING_TRANSACTION_NONE 0U /*!< Nooutstanding transaction limitation*/ +#define DCMIPP_OUTSTANDING_TRANSACTION_2 (0x01U << DCMIPP_IPC1R1_OTR_Pos) /*!< Two outstanding transactions */ +#define DCMIPP_OUTSTANDING_TRANSACTION_3 (0x02U << DCMIPP_IPC1R1_OTR_Pos) /*!< Three outstanding transactions */ +#define DCMIPP_OUTSTANDING_TRANSACTION_4 (0x03U << DCMIPP_IPC1R1_OTR_Pos) /*!< Four outstanding transactions */ +/** + * @} + */ + +/** @defgroup DCMIPP_Frame_Rates DCMIPP Frame Rates + * @{ + */ +#define DCMIPP_FRAME_RATE_ALL 0U /*!< All frames captured */ +#define DCMIPP_FRAME_RATE_1_OVER_2 (1U << DCMIPP_P0FCTCR_FRATE_Pos) /*!< 1 frame over 2 captured */ +#define DCMIPP_FRAME_RATE_1_OVER_4 (2U << DCMIPP_P0FCTCR_FRATE_Pos) /*!< 1 frame over 4 captured */ +#define DCMIPP_FRAME_RATE_1_OVER_8 (3U << DCMIPP_P0FCTCR_FRATE_Pos) /*!< 1 frame over 8 captured */ +/** + * @} + */ + +/** @defgroup DCMIPP_Crop_Area DCMIPP Crop Area + * @{ + */ +#define DCMIPP_POSITIVE_AREA 0U /*!< Positive Area chosen for crop */ +#define DCMIPP_NEGATIVE_AREA DCMIPP_P0SCSZR_POSNEG /*!< Negative Area chosen for crop */ +/** + * @} + */ + + + +/** @defgroup DCMIPP_Format DCMIPP Format + * @{ + */ +#define DCMIPP_FORMAT_BYTE 0U /*!< DCMIPP Format BYTE */ +#define DCMIPP_FORMAT_YUV422 (0x1EU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format YUV422 */ +#define DCMIPP_FORMAT_RGB565 (0x22U << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RGB565 */ +#define DCMIPP_FORMAT_RGB666 (0x23U << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RGB666 */ +#define DCMIPP_FORMAT_RGB888 (0x24U << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RGB888 */ +#define DCMIPP_FORMAT_RAW8 (0x2AU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RAW8 */ +#define DCMIPP_FORMAT_RAW10 (0x2BU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RAW10 */ +#define DCMIPP_FORMAT_RAW12 (0x2CU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RAW12 */ +#define DCMIPP_FORMAT_RAW14 (0x2DU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format RAW14 */ +#define DCMIPP_FORMAT_MONOCHROME_8B (0x4AU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format 8-bits */ +#define DCMIPP_FORMAT_MONOCHROME_10B (0x4BU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format 10-bits */ +#define DCMIPP_FORMAT_MONOCHROME_12B (0x4CU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format 12-bits */ +#define DCMIPP_FORMAT_MONOCHROME_14B (0x4DU << DCMIPP_PRCR_FORMAT_Pos) /*!< DCMIPP Format 14-bits */ +/** + * @} + */ + +/** @defgroup DCMIPP_Extended_Data_Mode DCMIPP Extended Data Mode + * @{ + */ +#define DCMIPP_INTERFACE_8BITS 0U /*!< Interface captures 8bits on every pixel clock */ +#define DCMIPP_INTERFACE_10BITS (1U << DCMIPP_PRCR_EDM_Pos) /*!< Interface captures 10bits on every pixel clock */ +#define DCMIPP_INTERFACE_12BITS (2U << DCMIPP_PRCR_EDM_Pos) /*!< Interface captures 12bits on every pixel clock */ +#define DCMIPP_INTERFACE_14BITS (3U << DCMIPP_PRCR_EDM_Pos) /*!< Interface captures 14bits on every pixel clock */ +#define DCMIPP_INTERFACE_16BITS (4U << DCMIPP_PRCR_EDM_Pos) /*!< Interface captures 16bits on every pixel clock */ +/** + * @} + */ + +/** @defgroup DCMIPP_HSYNC_Polarity DCMIPP HSYNC Polarity + * @{ + */ +#define DCMIPP_HSPOLARITY_LOW 0U /*!< Horizontal synchronization active Low */ +#define DCMIPP_HSPOLARITY_HIGH DCMIPP_PRCR_HSPOL /*!< Horizontal synchronization active High */ +/** + * @} + */ +/** @defgroup DCMIPP_VSYNC_Polarity DCMIPP VSYNC Polarity + * @{ + */ +#define DCMIPP_VSPOLARITY_LOW 0U /*!< Vertical synchronization active Low */ +#define DCMIPP_VSPOLARITY_HIGH DCMIPP_PRCR_VSPOL /*!< Vertical synchronization active High */ +/** + * @} + */ +/** @defgroup DCMIPP_PIXCK_Polarity DCMIPP PIXCK Polarity + * @{ + */ +#define DCMIPP_PCKPOLARITY_FALLING 0U /*!< Pixel clock active on Falling edge */ +#define DCMIPP_PCKPOLARITY_RISING DCMIPP_PRCR_PCKPOL /*!< Pixel clock active on Rising edge */ +/** + * @} + */ + +/** @defgroup DCMIPP_Synchronization_Mode DCMIPP Synchronization Mode + * @{ + */ +#define DCMIPP_SYNCHRO_HARDWARE 0U /*!< Hardware Synchronization */ +#define DCMIPP_SYNCHRO_EMBEDDED DCMIPP_PRCR_ESS /*!< Embedded Synchronization */ +/** + * @} + */ + +/** @defgroup DCMIPP_SWAP_CYCLES DCMIPP Swap Cycles + * @{ + */ +#define DCMIPP_SWAPCYCLES_DISABLE 0U /*!< swap data from cycle 0 vs cycle 1 */ +#define DCMIPP_SWAPCYCLES_ENABLE (DCMIPP_PRCR_SWAPCYCLES) /*!< swap data from cycle 0 vs cycle 1 */ +/** + * @} + */ + +/** @defgroup DCMIPP_SWAP_BITS DCMIPP Swap Bits + * @{ + */ +#define DCMIPP_SWAPBITS_DISABLE 0U /*!< swap lsb vs msb within each received component */ +#define DCMIPP_SWAPBITS_ENABLE (DCMIPP_PRCR_SWAPBITS) /*!< swap lsb vs msb within each received component */ +/** + * @} + */ + +/** @defgroup DCMIPP_Pipe_Line_Decimation DCMIPP Pipe Line Decimation + * @{ + */ +/** @defgroup DCMIPP_Line_Select_Mode DCMIPP Line Select Mode + * @{ + */ +#define DCMIPP_LSM_ALL 0U /*!< Interface captures all received lines */ +#define DCMIPP_LSM_ALTERNATE_2 (1U << DCMIPP_P0PPCR_LSM_Pos ) /*!< Interface captures one line out of two */ +/** + * @} + */ +/** @defgroup DCMIPP_Line_Start_Mode DCMIPP Line Start Mode + * @{ + */ +#define DCMIPP_OELS_ODD 0U /*!< Interface captures first line from the frame start, + second one is dropped */ +#define DCMIPP_OELS_EVEN (1U << DCMIPP_P0PPCR_OELS_Pos) /*!< Interface captures second line from the frame + start, first one is dropped */ +/** + * @} + */ +/** + * @} + */ + +/** @defgroup DCMIPP_Pipe_Byte_Decimation DCMIPP Pipe Byte Decimation + * @{ + */ +/** @defgroup DCMIPP_Byte_Select_Mode DCMIPP Byte Select Mode + * @{ + */ +#define DCMIPP_BSM_ALL 0U /*!< Interface captures all received data */ +#define DCMIPP_BSM_DATA_OUT_2 (1U << DCMIPP_P0PPCR_BSM_Pos) /*!< Interface captures 1 data out of 2 */ +#define DCMIPP_BSM_BYTE_OUT_4 (2U << DCMIPP_P0PPCR_BSM_Pos) /*!< Interface captures 1 byte out of 4 */ +#define DCMIPP_BSM_2BYTE_OUT_4 (3U << DCMIPP_P0PPCR_BSM_Pos) /*!< Interface captures 2 byte out of 4 */ +/** + * @} + */ +/** @defgroup DCMIPP_Byte_Start_Mode DCMIPP Byte Start Mode + * @{ + */ +#define DCMIPP_OEBS_ODD 0U /*!< Interface captures first data (byte or double byte) + from the frame/line start,second one being dropped */ +#define DCMIPP_OEBS_EVEN (1U << DCMIPP_P0PPCR_OEBS_Pos) /*!< Interface captures second data (byte or double byte) + from the frame/line start, first one is dropped */ +/** + * @} + */ +/** + * @} + */ + +/** @defgroup DCMIPP_Memory DCMIPP Memory + * @{ + */ +#define DCMIPP_MEMORY_ADDRESS_0 0U /*!< Base destination address */ +#define DCMIPP_MEMORY_ADDRESS_1 1U /*!< Second destination address */ +/** + * @} + */ +/** @defgroup DCMIPP_LineMult DCMIPP Line Mult + * @{ + */ +#define DCMIPP_MULTILINE_1_LINE 0U /*!< Event after every 1 line */ +#define DCMIPP_MULTILINE_2_LINES (1U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 2 lines */ +#define DCMIPP_MULTILINE_4_LINES (2U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 4 lines */ +#define DCMIPP_MULTILINE_8_LINES (3U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 8 lines */ +#define DCMIPP_MULTILINE_16_LINES (4U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 16 lines */ +#define DCMIPP_MULTILINE_32_LINES (5U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 32 lines */ +#define DCMIPP_MULTILINE_64_LINES (6U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 64 lines */ +#define DCMIPP_MULTILINE_128_LINES (7U << DCMIPP_P0PPCR_LINEMULT_Pos) /*!< Event after every 128 lines */ +/** + * @} + */ +/** @defgroup DCMIPP_Interrupt_Sources DCMIPP Interrupt sources + * @{ + */ +#define DCMIPP_IT_AXI_TRANSFER_ERROR DCMIPP_CMIER_ATXERRIE /*!< IPPLUG AXI Transfer error interrupt */ +#define DCMIPP_IT_PARALLEL_SYNC_ERROR DCMIPP_CMIER_PRERRIE /*!< Sync error interrupt on parallel interface */ +#define DCMIPP_IT_PIPE0_FRAME DCMIPP_CMIER_P0FRAMEIE /*!< Frame capture interrupt complete for pipe0 */ +#define DCMIPP_IT_PIPE0_VSYNC DCMIPP_CMIER_P0VSYNCIE /*!< Vertical sync interrupt for pipe0 */ +#define DCMIPP_IT_PIPE0_LINE DCMIPP_CMIER_P0LINEIE /*!< Multiline interrupt for pipe0 */ +#define DCMIPP_IT_PIPE0_LIMIT DCMIPP_CMIER_P0LIMITIE /*!< Limit interrupt for pipe0 */ +#define DCMIPP_IT_PIPE0_OVR DCMIPP_CMIER_P0OVRIE /*!< Overrun interrupt for pipe0 */ +/** + * @} + */ + +/** @defgroup DCMIPP_Interrupt_Flags DCMIPP Interrupt Flags + * @{ + */ +#define DCMIPP_FLAG_AXI_TRANSFER_ERROR DCMIPP_CMSR2_ATXERRF /*!< IPPLUG AXI Transfer error interrupt flag */ +#define DCMIPP_FLAG_PARALLEL_SYNC_ERROR DCMIPP_CMSR2_PRERRF /*!< Synchronization error interrupt on parallel interface + flag */ +#define DCMIPP_FLAG_PIPE0_FRAME DCMIPP_CMSR2_P0FRAMEF /*!< Frame capture interrupt complete for pipe0 flag */ +#define DCMIPP_FLAG_PIPE0_VSYNC DCMIPP_CMSR2_P0VSYNCF /*!< Vertical synch interrupt for pipe0 flag */ +#define DCMIPP_FLAG_PIPE0_LINE DCMIPP_CMSR2_P0LINEF /*!< Multiline interrupt for pipe0 flag */ +#define DCMIPP_FLAG_PIPE0_LIMIT DCMIPP_CMSR2_P0LIMITF /*!< Limit interrupt for pipe0 flag */ +#define DCMIPP_FLAG_PIPE0_OVR DCMIPP_CMSR2_P0OVRF /*!< Overrun interrupt for pipe0 flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DCMIPP_Exported_Macros DCMIPP Exported Macros + * @brief DCMIPP Exported Macros + * @{ + */ +/** + * @brief Enable the specified DCMIPP interrupts. + * @param __HANDLE__ DCMIPP handle + * @param __INTERRUPT__ specifies the DCMIPP interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DCMIPP_IT_AXI_TRANSFER_ERR IPPLUG AXI Transfer error interrupt + * @arg DCMIPP_IT_PARALLEL_SYNC_ERR Synchronization error interrupt on parallel interface + * @arg DCMIPP_IT_PIPE0_FRAME Frame capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_VSYNC Vertical sync interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LINE Multi-line capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LIMIT Limit interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_OVR Overrun interrupt for the pipe0 + * @retval None + */ +#define __HAL_DCMIPP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CMIER |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DCMIPP interrupts. + * @param __HANDLE__ DCMIPP handle + * @param __INTERRUPT__ specifies the DCMIPP interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg DCMIPP_IT_AXI_TRANSFER_ERR IPPLUG AXI Transfer error interrupt + * @arg DCMIPP_IT_PARALLEL_SYNC_ERR Synchronization error interrupt on parallel interface + * @arg DCMIPP_IT_PIPE0_FRAME Frame capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_VSYNC Vertical sync interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LINE Multi-line capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LIMIT Limit interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_OVR Overrun interrupt for the pipe0 + * @retval None + */ +#define __HAL_DCMIPP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CMIER &= ~(__INTERRUPT__)) + +/** + * @brief Get the DCMIPP pending interrupt flags. + * @param __HANDLE__ DCMIPP handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DCMIPP_FLAG_AXI_TRANSFER_ERR IPPLUG AXI Transfer error interrupt flag + * @arg DCMIPP_FLAG_PARALLEL_SYNC_ERR Synchronization error interrupt flag on parallel interface + * @arg DCMIPP_FLAG_PIPE0_FRAME Frame capture complete interrupt flag for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_VSYNC Vertical sync interrupt flag for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_LINE Multi-line capture complete interrupt flag for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_LIMIT Limit interrupt flag for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_OVR Overrun interrupt flag for the pipe0 + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DCMIPP_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CMSR2 & (__FLAG__)) + +/** + * @brief Clear the DCMIPP pending interrupt flags. + * @param __HANDLE__ DCMIPP handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DCMIPP_FLAG_AXI_TRANSFER_ERR IPPLUG AXI Transfer error interrupt + * @arg DCMIPP_FLAG_PARALLEL_SYNC_ERR Synchronization error interrupt on parallel interface + * @arg DCMIPP_FLAG_PIPE0_FRAME Frame capture complete interrupt for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_VSYNC Vertical sync interrupt for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_LINE Multi-line capture complete interrupt for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_LIMIT Limit interrupt for the pipe0 + * @arg DCMIPP_FLAG_PIPE0_OVR Overrun interrupt for the pipe0 + * @retval None + */ +#define __HAL_DCMIPP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CMFCR = (__FLAG__)) + +/** + * @brief Checks whether the specified DCMIPP interrupt is enabled or not. + * @param __HANDLE__ DCMIPP handle + * @param __INTERRUPT__ specifies the DCMIPP interrupt sources to be checked. + * This parameter can be any combination of the following values: + * @arg DCMIPP_IT_AXI_TRANSFER_ERR IPPLUG AXI Transfer error interrupt + * @arg DCMIPP_IT_PARALLEL_SYNC_ERR Synchronization error interrupt on parallel interface + * @arg DCMIPP_IT_PIPE0_FRAME Frame capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_VSYNC Vertical sync interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LINE Multi-line capture complete interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_LIMIT Limit interrupt for the pipe0 + * @arg DCMIPP_IT_PIPE0_OVR Overrun interrupt for the pipe0 + * @retval The state of DCMIPP interrupt (SET or RESET). + */ +#define __HAL_DCMIPP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CMIER & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DCMIPP_Exported_Functions + * @{ + */ + +/** @addtogroup DCMIPP_Initialization_De-Initialization_Functions DCMIPP Initialization De-Initialization Functions + * @brief Initialization and De-Initialization Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_Init(DCMIPP_HandleTypeDef *hdcmipp); +HAL_StatusTypeDef HAL_DCMIPP_DeInit(DCMIPP_HandleTypeDef *hdcmipp); +void HAL_DCMIPP_MspInit(DCMIPP_HandleTypeDef *hdcmipp); +void HAL_DCMIPP_MspDeInit(DCMIPP_HandleTypeDef *hdcmipp); +/** + * @} + */ + +/** @defgroup DCMIPP_Configuration_Functions DCMIPP Configuration Functions + * @brief Configuration Functions + * @{ + */ + +HAL_StatusTypeDef HAL_DCMIPP_PARALLEL_SetConfig(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_ParallelConfTypeDef *pParallelConfig); + +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + const DCMIPP_PipeConfTypeDef *pPipeConfig); +HAL_StatusTypeDef HAL_DCMIPP_SetIPPlugConfig(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_IPPlugConfTypeDef *pIPPlugConfig); +/** + * @} + */ + +/** @addtogroup DCMIPP_IO_operation_Functions DCMIPP IO operation Functions + * @brief IO Operation Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Start(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t DstAddress, + uint32_t CaptureMode); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DoubleBufferStart(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t DstAddress0, + uint32_t DstAddress1, uint32_t CaptureMode); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Stop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Suspend(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Resume(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); + +/** + * @} + */ + +/** @addtogroup DCMIPP_IRQ_and_Callbacks_Functions DCMIPP IRQ and Callbacks Functions + * @brief IRQ and Callbacks functions + * @{ + */ +/** @addtogroup DCMIPP_IRQHandler_Functions IRQHandler Functions + * @{ + */ +void HAL_DCMIPP_IRQHandler(DCMIPP_HandleTypeDef *hdcmipp); +/** + * @} + */ +/** @addtogroup DCMIPP_Callback_Functions Callback Functions + * @{ + */ +void HAL_DCMIPP_PIPE_FrameEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +void HAL_DCMIPP_PIPE_VsyncEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +void HAL_DCMIPP_PIPE_LineEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +void HAL_DCMIPP_PIPE_LimitEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +void HAL_DCMIPP_PIPE_ErrorCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +void HAL_DCMIPP_ErrorCallback(DCMIPP_HandleTypeDef *hdcmipp); +/** + * @} + */ + +/** @addtogroup DCMIPP_RegisterCallback_Functions Register Callback Functions + * @{ + */ +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_DCMIPP_RegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, HAL_DCMIPP_CallbackIDTypeDef CallbackID, + pDCMIPP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DCMIPP_UnRegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, + HAL_DCMIPP_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_DCMIPP_PIPE_RegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, + HAL_DCMIPP_PIPE_CallbackIDTypeDef CallbackID, + pDCMIPP_PIPE_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_UnRegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, + HAL_DCMIPP_PIPE_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DCMIPP_Decimation_Functions DCMIPP Decimation Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetBytesDecimationConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t SelectStart, uint32_t SelectMode); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetLinesDecimationConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t SelectStart, uint32_t SelectMode); +/** + * @} + */ +/** @defgroup DCMIPP_Crop_Functions DCMIPP Crop Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetCropConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + const DCMIPP_CropConfTypeDef *pCropConfig); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableCrop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableCrop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +/** + * @} + */ +/** @defgroup DCMIPP_Line_Event_Functions DCMIPP Line Event Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableLineEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Line); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableLineEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +/** + * @} + */ +/** @defgroup DCMIPP_LimitEvent_Functions DCMIPP Limit Event Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableLimitEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Limit); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableLimitEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +/** + * @} + */ + +/** @defgroup DCMIPP_PeripheralControl_Functions DCMIPP Peripheral Control Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetFrameRate(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t FrameRate); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetCaptureMode(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t CaptureMode); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableCapture(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetMemoryAddress(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Memory, + uint32_t DstAddress); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_PARALLEL_SetInputPixelFormat(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t InputPixelFormat); +HAL_StatusTypeDef HAL_DCMIPP_PARALLEL_SetSyncUnmask(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_EmbeddedSyncUnmaskTypeDef *SyncUnmask); +/** + * @} + */ + +/** @defgroup DCMIPP_Frame_Counter_Functions DCMIPP Frame Counter Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_ResetFrameCounter(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +HAL_StatusTypeDef HAL_DCMIPP_PIPE_ReadFrameCounter(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t *pCounter); +/** + * @} + */ +/** @defgroup DCMIPP_Data_Counter_Functions DCMIPP Data Counter Functions + * @{ + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_GetDataCounter(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t *pCounter); +/** + * @} + */ + +/** @addtogroup DCMIPP_State_and_Error_Functions DCMIPP State and Error Functions + * @{ + */ +HAL_DCMIPP_StateTypeDef HAL_DCMIPP_GetState(const DCMIPP_HandleTypeDef *hdcmipp); +HAL_DCMIPP_PipeStateTypeDef HAL_DCMIPP_PIPE_GetState(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe); +uint32_t HAL_DCMIPP_GetError(const DCMIPP_HandleTypeDef *hdcmipp); + +/** + * @} + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DCMIPP_Private_Macros DCMIPP Private Macros + * @{ + */ +#define IS_DCMIPP_PIPE(PIPE) ((PIPE) == DCMIPP_PIPE0) +#define IS_DCMIPP_FORMAT(FORMAT) (((FORMAT) == DCMIPP_FORMAT_BYTE) ||\ + ((FORMAT) == DCMIPP_FORMAT_YUV422) ||\ + ((FORMAT) == DCMIPP_FORMAT_RGB565) ||\ + ((FORMAT) == DCMIPP_FORMAT_RGB666) ||\ + ((FORMAT) == DCMIPP_FORMAT_RGB888) ||\ + ((FORMAT) == DCMIPP_FORMAT_RAW8 ) ||\ + ((FORMAT) == DCMIPP_FORMAT_RAW10 ) ||\ + ((FORMAT) == DCMIPP_FORMAT_RAW12 ) ||\ + ((FORMAT) == DCMIPP_FORMAT_RAW14 ) ||\ + ((FORMAT) == DCMIPP_FORMAT_MONOCHROME_8B) ||\ + ((FORMAT) == DCMIPP_FORMAT_MONOCHROME_10B) ||\ + ((FORMAT) == DCMIPP_FORMAT_MONOCHROME_12B) ||\ + ((FORMAT) == DCMIPP_FORMAT_MONOCHROME_14B)) + + +#define IS_DCMIPP_PCKPOLARITY(POLARITY)(((POLARITY) == DCMIPP_PCKPOLARITY_FALLING) || \ + ((POLARITY) == DCMIPP_PCKPOLARITY_RISING)) + +#define IS_DCMIPP_VSPOLARITY(POLARITY)(((POLARITY) == DCMIPP_VSPOLARITY_LOW) || \ + ((POLARITY) == DCMIPP_VSPOLARITY_HIGH)) + +#define IS_DCMIPP_HSPOLARITY(POLARITY)(((POLARITY) == DCMIPP_HSPOLARITY_LOW) || \ + ((POLARITY) == DCMIPP_HSPOLARITY_HIGH)) + + +#define IS_DCMIPP_EXTENDED_DATA_MODE(INTERFACE)(((INTERFACE) == DCMIPP_INTERFACE_8BITS ) ||\ + ((INTERFACE) == DCMIPP_INTERFACE_10BITS) ||\ + ((INTERFACE) == DCMIPP_INTERFACE_12BITS) ||\ + ((INTERFACE) == DCMIPP_INTERFACE_14BITS) ||\ + ((INTERFACE) == DCMIPP_INTERFACE_16BITS)) + + +#define IS_DCMIPP_SYNC_MODE(SYNC_MODE) (((SYNC_MODE) == DCMIPP_SYNCHRO_HARDWARE) ||\ + ((SYNC_MODE) == DCMIPP_SYNCHRO_EMBEDDED)) + +#define IS_DCMIPP_SWAP_BITS(SWAP_BITS) (((SWAP_BITS) == DCMIPP_SWAPBITS_ENABLE) ||\ + ((SWAP_BITS) == DCMIPP_SWAPBITS_DISABLE)) + +#define IS_DCMIPP_SWAP_CYCLES(SWAP_CYCLES) (((SWAP_CYCLES) == DCMIPP_SWAPCYCLES_ENABLE) ||\ + ((SWAP_CYCLES) == DCMIPP_SWAPCYCLES_DISABLE)) + + + +#define IS_DCMIPP_FRAME_RATE(FRAME_RATE) (((FRAME_RATE) == DCMIPP_FRAME_RATE_ALL) ||\ + ((FRAME_RATE) == DCMIPP_FRAME_RATE_1_OVER_2) ||\ + ((FRAME_RATE) == DCMIPP_FRAME_RATE_1_OVER_4) ||\ + ((FRAME_RATE) == DCMIPP_FRAME_RATE_1_OVER_8)) + + +#define IS_DCMIPP_CLIENT(CLIENT) (((CLIENT) == DCMIPP_CLIENT1)) + +#define IS_DCMIPP_DPREG_END(DPREG_END) ((DPREG_END) <= 0x1FU) +#define IS_DCMIPP_DPREG_START(DPREG_START) ((DPREG_START) <= 0x1FU) + +#define IS_DCMIPP_MAX_OUTSTANDING_TRANSACTIONS(OUTS_TRANS) (((OUTS_TRANS) == DCMIPP_OUTSTANDING_TRANSACTION_NONE )||\ + ((OUTS_TRANS) == DCMIPP_OUTSTANDING_TRANSACTION_2 )||\ + ((OUTS_TRANS) == DCMIPP_OUTSTANDING_TRANSACTION_3 )||\ + ((OUTS_TRANS) == DCMIPP_OUTSTANDING_TRANSACTION_4 )) +#define IS_DCMIPP_MEMORY_PAGE_SIZE(MEMORY_PAGE_SIZE) (((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_64BYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_128BYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_256BYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_512BYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_1KBYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_2KBYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_4KBYTES) ||\ + ((MEMORY_PAGE_SIZE) == DCMIPP_MEMORY_PAGE_SIZE_8KBYTES)) +#define IS_DCMIPP_TRAFFIC(TRAFFIC) (((TRAFFIC) == DCMIPP_TRAFFIC_BURST_SIZE_8BYTES ) ||\ + ((TRAFFIC) == DCMIPP_TRAFFIC_BURST_SIZE_16BYTES) ||\ + ((TRAFFIC) == DCMIPP_TRAFFIC_BURST_SIZE_32BYTES) ||\ + ((TRAFFIC) == DCMIPP_TRAFFIC_BURST_SIZE_64BYTES) ||\ + ((TRAFFIC) == DCMIPP_TRAFFIC_BURST_SIZE_128BYTES)) +#define IS_DCMIPP_WLRU_RATIO(WLRU_RATIO) ((WLRU_RATIO)<= 0xFU) + +#define IS_DCMIPP_CAPTURE_MODE(CAPTURE_MODE) (((CAPTURE_MODE) == DCMIPP_MODE_CONTINUOUS)||\ + ((CAPTURE_MODE) == DCMIPP_MODE_SNAPSHOT)) + +#define IS_DCMIPP_PIPE_CROP_AREA(CROP_AREA)(((CROP_AREA) == DCMIPP_POSITIVE_AREA) ||\ + ((CROP_AREA) == DCMIPP_NEGATIVE_AREA)) + +#define IS_DCMIPP_PIPE_CROP_HSIZE(CROP_HSIZE) (((CROP_HSIZE) >= 0x1U) && ((CROP_HSIZE) <= 0xFFFU)) +#define IS_DCMIPP_PIPE_CROP_VSIZE(CROP_VSIZE) (((CROP_VSIZE) >= 0x1U) && ((CROP_VSIZE) <= 0xFFFU)) +#define IS_DCMIPP_PIPE_CROP_VSTART(CROP_VSTART) ((CROP_VSTART) <= 0xFFFU) +#define IS_DCMIPP_PIPE_CROP_HSTART(CROP_HSTART) ((CROP_HSTART) <= 0xFFFU) + +#define IS_DCMIPP_BYTE_SELECT_MODE(BYTE_SELECT) (((BYTE_SELECT) == DCMIPP_BSM_ALL) ||\ + ((BYTE_SELECT) == DCMIPP_BSM_DATA_OUT_2) ||\ + ((BYTE_SELECT) == DCMIPP_BSM_BYTE_OUT_4) ||\ + ((BYTE_SELECT) == DCMIPP_BSM_2BYTE_OUT_4)) + +#define IS_DCMIPP_BYTE_SELECT_START(BYTE_START)(((BYTE_START) == DCMIPP_OEBS_ODD) ||\ + ((BYTE_START) == DCMIPP_OEBS_EVEN)) + +#define IS_DCMIPP_LINE_SELECT_MODE(LINE_SELECT) (((LINE_SELECT) == DCMIPP_LSM_ALL) ||\ + ((LINE_SELECT) == DCMIPP_LSM_ALTERNATE_2)) + +#define IS_DCMIPP_LINE_SELECT_START(LINE__START)(((LINE__START) == DCMIPP_OELS_ODD) ||\ + ((LINE__START) == DCMIPP_OELS_EVEN)) + + +#define IS_DCMIPP_MEMORY_ADDRESS(MEMORY_ADDRESS) (((MEMORY_ADDRESS) == DCMIPP_MEMORY_ADDRESS_0) ||\ + ((MEMORY_ADDRESS) == DCMIPP_MEMORY_ADDRESS_1)) + +#define IS_DCMIPP_DATA_LIMIT(DATA_LIMIT) (((DATA_LIMIT) >=1U ) && ((DATA_LIMIT) <= 0xFFFFFFU)) + + +#define IS_DCMIPP_PIPE_MULTILINE(MULTILINE) (((MULTILINE) == DCMIPP_MULTILINE_1_LINE ) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_2_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_4_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_8_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_16_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_32_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_64_LINES) ||\ + ((MULTILINE) == DCMIPP_MULTILINE_128_LINES)) + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DCMIPP */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7RSxx_HAL_DCMIPP_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_def.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_def.h new file mode 100644 index 000000000..ff03e8cf6 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_def.h @@ -0,0 +1,195 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_DEF_H +#define STM32H7RSxx_HAL_DEF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#if !defined(UNUSED) +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((packed)) +#endif /* packed */ +#elif defined (__GNUC__) /* GNU Compiler */ +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + +/* Macro to get buffer 32-bytes aligned (aligned to cache line width) */ +#define ALIGN_32BYTES(buf) buf __attribute__((aligned(32))) + +/* Legacy macros to get variable 4-bytes aligned */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__((aligned(4))) +#endif /* __ALIGN_END */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +/* ARM Compiler V6 + --------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined (__ICCARM__) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined (__GNUC__) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif /* __ARMCC_VERSION */ + +/** + * @brief __NOINLINE definition + */ +#if (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined (__GNUC__) +/* ARM V6 & GNU Compiler + --------------------- +*/ +#define __NOINLINE __attribute__((noinline)) + +#elif defined (__ICCARM__) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif /* __ARMCC_VERSION || __GNUC__ */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_DEF_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma.h new file mode 100644 index 000000000..039c61f94 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma.h @@ -0,0 +1,875 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/ +#ifndef STM32H7RSxx_HAL_DMA_H +#define STM32H7RSxx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + + +/* Exported types ----------------------------------------------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @brief DMA Exported Types + * @{ + */ + +/** + * @brief DMA Transfer Configuration Structure definition. + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the DMA channel request. + This parameter can be a value of @ref DMA_Request_Selection */ + + uint32_t BlkHWRequest; /*!< Specifies the Block hardware request mode for DMA channel. + Block Hardware request feature can be used only with dedicated peripherals. + This parameter can be a value of @ref DMA_Block_Request */ + + uint32_t Direction; /*!< Specifies the transfer direction for DMA channel. + This parameter can be a value of @ref DMA_Transfer_Direction */ + + uint32_t SrcInc; /*!< Specifies the source increment mode for the DMA channel. + This parameter can be a value of @ref DMA_Source_Increment_Mode */ + + uint32_t DestInc; /*!< Specifies the destination increment mode for the DMA channel. + This parameter can be a value of @ref DMA_Destination_Increment_Mode */ + + uint32_t SrcDataWidth; /*!< Specifies the source data width for the DMA channel. + This parameter can be a value of @ref DMA_Source_Data_Width */ + + uint32_t DestDataWidth; /*!< Specifies the destination data width for the DMA channel. + This parameter can be a value of @ref DMA_Destination_Data_Width */ + + uint32_t Priority; /*!< Specifies the priority level for the DMA channel. + This parameter can be a value of @ref DMA_Priority_Level */ + + uint32_t SrcBurstLength; /*!< Specifies the source burst length (number of beats within a burst) for the DMA + channel. + This parameter can be a value between 1 and 64 */ + + uint32_t DestBurstLength; /*!< Specifies the destination burst length (number of beats within a burst) for the + DMA channel. + This parameter can be a value between 1 and 64 */ + + uint32_t TransferAllocatedPort; /*!< Specifies the transfer allocated ports. + This parameter can be a combination of @ref DMA_Transfer_Allocated_Port */ + + uint32_t TransferEventMode; /*!< Specifies the transfer event mode for the DMA channel. + This parameter can be a value of @ref DMA_Transfer_Event_Mode */ + + uint32_t Mode; /*!< Specifies the transfer mode for the DMA channel. + This parameter can be a value of @ref DMA_Transfer_Mode */ + +} DMA_InitTypeDef; + +/** + * @brief DMA Linked-List Configuration Structure Definition. + */ +typedef struct +{ + uint32_t Priority; /*!< Specifies the priority level for the DMA channel. + This parameter can be a value of @ref DMA_Priority_Level */ + + uint32_t LinkStepMode; /*!< Specifies the link step mode for the DMA channel. + This parameter can be a value of @ref DMAEx_Link_Step_Mode */ + + uint32_t LinkAllocatedPort; /*!< Specifies the linked-list allocated port for the DMA channel. + This parameter can be a value of @ref DMAEx_Link_Allocated_Port */ + + uint32_t TransferEventMode; /*!< Specifies the transfer event mode for the DMA channel. + This parameter can be a value of @ref DMA_Transfer_Event_Mode */ + + uint32_t LinkedListMode; /*!< Specifies linked-list transfer mode for the DMA channel. + This parameter can be a value of @ref DMAEx_LinkedList_Mode */ + +} DMA_InitLinkedListTypeDef; + +/** + * @brief HAL DMA State Enumeration Definition. + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_ERROR = 0x03U, /*!< DMA error state */ + HAL_DMA_STATE_ABORT = 0x04U, /*!< DMA Abort state */ + HAL_DMA_STATE_SUSPEND = 0x05U, /*!< DMA Suspend state */ + +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Level Complete Enumeration Definition. + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full channel transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half channel transfer */ + +} HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callbacks IDs Enumeration Definition. + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Complete transfer callback ID */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half complete transfer callback ID */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error transfer callback ID */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort transfer callback ID */ + HAL_DMA_XFER_SUSPEND_CB_ID = 0x04U, /*!< Suspend transfer callback ID */ + HAL_DMA_XFER_ALL_CB_ID = 0x05U /*!< All callback ID */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register the DMA channel base address */ + + DMA_InitTypeDef Init; /*!< DMA channel init parameters */ + + DMA_InitLinkedListTypeDef InitLinkedList; /*!< DMA channel linked-list init parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + uint32_t Mode; /*!< DMA transfer mode */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + __IO uint32_t ErrorCode; /*!< DMA error code */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer Abort callback */ + + void (* XferSuspendCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer Suspend callback */ + + struct __DMA_QListTypeDef *LinkedListQueue; /*!< DMA linked-list queue */ + +} DMA_HandleTypeDef; +/** + * @} + */ + + +/* Exported constants ------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @brief DMA Exported constants + * @{ + */ + +/** @defgroup DMA_Error_Codes DMA Error Codes + * @brief DMA Error Codes + * @{ + */ +#define HAL_DMA_ERROR_NONE (0x0000U) /*!< No error */ +#define HAL_DMA_ERROR_DTE (0x0001U) /*!< Data transfer error */ +#define HAL_DMA_ERROR_ULE (0x0002U) /*!< Update linked-list item error */ +#define HAL_DMA_ERROR_USE (0x0004U) /*!< User setting error */ +#define HAL_DMA_ERROR_TO (0x0008U) /*!< Trigger overrun error */ +#define HAL_DMA_ERROR_TIMEOUT (0x0010U) /*!< Timeout error */ +#define HAL_DMA_ERROR_NO_XFER (0x0020U) /*!< No transfer ongoing error */ +#define HAL_DMA_ERROR_BUSY (0x0040U) /*!< Busy error */ +#define HAL_DMA_ERROR_INVALID_CALLBACK (0x0080U) /*!< Invalid callback error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x0100U) /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Interrupt_Enable_Definition DMA Interrupt Enable Definition + * @brief DMA Interrupt Enable Definition + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define DMA_IT_HT DMA_CCR_HTIE /*!< Half transfer complete interrupt */ +#define DMA_IT_DTE DMA_CCR_DTEIE /*!< Data transfer error interrupt */ +#define DMA_IT_ULE DMA_CCR_ULEIE /*!< Update linked-list item error interrupt */ +#define DMA_IT_USE DMA_CCR_USEIE /*!< User eetting error interrupt */ +#define DMA_IT_SUSP DMA_CCR_SUSPIE /*!< Completed suspension interrupt */ +#define DMA_IT_TO DMA_CCR_TOIE /*!< Trigger overrun interrupt */ +/** + * @} + */ + +/** @defgroup DMA_Flag_Definition DMA Flag Definition + * @brief DMA Flag Definition + * @{ + */ +#define DMA_FLAG_IDLE DMA_CSR_IDLEF /*!< Idle flag */ +#define DMA_FLAG_TC DMA_CSR_TCF /*!< Transfer complete flag */ +#define DMA_FLAG_HT DMA_CSR_HTF /*!< Half transfer complete flag */ +#define DMA_FLAG_DTE DMA_CSR_DTEF /*!< Data transfer error flag */ +#define DMA_FLAG_ULE DMA_CSR_ULEF /*!< Update linked-list item error flag */ +#define DMA_FLAG_USE DMA_CSR_USEF /*!< User setting error flag */ +#define DMA_FLAG_SUSP DMA_CSR_SUSPF /*!< Completed suspension flag */ +#define DMA_FLAG_TO DMA_CSR_TOF /*!< Trigger overrun flag */ +/** + * @} + */ + +/** @defgroup DMA_Request_Selection DMA Request Selection + * @brief DMA Request Selection + * @{ + */ +/* HPDMA1 requests */ +#define HPDMA1_REQUEST_JPEG_RX 0U /*!< HPDMA1 HW request is JPEG_DMA_RX */ +#define HPDMA1_REQUEST_JPEG_TX 1U /*!< HPDMA1 HW request is JPEG_DMA_TX */ +#define HPDMA1_REQUEST_XSPI1 2U /*!< HPDMA1 HW request is XSPI1 */ +#define HPDMA1_REQUEST_XSPI2 3U /*!< HPDMA1 HW request is XSPI2 */ +#define HPDMA1_REQUEST_SPI3_RX 4U /*!< HPDMA1 HW request is SPI3_RX */ +#define HPDMA1_REQUEST_SPI3_TX 5U /*!< HPDMA1 HW request is SPI3_TX */ +#define HPDMA1_REQUEST_SPI4_RX 6U /*!< HPDMA1 HW request is SPI4_RX */ +#define HPDMA1_REQUEST_SPI4_TX 7U /*!< HPDMA1 HW request is SPI4_TX */ +#define HPDMA1_REQUEST_ADC1 8U /*!< HPDMA1 HW request is ADC1 */ +#define HPDMA1_REQUEST_ADC2 9U /*!< HPDMA1 HW request is ADC2 */ +#define HPDMA1_REQUEST_ADF1_FLT0 10U /*!< HPDMA1 HW request is ADF1_FLT0 */ +#define HPDMA1_REQUEST_UART4_RX 11U /*!< HPDMA1 HW request is UART4_RX */ +#define HPDMA1_REQUEST_UART4_TX 12U /*!< HPDMA1 HW request is UART4_TX */ +#define HPDMA1_REQUEST_UART5_RX 13U /*!< HPDMA1 HW request is UART5_RX */ +#define HPDMA1_REQUEST_UART5_TX 14U /*!< HPDMA1 HW request is UART5_TX */ +#define HPDMA1_REQUEST_UART7_RX 15U /*!< HPDMA1 HW request is UART7_RX */ +#define HPDMA1_REQUEST_UART7_TX 16U /*!< HPDMA1 HW request is UART7_TX */ +#define HPDMA1_REQUEST_LPTIM2_IC1 17U /*!< HPDMA1 HW request is LPTIM2_IC1 */ +#define HPDMA1_REQUEST_LPTIM2_IC2 18U /*!< HPDMA1 HW request is LPTIM2_IC2 */ +#define HPDMA1_REQUEST_LPTIM2_UE 19U /*!< HPDMA1 HW request is LPTIM2_UE */ + +/* GPDMA1 requests */ +#define GPDMA1_REQUEST_ADC1 0U /*!< GPDMA1 HW request is ADC1 */ +#define GPDMA1_REQUEST_ADC2 1U /*!< GPDMA1 HW request is ADC2 */ +#define GPDMA1_REQUEST_CRYP_IN 2U /*!< GPDMA1 HW request is CRYP_IN */ +#define GPDMA1_REQUEST_CRYP_OUT 3U /*!< GPDMA1 HW request is CRYP_OUT */ +#define GPDMA1_REQUEST_SAES_IN 4U /*!< GPDMA1 HW request is SAES_IN */ +#define GPDMA1_REQUEST_SAES_OUT 5U /*!< GPDMA1 HW request is SAES_OUT */ +#define GPDMA1_REQUEST_HASH_IN 6U /*!< GPDMA1 HW request is HASH_IN */ +#define GPDMA1_REQUEST_TIM1_CH1 7U /*!< GPDMA1 HW request is TIM1_CH1 */ +#define GPDMA1_REQUEST_TIM1_CH2 8U /*!< GPDMA1 HW request is TIM1_CH2 */ +#define GPDMA1_REQUEST_TIM1_CH3 9U /*!< GPDMA1 HW request is TIM1_CH3 */ +#define GPDMA1_REQUEST_TIM1_CH4 10U /*!< GPDMA1 HW request is TIM1_CH4 */ +#define GPDMA1_REQUEST_TIM1_UP 11U /*!< GPDMA1 HW request is TIM1_UP */ +#define GPDMA1_REQUEST_TIM1_TRIG 12U /*!< GPDMA1 HW request is TIM1_TRIG */ +#define GPDMA1_REQUEST_TIM1_COM 13U /*!< GPDMA1 HW request is TIM1_COM */ +#define GPDMA1_REQUEST_TIM2_CH1 14U /*!< GPDMA1 HW request is TIM2_CH1 */ +#define GPDMA1_REQUEST_TIM2_CH2 15U /*!< GPDMA1 HW request is TIM2_CH2 */ +#define GPDMA1_REQUEST_TIM2_CH3 16U /*!< GPDMA1 HW request is TIM2_CH3 */ +#define GPDMA1_REQUEST_TIM2_CH4 17U /*!< GPDMA1 HW request is TIM2_CH4 */ +#define GPDMA1_REQUEST_TIM2_UP 18U /*!< GPDMA1 HW request is TIM2_UP */ +#define GPDMA1_REQUEST_TIM2_TRIG 19U /*!< GPDMA1 HW request is TIM2_TRIG */ +#define GPDMA1_REQUEST_TIM3_CH1 20U /*!< GPDMA1 HW request is TIM3_CH1 */ +#define GPDMA1_REQUEST_TIM3_CH2 21U /*!< GPDMA1 HW request is TIM3_CH2 */ +#define GPDMA1_REQUEST_TIM3_CH3 22U /*!< GPDMA1 HW request is TIM3_CH3 */ +#define GPDMA1_REQUEST_TIM3_CH4 23U /*!< GPDMA1 HW request is TIM3_CH4 */ +#define GPDMA1_REQUEST_TIM3_UP 24U /*!< GPDMA1 HW request is TIM3_UP */ +#define GPDMA1_REQUEST_TIM3_TRIG 25U /*!< GPDMA1 HW request is TIM3_TRIG */ +#define GPDMA1_REQUEST_TIM4_CH1 26U /*!< GPDMA1 HW request is TIM4_CH1 */ +#define GPDMA1_REQUEST_TIM4_CH2 27U /*!< GPDMA1 HW request is TIM4_CH2 */ +#define GPDMA1_REQUEST_TIM4_CH3 28U /*!< GPDMA1 HW request is TIM4_CH3 */ +#define GPDMA1_REQUEST_TIM4_CH4 29U /*!< GPDMA1 HW request is TIM4_CH4 */ +#define GPDMA1_REQUEST_TIM4_UP 30U /*!< GPDMA1 HW request is TIM4_UP */ +#define GPDMA1_REQUEST_TIM4_TRIG 31U /*!< GPDMA1 HW request is TIM4_TRIG */ +#define GPDMA1_REQUEST_TIM5_CH1 32U /*!< GPDMA1 HW request is TIM5_CH1 */ +#define GPDMA1_REQUEST_TIM5_CH2 33U /*!< GPDMA1 HW request is TIM5_CH2 */ +#define GPDMA1_REQUEST_TIM5_CH3 34U /*!< GPDMA1 HW request is TIM5_CH3 */ +#define GPDMA1_REQUEST_TIM5_CH4 35U /*!< GPDMA1 HW request is TIM5_CH4 */ +#define GPDMA1_REQUEST_TIM5_UP 36U /*!< GPDMA1 HW request is TIM5_UP */ +#define GPDMA1_REQUEST_TIM5_TRIG 37U /*!< GPDMA1 HW request is TIM5_TRIG */ +#define GPDMA1_REQUEST_TIM6_UP 38U /*!< GPDMA1 HW request is TIM6_UP */ +#define GPDMA1_REQUEST_TIM7_UP 39U /*!< GPDMA1 HW request is TIM7_UP */ +#define GPDMA1_REQUEST_TIM15_CH1 40U /*!< GPDMA1 HW request is TIM15_CH1 */ +#define GPDMA1_REQUEST_TIM15_CH2 41U /*!< GPDMA1 HW request is TIM15_CH2 */ +#define GPDMA1_REQUEST_TIM15_UP 42U /*!< GPDMA1 HW request is TIM15_UP */ +#define GPDMA1_REQUEST_TIM15_TRIG 43U /*!< GPDMA1 HW request is TIM15_TRIG */ +#define GPDMA1_REQUEST_TIM15_COM 44U /*!< GPDMA1 HW request is TIM15_COM */ +#define GPDMA1_REQUEST_TIM16_CH1 45U /*!< GPDMA1 HW request is TIM16_CH1 */ +#define GPDMA1_REQUEST_TIM16_UP 46U /*!< GPDMA1 HW request is TIM16_UP */ +#define GPDMA1_REQUEST_TIM16_COM 47U /*!< GPDMA1 HW request is TIM16_COM */ +#define GPDMA1_REQUEST_TIM17_CH1 48U /*!< GPDMA1 HW request is TIM17_CH1 */ +#define GPDMA1_REQUEST_TIM17_UP 49U /*!< GPDMA1 HW request is TIM17_UP */ +#define GPDMA1_REQUEST_TIM17_COM 50U /*!< GPDMA1 HW request is TIM17_COM */ +#define GPDMA1_REQUEST_SPI1_RX 51U /*!< GPDMA1 HW request is SPI1_RX */ +#define GPDMA1_REQUEST_SPI1_TX 52U /*!< GPDMA1 HW request is SPI1_TX */ +#define GPDMA1_REQUEST_SPI2_RX 53U /*!< GPDMA1 HW request is SPI2_RX */ +#define GPDMA1_REQUEST_SPI2_TX 54U /*!< GPDMA1 HW request is SPI2_TX */ +#define GPDMA1_REQUEST_SPI3_RX 55U /*!< GPDMA1 HW request is SPI3_RX */ +#define GPDMA1_REQUEST_SPI3_TX 56U /*!< GPDMA1 HW request is SPI3_TX */ +#define GPDMA1_REQUEST_SPI4_RX 57U /*!< GPDMA1 HW request is SPI4_RX */ +#define GPDMA1_REQUEST_SPI4_TX 58U /*!< GPDMA1 HW request is SPI4_TX */ +#define GPDMA1_REQUEST_SPI5_RX 59U /*!< GPDMA1 HW request is SPI5_RX */ +#define GPDMA1_REQUEST_SPI5_TX 60U /*!< GPDMA1 HW request is SPI5_TX */ +#define GPDMA1_REQUEST_SPI6_RX 61U /*!< GPDMA1 HW request is SPI6_RX */ +#define GPDMA1_REQUEST_SPI6_TX 62U /*!< GPDMA1 HW request is SPI6_TX */ +#define GPDMA1_REQUEST_SAI1_A 63U /*!< GPDMA1 HW request is SAI1_A */ +#define GPDMA1_REQUEST_SAI1_B 64U /*!< GPDMA1 HW request is SAI1_B */ +#define GPDMA1_REQUEST_SAI2_A 65U /*!< GPDMA1 HW request is SAI2_A */ +#define GPDMA1_REQUEST_SAI2_B 66U /*!< GPDMA1 HW request is SAI2_B */ +#define GPDMA1_REQUEST_I2C1_RX 67U /*!< GPDMA1 HW request is I2C1_RX */ +#define GPDMA1_REQUEST_I2C1_TX 68U /*!< GPDMA1 HW request is I2C1_TX */ +#define GPDMA1_REQUEST_I2C2_RX 69U /*!< GPDMA1 HW request is I2C2_RX */ +#define GPDMA1_REQUEST_I2C2_TX 70U /*!< GPDMA1 HW request is I2C2_TX */ +#define GPDMA1_REQUEST_I2C3_RX 71U /*!< GPDMA1 HW request is I2C3_RX */ +#define GPDMA1_REQUEST_I2C3_TX 72U /*!< GPDMA1 HW request is I2C3_TX */ +#define GPDMA1_REQUEST_USART1_RX 73U /*!< GPDMA1 HW request is USART1_RX */ +#define GPDMA1_REQUEST_USART1_TX 74U /*!< GPDMA1 HW request is USART1_TX */ +#define GPDMA1_REQUEST_USART2_RX 75U /*!< GPDMA1 HW request is USART2_RX */ +#define GPDMA1_REQUEST_USART2_TX 76U /*!< GPDMA1 HW request is USART2_TX */ +#define GPDMA1_REQUEST_USART3_RX 77U /*!< GPDMA1 HW request is USART3_RX */ +#define GPDMA1_REQUEST_USART3_TX 78U /*!< GPDMA1 HW request is USART3_TX */ +#define GPDMA1_REQUEST_UART4_RX 79U /*!< GPDMA1 HW request is UART4_RX */ +#define GPDMA1_REQUEST_UART4_TX 80U /*!< GPDMA1 HW request is UART4_TX */ +#define GPDMA1_REQUEST_UART5_RX 81U /*!< GPDMA1 HW request is UART5_RX */ +#define GPDMA1_REQUEST_UART5_TX 82U /*!< GPDMA1 HW request is UART5_TX */ +#define GPDMA1_REQUEST_UART7_RX 83U /*!< GPDMA1 HW request is UART7_RX */ +#define GPDMA1_REQUEST_UART7_TX 84U /*!< GPDMA1 HW request is UART7_TX */ +#define GPDMA1_REQUEST_UART8_RX 85U /*!< GPDMA1 HW request is UART8_RX */ +#define GPDMA1_REQUEST_UART8_TX 86U /*!< GPDMA1 HW request is UART8_TX */ +#define GPDMA1_REQUEST_CORDIC_READ 87U /*!< GPDMA1 HW request is CORDIC_READ */ +#define GPDMA1_REQUEST_CORDIC_WRITE 88U /*!< GPDMA1 HW request is CORDIC_WRITE */ +#define GPDMA1_REQUEST_LPTIM1_IC1 89U /*!< GPDMA1 HW request is LPTIM1_IC1 */ +#define GPDMA1_REQUEST_LPTIM1_IC2 90U /*!< GPDMA1 HW request is LPTIM1_IC2 */ +#define GPDMA1_REQUEST_LPTIM1_UE 91U /*!< GPDMA1 HW request is LPTIM1_UE */ +#define GPDMA1_REQUEST_LPTIM2_IC1 92U /*!< GPDMA1 HW request is LPTIM2_IC1 */ +#define GPDMA1_REQUEST_LPTIM2_IC2 93U /*!< GPDMA1 HW request is LPTIM2_IC2 */ +#define GPDMA1_REQUEST_LPTIM2_UE 94U /*!< GPDMA1 HW request is LPTIM2_UE */ +#define GPDMA1_REQUEST_SPDIF_RX_DT 95U /*!< GPDMA1 HW request is SPDIF_RX_DT */ +#define GPDMA1_REQUEST_SPDIF_RX_CS 96U /*!< GPDMA1 HW request is SPDIF_RX_CS */ +#define GPDMA1_REQUEST_ADF1_FLT0 97U /*!< GPDMA1 HW request is ADF1_FLT0 */ +#define GPDMA1_REQUEST_UCPD1_TX 98U /*!< GPDMA1 HW request is UCPD1_TX */ +#define GPDMA1_REQUEST_UCPD1_RX 99U /*!< GPDMA1 HW request is UCPD1_RX */ +#define GPDMA1_REQUEST_PSSI 100U /*!< GPDMA1 HW request is PSSI */ +#define GPDMA1_REQUEST_LPUART1_RX 101U /*!< GPDMA1 HW request is LPUART1_RX */ +#define GPDMA1_REQUEST_LPUART1_TX 102U /*!< GPDMA1 HW request is LPUART1_TX */ +#define GPDMA1_REQUEST_LPTIM3_IC1 103U /*!< GPDMA1 HW request is LPTIM3_IC1 */ +#define GPDMA1_REQUEST_LPTIM3_IC2 104U /*!< GPDMA1 HW request is LPTIM3_IC2 */ +#define GPDMA1_REQUEST_LPTIM3_UE 105U /*!< GPDMA1 HW request is LPTIM3_UE */ +#define GPDMA1_REQUEST_I3C1_RX 106U /*!< GPDMA1 HW request is I3C1_RX */ +#define GPDMA1_REQUEST_I3C1_TX 107U /*!< GPDMA1 HW request is I3C1_TX */ +#define GPDMA1_REQUEST_I3C1_TC 108U /*!< GPDMA1 HW request is I3C1_TC */ +#define GPDMA1_REQUEST_I3C1_RS 109U /*!< GPDMA1 HW request is I3C1_RS */ + +#define GPDMA1_MAX_REQUEST 109U + +/* Software request */ +#define DMA_REQUEST_SW DMA_CTR2_SWREQ /*!< DMA SW request */ +/** + * @} + */ + +/** @defgroup DMA_Block_Request DMA Block Request + * @brief DMA Block Request + * @{ + */ +#define DMA_BREQ_SINGLE_BURST 0x00000000U /*!< Hardware request protocol at a single / burst level */ +#define DMA_BREQ_BLOCK DMA_CTR2_BREQ /*!< Hardware request protocol at a block level */ +/** + * @} + */ + +/** @defgroup DMA_Transfer_Direction DMA Transfer Direction + * @brief DMA transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH DMA_CTR2_DREQ /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY DMA_CTR2_SWREQ /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Source_Increment_Mode DMA Source Increment Mode + * @brief DMA Source Increment Mode + * @{ + */ +#define DMA_SINC_FIXED 0x00000000U /*!< Source fixed single / burst */ +#define DMA_SINC_INCREMENTED DMA_CTR1_SINC /*!< Source incremented single / burst */ +/** + * @} + */ + +/** @defgroup DMA_Destination_Increment_Mode DMA Destination Increment Mode + * @brief DMA Destination Increment Mode + * @{ + */ +#define DMA_DINC_FIXED 0x00000000U /*!< Destination fixed single / burst */ +#define DMA_DINC_INCREMENTED DMA_CTR1_DINC /*!< Destination incremented single / burst */ +/** + * @} + */ + +/** @defgroup DMA_Source_Data_Width DMA Source Data Width + * @brief DMA Source Data Width + * @{ + */ +#define DMA_SRC_DATAWIDTH_BYTE 0x00000000U /*!< Source data width : Byte */ +#define DMA_SRC_DATAWIDTH_HALFWORD DMA_CTR1_SDW_LOG2_0 /*!< Source data width : HalfWord */ +#define DMA_SRC_DATAWIDTH_WORD DMA_CTR1_SDW_LOG2_1 /*!< Source data width : Word */ +#define DMA_SRC_DATAWIDTH_DOUBLEWORD DMA_CTR1_SDW_LOG2 /*!< Source data width : DoubleWord */ +/** + * @} + */ + +/** @defgroup DMA_Destination_Data_Width DMA destination Data Width + * @brief DMA destination Data Width + * @{ + */ +#define DMA_DEST_DATAWIDTH_BYTE 0x00000000U /*!< Destination data width : Byte */ +#define DMA_DEST_DATAWIDTH_HALFWORD DMA_CTR1_DDW_LOG2_0 /*!< Destination data width : HalfWord */ +#define DMA_DEST_DATAWIDTH_WORD DMA_CTR1_DDW_LOG2_1 /*!< Destination data width : Word */ +#define DMA_DEST_DATAWIDTH_DOUBLEWORD DMA_CTR1_DDW_LOG2 /*!< Destination data width : DoubleWord */ + +/** + * @} + */ + +/** @defgroup DMA_Priority_Level DMA Priority Level + * @brief DMA Priority Level + * @{ + */ +#define DMA_LOW_PRIORITY_LOW_WEIGHT 0x00000000U /*!< Priority level : Low Priority, Low weight */ +#define DMA_LOW_PRIORITY_MID_WEIGHT DMA_CCR_PRIO_0 /*!< Priority level : Low Priority, Mid weight */ +#define DMA_LOW_PRIORITY_HIGH_WEIGHT DMA_CCR_PRIO_1 /*!< Priority level : Low Priority, High weight */ +#define DMA_HIGH_PRIORITY DMA_CCR_PRIO /*!< Priority level : HIGH Priority */ +/** + * @} + */ + +/** @defgroup DMA_Transfer_Allocated_Port DMA Transfer Allocated Port + * @brief DMA Transfer Allocated Port + * @{ + */ +#define DMA_SRC_ALLOCATED_PORT0 0x00000000U /*!< Source allocated Port 0 */ +#define DMA_SRC_ALLOCATED_PORT1 DMA_CTR1_SAP /*!< Source allocated Port 1 */ +#define DMA_DEST_ALLOCATED_PORT0 0x00000000U /*!< Destination allocated Port 0 */ +#define DMA_DEST_ALLOCATED_PORT1 DMA_CTR1_DAP /*!< Destination allocated Port 1 */ +/** + * @} + */ + +/** @defgroup DMA_Transfer_Event_Mode DMA Transfer Event Mode + * @brief DMA Transfer Event Mode + * @{ + */ +#define DMA_TCEM_BLOCK_TRANSFER 0x00000000U /*!< The TC event is generated at the end of each block and the + HT event is generated at the half of each block */ +#define DMA_TCEM_REPEATED_BLOCK_TRANSFER DMA_CTR2_TCEM_0 /*!< The TC event is generated at the end of the repeated block + and the HT event is generated at the half of the repeated + block */ +#define DMA_TCEM_EACH_LL_ITEM_TRANSFER DMA_CTR2_TCEM_1 /*!< The TC event is generated at the end of each linked-list + item and the HT event is generated at the half of each + linked-list item */ +#define DMA_TCEM_LAST_LL_ITEM_TRANSFER DMA_CTR2_TCEM /*!< The TC event is generated at the end of the last + linked-list item and the HT event is generated at the half + of the last linked-list item */ +/** + * @} + */ + +/** @defgroup DMA_Transfer_Mode DMA Transfer Mode + * @brief DMA Transfer Mode + * @{ + */ +#define DMA_NORMAL (0x00U) /*!< Normal DMA transfer */ +#define DMA_PFCTRL DMA_CTR2_PFREQ /*!< HW request peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_Channel_Attributes DMA Channel Attributes + * @brief DMA Channel Privilege Attribute + * @{ + */ + + +#define DMA_CHANNEL_PRIV (DMA_CHANNEL_ATTR_PRIV_MASK | (1U<State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ : DMA handle. + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) \ + ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ : DMA handle. + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) \ + ((__HANDLE__)->Instance->CCR |= (DMA_CCR_SUSP | DMA_CCR_RESET)) + +/** + * @brief Get the DMA channel pending flags. + * @param __HANDLE__ : DMA handle. + * @param __FLAG__ : Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TC : Transfer Complete flag. + * @arg DMA_FLAG_HT : Half Transfer Complete flag. + * @arg DMA_FLAG_DTE : Data Transfer Error flag. + * @arg DMA_FLAG_ULE : Update linked-list Error flag. + * @arg DMA_FLAG_USE : User Setting Error flag. + * @arg DMA_FLAG_TO : Trigger Overrun flag. + * @arg DMA_FLAG_SUSP : Completed Suspension flag. + * @arg DMA_FLAG_IDLEF : Idle flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->CSR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ : DMA handle. + * @param __FLAG__ : Specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TC : Transfer Complete flag. + * @arg DMA_FLAG_HT : Half Transfer Complete flag. + * @arg DMA_FLAG_DTE : Data Transfer Error flag. + * @arg DMA_FLAG_ULE : Update Linked-List Error flag. + * @arg DMA_FLAG_USE : User Setting Error flag. + * @arg DMA_FLAG_TO : Trigger Overrun flag. + * @arg DMA_FLAG_SUSP : Completed Suspension flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->CFCR = (__FLAG__)) + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ : DMA handle. + * @param __INTERRUPT__ : Specifies the DMA interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC : Transfer Complete interrupt. + * @arg DMA_IT_HT : Half Transfer Complete interrupt. + * @arg DMA_IT_DTE : Data Transfer Error interrupt. + * @arg DMA_IT_ULE : Update Linked-List Error interrupt. + * @arg DMA_IT_USE : User Setting Error interrupt. + * @arg DMA_IT_TO : Trigger Overrun interrupt. + * @arg DMA_IT_SUSP : Completed Suspension interrupt. + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ : DMA handle. + * @param __INTERRUPT__ : specifies the DMA interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC : Transfer Complete interrupt. + * @arg DMA_IT_HT : Half Transfer Complete interrupt. + * @arg DMA_IT_DTE : Data Transfer Error interrupt. + * @arg DMA_IT_ULE : Update Linked-List Error interrupt. + * @arg DMA_IT_USE : User Setting Error interrupt. + * @arg DMA_IT_TO : Trigger Overrun interrupt. + * @arg DMA_IT_SUSP : Completed Suspension interrupt. + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__ : DMA handle. + * @param __INTERRUPT__ : specifies the DMA interrupt source to check. + * @arg DMA_IT_TC : Transfer Complete interrupt. + * @arg DMA_IT_HT : Half Transfer Complete interrupt. + * @arg DMA_IT_DTE : Data Transfer Error interrupt. + * @arg DMA_IT_ULE : Update Linked-List Error interrupt. + * @arg DMA_IT_USE : User Setting Error interrupt. + * @arg DMA_IT_TO : Trigger Overrun interrupt. + * @arg DMA_IT_SUSP : Completed Suspension interrupt. + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Writes the block number of bytes to be transferred from the source on the DMA Channel. + * @param __HANDLE__ : DMA handle. + * @param __COUNTER__ : Number of data bytes to be transferred from the source (from 0 to 65535). + */ +#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) \ + MODIFY_REG((__HANDLE__)->Instance->CBR1, DMA_CBR1_BNDT, (__COUNTER__)) + +/** + * @brief Returns the number of remaining data bytes in the current DMA Channel transfer. + * @param __HANDLE__ : DMA handle. + * @retval The number of remaining data units in the current DMA Stream transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) \ + (((__HANDLE__)->Instance->CBR1) & DMA_CBR1_BNDT) +/** + * @} + */ + + +/* Include DMA HAL Extension module */ +#include "stm32h7rsxx_hal_dma_ex.h" + + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @brief DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @brief Initialization and De-Initialization Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *const hdma); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 I/O Operation Functions + * @brief I/O Operation Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *const hdma, + HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *const hdma, + HAL_DMA_CallbackIDTypeDef CallbackID, + void (*const pCallback)(DMA_HandleTypeDef *const _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *const hdma, + HAL_DMA_CallbackIDTypeDef CallbackID); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 State and Error Functions + * @brief State and Error Functions + * @{ + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef const *const hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef const *const hdma); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group4 DMA Attributes Functions + * @brief DMA Attributes Functions + * @{ + */ + +HAL_StatusTypeDef HAL_DMA_ConfigChannelAttributes(DMA_HandleTypeDef *const hdma, + uint32_t ChannelAttributes); +HAL_StatusTypeDef HAL_DMA_GetConfigChannelAttributes(DMA_HandleTypeDef const *const hdma, + uint32_t *const pChannelAttributes); + +HAL_StatusTypeDef HAL_DMA_LockChannelAttributes(DMA_HandleTypeDef const *const hdma); +HAL_StatusTypeDef HAL_DMA_GetLockChannelAttributes(DMA_HandleTypeDef const *const hdma, + uint32_t *const pLockState); + + +/** + * @} + */ + +/** + * @} + */ + + +/* Private constants -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Private_Constants DMA Private Constants + * @brief DMA Private Constants + * @{ + */ +#define HAL_TIMEOUT_DMA_ABORT (0x00000005U) /* DMA channel abort timeout 5 milli-second */ +#define HAL_DMA_CHANNEL_START (0x00000050U) /* DMA channel offset */ +#define HAL_DMA_CHANNEL_SIZE (0x00000080U) /* DMA channel size */ +#define HAL_DMA_OFFSET_MASK (0x00000FFFU) /* DMA channel offset mask */ +#define DMA_CHANNEL_ATTR_PRIV_MASK (0x01000000U) /* DMA channel privilege */ +#define DMA_CHANNEL_PRIV_VAL_POS 0U +#define DMA_CHANNEL_BURST_MIN (0x00000001U) /* DMA channel minimum burst size */ +#define DMA_CHANNEL_BURST_MAX (0x00000040U) /* DMA channel maximum burst size */ +/** + * @} + */ + + +/* Private macros ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @brief DMA Private Macros + * @{ + */ +#define GET_DMA_INSTANCE(__HANDLE__) \ + ((DMA_TypeDef *)((uint32_t)((__HANDLE__)->Instance) & (~HAL_DMA_OFFSET_MASK))) + +#define GET_DMA_CHANNEL(__HANDLE__) \ + ((((uint32_t)((__HANDLE__)->Instance) & HAL_DMA_OFFSET_MASK) - HAL_DMA_CHANNEL_START) / HAL_DMA_CHANNEL_SIZE) + +#define IS_DMA_MODE(MODE) \ + (((MODE) == DMA_NORMAL) || \ + ((MODE) == DMA_PFCTRL)) + +#define IS_DMA_DIRECTION(DIRECTION) \ + (((DIRECTION) == DMA_PERIPH_TO_MEMORY) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_LEVEL_COMPLETE(LEVEL) \ + (((LEVEL) == HAL_DMA_FULL_TRANSFER) || \ + ((LEVEL) == HAL_DMA_HALF_TRANSFER)) + +#define IS_DMA_SOURCE_INC(INC) \ + (((INC) == DMA_SINC_FIXED) || \ + ((INC) == DMA_SINC_INCREMENTED)) + +#define IS_DMA_DESTINATION_INC(INC) \ + (((INC) == DMA_DINC_FIXED) || \ + ((INC) == DMA_DINC_INCREMENTED)) + +#define IS_DMA_SOURCE_DATA_WIDTH(WIDTH) \ + (((WIDTH) == DMA_SRC_DATAWIDTH_BYTE) || \ + ((WIDTH) == DMA_SRC_DATAWIDTH_HALFWORD) || \ + ((WIDTH) == DMA_SRC_DATAWIDTH_WORD) || \ + ((WIDTH) == DMA_SRC_DATAWIDTH_DOUBLEWORD)) + +#define IS_DMA_DESTINATION_DATA_WIDTH(WIDTH) \ + (((WIDTH) == DMA_DEST_DATAWIDTH_BYTE) || \ + ((WIDTH) == DMA_DEST_DATAWIDTH_HALFWORD) || \ + ((WIDTH) == DMA_DEST_DATAWIDTH_WORD) || \ + ((WIDTH) == DMA_DEST_DATAWIDTH_DOUBLEWORD)) + +#define IS_DMA_BURST_LENGTH(LENGTH) \ + (((LENGTH) >= DMA_CHANNEL_BURST_MIN) && \ + ((LENGTH) <= DMA_CHANNEL_BURST_MAX)) + +#define IS_DMA_PRIORITY(PRIORITY) \ + (((PRIORITY) == DMA_LOW_PRIORITY_LOW_WEIGHT) || \ + ((PRIORITY) == DMA_LOW_PRIORITY_MID_WEIGHT) || \ + ((PRIORITY) == DMA_LOW_PRIORITY_HIGH_WEIGHT) || \ + ((PRIORITY) == DMA_HIGH_PRIORITY)) + +#define IS_DMA_TRANSFER_ALLOCATED_PORT(ALLOCATED_PORT) \ + (((ALLOCATED_PORT) & (~(DMA_CTR1_SAP | DMA_CTR1_DAP))) == 0U) + +#define IS_DMA_REQUEST(REQUEST) \ + (((REQUEST) == DMA_REQUEST_SW) || \ + ((REQUEST) <= GPDMA1_REQUEST_I3C1_RS)) + +#define IS_DMA_BLOCK_HW_REQUEST(MODE) \ + (((MODE) == DMA_BREQ_SINGLE_BURST) || \ + ((MODE) == DMA_BREQ_BLOCK)) + +#define IS_DMA_TCEM_EVENT_MODE(MODE) \ + (((MODE) == DMA_TCEM_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TCEM_REPEATED_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TCEM_EACH_LL_ITEM_TRANSFER) || \ + ((MODE) == DMA_TCEM_LAST_LL_ITEM_TRANSFER)) + +#define IS_DMA_BLOCK_SIZE(SIZE) \ + (((SIZE) > 0U) && ((SIZE) <= DMA_CBR1_BNDT)) + +#define IS_DMA_GLOBAL_ACTIVE_FLAG(INSTANCE, GLOBAL_FLAG) \ + (((INSTANCE)->MISR & (GLOBAL_FLAG))) +#define IS_DMA_ATTRIBUTES(ATTRIBUTE) \ + (((ATTRIBUTE) == DMA_CHANNEL_PRIV) || \ + ((ATTRIBUTE) == DMA_CHANNEL_NPRIV)) + +/** + * @} + */ + + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @brief DMA Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_DMA_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma2d.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma2d.h new file mode 100644 index 000000000..087e96ac1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma2d.h @@ -0,0 +1,715 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_dma2d.h + * @author MCD Application Team + * @brief Header file of DMA2D HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_DMA2D_H +#define STM32H7RSxx_HAL_DMA2D_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (DMA2D) + +/** @addtogroup DMA2D DMA2D + * @brief DMA2D HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA2D_Exported_Types DMA2D Exported Types + * @{ + */ +#define MAX_DMA2D_LAYER 2U /*!< DMA2D maximum number of layers */ + +/** + * @brief DMA2D CLUT Structure definition + */ +typedef struct +{ + uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/ + + uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode. + This parameter can be one value of @ref DMA2D_CLUT_CM. */ + + uint32_t Size; /*!< Configures the DMA2D CLUT size. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ +} DMA2D_CLUTCfgTypeDef; + +/** + * @brief DMA2D Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Configures the DMA2D transfer mode. + This parameter can be one value of @ref DMA2D_Mode. */ + + uint32_t ColorMode; /*!< Configures the color format of the output image. + This parameter can be one value of @ref DMA2D_Output_Color_Mode. */ + + uint32_t OutputOffset; /*!< Specifies the Offset value. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x3FFF. */ + uint32_t AlphaInverted; /*!< Select regular or inverted alpha value for the output pixel format converter. + This parameter can be one value of @ref DMA2D_Alpha_Inverted. */ + + uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR) + for the output pixel format converter. + This parameter can be one value of @ref DMA2D_RB_Swap. */ + + + uint32_t BytesSwap; /*!< Select byte regular mode or bytes swap mode (two by two). + This parameter can be one value of @ref DMA2D_Bytes_Swap. */ + + uint32_t LineOffsetMode; /*!< Configures how is expressed the line offset for the foreground, background and output. + This parameter can be one value of @ref DMA2D_Line_Offset_Mode. */ + +} DMA2D_InitTypeDef; + + +/** + * @brief DMA2D Layer structure definition + */ +typedef struct +{ + uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x3FFF. */ + + uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode. + This parameter can be one value of @ref DMA2D_Input_Color_Mode. */ + + uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode. + This parameter can be one value of @ref DMA2D_Alpha_Mode. */ + + uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value + in case of A8 or A4 color mode. + This parameter must be a number between Min_Data = 0x00 + and Max_Data = 0xFF except for the color modes detailed below. + @note In case of A8 or A4 color mode (ARGB), + this parameter must be a number between + Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where + - InputAlpha[24:31] is the alpha value ALPHA[0:7] + - InputAlpha[16:23] is the red value RED[0:7] + - InputAlpha[8:15] is the green value GREEN[0:7] + - InputAlpha[0:7] is the blue value BLUE[0:7]. */ + uint32_t AlphaInverted; /*!< Select regular or inverted alpha value. + This parameter can be one value of @ref DMA2D_Alpha_Inverted. */ + + uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR). + This parameter can be one value of @ref DMA2D_RB_Swap. */ + + uint32_t ChromaSubSampling; /*!< Configure the chroma sub-sampling mode for the YCbCr color mode + This parameter can be one value of @ref DMA2D_Chroma_Sub_Sampling */ + +} DMA2D_LayerCfgTypeDef; + +/** + * @brief HAL DMA2D State structures definition + */ +typedef enum +{ + HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */ + HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */ + HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */ +} HAL_DMA2D_StateTypeDef; + +/** + * @brief DMA2D handle Structure definition + */ +typedef struct __DMA2D_HandleTypeDef +{ + DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */ + + DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */ + + void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer complete callback. */ + + void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer error callback. */ + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + void (* LineEventCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D line event callback. */ + + void (* CLUTLoadingCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D CLUT loading completion callback */ + + void (* MspInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp Init callback. */ + + void (* MspDeInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp DeInit callback. */ + +#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ + + DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */ + + HAL_LockTypeDef Lock; /*!< DMA2D lock. */ + + __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */ + + __IO uint32_t ErrorCode; /*!< DMA2D error code. */ +} DMA2D_HandleTypeDef; + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DMA2D Callback pointer definition + */ +typedef void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef *hdma2d); /*!< Pointer to a DMA2D common callback function */ +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants + * @{ + */ + +/** @defgroup DMA2D_Error_Code DMA2D Error Code + * @{ + */ +#define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */ +#define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */ +#define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U /*!< Invalid callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DMA2D_Mode DMA2D Mode + * @{ + */ +#define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ +#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ +#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ +#define DMA2D_R2M (DMA2D_CR_MODE_1 | DMA2D_CR_MODE_0) /*!< DMA2D register to memory transfer mode */ +#define DMA2D_M2M_BLEND_FG DMA2D_CR_MODE_2 /*!< DMA2D memory to memory with blending transfer mode and fixed color FG */ +#define DMA2D_M2M_BLEND_BG (DMA2D_CR_MODE_2 | DMA2D_CR_MODE_0) /*!< DMA2D memory to memory with blending transfer mode and fixed color BG */ +/** + * @} + */ + +/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode + * @{ + */ +#define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */ +#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */ +#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */ +#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */ +#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */ +/** + * @} + */ + +/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode + * @{ + */ +#define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */ +#define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */ +#define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */ +#define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */ +#define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */ +#define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */ +#define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */ +#define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */ +#define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */ +#define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */ +#define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */ +#define DMA2D_INPUT_YCBCR 0x0000000BU /*!< YCbCr color mode */ +/** + * @} + */ + +/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode + * @{ + */ +#define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */ +#define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */ +#define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value + with original alpha channel value */ +/** + * @} + */ + +/** @defgroup DMA2D_Alpha_Inverted DMA2D Alpha Inversion + * @{ + */ +#define DMA2D_REGULAR_ALPHA 0x00000000U /*!< No modification of the alpha channel value */ +#define DMA2D_INVERTED_ALPHA 0x00000001U /*!< Invert the alpha channel value */ +/** + * @} + */ + +/** @defgroup DMA2D_RB_Swap DMA2D Red and Blue Swap + * @{ + */ +#define DMA2D_RB_REGULAR 0x00000000U /*!< Select regular mode (RGB or ARGB) */ +#define DMA2D_RB_SWAP 0x00000001U /*!< Select swap mode (BGR or ABGR) */ +/** + * @} + */ + + + +/** @defgroup DMA2D_Line_Offset_Mode DMA2D Line Offset Mode + * @{ + */ +#define DMA2D_LOM_PIXELS 0x00000000U /*!< Line offsets expressed in pixels */ +#define DMA2D_LOM_BYTES DMA2D_CR_LOM /*!< Line offsets expressed in bytes */ +/** + * @} + */ + +/** @defgroup DMA2D_Bytes_Swap DMA2D Bytes Swap + * @{ + */ +#define DMA2D_BYTES_REGULAR 0x00000000U /*!< Bytes in regular order in output FIFO */ +#define DMA2D_BYTES_SWAP DMA2D_OPFCCR_SB /*!< Bytes are swapped two by two in output FIFO */ +/** + * @} + */ + +/** @defgroup DMA2D_Chroma_Sub_Sampling DMA2D Chroma Sub Sampling + * @{ + */ +#define DMA2D_NO_CSS 0x00000000U /*!< No chroma sub-sampling 4:4:4 */ +#define DMA2D_CSS_422 0x00000001U /*!< chroma sub-sampling 4:2:2 */ +#define DMA2D_CSS_420 0x00000002U /*!< chroma sub-sampling 4:2:0 */ +/** + * @} + */ + +/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode + * @{ + */ +#define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */ +#define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */ +/** + * @} + */ + +/** @defgroup DMA2D_Interrupts DMA2D Interrupts + * @{ + */ +#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ +#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ +#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ +#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ +#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ +#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ +/** + * @} + */ + +/** @defgroup DMA2D_Flags DMA2D Flags + * @{ + */ +#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ +#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ +#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ +#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ +#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ +#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ +/** + * @} + */ + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DMA2D common Callback ID enumeration definition + */ +typedef enum +{ + HAL_DMA2D_MSPINIT_CB_ID = 0x00U, /*!< DMA2D MspInit callback ID */ + HAL_DMA2D_MSPDEINIT_CB_ID = 0x01U, /*!< DMA2D MspDeInit callback ID */ + HAL_DMA2D_TRANSFERCOMPLETE_CB_ID = 0x02U, /*!< DMA2D transfer complete callback ID */ + HAL_DMA2D_TRANSFERERROR_CB_ID = 0x03U, /*!< DMA2D transfer error callback ID */ + HAL_DMA2D_LINEEVENT_CB_ID = 0x04U, /*!< DMA2D line event callback ID */ + HAL_DMA2D_CLUTLOADINGCPLT_CB_ID = 0x05U, /*!< DMA2D CLUT loading completion callback ID */ +} HAL_DMA2D_CallbackIDTypeDef; +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + + +/** + * @} + */ +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros + * @{ + */ + +/** @brief Reset DMA2D handle state + * @param __HANDLE__ specifies the DMA2D handle. + * @retval None + */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + }while(0) +#else +#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET) +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + + +/** + * @brief Enable the DMA2D. + * @param __HANDLE__ DMA2D handle + * @retval None. + */ +#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START) + + +/* Interrupt & Flag management */ +/** + * @brief Get the DMA2D pending flags. + * @param __HANDLE__ DMA2D handle + * @param __FLAG__ flag to check. + * This parameter can be any combination of the following values: + * @arg DMA2D_FLAG_CE: Configuration error flag + * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag + * @arg DMA2D_FLAG_CAE: CLUT access error flag + * @arg DMA2D_FLAG_TW: Transfer Watermark flag + * @arg DMA2D_FLAG_TC: Transfer complete flag + * @arg DMA2D_FLAG_TE: Transfer error flag + * @retval The state of FLAG. + */ +#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA2D pending flags. + * @param __HANDLE__ DMA2D handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA2D_FLAG_CE: Configuration error flag + * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag + * @arg DMA2D_FLAG_CAE: CLUT access error flag + * @arg DMA2D_FLAG_TW: Transfer Watermark flag + * @arg DMA2D_FLAG_TC: Transfer complete flag + * @arg DMA2D_FLAG_TE: Transfer error flag + * @retval None + */ +#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__)) + +/** + * @brief Enable the specified DMA2D interrupts. + * @param __HANDLE__ DMA2D handle + * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DMA2D_IT_CE: Configuration error interrupt mask + * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask + * @arg DMA2D_IT_CAE: CLUT access error interrupt mask + * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask + * @arg DMA2D_IT_TC: Transfer complete interrupt mask + * @arg DMA2D_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA2D interrupts. + * @param __HANDLE__ DMA2D handle + * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg DMA2D_IT_CE: Configuration error interrupt mask + * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask + * @arg DMA2D_IT_CAE: CLUT access error interrupt mask + * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask + * @arg DMA2D_IT_TC: Transfer complete interrupt mask + * @arg DMA2D_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA2D interrupt source is enabled or not. + * @param __HANDLE__ DMA2D handle + * @param __INTERRUPT__ specifies the DMA2D interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA2D_IT_CE: Configuration error interrupt mask + * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask + * @arg DMA2D_IT_CAE: CLUT access error interrupt mask + * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask + * @arg DMA2D_IT_TC: Transfer complete interrupt mask + * @arg DMA2D_IT_TE: Transfer error interrupt mask + * @retval The state of INTERRUPT source. + */ +#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions + * @{ + */ + +/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d); +void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d); +void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, + pDMA2D_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height); +HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height); +HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height); +HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height); +HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, const DMA2D_CLUTCfgTypeDef *CLUTCfg, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, const DMA2D_CLUTCfgTypeDef *CLUTCfg, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout); +void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d); +void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d); +void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d); + +/** + * @} + */ + +/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions *************************************************/ +HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line); +HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d); +HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime); + +/** + * @} + */ + +/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State functions ***************************************************/ +HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(const DMA2D_HandleTypeDef *hdma2d); +uint32_t HAL_DMA2D_GetError(const DMA2D_HandleTypeDef *hdma2d); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants + * @{ + */ + +/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark + * @{ + */ +#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */ +/** + * @} + */ + +/** @defgroup DMA2D_Color_Value DMA2D Color Value + * @{ + */ +#define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */ +/** + * @} + */ + +/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers + * @{ + */ +#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */ +/** + * @} + */ + +/** @defgroup DMA2D_Layers DMA2D Layers + * @{ + */ +#define DMA2D_BACKGROUND_LAYER 0x00000000U /*!< DMA2D Background Layer (layer 0) */ +#define DMA2D_FOREGROUND_LAYER 0x00000001U /*!< DMA2D Foreground Layer (layer 1) */ +/** + * @} + */ + +/** @defgroup DMA2D_Offset DMA2D Offset + * @{ + */ +#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< maximum Line Offset */ +/** + * @} + */ + +/** @defgroup DMA2D_Size DMA2D Size + * @{ + */ +#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D maximum number of pixels per line */ +#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D maximum number of lines */ +/** + * @} + */ + +/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size + * @{ + */ +#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D maximum CLUT size */ +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA2D_Private_Macros DMA2D Private Macros + * @{ + */ +#define IS_DMA2D_LAYER(LAYER) (((LAYER) == DMA2D_BACKGROUND_LAYER)\ + || ((LAYER) == DMA2D_FOREGROUND_LAYER)) + +#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \ + ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M) || \ + ((MODE) == DMA2D_M2M_BLEND_FG) || ((MODE) == DMA2D_M2M_BLEND_BG)) + +#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || \ + ((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \ + ((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || \ + ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \ + ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444)) + +#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE) +#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE) +#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL) +#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET) + +#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || \ + ((INPUT_CM) == DMA2D_INPUT_RGB888) || \ + ((INPUT_CM) == DMA2D_INPUT_RGB565) || \ + ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \ + ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || \ + ((INPUT_CM) == DMA2D_INPUT_L8) || \ + ((INPUT_CM) == DMA2D_INPUT_AL44) || \ + ((INPUT_CM) == DMA2D_INPUT_AL88) || \ + ((INPUT_CM) == DMA2D_INPUT_L4) || \ + ((INPUT_CM) == DMA2D_INPUT_A8) || \ + ((INPUT_CM) == DMA2D_INPUT_A4) || \ + ((INPUT_CM) == DMA2D_INPUT_YCBCR)) + +#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \ + ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \ + ((AlphaMode) == DMA2D_COMBINE_ALPHA)) + +#define IS_DMA2D_ALPHA_INVERTED(Alpha_Inverted) (((Alpha_Inverted) == DMA2D_REGULAR_ALPHA) || \ + ((Alpha_Inverted) == DMA2D_INVERTED_ALPHA)) + +#define IS_DMA2D_RB_SWAP(RB_Swap) (((RB_Swap) == DMA2D_RB_REGULAR) || \ + ((RB_Swap) == DMA2D_RB_SWAP)) + +#define IS_DMA2D_LOM_MODE(LOM) (((LOM) == DMA2D_LOM_PIXELS) || \ + ((LOM) == DMA2D_LOM_BYTES)) + +#define IS_DMA2D_BYTES_SWAP(BYTES_SWAP) (((BYTES_SWAP) == DMA2D_BYTES_REGULAR) || \ + ((BYTES_SWAP) == DMA2D_BYTES_SWAP)) + +#define IS_DMA2D_CHROMA_SUB_SAMPLING(CSS) (((CSS) == DMA2D_NO_CSS) || \ + ((CSS) == DMA2D_CSS_422) || \ + ((CSS) == DMA2D_CSS_420)) + +#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888)) +#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE) +#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX) +#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \ + ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \ + ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE)) +#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \ + ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \ + ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE)) +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (DMA2D) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_DMA2D_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma_ex.h new file mode 100644 index 000000000..96e0b4253 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dma_ex.h @@ -0,0 +1,719 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/ +#ifndef STM32H7RSxx_HAL_DMA_EX_H +#define STM32H7RSxx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @brief DMAEx Exported types + * @{ + */ + +/** + * @brief DMAEx Data Handling Configuration Structure Definition. + */ +typedef struct +{ + uint32_t DataExchange; /*!< Specifies the DMA channel data exchange mode. + This parameter can be a value of @ref DMAEx_Data_Exchange */ + + uint32_t DataAlignment; /*!< Specifies the DMA channel data padding and alignment mode + This parameter can be a value of @ref DMAEx_Data_Alignment */ + +} DMA_DataHandlingConfTypeDef; + +/** + * @brief DMAEx Trigger Configuration Structure Definition. + */ +typedef struct +{ + uint32_t TriggerMode; /*!< Specifies the DMA channel trigger mode. + This parameter can be a value of @ref DMAEx_Trigger_Mode */ + + uint32_t TriggerPolarity; /*!< Specifies the DMA channel trigger event polarity. + This parameter can be a value of @ref DMAEx_Trigger_Polarity */ + + uint32_t TriggerSelection; /*!< Specifies the DMA channel trigger event selection. + This parameter can be a value of @ref DMAEx_Trigger_Selection */ + +} DMA_TriggerConfTypeDef; + +/** + * @brief DMAEx Repeated Block Configuration Structure Definition. + */ +typedef struct +{ + uint32_t RepeatCount; /*!< Specifies the DMA channel repeat count (the number of repetitions of block). + This parameter can be a value between 1 and 2048 */ + + int32_t SrcAddrOffset; /*!< Specifies the DMA channel single/burst source address offset : + This parameter can be a value between -8191 and 8191. + * If source address offset > 0 => Increment the source address by offset from where + the last single/burst transfer ends. + * If source address offset < 0 => Decrement the source address by offset from where + the last single/burst transfer ends. + * If source address offset == 0 => The next single/burst source address starts from + where the last transfer ends */ + + int32_t DestAddrOffset; /*!< Specifies the DMA channel single/burst destination address offset signed value : + This parameter can be a value between -8191 and 8191. + * If destination address offset > 0 => Increment the destination address by offset + from where the last single/burst transfer ends. + * If destination address offset < 0 => Decrement the destination address by offset + from where the last single/burst transfer ends. + * If destination address offset == 0 => The next single/burst destination address + starts from where the last transfer ends. */ + + int32_t BlkSrcAddrOffset; /*!< Specifies the DMA channel block source address offset signed value : + This parameter can be a value between -65535 and 65535. + * If block source address offset > 0 => Increment the block source address by offset + from where the last block ends. + * If block source address offset < 0 => Decrement the next block source address by + offset from where the last block ends. + * If block source address offset == 0 => the next block source address starts from + where the last block ends */ + + int32_t BlkDestAddrOffset; /*!< Specifies the DMA channel block destination address offset signed value : + This parameter can be a value between -65535 and 65535. + * If block destination address offset > 0 => Increment the block destination address + by offset from where the last block ends. + * If block destination address offset < 0 => Decrement the next block destination + address by offset from where the last block ends. + * If block destination address offset == 0 => the next block destination address + starts from where the last block ends */ + +} DMA_RepeatBlockConfTypeDef; + +/** + * @brief DMAEx Queue State Enumeration Definition. + */ +typedef enum +{ + HAL_DMA_QUEUE_STATE_RESET = 0x00U, /*!< DMA queue empty */ + HAL_DMA_QUEUE_STATE_READY = 0x01U, /*!< DMA queue ready for use */ + HAL_DMA_QUEUE_STATE_BUSY = 0x02U /*!< DMA queue execution on going */ + +} HAL_DMA_QStateTypeDef; + +/** + * @brief DMAEx Linked-List Node Configuration Structure Definition. + */ +typedef struct +{ + uint32_t NodeType; /*!< Specifies the DMA channel node type. + This parameter can be a value of @ref DMAEx_Node_Type */ + + DMA_InitTypeDef Init; /*!< Specifies the DMA channel basic configuration */ + + DMA_DataHandlingConfTypeDef DataHandlingConfig; /*!< Specifies the DMA channel data handling channel configuration */ + + DMA_TriggerConfTypeDef TriggerConfig; /*!< Specifies the DMA channel trigger configuration */ + + DMA_RepeatBlockConfTypeDef RepeatBlockConfig; /*!< Specifies the DMA channel repeated block configuration */ + + uint32_t SrcAddress; /*!< Specifies the source memory address */ + uint32_t DstAddress; /*!< Specifies the destination memory address */ + uint32_t DataSize; /*!< Specifies the source data size in bytes */ + +} DMA_NodeConfTypeDef; + +/** + * @brief DMAEx Linked-List Node Structure Definition. + */ +typedef struct +{ + uint32_t LinkRegisters[8U]; /*!< Physical Node register description */ + uint32_t NodeInfo; /*!< Node information */ + +} DMA_NodeTypeDef; + +/** + * @brief DMAEx Linked-List Queue Structure Definition. + */ +typedef struct __DMA_QListTypeDef +{ + DMA_NodeTypeDef *Head; /*!< Specifies the queue head node */ + + DMA_NodeTypeDef *FirstCircularNode; /*!< Specifies the queue first circular node */ + + uint32_t NodeNumber; /*!< Specifies the queue node number */ + + __IO HAL_DMA_QStateTypeDef State; /*!< Specifies the queue state */ + + __IO uint32_t ErrorCode; /*!< Specifies the queue error code */ + + __IO uint32_t Type; /*!< Specifies whether the queue is static or dynamic */ + +} DMA_QListTypeDef; +/** + * @} + */ + +/* Exported constants ------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @brief DMAEx Exported Constants + * @{ + */ + +/** @defgroup Queue_Error_Codes Queue Error Codes + * @brief Queue Error Codes + * @{ + */ +#define HAL_DMA_QUEUE_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_DMA_QUEUE_ERROR_BUSY (0x01U) /*!< Error busy */ +#define HAL_DMA_QUEUE_ERROR_EMPTY (0x02U) /*!< Error unallowed operation for empty queue */ +#define HAL_DMA_QUEUE_ERROR_UNSUPPORTED (0x03U) /*!< Error unsupported feature */ +#define HAL_DMA_QUEUE_ERROR_INVALIDTYPE (0x04U) /*!< Error incompatible node type or circular initialization + and queue circular types are incompatible */ +#define HAL_DMA_QUEUE_ERROR_OUTOFRANGE (0x05U) /*!< Error out of range node memory */ +#define HAL_DMA_QUEUE_ERROR_NOTFOUND (0x06U) /*!< Error node not found in queue */ +/** + * @} + */ + +/** @defgroup DMAEx_LinkedList_Mode DMAEx LinkedList Mode + * @brief DMAEx LinkedList Mode + * @{ + */ +#define DMA_LINKEDLIST_NORMAL DMA_LINKEDLIST /*!< Linear linked-list DMA channel transfer */ +#define DMA_LINKEDLIST_CIRCULAR (DMA_LINKEDLIST | (0x01U)) /*!< Circular linked-list DMA channel transfer */ +/** + * @} + */ + +/** @defgroup DMAEx_Data_Alignment DMAEx Data Alignment + * @brief DMAEx Data Alignment + * @{ + */ +#define DMA_DATA_RIGHTALIGN_ZEROPADDED 0x00000000U /*!< If source data width < destination data width + => Right aligned padded with 0 up to destination data + width */ +#define DMA_DATA_RIGHTALIGN_LEFTTRUNC 0x00000000U /*!< If source data width > destination data width + => Right aligned left Truncated down to destination + data width */ +#define DMA_DATA_RIGHTALIGN_SIGNEXT DMA_CTR1_PAM_0 /*!< If source data width < destination data width + => Right Aligned padded with sign extended up to + destination data width */ +#define DMA_DATA_LEFTALIGN_RIGHTTRUNC DMA_CTR1_PAM_0 /*!< If source data width > destination data width + => Left Aligned Right Truncated down to the + destination data width */ +#define DMA_DATA_PACK DMA_CTR1_PAM_1 /*!< If source data width < destination data width + => Packed at the destination data width */ +#define DMA_DATA_UNPACK DMA_CTR1_PAM_1 /*!< If source data width > destination data width + => Unpacked at the destination data width */ +/** + * @} + */ + +/** @defgroup DMAEx_Data_Exchange DMAEx Data Exchange + * @brief DMAEx Data Exchange + * @{ + */ +#define DMA_EXCHANGE_NONE 0x00000000U /*!< No data exchange */ +#define DMA_EXCHANGE_DEST_BYTE DMA_CTR1_DBX /*!< Destination Byte exchange when destination data width is > Byte */ +#define DMA_EXCHANGE_DEST_HALFWORD DMA_CTR1_DHX /*!< Destination Half-Word exchange when destination data width is > Half-Word */ +#define DMA_EXCHANGE_SRC_BYTE DMA_CTR1_SBX /*!< Source Byte endianness exchange when source data width is word */ +#define DMA_EXCHANGE_DEST_WORD DMA_CTR1_DWX /*!< Destination Word exchange when destination data width is > Word */ +/** + * @} + */ + +/** @defgroup DMAEx_Trigger_Polarity DMAEx Trigger Polarity + * @brief DMAEx Trigger Polarity + * @{ + */ +#define DMA_TRIG_POLARITY_MASKED 0x00000000U /*!< No trigger of the selected DMA request. Masked trigger event */ +#define DMA_TRIG_POLARITY_RISING DMA_CTR2_TRIGPOL_0 /*!< Trigger of the selected DMA request on the rising edge of the selected trigger event input */ +#define DMA_TRIG_POLARITY_FALLING DMA_CTR2_TRIGPOL_1 /*!< Trigger of the selected DMA request on the falling edge of the selected trigger event input */ +/** + * @} + */ + +/** @defgroup DMAEx_Trigger_Mode DMAEx Trigger Mode + * @brief DMAEx Trigger Mode + * @{ + */ +#define DMA_TRIGM_BLOCK_TRANSFER 0x00000000U /*!< A block transfer is conditioned by (at least) one hit trigger */ +#define DMA_TRIGM_REPEATED_BLOCK_TRANSFER DMA_CTR2_TRIGM_0 /*!< A repeated block transfer is conditioned by (at least) one hit trigger */ +#define DMA_TRIGM_LLI_LINK_TRANSFER DMA_CTR2_TRIGM_1 /*!< A LLI link transfer is conditioned by (at least) one hit trigger */ +#define DMA_TRIGM_SINGLE_BURST_TRANSFER DMA_CTR2_TRIGM /*!< A single/burst transfer is conditioned by (at least) one hit trigger */ +/** + * @} + */ + +/** @defgroup DMAEx_Trigger_Selection DMAEx Trigger Selection + * @brief DMAEx Trigger Selection + * @{ + */ +/* HPDMA1 triggers */ +#define HPDMA1_TRIGGER_DCMIPP_EVT_FRAMEEND 0U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_FRAMEEND */ +#define HPDMA1_TRIGGER_DCMIPP_EVT_HSYNC 1U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_HSYNC */ +#define HPDMA1_TRIGGER_DCMIPP_EVT_LINEEND 2U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_LINEEND */ +#define HPDMA1_TRIGGER_DCMIPP_EVT_VSYNC 3U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_VSYNC */ +#define HPDMA1_TRIGGER_DMA2D_CTC_FLAG 4U /*!< HPDMA1 HW Trigger signal is DMA2D_CTC_FLAG */ +#define HPDMA1_TRIGGER_DMA2D_TC_FLAG 5U /*!< HPDMA1 HW Trigger signal is DMA2D_TC_FLAG */ +#define HPDMA1_TRIGGER_DMA2D_TW_FLAG 6U /*!< HPDMA1 HW Trigger signal is DMA2D_TW_FLAG */ +#define HPDMA1_TRIGGER_JPEG_EOC_FLAG 7U /*!< HPDMA1 HW Trigger signal is JPEG_EOC_FLAG */ +#define HPDMA1_TRIGGER_JPEG_IFNF_FLAG 8U /*!< HPDMA1 HW Trigger signal is JPEG_IFNF_FLAG */ +#define HPDMA1_TRIGGER_JPEG_IFT_FLAG 9U /*!< HPDMA1 HW Trigger signal is JPEG_IFT_FLAG */ +#define HPDMA1_TRIGGER_JPEG_OFNE_FLAG 10U /*!< HPDMA1 HW Trigger signal is JPEG_OFNE_FLAG */ +#define HPDMA1_TRIGGER_JPEG_OFT_FLAG 11U /*!< HPDMA1 HW Trigger signal is JPEG_OFT_FLAG */ +#define HPDMA1_TRIGGER_LCD 12U /*!< HPDMA1 HW Trigger signal is LCD */ +#define HPDMA1_TRIGGER_GPU2D1_GP_FLAG0 13U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG0 */ +#define HPDMA1_TRIGGER_GPU2D1_GP_FLAG1 14U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG1 */ +#define HPDMA1_TRIGGER_GPU2D1_GP_FLAG2 15U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG2 */ +#define HPDMA1_TRIGGER_GPU2D1_GP_FLAG3 16U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG3 */ +#define HPDMA1_TRIGGER_GFXTIM_0_EVT_4 17U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_4 */ +#define HPDMA1_TRIGGER_GFXTIM_0_EVT_3 18U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_3 */ +#define HPDMA1_TRIGGER_GFXTIM_0_EVT_2 19U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_2 */ +#define HPDMA1_TRIGGER_GFXTIM_0_EVT_1 20U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_1 */ +#define HPDMA1_TRIGGER_GPDMA1_CH0_TCF 21U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH0_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH1_TCF 22U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH2_TCF 23U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH2_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH3_TCF 24U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH3_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH4_TCF 25U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH4_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH5_TCF 26U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH5_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH6_TCF 27U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH6_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH7_TCF 28U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH7_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH8_TCF 29U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH8_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH9_TCF 30U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH9_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH10_TCF 31U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH10_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH11_TCF 32U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH11_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH12_TCF 33U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH12_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH13_TCF 34U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH13_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH14_TCF 35U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH14_TCF */ +#define HPDMA1_TRIGGER_GPDMA1_CH15_TCF 36U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH15_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH0_TCF 37U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH0_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH1_TCF 38U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH1_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH2_TCF 39U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH2_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH3_TCF 40U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH3_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH4_TCF 41U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH4_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH5_TCF 42U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH5_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH6_TCF 43U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH6_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH7_TCF 44U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH7_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH8_TCF 45U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH8_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH9_TCF 46U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH9_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH10_TCF 47U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH10_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH11_TCF 48U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH11_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH12_TCF 49U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH12_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH13_TCF 50U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH13_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH14_TCF 51U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH14_TCF */ +#define HPDMA1_TRIGGER_HPDMA1_CH15_TCF 52U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH15_TCF */ + +/* GPDMA1 triggers */ +#define GPDMA1_TRIGGER_HPDMA1_CH0_TCF 0U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH0_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH1_TCF 1U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH1_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH2_TCF 2U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH2_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH3_TCF 3U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH3_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH4_TCF 4U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH4_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH5_TCF 5U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH5_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH6_TCF 6U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH6_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH7_TCF 7U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH7_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH8_TCF 8U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH8_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH9_TCF 9U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH9_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH10_TCF 10U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH10_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH11_TCF 11U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH11_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH12_TCF 12U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH12_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH13_TCF 13U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH13_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH14_TCF 14U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH14_TCF */ +#define GPDMA1_TRIGGER_HPDMA1_CH15_TCF 15U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH15_TCF */ +#define GPDMA1_TRIGGER_LPTIM1_CH1 16U /*!< GPDMA1 HW Trigger signal is LPTIM1_CH1 */ +#define GPDMA1_TRIGGER_LPTIM1_CH2 17U /*!< GPDMA1 HW Trigger signal is LPTIM1_CH2 */ +#define GPDMA1_TRIGGER_LPTIM2_CH1 18U /*!< GPDMA1 HW Trigger signal is LPTIM2_CH1 */ +#define GPDMA1_TRIGGER_LPTIM2_CH2 19U /*!< GPDMA1 HW Trigger signal is LPTIM2_CH2 */ +#define GPDMA1_TRIGGER_LPTIM3_CH1 20U /*!< GPDMA1 HW Trigger signal is LPTIM3_CH1 */ +#define GPDMA1_TRIGGER_LPTIM3_CH2 21U /*!< GPDMA1 HW Trigger signal is LPTIM3_CH2 */ +#define GPDMA1_TRIGGER_LPTIM4_OUT 22U /*!< GPDMA1 HW Trigger signal is LPTIM4_OUT */ +#define GPDMA1_TRIGGER_LPTIM5_OUT 23U /*!< GPDMA1 HW Trigger signal is LPTIM5_OUT */ +#define GPDMA1_TRIGGER_EXTIT0_SYNC 24U /*!< GPDMA1 HW Trigger signal is EXTIT0_SYNC */ +#define GPDMA1_TRIGGER_RTC_WKUP 25U /*!< GPDMA1 HW Trigger signal is RTC_WKUP */ +#define GPDMA1_TRIGGER_LPUART1_IT_R_WUP_ASYNC 26U /*!< GPDMA1 HW Trigger signal is R_WUP_ASYNC */ +#define GPDMA1_TRIGGER_LPUART1_IT_T_WUP_ASYNC 27U /*!< GPDMA1 HW Trigger signal is T_WUP_ASYNC */ +#define GPDMA1_TRIGGER_SPI6_IT_OR_SPI6_AIT_SYNC 28U /*!< GPDMA1 HW Trigger signal is SPI6_OR_SPI6_AIT_SYNC */ +#define GPDMA1_TRIGGER_GPDMA1_CH0_TCF 29U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH1_TCF 30U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH2_TCF 31U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH2_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH3_TCF 32U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH3_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH4_TCF 33U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH4_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH5_TCF 34U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH5_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH6_TCF 35U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH6_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH7_TCF 36U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH7_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH8_TCF 37U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH8_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH9_TCF 38U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH9_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH10_TCF 39U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH10_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH11_TCF 40U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH11_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH12_TCF 41U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH12_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH13_TCF 42U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH13_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH14_TCF 43U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH14_TCF */ +#define GPDMA1_TRIGGER_GPDMA1_CH15_TCF 44U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH15_TCF */ +#define GPDMA1_TRIGGER_TIM1_TRGO 45U /*!< GPDMA1 HW Trigger signal is TIM1_TRGO */ +#define GPDMA1_TRIGGER_TIM1_TRGO2 46U /*!< GPDMA1 HW Trigger signal is TIM1_TRGO2 */ +#define GPDMA1_TRIGGER_TIM2_TRGO 47U /*!< GPDMA1 HW Trigger signal is TIM2_TRGO */ +#define GPDMA1_TRIGGER_TIM3_TRGO 48U /*!< GPDMA1 HW Trigger signal is TIM3_TRGO */ +#define GPDMA1_TRIGGER_TIM4_TRGO 49U /*!< GPDMA1 HW Trigger signal is TIM4_TRGO */ +#define GPDMA1_TRIGGER_TIM5_TRGO 50U /*!< GPDMA1 HW Trigger signal is TIM5_TRGO */ +#define GPDMA1_TRIGGER_TIM6_TRGO 51U /*!< GPDMA1 HW Trigger signal is TIM6_TRGO */ +#define GPDMA1_TRIGGER_TIM7_TRGO 52U /*!< GPDMA1 HW Trigger signal is TIM7_TRGO */ +#define GPDMA1_TRIGGER_TIM9_TRGO 53U /*!< GPDMA1 HW Trigger signal is TIM9_TRGO */ +#define GPDMA1_TRIGGER_TIM12_TRGO 54U /*!< GPDMA1 HW Trigger signal is TIM12_TRGO */ +#define GPDMA1_TRIGGER_TIM15_TRGO 55U /*!< GPDMA1 HW Trigger signal is TIM15_TRGO */ + +#define GPDMA1_MAX_TRIGGER 55U +/** + * @} + */ + +/** @defgroup DMAEx_Node_Type DMAEx Node Type + * @brief DMAEx Node Type + * @{ + */ +#define DMA_GPDMA_LINEAR_NODE (DMA_CHANNEL_TYPE_GPDMA | DMA_CHANNEL_TYPE_LINEAR_ADDR) /*!< Defines the GPDMA linear addressing node type */ +#define DMA_GPDMA_2D_NODE (DMA_CHANNEL_TYPE_GPDMA | DMA_CHANNEL_TYPE_2D_ADDR) /*!< Defines the GPDMA 2 dimension addressing node type */ +#define DMA_HPDMA_LINEAR_NODE (DMA_CHANNEL_TYPE_HPDMA | DMA_CHANNEL_TYPE_LINEAR_ADDR) /*!< Defines the HPDMA linear addressing node type */ +#define DMA_HPDMA_2D_NODE (DMA_CHANNEL_TYPE_HPDMA | DMA_CHANNEL_TYPE_2D_ADDR) /*!< Defines the HPDMA 2 dimension addressing node type */ +/** + * @} + */ + +/** @defgroup DMAEx_Link_Allocated_Port DMAEx Linked-List Allocated Port + * @brief DMAEx Linked-List Allocated Port + * @{ + */ +#define DMA_LINK_ALLOCATED_PORT0 0x00000000U /*!< Link allocated port 0 */ +#define DMA_LINK_ALLOCATED_PORT1 DMA_CCR_LAP /*!< Link allocated port 1 */ +/** + * @} + */ + +/** @defgroup DMAEx_Link_Step_Mode DMAEx Link Step Mode + * @brief DMAEx Link Step Mode + * @{ + */ +#define DMA_LSM_FULL_EXECUTION 0x00000000U /*!< Channel is executed for the full linked-list */ +#define DMA_LSM_1LINK_EXECUTION DMA_CCR_LSM /*!< Channel is executed once for the current LLI */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @brief DMAEx Exported functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 Linked-List Initialization and De-Initialization Functions + * @brief Linked-List Initialization and De-Initialization Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMAEx_List_Init(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMAEx_List_DeInit(DMA_HandleTypeDef *const hdma); +/** + * @} + */ + +/** @defgroup DMAEx_Exported_Functions_Group2 Linked-List IO Operation Functions + * @brief Linked-List IO Operation Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMAEx_List_Start(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMAEx_List_Start_IT(DMA_HandleTypeDef *const hdma); +/** + * @} + */ + +/** @defgroup DMAEx_Exported_Functions_Group3 Linked-List Management Functions + * @brief Linked-List Management Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMAEx_List_BuildNode(DMA_NodeConfTypeDef const *const pNodeConfig, + DMA_NodeTypeDef *const pNode); +HAL_StatusTypeDef HAL_DMAEx_List_GetNodeConfig(DMA_NodeConfTypeDef *const pNodeConfig, + DMA_NodeTypeDef const *const pNode); + +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pPrevNode, + DMA_NodeTypeDef *const pNewNode); +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode_Head(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode); +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode_Tail(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode); + +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNode); +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode_Head(DMA_QListTypeDef *const pQList); +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode_Tail(DMA_QListTypeDef *const pQList); + +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pOldNode, + DMA_NodeTypeDef *const pNewNode); +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode_Head(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode); +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode_Tail(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode); + +HAL_StatusTypeDef HAL_DMAEx_List_ResetQ(DMA_QListTypeDef *const pQList); + +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ(DMA_QListTypeDef *const pSrcQList, + DMA_NodeTypeDef const *const pPrevNode, + DMA_QListTypeDef *const pDestQList); +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ_Head(DMA_QListTypeDef *const pSrcQList, + DMA_QListTypeDef *const pDestQList); +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ_Tail(DMA_QListTypeDef *const pSrcQList, + DMA_QListTypeDef *const pDestQList); + +HAL_StatusTypeDef HAL_DMAEx_List_SetCircularModeConfig(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pFirstCircularNode); +HAL_StatusTypeDef HAL_DMAEx_List_SetCircularMode(DMA_QListTypeDef *const pQList); +HAL_StatusTypeDef HAL_DMAEx_List_ClearCircularMode(DMA_QListTypeDef *const pQList); + +HAL_StatusTypeDef HAL_DMAEx_List_ConvertQToDynamic(DMA_QListTypeDef *const pQList); +HAL_StatusTypeDef HAL_DMAEx_List_ConvertQToStatic(DMA_QListTypeDef *const pQList); + +HAL_StatusTypeDef HAL_DMAEx_List_LinkQ(DMA_HandleTypeDef *const hdma, + DMA_QListTypeDef *const pQList); +HAL_StatusTypeDef HAL_DMAEx_List_UnLinkQ(DMA_HandleTypeDef *const hdma); +/** + * @} + */ + +/** @defgroup DMAEx_Exported_Functions_Group4 Data Handling, Repeated Block and Trigger Configuration Functions + * @brief Data Handling, Repeated Block and Trigger Configuration Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigDataHandling(DMA_HandleTypeDef *const hdma, + DMA_DataHandlingConfTypeDef const *const pConfigDataHandling); +HAL_StatusTypeDef HAL_DMAEx_ConfigTrigger(DMA_HandleTypeDef *const hdma, + DMA_TriggerConfTypeDef const *const pConfigTrigger); +HAL_StatusTypeDef HAL_DMAEx_ConfigRepeatBlock(DMA_HandleTypeDef *const hdma, + DMA_RepeatBlockConfTypeDef const *const pConfigRepeatBlock); +/** + * @} + */ + +/** @defgroup DMAEx_Exported_Functions_Group5 Suspend and Resume Operation Functions + * @brief Suspend and Resume Operation Functions + * @{ + */ +HAL_StatusTypeDef HAL_DMAEx_Suspend(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMAEx_Suspend_IT(DMA_HandleTypeDef *const hdma); +HAL_StatusTypeDef HAL_DMAEx_Resume(DMA_HandleTypeDef *const hdma); +/** + * @} + */ + +/** @defgroup DMAEx_Exported_Functions_Group6 FIFO Status Function + * @brief FIFO Status Function + * @{ + */ +uint32_t HAL_DMAEx_GetFifoLevel(DMA_HandleTypeDef const *const hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -----------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Types DMAEx Private Types + * @brief DMAEx Private Types + * @{ + */ + +/** + * @brief DMA Node in Queue Information Structure Definition. + */ +typedef struct +{ + uint32_t cllr_offset; /* CLLR register offset */ + + uint32_t previousnode_addr; /* Previous node address */ + + uint32_t currentnode_pos; /* Current node position */ + + uint32_t currentnode_addr; /* Current node address */ + + uint32_t nextnode_addr; /* Next node address */ + +} DMA_NodeInQInfoTypeDef; +/** + * @} + */ + +/* Private constants -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Constants DMAEx Private Constants + * @brief DMAEx Private Constants + * @{ + */ +#define DMA_LINKEDLIST (0x0080U) /* DMA channel linked-list mode */ + +#define DMA_CHANNEL_TYPE_LINEAR_ADDR (0x0001U) /* DMA channel linear addressing mode */ +#define DMA_CHANNEL_TYPE_2D_ADDR (0x0002U) /* DMA channel 2D addressing mode */ +#define DMA_CHANNEL_TYPE_GPDMA (0x0020U) /* GPDMA channel node */ +#define DMA_CHANNEL_TYPE_HPDMA (0x0040U) /* HPDMA channel node */ + +#define NODE_TYPE_MASK (0x00FFU) /* DMA channel node type */ +#define NODE_CLLR_IDX (0x0700U) /* DMA channel node CLLR index mask */ +#define NODE_CLLR_IDX_POS (0x0008U) /* DMA channel node CLLR index position */ + +#define NODE_MAXIMUM_SIZE (0x0008U) /* Amount of registers of the node */ + +#define NODE_STATIC_FORMAT (0x0000U) /* DMA channel node static format */ +#define NODE_DYNAMIC_FORMAT (0x0001U) /* DMA channel node dynamic format */ + +#define UPDATE_CLLR_POSITION (0x0000U) /* DMA channel update CLLR position */ +#define UPDATE_CLLR_VALUE (0x0001U) /* DMA channel update CLLR value */ + +#define LASTNODE_ISNOT_CIRCULAR (0x0000U) /* Last node is not first circular node */ +#define LASTNODE_IS_CIRCULAR (0x0001U) /* Last node is first circular node */ + +#define QUEUE_TYPE_STATIC (0x0000U) /* DMA channel static queue */ +#define QUEUE_TYPE_DYNAMIC (0x0001U) /* DMA channel dynamic queue */ + +#define NODE_CTR1_DEFAULT_OFFSET (0x0000U) /* CTR1 default offset */ +#define NODE_CTR2_DEFAULT_OFFSET (0x0001U) /* CTR2 default offset */ +#define NODE_CBR1_DEFAULT_OFFSET (0x0002U) /* CBR1 default offset */ +#define NODE_CSAR_DEFAULT_OFFSET (0x0003U) /* CSAR default offset */ +#define NODE_CDAR_DEFAULT_OFFSET (0x0004U) /* CDAR default offset */ +#define NODE_CTR3_DEFAULT_OFFSET (0x0005U) /* CTR3 2D addressing default offset */ +#define NODE_CBR2_DEFAULT_OFFSET (0x0006U) /* CBR2 2D addressing default offset */ +#define NODE_CLLR_2D_DEFAULT_OFFSET (0x0007U) /* CLLR 2D addressing default offset */ +#define NODE_CLLR_LINEAR_DEFAULT_OFFSET (0x0005U) /* CLLR linear addressing default offset */ + +#define DMA_BURST_ADDR_OFFSET_MIN (-8192L) /* DMA burst minimum address offset */ +#define DMA_BURST_ADDR_OFFSET_MAX (8192L) /* DMA burst maximum address offset */ +#define DMA_BLOCK_ADDR_OFFSET_MIN (-65536L) /* DMA block minimum address offset */ +#define DMA_BLOCK_ADDR_OFFSET_MAX (65536L) /* DMA block maximum address offset */ +/** + * @} + */ + +/* Private macros ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx Private Macros + * @{ + */ +#define IS_DMA_DATA_ALIGNMENT(ALIGNMENT) \ + (((ALIGNMENT) == DMA_DATA_RIGHTALIGN_ZEROPADDED) || \ + ((ALIGNMENT) == DMA_DATA_RIGHTALIGN_SIGNEXT) || \ + ((ALIGNMENT) == DMA_DATA_PACK)) + +#define IS_DMA_DATA_EXCHANGE(EXCHANGE) \ + (((EXCHANGE) & (~(DMA_EXCHANGE_SRC_BYTE | DMA_EXCHANGE_DEST_BYTE | DMA_EXCHANGE_DEST_HALFWORD | \ + DMA_EXCHANGE_DEST_WORD))) == 0U) + +#define IS_DMA_REPEAT_COUNT(COUNT) \ + (((COUNT) > 0U) && ((COUNT) <= (DMA_CBR1_BRC >> DMA_CBR1_BRC_Pos))) + +#define IS_DMA_BURST_ADDR_OFFSET(BURST_ADDR_OFFSET) \ + (((BURST_ADDR_OFFSET) > DMA_BURST_ADDR_OFFSET_MIN) && \ + ((BURST_ADDR_OFFSET) < DMA_BURST_ADDR_OFFSET_MAX)) + +#define IS_DMA_BLOCK_ADDR_OFFSET(BLOCK_ADDR_OFFSET) \ + (((BLOCK_ADDR_OFFSET) > DMA_BLOCK_ADDR_OFFSET_MIN) && \ + ((BLOCK_ADDR_OFFSET) < DMA_BLOCK_ADDR_OFFSET_MAX)) + +#define IS_DMA_LINK_ALLOCATED_PORT(LINK_ALLOCATED_PORT) \ + (((LINK_ALLOCATED_PORT) & (~(DMA_CCR_LAP))) == 0U) + +#define IS_DMA_LINK_STEP_MODE(MODE) \ + (((MODE) == DMA_LSM_FULL_EXECUTION) || \ + ((MODE) == DMA_LSM_1LINK_EXECUTION)) + +#define IS_DMA_TRIGGER_MODE(MODE) \ + (((MODE) == DMA_TRIGM_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TRIGM_REPEATED_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TRIGM_LLI_LINK_TRANSFER) || \ + ((MODE) == DMA_TRIGM_SINGLE_BURST_TRANSFER)) + +#define IS_DMA_TCEM_LINKEDLIST_EVENT_MODE(MODE) \ + (((MODE) == DMA_TCEM_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TCEM_REPEATED_BLOCK_TRANSFER) || \ + ((MODE) == DMA_TCEM_EACH_LL_ITEM_TRANSFER) || \ + ((MODE) == DMA_TCEM_LAST_LL_ITEM_TRANSFER)) + +#define IS_DMA_LINKEDLIST_MODE(MODE) \ + (((MODE) == DMA_LINKEDLIST_NORMAL) || \ + ((MODE) == DMA_LINKEDLIST_CIRCULAR)) + +#define IS_DMA_TRIGGER_POLARITY(POLARITY) \ + (((POLARITY) == DMA_TRIG_POLARITY_MASKED) || \ + ((POLARITY) == DMA_TRIG_POLARITY_RISING) || \ + ((POLARITY) == DMA_TRIG_POLARITY_FALLING)) + +#define IS_DMA_TRIGGER_SELECTION(TRIGGER) \ + ((TRIGGER) <= GPDMA1_TRIGGER_TIM15_TRGO) + +#define IS_DMA_NODE_TYPE(TYPE) \ + (((TYPE) == DMA_GPDMA_LINEAR_NODE) || \ + ((TYPE) == DMA_GPDMA_2D_NODE) || \ + ((TYPE) == DMA_HPDMA_LINEAR_NODE) || \ + ((TYPE) == DMA_HPDMA_2D_NODE)) +/** + * @} + */ + + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Functions DMAEx Private Functions + * @brief DMAEx Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7RSxx_HAL_DMA_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dts.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dts.h new file mode 100644 index 000000000..34852013b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_dts.h @@ -0,0 +1,546 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dts.h + * @author MCD Application Team + * @brief Header file of DTS HAL module. + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/ +#ifndef STM32H7RSxx_HAL_DTS_H +#define STM32H7RSxx_HAL_DTS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup DTS + * @{ + */ + +/* Exported types ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Exported_Types DTS Exported Types + * @{ + */ + +/** + * @brief DTS Init structure definition + */ +typedef struct +{ + uint32_t QuickMeasure; /*!< Specifies the quick measure option selection of the DTS sensor. + This parameter can be a value of @ref DTS_Quick_Measurement */ + + uint32_t RefClock; /*!< Specifies the reference clock selection of the DTS sensor. + This parameter can be a value of @ref DTS_Reference_Clock_Selection */ + + uint32_t TriggerInput; /*!< Specifies the trigger input of the DTS sensor. + This parameter can be a value of @ref DTS_TriggerConfig */ + + uint32_t SamplingTime; /*!< Specifies the sampling time configuration. + This parameter can be a value of @ref DTS_Sampling_Time */ + + uint32_t Divider; /*!< Specifies the high speed clock divider ratio. + This parameter can be a value from 0 to 127 */ + + uint32_t HighThreshold; /*!< Specifies the high threshold of the DTS sensor */ + + uint32_t LowThreshold; /*!< Specifies the low threshold of the DTS sensor */ + +} DTS_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DTS_STATE_RESET = 0x00UL, /*!< DTS not yet initialized or disabled */ + HAL_DTS_STATE_READY = 0x01UL, /*!< DTS initialized and ready for use */ + HAL_DTS_STATE_BUSY = 0x02UL, /*!< DTS is running */ + HAL_DTS_STATE_TIMEOUT = 0x03UL, /*!< Timeout state */ + HAL_DTS_STATE_ERROR = 0x04UL /*!< Internal Process error */ + +} HAL_DTS_StateTypeDef; + +/** + * @brief DTS Handle Structure definition + */ +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) +typedef struct __DTS_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ +{ + DTS_TypeDef *Instance; /*!< Register base address */ + DTS_InitTypeDef Init; /*!< DTS required parameters */ + HAL_LockTypeDef Lock; /*!< DTS Locking object */ + __IO HAL_DTS_StateTypeDef State; /*!< DTS peripheral state */ + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + void (* MspInitCallback)(struct __DTS_HandleTypeDef *hdts); /*!< DTS Base Msp Init Callback */ + void (* MspDeInitCallback)(struct __DTS_HandleTypeDef *hdts); /*!< DTS Base Msp DeInit Callback */ + void (* EndCallback)(struct __DTS_HandleTypeDef *hdts); /*!< End measure Callback */ + void (* LowCallback)(struct __DTS_HandleTypeDef *hdts); /*!< low threshold Callback */ + void (* HighCallback)(struct __DTS_HandleTypeDef *hdts); /*!< high threshold Callback */ + void (* AsyncEndCallback)(struct __DTS_HandleTypeDef *hdts); /*!< Asynchronous end of measure Callback */ + void (* AsyncLowCallback)(struct __DTS_HandleTypeDef *hdts); /*!< Asynchronous low threshold Callback */ + void (* AsyncHighCallback)(struct __DTS_HandleTypeDef *hdts); /*!< Asynchronous high threshold Callback */ +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ +} DTS_HandleTypeDef; + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) +/** + * @brief DTS callback ID enumeration definition + */ +typedef enum +{ + HAL_DTS_MEAS_COMPLETE_CB_ID = 0x00U, /*!< Measure complete callback ID */ + HAL_DTS_ASYNC_MEAS_COMPLETE_CB_ID = 0x01U, /*!< Asynchronous measure complete callback ID */ + HAL_DTS_LOW_THRESHOLD_CB_ID = 0x02U, /*!< Low threshold detection callback ID */ + HAL_DTS_ASYNC_LOW_THRESHOLD_CB_ID = 0x03U, /*!< Asynchronous low threshold detection callback ID */ + HAL_DTS_HIGH_THRESHOLD_CB_ID = 0x04U, /*!< High threshold detection callback ID */ + HAL_DTS_ASYNC_HIGH_THRESHOLD_CB_ID = 0x05U, /*!< Asynchronous high threshold detection callback ID */ + HAL_DTS_MSPINIT_CB_ID = 0x06U, /*!< MSP init callback ID */ + HAL_DTS_MSPDEINIT_CB_ID = 0x07U /*!< MSP de-init callback ID */ +} HAL_DTS_CallbackIDTypeDef; + +/** + * @brief DTS callback pointers definition + */ +typedef void (*pDTS_CallbackTypeDef)(DTS_HandleTypeDef *hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants ------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Exported_Constants DTS Exported Constants + * @{ + */ + +/** @defgroup DTS_TriggerConfig DTS Trigger Configuration + * @{ + */ +/* @brief No Hardware trigger detection */ +#define DTS_TRIGGER_HW_NONE (0UL) + +/* @brief External Interrupt Mode with LPTIMER1 trigger detection */ +#define DTS_TRIGGER_LPTIMER4 DTS_CFGR1_TS1_INTRIG_SEL_0 + +/* @brief External Interrupt Mode with LPTIMER2 trigger detection */ +#define DTS_TRIGGER_LPTIMER2 DTS_CFGR1_TS1_INTRIG_SEL_1 + +/* @brief External Interrupt Mode with LPTIMER3 trigger detection */ +#define DTS_TRIGGER_LPTIMER3 (DTS_CFGR1_TS1_INTRIG_SEL_0 | DTS_CFGR1_TS1_INTRIG_SEL_1) + +/* @brief External Interrupt Mode with EXTI13 trigger detection */ +#define DTS_TRIGGER_EXTI13 DTS_CFGR1_TS1_INTRIG_SEL_2 +/** + * @} + */ + +/** @defgroup DTS_Quick_Measurement DTS Quick Measurement + * @{ + */ +#define DTS_QUICKMEAS_ENABLE DTS_CFGR1_Q_MEAS_OPT /*!< Enable the Quick Measure (Measure without calibration) */ +#define DTS_QUICKMEAS_DISABLE (0x0UL) /*!< Disable the Quick Measure (Measure with calibration) */ +/** + * @} + */ + +/** @defgroup DTS_Reference_Clock_Selection DTS Reference Clock Selection + * @{ + */ +#define DTS_REFCLKSEL_LSE DTS_CFGR1_REFCLK_SEL /*!< Low speed REF clock (LSE) */ +#define DTS_REFCLKSEL_PCLK (0UL) /*!< High speed REF clock (PCLK) */ +/** + * @} + */ + +/** @defgroup DTS_Sampling_Time DTS Sampling Time + * @{ + */ +#define DTS_SMP_TIME_1_CYCLE DTS_CFGR1_TS1_SMP_TIME_0 /*!< 1 clock cycle for the sampling time */ +#define DTS_SMP_TIME_2_CYCLE DTS_CFGR1_TS1_SMP_TIME_1 /*!< 2 clock cycle for the sampling time */ +#define DTS_SMP_TIME_3_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_1) /*!< 3 clock cycle for the sampling time */ +#define DTS_SMP_TIME_4_CYCLE (DTS_CFGR1_TS1_SMP_TIME_2) /*!< 4 clock cycle for the sampling time */ +#define DTS_SMP_TIME_5_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_2) /*!< 5 clock cycle for the sampling time */ +#define DTS_SMP_TIME_6_CYCLE (DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_2) /*!< 6 clock cycle for the sampling time */ +#define DTS_SMP_TIME_7_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_2) /*!< 7 clock cycle for the sampling time */ +#define DTS_SMP_TIME_8_CYCLE (DTS_CFGR1_TS1_SMP_TIME_3) /*!< 8 clock cycle for the sampling time */ +#define DTS_SMP_TIME_9_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 9 clock cycle for the sampling time */ +#define DTS_SMP_TIME_10_CYCLE (DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 10 clock cycle for the sampling time */ +#define DTS_SMP_TIME_11_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 11 clock cycle for the sampling time */ +#define DTS_SMP_TIME_12_CYCLE (DTS_CFGR1_TS1_SMP_TIME_2 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 12 clock cycle for the sampling time */ +#define DTS_SMP_TIME_13_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_2 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 13 clock cycle for the sampling time */ +#define DTS_SMP_TIME_14_CYCLE (DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_2 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 14 clock cycle for the sampling time */ +#define DTS_SMP_TIME_15_CYCLE (DTS_CFGR1_TS1_SMP_TIME_0 |\ + DTS_CFGR1_TS1_SMP_TIME_1 |\ + DTS_CFGR1_TS1_SMP_TIME_2 |\ + DTS_CFGR1_TS1_SMP_TIME_3) /*!< 15 clock cycle for the sampling time */ +/** + * @} + */ + +/** @defgroup DTS_Flag_Definitions DTS Flag Definitions + * @{ + */ +#define DTS_FLAG_TS1_ITE DTS_SR_TS1_ITEF /*!< Interrupt flag for end of measure for DTS1 */ +#define DTS_FLAG_TS1_ITL DTS_SR_TS1_ITLF /*!< Interrupt flag for low threshold for DTS1 */ +#define DTS_FLAG_TS1_ITH DTS_SR_TS1_ITHF /*!< Interrupt flag for high threshold for DTS1 */ +#define DTS_FLAG_TS1_AITE DTS_SR_TS1_AITEF /*!< Asynchronous Interrupt flag for end of measure for DTS1 */ +#define DTS_FLAG_TS1_AITL DTS_SR_TS1_AITLF /*!< Asynchronous Interrupt flag for low threshold for DTS1 */ +#define DTS_FLAG_TS1_AITH DTS_SR_TS1_AITHF /*!< Asynchronous Interrupt flag for high threshold for DTS1 */ +#define DTS_FLAG_TS1_RDY DTS_SR_TS1_RDY /*!< Ready flag for DTS1 */ +/** + * @} + */ + +/** @defgroup DTS_Interrupts_Definitions DTS Interrupts Definitions + * @{ + */ +#define DTS_IT_TS1_ITE DTS_ITENR_TS1_ITEEN /*!< Enable interrupt flag for end of measure for DTS1 */ +#define DTS_IT_TS1_ITL DTS_ITENR_TS1_ITLEN /*!< Enable interrupt flag for low threshold for DTS1 */ +#define DTS_IT_TS1_ITH DTS_ITENR_TS1_ITHEN /*!< Enable interrupt flag for high threshold for DTS1 */ +#define DTS_IT_TS1_AITE DTS_ITENR_TS1_AITEEN /*!< Enable asynchronous interrupt flag for end of measure for DTS1 */ +#define DTS_IT_TS1_AITL DTS_ITENR_TS1_AITLEN /*!< Enable asynchronous interrupt flag for low threshold for DTS1 */ +#define DTS_IT_TS1_AITH DTS_ITENR_TS1_AITHEN /*!< Enable asynchronous interrupt flag for high threshold for DTS1 */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros ---------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Exported_Macros DTS Exported Macros + * @{ + */ + +/** @brief Reset DTS handle state + * @param __HANDLE__ DTS handle. + * @retval None + */ +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) +#define __HAL_DTS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_DTS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else /* USE_HAL_DTS_REGISTER_CALLBACKS */ +#define __HAL_DTS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DTS_STATE_RESET) +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + +/** + * @brief Enable the specified DTS sensor + * @param __HANDLE__ DTS handle. + * @retval None + */ +#define __HAL_DTS_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR1, DTS_CFGR1_TS1_EN) + +/** + * @brief Disable the specified DTS sensor + * @param __HANDLE__ DTS handle. + * @retval None + */ +#define __HAL_DTS_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR1, DTS_CFGR1_TS1_EN) + +/** + * @brief Enable the DTS EXTI line in interrupt mode + * @retval None + */ +#define __HAL_DTS_EXTI_WAKEUP_ENABLE_IT() SET_BIT(EXTI->IMR2, DTS_EXTI_LINE_DTS1) + +/** + * @brief Disable the DTS EXTI line in interrupt mode + * @retval None + */ +#define __HAL_DTS_EXTI_WAKEUP_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, DTS_EXTI_LINE_DTS1) + +/** + * @brief Enable the DTS EXTI Line in event mode + * @retval None + */ +#define __HAL_DTS_EXTI_WAKEUP_ENABLE_EVENT() SET_BIT(EXTI->EMR2, DTS_EXTI_LINE_DTS1) + +/** + * @brief Disable the DTS EXTI Line in event mode + * @retval None + */ +#define __HAL_DTS_EXTI_WAKEUP_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, DTS_EXTI_LINE_DTS1) + +/** @brief Checks whether the specified DTS flag is set or not. + * @param __HANDLE__ specifies the DTS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg DTS_FLAG_TS1_ITE : interrupt flag for end of measure for DTS1 + * @arg DTS_FLAG_TS1_ITL : interrupt flag for low threshold for DTS1 + * @arg DTS_FLAG_TS1_ITH : interrupt flag for high threshold for DTS1 + * @arg DTS_FLAG_TS1_AITE: asynchronous interrupt flag for end of measure for DTS1 + * @arg DTS_FLAG_TS1_AITL: asynchronous interrupt flag for low threshold for DTS1 + * @arg DTS_FLAG_TS1_AITH: asynchronous interrupt flag for high threshold for DTS1 + * @arg DTS_FLAG_TS1_RDY : Ready flag for DTS1 + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_DTS_GET_FLAG(__HANDLE__, __FLAG__) \ + (((((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)))? SET : RESET) + + +/** @brief Clears the specified DTS pending flag. + * @param __HANDLE__ specifies the DTS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg DTS_FLAG_TS1_ITE : interrupt flag for end of measure for DTS1 + * @arg DTS_FLAG_TS1_ITL : interrupt flag for low threshold for DTS1 + * @arg DTS_FLAG_TS1_ITH : interrupt flag for high threshold for DTS1 + * @arg DTS_FLAG_TS1_AITE: asynchronous interrupt flag for end of measure for DTS1 + * @arg DTS_FLAG_TS1_AITL: asynchronous interrupt flag for low threshold for DTS1 + * @arg DTS_FLAG_TS1_AITH: asynchronous interrupt flag for high threshold for DTS1 + * @retval None + */ +#define __HAL_DTS_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->ICIFR = (__FLAG__)) + + +/** @brief Enable the specified DTS interrupt. + * @param __HANDLE__ specifies the DTS Handle. + * @param __INTERRUPT__ specifies the DTS interrupt source to enable. + * This parameter can be one of the following values: + * @arg DTS_IT_TS1_ITE : interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_ITL : interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_ITH : interrupt flag for high of measure for DTS1 + * @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1 + * @retval None + */ +#define __HAL_DTS_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + SET_BIT((__HANDLE__)->Instance->ITENR, __INTERRUPT__) + + +/** @brief Disable the specified DTS interrupt. + * @param __HANDLE__ specifies the DTS Handle. + * @param __INTERRUPT__ specifies the DTS interrupt source to enable. + * This parameter can be one of the following values: + * @arg DTS_IT_TS1_ITE : interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_ITL : interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_ITH : interrupt flag for high of measure for DTS1 + * @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1 + * @retval None + */ +#define __HAL_DTS_DISABLE_IT(__HANDLE__,__INTERRUPT__) \ + CLEAR_BIT((__HANDLE__)->Instance->ITENR, __INTERRUPT__) + + +/** @brief Check whether the specified DTS interrupt source is enabled or not. + * @param __HANDLE__ DTS handle. + * @param __INTERRUPT__ DTS interrupt source to check + * This parameter can be one of the following values: + * @arg DTS_IT_TS1_ITE : interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_ITL : interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_ITH : interrupt flag for high of measure for DTS1 + * @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1 + * @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1 + * @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1 + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DTS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (( ((__HANDLE__)->Instance->ITENR & (__INTERRUPT__)) == (__INTERRUPT__))? SET : RESET) + + +/** @brief Check whether the specified DTS REFCLK is selected + * @param __HANDLE__ DTS handle. + * @param __REFCLK__ DTS reference clock to check + * This parameter can be one of the following values: + * @arg DTS_REFCLKSEL_LSE: Low speed REF clock + * @arg DTS_REFCLKSEL_PCLK: High speed REF clock + * @retval State of the REF clock tested (SET or RESET) + */ +#define __HAL_DTS_GET_REFCLK(__HANDLE__, __REFCLK__) \ + ((((__HANDLE__)->Instance->CFGR1 & (__REFCLK__)) == (__REFCLK__))? SET : RESET) + +/** @brief Get Trigger + * @param __HANDLE__ DTS handle. + * @retval One of the following trigger + * DTS_TRIGGER_HW_NONE : No HW trigger (SW trigger) + * DTS_TRIGGER_LPTIMER1: LPTIMER1 trigger + * DTS_TRIGGER_LPTIMER2: LPTIMER2 trigger + * DTS_TRIGGER_LPTIMER3: LPTIMER3 trigger + * DTS_TRIGGER_EXTI13 : EXTI13 trigger + */ +#define __HAL_DTS_GET_TRIGGER(__HANDLE__) ((__HANDLE__)->Instance->CFGR1 & (DTS_CFGR1_TS1_INTRIG_SEL)) +/** + * @} + */ + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @addtogroup DTS_Exported_Functions + * @{ + */ + +/** @addtogroup DTS_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions */ +HAL_StatusTypeDef HAL_DTS_Init(DTS_HandleTypeDef *hdts); +HAL_StatusTypeDef HAL_DTS_DeInit(DTS_HandleTypeDef *hdts); +void HAL_DTS_MspInit(DTS_HandleTypeDef *hdts); +void HAL_DTS_MspDeInit(DTS_HandleTypeDef *hdts); +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_DTS_RegisterCallback(DTS_HandleTypeDef *hdts, + HAL_DTS_CallbackIDTypeDef CallbackID, + pDTS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DTS_UnRegisterCallback(DTS_HandleTypeDef *hdts, + HAL_DTS_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ +/** + * @} + */ + + +/** @addtogroup DTS_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions */ +HAL_StatusTypeDef HAL_DTS_Start(DTS_HandleTypeDef *hdts); +HAL_StatusTypeDef HAL_DTS_Stop(DTS_HandleTypeDef *hdts); +HAL_StatusTypeDef HAL_DTS_GetTemperature(DTS_HandleTypeDef *hdts, int32_t *Temperature); +HAL_StatusTypeDef HAL_DTS_Start_IT(DTS_HandleTypeDef *hdts); +HAL_StatusTypeDef HAL_DTS_Stop_IT(DTS_HandleTypeDef *hdts); +void HAL_DTS_IRQHandler(DTS_HandleTypeDef *hdts); + +/* Callback in Interrupt mode */ +void HAL_DTS_EndCallback(DTS_HandleTypeDef *hdts); +void HAL_DTS_LowCallback(DTS_HandleTypeDef *hdts); +void HAL_DTS_HighCallback(DTS_HandleTypeDef *hdts); +void HAL_DTS_AsyncEndCallback(DTS_HandleTypeDef *hdts); +void HAL_DTS_AsyncLowCallback(DTS_HandleTypeDef *hdts); +void HAL_DTS_AsyncHighCallback(DTS_HandleTypeDef *hdts); +/** + * @} + */ + +/** @addtogroup DTS_Exported_Functions_Group3 + * @{ + */ +HAL_DTS_StateTypeDef HAL_DTS_GetState(const DTS_HandleTypeDef *hdts); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -----------------------------------------------------------------------------------------------------*/ +/* Private constants -------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Private_Constants DTS Private Constants + * @{ + */ +/** @defgroup DTS_ExtiLine DTS EXTI Lines + * @{ + */ +#define DTS_EXTI_LINE_DTS1 (EXTI_IMR3_IM77) /*!< EXTI line 77 connected to DTS1 output */ +/** + * @} + */ +/** + * @} + */ + +/* Private macros ----------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Private_Macros DTS Private Macros + * @{ + */ + +/** @defgroup DTS_IS_DTS_Definitions DTS Private macros to check input parameters + * @{ + */ +#define IS_DTS_QUICKMEAS(__SEL__) (((__SEL__) == DTS_QUICKMEAS_DISABLE) || \ + ((__SEL__) == DTS_QUICKMEAS_ENABLE)) + +#define IS_DTS_REFCLK(__SEL__) (((__SEL__) == DTS_REFCLKSEL_LSE) || \ + ((__SEL__) == DTS_REFCLKSEL_PCLK)) +#define IS_DTS_TRIGGERINPUT(__INPUT__) (((__INPUT__) == DTS_TRIGGER_HW_NONE) || \ + ((__INPUT__) == DTS_TRIGGER_LPTIMER4) || \ + ((__INPUT__) == DTS_TRIGGER_LPTIMER2) || \ + ((__INPUT__) == DTS_TRIGGER_LPTIMER3) || \ + ((__INPUT__) == DTS_TRIGGER_EXTI13)) + +#define IS_DTS_THRESHOLD(__THRESHOLD__) ((__THRESHOLD__) <= 0xFFFFUL) + +#define IS_DTS_DIVIDER_RATIO_NUMBER(__NUMBER__) ((__NUMBER__) <= 127UL) + +#define IS_DTS_SAMPLINGTIME(__CYCLE__) (((__CYCLE__) == DTS_SMP_TIME_1_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_2_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_3_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_4_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_5_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_6_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_7_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_8_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_9_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_10_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_11_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_12_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_13_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_14_CYCLE) || \ + ((__CYCLE__) == DTS_SMP_TIME_15_CYCLE)) + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_DTS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth.h new file mode 100644 index 000000000..db305e68f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth.h @@ -0,0 +1,1823 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_eth.h + * @author MCD Application Team + * @brief Header file of ETH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_ETH_H +#define STM32H7RSxx_HAL_ETH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(ETH) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup ETH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#ifndef ETH_TX_DESC_CNT +#define ETH_TX_DESC_CNT 4U +#endif /* ETH_TX_DESC_CNT */ + +#ifndef ETH_RX_DESC_CNT +#define ETH_RX_DESC_CNT 4U +#endif /* ETH_RX_DESC_CNT */ + +#ifndef ETH_SWRESET_TIMEOUT +#define ETH_SWRESET_TIMEOUT 500U +#endif /* ETH_SWRESET_TIMEOUT */ + +#ifndef ETH_MDIO_BUS_TIMEOUT +#define ETH_MDIO_BUS_TIMEOUT 1000U +#endif /* ETH_MDIO_BUS_TIMEOUT */ + +#ifndef ETH_MAC_US_TICK +#define ETH_MAC_US_TICK 1000000U +#endif /* ETH_MAC_US_TICK */ + +/*********************** Descriptors struct def section ************************/ +/** @defgroup ETH_Exported_Types ETH Exported Types + * @{ + */ + +/** + * @brief ETH DMA Descriptor structure definition + */ +typedef struct +{ + __IO uint32_t DESC0; + __IO uint32_t DESC1; + __IO uint32_t DESC2; + __IO uint32_t DESC3; + uint32_t BackupAddr0; /* used to store rx buffer 1 address */ + uint32_t BackupAddr1; /* used to store rx buffer 2 address */ +} ETH_DMADescTypeDef; +/** + * + */ + +/** + * @brief ETH Buffers List structure definition + */ +typedef struct __ETH_BufferTypeDef +{ + uint8_t *buffer; /*gState = HAL_ETH_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_ETH_STATE_RESET; \ + } while(0) +#endif /*USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @brief Enables the specified ETHERNET DMA interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be + * enabled @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified ETHERNET DMA interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be + * disabled. @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACIER &= ~(__INTERRUPT__)) + +/** + * @brief Gets the ETHERNET DMA IT source enabled or disabled. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts + * @retval The ETH DMA IT Source enabled or disabled + */ +#define __HAL_ETH_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->DMACIER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Gets the ETHERNET DMA IT pending bit. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts + * @retval The state of ETH DMA IT (SET or RESET) + */ +#define __HAL_ETH_DMA_GET_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->DMACSR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the ETHERNET DMA IT pending bit. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACSR = (__INTERRUPT__)) + +/** + * @brief Checks whether the specified ETHERNET DMA flag is set or not. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags + * @retval The state of ETH DMA FLAG (SET or RESET). + */ +#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMACSR &( __FLAG__)) == ( __FLAG__)) + +/** + * @brief Clears the specified ETHERNET DMA flag. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags + * @retval The state of ETH DMA FLAG (SET or RESET). + */ +#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMACSR = ( __FLAG__)) + +/** + * @brief Enables the specified ETHERNET MAC interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be + * enabled @ref ETH_MAC_Interrupts + * @retval None + */ + +#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified ETHERNET MAC interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be + * enabled @ref ETH_MAC_Interrupts + * @retval None + */ +#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified ETHERNET MAC flag is set or not. + * @param __HANDLE__: ETH Handle + * @param __INTERRUPT__: specifies the flag to check. @ref ETH_MAC_Interrupts + * @retval The state of ETH MAC IT (SET or RESET). + */ +#define __HAL_ETH_MAC_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MACISR &\ + ( __INTERRUPT__)) == ( __INTERRUPT__)) + +/*!< External interrupt line 46 Connected to the ETH wakeup EXTI Line */ +#define ETH_WAKEUP_EXTI_LINE 0x00004000U /* !< 46 - 32 = 14 */ + +/** + * @brief Enable the ETH WAKEUP Exti Line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be enabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__) (EXTI->IMR2 |= (__EXTI_LINE__)) + +/** + * @brief checks whether the specified ETH WAKEUP Exti interrupt flag is set or not. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval EXTI ETH WAKEUP Line Status. + */ +#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR2 & (__EXTI_LINE__)) + +/** + * @brief Clear the ETH WAKEUP Exti flag. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR2 = (__EXTI_LINE__)) + +/** + * @brief enable rising edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR2 &= ~(__EXTI_LINE__)); \ + (EXTI->RTSR2 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 &= ~(__EXTI_LINE__));\ + (EXTI->FTSR2 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 |= (__EXTI_LINE__));\ + (EXTI->FTSR2 |= (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER2 |= (__EXTI_LINE__)) +#define __HAL_ETH_GET_PTP_CONTROL(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->MACTSCR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) +#define __HAL_ETH_SET_PTP_CONTROL(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->MACTSCR |= (__FLAG__)) + +/** + * @} + */ + +/* Include ETH HAL Extension module */ +#include "stm32h7rsxx_hal_eth_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup ETH_Exported_Functions + * @{ + */ + +/** @addtogroup ETH_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de initialization functions **********************************/ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth); +void HAL_ETH_MspInit(ETH_HandleTypeDef *heth); +void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, + pETH_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth); + +HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff); +HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, + pETH_rxAllocateCallbackTypeDef rxAllocateCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(const ETH_HandleTypeDef *heth, uint32_t *pErrorCode); +HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth); + +#ifdef HAL_ETH_USE_PTP +HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); +HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); +HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); +HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); +HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, + ETH_TimeTypeDef *timeoffset); +HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); +HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); +HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth); +#endif /* HAL_ETH_USE_PTP */ + +HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig, uint32_t Timeout); +HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig); + +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(const ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t RegValue); +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t *pRegValue); + +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth); +void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_EEECallback(ETH_HandleTypeDef *heth); +void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_RxAllocateCallback(uint8_t **buff); +void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length); +void HAL_ETH_TxFreeCallback(uint32_t *buff); +void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp); +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* MAC & DMA Configuration APIs **********************************************/ +HAL_StatusTypeDef HAL_ETH_GetMACConfig(const ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); +HAL_StatusTypeDef HAL_ETH_GetDMAConfig(const ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); +HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); +HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); +void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth); + +/* MAC VLAN Processing APIs ************************************************/ +void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, + uint32_t VLANIdentifier); + +/* MAC L2 Packet Filtering APIs **********************************************/ +HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(const ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, const ETH_MACFilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable); +HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(const ETH_HandleTypeDef *heth, uint32_t AddrNbr, + const uint8_t *pMACAddr); + +/* MAC Power Down APIs *****************************************************/ +void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, + const ETH_PowerDownConfigTypeDef *pPowerDownConfig); +void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count); + +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_ETH_StateTypeDef HAL_ETH_GetState(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetDMAError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetMACError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetMACWakeUpSource(const ETH_HandleTypeDef *heth); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_ETH_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth_ex.h new file mode 100644 index 000000000..130c430c4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_eth_ex.h @@ -0,0 +1,366 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_eth_ex.h + * @author MCD Application Team + * @brief Header file of ETH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_ETH_EX_H +#define STM32H7RSxx_HAL_ETH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(ETH) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup ETHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Types ETHEx Exported Types + * @{ + */ + +/** + * @brief ETH RX VLAN structure definition + */ +typedef struct +{ + FunctionalState InnerVLANTagInStatus; /*!< Enables or disables Inner VLAN Tag in Rx Status */ + + uint32_t StripInnerVLANTag; /*!< Sets the Inner VLAN Tag Stripping on Receive + This parameter can be a value of + @ref ETHEx_Rx_Inner_VLAN_Tag_Stripping */ + + FunctionalState InnerVLANTag; /*!< Enables or disables Inner VLAN Tag */ + + FunctionalState DoubleVLANProcessing; /*!< Enable or Disable double VLAN processing */ + + FunctionalState VLANTagHashTableMatch; /*!< Enable or Disable VLAN Tag Hash Table Match */ + + FunctionalState VLANTagInStatus; /*!< Enable or Disable VLAN Tag in Rx status */ + + uint32_t StripVLANTag; /*!< Set the VLAN Tag Stripping on Receive + This parameter can be a value of @ref ETHEx_Rx_VLAN_Tag_Stripping */ + + uint32_t VLANTypeCheck; /*!< Enable or Disable VLAN Type Check + This parameter can be a value of @ref ETHEx_VLAN_Type_Check */ + + FunctionalState VLANTagInverceMatch; /*!< Enable or disable VLAN Tag Inverse Match */ +} ETH_RxVLANConfigTypeDef; +/** + * + */ + +/** + * @brief ETH TX VLAN structure definition + */ +typedef struct +{ + FunctionalState SourceTxDesc; /*!< Enable or Disable VLAN tag source from DMA tx descriptors */ + + FunctionalState SVLANType; /*!< Enable or Disable insertion of SVLAN type */ + + uint32_t VLANTagControl; /*!< Sets the VLAN tag control in tx packets + This parameter can be a value of @ref ETHEx_VLAN_Tag_Control */ +} ETH_TxVLANConfigTypeDef; +/** + * + */ + +/** + * @brief ETH L3 filter structure definition + */ +typedef struct +{ + uint32_t Protocol; /*!< Sets the L3 filter protocol to IPv4 or IPv6 + This parameter can be a value of @ref ETHEx_L3_Protocol */ + + uint32_t SrcAddrFilterMatch; /*!< Sets the L3 filter source address match + This parameter can be a value of @ref ETHEx_L3_Source_Match */ + + uint32_t DestAddrFilterMatch; /*!< Sets the L3 filter destination address match + This parameter can be a value of @ref ETHEx_L3_Destination_Match */ + + uint32_t SrcAddrHigherBitsMatch; /*!< Sets the L3 filter source address higher bits match + This parameter can be a value from 0 to 31 */ + + uint32_t DestAddrHigherBitsMatch; /*!< Sets the L3 filter destination address higher bits match + This parameter can be a value from 0 to 31 */ + + uint32_t Ip4SrcAddr; /*!< Sets the L3 filter IPv4 source address if IPv4 protocol is used + This parameter can be a value from 0x0 to 0xFFFFFFFF */ + + uint32_t Ip4DestAddr; /*!< Sets the L3 filter IPv4 destination address if IPv4 protocol is used + This parameter can be a value from 0 to 0xFFFFFFFF */ + + uint32_t Ip6Addr[4]; /*!< Sets the L3 filter IPv6 address if IPv6 protocol is used + This parameter must be a table of 4 words (4* 32 bits) */ +} ETH_L3FilterConfigTypeDef; +/** + * + */ + +/** + * @brief ETH L4 filter structure definition + */ +typedef struct +{ + uint32_t Protocol; /*!< Sets the L4 filter protocol to TCP or UDP + This parameter can be a value of @ref ETHEx_L4_Protocol */ + + uint32_t SrcPortFilterMatch; /*!< Sets the L4 filter source port match + This parameter can be a value of @ref ETHEx_L4_Source_Match */ + + uint32_t DestPortFilterMatch; /*!< Sets the L4 filter destination port match + This parameter can be a value of @ref ETHEx_L4_Destination_Match */ + + uint32_t SourcePort; /*!< Sets the L4 filter source port + This parameter must be a value from 0x0 to 0xFFFF */ + + uint32_t DestinationPort; /*!< Sets the L4 filter destination port + This parameter must be a value from 0x0 to 0xFFFF */ +} ETH_L4FilterConfigTypeDef; +/** + * + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Constants ETHEx Exported Constants + * @{ + */ + +/** @defgroup ETHEx_LPI_Event ETHEx LPI Event + * @{ + */ +#define ETH_TX_LPI_ENTRY ETH_MACLCSR_TLPIEN +#define ETH_TX_LPI_EXIT ETH_MACLCSR_TLPIEX +#define ETH_RX_LPI_ENTRY ETH_MACLCSR_RLPIEN +#define ETH_RX_LPI_EXIT ETH_MACLCSR_RLPIEX +/** + * @} + */ + +/** @defgroup ETHEx_L3_Filter ETHEx L3 Filter + * @{ + */ +#define ETH_L3_FILTER_0 0x00000000U +#define ETH_L3_FILTER_1 0x0000000CU +/** + * @} + */ + +/** @defgroup ETHEx_L4_Filter ETHEx L4 Filter + * @{ + */ +#define ETH_L4_FILTER_0 0x00000000U +#define ETH_L4_FILTER_1 0x0000000CU +/** + * @} + */ + +/** @defgroup ETHEx_L3_Protocol ETHEx L3 Protocol + * @{ + */ +#define ETH_L3_IPV6_MATCH ETH_MACL3L4CR_L3PEN +#define ETH_L3_IPV4_MATCH 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L3_Source_Match ETHEx L3 Source Match + * @{ + */ +#define ETH_L3_SRC_ADDR_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L3SAM +#define ETH_L3_SRC_ADDR_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L3SAM | ETH_MACL3L4CR_L3SAIM) +#define ETH_L3_SRC_ADDR_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L3_Destination_Match ETHEx L3 Destination Match + * @{ + */ +#define ETH_L3_DEST_ADDR_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L3DAM +#define ETH_L3_DEST_ADDR_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L3DAM | ETH_MACL3L4CR_L3DAIM) +#define ETH_L3_DEST_ADDR_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Protocol ETHEx L4 Protocol + * @{ + */ +#define ETH_L4_UDP_MATCH ETH_MACL3L4CR_L4PEN +#define ETH_L4_TCP_MATCH 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Source_Match ETHEx L4 Source Match + * @{ + */ +#define ETH_L4_SRC_PORT_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L4SPM +#define ETH_L4_SRC_PORT_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L4SPM |ETH_MACL3L4CR_L4SPIM) +#define ETH_L4_SRC_PORT_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Destination_Match ETHEx L4 Destination Match + * @{ + */ +#define ETH_L4_DEST_PORT_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L4DPM +#define ETH_L4_DEST_PORT_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM) +#define ETH_L4_DEST_PORT_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_Rx_Inner_VLAN_Tag_Stripping ETHEx Rx Inner VLAN Tag Stripping + * @{ + */ +#define ETH_INNERVLANTAGRXSTRIPPING_NONE ETH_MACVTR_EIVLS_DONOTSTRIP +#define ETH_INNERVLANTAGRXSTRIPPING_IFPASS ETH_MACVTR_EIVLS_STRIPIFPASS +#define ETH_INNERVLANTAGRXSTRIPPING_IFFAILS ETH_MACVTR_EIVLS_STRIPIFFAILS +#define ETH_INNERVLANTAGRXSTRIPPING_ALWAYS ETH_MACVTR_EIVLS_ALWAYSSTRIP +/** + * @} + */ + +/** @defgroup ETHEx_Rx_VLAN_Tag_Stripping ETHEx Rx VLAN Tag Stripping + * @{ + */ +#define ETH_VLANTAGRXSTRIPPING_NONE ETH_MACVTR_EVLS_DONOTSTRIP +#define ETH_VLANTAGRXSTRIPPING_IFPASS ETH_MACVTR_EVLS_STRIPIFPASS +#define ETH_VLANTAGRXSTRIPPING_IFFAILS ETH_MACVTR_EVLS_STRIPIFFAILS +#define ETH_VLANTAGRXSTRIPPING_ALWAYS ETH_MACVTR_EVLS_ALWAYSSTRIP +/** + * @} + */ + +/** @defgroup ETHEx_VLAN_Type_Check ETHEx VLAN Type Check + * @{ + */ +#define ETH_VLANTYPECHECK_DISABLE ETH_MACVTR_DOVLTC +#define ETH_VLANTYPECHECK_SVLAN (ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL) +#define ETH_VLANTYPECHECK_CVLAN 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_VLAN_Tag_Control ETHEx_VLAN_Tag_Control + * @{ + */ +#define ETH_VLANTAGCONTROL_NONE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_NOVLANTAG) +#define ETH_VLANTAGCONTROL_DELETE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGDELETE) +#define ETH_VLANTAGCONTROL_INSERT (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGINSERT) +#define ETH_VLANTAGCONTROL_REPLACE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGREPLACE) +/** + * @} + */ + +/** @defgroup ETHEx_Tx_VLAN_Tag ETHEx Tx VLAN Tag + * @{ + */ +#define ETH_INNER_TX_VLANTAG 0x00000001U +#define ETH_OUTER_TX_VLANTAG 0x00000000U +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ETHEx_Exported_Functions + * @{ + */ + +/** @addtogroup ETHEx_Exported_Functions_Group1 + * @{ + */ +/* MAC ARP Offloading APIs ***************************************************/ +void HAL_ETHEx_EnableARPOffload(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableARPOffload(ETH_HandleTypeDef *heth); +void HAL_ETHEx_SetARPAddressMatch(ETH_HandleTypeDef *heth, uint32_t IpAddress); + +/* MAC L3 L4 Filtering APIs ***************************************************/ +void HAL_ETHEx_EnableL3L4Filtering(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableL3L4Filtering(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETHEx_GetL3FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L3FilterConfigTypeDef *pL3FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_GetL4FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L4FilterConfigTypeDef *pL4FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_SetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L3FilterConfigTypeDef *pL3FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_SetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L4FilterConfigTypeDef *pL4FilterConfig); + +/* MAC VLAN Processing APIs ************************************************/ +void HAL_ETHEx_EnableVLANProcessing(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableVLANProcessing(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETHEx_GetRxVLANConfig(const ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig); +HAL_StatusTypeDef HAL_ETHEx_SetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig); +void HAL_ETHEx_SetVLANHashTable(ETH_HandleTypeDef *heth, uint32_t VLANHashTable); +HAL_StatusTypeDef HAL_ETHEx_GetTxVLANConfig(const ETH_HandleTypeDef *heth, uint32_t VLANTag, + ETH_TxVLANConfigTypeDef *pVlanConfig); +HAL_StatusTypeDef HAL_ETHEx_SetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag, + const ETH_TxVLANConfigTypeDef *pVlanConfig); +void HAL_ETHEx_SetTxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t VLANTag, uint32_t VLANIdentifier); + +/* Energy Efficient Ethernet APIs *********************************************/ +void HAL_ETHEx_EnterLPIMode(ETH_HandleTypeDef *heth, FunctionalState TxAutomate, + FunctionalState TxClockStop); +void HAL_ETHEx_ExitLPIMode(ETH_HandleTypeDef *heth); +uint32_t HAL_ETHEx_GetMACLPIEvent(const ETH_HandleTypeDef *heth); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_ETH_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_exti.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_exti.h new file mode 100644 index 000000000..4c8ff5f61 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_exti.h @@ -0,0 +1,347 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_EXTI_H +#define STM32H7RSxx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_41 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_42 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_43 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_44 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_45 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_46 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_47 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_48 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_49 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_50 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_51 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_54 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_55 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_56 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_57 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_58 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_59 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_77 (EXTI_DIRECT | EXTI_REG3 | EXTI_EVENT | 0x0Du) +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#define EXTI_GPIOE 0x00000004u +#define EXTI_GPIOF 0x00000005u +#define EXTI_GPIOG 0x00000006u +#define EXTI_GPIOH 0x00000007u +#define EXTI_GPIOM 0x0000000Cu +#define EXTI_GPION 0x0000000Du +#define EXTI_GPIOO 0x0000000Eu +#define EXTI_GPIOP 0x0000000Fu +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Event presence definition + */ +#define EXTI_EVENT_PRESENCE_SHIFT 28u +#define EXTI_EVENT (0x01uL << EXTI_EVENT_PRESENCE_SHIFT) +#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG3 (0x02uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2 | EXTI_REG3) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#define EXTI_LINE_NB 78u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + ((((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u))) || \ + (((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x0002000DUL))) + +#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOM) || \ + ((__PORT__) == EXTI_GPION) || \ + ((__PORT__) == EXTI_GPIOO) || \ + ((__PORT__) == EXTI_GPIOP)) + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(const EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(const EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(const EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(const EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(const EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_EXTI_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_fdcan.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_fdcan.h new file mode 100644 index 000000000..162942127 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_fdcan.h @@ -0,0 +1,1442 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_fdcan.h + * @author MCD Application Team + * @brief Header file of FDCAN HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_FDCAN_H +#define STM32H7RSxx_HAL_FDCAN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup FDCAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Types FDCAN Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_FDCAN_STATE_RESET = 0x00U, /*!< FDCAN not yet initialized or disabled */ + HAL_FDCAN_STATE_READY = 0x01U, /*!< FDCAN initialized and ready for use */ + HAL_FDCAN_STATE_BUSY = 0x02U, /*!< FDCAN process is ongoing */ + HAL_FDCAN_STATE_ERROR = 0x03U /*!< FDCAN error state */ +} HAL_FDCAN_StateTypeDef; + +/** + * @brief FDCAN Init structure definition + */ +typedef struct +{ + uint32_t ClockDivider; /*!< Specifies the FDCAN kernel clock divider. + The clock is common to all FDCAN instances. + This parameter is applied only at initialisation of + first FDCAN instance. + This parameter can be a value of @ref FDCAN_clock_divider. */ + + uint32_t FrameFormat; /*!< Specifies the FDCAN frame format. + This parameter can be a value of @ref FDCAN_frame_format */ + + uint32_t Mode; /*!< Specifies the FDCAN mode. + This parameter can be a value of @ref FDCAN_operating_mode */ + + FunctionalState AutoRetransmission; /*!< Enable or disable the automatic retransmission mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState TransmitPause; /*!< Enable or disable the Transmit Pause feature. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ProtocolException; /*!< Enable or disable the Protocol Exception Handling. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t NominalPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the nominal bit time quanta. + This parameter must be a number between 1 and 512 */ + + uint32_t NominalSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a bit to perform + resynchronization. + This parameter must be a number between 1 and 128 */ + + uint32_t NominalTimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1. + This parameter must be a number between 2 and 256 */ + + uint32_t NominalTimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter must be a number between 2 and 128 */ + + uint32_t DataPrescaler; /*!< Specifies the value by which the oscillator frequency is + divided for generating the data bit time quanta. + This parameter must be a number between 1 and 32 */ + + uint32_t DataSyncJumpWidth; /*!< Specifies the maximum number of time quanta the FDCAN + hardware is allowed to lengthen or shorten a data bit to + perform resynchronization. + This parameter must be a number between 1 and 16 */ + + uint32_t DataTimeSeg1; /*!< Specifies the number of time quanta in Data Bit Segment 1. + This parameter must be a number between 1 and 32 */ + + uint32_t DataTimeSeg2; /*!< Specifies the number of time quanta in Data Bit Segment 2. + This parameter must be a number between 1 and 16 */ + + uint32_t StdFiltersNbr; /*!< Specifies the number of standard Message ID filters. + This parameter must be a number between 0 and 28 */ + + uint32_t ExtFiltersNbr; /*!< Specifies the number of extended Message ID filters. + This parameter must be a number between 0 and 8 */ + + uint32_t TxFifoQueueMode; /*!< Tx FIFO/Queue Mode selection. + This parameter can be a value of @ref FDCAN_txFifoQueue_Mode */ + +} FDCAN_InitTypeDef; + +/** + * @brief FDCAN filter structure definition + */ +typedef struct +{ + uint32_t IdType; /*!< Specifies the identifier type. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t FilterIndex; /*!< Specifies the filter which will be initialized. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterType; /*!< Specifies the filter type. + This parameter can be a value of @ref FDCAN_filter_type. + The value FDCAN_FILTER_RANGE_NO_EIDM is permitted + only when IdType is FDCAN_EXTENDED_ID. */ + + uint32_t FilterConfig; /*!< Specifies the filter configuration. + This parameter can be a value of @ref FDCAN_filter_config */ + + uint32_t FilterID1; /*!< Specifies the filter identification 1. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t FilterID2; /*!< Specifies the filter identification 2. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + +} FDCAN_FilterTypeDef; + +/** + * @brief FDCAN Tx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the message that will be + transmitted. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the message that will be transmitted. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the frame that will be transmitted. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame will be transmitted with or without + bit rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame will be transmitted in classic or + FD format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxEventFifoControl; /*!< Specifies the event FIFO control. + This parameter can be a value of @ref FDCAN_EFC */ + + uint32_t MessageMarker; /*!< Specifies the message marker to be copied into Tx Event FIFO + element for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + +} FDCAN_TxHeaderTypeDef; + +/** + * @brief FDCAN Rx header structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type of the received message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t RxFrameType; /*!< Specifies the the received message frame type. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the received frame length. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Rx frame is received with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Rx frame is received in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t RxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + reception. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FilterIndex; /*!< Specifies the index of matching Rx acceptance filter element. + This parameter must be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if IdType is FDCAN_STANDARD_ID + - 0 and (SRAMCAN_FLE_NBR-1), if IdType is FDCAN_EXTENDED_ID + When the frame is a Non-Filter matching frame, this parameter + is unused. */ + + uint32_t IsFilterMatchingFrame; /*!< Specifies whether the accepted frame did not match any Rx filter. + Acceptance of non-matching frames may be enabled via + HAL_FDCAN_ConfigGlobalFilter(). + This parameter takes 0 if the frame matched an Rx filter or + 1 if it did not match any Rx filter */ + +} FDCAN_RxHeaderTypeDef; + +/** + * @brief FDCAN Tx event FIFO structure definition + */ +typedef struct +{ + uint32_t Identifier; /*!< Specifies the identifier. + This parameter must be a number between: + - 0 and 0x7FF, if IdType is FDCAN_STANDARD_ID + - 0 and 0x1FFFFFFF, if IdType is FDCAN_EXTENDED_ID */ + + uint32_t IdType; /*!< Specifies the identifier type for the transmitted message. + This parameter can be a value of @ref FDCAN_id_type */ + + uint32_t TxFrameType; /*!< Specifies the frame type of the transmitted message. + This parameter can be a value of @ref FDCAN_frame_type */ + + uint32_t DataLength; /*!< Specifies the length of the transmitted frame. + This parameter can be a value of @ref FDCAN_data_length_code */ + + uint32_t ErrorStateIndicator; /*!< Specifies the error state indicator. + This parameter can be a value of @ref FDCAN_error_state_indicator */ + + uint32_t BitRateSwitch; /*!< Specifies whether the Tx frame is transmitted with or without bit + rate switching. + This parameter can be a value of @ref FDCAN_bit_rate_switching */ + + uint32_t FDFormat; /*!< Specifies whether the Tx frame is transmitted in classic or FD + format. + This parameter can be a value of @ref FDCAN_format */ + + uint32_t TxTimestamp; /*!< Specifies the timestamp counter value captured on start of frame + transmission. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t MessageMarker; /*!< Specifies the message marker copied into Tx Event FIFO element + for identification of Tx message status. + This parameter must be a number between 0 and 0xFF */ + + uint32_t EventType; /*!< Specifies the event type. + This parameter can be a value of @ref FDCAN_event_type */ + +} FDCAN_TxEventFifoTypeDef; + +/** + * @brief FDCAN High Priority Message Status structure definition + */ +typedef struct +{ + uint32_t FilterList; /*!< Specifies the filter list of the matching filter element. + This parameter can be: + - 0 : Standard Filter List + - 1 : Extended Filter List */ + + uint32_t FilterIndex; /*!< Specifies the index of matching filter element. + This parameter can be a number between: + - 0 and (SRAMCAN_FLS_NBR-1), if FilterList is 0 (Standard) + - 0 and (SRAMCAN_FLE_NBR-1), if FilterList is 1 (Extended) */ + + uint32_t MessageStorage; /*!< Specifies the HP Message Storage. + This parameter can be a value of @ref FDCAN_hp_msg_storage */ + + uint32_t MessageIndex; /*!< Specifies the Index of Rx FIFO element to which the + message was stored. + This parameter is valid only when MessageStorage is: + FDCAN_HP_STORAGE_RXFIFO0 + or + FDCAN_HP_STORAGE_RXFIFO1 */ + +} FDCAN_HpMsgStatusTypeDef; + +/** + * @brief FDCAN Protocol Status structure definition + */ +typedef struct +{ + uint32_t LastErrorCode; /*!< Specifies the type of the last error that occurred on the FDCAN bus. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t DataLastErrorCode; /*!< Specifies the type of the last error that occurred in the data phase + of a CAN FD format frame with its BRS flag set. + This parameter can be a value of @ref FDCAN_protocol_error_code */ + + uint32_t Activity; /*!< Specifies the FDCAN module communication state. + This parameter can be a value of @ref FDCAN_communication_state */ + + uint32_t ErrorPassive; /*!< Specifies the FDCAN module error status. + This parameter can be: + - 0 : The FDCAN is in Error_Active state + - 1 : The FDCAN is in Error_Passive state */ + + uint32_t Warning; /*!< Specifies the FDCAN module warning status. + This parameter can be: + - 0 : error counters (RxErrorCnt and TxErrorCnt) are below the + Error_Warning limit of 96 + - 1 : at least one of error counters has reached the Error_Warning + limit of 96 */ + + uint32_t BusOff; /*!< Specifies the FDCAN module Bus_Off status. + This parameter can be: + - 0 : The FDCAN is not in Bus_Off state + - 1 : The FDCAN is in Bus_Off state */ + + uint32_t RxESIflag; /*!< Specifies ESI flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its ESI flag set + - 1 : Last received CAN FD message had its ESI flag set */ + + uint32_t RxBRSflag; /*!< Specifies BRS flag of last received CAN FD message. + This parameter can be: + - 0 : Last received CAN FD message did not have its BRS flag set + - 1 : Last received CAN FD message had its BRS flag set */ + + uint32_t RxFDFflag; /*!< Specifies if CAN FD message (FDF flag set) has been received + since last protocol status. + This parameter can be: + - 0 : No CAN FD message received + - 1 : CAN FD message received */ + + uint32_t ProtocolException; /*!< Specifies the FDCAN module Protocol Exception status. + This parameter can be: + - 0 : No protocol exception event occurred since last read access + - 1 : Protocol exception event occurred */ + + uint32_t TDCvalue; /*!< Specifies the Transmitter Delay Compensation Value. + This parameter can be a number between 0 and 127 */ + +} FDCAN_ProtocolStatusTypeDef; + +/** + * @brief FDCAN Error Counters structure definition + */ +typedef struct +{ + uint32_t TxErrorCnt; /*!< Specifies the Transmit Error Counter Value. + This parameter can be a number between 0 and 255 */ + + uint32_t RxErrorCnt; /*!< Specifies the Receive Error Counter Value. + This parameter can be a number between 0 and 127 */ + + uint32_t RxErrorPassive; /*!< Specifies the Receive Error Passive status. + This parameter can be: + - 0 : The Receive Error Counter (RxErrorCnt) is below the error + passive level of 128 + - 1 : The Receive Error Counter (RxErrorCnt) has reached the error + passive level of 128 */ + + uint32_t ErrorLogging; /*!< Specifies the Transmit/Receive error logging counter value. + This parameter can be a number between 0 and 255. + This counter is incremented each time when a FDCAN protocol error causes + the TxErrorCnt or the RxErrorCnt to be incremented. The counter stops at 255; + the next increment of TxErrorCnt or RxErrorCnt sets interrupt flag + FDCAN_FLAG_ERROR_LOGGING_OVERFLOW */ + +} FDCAN_ErrorCountersTypeDef; + +/** + * @brief FDCAN Message RAM blocks + */ +typedef struct +{ + uint32_t StandardFilterSA; /*!< Specifies the Standard Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t ExtendedFilterSA; /*!< Specifies the Extended Filter List Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO0SA; /*!< Specifies the Rx FIFO 0 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t RxFIFO1SA; /*!< Specifies the Rx FIFO 1 Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxEventFIFOSA; /*!< Specifies the Tx Event FIFO Start Address. + This parameter must be a 32-bit word address */ + + uint32_t TxFIFOQSA; /*!< Specifies the Tx FIFO/Queue Start Address. + This parameter must be a 32-bit word address */ + +} FDCAN_MsgRamAddressTypeDef; + +/** + * @brief FDCAN handle structure definition + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +typedef struct __FDCAN_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +{ + FDCAN_GlobalTypeDef *Instance; /*!< Register base address */ + + FDCAN_InitTypeDef Init; /*!< FDCAN required parameters */ + + FDCAN_MsgRamAddressTypeDef msgRam; /*!< FDCAN Message RAM blocks */ + + uint32_t LatestTxFifoQRequest; /*!< FDCAN Tx buffer index + of latest Tx FIFO/Queue request */ + + __IO HAL_FDCAN_StateTypeDef State; /*!< FDCAN communication state */ + + HAL_LockTypeDef Lock; /*!< FDCAN locking object */ + + __IO uint32_t ErrorCode; /*!< FDCAN Error code */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + void (* TxEventFifoCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< FDCAN Tx Event Fifo callback */ + void (* RxFifo0Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< FDCAN Rx Fifo 0 callback */ + void (* RxFifo1Callback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< FDCAN Rx Fifo 1 callback */ + void (* TxFifoEmptyCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Tx Fifo Empty callback */ + void (* TxBufferCompleteCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer complete callback */ + void (* TxBufferAbortCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< FDCAN Tx Buffer abort callback */ + void (* HighPriorityMessageCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN High priority message callback */ + void (* TimestampWraparoundCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timestamp wraparound callback */ + void (* TimeoutOccurredCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Timeout occurred callback */ + void (* ErrorCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Error callback */ + void (* ErrorStatusCallback)(struct __FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< FDCAN Error status callback */ + + void (* MspInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp Init callback */ + void (* MspDeInitCallback)(struct __FDCAN_HandleTypeDef *hfdcan); /*!< FDCAN Msp DeInit callback */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +} FDCAN_HandleTypeDef; + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief HAL FDCAN common Callback ID enumeration definition + */ +typedef enum +{ + HAL_FDCAN_TX_FIFO_EMPTY_CB_ID = 0x00U, /*!< FDCAN Tx Fifo Empty callback ID */ + HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID = 0x01U, /*!< FDCAN High priority message callback ID */ + HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID = 0x02U, /*!< FDCAN Timestamp wraparound callback ID */ + HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID = 0x03U, /*!< FDCAN Timeout occurred callback ID */ + HAL_FDCAN_ERROR_CALLBACK_CB_ID = 0x04U, /*!< FDCAN Error callback ID */ + + HAL_FDCAN_MSPINIT_CB_ID = 0x05U, /*!< FDCAN MspInit callback ID */ + HAL_FDCAN_MSPDEINIT_CB_ID = 0x06U, /*!< FDCAN MspDeInit callback ID */ + +} HAL_FDCAN_CallbackIDTypeDef; + +/** + * @brief HAL FDCAN Callback pointer definition + */ +typedef void (*pFDCAN_CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan); /*!< pointer to a common FDCAN callback function */ +typedef void (*pFDCAN_TxEventFifoCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); /*!< pointer to Tx event Fifo FDCAN callback function */ +typedef void (*pFDCAN_RxFifo0CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); /*!< pointer to Rx Fifo 0 FDCAN callback function */ +typedef void (*pFDCAN_RxFifo1CallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); /*!< pointer to Rx Fifo 1 FDCAN callback function */ +typedef void (*pFDCAN_TxBufferCompleteCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer complete FDCAN callback function */ +typedef void (*pFDCAN_TxBufferAbortCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); /*!< pointer to Tx Buffer abort FDCAN callback function */ +typedef void (*pFDCAN_ErrorStatusCallbackTypeDef)(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); /*!< pointer to Error Status callback function */ + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Constants FDCAN Exported Constants + * @{ + */ + +/** @defgroup HAL_FDCAN_Error_Code HAL FDCAN Error Code + * @{ + */ +#define HAL_FDCAN_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_FDCAN_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ +#define HAL_FDCAN_ERROR_NOT_INITIALIZED ((uint32_t)0x00000002U) /*!< Peripheral not initialized */ +#define HAL_FDCAN_ERROR_NOT_READY ((uint32_t)0x00000004U) /*!< Peripheral not ready */ +#define HAL_FDCAN_ERROR_NOT_STARTED ((uint32_t)0x00000008U) /*!< Peripheral not started */ +#define HAL_FDCAN_ERROR_NOT_SUPPORTED ((uint32_t)0x00000010U) /*!< Mode not supported */ +#define HAL_FDCAN_ERROR_PARAM ((uint32_t)0x00000020U) /*!< Parameter error */ +#define HAL_FDCAN_ERROR_PENDING ((uint32_t)0x00000040U) /*!< Pending operation */ +#define HAL_FDCAN_ERROR_RAM_ACCESS ((uint32_t)0x00000080U) /*!< Message RAM Access Failure */ +#define HAL_FDCAN_ERROR_FIFO_EMPTY ((uint32_t)0x00000100U) /*!< Put element in full FIFO */ +#define HAL_FDCAN_ERROR_FIFO_FULL ((uint32_t)0x00000200U) /*!< Get element from empty FIFO */ +#define HAL_FDCAN_ERROR_LOG_OVERFLOW FDCAN_IR_ELO /*!< Overflow of CAN Error Logging Counter */ +#define HAL_FDCAN_ERROR_RAM_WDG FDCAN_IR_WDI /*!< Message RAM Watchdog event occurred */ +#define HAL_FDCAN_ERROR_PROTOCOL_ARBT FDCAN_IR_PEA /*!< Protocol Error in Arbitration Phase (Nominal Bit Time is used) */ +#define HAL_FDCAN_ERROR_PROTOCOL_DATA FDCAN_IR_PED /*!< Protocol Error in Data Phase (Data Bit Time is used) */ +#define HAL_FDCAN_ERROR_RESERVED_AREA FDCAN_IR_ARA /*!< Access to Reserved Address */ + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define HAL_FDCAN_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_format FDCAN Frame Format + * @{ + */ +#define FDCAN_FRAME_CLASSIC ((uint32_t)0x00000000U) /*!< Classic mode */ +#define FDCAN_FRAME_FD_NO_BRS ((uint32_t)FDCAN_CCCR_FDOE) /*!< FD mode without BitRate Switching */ +#define FDCAN_FRAME_FD_BRS ((uint32_t)(FDCAN_CCCR_FDOE | FDCAN_CCCR_BRSE)) /*!< FD mode with BitRate Switching */ +/** + * @} + */ + +/** @defgroup FDCAN_operating_mode FDCAN Operating Mode + * @{ + */ +#define FDCAN_MODE_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */ +#define FDCAN_MODE_RESTRICTED_OPERATION ((uint32_t)0x00000001U) /*!< Restricted Operation mode */ +#define FDCAN_MODE_BUS_MONITORING ((uint32_t)0x00000002U) /*!< Bus Monitoring mode */ +#define FDCAN_MODE_INTERNAL_LOOPBACK ((uint32_t)0x00000003U) /*!< Internal LoopBack mode */ +#define FDCAN_MODE_EXTERNAL_LOOPBACK ((uint32_t)0x00000004U) /*!< External LoopBack mode */ +/** + * @} + */ + +/** @defgroup FDCAN_clock_divider FDCAN Clock Divider + * @{ + */ +#define FDCAN_CLOCK_DIV1 ((uint32_t)0x00000000U) /*!< Divide kernel clock by 1 */ +#define FDCAN_CLOCK_DIV2 ((uint32_t)0x00000001U) /*!< Divide kernel clock by 2 */ +#define FDCAN_CLOCK_DIV4 ((uint32_t)0x00000002U) /*!< Divide kernel clock by 4 */ +#define FDCAN_CLOCK_DIV6 ((uint32_t)0x00000003U) /*!< Divide kernel clock by 6 */ +#define FDCAN_CLOCK_DIV8 ((uint32_t)0x00000004U) /*!< Divide kernel clock by 8 */ +#define FDCAN_CLOCK_DIV10 ((uint32_t)0x00000005U) /*!< Divide kernel clock by 10 */ +#define FDCAN_CLOCK_DIV12 ((uint32_t)0x00000006U) /*!< Divide kernel clock by 12 */ +#define FDCAN_CLOCK_DIV14 ((uint32_t)0x00000007U) /*!< Divide kernel clock by 14 */ +#define FDCAN_CLOCK_DIV16 ((uint32_t)0x00000008U) /*!< Divide kernel clock by 16 */ +#define FDCAN_CLOCK_DIV18 ((uint32_t)0x00000009U) /*!< Divide kernel clock by 18 */ +#define FDCAN_CLOCK_DIV20 ((uint32_t)0x0000000AU) /*!< Divide kernel clock by 20 */ +#define FDCAN_CLOCK_DIV22 ((uint32_t)0x0000000BU) /*!< Divide kernel clock by 22 */ +#define FDCAN_CLOCK_DIV24 ((uint32_t)0x0000000CU) /*!< Divide kernel clock by 24 */ +#define FDCAN_CLOCK_DIV26 ((uint32_t)0x0000000DU) /*!< Divide kernel clock by 26 */ +#define FDCAN_CLOCK_DIV28 ((uint32_t)0x0000000EU) /*!< Divide kernel clock by 28 */ +#define FDCAN_CLOCK_DIV30 ((uint32_t)0x0000000FU) /*!< Divide kernel clock by 30 */ +/** + * @} + */ + +/** @defgroup FDCAN_txFifoQueue_Mode FDCAN Tx FIFO/Queue Mode + * @{ + */ +#define FDCAN_TX_FIFO_OPERATION ((uint32_t)0x00000000U) /*!< FIFO mode */ +#define FDCAN_TX_QUEUE_OPERATION ((uint32_t)FDCAN_TXBC_TFQM) /*!< Queue mode */ +/** + * @} + */ + +/** @defgroup FDCAN_id_type FDCAN ID Type + * @{ + */ +#define FDCAN_STANDARD_ID ((uint32_t)0x00000000U) /*!< Standard ID element */ +#define FDCAN_EXTENDED_ID ((uint32_t)0x40000000U) /*!< Extended ID element */ +/** + * @} + */ + +/** @defgroup FDCAN_frame_type FDCAN Frame Type + * @{ + */ +#define FDCAN_DATA_FRAME ((uint32_t)0x00000000U) /*!< Data frame */ +#define FDCAN_REMOTE_FRAME ((uint32_t)0x20000000U) /*!< Remote frame */ +/** + * @} + */ + +/** @defgroup FDCAN_data_length_code FDCAN Data Length Code + * @{ + */ +#define FDCAN_DLC_BYTES_0 ((uint32_t)0x00000000U) /*!< 0 bytes data field */ +#define FDCAN_DLC_BYTES_1 ((uint32_t)0x00000001U) /*!< 1 bytes data field */ +#define FDCAN_DLC_BYTES_2 ((uint32_t)0x00000002U) /*!< 2 bytes data field */ +#define FDCAN_DLC_BYTES_3 ((uint32_t)0x00000003U) /*!< 3 bytes data field */ +#define FDCAN_DLC_BYTES_4 ((uint32_t)0x00000004U) /*!< 4 bytes data field */ +#define FDCAN_DLC_BYTES_5 ((uint32_t)0x00000005U) /*!< 5 bytes data field */ +#define FDCAN_DLC_BYTES_6 ((uint32_t)0x00000006U) /*!< 6 bytes data field */ +#define FDCAN_DLC_BYTES_7 ((uint32_t)0x00000007U) /*!< 7 bytes data field */ +#define FDCAN_DLC_BYTES_8 ((uint32_t)0x00000008U) /*!< 8 bytes data field */ +#define FDCAN_DLC_BYTES_12 ((uint32_t)0x00000009U) /*!< 12 bytes data field */ +#define FDCAN_DLC_BYTES_16 ((uint32_t)0x0000000AU) /*!< 16 bytes data field */ +#define FDCAN_DLC_BYTES_20 ((uint32_t)0x0000000BU) /*!< 20 bytes data field */ +#define FDCAN_DLC_BYTES_24 ((uint32_t)0x0000000CU) /*!< 24 bytes data field */ +#define FDCAN_DLC_BYTES_32 ((uint32_t)0x0000000DU) /*!< 32 bytes data field */ +#define FDCAN_DLC_BYTES_48 ((uint32_t)0x0000000EU) /*!< 48 bytes data field */ +#define FDCAN_DLC_BYTES_64 ((uint32_t)0x0000000FU) /*!< 64 bytes data field */ +/** + * @} + */ + +/** @defgroup FDCAN_error_state_indicator FDCAN Error State Indicator + * @{ + */ +#define FDCAN_ESI_ACTIVE ((uint32_t)0x00000000U) /*!< Transmitting node is error active */ +#define FDCAN_ESI_PASSIVE ((uint32_t)0x80000000U) /*!< Transmitting node is error passive */ +/** + * @} + */ + +/** @defgroup FDCAN_bit_rate_switching FDCAN Bit Rate Switching + * @{ + */ +#define FDCAN_BRS_OFF ((uint32_t)0x00000000U) /*!< FDCAN frames transmitted/received without bit rate switching */ +#define FDCAN_BRS_ON ((uint32_t)0x00100000U) /*!< FDCAN frames transmitted/received with bit rate switching */ +/** + * @} + */ + +/** @defgroup FDCAN_format FDCAN format + * @{ + */ +#define FDCAN_CLASSIC_CAN ((uint32_t)0x00000000U) /*!< Frame transmitted/received in Classic CAN format */ +#define FDCAN_FD_CAN ((uint32_t)0x00200000U) /*!< Frame transmitted/received in FDCAN format */ +/** + * @} + */ + +/** @defgroup FDCAN_EFC FDCAN Event FIFO control + * @{ + */ +#define FDCAN_NO_TX_EVENTS ((uint32_t)0x00000000U) /*!< Do not store Tx events */ +#define FDCAN_STORE_TX_EVENTS ((uint32_t)0x00800000U) /*!< Store Tx events */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_type FDCAN Filter Type + * @{ + */ +#define FDCAN_FILTER_RANGE ((uint32_t)0x00000000U) /*!< Range filter from FilterID1 to FilterID2 */ +#define FDCAN_FILTER_DUAL ((uint32_t)0x00000001U) /*!< Dual ID filter for FilterID1 or FilterID2 */ +#define FDCAN_FILTER_MASK ((uint32_t)0x00000002U) /*!< Classic filter: FilterID1 = filter, FilterID2 = mask */ +#define FDCAN_FILTER_RANGE_NO_EIDM ((uint32_t)0x00000003U) /*!< Range filter from FilterID1 to FilterID2, EIDM mask not applied */ +/** + * @} + */ + +/** @defgroup FDCAN_filter_config FDCAN Filter Configuration + * @{ + */ +#define FDCAN_FILTER_DISABLE ((uint32_t)0x00000000U) /*!< Disable filter element */ +#define FDCAN_FILTER_TO_RXFIFO0 ((uint32_t)0x00000001U) /*!< Store in Rx FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1 ((uint32_t)0x00000002U) /*!< Store in Rx FIFO 1 if filter matches */ +#define FDCAN_FILTER_REJECT ((uint32_t)0x00000003U) /*!< Reject ID if filter matches */ +#define FDCAN_FILTER_HP ((uint32_t)0x00000004U) /*!< Set high priority if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO0_HP ((uint32_t)0x00000005U) /*!< Set high priority and store in FIFO 0 if filter matches */ +#define FDCAN_FILTER_TO_RXFIFO1_HP ((uint32_t)0x00000006U) /*!< Set high priority and store in FIFO 1 if filter matches */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_location FDCAN Tx Location + * @{ + */ +#define FDCAN_TX_BUFFER0 ((uint32_t)0x00000001U) /*!< Add message to Tx Buffer 0 */ +#define FDCAN_TX_BUFFER1 ((uint32_t)0x00000002U) /*!< Add message to Tx Buffer 1 */ +#define FDCAN_TX_BUFFER2 ((uint32_t)0x00000004U) /*!< Add message to Tx Buffer 2 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_location FDCAN Rx Location + * @{ + */ +#define FDCAN_RX_FIFO0 ((uint32_t)0x00000040U) /*!< Get received message from Rx FIFO 0 */ +#define FDCAN_RX_FIFO1 ((uint32_t)0x00000041U) /*!< Get received message from Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_event_type FDCAN Event Type + * @{ + */ +#define FDCAN_TX_EVENT ((uint32_t)0x00400000U) /*!< Tx event */ +#define FDCAN_TX_IN_SPITE_OF_ABORT ((uint32_t)0x00800000U) /*!< Transmission in spite of cancellation */ +/** + * @} + */ + +/** @defgroup FDCAN_hp_msg_storage FDCAN High Priority Message Storage + * @{ + */ +#define FDCAN_HP_STORAGE_NO_FIFO ((uint32_t)0x00000000U) /*!< No FIFO selected */ +#define FDCAN_HP_STORAGE_MSG_LOST ((uint32_t)0x00000040U) /*!< FIFO message lost */ +#define FDCAN_HP_STORAGE_RXFIFO0 ((uint32_t)0x00000080U) /*!< Message stored in FIFO 0 */ +#define FDCAN_HP_STORAGE_RXFIFO1 ((uint32_t)0x000000C0U) /*!< Message stored in FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_protocol_error_code FDCAN protocol error code + * @{ + */ +#define FDCAN_PROTOCOL_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error occurred */ +#define FDCAN_PROTOCOL_ERROR_STUFF ((uint32_t)0x00000001U) /*!< Stuff error */ +#define FDCAN_PROTOCOL_ERROR_FORM ((uint32_t)0x00000002U) /*!< Form error */ +#define FDCAN_PROTOCOL_ERROR_ACK ((uint32_t)0x00000003U) /*!< Acknowledge error */ +#define FDCAN_PROTOCOL_ERROR_BIT1 ((uint32_t)0x00000004U) /*!< Bit 1 (recessive) error */ +#define FDCAN_PROTOCOL_ERROR_BIT0 ((uint32_t)0x00000005U) /*!< Bit 0 (dominant) error */ +#define FDCAN_PROTOCOL_ERROR_CRC ((uint32_t)0x00000006U) /*!< CRC check sum error */ +#define FDCAN_PROTOCOL_ERROR_NO_CHANGE ((uint32_t)0x00000007U) /*!< No change since last read */ +/** + * @} + */ + +/** @defgroup FDCAN_communication_state FDCAN communication state + * @{ + */ +#define FDCAN_COM_STATE_SYNC ((uint32_t)0x00000000U) /*!< Node is synchronizing on CAN communication */ +#define FDCAN_COM_STATE_IDLE ((uint32_t)0x00000008U) /*!< Node is neither receiver nor transmitter */ +#define FDCAN_COM_STATE_RX ((uint32_t)0x00000010U) /*!< Node is operating as receiver */ +#define FDCAN_COM_STATE_TX ((uint32_t)0x00000018U) /*!< Node is operating as transmitter */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_FIFO_operation_mode FDCAN FIFO operation mode + * @{ + */ +#define FDCAN_RX_FIFO_BLOCKING ((uint32_t)0x00000000U) /*!< Rx FIFO blocking mode */ +#define FDCAN_RX_FIFO_OVERWRITE ((uint32_t)0x00000001U) /*!< Rx FIFO overwrite mode */ +/** + * @} + */ + +/** @defgroup FDCAN_Non_Matching_Frames FDCAN non-matching frames + * @{ + */ +#define FDCAN_ACCEPT_IN_RX_FIFO0 ((uint32_t)0x00000000U) /*!< Accept in Rx FIFO 0 */ +#define FDCAN_ACCEPT_IN_RX_FIFO1 ((uint32_t)0x00000001U) /*!< Accept in Rx FIFO 1 */ +#define FDCAN_REJECT ((uint32_t)0x00000002U) /*!< Reject */ +/** + * @} + */ + +/** @defgroup FDCAN_Reject_Remote_Frames FDCAN reject remote frames + * @{ + */ +#define FDCAN_FILTER_REMOTE ((uint32_t)0x00000000U) /*!< Filter remote frames */ +#define FDCAN_REJECT_REMOTE ((uint32_t)0x00000001U) /*!< Reject all remote frames */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupt_Line FDCAN interrupt line + * @{ + */ +#define FDCAN_INTERRUPT_LINE0 ((uint32_t)0x00000001U) /*!< Interrupt Line 0 */ +#define FDCAN_INTERRUPT_LINE1 ((uint32_t)0x00000002U) /*!< Interrupt Line 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp FDCAN timestamp + * @{ + */ +#define FDCAN_TIMESTAMP_INTERNAL ((uint32_t)0x00000001U) /*!< Timestamp counter value incremented according to TCP */ +#define FDCAN_TIMESTAMP_EXTERNAL ((uint32_t)0x00000002U) /*!< External timestamp counter value used */ +/** + * @} + */ + +/** @defgroup FDCAN_Timestamp_Prescaler FDCAN timestamp prescaler + * @{ + */ +#define FDCAN_TIMESTAMP_PRESC_1 ((uint32_t)0x00000000U) /*!< Timestamp counter time unit in equal to CAN bit time */ +#define FDCAN_TIMESTAMP_PRESC_2 ((uint32_t)0x00010000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 2 */ +#define FDCAN_TIMESTAMP_PRESC_3 ((uint32_t)0x00020000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 3 */ +#define FDCAN_TIMESTAMP_PRESC_4 ((uint32_t)0x00030000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 4 */ +#define FDCAN_TIMESTAMP_PRESC_5 ((uint32_t)0x00040000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 5 */ +#define FDCAN_TIMESTAMP_PRESC_6 ((uint32_t)0x00050000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 6 */ +#define FDCAN_TIMESTAMP_PRESC_7 ((uint32_t)0x00060000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 7 */ +#define FDCAN_TIMESTAMP_PRESC_8 ((uint32_t)0x00070000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 8 */ +#define FDCAN_TIMESTAMP_PRESC_9 ((uint32_t)0x00080000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 9 */ +#define FDCAN_TIMESTAMP_PRESC_10 ((uint32_t)0x00090000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 10 */ +#define FDCAN_TIMESTAMP_PRESC_11 ((uint32_t)0x000A0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 11 */ +#define FDCAN_TIMESTAMP_PRESC_12 ((uint32_t)0x000B0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 12 */ +#define FDCAN_TIMESTAMP_PRESC_13 ((uint32_t)0x000C0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 13 */ +#define FDCAN_TIMESTAMP_PRESC_14 ((uint32_t)0x000D0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 14 */ +#define FDCAN_TIMESTAMP_PRESC_15 ((uint32_t)0x000E0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 15 */ +#define FDCAN_TIMESTAMP_PRESC_16 ((uint32_t)0x000F0000U) /*!< Timestamp counter time unit in equal to CAN bit time multiplied by 16 */ +/** + * @} + */ + +/** @defgroup FDCAN_Timeout_Operation FDCAN timeout operation + * @{ + */ +#define FDCAN_TIMEOUT_CONTINUOUS ((uint32_t)0x00000000U) /*!< Timeout continuous operation */ +#define FDCAN_TIMEOUT_TX_EVENT_FIFO ((uint32_t)0x00000002U) /*!< Timeout controlled by Tx Event FIFO */ +#define FDCAN_TIMEOUT_RX_FIFO0 ((uint32_t)0x00000004U) /*!< Timeout controlled by Rx FIFO 0 */ +#define FDCAN_TIMEOUT_RX_FIFO1 ((uint32_t)0x00000006U) /*!< Timeout controlled by Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup Interrupt_Masks Interrupt masks + * @{ + */ +#define FDCAN_IR_MASK ((uint32_t)0x00FFFFFFU) /*!< FDCAN interrupts mask */ +#define FDCAN_ILS_MASK ((uint32_t)0x0000007FU) /*!< FDCAN interrupts group mask */ +/** + * @} + */ + +/** @defgroup FDCAN_flags FDCAN Flags + * @{ + */ +#define FDCAN_FLAG_TX_COMPLETE FDCAN_IR_TC /*!< Transmission Completed */ +#define FDCAN_FLAG_TX_ABORT_COMPLETE FDCAN_IR_TCF /*!< Transmission Cancellation Finished */ +#define FDCAN_FLAG_TX_FIFO_EMPTY FDCAN_IR_TFE /*!< Tx FIFO Empty */ +#define FDCAN_FLAG_RX_HIGH_PRIORITY_MSG FDCAN_IR_HPM /*!< High priority message received */ +#define FDCAN_FLAG_TX_EVT_FIFO_ELT_LOST FDCAN_IR_TEFL /*!< Tx Event FIFO element lost */ +#define FDCAN_FLAG_TX_EVT_FIFO_FULL FDCAN_IR_TEFF /*!< Tx Event FIFO full */ +#define FDCAN_FLAG_TX_EVT_FIFO_NEW_DATA FDCAN_IR_TEFN /*!< Tx Handler wrote Tx Event FIFO element */ +#define FDCAN_FLAG_RX_FIFO0_MESSAGE_LOST FDCAN_IR_RF0L /*!< Rx FIFO 0 message lost */ +#define FDCAN_FLAG_RX_FIFO0_FULL FDCAN_IR_RF0F /*!< Rx FIFO 0 full */ +#define FDCAN_FLAG_RX_FIFO0_NEW_MESSAGE FDCAN_IR_RF0N /*!< New message written to Rx FIFO 0 */ +#define FDCAN_FLAG_RX_FIFO1_MESSAGE_LOST FDCAN_IR_RF1L /*!< Rx FIFO 1 message lost */ +#define FDCAN_FLAG_RX_FIFO1_FULL FDCAN_IR_RF1F /*!< Rx FIFO 1 full */ +#define FDCAN_FLAG_RX_FIFO1_NEW_MESSAGE FDCAN_IR_RF1N /*!< New message written to Rx FIFO 1 */ +#define FDCAN_FLAG_RAM_ACCESS_FAILURE FDCAN_IR_MRAF /*!< Message RAM access failure occurred */ +#define FDCAN_FLAG_ERROR_LOGGING_OVERFLOW FDCAN_IR_ELO /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_FLAG_ERROR_PASSIVE FDCAN_IR_EP /*!< Error_Passive status changed */ +#define FDCAN_FLAG_ERROR_WARNING FDCAN_IR_EW /*!< Error_Warning status changed */ +#define FDCAN_FLAG_BUS_OFF FDCAN_IR_BO /*!< Bus_Off status changed */ +#define FDCAN_FLAG_RAM_WATCHDOG FDCAN_IR_WDI /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_FLAG_ARB_PROTOCOL_ERROR FDCAN_IR_PEA /*!< Protocol error in arbitration phase detected */ +#define FDCAN_FLAG_DATA_PROTOCOL_ERROR FDCAN_IR_PED /*!< Protocol error in data phase detected */ +#define FDCAN_FLAG_RESERVED_ADDRESS_ACCESS FDCAN_IR_ARA /*!< Access to reserved address occurred */ +#define FDCAN_FLAG_TIMESTAMP_WRAPAROUND FDCAN_IR_TSW /*!< Timestamp counter wrapped around */ +#define FDCAN_FLAG_TIMEOUT_OCCURRED FDCAN_IR_TOO /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts FDCAN Interrupts + * @{ + */ + +/** @defgroup FDCAN_Tx_Interrupts FDCAN Tx Interrupts + * @{ + */ +#define FDCAN_IT_TX_COMPLETE FDCAN_IE_TCE /*!< Transmission Completed */ +#define FDCAN_IT_TX_ABORT_COMPLETE FDCAN_IE_TCFE /*!< Transmission Cancellation Finished */ +#define FDCAN_IT_TX_FIFO_EMPTY FDCAN_IE_TFEE /*!< Tx FIFO Empty */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Interrupts FDCAN Rx Interrupts + * @{ + */ +#define FDCAN_IT_RX_HIGH_PRIORITY_MSG FDCAN_IE_HPME /*!< High priority message received */ +/** + * @} + */ + +/** @defgroup FDCAN_Counter_Interrupts FDCAN Counter Interrupts + * @{ + */ +#define FDCAN_IT_TIMESTAMP_WRAPAROUND FDCAN_IE_TSWE /*!< Timestamp counter wrapped around */ +#define FDCAN_IT_TIMEOUT_OCCURRED FDCAN_IE_TOOE /*!< Timeout reached */ +/** + * @} + */ + +/** @defgroup FDCAN_Tx_Event_Fifo_Interrupts FDCAN Tx Event FIFO Interrupts + * @{ + */ +#define FDCAN_IT_TX_EVT_FIFO_ELT_LOST FDCAN_IE_TEFLE /*!< Tx Event FIFO element lost */ +#define FDCAN_IT_TX_EVT_FIFO_FULL FDCAN_IE_TEFFE /*!< Tx Event FIFO full */ +#define FDCAN_IT_TX_EVT_FIFO_NEW_DATA FDCAN_IE_TEFNE /*!< Tx Handler wrote Tx Event FIFO element */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo0_Interrupts FDCAN Rx FIFO 0 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO0_MESSAGE_LOST FDCAN_IE_RF0LE /*!< Rx FIFO 0 message lost */ +#define FDCAN_IT_RX_FIFO0_FULL FDCAN_IE_RF0FE /*!< Rx FIFO 0 full */ +#define FDCAN_IT_RX_FIFO0_NEW_MESSAGE FDCAN_IE_RF0NE /*!< New message written to Rx FIFO 0 */ +/** + * @} + */ + +/** @defgroup FDCAN_Rx_Fifo1_Interrupts FDCAN Rx FIFO 1 Interrupts + * @{ + */ +#define FDCAN_IT_RX_FIFO1_MESSAGE_LOST FDCAN_IE_RF1LE /*!< Rx FIFO 1 message lost */ +#define FDCAN_IT_RX_FIFO1_FULL FDCAN_IE_RF1FE /*!< Rx FIFO 1 full */ +#define FDCAN_IT_RX_FIFO1_NEW_MESSAGE FDCAN_IE_RF1NE /*!< New message written to Rx FIFO 1 */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Interrupts FDCAN Error Interrupts + * @{ + */ +#define FDCAN_IT_RAM_ACCESS_FAILURE FDCAN_IE_MRAFE /*!< Message RAM access failure occurred */ +#define FDCAN_IT_ERROR_LOGGING_OVERFLOW FDCAN_IE_ELOE /*!< Overflow of FDCAN Error Logging Counter occurred */ +#define FDCAN_IT_RAM_WATCHDOG FDCAN_IE_WDIE /*!< Message RAM Watchdog event due to missing READY */ +#define FDCAN_IT_ARB_PROTOCOL_ERROR FDCAN_IE_PEAE /*!< Protocol error in arbitration phase detected */ +#define FDCAN_IT_DATA_PROTOCOL_ERROR FDCAN_IE_PEDE /*!< Protocol error in data phase detected */ +#define FDCAN_IT_RESERVED_ADDRESS_ACCESS FDCAN_IE_ARAE /*!< Access to reserved address occurred */ +/** + * @} + */ + +/** @defgroup FDCAN_Error_Status_Interrupts FDCAN Error Status Interrupts + * @{ + */ +#define FDCAN_IT_ERROR_PASSIVE FDCAN_IE_EPE /*!< Error_Passive status changed */ +#define FDCAN_IT_ERROR_WARNING FDCAN_IE_EWE /*!< Error_Warning status changed */ +#define FDCAN_IT_BUS_OFF FDCAN_IE_BOE /*!< Bus_Off status changed */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_List FDCAN Interrupts List + * @{ + */ +#define FDCAN_IT_LIST_RX_FIFO0 (FDCAN_IT_RX_FIFO0_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO0_FULL | \ + FDCAN_IT_RX_FIFO0_NEW_MESSAGE) /*!< RX FIFO 0 Interrupts List */ +#define FDCAN_IT_LIST_RX_FIFO1 (FDCAN_IT_RX_FIFO1_MESSAGE_LOST | \ + FDCAN_IT_RX_FIFO1_FULL | \ + FDCAN_IT_RX_FIFO1_NEW_MESSAGE) /*!< RX FIFO 1 Interrupts List */ +#define FDCAN_IT_LIST_SMSG (FDCAN_IT_TX_ABORT_COMPLETE | \ + FDCAN_IT_TX_COMPLETE | \ + FDCAN_IT_RX_HIGH_PRIORITY_MSG) /*!< Status Message Interrupts List */ +#define FDCAN_IT_LIST_TX_FIFO_ERROR (FDCAN_IT_TX_EVT_FIFO_ELT_LOST | \ + FDCAN_IT_TX_EVT_FIFO_FULL | \ + FDCAN_IT_TX_EVT_FIFO_NEW_DATA | \ + FDCAN_IT_TX_FIFO_EMPTY) /*!< TX FIFO Error Interrupts List */ +#define FDCAN_IT_LIST_MISC (FDCAN_IT_TIMEOUT_OCCURRED | \ + FDCAN_IT_RAM_ACCESS_FAILURE | \ + FDCAN_IT_TIMESTAMP_WRAPAROUND) /*!< Misc. Interrupts List */ +#define FDCAN_IT_LIST_BIT_LINE_ERROR (FDCAN_IT_ERROR_PASSIVE | \ + FDCAN_IT_ERROR_LOGGING_OVERFLOW) /*!< Bit and Line Error Interrupts List */ +#define FDCAN_IT_LIST_PROTOCOL_ERROR (FDCAN_IT_RESERVED_ADDRESS_ACCESS | \ + FDCAN_IT_DATA_PROTOCOL_ERROR | \ + FDCAN_IT_ARB_PROTOCOL_ERROR | \ + FDCAN_IT_RAM_WATCHDOG | \ + FDCAN_IT_BUS_OFF | \ + FDCAN_IT_ERROR_WARNING) /*!< Protocol Error Interrupts List */ +/** + * @} + */ + +/** @defgroup FDCAN_Interrupts_Group FDCAN Interrupts Group + * @{ + */ +#define FDCAN_IT_GROUP_RX_FIFO0 FDCAN_ILS_RXFIFO0 /*!< RX FIFO 0 Interrupts Group: + RF0LL: Rx FIFO 0 Message Lost + RF0FL: Rx FIFO 0 is Full + RF0NL: Rx FIFO 0 Has New Message */ +#define FDCAN_IT_GROUP_RX_FIFO1 FDCAN_ILS_RXFIFO1 /*!< RX FIFO 1 Interrupts Group: + RF1LL: Rx FIFO 1 Message Lost + RF1FL: Rx FIFO 1 is Full + RF1NL: Rx FIFO 1 Has New Message */ +#define FDCAN_IT_GROUP_SMSG FDCAN_ILS_SMSG /*!< Status Message Interrupts Group: + TCFL: Transmission Cancellation Finished + TCL: Transmission Completed + HPML: High Priority Message */ +#define FDCAN_IT_GROUP_TX_FIFO_ERROR FDCAN_ILS_TFERR /*!< TX FIFO Error Interrupts Group: + TEFLL: Tx Event FIFO Element Lost + TEFFL: Tx Event FIFO Full + TEFNL: Tx Event FIFO New Entry + TFEL: Tx FIFO Empty Interrupt Line */ +#define FDCAN_IT_GROUP_MISC FDCAN_ILS_MISC /*!< Misc. Interrupts Group: + TOOL: Timeout Occurred + MRAFL: Message RAM Access Failure + TSWL: Timestamp Wraparound */ +#define FDCAN_IT_GROUP_BIT_LINE_ERROR FDCAN_ILS_BERR /*!< Bit and Line Error Interrupts Group: + EPL: Error Passive + ELOL: Error Logging Overflow */ +#define FDCAN_IT_GROUP_PROTOCOL_ERROR FDCAN_ILS_PERR /*!< Protocol Error Group: + ARAL: Access to Reserved Address Line + PEDL: Protocol Error in Data Phase Line + PEAL: Protocol Error in Arbitration Phase Line + WDIL: Watchdog Interrupt Line + BOL: Bus_Off Status + EWL: Warning Status */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Macros FDCAN Exported Macros + * @{ + */ + +/** @brief Reset FDCAN handle state. + * @param __HANDLE__ FDCAN handle. + * @retval None + */ +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_FDCAN_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_FDCAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FDCAN_STATE_RESET) +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @brief Enable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (__HANDLE__)->Instance->IE |= (__INTERRUPT__) + +/** + * @brief Disable the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IE) &= ~(__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN interrupt is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ FDCAN interrupt. + * This parameter can be one of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IR & (__INTERRUPT__)) + +/** + * @brief Clear the specified FDCAN interrupts. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the interrupts to clear. + * This parameter can be any combination of @arg FDCAN_Interrupts + * @retval None + */ +#define __HAL_FDCAN_CLEAR_IT(__HANDLE__, __INTERRUPT__) \ + ((__HANDLE__)->Instance->IR) = (__INTERRUPT__) + +/** + * @brief Check whether the specified FDCAN flag is set or not. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ FDCAN flag. + * This parameter can be one of @arg FDCAN_flags + * @retval FlagStatus + */ +#define __HAL_FDCAN_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IR & (__FLAG__)) + +/** + * @brief Clear the specified FDCAN flags. + * @param __HANDLE__ FDCAN handle. + * @param __FLAG__ specifies the flags to clear. + * This parameter can be any combination of @arg FDCAN_flags + * @retval None + */ +#define __HAL_FDCAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((__HANDLE__)->Instance->IR) = (__FLAG__) + +/** @brief Check if the specified FDCAN interrupt source is enabled or disabled. + * @param __HANDLE__ FDCAN handle. + * @param __INTERRUPT__ specifies the FDCAN interrupt source to check. + * This parameter can be a value of @arg FDCAN_Interrupts + * @retval ITStatus + */ +#define __HAL_FDCAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IE & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FDCAN_Exported_Functions + * @{ + */ + +/** @addtogroup FDCAN_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, + pFDCAN_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxEventFifoCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_RxFifo0CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_RxFifo1CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxBufferCompleteCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxBufferAbortCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_ErrorStatusCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group2 + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, const FDCAN_FilterTypeDef *sFilterConfig); +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, uint32_t NonMatchingStd, + uint32_t NonMatchingExt, uint32_t RejectRemoteStd, + uint32_t RejectRemoteExt); +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask); +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode); +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler); +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation); +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimestampCounter(const FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, + uint32_t TimeoutPeriod); +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +uint16_t HAL_FDCAN_GetTimeoutCounter(const FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, + uint32_t TdcFilter); +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group3 + * @{ + */ +/* Control functions **********************************************************/ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, const FDCAN_TxHeaderTypeDef *pTxHeader, + const uint8_t *pTxData); +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(const FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex); +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, + FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData); +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent); +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_HpMsgStatusTypeDef *HpMsgStatus); +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_ProtocolStatusTypeDef *ProtocolStatus); +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_ErrorCountersTypeDef *ErrorCounters); +uint32_t HAL_FDCAN_IsTxBufferMessagePending(const FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex); +uint32_t HAL_FDCAN_GetRxFifoFillLevel(const FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo); +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(const FDCAN_HandleTypeDef *hfdcan); +uint32_t HAL_FDCAN_IsRestrictedOperationMode(const FDCAN_HandleTypeDef *hfdcan); +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group4 + * @{ + */ +/* Interrupts management ******************************************************/ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine); +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, + uint32_t BufferIndexes); +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs); +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group5 + * @{ + */ +/* Callback functions *********************************************************/ +void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs); +void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs); +void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs); +void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes); +void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan); +void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs); +/** + * @} + */ + +/** @addtogroup FDCAN_Exported_Functions_Group6 + * @{ + */ +/* Peripheral State functions *************************************************/ +uint32_t HAL_FDCAN_GetError(const FDCAN_HandleTypeDef *hfdcan); +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(const FDCAN_HandleTypeDef *hfdcan); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Variables FDCAN Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Constants FDCAN Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FDCAN_Private_Macros FDCAN Private Macros + * @{ + */ +#define IS_FDCAN_FRAME_FORMAT(FORMAT) (((FORMAT) == FDCAN_FRAME_CLASSIC ) || \ + ((FORMAT) == FDCAN_FRAME_FD_NO_BRS) || \ + ((FORMAT) == FDCAN_FRAME_FD_BRS )) +#define IS_FDCAN_MODE(MODE) (((MODE) == FDCAN_MODE_NORMAL ) || \ + ((MODE) == FDCAN_MODE_RESTRICTED_OPERATION) || \ + ((MODE) == FDCAN_MODE_BUS_MONITORING ) || \ + ((MODE) == FDCAN_MODE_INTERNAL_LOOPBACK ) || \ + ((MODE) == FDCAN_MODE_EXTERNAL_LOOPBACK )) +#define IS_FDCAN_CKDIV(CKDIV) (((CKDIV) == FDCAN_CLOCK_DIV1 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV2 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV4 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV6 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV8 ) || \ + ((CKDIV) == FDCAN_CLOCK_DIV10) || \ + ((CKDIV) == FDCAN_CLOCK_DIV12) || \ + ((CKDIV) == FDCAN_CLOCK_DIV14) || \ + ((CKDIV) == FDCAN_CLOCK_DIV16) || \ + ((CKDIV) == FDCAN_CLOCK_DIV18) || \ + ((CKDIV) == FDCAN_CLOCK_DIV20) || \ + ((CKDIV) == FDCAN_CLOCK_DIV22) || \ + ((CKDIV) == FDCAN_CLOCK_DIV24) || \ + ((CKDIV) == FDCAN_CLOCK_DIV26) || \ + ((CKDIV) == FDCAN_CLOCK_DIV28) || \ + ((CKDIV) == FDCAN_CLOCK_DIV30)) +#define IS_FDCAN_NOMINAL_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 512U)) +#define IS_FDCAN_NOMINAL_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 128U)) +#define IS_FDCAN_NOMINAL_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 256U)) +#define IS_FDCAN_NOMINAL_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 128U)) +#define IS_FDCAN_DATA_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 32U)) +#define IS_FDCAN_DATA_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 16U)) +#define IS_FDCAN_DATA_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 32U)) +#define IS_FDCAN_DATA_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 16U)) +#define IS_FDCAN_MAX_VALUE(VALUE, _MAX_) ((VALUE) <= (_MAX_)) +#define IS_FDCAN_MIN_VALUE(VALUE, _MIN_) ((VALUE) >= (_MIN_)) +#define IS_FDCAN_TX_FIFO_QUEUE_MODE(MODE) (((MODE) == FDCAN_TX_FIFO_OPERATION ) || \ + ((MODE) == FDCAN_TX_QUEUE_OPERATION)) +#define IS_FDCAN_ID_TYPE(ID_TYPE) (((ID_TYPE) == FDCAN_STANDARD_ID) || \ + ((ID_TYPE) == FDCAN_EXTENDED_ID)) +#define IS_FDCAN_FILTER_CFG(CONFIG) (((CONFIG) == FDCAN_FILTER_DISABLE ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0 ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1 ) || \ + ((CONFIG) == FDCAN_FILTER_REJECT ) || \ + ((CONFIG) == FDCAN_FILTER_HP ) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO0_HP) || \ + ((CONFIG) == FDCAN_FILTER_TO_RXFIFO1_HP)) +#define IS_FDCAN_TX_LOCATION(LOCATION) (((LOCATION) == FDCAN_TX_BUFFER0 ) || ((LOCATION) == FDCAN_TX_BUFFER1 ) || \ + ((LOCATION) == FDCAN_TX_BUFFER2 )) +#define IS_FDCAN_TX_LOCATION_LIST(LOCATION) (((LOCATION) >= FDCAN_TX_BUFFER0) && \ + ((LOCATION) <= (FDCAN_TX_BUFFER0 | FDCAN_TX_BUFFER1 | FDCAN_TX_BUFFER2))) +#define IS_FDCAN_RX_FIFO(FIFO) (((FIFO) == FDCAN_RX_FIFO0) || \ + ((FIFO) == FDCAN_RX_FIFO1)) +#define IS_FDCAN_RX_FIFO_MODE(MODE) (((MODE) == FDCAN_RX_FIFO_BLOCKING ) || \ + ((MODE) == FDCAN_RX_FIFO_OVERWRITE)) +#define IS_FDCAN_STD_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK )) +#define IS_FDCAN_EXT_FILTER_TYPE(TYPE) (((TYPE) == FDCAN_FILTER_RANGE ) || \ + ((TYPE) == FDCAN_FILTER_DUAL ) || \ + ((TYPE) == FDCAN_FILTER_MASK ) || \ + ((TYPE) == FDCAN_FILTER_RANGE_NO_EIDM)) +#define IS_FDCAN_FRAME_TYPE(TYPE) (((TYPE) == FDCAN_DATA_FRAME ) || \ + ((TYPE) == FDCAN_REMOTE_FRAME)) +#define IS_FDCAN_DLC(DLC) (((DLC) == FDCAN_DLC_BYTES_0 ) || \ + ((DLC) == FDCAN_DLC_BYTES_1 ) || \ + ((DLC) == FDCAN_DLC_BYTES_2 ) || \ + ((DLC) == FDCAN_DLC_BYTES_3 ) || \ + ((DLC) == FDCAN_DLC_BYTES_4 ) || \ + ((DLC) == FDCAN_DLC_BYTES_5 ) || \ + ((DLC) == FDCAN_DLC_BYTES_6 ) || \ + ((DLC) == FDCAN_DLC_BYTES_7 ) || \ + ((DLC) == FDCAN_DLC_BYTES_8 ) || \ + ((DLC) == FDCAN_DLC_BYTES_12) || \ + ((DLC) == FDCAN_DLC_BYTES_16) || \ + ((DLC) == FDCAN_DLC_BYTES_20) || \ + ((DLC) == FDCAN_DLC_BYTES_24) || \ + ((DLC) == FDCAN_DLC_BYTES_32) || \ + ((DLC) == FDCAN_DLC_BYTES_48) || \ + ((DLC) == FDCAN_DLC_BYTES_64)) +#define IS_FDCAN_ESI(ESI) (((ESI) == FDCAN_ESI_ACTIVE ) || \ + ((ESI) == FDCAN_ESI_PASSIVE)) +#define IS_FDCAN_BRS(BRS) (((BRS) == FDCAN_BRS_OFF) || \ + ((BRS) == FDCAN_BRS_ON )) +#define IS_FDCAN_FDF(FDF) (((FDF) == FDCAN_CLASSIC_CAN) || \ + ((FDF) == FDCAN_FD_CAN )) +#define IS_FDCAN_EFC(EFC) (((EFC) == FDCAN_NO_TX_EVENTS ) || \ + ((EFC) == FDCAN_STORE_TX_EVENTS)) +#define IS_FDCAN_IT(IT) (((IT) & ~(FDCAN_IR_MASK)) == 0U) +#define IS_FDCAN_IT_GROUP(IT_GROUP) (((IT_GROUP) & ~(FDCAN_ILS_MASK)) == 0U) +#define IS_FDCAN_NON_MATCHING(DESTINATION) (((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO0) || \ + ((DESTINATION) == FDCAN_ACCEPT_IN_RX_FIFO1) || \ + ((DESTINATION) == FDCAN_REJECT )) +#define IS_FDCAN_REJECT_REMOTE(DESTINATION) (((DESTINATION) == FDCAN_FILTER_REMOTE) || \ + ((DESTINATION) == FDCAN_REJECT_REMOTE)) +#define IS_FDCAN_IT_LINE(IT_LINE) (((IT_LINE) == FDCAN_INTERRUPT_LINE0) || \ + ((IT_LINE) == FDCAN_INTERRUPT_LINE1)) +#define IS_FDCAN_TIMESTAMP(OPERATION) (((OPERATION) == FDCAN_TIMESTAMP_INTERNAL) || \ + ((OPERATION) == FDCAN_TIMESTAMP_EXTERNAL)) +#define IS_FDCAN_TIMESTAMP_PRESCALER(PRESCALER) (((PRESCALER) == FDCAN_TIMESTAMP_PRESC_1 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_2 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_3 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_4 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_5 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_6 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_7 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_8 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_9 ) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_10) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_11) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_12) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_13) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_14) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_15) || \ + ((PRESCALER) == FDCAN_TIMESTAMP_PRESC_16)) +#define IS_FDCAN_TIMEOUT(OPERATION) (((OPERATION) == FDCAN_TIMEOUT_CONTINUOUS ) || \ + ((OPERATION) == FDCAN_TIMEOUT_TX_EVENT_FIFO) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO0 ) || \ + ((OPERATION) == FDCAN_TIMEOUT_RX_FIFO1 )) + +#define FDCAN_CHECK_IT_SOURCE(__IE__, __IT__) ((((__IE__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define FDCAN_CHECK_FLAG(__IR__, __FLAG__) ((((__IR__) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ +#endif /* FDCAN1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_FDCAN_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash.h new file mode 100644 index 000000000..a14c1821a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash.h @@ -0,0 +1,831 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_FLASH_H +#define STM32H7RSxx_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Sector; /*!< Initial Flash sector to erase when sector erase is enabled + This parameter must be a value between 0 and (max number of sector - 1) + (eg : 15 for 128KB single bank) */ + uint32_t NbSectors; /*!< Number of sectors to be erased. + This parameter must be a value between 1 and + (max number of sectors - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +#define FLASH_KEY_DATA_NB_REG (8U) /*!< 8 Key data registers */ + +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_TYPE */ + uint32_t WRPState; /*!< Write protection activation or deactivation (used for OPTIONBYTE_WRP). + This parameter can be value of @ref FLASH_OB_WRP_STATE */ + uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected (used for OPTIONBYTE_WRP). + The value of this parameter depend on device used within the same series */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_TYPE */ + uint32_t USERConfig1; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEV, + @ref FLASH_OB_USER_IWDG_SW, @ref FLASH_OB_USER_nRST_STOP, + @ref FLASH_OB_USER_nRST_STDBY, @ref FLASH_OB_USER_XSPI1_HSLV, + @ref FLASH_OB_USER_XSPI2_HSLV, @ref FLASH_OB_USER_IWDG_STOP, + @ref FLASH_OB_USER_IWDG_STANDBY, @ref FLASH_OB_USER_VDDIO_HSLV */ + uint32_t USERConfig2; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_ITCM_AXI_SHARE, + @ref FLASH_OB_USER_DTCM_AXI_SHARE, @ref FLASH_OB_USER_ECC_ON_SRAM, + @ref FLASH_OB_USER_I2C_NI3C */ + uint32_t HDPStartPage; /*!< Start address that contains the first 256-byte block of HDP area (used for OPTIONBYTE_HDP). + This parameter must be a value between 0 or 0xFFF */ + uint32_t HDPEndPage; /*!< End address that contains the last 256-byte block of HDP area (used for OPTIONBYTE_HDP). + This parameter must be a value between 0 or 0xFFF */ + uint32_t NVState; /*!< Value of the non-volatile state (used for OPTIONBYTE_NV). + This parameter must be a value of @ref FLASH_OB_NVSTATE */ + uint32_t ROTConfig; /*!< Value of the RoT status (only used for read configuration). + This parameter can be a combination of @ref FLASH_OB_ROT_OEM_PROVD, + @ref FLASH_OB_ROT_DBG_AUTH, @ref FLASH_OB_ROT_IROT_SELECT */ + uint32_t EPOCH; /*!< Value of the epoch (only used for read configuration). + This parameter must be a value between 0x0 and 0xFFFFFF */ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + uint32_t ErrorCode; /* FLASH error code */ + uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT + context */ + uint32_t Address; /* Internal variable to save address selected for program in IT context */ + uint32_t Sector; /* Internal variable to define the current sector which is being erased in + IT context */ + uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Flags FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_EOP FLASH_ISR_EOPF /*!< FLASH End of program flag */ +#define FLASH_FLAG_WRPERR FLASH_ISR_WRPERRF /*!< FLASH Write protection error flag */ +#define FLASH_FLAG_PGSERR FLASH_ISR_PGSERRF /*!< FLASH Programming sequence error flag */ +#define FLASH_FLAG_STRBERR FLASH_ISR_STRBERRF /*!< FLASH Strobe error flag */ +#define FLASH_FLAG_OBLERR FLASH_ISR_OBLERRF /*!< FLASH Option byte loading error flag */ +#define FLASH_FLAG_INCERR FLASH_ISR_INCERRF /*!< FLASH Inconsistency error flag */ +#define FLASH_FLAG_RDSERR FLASH_ISR_RDSERRF /*!< FLASH Read security error flag */ +#define FLASH_FLAG_SNECCERR FLASH_ISR_SNECCERRF /*!< FLASH ECC single error flag */ +#define FLASH_FLAG_DBECCERR FLASH_ISR_DBECCERRF /*!< FLASH ECC double error flag */ +#define FLASH_FLAG_CRCEND FLASH_ISR_CRCENDF /*!< FLASH CRC end of calculation flag */ +#define FLASH_FLAG_CRCERR FLASH_ISR_CRCRDERRF /*!< FLASH CRC error flag */ +#define FLASH_FLAG_KVERR FLASH_OPTISR_KVEF /*!< FLASH Key valid error flag */ +#define FLASH_FLAG_KTERR FLASH_OPTISR_KTEF /*!< FLASH Key transfer error flag */ +#define FLASH_FLAG_OPTERR FLASH_OPTISR_OPTERRF /*!< FLASH Options byte change error flag */ + +#define FLASH_FLAG_ISR_ERRORS (FLASH_FLAG_WRPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_STRBERR | \ + FLASH_FLAG_OBLERR | FLASH_FLAG_INCERR | FLASH_FLAG_RDSERR | \ + FLASH_FLAG_CRCERR) +#define FLASH_FLAG_ECC_ERRORS (FLASH_FLAG_SNECCERR | FLASH_FLAG_DBECCERR) +#define FLASH_FLAG_OPTISR_ERRORS (FLASH_FLAG_KVERR | FLASH_FLAG_KTERR | FLASH_FLAG_OPTERR) +#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_ISR_ERRORS | FLASH_FLAG_ECC_ERRORS | FLASH_FLAG_OPTISR_ERRORS) + +#define FLASH_FLAG_ISR_FLAGS (FLASH_FLAG_ISR_ERRORS | FLASH_FLAG_ECC_ERRORS | FLASH_FLAG_EOP) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP FLASH_IER_EOPIE /*!< End of program interrupt source */ +#define FLASH_IT_WRPERR FLASH_IER_WRPERRIE /*!< FLASH Write protection error interrupt source */ +#define FLASH_IT_PGSERR FLASH_IER_PGSERRIE /*!< FLASH Programming sequence error interrupt source */ +#define FLASH_IT_STRBERR FLASH_IER_STRBERRIE /*!< FLASH Strobe error interrupt source */ +#define FLASH_IT_OBLERR FLASH_IER_OBLERRIE /*!< FLASH Option byte loading error interrupt source */ +#define FLASH_IT_INCERR FLASH_IER_INCERRIE /*!< FLASH Inconsistency error interrupt source */ +#define FLASH_IT_RDSERR FLASH_IER_RDSERRIE /*!< FLASH Read security error interrupt source */ +#define FLASH_IT_SNECCERR FLASH_IER_SNECCERRIE /*!< FLASH ECC single error interrupt source */ +#define FLASH_IT_DBECCERR FLASH_IER_DBECCERRIE /*!< FLASH ECC double error interrupt source */ +#define FLASH_IT_CRCEND FLASH_IER_CRCENDIE /*!< FLASH CRC end of calculation interrupt source */ +#define FLASH_IT_CRCERR FLASH_IER_CRCRDERRIE /*!< FLASH CRC error interrupt source */ +#define FLASH_IT_KVERR FLASH_OPTCR_KVEIE /*!< FLASH Key valid error interrupt source */ +#define FLASH_IT_KTERR FLASH_OPTCR_KTEIE /*!< FLASH Key transfer error interrupt source */ +#define FLASH_IT_OPTERR FLASH_OPTCR_OPTERRIE /*!< FLASH Options byte change error interrupt source */ + +#define FLASH_IT_IER (FLASH_IT_EOP | FLASH_IT_WRPERR | FLASH_IT_PGSERR | FLASH_IT_STRBERR | \ + FLASH_IT_OBLERR | FLASH_IT_INCERR | FLASH_IT_RDSERR | FLASH_IT_SNECCERR | \ + FLASH_IT_DBECCERR | FLASH_IT_CRCEND | FLASH_IT_CRCERR) +#define FLASH_IT_OPTCR (FLASH_IT_KVERR | FLASH_IT_KTERR | FLASH_IT_OPTERR) +/** + * @} + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR +#define HAL_FLASH_ERROR_STRB FLASH_FLAG_STRBERR +#define HAL_FLASH_ERROR_OBL FLASH_FLAG_OBLERR +#define HAL_FLASH_ERROR_INC FLASH_FLAG_INCERR +#define HAL_FLASH_ERROR_RDS FLASH_FLAG_RDSERR +#define HAL_FLASH_ERROR_SNECC FLASH_FLAG_SNECCERR +#define HAL_FLASH_ERROR_DBECC FLASH_FLAG_DBECCERR +#define HAL_FLASH_ERROR_CRC FLASH_FLAG_CRCERR +#define HAL_FLASH_ERROR_KV FLASH_FLAG_KVERR +#define HAL_FLASH_ERROR_KT FLASH_FLAG_KTERR +#define HAL_FLASH_ERROR_OPT FLASH_FLAG_OPTERR +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_SECTORS FLASH_CR_SER /*!< Sectors erase activation */ +#define FLASH_TYPEERASE_MASSERASE FLASH_CR_BER /*!< Flash mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_BYTE (FLASH_CR_PG | FLASH_CR_FW) /*!< Program a byte (8-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_HALFWORD (FLASH_HALFWORD_MASK | FLASH_CR_PG | FLASH_CR_FW) /*!< Program a half-word (16-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_WORD (FLASH_WORD_MASK | FLASH_CR_PG | FLASH_CR_FW) /*!< Program a word (32-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD (FLASH_DOUBLEWORD_MASK | FLASH_CR_PG | FLASH_CR_FW) /*!< Program a double-word (64-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_QUADWORD (FLASH_CR_PG) /*!< Program a quad-word (128-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_OTP_HALFWORD (FLASH_HALFWORD_MASK | FLASH_CR_PG_OTP | FLASH_CR_FW) /*!< Program a half-word (16-bit) at a OTP address */ +#define FLASH_TYPEPROGRAM_OTP_WORD (FLASH_WORD_MASK | FLASH_CR_PG_OTP | FLASH_CR_FW) /*!< Program a word (32-bit) at a OTP address */ +/** + * @} + */ + +/** @defgroup FLASH_OB_TYPE FLASH Option Bytes Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_USER 0x00000002U /*!< User option byte configuration */ +#define OPTIONBYTE_HDP 0x00000004U /*!< HDP option byte configuration */ +#define OPTIONBYTE_NV 0x00000008U /*!< Non-Volatile State option byte configuration */ +/** + * @} + */ + +/** @defgroup FLASH_OB_WRP_STATE FLASH Option Bytes WRP State + * @{ + */ +#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired sectors */ +#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired sectors */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_TYPE FLASH Option Bytes User Type + * @{ + */ +#define OB_USER_BOR_LEV 0x00000001U /*!< Brownout level */ +#define OB_USER_IWDG_SW 0x00000002U /*!< IWDG control mode */ +#define OB_USER_NRST_STOP 0x00000004U /*!< Stop entry reset */ +#define OB_USER_NRST_STDBY 0x00000008U /*!< Standby entry reset */ +#define OB_USER_XSPI1_HSLV 0x00000010U /*!< XSPI1 High-speed at low voltage */ +#define OB_USER_XSPI2_HSLV 0x00000020U /*!< XSPI2 High-speed at low voltage */ +#define OB_USER_IWDG_STOP 0x00000040U /*!< IWDG Stop mode freeze */ +#define OB_USER_IWDG_STDBY 0x00000080U /*!< IWDG Standby mode freeze */ +#define OB_USER_VDDIO_HSLV 0x00000100U /*!< I/O High-speed at low voltage */ +#define OB_USER_ITCM_AXI_SHARE 0x00000200U /*!< ITCM AXI share */ +#define OB_USER_DTCM_AXI_SHARE 0x00000400U /*!< DTCM AXI share */ +#define OB_USER_SRAM_ECC 0x00000800U /*!< ECC on SRAM */ +#define OB_USER_I2C_NI3C 0x00001000U /*!< I2C Not I3C */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_LEV FLASH Option Bytes User BOR Level + * @{ + */ +#define OB_BOR_LEVEL_0 0x00000000U /*!< BOR OFF, POR/PDR reset threshold level is applied */ +#define OB_BOR_LEVEL_1 FLASH_OBW1SRP_BOR_LEVEL_0 /*!< BOR Level 1, the threshold level is low (around 2.1 V) */ +#define OB_BOR_LEVEL_2 FLASH_OBW1SRP_BOR_LEVEL_1 /*!< BOR Level 2, the threshold level is medium (around 2.4 V) */ +#define OB_BOR_LEVEL_3 FLASH_OBW1SRP_BOR_LEVEL /*!< BOR Level 3, the threshold level is high (around 2.7 V) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG control mode + * @{ + */ +#define OB_IWDG_HW 0x00000000U /*!< IWDG watchdog is controlled by hardware */ +#define OB_IWDG_SW FLASH_OBW1SRP_IWDG_HW /*!< IWDG watchdog is controlled by software */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User stop entry reset + * @{ + */ +#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering stop mode */ +#define OB_STOP_NORST FLASH_OBW1SRP_NRST_STOP /*!< No reset generated when entering stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STDBY FLASH Option Bytes User standby entry reset + * @{ + */ +#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering standby mode */ +#define OB_STANDBY_NORST FLASH_OBW1SRP_NRST_STBY /*!< No reset generated when entering standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_XSPI1_HSLV FLASH Option Bytes User XSPI 1 High-Speed at Low-Voltage + * @{ + */ +#define OB_XSPI1_HSLV_DISABLE 0x00000000U /*!< I/O speed optimization at low-voltage disabled */ +#define OB_XSPI1_HSLV_ENABLE FLASH_OBW1SRP_XSPI1_HSLV /*!< I/O speed optimization at low-voltage feature allowed */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_XSPI2_HSLV FLASH Option Bytes User XSPI 2 High-Speed at Low-Voltage + * @{ + */ +#define OB_XSPI2_HSLV_DISABLE 0x00000000U /*!< I/O speed optimization at low-voltage disabled */ +#define OB_XSPI2_HSLV_ENABLE FLASH_OBW1SRP_XSPI2_HSLV /*!< I/O speed optimization at low-voltage feature allowed */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Stop Mode Freeze + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog frozen in Stop mode */ +#define OB_IWDG_STOP_RUN FLASH_OBW1SRP_IWDG_FZ_STOP /*!< Independent watchdog running in Stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Standby Mode Freeze + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog frozen in Standby mode */ +#define OB_IWDG_STDBY_RUN FLASH_OBW1SRP_IWDG_FZ_STBY /*!< Independent watchdog running in Standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_VDDIO_HSLV FLASH Option Bytes User I/O High-Speed at Low-Voltage + * @{ + */ +#define OB_VDDIO_HSLV_DISABLE 0x00000000U /*!< I/O speed optimization at low-voltage disabled */ +#define OB_VDDIO_HSLV_ENABLE FLASH_OBW1SRP_VDDIO_HSLV /*!< I/O speed optimization at low-voltage feature allowed */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_ITCM_AXI_SHARE FLASH Option Bytes User ITCM AXI share + * @{ + */ +#define OB_ITCM_AXI_SHARE_0 0x00000000U +#define OB_ITCM_AXI_SHARE_1 FLASH_OBW2SRP_ITCM_AXI_SHARE_0 +#define OB_ITCM_AXI_SHARE_2 FLASH_OBW2SRP_ITCM_AXI_SHARE_1 +#define OB_ITCM_AXI_SHARE_3 (FLASH_OBW2SRP_ITCM_AXI_SHARE_0 | FLASH_OBW2SRP_ITCM_AXI_SHARE_1) +#define OB_ITCM_AXI_SHARE_4 FLASH_OBW2SRP_ITCM_AXI_SHARE_2 +#define OB_ITCM_AXI_SHARE_5 (FLASH_OBW2SRP_ITCM_AXI_SHARE_2 | FLASH_OBW2SRP_ITCM_AXI_SHARE_0) +#define OB_ITCM_AXI_SHARE_6 (FLASH_OBW2SRP_ITCM_AXI_SHARE_2 | FLASH_OBW2SRP_ITCM_AXI_SHARE_1) +#define OB_ITCM_AXI_SHARE_7 FLASH_OBW2SRP_ITCM_AXI_SHARE +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_DTCM_AXI_SHARE FLASH Option Bytes User DTCM AXI share + * @{ + */ +#define OB_DTCM_AXI_SHARE_0 0x00000000U +#define OB_DTCM_AXI_SHARE_1 FLASH_OBW2SRP_DTCM_AXI_SHARE_0 +#define OB_DTCM_AXI_SHARE_2 FLASH_OBW2SRP_DTCM_AXI_SHARE_1 +#define OB_DTCM_AXI_SHARE_3 (FLASH_OBW2SRP_DTCM_AXI_SHARE_0 | FLASH_OBW2SRP_DTCM_AXI_SHARE_1) +#define OB_DTCM_AXI_SHARE_4 FLASH_OBW2SRP_DTCM_AXI_SHARE_2 +#define OB_DTCM_AXI_SHARE_5 (FLASH_OBW2SRP_DTCM_AXI_SHARE_2 | FLASH_OBW2SRP_DTCM_AXI_SHARE_0) +#define OB_DTCM_AXI_SHARE_6 (FLASH_OBW2SRP_DTCM_AXI_SHARE_2 | FLASH_OBW2SRP_DTCM_AXI_SHARE_1) +#define OB_DTCM_AXI_SHARE_7 FLASH_OBW2SRP_DTCM_AXI_SHARE +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_ECC_ON_SRAM FLASH Option Bytes User ECC on sRAM + * @{ + */ +#define OB_AXISRAM_ECC_DISABLE 0x00000000U /*!< AXISRAM ECC check disable */ +#define OB_AXISRAM_ECC_ENABLE FLASH_OBW2SRP_ECC_ON_SRAM /*!< AXISRAM ECC check enable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_I2C_NI3C FLASH Option Bytes User I2C Not I3C + * @{ + */ +#define OB_I2C_NI3C_I2C FLASH_OBW2SRP_I2C_NI3C +#define OB_I2C_NI3C_I3C 0x00000000U +/** + * @} + */ + +/** @defgroup FLASH_OB_NVSTATE FLASH Option Bytes Non-volatile state + * @{ + */ +#define OB_NVSTATE_OPEN (uint8_t)0xB4 +#define OB_NVSTATE_CLOSE (uint8_t)0x51 +/** + * @} + */ + +/** @defgroup FLASH_OB_ROT_OEM_PROVD FLASH Option Bytes Root-Of-Trust OEM Provisioned state + * @{ + */ +#define OB_OEM_PROVD_ENABLE (0xB4UL << FLASH_ROTSR_OEM_PROVD_Pos) /*!< Device is in OEM provisioned state */ +#define OB_OEM_PROVD_DEFAULT (0x6AUL << FLASH_ROTSR_OEM_PROVD_Pos) /*!< Device is not in OEM provisioned state (default value)*/ +/** + * @} + */ + +/** @defgroup FLASH_OB_ROT_DBG_AUTH FLASH Option Bytes Root-Of-Trust Debug authentication method + * @{ + */ +#define OB_DBG_AUTH_LOCKED (0xB4UL << FLASH_ROTSR_DBG_AUTH_Pos) /*!< Locked device (no debug allowed) */ +#define OB_DBG_AUTH_ECDSA_SIGN (0x51UL << FLASH_ROTSR_DBG_AUTH_Pos) /*!< Authentication method using ECDSA signature (NISTP256) */ +#define OB_DBG_AUTH_PASSWORD (0x8AUL << FLASH_ROTSR_DBG_AUTH_Pos) /*!< Authentication method using password */ +#define OB_DBG_AUTH_DEFAULT (0xFFUL << FLASH_ROTSR_DBG_AUTH_Pos) /*!< No authentication method selected (default value) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_ROT_IROT_SELECT FLASH Option Bytes iRoT selection + * @{ + */ +#define OB_IROT_SELECTION_ST (0xB4UL << FLASH_ROTSR_IROT_SELECT_Pos) /*!< ST iRoT is selected at boot */ +#define OB_IROT_SELECTION_OEM (0x6AUL << FLASH_ROTSR_IROT_SELECT_Pos) /*!< OEM iRoT is selected at boot */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 0U /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ +#define FLASH_LATENCY_2 (FLASH_ACR_LATENCY_1 | FLASH_ACR_WRHIGHFREQ_0) /*!< FLASH Two wait states */ +#define FLASH_LATENCY_3 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ_0) /*!< FLASH Three wait states */ +#define FLASH_LATENCY_4 (FLASH_ACR_LATENCY_2 | FLASH_ACR_WRHIGHFREQ_1) /*!< FLASH Four wait states */ +#define FLASH_LATENCY_5 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ_1) /*!< FLASH Five wait states */ +#define FLASH_LATENCY_6 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Six wait state */ +#define FLASH_LATENCY_7 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Seven wait states */ +#define FLASH_LATENCY_8 (FLASH_ACR_LATENCY_3 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Eight wait states */ +#define FLASH_LATENCY_9 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Nine wait states */ +#define FLASH_LATENCY_10 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_1 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Ten wait states */ +#define FLASH_LATENCY_11 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Eleven wait states */ +#define FLASH_LATENCY_12 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Twelve wait states */ +#define FLASH_LATENCY_13 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_0 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Thirteen wait states */ +#define FLASH_LATENCY_14 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1 | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Fourteen wait states */ +#define FLASH_LATENCY_15 (FLASH_ACR_LATENCY | FLASH_ACR_WRHIGHFREQ) /*!< FLASH Fifteen wait states */ +/** + * @} + */ + +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U /*!< Flash key1 */ +#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1 + to unlock the FLASH registers access */ + +#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */ +#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1 + to allow option bytes operations */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + * @arg FLASH_LATENCY_5: FLASH Five wait states + * @arg FLASH_LATENCY_6: FLASH Six wait states + * @arg FLASH_LATENCY_7: FLASH Seven wait states + * @arg FLASH_LATENCY_8: FLASH Eight wait states + * @arg FLASH_LATENCY_9: FLASH Nine wait states + * @arg FLASH_LATENCY_10: FLASH Ten wait states + * @arg FLASH_LATENCY_11: FLASH Eleven wait states + * @arg FLASH_LATENCY_12: FLASH Twelve wait states + * @arg FLASH_LATENCY_13: FLASH Thirteen wait states + * @arg FLASH_LATENCY_14: FLASH Fourteen wait states + * @arg FLASH_LATENCY_15: FLASH Fifteen wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, (FLASH_ACR_LATENCY |\ + FLASH_ACR_WRHIGHFREQ), (__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * This return value can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + * @arg FLASH_LATENCY_5: FLASH Five wait states + * @arg FLASH_LATENCY_6: FLASH Six wait states + * @arg FLASH_LATENCY_7: FLASH Seven wait states + * @arg FLASH_LATENCY_8: FLASH Eight wait states + * @arg FLASH_LATENCY_9: FLASH Nine wait states + * @arg FLASH_LATENCY_10: FLASH Ten wait states + * @arg FLASH_LATENCY_11: FLASH Eleven wait states + * @arg FLASH_LATENCY_12: FLASH Twelve wait states + * @arg FLASH_LATENCY_13: FLASH Thirteen wait states + * @arg FLASH_LATENCY_14: FLASH Fourteen wait states + * @arg FLASH_LATENCY_15: FLASH Fifteen wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, (FLASH_ACR_LATENCY | FLASH_ACR_WRHIGHFREQ)) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of program interrupt + * @arg FLASH_IT_WRPERR: Write protection error interrupt + * @arg FLASH_IT_PGSERR: Programming sequence error interrupt + * @arg FLASH_IT_STRBERR: Strobe error interrupt + * @arg FLASH_IT_OBLERR: Option byte loading error interrupt + * @arg FLASH_IT_INCERR: Inconsistency error interrupt + * @arg FLASH_IT_RDSERR: Read security error interrupt + * @arg FLASH_IT_SNECCERR: ECC single error interrupt + * @arg FLASH_IT_DBECCERR: ECC double error interrupt + * @arg FLASH_IT_CRCEND: CRC end of calculation interrupt + * @arg FLASH_IT_CRCERR: CRC error interrupt + * @arg FLASH_IT_KVERR: Key valid error interrupt + * @arg FLASH_IT_KTERR: Key transfer error interrupt + * @arg FLASH_IT_OPTERR: Options byte change error interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_IER) != 0U)\ + { SET_BIT(FLASH->IER, ((__INTERRUPT__) & FLASH_IT_IER)); }\ + if(((__INTERRUPT__) & FLASH_IT_OPTCR) != 0U)\ + { SET_BIT(FLASH->OPTCR, ((__INTERRUPT__) & FLASH_IT_OPTCR)); }\ + } while(0) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of program interrupt + * @arg FLASH_IT_WRPERR: Write protection error interrupt + * @arg FLASH_IT_PGSERR: Programming sequence error interrupt + * @arg FLASH_IT_STRBERR: Strobe error interrupt + * @arg FLASH_IT_OBLERR: Option byte loading error interrupt + * @arg FLASH_IT_INCERR: Inconsistency error interrupt + * @arg FLASH_IT_RDSERR: Read security error interrupt + * @arg FLASH_IT_SNECCERR: ECC single error interrupt + * @arg FLASH_IT_DBECCERR: ECC double error interrupt + * @arg FLASH_IT_CRCEND: CRC end of calculation interrupt + * @arg FLASH_IT_CRCERR: CRC error interrupt + * @arg FLASH_IT_KVERR: Key valid error interrupt + * @arg FLASH_IT_KTERR: Key transfer error interrupt + * @arg FLASH_IT_OPTERR: Options byte change error interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_IER) != 0U)\ + { CLEAR_BIT(FLASH->IER, ((__INTERRUPT__) & FLASH_IT_IER)); }\ + if(((__INTERRUPT__) & FLASH_IT_OPTCR) != 0U)\ + { CLEAR_BIT(FLASH->OPTCR, ((__INTERRUPT__) & FLASH_IT_OPTCR)); }\ + } while(0) + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of program flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_STRBERR: FLASH Strobe error flag + * @arg FLASH_FLAG_OBLERR: FLASH Option byte loading error flag + * @arg FLASH_FLAG_INCERR: FLASH Inconsistency error flag + * @arg FLASH_FLAG_RDSERR: FLASH Read security error flag + * @arg FLASH_FLAG_SNECCERR: FLASH ECC single error flag + * @arg FLASH_FLAG_DBECCERR: FLASH ECC double error flag + * @arg FLASH_FLAG_CRCEND: FLASH CRC end of calculation flag + * @arg FLASH_FLAG_CRCERR: FLASH CRC error flag + * @arg FLASH_FLAG_KVERR: FLASH Key valid error flag + * @arg FLASH_FLAG_KTERR: FLASH Key transfer error flag + * @arg FLASH_FLAG_OPTERR: FLASH Options byte change error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & FLASH_FLAG_OPTISR_ERRORS) != 0U) ? \ + (READ_BIT(FLASH->OPTISR, (__FLAG__)) == (__FLAG__)) : \ + (READ_BIT(FLASH->ISR, (__FLAG__)) == (__FLAG__))) + +/** + * @brief Clear the FLASH's pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of program flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_STRBERR: FLASH Strobe error flag + * @arg FLASH_FLAG_OBLERR: FLASH Option byte loading error flag + * @arg FLASH_FLAG_INCERR: FLASH Inconsistency error flag + * @arg FLASH_FLAG_RDSERR: FLASH Read security error flag + * @arg FLASH_FLAG_SNECCERR: FLASH ECC single error flag + * @arg FLASH_FLAG_DBECCERR: FLASH ECC double error flag + * @arg FLASH_FLAG_CRCEND: FLASH CRC end of calculation flag + * @arg FLASH_FLAG_CRCERR: FLASH CRC error flag + * @arg FLASH_FLAG_KVERR: FLASH Key valid error flag + * @arg FLASH_FLAG_KTERR: FLASH Key transfer error flag + * @arg FLASH_FLAG_OPTERR: FLASH Options byte change error flag + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & FLASH_FLAG_OPTISR_ERRORS) != 0U)\ + { WRITE_REG(FLASH->OPTICR, ((__FLAG__) & FLASH_FLAG_OPTISR_ERRORS)); }\ + if(((__FLAG__) & FLASH_FLAG_ISR_FLAGS) != 0U)\ + { WRITE_REG(FLASH->ICR, ((__FLAG__) & FLASH_FLAG_ISR_FLAGS)); }\ + } while(0) +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32h7rsxx_hal_flash_ex.h" + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t DataAddress); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t DataAddress); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_BANK_SIZE FLASH_SIZE + +#define FLASH_SECTOR_NB 8U + +#define FLASH_SECTOR_SIZE 0x2000UL /* 8 KB */ + +#define FLASH_HDP_BLOCK_NB 0x100U + +#define FLASH_TIMEOUT_VALUE 1000U /* 1 s */ + +#define FLASH_BYTE_MASK 0x00000000U +#define FLASH_HALFWORD_MASK 0x40000000U +#define FLASH_WORD_MASK 0x80000000U +#define FLASH_DOUBLEWORD_MASK 0xC0000000U +#define FLASH_WORD_SIZE_MASK FLASH_DOUBLEWORD_MASK +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_SECTORS) ||\ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_BYTE) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_QUADWORD) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_OTP_HALFWORD) ||\ + ((VALUE) == FLASH_TYPEPROGRAM_OTP_WORD)) + +#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE+FLASH_SIZE))) + +#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= OTP_AREA_BASE) && ((ADDRESS) < (OTP_AREA_BASE + OTP_SIZE))) + +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) ((IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS)) || (IS_FLASH_OTP_ADDRESS(ADDRESS))) + +#define IS_FLASH_SECTOR(SECTOR) ((SECTOR) < FLASH_SECTOR_NB) + +#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP |\ + OPTIONBYTE_USER | OPTIONBYTE_HDP | OPTIONBYTE_NV))) + +#define IS_OB_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= 0x1FFFU) && ((TYPE) != 0U)) + +#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \ + ((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3)) + +#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW)) + +#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST)) + +#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST)) + +#define IS_OB_USER_XSPI1_HSLV(VALUE) (((VALUE) == OB_XSPI1_HSLV_DISABLE) || ((VALUE) == OB_XSPI1_HSLV_ENABLE)) + +#define IS_OB_USER_XSPI2_HSLV(VALUE) (((VALUE) == OB_XSPI2_HSLV_DISABLE) || ((VALUE) == OB_XSPI2_HSLV_ENABLE)) + +#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN)) + +#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN)) + +#define IS_OB_USER_VDDIO_HSLV(VALUE) (((VALUE) == OB_VDDIO_HSLV_DISABLE) || ((VALUE) == OB_VDDIO_HSLV_ENABLE)) + +#define IS_OB_USER_ITCM_AXI_SHARE(VALUE) (((VALUE) == OB_ITCM_AXI_SHARE_0) || ((VALUE) == OB_ITCM_AXI_SHARE_1) || \ + ((VALUE) == OB_ITCM_AXI_SHARE_2) || ((VALUE) == OB_ITCM_AXI_SHARE_3) || \ + ((VALUE) == OB_ITCM_AXI_SHARE_4) || ((VALUE) == OB_ITCM_AXI_SHARE_5) || \ + ((VALUE) == OB_ITCM_AXI_SHARE_6) || ((VALUE) == OB_ITCM_AXI_SHARE_7)) + +#define IS_OB_USER_DTCM_AXI_SHARE(VALUE) (((VALUE) == OB_DTCM_AXI_SHARE_0) || ((VALUE) == OB_DTCM_AXI_SHARE_1) || \ + ((VALUE) == OB_DTCM_AXI_SHARE_2) || ((VALUE) == OB_DTCM_AXI_SHARE_3) || \ + ((VALUE) == OB_DTCM_AXI_SHARE_4) || ((VALUE) == OB_DTCM_AXI_SHARE_5) || \ + ((VALUE) == OB_DTCM_AXI_SHARE_6) || ((VALUE) == OB_DTCM_AXI_SHARE_7)) + +#define IS_OB_USER_AXISRAM_ECC(VALUE) (((VALUE) == OB_AXISRAM_ECC_ENABLE) || ((VALUE) == OB_AXISRAM_ECC_DISABLE)) + +#define IS_OB_USER_I2C_NI3C(VALUE) (((VALUE) == OB_I2C_NI3C_I2C) || ((VALUE) == OB_I2C_NI3C_I3C)) + +#define IS_OB_HDP_PAGE(PAGE) ((PAGE) < FLASH_HDP_BLOCK_NB) + +#define IS_OB_NVSTATE(VALUE) (((VALUE) == OB_NVSTATE_OPEN) || ((VALUE) ==OB_NVSTATE_CLOSE)) + +#define IS_OB_ROT_TYPE(VALUE) ((VALUE) <= 0x7U) + +#define IS_OB_OEM_PROVD(VALUE) ((VALUE) <= 0x000000FFU) + +#define IS_OB_DBG_AUTH(VALUE) ((VALUE) <= 0x0000FF00U) + +#define IS_OB_IROT_SELECT(VALUE) ((VALUE) <= 0xFF000000U) + +#define IS_OB_EPOCH(VALUE) ((VALUE) <= 0xFFFFFFU) + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4) || ((LATENCY) == FLASH_LATENCY_5) || \ + ((LATENCY) == FLASH_LATENCY_6) || ((LATENCY) == FLASH_LATENCY_7) || \ + ((LATENCY) == FLASH_LATENCY_8) || ((LATENCY) == FLASH_LATENCY_9) || \ + ((LATENCY) == FLASH_LATENCY_10) || ((LATENCY) == FLASH_LATENCY_11) || \ + ((LATENCY) == FLASH_LATENCY_12) || ((LATENCY) == FLASH_LATENCY_13) || \ + ((LATENCY) == FLASH_LATENCY_14) || ((LATENCY) == FLASH_LATENCY_15)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_FLASH_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash_ex.h new file mode 100644 index 000000000..8a35afc84 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_flash_ex.h @@ -0,0 +1,262 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_FLASH_EX_H +#define STM32H7RSxx_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t Index; /*!< Index of the key. + This parameter can be a value between 0 and 31 */ + uint32_t Size; /*!< Size of the key. + This parameter must be a value of @ref FLASH_Key_Size */ + uint32_t HDPLLevel; /*!< HDPL level of the key. + This parameter must be a value of @ref FLASH_KEY_Level */ +} FLASH_KeyConfigTypeDef; + +/** + * @brief FLASH CRC configuration structure definition + */ +typedef struct +{ + uint32_t TypeCRC; /*!< CRC Selection Type. + This parameter can be a value of @ref FLASHEx_CRC_Selection_Type */ + + uint32_t BurstSize; /*!< CRC Burst Size. + This parameter can be a value of @ref FLASHEx_CRC_Burst_Size */ + + uint32_t Sector; /*!< Initial FLASH sector from which starts the CRC computation + This parameter must be a value between 0 and (max number of sector - 1)*/ + + uint32_t NbSectors; /*!< Number of sectors to be computed. + This parameter must be a value between 1 and + (max number of sectors - value of Initial sector)*/ + + uint32_t CRCStartAddr; /*!< CRC Start address. + This parameter must be a value between begin address and end address of a bank */ + + uint32_t CRCEndAddr; /*!< CRC End address. + This parameter must be a value between CRC Start address and end address of a bank */ + +} FLASH_CRCInitTypeDef; + +/** + * @brief FLASH ECC information structure definition + */ +typedef struct +{ + uint32_t Area; /*!< Area from which an ECC was detected. + This parameter can be a value of @ref FLASHEx_ECC_Area */ + uint32_t Address; /*!< Flash address from which en ECC error was detected. + This parameter must be a value between begin address and end address of the Flash */ + uint32_t MasterID; /*!< Master that initiated transfer on which error was detected + This parameter can be a value of @ref FLASHEx_ECC_Master */ +} FLASH_EccInfoTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Constants + * @{ + */ +/** @defgroup FLASH_Key_Size FLASH Option Bytes Key Size + * @{ + */ +#define FLASH_KEY_32_BITS 0x0000000U /*!< Key size is 32 bits */ +#define FLASH_KEY_64_BITS FLASH_OBKCR_OBKSIZE_0 /*!< Key size is 64 bits */ +#define FLASH_KEY_128_BITS FLASH_OBKCR_OBKSIZE_1 /*!< Key size is 128 bits */ +#define FLASH_KEY_256_BITS FLASH_OBKCR_OBKSIZE /*!< Key size is 256 bits */ +/** + * @} + */ + +/** @defgroup FLASH_KEY_Level FLASH Option Bytes Key HDPL level + * @{ + */ +#define FLASH_KEY_LEVEL_CURRENT 0x00000000U /*!< Key stored for the HDPL indicated in SBS_HDPLSR */ +#define FLASH_KEY_LEVEL_NEXT FLASH_OBKCR_NEXTKL_0 /*!< Key stored for the HDPL indicated in SBS_HDPLSR + 1 */ +#define FLASH_KEY_LEVEL_PLUS_TWO FLASH_OBKCR_NEXTKL_1 /*!< Key stored for the HDPL indicated in SBS_HDPLSR + 2 */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Selection_Type FLASH CRC Selection Type + * @{ + */ +#define FLASH_CRC_ADDR 0x00000000U /*!< CRC selection type by address */ +#define FLASH_CRC_SECTORS FLASH_CRCCR_CRC_BY_SECT /*!< CRC selection type by sectors */ +#define FLASH_CRC_BANK (FLASH_CRCCR_ALL_SECT | FLASH_CRCCR_CRC_BY_SECT) /*!< CRC selection type all bank */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Burst_Size FLASH CRC Burst Size + * @{ + */ +#define FLASH_CRC_BURST_SIZE_4 0x00000000U /*!< Every burst has a size of 4 Flash words (64 Bytes) */ +#define FLASH_CRC_BURST_SIZE_16 FLASH_CRCCR_CRC_BURST_0 /*!< Every burst has a size of 16 Flash words (256 Bytes) */ +#define FLASH_CRC_BURST_SIZE_64 FLASH_CRCCR_CRC_BURST_1 /*!< Every burst has a size of 64 Flash words (1 kByte) */ +#define FLASH_CRC_BURST_SIZE_256 FLASH_CRCCR_CRC_BURST /*!< Every burst has a size of 256 Flash words (4 kBytes) */ +/** + * @} + */ + +/** @defgroup FLASHEx_ECC_Area FLASH ECC Area + * @{ + */ +#define FLASH_ECC_AREA_USER_BANK1 0x00000000U /*!< FLASH bank 1 area */ +#define FLASH_ECC_AREA_SYSTEM 0x00000001U /*!< System FLASH area */ +#define FLASH_ECC_AREA_OTP 0x00000002U /*!< FLASH OTP area */ +#define FLASH_ECC_AREA_READ_ONLY 0x00000004U /*!< FLASH Read-only area */ +/** + * @} + */ + +/** @defgroup FLASHEx_ECC_Master FLASH ECC Master + * @{ + */ +#define FLASH_ECC_MASTER_CPU1 0x00000000U /*!< ECC error occurs on a CPU1 transaction */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(const FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(const FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(const FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_OTPLockConfig(uint32_t OTPLBlock); +uint32_t HAL_FLASHEx_GetOTPLock(void); +HAL_StatusTypeDef HAL_FLASHEx_KeyConfig(const FLASH_KeyConfigTypeDef *pKeyConfig, const uint32_t *pKey); +HAL_StatusTypeDef HAL_FLASHEx_GetKey(const FLASH_KeyConfigTypeDef *pKeyConfig, uint32_t *pKey); +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(const FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result); +/** + * @} + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group3 + * @{ + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt(void); +void HAL_FLASHEx_DisableEccCorrectionInterrupt(void); +void HAL_FLASHEx_EnableEccDetectionInterrupt(void); +void HAL_FLASHEx_DisableEccDetectionInterrupt(void); +void HAL_FLASHEx_GetEccInfo(FLASH_EccInfoTypeDef *pData); +void HAL_FLASHEx_ECCD_IRQHandler(void); +__weak void HAL_FLASHEx_EccDetectionCallback(void); +__weak void HAL_FLASHEx_EccCorrectionCallback(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_SectorErase(uint32_t Sector); +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_KEY_INDEX(VALUE) ((VALUE) < 0x20U) + +#define IS_KEY_SIZE(VALUE) (((VALUE) == FLASH_KEY_32_BITS) || ((VALUE) == FLASH_KEY_64_BITS) || \ + ((VALUE) == FLASH_KEY_128_BITS) || ((VALUE) == FLASH_KEY_256_BITS)) + +#define IS_KEY_HDPL_LEVEL(VALUE) (((VALUE) == FLASH_KEY_LEVEL_CURRENT) || \ + ((VALUE) == FLASH_KEY_LEVEL_NEXT) || \ + ((VALUE) == FLASH_KEY_LEVEL_PLUS_TWO)) + +#define IS_OB_OTP_BLOCK(VALUE) ((VALUE) <= 0xFFFFU) + +#define IS_FLASH_TYPE_CRC(VALUE) (((VALUE) == FLASH_CRC_ADDR) || ((VALUE) == FLASH_CRC_SECTORS) ||\ + ((VALUE) == FLASH_CRC_BANK)) + +#define IS_FLASH_BURST_SIZE_CRC(VALUE) (((VALUE) == FLASH_CRC_BURST_SIZE_4) || ((VALUE) == FLASH_CRC_BURST_SIZE_16) ||\ + ((VALUE) == FLASH_CRC_BURST_SIZE_64) || ((VALUE) == FLASH_CRC_BURST_SIZE_256)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_FLASH_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxmmu.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxmmu.h new file mode 100644 index 000000000..b84cf9827 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxmmu.h @@ -0,0 +1,370 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gfxmmu.h + * @author MCD Application Team + * @brief Header file of GFXMMU HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_GFXMMU_H +#define STM32H7RSxx_HAL_GFXMMU_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(GFXMMU) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup GFXMMU + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GFXMMU_Exported_Types GFXMMU Exported Types + * @{ + */ + +/** + * @brief HAL GFXMMU states definition + */ +typedef enum +{ + HAL_GFXMMU_STATE_RESET = 0x00U, /*!< GFXMMU not initialized. */ + HAL_GFXMMU_STATE_READY = 0x01U, /*!< GFXMMU initialized and ready for use. */ +} HAL_GFXMMU_StateTypeDef; + +/** + * @brief GFXMMU buffers structure definition + */ +typedef struct +{ + uint32_t Buf0Address; /*!< Physical address of buffer 0. */ + uint32_t Buf1Address; /*!< Physical address of buffer 1. */ + uint32_t Buf2Address; /*!< Physical address of buffer 2. */ + uint32_t Buf3Address; /*!< Physical address of buffer 3. */ +} GFXMMU_BuffersTypeDef; + +/** + * @brief GFXMMU interrupts structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Interrupts enable/disable. */ + uint32_t UsedInterrupts; /*!< Interrupts used. + This parameter can be a values combination of @ref GFXMMU_Interrupts. + @note: Useful only when interrupts are enabled. */ +} GFXMMU_InterruptsTypeDef; + +/** + * @brief GFXMMU init structure definition + */ +typedef struct +{ + uint32_t BlockSize; /*!< Size of virtual memory block. + This parameter can be a value of @ref GFXMMU_BlockSize. */ + uint32_t DefaultValue; /*!< Value returned when virtual memory location not physically mapped. */ + /* @note: Useful only when address translation is enabled. */ + FunctionalState AddressTranslation; /*!< Address translation enable/disable. */ + GFXMMU_BuffersTypeDef Buffers; /*!< Physical buffers addresses. */ + GFXMMU_InterruptsTypeDef Interrupts; /*!< Interrupts parameters. */ +} GFXMMU_InitTypeDef; + +/** + * @brief GFXMMU handle structure definition + */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +typedef struct __GFXMMU_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ +{ + GFXMMU_TypeDef *Instance; /*!< GFXMMU instance. */ + GFXMMU_InitTypeDef Init; /*!< GFXMMU init parameters. */ + HAL_GFXMMU_StateTypeDef State; /*!< GFXMMU state. */ + __IO uint32_t ErrorCode; /*!< GFXMMU error code. */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) + void (*ErrorCallback)(struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU error callback. */ + void (*MspInitCallback)(struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU MSP init callback. */ + void (*MspDeInitCallback)(struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU MSP de-init callback. */ +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ +} GFXMMU_HandleTypeDef; + +/** + * @brief GFXMMU LUT line structure definition + */ +typedef struct +{ + uint32_t LineNumber; /*!< LUT line number. + This parameter must be a number between Min_Data = 0 and Max_Data = 1023. */ + uint32_t LineStatus; /*!< LUT line enable/disable. + This parameter can be a value of @ref GFXMMU_LutLineStatus. */ + uint32_t FirstVisibleBlock; /*!< First visible block on this line. + This parameter must be a number between Min_Data = 0 and Max_Data = 255. */ + uint32_t LastVisibleBlock; /*!< Last visible block on this line. + This parameter must be a number between Min_Data = 0 and Max_Data = 255. */ + int32_t LineOffset; /*!< Offset of block 0 of the current line in physical buffer. + This parameter must be a number between Min_Data = -255 and Max_Data = 261888. + @note: Line offset has to be computed with the following formula: + LineOffset = [(Blocks already used) - (1st visible block)]. */ +} GFXMMU_LutLineTypeDef; + +/** + * @brief GFXMMU packing structure definition + */ +typedef struct +{ + FunctionalState Buffer0Activation; /*!< Packing on buffer 0 enable/disable. */ + uint32_t Buffer0Mode; /*!< Buffer 0 packing mode. + This parameter can be a value of @ref GFXMMU_PackingModes. */ + FunctionalState Buffer1Activation; /*!< Packing on buffer 1 enable/disable. */ + uint32_t Buffer1Mode; /*!< Buffer 1 packing mode. + This parameter can be a value of @ref GFXMMU_PackingModes. */ + FunctionalState Buffer2Activation; /*!< Packing on buffer 2 enable/disable. */ + uint32_t Buffer2Mode; /*!< Buffer 2 packing mode. + This parameter can be a value of @ref GFXMMU_PackingModes. */ + FunctionalState Buffer3Activation; /*!< Packing on buffer 3 enable/disable. */ + uint32_t Buffer3Mode; /*!< Buffer 3 packing mode. + This parameter can be a value of @ref GFXMMU_PackingModes. */ + uint32_t DefaultAlpha; /*!< Default alpha value. + This parameter must be a number between Min_Data = 0 and Max_Data = 255. */ +} GFXMMU_PackingTypeDef; + +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +/** + * @brief GFXMMU callback ID enumeration definition + */ +typedef enum +{ + HAL_GFXMMU_ERROR_CB_ID = 0x00U, /*!< GFXMMU error callback ID. */ + HAL_GFXMMU_MSPINIT_CB_ID = 0x01U, /*!< GFXMMU MSP init callback ID. */ + HAL_GFXMMU_MSPDEINIT_CB_ID = 0x02U /*!< GFXMMU MSP de-init callback ID. */ +} HAL_GFXMMU_CallbackIDTypeDef; + +/** + * @brief GFXMMU callback pointer definition + */ +typedef void (*pGFXMMU_CallbackTypeDef)(GFXMMU_HandleTypeDef *hgfxmmu); +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GFXMMU_Exported_Constants GFXMMU Exported Constants + * @{ + */ + +/** @defgroup GFXMMU_BlockSize GFXMMU block size + * @{ + */ +#define GFXMMU_12BYTE_BLOCKS GFXMMU_CR_BS /*!< Blocks of 12-byte. */ +#define GFXMMU_16BYTE_BLOCKS 0x00000000U /*!< Blocks of 16-byte. */ +/** + * @} + */ + +/** @defgroup GFXMMU_Interrupts GFXMMU interrupts + * @{ + */ +#define GFXMMU_BUS_MASTER_ERROR_IT GFXMMU_CR_AMEIE /*!< Bus master error interrupt. */ +#define GFXMMU_BUFFER0_OVERFLOW_IT GFXMMU_CR_B0OIE /*!< Buffer 0 overflow interrupt. */ +#define GFXMMU_BUFFER1_OVERFLOW_IT GFXMMU_CR_B1OIE /*!< Buffer 1 overflow interrupt. */ +#define GFXMMU_BUFFER2_OVERFLOW_IT GFXMMU_CR_B2OIE /*!< Buffer 2 overflow interrupt. */ +#define GFXMMU_BUFFER3_OVERFLOW_IT GFXMMU_CR_B3OIE /*!< Buffer 3 overflow interrupt. */ +/** + * @} + */ + +/** @defgroup GFXMMU_Error_Code GFXMMU Error Code + * @{ + */ +#define GFXMMU_ERROR_NONE 0x00000000U /*!< No error. */ +#define GFXMMU_ERROR_BUFFER0_OVERFLOW GFXMMU_SR_B0OF /*!< Buffer 0 overflow. */ +#define GFXMMU_ERROR_BUFFER1_OVERFLOW GFXMMU_SR_B1OF /*!< Buffer 1 overflow. */ +#define GFXMMU_ERROR_BUFFER2_OVERFLOW GFXMMU_SR_B2OF /*!< Buffer 2 overflow. */ +#define GFXMMU_ERROR_BUFFER3_OVERFLOW GFXMMU_SR_B3OF /*!< Buffer 3 overflow. */ +#define GFXMMU_ERROR_BUS_MASTER GFXMMU_SR_AMEF /*!< Bus master error. */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +#define GFXMMU_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid callback error. */ +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup GFXMMU_LutLineStatus GFXMMU LUT line status + * @{ + */ +#define GFXMMU_LUT_LINE_DISABLE 0x00000000U /*!< LUT line disabled. */ +#define GFXMMU_LUT_LINE_ENABLE GFXMMU_LUTxL_EN /*!< LUT line enabled. */ +/** + * @} + */ + +/** @defgroup GFXMMU_PackingModes GFXMMU packing modes + * @{ + */ +#define GFXMMU_PACKING_MSB_REMOVE 0x00000000U /*!< Remove MSB during packing operation. */ +#define GFXMMU_PACKING_LSB_REMOVE 0x00000001U /*!< Remove LSB during packing operation. */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup GFXMMU_Exported_Macros GFXMMU Exported Macros + * @{ + */ + +/** @brief Reset GFXMMU handle state. + * @param __HANDLE__ GFXMMU handle. + * @retval None + */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +#define __HAL_GFXMMU_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_GFXMMU_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_GFXMMU_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_GFXMMU_STATE_RESET) +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GFXMMU_Exported_Functions GFXMMU Exported Functions + * @{ + */ + +/** @addtogroup GFXMMU_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_GFXMMU_Init(GFXMMU_HandleTypeDef *hgfxmmu); +HAL_StatusTypeDef HAL_GFXMMU_DeInit(GFXMMU_HandleTypeDef *hgfxmmu); +void HAL_GFXMMU_MspInit(GFXMMU_HandleTypeDef *hgfxmmu); +void HAL_GFXMMU_MspDeInit(GFXMMU_HandleTypeDef *hgfxmmu); +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +/* GFXMMU callbacks register/unregister functions *****************************/ +HAL_StatusTypeDef HAL_GFXMMU_RegisterCallback(GFXMMU_HandleTypeDef *hgfxmmu, + HAL_GFXMMU_CallbackIDTypeDef CallbackID, + pGFXMMU_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_GFXMMU_UnRegisterCallback(GFXMMU_HandleTypeDef *hgfxmmu, + HAL_GFXMMU_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup GFXMMU_Exported_Functions_Group2 Operations functions + * @{ + */ +/* Operation functions ********************************************************/ +HAL_StatusTypeDef HAL_GFXMMU_ConfigLut(const GFXMMU_HandleTypeDef *hgfxmmu, + uint32_t FirstLine, + uint32_t LinesNumber, + uint32_t Address); + +HAL_StatusTypeDef HAL_GFXMMU_DisableLutLines(const GFXMMU_HandleTypeDef *hgfxmmu, + uint32_t FirstLine, + uint32_t LinesNumber); + +HAL_StatusTypeDef HAL_GFXMMU_ConfigLutLine(const GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_LutLineTypeDef *lutLine); + +HAL_StatusTypeDef HAL_GFXMMU_ModifyBuffers(GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_BuffersTypeDef *Buffers); + +HAL_StatusTypeDef HAL_GFXMMU_ConfigPacking(GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_PackingTypeDef *pPacking); + +void HAL_GFXMMU_IRQHandler(GFXMMU_HandleTypeDef *hgfxmmu); + +void HAL_GFXMMU_ErrorCallback(GFXMMU_HandleTypeDef *hgfxmmu); +/** + * @} + */ + +/** @defgroup GFXMMU_Exported_Functions_Group3 State functions + * @{ + */ +/* State function *************************************************************/ +HAL_GFXMMU_StateTypeDef HAL_GFXMMU_GetState(const GFXMMU_HandleTypeDef *hgfxmmu); + +uint32_t HAL_GFXMMU_GetError(GFXMMU_HandleTypeDef *hgfxmmu); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GFXMMU_Private_Macros GFXMMU Private Macros + * @{ + */ +#define IS_GFXMMU_BLOCK_SIZE(VALUE) (((VALUE) == GFXMMU_12BYTE_BLOCKS) || \ + ((VALUE) == GFXMMU_16BYTE_BLOCKS)) +#define IS_GFXMMU_LUT_LINE_OFFSET(VALUE) (((VALUE) >= -255) && ((VALUE) <= 261888)) + +#define IS_GFXMMU_BUFFER_ADDRESS(VALUE) (((VALUE) & 0xFU) == 0U) + +#define IS_GFXMMU_INTERRUPTS(VALUE) (((VALUE) & 0x1FU) != 0U) + +#define IS_GFXMMU_LUT_LINE(VALUE) ((VALUE) < 1024U) + +#define IS_GFXMMU_LUT_LINES_NUMBER(VALUE) (((VALUE) > 0U) && ((VALUE) <= 1024U)) + +#define IS_GFXMMU_LUT_LINE_STATUS(VALUE) (((VALUE) == GFXMMU_LUT_LINE_DISABLE) || \ + ((VALUE) == GFXMMU_LUT_LINE_ENABLE)) + +#define IS_GFXMMU_LUT_BLOCK(VALUE) ((VALUE) < 256U) + +#define IS_GFXMMU_PACKING_MODE(VALUE) (((VALUE) == GFXMMU_PACKING_MSB_REMOVE) || \ + ((VALUE) == GFXMMU_PACKING_LSB_REMOVE)) + +#define IS_GFXMMU_DEFAULT_ALPHA_VALUE(VALUE) ((VALUE) < 256U) +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ +#endif /* GFXMMU */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_GFXMMU_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxtim.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxtim.h new file mode 100644 index 000000000..1184536d3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gfxtim.h @@ -0,0 +1,929 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gfxtim.h + * @author MCD Application Team + * @brief Header file of GFXTIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_GFXTIM_H +#define STM32H7RSxx_HAL_GFXTIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (GFXTIM) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup GFXTIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GFXTIM_Exported_Types GFXTIM Exported Types + * @{ + */ + +/** + * @brief HAL GFXTIM states definition + */ +typedef enum +{ + HAL_GFXTIM_STATE_RESET = 0x00U, /*!< GFXTIM not initialized */ + HAL_GFXTIM_STATE_READY = 0x01U, /*!< GFXTIM initialized and ready for use */ + HAL_GFXTIM_STATE_ERROR = 0xFFU /*!< GFXTIM state error */ +} HAL_GFXTIM_StateTypeDef; + +/** + * @brief GFXTIM initialization structure definition + */ +typedef struct +{ + uint32_t SynchroSrc; /*!< Synchronization signals (HSYNC and VSYNC) sources. + This parameter can be a value of @ref GFXTIM_SynchroSrc */ + uint32_t TearingEffectSrc; /*!< Tearing effect source + This parameter can be a value of @ref GFXTIM_TearingEffectSrc */ + uint32_t TearingEffectPolarity; /*!< Tearing effect source + This parameter can be a value of @ref GFXTIM_TearingEffectPolarity */ + uint32_t TearingEffectInterrupt; /*!< Tearing effect interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ +} GFXTIM_InitTypeDef; + +/** + * @brief GFXTIM handle structure definition + */ +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +typedef struct __GFXTIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ +{ + GFXTIM_TypeDef *Instance; /*!< GFXTIM instance */ + __IO HAL_GFXTIM_StateTypeDef State; /*!< GFXTIM state */ + __IO uint32_t ErrorCode; /*!< GFXTIM error code */ + GFXTIM_InitTypeDef Init; /*!< GFXTIM initialization */ +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) + void (*HAL_GFXTIM_AbsoluteTimer_AFCC1Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Absolute frame counter compare 1 callback */ + void (*HAL_GFXTIM_AbsoluteTimer_AFCOFCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Absolute frame counter overflow callback */ + void (*HAL_GFXTIM_AbsoluteTimer_ALCC1Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Absolute line counter compare 1 callback */ + void (*HAL_GFXTIM_AbsoluteTimer_ALCC2Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Absolute line counter compare 2 callback */ + void (*HAL_GFXTIM_AbsoluteTimer_ALCOFCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Absolute line counter overflow callback */ + void (*HAL_GFXTIM_RelativeTimer_RFC1RCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Relative frame counter 1 reload callback */ + void (*HAL_GFXTIM_RelativeTimer_RFC2RCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Relative frame counter 2 reload callback */ + void (*HAL_GFXTIM_TECallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Tearing effect callback */ + void (*HAL_GFXTIM_EventGenerator_EV1Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Event events 1 callback */ + void (*HAL_GFXTIM_EventGenerator_EV2Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Event events 2 callback */ + void (*HAL_GFXTIM_EventGenerator_EV3Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Event events 3 callback */ + void (*HAL_GFXTIM_EventGenerator_EV4Callback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Event events 4 callback */ + void (*HAL_GFXTIM_WatchdogTimer_AlarmCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Watchdog alarm callback */ + void (*HAL_GFXTIM_WatchdogTimer_PreAlarmCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM Watchdog pre alarm callback */ + void (*ErrorCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM error callback */ + void (*MspInitCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM MSP initialization user callback */ + void (*MspDeInitCallback)(struct __GFXTIM_HandleTypeDef *hgfxtim); /*!< GFXTIM MSP de-initialization user callback */ +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ +} GFXTIM_HandleTypeDef; + + +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +/** + * @brief GFXTIM callback ID enumeration definition + */ +typedef enum +{ + HAL_GFXTIM_AFC_COMPARE1_CB_ID = 1U, /*!< GFXTIM Absolute frame counter compare 1 callback ID */ + HAL_GFXTIM_AFC_OVERFLOW_CB_ID = 2U, /*!< GFXTIM Absolute frame counter overflow callback ID */ + HAL_GFXTIM_ALC_COMPARE1_CB_ID = 3U, /*!< GFXTIM Absolute line counter compare 1 callback ID */ + HAL_GFXTIM_ALC_COMPARE2_CB_ID = 4U, /*!< GFXTIM Absolute line counter compare 2 callback ID */ + HAL_GFXTIM_ALC_OVERFLOW_CB_ID = 5U, /*!< GFXTIM Absolute line counter overflow callback ID */ + HAL_GFXTIM_RFC1_RELOAD_CB_ID = 6U, /*!< GFXTIM Relative frame counter 1 reload callback ID */ + HAL_GFXTIM_RFC2_RELOAD_CB_ID = 7U, /*!< GFXTIM Relative frame counter 2 reload callback ID */ + HAL_GFXTIM_TE_CB_ID = 8U, /*!< GFXTIM External tearing effect callback ID */ + HAL_GFXTIM_EVENT1_CB_ID = 9U, /*!< GFXTIM Event events 1 callback ID */ + HAL_GFXTIM_EVENT2_CB_ID = 10U, /*!< GFXTIM Event events 2 callback ID */ + HAL_GFXTIM_EVENT3_CB_ID = 11U, /*!< GFXTIM Event events 3 callback ID */ + HAL_GFXTIM_EVENT4_CB_ID = 12U, /*!< GFXTIM Event events 4 callback ID */ + HAL_GFXTIM_WDG_ALARM_CB_ID = 13U, /*!< GFXTIM Watchdog alarm callback ID */ + HAL_GFXTIM_WDG_PREALARM_CB_ID = 14U, /*!< GFXTIM Watchdog pre alarm callback ID */ + HAL_GFXTIM_ERROR_CB_ID = 15U, /*!< GFXTIM error callback ID */ + HAL_GFXTIM_MSP_INIT_CB_ID = 16U, /*!< GFXTIM MSP initialization user callback ID */ + HAL_GFXTIM_MSP_DEINIT_CB_ID = 17U, /*!< GFXTIM MSP de-initialization user callback ID */ +} HAL_GFXTIM_CallbackIDTypeDef; + +/** + * @brief GFXTIM callback pointers definition + */ +typedef void (*pGFXTIM_CallbackTypeDef)(GFXTIM_HandleTypeDef *hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + + + + +/** + * @brief GFXTIM clock generator structure definition + */ +typedef struct +{ + uint32_t LCCHwReloadSrc; /*!< Line Clock Counter hardware reload source + This parameter can be a value of @ref GFXTIM_LCCHwReloadSrc */ + + uint32_t LCCReloadValue; /*!< Line Clock Counter reload value (22 bits) + This parameter must be a number between Min_Data = 1 and Max_Data = 4194303 */ + + uint32_t LCCClockSrc; /*!< Line Clock Counter Clock Source + This parameter can be a value of @ref GFXTIM_LCCClockSrc */ + + uint32_t LineClockSrc; /*!< Line Clock Source + This parameter can be a value of @ref GFXTIM_LineClockSrc */ + + uint32_t FCCHwReloadSrc; /*!< Frame Clock Counter hardware reload source + This parameter can be a value of @ref GFXTIM_FCCHwReloadSrc */ + + uint32_t FCCReloadValue; /*!< Frame Clock Counter reload value (12 bits) + This parameter must be a number between Min_Data = 1 and Max_Data = 4095 */ + + uint32_t FCCClockSrc; /*!< Frame Clock Counter Clock Source + This parameter can be a value of @ref GFXTIM_FCCClockSrc */ + + uint32_t FrameClockSrc; /*!< Frame Clock Source + This parameter can be a value of @ref GFXTIM_FrameClockSrc */ + + uint32_t LineClockCalib; /*!< Debug purpose + This parameter can be a value of @ref GFXTIM_LineClockCalib */ + + uint32_t FrameClockCalib; /*!< Debug purpose + This parameter can be a value of @ref GFXTIM_FrameClockCalib */ +} GFXTIM_ClockGeneratorConfigTypeDef; + +/** + * @brief GFXTIM absolute timer configuration structure + */ +typedef struct +{ + uint32_t FrameCompare1Value; /*!< Absolute Frame Compare 1 value (20 bits) + This parameter must be a number between 1 and 1048575 */ + + uint32_t FrameCounterValue; /*!< Absolute Frame Counter initial value (20 bits) + This parameter must be a number between 1 and 1048575 */ + + uint32_t FrameOverflowInterrupt; /*!< Absolute Frame Counter Overflow Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ + + uint32_t FrameCompare1Interrupt; /*!< Absolute Frame Compare 1 Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ + + uint32_t LineCompare1Value; /*!< Absolute Line Compare 1 value (12 bits) + This parameter must be a number between 1 and 4095 */ + + uint32_t LineCompare2Value; /*!< Absolute Line Compare 2 value (12 bits) + This parameter must be a number between 1 and 4095 */ + + uint32_t LineCounterValue; /*!< Absolute Line Counter value (12 bits) + This parameter must be a number between 1 and 4095 */ + + uint32_t LineOverflowInterrupt; /*!< Absolute Line Counter Overflow Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ + + uint32_t LineCompare1Interrupt; /*!< Absolute Line Compare 1 Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ + + uint32_t LineCompare2Interrupt; /*!< Absolute Line Compare 2 Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ +} GFXTIM_AbsoluteTimerConfigTypeDef; + + +/** + * @brief GFXTIM relative timer configuration structure + */ +typedef struct +{ + uint32_t AutoReloadValue; /*!< Auto reload value (12 bits) + This parameter must be a number between 1 and 4095 */ + + uint32_t CounterMode; /*!< Counter Mode + This parameter can be a value of GFXTIM_RelativeCounterMode */ + uint32_t ReloadInterrupt; /*!< Relative Frame Counter Reload Interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ +} GFXTIM_RelativeTimerConfigTypeDef; + + +/** + * @brief GFXTIM event generator configuration structure + */ +typedef struct +{ + uint32_t LineEvent; /*!< Line event selection + This parameter can be a value of GFXTIM_EventLine */ + + uint32_t FrameEvent; /*!< Frmae event selection + This parameter can be a value of GFXTIM_EventFrame */ + + uint32_t EventInterrupt; /*!< Event interrupt Enable or Disable + This parameter can be a value of @ref GFXTIM_Interrupt */ +} GFXTIM_EventGeneratorConfigTypeDef; + +/** + * @brief GFXTIM watchdog configuration structure + */ +typedef struct +{ + uint32_t ClockSrc; /*!< Clock source + This parameter can be a value of GFXTIM_WatchdogClockSrc */ + + uint32_t AutoReloadValue; /*!< Reload value (16 bits) + This parameter must be a number between 1 and 65535 */ + + uint32_t HwReloadConfig; /*!< Hardware reload configuration + This parameter can be a value of GFXTIM_WatchdogHwReloadConfig */ + + uint32_t PreAlarmValue; /*!< Pre-alarm value (16 bits) + This parameter must be a number between 1 and 65535 */ + + uint32_t AlarmInterrupt; /*!< Interrupt Enable or Disable when watchdog counter reaches 0 + This parameter can be a value of @ref GFXTIM_Interrupt */ + + uint32_t PreAlarmInterrupt; /*!< Interrupt Enable or Disable when watchdog counter reaches pre-alarm value + This parameter can be a value of @ref GFXTIM_Interrupt */ +} GFXTIM_WatchdogConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GFXTIM_Exported_Constants GFXTIM Exported Constants + * @{ + */ + +/** @defgroup GFXTIM_ErrorCode GFXTIM Error Code + * @{ + */ +#define GFXTIM_ERROR_NONE 0U /*!< No error */ +#define GFXTIM_ERROR_STATE 1U /*!< State error */ +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +#define GFXTIM_ERROR_INVALID_CALLBACK 2U /*!< Invalid callback error occurs */ +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup GFXTIM_Interrupt GFXTIM Interrupt + * @{ + */ +#define GFXTIM_IT_DISABLE 0U /*!< gfxtim_interrupt disable */ +#define GFXTIM_IT_ENABLE 1U /*!< gfxtim_interrupt enable */ + +/** + * @} + */ + +/** @defgroup GFXTIM_SynchroSrc GFXTIM Synchronization Source + * @{ + */ +#define GFXTIM_SYNC_SRC_HSYNC_VSYNC_0 0U /*!< gfxtim_hsync[0] and gfxtim_vsync[0] are used as synchronization source */ +#define GFXTIM_SYNC_SRC_HSYNC_VSYNC_1 GFXTIM_CR_SYNCS_0 /*!< gfxtim_hsync[1] and gfxtim_vsync[1] are used as synchronization source */ +#define GFXTIM_SYNC_SRC_HSYNC_VSYNC_2 GFXTIM_CR_SYNCS_1 /*!< gfxtim_hsync[2] and gfxtim_vsync[2] are used as synchronization source */ +#define GFXTIM_SYNC_SRC_HSYNC_VSYNC_3 (GFXTIM_CR_SYNCS_0 | GFXTIM_CR_SYNCS_1) /*!< gfxtim_hsync[3] and gfxtim_vsync[3] are used as synchronization source */ +/** + * @} + */ + +/** @defgroup GFXTIM_TearingEffectSrc GFXTIM Tearing Effect Source + * @{ + */ +#define GFXTIM_TE_SRC_GPIO 0U /*!< Input pad rising */ +#define GFXTIM_TE_SRC_ITE GFXTIM_CR_TES_0 /*!< gfxtim_ite rising */ +#define GFXTIM_TE_SRC_HSYNC GFXTIM_CR_TES_1 /*!< HSYNC (see SynchroSrc) rising */ +#define GFXTIM_TE_SRC_VSYNC (GFXTIM_CR_TES_0 | GFXTIM_CR_TES_1) /*!< VSYNC (see SynchroSrc) rising */ +/** + * @} + */ + +/** @defgroup GFXTIM_TearingEffectPolarity GFXTIM Tearing Effect Polarity + * @{ + */ +#define GFXTIM_TE_RISING_EDGE 0U /*!< Tearing Effect active on rizing edge */ +#define GFXTIM_TE_FALLING_EDGE GFXTIM_CR_TEPOL /*!< Tearing Effect active on falling edge */ +/** + * @} + */ + +/** @defgroup GFXTIM_LCCHwReloadSrc GFXTIM Line Clock Counter Hardware Reload Source + * @{ + */ +#define GFXTIM_LCC_HW_RELOAD_SRC_NONE 0U /*!< No hardware reload */ +#define GFXTIM_LCC_HW_RELOAD_SRC_FCC_UNDERFLOW GFXTIM_CGCR_LCCHRS_0 /*!< FCC underflow */ +#define GFXTIM_LCC_HW_RELOAD_SRC_HSYNC_RISING GFXTIM_CGCR_LCCHRS_1 /*!< HSYNC rising */ +#define GFXTIM_LCC_HW_RELOAD_SRC_HSYNC_FALLING (GFXTIM_CGCR_LCCHRS_0 | GFXTIM_CGCR_LCCHRS_1) /*!< HSYNC falling */ +#define GFXTIM_LCC_HW_RELOAD_SRC_VSYNC_RISING GFXTIM_CGCR_LCCHRS_2 /*!< VSYNC rising */ +#define GFXTIM_LCC_HW_RELOAD_SRC_VSYNC_FALLING (GFXTIM_CGCR_LCCHRS_2 | GFXTIM_CGCR_LCCHRS_0) /*!< VSYNC falling */ +#define GFXTIM_LCC_HW_RELOAD_SRC_TE_RISING (GFXTIM_CGCR_LCCHRS_2 | GFXTIM_CGCR_LCCHRS_1) /*!< TE rising */ +#define GFXTIM_LCC_HW_RELOAD_SRC_TE_FALLING (GFXTIM_CGCR_LCCHRS_2 | GFXTIM_CGCR_LCCHRS_1 | GFXTIM_CGCR_LCCHRS_0) /*!< TE falling */ +/** + * @} + */ + +/** @defgroup GFXTIM_LCCClockSrc GFXTIM Line Clock Counter Clock Source + * @{ + */ +#define GFXTIM_LCC_CLK_SRC_DISABLE 0U /*!< Disable line clock counter */ +#define GFXTIM_LCC_CLK_SRC_SYSCLOCK GFXTIM_CGCR_LCCCS /*!< System clock as line clock counter source*/ +/** + * @} + */ + +/** @defgroup GFXTIM_LineClockSrc GFXTIM Line Clock Source + * @{ + */ +#define GFXTIM_LINE_CLK_SRC_LCC_UNDERFLOW 0U /*!< Line Clock Counter underflow */ +#define GFXTIM_LINE_CLK_SRC_FCC_UNDERFLOW GFXTIM_CGCR_LCS_0 /*!< Frame Clock Counter underflow */ +#define GFXTIM_LINE_CLK_SRC_HSYNC_RISING GFXTIM_CGCR_LCS_1 /*!< HSYNC rising edge */ +#define GFXTIM_LINE_CLK_SRC_HSYNC_FALLING (GFXTIM_CGCR_LCS_0 | GFXTIM_CGCR_LCS_1) /*!< HSYNC falling edge*/ +#define GFXTIM_LINE_CLK_SRC_VSYNC_RISING GFXTIM_CGCR_LCS_2 /*!< VSYNC rising edge*/ +#define GFXTIM_LINE_CLK_SRC_VSYNC_FALLING (GFXTIM_CGCR_LCS_2 | GFXTIM_CGCR_LCS_0) /*!< VSYNC falling edge*/ +#define GFXTIM_LINE_CLK_SRC_TE_RISING (GFXTIM_CGCR_LCS_2 | GFXTIM_CGCR_LCS_1) /*!< TE rising edge*/ +#define GFXTIM_LINE_CLK_SRC_TE_FALLING (GFXTIM_CGCR_LCS_2 | GFXTIM_CGCR_LCS_1 | GFXTIM_CGCR_LCS_0) /*!< TE falling edge*/ +/** + * @} + */ + +/** @defgroup GFXTIM_FCCHwReloadSrc GFXTIM Frame Clock Counter Hardware Reload source + * @{ + */ +#define GFXTIM_FCC_HW_RELOAD_SRC_NONE 0U /*!< No hardware reload */ +#define GFXTIM_FCC_HW_RELOAD_SRC_LCC_UNDERFLOW GFXTIM_CGCR_FCCHRS_0 /*!< Line Clock Counter underflow */ +#define GFXTIM_FCC_HW_RELOAD_SRC_HSYNC_RISING GFXTIM_CGCR_FCCHRS_1 /*!< HSYNC rising edge */ +#define GFXTIM_FCC_HW_RELOAD_SRC_HSYNC_FALLING (GFXTIM_CGCR_FCCHRS_0 | GFXTIM_CGCR_FCCHRS_1) /*!< HSYNC falling edge */ +#define GFXTIM_FCC_HW_RELOAD_SRC_VSYNC_RISING GFXTIM_CGCR_FCCHRS_2 /*!< VSYNC rising edge */ +#define GFXTIM_FCC_HW_RELOAD_SRC_VSYNC_FALLING (GFXTIM_CGCR_FCCHRS_2 | GFXTIM_CGCR_FCCHRS_0) /*!< VSYNC falling edge */ +#define GFXTIM_FCC_HW_RELOAD_SRC_TE_RISING (GFXTIM_CGCR_FCCHRS_2 | GFXTIM_CGCR_FCCHRS_1) /*!< TE rising edge */ +#define GFXTIM_FCC_HW_RELOAD_SRC_TE_FALLING (GFXTIM_CGCR_FCCHRS_2 | GFXTIM_CGCR_FCCHRS_1 | GFXTIM_CGCR_FCCHRS_0) /*!< TE falling edge */ +/** + * @} + */ + +/** @defgroup GFXTIM_FCCClockSrc GFXTIM Frame CLock Counter Clock Source + * @{ + */ +#define GFXTIM_FCC_CLK_SRC_DISABLE 0U /*!< Disable */ +#define GFXTIM_FCC_CLK_SRC_LCC_UNDERFLOW GFXTIM_CGCR_FCCCS_0 /*!< Line Clock Counter underflow */ +#define GFXTIM_FCC_CLK_SRC_HSYNC_RISING GFXTIM_CGCR_FCCCS_1 /*!< HSYNC rising edge */ +#define GFXTIM_FCC_CLK_SRC_HSYNC_FALLING (GFXTIM_CGCR_FCCCS_0 | GFXTIM_CGCR_FCCCS_1) /*!< HSYNC falling edge */ +#define GFXTIM_FCC_CLK_SRC_VSYNC_RISING GFXTIM_CGCR_FCCCS_2 /*!< VSYNC rising edge */ +#define GFXTIM_FCC_CLK_SRC_VSYNC_FALLING (GFXTIM_CGCR_FCCCS_2 | GFXTIM_CGCR_FCCCS_0) /*!< VSYNC falling edge */ +#define GFXTIM_FCC_CLK_SRC_TE_RISING (GFXTIM_CGCR_FCCCS_2 | GFXTIM_CGCR_FCCCS_1) /*!< TE rising edge */ +#define GFXTIM_FCC_CLK_SRC_TE_FALLING (GFXTIM_CGCR_FCCCS_2 | GFXTIM_CGCR_FCCCS_1 | GFXTIM_CGCR_FCCCS_0) /*!< TE falling edge */ +/** + * @} + */ + +/** @defgroup GFXTIM_FrameClockSrc GFXTIM GFXTIM Frame Clock Source + * @{ + */ +#define GFXTIM_FRAME_CLK_SRC_LCC_UNDERFLOW 0U /*!< Line Clock Counter underflow */ +#define GFXTIM_FRAME_CLK_SRC_FCC_UNDERFLOW GFXTIM_CGCR_FCS_0 /*!< Frame Clock Counter underflow */ +#define GFXTIM_FRAME_CLK_SRC_HSYNC_RISING GFXTIM_CGCR_FCS_1 /*!< HSYNC rising edge */ +#define GFXTIM_FRAME_CLK_SRC_HSYNC_FALLING (GFXTIM_CGCR_FCS_0 | GFXTIM_CGCR_FCS_1) /*!< HSYNC falling edge */ +#define GFXTIM_FRAME_CLK_SRC_VSYNC_RISING GFXTIM_CGCR_FCS_2 /*!< VSYNC rising edge */ +#define GFXTIM_FRAME_CLK_SRC_VSYNC_FALLING (GFXTIM_CGCR_FCS_2 | GFXTIM_CGCR_FCS_0) /*!< VSYNC falling edge */ +#define GFXTIM_FRAME_CLK_SRC_TE_RISING (GFXTIM_CGCR_FCS_2 | GFXTIM_CGCR_FCS_1) /*!< TE rising edge */ +#define GFXTIM_FRAME_CLK_SRC_TE_FALLING (GFXTIM_CGCR_FCS_2 | GFXTIM_CGCR_FCS_1 | GFXTIM_CGCR_FCS_0) /*!< TE falling edge */ +/** + * @} + */ + +/** @defgroup GFXTIM_LineClockCalib GFXTIM Line Clock Calibration Output + * @{ + */ +#define GFXTIM_LINE_CLK_CALIB_DISABLE 0U /*!< Disable Line clock calibration */ +#define GFXTIM_LINE_CLK_CALIB_ENABLE GFXTIM_CR_LCCOE /*!< Enable Line clock calibration */ +/** + * @} + */ + +/** @defgroup GFXTIM_FrameClockCalib GFXTIM Frame Clock Calibration Output (for debug purpose) + * @{ + */ +#define GFXTIM_FRAME_CLK_CALIB_DISABLE 0U /*!< Frame clock output calibration Disable */ +#define GFXTIM_FRAME_CLK_CALIB_ENABLE GFXTIM_CR_FCCOE /*!< Frame clock output calibration Enable */ +/** + * @} + */ + +/** @defgroup GFXTIM_ClockGeneratorCounter GFXTIM Clock Generator Counter + * @{ + */ +#define GFXTIM_LINE_CLK_COUNTER GFXTIM_CGCR_LCCFR /*!< Line clock counter */ +#define GFXTIM_FRAME_CLK_COUNTER GFXTIM_CGCR_FCCFR /*!< Frame clock counter */ +/** + * @} + */ + +/** @defgroup GFXTIM_AbsoluteTime GFXTIM Absolute Time + * @{ + */ +#define GFXTIM_ABSOLUTE_GLOBAL_TIME 0x00000014U /*!< Absolute global time (frame and line) counters ATR*/ +#define GFXTIM_ABSOLUTE_FRAME_TIME 0x00000015U /*!< Absolute frame counter AFCR */ +#define GFXTIM_ABSOLUTE_LINE_TIME 0x00000016U /*!< Absolute line counter ALCR */ +/** + * @} + */ + +/** @defgroup GFXTIM_AbsoluteLineComparator GFXTIM Absolute Line Comparator + * @{ + */ +#define GFXTIM_ABSOLUTE_LINE_COMPARE1 0x1CU /*!< Absolute line compare 1 */ +#define GFXTIM_ABSOLUTE_LINE_COMPARE2 0x1DU /*!< Absolute line compare 2 */ +/** + * @} + */ + + +/** @defgroup GFXTIM_RelativeCounterMode GFXTIM Relative Frame Counter Mode + * @{ + */ +#define GFXTIM_MODE_ONE_SHOT 0U /*!< Relative Frame Counter One Shot Mode*/ +#define GFXTIM_MODE_CONTINUOUS 1U /*!< Relative Frame Counter Continuous Mode */ +/** + * @} + */ + +/** @defgroup GFXTIM_RelativeTimer GFXTIM Relative Timer + * @{ + */ +#define GFXTIM_RELATIVE_TIMER1 0U /*!< Relative Timer 1*/ +#define GFXTIM_RELATIVE_TIMER2 1U /*!< Relative Timer 2 */ +/** + * @} + */ + +/** @defgroup GFXTIM_EventLineSrc GFXTIM Event generator Line source selection + * @{ + */ +#define GFXTIM_LINE_EVENT_NONE (0U << GFXTIM_EVSR_LES1_Pos) /*!< None */ +#define GFXTIM_LINE_EVENT_ALC_OVERFLOW (1U << GFXTIM_EVSR_LES1_Pos) /*!< Absolute line counter overflow */ +#define GFXTIM_LINE_EVENT_TE (2U << GFXTIM_EVSR_LES1_Pos) /*!< Tearing effect */ +#define GFXTIM_LINE_EVENT_ALC1_COMPARE (4U << GFXTIM_EVSR_LES1_Pos) /*!< Absolute line counter 1 compare */ +#define GFXTIM_LINE_EVENT_ALC2_COMPARE (5U << GFXTIM_EVSR_LES1_Pos) /*!< Absolute line counter 2 compare */ +/** + * @} + */ + +/** @defgroup GFXTIM_EventFrameSrc GFXTIM Event generator Frame Source selection + * @{ + */ +#define GFXTIM_FRAME_EVENT_NONE (0U << GFXTIM_EVSR_FES1_Pos ) /*!< None */ +#define GFXTIM_FRAME_EVENT_AFC_OVERFLOW (1U << GFXTIM_EVSR_FES1_Pos ) /*!< Absolute frame counter overflow */ +#define GFXTIM_FRAME_EVENT_AFC_COMPARE (2U << GFXTIM_EVSR_FES1_Pos ) /*!< Absolute frame counter compare */ +#define GFXTIM_FRAME_EVENT_RFC1_RELOAD (4U << GFXTIM_EVSR_FES1_Pos ) /*!< Relative frame counter 1 reload */ +#define GFXTIM_FRAME_EVENT_RFC2_RELOAD (5U << GFXTIM_EVSR_FES1_Pos ) /*!< Relative frame counter 1 reload */ +/** + * @} + */ + +/** @defgroup GFXTIM_EventGenerator GFXTIM Event Generator ID + * @{ + */ +#define GFXTIM_EVENT_GENERATOR_1 0U /*!< Event Generator 1 */ +#define GFXTIM_EVENT_GENERATOR_2 1U /*!< Event Generator 2 */ +#define GFXTIM_EVENT_GENERATOR_3 2U /*!< Event Generator 3 */ +#define GFXTIM_EVENT_GENERATOR_4 3U /*!< Event Generator 4 */ +/** + * @} + */ + + +/** @defgroup GFXTIM_WatchdogHwReloadConfig GFXTIM Watchdog hardware reload configuration + * @{ + */ +#define GFXTIM_WATCHDOG_HW_RELOAD_DISABLE (0U << GFXTIM_WDGTCR_WDGHRC_Pos) /*!< Watchdog hardware reload is disable */ +#define GFXTIM_WATCHDOG_HW_RELOAD_RISING_EDGE (1U << GFXTIM_WDGTCR_WDGHRC_Pos) /*!< Watchdog is reload on rising edge of gfxtim_wrld */ +#define GFXTIM_WATCHDOG_HW_RELOAD_FALLING_EDGE (2U << GFXTIM_WDGTCR_WDGHRC_Pos) /*!< Watchdog is reload on falling edge of gfxtim_wrld */ +/** + * @} + */ + +/** @defgroup GFXTIM_WatchdogClockSrc GFXTIM Watchdog clock source + * @{ + */ +#define GFXTIM_WATCHDOG_CLK_SRC_LINE_CLK (0U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Line Clock */ +#define GFXTIM_WATCHDOG_CLK_SRC_FRAME_CLK (1U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Frame Clock */ +#define GFXTIM_WATCHDOG_CLK_SRC_HSYNC_RISING (2U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< HSYNC rising edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_HSYNC_FALLING (3U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< HSYNC falling edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_VSYNC_RISING (4U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< VSYNC rising edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_VSYNC_FALLING (5U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< VSYNC falling edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_TE_RISING (6U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Tearing Effect rising edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_TE_FALLING (7U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Tearing Effect falling edge */ +#define GFXTIM_WATCHDOG_CLK_SRC_EVENT_1 (8U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Event Generator 1 output */ +#define GFXTIM_WATCHDOG_CLK_SRC_EVENT_2 (9U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Event Generator 2 output */ +#define GFXTIM_WATCHDOG_CLK_SRC_EVENT_3 (10U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Event Generator 3 output */ +#define GFXTIM_WATCHDOG_CLK_SRC_EVENT_4 (11U << GFXTIM_WDGTCR_WDGCS_Pos) /*!< Event Generator 4 output */ +/** + * @} + */ + +/** @defgroup GFXTIM_Flag GFXTIM flags + * @{ + */ +#define GFXTIM_FLAG_AFCO GFXTIM_ISR_AFCOF /* Absolute Frame Counter Overflow Flag */ +#define GFXTIM_FLAG_ALCO GFXTIM_ISR_ALCOF /* Absolute Line Counter Overflow Flag */ +#define GFXTIM_FLAG_TE GFXTIM_ISR_TEF /* Tearing Effect Flag */ +#define GFXTIM_FLAG_AFCC1 GFXTIM_ISR_AFCC1F /* Absolute Frame Counter Compare 1 Flag */ +#define GFXTIM_FLAG_ALCC1 GFXTIM_ISR_ALCC1F /* Absolute Line Counter Compare 1 Flag */ +#define GFXTIM_FLAG_ALCC2 GFXTIM_ISR_ALCC2F /* Absolute Line Counter Compare 2 Flag */ +#define GFXTIM_FLAG_RFC1R GFXTIM_ISR_RFC1RF /* Relative Frame Counter 1 Reload Flag */ +#define GFXTIM_FLAG_RFC2R GFXTIM_ISR_RFC2RF /* Relative Frame Counter 2 Reload Flag */ +#define GFXTIM_FLAG_EV1 GFXTIM_ISR_EV1F /* Event 1 Flag */ +#define GFXTIM_FLAG_EV2 GFXTIM_ISR_EV2F /* Event 2 Flag */ +#define GFXTIM_FLAG_EV3 GFXTIM_ISR_EV3F /* Event 3 Flag */ +#define GFXTIM_FLAG_EV4 GFXTIM_ISR_EV4F /* Event 4 Flag */ +#define GFXTIM_FLAG_WDGA GFXTIM_ISR_WDGAF /* Watchdog Alarm Flag */ +#define GFXTIM_FLAG_WDGP GFXTIM_ISR_WDGPF /* Watchdog Pre-alarm Flag */ +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GFXTIM_Private_Macros GFXTIM Private Macros + * @{ + */ +#define IS_GFXTIM_INTERRUPT(PARAM) (((PARAM) == GFXTIM_IT_ENABLE ) || \ + ((PARAM) == GFXTIM_IT_DISABLE )) + +#define IS_GFXTIM_SYNC_SRC(PARAM) (((PARAM) == GFXTIM_SYNC_SRC_HSYNC_VSYNC_0) || \ + ((PARAM) == GFXTIM_SYNC_SRC_HSYNC_VSYNC_1) || \ + ((PARAM) == GFXTIM_SYNC_SRC_HSYNC_VSYNC_2) || \ + ((PARAM) == GFXTIM_SYNC_SRC_HSYNC_VSYNC_3)) + +#define IS_GFXTIM_TE_SRC(PARAM) (((PARAM) == GFXTIM_TE_SRC_GPIO ) || \ + ((PARAM) == GFXTIM_TE_SRC_ITE ) || \ + ((PARAM) == GFXTIM_TE_SRC_HSYNC ) || \ + ((PARAM) == GFXTIM_TE_SRC_VSYNC )) + +#define IS_GFXTIM_TE_POLARITY(PARAM) (((PARAM) == GFXTIM_TE_RISING_EDGE ) || \ + ((PARAM) == GFXTIM_TE_FALLING_EDGE )) + +#define IS_GFXTIM_LCC_HW_RELOAD_SRC(PARAM) (((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_NONE ) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_FCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_HSYNC_RISING ) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_VSYNC_RISING ) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_TE_RISING ) || \ + ((PARAM) == GFXTIM_LCC_HW_RELOAD_SRC_TE_FALLING )) + +#define IS_GFXTIM_LCC_CLK_SRC(PARAM) (((PARAM) == GFXTIM_LCC_CLK_SRC_DISABLE) || \ + ((PARAM) == GFXTIM_LCC_CLK_SRC_SYSCLOCK)) + +#define IS_GFXTIM_LINE_CLK_SRC(PARAM) (((PARAM) == GFXTIM_LINE_CLK_SRC_LCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_FCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_HSYNC_RISING ) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_VSYNC_RISING ) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_TE_RISING) || \ + ((PARAM) == GFXTIM_LINE_CLK_SRC_TE_FALLING)) + +#define IS_GFXTIM_FCC_HW_RELOAD_SRC(PARAM) (((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_NONE) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_LCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_HSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_VSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_TE_RISING) || \ + ((PARAM) == GFXTIM_FCC_HW_RELOAD_SRC_TE_FALLING)) + +#define IS_GFXTIM_FCC_CLK_SRC(PARAM) (((PARAM) == GFXTIM_FCC_CLK_SRC_DISABLE) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_LCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_HSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_VSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_TE_RISING) || \ + ((PARAM) == GFXTIM_FCC_CLK_SRC_TE_FALLING)) + +#define IS_GFXTIM_FRAME_CLK_SRC(PARAM) (((PARAM) == GFXTIM_FRAME_CLK_SRC_LCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_FCC_UNDERFLOW) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_HSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_VSYNC_RISING ) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_TE_RISING) || \ + ((PARAM) == GFXTIM_FRAME_CLK_SRC_TE_FALLING)) + +#define IS_GFXTIM_LINE_CLK_CALIB(PARAM) (((PARAM) == GFXTIM_LINE_CLK_CALIB_DISABLE) || \ + ((PARAM) == GFXTIM_LINE_CLK_CALIB_ENABLE)) + +#define IS_GFXTIM_FRAME_CLK_CALIB(PARAM) (((PARAM) == GFXTIM_FRAME_CLK_CALIB_DISABLE) || \ + ((PARAM) == GFXTIM_FRAME_CLK_CALIB_ENABLE)) + +#define IS_GFXTIM_CLOCK_GENERATOR_COUNTER(PARAM) (((PARAM) == GFXTIM_LINE_CLK_COUNTER) || \ + ((PARAM) == GFXTIM_FRAME_CLK_COUNTER) || \ + ((PARAM) == (GFXTIM_LINE_CLK_COUNTER | \ + GFXTIM_FRAME_CLK_COUNTER))) + +#define IS_GFXTIM_ABSOLUTE_TIME(PARAM) (((PARAM) == GFXTIM_ABSOLUTE_GLOBAL_TIME) || \ + ((PARAM) == GFXTIM_ABSOLUTE_FRAME_TIME) || \ + ((PARAM) == GFXTIM_ABSOLUTE_LINE_TIME)) + +#define IS_GFXTIM_ABSOLUTE_LINE_COMPARATOR(PARAM) (((PARAM) == GFXTIM_ABSOLUTE_LINE_COMPARE1) || \ + ((PARAM) == GFXTIM_ABSOLUTE_LINE_COMPARE2)) + +#define IS_GFXTIM_RELATIVE_TIMER(PARAM) (((PARAM) == GFXTIM_RELATIVE_TIMER1) || \ + ((PARAM) == GFXTIM_RELATIVE_TIMER2)) + +#define IS_GFXTIM_RELATIVE_COUNTER_MODE(PARAM) (((PARAM) == GFXTIM_MODE_ONE_SHOT) || \ + ((PARAM) == GFXTIM_MODE_CONTINUOUS)) + +#define IS_GFXTIM_EVENT_LINE(PARAM) (((PARAM) == GFXTIM_LINE_EVENT_NONE) || \ + ((PARAM) == GFXTIM_LINE_EVENT_ALC_OVERFLOW) || \ + ((PARAM) == GFXTIM_LINE_EVENT_TE) || \ + ((PARAM) == GFXTIM_LINE_EVENT_ALC1_COMPARE) || \ + ((PARAM) == GFXTIM_LINE_EVENT_ALC2_COMPARE)) + +#define IS_GFXTIM_EVENT_FRAME(PARAM) (((PARAM) == GFXTIM_FRAME_EVENT_NONE) || \ + ((PARAM) == GFXTIM_FRAME_EVENT_AFC_OVERFLOW) || \ + ((PARAM) == GFXTIM_FRAME_EVENT_AFC_COMPARE) || \ + ((PARAM) == GFXTIM_FRAME_EVENT_RFC1_RELOAD) || \ + ((PARAM) == GFXTIM_FRAME_EVENT_RFC2_RELOAD)) + +#define IS_GFXTIM_EVENT_GENERATOR(PARAM) (((PARAM) == GFXTIM_EVENT_GENERATOR_1) || \ + ((PARAM) == GFXTIM_EVENT_GENERATOR_2) || \ + ((PARAM) == GFXTIM_EVENT_GENERATOR_3) || \ + ((PARAM) == GFXTIM_EVENT_GENERATOR_4)) + + +#define IS_GFXTIM_CLOCK_GENERATOR_COUNTER_FORCE_RELOAD(PARAM) (((PARAM) == GFXTIM_LINE_CLK_COUNTER) || \ + ((PARAM) == GFXTIM_FRAME_CLK_COUNTER) || \ + ((PARAM) == (GFXTIM_LINE_CLK_COUNTER | \ + GFXTIM_FRAME_CLK_COUNTER))) + + +#define IS_GFXTIM_WATCHDOG_HW_RELOAD_CONFIG(PARAM) (((PARAM) == GFXTIM_WATCHDOG_HW_RELOAD_DISABLE) || \ + ((PARAM) == GFXTIM_WATCHDOG_HW_RELOAD_RISING_EDGE) || \ + ((PARAM) == GFXTIM_WATCHDOG_HW_RELOAD_FALLING_EDGE)) + +#define IS_GFXTIM_WATCHDOG_CLOCK_SRC(PARAM) (((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_LINE_CLK) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_FRAME_CLK) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_HSYNC_RISING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_HSYNC_FALLING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_VSYNC_RISING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_VSYNC_FALLING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_TE_RISING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_TE_FALLING) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_EVENT_1) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_EVENT_2) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_EVENT_3) || \ + ((PARAM) == GFXTIM_WATCHDOG_CLK_SRC_EVENT_4)) +#define IS_GFXTIM_WATCHDOG_VALUE(PARAM) ((PARAM) <= 65535U) +#define IS_GFXTIM_RELATIVE_FRAME_VALUE(PARAM) ((PARAM) <= 4095U) +#define IS_GFXTIM_ABSOLUTE_FRAME_VALUE(PARAM) ((PARAM) <= 1048575U) +#define IS_GFXTIM_ABSOLUTE_LINE_VALUE(PARAM) ((PARAM) <= 4095U) +#define IS_GFXTIM_LCC_RELOAD_VALUE(PARAM) ((PARAM) <= 4194303U) +#define IS_GFXTIM_FCC_RELOAD_VALUE(PARAM) ((PARAM) <= 4095U) + + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GFXTIM_Exported_Macros GFXTIM Exported Macros + * @{ + */ + +/** @brief Reset GFXTIM handle state. + * @param __HANDLE__ GFXTIM handle. + * @retval None + */ +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +#define __HAL_GFXTIM_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_GFXTIM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ +#define __HAL_GFXTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_GFXTIM_STATE_RESET) +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + + + +/** + * @brief Check whether the specified GFXTIM flag is set or not. + * @param __HANDLE__ GFXTIM handle + * @param __FLAG__ GFXTIM flag + * This parameter can be one or a combination of the following values: + * @arg @ref GFXTIM_FLAG_AFCO Absolute Frame Counter Overflow Flag + * @arg @ref GFXTIM_FLAG_ALCO Absolute Line Counter Overflow Flag + * @arg @ref GFXTIM_FLAG_TE Tearing Effect Flag + * @arg @ref GFXTIM_FLAG_AFCC1 Absolute Frame Counter Compare 1 Flag + * @arg @ref GFXTIM_FLAG_ALCC1 Absolute Line Counter Compare 1 Flag + * @arg @ref GFXTIM_FLAG_ALCC2 Absolute Line Counter Compare 2 Flag + * @arg @ref GFXTIM_FLAG_RFC1R Relative Frame Counter 1 Reload Flag + * @arg @ref GFXTIM_FLAG_RFC2R Relative Frame Counter 2 Reload Flag + * @arg @ref GFXTIM_FLAG_EV1 Event 1 Flag + * @arg @ref GFXTIM_FLAG_EV2 Event 2 Flag + * @arg @ref GFXTIM_FLAG_EV3 Event 3 Flag + * @arg @ref GFXTIM_FLAG_EV4 Event 4 Flag + * @arg @ref GFXTIM_FLAG_WDGA Watchdog Alarm Flag + * @arg @ref GFXTIM_FLAG_WDGP Watchdog Pre-alarm Flag + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_GFXTIM_GET_FLAG(__HANDLE__, __FLAG__)\ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified GFXTIM flag. + * @param __HANDLE__ GFXTIM handle + * @param __FLAG__ GFXTIM flag + * This parameter can be one or a combination of the following values: + * @arg @ref GFXTIM_FLAG_AFCO Absolute Frame Counter Overflow Flag + * @arg @ref GFXTIM_FLAG_ALCO Absolute Line Counter Overflow Flag + * @arg @ref GFXTIM_FLAG_TE Tearing Effect Flag + * @arg @ref GFXTIM_FLAG_AFCC1 Absolute Frame Counter Compare 1 Flag + * @arg @ref GFXTIM_FLAG_ALCC1 Absolute Line Counter Compare 1 Flag + * @arg @ref GFXTIM_FLAG_ALCC2 Absolute Line Counter Compare 2 Flag + * @arg @ref GFXTIM_FLAG_RFC1R Relative Frame Counter 1 Reload Flag + * @arg @ref GFXTIM_FLAG_RFC2R Relative Frame Counter 2 Reload Flag + * @arg @ref GFXTIM_FLAG_EV1 Event 1 Flag + * @arg @ref GFXTIM_FLAG_EV2 Event 2 Flag + * @arg @ref GFXTIM_FLAG_EV3 Event 3 Flag + * @arg @ref GFXTIM_FLAG_EV4 Event 4 Flag + * @arg @ref GFXTIM_FLAG_WDGA Watchdog Alarm Flag + * @arg @ref GFXTIM_FLAG_WDGP Watchdog Pre-alarm Flag + * @retval None + */ +#define __HAL_GFXTIM_CLEAR_FLAG(__HANDLE__, __FLAG__)\ + (((__HANDLE__)->Instance->ICR) = (__FLAG__)) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GFXTIM_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_Init(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_DeInit(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_MspInit(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_MspDeInit(GFXTIM_HandleTypeDef *hgfxtim); +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_GFXTIM_RegisterCallback(GFXTIM_HandleTypeDef *hgfxtim, + HAL_GFXTIM_CallbackIDTypeDef CallbackID, + pGFXTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_GFXTIM_UnRegisterCallback(GFXTIM_HandleTypeDef *hgfxtim, + HAL_GFXTIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ +void HAL_GFXTIM_TECallback(GFXTIM_HandleTypeDef *hgfxtim); +/** + * @} + */ + +/* Clock Generator functions *****************************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_ClockGenerator_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_ClockGeneratorConfigTypeDef *pClockGeneratorConfig); +HAL_StatusTypeDef HAL_GFXTIM_ClockGenerator_Reload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t ClockGeneratorCounter); +/** + * @} + */ + +/* Absolute Timer functions *****************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_AbsoluteTimerConfigTypeDef *pAbsoluteTimerConfig); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Start(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Stop(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Reset(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_GetCounter(const GFXTIM_HandleTypeDef *hgfxtim, uint32_t AbsoluteTime, + uint32_t *pValue); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_SetFrameCompare(GFXTIM_HandleTypeDef *hgfxtim, uint32_t Value); +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_SetLineCompare(GFXTIM_HandleTypeDef *hgfxtim, + uint32_t AbsoluteLineComparator, + uint32_t Value); +void HAL_GFXTIM_AbsoluteTimer_AFCC1Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_AbsoluteTimer_AFCOFCallback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_AbsoluteTimer_ALCC1Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_AbsoluteTimer_ALCC2Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_AbsoluteTimer_ALCOFCallback(GFXTIM_HandleTypeDef *hgfxtim); +/** + * @} + */ + +/* Relative Timer functions *****************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group4 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_RelativeTimerConfigTypeDef *pRelativeTimerConfig, + uint32_t RelativeTimer); +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Start(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer); +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Stop(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer); +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_ForceReload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer); +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_SetReload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer, + uint32_t Value); +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_GetCounter(const GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer, + uint32_t *pValue); +void HAL_GFXTIM_RelativeTimer_RFC1RCallback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_RelativeTimer_RFC2RCallback(GFXTIM_HandleTypeDef *hgfxtim); +/** + * @} + */ + +/* Event Generator functions *****************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group5 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Config(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator, + const GFXTIM_EventGeneratorConfigTypeDef *pEventGeneratorConfig); +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Enable(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator); +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Disable(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator); +void HAL_GFXTIM_EventGenerator_EV1Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_EventGenerator_EV2Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_EventGenerator_EV3Callback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_EventGenerator_EV4Callback(GFXTIM_HandleTypeDef *hgfxtim); +/** + * @} + */ + +/* Watchdog functions *****************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group6 + * @{ + */ +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_WatchdogConfigTypeDef *pWatchdogConfig); +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Enable(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Disable(GFXTIM_HandleTypeDef *hgfxtim); +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Refresh(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_WatchdogTimer_AlarmCallback(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_WatchdogTimer_PreAlarmCallback(GFXTIM_HandleTypeDef *hgfxtim); +/** + * @} + */ + +/* Generic functions *********************************************************/ +/** @addtogroup GFXTIM_Exported_Functions_Group7 + * @{ + */ +void HAL_GFXTIM_IRQHandler(GFXTIM_HandleTypeDef *hgfxtim); +void HAL_GFXTIM_ErrorCallback(GFXTIM_HandleTypeDef *hgfxtim); +uint32_t HAL_GFXTIM_GetError(const GFXTIM_HandleTypeDef *hgfxtim); +HAL_GFXTIM_StateTypeDef HAL_GFXTIM_GetState(const GFXTIM_HandleTypeDef *hgfxtim); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* GFXTIM */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_GFXTIM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio.h new file mode 100644 index 000000000..3a203d8a5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio.h @@ -0,0 +1,326 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_GPIO_H +#define STM32H7RSxx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_ALL ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Generate a Software interrupt on selected EXTI line(s). + * @param __EXTI_LINE__ specifies the EXTI line to be set. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 = (__EXTI_LINE__)) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_COMMON_PIN(__RESETMASK__, __SETMASK__) \ + (((uint32_t)(__RESETMASK__) & (uint32_t)(__SETMASK__)) == 0x00u) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32h7rsxx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, const GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(const GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_WriteMultipleStatePin(GPIO_TypeDef *GPIOx, uint16_t PinReset, uint16_t PinSet); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_GPIO_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio_ex.h new file mode 100644 index 000000000..8ac176f05 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpio_ex.h @@ -0,0 +1,266 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_GPIO_EX_H +#define STM32H7RSxx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ + +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_JTAG ((uint8_t)0x00) /*!< JTAG Alternate Function mapping */ +#define GPIO_AF0_SWD ((uint8_t)0x00) /*!< SWD Alternate Function mapping */ +#define GPIO_AF0_RTC ((uint8_t)0x00) /*!< RCT_OUT Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /*!< TRACE Alternate Function mapping */ +#define GPIO_AF0_PWR ((uint8_t)0x00) /*!< PWR Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_ADF1 ((uint8_t)0x01) /*!< ADF1 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /*!< LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM16 ((uint8_t)0x01) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF1_TIM17 ((uint8_t)0x01) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_GFXTIM ((uint8_t)0x02) /*!< GFXTIM Alternate Function mapping */ +#define GPIO_AF2_SAI1 ((uint8_t)0x02) /*!< SAI1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /*!< TIM5 Alternate Function mapping */ +#define GPIO_AF2_TIM12 ((uint8_t)0x02) /*!< TIM12 Alternate Function mapping */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /*!< TIM15 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_ADF1 ((uint8_t)0x03) /*!< ADF1 Alternate Function mapping */ +#define GPIO_AF3_LPTIM2 ((uint8_t)0x03) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF3_LPTIM3 ((uint8_t)0x03) /*!< LPTIM3 Alternate Function mapping */ +#define GPIO_AF3_LPTIM4 ((uint8_t)0x03) /*!< LPTIM4 Alternate Function mapping */ +#define GPIO_AF3_LPTIM5 ((uint8_t)0x03) /*!< LPTIM5 Alternate Function mapping */ +#define GPIO_AF3_LPUART1 ((uint8_t)0x03) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /*!< TIM9 Alternate Function mapping */ +#define GPIO_AF3_USART3 ((uint8_t)0x03) /*!< USART3 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_CEC ((uint8_t)0x04) /*!< CEC Alternate Function mapping */ +#define GPIO_AF4_DCMIPP ((uint8_t)0x04) /*!< DCMIPP Alternate Function mapping */ +#define GPIO_AF4_ETH ((uint8_t)0x04) /*!< ETH Alternate Function mapping */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF4_I3C1 ((uint8_t)0x04) /*!< I3C1 Alternate Function mapping */ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /*!< TIM15 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_CEC ((uint8_t)0x05) /*!< CEC Alternate Function mapping */ +#define GPIO_AF5_DCMIPP ((uint8_t)0x05) /*!< DCMIPP Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /*!< SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /*!< SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /*!< SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /*!< SPI6/I2S6 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_PSSI ((uint8_t)0x06) /*!< PSSI Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /*!< SAI1 Alternate Function mapping */ +#define GPIO_AF6_SDMMC1 ((uint8_t)0x06) /*!< SDMMC1 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /*!< SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_SPI4 ((uint8_t)0x06) /*!< SPI4 Alternate Function mapping */ +#define GPIO_AF6_UART4 ((uint8_t)0x06) /*!< UART4 Alternate Function mapping */ +#define GPIO_AF6_UCPD ((uint8_t)0x06) /*!< UCPD Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_FMC ((uint8_t)0x07) /*!< FMC Alternate Function mapping */ +#define GPIO_AF7_SDMMC1 ((uint8_t)0x07) /*!< SDMMC1 Alternate Function mapping */ +#define GPIO_AF7_SPI2 ((uint8_t)0x07) /*!< SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /*!< SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF7_SPI6 ((uint8_t)0x07) /*!< SPI6/I2S6 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /*!< USART3 Alternate Function mapping */ +#define GPIO_AF7_UART7 ((uint8_t)0x07) /*!< UART7 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_GFXTIM ((uint8_t)0x08) /*!< GFXTIM Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /*!< LPUART1 Alternate Function mapping */ +#define GPIO_AF8_PSSI ((uint8_t)0x08) /*!< PSSI Alternate Function mapping */ +#define GPIO_AF8_SAI2 ((uint8_t)0x08) /*!< SAI2 Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /*!< SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /*!< SPDIFRX Alternate Function mapping */ +#define GPIO_AF8_SPI6 ((uint8_t)0x08) /*!< SPI6/I2S6 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /*!< UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /*!< UART5 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /*!< UART8 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_FDCAN1 ((uint8_t)0x09) /*!< FDCAN1 Alternate Function mapping */ +#define GPIO_AF9_FDCAN2 ((uint8_t)0x09) /*!< FDCAN2 Alternate Function mapping */ +#define GPIO_AF9_FMC ((uint8_t)0x09) /*!< FMC Alternate Function mapping */ +#define GPIO_AF9_XSPIM_P1 ((uint8_t)0x09) /*!< XSPIM Manager Port 1 Alternate Function mapping */ +#define GPIO_AF9_XSPIM_P2 ((uint8_t)0x09) /*!< XSPIM Manager Port 2 Alternate Function mapping */ +#define GPIO_AF9_PSSI ((uint8_t)0x09) /*!< PSSI Alternate Function mapping */ +#define GPIO_AF9_SDMMC2 ((uint8_t)0x09) /*!< SDMMC2 Alternate Function mapping */ +#define GPIO_AF9_SPDIFRX ((uint8_t)0x09) /*!< SPDIFRX Alternate Function mapping */ +#define GPIO_AF9_SPI5 ((uint8_t)0x09) /*!< SPI5 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /*!< TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /*!< TIM14 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_CRS ((uint8_t)0x0A) /*!< CRS Alternate Function mapping */ +#define GPIO_AF10_FMC ((uint8_t)0x0A) /*!< FMC Alternate Function mapping */ +#define GPIO_AF10_LTDC ((uint8_t)0x0A) /*!< LTDC Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /*!< OTG FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /*!< OTG HS Alternate Function mapping */ +#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /*!< SAI2 Alternate Function mapping */ +#define GPIO_AF10_SDMMC2 ((uint8_t)0x0A) /*!< SDMMC2 Alternate Function mapping */ +#define GPIO_AF10_SPI1 ((uint8_t)0x0A) /*!< SPI1/I2S1 Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /*!< ETH Alternate Function mapping */ +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /*!< LTDC Alternate Function mapping */ +#define GPIO_AF11_MDIOS ((uint8_t)0x0B) /*!< MDIOS Alternate Function mapping */ +#define GPIO_AF11_SDMMC1 ((uint8_t)0x0B) /*!< SDMMC1 Alternate Function mapping */ +#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /*!< SDMMC2 Alternate Function mapping */ +#define GPIO_AF11_UART7 ((uint8_t)0x0B) /*!< UART7 Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /*!< FMC Alternate Function mapping */ +#define GPIO_AF12_GFXTIM ((uint8_t)0x0C) /*!< GFXTIM Alternate Function mapping */ +#define GPIO_AF12_LTDC ((uint8_t)0x0C) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /*!< SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMIPP ((uint8_t)0x0D) /*!< DCMIPP Alternate Function mapping */ +#define GPIO_AF13_GFXTIM ((uint8_t)0x0D) /*!< GFXTIM Alternate Function mapping */ +#define GPIO_AF13_LTDC ((uint8_t)0x0D) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_FMC ((uint8_t)0x0E) /*!< FMC Alternate Function mapping */ +#define GPIO_AF14_LTDC ((uint8_t)0x0E) /*!< LTDC Alternate Function mapping */ +#define GPIO_AF14_MDIOS ((uint8_t)0x0E) /*!< MDIOS Alternate Function mapping */ +#define GPIO_AF14_PSSI ((uint8_t)0x0E) /*!< PSSI Alternate Function mapping */ +#define GPIO_AF14_TIM1 ((uint8_t)0x0E) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF14_UART5 ((uint8_t)0x0E) /*!< UART5 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index + * @{ + */ +#define GPIO_GET_INDEX(__GPIOx__) (((uint32_t )(__GPIOx__) & (~GPIOA_BASE)) >> 10) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_GPIO_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpu2d.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpu2d.h new file mode 100644 index 000000000..a039881d3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_gpu2d.h @@ -0,0 +1,321 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gpu2d.h + * @author MCD Application Team + * @brief Header file of GPU2D HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_GPU2D_H +#define STM32H7RSxx_HAL_GPU2D_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (GPU2D) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup GPU2D GPU2D + * @brief GPU2D HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GPU2D_Exported_Types GPU2D Exported Types + * @{ + */ +/** + * @brief HAL GPU2D State enumeration definition + */ +typedef enum +{ + HAL_GPU2D_STATE_RESET = 0x00U, /*!< GPU2D not yet initialized or disabled */ + HAL_GPU2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_GPU2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_GPU2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_GPU2D_STATE_ERROR = 0x04U +} HAL_GPU2D_StateTypeDef; + +/** + * @brief GPU2D_TypeDef definition + */ +typedef uint32_t GPU2D_TypeDef; + +/** + * @brief GPU2D handle Structure definition + */ +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +typedef struct __GPU2D_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ +{ + GPU2D_TypeDef Instance; /*!< GPU2D register base address. */ + + HAL_LockTypeDef Lock; /*!< GPU2D lock. */ + + __IO HAL_GPU2D_StateTypeDef State; /*!< GPU2D transfer state. */ + + __IO uint32_t ErrorCode; /*!< GPU2D error code. */ + +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + void (* CommandListCpltCallback)(struct __GPU2D_HandleTypeDef *hgpu2d, uint32_t CmdListID); /*!< GPU2D Command Complete Callback */ + + void (* MspInitCallback)(struct __GPU2D_HandleTypeDef *hgpu2d); /*!< GPU2D Msp Init callback */ + + void (* MspDeInitCallback)(struct __GPU2D_HandleTypeDef *hgpu2d); /*!< GPU2D Msp DeInit callback */ +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ +} GPU2D_HandleTypeDef; + +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +/** + * @brief HAL GPU2D Callback ID enumeration definition + */ +typedef enum +{ + HAL_GPU2D_MSPINIT_CB_ID = 0x00U, /*!< GPU2D MspInit callback ID */ + HAL_GPU2D_MSPDEINIT_CB_ID = 0x01U, /*!< GPU2D MspDeInit callback ID */ +} HAL_GPU2D_CallbackIDTypeDef; + +/** @defgroup HAL_GPU2D_Callback_pointer_definition HAL GPU2D Callback pointer definition + * @brief HAL GPU2D Callback pointer definition + * @{ + */ +typedef void (*pGPU2D_CallbackTypeDef)(GPU2D_HandleTypeDef *hgpu2d); /*!< pointer to an GPU2D Callback function */ +typedef void (*pGPU2D_CommandListCpltCallbackTypeDef)(GPU2D_HandleTypeDef *hgpu2d, uint32_t CmdID); /*!< pointer to an GPU2D Command List Complete Callback function */ +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPU2D_Exported_Constants GPU2D Exported Constants + * @{ + */ + +/** @defgroup GPU2D_Error_Code_definition GPU2D Error Code definition + * @brief GPU2D Error Code definition + * @{ + */ +#define HAL_GPU2D_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_GPU2D_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +#define HAL_GPU2D_ERROR_INVALID_CALLBACK (0x00000002U) /*!< Invalid callback error */ +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ +/** + * @} + */ + +/** @defgroup GPU2D_Interrupt_configuration_definition GPU2D Interrupt configuration definition + * @brief GPU2D Interrupt definition + * @{ + */ +#define GPU2D_IT_CLC 0x00000001U /*!< Command List Complete Interrupt */ +/** + * @} + */ + +/** @defgroup GPU2D_Flag_definition GPU2D Flag definition + * @brief GPU2D Flags definition + * @{ + */ +#define GPU2D_FLAG_CLC 0x00000001U /*!< Command List Complete Interrupt Flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup GPU2D_Exported_Macros GPU2D Exported Macros + * @{ + */ + +/** @brief Reset GPU2D handle state + * @param __HANDLE__: specifies the GPU2D handle. + * @retval None + */ +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +#define __HAL_GPU2D_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_GPU2D_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + (__HANDLE__)->CommandListCpltCallback = NULL; \ + } while(0) +#else /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 0 */ +#define __HAL_GPU2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_GPU2D_STATE_RESET) +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + +/* Interrupt & Flag management */ +/** + * @brief Get the GPU2D pending flags. + * @param __HANDLE__: GPU2D handle + * @param __FLAG__: flag to check. + * This parameter can be one of the following values: + * @arg GPU2D_FLAG_CLC: Command List Complete interrupt mask + * @retval The state of FLAG. + */ +#define __HAL_GPU2D_GET_FLAG(__HANDLE__, __FLAG__) (READ_REG(*(__IO uint32_t *)((uint32_t)(__HANDLE__)->Instance\ + + GPU2D_ITCTRL)) & (__FLAG__)) + +/** + * @brief Clear the GPU2D pending flags. + * @param __HANDLE__: GPU2D handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg GPU2D_FLAG_CLC: Command List Complete interrupt mask + * @retval None + */ +#define __HAL_GPU2D_CLEAR_FLAG(__HANDLE__, __FLAG__) do { \ + __IO uint32_t *tmpreg = \ + (__IO uint32_t *)((uint32_t)(__HANDLE__)->Instance\ + + GPU2D_ITCTRL); \ + CLEAR_BIT(*tmpreg, __FLAG__); \ + } while(0U) + +/** + * @brief Check whether the specified GPU2D interrupt source is enabled or not. + * @param __HANDLE__: GPU2D handle + * @param __INTERRUPT__: specifies the GPU2D interrupt source to check. + * This parameter can be one of the following values: + * @arg GPU2D_IT_CLC: Command List Complete interrupt mask + * @retval The state of INTERRUPT source. + */ +#define __HAL_GPU2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_REG(*(__IO uint32_t *)\ + ((uint32_t)(__HANDLE__)->Instance\ + + GPU2D_ITCTRL)) & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPU2D_Exported_Functions GPU2D Exported Functions + * @{ + */ + +/** @addtogroup GPU2D_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +HAL_StatusTypeDef HAL_GPU2D_Init(GPU2D_HandleTypeDef *hgpu2d); +HAL_StatusTypeDef HAL_GPU2D_DeInit(GPU2D_HandleTypeDef *hgpu2d); +void HAL_GPU2D_MspInit(GPU2D_HandleTypeDef *hgpu2d); +void HAL_GPU2D_MspDeInit(GPU2D_HandleTypeDef *hgpu2d); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_GPU2D_RegisterCallback(GPU2D_HandleTypeDef *hgpu2d, HAL_GPU2D_CallbackIDTypeDef CallbackID, + pGPU2D_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_GPU2D_UnRegisterCallback(GPU2D_HandleTypeDef *hgpu2d, HAL_GPU2D_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_GPU2D_RegisterCommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d, + pGPU2D_CommandListCpltCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_GPU2D_UnRegisterCommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d); +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + +/** + * @} + */ + + +/** @addtogroup GPU2D_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +uint32_t HAL_GPU2D_ReadRegister(const GPU2D_HandleTypeDef *hgpu2d, uint32_t offset); +HAL_StatusTypeDef HAL_GPU2D_WriteRegister(GPU2D_HandleTypeDef *hgpu2d, uint32_t offset, uint32_t value); +void HAL_GPU2D_IRQHandler(GPU2D_HandleTypeDef *hgpu2d); +void HAL_GPU2D_ER_IRQHandler(GPU2D_HandleTypeDef *hgpu2d); +void HAL_GPU2D_CommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d, uint32_t CmdListID); +void HAL_GPU2D_ErrorCallback(GPU2D_HandleTypeDef *hgpu2d); + +/** + * @} + */ + +/** @addtogroup GPU2D_Exported_Functions_Group3 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State functions ***************************************************/ +HAL_GPU2D_StateTypeDef HAL_GPU2D_GetState(GPU2D_HandleTypeDef const *const hgpu2d); +uint32_t HAL_GPU2D_GetError(GPU2D_HandleTypeDef const *const hgpu2d); + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ + +/** @addtogroup GPU2D_Private_Constants GPU2D Private Constants + * @{ + */ + +#define GPU2D_ITCTRL (0x0F8U) /*!< GPU2D Interrupt Control Register Offset */ +#define GPU2D_CLID (0x148U) /*!< GPU2D Last Command List Identifier Register Offset */ +#define GPU2D_BREAKPOINT (0x080U) /*!< GPU2D Breakpoint Register Offset */ +#define GPU2D_SYS_INTERRUPT (0xff8U) /*!< GPU2D System Interrupt Register Offset */ + +/** @defgroup GPU2D_Offset GPU2D Last Register Offset + * @{ + */ +#define GPU2D_OFFSET 0x1000U /*!< Last GPU2D Register Offset */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPU2D_Private_Macros GPU2D Private Macros + * @{ + */ +#define IS_GPU2D_OFFSET(OFFSET) ((OFFSET) < GPU2D_OFFSET) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPU2D) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_GPU2D_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hash.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hash.h new file mode 100644 index 000000000..32b1633a1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hash.h @@ -0,0 +1,579 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_hash.h + * @author MCD Application Team + * @brief Header file of HASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_HASH_H +#define STM32H7RSxx_HAL_HASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (HASH) +/** @defgroup HASH HASH + * @brief HASH HAL module driver. + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HASH_Exported_Types HASH Exported Types + * @{ + */ + +/** + * @brief HASH Configuration Structure definition + */ +typedef struct +{ + uint32_t DataType; /*!< no swap (32-bit data), half word swap (16-bit data), byte swap (8-bit data) or bit swap + (1-bit data). This parameter can be a value of @ref HASH_Data_Type. */ + + uint32_t KeySize; /*!< The key size is used only in HMAC operation. */ + + uint8_t *pKey; /*!< The key is used only in HMAC operation. */ + + uint32_t Algorithm; /*!< HASH algorithm MD5, SHA1 or SHA2. + This parameter can be a value of @ref HASH_Algorithm_Selection */ + + +} HASH_ConfigTypeDef; + +/** + * @brief HAL State structure definition + */ +typedef enum +{ + HAL_HASH_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ + HAL_HASH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_HASH_STATE_BUSY = 0x02U, /*!< Processing (hashing) is ongoing */ + HAL_HASH_STATE_SUSPENDED = 0x03U /*!< Suspended state */ +} HAL_HASH_StateTypeDef; + +/** + * @brief HAL phase structure definition + */ +typedef enum +{ + HAL_HASH_PHASE_READY = 0x01U, /*!< HASH peripheral is ready to start */ + HAL_HASH_PHASE_PROCESS = 0x02U, /*!< HASH peripheral is in HASH processing phase */ + HAL_HASH_PHASE_HMAC_STEP_1 = 0x03U, /*!< HASH peripheral is in HMAC step 1 processing phase + (step 1 consists in entering the inner hash function key)*/ + HAL_HASH_PHASE_HMAC_STEP_2 = 0x04U, /*!< HASH peripheral is in HMAC step 2 processing phase + (step 2 consists in entering the message text) */ + HAL_HASH_PHASE_HMAC_STEP_3 = 0x05U /*!< HASH peripheral is in HMAC step 3 processing phase + (step 3 consists in entering the outer hash function key)*/ + +} HAL_HASH_PhaseTypeDef; + +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) +/** + * @brief HAL HASH mode suspend definitions + */ +typedef enum +{ + HAL_HASH_SUSPEND_NONE = 0x00U, /*!< HASH peripheral suspension not requested */ + HAL_HASH_SUSPEND = 0x01U /*!< HASH peripheral suspension is requested */ +} HAL_HASH_SuspendTypeDef; +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + + +/** + * @brief HASH Handle Structure definition + */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) +typedef struct __HASH_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ +{ + HASH_TypeDef *Instance; /*!< HASH Register base address */ + + HASH_ConfigTypeDef Init; /*!< HASH required parameters */ + + uint8_t const *pHashInBuffPtr; /*!< Pointer to input buffer */ + + uint8_t *pHashOutBuffPtr; /*!< Pointer to output buffer (digest) */ + + __IO uint32_t HashInCount; /*!< Counter of inputted data */ + + uint32_t Size; /*!< Size of buffer to be processed in bytes */ + + uint8_t *pHashKeyBuffPtr; /*!< Pointer to key buffer (HMAC only) */ + + HAL_HASH_PhaseTypeDef Phase; /*!< HASH peripheral phase */ + + DMA_HandleTypeDef *hdmain; /*!< HASH In DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO uint32_t ErrorCode; /*!< HASH Error code */ + + __IO HAL_HASH_StateTypeDef State; /*!< HASH peripheral state */ + + __IO uint32_t Accumulation; /*!< HASH multi buffers accumulation flag */ + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + void (* InCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH input completion callback */ + + void (* DgstCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH digest computation complete callback */ + + void (* ErrorCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH error callback */ + + void (* MspInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp Init callback */ + + void (* MspDeInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp DeInit callback */ + +#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + __IO HAL_HASH_SuspendTypeDef SuspendRequest; /*!< HASH peripheral suspension request flag */ + + HASH_ConfigTypeDef Init_saved; /*!< Saved HASH required parameters */ + + uint8_t const *pHashInBuffPtr_saved; /*!< Saved pointer to input buffer */ + + uint8_t *pHashOutBuffPtr_saved; /*!< Saved pointer to output buffer (digest) */ + + __IO uint32_t HashInCount_saved; /*!< Saved counter of inputted data */ + + uint32_t Size_saved; /*!< Saved size of buffer to be processed */ + + uint8_t *pHashKeyBuffPtr_saved; /*!< Saved pointer to key buffer (HMAC only) */ + + HAL_HASH_PhaseTypeDef Phase_saved; /*!< Saved HASH peripheral phase */ +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + +} HASH_HandleTypeDef; + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL HASH common Callback ID enumeration definition + */ +typedef enum +{ + HAL_HASH_MSPINIT_CB_ID = 0x00U, /*!< HASH MspInit callback ID */ + HAL_HASH_MSPDEINIT_CB_ID = 0x01U, /*!< HASH MspDeInit callback ID */ + HAL_HASH_INPUTCPLT_CB_ID = 0x02U, /*!< HASH input completion callback ID */ + HAL_HASH_DGSTCPLT_CB_ID = 0x03U, /*!< HASH digest computation completion callback ID */ + HAL_HASH_ERROR_CB_ID = 0x04U, /*!< HASH error callback ID */ +} HAL_HASH_CallbackIDTypeDef; + +/** + * @brief HAL HASH Callback pointer definition + */ +typedef void (*pHASH_CallbackTypeDef)(HASH_HandleTypeDef *hhash); /*!< pointer to a HASH common callback functions */ + +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HASH_Exported_Constants HASH Exported Constants + * @{ + */ + +/** @defgroup HASH_Error_Definition HASH Error Definition + * @{ + */ +#define HAL_HASH_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_HASH_ERROR_BUSY 0x00000001U /*!< Busy flag error */ +#define HAL_HASH_ERROR_DMA 0x00000002U /*!< DMA-based process error */ +#define HAL_HASH_ERROR_TIMEOUT 0x00000004U /*!< Timeout error */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) +#define HAL_HASH_ERROR_INVALID_CALLBACK 0x00000010U /*!< Invalid Callback error */ +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup HASH_Algorithm_Selection HASH algorithm selection + * @{ + */ +#define HASH_ALGOSELECTION_SHA1 0x00000000U /*!< HASH function is SHA1 */ +#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */ +#define HASH_ALGOSELECTION_SHA256 (HASH_CR_ALGO_0 | HASH_CR_ALGO_1) /*!< HASH function is SHA256 */ +#define HASH_ALGOSELECTION_SHA384 (HASH_CR_ALGO_2 | HASH_CR_ALGO_3) /*!< HASH function is SHA384 */ +#define HASH_ALGOSELECTION_SHA512_224 (HASH_CR_ALGO_0 | HASH_CR_ALGO_2 | HASH_CR_ALGO_3) +/*!< HASH function is SHA512_224 */ +#define HASH_ALGOSELECTION_SHA512_256 (HASH_CR_ALGO_1 | HASH_CR_ALGO_2 | HASH_CR_ALGO_3) +/*!< HASH function is SHA512_256 */ +#define HASH_ALGOSELECTION_SHA512 HASH_CR_ALGO /*!< HASH function is SHA512 */ +/** + * @} + */ + +/** @defgroup HASH_Mode HASH Mode + * @{ + */ +#define HASH_ALGOMODE_HASH 0x00000000U /*!< HASH mode */ +#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< HMAC mode */ +/** + * @} + */ + +/** @defgroup HASH_Data_Type HASH Data Type + * @{ + */ +#define HASH_NO_SWAP 0x00000000U /*!< 32-bit data. No swapping */ +#define HASH_HALFWORD_SWAP HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */ +#define HASH_BYTE_SWAP HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */ +#define HASH_BIT_SWAP HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */ +/** + * @} + */ + +/** @defgroup HASH_HMAC_KEY key length only for HMAC mode + * @{ + */ +#define HASH_SHORTKEY 0x00000000U /*!< HMAC Key size is <= block size (64 or 128 bytes) */ +#define HASH_LONGKEY HASH_CR_LKEY /*!< HMAC Key size is > block size (64 or 128 bytes) */ +/** + * @} + */ + +/** @defgroup HASH_flags_definition HASH flags definitions + * @{ + */ +#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : new block can be entered + in the Peripheral */ +#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */ +#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */ +#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy, processing a block of data */ +#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : input buffer contains at least one word of data*/ +/** + * @} + */ + +/** @defgroup HASH_interrupts_definition HASH interrupts definitions + * @{ + */ +#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */ +#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HASH_Exported_Macros HASH Exported Macros + * @{ + */ + +/** @brief Check whether or not the specified HASH flag is set. + * @param __HANDLE__ specifies the HASH handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer. + * @arg @ref HASH_FLAG_DCIS Digest calculation complete. + * @arg @ref HASH_FLAG_DMAS DMA interface is enabled (DMAE=1) or a transfer is ongoing. + * @arg @ref HASH_FLAG_BUSY The hash core is Busy : processing a block of data. + * @arg @ref HASH_FLAG_DINNE DIN not empty : the input buffer contains at least one word of data. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_HASH_GET_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) > 8U) ? \ + (((__HANDLE__)->Instance->CR & (__FLAG__)) == (__FLAG__)) :\ + (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) ) + +/** @brief Clear the specified HASH flag. + * @param __HANDLE__ specifies the HASH handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer. + * @arg @ref HASH_FLAG_DCIS Digest calculation complete + * @retval None + */ +#define __HAL_HASH_CLEAR_FLAG(__HANDLE__, __FLAG__) CLEAR_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) + +/** @brief Check whether the specified HASH interrupt source is enabled or not. + * @param __HANDLE__ specifies the HASH handle. + * @param __INTERRUPT__ HASH interrupt source to check + * This parameter can be one of the following values : + * @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN) + * @arg @ref HASH_IT_DCI Digest calculation complete + * @retval State of interruption (TRUE or FALSE). + */ +#define __HAL_HASH_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Enable the specified HASH interrupt. + * @param __HANDLE__ specifies the HASH handle. + * @param __INTERRUPT__ specifies the HASH interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN) + * @arg @ref HASH_IT_DCI Digest calculation complete + * @retval None + */ +#define __HAL_HASH_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->IMR, (__INTERRUPT__)) + +/** @brief Disable the specified HASH interrupt. + * @param __HANDLE__ specifies the HASH handle. + * @param __INTERRUPT__ specifies the HASH interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN) + * @arg @ref HASH_IT_DCI Digest calculation complete + * @retval None + */ +#define __HAL_HASH_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->IMR, (__INTERRUPT__)) + +/** @brief Reset HASH handle state. + * @param __HANDLE__ HASH handle. + * @retval None + */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) +#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_HASH_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + }while(0) +#else +#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET) +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + +/** + * @brief Enable the multi-buffer DMA transfer mode. + * @note This bit is set when hashing large files when multiple DMA transfers are needed. + * @retval None + */ +#define __HAL_HASH_SET_MDMAT() SET_BIT(HASH->CR, HASH_CR_MDMAT) + +/** + * @brief Disable the multi-buffer DMA transfer mode. + * @retval None + */ +#define __HAL_HASH_RESET_MDMAT() CLEAR_BIT(HASH->CR, HASH_CR_MDMAT) + +/** + * @brief HAL HASH driver version. + * @retval None + */ +#define HAL_HASH_VERSION 200 /*!< HAL HASH driver version 2.0.0*/ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HASH_Exported_Functions HASH Exported Functions + * @{ + */ + +/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash); +HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash); +void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash); +void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash); +HAL_StatusTypeDef HAL_HASH_GetConfig(HASH_HandleTypeDef *hhash, HASH_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_HASH_SetConfig(HASH_HandleTypeDef *hhash, HASH_ConfigTypeDef *pConf); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID, + pHASH_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + +HAL_StatusTypeDef HAL_HASH_ProcessSuspend(HASH_HandleTypeDef *hhash); +void HAL_HASH_Resume(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer); +void HAL_HASH_Suspend(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer); +/** + * @} + */ + +/** @addtogroup HASH_Exported_Functions_Group2 HASH processing functions + * @{ + */ + +HAL_StatusTypeDef HAL_HASH_Start(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, + uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_Start_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer); +HAL_StatusTypeDef HAL_HASH_Start_DMA(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer); + +HAL_StatusTypeDef HAL_HASH_Accumulate(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_AccumulateLast(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, + uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_AccumulateLast_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer); +HAL_StatusTypeDef HAL_HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size); + +/** + * @} + */ + +/** @addtogroup HASH_Exported_Functions_Group3 HMAC processing functions + * @{ + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Start(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, + uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_HMAC_Start_DMA(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer); +HAL_StatusTypeDef HAL_HASH_HMAC_Start_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer); + +HAL_StatusTypeDef HAL_HASH_HMAC_Accumulate(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_HMAC_AccumulateLast(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, uint32_t Timeout); +HAL_StatusTypeDef HAL_HASH_HMAC_Accumulate_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size); +HAL_StatusTypeDef HAL_HASH_HMAC_AccumulateLast_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, + uint32_t Size, uint8_t *const pOutBuffer); + +/** + * @} + */ + +/** @addtogroup HASH_Exported_Functions_Group4 HASH IRQ handler management + * @{ + */ +void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash); +void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash); +void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash); +void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash); +HAL_HASH_StateTypeDef HAL_HASH_GetState(const HASH_HandleTypeDef *hhash); +uint32_t HAL_HASH_GetError(const HASH_HandleTypeDef *hhash); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup HASH_Private_Macros HASH Private Macros + * @{ + */ + +/** + * @brief Return digest length in bytes. + * @retval Digest length + */ +#define HASH_DIGEST_LENGTH(__HANDLE__) (((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA1) ? 20U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA224) ? 28U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA256) ? 32U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA384) ? 48U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA512_224) ? 28U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA512_256) ? 32U : \ + ((READ_BIT((__HANDLE__)->Instance->CR, HASH_CR_ALGO) \ + == HASH_ALGOSELECTION_SHA512) ? 64U : 20U ) ) )))))) + +/** + * @brief Ensure that HASH input data type is valid. + * @param __DATATYPE__ HASH input data type. + * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid) + */ +#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_NO_SWAP)|| \ + ((__DATATYPE__) == HASH_HALFWORD_SWAP)|| \ + ((__DATATYPE__) == HASH_BYTE_SWAP) || \ + ((__DATATYPE__) == HASH_BIT_SWAP)) + +/** + * @brief Ensure that HASH input algorithm is valid. + * @param __ALGORITHM__ HASH algorithm. + * @retval SET (__ALGORITHM__ is valid) or RESET (__ALGORITHM__ is invalid) + */ +#define IS_HASH_ALGORITHM(__ALGORITHM__) (((__ALGORITHM__) == HASH_ALGOSELECTION_SHA1)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA224)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA256)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA384)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA512_224)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA512_256)|| \ + ((__ALGORITHM__) == HASH_ALGOSELECTION_SHA512)) + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup HASH_Private_Constants HASH Private Constants + * @{ + */ + +/** + * @} + */ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup HASH_Private_Defines HASH Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup HASH_Private_Variables HASH Private Variables + * @{ + */ + +/** + * @} + */ +/* Private functions -----------------------------------------------------------*/ + +/** @addtogroup HASH_Private_Functions HASH Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* HASH*/ +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_HASH_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hcd.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hcd.h new file mode 100644 index 000000000..8af664fb1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_hcd.h @@ -0,0 +1,327 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_hcd.h + * @author MCD Application Team + * @brief Header file of HCD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_HCD_H +#define STM32H7RSxx_HAL_HCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_usb.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup HCD HCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HCD_Exported_Types HCD Exported Types + * @{ + */ + +/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition + * @{ + */ +typedef enum +{ + HAL_HCD_STATE_RESET = 0x00, + HAL_HCD_STATE_READY = 0x01, + HAL_HCD_STATE_ERROR = 0x02, + HAL_HCD_STATE_BUSY = 0x03, + HAL_HCD_STATE_TIMEOUT = 0x04 +} HCD_StateTypeDef; + +typedef USB_OTG_GlobalTypeDef HCD_TypeDef; +typedef USB_OTG_CfgTypeDef HCD_InitTypeDef; +typedef USB_OTG_HCTypeDef HCD_HCTypeDef; +typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef; +typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef; +/** + * @} + */ + +/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition + * @{ + */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +typedef struct __HCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +{ + HCD_TypeDef *Instance; /*!< Register base address */ + HCD_InitTypeDef Init; /*!< HCD required parameters */ + HCD_HCTypeDef hc[16]; /*!< Host channels parameters */ + HAL_LockTypeDef Lock; /*!< HCD peripheral status */ + __IO HCD_StateTypeDef State; /*!< HCD communication state */ + __IO uint32_t ErrorCode; /*!< HCD Error code */ + void *pData; /*!< Pointer Stack Handler */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD SOF callback */ + void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Connect callback */ + void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Disconnect callback */ + void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Enable callback */ + void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Disable callback */ + void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum, + HCD_URBStateTypeDef urb_state); /*!< USB OTG HCD Host Channel Notify URB Change callback */ + + void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp Init callback */ + void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp DeInit callback */ +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +} HCD_HandleTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HCD_Exported_Constants HCD Exported Constants + * @{ + */ + +/** @defgroup HCD_Speed HCD Speed + * @{ + */ +#define HCD_SPEED_HIGH USBH_HS_SPEED +#define HCD_SPEED_FULL USBH_FSLS_SPEED +#define HCD_SPEED_LOW USBH_FSLS_SPEED +/** + * @} + */ + +/** @defgroup HCD_Device_Speed HCD Device Speed + * @{ + */ +#define HCD_DEVICE_SPEED_HIGH 0U +#define HCD_DEVICE_SPEED_FULL 1U +#define HCD_DEVICE_SPEED_LOW 2U +/** + * @} + */ + +/** @defgroup HCD_PHY_Module HCD PHY Module + * @{ + */ +#define HCD_PHY_ULPI 1U +#define HCD_PHY_EMBEDDED 2U +/** + * @} + */ + +/** @defgroup HCD_Error_Code_definition HCD Error Code definition + * @brief HCD Error Code definition + * @{ + */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +#define HAL_HCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HCD_Exported_Macros HCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +#define __HAL_HCD_GET_CH_FLAG(__HANDLE__, __chnum__, __INTERRUPT__) \ + ((USB_ReadChInterrupts((__HANDLE__)->Instance, (__chnum__)) & (__INTERRUPT__)) == (__INTERRUPT__)) + +#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) +#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__)) +#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM) +#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM) +#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM) +#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM) +#define __HAL_HCD_SET_HC_CSPLT(chnum) (USBx_HC(chnum)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT) +#define __HAL_HCD_CLEAR_HC_CSPLT(chnum) (USBx_HC(chnum)->HCSPLT &= ~USB_OTG_HCSPLT_COMPLSPLT) +#define __HAL_HCD_CLEAR_HC_SSPLT(chnum) (USBx_HC(chnum)->HCSPLT &= ~USB_OTG_HCSPLT_SPLITEN) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup HCD_Exported_Functions HCD Exported Functions + * @{ + */ + +/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, + uint8_t speed, uint8_t ep_type, uint16_t mps); + +HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num); +void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd); +void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd); + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition + * @brief HAL USB OTG HCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_HCD_SOF_CB_ID = 0x01, /*!< USB HCD SOF callback ID */ + HAL_HCD_CONNECT_CB_ID = 0x02, /*!< USB HCD Connect callback ID */ + HAL_HCD_DISCONNECT_CB_ID = 0x03, /*!< USB HCD Disconnect callback ID */ + HAL_HCD_PORT_ENABLED_CB_ID = 0x04, /*!< USB HCD Port Enable callback ID */ + HAL_HCD_PORT_DISABLED_CB_ID = 0x05, /*!< USB HCD Port Disable callback ID */ + + HAL_HCD_MSPINIT_CB_ID = 0x06, /*!< USB HCD MspInit callback ID */ + HAL_HCD_MSPDEINIT_CB_ID = 0x07 /*!< USB HCD MspDeInit callback ID */ + +} HAL_HCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition + * @brief HAL USB OTG HCD Callback pointer definition + * @{ + */ + +typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd); /*!< pointer to a common USB OTG HCD callback function */ +typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd, + uint8_t epnum, + HCD_URBStateTypeDef urb_state); /*!< pointer to USB OTG HCD host channel callback */ +/** + * @} + */ + +HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID, + pHCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, + pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t direction, uint8_t ep_type, + uint8_t token, uint8_t *pbuff, + uint16_t length, uint8_t do_ping); + +HAL_StatusTypeDef HAL_HCD_HC_SetHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t addr, uint8_t PortNbr); + +HAL_StatusTypeDef HAL_HCD_HC_ClearHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num); + +/* Non-Blocking mode: Interrupt */ +void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd); +void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd); +void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, + HCD_URBStateTypeDef urb_state); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd); +HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef const *hhcd); +HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef const *hhcd, uint8_t chnum); +HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef const *hhcd, uint8_t chnum); +uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef const *hhcd, uint8_t chnum); +uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd); +uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd); + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HCD_Private_Macros HCD Private Macros + * @{ + */ +/** + * @} + */ +/* Private functions prototypes ----------------------------------------------*/ + +/** + * @} + */ +/** + * @} + */ +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_HCD_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c.h new file mode 100644 index 000000000..bb4281b08 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c.h @@ -0,0 +1,842 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_I2C_H +#define STM32H7RSxx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + +#endif /*HAL_DMA_MODULE_ENABLED*/ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32h7rsxx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +#if defined(HAL_DMA_MODULE_ENABLED) +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +#endif /*HAL_DMA_MODULE_ENABLED*/ +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32h7rsxx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_I2C_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c_ex.h new file mode 100644 index 000000000..2a4ccc9ce --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2c_ex.h @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_I2C_EX_H +#define STM32H7RSxx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FASTMODEPLUS_ENABLE 0x00000000U /*!< Enable Fast Mode Plus */ +#define I2C_FASTMODEPLUS_DISABLE 0x00000001U /*!< Disable Fast Mode Plus */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigFastModePlus(I2C_HandleTypeDef *hi2c, uint32_t FastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) (((__CONFIG__) == (I2C_FASTMODEPLUS_ENABLE)) || \ + ((__CONFIG__) == (I2C_FASTMODEPLUS_DISABLE))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32h7rsxx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_I2C_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s.h new file mode 100644 index 000000000..a4409eda1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s.h @@ -0,0 +1,663 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2s.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_I2S_H +#define STM32H7RSxx_HAL_I2S_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref I2S_MSB_LSB_Transmission */ + + uint32_t WSInversion; /*!< Control the Word Select Inversion. + This parameter can be a value of @ref I2S_WSInversion */ + + uint32_t Data24BitAlignment; /*!< Specifies the Data Padding for 24 bits data length + This parameter can be a value of @ref I2S_Data_24Bit_Alignment */ + + uint32_t MasterKeepIOState; /*!< Control of Alternate function GPIOs state + This parameter can be a value of @ref I2S_Master_Keep_IO_State */ + +} I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00UL, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01UL, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02UL, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03UL, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04UL, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_BUSY_TX_RX = 0x05UL, /*!< Data Transmission and Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x06UL, /*!< I2S timeout state */ + HAL_I2S_STATE_ERROR = 0x07UL /*!< I2S error state */ +} HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +typedef struct __I2S_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + const uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + void (*RxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ + void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ + void (* TxRxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S TxRx Half Completed callback */ + void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ + void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ + void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} I2S_HandleTypeDef; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) +/** + + * @brief HAL I2S Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2S_TX_COMPLETE_CB_ID = 0x00UL, /*!< I2S Tx Completed callback ID */ + HAL_I2S_RX_COMPLETE_CB_ID = 0x01UL, /*!< I2S Rx Completed callback ID */ + HAL_I2S_TX_RX_COMPLETE_CB_ID = 0x02UL, /*!< I2S TxRx Completed callback ID */ + HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03UL, /*!< I2S Tx Half Completed callback ID */ + HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04UL, /*!< I2S Rx Half Completed callback ID */ + HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID = 0x05UL, /*!< I2S TxRx Half Completed callback ID */ + HAL_I2S_ERROR_CB_ID = 0x06UL, /*!< I2S Error callback ID */ + HAL_I2S_MSPINIT_CB_ID = 0x07UL, /*!< I2S Msp Init callback ID */ + HAL_I2S_MSPDEINIT_CB_ID = 0x08UL /*!< I2S Msp DeInit callback ID */ + +} HAL_I2S_CallbackIDTypeDef; + +/** + * @brief HAL I2S Callback pointer definition + */ +typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE (0x00000000UL) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT (0x00000001UL) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR (0x00000002UL) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR (0x00000004UL) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA (0x00000008UL) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_PRESCALER (0x00000010UL) /*!< Prescaler Calculation error */ +#define HAL_I2S_ERROR_FRE (0x00000020UL) /*!< FRE error */ +#define HAL_I2S_ERROR_NO_OGT (0x00000040UL) /*!< No On Going Transfer error */ +#define HAL_I2S_ERROR_NOT_SUPPORTED (0x00000080UL) /*!< Requested operation not supported */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) +#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000100UL) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX (0x00000000UL) +#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_SLAVE_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2) +#define I2S_MODE_MASTER_FULLDUPLEX (SPI_I2SCFGR_I2SCFG_2 | SPI_I2SCFGR_I2SCFG_0) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS (0x00000000UL) +#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B (0x00000000UL) +#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B (SPI_I2SCFGR_DATLEN_0) +#define I2S_DATAFORMAT_32B (SPI_I2SCFGR_DATLEN_1) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SCFGR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE (0x00000000UL) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K (192000UL) +#define I2S_AUDIOFREQ_96K (96000UL) +#define I2S_AUDIOFREQ_48K (48000UL) +#define I2S_AUDIOFREQ_44K (44100UL) +#define I2S_AUDIOFREQ_32K (32000UL) +#define I2S_AUDIOFREQ_22K (22050UL) +#define I2S_AUDIOFREQ_16K (16000UL) +#define I2S_AUDIOFREQ_11K (11025UL) +#define I2S_AUDIOFREQ_8K (8000UL) +#define I2S_AUDIOFREQ_DEFAULT (2UL) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S FullDuplex Mode + * @{ + */ +#define I2S_CPOL_LOW (0x00000000UL) +#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_MSB_LSB_Transmission I2S MSB LSB Transmission + * @{ + */ +#define I2S_FIRSTBIT_MSB (0x00000000UL) +#define I2S_FIRSTBIT_LSB SPI_CFG2_LSBFRST +/** + * @} + */ + +/** @defgroup I2S_WSInversion I2S Word Select Inversion + * @{ + */ +#define I2S_WS_INVERSION_DISABLE (0x00000000UL) +#define I2S_WS_INVERSION_ENABLE SPI_I2SCFGR_WSINV +/** + * @} + */ + +/** @defgroup I2S_Data_24Bit_Alignment Data Padding 24Bit + * @{ + */ +#define I2S_DATA_24BIT_ALIGNMENT_RIGHT (0x00000000UL) +#define I2S_DATA_24BIT_ALIGNMENT_LEFT SPI_I2SCFGR_DATFMT +/** + * @} + */ + +/** @defgroup I2S_Master_Keep_IO_State Keep IO State + * @{ + */ +#define I2S_MASTER_KEEP_IO_STATE_DISABLE (0x00000000U) +#define I2S_MASTER_KEEP_IO_STATE_ENABLE SPI_CFG2_AFCNTR +/** + * @} + */ + +/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition + * @{ + */ +#define I2S_IT_RXP SPI_IER_RXPIE +#define I2S_IT_TXP SPI_IER_TXPIE +#define I2S_IT_DXP SPI_IER_DXPIE +#define I2S_IT_UDR SPI_IER_UDRIE +#define I2S_IT_OVR SPI_IER_OVRIE +#define I2S_IT_FRE SPI_IER_TIFREIE +#define I2S_IT_ERR (SPI_IER_UDRIE | SPI_IER_OVRIE | SPI_IER_TIFREIE) +/** + * @} + */ + +/** @defgroup I2S_Flags_Definition I2S Flags Definition + * @{ + */ +#define I2S_FLAG_RXP SPI_SR_RXP /* I2S status flag : Rx-Packet available flag */ +#define I2S_FLAG_TXP SPI_SR_TXP /* I2S status flag : Tx-Packet space available flag */ +#define I2S_FLAG_DXP SPI_SR_DXP /* I2S status flag : Dx-Packet space available flag */ +#define I2S_FLAG_UDR SPI_SR_UDR /* I2S Error flag : Underrun flag */ +#define I2S_FLAG_OVR SPI_SR_OVR /* I2S Error flag : Overrun flag */ +#define I2S_FLAG_FRE SPI_SR_TIFRE /* I2S Error flag : TI mode frame format error flag */ + +#define I2S_FLAG_MASK (SPI_SR_RXP | SPI_SR_TXP | SPI_SR_DXP |SPI_SR_UDR | SPI_SR_OVR | SPI_SR_TIFRE) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)) + +/** @brief Disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)) + +/** @brief Enable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_RXP : Rx-Packet available interrupt + * @arg I2S_IT_TXP : Tx-Packet space available interrupt + * @arg I2S_IT_UDR : Underrun interrupt + * @arg I2S_IT_OVR : Overrun interrupt + * @arg I2S_IT_FRE : TI mode frame format error interrupt + * @arg I2S_IT_ERR : Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_RXP : Rx-Packet available interrupt + * @arg I2S_IT_TXP : Tx-Packet space available interrupt + * @arg I2S_IT_UDR : Underrun interrupt + * @arg I2S_IT_OVR : Overrun interrupt + * @arg I2S_IT_FRE : TI mode frame format error interrupt + * @arg I2S_IT_ERR : Error interrupt enable + * @retval None + */ +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Check if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_RXP : Rx-Packet available interrupt + * @arg I2S_IT_TXP : Tx-Packet space available interrupt + * @arg I2S_IT_DXP : Tx-Packet space available interrupt + * @arg I2S_IT_UDR : Underrun interrupt + * @arg I2S_IT_OVR : Overrun interrupt + * @arg I2S_IT_FRE : TI mode frame format error interrupt + * @arg I2S_IT_ERR : Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2S flag is set or not. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXP : Rx-Packet available flag + * @arg I2S_FLAG_TXP : Tx-Packet space available flag + * @arg I2S_FLAG_UDR : Underrun flag + * @arg I2S_FLAG_OVR : Overrun flag + * @arg I2S_FLAG_FRE : TI mode frame format error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the I2S OVR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_OVRC) + +/** @brief Clear the I2S UDR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_UDRC) + +/** @brief Clear the I2S FRE pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_TIFREFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TIFREC) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size); + +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(const I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(const I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_Private_Constants I2S Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/* Private functions are defined in stm32h7xx_hal_i2S.c file */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Macros I2S Private Macros + * @{ + */ + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of I2S SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXP : Rx-Packet available flag + * @arg I2S_FLAG_TXP : Tx-Packet space available flag + * @arg I2S_FLAG_UDR : Underrun flag + * @arg I2S_FLAG_OVR : Overrun flag + * @arg I2S_FLAG_FRE : TI mode frame format error flag + * @retval SET or RESET. + */ +#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ + & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK))\ + ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __IER__ copy of I2S IER register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_RXP : Rx-Packet available interrupt + * @arg I2S_IT_TXP : Tx-Packet space available interrupt + * @arg I2S_IT_UDR : Underrun interrupt + * @arg I2S_IT_OVR : Overrun interrupt + * @arg I2S_IT_FRE : TI mode frame format error interrupt + * @arg I2S_IT_ERR : Error interrupt enable + * @retval SET or RESET. + */ +#define I2S_CHECK_IT_SOURCE(__IER__, __INTERRUPT__) ((((__IER__)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if I2S Mode parameter is in allowed range. + * @param __MODE__ specifies the I2S Mode. + * This parameter can be a value of @ref I2S_Mode + * @retval None + */ +#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX) || \ + ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX) || \ + ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX)) + +#define IS_I2S_MASTER(__MODE__) (((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX)) + +#define IS_I2S_SLAVE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX)) + +#define IS_I2S_FULLDUPLEX(__MODE__) (((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX) || \ + ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX)) + +#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ + ((__STANDARD__) == I2S_STANDARD_MSB) || \ + ((__STANDARD__) == I2S_STANDARD_LSB) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) + +#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_32B)) + +#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ + ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) + +#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ + ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ + ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) + +#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ + ((__CPOL__) == I2S_CPOL_HIGH)) + +#define IS_I2S_FIRST_BIT(__BIT__) (((__BIT__) == I2S_FIRSTBIT_MSB) || \ + ((__BIT__) == I2S_FIRSTBIT_LSB)) + +#define IS_I2S_WS_INVERSION(__WSINV__) (((__WSINV__) == I2S_WS_INVERSION_DISABLE) || \ + ((__WSINV__) == I2S_WS_INVERSION_ENABLE)) + +#define IS_I2S_DATA_24BIT_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_RIGHT) || \ + ((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_LEFT)) + +#define IS_I2S_MASTER_KEEP_IO_STATE(__AFCNTR__) (((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_DISABLE) || \ + ((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_ENABLE)) + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_I2S_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s_ex.h new file mode 100644 index 000000000..302b1737c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i2s_ex.h @@ -0,0 +1,26 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2s_ex.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** + ****************************************************************************** + ===== I2S FULL DUPLEX FEATURE ===== + I2S Full Duplex APIs are available in stm32h7rsxx_hal_i2s.c/.h + ****************************************************************************** + */ + + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i3c.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i3c.h new file mode 100644 index 000000000..2e600a018 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_i3c.h @@ -0,0 +1,1371 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_i3c.h + * @author MCD Application Team + * @brief Header file of I3C HAL module. + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/ +#ifndef STM32H7RSxx_HAL_I3C_H +#define STM32H7RSxx_HAL_I3C_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" +#include "stm32h7rsxx_ll_i3c.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup I3C + * @{ + */ + +/* Exported types ----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Exported_Types I3C Exported Types + * @{ + */ +/** @defgroup I3C_Init_Structure_definition I3C Init Structure definition + * @brief I3C Init Structure definition + * @{ + */ +typedef struct +{ + LL_I3C_CtrlBusConfTypeDef CtrlBusCharacteristic; /*!< Specifies the I3C controller bus characteristic configuration + when Controller mode */ + + LL_I3C_TgtBusConfTypeDef TgtBusCharacteristic; /*!< Specifies the I3C target bus characteristic configuration + when Target mode */ + +} I3C_InitTypeDef; +/** + * @} + */ + +/** @defgroup I3C_FIFO_Config_Structure_definition I3C FIFO Configuration Structure definition + * @brief I3C FIFO configuration structure definition + * @{ + */ +typedef struct +{ + uint32_t RxFifoThreshold; /*!< Specifies the I3C Rx FIFO threshold level. + This parameter must be a value of @ref I3C_RX_FIFO_THRESHOLD */ + + uint32_t TxFifoThreshold; /*!< Specifies the I3C Tx FIFO threshold level. + This parameter must be a value of @ref I3C_TX_FIFO_THRESHOLD */ + + uint32_t ControlFifo; /*!< Specifies the I3C control FIFO enable/disable state. + This parameter is configured only with controller mode and it + must be a value of @ref I3C_CONTROL_FIFO_STATE */ + + uint32_t StatusFifo; /*!< Specifies the I3C status FIFO enable/disable state. + This parameter is configured only with controller mode and it + must be a value of @ref I3C_STATUS_FIFO_STATE */ +} I3C_FifoConfTypeDef; +/** + * @} + */ + +/** @defgroup I3C_Controller_Config_Structure_definition I3C Controller Configuration Structure definition + * @brief I3C controller configuration structure definition + * @{ + */ +typedef struct +{ + uint8_t DynamicAddr; /*!< Specifies the dynamic address of the controller when goes in target mode. + This parameter must be a number between Min_Data=0x00 and Max_Data=0x7F */ + + uint8_t StallTime; /*!< Specifies the controller clock stall time in number of kernel clock cycles. + This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF */ + + FunctionalState HotJoinAllowed; /*!< Specifies the Enable/Disable state of the controller Hot Join acknowledgement + when receiving a hot join request from target. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ACKStallState; /*!< Specifies the Enable/Disable state of the controller clock stall + on the ACK phase. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState CCCStallState; /*!< Specifies the Enable/Disable state of the controller clock stall on the + T bit phase of a CCC communication to allow the target to decode command. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState TxStallState; /*!< Specifies the Enable/Disable state of the controller clock stall on + parity phase of data to allow the target to read received data. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState RxStallState; /*!< Specifies the Enable/Disable state of the controller clock stall on the T bit + phase of data enable to allow the target to prepare data to be sent. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState HighKeeperSDA; /*!< Specifies the Enable/Disable state of the controller SDA high keeper. + This parameter can be set to ENABLE or DISABLE */ +} I3C_CtrlConfTypeDef; +/** + * @} + */ + +/** @defgroup I3C_Target_Config_Structure_definition I3C Target Configuration Structure definition + * @brief I3C target configuration structure definition + * @{ + */ +typedef struct +{ + uint8_t Identifier; /*!< Specifies the target characteristic ID (MIPI named reference DCR). + This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF */ + + uint8_t MIPIIdentifier; /*!< Specifies the bits [12-15] of the 48-provisioned ID + (MIPI named reference PID), other 48-provisioned ID are hardcoded. + This parameter must be a number between Min_Data=0x00 and Max_Data=0x0F */ + + FunctionalState CtrlRoleRequest; /*!< Specifies the Enable/Disable state of the target authorization request + for a second master Chip. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState HotJoinRequest; /*!< Specifies the Enable/Disable state of the target hot join + authorization request. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState IBIRequest; /*!< Specifies the Enable/Disable state of the target in Band Interrupt + authorization request. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState IBIPayload; /*!< Specifies the Enable/Disable state of sending data payload after + an accepted IBI. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t IBIPayloadSize; /*!< Specifies the I3C target payload data size. + This parameter must be a value of @ref I3C_PAYLOAD_SIZE */ + + uint16_t MaxReadDataSize; /*!< Specifies the numbers of data bytes that the target can read at maximum. + This parameter must be a number between Min_Data=0x00 and Max_Data=0xFFFF */ + + uint16_t MaxWriteDataSize; /*!< Specifies the numbers of data bytes that the target can write at maximum. + This parameter must be a number between Min_Data=0x00 and Max_Data=0xFFFF */ + + FunctionalState CtrlCapability; /*!< Specifies the Enable/Disable state of the target controller capability. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState GroupAddrCapability; /*!< Specifies the Enable/Disable state of the target support of group address + after a controller role hand-off. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t DataTurnAroundDuration; /*!< Specifies the I3C target clock-to-data turnaround time. + This parameter must be a value of @ref I3C_TURNAROUND_TIME_TSCO */ + + uint8_t MaxReadTurnAround; /*!< Specifies the target maximum read turnaround byte. + This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF */ + + uint32_t MaxDataSpeed; /*!< Specifies the I3C target returned GETMXDS CCC format. + This parameter must be a value of @ref I3C_GETMXDS_FORMAT */ + + FunctionalState MaxSpeedLimitation; /*!< Specifies the Enable/Disable state of the target max data speed limitation. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HandOffActivityState; /*!< Specifies the I3C target activity state when becoming controller. + This parameter must be a value of @ref I3C_HANDOFF_ACTIVITY_STATE */ + + FunctionalState HandOffDelay; /*!< Specifies the Enable/Disable state of the target need of delay to process + the controller role hand-off. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState PendingReadMDB; /*!< Specifies the Enable/Disable state of the transmission of a mandatory + data bytes indicating a pending read notification for GETCAPR CCC command. + This parameter can be set to ENABLE or DISABLE */ +} I3C_TgtConfTypeDef; +/** + * @} + */ + +/** @defgroup I3C_Device_Config_Structure_definition I3C Device Configuration Structure definition + * @brief I3C device configuration structure definition + * @{ + */ +typedef struct +{ + uint8_t DeviceIndex; /*!< Specifies the index value of the device in the DEVRx register. + This parameter must be a number between Min_Data=1 and Max_Data=4 */ + + uint8_t TargetDynamicAddr; /*!< Specifies the dynamic address of the target x (1 to 4) connected on the bus. + This parameter must be a number between Min_Data=0x00 and Max_Data=0x7F */ + + FunctionalState IBIAck; /*!< Specifies the Enable/Disable state of the controller's ACK when receiving + an IBI from a target x (1 to 4) connected on the bus. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState IBIPayload; /*!< Specifies the Enable/Disable state of the controller's receiving IBI payload + after acknowledging an IBI requested from a target x (1 to 4) connected + on the bus. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState CtrlRoleReqAck; /*!< Specifies the Enable/Disable state of the controller's ACK when receiving + a control request from a target x (1 to 4) connected on the bus. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState CtrlStopTransfer; /*!< Specifies the Enable/Disable state of the controller's stop transfer after + receiving an IBI request from a target x (1 to 4) connected on the bus. + This parameter can be set to ENABLE or DISABLE */ + +} I3C_DeviceConfTypeDef; +/** + * @} + */ + +/** @defgroup I3C_mode_structure_definition I3C mode structure definition + * @brief I3C Mode structure definition + * @{ + */ +typedef enum +{ + HAL_I3C_MODE_NONE = 0x00U, /*!< No I3C communication on going */ + HAL_I3C_MODE_CONTROLLER = 0x01U, /*!< I3C communication is in controller Mode */ + HAL_I3C_MODE_TARGET = 0x02U, /*!< I3C communication is in target Mode */ + +} HAL_I3C_ModeTypeDef; +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @{ + */ +typedef enum +{ + HAL_I3C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I3C_STATE_READY = 0x10U, /*!< Peripheral Initialized and ready for use */ + HAL_I3C_STATE_BUSY = 0x20U, /*!< An internal process is ongoing */ + HAL_I3C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I3C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I3C_STATE_BUSY_TX_RX = 0x23U, /*!< Data Multiple Transfer process is ongoing */ + HAL_I3C_STATE_BUSY_DAA = 0x24U, /*!< Dynamic address assignment process is ongoing */ + HAL_I3C_STATE_LISTEN = 0x30U, /*!< Listen process is ongoing */ + HAL_I3C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I3C_STATE_ERROR = 0xE0U, /*!< Error */ + +} HAL_I3C_StateTypeDef; +/** + * @} + */ + +/** @defgroup I3C_CCCInfoTypeDef_Structure_definition I3C CCCInfoTypeDef Structure definition + * @brief I3C CCCInfoTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint32_t DynamicAddrValid; /*!< I3C target Dynamic Address Valid (updated during ENTDAA/RSTDAA/SETNEWDA CCC) + This parameter can be Valid=1U or Not Valid=0U */ + uint32_t DynamicAddr; /*!< I3C target Dynamic Address (updated during ENTDAA/RSTDAA/SETNEWDA CCC) */ + uint32_t MaxWriteLength; /*!< I3C target Maximum Write Length (updated during SETMWL CCC) */ + uint32_t MaxReadLength; /*!< I3C target Maximum Read Length (updated during SETMRL CCC) */ + uint32_t ResetAction; /*!< I3C target Reset Action level (updated during RSTACT CCC) */ + uint32_t ActivityState; /*!< I3C target Activity State (updated during ENTASx CCC) */ + uint32_t HotJoinAllowed; /*!< I3C target Hot Join (updated during ENEC/DISEC CCC) + This parameter can be Allowed=1U or Not Allowed=0U */ + uint32_t InBandAllowed; /*!< I3C target In Band Interrupt (updated during ENEC/DISEC CCC) + This parameter can be Allowed=1U or Not Allowed=0U */ + uint32_t CtrlRoleAllowed; /*!< I3C target Controller Role Request (updated during ENEC/DISEC CCC) + This parameter can be Allowed=1U or Not Allowed=0U */ + uint32_t IBICRTgtAddr; /*!< I3C controller receive Target Address during IBI or Controller Role Request event*/ + uint32_t IBITgtNbPayload; /*!< I3C controller get Number of Data Payload after an IBI event */ + uint32_t IBITgtPayload; /*!< I3C controller receive IBI Payload after an IBI event */ + +} I3C_CCCInfoTypeDef; +/** + * @} + */ + +/** @defgroup I3C_ControlTypeDef_Structure_definition I3C ControlTypeDef Structure definition + * @brief I3C ControlTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint32_t *pBuffer; /*!< Pointer to the buffer containing the control or status register values */ + uint32_t Size; /*!< The size of pBuffer in words */ + +} I3C_ControlTypeDef; +/** + * @} + */ + +/** @defgroup I3C_DataTypeDef_Structure_definition I3C DataTypeDef Structure definition + * @brief I3C DataTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint8_t *pBuffer; /*!< Pointer to the buffer containing all data values to transfer */ + uint32_t Size; /*!< The size of pBuffer in bytes */ + +} I3C_DataTypeDef; + +/** + * @} + */ + +/** @defgroup I3C_CCCTypeDef_Structure_definition I3C CCCTypeDef Structure definition + * @brief I3C CCCTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint8_t TargetAddr; /*!< Dynamic or Static target Address */ + uint8_t CCC; /*!< CCC value code */ + I3C_DataTypeDef CCCBuf; /*!< Contain size of associated data and size of defining byte if any. + Contain pointer to CCC associated data */ + uint32_t Direction; /*!< CCC read and/or write direction message */ + +} I3C_CCCTypeDef; +/** + * @} + */ + +/** @defgroup I3C_BCRTypeDef_Structure_definition I3C BCRTypeDef Structure definition + * @brief I3C BCRTypeDef Structure definition + * @{ + */ +typedef struct +{ + FunctionalState MaxDataSpeedLimitation; /*!< Max data speed limitation */ + FunctionalState IBIRequestCapable; /*!< IBI request capable */ + FunctionalState IBIPayload; /*!< IBI payload data */ + FunctionalState OfflineCapable; /*!< Offline capable */ + FunctionalState VirtualTargetSupport; /*!< Virtual target support */ + FunctionalState AdvancedCapabilities; /*!< Advanced capabilities */ + FunctionalState DeviceRole; /*!< Device role */ + +} I3C_BCRTypeDef; +/** + * @} + */ + +/** @defgroup I3C_PIDTypeDef_Structure_definition I3C PIDTypeDef Structure definition + * @brief I3C_PIDTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint16_t MIPIMID; /*!< MIPI Manufacturer ID */ + uint8_t IDTSEL; /*!< Provisioned ID Type Selector */ + uint16_t PartID; /*!< Part ID device vendor to define */ + uint8_t MIPIID; /*!< Instance ID */ + +} I3C_PIDTypeDef; +/** + * @} + */ + +/** @defgroup I3C_ENTDAAPayloadTypeDef_Structure_definition I3C ENTDAAPayloadTypeDef Structure definition + * @brief I3C ENTDAAPayloadTypeDef Structure definition + * @{ + */ +typedef struct +{ + I3C_BCRTypeDef BCR; /*!< Bus Characteristics Register */ + uint32_t DCR; /*!< Device Characteristics Register */ + I3C_PIDTypeDef PID; /*!< Provisioned ID */ + +} I3C_ENTDAAPayloadTypeDef; +/** + * @} + */ + +/** @defgroup I3C_PrivateTypeDef_Structure_definition I3C PrivateTypeDef Structure definition + * @brief I3C PrivateTypeDef Structure definition + * @{ + */ +typedef struct +{ + uint8_t TargetAddr; /*!< Dynamic or Static target Address */ + I3C_DataTypeDef TxBuf; /*!< Buffer structure containing the data to transmit (little endian) */ + I3C_DataTypeDef RxBuf; /*!< Buffer structure containing the data to receive (little endian) */ + uint32_t Direction; /*!< Read and/or write message */ + +} I3C_PrivateTypeDef; +/** + * @} + */ + +/** @defgroup I3C_XferTypeDef_Structure_definition I3C XferTypeDef Structure definition + * @brief I3C XferTypeDef Structure definition + * @{ + */ +typedef struct +{ + I3C_ControlTypeDef CtrlBuf; /*!< Buffer structure containing the control register values */ + I3C_ControlTypeDef StatusBuf; /*!< Buffer structure containing the status register values */ + I3C_DataTypeDef TxBuf; /*!< Buffer structure containing the data to transmit */ + I3C_DataTypeDef RxBuf; /*!< Buffer structure containing the data to receive */ + +} I3C_XferTypeDef; +/** + * @} + */ + +/** @defgroup I3C_handle_Structure_definition I3C handle Structure definition + * @brief I3C handle Structure definition + * @{ + */ +typedef struct __I3C_HandleTypeDef +{ + I3C_TypeDef *Instance; /*!< I3C registers base address */ + + I3C_InitTypeDef Init; /*!< I3C communication parameters */ + + HAL_I3C_ModeTypeDef Mode; /*!< I3C communication mode. + This parameter must be a value of + @ref I3C_mode_structure_definition */ + + I3C_XferTypeDef *pXferData; /*!< I3C transfer buffers pointer */ + + const I3C_CCCTypeDef *pCCCDesc; /*!< I3C CCC descriptor pointer */ + + const I3C_PrivateTypeDef *pPrivateDesc; /*!< I3C private transfer descriptor pointer */ + + uint32_t ControlXferCount; /*!< I3C counter indicating the remaining + control data bytes to write in + the control register */ + + uint32_t RxXferCount; /*!< I3C counter indicating the remaining + data bytes to receive */ + + uint32_t TxXferCount; /*!< I3C counter indicating the remaining + data bytes to transmit */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmacr; /*!< I3C control DMA handle parameters */ + + DMA_HandleTypeDef *hdmatx; /*!< I3C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I3C Rx DMA handle parameters */ + + DMA_HandleTypeDef *hdmasr; /*!< I3C status DMA handle parameters */ +#endif /* HAL_DMA_MODULE_ENABLED */ + + HAL_LockTypeDef Lock; /*!< I3C locking object */ + + __IO HAL_I3C_StateTypeDef State; /*!< I3C communication state */ + + __IO HAL_I3C_StateTypeDef PreviousState; /*!< I3C communication previous state */ + + __IO uint32_t ErrorCode; /*!< I3C Error code */ + + HAL_StatusTypeDef(*XferISR)(struct __I3C_HandleTypeDef *hi3c, + uint32_t itMasks); /*!< I3C transfer IRQ handler function pointer */ + + void(*ptrTxFunc)(struct __I3C_HandleTypeDef *hi3c); /*!< I3C transmit function pointer */ + + void(*ptrRxFunc)(struct __I3C_HandleTypeDef *hi3c); /*!< I3C receive function pointer */ + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + + void (* CtrlTxCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Controller private data and CCC Tx Transfer complete callback */ + + void (* CtrlRxCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Controller private data and CCC Rx Transfer completed callback */ + + void (* CtrlMultipleXferCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Controller multiple Direct CCC, I3C private or I2C Transfer completed callback */ + + void (* CtrlDAACpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Controller Dynamic Address Assignment completed callback */ + + void (* TgtReqDynamicAddrCallback)(struct __I3C_HandleTypeDef *hi3c, uint64_t targetPayload); + /*!< I3C Controller request dynamic address callback during Dynamic Address Assignment processus */ + + void (* TgtTxCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Target private data Tx Transfer completed callback */ + + void (* TgtRxCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Target private data Rx Transfer completed callback */ + + void (* TgtHotJoinCallback)(struct __I3C_HandleTypeDef *hi3c, uint8_t dynamicAddress); + /*!< I3C Target Hot-Join callback */ + + void (* NotifyCallback)(struct __I3C_HandleTypeDef *hi3c, uint32_t eventId); + /*!< I3C Target or Controller asynchronous events callback */ + + void (* ErrorCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Error callback */ + + void (* AbortCpltCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Abort complete callback */ + + void (* MspInitCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Msp Init callback */ + + void (* MspDeInitCallback)(struct __I3C_HandleTypeDef *hi3c); + /*!< I3C Msp DeInit callback */ + +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + +} I3C_HandleTypeDef; +/** + * @} + */ + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_I3C_Callback_ID_definition I3C callback ID definition + * @brief HAL I3C callback ID definition + * @{ + */ +typedef enum +{ + /*!< I3C Controller Tx Transfer completed callback ID */ + HAL_I3C_CTRL_TX_COMPLETE_CB_ID = 0x00U, + /*!< I3C Controller Rx Transfer completed callback ID */ + HAL_I3C_CTRL_RX_COMPLETE_CB_ID = 0x01U, + /*!< I3C Controller Multiple Transfer completed callback ID */ + HAL_I3C_CTRL_MULTIPLE_XFER_COMPLETE_CB_ID = 0x02U, + /*!< I3C Controller Dynamic Address Assignment completed callback ID */ + HAL_I3C_CTRL_DAA_COMPLETE_CB_ID = 0x03U, + /*!< I3C Controller request dynamic address completed callback ID */ + HAL_I3C_TGT_REQ_DYNAMIC_ADDR_CB_ID = 0x04U, + /*!< I3C Target Tx Transfer completed callback ID */ + HAL_I3C_TGT_TX_COMPLETE_CB_ID = 0x05U, + /*!< I3C Target Rx Transfer completed callback ID */ + HAL_I3C_TGT_RX_COMPLETE_CB_ID = 0x06U, + /*!< I3C Target Hot-join notification callback ID */ + HAL_I3C_TGT_HOTJOIN_CB_ID = 0x07U, + /*!< I3C Target or Controller receive notification callback ID */ + HAL_I3C_NOTIFY_CB_ID = 0x08U, + /*!< I3C Error callback ID */ + HAL_I3C_ERROR_CB_ID = 0x09U, + /*!< I3C Abort callback ID */ + HAL_I3C_ABORT_CB_ID = 0x0AU, + /*!< I3C Msp Init callback ID */ + HAL_I3C_MSPINIT_CB_ID = 0x0BU, + /*!< I3C Msp DeInit callback ID */ + HAL_I3C_MSPDEINIT_CB_ID = 0x0CU + +} HAL_I3C_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_I3C_Callback_Pointer_definition I3C callback Pointer definition + * @brief HAL I3C callback pointer definition + * @{ + */ +typedef void (*pI3C_CallbackTypeDef)(I3C_HandleTypeDef *hi3c); +typedef void (*pI3C_NotifyCallbackTypeDef)(I3C_HandleTypeDef *hi3c, uint32_t notifyId); +typedef void (*pI3C_TgtHotJoinCallbackTypeDef)(I3C_HandleTypeDef *hi3c, uint8_t dynamicAddress); +typedef void (*pI3C_TgtReqDynamicAddrCallbackTypeDef)(I3C_HandleTypeDef *hi3c, uint64_t targetPayload); +/** + * @} + */ +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + +/** + * @} + */ + +/* Exported constants ------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Exported_Constants I3C Exported Constants + * @{ + */ + +/** @defgroup HAL_I3C_Notification_ID_definition I3C Notification ID definition + * @brief HAL I3C Notification ID definition + * @{ + */ + +#define EVENT_ID_GETACCCR (0x00000001U) +/*!< I3C target complete controller-role hand-off (direct GETACCR CCC) event */ +#define EVENT_ID_IBIEND (0x00000002U) +/*!< I3C target IBI end process event */ +#define EVENT_ID_DAU (0x00000004U) +/*!< I3C target receive a dynamic address update (ENTDAA/RSTDAA/SETNEWDA CCC) event */ +#define EVENT_ID_GETx (0x00000008U) +/*!< I3C target receive any direct GETxxx CCC event */ +#define EVENT_ID_GETSTATUS (0x00000010U) +/*!< I3C target receive get status command (direct GETSTATUS CCC) event */ +#define EVENT_ID_SETMWL (0x00000020U) +/*!< I3C target receive maximum write length update (direct SETMWL CCC) event */ +#define EVENT_ID_SETMRL (0x00000040U) +/*!< I3C target receive maximum read length update(direct SETMRL CCC) event */ +#define EVENT_ID_RSTACT (0x00000080U) +/*!< I3C target detect reset pattern (broadcast or direct RSTACT CCC) event */ +#define EVENT_ID_ENTASx (0x00000100U) +/*!< I3C target receive activity state update (direct or broadcast ENTASx) event */ +#define EVENT_ID_ENEC_DISEC (0x00000200U) +/*!< I3C target receive a direct or broadcast ENEC/DISEC CCC event */ +#define EVENT_ID_DEFTGTS (0x00000400U) +/*!< I3C target receive a broadcast DEFTGTS CCC event */ +#define EVENT_ID_DEFGRPA (0x00000800U) +/*!< I3C target receive a group addressing (broadcast DEFGRPA CCC) event */ +#define EVENT_ID_WKP (0x00001000U) +/*!< I3C target wakeup event */ +#define EVENT_ID_IBI (0x00002000U) +/*!< I3C controller receive IBI event */ +#define EVENT_ID_CR (0x00004000U) +/*!< I3C controller controller-role request event */ +#define EVENT_ID_HJ (0x00008000U) +/*!< I3C controller hot-join event */ +/** + * @} + */ + +/** @defgroup I3C_OPTION_DEFINITION OPTION DEFINITION + * @note HAL I3C option value coding follow below described bitmap: + * b31 + * 0 : message end type restart + * 1 : message end type stop + * b30-b29-b28-b27 + * 0010 : I3C private message + * 0011 : direct CCC message + * 0110 : broadcast CCC message + * 0100 : I2C private message + * b4 + * 0 : message without arbitration header + * 1 : message with arbitration header + * b0 + * 0 : message without defining byte + * 1 : message with defining byte + * + * other bits (not used) + * @{ + */ +#define I3C_DIRECT_WITH_DEFBYTE_RESTART (0x18000001U) /*!< Restart between each Direct Command then Stop + request for last command. + Each Command have an associated defining byte */ +#define I3C_DIRECT_WITH_DEFBYTE_STOP (0x98000001U) /*!< Stop between each Direct Command. + Each Command have an associated defining byte */ +#define I3C_DIRECT_WITHOUT_DEFBYTE_RESTART (0x18000000U) /*!< Restart between each Direct Command then Stop + request for last command. + Each Command have not an associated defining byte */ +#define I3C_DIRECT_WITHOUT_DEFBYTE_STOP (0x98000000U) /*!< Stop between each Direct Command. + Each Command have not an associated defining byte */ +#define I3C_BROADCAST_WITH_DEFBYTE_RESTART (0x30000001U) /*!< Restart between each Broadcast Command then Stop + request for last command. + Each Command have an associated defining byte */ +#define I3C_BROADCAST_WITH_DEFBYTE_STOP (0xB0000001U) /*!< Stop between each Broadcast Command. + Each Command have an associated defining byte */ +#define I3C_BROADCAST_WITHOUT_DEFBYTE_RESTART (0x30000000U) /*!< Restart between each Broadcast Command then Stop + request for last command. + Each Command have not an associated defining byte */ +#define I3C_BROADCAST_WITHOUT_DEFBYTE_STOP (0xB0000000U) /*!< Stop between each Broadcast Command. + Each Command have not an associated defining byte */ +#define I3C_PRIVATE_WITH_ARB_RESTART (0x10000000U) /*!< Restart between each I3C Private message then Stop + request for last message. + Each Message start with an arbitration header after + start bit condition */ +#define I3C_PRIVATE_WITH_ARB_STOP (0x90000000U) /*!< Stop between each I3C Private message. + Each Message start with an arbitration header after + start bit condition */ +#define I3C_PRIVATE_WITHOUT_ARB_RESTART (0x10000004U) /*!< Restart between each I3C message then Stop request + for last message. + Each Message start with Target address after start + bit condition */ +#define I3C_PRIVATE_WITHOUT_ARB_STOP (0x90000004U) /*!< Stop between each I3C Private message. + Each Message start with Target address after + start bit condition */ +#define I2C_PRIVATE_WITH_ARB_RESTART (0x20000000U) /*!< Restart between each I2C Private message then Stop + request for last message. + Each Message start with an arbitration header after + start bit condition */ +#define I2C_PRIVATE_WITH_ARB_STOP (0xA0000000U) /*!< Stop between each I2C Private message. + Each Message start with an arbitration header after + start bit condition */ +#define I2C_PRIVATE_WITHOUT_ARB_RESTART (0x20000004U) /*!< Restart between each I2C message then Stop request + for last message. + Each Message start with Target address after start + bit condition */ +#define I2C_PRIVATE_WITHOUT_ARB_STOP (0xA0000004U) /*!< Stop between each I2C Private message. + Each Message start with Target address after start + bit condition */ +/** + * @} + */ + +/** @defgroup I3C_DYNAMIC_ADDRESS_OPTION_DEFINITION I3C DYNAMIC ADDRESS OPTION DEFINITION + * @{ + */ +#define I3C_RSTDAA_THEN_ENTDAA (0x00000001U) /*!< Initiate a RSTDAA before a ENTDAA procedure */ +#define I3C_ONLY_ENTDAA (0x00000002U) /*!< Initiate a ENTDAA without RSTDAA */ +/** + * @} + */ + +/** @defgroup I3C_ERROR_CODE_DEFINITION ERROR CODE DEFINITION + * @{ + */ +#define HAL_I3C_ERROR_NONE (0x00000000U) /*!< No error */ + +#define HAL_I3C_ERROR_CE0 (I3C_SER_PERR | LL_I3C_CONTROLLER_ERROR_CE0) /*!< Controller detected an illegally + formatted CCC */ +#define HAL_I3C_ERROR_CE1 (I3C_SER_PERR | LL_I3C_CONTROLLER_ERROR_CE1) /*!< Controller detected that transmitted data + on the bus is different than expected */ +#define HAL_I3C_ERROR_CE2 (I3C_SER_PERR | LL_I3C_CONTROLLER_ERROR_CE2) /*!< Controller detected that broadcast address + 7'h7E has been nacked */ +#define HAL_I3C_ERROR_CE3 (I3C_SER_PERR | LL_I3C_CONTROLLER_ERROR_CE3) /*!< Controller detected that new Controller + did not drive the bus after + Controller-role handoff */ +#define HAL_I3C_ERROR_TE0 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE0) /*!< Target detected an invalid broadcast + address */ +#define HAL_I3C_ERROR_TE1 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE1) /*!< Target detected an invalid CCC Code */ +#define HAL_I3C_ERROR_TE2 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE2) /*!< Target detected a parity error during + a write data */ +#define HAL_I3C_ERROR_TE3 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE3) /*!< Target detected a parity error on assigned + address during dynamic address + arbitration */ +#define HAL_I3C_ERROR_TE4 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE4) /*!< Target detected 7'h7E missing after Restart + during Dynamic Address Assignment + procedure */ +#define HAL_I3C_ERROR_TE5 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE5) /*!< Target detected an illegally + formatted CCC */ +#define HAL_I3C_ERROR_TE6 (I3C_SER_PERR | LL_I3C_TARGET_ERROR_TE6) /*!< Target detected that transmitted data on + the bus is different than expected */ +#define HAL_I3C_ERROR_DATA_HAND_OFF (I3C_SER_DERR) /*!< I3C data error during controller-role hand-off process */ +#define HAL_I3C_ERROR_DATA_NACK (I3C_SER_DNACK) /*!< I3C data not acknowledged error */ +#define HAL_I3C_ERROR_ADDRESS_NACK (I3C_SER_ANACK) /*!< I3C address not acknowledged error */ +#define HAL_I3C_ERROR_COVR (I3C_SER_COVR) /*!< I3C S FIFO Over-Run or C FIFO Under-Run error */ +#define HAL_I3C_ERROR_DOVR (I3C_SER_DOVR) /*!< I3C Rx FIFO Over-Run or Tx FIFO Under-Run error */ +#define HAL_I3C_ERROR_STALL (I3C_SER_STALL) /*!< I3C SCL stall error */ +#define HAL_I3C_ERROR_DMA (0x00010000U) /*!< DMA transfer error */ +#define HAL_I3C_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */ +#define HAL_I3C_ERROR_DMA_PARAM (0x00040000U) /*!< DMA Parameter Error */ +#define HAL_I3C_ERROR_INVALID_PARAM (0x00080000U) /*!< Invalid Parameters error */ +#define HAL_I3C_ERROR_SIZE (0x00100000U) /*!< I3C size management error */ +#define HAL_I3C_ERROR_NOT_ALLOWED (0x00200000U) /*!< I3C operation is not allowed */ +#define HAL_I3C_ERROR_DYNAMIC_ADDR (0x00400000U) /*!< I3C dynamic address error */ + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) +#define HAL_I3C_ERROR_INVALID_CALLBACK (0x00800000U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ +/** + * @} + */ + +/** @defgroup I3C_SDA_HOLD_TIME SDA HOLD TIME + * @{ + */ +#define HAL_I3C_SDA_HOLD_TIME_0_5 LL_I3C_SDA_HOLD_TIME_0_5 /*!< SDA hold time equal to 0.5 x ti3cclk */ +#define HAL_I3C_SDA_HOLD_TIME_1_5 LL_I3C_SDA_HOLD_TIME_1_5 /*!< SDA hold time equal to 1.5 x ti3cclk */ +/** + * @} + */ + +/** @defgroup I3C_OWN_ACTIVITY_STATE OWN ACTIVITY STATE + * @{ + */ +#define HAL_I3C_OWN_ACTIVITY_STATE_0 LL_I3C_OWN_ACTIVITY_STATE_0 /*!< Own Controller Activity state 0 */ +#define HAL_I3C_OWN_ACTIVITY_STATE_1 LL_I3C_OWN_ACTIVITY_STATE_1 /*!< Own Controller Activity state 1 */ +#define HAL_I3C_OWN_ACTIVITY_STATE_2 LL_I3C_OWN_ACTIVITY_STATE_2 /*!< Own Controller Activity state 2 */ +#define HAL_I3C_OWN_ACTIVITY_STATE_3 LL_I3C_OWN_ACTIVITY_STATE_3 /*!< Own Controller Activity state 3 */ +/** + * @} + */ + +/** @defgroup I3C_RX_FIFO_THRESHOLD RX FIFO THRESHOLD + * @{ + */ +#define HAL_I3C_RXFIFO_THRESHOLD_1_4 LL_I3C_RXFIFO_THRESHOLD_1_4 /*!< Rx Fifo Threshold is 1 byte */ +#define HAL_I3C_RXFIFO_THRESHOLD_4_4 LL_I3C_RXFIFO_THRESHOLD_4_4 /*!< Rx Fifo Threshold is 4 bytes */ +/** + * @} + */ + +/** @defgroup I3C_TX_FIFO_THRESHOLD TX FIFO THRESHOLD + * @{ + */ +#define HAL_I3C_TXFIFO_THRESHOLD_1_4 LL_I3C_TXFIFO_THRESHOLD_1_4 /*!< Tx Fifo Threshold is 1 byte */ +#define HAL_I3C_TXFIFO_THRESHOLD_4_4 LL_I3C_TXFIFO_THRESHOLD_4_4 /*!< Tx Fifo Threshold is 4 bytes */ +/** + * @} + */ + +/** @defgroup I3C_CONTROL_FIFO_STATE CONTROL FIFO STATE + * @{ + */ +#define HAL_I3C_CONTROLFIFO_DISABLE 0x00000000U /*!< Control FIFO mode disable */ +#define HAL_I3C_CONTROLFIFO_ENABLE I3C_CFGR_TMODE /*!< Control FIFO mode enable */ +/** + * @} + */ + +/** @defgroup I3C_STATUS_FIFO_STATE STATUS FIFO STATE + * @{ + */ +#define HAL_I3C_STATUSFIFO_DISABLE 0x00000000U /*!< Status FIFO mode disable */ +#define HAL_I3C_STATUSFIFO_ENABLE I3C_CFGR_SMODE /*!< Status FIFO mode enable */ +/** + * @} + */ + +/** @defgroup I3C_DIRECTION DIRECTION + * @{ + */ +#define HAL_I3C_DIRECTION_WRITE LL_I3C_DIRECTION_WRITE /*!< Write transfer */ +#define HAL_I3C_DIRECTION_READ LL_I3C_DIRECTION_READ /*!< Read transfer */ +#define HAL_I3C_DIRECTION_BOTH (LL_I3C_DIRECTION_READ | 1U) /*!< Read and Write transfer */ +/** + * @} + */ + +/** @defgroup I3C_PAYLOAD_SIZE PAYLOAD SIZE + * @{ + */ +#define HAL_I3C_PAYLOAD_EMPTY LL_I3C_PAYLOAD_EMPTY /*!< Empty payload, no additional data after IBI acknowledge */ +#define HAL_I3C_PAYLOAD_1_BYTE LL_I3C_PAYLOAD_1_BYTE /*!< One additional data byte after IBI acknowledge */ +#define HAL_I3C_PAYLOAD_2_BYTES LL_I3C_PAYLOAD_2_BYTES /*!< Two additional data bytes after IBI acknowledge */ +#define HAL_I3C_PAYLOAD_3_BYTES LL_I3C_PAYLOAD_3_BYTES /*!< Three additional data bytes after IBI acknowledge */ +#define HAL_I3C_PAYLOAD_4_BYTES LL_I3C_PAYLOAD_4_BYTES /*!< Four additional data bytes after IBI acknowledge */ +/** + * @} + */ + +/** @defgroup I3C_HANDOFF_ACTIVITY_STATE HANDOFF ACTIVITY STATE + * @{ + */ +#define HAL_I3C_HANDOFF_ACTIVITY_STATE_0 LL_I3C_HANDOFF_ACTIVITY_STATE_0 /*!< Activity state 0 after handoff */ +#define HAL_I3C_HANDOFF_ACTIVITY_STATE_1 LL_I3C_HANDOFF_ACTIVITY_STATE_1 /*!< Activity state 1 after handoff */ +#define HAL_I3C_HANDOFF_ACTIVITY_STATE_2 LL_I3C_HANDOFF_ACTIVITY_STATE_2 /*!< Activity state 2 after handoff */ +#define HAL_I3C_HANDOFF_ACTIVITY_STATE_3 LL_I3C_HANDOFF_ACTIVITY_STATE_3 /*!< Activity state 3 after handoff */ +/** + * @} + */ + +/** @defgroup I3C_GETMXDS_FORMAT GETMXDS FORMAT + * @{ + */ +#define HAL_I3C_GETMXDS_FORMAT_1 LL_I3C_GETMXDS_FORMAT_1 /*!< GETMXDS CCC Format 1 is used, no MaxRdTurn + field in response */ +#define HAL_I3C_GETMXDS_FORMAT_2_LSB LL_I3C_GETMXDS_FORMAT_2_LSB /*!< GETMXDS CCC Format 2 is used, MaxRdTurn field + in response, LSB = RDTURN[7:0] */ +#define HAL_I3C_GETMXDS_FORMAT_2_MID LL_I3C_GETMXDS_FORMAT_2_MID /*!< GETMXDS CCC Format 2 is used, MaxRdTurn field + in response, Middle byte = RDTURN[7:0] */ +#define HAL_I3C_GETMXDS_FORMAT_2_MSB LL_I3C_GETMXDS_FORMAT_2_MSB /*!< GETMXDS CCC Format 2 is used, MaxRdTurn field + in response, MSB = RDTURN[7:0] */ +/** + * @} + */ + +/** @defgroup I3C_TURNAROUND_TIME_TSCO TURNAROUND TIME TSCO + * @{ + */ +#define HAL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS LL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS +/*!< clock-to-data turnaround time tSCO <= 12ns */ +#define HAL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS LL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS +/*!< clock-to-data turnaround time tSCO > 12ns */ +/** + * @} + */ + +/** @defgroup I3C_COMMON_INTERRUPT I3C COMMON INTERRUPT + * @{ + */ +#define HAL_I3C_IT_TXFNFIE LL_I3C_IER_TXFNFIE /*!< Tx FIFO not full interrupt enable */ +#define HAL_I3C_IT_RXFNEIE LL_I3C_IER_RXFNEIE /*!< Rx FIFO not empty interrupt enable */ +#define HAL_I3C_IT_FCIE LL_I3C_IER_FCIE /*!< Frame complete interrupt enable */ +#define HAL_I3C_IT_ERRIE LL_I3C_IER_ERRIE /*!< Error interrupt enable */ +#define HAL_I3C_ALL_COMMON_ITS (uint32_t)(LL_I3C_IER_TXFNFIE | LL_I3C_IER_RXFNEIE | \ + LL_I3C_IER_FCIE | LL_I3C_IER_ERRIE) +/** + * @} + */ + +/** @defgroup I3C_TARGET_INTERRUPT I3C TARGET INTERRUPT + * @{ + */ +#define HAL_I3C_IT_IBIENDIE LL_I3C_IER_IBIENDIE /*!< IBI end interrupt enable */ +#define HAL_I3C_IT_CRUPDIE LL_I3C_IER_CRUPDIE /*!< controller-role update interrupt enable */ +#define HAL_I3C_IT_WKPIE LL_I3C_IER_WKPIE /*!< wakeup interrupt enable */ +#define HAL_I3C_IT_GETIE LL_I3C_IER_GETIE /*!< GETxxx CCC interrupt enable */ +#define HAL_I3C_IT_STAIE LL_I3C_IER_STAIE /*!< GETSTATUS CCC interrupt enable */ +#define HAL_I3C_IT_DAUPDIE LL_I3C_IER_DAUPDIE /*!< ENTDAA/RSTDAA/SETNEWDA CCC interrupt enable */ +#define HAL_I3C_IT_MWLUPDIE LL_I3C_IER_MWLUPDIE /*!< SETMWL CCC interrupt enable */ +#define HAL_I3C_IT_MRLUPDIE LL_I3C_IER_MRLUPDIE /*!< SETMRL CCC interrupt enable */ +#define HAL_I3C_IT_RSTIE LL_I3C_IER_RSTIE /*!< reset pattern interrupt enable */ +#define HAL_I3C_IT_ASUPDIE LL_I3C_IER_ASUPDIE /*!< ENTASx CCC interrupt enable */ +#define HAL_I3C_IT_INTUPDIE LL_I3C_IER_INTUPDIE /*!< ENEC/DISEC CCC interrupt enable */ +#define HAL_I3C_IT_DEFIE (LL_I3C_IER_DEFIE | LL_I3C_IER_RXFNEIE) +/*!< DEFTGTS CCC interrupt enable */ +#define HAL_I3C_IT_GRPIE (LL_I3C_IER_GRPIE | LL_I3C_IER_RXFNEIE) +/*!< DEFGRPA CCC interrupt enable */ +#define HAL_I3C_ALL_TGT_ITS (uint32_t)(LL_I3C_IER_IBIENDIE | LL_I3C_IER_CRUPDIE | LL_I3C_IER_WKPIE | \ + LL_I3C_IER_GETIE | LL_I3C_IER_STAIE | LL_I3C_IER_DAUPDIE | \ + LL_I3C_IER_MWLUPDIE | LL_I3C_IER_MRLUPDIE | LL_I3C_IER_RSTIE | \ + LL_I3C_IER_ASUPDIE | LL_I3C_IER_INTUPDIE | LL_I3C_IER_DEFIE | \ + LL_I3C_IER_GRPIE) +/** + * @} + */ + +/** @defgroup I3C_CONTROLLER_INTERRUPT I3C CONTROLLER INTERRUPT + * @{ + */ +#define HAL_I3C_IT_CFNFIE LL_I3C_IER_CFNFIE /*!< Control FIFO not full interrupt enable */ +#define HAL_I3C_IT_SFNEIE LL_I3C_IER_SFNEIE /*!< Status FIFO not empty interrupt enable */ +#define HAL_I3C_IT_HJIE LL_I3C_IER_HJIE /*!< Hot-join interrupt enable */ +#define HAL_I3C_IT_CRIE LL_I3C_IER_CRIE /*!< Controller-role request interrupt enable */ +#define HAL_I3C_IT_IBIIE LL_I3C_IER_IBIIE /*!< IBI request interrupt enable */ +#define HAL_I3C_IT_RXTGTENDIE LL_I3C_IER_RXTGTENDIE /*!< Target-initiated read end interrupt enable */ +#define HAL_I3C_ALL_CTRL_ITS (uint32_t)(LL_I3C_IER_CFNFIE | LL_I3C_IER_SFNEIE | LL_I3C_IER_HJIE | \ + LL_I3C_IER_CRIE | LL_I3C_IER_IBIIE | LL_I3C_IER_RXTGTENDIE) +/** + * @} + */ + +/** @defgroup I3C_FLAGS I3C FLAGS + * @{ + */ +#define HAL_I3C_FLAG_CFEF LL_I3C_EVR_CFEF /*!< Control FIFO not empty flag */ +#define HAL_I3C_FLAG_TXFEF LL_I3C_EVR_TXFEF /*!< Tx FIFO empty flag */ +#define HAL_I3C_FLAG_CFNFF LL_I3C_EVR_CFNFF /*!< Control FIFO not full flag */ +#define HAL_I3C_FLAG_SFNEF LL_I3C_EVR_SFNEF /*!< Status FIFO not empty flag */ +#define HAL_I3C_FLAG_TXFNFF LL_I3C_EVR_TXFNFF /*!< Tx FIFO not full flag */ +#define HAL_I3C_FLAG_RXFNEF LL_I3C_EVR_RXFNEF /*!< Rx FIFO not empty flag */ +#define HAL_I3C_FLAG_RXLASTF LL_I3C_EVR_RXLASTF /*!< Last read data byte/word flag */ +#define HAL_I3C_FLAG_TXLASTF LL_I3C_EVR_TXLASTF /*!< Last written data byte/word flag */ +#define HAL_I3C_FLAG_FCF LL_I3C_EVR_FCF /*!< Frame complete flag */ +#define HAL_I3C_FLAG_RXTGTENDF LL_I3C_EVR_RXTGTENDF /*!< Target-initiated read end flag */ +#define HAL_I3C_FLAG_ERRF LL_I3C_EVR_ERRF /*!< Error flag */ +#define HAL_I3C_FLAG_IBIF LL_I3C_EVR_IBIF /*!< IBI request flag */ +#define HAL_I3C_FLAG_IBIENDF LL_I3C_EVR_IBIENDF /*!< IBI end flag */ +#define HAL_I3C_FLAG_CRF LL_I3C_EVR_CRF /*!< Controller-role request flag */ +#define HAL_I3C_FLAG_CRUPDF LL_I3C_EVR_CRUPDF /*!< Controller-role update flag */ +#define HAL_I3C_FLAG_HJF LL_I3C_EVR_HJF /*!< Hot-join flag */ +#define HAL_I3C_FLAG_WKPF LL_I3C_EVR_WKPF /*!< Wakeup flag */ +#define HAL_I3C_FLAG_GETF LL_I3C_EVR_GETF /*!< GETxxx CCC flag */ +#define HAL_I3C_FLAG_STAF LL_I3C_EVR_STAF /*!< Format 1 GETSTATUS CCC flag */ +#define HAL_I3C_FLAG_DAUPDF LL_I3C_EVR_DAUPDF /*!< ENTDAA/RSTDAA/SETNEWDA CCC flag */ +#define HAL_I3C_FLAG_MWLUPDF LL_I3C_EVR_MWLUPDF /*!< SETMWL CCC flag */ +#define HAL_I3C_FLAG_MRLUPDF LL_I3C_EVR_MRLUPDF /*!< SETMRL CCC flag */ +#define HAL_I3C_FLAG_RSTF LL_I3C_EVR_RSTF /*!< Reset pattern flag */ +#define HAL_I3C_FLAG_ASUPDF LL_I3C_EVR_ASUPDF /*!< ENTASx CCC flag */ +#define HAL_I3C_FLAG_INTUPDF LL_I3C_EVR_INTUPDF /*!< ENEC/DISEC CCC flag */ +#define HAL_I3C_FLAG_DEFF LL_I3C_EVR_DEFF /*!< DEFTGTS CCC flag */ +#define HAL_I3C_FLAG_GRPF LL_I3C_EVR_GRPF /*!< DEFGRPA CCC flag */ +/** + * @} + */ + +/** @defgroup I3C_BCR_IN_PAYLOAD I3C BCR IN PAYLOAD + * @{ + */ +#define HAL_I3C_BCR_IN_PAYLOAD_SHIFT 48 /*!< BCR field in target payload */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ---------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Exported_Macros I3C Exported Macros + * @{ + */ + +/** @brief Reset I3C handle state. + * @param __HANDLE__ specifies the I3C Handle. + * @retval None + */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1) +#define __HAL_I3C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I3C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I3C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I3C_STATE_RESET) +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I3C interrupt. + * @param __HANDLE__ specifies the I3C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one value or a combination of the following group's values: + * @arg @ref I3C_CONTROLLER_INTERRUPT + * @arg @ref I3C_TARGET_INTERRUPT + * @arg @ref I3C_COMMON_INTERRUPT + * @retval None + */ +#define __HAL_I3C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disable the specified I3C interrupt. + * @param __HANDLE__ specifies the I3C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one value or a combination of the following group's values: + * @arg @ref I3C_CONTROLLER_INTERRUPT + * @arg @ref I3C_TARGET_INTERRUPT + * @arg @ref I3C_COMMON_INTERRUPT + * @retval None + */ +#define __HAL_I3C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I3C flag is set or not. + * @param __HANDLE__ specifies the I3C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one value of the group @arg @ref I3C_FLAGS values. + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_I3C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->EVR) &\ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Get Bus Characterics in payload (64bits) receive during ENTDAA procedure. + * @param __PAYLOAD__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFFFFFFFF. + * @retval The value of BCR Return value between Min_Data=0x00 and Max_Data=0xFF. + */ +#define __HAL_I3C_GET_BCR(__PAYLOAD__) (((uint32_t)((uint64_t)(__PAYLOAD__) >> HAL_I3C_BCR_IN_PAYLOAD_SHIFT)) & \ + I3C_BCR_BCR) + +/** @brief Check IBI request capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The state of IBI request capabilities (ENABLE or DISABLE). + */ +#define __HAL_I3C_GET_IBI_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR1_Msk) >> I3C_BCR_BCR1_Pos) == 1U) \ + ? ENABLE : DISABLE) + +/** @brief Check IBI additional data byte capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The state of IBI additional data byte capabilities (ENABLE or DISABLE). + */ +#define __HAL_I3C_GET_IBI_PAYLOAD(__BCR__) (((((__BCR__) & I3C_BCR_BCR2_Msk) >> I3C_BCR_BCR2_Pos) == 1U) \ + ? ENABLE : DISABLE) + +/** @brief Check Controller role request capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The state of Controller role request capabilities (ENABLE or DISABLE). + */ +#define __HAL_I3C_GET_CR_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR6_Msk) >> I3C_BCR_BCR6_Pos) == 1U) \ + ? ENABLE : DISABLE) + +/** + * @} + */ + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @addtogroup I3C_Exported_Functions + * @{ + */ + +/** @addtogroup I3C_Exported_Functions_Group1 Initialization and de-initialization functions. + * @{ + */ +HAL_StatusTypeDef HAL_I3C_Init(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_DeInit(I3C_HandleTypeDef *hi3c); +void HAL_I3C_MspInit(I3C_HandleTypeDef *hi3c); +void HAL_I3C_MspDeInit(I3C_HandleTypeDef *hi3c); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group2 Interrupt and callback functions. + * @{ + */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_I3C_RegisterCallback(I3C_HandleTypeDef *hi3c, + HAL_I3C_CallbackIDTypeDef callbackID, + pI3C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I3C_RegisterNotifyCallback(I3C_HandleTypeDef *hi3c, + pI3C_NotifyCallbackTypeDef pNotifyCallback); +HAL_StatusTypeDef HAL_I3C_RegisterTgtReqDynamicAddrCallback(I3C_HandleTypeDef *hi3c, + pI3C_TgtReqDynamicAddrCallbackTypeDef pTgtReqAddrCallback); +HAL_StatusTypeDef HAL_I3C_RegisterTgtHotJoinCallback(I3C_HandleTypeDef *hi3c, + pI3C_TgtHotJoinCallbackTypeDef pTgtHotJoinCallback); +HAL_StatusTypeDef HAL_I3C_UnRegisterCallback(I3C_HandleTypeDef *hi3c, HAL_I3C_CallbackIDTypeDef callbackID); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + +HAL_StatusTypeDef HAL_I3C_ActivateNotification(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, + uint32_t interruptMask); +HAL_StatusTypeDef HAL_I3C_DeactivateNotification(I3C_HandleTypeDef *hi3c, uint32_t interruptMask); +void HAL_I3C_CtrlTxCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_CtrlRxCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_CtrlMultipleXferCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_CtrlDAACpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_TgtReqDynamicAddrCallback(I3C_HandleTypeDef *hi3c, uint64_t targetPayload); +void HAL_I3C_TgtTxCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_TgtRxCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_TgtHotJoinCallback(I3C_HandleTypeDef *hi3c, uint8_t dynamicAddress); +void HAL_I3C_NotifyCallback(I3C_HandleTypeDef *hi3c, uint32_t eventId); +void HAL_I3C_AbortCpltCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_ErrorCallback(I3C_HandleTypeDef *hi3c); +void HAL_I3C_ER_IRQHandler(I3C_HandleTypeDef *hi3c); +void HAL_I3C_EV_IRQHandler(I3C_HandleTypeDef *hi3c); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group3 Configuration functions. + * @{ + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_BusCharacteristicConfig(I3C_HandleTypeDef *hi3c, + const LL_I3C_CtrlBusConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_I3C_Tgt_BusCharacteristicConfig(I3C_HandleTypeDef *hi3c, + const LL_I3C_TgtBusConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_I3C_SetConfigFifo(I3C_HandleTypeDef *hi3c, const I3C_FifoConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_I3C_Ctrl_Config(I3C_HandleTypeDef *hi3c, const I3C_CtrlConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_I3C_Tgt_Config(I3C_HandleTypeDef *hi3c, const I3C_TgtConfTypeDef *pConfig); +HAL_StatusTypeDef HAL_I3C_Ctrl_ConfigBusDevices(I3C_HandleTypeDef *hi3c, + const I3C_DeviceConfTypeDef *pDesc, + uint8_t nbDevice); +HAL_StatusTypeDef HAL_I3C_AddDescToFrame(I3C_HandleTypeDef *hi3c, + const I3C_CCCTypeDef *pCCCDesc, + const I3C_PrivateTypeDef *pPrivateDesc, + I3C_XferTypeDef *pXferData, + uint8_t nbFrame, + uint32_t option); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group4 FIFO Management functions. + * @{ + */ +HAL_StatusTypeDef HAL_I3C_FlushAllFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_FlushTxFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_FlushRxFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_FlushControlFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_FlushStatusFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_ClearConfigFifo(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_GetConfigFifo(I3C_HandleTypeDef *hi3c, I3C_FifoConfTypeDef *pConfig); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group5 Controller operational functions. + * @{ + */ +/* Controller transmit direct write or a broadcast CCC command APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); + +/* Controller transmit direct read CCC command APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); + +/* Controller private write APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); + +/* Controller private read APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); + +/* Controller multiple Direct CCC Command, I3C private or I2C transfer APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_MultipleTransfer_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Ctrl_MultipleTransfer_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData); + +/* Controller assign dynamic address APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_SetDynAddr(I3C_HandleTypeDef *hi3c, uint8_t devAddress); +HAL_StatusTypeDef HAL_I3C_Ctrl_DynAddrAssign_IT(I3C_HandleTypeDef *hi3c, uint32_t dynOption); +HAL_StatusTypeDef HAL_I3C_Ctrl_DynAddrAssign(I3C_HandleTypeDef *hi3c, + uint64_t *target_payload, + uint32_t dynOption, + uint32_t timeout); +/* Controller check device ready APIs */ +HAL_StatusTypeDef HAL_I3C_Ctrl_IsDeviceI3C_Ready(I3C_HandleTypeDef *hi3c, + uint8_t devAddress, + uint32_t trials, + uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Ctrl_IsDeviceI2C_Ready(I3C_HandleTypeDef *hi3c, + uint8_t devAddress, + uint32_t trials, + uint32_t timeout); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group6 Target operational functions. + * @{ + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit_IT(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit_DMA(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Tgt_Receive(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Tgt_Receive_IT(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Tgt_Receive_DMA(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData); +HAL_StatusTypeDef HAL_I3C_Tgt_ControlRoleReq(I3C_HandleTypeDef *hi3c, uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Tgt_ControlRoleReq_IT(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_Tgt_HotJoinReq(I3C_HandleTypeDef *hi3c, uint8_t *pAddress, uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Tgt_HotJoinReq_IT(I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_Tgt_IBIReq(I3C_HandleTypeDef *hi3c, const uint8_t *pPayload, + uint8_t payloadSize, uint32_t timeout); +HAL_StatusTypeDef HAL_I3C_Tgt_IBIReq_IT(I3C_HandleTypeDef *hi3c, const uint8_t *pPayload, uint8_t payloadSize); +/** + * @} + */ + +/** @addtogroup I3C_Exported_Functions_Group7 Generic and Common functions. + * @{ + */ +HAL_StatusTypeDef HAL_I3C_Abort_IT(I3C_HandleTypeDef *hi3c); +HAL_I3C_StateTypeDef HAL_I3C_GetState(const I3C_HandleTypeDef *hi3c); +HAL_I3C_ModeTypeDef HAL_I3C_GetMode(const I3C_HandleTypeDef *hi3c); +uint32_t HAL_I3C_GetError(const I3C_HandleTypeDef *hi3c); +HAL_StatusTypeDef HAL_I3C_GetCCCInfo(I3C_HandleTypeDef *hi3c, + uint32_t notifyId, + I3C_CCCInfoTypeDef *pCCCInfo); +HAL_StatusTypeDef HAL_I3C_Get_ENTDAA_Payload_Info(I3C_HandleTypeDef *hi3c, + uint64_t ENTDAA_payload, + I3C_ENTDAAPayloadTypeDef *pENTDAA_payload); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants -------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Private_Constants I3C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Private_Macro I3C Private Macros + * @{ + */ +#define IS_I3C_MODE(__MODE__) (((__MODE__) == HAL_I3C_MODE_NONE) || \ + ((__MODE__) == HAL_I3C_MODE_CONTROLLER) || \ + ((__MODE__) == HAL_I3C_MODE_TARGET)) + +#define IS_I3C_INTERRUPTMASK(__MODE__, __ITMASK__) (((__MODE__) == HAL_I3C_MODE_CONTROLLER) ? \ + ((((__ITMASK__) & HAL_I3C_ALL_CTRL_ITS) != 0x0U) || \ + (((__ITMASK__) & HAL_I3C_ALL_COMMON_ITS) != 0x0U)) : \ + ((((__ITMASK__) & HAL_I3C_ALL_TGT_ITS) != 0x0U) || \ + (((__ITMASK__) & HAL_I3C_ALL_COMMON_ITS) != 0x0U))) + +#define IS_I3C_ENTDAA_OPTION(__OPTION__) (((__OPTION__) == I3C_RSTDAA_THEN_ENTDAA) || \ + ((__OPTION__) == I3C_ONLY_ENTDAA)) + +#define IS_I3C_SDAHOLDTIME_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_SDA_HOLD_TIME_0_5) || \ + ((__VALUE__) == HAL_I3C_SDA_HOLD_TIME_1_5)) + +#define IS_I3C_WAITTIME_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_OWN_ACTIVITY_STATE_0) || \ + ((__VALUE__) == HAL_I3C_OWN_ACTIVITY_STATE_1) || \ + ((__VALUE__) == HAL_I3C_OWN_ACTIVITY_STATE_2) || \ + ((__VALUE__) == HAL_I3C_OWN_ACTIVITY_STATE_3)) + +#define IS_I3C_TXFIFOTHRESHOLD_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_TXFIFO_THRESHOLD_1_4) || \ + ((__VALUE__) == HAL_I3C_TXFIFO_THRESHOLD_4_4)) + +#define IS_I3C_RXFIFOTHRESHOLD_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_RXFIFO_THRESHOLD_1_4) || \ + ((__VALUE__) == HAL_I3C_RXFIFO_THRESHOLD_4_4)) + +#define IS_I3C_CONTROLFIFOSTATE_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_CONTROLFIFO_DISABLE) || \ + ((__VALUE__) == HAL_I3C_CONTROLFIFO_ENABLE)) + +#define IS_I3C_STATUSFIFOSTATE_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_STATUSFIFO_DISABLE) || \ + ((__VALUE__) == HAL_I3C_STATUSFIFO_ENABLE)) + +#define IS_I3C_DEVICE_VALUE(__VALUE__) (((__VALUE__) >= 1U) && ((__VALUE__) <= 4U)) + +#define IS_I3C_DYNAMICADDRESS_VALUE(__VALUE__) ((__VALUE__) <= 0x7FU) + +#define IS_I3C_FUNCTIONALSTATE_VALUE(__VALUE__) (((__VALUE__) == DISABLE) || \ + ((__VALUE__) == ENABLE)) + +#define IS_I3C_HANDOFFACTIVITYSTATE_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_HANDOFF_ACTIVITY_STATE_0) || \ + ((__VALUE__) == HAL_I3C_HANDOFF_ACTIVITY_STATE_1) || \ + ((__VALUE__) == HAL_I3C_HANDOFF_ACTIVITY_STATE_2) || \ + ((__VALUE__) == HAL_I3C_HANDOFF_ACTIVITY_STATE_3)) + +#define IS_I3C_TSCOTIME_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS) || \ + ((__VALUE__) == HAL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS)) + +#define IS_I3C_MAXSPEEDDATA_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_GETMXDS_FORMAT_1 ) || \ + ((__VALUE__) == HAL_I3C_GETMXDS_FORMAT_2_LSB) || \ + ((__VALUE__) == HAL_I3C_GETMXDS_FORMAT_2_MID) || \ + ((__VALUE__) == HAL_I3C_GETMXDS_FORMAT_2_MSB)) + +#define IS_I3C_IBIPAYLOADSIZE_VALUE(__VALUE__) (((__VALUE__) == HAL_I3C_PAYLOAD_EMPTY ) || \ + ((__VALUE__) == HAL_I3C_PAYLOAD_1_BYTE ) || \ + ((__VALUE__) == HAL_I3C_PAYLOAD_2_BYTES) || \ + ((__VALUE__) == HAL_I3C_PAYLOAD_3_BYTES) || \ + ((__VALUE__) == HAL_I3C_PAYLOAD_4_BYTES)) + +#define IS_I3C_MIPIIDENTIFIER_VALUE(__VALUE__) ((__VALUE__) <= 0x0FU) + +#define IS_I3C_MAXREADTURNARROUND_VALUE(__VALUE__) ((__VALUE__) <= 0xFFU) + +#define I3C_CHECK_IT_SOURCE(__IER__, __IT__) ((((__IER__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define I3C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +#define IS_I3C_DMASOURCEBYTE_VALUE(__VALUE__) ((__VALUE__) == DMA_SRC_DATAWIDTH_BYTE) + +#define IS_I3C_DMASOURCEWORD_VALUE(__VALUE__) ((__VALUE__) == DMA_SRC_DATAWIDTH_WORD) + +#define IS_I3C_DMADESTINATIONBYTE_VALUE(__VALUE__) ((__VALUE__) == DMA_DEST_DATAWIDTH_BYTE) + +#define IS_I3C_DMADESTINATIONWORD_VALUE(__VALUE__) ((__VALUE__) == DMA_DEST_DATAWIDTH_WORD) + +#define I3C_GET_DMA_REMAIN_DATA(__HANDLE__) (__HAL_DMA_GET_COUNTER(__HANDLE__) + HAL_DMAEx_GetFifoLevel(__HANDLE__)) + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Private_Functions I3C Private Functions + * @{ + */ +/* Private functions are defined in stm32h7rsxx_hal_i3c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_I3C_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_icache.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_icache.h new file mode 100644 index 000000000..8cc7ddce9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_icache.h @@ -0,0 +1,216 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_icache.h + * @author MCD Application Team + * @brief Header file of ICACHE HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion ------------------------------------*/ +#ifndef STM32H7RSxx_HAL_ICACHE_H +#define STM32H7RSxx_HAL_ICACHE_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes -----------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(ICACHE) +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup ICACHE + * @{ + */ + +/* Exported types -----------------------------------------------------------*/ + +/* Exported constants -------------------------------------------------------*/ +/** @defgroup ICACHE_Exported_Constants ICACHE Exported Constants + * @{ + */ + +/** @defgroup ICACHE_WaysSelection Ways selection + * @{ + */ +#define ICACHE_1WAY 0U /*!< 1-way cache (direct mapped cache) */ +#define ICACHE_4WAYS ICACHE_CR_WAYSEL /*!< 4-ways set associative cache (default) */ +/** + * @} + */ + +/** @defgroup ICACHE_Monitor_Type Monitor type + * @{ + */ +#define ICACHE_MONITOR_HIT_MISS (ICACHE_CR_HITMEN | ICACHE_CR_MISSMEN) /*!< Hit & Miss monitoring */ +#define ICACHE_MONITOR_HIT ICACHE_CR_HITMEN /*!< Hit monitoring */ +#define ICACHE_MONITOR_MISS ICACHE_CR_MISSMEN /*!< Miss monitoring */ +/** + * @} + */ + + +/** @defgroup ICACHE_Interrupts Interrupts + * @{ + */ +#define ICACHE_IT_BUSYEND ICACHE_IER_BSYENDIE /*!< Busy end interrupt */ +#define ICACHE_IT_ERROR ICACHE_IER_ERRIE /*!< Cache error interrupt */ +/** + * @} + */ + +/** @defgroup ICACHE_Flags Flags + * @{ + */ +#define ICACHE_FLAG_BUSY ICACHE_SR_BUSYF /*!< Busy flag */ +#define ICACHE_FLAG_BUSYEND ICACHE_SR_BSYENDF /*!< Busy end flag */ +#define ICACHE_FLAG_ERROR ICACHE_SR_ERRF /*!< Cache error flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ----------------------------------------------------------*/ +/** @defgroup ICACHE_Exported_Macros ICACHE Exported Macros + * @{ + */ + +/** @defgroup ICACHE_Flags_Interrupts_Management Flags and Interrupts Management + * @brief macros to manage the specified ICACHE flags and interrupts. + * @{ + */ + +/** @brief Enable ICACHE interrupts. + * @param __INTERRUPT__ specifies the ICACHE interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref ICACHE_IT_BUSYEND Busy end interrupt + * @arg @ref ICACHE_IT_ERROR Cache error interrupt + */ +#define __HAL_ICACHE_ENABLE_IT(__INTERRUPT__) SET_BIT(ICACHE->IER, (__INTERRUPT__)) + +/** @brief Disable ICACHE interrupts. + * @param __INTERRUPT__ specifies the ICACHE interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref ICACHE_IT_BUSYEND Busy end interrupt + * @arg @ref ICACHE_IT_ERROR Cache error interrupt + */ +#define __HAL_ICACHE_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(ICACHE->IER, (__INTERRUPT__)) + +/** @brief Check whether the specified ICACHE interrupt source is enabled or not. + * @param __INTERRUPT__ specifies the ICACHE interrupt source to check. + * This parameter can be any combination of the following values: + * @arg @ref ICACHE_IT_BUSYEND Busy end interrupt + * @arg @ref ICACHE_IT_ERROR Cache error interrupt + * @retval The state of __INTERRUPT__ (0 or 1). + */ +#define __HAL_ICACHE_GET_IT_SOURCE(__INTERRUPT__) \ + ((READ_BIT(ICACHE->IER, (__INTERRUPT__)) == (__INTERRUPT__)) ? 1U : 0U) + +/** @brief Check whether the selected ICACHE flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref ICACHE_FLAG_BUSY Busy flag + * @arg @ref ICACHE_FLAG_BUSYEND Busy end flag + * @arg @ref ICACHE_FLAG_ERROR Cache error flag + * @retval The state of __FLAG__ (0 or 1). + */ +#define __HAL_ICACHE_GET_FLAG(__FLAG__) ((READ_BIT(ICACHE->SR, (__FLAG__)) != 0U) ? 1U : 0U) + +/** @brief Clear the selected ICACHE flags. + * @param __FLAG__ specifies the ICACHE flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref ICACHE_FLAG_BUSYEND Busy end flag + * @arg @ref ICACHE_FLAG_ERROR Cache error flag + */ +#define __HAL_ICACHE_CLEAR_FLAG(__FLAG__) WRITE_REG(ICACHE->FCR, (__FLAG__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @addtogroup ICACHE_Exported_Functions + * @{ + */ + +/** @addtogroup ICACHE_Exported_Functions_Group1 + * @brief Initialization and control functions + * @{ + */ +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_ICACHE_Enable(void); +HAL_StatusTypeDef HAL_ICACHE_Disable(void); +uint32_t HAL_ICACHE_IsEnabled(void); +HAL_StatusTypeDef HAL_ICACHE_ConfigAssociativityMode(uint32_t AssociativityMode); +HAL_StatusTypeDef HAL_ICACHE_DeInit(void); + +/******* Invalidate in blocking mode (Polling) */ +HAL_StatusTypeDef HAL_ICACHE_Invalidate(void); +/******* Invalidate in non-blocking mode (Interrupt) */ +HAL_StatusTypeDef HAL_ICACHE_Invalidate_IT(void); +/******* Wait for Invalidate complete in blocking mode (Polling) */ +HAL_StatusTypeDef HAL_ICACHE_WaitForInvalidateComplete(void); + +/******* Performance instruction cache monitoring functions */ +HAL_StatusTypeDef HAL_ICACHE_Monitor_Start(uint32_t MonitorType); +HAL_StatusTypeDef HAL_ICACHE_Monitor_Stop(uint32_t MonitorType); +HAL_StatusTypeDef HAL_ICACHE_Monitor_Reset(uint32_t MonitorType); +uint32_t HAL_ICACHE_Monitor_GetHitValue(void); +uint32_t HAL_ICACHE_Monitor_GetMissValue(void); + +/** + * @} + */ + +/** @addtogroup ICACHE_Exported_Functions_Group2 + * @brief IRQ and callback functions + * @{ + */ +/******* IRQHandler and Callbacks used in non-blocking mode (Interrupt) */ +void HAL_ICACHE_IRQHandler(void); +void HAL_ICACHE_InvalidateCompleteCallback(void); +void HAL_ICACHE_ErrorCallback(void); + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* ICACHE */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_ICACHE_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda.h new file mode 100644 index 000000000..04703a7f9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda.h @@ -0,0 +1,900 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_irda.h + * @author MCD Application Team + * @brief Header file of IRDA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_IRDA_H +#define STM32H7RSxx_HAL_IRDA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hirda->Init.BaudRate))) + where usart_ker_ckpres is the IRDA input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the IRDA clock source. + This parameter can be a value of @ref IRDA_ClockPrescaler. */ + +} IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State definition + * @note HAL IRDA State value is a combination of 2 different substates: + * gState and RxState (see @ref IRDA_State_Definition). + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA clock sources definition + */ +typedef enum +{ + IRDA_CLOCKSOURCE_PLL2Q = 0x14U, /*!< PLL2Q clock source */ + IRDA_CLOCKSOURCE_PLL3Q = 0x18U, /*!< PLL3Q clock source */ + IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + IRDA_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + IRDA_CLOCKSOURCE_CSI = 0x08U, /*!< CSI clock source */ + IRDA_CLOCKSOURCE_LSE = 0x10U, /*!< LSE clock source */ + IRDA_CLOCKSOURCE_UNDEFINED = 0x20U /*!< Undefined clock source */ +} IRDA_ClockSourceTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +typedef struct __IRDA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + uint16_t Mask; /*!< USART RX RDR register mask */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */ + + void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */ + + void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */ + + void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */ + + void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */ + + void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */ + + + void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */ + + void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +} IRDA_HandleTypeDef; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief HAL IRDA Callback ID enumeration definition + */ +typedef enum +{ + HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */ + HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */ + HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */ + HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */ + HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */ + HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */ + HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */ + HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */ + + HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */ + HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */ + +} HAL_IRDA_CallbackIDTypeDef; + +/** + * @brief HAL IRDA Callback pointer definition + */ +typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */ + +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported Constants + * @{ + */ + +/** @defgroup IRDA_State_Definition IRDA State Code Definition + * @{ + */ +#define HAL_IRDA_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_BUSY 0x00000024U /*!< An internal process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between + gState and RxState values */ +#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup IRDA_Error_Definition IRDA Error Code Definition + * @{ + */ +#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +#define HAL_IRDA_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE 0x00000000U /*!< No parity */ +#define IRDA_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX USART_CR1_RE /*!< RX mode */ +#define IRDA_MODE_TX USART_CR1_TE /*!< TX mode */ +#define IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL 0x00000000U /*!< IRDA normal power mode */ +#define IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP /*!< IRDA low power mode */ +/** + * @} + */ + +/** @defgroup IRDA_ClockPrescaler IRDA Clock Prescaler + * @{ + */ +#define IRDA_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define IRDA_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define IRDA_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define IRDA_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define IRDA_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define IRDA_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define IRDA_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define IRDA_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define IRDA_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define IRDA_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define IRDA_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define IRDA_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE 0x00000000U /*!< IRDA disabled */ +#define IRDA_STATE_ENABLE USART_CR1_UE /*!< IRDA enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE 0x00000000U /*!< Associated UART disabled in IRDA mode */ +#define IRDA_MODE_ENABLE USART_CR3_IREN /*!< Associated UART enabled in IRDA mode */ +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disabled */ +#define IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE 0x00000000U /*!< IRDA DMA TX disabled */ +#define IRDA_DMA_TX_ENABLE USART_CR3_DMAT /*!< IRDA DMA TX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE 0x00000000U /*!< IRDA DMA RX disabled */ +#define IRDA_DMA_RX_ENABLE USART_CR3_DMAR /*!< IRDA DMA RX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK USART_ISR_REACK /*!< IRDA receive enable acknowledge flag */ +#define IRDA_FLAG_TEACK USART_ISR_TEACK /*!< IRDA transmit enable acknowledge flag */ +#define IRDA_FLAG_BUSY USART_ISR_BUSY /*!< IRDA busy flag */ +#define IRDA_FLAG_ABRF USART_ISR_ABRF /*!< IRDA auto Baud rate flag */ +#define IRDA_FLAG_ABRE USART_ISR_ABRE /*!< IRDA auto Baud rate error */ +#define IRDA_FLAG_TXE USART_ISR_TXE_TXFNF /*!< IRDA transmit data register empty */ +#define IRDA_FLAG_TC USART_ISR_TC /*!< IRDA transmission complete */ +#define IRDA_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< IRDA read data register not empty */ +#define IRDA_FLAG_ORE USART_ISR_ORE /*!< IRDA overrun error */ +#define IRDA_FLAG_NE USART_ISR_NE /*!< IRDA noise error */ +#define IRDA_FLAG_FE USART_ISR_FE /*!< IRDA frame error */ +#define IRDA_FLAG_PE USART_ISR_PE /*!< IRDA parity error */ +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE 0x0028U /*!< IRDA Parity error interruption */ +#define IRDA_IT_TXE 0x0727U /*!< IRDA Transmit data register empty interruption */ +#define IRDA_IT_TC 0x0626U /*!< IRDA Transmission complete interruption */ +#define IRDA_IT_RXNE 0x0525U /*!< IRDA Read data register not empty interruption */ +#define IRDA_IT_IDLE 0x0424U /*!< IRDA Idle interruption */ + +/* Elements values convention: 000000000XXYYYYYb + - YYYYY : Interrupt source position in the XX register (5bits) + - XX : Interrupt source register (2bits) + - 01: CR1 register + - 10: CR2 register + - 11: CR3 register */ +#define IRDA_IT_ERR 0x0060U /*!< IRDA Error interruption */ + +/* Elements values convention: 0000ZZZZ00000000b + - ZZZZ : Flag position in the ISR register(4bits) */ +#define IRDA_IT_ORE 0x0300U /*!< IRDA Overrun error interruption */ +#define IRDA_IT_NE 0x0200U /*!< IRDA Noise error interruption */ +#define IRDA_IT_FE 0x0100U /*!< IRDA Frame error interruption */ +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + +/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask + * @{ + */ +#define IRDA_IT_MASK 0x001FU /*!< IRDA Interruptions flags mask */ +#define IRDA_CR_MASK 0x00E0U /*!< IRDA control register mask */ +#define IRDA_CR_POS 5U /*!< IRDA control register position */ +#define IRDA_ISR_MASK 0x1F00U /*!< IRDA ISR register mask */ +#define IRDA_ISR_POS 8U /*!< IRDA ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state. + * @param __HANDLE__ IRDA handle. + * @retval None + */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @arg @ref IRDA_CLEAR_IDLEF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag + * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref IRDA_FLAG_BUSY Busy flag + * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag + * @arg @ref IRDA_FLAG_TC Transmission Complete flag + * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag + * @arg @ref IRDA_FLAG_ORE OverRun Error flag + * @arg @ref IRDA_FLAG_NE Noise Error flag + * @arg @ref IRDA_FLAG_FE Framing Error flag + * @arg @ref IRDA_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((__HANDLE__)->Instance->CR3 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ORE OverRun Error interrupt + * @arg @ref IRDA_IT_NE Noise Error interrupt + * @arg @ref IRDA_IT_FE Framing Error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->ISR& (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>>IRDA_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified IRDA interrupt source is enabled or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((((((__INTERRUPT__) & IRDA_CR_MASK) >>IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 :(((((__INTERRUPT__) \ + & IRDA_CR_MASK) >> IRDA_CR_POS)== 0x02U)? (__HANDLE__)->Instance->CR2 :(__HANDLE__)->Instance->CR3)) \ + & (0x01U <<(((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag + * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag + * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag + * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag + * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup IRDA_Private_Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0. + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) + +/** @brief Ensure that IRDA frame parity is valid. + * @param __PARITY__ IRDA frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +/** @brief Ensure that IRDA communication mode is valid. + * @param __MODE__ IRDA communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\ + & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that IRDA power mode is valid. + * @param __MODE__ IRDA power mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +/** @brief Ensure that IRDA clock Prescaler is valid. + * @param __CLOCKPRESCALER__ IRDA clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV256)) + +/** @brief Ensure that IRDA state is valid. + * @param __STATE__ IRDA state mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +/** @brief Ensure that IRDA associated UART/USART mode is valid. + * @param __MODE__ IRDA associated UART/USART mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ + ((__MODE__) == IRDA_MODE_ENABLE)) + +/** @brief Ensure that IRDA sampling rate is valid. + * @param __ONEBIT__ IRDA sampling rate. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that IRDA DMA TX mode is valid. + * @param __DMATX__ IRDA DMA TX mode. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +/** @brief Ensure that IRDA DMA RX mode is valid. + * @param __DMARX__ IRDA DMA RX mode. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +/** @brief Ensure that IRDA request is valid. + * @param __PARAM__ IRDA request. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Include IRDA HAL Extended module */ +#include "stm32h7rsxx_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ + +/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(const IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(const IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_IRDA_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda_ex.h new file mode 100644 index 000000000..81b393849 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_irda_ex.h @@ -0,0 +1,216 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_irda_ex.h + * @author MCD Application Team + * @brief Header file of IRDA HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_IRDA_EX_H +#define STM32H7RSxx_HAL_IRDA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup IRDAEx IRDAEx + * @brief IRDA Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants + * @{ + */ + +/** @defgroup IRDAEx_Word_Length IRDAEx Word Length + * @{ + */ +#define IRDA_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long frame */ +#define IRDA_WORDLENGTH_8B 0x00000000U /*!< 8-bit long frame */ +#define IRDA_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long frame */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros + * @{ + */ + +/** @brief Report the IRDA clock source. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval IRDA clocking source, written in __CLOCKSOURCE__. + */ +/** @brief Return clock source used for USART instance used for IRDA. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval USART clocking source, written in __CLOCKSOURCE__. + */ +#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if(((__HANDLE__)->Instance == USART2) || \ + ((__HANDLE__)->Instance == USART3) || \ + ((__HANDLE__)->Instance == UART4) || \ + ((__HANDLE__)->Instance == UART5) || \ + ((__HANDLE__)->Instance == UART7) || \ + ((__HANDLE__)->Instance == UART8)) \ + { \ + switch(__HAL_RCC_GET_USART234578_SOURCE()) \ + { \ + case RCC_USART234578CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART234578CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART234578CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART234578CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + +/** @brief Compute the mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define IRDA_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** @brief Ensure that IRDA frame length is valid. + * @param __LENGTH__ IRDA frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_9B)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_IRDA_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_iwdg.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_iwdg.h new file mode 100644 index 000000000..ab6da3b62 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_iwdg.h @@ -0,0 +1,302 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_IWDG_H +#define STM32H7RSxx_HAL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup IWDG IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Types IWDG Exported Types + * @{ + */ + +/** + * @brief IWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Select the prescaler of the IWDG. + This parameter can be a value of @ref IWDG_Prescaler */ + + uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + + uint32_t Window; /*!< Specifies the window value to be compared to the down-counter. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + + uint32_t EWI; /*!< Specifies if IWDG Early Wakeup Interrupt is enable or not and the comparator value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF + value 0 means that EWI is disabled */ +} IWDG_InitTypeDef; + +/** + * @brief IWDG Handle Structure definition + */ +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) +typedef struct __IWDG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ +{ + IWDG_TypeDef *Instance; /*!< Register base address */ + + IWDG_InitTypeDef Init; /*!< IWDG required parameters */ + +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) + void (* EwiCallback)(struct __IWDG_HandleTypeDef *hiwdg); /*!< IWDG Early WakeUp Interrupt callback */ + void (* MspInitCallback)(struct __IWDG_HandleTypeDef *hiwdg); /*!< IWDG Msp Init callback */ +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ +} IWDG_HandleTypeDef; + +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL IWDG common Callback ID enumeration definition + */ +typedef enum +{ + HAL_IWDG_EWI_CB_ID = 0x00U, /*!< IWDG EWI callback ID */ + HAL_IWDG_MSPINIT_CB_ID = 0x01U, /*!< IWDG MspInit callback ID */ +} HAL_IWDG_CallbackIDTypeDef; + +/** + * @brief HAL IWDG Callback pointer definition + */ +typedef void (*pIWDG_CallbackTypeDef)(IWDG_HandleTypeDef *hppp); /*!< pointer to a IWDG common callback functions */ +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_Prescaler IWDG Prescaler + * @{ + */ +#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */ +#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */ +#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */ +#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */ +#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */ +#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */ +#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */ +#define IWDG_PRESCALER_512 (IWDG_PR_PR_2 | IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 512 */ +#define IWDG_PRESCALER_1024 IWDG_PR_PR_3 /*!< IWDG prescaler set to 1024 */ +/** + * @} + */ + +/** @defgroup IWDG_Window_option IWDG Window option + * @{ + */ +#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN +/** + * @} + */ + +/** @defgroup IWDG_EWI_Mode IWDG Early Wakeup Interrupt Mode + * @{ + */ +#define IWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */ +/** + * @} + */ + +/** @defgroup IWDG_Active_Status IWDG Active Status + * @{ + */ +#define IWDG_STATUS_DISABLE 0x00000000u +#define IWDG_STATUS_ENABLE IWDG_SR_ONF +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the IWDG peripheral. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) + +/** + * @brief Reload IWDG counter with value defined in the reload register + * (write access to IWDG_PR, IWDG_RLR, IWDG_WINR and EWCR registers disabled). + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Functions IWDG Exported Functions + * @{ + */ + +/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions + * @{ + */ +/* Initialization/Start functions ********************************************/ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); +void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_IWDG_RegisterCallback(IWDG_HandleTypeDef *hiwdg, HAL_IWDG_CallbackIDTypeDef CallbackID, + pIWDG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_IWDG_UnRegisterCallback(IWDG_HandleTypeDef *hiwdg, HAL_IWDG_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); +uint32_t HAL_IWDG_GetActiveStatus(const IWDG_HandleTypeDef *hiwdg); +void HAL_IWDG_IRQHandler(IWDG_HandleTypeDef *hiwdg); +void HAL_IWDG_EarlyWakeupCallback(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_Private_Constants IWDG Private Constants + * @{ + */ + +/** + * @brief IWDG Key Register BitMask + */ +#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */ +#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */ +#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */ +#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Macros IWDG Private Macros + * @{ + */ + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR, IWDG_WINR and EWCR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR, IWDG_WINR and EWCR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) + +/** + * @brief Check IWDG prescaler value. + * @param __PRESCALER__ IWDG prescaler value + * @retval None + */ +#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ + ((__PRESCALER__) == IWDG_PRESCALER_8) || \ + ((__PRESCALER__) == IWDG_PRESCALER_16) || \ + ((__PRESCALER__) == IWDG_PRESCALER_32) || \ + ((__PRESCALER__) == IWDG_PRESCALER_64) || \ + ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_256)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_512)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_1024)) + +/** + * @brief Check IWDG reload value. + * @param __RELOAD__ IWDG reload value + * @retval None + */ +#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL) + +/** + * @brief Check IWDG window value. + * @param __WINDOW__ IWDG window value + * @retval None + */ +#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN) + +/** + * @brief Check IWDG ewi value. + * @param __EWI__ IWDG ewi value + * @retval None + */ +#define IS_IWDG_EWI(__EWI__) ((__EWI__) <= IWDG_EWCR_EWIT) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_IWDG_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_jpeg.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_jpeg.h new file mode 100644 index 000000000..c5dc91800 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_jpeg.h @@ -0,0 +1,654 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_jpeg.h + * @author MCD Application Team + * @brief Header file of JPEG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_JPEG_H +#define STM32H7RSxx_HAL_JPEG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (JPEG) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup JPEG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup JPEG_Exported_Types JPEG Exported Types + * @{ + */ + +/** @defgroup JPEG_Configuration_Structure_definition JPEG Configuration for encoding Structure definition + * @brief JPEG encoding configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t ColorSpace; /*!< Image Color space : gray-scale, YCBCR, RGB or CMYK + This parameter can be a value of @ref JPEG_ColorSpace */ + + uint32_t ChromaSubsampling; /*!< Chroma Subsampling in case of YCBCR or CMYK color space, 0-> 4:4:4 , 1-> 4:2:2, 2 -> 4:1:1, 3 -> 4:2:0 + This parameter can be a value of @ref JPEG_ChromaSubsampling */ + + uint32_t ImageHeight; /*!< Image height : number of lines */ + + uint32_t ImageWidth; /*!< Image width : number of pixels per line */ + + uint32_t ImageQuality; /*!< Quality of the JPEG encoding : from 1 to 100 */ + +} JPEG_ConfTypeDef; +/** + * @} + */ + +/** @defgroup HAL_JPEG_state_structure_definition HAL JPEG state structure definition + * @brief HAL JPEG State structure definition + * @{ + */ +typedef enum +{ + HAL_JPEG_STATE_RESET = 0x00U, /*!< JPEG not yet initialized or disabled */ + HAL_JPEG_STATE_READY = 0x01U, /*!< JPEG initialized and ready for use */ + HAL_JPEG_STATE_BUSY = 0x02U, /*!< JPEG internal processing is ongoing */ + HAL_JPEG_STATE_BUSY_ENCODING = 0x03U, /*!< JPEG encoding processing is ongoing */ + HAL_JPEG_STATE_BUSY_DECODING = 0x04U, /*!< JPEG decoding processing is ongoing */ + HAL_JPEG_STATE_TIMEOUT = 0x05U, /*!< JPEG timeout state */ + HAL_JPEG_STATE_ERROR = 0x06U /*!< JPEG error state */ +} HAL_JPEG_STATETypeDef; + +/** + * @} + */ + + +/** @defgroup JPEG_handle_Structure_definition JPEG handle Structure definition + * @brief JPEG handle Structure definition + * @{ + */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +typedef struct __JPEG_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_JPEG_REGISTER_CALLBACKS) */ +{ + JPEG_TypeDef *Instance; /*!< JPEG peripheral register base address */ + + JPEG_ConfTypeDef Conf; /*!< Current JPEG encoding/decoding parameters */ + + uint8_t *pJpegInBuffPtr; /*!< Pointer to JPEG processing (encoding, decoding,...) input buffer */ + + uint8_t *pJpegOutBuffPtr; /*!< Pointer to JPEG processing (encoding, decoding,...) output buffer */ + + __IO uint32_t JpegInCount; /*!< Internal Counter of input data */ + + __IO uint32_t JpegOutCount; /*!< Internal Counter of output data */ + + uint32_t InDataLength; /*!< Input Buffer Length in Bytes */ + + uint32_t OutDataLength; /*!< Output Buffer Length in Bytes */ + + DMA_HandleTypeDef *hdmain; /*!< JPEG In DMA handle parameters */ + + DMA_HandleTypeDef *hdmaout; /*!< JPEG Out DMA handle parameters */ + + uint8_t CustomQuanTable; /*!< If set to 1 specify that user customized quantization tables are used */ + + uint8_t *QuantTable0; /*!< Basic Quantization Table for component 0 */ + + uint8_t *QuantTable1; /*!< Basic Quantization Table for component 1 */ + + uint8_t *QuantTable2; /*!< Basic Quantization Table for component 2 */ + + uint8_t *QuantTable3; /*!< Basic Quantization Table for component 3 */ + + HAL_LockTypeDef Lock; /*!< JPEG locking object */ + + __IO HAL_JPEG_STATETypeDef State; /*!< JPEG peripheral state */ + + __IO uint32_t ErrorCode; /*!< JPEG Error code */ + + __IO uint32_t Context; /*!< JPEG Internal context */ + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + void (*InfoReadyCallback)(struct __JPEG_HandleTypeDef *hjpeg, + JPEG_ConfTypeDef *pInfo); /*!< JPEG Info ready callback */ + void (*EncodeCpltCallback)(struct __JPEG_HandleTypeDef + *hjpeg); /*!< JPEG Encode complete callback */ + void (*DecodeCpltCallback)(struct __JPEG_HandleTypeDef + *hjpeg); /*!< JPEG Decode complete callback */ + void (*ErrorCallback)(struct __JPEG_HandleTypeDef + *hjpeg); /*!< JPEG Error callback */ + void (*GetDataCallback)(struct __JPEG_HandleTypeDef *hjpeg, + uint32_t NbDecodedData); /*!< JPEG Get Data callback */ + void (*DataReadyCallback)(struct __JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut, + uint32_t OutDataLength); /*!< JPEG Data ready callback */ + + void (* MspInitCallback)(struct __JPEG_HandleTypeDef *hjpeg); /*!< JPEG Msp Init callback */ + void (* MspDeInitCallback)(struct __JPEG_HandleTypeDef + *hjpeg); /*!< JPEG Msp DeInit callback */ + + +#endif /* (USE_HAL_JPEG_REGISTER_CALLBACKS) */ + + +} JPEG_HandleTypeDef; +/** + * @} + */ + + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +/** @defgroup HAL_JPEG_Callback_ID_enumeration_definition HAL JPEG Callback ID enumeration definition + * @brief HAL JPEG Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_JPEG_ENCODE_CPLT_CB_ID = 0x01U, /*!< JPEG Encode Complete callback ID */ + HAL_JPEG_DECODE_CPLT_CB_ID = 0x02U, /*!< JPEG Decode Complete callback ID */ + HAL_JPEG_ERROR_CB_ID = 0x03U, /*!< JPEG Error callback ID */ + + HAL_JPEG_MSPINIT_CB_ID = 0x04U, /*!< JPEG MspInit callback ID */ + HAL_JPEG_MSPDEINIT_CB_ID = 0x05U /*!< JPEG MspDeInit callback ID */ + +} HAL_JPEG_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_JPEG_Callback_pointer_definition HAL JPEG Callback pointer definition + * @brief HAL JPEG Callback pointer definition + * @{ + */ +typedef void (*pJPEG_CallbackTypeDef)(JPEG_HandleTypeDef *hjpeg); /*!< pointer to a common JPEG callback function */ +typedef void (*pJPEG_InfoReadyCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg, + JPEG_ConfTypeDef *pInfo); /*!< pointer to an Info ready JPEG callback function */ +typedef void (*pJPEG_GetDataCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg, + uint32_t NbDecodedData); /*!< pointer to a Get data JPEG callback function */ +typedef void (*pJPEG_DataReadyCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut, + uint32_t OutDataLength); /*!< pointer to a Data ready JPEG callback function */ +/** + * @} + */ + +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup JPEG_Exported_Constants JPEG Exported Constants + * @{ + */ + +/** @defgroup JPEG_Error_Code_definition JPEG Error Code definition + * @brief JPEG Error Code definition + * @{ + */ + +#define HAL_JPEG_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_JPEG_ERROR_HUFF_TABLE ((uint32_t)0x00000001U) /*!< HUffman Table programming error */ +#define HAL_JPEG_ERROR_QUANT_TABLE ((uint32_t)0x00000002U) /*!< Quantization Table programming error */ +#define HAL_JPEG_ERROR_DMA ((uint32_t)0x00000004U) /*!< DMA transfer error */ +#define HAL_JPEG_ERROR_TIMEOUT ((uint32_t)0x00000008U) /*!< Timeout error */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +#define HAL_JPEG_ERROR_INVALID_CALLBACK ((uint32_t)0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup JPEG_Quantization_Table_Size JPEG Quantization Table Size + * @brief JPEG Quantization Table Size + * @{ + */ +#define JPEG_QUANT_TABLE_SIZE ((uint32_t)64U) /*!< JPEG Quantization Table Size in bytes */ +/** + * @} + */ + + +/** @defgroup JPEG_ColorSpace JPEG ColorSpace + * @brief JPEG Color Space + * @{ + */ +#define JPEG_GRAYSCALE_COLORSPACE ((uint32_t)0x00000000U) +#define JPEG_YCBCR_COLORSPACE JPEG_CONFR1_COLORSPACE_0 +#define JPEG_CMYK_COLORSPACE JPEG_CONFR1_COLORSPACE + + +/** + * @} + */ + + +/** @defgroup JPEG_ChromaSubsampling JPEG Chrominance Sampling + * @brief JPEG Chrominance Sampling + * @{ + */ +#define JPEG_444_SUBSAMPLING ((uint32_t)0x00000000U) /*!< Chroma Subsampling 4:4:4 */ +#define JPEG_420_SUBSAMPLING ((uint32_t)0x00000001U) /*!< Chroma Subsampling 4:2:0 */ +#define JPEG_422_SUBSAMPLING ((uint32_t)0x00000002U) /*!< Chroma Subsampling 4:2:2 */ + +/** + * @} + */ + +/** @defgroup JPEG_ImageQuality JPEG Image Quality + * @brief JPEG Min and Max Image Quality + * @{ + */ +#define JPEG_IMAGE_QUALITY_MIN ((uint32_t)1U) /*!< Minimum JPEG quality */ +#define JPEG_IMAGE_QUALITY_MAX ((uint32_t)100U) /*!< Maximum JPEG quality */ + +/** + * @} + */ + +/** @defgroup JPEG_Interrupt_configuration_definition JPEG Interrupt configuration definition + * @brief JPEG Interrupt definition + * @{ + */ +#define JPEG_IT_IFT ((uint32_t)JPEG_CR_IFTIE) /*!< Input FIFO Threshold Interrupt */ +#define JPEG_IT_IFNF ((uint32_t)JPEG_CR_IFNFIE) /*!< Input FIFO Not Full Interrupt */ +#define JPEG_IT_OFT ((uint32_t)JPEG_CR_OFTIE) /*!< Output FIFO Threshold Interrupt */ +#define JPEG_IT_OFNE ((uint32_t)JPEG_CR_OFTIE) /*!< Output FIFO Not Empty Interrupt */ +#define JPEG_IT_EOC ((uint32_t)JPEG_CR_EOCIE) /*!< End of Conversion Interrupt */ +#define JPEG_IT_HPD ((uint32_t)JPEG_CR_HPDIE) /*!< Header Parsing Done Interrupt */ +/** + * @} + */ + +/** @defgroup JPEG_Flag_definition JPEG Flag definition + * @brief JPEG Flags definition + * @{ + */ +#define JPEG_FLAG_IFTF ((uint32_t)JPEG_SR_IFTF) /*!< Input FIFO is not full and is below its threshold flag */ +#define JPEG_FLAG_IFNFF ((uint32_t)JPEG_SR_IFNFF) /*!< Input FIFO Not Full Flag, a data can be written */ +#define JPEG_FLAG_OFTF ((uint32_t)JPEG_SR_OFTF) /*!< Output FIFO is not empty and has reach its threshold */ +#define JPEG_FLAG_OFNEF ((uint32_t)JPEG_SR_OFNEF) /*!< Output FIFO is not empty, a data is available */ +#define JPEG_FLAG_EOCF ((uint32_t)JPEG_SR_EOCF) /*!< JPEG Codec core has finished the encoding or the decoding process and than last data has been sent to the output FIFO */ +#define JPEG_FLAG_HPDF ((uint32_t)JPEG_SR_HPDF) /*!< JPEG Codec has finished the parsing of the headers and the internal registers have been updated */ +#define JPEG_FLAG_COF ((uint32_t)JPEG_SR_COF) /*!< JPEG Codec operation on going flag*/ + +#define JPEG_FLAG_ALL ((uint32_t)0x000000FEU) /*!< JPEG Codec All previous flag*/ +/** + * @} + */ + +/** @defgroup JPEG_PROCESS_PAUSE_RESUME_definition JPEG Process Pause Resume definition + * @brief JPEG process pause, resume definition + * @{ + */ +#define JPEG_PAUSE_RESUME_INPUT ((uint32_t)0x00000001U) /*!< Pause/Resume Input FIFO Xfer*/ +#define JPEG_PAUSE_RESUME_OUTPUT ((uint32_t)0x00000002U) /*!< Pause/Resume Output FIFO Xfer*/ +#define JPEG_PAUSE_RESUME_INPUT_OUTPUT ((uint32_t)0x00000003U) /*!< Pause/Resume Input and Output FIFO Xfer*/ +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup JPEG_Exported_Macros JPEG Exported Macros + * @{ + */ + +/** @brief Reset JPEG handle state + * @param __HANDLE__ specifies the JPEG handle. + * @retval None + */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +#define __HAL_JPEG_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_JPEG_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_JPEG_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_JPEG_STATE_RESET) +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + +/** + * @brief Enable the JPEG peripheral. + * @param __HANDLE__ specifies the JPEG handle. + * @retval None + */ +#define __HAL_JPEG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= JPEG_CR_JCEN) + +/** + * @brief Disable the JPEG peripheral. + * @param __HANDLE__ specifies the JPEG handle. + * @retval None + */ +#define __HAL_JPEG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~JPEG_CR_JCEN) + + +/** + * @brief Check the specified JPEG status flag. + * @param __HANDLE__ specifies the JPEG handle. + * @param __FLAG__ specifies the flag to check + * This parameter can be one of the following values: + * @arg JPEG_FLAG_IFTF : The input FIFO is not full and is below its threshold flag + * @arg JPEG_FLAG_IFNFF : The input FIFO Not Full Flag, a data can be written + * @arg JPEG_FLAG_OFTF : The output FIFO is not empty and has reach its threshold + * @arg JPEG_FLAG_OFNEF : The output FIFO is not empty, a data is available + * @arg JPEG_FLAG_EOCF : JPEG Codec core has finished the encoding or the decoding process + * and than last data has been sent to the output FIFO + * @arg JPEG_FLAG_HPDF : JPEG Codec has finished the parsing of the headers + * and the internal registers have been updated + * @arg JPEG_FLAG_COF : JPEG Codec operation on going flag + * + * @retval __HAL_JPEG_GET_FLAG : returns The new state of __FLAG__ (TRUE or FALSE) + */ + +#define __HAL_JPEG_GET_FLAG(__HANDLE__,__FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__))) + +/** + * @brief Clear the specified JPEG status flag. + * @param __HANDLE__ specifies the JPEG handle. + * @param __FLAG__ specifies the flag to clear + * This parameter can be one of the following values: + * @arg JPEG_FLAG_EOCF : JPEG Codec core has finished the encoding or the decoding process + * and than last data has been sent to the output FIFO + * @arg JPEG_FLAG_HPDF : JPEG Codec has finished the parsing of the headers + * @retval None + */ + +#define __HAL_JPEG_CLEAR_FLAG(__HANDLE__,__FLAG__) (((__HANDLE__)->Instance->CFR |= ((__FLAG__) &\ + (JPEG_FLAG_EOCF | JPEG_FLAG_HPDF)))) + + +/** + * @brief Enable Interrupt. + * @param __HANDLE__ specifies the JPEG handle. + * @param __INTERRUPT__ specifies the interrupt to enable + * This parameter can be one of the following values: + * @arg JPEG_IT_IFT : Input FIFO Threshold Interrupt + * @arg JPEG_IT_IFNF : Input FIFO Not Full Interrupt + * @arg JPEG_IT_OFT : Output FIFO Threshold Interrupt + * @arg JPEG_IT_OFNE : Output FIFO Not empty Interrupt + * @arg JPEG_IT_EOC : End of Conversion Interrupt + * @arg JPEG_IT_HPD : Header Parsing Done Interrupt + * + * @retval No return + */ +#define __HAL_JPEG_ENABLE_IT(__HANDLE__,__INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__) ) + +/** + * @brief Disable Interrupt. + * @param __HANDLE__ specifies the JPEG handle. + * @param __INTERRUPT__ specifies the interrupt to disable + * This parameter can be one of the following values: + * @arg JPEG_IT_IFT : Input FIFO Threshold Interrupt + * @arg JPEG_IT_IFNF : Input FIFO Not Full Interrupt + * @arg JPEG_IT_OFT : Output FIFO Threshold Interrupt + * @arg JPEG_IT_OFNE : Output FIFO Not empty Interrupt + * @arg JPEG_IT_EOC : End of Conversion Interrupt + * @arg JPEG_IT_HPD : Header Parsing Done Interrupt + * + * @note To disable an IT we must use MODIFY_REG macro to avoid writing "1" to the FIFO flush bits + * located in the same IT enable register (CR register). + * @retval No return + */ +#define __HAL_JPEG_DISABLE_IT(__HANDLE__,__INTERRUPT__) MODIFY_REG((__HANDLE__)->Instance->CR, (__INTERRUPT__), 0UL) + + +/** + * @brief Get Interrupt state. + * @param __HANDLE__ specifies the JPEG handle. + * @param __INTERRUPT__ specifies the interrupt to check + * This parameter can be one of the following values: + * @arg JPEG_IT_IFT : Input FIFO Threshold Interrupt + * @arg JPEG_IT_IFNF : Input FIFO Not Full Interrupt + * @arg JPEG_IT_OFT : Output FIFO Threshold Interrupt + * @arg JPEG_IT_OFNE : Output FIFO Not empty Interrupt + * @arg JPEG_IT_EOC : End of Conversion Interrupt + * @arg JPEG_IT_HPD : Header Parsing Done Interrupt + * + * @retval returns The new state of __INTERRUPT__ (Enabled or disabled) + */ +#define __HAL_JPEG_GET_IT_SOURCE(__HANDLE__,__INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup JPEG_Exported_Functions + * @{ + */ + +/** @addtogroup JPEG_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_JPEG_Init(JPEG_HandleTypeDef *hjpeg); +HAL_StatusTypeDef HAL_JPEG_DeInit(JPEG_HandleTypeDef *hjpeg); +void HAL_JPEG_MspInit(JPEG_HandleTypeDef *hjpeg); +void HAL_JPEG_MspDeInit(JPEG_HandleTypeDef *hjpeg); + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_JPEG_RegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID, + pJPEG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_JPEG_UnRegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_JPEG_RegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg, + pJPEG_InfoReadyCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_JPEG_UnRegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg); + +HAL_StatusTypeDef HAL_JPEG_RegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg, pJPEG_GetDataCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_JPEG_UnRegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg); + +HAL_StatusTypeDef HAL_JPEG_RegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg, + pJPEG_DataReadyCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_JPEG_UnRegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg); + +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup JPEG_Exported_Functions_Group2 + * @{ + */ +/* Encoding/Decoding Configuration functions ********************************/ +HAL_StatusTypeDef HAL_JPEG_ConfigEncoding(JPEG_HandleTypeDef *hjpeg, const JPEG_ConfTypeDef *pConf); +HAL_StatusTypeDef HAL_JPEG_GetInfo(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo); +HAL_StatusTypeDef HAL_JPEG_EnableHeaderParsing(JPEG_HandleTypeDef *hjpeg); +HAL_StatusTypeDef HAL_JPEG_DisableHeaderParsing(JPEG_HandleTypeDef *hjpeg); +HAL_StatusTypeDef HAL_JPEG_SetUserQuantTables(JPEG_HandleTypeDef *hjpeg, uint8_t *QTable0, uint8_t *QTable1, + uint8_t *QTable2, uint8_t *QTable3); + +/** + * @} + */ + +/** @addtogroup JPEG_Exported_Functions_Group3 + * @{ + */ +/* JPEG processing functions **************************************/ +HAL_StatusTypeDef HAL_JPEG_Encode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength, uint32_t Timeout); +HAL_StatusTypeDef HAL_JPEG_Decode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength, uint32_t Timeout); +HAL_StatusTypeDef HAL_JPEG_Encode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength); +HAL_StatusTypeDef HAL_JPEG_Decode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength); +HAL_StatusTypeDef HAL_JPEG_Encode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength); +HAL_StatusTypeDef HAL_JPEG_Decode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength); +HAL_StatusTypeDef HAL_JPEG_Pause(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection); +HAL_StatusTypeDef HAL_JPEG_Resume(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection); +void HAL_JPEG_ConfigInputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewInputBuffer, uint32_t InDataLength); +void HAL_JPEG_ConfigOutputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewOutputBuffer, uint32_t OutDataLength); +HAL_StatusTypeDef HAL_JPEG_Abort(JPEG_HandleTypeDef *hjpeg); + +/** + * @} + */ + +/** @addtogroup JPEG_Exported_Functions_Group4 + * @{ + */ +/* JPEG Decode/Encode callback functions ********************************************************/ +void HAL_JPEG_InfoReadyCallback(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo); +void HAL_JPEG_EncodeCpltCallback(JPEG_HandleTypeDef *hjpeg); +void HAL_JPEG_DecodeCpltCallback(JPEG_HandleTypeDef *hjpeg); +void HAL_JPEG_ErrorCallback(JPEG_HandleTypeDef *hjpeg); +void HAL_JPEG_GetDataCallback(JPEG_HandleTypeDef *hjpeg, uint32_t NbDecodedData); +void HAL_JPEG_DataReadyCallback(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut, uint32_t OutDataLength); + +/** + * @} + */ + +/** @addtogroup JPEG_Exported_Functions_Group5 + * @{ + */ +/* JPEG IRQ handler management ******************************************************/ +void HAL_JPEG_IRQHandler(JPEG_HandleTypeDef *hjpeg); + +/** + * @} + */ + +/** @addtogroup JPEG_Exported_Functions_Group6 + * @{ + */ +/* Peripheral State and Error functions ************************************************/ +HAL_JPEG_STATETypeDef HAL_JPEG_GetState(const JPEG_HandleTypeDef *hjpeg); +uint32_t HAL_JPEG_GetError(const JPEG_HandleTypeDef *hjpeg); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup JPEG_Private_Types JPEG Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup JPEG_Private_Defines JPEG Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup JPEG_Private_Variables JPEG Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup JPEG_Private_Constants JPEG Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup JPEG_Private_Macros JPEG Private Macros + * @{ + */ + +#define IS_JPEG_CHROMASUBSAMPLING(SUBSAMPLING) (((SUBSAMPLING) == JPEG_444_SUBSAMPLING) || \ + ((SUBSAMPLING) == JPEG_420_SUBSAMPLING) || \ + ((SUBSAMPLING) == JPEG_422_SUBSAMPLING)) + +#define IS_JPEG_IMAGE_QUALITY(NUMBER) (((NUMBER) >= JPEG_IMAGE_QUALITY_MIN) && ((NUMBER) <= JPEG_IMAGE_QUALITY_MAX)) + +#define IS_JPEG_COLORSPACE(COLORSPACE) (((COLORSPACE) == JPEG_GRAYSCALE_COLORSPACE) || \ + ((COLORSPACE) == JPEG_YCBCR_COLORSPACE) || \ + ((COLORSPACE) == JPEG_CMYK_COLORSPACE)) + +#define IS_JPEG_PAUSE_RESUME_STATE(VALUE) (((VALUE) == JPEG_PAUSE_RESUME_INPUT) || \ + ((VALUE) == JPEG_PAUSE_RESUME_OUTPUT)|| \ + ((VALUE) == JPEG_PAUSE_RESUME_INPUT_OUTPUT)) + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup JPEG_Private_Functions_Prototypes JPEG Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup JPEG_Private_Functions JPEG Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* JPEG */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_JPEG_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_lptim.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_lptim.h new file mode 100644 index 000000000..94321903e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_lptim.h @@ -0,0 +1,1259 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_lptim.h + * @author MCD Application Team + * @brief Header file of LPTIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_LPTIM_H +#define STM32H7RSxx_HAL_LPTIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/* Include low level driver */ +#include "stm32h7rsxx_ll_lptim.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (LPTIM1) || defined (LPTIM2) || defined (LPTIM3) || defined (LPTIM4) || defined (LPTIM5) + +/** @addtogroup LPTIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Types LPTIM Exported Types + * @{ + */ +#define LPTIM_EXTI_LINE_LPTIM1 EXTI_IMR2_IM47 /*!< External interrupt line 47 Connected to the LPTIM1 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM2 EXTI_IMR2_IM48 /*!< External interrupt line 48 Connected to the LPTIM2 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM3 EXTI_IMR2_IM50 /*!< External interrupt line 50 Connected to the LPTIM3 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM4 EXTI_IMR2_IM52 /*!< External interrupt line 52 Connected to the LPTIM4 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM5 EXTI_IMR2_IM53 /*!< External interrupt line 53 Connected to the LPTIM5 EXTI Line */ + +/** + * @brief LPTIM Clock configuration definition + */ +typedef struct +{ + uint32_t Source; /*!< Selects the clock source. + This parameter can be a value of @ref LPTIM_Clock_Source */ + + uint32_t Prescaler; /*!< Specifies the counter clock Prescaler. + This parameter can be a value of @ref LPTIM_Clock_Prescaler */ + +} LPTIM_ClockConfigTypeDef; + +/** + * @brief LPTIM Clock configuration definition + */ +typedef struct +{ + uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit + if the ULPTIM input is selected. + Note: This parameter is used only when Ultra low power clock source is used. + Note: If the polarity is configured on 'both edges', an auxiliary clock + (one of the Low power oscillator) must be active. + This parameter can be a value of @ref LPTIM_Clock_Polarity */ + + uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter. + Note: This parameter is used only when Ultra low power clock source is used. + This parameter can be a value of @ref LPTIM_Clock_Sample_Time */ + +} LPTIM_ULPClockConfigTypeDef; + +/** + * @brief LPTIM Trigger configuration definition + */ +typedef struct +{ + uint32_t Source; /*!< Selects the Trigger source. + This parameter can be a value of @ref LPTIM_Trigger_Source */ + + uint32_t ActiveEdge; /*!< Selects the Trigger active edge. + Note: This parameter is used only when an external trigger is used. + This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */ + + uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter. + Note: This parameter is used only when an external trigger is used. + This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */ +} LPTIM_TriggerConfigTypeDef; + +/** + * @brief LPTIM Initialization Structure definition + */ +typedef struct +{ + LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */ + + LPTIM_ULPClockConfigTypeDef UltraLowPowerClock;/*!< Specifies the Ultra Low Power clock parameters */ + + LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between + Min_Data = 0x0001 and Max_Data = 0xFFFF. */ + + uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare + values is done immediately or after the end of current period. + This parameter can be a value of @ref LPTIM_Updating_Mode */ + + uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event + or each external event. + This parameter can be a value of @ref LPTIM_Counter_Source */ + + uint32_t Input1Source; /*!< Specifies source selected for input1 (GPIO or comparator output). + This parameter can be a value of @ref LPTIM_Input1_Source */ + + uint32_t Input2Source; /*!< Specifies source selected for input2 (GPIO or comparator output). + Note: This parameter is used only for encoder feature so is used only + for LPTIM1 instance. + This parameter can be a value of @ref LPTIM_Input2_Source */ + + uint32_t RepetitionCounter;/*!< Specifies the repetition counter value. + Each time the RCR downcounter reaches zero, an update event is + generated and counting restarts from the RCR value (N). + Note: When using repetition counter the UpdateMode field must be + set to LPTIM_UPDATE_ENDOFPERIOD otherwise unpredictable + behavior may occur. + This parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. */ +} LPTIM_InitTypeDef; + +/** + * @brief LPTIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref LPTIM_Output_Compare_Polarity */ +} LPTIM_OC_ConfigTypeDef; + +/** + * @brief LPTIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICInputSource; /*!< Specifies source selected for IC channel. + This parameter can be a value of @ref LPTIM_Input_Capture_Source */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref LPTIM_Input_Capture_Prescaler */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref LPTIM_Input_Capture_Polarity */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref LPTIM_Input_Capture_Filter */ +} LPTIM_IC_ConfigTypeDef; + +/** + * @brief HAL LPTIM State structure definition + */ +typedef enum +{ + HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */ +} HAL_LPTIM_StateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_LPTIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_LPTIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_LPTIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_LPTIM_ActiveChannel; + +/** + * @brief LPTIM Channel States definition + */ +typedef enum +{ + HAL_LPTIM_CHANNEL_STATE_RESET = 0x00U, /*!< LPTIM Channel initial state */ + HAL_LPTIM_CHANNEL_STATE_READY = 0x01U, /*!< LPTIM Channel ready for use */ + HAL_LPTIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the LPTIM channel */ +} HAL_LPTIM_ChannelStateTypeDef; + +/** + * @brief LPTIM handle Structure definition + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +typedef struct __LPTIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +{ + LPTIM_TypeDef *Instance; /*!< Register base address */ + + LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */ + + HAL_LPTIM_ActiveChannel Channel; /*!< Active channel */ + + DMA_HandleTypeDef *hdma[3]; /*!< DMA Handlers array, This array is accessed by a @ref LPTIM_DMA_Handle_index */ + + HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */ + + HAL_LockTypeDef Lock; /*!< LPTIM locking object */ + + __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */ + + __IO HAL_LPTIM_ChannelStateTypeDef ChannelState[2]; /*!< LPTIM channel operation state */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp Init Callback */ + void (* MspDeInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp DeInit Callback */ + void (* CompareMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare match Callback */ + void (* AutoReloadMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload match Callback */ + void (* TriggerCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< External trigger event detection Callback */ + void (* CompareWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare register write complete Callback */ + void (* AutoReloadWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload register write complete Callback */ + void (* DirectionUpCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Up-counting direction change Callback */ + void (* DirectionDownCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Down-counting direction change Callback */ + void (* UpdateEventCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Update event detection Callback */ + void (* RepCounterWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Repetition counter register write complete Callback */ + void (* UpdateEventHalfCpltCallback)(struct __LPTIM_HandleTypeDef *hlptim);/*!< Update event half complete detection Callback */ + void (* ErrorCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Error Callback */ + void (* IC_CaptureCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Input capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __LPTIM_HandleTypeDef *htim); /*!< Input Capture half complete Callback */ + void (* IC_OverCaptureCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Over capture Callback */ +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +} LPTIM_HandleTypeDef; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL LPTIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_LPTIM_MSPINIT_CB_ID = 0x00U, /*!< LPTIM Base Msp Init Callback ID */ + HAL_LPTIM_MSPDEINIT_CB_ID = 0x01U, /*!< LPTIM Base Msp DeInit Callback ID */ + HAL_LPTIM_COMPARE_MATCH_CB_ID = 0x02U, /*!< Compare match Callback ID */ + HAL_LPTIM_AUTORELOAD_MATCH_CB_ID = 0x03U, /*!< Auto-reload match Callback ID */ + HAL_LPTIM_TRIGGER_CB_ID = 0x04U, /*!< External trigger event detection Callback ID */ + HAL_LPTIM_COMPARE_WRITE_CB_ID = 0x05U, /*!< Compare register write complete Callback ID */ + HAL_LPTIM_AUTORELOAD_WRITE_CB_ID = 0x06U, /*!< Auto-reload register write complete Callback ID */ + HAL_LPTIM_DIRECTION_UP_CB_ID = 0x07U, /*!< Up-counting direction change Callback ID */ + HAL_LPTIM_DIRECTION_DOWN_CB_ID = 0x08U, /*!< Down-counting direction change Callback ID */ + HAL_LPTIM_UPDATE_EVENT_CB_ID = 0x09U, /*!< Update event detection Callback ID */ + HAL_LPTIM_REP_COUNTER_WRITE_CB_ID = 0x0AU, /*!< Repetition counter register write complete Callback ID */ + HAL_LPTIM_UPDATE_EVENT_HALF_CB_ID = 0x0BU, /*!< Update event half complete detection Callback ID */ + HAL_LPTIM_ERROR_CB_ID = 0x0CU, /*!< LPTIM Error Callback ID */ + HAL_LPTIM_IC_CAPTURE_CB_ID = 0x0DU, /*!< Input capture Callback ID */ + HAL_LPTIM_IC_CAPTURE_HALF_CB_ID = 0x0EU, /*!< Input capture half complete Callback ID */ + HAL_LPTIM_OVER_CAPTURE_CB_ID = 0x0FU, /*!< Over capture Callback ID */ +} HAL_LPTIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< pointer to the LPTIM callback function */ + +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants + * @{ + */ + +/** @defgroup LPTIM_Clock_Source LPTIM Clock Source + * @{ + */ +#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC 0x00000000U +#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler + * @{ + */ +#define LPTIM_PRESCALER_DIV1 0x00000000U +#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0 +#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1 +#define LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1) +#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2 +#define LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2) +#define LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2) +#define LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time + * @{ + */ +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION 0x00000000U +#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0 +#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1 +#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT +/** + * @} + */ + +/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity + * @{ + */ +#define LPTIM_CLOCKPOLARITY_RISING 0x00000000U +#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0 +#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1 +/** + * @} + */ + +/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source + * @{ + */ +#define LPTIM_TRIGSOURCE_SOFTWARE 0x0000FFFFU +#define LPTIM_TRIGSOURCE_0 0x00000000U +#define LPTIM_TRIGSOURCE_1 LPTIM_CFGR_TRIGSEL_0 +#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1 +#define LPTIM_TRIGSOURCE_3 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1) +#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2 +#define LPTIM_TRIGSOURCE_5 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2) +#define LPTIM_TRIGSOURCE_6 (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_2) +#define LPTIM_TRIGSOURCE_7 LPTIM_CFGR_TRIGSEL +/** + * @} + */ + +/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity + * @{ + */ +#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0 +#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1 +#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN +/** + * @} + */ + +/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time + * @{ + */ +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION 0x00000000U +#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0 +#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1 +#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT +/** + * @} + */ + +/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode + * @{ + */ + +#define LPTIM_UPDATE_IMMEDIATE 0x00000000U +#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD +/** + * @} + */ + +/** @defgroup LPTIM_Counter_Source LPTIM Counter Source + * @{ + */ + +#define LPTIM_COUNTERSOURCE_INTERNAL 0x00000000U +#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE +/** + * @} + */ + +/** @defgroup LPTIM_Input1_Source LPTIM Input1 Source + * @{ + */ + +#define LPTIM_INPUT1SOURCE_GPIO 0x00000000UL /*!< For LPTIM1 and LPTIM2 */ +/** + * @} + */ + +/** @defgroup LPTIM_Input2_Source LPTIM Input2 Source + * @{ + */ + +#define LPTIM_INPUT2SOURCE_GPIO 0x00000000UL /*!< For LPTIM1 and LPTIM2 */ +/** + * @} + */ + +/** @defgroup LPTIM_Flag_Definition LPTIM Flags Definition + * @{ + */ + +#define LPTIM_FLAG_CC1O LPTIM_ISR_CC1OF +#define LPTIM_FLAG_CC2O LPTIM_ISR_CC2OF +#define LPTIM_FLAG_CC1 LPTIM_ISR_CC1IF +#define LPTIM_FLAG_CC2 LPTIM_ISR_CC2IF +#define LPTIM_FLAG_CMP1OK LPTIM_ISR_CMP1OK +#define LPTIM_FLAG_CMP2OK LPTIM_ISR_CMP2OK +#define LPTIM_FLAG_DIEROK LPTIM_ISR_DIEROK +#define LPTIM_FLAG_REPOK LPTIM_ISR_REPOK +#define LPTIM_FLAG_UPDATE LPTIM_ISR_UE +#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN +#define LPTIM_FLAG_UP LPTIM_ISR_UP +#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK +#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG +#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM +/** + * @} + */ + +/** @defgroup LPTIM_DMA_sources LPTIM DMA Sources + * @{ + */ +#define LPTIM_DMA_UPDATE LPTIM_DIER_UEDE /*!< DMA request is triggered by the update event */ +#define LPTIM_DMA_CC1 LPTIM_DIER_CC1DE /*!< DMA request is triggered by the capture 1 event */ +#define LPTIM_DMA_CC2 LPTIM_DIER_CC2DE /*!< DMA request is triggered by the capture 2 event */ + +/** + * @} + */ + +/** @defgroup LPTIM_DMA_Handle_index LPTIM DMA Handle Index + * @{ + */ +#define LPTIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define LPTIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Update event 1 DMA request */ +#define LPTIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Update event 2 DMA request */ +/** + * @} + */ + +/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition + * @{ + */ +#define LPTIM_IT_CC1O LPTIM_DIER_CC1OIE +#define LPTIM_IT_CC2O LPTIM_DIER_CC2OIE +#define LPTIM_IT_CC1 LPTIM_DIER_CC1IE +#define LPTIM_IT_CC2 LPTIM_DIER_CC2IE +#define LPTIM_IT_CMP1OK LPTIM_DIER_CMP1OKIE +#define LPTIM_IT_CMP2OK LPTIM_DIER_CMP2OKIE +#define LPTIM_IT_REPOK LPTIM_DIER_REPOKIE +#define LPTIM_IT_UPDATE LPTIM_DIER_UEIE +#define LPTIM_IT_DOWN LPTIM_DIER_DOWNIE +#define LPTIM_IT_UP LPTIM_DIER_UPIE +#define LPTIM_IT_ARROK LPTIM_DIER_ARROKIE +#define LPTIM_IT_EXTTRIG LPTIM_DIER_EXTTRIGIE +#define LPTIM_IT_ARRM LPTIM_DIER_ARRMIE +/** + * @} + */ + +/** @defgroup LPTIM_Channel LPTIM Channel + * @{ + */ +#define LPTIM_CHANNEL_1 LL_LPTIM_CHANNEL_CH1 /*!< Capture/compare channel 1 identifier */ +#define LPTIM_CHANNEL_2 LL_LPTIM_CHANNEL_CH2 /*!< Capture/compare channel 2 identifier */ +/** + * @} + */ + +/** @defgroup LPTIM_Output_Compare_Polarity LPTIM Output Compare Polarity + * @{ + */ +#define LPTIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define LPTIM_OCPOLARITY_LOW 0x00000001U /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup LPTIM_Input_Capture_Prescaler LPTIM Input Capture Prescaler + * @{ + */ +#define LPTIM_ICPSC_DIV1 0x00000000UL /*!< Capture performed each time an edge is detected on the capture input */ +#define LPTIM_ICPSC_DIV2 LPTIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define LPTIM_ICPSC_DIV4 LPTIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define LPTIM_ICPSC_DIV8 (LPTIM_CCMR1_IC1PSC_0|LPTIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup LPTIM_Input_Capture_Polarity LPTIM Input Capture Polarity + * @{ + */ +#define LPTIM_ICPOLARITY_RISING 0x00000000UL /*!< Capture/Compare input rising polarity */ +#define LPTIM_ICPOLARITY_FALLING LPTIM_CCMR1_CC1P_0 /*!< Capture/Compare input falling polarity */ +#define LPTIM_ICPOLARITY_RISING_FALLING (LPTIM_CCMR1_CC1P_0|LPTIM_CCMR1_CC1P_1) /*!< Capture/Compare input rising and falling polarities */ +/** + * @} + */ + +/** @defgroup LPTIM_Input_Capture_Filter LPTIM Input Capture Filter + * @{ + */ +#define LPTIM_ICFLT_CLOCK_DIV1 0x00000000UL /*!< any external input capture signal level change is considered as a valid transition */ +#define LPTIM_ICFLT_CLOCK_DIV2 LPTIM_CCMR1_IC1F_0 /*!< external input capture signal level change must be stable for at least 2 clock periods before it is considered as valid transition */ +#define LPTIM_ICFLT_CLOCK_DIV4 LPTIM_CCMR1_IC1F_1 /*!< external input capture signal level change must be stable for at least 4 clock periods before it is considered as valid transition */ +#define LPTIM_ICFLT_CLOCK_DIV8 (LPTIM_CCMR1_IC1F_0|LPTIM_CCMR1_IC1F_1) /*!< external input capture signal level change must be stable for at least 8 clock periods before it is considered as valid transition */ +/** + * @} + */ + +/** @defgroup LPTIM_Input_Capture_Source LPTIM Input Capture Source + * @{ + */ +#define LPTIM_IC1SOURCE_GPIO 0x00000000UL /*!< For LPTIM1, LPTIM2 and LPTIM3 */ +#define LPTIM_IC2SOURCE_GPIO 0x00000000UL /*!< For LPTIM1, LPTIM2 and LPTIM3 */ +#define LPTIM_IC2SOURCE_LSI LPTIM_CFGR2_IC2SEL_0 /*!< For LPTIM1 */ +#define LPTIM_IC2SOURCE_LSE LPTIM_CFGR2_IC2SEL_1 /*!< For LPTIM1 */ +#define LPTIM_IC2SOURCE_HSI_1024 LPTIM_CFGR2_IC2SEL_0 /*!< For LPTIM2 */ +#define LPTIM_IC2SOURCE_CSI_128 LPTIM_CFGR2_IC2SEL_1 /*!< For LPTIM2 */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros + * @{ + */ + +/** @brief Reset LPTIM handle state. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_LPTIM_CHANNEL_STATE_RESET;\ + (__HANDLE__)->ChannelState[1] = HAL_LPTIM_CHANNEL_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_LPTIM_CHANNEL_STATE_RESET;\ + (__HANDLE__)->ChannelState[1] = HAL_LPTIM_CHANNEL_STATE_RESET;\ + } while(0) +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the LPTIM peripheral. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE)) + +/** + * @brief Disable the LPTIM peripheral. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCMR1 & LPTIM_CCMR1_CC1E) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCMR1 & LPTIM_CCMR1_CC2E) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE); \ + } \ + } \ + } while(0) + +/** + * @brief Start the LPTIM peripheral in Continuous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT) +/** + * @brief Start the LPTIM peripheral in single mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT) + +/** + * @brief Reset the LPTIM Counter register in synchronous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_RESET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_COUNTRST) + +/** + * @brief Reset after read of the LPTIM Counter register in asynchronous mode. + * @param __HANDLE__ LPTIM handle + * @retval None + */ +#define __HAL_LPTIM_RESET_COUNTER_AFTERREAD(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_RSTARE) + +/** + * @brief Write the passed parameter in the Autoreload register. + * @param __HANDLE__ LPTIM handle + * @param __VALUE__ Autoreload value + * @retval None + * @note The ARR register can only be modified when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__)) + +/** + * @brief Write the passed parameter in the Compare register. + * @param __HANDLE__ LPTIM handle + * @param __VALUE__ Compare value + * @param __CHANNEL__ TIM Channel to be configured + * @retval None + * @note The CCRx registers can only be modified when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __CHANNEL__, __VALUE__) \ + (((__CHANNEL__) == LPTIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__VALUE__)) :\ + ((__CHANNEL__) == LPTIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__VALUE__)) : 0U) + +/** + * @brief Write the passed parameter in the Repetition register. + * @param __HANDLE__ LPTIM handle + * @param __VALUE__ Repetition value + * @retval None + */ +#define __HAL_LPTIM_REPETITIONCOUNTER_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->RCR = (__VALUE__)) + +/** + * @brief Return the current Repetition value. + * @param __HANDLE__ LPTIM handle + * @retval Repetition register value + * @note The RCR register can only be modified when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_REPETITIONCOUNTER_GET(__HANDLE__) ((__HANDLE__)->Instance->RCR) + +/** + * @brief Enable the LPTIM signal input/output on the corresponding pin. + * @param __HANDLE__ LPTIM handle + * @param __CHANNEL__ LPTIM Channels to be enabled. + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval None + */ +#define __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(__HANDLE__, __CHANNEL__) \ + do { \ + switch (__CHANNEL__) \ + { \ + case LPTIM_CHANNEL_1: \ + ((__HANDLE__)->Instance->CCMR1 |= LPTIM_CCMR1_CC1E); \ + break; \ + case LPTIM_CHANNEL_2: \ + ((__HANDLE__)->Instance->CCMR1 |= LPTIM_CCMR1_CC2E); \ + break; \ + default: \ + break; \ + } \ + } \ + while(0) + +/** + * @brief Disable the LPTIM signal input/output on the corresponding pin. + * @param __HANDLE__ LPTIM handle + * @param __CHANNEL__ LPTIM Channels to be disabled. + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval None + */ +#define __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(__HANDLE__, __CHANNEL__) \ + do { \ + switch (__CHANNEL__) \ + { \ + case LPTIM_CHANNEL_1: \ + ((__HANDLE__)->Instance->CCMR1 &= ~LPTIM_CCMR1_CC1E); \ + break; \ + case LPTIM_CHANNEL_2: \ + ((__HANDLE__)->Instance->CCMR1 &= ~LPTIM_CCMR1_CC2E); \ + break; \ + default: \ + break; \ + } \ + } \ + while(0) + +/** + * @brief Check whether the specified LPTIM flag is set or not. + * @param __HANDLE__ LPTIM handle + * @param __FLAG__ LPTIM flag to check + * This parameter can be a value of: + * @arg LPTIM_FLAG_REPOK : Repetition register update OK Flag. + * @arg LPTIM_FLAG_UPDATE : Update event Flag. + * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. + * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. + * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. + * @arg LPTIM_FLAG_CMP1OK : Compare register 1 update OK Flag. + * @arg LPTIM_FLAG_CMP2OK : Compare register 2 update OK Flag. + * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. + * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. + * @arg LPTIM_FLAG_CC1 : Capture/Compare 1 interrupt flag. + * @arg LPTIM_FLAG_CC2 : Capture/Compare 2 interrupt flag. + * @arg LPTIM_FLAG_CC1O : Capture/Compare 1 over-capture flag. + * @arg LPTIM_FLAG_CC2O : Capture/Compare 2 over-capture flag. + * @arg LPTIM_FLAG_DIEROK : DMA & interrupt enable update OK flag. + * @retval The state of the specified flag (SET or RESET). + */ +#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified LPTIM flag. + * @param __HANDLE__ LPTIM handle. + * @param __FLAG__ LPTIM flag to clear. + * This parameter can be a value of: + * @arg LPTIM_FLAG_REPOK : Repetition register update OK Flag. + * @arg LPTIM_FLAG_UPDATE : Update event Flag. + * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag. + * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag. + * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag. + * @arg LPTIM_FLAG_CMP1OK : Compare register 1 update OK Flag. + * @arg LPTIM_FLAG_CMP2OK : Compare register 2 update OK Flag. + * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag. + * @arg LPTIM_FLAG_ARRM : Autoreload match Flag. + * @arg LPTIM_FLAG_CC1 : Capture/Compare 1 interrupt flag. + * @arg LPTIM_FLAG_CC2 : Capture/Compare 2 interrupt flag. + * @arg LPTIM_FLAG_CC1O : Capture/Compare 1 over-capture flag. + * @arg LPTIM_FLAG_CC2O : Capture/Compare 2 over-capture flag. + * @arg LPTIM_FLAG_DIEROK : DMA & interrupt enable update OK flag. + * @retval None. + */ +#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enable the specified LPTIM interrupt. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to set. + * This parameter can be a value of: + * @arg LPTIM_IT_REPOK : Repetition register update OK Interrupt. + * @arg LPTIM_IT_UPDATE : Update event register Interrupt. + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMP1OK : Compare register 1 update OK Interrupt. + * @arg LPTIM_IT_CMP2OK : Compare register 2 update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CC1 : Capture/Compare 1 interrupt Interrupt. + * @arg LPTIM_IT_CC2 : Capture/Compare 2 interrupt Interrupt. + * @arg LPTIM_IT_CC1O : Capture/Compare 1 over-capture Interrupt. + * @arg LPTIM_IT_CC2O : Capture/Compare 2 over-capture Interrupt. + * @retval None. + * @note The LPTIM interrupts can only be enabled when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** + * @brief Disable the specified LPTIM interrupt. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to set. + * This parameter can be a value of: + * @arg LPTIM_IT_REPOK : Repetition register update OK Interrupt. + * @arg LPTIM_IT_UPDATE : Update event register Interrupt. + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMP1OK : Compare register 1 update OK Interrupt. + * @arg LPTIM_IT_CMP2OK : Compare register 2 update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CC1 : Capture/Compare 1 interrupt Interrupt. + * @arg LPTIM_IT_CC2 : Capture/Compare 2 interrupt Interrupt. + * @arg LPTIM_IT_CC1O : Capture/Compare 1 over-capture Interrupt. + * @arg LPTIM_IT_CC2O : Capture/Compare 2 over-capture Interrupt. + * @retval None. + * @note The LPTIM interrupts can only be disabled when the LPTIM instance is enabled. + */ +#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= (~(__INTERRUPT__))) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the LPTIM DMA request to enable. + * This parameter can be one of the following values: + * @arg LPTIM_DMA_UPDATE: Update DMA request + * @arg LPTIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg LPTIM_DMA_CC2: Capture/Compare 2 DMA request + * @retval None + */ +#define __HAL_LPTIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the LPTIM Handle. + * @param __DMA__ specifies the LPTIM DMA request to disable. + * This parameter can be one of the following values: + * @arg LPTIM_DMA_UPDATE: Update DMA request + * @arg LPTIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg LPTIM_DMA_CC2: Capture/Compare 2 DMA request + * @retval None + */ +#define __HAL_LPTIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** + * @brief Check whether the specified LPTIM interrupt source is enabled or not. + * @param __HANDLE__ LPTIM handle. + * @param __INTERRUPT__ LPTIM interrupt to check. + * This parameter can be a value of: + * @arg LPTIM_IT_REPOK : Repetition register update OK Interrupt. + * @arg LPTIM_IT_UPDATE : Update event register Interrupt. + * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt. + * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt. + * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt. + * @arg LPTIM_IT_CMP1OK : Compare register 1 update OK Interrupt. + * @arg LPTIM_IT_CMP2OK : Compare register 2 update OK Interrupt. + * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt. + * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. + * @arg LPTIM_IT_CC1 : Capture/Compare 1 interrupt Interrupt. + * @arg LPTIM_IT_CC2 : Capture/Compare 2 interrupt Interrupt. + * @arg LPTIM_IT_CC1O : Capture/Compare 1 over-capture Interrupt. + * @arg LPTIM_IT_CC2O : Capture/Compare 2 over-capture Interrupt. + * @retval Interrupt status. + */ + +#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Enable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() (EXTI->IMR2 |= LPTIM_EXTI_LINE_LPTIM1) + +/** + * @brief Disable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR2\ + &= ~(LPTIM_EXTI_LINE_LPTIM1)) + +/** + * @brief Enable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT() (EXTI->IMR2 |= LPTIM_EXTI_LINE_LPTIM2) + +/** + * @brief Disable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR2\ + &= ~(LPTIM_EXTI_LINE_LPTIM2)) + +/** + * @brief Enable the LPTIM3 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM3_EXTI_ENABLE_IT() (EXTI->IMR2 |= LPTIM_EXTI_LINE_LPTIM3) + +/** + * @brief Disable the LPTIM3 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM3_EXTI_DISABLE_IT() (EXTI->IMR2\ + &= ~(LPTIM_EXTI_LINE_LPTIM3)) + +/** + * @brief Enable the LPTIM4 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM4_EXTI_ENABLE_IT() (EXTI->IMR2 |= LPTIM_EXTI_LINE_LPTIM4) + +/** + * @brief Disable the LPTIM4 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM4_EXTI_DISABLE_IT() (EXTI->IMR2\ + &= ~(LPTIM_EXTI_LINE_LPTIM4)) + +/** + * @brief Enable the LPTIM5 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM5_EXTI_ENABLE_IT() (EXTI->IMR2 |= LPTIM_EXTI_LINE_LPTIM5) + +/** + * @brief Disable the LPTIM5 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM5_EXTI_DISABLE_IT() (EXTI->IMR2\ + &= ~(LPTIM_EXTI_LINE_LPTIM5)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions + * @{ + */ + +/** @addtogroup LPTIM_Exported_Functions_Group1 + * @brief Initialization and Configuration functions. + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); + +/* MSP functions *************************************************************/ +void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group2 + * @brief Start-Stop operation functions. + * @{ + */ +/* Config functions **********************************************************/ +HAL_StatusTypeDef HAL_LPTIM_OC_ConfigChannel(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig, + uint32_t Channel); + +/* Start/Stop operation functions *********************************************/ +/* ################################# PWM Mode ################################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel, const uint32_t *pData, + uint32_t Length); +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); + +/* ############################# One Pulse Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); + +/* ############################## Set once Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); + +/* ############################### Encoder Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################# Time out Mode ##############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Timeout); +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Timeout); +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################## Counter Mode ###############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim); +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim); + +/* ############################## Input Capture Mode ###############################*/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_LPTIM_IC_ConfigChannel(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_IC_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_IC_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_LPTIM_IC_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_IC_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +HAL_StatusTypeDef HAL_LPTIM_IC_Start_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel, uint32_t *pData, + uint32_t Length); +HAL_StatusTypeDef HAL_LPTIM_IC_Stop_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group3 + * @brief Read operation functions. + * @{ + */ +/* Reading operation functions ************************************************/ +uint32_t HAL_LPTIM_ReadCounter(const LPTIM_HandleTypeDef *hlptim); +uint32_t HAL_LPTIM_ReadAutoReload(const LPTIM_HandleTypeDef *hlptim); +uint32_t HAL_LPTIM_ReadCapturedValue(const LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +uint8_t HAL_LPTIM_IC_GetOffset(const LPTIM_HandleTypeDef *hlptim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup LPTIM_Exported_Functions_Group4 + * @brief LPTIM IRQ handler and callback functions. + * @{ + */ +/* LPTIM IRQ functions *******************************************************/ +void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim); + +/* CallBack functions ********************************************************/ +void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_ErrorCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_UpdateEventCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_UpdateEventHalfCpltCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_RepCounterWriteCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_IC_CaptureCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_IC_CaptureHalfCpltCallback(LPTIM_HandleTypeDef *hlptim); +void HAL_LPTIM_IC_OverCaptureCallback(LPTIM_HandleTypeDef *hlptim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, + pLPTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup LPTIM_Group5 + * @brief Peripheral State functions. + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(const LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Types LPTIM Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Variables LPTIM Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Constants LPTIM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Macros LPTIM Private Macros + * @{ + */ + +#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \ + ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)) + + +#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \ + ((__PRESCALER__) == LPTIM_PRESCALER_DIV128)) + +#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1) +#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \ + ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS)) + +#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING)) + +#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_5) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_6) || \ + ((__TRIG__) == LPTIM_TRIGSOURCE_7)) + +#define IS_LPTIM_EXT_TRG_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING ) || \ + ((__POLARITY__) == LPTIM_ACTIVEEDGE_FALLING ) || \ + ((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING_FALLING )) + +#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \ + ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS )) + +#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \ + ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD)) + +#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \ + ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL)) + +#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((0x00000001UL <= (__AUTORELOAD__)) &&\ + ((__AUTORELOAD__) <= 0x0000FFFFUL)) + +#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFUL) + +#define IS_LPTIM_PERIOD(__PERIOD__) ((0x00000001UL <= (__PERIOD__)) &&\ + ((__PERIOD__) <= 0x0000FFFFUL)) + +#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFFUL) + +#define IS_LPTIM_OC_POLARITY(__OCPOLARITY__) (((__OCPOLARITY__) == LPTIM_OCPOLARITY_LOW) || \ + ((__OCPOLARITY__) == LPTIM_OCPOLARITY_HIGH)) +#define IS_LPTIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_ICPSC_DIV1) ||\ + ((__PRESCALER__) == LPTIM_ICPSC_DIV2) ||\ + ((__PRESCALER__) == LPTIM_ICPSC_DIV4) ||\ + ((__PRESCALER__) == LPTIM_ICPSC_DIV8)) + +#define IS_LPTIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == LPTIM_ICPOLARITY_FALLING) ||\ + ((__POLARITY__) == LPTIM_ICPOLARITY_RISING_FALLING)) + +#define IS_LPTIM_IC_FILTER(__FILTER__) (((__FILTER__) == LPTIM_ICFLT_CLOCK_DIV1) ||\ + ((__FILTER__) == LPTIM_ICFLT_CLOCK_DIV2) ||\ + ((__FILTER__) == LPTIM_ICFLT_CLOCK_DIV4) ||\ + ((__FILTER__) == LPTIM_ICFLT_CLOCK_DIV8)) + +#define IS_LPTIM_REPETITION(__REPETITION__) ((__REPETITION__) <= 0x000000FFUL) + +#define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \ + ((((__INSTANCE__) == LPTIM1) || \ + ((__INSTANCE__) == LPTIM2) || \ + ((__INSTANCE__) == LPTIM3)) && \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO)) + +#define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \ + ((((__INSTANCE__) == LPTIM1) || \ + ((__INSTANCE__) == LPTIM2) || \ + ((__INSTANCE__) == LPTIM3)) && \ + ((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO)) + +#define IS_LPTIM_IC1_SOURCE(__INSTANCE__, __SOURCE__) \ + ((((__INSTANCE__) == LPTIM1) || \ + ((__INSTANCE__) == LPTIM2)|| \ + ((__INSTANCE__) == LPTIM3)) && \ + ((__SOURCE__) == LPTIM_IC1SOURCE_GPIO)) + +#define IS_LPTIM_IC2_SOURCE(__INSTANCE__, __SOURCE__) \ + ((((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_IC2SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_IC2SOURCE_LSI) || \ + ((__SOURCE__) == LPTIM_IC2SOURCE_LSE))) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + (((__SOURCE__) == LPTIM_IC2SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_IC2SOURCE_HSI_1024) || \ + ((__SOURCE__) == LPTIM_IC2SOURCE_CSI_128))) \ + || \ + (((__INSTANCE__) == LPTIM3) && \ + ((__SOURCE__) == LPTIM_IC2SOURCE_GPIO))) + +#define LPTIM_CHANNEL_STATE_GET(__INSTANCE__, __CHANNEL__)\ + (((__CHANNEL__) == LPTIM_CHANNEL_1) ? (__INSTANCE__)->ChannelState[0] :\ + (__INSTANCE__)->ChannelState[1]) + +#define LPTIM_CHANNEL_STATE_SET(__INSTANCE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == LPTIM_CHANNEL_1) ? ((__INSTANCE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__INSTANCE__)->ChannelState[1] = (__CHANNEL_STATE__))) + +#define LPTIM_CHANNEL_STATE_SET_ALL(__INSTANCE__, __CHANNEL_STATE__) do { \ + (__INSTANCE__)->ChannelState[0] =\ + (__CHANNEL_STATE__); \ + (__INSTANCE__)->ChannelState[1] =\ + (__CHANNEL_STATE__); \ + } while(0) + +#define IS_LPTIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) \ + ((((__INSTANCE__) == LPTIM1) && \ + (((__CHANNEL__) == LPTIM_CHANNEL_1) || \ + ((__CHANNEL__) == LPTIM_CHANNEL_2))) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + (((__CHANNEL__) == LPTIM_CHANNEL_1) || \ + ((__CHANNEL__) == LPTIM_CHANNEL_2))) \ + || \ + (((__INSTANCE__) == LPTIM3) && \ + (((__CHANNEL__) == LPTIM_CHANNEL_1) || \ + ((__CHANNEL__) == LPTIM_CHANNEL_2))) \ + || \ + (((__INSTANCE__) == LPTIM4) && \ + ((__CHANNEL__) == LPTIM_CHANNEL_1)) \ + || \ + (((__INSTANCE__) == LPTIM5) && \ + ((__CHANNEL__) == LPTIM_CHANNEL_1))) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Functions LPTIM Private Functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPTIM1 || LPTIM2 || LPTIM3 || LPTIM4 || LPTIM5 */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_LPTIM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc.h new file mode 100644 index 000000000..8f8d6a3f8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc.h @@ -0,0 +1,720 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ltdc.h + * @author MCD Application Team + * @brief Header file of LTDC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_LTDC_H +#define STM32H7RSxx_HAL_LTDC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (LTDC) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup LTDC LTDC + * @brief LTDC HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Types LTDC Exported Types + * @{ + */ +#define MAX_LAYER 2U + +/** + * @brief LTDC color structure definition + */ +typedef struct +{ + uint8_t Blue; /*!< Configures the blue value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Green; /*!< Configures the green value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Red; /*!< Configures the red value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Reserved; /*!< Reserved 0xFF */ +} LTDC_ColorTypeDef; + +/** + * @brief LTDC Init structure definition + */ +typedef struct +{ + uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity. + This parameter can be one value of @ref LTDC_HS_POLARITY */ + + uint32_t VSPolarity; /*!< configures the vertical synchronization polarity. + This parameter can be one value of @ref LTDC_VS_POLARITY */ + + uint32_t DEPolarity; /*!< configures the data enable polarity. + This parameter can be one of value of @ref LTDC_DE_POLARITY */ + + uint32_t PCPolarity; /*!< configures the pixel clock polarity. + This parameter can be one of value of @ref LTDC_PC_POLARITY */ + + uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width. + This parameter must be a number between + Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */ + + uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height. + This parameter must be a number between + Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */ + + uint32_t AccumulatedActiveW; /*!< configures the accumulated active width. + This parameter must be a number between + Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */ + + uint32_t AccumulatedActiveH; /*!< configures the accumulated active height. + This parameter must be a number between + Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */ + + uint32_t TotalWidth; /*!< configures the total width. + This parameter must be a number between + Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */ + + uint32_t TotalHeigh; /*!< configures the total height. + This parameter must be a number between + Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */ + + LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */ +} LTDC_InitTypeDef; + +/** + * @brief LTDC Layer structure definition + */ +typedef struct +{ + uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t WindowY0; /*!< Configures the Window vertical Start Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + uint32_t WindowY1; /*!< Configures the Window vertical Stop Position. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x7FF. */ + + uint32_t PixelFormat; /*!< Specifies the pixel format. + This parameter can be one of value of @ref LTDC_Pixelformat */ + + uint32_t Alpha; /*!< Specifies the constant alpha used for blending. + This parameter must be a number between + Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint32_t Alpha0; /*!< Configures the default alpha value. + This parameter must be a number between + Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint32_t BlendingFactor1; /*!< Select the blending factor 1. + This parameter can be one of value of @ref LTDC_BlendingFactor1 */ + + uint32_t BlendingFactor2; /*!< Select the blending factor 2. + This parameter can be one of value of @ref LTDC_BlendingFactor2 */ + + uint32_t FBStartAdress; /*!< Configures the color frame buffer address */ + + uint32_t ImageWidth; /*!< Configures the color frame buffer line length. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x1FFF. */ + + uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */ +} LTDC_LayerCfgTypeDef; + +/** + * @brief HAL LTDC State structures definition + */ +typedef enum +{ + HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */ + HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */ + HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */ + HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */ + HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */ +} HAL_LTDC_StateTypeDef; + +/** + * @brief LTDC handle Structure definition + */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +typedef struct __LTDC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ +{ + LTDC_TypeDef *Instance; /*!< LTDC Register base address */ + + LTDC_InitTypeDef Init; /*!< LTDC parameters */ + + LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */ + + HAL_LockTypeDef Lock; /*!< LTDC Lock */ + + __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */ + + __IO uint32_t ErrorCode; /*!< LTDC Error code */ + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Line Event Callback */ + void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Reload Event Callback */ + void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Error Callback */ + + void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp Init callback */ + void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp DeInit callback */ + +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + +} LTDC_HandleTypeDef; + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL LTDC Callback ID enumeration definition + */ +typedef enum +{ + HAL_LTDC_MSPINIT_CB_ID = 0x00U, /*!< LTDC MspInit callback ID */ + HAL_LTDC_MSPDEINIT_CB_ID = 0x01U, /*!< LTDC MspDeInit callback ID */ + + HAL_LTDC_LINE_EVENT_CB_ID = 0x02U, /*!< LTDC Line Event Callback ID */ + HAL_LTDC_RELOAD_EVENT_CB_ID = 0x03U, /*!< LTDC Reload Callback ID */ + HAL_LTDC_ERROR_CB_ID = 0x04U /*!< LTDC Error Callback ID */ + +} HAL_LTDC_CallbackIDTypeDef; + +/** + * @brief HAL LTDC Callback pointer definition + */ +typedef void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc); /*!< pointer to an LTDC callback function */ + +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Constants LTDC Exported Constants + * @{ + */ + +/** @defgroup LTDC_Error_Code LTDC Error Code + * @{ + */ +#define HAL_LTDC_ERROR_NONE 0x00000000U /*!< LTDC No error */ +#define HAL_LTDC_ERROR_TE 0x00000001U /*!< LTDC Transfer error */ +#define HAL_LTDC_ERROR_FU 0x00000002U /*!< LTDC FIFO Underrun */ +#define HAL_LTDC_ERROR_TIMEOUT 0x00000020U /*!< LTDC Timeout error */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +#define HAL_LTDC_ERROR_INVALID_CALLBACK 0x00000040U /*!< LTDC Invalid Callback error */ +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup LTDC_Layer LTDC Layer + * @{ + */ +#define LTDC_LAYER_1 0x00000000U /*!< LTDC Layer 1 */ +#define LTDC_LAYER_2 0x00000001U /*!< LTDC Layer 2 */ +/** + * @} + */ + +/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY + * @{ + */ +#define LTDC_HSPOLARITY_AL 0x00000000U /*!< Horizontal Synchronization is active low. */ +#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY + * @{ + */ +#define LTDC_VSPOLARITY_AL 0x00000000U /*!< Vertical Synchronization is active low. */ +#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY + * @{ + */ +#define LTDC_DEPOLARITY_AL 0x00000000U /*!< Data Enable, is active low. */ +#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY + * @{ + */ +#define LTDC_PCPOLARITY_IPC 0x00000000U /*!< input pixel clock. */ +#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */ +/** + * @} + */ + +/** @defgroup LTDC_SYNC LTDC SYNC + * @{ + */ +#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */ +#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */ +/** + * @} + */ + +/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR + * @{ + */ +#define LTDC_COLOR 0x000000FFU /*!< Color mask */ +/** + * @} + */ + +/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1 + * @{ + */ +#define LTDC_BLENDING_FACTOR1_CA 0x00000400U /*!< Blending factor : Cte Alpha */ +#define LTDC_BLENDING_FACTOR1_PAxCA 0x00000600U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ +/** + * @} + */ + +/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2 + * @{ + */ +#define LTDC_BLENDING_FACTOR2_CA 0x00000005U /*!< Blending factor : Cte Alpha */ +#define LTDC_BLENDING_FACTOR2_PAxCA 0x00000007U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ +/** + * @} + */ + +/** @defgroup LTDC_Pixelformat LTDC Pixel format + * @{ + */ +#define LTDC_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */ +/** + * @} + */ + +/** @defgroup LTDC_Alpha LTDC Alpha + * @{ + */ +#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Constant Alpha mask */ +/** + * @} + */ + +/** @defgroup LTDC_LAYER_Config LTDC LAYER Config + * @{ + */ +#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */ +#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */ + +#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */ +#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */ +/** + * @} + */ + +/** @defgroup LTDC_Interrupts LTDC Interrupts + * @{ + */ +#define LTDC_IT_LI LTDC_IER_LIE /*!< LTDC Line Interrupt */ +#define LTDC_IT_FU LTDC_IER_FUIE /*!< LTDC FIFO Underrun Interrupt */ +#define LTDC_IT_TE LTDC_IER_TERRIE /*!< LTDC Transfer Error Interrupt */ +#define LTDC_IT_RR LTDC_IER_RRIE /*!< LTDC Register Reload Interrupt */ +/** + * @} + */ + +/** @defgroup LTDC_Flags LTDC Flags + * @{ + */ +#define LTDC_FLAG_LI LTDC_ISR_LIF /*!< LTDC Line Interrupt Flag */ +#define LTDC_FLAG_FU LTDC_ISR_FUIF /*!< LTDC FIFO Underrun interrupt Flag */ +#define LTDC_FLAG_TE LTDC_ISR_TERRIF /*!< LTDC Transfer Error interrupt Flag */ +#define LTDC_FLAG_RR LTDC_ISR_RRIF /*!< LTDC Register Reload interrupt Flag */ +/** + * @} + */ + +/** @defgroup LTDC_Reload_Type LTDC Reload Type + * @{ + */ +#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */ +#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Macros LTDC Exported Macros + * @{ + */ + +/** @brief Reset LTDC handle state. + * @param __HANDLE__ LTDC handle + * @retval None + */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_LTDC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET) +#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @brief Enable the LTDC. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN) + +/** + * @brief Disable the LTDC. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN)) + +/** + * @brief Enable the LTDC Layer. + * @param __HANDLE__ LTDC handle + * @param __LAYER__ Specify the layer to be enabled. + * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval None. + */ +#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ + |= (uint32_t)LTDC_LxCR_LEN) + +/** + * @brief Disable the LTDC Layer. + * @param __HANDLE__ LTDC handle + * @param __LAYER__ Specify the layer to be disabled. + * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval None. + */ +#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ + &= ~(uint32_t)LTDC_LxCR_LEN) + +/** + * @brief Reload immediately all LTDC Layers. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR) + +/** + * @brief Reload during vertical blanking period all LTDC Layers. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR) + +/* Interrupt & Flag management */ +/** + * @brief Get the LTDC pending flags. + * @param __HANDLE__ LTDC handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg LTDC_FLAG_LI: Line Interrupt flag + * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag + * @arg LTDC_FLAG_TE: Transfer Error interrupt flag + * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** + * @brief Clears the LTDC pending flags. + * @param __HANDLE__ LTDC handle + * @param __FLAG__ Specify the flag to clear. + * This parameter can be any combination of the following values: + * @arg LTDC_FLAG_LI: Line Interrupt flag + * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag + * @arg LTDC_FLAG_TE: Transfer Error interrupt flag + * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enables the specified LTDC interrupts. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified LTDC interrupts. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified LTDC interrupt has occurred or not. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt source to check. + * This parameter can be one of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval The state of INTERRUPT (SET or RESET). + */ +#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) +/** + * @} + */ + +/* Include LTDC HAL Extension module */ +#include "stm32h7rsxx_hal_ltdc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LTDC_Exported_Functions + * @{ + */ +/** @addtogroup LTDC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, + pLTDC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc); +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, const uint32_t *pCLUT, uint32_t CLUTSize, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line); +HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType); +HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); + +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_LTDC_StateTypeDef HAL_LTDC_GetState(const LTDC_HandleTypeDef *hltdc); +uint32_t HAL_LTDC_GetError(const LTDC_HandleTypeDef *hltdc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup LTDC_Private_Macros LTDC Private Macros + * @{ + */ +#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(\ + ((uint32_t)((__HANDLE__)->Instance))\ + + 0x84U + (0x80U*(__LAYER__))))) +#define IS_LTDC_LAYER(__LAYER__) ((__LAYER__) < MAX_LAYER) +#define IS_LTDC_HSPOL(__HSPOL__) (((__HSPOL__) == LTDC_HSPOLARITY_AL)\ + || ((__HSPOL__) == LTDC_HSPOLARITY_AH)) +#define IS_LTDC_VSPOL(__VSPOL__) (((__VSPOL__) == LTDC_VSPOLARITY_AL)\ + || ((__VSPOL__) == LTDC_VSPOLARITY_AH)) +#define IS_LTDC_DEPOL(__DEPOL__) (((__DEPOL__) == LTDC_DEPOLARITY_AL)\ + || ((__DEPOL__) == LTDC_DEPOLARITY_AH)) +#define IS_LTDC_PCPOL(__PCPOL__) (((__PCPOL__) == LTDC_PCPOLARITY_IPC)\ + || ((__PCPOL__) == LTDC_PCPOLARITY_IIPC)) +#define IS_LTDC_HSYNC(__HSYNC__) ((__HSYNC__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_VSYNC(__VSYNC__) ((__VSYNC__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_AHBP(__AHBP__) ((__AHBP__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_AVBP(__AVBP__) ((__AVBP__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_AAW(__AAW__) ((__AAW__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_AAH(__AAH__) ((__AAH__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_TOTALW(__TOTALW__) ((__TOTALW__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_TOTALH(__TOTALH__) ((__TOTALH__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_BLUEVALUE(__BBLUE__) ((__BBLUE__) <= LTDC_COLOR) +#define IS_LTDC_GREENVALUE(__BGREEN__) ((__BGREEN__) <= LTDC_COLOR) +#define IS_LTDC_REDVALUE(__BRED__) ((__BRED__) <= LTDC_COLOR) +#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \ + ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA)) +#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \ + ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA)) +#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__) (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88)) +#define IS_LTDC_ALPHA(__ALPHA__) ((__ALPHA__) <= LTDC_ALPHA) +#define IS_LTDC_HCONFIGST(__HCONFIGST__) ((__HCONFIGST__) <= LTDC_STARTPOSITION) +#define IS_LTDC_HCONFIGSP(__HCONFIGSP__) ((__HCONFIGSP__) <= LTDC_STOPPOSITION) +#define IS_LTDC_VCONFIGST(__VCONFIGST__) ((__VCONFIGST__) <= LTDC_STARTPOSITION) +#define IS_LTDC_VCONFIGSP(__VCONFIGSP__) ((__VCONFIGSP__) <= LTDC_STOPPOSITION) +#define IS_LTDC_CFBP(__CFBP__) ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER) +#define IS_LTDC_CFBLL(__CFBLL__) ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER) +#define IS_LTDC_CFBLNBR(__CFBLNBR__) ((__CFBLNBR__) <= LTDC_LINE_NUMBER) +#define IS_LTDC_LIPOS(__LIPOS__) ((__LIPOS__) <= 0x7FFU) +#define IS_LTDC_RELOAD(__RELOADTYPE__) (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || \ + ((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup LTDC_Private_Functions LTDC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_LTDC_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc_ex.h new file mode 100644 index 000000000..4b9440da9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ltdc_ex.h @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ltdc_ex.h + * @author MCD Application Team + * @brief Header file of LTDC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_LTDC_EX_H +#define STM32H7RSxx_HAL_LTDC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (LTDC) && defined (DSI) + +#include "stm32h7rsxx_hal_dsi.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup LTDCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LTDCEx_Exported_Functions + * @{ + */ + +/** @addtogroup LTDCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg); +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC && DSI */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_LTDC_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mce.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mce.h new file mode 100644 index 000000000..12fb8767a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mce.h @@ -0,0 +1,479 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mce.h + * @author MCD Application Team + * @brief Header file of MCE HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_MCE_H +#define STM32H7RSxx_HAL_MCE_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(MCE1) +/** @addtogroup MCE + * @{ + */ +typedef struct +{ + uint32_t ContextID; /*!< MCE region context ID (can be null) */ + /*!< This parameter is a value of @ref MCE_Context_Index. */ + + uint32_t StartAddress; /*!< MCE region start address */ + + uint32_t EndAddress; /*!< MCE region end address */ + + uint32_t Mode; /*!< Indicates the chaining mode used for encryption. */ + /*!< This parameter is a value of @defgroup MCE_Ciphering_Algorithm */ + uint32_t AccessMode; /*!< MCE region writes enabled or not */ + /*!< This parameter is a value of @ref MCE_Region_Privilege. */ + + uint32_t PrivilegedAccess; /*!< MCE region privileged access or not */ + /*!< This parameter is a value of @ref MCE_Region_Privilege. */ + +} MCE_RegionConfigTypeDef; + +typedef struct +{ + uint32_t Nonce[2]; /*!< MCE context nonce */ + + uint32_t Version; /*!< 16-bit long MCE context version */ + + uint32_t *pKey; /*!< Pointer at the key used for encryption/decryption */ + +} MCE_AESConfigTypeDef; + +typedef struct +{ + uint32_t KeyType; /*!< This parameter is a value of @ref MCE_KeyType. */ + + uint32_t *pKey; /*!< Pointer at the key used for encryption/decryption .*/ + +} MCE_NoekeonConfigTypeDef; + + +/** + * @brief MCE states structure definition + */ +typedef enum +{ + HAL_MCE_STATE_RESET = 0x00U, /*!< MCE not yet initialized or disabled */ + HAL_MCE_STATE_READY = 0x01U, /*!< MCE initialized and ready for use */ + HAL_MCE_STATE_BUSY = 0x02U, /*!< MCE internal processing is ongoing */ +} HAL_MCE_StateTypeDef; + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) +typedef struct __MCE_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ +{ + MCE_TypeDef *Instance; /*!< MCE registers base address */ + + HAL_MCE_StateTypeDef State; /*!< MCE state */ + + HAL_LockTypeDef Lock; /*!< MCE Locking object */ + + __IO uint32_t ErrorCode; /*!< MCE error code */ + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) + void (* ErrorCallback)(struct __MCE_HandleTypeDef *hmce); /*!< MCE error callback */ + + void (* MspInitCallback)(struct __MCE_HandleTypeDef *hmce); /*!< MCE Msp Init callback */ + + void (* MspDeInitCallback)(struct __MCE_HandleTypeDef *hmce); /*!< MCE Msp DeInit callback */ +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ + +} MCE_HandleTypeDef; + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) +/** + * @brief HAL MCE Callback ID enumeration definition + */ +typedef enum +{ + HAL_MCE_ERROR_CB_ID = 0x00U, /*!< MCE error callback ID */ + HAL_MCE_MSPINIT_CB_ID = 0x01U, /*!< MCE Msp DeInit callback ID */ + HAL_MCE_MSPDEINIT_CB_ID = 0x02U /*!< MCE Msp DeInit callback ID */ +} HAL_MCE_CallbackIDTypeDef; + +/** + * @brief HAL MCE Callback pointer definition + */ +typedef void (*pMCE_CallbackTypeDef)(MCE_HandleTypeDef *hmce); /*!< pointer to a MCE callback function */ + +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MCE_Exported_Constants MCE Exported Constants + * @{ + */ + +/** @defgroup MCE_Error_Definition MCE Error Definition + * @{ + */ +#define HAL_MCE_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_MCE_CONFIGURATION_ACCESS_ERROR ((uint32_t)0x00000001U) /*!< Configuration access error */ +#define HAL_MCE_ILLEGAL_ACCESS_READ_PRIV_ERROR ((uint32_t)0x00000002U) /*!< Illegal privileged data read or instruction fetch access error */ +#define HAL_MCE_ILLEGAL_ACCESS_READ_NPRIV_ERROR ((uint32_t)0x00000004U) /*!< Illegal unprivileged data read or instruction fetch access error */ +#define HAL_MCE_ILLEGAL_ACCESS_WRITE_PRIV_ERROR ((uint32_t)0x00000008U) /*!< Illegal privileged data write access error */ +#define HAL_MCE_ILLEGAL_ACCESS_WRITE_NPRIV_ERROR ((uint32_t)0x00000010U) /*!< Illegal un privileged data write access error */ +#define HAL_MCE_MASTER_KEY_ERROR ((uint32_t)0x00000020U) /*!< Master key error */ +#define HAL_MCE_FASTMASTER_KEY_ERROR ((uint32_t)0x00000040U) /*!< Fast master key error */ +#define HAL_MCE_CONTEXT_KEY_ERROR ((uint32_t)0x00000080U) /*!< Context key error */ +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) +#define HAL_MCE_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup MCE_Interrupts MCE Interrupts + * @{ + */ +#define MCE_IT_ILLEGAL_ACCESS_ERROR MCE_IAIER_IAEIE /*!< Illegal access error interrupt */ +#define MCE_IT_CONFIGURATION_ACCESS_ERROR MCE_IAIER_CAEIE /*!< Configuration access error interrupt */ +#define MCE_IT_ALL (MCE_IAIER_IAEIE|MCE_IAIER_CAEIE) /*!< All interrupts */ +/** + * @} + */ + +/** @defgroup MCE_Illegal_Access_Flags MCE Illegal Access Flags + * @{ + */ +#define MCE_CONFIGURATION_ACCESS_ERROR MCE_IASR_CAEF /*!< Configuration access error */ +#define MCE_ILLEGAL_ACCESS_READ_NPRIV MCE_IASR_IAEF /*!< Illegal unprivileged data read/instruction fetch access flag */ +#define MCE_ILLEGAL_ACCESS_READ_PRIV (MCE_IASR_IAEF | MCE_IAESR_IAPRIV) /*!< Illegal privileged data read/instruction fetch access flag */ +#define MCE_ILLEGAL_ACCESS_WRITE_NPRIV (MCE_IASR_IAEF | MCE_IAESR_IANRW) /*!< Illegal unprivileged write access access flag */ +#define MCE_ILLEGAL_ACCESS_WRITE_PRIV (MCE_IASR_IAEF | MCE_IAESR_IANRW | MCE_IAESR_IAPRIV) /*!< Illegal privileged write access access flag */ +/** + * @} + */ + + +/** @defgroup MCE_Regions_Index MCE Regions Index + * @{ + */ +#define MCE_REGION1 0U /*!< MCE region 1 */ +#define MCE_REGION2 1U /*!< MCE region 2 */ +#define MCE_REGION3 2U /*!< MCE region 3 */ +#define MCE_REGION4 3U /*!< MCE region 4 */ +/** + * @} + */ + +/** @defgroup MCE_Context_Index MCE Context Index + * @{ + */ +#define MCE_NO_CONTEXT 0U /*!< MCE no context */ +#define MCE_CONTEXT1 MCE_REGCR_CTXID_0 /*!< MCE context 1 */ +#define MCE_CONTEXT2 MCE_REGCR_CTXID_1 /*!< MCE context 2 */ +/** + * @} + */ + +/** @defgroup MCE_Ciphering_Algorithm MCE Ciphering Algorithm + * @{ + */ +#define MCE_NO_CIPHER 0U /*!< MCE no cipher */ +#define MCE_STREAM_CIPHER MCE_REGCR_ENC_0 /*!< MCE stream cipher */ +#define MCE_BLOCK_CIPHER MCE_REGCR_ENC_1 /*!< MCE block cipher */ +#define MCE_FASTBLOCK_CIPHER MCE_REGCR_ENC /*!< MCE fast block cipher */ +/** + * @} + */ + + +/** @defgroup MCE_Region_Privilege MCE Region Privilege + * @{ + */ +#define MCE_REGION_NPRIV 0U /*!< Region non-privileged and privileged access */ +#define MCE_REGION_PRIV MCE_REGCR_PRIV /*!< Region privileged access only */ +/** + * @} + */ + + +/** @defgroup MCE_Region_Privilege MCE Region Privilege + * @{ + */ +#define MCE_REGION_READONLY 0U /*!< Writes to region are ignored, reads are allowed */ +#define MCE_REGION_READWRITE MCE_ATTR_WREN /*!< Region can be read and written */ +/** + * @} + */ + +/** @defgroup MCE_Configuration_Attributes MCE Configuration Attributes + * @{ + */ +#define MCE_ATTRIBUTE_NPRIV 0U /*!< Non-privileged access protection */ +#define MCE_ATTRIBUTE_PRIV MCE_PRIVCFGR_PRIV /*!< Privileged access protection */ +/** + * @} + */ + +/** @defgroup MCE_Lock MCE Lock values + * @{ + */ +#define MCE_LOCK_OFF 0U /*!< No global lock set */ +#define MCE_LOCK_ON MCE_CR_GLOCK /*!< Global lock set */ +/** + * @} + */ + +/** @defgroup MCE_Lock MCE Lock values + * @{ + */ +#define MCE_MASTERKEYS_LOCK_OFF 0U /*!< No master keys lock set */ +#define MCE_MASTERKEYS_LOCK_ON MCE_CR_MKLOCK /*!< Master keys lock set */ +/** + * @} + */ + +/** @defgroup MCE_KeyType key type used for encryption, Master key or Fast Master key + * @{ + */ +#define MCE_USE_MASTERKEYS 0U /*!< Master keys used for encryption */ +#define MCE_USE_FASTMASTERKEYS 1U /*!< Fast Master keys used for encryption */ +/** + * @} + */ + + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup MCE_Exported_Macros MCE Exported Macros + * @{ + */ + +/** @brief Reset MCE handle state. + * @param __HANDLE__ pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval None + */ +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) +#define __HAL_MCE_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_MCE_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_MCE_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_MCE_STATE_RESET) +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ + +/** + * @brief Enable MCE peripheral interrupts combination + * @param __HANDLE__ pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param __INTERRUPT__ mask on enabled interrupts + * This parameter can be one of the following values: + * @arg @ref MCE_IT_ILLEGAL_ACCESS_ERROR MCE illegal access error interrupt + * @arg @ref MCE_IT_CONFIGURATION_ACCESS_ERROR MCE configuration access error interrupt + * @arg @ref MCE_IT_ALL MCE all interrupts + * @retval None + */ +#define __HAL_MCE_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(((__HANDLE__)->Instance->IAIER), (__INTERRUPT__)) + +/** + * @brief Disable MCE peripheral interrupts combination + * @param __HANDLE__ pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param __INTERRUPT__ mask on disabled interrupts + * This parameter can be one of the following values: + * @arg @ref MCE_IT_ILLEGAL_ACCESS_ERROR MCE illegal access error interrupt + * @arg @ref MCE_IT_CONFIGURATION_ACCESS_ERROR MCE configuration access error interrupt + * @arg @ref MCE_IT_ALL MCE all interrupts + * @retval None + */ +#define __HAL_MCE_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(((__HANDLE__)->Instance->IAIER), (__INTERRUPT__)) + + +/** + * @brief Get MCE peripheral access error flag + * @param __HANDLE__ pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param __FLAG__ access error flag to check + * This parameter can be one of the following values: + * @arg @ref MCE_CONFIGURATION_ACCESS_ERROR MCE configuration access error flag + * @arg @ref MCE_ILLEGAL_ACCESS_READ_NPRIV MCE illegal unprivileged data read/instruction fetch access flag + * @arg @ref MCE_ILLEGAL_ACCESS_READ_PRIV MCE illegal privileged data read/instruction fetch access flag + * @arg @ref MCE_ILLEGAL_ACCESS_WRITE_NPRIV MCE illegal unprivileged write access access flag + * @arg @ref MCE_ILLEGAL_ACCESS_WRITE_PRIV MCE illegal privileged write access access flag + * @retval 0 (not set) or 1 (set) + */ +#define __HAL_MCE_GET_FLAG(__HANDLE__, __FLAG__) \ + (((__FLAG__) == MCE_CONFIGURATION_ACCESS_ERROR) ? \ + (READ_BIT((__HANDLE__)->Instance->IASR, MCE_IASR_CAEF) == MCE_IASR_CAEF) : \ + ((READ_BIT((__HANDLE__)->Instance->IASR, MCE_IASR_IAEF) == MCE_IASR_IAEF) && \ + (READ_BIT((__HANDLE__)->Instance->IAESR, ((__FLAG__) & ~MCE_IASR_IAEF)) == ((__FLAG__) & ~MCE_IASR_IAEF)))) + + + +/** + * @brief Clear MCE peripheral illegal/configuration access flag + * @param __HANDLE__ pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param __FLAG__ illegal access flag to check + * This parameter can be one of the following values: + * @arg @ref MCE_CONFIGURATION_ACCESS_ERROR MCE configuration access error flag + * @arg @ref MCE_ILLEGAL_ACCESS_READ_NPRIV MCE illegal unprivileged data read/instruction fetch access flag + * @arg @ref MCE_ILLEGAL_ACCESS_READ_PRIV MCE illegal privileged data read/instruction fetch access flag + * @arg @ref MCE_ILLEGAL_ACCESS_WRITE_NPRIV MCE illegal unprivileged write access access flag + * @arg @ref MCE_ILLEGAL_ACCESS_WRITE_PRIV MCE illegal privileged write access access flag + * @retval 0 (not set) or 1 (set) + */ +#define __HAL_MCE_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__FLAG__) == MCE_CONFIGURATION_ACCESS_ERROR) ? WRITE_REG(((__HANDLE__)->Instance->IACR), MCE_IACR_CAEF) : \ + WRITE_REG(((__HANDLE__)->Instance->IACR), MCE_IACR_IAEF)) + + +/** + * @} + */ + + + + +/* Exported functions ---------------------------------------------------------*/ + + +HAL_StatusTypeDef HAL_MCE_Init(MCE_HandleTypeDef *hmce); +HAL_StatusTypeDef HAL_MCE_DeInit(MCE_HandleTypeDef *hmce); +void HAL_MCE_MspInit(MCE_HandleTypeDef *hmce); +void HAL_MCE_MspDeInit(MCE_HandleTypeDef *hmce); + + +HAL_StatusTypeDef HAL_MCE_ConfigNoekeon(MCE_HandleTypeDef *hmce, const MCE_NoekeonConfigTypeDef *pConfig); +HAL_StatusTypeDef HAL_MCE_ConfigAESContext(MCE_HandleTypeDef *hmce, const MCE_AESConfigTypeDef *AESConfig, + uint32_t ContextIndex); +HAL_StatusTypeDef HAL_MCE_ConfigRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex, + const MCE_RegionConfigTypeDef *pConfig); +HAL_StatusTypeDef HAL_MCE_SetRegionAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex, uint32_t RegionIndex); +HAL_StatusTypeDef HAL_MCE_EnableAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex); +HAL_StatusTypeDef HAL_MCE_DisableAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex); +HAL_StatusTypeDef HAL_MCE_EnableRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex); +HAL_StatusTypeDef HAL_MCE_DisableRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex); +HAL_StatusTypeDef HAL_MCE_LockGlobalConfig(MCE_HandleTypeDef *hmce); +HAL_StatusTypeDef HAL_MCE_LockAESContextConfig(MCE_HandleTypeDef *hmce, uint32_t ContextIndex); +HAL_StatusTypeDef HAL_MCE_LockAESContextKey(MCE_HandleTypeDef *hmce, uint32_t ContextIndex); +HAL_StatusTypeDef HAL_MCE_LockNoekeonMasterKeys(MCE_HandleTypeDef *hmce); +HAL_StatusTypeDef HAL_MCE_LockNoekeonFastKeys(MCE_HandleTypeDef *hmce); +HAL_StatusTypeDef HAL_MCE_GetAESContextCRCKey(const MCE_HandleTypeDef *hmce, uint32_t *pCRCKey, uint32_t ContextIndex); + + +void HAL_MCE_IRQHandler(MCE_HandleTypeDef *hmce); +void HAL_MCE_ErrorCallback(MCE_HandleTypeDef *hmce); + +HAL_MCE_StateTypeDef HAL_MCE_GetState(MCE_HandleTypeDef const *hmce); +uint32_t HAL_MCE_GetError(MCE_HandleTypeDef const *hmce); +uint32_t HAL_MCE_KeyCRCComputation(const uint32_t *pKey); + +#define IS_MCE_INTERRUPT(__INTERRUPT__) (((__INTERRUPT__) == MCE_IT_ILLEGAL_ACCESS_ERROR) || \ + ((__INTERRUPT__) == MCE_IT_CONFIGURATION_ACCESS_ERROR) || \ + ((__INTERRUPT__) == MCE_IT_ALL) ) + +/** + * @brief Verify the MCE region index. + * @param __INDEX__ MCE region index + * @retval SET (__INDEX__ is valid) or RESET (__INDEX__ is invalid) + */ +#define IS_MCE_REGIONINDEX(__INDEX__) (((__INDEX__) == MCE_REGION1) || \ + ((__INDEX__) == MCE_REGION2) || \ + ((__INDEX__) == MCE_REGION3) || \ + ((__INDEX__) == MCE_REGION4)) + +/** + * @brief Verify the MCE configuration attributes. + * @param __ATTRIBUTE__ MCE region index + * @retval SET (__ATTRIBUTE__ is valid) or RESET (__ATTRIBUTE__ is invalid) + */ +#define IS_MCE_ATTRIBUTE(__ATTRIBUTE__) (((__ATTRIBUTE__) == MCE_ATTRIBUTE_PRIV) || \ + ((__ATTRIBUTE__) == MCE_ATTRIBUTE_NPRIV)) + +/** + * @brief Verify the MCE region privilege attribute. + * @param __PRIVILEGED__ MCE region privilege attribute + * @retval SET (__PRIVILEGED__ is valid) or RESET (__PRIVILEGED__ is invalid) + */ +#define IS_MCE_REGIONPRIVILEGED(__PRIVILEGED__) (((__PRIVILEGED__) == MCE_REGION_NPRIV) || \ + ((__PRIVILEGED__) == MCE_REGION_PRIV)) + +/** + * @brief Verify the MCE region write enable attribute. + * @param __WRITE__ MCE region write enable attribute + * @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid) + */ +#define IS_MCE_WRITE(__WRITE__) (((__WRITE__) == MCE_REGION_READONLY) || \ + ((__WRITE__) == MCE_REGION_READWRITE)) + +/** + * @brief Verify the MCE region context. + * @param __INSTANCE__ MCE instance + * @param __CONTEXT__ MCE region context + * @retval SET (__CONTEXT__ is valid) or RESET (__CONTEXT__ is invalid) + */ +#define IS_MCE_CONTEXT(__INSTANCE__, __CONTEXT__) (((__INSTANCE__) == (MCE1)) ? \ + (((__CONTEXT__) == MCE_NO_CONTEXT) || \ + ((__CONTEXT__) == MCE_CONTEXT1) || \ + ((__CONTEXT__) == MCE_CONTEXT2)) : \ + ((__CONTEXT__) == MCE_NO_CONTEXT)) + +/** + * @brief Verify the MCE region algorithm. + * @param __INSTANCE__ MCE instance + * @param __ALGO__ MCE region context + * @retval SET (__ALGO__ is valid) or RESET (__ALGO__ is invalid) + */ +#define IS_MCE_ALGORITHM(__INSTANCE__, __ALGO__) (((__INSTANCE__) == (MCE1)) ? \ + (((__ALGO__) == MCE_NO_CIPHER) || \ + ((__ALGO__) == MCE_STREAM_CIPHER) || \ + ((__ALGO__) == MCE_BLOCK_CIPHER) || \ + ((__ALGO__) == MCE_FASTBLOCK_CIPHER)) : \ + (((__ALGO__) == MCE_NO_CIPHER) || \ + ((__ALGO__) == MCE_BLOCK_CIPHER) || \ + ((__ALGO__) == MCE_FASTBLOCK_CIPHER))) + + + +#endif /* MCE1 */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_MCE_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdf.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdf.h new file mode 100644 index 000000000..1c361360d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdf.h @@ -0,0 +1,781 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mdf.h + * @author MCD Application Team + * @brief Header file of MDF HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_MDF_H +#define STM32H7RSxx_HAL_MDF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup MDF + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MDF_Exported_Types MDF Exported Types + * @{ + */ + +/** + * @brief HAL MDF states definition + */ +typedef enum +{ + HAL_MDF_STATE_RESET = 0x00U, /*!< MDF not initialized */ + HAL_MDF_STATE_READY = 0x01U, /*!< MDF initialized and ready for use */ + HAL_MDF_STATE_ACQUISITION = 0x02U, /*!< MDF acquisition in progress */ + HAL_MDF_STATE_ERROR = 0xFFU /*!< MDF state error */ +} HAL_MDF_StateTypeDef; + +/** + * @brief MDF clock trigger structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Output clock trigger enable/disable */ + uint32_t Source; /*!< Output clock trigger source. + This parameter can be a value of @ref MDF_ClockTriggerSource */ + uint32_t Edge; /*!< Output clock trigger edge. + This parameter can be a value of @ref MDF_ClockTriggerEdge */ +} MDF_ClockTriggerTypeDef; + +/** + * @brief MDF output clock structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Output clock enable/disable */ + uint32_t Pins; /*!< Output clock pins. + This parameter can be a value of @ref MDF_OuputClockPins */ + uint32_t Divider; /*!< Output clock divider. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ + MDF_ClockTriggerTypeDef Trigger; /*!< Output clock trigger parameters */ +} MDF_OutputClockTypeDef; + +/** + * @brief MDF common parameters structure definition + */ +typedef struct +{ + uint32_t ProcClockDivider; /*!< Processing clock divider. + This parameter must be a number between Min_Data = 1 + and Max_Data = 128 */ + MDF_OutputClockTypeDef OutputClock; /*!< Output clock parameters */ +} MDF_CommonParamTypeDef; + +/** + * @brief MDF serial interface structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Serial interface enable/disable */ + uint32_t Mode; /*!< Serial interface mode. + This parameter can be a value of @ref MDF_SitfMode */ + uint32_t ClockSource; /*!< Serial interface clock source. + This parameter can be a value of @ref MDF_SitfClockSource */ + uint32_t Threshold; /*!< SPI threshold for clock absence detection or Manchester symbol threshold. + This parameter must be a number between Min_Data = 4 and Max_Data = 31 */ +} MDF_SerialInterfaceTypeDef; + +/** + * @brief MDF init structure definition + */ +typedef struct +{ + MDF_CommonParamTypeDef CommonParam; /*!< MDF common parameters */ + MDF_SerialInterfaceTypeDef SerialInterface; /*!< MDF serial interface parameters */ + uint32_t FilterBistream; /*!< MDF filter bitstream selection. + This parameter can be a value of @ref MDF_FilterBitstream */ +} MDF_InitTypeDef; + +/** + * @brief MDF handle structure definition + */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +typedef struct __MDF_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +{ + MDF_Filter_TypeDef *Instance; /*!< MDF instance */ + MDF_InitTypeDef Init; /*!< MDF init parameters */ + DMA_HandleTypeDef *hdma; /*!< Pointer on DMA handler for acquisitions */ + __IO HAL_MDF_StateTypeDef State; /*!< MDF state */ + __IO uint32_t ErrorCode; /*!< MDF error code */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + void (*AcqCpltCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF acquisition complete callback */ + void (*AcqHalfCpltCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF acquisition half complete callback */ + void (*SndLvCallback)(struct __MDF_HandleTypeDef *hmdf, + uint32_t SoundLevel, + uint32_t AmbientNoise); /*!< MDF sound level callback */ + void (*SadCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF sound activity detector callback */ + void (*ErrorCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF error callback */ + void (*MspInitCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF MSP init callback */ + void (*MspDeInitCallback)(struct __MDF_HandleTypeDef *hmdf); /*!< MDF MSP de-init callback */ +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +} MDF_HandleTypeDef; + +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +/** + * @brief MDF callback ID enumeration definition + */ +typedef enum +{ + HAL_MDF_ACQ_COMPLETE_CB_ID = 0x01U, /*!< MDF acquisition complete callback ID */ + HAL_MDF_ACQ_HALFCOMPLETE_CB_ID = 0x02U, /*!< MDF acquisition half complete callback ID */ + HAL_MDF_SNDLVL_CB_ID = 0x03U, /*!< MDF sound level callback ID */ + HAL_MDF_SAD_CB_ID = 0x04U, /*!< MDF sound activity detector callback ID */ + HAL_MDF_ERROR_CB_ID = 0x05U, /*!< MDF error callback ID */ + HAL_MDF_MSPINIT_CB_ID = 0x06U, /*!< MDF MSP init callback ID */ + HAL_MDF_MSPDEINIT_CB_ID = 0x07U /*!< MDF MSP de-init callback ID */ +} HAL_MDF_CallbackIDTypeDef; + +/** + * @brief MDF callback pointers definition + */ +typedef void (*pMDF_CallbackTypeDef)(MDF_HandleTypeDef *hmdf); +typedef void (*pMDF_SndLvlCallbackTypeDef)(MDF_HandleTypeDef *hmdf, uint32_t SoundLevel, uint32_t AmbientNoise); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + +/** + * @brief MDF reshape filter structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Reshape filter enable/disable */ + uint32_t DecimationRatio; /*!< Reshape filter decimation ratio. + This parameter can be a value of @ref MDF_ReshapeDecimationRatio */ +} MDF_ReshapeFilterTypeDef; + +/** + * @brief MDF high pass filter structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< High pass filter enable/disable */ + uint32_t CutOffFrequency; /*!< High pass filter cut-off frequency. + This parameter can be a value of @ref MDF_HighPassCutOffFreq */ +} MDF_HighPassFilterTypeDef; + +/** + * @brief MDF sound activity structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Sound activity detector enable/disable */ + uint32_t Mode; /*!< Sound activity detector mode. + This parameter can be a value of @ref MDF_SadMode */ + uint32_t FrameSize; /*!< Size of one frame to compute short-term signal level. + This parameter can be a value of @ref MDF_SadFrameSize */ + FunctionalState Hysteresis; /*!< Hysteresis enable/disable. + @note This parameter is not used if Mode is set + to MDF_SAD_AMBIENT_NOISE_ESTIMATOR */ + uint32_t SoundTriggerEvent; /*!< Sound trigger event configuration. + This parameter can be a value of @ref MDF_SadSoundTriggerEvent */ + uint32_t DataMemoryTransfer; /*!< Data memory transfer mode. + This parameter can be a value of @ref MDF_SadDataMemoryTransfer */ + uint32_t MinNoiseLevel; /*!< Minimum noise level. + This parameter must be a number between Min_Data = 0 + and Max_Data = 8191 */ + uint32_t HangoverWindow; /*!< Hangover time window in frames. + This parameter can be a value of @ref MDF_SadHangoverWindow */ + uint32_t LearningFrames; /*!< Number of learning frames for the first estimation of noise level. + This parameter can be a value of @ref MDF_SadLearningFrames */ + uint32_t AmbientNoiseSlope; /*!< Ambient noise slope control. + This parameter must be a number between Min_Data = 0 and Max_Data = 7. + @note This parameter is not used if Mode is set + to MDF_SAD_SOUND_DETECTOR */ + uint32_t SignalNoiseThreshold; /*!< Signal to noise threshold. + This parameter can be a value of @ref MDF_SadSignalNoiseThreshold */ + FunctionalState SoundLevelInterrupt; /*!< Sound level interrupt enable/disable. + @note This interrupt is mainly used for debug purpose */ +} MDF_SoundActivityTypeDef; + +/** + * @brief MDF filter trigger structure definition + */ +typedef struct +{ + uint32_t Source; /*!< Filter trigger source. + This parameter can be a value of @ref MDF_FilterTriggerSource */ + uint32_t Edge; /*!< Filter trigger edge. + This parameter can be a value of @ref MDF_FilterTriggerEdge */ +} MDF_FilterTriggerTypeDef; + +/** + * @brief MDF filter configuration structure definition + */ +typedef struct +{ + uint32_t DataSource; /*!< Filter data source. + This parameter can be a value of @ref MDF_DataSource */ + uint32_t Delay; /*!< Delay to apply on data source in number of samples. + This parameter must be a number between Min_Data = 0 + and Max_Data = 127 */ + uint32_t CicMode; /*!< CIC filter mode. + This parameter can be a value of @ref MDF_CicMode */ + uint32_t DecimationRatio; /*!< Filter decimation ratio. + This parameter must be a number between Min_Data = 2 + and Max_Data = 512 */ + int32_t Gain; /*!< Filter gain in step of around 3db (from -48db to 72dB). + This parameter must be a number between Min_Data = -16 + and Max_Data = 24 */ + MDF_ReshapeFilterTypeDef ReshapeFilter; /*!< Reshape filter configuration */ + MDF_HighPassFilterTypeDef HighPassFilter; /*!< High pass filter configuration */ + MDF_SoundActivityTypeDef SoundActivity; /*!< Sound activity detector configuration */ + uint32_t AcquisitionMode; /*!< Filter acquisition mode. + This parameter can be a value of @ref MDF_AcquisitionMode */ + uint32_t FifoThreshold; /*!< Filter RXFIFO threshold. + This parameter can be a value of @ref MDF_FifoThreshold */ + uint32_t DiscardSamples; /*!< Number of samples to discard after filter enable. + This parameter must be a number between Min_Data = 0 + and Max_Data = 255 */ + MDF_FilterTriggerTypeDef Trigger; /*!< Filter trigger configuration. + @note This parameter is not used if AcquisitionMode is set + to MDF_MODE_ASYNC_CONT or MDF_MODE_ASYNC_SINGLE */ +} MDF_FilterConfigTypeDef; + +/** + * @brief MDF DMA configuration structure definition + */ +typedef struct +{ + uint32_t Address; /*!< DMA destination address */ + uint32_t DataLength; /*!< Length of data to transfer in bytes */ + FunctionalState MsbOnly; /*!< Transfer only the 16MSB of the acquistion data */ +} MDF_DmaConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MDF_Exported_Constants MDF Exported Constants + * @{ + */ + +/** @defgroup MDF_ErrorCode MDF error code + * @{ + */ +#define MDF_ERROR_NONE 0x00000000U /*!< No error */ +#define MDF_ERROR_ACQUISITION_OVERFLOW 0x00000001U /*!< Overflow occurs during acquisition */ +#define MDF_ERROR_RSF_OVERRUN 0x00000002U /*!< Overrun occurs on reshape filter */ +#define MDF_ERROR_CLOCK_ABSENCE 0x00000004U /*!< Clock absence detection occurs */ +#define MDF_ERROR_SATURATION 0x00000010U /*!< Saturation detection occurs */ +#define MDF_ERROR_DMA 0x00000040U /*!< DMA error occurs */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +#define MDF_ERROR_INVALID_CALLBACK 0x00000080U /*!< Invalid callback error occurs */ +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup MDF_ClockTriggerSource MDF output clock trigger source + * @{ + */ +#define MDF_CLOCK_TRIG_TRGO 0x00000000U +#define MDF_CLOCK_TRIG_EXTI15 MDF_CKGCR_TRGSRC_1 +/** + * @} + */ + +/** @defgroup MDF_ClockTriggerEdge MDF output clock trigger edge + * @{ + */ +#define MDF_CLOCK_TRIG_RISING_EDGE 0x00000000U /*!< Rising edge */ +#define MDF_CLOCK_TRIG_FALLING_EDGE MDF_CKGCR_TRGSENS /*!< Falling edge */ +/** + * @} + */ + +/** @defgroup MDF_OuputClockPins MDF output clock pins + * @{ + */ +#define MDF_OUTPUT_CLOCK_0 MDF_CKGCR_CCK0DIR /*!< MDF_CCK0 is used as output clock */ +#define MDF_OUTPUT_CLOCK_1 MDF_CKGCR_CCK1DIR /*!< MDF_CCK1 is used as output clock */ +#define MDF_OUTPUT_CLOCK_ALL (MDF_CKGCR_CCK0DIR | \ + MDF_CKGCR_CCK1DIR) /*!< MDF_CCK0 and MDF_CCK1 are used as output clock */ +/** + * @} + */ + +/** @defgroup MDF_SitfMode MDF serial interface mode + * @{ + */ +#define MDF_SITF_LF_MASTER_SPI_MODE 0x00000000U /*!< Low frequency master SPI mode */ +#define MDF_SITF_NORMAL_SPI_MODE MDF_SITFCR_SITFMOD_0 /*!< Normal SPI mode */ +#define MDF_SITF_MANCHESTER_FALLING_MODE MDF_SITFCR_SITFMOD_1 /*!< Manchester mode rising edge logic 0 + and falling edge logic 1 */ +#define MDF_SITF_MANCHESTER_RISING_MODE MDF_SITFCR_SITFMOD /*!< Manchester mode rising edge logic 1 + and falling edge logic 0 */ +/** + * @} + */ + +/** @defgroup MDF_SitfClockSource MDF serial interface clock source + * @{ + */ +#define MDF_SITF_CCK0_SOURCE 0x00000000U /*!< Common clock 0 source */ +#define MDF_SITF_CCK1_SOURCE MDF_SITFCR_SCKSRC_0 /*!< Common clock 1 source */ +/** + * @} + */ + +/** @defgroup MDF_FilterBitstream MDF filter bitstream + * @{ + */ +#define MDF_BITSTREAM0_RISING 0x00000000U +#define MDF_BITSTREAM0_FALLING MDF_BSMXCR_BSSEL_0 +/** + * @} + */ + +/** @defgroup MDF_ReshapeDecimationRatio MDF reshape filter decimation ratio + * @{ + */ +#define MDF_RSF_DECIMATION_RATIO_4 0x00000000U /*!< Reshape filter decimation ratio is 4 */ +#define MDF_RSF_DECIMATION_RATIO_1 MDF_DFLTRSFR_RSFLTD /*!< Reshape filter decimation ratio is 1 */ +/** + * @} + */ + +/** @defgroup MDF_HighPassCutOffFreq MDF high pass filter cut-off frequency + * @{ + */ +#define MDF_HPF_CUTOFF_0_000625FPCM 0x00000000U /*!< Cut-off frequency of 0.000625xFpcm */ +#define MDF_HPF_CUTOFF_0_00125FPCM MDF_DFLTRSFR_HPFC_0 /*!< Cut-off frequency of 0.00125xFpcm */ +#define MDF_HPF_CUTOFF_0_0025FPCM MDF_DFLTRSFR_HPFC_1 /*!< Cut-off frequency of 0.0025xFpcm */ +#define MDF_HPF_CUTOFF_0_0095FPCM MDF_DFLTRSFR_HPFC /*!< Cut-off frequency of 0.0095xFpcm */ +/** + * @} + */ + +/** @defgroup MDF_SadMode MDF sound activity detector mode + * @{ + */ +#define MDF_SAD_VOICE_ACTIVITY_DETECTOR 0x00000000U /*!< Voice activity detector */ +#define MDF_SAD_SOUND_DETECTOR MDF_SADCR_SADMOD_0 /*!< Sound detector */ +#define MDF_SAD_AMBIENT_NOISE_DETECTOR MDF_SADCR_SADMOD /*!< Ambient noise detector */ +/** + * @} + */ + +/** @defgroup MDF_SadFrameSize MDF sound activity detector frame size + * @{ + */ +#define MDF_SAD_8_PCM_SAMPLES 0x00000000U /*!< Frame size of 8 PCM samples */ +#define MDF_SAD_16_PCM_SAMPLES MDF_SADCR_FRSIZE_0 /*!< Frame size of 16 PCM samples */ +#define MDF_SAD_32_PCM_SAMPLES MDF_SADCR_FRSIZE_1 /*!< Frame size of 32 PCM samples */ +#define MDF_SAD_64_PCM_SAMPLES (MDF_SADCR_FRSIZE_0 | MDF_SADCR_FRSIZE_1) /*!< Frame size of 64 PCM samples */ +#define MDF_SAD_128_PCM_SAMPLES MDF_SADCR_FRSIZE_2 /*!< Frame size of 128 PCM samples */ +#define MDF_SAD_256_PCM_SAMPLES (MDF_SADCR_FRSIZE_0 | MDF_SADCR_FRSIZE_2) /*!< Frame size of 256 PCM samples */ +#define MDF_SAD_512_PCM_SAMPLES MDF_SADCR_FRSIZE /*!< Frame size of 512 PCM samples */ +/** + * @} + */ + +/** @defgroup MDF_SadSoundTriggerEvent MDF sound activity detector trigger event + * @{ + */ +#define MDF_SAD_ENTER_DETECT 0x00000000U /*!< Event when SAD enters in detect state */ +#define MDF_SAD_ENTER_EXIT_DETECT MDF_SADCR_DETCFG /*!< Event when SAD enters or exits from detect state */ +/** + * @} + */ + +/** @defgroup MDF_SadDataMemoryTransfer MDF sound activity detector data memory transfer mode + * @{ + */ +#define MDF_SAD_NO_MEMORY_TRANSFER 0x00000000U /*!< No memory transfer */ +#define MDF_SAD_MEMORY_TRANSFER_IN_DETECT MDF_SADCR_DATCAP_0 /*!< Memory transfer only in detect state */ +#define MDF_SAD_MEMORY_TRANSFER_ALWAYS MDF_SADCR_DATCAP /*!< Memory transfer always */ +/** + * @} + */ + +/** @defgroup MDF_SadHangoverWindow MDF sound activity detector data hangover time window + * @{ + */ +#define MDF_SAD_HANGOVER_4_FRAMES 0x00000000U /*!< Hangover window of 4 frames */ +#define MDF_SAD_HANGOVER_8_FRAMES MDF_SADCFGR_HGOVR_0 /*!< Hangover window of 8 frames */ +#define MDF_SAD_HANGOVER_16_FRAMES MDF_SADCFGR_HGOVR_1 /*!< Hangover window of 16 frames */ +#define MDF_SAD_HANGOVER_32_FRAMES (MDF_SADCFGR_HGOVR_0 | \ + MDF_SADCFGR_HGOVR_1) /*!< Hangover window of 32 frames */ +#define MDF_SAD_HANGOVER_64_FRAMES MDF_SADCFGR_HGOVR_2 /*!< Hangover window of 64 frames */ +#define MDF_SAD_HANGOVER_128_FRAMES (MDF_SADCFGR_HGOVR_0 | \ + MDF_SADCFGR_HGOVR_2) /*!< Hangover window of 128 frames */ +#define MDF_SAD_HANGOVER_256_FRAMES (MDF_SADCFGR_HGOVR_1 | \ + MDF_SADCFGR_HGOVR_2) /*!< Hangover window of 256 frames */ +#define MDF_SAD_HANGOVER_512_FRAMES (MDF_SADCFGR_HGOVR_0 | \ + MDF_SADCFGR_HGOVR_1 | \ + MDF_SADCFGR_HGOVR_2) /*!< Hangover window of 512 frames */ +/** + * @} + */ + +/** @defgroup MDF_SadLearningFrames MDF sound activity detector data learning frames + * @{ + */ +#define MDF_SAD_LEARNING_2_FRAMES 0x00000000U /*!< 2 learning frames */ +#define MDF_SAD_LEARNING_4_FRAMES MDF_SADCFGR_LFRNB_0 /*!< 4 learning frames */ +#define MDF_SAD_LEARNING_8_FRAMES MDF_SADCFGR_LFRNB_1 /*!< 8 learning frames */ +#define MDF_SAD_LEARNING_16_FRAMES (MDF_SADCFGR_LFRNB_0 | MDF_SADCFGR_LFRNB_1) /*!< 16 learning frames */ +#define MDF_SAD_LEARNING_32_FRAMES MDF_SADCFGR_LFRNB /*!< 32 learning frames */ +/** + * @} + */ + +/** @defgroup MDF_SadSignalNoiseThreshold MDF sound activity detector data signal to noise threshold + * @{ + */ +#define MDF_SAD_SIGNAL_NOISE_3_5DB 0x00000000U /*!< Signal to noise threshold is 3.5dB */ +#define MDF_SAD_SIGNAL_NOISE_6DB MDF_SADCFGR_SNTHR_0 /*!< Signal to noise threshold is 6dB */ +#define MDF_SAD_SIGNAL_NOISE_9_5DB MDF_SADCFGR_SNTHR_1 /*!< Signal to noise threshold is 9.5dB */ +#define MDF_SAD_SIGNAL_NOISE_12DB (MDF_SADCFGR_SNTHR_0 | \ + MDF_SADCFGR_SNTHR_1) /*!< Signal to noise threshold is 12dB */ +#define MDF_SAD_SIGNAL_NOISE_15_6DB MDF_SADCFGR_SNTHR_2 /*!< Signal to noise threshold is 15.6dB */ +#define MDF_SAD_SIGNAL_NOISE_18DB (MDF_SADCFGR_SNTHR_0 | \ + MDF_SADCFGR_SNTHR_2) /*!< Signal to noise threshold is 18dB */ +#define MDF_SAD_SIGNAL_NOISE_21_6DB (MDF_SADCFGR_SNTHR_1 | \ + MDF_SADCFGR_SNTHR_2) /*!< Signal to noise threshold is 21.6dB */ +#define MDF_SAD_SIGNAL_NOISE_24_1DB (MDF_SADCFGR_SNTHR_0 | \ + MDF_SADCFGR_SNTHR_1 | \ + MDF_SADCFGR_SNTHR_2) /*!< Signal to noise threshold is 24.1dB */ +#define MDF_SAD_SIGNAL_NOISE_27_6DB MDF_SADCFGR_SNTHR_3 /*!< Signal to noise threshold is 27.6dB */ +#define MDF_SAD_SIGNAL_NOISE_30_1DB (MDF_SADCFGR_SNTHR_0 | \ + MDF_SADCFGR_SNTHR_3) /*!< Signal to noise threshold is 30.1dB */ +/** + * @} + */ + +/** @defgroup MDF_FilterTriggerSource MDF filter trigger source + * @{ + */ +#define MDF_FILTER_TRIG_TRGO 0x00000000U +#define MDF_FILTER_TRIG_EXTI15 MDF_DFLTCR_TRGSRC_1 +/** + * @} + */ + +/** @defgroup MDF_FilterTriggerEdge MDF filter trigger edge + * @{ + */ +#define MDF_FILTER_TRIG_RISING_EDGE 0x00000000U /*!< Rising edge */ +#define MDF_FILTER_TRIG_FALLING_EDGE MDF_DFLTCR_TRGSENS /*!< Falling edge */ +/** + * @} + */ + +/** @defgroup MDF_DataSource MDF data source + * @{ + */ +#define MDF_DATA_SOURCE_BSMX 0x00000000U /*!< Data from bitstream matrix */ +#define MDF_DATA_SOURCE_ADCITF1 MDF_DFLTCICR_DATSRC_1 /*!< Data from ADC interface 1 */ +#define MDF_DATA_SOURCE_ADCITF2 MDF_DFLTCICR_DATSRC /*!< Data from ADC interface 2 */ +/** + * @} + */ + +/** @defgroup MDF_CicMode MDF CIC mode + * @{ + */ +#define MDF_ONE_FILTER_SINC4 MDF_DFLTCICR_CICMOD_2 /*!< One filter in Sinc4 order */ +#define MDF_ONE_FILTER_SINC5 (MDF_DFLTCICR_CICMOD_0 | \ + MDF_DFLTCICR_CICMOD_2) /*!< One filter in Sinc5 order */ +/** + * @} + */ + +/** @defgroup MDF_AcquisitionMode MDF acquisition mode + * @{ + */ +#define MDF_MODE_ASYNC_CONT 0x00000000U /*!< Asynchronous, continuous acquisition mode */ +#define MDF_MODE_ASYNC_SINGLE MDF_DFLTCR_ACQMOD_0 /*!< Asynchronous, single-shot acquisition mode. + @note Not available with SAD usage */ +#define MDF_MODE_SYNC_CONT MDF_DFLTCR_ACQMOD_1 /*!< Synchronous, continuous acquisition mode */ +#define MDF_MODE_SYNC_SINGLE (MDF_DFLTCR_ACQMOD_0 | \ + MDF_DFLTCR_ACQMOD_1) /*!< Synchronous, single-shot acquisition mode. + @note Not available with SAD usage */ +#define MDF_MODE_WINDOW_CONT MDF_DFLTCR_ACQMOD_2 /*!< Window, continuous acquisition mode. + @note Not available with SAD usage */ +/** + * @} + */ + +/** @defgroup MDF_FifoThreshold MDF RXFIFO threshold + * @{ + */ +#define MDF_FIFO_THRESHOLD_NOT_EMPTY 0x00000000U /*!< Event generated when RXFIFO is not empty */ +#define MDF_FIFO_THRESHOLD_HALF_FULL MDF_DFLTCR_FTH /*!< Event generated when RXFIFO is half_full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup MDF_Exported_Macros MDF Exported Macros + * @{ + */ + +/** @brief Reset MDF handle state. + * @param __HANDLE__ MDF handle. + * @retval None + */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +#define __HAL_MDF_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_MDF_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ +#define __HAL_MDF_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MDF_STATE_RESET) +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup MDF_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup MDF_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_MDF_Init(MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_DeInit(MDF_HandleTypeDef *hmdf); +void HAL_MDF_MspInit(MDF_HandleTypeDef *hmdf); +void HAL_MDF_MspDeInit(MDF_HandleTypeDef *hmdf); +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_MDF_RegisterCallback(MDF_HandleTypeDef *hmdf, + HAL_MDF_CallbackIDTypeDef CallbackID, + pMDF_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_MDF_UnRegisterCallback(MDF_HandleTypeDef *hmdf, + HAL_MDF_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_MDF_RegisterSndLvlCallback(MDF_HandleTypeDef *hmdf, + pMDF_SndLvlCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_MDF_UnRegisterSndLvlCallback(MDF_HandleTypeDef *hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Acquisition functions *****************************************************/ +/** @addtogroup MDF_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_MDF_AcqStart(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_MDF_PollForAcq(MDF_HandleTypeDef *hmdf, uint32_t Timeout); +HAL_StatusTypeDef HAL_MDF_GetAcqValue(const MDF_HandleTypeDef *hmdf, int32_t *pValue); +HAL_StatusTypeDef HAL_MDF_AcqStop(MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_AcqStart_IT(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_MDF_AcqStop_IT(MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_AcqStart_DMA(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig, + const MDF_DmaConfigTypeDef *pDmaConfig); +HAL_StatusTypeDef HAL_MDF_AcqStop_DMA(MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_GenerateTrgo(const MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_SetDelay(MDF_HandleTypeDef *hmdf, uint32_t Delay); +HAL_StatusTypeDef HAL_MDF_GetDelay(const MDF_HandleTypeDef *hmdf, uint32_t *pDelay); +HAL_StatusTypeDef HAL_MDF_SetGain(MDF_HandleTypeDef *hmdf, int32_t Gain); +HAL_StatusTypeDef HAL_MDF_GetGain(const MDF_HandleTypeDef *hmdf, int32_t *pGain); +HAL_StatusTypeDef HAL_MDF_PollForSndLvl(MDF_HandleTypeDef *hmdf, uint32_t Timeout, uint32_t *pSoundLevel, + uint32_t *pAmbientNoise); +HAL_StatusTypeDef HAL_MDF_PollForSad(MDF_HandleTypeDef *hmdf, uint32_t Timeout); +void HAL_MDF_AcqCpltCallback(MDF_HandleTypeDef *hmdf); +void HAL_MDF_AcqHalfCpltCallback(MDF_HandleTypeDef *hmdf); +void HAL_MDF_SndLvlCallback(MDF_HandleTypeDef *hmdf, uint32_t SoundLevel, uint32_t AmbientNoise); +void HAL_MDF_SadCallback(MDF_HandleTypeDef *hmdf); +/** + * @} + */ + +/* Clock absence detection functions *****************************************/ +/** @addtogroup MDF_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_MDF_PollForCkab(MDF_HandleTypeDef *hmdf, uint32_t Timeout); +HAL_StatusTypeDef HAL_MDF_CkabStart_IT(MDF_HandleTypeDef *hmdf); +HAL_StatusTypeDef HAL_MDF_CkabStop_IT(MDF_HandleTypeDef *hmdf); +/** + * @} + */ + +/* Generic functions *********************************************************/ +/** @addtogroup MDF_Exported_Functions_Group4 + * @{ + */ +void HAL_MDF_IRQHandler(MDF_HandleTypeDef *hmdf); +void HAL_MDF_ErrorCallback(MDF_HandleTypeDef *hmdf); +HAL_MDF_StateTypeDef HAL_MDF_GetState(const MDF_HandleTypeDef *hmdf); +uint32_t HAL_MDF_GetError(const MDF_HandleTypeDef *hmdf); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MDF_Private_Macros MDF Private Macros + * @{ + */ +#define IS_MDF_FILTER_BITSTREAM(PARAM) (((PARAM) == MDF_BITSTREAM0_RISING) || \ + ((PARAM) == MDF_BITSTREAM0_FALLING)) + +#define IS_MDF_PROC_CLOCK_DIVIDER(PARAM) ((1U <= (PARAM)) && ((PARAM) <= 128U)) + +#define IS_MDF_OUTPUT_CLOCK_PINS(PARAM) (((PARAM) == MDF_OUTPUT_CLOCK_0) || \ + ((PARAM) == MDF_OUTPUT_CLOCK_1) || \ + ((PARAM) == MDF_OUTPUT_CLOCK_ALL)) + +#define IS_MDF_OUTPUT_CLOCK_DIVIDER(PARAM) ((1U <= (PARAM)) && ((PARAM) <= 16U)) + +#define IS_MDF_OUTPUT_CLOCK_TRIGGER_SOURCE(PARAM) (((PARAM) == MDF_CLOCK_TRIG_TRGO) || \ + ((PARAM) == MDF_CLOCK_TRIG_EXTI15)) + +#define IS_MDF_OUTPUT_CLOCK_TRIGGER_EDGE(PARAM) (((PARAM) == MDF_CLOCK_TRIG_RISING_EDGE) || \ + ((PARAM) == MDF_CLOCK_TRIG_FALLING_EDGE)) + +#define IS_MDF_SITF_MODE(PARAM) (((PARAM) == MDF_SITF_LF_MASTER_SPI_MODE) || \ + ((PARAM) == MDF_SITF_NORMAL_SPI_MODE) || \ + ((PARAM) == MDF_SITF_MANCHESTER_FALLING_MODE) || \ + ((PARAM) == MDF_SITF_MANCHESTER_RISING_MODE)) + +#define IS_MDF_SITF_CLOCK_SOURCE(PARAM) (((PARAM) == MDF_SITF_CCK0_SOURCE) || \ + ((PARAM) == MDF_SITF_CCK1_SOURCE)) + +#define IS_MDF_SITF_THRESHOLD(PARAM) ((4U <= (PARAM)) && ((PARAM) <= 31U)) + +#define IS_MDF_CIC_MODE(PARAM) (((PARAM) == MDF_ONE_FILTER_SINC4) || \ + ((PARAM) == MDF_ONE_FILTER_SINC5)) + +#define IS_MDF_ACQUISITION_MODE(PARAM) (((PARAM) == MDF_MODE_ASYNC_CONT) || \ + ((PARAM) == MDF_MODE_ASYNC_SINGLE) || \ + ((PARAM) == MDF_MODE_SYNC_CONT) || \ + ((PARAM) == MDF_MODE_SYNC_SINGLE) || \ + ((PARAM) == MDF_MODE_WINDOW_CONT)) + +#define IS_MDF_DISCARD_SAMPLES(PARAM) ((PARAM) <= 255U) + +#define IS_MDF_FIFO_THRESHOLD(PARAM) (((PARAM) == MDF_FIFO_THRESHOLD_NOT_EMPTY) || \ + ((PARAM) == MDF_FIFO_THRESHOLD_HALF_FULL)) + +#define IS_MDF_TRIGGER_SOURCE(PARAM) (((PARAM) == MDF_FILTER_TRIG_TRGO) || \ + ((PARAM) == MDF_FILTER_TRIG_EXTI15)) + +#define IS_MDF_TRIGGER_EDGE(PARAM) (((PARAM) == MDF_FILTER_TRIG_RISING_EDGE) || \ + ((PARAM) == MDF_FILTER_TRIG_FALLING_EDGE)) + +#define IS_MDF_DATA_SOURCE(PARAM) (((PARAM) == MDF_DATA_SOURCE_BSMX) || \ + ((PARAM) == MDF_DATA_SOURCE_ADCITF1) || \ + ((PARAM) == MDF_DATA_SOURCE_ADCITF2)) + +#define IS_MDF_DECIMATION_RATIO(PARAM) ((2U <= (PARAM)) && ((PARAM) <= 512U)) + +#define IS_MDF_GAIN(PARAM) ((-16 <= (PARAM)) && ((PARAM) <= 24)) + +#define IS_MDF_DELAY(PARAM) ((PARAM) <= 127U) + +#define IS_MDF_RSF_DECIMATION_RATIO(PARAM) (((PARAM) == MDF_RSF_DECIMATION_RATIO_4) || \ + ((PARAM) == MDF_RSF_DECIMATION_RATIO_1)) + +#define IS_MDF_HPF_CUTOFF_FREQ(PARAM) (((PARAM) == MDF_HPF_CUTOFF_0_000625FPCM) || \ + ((PARAM) == MDF_HPF_CUTOFF_0_00125FPCM) || \ + ((PARAM) == MDF_HPF_CUTOFF_0_0025FPCM) || \ + ((PARAM) == MDF_HPF_CUTOFF_0_0095FPCM)) + +#define IS_MDF_SAD_MODE(PARAM) (((PARAM) == MDF_SAD_VOICE_ACTIVITY_DETECTOR) || \ + ((PARAM) == MDF_SAD_SOUND_DETECTOR) || \ + ((PARAM) == MDF_SAD_AMBIENT_NOISE_DETECTOR)) + +#define IS_MDF_SAD_FRAME_SIZE(PARAM) (((PARAM) == MDF_SAD_8_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_16_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_32_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_64_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_128_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_256_PCM_SAMPLES) || \ + ((PARAM) == MDF_SAD_512_PCM_SAMPLES)) + +#define IS_MDF_SAD_SOUND_TRIGGER(PARAM) (((PARAM) == MDF_SAD_ENTER_DETECT) || \ + ((PARAM) == MDF_SAD_ENTER_EXIT_DETECT)) + +#define IS_MDF_SAD_DATA_MEMORY_TRANSFER(PARAM) (((PARAM) == MDF_SAD_NO_MEMORY_TRANSFER) || \ + ((PARAM) == MDF_SAD_MEMORY_TRANSFER_IN_DETECT) || \ + ((PARAM) == MDF_SAD_MEMORY_TRANSFER_ALWAYS)) + +#define IS_MDF_SAD_MIN_NOISE_LEVEL(PARAM) ((PARAM) <= 8191U) + +#define IS_MDF_SAD_HANGOVER_WINDOW(PARAM) (((PARAM) == MDF_SAD_HANGOVER_4_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_8_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_16_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_32_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_64_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_128_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_256_FRAMES) || \ + ((PARAM) == MDF_SAD_HANGOVER_512_FRAMES)) + +#define IS_MDF_SAD_LEARNING_FRAMES(PARAM) (((PARAM) == MDF_SAD_LEARNING_2_FRAMES) || \ + ((PARAM) == MDF_SAD_LEARNING_4_FRAMES) || \ + ((PARAM) == MDF_SAD_LEARNING_8_FRAMES) || \ + ((PARAM) == MDF_SAD_LEARNING_16_FRAMES) || \ + ((PARAM) == MDF_SAD_LEARNING_32_FRAMES)) + +#define IS_MDF_SAD_AMBIENT_NOISE_SLOPE(PARAM) ((PARAM) <= 7U) + +#define IS_MDF_SAD_SIGNAL_NOISE_THRESHOLD(PARAM) (((PARAM) == MDF_SAD_SIGNAL_NOISE_3_5DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_6DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_9_5DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_12DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_15_6DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_18DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_21_6DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_24_1DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_27_6DB) || \ + ((PARAM) == MDF_SAD_SIGNAL_NOISE_30_1DB)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_MDF_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdios.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdios.h new file mode 100644 index 000000000..fdcbcd54e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mdios.h @@ -0,0 +1,576 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mdios.h + * @author MCD Application Team + * @brief Header file of MDIOS HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_MDIOS_H +#define STM32H7RSxx_HAL_MDIOS_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (MDIOS) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup MDIOS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Types MDIOS Exported Types + * @{ + */ + +/** @defgroup MDIOS_Exported_Types_Group1 MDIOS State structures definition + * @{ + */ + +typedef enum +{ + HAL_MDIOS_STATE_RESET = 0x00U, /*!< Peripheral not yet Initialized or disabled */ + HAL_MDIOS_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_MDIOS_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_MDIOS_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_MDIOS_StateTypeDef; + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Types_Group2 MDIOS Init Structure definition + * @{ + */ + +typedef struct +{ + uint32_t PortAddress; /*!< Specifies the MDIOS port address. + This parameter can be a value from 0 to 31 */ + uint32_t PreambleCheck; /*!< Specifies whether the preamble check is enabled or disabled. + This parameter can be a value of @ref MDIOS_Preamble_Check */ +} MDIOS_InitTypeDef; + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Types_Group4 MDIOS handle Structure definition + * @{ + */ + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +typedef struct __MDIOS_HandleTypeDef +#else +typedef struct +#endif +{ + MDIOS_TypeDef *Instance; /*!< Register base address */ + + MDIOS_InitTypeDef Init; /*!< MDIOS Init Structure */ + + __IO HAL_MDIOS_StateTypeDef State; /*!< MDIOS communication state + This parameter can be a value of of @ref HAL_MDIOS_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< Holds the global Error code of the MDIOS HAL status machine + This parameter can be a value of of @ref MDIOS_Error_Code */ + + HAL_LockTypeDef Lock; /*!< MDIOS Lock */ + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + + void (* WriteCpltCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Write Complete Callback */ + void (* ReadCpltCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Read Complete Callback */ + void (* ErrorCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Error Callback */ + void (* WakeUpCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Wake UP Callback */ + + void (* MspInitCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Msp Init callback */ + void (* MspDeInitCallback)(struct __MDIOS_HandleTypeDef *hmdios); /*!< MDIOS Msp DeInit callback */ + +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ +} MDIOS_HandleTypeDef; + +/** + * @} + */ + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +/** + * @brief HAL MDIOS Callback ID enumeration definition + */ +typedef enum +{ + HAL_MDIOS_MSPINIT_CB_ID = 0x00U, /*!< MDIOS MspInit callback ID */ + HAL_MDIOS_MSPDEINIT_CB_ID = 0x01U, /*!< MDIOS MspDeInit callback ID */ + + HAL_MDIOS_WRITE_COMPLETE_CB_ID = 0x02U, /*!< MDIOS Write Complete Callback ID */ + HAL_MDIOS_READ_COMPLETE_CB_ID = 0x03U, /*!< MDIOS Read Complete Callback ID */ + HAL_MDIOS_ERROR_CB_ID = 0x04U, /*!< MDIOS Error Callback ID */ + HAL_MDIOS_WAKEUP_CB_ID = 0x05U /*!< MDIOS Wake UP Callback ID */ +} HAL_MDIOS_CallbackIDTypeDef; + +/** + * @brief HAL MDIOS Callback pointer definition + */ +typedef void (*pMDIOS_CallbackTypeDef)(MDIOS_HandleTypeDef *hmdios); /*!< pointer to an MDIOS callback function */ + +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Constants MDIOS Exported Constants + * @{ + */ + +/** @defgroup MDIOS_Preamble_Check MDIOS Preamble Check + * @{ + */ +#define MDIOS_PREAMBLE_CHECK_ENABLE ((uint32_t)0x00000000U) +#define MDIOS_PREAMBLE_CHECK_DISABLE MDIOS_CR_DPC +/** + * @} + */ + +/** @defgroup MDIOS_Input_Output_Registers_Definitions MDIOS Input Output Registers Definitions + * @{ + */ +#define MDIOS_REG0 ((uint32_t)0x00000000U) +#define MDIOS_REG1 ((uint32_t)0x00000001U) +#define MDIOS_REG2 ((uint32_t)0x00000002U) +#define MDIOS_REG3 ((uint32_t)0x00000003U) +#define MDIOS_REG4 ((uint32_t)0x00000004U) +#define MDIOS_REG5 ((uint32_t)0x00000005U) +#define MDIOS_REG6 ((uint32_t)0x00000006U) +#define MDIOS_REG7 ((uint32_t)0x00000007U) +#define MDIOS_REG8 ((uint32_t)0x00000008U) +#define MDIOS_REG9 ((uint32_t)0x00000009U) +#define MDIOS_REG10 ((uint32_t)0x0000000AU) +#define MDIOS_REG11 ((uint32_t)0x0000000BU) +#define MDIOS_REG12 ((uint32_t)0x0000000CU) +#define MDIOS_REG13 ((uint32_t)0x0000000DU) +#define MDIOS_REG14 ((uint32_t)0x0000000EU) +#define MDIOS_REG15 ((uint32_t)0x0000000FU) +#define MDIOS_REG16 ((uint32_t)0x00000010U) +#define MDIOS_REG17 ((uint32_t)0x00000011U) +#define MDIOS_REG18 ((uint32_t)0x00000012U) +#define MDIOS_REG19 ((uint32_t)0x00000013U) +#define MDIOS_REG20 ((uint32_t)0x00000014U) +#define MDIOS_REG21 ((uint32_t)0x00000015U) +#define MDIOS_REG22 ((uint32_t)0x00000016U) +#define MDIOS_REG23 ((uint32_t)0x00000017U) +#define MDIOS_REG24 ((uint32_t)0x00000018U) +#define MDIOS_REG25 ((uint32_t)0x00000019U) +#define MDIOS_REG26 ((uint32_t)0x0000001AU) +#define MDIOS_REG27 ((uint32_t)0x0000001BU) +#define MDIOS_REG28 ((uint32_t)0x0000001CU) +#define MDIOS_REG29 ((uint32_t)0x0000001DU) +#define MDIOS_REG30 ((uint32_t)0x0000001EU) +#define MDIOS_REG31 ((uint32_t)0x0000001FU) +/** + * @} + */ + +/** @defgroup MDIOS_Registers_Flags MDIOS Registers Flags + * @{ + */ +#define MDIOS_REG0_FLAG ((uint32_t)0x00000001U) +#define MDIOS_REG1_FLAG ((uint32_t)0x00000002U) +#define MDIOS_REG2_FLAG ((uint32_t)0x00000004U) +#define MDIOS_REG3_FLAG ((uint32_t)0x00000008U) +#define MDIOS_REG4_FLAG ((uint32_t)0x00000010U) +#define MDIOS_REG5_FLAG ((uint32_t)0x00000020U) +#define MDIOS_REG6_FLAG ((uint32_t)0x00000040U) +#define MDIOS_REG7_FLAG ((uint32_t)0x00000080U) +#define MDIOS_REG8_FLAG ((uint32_t)0x00000100U) +#define MDIOS_REG9_FLAG ((uint32_t)0x00000200U) +#define MDIOS_REG10_FLAG ((uint32_t)0x00000400U) +#define MDIOS_REG11_FLAG ((uint32_t)0x00000800U) +#define MDIOS_REG12_FLAG ((uint32_t)0x00001000U) +#define MDIOS_REG13_FLAG ((uint32_t)0x00002000U) +#define MDIOS_REG14_FLAG ((uint32_t)0x00004000U) +#define MDIOS_REG15_FLAG ((uint32_t)0x00008000U) +#define MDIOS_REG16_FLAG ((uint32_t)0x00010000U) +#define MDIOS_REG17_FLAG ((uint32_t)0x00020000U) +#define MDIOS_REG18_FLAG ((uint32_t)0x00040000U) +#define MDIOS_REG19_FLAG ((uint32_t)0x00080000U) +#define MDIOS_REG20_FLAG ((uint32_t)0x00100000U) +#define MDIOS_REG21_FLAG ((uint32_t)0x00200000U) +#define MDIOS_REG22_FLAG ((uint32_t)0x00400000U) +#define MDIOS_REG23_FLAG ((uint32_t)0x00800000U) +#define MDIOS_REG24_FLAG ((uint32_t)0x01000000U) +#define MDIOS_REG25_FLAG ((uint32_t)0x02000000U) +#define MDIOS_REG26_FLAG ((uint32_t)0x04000000U) +#define MDIOS_REG27_FLAG ((uint32_t)0x08000000U) +#define MDIOS_REG28_FLAG ((uint32_t)0x10000000U) +#define MDIOS_REG29_FLAG ((uint32_t)0x20000000U) +#define MDIOS_REG30_FLAG ((uint32_t)0x40000000U) +#define MDIOS_REG31_FLAG ((uint32_t)0x80000000U) +#define MDIOS_ALLREG_FLAG ((uint32_t)0xFFFFFFFFU) +/** + * @} + */ + +/** @defgroup MDIOS_Interrupt_sources Interrupt Sources + * @{ + */ +#define MDIOS_IT_WRITE MDIOS_CR_WRIE +#define MDIOS_IT_READ MDIOS_CR_RDIE +#define MDIOS_IT_ERROR MDIOS_CR_EIE +/** + * @} + */ + +/** @defgroup MDIOS_Interrupt_Flags MDIOS Interrupt Flags + * @{ + */ +#define MDIOS_TURNAROUND_ERROR_FLAG MDIOS_SR_TERF +#define MDIOS_START_ERROR_FLAG MDIOS_SR_SERF +#define MDIOS_PREAMBLE_ERROR_FLAG MDIOS_SR_PERF +/** + * @} + */ + +/** @defgroup MDIOS_Error_Code MDIOS Error Code + * @{ + */ +#define HAL_MDIOS_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_MDIOS_ERROR_PARAM ((uint32_t)0x00000001U) /*!< Busy error */ +#define HAL_MDIOS_ERROR_BUSY ((uint32_t)0x00000002U) /*!< Parameter error */ +#define HAL_MDIOS_ERROR_TIMEOUT ((uint32_t)0x00000004U) /*!< Timeout error */ +#define HAL_MDIOS_ERROR_DATA ((uint32_t)0x00000010U) /*!< Data transfer error */ +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +#define HAL_MDIOS_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup MDIOS_Wakeup_Line MDIOS Wakeup Line + * @{ + */ +#define MDIOS_WAKEUP_EXTI_LINE ((uint32_t)0x00000400) /* !< 42 - 32 = 10 */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Macros MDIOS Exported Macros + * @{ + */ + +/** @brief Reset MDIOS handle state + * @param __HANDLE__: MDIOS handle. + * @retval None + */ +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_MDIOS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MDIOS_STATE_RESET) +#endif /*USE_HAL_MDIOS_REGISTER_CALLBACKS */ + +/** + * @brief Enable/Disable the MDIOS peripheral. + * @param __HANDLE__: specifies the MDIOS handle. + * @retval None + */ +#define __HAL_MDIOS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= MDIOS_CR_EN) +#define __HAL_MDIOS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~MDIOS_CR_EN) + + +/** + * @brief Enable the MDIOS device interrupt. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval None + */ +#define __HAL_MDIOS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the MDIOS device interrupt. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval None + */ +#define __HAL_MDIOS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** @brief Set MDIOS slave get write register flag + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__: specifies the write register flag + * @retval The state of write flag + */ +#define __HAL_MDIOS_GET_WRITE_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WRFR & (__FLAG__)) + +/** @brief MDIOS slave get read register flag + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__: specifies the read register flag + * @retval The state of read flag + */ +#define __HAL_MDIOS_GET_READ_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->RDFR & (__FLAG__)) + +/** @brief MDIOS slave get interrupt + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__ : specifies the Error flag. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt + * @arg MDIOS_START_ERROR_FLAG: Register read interrupt + * @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt + * @retval The state of the error flag + */ +#define __HAL_MDIOS_GET_ERROR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR & (__FLAG__)) + +/** @brief MDIOS slave clear interrupt + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__ : specifies the Error flag. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt + * @arg MDIOS_START_ERROR_FLAG: Register read interrupt + * @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt + * @retval none + */ +#define __HAL_MDIOS_CLEAR_ERROR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR) |= (__FLAG__) + +/** + * @brief Checks whether the specified MDIOS interrupt is set or not. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval The state of the interrupt source + */ +#define __HAL_MDIOS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) + +/** + * @brief Enable the MDIOS WAKEUP Exti Line. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be enabled. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__) (EXTI->IMR2 |= (__EXTI_LINE__)) + +/** + * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval EXTI MDIOS WAKEUP Line Status. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR2 & (__EXTI_LINE__)) + +/** + * @brief Clear the MDIOS WAKEUP Exti flag. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR2 = (__EXTI_LINE__)) + +/** + * @brief enable rising edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR2 &= ~(__EXTI_LINE__)); \ + (EXTI->RTSR2 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 &= ~(__EXTI_LINE__));\ + (EXTI->FTSR2 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 |= (__EXTI_LINE__));\ + (EXTI->FTSR2 |= (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled. + * This parameter can be: + * @arg MDIOS_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER2 |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions + * @{ + */ + +/** @addtogroup MDIOS_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios); +HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_MDIOS_RegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID, + pMDIOS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_MDIOS_UnRegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup MDIOS_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t Data); +HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t *pData); + +uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios); +uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios); +HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum); +HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum); + +HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios); +/** + * @} + */ + +/** @addtogroup MDIOS_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios); +HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Types MDIOS Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Variables MDIOS Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Constants MDIOS Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Macros MDIOS Private Macros + * @{ + */ + +#define IS_MDIOS_PORTADDRESS(__ADDR__) ((__ADDR__) < 32U) + +#define IS_MDIOS_REGISTER(__REGISTER__) ((__REGISTER__) < 32U) + +#define IS_MDIOS_PREAMBLECHECK(__PREAMBLECHECK__) (((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_ENABLE) || \ + ((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_DISABLE)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Functions MDIOS Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* MDIOS */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_MDIOS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc.h new file mode 100644 index 000000000..3e120d4c9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc.h @@ -0,0 +1,873 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mmc.h + * @author MCD Application Team + * @brief Header file of MMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_MMC_H +#define STM32H7RSxx_HAL_MMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_sdmmc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (SDMMC1) || defined (SDMMC2) + +/** @addtogroup MMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MMC_Exported_Types MMC Exported Types + * @{ + */ + +/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure + * @{ + */ +typedef enum +{ + HAL_MMC_STATE_RESET = ((uint32_t)0x00000000U), /*!< MMC not yet initialized or disabled */ + HAL_MMC_STATE_READY = ((uint32_t)0x00000001U), /*!< MMC initialized and ready for use */ + HAL_MMC_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< MMC Timeout state */ + HAL_MMC_STATE_BUSY = ((uint32_t)0x00000003U), /*!< MMC process ongoing */ + HAL_MMC_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< MMC Programming State */ + HAL_MMC_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< MMC Receinving State */ + HAL_MMC_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< MMC Transfer State */ + HAL_MMC_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< MMC is in error state */ +} HAL_MMC_StateTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure + * @{ + */ +typedef uint32_t HAL_MMC_CardStateTypeDef; + +#define HAL_MMC_CARD_IDLE 0x00000000U /*!< Card is in idle state (can't be checked by CMD13) */ +#define HAL_MMC_CARD_READY 0x00000001U /*!< Card state is ready (can't be checked by CMD13) */ +#define HAL_MMC_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state (can't be checked by CMD13) */ +#define HAL_MMC_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ +#define HAL_MMC_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ +#define HAL_MMC_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ +#define HAL_MMC_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ +#define HAL_MMC_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ +#define HAL_MMC_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ +#define HAL_MMC_CARD_BUSTEST 0x00000009U /*!< Card is in bus test state */ +#define HAL_MMC_CARD_SLEEP 0x0000000AU /*!< Card is in sleep state (can't be checked by CMD13) */ +#define HAL_MMC_CARD_ERROR 0x000000FFU /*!< Card response Error (can't be checked by CMD13) */ +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition + * @{ + */ +#define MMC_InitTypeDef SDMMC_InitTypeDef +#define MMC_TypeDef SDMMC_TypeDef + +/** + * @brief MMC Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + +} HAL_MMC_CardInfoTypeDef; + +/** + * @brief MMC handle Structure definition + */ +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +typedef struct __MMC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ +{ + MMC_TypeDef *Instance; /*!< MMC registers base address */ + + MMC_InitTypeDef Init; /*!< MMC required parameters */ + + HAL_LockTypeDef Lock; /*!< MMC locking object */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< MMC Tx Transfer size */ + + uint8_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< MMC Rx Transfer size */ + + __IO uint32_t Context; /*!< MMC transfer context */ + + __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ + + __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ + + __IO uint16_t RPMBErrorCode; /*!< MMC RPMB Area Error codes */ + + HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ + + uint32_t CSD[4U]; /*!< MMC card specific data table */ + + uint32_t CID[4U]; /*!< MMC card identification number table */ + + uint32_t Ext_CSD[128]; + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* RxCpltCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* ErrorCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* AbortCpltCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* Read_DMALnkLstBufCpltCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* Write_DMALnkLstBufCpltCallback)(struct __MMC_HandleTypeDef *hmmc); + + void (* MspInitCallback)(struct __MMC_HandleTypeDef *hmmc); + void (* MspDeInitCallback)(struct __MMC_HandleTypeDef *hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ +} MMC_HandleTypeDef; + + +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGroup; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ + +} HAL_MMC_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +} HAL_MMC_CardCIDTypeDef; +/** + * @} + */ + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +/** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_MMC_TX_CPLT_CB_ID = 0x00U, /*!< MMC Tx Complete Callback ID */ + HAL_MMC_RX_CPLT_CB_ID = 0x01U, /*!< MMC Rx Complete Callback ID */ + HAL_MMC_ERROR_CB_ID = 0x02U, /*!< MMC Error Callback ID */ + HAL_MMC_ABORT_CB_ID = 0x03U, /*!< MMC Abort Callback ID */ + HAL_MMC_READ_DMA_LNKLST_BUF_CPLT_CB_ID = 0x04U, /*!< MMC DMA Rx Linked List Node buffer Callback ID */ + HAL_MMC_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID = 0x05U, /*!< MMC DMA Tx Linked List Node buffer Callback ID */ + + HAL_MMC_MSP_INIT_CB_ID = 0x10U, /*!< MMC MspInit Callback ID */ + HAL_MMC_MSP_DEINIT_CB_ID = 0x11U /*!< MMC MspDeInit Callback ID */ +} HAL_MMC_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition + * @{ + */ +typedef void (*pMMC_CallbackTypeDef)(MMC_HandleTypeDef *hmmc); +/** + * @} + */ +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MMC_Exported_Constants Exported Constants + * @{ + */ + +#define MMC_BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ + +/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition + * @{ + */ +#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the */ +/*!< number of transferred bytes does not match the block length */ +#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock */ +/*!< command or if there was an attempt to access a locked card */ +#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out */ +/*!< of erase sequence command was received */ +#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ +/*!< response results after operating with RPMB partition */ +#define HAL_MMC_ERROR_RPMB_OPERATION_OK 0x0000U /*!< Operation OK */ +#define HAL_MMC_ERROR_RPMB_GENERAL_FAILURE 0x0001U /*!< General failure */ +#define HAL_MMC_ERROR_RPMB_AUTHENTICATION_FAILURE 0x0002U /*!< Authentication failure */ +#define HAL_MMC_ERROR_RPMB_COUNTER_FAILURE 0x0003U /*!< Counter failure */ +#define HAL_MMC_ERROR_RPMB_ADDRESS_FAILURE 0x0004U /*!< Address failure */ +#define HAL_MMC_ERROR_RPMB_WRITE_FAILURE 0x0005U /*!< Write failure */ +#define HAL_MMC_ERROR_RPMB_READ_FAILURE 0x0006U /*!< Read failure */ +#define HAL_MMC_ERROR_RPMB_KEY_NOT_YET_PROG 0x0007U /*!< Authentication Key not yet programmed */ +#define HAL_MMC_ERROR_RPMB_COUNTER_EXPIRED 0x0080U /*!< Write Counter has expired i.e. reached its max value */ + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +#define HAL_MMC_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration + * @{ + */ +#define MMC_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define MMC_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define MMC_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define MMC_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define MMC_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define MMC_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode + * @{ + */ +/** + * @brief + */ +#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< High voltage in byte mode */ +#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< Dual voltage in byte mode */ +#define MMC_LOW_VOLTAGE_RANGE 0x80000080U /*!< Low voltage in byte mode */ +#define EMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< High voltage in sector mode */ +#define EMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< Dual voltage in sector mode */ +#define EMMC_LOW_VOLTAGE_RANGE 0xC0000080U /*!< Low voltage in sector mode */ +#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards + * @{ + */ +#define MMC_LOW_CAPACITY_CARD ((uint32_t)0x00000000U) /*!< MMC Card Capacity <=2Gbytes */ +#define MMC_HIGH_CAPACITY_CARD ((uint32_t)0x00000001U) /*!< MMC Card Capacity >2Gbytes and <2Tbytes */ + +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group5 MMC Erase Type + * @{ + */ +#define HAL_MMC_ERASE 0x00000000U /*!< Erase the erase groups identified by CMD35 & 36 */ +#define HAL_MMC_TRIM 0x00000001U /*!< Erase the write blocks identified by CMD35 & 36 */ +#define HAL_MMC_DISCARD 0x00000003U /*!< Discard the write blocks identified by CMD35 & 36 */ +#define HAL_MMC_SECURE_ERASE 0x80000000U /*!< Perform a secure purge according SRT on the erase groups identified by CMD35 & 36 */ +#define HAL_MMC_SECURE_TRIM_STEP1 0x80000001U /*!< Mark the write blocks identified by CMD35 & 36 for secure erase */ +#define HAL_MMC_SECURE_TRIM_STEP2 0x80008000U /*!< Perform a secure purge according SRT on the write blocks previously identified */ + +#define IS_MMC_ERASE_TYPE(TYPE) (((TYPE) == HAL_MMC_ERASE) || \ + ((TYPE) == HAL_MMC_TRIM) || \ + ((TYPE) == HAL_MMC_DISCARD) || \ + ((TYPE) == HAL_MMC_SECURE_ERASE) || \ + ((TYPE) == HAL_MMC_SECURE_TRIM_STEP1) || \ + ((TYPE) == HAL_MMC_SECURE_TRIM_STEP2)) +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group6 MMC Secure Removal Type + * @{ + */ +#define HAL_MMC_SRT_ERASE 0x00000001U /*!< Information removed by an erase */ +#define HAL_MMC_SRT_WRITE_CHAR_ERASE 0x00000002U /*!< Information removed by an overwriting with a character followed by an erase */ +#define HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM 0x00000004U /*!< Information removed by an overwriting with a character, its complement then a random character */ +#define HAL_MMC_SRT_VENDOR_DEFINED 0x00000008U /*!< Information removed using a vendor defined */ + + +#define IS_MMC_SRT_TYPE(TYPE) (((TYPE) == HAL_MMC_SRT_ERASE) || \ + ((TYPE) == HAL_MMC_SRT_WRITE_CHAR_ERASE) || \ + ((TYPE) == HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM) || \ + ((TYPE) == HAL_MMC_SRT_VENDOR_DEFINED)) +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group7 MMC Partitions types + * @{ + */ +typedef uint32_t HAL_MMC_PartitionTypeDef; + +#define HAL_MMC_USER_AREA_PARTITION 0x00000000U /*!< User area partition */ +#define HAL_MMC_BOOT_PARTITION1 0x00000100U /*!< Boot partition 1 */ +#define HAL_MMC_BOOT_PARTITION2 0x00000200U /*!< Boot partition 2 */ +#define HAL_MMC_RPMB_PARTITION 0x00000300U /*!< RPMB partition */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup MMC_Exported_macros MMC Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +/** @brief Reset MMC handle state. + * @param __HANDLE__ MMC Handle. + * @retval None + */ +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_MMC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MMC_STATE_RESET) +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + +/** + * @brief Enable the MMC device interrupt. + * @param __HANDLE__ MMC Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the MMC device interrupt. + * @param __HANDLE__ MMC Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified MMC flag is set or not. + * @param __HANDLE__ MMC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of MMC FLAG (SET or RESET). + */ +#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the MMC's pending flags. + * @param __HANDLE__ MMC Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified MMC interrupt has occurred or not. + * @param __HANDLE__ MMC Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of MMC IT (SET or RESET). + */ +#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the MMC's interrupt pending bits. + * @param __HANDLE__ MMC Handle. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Include MMC HAL Extension module */ +#include "stm32h7rsxx_hal_mmc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MMC_Exported_Functions MMC Exported Functions + * @{ + */ + +/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_DeInit(MMC_HandleTypeDef *hmmc); +void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); +void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); + +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, + uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); + +void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); + +/* Callback in non blocking modes (DMA) */ +void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +/* MMC callback registering/unregistering */ +HAL_StatusTypeDef HAL_MMC_RegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, + pMMC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); +HAL_StatusTypeDef HAL_MMC_ConfigSpeedBusOperation(MMC_HandleTypeDef *hmmc, uint32_t SpeedMode); +HAL_StatusTypeDef HAL_MMC_SwitchPartition(MMC_HandleTypeDef *hmmc, HAL_MMC_PartitionTypeDef Partition); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions + * @{ + */ +HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); +HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_MMC_StateTypeDef HAL_MMC_GetState(const MMC_HandleTypeDef *hmmc); +uint32_t HAL_MMC_GetError(const MMC_HandleTypeDef *hmmc); +uint32_t HAL_MMC_GetRPMBError(const MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group6 Peripheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group7 Peripheral Erase management + * @{ + */ +HAL_StatusTypeDef HAL_MMC_EraseSequence(MMC_HandleTypeDef *hmmc, uint32_t EraseType, uint32_t BlockStartAdd, + uint32_t BlockEndAdd); +HAL_StatusTypeDef HAL_MMC_Sanitize(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_ConfigSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t SRTMode); +HAL_StatusTypeDef HAL_MMC_GetSupportedSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t *SupportedSRT); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group8 Peripheral Sleep management + * @{ + */ +HAL_StatusTypeDef HAL_MMC_SleepDevice(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_AwakeDevice(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group9 Replay Protected Memory Block management + * @{ + */ +HAL_StatusTypeDef HAL_MMC_RPMB_ProgramAuthenticationKey(MMC_HandleTypeDef *hmmc, const uint8_t *pKey, uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_RPMB_ProgramAuthenticationKey_IT(MMC_HandleTypeDef *hmmc, const uint8_t *pKey, + uint32_t Timeout); +uint32_t HAL_MMC_RPMB_GetWriteCounter(MMC_HandleTypeDef *hmmc, uint8_t *pNonce, uint32_t Timeout); +uint32_t HAL_MMC_RPMB_GetWriteCounter_IT(MMC_HandleTypeDef *hmmc, uint8_t *pNonce); +HAL_StatusTypeDef HAL_MMC_RPMB_WriteBlocks(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pMAC, uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_RPMB_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pMAC); +HAL_StatusTypeDef HAL_MMC_RPMB_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pNonce, uint8_t *pMAC, + uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_RPMB_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pNonce, uint8_t *pMAC); + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MMC_Private_Types MMC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup MMC_Private_Defines MMC Private Defines + * @{ + */ +#define MMC_EXT_CSD_DATA_SEC_SIZE_INDEX 61 +#define MMC_EXT_CSD_DATA_SEC_SIZE_POS 8 +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Variables MMC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Constants MMC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MMC_Private_Macros MMC Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Functions MMC Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_MMC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc_ex.h new file mode 100644 index 000000000..b27c17acc --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_mmc_ex.h @@ -0,0 +1,122 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mmc_ex.h + * @author MCD Application Team + * @brief Header file of SD HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_MMC_EX_H +#define STM32H7RSxx_HAL_MMC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (SDMMC1) || defined (SDMMC2) +/** @addtogroup MMCEx + * @brief SD HAL extended module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MMCEx_Exported_Types MMCEx Exported Types + * @{ + */ + +/** @defgroup MMCEx_Exported_Types_Group1 Linked List Wrapper + * @{ + */ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* -----------------Linked List Wrapper --------------------------------------*/ + +#define MMC_DMALinkNodeTypeDef SDMMC_DMALinkNodeTypeDef +#define MMC_DMALinkNodeConfTypeDef SDMMC_DMALinkNodeConfTypeDef +#define MMC_DMALinkedListTypeDef SDMMC_DMALinkedListTypeDef +/* ----------------- Linked Aliases ------------------------------------------*/ +#define HAL_MMCx_DMALinkedList_WriteCpltCallback HAL_MMC_TxCpltCallback +#define HAL_MMCx_DMALinkedList_ReadCpltCallback HAL_MMC_RxCpltCallback +/** + * @} + */ + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MMCEx_Exported_Functions MMCEx Exported Functions + * @{ + */ + +/** @defgroup MMCEx_Exported_Functions_Group1 MultiBuffer functions + * @{ + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_ReadBlocks(MMC_HandleTypeDef *hmmc, SDMMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_WriteBlocks(MMC_HandleTypeDef *hmmc, SDMMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks); + +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_BuildNode(MMC_DMALinkNodeTypeDef *pNode, + MMC_DMALinkNodeConfTypeDef *pNodeConf); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_InsertNode(MMC_DMALinkedListTypeDef *pLinkedList, + MMC_DMALinkNodeTypeDef *pPrevNode, + MMC_DMALinkNodeTypeDef *pNewNode); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_RemoveNode(MMC_DMALinkedListTypeDef *pLinkedList, + MMC_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_LockNode(MMC_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_UnlockNode(MMC_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_EnableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList); +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_DisableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList); + +void HAL_MMCEx_Read_DMALnkLstBufCpltCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMCEx_Write_DMALnkLstBufCpltCallback(MMC_HandleTypeDef *hmmc); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_MMCEx_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nand.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nand.h new file mode 100644 index 000000000..801cd617e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nand.h @@ -0,0 +1,376 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_nand.h + * @author MCD Application Team + * @brief Header file of NAND HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_NAND_H +#define STM32H7RSxx_HAL_NAND_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_fmc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup NAND + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup NAND_Exported_Types NAND Exported Types + * @{ + */ + +/** + * @brief HAL NAND State structures definition + */ +typedef enum +{ + HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ + HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ + HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ + HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ +} HAL_NAND_StateTypeDef; + +/** + * @brief NAND Memory electronic signature Structure definition + */ +typedef struct +{ + /*State = HAL_NAND_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NAND_Exported_Functions NAND Exported Functions + * @{ + */ + +/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); +HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); + +HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); + +void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); +void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* IO operation functions ****************************************************/ +HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress); + +uint32_t HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) +/* NAND callback registering/unregistering */ +HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, + pNAND_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* NAND Control functions ****************************************************/ +HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +/* NAND State functions *******************************************************/ +HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand); +uint32_t HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NAND_Private_Constants NAND Private Constants + * @{ + */ +#define NAND_DEVICE 0x80000000UL +#define NAND_WRITE_TIMEOUT 0x01000000UL + +#define CMD_AREA (1UL<<16U) /* A16 = CLE high */ +#define ADDR_AREA (1UL<<17U) /* A17 = ALE high */ + +#define NAND_CMD_AREA_A ((uint8_t)0x00) +#define NAND_CMD_AREA_B ((uint8_t)0x01) +#define NAND_CMD_AREA_C ((uint8_t)0x50) +#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) + +#define NAND_CMD_WRITE0 ((uint8_t)0x80) +#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) +#define NAND_CMD_ERASE0 ((uint8_t)0x60) +#define NAND_CMD_ERASE1 ((uint8_t)0xD0) +#define NAND_CMD_READID ((uint8_t)0x90) +#define NAND_CMD_STATUS ((uint8_t)0x70) +#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) +#define NAND_CMD_RESET ((uint8_t)0xFF) + +/* NAND memory status */ +#define NAND_VALID_ADDRESS 0x00000100UL +#define NAND_INVALID_ADDRESS 0x00000200UL +#define NAND_TIMEOUT_ERROR 0x00000400UL +#define NAND_BUSY 0x00000000UL +#define NAND_ERROR 0x00000001UL +#define NAND_READY 0x00000040UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NAND_Private_Macros NAND Private Macros + * @{ + */ + +/** + * @brief NAND memory address computation. + * @param __ADDRESS__ NAND memory address. + * @param __HANDLE__ NAND handle. + * @retval NAND Raw address value + */ +#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ + (((__ADDRESS__)->Block + \ + (((__ADDRESS__)->Plane) * \ + ((__HANDLE__)->Config.PlaneSize))) * \ + ((__HANDLE__)->Config.BlockSize))) + +/** + * @brief NAND memory Column address computation. + * @param __HANDLE__ NAND handle. + * @retval NAND Raw address value + */ +#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) + +/** + * @brief NAND memory address cycling. + * @param __ADDRESS__ NAND memory address. + * @retval NAND address cycling value. + */ +#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ +#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ +#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ +#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ + +/** + * @brief NAND memory Columns cycling. + * @param __ADDRESS__ NAND memory address. + * @retval NAND Column address cycling value. + */ +#define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) & 0xFFU) /* 1st Column addressing cycle */ +#define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_NAND_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nor.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nor.h new file mode 100644 index 000000000..5b53c6cc4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_nor.h @@ -0,0 +1,324 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_nor.h + * @author MCD Application Team + * @brief Header file of NOR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_NOR_H +#define STM32H7RSxx_HAL_NOR_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_fmc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup NOR + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup NOR_Exported_Types NOR Exported Types + * @{ + */ + +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */ + HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */ + HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */ + HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */ + HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */ +} HAL_NOR_StateTypeDef; + +/** + * @brief FMC NOR Status typedef + */ +typedef enum +{ + HAL_NOR_STATUS_SUCCESS = 0U, + HAL_NOR_STATUS_ONGOING, + HAL_NOR_STATUS_ERROR, + HAL_NOR_STATUS_TIMEOUT +} HAL_NOR_StatusTypeDef; + +/** + * @brief FMC NOR ID typedef + */ +typedef struct +{ + uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ + + uint16_t Device_Code1; + + uint16_t Device_Code2; + + uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. + These codes can be accessed by performing read operations with specific + control signals and addresses set.They can also be accessed by issuing + an Auto Select command */ +} NOR_IDTypeDef; + +/** + * @brief FMC NOR CFI typedef + */ +typedef struct +{ + /*!< Defines the information stored in the memory's Common flash interface + which contains a description of various electrical and timing parameters, + density information and functions supported by the memory */ + + uint16_t CFI_1; + + uint16_t CFI_2; + + uint16_t CFI_3; + + uint16_t CFI_4; +} NOR_CFITypeDef; + +/** + * @brief NOR handle Structure definition + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +typedef struct __NOR_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ + +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NOR locking object */ + + __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ + + uint32_t CommandSet; /*!< NOR algorithm command set and control */ + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */ + void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */ +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +} NOR_HandleTypeDef; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief HAL NOR Callback ID enumeration definition + */ +typedef enum +{ + HAL_NOR_MSP_INIT_CB_ID = 0x00U, /*!< NOR MspInit Callback ID */ + HAL_NOR_MSP_DEINIT_CB_ID = 0x01U /*!< NOR MspDeInit Callback ID */ +} HAL_NOR_CallbackIDTypeDef; + +/** + * @brief HAL NOR Callback pointer definition + */ +typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup NOR_Exported_Macros NOR Exported Macros + * @{ + */ +/** @brief Reset NOR handle state + * @param __HANDLE__ specifies the NOR handle. + * @retval None + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_NOR_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); + +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); + +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/* NOR callback registering/unregistering */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions + * @{ + */ + +/* NOR Control functions *****************************************************/ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions + * @{ + */ + +/* NOR State functions ********************************************************/ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor); +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Constants NOR Private Constants + * @{ + */ +/* NOR device IDs addresses */ +#define MC_ADDRESS ((uint16_t)0x0000) +#define DEVICE_CODE1_ADDR ((uint16_t)0x0001) +#define DEVICE_CODE2_ADDR ((uint16_t)0x000E) +#define DEVICE_CODE3_ADDR ((uint16_t)0x000F) + +/* NOR CFI IDs addresses */ +#define CFI1_ADDRESS ((uint16_t)0x0061) +#define CFI2_ADDRESS ((uint16_t)0x0062) +#define CFI3_ADDRESS ((uint16_t)0x0063) +#define CFI4_ADDRESS ((uint16_t)0x0064) + +/* NOR operation wait timeout */ +#define NOR_TMEOUT ((uint16_t)0xFFFF) + +/* NOR memory data width */ +#define NOR_MEMORY_8B ((uint8_t)0x00) +#define NOR_MEMORY_16B ((uint8_t)0x01) + +/* NOR memory device read/write start address */ +#define NOR_MEMORY_ADRESS1 (0x60000000U) +#define NOR_MEMORY_ADRESS2 (0x64000000U) +#define NOR_MEMORY_ADRESS3 (0x68000000U) +#define NOR_MEMORY_ADRESS4 (0x6C000000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NOR_Private_Macros NOR Private Macros + * @{ + */ +/** + * @brief NOR memory address shifting. + * @param __NOR_ADDRESS NOR base address + * @param __NOR_MEMORY_WIDTH_ NOR memory width + * @param __ADDRESS__ NOR memory address + * @retval NOR shifted address value + */ +#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \ + ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \ + ((uint32_t)((__NOR_ADDRESS) + (2U * (__ADDRESS__)))): \ + ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))) + +/** + * @brief NOR memory write data to specified address. + * @param __ADDRESS__ NOR memory address + * @param __DATA__ Data to write + * @retval None + */ +#define NOR_WRITE(__ADDRESS__, __DATA__) do{ \ + (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \ + __DSB(); \ + } while(0) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_NOR_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd.h new file mode 100644 index 000000000..c3bab83c0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd.h @@ -0,0 +1,427 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PCD_H +#define STM32H7RSxx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_usb.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + uint32_t FrameNumber; /*!< Store Current Frame number */ + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32h7rsxx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_HIGH USBD_HS_SPEED +#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ + ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ + ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCD_SetTestMode(const PCD_HandleTypeDef *hpcd, uint8_t testmode); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif /* defined USB_OTG_DOEPINT_NAK */ + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NAKM */ + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_STPKTRX */ + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NYETM */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_PCD_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd_ex.h new file mode 100644 index 000000000..d03d88045 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pcd_ex.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PCD_EX_H +#define STM32H7RSxx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); + +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7RSxx_HAL_PCD_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pka.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pka.h new file mode 100644 index 000000000..d6a377c54 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pka.h @@ -0,0 +1,670 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pka.h + * @author MCD Application Team + * @brief Header file of PKA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PKA_H +#define STM32H7RSxx_HAL_PKA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(PKA) && defined(HAL_PKA_MODULE_ENABLED) + +/** @addtogroup PKA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PKA_Exported_Types PKA Exported Types + * @{ + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structures definition + * @{ + */ +typedef enum +{ + HAL_PKA_STATE_RESET = 0x00U, /*!< PKA not yet initialized or disabled */ + HAL_PKA_STATE_READY = 0x01U, /*!< PKA initialized and ready for use */ + HAL_PKA_STATE_BUSY = 0x02U, /*!< PKA internal processing is ongoing */ + HAL_PKA_STATE_ERROR = 0x03U, /*!< PKA error state */ +} +HAL_PKA_StateTypeDef; + +/** + * @} + */ + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +/** @defgroup HAL_callback_id HAL callback ID enumeration + * @{ + */ +typedef enum +{ + HAL_PKA_OPERATION_COMPLETE_CB_ID = 0x00U, /*!< PKA End of operation callback ID */ + HAL_PKA_ERROR_CB_ID = 0x01U, /*!< PKA Error callback ID */ + HAL_PKA_MSPINIT_CB_ID = 0x02U, /*!< PKA Msp Init callback ID */ + HAL_PKA_MSPDEINIT_CB_ID = 0x03U /*!< PKA Msp DeInit callback ID */ +} HAL_PKA_CallbackIDTypeDef; + +/** + * @} + */ + +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + +/** @defgroup PKA_Error_Code_definition PKA Error Code definition + * @brief PKA Error Code definition + * @{ + */ +#define HAL_PKA_ERROR_NONE (0x00000000U) +#define HAL_PKA_ERROR_ADDRERR (0x00000001U) +#define HAL_PKA_ERROR_RAMERR (0x00000002U) +#define HAL_PKA_ERROR_TIMEOUT (0x00000004U) +#define HAL_PKA_ERROR_OPERATION (0x00000008U) +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +#define HAL_PKA_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PKA_handle_Structure_definition PKA handle Structure definition + * @brief PKA handle Structure definition + * @{ + */ +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +typedef struct __PKA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ +{ + PKA_TypeDef *Instance; /*!< Register base address */ + __IO HAL_PKA_StateTypeDef State; /*!< PKA state */ + __IO uint32_t ErrorCode; /*!< PKA Error code */ +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) + void (* OperationCpltCallback)(struct __PKA_HandleTypeDef *hpka); /*!< PKA End of operation callback */ + void (* ErrorCallback)(struct __PKA_HandleTypeDef *hpka); /*!< PKA Error callback */ + void (* MspInitCallback)(struct __PKA_HandleTypeDef *hpka); /*!< PKA Msp Init callback */ + void (* MspDeInitCallback)(struct __PKA_HandleTypeDef *hpka); /*!< PKA Msp DeInit callback */ +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ +} PKA_HandleTypeDef; +/** + * @} + */ + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +/** @defgroup PKA_Callback_definition PKA Callback pointer definition + * @brief PKA Callback pointer definition + * @{ + */ +typedef void (*pPKA_CallbackTypeDef)(PKA_HandleTypeDef *hpka); /*!< Pointer to a PKA callback function */ +/** + * @} + */ +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ +/** @defgroup PKA_Operation PKA operation structure definition + * @brief Input and output data definition + * @{ + */ + +typedef struct +{ + uint32_t scalarMulSize; /*!< Number of element in scalarMul array */ + uint32_t modulusSize; /*!< Number of element in modulus, coefA, pointX and pointY arrays */ + uint32_t coefSign; /*!< Curve coefficient a sign */ + const uint8_t *coefA; /*!< Pointer to curve coefficient |a| (Array of modulusSize elements) */ + const uint8_t *coefB; /*!< pointer to curve coefficient b */ + const uint8_t *modulus; /*!< Pointer to curve modulus value p (Array of modulusSize elements) */ + const uint8_t *pointX; /*!< Pointer to point P coordinate xP (Array of modulusSize elements) */ + const uint8_t *pointY; /*!< Pointer to point P coordinate yP (Array of modulusSize elements) */ + const uint8_t *scalarMul; /*!< Pointer to scalar multiplier k (Array of scalarMulSize elements) */ + const uint8_t *primeOrder; /*!< pointer to order of the curve */ +} PKA_ECCMulInTypeDef; + +typedef struct +{ + uint32_t primeOrderSize; /*!< Number of element in primeOrder array */ + uint32_t scalarMulSize; /*!< Number of element in scalarMul array */ + uint32_t modulusSize; /*!< Number of element in modulus, coefA, pointX and pointY arrays */ + uint32_t coefSign; /*!< Curve coefficient a sign */ + const uint8_t *coefA; /*!< Pointer to curve coefficient |a| (Array of modulusSize elements) */ + const uint8_t *coefB; /*!< pointer to curve coefficient b */ + const uint8_t *modulus; /*!< Pointer to curve modulus value p (Array of modulusSize elements) */ + const uint8_t *pointX; /*!< Pointer to point P coordinate xP (Array of modulusSize elements) */ + const uint8_t *pointY; /*!< Pointer to point P coordinate yP (Array of modulusSize elements) */ + const uint8_t *scalarMul; /*!< Pointer to scalar multiplier k (Array of scalarMulSize elements) */ + const uint8_t *primeOrder; /*!< pointer to order of the curve */ +} PKA_ECCMulExInTypeDef; + +typedef struct +{ + uint32_t modulusSize; /*!< Number of element in coefA, coefB, modulus, pointX and pointY arrays */ + uint32_t coefSign; /*!< Curve coefficient a sign */ + const uint8_t *coefA; /*!< Pointer to curve coefficient |a| (Array of modulusSize elements) */ + const uint8_t *coefB; /*!< Pointer to curve coefficient b (Array of modulusSize elements) */ + const uint8_t *modulus; /*!< Pointer to curve modulus value p (Array of modulusSize elements) */ + const uint8_t *pointX; /*!< Pointer to point P coordinate xP (Array of modulusSize elements) */ + const uint8_t *pointY; /*!< Pointer to point P coordinate yP (Array of modulusSize elements) */ + const uint32_t *pMontgomeryParam; /*!< pointer to montgomery param R2 (modulus N) */ +} PKA_PointCheckInTypeDef; + +typedef struct +{ + uint32_t size; /*!< Number of element in popA array */ + const uint8_t *pOpDp; /*!< Pointer to operand dP (Array of size/2 elements) */ + const uint8_t *pOpDq; /*!< Pointer to operand dQ (Array of size/2 elements) */ + const uint8_t *pOpQinv; /*!< Pointer to operand qinv (Array of size/2 elements) */ + const uint8_t *pPrimeP; /*!< Pointer to prime p (Array of size/2 elements) */ + const uint8_t *pPrimeQ; /*!< Pointer to prime Q (Array of size/2 elements) */ + const uint8_t *popA; /*!< Pointer to operand A (Array of size elements) */ +} PKA_RSACRTExpInTypeDef; + +typedef struct +{ + uint32_t primeOrderSize; /*!< Number of element in primeOrder array */ + uint32_t modulusSize; /*!< Number of element in modulus array */ + uint32_t coefSign; /*!< Curve coefficient a sign */ + const uint8_t *coef; /*!< Pointer to curve coefficient |a| (Array of modulusSize elements) */ + const uint8_t *modulus; /*!< Pointer to curve modulus value p (Array of modulusSize elements) */ + const uint8_t *basePointX; /*!< Pointer to curve base point xG (Array of modulusSize elements) */ + const uint8_t *basePointY; /*!< Pointer to curve base point yG (Array of modulusSize elements) */ + const uint8_t *pPubKeyCurvePtX; /*!< Pointer to public-key curve point xQ (Array of modulusSize elements) */ + const uint8_t *pPubKeyCurvePtY; /*!< Pointer to public-key curve point yQ (Array of modulusSize elements) */ + const uint8_t *RSign; /*!< Pointer to signature part r (Array of primeOrderSize elements) */ + const uint8_t *SSign; /*!< Pointer to signature part s (Array of primeOrderSize elements) */ + const uint8_t *hash; /*!< Pointer to hash of the message e (Array of primeOrderSize elements) */ + const uint8_t *primeOrder; /*!< Pointer to order of the curve n (Array of primeOrderSize elements) */ +} PKA_ECDSAVerifInTypeDef; + +typedef struct +{ + uint32_t primeOrderSize; /*!< Number of element in primeOrder array */ + uint32_t modulusSize; /*!< Number of element in modulus array */ + uint32_t coefSign; /*!< Curve coefficient a sign */ + const uint8_t *coef; /*!< Pointer to curve coefficient |a| (Array of modulusSize elements) */ + const uint8_t *coefB; /*!< Pointer to B coefficient (Array of modulusSize elements) */ + const uint8_t *modulus; /*!< Pointer to curve modulus value p (Array of modulusSize elements) */ + const uint8_t *integer; /*!< Pointer to random integer k (Array of primeOrderSize elements) */ + const uint8_t *basePointX; /*!< Pointer to curve base point xG (Array of modulusSize elements) */ + const uint8_t *basePointY; /*!< Pointer to curve base point yG (Array of modulusSize elements) */ + const uint8_t *hash; /*!< Pointer to hash of the message (Array of primeOrderSize elements) */ + const uint8_t *privateKey; /*!< Pointer to private key d (Array of primeOrderSize elements) */ + const uint8_t *primeOrder; /*!< Pointer to order of the curve n (Array of primeOrderSize elements) */ +} PKA_ECDSASignInTypeDef; + +typedef struct +{ + uint8_t *RSign; /*!< Pointer to signature part r (Array of modulusSize elements) */ + uint8_t *SSign; /*!< Pointer to signature part s (Array of modulusSize elements) */ +} PKA_ECDSASignOutTypeDef; + +typedef struct +{ + uint8_t *ptX; /*!< Pointer to point P coordinate xP (Array of modulusSize elements) */ + uint8_t *ptY; /*!< Pointer to point P coordinate yP (Array of modulusSize elements) */ +} PKA_ECDSASignOutExtParamTypeDef, PKA_ECCMulOutTypeDef, PKA_ECCProjective2AffineOutTypeDef, +PKA_ECCDoubleBaseLadderOutTypeDef; + +typedef struct +{ + uint8_t *ptX; /*!< pointer to point P coordinate xP */ + uint8_t *ptY; /*!< pointer to point P coordinate yP */ + uint8_t *ptZ; /*!< pointer to point P coordinate zP */ +} PKA_ECCCompleteAdditionOutTypeDef; + +typedef struct +{ + uint32_t expSize; /*!< Number of element in pExp array */ + uint32_t OpSize; /*!< Number of element in pOp1 and pMod arrays */ + const uint8_t *pExp; /*!< Pointer to Exponent (Array of expSize elements) */ + const uint8_t *pOp1; /*!< Pointer to Operand (Array of OpSize elements) */ + const uint8_t *pMod; /*!< Pointer to modulus (Array of OpSize elements) */ +} PKA_ModExpInTypeDef; + +typedef struct +{ + uint32_t expSize; /*!< Size of the operand in bytes */ + uint32_t OpSize; /*!< Size of the operand in bytes */ + const uint8_t *pOp1; /*!< Pointer to Operand 1 */ + const uint8_t *pExp; /*!< Pointer to Exponent */ + const uint8_t *pMod; /*!< Pointer to Operand 1 */ + const uint8_t *pPhi; /*!< Pointer to Phi value */ +} PKA_ModExpProtectModeInTypeDef; + +typedef struct +{ + uint32_t expSize; /*!< Number of element in pExp and pMontgomeryParam arrays */ + uint32_t OpSize; /*!< Number of element in pOp1 and pMod arrays */ + const uint8_t *pExp; /*!< Pointer to Exponent (Array of expSize elements) */ + const uint8_t *pOp1; /*!< Pointer to Operand (Array of OpSize elements) */ + const uint8_t *pMod; /*!< Pointer to modulus (Array of OpSize elements) */ + const uint32_t *pMontgomeryParam; /*!< Pointer to Montgomery parameter (Array of expSize/4 elements) */ +} PKA_ModExpFastModeInTypeDef; + +typedef struct +{ + uint32_t size; /*!< Number of element in pOp1 array */ + const uint8_t *pOp1; /*!< Pointer to Operand (Array of size elements) */ +} PKA_MontgomeryParamInTypeDef; + +typedef struct +{ + uint32_t size; /*!< Number of element in pOp1 and pOp2 arrays */ + const uint32_t *pOp1; /*!< Pointer to Operand 1 (Array of size elements) */ + const uint32_t *pOp2; /*!< Pointer to Operand 2 (Array of size elements) */ +} PKA_AddInTypeDef, PKA_SubInTypeDef, PKA_MulInTypeDef, PKA_CmpInTypeDef; + +typedef struct +{ + uint32_t size; /*!< Number of element in pOp1 array */ + const uint32_t *pOp1; /*!< Pointer to Operand 1 (Array of size elements) */ + const uint8_t *pMod; /*!< Pointer to modulus value n (Array of size*4 elements) */ +} PKA_ModInvInTypeDef; + +typedef struct +{ + uint32_t OpSize; /*!< Number of element in pOp1 array */ + uint32_t modSize; /*!< Number of element in pMod array */ + const uint32_t *pOp1; /*!< Pointer to Operand 1 (Array of OpSize elements) */ + const uint8_t *pMod; /*!< Pointer to modulus value n (Array of modSize elements) */ +} PKA_ModRedInTypeDef; + +typedef struct +{ + uint32_t size; /*!< Number of element in pOp1 and pOp2 arrays */ + const uint32_t *pOp1; /*!< Pointer to Operand 1 (Array of size elements) */ + const uint32_t *pOp2; /*!< Pointer to Operand 2 (Array of size elements) */ + const uint8_t *pOp3; /*!< Pointer to Operand 3 (Array of size*4 elements) */ +} PKA_ModAddInTypeDef, PKA_ModSubInTypeDef, PKA_MontgomeryMulInTypeDef; + +typedef struct +{ + uint32_t primeOrderSize; /*!< curve prime order n length */ + uint32_t modulusSize; /*!< curve modulus p length */ + uint32_t coefSign; /*!< curve coefficient a sign */ + const uint8_t *coefA; /*!< pointer to curve coefficient |a| */ + const uint8_t *modulus; /*!< pointer to curve modulus value p */ + const uint8_t *integerK; /*!< pointer to cryptographically secure random integer k */ + const uint8_t *integerM; /*!< pointer to cryptographically secure random integer m */ + const uint8_t *basePointX1; /*!< pointer to curve base first point coordinate x */ + const uint8_t *basePointY1; /*!< pointer to curve base first point coordinate y */ + const uint8_t *basePointZ1; /*!< pointer to curve base first point coordinate z */ + const uint8_t *basePointX2; /*!< pointer to curve base second point coordinate x */ + const uint8_t *basePointY2; /*!< pointer to curve base second point coordinate y */ + const uint8_t *basePointZ2; /*!< pointer to curve base second point coordinate z */ +} PKA_ECCDoubleBaseLadderInTypeDef; + +typedef struct +{ + uint32_t modulusSize; /*!< curve modulus p length */ + const uint8_t *modulus; /*!< pointer to curve modulus value p */ + const uint8_t *basePointX; /*!< pointer to curve base point coordinate x */ + const uint8_t *basePointY; /*!< pointer to curve base point coordinate y */ + const uint8_t *basePointZ; /*!< pointer to curve base point coordinate z */ + const uint32_t *pMontgomeryParam; /*!< pointer to montgomery parameter R2 modulus n*/ +} PKA_ECCProjective2AffineInTypeDef; + +typedef struct +{ + uint32_t modulusSize; /*!< curve modulus p length */ + uint32_t coefSign; /*!< curve coefficient a sign */ + const uint8_t *modulus; /*!< pointer to curve modulus value p */ + const uint8_t *coefA; /*!< pointer to curve coefficient |a| */ + const uint8_t *basePointX1; /*!< pointer to curve base first point coordinate x */ + const uint8_t *basePointY1; /*!< pointer to curve base first point coordinate y */ + const uint8_t *basePointZ1; /*!< pointer to curve base first point coordinate z */ + const uint8_t *basePointX2; /*!< pointer to curve base second point coordinate x */ + const uint8_t *basePointY2; /*!< pointer to curve base second point coordinate y */ + const uint8_t *basePointZ2; /*!< pointer to curve base second point coordinate z */ +} PKA_ECCCompleteAdditionInTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PKA_Exported_Constants PKA Exported Constants + * @{ + */ + +/** @defgroup PKA_Mode PKA mode + * @{ + */ +#define PKA_MODE_MONTGOMERY_PARAM (0x00000001U) +#define PKA_MODE_MODULAR_EXP (0x00000000U) +#define PKA_MODE_MODULAR_EXP_FAST_MODE (0x00000002U) +#define PKA_MODE_ECC_MUL (0x00000020U) +#define PKA_MODE_ECDSA_SIGNATURE (0x00000024U) +#define PKA_MODE_ECDSA_VERIFICATION (0x00000026U) +#define PKA_MODE_POINT_CHECK (0x00000028U) +#define PKA_MODE_RSA_CRT_EXP (0x00000007U) +#define PKA_MODE_MODULAR_INV (0x00000008U) +#define PKA_MODE_ARITHMETIC_ADD (0x00000009U) +#define PKA_MODE_ARITHMETIC_SUB (0x0000000AU) +#define PKA_MODE_ARITHMETIC_MUL (0x0000000BU) +#define PKA_MODE_COMPARISON (0x0000000CU) +#define PKA_MODE_MODULAR_RED (0x0000000DU) +#define PKA_MODE_MODULAR_ADD (0x0000000EU) +#define PKA_MODE_MODULAR_SUB (0x0000000FU) +#define PKA_MODE_MONTGOMERY_MUL (0x00000010U) +#define PKA_MODE_ECC_PROJECTIVE_AFF (0x0000002FU) +#define PKA_MODE_DOUBLE_BASE_LADDER (0x00000027U) +#define PKA_MODE_ECC_COMPLETE_ADD (0x00000023U) +#define PKA_MODE_MODULAR_EXP_PROTECT (0x00000003U) +/** + * @} + */ + +/** @defgroup PKA_Interrupt_configuration_definition PKA Interrupt configuration definition + * @brief PKA Interrupt definition + * @{ + */ +#define PKA_IT_PROCEND PKA_CR_PROCENDIE +#define PKA_IT_ADDRERR PKA_CR_ADDRERRIE +#define PKA_IT_RAMERR PKA_CR_RAMERRIE +#define PKA_IT_OPERR PKA_CR_OPERRIE + +/** + * @} + */ + +/** @defgroup PKA_Flag_definition PKA Flag definition + * @{ + */ +#define PKA_FLAG_PROCEND PKA_SR_PROCENDF +#define PKA_FLAG_ADDRERR PKA_SR_ADDRERRF +#define PKA_FLAG_RAMERR PKA_SR_RAMERRF +#define PKA_FLAG_OPERR PKA_SR_OPERRF + +/** + * @} + */ + +/** @defgroup PKA_Operation_Status PKA Operation Status + * @{ + */ +#define PKA_NO_ERROR 0xD60DUL +#define PKA_FAILED_COMPUTATION 0xCBC9UL +#define PKA_RPART_SIGNATURE_NULL 0xA3B7UL +#define PKA_SPART_SIGNATURE_NULL 0xF946UL + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup PKA_Exported_Macros PKA Exported Macros + * @{ + */ + +/** @brief Reset PKA handle state. + * @param __HANDLE__ specifies the PKA Handle + * @retval None + */ +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +#define __HAL_PKA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_PKA_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_PKA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PKA_STATE_RESET) +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + +/** @brief Enable the specified PKA interrupt. + * @param __HANDLE__ specifies the PKA Handle + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref PKA_IT_PROCEND End Of Operation interrupt enable + * @arg @ref PKA_IT_ADDRERR Address error interrupt enable + * @arg @ref PKA_IT_RAMERR RAM error interrupt enable + * @arg @ref PKA_IT_OPERR Operation error interrupt enable + * @retval None + */ +#define __HAL_PKA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** @brief Disable the specified PKA interrupt. + * @param __HANDLE__ specifies the PKA Handle + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref PKA_IT_PROCEND End Of Operation interrupt enable + * @arg @ref PKA_IT_ADDRERR Address error interrupt enable + * @arg @ref PKA_IT_RAMERR RAM error interrupt enable + * @arg @ref PKA_IT_OPERR Operation error interrupt enable + * @retval None + */ +#define __HAL_PKA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified PKA interrupt source is enabled or not. + * @param __HANDLE__ specifies the PKA Handle + * @param __INTERRUPT__ specifies the PKA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref PKA_IT_PROCEND End Of Operation interrupt enable + * @arg @ref PKA_IT_ADDRERR Address error interrupt enable + * @arg @ref PKA_IT_RAMERR RAM error interrupt enable + * @arg @ref PKA_IT_OPERR Operation error interrupt enable + * @retval The new state of __INTERRUPT__ (SET or RESET) + */ +#define __HAL_PKA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified PKA flag is set or not. + * @param __HANDLE__ specifies the PKA Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref PKA_FLAG_PROCEND End Of Operation + * @arg @ref PKA_FLAG_ADDRERR Address error + * @arg @ref PKA_FLAG_RAMERR RAM error + * @arg @ref PKA_FLAG_OPERR Operation error + * @retval The new state of __FLAG__ (SET or RESET) + */ +#define __HAL_PKA_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->SR)\ + & (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the PKA pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the PKA Handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref PKA_FLAG_PROCEND End Of Operation + * @arg @ref PKA_FLAG_ADDRERR Address error + * @arg @ref PKA_FLAG_RAMERR RAM error + * @arg @ref PKA_FLAG_OPERR Operation error + * @retval None + */ +#define __HAL_PKA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__)) + +/** @brief Enable the specified PKA peripheral. + * @param __HANDLE__ specifies the PKA Handle + * @retval None + */ +#define __HAL_PKA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR, PKA_CR_EN)) + +/** @brief Disable the specified PKA peripheral. + * @param __HANDLE__ specifies the PKA Handle + * @retval None + */ +#define __HAL_PKA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR, PKA_CR_EN)) + +/** @brief Start a PKA operation. + * @param __HANDLE__ specifies the PKA Handle + * @retval None + */ +#define __HAL_PKA_START(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR, PKA_CR_START)) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PKA_Exported_Functions + * @{ + */ + +/** @addtogroup PKA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_PKA_Init(PKA_HandleTypeDef *hpka); +HAL_StatusTypeDef HAL_PKA_DeInit(PKA_HandleTypeDef *hpka); +void HAL_PKA_MspInit(PKA_HandleTypeDef *hpka); +void HAL_PKA_MspDeInit(PKA_HandleTypeDef *hpka); + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_PKA_RegisterCallback(PKA_HandleTypeDef *hpka, HAL_PKA_CallbackIDTypeDef CallbackID, + pPKA_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PKA_UnRegisterCallback(PKA_HandleTypeDef *hpka, HAL_PKA_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup PKA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +/* High Level Functions *******************************************************/ +HAL_StatusTypeDef HAL_PKA_ModExp(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModExp_IT(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModExpFastMode(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModExpFastMode_IT(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModExpProtectMode(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in, + uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModExpProtectMode_IT(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in); +void HAL_PKA_ModExp_GetResult(PKA_HandleTypeDef *hpka, uint8_t *pRes); + +HAL_StatusTypeDef HAL_PKA_ECDSASign(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECDSASign_IT(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in); +void HAL_PKA_ECDSASign_GetResult(PKA_HandleTypeDef *hpka, PKA_ECDSASignOutTypeDef *out, + PKA_ECDSASignOutExtParamTypeDef *outExt); + +HAL_StatusTypeDef HAL_PKA_ECDSAVerif(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECDSAVerif_IT(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in); +uint32_t HAL_PKA_ECDSAVerif_IsValidSignature(PKA_HandleTypeDef const *const hpka); + +HAL_StatusTypeDef HAL_PKA_RSACRTExp(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_RSACRTExp_IT(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in); +void HAL_PKA_RSACRTExp_GetResult(PKA_HandleTypeDef *hpka, uint8_t *pRes); + +HAL_StatusTypeDef HAL_PKA_PointCheck(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_PointCheck_IT(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in); +uint32_t HAL_PKA_PointCheck_IsOnCurve(PKA_HandleTypeDef const *const hpka); + +HAL_StatusTypeDef HAL_PKA_ECCMul(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECCMul_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ECCMulEx(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECCMulEx_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in); +void HAL_PKA_ECCMul_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCMulOutTypeDef *out); + +HAL_StatusTypeDef HAL_PKA_Add(PKA_HandleTypeDef *hpka, PKA_AddInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_Add_IT(PKA_HandleTypeDef *hpka, PKA_AddInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_Sub(PKA_HandleTypeDef *hpka, PKA_SubInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_Sub_IT(PKA_HandleTypeDef *hpka, PKA_SubInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_Cmp(PKA_HandleTypeDef *hpka, PKA_CmpInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_Cmp_IT(PKA_HandleTypeDef *hpka, PKA_CmpInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_Mul(PKA_HandleTypeDef *hpka, PKA_MulInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_Mul_IT(PKA_HandleTypeDef *hpka, PKA_MulInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModAdd(PKA_HandleTypeDef *hpka, PKA_ModAddInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModAdd_IT(PKA_HandleTypeDef *hpka, PKA_ModAddInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModSub(PKA_HandleTypeDef *hpka, PKA_ModSubInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModSub_IT(PKA_HandleTypeDef *hpka, PKA_ModSubInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModInv(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModInv_IT(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_ModRed(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ModRed_IT(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in); +HAL_StatusTypeDef HAL_PKA_MontgomeryMul(PKA_HandleTypeDef *hpka, PKA_MontgomeryMulInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_MontgomeryMul_IT(PKA_HandleTypeDef *hpka, PKA_MontgomeryMulInTypeDef *in); +void HAL_PKA_Arithmetic_GetResult(PKA_HandleTypeDef *hpka, uint32_t *pRes); + +HAL_StatusTypeDef HAL_PKA_MontgomeryParam(PKA_HandleTypeDef *hpka, PKA_MontgomeryParamInTypeDef *in, uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_MontgomeryParam_IT(PKA_HandleTypeDef *hpka, PKA_MontgomeryParamInTypeDef *in); +void HAL_PKA_MontgomeryParam_GetResult(PKA_HandleTypeDef *hpka, uint32_t *pRes); + +HAL_StatusTypeDef HAL_PKA_ECCDoubleBaseLadder(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in, + uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECCDoubleBaseLadder_IT(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in); +void HAL_PKA_ECCDoubleBaseLadder_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderOutTypeDef *out); + +HAL_StatusTypeDef HAL_PKA_ECCProjective2Affine(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in, + uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECCProjective2Affine_IT(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in); +void HAL_PKA_ECCProjective2Affine_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineOutTypeDef *out); + +HAL_StatusTypeDef HAL_PKA_ECCCompleteAddition(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in, + uint32_t Timeout); +HAL_StatusTypeDef HAL_PKA_ECCCompleteAddition_IT(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in); +void HAL_PKA_ECCCompleteAddition_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionOutTypeDef *out); + +HAL_StatusTypeDef HAL_PKA_Abort(PKA_HandleTypeDef *hpka); +void HAL_PKA_RAMReset(PKA_HandleTypeDef *hpka); +void HAL_PKA_OperationCpltCallback(PKA_HandleTypeDef *hpka); +void HAL_PKA_ErrorCallback(PKA_HandleTypeDef *hpka); +void HAL_PKA_IRQHandler(PKA_HandleTypeDef *hpka); +/** + * @} + */ + +/** @addtogroup PKA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_PKA_StateTypeDef HAL_PKA_GetState(const PKA_HandleTypeDef *hpka); +uint32_t HAL_PKA_GetError(const PKA_HandleTypeDef *hpka); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PKA) && defined(HAL_PKA_MODULE_ENABLED) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_PKA_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pssi.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pssi.h new file mode 100644 index 000000000..70167aba4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pssi.h @@ -0,0 +1,568 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pssi.h + * @author MCD Application Team + * @brief Header file of PSSI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PSSI_H +#define STM32H7RSxx_HAL_PSSI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined(PSSI) + +#ifndef USE_HAL_PSSI_REGISTER_CALLBACKS +/* For backward compatibility, if USE_HAL_PSSI_REGISTER_CALLBACKS not defined, define it to 1*/ +#define USE_HAL_PSSI_REGISTER_CALLBACKS 0U +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + +/** @addtogroup PSSI PSSI + * @brief PSSI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PSSI_Exported_Types PSSI Exported Types + * @{ + */ + + +/** + * @brief PSSI Init structure definition + */ +typedef struct +{ + uint32_t DataWidth; /* !< Configures the data width. + This parameter can be a value of @ref PSSI_DATA_WIDTH. */ + uint32_t BusWidth; /* !< Configures the parallel bus width. + This parameter can be a value of @ref PSSI_BUS_WIDTH. */ + uint32_t ControlSignal; /* !< Configures Data enable and Data ready. + This parameter can be a value of @ref ControlSignal_Configuration. */ + uint32_t ClockPolarity; /* !< Configures the PSSI Input Clock polarity. + This parameter can be a value of @ref Clock_Polarity. */ + uint32_t DataEnablePolarity; /* !< Configures the PSSI Data Enable polarity. + This parameter can be a value of @ref Data_Enable_Polarity. */ + uint32_t ReadyPolarity; /* !< Configures the PSSI Ready polarity. + This parameter can be a value of @ref Ready_Polarity. */ + +} PSSI_InitTypeDef; + + +/** + * @brief HAL PSSI State structures definition + */ +typedef enum +{ + HAL_PSSI_STATE_RESET = 0x00U, /* !< PSSI not yet initialized or disabled */ + HAL_PSSI_STATE_READY = 0x01U, /* !< Peripheral initialized and ready for use */ + HAL_PSSI_STATE_BUSY = 0x02U, /* !< An internal process is ongoing */ + HAL_PSSI_STATE_BUSY_TX = 0x03U, /* !< Transmit process is ongoing */ + HAL_PSSI_STATE_BUSY_RX = 0x04U, /* !< Receive process is ongoing */ + HAL_PSSI_STATE_TIMEOUT = 0x05U, /* !< Timeout state */ + HAL_PSSI_STATE_ERROR = 0x06U, /* !< PSSI state error */ + HAL_PSSI_STATE_ABORT = 0x07U, /* !< PSSI process is aborted */ + +} HAL_PSSI_StateTypeDef; + +/** + * @brief PSSI handle Structure definition + */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +typedef struct __PSSI_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ +{ + PSSI_TypeDef *Instance; /*!< PSSI register base address. */ + PSSI_InitTypeDef Init; /*!< PSSI Initialization Structure. */ + uint32_t *pBuffPtr; /*!< PSSI Data buffer. */ + uint32_t XferCount; /*!< PSSI transfer count */ + uint32_t XferSize; /*!< PSSI transfer size */ +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< PSSI Tx DMA Handle parameters */ + DMA_HandleTypeDef *hdmarx; /*!< PSSI Rx DMA Handle parameters */ +#endif /*HAL_DMA_MODULE_ENABLED*/ + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ + void (* RxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ + void (* ErrorCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ + void (* AbortCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer error callback. */ + + void (* MspInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp Init callback. */ + void (* MspDeInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp DeInit callback. */ +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + + HAL_LockTypeDef Lock; /*!< PSSI lock. */ + __IO HAL_PSSI_StateTypeDef State; /*!< PSSI transfer state. */ + __IO uint32_t ErrorCode; /*!< PSSI error code. */ + +} PSSI_HandleTypeDef; + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +/** + * @brief HAL PSSI Callback pointer definition + */ +typedef void (*pPSSI_CallbackTypeDef)(PSSI_HandleTypeDef *hpssi); /*!< Pointer to a PSSI common callback function */ + +/** + * @brief HAL PSSI Callback ID enumeration definition + */ +typedef enum +{ + HAL_PSSI_TX_COMPLETE_CB_ID = 0x00U, /*!< PSSI Tx Transfer completed callback ID */ + HAL_PSSI_RX_COMPLETE_CB_ID = 0x01U, /*!< PSSI Rx Transfer completed callback ID */ + HAL_PSSI_ERROR_CB_ID = 0x03U, /*!< PSSI Error callback ID */ + HAL_PSSI_ABORT_CB_ID = 0x04U, /*!< PSSI Abort callback ID */ + + HAL_PSSI_MSPINIT_CB_ID = 0x05U, /*!< PSSI Msp Init callback ID */ + HAL_PSSI_MSPDEINIT_CB_ID = 0x06U /*!< PSSI Msp DeInit callback ID */ + +} HAL_PSSI_CallbackIDTypeDef; +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PSSI_Exported_Constants PSSI Exported Constants + * @{ + */ + +/** @defgroup PSSI_Error_Code PSSI Error Code + * @{ + */ +#define HAL_PSSI_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_PSSI_ERROR_NOT_SUPPORTED 0x00000001U /*!< Not supported operation */ +#define HAL_PSSI_ERROR_UNDER_RUN 0x00000002U /*!< FIFO Under-run error */ +#define HAL_PSSI_ERROR_OVER_RUN 0x00000004U /*!< FIFO Over-run error */ +#define HAL_PSSI_ERROR_DMA 0x00000008U /*!< Dma error */ +#define HAL_PSSI_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +#define HAL_PSSI_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid callback error */ +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PSSI_DATA_WIDTH PSSI Data Width + * @{ + */ + +#define HAL_PSSI_8BITS 0x00000000U /*!< 8 Bits */ +#define HAL_PSSI_16BITS 0x00000001U /*!< 16 Bits */ +#define HAL_PSSI_32BITS 0x00000002U /*!< 32 Bits */ +/** + * @} + */ + +/** @defgroup PSSI_BUS_WIDTH PSSI Bus Width + * @{ + */ + +#define HAL_PSSI_8LINES 0x00000000U /*!< 8 data lines */ +#define HAL_PSSI_16LINES PSSI_CR_EDM /*!< 16 data lines */ +/** + * @} + */ +/** @defgroup PSSI_MODE PSSI mode + * @{ + */ +#define HAL_PSSI_UNIDIRECTIONAL 0x00000000U /*!< Uni-directional mode */ +#define HAL_PSSI_BIDIRECTIONAL 0x00000001U /*!< Bi-directional mode */ +/** + * @} + */ + +/** @defgroup ControlSignal_Configuration ControlSignal Configuration + * @{ + */ +#define HAL_PSSI_DE_RDY_DISABLE (0x0U << PSSI_CR_DERDYCFG_Pos) /*!< Neither DE nor RDY are enabled */ +#define HAL_PSSI_RDY_ENABLE (0x1U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled */ +#define HAL_PSSI_DE_ENABLE (0x2U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled */ +#define HAL_PSSI_DE_RDY_ALT_ENABLE (0x3U << PSSI_CR_DERDYCFG_Pos) /*!< Both RDY and DE alternate functions enabled */ +#define HAL_PSSI_MAP_RDY_BIDIR_ENABLE (0x4U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on RDY pin */ +#define HAL_PSSI_RDY_MAP_ENABLE (0x5U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled, mapped to DE pin */ +#define HAL_PSSI_DE_MAP_ENABLE (0x6U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled, mapped to RDY pin */ +#define HAL_PSSI_MAP_DE_BIDIR_ENABLE (0x7U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on DE pin */ + +/** + * @} + */ + + +/** @defgroup Data_Enable_Polarity Data Enable Polarity + * @{ + */ +#define HAL_PSSI_DEPOL_ACTIVE_LOW 0x0U /*!< Active Low */ +#define HAL_PSSI_DEPOL_ACTIVE_HIGH PSSI_CR_DEPOL /*!< Active High */ +/** + * @} + */ +/** @defgroup Ready_Polarity Ready Polarity + * @{ + */ +#define HAL_PSSI_RDYPOL_ACTIVE_LOW 0x0U /*!< Active Low */ +#define HAL_PSSI_RDYPOL_ACTIVE_HIGH PSSI_CR_RDYPOL /*!< Active High */ +/** + * @} + */ + +/** @defgroup Clock_Polarity Clock Polarity + * @{ + */ +#define HAL_PSSI_FALLING_EDGE 0x0U /*!< Fallling Edge */ +#define HAL_PSSI_RISING_EDGE 0x1U /*!< Rising Edge */ +/** + * @} + */ + +/** @defgroup Clock_Source Clock Source + * @{ + */ +#define HAL_PSSI_CLOCK_EXT 0x0U /*!< External Clock */ +#define HAL_PSSI_CLOCK_INT PSSI_CR_CKSRC /*!< Internal Clock */ +/** + * @} + */ + + +/** @defgroup PSSI_DEFINITION PSSI definitions + * @{ + */ + +#define PSSI_MAX_NBYTE_SIZE 0x10000U /* 64 KB */ +#define PSSI_TIMEOUT_TRANSMIT 0x0000FFFFU /*!< Timeout Value */ + +#define PSSI_CR_OUTEN_INPUT 0x00000000U /*!< Input Mode */ +#define PSSI_CR_OUTEN_OUTPUT PSSI_CR_OUTEN /*!< Output Mode */ + +#define PSSI_CR_DMA_ENABLE PSSI_CR_DMAEN /*!< DMA Mode Enable */ +#define PSSI_CR_DMA_DISABLE (~PSSI_CR_DMAEN) /*!< DMA Mode Disable*/ + +#define PSSI_CR_16BITS PSSI_CR_EDM /*!< 16 Lines Mode */ +#define PSSI_CR_8BITS (~PSSI_CR_EDM) /*!< 8 Lines Mode */ + +#define PSSI_FLAG_RTT1B PSSI_SR_RTT1B /*!< 1 Byte Fifo Flag */ +#define PSSI_FLAG_RTT4B PSSI_SR_RTT4B /*!< 4 Bytes Fifo Flag*/ + + + +/** + * @} + */ + +/** @defgroup PSSI_Interrupts PSSI Interrupts + * @{ + */ + +#define PSSI_FLAG_OVR_RIS PSSI_RIS_OVR_RIS /*!< Overrun, Underrun errors flag */ +#define PSSI_FLAG_MASK PSSI_RIS_OVR_RIS_Msk /*!< Overrun, Underrun errors Mask */ +#define PSSI_FLAG_OVR_MIS PSSI_MIS_OVR_MIS /*!< Overrun, Underrun masked errors flag */ +/** + * @} + */ + + + +/** + * @} + */ +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup PSSI_Exported_Macros PSSI Exported Macros + * @{ + */ + +/** @brief Reset PSSI handle state + * @param __HANDLE__ specifies the PSSI handle. + * @retval None + */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +#define HAL_PSSI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_PSSI_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + }while(0) +#else +#define HAL_PSSI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PSSI_STATE_RESET) +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + + +/** + * @brief Enable the PSSI. + * @param __HANDLE__ PSSI handle + * @retval None. + */ +#define HAL_PSSI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= PSSI_CR_ENABLE) +/** + * @brief Disable the PSSI. + * @param __HANDLE__ PSSI handle + * @retval None. + */ +#define HAL_PSSI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~PSSI_CR_ENABLE)) + +/* PSSI pripheral STATUS */ +/** + * @brief Get the PSSI pending flags. + * @param __HANDLE__ PSSI handle + * @param __FLAG__ flag to check. + * This parameter can be any combination of the following values: + * @arg PSSI_FLAG_RTT1B: FIFO is ready to transfer one byte + * @arg PSSI_FLAG_RTT4B: FIFO is ready to transfer four bytes + * @retval The state of FLAG. + */ + +#define HAL_PSSI_GET_STATUS(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR & (__FLAG__)) + + + +/* Interrupt & Flag management */ +/** + * @brief Get the PSSI pending flags. + * @param __HANDLE__ PSSI handle + * @param __FLAG__ flag to check. + * This parameter can be any combination of the following values: + * @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag + * @retval The state of FLAG. + */ +#define HAL_PSSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->RIS & (__FLAG__)) + +/** + * @brief Clear the PSSI pending flags. + * @param __HANDLE__ PSSI handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag + * @retval None + */ +#define HAL_PSSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enable the specified PSSI interrupts. + * @param __HANDLE__ PSSI handle + * @param __INTERRUPT__ specifies the PSSI interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg PSSI_FLAG_OVR_RIS: Configuration error mask + * @retval None + */ +#define HAL_PSSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the specified PSSI interrupts. + * @param __HANDLE__ PSSI handle + * @param __INTERRUPT__ specifies the PSSI interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg PSSI_IT_OVR_IE: Configuration error mask + * @retval None + */ +#define HAL_PSSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified PSSI interrupt source is enabled or not. + * @param __HANDLE__ PSSI handle + * @param __INTERRUPT__ specifies the PSSI interrupt source to check. + * This parameter can be one of the following values: + * @arg PSSI_IT_OVR_IE: Data Buffer overrun/underrun error interrupt mask + * @retval The state of INTERRUPT source. + */ +#define HAL_PSSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) + + +/** + * @brief Check whether the PSSI Control signal is valid. + * @param __CONTROL__ Control signals configuration + * @retval Valid or not. + */ + +#define IS_PSSI_CONTROL_SIGNAL(__CONTROL__) (((__CONTROL__) == HAL_PSSI_DE_RDY_DISABLE ) || \ + ((__CONTROL__) == HAL_PSSI_RDY_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_DE_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_DE_RDY_ALT_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_MAP_RDY_BIDIR_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_RDY_MAP_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_DE_MAP_ENABLE ) || \ + ((__CONTROL__) == HAL_PSSI_MAP_DE_BIDIR_ENABLE )) + + + +/** + * @brief Check whether the PSSI Bus Width is valid. + * @param __BUSWIDTH__ PSSI Bush width + * @retval Valid or not. + */ + +#define IS_PSSI_BUSWIDTH(__BUSWIDTH__) (((__BUSWIDTH__) == HAL_PSSI_8LINES ) || \ + ((__BUSWIDTH__) == HAL_PSSI_16LINES )) + +/** + + * @brief Check whether the PSSI Clock Polarity is valid. + * @param __CLOCKPOL__ PSSI Clock Polarity + * @retval Valid or not. + */ + +#define IS_PSSI_CLOCK_POLARITY(__CLOCKPOL__) (((__CLOCKPOL__) == HAL_PSSI_FALLING_EDGE ) || \ + ((__CLOCKPOL__) == HAL_PSSI_RISING_EDGE )) + + +/** + * @brief Check whether the PSSI Data Enable Polarity is valid. + * @param __DEPOL__ PSSI DE Polarity + * @retval Valid or not. + */ + +#define IS_PSSI_DE_POLARITY(__DEPOL__) (((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_LOW ) || \ + ((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_HIGH )) + +/** + * @brief Check whether the PSSI Ready Polarity is valid. + * @param __RDYPOL__ PSSI RDY Polarity + * @retval Valid or not. + */ + +#define IS_PSSI_RDY_POLARITY(__RDYPOL__) (((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_LOW ) || \ + ((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_HIGH )) + +/** + * @brief Check whether the PSSI Clock source is valid. + * @param __CLOCKSRC__ PSSI Clock Source + * @retval Valid or not. + */ + +#define IS_PSSI_CLOCK_SOURCE(__CLOCKSRC__) (((__CLOCKSRC__) == HAL_PSSI_CLOCK_EXT ) || \ + ((__CLOCKSRC__) == HAL_PSSI_CLOCK_INT )) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PSSI_Exported_Functions PSSI Exported Functions + * @{ + */ + +/** @addtogroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +HAL_StatusTypeDef HAL_PSSI_Init(PSSI_HandleTypeDef *hpssi); +HAL_StatusTypeDef HAL_PSSI_DeInit(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_MspInit(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_MspDeInit(PSSI_HandleTypeDef *hpssi); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, + pPSSI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PSSI_UnRegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/** @addtogroup PSSI_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_PSSI_Transmit(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_PSSI_Receive(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_PSSI_Transmit_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size); +HAL_StatusTypeDef HAL_PSSI_Receive_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size); +HAL_StatusTypeDef HAL_PSSI_Abort_DMA(PSSI_HandleTypeDef *hpssi); +#endif /*HAL_DMA_MODULE_ENABLED*/ + +/** + * @} + */ + +/** @addtogroup PSSI_Exported_Functions_Group3 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State functions ***************************************************/ +HAL_PSSI_StateTypeDef HAL_PSSI_GetState(const PSSI_HandleTypeDef *hpssi); +uint32_t HAL_PSSI_GetError(const PSSI_HandleTypeDef *hpssi); + +/** + * @} + */ + +/** @addtogroup PSSI_Exported_Functions_Group4 Clock Source Selection function + * @{ + */ +/* Clock source selection function *******************************************/ +HAL_StatusTypeDef HAL_PSSI_ClockConfig(PSSI_HandleTypeDef *hpssi, uint32_t ClockSource); + +/** + * @} + */ + +/** @addtogroup PSSI_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi); +void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi); + +/** + * @} + */ + + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ + + +/* Private macros ------------------------------------------------------------*/ + + +/** + * @} + */ +#endif /* PSSI */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_PSSI_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr.h new file mode 100644 index 000000000..d4862a35d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr.h @@ -0,0 +1,589 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PWR_H +#define STM32H7RSxx_HAL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< Specifies the PVD detection level. + This parameter can be a value of + @ref PWR_PVD_Detection_Level. */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +} PWR_PVDTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR Wake-Up Pins + * @{ + */ +/* High level and No pull (default configuration) */ +#define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 /*!< Wakeup pin 1 (with high level polarity) */ + +/* High level and No pull */ +#define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1 /*!< Wakeup pin 1 (with high level polarity) */ + +/* Low level and No pull */ +#define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4) /*!< Wakeup pin 4 (with low level polarity) */ +#define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3) /*!< Wakeup pin 3 (with low level polarity) */ +#define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2) /*!< Wakeup pin 2 (with low level polarity) */ +#define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1) /*!< Wakeup pin 1 (with low level polarity) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Detection_Level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_1 (0x00000000U) /*!< Programmable voltage detector level 1 selection : 1V95 */ +#define PWR_PVDLEVEL_2 PWR_CR1_PLS_0 /*!< Programmable voltage detector level 2 selection : 2V1 */ +#define PWR_PVDLEVEL_3 PWR_CR1_PLS_1 /*!< Programmable voltage detector level 3 selection : 2V25 */ +#define PWR_PVDLEVEL_4 (PWR_CR1_PLS_1 | PWR_CR1_PLS_0) /*!< Programmable voltage detector level 4 selection : 2V4 */ +#define PWR_PVDLEVEL_5 PWR_CR1_PLS_2 /*!< Programmable voltage detector level 5 selection : 2V55 */ +#define PWR_PVDLEVEL_6 (PWR_CR1_PLS_2 | PWR_CR1_PLS_0) /*!< Programmable voltage detector level 6 selection : 2V7 */ +#define PWR_PVDLEVEL_7 (PWR_CR1_PLS_2 | PWR_CR1_PLS_1) /*!< Programmable voltage detector level 7 selection : 2V85 */ +#define PWR_PVDLEVEL_EXT_VOL (PWR_CR1_PLS_2 | PWR_CR1_PLS_1 | PWR_CR1_PLS_0) /*!< External input analog voltage (Compare internally to VREF) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_LP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +/* define for interface compatibility purpose */ +#define PWR_MAINREGULATOR_ON (0x0U) + +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI (0x01U) +#define PWR_SLEEPENTRY_WFE (0x02U) +#define PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR (0x03U) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI (0x01U) +#define PWR_STOPENTRY_WFE (0x02U) +#define PWR_STOPENTRY_WFE_NO_EVT_CLEAR (0x03U) +/** + * @} + */ + +/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale + * @{ + */ +#define PWR_REGULATOR_VOLTAGE_SCALE0 PWR_CSR4_VOS /*!< Voltage scaling range 0 (highest frequency) */ +#define PWR_REGULATOR_VOLTAGE_SCALE1 (0U) /*!< Voltage scaling range 1 (lowest power) */ + +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Status Flags + * Elements values convention: 0000 0XXX XXXY YYYYb + * - Y YYYY : Flag position in the XXX register (5 bits) + * - XXX XXX : Status register (6 bits) + * - 000001: SR1 register + * - 000010: CSR1 register + * - 000100: CSR2 register + * - 001000: CSR3 register + * - 010000: CSR4 register + * - 100000: WKUPCR register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +/* SR1 */ +#define PWR_FLAG_AVDO (0x002DU) /*!< Analog voltage detector output on VDDA */ +#define PWR_FLAG_PVDO (0x0024U) /*!< Programmable voltage detect output */ +#define PWR_FLAG_ACTVOSRDY (0x0021U) /*!< Voltage levels ready bit for currently used ACTVOS and SDHILEVEL */ +#define PWR_FLAG_ACTVOS (0x0020U) /*!< Programmable voltage detect output */ + +/* CSR1 */ +#define PWR_FLAG_TEMPH (0x0057U) /*!< Temperature level monitoring versus high threshold */ +#define PWR_FLAG_TEMPL (0x0056U) /*!< Temperature level monitoring versus low threshold */ +#define PWR_FLAG_VBATH (0x0055U) /*!< VBAT level monitoring versus high threshold */ +#define PWR_FLAG_VBATL (0x0054U) /*!< VBAT level monitoring versus low threshold */ +#define PWR_FLAG_BRRDY (0x0050U) /*!< Backup regulator ready */ + +/* CSR2 */ +#define PWR_FLAG_USB33RDY (0x009AU) /*!< USB supply ready */ +#define PWR_FLAG_SDEXTRDY (0x0090U) /*!< SMPS step-down converter external supply ready */ + +/* CSR3 */ +#define PWR_FLAG_SBF (0x0109U) /*!< System Standby flag */ +#define PWR_FLAG_STOPF (0x0108U) /*!< System Stop flag */ + +/* CSR4 */ +#define PWR_FLAG_VOSRDY (0x0201U) /*!< VOS Ready bit for VCORE voltage scaling output selection */ + +/* WKUPCR & WKUPFR */ +#define PWR_FLAG_WUF1 (0x0400U) /*!< Wakeup event on wakeup pin 1 */ +#define PWR_FLAG_WUF2 (0x0401U) /*!< Wakeup event on wakeup pin 2 */ +#define PWR_FLAG_WUF3 (0x0402U) /*!< Wakeup event on wakeup pin 3 */ +#define PWR_FLAG_WUF4 (0x0403U) /*!< Wakeup event on wakeup pin 4 */ +#define PWR_FLAG_WUF_ALL (0x0404U) /*!< Wakeup flag all */ +/** + * @} + */ + +/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask + * @{ + */ +#define PWR_EWUP_MASK (0x00FF0F0FU) +/** + * @} + */ + +/** @defgroup PWR_Flag_WUP PWR Flag WakeUp + * @{ + */ +#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1 +#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2 +#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3 +#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4 +#define PWR_FLAG_WKUP PWR_WKUPCR_WKUPC +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_ACTVOS: This flag indicates that the regulator voltage + * scaling output selection is ready. + * @arg PWR_FLAG_ACTVOSRDY: This flag indicates that the regulator voltage + * scaling output selection is ready. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD + * is enabled by the HAL_PWR_EnablePVD()function. + * The PVD is stopped by STANDBY mode. For this reason, + * this bit is equal to 0 after STANDBY or reset until the + * PVDE bit is set. + * @arg PWR_FLAG_AVDO: AVD Output. This flag is valid only if AVD is enabled + * by the HAL_PWREx_EnableAVD() function. The AVD is stopped by Standby mode. + * For this reason, this bit is equal to 0 after Standby or reset + * until the AVDE bit is set. + * @arg PWR_FLAG_BRRDY : Backup regulator ready flag. This bit is not reset + * when the device wakes up from Standby mode or by a system reset + * or power reset. + * @arg PWR_FLAG_VBATL: This flag indicates if the VBAT level is above + * the low monitoring threshold. + * @arg PWR_FLAG_VBATH: This flag indicates if the VBAT level is above + * the high monitoring threshold. + * @arg PWR_FLAG_TEMPL This flag indicates if the temperature level is above + * the low monitoring threshold. + * @arg PWR_FLAG_TEMPH: This flag indicates if the temperature level is above + * the high monitoring threshold. + * @arg PWR_FLAG_SDEXTRDY: This flag indicates if the external supply + * from the SMPS step-down converter is ready. + * @arg PWR_FLAG_USB33RDY: This flag indicates if the USB supply is ready. + * @arg PWR_FLAG_STOPF: STOP mode flag + * @arg PWR_FLAG_SBF: Standby mode flag + * @arg PWR_FLAG_VOSRDY When an internal regulator is used, this bit indicates + * that all the features allowed by the selected VOS can be used. + * @arg PWR_FLAG_WUF1: This flag indicates a wakeup event was + * received from WKUP1 pin. + * @arg PWR_FLAG_WUF2: This flag indicates a wakeup event was + * received from WKUP2 pin. + * @arg PWR_FLAG_WUF3: This flag indicates a wakeup event was + * received from WKUP3 pin. + * @arg PWR_FLAG_WUF4: This flag indicates a wakeup event was + * received from WKUP4 pin. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ( \ + ((__FLAG__) == PWR_FLAG_ACTVOS) ? ((PWR->SR1 & PWR_SR1_ACTVOS) == PWR_SR1_ACTVOS) : \ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY)? ((PWR->SR1 & PWR_SR1_ACTVOSRDY) == PWR_SR1_ACTVOSRDY) : \ + ((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->SR1 & PWR_SR1_PVDO) == PWR_SR1_PVDO) : \ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->SR1 & PWR_SR1_AVDO) == PWR_SR1_AVDO) : \ + ((__FLAG__) == PWR_FLAG_BRRDY) ? ((PWR->CSR1 & PWR_CSR1_BRRDY) == PWR_CSR1_BRRDY) : \ + ((__FLAG__) == PWR_FLAG_VBATL) ? ((PWR->CSR1 & PWR_CSR1_VBATL) == PWR_CSR1_VBATL) : \ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CSR1 & PWR_CSR1_VBATH) == PWR_CSR1_VBATH) : \ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CSR1 & PWR_CSR1_TEMPL) == PWR_CSR1_TEMPL) : \ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CSR1 & PWR_CSR1_TEMPH) == PWR_CSR1_TEMPH) : \ + ((__FLAG__) == PWR_FLAG_SDEXTRDY) ? ((PWR->CSR2 & PWR_CSR2_SDEXTRDY) == PWR_CSR2_SDEXTRDY) : \ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CSR2 & PWR_CSR2_USB33RDY) == PWR_CSR2_USB33RDY) : \ + ((__FLAG__) == PWR_FLAG_STOPF) ? ((PWR->CSR3 & PWR_CSR3_STOPF) == PWR_CSR3_STOPF) : \ + ((__FLAG__) == PWR_FLAG_SBF) ? ((PWR->CSR3 & PWR_CSR3_SBF) == PWR_CSR3_SBF) : \ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->CSR4 & PWR_CSR4_VOSRDY) == PWR_CSR4_VOSRDY) : \ + ((__FLAG__) == PWR_FLAG_WUF1) ? ((PWR->WKUPFR & PWR_WKUPFR_WKUPF1) == PWR_WKUPFR_WKUPF1) : \ + ((__FLAG__) == PWR_FLAG_WUF2) ? ((PWR->WKUPFR & PWR_WKUPFR_WKUPF2) == PWR_WKUPFR_WKUPF2) : \ + ((__FLAG__) == PWR_FLAG_WUF3) ? ((PWR->WKUPFR & PWR_WKUPFR_WKUPF3) == PWR_WKUPFR_WKUPF3) : \ + ((PWR->WKUPFR & PWR_WKUPFR_WKUPF4) == PWR_WKUPFR_WKUPF4)) + +/** @brief Clear PWR flags. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_STOPF : Stop flag. + * Indicates that the device was resumed from Stop mode. + * @arg PWR_FLAG_SBF : Standby flag. + * Indicates that the device was resumed from Standby mode. + * @arg PWR_FLAG_WUF1 : Wakeup flag 1. + * Indicates that a wakeup event was received from the WKUP line 1. + * @arg PWR_FLAG_WUF2 : Wakeup flag 2. + * Indicates that a wakeup event was received from the WKUP line 2. + * @arg PWR_FLAG_WUF3 : Wakeup flag 3. + * Indicates that a wakeup event was received from the WKUP line 3. + * @arg PWR_FLAG_WUF4 : Wakeup flag 4. + * Indicates that a wakeup event was received from the WKUP line 4. + * @arg PWR_FLAG_WUF_ALL: All Wakeup flags. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( \ + ((__FLAG__) == PWR_FLAG_STOPF) ? (SET_BIT(PWR->CSR3, PWR_CSR3_CSSF)) : \ + ((__FLAG__) == PWR_FLAG_SBF) ? (SET_BIT(PWR->CSR3, PWR_CSR3_CSSF)) : \ + ((__FLAG__) == PWR_FLAG_WUF1) ? (SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC1)) : \ + ((__FLAG__) == PWR_FLAG_WUF2) ? (SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC2)) : \ + ((__FLAG__) == PWR_FLAG_WUF3) ? (SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC3)) : \ + ((__FLAG__) == PWR_FLAG_WUF4) ? (SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC4)) : \ + (SET_BIT(PWR->WKUPCR, PWR_WKUPCR_WKUPC))) + +/** @brief Check PWR wake up flags are set or not. + * @param __FLAG__: specifies the wake up flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WKUP1 : This parameter gets Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter gets Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter gets Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter gets Wake up line 4 flag. + * @arg PWR_FLAG_WKUP : This parameter gets Wake up lines 1 to 4 flags. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1) + +/** @brief Clear CPU PWR wake up flags. + * @param __FLAG__ : Specifies the wake up flag to be cleared. + * This parameter can be one of the following values : + * @arg PWR_FLAG_WKUP1 : This parameter clears Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clears Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clears Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clears Wake up line 4 flag. + * @arg PWR_FLAG_WKUP : This parameter clears Wake up lines 1 to 4 flags. + * @retval None. + */ +#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__)) + +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do \ + { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0); + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do \ + { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Generates a Software interrupt on PVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32h7rsxx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @{ + */ +/* Peripheral Control Functions **********************************************/ +/* PVD configuration */ +void HAL_PWR_ConfigPVD(const PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + +/* WakeUp pins configuration */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes entry */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +/* Cortex System Control functions *******************************************/ +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line + * @{ + */ +#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16 connected to the PVD EXTI Line */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters + * @{ + */ +/* Check PVD level parameter */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_1) ||\ + ((LEVEL) == PWR_PVDLEVEL_2) ||\ + ((LEVEL) == PWR_PVDLEVEL_3) ||\ + ((LEVEL) == PWR_PVDLEVEL_4) ||\ + ((LEVEL) == PWR_PVDLEVEL_5) ||\ + ((LEVEL) == PWR_PVDLEVEL_6) ||\ + ((LEVEL) == PWR_PVDLEVEL_7) ||\ + ((LEVEL) == PWR_PVDLEVEL_EXT_VOL)) + +/* Check PVD mode parameter */ +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +/* Check low power regulator parameter */ +#define IS_PWR_REGULATOR(REGULATOR) ((REGULATOR) == PWR_MAINREGULATOR_ON) + +/* Check low power mode entry parameter */ +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\ + ((ENTRY) == PWR_SLEEPENTRY_WFE) ||\ + ((ENTRY) == PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR)) + +/* Check low power mode entry parameter */ +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\ + ((ENTRY) == PWR_STOPENTRY_WFE) ||\ + ((ENTRY) == PWR_STOPENTRY_WFE_NO_EVT_CLEAR)) + +/* Check voltage scale level parameter */ +#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1)) + + +/* Check wake up pin parameter */ +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN3) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN3_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN3_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7RSxx_HAL_PWR_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr_ex.h new file mode 100644 index 000000000..abf83bb03 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_pwr_ex.h @@ -0,0 +1,610 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_PWR_EX_H +#define STM32H7RSxx_HAL_PWR_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWREx Exported Types + * @{ + */ +/** + * @brief PWREx AVD configuration structure definition + */ +typedef struct +{ + uint32_t AVDLevel; /*!< Specifies the AVD detection level. + This parameter can be a value of @ref PWREx_AVD_detection_level */ + + uint32_t Mode; /*!< Specifies the EXTI operating mode for the AVD event. + This parameter can be a value of @ref PWREx_AVD_Mode. */ +} PWREx_AVDTypeDef; + +/** + * @brief PWREx Wakeup pin configuration structure definition + */ +typedef struct +{ + uint32_t WakeUpPin; /*!< Specifies the Wake-Up pin to be enabled. + This parameter can be a value of @ref PWR_WakeUp_Pins */ + + uint32_t PinPolarity; /*!< Specifies the Wake-Up pin polarity. + This parameter can be a value of @ref PWREx_PIN_Polarity */ + + uint32_t PinPull; /*!< Specifies the Wake-Up pin pull. + This parameter can be a value of @ref PWREx_PIN_Pull */ +} PWREx_WakeupPinTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ + +/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration + * @{ + */ +#define PWR_PIN_POLARITY_HIGH (0x0U) +#define PWR_PIN_POLARITY_LOW (0x1U) +/** + * @} + */ + +/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration + * @{ + */ +#define PWR_PIN_NO_PULL (0x0U) +#define PWR_PIN_PULL_UP (0x1U) +#define PWR_PIN_PULL_DOWN (0x2U) +/** + * @} + */ + +/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags. + * @{ + */ +#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ +#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PC13 */ +#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC1 */ + +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4) +/** + * @} + */ + +/** @defgroup PWREx_Supply_configuration PWREx Supply configuration + * @{ + */ +#define PWR_LDO_SUPPLY PWR_CSR2_LDOEN /*!< Core domains are supplied from the LDO */ +#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CSR2_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */ +#define PWR_DIRECT_SMPS_SUPPLY PWR_CSR2_SDEN /*!< Core domains are supplied from the SMPS only */ + +#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_BYPASS) /*!< The SMPS 1.8V output supplies external source which supplies the Core domains */ + +#define PWR_SUPPLY_CONFIG_MASK (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | \ + PWR_CSR2_SDEN | PWR_CSR2_LDOEN | PWR_CSR2_BYPASS) + +/** + * @} + */ + + +/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level + * @{ + */ +#define PWR_AVDLEVEL_1 (0x0U) /*!< Analog voltage detector level 1 : 1V7 */ +#define PWR_AVDLEVEL_2 PWR_CR1_ALS_0 /*!< Analog voltage detector level 2 : 2V1 */ +#define PWR_AVDLEVEL_3 PWR_CR1_ALS_1 /*!< Analog voltage detector level 3 : 2V5 */ +#define PWR_AVDLEVEL_4 (PWR_CR1_ALS_1 | PWR_CR1_ALS_0) /*!< Analog voltage detector level 4 : 2V8 */ + +/** + * @} + */ + +/** @defgroup PWREx_AVD_Mode PWREx AVD Mode + * @{ + */ +#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale + * @{ + */ +#define PWR_REGULATOR_STOP_VOLTAGE_SCALE3 PWR_CR1_SVOS /*!< System Stop mode voltage scaling range 3 (highest frequency) */ +#define PWR_REGULATOR_STOP_VOLTAGE_SCALE5 (0x0U) /*!< System Stop mode voltage scaling range 5 (lowest power) */ + +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x0U) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CSR2_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds + * @{ + */ +#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x0U) +#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CSR1_VBATL +#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CSR1_VBATH +/** + * @} + */ + +/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds + * @{ + */ +#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U) +#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CSR1_TEMPL +#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CSR1_TEMPH +/** + * @} + */ + +/** @defgroup PWREx_CAPACITOR_Port PWREx Capacitor Port + * @{ + */ +#define PWR_CAPACITOR_PORT1 PWR_CSR2_XSPICAP1 +#define PWR_CAPACITOR_PORT2 PWR_CSR2_XSPICAP2 +/** + * @} + */ + +/** @defgroup PWREx_CAPACITOR_Value PWREx Capacitor Value + * @{ + */ +#define PWR_CAPACITOR_OFF (0x0U) +#define PWR_CAPACITOR_ONE_THIRD_CAPACITANCE PWR_CSR2_XSPICAP1_0 +#define PWR_CAPACITOR_TWO_THIRD_CAPACITANCE PWR_CSR2_XSPICAP1_1 +#define PWR_CAPACITOR_FULL_CAPACITANCE PWR_CSR2_XSPICAP1 +/** + * @} + */ + +/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16 + * @{ + */ +#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16 connected to the AVD EXTI Line */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_PullUp_Port PWR Extended GPIO Pull-Up Port + * @{ + */ +#define PWR_GPIO_PULLUP_PORT_N (0x00U) /*!< GPIO port N */ +#define PWR_GPIO_PULLUP_PORT_O (0x01U) /*!< GPIO port O */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_PullDown_Port PWR Extended GPIO Pull-Down Port + * @{ + */ +#define PWR_GPIO_PULLDOWN_PORT_N (0x00U) /*!< GPIO port N */ +#define PWR_GPIO_PULLDOWN_PORT_O (0x01U) /*!< GPIO port O */ +#define PWR_GPIO_PULLDOWN_PORT_P (0x02U) /*!< GPIO port P */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_PullUp_Pin_Mask PWR Extended GPIO Pull-Up Pin Mask + * @{ + */ +#define PWR_GPIO_N_PULLUP_PIN_1 (0x0002U) /*!< GPIO N pin 1 */ +#define PWR_GPIO_N_PULLUP_PIN_6 (0x0040U) /*!< GPIO N pin 6 */ +#define PWR_GPIO_N_PULLUP_PIN_12 (0x1000U) /*!< GPIO N pin 12 */ + +#define PWR_GPIO_O_PULLUP_PIN_0 (0x0001U) /*!< GPIO O pin 0 */ +#define PWR_GPIO_O_PULLUP_PIN_1 (0x0002U) /*!< GPIO O pin 1 */ +#define PWR_GPIO_O_PULLUP_PIN_4 (0x0010U) /*!< GPIO O pin 4 */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO_PullDown_Pin_Mask PWR Extended GPIO Pull-Down Pin Mask + * @{ + */ +#define PWR_GPIO_N_PULLDOWN_PIN_0 (0x0001U) /*!< GPIO N pin 0 */ +#define PWR_GPIO_N_PULLDOWN_PIN_1 (0x0002U) /*!< GPIO N pin 1 */ +#define PWR_GPIO_N_PULLDOWN_PIN_2_5 (0x0004U) /*!< GPIO N pin 2 to 5 */ +#define PWR_GPIO_N_PULLDOWN_PIN_6 (0x0040U) /*!< GPIO N pin 6 */ +#define PWR_GPIO_N_PULLDOWN_PIN_8_11 (0x0100U) /*!< GPIO N pin 8 to 11 */ +#define PWR_GPIO_N_PULLDOWN_PIN_12 (0x1000U) /*!< GPIO N pin 12 */ + +#define PWR_GPIO_O_PULLDOWN_PIN_0 (0x0001U) /*!< GPIO O pin 0 */ +#define PWR_GPIO_O_PULLDOWN_PIN_1 (0x0002U) /*!< GPIO O pin 1 */ +#define PWR_GPIO_O_PULLDOWN_PIN_2 (0x0004U) /*!< GPIO O pin 2 */ +#define PWR_GPIO_O_PULLDOWN_PIN_3 (0x0008U) /*!< GPIO O pin 3 */ +#define PWR_GPIO_O_PULLDOWN_PIN_4 (0x0010U) /*!< GPIO O pin 4 */ + +#define PWR_GPIO_P_PULLDOWN_PIN_0_3 (0x0001U) /*!< GPIO P pin 0 to 3 */ +#define PWR_GPIO_P_PULLDOWN_PIN_4_7 (0x0010U) /*!< GPIO P pin 4 to 7 */ +#define PWR_GPIO_P_PULLDOWN_PIN_8_11 (0x0100U) /*!< GPIO P pin 8 to 11 */ +#define PWR_GPIO_P_PULLDOWN_PIN_12_15 (0x1000U) /*!< GPIO P pin 12 to 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Macro PWREx Exported Macro + * @{ + */ + +/** + * @brief Enable the AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD EXTI Line 16 + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Rising and Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the AVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified AVD EXTI interrupt flag is set or not. + * @retval EXTI AVD Line Status. + */ +#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL) + +/** + * @brief Clear the AVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Generates a Software interrupt on AVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @{ + */ +/* Power supply control functions */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply(uint32_t SupplySource); +uint32_t HAL_PWREx_GetSupplyConfig(void); + +/* Power voltage scaling functions */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling(uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetStopModeVoltageRange(void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @{ + */ +/* Flash low power control functions */ +void HAL_PWREx_EnableFlashPowerDown(void); +void HAL_PWREx_DisableFlashPowerDown(void); + +/* Wakeup Pins control functions */ +void HAL_PWREx_EnableWakeUpPin(const PWREx_WakeupPinTypeDef *sPinParams); +void HAL_PWREx_DisableWakeUpPin(uint32_t WakeUpPin); +uint32_t HAL_PWREx_GetWakeupFlag(uint32_t WakeUpFlag); +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag(uint32_t WakeUpFlag); + +/* Power Wakeup PIN IRQ Handler */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler(void); +void HAL_PWREx_WKUP1_Callback(void); +void HAL_PWREx_WKUP2_Callback(void); +void HAL_PWREx_WKUP3_Callback(void); +void HAL_PWREx_WKUP4_Callback(void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals Control Functions + * @{ + */ +/* Backup regulator control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); + +/* USB regulator control functions */ +void HAL_PWREx_EnableUSBReg(void); +void HAL_PWREx_DisableUSBReg(void); +HAL_StatusTypeDef HAL_PWREx_EnableUSBVoltageDetector(void); +HAL_StatusTypeDef HAL_PWREx_DisableUSBVoltageDetector(void); +void HAL_PWREx_EnableUSBHSregulator(void); +void HAL_PWREx_DisableUSBHSregulator(void); + +/* USB regulator control functions */ +void HAL_PWREx_EnableUCPDStandbyMode(void); +void HAL_PWREx_DisableUCPDStandbyMode(void); +void HAL_PWREx_EnableUCPDDeadBattery(void); +void HAL_PWREx_DisableUCPDDeadBattery(void); + +/* Battery control functions */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue); +void HAL_PWREx_DisableBatteryCharging(void); + +/* Analog Booster functions */ +void HAL_PWREx_EnableAnalogBooster(void); +void HAL_PWREx_DisableAnalogBooster(void); + +/* XSPIM_P1 functions */ +void HAL_PWREx_EnableXSPIM1(void); +void HAL_PWREx_DisableXSPIM1(void); + +/* XSPIM_P2 functions */ +void HAL_PWREx_EnableXSPIM2(void); +void HAL_PWREx_DisableXSPIM2(void); + +/* PORT capacitor control functions */ +void HAL_PWREx_ConfigXSPIPortCap(uint32_t PortCapacitor, uint32_t PortCapacitorSetting); +uint32_t HAL_PWREx_GetConfigXSPIPortCap(uint32_t PortCapacitor); + +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @{ + */ +/* Power VBAT/Temperature monitoring functions */ +void HAL_PWREx_EnableMonitoring(void); +void HAL_PWREx_DisableMonitoring(void); +uint32_t HAL_PWREx_GetTemperatureLevel(void); +uint32_t HAL_PWREx_GetVBATLevel(void); + +/* Power AVD configuration functions */ +void HAL_PWREx_ConfigAVD(const PWREx_AVDTypeDef *sConfigAVD); +void HAL_PWREx_EnableAVD(void); +void HAL_PWREx_DisableAVD(void); + +/* Power PVD/AVD IRQ Handler */ +void HAL_PWREx_PVD_AVD_IRQHandler(void); +void HAL_PWREx_PVD_AVD_Callback(void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group5 I/O Pull-Up Pull-Down Configuration Functions + * @{ + */ +/* GPIO Pull-up Pull-down configuration functions */ +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); + +/* GPIO Pull control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Macros PWREx Private Macros + * @{ + */ + +/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters + * @{ + */ +/* Check PWR regulator configuration parameter */ +#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\ + ((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY)) + +/* Check PWR regulator configuration in STOP mode parameter */ +#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_STOP_VOLTAGE_SCALE3) ||\ + ((VOLTAGE) == PWR_REGULATOR_STOP_VOLTAGE_SCALE5)) + +/* Check wake up pin polarity parameter */ +#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\ + ((POLARITY) == PWR_PIN_POLARITY_LOW)) + +/* Check wake up pin pull configuration parameter */ +#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\ + ((PULL) == PWR_PIN_PULL_UP) ||\ + ((PULL) == PWR_PIN_PULL_DOWN)) + +/* Check wake up flag parameter */ +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG3) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) + +/* Check wake up flag parameter */ +#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_1) ||\ + ((LEVEL) == PWR_AVDLEVEL_2) ||\ + ((LEVEL) == PWR_AVDLEVEL_3) ||\ + ((LEVEL) == PWR_AVDLEVEL_4)) + +/* Check AVD mode parameter */ +#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_NORMAL) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING)) + +/* Check resistor battery parameter */ +#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ + ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +/* Check the capacitor port parameter */ +#define IS_PWR_CAPACITOR(PORT) (((PORT) == PWR_CAPACITOR_PORT1) || \ + ((PORT) == PWR_CAPACITOR_PORT2)) + +/* Check the capacitor port setting parameter */ +#define IS_PWR_CAPACITOR_SETTING(SETTING) (((SETTING) == PWR_CAPACITOR_OFF) || \ + ((SETTING) == PWR_CAPACITOR_ONE_THIRD_CAPACITANCE) || \ + ((SETTING) == PWR_CAPACITOR_TWO_THIRD_CAPACITANCE) || \ + ((SETTING) == PWR_CAPACITOR_FULL_CAPACITANCE)) + +/* Check GPIO Pull-Up Port parameter */ +#define IS_PWR_GPIO_PULLPUP_PORT(GPIO_PORT) (((GPIO_PORT) == PWR_GPIO_PULLUP_PORT_N) ||\ + ((GPIO_PORT) == PWR_GPIO_PULLUP_PORT_O)) + +/* Check GPIO Pull-Down Port parameter */ +#define IS_PWR_GPIO_PULLDOWN_PORT(GPIO_PORT) (((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_N) ||\ + ((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_O) ||\ + ((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_P)) + +/* GPIO pin mask check macro */ +#define IS_PWR_GPIO_PIN_MASK(BIT_MASK) ((((BIT_MASK) & GPIO_PIN_MASK) != 0U) && ((BIT_MASK) <= GPIO_PIN_MASK)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7RSxx_HAL_PWR_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ramecc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ramecc.h new file mode 100644 index 000000000..d724bea99 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_ramecc.h @@ -0,0 +1,394 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ramecc.h + * @author MCD Application Team + * @brief Header file of RAMECC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RAMECC_H +#define STM32H7RSxx_HAL_RAMECC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup RAMECC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RAMECC_Exported_Types RAMECC Exported Types + * @brief RAMECC Exported Types + * @{ + */ + +/** + * @brief HAL RAMECC State structures definition + */ +typedef enum +{ + HAL_RAMECC_STATE_RESET = 0x00U, /*!< RAMECC not yet initialized or disabled */ + HAL_RAMECC_STATE_READY = 0x01U, /*!< RAMECC initialized and ready for use */ + HAL_RAMECC_STATE_BUSY = 0x02U, /*!< RAMECC process is ongoing */ + HAL_RAMECC_STATE_ERROR = 0x03U, /*!< RAMECC error state */ +} HAL_RAMECC_StateTypeDef; + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RAMECC Callbacks IDs Enumeration Definition + */ +typedef enum +{ + HAL_RAMECC_MSPINIT_CB_ID = 0x00U, /*!< RAMECC MSP Init Callback ID */ + HAL_RAMECC_MSPDEINIT_CB_ID = 0x01U, /*!< RAMECC MSP DeInit Callback ID */ + HAL_RAMECC_SE_DETECT_CB_ID = 0x02U, /*!< RAMECC Single Error Detect Callback ID */ + HAL_RAMECC_DE_DETECT_CB_ID = 0x03U, /*!< RAMECC Double Error Detect Callback ID */ + HAL_RAMECC_ALL_CB_ID = 0x04U, /*!< RAMECC All callback ID */ +} HAL_RAMECC_CallbackIDTypeDef; +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + +/** + * @brief RAMECC handle Structure definition + */ + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) +typedef struct __RAMECC_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_RAMECC_REGISTER_CALLBACKS) */ +{ + RAMECC_MonitorTypeDef *Instance; /*!< Register base address */ + __IO HAL_RAMECC_StateTypeDef State; /*!< RAMECC state */ + __IO uint32_t ErrorCode; /*!< RAMECC Error Code */ +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __RAMECC_HandleTypeDef *hramecc); /*!< RAMECC MSP Init Callback */ + void (* MspDeInitCallback)(struct __RAMECC_HandleTypeDef *hramecc); /*!< RAMECC MSP DeInit Callback */ + void (* DetectSingleErrorCallback)(struct __RAMECC_HandleTypeDef *hramecc); /*!< RAMECC Single Error Detect Callback */ + void (* DetectDoubleErrorCallback)(struct __RAMECC_HandleTypeDef *hramecc); /*!< RAMECC Double Error Detect Callback */ +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ +} RAMECC_HandleTypeDef; + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RAMECC_Error_Codes RAMECC Error Codes + * @{ + */ +#define HAL_RAMECC_ERROR_NONE 0x00000000U /*!< RAMECC No Error */ +#define HAL_RAMECC_ERROR_TIMEOUT 0x00000001U /*!< RAMECC Timeout Error */ +#define HAL_RAMECC_ERROR_BUSY 0x00000002U /*!< RAMECC Busy Error */ +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) +#define HAL_RAMECC_ERROR_INVALID_CALLBACK 0x00000003U /*!< Invalid Callback error */ +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RAMECC_Interrupt RAMECC interrupts + * @{ + */ +#define RAMECC_IT_GLOBAL_ID 0x10000000UL +#define RAMECC_IT_MONITOR_ID 0x20000000UL + +#define RAMECC_IT_GLOBAL_ALL_ENABLE (RAMECC_IT_GLOBAL_ID | RAMECC_IER_GIE) +#define RAMECC_IT_GLOBAL_SINGLEERR_R (RAMECC_IT_GLOBAL_ID | RAMECC_IER_GECCSEIE) +#define RAMECC_IT_GLOBAL_DOUBLEERR_R (RAMECC_IT_GLOBAL_ID | RAMECC_IER_GECCDEIE) +#define RAMECC_IT_GLOBAL_DOUBLEERR_W (RAMECC_IT_GLOBAL_ID | RAMECC_IER_GECCDEBWIE) + +#define RAMECC_IT_MONITOR_SINGLEERR_R (RAMECC_IT_MONITOR_ID | RAMECC_CR_ECCSEIE) +#define RAMECC_IT_MONITOR_DOUBLEERR_R (RAMECC_IT_MONITOR_ID | RAMECC_CR_ECCDEIE) +#define RAMECC_IT_MONITOR_DOUBLEERR_W (RAMECC_IT_MONITOR_ID | RAMECC_CR_ECCDEBWIE) +#define RAMECC_IT_MONITOR_ALL (RAMECC_IT_MONITOR_ID | RAMECC_CR_ECCDEBWIE | RAMECC_CR_ECCDEIE | RAMECC_CR_ECCSEIE) +/** + * @} + */ + +/** @defgroup RAMECC_FLAG RAMECC Monitor flags + * @{ + */ +#define RAMECC_FLAG_SINGLEERR_R RAMECC_SR_SEDCF +#define RAMECC_FLAG_DOUBLEERR_R RAMECC_SR_DEDF +#define RAMECC_FLAG_DOUBLEERR_W RAMECC_SR_DEBWDF +#define RAMECC_FLAGS_ALL (RAMECC_SR_SEDCF | RAMECC_SR_DEDF | RAMECC_SR_DEBWDF) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RAMECC_Exported_Macros RAMECC Exported Macros + * @{ + */ + +#define __HAL_RAMECC_ENABLE_GLOBAL_IT(__HANDLE__, __INTERRUPT__) ((((RAMECC_TypeDef *)((uint32_t)(__HANDLE__)->Instance & 0xFFFFFF00U))->IER) |= ((__INTERRUPT__) & ~RAMECC_IT_GLOBAL_ID)) +#define __HAL_RAMECC_ENABLE_MONITOR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= ((__INTERRUPT__) & ~RAMECC_IT_MONITOR_ID)) + +/** + * @brief Enable the specified RAMECC interrupts. + * @param __HANDLE__ : RAMECC handle. + * @param __INTERRUPT__: specifies the RAMECC interrupt sources to be enabled. + * This parameter can be one of the following values: + * @arg RAMECC_IT_GLOBAL_ALL_ENABLE : All Global ECC interrupts enable. + * @arg RAMECC_IT_GLOBAL_SINGLEERR_R : Global ECC single error interrupt enable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_R : Global ECC double error interrupt enable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_W : Global ECC double error on byte write (BW) interrupt enable. + * @arg RAMECC_IT_MONITOR_SINGLEERR_R : Monitor ECC single error interrupt enable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_R : Monitor ECC double error interrupt enable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_W : Monitor ECC double error on byte write (BW) interrupt enable. + * @arg RAMECC_IT_MONITOR_ALL : All Monitor ECC interrupts enable. + * @retval None + */ +#define __HAL_RAMECC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ( \ +(IS_RAMECC_GLOBAL_INTERRUPT(__INTERRUPT__)) ? (__HAL_RAMECC_ENABLE_GLOBAL_IT((__HANDLE__), (__INTERRUPT__))) :\ +(__HAL_RAMECC_ENABLE_MONITOR_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_RAMECC_DISABLE_GLOBAL_IT(__HANDLE__, __INTERRUPT__) ((((RAMECC_TypeDef *)((uint32_t)(__HANDLE__)->Instance & 0xFFFFFF00U))->IER) &= ~((__INTERRUPT__) & ~RAMECC_IT_GLOBAL_ID)) +#define __HAL_RAMECC_DISABLE_MONITOR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~((__INTERRUPT__) & ~RAMECC_IT_MONITOR_ID)) + +/** + * @brief Disable the specified RAMECC interrupts. + * @param __HANDLE__ : RAMECC handle. + * @param __INTERRUPT__: specifies the RAMECC interrupt sources to be disabled. + * This parameter can be one of the following values: + * @arg RAMECC_IT_GLOBAL_ALL_ENABLE : All Global ECC interrupts disable. + * @arg RAMECC_IT_GLOBAL_SINGLEERR_R : Global ECC single error interrupt disable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_R : Global ECC double error interrupt disable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_W : Global ECC double error on byte write (BW) interrupt disable. + * @arg RAMECC_IT_MONITOR_SINGLEERR_R : Monitor ECC single error interrupt disable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_R : Monitor ECC double error interrupt disable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_W : Monitor ECC double error on byte write (BW) interrupt disable. + * @arg RAMECC_IT_MONITOR_ALL : All Monitor ECC interrupts disable. + * @retval None + */ +#define __HAL_RAMECC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ( \ +(IS_RAMECC_GLOBAL_INTERRUPT(__INTERRUPT__)) ? (__HAL_RAMECC_DISABLE_GLOBAL_IT((__HANDLE__), (__INTERRUPT__))) :\ +(__HAL_RAMECC_DISABLE_MONITOR_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_RAMECC_GET_GLOBAL_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((RAMECC_TypeDef *)((uint32_t)(__HANDLE__)->Instance & 0xFFFFFF00U))->IER) & ((__INTERRUPT__) & ~RAMECC_IT_GLOBAL_ID)) ? SET : RESET) +#define __HAL_RAMECC_GET_MONITOR_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR) & ((__INTERRUPT__) & ~RAMECC_IT_MONITOR_ID)) ? SET : RESET) + +/** + * @brief Check whether the specified RAMECC interrupt source is enabled or not. + * @param __HANDLE__ : Specifies the RAMECC Handle. + * @param __INTERRUPT__ : Specifies the RAMECC interrupt source to check. + * This parameter can be one of the following values: + * @arg RAMECC_IT_GLOBAL_ALL_ENABLE : All Global ECC interrupts enable. + * @arg RAMECC_IT_GLOBAL_SINGLEERR_R : Global ECC single error interrupt enable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_R : Global ECC double error interrupt enable. + * @arg RAMECC_IT_GLOBAL_DOUBLEERR_W : Global ECC double error on byte write (BW) interrupt enable. + * @arg RAMECC_IT_MONITOR_SINGLEERR_R : Monitor ECC single error interrupt enable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_R : Monitor ECC double error interrupt enable. + * @arg RAMECC_IT_MONITOR_DOUBLEERR_W : Monitor ECC double error on byte write (BW) interrupt enable. + * @arg RAMECC_IT_MONITOR_ALL : All Monitor ECC interrupts enable. + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RAMECC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ( \ +(IS_RAMECC_GLOBAL_INTERRUPT(__INTERRUPT__)) ? (__HAL_RAMECC_GET_GLOBAL_IT_SOURCE((__HANDLE__), (__INTERRUPT__))) :\ +(__HAL_RAMECC_GET_MONITOR_IT_SOURCE((__HANDLE__), (__INTERRUPT__)))) + + +/** + * @brief Get the RAMECC pending flags. + * @param __HANDLE__ : RAMECC handle. + * @param __FLAG__ : specifies the flag to get. + * This parameter can be any combination of the following values: + * @arg RAMECC_FLAG_SINGLEERR_R : RAMECC instance ECC single error detected and corrected flag. + * @arg RAMECC_FLAG_DOUBLEERR_R : RAMECC instance ECC double error detected flag. + * @arg RAMECC_FLAG_DOUBLEERR_W : RAMECC instance ECC double error on byte write (BW) detected flag. + * @arg RAMECC_FLAGS_ALL : RAMECC instance all flag. + * @retval The state of __FLAG__ (SET or RESET). + */ +#define __HAL_RAMECC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR & (__FLAG__)) != 0U) ? 1UL : 0UL) + +/** + * @brief Clear the RAMECC pending flags. + * @param __HANDLE__ : RAMECC handle. + * @param __FLAG__ : specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RAMECC_FLAG_SINGLEERR_R : RAMECC instance ECC single error detected and corrected flag. + * @arg RAMECC_FLAG_DOUBLEERR_R : RAMECC instance ECC double error detected flag. + * @arg RAMECC_FLAG_DOUBLEERR_W : RAMECC instance ECC double error on byte write (BW) detected flag. + * @arg RAMECC_FLAGS_ALL : RAMECC instance all flag. + * @retval None. + */ +#define __HAL_RAMECC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR &= ~(__FLAG__)) + +/** + * @brief Reset the RAMECC handle state. + * @param __HANDLE__ : Specifies the RAMECC Handle. + * @retval None. + */ +#define __HAL_RAMECC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RAMECC_STATE_RESET) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RAMECC_Exported_Functions RAMECC Exported Functions + * @brief RAMECC Exported functions + * @{ + */ + +/** @defgroup RAMECC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_RAMECC_Init(RAMECC_HandleTypeDef *hramecc); +HAL_StatusTypeDef HAL_RAMECC_DeInit(RAMECC_HandleTypeDef *hramecc); +void HAL_RAMECC_MspInit(RAMECC_HandleTypeDef *hramecc); +void HAL_RAMECC_MspDeInit(RAMECC_HandleTypeDef *hramecc); +/** + * @} + */ + +/** @defgroup RAMECC_Exported_Functions_Group2 Monitoring operation functions + * @brief Monitoring operation functions + * @{ + */ +HAL_StatusTypeDef HAL_RAMECC_StartMonitor(RAMECC_HandleTypeDef *hramecc); +HAL_StatusTypeDef HAL_RAMECC_StopMonitor(RAMECC_HandleTypeDef *hramecc); +HAL_StatusTypeDef HAL_RAMECC_EnableNotification(RAMECC_HandleTypeDef *hramecc, uint32_t Notifications); +HAL_StatusTypeDef HAL_RAMECC_DisableNotification(RAMECC_HandleTypeDef *hramecc, uint32_t Notifications); +/** + * @} + */ + +/** @defgroup RAMCECC_Exported_Functions_Group3 Handle Interrupt and Callbacks functions + * @brief Handle Interrupt and Callbacks functions + * @{ + */ +void HAL_RAMECC_IRQHandler(RAMECC_HandleTypeDef *hramecc); +void HAL_RAMECC_DetectSingleErrorCallback(RAMECC_HandleTypeDef *hramecc); +void HAL_RAMECC_DetectDoubleErrorCallback(RAMECC_HandleTypeDef *hramecc); +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RAMECC_RegisterCallback(RAMECC_HandleTypeDef *hramecc, + HAL_RAMECC_CallbackIDTypeDef CallbackID, + void (* pCallback)(RAMECC_HandleTypeDef *_hramecc)); + +HAL_StatusTypeDef HAL_RAMECC_UnRegisterCallback(RAMECC_HandleTypeDef *hramecc, + HAL_RAMECC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup RAMECC_Exported_Functions_Group4 Error information functions + * @brief Error information functions + * @{ + */ +uint32_t HAL_RAMECC_GetFailingAddress(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_GetFailingDataLow(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_GetFailingDataHigh(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_GetHammingErrorCode(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_IsECCSingleErrorDetected(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_IsECCDoubleErrorDetected(const RAMECC_HandleTypeDef *hramecc); +/** + * @} + */ + +/** @defgroup RAMECC_Exported_Functions_Group5 State and Error functions + * @brief State and Error functions + * @{ + */ +HAL_RAMECC_StateTypeDef HAL_RAMECC_GetState(const RAMECC_HandleTypeDef *hramecc); +uint32_t HAL_RAMECC_GetError(const RAMECC_HandleTypeDef *hramecc); +/** + * @} + */ + +/** + * @} + */ +/* Private Constants -------------------------------------------------------------*/ +/** @defgroup RAMECC_Private_Constants RAMECC Private Constants + * @brief RAMECC private defines and constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RAMECC_Private_Macros RAMECC Private Macros + * @brief RAMECC private macros + * @{ + */ + +#define IS_RAMECC_GLOBAL_INTERRUPT(INTERRUPT) (((INTERRUPT) == RAMECC_IT_GLOBAL_ALL_ENABLE) || \ + ((INTERRUPT) == RAMECC_IT_GLOBAL_SINGLEERR_R) || \ + ((INTERRUPT) == RAMECC_IT_GLOBAL_DOUBLEERR_R) || \ + ((INTERRUPT) == RAMECC_IT_GLOBAL_DOUBLEERR_W)) + + +#define IS_RAMECC_MONITOR_INTERRUPT(INTERRUPT) (((INTERRUPT) == RAMECC_IT_MONITOR_SINGLEERR_R) || \ + ((INTERRUPT) == RAMECC_IT_MONITOR_DOUBLEERR_R) || \ + ((INTERRUPT) == RAMECC_IT_MONITOR_DOUBLEERR_W) || \ + ((INTERRUPT) == RAMECC_IT_MONITOR_ALL)) + +#define IS_RAMECC_INTERRUPT(INTERRUPT) ((IS_RAMECC_GLOBAL_INTERRUPT(INTERRUPT)) || \ + (IS_RAMECC_MONITOR_INTERRUPT(INTERRUPT))) + +/** + * @} + */ + +/** @defgroup RAMECC_FLAG RAMECC Monitor flags + * @{ + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RAMECC_Private_Functions RAMECC Private Functions + * @brief RAMECC private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_RAMECC_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc.h new file mode 100644 index 000000000..9919b4e25 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc.h @@ -0,0 +1,4818 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RCC_H +#define STM32H7RSxx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" +#include "stm32h7rsxx_ll_rcc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 420 */ + + uint32_t PLLP; /*!< Division factor for system clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 + Odd division factors (except for 1) are not allowed */ + + uint32_t PLLQ; /*!< Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLLR; /*!< Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLLS; /*!< Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ + + uint32_t PLLT; /*!< Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ + + uint32_t PLLFractional; /*!< Fractional Part of the Multiplication Factor for PLL VCO. + This parameter must be a number between 0 and 8191 */ + +} RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, CSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSIDiv; /*!< The division factor of the HSI. + This parameter can be a value of @ref RCC_HSI_Divider */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + uint32_t HSI48State; /*!< The new state of the HSI48. + This parameter can be a value of @ref RCC_HSI48_Config */ + + uint32_t CSIState; /*!< The new state of the CSI. + This parameter can be a value of @ref RCC_CSI_Config */ + + RCC_PLLInitTypeDef PLL1; /*!< Main PLL1 structure parameters */ + + RCC_PLLInitTypeDef PLL2; /*!< PLL2 structure parameters */ + + RCC_PLLInitTypeDef PLL3; /*!< PLL3 structure parameters */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t SYSCLKDivider; /*!< The system clock divider for CPU clock and all bus matrix clocks. + This parameter can be a value of @ref RCC_System_Clock_Divider */ + + uint32_t AHBCLKDivider; /*!< The AHB/AXI clock divider for HCLK. + This clock is derived from the system clock divided by the system clock divider. + This parameter can be a value of @ref RCC_HCLK_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock divider for PCLK1. + This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock divider for PCLK2. + This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB2_Clock_Source */ + + uint32_t APB4CLKDivider; /*!< The APB4 clock divider for PCLK4. + This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB4_Clock_Source */ + + uint32_t APB5CLKDivider; /*!< The APB5 clock divider for PCLK5. + This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB5_Clock_Source */ + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE selected */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI selected */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE selected */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI selected */ +#define RCC_OSCILLATORTYPE_CSI 0x00000010U /*!< CSI selected */ +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 selected */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< HSE bypass analog clock activation */ +#define RCC_HSE_BYPASS_DIGITAL (RCC_CR_HSEEXT | RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< HSE bypass digital clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< LSE bypass analog clock activation */ +#define RCC_LSE_BYPASS_DIGITAL (RCC_BDCR_LSEEXT | RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< LSE bypass digital clock activation */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation with divider 1 = 64MHz */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Calibration_Default HSI Calibration default + * @{ + */ +#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Divider HSI Divider + * @{ + */ +#define RCC_HSI_DIV1 0U /*!< HSI clock activation with divider 1 = 64MHz */ +#define RCC_HSI_DIV2 RCC_CR_HSIDIV_0 /*!< HSI clock activation with divider 2 = 32MHz */ +#define RCC_HSI_DIV4 RCC_CR_HSIDIV_1 /*!< HSI clock activation with divider 4 = 16MHz */ +#define RCC_HSI_DIV8 RCC_CR_HSIDIV /*!< HSI clock activation with divider 8 = 8MHz */ +/** + * @} + */ + +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ + +/** @defgroup RCC_CSI_Config CSI Config + * @{ + */ +#define RCC_CSI_OFF 0U /*!< CSI clock deactivation */ +#define RCC_CSI_ON RCC_CR_CSION /*!< CSI clock activation */ +/** + * @} + */ + +/** @defgroup RCC_CSI_Calibration_Default CSI Calibration default + * @{ + */ +#define RCC_CSICALIBRATION_DEFAULT 0x20U /*!< Default CSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 1U /*!< PLL deactivation */ +#define RCC_PLL_ON 2U /*!< PLL activation */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_HSI 0U /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_CSI RCC_PLLCKSELR_PLLSRC_0 /*!< CSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCKSELR_PLLSRC_1 /*!< HSE clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_NONE RCC_PLLCKSELR_PLLSRC /*!< No clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#define RCC_PLL_PCLK RCC_PLLCFGR_PLL1PEN /*!< PLL DIVP divider output enable */ +#define RCC_PLL_QCLK RCC_PLLCFGR_PLL1QEN /*!< PLL DIVQ divider output enable */ +#define RCC_PLL_RCLK RCC_PLLCFGR_PLL1REN /*!< PLL DIVR divider output enable */ +#define RCC_PLL_SCLK RCC_PLLCFGR_PLL1SEN /*!< PLL DIVS divider output enable */ +#define RCC_PLL_TCLK 0x00000200U /*!< PLL DIVT divider output enable, hardcoded because no definition in CMSIS */ +/** + * @} + */ + +/** @defgroup RCC_PLL_VCI_Range PLL VCI Range + * @{ + */ +#define RCC_PLL_VCOINPUT_RANGE0 0U /*!< Clock range frequency for PLL between 1 and 2 MHz (reset) */ +#define RCC_PLL_VCOINPUT_RANGE1 RCC_PLLCFGR_PLL1RGE_0 /*!< Clock range frequency for PLL between 2 and 4 MHz */ +#define RCC_PLL_VCOINPUT_RANGE2 RCC_PLLCFGR_PLL1RGE_1 /*!< Clock range frequency for PLL between 4 and 8 MHz */ +#define RCC_PLL_VCOINPUT_RANGE3 RCC_PLLCFGR_PLL1RGE /*!< Clock range frequency for PLL between 8 and 16 MHz */ +/** + * @} + */ + +/** @defgroup RCC_PLL_VCO_Range PLL VCO Range + * @{ + */ +#define RCC_PLL_VCO_HIGH 0U /*!< Wide PLL VCO output range between 400 and 1600 MHz (reset) */ +#define RCC_PLL_VCO_LOW RCC_PLLCFGR_PLL1VCOSEL /*!< Low PLL VCO output range between 150 and 420 MHz */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ +#define RCC_CLOCKTYPE_PCLK4 0x00000010U /*!< PCLK4 to configure */ +#define RCC_CLOCKTYPE_PCLK5 0x00000020U /*!< PCLK5 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI 0U /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_CSI RCC_CFGR_SW_0 /*!< CSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_1 /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< PLL1 selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI 0U /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_CSI RCC_CFGR_SWS_0 /*!< CSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_1 /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< PLL1 used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Divider System Clock Divider + * @{ + */ +#define RCC_SYSCLK_DIV1 0U /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CDCFGR_CPRE_3 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_0) /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_1) /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_1 | RCC_CDCFGR_CPRE_0) /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2) /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2 | RCC_CDCFGR_CPRE_0) /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2 | RCC_CDCFGR_CPRE_1) /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2 | RCC_CDCFGR_CPRE_1 | RCC_CDCFGR_CPRE_0) /*!< SYSCLK divided by 512 */ +/** + * @} + */ + + +/** @defgroup RCC_HCLK_Clock_Source HCLK Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 0U /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_BMCFGR_BMPRE_3 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_0) /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_1) /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_1 | RCC_BMCFGR_BMPRE_0) /*!< HCLK divided by 16 */ +#define RCC_HCLK_DIV64 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2) /*!< HCLK divided by 64 */ +#define RCC_HCLK_DIV128 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2 | RCC_BMCFGR_BMPRE_0) /*!< HCLK divided by 128 */ +#define RCC_HCLK_DIV256 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2 | RCC_BMCFGR_BMPRE_1) /*!< HCLK divided by 256 */ +#define RCC_HCLK_DIV512 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2 | RCC_BMCFGR_BMPRE_1 | RCC_BMCFGR_BMPRE_0) /*!< HCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source APB1 Clock Source + * @{ + */ +#define RCC_APB1_DIV1 0U /*!< APB1 not divided */ +#define RCC_APB1_DIV2 RCC_APBCFGR_PPRE1_2 /*!< APB1 divided by 2 */ +#define RCC_APB1_DIV4 (RCC_APBCFGR_PPRE1_2 | RCC_APBCFGR_PPRE1_0) /*!< APB1 divided by 4 */ +#define RCC_APB1_DIV8 (RCC_APBCFGR_PPRE1_2 | RCC_APBCFGR_PPRE1_1) /*!< APB1 divided by 8 */ +#define RCC_APB1_DIV16 RCC_APBCFGR_PPRE1 /*!< APB1 divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Source APB2 Clock Source + * @{ + */ +#define RCC_APB2_DIV1 0U /*!< APB2 not divided */ +#define RCC_APB2_DIV2 RCC_APBCFGR_PPRE2_2 /*!< APB2 divided by 2 */ +#define RCC_APB2_DIV4 (RCC_APBCFGR_PPRE2_2 | RCC_APBCFGR_PPRE2_0) /*!< APB2 divided by 4 */ +#define RCC_APB2_DIV8 (RCC_APBCFGR_PPRE2_2 | RCC_APBCFGR_PPRE2_1) /*!< APB2 divided by 8 */ +#define RCC_APB2_DIV16 RCC_APBCFGR_PPRE2 /*!< APB2 divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_APB4_Clock_Source APB4 Clock Source + * @{ + */ +#define RCC_APB4_DIV1 0U /*!< APB4 not divided */ +#define RCC_APB4_DIV2 RCC_APBCFGR_PPRE4_2 /*!< APB4 divided by 2 */ +#define RCC_APB4_DIV4 (RCC_APBCFGR_PPRE4_2 | RCC_APBCFGR_PPRE4_0) /*!< APB4 divided by 4 */ +#define RCC_APB4_DIV8 (RCC_APBCFGR_PPRE4_2 | RCC_APBCFGR_PPRE4_1) /*!< APB4 divided by 8 */ +#define RCC_APB4_DIV16 RCC_APBCFGR_PPRE4 /*!< APB4 divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_APB5_Clock_Source APB5 Clock Source + * @{ + */ +#define RCC_APB5_DIV1 0U /*!< APB5 not divided */ +#define RCC_APB5_DIV2 RCC_APBCFGR_PPRE5_2 /*!< APB5 divided by 2 */ +#define RCC_APB5_DIV4 (RCC_APBCFGR_PPRE5_2 | RCC_APBCFGR_PPRE5_0) /*!< APB5 divided by 4 */ +#define RCC_APB5_DIV8 (RCC_APBCFGR_PPRE5_2 | RCC_APBCFGR_PPRE5_1) /*!< APB5 divided by 8 */ +#define RCC_APB5_DIV16 RCC_APBCFGR_PPRE5 /*!< APB5 divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_DISABLE 0U /*!< RTC clock is disabled */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV2 ((0x02U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 2 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV3 ((0x03U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 3 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV4 ((0x04U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 4 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV5 ((0x05U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 5 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV6 ((0x06U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 6 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV7 ((0x07U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 7 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV8 ((0x08U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 8 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV9 ((0x09U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 9 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV10 ((0x0AU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 10 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV11 ((0x0BU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 11 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV12 ((0x0CU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 12 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV13 ((0x0DU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 13 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV14 ((0x0EU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 14 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV15 ((0x0FU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 15 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV16 ((0x10U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 16 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV17 ((0x11U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 17 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV18 ((0x12U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 18 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV19 ((0x13U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 19 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV20 ((0x14U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 20 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV21 ((0x15U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 21 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV22 ((0x16U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 22 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV23 ((0x17U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 23 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV24 ((0x18U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 24 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV25 ((0x19U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 25 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV26 ((0x1AU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 26 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV27 ((0x1BU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 27 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV28 ((0x1CU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 28 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV29 ((0x1DU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 29 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV30 ((0x1EU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 30 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV31 ((0x1FU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 31 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 ((0x20U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 32 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV33 ((0x21U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 33 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV34 ((0x22U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 34 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV35 ((0x23U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 35 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV36 ((0x24U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 36 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV37 ((0x25U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 37 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV38 ((0x26U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 38 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV39 ((0x27U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 39 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV40 ((0x28U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 40 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV41 ((0x29U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 41 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV42 ((0x2AU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 42 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV43 ((0x2BU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 43 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV44 ((0x2CU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 44 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV45 ((0x2DU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 45 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV46 ((0x2EU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 46 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV47 ((0x2FU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 47 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV48 ((0x30U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 48 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV49 ((0x31U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 49 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV50 ((0x32U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 50 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV51 ((0x33U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 51 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV52 ((0x34U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 52 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV53 ((0x35U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 53 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV54 ((0x36U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 54 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV55 ((0x37U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 55 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV56 ((0x38U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 56 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV57 ((0x39U << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 57 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV58 ((0x3AU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 58 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV59 ((0x3BU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 59 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV60 ((0x3CU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 60 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV61 ((0x3DU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 61 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV62 ((0x3EU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 62 used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV63 ((0x3FU << 12U) | RCC_BDCR_RTCSEL) /*!< HSE oscillator clock divided by 63 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCOx_Index MCOx Index + * @{ + */ + +/* @cond */ +/* 32 28 20 16 0 + -------------------------------- + | MCO | GPIO | GPIO | GPIO | + | Index | AF | Port | Pin | + -------------------------------*/ + +#define RCC_MCO_GPIOPORT_POS 16U +#define RCC_MCO_GPIOPORT_MASK (0xFUL << RCC_MCO_GPIOPORT_POS) +#define RCC_MCO_GPIOAF_POS 20U +#define RCC_MCO_GPIOAF_MASK (0xFFUL << RCC_MCO_GPIOAF_POS) +#define RCC_MCO_INDEX_POS 28U +#define RCC_MCO_INDEX_MASK (0x1UL << RCC_MCO_INDEX_POS) + +#define RCC_MCO1_INDEX (0x0UL << RCC_MCO_INDEX_POS) /*!< MCO1 index */ +#define RCC_MCO2_INDEX (0x1UL << RCC_MCO_INDEX_POS) /*!< MCO2 index */ +/* @endcond */ + +#define RCC_MCO1_PA8 (RCC_MCO1_INDEX |\ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8) +#define RCC_MCO1 RCC_MCO1_PA8 /*!< Alias for compatibility */ + +#define RCC_MCO2_PC9 (RCC_MCO2_INDEX |\ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOC) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_9) +#define RCC_MCO2 RCC_MCO2_PC9 /*!< Alias for compatibility */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 1 MCO*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_HSI 0U /*!< HSI clock selected as MCO1 source (reset) */ +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1SEL_0 /*!< LSE clock selected as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1SEL_1 /*!< HSE clock selected as MCO1 source */ +#define RCC_MCO1SOURCE_PLL1Q (RCC_CFGR_MCO1SEL_1 | RCC_CFGR_MCO1SEL_0) /*!< PLL1Q clock selected as MCO1 source */ +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO1SEL_2 /*!< HSI48 clock selected as MCO1 source */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_SYSCLK 0U /*!< System clock selected as MCO2 source (reset) */ +#define RCC_MCO2SOURCE_PLL2P RCC_CFGR_MCO2SEL_0 /*!< PLL2P clock selected as MCO2 source */ +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_1 /*!< HSE clock selected as MCO2 source */ +#define RCC_MCO2SOURCE_PLL1P (RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) /*!< PLL1P clock selected as MCO2 source */ +#define RCC_MCO2SOURCE_CSI RCC_CFGR_MCO2SEL_2 /*!< CSI clock selected as MCO2 source */ +#define RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_0) /*!< LSI clock selected as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler + * @{ + */ +#define RCC_MCODIV_NONE 0U /*!< No MCO prescaler (reset) */ +#define RCC_MCODIV_1 RCC_CFGR_MCO1PRE_0 /*!< MCO divided by 1 */ +#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_1 /*!< MCO divided by 2 */ +#define RCC_MCODIV_3 (RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 3 */ +#define RCC_MCODIV_4 RCC_CFGR_MCO1PRE_2 /*!< MCO divided by 4 */ +#define RCC_MCODIV_5 (RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 5 */ +#define RCC_MCODIV_6 (RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_1) /*!< MCO divided by 6 */ +#define RCC_MCODIV_7 (RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 7 */ +#define RCC_MCODIV_8 RCC_CFGR_MCO1PRE_3 /*!< MCO divided by 8 */ +#define RCC_MCODIV_9 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 9 */ +#define RCC_MCODIV_10 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_1) /*!< MCO divided by 10 */ +#define RCC_MCODIV_11 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 11 */ +#define RCC_MCODIV_12 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_2) /*!< MCO divided by 12 */ +#define RCC_MCODIV_13 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_0) /*!< MCO divided by 13 */ +#define RCC_MCODIV_14 (RCC_CFGR_MCO1PRE_3 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_1) /*!< MCO divided by 14 */ +#define RCC_MCODIV_15 RCC_CFGR_MCO1PRE /*!< MCO divided by 15 */ +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupt + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt */ +#define RCC_IT_CSIRDY RCC_CIFR_CSIRDYF /*!< CSI Ready Interrupt */ +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt */ +#define RCC_IT_PLL1RDY RCC_CIFR_PLL1RDYF /*!< PLL1 Ready Interrupt */ +#define RCC_IT_PLL2RDY RCC_CIFR_PLL2RDYF /*!< PLL2 Ready Interrupt */ +#define RCC_IT_PLL3RDY RCC_CIFR_PLL3RDYF /*!< PLL3 Ready Interrupt */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt */ +#define RCC_IT_HSECSS RCC_CIFR_HSECSSF /*!< HSE Clock Security System Interrupt (flag only) */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flag + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * - 100: RSR register + * @{ + */ +#define RCC_FLAG_HSIRDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSIDIV ((RCC_CR_REG_INDEX << 5U) | RCC_CR_HSIDIVF_Pos) /*!< HSIDIV Ready flag */ +#define RCC_FLAG_CSIRDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_CSIRDY_Pos) /*!< CSI Ready flag */ +#define RCC_FLAG_HSI48RDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ +#define RCC_FLAG_HSERDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLL1RDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_PLL1RDY_Pos) /*!< PLL1 Ready flag */ +#define RCC_FLAG_PLL2RDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_PLL2RDY_Pos) /*!< PLL2 Ready flag */ +#define RCC_FLAG_PLL3RDY ((RCC_CR_REG_INDEX << 5U) | RCC_CR_PLL3RDY_Pos) /*!< PLL3 Ready flag */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((RCC_BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((RCC_BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System failure detection flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((RCC_CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ + +/* Flags in the RSR register */ +#define RCC_FLAG_BORRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_BORRSTF_Pos) /*!< BOR reset flag */ +#define RCC_FLAG_PINRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_PORRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_PORRSTF_Pos) /*!< Power-on reset flag */ +#define RCC_FLAG_SFTRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((RCC_RSR_REG_INDEX << 5U) | RCC_RSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Config + * @{ + */ +#define RCC_LSEDRIVE_LOW 0U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** @defgroup RCC_Reset_Flag Reset Flag + * @{ + */ +#define RCC_RESET_FLAG_OBL RCC_RSR_OBLRSTF /*!< Option Byte Loader reset flag */ +#define RCC_RESET_FLAG_PIN RCC_RSR_PINRSTF /*!< PIN reset flag */ +#define RCC_RESET_FLAG_PWR RCC_RSR_BORRSTF /*!< BOR or POR/PDR reset flag */ +#define RCC_RESET_FLAG_SW RCC_RSR_SFTRSTF /*!< Software Reset flag */ +#define RCC_RESET_FLAG_IWDG RCC_RSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define RCC_RESET_FLAG_WWDG RCC_RSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define RCC_RESET_FLAG_LPWR RCC_RSR_LPWRRSTF /*!< Low power reset flag */ +#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ + RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ + RCC_RESET_FLAG_LPWR) +/** + * @} + */ + +/** @defgroup RCC_Stop_WakeUpClock Stop WakeUp Clock + * @{ + */ +#define RCC_STOP_WAKEUPCLOCK_HSI 0U /*!< HSI selected as wake up system clock from system Stop (default after reset) */ +#define RCC_STOP_WAKEUPCLOCK_CSI RCC_CFGR_STOPWUCK /*!< CSI selected as wake up system clock from system Stop */ +/** + * @} + */ + +/** @defgroup RCC_Stop_KernelWakeUpClock Stop Kernel WakeUp Clock + * @{ + */ +#define RCC_STOP_KERWAKEUPCLOCK_HSI 0U /*!< HSI selected as wake up kernel clock from system Stop (default after reset) */ +#define RCC_STOP_KERWAKEUPCLOCK_CSI RCC_CFGR_STOPKERWUCK /*!< CSI selected as wake up kernel clock from system Stop */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AXI_Clock_Gating_Enable_Disable AXI Interconnect, Master and Slave Clock Gating Enable Disable + * @brief Enable or disable the clock gating. + * @note The dynamic power consumption can be optimized by enabling the functional clock gating. + * After reset, the clock gating is enabled (except for JTAG if a JTAG connection has been detected). + * @{ + */ + +#define __HAL_RCC_AXI_INTERCONNECT_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AXICKG) + +#define __HAL_RCC_AXI_MASTER_AHB_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AHBCKG) + +#define __HAL_RCC_AXI_MASTER_SDMMC1_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_SDMMCCKG) + +#define __HAL_RCC_AXI_MASTER_HPDMA1_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_HPDMA1CKG) + +#define __HAL_RCC_AXI_MASTER_CPU_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_CPUCKG) + +#define __HAL_RCC_AXI_MASTER_GPU2D_0_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DS0CKG) + +#define __HAL_RCC_AXI_MASTER_GPU2D_1_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DS1CKG) + +#define __HAL_RCC_AXI_MASTER_GPU2D_CACHE_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DCKG) + +#define __HAL_RCC_AXI_MASTER_DCMIPP_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_DCMIPPCKG) + +#define __HAL_RCC_AXI_MASTER_DMA2D_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_DMA2DCKG) + +#define __HAL_RCC_AXI_MASTER_LTDC_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_LTDCCKG) + +#define __HAL_RCC_AXI_MASTER_GFXMMU_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_GFXMMUMCKG) + +#define __HAL_RCC_AXI_SLAVE_GFXMMU_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_GFXMMUSCKG) + +#define __HAL_RCC_AXI_SLAVE_AHB_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AHBSCKG) + +#define __HAL_RCC_AXI_SLAVE_FMC_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_FMCCKG) + +#define __HAL_RCC_AXI_SLAVE_XSPI1_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_XSPI1CKG) + +#define __HAL_RCC_AXI_SLAVE_XSPI2_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_XSPI2CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM0_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM0CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM1_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM1CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM2_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM2CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM3_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM3CKG) + +#define __HAL_RCC_AXI_SLAVE_FLASH_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_FLIFTCKG) + +#define __HAL_RCC_AXI_SLAVE_EXTI_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_EXTICKG) + +#define __HAL_RCC_AXI_SLAVE_JTAG_CLK_GATING_ENABLE() CLEAR_BIT(RCC->CKGDISR, RCC_CKGDISR_JTAGCKG) + + +#define __HAL_RCC_AXI_INTERCONNECT_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AXICKG) + +#define __HAL_RCC_AXI_MASTER_AHB_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AHBCKG) + +#define __HAL_RCC_AXI_MASTER_SDMMC1_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_SDMMCCKG) + +#define __HAL_RCC_AXI_MASTER_HPDMA1_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_HPDMA1CKG) + +#define __HAL_RCC_AXI_MASTER_CPU_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_CPUCKG) + +#define __HAL_RCC_AXI_MASTER_GPU_0_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DS0CKG) + +#define __HAL_RCC_AXI_MASTER_GPU_1_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DS1CKG) + +#define __HAL_RCC_AXI_MASTER_GPU_CACHE_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_GPU2DCKG) + +#define __HAL_RCC_AXI_MASTER_DCMIPP_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_DCMIPPCKG) + +#define __HAL_RCC_AXI_MASTER_DMA2D_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_DMA2DCKG) + +#define __HAL_RCC_AXI_MASTER_LTDC_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_LTDCCKG) + +#define __HAL_RCC_AXI_MASTER_GFXMMU_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_GFXMMUMCKG) + +#define __HAL_RCC_AXI_SLAVE_GFXMMU_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_GFXMMUSCKG) + +#define __HAL_RCC_AXI_SLAVE_AHB_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AHBSCKG) + +#define __HAL_RCC_AXI_SLAVE_FMC_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_FMCCKG) + +#define __HAL_RCC_AXI_SLAVE_XSPI1_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_XSPI1CKG) + +#define __HAL_RCC_AXI_SLAVE_XSPI2_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_XSPI2CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM0_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM0CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM1_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM1CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM2_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM2CKG) + +#define __HAL_RCC_AXI_SLAVE_SRAM3_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_AXISRAM3CKG) + +#define __HAL_RCC_AXI_SLAVE_FLASH_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_FLIFTCKG) + +#define __HAL_RCC_AXI_SLAVE_EXTI_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_EXTICKG) + +#define __HAL_RCC_AXI_SLAVE_JTAG_CLK_GATING_DISABLE() SET_BIT(RCC->CKGDISR, RCC_CKGDISR_JTAGCKG) + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPDMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPDMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGFSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USBPHYC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USBPHYCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ADF1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADF1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB1ENR);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_GPDMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPDMA1EN) + +#define __HAL_RCC_ADC12_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN) + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN) + +#define __HAL_RCC_ETH1TX_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN) + +#define __HAL_RCC_ETH1RX_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGFSEN) + +#define __HAL_RCC_USBPHYC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USBPHYCEN) + +#define __HAL_RCC_ADF1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADF1EN) + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_PSSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PSSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CORDIC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_PSSI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PSSIEN) + +#define __HAL_RCC_SDMMC2_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) + +#define __HAL_RCC_CORDIC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN) + +#define __HAL_RCC_SRAM1_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM1EN) + +#define __HAL_RCC_SRAM2_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM2EN) + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Peripheral_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB3ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB3ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB3ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SAESEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB3ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_PKAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB3ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* PKA */ + +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_RNGEN) + +#define __HAL_RCC_HASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_HASHEN) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_CRYPEN) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SAESEN) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_PKAEN) +#endif /* PKA */ + +/** + * @} + */ + +/** @defgroup RCC_AHB4_Peripheral_Clock_Enable_Disable AHB4 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPION_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIONEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN) + +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN) + +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN) + +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN) + +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN) + +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN) + +#define __HAL_RCC_GPIOG_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN) + +#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN) + +#define __HAL_RCC_GPIOM_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOMEN) + +#define __HAL_RCC_GPION_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIONEN) + +#define __HAL_RCC_GPIOO_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOOEN) + +#define __HAL_RCC_GPIOP_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOPEN) + +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN) + +#define __HAL_RCC_BKPRAM_CLK_DISABLE() CLEAR_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB5_Peripheral_Clock_Enable_Disable AHB5 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB5 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_HPDMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_HPDMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_JPEGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_XSPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_XSPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_XSPIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GFXMMUEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GPU2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->AHB5ENR);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPU2D */ + +#define __HAL_RCC_HPDMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_HPDMA1EN) + +#define __HAL_RCC_DMA2D_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_DMA2DEN) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_JPEGEN) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_FMCEN) + +#define __HAL_RCC_XSPI1_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI1EN) + +#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_SDMMC1EN) + +#define __HAL_RCC_XSPI2_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI2EN) + +#define __HAL_RCC_XSPIM_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPIMEN) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GFXMMUEN) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_CLK_DISABLE() CLEAR_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GPU2DEN) +#endif /* GPU2D */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I3C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UCPD1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_UCPD1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB1ENR1);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) + +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) + +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) + +#define __HAL_RCC_TIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) + +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) + +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) + +#define __HAL_RCC_TIM12_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM12EN) + +#define __HAL_RCC_TIM13_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM13EN) + +#define __HAL_RCC_TIM14_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM14EN) + +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) + +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) + +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) + +#define __HAL_RCC_SPDIFRX_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPDIFRXEN) + +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) + +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) + +#define __HAL_RCC_UART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) + +#define __HAL_RCC_UART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) + +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN) + +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) + +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) + +#define __HAL_RCC_I3C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN) + +#define __HAL_RCC_CEC_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CECEN) + +#define __HAL_RCC_UART7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART7EN) + +#define __HAL_RCC_UART8_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART8EN) + +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_CRSEN) + +#define __HAL_RCC_MDIOS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_MDIOSEN) + +#define __HAL_RCC_FDCAN_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_FDCANEN) + +#define __HAL_RCC_UCPD1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_UCPD1EN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB2ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) + +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) + +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) + +#define __HAL_RCC_SPI4_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN) + +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) + +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) + +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) + +#define __HAL_RCC_TIM9_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN) + +#define __HAL_RCC_SPI5_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN) + +#define __HAL_RCC_SAI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) + +#define __HAL_RCC_SAI2_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) + +/** + * @} + */ + +/** @defgroup RCC_APB4_Peripheral_Clock_Enable_Disable APB4 Peripheral Clock Enable Disable + * @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SBS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SBSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DTS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB4ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SBS_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_SBSEN) + +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN) + +#define __HAL_RCC_SPI6_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN) + +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN) + +#define __HAL_RCC_LPTIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN) + +#define __HAL_RCC_LPTIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN) + +#define __HAL_RCC_LPTIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN) + +#define __HAL_RCC_VREF_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN) + +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN) + +#define __HAL_RCC_DTS_CLK_DISABLE() CLEAR_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN) + +/** + * @} + */ + +/** @defgroup RCC_APB5_Peripheral_Clock_Enable_Disable APB5 Peripheral Clock Enable Disable + * @brief Enable or disable the APB5 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB5ENR, RCC_APB5ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DCMIPP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB5ENR, RCC_APB5ENR_DCMIPPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GFXTIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB5ENR, RCC_APB5ENR_GFXTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_REG(RCC->APB5ENR);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LTDC_CLK_DISABLE() CLEAR_BIT(RCC->APB5ENR, RCC_APB5ENR_LTDCEN) + +#define __HAL_RCC_DCMIPP_CLK_DISABLE() CLEAR_BIT(RCC->APB5ENR, RCC_APB5ENR_DCMIPPEN) + +#define __HAL_RCC_GFXTIM_CLK_DISABLE() CLEAR_BIT(RCC->APB5ENR, RCC_APB5ENR_GFXTIMEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPDMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPDMA1EN) != 0U) + +#define __HAL_RCC_ADC12_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN) != 0U) + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN) != 0U) + +#define __HAL_RCC_ETH1TX_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN) != 0U) + +#define __HAL_RCC_ETH1RX_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN) != 0U) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN) != 0U) + +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGFSEN) != 0U) + +#define __HAL_RCC_USBPHYC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USBPHYCEN) != 0U) + +#define __HAL_RCC_ADF1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADF1EN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_PSSI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PSSIEN) != 0U) + +#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) != 0U) + +#define __HAL_RCC_CORDIC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN) != 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM1EN) != 0U) + +#define __HAL_RCC_SRAM2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SRAM2EN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_RNGEN) != 0U) + +#define __HAL_RCC_HASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_HASHEN) != 0U) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_CRYPEN) != 0U) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SAESEN) != 0U) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_PKAEN) != 0U) +#endif /* PKA */ + +/** + * @} + */ + +/** @defgroup RCC_AHB4_Clock_Enable_Disable_Status AHB4 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB4 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN) != 0U) + +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN) != 0U) + +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN) != 0U) + +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN) != 0U) + +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN) != 0U) + +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN) != 0U) + +#define __HAL_RCC_GPIOM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOMEN) != 0U) + +#define __HAL_RCC_GPION_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIONEN) != 0U) + +#define __HAL_RCC_GPIOO_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOOEN) != 0U) + +#define __HAL_RCC_GPIOP_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOPEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN) != 0U) + +#define __HAL_RCC_BKPRAM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB5_Clock_Enable_Disable_Status AHB5 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB5 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_HPDMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_HPDMA1EN) != 0U) + +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_DMA2DEN) != 0U) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_JPEGEN) != 0U) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_FMCEN) != 0U) + +#define __HAL_RCC_XSPI1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI1EN) != 0U) + +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_SDMMC1EN) != 0U) + +#define __HAL_RCC_XSPI2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPI2EN) != 0U) + +#define __HAL_RCC_XSPIM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_XSPIMEN) != 0U) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GFXMMUEN) != 0U) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_IS_CLK_ENABLED() (READ_BIT(RCC->AHB5ENR, RCC_AHB5ENR_GPU2DEN) != 0U) +#endif /* GPU2D */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) != 0U) + +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) != 0U) + +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) != 0U) + +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) != 0U) + +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) != 0U) + +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) != 0U) + +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM12EN) != 0U) + +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM13EN) != 0U) + +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM14EN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) != 0U) + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) != 0U) + +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) != 0U) + +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) != 0U) + +#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPDIFRXEN) != 0U) + +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) != 0U) + +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) != 0U) + +#define __HAL_RCC_UART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) != 0U) + +#define __HAL_RCC_UART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) != 0U) + +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN) != 0U) + +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) != 0U) + +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) != 0U) + +#define __HAL_RCC_I3C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1_I3C1EN) != 0U) + +#define __HAL_RCC_CEC_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CECEN) != 0U) + +#define __HAL_RCC_UART7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART7EN) != 0U) + +#define __HAL_RCC_UART8_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART8EN) != 0U) + +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_CRSEN) != 0U) + +#define __HAL_RCC_MDIOS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_MDIOSEN) != 0U) + +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_FDCANEN) != 0U) + +#define __HAL_RCC_UCPD1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_UCPD1EN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) != 0U) + +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != 0U) + +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) != 0U) + +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) != 0U) + +#define __HAL_RCC_TIM9_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN) != 0U) + +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN) != 0U) + +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) != 0U) + +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB4_Clock_Enable_Disable_Status APB4 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB4 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SBS_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SBSEN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN) != 0U) + +#define __HAL_RCC_SPI6_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN) != 0U) + +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN) != 0U) + +#define __HAL_RCC_LPTIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN) != 0U) + +#define __HAL_RCC_LPTIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN) != 0U) + +#define __HAL_RCC_LPTIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN) != 0U) + +#define __HAL_RCC_VREF_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN) != 0U) + +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN) != 0U) + +#define __HAL_RCC_DTS_IS_CLK_ENABLED() (READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB5_Clock_Enable_Disable_Status APB5 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB5 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() (READ_BIT(RCC->APB5ENR, RCC_APB5ENR_LTDCEN) != 0U) + +#define __HAL_RCC_DCMIPP_IS_CLK_ENABLED() (READ_BIT(RCC->APB5ENR, RCC_APB5ENR_DCMIPPEN) != 0U) + +#define __HAL_RCC_GFXTIM_IS_CLK_ENABLED() (READ_BIT(RCC->APB5ENR, RCC_APB5ENR_GFXTIMEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ + +#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x8E008030UL) +#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0UL) + +#define __HAL_RCC_GPDMA1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GPDMA1RST) +#define __HAL_RCC_GPDMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GPDMA1RST) + +#define __HAL_RCC_ADC12_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ADC12RST) +#define __HAL_RCC_ADC12_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ADC12RST) + +#if defined(ETH) +#define __HAL_RCC_ETH1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ETH1RST) +#define __HAL_RCC_ETH1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ETH1RST) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_OTGHSRST) +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_OTGHSRST) + +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_OTGFSRST) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_OTGFSRST) + +#define __HAL_RCC_USBPHYC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_USBPHYCRST) +#define __HAL_RCC_USBPHYC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_USBPHYCRST) + +#define __HAL_RCC_ADF1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ADF1RST) +#define __HAL_RCC_ADF1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_ADF1RST) + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ + +#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00004202UL) +#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0UL) + +#define __HAL_RCC_PSSI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PSSIRST) +#define __HAL_RCC_PSSI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PSSIRST) + +#define __HAL_RCC_SDMMC2_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) +#define __HAL_RCC_SDMMC2_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) + +#define __HAL_RCC_CORDIC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_CORDICRST) +#define __HAL_RCC_CORDIC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_CORDICRST) + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ + +#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000057UL) +#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0UL) + +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_RNGRST) +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_RNGRST) + +#define __HAL_RCC_HASH_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_HASHRST) +#define __HAL_RCC_HASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_HASHRST) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_CRYPRST) +#define __HAL_RCC_CRYP_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_CRYPRST) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_SAESRST) +#define __HAL_RCC_SAES_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_SAESRST) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_PKARST) +#define __HAL_RCC_PKA_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_PKARST) +#endif /* PKA */ + +/** + * @} + */ + +/** @defgroup RCC_AHB4_Force_Release_Reset AHB4 Peripheral Force Release Reset + * @brief Force or release AHB4 peripheral reset. + * @{ + */ + +#define __HAL_RCC_AHB4_FORCE_RESET() WRITE_REG(RCC->AHB4RSTR, 0x0008B0FFUL) +#define __HAL_RCC_AHB4_RELEASE_RESET() WRITE_REG(RCC->AHB4RSTR, 0UL) + +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOARST) +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOARST) + +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOBRST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOBRST) + +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOCRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOCRST) + +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIODRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIODRST) + +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOERST) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOERST) + +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOFRST) +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOFRST) + +#define __HAL_RCC_GPIOG_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOGRST) +#define __HAL_RCC_GPIOG_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOGRST) + +#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOHRST) +#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOHRST) + +#define __HAL_RCC_GPIOM_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOMRST) +#define __HAL_RCC_GPIOM_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOMRST) + +#define __HAL_RCC_GPION_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIONRST) +#define __HAL_RCC_GPION_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIONRST) + +#define __HAL_RCC_GPIOO_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOORST) +#define __HAL_RCC_GPIOO_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOORST) + +#define __HAL_RCC_GPIOP_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOPRST) +#define __HAL_RCC_GPIOP_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_GPIOPRST) + +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_CRCRST) +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHB4RSTR, RCC_AHB4RSTR_CRCRST) + +/** + * @} + */ + +/** @defgroup RCC_AHB5_Force_Release_Reset AHB5 Peripheral Force Release Reset + * @brief Force or release AHB5 peripheral reset. + * @{ + */ + +#define __HAL_RCC_AHB5_FORCE_RESET() WRITE_REG(RCC->AHB5RSTR, 0x0018513BUL) +#define __HAL_RCC_AHB5_RELEASE_RESET() WRITE_REG(RCC->AHB5RSTR, 0UL) + +#define __HAL_RCC_HPDMA1_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_HPDMA1RST) +#define __HAL_RCC_HPDMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_HPDMA1RST) + +#define __HAL_RCC_DMA2D_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_DMA2DRST) +#define __HAL_RCC_DMA2D_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_DMA2DRST) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_JPEGRST) +#define __HAL_RCC_JPEG_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_JPEGRST) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_FMCRST) +#define __HAL_RCC_FMC_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_FMCRST) + +#define __HAL_RCC_XSPI1_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPI1RST) +#define __HAL_RCC_XSPI1_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPI1RST) + +#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_SDMMC1RST) + +#define __HAL_RCC_XSPI2_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPI2RST) +#define __HAL_RCC_XSPI2_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPI2RST) + +#define __HAL_RCC_XSPIM_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPIMRST) +#define __HAL_RCC_XSPIM_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_XSPIMRST) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_GFXMMURST) +#define __HAL_RCC_GFXMMU_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_GFXMMURST) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_FORCE_RESET() SET_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_GPU2DRST) +#define __HAL_RCC_GPU2D_RELEASE_RESET() CLEAR_BIT(RCC->AHB5RSTR, RCC_AHB5RSTR_GPU2DRST) +#endif /* GPU2D */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB1_FORCE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0xC8FFC3FFUL); \ + WRITE_REG(RCC->APB1RSTR2, 0x08000122UL); \ + } while(0) +#define __HAL_RCC_APB1_RELEASE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0UL); \ + WRITE_REG(RCC->APB1RSTR2, 0UL); \ + } while(0) + +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) + +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) + +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) + +#define __HAL_RCC_TIM5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) +#define __HAL_RCC_TIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) + +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) + +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) + +#define __HAL_RCC_TIM12_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM12RST) +#define __HAL_RCC_TIM12_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM12RST) + +#define __HAL_RCC_TIM13_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM13RST) +#define __HAL_RCC_TIM13_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM13RST) + +#define __HAL_RCC_TIM14_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM14RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM14RST) + +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) + +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) + +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) + +#define __HAL_RCC_SPDIFRX_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPDIFRXRST) +#define __HAL_RCC_SPDIFRX_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPDIFRXRST) + +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) + +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) + +#define __HAL_RCC_UART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) +#define __HAL_RCC_UART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) + +#define __HAL_RCC_UART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) +#define __HAL_RCC_UART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) + +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1_I3C1RST) +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1_I3C1RST) + +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) + +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) + +#define __HAL_RCC_I3C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1_I3C1RST) +#define __HAL_RCC_I3C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1_I3C1RST) + +#define __HAL_RCC_CEC_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CECRST) +#define __HAL_RCC_CEC_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CECRST) + +#define __HAL_RCC_UART7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART7RST) +#define __HAL_RCC_UART7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART7RST) + +#define __HAL_RCC_UART8_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART8RST) +#define __HAL_RCC_UART8_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART8RST) + +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_CRSRST) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_CRSRST) + +#define __HAL_RCC_MDIOS_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_MDIOSRST) +#define __HAL_RCC_MDIOS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_MDIOSRST) + +#define __HAL_RCC_FDCAN_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_FDCANRST) +#define __HAL_RCC_FDCAN_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_FDCANRST) + +#define __HAL_RCC_UCPD1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_UCPD1RST) +#define __HAL_RCC_UCPD1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_UCPD1RST) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xC8FFC3FFUL) +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0UL) + +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) + +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) + +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) + +#define __HAL_RCC_SPI4_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI4RST) +#define __HAL_RCC_SPI4_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI4RST) + +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) + +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) + +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) + +#define __HAL_RCC_TIM9_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM9RST) +#define __HAL_RCC_TIM9_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM9RST) + +#define __HAL_RCC_SPI5_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI5RST) +#define __HAL_RCC_SPI5_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI5RST) + +#define __HAL_RCC_SAI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) +#define __HAL_RCC_SAI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) + +#define __HAL_RCC_SAI2_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) +#define __HAL_RCC_SAI2_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) + +/** + * @} + */ + +/** @defgroup RCC_APB4_Force_Release_Reset APB4 Peripheral Force Release Reset + * @brief Force or release APB4 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB4_FORCE_RESET() WRITE_REG(RCC->APB4RSTR, 0x04009E2AUL) +#define __HAL_RCC_APB4_RELEASE_RESET() WRITE_REG(RCC->APB4RSTR, 0UL) + +#define __HAL_RCC_SBS_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_SBSRST) +#define __HAL_RCC_SBS_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_SBSRST) + +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPUART1RST) +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPUART1RST) + +#define __HAL_RCC_SPI6_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_SPI6RST) +#define __HAL_RCC_SPI6_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_SPI6RST) + +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM2RST) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM2RST) + +#define __HAL_RCC_LPTIM3_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM3RST) +#define __HAL_RCC_LPTIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM3RST) + +#define __HAL_RCC_LPTIM4_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM4RST) +#define __HAL_RCC_LPTIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM4RST) + +#define __HAL_RCC_LPTIM5_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM5RST) +#define __HAL_RCC_LPTIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_LPTIM5RST) + +#define __HAL_RCC_VREF_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_VREFRST) +#define __HAL_RCC_VREF_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_VREFRST) + +#define __HAL_RCC_DTS_FORCE_RESET() SET_BIT(RCC->APB4RSTR, RCC_APB4RSTR_DTSRST) +#define __HAL_RCC_DTS_RELEASE_RESET() CLEAR_BIT(RCC->APB4RSTR, RCC_APB4RSTR_DTSRST) + +/** + * @} + */ + +/** @defgroup RCC_APB5_Force_Release_Reset APB5 Peripheral Force Release Reset + * @brief Force or release APB5 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB5_FORCE_RESET() WRITE_REG(RCC->APB5RSTR, 0x00000016UL) +#define __HAL_RCC_APB5_RELEASE_RESET() WRITE_REG(RCC->APB5RSTR, 0UL) + +#define __HAL_RCC_LTDC_FORCE_RESET() SET_BIT(RCC->APB5RSTR, RCC_APB5RSTR_LTDCRST) +#define __HAL_RCC_LTDC_RELEASE_RESET() CLEAR_BIT(RCC->APB5RSTR, RCC_APB5RSTR_LTDCRST) + +#define __HAL_RCC_DCMIPP_FORCE_RESET() SET_BIT(RCC->APB5RSTR, RCC_APB5RSTR_DCMIPPRST) +#define __HAL_RCC_DCMIPP_RELEASE_RESET() CLEAR_BIT(RCC->APB5RSTR, RCC_APB5RSTR_DCMIPPRST) + +#define __HAL_RCC_GFXTIM_FORCE_RESET() SET_BIT(RCC->APB5RSTR, RCC_APB5RSTR_GFXTIMRST) +#define __HAL_RCC_GFXTIM_RELEASE_RESET() CLEAR_BIT(RCC->APB5RSTR, RCC_APB5RSTR_GFXTIMRST) + +/** + * @} + */ + + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPDMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_GPDMA1LPEN) + +#define __HAL_RCC_ADC12_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADC12LPEN) +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1MACLPEN) + +#define __HAL_RCC_ETH1TX_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1TXLPEN) + +#define __HAL_RCC_ETH1RX_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1RXLPEN) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGHSLPEN) + +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGFSLPEN) + +#define __HAL_RCC_USBPHYC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_USBPHYCLPEN) + +#define __HAL_RCC_ADF1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADF1LPEN) + + +#define __HAL_RCC_GPDMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_GPDMA1LPEN) + +#define __HAL_RCC_ADC12_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADC12LPEN) + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1MACLPEN) + +#define __HAL_RCC_ETH1TX_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1TXLPEN) + +#define __HAL_RCC_ETH1RX_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1RXLPEN) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGHSLPEN) + +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGFSLPEN) + +#define __HAL_RCC_USBPHYC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_USBPHYCLPEN) + +#define __HAL_RCC_ADF1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADF1LPEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_PSSI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_PSSILPEN) + +#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SDMMC2LPEN) + +#define __HAL_RCC_CORDIC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_CORDICLPEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM1LPEN) + +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM2LPEN) + + +#define __HAL_RCC_PSSI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_PSSILPEN) + +#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SDMMC2LPEN) + +#define __HAL_RCC_CORDIC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_CORDICLPEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM1LPEN) + +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM2LPEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_RNGLPEN) + +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_HASHLPEN) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_CRYPLPEN) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_SAESLPEN) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_PKALPEN) +#endif /* PKA */ + + +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_RNGLPEN) + +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_HASHLPEN) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_CRYPLPEN) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_SAESLPEN) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_PKALPEN) +#endif /* PKA */ + +/** + * @} + */ + +/** @defgroup RCC_AHB4_Clock_Sleep_Enable_Disable AHB4 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOALPEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOBLPEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOCLPEN) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIODLPEN) + +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOELPEN) + +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOFLPEN) + +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOGLPEN) + +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOHLPEN) + +#define __HAL_RCC_GPIOM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOMLPEN) + +#define __HAL_RCC_GPION_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIONLPEN) + +#define __HAL_RCC_GPIOO_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOOLPEN) + +#define __HAL_RCC_GPIOP_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOPLPEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_CRCLPEN) + +#define __HAL_RCC_BKPRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_BKPRAMLPEN) + + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOALPEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOBLPEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOCLPEN) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIODLPEN) + +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOELPEN) + +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOFLPEN) + +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOGLPEN) + +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOHLPEN) + +#define __HAL_RCC_GPIOM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOMLPEN) + +#define __HAL_RCC_GPION_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIONLPEN) + +#define __HAL_RCC_GPIOO_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOOLPEN) + +#define __HAL_RCC_GPIOP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOPLPEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_CRCLPEN) + +#define __HAL_RCC_BKPRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_BKPRAMLPEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB5_Clock_Sleep_Enable_Disable AHB5 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_HPDMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_HPDMA1LPEN) + +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DMA2DLPEN) + +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FLASHLPEN) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_JPEGLPEN) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FMCLPEN) + +#define __HAL_RCC_XSPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI1LPEN) + +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_SDMMC1LPEN) + +#define __HAL_RCC_XSPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI2LPEN) + +#define __HAL_RCC_XSPIM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPIMLPEN) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GFXMMULPEN) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GPU2DLPEN) +#endif /* GPU2D */ + +#define __HAL_RCC_DTCM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM1LPEN) + +#define __HAL_RCC_DTCM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM2LPEN) + +#define __HAL_RCC_ITCM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_ITCMLPEN) + +#define __HAL_RCC_AXISRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_AXISRAMLPEN) + + +#define __HAL_RCC_HPDMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_HPDMA1LPEN) + +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DMA2DLPEN) + +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FLASHLPEN) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_JPEGLPEN) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FMCLPEN) + +#define __HAL_RCC_XSPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI1LPEN) + +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_SDMMC1LPEN) + +#define __HAL_RCC_XSPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI2LPEN) + +#define __HAL_RCC_XSPIM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPIMLPEN) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GFXMMULPEN) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GPU2DLPEN) +#endif /* GPU2D */ + +#define __HAL_RCC_DTCM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM1LPEN) + +#define __HAL_RCC_DTCM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM2LPEN) + +#define __HAL_RCC_ITCM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_ITCMLPEN) + +#define __HAL_RCC_AXISRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_AXISRAMLPEN) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM2LPEN) + +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM3LPEN) + +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM4LPEN) + +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM5LPEN) + +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM6LPEN) + +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM7LPEN) + +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM12LPEN) + +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM13LPEN) + +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM14LPEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_LPTIM1LPEN) + +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_WWDGLPEN) + +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI2LPEN) + +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI3LPEN) + +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPDIFRXLPEN) + +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART2LPEN) + +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART3LPEN) + +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART4LPEN) + +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART5LPEN) + +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) + +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C2LPEN) + +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C3LPEN) + +#define __HAL_RCC_I3C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) + +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_CECLPEN) + +#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART7LPEN) + +#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART8LPEN) + +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_CRSLPEN) + +#define __HAL_RCC_MDIOS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_MDIOSLPEN) + +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_FDCANLPEN) + +#define __HAL_RCC_UCPD1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_UCPD1LPEN) + + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM2LPEN) + +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM3LPEN) + +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM4LPEN) + +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM5LPEN) + +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM6LPEN) + +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM7LPEN) + +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM12LPEN) + +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM13LPEN) + +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM14LPEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_LPTIM1LPEN) + +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_WWDGLPEN) + +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI2LPEN) + +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI3LPEN) + +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPDIFRXLPEN) + +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART2LPEN) + +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART3LPEN) + +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART4LPEN) + +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART5LPEN) + +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) + +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C2LPEN) + +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C3LPEN) + +#define __HAL_RCC_I3C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) + +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_CECLPEN) + +#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART7LPEN) + +#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART8LPEN) + +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_CRSLPEN) + +#define __HAL_RCC_MDIOS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_MDIOSLPEN) + +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_FDCANLPEN) + +#define __HAL_RCC_UCPD1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_UCPD1LPEN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM1LPEN) + +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_USART1LPEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI1LPEN) + +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI4LPEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM15LPEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM16LPEN) + +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM17LPEN) + +#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM9LPEN) + +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI5LPEN) + +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI1LPEN) + +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI2LPEN) + + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM1LPEN) + +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_USART1LPEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI1LPEN) + +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI4LPEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM15LPEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM16LPEN) + +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM17LPEN) + +#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM9LPEN) + +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI5LPEN) + +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI1LPEN) + +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI2LPEN) + +/** + * @} + */ + +/** @defgroup RCC_APB4_Clock_Sleep_Enable_Disable APB4 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SBS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SBSLPEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPUART1LPEN) + +#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SPI6LPEN) + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM2LPEN) + +#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM3LPEN) + +#define __HAL_RCC_LPTIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM4LPEN) + +#define __HAL_RCC_LPTIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM5LPEN) + +#define __HAL_RCC_VREF_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_VREFLPEN) + +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_RTCAPBLPEN) + +#define __HAL_RCC_DTS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB4LPENR, RCC_APB4LPENR_DTSLPEN) + + +#define __HAL_RCC_SBS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SBSLPEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPUART1LPEN) + +#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SPI6LPEN) + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM2LPEN) + +#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM3LPEN) + +#define __HAL_RCC_LPTIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM4LPEN) + +#define __HAL_RCC_LPTIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM5LPEN) + +#define __HAL_RCC_VREF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_VREFLPEN) + +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_RTCAPBLPEN) + +#define __HAL_RCC_DTS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB4LPENR, RCC_APB4LPENR_DTSLPEN) + +/** + * @} + */ + +/** @defgroup RCC_APB5_Clock_Sleep_Enable_Disable APB5 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB5 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB5LPENR, RCC_APB5LPENR_LTDCLPEN) + +#define __HAL_RCC_DCMIPP_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB5LPENR, RCC_APB5LPENR_DCMIPPLPEN) + +#define __HAL_RCC_GFXTIM_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB5LPENR, RCC_APB5LPENR_GFXTIMLPEN) + + +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB5LPENR, RCC_APB5LPENR_LTDCLPEN) + +#define __HAL_RCC_DCMIPP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB5LPENR, RCC_APB5LPENR_DCMIPPLPEN) + +#define __HAL_RCC_GFXTIM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB5LPENR, RCC_APB5LPENR_GFXTIMLPEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPDMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_GPDMA1LPEN) != 0U) + +#define __HAL_RCC_ADC12_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADC12LPEN) != 0U) +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1MACLPEN) != 0U) + +#define __HAL_RCC_ETH1TX_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1TXLPEN) != 0U) + +#define __HAL_RCC_ETH1RX_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ETH1RXLPEN) != 0U) +#endif /* ETH */ + +#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGHSLPEN) != 0U) + +#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_OTGFSLPEN) != 0U) + +#define __HAL_RCC_USBPHYC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_USBPHYCLPEN) != 0U) + +#define __HAL_RCC_ADF1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_ADF1LPEN) != 0U) +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_PSSILPEN) != 0U) + +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SDMMC2LPEN) != 0U) + +#define __HAL_RCC_CORDIC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_CORDICLPEN) != 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM1LPEN) != 0U) + +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2LPENR, RCC_AHB2LPENR_SRAM2LPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_RNGLPEN) != 0U) + +#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_HASHLPEN) != 0U) + +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_CRYPLPEN) != 0U) +#endif /* CRYP */ + +#if defined(SAES) +#define __HAL_RCC_SAES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_SAESLPEN) != 0U) +#endif /* SAES */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3LPENR, RCC_AHB3LPENR_PKALPEN) != 0U) +#endif /* PKA */ + +/** + * @} + */ + +/** @defgroup RCC_AHB4_Clock_Sleep_Enable_Disable_Status AHB4 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB4 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOALPEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOBLPEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOCLPEN) != 0U) + +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIODLPEN) != 0U) + +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOELPEN) != 0U) + +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOFLPEN) != 0U) + +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOGLPEN) != 0U) + +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOHLPEN) != 0U) + +#define __HAL_RCC_GPIOM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOMLPEN) != 0U) + +#define __HAL_RCC_GPION_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIONLPEN) != 0U) + +#define __HAL_RCC_GPIOO_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOOLPEN) != 0U) + +#define __HAL_RCC_GPIOP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_GPIOPLPEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_CRCLPEN) != 0U) + +#define __HAL_RCC_BKPRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB4LPENR, RCC_AHB4LPENR_BKPRAMLPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_AHB5_Clock_Sleep_Enable_Disable_Status AHB5 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB5 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_HPDMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_HPDMA1LPEN) != 0U) + +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DMA2DLPEN) != 0U) + +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FLASHLPEN) != 0U) + +#if defined(JPEG) +#define __HAL_RCC_JPEG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_JPEGLPEN) != 0U) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_FMCLPEN) != 0U) + +#define __HAL_RCC_XSPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI1LPEN) != 0U) + +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_SDMMC1LPEN) != 0U) + +#define __HAL_RCC_XSPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPI2LPEN) != 0U) + +#define __HAL_RCC_XSPIM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_XSPIMLPEN) != 0U) + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GFXMMULPEN) != 0U) +#endif /* GFXMMU */ + +#if defined(GPU2D) +#define __HAL_RCC_GPU2D_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_GPU2DLPEN) != 0U) +#endif /* GPU2D */ + +#define __HAL_RCC_DTCM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM1LPEN) != 0U) + +#define __HAL_RCC_DTCM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_DTCM2LPEN) != 0U) + +#define __HAL_RCC_ITCM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_ITCMLPEN) != 0U) + +#define __HAL_RCC_AXISRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB5LPENR, RCC_AHB5LPENR_AXISRAMLPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM2LPEN) != 0U) + +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM3LPEN) != 0U) + +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM4LPEN) != 0U) + +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM5LPEN) != 0U) + +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM6LPEN) != 0U) + +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM7LPEN) != 0U) + +#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM12LPEN) != 0U) + +#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM13LPEN) != 0U) + +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_TIM14LPEN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_LPTIM1LPEN) != 0U) + +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_WWDGLPEN) != 0U) + +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI2LPEN) != 0U) + +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPI3LPEN) != 0U) + +#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_SPDIFRXLPEN) != 0U) + +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART2LPEN) != 0U) + +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_USART3LPEN) != 0U) + +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART4LPEN) != 0U) + +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART5LPEN) != 0U) + +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) != 0U) + +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C2LPEN) != 0U) + +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C3LPEN) != 0U) + +#define __HAL_RCC_I3C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_I2C1_I3C1LPEN) != 0U) + +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_CECLPEN) != 0U) + +#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART7LPEN) != 0U) + +#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR1, RCC_APB1LPENR1_UART8LPEN) != 0U) + +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_CRSLPEN) != 0U) + +#define __HAL_RCC_MDIOS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_MDIOSLPEN) != 0U) + +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_FDCANLPEN) != 0U) + +#define __HAL_RCC_UCPD1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1LPENR2, RCC_APB1LPENR2_UCPD1LPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM1LPEN) != 0U) + +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_USART1LPEN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI1LPEN) != 0U) + +#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI4LPEN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM15LPEN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM16LPEN) != 0U) + +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM17LPEN) != 0U) + +#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_TIM9LPEN) != 0U) + +#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SPI5LPEN) != 0U) + +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI1LPEN) != 0U) + +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2LPENR, RCC_APB2LPENR_SAI2LPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB4_Clock_Sleep_Enable_Disable_Status APB4 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB4 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SBS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SBSLPEN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPUART1LPEN) != 0U) + +#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_SPI6LPEN) != 0U) + +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM2LPEN) != 0U) + +#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM3LPEN) != 0U) + +#define __HAL_RCC_LPTIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM4LPEN) != 0U) + +#define __HAL_RCC_LPTIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_LPTIM5LPEN) != 0U) + +#define __HAL_RCC_VREF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_VREFLPEN) != 0U) + +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_RTCAPBLPEN) != 0U) + +#define __HAL_RCC_DTS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB4LPENR, RCC_APB4LPENR_DTSLPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB5_Clock_Sleep_Enable_Disable_Status APB5 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB5 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB5LPENR, RCC_APB5LPENR_LTDCLPEN) != 0U) + +#define __HAL_RCC_DCMIPP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB5LPENR, RCC_APB5LPENR_DCMIPPLPEN) != 0U) + +#define __HAL_RCC_GFXTIM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB5LPENR, RCC_APB5LPENR_GFXTIMLPEN) != 0U) + +/** + * @} + */ + +/** @defgroup RCC_Osc_config Oscillators configuration + * @{ + */ + +/** @brief Macro to enable or disable the Internal High Speed oscillator (HSI). + * @note After enabling the HSI, the application software should wait on + * HSIRDY and HSIDIVF flags to be set indicating that the HSI clock is + * stable and the divider ready and that HSI clock can be used to clock + * the PLL and/or system clock. + * @note HSI can not be stopped if it is used directly or through the PLL + * as system clock. In this case, you have to select another source + * of the system clock then stop the HSI. + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @param __STATE__ specifies the new state of the HSI. + * This parameter can be one of the following values: + * @arg @ref RCC_HSI_OFF turn OFF the HSI oscillator + * @arg @ref RCC_HSI_ON turn ON the HSI oscillator (divide it by 1 (default after reset)) + * @arg @ref RCC_HSI_DIV2 turn ON the HSI oscillator and divide it by 2 + * @arg @ref RCC_HSI_DIV4 turn ON the HSI oscillator and divide it by 4 + * @arg @ref RCC_HSI_DIV8 turn ON the HSI oscillator and divide it by 8 + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_CONFIG(__STATE__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIV , (uint32_t)(__STATE__)) + +/** @brief Macro to get the HSI divider. + * @retval The HSI divider. The returned value can be one + * of the following: + * - RCC_CR_HSIDIV_1 HSI oscillator divided by 1 (default after reset) + * - RCC_CR_HSIDIV_2 HSI oscillator divided by 2 + * - RCC_CR_HSIDIV_4 HSI oscillator divided by 4 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 8 + */ +#define __HAL_RCC_GET_HSI_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV))) + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after start-up + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed 64MHz oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x7F. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_HSICFGR_HSITRIM_Pos); + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for some peripherals. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI start-up time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** + * @brief Macros to enable or disable the Internal oscillator (CSI). + * @note The CSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * start-up from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note CSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the CSI. + * @note After enabling the CSI, the application software should wait on + * CSIRDY flag to be set indicating that CSI clock is stable and can + * be used as system clock source. + * @note When the CSI is stopped, CSIRDY flag goes low after 6 CSI oscillator + * clock cycles. + */ +#define __HAL_RCC_CSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSION) + +#define __HAL_RCC_CSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSION) + +/** @brief Macro to adjust the Internal oscillator (CSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal CSI RC. + * @param __CSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_CSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x3F. + * @retval None + */ +#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, (uint32_t)(__CSICALIBRATIONVALUE__) << RCC_CSICFGR_CSITRIM_Pos); + +/** + * @brief Macros to enable or disable the force of the Low-power Internal oscillator (CSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the CSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the CSI start-up time. + * @note The enable of this function has not effect on the CSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_CSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSIKERON) + +#define __HAL_RCC_CSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON) + +/** + * @brief Macro to enable or disable the Internal High Speed oscillator for USB (HSI48). + * @note After enabling the HSI48, the application software should wait on + * HSI48RDY flag to be set indicating that HSI48 clock is stable and can + * be used to clock the USB. + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON); + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (__HSE__). + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock (analog). + * @arg @ref RCC_HSE_BYPASS_DIGITAL HSE oscillator bypassed with external digital clock. + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + } \ + } while(0) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * User should request a transition to LSE Off first and then LSE On or LSE Bypass. + * @note The external input clock can have a frequency up to 1 MHz and be low swing (analog) or digital(*). + A duty cycle close to 50% is recommended. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON, RCC_LSE_BYPASS or RCC_LSE_BYPASS_DIGITAL), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @note If the RTC is used, the LSE bypass must not be configured in digital mode but in low swing analog mode (*) + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock (analog). + * @arg @ref RCC_LSE_BYPASS_DIGITAL LSE oscillator bypassed with external digital clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + } \ + } while(0) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_config RCC_RTC_Clock_config + * @{ + */ + +/** @brief Macros to enable or disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() and + * __HAL_RCC_BACKUPRESET_RELEASE() macros, or by a Power On Reset (POR). + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV2 HSE divide by 2 selected as RTC clock up to + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV63 for HSE divide by 63 + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CLKPRESCALER(__RTC_CLKSOURCE__) \ + ((((__RTC_CLKSOURCE__) & (0x3FU << 12U)) != 0U) ? \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, (((__RTC_CLKSOURCE__) & (~RCC_BDCR_RTCSEL)) >> 4U)) : \ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)) + +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + do { \ + __HAL_RCC_RTC_CLKPRESCALER(__RTC_CLKSOURCE__); \ + SET_BIT(RCC->BDCR, ((__RTC_CLKSOURCE__) & RCC_BDCR_RTCSEL)); \ + } while(0) + +#define __HAL_RCC_GET_RTC_SOURCE() \ + ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ + ((READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) << 4U) | RCC_BDCR_RTCSEL) : READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macros to force or release the Vswitch backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + * @note The BKPSRAM is not affected by this reset. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_VSWRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_VSWRST) + +/** + * @} + */ + +/** @defgroup RCC_PLL_Clocks_config PLL Clocks configuration + * @{ + */ + +/** @brief Macro to configure the PLLs clock source. + * @note This function must be used only when all PLLs are disabled. + * @param __PLLSOURCE__ specifies the PLLs entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_CSI CSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_NONE No oscillator clock selected as PLL clock entry (consumption gain) + */ +#define __HAL_RCC_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. + * The returned value can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_CSI CSI oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator is used as PLL clock source. + * @arg @ref RCC_PLLSOURCE_NONE No oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() \ + READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC) + +/** @brief Macros to enable or disable the PLL1. + * @note After enabling the main PLL, the application software should wait on + * PLL1RDY flag to be set indicating that PLL1 clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL1_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL1ON) + +#define __HAL_RCC_PLL1_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON) + +/** + * @brief Enables or disables each clock output (PLL_P_CLK, PLL_Q_CLK, PLL_R_CLK, PLL_S_CLK, PLL_T_CLK) + * @note PLL_P_CLK cannot be stopped if used as System Clock + * @param __PLL_CLOCKOUT__ specifies the PLL clock to be output + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLL_PCLK This clock is used to generate system clock up to 500MHz + * @arg @ref RCC_PLL_QCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_RCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_SCLK This clock is used to generate peripherals clock up to 500MHz + * + * @retval None + */ +#define __HAL_RCC_PLL1CLKOUT_ENABLE(__PLL_CLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLL_CLOCKOUT__)) + +#define __HAL_RCC_PLL1CLKOUT_DISABLE(__PLL_CLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLL_CLOCKOUT__)) + +/** + * @brief Macro to get the PLL1 clock output enable status. + * @param __PLL_CLOCKOUT__ specifies the PLL1 clock to be output. + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_PCLK This clock is used to generate system clock up to 500MHz + * @arg @ref RCC_PLL_QCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_RCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_SCLK This clock is used to generate peripherals clock up to 500MHz + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLL1CLKOUT_CONFIG(__PLL_CLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLL_CLOCKOUT__)) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL1 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL1 + * @retval None + */ +#define __HAL_RCC_PLL1_FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + +#define __HAL_RCC_PLL1_FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_CSI CSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_NONE No oscillator clock selected as PLL clock entry (consumption gain) + * @note This clock source is common for PLL1, PLL2 and PLL3. It cannot be + * change on any PLL if another PLL is already enabled. + * + * @param __PLL1M__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL1N__ specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between 8 and 420. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 128 and 560 MHZ (when in wide VCO range) + * + * @param __PLL1P__ specifies the division factor for system clock. + * This parameter must be a number between 1 and 128 (where odd numbers are not allowed) + * + * @param __PLL1Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL1R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL1S__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 8 + * + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ, + * DIVR, DIVS or DIVT) is not used, application shall clear the enable bit (PLL1yEN) + * and assign lowest possible value to __PLL1P__, __PLL1Q__, __PLL1R__, __PLL1S__ + * or __PLL1T__ parameters. + * @retval None + */ + +#define __HAL_RCC_PLL1_CONFIG(__PLLSOURCE__, __PLL1M__, __PLL1N__, __PLL1P__, __PLL1Q__, __PLL1R__, __PLL1S__) \ + do { \ + MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_PLLSRC | RCC_PLLCKSELR_DIVM1) , ((__PLLSOURCE__) | ( (__PLL1M__) << RCC_PLLCKSELR_DIVM1_Pos))); \ + WRITE_REG(RCC->PLL1DIVR1, ((((__PLL1N__) - 1U) & RCC_PLL1DIVR1_DIVN) | \ + ((((__PLL1P__) - 1U) << RCC_PLL1DIVR1_DIVP_Pos) & RCC_PLL1DIVR1_DIVP) | \ + ((((__PLL1Q__) - 1U) << RCC_PLL1DIVR1_DIVQ_Pos) & RCC_PLL1DIVR1_DIVQ) | \ + ((((__PLL1R__) - 1U) << RCC_PLL1DIVR1_DIVR_Pos) & RCC_PLL1DIVR1_DIVR))); \ + MODIFY_REG(RCC->PLL1DIVR2, RCC_PLL1DIVR2_DIVS, \ + (((__PLL1S__) - 1U) & RCC_PLL1DIVR2_DIVS)); \ + } while(0) + +/** + * @brief Macro to configures the PLL1 clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL1 VCO + * + * @param __PLL1FRACN__ specifies Fractional Part Of The Multiplication Factor for PLL1 VCO. + * It should be a value between 0 and 8191 + * @note Warning: The software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 128 to 560 MHz if PLL1VCOSEL = 0 + * 150 to 420 MHz if PLL1VCOSEL = 1. + * + * @retval None + */ +#define __HAL_RCC_PLL1_FRACN_CONFIG(__PLL1FRACN__) \ + MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN, (uint32_t)(__PLL1FRACN__) << RCC_PLL1FRACR_FRACN_Pos) + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __PLL_VCOINPUT_RANGE__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_VCOINPUT_RANGE0 Range frequency is between 1 and 2 MHz + * @arg @ref RCC_PLL_VCOINPUT_RANGE1 Range frequency is between 2 and 4 MHz + * @arg @ref RCC_PLL_VCOINPUT_RANGE2 Range frequency is between 4 and 8 MHz + * @arg @ref RCC_PLL_VCOINPUT_RANGE3 Range frequency is between 8 and 16 MHz + * + * @retval None + */ +#define __HAL_RCC_PLL1_VCOINPUT_RANGE(__PLL_VCOINPUT_RANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, (__PLL_VCOINPUT_RANGE__)) + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __PLLVCORANGE__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_VCO_HIGH Range frequency is between 128 to 560 MHz + * @arg @ref RCC_PLL_VCO_LOW Range frequency is between 150 and 420 MHz + * @retval None + */ +#define __HAL_RCC_PLL1_VCORANGE(__PLLVCORANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, (__PLLVCORANGE__)) + +/** @brief Macros to enable or disable PLL2. + * @note After enabling PLL2, the application software should wait on + * PLL2RDY flag to be set indicating that PLL2 clock is stable and can + * be used as kernel clock source. + * @note PLL2 is disabled by hardware when entering Stop and Standby modes. + */ +#define __HAL_RCC_PLL2_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL2ON) +#define __HAL_RCC_PLL2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON) + +/** + * @brief Enables or disables each clock output (PLL2_P_CLK, PLL2_Q_CLK, PLL2_R_CLK, PLL2_S_CLK, PLL2_T_CLK) + * @param __PLL_CLOCKOUT__ Specifies the PLL2 clock(s) to be output + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLL_PCLK This clock is used to generate system clock up to 500MHz + * @arg @ref RCC_PLL_QCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_RCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_SCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_TCLK This clock is used to generate peripherals clock up to 500MHz + * @retval None + */ +#define __HAL_RCC_PLL2CLKOUT_ENABLE(__PLL_CLOCKOUT__) SET_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL2PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) + +#define __HAL_RCC_PLL2CLKOUT_DISABLE(__PLL_CLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL2PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) + +/** + * @brief Macro to get the PLL2 clock output enable status. + * @param __PLL_CLOCKOUT__ specifies the PLL2 clock to be output. + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_PCLK This clock is used to generate system clock up to 500MHz + * @arg @ref RCC_PLL_QCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_RCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_SCLK This clock is used to generate peripherals clock up to 500MHz + * @arg @ref RCC_PLL_TCLK This clock is used to generate peripherals clock up to 500MHz + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG(__PLL_CLOCKOUT__) (READ_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL2PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) \ + >> (RCC_PLLCFGR_PLL2PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos)) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL2 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL2 + * @retval None + */ +#define __HAL_RCC_PLL2_FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +#define __HAL_RCC_PLL2_FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +/** + * @brief Macro to configures the PLL2 multiplication and division factors. + * @note This function must be used only when PLL2 is disabled. + * + * @param __PLLSOURCE__ specifies the PLL2 clock source + * This parameter must be a value of @ref RCC_PLL_Clock_Source + * @note PLL2 clock source is addressing a common clock source for all PLLs. + * + * @param __PLL2M__ specifies the division factor for PLL2 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL2N__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLL2N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL2P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2S__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 8. + * + * @param __PLL2T__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 8. + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ, + * DIVR, DIVS and DIVT) is not used, application shall clear the enable bit (PLL2yEN) + * and assign lowest possible value to __PLL2P__, __PLL2Q__, __PLL2R__, __PLL2S__ + * or __PLL2T__ parameters. + * @retval None + */ + +#define __HAL_RCC_PLL2_CONFIG(__PLLSOURCE__, __PLL2M__, __PLL2N__, __PLL2P__, __PLL2Q__, __PLL2R__, __PLL2S__, __PLL2T__) \ + do{ \ + MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_DIVM2 | RCC_PLLCKSELR_PLLSRC), \ + (((__PLL2M__) << RCC_PLLCKSELR_DIVM2_Pos) | (__PLLSOURCE__))); \ + WRITE_REG(RCC->PLL2DIVR1, ((((__PLL2N__) - 1U) & RCC_PLL2DIVR1_DIVN) | \ + ((((__PLL2P__) - 1U) << RCC_PLL2DIVR1_DIVP_Pos) & RCC_PLL2DIVR1_DIVP) | \ + ((((__PLL2Q__) - 1U) << RCC_PLL2DIVR1_DIVQ_Pos) & RCC_PLL2DIVR1_DIVQ) | \ + ((((__PLL2R__) - 1U) << RCC_PLL2DIVR1_DIVR_Pos) & RCC_PLL2DIVR1_DIVR))); \ + MODIFY_REG(RCC->PLL2DIVR2, (RCC_PLL2DIVR2_DIVS | RCC_PLL2DIVR2_DIVT) , \ + ((((__PLL2S__) - 1U) & RCC_PLL2DIVR2_DIVS) | \ + ((((__PLL2T__) - 1U) << RCC_PLL2DIVR2_DIVT_Pos) & RCC_PLL2DIVR2_DIVT))); \ + } while(0) + +/** + * @brief Macro to configures PLL2 clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL2 VCO + * + * @param __PLL2FRACN__ Specifies Fractional Part Of The Multiplication factor for PLL2 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL2VCOSEL = 0 + * 150 to 420 MHz if PLL2VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2_FRACN_CONFIG(__PLL2FRACN__) \ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN,((uint32_t)(__PLL2FRACN__) << RCC_PLL2FRACR_FRACN_Pos)) + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __PLL_VCOINPUT_RANGE__ specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL_VCOINPUT_RANGE0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL_VCOINPUT_RANGE1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL_VCOINPUT_RANGE2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL_VCOINPUT_RANGE3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL2_VCOINPUT_RANGE(__PLL_VCOINPUT_RANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, ((__PLL_VCOINPUT_RANGE__) << (RCC_PLLCFGR_PLL2RGE_Pos - RCC_PLLCFGR_PLL1RGE_Pos))) + + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __PLLVCORANGE__ Specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL_VCO_HIGH: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL_VCO_LOW: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2_VCORANGE(__PLLVCORANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, ((__PLLVCORANGE__) << (RCC_PLLCFGR_PLL2VCOSEL_Pos - RCC_PLLCFGR_PLL1VCOSEL_Pos))) + +/** @brief Macros to enable or disable the main PLL3. + * @note After enabling PLL3, the application software should wait on + * PLL3RDY flag to be set indicating that PLL3 clock is stable and can + * be used as kernel clock source. + * @note PLL3 is disabled by hardware when entering Stop and Standby modes. + */ +#define __HAL_RCC_PLL3_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL3ON) +#define __HAL_RCC_PLL3_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL3 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL3 + * @retval None + */ +#define __HAL_RCC_PLL3_FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +#define __HAL_RCC_PLL3_FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +/** + * @brief Enables or disables each clock output (PLL3_P_CLK, PLL3_Q_CLK, PLL3_R_CLK, PLL3_S_CLK, PLL3_T_CLK) + * @param __PLL_CLOCKOUT__ Specifies the PLL3 clock(s) to be output + * This parameter can be one or a combination of the following values: + * @arg RCC_PLL_PCLK + * @arg RCC_PLL_QCLK + * @arg RCC_PLL_RCLK + * @arg RCC_PLL_SCLK + * @retval SET / RESET + */ +#define __HAL_RCC_PLL3CLKOUT_ENABLE(__PLL_CLOCKOUT__) SET_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL3PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) + +#define __HAL_RCC_PLL3CLKOUT_DISABLE(__PLL_CLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL3PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) + +/** + * @brief Macro to get the PLL3 clock output enable status. + * @param __PLL_CLOCKOUT__ specifies the PLL3 clock(s) to be output. + * This parameter can be one of the following values: + * @arg RCC_PLL_PCLK + * @arg RCC_PLL_QCLK + * @arg RCC_PLL_RCLK + * @arg RCC_PLL_SCLK + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG(__PLL_CLOCKOUT__) (READ_BIT(RCC->PLLCFGR, ((__PLL_CLOCKOUT__) << (RCC_PLLCFGR_PLL3PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos))) \ + >> (RCC_PLLCFGR_PLL3PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos)) + +/** + * @brief Macro to configures the PLL3 multiplication and division factors. + * @note This function must be used only when PLL3 is disabled. + * + * @param __PLLSOURCE__ specifies the PLL3 clock source + * This parameter must be a value of @ref RCC_PLL_Clock_Source + * @note PLL3 clock source is addressing a common clock source for all PLLs. + * + * @param __PLL3M__ specifies the division factor for PLL3 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL3N__ specifies the multiplication factor for PLL3 VCO output clock + * This parameter must be a number between 4 and 512. + * @note You have to set the PLL3N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL3P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 2 and 128 (where odd numbers not allowed) + * + * @param __PLL3Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL3R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL3S__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 8. + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ, + * DIVR, DIVS and DIVT) is not used, application shall clear the enable bit (PLL3yEN) + * and assign lowest possible value to __PLL3P__, __PLL3Q__, __PLL3R__, __PLL3S__ + * or __PLL3T__ parameters. + */ + +#define __HAL_RCC_PLL3_CONFIG(__PLLSOURCE__, __PLL3M__, __PLL3N__, __PLL3P__, __PLL3Q__, __PLL3R__, __PLL3S__) \ + do{ \ + MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_DIVM3 | RCC_PLLCKSELR_PLLSRC), \ + (((__PLL3M__) << RCC_PLLCKSELR_DIVM3_Pos) | (__PLLSOURCE__))); \ + WRITE_REG(RCC->PLL3DIVR1, ((((__PLL3N__) - 1U) & RCC_PLL3DIVR1_DIVN) | \ + ((((__PLL3P__) - 1U) << RCC_PLL3DIVR1_DIVP_Pos) & RCC_PLL3DIVR1_DIVP) | \ + ((((__PLL3Q__) - 1U) << RCC_PLL3DIVR1_DIVQ_Pos) & RCC_PLL3DIVR1_DIVQ) | \ + ((((__PLL3R__) - 1U) << RCC_PLL3DIVR1_DIVR_Pos) & RCC_PLL3DIVR1_DIVR))); \ + MODIFY_REG(RCC->PLL3DIVR2, RCC_PLL3DIVR2_DIVS, \ + (((__PLL3S__) - 1U) & RCC_PLL3DIVR2_DIVS)); \ + } while(0) + +/** + * @brief Macro to configures PLL3 clock Fractional Part of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL3 VCO + * + * @param __PLL3FRACN__ specifies Fractional Part Of The Multiplication Factor for PLL3 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL3VCOSEL = 0 + * 150 to 420 MHz if PLL3VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3_FRACN_CONFIG(__PLL3FRACN__) MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN, (uint32_t)(__PLL3FRACN__) << RCC_PLL3FRACR_FRACN_Pos) + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __PLL_VCOINPUT_RANGE__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL_VCOINPUT_RANGE0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL_VCOINPUT_RANGE1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL_VCOINPUT_RANGE2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL_VCOINPUT_RANGE3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL3_VCOINPUT_RANGE(__PLL_VCOINPUT_RANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, ((__PLL_VCOINPUT_RANGE__) << (RCC_PLLCFGR_PLL3RGE_Pos - RCC_PLLCFGR_PLL1RGE_Pos))) + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __PLLVCORANGE__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL_VCO_HIGH: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL_VCO_HIGH: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3_VCORANGE(__PLLVCORANGE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, ((__PLLVCORANGE__) << (RCC_PLLCFGR_PLL3VCOSEL_Pos - RCC_PLLCFGR_PLL1VCOSEL_Pos))) + +/** + * @} + */ + +/** @defgroup RCC_sysclk_config System clock source configuration + * @{ + */ + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_CSI CSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL1 output is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. + * The returned value can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_CSI CSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL1 used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() \ + READ_BIT(RCC->CFGR, RCC_CFGR_SWS) + +/** + * @} + */ + +/** @addtogroup RCC_Osc_config + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note This parameter cannot be updated while LSE is ON. + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)); +/** + * @} + */ + +/** @defgroup RCC_wkup_config Wakeup from stop configuration + * @{ + */ + +/** + * @brief Macro to configure the wake up from stop clock. + * @param __STOPWUCLK__ specifies the clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source + * @arg @ref RCC_STOP_WAKEUPCLOCK_CSI CSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__STOPWUCLK__)) + +/** + * @brief Macro to configure the Kernel wake up from stop clock. + * @param __STOPKERWUCLK__ specifies the Kernel clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_KERWAKEUPCLOCK_HSI HSI selected as Kernel clock source + * @arg @ref RCC_STOP_KERWAKEUPCLOCK_CSI CSI selected as Kernel clock source + * @retval None + */ +#define __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(__STOPKERWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, (__STOPKERWUCLK__)) +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Config RCC MCOx Clock Config + * @{ + */ + +/** @brief Macro to configure the MCO1 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_PLL1Q PLL1Q clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO1 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO1 clock + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @brief Macro to configure the MCO2 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2SOURCE_SYSCLK System clock (SYSCLK) selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLL2P PLL2P clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_PLL1P PLL1P clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_CSI CSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO2 clock + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7U))); + +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_CSIRDY CSI ready interrupt + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + * @arg @ref RCC_IT_PLL1RDY PLL1 ready interrupt + * @arg @ref RCC_IT_PLL2RDY PLL2 ready interrupt + * @arg @ref RCC_IT_PLL3RDY PLL3 ready interrupt + * @arg @ref RCC_IT_LSECSS Clock security system interrupt + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_CSIRDY CSI ready interrupt + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + * @arg @ref RCC_IT_PLL1RDY PLL1 ready interrupt + * @arg @ref RCC_IT_PLL2RDY PLL2 ready interrupt + * @arg @ref RCC_IT_PLL3RDY PLL3 ready interrupt + * @arg @ref RCC_IT_LSECSS LSE clock security system interrupt + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear the RCC's interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_CSIRDY CSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + * @arg @ref RCC_IT_PLL1RDY PLL1 ready interrupt + * @arg @ref RCC_IT_PLL2RDY PLL2 ready interrupt + * @arg @ref RCC_IT_PLL3RDY PLL3 ready interrupt + * @arg @ref RCC_IT_LSECSS LSE clock security system interrupt + * @arg @ref RCC_IT_HSECSS HSE clock security interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) WRITE_REG(RCC->CICR, (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_CSIRDY CSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt + * @arg @ref RCC_IT_PLL1RDY PLL1 ready interrupt + * @arg @ref RCC_IT_PLL2RDY PLL2 ready interrupt + * @arg @ref RCC_IT_PLL3RDY PLL3 ready interrupt + * @arg @ref RCC_IT_LSECSS LSE clock security system interrupt + * @arg @ref RCC_IT_HSECSS HSE clock security interrupt + * @retval The pending state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) (READ_BIT(RCC->CIFR, (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_BORRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->RSR, RCC_RSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSIDIV HSI divider ready + * @arg @ref RCC_FLAG_CSIRDY CSI oscillator clock ready + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLL1RDY PLL1 clock ready + * @arg @ref RCC_FLAG_PLL2RDY PLL2 clock ready + * @arg @ref RCC_FLAG_PLL3RDY PLL3 clock ready + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + * @arg @ref RCC_FLAG_BORRST BOR reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_PORRST Power-on reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == RCC_CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == RCC_BDCR_REG_INDEX) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == RCC_CSR_REG_INDEX) ? RCC->CSR : \ + ((((__FLAG__) >> 5U) == RCC_RSR_REG_INDEX) ? RCC->RSR : RCC->CIFR)))) & \ + (1UL << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32h7rsxx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(const RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +uint32_t HAL_RCC_GetPCLK4Freq(void); +uint32_t HAL_RCC_GetPCLK5Freq(void); +uint32_t HAL_RCC_GetPLL1PFreq(void); +uint32_t HAL_RCC_GetPLL1QFreq(void); +uint32_t HAL_RCC_GetPLL1RFreq(void); +uint32_t HAL_RCC_GetPLL1SFreq(void); +uint32_t HAL_RCC_GetPLL2PFreq(void); +uint32_t HAL_RCC_GetPLL2QFreq(void); +uint32_t HAL_RCC_GetPLL2RFreq(void); +uint32_t HAL_RCC_GetPLL2SFreq(void); +uint32_t HAL_RCC_GetPLL2TFreq(void); +uint32_t HAL_RCC_GetPLL3PFreq(void); +uint32_t HAL_RCC_GetPLL3QFreq(void); +uint32_t HAL_RCC_GetPLL3RFreq(void); +uint32_t HAL_RCC_GetPLL3SFreq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User callbacks in non blocking mode (IT mode) */ +void HAL_RCC_HSECSSCallback(void); +void HAL_RCC_LSECSSCallback(void); +uint32_t HAL_RCC_GetResetSource(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define RCC_PLL_VCOINPUTFREQ_MAX 16000000U /* Maximum VCO input frequency is 16 MHz */ +#define RCC_PLL_VCOINPUTFREQ_MIN 1000000U /* Minimum VCO input frequency is 1 MHz */ + +#define RCC_PLL_TIMEOUT_VALUE (50U) /* 50 ms */ + +/* Defines used for Flags */ +#define RCC_CR_REG_INDEX 1U +#define RCC_BDCR_REG_INDEX 2U +#define RCC_CSR_REG_INDEX 3U +#define RCC_RSR_REG_INDEX 4U + +#define RCC_FLAG_MASK 0x0000001FU + +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS) || ((__HSE__) == RCC_HSE_BYPASS_DIGITAL)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS) || ((__LSE__) == RCC_LSE_BYPASS_DIGITAL)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_HSIDIV(__HSIDIV__) (((__HSIDIV__) == RCC_HSI_DIV1) || ((__HSIDIV__) == RCC_HSI_DIV2) || \ + ((__HSIDIV__) == RCC_HSI_DIV4) || ((__HSIDIV__) == RCC_HSI_DIV8)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) \ + <= (uint32_t)( RCC_HSICFGR_HSITRIM >> RCC_HSICFGR_HSITRIM_Pos)) + +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_CSI(__CSI__) (((__CSI__) == RCC_CSI_OFF) || ((__CSI__) == RCC_CSI_ON)) + +#define IS_RCC_CSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) \ + <= (uint32_t)( RCC_CSICFGR_CSITRIM >> RCC_CSICFGR_CSITRIM_Pos)) + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_CSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 63U)) + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 420U)) + +#define IS_RCC_PLLP_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 128U)) + +#define IS_RCC_PLLQ_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 128U)) + +#define IS_RCC_PLLR_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 128U)) + +#define IS_RCC_PLLS_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) + +#define IS_RCC_PLLT_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) + +#define IS_RCC_PLL_VCOINPUTFREQ(__VALUE__) ((RCC_PLL_VCOINPUTFREQ_MIN <= (__VALUE__)) &&\ + ((__VALUE__) <= RCC_PLL_VCOINPUTFREQ_MAX)) + +#define IS_RCC_PLLFRACN_VALUE(__VALUE__) ((__VALUE__) <= 8191U) + +#define IS_RCC_PLLCLOCKOUT_VALUE(__VALUE__) (((__VALUE__) == RCC_PLL_PCLK) || \ + ((__VALUE__) == RCC_PLL_QCLK) || \ + ((__VALUE__) == RCC_PLL_RCLK) || \ + ((__VALUE__) == RCC_PLL_SCLK)) + +#define IS_RCC_PLLRGE_VALUE(__VALUE__) (((__VALUE__) == RCC_PLL_VCOINPUT_RANGE0) || \ + ((__VALUE__) == RCC_PLL_VCOINPUT_RANGE1) || \ + ((__VALUE__) == RCC_PLL_VCOINPUT_RANGE2) || \ + ((__VALUE__) == RCC_PLL_VCOINPUT_RANGE3)) + +#define IS_RCC_PLLVCO_VALUE(__VALUE__) (((__VALUE__) == RCC_PLL_VCO_HIGH) || \ + ((__VALUE__) == RCC_PLL_VCO_LOW)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= 63U)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_SYSCLK(__SYSCLK__) (((__SYSCLK__) == RCC_SYSCLK_DIV1) || ((__SYSCLK__) == RCC_SYSCLK_DIV2) || \ + ((__SYSCLK__) == RCC_SYSCLK_DIV4) || ((__SYSCLK__) == RCC_SYSCLK_DIV8) || \ + ((__SYSCLK__) == RCC_SYSCLK_DIV16) || ((__SYSCLK__) == RCC_SYSCLK_DIV64) || \ + ((__SYSCLK__) == RCC_SYSCLK_DIV128) || ((__SYSCLK__) == RCC_SYSCLK_DIV256) || \ + ((__SYSCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_HCLK_DIV1) || ((__HCLK__) == RCC_HCLK_DIV2) || \ + ((__HCLK__) == RCC_HCLK_DIV4) || ((__HCLK__) == RCC_HCLK_DIV8) || \ + ((__HCLK__) == RCC_HCLK_DIV16) || ((__HCLK__) == RCC_HCLK_DIV64) || \ + ((__HCLK__) == RCC_HCLK_DIV128) || ((__HCLK__) == RCC_HCLK_DIV256) || \ + ((__HCLK__) == RCC_HCLK_DIV512)) + +#define IS_RCC_PCLK1(__PCLK1__) (((__PCLK1__) == RCC_APB1_DIV1) || ((__PCLK1__) == RCC_APB1_DIV2) || \ + ((__PCLK1__) == RCC_APB1_DIV4) || ((__PCLK1__) == RCC_APB1_DIV8) || \ + ((__PCLK1__) == RCC_APB1_DIV16)) + +#define IS_RCC_PCLK2(__PCLK2__) (((__PCLK2__) == RCC_APB2_DIV1) || ((__PCLK2__) == RCC_APB2_DIV2) || \ + ((__PCLK2__) == RCC_APB2_DIV4) || ((__PCLK2__) == RCC_APB2_DIV8) || \ + ((__PCLK2__) == RCC_APB2_DIV16)) + +#define IS_RCC_PCLK4(__PCLK4__) (((__PCLK4__) == RCC_APB4_DIV1) || ((__PCLK4__) == RCC_APB4_DIV2) || \ + ((__PCLK4__) == RCC_APB4_DIV4) || ((__PCLK4__) == RCC_APB4_DIV8) || \ + ((__PCLK4__) == RCC_APB4_DIV16)) + +#define IS_RCC_PCLK5(__PCLK5__) (((__PCLK5__) == RCC_APB5_DIV1) || ((__PCLK5__) == RCC_APB5_DIV2) || \ + ((__PCLK5__) == RCC_APB5_DIV4) || ((__PCLK5__) == RCC_APB5_DIV8) || \ + ((__PCLK5__) == RCC_APB5_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV33) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV34) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV35) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV36) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV37) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV38) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV39) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV40) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV41) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV42) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV43) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV44) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV45) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV46) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV47) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV48) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV49) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV50) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV51) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV52) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV53) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV54) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV55) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV56) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV57) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV58) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV59) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV60) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV61) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV62) || ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV63) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_DISABLE)) + +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1_PA8) || \ + ((__MCOX__) == RCC_MCO2_PC9)) + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) + +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO2SOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || ((__SOURCE__) == RCC_MCO2SOURCE_PLL1P) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_CSI) || ((__SOURCE__) == RCC_MCO2SOURCE_LSI)) + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_NONE) || ((__DIV__) == RCC_MCODIV_1) || \ + ((__DIV__) == RCC_MCODIV_2) || ((__DIV__) == RCC_MCODIV_3) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_5) || \ + ((__DIV__) == RCC_MCODIV_6) || ((__DIV__) == RCC_MCODIV_7) || \ + ((__DIV__) == RCC_MCODIV_8) || ((__DIV__) == RCC_MCODIV_9) || \ + ((__DIV__) == RCC_MCODIV_10) || ((__DIV__) == RCC_MCODIV_11) || \ + ((__DIV__) == RCC_MCODIV_12) || ((__DIV__) == RCC_MCODIV_13) || \ + ((__DIV__) == RCC_MCODIV_14) || ((__DIV__) == RCC_MCODIV_15)) + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#define IS_RCC_FLAG(__FLAG__) (((__FLAG__) == RCC_FLAG_HSIRDY) || ((__FLAG__) == RCC_FLAG_HSIDIV ) || \ + ((__FLAG__) == RCC_FLAG_CSIRDY) || ((__FLAG__) == RCC_FLAG_HSI48RDY) || \ + ((__FLAG__) == RCC_FLAG_HSERDY) || ((__FLAG__) == RCC_FLAG_PLL1RDY) || \ + ((__FLAG__) == RCC_FLAG_PLL2RDY) || ((__FLAG__) == RCC_FLAG_PLL3RDY) || \ + ((__FLAG__) == RCC_FLAG_LSERDY) || ((__FLAG__) == RCC_FLAG_LSECSSD) || \ + ((__FLAG__) == RCC_FLAG_LSIRDY) || ((__FLAG__) == RCC_FLAG_BORRST) || \ + ((__FLAG__) == RCC_FLAG_PINRST) || ((__FLAG__) == RCC_FLAG_PORRST) || \ + ((__FLAG__) == RCC_FLAG_SFTRST) || ((__FLAG__) == RCC_FLAG_IWDGRST) || \ + ((__FLAG__) == RCC_FLAG_WWDGRST) || ((__FLAG__) == RCC_FLAG_LPWRRST)) + +#define IS_RCC_HSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x7FU) + +#define IS_RCC_CSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x3FU) + +#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_CSI) || \ + ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI)) + +#define IS_RCC_STOP_KERWAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_KERWAKEUPCLOCK_CSI) || \ + ((__SOURCE__) == RCC_STOP_KERWAKEUPCLOCK_HSI)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_RCC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc_ex.h new file mode 100644 index 000000000..4e9d66d3c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rcc_ex.h @@ -0,0 +1,1996 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RCC_EX_H +#define STM32H7RSxx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC PLL1 Clocks structure definition + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t FmcClockSelection; /*!< Specifies FMC clock source + This parameter can be a value of @ref RCCEx_FMC_Clock_Source */ + + uint32_t Xspi1ClockSelection; /*!< Specifies XSPI1 clock source + This parameter can be a value of @ref RCCEx_XSPI1_Clock_Source */ + + uint32_t Xspi2ClockSelection; /*!< Specifies XSPI2 clock source + This parameter can be a value of @ref RCCEx_XSPI2_Clock_Source */ + + uint32_t CkperClockSelection; /*!< Specifies CKPER clock source + This parameter can be a value of @ref RCCEx_CLKP_Clock_Source */ + + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ + + uint32_t Adf1ClockSelection; /*!< Specifies ADF1 Clock clock source + This parameter can be a value of @ref RCCEx_ADF1_Clock_Source */ + + uint32_t CecClockSelection; /*!< Specifies CEC clock source + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t Eth1RefClockSelection; /*!< Specifies ETH1 REF clock source + This parameter can be a value of @ref RCCEx_ETH1REF_Clock_Source */ + + uint32_t Eth1PhyClockSelection; /*!< Specifies ETH1 PHY clock source + This parameter can be a value of @ref RCCEx_ETH1PHY_Clock_Source */ + + uint32_t FdcanClockSelection; /*!< Specifies FDCAN kernel clock source + This parameter can be a value of @ref RCCEx_FDCAN_Clock_Source */ + + uint32_t I2c1_I3c1ClockSelection; /*!< Specifies I2C1/I3C1 clock source + This parameter can be a value of @ref RCCEx_I2C1_I3C1_Clock_Source */ + + uint32_t I2c23ClockSelection; /*!< Specifies I2C2/I2C3 clock source + This parameter can be a value of @ref RCCEx_I2C23_Clock_Source */ + + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ + + uint32_t Lptim23ClockSelection; /*!< Specifies LPTIM2/LPTIM3 clock source + This parameter can be a value of @ref RCCEx_LPTIM23_Clock_Source */ + + uint32_t Lptim45ClockSelection; /*!< Specifies LPTIM4/LPTIM5 clock source + This parameter can be a value of @ref RCCEx_LPTIM45_Clock_Source */ + + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ + + uint32_t LtdcClockSelection; /*!< Specifies LPUART1 clock source + This parameter can be a value of @ref RCCEx_LTDC_Clock_Source */ + + uint32_t PssiClockSelection; /*!< Specifies PSSI clock source + This parameter can be a value of @ref RCCEx_PSSI_Clock_Source */ + + uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source + This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ + + uint32_t Sai2ClockSelection; /*!< Specifies SAI2 clock source + This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ + + uint32_t Sdmmc12ClockSelection; /*!< Specifies SDMMC clock source + This parameter can be a value of @ref RCCEx_SDMMC12_Clock_Source */ + + uint32_t Spi1ClockSelection; /*!< Specifies SPI1 clock source + This parameter can be a value of @ref RCCEx_SPI1_Clock_Source */ + + uint32_t Spi23ClockSelection; /*!< Specifies SPI2/SPI3 clock source + This parameter can be a value of @ref RCCEx_SPI23_Clock_Source */ + + uint32_t Spi45ClockSelection; /*!< Specifies SPI4/SPI5 clock source + This parameter can be a value of @ref RCCEx_SPI45_Clock_Source */ + + uint32_t Spi6ClockSelection; /*!< Specifies SPI6 clock source + This parameter can be a value of @ref RCCEx_SPI6_Clock_Source */ + + uint32_t SpdifrxClockSelection; /*!< Specifies SPDIFRX Clock clock source + This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ + + uint32_t Usart234578ClockSelection; /*!< Specifies USART2/USART3/UART4/UART5/UART7/UART8 clock source + This parameter can be a value of @ref RCCEx_USART234578_Clock_Source */ + + uint32_t UsbPhycClockSelection; /*!< Specifies USB PHYC clock source + This parameter can be a value of @ref RCCEx_USB_PHYC_Clock_Source */ + + uint32_t UsbOtgFsClockSelection; /*!< Specifies USB OTG FS clock source + This parameter can be a value of @ref RCCEx_USB_OTGFS_Clock_Source */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock clock source + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. + This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */ +} RCC_PeriphCLKInitTypeDef; + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +} RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x3F */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +} RCC_CRSSynchroInfoTypeDef; + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_FMC (0x00000001U) +#define RCC_PERIPHCLK_XSPI1 (0x00000002U) +#define RCC_PERIPHCLK_XSPI2 (0x00000004U) +#define RCC_PERIPHCLK_CKPER (0x00000008U) +#define RCC_PERIPHCLK_ADC (0x00000010U) +#define RCC_PERIPHCLK_ADF1 (0x00000020U) +#define RCC_PERIPHCLK_CEC (0x00000040U) +#define RCC_PERIPHCLK_ETH1REF (0x00000080U) +#define RCC_PERIPHCLK_ETH1PHY (0x00000100U) +#define RCC_PERIPHCLK_FDCAN (0x00000200U) +#define RCC_PERIPHCLK_I2C23 (0x00000400U) +#define RCC_PERIPHCLK_I2C1_I3C1 (0x00000800U) +#define RCC_PERIPHCLK_LPTIM1 (0x00001000U) +#define RCC_PERIPHCLK_LPTIM23 (0x00002000U) +#define RCC_PERIPHCLK_LPTIM45 (0x00004000U) +#define RCC_PERIPHCLK_LPUART1 (0x00008000U) +#define RCC_PERIPHCLK_LTDC (0x00010000U) +#define RCC_PERIPHCLK_PSSI (0x00020000U) +#define RCC_PERIPHCLK_RTC (0x00040000U) +#define RCC_PERIPHCLK_SAI1 (0x00080000U) +#define RCC_PERIPHCLK_SAI2 (0x00100000U) +#define RCC_PERIPHCLK_SDMMC12 (0x00200000U) +#define RCC_PERIPHCLK_SPDIFRX (0x00400000U) +#define RCC_PERIPHCLK_SPI1 (0x00800000U) +#define RCC_PERIPHCLK_SPI23 (0x01000000U) +#define RCC_PERIPHCLK_SPI45 (0x02000000U) +#define RCC_PERIPHCLK_SPI6 (0x04000000U) +#define RCC_PERIPHCLK_TIM (0x08000000U) +#define RCC_PERIPHCLK_USART1 (0x10000000U) +#define RCC_PERIPHCLK_USART234578 (0x20000000U) +#define RCC_PERIPHCLK_USBPHYC (0x40000000U) +#define RCC_PERIPHCLK_USBOTGFS (0x80000000U) +/** + * @} + */ + +/** @defgroup RCCEx_FMC_Clock_Source FMC Clock Source + * @{ + */ +#define RCC_FMCCLKSOURCE_HCLK 0U /*!< HCLK selection (default) */ +#define RCC_FMCCLKSOURCE_PLL1Q RCC_CCIPR1_FMCSEL_0 /*!< PLL 'Q' output selection */ +#define RCC_FMCCLKSOURCE_PLL2R RCC_CCIPR1_FMCSEL_1 /*!< PLL2 'R' output selection */ +#define RCC_FMCCLKSOURCE_HSI RCC_CCIPR1_FMCSEL /*!< HSI selection */ +#define RCC_FMCCLKSOURCE_HCLK_DIV4 (RCC_CKPROTR_FMCSWP_2 | RCC_CKPROTR_FMCSWP_0) /*!< HCLK/4 selection (recovery position) */ +/** + * @} + */ + +/** @defgroup RCCEx_XSPI1_Clock_Source XSPI1 Clock Source + * @{ + */ +#define RCC_XSPI1CLKSOURCE_HCLK 0U /*!< HCLK selection (default) */ +#define RCC_XSPI1CLKSOURCE_PLL2S RCC_CCIPR1_XSPI1SEL_0 /*!< PLL2 'S' output selection */ +#define RCC_XSPI1CLKSOURCE_PLL2T RCC_CCIPR1_XSPI1SEL_1 /*!< PLL2 'T' output selection */ +#define RCC_XSPI1CLKSOURCE_HCLK_DIV4 RCC_CKPROTR_XSPI1SWP_2 /*!< HCLK/4 selection (recovery position) */ +/** + * @} + */ + +/** @defgroup RCCEx_XSPI2_Clock_Source XSPI2 Clock Source + * @{ + */ +#define RCC_XSPI2CLKSOURCE_HCLK 0U /*!< HCLK selection (default) */ +#define RCC_XSPI2CLKSOURCE_PLL2S RCC_CCIPR1_XSPI2SEL_0 /*!< PLL2 'S' output selection */ +#define RCC_XSPI2CLKSOURCE_PLL2T RCC_CCIPR1_XSPI2SEL_1 /*!< PLL2 'T' output selection */ +#define RCC_XSPI2CLKSOURCE_HCLK_DIV4 RCC_CKPROTR_XSPI2SWP_2 /*!< HCLK/4 selection (recovery position) */ +/** + * @} + */ + +/** @defgroup RCCEx_CLKP_Clock_Source CLKP Clock Source + * @{ + */ +#define RCC_CLKPSOURCE_HSI 0U /*!< HSI selection (default) */ +#define RCC_CLKPSOURCE_CSI RCC_CCIPR1_CKPERSEL_0 /*!< CSI selection */ +#define RCC_CLKPSOURCE_HSE RCC_CCIPR1_CKPERSEL_1 /*!< HSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source + * @{ + */ +#define RCC_ADCCLKSOURCE_PLL2P 0U /*!< PLL2 'P' output selection (default) */ +#define RCC_ADCCLKSOURCE_PLL3R RCC_CCIPR1_ADCSEL_0 /*!< PLL3 'R' output selection */ +#define RCC_ADCCLKSOURCE_CLKP RCC_CCIPR1_ADCSEL_1 /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_ADF1_Clock_Source ADF1 Clock Source + * @{ + */ +#define RCC_ADF1CLKSOURCE_HCLK 0U /*!< HCLK selection (default) */ +#define RCC_ADF1CLKSOURCE_PLL2P RCC_CCIPR1_ADF1SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_ADF1CLKSOURCE_PLL3P RCC_CCIPR1_ADF1SEL_1 /*!< PLL3 'P' output selection */ +#define RCC_ADF1CLKSOURCE_PIN (RCC_CCIPR1_ADF1SEL_1 | RCC_CCIPR1_ADF1SEL_0) /*!< External I2S_PIN selection */ +#define RCC_ADF1CLKSOURCE_CSI RCC_CCIPR1_ADF1SEL_2 /*!< CSI selection */ +#define RCC_ADF1CLKSOURCE_HSI (RCC_CCIPR1_ADF1SEL_2 | RCC_CCIPR1_ADF1SEL_0) /*!< HSI selection */ +/** + * @} + */ + +/** @defgroup RCCEx_CEC_Clock_Source CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_LSE 0U /*!< LSE selection (default) */ +#define RCC_CECCLKSOURCE_LSI RCC_CCIPR2_CECSEL_0 /*!< LSI selection */ +#define RCC_CECCLKSOURCE_CSI RCC_CCIPR2_CECSEL_1 /*!< CSI divided by 122 selection */ +/** + * @} + */ + +/** @defgroup RCCEx_ETH1REF_Clock_Source ETH1 REF Clock Source + * @{ + */ +#define RCC_ETH1REFCLKSOURCE_PHY 0U /*!< ETH PHY selection (default) */ +#define RCC_ETH1REFCLKSOURCE_HSE RCC_CCIPR1_ETH1REFCKSEL_0 /*!< HSE selection */ +#define RCC_ETH1REFCLKSOURCE_ETH RCC_CCIPR1_ETH1REFCKSEL_1 /*!< ETH Feedback output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_ETH1PHY_Clock_Source ETH1 PHY Clock Source + * @{ + */ +#define RCC_ETH1PHYCLKSOURCE_HSE 0U /*!< HSE selection (default) */ +#define RCC_ETH1PHYCLKSOURCE_PLL3S RCC_CCIPR1_ETH1PHYCKSEL /*!< PLL3 'S' output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_FDCAN_Clock_Source FDCAN Kernel Clock Source + * @{ + */ +#define RCC_FDCANCLKSOURCE_HSE 0U /*!< HSE selection (default) */ +#define RCC_FDCANCLKSOURCE_PLL1Q RCC_CCIPR2_FDCANSEL_0 /*!< PLL1 'Q' output selection */ +#define RCC_FDCANCLKSOURCE_PLL2P RCC_CCIPR2_FDCANSEL_1 /*!< PLL2 'P' output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_I2C23_Clock_Source I2C2/I2C3 Clock Source + * @{ + */ +#define RCC_I2C23CLKSOURCE_PCLK1 0U /*!< PCLK1 selection (default) */ +#define RCC_I2C23CLKSOURCE_PLL3R RCC_CCIPR2_I2C23SEL_0 /*!< PLL3 'R' output selection */ +#define RCC_I2C23CLKSOURCE_HSI RCC_CCIPR2_I2C23SEL_1 /*!< HSI selection */ +#define RCC_I2C23CLKSOURCE_CSI (RCC_CCIPR2_I2C23SEL_1 | RCC_CCIPR2_I2C23SEL_0) /*!< CSI selection */ +/** + * @} + */ + +/** @defgroup RCCEx_I2C1_I3C1_Clock_Source I2C1/I3C1Clock Source + * @{ + */ +#define RCC_I2C1_I3C1CLKSOURCE_PCLK1 0U /*!< PCLK1 selection (default) */ +#define RCC_I2C1_I3C1CLKSOURCE_PLL3R RCC_CCIPR2_I2C1_I3C1SEL_0 /*!< PLL3 'R' output selection */ +#define RCC_I2C1_I3C1CLKSOURCE_HSI RCC_CCIPR2_I2C1_I3C1SEL_1 /*!< HSI selection */ +#define RCC_I2C1_I3C1CLKSOURCE_CSI (RCC_CCIPR2_I2C1_I3C1SEL_1 | RCC_CCIPR2_I2C1_I3C1SEL_0) /*!< CSI selection */ +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0U /*!< PCLK1 selection (default) */ +#define RCC_LPTIM1CLKSOURCE_PLL2P RCC_CCIPR2_LPTIM1SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_LPTIM1CLKSOURCE_PLL3R RCC_CCIPR2_LPTIM1SEL_1 /*!< PLL3 'R' output selection */ +#define RCC_LPTIM1CLKSOURCE_LSE (RCC_CCIPR2_LPTIM1SEL_1 | RCC_CCIPR2_LPTIM1SEL_0) /*!< LSE selection */ +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR2_LPTIM1SEL_2 /*!< LSI selection */ +#define RCC_LPTIM1CLKSOURCE_CLKP (RCC_CCIPR2_LPTIM1SEL_2 | RCC_CCIPR2_LPTIM1SEL_0) /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM23_Clock_Source LPTIM2/LPTIM3 Clock Source + * @{ + */ +#define RCC_LPTIM23CLKSOURCE_PCLK4 0U /*!< PCLK4 selection (default) */ +#define RCC_LPTIM23CLKSOURCE_PLL2P RCC_CCIPR4_LPTIM23SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_LPTIM23CLKSOURCE_PLL3R RCC_CCIPR4_LPTIM23SEL_1 /*!< PLL3 'R' output selection */ +#define RCC_LPTIM23CLKSOURCE_LSE (RCC_CCIPR4_LPTIM23SEL_1 | RCC_CCIPR4_LPTIM23SEL_0) /*!< LSE selection */ +#define RCC_LPTIM23CLKSOURCE_LSI RCC_CCIPR4_LPTIM23SEL_2 /*!< LSI selection */ +#define RCC_LPTIM23CLKSOURCE_CLKP (RCC_CCIPR4_LPTIM23SEL_2 | RCC_CCIPR4_LPTIM23SEL_0) /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM45_Clock_Source LPTIM4/LPTIM5 Clock Source + * @{ + */ +#define RCC_LPTIM45CLKSOURCE_PCLK4 0U /*!< PCLK4 selection (default) */ +#define RCC_LPTIM45CLKSOURCE_PLL2P RCC_CCIPR4_LPTIM45SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_LPTIM45CLKSOURCE_PLL3R RCC_CCIPR4_LPTIM45SEL_1 /*!< PLL3 'R' output selection */ +#define RCC_LPTIM45CLKSOURCE_LSE (RCC_CCIPR4_LPTIM45SEL_1 | RCC_CCIPR4_LPTIM45SEL_0) /*!< LSE selection */ +#define RCC_LPTIM45CLKSOURCE_LSI RCC_CCIPR4_LPTIM45SEL_2 /*!< LSI selection */ +#define RCC_LPTIM45CLKSOURCE_CLKP (RCC_CCIPR4_LPTIM45SEL_2 | RCC_CCIPR4_LPTIM45SEL_0) /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK4 0U /*!< PCLK4 selection (default) */ +#define RCC_LPUART1CLKSOURCE_PLL2Q RCC_CCIPR4_LPUART1SEL_0 /*!< PLL2 'Q' output selection */ +#define RCC_LPUART1CLKSOURCE_PLL3Q RCC_CCIPR4_LPUART1SEL_1 /*!< PLL2 'Q' output selection */ +#define RCC_LPUART1CLKSOURCE_HSI (RCC_CCIPR4_LPUART1SEL_1 | RCC_CCIPR4_LPUART1SEL_0) /*!< HSI selection */ +#define RCC_LPUART1CLKSOURCE_CSI RCC_CCIPR4_LPUART1SEL_2 /*!< CSI selection */ +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR4_LPUART1SEL_2 | RCC_CCIPR4_LPUART1SEL_0) /*!< LSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_LTDC_Clock_Source LTDC Clock Source + * @{ + */ +#define RCC_LTDCCLKSOURCE_PLL3R 0U /*!< PLL3 'R' output selection (unique) */ +/** + * @} + */ + +/** @defgroup RCCEx_PSSI_Clock_Source PSSI Clock Source + * @{ + */ +#define RCC_PSSICLKSOURCE_PLL3R 0U /*!< PLL3 'R' output selection (default) */ +#define RCC_PSSICLKSOURCE_CLKP RCC_CCIPR1_PSSISEL /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source + * @{ + */ +#define RCC_SAI1CLKSOURCE_PLL1Q 0U /*!< PLL1 'Q' output selection (default) */ +#define RCC_SAI1CLKSOURCE_PLL2P RCC_CCIPR3_SAI1SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_SAI1CLKSOURCE_PLL3P RCC_CCIPR3_SAI1SEL_1 /*!< PLL3 'P' output selection */ +#define RCC_SAI1CLKSOURCE_PIN (RCC_CCIPR3_SAI1SEL_1 | RCC_CCIPR3_SAI1SEL_0) /*!< I2S_PIN selection */ +#define RCC_SAI1CLKSOURCE_CLKP RCC_CCIPR3_SAI1SEL_2 /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SAI2_Clock_Source SAI2 Clock Source + * @{ + */ +#define RCC_SAI2CLKSOURCE_PLL1Q 0U /*!< PLL1 'Q' output selection (default) */ +#define RCC_SAI2CLKSOURCE_PLL2P RCC_CCIPR3_SAI2SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_SAI2CLKSOURCE_PLL3P RCC_CCIPR3_SAI2SEL_1 /*!< PLL3 'P' output selection */ +#define RCC_SAI2CLKSOURCE_PIN (RCC_CCIPR3_SAI2SEL_1 | RCC_CCIPR3_SAI2SEL_0) /*!< I2S_PIN selection */ +#define RCC_SAI2CLKSOURCE_CLKP RCC_CCIPR3_SAI2SEL_2 /*!< Clock peripheral output selection */ +#define RCC_SAI2CLKSOURCE_SPDIF (RCC_CCIPR3_SAI2SEL_2 | RCC_CCIPR3_SAI2SEL_0) /*!< SPDIF output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SDMMC12_Clock_Source SDMMC Clock Source + * @{ + */ +#define RCC_SDMMC12CLKSOURCE_PLL2S 0U /*!< PLL2 'S' output selection (default) */ +#define RCC_SDMMC12CLKSOURCE_PLL2T RCC_CCIPR1_SDMMC12SEL /*!< PLL2 'T' output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SPDIFRX_Clock_Source SPDIFRX Clock Source + * @{ + */ +#define RCC_SPDIFRXCLKSOURCE_PLL1Q 0U /*!< PLL1 'Q' output selection (default) */ +#define RCC_SPDIFRXCLKSOURCE_PLL2R RCC_CCIPR2_SPDIFRXSEL_0 /*!< PLL2 'R' output selection */ +#define RCC_SPDIFRXCLKSOURCE_PLL3R RCC_CCIPR2_SPDIFRXSEL_1 /*!< PLL3 'R' output selection */ +#define RCC_SPDIFRXCLKSOURCE_HSI RCC_CCIPR2_SPDIFRXSEL /*!< HSI selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SPI1_Clock_Source SPI1 Clock Source + * @{ + */ +#define RCC_SPI1CLKSOURCE_PLL1Q 0U /*!< PLL1 'Q' output selection (default) */ +#define RCC_SPI1CLKSOURCE_PLL2P RCC_CCIPR3_SPI1SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_SPI1CLKSOURCE_PLL3P RCC_CCIPR3_SPI1SEL_1 /*!< PLL3 'P' output selection */ +#define RCC_SPI1CLKSOURCE_PIN (RCC_CCIPR3_SPI1SEL_1 | RCC_CCIPR3_SPI1SEL_0) /*!< I2S_PIN selection */ +#define RCC_SPI1CLKSOURCE_CLKP RCC_CCIPR3_SPI1SEL_2 /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SPI23_Clock_Source SPI2/SPI3 Clock Source + * @{ + */ +#define RCC_SPI23CLKSOURCE_PLL1Q 0U /*!< PLL1 'Q' output selection (default) */ +#define RCC_SPI23CLKSOURCE_PLL2P RCC_CCIPR2_SPI23SEL_0 /*!< PLL2 'P' output selection */ +#define RCC_SPI23CLKSOURCE_PLL3P RCC_CCIPR2_SPI23SEL_1 /*!< PLL3 'P' output selection */ +#define RCC_SPI23CLKSOURCE_PIN (RCC_CCIPR2_SPI23SEL_1 | RCC_CCIPR2_SPI23SEL_0) /*!< I2S_PIN selection */ +#define RCC_SPI23CLKSOURCE_CLKP RCC_CCIPR2_SPI23SEL_2 /*!< Clock peripheral output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SPI45_Clock_Source SPI4/SPI5 Clock Source + * @{ + */ +#define RCC_SPI45CLKSOURCE_PCLK2 0U /*!< PCLK2 selection (default) */ +#define RCC_SPI45CLKSOURCE_PLL2Q RCC_CCIPR3_SPI45SEL_0 /*!< PLL2 'Q' output selection */ +#define RCC_SPI45CLKSOURCE_PLL3Q RCC_CCIPR3_SPI45SEL_1 /*!< PLL3 'Q' output selection */ +#define RCC_SPI45CLKSOURCE_HSI (RCC_CCIPR3_SPI45SEL_1 | RCC_CCIPR3_SPI45SEL_0) /*!< HSI selection */ +#define RCC_SPI45CLKSOURCE_CSI RCC_CCIPR3_SPI45SEL_2 /*!< CSI selection */ +#define RCC_SPI45CLKSOURCE_HSE (RCC_CCIPR3_SPI45SEL_2 | RCC_CCIPR3_SPI45SEL_0) /*!< HSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_SPI6_Clock_Source SPI6 Clock Source + * @{ + */ +#define RCC_SPI6CLKSOURCE_PCLK4 0U /*!< PCLK4 selection (default) */ +#define RCC_SPI6CLKSOURCE_PLL2Q RCC_CCIPR4_SPI6SEL_0 /*!< PLL2 'Q' output selection */ +#define RCC_SPI6CLKSOURCE_PLL3Q RCC_CCIPR4_SPI6SEL_1 /*!< PLL3 'Q' output selection */ +#define RCC_SPI6CLKSOURCE_HSI (RCC_CCIPR4_SPI6SEL_1 | RCC_CCIPR4_SPI6SEL_0) /*!< HSI selection */ +#define RCC_SPI6CLKSOURCE_CSI RCC_CCIPR4_SPI6SEL_2 /*!< CSI selection */ +#define RCC_SPI6CLKSOURCE_HSE (RCC_CCIPR4_SPI6SEL_2 | RCC_CCIPR4_SPI6SEL_0) /*!< HSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_TIM_Prescaler_Selection TIM Prescaler Selection + * @{ + */ +#define RCC_TIMPRES_DISABLE 0U /*!< Timers clocks prescaler not set (default) */ +#define RCC_TIMPRES_ENABLE RCC_CFGR_TIMPRE /*!< Timers clocks prescaler set */ + +/** + * @} + */ + +/** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK2 0U /*!< PCLK2 selection (default) */ +#define RCC_USART1CLKSOURCE_PLL2Q RCC_CCIPR3_USART1SEL_0 /*!< PLL2 'Q' output selection */ +#define RCC_USART1CLKSOURCE_PLL3Q RCC_CCIPR3_USART1SEL_1 /*!< PLL2 'Q' output selection */ +#define RCC_USART1CLKSOURCE_HSI (RCC_CCIPR3_USART1SEL_1 | RCC_CCIPR3_USART1SEL_0) /*!< HSI selection */ +#define RCC_USART1CLKSOURCE_CSI RCC_CCIPR3_USART1SEL_2 /*!< CSI selection */ +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR3_USART1SEL_2 | RCC_CCIPR3_USART1SEL_0) /*!< LSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_USART234578_Clock_Source USART2/USART3/UART4/UART5/UART7/UART8 Clock Source + * @{ + */ +#define RCC_USART234578CLKSOURCE_PCLK1 0U /*!< PCLK1 selection (default) */ +#define RCC_USART234578CLKSOURCE_PLL2Q RCC_CCIPR2_UART234578SEL_0 /*!< PLL2 'Q' output selection */ +#define RCC_USART234578CLKSOURCE_PLL3Q RCC_CCIPR2_UART234578SEL_1 /*!< PLL3 'Q' output selection */ +#define RCC_USART234578CLKSOURCE_HSI (RCC_CCIPR2_UART234578SEL_1 | RCC_CCIPR2_UART234578SEL_0) /*!< HSI selection */ +#define RCC_USART234578CLKSOURCE_CSI RCC_CCIPR2_UART234578SEL_2 /*!< CSI selection */ +#define RCC_USART234578CLKSOURCE_LSE (RCC_CCIPR2_UART234578SEL_2 | RCC_CCIPR2_UART234578SEL_0) /*!< LSE selection */ +/** + * @} + */ + +/** @defgroup RCCEx_USB_PHYC_Clock_Source USB PHYC Clock Source + * @{ + */ +#define RCC_USBPHYCCLKSOURCE_HSE 0U /*!< HSE selection (default) */ +#define RCC_USBPHYCCLKSOURCE_HSE_DIV2 RCC_CCIPR1_USBPHYCSEL_0 /*!< HSE div 2 selection */ +#define RCC_USBPHYCCLKSOURCE_PLL3Q RCC_CCIPR1_USBPHYCSEL_1 /*!< PLL3 'Q' output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_USB_OTGFS_Clock_Source USB OTG FS Clock Source + * @{ + */ +#define RCC_USBOTGFSCLKSOURCE_HSI48 0U /*!< HSI48 selection (default) */ +#define RCC_USBOTGFSCLKSOURCE_PLL3Q RCC_CCIPR1_OTGFSSEL_0 /*!< PLL3 'Q' output selection */ +#define RCC_USBOTGFSCLKSOURCE_HSE RCC_CCIPR1_OTGFSSEL_1 /*!< HSE selection */ +#define RCC_USBOTGFSCLKSOURCE_CLK48 RCC_CCIPR1_OTGFSSEL /*!< USBPHYC CLK48 output selection */ +/** + * @} + */ + +/** @defgroup RCCEx_Clock_Protection Clock Protection + * @{ + */ +#define RCC_CLOCKPROTECT_XSPI RCC_CKPROTR_XSPICKP /*!< XSPIs clock protection */ +#define RCC_CLOCKPROTECT_FMC RCC_CKPROTR_FMCCKP /*!< FMC clock protection */ +/** + * @} + */ + + +/** @defgroup RCCEx_EXTI_LINE_LSECSS LSE CSS external interrupt line + * @{ + */ +#define RCC_EXTI_LINE_LSECSS EXTI_IMR1_IM18 /*!< External interrupt line 18 connected to the LSE CSS EXTI Line */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Status CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB_OTG_FS CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB OTG FS SOF (default) */ +#define RCC_CRS_SYNC_SOURCE_USB_OTG_HS (CRS_CFGR_SYNCSRC_1|CRS_CFGR_SYNCSRC_0) /*!< Synchro Signal source USB OTG HS SOF */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault CRS HSI48CalibrationDefault + * @{ + */ +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U /*!< The default value is 32, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value corresponds + to a higher output frequency */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** @brief Macro to configure the ADC clock + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2P PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3R PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP CLKP Clock selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2P PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3R PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP CLKP Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ADCSEL))) + +/** @brief Macro to configure the ADF1 clock + * @param __ADF1_CLKSOURCE__ specifies the ADF1 clock source. + * This parameter can be one of the following values: + * @arg RCC_ADF1CLKSOURCE_HCLK HCLK Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PLL2P PLL2_P Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PLL3P PLL3_P Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PIN External I2S_CKIN selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_CSI CSI selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_HSI HSI selected as ADF1 clock + */ +#define __HAL_RCC_ADF1_CONFIG(__ADF1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ADF1SEL, (uint32_t)(__ADF1_CLKSOURCE__)) + +/** @brief Macro to get the ADF1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ADF1CLKSOURCE_HCLK HCLK Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PLL2P PLL2_P Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PLL3P PLL3_P Clock selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_PIN External I2S_CKIN selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_CSI CSI selected as ADF1 clock + * @arg RCC_ADF1CLKSOURCE_HSI HSI selected as ADF1 clock + */ +#define __HAL_RCC_GET_ADF1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ADF1SEL))) + +/** @brief Macro to configure the HDMI-CEC clock source. + * @param __CEC_CLKSOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI CSI divided by 122 selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) + +/** @brief Macro to get the HDMI-CEC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI CSI divided by 122 selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_CECSEL))) + +/** @brief Macro to configure the CLKP : Oscillator clock for peripheral + * @param __CLKP_CLKSOURCE__ specifies Oscillator clock for peripheral + * This parameter can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI HSI selected as peripheral clock (default) + * @arg RCC_CLKPSOURCE_CSI CSI selected as peripheral clock + * @arg RCC_CLKPSOURCE_HSE HSE selected as peripheral clock + */ +#define __HAL_RCC_CLKP_CONFIG(__CLKP_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_CKPERSEL, (uint32_t)(__CLKP_CLKSOURCE__)) + +/** @brief Macro to get the Oscillator clock for peripheral source. + * @retval The clock source can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI HSI selected as peripheral clock (default) + * @arg RCC_CLKPSOURCE_CSI CSI selected as peripheral clock + * @arg RCC_CLKPSOURCE_HSE HSE selected as peripheral clock + */ +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_CKPERSEL))) + +/** @brief Macro to configure the ETH1 REF clock source. + * @param __ETH1REF_CLKSOURCE__ specifies clock source for ETH1 REF + * This parameter can be one of the following values: + * @arg RCC_ETH1REFCLKSOURCE_PHY ETH PHY selected as ETH1 REF clock (default) + * @arg RCC_ETH1REFCLKSOURCE_HSE HSE selected as ETH1 clock + * @arg RCC_ETH1REFCLKSOURCE_ETH ETH feedback selected as ETH1 REF clock + */ +#define __HAL_RCC_ETH1REF_CONFIG(__ETH1REF_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ETH1REFCKSEL, (uint32_t)(__ETH1REF_CLKSOURCE__)) + +/** @brief Macro to get the ETH1 REF clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ETH1REFCLKSOURCE_PHY ETH PHY selected as ETH1 clock (default) + * @arg RCC_ETH1REFCLKSOURCE_HSE HSE selected as ETH1 clock + * @arg RCC_ETH1REFCLKSOURCE_ETH ETH feedback selected as ETH1 clock + */ +#define __HAL_RCC_GET_ETH1REF_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ETH1REFCKSEL))) + +/** @brief Macro to configure the ETH1 PHY clock source. + * @param __ETH1PHY_CLKSOURCE__ specifies clock source for ETH PHY + * This parameter can be one of the following values: + * @arg RCC_ETH1PHYCLKSOURCE_HSE HSE selected as ETH PHY clock (default) + * @arg RCC_ETH1PHYCLKSOURCE_PLL3S PLL3_S selected as ETH PHY clock + */ +#define __HAL_RCC_ETH1PHY_CONFIG(__ETH1PHY_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ETH1PHYCKSEL, (uint32_t)(__ETH1PHY_CLKSOURCE__)) + +/** @brief Macro to get the ETH1 PHY clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ETH1PHYCLKSOURCE_HSE HSE selected as ETH PHY clock (default) + * @arg RCC_ETH1PHYCLKSOURCE_PLL3S PLL3_S selected as ETH PHY clock + */ +#define __HAL_RCC_GET_ETH1PHY_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ETH1PHYCKSEL))) + +/** @brief Macro to configure the FDCAN kernel clock source. + * @param __FDCAN_CLKSOURCE__ specifies clock source for FDCAN kernel + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE HSE selected as FDCAN kernel clock (default) + * @arg RCC_FDCANCLKSOURCE_PLL1Q PLL1_Q selected as FDCAN kernel clock + * @arg RCC_FDCANCLKSOURCE_PLL2P PLL2_P selected as FDCAN kernel clock + */ +#define __HAL_RCC_FDCAN_CONFIG(__FDCAN_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__)) + +/** @brief Macro to get the FDCAN kernel clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE HSE selected as FDCAN kernel clock (default) + * @arg RCC_FDCANCLKSOURCE_PLL1Q PLL1_Q selected as FDCAN kernel clock + * @arg RCC_FDCANCLKSOURCE_PLL2P PLL2_P selected as FDCAN kernel clock + */ +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL))) + +/** @brief Macro to configure the FMC clock source. + * + * @param __FMC_CLKSOURCE__ specifies the FMC clock source. + * @arg RCC_FMCCLKSOURCE_HCLK HCLK Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_PLL1Q PLL1_Q Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_PLL2R PLL2_R Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_HSI HSI selected as FMC clock + */ +#define __HAL_RCC_FMC_CONFIG(__FMC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_FMCSEL, (uint32_t)(__FMC_CLKSOURCE__)) + +/** @brief Macro to get the FMC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_FMCCLKSOURCE_HCLK HCLK Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_PLL1Q PLL1_Q Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_PLL2R PLL2_R Clock selected as FMC clock + * @arg RCC_FMCCLKSOURCE_HSI HSI selected as FMC clock + * @arg RCC_FMCCLKSOURCE_HCLK_DIV4 Recovery Clock selected as FMC clock + */ +#define __HAL_RCC_GET_FMC_SOURCE() ((READ_BIT(RCC->CKPROTR, RCC_CKPROTR_FMCSWP) == RCC_FMCCLKSOURCE_HCLK_DIV4) ? \ + RCC_FMCCLKSOURCE_HCLK_DIV4 : ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_FMCSEL)))) + +/** @brief Macro to configure the I2C1/I3C1 clock source. + * @param __I2C1_I3C1_CLKSOURCE__ specifies the I2C1/I3C1clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C1_I3C1CLKSOURCE_PCLK1 APB1 selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_PLL3R PLL3_R selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_HSI HSI selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_CSI CSI selected as I2C1/I3C1clock + */ +#define __HAL_RCC_I2C1_I3C1_CONFIG(__I2C1_I3C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL, (uint32_t)(__I2C1_I3C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1/I3C1clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C1_I3C1CLKSOURCE_PCLK1 APB1 selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_PLL3R PLL3_R selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_HSI HSI selected as I2C1/I3C1clock + * @arg RCC_I2C1_I3C1CLKSOURCE_CSI CSI selected as I2C1/I3C1clock + */ +#define __HAL_RCC_GET_I2C1_I3C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL))) + +/** @brief Macro to configure the I2C2/I2C3 clock source. + * @param __I2C23_CLKSOURCE__ specifies the I2C2/I2C3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C23CLKSOURCE_PCLK1 APB1 selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_PLL3R PLL3_R selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_HSI HSI selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_CSI CSI selected as I2C2/I2C3 clock + */ +#define __HAL_RCC_I2C23_CONFIG(__I2C23_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C23SEL, (uint32_t)(__I2C23_CLKSOURCE__)) + +/** @brief Macro to get the I2C2/I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C23CLKSOURCE_PCLK1 APB1 selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_PLL3R PLL3_R selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_HSI HSI selected as I2C2/I2C3 clock + * @arg RCC_I2C23CLKSOURCE_CSI CSI selected as I2C2/I2C3 clock + */ +#define __HAL_RCC_GET_I2C23_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C23SEL))) + +/** @brief Macro to configure the I3C1 clock source. + * @param __I3C1_CLKSOURCE__ specifies the I3C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I3C1CLKSOURCE_PCLK1 APB1 selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_PLL3R PLL3_R selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_HSI HSI selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_CSI CSI selected as I3C1 clock + */ +#define __HAL_RCC_I3C1_CONFIG(__I3C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL, (uint32_t)(__I3C1_CLKSOURCE__)) + +/** @brief Macro to get the I3C1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I3C1CLKSOURCE_PCLK1 APB1 selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_PLL3R PLL3_R selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_HSI HSI selected as I3C1 clock + * @arg RCC_I3C1CLKSOURCE_CSI CSI selected as I3C1 clock + */ +#define __HAL_RCC_GET_I3C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL))) + +/** @brief Macro to configure the LPTIM1 clock source. + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1 APB1 clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2P PLL2_P selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3R PLL3_R selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP CLKP selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1 APB1 clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2P PLL2_P selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3R PLL3_R selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP CLKP selected as LPTIM1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_LPTIM1SEL))) + +/** @brief Macro to configure the LPTIM2/LPTIM3 clock source. + * @param __LPTIM23_CLKSOURCE__ specifies the LPTIM2/LPTIM3 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM23CLKSOURCE_PCLK4 APB4 clock selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_PLL2P PLL2_P selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_PLL3R PLL3_R selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_LSE LSE selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_LSI LSI Clock selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_CLKP CLKP selected as LPTIM2/LPTIM3 clock + */ +#define __HAL_RCC_LPTIM23_CONFIG(__LPTIM23_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR4, RCC_CCIPR4_LPTIM23SEL, (uint32_t)(__LPTIM23_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2/LPTIM3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM23CLKSOURCE_PCLK4 APB4 clock selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_PLL2P PLL2_P selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_PLL3R PLL3_R selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_LSE LSE selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_LSI LSI Clock selected as LPTIM2/LPTIM3 clock + * @arg RCC_LPTIM23CLKSOURCE_CLKP CLKP selected as LPTIM2/LPTIM3 clock + */ +#define __HAL_RCC_GET_LPTIM23_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR4, RCC_CCIPR4_LPTIM23SEL))) + +/** @brief Macro to configure the LPTIM4/LPTIM5 clock source. + * @param __LPTIM45_CLKSOURCE__ specifies the LPTIM4/LPTIM5 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM45CLKSOURCE_PCLK4 APB4 clock selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_PLL2P PLL2_P selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_PLL3R PLL3_R selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_LSE LSE selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_LSI LSI Clock selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_CLKP CLKP selected as LPTIM4/LPTIM5 clock + */ +#define __HAL_RCC_LPTIM45_CONFIG(__LPTIM45_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR4, RCC_CCIPR4_LPTIM45SEL, (uint32_t)(__LPTIM45_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM4/LPTIM5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM45CLKSOURCE_PCLK4 APB4 clock selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_PLL2P PLL2_P selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_PLL3R PLL3_R selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_LSE LSE selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_LSI LSI Clock selected as LPTIM4/LPTIM5 clock + * @arg RCC_LPTIM45CLKSOURCE_CLKP CLKP selected as LPTIM4/LPTIM5 clock + */ +#define __HAL_RCC_GET_LPTIM45_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR4, RCC_CCIPR4_LPTIM45SEL))) + +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_PCLK4 APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2Q PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3Q PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR4, RCC_CCIPR4_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_PCLK4 APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2Q PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3Q PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR4, RCC_CCIPR4_LPUART1SEL))) + +/** @brief Macro to get the LTDC clock source. + * @retval The clock source is internally connected to: + * @arg RCC_LTDCCLKSOURCE_PLL3R PLL3_R Clock selected as LTDC clock + */ +#define __HAL_RCC_GET_LTDC_SOURCE() RCC_LTDCCLKSOURCE_PLL3R + +/** @brief Macro to configure the XSPI1 clock source. + * + * @param __XSPI1_CLKSOURCE__ specifies the XSPI1 clock source. + * @arg RCC_XSPI1CLKSOURCE_HCLK HCLK Clock selected as XSPI1 clock + * @arg RCC_XSPI1CLKSOURCE_PLL2S PLL2_S Clock selected as XSPI1 clock + * @arg RCC_XSPI1CLKSOURCE_PLL2T PLL2_T Clock selected as XSPI1 clock + */ +#define __HAL_RCC_XSPI1_CONFIG(__XSPI1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_XSPI1SEL, (uint32_t)(__XSPI1_CLKSOURCE__)) + +/** @brief Macro to get the XSPI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_XSPI1CLKSOURCE_HCLK HCLK Clock selected as XSPI1 clock + * @arg RCC_XSPI1CLKSOURCE_PLL2S PLL2_S Clock selected as XSPI1 clock + * @arg RCC_XSPI1CLKSOURCE_PLL2T PLL2_T Clock selected as XSPI1 clock + * @arg RCC_XSPI1CLKSOURCE_HCLK_DIV4 Recovery Clock selected as XSPI1 clock + */ +#define __HAL_RCC_GET_XSPI1_SOURCE() ((READ_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPI1SWP) == RCC_XSPI1CLKSOURCE_HCLK_DIV4) ? \ + RCC_XSPI1CLKSOURCE_HCLK_DIV4 : ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_XSPI1SEL)))) + +/** @brief Macro to configure the XSPI2 clock source. + * + * @param __XSPI2_CLKSOURCE__ specifies the XSPI2 clock source. + * @arg RCC_XSPI2CLKSOURCE_HCLK HCLK Clock selected as XSPI2 clock + * @arg RCC_XSPI2CLKSOURCE_PLL2S PLL2_S Clock selected as XSPI2 clock + * @arg RCC_XSPI2CLKSOURCE_PLL2T PLL2_T Clock selected as XSPI2 clock + */ +#define __HAL_RCC_XSPI2_CONFIG(__XSPI2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_XSPI2SEL, (uint32_t)(__XSPI2_CLKSOURCE__)) + +/** @brief Macro to get the XSPI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_XSPI2CLKSOURCE_HCLK HCLK Clock selected as XSPI2 clock + * @arg RCC_XSPI2CLKSOURCE_PLL2S PLL2_S Clock selected as XSPI2 clock + * @arg RCC_XSPI2CLKSOURCE_PLL2T PLL2_T Clock selected as XSPI2 clock + * @arg RCC_XSPI2CLKSOURCE_HCLK_DIV4 Recovery Clock selected as XSPI2 clock + */ +#define __HAL_RCC_GET_XSPI2_SOURCE() ((READ_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPI2SWP) == RCC_XSPI2CLKSOURCE_HCLK_DIV4) ? \ + RCC_XSPI2CLKSOURCE_HCLK_DIV4 : ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_XSPI2SEL)))) + +/** + * @brief Macro to configure the PSSI clock source. + * @param __PSSI_CLKSOURCE__ defines the PSSI clock source. + * This parameter can be one of the following values: + * @arg RCC_PSSICLKSOURCE_PLL3R PLL3_R selected as PSSI clock + * @arg RCC_PSSICLKSOURCE_CLKP Peripheral clock selected as PSSI clock + * @retval None + */ +#define __HAL_RCC_PSSI_CONFIG(__PSSI_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_PSSISEL, (__PSSI_CLKSOURCE__)) + +/** @brief Macro to get the PSSI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_PSSICLKSOURCE_PLL3R PLL3_R selected as PSSI clock + * @arg RCC_PSSICLKSOURCE_CLKP Peripheral clock selected as PSSI clock + */ +#define __HAL_RCC_GET_PSSI_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_PSSISEL))) + +/** + * @brief Macro to configure the SAI1 clock source. + * @param __SAI1_CLKSOURCE__ defines the SAI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL1Q PLL1_Q selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PLL2P PLL2_P selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PLL3P PLL3_P selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PIN External I2S_CKIN selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_CLKP Peripheral clock selected as SAI1 clock + * @retval None + */ +#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_SAI1SEL, (__SAI1_CLKSOURCE__)) + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL1Q PLL1_Q selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PLL2P PLL2_P selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PLL3P PLL3_P selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_PIN External I2S_CKIN selected as SAI1 clock + * @arg RCC_SAI1CLKSOURCE_CLKP Peripheral clock selected as SAI1 clock + */ +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR3, RCC_CCIPR3_SAI1SEL))) + +/** + * @brief Macro to configure the SAI2 clock source. + * @param __SAI2_CLKSOURCE__ defines the SAI2 clock source. + * This parameter can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL1Q PLL1_Q selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PLL2P PLL2_P selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PLL3P PLL3_P selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PIN External I2S_CKIN selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_CLKP Peripheral clock selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_SPDIF SPDIF output clock selected as SAI2 clock + * @retval None + */ +#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_SAI2SEL, (__SAI2_CLKSOURCE__)) + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL1Q PLL1_Q selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PLL2P PLL2_P selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PLL3P PLL3_P selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_PIN External I2S_CKIN selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_CLKP Peripheral clock selected as SAI2 clock + * @arg RCC_SAI2CLKSOURCE_SPDIF SPDIF output clock selected as SAI2 clock + */ +#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR3, RCC_CCIPR3_SAI2SEL))) + + +/** @brief Macro to configure the SDMMC kernel clock source. + * @param __SDMMC12_CLKSOURCE__ specifies clock source for SDMMC + * This parameter can be one of the following values: + * @arg RCC_SDMMC12CLKSOURCE_PLL2S PLL2_S selected as SDMMC kernel clock + * @arg RCC_SDMMC12CLKSOURCE_PLL2T PLL2_R selected as SDMMC kernel clock + */ +#define __HAL_RCC_SDMMC12_CONFIG(__SDMMC12_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_SDMMC12SEL, (uint32_t)(__SDMMC12_CLKSOURCE__)) + +/** @brief Macro to get the SDMMC kernel clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SDMMC12CLKSOURCE_PLL2S PLL2_S selected as SDMMC12 kernel clock + * @arg RCC_SDMMC12CLKSOURCE_PLL2T PLL2_R selected as SDMMC12 kernel clock + */ +#define __HAL_RCC_GET_SDMMC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_SDMMC12SEL))) + +/** + * @brief Macro to Configure the SPDIFRX clock source. + * @param __SPDIFRX_CLKSOURCE__ defines the SPDIFRX clock source. + * This parameter can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLL1Q PLL1_Q selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_PLL2R PLL2_R selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_PLL3R PLL3_R selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_HSI HSI selected as SPDIFRX clock + * @retval None + */ +#define __HAL_RCC_SPDIFRX_CONFIG(__SPDIFRX_CLKSOURCE__ ) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SPDIFRXSEL, (__SPDIFRX_CLKSOURCE__)) + +/** + * @brief Macro to get the SPDIFRX clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLL1Q PLL1_Q selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_PLL2R PLL2_R selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_PLL3R PLL3_R selected as SPDIFRX clock + * @arg RCC_SPDIFRXCLKSOURCE_HSI HSI selected as SPDIFRX clock + * @retval None + */ +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SPDIFRXSEL))) + +/** + * @brief Macro to configure the SPI1 clock source. + * @param __SPI1_CLKSOURCE__ defines the SPI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL1Q PLL1_Q selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PLL2P PLL2_P selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PLL3P PLL3_P selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PIN External I2S_CKIN selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_CLKP Peripheral clock selected as SPI1 clock + * @retval None + */ +#define __HAL_RCC_SPI1_CONFIG(__SPI1_CLKSOURCE__ ) \ + MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_SPI1SEL, (__SPI1_CLKSOURCE__)) + +/** @brief Macro to get the SPI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL1Q PLL1_Q selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PLL2P PLL2_P selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PLL3P PLL3_P selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_PIN External I2S_CKIN selected as SPI1 clock + * @arg RCC_SPI1CLKSOURCE_CLKP Peripheral clock selected as SPI1 clock + */ +#define __HAL_RCC_GET_SPI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR3, RCC_CCIPR3_SPI1SEL))) + +/** + * @brief Macro to configure the SPI2/SPI3 clock source. + * @param __SPI23_CLKSOURCE__ defines the SPI2/SPI3 clock source. + * This parameter can be one of the following values: + * @arg RCC_SPI23CLKSOURCE_PLL1Q PLL1_Q selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PLL2P PLL2_P selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PLL3P PLL3_P selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PIN External I2S_CKIN selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_CLKP Peripheral clock selected as SPI2/SPI3 clock + * @retval None + */ +#define __HAL_RCC_SPI23_CONFIG(__SPI23_CLKSOURCE__ ) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SPI23SEL, (__SPI23_CLKSOURCE__)) + +/** @brief Macro to get the SPI2/SPI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI23CLKSOURCE_PLL1Q PLL1_Q selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PLL2P PLL2_P selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PLL3P PLL3_P selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_PIN External I2S_CKIN selected as SPI2/SPI3 clock + * @arg RCC_SPI23CLKSOURCE_CLKP Peripheral clock selected as SPI2/SPI3 clock + */ +#define __HAL_RCC_GET_SPI23_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SPI23SEL))) + +/** + * @brief Macro to configure the SPI4/SPI5 clock source. + * @param __SPI45_CLKSOURCE__ defines the SPI4/SPI5 clock source. + * This parameter can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_PCLK2 APB2 Clock selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_PLL2Q PLL2_Q selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_PLL3Q PLL3_Q selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_HSI HSI selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_CSI CSI selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_HSE HSE selected as SPI4/SPI5 clock + * @retval None + */ +#define __HAL_RCC_SPI45_CONFIG(__SPI45_CLKSOURCE__ ) \ + MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_SPI45SEL, (__SPI45_CLKSOURCE__)) + +/** @brief Macro to get the SPI4/SPI5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_PCLK2 APB2 Clock selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_PLL2Q PLL2_Q selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_PLL3Q PLL3_Q selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_HSI HSI selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_CSI CSI selected as SPI4/SPI5 clock + * @arg RCC_SPI45CLKSOURCE_HSE HSE selected as SPI4/SPI5 clock + */ +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR3, RCC_CCIPR3_SPI45SEL))) + +/** + * @brief Macro to configure the SPI6 clock source. + * @param __SPI6_CLKSOURCE__ defines the SPI6 clock source. + * This parameter can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_PCLK4 APB4 Clock selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_PLL2Q PLL2_Q selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_PLL3Q PLL3_Q selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_HSI HSI selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_CSI CSI selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_HSE HSE selected as SPI6 clock + * @retval None + */ +#define __HAL_RCC_SPI6_CONFIG(__SPI6_CLKSOURCE__ ) \ + MODIFY_REG(RCC->CCIPR4, RCC_CCIPR4_SPI6SEL, (__SPI6_CLKSOURCE__)) + +/** @brief Macro to get the SPI6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_PCLK4 APB4 Clock selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_PLL2Q PLL2_Q selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_PLL3Q PLL3_Q selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_HSI HSI selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_CSI CSI selected as SPI6 clock + * @arg RCC_SPI6CLKSOURCE_HSE HSE selected as SPI6 clock + */ +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR4, RCC_CCIPR4_SPI6SEL))) + +/** @brief Macro to configure the USART1 clock source. + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART1CLKSOURCE_PCLK2 APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2Q PLL2_Q selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3Q PLL3_Q selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI CSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR3, RCC_CCIPR3_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1/6/9* /10* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART1CLKSOURCE_PCLK2 APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2Q PLL2_Q selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3Q PLL3_Q selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI CSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR3, RCC_CCIPR3_USART1SEL))) + +/** @brief Macro to configure the USART2/USART3/UART4/UART5/UART7/UART8 clock source. + * @param __USART234578_CLKSOURCE__ specifies the USART2/UART3/UART4/UART5/UART7/UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_PCLK1 APB1 Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2Q PLL2_Q Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3Q PLL3_Q Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_HSI HSI selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_CSI CSI Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_LSE LSE selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + */ +#define __HAL_RCC_USART234578_CONFIG(__USART234578_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_UART234578SEL, (uint32_t)(__USART234578_CLKSOURCE__)) + +/** @brief Macro to get the USART2/USART3/UART4/UART5/UART7/UART8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_PCLK1 APB1 Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2Q PLL2_Q Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3Q PLL3_Q Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_HSI HSI selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_CSI CSI Clock selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + * @arg RCC_USART234578CLKSOURCE_LSE LSE selected as USART2/USART3/UART4/UART5/UART7/UART8 clock + */ +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_UART234578SEL))) + +/** @brief Macro to configure the Timers clocks prescalers + * @param __PRESC__ specifies the Timers clocks prescalers selection + * This parameter can be one of the following values: + * @arg RCC_TIMPRES_DISABLE + * The timers kernel clock is equal to: + * - PCLKx_freq, if PCLKx = RCC_APBx_DIV1 + * - 2*PCLKx_freq, otherwise (default after reset) + * @arg RCC_TIMPRES_ENABLE + * The timers kernel clock is equal to: + * - PCLKx_freq, if PCLKx = RCC_APBx_DIV1 + * - 2*PCLKx_freq, if PCLKx = RCC_APBx_DIV2 + * - 4*PCLKx_freq, otherwise + */ +#define __HAL_RCC_TIMCLKPRESCALER_CONFIG(__PRESC__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_TIMPRE, (uint32_t)(__PRESC__)) + +/** @brief Macro to get the Timers clocks prescalers + * @retval The parameter can be one of the following values: + * @arg RCC_TIMPRES_DISABLE + * The timers kernel clock is equal to: + * - PCLKx_freq, if PCLKx = RCC_APBx_DIV1 + * - 2*PCLKx_freq, otherwise (default after reset) + * @arg RCC_TIMPRES_ENABLE + * The timers kernel clock is equal to: + * - PCLKx_freq, if PCLKx = RCC_APBx_DIV1 + * - 2*PCLKx_freq, if PCLKx = RCC_APBx_DIV2 + * - 4*PCLKx_freq, otherwise + */ +#define __HAL_RCC_GET_TIMCLKPRESCALER() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_TIMPRE))) + +/** @brief Macro to configure the USBPHYC clock. + * @param __USBPHYC_CLKSOURCE__ specifies the USBPHYC clock source. + * This parameter can be one of the following values: + * @arg RCC_USBPHYCCLKSOURCE_HSE HSE selected as USBPHYC clock + * @arg RCC_USBPHYCCLKSOURCE_HSE_DIV2 HSE divided by 2 selected as USBPHYC clock + * @arg RCC_USBPHYCCLKSOURCE_PLL3Q PLL3_Q Clock selected as USBPHYC clock + */ +#define __HAL_RCC_USBPHYC_CONFIG(__USBPHYC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_USBPHYCSEL, (uint32_t)(__USBPHYC_CLKSOURCE__)) + +/** @brief Macro to get the USBPHYC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USBPHYCCLKSOURCE_HSE HSE selected as USBPHYC clock + * @arg RCC_USBPHYCCLKSOURCE_HSE_DIV2 HSE divided by 2 selected as USBPHYC clock + * @arg RCC_USBPHYCCLKSOURCE_PLL3Q PLL3_Q Clock selected as USBPHYC clock + */ +#define __HAL_RCC_GET_USBPHYC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_USBPHYCSEL))) + +/** @brief Macro to configure the USB OTGFS clock. + * @param __USBOTGFS_CLKSOURCE__ specifies the USB OTGFS clock source. + * This parameter can be one of the following values: + * @arg RCC_USBOTGFSCLKSOURCE_HSI48 HSI48 selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_PLL3Q PLL3_Q Clock selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_HSE HSI48 selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_CLK48 USBPHYC CLK48 output selected as USB OTGFS clock + */ +#define __HAL_RCC_USBOTGFS_CONFIG(__USBOTGFS_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_OTGFSSEL, (uint32_t)(__USBOTGFS_CLKSOURCE__)) + +/** @brief Macro to get the USB OTGFS clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USBOTGFSCLKSOURCE_HSI48 HSI48 selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_PLL3Q PLL3_Q Clock selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_HSE HSI48 selected as USB OTGFS clock + * @arg RCC_USBOTGFSCLKSOURCE_CLK48 USBPHYC CLK48 output selected as USB OTGFS clock + */ +#define __HAL_RCC_GET_USBOTGFS_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_OTGFSSEL))) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF |\ + RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF |\ + RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +/** @defgroup RCCEx_CRS_Extended_Features CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after pre-scaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(const RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); +void HAL_RCCEx_EnableClockProtection(uint32_t ProtectClk); +void HAL_RCCEx_DisableClockProtection(uint32_t ProtectClk); +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ +void HAL_RCCEx_CRSConfig(const RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +/** @defgroup RCCEx_IS_RCC_Definitions Private macros to check input parameters + * @{ + */ + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_FMC) == RCC_PERIPHCLK_FMC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_XSPI1) == RCC_PERIPHCLK_XSPI1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_XSPI2) == RCC_PERIPHCLK_XSPI2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CKPER) == RCC_PERIPHCLK_CKPER) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADF1) == RCC_PERIPHCLK_ADF1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ETH1REF) == RCC_PERIPHCLK_ETH1REF) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ETH1PHY) == RCC_PERIPHCLK_ETH1PHY) || \ + (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1_I3C1) == RCC_PERIPHCLK_I2C1_I3C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C23) == RCC_PERIPHCLK_I2C23) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM23) == RCC_PERIPHCLK_LPTIM23) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM45) == RCC_PERIPHCLK_LPTIM45) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_PSSI) == RCC_PERIPHCLK_PSSI) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SDMMC12) == RCC_PERIPHCLK_SDMMC12) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SPI1) == RCC_PERIPHCLK_SPI1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SPI23) == RCC_PERIPHCLK_SPI23) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SPI45) == RCC_PERIPHCLK_SPI45) || \ + (((__SELECTION__) & RCC_PERIPHCLK_SPI6) == RCC_PERIPHCLK_SPI6) || \ + (((__SELECTION__) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USART234578) == RCC_PERIPHCLK_USART234578) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USBPHYC) == RCC_PERIPHCLK_USBPHYC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USBOTGFS) == RCC_PERIPHCLK_USBOTGFS)) + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_CLKP)) + +#define IS_RCC_ADF1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADF1CLKSOURCE_HCLK) || \ + ((__SOURCE__) == RCC_ADF1CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_ADF1CLKSOURCE_PLL3P) || \ + ((__SOURCE__) == RCC_ADF1CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_ADF1CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_ADF1CLKSOURCE_HSI)) + +#define IS_RCC_CECCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_CECCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_CECCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_CECCLKSOURCE_CSI)) + +#define IS_RCC_CKPERCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_CLKPSOURCE_HSI) || \ + ((__SOURCE__) == RCC_CLKPSOURCE_CSI) || \ + ((__SOURCE__) == RCC_CLKPSOURCE_HSE)) + +#define IS_RCC_ETH1REFCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ETH1REFCLKSOURCE_PHY) || \ + ((__SOURCE__) == RCC_ETH1REFCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_ETH1REFCLKSOURCE_ETH)) + +#define IS_RCC_ETH1PHYCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ETH1PHYCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_ETH1PHYCLKSOURCE_PLL3S)) + +#define IS_RCC_FDCANCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL2P)) + +#define IS_RCC_FMCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_FMCCLKSOURCE_HCLK) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL2R) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_HSI)) + +#define IS_RCC_I2C1_I3C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1_I3C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1_I3C1CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_I2C1_I3C1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2C1_I3C1CLKSOURCE_CSI)) + +#define IS_RCC_I2C23CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C23CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C23CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_I2C23CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2C23CLKSOURCE_CSI)) + +#define IS_RCC_I3C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I3C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I3C1CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_I3C1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I3C1CLKSOURCE_CSI)) + +#define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM23CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM23CLKSOURCE_PCLK4) || \ + ((__SOURCE__) == RCC_LPTIM23CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_LPTIM23CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_LPTIM23CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPTIM23CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM23CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM45CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM45CLKSOURCE_PCLK4) || \ + ((__SOURCE__) == RCC_LPTIM45CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_LPTIM45CLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_LPTIM45CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPTIM45CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM45CLKSOURCE_CLKP)) + +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK4) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_PLL2Q) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE)) + +#define IS_RCC_LTDCCLKSOURCE(__SOURCE__) \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLL3R) + +#define IS_RCC_XSPI1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_XSPI1CLKSOURCE_HCLK) || \ + ((__SOURCE__) == RCC_XSPI1CLKSOURCE_PLL2S) || \ + ((__SOURCE__) == RCC_XSPI1CLKSOURCE_PLL2T)) + +#define IS_RCC_XSPI2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_XSPI2CLKSOURCE_HCLK) || \ + ((__SOURCE__) == RCC_XSPI2CLKSOURCE_PLL2S) || \ + ((__SOURCE__) == RCC_XSPI2CLKSOURCE_PLL2T)) + +#define IS_RCC_PSSICLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_PSSICLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_PSSICLKSOURCE_CLKP)) + +#define IS_RCC_SAI1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL3P) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#define IS_RCC_SAI2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL3P) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_SPDIF)) + +#define IS_RCC_SDMMC12CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC12CLKSOURCE_PLL2S) || \ + ((__SOURCE__) == RCC_SDMMC12CLKSOURCE_PLL2T)) + +#define IS_RCC_SPDIFRXCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SPDIFRXCLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_SPDIFRXCLKSOURCE_PLL2R) || \ + ((__SOURCE__) == RCC_SPDIFRXCLKSOURCE_PLL3R) || \ + ((__SOURCE__) == RCC_SPDIFRXCLKSOURCE_HSI)) + +#define IS_RCC_SPI1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL3P) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_CLKP)) + +#define IS_RCC_SPI23CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI23CLKSOURCE_PLL1Q) || \ + ((__SOURCE__) == RCC_SPI23CLKSOURCE_PLL2P) || \ + ((__SOURCE__) == RCC_SPI23CLKSOURCE_PLL3P) || \ + ((__SOURCE__) == RCC_SPI23CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SPI23CLKSOURCE_CLKP)) + +#define IS_RCC_SPI45CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI45CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL2Q) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSE)) + +#define IS_RCC_SPI6CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_PCLK4) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2Q) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE)) + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_PLL2Q) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE)) + +#define IS_RCC_USART234578CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART234578CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART234578CLKSOURCE_PLL2Q) || \ + ((__SOURCE__) == RCC_USART234578CLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_USART234578CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_USART234578CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART234578CLKSOURCE_CSI)) + +#define IS_RCC_USBPHYCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBPHYCCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_USBPHYCCLKSOURCE_HSE_DIV2) || \ + ((__SOURCE__) == RCC_USBPHYCCLKSOURCE_PLL3Q)) + +#define IS_RCC_USBOTGFSCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBOTGFSCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBOTGFSCLKSOURCE_PLL3Q) || \ + ((__SOURCE__) == RCC_USBOTGFSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_USBOTGFSCLKSOURCE_CLK48)) + +#define IS_RCC_TIMCLKPRESCALER(__VALUE__) \ + (((__VALUE__) == RCC_TIMPRES_DISABLE) || \ + ((__VALUE__) == RCC_TIMPRES_ENABLE)) + +#define IS_RCC_CLOCKPROTECTION(__CLOCK__) \ + ((((__CLOCK__) & RCC_CLOCKPROTECT_FMC) == RCC_CLOCKPROTECT_FMC) || \ + (((__CLOCK__) & RCC_CLOCKPROTECT_XSPI) == RCC_CLOCKPROTECT_XSPI) || \ + (((__CLOCK__) & ~(RCC_CLOCKPROTECT_FMC | RCC_CLOCKPROTECT_XSPI)) == 0U)) + + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB_OTG_FS) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB_OTG_HS) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) ((__VALUE__) <= CRS_CFGR_RELOAD) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) ((__VALUE__) <= (CRS_CFGR_FELIM >> CRS_CFGR_FELIM_Pos)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) ((__VALUE__) <= (CRS_CR_TRIM >> CRS_CR_TRIM_Pos)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_RCC_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng.h new file mode 100644 index 000000000..d1bd18896 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng.h @@ -0,0 +1,389 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rng.h + * @author MCD Application Team + * @brief Header file of RNG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RNG_H +#define STM32H7RSxx_HAL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG RNG + * @brief RNG HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Types RNG Exported Types + * @{ + */ + +/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition + * @{ + */ +typedef struct +{ + uint32_t ClockErrorDetection; /*!< CED Clock error detection */ +} RNG_InitTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition + * @{ + */ +typedef enum +{ + HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ + HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ + HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ + HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ + HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ + +} HAL_RNG_StateTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition + * @{ + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +typedef struct __RNG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ +{ + RNG_TypeDef *Instance; /*!< Register base address */ + + RNG_InitTypeDef Init; /*!< RNG configuration parameters */ + + HAL_LockTypeDef Lock; /*!< RNG locking object */ + + __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ + + __IO uint32_t ErrorCode; /*!< RNG Error code */ + + uint32_t RandomNumber; /*!< Last Generated RNG Data */ + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */ + void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */ + + void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */ + void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +} RNG_HandleTypeDef; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RNG Callback ID enumeration definition + */ +typedef enum +{ + HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */ + + HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */ + HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */ + +} HAL_RNG_CallbackIDTypeDef; + +/** + * @brief HAL RNG Callback pointer definition + */ +typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */ +typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */ + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition + * @{ + */ +#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ +#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ +#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ +/** + * @} + */ + +/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition + * @{ + */ +#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ +#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ +#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ +/** + * @} + */ + +/** @defgroup RNG_Exported_Constants_Group3 RNG Clock Error Detection + * @{ + */ +#define RNG_CED_ENABLE 0x00000000U /*!< Clock error detection Enabled */ +#define RNG_CED_DISABLE RNG_CR_CED /*!< Clock error detection Disabled */ +/** + * @} + */ + +/** @defgroup RNG_Error_Definition RNG Error Definition + * @{ + */ +#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ +#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ +#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ +#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ +#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RNG_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @brief Reset RNG handle state + * @param __HANDLE__ RNG Handle + * @retval None + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_RNG_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @brief Enables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) + +/** + * @brief Disables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) + +/** + * @brief Check the selected RNG flag status. + * @param __HANDLE__ RNG Handle + * @param __FLAG__ RNG flag + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data ready + * @arg RNG_FLAG_CECS: Clock error current status + * @arg RNG_FLAG_SECS: Seed error current status + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clears the selected RNG flag status. + * @param __HANDLE__ RNG handle + * @param __FLAG__ RNG flag to clear + * @note WARNING: This is a dummy macro for HAL code alignment, + * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. + * @retval None + */ +#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ + +/** + * @brief Enables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) + +/** + * @brief Disables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) + +/** + * @brief Checks whether the specified RNG interrupt has occurred or not. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to check. + * This parameter can be one of the following values: + * @arg RNG_IT_DRDY: Data ready interrupt + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clear the RNG interrupt status flags. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to clear. + * This parameter can be one of the following values: + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. + * @retval None + */ +#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) + +/** + * @} + */ + +/* Include RNG HAL Extended module */ +#include "stm32h7rsxx_hal_rng_ex.h" +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Functions RNG Exported Functions + * @{ + */ + +/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, + pRNG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng); + +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); +void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); +void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit); + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_GetError(const RNG_HandleTypeDef *hrng); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_Private_Macros RNG Private Macros + * @{ + */ +#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ + ((IT) == RNG_IT_SEI)) + +#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ + ((FLAG) == RNG_FLAG_CECS) || \ + ((FLAG) == RNG_FLAG_SECS)) + +/** + * @brief Verify the RNG Clock Error Detection mode. + * @param __MODE__ RNG Clock Error Detection mode + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_RNG_CED(__MODE__) (((__MODE__) == RNG_CED_ENABLE) || \ + ((__MODE__) == RNG_CED_DISABLE)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RNG_Private_Functions RNG Private functions + * @{ + */ +HAL_StatusTypeDef RNG_RecoverSeedError(RNG_HandleTypeDef *hrng); +/** + * @} + */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_RNG_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng_ex.h new file mode 100644 index 000000000..194b82d51 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rng_ex.h @@ -0,0 +1,263 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rng_ex.h + * @author MCD Application Team + * @brief Header file of RNG HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RNG_EX_H +#define STM32H7RSxx_HAL_RNG_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(RNG) +#if defined(RNG_CR_CONDRST) + +/** @defgroup RNG_Ex RNG_Ex + * @brief RNG Extension HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RNG_Ex_Exported_Types RNG_Ex Exported Types + * @brief RNG_Ex Exported types + * @{ + */ + +/** + * @brief RNG_Ex Configuration Structure definition + */ + +typedef struct +{ + uint32_t Config1; /*!< Config1 must be a value between 0 and 0x3F */ + uint32_t Config2; /*!< Config2 must be a value between 0 and 0x7 */ + uint32_t Config3; /*!< Config3 must be a value between 0 and 0xF */ + uint32_t ClockDivider; /*!< Clock Divider factor.This parameter can + be a value of @ref RNG_Ex_Clock_Divider_Factor */ + uint32_t NistCompliance; /*!< NIST compliance.This parameter can be a + value of @ref RNG_Ex_NIST_Compliance */ + uint32_t AutoReset; /*!< automatic reset When a noise source error occurs + value of @ref RNG_Ex_Auto_Reset */ + uint32_t HealthTest; /*!< RNG health test control must be a value + between 0x0FFCABFF and 0x00005200 */ +} RNG_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_Ex_Exported_Constants RNG_Ex Exported Constants + * @{ + */ + +/** @defgroup RNG_Ex_Clock_Divider_Factor Value used to configure an internal + * programmable divider acting on the incoming RNG clock + * @{ + */ +#define RNG_CLKDIV_BY_1 (0x00000000UL) /*!< No clock division */ +#define RNG_CLKDIV_BY_2 (RNG_CR_CLKDIV_0) +/*!< 2 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_4 (RNG_CR_CLKDIV_1) +/*!< 4 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_8 (RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) +/*!< 8 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_16 (RNG_CR_CLKDIV_2) +/*!< 16 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_32 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0) +/*!< 32 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_64 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1) +/*!< 64 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_128 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) +/*!< 128 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_256 (RNG_CR_CLKDIV_3) +/*!< 256 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_512 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_0) +/*!< 512 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_1024 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1) +/*!< 1024 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_2048 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) +/*!< 2048 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_4096 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2) +/*!< 4096 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_8192 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0) +/*!< 8192 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_16384 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1) +/*!< 16384 RNG clock cycles per internal RNG clock */ +#define RNG_CLKDIV_BY_32768 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) +/*!< 32768 RNG clock cycles per internal RNG clock */ +/** + * @} + */ + +/** @defgroup RNG_Ex_NIST_Compliance NIST Compliance configuration + * @{ + */ +#define RNG_NIST_COMPLIANT (0x00000000UL) /*!< NIST compliant configuration*/ +#define RNG_CUSTOM_NIST (RNG_CR_NISTC) /*!< Custom NIST configuration */ + +/** + * @} + */ +/** @defgroup RNG_Ex_Auto_Reset Auto Reset configuration + * @{ + */ +#define RNG_ARDIS_ENABLE (0x00000000UL) /*!< automatic reset after seed error*/ +#define RNG_ARDIS_DISABLE (RNG_CR_ARDIS) /*!< Disable automatic reset after seed error */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup RNG_Ex_Private_Types RNG_Ex Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RNG_Ex_Private_Variables RNG_Ex Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RNG_Ex_Private_Constants RNG_Ex Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_Ex_Private_Macros RNG_Ex Private Macros + * @{ + */ + +#define IS_RNG_CLOCK_DIVIDER(__CLOCK_DIV__) (((__CLOCK_DIV__) == RNG_CLKDIV_BY_1) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_2) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_4) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_8) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_16) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_32) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_64) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_128) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_256) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_512) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_1024) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_2048) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_4096) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_8192) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_16384) || \ + ((__CLOCK_DIV__) == RNG_CLKDIV_BY_32768)) + + +#define IS_RNG_NIST_COMPLIANCE(__NIST_COMPLIANCE__) (((__NIST_COMPLIANCE__) == RNG_NIST_COMPLIANT) || \ + ((__NIST_COMPLIANCE__) == RNG_CUSTOM_NIST)) + +#define IS_RNG_CONFIG1(__CONFIG1__) ((__CONFIG1__) <= 0x3FUL) + +#define IS_RNG_CONFIG2(__CONFIG2__) ((__CONFIG2__) <= 0x07UL) + +#define IS_RNG_CONFIG3(__CONFIG3__) ((__CONFIG3__) <= 0xFUL) +#define IS_RNG_ARDIS(__ARDIS__) (((__ARDIS__) == RNG_ARDIS_ENABLE) || \ + ((__ARDIS__) == RNG_ARDIS_DISABLE)) + + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RNG_Ex_Private_Functions RNG_Ex Private Functions + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RNG_Ex_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_Ex_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, const RNG_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng); + +/** + * @} + */ + +/** @addtogroup RNG_Ex_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RNGEx_RecoverSeedError(RNG_HandleTypeDef *hrng); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG_CR_CONDRST */ +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_RNG_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc.h new file mode 100644 index 000000000..1b9805d1a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc.h @@ -0,0 +1,977 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RTC_H +#define STM32H7RSxx_HAL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ + +} HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTCEx_Output_selection_Definitions */ + + uint32_t OutPutRemap; /*!< Specifies the remap for RTC output. + This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ + + uint32_t OutPutPullUp; /*!< Specifies the RTC Output Pull-Up mode. + This parameter can be a value of @ref RTC_Output_PullUp_ALARM_OUT */ + + uint32_t BinMode; /*!< Specifies the RTC binary mode. + This parameter can be a value of @ref RTCEx_Binary_Mode */ + + uint32_t BinMixBcdU; /*!< Specifies the BCD calendar update if and only if BinMode = RTC_BINARY_MIX. + This parameter can be a value of @ref RTCEx_Binary_mix_BCDU */ +} RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between: + Min_Data = 0 and Max_Data = 12 if the RTC_HOURFORMAT_12 is selected. + This parameter must be a number between: + Min_Data = 0 and Max_Data = 23 if the RTC_HOURFORMAT_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This field is not used by HAL_RTC_SetTime. + If the free running 32 bit counter is not activated (mode binary none) + - This parameter corresponds to a time unit range + between [0-1] Second with [1 Sec / SecondFraction +1] granularity + else + - This parameter corresponds to the free running 32 bit counter. */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous pre-scaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ + + uint32_t DayLightSaving; /*!< This interface is deprecated. + To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */ + + uint32_t StoreOperation; /*!< This interface is deprecated. + To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */ +} RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ +} RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + if Binary mode is RTC_BINARY_ONLY or is RTC_BINARY_MIX + This parameter can be a value of + @ref RTCEx_Alarm_Sub_Seconds_binary_Masks_Definitions + else if Binary mode is RTC_BINARY_NONE + This parameter can be a value of + @ref RTC_Alarm_Sub_Seconds_BCD_Masks_Definitions */ + + uint32_t BinaryAutoClr; /*!< Clear synchronously counter (RTC_SSR) on binary alarm. + RTC_ALARMSUBSECONDBIN_AUTOCLR_YES must only be used if Binary mode + is RTC_BINARY_ONLY + This parameter can be a value of + @ref RTCEx_Alarm_Sub_Seconds_binary_Clear_Definitions */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value + in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of + @ref RTC_WeekDay_Definitions */ + + uint32_t FlagAutoClr; /*!< Specifies the alarm trigger generation. This feature is meaningful + to avoid any RTC software execution after configuration. + This parameter can be a value of @ref RTC_ALARM_Flag_AutoClear_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm. + This parameter can be a value of @ref RTC_Alarms_Definitions */ +} RTC_AlarmTypeDef; + +/** + * @brief RTC Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ +{ + RTC_TypeDef *Instance; /*!< Legacy register base address. Not used anymore, the driver directly uses cmsis base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ + void (* AlarmBEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm B Event callback */ + void (* TimeStampEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC TimeStamp Event callback */ + void (* WakeUpTimerEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC WakeUpTimer Event callback */ + void (* SSRUEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC SSRU Event callback */ + void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */ + void (* Tamper2EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 2 Event callback */ + void (* Tamper3EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 3 Event callback */ + void (* Tamper4EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 4 Event callback */ + void (* Tamper5EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 5 Event callback */ + void (* Tamper6EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 6 Event callback */ + void (* Tamper7EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 7 Event callback */ + void (* Tamper8EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 8 Event callback */ + void (* InternalTamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 1 Event callback */ + void (* InternalTamper2EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 2 Event callback */ + void (* InternalTamper3EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 3 Event callback */ + void (* InternalTamper4EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 4 Event callback */ + void (* InternalTamper5EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 5 Event callback */ + void (* InternalTamper6EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 6 Event callback */ + void (* InternalTamper7EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 7 Event callback */ + void (* InternalTamper8EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 8 Event callback */ + void (* InternalTamper9EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 9 Event callback */ + void (* InternalTamper11EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 11 Event callback */ + void (* InternalTamper15EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Internal Tamper 15 Event callback */ + void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ + void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + +} RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0U, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_ALARM_B_EVENT_CB_ID = 1U, /*!< RTC Alarm B Event Callback ID */ + HAL_RTC_TIMESTAMP_EVENT_CB_ID = 2U, /*!< RTC TimeStamp Event Callback ID */ + HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 3U, /*!< RTC WakeUp Timer Event Callback ID */ + HAL_RTC_SSRU_EVENT_CB_ID = 4U, /*!< RTC SSRU Event Callback ID */ + HAL_RTC_TAMPER1_EVENT_CB_ID = 5U, /*!< RTC Tamper 1 Callback ID */ + HAL_RTC_TAMPER2_EVENT_CB_ID = 6U, /*!< RTC Tamper 2 Callback ID */ + HAL_RTC_TAMPER3_EVENT_CB_ID = 7U, /*!< RTC Tamper 3 Callback ID */ + HAL_RTC_TAMPER4_EVENT_CB_ID = 8U, /*!< RTC Tamper 4 Callback ID */ + HAL_RTC_TAMPER5_EVENT_CB_ID = 9U, /*!< RTC Tamper 5 Callback ID */ + HAL_RTC_TAMPER6_EVENT_CB_ID = 10U, /*!< RTC Tamper 6 Callback ID */ + HAL_RTC_TAMPER7_EVENT_CB_ID = 11U, /*!< RTC Tamper 7 Callback ID */ + HAL_RTC_TAMPER8_EVENT_CB_ID = 12U, /*!< RTC Tamper 8 Callback ID */ + HAL_RTC_INTERNAL_TAMPER1_EVENT_CB_ID = 13U, /*!< RTC Internal Tamper 1 Callback ID */ + HAL_RTC_INTERNAL_TAMPER2_EVENT_CB_ID = 14U, /*!< RTC Internal Tamper 2 Callback ID */ + HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID = 15U, /*!< RTC Internal Tamper 3 Callback ID */ + HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID = 16U, /*!< RTC Internal Tamper 4 Callback ID */ + HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID = 17U, /*!< RTC Internal Tamper 5 Callback ID */ + HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID = 18U, /*!< RTC Internal Tamper 6 Callback ID */ + HAL_RTC_INTERNAL_TAMPER7_EVENT_CB_ID = 19U, /*!< RTC Internal Tamper 7 Callback ID */ + HAL_RTC_INTERNAL_TAMPER8_EVENT_CB_ID = 20U, /*!< RTC Internal Tamper 8 Callback ID */ + HAL_RTC_INTERNAL_TAMPER9_EVENT_CB_ID = 21U, /*!< RTC Internal Tamper 9 Callback ID */ + HAL_RTC_INTERNAL_TAMPER11_EVENT_CB_ID = 22U, /*!< RTC Internal Tamper 11 Callback ID */ + HAL_RTC_INTERNAL_TAMPER15_EVENT_CB_ID = 23U, /*!< RTC Internal Tamper 15 Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 24U, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 25U /*!< RTC Msp DeInit callback ID */ +} HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Hour_Formats RTC Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 0U +#define RTC_HOURFORMAT_12 RTC_CR_FMT +/** + * @} + */ + +/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition + * @{ + */ +#define RTC_OUTPUT_DISABLE 0U +#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 +#define RTC_OUTPUT_ALARMB RTC_CR_OSEL_1 +#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL +#define RTC_OUTPUT_TAMPER RTC_CR_TAMPOE +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH 0U +#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT + * @{ + */ +#define RTC_OUTPUT_TYPE_PUSHPULL 0U +#define RTC_OUTPUT_TYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE +/** + * @} + */ + +/** @defgroup RTC_Output_PullUp_ALARM_OUT RTC Output Pull-Up ALARM OUT + * @{ + */ +#define RTC_OUTPUT_PULLUP_NONE 0U +#define RTC_OUTPUT_PULLUP_ON RTC_CR_TAMPALRM_PU +/** + * @} + */ + +#if defined(RTC_CR_OUT2EN) +/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap + * @{ + */ +#define RTC_OUTPUT_REMAP_NONE 0U +#define RTC_OUTPUT_REMAP_POS1 RTC_CR_OUT2EN +/** + * @} + */ +#endif /* RTC_CR_OUT2EN */ + +/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM 0U +#define RTC_HOURFORMAT12_PM 1U +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H +#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H +#define RTC_DAYLIGHTSAVING_NONE 0U +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions + * @{ + */ +#define RTC_STOREOPERATION_RESET 0U +#define RTC_STOREOPERATION_SET RTC_CR_BKP +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions + * @{ + */ +#define RTC_FORMAT_BIN 0U +#define RTC_FORMAT_BCD 1U +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01U) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U) +#define RTC_MONTH_MARCH ((uint8_t)0x03U) +#define RTC_MONTH_APRIL ((uint8_t)0x04U) +#define RTC_MONTH_MAY ((uint8_t)0x05U) +#define RTC_MONTH_JUNE ((uint8_t)0x06U) +#define RTC_MONTH_JULY ((uint8_t)0x07U) +#define RTC_MONTH_AUGUST ((uint8_t)0x08U) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10U) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12U) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) + +/** + * @} + */ + +/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE 0U +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL + +/** + * @} + */ + +/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE 0U +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_DATEWEEKDAY | RTC_ALARMMASK_HOURS | \ + RTC_ALARMMASK_MINUTES | RTC_ALARMMASK_SECONDS) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE +#define RTC_ALARM_B RTC_CR_ALRBE + +/** + * @} + */ +/** @defgroup RTC_ALARM_Flag_AutoClear_Definitions RTC Alarms Flag Auto Clear Definitions + * @{ + */ +#define ALARM_FLAG_AUTOCLR_ENABLE 1U +#define ALARM_FLAG_AUTOCLR_DISABLE 0U +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_BCD_Masks_Definitions RTC Alarm Sub Seconds BCD Masks Definitions + * In BCD mode (BIN=00) the overflow bits of the synchronous counter (bits 31:15) are never compared. + * @{ + */ +#define RTC_ALARMSUBSECONDMASK_ALL 0U /*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 /*!< SS[14:1] not used in Alarmcomparison. Only SS[0] is compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 /*!< SS[14:2] not used in Alarm comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) /*!< SS[14:3] not used in Alarm comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 /*!< SS[14:4] not used in Alarm comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:5] not used in Alarm comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:6] not used in Alarm comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:7] not used in Alarm comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 /*!< SS[14:8] not used in Alarm comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:9] not used in Alarm comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:10] not used in Alarm comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:11] not used in Alarm comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:12] not used in Alarm comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:13] not used in Alarm comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14] not used in Alarm comparison. Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[14:0] are compared and must match to activate alarm */ +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions + * @{ + */ +#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ +#define RTC_IT_WUT RTC_CR_WUTIE /*!< Enable Wakeup timer Interrupt */ +#define RTC_IT_SSRU RTC_CR_SSRUIE /*!< Enable SSR Underflow Interrupt */ +#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ +#define RTC_IT_ALRB RTC_CR_ALRBIE /*!< Enable Alarm B Interrupt */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions RTC Flags Definitions + * @{ + */ +#define RTC_FLAG_RECALPF (1U) /*!< Recalibration pending flag */ +#define RTC_FLAG_INITF (2U) /*!< Initialization flag */ +#define RTC_FLAG_RSF (3U) /*!< Registers synchronization flag */ +#define RTC_FLAG_INITS (4U) /*!< Initialization status flag */ +#define RTC_FLAG_SHPF (5U) /*!< Shift operation pending flag */ +#define RTC_FLAG_WUTWF (6U) /*!< Wakeup timer write flag */ +#define RTC_FLAG_SSRUF (7U) /*!< SSR underflow flag */ +#define RTC_FLAG_ITSF (8U) /*!< Internal Time-stamp flag */ +#define RTC_FLAG_TSOVF (9U) /*!< Time-stamp overflow flag */ +#define RTC_FLAG_TSF (10U) /*!< Time-stamp flag */ +#define RTC_FLAG_WUTF (11U) /*!< Wakeup timer flag */ +#define RTC_FLAG_ALRBF (12U) /*!< Alarm B flag */ +#define RTC_FLAG_ALRAF (13U) /*!< Alarm A flag */ +/** + * @} + */ + +/** @defgroup RTC_Clear_Flags_Definitions RTC Clear Flags Definitions + * @{ + */ +#define RTC_CLEAR_SSRUF RTC_SCR_CSSRUF /*!< Clear SSR underflow flag */ +#define RTC_CLEAR_ITSF RTC_SCR_CITSF /*!< Clear Internal Time-stamp flag */ +#define RTC_CLEAR_TSOVF RTC_SCR_CTSOVF /*!< Clear Time-stamp overflow flag */ +#define RTC_CLEAR_TSF RTC_SCR_CTSF /*!< Clear Time-stamp flag */ +#define RTC_CLEAR_WUTF RTC_SCR_CWUTF /*!< Clear Wakeup timer flag */ +#define RTC_CLEAR_ALRBF RTC_SCR_CALRBF /*!< Clear Alarm B flag */ +#define RTC_CLEAR_ALRAF RTC_SCR_CALRAF /*!< Clear Alarm A flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTC_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__ RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ + do{ \ + RTC->WPR = 0xCAU; \ + RTC->WPR = 0x53U; \ + } while(0U) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ + do{ \ + RTC->WPR = 0xFFU; \ + } while(0U) + +/** + * @brief Add 1 hour (summer time change). + * @note This interface is deprecated. + * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT(RTC->CR, RTC_CR_ADD1H); \ + MODIFY_REG(RTC->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Subtract 1 hour (winter time change). + * @note This interface is deprecated. + * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT(RTC->CR, RTC_CR_SUB1H); \ + MODIFY_REG(RTC->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_ALRBE)) + +/** + * @brief Disable the RTC ALARMB peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_ALRBE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)( \ + ((__INTERRUPT__) == RTC_IT_ALRA) ? (SET_BIT(RTC->CR, RTC_CR_ALRAIE)):\ + ((__INTERRUPT__) == RTC_IT_ALRB) ? (SET_BIT(RTC->CR, RTC_CR_ALRBIE)):\ + (0U)) /* Dummy action because is an invalid parameter value */ + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__)( \ + ((__INTERRUPT__) == RTC_IT_ALRA) ? (CLEAR_BIT(RTC->CR, RTC_CR_ALRAIE)):\ + ((__INTERRUPT__) == RTC_IT_ALRB) ? (CLEAR_BIT(RTC->CR, RTC_CR_ALRBIE)):\ + (0U)) /* Dummy action because is an invalid parameter value */ + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)( \ + ((__INTERRUPT__) == RTC_IT_ALRA) ? (READ_BIT(RTC->MISR, RTC_MISR_ALRAMF) == RTC_MISR_ALRAMF):\ + ((__INTERRUPT__) == RTC_IT_ALRB) ? (READ_BIT(RTC->MISR, RTC_MISR_ALRBMF) == RTC_MISR_ALRBMF):\ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @arg @ref RTC_IT_ALRB Alarm B interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)( \ + ((__INTERRUPT__) == RTC_IT_ALRA) ? (READ_BIT(RTC->CR, RTC_CR_ALRAIE) == RTC_CR_ALRAIE):\ + ((__INTERRUPT__) == RTC_IT_ALRB) ? (READ_BIT(RTC->CR, RTC_CR_ALRBIE) == RTC_CR_ALRBIE):\ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/** + * @brief Get the selected RTC Alarms flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to check. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_ALRAF) ? (READ_BIT(RTC->SR, RTC_SR_ALRAF) == RTC_SR_ALRAF):\ + ((__FLAG__) == RTC_FLAG_ALRBF) ? (READ_BIT(RTC->SR, RTC_SR_ALRBF) == RTC_SR_ALRBF):\ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/** + * @brief Clear the RTC Alarms pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRBF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_ALRAF) ? (WRITE_REG(RTC->SCR, RTC_SCR_CALRAF)):\ + ((__FLAG__) == RTC_FLAG_ALRBF) ? (WRITE_REG(RTC->SCR, RTC_SCR_CALRBF)):\ + (0U)) /* Dummy action because is an invalid parameter value */ + +/** + * @brief Check whether if the RTC Calendar is initialized. + * @param __HANDLE__ specifies the RTC handle. + * @retval The state of RTC Calendar initialization (TRUE or FALSE). + */ +#define __HAL_RTC_IS_CALENDAR_INITIALIZED(__HANDLE__) ((((RTC->ICSR) & (RTC_ICSR_INITS)) == RTC_ICSR_INITS)) + +/** + * @} + */ + +/* Include RTC HAL Extended module */ +#include "stm32h7rsxx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); + +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, + pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @{ + */ +/* RTC Time and Date functions ************************************************/ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(const RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(const RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +void HAL_RTC_DST_Add1Hour(const RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_Sub1Hour(const RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_SetStoreOperation(const RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_ClearStoreOperation(const RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTC_DST_ReadStoreOperation(const RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @{ + */ +/* RTC Alarm functions ********************************************************/ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(const RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, + uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_RTCStateTypeDef HAL_RTC_GetState(const RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | \ + RTC_TR_MNT | RTC_TR_MNU| RTC_TR_ST | \ + RTC_TR_SU) +#define RTC_DR_RESERVED_MASK (RTC_DR_YT | RTC_DR_YU | RTC_DR_WDU | \ + RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | \ + RTC_DR_DU) +#define RTC_INIT_MASK 0xFFFFFFFFU +#define RTC_RSF_MASK (~(RTC_ICSR_INIT | RTC_ICSR_RSF)) + +#define RTC_TIMEOUT_VALUE 1000U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters + * @{ + */ +#if defined(RTC_CR_OSEL) +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ + ((OUTPUT) == RTC_OUTPUT_WAKEUP) || \ + ((OUTPUT) == RTC_OUTPUT_TAMPER)) +#endif /* RTC_CR_OSEL */ + +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +#define IS_RTC_OUTPUT_PULLUP(TYPE) (((TYPE) == RTC_OUTPUT_PULLUP_NONE) || \ + ((TYPE) == RTC_OUTPUT_PULLUP_ON)) + +#if defined(RTC_CR_OUT2EN) +#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ + ((REMAP) == RTC_OUTPUT_REMAP_POS1)) +#endif /* RTC_CR_OUT2EN */ + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ + ((PM) == RTC_HOURFORMAT12_PM)) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || \ + ((FORMAT) == RTC_FORMAT_BCD)) + +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U) + +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U)) + +#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U)) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ~(RTC_ALARMMASK_ALL)) == 0UL) + +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || \ + ((ALARM) == RTC_ALARM_B)) + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == 0UL) || \ + (((MASK) >= RTC_ALARMSUBSECONDMASK_SS14_1) && \ + ((MASK) <= RTC_ALARMSUBSECONDMASK_NONE))) + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (RTC_PRER_PREDIV_A >> RTC_PRER_PREDIV_A_Pos)) + +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (RTC_PRER_PREDIV_S >> RTC_PRER_PREDIV_S_Pos)) + +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0U) && ((HOUR) <= 12U)) + +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U) + +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U) + +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U) + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +uint8_t RTC_ByteToBcd2(uint8_t Value); +uint8_t RTC_Bcd2ToByte(uint8_t Value); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_RTC_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc_ex.h new file mode 100644 index 000000000..6b90e94d8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_rtc_ex.h @@ -0,0 +1,1783 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_RTC_EX_H +#define STM32H7RSxx_HAL_RTC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup RTCEx RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + +/** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pins */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger */ + + uint32_t NoErase; /*!< Specifies the Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ + + uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. + This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */ + + uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. + This parameter can be a value of @ref RTCEx_Tamper_Filter */ + + uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. + This parameter can be a value of + @ref RTCEx_Tamper_Sampling_Frequencies */ + + uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration. + This parameter can be a value of + @ref RTCEx_Tamper_Pin_Precharge_Duration */ + + uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp. + This parameter can be a value of @ref RTCEx_Tamper_Pull_UP */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of + @ref RTCEx_Tamper_TimeStampOnTamperDetection */ +} RTC_TamperTypeDef; +/** + * @} + */ + + +/** @defgroup RTCEx_Active_Seed_Size Seed size Definitions + * @{ + */ +#define RTC_ATAMP_SEED_NB_UINT32 4U +/** + * @} + */ + + +/** @defgroup RTCEx_ActiveTamper_structures_definition RTCEx Active Tamper structures definitions + * @{ + */ +typedef struct +{ + uint32_t Enable; /*!< Specifies the Tamper input is active. + This parameter can be a value of @ref RTCEx_ActiveTamper_Enable */ + + uint32_t Interrupt; /*!< Specifies the interrupt mode. + This parameter can be a value of @ref RTCEx_ActiveTamper_Interrupt */ + + uint32_t Output; /*!< Specifies the TAMP output to be compared with. + The same output can be used for several tamper inputs. + This parameter can be a value of @ref RTCEx_ActiveTamper_Sel */ + + uint32_t NoErase; /*!< Specifies the Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ + + uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. + This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */ + +} RTC_ATampInputTypeDef; + + +typedef struct +{ + uint32_t ActiveFilter; /*!< Specifies the Active tamper filter enable. + This parameter can be a value of @ref RTCEx_ActiveTamper_Filter */ + + uint32_t ActiveAsyncPrescaler; /*!< Specifies the Active Tamper asynchronous Prescaler clock. + This parameter can be a value of + @ref RTCEx_ActiveTamper_Async_prescaler */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the timeStamp on tamper detection. + This parameter can be a value of + @ref RTCEx_Tamper_TimeStampOnTamperDetection */ + + uint32_t ActiveOutputChangePeriod; /*!< Specifies the Active Tamper output change period. + This parameter can be a value from 0 to 7 */ + + uint32_t Seed[RTC_ATAMP_SEED_NB_UINT32]; + /*!< Specifies the RNG Seed value. + This parameter is an array of value from 0 to 0xFFFFFFFF */ + + RTC_ATampInputTypeDef TampInput[RTC_TAMP_NB]; + /*!< Specifies configuration of all active tampers. + The index of TampInput[RTC_TAMP_NB] can be a value of RTCEx_ActiveTamper_Sel */ +} RTC_ActiveTampersTypeDef; +/** + * @} + */ + +/** @defgroup RTCEx_Internal_Tamper_structure_definition RTCEx Internal Tamper structure definition + * @{ + */ +typedef struct +{ + uint32_t IntTamper; /*!< Specifies the Internal Tamper Pin. + This parameter can be a value of @ref RTCEx_Internal_Tamper_Pins */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of + @ref RTCEx_Tamper_TimeStampOnTamperDetection */ + + uint32_t NoErase; /*!< Specifies the internal Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ + +} RTC_InternalTamperTypeDef; +/** + * @} + */ + +/** @defgroup RTCEx_Privilege_State_structure_definition RTCEx Privilege structure definition + * @{ + */ +typedef struct +{ + uint32_t rtcPrivilegeFull; /*!< Specifies If the RTC is fully privileged or not. + This parameter can be a value of @ref RTCEx_RTC_Privilege_Full */ + + uint32_t rtcPrivilegeFeatures; /*!< Specifies the privileged features. + This parameter is only relevant if RTC is not fully privileged + (rtcPrivilegeFull == RTC_PRIVILEGE_FULL_NO). + This parameter can be a combination of + @ref RTCEx_RTC_Privilege_Features */ + + uint32_t tampPrivilegeFull; /*!< Specifies If the TAMP is fully privileged or not execpt monotonic + counters and BackUp registers. + This parameter can be a value of @ref RTCEx_TAMP_Privilege_Full */ + + uint32_t backupRegisterPrivZone; /*!< Specifies backup register zone to be privileged. + This parameter can be a combination of + @ref RTCEx_Backup_Reg_Privilege_zone */ + + uint32_t backupRegisterStartZone2; /*!< Specifies the backup register start zone 2. + Zone 1 : read protection write protection. + Zone 2 : read non-protection write protection. + This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to specify + the register */ + + uint32_t backupRegisterStartZone3; /*!< Specifies the backup register start zone 3. + Zone 3 : read non-protection write non-protection. + This parameter can be RTC_BKP_DRx where x can be from 0 to 31 to specify + the register */ + + uint32_t MonotonicCounterPrivilege; /*!< Specifies If the monotonic counter is privileged or not. + This parameter can be a value of + @ref RTCEx_TAMP_Monotonic_Counter_Privilege */ +} RTC_PrivilegeStateTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +#if defined(RTC_CR_TSEDGE) +/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING 0U +#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE +/** + * @} + */ +#endif /* RTC_CR_TSEDGE */ + +/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection + * @{ + */ +#define RTC_TIMESTAMPPIN_DEFAULT 0U +/** + * @} + */ + +/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions + * @{ + */ +#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0U +#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) +#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 +#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC 0U /*!< If RTCCLK = 32768 Hz, Smooth calibration period + is 32s, else 2exp20 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibration period + is 16s, else 2exp19 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibration period + is 8s, else 2exp18 RTCCLK pulses */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0U /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_low_power_Definitions RTCEx Smooth calib Low Power Definitions + * @{ + */ +#define RTC_LPCAL_SET RTC_CALR_LPCAL /*!< Calibration window is 2exp20 ck_apre, which is the required configuration for ultra-low consumption mode. */ +#define RTC_LPCAL_RESET 0U /*!< Calibration window is 2exp20 RTCCLK, which is a high-consumption mode. + This mode should be set only when less + than 32s calibration window is required. */ +/** + * @} + */ + +#if defined(RTC_CR_COSEL) +/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ 0U +#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL +/** + * @} + */ +#endif /* RTC_CR_COSEL */ + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET 0U +#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pins RTCEx Tamper Pins Definition + * @{ + */ +#define RTC_TAMPER_1 TAMP_CR1_TAMP1E +#define RTC_TAMPER_2 TAMP_CR1_TAMP2E +#if (RTC_TAMP_NB == 3U) +#define RTC_TAMPER_3 TAMP_CR1_TAMP3E +#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2 | RTC_TAMPER_3 ) +#elif (RTC_TAMP_NB == 8U) +#define RTC_TAMPER_3 TAMP_CR1_TAMP3E +#define RTC_TAMPER_4 TAMP_CR1_TAMP4E +#define RTC_TAMPER_5 TAMP_CR1_TAMP5E +#define RTC_TAMPER_6 TAMP_CR1_TAMP6E +#define RTC_TAMPER_7 TAMP_CR1_TAMP7E +#define RTC_TAMPER_8 TAMP_CR1_TAMP8E +#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2 |\ + RTC_TAMPER_3 | RTC_TAMPER_4 |\ + RTC_TAMPER_5 | RTC_TAMPER_6 |\ + RTC_TAMPER_7 | RTC_TAMPER_8 ) +#else +#define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2) +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTCEx_Internal_Tamper_Pins RTCEx Internal Tamper Pins Definition + * @{ + */ +#define RTC_INT_TAMPER_1 TAMP_CR1_ITAMP1E +#define RTC_INT_TAMPER_2 TAMP_CR1_ITAMP2E +#define RTC_INT_TAMPER_3 TAMP_CR1_ITAMP3E +#define RTC_INT_TAMPER_4 TAMP_CR1_ITAMP4E +#define RTC_INT_TAMPER_5 TAMP_CR1_ITAMP5E +#define RTC_INT_TAMPER_6 TAMP_CR1_ITAMP6E +#define RTC_INT_TAMPER_7 TAMP_CR1_ITAMP7E +#define RTC_INT_TAMPER_8 TAMP_CR1_ITAMP8E +#define RTC_INT_TAMPER_9 TAMP_CR1_ITAMP9E +#define RTC_INT_TAMPER_11 TAMP_CR1_ITAMP11E +#define RTC_INT_TAMPER_15 TAMP_CR1_ITAMP15E +#define RTC_INT_TAMPER_ALL (RTC_INT_TAMPER_1 | RTC_INT_TAMPER_2 |\ + RTC_INT_TAMPER_3 | RTC_INT_TAMPER_4 |\ + RTC_INT_TAMPER_5 | RTC_INT_TAMPER_6 |\ + RTC_INT_TAMPER_7 | RTC_INT_TAMPER_8 |\ + RTC_INT_TAMPER_9 | RTC_INT_TAMPER_11 |\ + RTC_INT_TAMPER_15) +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger RTCEx Tamper Trigger + * @{ + */ +#define RTC_TAMPERTRIGGER_RISINGEDGE 0U /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ +#define RTC_TAMPERTRIGGER_FALLINGEDGE 1U /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ +#define RTC_TAMPERTRIGGER_LOWLEVEL 2U /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ +#define RTC_TAMPERTRIGGER_HIGHLEVEL 3U /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_MaskFlag RTCEx Tamper MaskFlag + * @{ + */ +#define RTC_TAMPERMASK_FLAG_DISABLE 0U +#define RTC_TAMPERMASK_FLAG_ENABLE 1U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Maskable_nb RTCEx Tampers maskable number + * @{ + */ +#if (RTC_TAMP_NB == 2U) +#define RTC_TAMPER_MASKABLE_NB 2U +#else +#define RTC_TAMPER_MASKABLE_NB 3U +#endif /* (RTC_TAMP_NB == 2U) */ + +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_EraseBackUp RTCEx Tamper EraseBackUp + * @{ + */ +#define RTC_TAMPER_ERASE_BACKUP_ENABLE 0U +#define RTC_TAMPER_ERASE_BACKUP_DISABLE 1U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Filter RTCEx Tamper Filter + * @{ + */ +#define RTC_TAMPERFILTER_DISABLE 0U /*!< Tamper filter is disabled */ +#define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Sampling_Frequencies RTCEx Tamper Sampling Frequencies + * @{ + */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1 | \ + TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration RTCEx Tamper Pin Precharge Duration + * @{ + */ +#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (TAMP_FLTCR_TAMPPRCH_0 | TAMP_FLTCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pull_UP RTCEx Tamper Pull UP + * @{ + */ +#define RTC_TAMPER_PULLUP_ENABLE 0U /*!< Tamper pins are pre-charged before sampling */ +#define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection RTCEx Tamper TimeStamp On Tamper Detection Definitions + * @{ + */ +#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0U /*!< TimeStamp on Tamper Detection event is not saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Detection_Output RTCEx Tamper detection output Definitions + * @{ + */ +#if defined(RTC_CR_TAMPOE) +#define RTC_TAMPERDETECTIONOUTPUT_DISABLE 0U /*!< Tamper detection output disable on TAMPALRM */ +#define RTC_TAMPERDETECTIONOUTPUT_ENABLE RTC_CR_TAMPOE /*!< Tamper detection output enable on TAMPALRM */ +#endif /* RTC_CR_TAMPOE */ +/** + * @} + */ + + +/** @defgroup RTCEx_Tamper_Interrupt RTCEx Tamper Interrupt + * @{ + */ +#define RTC_IT_TAMP_1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ +#define RTC_IT_TAMP_2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ +#if (RTC_TAMP_NB == 3U) +#define RTC_IT_TAMP_3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ +#define RTC_IT_TAMP_ALL (RTC_IT_TAMP_1 | RTC_IT_TAMP_2 | RTC_IT_TAMP_3) +#elif (RTC_TAMP_NB == 8U) +#define RTC_IT_TAMP_3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ +#define RTC_IT_TAMP_4 TAMP_IER_TAMP4IE /*!< Tamper 4 Interrupt */ +#define RTC_IT_TAMP_5 TAMP_IER_TAMP5IE /*!< Tamper 5 Interrupt */ +#define RTC_IT_TAMP_6 TAMP_IER_TAMP6IE /*!< Tamper 6 Interrupt */ +#define RTC_IT_TAMP_7 TAMP_IER_TAMP7IE /*!< Tamper 7 Interrupt */ +#define RTC_IT_TAMP_8 TAMP_IER_TAMP8IE /*!< Tamper 8 Interrupt */ +#define RTC_IT_TAMP_ALL (RTC_IT_TAMP_1 | RTC_IT_TAMP_2 |\ + RTC_IT_TAMP_3 | RTC_IT_TAMP_4 |\ + RTC_IT_TAMP_5 | RTC_IT_TAMP_6 |\ + RTC_IT_TAMP_7 | RTC_IT_TAMP_8 ) +#else +#define RTC_IT_TAMP_ALL (RTC_IT_TAMP_1 | RTC_IT_TAMP_2) +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTCEx_Internal_Tamper_Interrupt RTCEx Internal Tamper Interrupt + * @{ + */ +#define RTC_IT_INT_TAMP_1 TAMP_IER_ITAMP1IE /*!< Tamper 1 internal Interrupt */ +#define RTC_IT_INT_TAMP_2 TAMP_IER_ITAMP2IE /*!< Tamper 2 internal Interrupt */ +#define RTC_IT_INT_TAMP_3 TAMP_IER_ITAMP3IE /*!< Tamper 3 internal Interrupt */ +#define RTC_IT_INT_TAMP_4 TAMP_IER_ITAMP4IE /*!< Tamper 4 internal Interrupt */ +#define RTC_IT_INT_TAMP_5 TAMP_IER_ITAMP5IE /*!< Tamper 5 internal Interrupt */ +#define RTC_IT_INT_TAMP_6 TAMP_IER_ITAMP6IE /*!< Tamper 6 internal Interrupt */ +#define RTC_IT_INT_TAMP_7 TAMP_IER_ITAMP7IE /*!< Tamper 7 internal Interrupt */ +#define RTC_IT_INT_TAMP_8 TAMP_IER_ITAMP8IE /*!< Tamper 8 internal Interrupt */ +#define RTC_IT_INT_TAMP_9 TAMP_IER_ITAMP9IE /*!< Tamper 9 internal Interrupt */ +#define RTC_IT_INT_TAMP_11 TAMP_IER_ITAMP11IE /*!< Tamper 11 internal Interrupt */ +#define RTC_IT_INT_TAMP_15 TAMP_IER_ITAMP15IE /*!< Tamper 15 internal Interrupt */ + +#define RTC_IT_INT_TAMP_ALL (RTC_IT_INT_TAMP_1 | RTC_IT_INT_TAMP_2 |\ + RTC_IT_INT_TAMP_3 | RTC_IT_INT_TAMP_4 |\ + RTC_IT_INT_TAMP_5 | RTC_IT_INT_TAMP_6 |\ + RTC_IT_INT_TAMP_7 | RTC_IT_INT_TAMP_8 |\ + RTC_IT_INT_TAMP_9 | RTC_IT_INT_TAMP_11 |\ + RTC_IT_INT_TAMP_15) +/** + * @} + */ + +/** @defgroup RTCEx_Flags RTCEx Flags + * @{ + */ +#define RTC_FLAG_TAMP_1 TAMP_SR_TAMP1F +#define RTC_FLAG_TAMP_2 TAMP_SR_TAMP2F +#if (RTC_TAMP_NB == 3U) +#define RTC_FLAG_TAMP_3 TAMP_SR_TAMP3F +#define RTC_FLAG_TAMP_ALL (RTC_FLAG_TAMP_1 | RTC_FLAG_TAMP_2 | RTC_FLAG_TAMP_3 ) +#elif (RTC_TAMP_NB == 8U) +#define RTC_FLAG_TAMP_3 TAMP_SR_TAMP3F +#define RTC_FLAG_TAMP_4 TAMP_SR_TAMP4F +#define RTC_FLAG_TAMP_5 TAMP_SR_TAMP5F +#define RTC_FLAG_TAMP_6 TAMP_SR_TAMP6F +#define RTC_FLAG_TAMP_7 TAMP_SR_TAMP7F +#define RTC_FLAG_TAMP_8 TAMP_SR_TAMP8F +#define RTC_FLAG_TAMP_ALL (RTC_FLAG_TAMP_1 | RTC_FLAG_TAMP_2 | RTC_FLAG_TAMP_3 |\ + RTC_FLAG_TAMP_4 | RTC_FLAG_TAMP_5 | RTC_FLAG_TAMP_6 |\ + RTC_FLAG_TAMP_7 | RTC_FLAG_TAMP_8) +#else +#define RTC_FLAG_TAMP_ALL (TAMP_SR_TAMP1F | TAMP_SR_TAMP2F) +#endif /* RTC_TAMP_NB */ + +#define RTC_FLAG_INT_TAMP_1 TAMP_SR_ITAMP1F +#define RTC_FLAG_INT_TAMP_2 TAMP_SR_ITAMP2F +#define RTC_FLAG_INT_TAMP_3 TAMP_SR_ITAMP3F +#define RTC_FLAG_INT_TAMP_4 TAMP_SR_ITAMP4F +#define RTC_FLAG_INT_TAMP_5 TAMP_SR_ITAMP5F +#define RTC_FLAG_INT_TAMP_6 TAMP_SR_ITAMP6F +#define RTC_FLAG_INT_TAMP_7 TAMP_SR_ITAMP7F +#define RTC_FLAG_INT_TAMP_8 TAMP_SR_ITAMP8F +#define RTC_FLAG_INT_TAMP_9 TAMP_SR_ITAMP9F +#define RTC_FLAG_INT_TAMP_11 TAMP_SR_ITAMP11F +#define RTC_FLAG_INT_TAMP_15 TAMP_SR_ITAMP15F +#define RTC_FLAG_INT_TAMP_ALL (RTC_FLAG_INT_TAMP_1 | RTC_FLAG_INT_TAMP_2 |\ + RTC_FLAG_INT_TAMP_3 | RTC_FLAG_INT_TAMP_4 |\ + RTC_FLAG_INT_TAMP_5 | RTC_FLAG_INT_TAMP_6 |\ + RTC_FLAG_INT_TAMP_7 | RTC_FLAG_INT_TAMP_8 |\ + RTC_FLAG_INT_TAMP_9 | RTC_FLAG_INT_TAMP_11 |\ + RTC_FLAG_INT_TAMP_15) +/** + * @} + */ + + +/** @defgroup RTCEx_ActiveTamper_Enable RTCEx_ActiveTamper_Enable Definitions + * @{ + */ +#define RTC_ATAMP_ENABLE 1U +#define RTC_ATAMP_DISABLE 0U +/** + * @} + */ + +/** @defgroup RTCEx_ActiveTamper_Interrupt RTCEx_ActiveTamper_Interrupt Definitions + * @{ + */ +#define RTC_ATAMP_INTERRUPT_ENABLE 1U +#define RTC_ATAMP_INTERRUPT_DISABLE 0U +/** + * @} + */ + +/** @defgroup RTCEx_ActiveTamper_Filter RTCEx_ActiveTamper_Filter Definitions + * @{ + */ +#define RTC_ATAMP_FILTER_ENABLE TAMP_ATCR1_FLTEN +#define RTC_ATAMP_FILTER_DISABLE 0U +/** + * @} + */ + +/** @defgroup RTCEx_ActiveTamper_Async_prescaler RTCEx Active_Tamper_Asynchronous_Prescaler clock Definitions + * @{ + */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK 0U /*!< RTCCLK */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_2 TAMP_ATCR1_ATCKSEL_0 /*!< RTCCLK/2 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_4 TAMP_ATCR1_ATCKSEL_1 /*!< RTCCLK/4 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_8 (TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/8 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_16 TAMP_ATCR1_ATCKSEL_2 /*!< RTCCLK/16 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_32 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/32 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_64 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1) /*!< RTCCLK/64 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_128 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/128 */ +#define RTC_ATAMP_ASYNCPRES_RTCCLK_2048 (TAMP_ATCR1_ATCKSEL_3 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/2048 */ +/** + * @} + */ + +/** @defgroup RTCEx_ActiveTamper_Sel RTCEx Active Tamper selection Definition + * @{ + */ +#define RTC_ATAMP_1 0U /*!< Tamper 1 */ +#define RTC_ATAMP_2 1U /*!< Tamper 2 */ +#define RTC_ATAMP_3 2U /*!< Tamper 3 */ +#define RTC_ATAMP_4 3U /*!< Tamper 4 */ +#define RTC_ATAMP_5 4U /*!< Tamper 5 */ +#define RTC_ATAMP_6 5U /*!< Tamper 6 */ +#define RTC_ATAMP_7 6U /*!< Tamper 7 */ +#define RTC_ATAMP_8 7U /*!< Tamper 8 */ +/** + * @} + */ + +/** @defgroup RTCEx_MonotonicCounter_Instance RTCEx Monotonic Counter Instance Definition + * @{ + */ +#define RTC_MONOTONIC_COUNTER_1 0U /*!< Monotonic counter 1 */ +/** + * @} + */ + +/** @defgroup RTCEx_Backup_Registers RTCEx Backup Registers Definition + * @{ + */ +#define RTC_BKP_NUMBER RTC_BKP_NB +#define RTC_BKP_DR0 0x00U +#define RTC_BKP_DR1 0x01U +#define RTC_BKP_DR2 0x02U +#define RTC_BKP_DR3 0x03U +#define RTC_BKP_DR4 0x04U +#define RTC_BKP_DR5 0x05U +#define RTC_BKP_DR6 0x06U +#define RTC_BKP_DR7 0x07U +#define RTC_BKP_DR8 0x08U +#define RTC_BKP_DR9 0x09U +#define RTC_BKP_DR10 0x0AU +#define RTC_BKP_DR11 0x0BU +#define RTC_BKP_DR12 0x0CU +#define RTC_BKP_DR13 0x0DU +#define RTC_BKP_DR14 0x0EU +#define RTC_BKP_DR15 0x0FU +#define RTC_BKP_DR16 0x10U +#define RTC_BKP_DR17 0x11U +#define RTC_BKP_DR18 0x12U +#define RTC_BKP_DR19 0x13U +#define RTC_BKP_DR20 0x14U +#define RTC_BKP_DR21 0x15U +#define RTC_BKP_DR22 0x16U +#define RTC_BKP_DR23 0x17U +#define RTC_BKP_DR24 0x18U +#define RTC_BKP_DR25 0x19U +#define RTC_BKP_DR26 0x1AU +#define RTC_BKP_DR27 0x1BU +#define RTC_BKP_DR28 0x1CU +#define RTC_BKP_DR29 0x1DU +#define RTC_BKP_DR30 0x1EU +#define RTC_BKP_DR31 0x1FU +/** + * @} + */ + +/** @defgroup RTCEx_Binary_Mode RTC Binary Mode (32-bit free-running counter configuration). + * Warning : It Should not be confused with the Binary format @ref RTC_Input_parameter_format_definitions. + * @{ + */ +#define RTC_BINARY_NONE 0U /*!< Free running BCD calendar mode (Binary mode disabled) */ +#define RTC_BINARY_ONLY RTC_ICSR_BIN_0 /*!< Free running Binary mode (BCD mode disabled) */ +#define RTC_BINARY_MIX RTC_ICSR_BIN_1 /*!< Free running BCD calendar and Binary modes */ +/** + * @} + */ + +/** @defgroup RTCEx_Binary_mix_BCDU If Binary mode is RTC_BINARY_MIX, the BCD calendar second is incremented + * using the SSR Least Significant Bits. + * @{ + */ +#define RTC_BINARY_MIX_BCDU_0 0U /*!< The 1s BCD calendar increment is generated each time SS[7:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_1 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[8:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_2 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[9:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_3 (0x3UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[10:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_4 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[11:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_5 (0x5UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[12:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_6 (0x6UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[13:0] = 0 */ +#define RTC_BINARY_MIX_BCDU_7 (0x7UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[14:0] = 0 */ +/** + * @} + */ + +/** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Masks_Definitions RTC Alarm Sub Seconds with binary or mix mode + * Masks Definitions. + * @{ + */ +#define RTC_ALARMSUBSECONDBINMASK_ALL 0U /*!< All Alarm SS fields are masked.There is no comparison on sub seconds for Alarm */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_1 (1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:1] are don't care in Alarm comparison. Only SS[0] is compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_2 (2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:2] are don't care in Alarm comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_3 (3UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:3] are don't care in Alarm comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_4 (4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:4] are don't care in Alarm comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_5 (5UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:5] are don't care in Alarm comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_6 (6UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:6] are don't care in Alarm comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_7 (7UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:7] are don't care in Alarm comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_8 (8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:8] are don't care in Alarm comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_9 (9UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:9] are don't care in Alarm comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_10 (10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:10] are don't care in Alarm comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_11 (11UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:11] are don't care in Alarm comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_12 (12UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:12] are don't care in Alarm comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_13 (13UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:13] are don't care in Alarm comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_14 (14UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:14] are don't care in Alarm comparison. Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_15 (15UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:15] are don't care in Alarm comparison. Only SS[14:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_16 (16UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:16] are don't care in Alarm comparison. Only SS[15:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_17 (17UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:17] are don't care in Alarm comparison. Only SS[16:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_18 (18UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:18] are don't care in Alarm comparison. Only SS[17:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_19 (19UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:19] are don't care in Alarm comparison. Only SS[18:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_20 (20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:20] are don't care in Alarm comparison. Only SS[19:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_21 (21UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:21] are don't care in Alarm comparison. Only SS[20:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_22 (22UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:22] are don't care in Alarm comparison. Only SS[21:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_23 (23UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:23] are don't care in Alarm comparison. Only SS[22:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_24 (24UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:24] are don't care in Alarm comparison. Only SS[23:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_25 (25UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:25] are don't care in Alarm comparison. Only SS[24:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_26 (26UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:26] are don't care in Alarm comparison. Only SS[25:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_27 (27UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:27] are don't care in Alarm comparison. Only SS[26:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_28 (28UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:28] are don't care in Alarm comparison. Only SS[27:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_29 (29UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:29] are don't care in Alarm comparison. Only SS[28:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31_30 (30UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:30] are don't care in Alarm comparison. Only SS[29:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_SS31 (31UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31] is don't care in Alarm comparison. Only SS[30:0] are compared */ +#define RTC_ALARMSUBSECONDBINMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[31:0] are compared and must match to activate alarm */ +/** + * @} + */ + +/** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Clear_Definitions RTC Alarm Sub Seconds + * with binary mode auto clear Definitions + * @{ + */ +#define RTC_ALARMSUBSECONDBIN_AUTOCLR_NO 0UL /*!< The synchronous Binary counter(SS[31:0] in RTC_SSR) is free-running */ +#define RTC_ALARMSUBSECONDBIN_AUTOCLR_YES RTC_ALRMASSR_SSCLR +/*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFF FFFF to RTC_ALRMABINR -> SS[31:0] + value and is automatically reloaded with 0xFFFF FFFF whenreaching RTC_ALRMABINR -> SS[31:0]. */ +/** + * @} + */ + +/** @defgroup RTCEx_RTC_Privilege_Full RTCEx Privilege Full Definition + * @{ + */ +#define RTC_PRIVILEGE_FULL_YES RTC_PRIVCFGR_PRIV +#define RTC_PRIVILEGE_FULL_NO 0U +/** + * @} + */ + +/** @defgroup RTCEx_RTC_Privilege_Features RTCEx Privilege Features Definition + * @{ + */ +#define RTC_PRIVILEGE_FEATURE_NONE 0U +#define RTC_PRIVILEGE_FEATURE_INIT RTC_PRIVCFGR_INITPRIV /*!< Initialization */ +#define RTC_PRIVILEGE_FEATURE_CAL RTC_PRIVCFGR_CALPRIV /*!< Calibration */ +#define RTC_PRIVILEGE_FEATURE_TS RTC_PRIVCFGR_TSPRIV /*!< Time stamp */ +#define RTC_PRIVILEGE_FEATURE_WUT RTC_PRIVCFGR_WUTPRIV /*!< Wake up timer */ +#define RTC_PRIVILEGE_FEATURE_ALRA RTC_PRIVCFGR_ALRAPRIV /*!< Alarm A */ +#define RTC_PRIVILEGE_FEATURE_ALRB RTC_PRIVCFGR_ALRBPRIV /*!< Alarm B */ + +#define RTC_PRIVILEGE_FEATURE_ALL (RTC_PRIVCFGR_INITPRIV | RTC_PRIVCFGR_CALPRIV | \ + RTC_PRIVCFGR_TSPRIV | RTC_PRIVCFGR_WUTPRIV | \ + RTC_PRIVCFGR_ALRAPRIV | RTC_PRIVCFGR_ALRBPRIV) +/** + * @} + */ + +/** @defgroup RTCEx_TAMP_Privilege_Full RTCEx TAMP security Definition + * @{ + */ +#define TAMP_PRIVILEGE_FULL_YES TAMP_PRIVCFGR_TAMPPRIV +#define TAMP_PRIVILEGE_FULL_NO 0U +/** + * @} + */ + +/** @defgroup RTCEx_TAMP_Device_Secrets_Erase_Conf RTCEx TAMP Device Secrets Erase Configuration Definition + * @{ + */ +#define TAMP_DEVICESECRETS_ERASE_NONE 0U /*!< No Erase */ +#define TAMP_DEVICESECRETS_ERASE_BKPSRAM TAMP_RPCFGR_RPCFG0 /*!< Backup SRAM */ +/** + * @} + */ + +/** @defgroup RTCEx_TAMP_Monotonic_Counter_Privilege RTCEx TAMP Monotonic Counter Privilege Definition + * @{ + */ +#define TAMP_MONOTONIC_CNT_PRIVILEGE_YES TAMP_PRIVCFGR_CNT1PRIV +#define TAMP_MONOTONIC_CNT_PRIVILEGE_NO 0U +/** + * @} + */ + +/** @defgroup RTCEx_Backup_Reg_Privilege_zone RTCEx Privilege Backup register privilege zone Definition + * @{ + */ +#define RTC_PRIVILEGE_BKUP_ZONE_NONE 0U +#define RTC_PRIVILEGE_BKUP_ZONE_1 TAMP_PRIVCFGR_BKPRWPRIV +#define RTC_PRIVILEGE_BKUP_ZONE_2 TAMP_PRIVCFGR_BKPWPRIV +#define RTC_PRIVILEGE_BKUP_ZONE_ALL (RTC_PRIVILEGE_BKUP_ZONE_1 | RTC_PRIVILEGE_BKUP_ZONE_2) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** @brief Clear the specified RTC pending flag. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref RTC_CLEAR_SSRUF Clear SSR underflow flag + * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag + * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag + * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag + * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag + * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag + * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag + * @retval None + */ +#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) (RTC->SCR = (__FLAG__)) + +/** @brief Check whether the specified RTC flag is set or not. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag + * @arg @ref RTC_FLAG_INITF Initialization flag + * @arg @ref RTC_FLAG_RSF Registers synchronization flag + * @arg @ref RTC_FLAG_INITS Initialization status flag + * @arg @ref RTC_FLAG_SHPF Shift operation pending flag + * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag + * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag + * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag + * @arg @ref RTC_FLAG_TSF Time-stamp flag + * @arg @ref RTC_FLAG_WUTF Wakeup timer flag + * @arg @ref RTC_FLAG_ALRBF Alarm B flag + * @arg @ref RTC_FLAG_ALRAF Alarm A flag + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_RECALPF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_RECALPF) == \ + RTC_ICSR_RECALPF) : \ + ((__FLAG__) == RTC_FLAG_INITF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == \ + RTC_ICSR_INITF) : \ + ((__FLAG__) == RTC_FLAG_RSF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_RSF) == \ + RTC_ICSR_RSF) : \ + ((__FLAG__) == RTC_FLAG_INITS) ? (READ_BIT(RTC->ICSR, RTC_ICSR_INITS) == \ + RTC_ICSR_INITS) : \ + ((__FLAG__) == RTC_FLAG_SHPF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_SHPF) == \ + RTC_ICSR_SHPF) : \ + ((__FLAG__) == RTC_FLAG_WUTWF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == \ + RTC_ICSR_WUTWF) : \ + ((__FLAG__) == RTC_FLAG_SSRUF) ? (READ_BIT(RTC->SR, RTC_SR_SSRUF) == \ + RTC_SR_SSRUF) : \ + ((__FLAG__) == RTC_FLAG_ITSF) ? (READ_BIT(RTC->SR, RTC_SR_ITSF) == \ + RTC_SR_ITSF) : \ + ((__FLAG__) == RTC_FLAG_TSOVF) ? (READ_BIT(RTC->SR, RTC_SR_TSOVF) == \ + RTC_SR_TSOVF) : \ + ((__FLAG__) == RTC_FLAG_TSF) ? (READ_BIT(RTC->SR, RTC_SR_TSF) == \ + RTC_SR_TSF): \ + ((__FLAG__) == RTC_FLAG_WUTF) ? (READ_BIT(RTC->SR, RTC_SR_WUTF) == \ + RTC_SR_WUTF): \ + ((__FLAG__) == RTC_FLAG_ALRBF) ? (READ_BIT(RTC->SR, RTC_SR_ALRBF) == \ + RTC_SR_ALRBF) : \ + ((__FLAG__) == RTC_FLAG_ALRAF) ? (READ_BIT(RTC->SR, RTC_SR_ALRAF) == \ + RTC_SR_ALRAF) : \ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/* ---------------------------------WAKEUPTIMER---------------------------------*/ +/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer + * @{ + */ + +/** + * @brief Enable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_WUTE)) + +/** + * @brief Disable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_WUTE)) + +/** + * @brief Enable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (RTC_CR_WUTIE)) + +/** + * @brief Disable the RTC WakeUpTimer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(RTC_CR_WUTIE)) + +/** + * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((RTC->MISR) & (RTC_MISR_WUTMF)) != 0U) + +/** + * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_WUT WakeUpTimer interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((RTC->CR) & (RTC_CR_WUTIE)) != 0U) + +/** + * @brief Get the selected RTC WakeUpTimers flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @arg @ref RTC_FLAG_WUTWF + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_WUTF) ? (READ_BIT(RTC->SR, RTC_SR_WUTF) == RTC_SR_WUTF):\ + ((__FLAG__) == RTC_FLAG_WUTWF) ? (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == RTC_ICSR_WUTWF):\ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/** + * @brief Clear the RTC Wake Up timers pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_WUTF + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (WRITE_REG(RTC->SCR, RTC_SCR_CWUTF)) + +/** + * @} + */ + +/* ---------------------------------TIMESTAMP---------------------------------*/ +/** @defgroup RTCEx_Timestamp RTC Timestamp + * @{ + */ + +/** + * @brief Enable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (RTC_CR_TSIE)) + +/** + * @brief Disable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(RTC_CR_TSIE)) + +/** + * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((RTC->MISR) & (RTC_MISR_TSMF)) != 0U) + +/** + * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((RTC->CR) & (RTC_CR_TSIE)) != 0U) + +/** + * @brief Get the selected RTC TimeStamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval The state of __FLAG__ (TRUE or FALSE) or 255 if invalid parameter. + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_TSF) ? (READ_BIT(RTC->SR, RTC_SR_TSF) == RTC_SR_TSF):\ + ((__FLAG__) == RTC_FLAG_TSOVF) ? (READ_BIT(RTC->SR, RTC_SR_TSOVF) == RTC_SR_TSOVF):\ + (0U)) /* Return 0 because it is an invalid parameter value */ + +/** + * @brief Clear the RTC Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)( \ + ((__FLAG__) == RTC_FLAG_TSF) ? (WRITE_REG(RTC->SCR, RTC_SCR_CTSF)):\ + ((__FLAG__) == RTC_FLAG_TSOVF) ? (WRITE_REG(RTC->SCR, RTC_SCR_CTSOVF)):\ + (0U)) /* Dummy action because is an invalid parameter value */ + +/** + * @brief Enable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_ITSE)) + +/** + * @brief Disable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_ITSE)) + +/** + * @brief Get the selected RTC Internal Time Stamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT(RTC->SR, RTC_SR_ITSF) == RTC_SR_ITSF)) + +/** + * @brief Clear the RTC Internal Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (WRITE_REG(RTC->SCR, RTC_SCR_CITSF)) + +/** + * @brief Enable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPTS)) + +/** + * @brief Disable the RTC TimeStamp on Tamper detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPTS)) + +#if defined(RTC_CR_TAMPOE) +/** + * @brief Enable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPOE)) + +/** + * @brief Disable the RTC Tamper detection output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPOE)) + +#endif /* RTC_CR_TAMPOE */ +/** + * @} + */ + + +/* ------------------------------Calibration----------------------------------*/ +/** @defgroup RTCEx_Calibration RTC Calibration + * @{ + */ + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_COE)) + +/** + * @brief Enable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_REFCKON)) + +/** + * @brief Disable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_REFCKON)) + +/** + * @brief Get the selected RTC shift operations flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_SHPF + * @retval The state of __FLAG__ (TRUE or FALSE) + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT(RTC->ICSR, RTC_ICSR_SHPF) == RTC_ICSR_SHPF)) +/** + * @} + */ + +/* ------------------------------Tamper----------------------------------*/ +/** @defgroup RTCEx_Tamper RTCEx tamper + * @{ + */ + +/** + * @brief Enable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the RTC handle. + * @param __TAMPER__ specifies the RTC Tamper source to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_TAMPER_ALL: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 + * @arg RTC_TAMPER_4: Tamper4 + * @arg RTC_TAMPER_5: Tamper5 + * @arg RTC_TAMPER_6: Tamper6 + * @arg RTC_TAMPER_7: Tamper7 + * @arg RTC_TAMPER_8: Tamper8 + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 |= (__TAMPER__)) + +/** + * @brief Disable the TAMP Tamper input detection. + * @param __HANDLE__ specifies the RTC handle. + * @param __TAMPER__ specifies the RTC Tamper sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_TAMPER_ALL: All tampers + * @arg RTC_TAMPER_1: Tamper1 + * @arg RTC_TAMPER_2: Tamper2 + * @arg RTC_TAMPER_3: Tamper3 + * @arg RTC_TAMPER_4: Tamper4 + * @arg RTC_TAMPER_5: Tamper5 + * @arg RTC_TAMPER_6: Tamper6 + * @arg RTC_TAMPER_7: Tamper7 + * @arg RTC_TAMPER_8: Tamper8 + */ +#define __HAL_RTC_TAMPER_DISABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 &= ~(__TAMPER__)) + + +/**************************************************************************************************/ +/** + * @brief Enable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP_ALL: All tampers interrupts + * @arg RTC_IT_TAMP_1: Tamper1 interrupt + * @arg RTC_IT_TAMP_2: Tamper2 interrupt + * @arg RTC_IT_TAMP_3: Tamper3 interrupt + * @arg RTC_IT_TAMP_4: Tamper4 interrupt + * @arg RTC_IT_TAMP_5: Tamper5 interrupt + * @arg RTC_IT_TAMP_6: Tamper6 interrupt + * @arg RTC_IT_TAMP_7: Tamper7 interrupt + * @arg RTC_IT_TAMP_8: Tamper8 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the TAMP Tamper interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP_ALL: All tampers interrupts + * @arg RTC_IT_TAMP_1: Tamper1 interrupt + * @arg RTC_IT_TAMP_2: Tamper2 interrupt + * @arg RTC_IT_TAMP_3: Tamper3 interrupt + * @arg RTC_IT_TAMP_4: Tamper4 interrupt + * @arg RTC_IT_TAMP_5: Tamper5 interrupt + * @arg RTC_IT_TAMP_6: Tamper6 interrupt + * @arg RTC_IT_TAMP_7: Tamper7 interrupt + * @arg RTC_IT_TAMP_8: Tamper8 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER &= ~(__INTERRUPT__)) + + +/**************************************************************************************************/ +/** + * @brief Check whether the specified RTC Tamper interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. + * This parameter can be: + * @arg RTC_IT_TAMP_ALL: All tampers interrupts + * @arg RTC_IT_TAMP_1: Tamper1 interrupt + * @arg RTC_IT_TAMP_2: Tamper2 interrupt + * @arg RTC_IT_TAMP_3: Tamper3 interrupt + * @arg RTC_IT_TAMP_4: Tamper4 interrupt + * @arg RTC_IT_TAMP_5: Tamper5 interrupt + * @arg RTC_IT_TAMP_6: Tamper6 interrupt + * @arg RTC_IT_TAMP_7: Tamper7 interrupt + * @arg RTC_IT_TAMP_8: Tamper8 interrupt + * @arg RTC_IT_INT_TAMP_ALL: All Internal Tamper interrupts + * @arg RTC_IT_INT_TAMP_1: Internal Tamper1 interrupt + * @arg RTC_IT_INT_TAMP_2: Internal Tamper2 interrupt + * @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP_4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt + * @arg RTC_IT_INT_TAMP_7: Internal Tamper7 interrupt + * @arg RTC_IT_INT_TAMP_8: Internal Tamper8 interrupt + * @arg RTC_IT_INT_TAMP_9: Internal Tamper9 interrupt + * @arg RTC_IT_INT_TAMP_11: Internal Tamper11 interrupt + * @arg RTC_IT_INT_TAMP_15: Internal Tamper15 interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE) + */ +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((TAMP->MISR) & (__INTERRUPT__)) != 0U) ? 1UL : 0UL) + +/** + * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TAMP_ALL: All tampers interrupts + * @arg RTC_IT_TAMP_1: Tamper1 interrupt + * @arg RTC_IT_TAMP_2: Tamper2 interrupt + * @arg RTC_IT_TAMP_3: Tamper3 interrupt + * @arg RTC_IT_TAMP_4: Tamper4 interrupt + * @arg RTC_IT_TAMP_5: Tamper5 interrupt + * @arg RTC_IT_TAMP_6: Tamper6 interrupt + * @arg RTC_IT_TAMP_7: Tamper7 interrupt + * @arg RTC_IT_TAMP_8: Tamper8 interrupt + * @arg RTC_IT_INT_TAMP_ALL: All internal tampers interrupts + * @arg RTC_IT_INT_TAMP_1: Internal Tamper1 interrupt + * @arg RTC_IT_INT_TAMP_2: Internal Tamper2 interrupt + * @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt + * @arg RTC_IT_INT_TAMP_4: Internal Tamper4 interrupt + * @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt + * @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt + * @arg RTC_IT_INT_TAMP_7: Internal Tamper7 interrupt + * @arg RTC_IT_INT_TAMP_8: Internal Tamper8 interrupt + * @arg RTC_IT_INT_TAMP_9: Internal Tamper9 interrupt + * @arg RTC_IT_INT_TAMP_11: Internal Tamper11 interrupt + * @arg RTC_IT_INT_TAMP_15: Internal Tamper15 interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE) + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((TAMP->IER) & (__INTERRUPT__)) != \ + 0U) ? 1UL : 0UL) + +/** + * @brief Get the selected RTC Tampers flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_TAMP_ALL: All tampers flag + * @arg RTC_FLAG_TAMP_1: Tamper1 flag + * @arg RTC_FLAG_TAMP_2: Tamper2 flag + * @arg RTC_FLAG_TAMP_3: Tamper3 flag + * @arg RTC_FLAG_TAMP_4: Tamper4 flag + * @arg RTC_FLAG_TAMP_5: Tamper5 flag + * @arg RTC_FLAG_TAMP_6: Tamper6 flag + * @arg RTC_FLAG_TAMP_7: Tamper7 flag + * @arg RTC_FLAG_TAMP_8: Tamper8 flag + * @arg RTC_FLAG_INT_TAMP_1: Internal Tamper1 flag + * @arg RTC_FLAG_INT_TAMP_2: Internal Tamper2 flag + * @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP_4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag + * @arg RTC_FLAG_INT_TAMP_7: Internal Tamper7 flag + * @arg RTC_FLAG_INT_TAMP_8: Internal Tamper8 flag + * @arg RTC_FLAG_INT_TAMP_9: Internal Tamper9 flag + * @arg RTC_FLAG_INT_TAMP_11: Internal Tamper11 flag + * @arg RTC_FLAG_INT_TAMP_15: Internal Tamper15 flag + * @retval The state of __FLAG__ (TRUE or FALSE) + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((TAMP->SR) & (__FLAG__)) != 0U) + +/** + * @brief Clear the RTC Tamper's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Tamper Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_TAMP_ALL: All tampers flag + * @arg RTC_FLAG_TAMP_1: Tamper1 flag + * @arg RTC_FLAG_TAMP_2: Tamper2 flag + * @arg RTC_FLAG_TAMP_3: Tamper3 flag + * @arg RTC_FLAG_TAMP_4: Tamper4 flag + * @arg RTC_FLAG_TAMP_5: Tamper5 flag + * @arg RTC_FLAG_TAMP_6: Tamper6 flag + * @arg RTC_FLAG_TAMP_7: Tamper7 flag + * @arg RTC_FLAG_TAMP_8: Tamper8 flag + * @arg RTC_FLAG_INT_TAMP_ALL: All Internal Tamper flags + * @arg RTC_FLAG_INT_TAMP_1: Internal Tamper1 flag + * @arg RTC_FLAG_INT_TAMP_2: Internal Tamper2 flag + * @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag + * @arg RTC_FLAG_INT_TAMP_4: Internal Tamper4 flag + * @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag + * @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag + * @arg RTC_FLAG_INT_TAMP_7: Internal Tamper7 flag + * @arg RTC_FLAG_INT_TAMP_8: Internal Tamper8 flag + * @arg RTC_FLAG_INT_TAMP_9: Internal Tamper9 flag + * @arg RTC_FLAG_INT_TAMP_11: Internal Tamper11 flag + * @arg RTC_FLAG_INT_TAMP_15: Internal Tamper15 flag + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((TAMP->SCR) = (__FLAG__)) +/** + * @} + */ + +/* --------------------------------- SSR Underflow ---------------------------------*/ +/** @defgroup RTCEx_SSR_Underflow RTC SSR Underflow + * @{ + */ + +/** + * @brief Enable the RTC SSRU interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_SSRU SSRU interrupt + * @retval None + */ +#define __HAL_RTC_SSRU_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (RTC_CR_SSRUIE)) + +/** + * @brief Disable the RTC SSRU interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_SSRU SSRU interrupt + * @retval None + */ +#define __HAL_RTC_SSRU_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(RTC_CR_SSRUIE)) + + +/** + * @brief Check whether the specified RTC SSRU interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC SSRU interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_SSRU SSRU interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE) + */ +#define __HAL_RTC_SSRU_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) & (RTC_MISR_SSRUMF)) != 0U) ? 1U : 0U) +/** + * @brief Check whether the specified RTC SSRU interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_SSRU SSRU interrupt + * @retval The state of __INTERRUPT__ (TRUE or FALSE) + */ +#define __HAL_RTC_SSRU_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (RTC_CR_SSRUIE)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC SSRU's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC SSRU Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_SSRUF + * @retval The state of __FLAG__ (TRUE or FALSE) + */ +#define __HAL_RTC_SSRU_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT(RTC->SR, RTC_SR_SSRUF) == RTC_SR_SSRUF)) + +/** + * @brief Clear the RTC SSRU's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC SSRU Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_SSRUF + * @retval None + */ +#define __HAL_RTC_SSRU_CLEAR_FLAG(__HANDLE__, __FLAG__) (WRITE_REG(RTC->SCR, RTC_SCR_CSSRUF)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/* RTC TimeStamp functions *****************************************/ +/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions + * @{ + */ + +#ifdef RTC_CR_TSE +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +#endif /* RTC_CR_TSE */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(const RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, + RTC_DateTypeDef *sTimeStampDate, uint32_t Format); +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + + +/* RTC Wake-up functions ******************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, + uint32_t WakeUpAutoClr); +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTCEx_GetWakeUpTimer(const RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/* Extended Control functions ************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, + uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +#if defined(RTC_CR_COSEL) +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +#endif /* RTC_CR_COSEL */ +#if defined(RTC_CR_REFCKON) +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +#endif /* RTC_CR_REFCKON */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterIncrement(const RTC_HandleTypeDef *hrtc, uint32_t Instance); +HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterGet(const RTC_HandleTypeDef *hrtc, uint32_t Instance, uint32_t *pValue); +HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc); + +/** + * @} + */ + +/* Extended RTC features functions *******************************************/ +/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions + * @{ + */ + +void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetActiveTampers(RTC_HandleTypeDef *hrtc, const RTC_ActiveTampersTypeDef *sAllTamper); +HAL_StatusTypeDef HAL_RTCEx_SetActiveSeed(RTC_HandleTypeDef *hrtc, const uint32_t *pSeed); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(const RTC_HandleTypeDef *hrtc, uint32_t Tamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateActiveTampers(const RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(const RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(const RTC_HandleTypeDef *hrtc, + const RTC_InternalTamperTypeDef *sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(const RTC_HandleTypeDef *hrtc, + const RTC_InternalTamperTypeDef *sIntTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(const RTC_HandleTypeDef *hrtc, uint32_t IntTamper); +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(const RTC_HandleTypeDef *hrtc, uint32_t IntTamper, + uint32_t Timeout); +#if defined(TAMP_CFGR_BHKLOCK) +HAL_StatusTypeDef HAL_RTCEx_LockBootHardwareKey(const RTC_HandleTypeDef *hrtc); +#endif /* TAMP_CFGR_BHKLOCK */ +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper4EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper5EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper6EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper7EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_Tamper8EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper1EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper2EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper7EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper8EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper9EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper11EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_InternalTamper15EventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions + * @{ + */ +void HAL_RTCEx_BKUPWrite(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); +void HAL_RTCEx_BKUPErase(const RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_BKUPBlock(const RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_BKUPUnblock(const RTC_HandleTypeDef *hrtc); +#ifdef TAMP_RPCFGR_RPCFG0 +void HAL_RTCEx_ConfigEraseDeviceSecrets(const RTC_HandleTypeDef *hrtc, uint32_t DeviceSecretConf); +#endif /* TAMP_RPCFGR_RPCFG0 */ +/** + * @} + */ + +#if defined(TAMP_PRIVCFGR_TAMPPRIV) +/** @defgroup RTCEx_Exported_Functions_Group8 Extended RTC privilege functions + * @{ + */ +HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeSet(const RTC_HandleTypeDef *hrtc, + const RTC_PrivilegeStateTypeDef *privilegeState); +HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeGet(const RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState); +/** + * @} + */ +#endif /* TAMP_PRIVCFGR_TAMPPRIV */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#if defined(RTC_CR_TSEDGE) +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) +#endif /* RTC_CR_TSEDGE */ + +#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) + +#define IS_RTC_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#if defined(RTC_CR_TAMPOE) +#define IS_RTC_TAMPER_TAMPERDETECTIONOUTPUT(MODE) (((MODE) == RTC_TAMPERDETECTIONOUTPUT_ENABLE) || \ + ((MODE) == RTC_TAMPERDETECTIONOUTPUT_DISABLE)) +#endif /* RTC_CR_TAMPOE */ + +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) + +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) + +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) + +#define IS_RTC_LOW_POWER_CALIB(LPCAL) (((LPCAL) == RTC_LPCAL_SET) || \ + ((LPCAL) == RTC_LPCAL_RESET)) + + +#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0U) && \ + (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0U)) + +#define IS_RTC_INTERNAL_TAMPER(__INT_TAMPER__) ((((__INT_TAMPER__) & RTC_INT_TAMPER_ALL) != 0U) && \ + (((__INT_TAMPER__) & ~RTC_INT_TAMPER_ALL) == 0U)) + +#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + +#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ + ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) + +#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ + ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) + +#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ + ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) + +#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ + ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ + ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) + +#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ + ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) + +#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) \ + (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_ATAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_ATAMP_FILTER_ENABLE) || \ + ((__FILTER__) == RTC_ATAMP_FILTER_DISABLE)) + +#define IS_RTC_ATAMPER_OUTPUT_CHANGE_PERIOD(__PERIOD__) ((__PERIOD__) <= 7U) + +#define IS_RTC_ATAMPER_ASYNCPRES_RTCCLK(__PRESCALER__) (((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_2) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_4) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_8) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_16) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_32) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_64) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_128) || \ + ((__PRESCALER__) == RTC_ATAMP_ASYNCPRES_RTCCLK_2048)) + + +#define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) + +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) + +#if defined(RTC_CR_COSEL) +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) +#endif /* RTC_CR_COSEL */ + +#define IS_RTC_PRIVILEGE_FULL(__STATE__) (((__STATE__) == RTC_PRIVILEGE_FULL_YES) || \ + ((__STATE__) == RTC_PRIVILEGE_FULL_NO)) + +#define IS_RTC_PRIVILEGE_FEATURES(__FEATURES__) (((__FEATURES__) & ~RTC_PRIVILEGE_FEATURE_ALL) == 0U) + +#define IS_TAMP_PRIVILEGE_FULL(__STATE__) (((__STATE__) == TAMP_PRIVILEGE_FULL_YES) || \ + ((__STATE__) == TAMP_PRIVILEGE_FULL_NO)) + +#define IS_TAMP_MONOTONIC_CNT_PRIVILEGE(__STATE__) (((__STATE__) == TAMP_MONOTONIC_CNT_PRIVILEGE_YES) || \ + ((__STATE__) == TAMP_MONOTONIC_CNT_PRIVILEGE_NO)) + +#define IS_RTC_PRIVILEGE_BKUP_ZONE(__ZONES__) (((__ZONES__) & ~RTC_PRIVILEGE_BKUP_ZONE_ALL) == 0U) + +#define IS_RTC_BINARY_MODE(MODE) (((MODE) == RTC_BINARY_NONE) || \ + ((MODE) == RTC_BINARY_ONLY) || \ + ((MODE) == RTC_BINARY_MIX )) + +#define IS_RTC_BINARY_MIX_BCDU(BDCU) (((BDCU) == RTC_BINARY_MIX_BCDU_0) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_1) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_2) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_3) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_4) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_5) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_6) || \ + ((BDCU) == RTC_BINARY_MIX_BCDU_7)) + +#define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK) (((MASK) == 0U) || \ + (((MASK) >= RTC_ALARMSUBSECONDBINMASK_SS31_1) &&\ + ((MASK) <= RTC_ALARMSUBSECONDBINMASK_NONE))) + +#define IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(SEL) (((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_NO) || \ + ((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_YES)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_RTC_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai.h new file mode 100644 index 000000000..a40f70c33 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai.h @@ -0,0 +1,968 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sai.h + * @author MCD Application Team + * @brief Header file of SAI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SAI_H +#define STM32H7RSxx_HAL_SAI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SAI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SAI_Exported_Types SAI Exported Types + * @{ + */ + +/** @defgroup SAI_PDM_Structure_definition SAI PDM Structure definition + * @brief SAI PDM Init structure definition + * @{ + */ +typedef struct +{ + FunctionalState Activation; /*!< Enable/disable PDM interface */ + uint32_t MicPairsNbr; /*!< Specifies the number of microphone pairs used. + This parameter must be a number between Min_Data = 1 and Max_Data = 3. */ + uint32_t ClockEnable; /*!< Specifies which clock must be enabled. + This parameter can be a values combination of @ref SAI_PDM_ClockEnable */ +} SAI_PdmInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Init_Structure_definition SAI Init Structure definition + * @brief SAI Init Structure definition + * @{ + */ +typedef struct +{ + uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode. + This parameter can be a value of @ref SAI_Block_Mode */ + + uint32_t Synchro; /*!< Specifies SAI Block synchronization + This parameter can be a value of @ref SAI_Block_Synchronization */ + + uint32_t SynchroExt; /*!< Specifies SAI external output synchronization, this setup is common + for BlockA and BlockB + This parameter can be a value of @ref SAI_Block_SyncExt + @note If both audio blocks of same SAI are used, this parameter has + to be set to the same value for each audio block */ + + uint32_t MckOutput; /*!< Specifies whether master clock output will be generated or not. + This parameter can be a value of @ref SAI_Block_MckOutput */ + + uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven. + This parameter can be a value of @ref SAI_Block_Output_Drive + @note This value has to be set before enabling the audio block + but after the audio block configuration. */ + + uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not. + This parameter can be a value of @ref SAI_Block_NoDivider + @note If bit NODIV in the SAI_xCR1 register is cleared, the frame length + should be aligned to a number equal to a power of 2, from 8 to 256. + If bit NODIV in the SAI_xCR1 register is set, the frame length can + take any of the values from 8 to 256. */ + + uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold. + This parameter can be a value of @ref SAI_Block_Fifo_Threshold */ + + uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling. + This parameter can be a value of @ref SAI_Audio_Frequency */ + + uint32_t Mckdiv; /*!< Specifies the master clock divider. + This parameter must be a number between Min_Data = 0 and Max_Data = 63. + @note This parameter is used only if AudioFrequency is set to + SAI_AUDIO_FREQUENCY_MCKDIV otherwise it is internally computed. */ + + uint32_t MckOverSampling; /*!< Specifies the master clock oversampling. + This parameter can be a value of @ref SAI_Block_Mck_OverSampling */ + + uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected. + This parameter can be a value of @ref SAI_Mono_Stereo_Mode */ + + uint32_t CompandingMode; /*!< Specifies the companding mode type. + This parameter can be a value of @ref SAI_Block_Companding_Mode */ + + uint32_t TriState; /*!< Specifies the companding mode type. + This parameter can be a value of @ref SAI_TRIState_Management */ + + SAI_PdmInitTypeDef PdmInit; /*!< Specifies the PDM configuration. */ + + /* This part of the structure is automatically filled if your are using the high level initialisation + function HAL_SAI_InitProtocol */ + + uint32_t Protocol; /*!< Specifies the SAI Block protocol. + This parameter can be a value of @ref SAI_Block_Protocol */ + + uint32_t DataSize; /*!< Specifies the SAI Block data size. + This parameter can be a value of @ref SAI_Block_Data_Size */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */ + + uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity. + This parameter can be a value of @ref SAI_Block_Clock_Strobing */ +} SAI_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SAI_STATE_RESET = 0x00U, /*!< SAI not yet initialized or disabled */ + HAL_SAI_STATE_READY = 0x01U, /*!< SAI initialized and ready for use */ + HAL_SAI_STATE_BUSY = 0x02U, /*!< SAI internal process is ongoing */ + HAL_SAI_STATE_BUSY_TX = 0x12U, /*!< Data transmission process is ongoing */ + HAL_SAI_STATE_BUSY_RX = 0x22U, /*!< Data reception process is ongoing */ +} HAL_SAI_StateTypeDef; + +/** + * @brief SAI Callback prototype + */ +typedef void (*SAIcallback)(void); + +/** + * @} + */ + +/** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition + * @brief SAI Frame Init structure definition + * @note For SPDIF and AC97 protocol, these parameters are not used (set by hardware). + * @{ + */ +typedef struct +{ + + uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame. + This parameter must be a number between Min_Data = 8 and Max_Data = 256. + @note If master clock MCLK_x pin is declared as an output, the frame length + should be aligned to a number equal to power of 2 in order to keep + in an audio frame, an integer number of MCLK pulses by bit Clock. */ + + uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length. + This Parameter specifies the length in number of bit clock (SCK + 1) + of the active level of FS signal in audio frame. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition. + This parameter can be a value of @ref SAI_Block_FS_Definition */ + + uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity. + This parameter can be a value of @ref SAI_Block_FS_Polarity */ + + uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset. + This parameter can be a value of @ref SAI_Block_FS_Offset */ + +} SAI_FrameInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition + * @brief SAI Block Slot Init Structure definition + * @note For SPDIF protocol, these parameters are not used (set by hardware). + * @note For AC97 protocol, only SlotActive parameter is used (the others are set by hardware). + * @{ + */ +typedef struct +{ + uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot. + This parameter must be a number between Min_Data = 0 and Max_Data = 24 */ + + uint32_t SlotSize; /*!< Specifies the Slot Size. + This parameter can be a value of @ref SAI_Block_Slot_Size */ + + uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ + + uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated. + This parameter can be a value of @ref SAI_Block_Slot_Active */ +} SAI_SlotInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Handle_Structure_definition SAI Handle Structure definition + * @brief SAI handle Structure definition + * @{ + */ +typedef struct __SAI_HandleTypeDef +{ + SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */ + + SAI_InitTypeDef Init; /*!< SAI communication parameters */ + + SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */ + + SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */ + + uint16_t XferSize; /*!< SAI transfer size */ + + uint16_t XferCount; /*!< SAI transfer counter */ + + DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */ + + SAIcallback mutecallback; /*!< SAI mute callback */ + + void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */ + + HAL_LockTypeDef Lock; /*!< SAI locking object */ + + __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */ + + __IO uint32_t ErrorCode; /*!< SAI Error code */ + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + void (*RxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive complete callback */ + void (*RxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive half complete callback */ + void (*TxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit complete callback */ + void (*TxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit half complete callback */ + void (*ErrorCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI error callback */ + void (*MspInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP init callback */ + void (*MspDeInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP de-init callback */ +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} SAI_HandleTypeDef; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/** + * @brief SAI callback ID enumeration definition + */ +typedef enum +{ + HAL_SAI_RX_COMPLETE_CB_ID = 0x00U, /*!< SAI receive complete callback ID */ + HAL_SAI_RX_HALFCOMPLETE_CB_ID = 0x01U, /*!< SAI receive half complete callback ID */ + HAL_SAI_TX_COMPLETE_CB_ID = 0x02U, /*!< SAI transmit complete callback ID */ + HAL_SAI_TX_HALFCOMPLETE_CB_ID = 0x03U, /*!< SAI transmit half complete callback ID */ + HAL_SAI_ERROR_CB_ID = 0x04U, /*!< SAI error callback ID */ + HAL_SAI_MSPINIT_CB_ID = 0x05U, /*!< SAI MSP init callback ID */ + HAL_SAI_MSPDEINIT_CB_ID = 0x06U /*!< SAI MSP de-init callback ID */ +} HAL_SAI_CallbackIDTypeDef; + +/** + * @brief SAI callback pointer definition + */ +typedef void (*pSAI_CallbackTypeDef)(SAI_HandleTypeDef *hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SAI_Exported_Constants SAI Exported Constants + * @{ + */ + +/** @defgroup SAI_Error_Code SAI Error Code + * @{ + */ +#define HAL_SAI_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_SAI_ERROR_OVR 0x00000001U /*!< Overrun Error */ +#define HAL_SAI_ERROR_UDR 0x00000002U /*!< Underrun error */ +#define HAL_SAI_ERROR_AFSDET 0x00000004U /*!< Anticipated Frame synchronisation detection */ +#define HAL_SAI_ERROR_LFSDET 0x00000008U /*!< Late Frame synchronisation detection */ +#define HAL_SAI_ERROR_CNREADY 0x00000010U /*!< codec not ready */ +#define HAL_SAI_ERROR_WCKCFG 0x00000020U /*!< Wrong clock configuration */ +#define HAL_SAI_ERROR_TIMEOUT 0x00000040U /*!< Timeout error */ +#define HAL_SAI_ERROR_DMA 0x00000080U /*!< DMA error */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +#define HAL_SAI_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid callback error */ +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SAI_Block_SyncExt SAI External synchronisation + * @{ + */ +#define SAI_SYNCEXT_DISABLE 0U +#define SAI_SYNCEXT_OUTBLOCKA_ENABLE 1U +#define SAI_SYNCEXT_OUTBLOCKB_ENABLE 2U +/** + * @} + */ + +/** @defgroup SAI_Block_MckOutput SAI Block Master Clock Output + * @{ + */ +#define SAI_MCK_OUTPUT_DISABLE 0x00000000U +#define SAI_MCK_OUTPUT_ENABLE SAI_xCR1_MCKEN +/** + * @} + */ + +/** @defgroup SAI_Protocol SAI Supported protocol + * @{ + */ +#define SAI_I2S_STANDARD 0U +#define SAI_I2S_MSBJUSTIFIED 1U +#define SAI_I2S_LSBJUSTIFIED 2U +#define SAI_PCM_LONG 3U +#define SAI_PCM_SHORT 4U +/** + * @} + */ + +/** @defgroup SAI_Protocol_DataSize SAI protocol data size + * @{ + */ +#define SAI_PROTOCOL_DATASIZE_16BIT 0U +#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED 1U +#define SAI_PROTOCOL_DATASIZE_24BIT 2U +#define SAI_PROTOCOL_DATASIZE_32BIT 3U +/** + * @} + */ + +/** @defgroup SAI_Audio_Frequency SAI Audio Frequency + * @{ + */ +#define SAI_AUDIO_FREQUENCY_192K 192000U +#define SAI_AUDIO_FREQUENCY_96K 96000U +#define SAI_AUDIO_FREQUENCY_48K 48000U +#define SAI_AUDIO_FREQUENCY_44K 44100U +#define SAI_AUDIO_FREQUENCY_32K 32000U +#define SAI_AUDIO_FREQUENCY_22K 22050U +#define SAI_AUDIO_FREQUENCY_16K 16000U +#define SAI_AUDIO_FREQUENCY_11K 11025U +#define SAI_AUDIO_FREQUENCY_8K 8000U +#define SAI_AUDIO_FREQUENCY_MCKDIV 0U +/** + * @} + */ + +/** @defgroup SAI_Block_Mck_OverSampling SAI Block Master Clock OverSampling + * @{ + */ +#define SAI_MCK_OVERSAMPLING_DISABLE 0x00000000U +#define SAI_MCK_OVERSAMPLING_ENABLE SAI_xCR1_OSR +/** + * @} + */ + +/** @defgroup SAI_PDM_ClockEnable SAI PDM Clock Enable + * @{ + */ +#define SAI_PDM_CLOCK1_ENABLE SAI_PDMCR_CKEN1 +#define SAI_PDM_CLOCK2_ENABLE SAI_PDMCR_CKEN2 +/** + * @} + */ + +/** @defgroup SAI_Block_Mode SAI Block Mode + * @{ + */ +#define SAI_MODEMASTER_TX 0x00000000U +#define SAI_MODEMASTER_RX SAI_xCR1_MODE_0 +#define SAI_MODESLAVE_TX SAI_xCR1_MODE_1 +#define SAI_MODESLAVE_RX (SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0) + +/** + * @} + */ + +/** @defgroup SAI_Block_Protocol SAI Block Protocol + * @{ + */ +#define SAI_FREE_PROTOCOL 0x00000000U +#define SAI_SPDIF_PROTOCOL SAI_xCR1_PRTCFG_0 +#define SAI_AC97_PROTOCOL SAI_xCR1_PRTCFG_1 +/** + * @} + */ + +/** @defgroup SAI_Block_Data_Size SAI Block Data Size + * @{ + */ +#define SAI_DATASIZE_8 SAI_xCR1_DS_1 +#define SAI_DATASIZE_10 (SAI_xCR1_DS_1 | SAI_xCR1_DS_0) +#define SAI_DATASIZE_16 SAI_xCR1_DS_2 +#define SAI_DATASIZE_20 (SAI_xCR1_DS_2 | SAI_xCR1_DS_0) +#define SAI_DATASIZE_24 (SAI_xCR1_DS_2 | SAI_xCR1_DS_1) +#define SAI_DATASIZE_32 (SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0) +/** + * @} + */ + +/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission + * @{ + */ +#define SAI_FIRSTBIT_MSB 0x00000000U +#define SAI_FIRSTBIT_LSB SAI_xCR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing + * @{ + */ +#define SAI_CLOCKSTROBING_FALLINGEDGE 0U +#define SAI_CLOCKSTROBING_RISINGEDGE 1U +/** + * @} + */ + +/** @defgroup SAI_Block_Synchronization SAI Block Synchronization + * @{ + */ +#define SAI_ASYNCHRONOUS 0U /*!< Asynchronous */ +#define SAI_SYNCHRONOUS 1U /*!< Synchronous with other block of same SAI */ +#define SAI_SYNCHRONOUS_EXT_SAI1 2U /*!< Synchronous with other SAI, SAI1 */ +#define SAI_SYNCHRONOUS_EXT_SAI2 3U /*!< Synchronous with other SAI, SAI2 */ +/** + * @} + */ + +/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLE 0x00000000U +#define SAI_OUTPUTDRIVE_ENABLE SAI_xCR1_OUTDRIV +/** + * @} + */ + +/** @defgroup SAI_Block_NoDivider SAI Block NoDivider + * @{ + */ +#define SAI_MASTERDIVIDER_ENABLE 0x00000000U +#define SAI_MASTERDIVIDER_DISABLE SAI_xCR1_NODIV +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition + * @{ + */ +#define SAI_FS_STARTFRAME 0x00000000U +#define SAI_FS_CHANNEL_IDENTIFICATION SAI_xFRCR_FSDEF +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity + * @{ + */ +#define SAI_FS_ACTIVE_LOW 0x00000000U +#define SAI_FS_ACTIVE_HIGH SAI_xFRCR_FSPOL +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset + * @{ + */ +#define SAI_FS_FIRSTBIT 0x00000000U +#define SAI_FS_BEFOREFIRSTBIT SAI_xFRCR_FSOFF +/** + * @} + */ + +/** @defgroup SAI_Block_Slot_Size SAI Block Slot Size + * @{ + */ +#define SAI_SLOTSIZE_DATASIZE 0x00000000U +#define SAI_SLOTSIZE_16B SAI_xSLOTR_SLOTSZ_0 +#define SAI_SLOTSIZE_32B SAI_xSLOTR_SLOTSZ_1 +/** + * @} + */ + +/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active + * @{ + */ +#define SAI_SLOT_NOTACTIVE 0x00000000U +#define SAI_SLOTACTIVE_0 0x00000001U +#define SAI_SLOTACTIVE_1 0x00000002U +#define SAI_SLOTACTIVE_2 0x00000004U +#define SAI_SLOTACTIVE_3 0x00000008U +#define SAI_SLOTACTIVE_4 0x00000010U +#define SAI_SLOTACTIVE_5 0x00000020U +#define SAI_SLOTACTIVE_6 0x00000040U +#define SAI_SLOTACTIVE_7 0x00000080U +#define SAI_SLOTACTIVE_8 0x00000100U +#define SAI_SLOTACTIVE_9 0x00000200U +#define SAI_SLOTACTIVE_10 0x00000400U +#define SAI_SLOTACTIVE_11 0x00000800U +#define SAI_SLOTACTIVE_12 0x00001000U +#define SAI_SLOTACTIVE_13 0x00002000U +#define SAI_SLOTACTIVE_14 0x00004000U +#define SAI_SLOTACTIVE_15 0x00008000U +#define SAI_SLOTACTIVE_ALL 0x0000FFFFU +/** + * @} + */ + +/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode + * @{ + */ +#define SAI_STEREOMODE 0x00000000U +#define SAI_MONOMODE SAI_xCR1_MONO +/** + * @} + */ + +/** @defgroup SAI_TRIState_Management SAI TRIState Management + * @{ + */ +#define SAI_OUTPUT_NOTRELEASED 0x00000000U +#define SAI_OUTPUT_RELEASED SAI_xCR2_TRIS +/** + * @} + */ + +/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold + * @{ + */ +#define SAI_FIFOTHRESHOLD_EMPTY 0x00000000U +#define SAI_FIFOTHRESHOLD_1QF SAI_xCR2_FTH_0 +#define SAI_FIFOTHRESHOLD_HF SAI_xCR2_FTH_1 +#define SAI_FIFOTHRESHOLD_3QF (SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0) +#define SAI_FIFOTHRESHOLD_FULL SAI_xCR2_FTH_2 +/** + * @} + */ + +/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode + * @{ + */ +#define SAI_NOCOMPANDING 0x00000000U +#define SAI_ULAW_1CPL_COMPANDING SAI_xCR2_COMP_1 +#define SAI_ALAW_1CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0) +#define SAI_ULAW_2CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_CPL) +#define SAI_ALAW_2CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL) +/** + * @} + */ + +/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value + * @{ + */ +#define SAI_ZERO_VALUE 0x00000000U +#define SAI_LAST_SENT_VALUE SAI_xCR2_MUTEVAL +/** + * @} + */ + +/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition + * @{ + */ +#define SAI_IT_OVRUDR SAI_xIMR_OVRUDRIE +#define SAI_IT_MUTEDET SAI_xIMR_MUTEDETIE +#define SAI_IT_WCKCFG SAI_xIMR_WCKCFGIE +#define SAI_IT_FREQ SAI_xIMR_FREQIE +#define SAI_IT_CNRDY SAI_xIMR_CNRDYIE +#define SAI_IT_AFSDET SAI_xIMR_AFSDETIE +#define SAI_IT_LFSDET SAI_xIMR_LFSDETIE +/** + * @} + */ + +/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition + * @{ + */ +#define SAI_FLAG_OVRUDR SAI_xSR_OVRUDR +#define SAI_FLAG_MUTEDET SAI_xSR_MUTEDET +#define SAI_FLAG_WCKCFG SAI_xSR_WCKCFG +#define SAI_FLAG_FREQ SAI_xSR_FREQ +#define SAI_FLAG_CNRDY SAI_xSR_CNRDY +#define SAI_FLAG_AFSDET SAI_xSR_AFSDET +#define SAI_FLAG_LFSDET SAI_xSR_LFSDET +/** + * @} + */ + +/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level + * @{ + */ +#define SAI_FIFOSTATUS_EMPTY 0x00000000U +#define SAI_FIFOSTATUS_LESS1QUARTERFULL 0x00010000U +#define SAI_FIFOSTATUS_1QUARTERFULL 0x00020000U +#define SAI_FIFOSTATUS_HALFFULL 0x00030000U +#define SAI_FIFOSTATUS_3QUARTERFULL 0x00040000U +#define SAI_FIFOSTATUS_FULL 0x00050000U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SAI_Exported_Macros SAI Exported Macros + * @brief macros to handle interrupts and specific configurations + * @{ + */ + +/** @brief Reset SAI handle state. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SAI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET) +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SAI interrupts. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval None + */ +#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) + +/** @brief Disable the specified SAI interrupts. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval None + */ +#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SAI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the SAI interrupt source to check. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SAI flag is set or not. + * @param __HANDLE__ specifies the SAI Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SAI_FLAG_OVRUDR: Overrun underrun flag. + * @arg SAI_FLAG_MUTEDET: Mute detection flag. + * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag. + * @arg SAI_FLAG_FREQ: FIFO request flag. + * @arg SAI_FLAG_CNRDY: Codec not ready flag. + * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag. + * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified SAI pending flag. + * @param __HANDLE__ specifies the SAI Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun + * @arg SAI_FLAG_MUTEDET: Clear Mute detection + * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration + * @arg SAI_FLAG_FREQ: Clear FIFO request + * @arg SAI_FLAG_CNRDY: Clear Codec not ready + * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection + * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection + * + * @retval None + */ +#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__)) + +/** @brief Enable SAI. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN) + +/** @brief Disable SAI. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN) + +/** + * @} + */ + +/* Include SAI HAL Extension module */ +#include "stm32h7rsxx_hal_sai_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SAI_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup SAI_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); +HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai); +void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai); +void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai); + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/* SAI callbacks register/unregister functions ********************************/ +HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID, + pSAI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/** @addtogroup SAI_Exported_Functions_Group2 + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai); + +/* Abort function */ +HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai); + +/* Mute management */ +HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val); +HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter); +HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai); + +/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai); +void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai); +/** + * @} + */ + +/** @addtogroup SAI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_SAI_StateTypeDef HAL_SAI_GetState(const SAI_HandleTypeDef *hsai); +uint32_t HAL_SAI_GetError(const SAI_HandleTypeDef *hsai); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SAI_Private_Macros SAI Private Macros + * @{ + */ +#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\ + ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\ + ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE)) + +#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\ + ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\ + ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\ + ((PROTOCOL) == SAI_PCM_LONG) ||\ + ((PROTOCOL) == SAI_PCM_SHORT)) + +#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT)) + +#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV)) + +#define IS_SAI_BLOCK_MCK_OVERSAMPLING(VALUE) (((VALUE) == SAI_MCK_OVERSAMPLING_DISABLE) || \ + ((VALUE) == SAI_MCK_OVERSAMPLING_ENABLE)) + +#define IS_SAI_PDM_MIC_PAIRS_NUMBER(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 3U)) + +#define IS_SAI_PDM_CLOCK_ENABLE(CLOCK) (((CLOCK) != 0U) && \ + (((CLOCK) & ~(SAI_PDM_CLOCK1_ENABLE | SAI_PDM_CLOCK2_ENABLE)) == 0U)) + +#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \ + ((MODE) == SAI_MODEMASTER_RX) || \ + ((MODE) == SAI_MODESLAVE_TX) || \ + ((MODE) == SAI_MODESLAVE_RX)) + +#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \ + ((PROTOCOL) == SAI_AC97_PROTOCOL) || \ + ((PROTOCOL) == SAI_SPDIF_PROTOCOL)) + +#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \ + ((DATASIZE) == SAI_DATASIZE_10) || \ + ((DATASIZE) == SAI_DATASIZE_16) || \ + ((DATASIZE) == SAI_DATASIZE_20) || \ + ((DATASIZE) == SAI_DATASIZE_24) || \ + ((DATASIZE) == SAI_DATASIZE_32)) + +#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \ + ((BIT) == SAI_FIRSTBIT_LSB)) + +#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \ + ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE)) + +#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2)) + +#define IS_SAI_BLOCK_MCK_OUTPUT(VALUE) (((VALUE) == SAI_MCK_OUTPUT_ENABLE) || \ + ((VALUE) == SAI_MCK_OUTPUT_DISABLE)) + +#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \ + ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE)) + +#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \ + ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE)) + +#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63U) + +#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \ + ((VALUE) == SAI_LAST_SENT_VALUE)) + +#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \ + ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \ + ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \ + ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \ + ((MODE) == SAI_ALAW_2CPL_COMPANDING)) + +#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL)) + +#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\ + ((STATE) == SAI_OUTPUT_RELEASED)) + +#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\ + ((MODE) == SAI_STEREOMODE)) + +#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) <= SAI_SLOTACTIVE_ALL) + +#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1U <= (NUMBER)) && ((NUMBER) <= 16U)) + +#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \ + ((SIZE) == SAI_SLOTSIZE_16B) || \ + ((SIZE) == SAI_SLOTSIZE_32B)) + +#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24U) + +#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \ + ((OFFSET) == SAI_FS_BEFOREFIRSTBIT)) + +#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \ + ((POLARITY) == SAI_FS_ACTIVE_HIGH)) + +#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \ + ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION)) + +#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 63U) + +#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8U <= (LENGTH)) && ((LENGTH) <= 256U)) + +#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1U <= (LENGTH)) && ((LENGTH) <= 128U)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SAI_Private_Functions SAI Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SAI_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai_ex.h new file mode 100644 index 000000000..7b77bbc89 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sai_ex.h @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sai_ex.h + * @author MCD Application Team + * @brief Header file of SAI HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SAI_EX_H +#define STM32H7RSxx_HAL_SAI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SAIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SAIEx_Exported_Types SAIEx Exported Types + * @{ + */ + +/** + * @brief PDM microphone delay structure definition + */ +typedef struct +{ + uint32_t MicPair; /*!< Specifies which pair of microphones is selected. + This parameter must be a number between Min_Data = 1 and Max_Data = 3. */ + + uint32_t LeftDelay; /*!< Specifies the delay in PDM clock unit to apply on left microphone. + This parameter must be a number between Min_Data = 0 and Max_Data = 7. */ + + uint32_t RightDelay; /*!< Specifies the delay in PDM clock unit to apply on right microphone. + This parameter must be a number between Min_Data = 0 and Max_Data = 7. */ +} SAIEx_PdmMicDelayParamTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SAIEx_Exported_Functions SAIEx Extended Exported Functions + * @{ + */ + +/** @addtogroup SAIEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(const SAI_HandleTypeDef *hsai, + const SAIEx_PdmMicDelayParamTypeDef *pdmMicDelay); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup SAIEx_Private_Macros SAIEx Extended Private Macros + * @{ + */ +#define IS_SAI_PDM_MIC_DELAY(VALUE) ((VALUE) <= 7U) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SAI_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd.h new file mode 100644 index 000000000..8d1c9493b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd.h @@ -0,0 +1,798 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sd.h + * @author MCD Application Team + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SD_H +#define STM32H7RSxx_HAL_SD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_sdmmc.h" +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_SDMMC3) +#include "stm32h7rsxx_ll_dlyb.h" +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (SDMMC1) || defined (SDMMC2) + +/** @defgroup SD SD + * @brief SD HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types + * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */ + HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */ + HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */ + HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */ + HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */ + HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */ + HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfer State */ + HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */ +} HAL_SD_StateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure + * @{ + */ +typedef uint32_t HAL_SD_CardStateTypeDef; + +#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */ +#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ +#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ +#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ +#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ +#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ +#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ +#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ +#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */ +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition + * @{ + */ +#define SD_InitTypeDef SDMMC_InitTypeDef +#define SD_TypeDef SDMMC_TypeDef + +/** + * @brief SD Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t CardVersion; /*!< Specifies the card version */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + + uint32_t CardSpeed; /*!< Specifies the card Speed */ + +} HAL_SD_CardInfoTypeDef; + +/** + * @brief SD handle Structure definition + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +typedef struct __SD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +{ + SD_TypeDef *Instance; /*!< SD registers base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< SD Tx Transfer size */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< SD Rx Transfer size */ + + __IO uint32_t Context; /*!< SD transfer context */ + + __IO HAL_SD_StateTypeDef State; /*!< SD card State */ + + __IO uint32_t ErrorCode; /*!< SD Card Error codes */ + + HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* RxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* ErrorCallback)(struct __SD_HandleTypeDef *hsd); + void (* AbortCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Read_DMALnkLstBufCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Write_DMALnkLstBufCpltCallback)(struct __SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) + void (* DriveTransceiver_1_8V_Callback)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + + void (* MspInitCallback)(struct __SD_HandleTypeDef *hsd); + void (* MspDeInitCallback)(struct __SD_HandleTypeDef *hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +} SD_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGroup; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ +} HAL_SD_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +} HAL_SD_CardCIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 + * @{ + */ +typedef struct +{ + __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ + __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ + __IO uint16_t CardType; /*!< Carries information about card type */ + __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ + __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ + __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ + __IO uint8_t UhsSpeedGrade; /*!< Carries information about the speed grade of UHS card */ + __IO uint8_t UhsAllocationUnitSize; /*!< Carries information about the UHS card's allocation unit size */ + __IO uint8_t VideoSpeedClass; /*!< Carries information about the Video Speed Class of UHS card */ +} HAL_SD_CardStatusTypeDef; +/** + * @} + */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */ + HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */ + HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */ + HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */ + HAL_SD_READ_DMA_LNKLST_BUF_CPLT_CB_ID = 0x04U, /*!< SD DMA Rx Linked List Node buffer Callback ID */ + HAL_SD_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID = 0x05U, /*!< SD DMA Tx Linked List Node buffer Callback ID */ + + HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */ + HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */ +} HAL_SD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition + * @{ + */ +typedef void (*pSD_CallbackTypeDef)(SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) +typedef void (*pSD_TransceiverCallbackTypeDef)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ +/** + * @} + */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants SD Exported Constants + * @{ + */ + +#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ + +/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition + * @{ + */ +#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the */ +/*!< number of transferred bytes does not match the block length */ +#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock */ +/*!< command or if there was an attempt to access a locked card */ +#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out */ +/*!< of erase sequence command was received */ +#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration + * @{ + */ +#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards + * @{ + */ +#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */ +#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */ +#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards + and <104Mo/s for SDR104, Spec version 3.01 */ + +#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */ +#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */ +#define CARD_SECURED ((uint32_t)0x00000003U) + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version + * @{ + */ +#define CARD_V1_X ((uint32_t)0x00000000U) +#define CARD_V2_X ((uint32_t)0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +/** @brief Reset SD handle state. + * @param __HANDLE__ SD Handle. + * @retval None + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET) +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Include SD HAL Extension module */ +#include "stm32h7rsxx_hal_sd_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions + * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); + +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd); +void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd); + +#if (USE_SD_TRANSCEIVER != 0U) +/* Callback to switch in 1.8V mode */ +void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/* SD callback registering/unregistering */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, + pSD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID); + +#if (USE_SD_TRANSCEIVER != 0U) +HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback(SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd); +#endif /* USE_SD_TRANSCEIVER */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); +HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group4 SD card related functions + * @{ + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus); +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_SD_StateTypeDef HAL_SD_GetState(const SD_HandleTypeDef *hsd); +uint32_t HAL_SD_GetError(const SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_SD_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd_ex.h new file mode 100644 index 000000000..a18839025 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sd_ex.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sd_ex.h + * @author MCD Application Team + * @brief Header file of SD HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SD_EX_H +#define STM32H7RSxx_HAL_SD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (SDMMC1) || defined (SDMMC2) + +/** @addtogroup SDEx + * @brief SD HAL extended module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDEx_Exported_Types SDEx Exported Types + * @{ + */ + +/** @defgroup SDEx_Exported_Types_Group1 Linked List Wrapper + * @{ + */ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* -----------------Linked List Wrapper --------------------------------------*/ + +#define SD_DMALinkNodeTypeDef SDMMC_DMALinkNodeTypeDef +#define SD_DMALinkNodeConfTypeDef SDMMC_DMALinkNodeConfTypeDef +#define SD_DMALinkedListTypeDef SDMMC_DMALinkedListTypeDef +/* ----------------- Linked Aliases ------------------------------------------*/ +#define HAL_SDEx_DMALinkedList_WriteCpltCallback HAL_SD_TxCpltCallback +#define HAL_SDEx_DMALinkedList_ReadCpltCallback HAL_SD_RxCpltCallback +/** + * @} + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SDEx_Exported_Functions SDEx Exported Functions + * @{ + */ +/** @defgroup SDEx_Exported_Functions_Group1 Linked List functions + * @{ + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_ReadBlocks(SD_HandleTypeDef *hsd, SD_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_WriteBlocks(SD_HandleTypeDef *hsd, SD_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks); + +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_BuildNode(SD_DMALinkNodeTypeDef *pNode, SD_DMALinkNodeConfTypeDef *pNodeConf); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_InsertNode(SD_DMALinkedListTypeDef *pLinkedList, + SD_DMALinkNodeTypeDef *pPrevNode, SD_DMALinkNodeTypeDef *pNewNode); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_RemoveNode(SD_DMALinkedListTypeDef *pLinkedList, SD_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_LockNode(SD_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_UnlockNode(SD_DMALinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_EnableCircularMode(SD_DMALinkedListTypeDef *pLinkedList); +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_DisableCircularMode(SD_DMALinkedListTypeDef *pLinkedList); + +void HAL_SDEx_Read_DMALnkLstBufCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SDEx_Write_DMALnkLstBufCpltCallback(SD_HandleTypeDef *hsd); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + + +#endif /* stm32h7rsxx_HAL_SD_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sdram.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sdram.h new file mode 100644 index 000000000..34a836362 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sdram.h @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sdram.h + * @author MCD Application Team + * @brief Header file of SDRAM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SDRAM_H +#define STM32H7RSxx_HAL_SDRAM_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_fmc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SDRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SDRAM_Exported_Types SDRAM Exported Types + * @{ + */ + +/** + * @brief HAL SDRAM State structure definition + */ +typedef enum +{ + HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */ + HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */ + HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */ + HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */ + HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */ + HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */ + +} HAL_SDRAM_StateTypeDef; + +/** + * @brief SDRAM handle Structure definition + */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +typedef struct __SDRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +{ + FMC_SDRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */ + + __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */ + + HAL_LockTypeDef Lock; /*!< SDRAM locking object */ + + DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp Init callback */ + void (* MspDeInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp DeInit callback */ + void (* RefreshErrorCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Refresh Error callback */ + void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Error callback */ +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} SDRAM_HandleTypeDef; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SDRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SDRAM_MSP_INIT_CB_ID = 0x00U, /*!< SDRAM MspInit Callback ID */ + HAL_SDRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SDRAM MspDeInit Callback ID */ + HAL_SDRAM_REFRESH_ERR_CB_ID = 0x02U, /*!< SDRAM Refresh Error Callback ID */ + HAL_SDRAM_DMA_XFER_CPLT_CB_ID = 0x03U, /*!< SDRAM DMA Xfer Complete Callback ID */ + HAL_SDRAM_DMA_XFER_ERR_CB_ID = 0x04U /*!< SDRAM DMA Xfer Error Callback ID */ +} HAL_SDRAM_CallbackIDTypeDef; + +/** + * @brief HAL SDRAM Callback pointer definition + */ +typedef void (*pSDRAM_CallbackTypeDef)(SDRAM_HandleTypeDef *hsdram); +typedef void (*pSDRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros + * @{ + */ + +/** @brief Reset SDRAM handle state + * @param __HANDLE__ specifies the SDRAM handle. + * @retval None + */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SDRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET) +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions + * @{ + */ + +/** @addtogroup SDRAM_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions *********************************/ +HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing); +HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram); + +void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/* SDRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_DmaCallbackTypeDef pCallback); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group3 + * @{ + */ +/* SDRAM Control functions *****************************************************/ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram); +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram); +HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate); +HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber); +uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram); + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group4 + * @{ + */ +/* SDRAM State functions ********************************************************/ +HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(const SDRAM_HandleTypeDef *hsdram); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SDRAM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard.h new file mode 100644 index 000000000..d412e27a8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard.h @@ -0,0 +1,1213 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smartcard.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SMARTCARD_H +#define STM32H7RSxx_HAL_SMARTCARD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate))) + where usart_ker_ckpres is the USART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter @ref SMARTCARD_Word_Length can only be + set to 9 (8 data + 1 parity bits). */ + + uint32_t StopBits; /*!< Specifies the number of stop bits. + This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ + + uint16_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note The parity is enabled by default (PCE is forced to 1). + Since the WordLength is forced to 8 bits + parity, M is + forced to 1 and the parity bit is the 9th bit. */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote + is selected. Selecting the single sample method increases + the receiver tolerance to clock deviations. This parameter can be a value + of @ref SMARTCARD_OneBit_Sampling. */ + + uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. + This parameter can be any value from 0x01 to 0x1F. Prescaler value is + multiplied by 2 to give the division factor of the source clock frequency */ + + uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ + + uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled + in case of parity error. + This parameter can be a value of @ref SMARTCARD_NACK_Enable */ + + uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. + This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ + + uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: + it is used to implement the Character Wait Time (CWT) and + Block Wait Time (BWT). It is coded over 24 bits. */ + + uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. + This parameter can be any value from 0x0 to 0xFF */ + + uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in + receive and transmit mode). When set to 0, retransmission is + disabled. Otherwise, its maximum value is 7 (before signalling + an error) */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref SMARTCARD_ClockPrescaler. */ + +} SMARTCARD_InitTypeDef; + +/** + * @brief SMARTCARD advanced features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several + advanced features may be initialized at the same time. This parameter + can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Tx_Inv */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Rx_Inv */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref SMARTCARD_Data_Inv */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref SMARTCARD_MSB_First */ + + uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when + relevant flag is available) or once guard time period has elapsed. + This parameter can be a value + of @ref SMARTCARDEx_Transmission_Completion_Indication. */ +} SMARTCARD_AdvFeatureInitTypeDef; + +/** + * @brief HAL SMARTCARD State definition + * @note HAL SMARTCARD State value is a combination of 2 different substates: + * gState and RxState (see @ref SMARTCARD_State_Definition). + * - gState contains SMARTCARD state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_SMARTCARD_StateTypeDef; + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct __SMARTCARD_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. + This parameter can be a value of + @ref SMARTCARDEx_FIFO_mode. */ + + void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global + Handle management and also related to Tx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */ + + void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */ + + void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */ + + void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */ + + void (* RxFifoFullCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Fifo Full Callback */ + + void (* TxFifoEmptyCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */ + + void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +} SMARTCARD_HandleTypeDef; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMARTCARD Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ + HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ + HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ + HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ + HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ + HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ + HAL_SMARTCARD_RX_FIFO_FULL_CB_ID = 0x06U, /*!< SMARTCARD Rx Fifo Full Callback ID */ + HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID = 0x07U, /*!< SMARTCARD Tx Fifo Empty Callback ID */ + + HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ + HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ + +} HAL_SMARTCARD_CallbackIDTypeDef; + +/** + * @brief HAL SMARTCARD Callback pointer definition + */ +typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */ + +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief SMARTCARD clock sources + */ +typedef enum +{ + SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + SMARTCARD_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + SMARTCARD_CLOCKSOURCE_HSI = 0x04U, /*!< HSI clock source */ + SMARTCARD_CLOCKSOURCE_CSI = 0x08U, /*!< CSI clock source */ + SMARTCARD_CLOCKSOURCE_LSE = 0x20U, /*!< LSE clock source */ + SMARTCARD_CLOCKSOURCE_PLL2Q = 0x40U, /*!< PLL2Q clock source */ + SMARTCARD_CLOCKSOURCE_PLL3Q = 0x80U, /*!< PLL3Q clock source */ + SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */ +} SMARTCARD_ClockSourceTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants + * @{ + */ + +/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition + * @{ + */ +#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized. Value + is allowed for gState and RxState */ +#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for + use. Value is allowed for gState + and RxState */ +#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception + process is ongoing Not to be used for + neither gState nor RxState. + Value is result of combination (Or) + between gState and RxState values */ +#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */ +#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */ +#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode + * @{ + */ +#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */ +#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */ +#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */ +#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */ +#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ +#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */ +#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable + * @{ + */ +#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */ +#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable + * @{ + */ +#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */ +#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_ClockPrescaler SMARTCARD Clock Prescaler + * @{ + */ +#define SMARTCARD_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define SMARTCARD_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define SMARTCARD_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define SMARTCARD_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define SMARTCARD_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define SMARTCARD_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define SMARTCARD_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define SMARTCARD_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define SMARTCARD_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define SMARTCARD_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define SMARTCARD_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define SMARTCARD_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap + * @{ + */ +#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable + * @{ + */ +#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error + * @{ + */ +#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first + * @{ + */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters + * @{ + */ +#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */ +#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask + * @{ + */ +#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */ +#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */ +#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */ +#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */ +#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + +/** @brief Reset SMARTCARD handle states. + * @param __HANDLE__ SMARTCARD handle. + * @retval None + */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** @brief Flush the Smartcard Data registers. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified SMARTCARD pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the SMARTCARD PE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) + +/** @brief Clear the SMARTCARD FE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) + +/** @brief Clear the SMARTCARD NE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) + +/** @brief Clear the SMARTCARD ORE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) + +/** @brief Clear the SMARTCARD IDLE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) + +/** @brief Check whether the specified Smartcard flag is set or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) + * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_BUSY Busy flag + * @arg @ref SMARTCARD_FLAG_EOBF End of block flag + * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag + * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag + * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag + * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag + * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag + * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag + * @arg @ref SMARTCARD_FLAG_NE Noise error flag + * @arg @ref SMARTCARD_FLAG_FE Framing error flag + * @arg @ref SMARTCARD_FLAG_PE Parity error flag + * @arg @ref SMARTCARD_FLAG_TXFNF TXFIFO not full flag + * @arg @ref SMARTCARD_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref SMARTCARD_FLAG_TXFE TXFIFO Empty flag + * @arg @ref SMARTCARD_FLAG_RXFF RXFIFO Full flag + * @arg @ref SMARTCARD_FLAG_RXFT SMARTCARD RXFIFO threshold flag + * @arg @ref SMARTCARD_FLAG_TXFT SMARTCARD TXFIFO threshold flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before + * guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))):\ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Disable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard + * time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Check whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) (\ + (((__HANDLE__)->Instance->ISR & (0x01UL << (((__INTERRUPT__)\ + & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS)))!= 0U)\ + ? SET : RESET) + +/** @brief Check whether the specified SmartCard interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x01U)?\ + (__HANDLE__)->Instance->CR1 : \ + (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x02U)?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) &\ + (0x01UL << (((uint16_t)(__INTERRUPT__))\ + & SMARTCARD_IT_MASK))) != 0U)\ + ? SET : RESET) + +/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific SMARTCARD request flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request + * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable the USART associated to the SMARTCARD Handle. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros -------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros + * @{ + */ + +/** @brief Report the SMARTCARD clock source. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__. + */ +#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED;\ + break; \ + } \ + } \ + else if(((__HANDLE__)->Instance == USART2) || \ + ((__HANDLE__)->Instance == USART3)) \ + { \ + switch(__HAL_RCC_GET_USART234578_SOURCE()) \ + { \ + case RCC_USART234578CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART234578CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART234578CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART234578CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED;\ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + + +/** @brief Check the Baud rate range. + * @note The maximum Baud Rate is derived from the maximum clock on H7RS (100 MHz) + * divided by the oversampling used on the SMARTCARD (i.e. 16). + * @param __BAUDRATE__ Baud rate set by the configuration function. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6250001U) + +/** @brief Check the block length range. + * @note The maximum SMARTCARD block length is 0xFF. + * @param __LENGTH__ block length. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) + +/** @brief Check the receiver timeout value. + * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** @brief Check the SMARTCARD autoretry counter value. + * @note The maximum number of retransmissions is 0x7. + * @param __COUNT__ number of retransmissions. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) + +/** @brief Ensure that SMARTCARD frame length is valid. + * @param __LENGTH__ SMARTCARD frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) + +/** @brief Ensure that SMARTCARD frame number of stop bits is valid. + * @param __STOPBITS__ SMARTCARD frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ + ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) + +/** @brief Ensure that SMARTCARD frame parity is valid. + * @param __PARITY__ SMARTCARD frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ + ((__PARITY__) == SMARTCARD_PARITY_ODD)) + +/** @brief Ensure that SMARTCARD communication mode is valid. + * @param __MODE__ SMARTCARD communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that SMARTCARD frame polarity is valid. + * @param __CPOL__ SMARTCARD frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\ + || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) + +/** @brief Ensure that SMARTCARD frame phase is valid. + * @param __CPHA__ SMARTCARD frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) + +/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. + * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) + +/** @brief Ensure that SMARTCARD frame sampling is valid. + * @param __ONEBIT__ SMARTCARD frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that SMARTCARD NACK transmission setting is valid. + * @param __NACK__ SMARTCARD NACK transmission setting. + * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) + */ +#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ + ((__NACK__) == SMARTCARD_NACK_DISABLE)) + +/** @brief Ensure that SMARTCARD receiver timeout setting is valid. + * @param __TIMEOUT__ SMARTCARD receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) + +/** @brief Ensure that SMARTCARD clock Prescaler is valid. + * @param __CLOCKPRESCALER__ SMARTCARD clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_SMARTCARD_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV256)) + +/** @brief Ensure that SMARTCARD advanced features initialization is valid. + * @param __INIT__ SMARTCARD advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ + SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ + SMARTCARD_ADVFEATURE_SWAP_INIT | \ + SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ + SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + +/** @brief Ensure that SMARTCARD frame TX inversion setting is valid. + * @param __TXINV__ SMARTCARD frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX inversion setting is valid. + * @param __RXINV__ SMARTCARD frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame data inversion setting is valid. + * @param __DATAINV__ SMARTCARD frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. + * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) + +/** @brief Ensure that SMARTCARD frame overrun setting is valid. + * @param __OVERRUN__ SMARTCARD frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) + +/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. + * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** @brief Ensure that SMARTCARD frame MSB first setting is valid. + * @param __MSBFIRST__ SMARTCARD frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) + +/** @brief Ensure that SMARTCARD request parameter is valid. + * @param __PARAM__ SMARTCARD request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) + +/** + * @} + */ + +/* Include SMARTCARD HAL Extended module */ +#include "stm32h7rsxx_hal_smartcard_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARD_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); + +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group4 + * @{ + */ + +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsmartcard); +uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SMARTCARD_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard_ex.h new file mode 100644 index 000000000..bbba3f9b0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smartcard_ex.h @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smartcard_ex.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SMARTCARD_EX_H +#define STM32H7RSxx_HAL_SMARTCARD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @addtogroup SMARTCARDEx_Exported_Constants SMARTCARD Extended Exported Constants + * @{ + */ + +/** @defgroup SMARTCARDEx_Transmission_Completion_Indication SMARTCARD Transmission Completion Indication + * @{ + */ +#define SMARTCARD_TCBGT SMARTCARD_IT_TCBGT /*!< SMARTCARD transmission complete before guard time */ +#define SMARTCARD_TC SMARTCARD_IT_TC /*!< SMARTCARD transmission complete (flag raised when guard time has elapsed) */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type + * @{ + */ +#define SMARTCARD_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define SMARTCARD_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define SMARTCARD_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +#define SMARTCARD_ADVFEATURE_TXCOMPLETION 0x00000100U /*!< TX completion indication before of after guard time */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_FIFO_mode SMARTCARD FIFO mode + * @brief SMARTCARD FIFO mode + * @{ + */ +#define SMARTCARD_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define SMARTCARD_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_TXFIFO_threshold_level SMARTCARD TXFIFO threshold level + * @brief SMARTCARD TXFIFO level + * @{ + */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_RXFIFO_threshold_level SMARTCARD RXFIFO threshold level + * @brief SMARTCARD RXFIFO level + * @{ + */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define SMARTCARD_FLAG_TCBGT USART_ISR_TCBGT /*!< SMARTCARD transmission complete before guard time completion */ +#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */ +#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */ +#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */ +#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */ +#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */ +#define SMARTCARD_FLAG_TXE USART_ISR_TXE_TXFNF /*!< SMARTCARD transmit data register empty */ +#define SMARTCARD_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< SMARTCARD TXFIFO not full */ +#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */ +#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD read data register not empty */ +#define SMARTCARD_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD RXFIFO not empty */ +#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */ +#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */ +#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */ +#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */ +#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */ +#define SMARTCARD_FLAG_TXFE USART_ISR_TXFE /*!< SMARTCARD TXFIFO Empty flag */ +#define SMARTCARD_FLAG_RXFF USART_ISR_RXFF /*!< SMARTCARD RXFIFO Full flag */ +#define SMARTCARD_FLAG_RXFT USART_ISR_RXFT /*!< SMARTCARD RXFIFO threshold flag */ +#define SMARTCARD_FLAG_TXFT USART_ISR_TXFT /*!< SMARTCARD TXFIFO threshold flag */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5 bits) + * - XX : Interrupt source register (2 bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5 bits) + * @{ + */ +#define SMARTCARD_IT_PE 0x0028U /*!< SMARTCARD parity error interruption */ +#define SMARTCARD_IT_TXE 0x0727U /*!< SMARTCARD transmit data register empty interruption */ +#define SMARTCARD_IT_TXFNF 0x0727U /*!< SMARTCARD TX FIFO not full interruption */ +#define SMARTCARD_IT_TC 0x0626U /*!< SMARTCARD transmission complete interruption */ +#define SMARTCARD_IT_RXNE 0x0525U /*!< SMARTCARD read data register not empty interruption */ +#define SMARTCARD_IT_RXFNE 0x0525U /*!< SMARTCARD RXFIFO not empty interruption */ +#define SMARTCARD_IT_IDLE 0x0424U /*!< SMARTCARD idle line detection interruption */ + +#define SMARTCARD_IT_ERR 0x0060U /*!< SMARTCARD error interruption */ +#define SMARTCARD_IT_ORE 0x0300U /*!< SMARTCARD overrun error interruption */ +#define SMARTCARD_IT_NE 0x0200U /*!< SMARTCARD noise error interruption */ +#define SMARTCARD_IT_FE 0x0100U /*!< SMARTCARD frame error interruption */ + +#define SMARTCARD_IT_EOB 0x0C3BU /*!< SMARTCARD end of block interruption */ +#define SMARTCARD_IT_RTO 0x0B3AU /*!< SMARTCARD receiver timeout interruption */ +#define SMARTCARD_IT_TCBGT 0x1978U /*!< SMARTCARD transmission complete before guard time completion interruption */ + +#define SMARTCARD_IT_RXFF 0x183FU /*!< SMARTCARD RXFIFO full interruption */ +#define SMARTCARD_IT_TXFE 0x173EU /*!< SMARTCARD TXFIFO empty interruption */ +#define SMARTCARD_IT_RXFT 0x1A7CU /*!< SMARTCARD RXFIFO threshold reached interruption */ +#define SMARTCARD_IT_TXFT 0x1B77U /*!< SMARTCARD TXFIFO threshold reached interruption */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags + * @{ + */ +#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */ +#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */ +#define SMARTCARD_CLEAR_NEF USART_ICR_NECF /*!< SMARTCARD noise error detected clear flag */ +#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */ +#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */ +#define SMARTCARD_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty Clear Flag */ +#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */ +#define SMARTCARD_CLEAR_TCBGTF USART_ICR_TCBGTCF /*!< SMARTCARD transmission complete before guard time completion clear flag */ +#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */ +#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Macros SMARTCARD Extended Private Macros + * @{ + */ + +/** @brief Set the Transmission Completion flag + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if + * AdvancedInit.TxCompletionIndication is not already filled, the latter is forced + * to SMARTCARD_TC (transmission completion indication when guard time has elapsed). + * @retval None + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \ + do { \ + if (HAL_IS_BIT_CLR((__HANDLE__)->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXCOMPLETION)) \ + { \ + (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \ + } \ + else \ + { \ + assert_param(IS_SMARTCARD_TRANSMISSION_COMPLETION((__HANDLE__)->AdvancedInit.TxCompletionIndication)); \ + } \ + } while(0U) + +/** @brief Return the transmission completion flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note Based on AdvancedInit.TxCompletionIndication setting, return TC or TCBGT flag. + * When TCBGT flag (Transmission Complete Before Guard Time) is not available, TC flag is + * reported. + * @retval Transmission completion flag + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) \ + (((__HANDLE__)->AdvancedInit.TxCompletionIndication == SMARTCARD_TC) ? (SMARTCARD_FLAG_TC) : (SMARTCARD_FLAG_TCBGT)) + + +/** @brief Ensure that SMARTCARD frame transmission completion used flag is valid. + * @param __TXCOMPLETE__ SMARTCARD frame transmission completion used flag. + * @retval SET (__TXCOMPLETE__ is valid) or RESET (__TXCOMPLETE__ is invalid) + */ +#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) (((__TXCOMPLETE__) == SMARTCARD_TCBGT) || \ + ((__TXCOMPLETE__) == SMARTCARD_TC)) + +/** @brief Ensure that SMARTCARD FIFO mode is valid. + * @param __STATE__ SMARTCARD FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_SMARTCARD_FIFOMODE_STATE(__STATE__) (((__STATE__) == SMARTCARD_FIFOMODE_DISABLE ) || \ + ((__STATE__) == SMARTCARD_FIFOMODE_ENABLE)) + +/** @brief Ensure that SMARTCARD TXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_8_8)) + +/** @brief Ensure that SMARTCARD RXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation methods *******************************************************/ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group1 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength); +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue); +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions_Group2 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SMARTCARD_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus.h new file mode 100644 index 000000000..567e78c15 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus.h @@ -0,0 +1,787 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smbus.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SMBUS_H +#define STM32H7RSxx_HAL_SMBUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Types SMBUS Exported Types + * @{ + */ + +/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition + * @brief SMBUS Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value. + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ + uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. + This parameter can be a value of @ref SMBUS_Analog_Filter */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit address. */ + + uint32_t AddressingMode; /*!< Specifies addressing mode selected. + This parameter can be a value of @ref SMBUS_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref SMBUS_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address + if dual addressing mode is selected + This parameter can be a value of @ref SMBUS_own_address2_masks. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref SMBUS_nostretch_mode */ + + uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. + This parameter can be a value of @ref SMBUS_packet_error_check_mode */ + + uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. + This parameter can be a value of @ref SMBUS_peripheral_mode */ + + uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. + (Enable bits and different timeout values) + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ +} SMBUS_InitTypeDef; +/** + * @} + */ + +/** @defgroup HAL_state_definition HAL state definition + * @brief HAL State definition + * @{ + */ +#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */ +#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */ +#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ +/** + * @} + */ + +/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition + * @brief SMBUS Error Code definition + * @{ + */ +#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ +#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ +#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ +#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ +#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition + * @brief SMBUS handle Structure definition + * @{ + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +typedef struct __SMBUS_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +{ + I2C_TypeDef *Instance; /*!< SMBUS registers base address */ + + SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ + + uint16_t XferSize; /*!< SMBUS transfer size */ + + __IO uint16_t XferCount; /*!< SMBUS transfer counter */ + + __IO uint32_t XferOptions; /*!< SMBUS transfer options */ + + __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */ + + HAL_LockTypeDef Lock; /*!< SMBUS locking object */ + + __IO uint32_t State; /*!< SMBUS communication state */ + + __IO uint32_t ErrorCode; /*!< SMBUS Error code */ + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Listen Complete callback */ + void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Error callback */ + + void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< SMBUS Slave Address Match callback */ + + void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp Init callback */ + void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp DeInit callback */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +} SMBUS_HandleTypeDef; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMBUS Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ + HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ + HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ + HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */ + + HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */ + HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */ + +} HAL_SMBUS_CallbackIDTypeDef; + +/** + * @brief HAL SMBUS Callback pointer definition + */ +typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); +/*!< pointer to an SMBUS callback function */ +typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an SMBUS Address Match callback function */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants + * @{ + */ + +/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter + * @{ + */ +#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U) +#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup SMBUS_addressing_mode SMBUS addressing mode + * @{ + */ +#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U) +/** + * @} + */ + +/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode + * @{ + */ + +#define SMBUS_DUALADDRESS_DISABLE (0x00000000U) +#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks + * @{ + */ + +#define SMBUS_OA2_NOMASK ((uint8_t)0x00U) +#define SMBUS_OA2_MASK01 ((uint8_t)0x01U) +#define SMBUS_OA2_MASK02 ((uint8_t)0x02U) +#define SMBUS_OA2_MASK03 ((uint8_t)0x03U) +#define SMBUS_OA2_MASK04 ((uint8_t)0x04U) +#define SMBUS_OA2_MASK05 ((uint8_t)0x05U) +#define SMBUS_OA2_MASK06 ((uint8_t)0x06U) +#define SMBUS_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + + +/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode + * @{ + */ +#define SMBUS_GENERALCALL_DISABLE (0x00000000U) +#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode + * @{ + */ +#define SMBUS_NOSTRETCH_DISABLE (0x00000000U) +#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode + * @{ + */ +#define SMBUS_PEC_DISABLE (0x00000000U) +#define SMBUS_PEC_ENABLE I2C_CR1_PECEN +/** + * @} + */ + +/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode + * @{ + */ +#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U) +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN +/** + * @} + */ + +/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition + * @{ + */ + +#define SMBUS_SOFTEND_MODE (0x00000000U) +#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD +#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND +#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE +/** + * @} + */ + +/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition + * @{ + */ + +#define SMBUS_NO_STARTSTOP (0x00000000U) +#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition + * @{ + */ + +/* List of XferOptions in usage of : + * 1- Restart condition when direction change + * 2- No Restart condition in other use cases + */ +#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE +#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) +#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) +#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) +#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) +/** + * @} + */ + +/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition + * @brief SMBUS Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define SMBUS_IT_ERRI I2C_CR1_ERRIE +#define SMBUS_IT_TCI I2C_CR1_TCIE +#define SMBUS_IT_STOPI I2C_CR1_STOPIE +#define SMBUS_IT_NACKI I2C_CR1_NACKIE +#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE +#define SMBUS_IT_RXI I2C_CR1_RXIE +#define SMBUS_IT_TXI I2C_CR1_TXIE +#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \ + SMBUS_IT_NACKI | SMBUS_IT_TXI) +#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \ + SMBUS_IT_RXI) +#define SMBUS_IT_ALERT (SMBUS_IT_ERRI) +#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI) +/** + * @} + */ + +/** @defgroup SMBUS_Flag_definition SMBUS Flag definition + * @brief Flag definition + * Elements values convention: 0xXXXXYYYY + * - XXXXXXXX : Flag mask + * @{ + */ + +#define SMBUS_FLAG_TXE I2C_ISR_TXE +#define SMBUS_FLAG_TXIS I2C_ISR_TXIS +#define SMBUS_FLAG_RXNE I2C_ISR_RXNE +#define SMBUS_FLAG_ADDR I2C_ISR_ADDR +#define SMBUS_FLAG_AF I2C_ISR_NACKF +#define SMBUS_FLAG_STOPF I2C_ISR_STOPF +#define SMBUS_FLAG_TC I2C_ISR_TC +#define SMBUS_FLAG_TCR I2C_ISR_TCR +#define SMBUS_FLAG_BERR I2C_ISR_BERR +#define SMBUS_FLAG_ARLO I2C_ISR_ARLO +#define SMBUS_FLAG_OVR I2C_ISR_OVR +#define SMBUS_FLAG_PECERR I2C_ISR_PECERR +#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define SMBUS_FLAG_ALERT I2C_ISR_ALERT +#define SMBUS_FLAG_BUSY I2C_ISR_BUSY +#define SMBUS_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros + * @{ + */ + +/** @brief Reset SMBUS handle state. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SMBUS interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SMBUS flag is set or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status + * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode) + * @arg @ref SMBUS_FLAG_TCR Transfer complete reload + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * @arg @ref SMBUS_FLAG_BUSY Bus busy + * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define SMBUS_FLAG_MASK (0x0001FFFFU) +#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \ + (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) + +/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == SMBUS_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Macro SMBUS Private Macros + * @{ + */ + +#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ + ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) + +#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_SMBUS_ADDRESSING_MODE(MODE) ((MODE) == SMBUS_ADDRESSINGMODE_7BIT) + +#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) + +#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \ + ((MASK) == SMBUS_OA2_MASK01) || \ + ((MASK) == SMBUS_OA2_MASK02) || \ + ((MASK) == SMBUS_OA2_MASK03) || \ + ((MASK) == SMBUS_OA2_MASK04) || \ + ((MASK) == SMBUS_OA2_MASK05) || \ + ((MASK) == SMBUS_OA2_MASK06) || \ + ((MASK) == SMBUS_OA2_MASK07)) + +#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ + ((CALL) == SMBUS_GENERALCALL_ENABLE)) + +#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ + ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) + +#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ + ((PEC) == SMBUS_PEC_ENABLE)) + +#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) + +#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \ + ((MODE) == SMBUS_AUTOEND_MODE) || \ + ((MODE) == SMBUS_SOFTEND_MODE) || \ + ((MODE) == SMBUS_SENDPEC_MODE) || \ + ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \ + SMBUS_RELOAD_MODE ))) + + +#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \ + ((REQUEST) == SMBUS_GENERATE_START_READ) || \ + ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \ + ((REQUEST) == SMBUS_NO_STARTSTOP)) + + +#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ + ((REQUEST) == SMBUS_FIRST_FRAME) || \ + ((REQUEST) == SMBUS_NEXT_FRAME) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) + +#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) + +#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \ + (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \ + I2C_CR1_PECEN))) +#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & \ + (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \ + (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U) +#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U) +#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE) +#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN) + +#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) +#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +/** + * @} + */ + +/* Include SMBUS HAL Extended module */ +#include "stm32h7rsxx_hal_smbus_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup Blocking_mode_Polling Blocking mode Polling + * @{ + */ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt + * @{ + */ +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); + +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus); +uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions are defined in stm32h7rsxx_hal_smbus.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_SMBUS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus_ex.h new file mode 100644 index 000000000..605436de8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_smbus_ex.h @@ -0,0 +1,133 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smbus_ex.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SMBUS_EX_H +#define STM32H7RSxx_HAL_SMBUS_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUSEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants + * @{ + */ + +/** @defgroup SMBUSEx_FastModePlus SMBUS Extended Fast Mode Plus + * @{ + */ +#define SMBUS_FASTMODEPLUS_ENABLE 0x00000000U /*!< Enable Fast Mode Plus */ +#define SMBUS_FASTMODEPLUS_DISABLE 0x00000001U /*!< Disable Fast Mode Plus */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Macros SMBUS Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_SMBUSEx_EnableWakeUp(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUSEx_DisableWakeUp(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +HAL_StatusTypeDef HAL_SMBUSEx_ConfigFastModePlus(SMBUS_HandleTypeDef *hsmbus, uint32_t FastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Constants SMBUS Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Macro SMBUS Extended Private Macros + * @{ + */ +#define IS_SMBUS_FASTMODEPLUS(__CONFIG__) (((__CONFIG__) == (SMBUS_FASTMODEPLUS_ENABLE)) || \ + ((__CONFIG__) == (SMBUS_FASTMODEPLUS_DISABLE))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Functions SMBUS Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32h7rsxx_hal_smbus_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SMBUS_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spdifrx.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spdifrx.h new file mode 100644 index 000000000..ee54bed4d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spdifrx.h @@ -0,0 +1,622 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spdifrx.h + * @author MCD Application Team + * @brief Header file of SPDIFRX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SPDIFRX_H +#define STM32H7RSxx_HAL_SPDIFRX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (SPDIFRX) + +/** @addtogroup SPDIFRX + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types + * @{ + */ + +/** + * @brief SPDIFRX Init structure definition + */ +typedef struct +{ + uint32_t InputSelection; /*!< Specifies the SPDIF input selection. + This parameter can be a value of @ref SPDIFRX_Input_Selection */ + + uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. + This parameter can be a value of @ref SPDIFRX_Max_Retries */ + + uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. + This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ + + uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status + from channel A or B. + This parameter can be a value of @ref SPDIFRX_Channel_Selection */ + + uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). + This parameter can be a value of @ref SPDIFRX_Data_Format */ + + uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. + This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ + + uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_PT_Mask */ + + uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ + + uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_V_Mask */ + + uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_PE_Mask */ + FunctionalState SymbolClockGen; /*!< Enable/Disable the SPDIFRX Symbol Clock generation. + This parameter can be set to Enable or Disable */ + + FunctionalState BackupSymbolClockGen; /*!< Enable/Disable the SPDIFRX Backup Symbol Clock generation. + This parameter can be set to Enable or Disable */ +} SPDIFRX_InitTypeDef; + +/** + * @brief SPDIFRX SetDataFormat structure definition + */ +typedef struct +{ + uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). + This parameter can be a value of @ref SPDIFRX_Data_Format */ + + uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. + This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ + + uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_PT_Mask */ + + uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ + + uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_V_Mask */ + + uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not + into the received frame. + This parameter can be a value of @ref SPDIFRX_PE_Mask */ + +} SPDIFRX_SetDataFormatTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */ + HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */ + HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */ + HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */ + HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */ + HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */ +} HAL_SPDIFRX_StateTypeDef; + +/** + * @brief SPDIFRX handle Structure definition + */ +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +typedef struct __SPDIFRX_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +{ + SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ + + SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ + + uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ + + uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ + + __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ + + __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ + + __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information + DMA handle parameters */ + + DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ + + __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ + + __IO uint32_t ErrorCode; /* SPDIFRX Error code */ + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + void (*RxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow half completed + callback */ + void (*RxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow completed callback */ + void (*CxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow half completed + callback */ + void (*CxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow completed callback */ + void (*ErrorCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX error callback */ + void (* MspInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp Init callback */ + void (* MspDeInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp DeInit callback */ +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + +} SPDIFRX_HandleTypeDef; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SPDIFRX Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPDIFRX_RX_HALF_CB_ID = 0x00U, /*!< SPDIFRX Data flow half completed callback ID */ + HAL_SPDIFRX_RX_CPLT_CB_ID = 0x01U, /*!< SPDIFRX Data flow completed callback */ + HAL_SPDIFRX_CX_HALF_CB_ID = 0x02U, /*!< SPDIFRX Control flow half completed callback */ + HAL_SPDIFRX_CX_CPLT_CB_ID = 0x03U, /*!< SPDIFRX Control flow completed callback */ + HAL_SPDIFRX_ERROR_CB_ID = 0x04U, /*!< SPDIFRX error callback */ + HAL_SPDIFRX_MSPINIT_CB_ID = 0x05U, /*!< SPDIFRX Msp Init callback ID */ + HAL_SPDIFRX_MSPDEINIT_CB_ID = 0x06U /*!< SPDIFRX Msp DeInit callback ID */ +} HAL_SPDIFRX_CallbackIDTypeDef; + +/** + * @brief HAL SPDIFRX Callback pointer definition + */ +typedef void (*pSPDIFRX_CallbackTypeDef)(SPDIFRX_HandleTypeDef *hspdif); /*!< pointer to an SPDIFRX callback + function */ +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants + * @{ + */ +/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code + * @{ + */ +#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ +#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002U) /*!< OVR error */ +#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004U) /*!< Parity error */ +#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA transfer error */ +#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010U) /*!< Unknown Error error */ +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +#define HAL_SPDIFRX_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection + * @{ + */ +#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000U) +#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000U) +#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000U) +#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000U) +/** + * @} + */ + +/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries + * @{ + */ +#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000U) +#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000U) +#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000U) +#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000U) +/** + * @} + */ + +/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity + * @{ + */ +#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000U) +#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) +/** + * @} + */ + +/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask + * @{ + */ +#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000U) +#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask + * @{ + */ +#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000U) /* The channel status and user bits are copied + into the SPDIF_DR */ +#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied + into the SPDIF_DR, zeros are written instead*/ +/** + * @} + */ + +/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask + * @{ + */ +#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000U) +#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask + * @{ + */ +#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000U) +#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection + * @{ + */ +#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000U) +#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) +/** + * @} + */ + +/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format + * @{ + */ +#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000U) +#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010U) +#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020U) +/** + * @} + */ + +/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode + * @{ + */ +#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000U) +#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) +/** + * @} + */ + +/** @defgroup SPDIFRX_State SPDIFRX State + * @{ + */ + +#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFCU) +#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001U) +#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFRXEN) +/** + * @} + */ + +/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition + * @{ + */ +#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) +#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) +#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) +#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) +#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) +#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) +#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) +/** + * @} + */ + +/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition + * @{ + */ +#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) +#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) +#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) +#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) +#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) +#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) +#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) +#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) +#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros + * @{ + */ + +/** @brief Reset SPDIFRX handle state + * @param __HANDLE__ SPDIFRX handle. + * @retval None + */ +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET) +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + +/** @brief Disable the specified SPDIFRX peripheral (IDLE State). + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) + +/** @brief Enable the specified SPDIFRX peripheral (SYNC State). + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) + + +/** @brief Enable the specified SPDIFRX peripheral (RCV State). + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) + + +/** @brief Enable or disable the specified SPDIFRX interrupts. + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPDIFRX_IT_RXNE + * @arg SPDIFRX_IT_CSRNE + * @arg SPDIFRX_IT_PERRIE + * @arg SPDIFRX_IT_OVRIE + * @arg SPDIFRX_IT_SBLKIE + * @arg SPDIFRX_IT_SYNCDIE + * @arg SPDIFRX_IT_IFEIE + * @retval None + */ +#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) +#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR\ + &= (uint16_t)(~(__INTERRUPT__))) + +/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @param __INTERRUPT__ specifies the SPDIFRX interrupt source to check. + * This parameter can be one of the following values: + * @arg SPDIFRX_IT_RXNE + * @arg SPDIFRX_IT_CSRNE + * @arg SPDIFRX_IT_PERRIE + * @arg SPDIFRX_IT_OVRIE + * @arg SPDIFRX_IT_SBLKIE + * @arg SPDIFRX_IT_SYNCDIE + * @arg SPDIFRX_IT_IFEIE + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified SPDIFRX flag is set or not. + * @param __HANDLE__ specifies the SPDIFRX Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPDIFRX_FLAG_RXNE + * @arg SPDIFRX_FLAG_CSRNE + * @arg SPDIFRX_FLAG_PERR + * @arg SPDIFRX_FLAG_OVR + * @arg SPDIFRX_FLAG_SBD + * @arg SPDIFRX_FLAG_SYNCD + * @arg SPDIFRX_FLAG_FERR + * @arg SPDIFRX_FLAG_SERR + * @arg SPDIFRX_FLAG_TERR + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->SR)\ + & (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. + * @param __HANDLE__ specifies the USART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg SPDIFRX_FLAG_PERR + * @arg SPDIFRX_FLAG_OVR + * @arg SPDIFRX_SR_SBD + * @arg SPDIFRX_SR_SYNCD + * @retval None + */ +#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPDIFRX_Exported_Functions + * @{ + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); +HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); +HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, + pSPDIFRX_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, + HAL_SPDIFRX_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +/** + * @} + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif); +uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros + * @{ + */ +#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ + ((INPUT) == SPDIFRX_INPUT_IN2) || \ + ((INPUT) == SPDIFRX_INPUT_IN3) || \ + ((INPUT) == SPDIFRX_INPUT_IN0)) + +#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ + ((RET) == SPDIFRX_MAXRETRIES_3) || \ + ((RET) == SPDIFRX_MAXRETRIES_15) || \ + ((RET) == SPDIFRX_MAXRETRIES_63)) + +#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ + ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) + +#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ + ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) + +#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ + ((VAL) == SPDIFRX_VALIDITYMASK_ON)) + +#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ + ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) + +#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ + ((CHANNEL) == SPDIFRX_CHANNEL_B)) + +#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ + ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ + ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) + +#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ + ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) + +#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ + ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) + +#define IS_SYMBOL_CLOCK_GEN(VAL) (((VAL) == ENABLE) || ((VAL) == DISABLE)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ +#endif /* SPDIFRX */ +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_SPDIFRX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi.h new file mode 100644 index 000000000..b0f0ab179 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi.h @@ -0,0 +1,1128 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SPI_H +#define STM32H7RSxx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of + @ref SPI_Slave_Select_Management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_Transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_Mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between + Min_Data = 0 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the SSOM bit in the SPIx_CR2 register + and it takes effect only if the SPI interface is configured + as Motorola SPI master (FRF=0). */ + + uint32_t NSSPolarity; /*!< Specifies which level of SS input/output external signal + (present on SS pin) is considered as active one. + This parameter can be a value of @ref SPI_NSS_Polarity */ + + uint32_t FifoThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref SPI_Fifo_Threshold */ + + uint32_t TxCRCInitializationPattern; /*!< Specifies the transmitter CRC initialization Pattern used for + the CRC calculation. This parameter can be a value of + @ref SPI_CRC_Calculation_Initialization_Pattern */ + + uint32_t RxCRCInitializationPattern; /*!< Specifies the receiver CRC initialization Pattern used for + the CRC calculation. This parameter can be a value of + @ref SPI_CRC_Calculation_Initialization_Pattern */ + + uint32_t MasterSSIdleness; /*!< Specifies an extra delay, expressed in number of SPI clock cycle + periods, inserted additionally between active edge of SS + and first data transaction start in master mode. + This parameter can be a value of @ref SPI_Master_SS_Idleness */ + + uint32_t MasterInterDataIdleness; /*!< Specifies minimum time delay (expressed in SPI clock cycles periods) + inserted between two consecutive data frames in master mode. + This parameter can be a value of + @ref SPI_Master_InterData_Idleness */ + + uint32_t MasterReceiverAutoSusp; /*!< Control continuous SPI transfer in master receiver mode + and automatic management in order to avoid overrun condition. + This parameter can be a value of @ref SPI_Master_RX_AutoSuspend*/ + + uint32_t MasterKeepIOState; /*!< Control of Alternate function GPIOs state + This parameter can be a value of @ref SPI_Master_Keep_IO_State */ + + uint32_t IOSwap; /*!< Invert MISO/MOSI alternate functions + This parameter can be a value of @ref SPI_IO_Swap */ + + uint32_t ReadyMasterManagement; /*!< Specifies if RDY Signal is managed internally or not. + This parameter can be a value of @ref SPI_RDY_Master_Management */ + + uint32_t ReadyPolarity; /*!< Specifies which level of RDY Signal input (present on RDY pin) + is considered as active one. + This parameter can be a value of @ref SPI_RDY_Polarity */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00UL, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01UL, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02UL, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03UL, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04UL, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05UL, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06UL, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07UL /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* SuspendCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Suspend callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00UL, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01UL, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02UL, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03UL, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04UL, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05UL, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06UL, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07UL, /*!< SPI Abort callback ID */ + HAL_SPI_SUSPEND_CB_ID = 0x08UL, /*!< SPI Suspend callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x09UL, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x0AUL /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_FIFO_Type SPI FIFO Type + * @{ + */ +#define SPI_LOWEND_FIFO_SIZE 8UL +#define SPI_HIGHEND_FIFO_SIZE 16UL +/** + * @} + */ + +/** @defgroup SPI_Error_Code SPI Error Codes + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000UL) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001UL) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002UL) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004UL) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008UL) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010UL) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020UL) /*!< Error on RXP/TXP/DXP/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040UL) /*!< Error during SPI Abort procedure */ +#define HAL_SPI_ERROR_UDR (0x00000080UL) /*!< Underrun error */ +#define HAL_SPI_ERROR_TIMEOUT (0x00000100UL) /*!< Timeout error */ +#define HAL_SPI_ERROR_UNKNOW (0x00000200UL) /*!< Unknown error */ +#define HAL_SPI_ERROR_NOT_SUPPORTED (0x00000400UL) /*!< Requested operation not supported */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00001000UL) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000UL) +#define SPI_MODE_MASTER SPI_CFG2_MASTER +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000UL) +#define SPI_DIRECTION_2LINES_TXONLY SPI_CFG2_COMM_0 +#define SPI_DIRECTION_2LINES_RXONLY SPI_CFG2_COMM_1 +#define SPI_DIRECTION_1LINE SPI_CFG2_COMM +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000003UL) +#define SPI_DATASIZE_5BIT (0x00000004UL) +#define SPI_DATASIZE_6BIT (0x00000005UL) +#define SPI_DATASIZE_7BIT (0x00000006UL) +#define SPI_DATASIZE_8BIT (0x00000007UL) +#define SPI_DATASIZE_9BIT (0x00000008UL) +#define SPI_DATASIZE_10BIT (0x00000009UL) +#define SPI_DATASIZE_11BIT (0x0000000AUL) +#define SPI_DATASIZE_12BIT (0x0000000BUL) +#define SPI_DATASIZE_13BIT (0x0000000CUL) +#define SPI_DATASIZE_14BIT (0x0000000DUL) +#define SPI_DATASIZE_15BIT (0x0000000EUL) +#define SPI_DATASIZE_16BIT (0x0000000FUL) +#define SPI_DATASIZE_17BIT (0x00000010UL) +#define SPI_DATASIZE_18BIT (0x00000011UL) +#define SPI_DATASIZE_19BIT (0x00000012UL) +#define SPI_DATASIZE_20BIT (0x00000013UL) +#define SPI_DATASIZE_21BIT (0x00000014UL) +#define SPI_DATASIZE_22BIT (0x00000015UL) +#define SPI_DATASIZE_23BIT (0x00000016UL) +#define SPI_DATASIZE_24BIT (0x00000017UL) +#define SPI_DATASIZE_25BIT (0x00000018UL) +#define SPI_DATASIZE_26BIT (0x00000019UL) +#define SPI_DATASIZE_27BIT (0x0000001AUL) +#define SPI_DATASIZE_28BIT (0x0000001BUL) +#define SPI_DATASIZE_29BIT (0x0000001CUL) +#define SPI_DATASIZE_30BIT (0x0000001DUL) +#define SPI_DATASIZE_31BIT (0x0000001EUL) +#define SPI_DATASIZE_32BIT (0x0000001FUL) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000UL) +#define SPI_POLARITY_HIGH SPI_CFG2_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000UL) +#define SPI_PHASE_2EDGE SPI_CFG2_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_Management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CFG2_SSM +#define SPI_NSS_HARD_INPUT (0x00000000UL) +#define SPI_NSS_HARD_OUTPUT SPI_CFG2_SSOE +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_DISABLE (0x00000000UL) +#define SPI_NSS_PULSE_ENABLE SPI_CFG2_SSOM +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_BYPASS (0x80000000UL) +#define SPI_BAUDRATEPRESCALER_2 (0x00000000UL) +#define SPI_BAUDRATEPRESCALER_4 (0x10000000UL) +#define SPI_BAUDRATEPRESCALER_8 (0x20000000UL) +#define SPI_BAUDRATEPRESCALER_16 (0x30000000UL) +#define SPI_BAUDRATEPRESCALER_32 (0x40000000UL) +#define SPI_BAUDRATEPRESCALER_64 (0x50000000UL) +#define SPI_BAUDRATEPRESCALER_128 (0x60000000UL) +#define SPI_BAUDRATEPRESCALER_256 (0x70000000UL) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_Transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000UL) +#define SPI_FIRSTBIT_LSB SPI_CFG2_LSBFRST +/** + * @} + */ + +/** @defgroup SPI_TI_Mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000UL) +#define SPI_TIMODE_ENABLE SPI_CFG2_SP_0 +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000UL) +#define SPI_CRCCALCULATION_ENABLE SPI_CFG1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000UL) +#define SPI_CRC_LENGTH_4BIT (0x00030000UL) +#define SPI_CRC_LENGTH_5BIT (0x00040000UL) +#define SPI_CRC_LENGTH_6BIT (0x00050000UL) +#define SPI_CRC_LENGTH_7BIT (0x00060000UL) +#define SPI_CRC_LENGTH_8BIT (0x00070000UL) +#define SPI_CRC_LENGTH_9BIT (0x00080000UL) +#define SPI_CRC_LENGTH_10BIT (0x00090000UL) +#define SPI_CRC_LENGTH_11BIT (0x000A0000UL) +#define SPI_CRC_LENGTH_12BIT (0x000B0000UL) +#define SPI_CRC_LENGTH_13BIT (0x000C0000UL) +#define SPI_CRC_LENGTH_14BIT (0x000D0000UL) +#define SPI_CRC_LENGTH_15BIT (0x000E0000UL) +#define SPI_CRC_LENGTH_16BIT (0x000F0000UL) +#define SPI_CRC_LENGTH_17BIT (0x00100000UL) +#define SPI_CRC_LENGTH_18BIT (0x00110000UL) +#define SPI_CRC_LENGTH_19BIT (0x00120000UL) +#define SPI_CRC_LENGTH_20BIT (0x00130000UL) +#define SPI_CRC_LENGTH_21BIT (0x00140000UL) +#define SPI_CRC_LENGTH_22BIT (0x00150000UL) +#define SPI_CRC_LENGTH_23BIT (0x00160000UL) +#define SPI_CRC_LENGTH_24BIT (0x00170000UL) +#define SPI_CRC_LENGTH_25BIT (0x00180000UL) +#define SPI_CRC_LENGTH_26BIT (0x00190000UL) +#define SPI_CRC_LENGTH_27BIT (0x001A0000UL) +#define SPI_CRC_LENGTH_28BIT (0x001B0000UL) +#define SPI_CRC_LENGTH_29BIT (0x001C0000UL) +#define SPI_CRC_LENGTH_30BIT (0x001D0000UL) +#define SPI_CRC_LENGTH_31BIT (0x001E0000UL) +#define SPI_CRC_LENGTH_32BIT (0x001F0000UL) +/** + * @} + */ + +/** @defgroup SPI_Fifo_Threshold SPI Fifo Threshold + * @{ + */ +#define SPI_FIFO_THRESHOLD_01DATA (0x00000000UL) +#define SPI_FIFO_THRESHOLD_02DATA (0x00000020UL) +#define SPI_FIFO_THRESHOLD_03DATA (0x00000040UL) +#define SPI_FIFO_THRESHOLD_04DATA (0x00000060UL) +#define SPI_FIFO_THRESHOLD_05DATA (0x00000080UL) +#define SPI_FIFO_THRESHOLD_06DATA (0x000000A0UL) +#define SPI_FIFO_THRESHOLD_07DATA (0x000000C0UL) +#define SPI_FIFO_THRESHOLD_08DATA (0x000000E0UL) +#define SPI_FIFO_THRESHOLD_09DATA (0x00000100UL) +#define SPI_FIFO_THRESHOLD_10DATA (0x00000120UL) +#define SPI_FIFO_THRESHOLD_11DATA (0x00000140UL) +#define SPI_FIFO_THRESHOLD_12DATA (0x00000160UL) +#define SPI_FIFO_THRESHOLD_13DATA (0x00000180UL) +#define SPI_FIFO_THRESHOLD_14DATA (0x000001A0UL) +#define SPI_FIFO_THRESHOLD_15DATA (0x000001C0UL) +#define SPI_FIFO_THRESHOLD_16DATA (0x000001E0UL) +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation_Initialization_Pattern SPI CRC Calculation Initialization Pattern + * @{ + */ +#define SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN (0x00000000UL) +#define SPI_CRC_INITIALIZATION_ALL_ONE_PATTERN (0x00000001UL) +/** + * @} + */ + +/** @defgroup SPI_NSS_Polarity SPI NSS Polarity + * @{ + */ +#define SPI_NSS_POLARITY_LOW (0x00000000UL) +#define SPI_NSS_POLARITY_HIGH SPI_CFG2_SSIOP +/** + * @} + */ + +/** @defgroup SPI_Master_Keep_IO_State Keep IO State + * @{ + */ +#define SPI_MASTER_KEEP_IO_STATE_DISABLE (0x00000000UL) +#define SPI_MASTER_KEEP_IO_STATE_ENABLE SPI_CFG2_AFCNTR +/** + * @} + */ + +/** @defgroup SPI_IO_Swap Control SPI IO Swap + * @{ + */ +#define SPI_IO_SWAP_DISABLE (0x00000000UL) +#define SPI_IO_SWAP_ENABLE SPI_CFG2_IOSWP +/** + * @} + */ + +/** @defgroup SPI_Master_SS_Idleness SPI Master SS Idleness + * @{ + */ +#define SPI_MASTER_SS_IDLENESS_00CYCLE (0x00000000UL) +#define SPI_MASTER_SS_IDLENESS_01CYCLE (0x00000001UL) +#define SPI_MASTER_SS_IDLENESS_02CYCLE (0x00000002UL) +#define SPI_MASTER_SS_IDLENESS_03CYCLE (0x00000003UL) +#define SPI_MASTER_SS_IDLENESS_04CYCLE (0x00000004UL) +#define SPI_MASTER_SS_IDLENESS_05CYCLE (0x00000005UL) +#define SPI_MASTER_SS_IDLENESS_06CYCLE (0x00000006UL) +#define SPI_MASTER_SS_IDLENESS_07CYCLE (0x00000007UL) +#define SPI_MASTER_SS_IDLENESS_08CYCLE (0x00000008UL) +#define SPI_MASTER_SS_IDLENESS_09CYCLE (0x00000009UL) +#define SPI_MASTER_SS_IDLENESS_10CYCLE (0x0000000AUL) +#define SPI_MASTER_SS_IDLENESS_11CYCLE (0x0000000BUL) +#define SPI_MASTER_SS_IDLENESS_12CYCLE (0x0000000CUL) +#define SPI_MASTER_SS_IDLENESS_13CYCLE (0x0000000DUL) +#define SPI_MASTER_SS_IDLENESS_14CYCLE (0x0000000EUL) +#define SPI_MASTER_SS_IDLENESS_15CYCLE (0x0000000FUL) +/** + * @} + */ + +/** @defgroup SPI_Master_InterData_Idleness SPI Master Inter-Data Idleness + * @{ + */ +#define SPI_MASTER_INTERDATA_IDLENESS_00CYCLE (0x00000000UL) +#define SPI_MASTER_INTERDATA_IDLENESS_01CYCLE (0x00000010UL) +#define SPI_MASTER_INTERDATA_IDLENESS_02CYCLE (0x00000020UL) +#define SPI_MASTER_INTERDATA_IDLENESS_03CYCLE (0x00000030UL) +#define SPI_MASTER_INTERDATA_IDLENESS_04CYCLE (0x00000040UL) +#define SPI_MASTER_INTERDATA_IDLENESS_05CYCLE (0x00000050UL) +#define SPI_MASTER_INTERDATA_IDLENESS_06CYCLE (0x00000060UL) +#define SPI_MASTER_INTERDATA_IDLENESS_07CYCLE (0x00000070UL) +#define SPI_MASTER_INTERDATA_IDLENESS_08CYCLE (0x00000080UL) +#define SPI_MASTER_INTERDATA_IDLENESS_09CYCLE (0x00000090UL) +#define SPI_MASTER_INTERDATA_IDLENESS_10CYCLE (0x000000A0UL) +#define SPI_MASTER_INTERDATA_IDLENESS_11CYCLE (0x000000B0UL) +#define SPI_MASTER_INTERDATA_IDLENESS_12CYCLE (0x000000C0UL) +#define SPI_MASTER_INTERDATA_IDLENESS_13CYCLE (0x000000D0UL) +#define SPI_MASTER_INTERDATA_IDLENESS_14CYCLE (0x000000E0UL) +#define SPI_MASTER_INTERDATA_IDLENESS_15CYCLE (0x000000F0UL) +/** + * @} + */ + +/** @defgroup SPI_Master_RX_AutoSuspend SPI Master Receiver AutoSuspend + * @{ + */ +#define SPI_MASTER_RX_AUTOSUSP_DISABLE (0x00000000UL) +#define SPI_MASTER_RX_AUTOSUSP_ENABLE SPI_CR1_MASRX +/** + * @} + */ + +/** @defgroup SPI_Underrun_Behaviour SPI Underrun Behavior + * @{ + */ +#define SPI_UNDERRUN_BEHAV_REGISTER_PATTERN (0x00000000UL) +#define SPI_UNDERRUN_BEHAV_LAST_RECEIVED SPI_CFG1_UDRCFG +/** + * @} + */ + +/** @defgroup SPI_RDY_Master_Management SPI RDY Signal Input Master Management + * @{ + */ +#define SPI_RDY_MASTER_MANAGEMENT_INTERNALLY (0x00000000UL) +#define SPI_RDY_MASTER_MANAGEMENT_EXTERNALLY SPI_CFG2_RDIOM +/** + * @} + */ + +/** @defgroup SPI_RDY_Polarity SPI RDY Signal Input/Output Polarity + * @{ + */ +#define SPI_RDY_POLARITY_HIGH (0x00000000UL) +#define SPI_RDY_POLARITY_LOW SPI_CFG2_RDIOP +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_RXP SPI_IER_RXPIE +#define SPI_IT_TXP SPI_IER_TXPIE +#define SPI_IT_DXP SPI_IER_DXPIE +#define SPI_IT_EOT SPI_IER_EOTIE +#define SPI_IT_TXTF SPI_IER_TXTFIE +#define SPI_IT_UDR SPI_IER_UDRIE +#define SPI_IT_OVR SPI_IER_OVRIE +#define SPI_IT_CRCERR SPI_IER_CRCEIE +#define SPI_IT_FRE SPI_IER_TIFREIE +#define SPI_IT_MODF SPI_IER_MODFIE +#define SPI_IT_ERR (SPI_IT_UDR | SPI_IT_OVR | SPI_IT_FRE | SPI_IT_MODF | SPI_IT_CRCERR) +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXP SPI_SR_RXP /* SPI status flag : Rx-Packet available flag */ +#define SPI_FLAG_TXP SPI_SR_TXP /* SPI status flag : Tx-Packet space available flag */ +#define SPI_FLAG_DXP SPI_SR_DXP /* SPI status flag : Duplex Packet flag */ +#define SPI_FLAG_EOT SPI_SR_EOT /* SPI status flag : End of transfer flag */ +#define SPI_FLAG_TXTF SPI_SR_TXTF /* SPI status flag : Transmission Transfer Filled flag */ +#define SPI_FLAG_UDR SPI_SR_UDR /* SPI Error flag : Underrun flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag : Overrun flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCE /* SPI Error flag : CRC error flag */ +#define SPI_FLAG_FRE SPI_SR_TIFRE /* SPI Error flag : TI mode frame format error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag : Mode fault flag */ +#define SPI_FLAG_SUSP SPI_SR_SUSP /* SPI status flag : Transfer suspend complete flag */ +#define SPI_FLAG_TXC SPI_SR_TXC /* SPI status flag : TxFIFO transmission complete flag */ +#define SPI_FLAG_FRLVL SPI_SR_RXPLVL /* SPI status flag : Fifo reception level flag */ +#define SPI_FLAG_RXWNE SPI_SR_RXWNE /* SPI status flag : RxFIFO word not empty flag */ +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_RX_FIFO_0PACKET (0x00000000UL) /* 0 or multiple of 4 packets available in the RxFIFO */ +#define SPI_RX_FIFO_1PACKET (SPI_SR_RXPLVL_0) +#define SPI_RX_FIFO_2PACKET (SPI_SR_RXPLVL_1) +#define SPI_RX_FIFO_3PACKET (SPI_SR_RXPLVL_1 | SPI_SR_RXPLVL_0) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPI_IT_RXP : Rx-Packet available interrupt + * @arg SPI_IT_TXP : Tx-Packet space available interrupt + * @arg SPI_IT_DXP : Duplex Packet interrupt + * @arg SPI_IT_EOT : End of transfer interrupt + * @arg SPI_IT_TXTF : Transmission Transfer Filled interrupt + * @arg SPI_IT_UDR : Underrun interrupt + * @arg SPI_IT_OVR : Overrun interrupt + * @arg SPI_IT_CRCERR : CRC error interrupt + * @arg SPI_IT_FRE : TI mode frame format error interrupt + * @arg SPI_IT_MODF : Mode fault interrupt + * @arg SPI_IT_ERR : Error interrupt + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPI_IT_RXP : Rx-Packet available interrupt + * @arg SPI_IT_TXP : Tx-Packet space available interrupt + * @arg SPI_IT_DXP : Duplex Packet interrupt + * @arg SPI_IT_EOT : End of transfer interrupt + * @arg SPI_IT_TXTF : Transmission Transfer Filled interrupt + * @arg SPI_IT_UDR : Underrun interrupt + * @arg SPI_IT_OVR : Overrun interrupt + * @arg SPI_IT_CRCERR : CRC error interrupt + * @arg SPI_IT_FRE : TI mode frame format error interrupt + * @arg SPI_IT_MODF : Mode fault interrupt + * @arg SPI_IT_ERR : Error interrupt + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. + * @param __INTERRUPT__: specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_RXP : Rx-Packet available interrupt + * @arg SPI_IT_TXP : Tx-Packet space available interrupt + * @arg SPI_IT_DXP : Duplex Packet interrupt + * @arg SPI_IT_EOT : End of transfer interrupt + * @arg SPI_IT_TXTF : Transmission Transfer Filled interrupt + * @arg SPI_IT_UDR : Underrun interrupt + * @arg SPI_IT_OVR : Overrun interrupt + * @arg SPI_IT_CRCERR : CRC error interrupt + * @arg SPI_IT_FRE : TI mode frame format error interrupt + * @arg SPI_IT_MODF : Mode fault interrupt + * @arg SPI_IT_ERR : Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, 3, 4, 5 or 6 to select the SPI peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXP : Rx-Packet available flag + * @arg SPI_FLAG_TXP : Tx-Packet space available flag + * @arg SPI_FLAG_DXP : Duplex Packet flag + * @arg SPI_FLAG_EOT : End of transfer flag + * @arg SPI_FLAG_TXTF : Transmission Transfer Filled flag + * @arg SPI_FLAG_UDR : Underrun flag + * @arg SPI_FLAG_OVR : Overrun flag + * @arg SPI_FLAG_CRCERR : CRC error flag + * @arg SPI_FLAG_FRE : TI mode frame format error flag + * @arg SPI_FLAG_MODF : Mode fault flag + * @arg SPI_FLAG_SUSP : Transfer suspend complete flag + * @arg SPI_FLAG_TXC : TxFIFO transmission complete flag + * @arg SPI_FLAG_FRLVL : Fifo reception level flag + * @arg SPI_FLAG_RXWNE : RxFIFO word not empty flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_CRCEC) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , (uint32_t)(SPI_IFCR_MODFC)); + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_OVRC) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TIFREC) + +/** @brief Clear the SPI UDR pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_UDRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_UDRC) + +/** @brief Clear the SPI EOT pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_EOTFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_EOTC) + +/** @brief Clear the SPI UDR pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_TXTFFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TXTFC) + +/** @brief Clear the SPI SUSP pending flag. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_CLEAR_SUSPFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_SUSPC) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1 , SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__: specifies the SPI Handle. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1 , SPI_CR1_SPE) +/** + * @} + */ + + +/* Include SPI HAL Extension module */ +#include "stm32h7rsxx_hal_spi_ex.h" + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); + +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); + + +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); + +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_SuspendCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(const SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode in 1Line configuration. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_HDDIR) + +/** @brief Set the SPI receive-only mode in 1Line configuration. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_HDDIR) + +/** @brief Set the SPI transmit-only mode in 2Lines configuration. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_2LINES_TX(__HANDLE__) MODIFY_REG((__HANDLE__)->Instance->CFG2, SPI_CFG2_COMM, SPI_CFG2_COMM_0) + +/** @brief Set the SPI receive-only mode in 2Lines configuration. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_2LINES_RX(__HANDLE__) MODIFY_REG((__HANDLE__)->Instance->CFG2, SPI_CFG2_COMM, SPI_CFG2_COMM_1) + +/** @brief Set the SPI Transmit-Receive mode in 2Lines configuration. + * @param __HANDLE__: specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_2LINES(__HANDLE__) MODIFY_REG((__HANDLE__)->Instance->CFG2, SPI_CFG2_COMM, 0x00000000UL) + +#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \ + ((MODE) == SPI_MODE_MASTER)) + +#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ + ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((MODE) == SPI_DIRECTION_1LINE) || \ + ((MODE) == SPI_DIRECTION_2LINES_TXONLY)) + +#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES) + +#define IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_TXONLY(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \ + ((MODE) == SPI_DIRECTION_1LINE) || \ + ((MODE) == SPI_DIRECTION_2LINES_TXONLY)) + +#define IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_RXONLY(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \ + ((MODE) == SPI_DIRECTION_1LINE) || \ + ((MODE) == SPI_DIRECTION_2LINES_RXONLY)) + +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_32BIT) || \ + ((DATASIZE) == SPI_DATASIZE_31BIT) || \ + ((DATASIZE) == SPI_DATASIZE_30BIT) || \ + ((DATASIZE) == SPI_DATASIZE_29BIT) || \ + ((DATASIZE) == SPI_DATASIZE_28BIT) || \ + ((DATASIZE) == SPI_DATASIZE_27BIT) || \ + ((DATASIZE) == SPI_DATASIZE_26BIT) || \ + ((DATASIZE) == SPI_DATASIZE_25BIT) || \ + ((DATASIZE) == SPI_DATASIZE_24BIT) || \ + ((DATASIZE) == SPI_DATASIZE_23BIT) || \ + ((DATASIZE) == SPI_DATASIZE_22BIT) || \ + ((DATASIZE) == SPI_DATASIZE_21BIT) || \ + ((DATASIZE) == SPI_DATASIZE_20BIT) || \ + ((DATASIZE) == SPI_DATASIZE_22BIT) || \ + ((DATASIZE) == SPI_DATASIZE_19BIT) || \ + ((DATASIZE) == SPI_DATASIZE_18BIT) || \ + ((DATASIZE) == SPI_DATASIZE_17BIT) || \ + ((DATASIZE) == SPI_DATASIZE_16BIT) || \ + ((DATASIZE) == SPI_DATASIZE_15BIT) || \ + ((DATASIZE) == SPI_DATASIZE_14BIT) || \ + ((DATASIZE) == SPI_DATASIZE_13BIT) || \ + ((DATASIZE) == SPI_DATASIZE_12BIT) || \ + ((DATASIZE) == SPI_DATASIZE_11BIT) || \ + ((DATASIZE) == SPI_DATASIZE_10BIT) || \ + ((DATASIZE) == SPI_DATASIZE_9BIT) || \ + ((DATASIZE) == SPI_DATASIZE_8BIT) || \ + ((DATASIZE) == SPI_DATASIZE_7BIT) || \ + ((DATASIZE) == SPI_DATASIZE_6BIT) || \ + ((DATASIZE) == SPI_DATASIZE_5BIT) || \ + ((DATASIZE) == SPI_DATASIZE_4BIT)) + +/** + * @brief DataSize for limited instance + */ +#define IS_SPI_LIMITED_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \ + ((DATASIZE) == SPI_DATASIZE_8BIT)) + +#define IS_SPI_FIFOTHRESHOLD(THRESHOLD) (((THRESHOLD) == SPI_FIFO_THRESHOLD_01DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_02DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_03DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_04DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_05DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_06DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_07DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_08DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_09DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_10DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_11DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_12DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_13DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_14DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_15DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_16DATA)) + +/** + * @brief FifoThreshold for limited instance + */ +#define IS_SPI_LIMITED_FIFOTHRESHOLD(THRESHOLD) (((THRESHOLD) == SPI_FIFO_THRESHOLD_01DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_02DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_03DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_04DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_05DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_06DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_07DATA) || \ + ((THRESHOLD) == SPI_FIFO_THRESHOLD_08DATA)) + +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \ + ((CPOL) == SPI_POLARITY_HIGH)) + +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \ + ((CPHA) == SPI_PHASE_2EDGE)) + +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \ + ((NSS) == SPI_NSS_HARD_INPUT) || \ + ((NSS) == SPI_NSS_HARD_OUTPUT)) + +#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLE) || \ + ((NSSP) == SPI_NSS_PULSE_DISABLE)) + +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_BYPASS) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \ + ((PRESCALER) == SPI_BAUDRATEPRESCALER_256)) + +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \ + ((BIT) == SPI_FIRSTBIT_LSB)) + +#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \ + ((MODE) == SPI_TIMODE_ENABLE)) + +#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \ + ((CALCULATION) == SPI_CRCCALCULATION_ENABLE)) + +#define IS_SPI_CRC_INITIALIZATION_PATTERN(PATTERN) (((PATTERN) == SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN) || \ + ((PATTERN) == SPI_CRC_INITIALIZATION_ALL_ONE_PATTERN)) + +#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) || \ + ((LENGTH) == SPI_CRC_LENGTH_32BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_31BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_30BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_29BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_28BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_27BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_26BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_25BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_24BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_23BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_22BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_21BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_20BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_19BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_18BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_17BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_16BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_15BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_14BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_13BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_12BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_11BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_10BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_9BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_7BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_6BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_5BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_4BIT)) + +/** + * @brief CRC Length for limited instance + */ +#define IS_SPI_LIMITED_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_8BIT) || \ + ((LENGTH) == SPI_CRC_LENGTH_16BIT)) + + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) > 0x0UL) + + + +#define IS_SPI_UNDERRUN_BEHAVIOUR(MODE) (((MODE) == SPI_UNDERRUN_BEHAV_REGISTER_PATTERN) || \ + ((MODE) == SPI_UNDERRUN_BEHAV_LAST_RECEIVED)) + +#define IS_SPI_RDY_MASTER_MANAGEMENT(MANAGEMENT) (((MANAGEMENT) == SPI_RDY_MASTER_MANAGEMENT_INTERNALLY) || \ + ((MANAGEMENT) == SPI_RDY_MASTER_MANAGEMENT_EXTERNALLY)) + +#define IS_SPI_RDY_POLARITY(POLARITY) (((POLARITY) == SPI_RDY_POLARITY_HIGH) || \ + ((POLARITY) == SPI_RDY_POLARITY_LOW)) + +#define IS_SPI_MASTER_RX_AUTOSUSP(MODE) (((MODE) == SPI_MASTER_RX_AUTOSUSP_DISABLE) || \ + ((MODE) == SPI_MASTER_RX_AUTOSUSP_ENABLE)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SPI_H */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi_ex.h new file mode 100644 index 000000000..b6e939f2e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_spi_ex.h @@ -0,0 +1,99 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SPI_EX_H +#define STM32H7RSxx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPIEx_Exported_Types SPIEx Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPIEx_Exported_Constants SPIEx Exported Constants + * @{ + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPIEx_Exported_Macros SPIEx Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPIEx_EnableLockConfiguration(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPIEx_ConfigureUnderrun(SPI_HandleTypeDef *hspi, uint32_t UnderrunDetection, + uint32_t UnderrunBehaviour); +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SPI_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sram.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sram.h new file mode 100644 index 000000000..2f05083ff --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_sram.h @@ -0,0 +1,230 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sram.h + * @author MCD Application Team + * @brief Header file of SRAM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_SRAM_H +#define STM32H7RSxx_HAL_SRAM_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_fmc.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +/** @addtogroup SRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Types SRAM Exported Types + * @{ + */ +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */ + HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */ + HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */ + HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */ + HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */ + +} HAL_SRAM_StateTypeDef; + +/** + * @brief SRAM handle Structure definition + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +typedef struct __SRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< SRAM locking object */ + + __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ + + DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp Init callback */ + void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */ + void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Error callback */ +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} SRAM_HandleTypeDef; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */ + HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */ + HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */ + HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */ +} HAL_SRAM_CallbackIDTypeDef; + +/** + * @brief HAL SRAM Callback pointer definition + */ +typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram); +typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Macros SRAM Exported Macros + * @{ + */ + +/** @brief Reset SRAM handle state + * @param __HANDLE__ SRAM handle + * @retval None + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); +void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/* SRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group3 Control functions + * @{ + */ + +/* SRAM Control functions ****************************************************/ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @{ + */ + +/* SRAM State functions ******************************************************/ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_SRAM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim.h new file mode 100644 index 000000000..fac2d330a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim.h @@ -0,0 +1,2552 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_TIM_H +#define STM32H7RSxx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF + Macro __HAL_TIM_CALC_PSC() can be used to calculate prescaler value */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF + (or 0xFFEF if dithering is activated)Macros __HAL_TIM_CALC_PERIOD(), + __HAL_TIM_CALC_PERIOD_DITHER(),__HAL_TIM_CALC_PERIOD_BY_DELAY(), + __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY()can be used to calculate Period value */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF + (or 0xFFEF if dithering is activated) + Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER() can be used to calculate + Pulse value */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF + (or 0xFFEF if dithering is activated) + Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER() can be used to calculate + Pulse value */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ + void (* EncoderIndexCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Index Callback */ + void (* DirectionChangeCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Direction Change Callback */ + void (* IndexErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Index Error Callback */ + void (* TransitionErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Transition Error Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ + , HAL_TIM_ENCODER_INDEX_CB_ID = 0x1CU /*!< TIM Encoder Index Callback ID */ + , HAL_TIM_DIRECTION_CHANGE_CB_ID = 0x1DU /*!< TIM Direction Change Callback ID */ + , HAL_TIM_INDEX_ERROR_CB_ID = 0x1EU /*!< TIM Index Error Callback ID */ + , HAL_TIM_TRANSITION_ERROR_CB_ID = 0x1FU /*!< TIM Transition Error Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_CCR5 0x00000012U +#define TIM_DMABASE_CCR6 0x00000013U +#define TIM_DMABASE_CCMR3 0x00000014U +#define TIM_DMABASE_DTR2 0x00000015U +#define TIM_DMABASE_ECR 0x00000016U +#define TIM_DMABASE_TISEL 0x00000017U +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +#define TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X2 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_1) /*!< Encoder mode: Clock plus direction, x2 mode */ +#define TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X1 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Encoder mode: Clock plus direction, x1 mode, TI2FP2 edge sensitivity is set by CC2P */ +#define TIM_ENCODERMODE_DIRECTIONALCLOCK_X2 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_2) /*!< Encoder mode: Directional Clock, x2 mode */ +#define TIM_ENCODERMODE_DIRECTIONALCLOCK_X1_TI12 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Encoder mode: Directional Clock, x1 mode, TI1FP1 and TI2FP2 edge sensitivity is set by CC1P and CC2P */ +#define TIM_ENCODERMODE_X1_TI1 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Quadrature encoder mode: x1 mode, counting on TI1FP1 edges only, edge sensitivity is set by CC1P */ +#define TIM_ENCODERMODE_X1_TI2 (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode: x1 mode, counting on TI2FP2 edges only, edge sensitivity is set by CC1P */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +#define TIM_IT_IDX TIM_DIER_IDXIE /*!< Index interrupt */ +#define TIM_IT_DIR TIM_DIER_DIRIE /*!< Direction change interrupt */ +#define TIM_IT_IERR TIM_DIER_IERRIE /*!< Index error interrupt */ +#define TIM_IT_TERR TIM_DIER_TERRIE /*!< Transition error interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +#define TIM_FLAG_IDX TIM_SR_IDXF /*!< Encoder index flag */ +#define TIM_FLAG_DIR TIM_SR_DIRF /*!< Direction change flag */ +#define TIM_FLAG_IERR TIM_SR_IERRF /*!< Index error flag */ +#define TIM_FLAG_TERR TIM_SR_TERRF /*!< Transition error flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_ITR4 TIM_TS_ITR4 /*!< External clock source mode 1 (ITR4) */ +#define TIM_CLOCKSOURCE_ITR5 TIM_TS_ITR5 /*!< External clock source mode 1 (ITR5) */ +#define TIM_CLOCKSOURCE_ITR6 TIM_TS_ITR6 /*!< External clock source mode 1 (ITR6) */ +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#define TIM_CLOCKSOURCE_ITR8 TIM_TS_ITR8 /*!< External clock source mode 1 (ITR8) */ +#define TIM_CLOCKSOURCE_ITR9 TIM_TS_ITR9 /*!< External clock source mode 1 (ITR9) */ +#define TIM_CLOCKSOURCE_ITR10 TIM_TS_ITR10 /*!< External clock source mode 1 (ITR10) */ +#define TIM_CLOCKSOURCE_ITR11 TIM_TS_ITR11 /*!< External clock source mode 1 (ITR11) */ +#define TIM_CLOCKSOURCE_ITR13 TIM_TS_ITR13 /*!< External clock source mode 1 (ITR13) */ +#define TIM_CLOCKSOURCE_ITR14 TIM_TS_ITR14 /*!< External clock source mode 1 (ITR14) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_ENCODER_CLK TIM_CR2_MMS_3 /*!< Encoder clock is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +#define TIM_SLAVEMODE_COMBINED_GATEDRESET (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_0) /*!< Combined gated + reset mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +#define TIM_OCMODE_PULSE_ON_COMPARE (TIM_CCMR2_OC3M_3 | TIM_CCMR2_OC3M_1) /*!< Pulse on compare (CH3&CH4 only) */ +#define TIM_OCMODE_DIRECTION_OUTPUT (TIM_CCMR2_OC3M_3 | TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_0) /*!< Direction output (CH3&CH4 only) */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_ITR4 (TIM_SMCR_TS_3) /*!< Internal Trigger 4 (ITR4) */ +#define TIM_TS_ITR5 (TIM_SMCR_TS_0 | TIM_SMCR_TS_3) /*!< Internal Trigger 5 (ITR5) */ +#define TIM_TS_ITR6 (TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 6 (ITR6) */ +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#define TIM_TS_ITR8 (TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 8 (ITR8) */ +#define TIM_TS_ITR9 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 9 (ITR9) */ +#define TIM_TS_ITR10 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 10 (ITR10) */ +#define TIM_TS_ITR11 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 11 (ITR11) */ +#define TIM_TS_ITR13 (TIM_SMCR_TS_0 | TIM_SMCR_TS_4) /*!< Internal Trigger 13 (ITR13) */ +#define TIM_TS_ITR14 (TIM_SMCR_TS_1 | TIM_SMCR_TS_4) /*!< Internal Trigger 14 (ITR14) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_19TRANSFERS 0x00001200U /*!< The transfer is done to 19 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_20TRANSFERS 0x00001300U /*!< The transfer is done to 20 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_21TRANSFERS 0x00001400U /*!< The transfer is done to 21 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_22TRANSFERS 0x00001500U /*!< The transfer is done to 22 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_23TRANSFERS 0x00001600U /*!< The transfer is done to 23 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_24TRANSFERS 0x00001700U /*!< The transfer is done to 24 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_25TRANSFERS 0x00001800U /*!< The transfer is done to 25 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_26TRANSFERS 0x00001900U /*!< The transfer is done to 26 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC_AXISRAM1 SBS_BKLOCKR_ARAM1ECC_BL /*!< Enables and locks the AXIRAM1 ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_ECC_AXISRAM3 SBS_BKLOCKR_ARAM3ECC_BL /*!< Enables and locks the AXIRAM3 ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_ECC_ITCM SBS_BKLOCKR_ITCMECC_BL /*!< Enables and locks the ITCM ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_ECC_DTCM SBS_BKLOCKR_DTCMECC_BL /*!< Enables and locks the DTCM ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_ECC_BACKUP_RAM SBS_BKLOCKR_BKRAMECC_BL /*!< Enables and locks the Backup RAM ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_ECC_FLASH SBS_BKLOCKR_FLASHECC_BL /*!< Enables and locks the FLASH ECC double error detection flag connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_PVD SBS_BKLOCKR_PVD_BL /*!< Enables and locks the PVD signal connection to TIM1/8/15/16/17/20 break inputs */ +#define TIM_BREAK_SYSTEM_LOCKUP SBS_BKLOCKR_CM7LCKUP_BL /*!< Enables and locks the Cortex-M7 lockup signal connection to TIM1/8/15/16/17/20 break inputs */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @arg TIM_IT_IDX: Index interrupt + * @arg TIM_IT_DIR: Direction change interrupt + * @arg TIM_IT_IERR: Index error interrupt + * @arg TIM_IT_TERR: Transition error interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @arg TIM_IT_IDX: Index interrupt + * @arg TIM_IT_DIR: Direction change interrupt + * @arg TIM_IT_IERR: Index error interrupt + * @arg TIM_IT_TERR: Transition error interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @arg TIM_FLAG_IDX: Index interrupt flag + * @arg TIM_FLAG_DIR: Direction change interrupt flag + * @arg TIM_FLAG_IERR: Index error interrupt flag + * @arg TIM_FLAG_TERR: Transition error interrupt flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @arg TIM_FLAG_IDX: Index interrupt flag + * @arg TIM_FLAG_DIR: Direction change interrupt flag + * @arg TIM_FLAG_IERR: Index error interrupt flag + * @arg TIM_FLAG_TERR: Transition error interrupt flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @arg TIM_IT_IDX: Index interrupt + * @arg TIM_IT_DIR: Direction change interrupt + * @arg TIM_IT_IERR: Index error interrupt + * @arg TIM_IT_TERR: Transition error interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @arg TIM_IT_IDX: Index interrupt + * @arg TIM_IT_DIR: Direction change interrupt + * @arg TIM_IT_IERR: Index error interrupt + * @arg TIM_IT_TERR: Transition error interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE | TIM_CCER_CC4NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL) || \ + ((__BASE__) == TIM_DMABASE_DTR2) || \ + ((__BASE__) == TIM_DMABASE_ECR)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \ + ((__CHANNEL__) != (TIM_CHANNEL_5)) && \ + ((__CHANNEL__) != (TIM_CHANNEL_6))) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12) || \ + ((__MODE__) == TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X2) || \ + ((__MODE__) == TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X1) || \ + ((__MODE__) == TIM_ENCODERMODE_DIRECTIONALCLOCK_X2) || \ + ((__MODE__) == TIM_ENCODERMODE_DIRECTIONALCLOCK_X1_TI12) || \ + ((__MODE__) == TIM_ENCODERMODE_X1_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_X1_TI2)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \ + (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \ + ((__PERIOD__) > 0U)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR13) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR14)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO_ENCODER_CLK)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_GATEDRESET)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2) || \ + ((__MODE__) == TIM_OCMODE_DIRECTION_OUTPUT) || \ + ((__MODE__) == TIM_OCMODE_PULSE_ON_COMPARE)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9)|| \ + ((__SELECTION__) == TIM_TS_ITR10)|| \ + ((__SELECTION__) == TIM_TS_ITR11)|| \ + ((__SELECTION__) == TIM_TS_ITR13)|| \ + ((__SELECTION__) == TIM_TS_ITR14)|| \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_19TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_20TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_21TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_22TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_23TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_24TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_25TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_26TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_AXISRAM1) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_AXISRAM3) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_ITCM) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_DTCM) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_BACKUP_RAM) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_ECC_FLASH) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32h7rsxx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); +HAL_StatusTypeDef TIM_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t src, uint32_t dst, + uint32_t length); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_TIM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim_ex.h new file mode 100644 index 000000000..d1a83e646 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_tim_ex.h @@ -0,0 +1,1124 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_TIM_EX_H +#define STM32H7RSxx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @brief TIM Encoder index configuration + */ +typedef struct +{ + uint32_t Polarity; /*!< TIM Encoder index polarity.This parameter can be a value of @ref TIMEx_Encoder_Index_Polarity */ + + uint32_t Prescaler; /*!< TIM Encoder index prescaler.This parameter can be a value of @ref TIMEx_Encoder_Index_Prescaler */ + + uint32_t Filter; /*!< TIM Encoder index filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Blanking; /*!< Specifies whether or not the encoder index event is conditioned by TI3 or TI4 input.This parameter can be a value of @ref TIMEx_Encoder_Index_Blanking */ + + FunctionalState FirstIndexEnable; /*!< Specifies whether or not the encoder first index is enabled.This parameter value can be ENABLE or DISABLE. */ + + uint32_t Position; /*!< Specifies in which AB input configuration the index event resets the counter.This parameter can be a value of @ref TIMEx_Encoder_Index_Position */ + + uint32_t Direction; /*!< Specifies in which counter direction the index event resets the counter.This parameter can be a value of @ref TIMEx_Encoder_Index_Direction */ + +} TIMEx_EncoderIndexConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000UL /*!< TIM1_ETR is not connected to I/O */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 (TIM_AF1_ETRSEL_2) /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#define TIM_TIM1_ETR_ADC2_AWD1 (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1) /*!< TIM1_ETR is connected to ADC2 AWD1 */ +#define TIM_TIM1_ETR_ADC2_AWD2 (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC2 AWD2 */ +#define TIM_TIM1_ETR_ADC2_AWD3 (TIM_AF1_ETRSEL_3) /*!< TIM1_ETR is connected to ADC2 AWD3 */ + +#define TIM_TIM2_ETR_GPIO 0x00000000UL /*!< TIM2_ETR is not connected to I/O */ +#define TIM_TIM2_ETR_DCMIPP_HSYNC (TIM_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to DCMIPP HSYNC */ +#define TIM_TIM2_ETR_LTDC_HSYNC (TIM_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to LTDC HSYNC */ +#define TIM_TIM2_ETR_SAI1_FSA (TIM_AF1_ETRSEL_2) /*!< TIM2_ETR is connected to SAI1 FS_A */ +#define TIM_TIM2_ETR_SAI1_FSB (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to SAI1 FS_B */ +#define TIM_TIM2_ETR_GFXTIM_TE (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to GFXTIM TE */ +#define TIM_TIM2_ETR_DCMIPP_VSYNC (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to DCMIPP VSYNC */ +#define TIM_TIM2_ETR_LTDC_VSYNC (TIM_AF1_ETRSEL_3) /*!< TIM2_ETR is connected to LTDC VSYNC */ +#define TIM_TIM2_ETR_TIM3_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to TIM3 ETR */ +#define TIM_TIM2_ETR_TIM4_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to TIM4 ETR */ +#define TIM_TIM2_ETR_TIM5_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_2) /*!< TIM2_ETR is connected to TIM5 ETR */ +#define TIM_TIM2_ETR_ETH_PPS (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to ETH PPS */ + +#define TIM_TIM3_ETR_GPIO 0x00000000UL /*!< TIM3_ETR is not connected to I/O */ +#define TIM_TIM3_ETR_DCMIPP_HSYNC (TIM_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to DCMIPP HSYNC */ +#define TIM_TIM3_ETR_LTDC_HSYNC (TIM_AF1_ETRSEL_1) /*!< TIM3_ETR is connected to LTDC HSYNC */ +#define TIM_TIM3_ETR_GFXTIM_TE (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1) /*!< TIM3_ETR is connected to GFXTIM TE */ +#define TIM_TIM3_ETR_DCMIPP_VSYNC (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to DCMIPP VSYNC */ +#define TIM_TIM3_ETR_LTDC_VSYNC (TIM_AF1_ETRSEL_3) /*!< TIM3_ETR is connected to LTDC VSYNC */ +#define TIM_TIM3_ETR_TIM2_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to TIM2 ETR */ +#define TIM_TIM3_ETR_TIM4_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to TIM4 ETR */ +#define TIM_TIM3_ETR_TIM5_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_2) /*!< TIM3_ETR is connected to TIM5 ETR */ +#define TIM_TIM3_ETR_ETH_PPS (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_0) /*!< TIM3_ETR is connected to ETH PPS */ + +#define TIM_TIM4_ETR_GPIO 0x00000000UL /*!< TIM4_ETR is not connected to I/O */ +#define TIM_TIM4_ETR_DCMIPP_HSYNC (TIM_AF1_ETRSEL_0) /*!< TIM4_ETR is connected to DCMIPP HSYNC */ +#define TIM_TIM4_ETR_LTDC_HSYNC (TIM_AF1_ETRSEL_1) /*!< TIM4_ETR is connected to LTDC HSYNC */ +#define TIM_TIM4_ETR_GFXTIM_TE (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1) /*!< TIM4_ETR is connected to GFXTIM TE */ +#define TIM_TIM4_ETR_DCMIPP_VSYNC (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM4_ETR is connected to DCMIPP VSYNC */ +#define TIM_TIM4_ETR_LTDC_VSYNC (TIM_AF1_ETRSEL_3) /*!< TIM4_ETR is connected to LTDC VSYNC */ +#define TIM_TIM4_ETR_TIM2_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_0) /*!< TIM4_ETR is connected to TIM2 ETR */ +#define TIM_TIM4_ETR_TIM3_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1) /*!< TIM4_ETR is connected to TIM3 ETR */ +#define TIM_TIM4_ETR_TIM5_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_2) /*!< TIM4_ETR is connected to TIM5 ETR */ + +#define TIM_TIM5_ETR_GPIO 0x00000000UL /*!< TIM5_ETR is not connected to I/O */ +#define TIM_TIM5_ETR_SAI2_FSA (TIM_AF1_ETRSEL_0) /*!< TIM5_ETR is connected to SAI2 FS_A */ +#define TIM_TIM5_ETR_SAI2_FSB (TIM_AF1_ETRSEL_1) /*!< TIM5_ETR is connected to SAI2 FS_B */ +#define TIM_TIM5_ETR_DCMIPP_HSYNC (TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM5_ETR is connected to DCMIPP HSYNC */ +#define TIM_TIM5_ETR_LTDC_HSYNC (TIM_AF1_ETRSEL_2) /*!< TIM5_ETR is connected to LTDC HSYNC */ +#define TIM_TIM5_ETR_GFXTIM_TE (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1) /*!< TIM5_ETR is connected to GFXTIM TE */ +#define TIM_TIM5_ETR_DCMIPP_VSYNC (TIM_AF1_ETRSEL_2 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM5_ETR is connected to DCMIPP VSYNC */ +#define TIM_TIM5_ETR_LTDC_VSYNC (TIM_AF1_ETRSEL_3) /*!< TIM4_ETR is connected to LTDC VSYNC */ +#define TIM_TIM5_ETR_TIM2_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_0) /*!< TIM5_ETR is connected to TIM2 ETR */ +#define TIM_TIM5_ETR_TIM3_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1) /*!< TIM5_ETR is connected to TIM3 ETR */ +#define TIM_TIM5_ETR_TIM4_ETR (TIM_AF1_ETRSEL_3 | TIM_AF1_ETRSEL_1 | TIM_AF1_ETRSEL_0) /*!< TIM5_ETR is connected to TIM4 ETR */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM2_TI1_GPIO 0x00000000UL /*!< TIM2_TI1 is connected to GPIO */ +#define TIM_TIM2_TI1_ETH_PPS TIM_TISEL_TI1SEL_0 /*!< TIM2 TI1 is connected to ETH1 PPS */ + +#define TIM_TIM3_TI1_GPIO 0x00000000UL /*!< TIM3_TI1 is connected to GPIO */ +#define TIM_TIM3_TI1_ETH_PPS TIM_TISEL_TI1SEL_0 /*!< TIM3 TI1 is connected to ETH1 PPS */ + +#define TIM_TIM9_TI1_GPIO 0x00000000UL /*!< TIM9_TI1 is connected to GPIO */ +#define TIM_TIM9_TI1_MCO1 (TIM_TISEL_TI1SEL_2) /*!< TIM9_TI1 is connected to MCO1 */ +#define TIM_TIM9_TI1_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /*!< TIM9_TI1 is connected to MCO2 */ + +#define TIM_TIM12_TI1_GPIO 0x00000000UL /*!< TIM12_TI1 is connected to GPIO */ +#define TIM_TIM12_TI1_SPDIF_FS (TIM_TISEL_TI1SEL_0) /*!< TIM12_TI1 is connected to SPDIFRX FS */ +#define TIM_TIM12_TI1_HSI_1024 (TIM_TISEL_TI1SEL_1) /*!< TIM12_TI1 is connected to HSI/1024 */ +#define TIM_TIM12_TI1_CSI_128 (TIM_TISEL_TI1SEL_1 | TIM_TISEL_TI1SEL_0) /*!< TIM12_TI1 is connected to CSI/128 */ +#define TIM_TIM12_TI1_MCO1 (TIM_TISEL_TI1SEL_2) /*!< TIM12_TI1 is connected to MCO1 */ +#define TIM_TIM12_TI1_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /*!< TIM12_TI1 is connected to MCO2 */ +#define TIM_TIM12_TI2_GPIO 0x00000000UL /*!< TIM12_TI2 is connected to GPIO */ + +#define TIM_TIM15_TI1_GPIO 0x00000000UL /*!< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 (TIM_TISEL_TI1SEL_0) /*!< TIM15_TI1 is connected to TIM2 CH1 GPIO */ +#define TIM_TIM15_TI1_TIM3_CH1 (TIM_TISEL_TI1SEL_1) /*!< TIM15_TI1 is connected to TIM3 CH1 GPIO */ +#define TIM_TIM15_TI1_TIM4_CH1 (TIM_TISEL_TI1SEL_1 | TIM_TISEL_TI1SEL_0) /*!< TIM15_TI1 is connected to TIM4 CH1 GPIO */ +#define TIM_TIM15_TI1_MCO1 (TIM_TISEL_TI1SEL_2) /*!< TIM15_TI1 is connected to MCO1 */ +#define TIM_TIM15_TI1_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /*!< TIM15_TI1 is connected to MCO2 */ +#define TIM_TIM15_TI2_GPIO 0x00000000UL /*!< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 (TIM_TISEL_TI2SEL_0) /*!< TIM15_TI2 is connected to TIM2 CH2 GPIO */ +#define TIM_TIM15_TI2_TIM3_CH2 (TIM_TISEL_TI2SEL_1) /*!< TIM15_TI2 is connected to TIM3 CH2 GPIO */ +#define TIM_TIM15_TI2_TIM4_CH2 (TIM_TISEL_TI2SEL_1 | TIM_TISEL_TI2SEL_0) /*!< TIM15_TI2 is connected to TIM4 CH2 GPIO */ + +#define TIM_TIM16_TI1_GPIO 0x00000000UL /*!< TIM16_TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_RTC_WKUP (TIM_TISEL_TI1SEL_1 | TIM_TISEL_TI1SEL_0) /*!< TIM16_TI1 is connected to RTC Wakeup */ + +#define TIM_TIM17_TI1_GPIO 0x00000000UL /*!< TIM17_TI1 is connected to GPIO */ +#define TIM_TIM17_TI1_SPDIF_FS (TIM_TISEL_TI1SEL_0) /*!< TIM17_TI1 is connected to SPDIFRX FS */ +/** + * @} + */ + +/** @defgroup TIMEx_SMS_Preload_Enable TIM Extended Bitfield SMS preload enabling + * @{ + */ +#define TIM_SMS_PRELOAD_SOURCE_UPDATE 0x00000000U /*!< Prelaod of SMS bitfield is disabled */ +#define TIM_SMS_PRELOAD_SOURCE_INDEX TIM_SMCR_SMSPS /*!< Preload of SMS bitfield is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Encoder_Index_Blanking TIM Extended Encoder index blanking + * @{ + */ +#define TIM_ENCODERINDEX_BLANKING_DISABLE 0x00000000U /*!< Encoder index blanking is disabled */ +#define TIM_ENCODERINDEX_BLANKING_TI3 TIM_ECR_IBLK_0 /*!< Encoder index blanking is enabled on TI3 */ +#define TIM_ENCODERINDEX_BLANKING_TI4 TIM_ECR_IBLK_1 /*!< Encoder index blanking is enabled on TI4 */ + +/** + * @} + */ + +/** @defgroup TIMEx_Encoder_Index_Position TIM Extended Encoder index position + * @{ + */ +#define TIM_ENCODERINDEX_POSITION_00 0x00000000U /*!< Encoder index position is AB=00 */ +#define TIM_ENCODERINDEX_POSITION_01 TIM_ECR_IPOS_0 /*!< Encoder index position is AB=01 */ +#define TIM_ENCODERINDEX_POSITION_10 TIM_ECR_IPOS_1 /*!< Encoder index position is AB=10 */ +#define TIM_ENCODERINDEX_POSITION_11 (TIM_ECR_IPOS_1 | TIM_ECR_IPOS_0) /*!< Encoder index position is AB=11 */ +#define TIM_ENCODERINDEX_POSITION_0 0x00000000U /*!< In directional clock mode or clock plus direction mode, index resets the counter when clock is 0 */ +#define TIM_ENCODERINDEX_POSITION_1 TIM_ECR_IPOS_0 /*!< In directional clock mode or clock plus direction mode, index resets the counter when clock is 1 */ +/** + * @} + */ + +/** @defgroup TIMEx_Encoder_Index_Direction TIM Extended Encoder index direction + * @{ + */ +#define TIM_ENCODERINDEX_DIRECTION_UP_DOWN 0x00000000U /*!< Index resets the counter whatever the direction */ +#define TIM_ENCODERINDEX_DIRECTION_UP TIM_ECR_IDIR_0 /*!< Index resets the counter when up-counting only */ +#define TIM_ENCODERINDEX_DIRECTION_DOWN TIM_ECR_IDIR_1 /*!< Index resets the counter when down-counting only */ +/** + * @} + */ + +/** @defgroup TIMEx_Encoder_Index_Polarity TIM Extended Encoder index polarity + * @{ + */ +#define TIM_ENCODERINDEX_POLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_ENCODERINDEX_POLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIMEx_Encoder_Index_Prescaler TIM Extended Encodder index prescaler + * @{ + */ +#define TIM_ENCODERINDEX_PRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_ENCODERINDEX_PRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_ENCODERINDEX_PRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_ENCODERINDEX_PRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __HAL_TIM_CALC_PSC(80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __HAL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + ((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((__TIMCLK__)/(__CNTCLK__) - 1U) : 0U + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __HAL_TIM_CALC_PERIOD(1000000, 0, 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __HAL_TIM_CALC_PERIOD(__TIMCLK__, __PSC__, __FREQ__) \ + (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? ((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U)) - 1U) : 0U + +/** + * @brief HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required + * output signal frequency. + * @note ex: @ref __HAL_TIM_CALC_PERIOD_DITHER(1000000, 0, 10000); + * @note This macro should be used only if dithering is already enabled + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65519) + */ +#define __HAL_TIM_CALC_PERIOD_DITHER(__TIMCLK__, __PSC__, __FREQ__) \ + (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? \ + (uint32_t)(((uint64_t)(__TIMCLK__)*16/((__FREQ__) * ((__PSC__) + 1U)) - 16U)) : 0U + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __HAL_TIM_CALC_PULSE(1000000, 0, 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __HAL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer + * output compare active/inactive delay. + * @note ex: @ref __HAL_TIM_CALC_PULSE_DITHER(1000000, 0, 10); + * @note This macro should be used only if dithering is already enabled + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65519) + */ +#define __HAL_TIM_CALC_PULSE_DITHER(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__) * 16U) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __HAL_TIM_CALC_PERIOD_BY_DELAY(1000000, 0, 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __HAL_TIM_CALC_PERIOD_BY_DELAY(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__HAL_TIM_CALC_PULSE((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __HAL_TIM_CALC_PULSE((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required + * pulse duration (when the timer operates in one pulse mode). + * @note ex: @ref __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY(1000000, 0, 10, 20); + * @note This macro should be used only if dithering is already enabled + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65519) + */ +#define __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__HAL_TIM_CALC_PULSE_DITHER((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __HAL_TIM_CALC_PULSE_DITHER((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC1_AWD1) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC1_AWD2) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC1_AWD3) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC2_AWD1) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC2_AWD2) || \ + ((TIM_REMAP) == TIM_TIM1_ETR_ADC2_AWD3))) || \ + (((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_DCMIPP_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_LTDC_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_SAI1_FSA) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_SAI1_FSB) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_GFXTIM_TE) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_DCMIPP_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_LTDC_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_TIM3_ETR) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_TIM4_ETR) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_TIM5_ETR) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_ETH_PPS))) || \ + (((INSTANCE) == TIM3) && (((TIM_REMAP) == TIM_TIM3_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_DCMIPP_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_LTDC_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_GFXTIM_TE) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_DCMIPP_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_LTDC_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_TIM2_ETR) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_TIM4_ETR) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_TIM5_ETR) || \ + ((TIM_REMAP) == TIM_TIM3_ETR_ETH_PPS))) || \ + (((INSTANCE) == TIM4) && (((TIM_REMAP) == TIM_TIM4_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_DCMIPP_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_LTDC_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_GFXTIM_TE) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_DCMIPP_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_LTDC_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_TIM2_ETR) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_TIM3_ETR) || \ + ((TIM_REMAP) == TIM_TIM4_ETR_TIM5_ETR))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_SAI2_FSA) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_SAI2_FSB) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_DCMIPP_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_LTDC_HSYNC) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_GFXTIM_TE) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_DCMIPP_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_LTDC_VSYNC) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_TIM2_ETR) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_TIM3_ETR) || \ + ((TIM_REMAP) == TIM_TIM5_ETR_TIM4_ETR)))) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) + +#define IS_TIM_TISEL_TIX_INSTANCE(INSTANCE, CHANNEL) \ + (IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) && ((CHANNEL) < TIM_CHANNEL_5)) + +#define IS_TIM_CLOCKSOURCE_INSTANCE(INSTANCE, __CLOCK__) \ + ((((INSTANCE) == TIM1) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11))) \ + || \ + (((INSTANCE) == TIM2) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR13) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR14))) \ + || \ + (((INSTANCE) == TIM3) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11))) \ + || \ + (((INSTANCE) == TIM4) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11))) \ + || \ + (((INSTANCE) == TIM5) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR13))) \ + || \ + (((INSTANCE) == TIM9) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11))) \ + || \ + (((INSTANCE) == TIM12) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR9) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11))) \ + || \ + (((INSTANCE) == TIM15) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR4) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR5) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR6) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR7) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR8) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR10) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR11)))) + +#define IS_TIM_TRIGGER_INSTANCE(INSTANCE, __SELECTION__) \ + ((((INSTANCE) == TIM1) && \ + (((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11))) \ + || \ + (((INSTANCE) == TIM2) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_ITR14))) \ + || \ + (((INSTANCE) == TIM3) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11))) \ + || \ + (((INSTANCE) == TIM4) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11))) \ + || \ + (((INSTANCE) == TIM5) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_ITR14))) \ + || \ + (((INSTANCE) == TIM9) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11))) \ + || \ + (((INSTANCE) == TIM12) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11))) \ + || \ + (((INSTANCE) == TIM15) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11)))) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_INSTANCE(INSTANCE, __SELECTION__) \ + ((((INSTANCE) == TIM1) && \ + (((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM2) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_ITR14) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM3) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM4) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM5) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_ITR14) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM9) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM12) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR9) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE))) \ + || \ + (((INSTANCE) == TIM15) && \ + (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR10) || \ + ((__SELECTION__) == TIM_TS_ITR11) || \ + ((__SELECTION__) == TIM_TS_NONE)))) + +#define IS_TIM_OC_CHANNEL_MODE(__MODE__, __CHANNEL__) \ + (IS_TIM_OC_MODE(__MODE__) \ + && ((((__MODE__) == TIM_OCMODE_DIRECTION_OUTPUT) || ((__MODE__) == TIM_OCMODE_PULSE_ON_COMPARE)) \ + ? (((__CHANNEL__) == TIM_CHANNEL_3) || ((__CHANNEL__) == TIM_CHANNEL_4)) : (1 == 1))) + +#define IS_TIM_PULSEONCOMPARE_CHANNEL(__CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4)) + +#define IS_TIM_PULSEONCOMPARE_INSTANCE(INSTANCE) IS_TIM_CC3_INSTANCE(INSTANCE) + +#define IS_TIM_PULSEONCOMPARE_WIDTH(__WIDTH__) ((__WIDTH__) <= 0xFFU) + +#define IS_TIM_PULSEONCOMPARE_WIDTHPRESCALER(__PRESCALER__) ((__PRESCALER__) <= 0x7U) + +#define IS_TIM_SLAVE_PRELOAD_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_SMS_PRELOAD_SOURCE_UPDATE) \ + || ((__SOURCE__) == TIM_SMS_PRELOAD_SOURCE_INDEX)) + +#define IS_TIM_ENCODERINDEX_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINDEX_POLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_ENCODERINDEX_POLARITY_NONINVERTED)) + +#define IS_TIM_ENCODERINDEX_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ENCODERINDEX_PRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_ENCODERINDEX_PRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_ENCODERINDEX_PRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_ENCODERINDEX_PRESCALER_DIV8)) + +#define IS_TIM_ENCODERINDEX_FILTER(__FILTER__) ((__FILTER__) <= 0xFUL) + +#define IS_TIM_ENCODERINDEX_POSITION(__POSITION__) (((__POSITION__) == TIM_ENCODERINDEX_POSITION_00) || \ + ((__POSITION__) == TIM_ENCODERINDEX_POSITION_01) || \ + ((__POSITION__) == TIM_ENCODERINDEX_POSITION_10) || \ + ((__POSITION__) == TIM_ENCODERINDEX_POSITION_11) || \ + ((__POSITION__) == TIM_ENCODERINDEX_POSITION_0) || \ + ((__POSITION__) == TIM_ENCODERINDEX_POSITION_1)) + +#define IS_TIM_ENCODERINDEX_DIRECTION(__DIRECTION__) (((__DIRECTION__) == TIM_ENCODERINDEX_DIRECTION_UP_DOWN) || \ + ((__DIRECTION__) == TIM_ENCODERINDEX_DIRECTION_UP) || \ + ((__DIRECTION__) == TIM_ENCODERINDEX_DIRECTION_DOWN)) + +#define IS_TIM_ENCODERINDEX_BLANKING(__BLANKING__) (((__BLANKING__) == TIM_ENCODERINDEX_BLANKING_DISABLE) || \ + ((__BLANKING__) == TIM_ENCODERINDEX_BLANKING_TI3) || \ + ((__BLANKING__) == TIM_ENCODERINDEX_BLANKING_TI4)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_DitheringEnable(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DitheringDisable(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_OC_ConfigPulseOnCompare(TIM_HandleTypeDef *htim, uint32_t PulseWidthPrescaler, + uint32_t PulseWidth); +HAL_StatusTypeDef HAL_TIMEx_ConfigSlaveModePreload(TIM_HandleTypeDef *htim, uint32_t Source); +HAL_StatusTypeDef HAL_TIMEx_EnableSlaveModePreload(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DisableSlaveModePreload(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_EnableDeadTimePreload(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DisableDeadTimePreload(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_ConfigDeadTime(TIM_HandleTypeDef *htim, uint32_t Deadtime); +HAL_StatusTypeDef HAL_TIMEx_ConfigAsymmetricalDeadTime(TIM_HandleTypeDef *htim, uint32_t FallingDeadtime); +HAL_StatusTypeDef HAL_TIMEx_EnableAsymmetricalDeadTime(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DisableAsymmetricalDeadTime(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_ConfigEncoderIndex(TIM_HandleTypeDef *htim, + TIMEx_EncoderIndexConfigTypeDef *sEncoderIndexConfig); +HAL_StatusTypeDef HAL_TIMEx_EnableEncoderIndex(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DisableEncoderIndex(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_EnableEncoderFirstIndex(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_DisableEncoderFirstIndex(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_EncoderIndexCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_DirectionChangeCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_IndexErrorCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_TransitionErrorCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7RSxx_HAL_TIM_EX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart.h new file mode 100644 index 000000000..40e5329c4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart.h @@ -0,0 +1,1780 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_UART_H +#define STM32H7RSxx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + +#if defined(HAL_DMA_MODULE_ENABLED) + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + UART_CLOCKSOURCE_PCLK4 = 0x02U, /*!< PCLK4 clock source (only used by LPUART1) */ + UART_CLOCKSOURCE_PLL2Q = 0x04U, /*!< PLL2Q clock source */ + UART_CLOCKSOURCE_PLL3Q = 0x08U, /*!< PLL3Q clock source */ + UART_CLOCKSOURCE_HSI = 0x10U, /*!< HSI clock source */ + UART_CLOCKSOURCE_CSI = 0x20U, /*!< CSI clock source */ + UART_CLOCKSOURCE_LSE = 0x40U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x80U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +#if defined(HAL_DMA_MODULE_ENABLED) +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +#if defined(HAL_DMA_MODULE_ENABLED) +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on H7RS (i.e. 125 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 15625001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) +#else +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32h7rsxx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_UART_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart_ex.h new file mode 100644 index 000000000..a591a953e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_uart_ex.h @@ -0,0 +1,409 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_UART_EX_H +#define STM32H7RSxx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if(((__HANDLE__)->Instance == USART2) || \ + ((__HANDLE__)->Instance == USART3) || \ + ((__HANDLE__)->Instance == UART4) || \ + ((__HANDLE__)->Instance == UART5) || \ + ((__HANDLE__)->Instance == UART7) || \ + ((__HANDLE__)->Instance == UART8)) \ + { \ + switch(__HAL_RCC_GET_USART234578_SOURCE()) \ + { \ + case RCC_USART234578CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART234578CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART234578CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART234578CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK4: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK4; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_UART_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart.h new file mode 100644 index 000000000..60e9a5728 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart.h @@ -0,0 +1,986 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_usart.h + * @author MCD Application Team + * @brief Header file of USART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_USART_H +#define STM32H7RSxx_HAL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + Baud Rate Register[15:4] = ((2 * fclk_pres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * fclk_pres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where fclk_pres is the USART input clock frequency (fclk) + divided by a prescaler. + @note Oversampling by 8 is systematically applied to + achieve high baud rates. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode. */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity. */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase. */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref USART_ClockPrescaler. */ +} USART_InitTypeDef; + +/** + * @brief HAL USART State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04U /*!< Error */ +} HAL_USART_StateTypeDef; + +/** + * @brief USART clock sources definitions + */ +typedef enum +{ + USART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + USART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + USART_CLOCKSOURCE_PLL2Q = 0x02U, /*!< PLL2Q clock source */ + USART_CLOCKSOURCE_PLL3Q = 0x04U, /*!< PLL3Q clock source */ + USART_CLOCKSOURCE_HSI = 0x08U, /*!< HSI clock source */ + USART_CLOCKSOURCE_CSI = 0x10U, /*!< CSI clock source */ + USART_CLOCKSOURCE_LSE = 0x20U, /*!< LSE clock source */ + USART_CLOCKSOURCE_UNDEFINED = 0x80U /*!< Undefined clock source */ +} USART_ClockSourceTypeDef; + +/** + * @brief USART handle Structure definition + */ +typedef struct __USART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< USART communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< USART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< USART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ + + uint16_t Mask; /*!< USART Rx RDR register mask */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t SlaveMode; /*!< Enable/Disable UART SPI Slave Mode. This parameter can be a value + of @ref USARTEx_Slave_Mode */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value + of @ref USARTEx_FIFO_mode. */ + + void (*RxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_USART_StateTypeDef State; /*!< USART communication state */ + + __IO uint32_t ErrorCode; /*!< USART Error code */ + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */ + void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */ + void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */ + void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */ + void (* RxFifoFullCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */ + void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} USART_HandleTypeDef; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL USART Callback ID enumeration definition + */ +typedef enum +{ + HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */ + HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */ + HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */ + HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */ + HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */ + HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */ + HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */ + HAL_USART_RX_FIFO_FULL_CB_ID = 0x07U, /*!< USART Rx Fifo Full Callback ID */ + HAL_USART_TX_FIFO_EMPTY_CB_ID = 0x08U, /*!< USART Tx Fifo Empty Callback ID */ + + HAL_USART_MSPINIT_CB_ID = 0x09U, /*!< USART MspInit callback ID */ + HAL_USART_MSPDEINIT_CB_ID = 0x0AU /*!< USART MspDeInit callback ID */ + +} HAL_USART_CallbackIDTypeDef; + +/** + * @brief HAL USART Callback pointer definition + */ +typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */ + +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_Error_Definition USART Error Definition + * @{ + */ +#define HAL_USART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_USART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_USART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_USART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_USART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_USART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_USART_ERROR_UDR (0x00000020U) /*!< SPI slave underrun error */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define HAL_USART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +#define HAL_USART_ERROR_RTO (0x00000080U) /*!< Receiver Timeout error */ +/** + * @} + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< USART frame with 0.5 stop bit */ +#define USART_STOPBITS_1 0x00000000U /*!< USART frame with 1 stop bit */ +#define USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< USART frame with 1.5 stop bits */ +#define USART_STOPBITS_2 USART_CR2_STOP_1 /*!< USART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE 0x00000000U /*!< No parity */ +#define USART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define USART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define USART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLE 0x00000000U /*!< USART clock disable */ +#define USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< USART clock enable */ +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW 0x00000000U /*!< Driver enable signal is active high */ +#define USART_POLARITY_HIGH USART_CR2_CPOL /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE 0x00000000U /*!< USART frame phase on first clock transition */ +#define USART_PHASE_2EDGE USART_CR2_CPHA /*!< USART frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE 0x00000000U /*!< USART frame last data bit clock pulse not output to SCLK pin */ +#define USART_LASTBIT_ENABLE USART_CR2_LBCL /*!< USART frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_ClockPrescaler USART Clock Prescaler + * @{ + */ +#define USART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define USART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define USART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define USART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define USART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define USART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define USART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define USART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define USART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define USART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define USART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define USART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ + +/** + * @} + */ + +/** @defgroup USART_Request_Parameters USART Request Parameters + * @{ + */ +#define USART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define USART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define USART_FLAG_TXFT USART_ISR_TXFT /*!< USART TXFIFO threshold flag */ +#define USART_FLAG_RXFT USART_ISR_RXFT /*!< USART RXFIFO threshold flag */ +#define USART_FLAG_RXFF USART_ISR_RXFF /*!< USART RXFIFO Full flag */ +#define USART_FLAG_TXFE USART_ISR_TXFE /*!< USART TXFIFO Empty flag */ +#define USART_FLAG_REACK USART_ISR_REACK /*!< USART receive enable acknowledge flag */ +#define USART_FLAG_TEACK USART_ISR_TEACK /*!< USART transmit enable acknowledge flag */ +#define USART_FLAG_BUSY USART_ISR_BUSY /*!< USART busy flag */ +#define USART_FLAG_UDR USART_ISR_UDR /*!< SPI slave underrun error flag */ +#define USART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< USART transmit data register empty */ +#define USART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< USART TXFIFO not full */ +#define USART_FLAG_RTOF USART_ISR_RTOF /*!< USART receiver timeout flag */ +#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */ +#define USART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< USART read data register not empty */ +#define USART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< USART RXFIFO not empty */ +#define USART_FLAG_IDLE USART_ISR_IDLE /*!< USART idle flag */ +#define USART_FLAG_ORE USART_ISR_ORE /*!< USART overrun error */ +#define USART_FLAG_NE USART_ISR_NE /*!< USART noise error */ +#define USART_FLAG_FE USART_ISR_FE /*!< USART frame error */ +#define USART_FLAG_PE USART_ISR_PE /*!< USART parity error */ +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define USART_IT_PE 0x0028U /*!< USART parity error interruption */ +#define USART_IT_TXE 0x0727U /*!< USART transmit data register empty interruption */ +#define USART_IT_TXFNF 0x0727U /*!< USART TX FIFO not full interruption */ +#define USART_IT_TC 0x0626U /*!< USART transmission complete interruption */ +#define USART_IT_RXNE 0x0525U /*!< USART read data register not empty interruption */ +#define USART_IT_RXFNE 0x0525U /*!< USART RXFIFO not empty interruption */ +#define USART_IT_IDLE 0x0424U /*!< USART idle interruption */ +#define USART_IT_ERR 0x0060U /*!< USART error interruption */ +#define USART_IT_ORE 0x0300U /*!< USART overrun error interruption */ +#define USART_IT_NE 0x0200U /*!< USART noise error interruption */ +#define USART_IT_FE 0x0100U /*!< USART frame error interruption */ +#define USART_IT_RXFF 0x183FU /*!< USART RXFIFO full interruption */ +#define USART_IT_TXFE 0x173EU /*!< USART TXFIFO empty interruption */ +#define USART_IT_RXFT 0x1A7CU /*!< USART RXFIFO threshold reached interruption */ +#define USART_IT_TXFT 0x1B77U /*!< USART TXFIFO threshold reached interruption */ + +/** + * @} + */ + +/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags + * @{ + */ +#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define USART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define USART_CLEAR_UDRF USART_ICR_UDRCF /*!< SPI slave underrun error Clear Flag */ +#define USART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO Empty Clear Flag */ +#define USART_CLEAR_RTOF USART_ICR_RTOCF /*!< USART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup USART_Interruption_Mask USART Interruption Flags Mask + * @{ + */ +#define USART_IT_MASK 0x001FU /*!< USART interruptions flags mask */ +#define USART_CR_MASK 0x00E0U /*!< USART control register mask */ +#define USART_CR_POS 5U /*!< USART control register position */ +#define USART_ISR_MASK 0x1F00U /*!< USART ISR register mask */ +#define USART_ISR_POS 8U /*!< USART ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + +/** @brief Reset USART handle state. + * @param __HANDLE__ USART handle. + * @retval None + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_USART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** @brief Check whether the specified USART flag is set or not. + * @param __HANDLE__ specifies the USART Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref USART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref USART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref USART_FLAG_RXFF RXFIFO Full flag + * @arg @ref USART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref USART_FLAG_BUSY Busy flag + * @arg @ref USART_FLAG_UDR SPI slave underrun error flag + * @arg @ref USART_FLAG_TXE Transmit data register empty flag + * @arg @ref USART_FLAG_TXFNF TXFIFO not full flag + * @arg @ref USART_FLAG_TC Transmission Complete flag + * @arg @ref USART_FLAG_RXNE Receive data register not empty flag + * @arg @ref USART_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref USART_FLAG_RTOF Receiver Timeout flag + * @arg @ref USART_FLAG_IDLE Idle Line detection flag + * @arg @ref USART_FLAG_ORE OverRun Error flag + * @arg @ref USART_FLAG_NE Noise Error flag + * @arg @ref USART_FLAG_FE Framing Error flag + * @arg @ref USART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified USART pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref USART_CLEAR_UDRF SPI slave underrun error Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the USART PE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF) + +/** @brief Clear the USART FE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF) + +/** @brief Clear the USART NE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF) + +/** @brief Clear the USART ORE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF) + +/** @brief Clear the USART IDLE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF) + +/** @brief Clear the USART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_TXFECF(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_TXFECF) + +/** @brief Clear SPI slave underrun error flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_UDRFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_UDRF) + +/** @brief Enable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Disable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Check whether the specified USART interrupt has occurred or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>>\ + USART_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified USART interrupt source is enabled or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (0x01U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + USART_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific USART request flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __REQ__ specifies the request flag to set. + * This parameter can be one of the following values: + * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * + * @retval None + */ +#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup USART_Private_Macros USART Private Macros + * @{ + */ + +/** @brief Get USART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval USART clock division factor + */ +#define USART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ USART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval Division result + */ +#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__)\ + (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\ + + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Report the USART clock source. + * @param __HANDLE__ specifies the USART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the USART clocking source, written in __CLOCKSOURCE__. + */ +#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if(((__HANDLE__)->Instance == USART2) || \ + ((__HANDLE__)->Instance == USART3)) \ + { \ + switch(__HAL_RCC_GET_USART234578_SOURCE()) \ + { \ + case RCC_USART234578CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL2Q: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PLL2Q; \ + break; \ + case RCC_USART234578CLKSOURCE_PLL3Q: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PLL3Q; \ + break; \ + case RCC_USART234578CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART234578CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART234578CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + + +/** @brief Check USART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on H7RS (i.e. 100 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) */ +#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 12500000U) + +/** + * @brief Ensure that USART frame number of stop bits is valid. + * @param __STOPBITS__ USART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \ + ((__STOPBITS__) == USART_STOPBITS_1) || \ + ((__STOPBITS__) == USART_STOPBITS_1_5) || \ + ((__STOPBITS__) == USART_STOPBITS_2)) + +/** + * @brief Ensure that USART frame parity is valid. + * @param __PARITY__ USART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \ + ((__PARITY__) == USART_PARITY_EVEN) || \ + ((__PARITY__) == USART_PARITY_ODD)) + +/** + * @brief Ensure that USART communication mode is valid. + * @param __MODE__ USART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that USART clock state is valid. + * @param __CLOCK__ USART clock state. + * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid) + */ +#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \ + ((__CLOCK__) == USART_CLOCK_ENABLE)) + +/** + * @brief Ensure that USART frame polarity is valid. + * @param __CPOL__ USART frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH)) + +/** + * @brief Ensure that USART frame phase is valid. + * @param __CPHA__ USART frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE)) + +/** + * @brief Ensure that USART frame last bit clock pulse setting is valid. + * @param __LASTBIT__ USART frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == USART_LASTBIT_ENABLE)) + +/** + * @brief Ensure that USART request parameter is valid. + * @param __PARAM__ USART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that USART Prescaler is valid. + * @param __CLOCKPRESCALER__ USART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_USART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include USART HAL Extended module */ +#include "stm32h7rsxx_hal_usart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart); + +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); +void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(const USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(const USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_USART_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart_ex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart_ex.h new file mode 100644 index 000000000..3aa040468 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_usart_ex.h @@ -0,0 +1,282 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_usart_ex.h + * @author MCD Application Team + * @brief Header file of USART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_USART_EX_H +#define STM32H7RSxx_HAL_USART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup USARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants + * @{ + */ + +/** @defgroup USARTEx_Word_Length USARTEx Word Length + * @{ + */ +#define USART_WORDLENGTH_7B (USART_CR1_M1) /*!< 7-bit long USART frame */ +#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */ +#define USART_WORDLENGTH_9B (USART_CR1_M0) /*!< 9-bit long USART frame */ +/** + * @} + */ + +/** @defgroup USARTEx_Slave_Select_management USARTEx Slave Select Management + * @{ + */ +#define USART_NSS_HARD 0x00000000U /*!< SPI slave selection depends on NSS input pin */ +#define USART_NSS_SOFT USART_CR2_DIS_NSS /*!< SPI slave is always selected and NSS input pin is ignored */ +/** + * @} + */ + + +/** @defgroup USARTEx_Slave_Mode USARTEx Synchronous Slave mode enable + * @brief USART SLAVE mode + * @{ + */ +#define USART_SLAVEMODE_DISABLE 0x00000000U /*!< USART SPI Slave Mode Enable */ +#define USART_SLAVEMODE_ENABLE USART_CR2_SLVEN /*!< USART SPI Slave Mode Disable */ +/** + * @} + */ + +/** @defgroup USARTEx_FIFO_mode USARTEx FIFO mode + * @brief USART FIFO mode + * @{ + */ +#define USART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define USART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup USARTEx_TXFIFO_threshold_level USARTEx TXFIFO threshold level + * @brief USART TXFIFO level + * @{ + */ +#define USART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define USART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup USARTEx_RXFIFO_threshold_level USARTEx RXFIFO threshold level + * @brief USART RXFIFO level + * @{ + */ +#define USART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define USART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Macros USARTEx Private Macros + * @{ + */ + +/** @brief Compute the USART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the USART Handle. + * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define USART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that USART frame length is valid. + * @param __LENGTH__ USART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \ + ((__LENGTH__) == USART_WORDLENGTH_8B) || \ + ((__LENGTH__) == USART_WORDLENGTH_9B)) + +/** + * @brief Ensure that USART Negative Slave Select (NSS) pin management is valid. + * @param __NSS__ USART Negative Slave Select pin management. + * @retval SET (__NSS__ is valid) or RESET (__NSS__ is invalid) + */ +#define IS_USART_NSS(__NSS__) (((__NSS__) == USART_NSS_HARD) || \ + ((__NSS__) == USART_NSS_SOFT)) + +/** + * @brief Ensure that USART Slave Mode is valid. + * @param __STATE__ USART Slave Mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_SLAVEMODE(__STATE__) (((__STATE__) == USART_SLAVEMODE_DISABLE ) || \ + ((__STATE__) == USART_SLAVEMODE_ENABLE)) + +/** + * @brief Ensure that USART FIFO mode is valid. + * @param __STATE__ USART FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_FIFO_MODE_STATE(__STATE__) (((__STATE__) == USART_FIFOMODE_DISABLE ) || \ + ((__STATE__) == USART_FIFOMODE_ENABLE)) + +/** + * @brief Ensure that USART TXFIFO threshold level is valid. + * @param __THRESHOLD__ USART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that USART RXFIFO threshold level is valid. + * @param __THRESHOLD__ USART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_8_8)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup USARTEx_Exported_Functions_Group1 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart); +void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USARTEx_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig); +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_USART_EX_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_wwdg.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_wwdg.h new file mode 100644 index 000000000..d34863059 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_wwdg.h @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_WWDG_H +#define STM32H7RSxx_HAL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Types WWDG Exported Types + * @{ + */ + +/** + * @brief WWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG. + This parameter can be a value of @ref WWDG_Prescaler */ + + uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter. + This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. + This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not. + This parameter can be a value of @ref WWDG_EWI_Mode */ + +} WWDG_InitTypeDef; + +/** + * @brief WWDG handle Structure definition + */ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +typedef struct __WWDG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +{ + WWDG_TypeDef *Instance; /*!< Register base address */ + + WWDG_InitTypeDef Init; /*!< WWDG required parameters */ + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */ + + void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */ +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +} WWDG_HandleTypeDef; + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL WWDG common Callback ID enumeration definition + */ +typedef enum +{ + HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */ + HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */ +} HAL_WWDG_CallbackIDTypeDef; + +/** + * @brief HAL WWDG Callback pointer definition + */ +typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */ + +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition + * @{ + */ +#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */ +/** + * @} + */ + +/** @defgroup WWDG_Flag_definition WWDG Flag definition + * @brief WWDG Flag definition + * @{ + */ +#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */ +/** + * @} + */ + +/** @defgroup WWDG_Prescaler WWDG Prescaler + * @{ + */ +#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define WWDG_PRESCALER_128 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode + * @{ + */ +#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */ +#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Macros WWDG Private Macros + * @{ + */ +#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \ + ((__PRESCALER__) == WWDG_PRESCALER_2) || \ + ((__PRESCALER__) == WWDG_PRESCALER_4) || \ + ((__PRESCALER__) == WWDG_PRESCALER_8) || \ + ((__PRESCALER__) == WWDG_PRESCALER_16) || \ + ((__PRESCALER__) == WWDG_PRESCALER_32) || \ + ((__PRESCALER__) == WWDG_PRESCALER_64) || \ + ((__PRESCALER__) == WWDG_PRESCALER_128)) + +#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W)) + +#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T)) + +#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \ + ((__MODE__) == WWDG_EWI_DISABLE)) +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Macros WWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the WWDG peripheral. + * @param __HANDLE__ WWDG handle + * @retval None + */ +#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA) + +/** + * @brief Enable the WWDG early wakeup interrupt. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the interrupt to enable. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early wakeup interrupt + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @retval None + */ +#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__)) + +/** + * @brief Check whether the selected WWDG interrupt has occurred or not. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the it to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__)) + +/** @brief Clear the WWDG interrupt pending bits. + * bits to clear the selected interrupt pending bits. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + */ +#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__)) + +/** + * @brief Check whether the specified WWDG flag is set or not. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the WWDG's pending flags. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval None + */ +#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Check whether the specified WWDG interrupt source is enabled or not. + * @param __HANDLE__ WWDG Handle. + * @param __INTERRUPT__ specifies the WWDG interrupt source to check. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early Wakeup Interrupt + * @retval state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup WWDG_Exported_Functions + * @{ + */ + +/** @addtogroup WWDG_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup WWDG_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ******************************************************/ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_WWDG_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_xspi.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_xspi.h new file mode 100644 index 000000000..8371b0583 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_hal_xspi.h @@ -0,0 +1,1269 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_xspi.h + * @author MCD Application Team + * @brief Header file of XSPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_XSPI_H +#define STM32H7RSxx_HAL_XSPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined(XSPI) || defined(XSPI1) || defined(XSPI2) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup XSPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup XSPI_Exported_Types XSPI Exported Types + * @{ + */ + +/** + * @brief XSPI Init structure definition + */ +typedef struct +{ + uint32_t FifoThresholdByte; /*!< This is the threshold used by the Peripheral to generate the interrupt + indicating that data are available in reception or free place + is available in transmission. + For XSPI, this parameter can be a value between 1 and 64 */ + uint32_t MemoryMode; /*!< It Specifies the memory mode. + This parameter can be a value of @ref XSPI_MemoryMode */ + uint32_t MemoryType; /*!< It indicates the external device type connected to the XSPI. + This parameter can be a value of @ref XSPI_MemoryType */ + uint32_t MemorySize; /*!< It defines the size of the external device connected to the XSPI, + it corresponds to the number of address bits required to access + the external device. + This parameter can be a value of @ref XSPI_MemorySize*/ + uint32_t ChipSelectHighTimeCycle; /*!< It defines the minimum number of clocks which the chip select + must remain high between commands. + This parameter can be a value between 1 and 64U */ + uint32_t FreeRunningClock; /*!< It enables or not the free running clock. + This parameter can be a value of @ref XSPI_FreeRunningClock */ + uint32_t ClockMode; /*!< It indicates the level of clock when the chip select is released. + This parameter can be a value of @ref XSPI_ClockMode */ + uint32_t WrapSize; /*!< It indicates the wrap-size corresponding the external device configuration. + This parameter can be a value of @ref XSPI_WrapSize */ + uint32_t ClockPrescaler; /*!< It specifies the prescaler factor used for generating + the external clock based on the AHB clock. + This parameter can be a value between 0 and 255U */ + uint32_t SampleShifting; /*!< It allows to delay to 1/2 cycle the data sampling in order + to take in account external signal delays. + This parameter can be a value of @ref XSPI_SampleShifting */ + uint32_t DelayHoldQuarterCycle; /*!< It allows to hold to 1/4 cycle the data. + This parameter can be a value of @ref XSPI_DelayHoldQuarterCycle */ + uint32_t ChipSelectBoundary; /*!< It enables the transaction boundary feature and + defines the boundary of bytes to release the chip select. + This parameter can be a value of @ref XSPI_ChipSelectBoundary */ + uint32_t MaxTran; /*!< It enables the communication regulation feature. The chip select is + released every MaxTran+1 bytes when the other XSPI request the access + to the bus. + This parameter can be a value between 0 and 255U */ + uint32_t Refresh; /*!< It enables the refresh rate feature. The chip select is released every + Refresh+1 clock cycles. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t MemorySelect; /*!< It indicates if the output of nCS. + This parameter can be a value of @ref XSPI_MemorySelect */ +} XSPI_InitTypeDef; + +/** + * @brief HAL XSPI Handle Structure definition + */ +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +typedef struct __XSPI_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ +{ + XSPI_TypeDef *Instance; /*!< XSPI registers base address */ + XSPI_InitTypeDef Init; /*!< XSPI initialization parameters */ + uint8_t *pBuffPtr; /*!< Address of the XSPI buffer for transfer */ + __IO uint32_t XferSize; /*!< Number of data to transfer */ + __IO uint32_t XferCount; /*!< Counter of data transferred */ + DMA_HandleTypeDef *hdmatx; /*!< Handle of the DMA channel used for transmit */ + DMA_HandleTypeDef *hdmarx; /*!< Handle of the DMA channel used for receive */ + __IO uint32_t State; /*!< Internal state of the XSPI HAL driver */ + __IO uint32_t ErrorCode; /*!< Error code in case of HAL driver internal error */ + uint32_t Timeout; /*!< Timeout used for the XSPI external device access */ +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + void (* ErrorCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* AbortCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* FifoThresholdCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* CmdCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* RxCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* TxCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* RxHalfCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* TxHalfCpltCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* StatusMatchCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* TimeOutCallback)(struct __XSPI_HandleTypeDef *hxspi); + + void (* MspInitCallback)(struct __XSPI_HandleTypeDef *hxspi); + void (* MspDeInitCallback)(struct __XSPI_HandleTypeDef *hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ +} XSPI_HandleTypeDef; + +/** + * @brief HAL XSPI Regular Command Structure definition + */ +typedef struct +{ + uint32_t OperationType; /*!< It indicates if the configuration applies to the common registers or + to the registers for the write operation (these registers are only + used for memory-mapped mode). + This parameter can be a value of @ref XSPI_OperationType */ + uint32_t IOSelect; /*!< It indicates the IOs used to exchange data with external memory. + This parameter can be a value of @ref XSPI_IOSelect */ + uint32_t Instruction; /*!< It contains the instruction to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFFU */ + uint32_t InstructionMode; /*!< It indicates the mode of the instruction. + This parameter can be a value of @ref XSPI_InstructionMode */ + uint32_t InstructionWidth; /*!< It indicates the width of the instruction. + This parameter can be a value of @ref XSPI_InstructionWidth */ + uint32_t InstructionDTRMode; /*!< It enables or not the DTR mode for the instruction phase. + This parameter can be a value of @ref XSPI_InstructionDTRMode */ + uint32_t Address; /*!< It contains the address to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AddressMode; /*!< It indicates the address mode. Address mode precises number of lines + for address (except no address). + This parameter can be a value of @ref XSPI_AddressMode */ + uint32_t AddressWidth; /*!< It indicates the width of the address. + This parameter can be a value of @ref XSPI_AddressWidth */ + uint32_t AddressDTRMode; /*!< It enables or not the DTR mode for the address phase. + This parameter can be a value of @ref XSPI_AddressDTRMode */ + uint32_t AlternateBytes; /*!< It contains the alternate bytes to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AlternateBytesMode; /*!< It indicates the mode of the alternate bytes. + This parameter can be a value of @ref XSPI_AlternateBytesMode */ + uint32_t AlternateBytesWidth; /*!< It indicates the width of the alternate bytes. + This parameter can be a value of @ref XSPI_AlternateBytesWidth */ + uint32_t AlternateBytesDTRMode; /*!< It enables or not the DTR mode for the alternate bytes phase. + This parameter can be a value of @ref XSPI_AlternateBytesDTRMode */ + uint32_t DataMode; /*!< It indicates the data mode. Data mode precises number of lines + for data exchange (except no data). + This parameter can be a value of @ref XSPI_DataMode */ + uint32_t DataLength; /*!< It indicates the number of data transferred with this command. + This field is only used for indirect mode. + This parameter can be a value between 1 and 0xFFFFFFFFU */ + uint32_t DataDTRMode; /*!< It enables or not the DTR mode for the data phase. + This parameter can be a value of @ref XSPI_DataDTRMode */ + uint32_t DummyCycles; /*!< It indicates the number of dummy cycles inserted before data phase. + This parameter can be a value between 0 and 31U */ + uint32_t DQSMode; /*!< It enables or not the data strobe management. + This parameter can be a value of @ref XSPI_DQSMode */ +} XSPI_RegularCmdTypeDef; +/** + * @brief HAL XSPI Hyperbus Configuration Structure definition + */ +typedef struct +{ + uint32_t RWRecoveryTimeCycle; /*!< It indicates the number of cycles for the device read write recovery time. + This parameter can be a value between 0 and 255U */ + uint32_t AccessTimeCycle; /*!< It indicates the number of cycles for the device access time. + This parameter can be a value between 0 and 255U */ + uint32_t WriteZeroLatency; /*!< It enables or not the latency for the write access. + This parameter can be a value of @ref XSPI_WriteZeroLatency */ + uint32_t LatencyMode; /*!< It configures the latency mode. + This parameter can be a value of @ref XSPI_LatencyMode */ +} XSPI_HyperbusCfgTypeDef; + +/** + * @brief HAL XSPI Hyperbus Command Structure definition + */ +typedef struct +{ + uint32_t AddressSpace; /*!< It indicates the address space accessed by the command. + This parameter can be a value of @ref XSPI_AddressSpace */ + uint32_t Address; /*!< It contains the address to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AddressWidth; /*!< It indicates the width of the address. + This parameter can be a value of @ref XSPI_AddressWidth */ + uint32_t DataLength; /*!< It indicates the number of data transferred with this command. + This field is only used for indirect mode. + This parameter can be a value between 1 and 0xFFFFFFFF + In case of autopolling mode, this parameter can be + any value between 1 and 4 */ + uint32_t DQSMode; /*!< It enables or not the data strobe management. + This parameter can be a value of @ref XSPI_DQSMode */ + uint32_t DataMode; /*!< It indicates the data mode. Data mode precises number of lines + for data exchange (except no data). + This parameter can be a value of @ref XSPI_DataMode */ +} XSPI_HyperbusCmdTypeDef; + +/** + * @brief HAL XSPI Auto Polling mode configuration structure definition + */ +typedef struct +{ + uint32_t MatchValue; /*!< Specifies the value to be compared with the masked status register to get + a match. + This parameter can be any value between 0 and 0xFFFFFFFFU */ + uint32_t MatchMask; /*!< Specifies the mask to be applied to the status bytes received. + This parameter can be any value between 0 and 0xFFFFFFFFU */ + uint32_t MatchMode; /*!< Specifies the method used for determining a match. + This parameter can be a value of @ref XSPI_MatchMode */ + uint32_t AutomaticStop; /*!< Specifies if automatic polling is stopped after a match. + This parameter can be a value of @ref XSPI_AutomaticStop */ + uint32_t IntervalTime; /*!< Specifies the number of clock cycles between two read during automatic + polling phases. + This parameter can be any value between 0 and 0xFFFFU */ +} XSPI_AutoPollingTypeDef; + +/** + * @brief HAL XSPI Memory Mapped mode configuration structure definition + */ +typedef struct +{ + uint32_t TimeOutActivation; /*!< Specifies if the timeout counter is enabled to release the chip select. + This parameter can be a value of @ref XSPI_TimeOutActivation */ + uint32_t TimeoutPeriodClock; /*!< Specifies the number of clock to wait when the FIFO is full before to + release the chip select. + This parameter can be any value between 0 and 0xFFFFU */ +} XSPI_MemoryMappedTypeDef; + +/** + * @brief HAL XSPI IO Manager Configuration structure definition + */ +typedef struct +{ + uint32_t nCSOverride; /*!< It indicates Chip select selector override setting for XSPI. + This parameter can be a value @ref XSPIM_MemorySelect_Override */ + uint32_t IOPort; /*!< It indicates which port of the XSPI IO Manager is used for the instance. + This parameter can be a value of @ref XSPI_IO_Manger_IOPort */ + uint32_t Req2AckTime; /*!< It indicates the minimum switching duration (in number of clock cycles) + expected if some signals are multiplexed in the XSPI IO Manager with the + other XSPI. + This parameter can be a value between 1 and 256 */ +} XSPIM_CfgTypeDef; + +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL XSPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_XSPI_ERROR_CB_ID = 0x00U, /*!< XSPI Error Callback ID */ + HAL_XSPI_ABORT_CB_ID = 0x01U, /*!< XSPI Abort Callback ID */ + HAL_XSPI_FIFO_THRESHOLD_CB_ID = 0x02U, /*!< XSPI FIFO Threshold Callback ID */ + HAL_XSPI_CMD_CPLT_CB_ID = 0x03U, /*!< XSPI Command Complete Callback ID */ + HAL_XSPI_RX_CPLT_CB_ID = 0x04U, /*!< XSPI Rx Complete Callback ID */ + HAL_XSPI_TX_CPLT_CB_ID = 0x05U, /*!< XSPI Tx Complete Callback ID */ + HAL_XSPI_RX_HALF_CPLT_CB_ID = 0x06U, /*!< XSPI Rx Half Complete Callback ID */ + HAL_XSPI_TX_HALF_CPLT_CB_ID = 0x07U, /*!< XSPI Tx Half Complete Callback ID */ + HAL_XSPI_STATUS_MATCH_CB_ID = 0x08U, /*!< XSPI Status Match Callback ID */ + HAL_XSPI_TIMEOUT_CB_ID = 0x09U, /*!< XSPI Timeout Callback ID */ + HAL_XSPI_MSP_INIT_CB_ID = 0x0AU, /*!< XSPI MspInit Callback ID */ + HAL_XSPI_MSP_DEINIT_CB_ID = 0x0BU /*!< XSPI MspDeInit Callback ID */ +} HAL_XSPI_CallbackIDTypeDef; + +/** + * @brief HAL XSPI Callback pointer definition + */ +typedef void (*pXSPI_CallbackTypeDef)(XSPI_HandleTypeDef *hxspi); + +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ +/** + * @brief HAL XSPI High-speed interface calibration structure definition + */ +typedef struct +{ + uint32_t DelayValueType; /*!< It indicates which calibration is concerned by the configuration. + This parameter can be a value of @ref XSPI_DelayType */ + uint32_t FineCalibrationUnit; /*!< It indicates the fine calibration value of the delay. + This parameter can be a value between 0 and 0x7FU */ + uint32_t CoarseCalibrationUnit; /*!< It indicates the coarse calibration value of the delay. + This parameter can be a value between 0 and 0x1FU */ + uint32_t MaxCalibration; /*!< It indicates that the calibration is outside the range of DLL master. + It applies only when the DelayValueType is HAL_XSPI_CAL_FULL_CYCLE_DELAY. + This parameter can be a value of @ref XSPI_MaxCal */ +} XSPI_HSCalTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup XSPI_Exported_Constants XSPI Exported Constants + * @{ + */ + +/** @defgroup XSPI_State XSPI State + * @{ + */ +#define HAL_XSPI_STATE_RESET (0x00000000U) /*!< Initial state */ +#define HAL_XSPI_STATE_READY (0x00000002U) /*!< Driver ready to be used */ +#define HAL_XSPI_STATE_HYPERBUS_INIT (0x00000001U) /*!< Initialization done in hyperbus mode but timing configuration not done */ +#define HAL_XSPI_STATE_CMD_CFG (0x00000004U) /*!< Command (regular or hyperbus) configured, ready for an action */ +#define HAL_XSPI_STATE_READ_CMD_CFG (0x00000014U) /*!< Read command configuration done, not the write command configuration */ +#define HAL_XSPI_STATE_WRITE_CMD_CFG (0x00000024U) /*!< Write command configuration done, not the read command configuration */ +#define HAL_XSPI_STATE_BUSY_CMD (0x00000008U) /*!< Command without data on-going */ +#define HAL_XSPI_STATE_BUSY_TX (0x00000018U) /*!< Indirect Tx on-going */ +#define HAL_XSPI_STATE_BUSY_RX (0x00000028U) /*!< Indirect Rx on-going */ +#define HAL_XSPI_STATE_BUSY_AUTO_POLLING (0x00000048U) /*!< Auto-polling on-going */ +#define HAL_XSPI_STATE_BUSY_MEM_MAPPED (0x00000088U) /*!< Memory-mapped on-going */ +#define HAL_XSPI_STATE_ABORT (0x00000100U) /*!< Abort on-going */ +#define HAL_XSPI_STATE_ERROR (0x00000200U) /*!< Blocking error, driver should be re-initialized */ +/** + * @} + */ + +/** @defgroup XSPI_ErrorCode XSPI Error Code + * @{ + */ +#define HAL_XSPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_XSPI_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#define HAL_XSPI_ERROR_TRANSFER (0x00000002U) /*!< Transfer error */ +#define HAL_XSPI_ERROR_DMA (0x00000004U) /*!< DMA transfer error */ +#define HAL_XSPI_ERROR_INVALID_PARAM (0x00000008U) /*!< Invalid parameters error */ +#define HAL_XSPI_ERROR_INVALID_SEQUENCE (0x00000010U) /*!< Sequence is incorrect */ +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +#define HAL_XSPI_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid callback error */ +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ +/** + * @} + */ + +/** @defgroup XSPI_MemoryMode XSPI Memory Mode + * @{ + */ +#define HAL_XSPI_SINGLE_MEM (0x00000000U) /*!< Dual-memory mode disabled */ +#define HAL_XSPI_DUAL_MEM (XSPI_CR_DMM) /*!< Dual mode enabled */ + +/** + * @} + */ + +/** @defgroup XSPI_MemoryType XSPI Memory Type + * @{ + */ +#define HAL_XSPI_MEMTYPE_MICRON (0x00000000U) /*!< Micron mode */ +#define HAL_XSPI_MEMTYPE_MACRONIX (XSPI_DCR1_MTYP_0) /*!< Macronix mode */ +#define HAL_XSPI_MEMTYPE_APMEM (XSPI_DCR1_MTYP_1) /*!< AP Memory mode */ +#define HAL_XSPI_MEMTYPE_MACRONIX_RAM ((XSPI_DCR1_MTYP_1 | XSPI_DCR1_MTYP_0)) /*!< Macronix RAM mode*/ +#define HAL_XSPI_MEMTYPE_HYPERBUS (XSPI_DCR1_MTYP_2) /*!< Hyperbus mode */ +#define HAL_XSPI_MEMTYPE_APMEM_16BITS ((XSPI_DCR1_MTYP_2 | XSPI_DCR1_MTYP_1)) /*!< AP Memory mode */ + +/** + * @} + */ + +/** @defgroup XSPI_MemorySize XSPI Memory Size + * @{ + */ +#define HAL_XSPI_SIZE_16B (0x00000000U) /*!< 16 bits ( 2 Byte = 2^( 0+1)) */ +#define HAL_XSPI_SIZE_32B (0x00000001U) /*!< 32 bits ( 4 Byte = 2^( 1+1)) */ +#define HAL_XSPI_SIZE_64B (0x00000002U) /*!< 64 bits ( 8 Byte = 2^( 2+1)) */ +#define HAL_XSPI_SIZE_128B (0x00000003U) /*!< 128 bits ( 16 Byte = 2^( 3+1)) */ +#define HAL_XSPI_SIZE_256B (0x00000004U) /*!< 256 bits ( 32 Byte = 2^( 4+1)) */ +#define HAL_XSPI_SIZE_512B (0x00000005U) /*!< 512 bits ( 64 Byte = 2^( 5+1)) */ +#define HAL_XSPI_SIZE_1KB (0x00000006U) /*!< 1 Kbits (128 Byte = 2^( 6+1)) */ +#define HAL_XSPI_SIZE_2KB (0x00000007U) /*!< 2 Kbits (256 Byte = 2^( 7+1)) */ +#define HAL_XSPI_SIZE_4KB (0x00000008U) /*!< 4 Kbits (512 Byte = 2^( 8+1)) */ +#define HAL_XSPI_SIZE_8KB (0x00000009U) /*!< 8 Kbits ( 1 KByte = 2^( 9+1)) */ +#define HAL_XSPI_SIZE_16KB (0x0000000AU) /*!< 16 Kbits ( 2 KByte = 2^(10+1)) */ +#define HAL_XSPI_SIZE_32KB (0x0000000BU) /*!< 32 Kbits ( 4 KByte = 2^(11+1)) */ +#define HAL_XSPI_SIZE_64KB (0x0000000CU) /*!< 64 Kbits ( 8 KByte = 2^(12+1)) */ +#define HAL_XSPI_SIZE_128KB (0x0000000DU) /*!< 128 Kbits ( 16 KByte = 2^(13+1)) */ +#define HAL_XSPI_SIZE_256KB (0x0000000EU) /*!< 256 Kbits ( 32 KByte = 2^(14+1)) */ +#define HAL_XSPI_SIZE_512KB (0x0000000FU) /*!< 512 Kbits ( 64 KByte = 2^(15+1)) */ +#define HAL_XSPI_SIZE_1MB (0x00000010U) /*!< 1 Mbits (128 KByte = 2^(16+1)) */ +#define HAL_XSPI_SIZE_2MB (0x00000011U) /*!< 2 Mbits (256 KByte = 2^(17+1)) */ +#define HAL_XSPI_SIZE_4MB (0x00000012U) /*!< 4 Mbits (512 KByte = 2^(18+1)) */ +#define HAL_XSPI_SIZE_8MB (0x00000013U) /*!< 8 Mbits ( 1 MByte = 2^(19+1)) */ +#define HAL_XSPI_SIZE_16MB (0x00000014U) /*!< 16 Mbits ( 2 MByte = 2^(20+1)) */ +#define HAL_XSPI_SIZE_32MB (0x00000015U) /*!< 32 Mbits ( 4 MByte = 2^(21+1)) */ +#define HAL_XSPI_SIZE_64MB (0x00000016U) /*!< 64 Mbits ( 8 MByte = 2^(22+1)) */ +#define HAL_XSPI_SIZE_128MB (0x00000017U) /*!< 128 Mbits ( 16 MByte = 2^(23+1)) */ +#define HAL_XSPI_SIZE_256MB (0x00000018U) /*!< 256 Mbits ( 32 MByte = 2^(24+1)) */ +#define HAL_XSPI_SIZE_512MB (0x00000019U) /*!< 512 Mbits ( 64 MByte = 2^(25+1)) */ +#define HAL_XSPI_SIZE_1GB (0x0000001AU) /*!< 1 Gbits (128 MByte = 2^(26+1)) */ +#define HAL_XSPI_SIZE_2GB (0x0000001BU) /*!< 2 Gbits (256 MByte = 2^(27+1)) */ +#define HAL_XSPI_SIZE_4GB (0x0000001CU) /*!< 4 Gbits (256 MByte = 2^(28+1)) */ +#define HAL_XSPI_SIZE_8GB (0x0000001DU) /*!< 8 Gbits (256 MByte = 2^(29+1)) */ +#define HAL_XSPI_SIZE_16GB (0x0000001EU) /*!< 16 Gbits (256 MByte = 2^(30+1)) */ +#define HAL_XSPI_SIZE_32GB (0x0000001FU) /*!< 32 Gbits (256 MByte = 2^(31+1)) */ +/** + * @} + */ + +/** @defgroup XSPI_FreeRunningClock XSPI Free Running Clock + * @{ + */ +#define HAL_XSPI_FREERUNCLK_DISABLE (0x00000000U) /*!< CLK is not free running */ +#define HAL_XSPI_FREERUNCLK_ENABLE ((uint32_t)XSPI_DCR1_FRCK) /*!< CLK is always provided (running) */ +/** + * @} + */ + +/** @defgroup XSPI_ClockMode XSPI Clock Mode + * @{ + */ +#define HAL_XSPI_CLOCK_MODE_0 (0x00000000U) /*!< CLK must stay low while nCS is high */ +#define HAL_XSPI_CLOCK_MODE_3 ((uint32_t)XSPI_DCR1_CKMODE) /*!< CLK must stay high while nCS is high */ +/** + * @} + */ + +/** @defgroup XSPI_WrapSize XSPI Wrap-Size + * @{ + */ +#define HAL_XSPI_WRAP_NOT_SUPPORTED (0x00000000U) /*!< wrapped reads are not supported by the memory */ +#define HAL_XSPI_WRAP_16_BYTES ((uint32_t)XSPI_DCR2_WRAPSIZE_1) /*!< external memory supports wrap size of 16 bytes */ +#define HAL_XSPI_WRAP_32_BYTES ((uint32_t)(XSPI_DCR2_WRAPSIZE_0 | XSPI_DCR2_WRAPSIZE_1)) /*!< external memory supports wrap size of 32 bytes */ +#define HAL_XSPI_WRAP_64_BYTES ((uint32_t)XSPI_DCR2_WRAPSIZE_2) /*!< external memory supports wrap size of 64 bytes */ +#define HAL_XSPI_WRAP_128_BYTES ((uint32_t)(XSPI_DCR2_WRAPSIZE_0 | XSPI_DCR2_WRAPSIZE_2)) /*!< external memory supports wrap size of 128 bytes */ +/** + * @} + */ + +/** @defgroup XSPI_SampleShifting XSPI Sample Shifting + * @{ + */ +#define HAL_XSPI_SAMPLE_SHIFT_NONE (0x00000000U) /*!< No shift */ +#define HAL_XSPI_SAMPLE_SHIFT_HALFCYCLE ((uint32_t)XSPI_TCR_SSHIFT) /*!< 1/2 cycle shift */ +/** + * @} + */ + +/** @defgroup XSPI_DelayHoldQuarterCycle XSPI Delay Hold Quarter Cycle + * @{ + */ +#define HAL_XSPI_DHQC_DISABLE (0x00000000U) /*!< No Delay */ +#define HAL_XSPI_DHQC_ENABLE ((uint32_t)XSPI_TCR_DHQC) /*!< Delay Hold 1/4 cycle */ +/** + * @} + */ + +/** @defgroup XSPI_ChipSelectBoundary XSPI Chip Select Boundary + * @{ + */ +#define HAL_XSPI_BONDARYOF_NONE (0x00000000U) /*! CS boundary disabled */ +#define HAL_XSPI_BONDARYOF_16B (0x00000001U) /*!< 16 bits ( 2 Byte = 2^(1)) */ +#define HAL_XSPI_BONDARYOF_32B (0x00000002U) /*!< 32 bits ( 4 Byte = 2^(2)) */ +#define HAL_XSPI_BONDARYOF_64B (0x00000003U) /*!< 64 bits ( 8 Byte = 2^(3)) */ +#define HAL_XSPI_BONDARYOF_128B (0x00000004U) /*!< 128 bits ( 16 Byte = 2^(4)) */ +#define HAL_XSPI_BONDARYOF_256B (0x00000005U) /*!< 256 bits ( 32 Byte = 2^(5)) */ +#define HAL_XSPI_BONDARYOF_512B (0x00000006U) /*!< 512 bits ( 64 Byte = 2^(6)) */ +#define HAL_XSPI_BONDARYOF_1KB (0x00000007U) /*!< 1 Kbits (128 Byte = 2^(7)) */ +#define HAL_XSPI_BONDARYOF_2KB (0x00000008U) /*!< 2 Kbits (256 Byte = 2^(8)) */ +#define HAL_XSPI_BONDARYOF_4KB (0x00000009U) /*!< 4 Kbits (512 Byte = 2^(9)) */ +#define HAL_XSPI_BONDARYOF_8KB (0x0000000AU) /*!< 8 Kbits ( 1 KByte = 2^(10)) */ +#define HAL_XSPI_BONDARYOF_16KB (0x0000000BU) /*!< 16 Kbits ( 2 KByte = 2^(11)) */ +#define HAL_XSPI_BONDARYOF_32KB (0x0000000CU) /*!< 32 Kbits ( 4 KByte = 2^(12)) */ +#define HAL_XSPI_BONDARYOF_64KB (0x0000000DU) /*!< 64 Kbits ( 8 KByte = 2^(13)) */ +#define HAL_XSPI_BONDARYOF_128KB (0x0000000EU) /*!< 128 Kbits ( 16 KByte = 2^(14)) */ +#define HAL_XSPI_BONDARYOF_256KB (0x0000000FU) /*!< 256 Kbits ( 32 KByte = 2^(15)) */ +#define HAL_XSPI_BONDARYOF_512KB (0x00000010U) /*!< 512 Kbits ( 64 KByte = 2^(16)) */ +#define HAL_XSPI_BONDARYOF_1MB (0x00000011U) /*!< 1 Mbits (128 KByte = 2^(17)) */ +#define HAL_XSPI_BONDARYOF_2MB (0x00000012U) /*!< 2 Mbits (256 KByte = 2^(18)) */ +#define HAL_XSPI_BONDARYOF_4MB (0x00000013U) /*!< 4 Mbits (512 KByte = 2^(19)) */ +#define HAL_XSPI_BONDARYOF_8MB (0x00000014U) /*!< 8 Mbits ( 1 MByte = 2^(20)) */ +#define HAL_XSPI_BONDARYOF_16MB (0x00000015U) /*!< 16 Mbits ( 2 MByte = 2^(21)) */ +#define HAL_XSPI_BONDARYOF_32MB (0x00000016U) /*!< 32 Mbits ( 4 MByte = 2^(22)) */ +#define HAL_XSPI_BONDARYOF_64MB (0x00000017U) /*!< 64 Mbits ( 8 MByte = 2^(23)) */ +#define HAL_XSPI_BONDARYOF_128MB (0x00000018U) /*!< 128 Mbits ( 16 MByte = 2^(24)) */ +#define HAL_XSPI_BONDARYOF_256MB (0x00000019U) /*!< 256 Mbits ( 32 MByte = 2^(25)) */ +#define HAL_XSPI_BONDARYOF_512MB (0x0000001AU) /*!< 512 Mbits ( 64 MByte = 2^(26)) */ +#define HAL_XSPI_BONDARYOF_1GB (0x0000001BU) /*!< 1 Gbits (128 MByte = 2^(27)) */ +#define HAL_XSPI_BONDARYOF_2GB (0x0000001CU) /*!< 2 Gbits (256 MByte = 2^(28)) */ +#define HAL_XSPI_BONDARYOF_4GB (0x0000001DU) /*!< 4 Gbits (512 MByte = 2^(29)) */ +#define HAL_XSPI_BONDARYOF_8GB (0x0000001EU) /*!< 8 Gbits ( 1 GByte = 2^(30)) */ +#define HAL_XSPI_BONDARYOF_16GB (0x0000001FU) /*!< 16 Gbits ( 2 GByte = 2^(31)) */ +/** + * @} + */ + +/** @defgroup XSPI_MemorySelect XSPI Memory Select + * @{ + */ +#define HAL_XSPI_CSSEL_NCS1 (0x00000000U) /*!< The output of nCS is nCS1 */ +#define HAL_XSPI_CSSEL_NCS2 ((uint32_t)XSPI_CR_CSSEL) /*!< The output of nCS is nCS2 */ +/** + * @} + */ + +/** @defgroup XSPI_OperationType XSPI Operation Type + * @{ + */ +#define HAL_XSPI_OPTYPE_COMMON_CFG (0x00000000U) /*!< Common configuration (indirect or auto-polling mode) */ +#define HAL_XSPI_OPTYPE_READ_CFG (0x00000001U) /*!< Read configuration (memory-mapped mode) */ +#define HAL_XSPI_OPTYPE_WRITE_CFG (0x00000002U) /*!< Write configuration (memory-mapped mode) */ +#define HAL_XSPI_OPTYPE_WRAP_CFG (0x00000003U) /*!< Wrap configuration (memory-mapped mode) */ + +/** + * @} + */ + +/** @defgroup XSPI_IOSelect XSPI IO Select + * @{ + */ +#define HAL_XSPI_SELECT_IO_3_0 (0x00000000U) /*!< Data exchanged over IO[3:0] */ +#define HAL_XSPI_SELECT_IO_7_4 ((uint32_t)XSPI_CR_MSEL_0) /*!< Data exchanged over IO[7:4] */ +#define HAL_XSPI_SELECT_IO_11_8 ((uint32_t)XSPI_CR_MSEL_1) /*!< Data exchanged over IO[11:8] */ +#define HAL_XSPI_SELECT_IO_15_12 ((uint32_t)XSPI_CR_MSEL ) /*!< Data exchanged over IO[15:12] */ +#define HAL_XSPI_SELECT_IO_7_0 (0x00000000U) /*!< Data exchanged over IO[7:0] */ +#define HAL_XSPI_SELECT_IO_15_8 ((uint32_t)XSPI_CR_MSEL_1) /*!< Data exchanged over IO[15:8] */ +/** + * @} + */ + +/** @defgroup XSPI_InstructionMode XSPI Instruction Mode + * @{ + */ +#define HAL_XSPI_INSTRUCTION_NONE (0x00000000U) /*!< No instruction */ +#define HAL_XSPI_INSTRUCTION_1_LINE ((uint32_t)XSPI_CCR_IMODE_0) /*!< Instruction on a single line */ +#define HAL_XSPI_INSTRUCTION_2_LINES ((uint32_t)XSPI_CCR_IMODE_1) /*!< Instruction on two lines */ +#define HAL_XSPI_INSTRUCTION_4_LINES ((uint32_t)(XSPI_CCR_IMODE_0 | XSPI_CCR_IMODE_1)) /*!< Instruction on four lines */ +#define HAL_XSPI_INSTRUCTION_8_LINES ((uint32_t)XSPI_CCR_IMODE_2) /*!< Instruction on eight lines */ +/** + * @} + */ + +/** @defgroup XSPI_InstructionWidth XSPI Instruction Width + * @{ + */ +#define HAL_XSPI_INSTRUCTION_8_BITS (0x00000000U) /*!< 8-bit instruction */ +#define HAL_XSPI_INSTRUCTION_16_BITS ((uint32_t)XSPI_CCR_ISIZE_0) /*!< 16-bit instruction */ +#define HAL_XSPI_INSTRUCTION_24_BITS ((uint32_t)XSPI_CCR_ISIZE_1) /*!< 24-bit instruction */ +#define HAL_XSPI_INSTRUCTION_32_BITS ((uint32_t)XSPI_CCR_ISIZE) /*!< 32-bit instruction */ +/** + * @} + */ + +/** @defgroup XSPI_InstructionDTRMode XSPI Instruction DTR Mode + * @{ + */ +#define HAL_XSPI_INSTRUCTION_DTR_DISABLE (0x00000000U) /*!< DTR mode disabled for instruction phase */ +#define HAL_XSPI_INSTRUCTION_DTR_ENABLE ((uint32_t)XSPI_CCR_IDTR) /*!< DTR mode enabled for instruction phase */ +/** + * @} + */ + +/** @defgroup XSPI_AddressMode XSPI Address Mode + * @{ + */ +#define HAL_XSPI_ADDRESS_NONE (0x00000000U) /*!< No address */ +#define HAL_XSPI_ADDRESS_1_LINE ((uint32_t)XSPI_CCR_ADMODE_0) /*!< Address on a single line */ +#define HAL_XSPI_ADDRESS_2_LINES ((uint32_t)XSPI_CCR_ADMODE_1) /*!< Address on two lines */ +#define HAL_XSPI_ADDRESS_4_LINES ((uint32_t)(XSPI_CCR_ADMODE_0 | XSPI_CCR_ADMODE_1)) /*!< Address on four lines */ +#define HAL_XSPI_ADDRESS_8_LINES ((uint32_t)XSPI_CCR_ADMODE_2) /*!< Address on eight lines */ +/** + * @} + */ + +/** @defgroup XSPI_AddressWidth XSPI Address width + * @{ + */ +#define HAL_XSPI_ADDRESS_8_BITS (0x00000000U) /*!< 8-bit address */ +#define HAL_XSPI_ADDRESS_16_BITS ((uint32_t)XSPI_CCR_ADSIZE_0) /*!< 16-bit address */ +#define HAL_XSPI_ADDRESS_24_BITS ((uint32_t)XSPI_CCR_ADSIZE_1) /*!< 24-bit address */ +#define HAL_XSPI_ADDRESS_32_BITS ((uint32_t)XSPI_CCR_ADSIZE) /*!< 32-bit address */ +/** + * @} + */ + +/** @defgroup XSPI_AddressDTRMode XSPI Address DTR Mode + * @{ + */ +#define HAL_XSPI_ADDRESS_DTR_DISABLE (0x00000000U) /*!< DTR mode disabled for address phase */ +#define HAL_XSPI_ADDRESS_DTR_ENABLE ((uint32_t)XSPI_CCR_ADDTR) /*!< DTR mode enabled for address phase */ +/** + * @} + */ + +/** @defgroup XSPI_AlternateBytesMode XSPI Alternate Bytes Mode + * @{ + */ +#define HAL_XSPI_ALT_BYTES_NONE (0x00000000U) /*!< No alternate bytes */ +#define HAL_XSPI_ALT_BYTES_1_LINE ((uint32_t)XSPI_CCR_ABMODE_0) /*!< Alternate bytes on a single line */ +#define HAL_XSPI_ALT_BYTES_2_LINES ((uint32_t)XSPI_CCR_ABMODE_1) /*!< Alternate bytes on two lines */ +#define HAL_XSPI_ALT_BYTES_4_LINES ((uint32_t)(XSPI_CCR_ABMODE_0 | XSPI_CCR_ABMODE_1)) /*!< Alternate bytes on four lines */ +#define HAL_XSPI_ALT_BYTES_8_LINES ((uint32_t)XSPI_CCR_ABMODE_2) /*!< Alternate bytes on eight lines */ +/** + * @} + */ + +/** @defgroup XSPI_AlternateBytesWidth XSPI Alternate Bytes Width + * @{ + */ +#define HAL_XSPI_ALT_BYTES_8_BITS (0x00000000U) /*!< 8-bit alternate bytes */ +#define HAL_XSPI_ALT_BYTES_16_BITS ((uint32_t)XSPI_CCR_ABSIZE_0) /*!< 16-bit alternate bytes */ +#define HAL_XSPI_ALT_BYTES_24_BITS ((uint32_t)XSPI_CCR_ABSIZE_1) /*!< 24-bit alternate bytes */ +#define HAL_XSPI_ALT_BYTES_32_BITS ((uint32_t)XSPI_CCR_ABSIZE) /*!< 32-bit alternate bytes */ +/** + * @} + */ + +/** @defgroup XSPI_AlternateBytesDTRMode XSPI Alternate Bytes DTR Mode + * @{ + */ +#define HAL_XSPI_ALT_BYTES_DTR_DISABLE (0x00000000U) /*!< DTR mode disabled for alternate bytes phase */ +#define HAL_XSPI_ALT_BYTES_DTR_ENABLE ((uint32_t)XSPI_CCR_ABDTR) /*!< DTR mode enabled for alternate bytes phase */ +/** + * @} + */ + +/** @defgroup XSPI_DataMode XSPI Data Mode + * @{ + */ +#define HAL_XSPI_DATA_NONE (0x00000000U) /*!< No data */ +#define HAL_XSPI_DATA_1_LINE ((uint32_t)XSPI_CCR_DMODE_0) /*!< Data on a single line */ +#define HAL_XSPI_DATA_2_LINES ((uint32_t)XSPI_CCR_DMODE_1) /*!< Data on two lines */ +#define HAL_XSPI_DATA_4_LINES ((uint32_t)(XSPI_CCR_DMODE_0 | XSPI_CCR_DMODE_1)) /*!< Data on four lines */ +#define HAL_XSPI_DATA_8_LINES ((uint32_t)XSPI_CCR_DMODE_2) /*!< Data on eight lines */ +#define HAL_XSPI_DATA_16_LINES ((uint32_t)(XSPI_CCR_DMODE_0 | XSPI_CCR_DMODE_2)) /*!< Data on sixteen lines valid for HSPI only */ +/** + * @} + */ + +/** @defgroup XSPI_DataDTRMode XSPI Data DTR Mode + * @{ + */ +#define HAL_XSPI_DATA_DTR_DISABLE (0x00000000U) /*!< DTR mode disabled for data phase */ +#define HAL_XSPI_DATA_DTR_ENABLE ((uint32_t)XSPI_CCR_DDTR) /*!< DTR mode enabled for data phase */ +/** + * @} + */ + +/** @defgroup XSPI_DQSMode XSPI DQS Mode + * @{ + */ +#define HAL_XSPI_DQS_DISABLE (0x00000000U) /*!< DQS disabled */ +#define HAL_XSPI_DQS_ENABLE ((uint32_t)XSPI_CCR_DQSE) /*!< DQS enabled */ +/** + * @} + */ + +/** @defgroup XSPI_WriteZeroLatency XSPI Hyperbus Write Zero Latency Activation + * @{ + */ +#define HAL_XSPI_LATENCY_ON_WRITE (0x00000000U) /*!< Latency on write accesses */ +#define HAL_XSPI_NO_LATENCY_ON_WRITE ((uint32_t)XSPI_HLCR_WZL) /*!< No latency on write accesses */ +/** + * @} + */ + +/** @defgroup XSPI_LatencyMode XSPI Hyperbus Latency Mode + * @{ + */ +#define HAL_XSPI_VARIABLE_LATENCY (0x00000000U) /*!< Variable initial latency */ +#define HAL_XSPI_FIXED_LATENCY ((uint32_t)XSPI_HLCR_LM) /*!< Fixed latency */ +/** + * @} + */ + +/** @defgroup XSPI_AddressSpace XSPI Hyperbus Address Space + * @{ + */ +#define HAL_XSPI_MEMORY_ADDRESS_SPACE (0x00000000U) /*!< HyperBus memory mode */ +#define HAL_XSPI_REGISTER_ADDRESS_SPACE ((uint32_t)XSPI_DCR1_MTYP_0) /*!< HyperBus register mode */ +/** + * @} + */ + +/** @defgroup XSPI_MatchMode XSPI Match Mode + * @{ + */ +#define HAL_XSPI_MATCH_MODE_AND (0x00000000U) /*!< AND match mode between unmasked bits */ +#define HAL_XSPI_MATCH_MODE_OR ((uint32_t)XSPI_CR_PMM) /*!< OR match mode between unmasked bits */ +/** + * @} + */ + +/** @defgroup XSPI_AutomaticStop XSPI Automatic Stop + * @{ + */ +#define HAL_XSPI_AUTOMATIC_STOP_DISABLE (0x00000000U) /*!< AutoPolling stops only with abort or XSPI disabling */ +#define HAL_XSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)XSPI_CR_APMS) /*!< AutoPolling stops as soon as there is a match */ +/** + * @} + */ + +/** @defgroup XSPI_TimeOutActivation XSPI Timeout Activation + * @{ + */ +#define HAL_XSPI_TIMEOUT_COUNTER_DISABLE (0x00000000U) /*!< Timeout counter disabled, nCS remains active */ +#define HAL_XSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)XSPI_CR_TCEN) /*!< Timeout counter enabled, nCS released when timeout expires */ +/** + * @} + */ + +/** @defgroup XSPI_Flags XSPI Flags + * @{ + */ +#define HAL_XSPI_FLAG_BUSY XSPI_SR_BUSY /*!< Busy flag: operation is ongoing */ +#define HAL_XSPI_FLAG_TO XSPI_SR_TOF /*!< Timeout flag: timeout occurs in memory-mapped mode */ +#define HAL_XSPI_FLAG_SM XSPI_SR_SMF /*!< Status match flag: received data matches in autopolling mode */ +#define HAL_XSPI_FLAG_FT XSPI_SR_FTF /*!< Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete */ +#define HAL_XSPI_FLAG_TC XSPI_SR_TCF /*!< Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted */ +#define HAL_XSPI_FLAG_TE XSPI_SR_TEF /*!< Transfer error flag: invalid address is being accessed */ +/** + * @} + */ + +/** @defgroup XSPI_Interrupts XSPI Interrupts + * @{ + */ +#define HAL_XSPI_IT_TO XSPI_CR_TOIE /*!< Interrupt on the timeout flag */ +#define HAL_XSPI_IT_SM XSPI_CR_SMIE /*!< Interrupt on the status match flag */ +#define HAL_XSPI_IT_FT XSPI_CR_FTIE /*!< Interrupt on the fifo threshold flag */ +#define HAL_XSPI_IT_TC XSPI_CR_TCIE /*!< Interrupt on the transfer complete flag */ +#define HAL_XSPI_IT_TE XSPI_CR_TEIE /*!< Interrupt on the transfer error flag */ +/** + * @} + */ + +/** @defgroup XSPI_Timeout_definition XSPI Timeout definition + * @{ + */ +#define HAL_XSPI_TIMEOUT_DEFAULT_VALUE (5000U) /* 5 s */ +/** + * @} + */ + +/** @defgroup XSPI_IO_Manger_IOPort XSPI IO Port + * @{ + */ +#define HAL_XSPIM_IOPORT_1 (0x00000000U) /*!< Port 1 */ +#define HAL_XSPIM_IOPORT_2 (0x00000001U) /*!< Port 2 */ +/** + * @} + */ + + +/** @defgroup XSPI_DelayType XSPI Calibration Delay Type + * @{ + */ +#define HAL_XSPI_CAL_FULL_CYCLE_DELAY (0x00000000U) /*!< Delay value equivalent to full memory-clock cycle */ +#define HAL_XSPI_CAL_FEEDBACK_CLK_DELAY (0x00000001U) /*!< Delay value for the feedback clock when reading without DQS */ +#define HAL_XSPI_CAL_DATA_OUTPUT_DELAY (0x00000002U) /*!< Delay value for output data in DDR mode for write operations */ +#define HAL_XSPI_CAL_DQS_INPUT_DELAY (0x00000003U) /*!< Delay value for DQS input when sampling data for read operations */ +/** + * @} + */ + +/** @defgroup XSPIM_MemorySelect_Override XSPIM Memory Select Override + * @{ + */ +#define HAL_XSPI_CSSEL_OVR_DISABLED (0x00000000U) +#define HAL_XSPI_CSSEL_OVR_NCS1 (0x00000010U) /*!< The chip select signal from XSPI is sent to NCS1 */ +#define HAL_XSPI_CSSEL_OVR_NCS2 (0x00000070U) /*!< The chip select signal from XSPI is sent to NCS2 */ +/** + * @} + */ + +/** @defgroup XSPI_MaxCal XSPI Calibration Maximal Value + * @{ + */ +#define HAL_XSPI_MAXCAL_NOT_REACHED (0x00000000U) /*!< Memory-clock perido inside the range of DLL master */ +#define HAL_XSPI_MAXCAL_REACHED ((uint32_t)XSPI_CALFCR_CALMAX) /*!< Memory-clock period outside the range of DLL master (max delay values used) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup XSPI_Exported_Macros XSPI Exported Macros + * @{ + */ +/** @brief Reset XSPI handle state. + * @param __HANDLE__ specifies the XSPI Handle. + * @retval None + */ +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +#define HAL_XSPI_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_XSPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define HAL_XSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_XSPI_STATE_RESET) +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + +/** @brief Enable the XSPI peripheral. + * @param __HANDLE__ specifies the XSPI Handle. + * @retval None + */ +#define HAL_XSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, XSPI_CR_EN) + +/** @brief Disable the XSPI peripheral. + * @param __HANDLE__ specifies the XSPI Handle. + * @retval None + */ +#define HAL_XSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, XSPI_CR_EN) + +/** @brief Enable the specified XSPI interrupt. + * @param __HANDLE__ specifies the XSPI Handle. + * @param __INTERRUPT__ specifies the XSPI interrupt source to enable. + * This parameter can be one of the following values: + * @arg HAL_XSPI_IT_TO: XSPI Timeout interrupt + * @arg HAL_XSPI_IT_SM: XSPI Status match interrupt + * @arg HAL_XSPI_IT_FT: XSPI FIFO threshold interrupt + * @arg HAL_XSPI_IT_TC: XSPI Transfer complete interrupt + * @arg HAL_XSPI_IT_TE: XSPI Transfer error interrupt + * @retval None + */ +#define HAL_XSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** @brief Disable the specified XSPI interrupt. + * @param __HANDLE__ specifies the XSPI Handle. + * @param __INTERRUPT__ specifies the XSPI interrupt source to disable. + * This parameter can be one of the following values: + * @arg HAL_XSPI_IT_TO: XSPI Timeout interrupt + * @arg HAL_XSPI_IT_SM: XSPI Status match interrupt + * @arg HAL_XSPI_IT_FT: XSPI FIFO threshold interrupt + * @arg HAL_XSPI_IT_TC: XSPI Transfer complete interrupt + * @arg HAL_XSPI_IT_TE: XSPI Transfer error interrupt + * @retval None + */ +#define HAL_XSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** @brief Check whether the specified XSPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the XSPI Handle. + * @param __INTERRUPT__ specifies the XSPI interrupt source to check. + * This parameter can be one of the following values: + * @arg HAL_XSPI_IT_TO: XSPI Timeout interrupt + * @arg HAL_XSPI_IT_SM: XSPI Status match interrupt + * @arg HAL_XSPI_IT_FT: XSPI FIFO threshold interrupt + * @arg HAL_XSPI_IT_TC: XSPI Transfer complete interrupt + * @arg HAL_XSPI_IT_TE: XSPI Transfer error interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define HAL_XSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))\ + == (__INTERRUPT__)) + +/** + * @brief Check whether the selected XSPI flag is set or not. + * @param __HANDLE__ specifies the XSPI Handle. + * @param __FLAG__ specifies the XSPI flag to check. + * This parameter can be one of the following values: + * @arg HAL_XSPI_FLAG_BUSY: XSPI Busy flag + * @arg HAL_XSPI_FLAG_TO: XSPI Timeout flag + * @arg HAL_XSPI_FLAG_SM: XSPI Status match flag + * @arg HAL_XSPI_FLAG_FT: XSPI FIFO threshold flag + * @arg HAL_XSPI_FLAG_TC: XSPI Transfer complete flag + * @arg HAL_XSPI_FLAG_TE: XSPI Transfer error flag + * @retval None + */ +#define HAL_XSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) \ + != 0U) ? SET : RESET) + +/** @brief Clears the specified XSPI's flag status. + * @param __HANDLE__ specifies the XSPI Handle. + * @param __FLAG__ specifies the XSPI clear register flag that needs to be set + * This parameter can be one of the following values: + * @arg HAL_XSPI_FLAG_TO: XSPI Timeout flag + * @arg HAL_XSPI_FLAG_SM: XSPI Status match flag + * @arg HAL_XSPI_FLAG_TC: XSPI Transfer complete flag + * @arg HAL_XSPI_FLAG_TE: XSPI Transfer error flag + * @retval None + */ +#define HAL_XSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup XSPI_Exported_Functions XSPI Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup XSPI_Exported_Functions_Group1 Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_XSPI_Init(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_MspInit(XSPI_HandleTypeDef *hxspi); +HAL_StatusTypeDef HAL_XSPI_DeInit(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_MspDeInit(XSPI_HandleTypeDef *hxspi); + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup XSPI_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* XSPI IRQ handler function */ +void HAL_XSPI_IRQHandler(XSPI_HandleTypeDef *hxspi); + +/* XSPI command configuration functions */ +HAL_StatusTypeDef HAL_XSPI_Command(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *const pCmd, + uint32_t Timeout); +HAL_StatusTypeDef HAL_XSPI_Command_IT(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *const pCmd); +HAL_StatusTypeDef HAL_XSPI_HyperbusCfg(XSPI_HandleTypeDef *hxspi, XSPI_HyperbusCfgTypeDef *const pCfg, + uint32_t Timeout); +HAL_StatusTypeDef HAL_XSPI_HyperbusCmd(XSPI_HandleTypeDef *hxspi, XSPI_HyperbusCmdTypeDef *const pCmd, + uint32_t Timeout); + +/* XSPI indirect mode functions */ +HAL_StatusTypeDef HAL_XSPI_Transmit(XSPI_HandleTypeDef *hxspi, const uint8_t *pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_XSPI_Receive(XSPI_HandleTypeDef *hxspi, uint8_t *const pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_XSPI_Transmit_IT(XSPI_HandleTypeDef *hxspi, const uint8_t *pData); +HAL_StatusTypeDef HAL_XSPI_Receive_IT(XSPI_HandleTypeDef *hxspi, uint8_t *const pData); +HAL_StatusTypeDef HAL_XSPI_Transmit_DMA(XSPI_HandleTypeDef *hxspi, const uint8_t *pData); +HAL_StatusTypeDef HAL_XSPI_Receive_DMA(XSPI_HandleTypeDef *hxspi, uint8_t *const pData); + +/* XSPI status flag polling mode functions */ +HAL_StatusTypeDef HAL_XSPI_AutoPolling(XSPI_HandleTypeDef *hxspi, XSPI_AutoPollingTypeDef *const pCfg, + uint32_t Timeout); +HAL_StatusTypeDef HAL_XSPI_AutoPolling_IT(XSPI_HandleTypeDef *hxspi, XSPI_AutoPollingTypeDef *const pCfg); + +/* XSPI memory-mapped mode functions */ +HAL_StatusTypeDef HAL_XSPI_MemoryMapped(XSPI_HandleTypeDef *hxspi, XSPI_MemoryMappedTypeDef *const pCfg); + +/* Callback functions in non-blocking modes ***********************************/ +void HAL_XSPI_ErrorCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_AbortCpltCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_FifoThresholdCallback(XSPI_HandleTypeDef *hxspi); + +/* XSPI indirect mode Callback functions */ +void HAL_XSPI_CmdCpltCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_RxCpltCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_TxCpltCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_RxHalfCpltCallback(XSPI_HandleTypeDef *hxspi); +void HAL_XSPI_TxHalfCpltCallback(XSPI_HandleTypeDef *hxspi); + +/* XSPI status flag polling mode functions */ +void HAL_XSPI_StatusMatchCallback(XSPI_HandleTypeDef *hxspi); + +/* XSPI memory-mapped mode functions */ +void HAL_XSPI_TimeOutCallback(XSPI_HandleTypeDef *hxspi); + +#if defined(USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +/* XSPI callback registering/unregistering */ +HAL_StatusTypeDef HAL_XSPI_RegisterCallback(XSPI_HandleTypeDef *hxspi, HAL_XSPI_CallbackIDTypeDef CallbackID, + pXSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_XSPI_UnRegisterCallback(XSPI_HandleTypeDef *hxspi, HAL_XSPI_CallbackIDTypeDef CallbackID); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + +/** + * @} + */ + +/* Peripheral Control and State functions ************************************/ +/** @addtogroup XSPI_Exported_Functions_Group3 Peripheral Control and State functions + * @{ + */ +HAL_StatusTypeDef HAL_XSPI_Abort(XSPI_HandleTypeDef *hxspi); +HAL_StatusTypeDef HAL_XSPI_Abort_IT(XSPI_HandleTypeDef *hxspi); +HAL_StatusTypeDef HAL_XSPI_SetFifoThreshold(XSPI_HandleTypeDef *hxspi, uint32_t Threshold); +uint32_t HAL_XSPI_GetFifoThreshold(const XSPI_HandleTypeDef *hxspi); +HAL_StatusTypeDef HAL_XSPI_SetMemoryType(XSPI_HandleTypeDef *hxspi, uint32_t Type); +HAL_StatusTypeDef HAL_XSPI_SetDeviceSize(XSPI_HandleTypeDef *hxspi, uint32_t Size); +HAL_StatusTypeDef HAL_XSPI_SetClockPrescaler(XSPI_HandleTypeDef *hxspi, uint32_t Prescaler); +HAL_StatusTypeDef HAL_XSPI_SetTimeout(XSPI_HandleTypeDef *hxspi, uint32_t Timeout); +uint32_t HAL_XSPI_GetError(const XSPI_HandleTypeDef *hxspi); +uint32_t HAL_XSPI_GetState(const XSPI_HandleTypeDef *hxspi); + +/** + * @} + */ + +/* XSPI IO Manager configuration function ************************************/ +/** @addtogroup XSPI_Exported_Functions_Group4 IO Manager configuration function + * @{ + */ +HAL_StatusTypeDef HAL_XSPIM_Config(XSPI_HandleTypeDef *const hxspi, XSPIM_CfgTypeDef *const pCfg, uint32_t Timeout); + +/** + * @} + */ + +/* XSPI high-speed interface and calibration functions ***********************/ +/** @addtogroup XSPI_Exported_Functions_Group6 High-speed interface and calibration functions + * @{ + */ +HAL_StatusTypeDef HAL_XSPI_GetDelayValue(XSPI_HandleTypeDef *hxspi, XSPI_HSCalTypeDef *const pCfg); +HAL_StatusTypeDef HAL_XSPI_SetDelayValue(XSPI_HandleTypeDef *hxspi, XSPI_HSCalTypeDef *const pCfg); + +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** + @cond 0 + */ +#define IS_XSPI_FIFO_THRESHOLD_BYTE(THRESHOLD) (((THRESHOLD) >= 1U) &&\ + ((THRESHOLD) <= ((XSPI_CR_FTHRES >> XSPI_CR_FTHRES_Pos)+1U))) +#define IS_XSPI_MEMORY_MODE(MODE) (((MODE) == HAL_XSPI_SINGLE_MEM) || \ + ((MODE) == HAL_XSPI_DUAL_MEM)) + +#define IS_XSPI_MEMORY_TYPE(TYPE) (((TYPE) == HAL_XSPI_MEMTYPE_MICRON) || \ + ((TYPE) == HAL_XSPI_MEMTYPE_MACRONIX) || \ + ((TYPE) == HAL_XSPI_MEMTYPE_APMEM) || \ + ((TYPE) == HAL_XSPI_MEMTYPE_MACRONIX_RAM) || \ + ((TYPE) == HAL_XSPI_MEMTYPE_HYPERBUS) || \ + ((TYPE) == HAL_XSPI_MEMTYPE_APMEM_16BITS)) + +#define IS_XSPI_MEMORY_SIZE(SIZE) (((SIZE) == HAL_XSPI_SIZE_16B) || \ + ((SIZE) == HAL_XSPI_SIZE_32B) || \ + ((SIZE) == HAL_XSPI_SIZE_64B) || \ + ((SIZE) == HAL_XSPI_SIZE_128B) || \ + ((SIZE) == HAL_XSPI_SIZE_256B) || \ + ((SIZE) == HAL_XSPI_SIZE_512B) || \ + ((SIZE) == HAL_XSPI_SIZE_1KB) || \ + ((SIZE) == HAL_XSPI_SIZE_2KB) || \ + ((SIZE) == HAL_XSPI_SIZE_4KB) || \ + ((SIZE) == HAL_XSPI_SIZE_8KB) || \ + ((SIZE) == HAL_XSPI_SIZE_16KB) || \ + ((SIZE) == HAL_XSPI_SIZE_32KB) || \ + ((SIZE) == HAL_XSPI_SIZE_64KB) || \ + ((SIZE) == HAL_XSPI_SIZE_128KB) || \ + ((SIZE) == HAL_XSPI_SIZE_256KB) || \ + ((SIZE) == HAL_XSPI_SIZE_512KB) || \ + ((SIZE) == HAL_XSPI_SIZE_1MB) || \ + ((SIZE) == HAL_XSPI_SIZE_2MB) || \ + ((SIZE) == HAL_XSPI_SIZE_4MB) || \ + ((SIZE) == HAL_XSPI_SIZE_8MB) || \ + ((SIZE) == HAL_XSPI_SIZE_16MB) || \ + ((SIZE) == HAL_XSPI_SIZE_32MB) || \ + ((SIZE) == HAL_XSPI_SIZE_64MB) || \ + ((SIZE) == HAL_XSPI_SIZE_128MB) || \ + ((SIZE) == HAL_XSPI_SIZE_256MB) || \ + ((SIZE) == HAL_XSPI_SIZE_512MB) || \ + ((SIZE) == HAL_XSPI_SIZE_1GB) || \ + ((SIZE) == HAL_XSPI_SIZE_2GB) || \ + ((SIZE) == HAL_XSPI_SIZE_4GB) || \ + ((SIZE) == HAL_XSPI_SIZE_8GB) || \ + ((SIZE) == HAL_XSPI_SIZE_16GB) || \ + ((SIZE) == HAL_XSPI_SIZE_32GB)) + +#define IS_XSPI_CS_HIGH_TIME_CYCLE(TIME) (((TIME) >= 1U) && ((TIME) <= 64U)) + +#define IS_XSPI_FREE_RUN_CLK(CLK) (((CLK) == HAL_XSPI_FREERUNCLK_DISABLE) || \ + ((CLK) == HAL_XSPI_FREERUNCLK_ENABLE)) + +#define IS_XSPI_CLOCK_MODE(MODE) (((MODE) == HAL_XSPI_CLOCK_MODE_0) || \ + ((MODE) == HAL_XSPI_CLOCK_MODE_3)) + +#define IS_XSPI_WRAP_SIZE(SIZE) (((SIZE) == HAL_XSPI_WRAP_NOT_SUPPORTED) || \ + ((SIZE) == HAL_XSPI_WRAP_16_BYTES) || \ + ((SIZE) == HAL_XSPI_WRAP_32_BYTES) || \ + ((SIZE) == HAL_XSPI_WRAP_64_BYTES) || \ + ((SIZE) == HAL_XSPI_WRAP_128_BYTES)) + +#define IS_XSPI_CLK_PRESCALER(PRESCALER) ((PRESCALER) <= 255U) + +#define IS_XSPI_SAMPLE_SHIFTING(CYCLE) (((CYCLE) == HAL_XSPI_SAMPLE_SHIFT_NONE) || \ + ((CYCLE) == HAL_XSPI_SAMPLE_SHIFT_HALFCYCLE)) + +#define IS_XSPI_DHQC(CYCLE) (((CYCLE) == HAL_XSPI_DHQC_DISABLE) || \ + ((CYCLE) == HAL_XSPI_DHQC_ENABLE)) + +#define IS_XSPI_CS_BOUND(SIZE) (((SIZE) == HAL_XSPI_BONDARYOF_NONE) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_16B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_32B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_64B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_128B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_256B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_512B) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_1KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_2KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_4KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_8KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_16KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_32KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_64KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_128KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_256KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_512KB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_1MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_2MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_4MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_8MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_16MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_32MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_64MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_128MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_256MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_512MB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_1GB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_2GB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_4GB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_8GB) || \ + ((SIZE) == HAL_XSPI_BONDARYOF_16GB)) + + +#define IS_XSPI_MAXTRAN(NB_BYTES) ((NB_BYTES) <= 255U) + +#define IS_XSPI_CSSEL(CSSEL) (((CSSEL) == HAL_XSPI_CSSEL_NCS1) || \ + ((CSSEL) == HAL_XSPI_CSSEL_NCS2)) + +#define IS_XSPI_OPERATION_TYPE(TYPE) (((TYPE) == HAL_XSPI_OPTYPE_COMMON_CFG) || \ + ((TYPE) == HAL_XSPI_OPTYPE_READ_CFG) || \ + ((TYPE) == HAL_XSPI_OPTYPE_WRITE_CFG) || \ + ((TYPE) == HAL_XSPI_OPTYPE_WRAP_CFG)) + +#define IS_XSPI_IO_SELECT(MEMSEL) (((MEMSEL) == HAL_XSPI_SELECT_IO_3_0) || \ + ((MEMSEL) == HAL_XSPI_SELECT_IO_7_4) || \ + ((MEMSEL) == HAL_XSPI_SELECT_IO_11_8) || \ + ((MEMSEL) == HAL_XSPI_SELECT_IO_15_12) || \ + ((MEMSEL) == HAL_XSPI_SELECT_IO_7_0) || \ + ((MEMSEL) == HAL_XSPI_SELECT_IO_15_8)) + +#define IS_XSPI_INSTRUCTION(OPCODE) ((OPCODE) <= 0xFFFFFFFFU) + +#define IS_XSPI_INSTRUCTION_MODE(MODE) (((MODE) == HAL_XSPI_INSTRUCTION_NONE) || \ + ((MODE) == HAL_XSPI_INSTRUCTION_1_LINE) || \ + ((MODE) == HAL_XSPI_INSTRUCTION_2_LINES) || \ + ((MODE) == HAL_XSPI_INSTRUCTION_4_LINES) || \ + ((MODE) == HAL_XSPI_INSTRUCTION_8_LINES)) + +#define IS_XSPI_INSTRUCTION_WIDTH(WIDTH) (((WIDTH) == HAL_XSPI_INSTRUCTION_8_BITS) || \ + ((WIDTH) == HAL_XSPI_INSTRUCTION_16_BITS) || \ + ((WIDTH) == HAL_XSPI_INSTRUCTION_24_BITS) || \ + ((WIDTH) == HAL_XSPI_INSTRUCTION_32_BITS)) + +#define IS_XSPI_INSTRUCTION_DTR_MODE(MODE) (((MODE) == HAL_XSPI_INSTRUCTION_DTR_DISABLE) || \ + ((MODE) == HAL_XSPI_INSTRUCTION_DTR_ENABLE)) + +#define IS_XSPI_ADDRESS_MODE(MODE) (((MODE) == HAL_XSPI_ADDRESS_NONE) || \ + ((MODE) == HAL_XSPI_ADDRESS_1_LINE) || \ + ((MODE) == HAL_XSPI_ADDRESS_2_LINES) || \ + ((MODE) == HAL_XSPI_ADDRESS_4_LINES) || \ + ((MODE) == HAL_XSPI_ADDRESS_8_LINES)) + +#define IS_XSPI_ADDRESS_WIDTH(WIDTH) (((WIDTH) == HAL_XSPI_ADDRESS_8_BITS) || \ + ((WIDTH) == HAL_XSPI_ADDRESS_16_BITS) || \ + ((WIDTH) == HAL_XSPI_ADDRESS_24_BITS) || \ + ((WIDTH) == HAL_XSPI_ADDRESS_32_BITS)) + +#define IS_XSPI_ADDRESS_DTR_MODE(MODE) (((MODE) == HAL_XSPI_ADDRESS_DTR_DISABLE) || \ + ((MODE) == HAL_XSPI_ADDRESS_DTR_ENABLE)) + +#define IS_XSPI_ALT_BYTES_MODE(MODE) (((MODE) == HAL_XSPI_ALT_BYTES_NONE) || \ + ((MODE) == HAL_XSPI_ALT_BYTES_1_LINE) || \ + ((MODE) == HAL_XSPI_ALT_BYTES_2_LINES) || \ + ((MODE) == HAL_XSPI_ALT_BYTES_4_LINES) || \ + ((MODE) == HAL_XSPI_ALT_BYTES_8_LINES)) + +#define IS_XSPI_ALT_BYTES_WIDTH(WIDTH) (((WIDTH) == HAL_XSPI_ALT_BYTES_8_BITS) || \ + ((WIDTH) == HAL_XSPI_ALT_BYTES_16_BITS) || \ + ((WIDTH) == HAL_XSPI_ALT_BYTES_24_BITS) || \ + ((WIDTH) == HAL_XSPI_ALT_BYTES_32_BITS)) + +#define IS_XSPI_ALT_BYTES_DTR_MODE(MODE) (((MODE) == HAL_XSPI_ALT_BYTES_DTR_DISABLE) || \ + ((MODE) == HAL_XSPI_ALT_BYTES_DTR_ENABLE)) + +#define IS_XSPI_DATA_MODE(TYPE,MODE) (((TYPE) == (HAL_XSPI_MEMTYPE_HYPERBUS)) ? \ + (((MODE) == HAL_XSPI_DATA_NONE) || \ + ((MODE) == HAL_XSPI_DATA_8_LINES) || \ + ((MODE) == HAL_XSPI_DATA_16_LINES)): \ + (((MODE) == HAL_XSPI_DATA_NONE) || \ + ((MODE) == HAL_XSPI_DATA_1_LINE) || \ + ((MODE) == HAL_XSPI_DATA_2_LINES) || \ + ((MODE) == HAL_XSPI_DATA_4_LINES) || \ + ((MODE) == HAL_XSPI_DATA_8_LINES) || \ + ((MODE) == HAL_XSPI_DATA_16_LINES))) +#define IS_XSPI_DATA_LENGTH(NUMBER) ((NUMBER) >= 1U) + +#define IS_XSPI_DATA_DTR_MODE(MODE) (((MODE) == HAL_XSPI_DATA_DTR_DISABLE) || \ + ((MODE) == HAL_XSPI_DATA_DTR_ENABLE)) + +#define IS_XSPI_DUMMY_CYCLES(NUMBER) ((NUMBER) <= 31U) + +#define IS_XSPI_DQS_MODE(MODE) (((MODE) == HAL_XSPI_DQS_DISABLE) || \ + ((MODE) == HAL_XSPI_DQS_ENABLE)) + +#define IS_XSPI_RW_RECOVERY_TIME_CYCLE(CYCLE) ((CYCLE) <= 255U) + +#define IS_XSPI_ACCESS_TIME_CYCLE(CYCLE) ((CYCLE) <= 255U) + +#define IS_XSPI_WRITE_ZERO_LATENCY(MODE) (((MODE) == HAL_XSPI_LATENCY_ON_WRITE) || \ + ((MODE) == HAL_XSPI_NO_LATENCY_ON_WRITE)) + +#define IS_XSPI_LATENCY_MODE(MODE) (((MODE) == HAL_XSPI_VARIABLE_LATENCY) || \ + ((MODE) == HAL_XSPI_FIXED_LATENCY)) + +#define IS_XSPI_ADDRESS_SPACE(SPACE) (((SPACE) == HAL_XSPI_MEMORY_ADDRESS_SPACE) || \ + ((SPACE) == HAL_XSPI_REGISTER_ADDRESS_SPACE)) + +#define IS_XSPI_MATCH_MODE(MODE) (((MODE) == HAL_XSPI_MATCH_MODE_AND) || \ + ((MODE) == HAL_XSPI_MATCH_MODE_OR)) + +#define IS_XSPI_AUTOMATIC_STOP(MODE) (((MODE) == HAL_XSPI_AUTOMATIC_STOP_ENABLE) || \ + ((MODE) == HAL_XSPI_AUTOMATIC_STOP_DISABLE)) + +#define IS_XSPI_INTERVAL(INTERVAL) ((INTERVAL) <= 0xFFFFU) + +#define IS_XSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U)) + +#define IS_XSPI_TIMEOUT_ACTIVATION(MODE) (((MODE) == HAL_XSPI_TIMEOUT_COUNTER_DISABLE) || \ + ((MODE) == HAL_XSPI_TIMEOUT_COUNTER_ENABLE)) + +#define IS_XSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU) + +#define IS_XSPIM_IO_PORT(PORT) (((PORT) == HAL_XSPIM_IOPORT_1) || \ + ((PORT) == HAL_XSPIM_IOPORT_2)) + +#define IS_XSPIM_NCS_OVR(PORT) (((PORT) == HAL_XSPI_CSSEL_OVR_DISABLED) || \ + ((PORT) == HAL_XSPI_CSSEL_OVR_NCS1) || \ + ((PORT) == HAL_XSPI_CSSEL_OVR_NCS2)) + +#define IS_XSPIM_REQ2ACKTIME(TIME) (((TIME) >= 1U) && ((TIME) <= 256U)) + +#define IS_XSPI_DELAY_TYPE(TYPE) (((TYPE) == HAL_XSPI_CAL_FULL_CYCLE_DELAY) || \ + ((TYPE) == HAL_XSPI_CAL_FEEDBACK_CLK_DELAY) || \ + ((TYPE) == HAL_XSPI_CAL_DATA_OUTPUT_DELAY) || \ + ((TYPE) == HAL_XSPI_CAL_DQS_INPUT_DELAY)) + +#define IS_XSPI_FINECAL_VALUE(VALUE) ((VALUE) <= 0x7FU) + +#define IS_XSPI_COARSECAL_VALUE(VALUE) ((VALUE) <= 0x1FU) + +/** + @endcond + */ + +/* End of private macros -----------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* XSPI || XSPI1 || XSPI2 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_XSPI_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_adc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_adc.h new file mode 100644 index 000000000..098bb7975 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_adc.h @@ -0,0 +1,8263 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_adc.h + * @author MCD Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_ADC_H +#define STM32H7RSxx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (ADC1) || defined (ADC2) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer register offset */ +/* - sequencer rank bits position into the selected register */ + +/* Internal register offset for ADC group regular sequencer configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_SQR1_REGOFFSET (0x00000000UL) +#define ADC_SQR2_REGOFFSET (0x00000100UL) +#define ADC_SQR3_REGOFFSET (0x00000200UL) +#define ADC_SQR4_REGOFFSET (0x00000300UL) + +#define ADC_REG_SQRX_REGOFFSET_MASK (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET \ + | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET) +#define ADC_SQRX_REGOFFSET_POS (8UL) /* Position of bits ADC_SQRx_REGOFFSET in ADC_REG_SQRX_REGOFFSET_MASK*/ +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS (ADC_SQR1_SQ1_Pos) +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS (ADC_SQR1_SQ2_Pos) +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS (ADC_SQR1_SQ3_Pos) +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (ADC_SQR1_SQ4_Pos) +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (ADC_SQR2_SQ5_Pos) +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (ADC_SQR2_SQ6_Pos) +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (ADC_SQR2_SQ7_Pos) +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (ADC_SQR2_SQ8_Pos) +#define ADC_REG_RANK_9_SQRX_BITOFFSET_POS (ADC_SQR2_SQ9_Pos) +#define ADC_REG_RANK_10_SQRX_BITOFFSET_POS (ADC_SQR3_SQ10_Pos) +#define ADC_REG_RANK_11_SQRX_BITOFFSET_POS (ADC_SQR3_SQ11_Pos) +#define ADC_REG_RANK_12_SQRX_BITOFFSET_POS (ADC_SQR3_SQ12_Pos) +#define ADC_REG_RANK_13_SQRX_BITOFFSET_POS (ADC_SQR3_SQ13_Pos) +#define ADC_REG_RANK_14_SQRX_BITOFFSET_POS (ADC_SQR3_SQ14_Pos) +#define ADC_REG_RANK_15_SQRX_BITOFFSET_POS (ADC_SQR4_SQ15_Pos) +#define ADC_REG_RANK_16_SQRX_BITOFFSET_POS (ADC_SQR4_SQ16_Pos) + + + +/* Internal mask for ADC group injected sequencer: */ +/* To select into literal LL_ADC_INJ_RANK_x the relevant bits for: */ +/* - data register offset */ +/* - sequencer rank bits position into the selected register */ + +/* Internal register offset for ADC group injected data register */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_JDR1_REGOFFSET (0x00000000UL) +#define ADC_JDR2_REGOFFSET (0x00000100UL) +#define ADC_JDR3_REGOFFSET (0x00000200UL) +#define ADC_JDR4_REGOFFSET (0x00000300UL) + +#define ADC_INJ_JDRX_REGOFFSET_MASK (ADC_JDR1_REGOFFSET | ADC_JDR2_REGOFFSET \ + | ADC_JDR3_REGOFFSET | ADC_JDR4_REGOFFSET) +#define ADC_INJ_RANK_ID_JSQR_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) +#define ADC_JDRX_REGOFFSET_POS (8UL) /* Position of bits ADC_JDRx_REGOFFSET in ADC_INJ_JDRX_REGOFFSET_MASK*/ + +/* Definition of ADC group injected sequencer bits information to be inserted */ +/* into ADC group injected sequencer ranks literals definition. */ +#define ADC_INJ_RANK_1_JSQR_BITOFFSET_POS (ADC_JSQR_JSQ1_Pos) +#define ADC_INJ_RANK_2_JSQR_BITOFFSET_POS (ADC_JSQR_JSQ2_Pos) +#define ADC_INJ_RANK_3_JSQR_BITOFFSET_POS (ADC_JSQR_JSQ3_Pos) +#define ADC_INJ_RANK_4_JSQR_BITOFFSET_POS (ADC_JSQR_JSQ4_Pos) + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR_EXTEN_0) /* Trigger edge set to rising edge (default setting for + compatibility with some ADC on other STM32 series + having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTSEL) << (4U * 0UL)) | \ + ((ADC_CFGR_EXTSEL) << (4U * 1UL)) | \ + ((ADC_CFGR_EXTSEL) << (4U * 2UL)) | \ + ((ADC_CFGR_EXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN) << (4U * 0UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS (ADC_CFGR_EXTSEL_Pos) +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (ADC_CFGR_EXTEN_Pos) + + + +/* Internal mask for ADC group injected trigger: */ +/* To select into literal LL_ADC_INJ_TRIG_x the relevant bits for: */ +/* - injected trigger source */ +/* - injected trigger edge */ +#define ADC_INJ_TRIG_EXT_EDGE_DEFAULT (ADC_JSQR_JEXTEN_0) /* Trigger edge set to rising edge (default setting for + compatibility with some ADC on other STM32 series + having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_INJ_TRIG_SOURCE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTSEL) << (4U * 0UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 1UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 2UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_INJ_TRIG_EDGE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTEN) << (4U * 0UL)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_INJ_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group injected trigger bits information. */ +#define ADC_INJ_TRIG_EXTSEL_BITOFFSET_POS (ADC_JSQR_JEXTSEL_Pos) +#define ADC_INJ_TRIG_EXTEN_BITOFFSET_POS (ADC_JSQR_JEXTEN_Pos) + + + + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel identifier defined by bitfield */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +/* - channel sampling time defined by SMPRx register offset */ +/* and SMPx bits positions into SMPRx register */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR_AWD1CH) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (ADC_CFGR_AWD1CH_Pos) +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK \ + | ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (ADC_SQR2_SQ5) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK + >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_2 (0x00080000UL) /* Marker of internal channel for other ADC instances, in case + of different ADC internal channels mapped on same channel + number on different ADC instances */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH | ADC_CHANNEL_ID_INTERNAL_CH_2) + +/* Internal register offset for ADC channel sampling time configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_SMPR1_REGOFFSET (0x00000000UL) +#define ADC_SMPR2_REGOFFSET (0x02000000UL) +#define ADC_CHANNEL_SMPRX_REGOFFSET_MASK (ADC_SMPR1_REGOFFSET | ADC_SMPR2_REGOFFSET) +#define ADC_SMPRX_REGOFFSET_POS (25UL) /* Position of bits ADC_SMPRx_REGOFFSET + in ADC_CHANNEL_SMPRX_REGOFFSET_MASK */ + +#define ADC_CHANNEL_SMPx_BITOFFSET_MASK (0x01F00000UL) +#define ADC_CHANNEL_SMPx_BITOFFSET_POS (20UL) /* Equivalent to bitfield "ADC_CHANNEL_SMPx_BITOFFSET_MASK" + position in register */ + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER (0x00000000UL) +#define ADC_CHANNEL_1_NUMBER (ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_2_NUMBER (ADC_CFGR_AWD1CH_1) +#define ADC_CHANNEL_3_NUMBER (ADC_CFGR_AWD1CH_1 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_4_NUMBER (ADC_CFGR_AWD1CH_2) +#define ADC_CHANNEL_5_NUMBER (ADC_CFGR_AWD1CH_2 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_6_NUMBER (ADC_CFGR_AWD1CH_2 | ADC_CFGR_AWD1CH_1) +#define ADC_CHANNEL_7_NUMBER (ADC_CFGR_AWD1CH_2 | ADC_CFGR_AWD1CH_1 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_8_NUMBER (ADC_CFGR_AWD1CH_3) +#define ADC_CHANNEL_9_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_10_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_1) +#define ADC_CHANNEL_11_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_1 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_12_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_2) +#define ADC_CHANNEL_13_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_2 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_14_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_2 | ADC_CFGR_AWD1CH_1) +#define ADC_CHANNEL_15_NUMBER (ADC_CFGR_AWD1CH_3 | ADC_CFGR_AWD1CH_2 | \ + ADC_CFGR_AWD1CH_1 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CFGR_AWD1CH_4) +#define ADC_CHANNEL_17_NUMBER (ADC_CFGR_AWD1CH_4 | ADC_CFGR_AWD1CH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CFGR_AWD1CH_4 | ADC_CFGR_AWD1CH_1) + +/* Definition of channels ID bitfield information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_BITFIELD (ADC_AWD2CR_AWD2CH_0) +#define ADC_CHANNEL_1_BITFIELD (ADC_AWD2CR_AWD2CH_1) +#define ADC_CHANNEL_2_BITFIELD (ADC_AWD2CR_AWD2CH_2) +#define ADC_CHANNEL_3_BITFIELD (ADC_AWD2CR_AWD2CH_3) +#define ADC_CHANNEL_4_BITFIELD (ADC_AWD2CR_AWD2CH_4) +#define ADC_CHANNEL_5_BITFIELD (ADC_AWD2CR_AWD2CH_5) +#define ADC_CHANNEL_6_BITFIELD (ADC_AWD2CR_AWD2CH_6) +#define ADC_CHANNEL_7_BITFIELD (ADC_AWD2CR_AWD2CH_7) +#define ADC_CHANNEL_8_BITFIELD (ADC_AWD2CR_AWD2CH_8) +#define ADC_CHANNEL_9_BITFIELD (ADC_AWD2CR_AWD2CH_9) +#define ADC_CHANNEL_10_BITFIELD (ADC_AWD2CR_AWD2CH_10) +#define ADC_CHANNEL_11_BITFIELD (ADC_AWD2CR_AWD2CH_11) +#define ADC_CHANNEL_12_BITFIELD (ADC_AWD2CR_AWD2CH_12) +#define ADC_CHANNEL_13_BITFIELD (ADC_AWD2CR_AWD2CH_13) +#define ADC_CHANNEL_14_BITFIELD (ADC_AWD2CR_AWD2CH_14) +#define ADC_CHANNEL_15_BITFIELD (ADC_AWD2CR_AWD2CH_15) +#define ADC_CHANNEL_16_BITFIELD (ADC_AWD2CR_AWD2CH_16) +#define ADC_CHANNEL_17_BITFIELD (ADC_AWD2CR_AWD2CH_17) +#define ADC_CHANNEL_18_BITFIELD (ADC_AWD2CR_AWD2CH_18) + +/* Definition of channels sampling time information to be inserted into */ +/* channels literals definition. */ +/* Value shifted are equivalent to bitfield "ADC_SMPRx_SMPy" position */ +/* in register. */ +#define ADC_CHANNEL_0_SMP (ADC_SMPR1_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_1_SMP (ADC_SMPR1_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_2_SMP (ADC_SMPR1_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_3_SMP (ADC_SMPR1_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_4_SMP (ADC_SMPR1_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_5_SMP (ADC_SMPR1_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_6_SMP (ADC_SMPR1_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_7_SMP (ADC_SMPR1_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_8_SMP (ADC_SMPR1_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_9_SMP (ADC_SMPR1_REGOFFSET | ((27UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_10_SMP (ADC_SMPR2_REGOFFSET | (( 0UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_11_SMP (ADC_SMPR2_REGOFFSET | (( 3UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_12_SMP (ADC_SMPR2_REGOFFSET | (( 6UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_13_SMP (ADC_SMPR2_REGOFFSET | (( 9UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_14_SMP (ADC_SMPR2_REGOFFSET | ((12UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_15_SMP (ADC_SMPR2_REGOFFSET | ((15UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_16_SMP (ADC_SMPR2_REGOFFSET | ((18UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_17_SMP (ADC_SMPR2_REGOFFSET | ((21UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) +#define ADC_CHANNEL_18_SMP (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) + + +/* Internal mask for ADC mode single or differential ended: */ +/* To select into literals LL_ADC_SINGLE_ENDED or LL_ADC_SINGLE_DIFFERENTIAL */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in different registers) */ +/* - ADC calibration: calibration start, calibration factor get or set */ +/* - ADC channels: set each ADC channel ending mode */ +#define ADC_SINGLEDIFF_CALIB_START_MASK (ADC_CR_ADCALDIF) +#define ADC_SINGLEDIFF_CALIB_FACTOR_MASK (ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S) +#define ADC_SINGLEDIFF_CHANNEL_MASK (ADC_CHANNEL_ID_BITFIELD_MASK) /* Equivalent to ADC_DIFSEL_DIFSEL */ +#define ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK (ADC_CALFACT_CALFACT_S_4 | ADC_CALFACT_CALFACT_S_3) /* Bits chosen + to perform of shift when single mode is selected, shift value out of + channels bits range. */ +#define ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK (0x00010000UL) /* Selection of 1 bit to discriminate differential mode: + mask of bit */ +#define ADC_SINGLEDIFF_CALIB_F_BIT_D_POS (16UL) /* Selection of 1 bit to discriminate differential mode: + position of bit */ +#define ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4 (ADC_SINGLEDIFF_CALIB_F_BIT_D_POS - 4UL) /* Shift of bit + ADC_SINGLEDIFF_CALIB_F_BIT_D to perform a shift of 4 ranks */ + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 series)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC groups regular and-or injected). */ +/* - analog watchdog 2 and 3: monitored channel defined by bitfield, no */ +/* selection on groups. */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET (0x00000000UL) +#define ADC_AWD_CR2_REGOFFSET (0x00100000UL) +#define ADC_AWD_CR3_REGOFFSET (0x00200000UL) + +/* Register offset gap between AWD1 and AWD2-AWD3 configuration registers */ +/* (Set separately as ADC_AWD_CRX_REGOFFSET to spare 32 bits space */ +#define ADC_AWD_CR12_REGOFFSETGAP_MASK (ADC_AWD2CR_AWD2CH_0) +#define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR_AWD1CH | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) +#define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) + +#define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET + in ADC_AWD_CRX_REGOFFSET_MASK */ + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET) +#define ADC_AWD_TR2_REGOFFSET (ADC_AWD_CR2_REGOFFSET) +#define ADC_AWD_TR3_REGOFFSET (ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_POS (ADC_AWD_CRX_REGOFFSET_POS) /* Position of bits ADC_SQRx_REGOFFSET + in ADC_AWD_TRX_REGOFFSET_MASK */ +#define ADC_AWD_TRX_BIT_HIGH_MASK (0x00010000UL) /* Selection of 1 bit to discriminate + threshold high: mask of bit */ +#define ADC_AWD_TRX_BIT_HIGH_POS (16UL) /* Selection of 1 bit to discriminate + threshold high: position of bit */ +#define ADC_AWD_TRX_BIT_HIGH_SHIFT4 (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to + position to perform a shift of 4 ranks */ + +/* Internal mask for ADC offset: */ +/* Internal register offset for ADC offset instance configuration */ +#define ADC_OFR1_REGOFFSET (0x00000000UL) +#define ADC_OFR2_REGOFFSET (0x00000001UL) +#define ADC_OFR3_REGOFFSET (0x00000002UL) +#define ADC_OFR4_REGOFFSET (0x00000003UL) +#define ADC_OFRx_REGOFFSET_MASK (ADC_OFR1_REGOFFSET | ADC_OFR2_REGOFFSET \ + | ADC_OFR3_REGOFFSET | ADC_OFR4_REGOFFSET) + + +/* ADC registers bits positions */ +#define ADC_CFGR_RES_BITOFFSET_POS (ADC_CFGR_RES_Pos) +#define ADC_CFGR_AWD1SGL_BITOFFSET_POS (ADC_CFGR_AWD1SGL_Pos) +#define ADC_CFGR_AWD1EN_BITOFFSET_POS (ADC_CFGR_AWD1EN_Pos) +#define ADC_CFGR_JAWD1EN_BITOFFSET_POS (ADC_CFGR_JAWD1EN_Pos) +#define ADC_TR1_HT1_BITOFFSET_POS (ADC_TR1_HT1_Pos) + + +/* ADC registers bits groups */ +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADEN | ADC_CR_ADDIS \ + | ADC_CR_JADSTART | ADC_CR_JADSTP \ + | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with + HW property "rs": Software can read as well as set this bit. + Writing '0' has no effect on the bit value. */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FF1E810UL)) /* Internal voltage reference, address of + parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC + (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF (3300UL) /* Analog voltage reference (Vref+) value + with which VrefInt has been calibrated in production + (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FF1E814UL)) /* Address of parameter TS_CAL1: On STM32H7RS, + temperature sensor ADC raw data acquired at temperature 30 DegC + (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FF1E818UL)) /* Address of parameter TS_CAL2: On STM32H7RS, + temperature sensor ADC raw data acquired at temperature 130 DegC + (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (30L) /* Temperature at which temperature sensor + has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR + (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL2_TEMP (130L) /* Temperature at which temperature sensor + has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR + (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG (3300UL) /* Analog voltage reference (Vref+) value + with which temperature sensor has been calibrated in production + (tolerance +-10 mV) (unit: mV). */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + @note On this STM32 series, if ADC group injected is used, some clock ratio + constraints between ADC clock and AHB clock must be respected. + Refer to reference manual. + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetCommonClock(). */ + +#if defined(ADC_MULTIMODE_SUPPORT) + uint32_t Multimode; /*!< Set ADC multimode configuration to operate in independent mode or multimode + (for devices with several ADC instances). + This parameter can be a value of @ref ADC_LL_EC_MULTI_MODE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetMultimode(). */ + + uint32_t MultiDMATransfer; /*!< Set ADC multimode conversion data transfer: no transfer or transfer by DMA. + This parameter can be a value of @ref ADC_LL_EC_MULTI_DMA_TRANSFER + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetMultiDMATransfer(). */ + + uint32_t MultiTwoSamplingDelay; /*!< Set ADC multimode delay between 2 sampling phases. + This parameter can be a value of @ref ADC_LL_EC_MULTI_TWOSMP_DELAY + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetMultiTwoSamplingDelay(). */ +#endif /* ADC_MULTIMODE_SUPPORT */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Affects both group regular and group injected (availability + * of ADC group injected depends on STM32 series). + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a value of @ref ADC_LL_EC_LP_MODE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetLowPowerMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or + from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also + set trigger polarity to rising edge(default setting for compatibility + with some ADC on other STM32 series having this setting set by HW + default value). + In case of need to modify trigger edge, use function + @ref LL_ADC_REG_SetTriggerEdge(). + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided + and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is + enabled (scan length of 2 ranks or more). + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC + conversions are performed in single mode (one conversion per trigger) or in + continuous mode (after the first trigger, following conversions launched + successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode + and discontinuous mode. + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer + by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetDMATransfer(). */ + + uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun: + data preserved or overwritten. + This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR + This feature can be modified afterwards using unitary function + @ref LL_ADC_REG_SetOverrun(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group injected. + * @note These parameters have an impact on ADC scope: ADC group injected. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "INJ"). + * @note The setting of these parameters by function @ref LL_ADC_INJ_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group injected conversion trigger source: internal (SW start) + or from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also + set trigger polarity to rising edge (default setting for + compatibility with some ADC on other STM32 series having this + setting set by HW default value). + In case of need to modify trigger edge, use function + @ref LL_ADC_INJ_SetTriggerEdge(). + This feature can be modified afterwards using unitary function + @ref LL_ADC_INJ_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group injected sequencer length. + This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_SCAN_LENGTH + This feature can be modified afterwards using unitary function + @ref LL_ADC_INJ_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group injected sequencer discontinuous mode: sequence subdivided + and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_INJ_SEQ_DISCONT_MODE + @note This parameter has an effect only if group injected sequencer is + enabled (scan length of 2 ranks or more). + This feature can be modified afterwards using unitary function + @ref LL_ADC_INJ_SetSequencerDiscont(). */ + + uint32_t TrigAuto; /*!< Set ADC group injected conversion trigger: independent or from ADC group + regular. + This parameter can be a value of @ref ADC_LL_EC_INJ_TRIG_AUTO + Note: This parameter must be set to set to independent trigger if injected + trigger source is set to an external trigger. + This feature can be modified afterwards using unitary function + @ref LL_ADC_INJ_SetTrigAuto(). */ + +} LL_ADC_INJ_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary + conversion */ +#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence + conversions */ +#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */ +#define LL_ADC_FLAG_JEOC ADC_ISR_JEOC /*!< ADC flag ADC group injected end of unitary + conversion */ +#define LL_ADC_FLAG_JEOS ADC_ISR_JEOS /*!< ADC flag ADC group injected end of sequence + conversions */ +#define LL_ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC flag ADC group injected contexts queue + overflow */ +#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ +#define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ +#define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define LL_ADC_FLAG_ADRDY_MST ADC_CSR_ADRDY_MST /*!< ADC flag ADC multimode master instance ready */ +#define LL_ADC_FLAG_ADRDY_SLV ADC_CSR_ADRDY_SLV /*!< ADC flag ADC multimode slave instance ready */ +#define LL_ADC_FLAG_EOC_MST ADC_CSR_EOC_MST /*!< ADC flag ADC multimode master group regular end of + unitary conversion */ +#define LL_ADC_FLAG_EOC_SLV ADC_CSR_EOC_SLV /*!< ADC flag ADC multimode slave group regular end of + unitary conversion */ +#define LL_ADC_FLAG_EOS_MST ADC_CSR_EOS_MST /*!< ADC flag ADC multimode master group regular end of + sequence conversions */ +#define LL_ADC_FLAG_EOS_SLV ADC_CSR_EOS_SLV /*!< ADC flag ADC multimode slave group regular end of + sequence conversions */ +#define LL_ADC_FLAG_OVR_MST ADC_CSR_OVR_MST /*!< ADC flag ADC multimode master group regular + overrun */ +#define LL_ADC_FLAG_OVR_SLV ADC_CSR_OVR_SLV /*!< ADC flag ADC multimode slave group regular + overrun */ +#define LL_ADC_FLAG_EOSMP_MST ADC_CSR_EOSMP_MST /*!< ADC flag ADC multimode master group regular end of + sampling phase */ +#define LL_ADC_FLAG_EOSMP_SLV ADC_CSR_EOSMP_SLV /*!< ADC flag ADC multimode slave group regular end of + sampling phase */ +#define LL_ADC_FLAG_JEOC_MST ADC_CSR_JEOC_MST /*!< ADC flag ADC multimode master group injected end of + unitary conversion */ +#define LL_ADC_FLAG_JEOC_SLV ADC_CSR_JEOC_SLV /*!< ADC flag ADC multimode slave group injected end of + unitary conversion */ +#define LL_ADC_FLAG_JEOS_MST ADC_CSR_JEOS_MST /*!< ADC flag ADC multimode master group injected end of + sequence conversions */ +#define LL_ADC_FLAG_JEOS_SLV ADC_CSR_JEOS_SLV /*!< ADC flag ADC multimode slave group injected end of + sequence conversions */ +#define LL_ADC_FLAG_JQOVF_MST ADC_CSR_JQOVF_MST /*!< ADC flag ADC multimode master group injected + contexts queue overflow */ +#define LL_ADC_FLAG_JQOVF_SLV ADC_CSR_JQOVF_SLV /*!< ADC flag ADC multimode slave group injected + contexts queue overflow */ +#define LL_ADC_FLAG_AWD1_MST ADC_CSR_AWD1_MST /*!< ADC flag ADC multimode master analog watchdog 1 + of the ADC master */ +#define LL_ADC_FLAG_AWD1_SLV ADC_CSR_AWD1_SLV /*!< ADC flag ADC multimode slave analog watchdog 1 + of the ADC slave */ +#define LL_ADC_FLAG_AWD2_MST ADC_CSR_AWD2_MST /*!< ADC flag ADC multimode master analog watchdog 2 + of the ADC master */ +#define LL_ADC_FLAG_AWD2_SLV ADC_CSR_AWD2_SLV /*!< ADC flag ADC multimode slave analog watchdog 2 + of the ADC slave */ +#define LL_ADC_FLAG_AWD3_MST ADC_CSR_AWD3_MST /*!< ADC flag ADC multimode master analog watchdog 3 + of the ADC master */ +#define LL_ADC_FLAG_AWD3_SLV ADC_CSR_AWD3_SLV /*!< ADC flag ADC multimode slave analog watchdog 3 + of the ADC slave */ +#endif /* ADC_MULTIMODE_SUPPORT */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary + conversion */ +#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence + conversions */ +#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling + phase */ +#define LL_ADC_IT_JEOC ADC_IER_JEOCIE /*!< ADC interruption ADC group injected end of unitary + conversion */ +#define LL_ADC_IT_JEOS ADC_IER_JEOSIE /*!< ADC interruption ADC group injected end of sequence + conversions */ +#define LL_ADC_IT_JQOVF ADC_IER_JQOVFIE /*!< ADC interruption ADC group injected contexts queue + overflow */ +#define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ +#define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ +#define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000UL) /* ADC group regular conversion data register + (corresponding to register DR) to be used with ADC configured in independent + mode. Without DMA transfer, register accessed by LL function + @ref LL_ADC_REG_ReadConversionData32() and other + functions @ref LL_ADC_REG_ReadConversionDatax() */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define LL_ADC_DMA_REG_REGULAR_DATA_MULTI (0x00000001UL) /* ADC group regular conversion data register + (corresponding to register CDR) to be used with ADC configured in multimode + (available on STM32 devices with several ADC instances). + Without DMA transfer, register accessed by LL function + @ref LL_ADC_REG_ReadMultiConversionData32() */ +#endif /* ADC_MULTIMODE_SUPPORT */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CCR_CKMODE_0) /*!< ADC synchronous clock derived from + AHB clock without prescaler */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CCR_CKMODE_1) /*!< ADC synchronous clock derived from + AHB clock with prescaler division by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CCR_CKMODE_1 | ADC_CCR_CKMODE_0) /*!< ADC synchronous clock derived from + AHB clock with prescaler division by 4 */ +#define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without + prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 2 */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 4 */ +#define LL_ADC_CLOCK_ASYNC_DIV6 (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 6 */ +#define LL_ADC_CLOCK_ASYNC_DIV8 (ADC_CCR_PRESC_2) /*!< ADC asynchronous clock with + prescaler division by 8 */ +#define LL_ADC_CLOCK_ASYNC_DIV10 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 10 */ +#define LL_ADC_CLOCK_ASYNC_DIV12 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 12 */ +#define LL_ADC_CLOCK_ASYNC_DIV16 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 \ + | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 16 */ +#define LL_ADC_CLOCK_ASYNC_DIV32 (ADC_CCR_PRESC_3) /*!< ADC asynchronous clock with + prescaler division by 32 */ +#define LL_ADC_CLOCK_ASYNC_DIV64 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 64 */ +#define LL_ADC_CLOCK_ASYNC_DIV128 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with + prescaler division by 128 */ +#define LL_ADC_CLOCK_ASYNC_DIV256 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 \ + | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with + prescaler division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel + temperature sensor */ +#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_PATH_INTERNAL ADC instance - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_VDDCORE (ADC_OR_OP0) /*!< ADC measurement path to internal channel VddCore */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B (0x00000000UL) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CFGR_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CFGR_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CFGR_RES_1 | ADC_CFGR_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned + (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR_ALIGN) /*!< ADC conversion data alignment: left aligned + (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode + * @{ + */ +#define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR_AUTDLY) /*!< ADC low power mode auto delay: Dynamic low power + mode, ADC conversions are performed only when necessary + (when previous ADC conversion data is read). + See description with function @ref LL_ADC_SetLowPowerMode(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OFFSET_NB ADC instance - Offset instance + * @{ + */ +#define LL_ADC_OFFSET_1 ADC_OFR1_REGOFFSET /*!< ADC offset instance 1: ADC channel and offset level + to which the offset programmed will be applied (independently of channel + mapped on ADC group regular or injected) */ +#define LL_ADC_OFFSET_2 ADC_OFR2_REGOFFSET /*!< ADC offset instance 2: ADC channel and offset level + to which the offset programmed will be applied (independently of channel + mapped on ADC group regular or injected) */ +#define LL_ADC_OFFSET_3 ADC_OFR3_REGOFFSET /*!< ADC offset instance 3: ADC channel and offset level + to which the offset programmed will be applied (independently of channel + mapped on ADC group regular or injected) */ +#define LL_ADC_OFFSET_4 ADC_OFR4_REGOFFSET /*!< ADC offset instance 4: ADC channel and offset level + to which the offset programmed will be applied (independently of channel + mapped on ADC group regular or injected) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OFFSET_STATE ADC instance - Offset state + * @{ + */ +#define LL_ADC_OFFSET_DISABLE (0x00000000UL) /*!< ADC offset disabled + (setting offset instance wise) */ +#define LL_ADC_OFFSET_ENABLE (ADC_OFR1_OFFSET1_EN) /*!< ADC offset enabled + (setting offset instance wise) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OFFSET_SIGN ADC instance - Offset sign + * @{ + */ +#define LL_ADC_OFFSET_SIGN_NEGATIVE (0x00000000UL) /*!< ADC offset is negative */ +#define LL_ADC_OFFSET_SIGN_POSITIVE (ADC_OFR1_OFFSETPOS) /*!< ADC offset is positive */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OFFSET_SATURATION ADC instance - Offset saturation mode + * @{ + */ +#define LL_ADC_OFFSET_SATURATION_DISABLE (0x00000000UL) /*!< ADC offset saturation is disabled (among ADC + selected offset instance 1, 2, 3 or 4) */ +#define LL_ADC_OFFSET_SATURATION_ENABLE (ADC_OFR1_SATEN) /*!< ADC offset saturation is enabled (among ADC + selected offset instance 1, 2, 3 or 4) */ +/** + * @} + */ +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +#define LL_ADC_GROUP_INJECTED (0x00000002UL) /*!< ADC group injected (not available on all STM32 + devices)*/ +#define LL_ADC_GROUP_REGULAR_INJECTED (0x00000003UL) /*!< ADC both groups regular and injected */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_SMP \ + | ADC_CHANNEL_0_BITFIELD) /*!< ADC channel ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_SMP \ + | ADC_CHANNEL_1_BITFIELD) /*!< ADC channel ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_SMP \ + | ADC_CHANNEL_2_BITFIELD) /*!< ADC channel ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_SMP \ + | ADC_CHANNEL_3_BITFIELD) /*!< ADC channel ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_SMP \ + | ADC_CHANNEL_4_BITFIELD) /*!< ADC channel ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_SMP \ + | ADC_CHANNEL_5_BITFIELD) /*!< ADC channel ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_SMP \ + | ADC_CHANNEL_6_BITFIELD) /*!< ADC channel ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_SMP \ + | ADC_CHANNEL_7_BITFIELD) /*!< ADC channel ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_SMP \ + | ADC_CHANNEL_8_BITFIELD) /*!< ADC channel ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_SMP \ + | ADC_CHANNEL_9_BITFIELD) /*!< ADC channel ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_SMP \ + | ADC_CHANNEL_10_BITFIELD) /*!< ADC channel ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_SMP \ + | ADC_CHANNEL_11_BITFIELD) /*!< ADC channel ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_SMP \ + | ADC_CHANNEL_12_BITFIELD) /*!< ADC channel ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_SMP \ + | ADC_CHANNEL_13_BITFIELD) /*!< ADC channel ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_SMP \ + | ADC_CHANNEL_14_BITFIELD) /*!< ADC channel ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_SMP \ + | ADC_CHANNEL_15_BITFIELD) /*!< ADC channel ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_SMP \ + | ADC_CHANNEL_16_BITFIELD) /*!< ADC channel ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_SMP \ + | ADC_CHANNEL_17_BITFIELD) /*!< ADC channel ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_SMP \ + | ADC_CHANNEL_18_BITFIELD) /*!< ADC channel ADCx_IN18 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel + connected to VrefInt: Internal voltage reference, channel specific to ADC1.*/ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel + connected to internal temperature sensor, channel specific to ADC1.*/ +#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel + connected to Vbat/4: Vbat voltage through a divider ladder of factor 1/4 + to have channel voltage always below Vdda, channel specific to ADC2. */ +#define LL_ADC_CHANNEL_VDDCORE (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH_2) /*!< ADC internal channel + connected to Vcore, channel specific to ADC2. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular + conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH1 (ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH2 (ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 channel 2 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH3 (ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 channel 3 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH2 (ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM2 channel 2 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CFGR_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM3 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM4_CH4 (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM4 channel 4 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: external interrupt line 11 + event. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM12_TRGO (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 \ + | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM12 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM9_TRGO (ADC_CFGR_EXTSEL_3 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM8 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM1 TRGO2 event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 \ + | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM2 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM4 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 \ + | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM6 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 \ + | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM15 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_CH4 (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 \ + | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: TIM3 channel 4 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_LPTIM1_CH1 (ADC_CFGR_EXTSEL_4 | ADC_CFGR_EXTSEL_1 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: LPTIM1 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_LPTIM2_CH1 (ADC_CFGR_EXTSEL_4 | ADC_CFGR_EXTSEL_1 \ + | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: LPTIM2 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_REG_TRIG_EXT_LPTIM3_CH1 (ADC_CFGR_EXTSEL_4 | ADC_CFGR_EXTSEL_2 \ + | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular + conversion trigger from external peripheral: LPTIM3 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING (ADC_CFGR_EXTEN_0) /*!< ADC group regular conversion + trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR_EXTEN_1) /*!< ADC group regular conversion + trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR_EXTEN_1 | ADC_CFGR_EXTEN_0) /*!< ADC group regular conversion + trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SAMPLING_MODE ADC group regular - Sampling mode + * @{ + */ +#define LL_ADC_REG_SAMPLING_MODE_NORMAL (0x00000000UL) /*!< ADC conversions sampling phase duration + is defined using @ref ADC_LL_EC_CHANNEL_SAMPLINGTIME */ +#define LL_ADC_REG_SAMPLING_MODE_BULB (ADC_CFGR2_BULB) /*!< ADC conversions sampling phase starts + immediately after end of conversion, and stops upon trigger event. + Note: First conversion is using minimal sampling time + (see @ref ADC_LL_EC_CHANNEL_SAMPLINGTIME) */ +#define LL_ADC_REG_SAMPLING_MODE_TRIGGER_CONTROLED (ADC_CFGR2_SMPTRIG) /*!< ADC conversions sampling phase is + controlled by trigger events: trigger rising edge for start sampling, + trigger falling edge for stop sampling and start conversion */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode + * @{ + */ +#define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions performed in single mode: + one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR_CONT) /*!< ADC conversions performed in continuous mode: + after the first trigger, following conversions launched successively + automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED (ADC_CFGR_DMAEN) /*!< ADC conversion data are transferred by DMA + in limited mode (one shot mode): DMA transfer requests are stopped when + number of DMA data transfers (number of ADC conversions) is reached. + This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR_DMACFG | ADC_CFGR_DMAEN) /*!< ADC conversion data are + transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, + whatever number of DMA data transferred (number of ADC conversions). + This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_MDF_TRANSFER ADC group regular - ADC conversion data transfer to MDF peripheral + * @{ + */ +#define LL_ADC_REG_MDF_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions data are not transferred to MDF + peripheral */ +#define LL_ADC_REG_MDF_TRANSFER_ENABLE (ADC_CFGR_ADFCFG) /*!< ADC conversion data are transferred to MDF + peripheral. This configuration cannot be used if DMA transfer is enabled. */ +/** + * @} + */ + +#if defined(ADC_SMPR1_SMPPLUS) +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON_CONFIG ADC instance - ADC sampling time common configuration + * @{ + */ +#define LL_ADC_SAMPLINGTIME_COMMON_DEFAULT (0x00000000UL) /*!< ADC sampling time let to default settings. */ +#define LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5 (ADC_SMPR1_SMPPLUS) /*!< ADC additional sampling time 3.5 ADC clock + cycles replacing 2.5 ADC clock cycles (this applies to all channels mapped + with selection sampling time 2.5 ADC clock cycles, whatever channels mapped + on ADC groups regular or injected). */ +/** + * @} + */ +#endif /* ADC_SMPR1_SMPPLUS */ + +/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: + data preserved */ +#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR_OVRMOD) /*!< ADC group regular behavior in case of overrun: + data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE (0x00000000UL) /*!< ADC group regular sequencer disable + (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_SQR1_L_1) /*!< ADC group regular sequencer enable + with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_SQR1_L_2) /*!< ADC group regular sequencer enable + with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_SQR1_L_2 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_SQR1_L_2 | ADC_SQR1_L_1) /*!< ADC group regular sequencer enable + with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (ADC_SQR1_L_2 | ADC_SQR1_L_1 \ + | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 8 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS (ADC_SQR1_L_3) /*!< ADC group regular sequencer enable + with 9 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 10 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1) /*!< ADC group regular sequencer enable + with 11 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_1 \ + | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 12 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2) /*!< ADC group regular sequencer enable + with 13 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \ + | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 14 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \ + | ADC_SQR1_L_1) /*!< ADC group regular sequencerenable + with 15 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 \ + | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable + with 16 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer + discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every rank */ +#define LL_ADC_REG_SEQ_DISCONT_2RANKS (ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enabled with sequence interruption every 2 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_3RANKS (ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 3 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_4RANKS (ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCNUM_0 \ + | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 4 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_5RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 5 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_6RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_0 \ + | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 6 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_7RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 \ + | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 7 ranks */ +#define LL_ADC_REG_SEQ_DISCONT_8RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 \ + | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer + discontinuous mode enable with sequence interruption every 8 ranks */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 8 */ +#define LL_ADC_REG_RANK_9 (ADC_SQR2_REGOFFSET | ADC_REG_RANK_9_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 9 */ +#define LL_ADC_REG_RANK_10 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_10_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 10 */ +#define LL_ADC_REG_RANK_11 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_11_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 11 */ +#define LL_ADC_REG_RANK_12 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_12_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 12 */ +#define LL_ADC_REG_RANK_13 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_13_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 13 */ +#define LL_ADC_REG_RANK_14 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 14 */ +#define LL_ADC_REG_RANK_15 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 15 */ +#define LL_ADC_REG_RANK_16 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group + regular sequencer rank 16 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE ADC group injected - Trigger source + * @{ + */ +#define LL_ADC_INJ_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group injected + conversion trigger internal: SW start. */ +#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO (ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM1 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM1_CH4 (ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM1 channel 4 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_TRGO (ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM2 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM2_CH1 (ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM2 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_CH4 (ADC_JSQR_JEXTSEL_2 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM3 channel 4 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM4_TRGO (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM4 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: external interrupt line 15. + Trigger edge set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM9_CH1 (ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 \ + | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)/*!< ADC group injected + conversion trigger from external peripheral: TIM9 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2 (ADC_JSQR_JEXTSEL_3 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM1 TRGO2 event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM12_TRGO (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM12 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM9_TRGO (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM9 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_CH3 (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 \ + | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)/*!< ADC group injected + conversion trigger from external peripheral: TIM3 channel 3 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_TRGO (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM3 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM3_CH1 (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 \ + | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)/*!< ADC group injected + conversion trigger from external peripheral: TIM3 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM6_TRGO (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 \ + | ADC_JSQR_JEXTSEL_1 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)/*!< ADC group injected + conversion trigger from external peripheral: TIM6 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_TIM15_TRGO (ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 \ + | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: TIM15 TRGO event. Trigger edge + set to rising edge (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2 (ADC_JSQR_JEXTSEL_4 | ADC_JSQR_JEXTSEL_1 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: LPTIM1 channel 2 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2 (ADC_JSQR_JEXTSEL_4 | ADC_JSQR_JEXTSEL_1 \ + | ADC_JSQR_JEXTSEL_0 | ADC_INJ_TRIG_EXT_EDGE_DEFAULT)/*!< ADC group injected + conversion trigger from external peripheral: LPTIM2 channel 2 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +#define LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1 (ADC_JSQR_JEXTSEL_4 | ADC_JSQR_JEXTSEL_2 \ + | ADC_INJ_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group injected + conversion trigger from external peripheral: LPTIM3 channel 1 event (capture + compare: input capture or output capture). Trigger edge set to rising edge + (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIGGER_EDGE ADC group injected - Trigger edge + * @{ + */ +#define LL_ADC_INJ_TRIG_EXT_RISING ( ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion + trigger polarity set to rising edge */ +#define LL_ADC_INJ_TRIG_EXT_FALLING (ADC_JSQR_JEXTEN_1 ) /*!< ADC group injected conversion + trigger polarity set to falling edge */ +#define LL_ADC_INJ_TRIG_EXT_RISINGFALLING (ADC_JSQR_JEXTEN_1 | ADC_JSQR_JEXTEN_0) /*!< ADC group injected conversion + trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_TRIG_AUTO ADC group injected - Automatic trigger mode + * @{ + */ +#define LL_ADC_INJ_TRIG_INDEPENDENT (0x00000000UL) /*!< ADC group injected conversion trigger independent. + Setting mandatory if ADC group injected injected trigger source is set to + an external trigger. */ +#define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR (ADC_CFGR_JAUTO) /*!< ADC group injected conversion trigger from ADC group + regular. Setting compliant only with group injected trigger source set to + SW start, without any further action on ADC group injected conversion start + or stop: in this case, ADC group injected is controlled only from ADC group + regular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_CONTEXT_QUEUE ADC group injected - Context queue mode + * @{ + */ +#define LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE (0x00000000UL) /* Group injected sequence context queue is enabled + and can contain up to 2 contexts. When all contexts have been processed, + the queue maintains the last context active perpetually. */ +#define LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY (ADC_CFGR_JQM) /* Group injected sequence context queue is enabled + and can contain up to 2 contexts. When all contexts have been processed, + the queue is empty and injected group triggers are disabled. */ +#define LL_ADC_INJ_QUEUE_DISABLE (ADC_CFGR_JQDIS) /* Group injected sequence context queue is disabled: + only 1 sequence can be configured and is active perpetually. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_SCAN_LENGTH ADC group injected - Sequencer scan length + * @{ + */ +#define LL_ADC_INJ_SEQ_SCAN_DISABLE (0x00000000UL) /*!< ADC group injected sequencer disable + (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS ( ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable + with 2 ranks in the sequence */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS (ADC_JSQR_JL_1 ) /*!< ADC group injected sequencer enable + with 3 ranks in the sequence */ +#define LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS (ADC_JSQR_JL_1 | ADC_JSQR_JL_0) /*!< ADC group injected sequencer enable + with 4 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_DISCONT_MODE ADC group injected - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_INJ_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group injected sequencer discontinuous mode + disable */ +#define LL_ADC_INJ_SEQ_DISCONT_1RANK (ADC_CFGR_JDISCEN) /*!< ADC group injected sequencer discontinuous mode + enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks + * @{ + */ +#define LL_ADC_INJ_RANK_1 (ADC_JDR1_REGOFFSET \ + | ADC_INJ_RANK_1_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 1 */ +#define LL_ADC_INJ_RANK_2 (ADC_JDR2_REGOFFSET \ + | ADC_INJ_RANK_2_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 2 */ +#define LL_ADC_INJ_RANK_3 (ADC_JDR3_REGOFFSET \ + | ADC_INJ_RANK_3_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 3 */ +#define LL_ADC_INJ_RANK_4 (ADC_JDR4_REGOFFSET \ + | ADC_INJ_RANK_4_JSQR_BITOFFSET_POS) /*!< ADC group inj. sequencer rank 4 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_2CYCLES_5 (0x00000000UL) /*!< Sampling time 2.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_6CYCLES_5 (ADC_SMPR2_SMP10_0) /*!< Sampling time 6.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR2_SMP10_1) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_24CYCLES_5 (ADC_SMPR2_SMP10_1 \ + | ADC_SMPR2_SMP10_0) /*!< Sampling time 24.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_47CYCLES_5 (ADC_SMPR2_SMP10_2) /*!< Sampling time 47.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_92CYCLES_5 (ADC_SMPR2_SMP10_2 \ + | ADC_SMPR2_SMP10_0) /*!< Sampling time 92.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_247CYCLES_5 (ADC_SMPR2_SMP10_2 \ + | ADC_SMPR2_SMP10_1) /*!< Sampling time 247.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_640CYCLES_5 (ADC_SMPR2_SMP10_2 \ + | ADC_SMPR2_SMP10_1 \ + | ADC_SMPR2_SMP10_0) /*!< Sampling time 640.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending + * @{ + */ +#define LL_ADC_SINGLE_ENDED ( ADC_CALFACT_CALFACT_S) /*!< ADC channel ending + set to single ended (literal also used to set calibration mode) */ +#define LL_ADC_DIFFERENTIAL_ENDED (ADC_CR_ADCALDIF | ADC_CALFACT_CALFACT_D) /*!< ADC channel ending + set to differential (literal also used to set calibration mode) */ +#define LL_ADC_BOTH_SINGLE_DIFF_ENDED (LL_ADC_SINGLE_ENDED | LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending + set to both single ended and differential (literal used only to set + calibration factors) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK \ + | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ +#define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring + disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_CFGR_AWD1EN) /*!< ADC analog watchdog monitoring + of all channels, converted by group regular only */ +#define LL_ADC_AWD_ALL_CHANNELS_INJ (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_CFGR_JAWD1EN) /*!< ADC analog watchdog monitoring + of all channels, converted by group injected only */ +#define LL_ADC_AWD_ALL_CHANNELS_REG_INJ (ADC_AWD_CR23_CHANNEL_MASK \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN) /*!< ADC analog watchdog monitoring + of all channels, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_INJ ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN0, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_0_REG_INJ ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN0, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_INJ ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN1, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_1_REG_INJ ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN1, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_INJ ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN2, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_2_REG_INJ ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN2, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_INJ ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN3, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_3_REG_INJ ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN3, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_INJ ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN4, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_4_REG_INJ ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN4, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_INJ ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN5, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_5_REG_INJ ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN5, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_INJ ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN6, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_6_REG_INJ ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN6, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_INJ ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN7, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_7_REG_INJ ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN7, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_INJ ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN8, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_8_REG_INJ ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN8, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_INJ ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN9, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_9_REG_INJ ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN9, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_INJ ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN10, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_10_REG_INJ ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK)\ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN10, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_INJ ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN11, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_11_REG_INJ ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN11, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_INJ ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN12, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_12_REG_INJ ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN12, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_INJ ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN13, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_13_REG_INJ ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN13, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_INJ ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN14, converted by group only */ +#define LL_ADC_AWD_CHANNEL_14_REG_INJ ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN14, converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + monitoring of ADC channel ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_INJ ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN15, converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_15_REG_INJ ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN15, converted by either group + regular or injected */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN16, + converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_INJ ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN16, + converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_16_REG_INJ ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN16, + converted by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN17, + converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN17, + converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_17_REG_INJ ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN17, + by either group regular or injected */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN18, + converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN18, + converted by group injected only */ +#define LL_ADC_AWD_CHANNEL_18_REG_INJ ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC channel ADCx_IN18, + converted by either group regular or injected */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VrefInt: Internal + voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VrefInt: Internal + voltage reference, converted by group injected only */ +#define LL_ADC_AWD_CH_VREFINT_REG_INJ ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VrefInt: Internal + voltage reference, converted by either group regular or injected */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to internal temperature sensor, + converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to internal temperature sensor, + converted by group injected only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to internal temperature sensor, + converted by either group regular or injected */ +#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to Vbat/4: Vbat + voltage through a divider ladder of factor 1/4 to have channel voltage + always below Vdda, converted by group regular only */ +#define LL_ADC_AWD_CH_VBAT_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to Vbat/4: Vbat + voltage through a divider ladder of factor 1/4 to have channel voltage + always below Vdda, converted by group injected only */ +#define LL_ADC_AWD_CH_VBAT_REG_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to Vbat/4: Vbat + voltage through a divider ladder of factor 1/4 to have channel voltage + always below Vdda */ +#define LL_ADC_AWD_CH_VDDCORE_REG ((LL_ADC_CHANNEL_VDDCORE & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VddCore, + converted by group regular only */ +#define LL_ADC_AWD_CH_VDDCORE_INJ ((LL_ADC_CHANNEL_VDDCORE & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + monitoring of ADC internal channel connected to VddCore, + converted by group injected only */ +#define LL_ADC_AWD_CH_VDDCORE_REG_INJ ((LL_ADC_CHANNEL_VDDCORE & ADC_CHANNEL_ID_MASK) \ + | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN \ + | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring + of ADC internal channel connected to VddCore, + converted by either group regular or injected */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR1_HT1) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW (ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR1_HT1 \ + | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low + concatenated into the same data */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_FILTERING_CONFIG Analog watchdog - filtering config + * @{ + */ +#define LL_ADC_AWD_FILTERING_NONE (0x00000000UL) /*!< ADC analog watchdog no filtering, + one out-of-window sample is needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_2SAMPLES (ADC_TR1_AWDFILT_0) /*!< ADC analog watchdog 2 + out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_3SAMPLES (ADC_TR1_AWDFILT_1) /*!< ADC analog watchdog 3 + consecutives out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_4SAMPLES (ADC_TR1_AWDFILT_1 | ADC_TR1_AWDFILT_0) /*!< ADC analog watchdog 4 + consecutives out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_5SAMPLES (ADC_TR1_AWDFILT_2) /*!< ADC analog watchdog 5 + consecutives out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_6SAMPLES (ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_0) /*!< ADC analog watchdog 6 + consecutives out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_7SAMPLES (ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_1) /*!< ADC analog watchdog 7 + consecutives out-of-window samples are needed to raise flag or interrupt */ +#define LL_ADC_AWD_FILTERING_8SAMPLES (ADC_TR1_AWDFILT_2 | ADC_TR1_AWDFILT_1 \ + | ADC_TR1_AWDFILT_0) /*!< ADC analog watchdog 8 + consecutives out-of-window samples are needed to raise flag or interrupt */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope + * @{ + */ +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED (ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of + ADC group regular. If group injected interrupts group regular: + when ADC group injected is triggered, the oversampling on ADC group regular + is temporary stopped and continued afterwards. */ +#define LL_ADC_OVS_GRP_REGULAR_RESUMED (ADC_CFGR2_ROVSM | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of + ADC group regular. If group injected interrupts group regular: + when ADC group injected is triggered, the oversampling on ADC group regular + is resumed from start (oversampler buffer reset). */ +#define LL_ADC_OVS_GRP_INJECTED (ADC_CFGR2_JOVSE) /*!< ADC oversampling on conversions of + ADC group injected. */ +#define LL_ADC_OVS_GRP_INJ_REG_RESUMED (ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of + both ADC groups regular and injected. If group injected interrupting group + regular: when ADC group injected is triggered, the oversampling on ADC group + regular is resumed from start (oversampler buffer reset). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode +(all conversions of oversampling ratio are done from 1 trigger) */ +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TROVS) /*!< ADC oversampling discontinuous mode: discontinuous + mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define LL_ADC_OVS_RATIO_2 (0x00000000UL) /*!< ADC oversampling ratio of 2 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_4 (ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_8 (ADC_CFGR2_OVSR_1) /*!< ADC oversampling ratio of 8 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_16 (ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_32 (ADC_CFGR2_OVSR_2) /*!< ADC oversampling ratio of 32 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_64 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_128 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1) /*!< ADC oversampling ratio of 128 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +#define LL_ADC_OVS_RATIO_256 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 \ + | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 + (sum of conversions data computed to result as oversampling conversion data + (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SHIFT Oversampling - Data right shift + * @{ + */ +#define LL_ADC_OVS_SHIFT_NONE (0x00000000UL) /*!< ADC oversampling no shift + (sum of the ADC conversions data is not divided to result as oversampling + conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_1 (ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 1 + (sum of the ADC conversions data (after OVS ratio) is divided by 2 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_2 (ADC_CFGR2_OVSS_1) /*!< ADC oversampling right shift of 2 + (sum of the ADC conversions data (after OVS ratio) is divided by 4 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_3 (ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 3 + (sum of the ADC conversions data (after OVS ratio) is divided by 8 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_4 (ADC_CFGR2_OVSS_2) /*!< ADC oversampling right shift of 4 + (sum of the ADC conversions data (after OVS ratio) is divided by 16 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_5 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 5 + (sum of the ADC conversions data (after OVS ratio) is divided by 32 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_6 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1) /*!< ADC oversampling right shift of 6 + (sum of the ADC conversions data (after OVS ratio) is divided by 64 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_7 (ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 \ + | ADC_CFGR2_OVSS_0) /*!< ADC oversampling right shift of 7 + (sum of the ADC conversions data (after OVS ratio) is divided by 128 + to result as oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_8 (ADC_CFGR2_OVSS_3) /*!< ADC oversampling right shift of 8 + (sum of the ADC conversions data (after OVS ratio) is divided by 256 + to result as oversampling conversion data) */ +/** + * @} + */ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADC_LL_EC_MULTI_MODE Multimode - Mode + * @{ + */ +#define LL_ADC_MULTI_INDEPENDENT (0x00000000UL) /*!< ADC dual mode disabled (ADC + independent mode) */ +#define LL_ADC_MULTI_DUAL_REG_SIMULT (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1) /*!< ADC dual mode enabled: group regular + simultaneous */ +#define LL_ADC_MULTI_DUAL_REG_INTERL (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_1 \ + | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group + regular interleaved */ +#define LL_ADC_MULTI_DUAL_INJ_SIMULT (ADC_CCR_DUAL_2 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected + simultaneous */ +#define LL_ADC_MULTI_DUAL_INJ_ALTERN (ADC_CCR_DUAL_3 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: group injected + alternate trigger. Works only with external triggers (not SW start) */ +#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM (ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group + regular simultaneous + group injected simultaneous */ +#define LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT (ADC_CCR_DUAL_1) /*!< ADC dual mode enabled: Combined group + regular simultaneous + group injected alternate trigger */ +#define LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM (ADC_CCR_DUAL_1 | ADC_CCR_DUAL_0) /*!< ADC dual mode enabled: Combined group + regular interleaved + group injected simultaneous */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_MULTI_DMA_TRANSFER Multimode - DMA transfer + * @{ + */ +#define LL_ADC_MULTI_REG_DMA_EACH_ADC (0x00000000UL) /*!< ADC multimode group regular + conversions are transferred by DMA: each ADC uses its own DMA channel, + with its individual DMA transfer settings */ +#define LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B (ADC_CCR_MDMA_1) /*!< ADC multimode group regular + conversions are transferred by DMA, one DMA channel for both ADC(DMA of + ADC master), in limited mode (one shot mode): DMA transfer requests + are stopped when number of DMA data transfers (number of ADC conversions) + is reached. This ADC mode is intended to be used with DMA mode + non-circular. Setting for ADC resolution of 12 and 10 bits */ +#define LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B (ADC_CCR_MDMA_1 | ADC_CCR_MDMA_0) /*!< ADC multimode group regular + conversions are transferred by DMA, one DMA channel for both ADC(DMA of + ADC master), in limited mode (one shot mode): DMA transfer requests + are stopped when number of DMA data transfers (number of ADC conversions) + is reached. This ADC mode is intended to be used with DMA mode + non-circular. Setting for ADC resolution of 8 and 6 bits */ +#define LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B (ADC_CCR_DMACFG | ADC_CCR_MDMA_1) /*!< ADC multimode group regular + conversions are transferred by DMA, one DMA channel for both ADC(DMA of + ADC master), in unlimited mode: DMA transfer requests are unlimited, + whatever number of DMA data transferred (number of ADC conversions). + This ADC mode is intended to be used with DMA mode circular. + Setting for ADC resolution of 12 and 10 bits */ +#define LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B (ADC_CCR_DMACFG | ADC_CCR_MDMA_1 \ + | ADC_CCR_MDMA_0) /*!< ADC multimode group regular + conversions are transferred by DMA, one DMA channel for both ADC (DMA of + ADC master), in unlimited mode: DMA transfer requests are unlimited, + whatever number of DMA data transferred (number of ADC conversions). + This ADC mode is intended to be used with DMA mode circular. + Setting for ADC resolution of 8 and 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_MULTI_TWOSMP_DELAY Multimode - Delay between two sampling phases + * @{ + */ +#define LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE (0x00000000UL) /*!< ADC multimode delay between two + sampling phases: 1 ADC clock cycle */ +#define LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES (ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 2 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES (ADC_CCR_DELAY_1) /*!< ADC multimode delay between two + sampling phases: 3 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES (ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 4 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES (ADC_CCR_DELAY_2) /*!< ADC multimode delay between two + sampling phases: 5 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 6 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1) /*!< ADC multimode delay between two + sampling phases: 7 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES (ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 \ + | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 8 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES (ADC_CCR_DELAY_3) /*!< ADC multimode delay between two + sampling phases: 9 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 10 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1) /*!< ADC multimode delay between two + sampling phases: 11 ADC clock cycles */ +#define LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 \ + | ADC_CCR_DELAY_0) /*!< ADC multimode delay between two + sampling phases: 12 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_MULTI_MASTER_SLAVE Multimode - ADC master or slave + * @{ + */ +#define LL_ADC_MULTI_MASTER (ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC + instances: ADC master */ +#define LL_ADC_MULTI_SLAVE (ADC_CDR_RDATA_SLV) /*!< In multimode, selection among several ADC + instances: ADC slave */ +#define LL_ADC_MULTI_MASTER_SLAVE (ADC_CDR_RDATA_SLV \ + | ADC_CDR_RDATA_MST) /*!< In multimode, selection among several ADC + instances: both ADC master and ADC slave */ +/** + * @} + */ + +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** @defgroup ADC_LL_EC_HELPER_MACRO Definitions of constants used by helper macro + * @{ + */ +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro + @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on + calibration parameters. This value is coded on 16 bits + (to fit on signed word or double word) and corresponds + to an inconsistent temperature value. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC peripheral HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 series: */ +/* - ADC calibration time: maximum delay is 112/fADC. */ +/* (refer to device datasheet, parameter "tCAL") */ +/* - ADC enable time: maximum delay is 1 conversion cycle. */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC disable time: maximum delay should be a few ADC clock cycles */ +/* - ADC stop conversion time: maximum delay should be a few ADC clock */ +/* cycles */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tADCVREG_STUP"). */ +/* Unit: us */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage + regulator start-up time) */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tstart_vrefint"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ( 12UL) /*!< Delay for internal voltage reference stabilization + time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization + time (starting from ADC enable, refer to + @ref LL_ADC_Enable()) */ + +/* Delay required between ADC end of calibration and ADC enable. */ +/* Note: On this STM32 series, a minimum number of ADC clock cycles */ +/* are required between ADC end of calibration and ADC enable. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 4UL) /*!< Delay required between ADC end of calibration + and ADC enable */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) ? \ + ( \ + ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ + ) \ + : \ + ( \ + (uint32_t)POSITION_VAL((__CHANNEL__)) \ + ) \ + ) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (2) + * @arg @ref LL_ADC_CHANNEL_5 (2) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1)(3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(3) + * @arg @ref LL_ADC_CHANNEL_VBAT (1)(3) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (2) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) <= 9UL) ? \ + ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__)) | \ + (ADC_SMPR1_REGOFFSET | (((3UL * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + : \ + ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__)) | \ + (ADC_SMPR2_REGOFFSET | (((3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ + ) \ + ) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel + connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1. + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + ((((__ADC_INSTANCE__) == ADC1) \ + &&(((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT)) \ + ) \ + || \ + (((__ADC_INSTANCE__) == ADC2) \ + &&(((__CHANNEL__) == LL_ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VDDCORE)) \ + ) \ + ) + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (2) + * @arg @ref LL_ADC_CHANNEL_5 (2) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1)(3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(3) + * @arg @ref LL_ADC_CHANNEL_VBAT (1)(3) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (2) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @arg @ref LL_ADC_GROUP_INJECTED + * @arg @ref LL_ADC_GROUP_REGULAR_INJECTED + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) + * + * (0) On STM32H7RS, parameter available only on analog watchdog number: AWD1.\n + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__GROUP__) == LL_ADC_GROUP_REGULAR) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ + : \ + ((__GROUP__) == LL_ADC_GROUP_INJECTED) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) \ + : \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ + ) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds() + * or @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the ADC analog watchdog threshold high + * or low from raw value containing both thresholds concatenated. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, to get analog watchdog threshold high from the register raw value: + * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, ); + * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \ + (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) \ + & LL_ADC_AWD_THRESHOLD_LOW) + +/** + * @brief Helper macro to set the ADC calibration value with both single ended + * and differential modes calibration factors concatenated. + * @note To be used with function @ref LL_ADC_SetCalibrationFactor(). + * Example, to set calibration factors single ended to 0x55 + * and differential ended to 0x2A: + * LL_ADC_SetCalibrationFactor( + * ADC1, + * __LL_ADC_CALIB_FACTOR_SINGLE_DIFF(0x55, 0x2A)) + * @param __CALIB_FACTOR_SINGLE_ENDED__ Value between Min_Data=0x00 and Max_Data=0x7F + * @param __CALIB_FACTOR_DIFFERENTIAL__ Value between Min_Data=0x00 and Max_Data=0x7F + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +#define __LL_ADC_CALIB_FACTOR_SINGLE_DIFF(__CALIB_FACTOR_SINGLE_ENDED__, __CALIB_FACTOR_DIFFERENTIAL__) \ + (((__CALIB_FACTOR_DIFFERENTIAL__) << ADC_CALFACT_CALFACT_D_Pos) | (__CALIB_FACTOR_SINGLE_ENDED__)) + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Helper macro to get the ADC multimode conversion data of ADC master + * or ADC slave from raw value with both ADC conversion data concatenated. + * @note This macro is intended to be used when multimode transfer by DMA + * is enabled: refer to function @ref LL_ADC_SetMultiDMATransfer(). + * In this case the transferred data need to processed with this macro + * to separate the conversion data of ADC master and ADC slave. + * @param __ADC_MULTI_MASTER_SLAVE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_MASTER + * @arg @ref LL_ADC_MULTI_SLAVE + * @param __ADC_MULTI_CONV_DATA__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(__ADC_MULTI_MASTER_SLAVE__, __ADC_MULTI_CONV_DATA__) \ + (((__ADC_MULTI_CONV_DATA__) >> ((ADC_CDR_RDATA_SLV_Pos) & ~(__ADC_MULTI_MASTER_SLAVE__))) & ADC_CDR_RDATA_MST) +#endif /* ADC_MULTIMODE_SUPPORT */ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Helper macro to select, from a ADC instance, to which ADC instance + * it has a dependence in multimode (ADC master of the corresponding + * ADC common instance). + * @note In case of device with multimode available and a mix of + * ADC instances compliant and not compliant with multimode feature, + * ADC instances not compliant with multimode feature are + * considered as master instances (do not depend to + * any other ADC instance). + * @param __ADCx__ ADC instance + * @retval __ADCx__ ADC instance master of the corresponding ADC common instance + */ +#define __LL_ADC_MULTI_INSTANCE_MASTER(__ADCx__) \ + ( ( ((__ADCx__) == ADC2) \ + )? \ + (ADC1) \ + : \ + (__ADCx__) \ + ) +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) (ADC12_COMMON) +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#if defined(ADC2) +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + (LL_ADC_IsEnabled(ADC1) | LL_ADC_IsEnabled(ADC2)) +#else +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) (LL_ADC_IsEnabled(ADC1)) +#endif /* ADC2 */ + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (0xFFFUL >> ((__ADC_RESOLUTION__) >> (ADC_CFGR_RES_BITOFFSET_POS - 1UL))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +(((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR_RES_BITOFFSET_POS - 1UL))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR_RES_BITOFFSET_POS - 1UL)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value) in + * differential ended mode. + * @note ADC data from ADC data register is unsigned and centered around + * middle code in. Converted voltage can be positive or negative + * depending on differential input voltages. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DIFF_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__)\ +((int32_t)((__ADC_DATA__) << 1U) * (int32_t)(__VREFANALOG_VOLTAGE__)\ + / (int32_t)(__LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__))\ + - (int32_t)(__VREFANALOG_VOLTAGE__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = ((TS_ADC_DATA - TS_CAL1) + * * (TS_CAL2_TEMP - TS_CAL1_TEMP)) + * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TS_CAL2 - TS_CAL1) + * / (TS_CAL2_TEMP - TS_CAL1_TEMP) + * TS_CAL1 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * TS_CAL2 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note On this STM32 series, calibration data of temperature sensor + * corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * temperature sensor. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature + * sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + * In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value) + */ +#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__)\ +((((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) != 0) ? \ + (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ + * (__VREFANALOG_VOLTAGE__)) \ + / TEMPSENSOR_CAL_VREFANALOG) \ + - (int32_t) *TEMPSENSOR_CAL1_ADDR) \ + ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \ + ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \ + ) + TEMPSENSOR_CAL1_TEMP \ + ) \ + : \ + ((int32_t)LL_ADC_TEMPERATURE_CALC_ERROR) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12 bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value + * (unit: uV/DegCelsius). + * On STM32H7RS, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value + * (at temperature and Vref+ defined in parameters below) (unit: mV). + * On this STM32 series, refer to datasheet parameter "V30" (corresponding + * to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage + * (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) value (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((((int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000UL) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000UL) \ + ) \ + ) / (int32_t)(__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (int32_t)(__TEMPSENSOR_CALX_TEMP__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR RDATA LL_ADC_DMA_GetRegAddr\n + * CDR RDATA_MST LL_ADC_DMA_GetRegAddr\n + * CDR RDATA_SLV LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA_MULTI (1) + * + * (1) Available on devices with several ADC instances. + * @retval ADC register address + */ +#if defined(ADC_MULTIMODE_SUPPORT) +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(const ADC_TypeDef *ADCx, uint32_t Register) +{ + uint32_t data_reg_addr; + + if (Register == LL_ADC_DMA_REG_REGULAR_DATA) + { + /* Retrieve address of register DR */ + data_reg_addr = (uint32_t) &(ADCx->DR); + } + else /* (Register == LL_ADC_DMA_REG_REGULAR_DATA_MULTI) */ + { + /* Retrieve address of register CDR */ + data_reg_addr = (uint32_t) &((__LL_ADC_COMMON_INSTANCE(ADCx))->CDR); + } + + return data_reg_addr; +} +#else +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(const ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(Register); + + /* Retrieve address of register DR */ + return (uint32_t) &(ADCx->DR); +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several + * ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 series, if ADC group injected is used, some + * clock ratio constraints between ADC clock and AHB clock + * must be respected. + * Refer to reference manual. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR CKMODE LL_ADC_SetCommonClock\n + * CCR PRESC LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_CKMODE | ADC_CCR_PRESC, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR CKMODE LL_ADC_GetCommonClock\n + * CCR PRESC LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_CKMODE | ADC_CCR_PRESC)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n + * CCR TSEN LL_ADC_SetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChAdd + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChRem + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n + * CCR TSEN LL_ADC_GetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set parameter on ADC instance scope: measurement path to + * internal channels (Vcore, Vcpu...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VDDCORE | + * LL_ADC_PATH_INTERNAL_...) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay may be required required for analog stabilization. + * Refer to device datasheet. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll OR OP0 LL_ADC_SetPathInternalCh + * @param ADCx ADC instance + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VDDCORE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetPathInternalCh(ADC_TypeDef *ADCx, uint32_t PathInternal) +{ + MODIFY_REG(ADCx->OR, ADC_OR_OP0, PathInternal); +} + +/** + * @brief Set parameter on ADC instance scope: measurement path to + * internal channels (Vcore, Vcpu...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VDDCORE | + * LL_ADC_PATH_INTERNAL_...) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay may be required required for analog stabilization. + * Refer to device datasheet. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll OR OP0 LL_ADC_SetPathInternalChAdd + * @param ADCx ADC instance + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VDDCORE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetPathInternalChAdd(ADC_TypeDef *ADCx, uint32_t PathInternal) +{ + SET_BIT(ADCx->OR, PathInternal); +} + +/** + * @brief Set parameter on ADC instance scope: measurement path to + * internal channels (Vcore, Vcpu...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VDDCORE | + * LL_ADC_PATH_INTERNAL_...) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay may be required required for analog stabilization. + * Refer to device datasheet. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @rmtoll OR OP0 LL_ADC_SetPathInternalChRem + * @param ADCx ADC instance + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VDDCORE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetPathInternalChRem(ADC_TypeDef *ADCx, uint32_t PathInternal) +{ + CLEAR_BIT(ADCx->OR, PathInternal); +} + +/** + * @brief Get parameter on ADC instance scope: measurement path to + * internal channels (Vcore, Vcpu...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VDDCORE | + * LL_ADC_PATH_INTERNAL_...) + * @rmtoll OR OP0 LL_ADC_GetPathInternalCh + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VDDCORE + */ +__STATIC_INLINE uint32_t LL_ADC_GetPathInternalCh(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->OR, ADC_OR_OP0)); +} + +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * (calibration factor must be specified for each of these + * differential modes, if used afterwards and if the application + * requires their calibration). + * @note In case of setting calibration factors of both modes single ended + * and differential (parameter LL_ADC_BOTH_SINGLE_DIFF_ENDED): + * both calibration factors must be concatenated. + * To perform this processing, use helper macro + * @ref __LL_ADC_CALIB_FACTOR_SINGLE_DIFF(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT_S LL_ADC_SetCalibrationFactor\n + * CALFACT CALFACT_D LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param SingleDiff This parameter can be one of the following values: + * @arg @ref LL_ADC_SINGLE_ENDED + * @arg @ref LL_ADC_DIFFERENTIAL_ENDED + * @arg @ref LL_ADC_BOTH_SINGLE_DIFF_ENDED + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t SingleDiff, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK, + CalibrationFactor << (((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) + >> ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4) + & ~(SingleDiff & ADC_CALFACT_CALFACT_S))); +} + +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * @rmtoll CALFACT CALFACT_S LL_ADC_GetCalibrationFactor\n + * CALFACT CALFACT_D LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @param SingleDiff This parameter can be one of the following values: + * @arg @ref LL_ADC_SINGLE_ENDED + * @arg @ref LL_ADC_DIFFERENTIAL_ENDED + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(const ADC_TypeDef *ADCx, uint32_t SingleDiff) +{ + /* Retrieve bits with position in register depending on parameter */ + /* "SingleDiff". */ + /* Parameter used with mask "ADC_SINGLEDIFF_CALIB_FACTOR_MASK" because */ + /* containing other bits reserved for other purpose. */ + return (uint32_t)(READ_BIT(ADCx->CALFACT, + (SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK)) + >> ((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >> + ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4)); +} + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR ALIGN LL_ADC_GetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_ALIGN)); +} + +/** + * @brief Set ADC low power mode. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * or previous sequence conversions data (for ADC group injected) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR AUTDLY LL_ADC_SetLowPowerMode + * @param ADCx ADC instance + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_AUTDLY, LowPowerMode); +} + +/** + * @brief Get ADC low power mode: + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * or previous sequence conversions data (for ADC group injected) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CFGR AUTDLY LL_ADC_GetLowPowerMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_AUTDLY)); +} + +/** + * @brief Set ADC selected offset instance 1, 2, 3 or 4. + * @note This function set the 2 items of offset configuration: + * - ADC channel to which the offset programmed will be applied + * (independently of channel mapped on ADC group regular + * or group injected) + * - Offset level (offset to be subtracted from the raw + * converted data). + * @note Caution: Offset format is dependent to ADC resolution: + * offset has to be left-aligned on bit 11, the LSB (right bits) + * are set to 0. + * @note This function enables the offset, by default. It can be forced + * to disable state using function LL_ADC_SetOffsetState(). + * @note If a channel is mapped on several offsets numbers, only the offset + * with the lowest value is considered for the subtraction. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @note On STM32H7RS, some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN0..5). + * @rmtoll OFR1 OFFSET1_CH LL_ADC_SetOffset\n + * OFR1 OFFSET1 LL_ADC_SetOffset\n + * OFR1 OFFSET1_EN LL_ADC_SetOffset\n + * OFR2 OFFSET2_CH LL_ADC_SetOffset\n + * OFR2 OFFSET2 LL_ADC_SetOffset\n + * OFR2 OFFSET2_EN LL_ADC_SetOffset\n + * OFR3 OFFSET3_CH LL_ADC_SetOffset\n + * OFR3 OFFSET3 LL_ADC_SetOffset\n + * OFR3 OFFSET3_EN LL_ADC_SetOffset\n + * OFR4 OFFSET4_CH LL_ADC_SetOffset\n + * OFR4 OFFSET4 LL_ADC_SetOffset\n + * OFR4 OFFSET4_EN LL_ADC_SetOffset + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @param OffsetLevel Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOffset(ADC_TypeDef *ADCx, uint32_t Offsety, uint32_t Channel, uint32_t OffsetLevel) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + MODIFY_REG(*preg, + ADC_OFR1_OFFSET1_EN | ADC_OFR1_OFFSET1_CH | ADC_OFR1_OFFSET1, + ADC_OFR1_OFFSET1_EN | (Channel & ADC_CHANNEL_ID_NUMBER_MASK) | OffsetLevel); +} + +/** + * @brief Get for the ADC selected offset instance 1, 2, 3 or 4: + * Channel to which the offset programmed will be applied + * (independently of channel mapped on ADC group regular + * or group injected) + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @note On STM32H7RS, some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN0..5). + * @rmtoll OFR1 OFFSET1_CH LL_ADC_GetOffsetChannel\n + * OFR2 OFFSET2_CH LL_ADC_GetOffsetChannel\n + * OFR3 OFFSET3_CH LL_ADC_GetOffsetChannel\n + * OFR4 OFFSET4_CH LL_ADC_GetOffsetChannel + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (2) + * @arg @ref LL_ADC_CHANNEL_5 (2) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1)(3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(3) + * @arg @ref LL_ADC_CHANNEL_VBAT (1)(3) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (2) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_GetOffsetChannel(const ADC_TypeDef *ADCx, uint32_t Offsety) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + return (uint32_t) READ_BIT(*preg, ADC_OFR1_OFFSET1_CH); +} + +/** + * @brief Get for the ADC selected offset instance 1, 2, 3 or 4: + * Offset level (offset to be subtracted from the raw + * converted data). + * @note Caution: Offset format is dependent to ADC resolution: + * offset has to be left-aligned on bit 11, the LSB (right bits) + * are set to 0. + * @rmtoll OFR1 OFFSET1 LL_ADC_GetOffsetLevel\n + * OFR2 OFFSET2 LL_ADC_GetOffsetLevel\n + * OFR3 OFFSET3 LL_ADC_GetOffsetLevel\n + * OFR4 OFFSET4 LL_ADC_GetOffsetLevel + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetOffsetLevel(const ADC_TypeDef *ADCx, uint32_t Offsety) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + return (uint32_t) READ_BIT(*preg, ADC_OFR1_OFFSET1); +} + +/** + * @brief Set for the ADC selected offset instance 1, 2, 3 or 4: + * force offset state disable or enable + * without modifying offset channel or offset value. + * @note This function should be needed only in case of offset to be + * enabled-disabled dynamically, and should not be needed in other cases: + * function LL_ADC_SetOffset() automatically enables the offset. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll OFR1 OFFSET1_EN LL_ADC_SetOffsetState\n + * OFR2 OFFSET2_EN LL_ADC_SetOffsetState\n + * OFR3 OFFSET3_EN LL_ADC_SetOffsetState\n + * OFR4 OFFSET4_EN LL_ADC_SetOffsetState + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @param OffsetState This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_DISABLE + * @arg @ref LL_ADC_OFFSET_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOffsetState(ADC_TypeDef *ADCx, uint32_t Offsety, uint32_t OffsetState) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + MODIFY_REG(*preg, + ADC_OFR1_OFFSET1_EN, + OffsetState); +} + +/** + * @brief Get for the ADC selected offset instance 1, 2, 3 or 4: + * offset state disabled or enabled. + * @rmtoll OFR1 OFFSET1_EN LL_ADC_GetOffsetState\n + * OFR2 OFFSET2_EN LL_ADC_GetOffsetState\n + * OFR3 OFFSET3_EN LL_ADC_GetOffsetState\n + * OFR4 OFFSET4_EN LL_ADC_GetOffsetState + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OFFSET_DISABLE + * @arg @ref LL_ADC_OFFSET_ENABLE + */ +__STATIC_INLINE uint32_t LL_ADC_GetOffsetState(const ADC_TypeDef *ADCx, uint32_t Offsety) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + return (uint32_t) READ_BIT(*preg, ADC_OFR1_OFFSET1_EN); +} + +/** + * @brief Set for the ADC selected offset instance 1, 2, 3 or 4: + * choose offset sign. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll OFR1 OFFSETPOS LL_ADC_SetOffsetSign\n + * OFR2 OFFSETPOS LL_ADC_SetOffsetSign\n + * OFR3 OFFSETPOS LL_ADC_SetOffsetSign\n + * OFR4 OFFSETPOS LL_ADC_SetOffsetSign + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @param OffsetSign This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_SIGN_NEGATIVE + * @arg @ref LL_ADC_OFFSET_SIGN_POSITIVE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOffsetSign(ADC_TypeDef *ADCx, uint32_t Offsety, uint32_t OffsetSign) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + MODIFY_REG(*preg, + ADC_OFR1_OFFSETPOS, + OffsetSign); +} + +/** + * @brief Get for the ADC selected offset instance 1, 2, 3 or 4: + * offset sign if positive or negative. + * @rmtoll OFR1 OFFSETPOS LL_ADC_GetOffsetSign\n + * OFR2 OFFSETPOS LL_ADC_GetOffsetSign\n + * OFR3 OFFSETPOS LL_ADC_GetOffsetSign\n + * OFR4 OFFSETPOS LL_ADC_GetOffsetSign + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OFFSET_SIGN_NEGATIVE + * @arg @ref LL_ADC_OFFSET_SIGN_POSITIVE + */ +__STATIC_INLINE uint32_t LL_ADC_GetOffsetSign(const ADC_TypeDef *ADCx, uint32_t Offsety) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + return (uint32_t) READ_BIT(*preg, ADC_OFR1_OFFSETPOS); +} + +/** + * @brief Set for the ADC selected offset instance 1, 2, 3 or 4: + * choose offset saturation mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll OFR1 SATEN LL_ADC_SetOffsetSaturation\n + * OFR2 SATEN LL_ADC_SetOffsetSaturation\n + * OFR3 SATEN LL_ADC_SetOffsetSaturation\n + * OFR4 SATEN LL_ADC_SetOffsetSaturation + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @param OffsetSaturation This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_SATURATION_ENABLE + * @arg @ref LL_ADC_OFFSET_SATURATION_DISABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOffsetSaturation(ADC_TypeDef *ADCx, uint32_t Offsety, uint32_t OffsetSaturation) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + MODIFY_REG(*preg, + ADC_OFR1_SATEN, + OffsetSaturation); +} + +/** + * @brief Get for the ADC selected offset instance 1, 2, 3 or 4: + * offset saturation if enabled or disabled. + * @rmtoll OFR1 SATEN LL_ADC_GetOffsetSaturation\n + * OFR2 SATEN LL_ADC_GetOffsetSaturation\n + * OFR3 SATEN LL_ADC_GetOffsetSaturation\n + * OFR4 SATEN LL_ADC_GetOffsetSaturation + * @param ADCx ADC instance + * @param Offsety This parameter can be one of the following values: + * @arg @ref LL_ADC_OFFSET_1 + * @arg @ref LL_ADC_OFFSET_2 + * @arg @ref LL_ADC_OFFSET_3 + * @arg @ref LL_ADC_OFFSET_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OFFSET_SATURATION_ENABLE + * @arg @ref LL_ADC_OFFSET_SATURATION_DISABLE + */ +__STATIC_INLINE uint32_t LL_ADC_GetOffsetSaturation(const ADC_TypeDef *ADCx, uint32_t Offsety) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->OFR1, Offsety); + + return (uint32_t) READ_BIT(*preg, ADC_OFR1_SATEN); +} + +#if defined(ADC_SMPR1_SMPPLUS) +/** + * @brief Set ADC sampling time common configuration impacting + * settings of sampling time channel wise. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll SMPR1 SMPPLUS LL_ADC_SetSamplingTimeCommonConfig + * @param ADCx ADC instance + * @param SamplingTimeCommonConfig This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_DEFAULT + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonConfig(ADC_TypeDef *ADCx, uint32_t SamplingTimeCommonConfig) +{ + MODIFY_REG(ADCx->SMPR1, ADC_SMPR1_SMPPLUS, SamplingTimeCommonConfig); +} + +/** + * @brief Get ADC sampling time common configuration impacting + * settings of sampling time channel wise. + * @rmtoll SMPR1 SMPPLUS LL_ADC_GetSamplingTimeCommonConfig + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_DEFAULT + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonConfig(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->SMPR1, ADC_SMPR1_SMPPLUS)); +} +#endif /* ADC_SMPR1_SMPPLUS */ + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 series having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR EXTSEL LL_ADC_REG_SetTriggerSource\n + * CFGR EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM12_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM1_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM2_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM3_CH1 + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL, TriggerSource); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CFGR EXTSEL LL_ADC_REG_GetTriggerSource\n + * CFGR EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM12_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM1_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM2_CH1 + * @arg @ref LL_ADC_REG_TRIG_EXT_LPTIM3_CH1 + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(const ADC_TypeDef *ADCx) +{ + __IO uint32_t trigger_source = READ_BIT(ADCx->CFGR, ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR_EXTEN {0; 1; 2; 3}. */ + uint32_t shift_exten = ((trigger_source & ADC_CFGR_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR_EXTEN and ADC_CFGR_EXTSEL */ + /* to match with triggers literals definition. */ + return ((trigger_source + & (ADC_REG_TRIG_SOURCE_MASK >> shift_exten) & ADC_CFGR_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> shift_exten) & ADC_CFGR_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + * or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CFGR EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR EXTEN LL_ADC_REG_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_EXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @rmtoll CFGR EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN)); +} + +/** + * @brief Set ADC sampling mode. + * @note This function set the ADC conversion sampling mode + * @note This mode applies to regular group only. + * @note Set sampling mode is applied to all conversion of regular group. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR2 BULB LL_ADC_REG_SetSamplingMode\n + * CFGR2 SMPTRIG LL_ADC_REG_SetSamplingMode + * @param ADCx ADC instance + * @param SamplingMode This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SAMPLING_MODE_NORMAL + * @arg @ref LL_ADC_REG_SAMPLING_MODE_BULB + * @arg @ref LL_ADC_REG_SAMPLING_MODE_TRIGGER_CONTROLED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSamplingMode(ADC_TypeDef *ADCx, uint32_t SamplingMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_BULB | ADC_CFGR2_SMPTRIG, SamplingMode); +} + +/** + * @brief Get the ADC sampling mode + * @rmtoll CFGR2 BULB LL_ADC_REG_GetSamplingMode\n + * CFGR2 SMPTRIG LL_ADC_REG_GetSamplingMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SAMPLING_MODE_NORMAL + * @arg @ref LL_ADC_REG_SAMPLING_MODE_BULB + * @arg @ref LL_ADC_REG_SAMPLING_MODE_TRIGGER_CONTROLED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSamplingMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_BULB | ADC_CFGR2_SMPTRIG)); +} + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SQR1 L LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + MODIFY_REG(ADCx->SQR1, ADC_SQR1_L, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll SQR1 L LL_ADC_REG_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->SQR1, ADC_SQR1_L)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note It is not possible to enable both ADC auto-injected mode + * and ADC group regular sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR DISCEN LL_ADC_REG_SetSequencerDiscont\n + * CFGR DISCNUM LL_ADC_REG_SetSequencerDiscont + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR DISCEN LL_ADC_REG_GetSequencerDiscont\n + * CFGR DISCNUM LL_ADC_REG_GetSequencerDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SQR1 SQ1 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ2 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ3 LL_ADC_REG_SetSequencerRanks\n + * SQR1 SQ4 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ5 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ6 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ7 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ8 LL_ADC_REG_SetSequencerRanks\n + * SQR2 SQ9 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ10 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ11 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ12 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ13 LL_ADC_REG_SetSequencerRanks\n + * SQR3 SQ14 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ15 LL_ADC_REG_SetSequencerRanks\n + * SQR4 SQ16 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @arg @ref LL_ADC_REG_RANK_9 + * @arg @ref LL_ADC_REG_RANK_10 + * @arg @ref LL_ADC_REG_RANK_11 + * @arg @ref LL_ADC_REG_RANK_12 + * @arg @ref LL_ADC_REG_RANK_13 + * @arg @ref LL_ADC_REG_RANK_14 + * @arg @ref LL_ADC_REG_RANK_15 + * @arg @ref LL_ADC_REG_RANK_16 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register and register position depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, + ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS)); + + MODIFY_REG(*preg, + ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll SQR1 SQ1 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ2 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ3 LL_ADC_REG_GetSequencerRanks\n + * SQR1 SQ4 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ5 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ6 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ7 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ8 LL_ADC_REG_GetSequencerRanks\n + * SQR2 SQ9 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ10 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ11 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ12 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ13 LL_ADC_REG_GetSequencerRanks\n + * SQR3 SQ14 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ15 LL_ADC_REG_GetSequencerRanks\n + * SQR4 SQ16 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @arg @ref LL_ADC_REG_RANK_9 + * @arg @ref LL_ADC_REG_RANK_10 + * @arg @ref LL_ADC_REG_RANK_11 + * @arg @ref LL_ADC_REG_RANK_12 + * @arg @ref LL_ADC_REG_RANK_13 + * @arg @ref LL_ADC_REG_RANK_14 + * @arg @ref LL_ADC_REG_RANK_15 + * @arg @ref LL_ADC_REG_RANK_16 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (2) + * @arg @ref LL_ADC_CHANNEL_5 (2) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1)(3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(3) + * @arg @ref LL_ADC_CHANNEL_VBAT (1)(3) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (2) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, + ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS)); + + return (uint32_t)((READ_BIT(*preg, + ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CFGR CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note For devices with several ADC instances: ADC multimode DMA + * settings are available using function @ref LL_ADC_SetMultiDMATransfer(). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR DMAEN LL_ADC_REG_SetDMATransfer\n + * CFGR DMACFG LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_DMAEN | ADC_CFGR_DMACFG, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note For devices with several ADC instances: ADC multimode DMA + * settings are available using function @ref LL_ADC_GetMultiDMATransfer(). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CFGR DMAEN LL_ADC_REG_GetDMATransfer\n + * CFGR DMACFG LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DMAEN | ADC_CFGR_DMACFG)); +} + +/** + * @brief Set ADC group regular conversion data transfer to MDF (ADF). + * @note MDF transfer cannot be used if DMA transfer is enabled. + * @note To configure MDF source address (peripheral address), + * use the same function as for DMA transfer: + * function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR ADFCFG LL_ADC_REG_GetMDFTransfer + * @param ADCx ADC instance + * @param MDFTransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_MDF_TRANSFER_NONE + * @arg @ref LL_ADC_REG_MDF_TRANSFER_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetMDFTransfer(ADC_TypeDef *ADCx, uint32_t MDFTransfer) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_ADFCFG, MDFTransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer to MDF (ADF). + * @rmtoll CFGR ADFCFG LL_ADC_REG_GetMDFTransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_MDF_TRANSFER_NONE + * @arg @ref LL_ADC_REG_MDF_TRANSFER_ENABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetMDFTransfer(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_ADFCFG)); +} + +/** + * @brief Set ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @note Compatibility with devices without feature overrun: + * other devices without this feature have a behavior + * equivalent to data overwritten. + * The default setting of overrun is data preserved. + * Therefore, for compatibility with all devices, parameter + * overrun should be set to data overwritten. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR OVRMOD LL_ADC_REG_SetOverrun + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_OVRMOD, Overrun); +} + +/** + * @brief Get ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @rmtoll CFGR OVRMOD LL_ADC_REG_GetOverrun + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_OVRMOD)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Injected Configuration of ADC hierarchical scope: group injected + * @{ + */ + +/** + * @brief Set ADC group injected conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 series having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_INJ_SetTriggerEdge(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must not be disabled. Can be enabled with or without conversion + * on going on either groups regular or injected. + * @rmtoll JSQR JEXTSEL LL_ADC_INJ_SetTriggerSource\n + * JSQR JEXTEN LL_ADC_INJ_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM12_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH3 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1 + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->JSQR, ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN, TriggerSource); +} + +/** + * @brief Get ADC group injected conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group injected trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_INJ_GetTriggerSource(ADC1) == LL_ADC_INJ_TRIG_SOFTWARE)") + * use function @ref LL_ADC_INJ_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll JSQR JEXTSEL LL_ADC_INJ_GetTriggerSource\n + * JSQR JEXTEN LL_ADC_INJ_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM12_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH3 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1 + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerSource(const ADC_TypeDef *ADCx) +{ + __IO uint32_t trigger_source = READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_JSQR_JEXTEN {0; 1; 2; 3}. */ + uint32_t shift_jexten = ((trigger_source & ADC_JSQR_JEXTEN) >> (ADC_INJ_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_JSQR_JEXTEN and ADC_JSQR_JEXTSEL */ + /* to match with triggers literals definition. */ + return ((trigger_source + & (ADC_INJ_TRIG_SOURCE_MASK >> shift_jexten) & ADC_JSQR_JEXTSEL) + | ((ADC_INJ_TRIG_EDGE_MASK >> shift_jexten) & ADC_JSQR_JEXTEN) + ); +} + +/** + * @brief Get ADC group injected conversion trigger source internal (SW start) + or external + * @note In case of group injected trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_INJ_GetTriggerSource. + * @rmtoll JSQR JEXTEN LL_ADC_INJ_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_IsTriggerSourceSWStart(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTEN) == (LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group injected conversion trigger polarity. + * Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must not be disabled. Can be enabled with or without conversion + * on going on either groups regular or injected. + * @rmtoll JSQR JEXTEN LL_ADC_INJ_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING + * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->JSQR, ADC_JSQR_JEXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group injected conversion trigger polarity. + * Applicable only for trigger source set to external trigger. + * @rmtoll JSQR JEXTEN LL_ADC_INJ_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING + * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTriggerEdge(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JEXTEN)); +} + +/** + * @brief Set ADC group injected sequencer length and scan direction. + * @note This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must not be disabled. Can be enabled with or without conversion + * on going on either groups regular or injected. + * @rmtoll JSQR JL LL_ADC_INJ_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + MODIFY_REG(ADCx->JSQR, ADC_JSQR_JL, SequencerNbRanks); +} + +/** + * @brief Get ADC group injected sequencer length and scan direction. + * @note This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll JSQR JL LL_ADC_INJ_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerLength(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->JSQR, ADC_JSQR_JL)); +} + +/** + * @brief Set ADC group injected sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group injected + * auto-injected mode and sequencer discontinuous mode. + * @rmtoll CFGR JDISCEN LL_ADC_INJ_SetSequencerDiscont + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_JDISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group injected sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR JDISCEN LL_ADC_INJ_GetSequencerDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JDISCEN)); +} + +/** + * @brief Set ADC group injected sequence: channel on the selected + * sequence rank. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32H7RS, some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN0..5). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must not be disabled. Can be enabled with or without conversion + * on going on either groups regular or injected. + * @rmtoll JSQR JSQ1 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ2 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ3 LL_ADC_INJ_SetSequencerRanks\n + * JSQR JSQ4 LL_ADC_INJ_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->JSQR, + (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (Rank & ADC_INJ_RANK_ID_JSQR_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)); +} + +/** + * @brief Get ADC group injected sequence: channel on the selected + * sequence rank. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll JSQR JSQ1 LL_ADC_INJ_GetSequencerRanks\n + * JSQR JSQ2 LL_ADC_INJ_GetSequencerRanks\n + * JSQR JSQ3 LL_ADC_INJ_GetSequencerRanks\n + * JSQR JSQ4 LL_ADC_INJ_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (2) + * @arg @ref LL_ADC_CHANNEL_1 (2) + * @arg @ref LL_ADC_CHANNEL_2 (2) + * @arg @ref LL_ADC_CHANNEL_3 (2) + * @arg @ref LL_ADC_CHANNEL_4 (2) + * @arg @ref LL_ADC_CHANNEL_5 (2) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1)(3) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1)(3) + * @arg @ref LL_ADC_CHANNEL_VBAT (1)(3) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (2) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * (3) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)((READ_BIT(ADCx->JSQR, + (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) + >> (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS + ); +} + +/** + * @brief Set ADC group injected conversion trigger: + * independent or from ADC group regular. + * @note This mode can be used to extend number of data registers + * updated after one ADC conversion trigger and with data + * permanently kept (not erased by successive conversions of scan of + * ADC sequencer ranks), up to 5 data registers: + * 1 data register on ADC group regular, 4 data registers + * on ADC group injected. + * @note If ADC group injected injected trigger source is set to an + * external trigger, this feature must be must be set to + * independent trigger. + * ADC group injected automatic trigger is compliant only with + * group injected trigger source set to SW start, without any + * further action on ADC group injected conversion start or stop: + * in this case, ADC group injected is controlled only + * from ADC group regular. + * @note It is not possible to enable both ADC group injected + * auto-injected mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR JAUTO LL_ADC_INJ_SetTrigAuto + * @param ADCx ADC instance + * @param TrigAuto This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT + * @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetTrigAuto(ADC_TypeDef *ADCx, uint32_t TrigAuto) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_JAUTO, TrigAuto); +} + +/** + * @brief Get ADC group injected conversion trigger: + * independent or from ADC group regular. + * @rmtoll CFGR JAUTO LL_ADC_INJ_GetTrigAuto + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_INDEPENDENT + * @arg @ref LL_ADC_INJ_TRIG_FROM_GRP_REGULAR + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetTrigAuto(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JAUTO)); +} + +/** + * @brief Set ADC group injected contexts queue mode. + * @note A context is a setting of group injected sequencer: + * - group injected trigger + * - sequencer length + * - sequencer ranks + * If contexts queue is disabled: + * - only 1 sequence can be configured + * and is active perpetually. + * If contexts queue is enabled: + * - up to 2 contexts can be queued + * and are checked in and out as a FIFO stack (first-in, first-out). + * - If a new context is set when queues is full, error is triggered + * by interruption "Injected Queue Overflow". + * - Two behaviors are possible when all contexts have been processed: + * the contexts queue can maintain the last context active perpetually + * or can be empty and injected group triggers are disabled. + * - Triggers can be only external (not internal SW start) + * - Caution: The sequence must be fully configured in one time + * (one write of register JSQR makes a check-in of a new context + * into the queue). + * Therefore functions to set separately injected trigger and + * sequencer channels cannot be used, register JSQR must be set + * using function @ref LL_ADC_INJ_ConfigQueueContext(). + * @note This parameter can be modified only when no conversion is on going + * on either groups regular or injected. + * @note A modification of the context mode (bit JQDIS) causes the contexts + * queue to be flushed and the register JSQR is cleared. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR JQM LL_ADC_INJ_SetQueueMode\n + * CFGR JQDIS LL_ADC_INJ_SetQueueMode + * @param ADCx ADC instance + * @param QueueMode This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_QUEUE_DISABLE + * @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE + * @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_SetQueueMode(ADC_TypeDef *ADCx, uint32_t QueueMode) +{ + MODIFY_REG(ADCx->CFGR, ADC_CFGR_JQM | ADC_CFGR_JQDIS, QueueMode); +} + +/** + * @brief Get ADC group injected context queue mode. + * @rmtoll CFGR JQM LL_ADC_INJ_GetQueueMode\n + * CFGR JQDIS LL_ADC_INJ_GetQueueMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_INJ_QUEUE_DISABLE + * @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_LAST_ACTIVE + * @arg @ref LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_JQM | ADC_CFGR_JQDIS)); +} + +/** + * @brief Set one context on ADC group injected that will be checked in + * contexts queue. + * @note A context is a setting of group injected sequencer: + * - group injected trigger + * - sequencer length + * - sequencer ranks + * This function is intended to be used when contexts queue is enabled, + * because the sequence must be fully configured in one time + * (functions to set separately injected trigger and sequencer channels + * cannot be used): + * Refer to function @ref LL_ADC_INJ_SetQueueMode(). + * @note In the contexts queue, only the active context can be read. + * The parameters of this function can be read using functions: + * @arg @ref LL_ADC_INJ_GetTriggerSource() + * @arg @ref LL_ADC_INJ_GetTriggerEdge() + * @arg @ref LL_ADC_INJ_GetSequencerRanks() + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32H7RS, some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN0..5). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must not be disabled. Can be enabled with or without conversion + * on going on either groups regular or injected. + * @rmtoll JSQR JEXTSEL LL_ADC_INJ_ConfigQueueContext\n + * JSQR JEXTEN LL_ADC_INJ_ConfigQueueContext\n + * JSQR JL LL_ADC_INJ_ConfigQueueContext\n + * JSQR JSQ1 LL_ADC_INJ_ConfigQueueContext\n + * JSQR JSQ2 LL_ADC_INJ_ConfigQueueContext\n + * JSQR JSQ3 LL_ADC_INJ_ConfigQueueContext\n + * JSQR JSQ4 LL_ADC_INJ_ConfigQueueContext + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_SOFTWARE + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM2_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH4 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_EXTI_LINE15 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM12_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM9_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH3 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM3_CH1 + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_TIM15_TRGO + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2 + * @arg @ref LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1 + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISING + * @arg @ref LL_ADC_INJ_TRIG_EXT_FALLING + * @arg @ref LL_ADC_INJ_TRIG_EXT_RISINGFALLING + * + * Note: This parameter is discarded in case of SW start: + * parameter "TriggerSource" set to "LL_ADC_INJ_TRIG_SOFTWARE". + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS + * @param Rank1_Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @param Rank2_Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @param Rank3_Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @param Rank4_Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_ConfigQueueContext(ADC_TypeDef *ADCx, + uint32_t TriggerSource, + uint32_t ExternalTriggerEdge, + uint32_t SequencerNbRanks, + uint32_t Rank1_Channel, + uint32_t Rank2_Channel, + uint32_t Rank3_Channel, + uint32_t Rank4_Channel) +{ + /* Set bits with content of parameter "Rankx_Channel" with bits position */ + /* in register depending on literal "LL_ADC_INJ_RANK_x". */ + /* Parameters "Rankx_Channel" and "LL_ADC_INJ_RANK_x" are used with masks */ + /* because containing other bits reserved for other purpose. */ + /* If parameter "TriggerSource" is set to SW start, then parameter */ + /* "ExternalTriggerEdge" is discarded. */ + uint32_t is_trigger_not_sw = (uint32_t)((TriggerSource != LL_ADC_INJ_TRIG_SOFTWARE) ? 1UL : 0UL); + MODIFY_REG(ADCx->JSQR, + ADC_JSQR_JEXTSEL | + ADC_JSQR_JEXTEN | + ADC_JSQR_JSQ4 | + ADC_JSQR_JSQ3 | + ADC_JSQR_JSQ2 | + ADC_JSQR_JSQ1 | + ADC_JSQR_JL, + (TriggerSource & ADC_JSQR_JEXTSEL) | + (ExternalTriggerEdge * (is_trigger_not_sw)) | + (((Rank4_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (LL_ADC_INJ_RANK_4 & ADC_INJ_RANK_ID_JSQR_MASK)) | + (((Rank3_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (LL_ADC_INJ_RANK_3 & ADC_INJ_RANK_ID_JSQR_MASK)) | + (((Rank2_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (LL_ADC_INJ_RANK_2 & ADC_INJ_RANK_ID_JSQR_MASK)) | + (((Rank1_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + << (LL_ADC_INJ_RANK_1 & ADC_INJ_RANK_ID_JSQR_MASK)) | + SequencerNbRanks + ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll SMPR1 SMP0 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP1 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP2 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP3 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP4 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP5 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP6 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP7 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP8 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP9 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_2CYCLES_5 (1) + * @arg @ref LL_ADC_SAMPLINGTIME_6CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_24CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_47CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_92CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_247CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_640CYCLES_5 + * + * (1) On some devices, ADC sampling time 2.5 ADC clock cycles + * can be replaced by 3.5 ADC clock cycles. + * Refer to function @ref LL_ADC_SetSamplingTimeCommonConfig(). + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTime) +{ + /* Set bits with content of parameter "SamplingTime" with bits position */ + /* in register and register position depending on parameter "Channel". */ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, + ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) >> ADC_SMPRX_REGOFFSET_POS)); + + MODIFY_REG(*preg, + ADC_SMPR1_SMP0 << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS), + SamplingTime << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS)); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @rmtoll SMPR1 SMP0 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP1 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP2 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP3 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP4 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP5 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP6 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP7 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP8 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP9 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 (3) + * @arg @ref LL_ADC_CHANNEL_1 (3) + * @arg @ref LL_ADC_CHANNEL_2 (3) + * @arg @ref LL_ADC_CHANNEL_3 (3) + * @arg @ref LL_ADC_CHANNEL_4 (3) + * @arg @ref LL_ADC_CHANNEL_5 (3) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (1) + * @arg @ref LL_ADC_CHANNEL_VBAT (1) + * + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * (3) On STM32H7RS, fast channel allows: 2.5 (sampling) + 12.5 (conversion 12b) = 15 ADC clock cycles (fADC) + * Other channels are slow channels: 6.5 (sampling) + 12.5 (conversion 12b) = 19 ADC clock cycles (fADC) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_2CYCLES_5 (1) + * @arg @ref LL_ADC_SAMPLINGTIME_6CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_24CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_47CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_92CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_247CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_640CYCLES_5 + * + * (1) On some devices, ADC sampling time 2.5 ADC clock cycles + * can be replaced by 3.5 ADC clock cycles. + * Refer to function @ref LL_ADC_SetSamplingTimeCommonConfig(). + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(const ADC_TypeDef *ADCx, uint32_t Channel) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) + >> ADC_SMPRX_REGOFFSET_POS)); + + return (uint32_t)(READ_BIT(*preg, + ADC_SMPR1_SMP0 + << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS)) + >> ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS) + ); +} + +/** + * @brief Set mode single-ended or differential input of the selected + * ADC channel. + * @note Channel ending is on channel scope: independently of channel mapped + * on ADC group regular or injected. + * In differential mode: Differential measurement is carried out + * between the selected channel 'i' (positive input) and + * channel 'i+1' (negative input). Only channel 'i' has to be + * configured, channel 'i+1' is configured automatically. + * @note Refer to Reference Manual to ensure the selected channel is + * available in differential mode. + * For example, internal channels (VrefInt, TempSensor, ...) are + * not available in differential mode. + * @note When configuring a channel 'i' in differential mode, + * the channel 'i+1' is not usable separately. + * @note Channels 0, 5, 6, 7, 9, 13, 14, 15, 16, 17, 18 + * are internally fixed to single-ended inputs configuration. + * @note For ADC channels configured in differential mode, both inputs + * should be biased at (Vref+)/2 +/-200mV. + * (Vref+ is the analog voltage reference) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll DIFSEL DIFSEL LL_ADC_SetChannelSingleDiff + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @param SingleDiff This parameter can be a combination of the following values: + * @arg @ref LL_ADC_SINGLE_ENDED + * @arg @ref LL_ADC_DIFFERENTIAL_ENDED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSingleDiff(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SingleDiff) +{ + /* Bits of channels in single or differential mode are set only for */ + /* differential mode (for single mode, mask of bits allowed to be set is */ + /* shifted out of range of bits of channels in single or differential mode. */ + MODIFY_REG(ADCx->DIFSEL, + Channel & ADC_SINGLEDIFF_CHANNEL_MASK, + (Channel & ADC_SINGLEDIFF_CHANNEL_MASK) + & (ADC_DIFSEL_DIFSEL >> (SingleDiff & ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK))); +} + +/** + * @brief Get mode single-ended or differential input of the selected + * ADC channel. + * @note When configuring a channel 'i' in differential mode, + * the channel 'i+1' is not usable separately. + * Therefore, to ensure a channel is configured in single-ended mode, + * the configuration of channel itself and the channel 'i-1' must be + * read back (to ensure that the selected channel channel has not been + * configured in differential mode by the previous channel). + * @note Refer to Reference Manual to ensure the selected channel is + * available in differential mode. + * For example, internal channels (VrefInt, TempSensor, ...) are + * not available in differential mode. + * @note When configuring a channel 'i' in differential mode, + * the channel 'i+1' is not usable separately. + * @note Channels 0, 5, 6, 7, 9, 13, 14, 15, 16, 17, 18 + * are internally fixed to single-ended inputs configuration. + * @note One or several values can be selected. In this case, the value + * returned is null if all channels are in single ended-mode. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll DIFSEL DIFSEL LL_ADC_GetChannelSingleDiff + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @retval 0: channel in single-ended mode, else: channel in differential mode + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSingleDiff(const ADC_TypeDef *ADCx, uint32_t Channel) +{ + return (uint32_t)(READ_BIT(ADCx->DIFSEL, (Channel & ADC_SINGLEDIFF_CHANNEL_MASK))); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel, multiple channels or all channels, + * on ADC groups regular and-or injected. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is limited to 8 bits: if ADC resolution is + * 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits + * the 2 LSB are ignored. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CFGR AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CFGR AWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * CFGR JAWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_SetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) + * + * (0) On STM32H7RS, parameter available only on analog watchdog number: AWD1.\n + * (1) On STM32H7RS, parameter available only on ADC instance: ADC1.\n + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) +{ + /* Set bits with content of parameter "AWDChannelGroup" with bits position */ + /* in register and register position depending on parameter "AWDy". */ + /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, + ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) + * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + MODIFY_REG(*preg, + (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & AWDy); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is limited to 8 bits: if ADC resolution is + * 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits + * the 2 LSB are ignored. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CFGR AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CFGR AWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * CFGR JAWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_GetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On this AWD number, monitored channel can be retrieved + * if only 1 channel is programmed (or none or all channels). + * This function cannot retrieve monitored channel if + * multiple channels are programmed simultaneously + * by bitfield. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * + * (0) On STM32H7RS, parameter available only on analog watchdog number: AWD1. + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(const ADC_TypeDef *ADCx, uint32_t AWDy) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, + ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) + * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + uint32_t analog_wd_monit_channels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "analog_wd_monit_channels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if (analog_wd_monit_channels != 0UL) + { + if (AWDy == LL_ADC_AWD1) + { + if ((analog_wd_monit_channels & ADC_CFGR_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = ((analog_wd_monit_channels + | (ADC_AWD_CR23_CHANNEL_MASK) + ) + & (~(ADC_CFGR_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + analog_wd_monit_channels = (analog_wd_monit_channels + | (ADC_AWD2CR_AWD2CH_0 << (analog_wd_monit_channels >> ADC_CFGR_AWD1CH_Pos)) + ); + } + } + else + { + if ((analog_wd_monit_channels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + { + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = (ADC_AWD_CR23_CHANNEL_MASK + | ((ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN)) + ); + } + else + { + /* AWD monitoring a single channel */ + /* AWD monitoring a group of channels */ + analog_wd_monit_channels = (analog_wd_monit_channels + | (ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) + | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(analog_wd_monit_channels) << ADC_CFGR_AWD1CH_Pos) + ); + } + } + } + + return analog_wd_monit_channels; +} + +/** + * @brief Set ADC analog watchdog thresholds value of both thresholds + * high and low. + * @note If value of only one threshold high or low must be set, + * use function @ref LL_ADC_SetAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is limited to 8 bits: if ADC resolution is + * 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits + * the 2 LSB are ignored. + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @rmtoll TR1 HT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 HT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 HT3 LL_ADC_ConfigAnalogWDThresholds\n + * TR1 LT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 LT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 LT3 LL_ADC_ConfigAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) +{ + /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ + /* position in register and register position depending on parameter */ + /* "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); + + MODIFY_REG(*preg, + ADC_TR1_HT1 | ADC_TR1_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +} + +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note If values of both thresholds high or low must be set, + * use function @ref LL_ADC_ConfigAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there are 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC groups regular and-or injected. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is limited to 8 bits: if ADC resolution is + * 12 bits the 4 LSB are ignored, if ADC resolution is 10 bits + * the 2 LSB are ignored. + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is not conditioned to + * ADC state: + * ADC can be disabled, enabled with or without conversion on going + * on either ADC groups regular or injected. + * @rmtoll TR1 HT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_SetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); + + MODIFY_REG(*preg, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high, + * threshold low or raw data with ADC thresholds high and low + * concatenated. + * @note If raw data with ADC thresholds high and low is retrieved, + * the data of each threshold high or low can be isolated + * using helper macro: + * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(const ADC_TypeDef *ADCx, + uint32_t AWDy, uint32_t AWDThresholdsHighLow) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); + + return (uint32_t)(READ_BIT(*preg, + (AWDThresholdsHighLow | ADC_TR1_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) + & ~(AWDThresholdsHighLow & ADC_TR1_LT1))); +} + +/** + * @brief Set ADC analog watchdog filtering configuration + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @note On this STM32 series, this feature is only available on first + * analog watchdog (AWD1) + * @rmtoll TR1 AWDFILT LL_ADC_SetAWDFilteringConfiguration + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @param FilteringConfig This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_FILTERING_NONE + * @arg @ref LL_ADC_AWD_FILTERING_2SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_3SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_4SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_5SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_6SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_7SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_8SAMPLES + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAWDFilteringConfiguration(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t FilteringConfig) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + MODIFY_REG(ADCx->TR1, ADC_TR1_AWDFILT, FilteringConfig); +} + +/** + * @brief Get ADC analog watchdog filtering configuration + * @note On this STM32 series, this feature is only available on first + * analog watchdog (AWD1) + * @rmtoll TR1 AWDFILT LL_ADC_GetAWDFilteringConfiguration + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @retval Returned value can be: + * @arg @ref LL_ADC_AWD_FILTERING_NONE + * @arg @ref LL_ADC_AWD_FILTERING_2SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_3SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_4SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_5SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_6SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_7SAMPLES + * @arg @ref LL_ADC_AWD_FILTERING_8SAMPLES + */ +__STATIC_INLINE uint32_t LL_ADC_GetAWDFilteringConfiguration(const ADC_TypeDef *ADCx, uint32_t AWDy) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + return (uint32_t)(READ_BIT(ADCx->TR1, ADC_TR1_AWDFILT)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling + * @{ + */ + +/** + * @brief Set ADC oversampling scope: ADC groups regular and-or injected + * (availability of ADC group injected depends on STM32 series). + * @note If both groups regular and injected are selected, + * specify behavior of ADC group injected interrupting + * group regular: when ADC group injected is triggered, + * the oversampling on ADC group regular is either + * temporary stopped and continued, or resumed from start + * (oversampler buffer reset). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR2 ROVSE LL_ADC_SetOverSamplingScope\n + * CFGR2 JOVSE LL_ADC_SetOverSamplingScope\n + * CFGR2 ROVSM LL_ADC_SetOverSamplingScope + * @param ADCx ADC instance + * @param OvsScope This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED + * @arg @ref LL_ADC_OVS_GRP_INJECTED + * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSM, OvsScope); +} + +/** + * @brief Get ADC oversampling scope: ADC groups regular and-or injected + * (availability of ADC group injected depends on STM32 series). + * @note If both groups regular and injected are selected, + * specify behavior of ADC group injected interrupting + * group regular: when ADC group injected is triggered, + * the oversampling on ADC group regular is either + * temporary stopped and continued, or resumed from start + * (oversampler buffer reset). + * @rmtoll CFGR2 ROVSE LL_ADC_GetOverSamplingScope\n + * CFGR2 JOVSE LL_ADC_GetOverSamplingScope\n + * CFGR2 ROVSM LL_ADC_GetOverSamplingScope + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED + * @arg @ref LL_ADC_OVS_GRP_INJECTED + * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSM)); +} + +/** + * @brief Set ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note On this STM32 series, oversampling discontinuous mode + * (triggered mode) can be used only when oversampling is + * set on group regular only and in resumed mode. + * @rmtoll CFGR2 TROVS LL_ADC_SetOverSamplingDiscont + * @param ADCx ADC instance + * @param OverSamplingDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TROVS, OverSamplingDiscont); +} + +/** + * @brief Get ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @rmtoll CFGR2 TROVS LL_ADC_GetOverSamplingDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TROVS)); +} + +/** + * @brief Set ADC oversampling + * (impacting both ADC groups regular and injected) + * @note This function set the 2 items of oversampling configuration: + * - ratio + * - shift + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CFGR2 OVSS LL_ADC_ConfigOverSamplingRatioShift\n + * CFGR2 OVSR LL_ADC_ConfigOverSamplingRatioShift + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + * @param Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint32_t Ratio, uint32_t Shift) +{ + MODIFY_REG(ADCx->CFGR2, (ADC_CFGR2_OVSS | ADC_CFGR2_OVSR), (Shift | Ratio)); +} + +/** + * @brief Get ADC oversampling ratio + * (impacting both ADC groups regular and injected) + * @rmtoll CFGR2 OVSR LL_ADC_GetOverSamplingRatio + * @param ADCx ADC instance + * @retval Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); +} + +/** + * @brief Get ADC oversampling shift + * (impacting both ADC groups regular and injected) + * @rmtoll CFGR2 OVSS LL_ADC_GetOverSamplingShift + * @param ADCx ADC instance + * @retval Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Multimode Configuration of ADC hierarchical scope: multimode + * @{ + */ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Set ADC multimode configuration to operate in independent mode + * or multimode (for devices with several ADC instances). + * @note If multimode configuration: the selected ADC instance is + * either master or slave depending on hardware. + * Refer to reference manual. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR DUAL LL_ADC_SetMultimode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param Multimode This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_INDEPENDENT + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL + * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetMultimode(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t Multimode) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DUAL, Multimode); +} + +/** + * @brief Get ADC multimode configuration to operate in independent mode + * or multimode (for devices with several ADC instances). + * @note If multimode configuration: the selected ADC instance is + * either master or slave depending on hardware. + * Refer to reference manual. + * @rmtoll CCR DUAL LL_ADC_GetMultimode + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_MULTI_INDEPENDENT + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INTERL + * @arg @ref LL_ADC_MULTI_DUAL_INJ_SIMULT + * @arg @ref LL_ADC_MULTI_DUAL_INJ_ALTERN + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM + * @arg @ref LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT + * @arg @ref LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM + */ +__STATIC_INLINE uint32_t LL_ADC_GetMultimode(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DUAL)); +} + +/** + * @brief Set ADC multimode conversion data transfer: no transfer + * or transfer by DMA. + * @note If ADC multimode transfer by DMA is not selected: + * each ADC uses its own DMA channel, with its individual + * DMA transfer settings. + * If ADC multimode transfer by DMA is selected: + * One DMA channel is used for both ADC (DMA of ADC master) + * Specifies the DMA requests mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note How to retrieve multimode conversion data: + * Whatever multimode transfer by DMA setting: using function + * @ref LL_ADC_REG_ReadMultiConversionData32(). + * If ADC multimode transfer by DMA is selected: conversion data + * is a raw data with ADC master and slave concatenated. + * A macro is available to get the conversion data of + * ADC master or ADC slave: see helper macro + * @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled + * or enabled without conversion on going on group regular. + * @rmtoll CCR MDMA LL_ADC_SetMultiDMATransfer\n + * CCR DMACFG LL_ADC_SetMultiDMATransfer + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param MultiDMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC + * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B + * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B + * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B + * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetMultiDMATransfer(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiDMATransfer) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG, MultiDMATransfer); +} + +/** + * @brief Get ADC multimode conversion data transfer: no transfer + * or transfer by DMA. + * @note If ADC multimode transfer by DMA is not selected: + * each ADC uses its own DMA channel, with its individual + * DMA transfer settings. + * If ADC multimode transfer by DMA is selected: + * One DMA channel is used for both ADC (DMA of ADC master) + * Specifies the DMA requests mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note How to retrieve multimode conversion data: + * Whatever multimode transfer by DMA setting: using function + * @ref LL_ADC_REG_ReadMultiConversionData32(). + * If ADC multimode transfer by DMA is selected: conversion data + * is a raw data with ADC master and slave concatenated. + * A macro is available to get the conversion data of + * ADC master or ADC slave: see helper macro + * @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). + * @rmtoll CCR MDMA LL_ADC_GetMultiDMATransfer\n + * CCR DMACFG LL_ADC_GetMultiDMATransfer + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_MULTI_REG_DMA_EACH_ADC + * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B + * @arg @ref LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B + * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B + * @arg @ref LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG)); +} + +/** + * @brief Set ADC multimode delay between 2 sampling phases. + * @note The sampling delay range depends on ADC resolution: + * - ADC resolution 12 bits can have maximum delay of 12 cycles. + * - ADC resolution 10 bits can have maximum delay of 10 cycles. + * - ADC resolution 8 bits can have maximum delay of 8 cycles. + * - ADC resolution 6 bits can have maximum delay of 6 cycles. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR DELAY LL_ADC_SetMultiTwoSamplingDelay + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param MultiTwoSamplingDelay This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES (1) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES (1) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (3) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (3) + * + * (1) Parameter available only if ADC resolution is 12, 10 or 8 bits.\n + * (2) Parameter available only if ADC resolution is 12 or 10 bits.\n + * (3) Parameter available only if ADC resolution is 12 bits. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetMultiTwoSamplingDelay(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiTwoSamplingDelay) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_DELAY, MultiTwoSamplingDelay); +} + +/** + * @brief Get ADC multimode delay between 2 sampling phases. + * @rmtoll CCR DELAY LL_ADC_GetMultiTwoSamplingDelay + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES (1) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES (1) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES (2) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES (3) + * @arg @ref LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES (3) + * + * (1) Parameter available only if ADC resolution is 12, 10 or 8 bits.\n + * (2) Parameter available only if ADC resolution is 12 or 10 bits.\n + * (3) Parameter available only if ADC resolution is 12 bits. + */ +__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_DELAY)); +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Put ADC instance in deep power down state. + * @note In case of ADC calibration necessary: When ADC is in deep-power-down + * state, the internal analog calibration is lost. After exiting from + * deep power down, calibration must be relaunched or calibration factor + * (preliminarily saved) must be set back into calibration register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR DEEPPWD LL_ADC_EnableDeepPowerDown + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableDeepPowerDown(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_DEEPPWD); +} + +/** + * @brief Disable ADC deep power down mode. + * @note In case of ADC calibration necessary: When ADC is in deep-power-down + * state, the internal analog calibration is lost. After exiting from + * deep power down, calibration must be relaunched or calibration factor + * (preliminarily saved) must be set back into calibration register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR DEEPPWD LL_ADC_DisableDeepPowerDown + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableDeepPowerDown(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + CLEAR_BIT(ADCx->CR, (ADC_CR_DEEPPWD | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance deep power down state. + * @rmtoll CR DEEPPWD LL_ADC_IsDeepPowerDownEnabled + * @param ADCx ADC instance + * @retval 0: deep power down is disabled, 1: deep power down is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDeepPowerDownEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_DEEPPWD) == (ADC_CR_DEEPPWD)) ? 1UL : 0UL); +} + +/** + * @brief Enable ADC instance internal voltage regulator. + * @note On this STM32 series, after ADC internal voltage regulator enable, + * a delay for ADC internal voltage regulator stabilization + * is required before performing a ADC calibration or ADC enable. + * Refer to device datasheet, parameter tADCVREG_STUP. + * Refer to literal @ref LL_ADC_DELAY_INTERNAL_REGUL_STAB_US. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_EnableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableInternalRegulator(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADVREGEN); +} + +/** + * @brief Disable ADC internal voltage regulator. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_DisableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableInternalRegulator(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR, (ADC_CR_ADVREGEN | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance internal voltage regulator state. + * @rmtoll CR ADVREGEN LL_ADC_IsInternalRegulatorEnabled + * @param ADCx ADC instance + * @retval 0: internal regulator is disabled, 1: internal regulator is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 series, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled and ADC internal voltage regulator enabled. + * @rmtoll CR ADEN LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADEN); +} + +/** + * @brief Disable the selected ADC instance. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be not disabled. Must be enabled without conversion on going + * on either groups regular or injected. + * @rmtoll CR ADDIS LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADDIS); +} + +/** + * @brief Get the selected ADC instance enable state. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll CR ADEN LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the selected ADC instance disable state. + * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing + * @param ADCx ADC instance + * @retval 0: no ADC disable command on going. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 series, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * (calibration run must be performed for each of these + * differential modes, if used afterwards and if the application + * requires their calibration). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration\n + * CR ADCALDIF LL_ADC_StartCalibration + * @param ADCx ADC instance + * @param SingleDiff This parameter can be one of the following values: + * @arg @ref LL_ADC_SINGLE_ENDED + * @arg @ref LL_ADC_DIFFERENTIAL_ENDED + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx, uint32_t SingleDiff) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_ADCALDIF | ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL | (SingleDiff & ADC_SINGLEDIFF_CALIB_START_MASK)); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTART LL_ADC_REG_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTART); +} + +/** + * @brief Stop ADC group regular conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled with conversion on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTP LL_ADC_REG_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTP); +} + +/** + * @brief Get ADC group regular conversion state. + * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular command of conversion stop state + * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC sampling phase for sampling time trigger mode + * @note This function is relevant only when + * - @ref LL_ADC_REG_SAMPLING_MODE_TRIGGER_CONTROLED has been set + * using @ref LL_ADC_REG_SetSamplingMode + * - @ref LL_ADC_REG_TRIG_SOFTWARE is used as trigger source + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CFGR2 SWTRIG LL_ADC_REG_StartSamplingPhase + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartSamplingPhase(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CFGR2, ADC_CFGR2_SWTRIG); +} + +/** + * @brief Stop ADC sampling phase for sampling time trigger mode and start conversion + * @note This function is relevant only when + * - @ref LL_ADC_REG_SAMPLING_MODE_TRIGGER_CONTROLED has been set + * using @ref LL_ADC_REG_SetSamplingMode + * - @ref LL_ADC_REG_TRIG_SOFTWARE is used as trigger source + * - @ref LL_ADC_REG_StartSamplingPhase has been called to start + * the sampling phase + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CFGR2 SWTRIG LL_ADC_REG_StopSamplingPhase + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopSamplingPhase(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CFGR2, ADC_CFGR2_SWTRIG); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(const ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(const ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(const ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR RDATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(const ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_RDATA)); +} + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Get ADC multimode conversion data of ADC master, ADC slave + * or raw data with ADC master and slave concatenated. + * @note If raw data with ADC master and slave concatenated is retrieved, + * a macro is available to get the conversion data of + * ADC master or ADC slave: see helper macro + * @ref __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). + * (however this macro is mainly intended for multimode + * transfer by DMA, because this function can do the same + * by getting multimode conversion data of ADC master or ADC slave + * separately). + * @rmtoll CDR RDATA_MST LL_ADC_REG_ReadMultiConversionData32\n + * CDR RDATA_SLV LL_ADC_REG_ReadMultiConversionData32 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param ConversionData This parameter can be one of the following values: + * @arg @ref LL_ADC_MULTI_MASTER + * @arg @ref LL_ADC_MULTI_SLAVE + * @arg @ref LL_ADC_MULTI_MASTER_SLAVE + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32(const ADC_Common_TypeDef *ADCxy_COMMON, + uint32_t ConversionData) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CDR, + ConversionData) + >> (POSITION_VAL(ConversionData) & 0x1FUL) + ); +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Injected Operation on ADC hierarchical scope: group injected + * @{ + */ + +/** + * @brief Start ADC group injected conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group injected, + * without conversion stop command on going on group injected, + * without ADC disable command on going. + * @rmtoll CR JADSTART LL_ADC_INJ_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_JADSTART); +} + +/** + * @brief Stop ADC group injected conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled with conversion on going on group injected, + * without ADC disable command on going. + * @rmtoll CR JADSTP LL_ADC_INJ_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_INJ_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_JADSTP); +} + +/** + * @brief Get ADC group injected conversion state. + * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group injected. + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_IsConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_JADSTART) == (ADC_CR_JADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group injected command of conversion stop state + * @rmtoll CR JADSTP LL_ADC_INJ_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group injected. + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_IsStopConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_JADSTP) == (ADC_CR_JADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData32\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData32 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_INJ_ReadConversionData32(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, + ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS)); + + return (uint32_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData12\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData12 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData12(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, + ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS)); + + return (uint16_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData10\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData10 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_INJ_ReadConversionData10(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, + ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS)); + + return (uint16_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData8\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData8 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData8(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, + ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS)); + + return (uint8_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @brief Get ADC group injected conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_INJ_ReadConversionData32. + * @rmtoll JDR1 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR2 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR3 JDATA LL_ADC_INJ_ReadConversionData6\n + * JDR4 JDATA LL_ADC_INJ_ReadConversionData6 + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_INJ_RANK_1 + * @arg @ref LL_ADC_INJ_RANK_2 + * @arg @ref LL_ADC_INJ_RANK_3 + * @arg @ref LL_ADC_INJ_RANK_4 + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->JDR1, + ((Rank & ADC_INJ_JDRX_REGOFFSET_MASK) >> ADC_JDRX_REGOFFSET_POS)); + + return (uint8_t)(READ_BIT(*preg, + ADC_JDR1_JDATA) + ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group injected end of unitary conversion. + * @rmtoll ISR JEOC LL_ADC_IsActiveFlag_JEOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JEOC) == (LL_ADC_FLAG_JEOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group injected end of sequence conversions. + * @rmtoll ISR JEOS LL_ADC_IsActiveFlag_JEOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JEOS) == (LL_ADC_FLAG_JEOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group injected contexts queue overflow. + * @rmtoll ISR JQOVF LL_ADC_IsActiveFlag_JQOVF + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JQOVF(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JQOVF) == (LL_ADC_FLAG_JQOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_IsActiveFlag_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_IsActiveFlag_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Clear flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC); +} + +/** + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR); +} + +/** + * @brief Clear flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); +} + +/** + * @brief Clear flag ADC group injected end of unitary conversion. + * @rmtoll ISR JEOC LL_ADC_ClearFlag_JEOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_JEOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_JEOC); +} + +/** + * @brief Clear flag ADC group injected end of sequence conversions. + * @rmtoll ISR JEOS LL_ADC_ClearFlag_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_JEOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_JEOS); +} + +/** + * @brief Clear flag ADC group injected contexts queue overflow. + * @rmtoll ISR JQOVF LL_ADC_ClearFlag_JQOVF + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_JQOVF(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_JQOVF); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1); +} + +/** + * @brief Clear flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_ClearFlag_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD2(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD2); +} + +/** + * @brief Clear flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_ClearFlag_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); +} + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Get flag multimode ADC ready of the ADC master. + * @rmtoll CSR ADRDY_MST LL_ADC_IsActiveFlag_MST_ADRDY + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_ADRDY(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_ADRDY_MST) == (LL_ADC_FLAG_ADRDY_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC ready of the ADC slave. + * @rmtoll CSR ADRDY_SLV LL_ADC_IsActiveFlag_SLV_ADRDY + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_ADRDY(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_ADRDY_SLV) == (LL_ADC_FLAG_ADRDY_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of unitary conversion of the ADC master. + * @rmtoll CSR EOC_MST LL_ADC_IsActiveFlag_MST_EOC + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOC(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOC_SLV) == (LL_ADC_FLAG_EOC_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of unitary conversion of the ADC slave. + * @rmtoll CSR EOC_SLV LL_ADC_IsActiveFlag_SLV_EOC + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOC(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOC_SLV) == (LL_ADC_FLAG_EOC_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of sequence conversions of the ADC master. + * @rmtoll CSR EOS_MST LL_ADC_IsActiveFlag_MST_EOS + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOS(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOS_MST) == (LL_ADC_FLAG_EOS_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of sequence conversions of the ADC slave. + * @rmtoll CSR EOS_SLV LL_ADC_IsActiveFlag_SLV_EOS + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOS(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOS_SLV) == (LL_ADC_FLAG_EOS_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular overrun of the ADC master. + * @rmtoll CSR OVR_MST LL_ADC_IsActiveFlag_MST_OVR + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_OVR(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_MST) == (LL_ADC_FLAG_OVR_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular overrun of the ADC slave. + * @rmtoll CSR OVR_SLV LL_ADC_IsActiveFlag_SLV_OVR + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_OVR(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_OVR_SLV) == (LL_ADC_FLAG_OVR_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of sampling of the ADC master. + * @rmtoll CSR EOSMP_MST LL_ADC_IsActiveFlag_MST_EOSMP + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_EOSMP(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOSMP_MST) == (LL_ADC_FLAG_EOSMP_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group regular end of sampling of the ADC slave. + * @rmtoll CSR EOSMP_SLV LL_ADC_IsActiveFlag_SLV_EOSMP + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_EOSMP(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_EOSMP_SLV) == (LL_ADC_FLAG_EOSMP_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected end of unitary conversion of the ADC master. + * @rmtoll CSR JEOC_MST LL_ADC_IsActiveFlag_MST_JEOC + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOC(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOC_MST) == (LL_ADC_FLAG_JEOC_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected end of unitary conversion of the ADC slave. + * @rmtoll CSR JEOC_SLV LL_ADC_IsActiveFlag_SLV_JEOC + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOC(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOC_SLV) == (LL_ADC_FLAG_JEOC_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC master. + * @rmtoll CSR JEOS_MST LL_ADC_IsActiveFlag_MST_JEOS + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOS_MST) == (LL_ADC_FLAG_JEOS_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected end of sequence conversions of the ADC slave. + * @rmtoll CSR JEOS_SLV LL_ADC_IsActiveFlag_SLV_JEOS + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JEOS(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JEOS_SLV) == (LL_ADC_FLAG_JEOS_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected context queue overflow of the ADC master. + * @rmtoll CSR JQOVF_MST LL_ADC_IsActiveFlag_MST_JQOVF + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JQOVF(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JQOVF_MST) == (LL_ADC_FLAG_JQOVF_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC group injected context queue overflow of the ADC slave. + * @rmtoll CSR JQOVF_SLV LL_ADC_IsActiveFlag_SLV_JQOVF + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_JQOVF(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_JQOVF_SLV) == (LL_ADC_FLAG_JQOVF_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC analog watchdog 1 of the ADC master. + * @rmtoll CSR AWD1_MST LL_ADC_IsActiveFlag_MST_AWD1 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD1(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_MST) == (LL_ADC_FLAG_AWD1_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode analog watchdog 1 of the ADC slave. + * @rmtoll CSR AWD1_SLV LL_ADC_IsActiveFlag_SLV_AWD1 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD1(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD1_SLV) == (LL_ADC_FLAG_AWD1_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC analog watchdog 2 of the ADC master. + * @rmtoll CSR AWD2_MST LL_ADC_IsActiveFlag_MST_AWD2 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD2(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD2_MST) == (LL_ADC_FLAG_AWD2_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC analog watchdog 2 of the ADC slave. + * @rmtoll CSR AWD2_SLV LL_ADC_IsActiveFlag_SLV_AWD2 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD2(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD2_SLV) == (LL_ADC_FLAG_AWD2_SLV)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC analog watchdog 3 of the ADC master. + * @rmtoll CSR AWD3_MST LL_ADC_IsActiveFlag_MST_AWD3 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_AWD3(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD3_MST) == (LL_ADC_FLAG_AWD3_MST)) ? 1UL : 0UL); +} + +/** + * @brief Get flag multimode ADC analog watchdog 3 of the ADC slave. + * @rmtoll CSR AWD3_SLV LL_ADC_IsActiveFlag_SLV_AWD3 + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV_AWD3(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + return ((READ_BIT(ADCxy_COMMON->CSR, LL_ADC_FLAG_AWD3_SLV) == (LL_ADC_FLAG_AWD3_SLV)) ? 1UL : 0UL); +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Enable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Enable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Enable interruption ADC group injected end of unitary conversion. + * @rmtoll IER JEOCIE LL_ADC_EnableIT_JEOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_JEOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_JEOC); +} + +/** + * @brief Enable interruption ADC group injected end of sequence conversions. + * @rmtoll IER JEOSIE LL_ADC_EnableIT_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_JEOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_JEOS); +} + +/** + * @brief Enable interruption ADC group injected context queue overflow. + * @rmtoll IER JQOVFIE LL_ADC_EnableIT_JQOVF + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_JQOVF(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_JQOVF); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Enable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_EnableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD2(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Enable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_EnableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Disable interruption ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Disable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER JEOCIE LL_ADC_DisableIT_JEOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_JEOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_JEOC); +} + +/** + * @brief Disable interruption ADC group injected end of sequence conversions. + * @rmtoll IER JEOSIE LL_ADC_DisableIT_JEOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_JEOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_JEOS); +} + +/** + * @brief Disable interruption ADC group injected context queue overflow. + * @rmtoll IER JQOVFIE LL_ADC_DisableIT_JQOVF + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_JQOVF(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_JQOVF); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_DisableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD2(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Disable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_DisableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Get state of interruption ADC ready + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSIE LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sampling + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group injected end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER JEOCIE LL_ADC_IsEnabledIT_JEOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_JEOC) == (LL_ADC_IT_JEOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group injected end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER JEOSIE LL_ADC_IsEnabledIT_JEOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_JEOS) == (LL_ADC_IT_JEOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group injected context queue overflow interrupt state + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER JQOVFIE LL_ADC_IsEnabledIT_JQOVF + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JQOVF(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_JQOVF) == (LL_ADC_IT_JQOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD1IE LL_ADC_IsEnabledIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 2 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD2IE LL_ADC_IsEnabledIT_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 3 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD3IE LL_ADC_IsEnabledIT_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(const ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct); + +/* De-initialization of ADC instance, ADC group regular and ADC group injected */ +/* (availability of ADC group injected depends on STM32 series) */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct); + +/* Initialization of some features of ADC instance and ADC group injected */ +ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, const LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct); +void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 || ADC2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_ADC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_bus.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_bus.h new file mode 100644 index 000000000..d345364a7 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_bus.h @@ -0,0 +1,2734 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_BUS_H +#define STM32H7RSxx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_GPDMA1 RCC_AHB1ENR_GPDMA1EN +#define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHB1ENR_ADC12EN +#define LL_AHB1_GRP1_PERIPH_ETH1MAC RCC_AHB1ENR_ETH1MACEN +#define LL_AHB1_GRP1_PERIPH_ETH1TX RCC_AHB1ENR_ETH1TXEN +#define LL_AHB1_GRP1_PERIPH_ETH1RX RCC_AHB1ENR_ETH1RXEN +#define LL_AHB1_GRP1_PERIPH_USBOTGHS RCC_AHB1ENR_OTGHSEN +#define LL_AHB1_GRP1_PERIPH_USBOTGFS RCC_AHB1ENR_OTGFSEN +#define LL_AHB1_GRP1_PERIPH_USBPHYC RCC_AHB1ENR_USBPHYCEN +#define LL_AHB1_GRP1_PERIPH_ADF1 RCC_AHB1ENR_ADF1EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH + * @{ + */ +#define LL_AHB2_GRP1_PERIPH_PSSI RCC_AHB2ENR_PSSIEN +#define LL_AHB2_GRP1_PERIPH_SDMMC2 RCC_AHB2ENR_SDMMC2EN +#define LL_AHB2_GRP1_PERIPH_CORDIC RCC_AHB2ENR_CORDICEN +#define LL_AHB2_GRP1_PERIPH_AHBSRAM1 RCC_AHB2ENR_SRAM1EN +#define LL_AHB2_GRP1_PERIPH_AHBSRAM2 RCC_AHB2ENR_SRAM2EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH + * @{ + */ +#define LL_AHB3_GRP1_PERIPH_RNG RCC_AHB3ENR_RNGEN +#define LL_AHB3_GRP1_PERIPH_HASH RCC_AHB3ENR_HASHEN +#if defined(CRYP) +#define LL_AHB3_GRP1_PERIPH_CRYP RCC_AHB3ENR_CRYPEN +#endif /* CRYP */ +#if defined(SAES) +#define LL_AHB3_GRP1_PERIPH_SAES RCC_AHB3ENR_SAESEN +#endif /* SAES */ +#define LL_AHB3_GRP1_PERIPH_PKA RCC_AHB3ENR_PKAEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB4_GRP1_PERIPH AHB4 GRP1 PERIPH + * @{ + */ +#define LL_AHB4_GRP1_PERIPH_GPIOA RCC_AHB4ENR_GPIOAEN +#define LL_AHB4_GRP1_PERIPH_GPIOB RCC_AHB4ENR_GPIOBEN +#define LL_AHB4_GRP1_PERIPH_GPIOC RCC_AHB4ENR_GPIOCEN +#define LL_AHB4_GRP1_PERIPH_GPIOD RCC_AHB4ENR_GPIODEN +#define LL_AHB4_GRP1_PERIPH_GPIOE RCC_AHB4ENR_GPIOEEN +#define LL_AHB4_GRP1_PERIPH_GPIOF RCC_AHB4ENR_GPIOFEN +#define LL_AHB4_GRP1_PERIPH_GPIOG RCC_AHB4ENR_GPIOGEN +#define LL_AHB4_GRP1_PERIPH_GPIOH RCC_AHB4ENR_GPIOHEN +#define LL_AHB4_GRP1_PERIPH_GPIOM RCC_AHB4ENR_GPIOMEN +#define LL_AHB4_GRP1_PERIPH_GPION RCC_AHB4ENR_GPIONEN +#define LL_AHB4_GRP1_PERIPH_GPIOO RCC_AHB4ENR_GPIOOEN +#define LL_AHB4_GRP1_PERIPH_GPIOP RCC_AHB4ENR_GPIOPEN +#define LL_AHB4_GRP1_PERIPH_CRC RCC_AHB4ENR_CRCEN +#define LL_AHB4_GRP1_PERIPH_BKPRAM RCC_AHB4ENR_BKPRAMEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB5_GRP1_PERIPH AHB5 GRP1 PERIPH + * @{ + */ +#define LL_AHB5_GRP1_PERIPH_HPDMA1 RCC_AHB5ENR_HPDMA1EN +#define LL_AHB5_GRP1_PERIPH_DMA2D RCC_AHB5ENR_DMA2DEN +#define LL_AHB5_GRP1_PERIPH_JPEG RCC_AHB5ENR_JPEGEN +#define LL_AHB5_GRP1_PERIPH_FMC RCC_AHB5ENR_FMCEN +#define LL_AHB5_GRP1_PERIPH_XSPI1 RCC_AHB5ENR_XSPI1EN +#define LL_AHB5_GRP1_PERIPH_XSPI2 RCC_AHB5ENR_XSPI2EN +#define LL_AHB5_GRP1_PERIPH_XSPIM RCC_AHB5ENR_XSPIMEN +#define LL_AHB5_GRP1_PERIPH_SDMMC1 RCC_AHB5ENR_SDMMC1EN +#define LL_AHB5_GRP1_PERIPH_GFXMMU RCC_AHB5ENR_GFXMMUEN +#if defined(GPU2D) +#define LL_AHB5_GRP1_PERIPH_GPU2D RCC_AHB5ENR_GPU2DEN +#endif /* GPU2D */ + +#define LL_AHB5_GRP1_PERIPH_FLASH RCC_AHB5LPENR_FLASHLPEN +#define LL_AHB5_GRP1_PERIPH_AXISRAM RCC_AHB5LPENR_AXISRAMLPEN +#define LL_AHB5_GRP1_PERIPH_DTCM1 RCC_AHB5LPENR_DTCM1LPEN +#define LL_AHB5_GRP1_PERIPH_DTCM2 RCC_AHB5LPENR_DTCM2LPEN +#define LL_AHB5_GRP1_PERIPH_ITCM RCC_AHB5LPENR_ITCMLPEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN +#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR1_TIM12EN +#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR1_TIM13EN +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR1_TIM14EN +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN +#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR1_SPDIFRXEN +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1_I3C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN +#define LL_APB1_GRP1_PERIPH_I3C1 RCC_APB1ENR1_I2C1_I3C1EN +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR1_CECEN +#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR1_UART7EN +#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR1_UART8EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH + * @{ + */ +#define LL_APB1_GRP2_PERIPH_CRS RCC_APB1ENR2_CRSEN +#define LL_APB1_GRP2_PERIPH_MDIOS RCC_APB1ENR2_MDIOSEN +#define LL_APB1_GRP2_PERIPH_FDCAN RCC_APB1ENR2_FDCANEN +#define LL_APB1_GRP2_PERIPH_UCPD1 RCC_APB1ENR2_UCPD1EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN +#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN +#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB4_GRP1_PERIPH APB4 GRP1 PERIPH + * @{ + */ +#define LL_APB4_GRP1_PERIPH_SBS RCC_APB4ENR_SBSEN +#define LL_APB4_GRP1_PERIPH_LPUART1 RCC_APB4ENR_LPUART1EN +#define LL_APB4_GRP1_PERIPH_SPI6 RCC_APB4ENR_SPI6EN +#define LL_APB4_GRP1_PERIPH_LPTIM2 RCC_APB4ENR_LPTIM2EN +#define LL_APB4_GRP1_PERIPH_LPTIM3 RCC_APB4ENR_LPTIM3EN +#define LL_APB4_GRP1_PERIPH_LPTIM4 RCC_APB4ENR_LPTIM4EN +#define LL_APB4_GRP1_PERIPH_LPTIM5 RCC_APB4ENR_LPTIM5EN +#define LL_APB4_GRP1_PERIPH_VREF RCC_APB4ENR_VREFEN +#define LL_APB4_GRP1_PERIPH_RTCAPB RCC_APB4ENR_RTCAPBEN +#define LL_APB4_GRP1_PERIPH_DTS RCC_APB4ENR_DTSEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB5_GRP1_PERIPH APB5 GRP1 PERIPH + * @{ + */ +#if defined(LTDC) +#define LL_APB5_GRP1_PERIPH_LTDC RCC_APB5ENR_LTDCEN +#endif /* LTDC */ +#define LL_APB5_GRP1_PERIPH_DCMIPP RCC_APB5ENR_DCMIPPEN +#define LL_APB5_GRP1_PERIPH_GFXTIM RCC_APB5ENR_GFXTIMEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_CKGA_PERIPH CKGA (AXI Clocks Gating) PERIPH + * @{ + */ +#define LL_CKGA_PERIPH_AXI RCC_CKGDISR_AXICKG +#define LL_CKGA_PERIPH_AHBM RCC_CKGDISR_AHBMCKG +#define LL_CKGA_PERIPH_SDMMC1 RCC_CKGDISR_SDMMC1CKG +#define LL_CKGA_PERIPH_HPDMA1 RCC_CKGDISR_HPDMA1CKG +#define LL_CKGA_PERIPH_CPU RCC_CKGDISR_CPUCKG +#if defined(GPU2D) +#define LL_CKGA_PERIPH_GPU2DS1 RCC_CKGDISR_GPU2DS1CKG +#define LL_CKGA_PERIPH_GPU2DS0 RCC_CKGDISR_GPU2DS0CKG +#define LL_CKGA_PERIPH_GPU2DCL RCC_CKGDISR_GPU2DCLCKG +#endif /* GPU2D */ +#define LL_CKGA_PERIPH_DCMIPP RCC_CKGDISR_DCMIPPCKG +#define LL_CKGA_PERIPH_DMA2D RCC_CKGDISR_DMA2DCKG +#define LL_CKGA_PERIPH_GFXMMUS RCC_CKGDISR_GFXMMUSCKG +#if defined(LTDC) +#define LL_CKGA_PERIPH_LTDC RCC_CKGDISR_LTDCCKG +#endif /* LTDC */ +#define LL_CKGA_PERIPH_GFXMMUM RCC_CKGDISR_GFXMMUMCKG +#define LL_CKGA_PERIPH_AHBS RCC_CKGDISR_AHBSCKG +#define LL_CKGA_PERIPH_FMC RCC_CKGDISR_FMCCKG +#define LL_CKGA_PERIPH_XSPI1 RCC_CKGDISR_XSPI1CKG +#define LL_CKGA_PERIPH_XSPI2 RCC_CKGDISR_XSPI2CKG +#define LL_CKGA_PERIPH_AXIRAM1 RCC_CKGDISR_AXISRAM1CKG +#define LL_CKGA_PERIPH_AXIRAM2 RCC_CKGDISR_AXISRAM2CKG +#define LL_CKGA_PERIPH_AXIRAM3 RCC_CKGDISR_AXISRAM3CKG +#define LL_CKGA_PERIPH_AXIRAM4 RCC_CKGDISR_AXISRAM4CKG +#define LL_CKGA_PERIPH_FLASH RCC_CKGDISR_FLASHCKG +#define LL_CKGA_PERIPH_EXTI RCC_CKGDISR_EXTICKG +#define LL_CKGA_PERIPH_JTAG RCC_CKGDISR_JTAGCKG +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHB1ENR GPDMA1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR OTGFSEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR USBPHYCEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ADF1EN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR GPDMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR OTGFSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USBPHYCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADF1EN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHB1ENR GPDMA1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR OTGFSEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR USBPHYCEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ADF1EN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1ENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHB1RSTR GPDMA1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ETH1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR OTGFSRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR USBPHYCRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ADF1RST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHB1RSTR GPDMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ETH1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR OTGFSRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR USBPHYCRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ADF1RST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR GPDMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR OTGFSLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USBPHYCLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADF1LPEN LL_AHB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR GPDMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USBPHYCLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADF1LPEN LL_AHB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPDMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBOTGFS + * @arg @ref LL_AHB1_GRP1_PERIPH_USBPHYC + * @arg @ref LL_AHB1_GRP1_PERIPH_ADF1 + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable AHB2 peripherals clock. + * @rmtoll AHB2ENR PSSIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR AHBSRAM1EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR AHBSRAM2EN LL_AHB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM2 + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR PSSIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR AHBSRAM1EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR AHBSRAM2EN LL_AHB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM2 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB2 peripherals clock. + * @rmtoll AHB2ENR PSSIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR AHBSRAM1EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR AHBSRAM2EN LL_AHB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM2 + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2ENR, Periphs); +} + +/** + * @brief Force AHB2 peripherals reset. + * @rmtoll AHB2RSTR PSSIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Release AHB2 peripherals reset. + * @rmtoll AHB2RSTR PSSIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Enable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR PSSILPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CORDICLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR AHBSRAM1LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR AHBSRAM2LPEN LL_AHB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM2 + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR PSSILPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CORDICLPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR AHBSRAM1LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR AHBSRAM2LPEN LL_AHB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_PSSI + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_AHBSRAM2 + * @retval None + */ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3ENR RNGEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR HASHEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR CRYPEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR SAESEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR PKAEN LL_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR RNGEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR HASHEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR CRYPEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR SAESEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR PKAEN LL_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB3 peripherals clock. + * @rmtoll AHB3ENR RNGEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR HASHEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR CRYPEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR SAESEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR PKAEN LL_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3ENR, Periphs); +} + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3RSTR RNGRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR HASHRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR CRYPRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR SAESRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR PKARST LL_AHB3_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Release AHB3 peripherals reset. + * @rmtoll AHB3RSTR RNGRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR HASHRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR CRYPRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR SAESRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR PKARST LL_AHB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Enable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR RNGLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR HASHLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR CRYPLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR SAESLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR PKALPEN LL_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR RNGLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR HASHLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR CRYPLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR SAESLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR PKALPEN LL_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_RNG + * @arg @ref LL_AHB3_GRP1_PERIPH_HASH + * @arg @ref LL_AHB3_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SAES (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_PKA + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOMEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIONEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOOEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOPEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOMEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIONEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOOEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOPEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOMEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIONEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOOEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOPEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4ENR, Periphs); +} + +/** + * @brief Force AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOMRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIONRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOORST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOPRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR BKPRAMRST LL_AHB4_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Release AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOMRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIONRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOORST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOPRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Enable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOMLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIONLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOOLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOPLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOMLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIONLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOOLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOPLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOM + * @arg @ref LL_AHB4_GRP1_PERIPH_GPION + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOO + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOP + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @retval None + */ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB5 AHB5 + * @{ + */ + +/** + * @brief Enable AHB5 peripherals clock. + * @rmtoll AHB5ENR HPDMA1EN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR DMA2DEN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR JPEGEN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR FMCEN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR XSPI1EN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR XSPI2EN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR XSPIMEN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR SDMMC1EN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR GFXMMUEN LL_AHB5_GRP1_EnableClock\n + * AHB5ENR GPU2DEN LL_AHB5_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB5ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB5ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB5 peripheral clock is enabled or not + * @rmtoll AHB5ENR HPDMA1EN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR DMA2DEN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR JPEGEN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR FMCEN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR XSPI1EN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR XSPI2EN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR XSPIMEN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR SDMMC1EN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR GFXMMUEN LL_AHB5_GRP1_IsEnabledClock\n + * AHB5ENR GPU2DEN LL_AHB5_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * + * (*) value not defined in all devices. + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB5_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB5ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB5 peripherals clock. + * @rmtoll AHB5ENR HPDMA1EN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR DMA2DEN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR JPEGEN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR FMCEN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR XSPI1EN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR XSPI2EN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR XSPIMEN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR SDMMC1EN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR GFXMMUEN LL_AHB5_GRP1_DisableClock\n + * AHB5ENR GPU2DEN LL_AHB5_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB5ENR, Periphs); +} + +/** + * @brief Force AHB5 peripherals reset. + * @rmtoll AHB5RSTR HPDMA1RST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR DMA2DRST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR JPEGRST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR FMCRST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR XSPI1RST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR XSPI2RST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR XSPIMRST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR SDMMC1RST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR GFXMMURST LL_AHB5_GRP1_ForceReset\n + * AHB5RSTR GPU2DRST LL_AHB5_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB5RSTR, Periphs); +} + +/** + * @brief Release AHB5 peripherals reset. + * @rmtoll AHB5RSTR HPDMA1RST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR DMA2DRST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR JPEGRST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR FMCRST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR XSPI1RST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR XSPI2RST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR XSPIMRST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR SDMMC1RST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR GFXMMURST LL_AHB5_GRP1_ReleaseReset\n + * AHB5RSTR GPU2DRST LL_AHB5_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB5RSTR, Periphs); +} + +/** + * @brief Enable AHB5 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB5LPENR HPDMA1LPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR DMA2DLPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR JPEGLPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR FMCLPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR XSPI1LPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR XSPI2LPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR XSPIMLPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR SDMMC1LPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR GFXMMULPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR GPU2DLPEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR AXISRAMPLEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR DTCM1PLEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR DTCM2PLEN LL_AHB5_GRP1_EnableClockSleep\n + * AHB5LPENR ITCMPLEN LL_AHB5_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_AXISRAM + * @arg @ref LL_AHB5_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB5_GRP1_PERIPH_ITCM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB5LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB5LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB5 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB5LPENR HPDMA1LPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR DMA2DLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR FLASHLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR JPEGLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR FMCLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR XSPI1LPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR XSPI2LPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR XSPIMLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR SDMMC1LPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR GFXMMULPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR GPU2DLPEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR AXISRAMPLEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR DTCM1PLEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR DTCM2PLEN LL_AHB5_GRP1_DisableClockSleep\n + * AHB5LPENR ITCMPLEN LL_AHB5_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB5_GRP1_PERIPH_HPDMA1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB5_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB5_GRP1_PERIPH_JPEG (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_FMC + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI1 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPI2 + * @arg @ref LL_AHB5_GRP1_PERIPH_XSPIM + * @arg @ref LL_AHB5_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB5_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_GPU2D (*) + * @arg @ref LL_AHB5_GRP1_PERIPH_AXISRAM + * @arg @ref LL_AHB5_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB5_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB5_GRP1_PERIPH_ITCM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_AHB5_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB5LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM12EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM13EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 SPDIFRXEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I3C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 CECEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART8EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM13EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I3C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 CECEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART8EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1ENR1, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM12EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM13EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 SPDIFRXEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I3C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 CECEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART8EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR1, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM12RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM13RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 WWDGRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 SPDIFRXRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I3C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 CECRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART8RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR1, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM12RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM13RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I3C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 CECRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART8RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR1, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR1 TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM13LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 TIM14LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 LPTIM1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 WWDGLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 SPDIFRXLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 USART2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 USART3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 UART4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 UART5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 I2C3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 I3C1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 CECLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 DAC12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 UART7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LPENR1 UART8LPEN LL_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LPENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LPENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR1 TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM12LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM13LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 TIM14LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 LPTIM1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 WWDGLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 SPDIFRXLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 USART2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 USART3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 UART4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 UART5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 I2C3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 I3C1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 CECLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 UART7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LPENR1 UART8LPEN LL_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I3C1 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LPENR1, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR2 CRSEN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 MDIOSEN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 FDCANEN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 UCPD1EN LL_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR2 CRSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 MDIOSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 FDCANEN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 UCPD1EN LL_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1ENR2, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR2 CRSEN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 MDIOSEN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 FDCANEN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 UCPD1EN LL_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR2, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR2 CRSRST LL_APB1_GRP2_ForceReset\n + * APB1ENR2 MDIOSRST LL_APB1_GRP2_ForceReset\n + * APB1ENR2 FDCANRST LL_APB1_GRP2_ForceReset\n + * APB1ENR2 UCPD1RST LL_APB1_GRP2_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR2, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR2 CRSRST LL_APB1_GRP2_ReleaseReset\n + * APB1ENR2 MDIOSRST LL_APB1_GRP2_ReleaseReset\n + * APB1ENR2 FDCANRST LL_APB1_GRP2_ReleaseReset\n + * APB1ENR2 UCPD1RST LL_APB1_GRP2_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR2, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR2 CRSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1LPENR2 MDIOSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1LPENR2 FDCANLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1LPENR2 UCPD1LPEN LL_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LPENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LPENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LPENR2 CRSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1LPENR2 MDIOSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1LPENR2 FDCANLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1LPENR2 UCPD1LPEN LL_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LPENR2, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable APB4 peripherals clock. + * @rmtoll APB4ENR SBSEN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM5EN LL_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_EnableClock\n + * APB4ENR DTSEN LL_APB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SBSEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM5EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR DTSEN LL_APB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB4 peripherals clock. + * @rmtoll APB4ENR SBSEN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM5EN LL_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_DisableClock\n + * APB4ENR DTSEN LL_APB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4ENR, Periphs); +} + +/** + * @brief Force APB4 peripherals reset. + * @rmtoll APB4RSTR SBSRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR DTSRST LL_APB4_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Release APB4 peripherals reset. + * @rmtoll APB4RSTR SBSRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR DTSRST LL_APB4_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Enable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SBSLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR DTSLPEN LL_APB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SBSLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR DTSLPEN LL_APB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SBS + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_DTS + * @retval None + */ +__STATIC_INLINE void LL_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB5 APB5 + * @{ + */ + +/** + * @brief Enable APB5 peripherals clock. + * @rmtoll APB5ENR LTDCEN LL_APB5_GRP1_EnableClock\n + * APB5ENR DCMIPPEN LL_APB5_GRP1_EnableClock\n + * APB5ENR GFXTIMEN LL_APB5_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB5ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB5ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB5 peripheral clock is enabled or not + * @rmtoll APB5ENR LTDCEN LL_APB5_GRP1_IsEnabledClock\n + * APB5ENR DCMIPPEN LL_APB5_GRP1_IsEnabledClock\n + * APB5ENR GFXTIMEN LL_APB5_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB5_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB5ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB5 peripherals clock. + * @rmtoll APB5ENR LTDCEN LL_APB5_GRP1_DisableClock\n + * APB5ENR DCMIPPEN LL_APB5_GRP1_DisableClock\n + * APB5ENR GFXTIMEN LL_APB5_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB5ENR, Periphs); +} + +/** + * @brief Force APB5 peripherals reset. + * @rmtoll APB5RSTR LTDCRST LL_APB5_GRP1_ForceReset\n + * APB5RSTR DCMIPPRST LL_APB5_GRP1_ForceReset\n + * APB5RSTR GFXTIMRST LL_APB5_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB5RSTR, Periphs); +} + +/** + * @brief Release APB5 peripherals reset. + * @rmtoll APB5RSTR LTDCRST LL_APB5_GRP1_ReleaseReset\n + * APB5RSTR DCMIPPRST LL_APB5_GRP1_ForceReset\n + * APB5RSTR GFXTIMRST LL_APB5_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB5RSTR, Periphs); +} + +/** + * @brief Enable APB5 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB5LPENR LTDCLPEN LL_APB5_GRP1_EnableClockSleep\n + * APB5LPENR DCMIPPLPEN LL_APB5_GRP1_EnableClockSleep\n + * APB5LPENR GFXTIMLPEN LL_APB5_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB5LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB5LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB5 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB5LPENR LTDCLPEN LL_APB5_GRP1_DisableClockSleep\n + * APB5LPENR DCMIPPLPEN LL_APB5_GRP1_DisableClockSleep\n + * APB5LPENR GFXTIMLPEN LL_APB5_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB5_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB5_GRP1_PERIPH_DCMIPP + * @arg @ref LL_APB5_GRP1_PERIPH_GFXTIM + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_APB5_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB5LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_CKGA CKGA (AXI Clocks Gating) + * @{ + */ + +/** + * @brief Enable clock gating for AXI bus peripherals. + * @rmtoll CKGDISR AXICKG LL_CKGA_Enable\n + * CKGDISR AHBMCKG LL_CKGA_Enable\n + * CKGDISR SDMMC1CKG LL_CKGA_Enable\n + * CKGDISR HPDMA1CKG LL_CKGA_Enable\n + * CKGDISR CPUCKG LL_CKGA_Enable\n + * CKGDISR GPU2DS0CKG LL_CKGA_Enable\n + * CKGDISR GPU2DS1CKG LL_CKGA_Enable\n + * CKGDISR GPUCLCKG LL_CKGA_Enable\n + * CKGDISR DCMIPPCKG LL_CKGA_Enable\n + * CKGDISR DMA2DCKG LL_CKGA_Enable\n + * CKGDISR GFXMMUSCKG LL_CKGA_Enable\n + * CKGDISR LTDCCKG LL_CKGA_Enable\n + * CKGDISR GFXMMUMCKG LL_CKGA_Enable\n + * CKGDISR AHBSCKG LL_CKGA_Enable\n + * CKGDISR FMCCKG LL_CKGA_Enable\n + * CKGDISR XSPI2CKG LL_CKGA_Enable\n + * CKGDISR XSPI1CKG LL_CKGA_Enable\n + * CKGDISR AXIRAM1CKG LL_CKGA_Enable\n + * CKGDISR AXIRAM2CKG LL_CKGA_Enable\n + * CKGDISR AXIRAM3CKG LL_CKGA_Enable\n + * CKGDISR AXIRAM4CKG LL_CKGA_Enable\n + * CKGDISR FLASHCKG LL_CKGA_Enable\n + * CKGDISR EXTICKG LL_CKGA_Enable\n + * CKGDISR JTAGCKG LL_CKGA_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHBM + * @arg @ref LL_CKGA_PERIPH_AHBS + * @arg @ref LL_CKGA_PERIPH_SDMMC1 + * @arg @ref LL_CKGA_PERIPH_HPDMA1 + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_GPU2DS0 (*) + * @arg @ref LL_CKGA_PERIPH_GPU2DS1 (*) + * @arg @ref LL_CKGA_PERIPH_GPU2DCL (*) + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_DCMIPP + * @arg @ref LL_CKGA_PERIPH_LTDC (*) + * @arg @ref LL_CKGA_PERIPH_FLASH + * @arg @ref LL_CKGA_PERIPH_XSPI2 + * @arg @ref LL_CKGA_PERIPH_XSPI1 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_AXIRAM4 + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_CKGA_Enable(uint32_t Periphs) +{ + CLEAR_BIT(RCC->CKGDISR, Periphs); +} + +/** + * @brief Check if AXI bus peripherals clock gating is enabled or not + * @rmtoll CKGDISR AXICKG LL_CKGA_IsEnabledClock\n + * CKGDISR AHBMCKG LL_CKGA_IsEnabledClock\n + * CKGDISR SDMMC1CKG LL_CKGA_IsEnabledClock\n + * CKGDISR HPDMA1CKG LL_CKGA_IsEnabledClock\n + * CKGDISR CPUCKG LL_CKGA_IsEnabledClock\n + * CKGDISR GPU2DS0CKG LL_CKGA_IsEnabledClock\n + * CKGDISR GPU2DS1CKG LL_CKGA_IsEnabledClock\n + * CKGDISR GPU2DCLCKG LL_CKGA_IsEnabledClock\n + * CKGDISR DCMIPPCKG LL_CKGA_IsEnabledClock\n + * CKGDISR DMA2DCKG LL_CKGA_IsEnabledClock\n + * CKGDISR GFXMMUSCKG LL_CKGA_IsEnabledClock\n + * CKGDISR LTDCCKG LL_CKGA_IsEnabledClock\n + * CKGDISR GFXMMUMCKG LL_CKGA_IsEnabledClock\n + * CKGDISR AHBSCKG LL_CKGA_IsEnabledClock\n + * CKGDISR FMCCKG LL_CKGA_IsEnabledClock\n + * CKGDISR XSPI2CKG LL_CKGA_IsEnabledClock\n + * CKGDISR XSPI1CKG LL_CKGA_IsEnabledClock\n + * CKGDISR AXIRAM1CKG LL_CKGA_IsEnabledClock\n + * CKGDISR AXIRAM2CKG LL_CKGA_IsEnabledClock\n + * CKGDISR AXIRAM3CKG LL_CKGA_IsEnabledClock\n + * CKGDISR AXIRAM4CKG LL_CKGA_IsEnabledClock\n + * CKGDISR FLASHCKG LL_CKGA_IsEnabledClock\n + * CKGDISR EXTICKG LL_CKGA_IsEnabledClock\n + * CKGDISR JTAGCKG LL_CKGA_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHBM + * @arg @ref LL_CKGA_PERIPH_AHBS + * @arg @ref LL_CKGA_PERIPH_SDMMC1 + * @arg @ref LL_CKGA_PERIPH_HPDMA1 + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_GPU2DS0 (*) + * @arg @ref LL_CKGA_PERIPH_GPU2DS1 (*) + * @arg @ref LL_CKGA_PERIPH_GPU2DCL (*) + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_DCMIPP + * @arg @ref LL_CKGA_PERIPH_LTDC (*) + * @arg @ref LL_CKGA_PERIPH_FLASH + * @arg @ref LL_CKGA_PERIPH_XSPI2 + * @arg @ref LL_CKGA_PERIPH_XSPI1 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_AXIRAM4 + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * + * (*) value not defined in all devices. + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_CKGA_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->CKGDISR, Periphs) == 0U) ? 1U : 0U); +} + +/** + * @brief Disable clock gating for AXI bus peripherals. + * @rmtoll CKGDISR AXICKG LL_CKGA_Disable\n + * CKGDISR AHBMCKG LL_CKGA_Disable\n + * CKGDISR SDMMC1CKG LL_CKGA_Disable\n + * CKGDISR HPDMA1CKG LL_CKGA_Disable\n + * CKGDISR CPUCKG LL_CKGA_Disable\n + * CKGDISR GPU2DS0CKG LL_CKGA_Disable\n + * CKGDISR GPU2DS1CKG LL_CKGA_Disable\n + * CKGDISR GPUCLCKG LL_CKGA_Disable\n + * CKGDISR DCMIPPCKG LL_CKGA_Disable\n + * CKGDISR DMA2DCKG LL_CKGA_Disable\n + * CKGDISR GFXMMUSCKG LL_CKGA_Disable\n + * CKGDISR LTDCCKG LL_CKGA_Disable\n + * CKGDISR GFXMMUMCKG LL_CKGA_Disable\n + * CKGDISR AHBSCKG LL_CKGA_Disable\n + * CKGDISR FMCCKG LL_CKGA_Disable\n + * CKGDISR XSPI2CKG LL_CKGA_Disable\n + * CKGDISR XSPI1CKG LL_CKGA_Disable\n + * CKGDISR AXIRAM1CKG LL_CKGA_Disable\n + * CKGDISR AXIRAM2CKG LL_CKGA_Disable\n + * CKGDISR AXIRAM3CKG LL_CKGA_Disable\n + * CKGDISR AXIRAM4CKG LL_CKGA_Disable\n + * CKGDISR FLASHCKG LL_CKGA_Disable\n + * CKGDISR EXTICKG LL_CKGA_Disable\n + * CKGDISR JTAGCKG LL_CKGA_Disable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHBM + * @arg @ref LL_CKGA_PERIPH_AHBS + * @arg @ref LL_CKGA_PERIPH_SDMMC1 + * @arg @ref LL_CKGA_PERIPH_HPDMA1 + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_GPU2DS0 + * @arg @ref LL_CKGA_PERIPH_GPU2DS1 + * @arg @ref LL_CKGA_PERIPH_GPU2DCL + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_DCMIPP + * @arg @ref LL_CKGA_PERIPH_LTDC + * @arg @ref LL_CKGA_PERIPH_FLASH + * @arg @ref LL_CKGA_PERIPH_XSPI2 + * @arg @ref LL_CKGA_PERIPH_XSPI1 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_AXIRAM4 + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_CKGA_Disable(uint32_t Periphs) +{ + SET_BIT(RCC->CKGDISR, Periphs); +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_BUS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cordic.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cordic.h new file mode 100644 index 000000000..df46074f0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cordic.h @@ -0,0 +1,783 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_cordic.h + * @author MCD Application Team + * @brief Header file of CORDIC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_CORDIC_H +#define STM32H7RSxx_LL_CORDIC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(CORDIC) + +/** @defgroup CORDIC_LL CORDIC + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORDIC_LL_Exported_Constants CORDIC Exported Constants + * @{ + */ + +/** @defgroup CORDIC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CORDIC_ReadReg function. + * @{ + */ +#define LL_CORDIC_FLAG_RRDY CORDIC_CSR_RRDY +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CORDIC_ReadReg and LL_CORDIC_WriteReg functions. + * @{ + */ +#define LL_CORDIC_IT_IEN CORDIC_CSR_IEN /*!< Result Ready interrupt enable */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_FUNCTION FUNCTION + * @{ + */ +#define LL_CORDIC_FUNCTION_COSINE (0x00000000U) /*!< Cosine */ +#define LL_CORDIC_FUNCTION_SINE ((uint32_t)(CORDIC_CSR_FUNC_0)) /*!< Sine */ +#define LL_CORDIC_FUNCTION_PHASE ((uint32_t)(CORDIC_CSR_FUNC_1)) /*!< Phase */ +#define LL_CORDIC_FUNCTION_MODULUS ((uint32_t)(CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0)) /*!< Modulus */ +#define LL_CORDIC_FUNCTION_ARCTANGENT ((uint32_t)(CORDIC_CSR_FUNC_2)) /*!< Arctangent */ +#define LL_CORDIC_FUNCTION_HCOSINE ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_0)) /*!< Hyperbolic Cosine */ +#define LL_CORDIC_FUNCTION_HSINE ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1)) /*!< Hyperbolic Sine */ +#define LL_CORDIC_FUNCTION_HARCTANGENT ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0))/*!< Hyperbolic Arctangent */ +#define LL_CORDIC_FUNCTION_NATURALLOG ((uint32_t)(CORDIC_CSR_FUNC_3)) /*!< Natural Logarithm */ +#define LL_CORDIC_FUNCTION_SQUAREROOT ((uint32_t)(CORDIC_CSR_FUNC_3 | CORDIC_CSR_FUNC_0)) /*!< Square Root */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_PRECISION PRECISION + * @{ + */ +#define LL_CORDIC_PRECISION_1CYCLE ((uint32_t)(CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_2CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_1)) +#define LL_CORDIC_PRECISION_3CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_4CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2)) +#define LL_CORDIC_PRECISION_5CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_6CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1)) +#define LL_CORDIC_PRECISION_7CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_2\ + | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_8CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3)) +#define LL_CORDIC_PRECISION_9CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_10CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_1)) +#define LL_CORDIC_PRECISION_11CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_12CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2)) +#define LL_CORDIC_PRECISION_13CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0)) +#define LL_CORDIC_PRECISION_14CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1)) +#define LL_CORDIC_PRECISION_15CYCLES ((uint32_t)(CORDIC_CSR_PRECISION_3\ + | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1\ + | CORDIC_CSR_PRECISION_0)) +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_SCALE SCALE + * @{ + */ +#define LL_CORDIC_SCALE_0 (0x00000000U) +#define LL_CORDIC_SCALE_1 ((uint32_t)(CORDIC_CSR_SCALE_0)) +#define LL_CORDIC_SCALE_2 ((uint32_t)(CORDIC_CSR_SCALE_1)) +#define LL_CORDIC_SCALE_3 ((uint32_t)(CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0)) +#define LL_CORDIC_SCALE_4 ((uint32_t)(CORDIC_CSR_SCALE_2)) +#define LL_CORDIC_SCALE_5 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_0)) +#define LL_CORDIC_SCALE_6 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1)) +#define LL_CORDIC_SCALE_7 ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0)) +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_NBWRITE NBWRITE + * @{ + */ +#define LL_CORDIC_NBWRITE_1 (0x00000000U) /*!< One 32-bits write containing either only one + 32-bit data input (Q1.31 format), or two + 16-bit data input (Q1.15 format) packed + in one 32 bits Data */ +#define LL_CORDIC_NBWRITE_2 CORDIC_CSR_NARGS /*!< Two 32-bit write containing two 32-bits data input + (Q1.31 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_NBREAD NBREAD + * @{ + */ +#define LL_CORDIC_NBREAD_1 (0x00000000U) /*!< One 32-bits read containing either only one + 32-bit data output (Q1.31 format), or two + 16-bit data output (Q1.15 format) packed + in one 32 bits Data */ +#define LL_CORDIC_NBREAD_2 CORDIC_CSR_NRES /*!< Two 32-bit Data containing two 32-bits data output + (Q1.31 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_INSIZE INSIZE + * @{ + */ +#define LL_CORDIC_INSIZE_32BITS (0x00000000U) /*!< 32 bits input data size (Q1.31 format) */ +#define LL_CORDIC_INSIZE_16BITS CORDIC_CSR_ARGSIZE /*!< 16 bits input data size (Q1.15 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_OUTSIZE OUTSIZE + * @{ + */ +#define LL_CORDIC_OUTSIZE_32BITS (0x00000000U) /*!< 32 bits output data size (Q1.31 format) */ +#define LL_CORDIC_OUTSIZE_16BITS CORDIC_CSR_RESSIZE /*!< 16 bits output data size (Q1.15 format) */ +/** + * @} + */ + +/** @defgroup CORDIC_LL_EC_DMA_REG_DATA DMA register data + * @{ + */ +#define LL_CORDIC_DMA_REG_DATA_IN (0x00000000U) /*!< Get address of input data register */ +#define LL_CORDIC_DMA_REG_DATA_OUT (0x00000001U) /*!< Get address of output data register */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CORDIC_LL_Exported_Macros CORDIC Exported Macros + * @{ + */ + +/** @defgroup CORDIC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CORDIC register. + * @param __INSTANCE__ CORDIC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CORDIC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CORDIC register. + * @param __INSTANCE__ CORDIC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CORDIC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORDIC_LL_Exported_Functions CORDIC Exported Functions + * @{ + */ + +/** @defgroup CORDIC_LL_EF_Configuration CORDIC Configuration functions + * @{ + */ + +/** + * @brief Configure the CORDIC processing. + * @note This function set all parameters of CORDIC processing. + * These parameters can also be set individually using + * dedicated functions: + * - @ref LL_CORDIC_SetFunction() + * - @ref LL_CORDIC_SetPrecision() + * - @ref LL_CORDIC_SetScale() + * - @ref LL_CORDIC_SetNbWrite() + * - @ref LL_CORDIC_SetNbRead() + * - @ref LL_CORDIC_SetInSize() + * - @ref LL_CORDIC_SetOutSize() + * @rmtoll CSR FUNC LL_CORDIC_Config\n + * CSR PRECISION LL_CORDIC_Config\n + * CSR SCALE LL_CORDIC_Config\n + * CSR NARGS LL_CORDIC_Config\n + * CSR NRES LL_CORDIC_Config\n + * CSR ARGSIZE LL_CORDIC_Config\n + * CSR RESIZE LL_CORDIC_Config + * @param CORDICx CORDIC instance + * @param Function parameter can be one of the following values: + * @arg @ref LL_CORDIC_FUNCTION_COSINE + * @arg @ref LL_CORDIC_FUNCTION_SINE + * @arg @ref LL_CORDIC_FUNCTION_PHASE + * @arg @ref LL_CORDIC_FUNCTION_MODULUS + * @arg @ref LL_CORDIC_FUNCTION_ARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_HCOSINE + * @arg @ref LL_CORDIC_FUNCTION_HSINE + * @arg @ref LL_CORDIC_FUNCTION_HARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_NATURALLOG + * @arg @ref LL_CORDIC_FUNCTION_SQUAREROOT + * @param Precision parameter can be one of the following values: + * @arg @ref LL_CORDIC_PRECISION_1CYCLE + * @arg @ref LL_CORDIC_PRECISION_2CYCLES + * @arg @ref LL_CORDIC_PRECISION_3CYCLES + * @arg @ref LL_CORDIC_PRECISION_4CYCLES + * @arg @ref LL_CORDIC_PRECISION_5CYCLES + * @arg @ref LL_CORDIC_PRECISION_6CYCLES + * @arg @ref LL_CORDIC_PRECISION_7CYCLES + * @arg @ref LL_CORDIC_PRECISION_8CYCLES + * @arg @ref LL_CORDIC_PRECISION_9CYCLES + * @arg @ref LL_CORDIC_PRECISION_10CYCLES + * @arg @ref LL_CORDIC_PRECISION_11CYCLES + * @arg @ref LL_CORDIC_PRECISION_12CYCLES + * @arg @ref LL_CORDIC_PRECISION_13CYCLES + * @arg @ref LL_CORDIC_PRECISION_14CYCLES + * @arg @ref LL_CORDIC_PRECISION_15CYCLES + * @param Scale parameter can be one of the following values: + * @arg @ref LL_CORDIC_SCALE_0 + * @arg @ref LL_CORDIC_SCALE_1 + * @arg @ref LL_CORDIC_SCALE_2 + * @arg @ref LL_CORDIC_SCALE_3 + * @arg @ref LL_CORDIC_SCALE_4 + * @arg @ref LL_CORDIC_SCALE_5 + * @arg @ref LL_CORDIC_SCALE_6 + * @arg @ref LL_CORDIC_SCALE_7 + * @param NbWrite parameter can be one of the following values: + * @arg @ref LL_CORDIC_NBWRITE_1 + * @arg @ref LL_CORDIC_NBWRITE_2 + * @param NbRead parameter can be one of the following values: + * @arg @ref LL_CORDIC_NBREAD_1 + * @arg @ref LL_CORDIC_NBREAD_2 + * @param InSize parameter can be one of the following values: + * @arg @ref LL_CORDIC_INSIZE_32BITS + * @arg @ref LL_CORDIC_INSIZE_16BITS + * @param OutSize parameter can be one of the following values: + * @arg @ref LL_CORDIC_OUTSIZE_32BITS + * @arg @ref LL_CORDIC_OUTSIZE_16BITS + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_Config(CORDIC_TypeDef *CORDICx, uint32_t Function, uint32_t Precision, uint32_t Scale, + uint32_t NbWrite, uint32_t NbRead, uint32_t InSize, uint32_t OutSize) +{ + MODIFY_REG(CORDICx->CSR, + CORDIC_CSR_FUNC | CORDIC_CSR_PRECISION | CORDIC_CSR_SCALE | + CORDIC_CSR_NARGS | CORDIC_CSR_NRES | CORDIC_CSR_ARGSIZE | CORDIC_CSR_RESSIZE, + Function | Precision | Scale | + NbWrite | NbRead | InSize | OutSize); +} + +/** + * @brief Configure function. + * @rmtoll CSR FUNC LL_CORDIC_SetFunction + * @param CORDICx CORDIC Instance + * @param Function parameter can be one of the following values: + * @arg @ref LL_CORDIC_FUNCTION_COSINE + * @arg @ref LL_CORDIC_FUNCTION_SINE + * @arg @ref LL_CORDIC_FUNCTION_PHASE + * @arg @ref LL_CORDIC_FUNCTION_MODULUS + * @arg @ref LL_CORDIC_FUNCTION_ARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_HCOSINE + * @arg @ref LL_CORDIC_FUNCTION_HSINE + * @arg @ref LL_CORDIC_FUNCTION_HARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_NATURALLOG + * @arg @ref LL_CORDIC_FUNCTION_SQUAREROOT + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetFunction(CORDIC_TypeDef *CORDICx, uint32_t Function) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_FUNC, Function); +} + +/** + * @brief Return function. + * @rmtoll CSR FUNC LL_CORDIC_GetFunction + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_FUNCTION_COSINE + * @arg @ref LL_CORDIC_FUNCTION_SINE + * @arg @ref LL_CORDIC_FUNCTION_PHASE + * @arg @ref LL_CORDIC_FUNCTION_MODULUS + * @arg @ref LL_CORDIC_FUNCTION_ARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_HCOSINE + * @arg @ref LL_CORDIC_FUNCTION_HSINE + * @arg @ref LL_CORDIC_FUNCTION_HARCTANGENT + * @arg @ref LL_CORDIC_FUNCTION_NATURALLOG + * @arg @ref LL_CORDIC_FUNCTION_SQUAREROOT + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetFunction(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_FUNC)); +} + +/** + * @brief Configure precision in cycles number. + * @rmtoll CSR PRECISION LL_CORDIC_SetPrecision + * @param CORDICx CORDIC Instance + * @param Precision parameter can be one of the following values: + * @arg @ref LL_CORDIC_PRECISION_1CYCLE + * @arg @ref LL_CORDIC_PRECISION_2CYCLES + * @arg @ref LL_CORDIC_PRECISION_3CYCLES + * @arg @ref LL_CORDIC_PRECISION_4CYCLES + * @arg @ref LL_CORDIC_PRECISION_5CYCLES + * @arg @ref LL_CORDIC_PRECISION_6CYCLES + * @arg @ref LL_CORDIC_PRECISION_7CYCLES + * @arg @ref LL_CORDIC_PRECISION_8CYCLES + * @arg @ref LL_CORDIC_PRECISION_9CYCLES + * @arg @ref LL_CORDIC_PRECISION_10CYCLES + * @arg @ref LL_CORDIC_PRECISION_11CYCLES + * @arg @ref LL_CORDIC_PRECISION_12CYCLES + * @arg @ref LL_CORDIC_PRECISION_13CYCLES + * @arg @ref LL_CORDIC_PRECISION_14CYCLES + * @arg @ref LL_CORDIC_PRECISION_15CYCLES + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetPrecision(CORDIC_TypeDef *CORDICx, uint32_t Precision) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_PRECISION, Precision); +} + +/** + * @brief Return precision in cycles number. + * @rmtoll CSR PRECISION LL_CORDIC_GetPrecision + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_PRECISION_1CYCLE + * @arg @ref LL_CORDIC_PRECISION_2CYCLES + * @arg @ref LL_CORDIC_PRECISION_3CYCLES + * @arg @ref LL_CORDIC_PRECISION_4CYCLES + * @arg @ref LL_CORDIC_PRECISION_5CYCLES + * @arg @ref LL_CORDIC_PRECISION_6CYCLES + * @arg @ref LL_CORDIC_PRECISION_7CYCLES + * @arg @ref LL_CORDIC_PRECISION_8CYCLES + * @arg @ref LL_CORDIC_PRECISION_9CYCLES + * @arg @ref LL_CORDIC_PRECISION_10CYCLES + * @arg @ref LL_CORDIC_PRECISION_11CYCLES + * @arg @ref LL_CORDIC_PRECISION_12CYCLES + * @arg @ref LL_CORDIC_PRECISION_13CYCLES + * @arg @ref LL_CORDIC_PRECISION_14CYCLES + * @arg @ref LL_CORDIC_PRECISION_15CYCLES + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetPrecision(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_PRECISION)); +} + +/** + * @brief Configure scaling factor. + * @rmtoll CSR SCALE LL_CORDIC_SetScale + * @param CORDICx CORDIC Instance + * @param Scale parameter can be one of the following values: + * @arg @ref LL_CORDIC_SCALE_0 + * @arg @ref LL_CORDIC_SCALE_1 + * @arg @ref LL_CORDIC_SCALE_2 + * @arg @ref LL_CORDIC_SCALE_3 + * @arg @ref LL_CORDIC_SCALE_4 + * @arg @ref LL_CORDIC_SCALE_5 + * @arg @ref LL_CORDIC_SCALE_6 + * @arg @ref LL_CORDIC_SCALE_7 + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetScale(CORDIC_TypeDef *CORDICx, uint32_t Scale) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_SCALE, Scale); +} + +/** + * @brief Return scaling factor. + * @rmtoll CSR SCALE LL_CORDIC_GetScale + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_SCALE_0 + * @arg @ref LL_CORDIC_SCALE_1 + * @arg @ref LL_CORDIC_SCALE_2 + * @arg @ref LL_CORDIC_SCALE_3 + * @arg @ref LL_CORDIC_SCALE_4 + * @arg @ref LL_CORDIC_SCALE_5 + * @arg @ref LL_CORDIC_SCALE_6 + * @arg @ref LL_CORDIC_SCALE_7 + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetScale(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_SCALE)); +} + +/** + * @brief Configure number of 32-bit write expected for one calculation. + * @rmtoll CSR NARGS LL_CORDIC_SetNbWrite + * @param CORDICx CORDIC Instance + * @param NbWrite parameter can be one of the following values: + * @arg @ref LL_CORDIC_NBWRITE_1 + * @arg @ref LL_CORDIC_NBWRITE_2 + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetNbWrite(CORDIC_TypeDef *CORDICx, uint32_t NbWrite) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_NARGS, NbWrite); +} + +/** + * @brief Return number of 32-bit write expected for one calculation. + * @rmtoll CSR NARGS LL_CORDIC_GetNbWrite + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_NBWRITE_1 + * @arg @ref LL_CORDIC_NBWRITE_2 + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetNbWrite(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_NARGS)); +} + +/** + * @brief Configure number of 32-bit read expected after one calculation. + * @rmtoll CSR NRES LL_CORDIC_SetNbRead + * @param CORDICx CORDIC Instance + * @param NbRead parameter can be one of the following values: + * @arg @ref LL_CORDIC_NBREAD_1 + * @arg @ref LL_CORDIC_NBREAD_2 + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetNbRead(CORDIC_TypeDef *CORDICx, uint32_t NbRead) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_NRES, NbRead); +} + +/** + * @brief Return number of 32-bit read expected after one calculation. + * @rmtoll CSR NRES LL_CORDIC_GetNbRead + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_NBREAD_1 + * @arg @ref LL_CORDIC_NBREAD_2 + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetNbRead(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_NRES)); +} + +/** + * @brief Configure width of input data. + * @rmtoll CSR ARGSIZE LL_CORDIC_SetInSize + * @param CORDICx CORDIC Instance + * @param InSize parameter can be one of the following values: + * @arg @ref LL_CORDIC_INSIZE_32BITS + * @arg @ref LL_CORDIC_INSIZE_16BITS + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetInSize(CORDIC_TypeDef *CORDICx, uint32_t InSize) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_ARGSIZE, InSize); +} + +/** + * @brief Return width of input data. + * @rmtoll CSR ARGSIZE LL_CORDIC_GetInSize + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_INSIZE_32BITS + * @arg @ref LL_CORDIC_INSIZE_16BITS + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetInSize(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_ARGSIZE)); +} + +/** + * @brief Configure width of output data. + * @rmtoll CSR RESIZE LL_CORDIC_SetOutSize + * @param CORDICx CORDIC Instance + * @param OutSize parameter can be one of the following values: + * @arg @ref LL_CORDIC_OUTSIZE_32BITS + * @arg @ref LL_CORDIC_OUTSIZE_16BITS + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_SetOutSize(CORDIC_TypeDef *CORDICx, uint32_t OutSize) +{ + MODIFY_REG(CORDICx->CSR, CORDIC_CSR_RESSIZE, OutSize); +} + +/** + * @brief Return width of output data. + * @rmtoll CSR RESIZE LL_CORDIC_GetOutSize + * @param CORDICx CORDIC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CORDIC_OUTSIZE_32BITS + * @arg @ref LL_CORDIC_OUTSIZE_16BITS + */ +__STATIC_INLINE uint32_t LL_CORDIC_GetOutSize(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_BIT(CORDICx->CSR, CORDIC_CSR_RESSIZE)); +} + +/** + * @} + */ + +/** @defgroup CORDIC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable CORDIC result ready interrupt + * @rmtoll CSR IEN LL_CORDIC_EnableIT + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_EnableIT(CORDIC_TypeDef *CORDICx) +{ + SET_BIT(CORDICx->CSR, CORDIC_CSR_IEN); +} + +/** + * @brief Disable CORDIC result ready interrupt + * @rmtoll CSR IEN LL_CORDIC_DisableIT + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_DisableIT(CORDIC_TypeDef *CORDICx) +{ + CLEAR_BIT(CORDICx->CSR, CORDIC_CSR_IEN); +} + +/** + * @brief Check CORDIC result ready interrupt state. + * @rmtoll CSR IEN LL_CORDIC_IsEnabledIT + * @param CORDICx CORDIC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CORDIC_IsEnabledIT(const CORDIC_TypeDef *CORDICx) +{ + return ((READ_BIT(CORDICx->CSR, CORDIC_CSR_IEN) == (CORDIC_CSR_IEN)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup CORDIC_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable CORDIC DMA read channel request. + * @rmtoll CSR DMAREN LL_CORDIC_EnableDMAReq_RD + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_EnableDMAReq_RD(CORDIC_TypeDef *CORDICx) +{ + SET_BIT(CORDICx->CSR, CORDIC_CSR_DMAREN); +} + +/** + * @brief Disable CORDIC DMA read channel request. + * @rmtoll CSR DMAREN LL_CORDIC_DisableDMAReq_RD + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_DisableDMAReq_RD(CORDIC_TypeDef *CORDICx) +{ + CLEAR_BIT(CORDICx->CSR, CORDIC_CSR_DMAREN); +} + +/** + * @brief Check CORDIC DMA read channel request state. + * @rmtoll CSR DMAREN LL_CORDIC_IsEnabledDMAReq_RD + * @param CORDICx CORDIC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CORDIC_IsEnabledDMAReq_RD(const CORDIC_TypeDef *CORDICx) +{ + return ((READ_BIT(CORDICx->CSR, CORDIC_CSR_DMAREN) == (CORDIC_CSR_DMAREN)) ? 1U : 0U); +} + +/** + * @brief Enable CORDIC DMA write channel request. + * @rmtoll CSR DMAWEN LL_CORDIC_EnableDMAReq_WR + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_EnableDMAReq_WR(CORDIC_TypeDef *CORDICx) +{ + SET_BIT(CORDICx->CSR, CORDIC_CSR_DMAWEN); +} + +/** + * @brief Disable CORDIC DMA write channel request. + * @rmtoll CSR DMAWEN LL_CORDIC_DisableDMAReq_WR + * @param CORDICx CORDIC Instance + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_DisableDMAReq_WR(CORDIC_TypeDef *CORDICx) +{ + CLEAR_BIT(CORDICx->CSR, CORDIC_CSR_DMAWEN); +} + +/** + * @brief Check CORDIC DMA write channel request state. + * @rmtoll CSR DMAWEN LL_CORDIC_IsEnabledDMAReq_WR + * @param CORDICx CORDIC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CORDIC_IsEnabledDMAReq_WR(const CORDIC_TypeDef *CORDICx) +{ + return ((READ_BIT(CORDICx->CSR, CORDIC_CSR_DMAWEN) == (CORDIC_CSR_DMAWEN)) ? 1U : 0U); +} + +/** + * @brief Get the CORDIC data register address used for DMA transfer. + * @rmtoll RDATA RES LL_CORDIC_DMA_GetRegAddr\n + * @rmtoll WDATA ARG LL_CORDIC_DMA_GetRegAddr + * @param CORDICx CORDIC Instance + * @param Direction parameter can be one of the following values: + * @arg @ref LL_CORDIC_DMA_REG_DATA_IN + * @arg @ref LL_CORDIC_DMA_REG_DATA_OUT + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_CORDIC_DMA_GetRegAddr(const CORDIC_TypeDef *CORDICx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_CORDIC_DMA_REG_DATA_OUT) + { + /* return address of RDATA register */ + data_reg_addr = (uint32_t) &(CORDICx->RDATA); + } + else + { + /* return address of WDATA register */ + data_reg_addr = (uint32_t) &(CORDICx->WDATA); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup CORDIC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check CORDIC result ready flag state. + * @rmtoll CSR RRDY LL_CORDIC_IsActiveFlag_RRDY + * @param CORDICx CORDIC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CORDIC_IsActiveFlag_RRDY(const CORDIC_TypeDef *CORDICx) +{ + return ((READ_BIT(CORDICx->CSR, CORDIC_CSR_RRDY) == (CORDIC_CSR_RRDY)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup CORDIC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write 32-bit input data for the CORDIC processing. + * @rmtoll WDATA ARG LL_CORDIC_WriteData + * @param CORDICx CORDIC Instance + * @param InData 0 .. 0xFFFFFFFF : 32-bit value to be provided as input data for CORDIC processing. + * @retval None + */ +__STATIC_INLINE void LL_CORDIC_WriteData(CORDIC_TypeDef *CORDICx, uint32_t InData) +{ + WRITE_REG(CORDICx->WDATA, InData); +} + +/** + * @brief Return 32-bit output data of CORDIC processing. + * @rmtoll RDATA RES LL_CORDIC_ReadData + * @param CORDICx CORDIC Instance + * @retval 32-bit output data of CORDIC processing. + */ +__STATIC_INLINE uint32_t LL_CORDIC_ReadData(const CORDIC_TypeDef *CORDICx) +{ + return (uint32_t)(READ_REG(CORDICx->RDATA)); +} + +/** + * @} + */ + + + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CORDIC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_CORDIC_DeInit(const CORDIC_TypeDef *CORDICx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CORDIC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_CORDIC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cortex.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cortex.h new file mode 100644 index 000000000..f9cbcea33 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_cortex.h @@ -0,0 +1,715 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + (+) API to enable and disable the MPU + (+) API to configure the region of MPU + (+) API to configure the attributes region of MPU + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_CORTEX_H +#define STM32H7RSxx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX LL Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK CORTEX LL SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0U /*!< AHB clock divided by 8 selected as SysTick + clock source */ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick + clock source */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT CORTEX LL Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF CORTEX LL MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION CORTEX LL MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 1U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 2U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 3U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 4U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 5U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 6U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 7U /*!< REGION Number 7 */ +#define LL_MPU_REGION_NUMBER8 8U /*!< REGION Number 8 */ +#define LL_MPU_REGION_NUMBER9 9U /*!< REGION Number 9 */ +#define LL_MPU_REGION_NUMBER10 10U /*!< REGION Number 10 */ +#define LL_MPU_REGION_NUMBER11 11U /*!< REGION Number 11 */ +#define LL_MPU_REGION_NUMBER12 12U /*!< REGION Number 12 */ +#define LL_MPU_REGION_NUMBER13 13U /*!< REGION Number 13 */ +#define LL_MPU_REGION_NUMBER14 14U /*!< REGION Number 14 */ +#define LL_MPU_REGION_NUMBER15 15U /*!< REGION Number 15 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE CORTEX LL MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B (0x04UL << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B (0x05UL << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B (0x06UL << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B (0x07UL << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08UL << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09UL << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AUL << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BUL << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CUL << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DUL << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EUL << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FUL << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10UL << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11UL << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12UL << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13UL << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14UL << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15UL << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16UL << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17UL << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18UL << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19UL << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AUL << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BUL << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CUL << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DUL << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EUL << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FUL << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES CORTEX LL MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (1U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (2U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (3U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (5U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (6U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX CORTEX LL MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (1U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (2U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (4U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS CORTEX LL MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS CORTEX LL MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS CORTEX LL MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS CORTEX LL MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX LL Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK CORTEX LL SYSTICK + * @brief CORTEX SYSTICK LL module driver + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + MODIFY_REG(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK, Source); +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE CORTEX LL LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Clear pending events. + * @retval None + */ +__STATIC_INLINE void LL_LPM_ClearEvent(void) +{ + __SEV(); + __WFE(); +} +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER CORTEX LL HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR USGFAULTENA LL_HANDLER_EnableFault\n + * SCB_SHCSR BUSFAULTENA LL_HANDLER_EnableFault\n + * SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR USGFAULTENA LL_HANDLER_DisableFault\n + * SCB_SHCSR BUSFAULTENA LL_HANDLER_DisableFault\n + * SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO CORTEX LL MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Architecture version + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture + * @retval Value should be equal to 0xF for Cortex-M7 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC27 for Cortex-M7 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MPU CORTEX LL MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param MPU_Control This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); /* Force any outstanding transfers to complete before enabling MPU */ + + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_Control | MPU_CTRL_ENABLE_Msk)); + + /* Ensure MPU settings take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register */ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Check if MPU region is enabled or not + * @rmtoll MPU_RNR ENABLE LL_MPU_IsEnabled_Region + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled_Region(uint32_t Region) +{ + /* Set region index */ + WRITE_REG(MPU->RNR, Region); + + /* Return MPU region status */ + return ((READ_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk) == (MPU_RASR_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configure and enable a MPU region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B + * or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB + * or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB + * or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB + * or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB + * or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO + * or @ref LL_MPU_REGION_FULL_ACCESS or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, + uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a MPU region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_CORTEX_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crc.h new file mode 100644 index 000000000..48ca3b228 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crc.h @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_crc.h + * @author MCD Application Team + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_CRC_H +#define STM32H7RSxx_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length + * @{ + */ +#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse + * @{ + */ +#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ +#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ +#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ +#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse + * @{ + */ +#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ +#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value + * @brief Normal representation of this polynomial value is + * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . + * @{ + */ +#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @note If Programmable Initial CRC value feature + * is available, also set the Data Register to the value stored in the + * CRC_INIT register, otherwise, reset Data Register to its default value. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + SET_BIT(CRCx->CR, CRC_CR_RESET); +} + +/** + * @brief Configure size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize + * @param CRCx CRC Instance + * @param PolySize This parameter can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) +{ + MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); +} + +/** + * @brief Return size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); +} + +/** + * @brief Configure the reversal of the bit order of the input data + * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); +} + +/** + * @brief Return type of reversal for input data bit order + * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + */ +__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); +} + +/** + * @brief Return type of reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + */ +__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); +} + +/** + * @brief Initialize the Programmable initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to write the correct value + * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. + * @rmtoll INIT INIT LL_CRC_SetInitialData + * @param CRCx CRC Instance + * @param InitCrc Value to be programmed in Programmable initial CRC value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) +{ + WRITE_REG(CRCx->INIT, InitCrc); +} + +/** + * @brief Return current Initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to read the correct value + * @rmtoll INIT INIT LL_CRC_GetInitialData + * @param CRCx CRC Instance + * @retval Value programmed in Programmable initial CRC value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetInitialData(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->INIT)); +} + +/** + * @brief Initialize the Programmable polynomial value + * (coefficients of the polynomial to be used for CRC calculation). + * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_SetPolynomialCoef + * @param CRCx CRC Instance + * @param PolynomCoef Value to be programmed in Programmable Polynomial value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) +{ + WRITE_REG(CRCx->POL, PolynomCoef); +} + +/** + * @brief Return current Programmable polynomial value + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_GetPolynomialCoef + * @param CRCx CRC Instance + * @retval Value programmed in Programmable Polynomial value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->POL)); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Write given 16-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData16 + * @param CRCx CRC Instance + * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) +{ + __IO uint16_t *pReg; + + pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = InData; +} + +/** + * @brief Write given 8-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData8 + * @param CRCx CRC Instance + * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) +{ + *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return current CRC calculation result. 16 bits value is returned. + * @note This function is expected to be used in a 16 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData16 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). + */ +__STATIC_INLINE uint16_t LL_CRC_ReadData16(const CRC_TypeDef *CRCx) +{ + return (uint16_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 8 bits value is returned. + * @note This function is expected to be used in a 8 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData8 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData8(const CRC_TypeDef *CRCx) +{ + return (uint8_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 7 bits value is returned. + * @note This function is expected to be used in a 7 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData7 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData7(const CRC_TypeDef *CRCx) +{ + return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_CRC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crs.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crs.h new file mode 100644 index 000000000..798fe074d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_crs.h @@ -0,0 +1,786 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_CRS_H +#define STM32H7RSxx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_OTG_FS CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source OTG_FS SOF (default) */ +#define LL_CRS_SYNC_SOURCE_OTG_HS (CRS_CFGR_SYNCSRC_1 | CRS_CFGR_SYNCSRC_0) /*!< Synchro Signal source OTG_HS SOF */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT 0x00000022U + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 32, which corresponds to the middle of the trimming interval. + * The trimming step is specified in the product datasheet. + * A higher TRIM value corresponds to a higher output frequency. + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 63 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 63 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 65535 (0xFFFF) + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 65535 (0xFFFF) + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_OTG_FS + * @arg @ref LL_CRS_SYNC_SOURCE_OTG_HS + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_OTG_FS + * @arg @ref LL_CRS_SYNC_SOURCE_OTG_HS + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 255 + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 65535 (0xFFFF) + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 + * or @ref LL_CRS_SYNC_DIV_8 or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 + * or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE + * or @ref LL_CRS_SYNC_SOURCE_OTG_FS or @ref LL_CRS_SYNC_SOURCE_OTG_HS + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, + uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)) ? 1UL : 0UL); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_CRS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dlyb.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dlyb.h new file mode 100644 index 000000000..df430ac59 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dlyb.h @@ -0,0 +1,143 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dlyb.h + * @author MCD Application Team + * @brief Header file of DelayBlock module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_DLYB_H +#define STM32H7RSxx_LL_DLYB_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_OSPI_MODULE_ENABLED) || defined(HAL_XSPI_MODULE_ENABLED) +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_OCTOSPI1) || defined (DLYB_OCTOSPI2) + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DLYB_LL DLYB + * @{ + */ + +/** + * @brief DLYB Configuration Structure definition + */ + +typedef struct +{ + uint32_t Units; /*!< Specifies the Delay of a unit delay cell. + This parameter can be a value between 0 and DLYB_MAX_UNIT */ + + uint32_t PhaseSel; /*!< Specifies the Phase for the output clock. + This parameter can be a value between 0 and DLYB_MAX_SELECT */ +} LL_DLYB_CfgTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DLYB_Exported_Constants DLYB Exported Constants + * @{ + */ + +#define DLYB_MAX_UNIT ((uint32_t)0x00000080U) /*!< Max UNIT value (128) */ +#define DLYB_MAX_SELECT ((uint32_t)0x0000000CU) /*!< Max SELECT value (12) */ + +/** + * @} + */ + +/** @defgroup DLYB_LL_Flags DLYB Flags + * @{ + */ + +#define DLYB_FLAG_LNGF DLYB_CFGR_LNGF + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DLYB_LL_Exported_Functions DLYB Exported Functions + * @{ + */ + +/** @defgroup DLYB_LL_Configuration Configuration functions + * @{ + */ + +/** + * @brief DLYB Enable + * @param DLYBx DLYB Instance + * @retval None + */ + +__STATIC_INLINE void LL_DLYB_Enable(DLYB_TypeDef *DLYBx) +{ + SET_BIT(DLYBx->CR, DLYB_CR_DEN); +} + +/** @brief Disable the DLYB. + * @param DLYBx DLYB Instance. + * @retval None + */ + +__STATIC_INLINE void LL_DLYB_Disable(DLYB_TypeDef *DLYBx) +{ + CLEAR_BIT(DLYBx->CR, DLYB_CR_DEN); +} + +/** + * @} + */ + +/** @defgroup DLYB_Control_Functions DLYB Control functions + * @{ + */ + +void LL_DLYB_SetDelay(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg); +void LL_DLYB_GetDelay(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg); +uint32_t LL_DLYB_GetClockPeriod(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DLYB_SDMMC1 || DLYB_SDMMC2 || DLYB_OCTOSPI1 || DLYB_OCTOSPI2 */ +#endif /* HAL_SD_MODULE_ENABLED || HAL_OSPI_MODULE_ENABLED || HAL_XSPI_MODULE_ENABLED */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_DLYB_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma.h new file mode 100644 index 000000000..28e82814d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma.h @@ -0,0 +1,6677 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### LL DMA driver acronyms ##### + ============================================================================== + [..] Acronyms table : + ========================================= + || Acronym || || + ========================================= + || SRC || Source || + || DEST || Destination || + || ADDR || Address || + || ADDRS || Addresses || + || INC || Increment / Incremented || + || DEC || Decrement / Decremented || + || BLK || Block || + || RPT || Repeat / Repeated || + || TRIG || Trigger || + ========================================= + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_DMA_H +#define STM32H7RSxx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if (defined (GPDMA1) || defined (HPDMA1)) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +#define DMA_CHANNEL0_OFFSET (0x00000050UL) +#define DMA_CHANNEL1_OFFSET (0x000000D0UL) +#define DMA_CHANNEL2_OFFSET (0x00000150UL) +#define DMA_CHANNEL3_OFFSET (0x000001D0UL) +#define DMA_CHANNEL4_OFFSET (0x00000250UL) +#define DMA_CHANNEL5_OFFSET (0x000002D0UL) +#define DMA_CHANNEL6_OFFSET (0x00000350UL) +#define DMA_CHANNEL7_OFFSET (0x000003D0UL) +#define DMA_CHANNEL8_OFFSET (0x00000450UL) +#define DMA_CHANNEL9_OFFSET (0x000004D0UL) +#define DMA_CHANNEL10_OFFSET (0x00000550UL) +#define DMA_CHANNEL11_OFFSET (0x000005D0UL) +#define DMA_CHANNEL12_OFFSET (0x00000650UL) +#define DMA_CHANNEL13_OFFSET (0x000006D0UL) +#define DMA_CHANNEL14_OFFSET (0x00000750UL) +#define DMA_CHANNEL15_OFFSET (0x000007D0UL) + +/* Array used to get the DMA Channel register offset versus Channel index LL_DMA_CHANNEL_x */ +static const uint32_t LL_DMA_CH_OFFSET_TAB[] = +{ + DMA_CHANNEL0_OFFSET, DMA_CHANNEL1_OFFSET, DMA_CHANNEL2_OFFSET, DMA_CHANNEL3_OFFSET, + DMA_CHANNEL4_OFFSET, DMA_CHANNEL5_OFFSET, DMA_CHANNEL6_OFFSET, DMA_CHANNEL7_OFFSET, + DMA_CHANNEL8_OFFSET, DMA_CHANNEL9_OFFSET, DMA_CHANNEL10_OFFSET, DMA_CHANNEL11_OFFSET, + DMA_CHANNEL12_OFFSET, DMA_CHANNEL13_OFFSET, DMA_CHANNEL14_OFFSET, DMA_CHANNEL15_OFFSET, +}; + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ + +/** + * @brief LL DMA init structure definition. + */ +typedef struct +{ + uint32_t SrcAddress; /*!< This field specify the data transfer source address. + Programming this field is mandatory for all available DMA channels. + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcAddress(). */ + + uint32_t DestAddress; /*!< This field specify the data transfer destination address. + Programming this field is mandatory for all available DMA channels. + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestAddress(). */ + + uint32_t Direction; /*!< This field specify the data transfer direction. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRANSFER_DIRECTION. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t BlkHWRequest; /*!< This field specify the hardware request unity. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_BLKHW_REQUEST. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkHWRequest(). */ + + uint32_t DataAlignment; /*!< This field specify the transfer data alignment. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DATA_ALIGNMENT. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDataAlignment(). */ + + uint32_t SrcBurstLength; /*!< This field specify the source burst length of transfer in bytes. + Programming this field is mandatory for all available DMA channels. + This parameter must be a value between Min_Data = 1 and Max_Data = 64. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcBurstLength(). */ + + uint32_t DestBurstLength; /*!< This field specify the destination burst length of transfer in bytes. + Programming this field is mandatory for all available DMA channels. + This parameter must be a value between Min_Data = 1 and Max_Data = 64. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestBurstLength(). */ + + uint32_t SrcDataWidth; /*!< This field specify the source data width. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_DATA_WIDTH. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcDataWidth(). */ + + uint32_t DestDataWidth; /*!< This field specify the destination data width. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_DATA_WIDTH. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestDataWidth(). */ + + uint32_t SrcIncMode; /*!< This field specify the source burst increment mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_INCREMENT_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcIncMode(). */ + + uint32_t DestIncMode; /*!< This field specify the destination burst increment mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_INCREMENT_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestIncMode(). */ + + uint32_t Priority; /*!< This field specify the channel priority level. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY_LEVEL. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetChannelPriorityLevel(). */ + + uint32_t BlkDataLength; /*!< This field specify the length of a block transfer in bytes. + Programming this field is mandatory for all available DMA channels. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkDataLength(). */ + + uint32_t BlkRptCount; /*!< This field specify the number of repetitions of the current block. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value between 1 and 2048 Min_Data = 0 + and Max_Data = 0x000007FF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkRptCount(). */ + + uint32_t TriggerMode; /*!< This field specify the trigger mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetTriggerMode(). */ + + uint32_t TriggerPolarity; /*!< This field specify the trigger event polarity. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_POLARITY. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetTriggerPolarity(). */ + + uint32_t TriggerSelection; /*!< This field specify the trigger event selection. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_SELECTION. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetHWTrigger(). */ + + uint32_t Request; /*!< This field specify the peripheral request selection. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_REQUEST_SELECTION. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t TransferEventMode; /*!< This field specify the transfer event mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRANSFER_EVENT_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetTransferEventMode(). */ + + uint32_t DestWordExchange; /*!< This field specify the destination word exchange. + Programming this field is mandatory for all available HPDMA channels. + This parameter can be a value of @ref DMA_LL_EC_DEST_WORD_EXCHANGE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestWordExchange(). */ + + uint32_t DestHWordExchange; /*!< This field specify the destination half word exchange. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DEST_HALFWORD_EXCHANGE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestHWordExchange(). */ + + uint32_t DestByteExchange; /*!< This field specify the destination byte exchange. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DEST_BYTE_EXCHANGE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestByteExchange(). */ + + uint32_t SrcByteExchange; /*!< This field specify the source byte exchange. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_SRC_BYTE_EXCHANGE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcByteExchange(). */ + + uint32_t SrcAllocatedPort; /*!< This field specify the source allocated port. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_ALLOCATED_PORT. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcAllocatedPort(). */ + + uint32_t DestAllocatedPort; /*!< This field specify the destination allocated port. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_ALLOCATED_PORT. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestAllocatedPort(). */ + + uint32_t LinkAllocatedPort; /*!< This field specify the linked-list allocated port. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_LINKED_LIST_ALLOCATED_PORT. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkAllocatedPort(). */ + + uint32_t LinkStepMode; /*!< This field specify the link step mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_LINK_STEP_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkStepMode(). */ + + uint32_t SrcAddrUpdateMode; /*!< This field specify the source address update mode. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value of @ref DMA_LL_EC_SRC_ADDR_UPDATE_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcAddrUpdate(). */ + + uint32_t DestAddrUpdateMode; /*!< This field specify the destination address update mode. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value of @ref DMA_LL_EC_DEST_ADDR_UPDATE_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestAddrUpdate(). */ + + uint32_t SrcAddrOffset; /*!< This field specifies the source address offset. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value Between 0 to 0x00001FFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetSrcAddrUpdateValue(). */ + + uint32_t DestAddrOffset; /*!< This field specifies the destination address offset. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value Between 0 to 0x00001FFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDestAddrUpdateValue(). */ + + uint32_t BlkRptSrcAddrUpdateMode; /*!< This field specifies the block repeat source address update mode. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value of @ref DMA_LL_EC_BLK_RPT_SRC_ADDR_UPDATE_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkRptSrcAddrUpdate(). */ + + uint32_t BlkRptDestAddrUpdateMode; /*!< This field specifies the block repeat destination address update mode. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value of @ref DMA_LL_EC_BLK_RPT_DEST_ADDR_UPDATE_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkRptDestAddrUpdate(). */ + + uint32_t BlkRptSrcAddrOffset; /*!< This field specifies the block repeat source address offset. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value Between 0 to 0x0000FFFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkRptSrcAddrUpdateValue(). */ + + uint32_t BlkRptDestAddrOffset; /*!< This field specifies the block repeat destination address offset. + Programming this field is mandatory only for 2D addressing channels. + This parameter can be a value Between 0 to 0x0000FFFF. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetBlkRptDestAddrUpdateValue(). */ + + uint32_t LinkedListBaseAddr; /*!< This field specify the linked list base address. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value Between 0 to 0xFFFF0000 (where the 4 first + bytes are always forced to 0). + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkedListBaseAddr(). */ + + uint32_t LinkedListAddrOffset; /*!< Specifies the linked list address offset. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value Between 0 to 0x0000FFFC. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkedListAddrOffset(). */ + + uint32_t Mode; /*!< Specifies the transfer mode for the DMA channel. + This parameter can be a value of @ref DMA_LL_TRANSFER_MODE */ +} LL_DMA_InitTypeDef; + + +/** + * @brief LL DMA init linked list structure definition. + */ +typedef struct +{ + uint32_t Priority; /*!< This field specify the channel priority level. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY_LEVEL. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetChannelPriorityLevel(). */ + + uint32_t LinkStepMode; /*!< This field specify the link step mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_LINK_STEP_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkStepMode(). */ + + uint32_t LinkAllocatedPort; /*!< This field specify the linked-list allocated port. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_LINKED_LIST_ALLOCATED_PORT. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetLinkAllocatedPort(). */ + + uint32_t TransferEventMode; /*!< This field specify the transfer event mode. + Programming this field is mandatory for all available DMA channels. + This parameter can be a value of @ref DMA_LL_EC_TRANSFER_EVENT_MODE. + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetTransferEventMode(). */ +} LL_DMA_InitLinkedListTypeDef; + + +/** + * @brief LL DMA node init structure definition. + */ +typedef struct +{ + /* CTR1 register fields ****************************************************** + If any CTR1 fields need to be updated comparing to previous node, it is + mandatory to update the new value in CTR1 register fields and enable update + CTR1 register in UpdateRegisters fields if it is not enabled in the + previous node. + + */ + uint32_t DestAllocatedPort; /*!< This field specify the destination allocated port. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_ALLOCATED_PORT. */ + + uint32_t DestWordExchange; /*!< This field specify the destination word exchange. + This parameter can be a value of @ref DMA_LL_EC_DEST_WORD_EXCHANGE. */ + + uint32_t DestHWordExchange; /*!< This field specify the destination half word exchange. + This parameter can be a value of @ref DMA_LL_EC_DEST_HALFWORD_EXCHANGE. */ + + uint32_t DestByteExchange; /*!< This field specify the destination byte exchange. + This parameter can be a value of @ref DMA_LL_EC_DEST_BYTE_EXCHANGE. */ + + uint32_t DestBurstLength; /*!< This field specify the destination burst length of transfer in bytes. + This parameter must be a value between Min_Data = 1 and Max_Data = 64. */ + + uint32_t DestIncMode; /*!< This field specify the destination increment mode. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_INCREMENT_MODE. */ + + uint32_t DestDataWidth; /*!< This field specify the destination data width. + This parameter can be a value of @ref DMA_LL_EC_DESTINATION_DATA_WIDTH. */ + + uint32_t SrcAllocatedPort; /*!< This field specify the source allocated port. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_ALLOCATED_PORT. */ + + uint32_t SrcByteExchange; /*!< This field specify the source byte exchange. + This parameter can be a value of @ref DMA_LL_EC_SRC_BYTE_EXCHANGE. */ + + uint32_t DataAlignment; /*!< This field specify the transfer data alignment. + This parameter can be a value of @ref DMA_LL_EC_DATA_ALIGNMENT. */ + + uint32_t SrcBurstLength; /*!< This field specify the source burst length of transfer in bytes. + This parameter must be a value between Min_Data = 1 and Max_Data = 64. */ + + uint32_t SrcIncMode; /*!< This field specify the source increment mode. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_INCREMENT_MODE. */ + + uint32_t SrcDataWidth; /*!< This field specify the source data width. + This parameter can be a value of @ref DMA_LL_EC_SOURCE_DATA_WIDTH. */ + + + /* CTR2 register fields ****************************************************** + If any CTR2 fields need to be updated comparing to previous node, it is + mandatory to update the new value in CTR2 register fields and enable update + CTR2 register in UpdateRegisters fields if it is not enabled in the + previous node. + + For all node created, filling all fields is mandatory. + */ + uint32_t TransferEventMode; /*!< This field specify the transfer event mode. + This parameter can be a value of @ref DMA_LL_EC_TRANSFER_EVENT_MODE. */ + + uint32_t TriggerPolarity; /*!< This field specify the trigger event polarity. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_POLARITY. */ + + uint32_t TriggerSelection; /*!< This field specify the trigger event selection. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_SELECTION. */ + + uint32_t TriggerMode; /*!< This field specify the trigger mode. + This parameter can be a value of @ref DMA_LL_EC_TRIGGER_MODE. */ + + uint32_t BlkHWRequest; /*!< This field specify the hardware request unity. + This parameter can be a value of @ref DMA_LL_EC_BLKHW_REQUEST. */ + + uint32_t Direction; /*!< This field specify the transfer direction. + This parameter can be a value of @ref DMA_LL_EC_TRANSFER_DIRECTION. */ + + uint32_t Request; /*!< This field specify the peripheral request selection. + This parameter can be a value of @ref DMA_LL_EC_REQUEST_SELECTION. */ + + uint32_t Mode; /*!< This field DMA Transfer Mode. + This parameter can be a value of @ref DMA_LL_TRANSFER_MODE. */ + + /* CBR1 register fields ****************************************************** + If any CBR1 fields need to be updated comparing to previous node, it is + mandatory to update the new value in CBR1 register fields and enable update + CBR1 register in UpdateRegisters fields if it is not enabled in the + previous node. + + If the node to be created is not for 2D addressing channels, there is no + need to fill the following fields for CBR1 register : + - BlkReptDestAddrUpdate. + - BlkRptSrcAddrUpdate. + - DestAddrUpdate. + - SrcAddrUpdate. + - BlkRptCount. + */ + uint32_t BlkRptDestAddrUpdateMode; /*!< This field specifies the block repeat destination address update mode. + This parameter can be a value of + @ref DMA_LL_EC_BLK_RPT_DEST_ADDR_UPDATE_MODE. */ + + uint32_t BlkRptSrcAddrUpdateMode; /*!< This field specifies the block repeat source address update mode. + This parameter can be a value of + @ref DMA_LL_EC_BLK_RPT_SRC_ADDR_UPDATE_MODE. */ + + uint32_t DestAddrUpdateMode; /*!< This field specify the Destination address update mode. + This parameter can be a value of @ref DMA_LL_EC_DEST_ADDR_UPDATE_MODE. */ + + uint32_t SrcAddrUpdateMode; /*!< This field specify the Source address update mode. + This parameter can be a value of @ref DMA_LL_EC_SRC_ADDR_UPDATE_MODE. */ + + uint32_t BlkRptCount; /*!< This field specify the number of repetitions of the current block. + This parameter can be a value between 1 and 2048 Min_Data = 0 + and Max_Data = 0x000007FF. */ + + uint32_t BlkDataLength; /*!< This field specify the length of a block transfer in bytes. + This parameter must be a value between Min_Data = 0 + and Max_Data = 0x0000FFFF. */ + + /* CSAR register fields ****************************************************** + If any CSAR fields need to be updated comparing to previous node, it is + mandatory to update the new value in CSAR register fields and enable update + CSAR register in UpdateRegisters fields if it is not enabled in the + previous node. + + For all node created, filling all fields is mandatory. + */ + uint32_t SrcAddress; /*!< This field specify the transfer source address. + This parameter must be a value between Min_Data = 0 + and Max_Data = 0xFFFFFFFF. */ + + + /* CDAR register fields ****************************************************** + If any CDAR fields need to be updated comparing to previous node, it is + mandatory to update the new value in CDAR register fields and enable update + CDAR register in UpdateRegisters fields if it is not enabled in the + previous node. + + For all node created, filling all fields is mandatory. + */ + uint32_t DestAddress; /*!< This field specify the transfer destination address. + This parameter must be a value between Min_Data = 0 + and Max_Data = 0xFFFFFFFF. */ + + /* CTR3 register fields ****************************************************** + If any CTR3 fields need to be updated comparing to previous node, it is + mandatory to update the new value in CTR3 register fields and enable update + CTR3 register in UpdateRegisters fields if it is not enabled in the + previous node. + + This register is used only for 2D addressing channels. + If used channel is linear addressing, this register will be overwritten by + CLLR register in memory. + When this register is enabled on UpdateRegisters and the selected channel + is linear addressing, LL APIs will discard this register update in memory. + */ + uint32_t DestAddrOffset; /*!< This field specifies the destination address offset. + This parameter can be a value Between 0 to 0x00001FFF. */ + + uint32_t SrcAddrOffset; /*!< This field specifies the source address offset. + This parameter can be a value Between 0 to 0x00001FFF. */ + + + /* CBR2 register fields ****************************************************** + If any CBR2 fields need to be updated comparing to previous node, it is + mandatory to update the new value in CBR2 register fields and enable update + CBR2 register in UpdateRegisters fields if it is not enabled in the + previous node. + + This register is used only for 2D addressing channels. + If used channel is linear addressing, this register will be discarded in + memory. When this register is enabled on UpdateRegisters and the selected + channel is linear addressing, LL APIs will discard this register update in + memory. + */ + uint32_t BlkRptDestAddrOffset; /*!< This field specifies the block repeat destination address offset. + This parameter can be a value Between 0 to 0x0000FFFF. */ + + uint32_t BlkRptSrcAddrOffset; /*!< This field specifies the block repeat source address offset. + This parameter can be a value Between 0 to 0x0000FFFF. */ + + /* CLLR register fields ****************************************************** + If any CLLR fields need to be updated comparing to previous node, it is + mandatory to update the new value in CLLR register fields and enable update + CLLR register in UpdateRegisters fields if it is not enabled in the + previous node. + + If used channel is linear addressing, there is no need to enable/disable + CTR3 and CBR2 register in UpdateRegisters fields as they will be discarded + by LL APIs. + */ + uint32_t UpdateRegisters; /*!< Specifies the linked list register update. + This parameter can be a value of @ref DMA_LL_EC_LINKEDLIST_REGISTER_UPDATE. */ + + /* DMA Node type field ******************************************************* + This parameter defines node types as node size and node content varies + between channels. + Thanks to this fields, linked list queue could be created independently + from channel selection. So, one queue could be executed by all DMA channels. + */ + uint32_t NodeType; /*!< Specifies the node type to be created. + This parameter can be a value of @ref DMA_LL_EC_LINKEDLIST_NODE_TYPE. */ +} LL_DMA_InitNodeTypeDef; + +/** + * @brief LL DMA linked list node structure definition. + * @note For 2D addressing channels, the maximum node size is : + * (4 Bytes * 8 registers = 32 Bytes). + * For GPDMA & HPDMA linear addressing channels, the maximum node size is : + * (4 Bytes * 6 registers = 24 Bytes). + */ +typedef struct +{ + __IO uint32_t LinkRegisters[8U]; + +} LL_DMA_LinkNodeTypeDef; +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_LL_EC_CHANNEL Channel + * @{ + */ +#define LL_DMA_CHANNEL_0 (0x00U) +#define LL_DMA_CHANNEL_1 (0x01U) +#define LL_DMA_CHANNEL_2 (0x02U) +#define LL_DMA_CHANNEL_3 (0x03U) +#define LL_DMA_CHANNEL_4 (0x04U) +#define LL_DMA_CHANNEL_5 (0x05U) +#define LL_DMA_CHANNEL_6 (0x06U) +#define LL_DMA_CHANNEL_7 (0x07U) +#define LL_DMA_CHANNEL_8 (0x08U) +#define LL_DMA_CHANNEL_9 (0x09U) +#define LL_DMA_CHANNEL_10 (0x0AU) +#define LL_DMA_CHANNEL_11 (0x0BU) +#define LL_DMA_CHANNEL_12 (0x0CU) +#define LL_DMA_CHANNEL_13 (0x0DU) +#define LL_DMA_CHANNEL_14 (0x0EU) +#define LL_DMA_CHANNEL_15 (0x0FU) +#if defined (USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL (0x10U) +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EC_CLLR_OFFSET CLLR offset + * @{ + */ +#define LL_DMA_CLLR_OFFSET0 (0x00U) +#define LL_DMA_CLLR_OFFSET1 (0x01U) +#define LL_DMA_CLLR_OFFSET2 (0x02U) +#define LL_DMA_CLLR_OFFSET3 (0x03U) +#define LL_DMA_CLLR_OFFSET4 (0x04U) +#define LL_DMA_CLLR_OFFSET5 (0x05U) +#define LL_DMA_CLLR_OFFSET6 (0x06U) +#define LL_DMA_CLLR_OFFSET7 (0x07U) +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup DMA_LL_EC_PRIORITY_LEVEL Priority Level + * @{ + */ +#define LL_DMA_LOW_PRIORITY_LOW_WEIGHT 0x00000000U /*!< Priority level : Low Priority, Low Weight */ +#define LL_DMA_LOW_PRIORITY_MID_WEIGHT DMA_CCR_PRIO_0 /*!< Priority level : Low Priority, Mid Weight */ +#define LL_DMA_LOW_PRIORITY_HIGH_WEIGHT DMA_CCR_PRIO_1 /*!< Priority level : Low Priority, High Weight */ +#define LL_DMA_HIGH_PRIORITY DMA_CCR_PRIO /*!< Priority level : High Priority */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_LINKED_LIST_ALLOCATED_PORT Linked List Allocated Port + * @{ + */ +#define LL_DMA_LINK_ALLOCATED_PORT0 0x00000000U /*!< Linked List Allocated Port 0 */ +#define LL_DMA_LINK_ALLOCATED_PORT1 DMA_CCR_LAP /*!< Linked List Allocated Port 1 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_LINK_STEP_MODE Link Step Mode + * @{ + */ +#define LL_DMA_LSM_FULL_EXECUTION 0x00000000U /*!< Channel execute the full linked list */ +#define LL_DMA_LSM_1LINK_EXECUTION DMA_CCR_LSM /*!< Channel execute one node of the linked list */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DEST_WORD_EXCHANGE Destination Word Exchange + * @{ + */ +#define LL_DMA_DEST_WORD_PRESERVE 0x00000000U /*!< No destination Word exchange when destination data width + is double-word */ +#define LL_DMA_DEST_WORD_EXCHANGE DMA_CTR1_DWX /*!< Destination Word exchange when destination data width + is double-word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DEST_HALFWORD_EXCHANGE Destination Half-Word Exchange + * @{ + */ +#define LL_DMA_DEST_HALFWORD_PRESERVE 0x00000000U /*!< No destination Half-Word exchange when destination data width + is word */ +#define LL_DMA_DEST_HALFWORD_EXCHANGE DMA_CTR1_DHX /*!< Destination Half-Word exchange when destination data width + is word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DEST_BYTE_EXCHANGE Destination Byte Exchange + * @{ + */ +#define LL_DMA_DEST_BYTE_PRESERVE 0x00000000U /*!< No destination Byte exchange when destination data width > Byte */ +#define LL_DMA_DEST_BYTE_EXCHANGE DMA_CTR1_DBX /*!< Destination Byte exchange when destination data width > Byte */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_SRC_BYTE_EXCHANGE Source Byte Exchange + * @{ + */ +#define LL_DMA_SRC_BYTE_PRESERVE 0x00000000U /*!< No source Byte exchange when source data width is word */ +#define LL_DMA_SRC_BYTE_EXCHANGE DMA_CTR1_SBX /*!< Source Byte exchange when source data width is word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_SOURCE_ALLOCATED_PORT Source Allocated Port + * @{ + */ +#define LL_DMA_SRC_ALLOCATED_PORT0 0x00000000U /*!< Source Allocated Port 0 */ +#define LL_DMA_SRC_ALLOCATED_PORT1 DMA_CTR1_SAP /*!< Source Allocated Port 1 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DESTINATION_ALLOCATED_PORT Destination Allocated Port + * @{ + */ +#define LL_DMA_DEST_ALLOCATED_PORT0 0x00000000U /*!< Destination Allocated Port 0 */ +#define LL_DMA_DEST_ALLOCATED_PORT1 DMA_CTR1_DAP /*!< Destination Allocated Port 1 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DESTINATION_INCREMENT_MODE Destination Increment Mode + * @{ + */ +#define LL_DMA_DEST_FIXED 0x00000000U /*!< Destination fixed single/burst */ +#define LL_DMA_DEST_INCREMENT DMA_CTR1_DINC /*!< Destination incremented single/burst */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DESTINATION_DATA_WIDTH Destination Data Width + * @{ + */ +#define LL_DMA_DEST_DATAWIDTH_BYTE 0x00000000U /*!< Destination Data Width : Byte */ +#define LL_DMA_DEST_DATAWIDTH_HALFWORD DMA_CTR1_DDW_LOG2_0 /*!< Destination Data Width : HalfWord */ +#define LL_DMA_DEST_DATAWIDTH_WORD DMA_CTR1_DDW_LOG2_1 /*!< Destination Data Width : Word */ +#define LL_DMA_DEST_DATAWIDTH_DOUBLEWORD DMA_CTR1_DDW_LOG2 /*!< Destination Data Width : DoubleWord */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DATA_ALIGNMENT Data Alignment + * @{ + */ +#define LL_DMA_DATA_ALIGN_ZEROPADD 0x00000000U /*!< If src data width < dest data width : + => Right Aligned padded with 0 up to destination + data width. + If src data width > dest data width : + => Right Aligned Left Truncated down to destination + data width. */ +#define LL_DMA_DATA_ALIGN_SIGNEXTPADD DMA_CTR1_PAM_0 /*!< If src data width < dest data width : + => Right Aligned padded with sign extended up to destination + data width. + If src data width > dest data width : + => Left Aligned Right Truncated down to the destination + data width */ +#define LL_DMA_DATA_PACK_UNPACK DMA_CTR1_PAM_1 /*!< If src data width < dest data width : + => Packed at the destination data width + If src data width > dest data width : + => Unpacked at the destination data width */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_SOURCE_INCREMENT_MODE Source Increment Mode + * @{ + */ +#define LL_DMA_SRC_FIXED 0x00000000U /*!< Source fixed single/burst */ +#define LL_DMA_SRC_INCREMENT DMA_CTR1_SINC /*!< Source incremented single/burst */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_SOURCE_DATA_WIDTH Source Data Width + * @{ + */ +#define LL_DMA_SRC_DATAWIDTH_BYTE 0x00000000U /*!< Source Data Width : Byte */ +#define LL_DMA_SRC_DATAWIDTH_HALFWORD DMA_CTR1_SDW_LOG2_0 /*!< Source Data Width : HalfWord */ +#define LL_DMA_SRC_DATAWIDTH_WORD DMA_CTR1_SDW_LOG2_1 /*!< Source Data Width : Word */ +#define LL_DMA_SRC_DATAWIDTH_DOUBLEWORD DMA_CTR1_SDW_LOG2 /*!< Source Data Width : DoubleWord */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_BLKHW_REQUEST Block Hardware Request + * @{ + */ +#define LL_DMA_HWREQUEST_SINGLEBURST 0x00000000U /*!< Hardware request is driven by a peripheral with a hardware + request/acknowledge protocol at a burst level */ +#define LL_DMA_HWREQUEST_BLK DMA_CTR2_BREQ /*!< Hardware request is driven by a peripheral with a hardware + request/acknowledge protocol at a block level */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_TRANSFER_EVENT_MODE Transfer Event Mode + * @{ + */ +#define LL_DMA_TCEM_BLK_TRANSFER 0x00000000U /*!< The TC (and the HT) event is generated at the + (respectively half) end of each block */ +#define LL_DMA_TCEM_RPT_BLK_TRANSFER DMA_CTR2_TCEM_0 /*!< The TC (and the HT) event is generated at the + (respectively half) end of the repeated block */ +#define LL_DMA_TCEM_EACH_LLITEM_TRANSFER DMA_CTR2_TCEM_1 /*!< The TC (and the HT) event is generated at the + (respectively half) end of each linked-list item */ +#define LL_DMA_TCEM_LAST_LLITEM_TRANSFER DMA_CTR2_TCEM /*!< The TC (and the HT) event is generated at the + (respectively half) end of the last linked-list item */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_TRIGGER_POLARITY Trigger Polarity + * @{ + */ +#define LL_DMA_TRIG_POLARITY_MASKED 0x00000000U /*!< No trigger of the selected DMA request. + Masked trigger event */ +#define LL_DMA_TRIG_POLARITY_RISING DMA_CTR2_TRIGPOL_0 /*!< Trigger of the selected DMA request on the rising + edge of the selected trigger event input */ +#define LL_DMA_TRIG_POLARITY_FALLING DMA_CTR2_TRIGPOL_1 /*!< Trigger of the selected DMA request on the falling + edge of the selected trigger event input */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_TRIGGER_MODE Transfer Trigger Mode + * @{ + */ +#define LL_DMA_TRIGM_BLK_TRANSFER 0x00000000U /*!< A block transfer is conditioned by (at least) + one hit trigger */ +#define LL_DMA_TRIGM_RPT_BLK_TRANSFER DMA_CTR2_TRIGM_0 /*!< A repeated block transfer is conditioned by (at least) + one hit trigger */ +#define LL_DMA_TRIGM_LLI_LINK_TRANSFER DMA_CTR2_TRIGM_1 /*!< A LLI link transfer is conditioned by (at least) + one hit trigger */ +#define LL_DMA_TRIGM_SINGLBURST_TRANSFER DMA_CTR2_TRIGM /*!< A Single/Burst transfer is conditioned by (at least) + one hit trigger */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_TRANSFER_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CTR2_SWREQ /*!< Memory to memory direction */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CTR2_DREQ /*!< Memory to peripheral direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_DMA_NORMAL 0x00000000U /*!< Normal DMA transfer */ +#define LL_DMA_PFCTRL DMA_CTR2_PFREQ /*!< HW request peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_BLK_RPT_SRC_ADDR_UPDATE_MODE Block Repeat Source Address Update Mode + * @{ + */ +#define LL_DMA_BLKRPT_SRC_ADDR_INCREMENT 0x00000000U /*!< Source address pointer is incremented after each block + transfer by source update value */ +#define LL_DMA_BLKRPT_SRC_ADDR_DECREMENT DMA_CBR1_BRSDEC /*!< Source address pointer is decremented after each block + transfer by source update value */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_BLK_RPT_DEST_ADDR_UPDATE_MODE Block Repeat Destination Address Update Mode + * @{ + */ +#define LL_DMA_BLKRPT_DEST_ADDR_INCREMENT 0x00000000U /*!< Destination address is incremented after each block + transfer by destination update value */ +#define LL_DMA_BLKRPT_DEST_ADDR_DECREMENT DMA_CBR1_BRDDEC /*!< Destination address is decremented after each block + transfer by destination update value */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_SRC_ADDR_UPDATE_MODE Burst Source Address Update Mode + * @{ + */ +#define LL_DMA_BURST_SRC_ADDR_INCREMENT 0x00000000U /*!< Source address pointer is incremented after each burst + transfer by source update value */ +#define LL_DMA_BURST_SRC_ADDR_DECREMENT DMA_CBR1_SDEC /*!< Source address pointer is decremented after each burst + transfer by source update value */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DEST_ADDR_UPDATE_MODE Burst Destination Address Update Mode + * @{ + */ +#define LL_DMA_BURST_DEST_ADDR_INCREMENT 0x00000000U /*!< Destination address pointer is incremented after each + burst transfer by destination update value */ +#define LL_DMA_BURST_DEST_ADDR_DECREMENT DMA_CBR1_DDEC /*!< Destination address pointer is decremented after each + burst transfer by destination update value */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_LINKEDLIST_NODE_TYPE Linked list node type + * @{ + */ +#define LL_DMA_GPDMA_LINEAR_NODE 0x01U /*!< GPDMA node : linear addressing node */ +#define LL_DMA_GPDMA_2D_NODE 0x02U /*!< GPDMA node : 2 dimension addressing node */ +#define LL_DMA_HPDMA_LINEAR_NODE 0x04U /*!< HPDMA node : linear addressing node */ +#define LL_DMA_HPDMA_2D_NODE 0x08U /*!< HPDMA node : 2 dimension addressing node */ + +/** + * @} + */ + +/** @defgroup DMA_LL_EC_LINKEDLIST_REGISTER_UPDATE Linked list register update + * @{ + */ +#define LL_DMA_UPDATE_CTR1 DMA_CLLR_UT1 /*!< Update CTR1 register from memory : + available for all DMA channels */ +#define LL_DMA_UPDATE_CTR2 DMA_CLLR_UT2 /*!< Update CTR2 register from memory : + available for all DMA channels */ +#define LL_DMA_UPDATE_CBR1 DMA_CLLR_UB1 /*!< Update CBR1 register from memory : + available for all DMA channels */ +#define LL_DMA_UPDATE_CSAR DMA_CLLR_USA /*!< Update CSAR register from memory : + available for all DMA channels */ +#define LL_DMA_UPDATE_CDAR DMA_CLLR_UDA /*!< Update CDAR register from memory : + available for all DMA channels */ +#define LL_DMA_UPDATE_CTR3 DMA_CLLR_UT3 /*!< Update CTR3 register from memory : + available only for 2D addressing DMA channels */ +#define LL_DMA_UPDATE_CBR2 DMA_CLLR_UB2 /*!< Update CBR2 register from memory : + available only for 2D addressing DMA channels */ +#define LL_DMA_UPDATE_CLLR DMA_CLLR_ULL /*!< Update CLLR register from memory : + available for all DMA channels */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_REQUEST_SELECTION Request Selection + * @{ + */ +/* HPDMA1 requests */ +#define LL_HPDMA1_REQUEST_JPEG_RX 0U /*!< HPDMA1 HW request is JPEG_RX */ +#define LL_HPDMA1_REQUEST_JPEG_TX 1U /*!< HPDMA1 HW request is JPEG_TX */ +#define LL_HPDMA1_REQUEST_XSPI1 2U /*!< HPDMA1 HW request is XSPI1 */ +#define LL_HPDMA1_REQUEST_XSPI2 3U /*!< HPDMA1 HW request is XSPI2 */ +#define LL_HPDMA1_REQUEST_SPI3_RX 4U /*!< HPDMA1 HW request is SPI3_RX */ +#define LL_HPDMA1_REQUEST_SPI3_TX 5U /*!< HPDMA1 HW request is SPI3_TX */ +#define LL_HPDMA1_REQUEST_SPI4_RX 6U /*!< HPDMA1 HW request is SPI4_RX */ +#define LL_HPDMA1_REQUEST_SPI4_TX 7U /*!< HPDMA1 HW request is SPI4_TX */ +#define LL_HPDMA1_REQUEST_ADC1 8U /*!< HPDMA1 HW request is ADC1 */ +#define LL_HPDMA1_REQUEST_ADC2 9U /*!< HPDMA1 HW request is ADC2 */ +#define LL_HPDMA1_REQUEST_ADF1_FLT0 10U /*!< HPDMA1 HW request is ADF1_FLT0 */ +#define LL_HPDMA1_REQUEST_UART4_RX 11U /*!< HPDMA1 HW request is UART4_RX */ +#define LL_HPDMA1_REQUEST_UART4_TX 12U /*!< HPDMA1 HW request is UART4_TX */ +#define LL_HPDMA1_REQUEST_UART5_RX 13U /*!< HPDMA1 HW request is UART5_RX */ +#define LL_HPDMA1_REQUEST_UART5_TX 14U /*!< HPDMA1 HW request is UART5_TX */ +#define LL_HPDMA1_REQUEST_UART7_RX 15U /*!< HPDMA1 HW request is UART7_RX */ +#define LL_HPDMA1_REQUEST_UART7_TX 16U /*!< HPDMA1 HW request is UART7_TX */ +#define LL_HPDMA1_REQUEST_LPTIM2_IC1 17U /*!< HPDMA1 HW request is LPTIM2_IC1 */ +#define LL_HPDMA1_REQUEST_LPTIM2_IC2 18U /*!< HPDMA1 HW request is LPTIM2_IC2 */ +#define LL_HPDMA1_REQUEST_LPTIM2_UE 19U /*!< HPDMA1 HW request is LPTIM2_UE */ + +/* GPDMA1 requests */ +#define LL_GPDMA1_REQUEST_ADC1 0U /*!< GPDMA1 HW request is ADC1 */ +#define LL_GPDMA1_REQUEST_ADC2 1U /*!< GPDMA1 HW request is ADC2 */ +#define LL_GPDMA1_REQUEST_CRYP_IN 2U /*!< GPDMA1 HW request is CRYP_IN */ +#define LL_GPDMA1_REQUEST_CRYP_OUT 3U /*!< GPDMA1 HW request is CRYP_OUT */ +#define LL_GPDMA1_REQUEST_SAES_IN 4U /*!< GPDMA1 HW request is SAES_IN */ +#define LL_GPDMA1_REQUEST_SAES_OUT 5U /*!< GPDMA1 HW request is SAES_OUT */ +#define LL_GPDMA1_REQUEST_HASH_IN 6U /*!< GPDMA1 HW request is HASH_IN */ +#define LL_GPDMA1_REQUEST_TIM1_CH1 7U /*!< GPDMA1 HW request is TIM1_CH1 */ +#define LL_GPDMA1_REQUEST_TIM1_CH2 8U /*!< GPDMA1 HW request is TIM1_CH2 */ +#define LL_GPDMA1_REQUEST_TIM1_CH3 9U /*!< GPDMA1 HW request is TIM1_CH3 */ +#define LL_GPDMA1_REQUEST_TIM1_CH4 10U /*!< GPDMA1 HW request is TIM1_CH4 */ +#define LL_GPDMA1_REQUEST_TIM1_UP 11U /*!< GPDMA1 HW request is TIM1_UP */ +#define LL_GPDMA1_REQUEST_TIM1_TRIG 12U /*!< GPDMA1 HW request is TIM1_TRIG */ +#define LL_GPDMA1_REQUEST_TIM1_COM 13U /*!< GPDMA1 HW request is TIM1_COM */ +#define LL_GPDMA1_REQUEST_TIM2_CH1 14U /*!< GPDMA1 HW request is TIM2_CH1 */ +#define LL_GPDMA1_REQUEST_TIM2_CH2 15U /*!< GPDMA1 HW request is TIM2_CH2 */ +#define LL_GPDMA1_REQUEST_TIM2_CH3 16U /*!< GPDMA1 HW request is TIM2_CH3 */ +#define LL_GPDMA1_REQUEST_TIM2_CH4 17U /*!< GPDMA1 HW request is TIM2_CH4 */ +#define LL_GPDMA1_REQUEST_TIM2_UP 18U /*!< GPDMA1 HW request is TIM2_UP */ +#define LL_GPDMA1_REQUEST_TIM2_TRIG 19U /*!< GPDMA1 HW request is TIM2_TRIG */ +#define LL_GPDMA1_REQUEST_TIM3_CH1 20U /*!< GPDMA1 HW request is TIM3_CH1 */ +#define LL_GPDMA1_REQUEST_TIM3_CH2 21U /*!< GPDMA1 HW request is TIM3_CH2 */ +#define LL_GPDMA1_REQUEST_TIM3_CH3 22U /*!< GPDMA1 HW request is TIM3_CH3 */ +#define LL_GPDMA1_REQUEST_TIM3_CH4 23U /*!< GPDMA1 HW request is TIM3_CH4 */ +#define LL_GPDMA1_REQUEST_TIM3_UP 24U /*!< GPDMA1 HW request is TIM3_UP */ +#define LL_GPDMA1_REQUEST_TIM3_TRIG 25U /*!< GPDMA1 HW request is TIM3_TRIG */ +#define LL_GPDMA1_REQUEST_TIM4_CH1 26U /*!< GPDMA1 HW request is TIM4_CH1 */ +#define LL_GPDMA1_REQUEST_TIM4_CH2 27U /*!< GPDMA1 HW request is TIM4_CH2 */ +#define LL_GPDMA1_REQUEST_TIM4_CH3 28U /*!< GPDMA1 HW request is TIM4_CH3 */ +#define LL_GPDMA1_REQUEST_TIM4_CH4 29U /*!< GPDMA1 HW request is TIM4_CH4 */ +#define LL_GPDMA1_REQUEST_TIM4_UP 30U /*!< GPDMA1 HW request is TIM4_UP */ +#define LL_GPDMA1_REQUEST_TIM4_TRIG 31U /*!< GPDMA1 HW request is TIM4_TRIG */ +#define LL_GPDMA1_REQUEST_TIM5_CH1 32U /*!< GPDMA1 HW request is TIM5_CH1 */ +#define LL_GPDMA1_REQUEST_TIM5_CH2 33U /*!< GPDMA1 HW request is TIM5_CH2 */ +#define LL_GPDMA1_REQUEST_TIM5_CH3 34U /*!< GPDMA1 HW request is TIM5_CH3 */ +#define LL_GPDMA1_REQUEST_TIM5_CH4 35U /*!< GPDMA1 HW request is TIM5_CH4 */ +#define LL_GPDMA1_REQUEST_TIM5_UP 36U /*!< GPDMA1 HW request is TIM5_UP */ +#define LL_GPDMA1_REQUEST_TIM5_TRIG 37U /*!< GPDMA1 HW request is TIM5_TRIG */ +#define LL_GPDMA1_REQUEST_TIM6_UP 38U /*!< GPDMA1 HW request is TIM6_UP */ +#define LL_GPDMA1_REQUEST_TIM7_UP 39U /*!< GPDMA1 HW request is TIM7_UP */ +#define LL_GPDMA1_REQUEST_TIM15_CH1 40U /*!< GPDMA1 HW request is TIM15_CH1 */ +#define LL_GPDMA1_REQUEST_TIM15_CH2 41U /*!< GPDMA1 HW request is TIM15_CH2 */ +#define LL_GPDMA1_REQUEST_TIM15_UP 42U /*!< GPDMA1 HW request is TIM15_UP */ +#define LL_GPDMA1_REQUEST_TIM15_TRIG 43U /*!< GPDMA1 HW request is TIM15_TRIG */ +#define LL_GPDMA1_REQUEST_TIM15_COM 44U /*!< GPDMA1 HW request is TIM15_COM */ +#define LL_GPDMA1_REQUEST_TIM16_CH1 45U /*!< GPDMA1 HW request is TIM16_CH1 */ +#define LL_GPDMA1_REQUEST_TIM16_UP 46U /*!< GPDMA1 HW request is TIM16_UP */ +#define LL_GPDMA1_REQUEST_TIM16_COM 47U /*!< GPDMA1 HW request is TIM16_COM */ +#define LL_GPDMA1_REQUEST_TIM17_CH1 48U /*!< GPDMA1 HW request is TIM17_CH1 */ +#define LL_GPDMA1_REQUEST_TIM17_UP 49U /*!< GPDMA1 HW request is TIM17_UP */ +#define LL_GPDMA1_REQUEST_TIM17_COM 50U /*!< GPDMA1 HW request is TIM17_COM */ +#define LL_GPDMA1_REQUEST_SPI1_RX 51U /*!< GPDMA1 HW request is SPI1_RX */ +#define LL_GPDMA1_REQUEST_SPI1_TX 52U /*!< GPDMA1 HW request is SPI1_TX */ +#define LL_GPDMA1_REQUEST_SPI2_RX 53U /*!< GPDMA1 HW request is SPI2_RX */ +#define LL_GPDMA1_REQUEST_SPI2_TX 54U /*!< GPDMA1 HW request is SPI2_TX */ +#define LL_GPDMA1_REQUEST_SPI3_RX 55U /*!< GPDMA1 HW request is SPI3_RX */ +#define LL_GPDMA1_REQUEST_SPI3_TX 56U /*!< GPDMA1 HW request is SPI3_TX */ +#define LL_GPDMA1_REQUEST_SPI4_RX 57U /*!< GPDMA1 HW request is SPI4_RX */ +#define LL_GPDMA1_REQUEST_SPI4_TX 58U /*!< GPDMA1 HW request is SPI4_TX */ +#define LL_GPDMA1_REQUEST_SPI5_RX 59U /*!< GPDMA1 HW request is SPI5_RX */ +#define LL_GPDMA1_REQUEST_SPI5_TX 60U /*!< GPDMA1 HW request is SPI5_TX */ +#define LL_GPDMA1_REQUEST_SPI6_RX 61U /*!< GPDMA1 HW request is SPI6_RX */ +#define LL_GPDMA1_REQUEST_SPI6_TX 62U /*!< GPDMA1 HW request is SPI6_TX */ +#define LL_GPDMA1_REQUEST_SAI1_A 63U /*!< GPDMA1 HW request is SAI1_A */ +#define LL_GPDMA1_REQUEST_SAI1_B 64U /*!< GPDMA1 HW request is SAI1_B */ +#define LL_GPDMA1_REQUEST_SAI2_A 65U /*!< GPDMA1 HW request is SAI2_A */ +#define LL_GPDMA1_REQUEST_SAI2_B 66U /*!< GPDMA1 HW request is SAI2_B */ +#define LL_GPDMA1_REQUEST_I2C1_RX 67U /*!< GPDMA1 HW request is I2C1_RX */ +#define LL_GPDMA1_REQUEST_I2C1_TX 68U /*!< GPDMA1 HW request is I2C1_TX */ +#define LL_GPDMA1_REQUEST_I2C2_RX 69U /*!< GPDMA1 HW request is I2C2_RX */ +#define LL_GPDMA1_REQUEST_I2C2_TX 70U /*!< GPDMA1 HW request is I2C2_TX */ +#define LL_GPDMA1_REQUEST_I2C3_RX 71U /*!< GPDMA1 HW request is I2C3_RX */ +#define LL_GPDMA1_REQUEST_I2C3_TX 72U /*!< GPDMA1 HW request is I2C3_TX */ +#define LL_GPDMA1_REQUEST_USART1_RX 73U /*!< GPDMA1 HW request is USART1_RX */ +#define LL_GPDMA1_REQUEST_USART1_TX 74U /*!< GPDMA1 HW request is USART1_TX */ +#define LL_GPDMA1_REQUEST_USART2_RX 75U /*!< GPDMA1 HW request is USART2_RX */ +#define LL_GPDMA1_REQUEST_USART2_TX 76U /*!< GPDMA1 HW request is USART2_TX */ +#define LL_GPDMA1_REQUEST_USART3_RX 77U /*!< GPDMA1 HW request is USART3_RX */ +#define LL_GPDMA1_REQUEST_USART3_TX 78U /*!< GPDMA1 HW request is USART3_TX */ +#define LL_GPDMA1_REQUEST_UART4_RX 79U /*!< GPDMA1 HW request is UART4_RX */ +#define LL_GPDMA1_REQUEST_UART4_TX 80U /*!< GPDMA1 HW request is UART4_TX */ +#define LL_GPDMA1_REQUEST_UART5_RX 81U /*!< GPDMA1 HW request is UART5_RX */ +#define LL_GPDMA1_REQUEST_UART5_TX 82U /*!< GPDMA1 HW request is UART5_TX */ +#define LL_GPDMA1_REQUEST_UART7_RX 83U /*!< GPDMA1 HW request is UART7_RX */ +#define LL_GPDMA1_REQUEST_UART7_TX 84U /*!< GPDMA1 HW request is UART7_TX */ +#define LL_GPDMA1_REQUEST_UART8_RX 85U /*!< GPDMA1 HW request is UART8_RX */ +#define LL_GPDMA1_REQUEST_UART8_TX 86U /*!< GPDMA1 HW request is UART8_TX */ +#define LL_GPDMA1_REQUEST_CORDIC_READ 87U /*!< GPDMA1 HW request is CORDIC_READ */ +#define LL_GPDMA1_REQUEST_CORDIC_WRITE 88U /*!< GPDMA1 HW request is CORDIC_WRITE */ +#define LL_GPDMA1_REQUEST_LPTIM1_IC1 89U /*!< GPDMA1 HW request is LPTIM1_IC1 */ +#define LL_GPDMA1_REQUEST_LPTIM1_IC2 90U /*!< GPDMA1 HW request is LPTIM1_IC2 */ +#define LL_GPDMA1_REQUEST_LPTIM1_UE 91U /*!< GPDMA1 HW request is LPTIM1_UE */ +#define LL_GPDMA1_REQUEST_LPTIM2_IC1 92U /*!< GPDMA1 HW request is LPTIM2_IC1 */ +#define LL_GPDMA1_REQUEST_LPTIM2_IC2 93U /*!< GPDMA1 HW request is LPTIM2_IC2 */ +#define LL_GPDMA1_REQUEST_LPTIM2_UE 94U /*!< GPDMA1 HW request is LPTIM2_UE */ +#define LL_GPDMA1_REQUEST_SPDIF_RX_DT 95U /*!< GPDMA1 HW request is SPDIF_RX_DT */ +#define LL_GPDMA1_REQUEST_SPDIF_RX_CS 96U /*!< GPDMA1 HW request is SPDIF_RX_CS */ +#define LL_GPDMA1_REQUEST_ADF1_FLT0 97U /*!< GPDMA1 HW request is ADF1_FLT0 */ +#define LL_GPDMA1_REQUEST_UCPD1_TX 98U /*!< GPDMA1 HW request is UCPD1_TX */ +#define LL_GPDMA1_REQUEST_UCPD1_RX 99U /*!< GPDMA1 HW request is USBPD_RX */ +#define LL_GPDMA1_REQUEST_PSSI 100U /*!< GPDMA1 HW request is PSSI */ +#define LL_GPDMA1_REQUEST_LPUART1_RX 101U /*!< GPDMA1 HW request is LPUART1_RX */ +#define LL_GPDMA1_REQUEST_LPUART1_TX 102U /*!< GPDMA1 HW request is LPUART1_TX */ +#define LL_GPDMA1_REQUEST_LPTIM3_IC1 103U /*!< GPDMA1 HW request is LPTIM3_IC1 */ +#define LL_GPDMA1_REQUEST_LPTIM3_IC2 104U /*!< GPDMA1 HW request is LPTIM3_IC2 */ +#define LL_GPDMA1_REQUEST_LPTIM3_UE 105U /*!< GPDMA1 HW request is LPTIM3_UE */ +#define LL_GPDMA1_REQUEST_I3C1_RX 106U /*!< GPDMA1 HW request is I3C1_RX */ +#define LL_GPDMA1_REQUEST_I3C1_TX 107U /*!< GPDMA1 HW request is I3C1_TX */ +#define LL_GPDMA1_REQUEST_I3C1_TC 108U /*!< GPDMA1 HW request is I3C1_TC */ +#define LL_GPDMA1_REQUEST_I3C1_RS 109U /*!< GPDMA1 HW request is I3C1_RS */ + +/** + * @} + */ + +/** @defgroup DMA_LL_EC_TRIGGER_SELECTION Trigger Selection + * @{ + */ +/* HPDMA1 triggers */ +#define LL_HPDMA1_TRIGGER_DCMIPP_EVT_FRAMEEND 0U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_FRAMEEND */ +#define LL_HPDMA1_TRIGGER_DCMIPP_EVT_HSYNC 1U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_HSYNC */ +#define LL_HPDMA1_TRIGGER_DCMIPP_EVT_LINEEND 2U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_LINEEND */ +#define LL_HPDMA1_TRIGGER_DCMIPP_EVT_VSYNC 3U /*!< HPDMA1 HW Trigger signal is DCMIPP_EVT_VSYNC */ +#define LL_HPDMA1_TRIGGER_DMA2D_CTC_FLAG 4U /*!< HPDMA1 HW Trigger signal is DMA2D_CTC_FLAG */ +#define LL_HPDMA1_TRIGGER_DMA2D_TC_FLAG 5U /*!< HPDMA1 HW Trigger signal is DMA2D_TC_FLAG */ +#define LL_HPDMA1_TRIGGER_DMA2D_TW_FLAG 6U /*!< HPDMA1 HW Trigger signal is DMA2D_TW_FLAG */ +#define LL_HPDMA1_TRIGGER_JPEG_EOC_FLAG 7U /*!< HPDMA1 HW Trigger signal is JPEG_EOC_FLAG */ +#define LL_HPDMA1_TRIGGER_JPEG_IFNF_FLAG 8U /*!< HPDMA1 HW Trigger signal is JPEG_IFNF_FLAG */ +#define LL_HPDMA1_TRIGGER_JPEG_IFT_FLAG 9U /*!< HPDMA1 HW Trigger signal is JPEG_IFT_FLAG */ +#define LL_HPDMA1_TRIGGER_JPEG_OFNE_FLAG 10U /*!< HPDMA1 HW Trigger signal is JPEG_OFNE_FLAG */ +#define LL_HPDMA1_TRIGGER_JPEG_OFT_FLAG 11U /*!< HPDMA1 HW Trigger signal is JPEG_OFT_FLAG */ +#define LL_HPDMA1_TRIGGER_LCD 12U /*!< HPDMA1 HW Trigger signal is LCD */ +#define LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG0 13U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG0 */ +#define LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG1 14U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG1 */ +#define LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG2 15U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG2 */ +#define LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG3 16U /*!< HPDMA1 HW Trigger signal is GPU2D1_GP_FLAG3 */ +#define LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_4 17U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_4 */ +#define LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_3 18U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_3 */ +#define LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_2 19U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_2 */ +#define LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_1 20U /*!< HPDMA1 HW Trigger signal is GFXTIM_0_EVT_1 */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH0_TCF 21U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH0_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH1_TCF 22U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH2_TCF 23U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH2_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH3_TCF 24U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH3_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH4_TCF 25U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH4_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH5_TCF 26U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH5_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH6_TCF 27U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH6_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH7_TCF 28U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH7_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH8_TCF 29U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH8_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH9_TCF 30U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH9_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH10_TCF 31U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH10_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH11_TCF 32U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH11_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH12_TCF 33U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH12_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH13_TCF 34U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH13_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH14_TCF 35U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH14_TCF */ +#define LL_HPDMA1_TRIGGER_GPDMA1_CH15_TCF 36U /*!< HPDMA1 HW Trigger signal is GPDMA1_CH15_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH0_TCF 37U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH0_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH1_TCF 38U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH1_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH2_TCF 39U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH2_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH3_TCF 40U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH3_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH4_TCF 41U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH4_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH5_TCF 42U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH5_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH6_TCF 43U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH6_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH7_TCF 44U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH7_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH8_TCF 45U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH8_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH9_TCF 46U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH9_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH10_TCF 47U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH10_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH11_TCF 48U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH11_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH12_TCF 49U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH12_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH13_TCF 50U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH13_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH14_TCF 51U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH14_TCF */ +#define LL_HPDMA1_TRIGGER_HPDMA1_CH15_TCF 52U /*!< HPDMA1 HW Trigger signal is HPDMA1_CH15_TCF */ + +/* GPDMA1 triggers */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH0_TCF 0U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH0_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH1_TCF 1U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH1_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH2_TCF 2U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH2_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH3_TCF 3U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH3_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH4_TCF 4U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH4_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH5_TCF 5U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH5_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH6_TCF 6U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH6_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH7_TCF 7U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH7_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH8_TCF 8U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH8_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH9_TCF 9U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH9_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH10_TCF 10U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH10_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH11_TCF 11U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH11_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH12_TCF 12U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH12_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH13_TCF 13U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH13_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH14_TCF 14U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH14_TCF */ +#define LL_GPDMA1_TRIGGER_HPDMA1_CH15_TCF 15U /*!< GPDMA1 HW Trigger signal is HPDMA1_CH15_TCF */ +#define LL_GPDMA1_TRIGGER_LPTIM1_CH1 16U /*!< GPDMA1 HW Trigger signal is LPTIM1_CH1 */ +#define LL_GPDMA1_TRIGGER_LPTIM1_CH2 17U /*!< GPDMA1 HW Trigger signal is LPTIM1_CH2 */ +#define LL_GPDMA1_TRIGGER_LPTIM2_CH1 18U /*!< GPDMA1 HW Trigger signal is LPTIM2_CH1 */ +#define LL_GPDMA1_TRIGGER_LPTIM2_CH2 19U /*!< GPDMA1 HW Trigger signal is LPTIM2_CH2 */ +#define LL_GPDMA1_TRIGGER_LPTIM3_CH1 20U /*!< GPDMA1 HW Trigger signal is LPTIM3_CH1 */ +#define LL_GPDMA1_TRIGGER_LPTIM3_CH2 21U /*!< GPDMA1 HW Trigger signal is LPTIM3_CH2 */ +#define LL_GPDMA1_TRIGGER_LPTIM4_OUT 22U /*!< GPDMA1 HW Trigger signal is LPTIM4_OUT */ +#define LL_GPDMA1_TRIGGER_LPTIM5_OUT 23U /*!< GPDMA1 HW Trigger signal is LPTIM5_OUT */ +#define LL_GPDMA1_TRIGGER_EXTIT0_SYNC 24U /*!< GPDMA1 HW Trigger signal is EXTIT0_SYNC */ +#define LL_GPDMA1_TRIGGER_RTC_WKUP 25U /*!< GPDMA1 HW Trigger signal is RTC_WKUP */ +#define LL_GPDMA1_TRIGGER_LPUART1_IT_R_WUP_ASYNC 26U /*!< GPDMA1 HW Trigger signal is R_WUP_ASYNC */ +#define LL_GPDMA1_TRIGGER_LPUART1_IT_T_WUP_ASYNC 27U /*!< GPDMA1 HW Trigger signal is T_WUP_ASYNC */ +#define LL_GPDMA1_TRIGGER_SPI6_IT_OR_SPI6_AIT_SYNC 28U /*!< GPDMA1 HW Trigger signal is SPI6_OR_SPI6_AIT_SYNC */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH0_TCF 29U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH1_TCF 30U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH1_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH2_TCF 31U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH2_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH3_TCF 32U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH3_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH4_TCF 33U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH4_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH5_TCF 34U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH5_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH6_TCF 35U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH6_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH7_TCF 36U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH7_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH8_TCF 37U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH8_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH9_TCF 38U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH9_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH10_TCF 39U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH10_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH11_TCF 40U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH11_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH12_TCF 41U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH12_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH13_TCF 42U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH13_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH14_TCF 43U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH14_TCF */ +#define LL_GPDMA1_TRIGGER_GPDMA1_CH15_TCF 44U /*!< GPDMA1 HW Trigger signal is GPDMA1_CH15_TCF */ +#define LL_GPDMA1_TRIGGER_TIM1_TRGO 45U /*!< GPDMA1 HW Trigger signal is TIM1_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM1_TRGO2 46U /*!< GPDMA1 HW Trigger signal is TIM1_TRGO2 */ +#define LL_GPDMA1_TRIGGER_TIM2_TRGO 47U /*!< GPDMA1 HW Trigger signal is TIM2_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM3_TRGO 48U /*!< GPDMA1 HW Trigger signal is TIM3_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM4_TRGO 49U /*!< GPDMA1 HW Trigger signal is TIM4_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM5_TRGO 50U /*!< GPDMA1 HW Trigger signal is TIM5_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM6_TRGO 51U /*!< GPDMA1 HW Trigger signal is TIM6_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM7_TRGO 52U /*!< GPDMA1 HW Trigger signal is TIM7_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM9_TRGO 53U /*!< GPDMA1 HW Trigger signal is TIM9_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM12_TRGO 54U /*!< GPDMA1 HW Trigger signal is TIM12_TRGO */ +#define LL_GPDMA1_TRIGGER_TIM15_TRGO 55U /*!< GPDMA1 HW Trigger signal is TIM15_TRGO */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_COMMON_WRITE_READ_REGISTERS Common Write and Read Registers macros + * @{ + */ +/** + * @brief Write a value in DMA register. + * @param __INSTANCE__ DMA Instance. + * @param __REG__ Register to be written. + * @param __VALUE__ Value to be written in the register. + * @retval None. + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register. + * @param __INSTANCE__ DMA Instance. + * @param __REG__ Register to be read. + * @retval Register value. + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx. + * @param __CHANNEL_INSTANCE__ DMAx_Channely. + * @retval DMAx. + */ +#define LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)GPDMA1_Channel15)) ? HPDMA1 : GPDMA1) + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y. + * @param __CHANNEL_INSTANCE__ DMAx_Channely. + * @retval LL_DMA_CHANNEL_y. + */ +#define LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel0)) ? LL_DMA_CHANNEL_0 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel0)) ? LL_DMA_CHANNEL_0 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel7)) ? LL_DMA_CHANNEL_7 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel7)) ? LL_DMA_CHANNEL_7 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel8)) ? LL_DMA_CHANNEL_8 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel8)) ? LL_DMA_CHANNEL_8 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel9)) ? LL_DMA_CHANNEL_9 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel9)) ? LL_DMA_CHANNEL_9 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel10)) ? LL_DMA_CHANNEL_10 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel10)) ? LL_DMA_CHANNEL_10 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel11)) ? LL_DMA_CHANNEL_11 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel11)) ? LL_DMA_CHANNEL_11 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel12)) ? LL_DMA_CHANNEL_12 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel12)) ? LL_DMA_CHANNEL_12 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel13)) ? LL_DMA_CHANNEL_13 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel13)) ? LL_DMA_CHANNEL_13 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)HPDMA1_Channel14)) ? LL_DMA_CHANNEL_14 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)GPDMA1_Channel14)) ? LL_DMA_CHANNEL_14 : \ + LL_DMA_CHANNEL_15) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely. + * @param __DMA_INSTANCE__ DMAx. + * @param __CHANNEL__ LL_DMA_CHANNEL_y. + * @retval DMAx_Channely. + */ +#define LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_0))) \ + ? HPDMA1_Channel0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_0))) \ + ? GPDMA1_Channel0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) \ + ? HPDMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) \ + ? GPDMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) \ + ? HPDMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) \ + ? GPDMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) \ + ? HPDMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) \ + ? GPDMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) \ + ? HPDMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) \ + ? GPDMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) \ + ? HPDMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) \ + ? GPDMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) \ + ? HPDMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) \ + ? GPDMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) \ + ? HPDMA1_Channel7 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) \ + ? GPDMA1_Channel7 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_8))) \ + ? HPDMA1_Channel8 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_8))) \ + ? GPDMA1_Channel8 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_9))) \ + ? HPDMA1_Channel9 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_9))) \ + ? GPDMA1_Channel9 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_10)))\ + ? HPDMA1_Channel10 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_10)))\ + ? GPDMA1_Channel10 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_11)))\ + ? HPDMA1_Channel11 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_11)))\ + ? GPDMA1_Channel11 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_12)))\ + ? HPDMA1_Channel12 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_12)))\ + ? GPDMA1_Channel12 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_13)))\ + ? HPDMA1_Channel13 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_13)))\ + ? GPDMA1_Channel13 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_14)))\ + ? HPDMA1_Channel14 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)GPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_14)))\ + ? GPDMA1_Channel14 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)HPDMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_15)))\ + ? HPDMA1_Channel15 : GPDMA1_Channel15) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable channel. + * @note This API is used for all available DMA channels. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance. + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable channel. + * @note This API is used for all available DMA channels. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance. + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, + (DMA_CCR_SUSP | DMA_CCR_RESET)); +} + +/** + * @brief Check if channel is enabled or disabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN) + == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Reset channel. + * @note This API is used for all available DMA channels. + * @rmtoll CCR RESET LL_DMA_ResetChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ResetChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_RESET); +} + +/** + * @brief Suspend channel. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSP LL_DMA_SuspendChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SuspendChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSP); +} + +/** + * @brief Resume channel. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSP LL_DMA_ResumeChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ResumeChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSP); +} + +/** + * @brief Check if channel is suspended. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSP LL_DMA_IsSuspendedChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsSuspendedChannel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSP) + == (DMA_CCR_SUSP)) ? 1UL : 0UL); +} + +/** + * @brief Set linked-list base address. + * @note This API is used for all available DMA channels. + * @rmtoll CLBAR LBA LL_DMA_SetLinkedListBaseAddr + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param LinkedListBaseAddr Between 0 to 0xFFFF0000 (where the 4 LSB bytes + * are always 0) + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetLinkedListBaseAddr(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t LinkedListBaseAddr) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLBAR, DMA_CLBAR_LBA, + (LinkedListBaseAddr & DMA_CLBAR_LBA)); +} + +/** + * @brief Get linked-list base address. + * @note This API is used for all available DMA channels. + * @rmtoll CLBAR LBA LL_DMA_GetLinkedListBaseAddr + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Value between 0 to 0xFFFF0000 (where the 4 LSB bytes are always 0) + */ +__STATIC_INLINE uint32_t LL_DMA_GetLinkedListBaseAddr(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLBAR, DMA_CLBAR_LBA)); +} + +/** + * @brief Configure all parameters linked to channel control. + * @note This API is used for all available DMA channels. + * @rmtoll CCR PRIO LL_DMA_ConfigControl\n + * CCR LAP LL_DMA_ConfigControl\n + * CCR LSM LL_DMA_ConfigControl + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_LOW_PRIORITY_LOW_WEIGHT or @ref LL_DMA_LOW_PRIORITY_MID_WEIGHT or + * @ref LL_DMA_LOW_PRIORITY_HIGH_WEIGHT or @ref LL_DMA_HIGH_PRIORITY + * @arg @ref LL_DMA_LINK_ALLOCATED_PORT0 or @ref LL_DMA_LINK_ALLOCATED_PORT1 + * @arg @ref LL_DMA_LSM_FULL_EXECUTION or @ref LL_DMA_LSM_1LINK_EXECUTION + *@retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigControl(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, + (DMA_CCR_PRIO | DMA_CCR_LAP | DMA_CCR_LSM), Configuration); +} + +/** + * @brief Set priority level. + * @note This API is used for all available DMA channels. + * @rmtoll CCR PRIO LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_LOW_PRIORITY_LOW_WEIGHT + * @arg @ref LL_DMA_LOW_PRIORITY_MID_WEIGHT + * @arg @ref LL_DMA_LOW_PRIORITY_HIGH_WEIGHT + * @arg @ref LL_DMA_HIGH_PRIORITY + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PRIO, Priority); +} + +/** + * @brief Get Channel priority level. + * @note This API is used for all available DMA channels. + * @rmtoll CCR PRIO LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_LOW_PRIORITY_LOW_WEIGHT + * @arg @ref LL_DMA_LOW_PRIORITY_MID_WEIGHT + * @arg @ref LL_DMA_LOW_PRIORITY_HIGH_WEIGHT + * @arg @ref LL_DMA_HIGH_PRIORITY + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PRIO)); +} + +/** + * @brief Set linked-list allocated port. + * @rmtoll CCR LAP LL_DMA_SetLinkAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param LinkAllocatedPort This parameter can be one of the following values: + * @arg @ref LL_DMA_LINK_ALLOCATED_PORT0 + * @arg @ref LL_DMA_LINK_ALLOCATED_PORT1 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetLinkAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t LinkAllocatedPort) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_LAP, LinkAllocatedPort); +} + +/** + * @brief Get linked-list allocated port. + * @rmtoll CCR LAP LL_DMA_GetLinkAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_LINK_ALLOCATED_PORT0 + * @arg @ref LL_DMA_LINK_ALLOCATED_PORT1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetLinkAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_LAP)); +} + +/** + * @brief Set link step mode. + * @note This API is used for all available DMA channels. + * @rmtoll CCR LSM LL_DMA_SetLinkStepMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param LinkStepMode This parameter can be one of the following values: + * @arg @ref LL_DMA_LSM_FULL_EXECUTION + * @arg @ref LL_DMA_LSM_1LINK_EXECUTION + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetLinkStepMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t LinkStepMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_LSM, LinkStepMode); +} + +/** + * @brief Get Link step mode. + * @note This API is used for all available DMA channels. + * @rmtoll CCR LSM LL_DMA_GetLinkStepMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_LSM_FULL_EXECUTION + * @arg @ref LL_DMA_LSM_1LINK_EXECUTION + */ +__STATIC_INLINE uint32_t LL_DMA_GetLinkStepMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_LSM)); +} + +/** + * @brief Configure data transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 DAP LL_DMA_ConfigTransfer\n + * CTR1 DWX LL_DMA_ConfigTransfer\n + * CTR1 DHX LL_DMA_ConfigTransfer\n + * CTR1 DBX LL_DMA_ConfigTransfer\n + * CTR1 DINC LL_DMA_ConfigTransfer\n + * CTR1 SAP LL_DMA_ConfigTransfer\n + * CTR1 SBX LL_DMA_ConfigTransfer\n + * CTR1 PAM LL_DMA_ConfigTransfer\n + * CTR1 SINC LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DEST_ALLOCATED_PORT0 or @ref LL_DMA_DEST_ALLOCATED_PORT1 + * @arg @ref LL_DMA_DEST_WORD_PRESERVE or @ref LL_DMA_DEST_WORD_EXCHANGE + * @arg @ref LL_DMA_DEST_HALFWORD_PRESERVE or @ref LL_DMA_DEST_HALFWORD_EXCHANGE + * @arg @ref LL_DMA_DEST_BYTE_PRESERVE or @ref LL_DMA_DEST_BYTE_EXCHANGE + * @arg @ref LL_DMA_SRC_BYTE_PRESERVE or @ref LL_DMA_SRC_BYTE_EXCHANGE + * @arg @ref LL_DMA_DEST_FIXED or @ref LL_DMA_DEST_INCREMENT + * @arg @ref LL_DMA_DEST_DATAWIDTH_BYTE or @ref LL_DMA_DEST_DATAWIDTH_HALFWORD or + * @ref LL_DMA_DEST_DATAWIDTH_WORD or @ref LL_DMA_DEST_DATAWIDTH_DOUBLEWORD + * @arg @ref LL_DMA_SRC_ALLOCATED_PORT0 or @ref LL_DMA_SRC_ALLOCATED_PORT1 + * @arg @ref LL_DMA_DATA_ALIGN_ZEROPADD or @ref LL_DMA_DATA_ALIGN_SIGNEXTPADD or + * @ref LL_DMA_DATA_PACK_UNPACK + * @arg @ref LL_DMA_SRC_FIXED or @ref LL_DMA_SRC_INCREMENT + * @arg @ref LL_DMA_SRC_DATAWIDTH_BYTE or @ref LL_DMA_SRC_DATAWIDTH_HALFWORD or + * @ref LL_DMA_SRC_DATAWIDTH_WORD or @ref LL_DMA_SRC_DATAWIDTH_DOUBLEWORD + *@retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, + DMA_CTR1_DAP | DMA_CTR1_DWX | DMA_CTR1_DHX | DMA_CTR1_DBX | DMA_CTR1_SBX | DMA_CTR1_DINC | \ + DMA_CTR1_SINC | DMA_CTR1_SAP | DMA_CTR1_PAM | DMA_CTR1_DDW_LOG2 | DMA_CTR1_SDW_LOG2, Configuration); +} + +/** + * @brief Configure source and destination burst length. + * @rmtoll CTR1 DBL_1 LL_DMA_SetDestBurstLength\n + * @rmtoll CTR1 SBL_1 LL_DMA_SetDestBurstLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcBurstLength Between 1 to 64 + * @param DestBurstLength Between 1 to 64 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigBurstLength(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcBurstLength, + uint32_t DestBurstLength) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, + (DMA_CTR1_SBL_1 | DMA_CTR1_DBL_1), (((SrcBurstLength - 1U) << DMA_CTR1_SBL_1_Pos) & DMA_CTR1_SBL_1) | \ + (((DestBurstLength - 1U) << DMA_CTR1_DBL_1_Pos) & DMA_CTR1_DBL_1)); +} + +/** + * @brief Set destination allocated port. + * @rmtoll CTR1 DAP LL_DMA_SetDestAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestAllocatedPort This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_ALLOCATED_PORT0 + * @arg @ref LL_DMA_DEST_ALLOCATED_PORT1 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestAllocatedPort) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DAP, + DestAllocatedPort); +} + +/** + * @brief Get destination allocated port. + * @rmtoll CTR1 DAP LL_DMA_GetDestAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_ALLOCATED_PORT0 + * @arg @ref LL_DMA_DEST_ALLOCATED_PORT1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DAP)); +} + +/** + * @brief Set destination word exchange. + * @rmtoll CTR1 DWX LL_DMA_SetDestWordExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestWordExchange This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_WORD_PRESERVE + * @arg @ref LL_DMA_DEST_WORD_EXCHANGE + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestWordExchange(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestWordExchange) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DWX, + DestWordExchange); +} + +/** + * @brief Get destination word exchange. + * @rmtoll CTR1 DWX LL_DMA_GetDestWordExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_WORD_PRESERVE + * @arg @ref LL_DMA_DEST_WORD_EXCHANGE + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestWordExchange(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DWX)); +} + +/** + * @brief Set destination half-word exchange. + * @rmtoll CTR1 DHX LL_DMA_SetDestHWordExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestHWordExchange This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_HALFWORD_PRESERVE + * @arg @ref LL_DMA_DEST_HALFWORD_EXCHANGE + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestHWordExchange(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestHWordExchange) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DHX, + DestHWordExchange); +} + +/** + * @brief Get destination half-word exchange. + * @rmtoll CTR1 DHX LL_DMA_GetDestHWordExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_HALFWORD_PRESERVE + * @arg @ref LL_DMA_DEST_HALFWORD_EXCHANGE + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestHWordExchange(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DHX)); +} + +/** + * @brief Set destination byte exchange. + * @rmtoll CTR1 DBX LL_DMA_SetDestByteExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestByteExchange This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_BYTE_PRESERVE + * @arg @ref LL_DMA_DEST_BYTE_EXCHANGE + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestByteExchange(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestByteExchange) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DBX, + DestByteExchange); +} + +/** + * @brief Get destination byte exchange. + * @rmtoll CTR1 DBX LL_DMA_GetDestByteExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_BYTE_PRESERVE + * @arg @ref LL_DMA_DEST_BYTE_EXCHANGE + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestByteExchange(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DBX)); +} + +/** + * @brief Set source byte exchange. + * @rmtoll CTR1 SBX LL_DMA_SetSrcByteExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcByteExchange This parameter can be one of the following values: + * @arg @ref LL_DMA_SRC_BYTE_PRESERVE + * @arg @ref LL_DMA_SRC_BYTE_EXCHANGE + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcByteExchange(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcByteExchange) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SBX, + SrcByteExchange); +} + +/** + * @brief Get source byte exchange. + * @rmtoll CTR1 SBX LL_DMA_GetSrcByteExchange + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_SRC_BYTE_PRESERVE + * @arg @ref LL_DMA_SRC_BYTE_EXCHANGE + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcByteExchange(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SBX)); +} + +/** + * @brief Set destination burst length. + * @rmtoll CTR1 DBL_1 LL_DMA_SetDestBurstLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestBurstLength Between 1 to 64 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestBurstLength(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestBurstLength) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DBL_1, + ((DestBurstLength - 1U) << DMA_CTR1_DBL_1_Pos) & DMA_CTR1_DBL_1); +} + +/** + * @brief Get destination burst length. + * @rmtoll CTR1 DBL_1 LL_DMA_GetDestBurstLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 1 to 64. + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestBurstLength(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, + DMA_CTR1_DBL_1) >> DMA_CTR1_DBL_1_Pos) + 1U); +} + +/** + * @brief Set destination increment mode. + * @rmtoll CTR1 DINC LL_DMA_SetDestIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestInc This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_FIXED + * @arg @ref LL_DMA_DEST_INCREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestIncMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestInc) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DINC, DestInc); +} + +/** + * @brief Get destination increment mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 DINC LL_DMA_GetDestIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_FIXED + * @arg @ref LL_DMA_DEST_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestIncMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DINC)); +} + +/** + * @brief Set destination data width. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 DDW_LOG2 LL_DMA_SetDestDataWidth + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestDataWidth This parameter can be one of the following values: + * @arg @ref LL_DMA_DEST_DATAWIDTH_BYTE + * @arg @ref LL_DMA_DEST_DATAWIDTH_HALFWORD + * @arg @ref LL_DMA_DEST_DATAWIDTH_WORD + * @arg @ref LL_DMA_DEST_DATAWIDTH_DOUBLEWORD + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestDataWidth(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestDataWidth) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DDW_LOG2, + DestDataWidth); +} + +/** + * @brief Get destination data width. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 DDW_LOG2 LL_DMA_GetDestDataWidth + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DEST_DATAWIDTH_BYTE + * @arg @ref LL_DMA_DEST_DATAWIDTH_HALFWORD + * @arg @ref LL_DMA_DEST_DATAWIDTH_WORD + * @arg @ref LL_DMA_DEST_DATAWIDTH_DOUBLEWORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestDataWidth(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_DDW_LOG2)); +} + +/** + * @brief Set source allocated port. + * @rmtoll CTR1 SAP LL_DMA_SetSrcAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcAllocatedPort This parameter can be one of the following values: + * @arg @ref LL_DMA_SRC_ALLOCATED_PORT0 + * @arg @ref LL_DMA_SRC_ALLOCATED_PORT1 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAllocatedPort) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SAP, + SrcAllocatedPort); +} + +/** + * @brief Get source allocated port. + * @rmtoll CTR1 SAP LL_DMA_GetSrcAllocatedPort + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_SRC_ALLOCATED_PORT0 + * @arg @ref LL_DMA_SRC_ALLOCATED_PORT1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcAllocatedPort(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SAP)); +} + +/** + * @brief Set data alignment mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 PAM LL_DMA_SetDataAlignment + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_DMA_DATA_ALIGN_ZEROPADD + * @arg @ref LL_DMA_DATA_ALIGN_SIGNEXTPADD + * @arg @ref LL_DMA_DATA_PACK_UNPACK + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDataAlignment(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DataAlignment) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_PAM, + DataAlignment); +} + +/** + * @brief Get data alignment mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 PAM LL_DMA_GetDataAlignment + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DATA_ALIGN_ZEROPADD + * @arg @ref LL_DMA_DATA_ALIGN_SIGNEXTPADD + * @arg @ref LL_DMA_DATA_PACK_UNPACK + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataAlignment(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_PAM)); +} + +/** + * @brief Set source burst length. + * @rmtoll CTR1 SBL_1 LL_DMA_SetSrcBurstLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcBurstLength Between 1 to 64 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcBurstLength(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcBurstLength) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SBL_1, + ((SrcBurstLength - 1U) << DMA_CTR1_SBL_1_Pos) & DMA_CTR1_SBL_1); +} + +/** + * @brief Get source burst length. + * @rmtoll CTR1 SBL_1 LL_DMA_GetSrcBurstLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 1 to 64 + * @retval None. + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcBurstLength(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, + DMA_CTR1_SBL_1) >> DMA_CTR1_SBL_1_Pos) + 1U); +} + +/** + * @brief Set source increment mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 SINC LL_DMA_SetSrcIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcInc This parameter can be one of the following values: + * @arg @ref LL_DMA_SRC_FIXED + * @arg @ref LL_DMA_SRC_INCREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcIncMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcInc) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SINC, SrcInc); +} + +/** + * @brief Get source increment mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 SINC LL_DMA_GetSrcIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_SRC_FIXED + * @arg @ref LL_DMA_SRC_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcIncMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SINC)); +} + +/** + * @brief Set source data width. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 SDW_LOG2 LL_DMA_SetSrcDataWidth + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcDataWidth This parameter can be one of the following values: + * @arg @ref LL_DMA_SRC_DATAWIDTH_BYTE + * @arg @ref LL_DMA_SRC_DATAWIDTH_HALFWORD + * @arg @ref LL_DMA_SRC_DATAWIDTH_WORD + * @arg @ref LL_DMA_SRC_DATAWIDTH_DOUBLEWORD + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcDataWidth(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcDataWidth) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SDW_LOG2, + SrcDataWidth); +} + +/** + * @brief Get Source Data width. + * @note This API is used for all available DMA channels. + * @rmtoll CTR1 SDW_LOG2 LL_DMA_GetSrcDataWidth + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_SRC_DATAWIDTH_BYTE + * @arg @ref LL_DMA_SRC_DATAWIDTH_HALFWORD + * @arg @ref LL_DMA_SRC_DATAWIDTH_WORD + * @arg @ref LL_DMA_SRC_DATAWIDTH_DOUBLEWORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcDataWidth(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR1, DMA_CTR1_SDW_LOG2)); +} + +/** + * @brief Configure channel transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TCEM LL_DMA_ConfigChannelTransfer\n + * CTR2 TRIGPOL LL_DMA_ConfigChannelTransfer\n + * CTR2 TRIGM LL_DMA_ConfigChannelTransfer\n + * CTR2 BREQ LL_DMA_ConfigChannelTransfer\n + * CTR2 DREQ LL_DMA_ConfigChannelTransfer\n + * CTR2 SWREQ LL_DMA_ConfigChannelTransfer\n + * CTR2 PFREQ LL_DMA_ConfigChannelTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_TCEM_BLK_TRANSFER or @ref LL_DMA_TCEM_RPT_BLK_TRANSFER or + * @ref LL_DMA_TCEM_EACH_LLITEM_TRANSFER or @ref LL_DMA_TCEM_LAST_LLITEM_TRANSFER + * @arg @ref LL_DMA_HWREQUEST_SINGLEBURST or @ref LL_DMA_HWREQUEST_BLK + * @arg @ref LL_DMA_TRIG_POLARITY_MASKED or @ref LL_DMA_TRIG_POLARITY_RISING or + * @ref LL_DMA_TRIG_POLARITY_FALLING + * @arg @ref LL_DMA_TRIGM_BLK_TRANSFER or @ref LL_DMA_TRIGM_RPT_BLK_TRANSFER or + * @ref LL_DMA_TRIGM_LLI_LINK_TRANSFER or @ref LL_DMA_TRIGM_SINGLBURST_TRANSFER + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or + * @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_NORMAL or @ref LL_DMA_PFCTRL + *@retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigChannelTransfer(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, + (DMA_CTR2_TCEM | DMA_CTR2_TRIGPOL | DMA_CTR2_TRIGM | DMA_CTR2_DREQ | DMA_CTR2_SWREQ | DMA_CTR2_BREQ | + DMA_CTR2_PFREQ), Configuration); +} + +/** + * @brief Set transfer event mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TCEM LL_DMA_SetTransferEventMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param TransferEventMode This parameter can be one of the following values: + * @arg @ref LL_DMA_TCEM_BLK_TRANSFER + * @arg @ref LL_DMA_TCEM_RPT_BLK_TRANSFER + * @arg @ref LL_DMA_TCEM_EACH_LLITEM_TRANSFER + * @arg @ref LL_DMA_TCEM_LAST_LLITEM_TRANSFER + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetTransferEventMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t TransferEventMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TCEM, + TransferEventMode); +} + +/** + * @brief Get transfer event mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TCEM LL_DMA_GetTransferEventMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_TCEM_BLK_TRANSFER + * @arg @ref LL_DMA_TCEM_RPT_BLK_TRANSFER + * @arg @ref LL_DMA_TCEM_EACH_LLITEM_TRANSFER + * @arg @ref LL_DMA_TCEM_LAST_LLITEM_TRANSFER + */ +__STATIC_INLINE uint32_t LL_DMA_GetTransferEventMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TCEM)); +} + +/** + * @brief Set trigger polarity. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGPOL LL_DMA_SetTriggerPolarity + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param TriggerPolarity This parameter can be one of the following values: + * @arg @ref LL_DMA_TRIG_POLARITY_MASKED + * @arg @ref LL_DMA_TRIG_POLARITY_RISING + * @arg @ref LL_DMA_TRIG_POLARITY_FALLING + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetTriggerPolarity(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t TriggerPolarity) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TRIGPOL, + TriggerPolarity); +} + +/** + * @brief Get trigger polarity. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGPOL LL_DMA_GetTriggerPolarity + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_TRIG_POLARITY_MASKED + * @arg @ref LL_DMA_TRIG_POLARITY_RISING + * @arg @ref LL_DMA_TRIG_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_DMA_GetTriggerPolarity(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TRIGPOL)); +} + +/** + * @brief Set trigger Mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGM LL_DMA_SetTriggerMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param TriggerMode This parameter can be one of the following values: + * @arg @ref LL_DMA_TRIGM_BLK_TRANSFER + * @arg @ref LL_DMA_TRIGM_RPT_BLK_TRANSFER (This value is allowed only for 2D addressing channels) + * @arg @ref LL_DMA_TRIGM_LLI_LINK_TRANSFER + * @arg @ref LL_DMA_TRIGM_SINGLBURST_TRANSFER + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetTriggerMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t TriggerMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TRIGM, + TriggerMode); +} + +/** + * @brief Get trigger Mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGM LL_DMA_GetTriggerMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_TRIGM_BLK_TRANSFER + * @arg @ref LL_DMA_TRIGM_RPT_BLK_TRANSFER (This value is allowed only for 2D addressing channels) + * @arg @ref LL_DMA_TRIGM_LLI_LINK_TRANSFER + * @arg @ref LL_DMA_TRIGM_SINGLBURST_TRANSFER + */ +__STATIC_INLINE uint32_t LL_DMA_GetTriggerMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TRIGM)); +} + +/** + * @brief Set destination hardware and software transfer request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 DREQ LL_DMA_SetDataTransferDirection\n + * @rmtoll CTR2 SWREQ LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, + DMA_CTR2_DREQ | DMA_CTR2_SWREQ, Direction); +} + +/** + * @brief Get destination hardware and software transfer request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 DREQ LL_DMA_GetDataTransferDirection\n + * @rmtoll CTR2 SWREQ LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, + DMA_CTR2_DREQ | DMA_CTR2_SWREQ)); +} + +/** + * @brief Set block hardware request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 BREQ LL_DMA_SetBlkHWRequest\n + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkHWRequest This parameter can be one of the following values: + * @arg @ref LL_DMA_HWREQUEST_SINGLEBURST + * @arg @ref LL_DMA_HWREQUEST_BLK + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkHWRequest(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t BlkHWRequest) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_BREQ, + BlkHWRequest); +} + +/** + * @brief Get block hardware request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 BREQ LL_DMA_GetBlkHWRequest\n + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_HWREQUEST_SINGLEBURST + * @arg @ref LL_DMA_HWREQUEST_BLK + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkHWRequest(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_BREQ)); +} + +/** + * @brief Set hardware request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 REQSEL LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_HPDMA1_REQUEST_JPEG_RX + * @arg @ref LL_HPDMA1_REQUEST_JPEG_TX + * @arg @ref LL_HPDMA1_REQUEST_XSPI1 + * @arg @ref LL_HPDMA1_REQUEST_XSPI2 + * @arg @ref LL_HPDMA1_REQUEST_SPI3_RX + * @arg @ref LL_HPDMA1_REQUEST_SPI3_TX + * @arg @ref LL_HPDMA1_REQUEST_SPI4_RX + * @arg @ref LL_HPDMA1_REQUEST_SPI4_TX + * @arg @ref LL_HPDMA1_REQUEST_ADC1 + * @arg @ref LL_HPDMA1_REQUEST_ADC2 + * @arg @ref LL_HPDMA1_REQUEST_ADF1_FLT0 + * @arg @ref LL_HPDMA1_REQUEST_UART4_RX + * @arg @ref LL_HPDMA1_REQUEST_UART4_TX + * @arg @ref LL_HPDMA1_REQUEST_UART5_RX + * @arg @ref LL_HPDMA1_REQUEST_UART5_TX + * @arg @ref LL_HPDMA1_REQUEST_UART7_RX + * @arg @ref LL_HPDMA1_REQUEST_UART7_TX + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_IC1 + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_IC2 + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_UE + * @arg @ref LL_GPDMA1_REQUEST_ADC1 + * @arg @ref LL_GPDMA1_REQUEST_ADC2 + * @arg @ref LL_GPDMA1_REQUEST_CRYP_IN + * @arg @ref LL_GPDMA1_REQUEST_CRYP_OUT + * @arg @ref LL_GPDMA1_REQUEST_SAES_IN + * @arg @ref LL_GPDMA1_REQUEST_SAES_OUT + * @arg @ref LL_GPDMA1_REQUEST_HASH_IN + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM1_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM1_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM2_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM3_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM4_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM5_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM6_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM7_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM15_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM15_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM15_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM15_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM15_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM16_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM16_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM16_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM17_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM17_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM17_COM + * @arg @ref LL_GPDMA1_REQUEST_SPI1_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI1_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI2_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI2_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI3_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI3_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI4_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI4_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI5_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI5_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI6_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI6_TX + * @arg @ref LL_GPDMA1_REQUEST_SAI1_A + * @arg @ref LL_GPDMA1_REQUEST_SAI1_B + * @arg @ref LL_GPDMA1_REQUEST_SAI2_A + * @arg @ref LL_GPDMA1_REQUEST_SAI2_B + * @arg @ref LL_GPDMA1_REQUEST_I2C1_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C1_TX + * @arg @ref LL_GPDMA1_REQUEST_I2C2_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C2_TX + * @arg @ref LL_GPDMA1_REQUEST_I2C3_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C3_TX + * @arg @ref LL_GPDMA1_REQUEST_USART1_RX + * @arg @ref LL_GPDMA1_REQUEST_USART1_TX + * @arg @ref LL_GPDMA1_REQUEST_USART2_RX + * @arg @ref LL_GPDMA1_REQUEST_USART2_TX + * @arg @ref LL_GPDMA1_REQUEST_USART3_RX + * @arg @ref LL_GPDMA1_REQUEST_USART3_TX + * @arg @ref LL_GPDMA1_REQUEST_UART4_RX + * @arg @ref LL_GPDMA1_REQUEST_UART4_TX + * @arg @ref LL_GPDMA1_REQUEST_UART5_RX + * @arg @ref LL_GPDMA1_REQUEST_UART5_TX + * @arg @ref LL_GPDMA1_REQUEST_UART7_RX + * @arg @ref LL_GPDMA1_REQUEST_UART7_TX + * @arg @ref LL_GPDMA1_REQUEST_UART8_RX + * @arg @ref LL_GPDMA1_REQUEST_UART8_TX + * @arg @ref LL_GPDMA1_REQUEST_CORDIC_READ + * @arg @ref LL_GPDMA1_REQUEST_CORDIC_WRITE + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_UE + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_UE + * @arg @ref LL_GPDMA1_REQUEST_SPDIF_RX_DT + * @arg @ref LL_GPDMA1_REQUEST_SPDIF_RX_CS + * @arg @ref LL_GPDMA1_REQUEST_ADF1_FLT0 + * @arg @ref LL_GPDMA1_REQUEST_UCPD1_TX + * @arg @ref LL_GPDMA1_REQUEST_UCPD1_RX + * @arg @ref LL_GPDMA1_REQUEST_PSSI + * @arg @ref LL_GPDMA1_REQUEST_LPUART1_RX + * @arg @ref LL_GPDMA1_REQUEST_LPUART1_TX + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_UE + * @arg @ref LL_GPDMA1_REQUEST_I3C1_RX + * @arg @ref LL_GPDMA1_REQUEST_I3C1_TX + * @arg @ref LL_GPDMA1_REQUEST_I3C1_TC + * @arg @ref LL_GPDMA1_REQUEST_I3C1_RS + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_REQSEL, Request); +} + +/** + * @brief Get hardware request. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 REQSEL LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_HPDMA1_REQUEST_JPEG_RX + * @arg @ref LL_HPDMA1_REQUEST_JPEG_TX + * @arg @ref LL_HPDMA1_REQUEST_XSPI1 + * @arg @ref LL_HPDMA1_REQUEST_XSPI2 + * @arg @ref LL_HPDMA1_REQUEST_SPI3_RX + * @arg @ref LL_HPDMA1_REQUEST_SPI3_TX + * @arg @ref LL_HPDMA1_REQUEST_SPI4_RX + * @arg @ref LL_HPDMA1_REQUEST_SPI4_TX + * @arg @ref LL_HPDMA1_REQUEST_ADC1 + * @arg @ref LL_HPDMA1_REQUEST_ADC2 + * @arg @ref LL_HPDMA1_REQUEST_ADF1_FLT0 + * @arg @ref LL_HPDMA1_REQUEST_UART4_RX + * @arg @ref LL_HPDMA1_REQUEST_UART4_TX + * @arg @ref LL_HPDMA1_REQUEST_UART5_RX + * @arg @ref LL_HPDMA1_REQUEST_UART5_TX + * @arg @ref LL_HPDMA1_REQUEST_UART7_RX + * @arg @ref LL_HPDMA1_REQUEST_UART7_TX + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_IC1 + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_IC2 + * @arg @ref LL_HPDMA1_REQUEST_LPTIM2_UE + * @arg @ref LL_GPDMA1_REQUEST_ADC1 + * @arg @ref LL_GPDMA1_REQUEST_ADC2 + * @arg @ref LL_GPDMA1_REQUEST_CRYP_IN + * @arg @ref LL_GPDMA1_REQUEST_CRYP_OUT + * @arg @ref LL_GPDMA1_REQUEST_SAES_IN + * @arg @ref LL_GPDMA1_REQUEST_SAES_OUT + * @arg @ref LL_GPDMA1_REQUEST_HASH_IN + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM1_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM1_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM1_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM2_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM2_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM3_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM3_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM4_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM4_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH3 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_CH4 + * @arg @ref LL_GPDMA1_REQUEST_TIM5_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM5_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM6_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM7_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM15_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM15_CH2 + * @arg @ref LL_GPDMA1_REQUEST_TIM15_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM15_TRIG + * @arg @ref LL_GPDMA1_REQUEST_TIM15_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM16_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM16_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM16_COM + * @arg @ref LL_GPDMA1_REQUEST_TIM17_CH1 + * @arg @ref LL_GPDMA1_REQUEST_TIM17_UP + * @arg @ref LL_GPDMA1_REQUEST_TIM17_COM + * @arg @ref LL_GPDMA1_REQUEST_SPI1_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI1_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI2_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI2_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI3_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI3_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI4_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI4_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI5_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI5_TX + * @arg @ref LL_GPDMA1_REQUEST_SPI6_RX + * @arg @ref LL_GPDMA1_REQUEST_SPI6_TX + * @arg @ref LL_GPDMA1_REQUEST_SAI1_A + * @arg @ref LL_GPDMA1_REQUEST_SAI1_B + * @arg @ref LL_GPDMA1_REQUEST_SAI2_A + * @arg @ref LL_GPDMA1_REQUEST_SAI2_B + * @arg @ref LL_GPDMA1_REQUEST_I2C1_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C1_TX + * @arg @ref LL_GPDMA1_REQUEST_I2C2_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C2_TX + * @arg @ref LL_GPDMA1_REQUEST_I2C3_RX + * @arg @ref LL_GPDMA1_REQUEST_I2C3_TX + * @arg @ref LL_GPDMA1_REQUEST_USART1_RX + * @arg @ref LL_GPDMA1_REQUEST_USART1_TX + * @arg @ref LL_GPDMA1_REQUEST_USART2_RX + * @arg @ref LL_GPDMA1_REQUEST_USART2_TX + * @arg @ref LL_GPDMA1_REQUEST_USART3_RX + * @arg @ref LL_GPDMA1_REQUEST_USART3_TX + * @arg @ref LL_GPDMA1_REQUEST_UART4_RX + * @arg @ref LL_GPDMA1_REQUEST_UART4_TX + * @arg @ref LL_GPDMA1_REQUEST_UART5_RX + * @arg @ref LL_GPDMA1_REQUEST_UART5_TX + * @arg @ref LL_GPDMA1_REQUEST_UART7_RX + * @arg @ref LL_GPDMA1_REQUEST_UART7_TX + * @arg @ref LL_GPDMA1_REQUEST_UART8_RX + * @arg @ref LL_GPDMA1_REQUEST_UART8_TX + * @arg @ref LL_GPDMA1_REQUEST_CORDIC_READ + * @arg @ref LL_GPDMA1_REQUEST_CORDIC_WRITE + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM1_UE + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM2_UE + * @arg @ref LL_GPDMA1_REQUEST_SPDIF_RX_DT + * @arg @ref LL_GPDMA1_REQUEST_SPDIF_RX_CS + * @arg @ref LL_GPDMA1_REQUEST_ADF1_FLT0 + * @arg @ref LL_GPDMA1_REQUEST_UCPD1_TX + * @arg @ref LL_GPDMA1_REQUEST_UCPD1_RX + * @arg @ref LL_GPDMA1_REQUEST_PSSI + * @arg @ref LL_GPDMA1_REQUEST_LPUART1_RX + * @arg @ref LL_GPDMA1_REQUEST_LPUART1_TX + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_IC1 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_IC2 + * @arg @ref LL_GPDMA1_REQUEST_LPTIM3_UE + * @arg @ref LL_GPDMA1_REQUEST_I3C1_RX + * @arg @ref LL_GPDMA1_REQUEST_I3C1_TX + * @arg @ref LL_GPDMA1_REQUEST_I3C1_TC + * @arg @ref LL_GPDMA1_REQUEST_I3C1_RS + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_REQSEL)); +} + +/** + * @brief Set hardware trigger. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGSEL LL_DMA_SetHWTrigger + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Trigger This parameter can be one of the following values: + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_FRAMEEND + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_HSYNC + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_LINEEND + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_VSYNC + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_CTC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_TC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_TW_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_EOC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_IFNF_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_IFT_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_OFNE_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_OFT_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_LCD + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG0 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG1 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG2 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG3 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_4 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_3 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_2 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_1 + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH0_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH1_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH2_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH3_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH4_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH5_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH6_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH7_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH8_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH9_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH10_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH11_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH12_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH13_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH14_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH15_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH0_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH1_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH2_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH3_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH4_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH5_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH6_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH7_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH8_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH9_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH10_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH11_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH12_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH13_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH14_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH1_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH2_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH3_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH4_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH5_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH6_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH7_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH8_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH9_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH10_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH11_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH12_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH13_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH14_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM1_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM1_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM2_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM2_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM3_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM3_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM4_OUT + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM5_OUT + * @arg @ref LL_GPDMA1_TRIGGER_EXTIT0_SYNC + * @arg @ref LL_GPDMA1_TRIGGER_RTC_WKUP + * @arg @ref LL_GPDMA1_TRIGGER_LPUART1_IT_R_WUP_ASYNC + * @arg @ref LL_GPDMA1_TRIGGER_LPUART1_IT_T_WUP_ASYNC + * @arg @ref LL_GPDMA1_TRIGGER_SPI6_IT_OR_SPI6_AIT_SYNC + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH0_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH1_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH2_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH3_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH4_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH5_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH6_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH7_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH8_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH9_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH10_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH11_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH12_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH13_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH14_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_TIM1_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM1_TRGO2 + * @arg @ref LL_GPDMA1_TRIGGER_TIM2_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM3_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM4_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM5_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM6_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM7_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM9_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM12_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM15_TRGO + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetHWTrigger(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Trigger) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_TRIGSEL, + (Trigger << DMA_CTR2_TRIGSEL_Pos) & DMA_CTR2_TRIGSEL); +} + +/** + * @brief Get hardware triggers. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGSEL LL_DMA_GetHWTrigger + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_FRAMEEND + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_HSYNC + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_LINEEND + * @arg @ref LL_HPDMA1_TRIGGER_DCMIPP_EVT_VSYNC + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_CTC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_TC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_DMA2D_TW_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_EOC_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_IFNF_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_IFT_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_OFNE_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_JPEG_OFT_FLAG + * @arg @ref LL_HPDMA1_TRIGGER_LCD + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG0 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG1 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG2 + * @arg @ref LL_HPDMA1_TRIGGER_GPU2D1_GP_FLAG3 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_4 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_3 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_2 + * @arg @ref LL_HPDMA1_TRIGGER_GFXTIM_0_EVT_1 + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH0_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH1_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH2_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH3_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH4_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH5_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH6_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH7_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH8_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH9_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH10_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH11_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH12_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH13_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH14_TCF + * @arg @ref LL_HPDMA1_TRIGGER_GPDMA1_CH15_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH0_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH1_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH2_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH3_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH4_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH5_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH6_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH7_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH8_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH9_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH10_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH11_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH12_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH13_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH14_TCF + * @arg @ref LL_HPDMA1_TRIGGER_HPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH1_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH2_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH3_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH4_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH5_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH6_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH7_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH8_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH9_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH10_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH11_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH12_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH13_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH14_TCF + * @arg @ref LL_GPDMA1_TRIGGER_HPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM1_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM1_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM2_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM2_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM3_CH1 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM3_CH2 + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM4_OUT + * @arg @ref LL_GPDMA1_TRIGGER_LPTIM5_OUT + * @arg @ref LL_GPDMA1_TRIGGER_EXTIT0_SYNC + * @arg @ref LL_GPDMA1_TRIGGER_RTC_WKUP + * @arg @ref LL_GPDMA1_TRIGGER_LPUART1_IT_R_WUP_ASYNC + * @arg @ref LL_GPDMA1_TRIGGER_LPUART1_IT_T_WUP_ASYNC + * @arg @ref LL_GPDMA1_TRIGGER_SPI6_IT_OR_SPI6_AIT_SYNC + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH0_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH1_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH2_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH3_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH4_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH5_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH6_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH7_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH8_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH9_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH10_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH11_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH12_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH13_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH14_TCF + * @arg @ref LL_GPDMA1_TRIGGER_GPDMA1_CH15_TCF + * @arg @ref LL_GPDMA1_TRIGGER_TIM1_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM1_TRGO2 + * @arg @ref LL_GPDMA1_TRIGGER_TIM2_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM3_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM4_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM5_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM6_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM7_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM9_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM12_TRGO + * @arg @ref LL_GPDMA1_TRIGGER_TIM15_TRGO + */ +__STATIC_INLINE uint32_t LL_DMA_GetHWTrigger(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, + DMA_CTR2_TRIGSEL) >> DMA_CTR2_TRIGSEL_Pos); +} + +/** + * @brief Set DMA transfer mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 PFREQ LL_DMA_SetTransferMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 (HW request peripheral flow control mode supported on GPDMA1) + * @arg @ref LL_DMA_CHANNEL_15 (HW request peripheral flow control mode supported on GPDMA1 & HPDMA1) + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_NORMAL + * @arg @ref LL_DMA_PFCTRL + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetTransferMode(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, DMA_CTR2_PFREQ, + Mode & DMA_CTR2_PFREQ); +} + +/** + * @brief Get DMA transfer mode. + * @note This API is used for all available DMA channels. + * @rmtoll CTR2 TRIGSEL LL_DMA_GetTransferMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 (HW request peripheral flow control mode supported on GPDMA1) + * @arg @ref LL_DMA_CHANNEL_15 (HW request peripheral flow control mode supported on GPDMA1 & HPDMA1) + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_NORMAL + * @arg @ref LL_DMA_PFCTRL + */ +__STATIC_INLINE uint32_t LL_DMA_GetTransferMode(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR2, + DMA_CTR2_PFREQ)); +} + +/** + * @brief Configure addresses update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRDDEC LL_DMA_ConfigBlkRptAddrUpdate\n + * CBR1 BRSDEC LL_DMA_ConfigBlkRptAddrUpdate\n + * CBR1 DDEC LL_DMA_ConfigBlkRptAddrUpdate\n + * CBR1 SDEC LL_DMA_ConfigBlkRptAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_BLKRPT_DEST_ADDR_INCREMENT or @ref LL_DMA_BLKRPT_DEST_ADDR_DECREMENT + * @arg @ref LL_DMA_BLKRPT_SRC_ADDR_INCREMENT or @ref LL_DMA_BLKRPT_SRC_ADDR_DECREMENT + * @arg @ref LL_DMA_BURST_DEST_ADDR_INCREMENT or @ref LL_DMA_BURST_DEST_ADDR_DECREMENT + * @arg @ref LL_DMA_BURST_SRC_ADDR_INCREMENT or @ref LL_DMA_BURST_SRC_ADDR_DECREMENT + *@retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigBlkRptAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, + DMA_CBR1_BRDDEC | DMA_CBR1_BRSDEC | DMA_CBR1_DDEC | DMA_CBR1_SDEC, Configuration); +} + +/** + * @brief Configure DMA Block number of data and repeat Count. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BNDT LL_DMA_ConfigBlkCounters\n + * CBR1 BRC LL_DMA_ConfigBlkCounters + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkDataLength Block transfer length + Value between 0 to 0x0000FFFF + * @param BlkRptCount Block repeat counter + * Value between 0 to 0x000007FF + *@retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigBlkCounters(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t BlkDataLength, + uint32_t BlkRptCount) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, + (DMA_CBR1_BNDT | DMA_CBR1_BRC), (BlkDataLength | (BlkRptCount << DMA_CBR1_BRC_Pos))); +} + +/** + * @brief Set block repeat destination address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRDDEC LL_DMA_SetBlkRptDestAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptDestAddrUpdate This parameter can be one of the following values: + * @arg @ref LL_DMA_BLKRPT_DEST_ADDR_INCREMENT + * @arg @ref LL_DMA_BLKRPT_DEST_ADDR_DECREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkRptDestAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t BlkRptDestAddrUpdate) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BRDDEC, + BlkRptDestAddrUpdate); +} + +/** + * @brief Get block repeat destination address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRDDEC LL_DMA_GetBlkRptDestAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_BLKRPT_DEST_ADDR_INCREMENT + * @arg @ref LL_DMA_BLKRPT_DEST_ADDR_DECREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkRptDestAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BRDDEC)); +} + +/** + * @brief Set block repeat source address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRSDEC LL_DMA_SetBlkRptSrcAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptSrcAddrUpdate This parameter can be one of the following values: + * @arg @ref LL_DMA_BLKRPT_SRC_ADDR_INCREMENT + * @arg @ref LL_DMA_BLKRPT_SRC_ADDR_DECREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkRptSrcAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t BlkRptSrcAddrUpdate) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BRSDEC, + BlkRptSrcAddrUpdate); +} + +/** + * @brief Get block repeat source address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRSDEC LL_DMA_GetBlkRptSrcAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_BLKRPT_SRC_ADDR_INCREMENT + * @arg @ref LL_DMA_BLKRPT_SRC_ADDR_DECREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkRptSrcAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BRSDEC)); +} + +/** + * @brief Set destination address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 DDEC LL_DMA_SetDestAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestAddrUpdate This parameter can be one of the following values: + * @arg @ref LL_DMA_BURST_DEST_ADDR_INCREMENT + * @arg @ref LL_DMA_BURST_DEST_ADDR_DECREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestAddrUpdate) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_DDEC, + DestAddrUpdate); +} + +/** + * @brief Get destination address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 DDEC LL_DMA_GetDestAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_BURST_DEST_ADDR_INCREMENT + * @arg @ref LL_DMA_BURST_DEST_ADDR_DECREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_DDEC)); +} + +/** + * @brief Set source address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 SDEC LL_DMA_SetSrcAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcAddrUpdate This parameter can be one of the following values: + * @arg @ref LL_DMA_BURST_SRC_ADDR_INCREMENT + * @arg @ref LL_DMA_BURST_SRC_ADDR_DECREMENT + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddrUpdate) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_SDEC, + SrcAddrUpdate); +} + +/** + * @brief Get source address update. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 SDEC LL_DMA_GetSrcAddrUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_BURST_SRC_ADDR_INCREMENT + * @arg @ref LL_DMA_BURST_SRC_ADDR_DECREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcAddrUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_SDEC)); +} + +/** + * @brief Set block repeat count. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRC LL_DMA_SetBlkRptCount + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptCount Block repeat counter + * Value between 0 to 0x000007FF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkRptCount(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t BlkRptCount) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BRC, + (BlkRptCount << DMA_CBR1_BRC_Pos) & DMA_CBR1_BRC); +} + +/** + * @brief Get block repeat count. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR1 BRC LL_DMA_GetBlkRptCount + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x000007FF + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkRptCount(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, + DMA_CBR1_BRC) >> DMA_CBR1_BRC_Pos); +} + +/** + * @brief Set block data length in bytes to transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CBR1 BNDT LL_DMA_SetBlkDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkDataLength Between 0 to 0x0000FFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkDataLength(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t BlkDataLength) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BNDT, + BlkDataLength); +} + +/** + * @brief Get block data length in bytes to transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CBR1 BNDT LL_DMA_GetBlkDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x0000FFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkDataLength(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR1, DMA_CBR1_BNDT)); +} + +/** + * @brief Configure the source and destination addresses. + * @note This API is used for all available DMA channels. + * @note This API must not be called when the DMA Channel is enabled. + * @rmtoll CSAR SA LL_DMA_ConfigAddresses\n + * CDAR DA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcAddress Between 0 to 0xFFFFFFFF + * @param DestAddress Between 0 to 0xFFFFFFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, uint32_t + DestAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CDAR, DestAddress); +} + +/** + * @brief Set source address. + * @note This API is used for all available DMA channels. + * @rmtoll CSAR SA LL_DMA_SetSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcAddress Between 0 to 0xFFFFFFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSAR, SrcAddress); +} + +/** + * @brief Get source address. + * @note This API is used for all available DMA channels. + * @rmtoll CSAR SA LL_DMA_GetSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSAR)); +} + +/** + * @brief Set destination address. + * @note This API is used for all available DMA channels. + * @rmtoll CDAR DA LL_DMA_SetDestAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestAddress Between 0 to 0xFFFFFFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestAddress(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CDAR, DestAddress); +} + +/** + * @brief Get destination address. + * @note This API is used for all available DMA channels. + * @rmtoll CDAR DA LL_DMA_GetDestAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestAddress(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CDAR)); +} + +/** + * @brief Configure source and destination addresses offset. + * @note This API is used only for 2D addressing channels. + * @note This API must not be called when the DMA Channel is enabled. + * @rmtoll CTR3 DAO LL_DMA_ConfigAddrUpdateValue\n + * CTR3 SAO LL_DMA_ConfigAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestAddrOffset Between 0 to 0x00001FFF + * @param SrcAddrOffset Between 0 to 0x00001FFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddrOffset, + uint32_t DestAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR3, + (SrcAddrOffset & DMA_CTR3_SAO) | ((DestAddrOffset << DMA_CTR3_DAO_Pos) & DMA_CTR3_DAO)); +} + +/** + * @brief Set destination address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CTR3 DAO LL_DMA_SetDestAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DestAddrOffset Between 0 to 0x00001FFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetDestAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t DestAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR3, DMA_CTR3_DAO, + ((DestAddrOffset << DMA_CTR3_DAO_Pos) & DMA_CTR3_DAO)); +} + +/** + * @brief Get destination address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CDAR DAO LL_DMA_GetDestAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x00001FFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDestAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR3, + DMA_CTR3_DAO) >> DMA_CTR3_DAO_Pos); +} + +/** + * @brief Set source address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CTR3 SAO LL_DMA_SetSrcAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param SrcAddrOffset Between 0 to 0x00001FFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetSrcAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR3, DMA_CTR3_SAO, + SrcAddrOffset & DMA_CTR3_SAO); +} + +/** + * @brief Get source address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CTR3 SAO LL_DMA_GetSrcAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x00001FFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetSrcAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CTR3, DMA_CTR3_SAO)); +} + +/** + * @brief Configure the block repeated source and destination addresses offset. + * @note This API is used only for 2D addressing channels. + * @note This API must not be called when the DMA Channel is enabled. + * @rmtoll CBR2 BRDAO LL_DMA_ConfigBlkRptAddrUpdateValue\n + * CBR2 BRSAO LL_DMA_ConfigBlkRptAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptDestAddrOffset Between 0 to 0x0000FFFF + * @param BlkRptSrcAddrOffset Between 0 to 0x0000FFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigBlkRptAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t BlkRptSrcAddrOffset, uint32_t BlkRptDestAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR2, + ((BlkRptDestAddrOffset << DMA_CBR2_BRDAO_Pos) & DMA_CBR2_BRDAO) | (BlkRptSrcAddrOffset & DMA_CBR2_BRSAO)); +} + +/** + * @brief Set block repeated destination address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR2 BRDAO LL_DMA_SetBlkRptDestAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptDestAddrOffset Between 0 to 0x0000FFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkRptDestAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t BlkRptDestAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR2, DMA_CBR2_BRDAO, + ((BlkRptDestAddrOffset << DMA_CBR2_BRDAO_Pos) & DMA_CBR2_BRDAO)); +} + +/** + * @brief Get block repeated destination address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR2 BRDAO LL_DMA_GetBlkRptDestAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x0000FFFF. + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkRptDestAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR2, + DMA_CBR2_BRDAO) >> DMA_CBR2_BRDAO_Pos); +} + +/** + * @brief Set block repeated source address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR2 BRSAO LL_DMA_SetBlkRptSrcAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param BlkRptSrcAddrOffset Between 0 to 0x0000FFFF + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetBlkRptSrcAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t BlkRptSrcAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR2, DMA_CBR2_BRSAO, + BlkRptSrcAddrOffset); +} + +/** + * @brief Get block repeated source address offset. + * @note This API is used only for 2D addressing channels. + * @rmtoll CBR2 BRSAO LL_DMA_GetBlkRptSrcAddrUpdateValue + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x0000FFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetBlkRptSrcAddrUpdateValue(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CBR2, DMA_CBR2_BRSAO)); +} + +/** + * @brief Configure registers update and node address offset during the link transfer. + * @note This API is used for all available DMA channels. + * For linear addressing channels, UT3 and UB2 fields are discarded. + * @rmtoll CLLR UT1 LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR UT2 LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR UB1 LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR USA LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR UDA LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR UT3 LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR UB2 LL_DMA_ConfigLinkUpdate\n + * @rmtoll CLLR ULL LL_DMA_ConfigLinkUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param RegistersUpdate This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_UPDATE_CTR1 + * @arg @ref LL_DMA_UPDATE_CTR2 + * @arg @ref LL_DMA_UPDATE_CBR1 + * @arg @ref LL_DMA_UPDATE_CSAR + * @arg @ref LL_DMA_UPDATE_CDAR + * @arg @ref LL_DMA_UPDATE_CTR3 (This value is allowed only for 2D addressing channels) + * @arg @ref LL_DMA_UPDATE_CBR2 (This value is allowed only for 2D addressing channels) + * @arg @ref LL_DMA_UPDATE_CLLR + * @param LinkedListAddrOffset Between 0 to 0x0000FFFC by increment of 4 Bytes. + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ConfigLinkUpdate(const DMA_TypeDef *DMAx, uint32_t Channel, uint32_t RegistersUpdate, + uint32_t LinkedListAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, + (DMA_CLLR_UT1 | DMA_CLLR_UT2 | DMA_CLLR_UB1 | DMA_CLLR_USA | DMA_CLLR_UDA | DMA_CLLR_UT3 | \ + DMA_CLLR_UB2 | DMA_CLLR_ULL | DMA_CLLR_LA), (RegistersUpdate | (LinkedListAddrOffset & DMA_CLLR_LA))); +} + +/** + * @brief Enable CTR1 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT1 LL_DMA_EnableCTR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCTR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT1); +} + +/** + * @brief Disable CTR1 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT1 LL_DMA_DisableCTR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCTR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT1); +} + +/** + * @brief Check if CTR1 update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT1 LL_DMA_IsEnabledCTR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCTR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT1) + == (DMA_CLLR_UT1)) ? 1UL : 0UL); +} + +/** + * @brief Enable CTR2 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT2 LL_DMA_EnableCTR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCTR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT2); +} + +/** + * @brief Disable CTR2 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT2 LL_DMA_DisableCTR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCTR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT2); +} + +/** + * @brief Check if CTR2 update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UT2 LL_DMA_IsEnabledCTR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCTR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT2) + == (DMA_CLLR_UT2)) ? 1UL : 0UL); +} + +/** + * @brief Enable CBR1 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UB1 LL_DMA_EnableCBR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCBR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB1); +} + +/** + * @brief Disable CBR1 update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UB1 LL_DMA_DisableCBR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCBR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB1); +} + +/** + * @brief Check if CBR1 update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UB1 LL_DMA_IsEnabledCBR1Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCBR1Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB1) + == (DMA_CLLR_UB1)) ? 1UL : 0UL); +} + +/** + * @brief Enable CSAR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR USA LL_DMA_EnableCSARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCSARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_USA); +} + +/** + * @brief Disable CSAR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR USA LL_DMA_DisableCSARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCSARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_USA); +} + +/** + * @brief Check if CSAR update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR USA LL_DMA_IsEnabledCSARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCSARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_USA) + == (DMA_CLLR_USA)) ? 1UL : 0UL); +} + +/** + * @brief Enable CDAR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UDA LL_DMA_EnableCDARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCDARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UDA); +} + +/** + * @brief Disable CDAR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UDA LL_DMA_DisableCDARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCDARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UDA); +} + +/** + * @brief Check if CDAR update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR UDA LL_DMA_IsEnabledCDARUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCDARUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UDA) + == (DMA_CLLR_UDA)) ? 1UL : 0UL); +} + +/** + * @brief Enable CTR3 update during the link transfer. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UT3 LL_DMA_EnableCTR3Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCTR3Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT3); +} + +/** + * @brief Disable CTR3 update during the link transfer. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UT3 LL_DMA_DisableCTR3Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCTR3Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT3); +} + +/** + * @brief Check if CTR3 update during the link transfer is enabled. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UT3 LL_DMA_IsEnabledCTR3Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCTR3Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UT3) + == (DMA_CLLR_UT3)) ? 1UL : 0UL); +} + +/** + * @brief Enable CBR2 update during the link transfer. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UB2 LL_DMA_EnableCBR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCBR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB2); +} + +/** + * @brief Disable CBR2 update during the link transfer. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UB2 LL_DMA_DisableCBR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCBR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB2); +} + +/** + * @brief Check if CBR2 update during the link transfer is enabled. + * @note This API is used only for 2D addressing channels. + * @rmtoll CLLR UB2 LL_DMA_IsEnabledCBR2Update + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCBR2Update(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_UB2) + == (DMA_CLLR_UB2)) ? 1UL : 0UL); +} + +/** + * @brief Enable CLLR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR ULL LL_DMA_EnableCLLRUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableCLLRUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_ULL); +} + +/** + * @brief Disable CLLR update during the link transfer. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR ULL LL_DMA_DisableCLLRUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableCLLRUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_ULL); +} + +/** + * @brief Check if CLLR update during the link transfer is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR ULL LL_DMA_IsEnabledCLLRUpdate + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledCLLRUpdate(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_ULL) + == (DMA_CLLR_ULL)) ? 1UL : 0UL); +} + +/** + * @brief Set linked list address offset. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR LA LL_DMA_SetLinkedListAddrOffset + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param LinkedListAddrOffset Between 0 to 0x0000FFFC by increment of 4 Bytes. + * @retval None. + */ +__STATIC_INLINE void LL_DMA_SetLinkedListAddrOffset(const DMA_TypeDef *DMAx, uint32_t Channel, + uint32_t LinkedListAddrOffset) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, DMA_CLLR_LA, + (LinkedListAddrOffset & DMA_CLLR_LA)); +} + +/** + * @brief Get linked list address offset. + * @note This API is used for all available DMA channels. + * @rmtoll CLLR LA LL_DMA_GetLinkedListAddrOffset + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x0000FFFC. + */ +__STATIC_INLINE uint32_t LL_DMA_GetLinkedListAddrOffset(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CLLR, + DMA_CLLR_LA) >> DMA_CLLR_LA_Pos); +} + +/** + * @brief Get FIFO level. + * @rmtoll CSR FIFOL LL_DMA_GetFIFOLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval Between 0 to 0x000000FF. + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOLevel(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, + DMA_CSR_FIFOL) >> DMA_CSR_FIFOL_Pos); +} + + +/** + * @brief Enable the DMA channel privilege attribute. + * @note This API is used for all available DMA channels. + * @rmtoll PRIVCFGR PRIVx LL_DMA_EnableChannelPrivilege + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableChannelPrivilege(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(DMAx->PRIVCFGR, (DMA_PRIVCFGR_PRIV0 << (Channel & 0x0000000FU))); +} + +/** + * @brief Disable the DMA channel privilege attribute. + * @note This API is used for all available DMA channels. + * @rmtoll PRIVCFGR PRIVx LL_DMA_DisableChannelPrivilege + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableChannelPrivilege(DMA_TypeDef *DMAx, uint32_t Channel) +{ + CLEAR_BIT(DMAx->PRIVCFGR, (DMA_PRIVCFGR_PRIV0 << (Channel & 0x0000000FU))); +} + +/** + * @brief Check if DMA Channel privilege is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll PRIVCFGR PRIVx LL_DMA_IsEnabledChannelPrivilege + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannelPrivilege(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + return ((READ_BIT(DMAx->PRIVCFGR, (DMA_PRIVCFGR_PRIV0 << (Channel & 0x0000000FU))) + == (DMA_PRIVCFGR_PRIV0 << (Channel & 0x0000000FU))) ? 1UL : 0UL); +} + + +/** + * @brief Enable the DMA channel lock attributes. + * @note This API is used for all available DMA channels. + * @rmtoll RCFGLOCKR LOCKx LL_DMA_EnableChannelLockAttribute + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableChannelLockAttribute(DMA_TypeDef *DMAx, uint32_t Channel) +{ + SET_BIT(DMAx->RCFGLOCKR, (DMA_RCFGLOCKR_LOCK0 << (Channel & 0x0000000FU))); +} + + +/** + * @brief Check if DMA channel attributes are locked. + * @note This API is used for all available DMA channels. + * @rmtoll SECCFGR LOCKx LL_DMA_IsEnabledChannelLockAttribute + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannelLockAttribute(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + return ((READ_BIT(DMAx->RCFGLOCKR, (DMA_RCFGLOCKR_LOCK0 << (Channel & 0x0000000FU))) + == (DMA_RCFGLOCKR_LOCK0 << (Channel & 0x0000000FU))) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management Flag Management + * @{ + */ + +/** + * @brief Clear trigger overrun flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR TOF LL_DMA_ClearFlag_TO + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TO(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_TOF); +} + +/** + * @brief Clear suspension flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR SUSPF LL_DMA_ClearFlag_SUSP + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_SUSP(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_SUSPF); +} + +/** + * @brief Clear user setting error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR USEF LL_DMA_ClearFlag_USE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_USE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_USEF); +} + +/** + * @brief Clear link transfer error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR ULEF LL_DMA_ClearFlag_ULE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_ULE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_ULEF); +} + +/** + * @brief Clear data transfer error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR DTEF LL_DMA_ClearFlag_DTE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DTE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_DTEF); +} + +/** + * @brief Clear half transfer flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR HTF LL_DMA_ClearFlag_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_HTF); +} + +/** + * @brief Clear transfer complete flag. + * @note This API is used for all available DMA channels. + * @rmtoll CFCR TCF LL_DMA_ClearFlag_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CFCR, DMA_CFCR_TCF); +} + +/** + * @brief Get trigger overrun flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR TOF LL_DMA_IsActiveFlag_TO + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TO(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_TOF) + == (DMA_CSR_TOF)) ? 1UL : 0UL); +} + +/** + * @brief Get suspension flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR SUSPF LL_DMA_IsActiveFlag_SUSP + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_SUSP(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_SUSPF) + == (DMA_CSR_SUSPF)) ? 1UL : 0UL); +} + +/** + * @brief Get user setting error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR USEF LL_DMA_IsActiveFlag_USE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_USE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_USEF) + == (DMA_CSR_USEF)) ? 1UL : 0UL); +} + +/** + * @brief Get user setting error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR ULEF LL_DMA_IsActiveFlag_ULE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_ULE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_ULEF) + == (DMA_CSR_ULEF)) ? 1UL : 0UL); +} + +/** + * @brief Get data transfer error flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR DTEF LL_DMA_IsActiveFlag_DTE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DTE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_DTEF) + == (DMA_CSR_DTEF)) ? 1UL : 0UL); +} + +/** + * @brief Get half transfer flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR HTF LL_DMA_IsActiveFlag_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_HTF) + == (DMA_CSR_HTF)) ? 1UL : 0UL); +} + +/** + * @brief Get transfer complete flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR TCF LL_DMA_IsActiveFlag_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_TCF) + == (DMA_CSR_TCF)) ? 1UL : 0UL); +} + +/** + * @brief Get idle flag. + * @note This API is used for all available DMA channels. + * @rmtoll CSR IDLEF LL_DMA_IsActiveFlag_IDLE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_IDLE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CSR, DMA_CSR_IDLEF) + == (DMA_CSR_IDLEF)) ? 1UL : 0UL); +} + +/** + * @brief Check if masked interrupt is active. + * @note This API is used for all available DMA channels. + * @rmtoll MISR MISx LL_DMA_IsActiveFlag_MIS + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_MIS(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + return ((READ_BIT(DMAx->MISR, (DMA_MISR_MIS0 << (Channel & 0x0FU))) + == (DMA_MISR_MIS0 << (Channel & 0x0FU))) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable trigger overrun interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TOIE LL_DMA_EnableIT_TO + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_TO(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TOIE); +} + +/** + * @brief Enable suspension interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSPIE LL_DMA_EnableIT_SUSP + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_SUSP(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSPIE); +} + +/** + * @brief Enable user setting error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR USEIE LL_DMA_EnableIT_USE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_USE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_USEIE); +} + +/** + * @brief Enable update link transfer error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR ULEIE LL_DMA_EnableIT_ULE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_ULE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_ULEIE); +} + +/** + * @brief Enable data transfer error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR DTEIE LL_DMA_EnableIT_DTE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_DTE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_DTEIE); +} + +/** + * @brief Enable half transfer complete interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable transfer complete interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable trigger overrun interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TOIE LL_DMA_DisableIT_TO + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_TO(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TOIE); +} + +/** + * @brief Disable suspension interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSPIE LL_DMA_DisableIT_SUSP + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_SUSP(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSPIE); +} + +/** + * @brief Disable user setting error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR USEIE LL_DMA_DisableIT_USE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_USE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_USEIE); +} + +/** + * @brief Disable update link transfer error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR ULEIE LL_DMA_DisableIT_ULE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_ULE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_ULEIE); +} + +/** + * @brief Disable data transfer error interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR DTEIE LL_DMA_DisableIT_DTE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_DTE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_DTEIE); +} + +/** + * @brief Disable half transfer complete interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable transfer complete interrupt. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval None. + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Check if trigger overrun interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TOIE LL_DMA_IsEnabledIT_TO + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TO(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TOIE) + == DMA_CCR_TOIE) ? 1UL : 0UL); +} + +/** + * @brief Check if suspension interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR SUSPIE LL_DMA_IsEnabledIT_SUSP + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_SUSP(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_SUSPIE) + == DMA_CCR_SUSPIE) ? 1UL : 0UL); +} + +/** + * @brief Check if user setting error interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR USEIE LL_DMA_IsEnabledIT_USE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_USE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_USEIE) + == DMA_CCR_USEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if update link transfer error interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR ULEIE LL_DMA_IsEnabledIT_ULE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_ULE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_ULEIE) + == DMA_CCR_ULEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if data transfer error interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR DTEIE LL_DMA_IsEnabledIT_DTE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DTE(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_DTEIE) + == DMA_CCR_DTEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if half transfer complete interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE) + == DMA_CCR_HTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if transfer complete interrupt is enabled. + * @note This API is used for all available DMA channels. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(const DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + LL_DMA_CH_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE) + == DMA_CCR_TCIE) ? 1UL : 0UL); +} +/** + * @} + */ + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); + +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); +void LL_DMA_ListStructInit(LL_DMA_InitLinkedListTypeDef *DMA_InitLinkedListStruct); +void LL_DMA_NodeStructInit(LL_DMA_InitNodeTypeDef *DMA_InitNodeStruct); + +uint32_t LL_DMA_List_Init(DMA_TypeDef *DMAx, uint32_t Channel, + LL_DMA_InitLinkedListTypeDef *DMA_InitLinkedListStruct); +uint32_t LL_DMA_List_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); + +uint32_t LL_DMA_CreateLinkNode(const LL_DMA_InitNodeTypeDef *DMA_InitNodeStruct, LL_DMA_LinkNodeTypeDef *pNode); +void LL_DMA_ConnectLinkNode(LL_DMA_LinkNodeTypeDef *pPrevLinkNode, uint32_t PrevNodeCLLRIdx, + LL_DMA_LinkNodeTypeDef *pNewLinkNode, uint32_t NewNodeCLLRIdx); +void LL_DMA_DisconnectNextLinkNode(LL_DMA_LinkNodeTypeDef *pLinkNode, uint32_t LinkNodeCLLRIdx); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* GPDMA1 || HPDMA1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7RSxx_LL_DMA_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma2d.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma2d.h new file mode 100644 index 000000000..04d9afb35 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_dma2d.h @@ -0,0 +1,2231 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dma2d.h + * @author MCD Application Team + * @brief Header file of DMA2D LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_DMA2D_H +#define STM32H7RSxx_LL_DMA2D_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (DMA2D) + +/** @defgroup DMA2D_LL DMA2D + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures + * @{ + */ + +/** + * @brief LL DMA2D Init Structure Definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the DMA2D transfer mode. + - This parameter can be one value of @ref DMA2D_LL_EC_MODE. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetMode(). */ + + uint32_t ColorMode; /*!< Specifies the color format of the output image. + - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. + + This parameter can be modified afterwards using, + unitary function @ref LL_DMA2D_SetOutputColorMode(). */ + + uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputGreen; /*!< Specifies the Green value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputRed; /*!< Specifies the Red value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + - This parameter is not considered if RGB888 or RGB565 color mode is selected. + + This parameter can be modified afterwards using, + unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputMemoryAddress; /*!< Specifies the memory address. + - This parameter must be a number between: + Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */ + + uint32_t OutputSwapMode; /*!< Specifies the output swap mode color format of the output image. + - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_SWAP_MODE. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputSwapMode(). */ + + uint32_t LineOffsetMode; /*!< Specifies the output line offset mode. + - This parameter can be one value of @ref DMA2D_LL_EC_LINE_OFFSET_MODE. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetLineOffsetMode(). */ + + uint32_t LineOffset; /*!< Specifies the output line offset value. + - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetLineOffset(). */ + + uint32_t NbrOfLines; /*!< Specifies the number of lines of the area to be transferred. + - This parameter must be a number between: + Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetNbrOfLines(). */ + + uint32_t NbrOfPixelsPerLines; /*!< Specifies the number of pixels per lines of the area to be transferred. + - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. + + This parameter can be modified afterwards using, + unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */ + + uint32_t AlphaInversionMode; /*!< Specifies the output alpha inversion mode. + - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_INVERSION. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputAlphaInvMode(). */ + + uint32_t RBSwapMode; /*!< Specifies the output Red Blue swap mode. + - This parameter can be one value of @ref DMA2D_LL_EC_RED_BLUE_SWAP. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputRBSwapMode(). */ + +} LL_DMA2D_InitTypeDef; + +/** + * @brief LL DMA2D Layer Configuration Structure Definition + */ +typedef struct +{ + uint32_t MemoryAddress; /*!< Specifies the foreground or background memory address. + - This parameter must be a number between: + Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer, + - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */ + + uint32_t LineOffset; /*!< Specifies the foreground or background line offset value. + - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer, + - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */ + + uint32_t ColorMode; /*!< Specifies the foreground or background color mode. + - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer, + - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */ + + uint32_t CLUTColorMode; /*!< Specifies the foreground or background CLUT color mode. + - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer, + - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */ + + uint32_t CLUTSize; /*!< Specifies the foreground or background CLUT size. + - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer, + - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */ + + uint32_t AlphaMode; /*!< Specifies the foreground or background alpha mode. + - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer, + - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */ + + uint32_t Alpha; /*!< Specifies the foreground or background Alpha value. + - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer, + - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */ + + uint32_t Blue; /*!< Specifies the foreground or background Blue color value. + - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer, + - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */ + + uint32_t Green; /*!< Specifies the foreground or background Green color value. + - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer, + - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */ + + uint32_t Red; /*!< Specifies the foreground or background Red color value. + - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer, + - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */ + + uint32_t CLUTMemoryAddress; /*!< Specifies the foreground or background CLUT memory address. + - This parameter must be a number between: + Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer, + - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */ + + uint32_t AlphaInversionMode; /*!< Specifies the foreground or background alpha inversion mode. + - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_INVERSION. + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetAlphaInvMode() for foreground layer, + - @ref LL_DMA2D_BGND_SetAlphaInvMode() for background layer. */ + + uint32_t RBSwapMode; /*!< Specifies the foreground or background Red Blue swap mode. + This parameter can be one value of @ref DMA2D_LL_EC_RED_BLUE_SWAP . + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetRBSwapMode() for foreground layer, + - @ref LL_DMA2D_BGND_SetRBSwapMode() for background layer. */ + + uint32_t ChromaSubSampling; /*!< Configure the chroma sub-sampling mode for the YCbCr color mode + This parameter is applicable for foreground layer only. + This parameter can be one value of @ref DMA2D_LL_CHROMA_SUB_SAMPLING + + This parameter can be modified afterwards using unitary functions + - @ref LL_DMA2D_FGND_SetChrSubSampling() for foreground layer. */ + +} LL_DMA2D_LayerCfgTypeDef; + +/** + * @brief LL DMA2D Output Color Structure Definition + */ +typedef struct +{ + uint32_t ColorMode; /*!< Specifies the color format of the output image. + - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE. + + This parameter can be modified afterwards using + unitary function @ref LL_DMA2D_SetOutputColorMode(). */ + + uint32_t OutputBlue; /*!< Specifies the Blue value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards using, + unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputGreen; /*!< Specifies the Green value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputRed; /*!< Specifies the Red value of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + + uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected. + - This parameter must be a number between: + Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected. + - This parameter is not considered if RGB888 or RGB565 color mode is selected. + + This parameter can be modified afterwards, + using unitary function @ref LL_DMA2D_SetOutputColor() or configuration + function @ref LL_DMA2D_ConfigOutputColor(). */ + +} LL_DMA2D_ColorTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants + * @{ + */ + +/** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA2D_ReadReg function + * @{ + */ +#define LL_DMA2D_FLAG_CEIF DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ +#define LL_DMA2D_FLAG_CTCIF DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */ +#define LL_DMA2D_FLAG_CAEIF DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */ +#define LL_DMA2D_FLAG_TWIF DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ +#define LL_DMA2D_FLAG_TCIF DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ +#define LL_DMA2D_FLAG_TEIF DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA2D_ReadReg and LL_DMA2D_WriteReg functions + * @{ + */ +#define LL_DMA2D_IT_CEIE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ +#define LL_DMA2D_IT_CTCIE DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */ +#define LL_DMA2D_IT_CAEIE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */ +#define LL_DMA2D_IT_TWIE DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ +#define LL_DMA2D_IT_TCIE DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ +#define LL_DMA2D_IT_TEIE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_MODE Mode + * @{ + */ +#define LL_DMA2D_MODE_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */ +#define LL_DMA2D_MODE_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */ +#define LL_DMA2D_MODE_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */ +#define LL_DMA2D_MODE_R2M (DMA2D_CR_MODE_0|DMA2D_CR_MODE_1) /*!< DMA2D register to memory transfer mode */ +#define LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_FG DMA2D_CR_MODE_2 /*!< DMA2D memory to memory with blending transfer mode and fixed color foreground */ +#define LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_BG (DMA2D_CR_MODE_0|DMA2D_CR_MODE_2) /*!< DMA2D memory to memory with blending transfer mode and fixed color background */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode + * @{ + */ +#define LL_DMA2D_OUTPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ +#define LL_DMA2D_OUTPUT_MODE_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 */ +#define LL_DMA2D_OUTPUT_MODE_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 */ +#define LL_DMA2D_OUTPUT_MODE_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */ +#define LL_DMA2D_OUTPUT_MODE_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode + * @{ + */ +#define LL_DMA2D_INPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ +#define LL_DMA2D_INPUT_MODE_RGB888 DMA2D_FGPFCCR_CM_0 /*!< RGB888 */ +#define LL_DMA2D_INPUT_MODE_RGB565 DMA2D_FGPFCCR_CM_1 /*!< RGB565 */ +#define LL_DMA2D_INPUT_MODE_ARGB1555 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1) /*!< ARGB1555 */ +#define LL_DMA2D_INPUT_MODE_ARGB4444 DMA2D_FGPFCCR_CM_2 /*!< ARGB4444 */ +#define LL_DMA2D_INPUT_MODE_L8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2) /*!< L8 */ +#define LL_DMA2D_INPUT_MODE_AL44 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL44 */ +#define LL_DMA2D_INPUT_MODE_AL88 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88 */ +#define LL_DMA2D_INPUT_MODE_L4 DMA2D_FGPFCCR_CM_3 /*!< L4 */ +#define LL_DMA2D_INPUT_MODE_A8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3) /*!< A8 */ +#define LL_DMA2D_INPUT_MODE_A4 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< A4 */ +#define LL_DMA2D_INPUT_MODE_YCBCR (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< YCbCr */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode + * @{ + */ +#define LL_DMA2D_ALPHA_MODE_NO_MODIF 0x00000000U /*!< No modification of the alpha channel value */ +#define LL_DMA2D_ALPHA_MODE_REPLACE DMA2D_FGPFCCR_AM_0 /*!< Replace original alpha channel value by + programmed alpha value */ +#define LL_DMA2D_ALPHA_MODE_COMBINE DMA2D_FGPFCCR_AM_1 /*!< Replace original alpha channel value by + programmed alpha value with, + original alpha channel value */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_OUTPUT_SWAP_MODE Swap Mode + * @{ + */ +#define LL_DMA2D_SWAP_MODE_REGULAR 0x00000000U /*!< Regular order */ +#define LL_DMA2D_SWAP_MODE_TWO_BY_TWO DMA2D_OPFCCR_SB /*!< Bytes swapped two by two */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_RED_BLUE_SWAP Red Blue Swap + * @{ + */ +#define LL_DMA2D_RB_MODE_REGULAR 0x00000000U /*!< RGB or ARGB */ +#define LL_DMA2D_RB_MODE_SWAP DMA2D_FGPFCCR_RBS /*!< BGR or ABGR */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_ALPHA_INVERSION Alpha Inversion + * @{ + */ +#define LL_DMA2D_ALPHA_REGULAR 0x00000000U /*!< Regular alpha */ +#define LL_DMA2D_ALPHA_INVERTED DMA2D_FGPFCCR_AI /*!< Inverted alpha */ +/** + * @} + */ + + +/** @defgroup DMA2D_LL_EC_LINE_OFFSET_MODE Line Offset Mode + * @{ + */ +#define LL_DMA2D_LINE_OFFSET_PIXELS 0x00000000U /*!< Line offsets are expressed in pixels */ +#define LL_DMA2D_LINE_OFFSET_BYTES DMA2D_CR_LOM /*!< Line offsets are expressed in bytes */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode + * @{ + */ +#define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */ +#define LL_DMA2D_CLUT_COLOR_MODE_RGB888 DMA2D_FGPFCCR_CCM /*!< RGB888 */ +/** + * @} + */ + +/** @defgroup DMA2D_LL_CHROMA_SUB_SAMPLING Chroma Sub Sampling + * @{ + */ +#define LL_DMA2D_CSS_444 0x00000000U /*!< No chroma sub-sampling 4:4:4 */ +#define LL_DMA2D_CSS_422 DMA2D_FGPFCCR_CSS_0 /*!< chroma sub-sampling 4:2:2 */ +#define LL_DMA2D_CSS_420 DMA2D_FGPFCCR_CSS_1 /*!< chroma sub-sampling 4:2:0 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros + * @{ + */ + +/** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in DMA2D register. + * @param __INSTANCE__ DMA2D Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA2D register. + * @param __INSTANCE__ DMA2D Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions + * @{ + */ + +/** @defgroup DMA2D_LL_EF_Configuration Configuration Functions + * @{ + */ + +/** + * @brief Start a DMA2D transfer. + * @rmtoll CR START LL_DMA2D_Start + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_START); +} + +/** + * @brief Indicate if a DMA2D transfer is ongoing. + * @rmtoll CR START LL_DMA2D_IsTransferOngoing + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START)) ? 1UL : 0UL); +} + +/** + * @brief Suspend DMA2D transfer. + * @note This API can be used to suspend automatic foreground or background CLUT loading. + * @rmtoll CR SUSP LL_DMA2D_Suspend + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx) +{ + MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); +} + +/** + * @brief Resume DMA2D transfer. + * @note This API can be used to resume automatic foreground or background CLUT loading. + * @rmtoll CR SUSP LL_DMA2D_Resume + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START); +} + +/** + * @brief Indicate if DMA2D transfer is suspended. + * @note This API can be used to indicate whether or not automatic foreground or + * background CLUT loading is suspended. + * @rmtoll CR SUSP LL_DMA2D_IsSuspended + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP)) ? 1UL : 0UL); +} + +/** + * @brief Abort DMA2D transfer. + * @note This API can be used to abort automatic foreground or background CLUT loading. + * @rmtoll CR ABORT LL_DMA2D_Abort + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx) +{ + MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); +} + +/** + * @brief Indicate if DMA2D transfer is aborted. + * @note This API can be used to indicate whether or not automatic foreground or + * background CLUT loading is aborted. + * @rmtoll CR ABORT LL_DMA2D_IsAborted + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsAborted(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT)) ? 1UL : 0UL); +} + +/** + * @brief Set DMA2D mode. + * @rmtoll CR MODE LL_DMA2D_SetMode + * @param DMA2Dx DMA2D Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_MODE_M2M + * @arg @ref LL_DMA2D_MODE_M2M_PFC + * @arg @ref LL_DMA2D_MODE_M2M_BLEND + * @arg @ref LL_DMA2D_MODE_R2M + * @arg @ref LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_FG + * @arg @ref LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_BG + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode) +{ + MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode); +} + +/** + * @brief Return DMA2D mode + * @rmtoll CR MODE LL_DMA2D_GetMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_MODE_M2M + * @arg @ref LL_DMA2D_MODE_M2M_PFC + * @arg @ref LL_DMA2D_MODE_M2M_BLEND + * @arg @ref LL_DMA2D_MODE_R2M + * @arg @ref LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_FG + * @arg @ref LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_BG + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE)); +} + +/** + * @brief Set DMA2D output color mode. + * @rmtoll OPFCCR CM LL_DMA2D_SetOutputColorMode + * @param DMA2Dx DMA2D Instance + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode); +} + +/** + * @brief Return DMA2D output color mode. + * @rmtoll OPFCCR CM LL_DMA2D_GetOutputColorMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM)); +} + +/** + * @brief Set DMA2D output Red Blue swap mode. + * @rmtoll OPFCCR RBS LL_DMA2D_SetOutputRBSwapMode + * @param DMA2Dx DMA2D Instance + * @param RBSwapMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputRBSwapMode(DMA2D_TypeDef *DMA2Dx, uint32_t RBSwapMode) +{ + MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_RBS, RBSwapMode); +} + +/** + * @brief Return DMA2D output Red Blue swap mode. + * @rmtoll OPFCCR RBS LL_DMA2D_GetOutputRBSwapMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputRBSwapMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_RBS)); +} + +/** + * @brief Set DMA2D output alpha inversion mode. + * @rmtoll OPFCCR AI LL_DMA2D_SetOutputAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @param AlphaInversionMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputAlphaInvMode(DMA2D_TypeDef *DMA2Dx, uint32_t AlphaInversionMode) +{ + MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_AI, AlphaInversionMode); +} + +/** + * @brief Return DMA2D output alpha inversion mode. + * @rmtoll OPFCCR AI LL_DMA2D_GetOutputAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputAlphaInvMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_AI)); +} + + +/** + * @brief Set DMA2D output swap mode. + * @rmtoll OPFCCR SB LL_DMA2D_SetOutputSwapMode + * @param DMA2Dx DMA2D Instance + * @param OutputSwapMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_SWAP_MODE_REGULAR + * @arg @ref LL_DMA2D_SWAP_MODE_TWO_BY_TWO + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputSwapMode(DMA2D_TypeDef *DMA2Dx, uint32_t OutputSwapMode) +{ + MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_SB, OutputSwapMode); +} + +/** + * @brief Return DMA2D output swap mode. + * @rmtoll OPFCCR SB LL_DMA2D_GetOutputSwapMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_SWAP_MODE_REGULAR + * @arg @ref LL_DMA2D_SWAP_MODE_TWO_BY_TWO + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputSwapMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_SB)); +} + +/** + * @brief Set DMA2D line offset mode. + * @rmtoll CR LOM LL_DMA2D_SetLineOffsetMode + * @param DMA2Dx DMA2D Instance + * @param LineOffsetMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_LINE_OFFSET_PIXELS + * @arg @ref LL_DMA2D_LINE_OFFSET_BYTES + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetLineOffsetMode(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffsetMode) +{ + MODIFY_REG(DMA2Dx->CR, DMA2D_CR_LOM, LineOffsetMode); +} + +/** + * @brief Return DMA2D line offset mode. + * @rmtoll CR LOM LL_DMA2D_GetLineOffsetMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_LINE_OFFSET_PIXELS + * @arg @ref LL_DMA2D_LINE_OFFSET_BYTES + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetLineOffsetMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_LOM)); +} + +/** + * @brief Set DMA2D line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll OOR LO LL_DMA2D_SetLineOffset + * @param DMA2Dx DMA2D Instance + * @param LineOffset Value between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) +{ + MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset); +} + +/** + * @brief Return DMA2D line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll OOR LO LL_DMA2D_GetLineOffset + * @param DMA2Dx DMA2D Instance + * @retval Line offset value between Min_Data=0 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO)); +} + +/** + * @brief Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits). + * @rmtoll NLR PL LL_DMA2D_SetNbrOfPixelsPerLines + * @param DMA2Dx DMA2D Instance + * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines) +{ + MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos)); +} + +/** + * @brief Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits) + * @rmtoll NLR PL LL_DMA2D_GetNbrOfPixelsPerLines + * @param DMA2Dx DMA2D Instance + * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos); +} + +/** + * @brief Set DMA2D number of lines, expressed on 16 bits ([15:0] bits). + * @rmtoll NLR NL LL_DMA2D_SetNbrOfLines + * @param DMA2Dx DMA2D Instance + * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines) +{ + MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines); +} + +/** + * @brief Return DMA2D number of lines, expressed on 16 bits ([15:0] bits). + * @rmtoll NLR NL LL_DMA2D_GetNbrOfLines + * @param DMA2Dx DMA2D Instance + * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL)); +} + +/** + * @brief Set DMA2D output memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll OMAR MA LL_DMA2D_SetOutputMemAddr + * @param DMA2Dx DMA2D Instance + * @param OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress) +{ + LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress); +} + +/** + * @brief Get DMA2D output memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll OMAR MA LL_DMA2D_GetOutputMemAddr + * @param DMA2Dx DMA2D Instance + * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR)); +} + +/** + * @brief Set DMA2D output color, expressed on 32 bits ([31:0] bits). + * @note Output color format depends on output color mode, ARGB8888, RGB888, + * RGB565, ARGB1555 or ARGB4444. + * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting + * with respect to color mode is not done by the user code. + * @rmtoll OCOLR BLUE LL_DMA2D_SetOutputColor\n + * OCOLR GREEN LL_DMA2D_SetOutputColor\n + * OCOLR RED LL_DMA2D_SetOutputColor\n + * OCOLR ALPHA LL_DMA2D_SetOutputColor + * @param DMA2Dx DMA2D Instance + * @param OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor) +{ + MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \ + OutputColor); +} + +/** + * @brief Get DMA2D output color, expressed on 32 bits ([31:0] bits). + * @note Alpha channel and red, green, blue color values must be retrieved from the returned + * value based on the output color mode (ARGB8888, RGB888, RGB565, ARGB1555 or ARGB4444) + * as set by @ref LL_DMA2D_SetOutputColorMode. + * @rmtoll OCOLR BLUE LL_DMA2D_GetOutputColor\n + * OCOLR GREEN LL_DMA2D_GetOutputColor\n + * OCOLR RED LL_DMA2D_GetOutputColor\n + * OCOLR ALPHA LL_DMA2D_GetOutputColor + * @param DMA2Dx DMA2D Instance + * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \ + (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1))); +} + +/** + * @brief Set DMA2D line watermark, expressed on 16 bits ([15:0] bits). + * @rmtoll LWR LW LL_DMA2D_SetLineWatermark + * @param DMA2Dx DMA2D Instance + * @param LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark) +{ + MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark); +} + +/** + * @brief Return DMA2D line watermark, expressed on 16 bits ([15:0] bits). + * @rmtoll LWR LW LL_DMA2D_GetLineWatermark + * @param DMA2Dx DMA2D Instance + * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW)); +} + +/** + * @brief Set DMA2D dead time, expressed on 8 bits ([7:0] bits). + * @rmtoll AMTCR DT LL_DMA2D_SetDeadTime + * @param DMA2Dx DMA2D Instance + * @param DeadTime Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime) +{ + MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos)); +} + +/** + * @brief Return DMA2D dead time, expressed on 8 bits ([7:0] bits). + * @rmtoll AMTCR DT LL_DMA2D_GetDeadTime + * @param DMA2Dx DMA2D Instance + * @retval Dead time value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos); +} + +/** + * @brief Enable DMA2D dead time functionality. + * @rmtoll AMTCR EN LL_DMA2D_EnableDeadTime + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); +} + +/** + * @brief Disable DMA2D dead time functionality. + * @rmtoll AMTCR EN LL_DMA2D_DisableDeadTime + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN); +} + +/** + * @brief Indicate if DMA2D dead time functionality is enabled. + * @rmtoll AMTCR EN LL_DMA2D_IsEnabledDeadTime + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN)) ? 1UL : 0UL); +} + +/** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions + * @{ + */ + +/** + * @brief Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll FGMAR MA LL_DMA2D_FGND_SetMemAddr + * @param DMA2Dx DMA2D Instance + * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) +{ + LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress); +} + +/** + * @brief Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll FGMAR MA LL_DMA2D_FGND_GetMemAddr + * @param DMA2Dx DMA2D Instance + * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR)); +} + +/** + * @brief Enable DMA2D foreground CLUT loading. + * @rmtoll FGPFCCR START LL_DMA2D_FGND_EnableCLUTLoad + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START); +} + +/** + * @brief Indicate if DMA2D foreground CLUT loading is enabled. + * @rmtoll FGPFCCR START LL_DMA2D_FGND_IsEnabledCLUTLoad + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START)) ? 1UL : 0UL); +} + +/** + * @brief Set DMA2D foreground color mode. + * @rmtoll FGPFCCR CM LL_DMA2D_FGND_SetColorMode + * @param DMA2Dx DMA2D Instance + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 + * @arg @ref LL_DMA2D_INPUT_MODE_L8 + * @arg @ref LL_DMA2D_INPUT_MODE_AL44 + * @arg @ref LL_DMA2D_INPUT_MODE_AL88 + * @arg @ref LL_DMA2D_INPUT_MODE_L4 + * @arg @ref LL_DMA2D_INPUT_MODE_A8 + * @arg @ref LL_DMA2D_INPUT_MODE_A4 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode); +} + +/** + * @brief Return DMA2D foreground color mode. + * @rmtoll FGPFCCR CM LL_DMA2D_FGND_GetColorMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 + * @arg @ref LL_DMA2D_INPUT_MODE_L8 + * @arg @ref LL_DMA2D_INPUT_MODE_AL44 + * @arg @ref LL_DMA2D_INPUT_MODE_AL88 + * @arg @ref LL_DMA2D_INPUT_MODE_L4 + * @arg @ref LL_DMA2D_INPUT_MODE_A8 + * @arg @ref LL_DMA2D_INPUT_MODE_A4 + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM)); +} + +/** + * @brief Set DMA2D foreground alpha mode. + * @rmtoll FGPFCCR AM LL_DMA2D_FGND_SetAlphaMode + * @param DMA2Dx DMA2D Instance + * @param AphaMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF + * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE + * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode); +} + +/** + * @brief Return DMA2D foreground alpha mode. + * @rmtoll FGPFCCR AM LL_DMA2D_FGND_GetAlphaMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF + * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE + * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM)); +} + +/** + * @brief Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_SetAlpha + * @param DMA2Dx DMA2D Instance + * @param Alpha Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos)); +} + +/** + * @brief Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_GetAlpha + * @param DMA2Dx DMA2D Instance + * @retval Alpha value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos); +} + +/** + * @brief Set DMA2D foreground Red Blue swap mode. + * @rmtoll FGPFCCR RBS LL_DMA2D_FGND_SetRBSwapMode + * @param DMA2Dx DMA2D Instance + * @param RBSwapMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetRBSwapMode(DMA2D_TypeDef *DMA2Dx, uint32_t RBSwapMode) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_RBS, RBSwapMode); +} + +/** + * @brief Return DMA2D foreground Red Blue swap mode. + * @rmtoll FGPFCCR RBS LL_DMA2D_FGND_GetRBSwapMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRBSwapMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_RBS)); +} + +/** + * @brief Set DMA2D foreground alpha inversion mode. + * @rmtoll FGPFCCR AI LL_DMA2D_FGND_SetAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @param AlphaInversionMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetAlphaInvMode(DMA2D_TypeDef *DMA2Dx, uint32_t AlphaInversionMode) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AI, AlphaInversionMode); +} + +/** + * @brief Return DMA2D foreground alpha inversion mode. + * @rmtoll FGPFCCR AI LL_DMA2D_FGND_GetAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaInvMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AI)); +} + +/** + * @brief Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll FGOR LO LL_DMA2D_FGND_SetLineOffset + * @param DMA2Dx DMA2D Instance + * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) +{ + MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset); +} + +/** + * @brief Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll FGOR LO LL_DMA2D_FGND_GetLineOffset + * @param DMA2Dx DMA2D Instance + * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO)); +} + +/** + * @brief Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits). + * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetColor + * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetColor + * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetColor + * @param DMA2Dx DMA2D Instance + * @param Red Value between Min_Data=0 and Max_Data=0xFF + * @param Green Value between Min_Data=0 and Max_Data=0xFF + * @param Blue Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) +{ + MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \ + ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue)); +} + +/** + * @brief Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetRedColor + * @param DMA2Dx DMA2D Instance + * @param Red Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) +{ + MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos)); +} + +/** + * @brief Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR RED LL_DMA2D_FGND_GetRedColor + * @param DMA2Dx DMA2D Instance + * @retval Red color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos); +} + +/** + * @brief Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetGreenColor + * @param DMA2Dx DMA2D Instance + * @param Green Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) +{ + MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos)); +} + +/** + * @brief Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_GetGreenColor + * @param DMA2Dx DMA2D Instance + * @retval Green color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos); +} + +/** + * @brief Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetBlueColor + * @param DMA2Dx DMA2D Instance + * @param Blue Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) +{ + MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue); +} + +/** + * @brief Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits). + * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_GetBlueColor + * @param DMA2Dx DMA2D Instance + * @retval Blue color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE)); +} + +/** + * @brief Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll FGCMAR MA LL_DMA2D_FGND_SetCLUTMemAddr + * @param DMA2Dx DMA2D Instance + * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) +{ + LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress); +} + +/** + * @brief Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll FGCMAR MA LL_DMA2D_FGND_GetCLUTMemAddr + * @param DMA2Dx DMA2D Instance + * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR)); +} + +/** + * @brief Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). + * @rmtoll FGPFCCR CS LL_DMA2D_FGND_SetCLUTSize + * @param DMA2Dx DMA2D Instance + * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos)); +} + +/** + * @brief Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits). + * @rmtoll FGPFCCR CS LL_DMA2D_FGND_GetCLUTSize + * @param DMA2Dx DMA2D Instance + * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos); +} + +/** + * @brief Set DMA2D foreground CLUT color mode. + * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_SetCLUTColorMode + * @param DMA2Dx DMA2D Instance + * @param CLUTColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode); +} + +/** + * @brief Return DMA2D foreground CLUT color mode. + * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_GetCLUTColorMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM)); +} + +/** + * @brief Set DMA2D foreground Chroma Sub Sampling (for YCbCr input color mode). + * @rmtoll FGPFCCR CSS LL_DMA2D_FGND_SetChrSubSampling + * @param DMA2Dx DMA2D Instance + * @param ChromaSubSampling This parameter can be one of the following values: + * @arg @ref LL_DMA2D_CSS_444 + * @arg @ref LL_DMA2D_CSS_422 + * @arg @ref LL_DMA2D_CSS_420 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_FGND_SetChrSubSampling(DMA2D_TypeDef *DMA2Dx, uint32_t ChromaSubSampling) +{ + MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CSS, ChromaSubSampling); +} + +/** + * @brief Return DMA2D foreground Chroma Sub Sampling (for YCbCr input color mode). + * @rmtoll FGPFCCR CSS LL_DMA2D_FGND_GetChrSubSampling + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_CSS_444 + * @arg @ref LL_DMA2D_CSS_422 + * @arg @ref LL_DMA2D_CSS_420 + */ +__STATIC_INLINE uint32_t LL_DMA2D_FGND_GetChrSubSampling(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CSS)); +} +/** + * @} + */ + +/** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions + * @{ + */ + +/** + * @brief Set DMA2D background memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll BGMAR MA LL_DMA2D_BGND_SetMemAddr + * @param DMA2Dx DMA2D Instance + * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress) +{ + LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress); +} + +/** + * @brief Get DMA2D background memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll BGMAR MA LL_DMA2D_BGND_GetMemAddr + * @param DMA2Dx DMA2D Instance + * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR)); +} + +/** + * @brief Enable DMA2D background CLUT loading. + * @rmtoll BGPFCCR START LL_DMA2D_BGND_EnableCLUTLoad + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START); +} + +/** + * @brief Indicate if DMA2D background CLUT loading is enabled. + * @rmtoll BGPFCCR START LL_DMA2D_BGND_IsEnabledCLUTLoad + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START)) ? 1UL : 0UL); +} + +/** + * @brief Set DMA2D background color mode. + * @rmtoll BGPFCCR CM LL_DMA2D_BGND_SetColorMode + * @param DMA2Dx DMA2D Instance + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 + * @arg @ref LL_DMA2D_INPUT_MODE_L8 + * @arg @ref LL_DMA2D_INPUT_MODE_AL44 + * @arg @ref LL_DMA2D_INPUT_MODE_AL88 + * @arg @ref LL_DMA2D_INPUT_MODE_L4 + * @arg @ref LL_DMA2D_INPUT_MODE_A8 + * @arg @ref LL_DMA2D_INPUT_MODE_A4 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode); +} + +/** + * @brief Return DMA2D background color mode. + * @rmtoll BGPFCCR CM LL_DMA2D_BGND_GetColorMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_INPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444 + * @arg @ref LL_DMA2D_INPUT_MODE_L8 + * @arg @ref LL_DMA2D_INPUT_MODE_AL44 + * @arg @ref LL_DMA2D_INPUT_MODE_AL88 + * @arg @ref LL_DMA2D_INPUT_MODE_L4 + * @arg @ref LL_DMA2D_INPUT_MODE_A8 + * @arg @ref LL_DMA2D_INPUT_MODE_A4 + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetColorMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM)); +} + +/** + * @brief Set DMA2D background alpha mode. + * @rmtoll BGPFCCR AM LL_DMA2D_BGND_SetAlphaMode + * @param DMA2Dx DMA2D Instance + * @param AphaMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF + * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE + * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode); +} + +/** + * @brief Return DMA2D background alpha mode. + * @rmtoll BGPFCCR AM LL_DMA2D_BGND_GetAlphaMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF + * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE + * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM)); +} + +/** + * @brief Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_SetAlpha + * @param DMA2Dx DMA2D Instance + * @param Alpha Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos)); +} + +/** + * @brief Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_GetAlpha + * @param DMA2Dx DMA2D Instance + * @retval Alpha value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlpha(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos); +} + +/** + * @brief Set DMA2D background Red Blue swap mode. + * @rmtoll BGPFCCR RBS LL_DMA2D_BGND_SetRBSwapMode + * @param DMA2Dx DMA2D Instance + * @param RBSwapMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetRBSwapMode(DMA2D_TypeDef *DMA2Dx, uint32_t RBSwapMode) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_RBS, RBSwapMode); +} + +/** + * @brief Return DMA2D background Red Blue swap mode. + * @rmtoll BGPFCCR RBS LL_DMA2D_BGND_GetRBSwapMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_RB_MODE_REGULAR + * @arg @ref LL_DMA2D_RB_MODE_SWAP + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRBSwapMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_RBS)); +} + +/** + * @brief Set DMA2D background alpha inversion mode. + * @rmtoll BGPFCCR AI LL_DMA2D_BGND_SetAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @param AlphaInversionMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetAlphaInvMode(DMA2D_TypeDef *DMA2Dx, uint32_t AlphaInversionMode) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AI, AlphaInversionMode); +} + +/** + * @brief Return DMA2D background alpha inversion mode. + * @rmtoll BGPFCCR AI LL_DMA2D_BGND_GetAlphaInvMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_ALPHA_REGULAR + * @arg @ref LL_DMA2D_ALPHA_INVERTED + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaInvMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AI)); +} + +/** + * @brief Set DMA2D background line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll BGOR LO LL_DMA2D_BGND_SetLineOffset + * @param DMA2Dx DMA2D Instance + * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset) +{ + MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset); +} + +/** + * @brief Return DMA2D background line offset, expressed on 14 bits ([13:0] bits). + * @rmtoll BGOR LO LL_DMA2D_BGND_GetLineOffset + * @param DMA2Dx DMA2D Instance + * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetLineOffset(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO)); +} + +/** + * @brief Set DMA2D background color values, expressed on 24 bits ([23:0] bits). + * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetColor + * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetColor + * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetColor + * @param DMA2Dx DMA2D Instance + * @param Red Value between Min_Data=0 and Max_Data=0xFF + * @param Green Value between Min_Data=0 and Max_Data=0xFF + * @param Blue Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue) +{ + MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \ + ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue)); +} + +/** + * @brief Set DMA2D background red color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetRedColor + * @param DMA2Dx DMA2D Instance + * @param Red Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red) +{ + MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos)); +} + +/** + * @brief Return DMA2D background red color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR RED LL_DMA2D_BGND_GetRedColor + * @param DMA2Dx DMA2D Instance + * @retval Red color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRedColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos); +} + +/** + * @brief Set DMA2D background green color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetGreenColor + * @param DMA2Dx DMA2D Instance + * @param Green Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green) +{ + MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos)); +} + +/** + * @brief Return DMA2D background green color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_GetGreenColor + * @param DMA2Dx DMA2D Instance + * @retval Green color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetGreenColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos); +} + +/** + * @brief Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetBlueColor + * @param DMA2Dx DMA2D Instance + * @param Blue Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue) +{ + MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue); +} + +/** + * @brief Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits). + * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_GetBlueColor + * @param DMA2Dx DMA2D Instance + * @retval Blue color value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetBlueColor(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE)); +} + +/** + * @brief Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll BGCMAR MA LL_DMA2D_BGND_SetCLUTMemAddr + * @param DMA2Dx DMA2D Instance + * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress) +{ + LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress); +} + +/** + * @brief Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits). + * @rmtoll BGCMAR MA LL_DMA2D_BGND_GetCLUTMemAddr + * @param DMA2Dx DMA2D Instance + * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTMemAddr(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR)); +} + +/** + * @brief Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). + * @rmtoll BGPFCCR CS LL_DMA2D_BGND_SetCLUTSize + * @param DMA2Dx DMA2D Instance + * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos)); +} + +/** + * @brief Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits). + * @rmtoll BGPFCCR CS LL_DMA2D_BGND_GetCLUTSize + * @param DMA2Dx DMA2D Instance + * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTSize(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos); +} + +/** + * @brief Set DMA2D background CLUT color mode. + * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_SetCLUTColorMode + * @param DMA2Dx DMA2D Instance + * @param CLUTColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode) +{ + MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode); +} + +/** + * @brief Return DMA2D background CLUT color mode. + * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_GetCLUTColorMode + * @param DMA2Dx DMA2D Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 + * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888 + */ +__STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTColorMode(const DMA2D_TypeDef *DMA2Dx) +{ + return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM)); +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management + * @{ + */ + +/** + * @brief Check if the DMA2D Configuration Error Interrupt Flag is set or not + * @rmtoll ISR CEIF LL_DMA2D_IsActiveFlag_CE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not + * @rmtoll ISR CTCIF LL_DMA2D_IsActiveFlag_CTC + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D CLUT Access Error Interrupt Flag is set or not + * @rmtoll ISR CAEIF LL_DMA2D_IsActiveFlag_CAE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Watermark Interrupt Flag is set or not + * @rmtoll ISR TWIF LL_DMA2D_IsActiveFlag_TW + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Complete Interrupt Flag is set or not + * @rmtoll ISR TCIF LL_DMA2D_IsActiveFlag_TC + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Error Interrupt Flag is set or not + * @rmtoll ISR TEIF LL_DMA2D_IsActiveFlag_TE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear DMA2D Configuration Error Interrupt Flag + * @rmtoll IFCR CCEIF LL_DMA2D_ClearFlag_CE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF); +} + +/** + * @brief Clear DMA2D CLUT Transfer Complete Interrupt Flag + * @rmtoll IFCR CCTCIF LL_DMA2D_ClearFlag_CTC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF); +} + +/** + * @brief Clear DMA2D CLUT Access Error Interrupt Flag + * @rmtoll IFCR CAECIF LL_DMA2D_ClearFlag_CAE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF); +} + +/** + * @brief Clear DMA2D Transfer Watermark Interrupt Flag + * @rmtoll IFCR CTWIF LL_DMA2D_ClearFlag_TW + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF); +} + +/** + * @brief Clear DMA2D Transfer Complete Interrupt Flag + * @rmtoll IFCR CTCIF LL_DMA2D_ClearFlag_TC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF); +} + +/** + * @brief Clear DMA2D Transfer Error Interrupt Flag + * @rmtoll IFCR CTEIF LL_DMA2D_ClearFlag_TE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx) +{ + WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF); +} + +/** + * @} + */ + +/** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management + * @{ + */ + +/** + * @brief Enable Configuration Error Interrupt + * @rmtoll CR CEIE LL_DMA2D_EnableIT_CE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); +} + +/** + * @brief Enable CLUT Transfer Complete Interrupt + * @rmtoll CR CTCIE LL_DMA2D_EnableIT_CTC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); +} + +/** + * @brief Enable CLUT Access Error Interrupt + * @rmtoll CR CAEIE LL_DMA2D_EnableIT_CAE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); +} + +/** + * @brief Enable Transfer Watermark Interrupt + * @rmtoll CR TWIE LL_DMA2D_EnableIT_TW + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); +} + +/** + * @brief Enable Transfer Complete Interrupt + * @rmtoll CR TCIE LL_DMA2D_EnableIT_TC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); +} + +/** + * @brief Enable Transfer Error Interrupt + * @rmtoll CR TEIE LL_DMA2D_EnableIT_TE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx) +{ + SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); +} + +/** + * @brief Disable Configuration Error Interrupt + * @rmtoll CR CEIE LL_DMA2D_DisableIT_CE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE); +} + +/** + * @brief Disable CLUT Transfer Complete Interrupt + * @rmtoll CR CTCIE LL_DMA2D_DisableIT_CTC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE); +} + +/** + * @brief Disable CLUT Access Error Interrupt + * @rmtoll CR CAEIE LL_DMA2D_DisableIT_CAE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE); +} + +/** + * @brief Disable Transfer Watermark Interrupt + * @rmtoll CR TWIE LL_DMA2D_DisableIT_TW + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE); +} + +/** + * @brief Disable Transfer Complete Interrupt + * @rmtoll CR TCIE LL_DMA2D_DisableIT_TC + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE); +} + +/** + * @brief Disable Transfer Error Interrupt + * @rmtoll CR TEIE LL_DMA2D_DisableIT_TE + * @param DMA2Dx DMA2D Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx) +{ + CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE); +} + +/** + * @brief Check if the DMA2D Configuration Error interrupt source is enabled or disabled. + * @rmtoll CR CEIE LL_DMA2D_IsEnabledIT_CE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled. + * @rmtoll CR CTCIE LL_DMA2D_IsEnabledIT_CTC + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled. + * @rmtoll CR CAEIE LL_DMA2D_IsEnabledIT_CAE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled. + * @rmtoll CR TWIE LL_DMA2D_IsEnabledIT_TW + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Complete interrupt source is enabled or disabled. + * @rmtoll CR TCIE LL_DMA2D_IsEnabledIT_TC + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the DMA2D Transfer Error interrupt source is enabled or disabled. + * @rmtoll CR TEIE LL_DMA2D_IsEnabledIT_TE + * @param DMA2Dx DMA2D Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(const DMA2D_TypeDef *DMA2Dx) +{ + return ((READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE)) ? 1UL : 0UL); +} + + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions + * @{ + */ + +ErrorStatus LL_DMA2D_DeInit(const DMA2D_TypeDef *DMA2Dx); +ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct); +void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct); +void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx); +void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg); +void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct); +uint32_t LL_DMA2D_GetOutputBlueColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); +uint32_t LL_DMA2D_GetOutputGreenColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); +uint32_t LL_DMA2D_GetOutputRedColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); +uint32_t LL_DMA2D_GetOutputAlphaColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode); +void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (DMA2D) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_DMA2D_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_exti.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_exti.h new file mode 100644 index 000000000..a82e14e12 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_exti.h @@ -0,0 +1,1505 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_EXTI_H +#define STM32H7RSxx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +#define LL_EXTI_REGISTER_PINPOS_SHFT 16U /*!< Define used to shift pin position in EXTICR register */ + +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_64_95; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 64 to 95 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#define LL_EXTI_LINE_ALL_0_31 (LL_EXTI_LINE_0 |LL_EXTI_LINE_1 | LL_EXTI_LINE_2 | LL_EXTI_LINE_3 | \ + LL_EXTI_LINE_4 | LL_EXTI_LINE_5 | LL_EXTI_LINE_6 | LL_EXTI_LINE_7 | \ + LL_EXTI_LINE_8 | LL_EXTI_LINE_9 | LL_EXTI_LINE_10 | LL_EXTI_LINE_11 | \ + LL_EXTI_LINE_12 | LL_EXTI_LINE_13 | LL_EXTI_LINE_14 | LL_EXTI_LINE_15 | \ + LL_EXTI_LINE_16 | LL_EXTI_LINE_17 | LL_EXTI_LINE_18 | LL_EXTI_LINE_19 | \ + LL_EXTI_LINE_20 | LL_EXTI_LINE_21 | LL_EXTI_LINE_22 | LL_EXTI_LINE_23 | \ + LL_EXTI_LINE_24 | LL_EXTI_LINE_25 | LL_EXTI_LINE_26 | LL_EXTI_LINE_27 | \ + LL_EXTI_LINE_28 | LL_EXTI_LINE_29 | LL_EXTI_LINE_30 | LL_EXTI_LINE_31) +/*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */ +#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */ +#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */ +#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */ +#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */ +#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */ +#define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */ +#define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */ +#define LL_EXTI_LINE_45 EXTI_IMR2_IM45 /*!< Extended line 45 */ +#define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */ +#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */ +#define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */ +#define LL_EXTI_LINE_49 EXTI_IMR2_IM49 /*!< Extended line 49 */ +#define LL_EXTI_LINE_50 EXTI_IMR2_IM50 /*!< Extended line 50 */ +#define LL_EXTI_LINE_51 EXTI_IMR2_IM51 /*!< Extended line 51 */ +#define LL_EXTI_LINE_52 EXTI_IMR2_IM52 /*!< Extended line 52 */ +#define LL_EXTI_LINE_53 EXTI_IMR2_IM53 /*!< Extended line 53 */ +#define LL_EXTI_LINE_54 EXTI_IMR2_IM54 /*!< Extended line 54 */ +#define LL_EXTI_LINE_55 EXTI_IMR2_IM55 /*!< Extended line 55 */ +#define LL_EXTI_LINE_56 EXTI_IMR2_IM56 /*!< Extended line 56 */ +#define LL_EXTI_LINE_57 EXTI_IMR2_IM57 /*!< Extended line 57 */ +#define LL_EXTI_LINE_58 EXTI_IMR2_IM58 /*!< Extended line 58 */ +#define LL_EXTI_LINE_59 EXTI_IMR2_IM59 /*!< Extended line 59 */ +#define LL_EXTI_LINE_ALL_32_63 (LL_EXTI_LINE_32 | LL_EXTI_LINE_33 | LL_EXTI_LINE_34 | LL_EXTI_LINE_35 | \ + LL_EXTI_LINE_36 | LL_EXTI_LINE_37 | LL_EXTI_LINE_38 | LL_EXTI_LINE_39 | \ + LL_EXTI_LINE_40 | LL_EXTI_LINE_41 | LL_EXTI_LINE_42 | LL_EXTI_LINE_43 | \ + LL_EXTI_LINE_44 | LL_EXTI_LINE_45 | LL_EXTI_LINE_46 | LL_EXTI_LINE_47 | \ + LL_EXTI_LINE_48 | LL_EXTI_LINE_49 | LL_EXTI_LINE_50 | LL_EXTI_LINE_51 | \ + LL_EXTI_LINE_52 | LL_EXTI_LINE_53 | LL_EXTI_LINE_54 | LL_EXTI_LINE_55 | \ + LL_EXTI_LINE_56 | LL_EXTI_LINE_57 | LL_EXTI_LINE_58 | LL_EXTI_LINE_59) +/*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_77 EXTI_IMR3_IM77 /*!< Extended line 77 */ +#define LL_EXTI_LINE_ALL_64_95 LL_EXTI_LINE_77 /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95 + * @note The reset value for the direct lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR3 IMx LL_EXTI_EnableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 + * @note The reset value for the the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR3 IMx LL_EXTI_DisableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR3, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @note The reset value for the the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95 + * @note The reset value for the direct lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR3 IMx LL_EXTI_IsEnabledIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR3, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); + +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_EnableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_DisableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); + +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_IsEnabledEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR3, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR1, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR1 + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR2 + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine)); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine)); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_54 + * @retval Please check each device line mapping for EXTI Line availability + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR2, ExtiLine); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +ErrorStatus LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_EXTI_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_fmc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_fmc.h new file mode 100644 index 000000000..312608589 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_fmc.h @@ -0,0 +1,1162 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_fmc.h + * @author MCD Application Team + * @brief Header file of FMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_FMC_H +#define STM32H7RSxx_LL_FMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup FMC_LL + * @{ + */ + +/** @addtogroup FMC_LL_Private_Macros + * @{ + */ + +#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \ + ((__BANK__) == FMC_NORSRAM_BANK2) || \ + ((__BANK__) == FMC_NORSRAM_BANK3) || \ + ((__BANK__) == FMC_NORSRAM_BANK4)) +#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \ + ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE)) +#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \ + ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \ + ((__MEMORY__) == FMC_MEMORY_TYPE_NOR)) +#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32)) +#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \ + ((__SIZE__) == FMC_PAGE_SIZE_128) || \ + ((__SIZE__) == FMC_PAGE_SIZE_256) || \ + ((__SIZE__) == FMC_PAGE_SIZE_512) || \ + ((__SIZE__) == FMC_PAGE_SIZE_1024)) +#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \ + ((__FIFO__) == FMC_WRITE_FIFO_ENABLE)) +#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \ + ((__MODE__) == FMC_ACCESS_MODE_B) || \ + ((__MODE__) == FMC_ACCESS_MODE_C) || \ + ((__MODE__) == FMC_ACCESS_MODE_D)) +#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \ + ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE)) +#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \ + ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH)) +#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \ + ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) +#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \ + ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE)) +#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \ + ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE)) +#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \ + ((__MODE__) == FMC_EXTENDED_MODE_ENABLE)) +#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \ + ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE)) +#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U)) +#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \ + ((__BURST__) == FMC_WRITE_BURST_ENABLE)) +#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ + ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) +#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U)) +#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U)) +#define IS_FMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U) +#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U)) +#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE) +#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE) + + +#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3) +#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_WAIT_FEATURE_DISABLE) || \ + ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE)) +#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16)) +#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \ + ((__STATE__) == FMC_NAND_ECC_ENABLE)) + +#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE)) +#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE) + + +#define IS_FMC_SDMEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_32)) +#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \ + ((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE)) +#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE) || \ + ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \ + ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3)) +#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \ + ((__RBURST__) == FMC_SDRAM_RBURST_ENABLE)) +#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \ + ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \ + ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2)) +#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_PALL) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE)) +#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \ + ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \ + ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2)) +#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) +#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) +#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0U) && ((__NUMBER__) <= 15U)) +#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191U) +#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191U) +#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE) +#define IS_FMC_SDRAM_BANK(__BANK__) (((__BANK__) == FMC_SDRAM_BANK1) || \ + ((__BANK__) == FMC_SDRAM_BANK2)) +#define IS_FMC_COLUMNBITS_NUMBER(__COLUMN__) (((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_11)) +#define IS_FMC_ROWBITS_NUMBER(__ROW__) (((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_11) || \ + ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_12) || \ + ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_13)) +#define IS_FMC_INTERNALBANK_NUMBER(__NUMBER__) (((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \ + ((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_4)) +#define IS_FMC_CAS_LATENCY(__LATENCY__) (((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_1) || \ + ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_2) || \ + ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_3)) + + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup FMC_LL_Exported_typedef FMC Low Layer Exported Types + * @{ + */ + +#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef +#define FMC_NAND_TypeDef FMC_Bank3_TypeDef +#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef + +#define FMC_NORSRAM_DEVICE FMC_Bank1_R +#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E_R +#define FMC_NAND_DEVICE FMC_Bank3_R +#define FMC_SDRAM_DEVICE FMC_Bank5_6_R + +/** + * @brief FMC NORSRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. + This parameter can be a value of @ref FMC_NORSRAM_Bank */ + + uint32_t DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the data bus or not. + This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ + + uint32_t MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory device. + This parameter can be a value of @ref FMC_Memory_Type */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ + + uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FMC_Burst_Access_Mode */ + + uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ + + uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FMC_Wait_Timing */ + + uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC. + This parameter can be a value of @ref FMC_Write_Operation */ + + uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal */ + + uint32_t ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FMC_Extended_Mode */ + + uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FMC_AsynchronousWait */ + + uint32_t WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FMC_Write_Burst */ + + uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. + This parameter is only enabled through the FMC_BCR1 register, + and don't care through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Continous_Clock */ + + uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. + This parameter is only enabled through the FMC_BCR1 register, + and don't care through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Write_FIFO */ + + uint32_t PageSize; /*!< Specifies the memory page size. + This parameter can be a value of @ref FMC_Page_Size */ +} FMC_NORSRAM_InitTypeDef; + +/** + * @brief FMC NORSRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between Min_Data = 1 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between Min_Data = 1 and Max_Data = 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed + NOR Flash memories. */ + + uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of + HCLK cycles. This parameter can be a value between Min_Data = 2 and + Max_Data = 16. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM + accesses. */ + + uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between Min_Data = 2 and Max_Data = 17 + in NOR Flash memories with synchronous burst mode enable */ + + uint32_t AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FMC_Access_Mode */ +} FMC_NORSRAM_TimingTypeDef; + +/** + * @brief FMC NAND Configuration Structure definition + */ +typedef struct +{ + uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. + This parameter can be a value of @ref FMC_NAND_Bank */ + + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FMC_NAND_Data_Width */ + + uint32_t EccComputation; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FMC_ECC */ + + uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FMC_ECC_Page_Size */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ +} FMC_NAND_InitTypeDef; + +/** + * @brief FMC NAND Timing parameters structure definition + */ +typedef struct +{ + uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between Min_Data = 0 and Max_Data = 254 */ + + uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + data bus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ +} FMC_NAND_PCC_TimingTypeDef; + + +/** + * @brief FMC SDRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used. + This parameter can be a value of @ref FMC_SDRAM_Bank */ + + uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */ + + uint32_t RowBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */ + + uint32_t MemoryDataWidth; /*!< Defines the memory device width. + This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */ + + uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks. + This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */ + + uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. + This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */ + + uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode. + This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */ + + uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow + to disable the clock before changing frequency. + This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */ + + uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read + commands during the CAS latency and stores data in the Read FIFO. + This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */ + + uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. + This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */ +} FMC_SDRAM_InitTypeDef; + +/** + * @brief FMC SDRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and + an active or Refresh command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to + issuing the Activate command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock + cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command + and the delay between two consecutive Refresh commands in number of + memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command + in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write + command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ +} FMC_SDRAM_TimingTypeDef; + +/** + * @brief SDRAM command parameters structure definition + */ +typedef struct +{ + uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device. + This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */ + + uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to. + This parameter can be a value of @ref FMC_SDRAM_Command_Target. */ + + uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued + in auto refresh mode. + This parameter can be a value between Min_Data = 1 and Max_Data = 15 */ + + uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ +} FMC_SDRAM_CommandTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants + * @{ + */ + +/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller + * @{ + */ + +/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank + * @{ + */ +#define FMC_NORSRAM_BANK1 (0x00000000U) +#define FMC_NORSRAM_BANK2 (0x00000002U) +#define FMC_NORSRAM_BANK3 (0x00000004U) +#define FMC_NORSRAM_BANK4 (0x00000006U) +/** + * @} + */ + +/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing + * @{ + */ +#define FMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U) +#define FMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FMC_Memory_Type FMC Memory Type + * @{ + */ +#define FMC_MEMORY_TYPE_SRAM (0x00000000U) +#define FMC_MEMORY_TYPE_PSRAM (0x00000004U) +#define FMC_MEMORY_TYPE_NOR (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width + * @{ + */ +#define FMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U) +#define FMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access + * @{ + */ +#define FMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U) +#define FMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode + * @{ + */ +#define FMC_BURST_ACCESS_MODE_DISABLE (0x00000000U) +#define FMC_BURST_ACCESS_MODE_ENABLE (0x00000100U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity + * @{ + */ +#define FMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U) +#define FMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Timing FMC Wait Timing + * @{ + */ +#define FMC_WAIT_TIMING_BEFORE_WS (0x00000000U) +#define FMC_WAIT_TIMING_DURING_WS (0x00000800U) +/** + * @} + */ + +/** @defgroup FMC_Write_Operation FMC Write Operation + * @{ + */ +#define FMC_WRITE_OPERATION_DISABLE (0x00000000U) +#define FMC_WRITE_OPERATION_ENABLE (0x00001000U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal FMC Wait Signal + * @{ + */ +#define FMC_WAIT_SIGNAL_DISABLE (0x00000000U) +#define FMC_WAIT_SIGNAL_ENABLE (0x00002000U) +/** + * @} + */ + +/** @defgroup FMC_Extended_Mode FMC Extended Mode + * @{ + */ +#define FMC_EXTENDED_MODE_DISABLE (0x00000000U) +#define FMC_EXTENDED_MODE_ENABLE (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait + * @{ + */ +#define FMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U) +#define FMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U) +/** + * @} + */ + +/** @defgroup FMC_Page_Size FMC Page Size + * @{ + */ +#define FMC_PAGE_SIZE_NONE (0x00000000U) +#define FMC_PAGE_SIZE_128 FMC_BCRx_CPSIZE_0 +#define FMC_PAGE_SIZE_256 FMC_BCRx_CPSIZE_1 +#define FMC_PAGE_SIZE_512 (FMC_BCRx_CPSIZE_0\ + | FMC_BCRx_CPSIZE_1) +#define FMC_PAGE_SIZE_1024 FMC_BCRx_CPSIZE_2 +/** + * @} + */ + +/** @defgroup FMC_Write_Burst FMC Write Burst + * @{ + */ +#define FMC_WRITE_BURST_DISABLE (0x00000000U) +#define FMC_WRITE_BURST_ENABLE (0x00080000U) +/** + * @} + */ + +/** @defgroup FMC_Continous_Clock FMC Continuous Clock + * @{ + */ +#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U) +#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U) +/** + * @} + */ + +#if defined(FMC_BCR1_WFDIS) +/** @defgroup FMC_Write_FIFO FMC Write FIFO + * @{ + */ +#define FMC_WRITE_FIFO_DISABLE FMC_BCR1_WFDIS +#define FMC_WRITE_FIFO_ENABLE (0x00000000U) +#endif /* FMC_BCR1_WFDIS */ +/** + * @} + */ + +/** @defgroup FMC_Access_Mode FMC Access Mode + * @{ + */ +#define FMC_ACCESS_MODE_A (0x00000000U) +#define FMC_ACCESS_MODE_B (0x10000000U) +#define FMC_ACCESS_MODE_C (0x20000000U) +#define FMC_ACCESS_MODE_D (0x30000000U) +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller + * @{ + */ +/** @defgroup FMC_NAND_Bank FMC NAND Bank + * @{ + */ +#define FMC_NAND_BANK3 (0x00000100U) +/** + * @} + */ + +/** @defgroup FMC_Wait_feature FMC Wait feature + * @{ + */ +#define FMC_NAND_WAIT_FEATURE_DISABLE (0x00000000U) +#define FMC_NAND_WAIT_FEATURE_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type + * @{ + */ +#define FMC_PCR_MEMORY_TYPE_NAND (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width + * @{ + */ +#define FMC_NAND_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_NAND_MEM_BUS_WIDTH_16 (0x00000010U) +/** + * @} + */ + +/** @defgroup FMC_ECC FMC ECC + * @{ + */ +#define FMC_NAND_ECC_DISABLE (0x00000000U) +#define FMC_NAND_ECC_ENABLE (0x00000040U) +/** + * @} + */ + +/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size + * @{ + */ +#define FMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U) +#define FMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U) +#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U) +#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U) +#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U) +#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller + * @{ + */ +/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank + * @{ + */ +#define FMC_SDRAM_BANK1 (0x00000000U) +#define FMC_SDRAM_BANK2 (0x00000001U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number + * @{ + */ +#define FMC_SDRAM_COLUMN_BITS_NUM_8 (0x00000000U) +#define FMC_SDRAM_COLUMN_BITS_NUM_9 (0x00000001U) +#define FMC_SDRAM_COLUMN_BITS_NUM_10 (0x00000002U) +#define FMC_SDRAM_COLUMN_BITS_NUM_11 (0x00000003U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number + * @{ + */ +#define FMC_SDRAM_ROW_BITS_NUM_11 (0x00000000U) +#define FMC_SDRAM_ROW_BITS_NUM_12 (0x00000004U) +#define FMC_SDRAM_ROW_BITS_NUM_13 (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width + * @{ + */ +#define FMC_SDRAM_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_SDRAM_MEM_BUS_WIDTH_16 (0x00000010U) +#define FMC_SDRAM_MEM_BUS_WIDTH_32 (0x00000020U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number + * @{ + */ +#define FMC_SDRAM_INTERN_BANKS_NUM_2 (0x00000000U) +#define FMC_SDRAM_INTERN_BANKS_NUM_4 (0x00000040U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency + * @{ + */ +#define FMC_SDRAM_CAS_LATENCY_1 (0x00000080U) +#define FMC_SDRAM_CAS_LATENCY_2 (0x00000100U) +#define FMC_SDRAM_CAS_LATENCY_3 (0x00000180U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection + * @{ + */ +#define FMC_SDRAM_WRITE_PROTECTION_DISABLE (0x00000000U) +#define FMC_SDRAM_WRITE_PROTECTION_ENABLE (0x00000200U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period + * @{ + */ +#define FMC_SDRAM_CLOCK_DISABLE (0x00000000U) +#define FMC_SDRAM_CLOCK_PERIOD_2 (0x00000800U) +#define FMC_SDRAM_CLOCK_PERIOD_3 (0x00000C00U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst + * @{ + */ +#define FMC_SDRAM_RBURST_DISABLE (0x00000000U) +#define FMC_SDRAM_RBURST_ENABLE (0x00001000U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay + * @{ + */ +#define FMC_SDRAM_RPIPE_DELAY_0 (0x00000000U) +#define FMC_SDRAM_RPIPE_DELAY_1 (0x00002000U) +#define FMC_SDRAM_RPIPE_DELAY_2 (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode + * @{ + */ +#define FMC_SDRAM_CMD_NORMAL_MODE (0x00000000U) +#define FMC_SDRAM_CMD_CLK_ENABLE (0x00000001U) +#define FMC_SDRAM_CMD_PALL (0x00000002U) +#define FMC_SDRAM_CMD_AUTOREFRESH_MODE (0x00000003U) +#define FMC_SDRAM_CMD_LOAD_MODE (0x00000004U) +#define FMC_SDRAM_CMD_SELFREFRESH_MODE (0x00000005U) +#define FMC_SDRAM_CMD_POWERDOWN_MODE (0x00000006U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target + * @{ + */ +#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2 +#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1 +#define FMC_SDRAM_CMD_TARGET_BANK1_2 (0x00000018U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status + * @{ + */ +#define FMC_SDRAM_NORMAL_MODE (0x00000000U) +#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0 +#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1 +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition + * @{ + */ +#define FMC_IT_RISING_EDGE (0x00000008U) +#define FMC_IT_LEVEL (0x00000010U) +#define FMC_IT_FALLING_EDGE (0x00000020U) +#define FMC_IT_REFRESH_ERROR (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition + * @{ + */ +#define FMC_FLAG_RISING_EDGE (0x00000001U) +#define FMC_FLAG_LEVEL (0x00000002U) +#define FMC_FLAG_FALLING_EDGE (0x00000004U) +#define FMC_FLAG_FEMPT (0x00000040U) +#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE +#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY +#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros + * @{ + */ +/** + * @brief Enable the FMC Peripheral. + * @retval None + */ +#define __FMC_ENABLE() (FMC_Bank1_R->BTCR[0] |= FMC_BCR1_FMCEN) + +/** + * @brief Disable the FMC Peripheral. + * @retval None + */ +#define __FMC_DISABLE() (FMC_Bank1_R->BTCR[0] &= ~FMC_BCR1_FMCEN) +/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros + * @brief macros to handle NOR device enable/disable and read/write operations + * @{ + */ + +/** + * @brief Enable the NORSRAM device access. + * @param __INSTANCE__ FMC_NORSRAM Instance + * @param __BANK__ FMC_NORSRAM Bank + * @retval None + */ +#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + |= FMC_BCRx_MBKEN) + +/** + * @brief Disable the NORSRAM device access. + * @param __INSTANCE__ FMC_NORSRAM Instance + * @param __BANK__ FMC_NORSRAM Bank + * @retval None + */ +#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + &= ~FMC_BCRx_MBKEN) + +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros + * @brief macros to handle NAND device enable/disable + * @{ + */ + +/** + * @brief Enable the NAND device access. + * @param __INSTANCE__ FMC_NAND Instance + * @retval None + */ +#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) + +/** + * @brief Disable the NAND device access. + * @param __INSTANCE__ FMC_NAND Instance + * @param __BANK__ FMC_NAND Bank + * @retval None + */ +#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN) + +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Interrupt FMC NAND Interrupt + * @brief macros to handle NAND interrupts + * @{ + */ + +/** + * @brief Enable the NAND device interrupt. + * @param __INSTANCE__ FMC_NAND instance + * @param __INTERRUPT__ FMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FMC_IT_LEVEL: Interrupt level. + * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__)) + +/** + * @brief Disable the NAND device interrupt. + * @param __INSTANCE__ FMC_NAND Instance + * @param __INTERRUPT__ FMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FMC_IT_LEVEL: Interrupt level. + * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the NAND device. + * @param __INSTANCE__ FMC_NAND Instance + * @param __BANK__ FMC_NAND Bank + * @param __FLAG__ FMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the NAND device. + * @param __INSTANCE__ FMC_NAND Instance + * @param __FLAG__ FMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__)) + +/** + * @} + */ + + +/** @defgroup FMC_LL_SDRAM_Interrupt FMC SDRAM Interrupt + * @brief macros to handle SDRAM interrupts + * @{ + */ + +/** + * @brief Enable the SDRAM device interrupt. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __INTERRUPT__ FMC_SDRAM interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error + * @retval None + */ +#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__)) + +/** + * @brief Disable the SDRAM device interrupt. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __INTERRUPT__ FMC_SDRAM interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error + * @retval None + */ +#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the SDRAM device. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __FLAG__ FMC_SDRAM flag + * This parameter can be any combination of the following values: + * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error. + * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag. + * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the SDRAM device. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __FLAG__ FMC_SDRAM flag + * This parameter can be any combination of the following values: + * @arg FMC_SDRAM_FLAG_REFRESH_ERROR + * @retval None + */ +#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__)) + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions + * @{ + */ + +/** @defgroup FMC_LL_NORSRAM NOR SRAM + * @{ + */ +/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_InitTypeDef *Init); +HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode); +HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions + * @{ + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ + +/** @defgroup FMC_LL_NAND NAND + * @{ + */ +/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init); +HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions + * @{ + */ +HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout); +/** + * @} + */ +/** + * @} + */ + + +/** @defgroup FMC_LL_SDRAM SDRAM + * @{ + */ +/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init); +HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions + * @{ + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); +HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate); +HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, + uint32_t AutoRefreshNumber); +uint32_t FMC_SDRAM_GetModeStatus(const FMC_SDRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_FMC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_gpio.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_gpio.h new file mode 100644 index 000000000..6c009b9d3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_gpio.h @@ -0,0 +1,994 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7RSxx_LL_GPIO_H +#define __STM32H7RSxx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || \ + defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || \ + defined (GPIOM) || defined (GPION) || defined (GPIOO) || defined (GPIOP) + +/** @defgroup GPIO_LL GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * LL_GPIO_GetAFPin_0_7 + * LL_GPIO_SetAFPin_0_7 + * LL_GPIO_SetAFPin_8_15 + * LL_GPIO_GetAFPin_8_15 + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * GPIO_MODER_MODE1_Pos)), + (Mode << (POSITION_VAL(Pin) * GPIO_MODER_MODE1_Pos))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * GPIO_MODER_MODE1_Pos))) + >> (POSITION_VAL(Pin) * GPIO_MODER_MODE1_Pos)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * GPIO_OSPEEDR_OSPEED1_Pos)), + (Speed << (POSITION_VAL(Pin) * GPIO_OSPEEDR_OSPEED1_Pos))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * GPIO_OSPEEDR_OSPEED1_Pos))) + >> (POSITION_VAL(Pin) * GPIO_OSPEEDR_OSPEED1_Pos)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * GPIO_PUPDR_PUPD1_Pos)), + (Pull << (POSITION_VAL(Pin) * GPIO_PUPDR_PUPD1_Pos))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * GPIO_PUPDR_PUPD1_Pos))) + >> (POSITION_VAL(Pin) * GPIO_PUPDR_PUPD1_Pos)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * GPIO_AFRL_AFSEL1_Pos)), + (Alternate << (POSITION_VAL(Pin) * GPIO_AFRL_AFSEL1_Pos))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * GPIO_AFRL_AFSEL1_Pos))) + >> (POSITION_VAL(Pin) * GPIO_AFRL_AFSEL1_Pos)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * GPIO_AFRH_AFSEL9_Pos)), + (Alternate << (POSITION_VAL(Pin >> 8U) * GPIO_AFRH_AFSEL9_Pos))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(const GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * GPIO_AFRH_AFSEL9_Pos))) + >> (POSITION_VAL(Pin >> 8U) * GPIO_AFRH_AFSEL9_Pos)); +} + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(const GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(const GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(const GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(const GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(const GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(const GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(const GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, const LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || */ +/* defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || */ +/* defined (GPIOM) || defined (GPION) || defined (GPIOO) || defined (GPIOP) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_GPIO_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i2c.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i2c.h new file mode 100644 index 000000000..fcb02437b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i2c.h @@ -0,0 +1,2372 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_I2C_H +#define STM32H7RSxx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(const I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable I2C Fast Mode Plus (FMP = 1). + * @note 20mA I/O drive enable + * @rmtoll CR1 FMP LL_I2C_EnableFastModePlus + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableFastModePlus(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_FMP); +} + +/** + * @brief Disable I2C Fast Mode Plus (FMP = 0). + * @note 20mA I/O drive disable + * @rmtoll CR1 FMP LL_I2C_DisableFastModePlus + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableFastModePlus(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_FMP); +} + +/** + * @brief Check if the I2C Fast Mode Plus is enabled or disabled. + * @rmtoll CR1 FMP LL_I2C_IsEnabledFastModePlus + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledFastModePlus(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_FMP) == (I2C_CR1_FMP)) ? 1UL : 0UL); +} + +/** + * @brief Enable automatic clear of ADDR flag. + * @rmtoll CR1 ADDRACLR LL_I2C_EnableAutoClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRACLR); +} + +/** + * @brief Disable automatic clear of ADDR flag. + * @rmtoll CR1 ADDRACLR LL_I2C_DisableAutoClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRACLR); +} + +/** + * @brief Check if the automatic clear of ADDR flag is enabled or disabled. + * @rmtoll CR1 ADDRACLR LL_I2C_IsEnabledAutoClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoClearFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRACLR) == (I2C_CR1_ADDRACLR)) ? 1UL : 0UL); +} + +/** + * @brief Enable automatic clear of STOP flag. + * @rmtoll CR1 STOPFACLR LL_I2C_EnableAutoClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPFACLR); +} + +/** + * @brief Disable automatic clear of STOP flag. + * @rmtoll CR1 STOPFACLR LL_I2C_DisableAutoClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPFACLR); +} + +/** + * @brief Check if the automatic clear of STOP flag is enabled or disabled. + * @rmtoll CR1 STOPFACLR LL_I2C_IsEnabledAutoClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoClearFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPFACLR) == (I2C_CR1_STOPFACLR)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(const I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)SlaveAddr & I2C_CR2_SADD) | \ + ((uint32_t)SlaveAddrSize & I2C_CR2_ADD10) | \ + (((uint32_t)TransferSize << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)EndMode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + tmp); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(const I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_I2C_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i3c.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i3c.h new file mode 100644 index 000000000..e9c86907e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_i3c.h @@ -0,0 +1,4407 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_i3c.h + * @author MCD Application Team + * @brief Header file of I3C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_I3C_H +#define STM32H7RSxx_LL_I3C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (I3C1) + +/** @defgroup I3C_LL I3C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I3C_LL_Private_Macros I3C Private Macros + * @{ + */ +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) +#endif /* !UNUSED */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I3C_LL_ES_CONTROLLER_BUS_CONFIG_STRUCTURE_DEFINITION I3C Controller Bus Configuration Structure definition + * @brief I3C LL Controller Bus Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t SDAHoldTime; /*!< Specifies the I3C SDA hold time. + This parameter must be a value of @ref I3C_LL_EC_SDA_HOLD_TIME */ + + uint32_t WaitTime; /*!< Specifies the time that the main and the new controllers should wait before + issuing a start. + This parameter must be a value of @ref I3C_LL_EC_OWN_ACTIVITY_STATE */ + + uint8_t SCLPPLowDuration; /*!< Specifies the I3C SCL low duration in number of kernel clock cycles + in I3C push-pull phases. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ + + uint8_t SCLI3CHighDuration; /*!< Specifies the I3C SCL high duration in number of kernel clock cycles, + used for I3C messages for I3C open-drain and push pull phases. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ + + uint8_t SCLODLowDuration; /*!< Specifies the I3C SCL low duration in number of kernel clock cycles in + open-drain phases, used for legacy I2C commands and for I3C open-drain phases. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ + + uint8_t SCLI2CHighDuration; /*!< Specifies the I3C SCL high duration in number of kernel clock cycles, used + for legacy I2C commands. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ + + uint8_t BusFreeDuration; /*!< Specifies the I3C controller duration in number of kernel clock cycles, after + a stop and before a start. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ + + uint8_t BusIdleDuration; /*!< Specifies the I3C controller duration in number of kernel clock cycles to be + elapsed, after that both SDA and SCL are continuously high and stable + before issuing a hot-join event. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ +} LL_I3C_CtrlBusConfTypeDef; +/** + * @} + */ + +/** @defgroup I3C_LL_ES_TARGET_BUS_CONFIG_STRUCTURE_DEFINITION I3C Target Bus Configuration Structure definition + * @brief I3C LL Target Bus Configuration Structure definition + * @{ + */ +typedef struct +{ + uint8_t BusAvailableDuration; /*!< Specifies the I3C target duration in number of kernel clock cycles, when + the SDA and the SCL are high for at least taval. + This parameter must be a number between Min_Data=0 and Max_Data=0xFF. */ +} LL_I3C_TgtBusConfTypeDef; +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I3C_LL_ES_INIT I3C Exported Init structure + * @brief I3C LL Init Structure definition + * @{ + */ +typedef struct +{ + LL_I3C_CtrlBusConfTypeDef CtrlBusCharacteristic; /*!< Specifies the I3C controller bus characteristic configuration + when Controller mode */ + + LL_I3C_TgtBusConfTypeDef TgtBusCharacteristic; /*!< Specifies the I3C target bus characteristic configuration + when Target mode */ + +} LL_I3C_InitTypeDef; +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I3C_LL_Exported_Constants I3C Exported Constants + * @{ + */ + +/** @defgroup I3C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I3C_ReadReg function + * @{ + */ +#define LL_I3C_EVR_CFEF I3C_EVR_CFEF +#define LL_I3C_EVR_TXFEF I3C_EVR_TXFEF +#define LL_I3C_EVR_CFNFF I3C_EVR_CFNFF +#define LL_I3C_EVR_SFNEF I3C_EVR_SFNEF +#define LL_I3C_EVR_TXFNFF I3C_EVR_TXFNFF +#define LL_I3C_EVR_RXFNEF I3C_EVR_RXFNEF +#define LL_I3C_EVR_RXLASTF I3C_EVR_RXLASTF +#define LL_I3C_EVR_TXLASTF I3C_EVR_TXLASTF +#define LL_I3C_EVR_FCF I3C_EVR_FCF +#define LL_I3C_EVR_RXTGTENDF I3C_EVR_RXTGTENDF +#define LL_I3C_EVR_ERRF I3C_EVR_ERRF +#define LL_I3C_EVR_IBIF I3C_EVR_IBIF +#define LL_I3C_EVR_IBIENDF I3C_EVR_IBIENDF +#define LL_I3C_EVR_CRF I3C_EVR_CRF +#define LL_I3C_EVR_CRUPDF I3C_EVR_CRUPDF +#define LL_I3C_EVR_HJF I3C_EVR_HJF +#define LL_I3C_EVR_WKPF I3C_EVR_WKPF +#define LL_I3C_EVR_GETF I3C_EVR_GETF +#define LL_I3C_EVR_STAF I3C_EVR_STAF +#define LL_I3C_EVR_DAUPDF I3C_EVR_DAUPDF +#define LL_I3C_EVR_MWLUPDF I3C_EVR_MWLUPDF +#define LL_I3C_EVR_MRLUPDF I3C_EVR_MRLUPDF +#define LL_I3C_EVR_RSTF I3C_EVR_RSTF +#define LL_I3C_EVR_ASUPDF I3C_EVR_ASUPDF +#define LL_I3C_EVR_INTUPDF I3C_EVR_INTUPDF +#define LL_I3C_EVR_DEFF I3C_EVR_DEFF +#define LL_I3C_EVR_GRPF I3C_EVR_GRPF +#define LL_I3C_SER_PERR I3C_SER_PERR +#define LL_I3C_SER_STALL I3C_SER_STALL +#define LL_I3C_SER_DOVR I3C_SER_DOVR +#define LL_I3C_SER_COVR I3C_SER_COVR +#define LL_I3C_SER_ANACK I3C_SER_ANACK +#define LL_I3C_SER_DNACK I3C_SER_DNACK +#define LL_I3C_SER_DERR I3C_SER_DERR +/** + * @} + */ + +/** @defgroup I3C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I3C_ReadReg and LL_I3C_WriteReg functions + * @{ + */ +#define LL_I3C_IER_CFNFIE I3C_IER_CFNFIE +#define LL_I3C_IER_SFNEIE I3C_IER_SFNEIE +#define LL_I3C_IER_TXFNFIE I3C_IER_TXFNFIE +#define LL_I3C_IER_RXFNEIE I3C_IER_RXFNEIE +#define LL_I3C_IER_FCIE I3C_IER_FCIE +#define LL_I3C_IER_RXTGTENDIE I3C_IER_RXTGTENDIE +#define LL_I3C_IER_ERRIE I3C_IER_ERRIE +#define LL_I3C_IER_IBIIE I3C_IER_IBIIE +#define LL_I3C_IER_IBIENDIE I3C_IER_IBIENDIE +#define LL_I3C_IER_CRIE I3C_IER_CRIE +#define LL_I3C_IER_CRUPDIE I3C_IER_CRUPDIE +#define LL_I3C_IER_HJIE I3C_IER_HJIE +#define LL_I3C_IER_WKPIE I3C_IER_WKPIE +#define LL_I3C_IER_GETIE I3C_IER_GETIE +#define LL_I3C_IER_STAIE I3C_IER_STAIE +#define LL_I3C_IER_DAUPDIE I3C_IER_DAUPDIE +#define LL_I3C_IER_MWLUPDIE I3C_IER_MWLUPDIE +#define LL_I3C_IER_MRLUPDIE I3C_IER_MRLUPDIE +#define LL_I3C_IER_RSTIE I3C_IER_RSTIE +#define LL_I3C_IER_ASUPDIE I3C_IER_ASUPDIE +#define LL_I3C_IER_INTUPDIE I3C_IER_INTUPDIE +#define LL_I3C_IER_DEFIE I3C_IER_DEFIE +#define LL_I3C_IER_GRPIE I3C_IER_GRPIE +/** + * @} + */ + +/** @defgroup I3C_LL_EC_MODE MODE + * @{ + */ +#define LL_I3C_MODE_CONTROLLER I3C_CFGR_CRINIT /*!< I3C Controller mode */ +#define LL_I3C_MODE_TARGET 0x00000000U /*!< I3C Target (Controller capable) mode */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I3C_DMA_REG_DATA_TRANSMIT_BYTE 0x00000000U /*!< Get address of data register used + for transmission in Byte */ +#define LL_I3C_DMA_REG_DATA_RECEIVE_BYTE 0x00000001U /*!< Get address of data register used + for reception in Byte */ +#define LL_I3C_DMA_REG_DATA_TRANSMIT_WORD 0x00000002U /*!< Get address of data register used for + transmission in Word */ +#define LL_I3C_DMA_REG_DATA_RECEIVE_WORD 0x00000003U /*!< Get address of data register used + for reception in Word */ +#define LL_I3C_DMA_REG_STATUS 0x00000004U /*!< Get address of status register used + for transfer status in Word */ +#define LL_I3C_DMA_REG_CONTROL 0x00000005U /*!< Get address of control register used + for transfer control in Word */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_RX_THRESHOLD RX THRESHOLD + * @{ + */ +#define LL_I3C_RXFIFO_THRESHOLD_1_4 0x00000000U +/*!< Rx Fifo Threshold is 1 byte in a Fifo depth of 4 bytes */ +#define LL_I3C_RXFIFO_THRESHOLD_4_4 I3C_CFGR_RXTHRES +/*!< Rx Fifo Threshold is 4 bytes in a Fifo depth of 4 bytes */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_TX_THRESHOLD TX THRESHOLD + * @{ + */ +#define LL_I3C_TXFIFO_THRESHOLD_1_4 0x00000000U +/*!< Tx Fifo Threshold is 1 byte in a Fifo depth of 4 bytes */ +#define LL_I3C_TXFIFO_THRESHOLD_4_4 I3C_CFGR_TXTHRES +/*!< Tx Fifo Threshold is 4 bytes in a Fifo depth of 4 bytes */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_PAYLOAD PAYLOAD + * @{ + */ +#define LL_I3C_PAYLOAD_EMPTY 0x00000000U +/*!< Empty payload, no additional data after IBI acknowledge */ +#define LL_I3C_PAYLOAD_1_BYTE I3C_MAXRLR_IBIP_0 +/*!< One additional data byte after IBI acknowledge */ +#define LL_I3C_PAYLOAD_2_BYTES I3C_MAXRLR_IBIP_1 +/*!< Two additional data bytes after IBI acknowledge */ +#define LL_I3C_PAYLOAD_3_BYTES (I3C_MAXRLR_IBIP_1 | I3C_MAXRLR_IBIP_0) +/*!< Three additional data bytes after IBI acknowledge */ +#define LL_I3C_PAYLOAD_4_BYTES I3C_MAXRLR_IBIP_2 +/*!< Four additional data bytes after IBI acknowledge */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_SDA_HOLD_TIME SDA HOLD TIME 0 + * @{ + */ +#define LL_I3C_SDA_HOLD_TIME_0_5 0x00000000U /*!< SDA hold time is 0.5 x ti3cclk */ +#define LL_I3C_SDA_HOLD_TIME_1_5 I3C_TIMINGR1_SDA_HD /*!< SDA hold time is 1.5 x ti3cclk */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_OWN_ACTIVITY_STATE OWN ACTIVITY STATE + * @{ + */ +#define LL_I3C_OWN_ACTIVITY_STATE_0 0x00000000U +/*!< Own Controller Activity state 0 */ +#define LL_I3C_OWN_ACTIVITY_STATE_1 I3C_TIMINGR1_ASNCR_0 +/*!< Own Controller Activity state 1 */ +#define LL_I3C_OWN_ACTIVITY_STATE_2 I3C_TIMINGR1_ASNCR_1 +/*!< Own Controller Activity state 2 */ +#define LL_I3C_OWN_ACTIVITY_STATE_3 (I3C_TIMINGR1_ASNCR_1 | I3C_TIMINGR1_ASNCR_0) +/*!< Own Controller Activity state 3 */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_DEVICE_ROLE_AS DEVICE ROLE AS + * @{ + */ +#define LL_I3C_DEVICE_ROLE_AS_TARGET 0x00000000U /*!< I3C Target */ +#define LL_I3C_DEVICE_ROLE_AS_CONTROLLER I3C_BCR_BCR6 /*!< I3C Controller */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_IBI_NO_ADDITIONAL IBI NO ADDITIONAL + * @{ + */ +#define LL_I3C_IBI_NO_ADDITIONAL_DATA 0x00000000U /*!< No data byte follows the accepted IBI */ +#define LL_I3C_IBI_ADDITIONAL_DATA I3C_BCR_BCR2 /*!< A Mandatory Data Byte (MDB) + follows the accepted IBI */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_MAX_DATA_SPEED_LIMITATION MAX DATA SPEED LIMITATION + * @{ + */ +#define LL_I3C_NO_DATA_SPEED_LIMITATION 0x00000000U /*!< No max data speed limitation */ +#define LL_I3C_MAX_DATA_SPEED_LIMITATION I3C_BCR_BCR0 /*!< Max data speed limitation */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_IBI_MDB_READ_NOTIFICATION IBI MDB READ NOTIFICATION + * @{ + */ +#define LL_I3C_MDB_NO_PENDING_READ_NOTIFICATION 0x00000000U +/*!< No support of pending read notification via the IBI MDB[7:0] value */ +#define LL_I3C_MDB_PENDING_READ_NOTIFICATION I3C_GETCAPR_CAPPEND +/*!< Support of pending read notification via the IBI MDB[7:0] value */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_HANDOFF_GRP_ADDR_NOT HANDOFF GRP ADDR NOT + * @{ + */ +#define LL_I3C_HANDOFF_GRP_ADDR_NOT_SUPPORTED 0x00000000U /*!< Group Address Handoff is not supported */ +#define LL_I3C_HANDOFF_GRP_ADDR_SUPPORTED I3C_CRCAPR_CAPGRP /*!< Group Address Handoff is supported */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_HANDOFF HANDOFF + * @{ + */ +#define LL_I3C_HANDOFF_NOT_DELAYED 0x00000000U +/*!< Additional time to process controllership handoff is not needed */ +#define LL_I3C_HANDOFF_DELAYED I3C_CRCAPR_CAPDHOFF +/*!< Additional time to process controllership handoff is needed */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_HANDOFF_ACTIVITY_STATE HANDOFF ACTIVITY STATE + * @{ + */ +#define LL_I3C_HANDOFF_ACTIVITY_STATE_0 0x00000000U +/*!< Indicates that will act according to Activity State 0 after controllership handoff */ +#define LL_I3C_HANDOFF_ACTIVITY_STATE_1 I3C_GETMXDSR_HOFFAS_0 +/*!< Indicates that will act according to Activity State 1 after controllership handoff */ +#define LL_I3C_HANDOFF_ACTIVITY_STATE_2 I3C_GETMXDSR_HOFFAS_1 +/*!< Indicates that will act according to Activity State 2 after controllership handoff */ +#define LL_I3C_HANDOFF_ACTIVITY_STATE_3 (I3C_GETMXDSR_HOFFAS_1 | I3C_GETMXDSR_HOFFAS_0) +/*!< Indicates that will act according to Activity State 3 after controllership handoff */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_GETMXDS_FORMAT GETMXDS FORMAT + * @{ + */ +#define LL_I3C_GETMXDS_FORMAT_1 0x00000000U +/*!< GETMXDS CCC Format 1 is used, no MaxRdTurn field in response */ +#define LL_I3C_GETMXDS_FORMAT_2_LSB I3C_GETMXDSR_FMT_0 +/*!< GETMXDS CCC Format 2 is used, MaxRdTurn field in response, LSB = RDTURN[7:0] */ +#define LL_I3C_GETMXDS_FORMAT_2_MID I3C_GETMXDSR_FMT_1 +/*!< GETMXDS CCC Format 2 is used, MaxRdTurn field in response, Middle byte = RDTURN[7:0] */ +#define LL_I3C_GETMXDS_FORMAT_2_MSB (I3C_GETMXDSR_FMT_1 | I3C_GETMXDSR_FMT_0) +/*!< GETMXDS CCC Format 2 is used, MaxRdTurn field in response, MSB = RDTURN[7:0] */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_GETMXDS_TSCO GETMXDS TSCO + * @{ + */ +#define LL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS 0x00000000U /*!< clock-to-data turnaround time tSCO <= 12ns */ +#define LL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS I3C_GETMXDSR_TSCO /*!< clock-to-data turnaround time tSCO > 12ns */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_BUS_ACTIVITY_STATE BUS ACTIVITY STATE + * @{ + */ +#define LL_I3C_BUS_ACTIVITY_STATE_0 0x00000000U +/*!< Controller on the Bus Activity State 0 */ +#define LL_I3C_BUS_ACTIVITY_STATE_1 I3C_DEVR0_AS_0 +/*!< Controller on the Bus Activity State 1 */ +#define LL_I3C_BUS_ACTIVITY_STATE_2 I3C_DEVR0_AS_1 +/*!< Controller on the Bus Activity State 2 */ +#define LL_I3C_BUS_ACTIVITY_STATE_3 (I3C_DEVR0_AS_1 | I3C_DEVR0_AS_0) +/*!< Controller on the Bus Activity State 3 */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_RESET_ACTION RESET ACTION + * @{ + */ +#define LL_I3C_RESET_ACTION_NONE 0x00000000U +/*!< No Reset Action Required */ +#define LL_I3C_RESET_ACTION_PARTIAL I3C_DEVR0_RSTACT_0 +/*!< Reset of some internal registers of the peripheral*/ +#define LL_I3C_RESET_ACTION_FULL I3C_DEVR0_RSTACT_1 +/*!< Reset all internal registers of the peripheral */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_DIRECTION DIRECTION + * @{ + */ +#define LL_I3C_DIRECTION_WRITE 0x00000000U /*!< Write transfer */ +#define LL_I3C_DIRECTION_READ I3C_CR_RNW /*!< Read transfer */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_GENERATE GENERATE + * @{ + */ +#define LL_I3C_GENERATE_STOP I3C_CR_MEND +/*!< Generate Stop condition after sending a message */ +#define LL_I3C_GENERATE_RESTART 0x00000000U +/*!< Generate Restart condition after sending a message */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_CONTROLLER_MTYPE CONTROLLER MTYPE + * @{ + */ +#define LL_I3C_CONTROLLER_MTYPE_RELEASE 0x00000000U +/*!< SCL output clock stops running until next instruction executed */ +#define LL_I3C_CONTROLLER_MTYPE_HEADER I3C_CR_MTYPE_0 +/*!< Header Message */ +#define LL_I3C_CONTROLLER_MTYPE_PRIVATE I3C_CR_MTYPE_1 +/*!< Private Message Type */ +#define LL_I3C_CONTROLLER_MTYPE_DIRECT (I3C_CR_MTYPE_1 | I3C_CR_MTYPE_0) +/*!< Direct Message Type */ +#define LL_I3C_CONTROLLER_MTYPE_LEGACY_I2C I3C_CR_MTYPE_2 +/*!< Legacy I2C Message Type */ +#define LL_I3C_CONTROLLER_MTYPE_CCC (I3C_CR_MTYPE_2 | I3C_CR_MTYPE_1) +/*!< Common Command Code */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_TARGET_MTYPE_HOT TARGET MTYPE HOT + * @{ + */ +#define LL_I3C_TARGET_MTYPE_HOT_JOIN I3C_CR_MTYPE_3 /*!< Hot Join*/ +#define LL_I3C_TARGET_MTYPE_CONTROLLER_ROLE_REQ (I3C_CR_MTYPE_3 | I3C_CR_MTYPE_0) /*!< Controller-role Request */ +#define LL_I3C_TARGET_MTYPE_IBI (I3C_CR_MTYPE_3 | I3C_CR_MTYPE_1) /*!< In Band Interrupt (IBI) */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_MESSAGE MESSAGE + * @{ + */ +#define LL_I3C_MESSAGE_ERROR 0x00000000U /*!< An error has been detected in the message */ +#define LL_I3C_MESSAGE_SUCCESS I3C_SR_OK /*!< The message ended with success */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_MESSAGE_DIRECTION MESSAGE DIRECTION + * @{ + */ +#define LL_I3C_MESSAGE_DIRECTION_WRITE 0x00000000U /*!< Write data or command */ +#define LL_I3C_MESSAGE_DIRECTION_READ I3C_SR_DIR /*!< Read data */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_CONTROLLER_ERROR CONTROLLER ERROR + * @{ + */ +#define LL_I3C_CONTROLLER_ERROR_CE0 0x00000000U +/*!< Controller detected an illegally formatted CCC */ +#define LL_I3C_CONTROLLER_ERROR_CE1 I3C_SER_CODERR_0 +/*!< Controller detected that transmitted data on the bus is different than expected */ +#define LL_I3C_CONTROLLER_ERROR_CE2 I3C_SER_CODERR_1 +/*!< Controller detected that broadcast address 7'h7E has been nacked */ +#define LL_I3C_CONTROLLER_ERROR_CE3 (I3C_SER_CODERR_1 | I3C_SER_CODERR_0) +/*!< Controller detected that new Controller did not drive the bus after Controller-role handoff */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_TARGET_ERROR TARGET ERROR + * @{ + */ +#define LL_I3C_TARGET_ERROR_TE0 I3C_SER_CODERR_3 +/*!< Target detected an invalid broadcast address */ +#define LL_I3C_TARGET_ERROR_TE1 (I3C_SER_CODERR_3 | I3C_SER_CODERR_0) +/*!< Target detected an invalid CCC Code */ +#define LL_I3C_TARGET_ERROR_TE2 (I3C_SER_CODERR_3 | I3C_SER_CODERR_1) +/*!< Target detected an invalid write data */ +#define LL_I3C_TARGET_ERROR_TE3 (I3C_SER_CODERR_3 | I3C_SER_CODERR_1 | I3C_SER_CODERR_0) +/*!< Target detected an invalid assigned address during Dynamic Address Assignment procedure */ +#define LL_I3C_TARGET_ERROR_TE4 (I3C_SER_CODERR_3 | I3C_SER_CODERR_2) +/*!< Target detected 7'h7E missing after Restart during Dynamic Address Assignment procedure */ +#define LL_I3C_TARGET_ERROR_TE5 (I3C_SER_CODERR_3 | I3C_SER_CODERR_2 | I3C_SER_CODERR_0) +/*!< Target detected an illegally formatted CCC */ +#define LL_I3C_TARGET_ERROR_TE6 (I3C_SER_CODERR_3 | I3C_SER_CODERR_2 | I3C_SER_CODERR_1) +/*!< Target detected that transmitted data on the bus is different than expected */ +/** + * @} + */ + +/** @defgroup I3C_BCR_IN_PAYLOAD I3C BCR IN PAYLOAD + * @{ + */ +#define LL_I3C_BCR_IN_PAYLOAD_SHIFT 48 /*!< BCR field in target payload */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_IBI_CAPABILITY IBI CAPABILITY + * @{ + */ +#define LL_I3C_IBI_CAPABILITY I3C_DEVRX_IBIACK +/*!< Controller acknowledge Target In Band Interrupt capable */ +#define LL_I3C_IBI_NO_CAPABILITY 0x00000000U +/*!< Controller no acknowledge Target In Band Interrupt capable */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_IBI_ADDITIONAL_DATA IBI ADDITIONAL DATA + * @{ + */ +#define LL_I3C_IBI_DATA_ENABLE I3C_DEVRX_IBIDEN +/*!< A mandatory data byte follows the IBI acknowledgement */ +#define LL_I3C_IBI_DATA_DISABLE 0x00000000U +/*!< No mandatory data byte follows the IBI acknowledgement */ +/** + * @} + */ + +/** @defgroup I3C_LL_EC_CR_CAPABILITY CR CAPABILITY + * @{ + */ +#define LL_I3C_CR_CAPABILITY I3C_DEVRX_CRACK +/*!< Controller acknowledge Target Controller Role capable */ +#define LL_I3C_CR_NO_CAPABILITY 0x00000000U +/*!< Controller no acknowledge Target Controller Role capable */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I3C_LL_Exported_Macros I3C Exported Macros + * @{ + */ + +/** @defgroup I3C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** @brief Get Bus Characterics in payload (64bits) receive during ENTDAA procedure. + * @param __PAYLOAD__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFFFFFFFF. + * @retval The value of BCR Return value between Min_Data=0x00 and Max_Data=0xFF. + */ +#define LL_I3C_GET_BCR(__PAYLOAD__) (((uint32_t)((uint64_t)(__PAYLOAD__) >> LL_I3C_BCR_IN_PAYLOAD_SHIFT)) & \ + I3C_BCR_BCR) + +/** @brief Check IBI request capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval Value of @ref I3C_LL_EC_IBI_CAPABILITY. + */ +#define LL_I3C_GET_IBI_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR1_Msk) >> I3C_BCR_BCR1_Pos) == 1U) \ + ? LL_I3C_IBI_CAPABILITY : LL_I3C_IBI_NO_CAPABILITY) + +/** @brief Check IBI additional data byte capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval Value of @ref I3C_LL_EC_IBI_ADDITIONAL_DATA. + */ +#define LL_I3C_GET_IBI_PAYLOAD(__BCR__) (((((__BCR__) & I3C_BCR_BCR2_Msk) >> I3C_BCR_BCR2_Pos) == 1U) \ + ? LL_I3C_IBI_DATA_ENABLE : LL_I3C_IBI_DATA_DISABLE) + +/** @brief Check Controller role request capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval Value of @ref I3C_LL_EC_CR_CAPABILITY. + */ +#define LL_I3C_GET_CR_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR6_Msk) >> I3C_BCR_BCR6_Pos) == 1U) \ + ? LL_I3C_CR_CAPABILITY : LL_I3C_CR_NO_CAPABILITY) + +/** + * @brief Write a value in I3C register + * @param __INSTANCE__ I3C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I3C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I3C register + * @param __INSTANCE__ I3C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I3C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I3C_LL_Exported_Functions I3C Exported Functions + * @{ + */ + +/** @defgroup I3C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I3C peripheral (EN = 1). + * @rmtoll CFGR EN LL_I3C_Enable + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_Enable(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_EN); +} + +/** + * @brief Disable I3C peripheral (EN = 0). + * @note Controller mode: before clearing EN, all possible target requests must be disabled using DISEC CCC. + * Target mode: software is not expected clearing EN unless a partial reset of the IP is needed + * @rmtoll CFGR EN LL_I3C_Disable + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_Disable(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_EN); +} + +/** + * @brief Check if the I3C peripheral is enabled or disabled. + * @rmtoll CFGR EN LL_I3C_IsEnabled + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabled(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_EN) == (I3C_CFGR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Check if Reset action is required or not required. + * @note This bit indicates if Reset Action field has been updated by HW upon reception + * of RSTACT during current frame. + * @rmtoll DEVR0 RSTVAL LL_I3C_IsEnabledReset + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledReset(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->DEVR0, I3C_DEVR0_RSTVAL) == (I3C_DEVR0_RSTVAL)) ? 1UL : 0UL); +} + +/** + * @brief Configure peripheral mode. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * @rmtoll CFGR CRINIT LL_I3C_SetMode + * @param I3Cx I3C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I3C_MODE_CONTROLLER + * @arg @ref LL_I3C_MODE_TARGET + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMode(I3C_TypeDef *I3Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I3Cx->CFGR, I3C_CFGR_CRINIT, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @rmtoll CFGR CRINIT LL_I3C_GetMode + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_MODE_CONTROLLER + * @arg @ref LL_I3C_MODE_TARGET + */ +__STATIC_INLINE uint32_t LL_I3C_GetMode(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)((READ_BIT(I3Cx->CFGR, I3C_CFGR_CRINIT) == (I3C_CFGR_CRINIT)) ? 1UL : 0UL); +} + +/** + * @brief An arbitration header (7'h7E) is sent after Start in case of legacy I2C or I3C private transfers. + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR NOARBH LL_I3C_EnableArbitrationHeader + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableArbitrationHeader(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_NOARBH); +} + +/** + * @brief Target address is sent directly after a Start in case of legacy I2C or I3C private transfers. + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR NOARBH LL_I3C_DisableArbitrationHeader + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableArbitrationHeader(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_NOARBH); +} + +/** + * @brief Check if the arbitration header is enabled of disabled. + * @rmtoll CFGR NOARBH LL_I3C_IsEnabledArbitrationHeader + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledArbitrationHeader(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_NOARBH) == (I3C_CFGR_NOARBH)) ? 0UL : 1UL); +} + +/** + * @brief A Reset Pattern is inserted before the STOP at the end of a frame when the last CCC + * of the frame was RSTACT CCC. + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR RSTPTRN LL_I3C_EnableResetPattern + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableResetPattern(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_RSTPTRN); +} + +/** + * @brief A single STOP is emitted at the end of a frame. + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR RSTPTRN LL_I3C_DisableResetPattern + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableResetPattern(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_RSTPTRN); +} + +/** + * @brief Check if Reset Pattern is enabled of disabled. + * @rmtoll CFGR RSTPTRN LL_I3C_IsEnabledResetPattern + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledResetPattern(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_RSTPTRN) == (I3C_CFGR_RSTPTRN)) ? 1UL : 0UL); +} + +/** + * @brief An Exit Pattern is sent after header (MTYPE = header) to program an escalation fault. + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR EXITPTRN LL_I3C_EnableExitPattern + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableExitPattern(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_EXITPTRN); +} + +/** + * @brief An Exit Pattern is not sent after header (MTYPE = header). + * @note This bit can be modified only when there is no frame ongoing + * @rmtoll CFGR EXITPTRN LL_I3C_DisableExitPattern + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableExitPattern(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_EXITPTRN); +} + +/** + * @brief Check if Exit Pattern is enabled or disabled. + * @rmtoll CFGR EXITPTRN LL_I3C_IsEnabledExitPattern + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledExitPattern(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_EXITPTRN) == (I3C_CFGR_EXITPTRN)) ? 1UL : 0UL); +} + +/** + * @brief High Keeper is enabled and will be used in place of standard Open drain Pull Up device + * during handoff procedures. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * @rmtoll CFGR HKSDAEN LL_I3C_EnableHighKeeperSDA + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableHighKeeperSDA(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_HKSDAEN); +} + +/** + * @brief High Keeper is disabled. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * @rmtoll CFGR HKSDAEN LL_I3C_DisableHighKeeperSDA + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableHighKeeperSDA(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_HKSDAEN); +} + +/** + * @brief Check if High Keeper is enabled or disabled. + * @rmtoll CFGR HKSDAEN LL_I3C_IsEnabledHighKeeperSDA + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledHighKeeperSDA(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_HKSDAEN) == (I3C_CFGR_HKSDAEN)) ? 1UL : 0UL); +} + +/** + * @brief Hot Join Request is Acked. Current frame on the bus is continued. + * An Hot Join interrupt is sent through HJF flag. + * @note This bit can be used when I3C is acting as a Controller. + * @rmtoll CFGR HJACK LL_I3C_EnableHJAck + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableHJAck(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_HJACK); +} + +/** + * @brief Hot Join Request is Nacked. Current frame on the bus is continued. + * No Hot Join interrupt is generated. + * @note This bit can be used when I3C is acting as a Controller. + * @rmtoll CFGR HJACK LL_I3C_DisableHJAck + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableHJAck(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_HJACK); +} + +/** + * @brief Check if Hot Join Request Acknowledgement is enabled or disabled. + * @rmtoll CFGR HJACK LL_I3C_IsEnabledHJAck + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledHJAck(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_HJACK) == (I3C_CFGR_HJACK)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TDR TDB0 LL_I3C_DMA_GetRegAddr\n + * TDWR TDWR LL_I3C_DMA_GetRegAddr\n + * RDR RXRB0 LL_I3C_DMA_GetRegAddr\n + * RDWR RDWR LL_I3C_DMA_GetRegAddr\n + * SR SR LL_I3C_DMA_GetRegAddr\n + * CR CR LL_I3C_DMA_GetRegAddr + * @param I3Cx I3C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I3C_DMA_REG_DATA_TRANSMIT_BYTE + * @arg @ref LL_I3C_DMA_REG_DATA_RECEIVE_BYTE + * @arg @ref LL_I3C_DMA_REG_DATA_TRANSMIT_WORD + * @arg @ref LL_I3C_DMA_REG_DATA_RECEIVE_WORD + * @arg @ref LL_I3C_DMA_REG_STATUS + * @arg @ref LL_I3C_DMA_REG_CONTROL + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I3C_DMA_GetRegAddr(const I3C_TypeDef *I3Cx, uint32_t Direction) +{ + register uint32_t data_reg_addr; + + if (Direction == LL_I3C_DMA_REG_DATA_TRANSMIT_BYTE) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(I3Cx->TDR); + } + else if (Direction == LL_I3C_DMA_REG_DATA_RECEIVE_BYTE) + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(I3Cx->RDR); + } + else if (Direction == LL_I3C_DMA_REG_DATA_TRANSMIT_WORD) + { + /* return address of TDWR register */ + data_reg_addr = (uint32_t) &(I3Cx->TDWR); + } + else if (Direction == LL_I3C_DMA_REG_DATA_RECEIVE_WORD) + { + /* return address of RDWR register */ + data_reg_addr = (uint32_t) &(I3Cx->RDWR); + } + else if (Direction == LL_I3C_DMA_REG_STATUS) + { + /* return address of SR register */ + data_reg_addr = (uint32_t) &(I3Cx->SR); + } + else + { + /* return address of CR register */ + data_reg_addr = (uint32_t) &(I3Cx->CR); + } + + return data_reg_addr; +} + +/** + * @brief Enable DMA FIFO reception requests. + * @rmtoll CFGR RXDMAEN LL_I3C_EnableDMAReq_RX + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableDMAReq_RX(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_RXDMAEN); +} + +/** + * @brief Disable DMA FIFO reception requests. + * @rmtoll CFGR RXDMAEN LL_I3C_DisableDMAReq_RX + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableDMAReq_RX(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_RXDMAEN); +} + +/** + * @brief Check if DMA FIFO reception requests are enabled or disabled. + * @rmtoll CFGR RXDMAEN LL_I3C_IsEnabledDMAReq_RX + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledDMAReq_RX(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_RXDMAEN) == (I3C_CFGR_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the Receive FIFO Threshold level. + * @rmtoll CFGR RXTHRES LL_I3C_SetRxFIFOThreshold + * @param I3Cx I3C Instance. + * @param RxFIFOThreshold This parameter can be one of the following values: + * @arg @ref LL_I3C_RXFIFO_THRESHOLD_1_4 + * @arg @ref LL_I3C_RXFIFO_THRESHOLD_4_4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetRxFIFOThreshold(I3C_TypeDef *I3Cx, uint32_t RxFIFOThreshold) +{ + MODIFY_REG(I3Cx->CFGR, I3C_CFGR_RXTHRES, RxFIFOThreshold); +} + +/** + * @brief Get the Receive FIFO Threshold level. + * @rmtoll CFGR RXTHRES LL_I3C_GetRxFIFOThreshold + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_RXFIFO_THRESHOLD_1_4 + * @arg @ref LL_I3C_RXFIFO_THRESHOLD_4_4 + */ +__STATIC_INLINE uint32_t LL_I3C_GetRxFIFOThreshold(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->CFGR, I3C_CFGR_RXTHRES)); +} + +/** + * @brief Enable DMA FIFO transmission requests. + * @rmtoll CFGR TXDMAEN LL_I3C_EnableDMAReq_TX + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableDMAReq_TX(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_TXDMAEN); +} + +/** + * @brief Disable DMA FIFO transmission requests. + * @rmtoll CFGR TXDMAEN LL_I3C_DisableDMAReq_TX + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableDMAReq_TX(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_TXDMAEN); +} + +/** + * @brief Check if DMA FIFO transmission requests are enabled or disabled. + * @rmtoll CFGR TXDMAEN LL_I3C_IsEnabledDMAReq_TX + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledDMAReq_TX(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_TXDMAEN) == (I3C_CFGR_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the Transmit FIFO Threshold level. + * @rmtoll CFGR TXTHRES LL_I3C_SetTxFIFOThreshold + * @param I3Cx I3C Instance. + * @param TxFIFOThreshold This parameter can be one of the following values: + * @arg @ref LL_I3C_TXFIFO_THRESHOLD_1_4 + * @arg @ref LL_I3C_TXFIFO_THRESHOLD_4_4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetTxFIFOThreshold(I3C_TypeDef *I3Cx, uint32_t TxFIFOThreshold) +{ + MODIFY_REG(I3Cx->CFGR, I3C_CFGR_TXTHRES, TxFIFOThreshold); +} + +/** + * @brief Get the Transmit FIFO Threshold level. + * @rmtoll CFGR TXTHRES LL_I3C_GetTxFIFOThreshold + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_TXFIFO_THRESHOLD_1_4 + * @arg @ref LL_I3C_TXFIFO_THRESHOLD_4_4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_GetTxFIFOThreshold(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->CFGR, I3C_CFGR_TXTHRES)); +} + +/** + * @brief Enable DMA FIFO Status requests. + * @rmtoll CFGR SDMAEN LL_I3C_EnableDMAReq_Status + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableDMAReq_Status(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_SDMAEN); +} + +/** + * @brief Disable DMA FIFO Status requests. + * @rmtoll CFGR SDMAEN LL_I3C_DisableDMAReq_Status + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableDMAReq_Status(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_SDMAEN); +} + +/** + * @brief Check if DMA FIFO Status requests are enabled or disabled. + * @rmtoll CFGR SDMAEN LL_I3C_IsEnabledDMAReq_Status + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledDMAReq_Status(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_SDMAEN) == (I3C_CFGR_SDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Status FIFO. + * @note Not applicable in target mode. Status FIFO always disabled in target mode. + * @rmtoll CFGR SMODE LL_I3C_EnableStatusFIFO + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableStatusFIFO(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_SMODE); +} + +/** + * @brief Disable the Status FIFO Threshold. + * @rmtoll CFGR SMODE LL_I3C_DisableStatusFIFO + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableStatusFIFO(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_SMODE); +} + +/** + * @brief Check if the Status FIFO Threshold is enabled or disabled. + * @rmtoll CFGR SMODE LL_I3C_IsEnabledStatusFIFO + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledStatusFIFO(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_SMODE) == (I3C_CFGR_SMODE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Control and Transmit FIFO preloaded before starting a transfer on I3C bus. + * @note Not applicable in target mode. Control FIFO always disabled in target mode. + * @rmtoll CFGR TMODE LL_I3C_EnableControlFIFO + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableControlFIFO(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_TMODE); +} + +/** + * @brief Disable the Control and Transmit FIFO preloaded before starting a transfer on I3C bus. + * @rmtoll CFGR TMODE LL_I3C_DisableControlFIFO + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableControlFIFO(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_TMODE); +} + +/** + * @brief Check if the Control and Transmit FIFO preloaded is enabled or disabled. + * @rmtoll CFGR TMODE LL_I3C_IsEnabledControlFIFO + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledControlFIFO(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_TMODE) == (I3C_CFGR_TMODE)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA FIFO Control word transfer requests. + * @rmtoll CFGR CDMAEN LL_I3C_EnableDMAReq_Control + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableDMAReq_Control(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_CDMAEN); +} + +/** + * @brief Disable DMA FIFO Control word transfer requests. + * @rmtoll CFGR CDMAEN LL_I3C_DisableDMAReq_Control + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableDMAReq_Control(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->CFGR, I3C_CFGR_CDMAEN); +} + +/** + * @brief Check if DMA FIFO Control word transfer requests are enabled or disabled. + * @rmtoll CFGR CDMAEN LL_I3C_IsEnabledDMAReq_Control + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledDMAReq_Control(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->CFGR, I3C_CFGR_CDMAEN) == (I3C_CFGR_CDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Own Dynamic Address as Valid. + * @rmtoll DEVR0 DAVAL LL_I3C_EnableOwnDynAddress + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableOwnDynAddress(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->DEVR0, I3C_DEVR0_DAVAL); +} + +/** + * @brief Set Own Dynamic Address as Not-Valid. + * @rmtoll DEVR0 DAVAL LL_I3C_DisableOwnDynAddress + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableOwnDynAddress(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->DEVR0, I3C_DEVR0_DAVAL); +} + +/** + * @brief Check if Own Dynamic address is Valid or Not-Valid. + * @rmtoll DEVR0 DAVAL LL_I3C_IsEnabledOwnDynAddress + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledOwnDynAddress(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->DEVR0, I3C_DEVR0_DAVAL) == (I3C_DEVR0_DAVAL)) ? 1UL : 0UL); +} + +/** + * @brief Configure Own Dynamic Address. + * @note This bit can be programmed in controller mode or during Dynamic Address procedure from current controller. + * @rmtoll DEVR0 DA LL_I3C_SetOwnDynamicAddress + * @param I3Cx I3C Instance. + * @param OwnDynamicAddress This parameter must be a value between Min_Data=0 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetOwnDynamicAddress(I3C_TypeDef *I3Cx, uint32_t OwnDynamicAddress) +{ + MODIFY_REG(I3Cx->DEVR0, I3C_DEVR0_DA, (OwnDynamicAddress << I3C_DEVR0_DA_Pos)); +} + +/** + * @brief Get Own Dynamic Address. + * @rmtoll DEVR0 DA LL_I3C_GetOwnDynamicAddress + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0x7F + */ +__STATIC_INLINE uint8_t LL_I3C_GetOwnDynamicAddress(const I3C_TypeDef *I3Cx) +{ + return (uint8_t)(READ_BIT(I3Cx->DEVR0, I3C_DEVR0_DA) >> I3C_DEVR0_DA_Pos); +} + +/** + * @brief Set IBI procedure allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 IBIEN LL_I3C_EnableIBI + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIBI(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->DEVR0, I3C_DEVR0_IBIEN); +} + +/** + * @brief Set IBI procedure not-allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 IBIEN LL_I3C_DisableIBI + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIBI(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->DEVR0, I3C_DEVR0_IBIEN); +} + +/** + * @brief Check if IBI procedure is allowed or not allowed. + * @rmtoll DEVR0 IBIEN LL_I3C_IsEnabledIBI + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIBI(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->DEVR0, I3C_DEVR0_IBIEN) == (I3C_DEVR0_IBIEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Controller-role Request allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 CREN LL_I3C_EnableControllerRoleReq + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableControllerRoleReq(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->DEVR0, I3C_DEVR0_CREN); +} + +/** + * @brief Set Controller-role Request as not-allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 CREN LL_I3C_DisableControllerRoleReq + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableControllerRoleReq(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->DEVR0, I3C_DEVR0_CREN); +} + +/** + * @brief Check if Controller-role Request is allowed or not-allowed. + * @rmtoll DEVR0 CREN LL_I3C_IsEnabledControllerRoleReq + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledControllerRoleReq(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->DEVR0, I3C_DEVR0_CREN) == (I3C_DEVR0_CREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Hot Join allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 HJEN LL_I3C_EnableHotJoin + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableHotJoin(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->DEVR0, I3C_DEVR0_HJEN); +} + +/** + * @brief Set Hot Join as not-allowed (when the I3C is acting as target). + * @note This bit can be programmed when the I3C is disabled (EN = 0) or updated by HW upon reception of DISEC CCC. + * @rmtoll DEVR0 HJEN LL_I3C_DisableHotJoin + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableHotJoin(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->DEVR0, I3C_DEVR0_HJEN); +} + +/** + * @brief Check if Hot Join is allowed or not-allowed. + * @rmtoll DEVR0 HJEN LL_I3C_IsEnabledHotJoin + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledHotJoin(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->DEVR0, I3C_DEVR0_HJEN) == (I3C_DEVR0_HJEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure Maximum Read Length (target mode). + * @note Those bits can be updated by HW upon reception of GETMRL CCC. + * @rmtoll MAXRLR MRL LL_I3C_SetMaxReadLength + * @param I3Cx I3C Instance. + * @param MaxReadLength This parameter must be a value between Min_Data=0x0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMaxReadLength(I3C_TypeDef *I3Cx, uint16_t MaxReadLength) +{ + MODIFY_REG(I3Cx->MAXRLR, I3C_MAXRLR_MRL, MaxReadLength); +} + +/** + * @brief Return Maximum Read Length (target mode). + * @rmtoll MAXRLR MRL LL_I3C_GetMaxReadLength + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFFFFF + */ +__STATIC_INLINE uint32_t LL_I3C_GetMaxReadLength(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->MAXRLR, I3C_MAXRLR_MRL)); +} + +/** + * @brief Configure the number of additional Mandatory Data Byte (MDB) sent to the controller + * after an acknowledge of the IBI (target mode). + * @rmtoll MAXRLR IBIP LL_I3C_ConfigNbIBIAddData + * @param I3Cx I3C Instance. + * @param NbIBIAddData This parameter can be one of the following values: + * @arg @ref LL_I3C_PAYLOAD_EMPTY + * @arg @ref LL_I3C_PAYLOAD_1_BYTE + * @arg @ref LL_I3C_PAYLOAD_2_BYTES + * @arg @ref LL_I3C_PAYLOAD_3_BYTES + * @arg @ref LL_I3C_PAYLOAD_4_BYTES + * @retval None + */ +__STATIC_INLINE void LL_I3C_ConfigNbIBIAddData(I3C_TypeDef *I3Cx, uint32_t NbIBIAddData) +{ + MODIFY_REG(I3Cx->MAXRLR, I3C_MAXRLR_IBIP, NbIBIAddData); +} + +/** + * @brief Return the number of additional Mandatory Data Byte (MDB) sent to the controller + * after an acknowledge of the IBI (target mode). + * @rmtoll MAXRLR IBIP LL_I3C_GetConfigNbIBIAddData + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_PAYLOAD_EMPTY + * @arg @ref LL_I3C_PAYLOAD_1_BYTE + * @arg @ref LL_I3C_PAYLOAD_2_BYTES + * @arg @ref LL_I3C_PAYLOAD_3_BYTES + * @arg @ref LL_I3C_PAYLOAD_4_BYTES + */ +__STATIC_INLINE uint32_t LL_I3C_GetConfigNbIBIAddData(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->MAXRLR, I3C_MAXRLR_IBIP)); +} + +/** + * @brief Configure Maximum Write Length (target mode). + * @note Those bits can be updated by HW upon reception of GETMWL CCC. + * @rmtoll MAXWLR MWL LL_I3C_SetMaxWriteLength + * @param I3Cx I3C Instance. + * @param MaxWriteLength This parameter must be a value between Min_Data=0x0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMaxWriteLength(I3C_TypeDef *I3Cx, uint16_t MaxWriteLength) +{ + MODIFY_REG(I3Cx->MAXWLR, I3C_MAXWLR_MWL, MaxWriteLength); +} + +/** + * @brief Return Maximum Write Length (target mode). + * @rmtoll MAXWLR MWL LL_I3C_GetMaxWriteLength + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFFFFF + */ +__STATIC_INLINE uint32_t LL_I3C_GetMaxWriteLength(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->MAXWLR, I3C_MAXWLR_MWL)); +} + +/** + * @brief Configure the SCL clock signal waveform. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR0 TIMINGR0 LL_I3C_ConfigClockWaveForm + * @param I3Cx I3C Instance. + * @param ClockWaveForm This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ConfigClockWaveForm(I3C_TypeDef *I3Cx, uint32_t ClockWaveForm) +{ + WRITE_REG(I3Cx->TIMINGR0, ClockWaveForm); +} + +/** + * @brief Get the SCL clock signal waveform. + * @rmtoll TIMINGR0 TIMINGR0 LL_I3C_GetClockWaveForm + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetClockWaveForm(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_REG(I3Cx->TIMINGR0)); +} + +/** + * @brief Configure the SCL clock low period during I3C push-pull phases. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR0 SCLL_PP LL_I3C_SetPeriodClockLowPP + * @param I3Cx I3C Instance. + * @param PeriodClockLowPP This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetPeriodClockLowPP(I3C_TypeDef *I3Cx, uint32_t PeriodClockLowPP) +{ + MODIFY_REG(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLL_PP, (PeriodClockLowPP << I3C_TIMINGR0_SCLL_PP_Pos)); +} + +/** + * @brief Get the SCL clock low period during I3C push-pull phases. + * @rmtoll TIMINGR0 SCLL_PP LL_I3C_GetPeriodClockLowPP + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetPeriodClockLowPP(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLL_PP) >> I3C_TIMINGR0_SCLL_PP_Pos); +} + +/** + * @brief Configure the SCL clock High period during I3C open drain and push-pull phases. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR0 SCLH_I3C LL_I3C_SetPeriodClockHighI3C + * @param I3Cx I3C Instance. + * @param PeriodClockHighI3C This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetPeriodClockHighI3C(I3C_TypeDef *I3Cx, uint32_t PeriodClockHighI3C) +{ + MODIFY_REG(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLH_I3C, (PeriodClockHighI3C << I3C_TIMINGR0_SCLH_I3C_Pos)); +} + +/** + * @brief Get the SCL clock high period during I3C open drain and push-pull phases. + * @rmtoll TIMINGR0 SCLH_I3C LL_I3C_GetPeriodClockHighI3C + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetPeriodClockHighI3C(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLH_I3C) >> I3C_TIMINGR0_SCLH_I3C_Pos); +} + +/** + * @brief Configure the SCL clock low period during I3C open drain phases. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR0 SCLL_OD LL_I3C_SetPeriodClockLowOD + * @param I3Cx I3C Instance. + * @param PeriodClockLowOD This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetPeriodClockLowOD(I3C_TypeDef *I3Cx, uint32_t PeriodClockLowOD) +{ + MODIFY_REG(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLL_OD, (PeriodClockLowOD << I3C_TIMINGR0_SCLL_OD_Pos)); +} + +/** + * @brief Get the SCL clock low period during I3C open phases. + * @rmtoll TIMINGR0 SCLL_OD LL_I3C_GetPeriodClockLowOD + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetPeriodClockLowOD(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLL_OD) >> I3C_TIMINGR0_SCLL_OD_Pos); +} + +/** + * @brief Configure the SCL clock High period during I2C open drain phases. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR0 SCLH_I2C LL_I3C_SetPeriodClockHighI2C + * @param I3Cx I3C Instance. + * @param PeriodClockHighI2C This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetPeriodClockHighI2C(I3C_TypeDef *I3Cx, uint32_t PeriodClockHighI2C) +{ + MODIFY_REG(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLH_I2C, PeriodClockHighI2C << I3C_TIMINGR0_SCLH_I2C_Pos); +} + +/** + * @brief Get the SCL clock high period during I2C open drain phases. + * @rmtoll TIMINGR0 SCLH_I2C LL_I3C_GetPeriodClockHighI2C + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetPeriodClockHighI2C(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR0, I3C_TIMINGR0_SCLH_I2C) >> I3C_TIMINGR0_SCLH_I2C_Pos); +} + +/** + * @brief Configure the Controller additional hold time on SDA line. + * @rmtoll TIMINGR1 SDA_HD LL_I3C_SetDataHoldTime + * @param I3Cx I3C Instance. + * @param DataHoldTime This parameter can be one of the following values: + * @arg @ref LL_I3C_SDA_HOLD_TIME_0_5 + * @arg @ref LL_I3C_SDA_HOLD_TIME_1_5 + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDataHoldTime(I3C_TypeDef *I3Cx, uint32_t DataHoldTime) +{ + MODIFY_REG(I3Cx->TIMINGR1, I3C_TIMINGR1_SDA_HD, DataHoldTime); +} + +/** + * @brief Get the Controller additional hold time on SDA line. + * @rmtoll TIMINGR1 SDA_HD LL_I3C_GetDataHoldTime + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_SDA_HOLD_TIME_0_5 + * @arg @ref LL_I3C_SDA_HOLD_TIME_1_5 + */ +__STATIC_INLINE uint32_t LL_I3C_GetDataHoldTime(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR1, I3C_TIMINGR1_SDA_HD)); +} + +/** + * @brief Configure the Idle, Available state. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR1 AVAL LL_I3C_SetAvalTiming + * @param I3Cx I3C Instance. + * @param AvalTiming This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetAvalTiming(I3C_TypeDef *I3Cx, uint32_t AvalTiming) +{ + MODIFY_REG(I3Cx->TIMINGR1, I3C_TIMINGR1_AVAL, (AvalTiming << I3C_TIMINGR1_AVAL_Pos)); +} + +/** + * @brief Get the Idle, Available integer value state. + * @rmtoll TIMINGR1 AVAL LL_I3C_GetAvalTiming + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetAvalTiming(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR1, I3C_TIMINGR1_AVAL) >> I3C_TIMINGR1_AVAL_Pos); +} + +/** + * @brief Configure the Free state. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR1 FREE LL_I3C_SetFreeTiming + * @param I3Cx I3C Instance. + * @param FreeTiming This parameter must be a value between Min_Data=0 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetFreeTiming(I3C_TypeDef *I3Cx, uint32_t FreeTiming) +{ + MODIFY_REG(I3Cx->TIMINGR1, I3C_TIMINGR1_FREE, (FreeTiming << I3C_TIMINGR1_FREE_Pos)); +} + +/** + * @brief Get the Free integeter value state. + * @rmtoll TIMINGR1 FREE LL_I3C_GetFreeTiming + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0x3F. + */ +__STATIC_INLINE uint32_t LL_I3C_GetFreeTiming(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR1, I3C_TIMINGR1_FREE) >> I3C_TIMINGR1_FREE_Pos); +} + +/** + * @brief Configure the activity state of the new controller. + * @note Refer to MIPI I3C specification (https:__www.mipi.org_specifications) + * for more details related to Activity State. + * @rmtoll TIMINGR1 ASNCR LL_I3C_SetControllerActivityState + * @param I3Cx I3C Instance. + * @param ControllerActivityState This parameter can be one of the following values: + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_0 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_1 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_2 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_3 + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetControllerActivityState(I3C_TypeDef *I3Cx, uint32_t ControllerActivityState) +{ + MODIFY_REG(I3Cx->TIMINGR1, I3C_TIMINGR1_ASNCR, ControllerActivityState); +} + +/** + * @brief Get the activity state of the new controller. + * @note Refer to MIPI I3C specification (https:__www.mipi.org_specifications) + * for more details related to Activity State. + * @rmtoll TIMINGR1 ASNCR LL_I3C_GetControllerActivityState + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_0 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_1 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_2 + * @arg @ref LL_I3C_OWN_ACTIVITY_STATE_3 + */ +__STATIC_INLINE uint32_t LL_I3C_GetControllerActivityState(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR1, I3C_TIMINGR1_ASNCR)); +} + +/** + * @brief Configure the Controller SDA Hold time, Bus Free, Activity state, Idle state. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR1 SDA_HD LL_I3C_SetCtrlBusCharacteristic\n + * TIMINGR1 FREE LL_I3C_SetCtrlBusCharacteristic\n + * TIMINGR1 ASNCR LL_I3C_SetCtrlBusCharacteristic\n + * TIMINGR1 IDLE LL_I3C_SetCtrlBusCharacteristic + * @param I3Cx I3C Instance. + * @param CtrlBusCharacteristic This parameter must be a value between Min_Data=0 and Max_Data=0x107F03FF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetCtrlBusCharacteristic(I3C_TypeDef *I3Cx, uint32_t CtrlBusCharacteristic) +{ + WRITE_REG(I3Cx->TIMINGR1, CtrlBusCharacteristic); +} + +/** + * @brief Get the Controller SDA Hold time, Bus Free, Activity state, Idle state. + * @rmtoll TIMINGR1 SDA_HD LL_I3C_GetCtrlBusCharacteristic\n + * TIMINGR1 FREE LL_I3C_GetCtrlBusCharacteristic\n + * TIMINGR1 ASNCR LL_I3C_GetCtrlBusCharacteristic\n + * TIMINGR1 IDLE LL_I3C_GetCtrlBusCharacteristic + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0x107F03FF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetCtrlBusCharacteristic(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_REG(I3Cx->TIMINGR1)); +} + +/** + * @brief Configure the Target Available state. + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR1 IDLE LL_I3C_SetTgtBusCharacteristic + * @param I3Cx I3C Instance. + * @param TgtBusCharacteristic This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetTgtBusCharacteristic(I3C_TypeDef *I3Cx, uint32_t TgtBusCharacteristic) +{ + MODIFY_REG(I3Cx->TIMINGR1, I3C_TIMINGR1_AVAL, (TgtBusCharacteristic & I3C_TIMINGR1_AVAL)); +} + +/** + * @brief Get the Target Available state. + * @rmtoll TIMINGR1 IDLE LL_I3C_GetTgtBusCharacteristic + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetTgtBusCharacteristic(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR1, I3C_TIMINGR1_AVAL)); +} + +/** + * @brief Configure the SCL clock stalling time on I3C Bus (controller mode). + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note This parameter is computed with the STM32CubeMX Tool. + * @rmtoll TIMINGR2 STALL LL_I3C_SetStallTime + * @param I3Cx I3C Instance. + * @param ControllerStallTime This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetStallTime(I3C_TypeDef *I3Cx, uint32_t ControllerStallTime) +{ + MODIFY_REG(I3Cx->TIMINGR2, I3C_TIMINGR2_STALL, (ControllerStallTime << I3C_TIMINGR2_STALL_Pos)); +} + +/** + * @brief Get the SCL clock stalling time on I3C Bus (controller mode). + * @rmtoll TIMINGR2 STALL LL_I3C_GetStallTime + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetStallTime(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALL)); +} + +/** + * @brief Set stall on ACK bit (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLA LL_I3C_EnableStallACK + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableStallACK(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLA); +} + +/** + * @brief Disable stall on ACK bit (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLA LL_I3C_DisableStallACK + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableStallACK(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLA); +} + +/** + * @brief Check if stall on ACK bit is enabled or disabled (controller mode). + * @rmtoll TIMINGR2 STALLA LL_I3C_IsEnabledStallACK + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledStallACK(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLA) == (I3C_TIMINGR2_STALLA)) ? 1UL : 0UL); +} + +/** + * @brief Set stall on Parity bit of Command Code byte (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLC LL_I3C_EnableStallParityCCC + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableStallParityCCC(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLC); +} + +/** + * @brief Disable stall on Parity bit of Command Code byte (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLC LL_I3C_DisableStallParityCCC + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableStallParityCCC(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLC); +} + +/** + * @brief Check if stall on Parity bit of Command Code byte is enabled or disabled (controller mode). + * @rmtoll TIMINGR2 STALLC LL_I3C_IsEnabledStallParityCCC + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledStallParityCCC(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLC) == (I3C_TIMINGR2_STALLC)) ? 1UL : 0UL); +} + +/** + * @brief Set stall on Parity bit of Data bytes (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLD LL_I3C_EnableStallParityData + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableStallParityData(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLD); +} + +/** + * @brief Disable stall on Parity bit of Data bytes (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLD LL_I3C_DisableStallParityData + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableStallParityData(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLD); +} + +/** + * @brief Check if stall on Parity bit of Data bytes is enabled or disabled (controller mode). + * @rmtoll TIMINGR2 STALLD LL_I3C_IsEnabledStallParityData + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledStallParityData(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLD) == (I3C_TIMINGR2_STALLD)) ? 1UL : 0UL); +} + +/** + * @brief Set stall on T bit (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLT LL_I3C_EnableStallTbit + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableStallTbit(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLT); +} + +/** + * @brief Disable stall on T bit (controller mode). + * @note This bit can be programmed when the I3C is disabled (EN = 0). + * @rmtoll TIMINGR2 STALLT LL_I3C_DisableStallTbit + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableStallTbit(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLT); +} + +/** + * @brief Check if stall on T bit is enabled or disabled (controller mode). + * @rmtoll TIMINGR2 STALLT LL_I3C_IsEnabledStallTbit + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledStallTbit(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->TIMINGR2, I3C_TIMINGR2_STALLT) == (I3C_TIMINGR2_STALLT)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Device Capability on Bus as Target or Controller (MIPI Bus Characteristics Register BCR6). + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll BCR BCR6 LL_I3C_SetDeviceCapabilityOnBus + * @param I3Cx I3C Instance. + * @param DeviceCapabilityOnBus This parameter can be one of the following values: + * @arg @ref LL_I3C_DEVICE_ROLE_AS_TARGET + * @arg @ref LL_I3C_DEVICE_ROLE_AS_CONTROLLER + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDeviceCapabilityOnBus(I3C_TypeDef *I3Cx, uint32_t DeviceCapabilityOnBus) +{ + MODIFY_REG(I3Cx->BCR, I3C_BCR_BCR6, DeviceCapabilityOnBus); +} + +/** + * @brief Get the Device Capability on Bus as Target or Controller (MIPI Bus Characteristics Register BCR6). + * @rmtoll BCR BCR6 LL_I3C_GetDeviceCapabilityOnBus + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_DEVICE_ROLE_AS_TARGET + * @arg @ref LL_I3C_DEVICE_ROLE_AS_CONTROLLER + */ +__STATIC_INLINE uint32_t LL_I3C_GetDeviceCapabilityOnBus(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->BCR, I3C_BCR_BCR6)); +} + +/** + * @brief Configure the Device IBI Payload (MIPI Bus Characteristics Register BCR2). + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll BCR BCR2 LL_I3C_SetDeviceIBIPayload + * @param I3Cx I3C Instance. + * @param DeviceIBIPayload This parameter can be one of the following values: + * @arg @ref LL_I3C_IBI_NO_ADDITIONAL_DATA + * @arg @ref LL_I3C_IBI_ADDITIONAL_DATA + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDeviceIBIPayload(I3C_TypeDef *I3Cx, uint32_t DeviceIBIPayload) +{ + MODIFY_REG(I3Cx->BCR, I3C_BCR_BCR2, DeviceIBIPayload); +} + +/** + * @brief Get the Device IBI Payload (MIPI Bus Characteristics Register BCR2). + * @rmtoll BCR BCR2 LL_I3C_GetDeviceIBIPayload + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_IBI_NO_ADDITIONAL_DATA + * @arg @ref LL_I3C_IBI_ADDITIONAL_DATA + */ +__STATIC_INLINE uint32_t LL_I3C_GetDeviceIBIPayload(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->BCR, I3C_BCR_BCR2)); +} + +/** + * @brief Configure the Data Speed Limitation (limitation, as described by I3C_GETMXDSR). + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll BCR BCR0 LL_I3C_SetDataSpeedLimitation + * @param I3Cx I3C Instance. + * @param DataSpeedLimitation This parameter can be one of the following values: + * @arg @ref LL_I3C_NO_DATA_SPEED_LIMITATION + * @arg @ref LL_I3C_MAX_DATA_SPEED_LIMITATION + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDataSpeedLimitation(I3C_TypeDef *I3Cx, uint32_t DataSpeedLimitation) +{ + MODIFY_REG(I3Cx->BCR, I3C_BCR_BCR0, DataSpeedLimitation); +} + +/** + * @brief Get the Data Speed Limitation (limitation, as described by I3C_GETMXDSR). + * @rmtoll BCR BCR0 LL_I3C_GetDataSpeedLimitation + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_NO_DATA_SPEED_LIMITATION + * @arg @ref LL_I3C_MAX_DATA_SPEED_LIMITATION + */ +__STATIC_INLINE uint32_t LL_I3C_GetDataSpeedLimitation(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->BCR, I3C_BCR_BCR0)); +} + +/** + * @brief Configure the Device Characteristics Register (DCR). + * @note This bit can only be programmed when the I3C is disabled (EN = 0). + * + * @note Refer MIPI web site for the list of device code available. + * @rmtoll DCR DC LL_I3C_SetDeviceCharacteristics + * @param I3Cx I3C Instance. + * @param DeviceCharacteristics This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDeviceCharacteristics(I3C_TypeDef *I3Cx, uint32_t DeviceCharacteristics) +{ + MODIFY_REG(I3Cx->DCR, I3C_DCR_DCR, DeviceCharacteristics); +} + +/** + * @brief Get the Device Characteristics Register (DCR). + * @note Refer MIPI web site to associated value with the list of device code available. + * @rmtoll DCR DCR LL_I3C_GetDeviceCharacteristics + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetDeviceCharacteristics(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->DCR, I3C_DCR_DCR)); +} + +/** + * @brief Configure IBI MDB support for pending read notification. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll GETCAPR CAPPEND LL_I3C_SetPendingReadMDB + * @param I3Cx I3C Instance. + * @param PendingReadMDB This parameter can be one of the following values: + * @arg @ref LL_I3C_MDB_NO_PENDING_READ_NOTIFICATION + * @arg @ref LL_I3C_MDB_PENDING_READ_NOTIFICATION + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetPendingReadMDB(I3C_TypeDef *I3Cx, uint32_t PendingReadMDB) +{ + MODIFY_REG(I3Cx->GETCAPR, I3C_GETCAPR_CAPPEND, PendingReadMDB); +} + +/** + * @brief Get IBI MDB support for pending read notification value. + * @rmtoll GETCAPR CAPPEND LL_I3C_GetPendingReadMDB + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_MDB_NO_PENDING_READ_NOTIFICATION + * @arg @ref LL_I3C_MDB_PENDING_READ_NOTIFICATION + */ +__STATIC_INLINE uint32_t LL_I3C_GetPendingReadMDB(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->GETCAPR, I3C_GETCAPR_CAPPEND)); +} + +/** + * @brief Configure the Group Management Support bit of MSTCAP1. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll CRCAPR CAPGRP LL_I3C_SetGrpAddrHandoffSupport + * @param I3Cx I3C Instance. + * @param GrpAddrHandoffSupport This parameter can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_GRP_ADDR_NOT_SUPPORTED + * @arg @ref LL_I3C_HANDOFF_GRP_ADDR_SUPPORTED + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetGrpAddrHandoffSupport(I3C_TypeDef *I3Cx, uint32_t GrpAddrHandoffSupport) +{ + MODIFY_REG(I3Cx->CRCAPR, I3C_CRCAPR_CAPGRP, GrpAddrHandoffSupport); +} + +/** + * @brief Get the Group Management Support bit of MSTCAP1. + * @rmtoll CRCAPR CAPGRP LL_I3C_GetGrpAddrHandoffSupport + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_GRP_ADDR_NOT_SUPPORTED + * @arg @ref LL_I3C_HANDOFF_GRP_ADDR_SUPPORTED + */ +__STATIC_INLINE uint32_t LL_I3C_GetGrpAddrHandoffSupport(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->CRCAPR, I3C_CRCAPR_CAPGRP)); +} + +/** + * @brief Configure the Delayed Controller Handoff bit in MSTCAP2. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll CRCAPR CAPDHOFF LL_I3C_SetControllerHandoffDelayed + * @param I3Cx I3C Instance. + * @param ControllerHandoffDelayed This parameter can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_NOT_DELAYED + * @arg @ref LL_I3C_HANDOFF_DELAYED + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetControllerHandoffDelayed(I3C_TypeDef *I3Cx, uint32_t ControllerHandoffDelayed) +{ + MODIFY_REG(I3Cx->CRCAPR, I3C_CRCAPR_CAPDHOFF, ControllerHandoffDelayed); +} + +/** + * @brief Get the Delayed Controller Handoff bit in MSTCAP2. + * @rmtoll CRCAPR CAPDHOFF LL_I3C_GetControllerHandoffDelayed + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_NOT_DELAYED + * @arg @ref LL_I3C_HANDOFF_DELAYED + */ +__STATIC_INLINE uint32_t LL_I3C_GetControllerHandoffDelayed(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->CRCAPR, I3C_CRCAPR_CAPDHOFF)); +} + +/** + * @brief Configure the Activity State after controllership handoff. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll GETMXDSR HOFFAS LL_I3C_SetHandoffActivityState + * @param I3Cx I3C Instance. + * @param HandoffActivityState This parameter can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_0 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_1 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_2 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_3 + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetHandoffActivityState(I3C_TypeDef *I3Cx, uint32_t HandoffActivityState) +{ + MODIFY_REG(I3Cx->GETMXDSR, I3C_GETMXDSR_HOFFAS, HandoffActivityState); +} + +/** + * @brief Get the Activity State after controllership handoff. + * @rmtoll GETMXDSR HOFFAS LL_I3C_GetHandoffActivityState + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_0 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_1 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_2 + * @arg @ref LL_I3C_HANDOFF_ACTIVITY_STATE_3 + */ +__STATIC_INLINE uint32_t LL_I3C_GetHandoffActivityState(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->GETMXDSR, I3C_GETMXDSR_HOFFAS)); +} + +/** + * @brief Configure the Max Data Speed Format response for GETMXDS CCC. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll GETMXDSR FMT LL_I3C_SetMaxDataSpeedFormat + * @param I3Cx I3C Instance. + * @param MaxDataSpeedFormat This parameter can be one of the following values: + * @arg @ref LL_I3C_GETMXDS_FORMAT_1 + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_LSB + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_MID + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_MSB + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMaxDataSpeedFormat(I3C_TypeDef *I3Cx, uint32_t MaxDataSpeedFormat) +{ + MODIFY_REG(I3Cx->GETMXDSR, I3C_GETMXDSR_FMT, MaxDataSpeedFormat); +} + +/** + * @brief Get the Max Data Speed Format response for GETMXDS CCC. + * @rmtoll GETMXDSR FMT LL_I3C_GetMaxDataSpeedFormat + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_GETMXDS_FORMAT_1 + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_LSB + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_MID + * @arg @ref LL_I3C_GETMXDS_FORMAT_2_MSB + */ +__STATIC_INLINE uint32_t LL_I3C_GetMaxDataSpeedFormat(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->GETMXDSR, I3C_GETMXDSR_FMT)); +} + +/** + * @brief Configure the Middle byte of MaxRdTurn field of GETMXDS CCC Format 2 with turnaround. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll GETMXDSR RDTURN LL_I3C_SetMiddleByteTurnAround + * @param I3Cx I3C Instance. + * @param MiddleByteTurnAround This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMiddleByteTurnAround(I3C_TypeDef *I3Cx, uint32_t MiddleByteTurnAround) +{ + MODIFY_REG(I3Cx->GETMXDSR, I3C_GETMXDSR_RDTURN, (MiddleByteTurnAround << I3C_GETMXDSR_RDTURN_Pos)); +} + +/** + * @brief Get the value of Middle byte of MaxRdTurn field of GETMXDS CCC Format 2 with turnaround. + * @rmtoll GETMXDSR RDTURN LL_I3C_GetMiddleByteTurnAround + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetMiddleByteTurnAround(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->GETMXDSR, I3C_GETMXDSR_RDTURN)); +} + +/** + * @brief Configure clock-to-data turnaround time. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll GETMXDSR TSCO LL_I3C_SetDataTurnAroundTime + * @param I3Cx I3C Instance. + * @param DataTurnAroundTime This parameter can be one of the following values: + * @arg @ref LL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS + * @arg @ref LL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetDataTurnAroundTime(I3C_TypeDef *I3Cx, uint32_t DataTurnAroundTime) +{ + MODIFY_REG(I3Cx->GETMXDSR, I3C_GETMXDSR_TSCO, DataTurnAroundTime); +} + +/** + * @brief Get clock-to-data turnaround time. + * @rmtoll GETMXDSR TSCO LL_I3C_GetDataTurnAroundTime + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_TURNAROUND_TIME_TSCO_LESS_12NS + * @arg @ref LL_I3C_TURNAROUND_TIME_TSCO_GREATER_12NS + */ +__STATIC_INLINE uint32_t LL_I3C_GetDataTurnAroundTime(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->GETMXDSR, I3C_GETMXDSR_TSCO)); +} + +/** + * @brief Configure the MIPI Instance ID. + * @note Those bits can be programmed when the I3C is disabled (EN = 0). + * @rmtoll EPIDR MIPIID LL_I3C_SetMIPIInstanceID + * @param I3Cx I3C Instance. + * @param MIPIInstanceID This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetMIPIInstanceID(I3C_TypeDef *I3Cx, uint32_t MIPIInstanceID) +{ + MODIFY_REG(I3Cx->EPIDR, I3C_EPIDR_MIPIID, (MIPIInstanceID << I3C_EPIDR_MIPIID_Pos)); +} + +/** + * @brief Get the MIPI Instance ID. + * @rmtoll EPIDR MIPIID LL_I3C_GetMIPIInstanceID + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetMIPIInstanceID(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->EPIDR, I3C_EPIDR_MIPIID) >> I3C_EPIDR_MIPIID_Pos); +} + +/** + * @brief Get the ID type selector. + * @rmtoll EPIDR IDTSEL LL_I3C_GetIDTypeSelector + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x1 + */ +__STATIC_INLINE uint32_t LL_I3C_GetIDTypeSelector(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->EPIDR, I3C_EPIDR_IDTSEL) >> I3C_EPIDR_IDTSEL_Pos); +} + +/** + * @brief Get the MIPI Manufacturer ID. + * @rmtoll EPIDR MIPIMID LL_I3C_GetMIPIManufacturerID + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 and Max_Data=0x7FFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetMIPIManufacturerID(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->EPIDR, I3C_EPIDR_MIPIMID) >> I3C_EPIDR_MIPIMID_Pos); +} + +/** + * @} + */ + +/** @defgroup I3C_LL_EF_Data Management + * @{ + */ + +/** + * @brief Request a reception Data FIFO Flush. + * @rmtoll CFGR RXFLUSH LL_I3C_RequestRxFIFOFlush + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_RequestRxFIFOFlush(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_RXFLUSH); +} + +/** + * @brief Request a transmission Data FIFO Flush. + * @rmtoll CFGR TXFLUSH LL_I3C_RequestTxFIFOFlush + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_RequestTxFIFOFlush(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_TXFLUSH); +} + +/** + * @brief Request a Status Data FIFO Flush. + * @rmtoll CFGR SFLUSH LL_I3C_RequestStatusFIFOFlush + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_RequestStatusFIFOFlush(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_SFLUSH); +} + +/** + * @brief Get Activity state of Controller on the I3C Bus (Target only). + * @rmtoll DEVR0 AS LL_I3C_GetActivityState + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_BUS_ACTIVITY_STATE_0 + * @arg @ref LL_I3C_BUS_ACTIVITY_STATE_1 + * @arg @ref LL_I3C_BUS_ACTIVITY_STATE_2 + * @arg @ref LL_I3C_BUS_ACTIVITY_STATE_3 + */ +__STATIC_INLINE uint32_t LL_I3C_GetActivityState(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->DEVR0, I3C_DEVR0_AS)); +} + +/** + * @brief Get Reset Action (Target only). + * @rmtoll DEVR0 RSTACT LL_I3C_GetResetAction + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_RESET_ACTION_NONE + * @arg @ref LL_I3C_RESET_ACTION_PARTIAL + * @arg @ref LL_I3C_RESET_ACTION_FULL + */ +__STATIC_INLINE uint32_t LL_I3C_GetResetAction(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->DEVR0, I3C_DEVR0_RSTACT)); +} + +/** + * @brief Request a Control word FIFO Flush. + * @rmtoll CFGR CFLUSH LL_I3C_RequestControlFIFOFlush + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_RequestControlFIFOFlush(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_CFLUSH); +} + +/** + * @brief Request a Transfer start. + * @note After request, the current instruction in Control Register is executed on I3C Bus. + * @rmtoll CFGR TSFSET LL_I3C_RequestTransfer + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_RequestTransfer(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->CFGR, I3C_CFGR_TSFSET); +} + +/** + * @brief Handles I3C Message content on the I3C Bus as Controller. + * @rmtoll CR ADD LL_I3C_ControllerHandleMessage\n + * CR DCNT LL_I3C_ControllerHandleMessage\n + * CR RNW LL_I3C_ControllerHandleMessage\n + * CR MTYPE LL_I3C_ControllerHandleMessage\n + * CR MEND LL_I3C_ControllerHandleMessage + * @param I3Cx I3C Instance. + * @param TargetAddr Specifies the target address to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=65535. + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I3C_DIRECTION_WRITE + * @arg @ref LL_I3C_DIRECTION_READ + * @param MessageType This parameter can be one of the following values: + * @arg @ref LL_I3C_CONTROLLER_MTYPE_RELEASE + * @arg @ref LL_I3C_CONTROLLER_MTYPE_HEADER + * @arg @ref LL_I3C_CONTROLLER_MTYPE_PRIVATE + * @arg @ref LL_I3C_CONTROLLER_MTYPE_DIRECT + * @arg @ref LL_I3C_CONTROLLER_MTYPE_LEGACY_I2C + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I3C_GENERATE_STOP + * @arg @ref LL_I3C_GENERATE_RESTART + * @retval None + */ +__STATIC_INLINE void LL_I3C_ControllerHandleMessage(I3C_TypeDef *I3Cx, uint32_t TargetAddr, uint32_t TransferSize, + uint32_t Direction, uint32_t MessageType, uint32_t EndMode) +{ + WRITE_REG(I3Cx->CR, ((TargetAddr << I3C_CR_ADD_Pos) | TransferSize | Direction | MessageType | EndMode) \ + & (I3C_CR_ADD | I3C_CR_DCNT | I3C_CR_RNW | I3C_CR_MTYPE | I3C_CR_MEND)); +} + +/** + * @brief Handles I3C Common Command Code content on the I3C Bus as Controller. + * @rmtoll CR CCC LL_I3C_ControllerHandleCCC\n + * CR DCNT LL_I3C_ControllerHandleCCC\n + * CR MTYPE LL_I3C_ControllerHandleCCC\n + * CR MEND LL_I3C_ControllerHandleCCC + * @param I3Cx I3C Instance. + * @param CCCValue Specifies the Command Code to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=0x1FF. + * @param AddByteSize Specifies the number of CCC additional bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=65535. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I3C_GENERATE_STOP + * @arg @ref LL_I3C_GENERATE_RESTART + * @retval None + */ +__STATIC_INLINE void LL_I3C_ControllerHandleCCC(I3C_TypeDef *I3Cx, uint32_t CCCValue, + uint32_t AddByteSize, uint32_t EndMode) +{ + WRITE_REG(I3Cx->CR, ((CCCValue << I3C_CR_CCC_Pos) | AddByteSize | EndMode | LL_I3C_CONTROLLER_MTYPE_CCC) \ + & (I3C_CR_CCC | I3C_CR_DCNT | I3C_CR_MTYPE | I3C_CR_MEND)); +} + +/** + * @brief Handles I3C Message content on the I3C Bus as Target. + * @rmtoll CR MTYPE LL_I3C_TargetHandleMessage\n + * CR DCNT LL_I3C_TargetHandleMessage + * @param I3Cx I3C Instance. + * @param MessageType This parameter can be one of the following values: + * @arg @ref LL_I3C_TARGET_MTYPE_HOT_JOIN + * @arg @ref LL_I3C_TARGET_MTYPE_CONTROLLER_ROLE_REQ + * @arg @ref LL_I3C_TARGET_MTYPE_IBI + * @param IBISize Specifies the number of IBI bytes. + * This parameter must be a value between Min_Data=0 and Max_Data=65535. + * @retval None + */ +__STATIC_INLINE void LL_I3C_TargetHandleMessage(I3C_TypeDef *I3Cx, uint32_t MessageType, uint32_t IBISize) +{ + WRITE_REG(I3Cx->CR, (MessageType | IBISize) & (I3C_CR_DCNT | I3C_CR_MTYPE)); +} + +/** + * @} + */ + +/** @defgroup I3C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receive Data Byte register. + * @rmtoll RDR RDB0 LL_I3C_ReceiveData8 + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I3C_ReceiveData8(const I3C_TypeDef *I3Cx) +{ + return (uint8_t)(READ_BIT(I3Cx->RDR, I3C_RDR_RDB0)); +} + +/** + * @brief Write in Transmit Data Byte Register. + * @rmtoll TDR TDB0 LL_I3C_TransmitData8 + * @param I3Cx I3C Instance. + * @param Data This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_TransmitData8(I3C_TypeDef *I3Cx, uint8_t Data) +{ + WRITE_REG(I3Cx->TDR, Data); +} + +/** + * @brief Read Receive Data Word register. + * @note Content of register is filled in Little Endian. + * Mean MSB correspond to last data byte received, + * LSB correspond to first data byte received. + * @rmtoll RDWR RDWR LL_I3C_ReceiveData32 + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_I3C_ReceiveData32(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_REG(I3Cx->RDWR)); +} + +/** + * @brief Write in Transmit Data Word Register. + * @note Content of register is filled in Little Endian. + * Mean MSB correspond to last data byte transmitted, + * LSB correspond to first data byte transmitted. + * @rmtoll TDWR TDWR LL_I3C_TransmitData32 + * @param I3Cx I3C Instance. + * @param Data This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @retval None + */ +__STATIC_INLINE void LL_I3C_TransmitData32(I3C_TypeDef *I3Cx, uint32_t Data) +{ + WRITE_REG(I3Cx->TDWR, Data); +} + +/** + * @brief Configure the IBI data payload to be sent during IBI (target mode). + * @note Content of register is filled in Little Endian. + * Mean MSB correspond to last IBI data byte, + * LSB correspond to first IBI data byte. + * @rmtoll IBIDR IBIDR LL_I3C_SetIBIPayload + * @param I3Cx I3C Instance. + * @param OwnIBIPayload This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetIBIPayload(I3C_TypeDef *I3Cx, uint32_t OwnIBIPayload) +{ + WRITE_REG(I3Cx->IBIDR, OwnIBIPayload); +} + +/** + * @brief Get the own IBI data payload (target mode), or get the Target IBI received (controller mode). + * @note Content of register is filled in Little Endian. + * Mean MSB correspond to last IBI data byte, + * LSB correspond to first IBI data byte. + * @rmtoll IBIDR IBIDR LL_I3C_GetIBIPayload + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_I3C_GetIBIPayload(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_REG(I3Cx->IBIDR)); +} + +/** + * @brief Get the number of data bytes received when reading IBI data (controller mode). + * @rmtoll RMR IBIRDCNT LL_I3C_GetNbIBIAddData + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0x7 + */ +__STATIC_INLINE uint32_t LL_I3C_GetNbIBIAddData(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->RMR, I3C_RMR_IBIRDCNT)); +} + +/** + * @brief Get the target address received during accepted IBI or Controller-role request. + * @rmtoll RMR RADD LL_I3C_GetIBITargetAddr + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I3C_GetIBITargetAddr(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->RMR, I3C_RMR_RADD) >> I3C_RMR_RADD_Pos); +} + +/** + * @brief Set TX FIFO Preload (target mode). + * @note Set high by Software, cleared by hardware when all the bytes to transmit have been loaded to TX FIFO. + * @rmtoll TGTTDR PRELOAD LL_I3C_ConfigTxPreload + * @rmtoll TGTTDR TDCNT LL_I3C_ConfigTxPreload + * @param I3Cx I3C Instance. + * @param TxDataCount This parameter must be a value between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I3C_ConfigTxPreload(I3C_TypeDef *I3Cx, uint16_t TxDataCount) +{ + MODIFY_REG(I3Cx->TGTTDR, (I3C_TGTTDR_PRELOAD | I3C_TGTTDR_TGTTDCNT), (I3C_TGTTDR_PRELOAD | TxDataCount)); +} + +/** + * @brief Indicates the status of TX FIFO preload (target mode). + * RESET: No preload of TX FIFO. + * SET: Preload of TX FIFO ongoing. + * @note Set high by Software, cleared by hardware when all the bytes to transmit have been loaded to TX FIFO. + * @rmtoll TGTTDR PRELOAD LL_I3C_IsActiveTxPreload + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveTxPreload(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->TGTTDR, I3C_TGTTDR_PRELOAD) == (I3C_TGTTDR_PRELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Get the number of bytes to transmit (target mode). + * @note The return value correspond to the remaining number of bytes to load in TX FIFO. + * @rmtoll TGTTDR TDCNT LL_I3C_GetTxPreloadDataCount + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I3C_GetTxPreloadDataCount(const I3C_TypeDef *I3Cx) +{ + return (uint16_t)(READ_BIT(I3Cx->TGTTDR, I3C_TGTTDR_TGTTDCNT)); +} + +/** + * @brief Get the number of data during a Transfer. + * @note The return value correspond to number of transmitted bytes reported + * during Address Assignment process in Target mode. + * The return value correspond to number of target detected + * during Address Assignment process in Controller mode. + * The return value correspond to number of data bytes read from or sent to the I3C bus + * during the message link to MID current value. + * @rmtoll SR XDCNT LL_I3C_GetXferDataCount + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_I3C_GetXferDataCount(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->SR, I3C_SR_XDCNT)); +} + +/** + * @brief Indicates if a Target abort a private read command. + * @rmtoll SR ABT LL_I3C_IsTargetAbortPrivateRead + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsTargetAbortPrivateRead(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SR, I3C_SR_ABT) == (I3C_SR_ABT)) ? 1UL : 0UL); +} + +/** + * @brief Get Direction of the Message. + * @rmtoll SR DIR LL_I3C_GetMessageDirection + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_MESSAGE_DIRECTION_WRITE + * @arg @ref LL_I3C_MESSAGE_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I3C_GetMessageDirection(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->SR, I3C_SR_DIR)); +} + +/** + * @brief Get Message identifier. + * @rmtoll SR MID LL_I3C_GetMessageIdentifier + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFF, representing the internal hardware counter value. + */ +__STATIC_INLINE uint32_t LL_I3C_GetMessageIdentifier(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->SR, I3C_SR_MID)); +} + +/** + * @brief Get Message error code. + * @rmtoll SER CODERR LL_I3C_GetMessageErrorCode + * @param I3Cx I3C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I3C_CONTROLLER_ERROR_CE0 + * @arg @ref LL_I3C_CONTROLLER_ERROR_CE1 + * @arg @ref LL_I3C_CONTROLLER_ERROR_CE2 + * @arg @ref LL_I3C_CONTROLLER_ERROR_CE3 + * @arg @ref LL_I3C_TARGET_ERROR_TE0 + * @arg @ref LL_I3C_TARGET_ERROR_TE1 + * @arg @ref LL_I3C_TARGET_ERROR_TE2 + * @arg @ref LL_I3C_TARGET_ERROR_TE3 + * @arg @ref LL_I3C_TARGET_ERROR_TE4 + * @arg @ref LL_I3C_TARGET_ERROR_TE5 + * @arg @ref LL_I3C_TARGET_ERROR_TE6 + */ +__STATIC_INLINE uint32_t LL_I3C_GetMessageErrorCode(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->SER, I3C_SER_CODERR)); +} + +/** + * @brief Get CCC code of received command. + * @rmtoll RMR RCODE LL_I3C_GetReceiveCommandCode + * @param I3Cx I3C Instance. + * @retval Value between Min_Data=0 to Max_Data=0xFF. + */ +__STATIC_INLINE uint32_t LL_I3C_GetReceiveCommandCode(const I3C_TypeDef *I3Cx) +{ + return (uint32_t)(READ_BIT(I3Cx->RMR, I3C_RMR_RCODE) >> I3C_RMR_RCODE_Pos); +} + +/** + * @} + */ + +/** @defgroup I3C_LL_EF_Target Payload + * @{ + */ + +/** + * @brief Set Dynamic Address assigned to target x. + * @rmtoll DEVRX DA LL_I3C_SetTargetDynamicAddress + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @param DynamicAddr Value between Min_Data=0 to Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_I3C_SetTargetDynamicAddress(I3C_TypeDef *I3Cx, uint32_t TargetId, uint32_t DynamicAddr) +{ + MODIFY_REG(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_DA, (DynamicAddr << I3C_DEVRX_DA_Pos)); +} + +/** + * @brief Get Dynamic Address assigned to target x. + * @rmtoll DEVRX DA LL_I3C_GetTargetDynamicAddress + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval Value between Min_Data=0 to Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_I3C_GetTargetDynamicAddress(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return (uint32_t)((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_DA)) >> I3C_DEVRX_DA_Pos); +} + +/** + * @brief Enable IBI Acknowledgement from target x(controller mode). + * @note The bit DIS is automatically set when CRACK or IBIACK are set. + * This mean DEVRX register access is not allowed. + * Reset CRACK and IBIACK will reset DIS bit. + * @rmtoll DEVRX IBIACK LL_I3C_EnableTargetIBIAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableTargetIBIAck(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + SET_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIACK); +} + +/** + * @brief Disable IBI Acknowledgement from target x (controller mode). + * @rmtoll DEVRX IBIACK LL_I3C_DisableTargetIBIAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableTargetIBIAck(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + CLEAR_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIACK); +} + +/** + * @brief Indicates if IBI from target x will be Acknowledged or Not Acknowledged (controller mode). + * RESET: IBI Not Acknowledged. + * SET: IBI Acknowledged. + * @rmtoll DEVRX IBIACK LL_I3C_IsEnabledTargetIBIAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledTargetIBIAck(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return ((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIACK) == I3C_DEVRX_IBIACK) ? 1UL : 0UL); +} + +/** + * @brief Enable Controller-role Request Acknowledgement from target x(controller mode). + * @note The bit DIS is automatically set when CRACK or IBIACK are set. + * This mean DEVRX register access is not allowed. + * Reset CRACK and IBIACK will reset DIS bit. + * @rmtoll DEVRX CRACK LL_I3C_EnableTargetCRAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableTargetCRAck(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + SET_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_CRACK); +} + +/** + * @brief Disable Controller-role Request Acknowledgement from target x (controller mode). + * @rmtoll DEVRX CRACK LL_I3C_DisableTargetCRAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableTargetCRAck(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + CLEAR_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_CRACK); +} + +/** + * @brief Indicates if Controller-role Request from target x will be + * Acknowledged or Not Acknowledged (controller mode). + * RESET: Controller-role Request Not Acknowledged. + * SET: Controller-role Request Acknowledged. + * @rmtoll DEVRX CRACK LL_I3C_IsEnabledTargetCRAck + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledTargetCRAck(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return ((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_CRACK) == I3C_DEVRX_CRACK) ? 1UL : 0UL); +} + +/** + * @brief Enable additional Mandatory Data Byte (MDB) follows the accepted IBI from target x. + * @rmtoll DEVRX IBIDEN LL_I3C_EnableIBIAddData + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIBIAddData(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + SET_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIDEN); +} + +/** + * @brief Disable additional Mandatory Data Byte (MDB) follows the accepted IBI from target x. + * @rmtoll DEVRX IBIDEN LL_I3C_DisableIBIAddData + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIBIAddData(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + CLEAR_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIDEN); +} + +/** + * @brief Indicates if additional Mandatory Data Byte (MDB) follows the accepted IBI from target x. + * RESET: No Mandatory Data Byte follows IBI. + * SET: Mandatory Data Byte follows IBI. + * @rmtoll DEVRX IBIDEN LL_I3C_IsEnabledIBIAddData + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIBIAddData(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return ((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_IBIDEN) == I3C_DEVRX_IBIDEN) ? 1UL : 0UL); +} + +/** + * @brief Enable Suspension of Current transfer during IBI treatment. + * @note When set, this feature will allow controller to send + * a Stop condition and CR FIFO is flushed after IBI treatment. + * Software has to rewrite instructions in Control Register to start a new transfer. + * @rmtoll DEVRX SUSP LL_I3C_EnableFrameSuspend + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableFrameSuspend(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + SET_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_SUSP); +} + +/** + * @brief Disable Suspension of Current transfer during IBI treatment. + * @note When set, this feature will allow controller to continue CR FIFO treatment after IBI treatment. + * @rmtoll DEVRX SUSP LL_I3C_DisableFrameSuspend + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableFrameSuspend(I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + CLEAR_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_SUSP); +} + +/** + * @brief Indicates if I3C transfer must be Suspended or not Suspended during IBI treatment from target x. + * RESET: Transfer is not suspended. Instruction in CR FIFO are executed after IBI. + * SET: Transfer is suspended (a Stop condition is sent). CR FIFO is flushed. + * @rmtoll DEVRX SUSP LL_I3C_IsFrameMustBeSuspended + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsFrameMustBeSuspended(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return ((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_SUSP) == I3C_DEVRX_SUSP) ? 1UL : 0UL); +} + +/** + * @brief Indicates if update of the Device Characteristics Register is Allowed or Not Allowed. + * RESET: Device Characteristics Register update is Not Allowed. + * SET: Device Characteristics Register update is Allowed. + * @note Used to prevent software writing during reception of an IBI or Controller-role Request from target x. + * @rmtoll DEVRX DIS LL_I3C_IsAllowedPayloadUpdate + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsAllowedPayloadUpdate(const I3C_TypeDef *I3Cx, uint32_t TargetId) +{ + return ((READ_BIT(I3Cx->DEVRX[TargetId - 1U], I3C_DEVRX_DIS) != I3C_DEVRX_DIS) ? 1UL : 0UL); +} + +/** + * @brief Set I3C bus devices configuration. + * @note This function is called only when the I3C instance is initialized as controller. + * This function can be called by the controller application to help the automatic treatment when target have + * capability of IBI and/or Control-Role. + * @rmtoll DEVRX DA LL_I3C_ConfigDeviceCapabilities + * @rmtoll DEVRX IBIACK LL_I3C_ConfigDeviceCapabilities + * @rmtoll DEVRX IBIDEN LL_I3C_ConfigDeviceCapabilities + * @rmtoll DEVRX CRACK LL_I3C_ConfigDeviceCapabilities + * @param I3Cx I3C Instance. + * @param TargetId This parameter must be a value between Min_Data=1 and Max_Data=4 + * @param DynamicAddr Value between Min_Data=0 to Max_Data=0x7F + * @param IBIAck Value This parameter can be one of the following values: + * @arg @ref LL_I3C_IBI_CAPABILITY + * @arg @ref LL_I3C_IBI_NO_CAPABILITY + * @param IBIAddData This parameter can be one of the following values: + * @arg @ref LL_I3C_IBI_DATA_ENABLE + * @arg @ref LL_I3C_IBI_DATA_DISABLE + * @param CRAck This parameter can be one of the following values: + * @arg @ref LL_I3C_CR_CAPABILITY + * @arg @ref LL_I3C_CR_NO_CAPABILITY + * @retval None + */ +__STATIC_INLINE void LL_I3C_ConfigDeviceCapabilities(I3C_TypeDef *I3Cx, + uint32_t TargetId, + uint32_t DynamicAddr, + uint32_t IBIAck, + uint32_t IBIAddData, + uint32_t CRAck) +{ + MODIFY_REG(I3Cx->DEVRX[TargetId - 1U], \ + (I3C_DEVRX_DA | I3C_DEVRX_IBIACK | I3C_DEVRX_CRACK | I3C_DEVRX_IBIDEN), \ + ((DynamicAddr << I3C_DEVRX_DA_Pos) | IBIAck | IBIAddData | CRAck)); +} +/** + * @} + */ + +/** @defgroup I3C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicates the status of Control FIFO Empty flag. + * RESET: One or more data are available in Control FIFO. + * SET: No more data available in Control FIFO. + * @rmtoll EVR CFEF LL_I3C_IsActiveFlag_CFE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_CFE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_CFEF) == (I3C_EVR_CFEF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Transmit FIFO Empty flag. + * RESET: One or more data are available in Transmit FIFO. + * SET: No more data available in Transmit FIFO. + * @rmtoll EVR TXFEF LL_I3C_IsActiveFlag_TXFE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_TXFE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_TXFEF) == (I3C_EVR_TXFEF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Control FIFO Not Full flag. + * RESET: One or more free space available in Control FIFO. + * SET: No more free space available in Control FIFO. + * @note When a transfer is ongoing, the Control FIFO shall not be written unless this flag is set. + * @rmtoll EVR CFNFF LL_I3C_IsActiveFlag_CFNF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_CFNF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_CFNFF) == (I3C_EVR_CFNFF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Status FIFO Not Empty flag. + * RESET: One or more free space available in Status FIFO. + * SET: No more free space available in Status FIFO. + * @note This flag is updated only when the FIFO is used, mean SMODE = 1. + * @rmtoll EVR SFNEF LL_I3C_IsActiveFlag_SFNE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_SFNE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_SFNEF) == (I3C_EVR_SFNEF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Transmit FIFO Not Full flag. + * RESET: One or more free space available in Transmit FIFO. + * SET: No more free space available in Transmit FIFO. + * @note When a transfer is ongoing, the Transmit FIFO shall not be written unless this flag is set. + * @rmtoll EVR TXFNFF LL_I3C_IsActiveFlag_TXFNF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_TXFNF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_TXFNFF) == (I3C_EVR_TXFNFF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Receive FIFO Not Full flag. + * RESET: One or more data are available in Receive FIFO. + * SET: No more data available in Receive FIFO. + * @rmtoll EVR RXFNEF LL_I3C_IsActiveFlag_RXFNE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_RXFNE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_RXFNEF) == (I3C_EVR_RXFNEF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates that the last Receive byte is available. + * RESET: Clear default value. + * SET: Last Receive byte ready to read from Receive FIFO. + * @rmtoll EVR RXLASTF LL_I3C_IsActiveFlag_RXLAST + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_RXLAST(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_RXLASTF) == (I3C_EVR_RXLASTF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates that the last Transmit byte is written in FIFO. + * RESET: Transmission is not finalized. + * SET: Last Transmit byte is written in transmit FIFO. + * @rmtoll EVR TXLASTF LL_I3C_IsActiveFlag_TXLAST + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_TXLAST(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_TXLASTF) == (I3C_EVR_TXLASTF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Frame Complete flag (controller and target mode). + * RESET: Current Frame transfer is not finalized. + * SET: Current Frame transfer is completed. + * @rmtoll EVR FCF LL_I3C_IsActiveFlag_FC + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_FC(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_FCF) == (I3C_EVR_FCF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Reception Target End flag (controller mode). + * RESET: Clear default value. + * SET: Target prematurely ended a Read Command. + * @note This flag is set only when status FIFO is not used, mean SMODE = 0. + * @rmtoll EVR RXTGTENDF LL_I3C_IsActiveFlag_RXTGTEND + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_RXTGTEND(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_RXTGTENDF) == (I3C_EVR_RXTGTENDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Error flag (controller and target mode). + * RESET: Clear default value. + * SET: One or more Errors are detected. + * @rmtoll EVR ERRF LL_I3C_IsActiveFlag_ERR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_ERR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_ERRF) == (I3C_EVR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of IBI flag (controller mode). + * RESET: Clear default value. + * SET: An IBI have been received. + * @rmtoll EVR IBIF LL_I3C_IsActiveFlag_IBI + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_IBI(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_IBIF) == (I3C_EVR_IBIF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of IBI End flag (target mode). + * RESET: Clear default value. + * SET: IBI procedure is finished. + * @rmtoll EVR IBIENDF LL_I3C_IsActiveFlag_IBIEND + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_IBIEND(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_IBIENDF) == (I3C_EVR_IBIENDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Controller-role Request flag (controller mode). + * RESET: Clear default value. + * SET: A Controller-role request procedure have been received. + * @rmtoll EVR CRF LL_I3C_IsActiveFlag_CR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_CR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_CRF) == (I3C_EVR_CRF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Controller-role Request Update flag (target mode). + * RESET: Clear default value. + * SET: I3C device have gained Controller-role of the I3C Bus. + * @rmtoll EVR BCUPDF LL_I3C_IsActiveFlag_CRUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_CRUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_CRUPDF) == (I3C_EVR_CRUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Hot Join flag (controller mode). + * RESET: Clear default value. + * SET: A Hot Join request have been received. + * @rmtoll EVR HJF LL_I3C_IsActiveFlag_HJ + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_HJ(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_HJF) == (I3C_EVR_HJF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Wake Up flag (target mode). + * RESET: Clear default value. + * SET: I3C Internal clock not available on time to treat the falling edge on SCL. + * @rmtoll EVR WKPF LL_I3C_IsActiveFlag_WKP + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_WKP(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_WKPF) == (I3C_EVR_WKPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Get flag (target mode). + * RESET: Clear default value. + * SET: A "get" type CCC have been received. + * @rmtoll EVR GETF LL_I3C_IsActiveFlag_GET + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_GET(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_GETF) == (I3C_EVR_GETF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Get Status flag (target mode). + * RESET: Clear default value. + * SET: A GETSTATUS Command have been received. + * @rmtoll EVR STAF LL_I3C_IsActiveFlag_STA + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_STA(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_STAF) == (I3C_EVR_STAF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Dynamic Address Update flag (target mode). + * RESET: Clear default value. + * SET: Own Dynamic Address have been updated. + * @rmtoll EVR DAUPDF LL_I3C_IsActiveFlag_DAUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_DAUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_DAUPDF) == (I3C_EVR_DAUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Max Write Length flag (target mode). + * RESET: Clear default value. + * SET: Max Write Length have been updated. + * @rmtoll EVR MWLUPDF LL_I3C_IsActiveFlag_MWLUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_MWLUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_MWLUPDF) == (I3C_EVR_MWLUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Max Read Length flag (target mode). + * RESET: Clear default value. + * SET: Max Read Length have been updated. + * @rmtoll EVR MRLUPDF LL_I3C_IsActiveFlag_MRLUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_MRLUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_MRLUPDF) == (I3C_EVR_MRLUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Reset flag (target mode). + * RESET: Clear default value. + * SET: A Reset Pattern have been received. + * @rmtoll EVR RSTF LL_I3C_IsActiveFlag_RST + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_RST(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_RSTF) == (I3C_EVR_RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Active State flag (target mode). + * RESET: Clear default value. + * SET: The Activity State have been updated. + * @rmtoll EVR ASUPDF LL_I3C_IsActiveFlag_ASUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_ASUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_ASUPDF) == (I3C_EVR_ASUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Interrupt Update flag (target mode). + * RESET: Clear default value. + * SET: One or more Interrupt autorized have been updated. + * @rmtoll EVR INTUPDF LL_I3C_IsActiveFlag_INTUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_INTUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_INTUPDF) == (I3C_EVR_INTUPDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Define List Targets flag (target mode). + * RESET: Clear default value. + * SET: A Define List Targets Command have been received. + * @rmtoll EVR DEFF LL_I3C_IsActiveFlag_DEF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_DEF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_DEFF) == (I3C_EVR_DEFF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Define List Group Addresses flag. + * RESET: Clear default value. + * SET: A Define List Group Addresses have been received. + * @rmtoll EVR GRPF LL_I3C_IsActiveFlag_GRP + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_GRP(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->EVR, I3C_EVR_GRPF) == (I3C_EVR_GRPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Protocol Error flag. + * RESET: Clear default value. + * SET: Protocol error detected. + * @rmtoll SER PERR LL_I3C_IsActiveFlag_PERR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_PERR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_PERR) == (I3C_SER_PERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of SCL Stall Error flag (target mode). + * RESET: Clear default value. + * SET: Target detected that SCL was stable for more than 125us during I3C SDR read. + * @rmtoll SER STALL LL_I3C_IsActiveFlag_STALL + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_STALL(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_STALL) == (I3C_SER_STALL)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of RX or TX FIFO Overrun flag. + * RESET: Clear default value. + * SET: RX FIFO Full or TX FIFO Empty depending of direction of message. + * @rmtoll SER DOVR LL_I3C_IsActiveFlag_DOVR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_DOVR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_DOVR) == (I3C_SER_DOVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Control or Status FIFO Overrun flag (controller mode). + * RESET: Clear default value. + * SET: Status FIFO Full or Control FIFO Empty after Restart. + * @rmtoll SER COVR LL_I3C_IsActiveFlag_COVR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_COVR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_COVR) == (I3C_SER_COVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Address not acknowledged flag (controller mode). + * RESET: Clear default value. + * SET: Controller detected that Target nacked static or dynamic address. + * @rmtoll SER ANACK LL_I3C_IsActiveFlag_ANACK + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_ANACK(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_ANACK) == (I3C_SER_ANACK)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Data not acknowledged flag (controller mode). + * RESET: Clear default value. + * SET: Controller detected that Target nacked Data byte. + * @rmtoll SER DNACK LL_I3C_IsActiveFlag_DNACK + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_DNACK(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_DNACK) == (I3C_SER_DNACK)) ? 1UL : 0UL); +} + +/** + * @brief Indicates the status of Data error flag (controller mode). + * RESET: Clear default value. + * SET: Controller detected data error during Controller-role handoff process. + * @rmtoll SER DERR LL_I3C_IsActiveFlag_DERR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsActiveFlag_DERR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->SER, I3C_SER_DERR) == (I3C_SER_DERR)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I3C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Control FIFO Not Full interrupt. + * @rmtoll IER CFNFIE LL_I3C_EnableIT_CFNF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_CFNF(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_CFNFIE); +} + +/** + * @brief Disable Control FIFO Not Full interrupt. + * @rmtoll IER CFNFIE LL_I3C_DisableIT_CFNF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_CFNF(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_CFNFIE); +} + +/** + * @brief Check if Control FIFO Not Full interrupt is enabled or disabled. + * @rmtoll IER CFNFIE LL_I3C_IsEnabledIT_CFNF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_CFNF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_CFNFIE) == (I3C_IER_CFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Status FIFO Not Empty interrupt. + * @rmtoll IER SFNEIE LL_I3C_EnableIT_SFNE + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_SFNE(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_SFNEIE); +} + +/** + * @brief Disable Status FIFO Not Empty interrupt. + * @rmtoll IER SFNEIE LL_I3C_DisableIT_SFNE + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_SFNE(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_SFNEIE); +} + +/** + * @brief Check if Status FIFO Not Empty interrupt is enabled or disabled. + * @rmtoll IER SFNEIE LL_I3C_IsEnabledIT_SFNE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_SFNE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_SFNEIE) == (I3C_IER_SFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transmit FIFO Not Full interrupt. + * @rmtoll IER TXFNFIE LL_I3C_EnableIT_TXFNF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_TXFNF(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_TXFNFIE); +} + +/** + * @brief Disable Transmit FIFO Not Full interrupt. + * @rmtoll IER TXFNFIE LL_I3C_DisableIT_TXFNF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_TXFNF(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_TXFNFIE); +} + +/** + * @brief Check if Transmit FIFO Not Full interrupt is enabled or disabled. + * @rmtoll IER TXFNFIE LL_I3C_IsEnabledIT_TXFNF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_TXFNF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_TXFNFIE) == (I3C_IER_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Receive FIFO Not Empty interrupt. + * @rmtoll IER RXFNEIE LL_I3C_EnableIT_RXFNE + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_RXFNE(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_RXFNEIE); +} + +/** + * @brief Disable Receive FIFO Not Empty interrupt. + * @rmtoll IER RXFNEIE LL_I3C_DisableIT_RXFNE + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_RXFNE(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_RXFNEIE); +} + +/** + * @brief Check if Receive FIFO Not Empty interrupt is enabled or disabled. + * @rmtoll IER RXFNEIE LL_I3C_IsEnabledIT_RXFNE + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_RXFNE(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_RXFNEIE) == (I3C_IER_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Frame Complete interrupt. + * @rmtoll IER FCIE LL_I3C_EnableIT_FC + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_FC(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_FCIE); +} + +/** + * @brief Disable Frame Complete interrupt. + * @rmtoll IER FCIE LL_I3C_DisableIT_FC + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_FC(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_FCIE); +} + +/** + * @brief Check if Frame Complete interrupt is enabled or disabled. + * @rmtoll IER FCIE LL_I3C_IsEnabledIT_FC + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_FC(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_FCIE) == (I3C_IER_FCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Reception Target End interrupt. + * @rmtoll IER RXTGTENDIE LL_I3C_EnableIT_RXTGTEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_RXTGTEND(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_RXTGTENDIE); +} + +/** + * @brief Disable Reception Target End interrupt. + * @rmtoll IER RXTGTENDIE LL_I3C_DisableIT_RXTGTEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_RXTGTEND(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_RXTGTENDIE); +} + +/** + * @brief Check if Reception Target End interrupt is enabled or disabled. + * @rmtoll IER RXTGTENDIE LL_I3C_IsEnabledIT_RXTGTEND + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_RXTGTEND(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_RXTGTENDIE) == (I3C_IER_RXTGTENDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupt. + * @rmtoll IER ERRIE LL_I3C_EnableIT_ERR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_ERR(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_ERRIE); +} + +/** + * @brief Disable Error interrupt. + * @rmtoll IER ERRIE LL_I3C_DisableIT_ERR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_ERR(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_ERRIE); +} + +/** + * @brief Check if Error interrupt is enabled or disabled. + * @rmtoll IER ERRIE LL_I3C_IsEnabledIT_ERR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_ERR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_ERRIE) == (I3C_IER_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable IBI interrupt. + * @rmtoll IER IBIIE LL_I3C_EnableIT_IBI + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_IBI(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_IBIIE); +} + +/** + * @brief Disable IBI interrupt. + * @rmtoll IER IBIIE LL_I3C_DisableIT_IBI + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_IBI(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_IBIIE); +} + +/** + * @brief Check if IBI interrupt is enabled or disabled. + * @rmtoll IER IBIIE LL_I3C_IsEnabledIT_IBI + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_IBI(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_IBIIE) == (I3C_IER_IBIIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable IBI End interrupt. + * @rmtoll IER IBIENDIE LL_I3C_EnableIT_IBIEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_IBIEND(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_IBIENDIE); +} + +/** + * @brief Disable IBI End interrupt. + * @rmtoll IER IBIENDIE LL_I3C_DisableIT_IBIEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_IBIEND(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_IBIENDIE); +} + +/** + * @brief Check if IBI End interrupt is enabled or disabled. + * @rmtoll IER IBIENDIE LL_I3C_IsEnabledIT_IBIEND + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_IBIEND(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_IBIENDIE) == (I3C_IER_IBIENDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Controller-role interrupt. + * @rmtoll IER CRIE LL_I3C_EnableIT_CR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_CR(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_CRIE); +} + +/** + * @brief Disable Controller-role interrupt. + * @rmtoll IER CRIE LL_I3C_DisableIT_CR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_CR(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_CRIE); +} + +/** + * @brief Check if Controller-role interrupt is enabled or disabled. + * @rmtoll IER CRIE LL_I3C_IsEnabledIT_CR + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_CR(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_CRIE) == (I3C_IER_CRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Controller-role Update interrupt. + * @rmtoll IER CRUPDIE LL_I3C_EnableIT_CRUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_CRUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_CRUPDIE); +} + +/** + * @brief Disable Controller-role Update interrupt. + * @rmtoll IER CRUPDIE LL_I3C_DisableIT_CRUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_CRUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_CRUPDIE); +} + +/** + * @brief Check if Controller-role Update interrupt is enabled or disabled. + * @rmtoll IER CRUPDIE LL_I3C_IsEnabledIT_CRUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_CRUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_CRUPDIE) == (I3C_IER_CRUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Hot Join interrupt. + * @rmtoll IER HJIE LL_I3C_EnableIT_HJ + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_HJ(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_HJIE); +} + +/** + * @brief Disable Hot Join interrupt. + * @rmtoll IER HJIE LL_I3C_DisableIT_HJ + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_HJ(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_HJIE); +} + +/** + * @brief Check if Hot Join interrupt is enabled or disabled. + * @rmtoll IER HJIE LL_I3C_IsEnabledIT_HJ + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_HJ(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_HJIE) == (I3C_IER_HJIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wake Up interrupt. + * @rmtoll IER WKPIE LL_I3C_EnableIT_WKP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_WKP(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_WKPIE); +} + +/** + * @brief Disable Wake Up interrupt. + * @rmtoll IER WKPIE LL_I3C_DisableIT_WKP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_WKP(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_WKPIE); +} + +/** + * @brief Check if Wake Up is enabled or disabled. + * @rmtoll IER WKPIE LL_I3C_IsEnabledIT_WKP + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_WKP(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_WKPIE) == (I3C_IER_WKPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Get Command interrupt. + * @rmtoll IER GETIE LL_I3C_EnableIT_GET + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_GET(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_GETIE); +} + +/** + * @brief Disable Get Command interrupt. + * @rmtoll IER GETIE LL_I3C_DisableIT_GET + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_GET(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_GETIE); +} + +/** + * @brief Check if Get Command is enabled or disabled. + * @rmtoll IER GETIE LL_I3C_IsEnabledIT_GET + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_GET(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_GETIE) == (I3C_IER_GETIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Get Status interrupt. + * @rmtoll IER STAIE LL_I3C_EnableIT_STA + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_STA(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_STAIE); +} + +/** + * @brief Disable Get Status interrupt. + * @rmtoll IER STAIE LL_I3C_DisableIT_STA + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_STA(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_STAIE); +} + +/** + * @brief Check if Get Status interrupt is enabled or disabled. + * @rmtoll IER STAIE LL_I3C_IsEnabledIT_STA + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_STA(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_STAIE) == (I3C_IER_STAIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Dynamic Address Update interrupt. + * @rmtoll IER DAUPDIE LL_I3C_EnableIT_DAUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_DAUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_DAUPDIE); +} + +/** + * @brief Disable Dynamic Address Update interrupt. + * @rmtoll IER DAUPDIE LL_I3C_DisableIT_DAUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_DAUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_DAUPDIE); +} + +/** + * @brief Check if Dynamic Address Update interrupt is enabled or disabled. + * @rmtoll IER DAUPDIE LL_I3C_IsEnabledIT_DAUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_DAUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_DAUPDIE) == (I3C_IER_DAUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Max Write Length Update interrupt. + * @rmtoll IER MWLUPDIE LL_I3C_EnableIT_MWLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_MWLUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_MWLUPDIE); +} + +/** + * @brief Disable Max Write Length Update interrupt. + * @rmtoll IER MWLUPDIE LL_I3C_DisableIT_MWLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_MWLUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_MWLUPDIE); +} + +/** + * @brief Check if Max Write Length Update interrupt is enabled or disabled. + * @rmtoll IER MWLUPDIE LL_I3C_IsEnabledIT_MWLUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_MWLUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_MWLUPDIE) == (I3C_IER_MWLUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Max Read Length Update interrupt. + * @rmtoll IER MRLUPDIE LL_I3C_EnableIT_MRLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_MRLUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_MRLUPDIE); +} + +/** + * @brief Disable Max Read Length Update interrupt. + * @rmtoll IER MRLUPDIE LL_I3C_DisableIT_MRLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_MRLUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_MRLUPDIE); +} + +/** + * @brief Check if Max Read Length Update interrupt is enabled or disabled. + * @rmtoll IER MRLUPDIE LL_I3C_IsEnabledIT_MRLUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_MRLUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_MRLUPDIE) == (I3C_IER_MRLUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Reset interrupt. + * @rmtoll IER RSTIE LL_I3C_EnableIT_RST + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_RST(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_RSTIE); +} + +/** + * @brief Disable Reset interrupt. + * @rmtoll IER RSTIE LL_I3C_DisableIT_RST + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_RST(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_RSTIE); +} + +/** + * @brief Check if Reset interrupt is enabled or disabled. + * @rmtoll IER RSTIE LL_I3C_IsEnabledIT_RST + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_RST(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_RSTIE) == (I3C_IER_RSTIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Activity State Update interrupt. + * @rmtoll IER ASUPDIE LL_I3C_EnableIT_ASUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_ASUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_ASUPDIE); +} + +/** + * @brief Disable Activity State Update interrupt. + * @rmtoll IER ASUPDIE LL_I3C_DisableIT_ASUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_ASUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_ASUPDIE); +} + +/** + * @brief Check if Activity State Update interrupt is enabled or disabled. + * @rmtoll IER ASUPDIE LL_I3C_IsEnabledIT_ASUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_ASUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_ASUPDIE) == (I3C_IER_ASUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Interrupt Update interrupt. + * @rmtoll IER INTUPDIE LL_I3C_EnableIT_INTUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_INTUPD(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_INTUPDIE); +} + +/** + * @brief Disable Interrupt Update interrupt. + * @rmtoll IER INTUPDIE LL_I3C_DisableIT_INTUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_INTUPD(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_INTUPDIE); +} + +/** + * @brief Check if Interrupt Update interrupt is enabled or disabled. + * @rmtoll IER INTUPDIE LL_I3C_IsEnabledIT_INTUPD + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_INTUPD(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_INTUPDIE) == (I3C_IER_INTUPDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Define List Target interrupt. + * @rmtoll IER DEFIE LL_I3C_EnableIT_DEF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_DEF(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_DEFIE); +} + +/** + * @brief Disable Define List Target interrupt. + * @rmtoll IER DEFIE LL_I3C_DisableIT_DEF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_DEF(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_DEFIE); +} + +/** + * @brief Check if Define List Target interrupt is enabled or disabled. + * @rmtoll IER DEFIE LL_I3C_IsEnabledIT_DEF + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_DEF(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_DEFIE) == (I3C_IER_DEFIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Define List Group Addresses interrupt. + * @rmtoll IER GRPIE LL_I3C_EnableIT_GRP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_EnableIT_GRP(I3C_TypeDef *I3Cx) +{ + SET_BIT(I3Cx->IER, I3C_IER_GRPIE); +} + +/** + * @brief Disable Define List Group Addresses interrupt. + * @rmtoll IER GRPIE LL_I3C_DisableIT_GRP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_DisableIT_GRP(I3C_TypeDef *I3Cx) +{ + CLEAR_BIT(I3Cx->IER, I3C_IER_GRPIE); +} + +/** + * @brief Check if Define List Group Addresses interrupt is enabled or disabled. + * @rmtoll IER GRPIE LL_I3C_IsEnabledIT_GRP + * @param I3Cx I3C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I3C_IsEnabledIT_GRP(const I3C_TypeDef *I3Cx) +{ + return ((READ_BIT(I3Cx->IER, I3C_IER_GRPIE) == (I3C_IER_GRPIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @addtogroup I3C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Clear Frame Complete flag (controller and target mode). + * @rmtoll CEVR CFCF LL_I3C_ClearFlag_FC + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_FC(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CFCF); +} + +/** + * @brief Clear Reception Target End flag (controller mode). + * @rmtoll CEVR CRXTGTENDF LL_I3C_ClearFlag_RXTGTEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_RXTGTEND(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CRXTGTENDF); +} + +/** + * @brief Clear Error flag (controller and target mode). + * @rmtoll CEVR CERRF LL_I3C_ClearFlag_ERR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_ERR(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CERRF); +} + +/** + * @brief Clear IBI flag (controller mode). + * @rmtoll CEVR CIBIF LL_I3C_ClearFlag_IBI + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_IBI(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CIBIF); +} + +/** + * @brief Clear IBI End flag (target mode). + * @rmtoll CEVR CIBIENDF LL_I3C_ClearFlag_IBIEND + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_IBIEND(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CIBIENDF); +} + +/** + * @brief Clear Controller-role Request flag (controller mode). + * @rmtoll CEVR CCRF LL_I3C_ClearFlag_CR + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_CR(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CCRF); +} + +/** + * @brief Clear Controller-role Request Update flag (target mode). + * @rmtoll CEVR CCRUPDF LL_I3C_ClearFlag_CRUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_CRUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CCRUPDF); +} + +/** + * @brief Clear Hot Join flag (controller mode). + * @rmtoll CEVR CHJF LL_I3C_ClearFlag_HJ + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_HJ(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CHJF); +} + +/** + * @brief Clear Wake Up flag (target mode). + * @rmtoll CEVR CWKPF LL_I3C_ClearFlag_WKP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_WKP(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CWKPF); +} + +/** + * @brief Clear Get flag (target mode). + * @rmtoll CEVR CGETF LL_I3C_ClearFlag_GET + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_GET(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CGETF); +} + +/** + * @brief Clear Get Status flag (target mode). + * @rmtoll CEVR CSTAF LL_I3C_ClearFlag_STA + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_STA(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CSTAF); +} + +/** + * @brief Clear Dynamic Address Update flag (target mode). + * @rmtoll CEVR CDAUPDF LL_I3C_ClearFlag_DAUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_DAUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CDAUPDF); +} + +/** + * @brief Clear Max Write Length flag (target mode). + * @rmtoll CEVR CMWLUPDF LL_I3C_ClearFlag_MWLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_MWLUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CMWLUPDF); +} + +/** + * @brief Clear Max Read Length flag (target mode). + * @rmtoll CEVR CMRLUPDF LL_I3C_ClearFlag_MRLUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_MRLUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CMRLUPDF); +} + +/** + * @brief Clear Reset flag (target mode). + * @rmtoll CEVR CRSTF LL_I3C_ClearFlag_RST + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_RST(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CRSTF); +} + +/** + * @brief Clear Active State flag (target mode). + * @rmtoll CEVR CASUPDF LL_I3C_ClearFlag_ASUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_ASUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CASUPDF); +} + +/** + * @brief Clear Interrupt Update flag (target mode). + * @rmtoll CEVR CINTUPDF LL_I3C_ClearFlag_INTUPD + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_INTUPD(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CINTUPDF); +} + +/** + * @brief Clear Define List Targets flag (target mode). + * @rmtoll CEVR CDEFF LL_I3C_ClearFlag_DEF + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_DEF(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CDEFF); +} + +/** + * @brief Clear Define List Group Addresses flag. + * @rmtoll CEVR CGRPF LL_I3C_ClearFlag_GRP + * @param I3Cx I3C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I3C_ClearFlag_GRP(I3C_TypeDef *I3Cx) +{ + WRITE_REG(I3Cx->CEVR, I3C_CEVR_CGRPF); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I3C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I3C_Init(I3C_TypeDef *I3Cx, LL_I3C_InitTypeDef *I3C_InitStruct, uint32_t Mode); +ErrorStatus LL_I3C_DeInit(const I3C_TypeDef *I3Cx); +void LL_I3C_StructInit(LL_I3C_InitTypeDef *I3C_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I3C1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7RSxx_LL_I3C_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_icache.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_icache.h new file mode 100644 index 000000000..c8713767f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_icache.h @@ -0,0 +1,453 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_icache.h + * @author MCD Application Team + * @brief Header file of ICACHE LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion ------------------------------------*/ +#ifndef STM32H7RSxx_LL_ICACHE_H +#define STM32H7RSxx_LL_ICACHE_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes -----------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(ICACHE) + +/** @defgroup ICACHE_LL ICACHE + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants -------------------------------------------------------*/ +/** @defgroup ICACHE_LL_Exported_Constants ICACHE Exported Constants + * @{ + */ + +/** @defgroup ICACHE_LL_EC_WaysSelection Ways selection + * @{ + */ +#define LL_ICACHE_1WAY 0U /*!< 1-way cache (direct mapped cache) */ +#define LL_ICACHE_4WAYS ICACHE_CR_WAYSEL /*!< 4-ways set associative cache (default) */ +/** + * @} + */ + +/** @defgroup ICACHE_LL_EC_Monitor_Type Monitor type + * @{ + */ +#define LL_ICACHE_MONITOR_HIT ICACHE_CR_HITMEN /*!< Hit monitor counter */ +#define LL_ICACHE_MONITOR_MISS ICACHE_CR_MISSMEN /*!< Miss monitor counter */ +#define LL_ICACHE_MONITOR_ALL (ICACHE_CR_HITMEN | ICACHE_CR_MISSMEN) /*!< All monitors counters */ +/** + * @} + */ + +/** @defgroup ICACHE_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_ICACHE_ReadReg function + * @{ + */ +#define LL_ICACHE_SR_BUSYF ICACHE_SR_BUSYF /*!< Busy flag */ +#define LL_ICACHE_SR_BSYENDF ICACHE_SR_BSYENDF /*!< Busy end flag */ +#define LL_ICACHE_SR_ERRF ICACHE_SR_ERRF /*!< Cache error flag */ +/** + * @} + */ + +/** @defgroup ICACHE_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_ICACHE_WriteReg function + * @{ + */ +#define LL_ICACHE_FCR_CBSYENDF ICACHE_FCR_CBSYENDF /*!< Busy end flag */ +#define LL_ICACHE_FCR_CERRF ICACHE_FCR_CERRF /*!< Cache error flag */ +/** + * @} + */ + +/** @defgroup ICACHE_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_ICACHE_ReadReg and LL_ICACHE_WriteReg functions + * @{ + */ +#define LL_ICACHE_IER_BSYENDIE ICACHE_IER_BSYENDIE /*!< Busy end interrupt */ +#define LL_ICACHE_IER_ERRIE ICACHE_IER_ERRIE /*!< Cache error interrupt */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros ----------------------------------------------------------*/ +/** @defgroup ICACHE_LL_Exported_Macros ICACHE Exported Macros + * @{ + */ + +/** @defgroup ICACHE_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ICACHE register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ICACHE_WriteReg(__REG__, __VALUE__) WRITE_REG(ICACHE->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ICACHE register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ICACHE_ReadReg(__REG__) READ_REG(ICACHE->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ICACHE_LL_Exported_Functions ICACHE Exported Functions + * @{ + */ + +/** @defgroup ICACHE_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable the ICACHE. + * @rmtoll CR EN LL_ICACHE_Enable + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_Enable(void) +{ + SET_BIT(ICACHE->CR, ICACHE_CR_EN); +} + +/** + * @brief Disable the ICACHE. + * @rmtoll CR EN LL_ICACHE_Disable + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_Disable(void) +{ + CLEAR_BIT(ICACHE->CR, ICACHE_CR_EN); +} + +/** + * @brief Return if ICACHE is enabled or not. + * @rmtoll CR EN LL_ICACHE_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsEnabled(void) +{ + return ((READ_BIT(ICACHE->CR, ICACHE_CR_EN) == (ICACHE_CR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Select the ICACHE operating mode. + * @rmtoll CR WAYSEL LL_ICACHE_SetMode + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_ICACHE_1WAY + * @arg @ref LL_ICACHE_4WAYS + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_SetMode(uint32_t Mode) +{ + MODIFY_REG(ICACHE->CR, ICACHE_CR_WAYSEL, Mode); +} + +/** + * @brief Get the selected ICACHE operating mode. + * @rmtoll CR WAYSEL LL_ICACHE_GetMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_ICACHE_1WAY + * @arg @ref LL_ICACHE_4WAYS + */ +__STATIC_INLINE uint32_t LL_ICACHE_GetMode(void) +{ + return (READ_BIT(ICACHE->CR, ICACHE_CR_WAYSEL)); +} + +/** + * @brief Invalidate the ICACHE. + * @note Until the BSYEND flag is set, the cache is bypassed. + * @rmtoll CR CACHEINV LL_ICACHE_Invalidate + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_Invalidate(void) +{ + SET_BIT(ICACHE->CR, ICACHE_CR_CACHEINV); +} + +/** + * @} + */ + +/** @defgroup ICACHE_LL_EF_Monitors Monitors + * @{ + */ + +/** + * @brief Enable the hit/miss monitor(s). + * @rmtoll CR HITMEN LL_ICACHE_EnableMonitors + * @rmtoll CR MISSMEN LL_ICACHE_EnableMonitors + * @param Monitors This parameter can be one or a combination of the following values: + * @arg @ref LL_ICACHE_MONITOR_HIT + * @arg @ref LL_ICACHE_MONITOR_MISS + * @arg @ref LL_ICACHE_MONITOR_ALL + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_EnableMonitors(uint32_t Monitors) +{ + SET_BIT(ICACHE->CR, Monitors); +} + +/** + * @brief Disable the hit/miss monitor(s). + * @rmtoll CR HITMEN LL_ICACHE_DisableMonitors + * @rmtoll CR MISSMEN LL_ICACHE_DisableMonitors + * @param Monitors This parameter can be one or a combination of the following values: + * @arg @ref LL_ICACHE_MONITOR_HIT + * @arg @ref LL_ICACHE_MONITOR_MISS + * @arg @ref LL_ICACHE_MONITOR_ALL + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_DisableMonitors(uint32_t Monitors) +{ + CLEAR_BIT(ICACHE->CR, Monitors); +} + +/** + * @brief Check if the monitor(s) is(are) enabled or disabled. + * @rmtoll CR HITMEN LL_ICACHE_IsEnabledMonitors + * @rmtoll CR MISSMEN LL_ICACHE_IsEnabledMonitors + * @param Monitors This parameter can be one or a combination of the following values: + * @arg @ref LL_ICACHE_MONITOR_HIT + * @arg @ref LL_ICACHE_MONITOR_MISS + * @arg @ref LL_ICACHE_MONITOR_ALL + * @retval State of parameter value (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsEnabledMonitors(uint32_t Monitors) +{ + return ((READ_BIT(ICACHE->CR, Monitors) == (Monitors)) ? 1UL : 0UL); +} + +/** + * @brief Reset the hit/miss monitor(s). + * @rmtoll CR HITMRST LL_ICACHE_ResetMonitors + * @rmtoll CR MISSMRST LL_ICACHE_ResetMonitors + * @param Monitors This parameter can be one or a combination of the following values: + * @arg @ref LL_ICACHE_MONITOR_HIT + * @arg @ref LL_ICACHE_MONITOR_MISS + * @arg @ref LL_ICACHE_MONITOR_ALL + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_ResetMonitors(uint32_t Monitors) +{ + /* Reset */ + SET_BIT(ICACHE->CR, (Monitors << 2U)); + /* Release reset */ + CLEAR_BIT(ICACHE->CR, (Monitors << 2U)); +} + +/** + * @brief Get the Hit monitor. + * @note Upon reaching the 32-bit maximum value, hit monitor does not wrap. + * @rmtoll HMONR HITMON LL_ICACHE_GetHitMonitor + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ICACHE_GetHitMonitor(void) +{ + return (ICACHE->HMONR); +} + +/** + * @brief Get the Miss monitor. + * @note Upon reaching the 16-bit maximum value, miss monitor does not wrap. + * @rmtoll MMONR MISSMON LL_ICACHE_GetMissMonitor + * @retval Value between Min_Data=0 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_ICACHE_GetMissMonitor(void) +{ + return (ICACHE->MMONR); +} + +/** + * @} + */ + +/** @defgroup ICACHE_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable BSYEND interrupt. + * @rmtoll IER BSYENDIE LL_ICACHE_EnableIT_BSYEND + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_EnableIT_BSYEND(void) +{ + SET_BIT(ICACHE->IER, ICACHE_IER_BSYENDIE); +} + +/** + * @brief Disable BSYEND interrupt. + * @rmtoll IER BSYENDIE LL_ICACHE_DisableIT_BSYEND + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_DisableIT_BSYEND(void) +{ + CLEAR_BIT(ICACHE->IER, ICACHE_IER_BSYENDIE); +} + +/** + * @brief Check if the BSYEND Interrupt is enabled or disabled. + * @rmtoll IER BSYENDIE LL_ICACHE_IsEnabledIT_BSYEND + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsEnabledIT_BSYEND(void) +{ + return ((READ_BIT(ICACHE->IER, ICACHE_IER_BSYENDIE) == (ICACHE_IER_BSYENDIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable ERR interrupt. + * @rmtoll IER ERRIE LL_ICACHE_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_EnableIT_ERR(void) +{ + SET_BIT(ICACHE->IER, ICACHE_IER_ERRIE); +} + +/** + * @brief Disable ERR interrupt. + * @rmtoll IER ERRIE LL_ICACHE_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_DisableIT_ERR(void) +{ + CLEAR_BIT(ICACHE->IER, ICACHE_IER_ERRIE); +} + +/** + * @brief Check if the ERR Interrupt is enabled or disabled. + * @rmtoll IER ERRIE LL_ICACHE_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(ICACHE->IER, ICACHE_IER_ERRIE) == (ICACHE_IER_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ICACHE_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Indicate the status of an ongoing operation flag. + * @rmtoll SR BUSYF LL_ICACHE_IsActiveFlag_BUSY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsActiveFlag_BUSY(void) +{ + return ((READ_BIT(ICACHE->SR, ICACHE_SR_BUSYF) == (ICACHE_SR_BUSYF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of an operation end flag. + * @rmtoll SR BSYEND LL_ICACHE_IsActiveFlag_BSYEND + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsActiveFlag_BSYEND(void) +{ + return ((READ_BIT(ICACHE->SR, ICACHE_SR_BSYENDF) == (ICACHE_SR_BSYENDF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of an error flag. + * @rmtoll SR ERRF LL_ICACHE_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ICACHE_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(ICACHE->SR, ICACHE_SR_ERRF) == (ICACHE_SR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Clear busy end of operation flag. + * @rmtoll FCR CBSYENDF LL_ICACHE_ClearFlag_BSYEND + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_ClearFlag_BSYEND(void) +{ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF); +} + +/** + * @brief Clear error flag. + * @rmtoll FCR ERRF LL_ICACHE_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_ICACHE_ClearFlag_ERR(void) +{ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CERRF); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ICACHE */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_ICACHE_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_iwdg.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_iwdg.h new file mode 100644 index 000000000..93ce22aa9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_iwdg.h @@ -0,0 +1,453 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_IWDG_H +#define STM32H7RSxx_LL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(IWDG) + +/** @defgroup IWDG_LL IWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants + * @{ + */ +#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */ +#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */ +#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */ +#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_IWDG_ReadReg function + * @{ + */ +#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */ +#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */ +#define LL_IWDG_SR_WVU IWDG_SR_WVU /*!< Watchdog counter window value update */ +/** + * @} + */ + +/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider + * @{ + */ +#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */ +#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */ +#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */ +#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */ +#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */ +#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */ +#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */ +#define LL_IWDG_PRESCALER_512 (IWDG_PR_PR_2 | IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 512 */ +#define LL_IWDG_PRESCALER_1024 IWDG_PR_PR_3 /*!< Divider by 1024 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions + * @{ + */ +/** @defgroup IWDG_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Start the Independent Watchdog + * @note Except if the hardware watchdog option is selected + * @rmtoll KR KEY LL_IWDG_Enable + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE); +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * @rmtoll KR KEY LL_IWDG_ReloadCounter + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD); +} + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_EnableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE); +} + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_DisableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE); +} + +/** + * @brief Select the prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_SetPrescaler + * @param IWDGx IWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @arg @ref LL_IWDG_PRESCALER_512 + * @arg @ref LL_IWDG_PRESCALER_1024 + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler) +{ + WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler); +} + +/** + * @brief Get the selected prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_GetPrescaler + * @param IWDGx IWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @arg @ref LL_IWDG_PRESCALER_512 + * @arg @ref LL_IWDG_PRESCALER_1024 + */ +__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(const IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->PR)); +} + +/** + * @brief Specify the IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_SetReloadCounter + * @param IWDGx IWDG Instance + * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter) +{ + WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter); +} + +/** + * @brief Get the specified IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_GetReloadCounter + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(const IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->RLR)); +} + +/** + * @brief Specify high limit of the window value to be compared to the down-counter. + * @rmtoll WINR WIN LL_IWDG_SetWindow + * @param IWDGx IWDG Instance + * @param Window Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetWindow(IWDG_TypeDef *IWDGx, uint32_t Window) +{ + WRITE_REG(IWDGx->WINR, IWDG_WINR_WIN & Window); +} + +/** + * @brief Get the high limit of the window value specified. + * @rmtoll WINR WIN LL_IWDG_GetWindow + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetWindow(const IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->WINR)); +} + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Specify comparator value that will be used to trig Early Wakeup interrupt + * @rmtoll EWCR EWIT LL_IWDG_SetEwiTime + * @param IWDGx IWDG Instance + * @param Time Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetEwiTime(IWDG_TypeDef *IWDGx, uint32_t Time) +{ + MODIFY_REG(IWDGx->EWCR, IWDG_EWCR_EWIT, Time); +} + +/** + * @brief Get the Early Wakeup interrupt comparator value + * @rmtoll EWCR EWIT LL_IWDG_GetEwiTime + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetEwiTime(const IWDG_TypeDef *IWDGx) +{ + return (READ_BIT(IWDGx->EWCR, IWDG_EWCR_EWIT)); +} + +/** + * @brief Enable Early wakeup interrupt + * @rmtoll EWCR EWIE LL_IWDG_EnableIT_EWI + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableIT_EWI(IWDG_TypeDef *IWDGx) +{ + SET_BIT(IWDGx->EWCR, IWDG_EWCR_EWIE); +} + +/** + * @brief Disable Early wakeup interrupt + * @rmtoll EWCR EWIE LL_IWDG_DisableIT_EWI + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableIT_EWI(IWDG_TypeDef *IWDGx) +{ + CLEAR_BIT(IWDGx->EWCR, IWDG_EWCR_EWIE); +} + +/** + * @brief Indicates whether Early wakeup interrupt is enable + * @rmtoll EWCR EWIE LL_IWDG_IsEnabledIT_EWI + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_IWDG_IsEnabledIT_EWI(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->EWCR, IWDG_EWCR_EWIE) == (IWDG_EWCR_EWIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if flag Prescaler Value Update is set or not + * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Reload Value Update is set or not + * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Window Value Update is set or not + * @rmtoll SR WVU LL_IWDG_IsActiveFlag_WVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_WVU(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_WVU) == (IWDG_SR_WVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag EWI Value Update is set or not + * @rmtoll SR EVU LL_IWDG_IsActiveFlag_EWU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_EWU(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_EWU) == (IWDG_SR_EWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if all flags Prescaler, Reload, Window & Early Interrupt Value Update are reset or not + * @rmtoll SR PVU LL_IWDG_IsReady\n + * SR RVU LL_IWDG_IsReady\n + * SR WVU LL_IWDG_IsReady\n + * SR EWU LL_IWDG_IsReady + * @param IWDGx IWDG Instance + * @retval State of bits (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsReady(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU | IWDG_SR_WVU | IWDG_SR_EWU) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Check if IWDG has been started or not + * @rmtoll SR ONF LL_IWDG_IsActiveFlag_ONF + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_ONF(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_ONF) == (IWDG_SR_ONF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Early Wakeup interrupt flag is set or not + * @rmtoll SR EWIF LL_IWDG_IsActiveFlag_EWIF + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_EWIF(const IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_EWIF) == (IWDG_SR_EWIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Early Wakeup interrupt flag + * @rmtoll EWCR EWIC LL_IWDG_ClearFlag_EWIF + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ClearFlag_EWIF(IWDG_TypeDef *IWDGx) +{ + SET_BIT(IWDGx->EWCR, IWDG_EWCR_EWIC); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* IWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_IWDG_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lptim.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lptim.h new file mode 100644 index 000000000..0b544820b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lptim.h @@ -0,0 +1,2458 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_lptim.h + * @author MCD Application Team + * @brief Header file of LPTIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_LPTIM_H +#define STM32H7RSxx_LL_LPTIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (LPTIM1) || defined (LPTIM2) || defined (LPTIM3) || defined (LPTIM4) || defined (LPTIM5) + +/** @defgroup LPTIM_LL LPTIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPTIM_LL_Private_variables LPTIM Private variables + * @{ + */ + +static const uint8_t LL_LPTIM_SHIFT_TAB_CCxP[] = +{ + 0U, /* CC1P */ + 16U /* CC2P */ +}; + +static const uint8_t LL_LPTIM_SHIFT_TAB_ICxF[] = +{ + 0U, /* IC1F */ + 16U /* IC2F */ +}; + +static const uint8_t LL_LPTIM_SHIFT_TAB_ICxPSC[] = +{ + 0U, /* IC1PSC */ + 16U /* IC2PSC */ +}; + +static const uint8_t LL_LPTIM_SHIFT_TAB_CCxSEL[] = +{ + 0U, /* CC1SEL */ + 16U /* CC2SEL */ +}; + +static const uint8_t LL_LPTIM_SHIFT_TAB_CCxE[] = +{ + LPTIM_CCMR1_CC1E_Pos, /* CC1E */ + LPTIM_CCMR1_CC2E_Pos /* CC2E */ +}; + +static const uint8_t LL_LPTIM_OFFSET_TAB_ICx[8][4] = +{ + {2, 7, 9, 13}, + {3, 5, 6, 8}, + {2, 3, 4, 5}, + {2, 2, 3, 3}, + {2, 2, 2, 2}, + {2, 2, 2, 2}, + {2, 2, 2, 2}, + {2, 2, 2, 2} + +}; + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_Private_Macros LPTIM Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_ES_INIT LPTIM Exported Init structure + * @{ + */ + +/** + * @brief LPTIM Init structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance. + This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE. + + This feature can be modified afterwards using unitary + function @ref LL_LPTIM_SetClockSource().*/ + + uint32_t Prescaler; /*!< Specifies the prescaler division ratio. + This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER. + + This feature can be modified afterwards using using unitary + function @ref LL_LPTIM_SetPrescaler().*/ + + uint32_t Waveform; /*!< Specifies the waveform shape. + This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM. + + This feature can be modified afterwards using unitary + function @ref LL_LPTIM_SetWaveform().*/ +} LL_LPTIM_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPTIM_LL_Exported_Constants LPTIM Exported Constants + * @{ + */ + +/** @defgroup LPTIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPTIM_ReadReg function + * @{ + */ +#define LL_LPTIM_ISR_CMP1OK LPTIM_ISR_CMP1OK /*!< Compare register 1 update OK */ +#define LL_LPTIM_ISR_CMP2OK LPTIM_ISR_CMP2OK /*!< Compare register 2 update OK */ +#define LL_LPTIM_ISR_CC1IF LPTIM_ISR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define LL_LPTIM_ISR_CC2IF LPTIM_ISR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define LL_LPTIM_ISR_CC1OF LPTIM_ISR_CC1OF /*!< Capture/Compare 1 over-capture flag */ +#define LL_LPTIM_ISR_CC2OF LPTIM_ISR_CC2OF /*!< Capture/Compare 2 over-capture flag */ +#define LL_LPTIM_ISR_DIEROK LPTIM_ISR_DIEROK /*!< Interrupt enable register update OK */ +#define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */ +#define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */ +#define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */ +#define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */ +#define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */ +#define LL_LPTIM_ISR_UE LPTIM_ISR_UE /*!< Update event */ +#define LL_LPTIM_ISR_REPOK LPTIM_ISR_REPOK /*!< Repetition register update OK */ +/** + * @} + */ + +/** @defgroup LPTIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions + * @{ + */ +#define LL_LPTIM_DIER_CMP1OKIE LPTIM_DIER_CMP1OKIE /*!< Compare register 1 update OK */ +#define LL_LPTIM_DIER_CMP2OKIE LPTIM_DIER_CMP2OKIE /*!< Compare register 2 update OK */ +#define LL_LPTIM_DIER_CC1IFIE LPTIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt flag */ +#define LL_LPTIM_DIER_CC2IFIE LPTIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt flag */ +#define LL_LPTIM_DIER_CC1OFIE LPTIM_DIER_CC1OIE /*!< Capture/Compare 1 over-capture flag */ +#define LL_LPTIM_DIER_CC2OFIE LPTIM_DIER_CC2OIE /*!< Capture/Compare 2 over-capture flag */ +#define LL_LPTIM_DIER_ARRMIE LPTIM_DIER_ARRMIE /*!< Autoreload match */ +#define LL_LPTIM_DIER_EXTTRIGIE LPTIM_DIER_EXTTRIGIE /*!< External trigger edge event */ +#define LL_LPTIM_DIER_ARROKIE LPTIM_DIER_ARROKIE /*!< Autoreload register update OK */ +#define LL_LPTIM_DIER_UPIE LPTIM_DIER_UPIE /*!< Counter direction change down to up */ +#define LL_LPTIM_DIER_DOWNIE LPTIM_DIER_DOWNIE /*!< Counter direction change up to down */ +#define LL_LPTIM_DIER_UEIE LPTIM_DIER_UEIE /*!< Update event */ +#define LL_LPTIM_DIER_REPOKIE LPTIM_DIER_REPOKIE /*!< Repetition register update OK */ +/** + * @} + */ + +/** @defgroup LPTIM_LL_EC_OPERATING_MODE Operating Mode + * @{ + */ +#define LL_LPTIM_OPERATING_MODE_CONTINUOUS LPTIM_CR_CNTSTRT /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPTIM register + * @param __INSTANCE__ LPTIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) + +/** + * @brief LPTimer Input Capture Get Offset(in counter step unit) + * @note The real capture value corresponding to the input capture trigger can be calculated using + * the formula hereafter : Real capture value = captured(LPTIM_CCRx) - offset + * The Offset value is depending on the glitch filter value for the channel + * and the value of the prescaler for the kernel clock. + * Please check Errata Sheet V1_8 for more details under "variable latency + * on input capture channel" section. + * @param __PSC__ This parameter can be one of the following values: + * @arg @ref LL_LPTIM_PRESCALER_DIV1 + * @arg @ref LL_LPTIM_PRESCALER_DIV2 + * @arg @ref LL_LPTIM_PRESCALER_DIV4 + * @arg @ref LL_LPTIM_PRESCALER_DIV8 + * @arg @ref LL_LPTIM_PRESCALER_DIV16 + * @arg @ref LL_LPTIM_PRESCALER_DIV32 + * @arg @ref LL_LPTIM_PRESCALER_DIV64 + * @arg @ref LL_LPTIM_PRESCALER_DIV128 + * @param __FLT__ This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV1 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV2 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV4 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV8 + * @retval offset value + */ +#define LL_LPTIM_IC_GET_OFFSET(__PSC__, __FLT__) LL_LPTIM_OFFSET_TAB_ICx\ + [((__PSC__) & LPTIM_CFGR_PRESC_Msk) >> LPTIM_CFGR_PRESC_Pos]\ + [((__FLT__) & LPTIM_CCMR1_IC1F_Msk) >> LPTIM_CCMR1_IC1F_Pos] +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPTIM_LL_Exported_Functions LPTIM Exported Functions + * @{ + */ + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +#define LL_LPTIM_ClearFLAG_CMPM LL_LPTIM_ClearFlag_CMPM +#define LL_LPTIM_ClearFLAG_CC1 LL_LPTIM_ClearFlag_CC1 +#define LL_LPTIM_ClearFLAG_CC2 LL_LPTIM_ClearFlag_CC2 +#define LL_LPTIM_ClearFLAG_CC1O LL_LPTIM_ClearFlag_CC1O +#define LL_LPTIM_ClearFLAG_CC2O LL_LPTIM_ClearFlag_CC2O +#define LL_LPTIM_ClearFLAG_ARRM LL_LPTIM_ClearFlag_ARRM +/** +@endcond + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPTIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_LPTIM_DeInit(const LPTIM_TypeDef *LPTIMx); +void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct); +ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, const LL_LPTIM_InitTypeDef *LPTIM_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup LPTIM_LL_EF_LPTIM_Configuration LPTIM Configuration + * @{ + */ + +/** + * @brief Enable the LPTIM instance + * @note After setting the ENABLE bit, a delay of two counter clock is needed + * before the LPTIM instance is actually enabled. + * @rmtoll CR ENABLE LL_LPTIM_Enable + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); +} + +/** + * @brief Disable the LPTIM instance + * @rmtoll CR ENABLE LL_LPTIM_Disable + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); +} + +/** + * @brief Indicates whether the LPTIM instance is enabled. + * @rmtoll CR ENABLE LL_LPTIM_IsEnabled + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == LPTIM_CR_ENABLE) ? 1UL : 0UL)); +} + +/** + * @brief Starts the LPTIM counter in the desired mode. + * @note LPTIM instance must be enabled before starting the counter. + * @note It is possible to change on the fly from One Shot mode to + * Continuous mode. + * @rmtoll CR CNTSTRT LL_LPTIM_StartCounter\n + * CR SNGSTRT LL_LPTIM_StartCounter + * @param LPTIMx Low-Power Timer instance + * @param OperatingMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OPERATING_MODE_CONTINUOUS + * @arg @ref LL_LPTIM_OPERATING_MODE_ONESHOT + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_StartCounter(LPTIM_TypeDef *LPTIMx, uint32_t OperatingMode) +{ + MODIFY_REG(LPTIMx->CR, LPTIM_CR_CNTSTRT | LPTIM_CR_SNGSTRT, OperatingMode); +} + +/** + * @brief Enable reset after read. + * @note After calling this function any read access to LPTIM_CNT + * register will asynchronously reset the LPTIM_CNT register content. + * @rmtoll CR RSTARE LL_LPTIM_EnableResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableResetAfterRead(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_RSTARE); +} + +/** + * @brief Disable reset after read. + * @rmtoll CR RSTARE LL_LPTIM_DisableResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableResetAfterRead(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CR, LPTIM_CR_RSTARE); +} + +/** + * @brief Indicate whether the reset after read feature is enabled. + * @rmtoll CR RSTARE LL_LPTIM_IsEnabledResetAfterRead + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledResetAfterRead(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_RSTARE) == LPTIM_CR_RSTARE) ? 1UL : 0UL)); +} + +/** + * @brief Reset of the LPTIM_CNT counter register (synchronous). + * @note Due to the synchronous nature of this reset, it only takes + * place after a synchronization delay of 3 LPTIM core clock cycles + * (LPTIM core clock may be different from APB clock). + * @note COUNTRST is automatically cleared by hardware + * @rmtoll CR COUNTRST LL_LPTIM_ResetCounter\n + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ResetCounter(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CR, LPTIM_CR_COUNTRST); +} + +/** + * @brief Set the LPTIM registers update mode (enable/disable register preload) + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR PRELOAD LL_LPTIM_SetUpdateMode + * @param LPTIMx Low-Power Timer instance + * @param UpdateMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE + * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetUpdateMode(LPTIM_TypeDef *LPTIMx, uint32_t UpdateMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD, UpdateMode); +} + +/** + * @brief Get the LPTIM registers update mode + * @rmtoll CFGR PRELOAD LL_LPTIM_GetUpdateMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE + * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD)); +} + +/** + * @brief Set the auto reload value + * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled + * @note After a write to the LPTIMx_ARR register a new write operation to the + * same register can only be performed when the previous write operation + * is completed. Any successive write before the ARROK flag is set, will + * lead to unpredictable results. + * @note autoreload value be strictly greater than the compare value. + * @rmtoll ARR ARR LL_LPTIM_SetAutoReload + * @param LPTIMx Low-Power Timer instance + * @param AutoReload Value between Min_Data=0x0001 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetAutoReload(LPTIM_TypeDef *LPTIMx, uint32_t AutoReload) +{ + MODIFY_REG(LPTIMx->ARR, LPTIM_ARR_ARR, AutoReload); +} + +/** + * @brief Get actual auto reload value + * @rmtoll ARR ARR LL_LPTIM_GetAutoReload + * @param LPTIMx Low-Power Timer instance + * @retval AutoReload Value between Min_Data=0x0001 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->ARR, LPTIM_ARR_ARR)); +} + +/** + * @brief Set the repetition value + * @note The LPTIMx_RCR register content must only be modified when the LPTIM is enabled + * @rmtoll RCR REP LL_LPTIM_SetRepetition + * @param LPTIMx Low-Power Timer instance + * @param Repetition Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetRepetition(LPTIM_TypeDef *LPTIMx, uint32_t Repetition) +{ + MODIFY_REG(LPTIMx->RCR, LPTIM_RCR_REP, Repetition); +} + +/** + * @brief Get the repetition value + * @rmtoll RCR REP LL_LPTIM_GetRepetition + * @param LPTIMx Low-Power Timer instance + * @retval Repetition Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetRepetition(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->RCR, LPTIM_RCR_REP)); +} + +/** + * @brief Enable capture/compare channel. + * @rmtoll CCMR1 CC1E LL_LPTIM_CC_EnableChannel\n + * CCMR1 CC2E LL_LPTIM_CC_EnableChannel + * @param LPTIMx LPTimer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_CC_EnableChannel(LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + SET_BIT(LPTIMx->CCMR1, 0x1UL << LL_LPTIM_SHIFT_TAB_CCxE[Channel]); +} + +/** + * @brief Disable capture/compare channel. + * @rmtoll CCMR1 CC1E LL_LPTIM_CC_DisableChannel\n + * CCMR1 CC2E LL_LPTIM_CC_DisableChannel + * @param LPTIMx LPTimer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_CC_DisableChannel(LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + CLEAR_BIT(LPTIMx->CCMR1, 0x1UL << LL_LPTIM_SHIFT_TAB_CCxE[Channel]); +} + +/** + * @brief Indicate whether channel is enabled. + * @rmtoll CCMR1 CC1E LL_LPTIM_CC_IsEnabledChannel\n + * CCMR1 CC2E LL_LPTIM_CC_IsEnabledChannel + * @param LPTIMx LPTimer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_CC_IsEnabledChannel(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + return ((READ_BIT(LPTIMx->CCMR1, 0x1UL << LL_LPTIM_SHIFT_TAB_CCxE[Channel]) == \ + (0x1UL << LL_LPTIM_SHIFT_TAB_CCxE[Channel])) ? 1UL : 0UL); + +} + +/** + * @brief Set the compare value + * @note After a write to the LPTIMx_CCR1 register a new write operation to the + * same register can only be performed when the previous write operation + * is completed. Any successive write before the CMP1OK flag is set, will + * lead to unpredictable results. + * @rmtoll CCR1 CCR1 LL_LPTIM_OC_SetCompareCH1 + * @param LPTIMx Low-Power Timer instance + * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_OC_SetCompareCH1(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue) +{ + MODIFY_REG(LPTIMx->CCR1, LPTIM_CCR1_CCR1, CompareValue); +} + +/** + * @brief Get actual compare value + * @rmtoll CCR1 CCR1 LL_LPTIM_OC_GetCompareCH1 + * @param LPTIMx Low-Power Timer instance + * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_OC_GetCompareCH1(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CCR1, LPTIM_CCR1_CCR1)); +} + +/** + * @brief Set the compare value + * @note After a write to the LPTIMx_CCR2 register a new write operation to the + * same register can only be performed when the previous write operation + * is completed. Any successive write before the CMP2OK flag is set, will + * lead to unpredictable results. + * @rmtoll CCR2 CCR2 LL_LPTIM_OC_SetCompareCH2 + * @param LPTIMx Low-Power Timer instance + * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_OC_SetCompareCH2(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue) +{ + MODIFY_REG(LPTIMx->CCR2, LPTIM_CCR2_CCR2, CompareValue); +} + +/** + * @brief Get actual compare value + * @rmtoll CCR2 CCR2 LL_LPTIM_OC_GetCompareCH2 + * @param LPTIMx Low-Power Timer instance + * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_LPTIM_OC_GetCompareCH2(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CCR2, LPTIM_CCR2_CCR2)); +} + +/** + * @brief Get actual counter value + * @note When the LPTIM instance is running with an asynchronous clock, reading + * the LPTIMx_CNT register may return unreliable values. So in this case + * it is necessary to perform two consecutive read accesses and verify + * that the two returned values are identical. + * @rmtoll CNT CNT LL_LPTIM_GetCounter + * @param LPTIMx Low-Power Timer instance + * @retval Counter value + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetCounter(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CNT, LPTIM_CNT_CNT)); +} + +/** + * @brief Set the counter mode (selection of the LPTIM counter clock source). + * @note The counter mode can be set only when the LPTIM instance is disabled. + * @rmtoll CFGR COUNTMODE LL_LPTIM_SetCounterMode + * @param LPTIMx Low-Power Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL + * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetCounterMode(LPTIM_TypeDef *LPTIMx, uint32_t CounterMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE, CounterMode); +} + +/** + * @brief Get the counter mode + * @rmtoll CFGR COUNTMODE LL_LPTIM_GetCounterMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL + * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetCounterMode(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE)); +} + +/** + * @brief Set waveform shape + * @rmtoll CFGR WAVE LL_LPTIM_SetWaveform + * @param LPTIMx Low-Power Timer instance + * @param Waveform This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetWaveform(LPTIM_TypeDef *LPTIMx, uint32_t Waveform) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE, Waveform); +} + +/** + * @brief Get actual waveform shape + * @rmtoll CFGR WAVE LL_LPTIM_GetWaveform + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM + * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetWaveform(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVE)); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCMR1 CC1P LL_LPTIM_OC_SetPolarity\n + * @rmtoll CCMR1 CC2P LL_LPTIM_OC_SetPolarity\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_OC_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Channel, uint32_t Polarity) +{ + if ((LPTIMx == LPTIM4) || (LPTIMx == LPTIM5)) + { + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL, ((Polarity >> LPTIM_CCMR1_CC1P_Pos) << LPTIM_CFGR_WAVPOL_Pos)); + } + else + { + MODIFY_REG(LPTIMx->CCMR1, (LPTIM_CCMR1_CC1P << LL_LPTIM_SHIFT_TAB_CCxP[Channel]), + (Polarity << LL_LPTIM_SHIFT_TAB_CCxP[Channel])); + } +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCMR1 CC1P LL_LPTIM_OC_GetPolarity\n + * @rmtoll CCMR1 CC2P LL_LPTIM_OC_GetPolarity\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR + * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE + */ +__STATIC_INLINE uint32_t LL_LPTIM_OC_GetPolarity(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + if ((LPTIMx == LPTIM4) || (LPTIMx == LPTIM5)) + { + return (uint32_t)((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL) >> LPTIM_CFGR_WAVPOL_Pos) << LPTIM_CCMR1_CC1P_Pos); + } + else + { + return (uint32_t)(READ_BIT(LPTIMx->CCMR1, LPTIM_CCMR1_CC1P << LL_LPTIM_SHIFT_TAB_CCxP[Channel]) >> \ + LL_LPTIM_SHIFT_TAB_CCxP[Channel]); + } +} + +/** + * @brief Set actual prescaler division ratio. + * @note This function must be called when the LPTIM instance is disabled. + * @note When the LPTIM is configured to be clocked by an internal clock source + * and the LPTIM counter is configured to be updated by active edges + * detected on the LPTIM external Input1, the internal clock provided to + * the LPTIM must be not be prescaled. + * @rmtoll CFGR PRESC LL_LPTIM_SetPrescaler + * @param LPTIMx Low-Power Timer instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_LPTIM_PRESCALER_DIV1 + * @arg @ref LL_LPTIM_PRESCALER_DIV2 + * @arg @ref LL_LPTIM_PRESCALER_DIV4 + * @arg @ref LL_LPTIM_PRESCALER_DIV8 + * @arg @ref LL_LPTIM_PRESCALER_DIV16 + * @arg @ref LL_LPTIM_PRESCALER_DIV32 + * @arg @ref LL_LPTIM_PRESCALER_DIV64 + * @arg @ref LL_LPTIM_PRESCALER_DIV128 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Prescaler) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRESC, Prescaler); +} + +/** + * @brief Get actual prescaler division ratio. + * @rmtoll CFGR PRESC LL_LPTIM_GetPrescaler + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_PRESCALER_DIV1 + * @arg @ref LL_LPTIM_PRESCALER_DIV2 + * @arg @ref LL_LPTIM_PRESCALER_DIV4 + * @arg @ref LL_LPTIM_PRESCALER_DIV8 + * @arg @ref LL_LPTIM_PRESCALER_DIV16 + * @arg @ref LL_LPTIM_PRESCALER_DIV32 + * @arg @ref LL_LPTIM_PRESCALER_DIV64 + * @arg @ref LL_LPTIM_PRESCALER_DIV128 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRESC)); +} + +/** + * @brief Set LPTIM input 1 source (default GPIO). + * @rmtoll CFGR2 IN1SEL LL_LPTIM_SetInput1Src + * @param LPTIMx Low-Power Timer instance + * @param Src This parameter can be one of the following values: + * @arg @ref LL_LPTIM_INPUT1_SRC_GPIO + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) +{ + MODIFY_REG(LPTIMx->CFGR2, LPTIM_CFGR2_IN1SEL, Src); +} + +/** + * @brief Set LPTIM input 2 source (default GPIO). + * @rmtoll CFGR2 IN2SEL LL_LPTIM_SetInput2Src + * @param LPTIMx Low-Power Timer instance + * @param Src This parameter can be one of the following values: + * @arg @ref LL_LPTIM_INPUT2_SRC_GPIO + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetInput2Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) +{ + MODIFY_REG(LPTIMx->CFGR2, LPTIM_CFGR2_IN2SEL, Src); +} + +/** + * @brief Set LPTIM input source (default GPIO). + * @rmtoll CFGR2 IC1SEL LL_LPTIM_SetRemap + * @rmtoll CFGR2 IC2SEL LL_LPTIM_SetRemap + * @param LPTIMx Low-Power Timer instance + * @param Src This parameter can be one of the following values: + * @arg @ref LL_LPTIM_LPTIM1_IC1_RMP_GPIO + * @arg @ref LL_LPTIM_LPTIM1_IC2_RMP_GPIO + * @arg @ref LL_LPTIM_LPTIM1_IC2_RMP_LSI + * @arg @ref LL_LPTIM_LPTIM1_IC2_RMP_LSE + * @arg @ref LL_LPTIM_LPTIM2_IC1_RMP_GPIO + * @arg @ref LL_LPTIM_LPTIM2_IC2_RMP_GPIO + * @arg @ref LL_LPTIM_LPTIM2_IC2_RMP_HSI_1024 + * @arg @ref LL_LPTIM_LPTIM2_IC2_RMP_CSI_128 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetRemap(LPTIM_TypeDef *LPTIMx, uint32_t Src) +{ + MODIFY_REG(LPTIMx->CFGR2, LPTIM_CFGR2_IC1SEL | LPTIM_CFGR2_IC2SEL, Src); +} + +/** + * @brief Set the polarity of IC channel 1. + * @rmtoll CCMR1 CC1P LL_LPTIM_IC_SetPolarity\n + * @rmtoll CCMR1 CC2P LL_LPTIM_IC_SetPolarity\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ICPOLARITY_RISING + * @arg @ref LL_LPTIM_ICPOLARITY_FALLING + * @arg @ref LL_LPTIM_ICPOLARITY_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_IC_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Channel, uint32_t Polarity) +{ + MODIFY_REG(LPTIMx->CCMR1, LPTIM_CCMR1_CC1P << LL_LPTIM_SHIFT_TAB_CCxP[Channel], + Polarity << LL_LPTIM_SHIFT_TAB_CCxP[Channel]); +} + +/** + * @brief Get the polarity of IC channels. + * @rmtoll CCMR1 CC1P LL_LPTIM_IC_GetPolarity\n + * @rmtoll CCMR1 CC2P LL_LPTIM_IC_GetPolarity\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_ICPOLARITY_RISING + * @arg @ref LL_LPTIM_ICPOLARITY_FALLING + * @arg @ref LL_LPTIM_ICPOLARITY_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_IC_GetPolarity(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + return (uint32_t)((READ_BIT(LPTIMx->CCMR1, LPTIM_CCMR1_CC1P << LL_LPTIM_SHIFT_TAB_CCxP[Channel])) >> \ + LL_LPTIM_SHIFT_TAB_CCxP[Channel]); + +} + +/** + * @brief Set the filter of IC channels. + * @rmtoll CCMR1 IC1F LL_LPTIM_IC_SetFilter\n + * @rmtoll CCMR1 IC2F LL_LPTIM_IC_SetFilter\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @param Filter This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV1 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV2 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV4 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_IC_SetFilter(LPTIM_TypeDef *LPTIMx, uint32_t Channel, uint32_t Filter) +{ + MODIFY_REG(LPTIMx->CCMR1, LPTIM_CCMR1_IC1F << LL_LPTIM_SHIFT_TAB_ICxF[Channel], + Filter << LL_LPTIM_SHIFT_TAB_ICxF[Channel]); +} + +/** + * @brief Get the filter of IC channels. + * @rmtoll CCMR1 IC1F LL_LPTIM_IC_GetFilter\n + * @rmtoll CCMR1 IC2F LL_LPTIM_IC_GetFilter\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV1 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV2 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV4 + * @arg @ref LL_LPTIM_ICFLT_CLOCK_DIV8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_IC_GetFilter(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + return (uint32_t)((READ_BIT(LPTIMx->CCMR1, LPTIM_CCMR1_IC1F << LL_LPTIM_SHIFT_TAB_ICxF[Channel])) >> \ + LL_LPTIM_SHIFT_TAB_ICxF[Channel]); +} + +/** + * @brief Set the prescaler of IC channels. + * @rmtoll CCMR1 IC1PSC LL_LPTIM_IC_SetPrescaler\n + * @rmtoll CCMR1 IC2PSC LL_LPTIM_IC_SetPrescaler\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ICPSC_DIV1 + * @arg @ref LL_LPTIM_ICPSC_DIV2 + * @arg @ref LL_LPTIM_ICPSC_DIV4 + * @arg @ref LL_LPTIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_IC_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Channel, uint32_t Prescaler) +{ + MODIFY_REG(LPTIMx->CCMR1, LPTIM_CCMR1_IC1PSC << LL_LPTIM_SHIFT_TAB_ICxPSC[Channel], + Prescaler << LL_LPTIM_SHIFT_TAB_ICxPSC[Channel]); +} + +/** + * @brief Get the prescaler of IC channels. + * @rmtoll CCMR1 IC1PSC LL_LPTIM_IC_GetPrescaler\n + * @rmtoll CCMR1 IC2PSC LL_LPTIM_IC_GetPrescaler\n + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_ICPSC_DIV1 + * @arg @ref LL_LPTIM_ICPSC_DIV2 + * @arg @ref LL_LPTIM_ICPSC_DIV4 + * @arg @ref LL_LPTIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_IC_GetPrescaler(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + return (uint32_t)((READ_BIT(LPTIMx->CCMR1, LPTIM_CCMR1_IC1PSC << LL_LPTIM_SHIFT_TAB_ICxPSC[Channel])) >> \ + LL_LPTIM_SHIFT_TAB_ICxPSC[Channel]); +} + +/** + * @brief Set the Channel Mode. + * @rmtoll CCMR1 CC1SEL LL_LPTIM_CC_SetChannelMode\n + * CCMR1 CC2SEL LL_LPTIM_CC_SetChannelMode + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @param CCMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CCMODE_OUTPUT_PWM + * @arg @ref LL_LPTIM_CCMODE_INPUTCAPTURE + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_CC_SetChannelMode(LPTIM_TypeDef *LPTIMx, uint32_t Channel, uint32_t CCMode) +{ + SET_BIT(LPTIMx->CCMR1, CCMode << LL_LPTIM_SHIFT_TAB_CCxSEL[Channel]); +} + +/** + * @brief Get the Channel Mode. + * @rmtoll CCMR1 CC1SEL LL_LPTIM_CC_GetChannelMode\n + * CCMR1 CC2SEL LL_LPTIM_CC_GetChannelMode + * @param LPTIMx Low-Power Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CHANNEL_CH1 + * @arg @ref LL_LPTIM_CHANNEL_CH2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CCMODE_OUTPUT_PWM + * @arg @ref LL_LPTIM_CCMODE_INPUTCAPTURE + */ +__STATIC_INLINE uint32_t LL_LPTIM_CC_GetChannelMode(const LPTIM_TypeDef *LPTIMx, uint32_t Channel) +{ + return (uint32_t)((READ_BIT(LPTIMx->CCMR1, LPTIM_CCMR1_CC1SEL << LL_LPTIM_SHIFT_TAB_CCxSEL[Channel])) >> \ + LL_LPTIM_SHIFT_TAB_CCxSEL[Channel]); +} + +/** + * @brief Get captured value for input channel 1. + * @rmtoll CCR1 CCR1 LL_LPTIM_IC_GetCaptureCH1 + * @note The real capture value corresponding to the input capture trigger can be calculated using + * the formula hereafter : Real capture value = captured(LPTIM_CCRx) - offset + * where offset can be retrieved by calling @ref LL_LPTIM_IC_GET_OFFSET + * @param LPTIMx Low-Power Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_LPTIM_IC_GetCaptureCH1(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CCR1, LPTIM_CCR1_CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @rmtoll CCR2 CCR2 LL_LPTIM_IC_GetCaptureCH2 + * @note The real capture value corresponding to the input capture trigger can be calculated using + * the formula hereafter : Real capture value = captured(LPTIM_CCRx) - offset + * where offset can be retrieved by calling @ref LL_LPTIM_IC_GET_OFFSET + * @param LPTIMx Low-Power Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_LPTIM_IC_GetCaptureCH2(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CCR2, LPTIM_CCR2_CCR2)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Trigger_Configuration Trigger Configuration + * @{ + */ + +/** + * @brief Enable the timeout function + * @note This function must be called when the LPTIM instance is disabled. + * @note The first trigger event will start the timer, any successive trigger + * event will reset the counter and the timer will restart. + * @note The timeout value corresponds to the compare value; if no trigger + * occurs within the expected time frame, the MCU is waked-up by the + * compare match event. + * @rmtoll CFGR TIMOUT LL_LPTIM_EnableTimeout + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableTimeout(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); +} + +/** + * @brief Disable the timeout function + * @note This function must be called when the LPTIM instance is disabled. + * @note A trigger event arriving when the timer is already started will be + * ignored. + * @rmtoll CFGR TIMOUT LL_LPTIM_DisableTimeout + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); +} + +/** + * @brief Indicate whether the timeout function is enabled. + * @rmtoll CFGR TIMOUT LL_LPTIM_IsEnabledTimeout + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == LPTIM_CFGR_TIMOUT) ? 1UL : 0UL)); +} + +/** + * @brief Start the LPTIM counter + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR TRIGEN LL_LPTIM_TrigSw + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN); +} + +/** + * @brief Configure the external trigger used as a trigger event for the LPTIM. + * @note This function must be called when the LPTIM instance is disabled. + * @note An internal clock source must be present when a digital filter is + * required for the trigger. + * @rmtoll CFGR TRIGSEL LL_LPTIM_ConfigTrigger\n + * CFGR TRGFLT LL_LPTIM_ConfigTrigger\n + * CFGR TRIGEN LL_LPTIM_ConfigTrigger + * @param LPTIMx Low-Power Timer instance + * @param Source This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI1_FS_A + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI1_FS_B + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI2_FS_A + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI2_FS_B + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM4 + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM5 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM3_CH1 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM5 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM3_CH1 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM4 + * @param Filter This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_FILTER_NONE + * @arg @ref LL_LPTIM_TRIG_FILTER_2 + * @arg @ref LL_LPTIM_TRIG_FILTER_4 + * @arg @ref LL_LPTIM_TRIG_FILTER_8 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING + * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Source, uint32_t Filter, uint32_t Polarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL | LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGEN, Source | Filter | Polarity); +} + +/** + * @brief Get actual external trigger source. + * @rmtoll CFGR TRIGSEL LL_LPTIM_GetTriggerSource + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI1_FS_A + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI1_FS_B + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI2_FS_A + * @arg @ref LL_LPTIM_TRIG_SOURCE_SAI2_FS_B + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM4 + * @arg @ref LL_LPTIM3_TRIG_SOURCE_LPTIM5 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM3_CH1 + * @arg @ref LL_LPTIM4_TRIG_SOURCE_LPTIM5 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM2_CH1 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM3_CH1 + * @arg @ref LL_LPTIM5_TRIG_SOURCE_LPTIM4 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL)); +} + +/** + * @brief Get actual external trigger filter. + * @rmtoll CFGR TRGFLT LL_LPTIM_GetTriggerFilter + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_FILTER_NONE + * @arg @ref LL_LPTIM_TRIG_FILTER_2 + * @arg @ref LL_LPTIM_TRIG_FILTER_4 + * @arg @ref LL_LPTIM_TRIG_FILTER_8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerFilter(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRGFLT)); +} + +/** + * @brief Get actual external trigger polarity. + * @rmtoll CFGR TRIGEN LL_LPTIM_GetTriggerPolarity + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING + * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING + * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerPolarity(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Clock_Configuration Clock Configuration + * @{ + */ + +/** + * @brief Set the source of the clock used by the LPTIM instance. + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR CKSEL LL_LPTIM_SetClockSource + * @param LPTIMx Low-Power Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL + * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetClockSource(LPTIM_TypeDef *LPTIMx, uint32_t ClockSource) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKSEL, ClockSource); +} + +/** + * @brief Get actual LPTIM instance clock source. + * @rmtoll CFGR CKSEL LL_LPTIM_GetClockSource + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL + * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKSEL)); +} + +/** + * @brief Configure the active edge or edges used by the counter when + the LPTIM is clocked by an external clock source. + * @note This function must be called when the LPTIM instance is disabled. + * @note When both external clock signal edges are considered active ones, + * the LPTIM must also be clocked by an internal clock source with a + * frequency equal to at least four times the external clock frequency. + * @note An internal clock source must be present when a digital filter is + * required for external clock. + * @rmtoll CFGR CKFLT LL_LPTIM_ConfigClock\n + * CFGR CKPOL LL_LPTIM_ConfigClock + * @param LPTIMx Low-Power Timer instance + * @param ClockFilter This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_FILTER_NONE + * @arg @ref LL_LPTIM_CLK_FILTER_2 + * @arg @ref LL_LPTIM_CLK_FILTER_4 + * @arg @ref LL_LPTIM_CLK_FILTER_8 + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING + * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ConfigClock(LPTIM_TypeDef *LPTIMx, uint32_t ClockFilter, uint32_t ClockPolarity) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKFLT | LPTIM_CFGR_CKPOL, ClockFilter | ClockPolarity); +} + +/** + * @brief Get actual clock polarity + * @rmtoll CFGR CKPOL LL_LPTIM_GetClockPolarity + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING + * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING + * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockPolarity(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); +} + +/** + * @brief Get actual clock digital filter + * @rmtoll CFGR CKFLT LL_LPTIM_GetClockFilter + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_CLK_FILTER_NONE + * @arg @ref LL_LPTIM_CLK_FILTER_2 + * @arg @ref LL_LPTIM_CLK_FILTER_4 + * @arg @ref LL_LPTIM_CLK_FILTER_8 + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetClockFilter(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKFLT)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_Encoder_Mode Encoder Mode + * @{ + */ + +/** + * @brief Configure the encoder mode. + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR CKPOL LL_LPTIM_SetEncoderMode + * @param LPTIMx Low-Power Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING + * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_SetEncoderMode(LPTIM_TypeDef *LPTIMx, uint32_t EncoderMode) +{ + MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKPOL, EncoderMode); +} + +/** + * @brief Get actual encoder mode. + * @rmtoll CFGR CKPOL LL_LPTIM_GetEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING + * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING + * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_LPTIM_GetEncoderMode(const LPTIM_TypeDef *LPTIMx) +{ + return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); +} + +/** + * @brief Enable the encoder mode + * @note This function must be called when the LPTIM instance is disabled. + * @note In this mode the LPTIM instance must be clocked by an internal clock + * source. Also, the prescaler division ratio must be equal to 1. + * @note LPTIM instance must be configured in continuous mode prior enabling + * the encoder mode. + * @rmtoll CFGR ENC LL_LPTIM_EnableEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); +} + +/** + * @brief Disable the encoder mode + * @note This function must be called when the LPTIM instance is disabled. + * @rmtoll CFGR ENC LL_LPTIM_DisableEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); +} + +/** + * @brief Indicates whether the LPTIM operates in encoder mode. + * @rmtoll CFGR ENC LL_LPTIM_IsEnabledEncoderMode + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == LPTIM_CFGR_ENC) ? 1UL : 0UL)); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear the compare match flag for channel 1 (CC1CF) + * @rmtoll ICR CC1CF LL_LPTIM_ClearFlag_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CC1(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CC1CF); +} + +/** + * @brief Inform application whether a capture/compare interrupt has occurred for channel 1. + * @rmtoll ISR CC1IF LL_LPTIM_IsActiveFlag_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CC1(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CC1IF) == LPTIM_ISR_CC1IF) ? 1UL : 0UL)); +} + +/** + * @brief Clear the compare match flag for channel 2 (CC2CF) + * @rmtoll ICR CC2CF LL_LPTIM_ClearFlag_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CC2(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CC2CF); +} + +/** + * @brief Inform application whether a capture/compare interrupt has occurred for channel 2. + * @rmtoll ISR CC2IF LL_LPTIM_IsActiveFlag_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CC2(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CC2IF) == LPTIM_ISR_CC2IF) ? 1UL : 0UL)); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture flag for channel 1 (CC1OCF) + * @rmtoll ICR CC1OCF LL_LPTIM_ClearFlag_CC1O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CC1O(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CC1OCF); +} + +/** + * @brief Inform application whether a Capture/Compare 1 over-capture has occurred for channel 1. + * @rmtoll ISR CC1OF LL_LPTIM_IsActiveFlag_CC1O + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CC1O(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CC1OF) == LPTIM_ISR_CC1OF) ? 1UL : 0UL)); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture flag for channel 2 (CC2OCF) + * @rmtoll ICR CC2OCF LL_LPTIM_ClearFlag_CC2O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CC2O(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CC2OCF); +} + +/** + * @brief Inform application whether a Capture/Compare 2 over-capture has occurred for channel 2. + * @rmtoll ISR CC2OF LL_LPTIM_IsActiveFlag_CC2O + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CC2O(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CC2OF) == LPTIM_ISR_CC2OF) ? 1UL : 0UL)); +} +/** + * @brief Clear the autoreload match flag (ARRMCF) + * @rmtoll ICR ARRMCF LL_LPTIM_ClearFlag_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_ARRM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARRMCF); +} + +/** + * @brief Inform application whether a autoreload match interrupt has occurred. + * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == LPTIM_ISR_ARRM) ? 1UL : 0UL)); +} + +/** + * @brief Clear the external trigger valid edge flag(EXTTRIGCF). + * @rmtoll ICR EXTTRIGCF LL_LPTIM_ClearFlag_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_EXTTRIGCF); +} + +/** + * @brief Inform application whether a valid edge on the selected external trigger input has occurred. + * @rmtoll ISR EXTTRIG LL_LPTIM_IsActiveFlag_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == LPTIM_ISR_EXTTRIG) ? 1UL : 0UL)); +} + +/** + * @brief Clear the compare register update interrupt flag (CMP1OKCF). + * @rmtoll ICR CMP1OKCF LL_LPTIM_ClearFlag_CMP1OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CMP1OK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMP1OKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_CCR1 register has been successfully + completed. If so, a new one can be initiated. + * @rmtoll ISR CMP1OK LL_LPTIM_IsActiveFlag_CMP1OK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMP1OK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMP1OK) == LPTIM_ISR_CMP1OK) ? 1UL : 0UL)); +} + +/** + * @brief Clear the compare register update interrupt flag (CMP2OKCF). + * @rmtoll ICR CMP2OKCF LL_LPTIM_ClearFlag_CMP2OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_CMP2OK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMP2OKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_CCR2 register has been successfully + completed. If so, a new one can be initiated. + * @rmtoll ISR CMP2OK LL_LPTIM_IsActiveFlag_CMP2OK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMP2OK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMP2OK) == LPTIM_ISR_CMP2OK) ? 1UL : 0UL)); +} + +/** + * @brief Clear the interrupt register update interrupt flag (DIEROKCF). + * @rmtoll ICR DIEROKCF LL_LPTIM_ClearFlag_DIEROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_DIEROK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_DIEROKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_DIER register has been successfully + completed. If so, a new one can be initiated. + * @rmtoll ISR DIEROK LL_LPTIM_IsActiveFlag_DIEROK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DIEROK(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DIEROK) == (LPTIM_ISR_DIEROK)) ? 1UL : 0UL); +} + +/** + * @brief Clear the autoreload register update interrupt flag (ARROKCF). + * @rmtoll ICR ARROKCF LL_LPTIM_ClearFlag_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARROKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully + completed. If so, a new one can be initiated. + * @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == LPTIM_ISR_ARROK) ? 1UL : 0UL)); +} + +/** + * @brief Clear the counter direction change to up interrupt flag (UPCF). + * @rmtoll ICR UPCF LL_LPTIM_ClearFlag_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_UPCF); +} + +/** + * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance + operates in encoder mode). + * @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == LPTIM_ISR_UP) ? 1UL : 0UL)); +} + +/** + * @brief Clear the counter direction change to down interrupt flag (DOWNCF). + * @rmtoll ICR DOWNCF LL_LPTIM_ClearFlag_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_DOWNCF); +} + +/** + * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance + operates in encoder mode). + * @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == LPTIM_ISR_DOWN) ? 1UL : 0UL)); +} + +/** + * @brief Clear the repetition register update interrupt flag (REPOKCF). + * @rmtoll ICR REPOKCF LL_LPTIM_ClearFlag_REPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_REPOK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_REPOKCF); +} + +/** + * @brief Informs application whether the APB bus write operation to the LPTIMx_RCR register has been successfully + completed; If so, a new one can be initiated. + * @rmtoll ISR REPOK LL_LPTIM_IsActiveFlag_REPOK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_REPOK(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->ISR, LPTIM_ISR_REPOK) == (LPTIM_ISR_REPOK)) ? 1UL : 0UL); +} + +/** + * @brief Clear the update event flag (UECF). + * @rmtoll ICR UECF LL_LPTIM_ClearFlag_UE + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_ClearFlag_UE(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->ICR, LPTIM_ICR_UECF); +} + +/** + * @brief Informs application whether the LPTIMx update event has occurred. + * @rmtoll ISR UE LL_LPTIM_IsActiveFlag_UE + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UE(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UE) == (LPTIM_ISR_UE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPTIM_LL_EF_IT_Management Interrupt Management + * @{ + */ +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_LPTIM_EnableIT_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CC1(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_LPTIM_DisableIT_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CC1(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_LPTIM_IsEnabledIT_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CC1(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC1IE) == LPTIM_DIER_CC1IE) ? 1UL : 0UL)); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_LPTIM_EnableIT_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CC2(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_LPTIM_DisableIT_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CC2(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_LPTIM_IsEnabledIT_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CC2(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC2IE) == LPTIM_DIER_CC2IE) ? 1UL : 0UL)); +} + +/** + * @brief Enable capture/compare 1 over-capture interrupt (CC1OIE). + * @rmtoll DIER CC1OIE LL_LPTIM_EnableIT_CC1O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CC1O(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC1OIE); +} + +/** + * @brief Disable capture/compare 1 over-capture interrupt (CC1OIE). + * @rmtoll DIER CC1OIE LL_LPTIM_DisableIT_CC1O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CC1O(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC1OIE); +} + +/** + * @brief Indicates whether the capture/compare 1 over-capture interrupt (CC1OIE) is enabled. + * @rmtoll DIER CC1OIE LL_LPTIM_IsEnabledIT_CC1O + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CC1O(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC1OIE) == LPTIM_DIER_CC1OIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable capture/compare 1 over-capture interrupt (CC2OIE). + * @rmtoll DIER CC2OIE LL_LPTIM_EnableIT_CC2O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CC2O(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC2OIE); +} + +/** + * @brief Disable capture/compare 1 over-capture interrupt (CC2OIE). + * @rmtoll DIER CC2OIE LL_LPTIM_DisableIT_CC2O + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CC2O(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC2OIE); +} + +/** + * @brief Indicates whether the capture/compare 2 over-capture interrupt (CC2OIE) is enabled. + * @rmtoll DIER CC2OIE LL_LPTIM_IsEnabledIT_CC2O + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CC2O(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC2OIE) == LPTIM_DIER_CC2OIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable autoreload match interrupt (ARRMIE). + * @rmtoll DIER ARRMIE LL_LPTIM_EnableIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_ARRM(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_ARRMIE); +} + +/** + * @brief Disable autoreload match interrupt (ARRMIE). + * @rmtoll DIER ARRMIE LL_LPTIM_DisableIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_ARRMIE); +} + +/** + * @brief Indicates whether the autoreload match interrupt (ARRMIE) is enabled. + * @rmtoll DIER ARRMIE LL_LPTIM_IsEnabledIT_ARRM + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_ARRMIE) == LPTIM_DIER_ARRMIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable external trigger valid edge interrupt (EXTTRIGIE). + * @rmtoll DIER EXTTRIGIE LL_LPTIM_EnableIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_EXTTRIGIE); +} + +/** + * @brief Disable external trigger valid edge interrupt (EXTTRIGIE). + * @rmtoll DIER EXTTRIGIE LL_LPTIM_DisableIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_EXTTRIGIE); +} + +/** + * @brief Indicates external trigger valid edge interrupt (EXTTRIGIE) is enabled. + * @rmtoll DIER EXTTRIGIE LL_LPTIM_IsEnabledIT_EXTTRIG + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_EXTTRIGIE) == LPTIM_DIER_EXTTRIGIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable compare register write completed interrupt (CMP1OKIE). + * @rmtoll IER CMP1OKIE LL_LPTIM_EnableIT_CMP1OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CMP1OK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CMP1OKIE); +} + +/** + * @brief Disable compare register write completed interrupt (CMP1OKIE). + * @rmtoll IER CMPO1KIE LL_LPTIM_DisableIT_CMP1OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CMP1OK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CMP1OKIE); +} + +/** + * @brief Indicates whether the compare register write completed interrupt (CMP1OKIE) is enabled. + * @rmtoll IER CMP1OKIE LL_LPTIM_IsEnabledIT_CMP1OK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMP1OK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CMP1OKIE) == LPTIM_DIER_CMP1OKIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable compare register write completed interrupt (CMP2OKIE). + * @rmtoll IER CMP2OKIE LL_LPTIM_EnableIT_CMP2OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_CMP2OK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CMP2OKIE); +} + +/** + * @brief Disable compare register write completed interrupt (CMP2OKIE). + * @rmtoll IER CMP2OKIE LL_LPTIM_DisableIT_CMP2OK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_CMP2OK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CMP2OKIE); +} + +/** + * @brief Indicates whether the compare register write completed interrupt (CMP2OKIE) is enabled. + * @rmtoll IER CMP2OKIE LL_LPTIM_IsEnabledIT_CMP2OK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMP2OK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CMP2OKIE) == LPTIM_DIER_CMP2OKIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable autoreload register write completed interrupt (ARROKIE). + * @rmtoll DIER ARROKIE LL_LPTIM_EnableIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_ARROK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_ARROKIE); +} + +/** + * @brief Disable autoreload register write completed interrupt (ARROKIE). + * @rmtoll DIER ARROKIE LL_LPTIM_DisableIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_ARROKIE); +} + +/** + * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled. + * @rmtoll DIER ARROKIE LL_LPTIM_IsEnabledIT_ARROK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_ARROKIE) == LPTIM_DIER_ARROKIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable direction change to up interrupt (UPIE). + * @rmtoll DIER UPIE LL_LPTIM_EnableIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_UP(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_UPIE); +} + +/** + * @brief Disable direction change to up interrupt (UPIE). + * @rmtoll DIER UPIE LL_LPTIM_DisableIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_UPIE); +} + +/** + * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled. + * @rmtoll DIER UPIE LL_LPTIM_IsEnabledIT_UP + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(const LPTIM_TypeDef *LPTIMx) +{ + return (((READ_BIT(LPTIMx->DIER, LPTIM_DIER_UPIE) == LPTIM_DIER_UPIE) ? 1UL : 0UL)); +} + +/** + * @brief Enable direction change to down interrupt (DOWNIE). + * @rmtoll DIER DOWNIE LL_LPTIM_EnableIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_DOWN(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_DOWNIE); +} + +/** + * @brief Disable direction change to down interrupt (DOWNIE). + * @rmtoll DIER DOWNIE LL_LPTIM_DisableIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_DOWNIE); +} + +/** + * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled. + * @rmtoll DIER DOWNIE LL_LPTIM_IsEnabledIT_DOWN + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_DOWNIE) == LPTIM_DIER_DOWNIE) ? 1UL : 0UL); +} + +/** + * @brief Enable repetition register update successfully completed interrupt (REPOKIE). + * @rmtoll DIER REPOKIE LL_LPTIM_EnableIT_REPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_REPOK(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_REPOKIE); +} + +/** + * @brief Disable repetition register update successfully completed interrupt (REPOKIE). + * @rmtoll DIER REPOKIE LL_LPTIM_DisableIT_REPOK + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_REPOK(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_REPOKIE); +} + +/** + * @brief Indicates whether the repetition register update successfully completed interrupt (REPOKIE) is enabled. + * @rmtoll DIER REPOKIE LL_LPTIM_IsEnabledIT_REPOK + * @param LPTIMx Low-Power Timer instance + * @retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_REPOK(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_REPOKIE) == (LPTIM_DIER_REPOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event interrupt (UEIE). + * @rmtoll DIER UEIE LL_LPTIM_EnableIT_UE + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableIT_UE(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_UEIE); +} + +/** + * @brief Disable update event interrupt (UEIE). + * @rmtoll DIER UEIE LL_LPTIM_DisableIT_UE + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableIT_UE(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_UEIE); +} + +/** + * @brief Indicates whether the update event interrupt (UEIE) is enabled. + * @rmtoll DIER UEIE LL_LPTIM_IsEnabledIT_UE + * @param LPTIMx Low-Power Timer instance + *@ retval State of bit(1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UE(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_UEIE) == (LPTIM_DIER_UEIE)) ? 1UL : 0UL); +} +/** + * @} + */ + + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request. + * @rmtoll DIER UEDE LL_LPTIM_EnableDMAReq_UPDATE + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableDMAReq_UPDATE(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_UEDE); +} + +/** + * @brief Disable update DMA request. + * @rmtoll DIER UEDE LL_LPTIM_DisableDMAReq_UPDATE + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableDMAReq_UPDATE(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_UEDE); +} + +/** + * @brief Indicates whether the update DMA request is enabled. + * @rmtoll DIER UEDE LL_LPTIM_IsEnabledDMAReq_UPDATE + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledDMAReq_UPDATE(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_UEDE) == (LPTIM_DIER_UEDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_LPTIM_EnableDMAReq_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableDMAReq_CC1(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_LPTIM_DisableDMAReq_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableDMAReq_CC1(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_LPTIM_IsEnabledDMAReq_CC1 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledDMAReq_CC1(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC1DE) == (LPTIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_LPTIM_EnableDMAReq_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_EnableDMAReq_CC2(LPTIM_TypeDef *LPTIMx) +{ + SET_BIT(LPTIMx->DIER, LPTIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_LPTIM_DisableDMAReq_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval None + */ +__STATIC_INLINE void LL_LPTIM_DisableDMAReq_CC2(LPTIM_TypeDef *LPTIMx) +{ + CLEAR_BIT(LPTIMx->DIER, LPTIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_LPTIM_IsEnabledDMAReq_CC2 + * @param LPTIMx Low-Power Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledDMAReq_CC2(const LPTIM_TypeDef *LPTIMx) +{ + return ((READ_BIT(LPTIMx->DIER, LPTIM_DIER_CC2DE) == (LPTIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPTIM1 || LPTIM2 || LPTIM3 || LPTIM4 || LPTIM5 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_LPTIM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lpuart.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lpuart.h new file mode 100644 index 000000000..cbeb83aa5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_lpuart.h @@ -0,0 +1,2658 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_LPUART_H +#define STM32H7RSxx_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256 +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty + interrupt enable */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO + not full interrupt enable */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received + in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received + in negative/inverse logic. (1=L, 0=H). + The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, + following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, + following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested + when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted + when the nCTS input is asserted (tied to 0)*/ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +{ + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, + uint32_t PrescalerValue) +{ + uint32_t lpuartdiv; + uint32_t brrresult; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(const USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(const USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(const USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data FIFO flush + * @note TXFRQ bit is set to flush the whole FIFO when FIFO mode is enabled. This + * also sets the flag TXFE (TXFIFO empty bit in the LPUART_ISR register). + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_LPUART_RequestTxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestTxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_LPUART_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pka.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pka.h new file mode 100644 index 000000000..edbe63c27 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pka.h @@ -0,0 +1,601 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_pka.h + * @author MCD Application Team + * @brief Header file of PKA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_PKA_H +#define STM32H7RSxx_LL_PKA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(PKA) + +/** @defgroup PKA_LL PKA + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PKA_LL_ES_INIT PKA Exported Init structure + * @{ + */ + +/** + * @brief PKA Init structures definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the PKA operation mode. + This parameter can be a value of @ref PKA_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_PKA_SetMode(). */ +} LL_PKA_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PKA_LL_Exported_Constants PKA Exported Constants + * @{ + */ + +/** @defgroup PKA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PKA_ReadReg function + * @{ + */ +#define LL_PKA_SR_ADDRERRF PKA_SR_ADDRERRF +#define LL_PKA_SR_RAMERRF PKA_SR_RAMERRF +#define LL_PKA_SR_PROCENDF PKA_SR_PROCENDF +#define LL_PKA_SR_BUSY PKA_SR_BUSY +#define LL_PKA_SR_INITOK PKA_SR_INITOK +#define LL_PKA_SR_OPERRF PKA_SR_OPERRF +/** + * @} + */ + +/** @defgroup PKA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_PKA_ReadReg and LL_PKA_WriteReg functions + * @{ + */ +#define LL_PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE +#define LL_PKA_CR_RAMERRIE PKA_CR_RAMERRIE +#define LL_PKA_CR_PROCENDIE PKA_CR_PROCENDIE +#define LL_PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC +#define LL_PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC +#define LL_PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC +#define LL_PKA_CR_OPERRIE PKA_CR_OPERRIE +#define LL_PKA_CLRFR_OPERRFC PKA_CLRFR_OPERRFC +/** + * @} + */ + +/** @defgroup PKA_LL_EC_MODE Operation Mode + * @brief List of operation mode. + * @{ + */ +#define LL_PKA_MODE_MODULAR_EXP ((uint32_t)0x00000000U) /*!< modular exponentiation */ +#define LL_PKA_MODE_MONTGOMERY_PARAM ((uint32_t)0x00000001U) /*!< Compute Montgomery parameter only */ +#define LL_PKA_MODE_MODULAR_EXP_FAST ((uint32_t)0x00000002U) /*!< modular exponentiation fast mode */ +#define LL_PKA_MODE_MODULAR_EXP_PROTECT ((uint32_t)0x00000003U) /*!< modular exponentiation protect mode */ +#define LL_PKA_MODE_ECC_MUL ((uint32_t)0x00000020U) /*!< compute ECC kP operation */ +#define LL_PKA_MODE_ECC_COMPLETE_ADD ((uint32_t)0x00000023U) /*!< ECC complete addition */ +#define LL_PKA_MODE_ECDSA_SIGNATURE ((uint32_t)0x00000024U) /*!< ECDSA signature */ +#define LL_PKA_MODE_ECDSA_VERIFICATION ((uint32_t)0x00000026U) /*!< ECDSA verification */ +#define LL_PKA_MODE_POINT_CHECK ((uint32_t)0x00000028U) /*!< Point check */ +#define LL_PKA_MODE_RSA_CRT_EXP ((uint32_t)0x00000007U) /*!< RSA CRT exponentiation */ +#define LL_PKA_MODE_MODULAR_INV ((uint32_t)0x00000008U) /*!< Modular inversion */ +#define LL_PKA_MODE_ARITHMETIC_ADD ((uint32_t)0x00000009U) /*!< Arithmetic addition */ +#define LL_PKA_MODE_ARITHMETIC_SUB ((uint32_t)0x0000000AU) /*!< Arithmetic subtraction */ +#define LL_PKA_MODE_ARITHMETIC_MUL ((uint32_t)0x0000000BU) /*!< Arithmetic multiplication */ +#define LL_PKA_MODE_COMPARISON ((uint32_t)0x0000000CU) /*!< Comparison */ +#define LL_PKA_MODE_MODULAR_REDUC ((uint32_t)0x0000000DU) /*!< Modular reduction */ +#define LL_PKA_MODE_MODULAR_ADD ((uint32_t)0x0000000EU) /*!< Modular addition */ +#define LL_PKA_MODE_MODULAR_SUB ((uint32_t)0x0000000FU) /*!< Modular subtraction */ +#define LL_PKA_MODE_MONTGOMERY_MUL ((uint32_t)0x00000010U) /*!< Montgomery multiplication */ +#define LL_PKA_MODE_DOUBLE_BASE_LADDER ((uint32_t)0x00000027U) /*!< Double base ladder */ +#define LL_PKA_MODE_ECC_PROJECTIVE_AFF ((uint32_t)0x0000002FU) /*!< ECC projective to affine */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PKA_LL_Exported_Macros PKA Exported Macros + * @{ + */ + +/** @defgroup PKA_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PKA register + * @param __INSTANCE__ PKA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PKA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PKA register + * @param __INSTANCE__ PKA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PKA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PKA_LL_Exported_Functions PKA Exported Functions + * @{ + */ + +/** @defgroup PKA_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Configure PKA peripheral. + * @brief Set PKA operating mode. + * @rmtoll CR MODE LL_PKA_Config + * @param PKAx PKA Instance. + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_PKA_MODE_MONTGOMERY_PARAM + * @arg @ref LL_PKA_MODE_MODULAR_EXP + * @arg @ref LL_PKA_MODE_ECDSA_SIGNATURE + * @arg @ref LL_PKA_MODE_ECDSA_VERIFICATION + * @arg @ref LL_PKA_MODE_POINT_CHECK + * @arg @ref LL_PKA_MODE_RSA_CRT_EXP + * @arg @ref LL_PKA_MODE_MODULAR_INV + * @arg @ref LL_PKA_MODE_ARITHMETIC_ADD + * @arg @ref LL_PKA_MODE_ARITHMETIC_SUB + * @arg @ref LL_PKA_MODE_ARITHMETIC_MUL + * @arg @ref LL_PKA_MODE_COMPARISON + * @arg @ref LL_PKA_MODE_MODULAR_REDUC + * @arg @ref LL_PKA_MODE_MODULAR_ADD + * @arg @ref LL_PKA_MODE_MODULAR_SUB + * @arg @ref LL_PKA_MODE_MONTGOMERY_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_PROTECT + * @arg @ref LL_PKA_MODE_DOUBLE_BASE_LADDER + * @arg @ref LL_PKA_MODE_ECC_PROJECTIVE_AFF + * @arg @ref LL_PKA_MODE_ECC_COMPLETE_ADD + * @arg @ref LL_PKA_MODE_ECC_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_FAST + */ +__STATIC_INLINE void LL_PKA_Config(PKA_TypeDef *PKAx, uint32_t Mode) +{ + MODIFY_REG(PKAx->CR, (PKA_CR_MODE), (Mode << PKA_CR_MODE_Pos)); +} + +/** + * @brief Enable PKA peripheral. + * @rmtoll CR EN LL_PKA_Enable + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_Enable(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_EN); +} + +/** + * @brief Disable PKA peripheral. + * @rmtoll CR EN LL_PKA_Disable + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_Disable(PKA_TypeDef *PKAx) +{ + CLEAR_BIT(PKAx->CR, PKA_CR_EN); +} + +/** + * @brief Check if the PKA peripheral is enabled or disabled. + * @rmtoll CR EN LL_PKA_IsEnabled + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsEnabled(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->CR, PKA_CR_EN) == (PKA_CR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Set PKA operating mode. + * @rmtoll CR MODE LL_PKA_SetMode + * @param PKAx PKA Instance. + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_PKA_MODE_MONTGOMERY_PARAM + * @arg @ref LL_PKA_MODE_MODULAR_EXP + * @arg @ref LL_PKA_MODE_ECDSA_SIGNATURE + * @arg @ref LL_PKA_MODE_ECDSA_VERIFICATION + * @arg @ref LL_PKA_MODE_POINT_CHECK + * @arg @ref LL_PKA_MODE_RSA_CRT_EXP + * @arg @ref LL_PKA_MODE_MODULAR_INV + * @arg @ref LL_PKA_MODE_ARITHMETIC_ADD + * @arg @ref LL_PKA_MODE_ARITHMETIC_SUB + * @arg @ref LL_PKA_MODE_ARITHMETIC_MUL + * @arg @ref LL_PKA_MODE_COMPARISON + * @arg @ref LL_PKA_MODE_MODULAR_REDUC + * @arg @ref LL_PKA_MODE_MODULAR_ADD + * @arg @ref LL_PKA_MODE_MODULAR_SUB + * @arg @ref LL_PKA_MODE_MONTGOMERY_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_PROTECT + * @arg @ref LL_PKA_MODE_DOUBLE_BASE_LADDER + * @arg @ref LL_PKA_MODE_ECC_PROJECTIVE_AFF + * @arg @ref LL_PKA_MODE_ECC_COMPLETE_ADD + * @arg @ref LL_PKA_MODE_ECC_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_FAST + * @retval None + */ +__STATIC_INLINE void LL_PKA_SetMode(PKA_TypeDef *PKAx, uint32_t Mode) +{ + MODIFY_REG(PKAx->CR, PKA_CR_MODE, Mode << PKA_CR_MODE_Pos); +} + +/** + * @brief Get PKA operating mode. + * @rmtoll CR MODE LL_PKA_GetMode + * @param PKAx PKA Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_PKA_MODE_MONTGOMERY_PARAM + * @arg @ref LL_PKA_MODE_MODULAR_EXP + * @arg @ref LL_PKA_MODE_ECDSA_SIGNATURE + * @arg @ref LL_PKA_MODE_ECDSA_VERIFICATION + * @arg @ref LL_PKA_MODE_POINT_CHECK + * @arg @ref LL_PKA_MODE_RSA_CRT_EXP + * @arg @ref LL_PKA_MODE_MODULAR_INV + * @arg @ref LL_PKA_MODE_ARITHMETIC_ADD + * @arg @ref LL_PKA_MODE_ARITHMETIC_SUB + * @arg @ref LL_PKA_MODE_ARITHMETIC_MUL + * @arg @ref LL_PKA_MODE_COMPARISON + * @arg @ref LL_PKA_MODE_MODULAR_REDUC + * @arg @ref LL_PKA_MODE_MODULAR_ADD + * @arg @ref LL_PKA_MODE_MODULAR_SUB + * @arg @ref LL_PKA_MODE_MONTGOMERY_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_PROTECT + * @arg @ref LL_PKA_MODE_DOUBLE_BASE_LADDER + * @arg @ref LL_PKA_MODE_ECC_PROJECTIVE_AFF + * @arg @ref LL_PKA_MODE_ECC_COMPLETE_ADD + * @arg @ref LL_PKA_MODE_ECC_MUL + * @arg @ref LL_PKA_MODE_MODULAR_EXP_FAST + */ +__STATIC_INLINE uint32_t LL_PKA_GetMode(const PKA_TypeDef *PKAx) +{ + return (uint32_t)(READ_BIT(PKAx->CR, PKA_CR_MODE) >> PKA_CR_MODE_Pos); +} + +/** + * @brief Start the operation selected using LL_PKA_SetMode. + * @rmtoll CR START LL_PKA_Start + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_Start(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_START); +} + +/** + * @} + */ + +/** @defgroup PKA_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable address error interrupt. + * @rmtoll CR ADDRERRIE LL_PKA_EnableIT_ADDRERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_EnableIT_ADDRERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_ADDRERRIE); +} + +/** + * @brief Enable RAM error interrupt. + * @rmtoll CR RAMERRIE LL_PKA_EnableIT_RAMERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_EnableIT_RAMERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_RAMERRIE); +} + +/** + * @brief Enable OPERATION error interrupt. + * @rmtoll CR OPERRIE LL_PKA_EnableIT_OPERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_EnableIT_OPERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_OPERRIE); +} + +/** + * @brief Enable end of operation interrupt. + * @rmtoll CR PROCENDIE LL_PKA_EnableIT_PROCEND + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_EnableIT_PROCEND(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CR, PKA_CR_PROCENDIE); +} + +/** + * @brief Disable address error interrupt. + * @rmtoll CR ADDRERRIE LL_PKA_DisableIT_ADDERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_DisableIT_ADDERR(PKA_TypeDef *PKAx) +{ + CLEAR_BIT(PKAx->CR, PKA_CR_ADDRERRIE); +} + +/** + * @brief Disable RAM error interrupt. + * @rmtoll CR RAMERRIE LL_PKA_DisableIT_RAMERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_DisableIT_RAMERR(PKA_TypeDef *PKAx) +{ + CLEAR_BIT(PKAx->CR, PKA_CR_RAMERRIE); +} + +/** + * @brief Disable End of operation interrupt. + * @rmtoll CR PROCENDIE LL_PKA_DisableIT_PROCEND + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_DisableIT_PROCEND(PKA_TypeDef *PKAx) +{ + CLEAR_BIT(PKAx->CR, PKA_CR_PROCENDIE); +} + +/** + * @brief Disable OPERATION error interrupt. + * @rmtoll CR OPERRIE LL_PKA_EnableIT_OPERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_DisableIT_OPERR(PKA_TypeDef *PKAx) +{ + CLEAR_BIT(PKAx->CR, PKA_CR_OPERRIE); +} + +/** + * @brief Check if address error interrupt is enabled. + * @rmtoll CR ADDRERRIE LL_PKA_IsEnabledIT_ADDRERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsEnabledIT_ADDRERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->CR, PKA_CR_ADDRERRIE) == (PKA_CR_ADDRERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if RAM error interrupt is enabled. + * @rmtoll CR RAMERRIE LL_PKA_IsEnabledIT_RAMERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsEnabledIT_RAMERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->CR, PKA_CR_RAMERRIE) == (PKA_CR_RAMERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if OPERATION error interrupt is enabled. + * @rmtoll CR OPERRIE LL_PKA_IsEnabledIT_OPERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsEnabledIT_OPERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->CR, PKA_CR_OPERRIE) == (PKA_CR_OPERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if end of operation interrupt is enabled. + * @rmtoll CR PROCENDIE LL_PKA_IsEnabledIT_PROCEND + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsEnabledIT_PROCEND(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->CR, PKA_CR_PROCENDIE) == (PKA_CR_PROCENDIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup PKA_LL_EF_FLAG_Management PKA flag management + * @{ + */ + +/** + * @brief Get PKA address error flag. + * @rmtoll SR ADDRERRF LL_PKA_IsActiveFlag_ADDRERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_ADDRERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->SR, PKA_SR_ADDRERRF) == (PKA_SR_ADDRERRF)) ? 1UL : 0UL); +} + +/** + * @brief Get PKA RAM error flag. + * @rmtoll SR RAMERRF LL_PKA_IsActiveFlag_RAMERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_RAMERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->SR, PKA_SR_RAMERRF) == (PKA_SR_RAMERRF)) ? 1UL : 0UL); +} + +/** + * @brief Get PKA OPERATION error flag. + * @rmtoll SR OPERRF LL_PKA_IsActiveFlag_OPERR + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_OPERR(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->SR, PKA_SR_OPERRF) == (PKA_SR_OPERRF)) ? 1UL : 0UL); +} + +/** + * @brief Get PKA end of operation flag. + * @rmtoll SR PROCENDF LL_PKA_IsActiveFlag_PROCEND + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_PROCEND(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->SR, PKA_SR_PROCENDF) == (PKA_SR_PROCENDF)) ? 1UL : 0UL); +} + +/** + * @brief Get PKA busy flag. + * @rmtoll SR BUSY LL_PKA_IsActiveFlag_BUSY + * @param PKAx PKA Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_BUSY(const PKA_TypeDef *PKAx) +{ + return ((READ_BIT(PKAx->SR, PKA_SR_BUSY) == (PKA_SR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear PKA address error flag. + * @rmtoll CLRFR ADDRERRFC LL_PKA_ClearFlag_ADDERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_ClearFlag_ADDERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CLRFR, PKA_CLRFR_ADDRERRFC); +} + +/** + * @brief Clear PKA RAM error flag. + * @rmtoll CLRFR RAMERRFC LL_PKA_ClearFlag_RAMERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_ClearFlag_RAMERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CLRFR, PKA_CLRFR_RAMERRFC); +} + +/** + * @brief Clear PKA OPERATION error flag. + * @rmtoll CLRFR OPERRFC LL_PKA_ClearFlag_OPERR + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_ClearFlag_OPERR(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CLRFR, PKA_CLRFR_OPERRFC); +} + +/** + * @brief Clear PKA end of operation flag. + * @rmtoll CLRFR PROCENDFC LL_PKA_ClearFlag_PROCEND + * @param PKAx PKA Instance. + * @retval None + */ +__STATIC_INLINE void LL_PKA_ClearFlag_PROCEND(PKA_TypeDef *PKAx) +{ + SET_BIT(PKAx->CLRFR, PKA_CLRFR_PROCENDFC); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup PKA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_PKA_DeInit(const PKA_TypeDef *PKAx); +ErrorStatus LL_PKA_Init(PKA_TypeDef *PKAx, LL_PKA_InitTypeDef *PKA_InitStruct); +void LL_PKA_StructInit(LL_PKA_InitTypeDef *PKA_InitStruct); + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PKA) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_PKA_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pwr.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pwr.h new file mode 100644 index 000000000..2cc3baca8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_pwr.h @@ -0,0 +1,1887 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_PWR_H +#define STM32H7RSxx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_LL_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_LL_WAKEUP_PIN_OFFSET Wake-Up Pins register offsets Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +/* Wake-Up Pins PWR register offsets */ +#define LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2UL) +#define LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK (0x1FU) +/** + * @} + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_SR_CSSF PWR_CSR3_CSSF /*!< Clear Stop and Standby flags */ +#define LL_PWR_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1 /*!< Clear Wakeup flag 1 */ +#define LL_PWR_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2 /*!< Clear Wakeup flag 2 */ +#define LL_PWR_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3 /*!< Clear Wakeup flag 3 */ +#define LL_PWR_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4 /*!< Clear Wakeup flag 4 */ +#define LL_PWR_WKUPCR_WKUPC PWR_WKUPCR_WKUPC /*!< Clear all Wakeup flags */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_FLAG_VOSRDY PWR_CSR4_VOSRDY /*!< Voltage scaling ready flag */ +#define LL_PWR_FLAG_STOPF PWR_CSR3_STOPF /*!< Stop flag */ +#define LL_PWR_FLAG_SBF PWR_CSR3_SBF /*!< Standby flag */ +#define LL_PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag 1 */ +#define LL_PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag 2 */ +#define LL_PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag 3 */ +#define LL_PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag 4 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR Power Down Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_POWERDOWN_MODE_DS_STOP (0U) /*!< Enter to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_POWERDOWN_MODE_DS_STANDBY PWR_CSR3_PDDS /*!< Enter to Standby mode when the CPU enters deepsleep */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE Run mode Regulator Voltage Scaling + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SCALE0 PWR_CSR4_VOS /*!< Voltage scaling range 0 (highest frequency) */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 (0U) /*!< Voltage scaling range 1 (lowest power) */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_STOP_MODE_REGU_VOLTAGE Stop mode Regulator Voltage Scaling + * @{ + */ +#define LL_PWR_REGU_STOP_VOLTAGE_SCALE3 PWR_CR1_SVOS /*!< Voltage scaling range 3 (highest frequency) when system enters STOP mode */ +#define LL_PWR_REGU_STOP_VOLTAGE_SCALE5 (0U) /*!< Voltage scaling range 5 (lowest power) when system enters STOP mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL Power Digital Voltage Level Detector + * @{ + */ +#define LL_PWR_PVDLEVEL_1 (0U) /*!< PVD level 1 */ +#define LL_PWR_PVDLEVEL_2 PWR_CR1_PLS_0 /*!< PVD level 2 */ +#define LL_PWR_PVDLEVEL_3 PWR_CR1_PLS_1 /*!< PVD level 3 */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR1_PLS_0 | PWR_CR1_PLS_1) /*!< PVD level 4 */ +#define LL_PWR_PVDLEVEL_5 PWR_CR1_PLS_2 /*!< PVD level 5 */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR1_PLS_0 | PWR_CR1_PLS_2) /*!< PVD level 6 */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR1_PLS_1 | PWR_CR1_PLS_2) /*!< PVD level 7 */ +#define LL_PWR_PVDLEVEL_EXT (PWR_CR1_PLS_0 | PWR_CR1_PLS_1 | PWR_CR1_PLS_2) +/*!< External voltage level on PVD_IN pin, compared to internal VREFINT level */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_AVDLEVEL Power Analog Voltage Level Detector + * @{ + */ +#define LL_PWR_AVDLEVEL_1 (0U) /*!< Analog Voltage detector level 1 */ +#define LL_PWR_AVDLEVEL_2 PWR_CR1_ALS_0 /*!< Analog Voltage detector level 2 */ +#define LL_PWR_AVDLEVEL_3 PWR_CR1_ALS_1 /*!< Analog Voltage detector level 3 */ +#define LL_PWR_AVDLEVEL_4 (PWR_CR1_ALS_0 | PWR_CR1_ALS_1) /*!< Analog Voltage detector level 4 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_XSPI_CAP1 XSPI 1 capacitor + * @{ + */ +#define LL_PWR_XSPI1_CAPACITOR_OFF (0U) /*!< XSPI Port 1 Capacitor OFF */ +#define LL_PWR_XSPI1_CAPACITOR_1_DIV_3 PWR_CSR2_XSPICAP1_0 /*!< XSPI Port 1 Capacitor set to 1/3 */ +#define LL_PWR_XSPI1_CAPACITOR_2_DIV_3 PWR_CSR2_XSPICAP1_1 /*!< XSPI Port 1 Capacitor set to 2/3 */ +#define LL_PWR_XSPI1_CAPACITOR_FULL (PWR_CSR2_XSPICAP1_0 | PWR_CSR2_XSPICAP1_1) +/*!< XSPI Port 1 Capacitor set to full capacitance */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_XSPI_CAP2 XSPI 2 Capacitor + * @{ + */ +#define LL_PWR_XSPI2_CAPACITOR_OFF (0U) /*!< XSPI Port 2 Capacitor OFF */ +#define LL_PWR_XSPI2_CAPACITOR_1_DIV_3 PWR_CSR2_XSPICAP2_0 /*!< XSPI Port 2 Capacitor set to 1/3 */ +#define LL_PWR_XSPI2_CAPACITOR_2_DIV_3 PWR_CSR2_XSPICAP2_1 /*!< XSPI Port 2 Capacitor set to 2/3 */ +#define LL_PWR_XSPI2_CAPACITOR_FULL (PWR_CSR2_XSPICAP2_0 | PWR_CSR2_XSPICAP2_1) +/*!< XSPI Port 2 Capacitor set to full capacitance */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR Battery Charge Resistor + * @{ + */ +#define LL_PWR_BATT_CHARG_RESISTOR_5K (0U) /*!< Charge the Battery through a 5 kO resistor */ +#define LL_PWR_BATT_CHARG_RESISTOR_1_5K PWR_CSR2_VBRS /*!< Charge the Battery through a 1.5 kO resistor */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 /*!< Wake-Up pin 1 : PA0 */ +#define LL_PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 /*!< Wake-Up pin 2 : PA2 */ +#define LL_PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 /*!< Wake-Up pin 3 : PC13 */ +#define LL_PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 /*!< Wake-Up pin 4 : PC1 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN_PULL Wakeup Pins pull configuration + * @{ + */ +#define LL_PWR_WAKEUP_PIN_NOPULL (0UL) /*!< Configure Wake-Up pin in no pull */ +#define LL_PWR_WAKEUP_PIN_PULLUP (1UL) /*!< Configure Wake-Up pin in pull Up */ +#define LL_PWR_WAKEUP_PIN_PULLDOWN (2UL) /*!< Configure Wake-Up pin in pull Down */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_SUPPLY_PWR Power supply source configuration + * @{ + */ +#define LL_PWR_LDO_SUPPLY PWR_CSR2_LDOEN /*!< Core domains are supplied from the LDO */ +#define LL_PWR_DIRECT_SMPS_SUPPLY PWR_CSR2_SDEN /*!< Core domains are supplied from the SMPS */ +#define LL_PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ +#define LL_PWR_EXTERNAL_SOURCE_SUPPLY PWR_CSR2_BYPASS /*!< The SMPS and the LDO are Bypassed. The Core domains are supplied from an external source */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO_PIN_MASK PWR GPIO Pin Mask + * @{ + */ +#define LL_PWR_GPIO_PIN_0 (0x0001U) /*!< GPIO port I/O pin 0 */ +#define LL_PWR_GPIO_PIN_1 (0x0002U) /*!< GPIO port I/O pin 1 */ +#define LL_PWR_GPIO_PIN_2 (0x0004U) /*!< GPIO port I/O pin 2 */ +#define LL_PWR_GPIO_PIN_3 (0x0008U) /*!< GPIO port I/O pin 3 */ +#define LL_PWR_GPIO_PIN_4 (0x0010U) /*!< GPIO port I/O pin 4 */ +#define LL_PWR_GPIO_PIN_5 (0x0020U) /*!< GPIO port I/O pin 5 */ +#define LL_PWR_GPIO_PIN_6 (0x0040U) /*!< GPIO port I/O pin 6 */ +#define LL_PWR_GPIO_PIN_7 (0x0080U) /*!< GPIO port I/O pin 7 */ +#define LL_PWR_GPIO_PIN_8 (0x0100U) /*!< GPIO port I/O pin 8 */ +#define LL_PWR_GPIO_PIN_9 (0x0200U) /*!< GPIO port I/O pin 9 */ +#define LL_PWR_GPIO_PIN_10 (0x0400U) /*!< GPIO port I/O pin 10 */ +#define LL_PWR_GPIO_PIN_11 (0x0800U) /*!< GPIO port I/O pin 11 */ +#define LL_PWR_GPIO_PIN_12 (0x1000U) /*!< GPIO port I/O pin 12 */ +#define LL_PWR_GPIO_PIN_13 (0x2000U) /*!< GPIO port I/O pin 13 */ +#define LL_PWR_GPIO_PIN_14 (0x4000U) /*!< GPIO port I/O pin 14 */ +#define LL_PWR_GPIO_PIN_15 (0x8000U) /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration PWR Configuration + * @{ + */ + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR1 PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR1 PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR1 PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_PVDE) == (PWR_CR1_PVDE)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR1 PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @arg @ref LL_PWR_PVDLEVEL_EXT + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR1 PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @arg @ref LL_PWR_PVDLEVEL_EXT + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return READ_BIT(PWR->CR1, PWR_CR1_PLS); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Flash low-power mode in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_EnableFlashLowPower + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashLowPower(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash low-power mode in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_DisableFlashLowPower + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashLowPower(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Check if the Flash low-power mode in Stop Mode is enabled + * @rmtoll CR1 FLPS LL_PWR_IsEnabledFlashLowPower + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashLowPower(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FLPS) == (PWR_CR1_FLPS)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Analog Voltage Booster + * @rmtoll CR1 BOOSTE LL_PWR_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogBooster(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the Analog Voltage Booster + * @rmtoll CR1 BOOSTE LL_PWR_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogBooster(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Check if the Analog Voltage Booster is enabled + * @rmtoll CR1 BOOSTE LL_PWR_IsEnabledAnalogBooster + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogBooster(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_BOOSTE) == (PWR_CR1_BOOSTE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Analog Voltage Ready + * @rmtoll CR1 AVDREADY LL_PWR_EnableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogVoltageReady(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVDREADY); +} + +/** + * @brief Disable the Analog Voltage Ready + * @rmtoll CR1 AVDREADY LL_PWR_DisableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogVoltageReady(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDREADY); +} + +/** + * @brief Check if the Analog Voltage Ready is enabled + * @rmtoll CR1 AVDREADY LL_PWR_IsEnabledAnalogVoltageReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogVoltageReady(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVDREADY) == (PWR_CR1_AVDREADY)) ? 1UL : 0UL); +} + +/** + * @brief Enable Analog Power Voltage Monitor + * @rmtoll CR1 AVDEN LL_PWR_EnableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable Analog Power Voltage Monitor + * @rmtoll CR1 AVDEN LL_PWR_DisableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Check if Analog Power Voltage Monitor is enabled + * @rmtoll CR1 AVDEN LL_PWR_IsEnabledAVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVDEN) == (PWR_CR1_AVDEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the Analog Voltage detector level + * @rmtoll CR1 ALS LL_PWR_SetAVDLevel + * @param AVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + * @arg @ref LL_PWR_AVDLEVEL_4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetAVDLevel(uint32_t AVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_ALS, AVDLevel); +} + +/** + * @brief Get the Analog Voltage detector level selected + * @rmtoll CR1 ALS LL_PWR_GetAVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + * @arg @ref LL_PWR_AVDLEVEL_4 + */ +__STATIC_INLINE uint32_t LL_PWR_GetAVDLevel(void) +{ + return READ_BIT(PWR->CR1, PWR_CR1_ALS); +} + +/** + * @brief Enable Backup Regulator + * @rmtoll CSR1 BREN LL_PWR_EnableBkUpRegulator + * @note When set, the Backup Regulator (used to maintain backup SRAM content in Standby and + * VBAT modes) is enabled. If BRE is reset, the backup Regulator is switched off. The backup + * SRAM can still be used but its content will be lost in the Standby and VBAT modes. Once set, + * the application must wait that the Backup Regulator Ready flag (BRR) is set to indicate that + * the data written into the RAM will be maintained in the Standby and VBAT modes. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) +{ + SET_BIT(PWR->CSR1, PWR_CSR1_BREN); +} + +/** + * @brief Disable Backup Regulator + * @rmtoll CSR1 BREN LL_PWR_DisableBkUpRegulator + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) +{ + CLEAR_BIT(PWR->CSR1, PWR_CSR1_BREN); +} + +/** + * @brief Check if the backup Regulator is enabled + * @rmtoll CSR1 BREN LL_PWR_IsEnabledBkUpRegulator + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_BREN) == (PWR_CSR1_BREN)) ? 1UL : 0UL); +} + +/** + * @brief Enable VBAT and Temperature monitoring + * @rmtoll CSR1 MONEN LL_PWR_EnableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableMonitoring(void) +{ + SET_BIT(PWR->CSR1, PWR_CSR1_MONEN); +} + +/** + * @brief Disable VBAT and Temperature monitoring + * @rmtoll CSR1 MONEN LL_PWR_DisableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableMonitoring(void) +{ + CLEAR_BIT(PWR->CSR1, PWR_CSR1_MONEN); +} + +/** + * @brief Check if the VBAT and Temperature monitoring is enabled + * @rmtoll CSR1 MONEN LL_PWR_IsEnabledMonitoring + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledMonitoring(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_MONEN) == (PWR_CSR1_MONEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the PWR supply + * @rmtoll CSR2 SDHILEVEL LL_PWR_ConfigSupply + * @rmtoll CSR2 SMPSEXTHP LL_PWR_ConfigSupply + * @rmtoll CSR2 SDEN LL_PWR_ConfigSupply + * @rmtoll CSR2 LDOEN LL_PWR_ConfigSupply + * @rmtoll CSR2 BYPASS LL_PWR_ConfigSupply + * @param SupplySource This parameter can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + * @retval None + */ +__STATIC_INLINE void LL_PWR_ConfigSupply(uint32_t SupplySource) +{ + /* Set the power supply configuration */ + MODIFY_REG(PWR->CSR2, (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_LDOEN | PWR_CSR2_BYPASS), + SupplySource); +} + +/** + * @brief Get the PWR supply + * @rmtoll CSR2 SDHILEVEL LL_PWR_GetSupply + * @rmtoll CSR2 SMPSEXTHP LL_PWR_GetSupply + * @rmtoll CSR2 SDEN LL_PWR_GetSupply + * @rmtoll CSR2 LDOEN LL_PWR_GetSupply + * @rmtoll CSR2 BYPASS LL_PWR_GetSupply + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + */ +__STATIC_INLINE uint32_t LL_PWR_GetSupply(void) +{ + /* Get the power supply configuration */ + return READ_BIT(PWR->CSR2, + (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_LDOEN | PWR_CSR2_BYPASS)); +} + +/** + * @brief Enable VBAT battery charging + * @rmtoll CSR2 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_VBE); +} + +/** + * @brief Disable VBAT battery charging + * @rmtoll CSR2 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_VBE); +} + +/** + * @brief Check if VBAT battery charging is enabled + * @rmtoll CSR2 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_VBE) == (PWR_CSR2_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Battery charge resistor impedance + * @rmtoll CSR2 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CSR2, PWR_CSR2_VBRS, Resistor); +} + +/** + * @brief Get the Battery charge resistor impedance + * @rmtoll CSR2 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (READ_BIT(PWR->CSR2, PWR_CSR2_VBRS)); +} + +/** + * @brief Set the XSPI port 1 capacitor value + * @rmtoll CSR2 XSPICAP1 LL_PWR_SetXSPI1Capacitor + * @param Capacitor This parameter can be one of the following values: + * @arg @ref LL_PWR_XSPI1_CAPACITOR_OFF + * @arg @ref LL_PWR_XSPI1_CAPACITOR_1_DIV_3 + * @arg @ref LL_PWR_XSPI1_CAPACITOR_2_DIV_3 + * @arg @ref LL_PWR_XSPI1_CAPACITOR_FULL + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetXSPI1Capacitor(uint32_t Capacitor) +{ + MODIFY_REG(PWR->CSR2, PWR_CSR2_XSPICAP1, Capacitor); +} + +/** + * @brief Get the XSPI port 1 capacitor value + * @rmtoll CSR2 XSPICAP1 LL_PWR_GetXSPI1Capacitor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_XSPI1_CAPACITOR_OFF + * @arg @ref LL_PWR_XSPI1_CAPACITOR_1_DIV_3 + * @arg @ref LL_PWR_XSPI1_CAPACITOR_2_DIV_3 + * @arg @ref LL_PWR_XSPI1_CAPACITOR_FULL + */ +__STATIC_INLINE uint32_t LL_PWR_GetXSPI1Capacitor(void) +{ + return (READ_BIT(PWR->CSR2, PWR_CSR2_XSPICAP1)); +} + +/** + * @brief Set the XSPI port 2 capacitor value + * @rmtoll CSR2 XSPICAP2 LL_PWR_SetXSPI2Capacitor + * @param Capacitor This parameter can be one of the following values: + * @arg @ref LL_PWR_XSPI2_CAPACITOR_OFF + * @arg @ref LL_PWR_XSPI2_CAPACITOR_1_DIV_3 + * @arg @ref LL_PWR_XSPI2_CAPACITOR_2_DIV_3 + * @arg @ref LL_PWR_XSPI2_CAPACITOR_FULL + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetXSPI2Capacitor(uint32_t Capacitor) +{ + MODIFY_REG(PWR->CSR2, PWR_CSR2_XSPICAP2, Capacitor); +} + +/** + * @brief Get the XSPI port 2 capacitor value + * @rmtoll CSR2 XSPICAP2 LL_PWR_GetXSPI2Capacitor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_XSPI2_CAPACITOR_OFF + * @arg @ref LL_PWR_XSPI2_CAPACITOR_1_DIV_3 + * @arg @ref LL_PWR_XSPI2_CAPACITOR_2_DIV_3 + * @arg @ref LL_PWR_XSPI2_CAPACITOR_FULL + */ +__STATIC_INLINE uint32_t LL_PWR_GetXSPI2Capacitor(void) +{ + return (uint32_t)(READ_BIT(PWR->CSR2, PWR_CSR2_XSPICAP2)); +} + +/** + * @brief Enable the USB voltage detector + * @rmtoll CSR2 USB33DEN LL_PWR_EnableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBVoltageDetector(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_USB33DEN); +} + +/** + * @brief Disable the USB voltage detector + * @rmtoll CSR2 USB33DEN LL_PWR_DisableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBVoltageDetector(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USB33DEN); +} + +/** + * @brief Check if the USB voltage detector is enabled + * @rmtoll CSR2 USB33DEN LL_PWR_IsEnabledUSBVoltageDetector + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBVoltageDetector(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_USB33DEN) == (PWR_CSR2_USB33DEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the USB regulator + * @rmtoll CSR2 USBREGEN LL_PWR_EnableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBReg(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_USBREGEN); +} + +/** + * @brief Disable the USB regulator + * @rmtoll CSR2 USBREGEN LL_PWR_DisableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBReg(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USBREGEN); +} + +/** + * @brief Check if the USB regulator is enabled + * @rmtoll CSR2 USBREGEN LL_PWR_IsEnabledUSBReg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBReg(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_USBREGEN) == (PWR_CSR2_USBREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the USB HS PHY regulator + * @rmtoll CSR2 USBHSREGEN LL_PWR_EnableUSBHSPHYReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBHSPHYReg(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_USBHSREGEN); +} + +/** + * @brief Disable USB HS PHY regulator + * @rmtoll CSR2 USBHSREGEN LL_PWR_DisableUSBHSPHYReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBHSPHYReg(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USBHSREGEN); +} + +/** + * @brief Check if the USB HS PHY regulator is enabled + * @rmtoll CSR2 USBHSREGEN LL_PWR_IsEnabledUSBHSPHYReg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBHSPHYReg(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_USBHSREGEN) == (PWR_CSR2_USBHSREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable UCPD configuration memorization in Standby. + * @rmtoll UCPDR UCPD_STBY LL_PWR_EnableUCPDStandbyMode + * @retval None + * @note This function must be called just before entering Standby mode when using UCPD. + */ +__STATIC_INLINE void LL_PWR_EnableUCPDStandbyMode(void) +{ + /* Memorize UCPD configuration when entering standby mode */ + SET_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_STBY); +} + +/** + * @brief Disable UCPD configuration memorization in Standby. + * @rmtoll UCPDR UCPD_STBY LL_PWR_DisableUCPDStandbyMode + * @retval None + * @note This function must be called on exiting the Standby mode and before any UCPD + * configuration update. + */ +__STATIC_INLINE void LL_PWR_DisableUCPDStandbyMode(void) +{ + CLEAR_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_STBY); +} + +/** + * @brief Check if the UCPD configuration memorization in Standby is enabled + * @rmtoll UCPDR UCPD_STBY LL_PWR_IsEnabledUCPDStandbyMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUCPDStandbyMode(void) +{ + return ((READ_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_STBY) == (PWR_UCPDR_UCPD_STBY)) ? 1UL : 0UL); +} + +/** + * @brief Enable the UCPD dead battery behavior + * @rmtoll UCPDR UCPD_DBDIS LL_PWR_EnableUCPDDeadBattery + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUCPDDeadBattery(void) +{ + CLEAR_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_DBDIS); +} + +/** + * @brief Disable the UCPD dead battery behavior + * @rmtoll UCPDR UCPD_DBDIS LL_PWR_DisableUCPDDeadBattery + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUCPDDeadBattery(void) +{ + SET_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_DBDIS); +} + +/** + * @brief Check if the UCPD dead battery behavior is enabled + * @rmtoll UCPDR UCPD_DBDIS LL_PWR_IsEnabledUCPDDeadBattery + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUCPDDeadBattery(void) +{ + return ((READ_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_DBDIS) == (PWR_UCPDR_UCPD_DBDIS)) ? 1UL : 0UL); +} + +/** + * @brief Enable the XSPI_P1 interface + * @rmtoll CSR2 EN_XSPIM1 LL_PWR_EnableXSPIM1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableXSPIM1(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM1); +} + +/** + * @brief Disable the XSPI_P1 interface + * @rmtoll CSR2 EN_XSPIM1 LL_PWR_DisableXSPIM1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableXSPIM1(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM1); +} + +/** + * @brief Check if the XSPI_P1 interface is enabled + * @rmtoll CSR2 EN_XSPIM1 LL_PWR_IsEnabledXSPIM1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledXSPIM1(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM1) == (PWR_CSR2_EN_XSPIM1)) ? 1UL : 0UL); +} + +/** + * @brief Enable the XSPI_P2 interface + * @rmtoll CSR2 EN_XSPIM2 LL_PWR_EnableXSPIM2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableXSPIM2(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM2); +} + +/** + * @brief Disable the XSPI_P2 interface + * @rmtoll CSR2 EN_XSPIM2 LL_PWR_DisableXSPIM2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableXSPIM2(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM2); +} + +/** + * @brief Check if the XSPI_P2 interface is enabled + * @rmtoll CSR2 EN_XSPIM2 LL_PWR_IsEnabledXSPIM2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledXSPIM2(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM2) == (PWR_CSR2_EN_XSPIM2)) ? 1UL : 0UL); +} + +/** + * @brief Set the Power Down mode when device enters deepsleep mode + * @rmtoll CSR3 PDDS LL_PWR_SetPowerDownModeDS + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_POWERDOWN_MODE_DS_STOP + * @arg @ref LL_PWR_POWERDOWN_MODE_DS_STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerDownModeDS(uint32_t PDMode) +{ + MODIFY_REG(PWR->CSR3, PWR_CSR3_PDDS, PDMode); +} + +/** + * @brief Get the Power Down mode when device enters deepsleep mode + * @rmtoll CSR3 PDDS LL_PWR_GetPowerDownModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_POWERDOWN_MODE_DS_STOP + * @arg @ref LL_PWR_POWERDOWN_MODE_DS_STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerDownModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CSR3, PWR_CSR3_PDDS)); +} + +/** + * @brief Set the main internal Regulator output voltage + * @rmtoll CSR4 VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CSR4, PWR_CSR4_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal Regulator output voltage + * @rmtoll CSR4 VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CSR4, PWR_CSR4_VOS)); +} + +/** + * @brief Set the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_SetStopModeRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_STOP_VOLTAGE_SCALE3 + * @arg @ref LL_PWR_REGU_STOP_VOLTAGE_SCALE5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetStopModeRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_SVOS, VoltageScaling); +} + +/** + * @brief Get the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_GetStopModeRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_STOP_VOLTAGE_SCALE3 + * @arg @ref LL_PWR_REGU_STOP_VOLTAGE_SCALE5 + */ +__STATIC_INLINE uint32_t LL_PWR_GetStopModeRegulVoltageScaling(void) +{ + return READ_BIT(PWR->CR1, PWR_CR1_SVOS); +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Check if the Wake-Up pin polarity is low for event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) == (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin Pull None + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullNone + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullNone(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_NOPULL << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Up + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullUp + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullUp(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLUP << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Down + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullDown + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullDown(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLDOWN << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Get the Wake-Up pin pull + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD2 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD3 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD4 LL_PWR_GetWakeUpPinPull\ + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN_NOPULL + * @arg @ref LL_PWR_WAKEUP_PIN_PULLUP + * @arg @ref LL_PWR_WAKEUP_PIN_PULLDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetWakeUpPinPull(uint32_t WakeUpPin) +{ + uint32_t regValue = READ_BIT(PWR->WKUPEPR, (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); + + return (uint32_t)(regValue >> ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)); +} + +/** + * @brief Enable the pull-up on I3C1_SCL (PB6)) in standby mode + * @rmtoll APCR I3CPB6_PU LL_PWR_EnableI3CPB6PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableI3CPB6PU(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_I3CPB6_PU); +} + +/** + * @brief Disable the pull-up on I3C1_SCL (PB6) in standby mode + * @rmtoll APCR I3CPB6_PU LL_PWR_DisableI3CPB6PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableI3CPB6PU(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_I3CPB6_PU); +} + +/** + * @brief Check if the pull-up on I3C1_SCL (PB6) in standby mode is enabled + * @rmtoll APCR I3CPB6_PU LL_PWR_IsEnabledI3CPB6PU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledI3CPB6PU(void) +{ + return ((READ_BIT(PWR->APCR, PWR_APCR_I3CPB6_PU) == (PWR_APCR_I3CPB6_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable the pull-up on I3C1_SDA (PB7) in standby mode + * @rmtoll APCR I3CPB7_PU LL_PWR_EnableI3CPB7PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableI3CPB7PU(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_I3CPB7_PU); +} + +/** + * @brief Disable the pull-up on I3C1_SDA (PB7) in standby mode + * @rmtoll APCR I3CPB7_PU LL_PWR_DisableI3CPB7PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableI3CPB7PU(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_I3CPB7_PU); +} + +/** + * @brief Check if the pull-up on I3C1_SDA (PB7) in standby mode is enabled + * @rmtoll APCR I3CPB7_PU LL_PWR_IsEnabledI3CPB7PU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledI3CPB7PU(void) +{ + return ((READ_BIT(PWR->APCR, PWR_APCR_I3CPB7_PU) == (PWR_APCR_I3CPB7_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable the pull-up on I3C1_SCL (PB8) in standby mode + * @rmtoll APCR I3CPB8_PU LL_PWR_EnableI3CPB8PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableI3CPB8PU(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_I3CPB8_PU); +} + +/** + * @brief Disable the pull-up on I3C1_SCL (PB8) in standby mode + * @rmtoll APCR I3CPB8_PU LL_PWR_DisableI3CPB8PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableI3CPB8PU(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_I3CPB8_PU); +} + +/** + * @brief Check if the pull-up on I3C1_SCL (PB8) in standby mode is enabled + * @rmtoll APCR I3CPB8_PU LL_PWR_IsEnabledI3CPB8PU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledI3CPB8PU(void) +{ + return ((READ_BIT(PWR->APCR, PWR_APCR_I3CPB8_PU) == (PWR_APCR_I3CPB8_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable the pull-up on I3C1_SDA (PB9) in standby mode + * @rmtoll APCR I3CPB9_PU LL_PWR_EnableI3CPB9PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableI3CPB9PU(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_I3CPB9_PU); +} + +/** + * @brief Disable the pull-up on I3C1_SDA (PB9) in standby mode + * @rmtoll APCR I3CPB9_PU LL_PWR_DisableI3CPB9PU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableI3CPB9PU(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_I3CPB9_PU); +} + +/** + * @brief Check if the pull-up on I3C1_SDA (PB9) in standby mode is enabled + * @rmtoll APCR I3CPB9_PU LL_PWR_IsEnabledI3CPB9PU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledI3CPB9PU(void) +{ + return ((READ_BIT(PWR->APCR, PWR_APCR_I3CPB9_PU) == (PWR_APCR_I3CPB9_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable the pull-up and pull-down configuration + * @rmtoll APCR APC LL_PWR_EnablePUPDConfig + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDConfig(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_APC); +} + +/** + * @brief Disable the pull-up and pull-down configuration + * @rmtoll APCR APC LL_PWR_DisablePUPDConfig + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDConfig(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_APC); +} + +/** + * @brief Check if the pull-up and pull-down configuration is enabled. + * @rmtoll APCR APC LL_PWR_IsEnabledPUPDConfig + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDConfig(void) +{ + return ((READ_BIT(PWR->APCR, PWR_APCR_APC) == (PWR_APCR_APC)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO N pull-up in Standby mode + * @rmtoll PUCRN PUx LL_PWR_EnableGPIONPullUp + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_EnableGPIONPullUp(uint32_t GPIOPin) +{ + SET_BIT(PWR->PUCRN, GPIOPin); +} + +/** + * @brief Disable GPIO N pull-up in Standby mode + * @rmtoll PUCRN PUx LL_PWR_DisableGPIONPullUp + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_DisableGPIONPullUp(uint32_t GPIOPin) +{ + CLEAR_BIT(PWR->PUCRN, GPIOPin); +} + +/** + * @brief Check if GPIO pull-up in Standby mode is enabled + * @rmtoll PUCRN PUx LL_PWR_IsEnabledGPIONPullUp + * @param GPIOPin This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIONPullUp(uint32_t GPIOPin) +{ + return ((READ_BIT(PWR->PUCRN, GPIOPin) == (GPIOPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO O pull-up in Standby mode + * @rmtoll PUCRO PUx LL_PWR_EnableGPIOOPullUp + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_4 + + * @retval None. + */ +__STATIC_INLINE void LL_PWR_EnableGPIOOPullUp(uint32_t GPIOPin) +{ + SET_BIT(PWR->PUCRO, GPIOPin); +} + +/** + * @brief Disable GPIO O pull-up in Standby mode + * @rmtoll PUCRO PUx LL_PWR_DisableGPIOOPullUp + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_DisableGPIOOPullUp(uint32_t GPIOPin) +{ + CLEAR_BIT(PWR->PUCRO, GPIOPin); +} + +/** + * @brief Check if GPIO O pull-up in Standby mode is enabled + * @rmtoll PUCRO PUx LL_PWR_IsEnabledGPIOOPullUp + * @param GPIOPin This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOOPullUp(uint32_t GPIOPin) +{ + return ((READ_BIT(PWR->PUCRO, GPIOPin) == (GPIOPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO N pull-down in Standby mode + * @rmtoll PDCRN PDx LL_PWR_EnableGPIONPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_EnableGPIONPullDown(uint32_t GPIOPin) +{ + SET_BIT(PWR->PDCRN, GPIOPin); +} + +/** + * @brief Disable GPIO N pull-down in Standby mode + * @rmtoll PDCRN PDx LL_PWR_DisableGPIONPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_DisableGPIONPullDown(uint32_t GPIOPin) +{ + CLEAR_BIT(PWR->PDCRN, GPIOPin); +} + +/** + * @brief Check if GPIO N pull-down in Standby mode is enabled + * @rmtoll PDCRN PDx LL_PWR_IsEnabledGPIONPullDown + * @param GPIOPin This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_6 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIONPullDown(uint32_t GPIOPin) +{ + return ((READ_BIT(PWR->PDCRN, GPIOPin) == (GPIOPin)) ? 1UL : 0UL); +} +/** + * @brief Enable GPIO O pull-down in Standby mode + * @rmtoll PDCRO PDx LL_PWR_EnableGPIOOPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_3 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_EnableGPIOOPullDown(uint32_t GPIOPin) +{ + SET_BIT(PWR->PDCRO, GPIOPin); +} + +/** + * @brief Disable GPIO O pull-down in Standby mode + * @rmtoll PDCRO PDx LL_PWR_DisableGPIOOPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_3 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_DisableGPIOOPullDown(uint32_t GPIOPin) +{ + CLEAR_BIT(PWR->PDCRO, GPIOPin); +} + +/** + * @brief Check if GPIO O pull-down in Standby mode is enabled + * @rmtoll PDCRO PDx LL_PWR_IsEnabledGPIOOPullDown + * @param GPIOPin This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_1 + * @arg @ref LL_PWR_GPIO_PIN_2 + * @arg @ref LL_PWR_GPIO_PIN_3 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOOPullDown(uint32_t GPIOPin) +{ + return ((READ_BIT(PWR->PDCRO, GPIOPin) == (GPIOPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO P pull-down in Standby mode + * @rmtoll PDCRP PDx LL_PWR_EnableGPIOPPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPPullDown(uint32_t GPIOPin) +{ + SET_BIT(PWR->PDCRP, GPIOPin); +} + +/** + * @brief Disable GPIO P pull-down in Standby mode + * @rmtoll PDCRP PDx LL_PWR_DisableGPIOPPullDown + * @param GPIOPin This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval None. + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPPullDown(uint32_t GPIOPin) +{ + CLEAR_BIT(PWR->PDCRP, GPIOPin); +} + +/** + * @brief Check if GPIO P pull-down in Standby mode is enabled + * @rmtoll PDCRP PDx LL_PWR_IsEnabledGPIOPPullDown + * @param GPIOPin This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_PIN_0 + * @arg @ref LL_PWR_GPIO_PIN_4 + * @arg @ref LL_PWR_GPIO_PIN_8 + * @arg @ref LL_PWR_GPIO_PIN_12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPPullDown(uint32_t GPIOPin) +{ + return ((READ_BIT(PWR->PDCRP, GPIOPin) == (GPIOPin)) ? 1UL : 0UL); +} +/** + * @} + */ + + +/** @defgroup PWR_LL_EF_FLAG_MANAGEMENT PWR FLAG Management + * @{ + */ + +/** + * @brief Indicate whether the voltage level is ready for current actual used VOS + * @rmtoll SR1 ACTVOSRDY LL_PWR_IsActiveFlag_ACTVOSRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ACTVOSRDY(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_ACTVOSRDY) == (PWR_SR1_ACTVOSRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll SR1 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_PVDO) == (PWR_SR1_PVDO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDDA voltage is below the selected AVD threshold + * @rmtoll SR1 AVDO LL_PWR_IsActiveFlag_AVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_AVDO(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_AVDO) == (PWR_SR1_AVDO)) ? 1UL : 0UL); +} + +/** + * @brief Get Backup Regulator ready Flag + * @rmtoll CSR1 BRRDY LL_PWR_IsActiveFlag_BRRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRRDY(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_BRRDY) == (PWR_CSR1_BRRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below low threshold + * @rmtoll CSR1 VBATL LL_PWR_IsActiveFlag_VBATL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATL(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_VBATL) == (PWR_CSR1_VBATL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below high threshold + * @rmtoll CSR1 VBATH LL_PWR_IsActiveFlag_VBATH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATH(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_VBATH) == (PWR_CSR1_VBATH)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below low threshold + * @rmtoll CSR1 TEMPL LL_PWR_IsActiveFlag_TEMPL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPL(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_TEMPL) == (PWR_CSR1_TEMPL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below high threshold + * @rmtoll CSR1 TEMPH LL_PWR_IsActiveFlag_TEMPH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPH(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_TEMPH) == (PWR_CSR1_TEMPH)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the SMPS external supply is ready or not + * @rmtoll CSR2 SDEXTRDY LL_PWR_IsActiveFlag_SDEXTRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SDEXTRDY(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_SDEXTRDY) == (PWR_CSR2_SDEXTRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the USB supply is ready or not + * @rmtoll CSR2 USB33RDY LL_PWR_IsActiveFlag_USB33RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_USB33RDY(void) +{ + return ((READ_BIT(PWR->CSR2, PWR_CSR2_USB33RDY) == (PWR_CSR2_USB33RDY)) ? 1UL : 0UL); +} + +/** + * @brief Get System Stop Flag + * @rmtoll CSR3 STOPF LL_PWR_IsActiveFlag_STOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_STOP(void) +{ + return ((READ_BIT(PWR->CSR3, PWR_CSR3_STOPF) == (PWR_CSR3_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Get System Standby Flag + * @rmtoll CSR3 SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->CSR3, PWR_CSR3_SBF) == (PWR_CSR3_SBF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the Regulator is ready in the selected voltage range + * or if its output voltage is still changing to the required voltage level + * @rmtoll CSR4 VOSRDY LL_PWR_IsActiveFlag_VOSRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOSRDY(void) +{ + return ((READ_BIT(PWR->CSR4, PWR_CSR4_VOSRDY) == (PWR_CSR4_VOSRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll WKUPFR WKUPF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) == (PWR_WKUPFR_WKUPF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll WKUPFR WKUPF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF2) == (PWR_WKUPFR_WKUPF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 3 + * @rmtoll WKUPFR WKUPF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF3) == (PWR_WKUPFR_WKUPF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll WKUPFR WKUPF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF4) == (PWR_WKUPFR_WKUPF4)) ? 1UL : 0UL); +} + +/** + * @brief Clear STOP and STANDBY and flags + * @rmtoll CSR3 CSSF LL_PWR_ClearFlag_STOP_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_STOP_SB(void) +{ + SET_BIT(PWR->CSR3, PWR_CSR3_CSSF); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll WKUPCR WKUPC1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC1); +} + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll WKUPCR WKUPC2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC2); +} + +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll WKUPCR WKUPC3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC3); +} + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll WKUPCR WKUPC4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC4); +} + +/** + * @brief Clear all wake up flags. + * @rmtoll WUSCR WKUPC LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC); +} + +/** + * @} + */ + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* defined (USE_FULL_LL_DRIVER) */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_PWR_H */ + + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rcc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rcc.h new file mode 100644 index 000000000..e06db0c12 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rcc.h @@ -0,0 +1,5931 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_RCC_H +#define STM32H7RSxx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" +#include + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Constants RCC Private Constants + * @{ + */ +/* + LL_CLKSOURCE() macro output description + + 31 24 16 8 0 + -------------------------------------------------------- + | Mask | ClkSource | Bit | Register | + | | Config | Position | Offset | + -------------------------------------------------------- +*/ +#define LL_RCC_REG_SHIFT 0U +#define LL_RCC_POS_SHIFT 8U +#define LL_RCC_CONFIG_SHIFT 16U +#define LL_RCC_MASK_SHIFT 24U + +/* Clock source register offset vs CCIPR1 register */ +#define CCIPR1_OFFSET 0x0UL +#define CCIPR2_OFFSET 0x4UL +#define CCIPR3_OFFSET 0x8UL +#define CCIPR4_OFFSET 0xCUL + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) +#endif + +#define LL_CLKSOURCE_SHIFT(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_POS_SHIFT ) & 0x1FUL) + +#define LL_CLKSOURCE_MASK(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_MASK_SHIFT ) &\ + 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_CONFIG(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_CONFIG_SHIFT) &\ + 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_REG(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_REG_SHIFT ) & 0xFFUL) + +#define LL_CLKSOURCE(__REG__, __MSK__, __POS__, __CLK__) ((uint32_t)((((__MSK__) >> (__POS__)) << LL_RCC_MASK_SHIFT) | \ + (( __POS__ ) << LL_RCC_POS_SHIFT) | \ + (( __REG__ ) << LL_RCC_REG_SHIFT) | \ + (((__CLK__) >> (__POS__)) << LL_RCC_CONFIG_SHIFT))) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; + uint32_t CPUCLK_Frequency; + uint32_t HCLK_Frequency; + uint32_t PCLK1_Frequency; + uint32_t PCLK2_Frequency; + uint32_t PCLK4_Frequency; + uint32_t PCLK5_Frequency; +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @brief PLL Clocks Frequency Structure + */ +typedef struct +{ + uint32_t PLL_P_Frequency; + uint32_t PLL_Q_Frequency; + uint32_t PLL_R_Frequency; + uint32_t PLL_S_Frequency; + uint32_t PLL_T_Frequency; +} LL_PLL_ClocksTypeDef; + +/** + * @brief PLL Spread Spectrum Mode Structure + */ +typedef struct +{ + uint16_t ModulationPeriod; /* Modulation Period (value between 0 to 2^13-1) */ + uint16_t IncrementStep; /* Modulation Depth (value between 0 to 2^15-1) */ + uint16_t SpreadMode; /* LL_RCC_PLL_SPREAD_CENTER or LL_RCC_PLL_SPREAD_DOWN */ + uint16_t DitheringRPDFN; /* Rectangular probability density function noise enable/disable */ + uint16_t DitheringTPDFN; /* Triangular probability density function noise enable/disable */ +} LL_PLL_SpreadSpectrumTypeDef; + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported variables --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Variables RCC Exported Variables + * @{ + */ +extern const uint8_t LL_RCC_PrescTable[16]; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 24000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (CSI_VALUE) +#define CSI_VALUE 4000000U /*!< Value of the CSI oscillator in Hz */ +#endif /* CSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ + +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSIDIV HSI oscillator divider + * @{ + */ +#define LL_RCC_HSI_DIV_1 0U +#define LL_RCC_HSI_DIV_2 RCC_CR_HSIDIV_0 +#define LL_RCC_HSI_DIV_4 RCC_CR_HSIDIV_1 +#define LL_RCC_HSI_DIV_8 RCC_CR_HSIDIV +/** + * @} + */ + +/** @defgroup LL_RCC_EC_XSPI1SWP XSXPI1 kernel clock switch position + * @{ + */ +#define LL_RCC_SWP_XSPI1_NEUTRAL 0U +#define LL_RCC_SWP_XSPI1_HCLK5 RCC_CKPROTR_XSPI1SWP_0 +#define LL_RCC_SWP_XSPI1_PLL2S RCC_CKPROTR_XSPI1SWP_1 +#define LL_RCC_SWP_XSPI1_PLL2T (RCC_CKPROTR_XSPI1SWP_1 | RCC_CKPROTR_XSPI1SWP_0) +#define LL_RCC_SWP_XSPI1_HCLK_DIV4 RCC_CKPROTR_XSPI1SWP_2 +/** + * @} + */ + +/** @defgroup LL_RCC_EC_XSPI2SWP SXPI2 kernel clock switch position + * @{ + */ +#define LL_RCC_SWP_XSPI2_NEUTRAL 0U +#define LL_RCC_SWP_XSPI2_HCLK5 RCC_CKPROTR_XSPI2SWP_0 +#define LL_RCC_SWP_XSPI2_PLL2S RCC_CKPROTR_XSPI2SWP_1 +#define LL_RCC_SWP_XSPI2_PLL2T (RCC_CKPROTR_XSPI2SWP_1 | RCC_CKPROTR_XSPI2SWP_0) +#define LL_RCC_SWP_XSPI2_HCLK_DIV4 RCC_CKPROTR_XSPI2SWP_2 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_FMCSWP FMC kernel clock switch position + * @{ + */ +#define LL_RCC_SWP_FMC_NEUTRAL 0U +#define LL_RCC_SWP_FMC_HCLK5 RCC_CKPROTR_FMCSWP_0 +#define LL_RCC_SWP_FMC_PLL1Q RCC_CKPROTR_FMCSWP_1 +#define LL_RCC_SWP_FMC_PLL2R (RCC_CKPROTR_FMCSWP_1 | RCC_CKPROTR_FMCSWP_0) +#define LL_RCC_SWP_FMC_HSI RCC_CKPROTR_FMCSWP_2 +#define LL_RCC_SWP_FMC_HCLK_DIV4 (RCC_CKPROTR_FMCSWP_2 | RCC_CKPROTR_FMCSWP_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0U +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI 0U +#define LL_RCC_SYS_CLKSOURCE_CSI RCC_CFGR_SW_0 +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_1 +#define LL_RCC_SYS_CLKSOURCE_PLL1 (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI 0U /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_CSI RCC_CFGR_SWS_0 /*!< CSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_1 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< PLL1 used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSWAKEUP_CLKSOURCE System wakeup clock source + * @{ + */ +#define LL_RCC_SYSWAKEUP_CLKSOURCE_HSI 0U +#define LL_RCC_SYSWAKEUP_CLKSOURCE_CSI RCC_CFGR_STOPWUCK +/** + * @} + */ + +/** @defgroup RCC_LL_EC_KERWAKEUP_CLKSOURCE Kernel wakeup clock source + * @{ + */ +#define LL_RCC_KERWAKEUP_CLKSOURCE_HSI 0U +#define LL_RCC_KERWAKEUP_CLKSOURCE_CSI RCC_CFGR_STOPKERWUCK +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV System prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 0U +#define LL_RCC_SYSCLK_DIV_2 RCC_CDCFGR_CPRE_3 +#define LL_RCC_SYSCLK_DIV_4 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_0) +#define LL_RCC_SYSCLK_DIV_8 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_1) +#define LL_RCC_SYSCLK_DIV_16 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_1 | RCC_CDCFGR_CPRE_0) +#define LL_RCC_SYSCLK_DIV_64 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2) +#define LL_RCC_SYSCLK_DIV_128 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2 | RCC_CDCFGR_CPRE_0) +#define LL_RCC_SYSCLK_DIV_256 (RCC_CDCFGR_CPRE_3 | RCC_CDCFGR_CPRE_2 | RCC_CDCFGR_CPRE_1) +#define LL_RCC_SYSCLK_DIV_512 RCC_CDCFGR_CPRE +/** + * @} + */ + +/** @defgroup RCC_LL_EC_AHB_DIV AHB prescaler + * @{ + */ +#define LL_RCC_AHB_DIV_1 0U +#define LL_RCC_AHB_DIV_2 RCC_BMCFGR_BMPRE_3 +#define LL_RCC_AHB_DIV_4 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_0) +#define LL_RCC_AHB_DIV_8 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_1) +#define LL_RCC_AHB_DIV_16 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_1 | RCC_BMCFGR_BMPRE_0) +#define LL_RCC_AHB_DIV_64 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2) +#define LL_RCC_AHB_DIV_128 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2 | RCC_BMCFGR_BMPRE_0) +#define LL_RCC_AHB_DIV_256 (RCC_BMCFGR_BMPRE_3 | RCC_BMCFGR_BMPRE_2 | RCC_BMCFGR_BMPRE_1) +#define LL_RCC_AHB_DIV_512 RCC_BMCFGR_BMPRE +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB1 prescaler + * @{ + */ +#define LL_RCC_APB1_DIV_1 0U +#define LL_RCC_APB1_DIV_2 RCC_APBCFGR_PPRE1_2 +#define LL_RCC_APB1_DIV_4 (RCC_APBCFGR_PPRE1_2 | RCC_APBCFGR_PPRE1_0) +#define LL_RCC_APB1_DIV_8 (RCC_APBCFGR_PPRE1_2 | RCC_APBCFGR_PPRE1_1) +#define LL_RCC_APB1_DIV_16 RCC_APBCFGR_PPRE1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB2 prescaler + * @{ + */ +#define LL_RCC_APB2_DIV_1 0U +#define LL_RCC_APB2_DIV_2 RCC_APBCFGR_PPRE2_2 +#define LL_RCC_APB2_DIV_4 (RCC_APBCFGR_PPRE2_2 | RCC_APBCFGR_PPRE2_0) +#define LL_RCC_APB2_DIV_8 (RCC_APBCFGR_PPRE2_2 | RCC_APBCFGR_PPRE2_1) +#define LL_RCC_APB2_DIV_16 RCC_APBCFGR_PPRE2 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB4_DIV APB4 prescaler + * @{ + */ +#define LL_RCC_APB4_DIV_1 0U +#define LL_RCC_APB4_DIV_2 RCC_APBCFGR_PPRE4_2 +#define LL_RCC_APB4_DIV_4 (RCC_APBCFGR_PPRE4_2 | RCC_APBCFGR_PPRE4_0) +#define LL_RCC_APB4_DIV_8 (RCC_APBCFGR_PPRE4_2 | RCC_APBCFGR_PPRE4_1) +#define LL_RCC_APB4_DIV_16 RCC_APBCFGR_PPRE4 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB5_DIV APB5 prescaler + * @{ + */ +#define LL_RCC_APB5_DIV_1 0U +#define LL_RCC_APB5_DIV_2 RCC_APBCFGR_PPRE5_2 +#define LL_RCC_APB5_DIV_4 (RCC_APBCFGR_PPRE5_2 | RCC_APBCFGR_PPRE5_0) +#define LL_RCC_APB5_DIV_8 (RCC_APBCFGR_PPRE5_2 | RCC_APBCFGR_PPRE5_1) +#define LL_RCC_APB5_DIV_16 RCC_APBCFGR_PPRE5 +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_HSI ((RCC_CFGR_MCO1SEL>>16U) | 0U) +#define LL_RCC_MCO1SOURCE_LSE ((RCC_CFGR_MCO1SEL>>16U) | RCC_CFGR_MCO1SEL_0) +#define LL_RCC_MCO1SOURCE_HSE ((RCC_CFGR_MCO1SEL>>16U) | RCC_CFGR_MCO1SEL_1) +#define LL_RCC_MCO1SOURCE_PLL1Q ((RCC_CFGR_MCO1SEL>>16U) | RCC_CFGR_MCO1SEL_1 | RCC_CFGR_MCO1SEL_0) +#define LL_RCC_MCO1SOURCE_HSI48 ((RCC_CFGR_MCO1SEL>>16U) | RCC_CFGR_MCO1SEL_2) +#define LL_RCC_MCO2SOURCE_SYSCLK ((RCC_CFGR_MCO2SEL>>16U) | 0U) +#define LL_RCC_MCO2SOURCE_PLL2P ((RCC_CFGR_MCO2SEL>>16U) | RCC_CFGR_MCO2SEL_0) +#define LL_RCC_MCO2SOURCE_HSE ((RCC_CFGR_MCO2SEL>>16U) | RCC_CFGR_MCO2SEL_1) +#define LL_RCC_MCO2SOURCE_PLL1P ((RCC_CFGR_MCO2SEL>>16U) | RCC_CFGR_MCO2SEL_1 | RCC_CFGR_MCO2SEL_0) +#define LL_RCC_MCO2SOURCE_CSI ((RCC_CFGR_MCO2SEL>>16U) | RCC_CFGR_MCO2SEL_2) +#define LL_RCC_MCO2SOURCE_LSI ((RCC_CFGR_MCO2SEL>>16U) | RCC_CFGR_MCO2SEL_2 | RCC_CFGR_MCO2SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0) +#define LL_RCC_MCO1_DIV_2 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_3 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_4 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_5 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_6 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_7 ((RCC_CFGR_MCO1PRE>>16U) |\ + RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_8 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_9 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_10 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_11 ((RCC_CFGR_MCO1PRE>>16U) |\ + RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_12 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_13 ((RCC_CFGR_MCO1PRE>>16U) |\ + RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_14 ((RCC_CFGR_MCO1PRE>>16U) |\ + RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_15 ((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE) +#define LL_RCC_MCO2_DIV_1 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0) +#define LL_RCC_MCO2_DIV_2 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_3 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_4 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_5 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_6 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_7 ((RCC_CFGR_MCO2PRE>>16U) |\ + RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_8 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_9 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_10 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_11 ((RCC_CFGR_MCO2PRE>>16U) |\ + RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_12 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_13 ((RCC_CFGR_MCO2PRE>>16U) |\ + RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_14 ((RCC_CFGR_MCO2PRE>>16U) |\ + RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_15 ((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE) + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock + * @{ + */ +#define LL_RCC_RTC_NOCLOCK 0U +#define LL_RCC_RTC_HSE_DIV_2 (RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_4 (RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_8 (RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3 |\ + RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_16 (RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4 |\ + RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_32 (RCC_CFGR_RTCPRE_5) +#define LL_RCC_RTC_HSE_DIV_33 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_34 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_35 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_36 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_37 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_38 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_39 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_40 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_41 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_42 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_43 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_44 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_45 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_46 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_47 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_48 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_49 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_50 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_51 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_52 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_53 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_54 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_55 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_56 (RCC_CFGR_RTCPRE_5 | RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_57 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_58 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_59 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_60 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_61 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_62 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_63 (RCC_CFGR_RTCPRE_5 |\ + RCC_CFGR_RTCPRE_4 | RCC_CFGR_RTCPRE_3 | RCC_CFGR_RTCPRE_2 | RCC_CFGR_RTCPRE_1 | RCC_CFGR_RTCPRE_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_PLL2P 0U +#define LL_RCC_ADC_CLKSOURCE_PLL3R RCC_CCIPR1_ADCSEL_0 +#define LL_RCC_ADC_CLKSOURCE_CLKP RCC_CCIPR1_ADCSEL_1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADFx_CLKSOURCE Peripheral ADF clock source selection + * @{ + */ +#define LL_RCC_ADF1_CLKSOURCE_HCLK 0U +#define LL_RCC_ADF1_CLKSOURCE_PLL2P RCC_CCIPR1_ADF1SEL_0 +#define LL_RCC_ADF1_CLKSOURCE_PLL3P RCC_CCIPR1_ADF1SEL_1 +#define LL_RCC_ADF1_CLKSOURCE_I2S_CKIN (RCC_CCIPR1_ADF1SEL_1 | RCC_CCIPR1_ADF1SEL_0) +#define LL_RCC_ADF1_CLKSOURCE_CSI RCC_CCIPR1_ADF1SEL_2 +#define LL_RCC_ADF1_CLKSOURCE_HSI (RCC_CCIPR1_ADF1SEL_2 | RCC_CCIPR1_ADF1SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_LSE 0U +#define LL_RCC_CEC_CLKSOURCE_LSI RCC_CCIPR2_CECSEL_0 +#define LL_RCC_CEC_CLKSOURCE_CSI_DIV_122 RCC_CCIPR2_CECSEL_1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLKP_CLKSOURCE Peripheral CLKP clock source selection + * @{ + */ +#define LL_RCC_CLKP_CLKSOURCE_HSI 0U +#define LL_RCC_CLKP_CLKSOURCE_CSI RCC_CCIPR1_CKPERSEL_0 +#define LL_RCC_CLKP_CLKSOURCE_HSE RCC_CCIPR1_CKPERSEL_1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ETHxPHY_CLKSOURCE Peripheral ETHPHY clock source selection + * @{ + */ +#define LL_RCC_ETH1PHY_CLKSOURCE_HSE 0U +#define LL_RCC_ETH1PHY_CLKSOURCE_PLL3S RCC_CCIPR1_ETH1PHYCKSEL +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ETHxREF_CLKSOURCE Peripheral ETHREF clock source selection + * @{ + */ +#define LL_RCC_ETH1REF_CLKSOURCE_RMII 0U +#define LL_RCC_ETH1REF_CLKSOURCE_HSE RCC_CCIPR1_ETH1REFCKSEL_0 +#define LL_RCC_ETH1REF_CLKSOURCE_FB RCC_CCIPR1_ETH1REFCKSEL_1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE Peripheral FDCAN clock source selection + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE_HSE 0U +#define LL_RCC_FDCAN_CLKSOURCE_PLL1Q RCC_CCIPR2_FDCANSEL_0 +#define LL_RCC_FDCAN_CLKSOURCE_PLL2Q RCC_CCIPR2_FDCANSEL_1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_FMC_CLKSOURCE Peripheral FMC clock source selection + * @{ + */ +#define LL_RCC_FMC_CLKSOURCE_HCLK 0U +#define LL_RCC_FMC_CLKSOURCE_PLL1Q RCC_CCIPR1_FMCSEL_0 +#define LL_RCC_FMC_CLKSOURCE_PLL2R RCC_CCIPR1_FMCSEL_1 +#define LL_RCC_FMC_CLKSOURCE_HSI (RCC_CCIPR1_FMCSEL_1 | RCC_CCIPR1_FMCSEL_0) +#define LL_RCC_FMC_CLKSOURCE_HCLK_DIV4 LL_RCC_SWP_FMC_HCLK_DIV4 /* Recovery: Read-only */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C1_I3C1SEL, RCC_CCIPR2_I2C1_I3C1SEL_Pos, 0U) +#define LL_RCC_I2C1_CLKSOURCE_PLL3R LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C1_I3C1SEL, RCC_CCIPR2_I2C1_I3C1SEL_Pos, RCC_CCIPR2_I2C1_I3C1SEL_0) +#define LL_RCC_I2C1_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C1_I3C1SEL, RCC_CCIPR2_I2C1_I3C1SEL_Pos, RCC_CCIPR2_I2C1_I3C1SEL_1) +#define LL_RCC_I2C1_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C1_I3C1SEL, RCC_CCIPR2_I2C1_I3C1SEL_Pos, RCC_CCIPR2_I2C1_I3C1SEL_1 |\ + RCC_CCIPR2_I2C1_I3C1SEL_0) + +#define LL_RCC_I2C23_CLKSOURCE_PCLK1 LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C23SEL, RCC_CCIPR2_I2C23SEL_Pos, 0U) +#define LL_RCC_I2C23_CLKSOURCE_PLL3R LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C23SEL, RCC_CCIPR2_I2C23SEL_Pos, RCC_CCIPR2_I2C23SEL_0) +#define LL_RCC_I2C23_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C23SEL, RCC_CCIPR2_I2C23SEL_Pos, RCC_CCIPR2_I2C23SEL_1) +#define LL_RCC_I2C23_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C23SEL, RCC_CCIPR2_I2C23SEL_Pos, RCC_CCIPR2_I2C23SEL_1 |\ + RCC_CCIPR2_I2C23SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I3Cx_CLKSOURCE Peripheral I3C clock source selection + * @{ + */ +#define LL_RCC_I3C1_CLKSOURCE_PCLK1 0U +#define LL_RCC_I3C1_CLKSOURCE_PLL3R RCC_CCIPR2_I2C1_I3C1SEL_0 +#define LL_RCC_I3C1_CLKSOURCE_HSI RCC_CCIPR2_I2C1_I3C1SEL_1 +#define LL_RCC_I3C1_CLKSOURCE_CSI (RCC_CCIPR2_I2C1_I3C1SEL_1 | RCC_CCIPR2_I2C1_I3C1SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, 0U) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, RCC_CCIPR2_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL3R LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, RCC_CCIPR2_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, RCC_CCIPR2_LPTIM1SEL_1 |\ + RCC_CCIPR2_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_LSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, RCC_CCIPR2_LPTIM1SEL_2) +#define LL_RCC_LPTIM1_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, RCC_CCIPR2_LPTIM1SEL_2 |\ + RCC_CCIPR2_LPTIM1SEL_0) + +#define LL_RCC_LPTIM23_CLKSOURCE_PCLK4 LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, 0U) +#define LL_RCC_LPTIM23_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, RCC_CCIPR4_LPTIM23SEL_0) +#define LL_RCC_LPTIM23_CLKSOURCE_PLL3R LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, RCC_CCIPR4_LPTIM23SEL_1) +#define LL_RCC_LPTIM23_CLKSOURCE_LSE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, RCC_CCIPR4_LPTIM23SEL_1 |\ + RCC_CCIPR4_LPTIM23SEL_0) +#define LL_RCC_LPTIM23_CLKSOURCE_LSI LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, RCC_CCIPR4_LPTIM23SEL_2) +#define LL_RCC_LPTIM23_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, RCC_CCIPR4_LPTIM23SEL_2 |\ + RCC_CCIPR4_LPTIM23SEL_0) + +#define LL_RCC_LPTIM45_CLKSOURCE_PCLK4 LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, 0U) +#define LL_RCC_LPTIM45_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, RCC_CCIPR4_LPTIM45SEL_0) +#define LL_RCC_LPTIM45_CLKSOURCE_PLL3R LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, RCC_CCIPR4_LPTIM45SEL_1) +#define LL_RCC_LPTIM45_CLKSOURCE_LSE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, RCC_CCIPR4_LPTIM45SEL_1 |\ + RCC_CCIPR4_LPTIM45SEL_0) +#define LL_RCC_LPTIM45_CLKSOURCE_LSI LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, RCC_CCIPR4_LPTIM45SEL_2) +#define LL_RCC_LPTIM45_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, RCC_CCIPR4_LPTIM45SEL_2 |\ + RCC_CCIPR4_LPTIM45SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE_PCLK4 0U +#define LL_RCC_LPUART1_CLKSOURCE_PLL2Q RCC_CCIPR4_LPUART1SEL_0 +#define LL_RCC_LPUART1_CLKSOURCE_PLL3Q RCC_CCIPR4_LPUART1SEL_1 +#define LL_RCC_LPUART1_CLKSOURCE_HSI (RCC_CCIPR4_LPUART1SEL_1 | RCC_CCIPR4_LPUART1SEL_0) +#define LL_RCC_LPUART1_CLKSOURCE_CSI RCC_CCIPR4_LPUART1SEL_2 +#define LL_RCC_LPUART1_CLKSOURCE_LSE (RCC_CCIPR4_LPUART1SEL_2 | RCC_CCIPR4_LPUART1SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LTDC_CLKSOURCE Peripheral LTDC clock source selection + * @{ + */ +#define LL_RCC_LTDC_CLKSOURCE_PLL3R 0U +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PSSI_CLKSOURCE Peripheral PSSI clock source selection + * @{ + */ +#define LL_RCC_PSSI_CLKSOURCE_PLL3R 0U +#define LL_RCC_PSSI_CLKSOURCE_CLKP RCC_CCIPR1_PSSISEL +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection + * @{ + */ +#define LL_RCC_SAI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, 0U) +#define LL_RCC_SAI1_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, RCC_CCIPR3_SAI1SEL_0) +#define LL_RCC_SAI1_CLKSOURCE_PLL3P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, RCC_CCIPR3_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, RCC_CCIPR3_SAI1SEL_0 |\ + RCC_CCIPR3_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, RCC_CCIPR3_SAI1SEL_2) + +#define LL_RCC_SAI2_CLKSOURCE_PLL1Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, 0U) +#define LL_RCC_SAI2_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, RCC_CCIPR3_SAI2SEL_0) +#define LL_RCC_SAI2_CLKSOURCE_PLL3P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, RCC_CCIPR3_SAI2SEL_1) +#define LL_RCC_SAI2_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, RCC_CCIPR3_SAI2SEL_1 |\ + RCC_CCIPR3_SAI2SEL_0) +#define LL_RCC_SAI2_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, RCC_CCIPR3_SAI2SEL_2) +#define LL_RCC_SAI2_CLKSOURCE_SPDIFRX LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, RCC_CCIPR3_SAI1SEL_2 |\ + RCC_CCIPR3_SAI2SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SDMMC_CLKSOURCE Peripheral SDMMC clock source selection + * @{ + */ +#define LL_RCC_SDMMC_CLKSOURCE_PLL2S 0U +#define LL_RCC_SDMMC_CLKSOURCE_PLL2T RCC_CCIPR1_SDMMC12SEL +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPDIF_CLKSOURCE Peripheral SPDIF clock source selection + * @{ + */ +#define LL_RCC_SPDIFRX_CLKSOURCE_PLL1Q 0U +#define LL_RCC_SPDIFRX_CLKSOURCE_PLL2R RCC_CCIPR2_SPDIFRXSEL_0 +#define LL_RCC_SPDIFRX_CLKSOURCE_PLL3R RCC_CCIPR2_SPDIFRXSEL_1 +#define LL_RCC_SPDIFRX_CLKSOURCE_HSI (RCC_CCIPR2_SPDIFRXSEL_0 | RCC_CCIPR2_SPDIFRXSEL_1) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPIx_CLKSOURCE Peripheral SPI clock source selection + * @{ + */ +#define LL_RCC_SPI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, 0U) +#define LL_RCC_SPI1_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, RCC_CCIPR3_SPI1SEL_0) +#define LL_RCC_SPI1_CLKSOURCE_PLL3P LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, RCC_CCIPR3_SPI1SEL_1) +#define LL_RCC_SPI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, RCC_CCIPR3_SPI1SEL_1 |\ + RCC_CCIPR3_SPI1SEL_0) +#define LL_RCC_SPI1_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, RCC_CCIPR3_SPI1SEL_2) + +#define LL_RCC_SPI23_CLKSOURCE_PLL1Q LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, 0U) +#define LL_RCC_SPI23_CLKSOURCE_PLL2P LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, RCC_CCIPR2_SPI23SEL_0) +#define LL_RCC_SPI23_CLKSOURCE_PLL3P LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, RCC_CCIPR2_SPI23SEL_1) +#define LL_RCC_SPI23_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, RCC_CCIPR2_SPI23SEL_1 |\ + RCC_CCIPR2_SPI23SEL_0) +#define LL_RCC_SPI23_CLKSOURCE_CLKP LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, RCC_CCIPR2_SPI23SEL_2) + +#define LL_RCC_SPI45_CLKSOURCE_PCLK2 LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, 0U) +#define LL_RCC_SPI45_CLKSOURCE_PLL2Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, RCC_CCIPR3_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_PLL3Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, RCC_CCIPR3_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, RCC_CCIPR3_SPI45SEL_1 |\ + RCC_CCIPR3_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, RCC_CCIPR3_SPI45SEL_2) +#define LL_RCC_SPI45_CLKSOURCE_HSE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, RCC_CCIPR3_SPI45SEL_2 |\ + RCC_CCIPR3_SPI45SEL_0) + +#define LL_RCC_SPI6_CLKSOURCE_PCLK4 LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, 0U) +#define LL_RCC_SPI6_CLKSOURCE_PLL2Q LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, RCC_CCIPR4_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_PLL3Q LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, RCC_CCIPR4_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, RCC_CCIPR4_SPI6SEL_1 |\ + RCC_CCIPR4_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, RCC_CCIPR4_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_HSE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, RCC_CCIPR4_SPI6SEL_2 |\ + RCC_CCIPR4_SPI6SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK2 LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, 0U) +#define LL_RCC_USART1_CLKSOURCE_PLL2Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, RCC_CCIPR3_USART1SEL_0) +#define LL_RCC_USART1_CLKSOURCE_PLL3Q LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, RCC_CCIPR3_USART1SEL_1) +#define LL_RCC_USART1_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, RCC_CCIPR3_USART1SEL_1 |\ + RCC_CCIPR3_USART1SEL_0) +#define LL_RCC_USART1_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, RCC_CCIPR3_USART1SEL_2) +#define LL_RCC_USART1_CLKSOURCE_LSE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, RCC_CCIPR3_USART1SEL_2 |\ + RCC_CCIPR3_USART1SEL_0) + +#define LL_RCC_USART234578_CLKSOURCE_PCLK1 LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, 0U) +#define LL_RCC_USART234578_CLKSOURCE_PLL2Q LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, RCC_CCIPR2_UART234578SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_PLL3Q LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, RCC_CCIPR2_UART234578SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_HSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, RCC_CCIPR2_UART234578SEL_1 |\ + RCC_CCIPR2_UART234578SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_CSI LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, RCC_CCIPR2_UART234578SEL_2) +#define LL_RCC_USART234578_CLKSOURCE_LSE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, RCC_CCIPR2_UART234578SEL_2 |\ + RCC_CCIPR2_UART234578SEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_OTGFS_CLKSOURCE Peripheral OTGFS kernel clock source selection + * @{ + */ +#define LL_RCC_OTGFS_CLKSOURCE_HSI48 0U +#define LL_RCC_OTGFS_CLKSOURCE_PLL3Q RCC_CCIPR1_OTGFSSEL_0 +#define LL_RCC_OTGFS_CLKSOURCE_HSE RCC_CCIPR1_OTGFSSEL_1 +#define LL_RCC_OTGFS_CLKSOURCE_CLK48 (RCC_CCIPR1_OTGFSSEL_1 | RCC_CCIPR1_OTGFSSEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USBPHYC_CLKSOURCE Peripheral USBPHYC kernel clock source selection + * @{ + */ +#define LL_RCC_USBPHYC_CLKSOURCE_HSE 0U +#define LL_RCC_USBPHYC_CLKSOURCE_HSE_DIV_2 RCC_CCIPR1_USBPHYCSEL_0 +#define LL_RCC_USBPHYC_CLKSOURCE_PLL3Q RCC_CCIPR1_USBPHYCSEL_1 +#define LL_RCC_USBPHYC_CLKSOURCE_DISABLE (RCC_CCIPR1_USBPHYCSEL_1 | RCC_CCIPR1_USBPHYCSEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USBREF_CLKSOURCE Peripheral USBREF clock source selection + * @{ + */ +#define LL_RCC_USBREF_CLKSOURCE_16M (RCC_CCIPR1_USBREFCKSEL_1 | RCC_CCIPR1_USBREFCKSEL_0) +#define LL_RCC_USBREF_CLKSOURCE_19_2M RCC_CCIPR1_USBREFCKSEL_3 +#define LL_RCC_USBREF_CLKSOURCE_20M (RCC_CCIPR1_USBREFCKSEL_3 | RCC_CCIPR1_USBREFCKSEL_0) +#define LL_RCC_USBREF_CLKSOURCE_24M (RCC_CCIPR1_USBREFCKSEL_3 | RCC_CCIPR1_USBREFCKSEL_1) +#define LL_RCC_USBREF_CLKSOURCE_26M (RCC_CCIPR1_USBREFCKSEL_3 |\ + RCC_CCIPR1_USBREFCKSEL_2 | RCC_CCIPR1_USBREFCKSEL_1) +#define LL_RCC_USBREF_CLKSOURCE_32M (RCC_CCIPR1_USBREFCKSEL_3 |\ + RCC_CCIPR1_USBREFCKSEL_1 | RCC_CCIPR1_USBREFCKSEL_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_XSPI_CLKSOURCE Peripheral XSPI clock source selection + * @{ + */ +#define LL_RCC_XSPI1_CLKSOURCE_HCLK LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI1SEL, RCC_CCIPR1_XSPI1SEL_Pos, 0U) +#define LL_RCC_XSPI1_CLKSOURCE_PLL2S LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI1SEL, RCC_CCIPR1_XSPI1SEL_Pos, RCC_CCIPR1_XSPI1SEL_0) +#define LL_RCC_XSPI1_CLKSOURCE_PLL2T LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI1SEL, RCC_CCIPR1_XSPI1SEL_Pos, RCC_CCIPR1_XSPI1SEL_1) +#define LL_RCC_XSPI1_CLKSOURCE_HCLK_DIV4 LL_RCC_SWP_XSPI1_HCLK_DIV4 /* Recovery: Read-only */ + +#define LL_RCC_XSPI2_CLKSOURCE_HCLK LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI2SEL, RCC_CCIPR1_XSPI2SEL_Pos, 0U) +#define LL_RCC_XSPI2_CLKSOURCE_PLL2S LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI2SEL, RCC_CCIPR1_XSPI2SEL_Pos, RCC_CCIPR1_XSPI2SEL_0) +#define LL_RCC_XSPI2_CLKSOURCE_PLL2T LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI2SEL, RCC_CCIPR1_XSPI2SEL_Pos, RCC_CCIPR1_XSPI2SEL_1) +#define LL_RCC_XSPI2_CLKSOURCE_HCLK_DIV4 LL_RCC_SWP_XSPI2_HCLK_DIV4 /* Recovery: Read-only */ +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_ADC_CLKSOURCE + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR1_ADCSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_ADFx_CLKSOURCE + * @{ + */ +#define LL_RCC_ADF1_CLKSOURCE RCC_CCIPR1_ADF1SEL +/** + * @} + */ + + +/** @addtogroup RCC_LL_EC_CEC_CLKSOURCE + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_CCIPR2_CECSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_CLKP_CLKSOURCE + * @{ + */ +#define LL_RCC_CLKP_CLKSOURCE RCC_CCIPR1_CKPERSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_ETHxPHY_CLKSOURCE + * @{ + */ +#define LL_RCC_ETH1PHY_CLKSOURCE RCC_CCIPR1_ETH1PHYCKSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_ETHxREF_CLKSOURCE + * @{ + */ +#define LL_RCC_ETH1REF_CLKSOURCE RCC_CCIPR1_ETH1REFCKSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_FDCAN_CLKSOURCE + * @{ + */ +#define LL_RCC_FDCAN_CLKSOURCE RCC_CCIPR2_FDCANSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_FMC_CLKSOURCE + * @{ + */ +#define LL_RCC_FMC_CLKSOURCE RCC_CCIPR1_FMCSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_I2Cx_CLKSOURCE + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C1_I3C1SEL, RCC_CCIPR2_I2C1_I3C1SEL_Pos, 0U) +#define LL_RCC_I2C23_CLKSOURCE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_I2C23SEL, RCC_CCIPR2_I2C23SEL_Pos, 0U) +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_I3Cx_CLKSOURCE + * @{ + */ +#define LL_RCC_I3C1_CLKSOURCE RCC_CCIPR2_I2C1_I3C1SEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_LPTIMx_CLKSOURCE + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_LPTIM1SEL, RCC_CCIPR2_LPTIM1SEL_Pos, 0U) +#define LL_RCC_LPTIM23_CLKSOURCE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM23SEL, RCC_CCIPR4_LPTIM23SEL_Pos, 0U) +#define LL_RCC_LPTIM45_CLKSOURCE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_LPTIM45SEL, RCC_CCIPR4_LPTIM45SEL_Pos, 0U) +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_LPUARTx_CLKSOURCE + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR4_LPUART1SEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_OTGFS_CLKSOURCE + * @{ + */ +#define LL_RCC_OTGFS_CLKSOURCE RCC_CCIPR1_OTGFSSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_PSSI_CLKSOURCE + * @{ + */ +#define LL_RCC_PSSI_CLKSOURCE RCC_CCIPR1_PSSISEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_SAIx_CLKSOURCE + * @{ + */ +#define LL_RCC_SAI1_CLKSOURCE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI1SEL, RCC_CCIPR3_SAI1SEL_Pos, 0U) +#define LL_RCC_SAI2_CLKSOURCE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SAI2SEL, RCC_CCIPR3_SAI2SEL_Pos, 0U) +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_SDMMC_CLKSOURCE + * @{ + */ +#define LL_RCC_SDMMC_CLKSOURCE RCC_CCIPR1_SDMMC12SEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_SPDIFRX_CLKSOURCE + * @{ + */ +#define LL_RCC_SPDIFRX_CLKSOURCE RCC_CCIPR2_SPDIFRXSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_SPIx_CLKSOURCE + * @{ + */ +#define LL_RCC_SPI1_CLKSOURCE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI1SEL, RCC_CCIPR3_SPI1SEL_Pos, 0U) +#define LL_RCC_SPI23_CLKSOURCE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_SPI23SEL, RCC_CCIPR2_SPI23SEL_Pos, 0U) +#define LL_RCC_SPI45_CLKSOURCE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_SPI45SEL, RCC_CCIPR3_SPI45SEL_Pos, 0U) +#define LL_RCC_SPI6_CLKSOURCE LL_CLKSOURCE(CCIPR4_OFFSET, RCC_CCIPR4_SPI6SEL, RCC_CCIPR4_SPI6SEL_Pos, 0U) +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_USARTx_CLKSOURCE + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE LL_CLKSOURCE(CCIPR3_OFFSET, RCC_CCIPR3_USART1SEL, RCC_CCIPR3_USART1SEL_Pos, 0U) +#define LL_RCC_USART234578_CLKSOURCE LL_CLKSOURCE(CCIPR2_OFFSET, RCC_CCIPR2_UART234578SEL, RCC_CCIPR2_UART234578SEL_Pos, 0U) +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_USBPHYC_CLKSOURCE + * @{ + */ +#define LL_RCC_USBPHYC_CLKSOURCE RCC_CCIPR1_USBPHYCSEL +/** + * @} + */ + +/** @addtogroup RCC_LL_EC_USBREF_CLKSOURCE + * @{ + */ +#define LL_RCC_USBREF_CLKSOURCE RCC_CCIPR1_USBREFCKSEL +/** + * @} + */ + + +/** @addtogroup RCC_LL_EC_XSPIx_CLKSOURCE + * @{ + */ +#define LL_RCC_XSPI1_CLKSOURCE LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI1SEL, RCC_CCIPR1_XSPI1SEL_Pos, 0U) +#define LL_RCC_XSPI2_CLKSOURCE LL_CLKSOURCE(CCIPR1_OFFSET, RCC_CCIPR1_XSPI2SEL, RCC_CCIPR1_XSPI2SEL_Pos, 0U) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0U +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 +#define LL_RCC_RTC_CLKSOURCE_HSE (RCC_BDCR_RTCSEL_0 | RCC_BDCR_RTCSEL_1) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection + * @{ + */ +#define LL_RCC_TIM_PRESCALER_DISABLE 0U +#define LL_RCC_TIM_PRESCALER_ENABLE RCC_CFGR_TIMPRE +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSOURCE All PLLs entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI 0U +#define LL_RCC_PLLSOURCE_CSI RCC_PLLCKSELR_PLLSRC_0 +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCKSELR_PLLSRC_1 +#define LL_RCC_PLLSOURCE_NONE (RCC_PLLCKSELR_PLLSRC_1 | RCC_PLLCKSELR_PLLSRC_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLINPUTRANGE All PLLs input range + * @{ + */ +#define LL_RCC_PLLINPUTRANGE_1_2 0U +#define LL_RCC_PLLINPUTRANGE_2_4 RCC_PLLCFGR_PLL1RGE_0 +#define LL_RCC_PLLINPUTRANGE_4_8 RCC_PLLCFGR_PLL1RGE_1 +#define LL_RCC_PLLINPUTRANGE_8_16 (RCC_PLLCFGR_PLL1RGE_1 | RCC_PLLCFGR_PLL1RGE_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLVCORANGE All PLLs VCO range + * @{ + */ +#define LL_RCC_PLLVCORANGE_WIDE 0U /*!< VCO output range: 400 to 1600 MHz */ +#define LL_RCC_PLLVCORANGE_MEDIUM RCC_PLLCFGR_PLL1VCOSEL /*!< VCO output range: 150 to 420 MHz */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_SPREAD_SEL PLL Spread Spectrum Selection + * @{ + */ +#define LL_RCC_PLL_SPREAD_CENTER 0U /*!< PLL center spread spectrum selection */ +#define LL_RCC_PLL_SPREAD_DOWN RCC_PLL1SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_DITHERING_TPDFN PLL Dithering TPDF Noise Control + * @{ + */ +#define LL_RCC_PLL_DITHERING_TPDFN_ENABLE 0U /*!< PLL Dithering TPDF Noise injection enabled */ +#define LL_RCC_PLL_DITHERING_TPDFN_DISABLE RCC_PLL1SSCGR_TPDFNDIS /*!< PLL Dithering TPDF Noise injection disabled */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_DITHERING_RPDFN PLL Dithering RPDF Noise Control + * @{ + */ +#define LL_RCC_PLL_DITHERING_RPDFN_ENABLE 0U /*!< PLL Dithering RPDF Noise injection enabled */ +#define LL_RCC_PLL_DITHERING_RPDFN_DISABLE RCC_PLL1SSCGR_RPDFNDIS /*!< PLL Dithering RPDF Noise injection disabled */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the SYSCLK frequency + * @param __SYSINPUTCLKFREQ__ Frequency of the input of sys_ck (based on HSE/CSI/HSI/PLL1P) + * @param __SYSPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval SYSCLK clock frequency (in Hz) + */ +#define LL_RCC_CALC_SYSCLK_FREQ(__SYSINPUTCLKFREQ__, __SYSPRESCALER__) ((__SYSINPUTCLKFREQ__) >> ((LL_RCC_PrescTable[((__SYSPRESCALER__) &\ + RCC_CDCFGR_CPRE) >> RCC_CDCFGR_CPRE_Pos]) & 0x1FU)) + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency. + * @param __HPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __HPRESCALER__) ((__SYSCLKFREQ__) >> ((LL_RCC_PrescTable[((__HPRESCALER__) &\ + RCC_BMCFGR_BMPRE) >> RCC_BMCFGR_BMPRE_Pos]) & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB1PRESCALER__) &\ + RCC_APBCFGR_PPRE1) >> RCC_APBCFGR_PPRE1_Pos]) & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#define LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB2PRESCALER__) &\ + RCC_APBCFGR_PPRE2) >> RCC_APBCFGR_PPRE2_Pos]) & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK4 frequency (ABP4) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB4PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define LL_RCC_CALC_PCLK4_FREQ(__HCLKFREQ__, __APB4PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB4PRESCALER__) &\ + RCC_APBCFGR_PPRE4) >> RCC_APBCFGR_PPRE4_Pos]) & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK5 frequency (APB5) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB5PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB5_DIV_1 + * @arg @ref LL_RCC_APB5_DIV_2 + * @arg @ref LL_RCC_APB5_DIV_4 + * @arg @ref LL_RCC_APB5_DIV_8 + * @arg @ref LL_RCC_APB5_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define LL_RCC_CALC_PCLK5_FREQ(__HCLKFREQ__, __APB5PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB5PRESCALER__) &\ + RCC_APBCFGR_PPRE5) >> RCC_APBCFGR_PPRE5_Pos]) & 0x1FU)) + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @note Once HSE Clock Security System is enabled it cannot be changed anymore unless + * a reset occurs or system enter in standby mode. + * @rmtoll CR HSECSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSECSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Select the Analog HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); +} + +/** + * @brief Select the Digital HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == RCC_CR_HSERDY) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RCC_CR_HSIRDY) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI new divider applied and ready + * @rmtoll CR HSIDIVF LL_RCC_HSI_IsDividerReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsDividerReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIDIVF) == RCC_CR_HSIDIVF) ? 1UL : 0UL); +} + +/** + * @brief Set HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_SetDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @retval None. + */ +__STATIC_INLINE void LL_RCC_HSI_SetDivider(uint32_t Divider) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, Divider); +} + +/** + * @brief Get HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_GetDivider + * @retval can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetDivider(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} + +/** + * @brief Enable HSI oscillator in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI oscillator in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI oscillator in Stop mode has been enabled or not + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Enable XSPI clock protection + * @rmtoll CKPROTR XSPICKP LL_RCC_EnableXSPIClockProtection + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableXSPIClockProtection(void) +{ + SET_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPICKP); +} + +/** + * @brief Disable XSPI clock protection + * @rmtoll CKPROTR XSPICKP LL_RCC_DisableXSPIClockProtection + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableXSPIClockProtection(void) +{ + CLEAR_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPICKP); +} + +/** + * @brief Check if XSPI clock protection has been enabled or not + * @rmtoll CKPROTR XSPICKP LL_RCC_IsEnabledXSPIClockProtection + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledXSPIClockProtection(void) +{ + return ((READ_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPICKP) == (RCC_CKPROTR_XSPICKP)) ? 1UL : 0UL); +} + +/** + * @brief Enable FMC clock protection + * @rmtoll CKPROTR FMCCKP LL_RCC_EnableFMCClockProtection + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableFMCClockProtection(void) +{ + SET_BIT(RCC->CKPROTR, RCC_CKPROTR_FMCCKP); +} + +/** + * @brief Disable FMC clock protection + * @rmtoll CKPROTR FMCCKP LL_RCC_DisableFMCClockProtection + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableFMCClockProtection(void) +{ + CLEAR_BIT(RCC->CKPROTR, RCC_CKPROTR_FMCCKP); +} + +/** + * @brief Check if FMC clock protection has been enabled or not + * @rmtoll CKPROTR FMCCKP LL_RCC_IsEnabledFMCClockProtection + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledFMCClockProtection(void) +{ + return ((READ_BIT(RCC->CKPROTR, RCC_CKPROTR_FMCCKP) == (RCC_CKPROTR_FMCCKP)) ? 1UL : 0UL); +} + +/** + * @brief Get XSPI2 kernel clock switch position + * @rmtoll CKPROTR XSPI2SWP LL_RCC_GetXSPI2SwitchPosition + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWP_XSPI2_NEUTRAL + @arg @ref LL_RCC_SWP_XSPI2_HCLK5 + @arg @ref LL_RCC_SWP_XSPI2_PLL2S + @arg @ref LL_RCC_SWP_XSPI2_PLL2T + @arg @ref LL_RCC_SWP_XSPI2_HCLK_DIV4 + */ +__STATIC_INLINE uint32_t LL_RCC_GetXSPI2SwitchPosition(void) +{ + return (READ_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPI2SWP)); +} + +/** + * @brief Get XSPI1 kernel clock switch position + * @rmtoll CKPROTR XSPI1SWP LL_RCC_GetXSPI1SwitchPosition + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWP_XSPI1_NEUTRAL + @arg @ref LL_RCC_SWP_XSPI1_HCLK5 + @arg @ref LL_RCC_SWP_XSPI1_PLL2S + @arg @ref LL_RCC_SWP_XSPI1_PLL2T + @arg @ref LL_RCC_SWP_XSPI1_HCLK_DIV4 + */ +__STATIC_INLINE uint32_t LL_RCC_GetXSPI1SwitchPosition(void) +{ + return (READ_BIT(RCC->CKPROTR, RCC_CKPROTR_XSPI1SWP)); +} + +/** + * @brief Get FMC kernel clock switch position + * @rmtoll CKPROTR FMCSWP LL_RCC_GetFMCSwitchPosition + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWP_FMC_NEUTRAL + @arg @ref LL_RCC_SWP_FMC_HCLK5 + @arg @ref LL_RCC_SWP_FMC_PLL1Q + @arg @ref LL_RCC_SWP_FMC_PLL2R + @arg @ref LL_RCC_SWP_FMC_HSI + @arg @ref LL_RCC_SWP_FMC_HCLK_DIV4 + */ +__STATIC_INLINE uint32_t LL_RCC_GetFMCSwitchPosition(void) +{ + return (READ_BIT(RCC->CKPROTR, RCC_CKPROTR_FMCSWP)); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll HSICFGR HSICAL LL_RCC_HSI_GetCalibration + * @retval A value between 0 and 4095 (0xFFF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSICAL) >> RCC_HSICFGR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64, which, when added to the HSICAL value, + * should trim the HSI to 64 MHz +/- 1 % + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Parameter can be a value between 0 and 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, Value << RCC_HSICFGR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval A value between 0 and 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_CSI CSI + * @{ + */ + +/** + * @brief Enable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Disable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Check if CSI clock is ready + * @rmtoll CR CSIRDY LL_RCC_CSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CSIRDY) == RCC_CR_CSIRDY) ? 1UL : 0UL); +} + +/** + * @brief Enable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Disable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Check if CSI oscillator in Stop mode has been enabled or not + * @rmtoll CR CSIKERON LL_RCC_CSI_IsEnabledStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_IsEnabledStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CSIKERON) == (RCC_CR_CSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Get CSI Calibration value + * @note When CSITRIM is written, CSICAL is updated with the sum of + * CSITRIM and the factory trim value + * @rmtoll CSICFGR CSICAL LL_RCC_CSI_GetCalibration + * @retval A value between 0 and 255 (0xFF) + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSICAL) >> RCC_CSICFGR_CSICAL_Pos); +} + +/** + * @brief Set CSI Calibration trimming + * @note user-programmable trimming value that is added to the CSICAL + * @note Default value is 16, which, when added to the CSICAL value, + * should trim the CSI to 4 MHz +/- 1 % + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_SetCalibTrimming + * @param Value can be a value between 0 and 31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, Value << RCC_CSICFGR_CSITRIM_Pos); +} + +/** + * @brief Get CSI Calibration trimming + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_GetCalibTrimming + * @retval A value between 0 and 31 + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 clock is ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == RCC_CR_HSI48RDY) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @note When HSI48TRIM is written, HSI48CAL is updated with the sum of + * HSI48TRIM and the factory trim value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval A value between 0 and 1023 (0x3FF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable the Clock Security System on LSE. + * @note Once LSE Clock Security System is enabled it cannot be changed anymore unless + * a clock failure is detected. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable the Clock Security System on LSE. + * @note Once LSE Clock Security System is enabled it cannot be changed anymore unless + * a clock failure is detected. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE failure is detected by Clock Security System + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsFailureDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsFailureDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == RCC_BDCR_LSECSSD) ? 1UL : 0UL); +} + +/** + * @brief Re-arm the Clock Security System on LSE. + * @note Once a clock failure is detected, the LSE Clock Security System can be re-armed providing that + * LSECSSON is disabled. + * @rmtoll BDCR LSECSSRA LL_RCC_LSE_ReArmCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_ReArmCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSRA); +} + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Enable Low-speed external DIGITAL clock type in Bypass mode (not to be used if RTC is active). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} + +/** + * @brief Enable Low-speed external ANALOG clock type in Bypass mode (default after Backup domain reset). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == RCC_BDCR_LSERDY) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == RCC_CSR_LSIRDY) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Configure the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_SetSysWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Source); +} + +/** + * @brief Get the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_GetSysWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK)); +} + +/** + * @brief Configure the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_SetKerWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetKerWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, Source); +} + +/** + * @brief Get the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_GetKerWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetKerWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPKERWUCK)); +} + +/** + * @brief Set System prescaler + * @rmtoll CDCFGR CPRE LL_RCC_SetSysPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CDCFGR, RCC_CDCFGR_CPRE, Prescaler); +} + +/** + * @brief Set AHB prescaler + * @rmtoll BMCFGR BMPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->BMCFGR, RCC_BMCFGR_BMPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll APBCFGR PPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE1, Prescaler); +} + +/** + * @brief Set APB2 prescaler + * @rmtoll APBCFGR PPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE2, Prescaler); +} + +/** + * @brief Set APB4 prescaler + * @rmtoll APBCFGR PPRE4 LL_RCC_SetAPB4Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB4Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE4, Prescaler); +} + +/** + * @brief Set APB5 prescaler + * @rmtoll APBCFGR PPRE5 LL_RCC_SetAPB5Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB5_DIV_1 + * @arg @ref LL_RCC_APB5_DIV_2 + * @arg @ref LL_RCC_APB5_DIV_4 + * @arg @ref LL_RCC_APB5_DIV_8 + * @arg @ref LL_RCC_APB5_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB5Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE5, Prescaler); +} + +/** + * @brief Get System prescaler + * @rmtoll CDCFGR CPRE LL_RCC_GetSysPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CDCFGR, RCC_CDCFGR_CPRE)); +} + +/** + * @brief Get AHB prescaler + * @rmtoll BMCFGR BMPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->BMCFGR, RCC_BMCFGR_BMPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll APBCFGR PPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE1)); +} + +/** + * @brief Get APB2 prescaler + * @rmtoll APBCFGR PPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE2)); +} + +/** + * @brief Get APB4 prescaler + * @rmtoll APBCFGR PPRE4 LL_RCC_GetAPB4Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB4Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE4)); +} + +/** + * @brief Get APB5 prescaler + * @rmtoll APBCFGR PPRE5 LL_RCC_GetAPB5Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB5_DIV_1 + * @arg @ref LL_RCC_APB5_DIV_2 + * @arg @ref LL_RCC_APB5_DIV_4 + * @arg @ref LL_RCC_APB5_DIV_8 + * @arg @ref LL_RCC_APB5_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB5Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE5)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO1SEL LL_RCC_ConfigMCO\n + * CFGR MCO1PRE LL_RCC_ConfigMCO\n + * CFGR MCO2SEL LL_RCC_ConfigMCO\n + * CFGR MCO2PRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLL1Q + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLL2P + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLL1P + * @arg @ref LL_RCC_MCO2SOURCE_CSI + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_3 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_5 + * @arg @ref LL_RCC_MCO1_DIV_6 + * @arg @ref LL_RCC_MCO1_DIV_7 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_9 + * @arg @ref LL_RCC_MCO1_DIV_10 + * @arg @ref LL_RCC_MCO1_DIV_11 + * @arg @ref LL_RCC_MCO1_DIV_12 + * @arg @ref LL_RCC_MCO1_DIV_13 + * @arg @ref LL_RCC_MCO1_DIV_14 + * @arg @ref LL_RCC_MCO1_DIV_15 + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_3 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_5 + * @arg @ref LL_RCC_MCO2_DIV_6 + * @arg @ref LL_RCC_MCO2_DIV_7 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_9 + * @arg @ref LL_RCC_MCO2_DIV_10 + * @arg @ref LL_RCC_MCO2_DIV_11 + * @arg @ref LL_RCC_MCO2_DIV_12 + * @arg @ref LL_RCC_MCO2_DIV_13 + * @arg @ref LL_RCC_MCO2_DIV_14 + * @arg @ref LL_RCC_MCO2_DIV_15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, (MCOxSource << 16U) | (MCOxPrescaler << 16U), (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure periph clock source + * @rmtoll CCIPR1 * LL_RCC_SetClockSource\n + * CCIPR2 * LL_RCC_SetClockSource\n + * CCIPR3 * LL_RCC_SetClockSource\n + * CCIPR4 * LL_RCC_SetClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C23_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_SPDIFRX + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2T + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2T + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetClockSource(uint32_t ClkSource) +{ + volatile uint32_t *pReg = (uint32_t *)((uint32_t)&RCC->CCIPR1 + LL_CLKSOURCE_REG(ClkSource)); + MODIFY_REG(*pReg, LL_CLKSOURCE_MASK(ClkSource), LL_CLKSOURCE_CONFIG(ClkSource)); +} + +/** + * @brief Configure ADCx Kernel clock source + * @rmtoll CCIPR1 ADCSEL LL_RCC_SetADCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ADCSEL, ClkSource); +} + +/** + * @brief Configure ADFx Kernel clock source + * @rmtoll CCIPR1 ADF1SEL LL_RCC_SetADFClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADF1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_ADF1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_ADF1_CLKSOURCE_CSI + * @arg @ref LL_RCC_ADF1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADFClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ADF1SEL, ClkSource); +} + +/** + * @brief Configure CECx clock source + * @rmtoll CCIPR2 CECSEL LL_RCC_SetCECClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV_122 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_CECSEL, ClkSource); +} + +/** + * @brief Configure CLKP Kernel clock source + * @rmtoll CCIPR1 CKPERSEL LL_RCC_SetCLKPClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCLKPClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_CKPERSEL, ClkSource); +} + +/** + * @brief Configure ETHx PHY clock source + * @rmtoll CCIPR1 ETH1PHYCKSEL LL_RCC_SetETHPHYClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE_HSE + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE_PLL3S + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetETHPHYClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ETH1PHYCKSEL, ClkSource); +} + +/** + * @brief Configure ETHx REF clock source + * @rmtoll CCIPR1 ETH1REFCKSEL LL_RCC_SetETHREFClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_RMII + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_HSE + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_FB + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetETHREFClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_ETH1REFCKSEL, ClkSource); +} + +/** + * @brief Configure FDCANx Kernel clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_SetFDCANClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, ClkSource); +} + +/** + * @brief Configure FMCx Kernel clock source + * @rmtoll CCIPR1 FMCSEL LL_RCC_SetFMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFMCClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_FMCSEL, ClkSource); +} + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR2 I2C1_I3C1SEL LL_RCC_SetI2CClockSource + * @rmtoll CCIPR2 I2C23SEL LL_RCC_SetI2CClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C23_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure I3Cx clock source + * @rmtoll CCIPR2 I2C1_I3C1SEL LL_RCC_SetI3CClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I3C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I3C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I3C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I3C1_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI3CClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL, ClkSource); +} + +/** + * @brief Configure LPTIMx clock source + * @rmtoll CCIPR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource\n + * CCIPR4 LPTIM23SEL LL_RCC_SetLPTIMClockSource\n + * CCIPR4 LPTIM45SEL LL_RCC_SetLPTIMClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure LPUARTx clock source + * @rmtoll CCIPR4 LPUART1SEL LL_RCC_SetLPUARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR4, RCC_CCIPR4_LPUART1SEL, ClkSource); +} + +/** + * @brief Configure OTGFSx clock source + * @rmtoll CCIPR1 OTGFSSEL LL_RCC_SetOTGFSClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_CLK48 + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_HSE + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_PLL3Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetOTGFSClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_OTGFSSEL, ClkSource); +} + +/** + * @brief Configure XSPIx Kernel clock source + * @rmtoll CCIPR1 XSPI1SEL LL_RCC_SetXSPIClockSource\n + * CCIPR1 XSPI2SEL LL_RCC_SetXSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2T + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2T + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetXSPIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure PSSI clock source + * @rmtoll CCIPR1 PSSISEL LL_RCC_SetPSSIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PSSI_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_PSSI_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetPSSIClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_PSSISEL, ClkSource); +} + +/** + * @brief Configure SAIx clock source + * @rmtoll CCIPR3 SAI1SEL LL_RCC_SetSAIClockSource\n + * CCIPR3 SAI2SEL LL_RCC_SetSAIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_SPDIFRX + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SDMMCx clock source + * @rmtoll CCIPR1 SDMMCSEL LL_RCC_SetSDMMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2T + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_SDMMC12SEL, ClkSource); +} + +/** + * @brief Configure SPDIFRX Kernel clock source + * @rmtoll CCIPR2 SPDIFRXSEL LL_RCC_SetSPDIFRXClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPDIFRXClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SPDIFRXSEL, ClkSource); +} + +/** + * @brief Configure SPIx Kernel clock source + * @rmtoll CCIPR3 SPI1SEL LL_RCC_SetSPIClockSource\n + * CCIPR2 SPI23SEL LL_RCC_SetSPIClockSource\n + * CCIPR3 SPI45SEL LL_RCC_SetSPIClockSource\n + * CCIPR4 SPI6SEL LL_RCC_SetSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR3 USART1SEL LL_RCC_SetUSARTClockSource\n + * CCIPR2 UART234578SEL LL_RCC_SetUSARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure USBPHYC clock source + * @rmtoll CCIPR1 USBPHYCSEL LL_RCC_SetUSBPHYCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_HSE + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_HSE_DIV_2 + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_PLL3Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBPHYCClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_USBPHYCSEL, ClkSource); +} + +/** + * @brief Configure USBREF clock source + * @rmtoll CCIPR1 USBREFCKSEL LL_RCC_SetUSBREFClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USBREF_CLKSOURCE_16M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_19_2M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_20M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_24M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_26M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_32M + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBREFClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->CCIPR1, RCC_CCIPR1_USBREFCKSEL, ClkSource); +} + +/** + * @brief Get periph clock source + * @rmtoll CCIPR1 * LL_RCC_GetClockSource\n + * CCIPR2 * LL_RCC_GetClockSource\n + * CCIPR3 * LL_RCC_GetClockSource\n + * CCIPR4 * LL_RCC_GetClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C23_CLKSOURCE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI2_CLKSOURCE + * @arg @ref LL_RCC_SPI1_CLKSOURCE + * @arg @ref LL_RCC_SPI23_CLKSOURCE + * @arg @ref LL_RCC_SPI45_CLKSOURCE + * @arg @ref LL_RCC_SPI6_CLKSOURCE + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @arg @ref LL_RCC_XSPI1_CLKSOURCE + * @arg @ref LL_RCC_XSPI2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C23_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_SPDIFRX + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2T + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2T + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetClockSource(uint32_t Periph) +{ + const volatile uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&RCC->CCIPR1) + LL_CLKSOURCE_REG(Periph))); + return (uint32_t)(Periph | (((READ_BIT(*pReg, LL_CLKSOURCE_MASK(Periph))) >> LL_CLKSOURCE_SHIFT(Periph)) << LL_RCC_CONFIG_SHIFT)); +} + +/** + * @brief Get ADC Kernel clock source + * @rmtoll CCIPR1 ADCSEL LL_RCC_GetADCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ADCSEL)); +} + +/** + * @brief Get ADF clock source + * @rmtoll CCIPR1 ADF1SEL LL_RCC_GetADFClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ADF1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADF1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADF1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_ADF1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_ADF1_CLKSOURCE_CSI + * @arg @ref LL_RCC_ADF1_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetADFClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ADF1SEL)); +} + +/** + * @brief Get CEC clock source + * @rmtoll CCIPR2 CECSEL LL_RCC_GetCECClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV_122 + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_CECSEL)); +} + +/** + * @brief Get CLKP Kernel clock source + * @rmtoll CCIPR1 CKPERSEL LL_RCC_GetCLKPClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCLKPClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_CKPERSEL)); +} + +/** + * @brief Get ETH PHY clock source + * @rmtoll CCIPR1 ETH1PHYCKSEL LL_RCC_GetETHPHYClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE_HSE + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE_PLL3S + */ +__STATIC_INLINE uint32_t LL_RCC_GetETHPHYClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ETH1PHYCKSEL)); +} + +/** + * @brief Get ETH REF clock source + * @rmtoll CCIPR1 ETH1REFCKSEL LL_RCC_GetETHREFClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_RMII + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_HSE + * @arg @ref LL_RCC_ETH1REF_CLKSOURCE_FB + */ +__STATIC_INLINE uint32_t LL_RCC_GetETHREFClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_ETH1REFCKSEL)); +} + +/** + * @brief Get FDCAN Kernel clock source + * @rmtoll CCIPR2 FDCANSEL LL_RCC_GetFDCANClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL)); +} + +/** + * @brief Get FMC Kernel clock source + * @rmtoll CCIPR1 FMCSEL LL_RCC_GetFMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetFMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_FMCSEL)); +} + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR2 I2C1_I3C1SEL LL_RCC_GetI2CClockSource + * @rmtoll CCIPR2 I2C23SEL LL_RCC_GetI2CClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C23_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C1_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C23_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C23_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get I3Cx clock source + * @rmtoll CCIPR2 I2C1_I3C1SEL LL_RCC_GetI3CClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_I3C1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I3C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I3C1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I3C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I3C1_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI3CClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C1_I3C1SEL)); +} + +/** + * @brief Get LPTIM clock source + * @rmtoll CCIPR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + * CCIPR4 LPTIM23SEL LL_RCC_GetLPTIMClockSource\n + * CCIPR4 LPTIM45SEL LL_RCC_GetLPTIMClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get LPUART clock source + * @rmtoll CCIPR4 LPUART1SEL LL_RCC_GetLPUARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR4, RCC_CCIPR4_LPUART1SEL)); +} + +/** + * @brief Get OTGFS clock source + * @rmtoll CCIPR1 OTGFSSEL LL_RCC_GetOTGFSClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_OTGFS_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_HSE + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_OTGFS_CLKSOURCE_CLK48 + */ +__STATIC_INLINE uint32_t LL_RCC_GetOTGFSClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_OTGFSSEL)); +} + +/** + * @brief Get XSPI Kernel clock source + * @rmtoll CCIPR1 XSPI1SEL LL_RCC_GetXSPIClockSource\n + * CCIPR1 XSPI2SEL LL_RCC_GetXSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_XSPI1_CLKSOURCE + * @arg @ref LL_RCC_XSPI2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI1_CLKSOURCE_PLL2T + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_HCLK + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_XSPI2_CLKSOURCE_PLL2T + */ +__STATIC_INLINE uint32_t LL_RCC_GetXSPIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get PSSI clock source + * @rmtoll CCIPR1 PSSISEL LL_RCC_GetPSSIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_PSSI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PSSI_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_PSSI_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetPSSIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_PSSISEL)); +} + +/** + * @brief Get SAIx clock source + * @rmtoll CCIPR3 SAI1SEL LL_RCC_GetSAIClockSource\n + * CCIPR3 SAI2SEL LL_RCC_GetSAIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI2_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI2_CLKSOURCE_SPDIFRX + */ +__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SDMMC clock source + * @rmtoll CCIPR1 SDMMCSEL LL_RCC_GetSDMMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2S + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2T + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR1, RCC_CCIPR1_SDMMC12SEL)); +} + +/** + * @brief Get SPDIFRX Kernel clock source + * @rmtoll CCIPR2 SPDIFRXSEL LL_RCC_GetSPDIFRXClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPDIFRXClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SPDIFRXSEL)); +} + +/** + * @brief Get SPIx Kernel clock source + * @rmtoll CCIPR3 SPI1SEL LL_RCC_GetSPIClockSource\n + * CCIPR2 SPI23SEL LL_RCC_GetSPIClockSource\n + * CCIPR3 SPI45SEL LL_RCC_GetSPIClockSource\n + * CCIPR4 SPI6SEL LL_RCC_GetSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI1_CLKSOURCE + * @arg @ref LL_RCC_SPI23_CLKSOURCE + * @arg @ref LL_RCC_SPI45_CLKSOURCE + * @arg @ref LL_RCC_SPI6_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI23_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI23_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR3 USART1SEL LL_RCC_GetUSARTClockSource\n + * CCIPR2 UART234578SEL LL_RCC_GetUSARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get USBPHYC clock source + * @rmtoll CCIPR1 USBPHYCSEL LL_RCC_GetUSBPHYCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_HSE + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_HSE_DIV_2 + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE_PLL3Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBPHYCClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (READ_BIT(RCC->CCIPR1, RCC_CCIPR1_USBPHYCSEL)); +} + +/** + * @brief Configure USBREF clock frequency + * @rmtoll CCIPR1 USBREFCKSEL LL_RCC_GetUSBREFClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USBREF_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USBREF_CLKSOURCE_16M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_19_2M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_20M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_24M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_26M + * @arg @ref LL_RCC_USBREF_CLKSOURCE_32M + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBREFClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (READ_BIT(RCC->CCIPR1, RCC_CCIPR1_USBREFCKSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR VSWRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_VSWRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR VSWRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_VSWRST); +} + +/** + * @brief Set HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); +} + +/** + * @brief Get HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM + * @{ + */ + +/** + * @brief Set Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_SetTIMPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_DISABLE + * @arg @ref LL_RCC_TIM_PRESCALER_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_TIMPRE, Prescaler); +} + +/** + * @brief Get Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_GetTIMPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_DISABLE + * @arg @ref LL_RCC_TIM_PRESCALER_ENABLE + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_TIMPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_USBPHYC USBPHYC + * @{ + */ + +/** + * @brief Enable USBPHYC power-down + * @rmtoll AHB1LPENR UCPDCTRL LL_RCC_USBPHYC_EnablePowerDown + * @retval None + */ +__STATIC_INLINE void LL_RCC_USBPHYC_EnablePowerDown(void) +{ + SET_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_UCPDCTRL); +} + +/** + * @brief Disable USBPHYC power-down + * @rmtoll AHB1LPENR UCPDCTRL LL_RCC_USBPHYC_DisablePowerDown + * @retval None + */ +__STATIC_INLINE void LL_RCC_USBPHYC_DisablePowerDown(void) +{ + CLEAR_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_UCPDCTRL); +} + +/** + * @brief Check if USBPHYC is powered-down + * @rmtoll AHB1LPENR UCPDCTRL LL_RCC_USBPHYC_IsEnabledPowerDown + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_USBPHYC_IsEnabledPowerDown(void) +{ + return ((READ_BIT(RCC->AHB1LPENR, RCC_AHB1LPENR_UCPDCTRL) == (RCC_AHB1LPENR_UCPDCTRL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Set the oscillator used as PLL clock source. + * @note PLL clock source is common to all PLLs. + * @note PLLSRC can be written only when all PLLs are disabled. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_SetSource + * @param PLLSource parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC)); +} + +/** + * @brief Enable PLL1 + * @rmtoll CR PLL1ON LL_RCC_PLL1_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Disable PLL1 + * @note Cannot be disabled if the PLL1 clock is used as the system clock + * @rmtoll CR PLL1ON LL_RCC_PLL1_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Check if PLL1 Ready + * @rmtoll CR PLL1RDY LL_RCC_PLL1_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == (RCC_CR_PLL1RDY)) ? 1UL : 0UL); +} + +/** + * @brief Configure PLL1 used for SYSCLK Domain + * @note PLL Source, DIVM1, DIVN and DIVP can be written only when PLL is disabled. + * @note PLLN/PLLR can be written only when PLL is disabled. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL1_ConfigDomain_SYS\n + * PLLCKSELR DIVM1 LL_RCC_PLL1_ConfigDomain_SYS\n + * PLL1DIVR1 DIVN LL_RCC_PLL1_ConfigDomain_SYS\n + * PLL1DIVR1 DIVP LL_RCC_PLL1_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @param M parameter can be a value between 1 and 64 + * @param N parameter can be a value between 8 to 420 + * @param P parameter can be a value between 2 and 128 (odd division factor not supported) + * + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_ConfigDomain_SYS(uint32_t Source, uint32_t M, uint32_t N, uint32_t P) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1 | RCC_PLLCKSELR_PLLSRC, + (M << RCC_PLLCKSELR_DIVM1_Pos) | Source); + MODIFY_REG(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVP | RCC_PLL1DIVR1_DIVN, + ((P - 1UL) << RCC_PLL1DIVR1_DIVP_Pos) | ((N - 1UL) << RCC_PLL1DIVR1_DIVN_Pos)); +} + +/** + * @brief Enable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1PEN LL_RCC_PLL1P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1PEN); +} + +/** + * @brief Enable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1QEN LL_RCC_PLL1Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1QEN); +} + +/** + * @brief Enable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1REN LL_RCC_PLL1R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1REN); +} + +/** + * @brief Enable PLL1S + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1SEN LL_RCC_PLL1S_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1S_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SEN); +} + +/** + * @brief Enable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Check if PLL1 P is enabled + * @rmtoll PLLCFGR PLL1PEN LL_RCC_PLL1P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1PEN) == RCC_PLLCFGR_PLL1PEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 Q is enabled + * @rmtoll PLLCFGR PLL1QEN LL_RCC_PLL1Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1QEN) == RCC_PLLCFGR_PLL1QEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 R is enabled + * @rmtoll PLLCFGR PLL1REN LL_RCC_PLL1R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1REN) == RCC_PLLCFGR_PLL1REN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 S is enabled + * @rmtoll PLLCFGR PLL1SEN LL_RCC_PLL1S_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1S_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SEN) == RCC_PLLCFGR_PLL1SEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 FRACN is enabled + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) == RCC_PLLCFGR_PLL1FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1PEN LL_RCC_PLL1P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1PEN); +} + +/** + * @brief Disable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1QEN LL_RCC_PLL1Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1QEN); +} + +/** + * @brief Disable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1REN LL_RCC_PLL1R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1REN); +} + +/** + * @brief Disable PLL1S + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1SEN LL_RCC_PLL1S_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1S_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SEN); +} + +/** + * @brief Disable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Get PLL1 VCO Input Range + * @rmtoll PLLCFGR PLL1RGE LL_RCC_PLL1_GetVCOInputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetVCOInputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE)); +} + +/** + * @brief Get PLL1 VCO OutputRange + * @rmtoll PLLCFGR PLL1VCOSEL LL_RCC_PLL1_GetVCOOutputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetVCOOutputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL)); +} + +/** + * @brief Set PLL1 VCO Input Range + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1RGE LL_RCC_PLL1_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, InputRange); +} + +/** + * @brief Set PLL1 VCO OutputRange + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1VCOSEL LL_RCC_PLL1_SetVCOOutputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, VCORange); +} + +/** + * @brief Get PLL1 N Coefficient + * @rmtoll PLL1DIVR1 DIVN LL_RCC_PLL1_GetN + * @retval A value between 8 and 420 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVN) >> RCC_PLL1DIVR1_DIVN_Pos) + 1UL); +} + +/** + * @brief Get PLL1 M Coefficient + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Get PLL1 P Coefficient + * @rmtoll PLL1DIVR1 DIVP LL_RCC_PLL1_GetP + * @retval A value between 2 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVP) >> RCC_PLL1DIVR1_DIVP_Pos) + 1UL); +} + +/** + * @brief Get PLL1 Q Coefficient + * @rmtoll PLL1DIVR1 DIVQ LL_RCC_PLL1_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVQ) >> RCC_PLL1DIVR1_DIVQ_Pos) + 1UL); +} + +/** + * @brief Get PLL1 R Coefficient + * @rmtoll PLL1DIVR1 DIVR LL_RCC_PLL1_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVR) >> RCC_PLL1DIVR1_DIVR_Pos) + 1UL); +} + +/** + * @brief Get PLL1 S Coefficient + * @rmtoll PLL1DIVR2 DIVS LL_RCC_PLL1_GetS + * @retval A value between 1 and 8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetS(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR2, RCC_PLL1DIVR2_DIVS) >> RCC_PLL1DIVR2_DIVS_Pos) + 1UL); +} + +/** + * @brief Get PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN LL_RCC_PLL1_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN) >> RCC_PLL1FRACR_FRACN_Pos); +} + +/** + * @brief Set PLL1 N Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR1 DIVN LL_RCC_PLL1_SetN + * @param N parameter can be a value between 8 and 420 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVN, (N - 1UL) << RCC_PLL1DIVR1_DIVN_Pos); +} + +/** + * @brief Set PLL1 M Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_SetM + * @param M parameter can be a value between 1 and 64 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1, M << RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Set PLL1 P Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR1 DIVP LL_RCC_PLL1_SetP + * @param P parameter can be a value between 2 and 128 (odd division factor not supported) + */ +__STATIC_INLINE void LL_RCC_PLL1_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVP, (P - 1UL) << RCC_PLL1DIVR1_DIVP_Pos); +} + +/** + * @brief Set PLL1 Q Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR1 DIVQ LL_RCC_PLL1_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVQ, (Q - 1UL) << RCC_PLL1DIVR1_DIVQ_Pos); +} + +/** + * @brief Set PLL1 R Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR1 DIVR LL_RCC_PLL1_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL1DIVR1, RCC_PLL1DIVR1_DIVR, (R - 1UL) << RCC_PLL1DIVR1_DIVR_Pos); +} + +/** + * @brief Set PLL1 S Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR2 DIVS LL_RCC_PLL1_SetS + * @param S parameter can be a value between 1 and 8 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetS(uint32_t S) +{ + MODIFY_REG(RCC->PLL1DIVR2, RCC_PLL1DIVR2_DIVS, (S - 1UL) << RCC_PLL1DIVR2_DIVS_Pos); +} + +/** + * @brief Set PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN LL_RCC_PLL1_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL1_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN, FRACN << RCC_PLL1FRACR_FRACN_Pos); +} + +/** + * @brief Enable Spread Spectrum for PLL1. + * @note Configuration to be done with LL_RCC_PLL1_ConfigSpreadSpectrum + * @rmtoll PLLCFGR PLL1SSCGEN LL_RCC_PLL1_EnableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_EnableSpreadSpectrum(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SSCGEN); +} + +/** + * @brief Disable Spread Spectrum for PLL1. + * @rmtoll PLLCFGR PLL1SSCGEN LL_RCC_PLL1_DisableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_DisableSpreadSpectrum(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SSCGEN); +} + +/** + * @brief Check if Spread Spectrum for PLL1 is enabled + * @rmtoll PLLCFGR PLL1SSCGEN LL_RCC_PLL1_IsEnabledSpreadSpectrum + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledSpreadSpectrum(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1SSCGEN) == RCC_PLLCFGR_PLL1SSCGEN) ? 1UL : 0UL); +} + +/** + * @brief Get Spread Spectrum Modulation Period for PLL1 + * @rmtoll PLL1SSCGR MODPER LL_RCC_PLL1_GetModulationPeriod + * @retval Between Min_Data=0 and Max_Data=8191 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetModulationPeriod(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1SSCGR, RCC_PLL1SSCGR_MODPER)); +} + +/** + * @brief Get Spread Spectrum Increment Step for PLL1 + * @rmtoll PLL1SSCGR INCSTEP LL_RCC_PLL1_GetIncrementStep + * @retval Between Min_Data=0 and Max_Data=32767 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetIncrementStep(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1SSCGR, RCC_PLL1SSCGR_INCSTEP) >> RCC_PLL1SSCGR_INCSTEP_Pos); +} + +/** + * @brief Get Spread Spectrum Selection for PLL1 + * @rmtoll PLL1SSCGR SPREADSEL LL_RCC_PLL1_GetSpreadSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_SPREAD_CENTER + * @arg @ref LL_RCC_PLL_SPREAD_DOWN + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetSpreadSelection(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1SSCGR, RCC_PLL1SSCGR_SPREADSEL)); +} + +/** + * @brief Check if Dithering RPDF Noise for PLL1 is enabled + * @rmtoll PLL1SSCGR RPDFNDIS LL_RCC_PLL1_IsEnabledRPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledRPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL1SSCGR, RCC_PLL1SSCGR_RPDFNDIS) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Check if Dithering TPDF Noise for PLL1 is enabled + * @rmtoll PLL1SSCGR TPDFNDIS LL_RCC_PLL1_IsEnabledTPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsEnabledTPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL1SSCGR, RCC_PLL1SSCGR_TPDFNDIS) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL2 + * @rmtoll CR PLL2ON LL_RCC_PLL2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Disable PLL2 + * @note Cannot be disabled if the PLL2 clock is used as the system clock + * @rmtoll CR PLL2ON LL_RCC_PLL2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Check if PLL2 Ready + * @rmtoll CR PLL2RDY LL_RCC_PLL2_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL2RDY) == RCC_CR_PLL2RDY) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2PEN LL_RCC_PLL2P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2PEN); +} + +/** + * @brief Enable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2QEN LL_RCC_PLL2Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2QEN); +} + +/** + * @brief Enable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2REN LL_RCC_PLL2R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2REN); +} + +/** + * @brief Enable PLL2S + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2SEN LL_RCC_PLL2S_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2S_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SEN); +} + +/** + * @brief Enable PLL2T + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2TEN LL_RCC_PLL2T_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2T_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2TEN); +} + +/** + * @brief Enable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Check if PLL2 P is enabled + * @rmtoll PLLCFGR PLL2PEN LL_RCC_PLL2P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2PEN) == RCC_PLLCFGR_PLL2PEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 Q is enabled + * @rmtoll PLLCFGR PLL2QEN LL_RCC_PLL2Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2QEN) == RCC_PLLCFGR_PLL2QEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 R is enabled + * @rmtoll PLLCFGR PLL2REN LL_RCC_PLL2R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2REN) == RCC_PLLCFGR_PLL2REN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 S is enabled + * @rmtoll PLLCFGR PLL2SEN LL_RCC_PLL2S_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2S_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SEN) == RCC_PLLCFGR_PLL2SEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 T is enabled + * @rmtoll PLLCFGR PLL2TEN LL_RCC_PLL2T_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2T_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2TEN) == RCC_PLLCFGR_PLL2TEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 FRACN is enabled + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) == RCC_PLLCFGR_PLL2FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2PEN LL_RCC_PLL2P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2PEN); +} + +/** + * @brief Disable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2QEN LL_RCC_PLL2Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2QEN); +} + +/** + * @brief Disable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2REN LL_RCC_PLL2R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2REN); +} + +/** + * @brief Disable PLL2S + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2SEN LL_RCC_PLL2S_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2S_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SEN); +} + +/** + * @brief Disable PLL2T + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2TEN LL_RCC_PLL2T_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2T_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2TEN); +} + +/** + * @brief Disable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Get PLL2 VCO Input Range + * @rmtoll PLLCFGR PLL2RGE LL_RCC_PLL2_GetVCOInputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetVCOInputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE) >> 11U); +} + +/** + * @brief Get PLL2 VCO OutputRange + * @rmtoll PLLCFGR PLL2VCOSEL LL_RCC_PLL2_GetVCOOutputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetVCOOutputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL) >> 11U); +} + +/** + * @brief Set PLL2 VCO Input Range + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2RGE LL_RCC_PLL2_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, (InputRange << 11U)); +} + +/** + * @brief Set PLL2 VCO OutputRange + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2VCOSEL LL_RCC_PLL2_SetVCOOutputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, (VCORange << 11U)); +} + +/** + * @brief Get PLL2 N Coefficient + * @rmtoll PLL2DIVR1 DIVN LL_RCC_PLL2_GetN + * @retval A value between 8 and 420 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVN) >> RCC_PLL2DIVR1_DIVN_Pos) + 1UL); +} + +/** + * @brief Get PLL2 M Coefficient + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Get PLL2 P Coefficient + * @rmtoll PLL2DIVR1 DIVP LL_RCC_PLL2_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVP) >> RCC_PLL2DIVR1_DIVP_Pos) + 1UL); +} + +/** + * @brief Get PLL2 Q Coefficient + * @rmtoll PLL2DIVR1 DIVQ LL_RCC_PLL2_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVQ) >> RCC_PLL2DIVR1_DIVQ_Pos) + 1UL); +} + +/** + * @brief Get PLL2 R Coefficient + * @rmtoll PLL2DIVR1 DIVR LL_RCC_PLL2_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVR) >> RCC_PLL2DIVR1_DIVR_Pos) + 1UL); +} + +/** + * @brief Get PLL2 S Coefficient + * @rmtoll PLL2DIVR2 DIVS LL_RCC_PLL2_GetS + * @retval A value between 1 and 8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetS(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR2, RCC_PLL2DIVR2_DIVS) >> RCC_PLL2DIVR2_DIVS_Pos) + 1UL); +} + +/** + * @brief Get PLL2 T Coefficient + * @rmtoll PLL2DIVR2 DIVT LL_RCC_PLL2_GetT + * @retval A value between 1 and 8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetT(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR2, RCC_PLL2DIVR2_DIVT) >> RCC_PLL2DIVR2_DIVT_Pos) + 1UL); +} + +/** + * @brief Get PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN LL_RCC_PLL2_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN) >> RCC_PLL2FRACR_FRACN_Pos); +} + +/** + * @brief Set PLL2 N Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR1 DIVN LL_RCC_PLL2_SetN + * @param N parameter can be a value between 8 and 420 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVN, (N - 1UL) << RCC_PLL2DIVR1_DIVN_Pos); +} + +/** + * @brief Set PLL2 M Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_SetM + * @param M parameter can be a value between 1 and 64 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2, M << RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Set PLL2 P Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR1 DIVP LL_RCC_PLL2_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVP, (P - 1UL) << RCC_PLL2DIVR1_DIVP_Pos); +} + +/** + * @brief Set PLL2 Q Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR1 DIVQ LL_RCC_PLL2_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVQ, (Q - 1UL) << RCC_PLL2DIVR1_DIVQ_Pos); +} + +/** + * @brief Set PLL2 R Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR1 DIVR LL_RCC_PLL2_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL2DIVR1, RCC_PLL2DIVR1_DIVR, (R - 1UL) << RCC_PLL2DIVR1_DIVR_Pos); +} + +/** + * @brief Set PLL2 S Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR2 DIVS LL_RCC_PLL2_SetS + * @param S parameter can be a value between 1 and 8 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetS(uint32_t S) +{ + MODIFY_REG(RCC->PLL2DIVR2, RCC_PLL2DIVR2_DIVS, (S - 1UL) << RCC_PLL2DIVR2_DIVS_Pos); +} + +/** + * @brief Set PLL2 T Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR2 DIVT LL_RCC_PLL2_SetT + * @param T parameter can be a value between 1 and 8 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetT(uint32_t T) +{ + MODIFY_REG(RCC->PLL2DIVR2, RCC_PLL2DIVR2_DIVT, (T - 1UL) << RCC_PLL2DIVR2_DIVT_Pos); +} + +/** + * @brief Set PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN LL_RCC_PLL2_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL2_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN, FRACN << RCC_PLL2FRACR_FRACN_Pos); +} + +/** + * @brief Enable Spread Spectrum for PLL2. + * @note Configuration to be done with LL_RCC_PLL2_ConfigSpreadSpectrum + * @rmtoll PLLCFGR PLL2SSCGEN LL_RCC_PLL2_EnableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_EnableSpreadSpectrum(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SSCGEN); +} + +/** + * @brief Disable Spread Spectrum for PLL2. + * @rmtoll PLLCFGR PLL2SSCGEN LL_RCC_PLL2_DisableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_DisableSpreadSpectrum(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SSCGEN); +} + +/** + * @brief Check if Spread Spectrum for PLL2 is enabled + * @rmtoll PLLCFGR PLL2SSCGEN LL_RCC_PLL2_IsEnabledSpreadSpectrum + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledSpreadSpectrum(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2SSCGEN) == RCC_PLLCFGR_PLL2SSCGEN) ? 1UL : 0UL); +} + +/** + * @brief Get Spread Spectrum Modulation Period for PLL2 + * @rmtoll PLL2SSCGR MODPER LL_RCC_PLL2_GetModulationPeriod + * @retval Between Min_Data=0 and Max_Data=8191 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetModulationPeriod(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2SSCGR, RCC_PLL2SSCGR_MODPER)); +} + +/** + * @brief Get Spread Spectrum Increment Step for PLL2 + * @rmtoll PLL2SSCGR INCSTEP LL_RCC_PLL2_GetIncrementStep + * @retval Between Min_Data=0 and Max_Data=32767 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetIncrementStep(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2SSCGR, RCC_PLL2SSCGR_INCSTEP) >> RCC_PLL2SSCGR_INCSTEP_Pos); +} + +/** + * @brief Get Spread Spectrum Selection for PLL2 + * @rmtoll PLL2SSCGR SPREADSEL LL_RCC_PLL2_GetSpreadSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_SPREAD_CENTER + * @arg @ref LL_RCC_PLL_SPREAD_DOWN + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetSpreadSelection(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2SSCGR, RCC_PLL2SSCGR_SPREADSEL)); +} + + +/** + * @brief Check if Dithering RPDF Noise for PLL2 is enabled + * @rmtoll PLL2SSCGR RPDFNDIS LL_RCC_PLL2_IsEnabledRPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledRPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL2SSCGR, RCC_PLL2SSCGR_RPDFNDIS) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Check if Dithering TPDF Noise for PLL2 is enabled + * @rmtoll PLL2SSCGR TPDFNDIS LL_RCC_PLL2_IsEnabledTPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsEnabledTPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL2SSCGR, RCC_PLL2SSCGR_TPDFNDIS) == 0U) ? 1UL : 0UL); +} +/** + * @brief Enable PLL3 + * @rmtoll CR PLL3ON LL_RCC_PLL3_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Disable PLL3 + * @note Cannot be disabled if the PLL3 clock is used as the system clock + * @rmtoll CR PLL3ON LL_RCC_PLL3_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Check if PLL3 Ready + * @rmtoll CR PLL3RDY LL_RCC_PLL3_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL3RDY) == RCC_CR_PLL3RDY) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3PEN LL_RCC_PLL3P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3PEN); +} + +/** + * @brief Enable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3QEN LL_RCC_PLL3Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3QEN); +} + +/** + * @brief Enable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3REN LL_RCC_PLL3R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3REN); +} + +/** + * @brief Enable PLL3S + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3SEN LL_RCC_PLL3S_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3S_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SEN); +} + +/** + * @brief Enable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Check if PLL3 P is enabled + * @rmtoll PLLCFGR PLL3PEN LL_RCC_PLL3P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3PEN) == RCC_PLLCFGR_PLL3PEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 Q is enabled + * @rmtoll PLLCFGR PLL3QEN LL_RCC_PLL3Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3QEN) == RCC_PLLCFGR_PLL3QEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 R is enabled + * @rmtoll PLLCFGR PLL3REN LL_RCC_PLL3R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3REN) == RCC_PLLCFGR_PLL3REN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 S is enabled + * @rmtoll PLLCFGR PLL3SEN LL_RCC_PLL3S_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3S_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SEN) == RCC_PLLCFGR_PLL3SEN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 FRACN is enabled + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) == RCC_PLLCFGR_PLL3FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3PEN LL_RCC_PLL3P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3PEN); +} + +/** + * @brief Disable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3QEN LL_RCC_PLL3Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3QEN); +} + +/** + * @brief Disable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3REN LL_RCC_PLL3R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3REN); +} + +/** + * @brief Disable PLL3S + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3SEN LL_RCC_PLL3S_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3S_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SEN); +} + +/** + * @brief Disable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Get PLL3 VCO Input Range + * @rmtoll PLLCFGR PLL3RGE LL_RCC_PLL3_GetVCOInputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetVCOInputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE) >> 22U); +} + +/** + * @brief Get PLL3 VCO OutputRange + * @rmtoll PLLCFGR PLL3VCOSEL LL_RCC_PLL3_GetVCOOutputRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetVCOOutputRange(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL) >> 22U); +} + +/** + * @brief Set PLL3 VCO Input Range + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3RGE LL_RCC_PLL3_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, (InputRange << 22U)); +} + +/** + * @brief Set PLL3 VCO OutputRange + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3VCOSEL LL_RCC_PLL3_SetVCOOutputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, (VCORange << 22U)); +} + +/** + * @brief Get PLL3 N Coefficient + * @rmtoll PLL3DIVR1 DIVN LL_RCC_PLL3_GetN + * @retval A value between 8 and 420 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVN) >> RCC_PLL3DIVR1_DIVN_Pos) + 1UL); +} + +/** + * @brief Get PLL3 M Coefficient + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Get PLL3 P Coefficient + * @rmtoll PLL3DIVR1 DIVP LL_RCC_PLL3_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVP) >> RCC_PLL3DIVR1_DIVP_Pos) + 1UL); +} + +/** + * @brief Get PLL3 Q Coefficient + * @rmtoll PLL3DIVR1 DIVQ LL_RCC_PLL3_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVQ) >> RCC_PLL3DIVR1_DIVQ_Pos) + 1UL); +} + +/** + * @brief Get PLL3 R Coefficient + * @rmtoll PLL3DIVR1 DIVR LL_RCC_PLL3_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVR) >> RCC_PLL3DIVR1_DIVR_Pos) + 1UL); +} + +/** + * @brief Get PLL3 S Coefficient + * @rmtoll PLL3DIVR2 DIVS LL_RCC_PLL3_GetS + * @retval A value between 1 and 8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetS(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR2, RCC_PLL3DIVR2_DIVS) >> RCC_PLL3DIVR2_DIVS_Pos) + 1UL); +} + +/** + * @brief Get PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN LL_RCC_PLL3_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN) >> RCC_PLL3FRACR_FRACN_Pos); +} + +/** + * @brief Set PLL3 N Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR1 DIVN LL_RCC_PLL3_SetN + * @param N parameter can be a value between 8 and 420 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVN, (N - 1UL) << RCC_PLL3DIVR1_DIVN_Pos); +} + +/** + * @brief Set PLL3 M Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_SetM + * @param M parameter can be a value between 1 and 64 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3, M << RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Set PLL3 P Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR1 DIVP LL_RCC_PLL3_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVP, (P - 1UL) << RCC_PLL3DIVR1_DIVP_Pos); +} + +/** + * @brief Set PLL3 Q Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR1 DIVQ LL_RCC_PLL3_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVQ, (Q - 1UL) << RCC_PLL3DIVR1_DIVQ_Pos); +} + +/** + * @brief Set PLL3 R Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR1 DIVR LL_RCC_PLL3_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL3DIVR1, RCC_PLL3DIVR1_DIVR, (R - 1UL) << RCC_PLL3DIVR1_DIVR_Pos); +} + +/** + * @brief Set PLL3 S Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR2 DIVS LL_RCC_PLL3_SetS + * @param S parameter can be a value between 1 and 8 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetS(uint32_t S) +{ + MODIFY_REG(RCC->PLL3DIVR2, RCC_PLL3DIVR2_DIVS, (S - 1UL) << RCC_PLL3DIVR2_DIVS_Pos); +} + +/** + * @brief Set PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN LL_RCC_PLL3_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL3_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN, FRACN << RCC_PLL3FRACR_FRACN_Pos); +} + + +/** + * @brief Enable Spread Spectrum for PLL3. + * @note Configuration to be done with LL_RCC_PLL3_ConfigSpreadSpectrum + * @rmtoll PLLCFGR PLL3SSCGEN LL_RCC_PLL3_EnableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_EnableSpreadSpectrum(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SSCGEN); +} + +/** + * @brief Disable Spread Spectrum for PLL3. + * @rmtoll PLLCFGR PLL3SSCGEN LL_RCC_PLL3_DisableSpreadSpectrum + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_DisableSpreadSpectrum(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SSCGEN); +} + +/** + * @brief Check if Spread Spectrum for PLL3 is enabled + * @rmtoll PLLCFGR PLL3SSCGEN LL_RCC_PLL3_IsEnabledSpreadSpectrum + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledSpreadSpectrum(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3SSCGEN) == RCC_PLLCFGR_PLL3SSCGEN) ? 1UL : 0UL); +} + +/** + * @brief Get Spread Spectrum Modulation Period for PLL3 + * @rmtoll PLL3SSCGR MODPER LL_RCC_PLL3_GetModulationPeriod + * @retval Between Min_Data=0 and Max_Data=8191 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetModulationPeriod(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3SSCGR, RCC_PLL3SSCGR_MODPER)); +} + +/** + * @brief Get Spread Spectrum Increment Step for PLL3 + * @rmtoll PLL3SSCGR INCSTEP LL_RCC_PLL3_GetIncrementStep + * @retval Between Min_Data=0 and Max_Data=32767 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetIncrementStep(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3SSCGR, RCC_PLL3SSCGR_INCSTEP) >> RCC_PLL3SSCGR_INCSTEP_Pos); +} + +/** + * @brief Get Spread Spectrum Selection for PLL3 + * @rmtoll PLL3SSCGR SPREADSEL LL_RCC_PLL3_GetSpreadSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLL_SPREAD_CENTER + * @arg @ref LL_RCC_PLL_SPREAD_DOWN + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetSpreadSelection(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3SSCGR, RCC_PLL3SSCGR_SPREADSEL)); +} + + +/** + * @brief Check if Dithering RPDF Noise for PLL3 is enabled + * @rmtoll PLL3SSCGR RPDFNDIS LL_RCC_PLL3_IsEnabledRPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledRPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL3SSCGR, RCC_PLL3SSCGR_RPDFNDIS) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Check if Dithering TPDF Noise for PLL3 is enabled + * @rmtoll PLL3SSCGR TPDFNDIS LL_RCC_PLL3_IsEnabledTPDFNDithering + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsEnabledTPDFNDithering(void) +{ + return ((READ_BIT(RCC->PLL3SSCGR, RCC_PLL3SSCGR_TPDFNDIS) == 0U) ? 1UL : 0UL); +} +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear CSI ready interrupt flag + * @rmtoll CICR CSIRDYC LL_RCC_ClearFlag_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_CSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSIRDYC); +} + +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} + +/** + * @brief Clear PLL1 ready interrupt flag + * @rmtoll CICR PLL1RDYC LL_RCC_ClearFlag_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL1RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL1RDYC); +} + +/** + * @brief Clear PLL2 ready interrupt flag + * @rmtoll CICR PLL2RDYC LL_RCC_ClearFlag_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL2RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL2RDYC); +} + +/** + * @brief Clear PLL3 ready interrupt flag + * @rmtoll CICR PLL3RDYC LL_RCC_ClearFlag_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL3RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL3RDYC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Clear HSE Clock security system interrupt flag + * @rmtoll CICR HSECSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == RCC_CIFR_LSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == RCC_CIFR_LSERDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == RCC_CIFR_HSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == RCC_CIFR_HSERDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if CSI ready interrupt occurred or not + * @rmtoll CIFR CSIRDYF LL_RCC_IsActiveFlag_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSIRDYF) == RCC_CIFR_CSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIFR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == RCC_CIFR_HSI48RDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 ready interrupt occurred or not + * @rmtoll CIFR PLL1RDYF LL_RCC_IsActiveFlag_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL1RDYF) == RCC_CIFR_PLL1RDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 ready interrupt occurred or not + * @rmtoll CIFR PLL2RDYF LL_RCC_IsActiveFlag_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL2RDYF) == RCC_CIFR_PLL2RDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 ready interrupt occurred or not + * @rmtoll CIFR PLL3RDYF LL_RCC_IsActiveFlag_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL3RDYF) == RCC_CIFR_PLL3RDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == RCC_CIFR_LSECSSF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE Clock security system interrupt occurred or not + * @rmtoll CIFR HSECSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSECSSF) == RCC_CIFR_HSECSSF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWRRSTF) == RCC_RSR_LPWRRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll RSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_WWDGRSTF) == RCC_RSR_WWDGRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll RSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_IWDGRSTF) == RCC_RSR_IWDGRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll RSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_SFTRSTF) == RCC_RSR_SFTRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PORRSTF) == RCC_RSR_PORRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PINRSTF) == RCC_RSR_PINRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear all reset flags. + * @rmtoll RSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_EnableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_CSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Enable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_EnableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL1RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Enable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_EnableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL2RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Enable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_EnableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL3RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Enable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_DisableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_CSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Disable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_DisableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL1RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Disable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_DisableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL2RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Disable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_DisableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL3RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Disable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnableIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == RCC_CIER_LSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnableIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == RCC_CIER_LSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnableIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == RCC_CIER_HSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnableIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == RCC_CIER_HSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if CSI ready interrupt source is enabled or disabled. + * @rmtoll CIER CSIRDYIE LL_RCC_IsEnableIT_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_CSIRDYIE) == RCC_CIER_CSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnableIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == RCC_CIER_HSI48RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL1 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL1RDYIE LL_RCC_IsEnableIT_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE) == RCC_CIER_PLL1RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL2 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL2RDYIE LL_RCC_IsEnableIT_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE) == RCC_CIER_PLL2RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL3 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL3RDYIE LL_RCC_IsEnableIT_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE) == RCC_CIER_PLL3RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSECSS interrupt source is enabled or disabled. + * @rmtoll CIER LSECSSIE LL_RCC_IsEnableIT_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSECSS(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == RCC_CIER_LSECSSIE) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_CALC_FREQ Calculate frequencies + * @{ + */ +/** + * @brief Helper function to calculate the PLL frequency output + * @note ex: @ref LL_RCC_CalcPLLClockFreq (HSE_VALUE, @ref LL_RCC_PLL1_GetM (), + * @ref LL_RCC_PLL1_GetN (), @ref LL_RCC_PLL1_GetFRACN (), @ref LL_RCC_PLL1_GetP ()); + * @param PLLInputFreq PLL Input frequency (based on HSE/(HSI/HSIDIV)/CSI) + * @param M Between 1 and 63 + * @param N Between 4 and 512 + * @param FRACN Between 0 and 0x1FFF + * @param PQR VCO output divider (P, Q or R) + * Between 1 and 128, except for PLL1P Odd value not allowed + * @retval PLL1 clock frequency (in Hz) + */ +__STATIC_INLINE uint32_t LL_RCC_CalcPLLClockFreq(uint32_t PLLInputFreq, uint32_t M, uint32_t N, uint32_t FRACN, + uint32_t PQR) +{ + float_t freq; + + freq = ((float_t)PLLInputFreq / (float_t)M) * ((float_t)N + ((float_t)FRACN / (float_t)0x2000)); + + freq = freq / (float_t)PQR; + + return (uint32_t)freq; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +void LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetPLL1ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL2ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL3ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); + +void LL_RCC_PLL1_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig); +void LL_RCC_PLL2_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig); +void LL_RCC_PLL3_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig); + +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetADFClockFreq(uint32_t ADFxSource); +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +uint32_t LL_RCC_GetCLKPClockFreq(uint32_t CLKPxSource); +uint32_t LL_RCC_GetETHPHYClockFreq(uint32_t ETHxSource); +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +uint32_t LL_RCC_GetFMCClockFreq(uint32_t FMCxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +uint32_t LL_RCC_GetI3CClockFreq(uint32_t I3CxSource); +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +uint32_t LL_RCC_GetXSPIClockFreq(uint32_t XSPIxSource); +uint32_t LL_RCC_GetPSSIClockFreq(uint32_t PSSIxSource); +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource); +uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource); +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource); +uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetUSBPHYCClockFreq(uint32_t USBPHYCxSource); + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_RCC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rng.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rng.h new file mode 100644 index 000000000..13e9b8e8c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rng.h @@ -0,0 +1,724 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rng.h + * @author MCD Application Team + * @brief Header file of RNG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_RNG_H +#define STM32H7RSxx_LL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG_LL RNG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_ES_Init_Struct RNG Exported Init structures + * @{ + */ + + +/** + * @brief LL RNG Init Structure Definition + */ +typedef struct +{ + uint32_t ClockErrorDetection; /*!< Clock error detection. + This parameter can be one value of @ref RNG_LL_CED. + This parameter can be modified using unitary + functions @ref LL_RNG_EnableClkErrorDetect(). */ +} LL_RNG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_LL_CED Clock Error Detection + * @{ + */ +#define LL_RNG_CED_ENABLE 0x00000000U /*!< Clock error detection enabled */ +#define LL_RNG_CED_DISABLE RNG_CR_CED /*!< Clock error detection disabled */ +/** + * @} + */ +/** @defgroup RNG_LL_ARDIS Auto reset disable + * @{ + */ +#define LL_RNG_ARDIS_ENABLE 0x00000000U /*!< ARDIS enabled automatic reset to clear SECS bit*/ +#define LL_RNG_ARDIS_DISABLE RNG_CR_ARDIS /*!< ARDIS disabled no automatic reset to clear SECS bit*/ +/** + * @} + */ + +/** @defgroup RNG_LL_Clock_Divider_Factor Value used to configure an internal + * programmable divider acting on the incoming RNG clock + * @{ + */ +#define LL_RNG_CLKDIV_BY_1 (0x00000000UL) /*!< No clock division */ +#define LL_RNG_CLKDIV_BY_2 (RNG_CR_CLKDIV_0) /*!< 2 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_4 (RNG_CR_CLKDIV_1) /*!< 4 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_8 (RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) /*!< 8 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_16 (RNG_CR_CLKDIV_2) /*!< 16 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_32 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0) /*!< 32 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_64 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1) /*!< 64 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_128 (RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) /*!< 128 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_256 (RNG_CR_CLKDIV_3) /*!< 256 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_512 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_0) /*!< 512 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_1024 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1) /*!< 1024 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_2048 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) /*!< 2048 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_4096 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2) /*!< 4096 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_8192 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_0) /*!< 8192 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_16384 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1) /*!< 16384 RNG clock cycles per internal RNG clock */ +#define LL_RNG_CLKDIV_BY_32768 (RNG_CR_CLKDIV_3 | RNG_CR_CLKDIV_2 | RNG_CR_CLKDIV_1 | RNG_CR_CLKDIV_0) /*!< 32768 RNG clock cycles per internal RNG clock */ +/** + * @} + */ + +/** @defgroup RNG_LL_NIST_Compliance NIST Compliance configuration + * @{ + */ +#define LL_RNG_NIST_COMPLIANT (0x00000000UL) /*!< Default NIST compliant configuration*/ +#define LL_RNG_CUSTOM_NIST (RNG_CR_NISTC) /*!< Custom NIST configuration */ + +/** + * @} + */ + +/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RNG_ReadReg function + * @{ + */ +#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */ +#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */ +#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */ +#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */ +#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */ +/** + * @} + */ + +/** @defgroup RNG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros + * @{ + */ +#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions + * @{ + */ +/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions + * @{ + */ + +/** + * @brief Enable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Enable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Disable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Disable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Check if Random Number Generator is enabled + * @rmtoll CR RNGEN LL_RNG_IsEnabled + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabled(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Clock Error Detection + * @rmtoll CR CED LL_RNG_EnableClkErrorDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableClkErrorDetect(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_CED); +} + +/** + * @brief Disable RNG Clock Error Detection + * @rmtoll CR CED LL_RNG_DisableClkErrorDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableClkErrorDetect(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_CED); +} + +/** + * @brief Check if RNG Clock Error Detection is enabled + * @rmtoll CR CED LL_RNG_IsEnabledClkErrorDetect + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledClkErrorDetect(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_CED) != (RNG_CR_CED)) ? 1UL : 0UL); +} + +/** + * @brief Set RNG Conditioning Soft Reset bit + * @rmtoll CR CONDRST LL_RNG_EnableCondReset + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableCondReset(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Reset RNG Conditioning Soft Reset bit + * @rmtoll CR CONDRST LL_RNG_DisableCondReset + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableCondReset(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Check if RNG Conditioning Soft Reset bit is set + * @rmtoll CR CONDRST LL_RNG_IsEnabledCondReset + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledCondReset(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_CONDRST) == (RNG_CR_CONDRST)) ? 1UL : 0UL); +} + +/** + * @brief Enable RNG Config Lock + * @rmtoll CR CONFIGLOCK LL_RNG_ConfigLock + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ConfigLock(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_CONFIGLOCK); +} + +/** + * @brief Check if RNG Config Lock is enabled + * @rmtoll CR CONFIGLOCK LL_RNG_IsConfigLocked + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsConfigLocked(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_CONFIGLOCK) == (RNG_CR_CONFIGLOCK)) ? 1UL : 0UL); +} + +/** + * @brief Enable NIST Compliance + * @rmtoll CR NISTC LL_RNG_EnableNistCompliance + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableNistCompliance(RNG_TypeDef *RNGx) +{ + MODIFY_REG(RNGx->CR, RNG_CR_NISTC | RNG_CR_CONDRST, LL_RNG_NIST_COMPLIANT | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Disable NIST Compliance + * @rmtoll CR NISTC LL_RNG_DisableNistCompliance + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableNistCompliance(RNG_TypeDef *RNGx) +{ + MODIFY_REG(RNGx->CR, RNG_CR_NISTC | RNG_CR_CONDRST, LL_RNG_CUSTOM_NIST | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST);; +} + +/** + * @brief Check if NIST Compliance is enabled + * @rmtoll CR NISTC LL_RNG_IsEnabledNistCompliance + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledNistCompliance(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_NISTC) != (RNG_CR_NISTC)) ? 1UL : 0UL); +} + +/** + * @brief Set RNG Config1 Configuration field value + * @rmtoll CR RNG_CONFIG1 LL_RNG_SetConfig1 + * @param RNGx RNG Instance + * @param Config1 Value between 0 and 0x3F + * @retval None + */ +__STATIC_INLINE void LL_RNG_SetConfig1(RNG_TypeDef *RNGx, uint32_t Config1) +{ + MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG1 | RNG_CR_CONDRST, (Config1 << RNG_CR_RNG_CONFIG1_Pos) | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Get RNG Config1 Configuration field value + * @rmtoll CR RNG_CONFIG1 LL_RNG_GetConfig1 + * @param RNGx RNG Instance + * @retval Returned Value expressed on 6 bits : Value between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_RNG_GetConfig1(const RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_BIT(RNGx->CR, RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos); +} + +/** + * @brief Set RNG Config2 Configuration field value + * @rmtoll CR RNG_CONFIG2 LL_RNG_SetConfig2 + * @param RNGx RNG Instance + * @param Config2 Value between 0 and 0x7 + * @retval None + */ +__STATIC_INLINE void LL_RNG_SetConfig2(RNG_TypeDef *RNGx, uint32_t Config2) +{ + MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG2 | RNG_CR_CONDRST, (Config2 << RNG_CR_RNG_CONFIG2_Pos) | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Get RNG Config2 Configuration field value + * @rmtoll CR RNG_CONFIG2 LL_RNG_GetConfig2 + * @param RNGx RNG Instance + * @retval Returned Value expressed on 3 bits : Value between 0 and 0x7 + */ +__STATIC_INLINE uint32_t LL_RNG_GetConfig2(const RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_BIT(RNGx->CR, RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos); +} + +/** + * @brief Set RNG Config3 Configuration field value + * @rmtoll CR RNG_CONFIG3 LL_RNG_SetConfig3 + * @param RNGx RNG Instance + * @param Config3 Value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_RNG_SetConfig3(RNG_TypeDef *RNGx, uint32_t Config3) +{ + MODIFY_REG(RNGx->CR, RNG_CR_RNG_CONFIG3 | RNG_CR_CONDRST, (Config3 << RNG_CR_RNG_CONFIG3_Pos) | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Get RNG Config3 Configuration field value + * @rmtoll CR RNG_CONFIG3 LL_RNG_GetConfig3 + * @param RNGx RNG Instance + * @retval Returned Value expressed on 4 bits : Value between 0 and 0xF + */ +__STATIC_INLINE uint32_t LL_RNG_GetConfig3(const RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_BIT(RNGx->CR, RNG_CR_RNG_CONFIG3) >> RNG_CR_RNG_CONFIG3_Pos); +} + +/** + * @brief Set RNG Clock divider factor + * @rmtoll CR CLKDIV LL_RNG_SetClockDivider + * @param RNGx RNG Instance + * @param Divider can be one of the following values: + * @arg @ref LL_RNG_CLKDIV_BY_1 + * @arg @ref LL_RNG_CLKDIV_BY_2 + * @arg @ref LL_RNG_CLKDIV_BY_4 + * @arg @ref LL_RNG_CLKDIV_BY_8 + * @arg @ref LL_RNG_CLKDIV_BY_16 + * @arg @ref LL_RNG_CLKDIV_BY_32 + * @arg @ref LL_RNG_CLKDIV_BY_64 + * @arg @ref LL_RNG_CLKDIV_BY_128 + * @arg @ref LL_RNG_CLKDIV_BY_256 + * @arg @ref LL_RNG_CLKDIV_BY_512 + * @arg @ref LL_RNG_CLKDIV_BY_1024 + * @arg @ref LL_RNG_CLKDIV_BY_2048 + * @arg @ref LL_RNG_CLKDIV_BY_4096 + * @arg @ref LL_RNG_CLKDIV_BY_8192 + * @arg @ref LL_RNG_CLKDIV_BY_16384 + * @arg @ref LL_RNG_CLKDIV_BY_32768 + * @retval None + */ +__STATIC_INLINE void LL_RNG_SetClockDivider(RNG_TypeDef *RNGx, uint32_t Divider) +{ + MODIFY_REG(RNGx->CR, RNG_CR_CLKDIV | RNG_CR_CONDRST, (Divider << RNG_CR_CLKDIV_Pos) | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Get RNG Clock divider factor + * @rmtoll CR CLKDIV LL_RNG_GetClockDivider + * @param RNGx RNG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RNG_CLKDIV_BY_1 + * @arg @ref LL_RNG_CLKDIV_BY_2 + * @arg @ref LL_RNG_CLKDIV_BY_4 + * @arg @ref LL_RNG_CLKDIV_BY_8 + * @arg @ref LL_RNG_CLKDIV_BY_16 + * @arg @ref LL_RNG_CLKDIV_BY_32 + * @arg @ref LL_RNG_CLKDIV_BY_64 + * @arg @ref LL_RNG_CLKDIV_BY_128 + * @arg @ref LL_RNG_CLKDIV_BY_256 + * @arg @ref LL_RNG_CLKDIV_BY_512 + * @arg @ref LL_RNG_CLKDIV_BY_1024 + * @arg @ref LL_RNG_CLKDIV_BY_2048 + * @arg @ref LL_RNG_CLKDIV_BY_4096 + * @arg @ref LL_RNG_CLKDIV_BY_8192 + * @arg @ref LL_RNG_CLKDIV_BY_16384 + * @arg @ref LL_RNG_CLKDIV_BY_32768 + */ +__STATIC_INLINE uint32_t LL_RNG_GetClockDivider(const RNG_TypeDef *RNGx) +{ + return (uint32_t)READ_BIT(RNGx->CR, RNG_CR_CLKDIV); +} +/** + * @} + */ + +/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Indicate if the RNG Data ready Flag is set or not + * @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Current Status Flag is set or not + * @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Current Status Flag is set or not + * @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Interrupt Status Flag is set or not + * @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Interrupt Status Flag is set or not + * @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL); +} + +/** + * @brief Clear Clock Error interrupt Status (CEIS) Flag + * @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_CEIS); +} + +/** + * @brief Clear Seed Error interrupt Status (SEIS) Flag + * @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_SEIS); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_EnableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Disable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_DisableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Check if Random Number Generator Interrupt is enabled + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_IsEnabledIT + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_Data_Management Data Management + * @{ + */ + +/** + * @brief Return32-bit Random Number value + * @rmtoll DR RNDATA LL_RNG_ReadRandData32 + * @param RNGx RNG Instance + * @retval Generated 32-bit random value + */ +__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(const RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_REG(RNGx->DR)); +} + +/** + * @} + */ + +/** + * @brief Enable Auto reset + * @rmtoll CR ARDIS LL_RNG_EnableArdis + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableArdis(RNG_TypeDef *RNGx) +{ + MODIFY_REG(RNGx->CR, RNG_CR_ARDIS | RNG_CR_CONDRST, LL_RNG_ARDIS_ENABLE | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Disable Auto reset + * @rmtoll CR ARDIS LL_RNG_DisableArdis + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableArdis(RNG_TypeDef *RNGx) +{ + MODIFY_REG(RNGx->CR, RNG_CR_ARDIS | RNG_CR_CONDRST, LL_RNG_ARDIS_DISABLE | RNG_CR_CONDRST); + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); +} + +/** + * @brief Check if RNG Auto reset is enabled + * @rmtoll CR ARDIS LL_RNG_IsEnabledArdis + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledArdis(const RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_ARDIS) != (RNG_CR_ARDIS)) ? 1UL : 0UL); +} + +/** @defgroup RNG_LL_EF_Health_Test_Control Health Test Control + * @{ + */ + +/** + * @brief Set RNG Health Test Control + * @rmtoll HTCR HTCFG LL_RNG_SetHealthConfig + * @param RNGx RNG Instance + * @param HTCFG can be values of 32 bits + * @retval None + */ +__STATIC_INLINE void LL_RNG_SetHealthConfig(RNG_TypeDef *RNGx, uint32_t HTCFG) +{ + WRITE_REG(RNGx->HTCR, HTCFG); +} + +/** + * @brief Get RNG Health Test Control + * @rmtoll HTCR HTCFG LL_RNG_GetHealthConfig + * @param RNGx RNG Instance + * @retval Return 32-bit RNG Health Test configuration + */ +__STATIC_INLINE uint32_t LL_RNG_GetHealthConfig(const RNG_TypeDef *RNGx) +{ + return (uint32_t)READ_REG(RNGx->HTCR); +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct); +void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct); +ErrorStatus LL_RNG_DeInit(const RNG_TypeDef *RNGx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7RSxx_LL_RNG_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rtc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rtc.h new file mode 100644 index 000000000..b4fd69c26 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_rtc.h @@ -0,0 +1,6176 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_RTC_H +#define STM32H7RSxx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_LL_INIT_MASK 0xFFFFFFFFU +#define RTC_LL_RSF_MASK 0xFFFFFF5FU + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE (uint8_t)0xFF +#define RTC_WRITE_PROTECTION_ENABLE_1 (uint8_t)0xCA +#define RTC_WRITE_PROTECTION_ENABLE_2 (uint8_t)0x53 + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY 24U +#define RTC_OFFSET_DAY 16U +#define RTC_OFFSET_MONTH 8U +#define RTC_OFFSET_HOUR 16U +#define RTC_OFFSET_MINUTE 8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +#if !defined (UNUSED) +#define UNUSED(x) ((void)(x)) +#endif /* !defined (UNUSED) */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 + if the @ref LL_RTC_TIME_FORMAT_PM is selected. + + This parameter must be a number between Min_Data = 0 and Max_Data = 23 + if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function + @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function + @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function + @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function + @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function + @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function + @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function + @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A or + @ref RTC_LL_EC_ALMB_MASK for ALARM B. + + This feature can be modified afterwards using unitary function + @ref LL_RTC_ALMA_SetMask() for ALARM A or @ref LL_RTC_ALMB_SetMask() for ALARM B. + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION + for ALARM A or @ref RTC_LL_EC_ALMB_WEEKDAY_SELECTION for ALARM B. + + This feature can be modified afterwards using unitary function + @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() for ALARM A + or @ref LL_RTC_ALMB_EnableWeekday() or @ref LL_RTC_ALMB_DisableWeekday() + for ALARM B. + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number + between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function + @ref LL_RTC_ALMA_SetDay() for ALARM A or @ref LL_RTC_ALMB_SetDay() for ALARM B. + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of + @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function + @ref LL_RTC_ALMA_SetWeekDay() for ALARM A or + @ref LL_RTC_ALMB_SetWeekDay() for ALARM B. + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN 0U /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD 1U /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0U /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_WEEKDAY_SELECTION RTC Alarm B Date WeekDay + * @{ + */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_DATE 0U /*!< Alarm B Date is selected */ +#define LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMBR_WDSEL /*!< Alarm B WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#define LL_RTC_SCR_SSRUF RTC_SCR_CSSRUF +#define LL_RTC_SCR_ITSF RTC_SCR_CITSF +#define LL_RTC_SCR_TSOVF RTC_SCR_CTSOVF +#define LL_RTC_SCR_TSF RTC_SCR_CTSF +#define LL_RTC_SCR_WUTF RTC_SCR_CWUTF +#define LL_RTC_SCR_ALRBF RTC_SCR_CALRBF +#define LL_RTC_SCR_ALRAF RTC_SCR_CALRAF + +#define LL_RTC_ICSR_RECALPF RTC_ICSR_RECALPF +#define LL_RTC_ICSR_BCDU_2 RTC_ICSR_BCDU_2 +#define LL_RTC_ICSR_BCDU_1 RTC_ICSR_BCDU_1 +#define LL_RTC_ICSR_BCDU_0 RTC_ICSR_BCDU_0 +#define LL_RTC_ICSR_BIN_1 RTC_ICSR_BIN_1 +#define LL_RTC_ICSR_BIN_0 RTC_ICSR_BIN_0 +#define LL_RTC_ICSR_INITF RTC_ICSR_INITF +#define LL_RTC_ICSR_RSF RTC_ICSR_RSF +#define LL_RTC_ICSR_INITS RTC_ICSR_INITS +#define LL_RTC_ICSR_SHPF RTC_ICSR_SHPF +#define LL_RTC_ICSR_WUTWF RTC_ICSR_WUTWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_WUTIE RTC_CR_WUTIE +#define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY (uint8_t)0x01 /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY (uint8_t)0x02 /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY (uint8_t)0x03 /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY (uint8_t)0x04 /*!< Thrusday */ +#define LL_RTC_WEEKDAY_FRIDAY (uint8_t)0x05 /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY (uint8_t)0x06 /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY (uint8_t)0x07 /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY (uint8_t)0x01 /*!< January */ +#define LL_RTC_MONTH_FEBRUARY (uint8_t)0x02 /*!< February */ +#define LL_RTC_MONTH_MARCH (uint8_t)0x03 /*!< March */ +#define LL_RTC_MONTH_APRIL (uint8_t)0x04 /*!< April */ +#define LL_RTC_MONTH_MAY (uint8_t)0x05 /*!< May */ +#define LL_RTC_MONTH_JUNE (uint8_t)0x06 /*!< June */ +#define LL_RTC_MONTH_JULY (uint8_t)0x07 /*!< July */ +#define LL_RTC_MONTH_AUGUST (uint8_t)0x08 /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER (uint8_t)0x09 /*!< September */ +#define LL_RTC_MONTH_OCTOBER (uint8_t)0x10 /*!< October */ +#define LL_RTC_MONTH_NOVEMBER (uint8_t)0x11 /*!< November */ +#define LL_RTC_MONTH_DECEMBER (uint8_t)0x12 /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR 0U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +#if defined(RTC_CR_OSEL) +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE 0U /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ +#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ +/** + * @} + */ +#endif /* RTC_CR_OSEL */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL 0U /*!< RTC_ALARM is push-pull output */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE /*!< RTC_ALARM is open-drain output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 0U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY 0U /*!< Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /*!< Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE 0U /*!< No masks applied on Alarm A */ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM 0U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_SUBSECONDBIN_AUTOCLR RTC Alarm Sub Seconds with binary mode auto clear Definitions + * @{ + */ +#define LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_NO 0UL +/*!< The synchronous binary counter (SS[31:0] in RTC_SSR) is free-running. */ + +#define LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_YES RTC_ALRMASSR_SSCLR +/*!< The synchronous binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFF FFFF to RTC_ALRMABINR -> SS[31:0] + value and is automatically reloaded with 0xFFFF FFFF when reaching RTC_ALRMABINR -> SS[31:0]. */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_MASK ALARMB MASK + * @{ + */ +#define LL_RTC_ALMB_MASK_NONE 0U /*!< No masks applied on Alarm B */ +#define LL_RTC_ALMB_MASK_DATEWEEKDAY RTC_ALRMBR_MSK4 /*!< Date/day do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_HOURS RTC_ALRMBR_MSK3 /*!< Hours do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_MINUTES RTC_ALRMBR_MSK2 /*!< Minutes do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_SECONDS RTC_ALRMBR_MSK1 /*!< Seconds do not care in Alarm B comparison */ +#define LL_RTC_ALMB_MASK_ALL (RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_TIME_FORMAT ALARMB TIME FORMAT + * @{ + */ +#define LL_RTC_ALMB_TIME_FORMAT_AM 0U /*!< AM or 24-hour format */ +#define LL_RTC_ALMB_TIME_FORMAT_PM RTC_ALRMBR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMB_SUBSECONDBIN_AUTOCLR Alarm Sub Seconds with binary mode auto clear Definitions + * @{ + */ +#define LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_NO 0UL +/*!< The synchronous binary counter (SS[31:0] in RTC_SSR) is free-running. */ + +#define LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_YES RTC_ALRMBSSR_SSCLR +/*!< The synchronous binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFF FFFF to RTC_ALRMBBINR -> SS[31:0] + value and is automatically reloaded with 0xFFFF FFFF when reaching RTC_ALRMBBINR -> SS[31:0]. */ +/** + * @} + */ + +#if defined(RTC_CR_TSEDGE) +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING 0U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ +/** + * @} + */ +#endif /* RTC_CR_TSEDGE */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM 0U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER TAMPER + * @{ + */ +#define LL_RTC_TAMPER_1 TAMP_CR1_TAMP1E /*!< Tamper 1 input detection */ +#define LL_RTC_TAMPER_2 TAMP_CR1_TAMP2E /*!< Tamper 2 input detection */ +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_3 TAMP_CR1_TAMP3E /*!< Tamper 3 input detection */ +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_3 TAMP_CR1_TAMP3E /*!< Tamper 3 input detection */ +#define LL_RTC_TAMPER_4 TAMP_CR1_TAMP4E /*!< Tamper 4 input detection */ +#define LL_RTC_TAMPER_5 TAMP_CR1_TAMP5E /*!< Tamper 5 input detection */ +#define LL_RTC_TAMPER_6 TAMP_CR1_TAMP6E /*!< Tamper 6 input detection */ +#define LL_RTC_TAMPER_7 TAMP_CR1_TAMP7E /*!< Tamper 7 input detection */ +#define LL_RTC_TAMPER_8 TAMP_CR1_TAMP8E /*!< Tamper 8 input detection */ +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK + * @{ + */ +#define LL_RTC_TAMPER_MASK_TAMPER1 TAMP_CR2_TAMP1MSK /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware. The backup registers are not erased */ +#define LL_RTC_TAMPER_MASK_TAMPER2 TAMP_CR2_TAMP2MSK /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased */ +#if (RTC_TAMP_NB > 2U) +#define LL_RTC_TAMPER_MASK_TAMPER3 TAMP_CR2_TAMP3MSK /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased */ +#endif /* (RTC_TAMP_NB > 2U) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE + * @{ + */ +#define LL_RTC_TAMPER_NOERASE_TAMPER1 TAMP_CR2_TAMP1POM /*!< Tamper 1 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER2 TAMP_CR2_TAMP2POM /*!< Tamper 2 event does not erase the backup registers */ +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_NOERASE_TAMPER3 TAMP_CR2_TAMP3POM /*!< Tamper 3 event does not erase the backup registers */ +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_NOERASE_TAMPER3 TAMP_CR2_TAMP3POM /*!< Tamper 3 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER4 TAMP_CR2_TAMP4POM /*!< Tamper 4 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER5 TAMP_CR2_TAMP5POM /*!< Tamper 5 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER6 TAMP_CR2_TAMP6POM /*!< Tamper 6 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER7 TAMP_CR2_TAMP7POM /*!< Tamper 7 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_TAMPER8 TAMP_CR2_TAMP8POM /*!< Tamper 8 event does not erase the backup registers */ +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION + * @{ + */ +#define LL_RTC_TAMPER_DURATION_1RTCCLK 0U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define LL_RTC_TAMPER_DURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_8RTCCLK TAMP_FLTCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER + * @{ + */ +#define LL_RTC_TAMPER_FILTER_DISABLE 0U /*!< Tamper filter is disabled */ +#define LL_RTC_TAMPER_FILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER + * @{ + */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (TAMP_FLTCR_TAMPFREQ_2 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_256 TAMP_FLTCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL + * @{ + */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 TAMP_CR2_TAMP1TRG /*!< Tamper 1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 TAMP_CR2_TAMP2TRG /*!< Tamper 2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 TAMP_CR2_TAMP3TRG /*!< Tamper 3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 TAMP_CR2_TAMP3TRG /*!< Tamper 3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP4 TAMP_CR2_TAMP4TRG /*!< Tamper 4 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP5 TAMP_CR2_TAMP5TRG /*!< Tamper 5 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP6 TAMP_CR2_TAMP6TRG /*!< Tamper 6 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP7 TAMP_CR2_TAMP7TRG /*!< Tamper 7 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP8 TAMP_CR2_TAMP8TRG /*!< Tamper 8 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_INTERNAL INTERNAL TAMPER + * @{ + */ +#define LL_RTC_TAMPER_ITAMP1 TAMP_CR1_ITAMP1E /*!< Internal tamper 1: Backup Domain voltage threshold monitoring */ +#define LL_RTC_TAMPER_ITAMP2 TAMP_CR1_ITAMP2E /*!< Internal tamper 2: Temperature monitoring */ +#define LL_RTC_TAMPER_ITAMP3 TAMP_CR1_ITAMP3E /*!< Internal tamper 3: LSE monitoring */ +#define LL_RTC_TAMPER_ITAMP4 TAMP_CR1_ITAMP4E /*!< Internal tamper 4: HSE monitoring */ +#define LL_RTC_TAMPER_ITAMP5 TAMP_CR1_ITAMP5E /*!< Internal tamper 5: RTC calendar overflow */ +#define LL_RTC_TAMPER_ITAMP6 TAMP_CR1_ITAMP6E /*!< Internal tamper 6: JTAG/SWD access when RDP > 0 */ +#define LL_RTC_TAMPER_ITAMP7 TAMP_CR1_ITAMP7E /*!< Internal tamper 7: ADC2 watchdog monitoring 1 */ +#define LL_RTC_TAMPER_ITAMP8 TAMP_CR1_ITAMP8E /*!< Internal tamper 8: Monotonic counter 1 overflow */ +#define LL_RTC_TAMPER_ITAMP9 TAMP_CR1_ITAMP9E /*!< Internal tamper 9: Cryptographic IPs fault */ +#define LL_RTC_TAMPER_ITAMP11 TAMP_CR1_ITAMP11E /*!< Internal tamper 11: IWDG reset when tamper flag is set */ +#define LL_RTC_TAMPER_ITAMP15 TAMP_CR1_ITAMP15E /*!< Internal tamper 15: System fault detection */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ITAMPER_NOERASE INTERNAL TAMPER NO ERASE + * @{ + */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER1 TAMP_CR3_ITAMP1POM /*!< Internal tamper 1 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER2 TAMP_CR3_ITAMP2POM /*!< Internal tamper 2 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER3 TAMP_CR3_ITAMP3POM /*!< Internal tamper 3 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER4 TAMP_CR3_ITAMP4POM /*!< Internal tamper 4 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER5 TAMP_CR3_ITAMP5POM /*!< Internal tamper 5 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER6 TAMP_CR3_ITAMP6POM /*!< Internal tamper 6 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER7 TAMP_CR3_ITAMP7POM /*!< Internal tamper 7 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER8 TAMP_CR3_ITAMP8POM /*!< Internal tamper 8 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER9 TAMP_CR3_ITAMP9POM /*!< Internal tamper 9 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER11 TAMP_CR3_ITAMP11POM /*!< Internal tamper 11 event does not erase the backup registers */ +#define LL_RTC_TAMPER_NOERASE_ITAMPER15 TAMP_CR3_ITAMP15POM /*!< Internal tamper 15 event does not erase the backup registers */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ACTIVE_MODE ACTIVE TAMPER MODE + * @{ + */ +#define LL_RTC_TAMPER_ATAMP_TAMP1AM TAMP_ATCR1_TAMP1AM /*!< Tamper 1 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP2AM TAMP_ATCR1_TAMP2AM /*!< Tamper 2 is active */ +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_ATAMP_TAMP3AM TAMP_ATCR1_TAMP3AM /*!< Tamper 3 is active */ +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ATAMP_TAMP3AM TAMP_ATCR1_TAMP3AM /*!< Tamper 3 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP4AM TAMP_ATCR1_TAMP4AM /*!< Tamper 4 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP5AM TAMP_ATCR1_TAMP5AM /*!< Tamper 5 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP6AM TAMP_ATCR1_TAMP6AM /*!< Tamper 6 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP7AM TAMP_ATCR1_TAMP7AM /*!< Tamper 7 is active */ +#define LL_RTC_TAMPER_ATAMP_TAMP8AM TAMP_ATCR1_TAMP8AM /*!< Tamper 8 is active */ +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ACTIVE_ASYNC_PRESCALER ACTIVE TAMPER ASYNCHRONOUS PRESCALER CLOCK + * @{ + */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK 0U /*!< RTCCLK */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_2 TAMP_ATCR1_ATCKSEL_0 /*!< RTCCLK/2 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_4 TAMP_ATCR1_ATCKSEL_1 /*!< RTCCLK/4 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_8 (TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/8 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_16 TAMP_ATCR1_ATCKSEL_2 /*!< RTCCLK/16 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_32 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/32 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_64 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1) /*!< RTCCLK/64 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_128 (TAMP_ATCR1_ATCKSEL_2 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/128 */ +#define LL_RTC_TAMPER_ATAMP_ASYNCPRES_RTCCLK_2048 (TAMP_ATCR1_ATCKSEL_3 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_0) /*!< RTCCLK/2048 */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ACTIVE_OUTPUT_SELECTION ACTIVE TAMPER OUTPUT SELECTION + * @{ + */ +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL1_Pos) +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL1_Pos) +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL1_Pos) +#define LL_RTC_TAMPER_ATAMP1IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL1_Pos) +#endif /* RTC_TAMP_NB */ + +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL2_Pos) +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL2_Pos) +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL2_Pos) +#define LL_RTC_TAMPER_ATAMP2IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL2_Pos) +#endif /* RTC_TAMP_NB */ + +#if (RTC_TAMP_NB == 3U) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL3_Pos) +#elif (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL3_Pos) +#define LL_RTC_TAMPER_ATAMP3IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL3_Pos) +#endif /* RTC_TAMP_NB */ + +#if (RTC_TAMP_NB == 8U) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL4_Pos) +#define LL_RTC_TAMPER_ATAMP4IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL4_Pos) + +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL5_Pos) +#define LL_RTC_TAMPER_ATAMP5IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL5_Pos) + +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL6_Pos) +#define LL_RTC_TAMPER_ATAMP6IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL6_Pos) + +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL7_Pos) +#define LL_RTC_TAMPER_ATAMP7IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL7_Pos) + +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP1OUT (0U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP2OUT (1U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP3OUT (2U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP4OUT (3U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP5OUT (4U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP6OUT (5U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP7OUT (6U << TAMP_ATCR2_ATOSEL8_Pos) +#define LL_RTC_TAMPER_ATAMP8IN_ATAMP8OUT (7U << TAMP_ATCR2_ATOSEL8_Pos) +#endif /* RTC_TAMP_NB */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#define LL_RTC_BKP_NUMBER RTC_BACKUP_NB +#define LL_RTC_BKP_DR0 0U +#define LL_RTC_BKP_DR1 1U +#define LL_RTC_BKP_DR2 2U +#define LL_RTC_BKP_DR3 3U +#define LL_RTC_BKP_DR4 4U +#define LL_RTC_BKP_DR5 5U +#define LL_RTC_BKP_DR6 6U +#define LL_RTC_BKP_DR7 7U +#define LL_RTC_BKP_DR8 8U +#define LL_RTC_BKP_DR9 9U +#define LL_RTC_BKP_DR10 10U +#define LL_RTC_BKP_DR11 11U +#define LL_RTC_BKP_DR12 12U +#define LL_RTC_BKP_DR13 13U +#define LL_RTC_BKP_DR14 14U +#define LL_RTC_BKP_DR15 15U +#define LL_RTC_BKP_DR16 16U +#define LL_RTC_BKP_DR17 17U +#define LL_RTC_BKP_DR18 18U +#define LL_RTC_BKP_DR19 19U +#define LL_RTC_BKP_DR20 20U +#define LL_RTC_BKP_DR21 21U +#define LL_RTC_BKP_DR22 22U +#define LL_RTC_BKP_DR23 23U +#define LL_RTC_BKP_DR24 24U +#define LL_RTC_BKP_DR25 25U +#define LL_RTC_BKP_DR26 26U +#define LL_RTC_BKP_DR27 27U +#define LL_RTC_BKP_DR28 28U +#define LL_RTC_BKP_DR29 29U +#define LL_RTC_BKP_DR30 30U +#define LL_RTC_BKP_DR31 31U +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV + * @{ + */ +#define LL_RTC_WAKEUPCLOCK_DIV_16 0U /*!< RTC/16 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_8 RTC_CR_WUCKSEL_0 /*!< RTC/8 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_4 RTC_CR_WUCKSEL_1 /*!< RTC/4 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE RTC_CR_WUCKSEL_2 /*!< ck_spre (usually 1 Hz) clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value */ +/** + * @} + */ + +#if defined(RTC_CR_COE) +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE 0U /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ +#define LL_RTC_CALIB_OUTPUT_512HZ RTC_CR_COE /*!< Calibration output is 512 Hz */ +/** + * @} + */ +#endif /* RTC_CR_COE */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE 0U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC 0U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_LOWPOWER Calibration low power + * @{ + */ +#define LL_RTC_CALIB_LOWPOWER_NONE 0U /*!< High conso mode */ +#define LL_RTC_CALIB_LOWPOWER_SET RTC_CALR_LPCAL /*!< Low power mode */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BINARY_MODE Binary mode (Sub Second Register) + * @{ + */ +#define LL_RTC_BINARY_NONE 0U /*!< Free running BCD calendar mode (Binary mode disabled) */ +#define LL_RTC_BINARY_ONLY RTC_ICSR_BIN_0 /*!< Free running Binary mode (BCD mode disabled) */ +#define LL_RTC_BINARY_MIX RTC_ICSR_BIN_1 /*!< Free running BCD calendar and Binary mode enable */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BINARY_MIX_BCDU Calendar second incrementation in Binary mix mode + * @{ + */ +#define LL_RTC_BINARY_MIX_BCDU_0 0U /*!< 1s calendar increment is generated each time SS[7:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_1 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[8:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_2 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[9:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_3 (0x3UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[10:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_4 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[11:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_5 (0x5UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[12:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_6 (0x6UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[13:0] = 0 */ +#define LL_RTC_BINARY_MIX_BCDU_7 (0x7UL << RTC_ICSR_BCDU_Pos) /*!< 1s calendar increment is generated each time SS[14:0] = 0 */ +/** + * @} + */ +#if defined(RTC_PRIVCFGR_PRIV) +/** @defgroup RTC_LL_EC_PRIVILEGE_RTC_FULL Privilege full rtc + * @{ + */ +#define LL_RTC_PRIVILEGE_FULL_YES RTC_PRIVCFGR_PRIV /*!< RTC full privilege */ +#define LL_RTC_PRIVILEGE_FULL_NO 0U /*!< RTC is not full privilege, features can be unprivilege. See RTC_LL_EC_PRIVILEGE_RTC_FEATURE */ +/** + * @} + */ +#endif /* RTC_PRIVCFGR_PRIV */ + +/** @defgroup RTC_LL_EC_PRIVILEGE_RTC_FEATURE Privilege rtc features in case of LL_RTC_PRIVILEGE_FULL_NO. + * @{ + */ +#define LL_RTC_PRIVILEGE_FEATURE_INIT RTC_PRIVCFGR_INITPRIV /*!< Initialization feature is privilege */ +#define LL_RTC_PRIVILEGE_FEATURE_CAL RTC_PRIVCFGR_CALPRIV /*!< Calibration feature is privilege */ +#define LL_RTC_PRIVILEGE_FEATURE_TS RTC_PRIVCFGR_TSPRIV /*!< Time stamp feature is privilege */ +#define LL_RTC_PRIVILEGE_FEATURE_WUT RTC_PRIVCFGR_WUTPRIV /*!< Wake up timer feature is privilege */ +#define LL_RTC_PRIVILEGE_FEATURE_ALRA RTC_PRIVCFGR_ALRAPRIV /*!< Alarm A feature is privilege */ +#define LL_RTC_PRIVILEGE_FEATURE_ALRB RTC_PRIVCFGR_ALRBPRIV /*!< Alarm B feature is privilege */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_PRIVILEGE_TAMP_FULL Privilege full tamp + * @{ + */ +#define LL_TAMP_PRIVILEGE_FULL_YES TAMP_PRIVCFGR_TAMPPRIV /*!< TAMP full privilege */ +#define LL_TAMP_PRIVILEGE_FULL_NO 0U /*!< TAMP is not privilege */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_PRIVILEGE_BACKUP_REG_ZONE Privilege Backup register privilege zone + * @{ + */ +#define LL_RTC_PRIVILEGE_BKUP_ZONE_NONE 0U +#define LL_RTC_PRIVILEGE_BKUP_ZONE_1 TAMP_PRIVCFGR_BKPRWPRIV +#define LL_RTC_PRIVILEGE_BKUP_ZONE_2 TAMP_PRIVCFGR_BKPWPRIV +#define LL_RTC_PRIVILEGE_BKUP_ZONE_ALL (LL_RTC_PRIVILEGE_BKUP_ZONE_1 | LL_RTC_PRIVILEGE_BKUP_ZONE_2) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) ((uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U))) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) \ + ((uint8_t)((((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U) + ((__VALUE__) & (uint8_t)0x0FU))) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll RTC_CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +#if defined(RTC_CR_OSEL) +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll RTC_CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} +#endif /* RTC_CR_OSEL */ + +#ifdef RTC_CR_TAMPALRM_TYPE +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TAMPALRM_TYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_GetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_TYPE)); +} +#endif /* RTC_CR_TAMPALRM_TYPE */ + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll RTC_ICSR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + SET_BIT(RTCx->ICSR, RTC_ICSR_INIT); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll RTC_ICSR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + CLEAR_BIT(RTCx->ICSR, RTC_ICSR_INIT); + +} + +/** + * @brief Set Binary mode (Sub Second Register) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function). + * @rmtoll RTC_ICSR BIN LL_RTC_SetBinaryMode + * @param RTCx RTC Instance + * @param BinaryMode can be one of the following values: + * @arg @ref LL_RTC_BINARY_NONE + * @arg @ref LL_RTC_BINARY_ONLY + * @arg @ref LL_RTC_BINARY_MIX + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetBinaryMode(RTC_TypeDef *RTCx, uint32_t BinaryMode) +{ + MODIFY_REG(RTCx->ICSR, RTC_ICSR_BIN, BinaryMode); +} + +/** + * @brief Get Binary mode (Sub Second Register) + * @rmtoll RTC_ICSR BIN LL_RTC_GetBinaryMode + * @param RTCx RTC Instance + * @retval This parameter can be one of the following values: + * @arg @ref LL_RTC_BINARY_NONE + * @arg @ref LL_RTC_BINARY_ONLY + * @arg @ref LL_RTC_BINARY_MIX + * @retval None + */ +__STATIC_INLINE uint32_t LL_RTC_GetBinaryMode(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ICSR, RTC_ICSR_BIN)); +} + +/** + * @brief Set Binary Mix mode BCDU + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function). + * @rmtoll RTC_ICSR BCDU LL_RTC_SetBinMixBCDU + * @param RTCx RTC Instance + * @param BinMixBcdU can be one of the following values: + * @arg @ref LL_RTC_BINARY_MIX_BCDU_0 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_1 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_2 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_3 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_4 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_5 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_6 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_7 + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetBinMixBCDU(RTC_TypeDef *RTCx, uint32_t BinMixBcdU) +{ + MODIFY_REG(RTCx->ICSR, RTC_ICSR_BCDU, BinMixBcdU); +} + +/** + * @brief Get Binary Mix mode BCDU + * @rmtoll RTC_ICSR BCDU LL_RTC_GetBinMixBCDU + * @param RTCx RTC Instance + * @retval This parameter can be one of the following values: + * @arg @ref LL_RTC_BINARY_MIX_BCDU_0 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_1 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_2 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_3 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_4 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_5 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_6 + * @arg @ref LL_RTC_BINARY_MIX_BCDU_7 + * @retval None + */ +__STATIC_INLINE uint32_t LL_RTC_GetBinMixBCDU(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ICSR, RTC_ICSR_BCDU)); +} + +#ifdef RTC_CR_POL +/** + * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll RTC_CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} +#endif /* RTC_CR_POL */ + +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll RTC_CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll RTC_CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1U : 0U); +} + +#if defined(RTC_CR_REFCKON) +/** + * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_EnableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_DisableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); +} +#endif /* RTC_CR_REFCKON */ + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + +#ifdef RTC_CR_TAMPOE +/** + * @brief Enable tamper output. + * @note When the tamper output is enabled, all external and internal tamper flags + * are ORed and routed to the TAMPALRM output. + * @rmtoll RTC_CR TAMPOE LL_RTC_EnableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableTamperOutput(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Disable tamper output. + * @rmtoll RTC_CR TAMPOE LL_RTC_DisableTamperOutput + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableTamperOutput(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPOE); +} + +/** + * @brief Check if tamper output is enabled or not. + * @rmtoll RTC_CR TAMPOE LL_RTC_IsTamperOutputEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsTamperOutputEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPOE) == (RTC_CR_TAMPOE)) ? 1U : 0U); +} + +/** + * @brief Enable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableAlarmPullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} +#endif /* RTC_CR_TAMPOE */ + +#ifdef RTC_CR_TAMPALRM_PU +/** + * @brief Disable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableAlarmPullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Check if internal pull-up in output mode is enabled or not. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_IsAlarmPullUpEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsAlarmPullUpEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU) == (RTC_CR_TAMPALRM_PU)) ? 1U : 0U); +} +#endif /* RTC_CR_TAMPALRM_PU */ + +#if defined(RTC_CR_OUT2EN) +/** + * @brief Enable RTC_OUT2 output + * @note RTC_OUT2 mapping depends on both OSEL (@ref LL_RTC_SetAlarmOutEvent) + * and COE (@ref LL_RTC_CAL_SetOutputFreq) settings. + * @note RTC_OUT2 is not available in VBAT mode. + * @rmtoll RTC_CR OUT2EN LL_RTC_EnableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableOutput2(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Disable RTC_OUT2 output + * @rmtoll RTC_CR OUT2EN LL_RTC_DisableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableOutput2(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Check if RTC_OUT2 output is enabled or not. + * @rmtoll RTC_CR OUT2EN LL_RTC_IsOutput2Enabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsOutput2Enabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_OUT2EN) == (RTC_CR_OUT2EN)) ? 1U : 0U); +} +#endif /* RTC_CR_OUT2EN */ +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll RTC_TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll RTC_TR HT LL_RTC_TIME_SetHour\n + * RTC_TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); +} + +/** + * @brief Get Hours in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll RTC_TR HT LL_RTC_TIME_GetHour\n + * RTC_TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_TR MNT LL_RTC_TIME_SetMinute\n + * RTC_TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); +} + +/** + * @brief Get Minutes in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll RTC_TR MNT LL_RTC_TIME_GetMinute\n + * RTC_TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_TR ST LL_RTC_TIME_SetSecond\n + * RTC_TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); +} + +/** + * @brief Get Seconds in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll RTC_TR ST LL_RTC_TIME_GetSecond\n + * RTC_TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll RTC_TR PM LL_RTC_TIME_Config\n + * RTC_TR HT LL_RTC_TIME_Config\n + * RTC_TR HU LL_RTC_TIME_Config\n + * RTC_TR MNT LL_RTC_TIME_Config\n + * RTC_TR MNU LL_RTC_TIME_Config\n + * RTC_TR ST LL_RTC_TIME_Config\n + * RTC_TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, + uint32_t Format12_24, + uint32_t Hours, + uint32_t Minutes, + uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TR HT LL_RTC_TIME_Get\n + * RTC_TR HU LL_RTC_TIME_Get\n + * RTC_TR MNT LL_RTC_TIME_Get\n + * RTC_TR MNU LL_RTC_TIME_Get\n + * RTC_TR ST LL_RTC_TIME_Get\n + * RTC_TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(const RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU)); + return (uint32_t)((((((temp & RTC_TR_HT) >> RTC_TR_HT_Pos) << 4U) | \ + ((temp & RTC_TR_HU) >> RTC_TR_HU_Pos)) << RTC_OFFSET_HOUR) | \ + (((((temp & RTC_TR_MNT) >> RTC_TR_MNT_Pos) << 4U) | \ + ((temp & RTC_TR_MNU) >> RTC_TR_MNU_Pos)) << RTC_OFFSET_MINUTE) | \ + ((((temp & RTC_TR_ST) >> RTC_TR_ST_Pos) << 4U) | ((temp & RTC_TR_SU) >> RTC_TR_SU_Pos))); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll RTC_CR BKP LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1U : 0U); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +/** + * @brief Get Sub second value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll RTC_SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} + +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll RTC_SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * RTC_SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll RTC_DR YT LL_RTC_DATE_SetYear\n + * RTC_DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); +} + +/** + * @brief Get Year in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll RTC_DR YT LL_RTC_DATE_GetYear\n + * RTC_DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); +} + +/** + * @brief Set Week day + * @rmtoll RTC_DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); +} + +/** + * @brief Get Week day + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll RTC_DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll RTC_DR MT LL_RTC_DATE_SetMonth\n + * RTC_DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); +} + +/** + * @brief Get Month in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_DR MT LL_RTC_DATE_GetMonth\n + * RTC_DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU))) >> RTC_DR_MU_Pos); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_DR DT LL_RTC_DATE_SetDay\n + * RTC_DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); +} + +/** + * @brief Get Day in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_DR DT LL_RTC_DATE_GetDay\n + * RTC_DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll RTC_DR WDU LL_RTC_DATE_Config\n + * RTC_DR MT LL_RTC_DATE_Config\n + * RTC_DR MU LL_RTC_DATE_Config\n + * RTC_DR DT LL_RTC_DATE_Config\n + * RTC_DR DU LL_RTC_DATE_Config\n + * RTC_DR YT LL_RTC_DATE_Config\n + * RTC_DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, + uint32_t WeekDay, + uint32_t Day, + uint32_t Month, + uint32_t Year) +{ + uint32_t temp; + + temp = (WeekDay << RTC_DR_WDU_Pos) | \ + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_DR WDU LL_RTC_DATE_Get\n + * RTC_DR MT LL_RTC_DATE_Get\n + * RTC_DR MU LL_RTC_DATE_Get\n + * RTC_DR DT LL_RTC_DATE_Get\n + * RTC_DR DU LL_RTC_DATE_Get\n + * RTC_DR YT LL_RTC_DATE_Get\n + * RTC_DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(const RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); + return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ + (((((temp & RTC_DR_DT) >> RTC_DR_DT_Pos) << 4U) | \ + ((temp & RTC_DR_DU) >> RTC_DR_DU_Pos)) << RTC_OFFSET_DAY) | \ + (((((temp & RTC_DR_MT) >> RTC_DR_MT_Pos) << 4U) | \ + ((temp & RTC_DR_MU) >> RTC_DR_MU_Pos)) << RTC_OFFSET_MONTH) | \ + ((((temp & RTC_DR_YT) >> RTC_DR_YT_Pos) << 4U) | ((temp & RTC_DR_YU) >> RTC_DR_YU_Pos))); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_SetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_GetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_SetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_SetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_GetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, + uint32_t Format12_24, + uint32_t Hours, + uint32_t Minutes, + uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | \ + RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | + (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm A Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask If binary mode is none, Value between Min_Data=0x0 and Max_Data=0xF + * else Value between Min_Data=0x0 and Max_Data=0x3F + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm A Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0xF + * else Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm A Binary mode auto clear + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRABINR SSCLR LL_RTC_ALMA_SetBinAutoClr + * @param RTCx RTC Instance + * @param BinaryAutoClr This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_NO + * @arg @ref LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_YES + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetBinAutoClr(RTC_TypeDef *RTCx, uint32_t BinaryAutoClr) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SSCLR, BinaryAutoClr); +} + +/** + * @brief Get Alarm A Binary mode auto clear + * @rmtoll RTC_ALRABINR SSCLR LL_RTC_ALMA_GetBinAutoClr + * @param RTCx RTC Instance + * @retval It can be one of the following values: + * @arg @ref LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_NO + * @arg @ref LL_RTC_ALMA_SUBSECONDBIN_AUTOCLR_YES + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetBinAutoClr(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SSCLR)); +} + +/** + * @brief Set Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMB ALARMB + * @{ + */ + +/** + * @brief Enable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Disable Alarm B + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBE LL_RTC_ALMB_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBE); +} + +/** + * @brief Specify the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_SetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1, Mask); +} + +/** + * @brief Get the Alarm B masks. + * @rmtoll RTC_ALRMBR MSK4 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK3 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK2 LL_RTC_ALMB_GetMask\n + * RTC_ALRMBR MSK1 LL_RTC_ALMB_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMB_MASK_NONE + * @arg @ref LL_RTC_ALMB_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMB_MASK_HOURS + * @arg @ref LL_RTC_ALMB_MASK_MINUTES + * @arg @ref LL_RTC_ALMB_MASK_SECONDS + * @arg @ref LL_RTC_ALMB_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMask(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_MSK4 | RTC_ALRMBR_MSK3 | RTC_ALRMBR_MSK2 | RTC_ALRMBR_MSK1)); +} + +/** + * @brief Enable AlarmB Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Disable AlarmB Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMBR WDSEL LL_RTC_ALMB_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMBR, RTC_ALRMBR_WDSEL); +} + +/** + * @brief Set ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_SetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU), + (((Day & 0xF0U) << (RTC_ALRMBR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMBR_DU_Pos))); +} + +/** + * @brief Get ALARM B Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMBR DT LL_RTC_ALMB_GetDay\n + * RTC_ALRMBR DU LL_RTC_ALMB_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_DT | RTC_ALRMBR_DU))) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_DU, WeekDay << RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Get ALARM B Weekday + * @rmtoll RTC_ALRMBR DU LL_RTC_ALMB_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetWeekDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_DU) >> RTC_ALRMBR_DU_Pos); +} + +/** + * @brief Set ALARM B time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM, TimeFormat); +} + +/** + * @brief Get ALARM B time format (AM or PM notation) + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTimeFormat(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBR, RTC_ALRMBR_PM)); +} + +/** + * @brief Set ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_SetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU), + (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos))); +} + +/** + * @brief Get ALARM B Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetHour\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetHour(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_HT | RTC_ALRMBR_HU))) >> RTC_ALRMBR_HU_Pos); +} + +/** + * @brief Set ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_SetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_SetMinute + * @param RTCx RTC Instance + * @param Minutes between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos))); +} + +/** + * @brief Get ALARM B Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMBR MNT LL_RTC_ALMB_GetMinute\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetMinute(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU))) >> RTC_ALRMBR_MNU_Pos); +} + +/** + * @brief Set ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_SetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos))); +} + +/** + * @brief Get ALARM B Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMBR ST LL_RTC_ALMB_GetSecond\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMBR, (RTC_ALRMBR_ST | RTC_ALRMBR_SU))) >> RTC_ALRMBR_SU_Pos); +} + +/** + * @brief Set Alarm B Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMBR PM LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_ConfigTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMB_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_ConfigTime(RTC_TypeDef *RTCx, + uint32_t Format12_24, + uint32_t Hours, + uint32_t Minutes, + uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMBR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMBR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMBR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMBR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMBR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMBR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMBR, RTC_ALRMBR_PM | RTC_ALRMBR_HT | RTC_ALRMBR_HU | RTC_ALRMBR_MNT | RTC_ALRMBR_MNU | \ + RTC_ALRMBR_ST | RTC_ALRMBR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMBR HT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR HU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNT LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR MNU LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR ST LL_RTC_ALMB_GetTime\n + * RTC_ALRMBR SU LL_RTC_ALMB_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetTime(const RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMB_GetHour(RTCx) << RTC_OFFSET_HOUR) | \ + (LL_RTC_ALMB_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMB_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm B Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRBE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask If binary mode is none, Value between Min_Data=0x0 and Max_Data=0xF + * else Value between Min_Data=0x0 and Max_Data=0x3F + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS, Mask << RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm B Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMBSSR MASKSS LL_RTC_ALMB_GetSubSecondMask + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0xF + * else Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecondMask(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_MASKSS) >> RTC_ALRMBSSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm B Binary mode auto clear + * @note This register can be written only when ALRBE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRBBINR SSCLR LL_RTC_ALMB_SetBinAutoClr + * @param RTCx RTC Instance + * @param BinaryAutoClr This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_NO + * @arg @ref LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_YES + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetBinAutoClr(RTC_TypeDef *RTCx, uint32_t BinaryAutoClr) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SSCLR, BinaryAutoClr); +} + +/** + * @brief Get Alarm B Binary mode auto clear + * @rmtoll RTC_ALRBBINR SSCLR LL_RTC_ALMB_GetBinAutoClr + * @param RTCx RTC Instance + * @retval It can be one of the following values: + * @arg @ref LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_NO + * @arg @ref LL_RTC_ALMB_SUBSECONDBIN_AUTOCLR_YES + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetBinAutoClr(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SSCLR)); +} + +/** + * @brief Set Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMB_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS, Subsecond); +} + +/** + * @brief Get Alarm B Sub seconds value + * @rmtoll RTC_ALRMBSSR SS LL_RTC_ALMB_GetSubSecond + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMB_GetSubSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMBSSR, RTC_ALRMBSSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_EnableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableInternalEvent(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Disable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_DisableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableInternalEvent(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ITSE); +} + +#ifdef RTC_CR_TSE +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} +#endif /* RTC_CR_TSE */ + +#if defined(RTC_CR_TSEDGE) +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} +#endif /* RTC_CR_TSEDGE */ + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll RTC_TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetHour\n + * RTC_TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_TSTR MNT LL_RTC_TS_GetMinute\n + * RTC_TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_TSTR ST LL_RTC_TS_GetSecond\n + * RTC_TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetTime\n + * RTC_TSTR HU LL_RTC_TS_GetTime\n + * RTC_TSTR MNT LL_RTC_TS_GetTime\n + * RTC_TSTR MNU LL_RTC_TS_GetTime\n + * RTC_TSTR ST LL_RTC_TS_GetTime\n + * RTC_TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_TSDR MT LL_RTC_TS_GetMonth\n + * RTC_TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_TSDR DT LL_RTC_TS_GetDay\n + * RTC_TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetDate\n + * RTC_TSDR MT LL_RTC_TS_GetDate\n + * RTC_TSDR MU LL_RTC_TS_GetDate\n + * RTC_TSDR DT LL_RTC_TS_GetDate\n + * RTC_TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get time-stamp sub second value + * @rmtoll RTC_TSDR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval If binary mode is none, Value between Min_Data=0x0 and Max_Data=0x7FFF + * else Value between Min_Data=0x0 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} + +/** + * @brief Activate timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_EnableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + +/** + * @brief Disable timestamp on tamper detection event + * @rmtoll RTC_CR TAMPTS LL_RTC_TS_DisableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPTS); +} + + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Enable\n + * TAMP_CR1 TAMP2E... LL_RTC_TAMPER_Enable\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR1, Tamper); +} + +/** + * @brief Clear TAMPx input detection + * @rmtoll TAMP_CR1 TAMP1E LL_RTC_TAMPER_Disable\n + * TAMP_CR1 TAMP2E... LL_RTC_TAMPER_Disable + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR1, Tamper); +} + +/** + * @brief Enable Tamper mask flag + * @note Associated Tamper IT must not enabled when tamper mask is set. + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_EnableMask\n + * TAMP_CR2 TAMP2MF... LL_RTC_TAMPER_EnableMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_MASK + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableMask(const RTC_TypeDef *RTCx, uint32_t Mask) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR2, Mask); +} + +/** + * @brief Disable Tamper mask flag + * @rmtoll TAMP_CR2 TAMP1MF LL_RTC_TAMPER_DisableMask\n + * TAMP_CR2 TAMP2MF... LL_RTC_TAMPER_DisableMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_MASK + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableMask(const RTC_TypeDef *RTCx, uint32_t Mask) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR2, Mask); +} + +/** + * @brief Enable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1POM LL_RTC_TAMPER_EnableEraseBKP\n + * TAMP_CR2 TAMP2POM... LL_RTC_TAMPER_EnableEraseBKP + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_NOERASE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableEraseBKP(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR2, Tamper); +} + +/** + * @brief Disable backup register erase after Tamper event detection + * @rmtoll TAMP_CR2 TAMP1POM LL_RTC_TAMPER_DisableEraseBKP\n + * TAMP_CR2 TAMP2POM... LL_RTC_TAMPER_DisableEraseBKP + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_NOERASE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableEraseBKP(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR2, Tamper); +} + +/** + * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) + * @rmtoll TAMP_FLTCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->FLTCR, TAMP_FLTCR_TAMPPUDIS); +} + +/** + * @brief Set RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge + * @param RTCx RTC Instance + * @param Duration This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(const RTC_TypeDef *RTCx, uint32_t Duration) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->FLTCR, TAMP_FLTCR_TAMPPRCH, Duration); +} + +/** + * @brief Get RTC_TAMPx precharge duration + * @rmtoll TAMP_FLTCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return (uint32_t)(READ_BIT(TAMP->FLTCR, TAMP_FLTCR_TAMPPRCH)); +} + +/** + * @brief Set RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_SetFilterCount + * @param RTCx RTC Instance + * @param FilterCount This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(const RTC_TypeDef *RTCx, uint32_t FilterCount) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->FLTCR, TAMP_FLTCR_TAMPFLT, FilterCount); +} + +/** + * @brief Get RTC_TAMPx filter count + * @rmtoll TAMP_FLTCR TAMPFLT LL_RTC_TAMPER_GetFilterCount + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return (uint32_t)(READ_BIT(TAMP->FLTCR, TAMP_FLTCR_TAMPFLT)); +} + +/** + * @brief Set Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq + * @param RTCx RTC Instance + * @param SamplingFreq This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(const RTC_TypeDef *RTCx, uint32_t SamplingFreq) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->FLTCR, TAMP_FLTCR_TAMPFREQ, SamplingFreq); +} + +/** + * @brief Get Tamper sampling frequency + * @rmtoll TAMP_FLTCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return (uint32_t)(READ_BIT(TAMP->FLTCR, TAMP_FLTCR_TAMPFREQ)); +} + +/** + * @brief Enable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n + * TAMP_CR2 TAMPxTRG LL_RTC_TAMPER_EnableActiveLevel\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_ACTIVELEVEL + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR2, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll TAMP_CR2 TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n + * TAMP_CR2 TAMPxTRG LL_RTC_TAMPER_DisableActiveLevel\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_TAMPER_ACTIVELEVEL + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(const RTC_TypeDef *RTCx, uint32_t Tamper) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR2, Tamper); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Internal_Tamper Internal Tamper + * @{ + */ + +/** + * @brief Enable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP1E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMP2E LL_RTC_TAMPER_ITAMP_Enable\n + * TAMP_CR1 ITAMPxE LL_RTC_TAMPER_ITAMP_Enable + * @param RTCx RTC Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_INTERNAL + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Enable(const RTC_TypeDef *RTCx, uint32_t InternalTamper) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR1, InternalTamper); +} + +/** + * @brief Disable internal tamper detection. + * @rmtoll TAMP_CR1 ITAMP1E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMP2E LL_RTC_TAMPER_ITAMP_Disable\n + * TAMP_CR1 ITAMPxE LL_RTC_TAMPER_ITAMP_Disable + * @param RTCx RTC Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_INTERNAL + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_Disable(const RTC_TypeDef *RTCx, uint32_t InternalTamper) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR1, InternalTamper); +} + +/** + * @brief Enable backup register erase after internal tamper event detection + * @rmtoll TAMP_CR3 ITAMP1POM LL_RTC_TAMPER_ITAMP_EnableEraseBKP\n + * TAMP_CR3 ITAMP2POM LL_RTC_TAMPER_ITAMP_EnableEraseBKP + * @param RTCx RTC Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_ITAMPER_NOERASE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_EnableEraseBKP(const RTC_TypeDef *RTCx, uint32_t InternalTamper) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->CR3, InternalTamper); +} + +/** + * @brief Disable backup register erase after internal tamper event detection + * @rmtoll TAMP_CR3 ITAMP1POM LL_RTC_TAMPER_ITAMP_DisableEraseBKP\n + * TAMP_CR3 ITAMP2POM LL_RTC_TAMPER_ITAMP_DisableEraseBKP + * @param RTCx RTC Instance + * @param InternalTamper This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_ITAMPER_NOERASE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ITAMP_DisableEraseBKP(const RTC_TypeDef *RTCx, uint32_t InternalTamper) +{ + UNUSED(RTCx); + SET_BIT(TAMP->CR3, InternalTamper); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Active_Tamper Active Tamper + * @{ + */ +/** + * @brief Enable tamper active mode. + * @rmtoll TAMP_ATCR1 TAMP1AM LL_RTC_TAMPER_ATAMP_EnableActiveMode\n + * @rmtoll TAMP_ATCR1 TAMP2AM LL_RTC_TAMPER_ATAMP_EnableActiveMode\n + * @rmtoll TAMP_ATCR1 TAMPxAM LL_RTC_TAMPER_ATAMP_EnableActiveMode + * @param Tamper to configure as active. This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_ACTIVE_MODE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_EnableActiveMode(uint32_t Tamper) +{ + SET_BIT(TAMP->ATCR1, Tamper); +} + +/** + * @brief Disable tamper active mode. + * @rmtoll TAMP_ATCR1 TAMP1AM LL_RTC_TAMPER_ATAMP_DisableActiveMode\n + * @rmtoll TAMP_ATCR1 TAMP2AM LL_RTC_TAMPER_ATAMP_DisableActiveMode\n + * @rmtoll TAMP_ATCR1 TAMPxAM LL_RTC_TAMPER_ATAMP_DisableActiveMode + * @param Tamper to configure as active. This parameter can be a combination of the following values: + * @arg @ref RTC_LL_EC_ACTIVE_MODE + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_DisableActiveMode(uint32_t Tamper) +{ + CLEAR_BIT(TAMP->ATCR1, Tamper); +} + +/** + * @brief Enable active tamper filter. + * @rmtoll TAMP_ATCR1 FLTEN LL_RTC_TAMPER_ATAMP_EnableFilter\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_EnableFilter(void) +{ + SET_BIT(TAMP->ATCR1, TAMP_ATCR1_FLTEN); +} + +/** + * @brief Disable active tamper filter. + * @rmtoll TAMP_ATCR1 FLTEN LL_RTC_TAMPER_ATAMP_DisableFilter\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_DisableFilter(void) +{ + CLEAR_BIT(TAMP->ATCR1, TAMP_ATCR1_FLTEN); +} + +/** + * @brief Set Active tamper output change period. + * @rmtoll TAMP_ATCR1 ATPER LL_RTC_TAMPER_ATAMP_SetOutputChangePeriod\n + * @param ActiveOutputChangePeriod This parameter can be a value from 0 to 7 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_SetOutputChangePeriod(uint32_t ActiveOutputChangePeriod) +{ + MODIFY_REG(TAMP->ATCR1, TAMP_ATCR1_ATPER, (ActiveOutputChangePeriod << TAMP_ATCR1_ATPER_Pos)); +} + +/** + * @brief Get Active tamper output change period. + * @rmtoll TAMP_ATCR1 ATPER LL_RTC_TAMPER_ATAMP_GetOutputChangePeriod\n + * @retval Output change period. This parameter can be a value from 0 to 7. + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_ATAMP_GetOutputChangePeriod(void) +{ + return (READ_BIT(TAMP->ATCR1, TAMP_ATCR1_ATPER) >> TAMP_ATCR1_ATPER_Pos); +} + +/** + * @brief Set Active tamper asynchronous prescaler clock selection. + * @rmtoll TAMP_ATCR1 ATCKSEL LL_RTC_TAMPER_ATAMP_SetAsyncPrescaler\n + * @param ActiveAsynvPrescaler Specifies the Active Tamper asynchronous Prescaler clock. + This parameter can be a value of the following values: + * @arg @ref RTC_LL_EC_ACTIVE_ASYNC_PRESCALER + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_SetAsyncPrescaler(uint32_t ActiveAsynvPrescaler) +{ + MODIFY_REG(TAMP->ATCR1, TAMP_ATCR1_ATCKSEL, ActiveAsynvPrescaler); +} + +/** + * @brief Get Active tamper asynchronous prescaler clock selection. + * @rmtoll TAMP_ATCR1 ATCKSEL LL_RTC_TAMPER_ATAMP_GetAsyncPrescaler\n + * @retval One of @arg @ref RTC_LL_EC_ACTIVE_ASYNC_PRESCALER + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_ATAMP_GetAsyncPrescaler(void) +{ + return (READ_BIT(TAMP->ATCR1, TAMP_ATCR1_ATCKSEL)); +} + +/** + * @brief Enable active tamper output sharing. + * @rmtoll TAMP_ATCR1 ATOSHARE LL_RTC_TAMPER_ATAMP_EnableOutputSharing\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_EnableOutputSharing(void) +{ + SET_BIT(TAMP->ATCR1, TAMP_ATCR1_ATOSHARE); +} + +/** + * @brief Disable active tamper output sharing. + * @rmtoll TAMP_ATCR1 ATOSHARE LL_RTC_TAMPER_ATAMP_DisableOutputSharing\n + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_DisableOutputSharing(void) +{ + CLEAR_BIT(TAMP->ATCR1, TAMP_ATCR1_ATOSHARE); +} + +/** + * @brief Set Active tamper shared output selection. + * @rmtoll TAMP_ATCR2 ATOSELx LL_RTC_TAMPER_ATAMP_SetSharedOuputSelection\n + * @param OutputSelection Specifies all the output selection of the Active Tamper. + This parameter is a combinasation of the following values: + * One of @arg @ref RTC_LL_EC_ACTIVE_OUTPUT_SELECTION + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_SetSharedOuputSelection(uint32_t OutputSelection) +{ +#if (RTC_TAMP_NB == 2U) + MODIFY_REG(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2), OutputSelection); +#elif (RTC_TAMP_NB == 3U) + MODIFY_REG(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3), OutputSelection); +#elif (RTC_TAMP_NB == 8U) + MODIFY_REG(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3 | TAMP_ATCR2_ATOSEL4 | \ + TAMP_ATCR2_ATOSEL5 | TAMP_ATCR2_ATOSEL6 | TAMP_ATCR2_ATOSEL7 | TAMP_ATCR2_ATOSEL8), \ + OutputSelection); +#endif /* RTC_TAMP_NB */ + +} + +/** + * @brief Get Active tamper shared output selection. + * @rmtoll TAMP_ATCR2 ATOSELx LL_RTC_TAMPER_ATAMP_GetSharedOuputSelection\n + * @retval A combination of @arg @ref RTC_LL_EC_ACTIVE_OUTPUT_SELECTION + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_ATAMP_GetSharedOuputSelection(void) +{ +#if (RTC_TAMP_NB == 2U) + return (READ_BIT(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2))); +#elif (RTC_TAMP_NB == 3U) + return (READ_BIT(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3))); +#elif (RTC_TAMP_NB == 8U) + return (READ_BIT(TAMP->ATCR2, (TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3 | TAMP_ATCR2_ATOSEL4 | \ + TAMP_ATCR2_ATOSEL5 | TAMP_ATCR2_ATOSEL6 | TAMP_ATCR2_ATOSEL7 | TAMP_ATCR2_ATOSEL8))); +#endif /* RTC_TAMP_NB */ +} + +/** + * @brief Write active tamper seed. + * @rmtoll TAMP_ATSEEDR SEED LL_RTC_TAMPER_ATAMP_WriteSeed\n + * @param Seed + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_ATAMP_WriteSeed(uint32_t Seed) +{ + WRITE_REG(TAMP->ATSEEDR, Seed); +} + +/** + * @brief Get active tamper initialization status flag. + * @rmtoll TAMP_ATOR INITS LL_RTC_IsActiveFlag_ATAMP_INITS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ATAMP_INITS(void) +{ + return ((READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) == (TAMP_ATOR_INITS)) ? 1U : 0U); +} + +/** + * @brief Get active tamper seed running status flag. + * @rmtoll TAMP_ATOR SEEDF LL_RTC_IsActiveFlag_ATAMP_SEEDF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ATAMP_SEEDF(void) +{ + return ((READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) == (TAMP_ATOR_SEEDF)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Wakeup Wakeup + * @{ + */ + +/** + * @brief Enable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Disable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Check if Wakeup timer is enabled or not + * @rmtoll RTC_CR WUTE LL_RTC_WAKEUP_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)) ? 1U : 0U); +} + +/** + * @brief Select Wakeup clock + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RTC_CR WUTE bit = 0 and RTC_ICSR WUTWF bit = 1 + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_SetClock + * @param RTCx RTC Instance + * @param WakeupClock This parameter can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) +{ + MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); +} + +/** + * @brief Get Wakeup clock + * @rmtoll RTC_CR WUCKSEL LL_RTC_WAKEUP_GetClock + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); +} + +/** + * @brief Set Wakeup auto-reload value + * @note Bit can be written only when WUTWF is set to 1 in RTC_ICSR + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_SetAutoReload + * @param RTCx RTC Instance + * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) +{ + MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); +} + +/** + * @brief Get Wakeup auto-reload value + * @rmtoll RTC_WUTR WUT LL_RTC_WAKEUP_GetAutoReload + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified Backup data register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_SetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg LL_RTC_BKP_DRx ... + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BKP_SetRegister(const RTC_TypeDef *RTCx, uint32_t BackupRegister, uint32_t Data) +{ + __IO uint32_t tmp; + + UNUSED(RTCx); + + tmp = (uint32_t)(&(TAMP->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll TAMP_BKPxR BKP LL_RTC_BKP_GetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg LL_RTC_BKP_DRx ... + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BKP_GetRegister(const RTC_TypeDef *RTCx, uint32_t BackupRegister) +{ + uint32_t tmp; + + UNUSED(RTCx); + + tmp = (uint32_t)(&(TAMP->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +#if defined(RTC_CR_COE) +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR COE LL_RTC_CAL_SetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll RTC_CR COE LL_RTC_CAL_GetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +} +#endif /* RTC_CR_COE */ + +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ICSR + * @rmtoll RTC_CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll RTC_CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1U : 0U); +} + +/** + * @brief Set the calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ICSR + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_SetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get the calibration cycle period + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_GetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ICSR + * @rmtoll RTC_CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get Calibration minus + * @rmtoll RTC_CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(const RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} + +/** + * @brief Enable Calibration Low Power + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR LPCAL LL_RTC_CAL_LowPower_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_LowPower_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CALR, RTC_CALR_LPCAL); +} + +/** + * @brief Disable Calibration Low Power + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR LPCAL LL_RTC_CAL_LowPower_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_LowPower_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CALR, RTC_CALR_LPCAL); +} + +/** + * @brief Check if Calibration Low Power is enabled or not + * @rmtoll RTC_CALR LPCAL LL_RTC_CAL_LowPower_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_LowPower_IsEnabled(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_LPCAL) == (RTC_CALR_LPCAL)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Time-stamp flag + * @rmtoll RTC_SR ITSF LL_RTC_IsActiveFlag_ITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITS(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ITSF) == (RTC_SR_ITSF)) ? 1U : 0U); +} + +/** + * @brief Get Recalibration pending Flag + * @rmtoll RTC_ICSR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RECALPF) == (RTC_ICSR_RECALPF)) ? 1U : 0U); +} + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll RTC_SR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSOVF) == (RTC_SR_TSOVF)) ? 1U : 0U); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll RTC_SR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSF) == (RTC_SR_TSF)) ? 1U : 0U); +} + +/** + * @brief Get Wakeup timer flag + * @rmtoll RTC_SR WUTF LL_RTC_IsActiveFlag_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_WUTF) == (RTC_SR_WUTF)) ? 1U : 0U); +} + +/** + * @brief Get Alarm B flag + * @rmtoll RTC_SR ALRBF LL_RTC_IsActiveFlag_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRB(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRBF) == (RTC_SR_ALRBF)) ? 1U : 0U); +} + +/** + * @brief Get Alarm A flag + * @rmtoll RTC_SR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRAF) == (RTC_SR_ALRAF)) ? 1U : 0U); +} + +/** + * @brief Get SSR Underflow flag + * @rmtoll RTC_SR SSRUF LL_RTC_IsActiveFlag_SSRU + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SSRU(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_SSRUF) == (RTC_SR_SSRUF)) ? 1U : 0U); +} + +/** + * @brief Clear Internal Time-stamp flag + * @rmtoll RTC_SCR CITSF LL_RTC_ClearFlag_ITS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CITSF); +} + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll RTC_SCR CTSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CTSOVF); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll RTC_SCR CTSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CTSF); +} + +/** + * @brief Clear Wakeup timer flag + * @rmtoll RTC_SCR CWUTF LL_RTC_ClearFlag_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CWUTF); +} + +/** + * @brief Clear Alarm B flag + * @rmtoll RTC_SCR CALRBF LL_RTC_ClearFlag_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRB(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CALRBF); +} + +/** + * @brief Clear Alarm A flag + * @rmtoll RTC_SCR CALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CALRAF); +} + +/** + * @brief Clear SSR Underflow flag + * @rmtoll RTC_SCR CSSRUF LL_RTC_ClearFlag_SSRU + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_SSRU(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->SCR, RTC_SCR_CSSRUF); +} + +/** + * @brief Get Initialization flag + * @rmtoll RTC_ICSR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITF) == (RTC_ICSR_INITF)) ? 1U : 0U); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RSF) == (RTC_ICSR_RSF)) ? 1U : 0U); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ICSR, (~((RTC_ICSR_RSF | RTC_ICSR_INIT) & 0x000000FFU) | (RTCx->ICSR & RTC_ICSR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll RTC_ICSR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITS) == (RTC_ICSR_INITS)) ? 1U : 0U); +} + +/** + * @brief Get Shift operation pending flag + * @rmtoll RTC_ICSR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_SHPF) == (RTC_ICSR_SHPF)) ? 1U : 0U); +} + +/** + * @brief Get Wakeup timer write flag + * @rmtoll RTC_ICSR WUTWF LL_RTC_IsActiveFlag_WUTW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_WUTWF) == (RTC_ICSR_WUTWF)) ? 1U : 0U); +} + +/** + * @brief Get Alarm A masked flag. + * @rmtoll RTC_MISR ALRAMF LL_RTC_IsActiveFlag_ALRAM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRAMF) == (RTC_MISR_ALRAMF)) ? 1U : 0U); +} + +/** + * @brief Get SSR Underflow masked flag. + * @rmtoll RTC_MISR SSRUMF LL_RTC_IsActiveFlag_SSRUM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SSRUM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_SSRUMF) == (RTC_MISR_SSRUMF)) ? 1U : 0U); +} + +/** + * @brief Get Alarm B masked flag. + * @rmtoll RTC_MISR ALRBMF LL_RTC_IsActiveFlag_ALRBM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRBM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRBMF) == (RTC_MISR_ALRBMF)) ? 1U : 0U); +} + +/** + * @brief Get Wakeup timer masked flag. + * @rmtoll RTC_MISR WUTMF LL_RTC_IsActiveFlag_WUTM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_WUTMF) == (RTC_MISR_WUTMF)) ? 1U : 0U); +} + +/** + * @brief Get Time-stamp masked flag. + * @rmtoll RTC_MISR TSMF LL_RTC_IsActiveFlag_TSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSMF) == (RTC_MISR_TSMF)) ? 1U : 0U); +} + +/** + * @brief Get Time-stamp overflow masked flag. + * @rmtoll RTC_MISR TSOVMF LL_RTC_IsActiveFlag_TSOVM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOVM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSOVMF) == (RTC_MISR_TSOVMF)) ? 1U : 0U); +} + +/** + * @brief Get Internal Time-stamp masked flag. + * @rmtoll RTC_MISR ITSMF LL_RTC_IsActiveFlag_ITSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITSM(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ITSMF) == (RTC_MISR_ITSMF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 1 detection flag. + * @rmtoll TAMP_SR TAMP1F LL_RTC_IsActiveFlag_TAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP1F) == (TAMP_SR_TAMP1F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 2 detection flag. + * @rmtoll TAMP_SR TAMP2F LL_RTC_IsActiveFlag_TAMP2 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP2F) == (TAMP_SR_TAMP2F)) ? 1U : 0U); +} + +#if (RTC_TAMP_NB > 2U) +/** + * @brief Get tamper 3 detection flag. + * @rmtoll TAMP_SR TAMP3F LL_RTC_IsActiveFlag_TAMP3 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP3F) == (TAMP_SR_TAMP3F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 4 detection flag. + * @rmtoll TAMP_SR TAMP4F LL_RTC_IsActiveFlag_TAMP4 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP4F) == (TAMP_SR_TAMP4F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 5 detection flag. + * @rmtoll TAMP_SR TAMP5F LL_RTC_IsActiveFlag_TAMP5 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP5F) == (TAMP_SR_TAMP5F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 6 detection flag. + * @rmtoll TAMP_SR TAMP6F LL_RTC_IsActiveFlag_TAMP6 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP6F) == (TAMP_SR_TAMP6F)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 2U) */ + +#if (RTC_TAMP_NB > 6U) +/** + * @brief Get tamper 7 detection flag. + * @rmtoll TAMP_SR TAMP7F LL_RTC_IsActiveFlag_TAMP7 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP7F) == (TAMP_SR_TAMP7F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 8 detection flag. + * @rmtoll TAMP_SR TAMP8F LL_RTC_IsActiveFlag_TAMP8 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_TAMP8F) == (TAMP_SR_TAMP8F)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 6U) */ + +/** + * @brief Get internal tamper 1 detection flag. + * @rmtoll TAMP_SR ITAMP1F LL_RTC_IsActiveFlag_ITAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP1F) == (TAMP_SR_ITAMP1F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 2 detection flag. + * @rmtoll TAMP_SR ITAMP2F LL_RTC_IsActiveFlag_ITAMP2 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP2F) == (TAMP_SR_ITAMP2F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 3 detection flag. + * @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP3 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP3F) == (TAMP_SR_ITAMP3F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 4 detection flag. + * @rmtoll TAMP_SR ITAMP4F LL_RTC_IsActiveFlag_ITAMP4 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP4F) == (TAMP_SR_ITAMP4F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 5 detection flag. + * @rmtoll TAMP_SR ITAMP5F LL_RTC_IsActiveFlag_ITAMP5 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP5F) == (TAMP_SR_ITAMP5F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 6 detection flag. + * @rmtoll TAMP_SR ITAMP6F LL_RTC_IsActiveFlag_ITAMP6 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP6F) == (TAMP_SR_ITAMP6F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 7 detection flag. + * @rmtoll TAMP_SR ITAMP7F LL_RTC_IsActiveFlag_ITAMP7 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP7F) == (TAMP_SR_ITAMP7F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 8 detection flag. + * @rmtoll TAMP_SR ITAMP8F LL_RTC_IsActiveFlag_ITAMP8 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP8F) == (TAMP_SR_ITAMP8F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 9 detection flag. + * @rmtoll TAMP_SR ITAMP9F LL_RTC_IsActiveFlag_ITAMP9 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP9(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP9F) == (TAMP_SR_ITAMP9F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 11 detection flag. + * @rmtoll TAMP_SR ITAMP11F LL_RTC_IsActiveFlag_ITAMP11 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP11(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP11F) == (TAMP_SR_ITAMP11F)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 15 detection flag. + * @rmtoll TAMP_SR ITAMP15F LL_RTC_IsActiveFlag_ITAMP15 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP15(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->SR, TAMP_SR_ITAMP15F) == (TAMP_SR_ITAMP15F)) ? 1U : 0U); +} + +/** + * @brief Get tamper 1 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP1MF LL_RTC_IsActiveFlag_TAMP1M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP1MF) == (TAMP_MISR_TAMP1MF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 2 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP2MF LL_RTC_IsActiveFlag_TAMP2M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP2MF) == (TAMP_MISR_TAMP2MF)) ? 1U : 0U); +} + +#if (RTC_TAMP_NB > 2U) +/** + * @brief Get tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP3MF LL_RTC_IsActiveFlag_TAMP3M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP3MF) == (TAMP_MISR_TAMP3MF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 4 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP4MF LL_RTC_IsActiveFlag_TAMP4M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP4M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP4MF) == (TAMP_MISR_TAMP4MF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 5 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP5MF LL_RTC_IsActiveFlag_TAMP5M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP5M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP5MF) == (TAMP_MISR_TAMP5MF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 6 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP6MF LL_RTC_IsActiveFlag_TAMP6M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP6M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP6MF) == (TAMP_MISR_TAMP6MF)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 2U) */ + +#if (RTC_TAMP_NB > 6U) +/** + * @brief Get tamper 7 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP7MF LL_RTC_IsActiveFlag_TAMP7M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP7M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP7MF) == (TAMP_MISR_TAMP7MF)) ? 1U : 0U); +} + +/** + * @brief Get tamper 8 interrupt masked flag. + * @rmtoll TAMP_MISR TAMP8MF LL_RTC_IsActiveFlag_TAMP8M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP8M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_TAMP8MF) == (TAMP_MISR_TAMP8MF)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 6U) */ + +/** + * @brief Get internal tamper 1 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP1MF LL_RTC_IsActiveFlag_ITAMP1M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP1M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP1MF) == (TAMP_MISR_ITAMP1MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 2 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP2MF LL_RTC_IsActiveFlag_ITAMP2M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP2M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP2MF) == (TAMP_MISR_ITAMP2MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 3 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP3MF LL_RTC_IsActiveFlag_ITAMP3M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP3M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP3MF) == (TAMP_MISR_ITAMP3MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 4 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP4MF LL_RTC_IsActiveFlag_ITAMP4M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP4M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP4MF) == (TAMP_MISR_ITAMP4MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 5 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP5MF LL_RTC_IsActiveFlag_ITAMP5M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP5M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP5MF) == (TAMP_MISR_ITAMP5MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 6 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP6MF LL_RTC_IsActiveFlag_ITAMP6M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP6M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP6MF) == (TAMP_MISR_ITAMP6MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 7 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP7MF LL_RTC_IsActiveFlag_ITAMP7M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP7M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP7MF) == (TAMP_MISR_ITAMP7MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 8 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP8MF LL_RTC_IsActiveFlag_ITAMP8M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP8M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP8MF) == (TAMP_MISR_ITAMP8MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 9 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP9MF LL_RTC_IsActiveFlag_ITAMP9M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP9M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP9MF) == (TAMP_MISR_ITAMP9MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 11 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP11MF LL_RTC_IsActiveFlag_ITAMP11M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP11M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP11MF) == (TAMP_MISR_ITAMP11MF)) ? 1U : 0U); +} + +/** + * @brief Get internal tamper 15 interrupt masked flag. + * @rmtoll TAMP_MISR ITAMP15MF LL_RTC_IsActiveFlag_ITAMP15M + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITAMP15M(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->MISR, TAMP_MISR_ITAMP15MF) == (TAMP_MISR_ITAMP15MF)) ? 1U : 0U); +} + +/** + * @brief Clear tamper 1 detection flag. + * @rmtoll TAMP_SCR CTAMP1F LL_RTC_ClearFlag_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP1F); +} + +/** + * @brief Clear tamper 2 detection flag. + * @rmtoll TAMP_SCR CTAMP2F LL_RTC_ClearFlag_TAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP2F); +} + +#if (RTC_TAMP_NB > 2U) +/** + * @brief Clear tamper 3 detection flag. + * @rmtoll TAMP_SCR CTAMP3F LL_RTC_ClearFlag_TAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP3F); +} + +/** + * @brief Clear tamper 4 detection flag. + * @rmtoll TAMP_SCR CTAMP4F LL_RTC_ClearFlag_TAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP4F); +} + +/** + * @brief Clear tamper 5 detection flag. + * @rmtoll TAMP_SCR CTAMP5F LL_RTC_ClearFlag_TAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP5F); +} + +/** + * @brief Clear tamper 6 detection flag. + * @rmtoll TAMP_SCR CTAMP6F LL_RTC_ClearFlag_TAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP6F); +} +#endif /* (RTC_TAMP_NB > 2U) */ + +#if (RTC_TAMP_NB > 6U) +/** + * @brief Clear tamper 7 detection flag. + * @rmtoll TAMP_SCR CTAMP7F LL_RTC_ClearFlag_TAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP7F); +} + +/** + * @brief Clear tamper 8 detection flag. + * @rmtoll TAMP_SCR CTAMP8F LL_RTC_ClearFlag_TAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CTAMP8F); +} +#endif /* (RTC_TAMP_NB > 6U) */ + +/** + * @brief Clear internal tamper 1 detection flag. + * @rmtoll TAMP_SCR CITAMP1F LL_RTC_ClearFlag_ITAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP1F); +} + +/** + * @brief Clear internal tamper 2 detection flag. + * @rmtoll TAMP_SCR CITAMP2F LL_RTC_ClearFlag_ITAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP2F); +} + +/** + * @brief Clear internal tamper 3 detection flag. + * @rmtoll TAMP_SCR CITAMP3F LL_RTC_ClearFlag_ITAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP3F); +} + +/** + * @brief Clear internal tamper 4 detection flag. + * @rmtoll TAMP_SCR CITAMP4F LL_RTC_ClearFlag_ITAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP4F); +} + +/** + * @brief Clear internal tamper 5 detection flag. + * @rmtoll TAMP_SCR CITAMP5F LL_RTC_ClearFlag_ITAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP5F); +} + +/** + * @brief Clear internal tamper 6 detection flag. + * @rmtoll TAMP_SCR CITAMP6F LL_RTC_ClearFlag_ITAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP6F); +} + +/** + * @brief Clear internal tamper 7 detection flag. + * @rmtoll TAMP_SCR CITAMP7F LL_RTC_ClearFlag_ITAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP7F); +} + +/** + * @brief Clear internal tamper 8 detection flag. + * @rmtoll TAMP_SCR CITAMP8F LL_RTC_ClearFlag_ITAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP8F); +} + +/** + * @brief Clear internal tamper 9 detection flag. + * @rmtoll TAMP_SCR CITAMP9F LL_RTC_ClearFlag_ITAMP9 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP9(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP9F); +} + +/** + * @brief Clear internal tamper 11 detection flag. + * @rmtoll TAMP_SCR CITAMP11F LL_RTC_ClearFlag_ITAMP11 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP11(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP11F); +} + +/** + * @brief Clear internal tamper 15 detection flag. + * @rmtoll TAMP_SCR CITAMP15F LL_RTC_ClearFlag_ITAMP15 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITAMP15(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->SCR, TAMP_SCR_CITAMP15F); +} + +/** + * @} + */ + +#if defined(RTC_PRIVCFGR_PRIV) +/** @defgroup RTC_LL_EF_PRIVILEGE PRIVILEGE_Management + * @{ + */ + +/** + * @brief Set RTC privilege level. + * @note Privilege features are relevant if LL_RTC_PRIVILEGE_FULL_NO. + * @rmtoll RTC_PRIVCFGR PRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR INITPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR CALPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR TSPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR WUTPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR ALRAPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR ALRBPRIV LL_RTC_SetRtcPrivilege + * @param RTCx RTC Instance + * @param rtcPrivilege This parameter can be a combination of the following values: + * @arg @ref LL_RTC_PRIVILEGE_FULL_YES + * @arg @ref LL_RTC_PRIVILEGE_FULL_NO + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_INIT + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_CAL + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_TS + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_WUT + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_ALRA + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_ALRB + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetRtcPrivilege(RTC_TypeDef *RTCx, uint32_t rtcPrivilege) +{ + MODIFY_REG(RTCx->PRIVCFGR, RTC_PRIVCFGR_PRIV | RTC_PRIVCFGR_INITPRIV | RTC_PRIVCFGR_CALPRIV | RTC_PRIVCFGR_TSPRIV | \ + RTC_PRIVCFGR_WUTPRIV | RTC_PRIVCFGR_ALRAPRIV | RTC_PRIVCFGR_ALRBPRIV, rtcPrivilege); +} + +/** + * @brief Get RTC privilege level. + * @note Privilege features are relevant if LL_RTC_PRIVILEGE_FULL_NO. + * @rmtoll RTC_PRIVCFGR PRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR INITPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR CALPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR TSPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR WUTPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR ALRAPRIV LL_RTC_SetRtcPrivilege + * @rmtoll RTC_PRIVCFGR ALRBPRIV LL_RTC_SetRtcPrivilege + * @param RTCx RTC Instance + * @retval Combination of the following values: + * @arg @ref LL_RTC_PRIVILEGE_FULL_YES + * @arg @ref LL_RTC_PRIVILEGE_FULL_NO + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_INIT + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_CAL + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_TS + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_WUT + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_ALRA + * @arg @ref LL_RTC_PRIVILEGE_FEATURE_ALRB + */ +__STATIC_INLINE uint32_t LL_RTC_GetRtcPrivilege(const RTC_TypeDef *RTCx) +{ + return READ_BIT(RTCx->PRIVCFGR, RTC_PRIVCFGR_PRIV | RTC_PRIVCFGR_INITPRIV | RTC_PRIVCFGR_CALPRIV | \ + RTC_PRIVCFGR_TSPRIV | RTC_PRIVCFGR_WUTPRIV | RTC_PRIVCFGR_ALRAPRIV | \ + RTC_PRIVCFGR_ALRBPRIV); +} + +/** + * @brief Set TAMPER privilege level. + * @rmtoll TAMP_PRIVCFGR TAMPPRIV LL_RTC_SetTampPrivilege + * @param RTCx RTC Instance + * @param tampPrivilege This parameter can be one of the following values: + * @arg @ref LL_TAMP_PRIVILEGE_FULL_YES + * @arg @ref LL_TAMP_PRIVILEGE_FULL_NO + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetTampPrivilege(const RTC_TypeDef *RTCx, uint32_t tampPrivilege) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->PRIVCFGR, TAMP_PRIVCFGR_TAMPPRIV, tampPrivilege); +} + +/** + * @brief Get TAMPER privilege level. + * @rmtoll TAMP_PRIVCFGR TAMPPRIV LL_RTC_GetTampPrivilege + * @param RTCx RTC Instance + * @retval This parameter can be one of the following values: + * @arg @ref LL_TAMP_PRIVILEGE_FULL_YES + * @arg @ref LL_TAMP_PRIVILEGE_FULL_NO + */ +__STATIC_INLINE uint32_t LL_RTC_GetTampPrivilege(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return READ_BIT(TAMP->PRIVCFGR, TAMP_PRIVCFGR_TAMPPRIV); +} + +/** + * @brief Set Backup Registers privilege level. + * @rmtoll TAMP_PRIVCFGR BKPWPRIV LL_RTC_SetBackupRegisterPrivilege + * @rmtoll TAMP_PRIVCFGR BKPRWPRIV LL_RTC_SetBackupRegisterPrivilege + * @param RTCx RTC Instance + * @param bckupRegisterPrivilege This parameter can be one of the following values: + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_NONE + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_1 + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_2 + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetBackupRegisterPrivilege(const RTC_TypeDef *RTCx, uint32_t bckupRegisterPrivilege) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->PRIVCFGR, (TAMP_PRIVCFGR_BKPWPRIV | TAMP_PRIVCFGR_BKPRWPRIV), bckupRegisterPrivilege); +} + +/** + * @brief Get Backup Registers privilege level. + * @rmtoll TAMP_PRIVCFGR BKPWPRIV LL_RTC_GetBackupRegisterPrivilege + * @rmtoll TAMP_PRIVCFGR BKPRWPRIV LL_RTC_GetBackupRegisterPrivilege + * @param RTCx RTC Instance + * @retval This parameter can be one of the following values: + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_NONE + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_1 + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_2 + * @arg @ref LL_RTC_PRIVILEGE_BKUP_ZONE_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_GetBackupRegisterPrivilege(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return READ_BIT(TAMP->PRIVCFGR, (TAMP_PRIVCFGR_BKPWPRIV | TAMP_PRIVCFGR_BKPRWPRIV)); +} +/** + * @} + */ +#endif /* RTC_PRIVCFGR_PRIV */ + +/** @defgroup RTC_LL_EF_BACKUP_REG_PROTECTION PROTECTION_BACKUP_REG_Management + * @brief Backup register protection is common to security and privilege. + * @{ + */ + +/** + * @brief Set Backup registers protection level. + * @note Zone 1 : read protection write protection + * @note Zone 2 : read non-protection write protection + * @note Zone 3 : read non-protection write non-protection + * @note zone 1 : start from 0 to startZone2 start value + * @note zone 2 : start from startZone2 start value to startZone3 start value + * @note zone 3 : start from to startZone3 to the end of BACKUPREG + * @rmtoll TAMP_CFGR BKPW LL_RTC_SetBackupRegProtection + * @rmtoll TAMP_CFGR BKPRW LL_RTC_SetBackupRegProtection + * @param RTCx RTC Instance + * @param startZone2 This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg LL_RTC_BKP_DRx ... + * @param startZone3 This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @arg LL_RTC_BKP_DRx ... + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetBackupRegProtection(const RTC_TypeDef *RTCx, uint32_t startZone2, uint32_t startZone3) +{ + UNUSED(RTCx); + MODIFY_REG(TAMP->CFGR, (TAMP_CFGR_BKPRW_Msk | TAMP_CFGR_BKPW_Msk), + (startZone2 << TAMP_CFGR_BKPRW_Pos) | (startZone3 << TAMP_CFGR_BKPW_Pos)); +} + +/** + * @brief Get Backup registers protection level start zone 2. + * @note Zone 1 : read protection write protection + * @note Zone 2 : read non-protection/non-privile write protection + * @note Zone 3 : read non-protection write non-protection + * @rmtoll TAMP_CFGR BKPRW LL_RTC_GetBackupRegProtectionStartZone2 + * @param RTCx RTC Instance + * @retval Start zone 2 + */ +__STATIC_INLINE uint32_t LL_RTC_GetBackupRegProtectionStartZone2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return READ_BIT(TAMP->CFGR, TAMP_CFGR_BKPRW_Msk) >> TAMP_CFGR_BKPRW_Pos; +} + +/** + * @brief Get Backup registers protection level start zone 3. + * @note Zone 1 : read protection write protection + * @note Zone 2 : read non-protection write protection + * @note Zone 3 : read non-protection write non-protection + * @rmtoll TAMP_CFGR BKPW LL_RTC_GetBackupRegProtectionStartZone3 + * @param RTCx RTC Instance + * @retval Start zone 2 + */ +__STATIC_INLINE uint32_t LL_RTC_GetBackupRegProtectionStartZone3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return READ_BIT(TAMP->CFGR, TAMP_CFGR_BKPW_Msk) >> TAMP_CFGR_BKPW_Pos; +} +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Enable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_EnableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Disable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR WUTIE LL_RTC_DisableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Enable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_EnableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRB(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Disable Alarm B interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRBIE LL_RTC_DisableIT_ALRB + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRB(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRBIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Enable SSR Underflow interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SSRUIE LL_RTC_EnableIT_SSRU + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_SSRU(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SSRUIE); +} + +/** + * @brief Disable SSR Underflow interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SSRUIE LL_RTC_DisableIT_SSRU + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_SSRU(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_SSRUIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll RTC_CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1U : 0U); +} + +/** + * @brief Check if Wakeup timer interrupt is enabled or not + * @rmtoll RTC_CR WUTIE LL_RTC_IsEnabledIT_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)) ? 1U : 0U); +} + +/** + * @brief Check if Alarm B interrupt is enabled or not + * @rmtoll RTC_CR ALRBIE LL_RTC_IsEnabledIT_ALRB + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRB(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRBIE) == (RTC_CR_ALRBIE)) ? 1U : 0U); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll RTC_CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1U : 0U); +} + +/** + * @brief Check if SSR Underflow interrupt is enabled or not + * @rmtoll RTC_CR SSRUIE LL_RTC_IsEnabledIT_SSRU + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_SSRU(const RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_SSRUIE) == (RTC_CR_SSRUIE)) ? 1U : 0U); +} + +/** + * @brief Enable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_EnableIT_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Disable tamper 1 interrupt. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_DisableIT_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP1IE); +} + +/** + * @brief Enable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_EnableIT_TAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP2IE); +} + +/** + * @brief Disable tamper 2 interrupt. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_DisableIT_TAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP2IE); +} + +#if (RTC_TAMP_NB > 2U) +/** + * @brief Enable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_EnableIT_TAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP3IE); +} + +/** + * @brief Disable tamper 3 interrupt. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_DisableIT_TAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP3IE); +} + +/** + * @brief Enable tamper 4 interrupt. + * @rmtoll TAMP_IER TAMP4IE LL_RTC_EnableIT_TAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP4IE); +} + +/** + * @brief Disable tamper 4 interrupt. + * @rmtoll TAMP_IER TAMP4IE LL_RTC_DisableIT_TAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP4IE); +} + +/** + * @brief Enable tamper 5 interrupt. + * @rmtoll TAMP_IER TAMP5IE LL_RTC_EnableIT_TAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP5IE); +} + +/** + * @brief Disable tamper 5 interrupt. + * @rmtoll TAMP_IER TAMP5IE LL_RTC_DisableIT_TAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP5IE); +} + +/** + * @brief Enable tamper 6 interrupt. + * @rmtoll TAMP_IER TAMP6IE LL_RTC_EnableIT_TAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP6IE); +} + +/** + * @brief Disable tamper 6 interrupt. + * @rmtoll TAMP_IER TAMP6IE LL_RTC_DisableIT_TAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP6IE); +} +#endif /* (RTC_TAMP_NB > 2U) */ + +#if (RTC_TAMP_NB > 6U) +/** + * @brief Enable tamper 7 interrupt. + * @rmtoll TAMP_IER TAMP7IE LL_RTC_EnableIT_TAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP7IE); +} + +/** + * @brief Disable tamper 7 interrupt. + * @rmtoll TAMP_IER TAMP7IE LL_RTC_DisableIT_TAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP7IE); +} + +/** + * @brief Enable tamper 8 interrupt. + * @rmtoll TAMP_IER TAMP8IE LL_RTC_EnableIT_TAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_TAMP8IE); +} + +/** + * @brief Disable tamper 8 interrupt. + * @rmtoll TAMP_IER TAMP8IE LL_RTC_DisableIT_TAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_TAMP8IE); +} +#endif /* (RTC_TAMP_NB > 6U) */ + +/** + * @brief Enable internal tamper 1 interrupt. + * @rmtoll TAMP_IER ITAMP1IE LL_RTC_EnableIT_ITAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP1IE); +} + +/** + * @brief Disable internal tamper 1 interrupt. + * @rmtoll TAMP_IER ITAMP1IE LL_RTC_DisableIT_ITAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP1IE); +} + +/** + * @brief Enable internal tamper 2 interrupt. + * @rmtoll TAMP_IER ITAMP2IE LL_RTC_EnableIT_ITAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP2IE); +} + +/** + * @brief Disable internal tamper 2 interrupt. + * @rmtoll TAMP_IER ITAMP2IE LL_RTC_DisableIT_ITAMP2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP2IE); +} + +/** + * @brief Enable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_EnableIT_ITAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Disable internal tamper 3 interrupt. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_DisableIT_ITAMP3 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP3IE); +} + +/** + * @brief Enable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_EnableIT_ITAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Disable internal tamper 4 interrupt. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_DisableIT_ITAMP4 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP4IE); +} + +/** + * @brief Enable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_EnableIT_ITAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Disable internal tamper 5 interrupt. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_DisableIT_ITAMP5 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP5IE); +} + +/** + * @brief Enable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_EnableIT_ITAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP6IE); +} + +/** + * @brief Disable internal tamper 6 interrupt. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_DisableIT_ITAMP6 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP6IE); +} + +/** + * @brief Enable internal tamper 7 interrupt. + * @rmtoll TAMP_IER ITAMP7IE LL_RTC_EnableIT_ITAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP7IE); +} + +/** + * @brief Disable internal tamper 7 interrupt. + * @rmtoll TAMP_IER ITAMP7IE LL_RTC_DisableIT_ITAMP7 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP7IE); +} + +/** + * @brief Enable internal tamper 8 interrupt. + * @rmtoll TAMP_IER ITAMP8IE LL_RTC_EnableIT_ITAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP8IE); +} + +/** + * @brief Disable internal tamper 8 interrupt. + * @rmtoll TAMP_IER ITAMP8IE LL_RTC_DisableIT_ITAMP8 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP8IE); +} + +/** + * @brief Enable internal tamper 9 interrupt. + * @rmtoll TAMP_IER ITAMP9IE LL_RTC_EnableIT_ITAMP9 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP9(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP9IE); +} + +/** + * @brief Disable internal tamper 9 interrupt. + * @rmtoll TAMP_IER ITAMP9IE LL_RTC_DisableIT_ITAMP9 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP9(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP9IE); +} + +/** + * @brief Enable internal tamper 11 interrupt. + * @rmtoll TAMP_IER ITAMP11IE LL_RTC_EnableIT_ITAMP11 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP11(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP11IE); +} + +/** + * @brief Disable internal tamper 11 interrupt. + * @rmtoll TAMP_IER ITAMP11IE LL_RTC_DisableIT_ITAMP11 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP11(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP11IE); +} + +/** + * @brief Enable internal tamper 15 interrupt. + * @rmtoll TAMP_IER ITAMP15IE LL_RTC_EnableIT_ITAMP15 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ITAMP15(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + SET_BIT(TAMP->IER, TAMP_IER_ITAMP15IE); +} + +/** + * @brief Disable internal tamper 15 interrupt. + * @rmtoll TAMP_IER ITAMP15IE LL_RTC_DisableIT_ITAMP15 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ITAMP15(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + CLEAR_BIT(TAMP->IER, TAMP_IER_ITAMP15IE); +} + +/** + * @brief Check if tamper 1 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP1IE LL_RTC_IsEnabledIT_TAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP1IE) == (TAMP_IER_TAMP1IE)) ? 1U : 0U); +} + +/** + * @brief Check if tamper 2 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP2IE LL_RTC_IsEnabledIT_TAMP2 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP2IE) == (TAMP_IER_TAMP2IE)) ? 1U : 0U); +} + +#if (RTC_TAMP_NB > 2U) +/** + * @brief Check if tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP3IE LL_RTC_IsEnabledIT_TAMP3 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP3IE) == (TAMP_IER_TAMP3IE)) ? 1U : 0U); +} + +/** + * @brief Check if tamper 4 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP4IE LL_RTC_IsEnabledIT_TAMP4 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP4IE) == (TAMP_IER_TAMP4IE)) ? 1U : 0U); +} + +/** + * @brief Check if tamper 5 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP5IE LL_RTC_IsEnabledIT_TAMP5 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP5IE) == (TAMP_IER_TAMP5IE)) ? 1U : 0U); +} + +/** + * @brief Check if tamper 6 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP6IE LL_RTC_IsEnabledIT_TAMP6 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP6IE) == (TAMP_IER_TAMP6IE)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 2U) */ + +#if (RTC_TAMP_NB > 6U) +/** + * @brief Check if tamper 7 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP7IE LL_RTC_IsEnabledIT_TAMP7 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP7IE) == (TAMP_IER_TAMP7IE)) ? 1U : 0U); +} + +/** + * @brief Check if tamper 8 interrupt is enabled or not. + * @rmtoll TAMP_IER TAMP8IE LL_RTC_IsEnabledIT_TAMP8 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_TAMP8IE) == (TAMP_IER_TAMP8IE)) ? 1U : 0U); +} +#endif /* (RTC_TAMP_NB > 6U) */ + +/** + * @brief Check if internal tamper 1 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP1IE LL_RTC_IsEnabledIT_ITAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP1(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP1IE) == (TAMP_IER_ITAMP1IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 2 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP2IE LL_RTC_IsEnabledIT_ITAMP2 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP2(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP2IE) == (TAMP_IER_ITAMP2IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 3 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP3IE LL_RTC_IsEnabledIT_ITAMP3 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP3(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP3IE) == (TAMP_IER_ITAMP3IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 4 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP4IE LL_RTC_IsEnabledIT_ITAMP4 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP4(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP4IE) == (TAMP_IER_ITAMP4IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 5 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP5IE LL_RTC_IsEnabledIT_ITAMP5 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP5(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP5IE) == (TAMP_IER_ITAMP5IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 6 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP6IE LL_RTC_IsEnabledIT_ITAMP6 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP6(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP6IE) == (TAMP_IER_ITAMP6IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 7 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP7IE LL_RTC_IsEnabledIT_ITAMP7 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP7(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP7IE) == (TAMP_IER_ITAMP7IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 8 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP8IE LL_RTC_IsEnabledIT_ITAMP8 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP8(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP8IE) == (TAMP_IER_ITAMP8IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 9 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP9IE LL_RTC_IsEnabledIT_ITAMP9 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP9(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP9IE) == (TAMP_IER_ITAMP9IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 11 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP11IE LL_RTC_IsEnabledIT_ITAMP11 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP11(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP11IE) == (TAMP_IER_ITAMP11IE)) ? 1U : 0U); +} + +/** + * @brief Check if internal tamper 15 interrupt is enabled or not. + * @rmtoll TAMP_IER ITAMP15IE LL_RTC_IsEnabledIT_ITAMP15 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ITAMP15(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return ((READ_BIT(TAMP->IER, TAMP_IER_ITAMP15IE) == (TAMP_IER_ITAMP15IE)) ? 1U : 0U); +} + +/** + * @brief Increment Monotonic counter. + * @rmtoll TAMP_COUNT1R COUNT LL_RTC_IncrementMonotonicCounter + * @param RTCx RTC Instance + * @retval None. + */ +__STATIC_INLINE void LL_RTC_IncrementMonotonicCounter(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + WRITE_REG(TAMP->COUNT1R, 0U); +} + +/** + * @brief Increment Monotonic counter. + * @rmtoll TAMP_COUNT1R COUNT LL_RTC_GetMonotonicCounter + * @param RTCx RTC Instance + * @retval Monotonic counter value. + */ +__STATIC_INLINE uint32_t LL_RTC_GetMonotonicCounter(const RTC_TypeDef *RTCx) +{ + UNUSED(RTCx); + return READ_REG(TAMP->COUNT1R); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_RTC_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_sdmmc.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_sdmmc.h new file mode 100644 index 000000000..89ee12143 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_sdmmc.h @@ -0,0 +1,1164 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_sdmmc.h + * @author MCD Application Team + * @brief Header file of SDMMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_SDMMC_H +#define STM32H7RSxx_LL_SDMMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +/** @addtogroup STM32H7RSxx_Driver + * @{ + */ +#if defined (SDMMC1) || defined (SDMMC2) +/** @addtogroup SDMMC_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types + * @{ + */ + +/** + * @brief SDMMC Configuration Structure definition + */ +typedef struct +{ + uint32_t ClockEdge; /*!< Specifies the SDMMC_CCK clock transition on which Data and Command change. + This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ + + uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ + + uint32_t BusWide; /*!< Specifies the SDMMC bus width. + This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ + + uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ + + uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. + This parameter can be a value between Min_Data = 0 and Max_Data = 1023 */ + +#if (USE_SD_TRANSCEIVER != 0U) + uint32_t TranceiverPresent; /*!< Specifies if there is a 1V8 Transceiver/Switcher. + This parameter can be a value of @ref SDMMC_LL_TRANSCEIVER_PRESENT */ +#endif /* USE_SD_TRANSCEIVER */ +} SDMMC_InitTypeDef; + + +/** + * @brief SDMMC Command Control structure + */ +typedef struct +{ + uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register. */ + + uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and + Max_Data = 64 */ + + uint32_t Response; /*!< Specifies the SDMMC response type. + This parameter can be a value of @ref SDMMC_LL_Response_Type */ + + uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is + enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ + + uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_CPSM_State */ +} SDMMC_CmdInitTypeDef; + + +/** + * @brief SDMMC Data Control structure + */ +typedef struct +{ + uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ + + uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ + + uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ + + uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_DPSM_State */ +} SDMMC_DataInitTypeDef; + +/** @defgroup SDEx_Exported_Types_Group1 SD Card Internal DMA Buffer structure + * @{ + */ +typedef struct +{ + __IO uint32_t IDMALAR; /*!< SDMMC DMA linked list configuration register */ + __IO uint32_t IDMABASER; /*!< SDMMC DMA buffer base address register */ + __IO uint32_t IDMABSIZE; /*!< SDMMC DMA buffer size register */ +} SDMMC_DMALinkNodeTypeDef; + +typedef struct +{ + uint32_t BufferAddress; /*!< Node Buffer address */ + uint32_t BufferSize ; /*!< Node Buffer size */ +} SDMMC_DMALinkNodeConfTypeDef; + +typedef struct +{ + SDMMC_DMALinkNodeTypeDef *pHeadNode; /*!< Linked List Node Head */ + SDMMC_DMALinkNodeTypeDef *pTailNode; /*!< Linked List Node Head */ + uint32_t NodesCounter ; /*!< Node is ready for execution */ +} SDMMC_DMALinkedListTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants + * @{ + */ +#define SDMMC_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define SDMMC_ERROR_CMD_CRC_FAIL ((uint32_t)0x00000001U) /*!< Command response received (but CRC check failed) */ +#define SDMMC_ERROR_DATA_CRC_FAIL ((uint32_t)0x00000002U) /*!< Data block sent/received (CRC check failed) */ +#define SDMMC_ERROR_CMD_RSP_TIMEOUT ((uint32_t)0x00000004U) /*!< Command response timeout */ +#define SDMMC_ERROR_DATA_TIMEOUT ((uint32_t)0x00000008U) /*!< Data timeout */ +#define SDMMC_ERROR_TX_UNDERRUN ((uint32_t)0x00000010U) /*!< Transmit FIFO underrun */ +#define SDMMC_ERROR_RX_OVERRUN ((uint32_t)0x00000020U) /*!< Receive FIFO overrun */ +#define SDMMC_ERROR_ADDR_MISALIGNED ((uint32_t)0x00000040U) /*!< Misaligned address */ +#define SDMMC_ERROR_BLOCK_LEN_ERR ((uint32_t)0x00000080U) /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ +#define SDMMC_ERROR_ERASE_SEQ_ERR ((uint32_t)0x00000100U) /*!< An error in the sequence of erase command occurs */ +#define SDMMC_ERROR_BAD_ERASE_PARAM ((uint32_t)0x00000200U) /*!< An invalid selection for erase groups */ +#define SDMMC_ERROR_WRITE_PROT_VIOLATION ((uint32_t)0x00000400U) /*!< Attempt to program a write protect block */ +#define SDMMC_ERROR_LOCK_UNLOCK_FAILED ((uint32_t)0x00000800U) /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ +#define SDMMC_ERROR_COM_CRC_FAILED ((uint32_t)0x00001000U) /*!< CRC check of the previous command failed */ +#define SDMMC_ERROR_ILLEGAL_CMD ((uint32_t)0x00002000U) /*!< Command is not legal for the card state */ +#define SDMMC_ERROR_CARD_ECC_FAILED ((uint32_t)0x00004000U) /*!< Card internal ECC was applied but failed to correct the data */ +#define SDMMC_ERROR_CC_ERR ((uint32_t)0x00008000U) /*!< Internal card controller error */ +#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR ((uint32_t)0x00010000U) /*!< General or unknown error */ +#define SDMMC_ERROR_STREAM_READ_UNDERRUN ((uint32_t)0x00020000U) /*!< The card could not sustain data reading in stream rmode */ +#define SDMMC_ERROR_STREAM_WRITE_OVERRUN ((uint32_t)0x00040000U) /*!< The card could not sustain data programming in stream mode */ +#define SDMMC_ERROR_CID_CSD_OVERWRITE ((uint32_t)0x00080000U) /*!< CID/CSD overwrite error */ +#define SDMMC_ERROR_WP_ERASE_SKIP ((uint32_t)0x00100000U) /*!< Only partial address space was erased */ +#define SDMMC_ERROR_CARD_ECC_DISABLED ((uint32_t)0x00200000U) /*!< Command has been executed without using internal ECC */ +#define SDMMC_ERROR_ERASE_RESET ((uint32_t)0x00400000U) /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ +#define SDMMC_ERROR_AKE_SEQ_ERR ((uint32_t)0x00800000U) /*!< Error in sequence of authentication */ +#define SDMMC_ERROR_INVALID_VOLTRANGE ((uint32_t)0x01000000U) /*!< Error in case of invalid voltage range */ +#define SDMMC_ERROR_ADDR_OUT_OF_RANGE ((uint32_t)0x02000000U) /*!< Error when addressed block is out of range */ +#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE ((uint32_t)0x04000000U) /*!< Error when command request is not applicable */ +#define SDMMC_ERROR_INVALID_PARAMETER ((uint32_t)0x08000000U) /*!< the used parameter is not valid */ +#define SDMMC_ERROR_UNSUPPORTED_FEATURE ((uint32_t)0x10000000U) /*!< Error when feature is not insupported */ +#define SDMMC_ERROR_BUSY ((uint32_t)0x20000000U) /*!< Error when transfer process is busy */ +#define SDMMC_ERROR_DMA ((uint32_t)0x40000000U) /*!< Error while DMA transfer */ +#define SDMMC_ERROR_TIMEOUT ((uint32_t)0x80000000U) /*!< Timeout error */ + +/** + * @brief SDMMC Commands Index + */ +#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */ +#define SDMMC_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */ +#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ +#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */ +#define SDMMC_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */ +#define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line.*/ +#define SDMMC_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ +#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */ +#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information and asks the card whether card supports voltage. */ +#define SDMMC_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ +#define SDMMC_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */ +#define SDMMC_CMD_VOLTAGE_SWITCH ((uint8_t)11U) /*!< SD card Voltage switch to 1.8V mode. */ +#define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */ +#define SDMMC_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */ +#define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14U) /*!< Reserved */ +#define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */ +#define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands (read, write, lock). Default block length is fixed to 512 Bytes. Not effective */ +/*!< for SDHS and SDXC. */ +#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by STOP_TRANSMISSION command. */ +#define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ +#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */ +#define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */ +#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ +#define SDMMC_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */ +#define SDMMC_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */ +#define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */ +#define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */ +#define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */ +#define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */ +#define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */ +#define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased. Reserved for each command system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */ +#define SDMMC_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by the SET_BLOCK_LEN command. */ +#define SDMMC_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather than a standard command. */ +#define SDMMC_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card for general purpose/application specific commands. */ +#define SDMMC_CMD_NO_CMD ((uint8_t)64U) /*!< No command */ + +/** + * @brief Following commands are SD Card Specific commands. + * SDMMC_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus widths are given in SCR register. */ +#define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */ +#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with 32bit+CRC data block. */ +#define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ +#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ +#define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */ +#define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */ +#define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */ + +/** + * @brief Following commands are MMC Specific commands. + */ +#define SDMMC_CMD_MMC_SLEEP_AWAKE ((uint8_t)5U) /*!< Toggle the device between Sleep state and Standby state. */ + +/** + * @brief Following commands are SD Card Specific security commands. + * SDMMC_CMD_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43U) +#define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44U) +#define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U) +#define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U) +#define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U) +#define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U) +#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U) +#define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U) +#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U) + +/** + * @brief Masks for errors Card Status R1 (OCR Register) + */ +#define SDMMC_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U) +#define SDMMC_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U) +#define SDMMC_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U) +#define SDMMC_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U) +#define SDMMC_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U) +#define SDMMC_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U) +#define SDMMC_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U) +#define SDMMC_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U) +#define SDMMC_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U) +#define SDMMC_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U) +#define SDMMC_OCR_CC_ERROR ((uint32_t)0x00100000U) +#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U) +#define SDMMC_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U) +#define SDMMC_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U) +#define SDMMC_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U) +#define SDMMC_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U) +#define SDMMC_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U) +#define SDMMC_OCR_ERASE_RESET ((uint32_t)0x00002000U) +#define SDMMC_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U) +#define SDMMC_OCR_ERRORBITS ((uint32_t)0xFDFFE008U) + +/** + * @brief Masks for R6 Response + */ +#define SDMMC_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U) +#define SDMMC_R6_ILLEGAL_CMD ((uint32_t)0x00004000U) +#define SDMMC_R6_COM_CRC_FAILED ((uint32_t)0x00008000U) + +#define SDMMC_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U) +#define SDMMC_HIGH_CAPACITY ((uint32_t)0x40000000U) +#define SDMMC_STD_CAPACITY ((uint32_t)0x00000000U) +#define SDMMC_CHECK_PATTERN ((uint32_t)0x000001AAU) +#define SD_SWITCH_1_8V_CAPACITY ((uint32_t)0x01000000U) +#define SDMMC_DDR50_SWITCH_PATTERN ((uint32_t)0x80FFFF04U) +#define SDMMC_SDR104_SWITCH_PATTERN ((uint32_t)0x80FF1F03U) +#define SDMMC_SDR50_SWITCH_PATTERN ((uint32_t)0x80FF1F02U) +#define SDMMC_SDR25_SWITCH_PATTERN ((uint32_t)0x80FFFF01U) +#define SDMMC_SDR12_SWITCH_PATTERN ((uint32_t)0x80FFFF00U) + +#define SDMMC_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU) + +#define SDMMC_MAX_TRIAL ((uint32_t)0x0000FFFFU) + +#define SDMMC_ALLZERO ((uint32_t)0x00000000U) + +#define SDMMC_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U) +#define SDMMC_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U) +#define SDMMC_CARD_LOCKED ((uint32_t)0x02000000U) + +#ifndef SDMMC_DATATIMEOUT /*Hardware Data Timeout (ms) */ +#define SDMMC_DATATIMEOUT ((uint32_t)0xFFFFFFFFU) +#endif /* SDMMC_DATATIMEOUT */ + +#ifndef SDMMC_SWDATATIMEOUT /*Software Data Timeout (ms) */ +#define SDMMC_SWDATATIMEOUT SDMMC_DATATIMEOUT +#endif /* SDMMC_SWDATATIMEOUT */ + +#define SDMMC_0TO7BITS ((uint32_t)0x000000FFU) +#define SDMMC_8TO15BITS ((uint32_t)0x0000FF00U) +#define SDMMC_16TO23BITS ((uint32_t)0x00FF0000U) +#define SDMMC_24TO31BITS ((uint32_t)0xFF000000U) +#define SDMMC_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU) + +#define SDMMC_HALFFIFO ((uint32_t)0x00000008U) +#define SDMMC_HALFFIFOBYTES ((uint32_t)0x00000020U) + +/* SDMMC FIFO Size */ +#define SDMMC_FIFO_SIZE 32U +/** + * @brief Command Class supported + */ +#define SDMMC_CCCC_ERASE ((uint32_t)0x00000020U) + +#define SDMMC_CMDTIMEOUT ((uint32_t)5000U) /* Command send and response timeout */ +#define SDMMC_MAXERASETIMEOUT ((uint32_t)63000U) /* Max erase Timeout 63 s */ +#define SDMMC_STOPTRANSFERTIMEOUT ((uint32_t)100000000U) /* Timeout for STOP TRANSMISSION command */ + +/** @defgroup SDMMC_LL_Clock_Edge Clock Edge + * @{ + */ +#define SDMMC_CLOCK_EDGE_RISING ((uint32_t)0x00000000U) +#define SDMMC_CLOCK_EDGE_FALLING SDMMC_CLKCR_NEGEDGE + +#define IS_SDMMC_CLOCK_EDGE(EDGE) (((EDGE) == SDMMC_CLOCK_EDGE_RISING) || \ + ((EDGE) == SDMMC_CLOCK_EDGE_FALLING)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Clock_Power_Save Clock Power Saving + * @{ + */ +#define SDMMC_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_CLOCK_POWER_SAVE_ENABLE SDMMC_CLKCR_PWRSAV + +#define IS_SDMMC_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDMMC_CLOCK_POWER_SAVE_DISABLE) || \ + ((SAVE) == SDMMC_CLOCK_POWER_SAVE_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Bus_Wide Bus Width + * @{ + */ +#define SDMMC_BUS_WIDE_1B ((uint32_t)0x00000000U) +#define SDMMC_BUS_WIDE_4B SDMMC_CLKCR_WIDBUS_0 +#define SDMMC_BUS_WIDE_8B SDMMC_CLKCR_WIDBUS_1 + +#define IS_SDMMC_BUS_WIDE(WIDE) (((WIDE) == SDMMC_BUS_WIDE_1B) || \ + ((WIDE) == SDMMC_BUS_WIDE_4B) || \ + ((WIDE) == SDMMC_BUS_WIDE_8B)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Speed_Mode + * @{ + */ +#define SDMMC_SPEED_MODE_AUTO ((uint32_t)0x00000000U) +#define SDMMC_SPEED_MODE_DEFAULT ((uint32_t)0x00000001U) +#define SDMMC_SPEED_MODE_HIGH ((uint32_t)0x00000002U) +#define SDMMC_SPEED_MODE_ULTRA ((uint32_t)0x00000003U) +#define SDMMC_SPEED_MODE_ULTRA_SDR104 SDMMC_SPEED_MODE_ULTRA +#define SDMMC_SPEED_MODE_DDR ((uint32_t)0x00000004U) +#define SDMMC_SPEED_MODE_ULTRA_SDR50 ((uint32_t)0x00000005U) + +#define IS_SDMMC_SPEED_MODE(MODE) (((MODE) == SDMMC_SPEED_MODE_AUTO) || \ + ((MODE) == SDMMC_SPEED_MODE_DEFAULT) || \ + ((MODE) == SDMMC_SPEED_MODE_HIGH) || \ + ((MODE) == SDMMC_SPEED_MODE_ULTRA) || \ + ((MODE) == SDMMC_SPEED_MODE_ULTRA_SDR50) || \ + ((MODE) == SDMMC_SPEED_MODE_DDR)) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Hardware_Flow_Control Hardware Flow Control + * @{ + */ +#define SDMMC_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_HARDWARE_FLOW_CONTROL_ENABLE SDMMC_CLKCR_HWFC_EN + +#define IS_SDMMC_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_DISABLE) || \ + ((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Clock_Division Clock Division + * @{ + */ +/* SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV] */ +#define IS_SDMMC_CLKDIV(DIV) ((DIV) < 0x400U) +/** + * @} + */ + +/** @defgroup SDMMC_LL_TRANSCEIVER_PRESENT Transceiver Present + * @{ + */ +#define SDMMC_TRANSCEIVER_UNKNOWN ((uint32_t)0x00000000U) +#define SDMMC_TRANSCEIVER_NOT_PRESENT ((uint32_t)0x00000001U) +#define SDMMC_TRANSCEIVER_PRESENT ((uint32_t)0x00000002U) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Command_Index Command Index + * @{ + */ +#define IS_SDMMC_CMD_INDEX(INDEX) ((INDEX) < 0x40U) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Response_Type Response Type + * @{ + */ +#define SDMMC_RESPONSE_NO ((uint32_t)0x00000000U) +#define SDMMC_RESPONSE_SHORT SDMMC_CMD_WAITRESP_0 +#define SDMMC_RESPONSE_LONG SDMMC_CMD_WAITRESP + +#define IS_SDMMC_RESPONSE(RESPONSE) (((RESPONSE) == SDMMC_RESPONSE_NO) || \ + ((RESPONSE) == SDMMC_RESPONSE_SHORT) || \ + ((RESPONSE) == SDMMC_RESPONSE_LONG)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Wait_Interrupt_State Wait Interrupt + * @{ + */ +#define SDMMC_WAIT_NO ((uint32_t)0x00000000U) +#define SDMMC_WAIT_IT SDMMC_CMD_WAITINT +#define SDMMC_WAIT_PEND SDMMC_CMD_WAITPEND + +#define IS_SDMMC_WAIT(WAIT) (((WAIT) == SDMMC_WAIT_NO) || \ + ((WAIT) == SDMMC_WAIT_IT) || \ + ((WAIT) == SDMMC_WAIT_PEND)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_CPSM_State CPSM State + * @{ + */ +#define SDMMC_CPSM_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_CPSM_ENABLE SDMMC_CMD_CPSMEN + +#define IS_SDMMC_CPSM(CPSM) (((CPSM) == SDMMC_CPSM_DISABLE) || \ + ((CPSM) == SDMMC_CPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Response_Registers Response Register + * @{ + */ +#define SDMMC_RESP1 ((uint32_t)0x00000000U) +#define SDMMC_RESP2 ((uint32_t)0x00000004U) +#define SDMMC_RESP3 ((uint32_t)0x00000008U) +#define SDMMC_RESP4 ((uint32_t)0x0000000CU) + +#define IS_SDMMC_RESP(RESP) (((RESP) == SDMMC_RESP1) || \ + ((RESP) == SDMMC_RESP2) || \ + ((RESP) == SDMMC_RESP3) || \ + ((RESP) == SDMMC_RESP4)) + +/** @defgroup SDMMC_Internal_DMA_Mode SDMMC Internal DMA Mode + * @{ + */ +#define SDMMC_DISABLE_IDMA ((uint32_t)0x00000000) +#define SDMMC_ENABLE_IDMA_SINGLE_BUFF (SDMMC_IDMA_IDMAEN) +#define SDMMC_ENABLE_IDMA_DOUBLE_BUFF0 (SDMMC_IDMA_IDMAEN | SDMMC_IDMA_IDMABMODE) +#define SDMMC_ENABLE_IDMA_DOUBLE_BUFF1 (SDMMC_IDMA_IDMAEN | SDMMC_IDMA_IDMABMODE | SDMMC_IDMA_IDMABACT) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Data_Length Data Length + * @{ + */ +#define IS_SDMMC_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Data_Block_Size Data Block Size + * @{ + */ +#define SDMMC_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U) +#define SDMMC_DATABLOCK_SIZE_2B SDMMC_DCTRL_DBLOCKSIZE_0 +#define SDMMC_DATABLOCK_SIZE_4B SDMMC_DCTRL_DBLOCKSIZE_1 +#define SDMMC_DATABLOCK_SIZE_8B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_1) +#define SDMMC_DATABLOCK_SIZE_16B SDMMC_DCTRL_DBLOCKSIZE_2 +#define SDMMC_DATABLOCK_SIZE_32B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_64B (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_128B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_256B SDMMC_DCTRL_DBLOCKSIZE_3 +#define SDMMC_DATABLOCK_SIZE_512B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_1024B (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_2048B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_4096B (SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_8192B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_16384B (SDMMC_DCTRL_DBLOCKSIZE_1| \ + SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) + +#define IS_SDMMC_BLOCK_SIZE(SIZE) (((SIZE) == SDMMC_DATABLOCK_SIZE_1B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_2B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_4B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_8B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_16B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_32B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_64B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_128B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_256B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_512B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_1024B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_2048B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_4096B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_8192B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_16384B)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Transfer_Direction Transfer Direction + * @{ + */ +#define SDMMC_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U) +#define SDMMC_TRANSFER_DIR_TO_SDMMC SDMMC_DCTRL_DTDIR + +#define IS_SDMMC_TRANSFER_DIR(DIR) (((DIR) == SDMMC_TRANSFER_DIR_TO_CARD) || \ + ((DIR) == SDMMC_TRANSFER_DIR_TO_SDMMC)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Transfer_Type Transfer Type + * @{ + */ +#define SDMMC_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U) +#define SDMMC_TRANSFER_MODE_SDIO SDMMC_DCTRL_DTMODE_0 +#define SDMMC_TRANSFER_MODE_STREAM SDMMC_DCTRL_DTMODE_1 + +#define IS_SDMMC_TRANSFER_MODE(MODE) (((MODE) == SDMMC_TRANSFER_MODE_BLOCK) || \ + ((MODE) == SDMMC_TRANSFER_MODE_SDIO) || \ + ((MODE) == SDMMC_TRANSFER_MODE_STREAM)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_DPSM_State DPSM State + * @{ + */ +#define SDMMC_DPSM_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_DPSM_ENABLE SDMMC_DCTRL_DTEN + +#define IS_SDMMC_DPSM(DPSM) (((DPSM) == SDMMC_DPSM_DISABLE) ||\ + ((DPSM) == SDMMC_DPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Read_Wait_Mode Read Wait Mode + * @{ + */ +#define SDMMC_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U) +#define SDMMC_READ_WAIT_MODE_CLK (SDMMC_DCTRL_RWMOD) + +#define IS_SDMMC_READWAIT_MODE(MODE) (((MODE) == SDMMC_READ_WAIT_MODE_CLK) || \ + ((MODE) == SDMMC_READ_WAIT_MODE_DATA2)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Interrupt_sources Interrupt Sources + * @{ + */ +#define SDMMC_IT_CCRCFAIL SDMMC_MASK_CCRCFAILIE +#define SDMMC_IT_DCRCFAIL SDMMC_MASK_DCRCFAILIE +#define SDMMC_IT_CTIMEOUT SDMMC_MASK_CTIMEOUTIE +#define SDMMC_IT_DTIMEOUT SDMMC_MASK_DTIMEOUTIE +#define SDMMC_IT_TXUNDERR SDMMC_MASK_TXUNDERRIE +#define SDMMC_IT_RXOVERR SDMMC_MASK_RXOVERRIE +#define SDMMC_IT_CMDREND SDMMC_MASK_CMDRENDIE +#define SDMMC_IT_CMDSENT SDMMC_MASK_CMDSENTIE +#define SDMMC_IT_DATAEND SDMMC_MASK_DATAENDIE +#define SDMMC_IT_DHOLD SDMMC_MASK_DHOLDIE +#define SDMMC_IT_DBCKEND SDMMC_MASK_DBCKENDIE +#define SDMMC_IT_DABORT SDMMC_MASK_DABORTIE +#define SDMMC_IT_TXFIFOHE SDMMC_MASK_TXFIFOHEIE +#define SDMMC_IT_RXFIFOHF SDMMC_MASK_RXFIFOHFIE +#define SDMMC_IT_RXFIFOF SDMMC_MASK_RXFIFOFIE +#define SDMMC_IT_TXFIFOE SDMMC_MASK_TXFIFOEIE +#define SDMMC_IT_BUSYD0END SDMMC_MASK_BUSYD0ENDIE +#define SDMMC_IT_SDIOIT SDMMC_MASK_SDIOITIE +#define SDMMC_IT_ACKFAIL SDMMC_MASK_ACKFAILIE +#define SDMMC_IT_ACKTIMEOUT SDMMC_MASK_ACKTIMEOUTIE +#define SDMMC_IT_VSWEND SDMMC_MASK_VSWENDIE +#define SDMMC_IT_CKSTOP SDMMC_MASK_CKSTOPIE +#define SDMMC_IT_IDMABTC SDMMC_MASK_IDMABTCIE +/** + * @} + */ + +/** @defgroup SDMMC_LL_Flags Flags + * @{ + */ +#define SDMMC_FLAG_CCRCFAIL SDMMC_STA_CCRCFAIL +#define SDMMC_FLAG_DCRCFAIL SDMMC_STA_DCRCFAIL +#define SDMMC_FLAG_CTIMEOUT SDMMC_STA_CTIMEOUT +#define SDMMC_FLAG_DTIMEOUT SDMMC_STA_DTIMEOUT +#define SDMMC_FLAG_TXUNDERR SDMMC_STA_TXUNDERR +#define SDMMC_FLAG_RXOVERR SDMMC_STA_RXOVERR +#define SDMMC_FLAG_CMDREND SDMMC_STA_CMDREND +#define SDMMC_FLAG_CMDSENT SDMMC_STA_CMDSENT +#define SDMMC_FLAG_DATAEND SDMMC_STA_DATAEND +#define SDMMC_FLAG_DHOLD SDMMC_STA_DHOLD +#define SDMMC_FLAG_DBCKEND SDMMC_STA_DBCKEND +#define SDMMC_FLAG_DABORT SDMMC_STA_DABORT +#define SDMMC_FLAG_DPSMACT SDMMC_STA_DPSMACT +#define SDMMC_FLAG_CMDACT SDMMC_STA_CPSMACT +#define SDMMC_FLAG_TXFIFOHE SDMMC_STA_TXFIFOHE +#define SDMMC_FLAG_RXFIFOHF SDMMC_STA_RXFIFOHF +#define SDMMC_FLAG_TXFIFOF SDMMC_STA_TXFIFOF +#define SDMMC_FLAG_RXFIFOF SDMMC_STA_RXFIFOF +#define SDMMC_FLAG_TXFIFOE SDMMC_STA_TXFIFOE +#define SDMMC_FLAG_RXFIFOE SDMMC_STA_RXFIFOE +#define SDMMC_FLAG_BUSYD0 SDMMC_STA_BUSYD0 +#define SDMMC_FLAG_BUSYD0END SDMMC_STA_BUSYD0END +#define SDMMC_FLAG_SDIOIT SDMMC_STA_SDIOIT +#define SDMMC_FLAG_ACKFAIL SDMMC_STA_ACKFAIL +#define SDMMC_FLAG_ACKTIMEOUT SDMMC_STA_ACKTIMEOUT +#define SDMMC_FLAG_VSWEND SDMMC_STA_VSWEND +#define SDMMC_FLAG_CKSTOP SDMMC_STA_CKSTOP +#define SDMMC_FLAG_IDMATE SDMMC_STA_IDMATE +#define SDMMC_FLAG_IDMABTC SDMMC_STA_IDMABTC + +#define SDMMC_STATIC_FLAGS ((uint32_t)(SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_CTIMEOUT |\ + SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_RXOVERR |\ + SDMMC_FLAG_CMDREND | SDMMC_FLAG_CMDSENT | SDMMC_FLAG_DATAEND |\ + SDMMC_FLAG_DHOLD | SDMMC_FLAG_DBCKEND | SDMMC_FLAG_DABORT |\ + SDMMC_FLAG_BUSYD0END | SDMMC_FLAG_SDIOIT | SDMMC_FLAG_ACKFAIL |\ + SDMMC_FLAG_ACKTIMEOUT | SDMMC_FLAG_VSWEND | SDMMC_FLAG_CKSTOP |\ + SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC)) + +#define SDMMC_STATIC_CMD_FLAGS ((uint32_t)(SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CTIMEOUT | SDMMC_FLAG_CMDREND |\ + SDMMC_FLAG_CMDSENT | SDMMC_FLAG_BUSYD0END)) + +#define SDMMC_STATIC_DATA_FLAGS ((uint32_t)(SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_TXUNDERR |\ + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DATAEND | SDMMC_FLAG_DHOLD |\ + SDMMC_FLAG_DBCKEND | SDMMC_FLAG_DABORT | SDMMC_FLAG_IDMATE |\ + SDMMC_FLAG_IDMABTC)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros + * @{ + */ + +/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions + * @brief SDMMC_LL registers bit address in the alias region + * @{ + */ +/* ---------------------- SDMMC registers bit mask --------------------------- */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)(SDMMC_CLKCR_CLKDIV | SDMMC_CLKCR_PWRSAV |\ + SDMMC_CLKCR_WIDBUS |\ + SDMMC_CLKCR_NEGEDGE | SDMMC_CLKCR_HWFC_EN |\ + SDMMC_CLKCR_DDR | SDMMC_CLKCR_BUSSPEED |\ + SDMMC_CLKCR_SELCLKRX)) + +/* --- DCTRL Register ---*/ +/* SDMMC DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)(SDMMC_DCTRL_DTEN | SDMMC_DCTRL_DTDIR |\ + SDMMC_DCTRL_DTMODE | SDMMC_DCTRL_DBLOCKSIZE)) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)(SDMMC_CMD_CMDINDEX | SDMMC_CMD_WAITRESP |\ + SDMMC_CMD_WAITINT | SDMMC_CMD_WAITPEND |\ + SDMMC_CMD_CPSMEN | SDMMC_CMD_CMDSUSPEND)) + +/* SDMMC Initialization Frequency (400KHz max) for Peripheral CLK 200MHz*/ +#define SDMMC_INIT_CLK_DIV ((uint8_t)0xFA) + +/* SDMMC Default Speed Frequency (25Mhz max) for Peripheral CLK 200MHz*/ +#define SDMMC_NSPEED_CLK_DIV ((uint8_t)0x4) + +/* SDMMC High Speed Frequency (50Mhz max) for Peripheral CLK 200MHz*/ +#define SDMMC_HSPEED_CLK_DIV ((uint8_t)0x2) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SDMMC device interrupt. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) + +/** + * @brief Disable the SDMMC device interrupt. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified SDMMC flag is set or not. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of SDMMC_FLAG (SET or RESET). + */ +#define __SDMMC_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != 0U) + + +/** + * @brief Clears the SDMMC pending flags. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __SDMMC_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) + +/** + * @brief Checks whether the specified SDMMC interrupt has occurred or not. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of SDMMC_IT (SET or RESET). + */ +#define __SDMMC_GET_IT(__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the SDMMC's interrupt pending bits. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_START_READWAIT_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTART) + +/** + * @brief Disable Start the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_START_READWAIT_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTART) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_STOP_READWAIT_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTOP) + +/** + * @brief Disable Stop the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_STOP_READWAIT_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTOP) + +/** + * @brief Enable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_OPERATION_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_SDIOEN) + +/** + * @brief Disable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_OPERATION_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_SDIOEN) + +/** + * @brief Enable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_SUSPEND_CMD_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDSUSPEND) + +/** + * @brief Disable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_SUSPEND_CMD_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDSUSPEND) + +/** + * @brief Enable the CMDTRANS mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDTRANS_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDTRANS) + +/** + * @brief Disable the CMDTRANS mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDTRANS_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDTRANS) + +/** + * @brief Enable the CMDSTOP mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDSTOP_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDSTOP) + +/** + * @brief Disable the CMDSTOP mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDSTOP_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDSTOP) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDMMC_LL_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +/** @addtogroup HAL_SDMMC_LL_Group1 + * @{ + */ +HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group2 + * @{ + */ +uint32_t SDMMC_ReadFIFO(const SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group3 + * @{ + */ +HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_PowerState_Cycle(SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetPowerState(const SDMMC_TypeDef *SDMMCx); + +/* Command path state machine (CPSM) management functions */ +HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command); +uint8_t SDMMC_GetCommandResponse(const SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetResponse(const SDMMC_TypeDef *SDMMCx, uint32_t Response); + +/* Data path state machine (DPSM) management functions */ +HAL_StatusTypeDef SDMMC_ConfigData(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef *Data); +uint32_t SDMMC_GetDataCounter(const SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetFIFOCount(const SDMMC_TypeDef *SDMMCx); + +/* SDMMC Cards mode management functions */ +HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode); +/** + * @} + */ + +/* SDMMC Commands management functions ******************************************/ +/** @addtogroup HAL_SDMMC_LL_Group4 + * @{ + */ +uint32_t SDMMC_CmdBlockLength(SDMMC_TypeDef *SDMMCx, uint32_t BlockSize); +uint32_t SDMMC_CmdReadSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd); +uint32_t SDMMC_CmdReadMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd); +uint32_t SDMMC_CmdWriteSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd); +uint32_t SDMMC_CmdWriteMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd); +uint32_t SDMMC_CmdEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd); +uint32_t SDMMC_CmdSDEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd); +uint32_t SDMMC_CmdEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd); +uint32_t SDMMC_CmdSDEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd); +uint32_t SDMMC_CmdErase(SDMMC_TypeDef *SDMMCx, uint32_t EraseType); +uint32_t SDMMC_CmdStopTransfer(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSelDesel(SDMMC_TypeDef *SDMMCx, uint32_t Addr); +uint32_t SDMMC_CmdGoIdleState(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdOperCond(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdAppCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdAppOperCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdBusWidth(SDMMC_TypeDef *SDMMCx, uint32_t BusWidth); +uint32_t SDMMC_CmdSendSCR(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSendCID(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSendCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSetRelAdd(SDMMC_TypeDef *SDMMCx, uint16_t *pRCA); +uint32_t SDMMC_CmdSetRelAddMmc(SDMMC_TypeDef *SDMMCx, uint16_t RCA); +uint32_t SDMMC_CmdSleepMmc(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSendStatus(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdStatusRegister(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdVoltageSwitch(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdOpCondition(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSwitch(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSendEXTCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdBlockCount(SDMMC_TypeDef *SDMMCx, uint32_t BlockCount); +/** + * @} + */ + +/* SDMMC Responses management functions *****************************************/ +/** @addtogroup HAL_SDMMC_LL_Group5 + * @{ + */ +uint32_t SDMMC_GetCmdResp1(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint32_t Timeout); +uint32_t SDMMC_GetCmdResp2(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetCmdResp3(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetCmdResp6(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint16_t *pRCA); +uint32_t SDMMC_GetCmdResp7(SDMMC_TypeDef *SDMMCx); +/** + * @} + */ + +/* Linked List functions *******************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group6 + * @{ + */ +uint32_t SDMMC_DMALinkedList_BuildNode(SDMMC_DMALinkNodeTypeDef *pNode, SDMMC_DMALinkNodeConfTypeDef *pNodeConf); +uint32_t SDMMC_DMALinkedList_InsertNode(SDMMC_DMALinkedListTypeDef *pLinkedList, SDMMC_DMALinkNodeTypeDef *pPrevNode, + SDMMC_DMALinkNodeTypeDef *pNode); +uint32_t SDMMC_DMALinkedList_RemoveNode(SDMMC_DMALinkedListTypeDef *pLinkedList, SDMMC_DMALinkNodeTypeDef *pNode); +uint32_t SDMMC_DMALinkedList_LockNode(SDMMC_DMALinkNodeTypeDef *pNode); +uint32_t SDMMC_DMALinkedList_UnlockNode(SDMMC_DMALinkNodeTypeDef *pNode); +uint32_t SDMMC_DMALinkedList_EnableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList); +uint32_t SDMMC_DMALinkedList_DisableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SDMMC1 || SDMMC2 */ +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_SDMMC_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_spi.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_spi.h new file mode 100644 index 000000000..4f450856f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_spi.h @@ -0,0 +1,3662 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_SPI_H +#define STM32H7RSxx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Macros SPI Private Macros + * @{ + */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) + or by software using the SSI bit. + + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure + the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. + The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions + @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 + and Max_Data = 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXP (SPI_SR_RXP) +#define LL_SPI_SR_TXP (SPI_SR_TXP) +#define LL_SPI_SR_DXP (SPI_SR_DXP) +#define LL_SPI_SR_EOT (SPI_SR_EOT) +#define LL_SPI_SR_TXTF (SPI_SR_TXTF) +#define LL_SPI_SR_UDR (SPI_SR_UDR) +#define LL_SPI_SR_CRCE (SPI_SR_CRCE) +#define LL_SPI_SR_MODF (SPI_SR_MODF) +#define LL_SPI_SR_OVR (SPI_SR_OVR) +#define LL_SPI_SR_TIFRE (SPI_SR_TIFRE) +#define LL_SPI_SR_SUSP (SPI_SR_SUSP) +#define LL_SPI_SR_TXC (SPI_SR_TXC) +#define LL_SPI_SR_RXWNE (SPI_SR_RXWNE) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_IER_RXPIE (SPI_IER_RXPIE) +#define LL_SPI_IER_TXPIE (SPI_IER_TXPIE) +#define LL_SPI_IER_DXPIE (SPI_IER_DXPIE) +#define LL_SPI_IER_EOTIE (SPI_IER_EOTIE) +#define LL_SPI_IER_TXTFIE (SPI_IER_TXTFIE) +#define LL_SPI_IER_UDRIE (SPI_IER_UDRIE) +#define LL_SPI_IER_OVRIE (SPI_IER_OVRIE) +#define LL_SPI_IER_CRCEIE (SPI_IER_CRCEIE) +#define LL_SPI_IER_TIFREIE (SPI_IER_TIFREIE) +#define LL_SPI_IER_MODFIE (SPI_IER_MODFIE) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CFG2_MASTER) +#define LL_SPI_MODE_SLAVE (0x00000000UL) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_SS_LEVEL SS Level + * @{ + */ +#define LL_SPI_SS_LEVEL_HIGH (SPI_CR1_SSI) +#define LL_SPI_SS_LEVEL_LOW (0x00000000UL) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_SS_IDLENESS SS Idleness + * @{ + */ +#define LL_SPI_SS_IDLENESS_00CYCLE (0x00000000UL) +#define LL_SPI_SS_IDLENESS_01CYCLE (SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_02CYCLE (SPI_CFG2_MSSI_1) +#define LL_SPI_SS_IDLENESS_03CYCLE (SPI_CFG2_MSSI_0 | SPI_CFG2_MSSI_1) +#define LL_SPI_SS_IDLENESS_04CYCLE (SPI_CFG2_MSSI_2) +#define LL_SPI_SS_IDLENESS_05CYCLE (SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_06CYCLE (SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_1) +#define LL_SPI_SS_IDLENESS_07CYCLE (SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_1 | SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_08CYCLE (SPI_CFG2_MSSI_3) +#define LL_SPI_SS_IDLENESS_09CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_10CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_1) +#define LL_SPI_SS_IDLENESS_11CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_1 | SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_12CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_2) +#define LL_SPI_SS_IDLENESS_13CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_0) +#define LL_SPI_SS_IDLENESS_14CYCLE (SPI_CFG2_MSSI_3 | SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_1) +#define LL_SPI_SS_IDLENESS_15CYCLE (SPI_CFG2_MSSI_3\ + | SPI_CFG2_MSSI_2 | SPI_CFG2_MSSI_1 | SPI_CFG2_MSSI_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_ID_IDLENESS Master Inter-Data Idleness + * @{ + */ +#define LL_SPI_ID_IDLENESS_00CYCLE (0x00000000UL) +#define LL_SPI_ID_IDLENESS_01CYCLE (SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_02CYCLE (SPI_CFG2_MIDI_1) +#define LL_SPI_ID_IDLENESS_03CYCLE (SPI_CFG2_MIDI_0 | SPI_CFG2_MIDI_1) +#define LL_SPI_ID_IDLENESS_04CYCLE (SPI_CFG2_MIDI_2) +#define LL_SPI_ID_IDLENESS_05CYCLE (SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_06CYCLE (SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_1) +#define LL_SPI_ID_IDLENESS_07CYCLE (SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_1 | SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_08CYCLE (SPI_CFG2_MIDI_3) +#define LL_SPI_ID_IDLENESS_09CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_10CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_1) +#define LL_SPI_ID_IDLENESS_11CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_1 | SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_12CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_2) +#define LL_SPI_ID_IDLENESS_13CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_0) +#define LL_SPI_ID_IDLENESS_14CYCLE (SPI_CFG2_MIDI_3 | SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_1) +#define LL_SPI_ID_IDLENESS_15CYCLE (SPI_CFG2_MIDI_3\ + | SPI_CFG2_MIDI_2 | SPI_CFG2_MIDI_1 | SPI_CFG2_MIDI_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TXCRCINIT_ALL TXCRC Init All + * @{ + */ +#define LL_SPI_TXCRCINIT_ALL_ZERO_PATTERN (0x00000000UL) +#define LL_SPI_TXCRCINIT_ALL_ONES_PATTERN (SPI_CR1_TCRCINI) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RXCRCINIT_ALL RXCRC Init All + * @{ + */ +#define LL_SPI_RXCRCINIT_ALL_ZERO_PATTERN (0x00000000UL) +#define LL_SPI_RXCRCINIT_ALL_ONES_PATTERN (SPI_CR1_RCRCINI) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_UDR_CONFIG_REGISTER UDR Config Register + * @{ + */ +#define LL_SPI_UDR_CONFIG_REGISTER_PATTERN (0x00000000UL) +#define LL_SPI_UDR_CONFIG_LAST_RECEIVED (SPI_CFG1_UDRCFG) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA (0x00000000UL) +#define LL_SPI_PROTOCOL_TI (SPI_CFG2_SP_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE (0x00000000UL) +#define LL_SPI_PHASE_2EDGE (SPI_CFG2_CPHA) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW (0x00000000UL) +#define LL_SPI_POLARITY_HIGH (SPI_CFG2_CPOL) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_POLARITY NSS Polarity + * @{ + */ +#define LL_SPI_NSS_POLARITY_LOW (0x00000000UL) +#define LL_SPI_NSS_POLARITY_HIGH (SPI_CFG2_SSIOP) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_BYPASS (SPI_CFG1_BPASS) +#define LL_SPI_BAUDRATEPRESCALER_DIV2 (0x00000000UL) +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CFG1_MBR_0) +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CFG1_MBR_1) +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CFG1_MBR_1 | SPI_CFG1_MBR_0) +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CFG1_MBR_2) +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CFG1_MBR_2 | SPI_CFG1_MBR_0) +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CFG1_MBR_2 | SPI_CFG1_MBR_1) +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CFG1_MBR_2 | SPI_CFG1_MBR_1 | SPI_CFG1_MBR_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CFG2_LSBFRST) +#define LL_SPI_MSB_FIRST (0x00000000UL) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX (0x00000000UL) +#define LL_SPI_SIMPLEX_TX (SPI_CFG2_COMM_0) +#define LL_SPI_SIMPLEX_RX (SPI_CFG2_COMM_1) +#define LL_SPI_HALF_DUPLEX_RX (SPI_CFG2_COMM_0|SPI_CFG2_COMM_1) +#define LL_SPI_HALF_DUPLEX_TX (SPI_CFG2_COMM_0|SPI_CFG2_COMM_1|SPI_CR1_HDDIR) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Data Width + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CFG1_DSIZE_0 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_5BIT (SPI_CFG1_DSIZE_2) +#define LL_SPI_DATAWIDTH_6BIT (SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_7BIT (SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_8BIT (SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_9BIT (SPI_CFG1_DSIZE_3) +#define LL_SPI_DATAWIDTH_10BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_11BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_12BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_13BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2) +#define LL_SPI_DATAWIDTH_14BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_15BIT (SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_16BIT (SPI_CFG1_DSIZE_3\ + | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_17BIT (SPI_CFG1_DSIZE_4) +#define LL_SPI_DATAWIDTH_18BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_19BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_20BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_0 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_21BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_2) +#define LL_SPI_DATAWIDTH_22BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_23BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_24BIT (SPI_CFG1_DSIZE_4\ + | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_25BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_3) +#define LL_SPI_DATAWIDTH_26BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_27BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_28BIT (SPI_CFG1_DSIZE_4\ + | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_29BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2) +#define LL_SPI_DATAWIDTH_30BIT (SPI_CFG1_DSIZE_4\ + | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_0) +#define LL_SPI_DATAWIDTH_31BIT (SPI_CFG1_DSIZE_4\ + | SPI_CFG1_DSIZE_3 | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1) +#define LL_SPI_DATAWIDTH_32BIT (SPI_CFG1_DSIZE_4 | SPI_CFG1_DSIZE_3\ + | SPI_CFG1_DSIZE_2 | SPI_CFG1_DSIZE_1 | SPI_CFG1_DSIZE_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_FIFO_TH FIFO Threshold + * @{ + */ +#define LL_SPI_FIFO_TH_01DATA (0x00000000UL) +#define LL_SPI_FIFO_TH_02DATA (SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_03DATA (SPI_CFG1_FTHLV_1) +#define LL_SPI_FIFO_TH_04DATA (SPI_CFG1_FTHLV_0 | SPI_CFG1_FTHLV_1) +#define LL_SPI_FIFO_TH_05DATA (SPI_CFG1_FTHLV_2) +#define LL_SPI_FIFO_TH_06DATA (SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_07DATA (SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_1) +#define LL_SPI_FIFO_TH_08DATA (SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_1 | SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_09DATA (SPI_CFG1_FTHLV_3) +#define LL_SPI_FIFO_TH_10DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_11DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_1) +#define LL_SPI_FIFO_TH_12DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_1 | SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_13DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_2) +#define LL_SPI_FIFO_TH_14DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_0) +#define LL_SPI_FIFO_TH_15DATA (SPI_CFG1_FTHLV_3 | SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_1) +#define LL_SPI_FIFO_TH_16DATA (SPI_CFG1_FTHLV_3\ + | SPI_CFG1_FTHLV_2 | SPI_CFG1_FTHLV_1 | SPI_CFG1_FTHLV_0) +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE (0x00000000UL) /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CFG1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC CRC + * @{ + */ +#define LL_SPI_CRC_4BIT (SPI_CFG1_CRCSIZE_0 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_5BIT (SPI_CFG1_CRCSIZE_2) +#define LL_SPI_CRC_6BIT (SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_7BIT (SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_8BIT (SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_9BIT (SPI_CFG1_CRCSIZE_3) +#define LL_SPI_CRC_10BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_11BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_12BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_13BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2) +#define LL_SPI_CRC_14BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_15BIT (SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_16BIT (SPI_CFG1_CRCSIZE_3\ + | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_17BIT (SPI_CFG1_CRCSIZE_4) +#define LL_SPI_CRC_18BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_19BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_20BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_0 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_21BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_2) +#define LL_SPI_CRC_22BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_23BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_24BIT (SPI_CFG1_CRCSIZE_4\ + | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_25BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_3) +#define LL_SPI_CRC_26BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_27BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_28BIT (SPI_CFG1_CRCSIZE_4\ + | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_29BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2) +#define LL_SPI_CRC_30BIT (SPI_CFG1_CRCSIZE_4\ + | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_0) +#define LL_SPI_CRC_31BIT (SPI_CFG1_CRCSIZE_4\ + | SPI_CFG1_CRCSIZE_3 | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1) +#define LL_SPI_CRC_32BIT (SPI_CFG1_CRCSIZE_4 | SPI_CFG1_CRCSIZE_3\ + | SPI_CFG1_CRCSIZE_2 | SPI_CFG1_CRCSIZE_1 | SPI_CFG1_CRCSIZE_0) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE NSS Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CFG2_SSM) +#define LL_SPI_NSS_HARD_INPUT (0x00000000UL) +#define LL_SPI_NSS_HARD_OUTPUT (SPI_CFG2_SSOE) +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RxFIFO Packing LeVel + * @{ + */ +#define LL_SPI_RX_FIFO_0PACKET (0x00000000UL) /* 0 or multiple of 4 packet available is the RxFIFO */ +#define LL_SPI_RX_FIFO_1PACKET (SPI_SR_RXPLVL_0) +#define LL_SPI_RX_FIFO_2PACKET (SPI_SR_RXPLVL_1) +#define LL_SPI_RX_FIFO_3PACKET (SPI_SR_RXPLVL_1 | SPI_SR_RXPLVL_0) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Swap the MOSI and MISO pin + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 IOSWP LL_SPI_EnableIOSwap + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIOSwap(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG2, SPI_CFG2_IOSWP); +} + +/** + * @brief Restore default function for MOSI and MISO pin + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 IOSWP LL_SPI_DisableIOSwap + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIOSwap(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG2, SPI_CFG2_IOSWP); +} + +/** + * @brief Check if MOSI and MISO pin are swapped + * @rmtoll CFG2 IOSWP LL_SPI_IsEnabledIOSwap + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIOSwap(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG2, SPI_CFG2_IOSWP) == (SPI_CFG2_IOSWP)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO control + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 AFCNTR LL_SPI_EnableGPIOControl + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableGPIOControl(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG2, SPI_CFG2_AFCNTR); +} + +/** + * @brief Disable GPIO control + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 AFCNTR LL_SPI_DisableGPIOControl + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableGPIOControl(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG2, SPI_CFG2_AFCNTR); +} + +/** + * @brief Check if GPIO control is active + * @rmtoll CFG2 AFCNTR LL_SPI_IsEnabledGPIOControl + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledGPIOControl(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG2, SPI_CFG2_AFCNTR) == (SPI_CFG2_AFCNTR)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI Mode to Master or Slave + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 MASTER LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_MASTER, Mode); +} + +/** + * @brief Get SPI Mode (Master or Slave) + * @rmtoll CFG2 MASTER LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_MASTER)); +} + +/** + * @brief Configure the Idleness applied by master between active edge of SS and first send data + * @rmtoll CFG2 MSSI LL_SPI_SetMasterSSIdleness + * @param SPIx SPI Instance + * @param MasterSSIdleness This parameter can be one of the following values: + * @arg @ref LL_SPI_SS_IDLENESS_00CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_01CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_02CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_03CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_04CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_05CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_06CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_07CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_08CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_09CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_10CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_11CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_12CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_13CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_14CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_15CYCLE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMasterSSIdleness(SPI_TypeDef *SPIx, uint32_t MasterSSIdleness) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_MSSI, MasterSSIdleness); +} + +/** + * @brief Get the configured Idleness applied by master + * @rmtoll CFG2 MSSI LL_SPI_GetMasterSSIdleness + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_SS_IDLENESS_00CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_01CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_02CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_03CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_04CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_05CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_06CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_07CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_08CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_09CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_10CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_11CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_12CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_13CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_14CYCLE + * @arg @ref LL_SPI_SS_IDLENESS_15CYCLE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMasterSSIdleness(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_MSSI)); +} + +/** + * @brief Configure the idleness applied by master between data frame + * @rmtoll CFG2 MIDI LL_SPI_SetInterDataIdleness + * @param SPIx SPI Instance + * @param MasterInterDataIdleness This parameter can be one of the following values: + * @arg @ref LL_SPI_ID_IDLENESS_00CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_01CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_02CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_03CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_04CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_05CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_06CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_07CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_08CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_09CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_10CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_11CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_12CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_13CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_14CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_15CYCLE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetInterDataIdleness(SPI_TypeDef *SPIx, uint32_t MasterInterDataIdleness) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_MIDI, MasterInterDataIdleness); +} + +/** + * @brief Get the configured inter data idleness + * @rmtoll CFG2 MIDI LL_SPI_SetInterDataIdleness + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_ID_IDLENESS_00CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_01CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_02CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_03CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_04CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_05CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_06CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_07CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_08CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_09CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_10CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_11CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_12CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_13CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_14CYCLE + * @arg @ref LL_SPI_ID_IDLENESS_15CYCLE + */ +__STATIC_INLINE uint32_t LL_SPI_GetInterDataIdleness(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_MIDI)); +} + +/** + * @brief Set transfer size + * @note Count is the number of frame to be transferred + * @rmtoll CR2 TSIZE LL_SPI_SetTransferSize + * @param SPIx SPI Instance + * @param Count 0..0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferSize(SPI_TypeDef *SPIx, uint32_t Count) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_TSIZE, Count); +} + +/** + * @brief Get transfer size + * @note Count is the number of frame to be transferred + * @rmtoll CR2 TSIZE LL_SPI_GetTransferSize + * @param SPIx SPI Instance + * @retval 0..0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferSize(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_TSIZE)); +} + +/** + * @brief Lock the AF configuration of associated IOs + * @note Once this bit is set, the AF configuration remains locked until a hardware reset occurs. + * the reset of the IOLock bit is done by hardware. for that, LL_SPI_DisableIOLock can not exist. + * @rmtoll CR1 IOLOCK LL_SPI_EnableIOLock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIOLock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_IOLOCK); +} + +/** + * @brief Check if the AF configuration is locked. + * @rmtoll CR1 IOLOCK LL_SPI_IsEnabledIOLock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIOLock(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_IOLOCK) == (SPI_CR1_IOLOCK)) ? 1UL : 0UL); +} + +/** + * @brief Set Tx CRC Initialization Pattern + * @rmtoll CR1 TCRCINI LL_SPI_SetTxCRCInitPattern + * @param SPIx SPI Instance + * @param TXCRCInitAll This parameter can be one of the following values: + * @arg @ref LL_SPI_TXCRCINIT_ALL_ZERO_PATTERN + * @arg @ref LL_SPI_TXCRCINIT_ALL_ONES_PATTERN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTxCRCInitPattern(SPI_TypeDef *SPIx, uint32_t TXCRCInitAll) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RCRCINI, TXCRCInitAll); +} + +/** + * @brief Get Tx CRC Initialization Pattern + * @rmtoll CR1 TCRCINI LL_SPI_GetTxCRCInitPattern + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TXCRCINIT_ALL_ZERO_PATTERN + * @arg @ref LL_SPI_TXCRCINIT_ALL_ONES_PATTERN + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRCInitPattern(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_TCRCINI)); +} + +/** + * @brief Set Rx CRC Initialization Pattern + * @rmtoll CR1 RCRCINI LL_SPI_SetRxCRCInitPattern + * @param SPIx SPI Instance + * @param RXCRCInitAll This parameter can be one of the following values: + * @arg @ref LL_SPI_RXCRCINIT_ALL_ZERO_PATTERN + * @arg @ref LL_SPI_RXCRCINIT_ALL_ONES_PATTERN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxCRCInitPattern(SPI_TypeDef *SPIx, uint32_t RXCRCInitAll) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RCRCINI, RXCRCInitAll); +} + +/** + * @brief Get Rx CRC Initialization Pattern + * @rmtoll CR1 RCRCINI LL_SPI_GetRxCRCInitPattern + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RXCRCINIT_ALL_ZERO_PATTERN + * @arg @ref LL_SPI_RXCRCINIT_ALL_ONES_PATTERN + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRCInitPattern(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RCRCINI)); +} + +/** + * @brief Set internal SS input level ignoring what comes from PIN. + * @note This configuration has effect only with config LL_SPI_NSS_SOFT + * @rmtoll CR1 SSI LL_SPI_SetInternalSSLevel + * @param SPIx SPI Instance + * @param SSLevel This parameter can be one of the following values: + * @arg @ref LL_SPI_SS_LEVEL_HIGH + * @arg @ref LL_SPI_SS_LEVEL_LOW + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetInternalSSLevel(SPI_TypeDef *SPIx, uint32_t SSLevel) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSI, SSLevel); +} + +/** + * @brief Get internal SS input level + * @rmtoll CR1 SSI LL_SPI_GetInternalSSLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_SS_LEVEL_HIGH + * @arg @ref LL_SPI_SS_LEVEL_LOW + */ +__STATIC_INLINE uint32_t LL_SPI_GetInternalSSLevel(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_SSI)); +} + +/** + * @brief Enable CRC computation on 33/17 bits + * @rmtoll CR1 CRC33_17 LL_SPI_EnableFullSizeCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableFullSizeCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRC33_17); +} + +/** + * @brief Disable CRC computation on 33/17 bits + * @rmtoll CR1 CRC33_17 LL_SPI_DisableFullSizeCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableFullSizeCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRC33_17); +} + +/** + * @brief Check if Enable CRC computation on 33/17 bits is enabled + * @rmtoll CR1 CRC33_17 LL_SPI_IsEnabledFullSizeCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledFullSizeCRC(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRC33_17) == (SPI_CR1_CRC33_17)) ? 1UL : 0UL); +} + +/** + * @brief Suspend an ongoing transfer for Master configuration + * @rmtoll CR1 CSUSP LL_SPI_SuspendMasterTransfer + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SuspendMasterTransfer(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CSUSP); +} + +/** + * @brief Start effective transfer on wire for Master configuration + * @rmtoll CR1 CSTART LL_SPI_StartMasterTransfer + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_StartMasterTransfer(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CSTART); +} + +/** + * @brief Check if there is an unfinished master transfer + * @rmtoll CR1 CSTART LL_SPI_IsActiveMasterTransfer + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveMasterTransfer(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CSTART) == (SPI_CR1_CSTART)) ? 1UL : 0UL); +} + +/** + * @brief Enable Master Rx auto suspend in case of overrun + * @rmtoll CR1 MASRX LL_SPI_EnableMasterRxAutoSuspend + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableMasterRxAutoSuspend(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_MASRX); +} + +/** + * @brief Disable Master Rx auto suspend in case of overrun + * @rmtoll CR1 MASRX LL_SPI_DisableMasterRxAutoSuspend + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableMasterRxAutoSuspend(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_MASRX); +} + +/** + * @brief Check if Master Rx auto suspend is activated + * @rmtoll CR1 MASRX LL_SPI_IsEnabledMasterRxAutoSuspend + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledMasterRxAutoSuspend(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_MASRX) == (SPI_CR1_MASRX)) ? 1UL : 0UL); +} + +/** + * @brief Set Underrun behavior + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG1 UDRCFG LL_SPI_SetUDRConfiguration + * @param SPIx SPI Instance + * @param UDRConfig This parameter can be one of the following values: + * @arg @ref LL_SPI_UDR_CONFIG_REGISTER_PATTERN + * @arg @ref LL_SPI_UDR_CONFIG_LAST_RECEIVED + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetUDRConfiguration(SPI_TypeDef *SPIx, uint32_t UDRConfig) +{ + MODIFY_REG(SPIx->CFG1, SPI_CFG1_UDRCFG, UDRConfig); +} + +/** + * @brief Get Underrun behavior + * @rmtoll CFG1 UDRCFG LL_SPI_GetUDRConfiguration + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_UDR_CONFIG_REGISTER_PATTERN + * @arg @ref LL_SPI_UDR_CONFIG_LAST_RECEIVED + */ +__STATIC_INLINE uint32_t LL_SPI_GetUDRConfiguration(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG1, SPI_CFG1_UDRCFG)); +} + + +/** + * @brief Set Serial protocol used + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG2 SP LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_SP, Standard); +} + +/** + * @brief Get Serial protocol used + * @rmtoll CFG2 SP LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_SP)); +} + +/** + * @brief Set Clock phase + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_CPHA, ClockPhase); +} + +/** + * @brief Get Clock phase + * @rmtoll CFG2 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_CPHA)); +} + +/** + * @brief Set Clock polarity + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_CPOL, ClockPolarity); +} + +/** + * @brief Get Clock polarity + * @rmtoll CFG2 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_CPOL)); +} + +/** + * @brief Set NSS polarity + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 SSIOP LL_SPI_SetNSSPolarity + * @param SPIx SPI Instance + * @param NSSPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_POLARITY_LOW + * @arg @ref LL_SPI_NSS_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSPolarity(SPI_TypeDef *SPIx, uint32_t NSSPolarity) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_SSIOP, NSSPolarity); +} + +/** + * @brief Get NSS polarity + * @rmtoll CFG2 SSIOP LL_SPI_GetNSSPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_POLARITY_LOW + * @arg @ref LL_SPI_NSS_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSPolarity(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_SSIOP)); +} + +/** + * @brief Set Baudrate Prescaler + * @note This configuration can not be changed when SPI is enabled. + * SPI BaudRate = fPCLK/Pescaler. + * @rmtoll CFG1 MBR LL_SPI_SetBaudRatePrescaler\n + * CFG1 BPASS LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param Baudrate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_BYPASS + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t Baudrate) +{ + MODIFY_REG(SPIx->CFG1, (SPI_CFG1_MBR | SPI_CFG1_BPASS), Baudrate); +} + +/** + * @brief Get Baudrate Prescaler + * @rmtoll CFG1 MBR LL_SPI_GetBaudRatePrescaler\n + * CFG1 BPASS LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_BYPASS + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG1, (SPI_CFG1_MBR | SPI_CFG1_BPASS))); +} + +/** + * @brief Set Transfer Bit Order + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 LSBFRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_LSBFRST, BitOrder); +} + +/** + * @brief Get Transfer Bit Order + * @rmtoll CFG2 LSBFRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_LSBFRST)); +} + +/** + * @brief Set Transfer Mode + * @note This configuration can not be changed when SPI is enabled except for half duplex direction + * using LL_SPI_SetHalfDuplexDirection. + * @rmtoll CR1 HDDIR LL_SPI_SetTransferDirection\n + * CFG2 COMM LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_TX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_HDDIR, TransferDirection & SPI_CR1_HDDIR); + MODIFY_REG(SPIx->CFG2, SPI_CFG2_COMM, TransferDirection & SPI_CFG2_COMM); +} + +/** + * @brief Get Transfer Mode + * @rmtoll CR1 HDDIR LL_SPI_GetTransferDirection\n + * CFG2 COMM LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_TX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(const SPI_TypeDef *SPIx) +{ + uint32_t Hddir = READ_BIT(SPIx->CR1, SPI_CR1_HDDIR); + uint32_t Comm = READ_BIT(SPIx->CFG2, SPI_CFG2_COMM); + return (Hddir | Comm); +} + +/** + * @brief Set direction for Half-Duplex Mode + * @note In master mode the MOSI pin is used and in slave mode the MISO pin is used for Half-Duplex. + * @rmtoll CR1 HDDIR LL_SPI_SetHalfDuplexDirection + * @param SPIx SPI Instance + * @param HalfDuplexDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetHalfDuplexDirection(SPI_TypeDef *SPIx, uint32_t HalfDuplexDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_HDDIR, HalfDuplexDirection & SPI_CR1_HDDIR); +} + +/** + * @brief Get direction for Half-Duplex Mode + * @note In master mode the MOSI pin is used and in slave mode the MISO pin is used for Half-Duplex. + * @rmtoll CR1 HDDIR LL_SPI_GetHalfDuplexDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetHalfDuplexDirection(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_HDDIR) | SPI_CFG2_COMM); +} + +/** + * @brief Set Frame Data Size + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG1 DSIZE LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @arg @ref LL_SPI_DATAWIDTH_17BIT + * @arg @ref LL_SPI_DATAWIDTH_18BIT + * @arg @ref LL_SPI_DATAWIDTH_19BIT + * @arg @ref LL_SPI_DATAWIDTH_20BIT + * @arg @ref LL_SPI_DATAWIDTH_21BIT + * @arg @ref LL_SPI_DATAWIDTH_22BIT + * @arg @ref LL_SPI_DATAWIDTH_23BIT + * @arg @ref LL_SPI_DATAWIDTH_24BIT + * @arg @ref LL_SPI_DATAWIDTH_25BIT + * @arg @ref LL_SPI_DATAWIDTH_26BIT + * @arg @ref LL_SPI_DATAWIDTH_27BIT + * @arg @ref LL_SPI_DATAWIDTH_28BIT + * @arg @ref LL_SPI_DATAWIDTH_29BIT + * @arg @ref LL_SPI_DATAWIDTH_30BIT + * @arg @ref LL_SPI_DATAWIDTH_31BIT + * @arg @ref LL_SPI_DATAWIDTH_32BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CFG1, SPI_CFG1_DSIZE, DataWidth); +} + +/** + * @brief Get Frame Data Size + * @rmtoll CFG1 DSIZE LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @arg @ref LL_SPI_DATAWIDTH_17BIT + * @arg @ref LL_SPI_DATAWIDTH_18BIT + * @arg @ref LL_SPI_DATAWIDTH_19BIT + * @arg @ref LL_SPI_DATAWIDTH_20BIT + * @arg @ref LL_SPI_DATAWIDTH_21BIT + * @arg @ref LL_SPI_DATAWIDTH_22BIT + * @arg @ref LL_SPI_DATAWIDTH_23BIT + * @arg @ref LL_SPI_DATAWIDTH_24BIT + * @arg @ref LL_SPI_DATAWIDTH_25BIT + * @arg @ref LL_SPI_DATAWIDTH_26BIT + * @arg @ref LL_SPI_DATAWIDTH_27BIT + * @arg @ref LL_SPI_DATAWIDTH_28BIT + * @arg @ref LL_SPI_DATAWIDTH_29BIT + * @arg @ref LL_SPI_DATAWIDTH_30BIT + * @arg @ref LL_SPI_DATAWIDTH_31BIT + * @arg @ref LL_SPI_DATAWIDTH_32BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG1, SPI_CFG1_DSIZE)); +} + +/** + * @brief Set threshold of FIFO that triggers a transfer event + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG1 FTHLV LL_SPI_SetFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_FIFO_TH_01DATA + * @arg @ref LL_SPI_FIFO_TH_02DATA + * @arg @ref LL_SPI_FIFO_TH_03DATA + * @arg @ref LL_SPI_FIFO_TH_04DATA + * @arg @ref LL_SPI_FIFO_TH_05DATA + * @arg @ref LL_SPI_FIFO_TH_06DATA + * @arg @ref LL_SPI_FIFO_TH_07DATA + * @arg @ref LL_SPI_FIFO_TH_08DATA + * @arg @ref LL_SPI_FIFO_TH_09DATA + * @arg @ref LL_SPI_FIFO_TH_10DATA + * @arg @ref LL_SPI_FIFO_TH_11DATA + * @arg @ref LL_SPI_FIFO_TH_12DATA + * @arg @ref LL_SPI_FIFO_TH_13DATA + * @arg @ref LL_SPI_FIFO_TH_14DATA + * @arg @ref LL_SPI_FIFO_TH_15DATA + * @arg @ref LL_SPI_FIFO_TH_16DATA + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CFG1, SPI_CFG1_FTHLV, Threshold); +} + +/** + * @brief Get threshold of FIFO that triggers a transfer event + * @rmtoll CFG1 FTHLV LL_SPI_GetFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FIFO_TH_01DATA + * @arg @ref LL_SPI_FIFO_TH_02DATA + * @arg @ref LL_SPI_FIFO_TH_03DATA + * @arg @ref LL_SPI_FIFO_TH_04DATA + * @arg @ref LL_SPI_FIFO_TH_05DATA + * @arg @ref LL_SPI_FIFO_TH_06DATA + * @arg @ref LL_SPI_FIFO_TH_07DATA + * @arg @ref LL_SPI_FIFO_TH_08DATA + * @arg @ref LL_SPI_FIFO_TH_09DATA + * @arg @ref LL_SPI_FIFO_TH_10DATA + * @arg @ref LL_SPI_FIFO_TH_11DATA + * @arg @ref LL_SPI_FIFO_TH_12DATA + * @arg @ref LL_SPI_FIFO_TH_13DATA + * @arg @ref LL_SPI_FIFO_TH_14DATA + * @arg @ref LL_SPI_FIFO_TH_15DATA + * @arg @ref LL_SPI_FIFO_TH_16DATA + */ +__STATIC_INLINE uint32_t LL_SPI_GetFIFOThreshold(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG1, SPI_CFG1_FTHLV)); +} + +/** + * @brief Enable CRC + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG1, SPI_CFG1_CRCEN); +} + +/** + * @brief Disable CRC + * @rmtoll CFG1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG1, SPI_CFG1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @rmtoll CFG1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG1, SPI_CFG1_CRCEN) == SPI_CFG1_CRCEN) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This configuration can not be changed when SPI is enabled. + * @rmtoll CFG1 CRCSIZE LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_4BIT + * @arg @ref LL_SPI_CRC_5BIT + * @arg @ref LL_SPI_CRC_6BIT + * @arg @ref LL_SPI_CRC_7BIT + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_9BIT + * @arg @ref LL_SPI_CRC_10BIT + * @arg @ref LL_SPI_CRC_11BIT + * @arg @ref LL_SPI_CRC_12BIT + * @arg @ref LL_SPI_CRC_13BIT + * @arg @ref LL_SPI_CRC_14BIT + * @arg @ref LL_SPI_CRC_15BIT + * @arg @ref LL_SPI_CRC_16BIT + * @arg @ref LL_SPI_CRC_17BIT + * @arg @ref LL_SPI_CRC_18BIT + * @arg @ref LL_SPI_CRC_19BIT + * @arg @ref LL_SPI_CRC_20BIT + * @arg @ref LL_SPI_CRC_21BIT + * @arg @ref LL_SPI_CRC_22BIT + * @arg @ref LL_SPI_CRC_23BIT + * @arg @ref LL_SPI_CRC_24BIT + * @arg @ref LL_SPI_CRC_25BIT + * @arg @ref LL_SPI_CRC_26BIT + * @arg @ref LL_SPI_CRC_27BIT + * @arg @ref LL_SPI_CRC_28BIT + * @arg @ref LL_SPI_CRC_29BIT + * @arg @ref LL_SPI_CRC_30BIT + * @arg @ref LL_SPI_CRC_31BIT + * @arg @ref LL_SPI_CRC_32BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CFG1, SPI_CFG1_CRCSIZE, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CFG1 CRCSIZE LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_4BIT + * @arg @ref LL_SPI_CRC_5BIT + * @arg @ref LL_SPI_CRC_6BIT + * @arg @ref LL_SPI_CRC_7BIT + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_9BIT + * @arg @ref LL_SPI_CRC_10BIT + * @arg @ref LL_SPI_CRC_11BIT + * @arg @ref LL_SPI_CRC_12BIT + * @arg @ref LL_SPI_CRC_13BIT + * @arg @ref LL_SPI_CRC_14BIT + * @arg @ref LL_SPI_CRC_15BIT + * @arg @ref LL_SPI_CRC_16BIT + * @arg @ref LL_SPI_CRC_17BIT + * @arg @ref LL_SPI_CRC_18BIT + * @arg @ref LL_SPI_CRC_19BIT + * @arg @ref LL_SPI_CRC_20BIT + * @arg @ref LL_SPI_CRC_21BIT + * @arg @ref LL_SPI_CRC_22BIT + * @arg @ref LL_SPI_CRC_23BIT + * @arg @ref LL_SPI_CRC_24BIT + * @arg @ref LL_SPI_CRC_25BIT + * @arg @ref LL_SPI_CRC_26BIT + * @arg @ref LL_SPI_CRC_27BIT + * @arg @ref LL_SPI_CRC_28BIT + * @arg @ref LL_SPI_CRC_29BIT + * @arg @ref LL_SPI_CRC_30BIT + * @arg @ref LL_SPI_CRC_31BIT + * @arg @ref LL_SPI_CRC_32BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG1, SPI_CFG1_CRCSIZE)); +} + +/** + * @brief Set NSS Mode + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 SSM LL_SPI_SetNSSMode\n + * CFG2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_SSM | SPI_CFG2_SSOE, NSS); +} + +/** + * @brief Set NSS Mode + * @rmtoll CFG2 SSM LL_SPI_GetNSSMode\n + * CFG2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CFG2, SPI_CFG2_SSM | SPI_CFG2_SSOE)); +} + +/** + * @brief Enable NSS pulse mgt + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 SSOM LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG2, SPI_CFG2_SSOM); +} + +/** + * @brief Disable NSS pulse mgt + * @note This configuration can not be changed when SPI is enabled. + * This bit is not used in SPI TI mode. + * @rmtoll CFG2 SSOM LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG2, SPI_CFG2_SSOM); +} + +/** + * @brief Check if NSS pulse is enabled + * @rmtoll CFG2 SSOM LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG2, SPI_CFG2_SSOM) == SPI_CFG2_SSOM) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if there is enough data in FIFO to read a full packet + * @rmtoll SR RXP LL_SPI_IsActiveFlag_RXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXP) == (SPI_SR_RXP)) ? 1UL : 0UL); +} + +/** + * @brief Check if there is enough space in FIFO to hold a full packet + * @rmtoll SR TXP LL_SPI_IsActiveFlag_TXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXP) == (SPI_SR_TXP)) ? 1UL : 0UL); +} + +/** + * @brief Check if there enough space in FIFO to hold a full packet, AND enough data to read a full packet + * @rmtoll SR DXP LL_SPI_IsActiveFlag_DXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_DXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_DXP) == (SPI_SR_DXP)) ? 1UL : 0UL); +} + +/** + * @brief Check that end of transfer event occurred + * @rmtoll SR EOT LL_SPI_IsActiveFlag_EOT + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_EOT(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_EOT) == (SPI_SR_EOT)) ? 1UL : 0UL); +} + +/** + * @brief Check that all required data has been filled in the fifo according to transfer size + * @rmtoll SR TXTF LL_SPI_IsActiveFlag_TXTF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXTF(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXTF) == (SPI_SR_TXTF)) ? 1UL : 0UL); +} + +/** + * @brief Get Underrun error flag + * @rmtoll SR UDR LL_SPI_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_UDR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCE LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCE) == (SPI_SR_CRCE)) ? 1UL : 0UL); +} + +/** + * @brief Get Mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get Overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get TI Frame format error flag + * @rmtoll SR TIFRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TIFRE) == (SPI_SR_TIFRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if a suspend operation is done + * @rmtoll SR SUSP LL_SPI_IsActiveFlag_SUSP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_SUSP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_SUSP) == (SPI_SR_SUSP)) ? 1UL : 0UL); +} + +/** + * @brief Check if last TxFIFO or CRC frame transmission is completed + * @rmtoll SR TXC LL_SPI_IsActiveFlag_TXC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXC(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXC) == (SPI_SR_TXC)) ? 1UL : 0UL); +} + +/** + * @brief Check if at least one 32-bit data is available in RxFIFO + * @rmtoll SR RXWNE LL_SPI_IsActiveFlag_RXWNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXWNE(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXWNE) == (SPI_SR_RXWNE)) ? 1UL : 0UL); +} + +/** + * @brief Get number of data framed remaining in current TSIZE + * @rmtoll SR CTSIZE LL_SPI_GetRemainingDataFrames + * @param SPIx SPI Instance + * @retval 0..0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRemainingDataFrames(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_CTSIZE) >> SPI_SR_CTSIZE_Pos); +} + +/** + * @brief Get RxFIFO packing Level + * @rmtoll SR RXPLVL LL_SPI_GetRxFIFOPackingLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_0PACKET + * @arg @ref LL_SPI_RX_FIFO_1PACKET + * @arg @ref LL_SPI_RX_FIFO_2PACKET + * @arg @ref LL_SPI_RX_FIFO_3PACKET + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOPackingLevel(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_RXPLVL)); +} + +/** + * @brief Clear End Of Transfer flag + * @rmtoll IFCR EOTC LL_SPI_ClearFlag_EOT + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_EOT(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_EOTC); +} + +/** + * @brief Clear TXTF flag + * @rmtoll IFCR TXTFC LL_SPI_ClearFlag_TXTF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_TXTF(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_TXTFC); +} + +/** + * @brief Clear Underrun error flag + * @rmtoll IFCR UDRC LL_SPI_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_UDRC); +} + +/** + * @brief Clear Overrun error flag + * @rmtoll IFCR OVRC LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_OVRC); +} + +/** + * @brief Clear CRC error flag + * @rmtoll IFCR CRCEC LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_CRCEC); +} + +/** + * @brief Clear Mode fault error flag + * @rmtoll IFCR MODFC LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_MODFC); +} + +/** + * @brief Clear Frame format error flag + * @rmtoll IFCR TIFREC LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_TIFREC); +} + +/** + * @brief Clear SUSP flag + * @rmtoll IFCR SUSPC LL_SPI_ClearFlag_SUSP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_SUSP(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IFCR, SPI_IFCR_SUSPC); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Rx Packet available IT + * @rmtoll IER RXPIE LL_SPI_EnableIT_RXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXP(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_RXPIE); +} + +/** + * @brief Enable Tx Packet space available IT + * @rmtoll IER TXPIE LL_SPI_EnableIT_TXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXP(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_TXPIE); +} + +/** + * @brief Enable Duplex Packet available IT + * @rmtoll IER DXPIE LL_SPI_EnableIT_DXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_DXP(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_DXPIE); +} + +/** + * @brief Enable End Of Transfer IT + * @rmtoll IER EOTIE LL_SPI_EnableIT_EOT + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_EOT(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_EOTIE); +} + +/** + * @brief Enable TXTF IT + * @rmtoll IER TXTFIE LL_SPI_EnableIT_TXTF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXTF(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_TXTFIE); +} + +/** + * @brief Enable Underrun IT + * @rmtoll IER UDRIE LL_SPI_EnableIT_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_UDR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_UDRIE); +} + +/** + * @brief Enable Overrun IT + * @rmtoll IER OVRIE LL_SPI_EnableIT_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_OVR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_OVRIE); +} + +/** + * @brief Enable CRC Error IT + * @rmtoll IER CRCEIE LL_SPI_EnableIT_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_CRCERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_CRCEIE); +} + +/** + * @brief Enable TI Frame Format Error IT + * @rmtoll IER TIFREIE LL_SPI_EnableIT_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_FRE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_TIFREIE); +} + +/** + * @brief Enable MODF IT + * @rmtoll IER MODFIE LL_SPI_EnableIT_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_MODF(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->IER, SPI_IER_MODFIE); +} + +/** + * @brief Disable Rx Packet available IT + * @rmtoll IER RXPIE LL_SPI_DisableIT_RXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXP(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_RXPIE); +} + +/** + * @brief Disable Tx Packet space available IT + * @rmtoll IER TXPIE LL_SPI_DisableIT_TXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXP(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_TXPIE); +} + +/** + * @brief Disable Duplex Packet available IT + * @rmtoll IER DXPIE LL_SPI_DisableIT_DXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_DXP(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_DXPIE); +} + +/** + * @brief Disable End Of Transfer IT + * @rmtoll IER EOTIE LL_SPI_DisableIT_EOT + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_EOT(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_EOTIE); +} + +/** + * @brief Disable TXTF IT + * @rmtoll IER TXTFIE LL_SPI_DisableIT_TXTF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXTF(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_TXTFIE); +} + +/** + * @brief Disable Underrun IT + * @rmtoll IER UDRIE LL_SPI_DisableIT_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_UDR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_UDRIE); +} + +/** + * @brief Disable Overrun IT + * @rmtoll IER OVRIE LL_SPI_DisableIT_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_OVR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_OVRIE); +} + +/** + * @brief Disable CRC Error IT + * @rmtoll IER CRCEIE LL_SPI_DisableIT_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_CRCEIE); +} + +/** + * @brief Disable TI Frame Format Error IT + * @rmtoll IER TIFREIE LL_SPI_DisableIT_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_FRE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_TIFREIE); +} + +/** + * @brief Disable MODF IT + * @rmtoll IER MODFIE LL_SPI_DisableIT_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_MODF(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->IER, SPI_IER_MODFIE); +} + +/** + * @brief Check if Rx Packet available IT is enabled + * @rmtoll IER RXPIE LL_SPI_IsEnabledIT_RXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_RXPIE) == (SPI_IER_RXPIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx Packet space available IT is enabled + * @rmtoll IER TXPIE LL_SPI_IsEnabledIT_TXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_TXPIE) == (SPI_IER_TXPIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Duplex Packet available IT is enabled + * @rmtoll IER DXPIE LL_SPI_IsEnabledIT_DXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_DXP(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_DXPIE) == (SPI_IER_DXPIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if End Of Transfer IT is enabled + * @rmtoll IER EOTIE LL_SPI_IsEnabledIT_EOT + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_EOT(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_EOTIE) == (SPI_IER_EOTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if TXTF IT is enabled + * @rmtoll IER TXTFIE LL_SPI_IsEnabledIT_TXTF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXTF(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_TXTFIE) == (SPI_IER_TXTFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Underrun IT is enabled + * @rmtoll IER UDRIE LL_SPI_IsEnabledIT_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_UDR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_UDRIE) == (SPI_IER_UDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Overrun IT is enabled + * @rmtoll IER OVRIE LL_SPI_IsEnabledIT_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_OVR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_OVRIE) == (SPI_IER_OVRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if CRC Error IT is enabled + * @rmtoll IER CRCEIE LL_SPI_IsEnabledIT_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_CRCERR(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_CRCEIE) == (SPI_IER_CRCEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if TI Frame Format Error IT is enabled + * @rmtoll IER TIFREIE LL_SPI_IsEnabledIT_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_FRE(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_TIFREIE) == (SPI_IER_TIFREIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if MODF IT is enabled + * @rmtoll IER MODFIE LL_SPI_IsEnabledIT_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_MODF(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->IER, SPI_IER_MODFIE) == (SPI_IER_MODFIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CFG1 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG1, SPI_CFG1_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CFG1 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG1, SPI_CFG1_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CFG1 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG1, SPI_CFG1_RXDMAEN) == (SPI_CFG1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CFG1 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CFG1, SPI_CFG1_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CFG1 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CFG1, SPI_CFG1_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CFG1 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CFG1, SPI_CFG1_TXDMAEN) == (SPI_CFG1_TXDMAEN)) ? 1UL : 0UL); +} +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDR LL_SPI_DMA_GetTxRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetTxRegAddr(const SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->TXDR); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RXDR RXDR LL_SPI_DMA_GetRxRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRxRegAddr(const SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->RXDR); +} +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA_Management + * @{ + */ + +/** + * @brief Read Data Register + * @rmtoll RXDR . LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval 0..0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) /* Derogation MISRAC2012-Rule-8.13 */ +{ + return (*((__IO uint8_t *)&SPIx->RXDR)); +} + +/** + * @brief Read Data Register + * @rmtoll RXDR . LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval 0..0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) /* Derogation MISRAC2012-Rule-8.13 */ +{ +#if defined (__GNUC__) + __IO uint16_t *spirxdr = (__IO uint16_t *)(&(SPIx->RXDR)); + return (*spirxdr); +#else + return (*((__IO uint16_t *)&SPIx->RXDR)); +#endif /* __GNUC__ */ +} + +/** + * @brief Read Data Register + * @rmtoll RXDR . LL_SPI_ReceiveData32 + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_ReceiveData32(SPI_TypeDef *SPIx) /* Derogation MISRAC2012-Rule-8.13 */ +{ + return (*((__IO uint32_t *)&SPIx->RXDR)); +} + +/** + * @brief Write Data Register + * @rmtoll TXDR . LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData 0..0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ + *((__IO uint8_t *)&SPIx->TXDR) = TxData; +} + +/** + * @brief Write Data Register + * @rmtoll TXDR . LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData 0..0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spitxdr = ((__IO uint16_t *)&SPIx->TXDR); + *spitxdr = TxData; +#else + *((__IO uint16_t *)&SPIx->TXDR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write Data Register + * @rmtoll TXDR . LL_SPI_TransmitData32 + * @param SPIx SPI Instance + * @param TxData 0..0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData32(SPI_TypeDef *SPIx, uint32_t TxData) +{ + *((__IO uint32_t *)&SPIx->TXDR) = TxData; +} + +/** + * @brief Set polynomial for CRC calcul + * @rmtoll CRCPOLY CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly 0..0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPOLY, CRCPoly); +} + +/** + * @brief Get polynomial for CRC calcul + * @rmtoll CRCPOLY CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPOLY)); +} + +/** + * @brief Set the underrun pattern + * @rmtoll UDRDR UDRDR LL_SPI_SetUDRPattern + * @param SPIx SPI Instance + * @param Pattern 0..0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetUDRPattern(SPI_TypeDef *SPIx, uint32_t Pattern) +{ + WRITE_REG(SPIx->UDRDR, Pattern); +} + +/** + * @brief Get the underrun pattern + * @rmtoll UDRDR UDRDR LL_SPI_GetUDRPattern + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetUDRPattern(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->UDRDR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRC)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRC)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(const SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ +/** + * @} + */ + +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function + @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function + @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function + @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions + @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas + to calculate Prescaler Linear, Parity and unitary functions + @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() + to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data Format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B (0x00000000UL) +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) +#define LL_I2S_DATAFORMAT_24B_LEFT_ALIGNED (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0 | SPI_I2SCFGR_DATFMT) +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_CHANNEL_LENGTH_TYPE Type of Channel Length + * @{ + */ +#define LL_I2S_SLAVE_VARIABLE_CH_LENGTH (0x00000000UL) +#define LL_I2S_SLAVE_FIXED_CH_LENGTH (SPI_I2SCFGR_FIXCH) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW (0x00000000UL) +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2S Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS (0x00000000UL) +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX (0x00000000UL) +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define LL_I2S_MODE_SLAVE_FULL_DUPLEX (SPI_I2SCFGR_I2SCFG_2) +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_1 | SPI_I2SCFGR_I2SCFG_0) +#define LL_I2S_MODE_MASTER_FULL_DUPLEX (SPI_I2SCFGR_I2SCFG_2 | SPI_I2SCFGR_I2SCFG_0) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_PARITY Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN (0x00000000UL) /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (0x00000001UL) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_FIFO_TH FIFO Threshold Level + * @{ + */ +#define LL_I2S_FIFO_TH_01DATA (LL_SPI_FIFO_TH_01DATA) +#define LL_I2S_FIFO_TH_02DATA (LL_SPI_FIFO_TH_02DATA) +#define LL_I2S_FIFO_TH_03DATA (LL_SPI_FIFO_TH_03DATA) +#define LL_I2S_FIFO_TH_04DATA (LL_SPI_FIFO_TH_04DATA) +#define LL_I2S_FIFO_TH_05DATA (LL_SPI_FIFO_TH_05DATA) +#define LL_I2S_FIFO_TH_06DATA (LL_SPI_FIFO_TH_06DATA) +#define LL_I2S_FIFO_TH_07DATA (LL_SPI_FIFO_TH_07DATA) +#define LL_I2S_FIFO_TH_08DATA (LL_SPI_FIFO_TH_08DATA) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_I2S_LSB_FIRST (LL_SPI_LSB_FIRST) +#define LL_I2S_MSB_FIRST (LL_SPI_MSB_FIRST) +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE (0x00000000UL) +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SCFGR_MCKOE) +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000UL /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000UL /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000UL /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100UL /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000UL /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050UL /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000UL /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025UL /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000UL /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 0UL /*!< Audio Freq not specified. Register I2SDIV = 0 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set I2S Data frame format + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat\n + * I2SCFGR DATFMT LL_I2S_SetDataFormat + * @param SPIx SPI Handle + * @param DataLength This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_24B_LEFT_ALIGNED + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataLength) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATFMT, DataLength); +} + +/** + * @brief Get I2S Data frame format + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat\n + * I2SCFGR DATFMT LL_I2S_GetDataFormat + * @param SPIx SPI Handle + * @retval Return value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_24B_LEFT_ALIGNED + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATFMT)); +} + +/** + * @brief Set I2S Channel Length Type + * @note This feature is useful with SLAVE only + * @rmtoll I2SCFGR FIXCH LL_I2S_SetChannelLengthType + * @param SPIx SPI Handle + * @param ChannelLengthType This parameter can be one of the following values: + * @arg @ref LL_I2S_SLAVE_VARIABLE_CH_LENGTH + * @arg @ref LL_I2S_SLAVE_FIXED_CH_LENGTH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetChannelLengthType(SPI_TypeDef *SPIx, uint32_t ChannelLengthType) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_FIXCH, ChannelLengthType); +} + +/** + * @brief Get I2S Channel Length Type + * @note This feature is useful with SLAVE only + * @rmtoll I2SCFGR FIXCH LL_I2S_GetChannelLengthType + * @param SPIx SPI Handle + * @retval Return value can be one of the following values: + * @arg @ref LL_I2S_SLAVE_VARIABLE_CH_LENGTH + * @arg @ref LL_I2S_SLAVE_FIXED_CH_LENGTH + */ +__STATIC_INLINE uint32_t LL_I2S_GetChannelLengthType(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_FIXCH)); +} + +/** + * @brief Invert the default polarity of WS signal + * @rmtoll I2SCFGR WSINV LL_I2S_EnableWordSelectInversion + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableWordSelectInversion(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_WSINV); +} + +/** + * @brief Use the default polarity of WS signal + * @rmtoll I2SCFGR WSINV LL_I2S_DisableWordSelectInversion + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableWordSelectInversion(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_WSINV); +} + +/** + * @brief Check if polarity of WS signal is inverted + * @rmtoll I2SCFGR WSINV LL_I2S_IsEnabledWordSelectInversion + * @param SPIx SPI Handle + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledWordSelectInversion(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_WSINV) == (SPI_I2SCFGR_WSINV)) ? 1UL : 0UL); +} + +/** + * @brief Set 2S Clock Polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Handle + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL, ClockPolarity); +} + +/** + * @brief Get 2S Clock Polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Handle + * @retval Return value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Handle + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Handle + * @retval Return value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S config + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Handle + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_SLAVE_FULL_DUPLEX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @arg @ref LL_I2S_MODE_MASTER_FULL_DUPLEX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Standard); +} + +/** + * @brief Get I2S config + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Handle + * @retval Return value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_SLAVE_FULL_DUPLEX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @arg @ref LL_I2S_MODE_MASTER_FULL_DUPLEX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * CR1 SPE LL_I2S_Enable + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable I2S peripheral and disable I2S mode + * @rmtoll CR1 SPE LL_I2S_Disable\n + * I2SCFGR I2SMOD LL_I2S_Disable + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); +} + +/** + * @brief Swap the SDO and SDI pin + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG2 IOSWP LL_I2S_EnableIOSwap + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIOSwap(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIOSwap(SPIx); +} + +/** + * @brief Restore default function for SDO and SDI pin + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG2 IOSWP LL_I2S_DisableIOSwap + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIOSwap(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIOSwap(SPIx); +} + +/** + * @brief Check if SDO and SDI pin are swapped + * @rmtoll CFG2 IOSWP LL_I2S_IsEnabledIOSwap + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIOSwap(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIOSwap(SPIx); +} + +/** + * @brief Enable GPIO control + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG2 AFCNTR LL_I2S_EnableGPIOControl + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableGPIOControl(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableGPIOControl(SPIx); +} + +/** + * @brief Disable GPIO control + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG2 AFCNTR LL_I2S_DisableGPIOControl + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableGPIOControl(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableGPIOControl(SPIx); +} + +/** + * @brief Check if GPIO control is active + * @rmtoll CFG2 AFCNTR LL_I2S_IsEnabledGPIOControl + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledGPIOControl(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledGPIOControl(SPIx); +} + +/** + * @brief Lock the AF configuration of associated IOs + * @note Once this bit is set, the SPI_CFG2 register content can not be modified until a hardware reset occurs. + * The reset of the IOLock bit is done by hardware. for that, LL_SPI_DisableIOLock can not exist. + * @rmtoll CR1 IOLOCK LL_SPI_EnableIOLock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIOLock(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIOLock(SPIx); +} + +/** + * @brief Check if the the SPI_CFG2 register is locked + * @rmtoll CR1 IOLOCK LL_I2S_IsEnabledIOLock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIOLock(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIOLock(SPIx); +} + +/** + * @brief Set Transfer Bit Order + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG2 LSBFRST LL_I2S_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_I2S_LSB_FIRST + * @arg @ref LL_I2S_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + LL_SPI_SetTransferBitOrder(SPIx, BitOrder); +} +/** + * @brief Get Transfer Bit Order + * @rmtoll CFG2 LSBFRST LL_I2S_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_LSB_FIRST + * @arg @ref LL_I2S_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferBitOrder(const SPI_TypeDef *SPIx) +{ + return LL_SPI_GetTransferBitOrder(SPIx); +} + +/** + * @brief Start effective transfer on wire + * @rmtoll CR1 CSTART LL_I2S_StartTransfer + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_StartTransfer(SPI_TypeDef *SPIx) +{ + LL_SPI_StartMasterTransfer(SPIx); +} + +/** + * @brief Check if there is an unfinished transfer + * @rmtoll CR1 CSTART LL_I2S_IsActiveTransfer + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveTransfer(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveMasterTransfer(SPIx); +} + +/** + * @brief Set threshold of FIFO that triggers a transfer event + * @note This configuration can not be changed when I2S is enabled. + * @rmtoll CFG1 FTHLV LL_I2S_SetFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_I2S_FIFO_TH_01DATA + * @arg @ref LL_I2S_FIFO_TH_02DATA + * @arg @ref LL_I2S_FIFO_TH_03DATA + * @arg @ref LL_I2S_FIFO_TH_04DATA + * @arg @ref LL_I2S_FIFO_TH_05DATA + * @arg @ref LL_I2S_FIFO_TH_06DATA + * @arg @ref LL_I2S_FIFO_TH_07DATA + * @arg @ref LL_I2S_FIFO_TH_08DATA + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + LL_SPI_SetFIFOThreshold(SPIx, Threshold); +} + +/** + * @brief Get threshold of FIFO that triggers a transfer event + * @rmtoll CFG1 FTHLV LL_I2S_GetFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_FIFO_TH_01DATA + * @arg @ref LL_I2S_FIFO_TH_02DATA + * @arg @ref LL_I2S_FIFO_TH_03DATA + * @arg @ref LL_I2S_FIFO_TH_04DATA + * @arg @ref LL_I2S_FIFO_TH_05DATA + * @arg @ref LL_I2S_FIFO_TH_06DATA + * @arg @ref LL_I2S_FIFO_TH_07DATA + * @arg @ref LL_I2S_FIFO_TH_08DATA + */ +__STATIC_INLINE uint32_t LL_I2S_GetFIFOThreshold(const SPI_TypeDef *SPIx) +{ + return LL_SPI_GetFIFOThreshold(SPIx); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SCFGR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x00 and Max_Data=0xFF + * @note PrescalerLinear '1' is not authorized with parity LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint32_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SDIV, (PrescalerLinear << SPI_I2SCFGR_I2SDIV_Pos)); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SCFGR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SDIV) >> SPI_I2SCFGR_I2SDIV_Pos); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SCFGR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_ODD, PrescalerParity << SPI_I2SCFGR_ODD_Pos); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SCFGR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(const SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ODD) >> SPI_I2SCFGR_ODD_Pos); +} + +/** + * @brief Enable the Master Clock Output (Pin MCK) + * @rmtoll I2SCFGR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_MCKOE); +} + +/** + * @brief Disable the Master Clock Output (Pin MCK) + * @rmtoll I2SCFGR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Handle + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SCFGR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(const SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_MCKOE) == (SPI_I2SCFGR_MCKOE)) ? 1UL : 0UL); +} + +/** + * @} + */ + + +/** @defgroup I2S_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if there enough data in FIFO to read a full packet + * @rmtoll SR RXP LL_I2S_IsActiveFlag_RXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXP(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXP(SPIx); +} + +/** + * @brief Check if there enough space in FIFO to hold a full packet + * @rmtoll SR TXP LL_I2S_IsActiveFlag_TXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXP(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXP(SPIx); +} + +/** + * @brief Get Underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_UDR(SPIx); +} + +/** + * @brief Get Overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get TI Frame format error flag + * @rmtoll SR TIFRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Clear Underrun error flag + * @rmtoll IFCR UDRC LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_UDR(SPIx); +} + +/** + * @brief Clear Overrun error flag + * @rmtoll IFCR OVRC LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear Frame format error flag + * @rmtoll IFCR TIFREC LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Rx Packet available IT + * @rmtoll IER RXPIE LL_I2S_EnableIT_RXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXP(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXP(SPIx); +} + +/** + * @brief Enable Tx Packet space available IT + * @rmtoll IER TXPIE LL_I2S_EnableIT_TXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXP(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXP(SPIx); +} + +/** + * @brief Enable Underrun IT + * @rmtoll IER UDRIE LL_I2S_EnableIT_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_UDR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_UDR(SPIx); +} + +/** + * @brief Enable Overrun IT + * @rmtoll IER OVRIE LL_I2S_EnableIT_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_OVR(SPIx); +} + +/** + * @brief Enable TI Frame Format Error IT + * @rmtoll IER TIFREIE LL_I2S_EnableIT_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_FRE(SPIx); +} + +/** + * @brief Disable Rx Packet available IT + * @rmtoll IER RXPIE LL_I2S_DisableIT_RXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXP(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXP(SPIx); +} + +/** + * @brief Disable Tx Packet space available IT + * @rmtoll IER TXPIE LL_I2S_DisableIT_TXP + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXP(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXP(SPIx); +} + +/** + * @brief Disable Underrun IT + * @rmtoll IER UDRIE LL_I2S_DisableIT_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_UDR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_UDR(SPIx); +} + +/** + * @brief Disable Overrun IT + * @rmtoll IER OVRIE LL_I2S_DisableIT_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_OVR(SPIx); +} + +/** + * @brief Disable TI Frame Format Error IT + * @rmtoll IER TIFREIE LL_I2S_DisableIT_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_FRE(SPIx); +} + +/** + * @brief Check if Rx Packet available IT is enabled + * @rmtoll IER RXPIE LL_I2S_IsEnabledIT_RXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXP(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXP(SPIx); +} + +/** + * @brief Check if Tx Packet space available IT is enabled + * @rmtoll IER TXPIE LL_I2S_IsEnabledIT_TXP + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXP(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXP(SPIx); +} + +/** + * @brief Check if Underrun IT is enabled + * @rmtoll IER UDRIE LL_I2S_IsEnabledIT_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_UDR(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_UDR(SPIx); +} + +/** + * @brief Check if Overrun IT is enabled + * @rmtoll IER OVRIE LL_I2S_IsEnabledIT_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_OVR(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_OVR(SPIx); +} + +/** + * @brief Check if TI Frame Format Error IT is enabled + * @rmtoll IER TIFREIE LL_I2S_IsEnabledIT_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_FRE(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CFG1 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CFG1 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CFG1 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CFG1 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CFG1 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CFG1 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0) + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(const SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA_Management DATA_Management + * @{ + */ + +/** + * @brief Read Data Register + * @rmtoll RXDR . LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval 0..0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) /* Derogation MISRAC2012-Rule-8.13 */ +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Read Data Register + * @rmtoll RXDR . LL_I2S_ReceiveData32 + * @param SPIx SPI Instance + * @retval 0..0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_I2S_ReceiveData32(SPI_TypeDef *SPIx) /* Derogation MISRAC2012-Rule-8.13 */ +{ + return LL_SPI_ReceiveData32(SPIx); +} + +/** + * @brief Write Data Register + * @rmtoll TXDR . LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData 0..0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @brief Write Data Register + * @rmtoll TXDR . LL_I2S_TransmitData32 + * @param SPIx SPI Instance + * @param TxData 0..0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData32(SPI_TypeDef *SPIx, uint32_t TxData) +{ + LL_SPI_TransmitData32(SPIx, TxData); +} + + +/** + * @} + */ + + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(const SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_SPI_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_system.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_system.h new file mode 100644 index 000000000..63f941de1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_system.h @@ -0,0 +1,2243 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SBS registers + (+) Access to VREFBUF registers + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_SYSTEM_H +#define STM32H7RSxx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SBS) || defined (DBGMCU) || defined (VREFBUF) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ +#define LL_SBS_REGISTER_PINPOS_SHFT 16U /*!< Define used to shift pin position in EXTICR register */ +#define LL_SBS_HDPL_INCREMENT_VALUE 0x6AU /*!< Define used for the HDPL increment */ +#define LL_SBS_DBG_UNLOCK (0xB4U << SBS_DBGCR_DBG_UNLOCK_Pos) /*!< Define used to unlock debug */ +#define LL_SBS_ACCESS_PORT_UNLOCK 0xB4U /*!< Define used to unlock access port */ +#define LL_SBS_DBG_CONFIG_LOCK 0xC3U /*!< Define used to lock debug configuration */ +#define LL_SBS_DBG_CONFIG_UNLOCK 0xB4U /*!< Define used to unlock debug configuration */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_SBS_HDPL SBS hide protection level + * @{ + */ +#define LL_SBS_HDPL0 0xB4U /*!< Hide protection level 0 */ +#define LL_SBS_HDPL1 0x51U /*!< Hide protection level 1 */ +#define LL_SBS_HDPL2 0x8AU /*!< Hide protection level 2 */ +#define LL_SBS_HDPL3 0x6FU /*!< Hide protection level 3 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_AXISRAM_WS SBS AXISRAM wait state number (when ECC=0) + * @{ + */ +#define LL_SBS_AXISRAM_NO_WS 0U /*!< No wait state added when accessing AXISRAM */ +#define LL_SBS_AXISRAM_ONE_WS SBS_PMCR_AXISRAM_WS /*!< One wait state added when accessing AXISRAM */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_ETH_PHYSEL SBS Ethernet PHY interface selection + * @{ + */ +#define LL_SBS_ETH_PHYSEL_GMII_MII 0U /*!< GMII or MII interface */ +#define LL_SBS_ETH_PHYSEL_RMII SBS_PMCR_ETH_PHYSEL_2 /*!< RMII interface */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_BOOSTVDDSEL SBS Booster Vdd selection + * @{ + */ +#define LL_SBS_BOOSTVDDSEL_VDDA 0U /*!< Vdda selected as analog switch booster voltage supply */ +#define LL_SBS_BOOSTVDDSEL_VDD SBS_PMCR_BOOSTVDDSEL /*!< Vdd selected as analog switch booster voltage supply */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_XSPI2_COMP_CODESEL SBS XSPI2 compensation cell code selection + * @{ + */ +#define LL_SBS_XSPI2_CODE_CELL 0U /*!< Code applied to compensation cell from cell */ +#define LL_SBS_XSPI2_CODE_REG SBS_CCCSR_XSPI2_COMP_CODESEL /*!< Code applied to compensation cell from register */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_XSPI1_COMP_CODESEL SBS XSPI1 compensation cell code selection + * @{ + */ +#define LL_SBS_XSPI1_CODE_CELL 0U /*!< Code applied to compensation cell from cell */ +#define LL_SBS_XSPI1_CODE_REG SBS_CCCSR_XSPI1_COMP_CODESEL /*!< Code applied to compensation cell from register */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_COMP_CODESEL SBS I/O compensation cell code selection + * @{ + */ +#define LL_SBS_IO_CODE_CELL 0U /*!< Code applied to compensation cell from cell */ +#define LL_SBS_IO_CODE_REG SBS_CCCSR_COMP_CODESEL /*!< Code applied to compensation cell from register */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_TIMBREAK SBS break lockup input timer peripherals + * @{ + */ +#define LL_SBS_TIMBREAK_PVD SBS_BKLOCKR_PVD_BL /*!< Connect the PVD output with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_FLASHECC SBS_BKLOCKR_FLASHECC_BL /*!< Connect the Flash ECC double error detection flag with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_CM7LCKUP SBS_BKLOCKR_CM7LCKUP_BL /*!< Connect the Cortex M7 lockup output with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_BKRAMECC SBS_BKLOCKR_BKRAMECC_BL /*!< Connect the Backup RAM ECC double error detection flag with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_DTCMECC SBS_BKLOCKR_DTCMECC_BL /*!< Connect the DTCM ECC double error detection flag with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_ITCMECC SBS_BKLOCKR_ITCMECC_BL /*!< Connect the ITCM ECC double error detection flag with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_ARAM3ECC SBS_BKLOCKR_ARAM3ECC_BL /*!< Connect the AXISRAM3 ECC double error detection flag with TIM1/15/16/17 break input */ +#define LL_SBS_TIMBREAK_ARAM1ECC SBS_BKLOCKR_ARAM1ECC_BL /*!< Connect the AXISRAM1 ECC double error detection flag with TIM1/15/16/17 break input */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_EXTI_PORT SBS EXTI PORT + * @{ + */ +#define LL_SBS_EXTI_PORTA 0U /*!< EXTI PORT A */ +#define LL_SBS_EXTI_PORTB SBS_EXTICR1_PC_EXTI0_0 /*!< EXTI PORT B */ +#define LL_SBS_EXTI_PORTC SBS_EXTICR1_PC_EXTI0_1 /*!< EXTI PORT C */ +#define LL_SBS_EXTI_PORTD (SBS_EXTICR1_PC_EXTI0_1 | SBS_EXTICR1_PC_EXTI0_0) /*!< EXTI PORT D */ +#define LL_SBS_EXTI_PORTE SBS_EXTICR1_PC_EXTI0_2 /*!< EXTI PORT E */ +#define LL_SBS_EXTI_PORTF (SBS_EXTICR1_PC_EXTI0_2 | SBS_EXTICR1_PC_EXTI0_0) /*!< EXTI PORT F */ +#define LL_SBS_EXTI_PORTG (SBS_EXTICR1_PC_EXTI0_2 | SBS_EXTICR1_PC_EXTI0_1) /*!< EXTI PORT G */ +#define LL_SBS_EXTI_PORTH (SBS_EXTICR1_PC_EXTI0_2 | SBS_EXTICR1_PC_EXTI0_1 | \ + SBS_EXTICR1_PC_EXTI0_0) /*!< EXTI PORT H */ +#define LL_SBS_EXTI_PORTM (SBS_EXTICR1_PC_EXTI0_3 | SBS_EXTICR1_PC_EXTI0_2) /*!< EXTI PORT M */ +#define LL_SBS_EXTI_PORTN (SBS_EXTICR1_PC_EXTI0_3 | SBS_EXTICR1_PC_EXTI0_2 | \ + SBS_EXTICR1_PC_EXTI0_0) /*!< EXTI PORT N */ +#define LL_SBS_EXTI_PORTO (SBS_EXTICR1_PC_EXTI0_3 | SBS_EXTICR1_PC_EXTI0_2 | \ + SBS_EXTICR1_PC_EXTI0_1) /*!< EXTI PORT 0 */ +#define LL_SBS_EXTI_PORTP (SBS_EXTICR1_PC_EXTI0_3 | SBS_EXTICR1_PC_EXTI0_2 | \ + SBS_EXTICR1_PC_EXTI0_1 | SBS_EXTICR1_PC_EXTI0_0) /*!< EXTI PORT P */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SBS_EXTI_LINE SBS EXTI LINE + * @{ + */ +#define LL_SBS_EXTI_LINE0 ((0U << LL_SBS_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SBS_EXTI_LINE1 ((4U << LL_SBS_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SBS_EXTI_LINE2 ((8U << LL_SBS_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_16 | EXTICR[0] */ +#define LL_SBS_EXTI_LINE3 ((12U << LL_SBS_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_24 | EXTICR[0] */ +#define LL_SBS_EXTI_LINE4 ((0U << LL_SBS_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SBS_EXTI_LINE5 ((4U << LL_SBS_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SBS_EXTI_LINE6 ((8U << LL_SBS_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_16 | EXTICR[1] */ +#define LL_SBS_EXTI_LINE7 ((12U << LL_SBS_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_24 | EXTICR[1] */ +#define LL_SBS_EXTI_LINE8 ((0U << LL_SBS_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SBS_EXTI_LINE9 ((4U << LL_SBS_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SBS_EXTI_LINE10 ((8U << LL_SBS_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_16 | EXTICR[2] */ +#define LL_SBS_EXTI_LINE11 ((12U << LL_SBS_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_24 | EXTICR[2] */ +#define LL_SBS_EXTI_LINE12 ((0U << LL_SBS_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SBS_EXTI_LINE13 ((4U << LL_SBS_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SBS_EXTI_LINE14 ((8U << LL_SBS_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_16 | EXTICR[3] */ +#define LL_SBS_EXTI_LINE15 ((12U << LL_SBS_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_24 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_DCRT DBGMCU Debug credential reset type + * @{ + */ +#define LL_DBGMCU_DCRT_SYSTEM 0U /*!< System reset revoke the debug authentication credentials */ +#define LL_DBGMCU_DCRT_POWER DBGMCU_CR_DCRT /*!< Power reset revoke the debug authentication credentials */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_AHB5_STOP DBGMCU AHB5 GRP1 STOP + * @{ + */ +#define LL_DBGMCU_AHB5_GRP1_HPDMA0_STOP DBGMCU_AHB5FZR_HPDMA_0 /*!< The counter clock of HPDMA0 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA1_STOP DBGMCU_AHB5FZR_HPDMA_1 /*!< The counter clock of HPDMA1 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA2_STOP DBGMCU_AHB5FZR_HPDMA_2 /*!< The counter clock of HPDMA2 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA3_STOP DBGMCU_AHB5FZR_HPDMA_3 /*!< The counter clock of HPDMA3 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA4_STOP DBGMCU_AHB5FZR_HPDMA_4 /*!< The counter clock of HPDMA4 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA5_STOP DBGMCU_AHB5FZR_HPDMA_5 /*!< The counter clock of HPDMA5 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA6_STOP DBGMCU_AHB5FZR_HPDMA_6 /*!< The counter clock of HPDMA6 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA7_STOP DBGMCU_AHB5FZR_HPDMA_7 /*!< The counter clock of HPDMA7 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA8_STOP DBGMCU_AHB5FZR_HPDMA_8 /*!< The counter clock of HPDMA8 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA9_STOP DBGMCU_AHB5FZR_HPDMA_9 /*!< The counter clock of HPDMAM9 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA10_STOP DBGMCU_AHB5FZR_HPDMA_10 /*!< The counter clock of HPDMAM10 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA11_STOP DBGMCU_AHB5FZR_HPDMA_11 /*!< The counter clock of HPDMAM11 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA12_STOP DBGMCU_AHB5FZR_HPDMA_12 /*!< The counter clock of HPDMAM12 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA13_STOP DBGMCU_AHB5FZR_HPDMA_13 /*!< The counter clock of HPDMAM13 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA14_STOP DBGMCU_AHB5FZR_HPDMA_14 /*!< The counter clock of HPDMAM14 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB5_GRP1_HPDMA15_STOP DBGMCU_AHB5FZR_HPDMA_15 /*!< The counter clock of HPDMAM15 is stopped when the core is halted*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_AHB1_STOP DBGMCU AHB1 GRP1 STOP + * @{ + */ +#define LL_DBGMCU_AHB1_GRP1_GPDMA0_STOP DBGMCU_AHB1FZR_GPDMA_0 /*!< The counter clock of GPDMA0 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA1_STOP DBGMCU_AHB1FZR_GPDMA_1 /*!< The counter clock of GPDMA1 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA2_STOP DBGMCU_AHB1FZR_GPDMA_2 /*!< The counter clock of GPDMA2 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA3_STOP DBGMCU_AHB1FZR_GPDMA_3 /*!< The counter clock of GPDMA3 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA4_STOP DBGMCU_AHB1FZR_GPDMA_4 /*!< The counter clock of GPDMA4 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA5_STOP DBGMCU_AHB1FZR_GPDMA_5 /*!< The counter clock of GPDMA5 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA6_STOP DBGMCU_AHB1FZR_GPDMA_6 /*!< The counter clock of GPDMA6 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA7_STOP DBGMCU_AHB1FZR_GPDMA_7 /*!< The counter clock of GPDMA7 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA8_STOP DBGMCU_AHB1FZR_GPDMA_8 /*!< The counter clock of GPDMA8 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA9_STOP DBGMCU_AHB1FZR_GPDMA_9 /*!< The counter clock of GPDMAM9 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA10_STOP DBGMCU_AHB1FZR_GPDMA_10 /*!< The counter clock of GPDMAM10 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA11_STOP DBGMCU_AHB1FZR_GPDMA_11 /*!< The counter clock of GPDMAM11 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA12_STOP DBGMCU_AHB1FZR_GPDMA_12 /*!< The counter clock of GPDMAM12 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA13_STOP DBGMCU_AHB1FZR_GPDMA_13 /*!< The counter clock of GPDMAM13 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA14_STOP DBGMCU_AHB1FZR_GPDMA_14 /*!< The counter clock of GPDMAM14 is stopped when the core is halted*/ +#define LL_DBGMCU_AHB1_GRP1_GPDMA15_STOP DBGMCU_AHB1FZR_GPDMA_15 /*!< The counter clock of GPDMAM15 is stopped when the core is halted*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_APB1_STOP DBGMCU APB1 GRP1 STOP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1FZR_TIM2 /*!< The counter clock of TIM2 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1FZR_TIM3 /*!< The counter clock of TIM3 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1FZR_TIM4 /*!< The counter clock of TIM4 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1FZR_TIM5 /*!< The counter clock of TIM5 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1FZR_TIM6 /*!< The counter clock of TIM6 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1FZR_TIM7 /*!< The counter clock of TIM7 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1FZR_TIM12 /*!< The counter clock of TIM12 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1FZR_TIM13 /*!< The counter clock of TIM13 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1FZR_TIM14 /*!< The counter clock of TIM14 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1FZR_LPTIM1 /*!< The counter clock of LPTIM1 is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1FZR_WWDG /*!< The window watchdog counter clock is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1FZR_I2C1 /*!< The I2C1 SMBus timeout is frozen*/ +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1FZR_I2C2 /*!< The I2C2 SMBus timeout is frozen*/ +#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1FZR_I2C3 /*!< The I2C3 SMBus timeout is frozen*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_APB2_STOP DBGMCU APB2 GRP1 STOP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZR_TIM1 /*!< The counter clock of TIM1 is stopped when the core is halted*/ +#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2FZR_TIM9 /*!< The counter clock of TIM9 is stopped when the core is halted*/ +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZR_TIM15 /*!< The counter clock of TIM15 is stopped when the core is halted*/ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZR_TIM16 /*!< The counter clock of TIM16 is stopped when the core is halted*/ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZR_TIM17 /*!< The counter clock of TIM17 is stopped when the core is halted*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_DBGMCU_APB4_STOP DBGMCU APB4 GRP1 STOP + * @{ + */ +#define LL_DBGMCU_APB4_GRP1_LPTIM2_STOP DBGMCU_APB4FZR_LPTIM2 /*!< The counter clock of LPTIM2 is stopped when the core is halted*/ +#define LL_DBGMCU_APB4_GRP1_LPTIM3_STOP DBGMCU_APB4FZR_LPTIM3 /*!< The counter clock of LPTIM2 is stopped when the core is halted*/ +#define LL_DBGMCU_APB4_GRP1_LPTIM4_STOP DBGMCU_APB4FZR_LPTIM4 /*!< The counter clock of LPTIM4 is stopped when the core is halted*/ +#define LL_DBGMCU_APB4_GRP1_LPTIM5_STOP DBGMCU_APB4FZR_LPTIM5 /*!< The counter clock of LPTIM5 is stopped when the core is halted*/ +#define LL_DBGMCU_APB4_GRP1_IWDG_STOP DBGMCU_APB4FZR_IWDG /*!< The counter clock of IWDG is stopped when the core is halted*/ +#define LL_DBGMCU_APB4_GRP1_RTC_STOP DBGMCU_APB4FZR_RTC /*!< The counter clock of RTC is stopped when the core is halted*/ +/** + * @} + */ + + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE + * @{ + */ +#define LL_VREFBUF_VOLTAGE_SCALE0 VREFBUF_CSR_VRS_OUT1 /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS_OUT2 /*!< Voltage reference scale 1 (VREF_OUT2) */ +#define LL_VREFBUF_VOLTAGE_SCALE2 VREFBUF_CSR_VRS_OUT3 /*!< Voltage reference scale 2 (VREF_OUT3) */ +#define LL_VREFBUF_VOLTAGE_SCALE3 VREFBUF_CSR_VRS_OUT4 /*!< Voltage reference scale 3 (VREF_OUT4) */ +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 0 /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 (FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) /*!< FLASH Three wait states */ +#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_2 /*!< FLASH Four wait states */ +#define LL_FLASH_LATENCY_5 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_0) /*!< FLASH Five wait state */ +#define LL_FLASH_LATENCY_6 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1) /*!< FLASH Six wait state */ +#define LL_FLASH_LATENCY_7 (FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) /*!< FLASH Seven wait states */ +#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_3 /*!< FLASH Eight wait states */ +#define LL_FLASH_LATENCY_9 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_0) /*!< FLASH Nine wait states */ +#define LL_FLASH_LATENCY_10 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_1) /*!< FLASH Ten wait state */ +#define LL_FLASH_LATENCY_11 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) /*!< FLASH Eleven wait state */ +#define LL_FLASH_LATENCY_12 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2) /*!< FLASH Twelve wait states */ +#define LL_FLASH_LATENCY_13 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_0) /*!< FLASH Thirteen wait states */ +#define LL_FLASH_LATENCY_14 (FLASH_ACR_LATENCY_3 | FLASH_ACR_LATENCY_2 | FLASH_ACR_LATENCY_1) /*!< FLASH Fourteen wait states */ +#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY /*!< FLASH Fifteen wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SBS SBS + * @{ + */ + +/** + * @brief Get initial vector for Cortex-M7 + * @rmtoll SBS_BOOTSR INITVTOR LL_SBS_GetBootAddress + * @retval Returned value is the physical boot address used by the Cortex-M7 after reset + */ +__STATIC_INLINE uint32_t LL_SBS_GetBootAddress(void) +{ + return (uint32_t)(READ_BIT(SBS->BOOTSR, SBS_BOOTSR_INITVTOR)); +} + +/** + * @brief Increment hide protection level + * @rmtoll SBS_HDPLCR INCR_HDPL LL_SBS_IncrementHDPL + * @retval None + */ +__STATIC_INLINE void LL_SBS_IncrementHDPL(void) +{ + MODIFY_REG(SBS->HDPLCR, SBS_HDPLCR_INCR_HDPL, LL_SBS_HDPL_INCREMENT_VALUE); +} + +/** + * @brief Get current hide protection level + * @rmtoll SBS_HDPLSR HDPL LL_SBS_GetCurrentHDPL + * @retval Returned value is the current hide protection level of the device: + * @arg @ref LL_SBS_HDPL0 + * @arg @ref LL_SBS_HDPL1 + * @arg @ref LL_SBS_HDPL2 + * @arg @ref LL_SBS_HDPL3 + */ +__STATIC_INLINE uint32_t LL_SBS_GetCurrentHDPL(void) +{ + return (uint32_t)(READ_BIT(SBS->HDPLSR, SBS_HDPLSR_HDPL)); +} + +/** + * @brief Set the authenticated debug hide protection level + * @rmtoll SBS_DBGCR DBG_AUTH_HDPL LL_SBS_SetAuthDbgHDPL + * @param Level This parameter can be one of the following values: + * @arg @ref LL_SBS_HDPL1 + * @arg @ref LL_SBS_HDPL2 + * @arg @ref LL_SBS_HDPL3 + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetAuthDbgHDPL(uint32_t Level) +{ + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_DBG_AUTH_HDPL, (Level << SBS_DBGCR_DBG_AUTH_HDPL_Pos)); +} + +/** + * @brief Get current hide protection level + * @rmtoll SBS_DBGCR DBG_AUTH_HDPL LL_SBS_GetAuthDbgHDPL + * @retval Returned value is the hide protection level where the authenticated debug is opened: + * @arg @ref LL_SBS_HDPL1 + * @arg @ref LL_SBS_HDPL2 + * @arg @ref LL_SBS_HDPL3 + */ +__STATIC_INLINE uint32_t LL_SBS_GetAuthDbgHDPL(void) +{ + return (uint32_t)(READ_BIT(SBS->DBGCR, SBS_DBGCR_DBG_AUTH_HDPL) >> SBS_DBGCR_DBG_AUTH_HDPL_Pos); +} + +/** + * @brief Unlock the debug + * @rmtoll SBS_DBGCR DBG_UNLOCK LL_SBS_UnlockDebug + * @retval None + */ +__STATIC_INLINE void LL_SBS_UnlockDebug(void) +{ + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_DBG_UNLOCK, LL_SBS_DBG_UNLOCK); +} + +/** + * @brief Check if the debug is unlocked + * @rmtoll SBS_DBGCR DBG_UNLOCK LL_SBS_IsUnlockedDebug + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsUnlockedDebug(void) +{ + return ((READ_BIT(SBS->DBGCR, SBS_DBGCR_DBG_UNLOCK) == LL_SBS_DBG_UNLOCK) ? 1UL : 0UL); +} + +/** + * @brief Unlock the access port + * @rmtoll SBS_DBGCR AP_UNLOCK LL_SBS_UnlockAccessPort + * @retval None + */ +__STATIC_INLINE void LL_SBS_UnlockAccessPort(void) +{ + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_AP_UNLOCK, LL_SBS_ACCESS_PORT_UNLOCK); +} + +/** + * @brief Check if the access port is unlocked + * @rmtoll SBS_DBGCR AP_UNLOCK LL_SBS_IsUnlockedAccessPort + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsUnlockedAccessPort(void) +{ + return ((READ_BIT(SBS->DBGCR, SBS_DBGCR_AP_UNLOCK) == LL_SBS_ACCESS_PORT_UNLOCK) ? 1UL : 0UL); +} + +/** + * @brief Lock the debug configuration + * @rmtoll SBS_DBGLOCKR DBGCFG_LOCK LL_SBS_LockDebugConfig + * @retval None + */ +__STATIC_INLINE void LL_SBS_LockDebugConfig(void) +{ + MODIFY_REG(SBS->DBGLOCKR, SBS_DBGLOCKR_DBGCFG_LOCK, LL_SBS_DBG_CONFIG_LOCK); +} + +/** + * @brief Unlock the debug configuration + * @rmtoll SBS_DBGLOCKR DBGCFG_LOCK LL_SBS_UnlockDebugConfig + * @retval None + */ +__STATIC_INLINE void LL_SBS_UnlockDebugConfig(void) +{ + MODIFY_REG(SBS->DBGLOCKR, SBS_DBGLOCKR_DBGCFG_LOCK, LL_SBS_DBG_CONFIG_UNLOCK); +} + +/** + * @brief Check if the debug configuration is unlocked + * @rmtoll SBS_DBGLOCKR DBGCFG_LOCK LL_SBS_IsUnlockedDebugConfig + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsUnlockedDebugConfig(void) +{ + return ((READ_BIT(SBS->DBGLOCKR, SBS_DBGLOCKR_DBGCFG_LOCK) == LL_SBS_DBG_CONFIG_UNLOCK) ? 1UL : 0UL); +} + +/** + * @brief Set the command to be passed to RSS + * @rmtoll SBS_RSSCMDR RSSCMD LL_SBS_SetRSSCmd + * @param Command This parameter can have a value between 0 and 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetRSSCmd(uint32_t Command) +{ + MODIFY_REG(SBS->RSSCMDR, SBS_RSSCMDR_RSSCMD, Command); +} + +/** + * @brief Get the command which will be passed to RSS + * @rmtoll SBS_RSSCMDR RSSCMD LL_SBS_GetRSSCmd + * @retval Returned value is the command which will be passed to RSS (value between 0 and 0xFFFF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetRSSCmd(void) +{ + return (uint32_t)(READ_BIT(SBS->RSSCMDR, SBS_RSSCMDR_RSSCMD)); +} + +/** + * @brief Set the number of AXISRAM wait state (when ECC=0) + * @rmtoll SBS_PMCR AXISRAM_WS LL_SBS_SetAXISRAMWaitState + * @param WaitState This parameter can be one of the following values: + * @arg @ref LL_SBS_AXISRAM_NO_WS + * @arg @ref LL_SBS_AXISRAM_ONE_WS + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetAXISRAMWaitState(uint32_t WaitState) +{ + MODIFY_REG(SBS->PMCR, SBS_PMCR_AXISRAM_WS, WaitState); +} + +/** + * @brief Get the number of AXISRAM wait state (when ECC=0) + * @rmtoll SBS_PMCR AXISRAM_WS LL_SBS_GetAXISRAMWaitState + * @retval Returned value is the number of wait state when accessing AXISRAM: + * @arg @ref LL_SBS_AXISRAM_NO_WS + * @arg @ref LL_SBS_AXISRAM_ONE_WS + */ +__STATIC_INLINE uint32_t LL_SBS_GetAXISRAMWaitState(void) +{ + return (uint32_t)(READ_BIT(SBS->PMCR, SBS_PMCR_AXISRAM_WS)); +} + +/** + * @brief Configure the Ethernet PHY interface + * @rmtoll SBS_PMCR ETH_PHYSEL LL_SBS_SetEthernetPhy + * @param Interface This parameter can be one of the following values: + * @arg @ref LL_SBS_ETH_PHYSEL_GMII_MII + * @arg @ref LL_SBS_ETH_PHYSEL_RMII + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetEthernetPhy(uint32_t Interface) +{ + MODIFY_REG(SBS->PMCR, SBS_PMCR_ETH_PHYSEL, Interface); +} + +/** + * @brief Get the selected Ethernet PHY interface + * @rmtoll SBS_PMCR ETH_PHYSEL LL_SBS_GetEthernetPhy + * @retval Returned value is the selected Ethernet PHY interface: + * @arg @ref LL_SBS_ETH_PHYSEL_GMII_MII + * @arg @ref LL_SBS_ETH_PHYSEL_RMII + */ +__STATIC_INLINE uint32_t LL_SBS_GetEthernetPhy(void) +{ + return (uint32_t)(READ_BIT(SBS->PMCR, SBS_PMCR_ETH_PHYSEL)); +} + +/** + * @brief Configure the analog switch supply voltage for booster + * @rmtoll SBS_PMCR BOOSTVDDSEL LL_SBS_SetBoosterVoltage + * @param Voltage This parameter can be one of the following values: + * @arg @ref LL_SBS_BOOSTVDDSEL_VDDA + * @arg @ref LL_SBS_BOOSTVDDSEL_VDD + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetBoosterVoltage(uint32_t Voltage) +{ + MODIFY_REG(SBS->PMCR, SBS_PMCR_BOOSTVDDSEL, Voltage); +} + +/** + * @brief Get the selected analog switch supply voltage for booster + * @rmtoll SBS_PMCR BOOSTVDDSEL LL_SBS_GetBoosterVoltage + * @retval Returned value is the selected analog switch supply voltage: + * @arg @ref LL_SBS_BOOSTVDDSEL_VDDA + * @arg @ref LL_SBS_BOOSTVDDSEL_VDD + */ +__STATIC_INLINE uint32_t LL_SBS_GetBoosterVoltage(void) +{ + return (uint32_t)(READ_BIT(SBS->PMCR, SBS_PMCR_BOOSTVDDSEL)); +} + +/** + * @brief Enable the booster + * @rmtoll SBS_PMCR BOOSTEN LL_SBS_EnableBooster + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableBooster(void) +{ + SET_BIT(SBS->PMCR, SBS_PMCR_BOOSTEN); +} + +/** + * @brief Disable the booster + * @rmtoll SBS_PMCR BOOSTEN LL_SBS_DisableBooster + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableBooster(void) +{ + CLEAR_BIT(SBS->PMCR, SBS_PMCR_BOOSTEN); +} + +/** + * @brief Check if the booster is enabled + * @rmtoll SBS_PMCR BOOSTEN LL_SBS_IsEnabledBooster + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledBooster(void) +{ + return ((READ_BIT(SBS->PMCR, SBS_PMCR_BOOSTEN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Enable Floating Point Unit Invalid operation Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_0 LL_SBS_EnableIT_FPU_IOC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_IOC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_0); +} + +/** + * @brief Enable Floating Point Unit Divide-by-zero Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_1 LL_SBS_EnableIT_FPU_DZC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_DZC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_1); +} + +/** + * @brief Enable Floating Point Unit Underflow Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_2 LL_SBS_EnableIT_FPU_UFC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_UFC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_2); +} + +/** + * @brief Enable Floating Point Unit Overflow Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_3 LL_SBS_EnableIT_FPU_OFC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_OFC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_3); +} + +/** + * @brief Enable Floating Point Unit Input denormal Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_4 LL_SBS_EnableIT_FPU_IDC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_IDC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_4); +} + +/** + * @brief Enable Floating Point Unit Inexact Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_5 LL_SBS_EnableIT_FPU_IXC + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIT_FPU_IXC(void) +{ + SET_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_5); +} + +/** + * @brief Disable Floating Point Unit Invalid operation Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_0 LL_SBS_DisableIT_FPU_IOC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_IOC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_0); +} + +/** + * @brief Disable Floating Point Unit Divide-by-zero Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_1 LL_SBS_DisableIT_FPU_DZC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_DZC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_1); +} + +/** + * @brief Disable Floating Point Unit Underflow Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_2 LL_SBS_DisableIT_FPU_UFC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_UFC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_2); +} + +/** + * @brief Disable Floating Point Unit Overflow Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_3 LL_SBS_DisableIT_FPU_OFC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_OFC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_3); +} + +/** + * @brief Disable Floating Point Unit Input denormal Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_4 LL_SBS_DisableIT_FPU_IDC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_IDC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_4); +} + +/** + * @brief Disable Floating Point Unit Inexact Interrupt + * @rmtoll SBS_FPUIMR FPU_IE_5 LL_SBS_DisableIT_FPU_IXC + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIT_FPU_IXC(void) +{ + CLEAR_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_5); +} + +/** + * @brief Check if Floating Point Unit Invalid operation Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_0 LL_SBS_IsEnabledIT_FPU_IOC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_IOC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_0) == SBS_FPUIMR_FPU_IE_0) ? 1UL : 0UL); +} + +/** + * @brief Check if Floating Point Unit Divide-by-zero Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_1 LL_SBS_IsEnabledIT_FPU_DZC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_DZC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_1) == SBS_FPUIMR_FPU_IE_1) ? 1UL : 0UL); +} + +/** + * @brief Check if Floating Point Unit Underflow Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_2 LL_SBS_IsEnabledIT_FPU_UFC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_UFC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_2) == SBS_FPUIMR_FPU_IE_2) ? 1UL : 0UL); +} + +/** + * @brief Check if Floating Point Unit Overflow Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_3 LL_SBS_IsEnabledIT_FPU_OFC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_OFC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_3) == SBS_FPUIMR_FPU_IE_3) ? 1UL : 0UL); +} + +/** + * @brief Check if Floating Point Unit Input denormal Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_4 LL_SBS_IsEnabledIT_FPU_IDC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_IDC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_4) == SBS_FPUIMR_FPU_IE_4) ? 1UL : 0UL); +} + +/** + * @brief Check if Floating Point Unit Inexact Interrupt source is enabled or disabled. + * @rmtoll SBS_FPUIMR FPU_IE_5 LL_SBS_IsEnabledIT_FPU_IXC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIT_FPU_IXC(void) +{ + return ((READ_BIT(SBS->FPUIMR, SBS_FPUIMR_FPU_IE_5) == SBS_FPUIMR_FPU_IE_5) ? 1UL : 0UL); +} + +/** + * @brief Check if the automatic erase of BKPRAM and PKARAM memories are done + * @rmtoll SBS_MESR MEF LL_SBS_IsDoneMemoryErase + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsDoneMemoryErase(void) +{ + return (READ_BIT(SBS->MESR, SBS_MESR_MEF)); +} + +/** + * @brief Enable the XSPI2 speed optimization + * @rmtoll SBS_CCCSR XSPI2_IOHSLV LL_SBS_EnableXSPI2SpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableXSPI2SpeedOptim(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_IOHSLV); +} + +/** + * @brief Disable the XSPI2 speed optimization + * @rmtoll SBS_CCCSR XSPI2_IOHSLV LL_SBS_DisableXSPI2SpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableXSPI2SpeedOptim(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_IOHSLV); +} + +/** + * @brief Check if the XSPI2 speed optimization is enabled + * @rmtoll SBS_CCCSR XSPI2_IOHSLV LL_SBS_IsEnabledXSPI2SpeedOptim + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledXSPI2SpeedOptim(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_IOHSLV) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Enable the XSPI1 speed optimization + * @rmtoll SBS_CCCSR XSPI1_IOHSLV LL_SBS_EnableXSPI1SpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableXSPI1SpeedOptim(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_IOHSLV); +} + +/** + * @brief Disable the XSPI1 speed optimization + * @rmtoll SBS_CCCSR XSPI1_IOHSLV LL_SBS_DisableXSPI1SpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableXSPI1SpeedOptim(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_IOHSLV); +} + +/** + * @brief Check if the XSPI1 speed optimization is enabled + * @rmtoll SBS_CCCSR XSPI1_IOHSLV LL_SBS_IsEnabledXSPI1SpeedOptim + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledXSPI1SpeedOptim(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_IOHSLV) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Enable the I/O speed optimization + * @rmtoll SBS_CCCSR IOHSLV LL_SBS_EnableIOSpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIOSpeedOptim(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_IOHSLV); +} + +/** + * @brief Disable the I/O speed optimization + * @rmtoll SBS_CCCSR IOHSLV LL_SBS_DisableIOSpeedOptim + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIOSpeedOptim(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_IOHSLV); +} + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll SBS_CCCSR IOHSLV LL_SBS_IsEnabledIOSpeedOptim + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIOSpeedOptim(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_IOHSLV) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Check if the XSPI2 compensation cell is ready + * @rmtoll SBS_CCCSR XSPI2_COMP_RDY LL_SBS_IsReadyXSPI2CompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsReadyXSPI2CompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_RDY) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Check if the XSPI1 compensation cell is ready + * @rmtoll SBS_CCCSR XSPI1_COMP_RDY LL_SBS_IsReadyXSPI1CompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsReadyXSPI1CompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_RDY) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Check if the I/O compensation cell is ready + * @rmtoll SBS_CCCSR COMP_RDY LL_SBS_IsReadyIOCompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsReadyIOCompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_COMP_RDY) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Configure the code for the XSPI2 compensation cell + * @rmtoll SBS_CCCSR XSPI2_COMP_CODESEL LL_SBS_SetXSPI2CompCellCode + * @param Code This parameter can be one of the following values: + * @arg @ref LL_SBS_XSPI2_CODE_CELL + * @arg @ref LL_SBS_XSPI2_CODE_REG + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI2CompCellCode(uint32_t Code) +{ + MODIFY_REG(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_CODESEL, Code); +} + +/** + * @brief Get the selected code for the XSPI2 compensation cell + * @rmtoll SBS_CCCSR XSPI2_COMP_CODESEL LL_SBS_GetXSPI2CompCellCode + * @retval Returned value is the selected code for the XSPI2 compensation cell: + * @arg @ref LL_SBS_XSPI2_CODE_CELL + * @arg @ref LL_SBS_XSPI2_CODE_REG + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI2CompCellCode(void) +{ + return (uint32_t)(READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_CODESEL)); +} + +/** + * @brief Enable the XSPI2 compensation cell + * @rmtoll SBS_PMCR XSPI2_COMP_EN LL_SBS_EnableXSPI2CompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableXSPI2CompCell(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_EN); +} + +/** + * @brief Disable the XSPI2 compensation cell + * @rmtoll SBS_CCCSR XSPI2_COMP_EN LL_SBS_DisableXSPI2CompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableXSPI2CompCell(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_EN); +} + +/** + * @brief Check if the XSPI2 compensation cell is enabled + * @rmtoll SBS_CCCSR XSPI2_COMP_EN LL_SBS_IsEnabledXSPI2CompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledXSPI2CompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI2_COMP_EN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Configure the code for the XSPI1 compensation cell + * @rmtoll SBS_CCCSR XSPI1_COMP_CODESEL LL_SBS_SetXSPI1CompCellCode + * @param Code This parameter can be one of the following values: + * @arg @ref LL_SBS_XSPI1_CODE_CELL + * @arg @ref LL_SBS_XSPI1_CODE_REG + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI1CompCellCode(uint32_t Code) +{ + MODIFY_REG(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_CODESEL, Code); +} + +/** + * @brief Get the selected code for the XSPI2 compensation cell + * @rmtoll SBS_CCCSR XSPI1_COMP_CODESEL LL_SBS_GetXSPI1CompCellCode + * @retval Returned value is the selected code for the XSPI1 compensation cell: + * @arg @ref LL_SBS_XSPI1_CODE_CELL + * @arg @ref LL_SBS_XSPI1_CODE_REG + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI1CompCellCode(void) +{ + return (uint32_t)(READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_CODESEL)); +} + +/** + * @brief Enable the XSPI1 compensation cell + * @rmtoll SBS_PMCR XSPI1_COMP_EN LL_SBS_EnableXSPI1CompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableXSPI1CompCell(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_EN); +} + +/** + * @brief Disable the XSPI1 compensation cell + * @rmtoll SBS_CCCSR XSPI1_COMP_EN LL_SBS_DisableXSPI1CompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableXSPI1CompCell(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_EN); +} + +/** + * @brief Check if the XSPI1 compensation cell is enabled + * @rmtoll SBS_CCCSR XSPI1_COMP_EN LL_SBS_IsEnabledXSPI1CompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledXSPI1CompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_XSPI1_COMP_EN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Configure the code for the I/O compensation cell + * @rmtoll SBS_CCCSR COMP_CODESEL LL_SBS_SetIOCompCellCode + * @param Code This parameter can be one of the following values: + * @arg @ref LL_SBS_IO_CODE_CELL + * @arg @ref LL_SBS_IO_CODE_REG + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetIOCompCellCode(uint32_t Code) +{ + MODIFY_REG(SBS->CCCSR, SBS_CCCSR_COMP_CODESEL, Code); +} + +/** + * @brief Get the selected code for the I/O compensation cell + * @rmtoll SBS_CCCSR COMP_CODESEL LL_SBS_GetIOCompCellCode + * @retval Returned value is the selected code for the I/O compensation cell: + * @arg @ref LL_SBS_IO_CODE_CELL + * @arg @ref LL_SBS_IO_CODE_REG + */ +__STATIC_INLINE uint32_t LL_SBS_GetIOCompCellCode(void) +{ + return (uint32_t)(READ_BIT(SBS->CCCSR, SBS_CCCSR_COMP_CODESEL)); +} + +/** + * @brief Enable the I/O compensation cell + * @rmtoll SBS_PMCR COMP_EN LL_SBS_EnableIOCompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_EnableIOCompCell(void) +{ + SET_BIT(SBS->CCCSR, SBS_CCCSR_COMP_EN); +} + +/** + * @brief Disable the I/O compensation cell + * @rmtoll SBS_CCCSR COMP_EN LL_SBS_DisableIOCompCell + * @retval None + */ +__STATIC_INLINE void LL_SBS_DisableIOCompCell(void) +{ + CLEAR_BIT(SBS->CCCSR, SBS_CCCSR_COMP_EN); +} + +/** + * @brief Check if the I/O compensation cell is enabled + * @rmtoll SBS_CCCSR COMP_EN LL_SBS_IsEnabledIOCompCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SBS_IsEnabledIOCompCell(void) +{ + return ((READ_BIT(SBS->CCCSR, SBS_CCCSR_COMP_EN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Get the XSPI2 PMOS compensation + * @rmtoll SBS_CCVALR XSPI2_PSRC LL_SBS_GetXSPI2PmosComp + * @retval Returned value is the slew-rate compensation for XSPI2 PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI2PmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCVALR, SBS_CCVALR_XSPI2_PSRC)) >> SBS_CCVALR_XSPI2_PSRC_Pos); +} + +/** + * @brief Get the XSPI2 NMOS compensation + * @rmtoll SBS_CCVALR XSPI2_NSRC LL_SBS_GetXSPI2NmosComp + * @retval Returned value is the slew-rate compensation for XSPI2 NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI2NmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCVALR, SBS_CCVALR_XSPI2_NSRC)) >> SBS_CCVALR_XSPI2_NSRC_Pos); +} + +/** + * @brief Get the XSPI1 PMOS compensation + * @rmtoll SBS_CCVALR XSPI1_PSRC LL_SBS_GetXSPI1PmosComp + * @retval Returned value is the slew-rate compensation for XSPI1 PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI1PmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCVALR, SBS_CCVALR_XSPI1_PSRC)) >> SBS_CCVALR_XSPI1_PSRC_Pos); +} + +/** + * @brief Get the XSPI NMOS compensation + * @rmtoll SBS_CCVALR XSPI1_NSRC LL_SBS_GetXSPI1NmosComp + * @retval Returned value is the slew-rate compensation for XSPI1 NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI1NmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCVALR, SBS_CCVALR_XSPI1_NSRC)) >> SBS_CCVALR_XSPI1_NSRC_Pos); +} + +/** + * @brief Get the I/O PMOS compensation + * @rmtoll SBS_CCVALR PSRC LL_SBS_GetIOPmosComp + * @retval Returned value is the slew-rate compensation for I/O PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetIOPmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCVALR, SBS_CCVALR_PSRC)) >> SBS_CCVALR_PSRC_Pos); +} + +/** + * @brief Get the I/O NMOS compensation + * @rmtoll SBS_CCVALR NSRC LL_SBS_GetIONmosComp + * @retval Returned value is the slew-rate compensation for I/O NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetIONmosComp(void) +{ + return (uint32_t)(READ_BIT(SBS->CCVALR, SBS_CCVALR_NSRC)); +} + +/** + * @brief Set the XSPI2 software PMOS compensation + * @rmtoll SBS_CCSWVALR XSPI2_SW_PSRC LL_SBS_SetXSPI2SwPmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI2SwPmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_XSPI2_SW_PSRC, (Compensation << SBS_CCSWVALR_XSPI2_SW_PSRC_Pos)); +} + +/** + * @brief Get the XSPI2 PMOS compensation + * @rmtoll SBS_CCSWVALR XSPI2_SW_PSRC LL_SBS_GetXSPI2SwPmosComp + * @retval Returned value is the slew-rate compensation for XSPI2 PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI2SwPmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_XSPI2_SW_PSRC)) >> SBS_CCSWVALR_XSPI2_SW_PSRC_Pos); +} + +/** + * @brief Set the XSPI2 software NMOS compensation + * @rmtoll SBS_CCSWVALR XSPI2_SW_NSRC LL_SBS_SetXSPI2SwNmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI2SwNmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_XSPI2_SW_NSRC, (Compensation << SBS_CCSWVALR_XSPI2_SW_NSRC_Pos)); +} + +/** + * @brief Get the XSPI2 software NMOS compensation + * @rmtoll SBS_CCSWVALR XSPI2_SW_NSRC LL_SBS_GetXSPI2SwNmosComp + * @retval Returned value is the slew-rate compensation for XSPI2 NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI2SwNmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_XSPI2_SW_NSRC)) >> SBS_CCSWVALR_XSPI2_SW_NSRC_Pos); +} + +/** + * @brief Set the XSPI1 software PMOS compensation + * @rmtoll SBS_CCSWVALR XSPI2_SW_PSRC LL_SBS_SetXSPI1SwPmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI1SwPmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_XSPI1_SW_PSRC, (Compensation << SBS_CCSWVALR_XSPI1_SW_PSRC_Pos)); +} + +/** + * @brief Get the XSPI1 PMOS compensation + * @rmtoll SBS_CCSWVALR XSPI1_SW_PSRC LL_SBS_GetXSPI1SwPmosComp + * @retval Returned value is the slew-rate compensation for XSPI1 PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI1SwPmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_XSPI1_SW_PSRC)) >> SBS_CCSWVALR_XSPI1_SW_PSRC_Pos); +} + +/** + * @brief Set the XSPI1 software NMOS compensation + * @rmtoll SBS_CCSWVALR XSPI1_SW_NSRC LL_SBS_SetXSPI1SwNmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetXSPI1SwNmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_XSPI1_SW_NSRC, (Compensation << SBS_CCSWVALR_XSPI1_SW_NSRC_Pos)); +} + +/** + * @brief Get the XSPI1 software NMOS compensation + * @rmtoll SBS_CCSWVALR XSPI1_SW_NSRC LL_SBS_GetXSPI1SwNmosComp + * @retval Returned value is the slew-rate compensation for XSPI1 NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetXSPI1SwNmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_XSPI1_SW_NSRC)) >> SBS_CCSWVALR_XSPI1_SW_NSRC_Pos); +} + +/** + * @brief Set the I/O software PMOS compensation + * @rmtoll SBS_CCSWVALR SW_PSRC LL_SBS_SetIOSwPmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetIOSwPmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_SW_PSRC, (Compensation << SBS_CCSWVALR_SW_PSRC_Pos)); +} + +/** + * @brief Get the I/O PMOS compensation + * @rmtoll SBS_CCSWVALR SW_PSRC LL_SBS_GetIOSwPmosComp + * @retval Returned value is the slew-rate compensation for I/O PMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetIOSwPmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_SW_PSRC)) >> SBS_CCSWVALR_SW_PSRC_Pos); +} + +/** + * @brief Set the I/O software NMOS compensation + * @rmtoll SBS_CCSWVALR SW_NSRC LL_SBS_SetIOSwNmosComp + * @param Compensation This parameter can have a value between 0 and 0xF + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetIOSwNmosComp(uint32_t Compensation) +{ + MODIFY_REG(SBS->CCSWVALR, SBS_CCSWVALR_SW_NSRC, (Compensation << SBS_CCSWVALR_SW_NSRC_Pos)); +} + +/** + * @brief Get the I/O software NMOS compensation + * @rmtoll SBS_CCSWVALR SW_NSRC LL_SBS_GetIOSwNmosComp + * @retval Returned value is the slew-rate compensation for I/O NMOS transistors (value between 0 and 0xF) + */ +__STATIC_INLINE uint32_t LL_SBS_GetIOSwNmosComp(void) +{ + return (uint32_t)((READ_BIT(SBS->CCSWVALR, SBS_CCSWVALR_SW_NSRC)) >> SBS_CCSWVALR_SW_NSRC_Pos); +} + +/** + * @brief Set connections to TIM1/15/16/17 Break inputs + * @rmtoll SBS_BKLOCKR PVD_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR FLASHECC_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR CM7LCKUP_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR BKRAMECC_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR DTCMECC_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR ITCMECC_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR ARAM3ECC_BL LL_SBS_SetTIMBreakInputs\n + * SBS_BKLOCKR ARAM1ECC_BL LL_SBS_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SBS_TIMBREAK_PVD + * @arg @ref LL_SBS_TIMBREAK_FLASHECC + * @arg @ref LL_SBS_TIMBREAK_CM7LCKUP + * @arg @ref LL_SBS_TIMBREAK_BKRAMECC + * @arg @ref LL_SBS_TIMBREAK_DTCMECC + * @arg @ref LL_SBS_TIMBREAK_ITCMECC + * @arg @ref LL_SBS_TIMBREAK_ARAM3ECC + * @arg @ref LL_SBS_TIMBREAK_ARAM1ECC + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetTIMBreakInputs(uint32_t Break) +{ + MODIFY_REG(SBS->BKLOCKR, + (SBS_BKLOCKR_PVD_BL | SBS_BKLOCKR_FLASHECC_BL | SBS_BKLOCKR_CM7LCKUP_BL | SBS_BKLOCKR_BKRAMECC_BL | \ + SBS_BKLOCKR_DTCMECC_BL | SBS_BKLOCKR_ITCMECC_BL | SBS_BKLOCKR_ARAM3ECC_BL | SBS_BKLOCKR_ARAM1ECC_BL) + , Break); +} + +/** + * @brief Get connections to TIM1/15/16/17 Break inputs + * @rmtoll SBS_BKLOCKR CLL LL_SBS_GetTIMBreakInputs\n + * SBS_BKLOCKR SPL LL_SBS_GetTIMBreakInputs\n + * SBS_BKLOCKR PVDL LL_SBS_GetTIMBreakInputs\n + * SBS_BKLOCKR ECCL LL_SBS_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SBS_TIMBREAK_PVD + * @arg @ref LL_SBS_TIMBREAK_FLASHECC + * @arg @ref LL_SBS_TIMBREAK_CM7LCKUP + * @arg @ref LL_SBS_TIMBREAK_BKRAMECC + * @arg @ref LL_SBS_TIMBREAK_DTCMECC + * @arg @ref LL_SBS_TIMBREAK_ITCMECC + * @arg @ref LL_SBS_TIMBREAK_ARAM3ECC + * @arg @ref LL_SBS_TIMBREAK_ARAM1ECC + */ +__STATIC_INLINE uint32_t LL_SBS_GetTIMBreakInputs(void) +{ + return (uint32_t)(READ_BIT(SBS->BKLOCKR, + (SBS_BKLOCKR_PVD_BL | SBS_BKLOCKR_FLASHECC_BL | SBS_BKLOCKR_CM7LCKUP_BL | \ + SBS_BKLOCKR_BKRAMECC_BL | SBS_BKLOCKR_DTCMECC_BL | SBS_BKLOCKR_ITCMECC_BL | \ + SBS_BKLOCKR_ARAM3ECC_BL | SBS_BKLOCKR_ARAM1ECC_BL))); +} + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SBS_EXTICR1 EXTI0 LL_SBS_SetEXTISource\n + * SBS_EXTICR1 EXTI1 LL_SBS_SetEXTISource\n + * SBS_EXTICR1 EXTI2 LL_SBS_SetEXTISource\n + * SBS_EXTICR1 EXTI3 LL_SBS_SetEXTISource\n + * SBS_EXTICR2 EXTI4 LL_SBS_SetEXTISource\n + * SBS_EXTICR2 EXTI5 LL_SBS_SetEXTISource\n + * SBS_EXTICR2 EXTI6 LL_SBS_SetEXTISource\n + * SBS_EXTICR2 EXTI7 LL_SBS_SetEXTISource\n + * SBS_EXTICR3 EXTI8 LL_SBS_SetEXTISource\n + * SBS_EXTICR3 EXTI9 LL_SBS_SetEXTISource\n + * SBS_EXTICR3 EXTI10 LL_SBS_SetEXTISource\n + * SBS_EXTICR3 EXTI11 LL_SBS_SetEXTISource\n + * SBS_EXTICR4 EXTI12 LL_SBS_SetEXTISource\n + * SBS_EXTICR4 EXTI13 LL_SBS_SetEXTISource\n + * SBS_EXTICR4 EXTI14 LL_SBS_SetEXTISource\n + * SBS_EXTICR4 EXTI15 LL_SBS_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SBS_EXTI_PORTA + * @arg @ref LL_SBS_EXTI_PORTB + * @arg @ref LL_SBS_EXTI_PORTC + * @arg @ref LL_SBS_EXTI_PORTD + * @arg @ref LL_SBS_EXTI_PORTE + * @arg @ref LL_SBS_EXTI_PORTF + * @arg @ref LL_SBS_EXTI_PORTG + * @arg @ref LL_SBS_EXTI_PORTH + * @arg @ref LL_SBS_EXTI_PORTM + * @arg @ref LL_SBS_EXTI_PORTN + * @arg @ref LL_SBS_EXTI_PORTO + * @arg @ref LL_SBS_EXTI_PORTP + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SBS_EXTI_LINE0 + * @arg @ref LL_SBS_EXTI_LINE1 + * @arg @ref LL_SBS_EXTI_LINE2 + * @arg @ref LL_SBS_EXTI_LINE3 + * @arg @ref LL_SBS_EXTI_LINE4 + * @arg @ref LL_SBS_EXTI_LINE5 + * @arg @ref LL_SBS_EXTI_LINE6 + * @arg @ref LL_SBS_EXTI_LINE7 + * @arg @ref LL_SBS_EXTI_LINE8 + * @arg @ref LL_SBS_EXTI_LINE9 + * @arg @ref LL_SBS_EXTI_LINE10 + * @arg @ref LL_SBS_EXTI_LINE11 + * @arg @ref LL_SBS_EXTI_LINE12 + * @arg @ref LL_SBS_EXTI_LINE13 + * @arg @ref LL_SBS_EXTI_LINE14 + * @arg @ref LL_SBS_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SBS_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SBS->EXTICR[Line & 0x03U], + SBS_EXTICR1_PC_EXTI0 << (Line >> LL_SBS_REGISTER_PINPOS_SHFT), + Port << (Line >> LL_SBS_REGISTER_PINPOS_SHFT)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SBS_EXTICR1 EXTI0 LL_SBS_GetEXTISource\n + * SBS_EXTICR1 EXTI1 LL_SBS_GetEXTISource\n + * SBS_EXTICR1 EXTI2 LL_SBS_GetEXTISource\n + * SBS_EXTICR1 EXTI3 LL_SBS_GetEXTISource\n + * SBS_EXTICR2 EXTI4 LL_SBS_GetEXTISource\n + * SBS_EXTICR2 EXTI5 LL_SBS_GetEXTISource\n + * SBS_EXTICR2 EXTI6 LL_SBS_GetEXTISource\n + * SBS_EXTICR2 EXTI7 LL_SBS_GetEXTISource\n + * SBS_EXTICR3 EXTI8 LL_SBS_GetEXTISource\n + * SBS_EXTICR3 EXTI9 LL_SBS_GetEXTISource\n + * SBS_EXTICR3 EXTI10 LL_SBS_GetEXTISource\n + * SBS_EXTICR3 EXTI11 LL_SBS_GetEXTISource\n + * SBS_EXTICR4 EXTI12 LL_SBS_GetEXTISource\n + * SBS_EXTICR4 EXTI13 LL_SBS_GetEXTISource\n + * SBS_EXTICR4 EXTI14 LL_SBS_GetEXTISource\n + * SBS_EXTICR4 EXTI15 LL_SBS_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SBS_EXTI_LINE0 + * @arg @ref LL_SBS_EXTI_LINE1 + * @arg @ref LL_SBS_EXTI_LINE2 + * @arg @ref LL_SBS_EXTI_LINE3 + * @arg @ref LL_SBS_EXTI_LINE4 + * @arg @ref LL_SBS_EXTI_LINE5 + * @arg @ref LL_SBS_EXTI_LINE6 + * @arg @ref LL_SBS_EXTI_LINE7 + * @arg @ref LL_SBS_EXTI_LINE8 + * @arg @ref LL_SBS_EXTI_LINE9 + * @arg @ref LL_SBS_EXTI_LINE10 + * @arg @ref LL_SBS_EXTI_LINE11 + * @arg @ref LL_SBS_EXTI_LINE12 + * @arg @ref LL_SBS_EXTI_LINE13 + * @arg @ref LL_SBS_EXTI_LINE14 + * @arg @ref LL_SBS_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SBS_EXTI_PORTA + * @arg @ref LL_SBS_EXTI_PORTB + * @arg @ref LL_SBS_EXTI_PORTC + * @arg @ref LL_SBS_EXTI_PORTD + * @arg @ref LL_SBS_EXTI_PORTE + * @arg @ref LL_SBS_EXTI_PORTF + * @arg @ref LL_SBS_EXTI_PORTG + * @arg @ref LL_SBS_EXTI_PORTH + * @arg @ref LL_SBS_EXTI_PORTM + * @arg @ref LL_SBS_EXTI_PORTN + * @arg @ref LL_SBS_EXTI_PORTO + * @arg @ref LL_SBS_EXTI_PORTP + */ +__STATIC_INLINE uint32_t LL_SBS_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SBS->EXTICR[Line & 0x03U], + (SBS_EXTICR1_PC_EXTI0 << (Line >> LL_SBS_REGISTER_PINPOS_SHFT))) >> (Line >> LL_SBS_REGISTER_PINPOS_SHFT)); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF (ex: device ID is 0x6415) + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during sleep mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during sleep mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Indicate if the Debug Module during sleep mode is enabled + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_IsEnabledDBGSleepMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGSleepMode(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP) == (DBGMCU_CR_DBG_SLEEP)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Indicate if the Debug Module during STOP mode is enabled + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_IsEnabledDBGStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGStopMode(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP) == (DBGMCU_CR_DBG_STOP)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Indicate if the Debug Module during STANDBY mode is enabled + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_IsEnabledDBGStandbyMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGStandbyMode(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY) == (DBGMCU_CR_DBG_STANDBY)) ? 1UL : 0UL); +} + +/** + * @brief Configure the debug credentials reset type + * @rmtoll DBGMCU_CR DCRT LL_DBGMCU_SetDbgCredentialResetType + * @param Type This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_DCRT_SYSTEM + * @arg @ref LL_DBGMCU_DCRT_POWER + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetDbgCredentialResetType(uint32_t Type) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DCRT, Type); +} + +/** + * @brief Get the selected debug credentials reset type + * @rmtoll DBGMCU_CR DCRT LL_DBGMCU_GetDbgCredentialResetType + * @retval Returned value is the debug credentials reset type: + * @arg @ref LL_DBGMCU_DCRT_SYSTEM + * @arg @ref LL_DBGMCU_DCRT_POWER + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDbgCredentialResetType(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_DCRT)); +} + +/** + * @brief Enable the clock for Trace port + * @rmtoll DBGMCU_CR TRACECLKEN LL_DBGMCU_EnableTraceClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableTraceClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_TRACECLKEN); +} + +/** + * @brief Disable the clock for Trace port + * @rmtoll DBGMCU_CR TRACECLKEN LL_DBGMCU_DisableTraceClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableTraceClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_TRACECLKEN); +} + +/** + * @brief Indicate if the clock for Trace port is enabled + * @rmtoll DBGMCU_CR TRACE_EN LL_DBGMCU_IsEnabledTraceClock + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledTraceClock(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACECLKEN) == (DBGMCU_CR_TRACECLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the clock for debug port + * @rmtoll DBGMCU_CR D1DBGCKEN LL_DBGMCU_EnableDebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDebugClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBGCKEN); +} + +/** + * @brief Disable the clock for debug port + * @rmtoll DBGMCU_CR D1DBGCKEN LL_DBGMCU_DisableDebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDebugClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBGCKEN); +} + +/** + * @brief Indicate if the clock for debug port is enabled + * @rmtoll DBGMCU_CR D1DBGCKEN LL_DBGMCU_IsEnabledDebugClock + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDebugClock(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBGCKEN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Enable the external trigger output + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_EnableTriggerOutput + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableTriggerOutput(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_TRGOEN); +} + +/** + * @brief Disable the external trigger output + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_DisableTriggerOutput + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableTriggerOutput(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_TRGOEN); +} + +/** + * @brief Indicate if the external trigger output is enabled + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_IsEnabledTriggerOutput + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledTriggerOutput(void) +{ + return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_TRGOEN) != 0UL) ? 1UL : 0UL); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZR, Periphs); +} + +/** + * @brief UnFreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZR, Periphs); +} + +/** + * @brief Freeze APB4 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB4FZR DBG_xxxx_STOP LL_DBGMCU_APB4_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB4FZR, Periphs); +} + +/** + * @brief UnFreeze APB4 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB4FZR DBG_xxxx_STOP LL_DBGMCU_APB4_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB4FZR, Periphs); +} + +/** + * @brief freeze APB2 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB2FZR DBG_xxxx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZR, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZR DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZR, Periphs); +} + +/** + * @brief freeze AHB5 peripherals (group1 peripherals) + * @rmtoll DBGMCU_AHB5FZR DBG_xxxx_STOP LL_DBGMCU_AHB5_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA0_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA1_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA2_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA3_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA4_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA5_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA6_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA7_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA8_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA9_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA10_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA11_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA12_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA13_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA14_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA15_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_AHB5_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->AHB5FZR, Periphs); +} + +/** + * @brief Unfreeze AHB5 peripherals (group1 peripherals) + * @rmtoll DBGMCU_AHB5FZR DBG_xxxx_STOP LL_DBGMCU_AHB5_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA0_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA1_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA2_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA3_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA4_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA5_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA6_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA7_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA8_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA9_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA10_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA11_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA12_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA13_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA14_STOP + * @arg @ref LL_DBGMCU_AHB5_GRP1_HPDMA15_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_AHB5_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->AHB5FZR, Periphs); +} + +/** + * @brief freeze AHB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_AHB1FZR DBG_xxxx_STOP LL_DBGMCU_AHB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA0_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA1_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA2_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA3_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA4_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA5_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA6_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA7_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA8_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA9_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA10_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA11_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA12_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA13_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA14_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA15_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_AHB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->AHB1FZR, Periphs); +} + +/** + * @brief Unfreeze AHB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_AHB1FZR DBG_xxxx_STOP LL_DBGMCU_AHB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA0_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA1_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA2_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA3_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA4_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA5_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA6_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA7_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA8_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA9_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA10_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA11_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA12_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA13_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA14_STOP + * @arg @ref LL_DBGMCU_AHB1_GRP1_GPDMA15_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_AHB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->AHB1FZR, Periphs); +} + +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF + * @{ + */ + +/** + * @brief Enable Internal voltage reference + * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Enable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Enable(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Disable Internal voltage reference + * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Disable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Disable(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Enable high impedance (VREF+pin is high impedance) + * @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_EnableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output) + * @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_DisableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Set the Voltage reference scale + * @rmtoll VREFBUF_CSR VRS LL_VREFBUF_SetVoltageScaling + * @param Scale This parameter can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE2 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE3 + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale) +{ + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale); +} + +/** + * @brief Get the Voltage reference scale + * @rmtoll VREFBUF_CSR VRS LL_VREFBUF_GetVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE2 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE3 + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS)); +} + +/** + * @brief Check if Voltage reference buffer is ready + * @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void) +{ + return ((READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == VREFBUF_CSR_VRR) ? 1UL : 0UL); +} + +/** + * @brief Get the trimming code for VREFBUF calibration + * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_GetTrimming + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM)); +} + +/** + * @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) + * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_SetTrimming + * @param Value Between 0 and 0x3F + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value) +{ + WRITE_REG(VREFBUF->CCR, Value); +} + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @arg @ref LL_FLASH_LATENCY_8 + * @arg @ref LL_FLASH_LATENCY_9 + * @arg @ref LL_FLASH_LATENCY_10 + * @arg @ref LL_FLASH_LATENCY_11 + * @arg @ref LL_FLASH_LATENCY_12 + * @arg @ref LL_FLASH_LATENCY_13 + * @arg @ref LL_FLASH_LATENCY_14 + * @arg @ref LL_FLASH_LATENCY_15 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @arg @ref LL_FLASH_LATENCY_8 + * @arg @ref LL_FLASH_LATENCY_9 + * @arg @ref LL_FLASH_LATENCY_10 + * @arg @ref LL_FLASH_LATENCY_11 + * @arg @ref LL_FLASH_LATENCY_12 + * @arg @ref LL_FLASH_LATENCY_13 + * @arg @ref LL_FLASH_LATENCY_14 + * @arg @ref LL_FLASH_LATENCY_15 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Unlock the Flash + * @rmtoll FLASH_KEYR CUKEY LL_FLASH_Unlock + * @retval None + */ +__STATIC_INLINE void LL_FLASH_Unlock(void) +{ + /* Unlock Flash */ + FLASH->KEYR = 0x45670123U; + FLASH->KEYR = 0xCDEF89ABU; +} + +/** + * @brief Lock the Flash + * @rmtoll FLASH_CR LOCK LL_FLASH_Lock + * @retval None + */ +__STATIC_INLINE void LL_FLASH_Lock(void) +{ + /* Lock Flash */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); +} + +/** + * @brief Check if Flash is locked + * @rmtoll FLASH_CR LOCK LL_FLASH_IsLocked + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsLocked(void) +{ + return ((READ_BIT(FLASH->CR, FLASH_CR_LOCK) == FLASH_CR_LOCK) ? 1UL : 0UL); +} + +/** + * @brief Unlock the Option Bytes update + * @rmtoll FLASH_OPTKEYR OCUKEY LL_FLASH_OptionBytes_Unlock + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_Unlock(void) +{ + /* Unlock Option Bytes */ + FLASH->OPTKEYR = 0x08192A3BU; + FLASH->OPTKEYR = 0x4C5D6E7FU; +} + +/** + * @brief Lock the Option Bytes update + * @rmtoll FLASH_OPTCR OPTLOCK LL_FLASH_OptionBytes_Lock + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_Lock(void) +{ + /* Lock option bytes */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK); +} + +/** + * @brief Check if Option Bytes update is locked + * @rmtoll FLASH_OPTCR OPTLOCK LL_FLASH_OptionBytes_IsLocked + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_OptionBytes_IsLocked(void) +{ + return ((READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) == FLASH_OPTCR_OPTLOCK) ? 1UL : 0UL); +} + +/** + * @brief Enable Option Bytes programming + * @rmtoll FLASH_OPTCR PG_OPT LL_FLASH_OptionBytes_EnableProg + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_EnableProg(void) +{ + /* Set PG_OPT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); +} + +/** + * @brief Disable Option Bytes programming + * @rmtoll FLASH_OPTCR PG_OPT LL_FLASH_OptionBytes_DisableProg + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_DisableProg(void) +{ + /* Clear PG_OPT Bit */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); +} + +/** + * @brief Check if Option Bytes programming is enabled + * @rmtoll FLASH_OPTCR PG_OPT LL_FLASH_OptionBytes_IsEnabledProg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_OptionBytes_IsEnabledProg(void) +{ + return ((READ_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT) == FLASH_OPTCR_PG_OPT) ? 1UL : 0UL); +} + +/** + * @brief Check if operation pending + * @rmtoll FLASH_SR QW LL_FLASH_IsPendingOperation + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPendingOperation(void) +{ + return ((READ_BIT(FLASH->SR, FLASH_SR_QW) == FLASH_SR_QW) ? 1UL : 0UL); +} + +/** + * @brief Enable the I2C in Flash User Option bytes + * @rmtoll FLASH_OBW2SR I2C_NI3C LL_FLASH_OptionBytes_EnableI2C + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_EnableI2C(void) +{ + /* Set I2C_N3C Bit */ + SET_BIT(FLASH->OBW2SRP, FLASH_OBW2SRP_I2C_NI3C); +} + +/** + * @brief Enable the I3C in Flash User Option bytes + * @rmtoll FLASH_OBW2SR I2C_NI3C LL_FLASH_OptionBytes_EnableI3C + * @retval None + */ +__STATIC_INLINE void LL_FLASH_OptionBytes_EnableI3C(void) +{ + /* Clear I2C_N3C Bit */ + CLEAR_BIT(FLASH->OBW2SRP, FLASH_OBW2SRP_I2C_NI3C); +} + +/** + * @brief Check if I2C is enabled in Flash User Option Bytes + * @rmtoll FLASH_OBW2SR I2C_NI3C LL_FLASH_OptionBytes_IsI2CEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_OptionBytes_IsI2CEnabled(void) +{ + return ((READ_BIT(FLASH->OBW2SR, FLASH_OBW2SR_I2C_NI3C) == FLASH_OBW2SR_I2C_NI3C) ? 1UL : 0UL); +} + +/** + * @brief Check if I3C is enabled in Flash User Option Bytes + * @rmtoll FLASH_OBW2SR I2C_NI3C LL_FLASH_OptionBytes_IsI3CEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_OptionBytes_IsI3CEnabled(void) +{ + return ((READ_BIT(FLASH->OBW2SR, FLASH_OBW2SR_I2C_NI3C) == 0U) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SBS) || defined (DBGMCU) || defined (VREFBUF) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_SYSTEM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_tim.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_tim.h new file mode 100644 index 000000000..1a65673d3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_tim.h @@ -0,0 +1,6101 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7RSxx_LL_TIM_H +#define __STM32H7RSxx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM9) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U, /* 6: TIMx_CH4 */ + 0x04U, /* 7: TIMx_CH4N */ + 0x38U, /* 8: TIMx_CH5 */ + 0x38U /* 9: TIMx_CH6 */ + +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U, /* 6: OC4M, OC4FE, OC4PE */ + 0U, /* 7: - NA */ + 0U, /* 8: OC5M, OC5FE, OC5PE */ + 8U /* 9: OC6M, OC6FE, OC6PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U, /* 6: CC4S, IC4PSC, IC4F */ + 0U, /* 7: - NA */ + 0U, /* 8: - NA */ + 0U /* 9: - NA */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U, /* 6: CC4P */ + 14U, /* 7: CC4NP */ + 16U, /* 8: CC5P */ + 20U /* 9: CC6P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U, /* 6: OIS4 */ + 7U, /* 7: OIS4N */ + 8U, /* 8: OIS5 */ + 10U /* 9: OIS6 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets */ +#define TIM_POSITION_BRK_SOURCE (POSITION_VAL(Source) & 0x1FUL) + +/* Generic bit definitions for TIMx_AF1 register */ +#define TIMx_AF1_BKINP TIM_AF1_BKINP /*!< BRK BKIN input polarity */ +#define TIMx_AF1_ETRSEL TIM_AF1_ETRSEL /*!< TIMx ETR source selection */ + + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +/** +@endcond + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH4) ? 6U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH4N) ? 7U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH5) ? 8U : 9U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakFilter; /*!< Specifies the TIM Break Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_ConfigBRK() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_AFMODE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_ConfigBRK2() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_CC5IF TIM_SR_CC5IF /*!< Capture/compare 5 interrupt flag */ +#define LL_TIM_SR_CC6IF TIM_SR_CC6IF /*!< Capture/compare 6 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_B2IF TIM_SR_B2IF /*!< Second break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +#define LL_TIM_SR_SBIF TIM_SR_SBIF /*!< System Break interrupt flag */ +#define LL_TIM_SR_IDXF TIM_SR_IDXF /*!< Index interrupt flag */ +#define LL_TIM_SR_DIRF TIM_SR_DIRF /*!< Direction Change interrupt flag */ +#define LL_TIM_SR_IERRF TIM_SR_IERRF /*!< Index Error flag */ +#define LL_TIM_SR_TERRF TIM_SR_TERRF /*!< Transition Error flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_BREAK2_ENABLE Break2 Enable + * @{ + */ +#define LL_TIM_BREAK2_DISABLE 0x00000000U /*!< Break2 function disabled */ +#define LL_TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break2 function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +#define LL_TIM_DIER_IDXIE TIM_DIER_IDXIE /*!< Index interrupt enable */ +#define LL_TIM_DIER_DIRIE TIM_DIER_DIRIE /*!< Direction Change interrupt enable */ +#define LL_TIM_DIER_IERRIE TIM_DIER_IERRIE /*!< Index Error interrupt enable */ +#define LL_TIM_DIER_TERRIE TIM_DIER_TERRIE /*!< Transition Error interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as upcounter */ +#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ +#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ +#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ +#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division + * @{ + */ +#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction + * @{ + */ +#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ +#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source + * @{ + */ +#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ +#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request + * @{ + */ +#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ +#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level + * @{ + */ +#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ +#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CHANNEL Channel + * @{ + */ +#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ +#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ +#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ +#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ +#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ +#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ +#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ +#define LL_TIM_CHANNEL_CH4N TIM_CCER_CC4NE /*!< Timer complementary output channel 4 */ +#define LL_TIM_CHANNEL_CH5 TIM_CCER_CC5E /*!< Timer output channel 5 */ +#define LL_TIM_CHANNEL_CH6 TIM_CCER_CC6E /*!< Timer output channel 6 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State + * @{ + */ +#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ +#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +#define LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASYMMETRIC_PWM1 +#define LL_TIM_OCMODE_ASSYMETRIC_PWM2 LL_TIM_OCMODE_ASYMMETRIC_PWM2 +/** +@endcond + */ + +/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode + * @{ + */ +#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @brief HELPER macro retrieving the UIFCPY flag from the counter value. + * @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ()); + * @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied + * to TIMx_CNT register bit 31) + * @param __CNT__ Counter value + * @retval UIF status bit + */ +#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \ + (READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos) + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required + * output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR_DITHER(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? \ + (uint32_t)((((uint64_t)(__TIMCLK__) * 16U/((__FREQ__) * ((__PSC__) + 1U))) - 16U)) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer + * output compare active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY_DITHER(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__) * 16U) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required + * pulse duration (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE_DITHER(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY_DITHER((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY_DITHER((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note If dithering is activated, pay attention to the Counter value interpretation + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note If dithering is activated, pay attention to the Counter value interpretation + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * In case dithering is activated,macro __LL_TIM_CALC_ARR_DITHER can be used instead, to calculate the AutoReload + * parameter. + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note If dithering is activated, pay attention to the returned value interpretation + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note For advanced timer instances RepetitionCounter can be up to 65535. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) copy is set. + * @param Counter Counter value + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(const uint32_t Counter) +{ + return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL); +} + +/** + * @brief Enable dithering. + * @note Macro IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides dithering. + * @rmtoll CR1 DITHEN LL_TIM_EnableDithering + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDithering(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_DITHEN); +} + +/** + * @brief Disable dithering. + * @note Macro IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides dithering. + * @rmtoll CR1 DITHEN LL_TIM_DisableDithering + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDithering(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_DITHEN); +} + +/** + * @brief Indicates whether dithering is activated. + * @note Macro IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides dithering. + * @rmtoll CR1 DITHEN LL_TIM_IsEnabledDithering + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDithering(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_DITHEN) == (TIM_CR1_DITHEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Indicates whether the capture/compare control bits (CCxE, CCxNE and OCxM) preload is enabled. + * @rmtoll CR2 CCPC LL_TIM_CC_IsEnabledPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_CCPC) == (TIM_CR2_CCPC)) ? 1UL : 0UL); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel\n + * CCER CC4NE LL_TIM_CC_EnableChannel\n + * CCER CC5E LL_TIM_CC_EnableChannel\n + * CCER CC6E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel\n + * CCER CC4NE LL_TIM_CC_DisableChannel\n + * CCER CC5E LL_TIM_CC_DisableChannel\n + * CCER CC6E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel\n + * CCER CC4NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC5E LL_TIM_CC_IsEnabledChannel\n + * CCER CC6E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC5S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC6S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CCER CC5P LL_TIM_OC_ConfigOutput\n + * CCER CC6P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput\n + * CR2 OIS5 LL_TIM_OC_ConfigOutput\n + * CR2 OIS6 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode\n + * CCMR3 OC5M LL_TIM_OC_SetMode\n + * CCMR3 OC6M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2 + * @arg @ref LL_TIM_OCMODE_PULSE_ON_COMPARE (for channel 3 or channel 4 only) + * @arg @ref LL_TIM_OCMODE_DIRECTION_OUTPUT (for channel 3 or channel 4 only) + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode\n + * CCMR3 OC5M LL_TIM_OC_GetMode\n + * CCMR3 OC6M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2 + * @arg @ref LL_TIM_OCMODE_PULSE_ON_COMPARE (for channel 3 or channel 4 only) + * @arg @ref LL_TIM_OCMODE_DIRECTION_OUTPUT (for channel 3 or channel 4 only) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity\n + * CCER CC4NP LL_TIM_OC_SetPolarity\n + * CCER CC5P LL_TIM_OC_SetPolarity\n + * CCER CC6P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity\n + * CCER CC4NP LL_TIM_OC_GetPolarity\n + * CCER CC5P LL_TIM_OC_GetPolarity\n + * CCER CC6P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState\n + * CR2 OIS4N LL_TIM_OC_SetIdleState\n + * CR2 OIS5 LL_TIM_OC_SetIdleState\n + * CR2 OIS6 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState\n + * CR2 OIS4N LL_TIM_OC_GetIdleState\n + * CR2 OIS5 LL_TIM_OC_GetIdleState\n + * CR2 OIS6 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH4N + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast\n + * CCMR3 OC5FE LL_TIM_OC_EnableFast\n + * CCMR3 OC6FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast\n + * CCMR3 OC5FE LL_TIM_OC_DisableFast\n + * CCMR3 OC6FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC5FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC6FE LL_TIM_OC_IsEnabledFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC5PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC6PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC5PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC6PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear\n + * CCMR3 OC5CE LL_TIM_OC_EnableClear\n + * CCMR3 OC6CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear\n + * CCMR3 OC5CE LL_TIM_OC_DisableClear\n + * CCMR3 OC6CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC5CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC6CE LL_TIM_OC_IsEnabledClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Set compare value for output channel 5 (TIMx_CCR5). + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + MODIFY_REG(TIMx->CCR5, TIM_CCR5_CCR5, CompareValue); +} + +/** + * @brief Set compare value for output channel 6 (TIMx_CCR6). + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @note If dithering is activated, CompareValue can be calculated with macro @ref __LL_TIM_CALC_DELAY_DITHER . + * @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR6, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @brief Get compare value (TIMx_CCR5) set for output channel 5. + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CCR5, TIM_CCR5_CCR5)); +} + +/** + * @brief Get compare value (TIMx_CCR6) set for output channel 6. + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR6)); +} + +/** + * @brief Select on which reference signal the OC5REF is combined to. + * @note Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the combined 3-phase PWM mode. + * @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels + * @param TIMx Timer instance + * @param GroupCH5 This parameter can be a combination of the following values: + * @arg @ref LL_TIM_GROUPCH5_NONE + * @arg @ref LL_TIM_GROUPCH5_OC1REFC + * @arg @ref LL_TIM_GROUPCH5_OC2REFC + * @arg @ref LL_TIM_GROUPCH5_OC3REFC + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t GroupCH5) +{ + MODIFY_REG(TIMx->CCR5, (TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1), GroupCH5); +} + +/** + * @brief Set the pulse on compare pulse width prescaler. + * @note Macro IS_TIM_PULSEONCOMPARE_INSTANCE(TIMx) can be used to check + * whether or not the pulse on compare feature is supported by the timer + * instance. + * @rmtoll ECR PWPRSC LL_TIM_OC_SetPulseWidthPrescaler + * @param TIMx Timer instance + * @param PulseWidthPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_PWPRSC_X1 + * @arg @ref LL_TIM_PWPRSC_X2 + * @arg @ref LL_TIM_PWPRSC_X4 + * @arg @ref LL_TIM_PWPRSC_X8 + * @arg @ref LL_TIM_PWPRSC_X16 + * @arg @ref LL_TIM_PWPRSC_X32 + * @arg @ref LL_TIM_PWPRSC_X64 + * @arg @ref LL_TIM_PWPRSC_X128 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPulseWidthPrescaler(TIM_TypeDef *TIMx, uint32_t PulseWidthPrescaler) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_PWPRSC, PulseWidthPrescaler); +} + +/** + * @brief Get the pulse on compare pulse width prescaler. + * @note Macro IS_TIM_PULSEONCOMPARE_INSTANCE(TIMx) can be used to check + * whether or not the pulse on compare feature is supported by the timer + * instance. + * @rmtoll ECR PWPRSC LL_TIM_OC_GetPulseWidthPrescaler + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_PWPRSC_X1 + * @arg @ref LL_TIM_PWPRSC_X2 + * @arg @ref LL_TIM_PWPRSC_X4 + * @arg @ref LL_TIM_PWPRSC_X8 + * @arg @ref LL_TIM_PWPRSC_X16 + * @arg @ref LL_TIM_PWPRSC_X32 + * @arg @ref LL_TIM_PWPRSC_X64 + * @arg @ref LL_TIM_PWPRSC_X128 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPulseWidthPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->ECR, TIM_ECR_PWPRSC)); +} + +/** + * @brief Set the pulse on compare pulse width duration. + * @note Macro IS_TIM_PULSEONCOMPARE_INSTANCE(TIMx) can be used to check + * whether or not the pulse on compare feature is supported by the timer + * instance. + * @rmtoll ECR PW LL_TIM_OC_SetPulseWidth + * @param TIMx Timer instance + * @param PulseWidth This parameter can be between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPulseWidth(TIM_TypeDef *TIMx, uint32_t PulseWidth) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_PW, PulseWidth << TIM_ECR_PW_Pos); +} + +/** + * @brief Get the pulse on compare pulse width duration. + * @note Macro IS_TIM_PULSEONCOMPARE_INSTANCE(TIMx) can be used to check + * whether or not the pulse on compare feature is supported by the timer + * instance. + * @rmtoll ECR PW LL_TIM_OC_GetPulseWidth + * @param TIMx Timer instance + * @retval Returned value can be between Min_Data=0 and Max_Data=255: + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPulseWidth(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->ECR, TIM_ECR_PW)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @note If dithering is activated, pay attention to the returned value interpretation. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @arg @ref LL_TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X2 + * @arg @ref LL_TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X1 + * @arg @ref LL_TIM_ENCODERMODE_DIRECTIONALCLOCK_X2 + * @arg @ref LL_TIM_ENCODERMODE_DIRECTIONALCLOCK_X1_TI12 + * @arg @ref LL_TIM_ENCODERMODE_X1_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X1_TI2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @arg @ref LL_TIM_TRGO_ENCODERCLK + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the trigger output 2 (TRGO2) used for ADC synchronization . + * @note Macro IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can be used for ADC synchronization. + * @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2 + * @param TIMx Timer Instance + * @param ADCSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO2_RESET + * @arg @ref LL_TIM_TRGO2_ENABLE + * @arg @ref LL_TIM_TRGO2_UPDATE + * @arg @ref LL_TIM_TRGO2_CC1F + * @arg @ref LL_TIM_TRGO2_OC1 + * @arg @ref LL_TIM_TRGO2_OC2 + * @arg @ref LL_TIM_TRGO2_OC3 + * @arg @ref LL_TIM_TRGO2_OC4 + * @arg @ref LL_TIM_TRGO2_OC5 + * @arg @ref LL_TIM_TRGO2_OC6 + * @arg @ref LL_TIM_TRGO2_OC4_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC6_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_FALLING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_FALLING + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS2, ADCSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER + * @arg @ref LL_TIM_SLAVEMODE_COMBINED_GATEDRESET + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_ITR4 + * @arg @ref LL_TIM_TS_ITR5 + * @arg @ref LL_TIM_TS_ITR6 + * @arg @ref LL_TIM_TS_ITR7 + * @arg @ref LL_TIM_TS_ITR8 + * @arg @ref LL_TIM_TS_ITR9 + * @arg @ref LL_TIM_TS_ITR10 + * @arg @ref LL_TIM_TS_ITR11 + * @arg @ref LL_TIM_TS_ITR12 + * @arg @ref LL_TIM_TS_ITR13 + * @arg @ref LL_TIM_TS_ITR14 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @brief Select the external trigger (ETR) input source. + * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports ETR source selection. + * @rmtoll AF1 ETRSEL LL_TIM_SetETRSource + * @param TIMx Timer instance + * @param ETRSource This parameter can be one of the following values: + * + * For TIM1, the parameter is one of the following values: + * + * @arg @ref LL_TIM_TIM1_ETRSOURCE_GPIO + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC1_AWD1 + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC1_AWD2 + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC1_AWD3 + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC2_AWD1 + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC2_AWD2 + * @arg @ref LL_TIM_TIM1_ETRSOURCE_ADC2_AWD3 + * + * For TIM2, the parameter is one of the following values: + * + * @arg @ref LL_TIM_TIM2_ETRSOURCE_GPIO + * @arg @ref LL_TIM_TIM2_ETRSOURCE_DCMIPP_HSYNC + * @arg @ref LL_TIM_TIM2_ETRSOURCE_LTDC_HSYNC + * @arg @ref LL_TIM_TIM2_ETRSOURCE_SAI1_FSA + * @arg @ref LL_TIM_TIM2_ETRSOURCE_SAI1_FSB + * @arg @ref LL_TIM_TIM2_ETRSOURCE_GFXTIM_TE + * @arg @ref LL_TIM_TIM2_ETRSOURCE_DCMIPP_VSYNC + * @arg @ref LL_TIM_TIM2_ETRSOURCE_LTDC_VSYNC + * @arg @ref LL_TIM_TIM2_ETRSOURCE_TIM3_ETR + * @arg @ref LL_TIM_TIM2_ETRSOURCE_TIM4_ETR + * @arg @ref LL_TIM_TIM2_ETRSOURCE_TIM5_ETR + * @arg @ref LL_TIM_TIM2_ETRSOURCE_ETH_PPS + * + * For TIM3, the parameter is one of the following values: + * + * @arg @ref LL_TIM_TIM3_ETRSOURCE_GPIO + * @arg @ref LL_TIM_TIM3_ETRSOURCE_DCMIPP_HSYNC + * @arg @ref LL_TIM_TIM3_ETRSOURCE_LTDC_HSYNC + * @arg @ref LL_TIM_TIM3_ETRSOURCE_GFXTIM_TE + * @arg @ref LL_TIM_TIM3_ETRSOURCE_DCMIPP_VSYNC + * @arg @ref LL_TIM_TIM3_ETRSOURCE_LTDC_VSYNC + * @arg @ref LL_TIM_TIM3_ETRSOURCE_TIM2_ETR + * @arg @ref LL_TIM_TIM3_ETRSOURCE_TIM4_ETR + * @arg @ref LL_TIM_TIM3_ETRSOURCE_TIM5_ETR + * @arg @ref LL_TIM_TIM3_ETRSOURCE_ETH_PPS + * + * For TIM4, the parameter is one of the following values: + * + * @arg @ref LL_TIM_TIM4_ETRSOURCE_GPIO + * @arg @ref LL_TIM_TIM4_ETRSOURCE_DCMIPP_HSYNC + * @arg @ref LL_TIM_TIM4_ETRSOURCE_LTDC_HSYNC + * @arg @ref LL_TIM_TIM4_ETRSOURCE_GFXTIM_TE + * @arg @ref LL_TIM_TIM4_ETRSOURCE_DCMIPP_VSYNC + * @arg @ref LL_TIM_TIM4_ETRSOURCE_LTDC_VSYNC + * @arg @ref LL_TIM_TIM4_ETRSOURCE_TIM2_ETR + * @arg @ref LL_TIM_TIM4_ETRSOURCE_TIM3_ETR + * @arg @ref LL_TIM_TIM4_ETRSOURCE_TIM5_ETR + * + * For TIM5, the parameter is one of the following values: + * + * @arg @ref LL_TIM_TIM5_ETRSOURCE_GPIO + * @arg @ref LL_TIM_TIM5_ETRSOURCE_SAI2_FSA + * @arg @ref LL_TIM_TIM5_ETRSOURCE_SAI2_FSB + * @arg @ref LL_TIM_TIM5_ETRSOURCE_DCMIPP_HSYNC + * @arg @ref LL_TIM_TIM5_ETRSOURCE_LTDC_HSYNC + * @arg @ref LL_TIM_TIM5_ETRSOURCE_GFXTIM_TE + * @arg @ref LL_TIM_TIM5_ETRSOURCE_DCMIPP_VSYNC + * @arg @ref LL_TIM_TIM5_ETRSOURCE_LTDC_VSYNC + * @arg @ref LL_TIM_TIM5_ETRSOURCE_TIM2_ETR + * @arg @ref LL_TIM_TIM5_ETRSOURCE_TIM3_ETR + * @arg @ref LL_TIM_TIM5_ETRSOURCE_TIM4_ETR + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) +{ + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); +} + +/** + * @brief Enable SMS preload. + * @note Macro IS_TIM_SMS_PRELOAD_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the preload of SMS field in SMCR register. + * @rmtoll SMCR SMSPE LL_TIM_EnableSMSPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableSMSPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_SMSPE); +} + +/** + * @brief Disable SMS preload. + * @note Macro IS_TIM_SMS_PRELOAD_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the preload of SMS field in SMCR register. + * @rmtoll SMCR SMSPE LL_TIM_DisableSMSPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableSMSPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_SMSPE); +} + +/** + * @brief Indicate whether SMS preload is enabled. + * @note Macro IS_TIM_SMS_PRELOAD_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the preload of SMS field in SMCR register. + * @rmtoll SMCR SMSPE LL_TIM_IsEnabledSMSPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledSMSPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_SMSPE) == (TIM_SMCR_SMSPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the preload source of SMS. + * @note Macro IS_TIM_SMS_PRELOAD_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the preload of SMS field in SMCR register. + * @rmtoll SMCR SMSPS LL_TIM_SetSMSPreloadSource\n + * @param TIMx Timer instance + * @param PreloadSource This parameter can be one of the following values: + * @arg @ref LL_TIM_SMSPS_TIMUPDATE + * @arg @ref LL_TIM_SMSPS_INDEX + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSMSPreloadSource(TIM_TypeDef *TIMx, uint32_t PreloadSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMSPS, PreloadSource); +} + +/** + * @brief Get the preload source of SMS. + * @note Macro IS_TIM_SMS_PRELOAD_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the preload of SMS field in SMCR register. + * @rmtoll SMCR SMSPS LL_TIM_GetSMSPreloadSource\n + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_SMSPS_TIMUPDATE + * @arg @ref LL_TIM_SMSPS_INDEX + */ +__STATIC_INLINE uint32_t LL_TIM_GetSMSPreloadSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->SMCR, TIM_SMCR_SMSPS)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BKBID bit set), the Break input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, BreakAFMode must be set to + * LL_TIM_BREAK_AFMODE_INPUT. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n + * BDTR BKF LL_TIM_ConfigBRK\n + * BDTR BKBID LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @param BreakFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N8 + * @param BreakAFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, uint32_t BreakFilter, + uint32_t BreakAFMode) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKF | TIM_BDTR_BKBID, BreakPolarity | BreakFilter | BreakAFMode); + /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disarm the break input (when it operates in bidirectional mode). + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @rmtoll BDTR BKDSRM LL_TIM_DisarmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Enable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_EnableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2E); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_DisableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2E); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break 2 input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BK2BID bit set), the Break 2 input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break 2 input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, Break2AFMode must be set to + * LL_TIM_BREAK2_AFMODE_INPUT. + * @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n + * BDTR BK2F LL_TIM_ConfigBRK2\n + * BDTR BK2BID LL_TIM_ConfigBRK2 + * @param TIMx Timer instance + * @param Break2Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_POLARITY_LOW + * @arg @ref LL_TIM_BREAK2_POLARITY_HIGH + * @param Break2Filter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N8 + * @param Break2AFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarity, uint32_t Break2Filter, + uint32_t Break2AFMode) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BK2P | TIM_BDTR_BK2F | TIM_BDTR_BK2BID, Break2Polarity | Break2Filter | Break2AFMode); + /* Note: Any write operation to BK2P bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disarm the break 2 input (when it operates in bidirectional mode). + * @note The break 2 input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output. + * @rmtoll BDTR BK2DSRM LL_TIM_DisarmBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2DSRM); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n + * AF2 BK2INE LL_TIM_EnableBreakInputSource\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + SET_BIT(*pReg, Source); +} + +/** + * @brief Disable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_DisableBreakInputSource\n + * AF2 BK2INE LL_TIM_DisableBreakInputSource\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + CLEAR_BIT(*pReg, Source); +} + +/** + * @brief Set the polarity of the break signal for the timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINP LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2INP LL_TIM_SetBreakInputSourcePolarity\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_POLARITY_LOW + * @arg @ref LL_TIM_BKIN_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, + uint32_t Polarity) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + MODIFY_REG(*pReg, (TIMx_AF1_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE)); +} +/** + * @brief Enable asymmetrical deadtime. + * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides asymmetrical deadtime. + * @rmtoll DTR2 DTAE LL_TIM_EnableAsymmetricalDeadTime + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAsymmetricalDeadTime(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DTR2, TIM_DTR2_DTAE); +} + +/** + * @brief Disable asymmetrical dead-time. + * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides asymmetrical deadtime. + * @rmtoll DTR2 DTAE LL_TIM_DisableAsymmetricalDeadTime + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAsymmetricalDeadTime(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DTR2, TIM_DTR2_DTAE); +} + +/** + * @brief Indicates whether asymmetrical deadtime is activated. + * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides asymmetrical deadtime. + * @rmtoll DTR2 DTAE LL_TIM_IsEnabledAsymmetricalDeadTime + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAsymmetricalDeadTime(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DTR2, TIM_DTR2_DTAE) == (TIM_DTR2_DTAE)) ? 1UL : 0UL); +} + +/** + * @brief Set the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and the + * rising edge of OCxN signals). + * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not + * asymmetrical dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed + * (LOCK bits in TIMx_BDTR register). + * @rmtoll DTR2 DTGF LL_TIM_SetFallingDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetFallingDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->DTR2, TIM_DTR2_DTGF, DeadTime); +} + +/** + * @brief Get the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and + * the rising edge of OCxN signals). + * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not + * asymmetrical dead-time insertion feature is supported by a timer instance. + * @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed + * (LOCK bits in TIMx_BDTR register). + * @rmtoll DTR2 DTGF LL_TIM_GetFallingDeadTime + * @param TIMx Timer instance + * @retval Returned value can be between Min_Data=0 and Max_Data=255: + */ +__STATIC_INLINE uint32_t LL_TIM_GetFallingDeadTime(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->DTR2, TIM_DTR2_DTGF)); +} + +/** + * @brief Enable deadtime preload. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides deadtime preload. + * @rmtoll DTR2 DTPE LL_TIM_EnableDeadTimePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDeadTimePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DTR2, TIM_DTR2_DTPE); +} + +/** + * @brief Disable dead-time preload. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides deadtime preload. + * @rmtoll DTR2 DTPE LL_TIM_DisableDeadTimePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDeadTimePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DTR2, TIM_DTR2_DTPE); +} + +/** + * @brief Indicates whether deadtime preload is activated. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides deadtime preload. + * @rmtoll DTR2 DTPE LL_TIM_IsEnabledDeadTimePreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDeadTimePreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DTR2, TIM_DTR2_DTPE) == (TIM_DTR2_DTPE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR5 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR6 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_DTR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_ECR + * @arg @ref LL_TIM_DMABURST_BASEADDR_TISEL + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF2 + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_19TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_20TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_21TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_22TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_23TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_24TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_25TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_26TRANSFERS + * @param DMABurstSource This parameter can be one of the following values: + * @arg @ref LL_TIM_DMA_UPDATE + * @arg @ref LL_TIM_DMA_CC1 + * @arg @ref LL_TIM_DMA_CC2 + * @arg @ref LL_TIM_DMA_CC3 + * @arg @ref LL_TIM_DMA_CC4 + * @arg @ref LL_TIM_DMA_COM + * @arg @ref LL_TIM_DMA_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength, + uint32_t DMABurstSource) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA | TIM_DCR_DBSS), + (DMABurstBaseAddress | DMABurstLength | DMABurstSource)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Encoder Encoder configuration + * @{ + */ + +/** + * @brief Enable encoder index. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IE LL_TIM_EnableEncoderIndex + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableEncoderIndex(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->ECR, TIM_ECR_IE); +} + +/** + * @brief Disable encoder index. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IE LL_TIM_DisableEncoderIndex + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableEncoderIndex(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->ECR, TIM_ECR_IE); +} + +/** + * @brief Indicate whether encoder index is enabled. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IE LL_TIM_IsEnabledEncoderIndex + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledEncoderIndex(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->ECR, TIM_ECR_IE) == (TIM_ECR_IE)) ? 1U : 0U); +} + +/** + * @brief Set index direction + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IDIR LL_TIM_SetIndexDirection + * @param TIMx Timer instance + * @param IndexDirection This parameter can be one of the following values: + * @arg @ref LL_TIM_INDEX_UP_DOWN + * @arg @ref LL_TIM_INDEX_UP + * @arg @ref LL_TIM_INDEX_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetIndexDirection(TIM_TypeDef *TIMx, uint32_t IndexDirection) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_IDIR, IndexDirection); +} + +/** + * @brief Get actual index direction + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IDIR LL_TIM_GetIndexDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_INDEX_UP_DOWN + * @arg @ref LL_TIM_INDEX_UP + * @arg @ref LL_TIM_INDEX_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetIndexDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->ECR, TIM_ECR_IDIR)); +} + +/** + * @brief Set index blanking + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IBLK LL_TIM_SetIndexblanking + * @param TIMx Timer instance + * @param Indexblanking This parameter can be one of the following values: + * @arg @ref LL_TIM_INDEX_BLANK_ALWAYS + * @arg @ref LL_TIM_INDEX_BLANK_TI3 + * @arg @ref LL_TIM_INDEX_BLANK_TI4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetIndexblanking(TIM_TypeDef *TIMx, uint32_t Indexblanking) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_IBLK, Indexblanking); +} + +/** + * @brief Get actual index blanking + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IBLK LL_TIM_GetIndexblanking + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_INDEX_BLANK_ALWAYS + * @arg @ref LL_TIM_INDEX_BLANK_TI3 + * @arg @ref LL_TIM_INDEX_BLANK_TI4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetIndexblanking(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->ECR, TIM_ECR_IBLK)); +} + + +/** + * @brief Enable first index. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR FIDX LL_TIM_EnableFirstIndex + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableFirstIndex(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->ECR, TIM_ECR_FIDX); +} + +/** + * @brief Disable first index. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR FIDX LL_TIM_DisableFirstIndex + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableFirstIndex(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->ECR, TIM_ECR_FIDX); +} + +/** + * @brief Indicates whether first index is enabled. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR FIDX LL_TIM_IsEnabledFirstIndex + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledFirstIndex(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->ECR, TIM_ECR_FIDX) == (TIM_ECR_FIDX)) ? 1UL : 0UL); +} + +/** + * @brief Set index positioning + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IPOS LL_TIM_SetIndexPositionning + * @param TIMx Timer instance + * @param IndexPositionning This parameter can be one of the following values: + * @arg @ref LL_TIM_INDEX_POSITION_DOWN_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_DOWN_UP + * @arg @ref LL_TIM_INDEX_POSITION_UP_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_UP_UP + * @arg @ref LL_TIM_INDEX_POSITION_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_UP + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetIndexPositionning(TIM_TypeDef *TIMx, uint32_t IndexPositionning) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_IPOS, IndexPositionning); +} + +/** + * @brief Get actual index positioning + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IPOS LL_TIM_GetIndexPositionning + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_INDEX_POSITION_DOWN_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_DOWN_UP + * @arg @ref LL_TIM_INDEX_POSITION_UP_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_UP_UP + * @arg @ref LL_TIM_INDEX_POSITION_DOWN + * @arg @ref LL_TIM_INDEX_POSITION_UP + */ +__STATIC_INLINE uint32_t LL_TIM_GetIndexPositionning(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->ECR, TIM_ECR_IPOS)); +} + +/** + * @brief Configure encoder index. + * @note Macro IS_TIM_INDEX_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an index input. + * @rmtoll ECR IDIR LL_TIM_ConfigIDX\n + * ECR IBLK LL_TIM_ConfigIDX\n + * ECR FIDX LL_TIM_ConfigIDX\n + * ECR IPOS LL_TIM_ConfigIDX + * @param TIMx Timer instance + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_INDEX_UP or @ref LL_TIM_INDEX_DOWN or @ref LL_TIM_INDEX_UP_DOWN + * @arg @ref LL_TIM_INDEX_BLANK_ALWAYS or @ref LL_TIM_INDEX_BLANK_TI3 or @ref LL_TIM_INDEX_BLANK_TI4 + * @arg @ref LL_TIM_INDEX_ALL or @ref LL_TIM_INDEX_FIRST_ONLY + * @arg @ref LL_TIM_INDEX_POSITION_DOWN_DOWN or ... or @ref LL_TIM_INDEX_POSITION_UP + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigIDX(TIM_TypeDef *TIMx, uint32_t Configuration) +{ + MODIFY_REG(TIMx->ECR, TIM_ECR_IDIR | TIM_ECR_IBLK | TIM_ECR_FIDX | TIM_ECR_IPOS, Configuration); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM3_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM9_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM12_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM15_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM16_TISEL TI1SEL LL_TIM_SetRemap\n + * TIM17_TISEL TI1SEL LL_TIM_SetRemap\n + * + * @param TIMx Timer instance + * @param Remap Remap param depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of TISEL registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM3: one of the following values: + * @arg @ref LL_TIM_TIM3_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM3_TI1_RMP_ETH_PPS + * + * TIM9: one of the following values: + * @arg @ref LL_TIM_TIM9_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM9_TI1_RMP_MCO1 + * @arg @ref LL_TIM_TIM9_TI1_RMP_MCO2 + * + * TIM12: one of the following values: + * @arg @ref LL_TIM_TIM12_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM12_TI1_RMP_SPDIF_FS + * @arg @ref LL_TIM_TIM12_TI1_RMP_HSI_1024 + * @arg @ref LL_TIM_TIM12_TI1_RMP_CSI_128 + * @arg @ref LL_TIM_TIM12_TI1_RMP_MCO1 + * @arg @ref LL_TIM_TIM12_TI1_RMP_MCO2 + * + * TIM15: any combination of TI1_RMP and TI2_RMP where + * + * . . TI1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM15_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM15_TI1_RMP_TIM2_CH1 + * @arg @ref LL_TIM_TIM15_TI1_RMP_TIM3_CH1 + * @arg @ref LL_TIM_TIM15_TI1_RMP_TIM4_CH1 + * @arg @ref LL_TIM_TIM15_TI1_RMP_MCO1 + * @arg @ref LL_TIM_TIM15_TI1_RMP_MCO2 + * + * . . TI2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM15_TI2_RMP_GPIO + * @arg @ref LL_TIM_TIM15_TI2_RMP_TIM2_CH2 + * @arg @ref LL_TIM_TIM15_TI2_RMP_TIM3_CH2 + * @arg @ref LL_TIM_TIM15_TI2_RMP_TIM4_CH2 + * + * TIM16: one of the following values: + * @arg @ref LL_TIM_TIM16_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM16_TI1_RMP_RTC_WKUP + * + * TIM17: one of the following values: + * @arg @ref LL_TIM_TIM17_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM17_TI1_RMP_SPDIF_FS + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->TISEL, (TIM_TISEL_TI1SEL | TIM_TISEL_TI2SEL | TIM_TISEL_TI3SEL | TIM_TISEL_TI4SEL), Remap); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 5 interrupt flag (CC5F). + * @rmtoll SR CC5IF LL_TIM_ClearFlag_CC5 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC5(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC5IF)); +} + +/** + * @brief Indicate whether Capture/Compare 5 interrupt flag (CC5F) is set (Capture/Compare 5 interrupt is pending). + * @rmtoll SR CC5IF LL_TIM_IsActiveFlag_CC5 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC5(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC5IF) == (TIM_SR_CC5IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 6 interrupt flag (CC6F). + * @rmtoll SR CC6IF LL_TIM_ClearFlag_CC6 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC6(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC6IF)); +} + +/** + * @brief Indicate whether Capture/Compare 6 interrupt flag (CC6F) is set (Capture/Compare 6 interrupt is pending). + * @rmtoll SR CC6IF LL_TIM_IsActiveFlag_CC6 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC6(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC6IF) == (TIM_SR_CC6IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break 2 interrupt flag (B2IF). + * @rmtoll SR B2IF LL_TIM_ClearFlag_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_B2IF)); +} + +/** + * @brief Indicate whether break 2 interrupt flag (B2IF) is set (break 2 interrupt is pending). + * @rmtoll SR B2IF LL_TIM_IsActiveFlag_BRK2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_B2IF) == (TIM_SR_B2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the system break interrupt flag (SBIF). + * @rmtoll SR SBIF LL_TIM_ClearFlag_SYSBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_SYSBRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_SBIF)); +} + +/** + * @brief Indicate whether system break interrupt flag (SBIF) is set (system break interrupt is pending). + * @rmtoll SR SBIF LL_TIM_IsActiveFlag_SYSBRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_SYSBRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_SBIF) == (TIM_SR_SBIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the transition error interrupt flag (TERRF). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll SR TERRF LL_TIM_ClearFlag_TERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TERR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TERRF)); +} + +/** + * @brief Indicate whether transition error interrupt flag (TERRF) is set (transition error interrupt is pending). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll SR TERRF LL_TIM_IsActiveFlag_TERR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TERR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TERRF) == (TIM_SR_TERRF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the index error interrupt flag (IERRF). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll SR IERRF LL_TIM_ClearFlag_IERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_IERR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_IERRF)); +} + +/** + * @brief Indicate whether index error interrupt flag (IERRF) is set (index error interrupt is pending). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll SR IERRF LL_TIM_IsActiveFlag_IERR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_IERR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_IERRF) == (TIM_SR_IERRF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the direction change interrupt flag (DIRF). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll SR DIRF LL_TIM_ClearFlag_DIR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_DIR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_DIRF)); +} + +/** + * @brief Indicate whether direction change interrupt flag (DIRF) is set (direction change interrupt is pending). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll SR DIRF LL_TIM_IsActiveFlag_DIR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_DIR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_DIRF) == (TIM_SR_DIRF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the index interrupt flag (IDXF). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll SR IDXF LL_TIM_ClearFlag_IDX + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_IDX(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_IDXF)); +} + +/** + * @brief Indicate whether index interrupt flag (IDXF) is set (index interrupt is pending). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll SR IDXF LL_TIM_IsActiveFlag_IDX + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_IDX(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_IDXF) == (TIM_SR_IDXF)) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable transition error interrupt (TERRIE). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER TERRIE LL_TIM_EnableIT_TERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TERR(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TERRIE); +} + +/** + * @brief Disable transition error interrupt (TERRIE). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER TERRIE LL_TIM_DisableIT_TERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TERR(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TERRIE); +} + +/** + * @brief Indicates whether the transition error interrupt (TERRIE) is enabled. + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER TERRIE LL_TIM_IsEnabledIT_TERR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TERR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TERRIE) == (TIM_DIER_TERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable index error interrupt (IERRIE). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER IERRIE LL_TIM_EnableIT_IERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_IERR(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_IERRIE); +} + +/** + * @brief Disable index error interrupt (IERRIE). + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER IERRIE LL_TIM_DisableIT_IERR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_IERR(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_IERRIE); +} + +/** + * @brief Indicates whether the index error interrupt (IERRIE) is enabled. + * @note Macro IS_TIM_ENCODER_ERROR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder error management. + * @rmtoll DIER IERRIE LL_TIM_IsEnabledIT_IERR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_IERR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_IERRIE) == (TIM_DIER_IERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable direction change interrupt (DIRIE). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER DIRIE LL_TIM_EnableIT_DIR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_DIR(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_DIRIE); +} + +/** + * @brief Disable direction change interrupt (DIRIE). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER DIRIE LL_TIM_DisableIT_DIR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_DIR(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_DIRIE); +} + +/** + * @brief Indicates whether the direction change interrupt (DIRIE) is enabled. + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER DIRIE LL_TIM_IsEnabledIT_DIR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_DIR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_DIRIE) == (TIM_DIER_DIRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable index interrupt (IDXIE). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER IDXIE LL_TIM_EnableIT_IDX + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_IDX(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_IDXIE); +} + +/** + * @brief Disable index interrupt (IDXIE). + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER IDXIE LL_TIM_DisableIT_IDX + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_IDX(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_IDXIE); +} + +/** + * @brief Indicates whether the index interrupt (IDXIE) is enabled. + * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides encoder interrupt management. + * @rmtoll DIER IDXIE LL_TIM_IsEnabledIT_IDX + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_IDX(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_IDXIE) == (TIM_DIER_IDXIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @brief Generate break 2 event. + * @rmtoll EGR B2G LL_TIM_GenerateEvent_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_B2G); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM9 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7RSxx_LL_TIM_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_ucpd.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_ucpd.h new file mode 100644 index 000000000..85f3197d5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_ucpd.h @@ -0,0 +1,1885 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_ucpd.h + * @author MCD Application Team + * @brief Header file of UCPD LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_UCPD_H +#define STM32H7RSxx_LL_UCPD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (UCPD1) + +/** @defgroup UCPD_LL UCPD + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup UCPD_LL_ES_INIT UCPD Exported Init structure + * @{ + */ + +/** + * @brief UCPD Init structures definition + */ +typedef struct +{ + uint32_t psc_ucpdclk; /*!< Specify the prescaler for the UCPD clock. + This parameter can be a value of @ref UCPD_LL_EC_PSC. + This feature can be modified afterwards using function @ref LL_UCPD_SetPSCClk(). + */ + + uint32_t transwin; /*!< Specify the number of cycles (minus 1) of the half bit clock (see HBITCLKDIV) + to achieve a legal tTransitionWindow (set according to peripheral clock to define + an interval of between 12 and 20 us). + This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F + This value can be modified afterwards using function @ref LL_UCPD_SetTransWin(). + */ + + uint32_t IfrGap; /*!< Specify the definition of the clock divider (minus 1) in order to generate + tInterframeGap from the peripheral clock. + This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F + This feature can be modified afterwards using function @ref LL_UCPD_SetIfrGap(). + */ + + uint32_t HbitClockDiv; /*!< Specify the number of cycles (minus one) at UCPD peripheral for a half bit clock + e.g. program 3 for a bit clock that takes 8 cycles of the peripheral clock : + "UCPD1_CLK". + This parameter can be a value between Min_Data=0x0 and Max_Data=0x3F. + This feature can be modified using function @ref LL_UCPD_SetHbitClockDiv(). + */ + +} LL_UCPD_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UCPD_LL_Exported_Constants UCPD Exported Constants + * @{ + */ + +/** @defgroup UCPD_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_ucpd_ReadReg function + * @{ + */ +#define LL_UCPD_SR_TXIS UCPD_SR_TXIS /*!< Transmit interrupt status */ +#define LL_UCPD_SR_TXMSGDISC UCPD_SR_TXMSGDISC /*!< Transmit message discarded interrupt */ +#define LL_UCPD_SR_TXMSGSENT UCPD_SR_TXMSGSENT /*!< Transmit message sent interrupt */ +#define LL_UCPD_SR_TXMSGABT UCPD_SR_TXMSGABT /*!< Transmit message abort interrupt */ +#define LL_UCPD_SR_HRSTDISC UCPD_SR_HRSTDISC /*!< HRST discarded interrupt */ +#define LL_UCPD_SR_HRSTSENT UCPD_SR_HRSTSENT /*!< HRST sent interrupt */ +#define LL_UCPD_SR_TXUND UCPD_SR_TXUND /*!< Tx data underrun condition interrupt */ +#define LL_UCPD_SR_RXNE UCPD_SR_RXNE /*!< Receive data register not empty interrupt */ +#define LL_UCPD_SR_RXORDDET UCPD_SR_RXORDDET /*!< Rx ordered set (4 K-codes) detected interrupt */ +#define LL_UCPD_SR_RXHRSTDET UCPD_SR_RXHRSTDET /*!< Rx Hard Reset detect interrupt */ +#define LL_UCPD_SR_RXOVR UCPD_SR_RXOVR /*!< Rx data overflow interrupt */ +#define LL_UCPD_SR_RXMSGEND UCPD_SR_RXMSGEND /*!< Rx message received */ +#define LL_UCPD_SR_RXERR UCPD_SR_RXERR /*!< Rx error */ +#define LL_UCPD_SR_TYPECEVT1 UCPD_SR_TYPECEVT1 /*!< Type C voltage level event on CC1 */ +#define LL_UCPD_SR_TYPECEVT2 UCPD_SR_TYPECEVT2 /*!< Type C voltage level event on CC2 */ +#define LL_UCPD_SR_TYPEC_VSTATE_CC1 UCPD_SR_TYPEC_VSTATE_CC1 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in UCPD register + * @param __INSTANCE__ UCPD Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_UCPD_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UCPD_LL_Exported_Functions UCPD Exported Functions + * @{ + */ + +/** @defgroup UCPD_LL_EF_Configuration Configuration + * @{ + */ + +/** @defgroup UCPD_LL_EF_CFG1 CFG1 register + * @{ + */ +/** + * @brief Enable UCPD peripheral + * @rmtoll CFG1 UCPDEN LL_UCPD_Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_Enable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN); +} + +/** + * @brief Disable UCPD peripheral + * @note When disabling the UCPD, follow the procedure described in the Reference Manual. + * @rmtoll CFG1 UCPDEN LL_UCPD_Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_Disable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN); +} + +/** + * @brief Check if UCPD peripheral is enabled + * @rmtoll CFG1 UCPDEN LL_UCPD_IsEnabled + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabled(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN) == (UCPD_CFG1_UCPDEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the receiver ordered set detection enable + * @rmtoll CFG1 RXORDSETEN LL_UCPD_SetRxOrderSet + * @param UCPDx UCPD Instance + * @param OrderSet This parameter can be combination of the following values: + * @arg @ref LL_UCPD_ORDERSET_SOP + * @arg @ref LL_UCPD_ORDERSET_SOP1 + * @arg @ref LL_UCPD_ORDERSET_SOP2 + * @arg @ref LL_UCPD_ORDERSET_HARDRST + * @arg @ref LL_UCPD_ORDERSET_CABLERST + * @arg @ref LL_UCPD_ORDERSET_SOP1_DEBUG + * @arg @ref LL_UCPD_ORDERSET_SOP2_DEBUG + * @arg @ref LL_UCPD_ORDERSET_SOP_EXT1 + * @arg @ref LL_UCPD_ORDERSET_SOP_EXT2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrderSet(UCPD_TypeDef *UCPDx, uint32_t OrderSet) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_RXORDSETEN, OrderSet); +} + +/** + * @brief Set the prescaler for ucpd clock + * @rmtoll CFG1 UCPDCLK LL_UCPD_SetPSCClk + * @param UCPDx UCPD Instance + * @param Psc This parameter can be one of the following values: + * @arg @ref LL_UCPD_PSC_DIV1 + * @arg @ref LL_UCPD_PSC_DIV2 + * @arg @ref LL_UCPD_PSC_DIV4 + * @arg @ref LL_UCPD_PSC_DIV8 + * @arg @ref LL_UCPD_PSC_DIV16 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetPSCClk(UCPD_TypeDef *UCPDx, uint32_t Psc) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_PSC_UCPDCLK, Psc); +} + +/** + * @brief Set the number of cycles (minus 1) of the half bit clock + * @rmtoll CFG1 TRANSWIN LL_UCPD_SetTransWin + * @param UCPDx UCPD Instance + * @param TransWin a value between Min_Data=0x1 and Max_Data=0x1F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetTransWin(UCPD_TypeDef *UCPDx, uint32_t TransWin) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_TRANSWIN, TransWin << UCPD_CFG1_TRANSWIN_Pos); +} + +/** + * @brief Set the clock divider value to generate an interframe gap + * @rmtoll CFG1 IFRGAP LL_UCPD_SetIfrGap + * @param UCPDx UCPD Instance + * @param IfrGap a value between Min_Data=0x1 and Max_Data=0x1F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetIfrGap(UCPD_TypeDef *UCPDx, uint32_t IfrGap) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_IFRGAP, IfrGap << UCPD_CFG1_IFRGAP_Pos); +} + +/** + * @brief Set the clock divider value to generate an interframe gap + * @rmtoll CFG1 HBITCLKDIV LL_UCPD_SetHbitClockDiv + * @param UCPDx UCPD Instance + * @param HbitClock a value between Min_Data=0x0 and Max_Data=0x3F + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetHbitClockDiv(UCPD_TypeDef *UCPDx, uint32_t HbitClock) +{ + MODIFY_REG(UCPDx->CFG1, UCPD_CFG1_HBITCLKDIV, HbitClock << UCPD_CFG1_HBITCLKDIV_Pos); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_CFG2 CFG2 register + * @{ + */ + +/** + * @brief Enable Rx Analog Filter + * @rmtoll CFG2 RXAFILTEN LL_UCPD_RxAnalogFilterEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxAnalogFilterEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_RXAFILTEN); +} + +/** + * @brief Disable Rx Analog Filter + * @rmtoll CFG2 RXAFILTEN LL_UCPD_RxAnalogFilterDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxAnalogFilterDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_RXAFILTEN); +} + +/** + * @brief Enable the wakeup mode + * @rmtoll CFG2 WUPEN LL_UCPD_WakeUpEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WakeUpEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_WUPEN); +} + +/** + * @brief Disable the wakeup mode + * @rmtoll CFG2 WUPEN LL_UCPD_WakeUpDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WakeUpDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_WUPEN); +} + +/** + * @brief Force clock enable + * @rmtoll CFG2 FORCECLK LL_UCPD_ForceClockEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ForceClockEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_FORCECLK); +} + +/** + * @brief Force clock disable + * @rmtoll CFG2 FORCECLK LL_UCPD_ForceClockDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ForceClockDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_FORCECLK); +} + +/** + * @brief RxFilter enable + * @rmtoll CFG2 RXFILTDIS LL_UCPD_RxFilterEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxFilterEnable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG2, UCPD_CFG2_RXFILTDIS); +} + +/** + * @brief RxFilter disable + * @rmtoll CFG2 RXFILTDIS LL_UCPD_RxFilterDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxFilterDisable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG2, UCPD_CFG2_RXFILTDIS); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_CR CR register + * @{ + */ +/** + * @brief Type C detector for CC2 enable + * @rmtoll CR CC2TCDIS LL_UCPD_TypeCDetectionCC2Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC2Enable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_CC2TCDIS); +} + +/** + * @brief Type C detector for CC2 disable + * @rmtoll CR CC2TCDIS LL_UCPD_TypeCDetectionCC2Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC2Disable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_CC2TCDIS); +} + +/** + * @brief Type C detector for CC1 enable + * @rmtoll CR CC1TCDIS LL_UCPD_TypeCDetectionCC1Enable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC1Enable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_CC1TCDIS); +} + +/** + * @brief Type C detector for CC1 disable + * @rmtoll CR CC1TCDIS LL_UCPD_TypeCDetectionCC1Disable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TypeCDetectionCC1Disable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_CC1TCDIS); +} + +/** + * @brief Source Vconn discharge enable + * @rmtoll CR RDCH LL_UCPD_VconnDischargeEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_VconnDischargeEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_RDCH); +} + +/** + * @brief Source Vconn discharge disable + * @rmtoll CR RDCH LL_UCPD_VconnDischargeDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_VconnDischargeDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_RDCH); +} + +/** + * @brief Signal Fast Role Swap request + * @rmtoll CR FRSTX LL_UCPD_VconnDischargeDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SignalFRSTX(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_FRSTX); +} + +/** + * @brief Fast Role swap RX detection enable + * @rmtoll CR FRSRXEN LL_UCPD_FRSDetectionEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_FRSDetectionEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_FRSRXEN); +} + +/** + * @brief Fast Role swap RX detection disable + * @rmtoll CR FRSRXEN LL_UCPD_FRSDetectionDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_FRSDetectionDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_FRSRXEN); +} + +/** + * @brief Set cc enable + * @rmtoll CR CC1VCONNEN LL_UCPD_SetccEnable + * @param UCPDx UCPD Instance + * @param CCEnable This parameter can be one of the following values: + * @arg @ref LL_UCPD_CCENABLE_NONE + * @arg @ref LL_UCPD_CCENABLE_CC1 + * @arg @ref LL_UCPD_CCENABLE_CC2 + * @arg @ref LL_UCPD_CCENABLE_CC1CC2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetccEnable(UCPD_TypeDef *UCPDx, uint32_t CCEnable) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_CCENABLE, CCEnable); +} + +/** + * @brief Set UCPD SNK role + * @rmtoll CR ANAMODE LL_UCPD_SetSNKRole + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetSNKRole(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_ANAMODE); +} + +/** + * @brief Set UCPD SRC role + * @rmtoll CR ANAMODE LL_UCPD_SetSRCRole + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetSRCRole(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_ANAMODE); +} + +/** + * @brief Get UCPD Role + * @rmtoll CR ANAMODE LL_UCPD_GetRole + * @param UCPDx UCPD Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_UCPD_ROLE_SNK + * @arg @ref LL_UCPD_ROLE_SRC + */ +__STATIC_INLINE uint32_t LL_UCPD_GetRole(UCPD_TypeDef const *const UCPDx) +{ + return (uint32_t)(READ_BIT(UCPDx->CR, UCPD_CR_ANAMODE)); +} + +/** + * @brief Set Rp resistor + * @rmtoll CR ANASUBMODE LL_UCPD_SetRpResistor + * @param UCPDx UCPD Instance + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_UCPD_RESISTOR_DEFAULT + * @arg @ref LL_UCPD_RESISTOR_1_5A + * @arg @ref LL_UCPD_RESISTOR_3_0A + * @arg @ref LL_UCPD_RESISTOR_NONE + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRpResistor(UCPD_TypeDef *UCPDx, uint32_t Resistor) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_ANASUBMODE, Resistor); +} + +/** + * @brief Set CC pin + * @rmtoll CR PHYCCSEL LL_UCPD_SetCCPin + * @param UCPDx UCPD Instance + * @param CCPin This parameter can be one of the following values: + * @arg @ref LL_UCPD_CCPIN_CC1 + * @arg @ref LL_UCPD_CCPIN_CC2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetCCPin(UCPD_TypeDef *UCPDx, uint32_t CCPin) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_PHYCCSEL, CCPin); +} + +/** + * @brief Rx enable + * @rmtoll CR PHYRXEN LL_UCPD_RxEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_PHYRXEN); +} + +/** + * @brief Rx disable + * @rmtoll CR PHYRXEN LL_UCPD_RxDisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CR, UCPD_CR_PHYRXEN); +} + +/** + * @brief Set Rx mode + * @rmtoll CR RXMODE LL_UCPD_SetRxMode + * @param UCPDx UCPD Instance + * @param RxMode This parameter can be one of the following values: + * @arg @ref LL_UCPD_RXMODE_NORMAL + * @arg @ref LL_UCPD_RXMODE_BIST_TEST_DATA + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxMode(UCPD_TypeDef *UCPDx, uint32_t RxMode) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_RXMODE, RxMode); +} + +/** + * @brief Send Hard Reset + * @rmtoll CR TXHRST LL_UCPD_SendHardReset + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SendHardReset(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_TXHRST); +} + +/** + * @brief Send message + * @rmtoll CR TXSEND LL_UCPD_SendMessage + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SendMessage(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CR, UCPD_CR_TXSEND); +} + +/** + * @brief Set Tx mode + * @rmtoll CR TXMODE LL_UCPD_SetTxMode + * @param UCPDx UCPD Instance + * @param TxMode This parameter can be one of the following values: + * @arg @ref LL_UCPD_TXMODE_NORMAL + * @arg @ref LL_UCPD_TXMODE_CABLE_RESET + * @arg @ref LL_UCPD_TXMODE_BIST_CARRIER2 + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetTxMode(UCPD_TypeDef *UCPDx, uint32_t TxMode) +{ + MODIFY_REG(UCPDx->CR, UCPD_CR_TXMODE, TxMode); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable FRS interrupt + * @rmtoll IMR FRSEVTIE LL_UCPD_EnableIT_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_FRS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE); +} + +/** + * @brief Enable type c event on CC2 + * @rmtoll IMR TYPECEVT2IE LL_UCPD_EnableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE); +} + +/** + * @brief Enable type c event on CC1 + * @rmtoll IMR TYPECEVT1IE LL_UCPD_EnableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE); +} + +/** + * @brief Enable Rx message end interrupt + * @rmtoll IMR RXMSGENDIE LL_UCPD_EnableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE); +} + +/** + * @brief Enable Rx overrun interrupt + * @rmtoll IMR RXOVRIE LL_UCPD_EnableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxOvr(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE); +} + +/** + * @brief Enable Rx hard resrt interrupt + * @rmtoll IMR RXHRSTDETIE LL_UCPD_EnableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxHRST(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE); +} + +/** + * @brief Enable Rx orderset interrupt + * @rmtoll IMR RXORDDETIE LL_UCPD_EnableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE); +} + +/** + * @brief Enable Rx non empty interrupt + * @rmtoll IMR RXNEIE LL_UCPD_EnableIT_RxNE + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_RxNE(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE); +} + +/** + * @brief Enable TX underrun interrupt + * @rmtoll IMR TXUNDIE LL_UCPD_EnableIT_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxUND(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE); +} + +/** + * @brief Enable hard reset sent interrupt + * @rmtoll IMR HRSTSENTIE LL_UCPD_EnableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE); +} + +/** + * @brief Enable hard reset discard interrupt + * @rmtoll IMR HRSTDISCIE LL_UCPD_EnableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE); +} + +/** + * @brief Enable Tx message abort interrupt + * @rmtoll IMR TXMSGABTIE LL_UCPD_EnableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE); +} + +/** + * @brief Enable Tx message sent interrupt + * @rmtoll IMR TXMSGSENTIE LL_UCPD_EnableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE); +} + +/** + * @brief Enable Tx message discarded interrupt + * @rmtoll IMR TXMSGDISCIE LL_UCPD_EnableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE); +} + +/** + * @brief Enable Tx data receive interrupt + * @rmtoll IMR TXISIE LL_UCPD_EnableIT_TxIS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_EnableIT_TxIS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->IMR, UCPD_IMR_TXISIE); +} + +/** + * @brief Disable FRS interrupt + * @rmtoll IMR FRSEVTIE LL_UCPD_DisableIT_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_FRS(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE); +} + +/** + * @brief Disable type c event on CC2 + * @rmtoll IMR TYPECEVT2IE LL_UCPD_DisableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE); +} + +/** + * @brief Disable type c event on CC1 + * @rmtoll IMR TYPECEVT1IE LL_UCPD_DisableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE); +} + +/** + * @brief Disable Rx message end interrupt + * @rmtoll IMR RXMSGENDIE LL_UCPD_DisableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE); +} + +/** + * @brief Disable Rx overrun interrupt + * @rmtoll IMR RXOVRIE LL_UCPD_DisableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxOvr(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE); +} + +/** + * @brief Disable Rx hard resrt interrupt + * @rmtoll IMR RXHRSTDETIE LL_UCPD_DisableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxHRST(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE); +} + +/** + * @brief Disable Rx orderset interrupt + * @rmtoll IMR RXORDDETIE LL_UCPD_DisableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE); +} + +/** + * @brief Disable Rx non empty interrupt + * @rmtoll IMR RXNEIE LL_UCPD_DisableIT_RxNE + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_RxNE(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE); +} + +/** + * @brief Disable TX underrun interrupt + * @rmtoll IMR TXUNDIE LL_UCPD_DisableIT_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxUND(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE); +} + +/** + * @brief Disable hard reset sent interrupt + * @rmtoll IMR HRSTSENTIE LL_UCPD_DisableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE); +} + +/** + * @brief Disable hard reset discard interrupt + * @rmtoll IMR HRSTDISCIE LL_UCPD_DisableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE); +} + +/** + * @brief Disable Tx message abort interrupt + * @rmtoll IMR TXMSGABTIE LL_UCPD_DisableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE); +} + +/** + * @brief Disable Tx message sent interrupt + * @rmtoll IMR TXMSGSENTIE LL_UCPD_DisableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE); +} + +/** + * @brief Disable Tx message discarded interrupt + * @rmtoll IMR TXMSGDISCIE LL_UCPD_DisableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE); +} + +/** + * @brief Disable Tx data receive interrupt + * @rmtoll IMR TXISIE LL_UCPD_DisableIT_TxIS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_DisableIT_TxIS(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->IMR, UCPD_IMR_TXISIE); +} + +/** + * @brief Check if FRS interrupt enabled + * @rmtoll IMR FRSEVTIE LL_UCPD_DisableIT_FRS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_FRS(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE) == UCPD_IMR_FRSEVTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC2 enabled + * @rmtoll IMR TYPECEVT2IE LL_UCPD_DisableIT_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC2(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE) == UCPD_IMR_TYPECEVT2IE) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC1 enabled + * @rmtoll IMR2 TYPECEVT1IE LL_UCPD_IsEnableIT_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC1(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE) == UCPD_IMR_TYPECEVT1IE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx message end interrupt enabled + * @rmtoll IMR RXMSGENDIE LL_UCPD_IsEnableIT_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxMsgEnd(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE) == UCPD_IMR_RXMSGENDIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx overrun interrupt enabled + * @rmtoll IMR RXOVRIE LL_UCPD_IsEnableIT_RxOvr + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOvr(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE) == UCPD_IMR_RXOVRIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx hard resrt interrupt enabled + * @rmtoll IMR RXHRSTDETIE LL_UCPD_IsEnableIT_RxHRST + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxHRST(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE) == UCPD_IMR_RXHRSTDETIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx orderset interrupt enabled + * @rmtoll IMR RXORDDETIE LL_UCPD_IsEnableIT_RxOrderSet + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOrderSet(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE) == UCPD_IMR_RXORDDETIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx non empty interrupt enabled + * @rmtoll IMR RXNEIE LL_UCPD_IsEnableIT_RxNE + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxNE(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE) == UCPD_IMR_RXNEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if TX underrun interrupt enabled + * @rmtoll IMR TXUNDIE LL_UCPD_IsEnableIT_TxUND + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxUND(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE) == UCPD_IMR_TXUNDIE) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset sent interrupt enabled + * @rmtoll IMR HRSTSENTIE LL_UCPD_IsEnableIT_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTSENT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE) == UCPD_IMR_HRSTSENTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset discard interrupt enabled + * @rmtoll IMR HRSTDISCIE LL_UCPD_IsEnableIT_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTDISC(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE) == UCPD_IMR_HRSTDISCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message abort interrupt enabled + * @rmtoll IMR TXMSGABTIE LL_UCPD_IsEnableIT_TxMSGABT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGABT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE) == UCPD_IMR_TXMSGABTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message sent interrupt enabled + * @rmtoll IMR TXMSGSENTIE LL_UCPD_IsEnableIT_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGSENT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE) == UCPD_IMR_TXMSGSENTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message discarded interrupt enabled + * @rmtoll IMR TXMSGDISCIE LL_UCPD_IsEnableIT_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGDISC(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE) == UCPD_IMR_TXMSGDISCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx data receive interrupt enabled + * @rmtoll IMR TXISIE LL_UCPD_IsEnableIT_TxIS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxIS(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXISIE) == UCPD_IMR_TXISIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_IT_Clear Interrupt Clear + * @{ + */ + +/** + * @brief Clear FRS interrupt + * @rmtoll ICR FRSEVTIE LL_UCPD_ClearFlag_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_FRS(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_FRSEVTCF); +} + +/** + * @brief Clear type c event on CC2 + * @rmtoll IIMR TYPECEVT2IE LL_UCPD_ClearFlag_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TypeCEventCC2(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TYPECEVT2CF); +} + +/** + * @brief Clear type c event on CC1 + * @rmtoll IIMR TYPECEVT1IE LL_UCPD_ClearFlag_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TypeCEventCC1(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TYPECEVT1CF); +} + +/** + * @brief Clear Rx message end interrupt + * @rmtoll ICR RXMSGENDIE LL_UCPD_ClearFlag_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxMsgEnd(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXMSGENDCF); +} + +/** + * @brief Clear Rx overrun interrupt + * @rmtoll ICR RXOVRIE LL_UCPD_ClearFlag_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxOvr(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXOVRCF); +} + +/** + * @brief Clear Rx hard resrt interrupt + * @rmtoll ICR RXHRSTDETIE LL_UCPD_ClearFlag_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxHRST(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXHRSTDETCF); +} + +/** + * @brief Clear Rx orderset interrupt + * @rmtoll ICR RXORDDETIE LL_UCPD_ClearFlag_RxOrderSet + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_RxOrderSet(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_RXORDDETCF); +} + +/** + * @brief Clear TX underrun interrupt + * @rmtoll ICR TXUNDIE LL_UCPD_ClearFlag_TxUND + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxUND(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXUNDCF); +} + +/** + * @brief Clear hard reset sent interrupt + * @rmtoll ICR HRSTSENTIE LL_UCPD_ClearFlag_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxHRSTSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_HRSTSENTCF); +} + +/** + * @brief Clear hard reset discard interrupt + * @rmtoll ICR HRSTDISCIE LL_UCPD_ClearFlag_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxHRSTDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_HRSTDISCCF); +} + +/** + * @brief Clear Tx message abort interrupt + * @rmtoll ICR TXMSGABTIE LL_UCPD_ClearFlag_TxMSGABT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGABT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGABTCF); +} + +/** + * @brief Clear Tx message sent interrupt + * @rmtoll ICR TXMSGSENTIE LL_UCPD_ClearFlag_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGSENT(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGSENTCF); +} + +/** + * @brief Clear Tx message discarded interrupt + * @rmtoll ICR TXMSGDISCIE LL_UCPD_ClearFlag_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGDISC(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->ICR, UCPD_ICR_TXMSGDISCCF); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if FRS interrupt + * @rmtoll SR FRSEVT LL_UCPD_IsActiveFlag_FRS + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_FRS(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_FRSEVT) == UCPD_SR_FRSEVT) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC2 + * @rmtoll SR TYPECEVT2 LL_UCPD_IsActiveFlag_TypeCEventCC2 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC2(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT2) == UCPD_SR_TYPECEVT2) ? 1UL : 0UL); +} + +/** + * @brief Check if type c event on CC1 + * @rmtoll SR TYPECEVT1 LL_UCPD_IsActiveFlag_TypeCEventCC1 + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC1(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT1) == UCPD_SR_TYPECEVT1) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx message end interrupt + * @rmtoll SR RXMSGEND LL_UCPD_IsActiveFlag_RxMsgEnd + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxMsgEnd(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXMSGEND) == UCPD_SR_RXMSGEND) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx overrun interrupt + * @rmtoll SR RXOVR LL_UCPD_IsActiveFlag_RxOvr + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOvr(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXOVR) == UCPD_SR_RXOVR) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx hard resrt interrupt + * @rmtoll SR RXHRSTDET LL_UCPD_IsActiveFlag_RxHRST + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxHRST(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXHRSTDET) == UCPD_SR_RXHRSTDET) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx orderset interrupt + * @rmtoll SR RXORDDET LL_UCPD_IsActiveFlag_RxOrderSet + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOrderSet(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXORDDET) == UCPD_SR_RXORDDET) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx non empty interrupt + * @rmtoll SR RXNE LL_UCPD_IsActiveFlag_RxNE + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxNE(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_RXNE) == UCPD_SR_RXNE) ? 1UL : 0UL); +} + +/** + * @brief Check if TX underrun interrupt + * @rmtoll SR TXUND LL_UCPD_IsActiveFlag_TxUND + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxUND(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXUND) == UCPD_SR_TXUND) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset sent interrupt + * @rmtoll SR HRSTSENT LL_UCPD_IsActiveFlag_TxHRSTSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTSENT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTSENT) == UCPD_SR_HRSTSENT) ? 1UL : 0UL); +} + +/** + * @brief Check if hard reset discard interrupt + * @rmtoll SR HRSTDISC LL_UCPD_IsActiveFlag_TxHRSTDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTDISC(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTDISC) == UCPD_SR_HRSTDISC) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message abort interrupt + * @rmtoll SR TXMSGABT LL_UCPD_IsActiveFlag_TxMSGABT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGABT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGABT) == UCPD_SR_TXMSGABT) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message sent interrupt + * @rmtoll SR TXMSGSENT LL_UCPD_IsActiveFlag_TxMSGSENT + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGSENT(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGSENT) == UCPD_SR_TXMSGSENT) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx message discarded interrupt + * @rmtoll SR TXMSGDISC LL_UCPD_IsActiveFlag_TxMSGDISC + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGDISC(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGDISC) == UCPD_SR_TXMSGDISC) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx data receive interrupt + * @rmtoll SR TXIS LL_UCPD_IsActiveFlag_TxIS + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxIS(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->SR, UCPD_SR_TXIS) == UCPD_SR_TXIS) ? 1UL : 0UL); +} + +/** + * @brief return the vstate value for CC2 + * @rmtoll SR TXIS LL_UCPD_GetTypeCVstateCC2 + * @param UCPDx UCPD Instance + * @retval val + */ +__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC2(UCPD_TypeDef const *const UCPDx) +{ + return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC2; +} + +/** + * @brief return the vstate value for CC1 + * @rmtoll SR TXIS LL_UCPD_GetTypeCVstateCC1 + * @param UCPDx UCPD Instance + * @retval val + */ +__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC1(UCPD_TypeDef const *const UCPDx) +{ + return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC1; +} + +/** + * @} + */ + + +/** @defgroup UCPD_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Rx DMA Enable + * @rmtoll CFG1 RXDMAEN LL_UCPD_RxDMAEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDMAEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN); +} + +/** + * @brief Rx DMA Disable + * @rmtoll CFG1 RXDMAEN LL_UCPD_RxDMADisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_RxDMADisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN); +} + +/** + * @brief Tx DMA Enable + * @rmtoll CFG1 TXDMAEN LL_UCPD_TxDMAEnable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TxDMAEnable(UCPD_TypeDef *UCPDx) +{ + SET_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN); +} + +/** + * @brief Tx DMA Disable + * @rmtoll CFG1 TXDMAEN LL_UCPD_TxDMADisable + * @param UCPDx UCPD Instance + * @retval None + */ +__STATIC_INLINE void LL_UCPD_TxDMADisable(UCPD_TypeDef *UCPDx) +{ + CLEAR_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_UCPD_IsEnabledTxDMA + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabledTxDMA(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN) == (UCPD_CFG1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_UCPD_IsEnabledRxDMA + * @param UCPDx UCPD Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_UCPD_IsEnabledRxDMA(UCPD_TypeDef const *const UCPDx) +{ + return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN) == (UCPD_CFG1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup UCPD_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief write the orderset for Tx message + * @rmtoll TX_ORDSET TXORDSET LL_UCPD_WriteTxOrderSet + * @param UCPDx UCPD Instance + * @param TxOrderSet one of the following value + * @arg @ref LL_UCPD_ORDERED_SET_SOP + * @arg @ref LL_UCPD_ORDERED_SET_SOP1 + * @arg @ref LL_UCPD_ORDERED_SET_SOP2 + * @arg @ref LL_UCPD_ORDERED_SET_HARD_RESET + * @arg @ref LL_UCPD_ORDERED_SET_CABLE_RESET + * @arg @ref LL_UCPD_ORDERED_SET_SOP1_DEBUG + * @arg @ref LL_UCPD_ORDERED_SET_SOP2_DEBUG + * @retval None + */ +__STATIC_INLINE void LL_UCPD_WriteTxOrderSet(UCPD_TypeDef *UCPDx, uint32_t TxOrderSet) +{ + WRITE_REG(UCPDx->TX_ORDSET, TxOrderSet); +} + +/** + * @brief write the Tx paysize + * @rmtoll TX_PAYSZ TXPAYSZ LL_UCPD_WriteTxPaySize + * @param UCPDx UCPD Instance + * @param TxPaySize + * @retval None. + */ +__STATIC_INLINE void LL_UCPD_WriteTxPaySize(UCPD_TypeDef *UCPDx, uint32_t TxPaySize) +{ + WRITE_REG(UCPDx->TX_PAYSZ, TxPaySize); +} + +/** + * @brief Write data + * @rmtoll TXDR DR LL_UCPD_WriteData + * @param UCPDx UCPD Instance + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None. + */ +__STATIC_INLINE void LL_UCPD_WriteData(UCPD_TypeDef *UCPDx, uint8_t Data) +{ + WRITE_REG(UCPDx->TXDR, Data); +} + +/** + * @brief read RX the orderset + * @rmtoll RX_ORDSET RXORDSET LL_UCPD_ReadRxOrderSet + * @param UCPDx UCPD Instance + * @retval RxOrderSet one of the following value + * @arg @ref LL_UCPD_RXORDSET_SOP + * @arg @ref LL_UCPD_RXORDSET_SOP1 + * @arg @ref LL_UCPD_RXORDSET_SOP2 + * @arg @ref LL_UCPD_RXORDSET_SOP1_DEBUG + * @arg @ref LL_UCPD_RXORDSET_SOP2_DEBUG + * @arg @ref LL_UCPD_RXORDSET_CABLE_RESET + * @arg @ref LL_UCPD_RXORDSET_SOPEXT1 + * @arg @ref LL_UCPD_RXORDSET_SOPEXT2 + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadRxOrderSet(UCPD_TypeDef const *const UCPDx) +{ + return READ_BIT(UCPDx->RX_ORDSET, UCPD_RX_ORDSET_RXORDSET); +} + +/** + * @brief Read the Rx paysize + * @rmtoll RX_PAYSZ RXPAYSZ LL_UCPD_ReadRxPaySize + * @param UCPDx UCPD Instance + * @retval RXPaysize. + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadRxPaySize(UCPD_TypeDef const *const UCPDx) +{ + return READ_BIT(UCPDx->RX_PAYSZ, UCPD_RX_PAYSZ_RXPAYSZ); +} + +/** + * @brief Read data + * @rmtoll RXDR RXDATA LL_UCPD_ReadData + * @param UCPDx UCPD Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_UCPD_ReadData(UCPD_TypeDef const *const UCPDx) +{ + return READ_REG(UCPDx->RXDR); +} + +/** + * @brief Set Rx OrderSet Ext1 + * @rmtoll RX_ORDEXT1 RXSOPX1 LL_UCPD_SetRxOrdExt1 + * @param UCPDx UCPD Instance + * @param SOPExt Value between Min_Data=0x00000 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrdExt1(UCPD_TypeDef *UCPDx, uint32_t SOPExt) +{ + WRITE_REG(UCPDx->RX_ORDEXT1, SOPExt); +} + +/** + * @brief Set Rx OrderSet Ext2 + * @rmtoll RX_ORDEXT2 RXSOPX2 LL_UCPD_SetRxOrdExt2 + * @param UCPDx UCPD Instance + * @param SOPExt Value between Min_Data=0x00000 and Max_Data=0xFFFFF + * @retval None + */ +__STATIC_INLINE void LL_UCPD_SetRxOrdExt2(UCPD_TypeDef *UCPDx, uint32_t SOPExt) +{ + WRITE_REG(UCPDx->RX_ORDEXT2, SOPExt); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup UCPD_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx); +ErrorStatus LL_UCPD_Init(UCPD_TypeDef *UCPDx, const LL_UCPD_InitTypeDef *UCPD_InitStruct); +void LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +#endif /* defined (UCPD1) */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_UCPD_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usart.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usart.h new file mode 100644 index 000000000..8f532e43a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usart.h @@ -0,0 +1,4400 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_USART_H +#define STM32H7RSxx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5) \ + || defined(UART7) || defined(UART8) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 || UART7 || UART8 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_USART_H */ + diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usb.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usb.h new file mode 100644 index 000000000..7dce86d4a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_usb.h @@ -0,0 +1,578 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_USB_H +#define STM32H7RSxx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#ifndef HAL_USB_TIMEOUT +#define HAL_USB_TIMEOUT 0xF000000U +#endif /* define HAL_USB_TIMEOUT */ + +#ifndef HAL_USB_CURRENT_MODE_MAX_DELAY_MS +#define HAL_USB_CURRENT_MODE_MAX_DELAY_MS 200U +#endif /* define HAL_USB_CURRENT_MODE_MAX_DELAY_MS */ + +/** + * @brief USB Mode definition + */ + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +} USB_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_ACK, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_HCStateTypeDef; + + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint8_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t dma_enable; /*!< USB DMA state. + If DMA is not supported this parameter shall be set by default to zero */ + + uint8_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Speed/HCD_Speed + (HCD_SPEED_xxx, HCD_SPEED_xxx) */ + + uint8_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint8_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ + + uint8_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint8_t low_power_enable; /*!< Enable or disable the low Power Mode. */ + + uint8_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint8_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint8_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint8_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ + + uint8_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ + +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_iso_incomplete; /*!< Endpoint isoc condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_size; /*!< requested transfer size */ +} USB_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host Channel speed. + This parameter can be any value of @ref HCD_Device_Speed: + (HCD_DEVICE_SPEED_xxx) */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + uint8_t do_ssplit; /*!< Enable start split transaction in HS mode. */ + uint8_t do_csplit; /*!< Enable complete split transaction in HS mode. */ + uint8_t ep_ss_schedule; /*!< Enable periodic endpoint start split schedule . */ + uint32_t iso_splt_xactPos; /*!< iso split transfer transaction position. */ + + uint8_t hub_port_nbr; /*!< USB HUB port number */ + uint8_t hub_addr; /*!< USB HUB address */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t XferSize; /*!< OTG Channel transfer size. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + uint32_t NyetErrCnt; /*!< Complete Split NYET Host channel error count. */ + + USB_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_URBStateTypeDef */ + + USB_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_HCStateTypeDef */ +} USB_HCTypeDef; + +typedef USB_ModeTypeDef USB_OTG_ModeTypeDef; +typedef USB_CfgTypeDef USB_OTG_CfgTypeDef; +typedef USB_EPTypeDef USB_OTG_EPTypeDef; +typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef; +typedef USB_HCStateTypeDef USB_OTG_HCStateTypeDef; +typedef USB_HCTypeDef USB_OTG_HCTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_OTG_CORE VERSION ID + * @{ + */ +#define USB_OTG_CORE_ID_300A 0x4F54300AU +#define USB_OTG_CORE_ID_310A 0x4F54310AU +/** + * @} + */ + +/** @defgroup USB_Core_Mode_ USB Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_HIGH 0U +#define USB_OTG_SPEED_HIGH_IN_FULL 1U +#define USB_OTG_SPEED_FULL 3U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_EMBEDDED_PHY 2U +#define USB_OTG_HS_EMBEDDED_PHY 3U +/** + * @} + */ + +/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_HS_TRDT_VALUE +#define USBD_HS_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +#ifndef USBD_FS_TRDT_VALUE +#define USBD_FS_TRDT_VALUE 5U +#define USBD_DEFAULT_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_HS_MAX_PACKET_SIZE 512U +#define USB_OTG_FS_MAX_PACKET_SIZE 64U +#define USB_OTG_MAX_EP0_SIZE 64U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0U +#define DCFG_FRAME_INTERVAL_85 1U +#define DCFG_FRAME_INTERVAL_90 2U +#define DCFG_FRAME_INTERVAL_95 3U +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type + * @{ + */ +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_HS_SPEED 0U +#define USBD_HSINFS_SPEED 1U +#define USBH_HS_SPEED 0U +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0U +#define HCFG_48_MHZ 1U +#define HCFG_6_MHZ 2U +/** + * @} + */ + +/** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines + * @{ + */ +#define HFIR_6_MHZ 6000U +#define HFIR_60_MHZ 60000U +#define HFIR_48_MHZ 48000U +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0U +#define HPRT0_PRTSPD_FULL_SPEED 1U +#define HPRT0_PRTSPD_LOW_SPEED 2U +/** + * @} + */ + +#define HCCHAR_CTRL 0U +#define HCCHAR_ISOC 1U +#define HCCHAR_BULK 2U +#define HCCHAR_INTR 3U + +#define GRXSTS_PKTSTS_IN 2U +#define GRXSTS_PKTSTS_IN_XFER_COMP 3U +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U +#define GRXSTS_PKTSTS_CH_HALTED 7U + +#define CLEAR_INTERRUPT_MASK 0xFFFFFFFFU + +#define HC_MAX_PKT_CNT 256U +#define ISO_SPLT_MPS 188U + +#define HCSPLT_BEGIN 1U +#define HCSPLT_MIDDLE 2U +#define HCSPLT_END 3U +#define HCSPLT_FULL 4U + +#define TEST_J 1U +#define TEST_K 2U +#define TEST_SE0_NAK 3U +#define TEST_PACKET 4U +#define TEST_FORCE_EN 5U + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ + + USB_OTG_HOST_CHANNEL_BASE\ + + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) + + +#define EP_ADDR_MSK 0xFU +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(const USB_OTG_GlobalTypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_WritePacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma); + +void *USB_ReadPacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStopXfer(const USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(const USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(const USB_OTG_GlobalTypeDef *USBx, uint8_t dma, const uint8_t *psetup); +uint8_t USB_GetDevSpeed(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx); +uint32_t USB_ReadChInterrupts(const USB_OTG_GlobalTypeDef *USBx, uint8_t chnum); +uint32_t USB_ReadDevAllOutEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(const USB_OTG_GlobalTypeDef *USBx, uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus(const USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx); +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, + USB_OTG_HCTypeDef *hc, uint8_t dma); + +uint32_t USB_HC_ReadInterrupt(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(const USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(const USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7RSxx_LL_USB_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_utils.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_utils.h new file mode 100644 index 000000000..ff16ecc9c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_utils.h @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_UTILS_H +#define STM32H7RSxx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" +#include "stm32h7rsxx_ll_system.h" +#include "stm32h7rsxx_ll_bus.h" +#include "stm32h7rsxx_ll_rcc.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 0 and Max_Data = 63 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetM(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetN(). */ + + uint32_t PLLP; /*!< Division for the main system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetP(). */ + + uint32_t FRACN; /*!< Fractional part of the multiplication factor for PLL VCO. + This parameter can be a value between 0 and 8191 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetFRACN(). */ + + uint32_t VCO_Input; /*!< PLL clock Input range. + This parameter can be a value of @ref RCC_LL_EC_PLLINPUTRANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOInputRange(). */ + + uint32_t VCO_Output; /*!< PLL clock Output range. + This parameter can be a value of @ref RCC_LL_EC_PLLVCORANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOOutputRange(). */ + +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t SYSCLKDivider; /*!< The System clock (SYSCLK) divider. This clock is derived from the PLL output. + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetSysPrescaler(). */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_AHB_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + + uint32_t APB4CLKDivider; /*!< The APB4 clock (PCLK4) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB4_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB4Prescaler(). */ + + uint32_t APB5CLKDivider; /*!< The APB5 clock (PCLK5) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB5_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB5Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#define LL_UTILS_PACKAGETYPE_VFQFPN68_GP 0U /*!< VFQFPN68 GP package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_SMPS_GP 1U /*!< TFBGA100 SMPS GP package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_GP 2U /*!< LQFP100 GP package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_GP 3U /*!< LQFP144 GP package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA144_SMPS_GP 4U /*!< UFBGA144 SMPS GP package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA144_SMPS_GFX 5U /*!< UFBGA144 SMPS GFX package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_SMPS_GFX 6U /*!< UFBGA169 SMPS GFX package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_SMPS_GP 7U /*!< UFBGA169 SMPS GP package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_25_SMPS_GP 8U /*!< UFBGA176+25 SMPS GP package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_SMPS_GP 9U /*!< LQFP176 SMPS GP package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_SMPS_GFX 10U /*!< LQFP176 SMPS GFX package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_25_SMPS_GFX 11U /*!< UFBGA176+25 SMPS GFX package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA225_OCTO 12U /*!< TFBGA225 OCTO package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA225_HEXA 13U /*!< TFBGA225 HEXA package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP_SMPS_GP 14U /*!< WLCSP SMPS GP package type */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval UID[31:0] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((__IO uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval UID[63:32] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((__IO uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval UID[95:64] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((__IO uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)((READ_REG(*((__IO uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF0000UL) >> 16UL); +} + +/** + * @brief Get Package type + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_VFQFPN68_GP + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_SMPS_GP + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_GP + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_GP + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144_SMPS_GP + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144_SMPS_GFX + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_SMPS_GFX + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_SMPS_GP + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_25_SMPS_GP + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_SMPS_GP + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_SMPS_GFX + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_25_SMPS_GFX + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA225_OCTO + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA225_HEXA + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP_SMPS_GP + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((__IO uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0FUL); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + if (Ticks > 0U) + { + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ + } +} + +void LL_Init1msTick(uint32_t CPU_Frequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t CPU_Frequency); +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_CSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, + uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_UTILS_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_wwdg.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_wwdg.h new file mode 100644 index 000000000..026e29f47 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_ll_wwdg.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_LL_WWDG_H +#define STM32H7RSxx_LL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (WWDG) + +/** @defgroup WWDG_LL WWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions + * @{ + */ +#define LL_WWDG_CFR_EWI WWDG_CFR_EWI +/** + * @} + */ + +/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER + * @{ + */ +#define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define LL_WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define LL_WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define LL_WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define LL_WWDG_PRESCALER_128 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros + * @{ + */ +/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable Window Watchdog. The watchdog is always disabled after a reset. + * @note It is enabled by setting the WDGA bit in the WWDG_CR register, + * then it cannot be disabled again except by a reset. + * This bit is set by software and only cleared by hardware after a reset. + * When WDGA = 1, the watchdog can generate a reset. + * @rmtoll CR WDGA LL_WWDG_Enable + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CR, WWDG_CR_WDGA); +} + +/** + * @brief Checks if Window Watchdog is enabled + * @rmtoll CR WDGA LL_WWDG_IsEnabled + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(const WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL); +} + +/** + * @brief Set the Watchdog counter value to provided value (7-bits T[6:0]) + * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset + * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles + * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared) + * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled) + * @rmtoll CR T LL_WWDG_SetCounter + * @param WWDGx WWDG Instance + * @param Counter 0..0x7F (7 bit counter value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter) +{ + MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter); +} + +/** + * @brief Return current Watchdog Counter Value (7 bits counter value) + * @rmtoll CR T LL_WWDG_GetCounter + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Counter value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetCounter(const WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CR, WWDG_CR_T)); +} + +/** + * @brief Set the time base of the prescaler (WDGTB). + * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter + * is decremented every (4096 x 2expWDGTB) PCLK cycles + * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler + * @param WWDGx WWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler); +} + +/** + * @brief Return current Watchdog Prescaler Value + * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler + * @param WWDGx WWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + */ +__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(const WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB)); +} + +/** + * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]). + * @note This window value defines when write in the WWDG_CR register + * to program Watchdog counter is allowed. + * Watchdog counter value update must occur only when the counter value + * is lower than the Watchdog window register value. + * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value + * (in the control register) is refreshed before the downcounter has reached + * the watchdog window register value. + * Physically is possible to set the Window lower then 0x40 but it is not recommended. + * To generate an immediate reset, it is possible to set the Counter lower than 0x40. + * @rmtoll CFR W LL_WWDG_SetWindow + * @param WWDGx WWDG Instance + * @param Window 0x00..0x7F (7 bit Window value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window); +} + +/** + * @brief Return current Watchdog Window Value (7 bits value) + * @rmtoll CFR W LL_WWDG_GetWindow + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Window value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetWindow(const WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_W)); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ +/** + * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not. + * @note This bit is set by hardware when the counter has reached the value 0x40. + * It must be cleared by software by writing 0. + * A write of 1 has no effect. This bit is also set if the interrupt is not enabled. + * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(const WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF) + * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable the Early Wakeup Interrupt. + * @note When set, an interrupt occurs whenever the counter reaches value 0x40. + * This interrupt is only cleared by hardware after a reset + * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CFR, WWDG_CFR_EWI); +} + +/** + * @brief Check if Early Wakeup Interrupt is enabled + * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(const WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* WWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_LL_WWDG_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_util_i3c.h b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_util_i3c.h new file mode 100644 index 000000000..db17ce21b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/include/stm32h7rsxx_util_i3c.h @@ -0,0 +1,135 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_util_i3c.h + * @author MCD Application Team + * @brief Header of stm32h7rsxx_util_i3c.c + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/ +#ifndef STM32H7RSxx_UTIL_I3C_H +#define STM32H7RSxx_UTIL_I3C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#if defined (USE_HAL_DRIVER) +#include "stm32h7rsxx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#if defined (USE_FULL_LL_DRIVER) +#include "stm32h7rsxx_ll_i3c.h" +#endif /* USE_FULL_LL_DRIVER */ + +/** @addtogroup STM32H7RSxx_UTIL_Driver + * @{ + */ + +/** @defgroup UTILITY_I3C I3C Utility + * @{ + */ +/* Exported types ----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_UTIL_Exported_Types I3C Utility Exported Types + * @{ + */ + +/** @defgroup I3C_Controller_Timing_Structure_definition I3C Controller Timing Structure definition + * @brief I3C Controller Timing Structure definition + * @{ + */ +typedef struct +{ + uint32_t clockSrcFreq; /*!< Specifies the I3C clock source (in Hz). */ + + uint32_t i3cPPFreq; /*!< Specifies the I3C required bus clock for Push-Pull phase (in Hz). */ + + uint32_t i2cODFreq; /*!< Specifies I2C required bus clock for Open-Drain phase (in Hz). */ + + uint32_t dutyCycle; /*!< Specifies the I3C duty cycle for Pure I3C bus or I2C duty cycle for Mixed bus in percent + This parameter must be a value less than or equal to 50 percent. */ + + uint32_t busType; /*!< Specifies the Bus configuration type. + This parameter must be a value of @ref I3C_UTIL_EC_BUS_TYPE */ +} I3C_CtrlTimingTypeDef; +/** + * @} + */ + +/** @defgroup I3C_Target_Timing_Structure_definition I3C Target Timing Structure definition + * @brief I3C Target Timing Structure definition + * @{ + */ +typedef struct +{ + uint32_t clockSrcFreq; /*!< Specifies the I3C clock source (in Hz). */ +} I3C_TgtTimingTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported define ---------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_UTIL_Exported_Define I3C Utility Exported Define + * @{ + */ + +/** @defgroup I3C_UTIL_EC_BUS_TYPE I3C Utility Bus Type + * @brief Bus type defines which can be used with I3C_CtrlTimingComputation function + * @{ + */ +#define I3C_PURE_I3C_BUS 0U /*!< Pure I3C bus, no I2C */ +#define I3C_MIXED_BUS 1U /*!< Mixed bus I3C and I2C */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @addtogroup I3C_UTIL_Exported_Functions + * @{ + */ +/** @addtogroup I3C_UTIL_EF_Computation + * @{ + */ +ErrorStatus I3C_CtrlTimingComputation(const I3C_CtrlTimingTypeDef *pInputTiming, + LL_I3C_CtrlBusConfTypeDef *pOutputConfig); +ErrorStatus I3C_TgtTimingComputation(const I3C_TgtTimingTypeDef *pInputTiming, + LL_I3C_TgtBusConfTypeDef *pOutputConfig); +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7RSxx_UTIL_I3C_H */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal.c new file mode 100644 index 000000000..c72795a0d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal.c @@ -0,0 +1,1497 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs (Version, Init, Tick) + (+) Services HAL APIs (DBGMCU, SBS) + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#define VREFBUF_TIMEOUT_VALUE (uint32_t)10 /* 10 ms */ + +/* Value used to increment hide protection level */ +#define SBS_HDPL_INCREMENT_VALUE (uint8_t)0x6A + +/* Value used to lock/unlock debug functionalities */ +#define SBS_DEBUG_LOCK_VALUE (uint8_t)0xC3 +#define SBS_DEBUG_UNLOCK_VALUE (uint8_t)0xB4 + +/* Mask for SBS_BKLOCKR register update */ +#define SBS_BKLOCKR_MASK (SBS_BKLOCKR_PVD_BL | \ + SBS_BKLOCKR_FLASHECC_BL | \ + SBS_BKLOCKR_CM7LCKUP_BL | \ + SBS_BKLOCKR_BKRAMECC_BL | \ + SBS_BKLOCKR_DTCMECC_BL | \ + SBS_BKLOCKR_ITCMECC_BL | \ + SBS_BKLOCKR_ARAM3ECC_BL | \ + SBS_BKLOCKR_ARAM1ECC_BL) + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup SBS_Private_Macros Private Macros + * @{ + */ +#define IS_SBS_TIMER_BREAK_INPUT(__VALUE__) \ + ((((__VALUE__) & SBS_BKLOCKR_MASK) != 0U) && \ + (((__VALUE__) & ~SBS_BKLOCKR_MASK) == 0U)) + +#define IS_SBS_IO_COMPENSATION_CODE(__VALUE__) \ + (((__VALUE__) == SBS_IO_CELL_CODE) || \ + ((__VALUE__) == SBS_IO_REGISTER_CODE)) + +#define IS_SBS_IO_COMPENSATION_CELL_PMOS_VALUE(__VALUE__) (((__VALUE__) < 16U)) +#define IS_SBS_IO_COMPENSATION_CELL_NMOS_VALUE(__VALUE__) (((__VALUE__) < 16U)) + +#define IS_SBS_ETHERNET_PHY(__VALUE__) \ + (((__VALUE__) == SBS_ETHERNET_PHY_GMII_OR_MII) || \ + ((__VALUE__) == SBS_ETHERNET_PHY_RMII)) + +#define IS_SBS_AXISRAM_WS(__VALUE__) \ + (((__VALUE__) == SBS_AXISRAM_WS_0) || \ + ((__VALUE__) == SBS_AXISRAM_WS_1)) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid priority */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32h7rsxx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on HSI clock, as HSI is the clock + * used after a system Reset and the NVIC configuration is set to Priority group 4. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use SysTick as time base source and configure 1ms tick */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief De-initialize common part of the HAL and stop the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_APB4_FORCE_RESET(); + __HAL_RCC_APB4_RELEASE_RESET(); + + __HAL_RCC_APB5_FORCE_RESET(); + __HAL_RCC_APB5_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + __HAL_RCC_AHB4_FORCE_RESET(); + __HAL_RCC_AHB4_RELEASE_RESET(); + + __HAL_RCC_AHB5_FORCE_RESET(); + __HAL_RCC_AHB5_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provide a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @param Freq tick frequency + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a period to ensure minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)uwTickFreq; + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Return the HAL revision. + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return STM32H7RSXX_HAL_VERSION; +} + +/** + * @brief Return the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Return the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return (DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @note The read address belongs to an area which may contain virgin data generating + * double ECC error (as never programmed). Thus, in case of cache activation + * the address range 0x08FFF000-0x08FFFFFF should be defined as non-cacheable + * through the MPU. + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 HAL SBS configuration functions + * @brief HAL SBS configuration functions + * +@verbatim + =============================================================================== + ##### HAL SBS configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Increment/get the HDPL value + (+) Configure the debug access + (+) Configure timer break inputs + (+) Enable/Disable the I/O analog switch voltage booster + (+) Enable/Disable the I/O analog switch supplied by VDD + (+) Configure/Enable/Disable the compensation cell (IO, XSPI1, XSPI2) + +@endverbatim + * @{ + */ + +/** + * @brief Get the boot address holding the initial vector table for Cortex-M7. + * @retval Physical boot address used by the Cortex-M7 after reset + */ +uint32_t HAL_SBS_GetBootAddress(void) +{ + return SBS->BOOTSR; +} + +/** + * @brief Increment hise protection level. + * @retval None + */ +void HAL_SBS_IncrementHDPLValue(void) +{ + MODIFY_REG(SBS->HDPLCR, SBS_HDPLCR_INCR_HDPL, SBS_HDPL_INCREMENT_VALUE); +} + +/** + * @brief Get the current value of the hide protection level. + * @retval Current hide protection level + * This value is one of @ref SBS_HDPL_Value + */ +uint32_t HAL_SBS_GetHDPLValue(void) +{ + return (SBS->HDPLSR & SBS_HDPLSR_HDPL); +} + +/** + * @brief Open the device access port. + * @note This function can be only used when device state is Closed. + * @retval None + */ +void HAL_SBS_OpenAccessPort(void) +{ + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_AP_UNLOCK, SBS_DEBUG_UNLOCK_VALUE); +} + +/** + * @brief Open the debug when the hide protection level is authorized. + * @note This function can be only used when device state is Closed. + * @retval None + */ +void HAL_SBS_OpenDebug(void) +{ + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_DBG_UNLOCK, (SBS_DEBUG_UNLOCK_VALUE << SBS_DBGCR_DBG_UNLOCK_Pos)); +} + +/** + * @brief Configure the authenticated debug hide protection level. + * @note This function can be only used when device state is Closed. + * @param Level Hide protection level where the authenticated debug opens + * This value is one of @ref SBS_HDPL_Value (except SBS_HDPL_VALUE_0) + * @retval HAL_OK if parameter is correct + * HAL_ERROR otherwise + */ +HAL_StatusTypeDef HAL_SBS_ConfigDebugLevel(uint32_t Level) +{ + /* Check the parameter */ + assert_param(IS_SBS_HDPL(Level)); + + if (Level != SBS_HDPL_VALUE_0) + { + MODIFY_REG(SBS->DBGCR, SBS_DBGCR_DBG_AUTH_HDPL, (Level << SBS_DBGCR_DBG_AUTH_HDPL_Pos)); + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Get the current value of the hide protection level. + * @note This function can be only used when device state is Closed. + * @retval Current hide protection level + * This value is one of @ref SBS_HDPL_Value + */ +uint32_t HAL_SBS_GetDebugLevel(void) +{ + return ((SBS->DBGCR & SBS_DBGCR_DBG_AUTH_HDPL) >> SBS_DBGCR_DBG_AUTH_HDPL_Pos); +} + +/** + * @brief Unlock the access to the debug control register. + * @note This function can be only used when device state is Closed. + * @retval None + */ +void HAL_SBS_UnlockDebugConfig(void) +{ + MODIFY_REG(SBS->DBGLOCKR, SBS_DBGLOCKR_DBGCFG_LOCK, SBS_DEBUG_UNLOCK_VALUE); +} + +/** + * @brief Lock the access to the debug control register. + * @note This function can be only used when device state is Closed. + * @retval None + */ +void HAL_SBS_LockDebugConfig(void) +{ + MODIFY_REG(SBS->DBGLOCKR, SBS_DBGLOCKR_DBGCFG_LOCK, SBS_DEBUG_LOCK_VALUE); +} + +/** + * @brief Configure the command passed to the RSS for execution at next reset. + * @param Cmd Command passed to the RSS for execution at next reset + * This value is between 0 and 0xFFFF + * @retval None + */ +void HAL_SBS_ConfigRSSCommand(uint32_t Cmd) +{ + MODIFY_REG(SBS->RSSCMDR, SBS_RSSCMDR_RSSCMD, Cmd); +} + +/** + * @brief Get the command passed to the RSS for execution at next reset. + * @retval Command passed to the RSS for execution at next reset + */ +uint32_t HAL_SBS_GetRSSCommand(void) +{ + return (SBS->RSSCMDR & SBS_RSSCMDR_RSSCMD); +} + +/** + * @brief Enable the I/O analog switch voltage booster + * @note Insure low VDDA voltage operation with I/O analog switch control + * @retval None + */ +void HAL_SBS_EnableIOAnalogBooster(void) +{ + MODIFY_REG(SBS->PMCR, (SBS_PMCR_BOOSTEN | SBS_PMCR_BOOSTVDDSEL), SBS_PMCR_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SBS_DisableIOAnalogBooster(void) +{ + CLEAR_BIT(SBS->PMCR, SBS_PMCR_BOOSTEN); +} + +/** + * @brief Enable the I/O analog switch supplied by VDD + * @note To be used when I/O analog switch voltage booster is not enabled + * @retval None + */ +void HAL_SBS_EnableIOAnalogSwitchVdd(void) +{ + MODIFY_REG(SBS->PMCR, (SBS_PMCR_BOOSTEN | SBS_PMCR_BOOSTVDDSEL), SBS_PMCR_BOOSTVDDSEL); +} + +/** + * @brief Disable the I/O analog switch supplied by VDD + * @retval None + */ +void HAL_SBS_DisableIOAnalogSwitchVdd(void) +{ + CLEAR_BIT(SBS->PMCR, SBS_PMCR_BOOSTVDDSEL); +} + +/** + * @brief Configure the Ethernet PHY interface + * @param Config specifies the Ethernet PHY interface + * This parameter can be one of the following values: + * @arg SBS_ETHERNET_PHY_GMII_OR_MII GMMI or MII selection + * @arg SBS_ETHERNET_PHY_RMII RMII selection + * @retval None + */ +void HAL_SBS_ConfigEthernetPHY(uint32_t Config) +{ + /* Check the parameter */ + assert_param(IS_SBS_ETHERNET_PHY(Config)); + + MODIFY_REG(SBS->PMCR, SBS_PMCR_ETH_PHYSEL, Config); +} + +/** + * @brief Configure the ECC AXISRAMs wait state when ECC=0 + * @param Config specifies the number of wait state + * This parameter can be one of the following values: + * @arg SBS_AXISRAM_WS_0 0 wait state selection + * @arg SBS_AXISRAM_WS_1 1 wait state selection + * @retval None + */ +void HAL_SBS_ConfigAXISRAMWaitState(uint32_t Config) +{ + /* Check the parameter */ + assert_param(IS_SBS_AXISRAM_WS(Config)); + + MODIFY_REG(SBS->PMCR, SBS_PMCR_AXISRAM_WS, Config); +} + +/** + * @brief Enable the compensation cell + * @param Selection specifies the concerned compensation cell + * This parameter can the combination of the following values: + * @arg SBS_IO_ANALOG_CELL Compensation cell for the I/O analog switches + * @arg SBS_IO_XSPI1_CELL Compensation cell for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_CELL Compensation cell for the I/O of the XSPI2 + * @retval None + */ +void HAL_SBS_EnableCompensationCell(uint32_t Selection) +{ + /* Check the parameter */ + assert_param(IS_SBS_COMPENSATION_CELL(Selection)); + + SET_BIT(SBS->CCCSR, Selection); +} + +/** + * @brief Disable the compensation cell + * @param Selection specifies the concerned compensation cell + * This parameter can the combination of the following values: + * @arg SBS_IO_ANALOG_CELL Compensation cell for the I/O analog switches + * @arg SBS_IO_XSPI1_CELL Compensation cell for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_CELL Compensation cell for the I/O of the XSPI2 + * @retval None + */ +void HAL_SBS_DisableCompensationCell(uint32_t Selection) +{ + /* Check the parameter */ + assert_param(IS_SBS_COMPENSATION_CELL(Selection)); + + MODIFY_REG(SBS->CCCSR, Selection, 0U); +} + +/** + * @brief Get the compensation cell ready status + * @param Selection specifies the concerned compensation cell + * This parameter can one of the following values: + * @arg SBS_IO_ANALOG_CELL_READY Compensation cell for the I/O analog switches + * @arg SBS_IO_XSPI1_CELL_READY Compensation cell for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_CELL_READY Compensation cell for the I/O of the XSPI2 + * @retval Ready status (1 or 0) + */ +uint32_t HAL_SBS_GetCompensationCellReadyStatus(uint32_t Selection) +{ + /* Check the parameter */ + assert_param(IS_SBS_COMPENSATION_CELL_READY(Selection)); + + return (((SBS->CCCSR & Selection) == 0U) ? 0UL : 1UL); +} + +/** + * @brief Configure the code selection for the compensation cell + * @param Selection specifies the concerned compensation cell + * This parameter can one of the following values: + * @arg SBS_IO_ANALOG_CELL Compensation cell for the I/O analog switches + * @arg SBS_IO_XSPI1_CELL Compensation cell for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_CELL Compensation cell for the I/O of the XSPI2 + * @param Code code selection to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg SBS_IO_CELL_CODE Code from the cell (available in the SBS_CCVALR) + * @arg SBS_IO_REGISTER_CODE Code from the compensation cell code register (SBS_CCSWVALR) + * @param NmosValue In case SBS_IO_REGISTER_CODE is selected, it provides the Nmos value + * to apply in range 0 to 15 else this parameter is not used + * @param PmosValue In case SBS_IO_REGISTER_CODE is selected, it provides the Pmos value + * to apply in range 0 to 15 else this parameter is not used + * @retval None + */ +void HAL_SBS_ConfigCompensationCell(uint32_t Selection, uint32_t Code, uint32_t NmosValue, uint32_t PmosValue) +{ + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_SBS_COMPENSATION_CELL(Selection)); + assert_param(IS_SBS_IO_COMPENSATION_CODE(Code)); + + if (Code == SBS_IO_REGISTER_CODE) + { + /* Check the parameters */ + assert_param(IS_SBS_IO_COMPENSATION_CELL_NMOS_VALUE(NmosValue)); + assert_param(IS_SBS_IO_COMPENSATION_CELL_PMOS_VALUE(PmosValue)); + + offset = ((Selection == SBS_IO_ANALOG_CELL) ? 0U : ((Selection == SBS_IO_XSPI1_CELL) ? 8U : 16U)); + + MODIFY_REG(SBS->CCSWVALR, (0xFFU << offset), ((NmosValue << offset) | (PmosValue << (offset + 4U)))); + } + + MODIFY_REG(SBS->CCCSR, (Selection << 1U), (Code << (POSITION_VAL(Selection) + 1U))); +} + +/** + * @brief Get the code selection for the compensation cell + * @param Selection specifies the concerned compensation cell + * This parameter can one of the following values: + * @arg SBS_IO_ANALOG_CELL Compensation cell for the I/O analog switches + * @arg SBS_IO_XSPI1_CELL Compensation cell for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_CELL Compensation cell for the I/O of the XSPI2 + * @param pCode pointer code selection + * This parameter can be one of the following values: + * @arg SBS_IO_CELL_CODE Code from the cell (available in the SBS_CCVALR) + * @arg SBS_IO_REGISTER_CODE Code from the compensation cell code register (SBS_CCSWVALR) + * @param pNmosValue pointer to the Nmos value in range 0 to 15 + * @param pPmosValue pointer to the Pmos value in range 0 to 15 + * @retval HAL_OK (all values available) or HAL_ERROR (check parameters) + */ +HAL_StatusTypeDef HAL_SBS_GetCompensationCell(uint32_t Selection, uint32_t *pCode, uint32_t *pNmosValue, + uint32_t *pPmosValue) +{ + uint32_t reg; + uint32_t offset; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check parameters */ + if ((pCode != NULL) && (pNmosValue != NULL) && (pPmosValue != NULL)) + { + *pCode = ((SBS->CCCSR & (Selection << 1U)) == 0U) ? SBS_IO_CELL_CODE : SBS_IO_REGISTER_CODE; + + reg = (*pCode == SBS_IO_CELL_CODE) ? (SBS->CCVALR) : (SBS->CCSWVALR); + offset = ((Selection == SBS_IO_ANALOG_CELL) ? 0U : ((Selection == SBS_IO_XSPI1_CELL) ? 8U : 16U)); + + *pNmosValue = ((reg >> offset) & 0xFU); + *pPmosValue = ((reg >> (offset + 4U)) & 0xFU); + + status = HAL_OK; + } + return status; +} + +/** + * @brief Enable the high speed at low voltage + * @param Selection specifies the concerned IOs + * This parameter can the combination of the following values: + * @arg SBS_IO_ANALOG_HSLV High speed at low voltage for the I/O analog switches + * @arg SBS_IO_XSPI1_HSLV High speed at low voltage for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_HSLV High speed at low voltage for the I/O of the XSPI2 + * @retval None + */ +void HAL_SBS_EnableIOSpeedOptimize(uint32_t Selection) +{ + /* Check the parameter */ + assert_param(IS_SBS_IOHSLV(Selection)); + + SET_BIT(SBS->CCCSR, Selection); +} + +/** + * @brief Disable the high speed at low voltage + * @param Selection specifies the concerned IOs + * This parameter can the combination of the following values: + * @arg SBS_IO_ANALOG_HSLV High speed at low voltage for the I/O analog switches + * @arg SBS_IO_XSPI1_HSLV High speed at low voltage for the I/O of the XSPI1 + * @arg SBS_IO_XSPI2_HSLV High speed at low voltage for the I/O of the XSPI2 + * @retval None + */ +void HAL_SBS_DisableIOSpeedOptimize(uint32_t Selection) +{ + /* Check the parameter */ + assert_param(IS_SBS_IOHSLV(Selection)); + + MODIFY_REG(SBS->CCCSR, Selection, 0U); +} + +/** + * @brief Configure the Timer Break input for error flag(s). + * @note When a configuration is set, only a system reset can reset it. + * @param Input input configuration + * This parameter can be one or a combinartion of the following values: + * @arg SBS_TIMER_BREAK_LOCK_PVD PVD flag + * @arg SBS_TIMER_BREAK_LOCK_FLASH FLASH double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_CORE M7 LOCKUP (Hardfault) output + * @arg SBS_TIMER_BREAK_LOCK_ITCM ITCM double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_DTCM DTCM double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_AXISRAM1 AXISRAM1 double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_AXISRAM3 AXISRAM3 double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_BKPRAM Backup SRAM double ECC error flag + * @retval None + */ +void HAL_SBS_ConfigTimerBreakInput(uint32_t Input) +{ + /* Check the parameter */ + assert_param(IS_SBS_TIMER_BREAK_INPUT(Input)); + + SET_BIT(SBS->BKLOCKR, Input); +} + +/** + * @brief Get the Timer Break input configuration. + * @note When a configuration is set, only a system reset can reset it. + * @retval Timer break input configuration + * This return value can be one or a combinartion of the following values: + * @arg SBS_TIMER_BREAK_LOCK_PVD PVD flag + * @arg SBS_TIMER_BREAK_LOCK_FLASH FLASH double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_CORE M7 LOCKUP (Hardfault) output + * @arg SBS_TIMER_BREAK_LOCK_ITCM ITCM double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_DTCM DTCM double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_AXISRAM1 AXISRAM1 double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_AXISRAM3 AXISRAM3 double ECC error flag + * @arg SBS_TIMER_BREAK_LOCK_BKPRAM Backup SRAM double ECC error flag + */ +uint32_t HAL_SBS_GetTimerBreakInputConfig(void) +{ + return (SBS->BKLOCKR & SBS_BKLOCKR_MASK); +} + +/** + * @brief Configure the source input used for EXTI. + * @param Exti EXTI event to be configured + * This parameter should be between 0 and 15 + * @param Port Port whom pin is used + * This parameter can be one of the following values: + * @arg SBS_EXTI_PIN_PORTA Port A pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTB Port B pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTC Port C pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTD Port D pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTE Port E pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTF Port F pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTG Port G pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTH Port H pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTM Port M pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTN Port N pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTO Port O pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTP Port P pin input of EXTI event detection + * @retval None + */ +void HAL_SBS_EXTIConfig(uint32_t Exti, uint32_t Port) +{ + uint32_t reg; + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_SBS_EXTI_INPUT(Exti)); + assert_param(IS_SBS_EXTI_PIN(Port)); + + reg = (Exti / 4U); + offset = (4U * (Exti % 4U)); + + MODIFY_REG(SBS->EXTICR[reg], (0xFU << offset), (Port << offset)); +} + +/** + * @brief Get the source input used for EXTI. + * @param Exti EXTI configuration requested + * This parameter should be between 0 and 15 + * @retval Return value is port whom pin is used + * This return value can be one of the following values: + * @arg SBS_EXTI_PIN_PORTA Port A pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTB Port B pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTC Port C pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTD Port D pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTE Port E pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTF Port F pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTG Port G pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTH Port H pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTM Port M pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTN Port N pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTO Port O pin input of EXTI event detection + * @arg SBS_EXTI_PIN_PORTP Port P pin input of EXTI event detection + */ +uint32_t HAL_SBS_GetEXTIConfig(uint32_t Exti) +{ + uint32_t reg; + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_SBS_EXTI_INPUT(Exti)); + + reg = (Exti / 4U); + offset = (4U * (Exti % 4U)); + + return ((SBS->EXTICR[reg] & (0xFUL << offset)) >> offset); +} +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group5 VREFBUF Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the internal voltage reference buffer voltage scale + (+) Configure the internal voltage reference buffer high impedance mode + (+) Tune the Internal Voltage Reference buffer + (+) Enable the Internal Voltage Reference buffer + (+) Disable the Internal Voltage Reference buffer + +@endverbatim + * @{ + */ + +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @arg VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg VREFBUF_VOLTAGE_SCALE2: VREF_OUT3 around 1.8 V. + * This requires VDDA equal to or higher than 2.1 V. + * @arg VREFBUF_VOLTAGE_SCALE3: VREF_OUT4 around 1.5 V. + * This requires VDDA equal to or higher than 1.8 V. + * @retval None + */ +void HAL_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_VREFBUF_Enable(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0UL) + { + if ((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_VREFBUF_Disable(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group6 HAL AXIM configuration functions + * @brief HAL AXI Interconnect Matrix (AXIM) configuration functions + * +@verbatim + =============================================================================== + ##### HAL AXIM configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configures ASIB (AMBA slave interface blocks) and AMIB (AMBA master interface blocks) parameters, + such as the QoS (quality of service) level. +@endverbatim + * @{ + */ + +/** + * @brief Enable packing for ASIB. + * @note Normal operation, Enable packing of beats to match the output data width. + * @param AsibInstance specifies the ASIB to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_1 : ASIB 1 connected to AHB master + * @arg AXIM_ASIB_2 : ASIB 2 connected to SDMMC1 master + * @retval None + */ +void HAL_AXIM_ASIB_EnablePacking(AXIM_ASIB_TypeDef *AsibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_ASIB_ALL_INSTANCE(AsibInstance)); + + /* Apply packing configuration for the selected ASIB */ + WRITE_REG(AsibInstance->FNMOD2, 0U); +} + +/** + * @brief Disable packing for ASIB. + * @note Network does not perform any packing of beats to match the output data width. + * @note Unaligned transactions are not realigned to the input data word boundary. + * @param AsibInstance specifies the ASIB to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_1 : ASIB 1 connected to AHB master + * @arg AXIM_ASIB_2 : ASIB 2 connected to SDMMC1 master + * @retval None + */ +void HAL_AXIM_ASIB_DisablePacking(AXIM_ASIB_TypeDef *AsibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_ASIB_ALL_INSTANCE(AsibInstance)); + + /* Apply packing configuration for the selected ASIB */ + WRITE_REG(AsibInstance->FNMOD2, AXIM_ASIB_FNMOD2_BYPASS_MERGE); +} + +/** + * @brief Configure ASIB read/write issuing capability. + * @param AsibInstance specifies the ASIB to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_1 : ASIB 1 connected to AHB master + * @arg AXIM_ASIB_2 : ASIB 2 connected to SDMMC1 master + * @arg AXIM_ASIB_3 : ASIB 3 connected to HPDMA master + * @arg AXIM_ASIB_4 : ASIB 4 connected to C-M7 master + * @arg AXIM_ASIB_5 : ASIB 5 connected to GPU master + * @arg AXIM_ASIB_6 : ASIB 6 connected to GPU master + * @arg AXIM_ASIB_7 : ASIB 7 connected to GPU master + * @arg AXIM_ASIB_8 : ASIB 8 connected to DCMIPP master + * @arg AXIM_ASIB_9 : ASIB 9 connected to GFXMMU master + * @arg AXIM_ASIB_10 : ASIB 10 connected to LTDC master + * @arg AXIM_ASIB_11 : ASIB 11 connected to DMA2D master + * @param ReadIssuing specifies the Read issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_READ_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_ASIB_READ_ISS_FORCE_TO_1: Force issuing capability to 1. + * @param WriteIssuing specifies the write issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_WRITE_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_ASIB_WRITE_ISS_FORCE_TO_1: Force issuing capability to 1. + * @retval None + */ +void HAL_AXIM_ASIB_IssuingConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t ReadIssuing, uint32_t WriteIssuing) +{ + /* Check the parameters */ + assert_param(IS_AXIM_ASIB_ALL_INSTANCE(AsibInstance)); + assert_param(IS_AXIM_ASIB_READ_ISS(ReadIssuing)); + assert_param(IS_AXIM_ASIB_WRITE_ISS(WriteIssuing)); + + /* Apply read/write issuing configuration for the selected ASIB */ + WRITE_REG(AsibInstance->FNMOD, (ReadIssuing | WriteIssuing)); +} + +/** + * @brief Configure ASIB read QOS priority. + * @param AsibInstance specifies the ASIB to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_1 : ASIB 1 connected to AHB master + * @arg AXIM_ASIB_2 : ASIB 2 connected to SDMMC1 master + * @arg AXIM_ASIB_3 : ASIB 3 connected to HPDMA master + * @arg AXIM_ASIB_4 : ASIB 4 connected to C-M7 master + * @arg AXIM_ASIB_5 : ASIB 5 connected to GPU master + * @arg AXIM_ASIB_6 : ASIB 6 connected to GPU master + * @arg AXIM_ASIB_7 : ASIB 7 connected to GPU master + * @arg AXIM_ASIB_8 : ASIB 8 connected to DCMIPP master + * @arg AXIM_ASIB_9 : ASIB 9 connected to GFXMMU master + * @arg AXIM_ASIB_10 : ASIB 10 connected to LTDC master + * @arg AXIM_ASIB_11 : ASIB 11 connected to DMA2D master + * @param QosPriority specifies read channel QoS setting + * This parameter can be a value between 0 to 15. + * With 0 value (default value) for the lowest priority and 15 value for Highest priority. + * @retval None + */ +void HAL_AXIM_ASIB_ReadQoSConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t QosPriority) +{ + /* Check the parameters */ + assert_param(IS_AXIM_ASIB_ALL_INSTANCE(AsibInstance)); + assert_param(IS_AXIM_QOS(QosPriority)); + + /* Apply read QOS priority setting for the selected ASIB */ + WRITE_REG(AsibInstance->READQOS, QosPriority); +} + +/** + * @brief Configure ASIB write QOS priority. + * @param AsibInstance specifies the ASIB to configure + * This parameter can be one of the following values: + * @arg AXIM_ASIB_1 : ASIB 1 connected to AHB master + * @arg AXIM_ASIB_2 : ASIB 2 connected to SDMMC1 master + * @arg AXIM_ASIB_3 : ASIB 3 connected to HPDMA master + * @arg AXIM_ASIB_4 : ASIB 4 connected to C-M7 master + * @arg AXIM_ASIB_5 : ASIB 5 connected to GPU master + * @arg AXIM_ASIB_6 : ASIB 6 connected to GPU master + * @arg AXIM_ASIB_7 : ASIB 7 connected to GPU master + * @arg AXIM_ASIB_8 : ASIB 8 connected to DCMIPP master + * @arg AXIM_ASIB_9 : ASIB 9 connected to GFXMMU master + * @arg AXIM_ASIB_10 : ASIB 10 connected to LTDC master + * @arg AXIM_ASIB_11 : ASIB 11 connected to DMA2D master + * @param QosPriority specifies write channel QoS setting + * This parameter can be a value between 0 to 15. + * With 0 value (default value) for the lowest priority and 15 value for highest priority. + * + * @retval None + */ +void HAL_AXIM_ASIB_WriteQoSConfig(AXIM_ASIB_TypeDef *AsibInstance, uint32_t QosPriority) +{ + /* Check the parameters */ + assert_param(IS_AXIM_ASIB_ALL_INSTANCE(AsibInstance)); + assert_param(IS_AXIM_QOS(QosPriority)); + + /* Apply write QOS priority setting for the selected ASIB */ + WRITE_REG(AsibInstance->WRITEQOS, QosPriority); +} + +/** + * @brief Enable Packing for AMIB. + * @note Normal operation, Enable packing of beats to match the output data width. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @retval None + */ +void HAL_AXIM_AMIB_EnablePacking(AXIM_AMIB_TypeDef *AmibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + + /* Apply packing configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMOD2, 0U); +} + +/** + * @brief Disable Packing for AMIB. + * @note Network does not perform any packing of beats to match the output data width. + * @note Unaligned transactions are not realigned to the input data word boundary. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @retval None + */ +void HAL_AXIM_AMIB_DisablePacking(AXIM_AMIB_TypeDef *AmibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + + /* Apply packing configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMOD2, AXIM_AMIB_FNMOD2_BYPASS_MERGE); +} + +/** + * @brief Configure AMIB read/write issuing capability. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_1 : AMIB 1 connected to GFXMMU slave + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @arg AXIM_AMIB_3 : AMIB 3 connected to FMC slave + * @arg AXIM_AMIB_4 : AMIB 4 connected to XSPI1 slave + * @arg AXIM_AMIB_5 : AMIB 5 connected to XSPI2 slave + * @arg AXIM_AMIB_6 : AMIB 6 connected to AXI SRAM4 slave + * @arg AXIM_AMIB_7 : AMIB 7 connected to AXI SRAM3 slave + * @arg AXIM_AMIB_8 : AMIB 8 connected to AXI SRAM2 slave + * @arg AXIM_AMIB_9 : AMIB 9 connected to AXI SRAM1 slave + * @arg AXIM_AMIB_10 : AMIB 10 connected to FLASH slave + * @param ReadIssuing specifies the Read issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_READ_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_AMIB_READ_ISS_FORCE_TO_1: Force issuing capability to 1. + * @param WriteIssuing specifies the write issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_WRITE_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_AMIB_WRITE_ISS_FORCE_TO_1: Force issuing capability to 1. + * @retval None + */ +void HAL_AXIM_AMIB_IssuingConfig(AXIM_AMIB_TypeDef *AmibInstance, uint32_t ReadIssuing, uint32_t WriteIssuing) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + assert_param(IS_AXIM_AMIB_READ_ISS(ReadIssuing)); + assert_param(IS_AXIM_AMIB_WRITE_ISS(WriteIssuing)); + + /* Apply read/write issuing configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMOD, (ReadIssuing | WriteIssuing)); +} + +/** + * @brief Configure AMIB read/write issuing bus matrix capability. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_1 : AMIB 1 connected to GFXMMU slave + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @arg AXIM_AMIB_3 : AMIB 3 connected to FMC slave + * @arg AXIM_AMIB_4 : AMIB 4 connected to XSPI1 slave + * @arg AXIM_AMIB_5 : AMIB 5 connected to XSPI2 slave + * @arg AXIM_AMIB_6 : AMIB 6 connected to AXI SRAM4 slave + * @arg AXIM_AMIB_7 : AMIB 7 connected to AXI SRAM3 slave + * @arg AXIM_AMIB_8 : AMIB 8 connected to AXI SRAM2 slave + * @arg AXIM_AMIB_9 : AMIB 9 connected to AXI SRAM1 slave + * @arg AXIM_AMIB_10 : AMIB 10 connected to FLASH slave + * @param ReadIssuing specifies the Read issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_READ_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_AMIB_READ_ISS_FORCE_TO_1: Force issuing capability to 1. + * @param WriteIssuing specifies the write issuing capability to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_WRITE_ISS_NORMAL : Normal issuing capability, default value. + * @arg AXIM_AMIB_WRITE_ISS_FORCE_TO_1: Force issuing capability to 1. + * @retval None + */ +void HAL_AXIM_AMIB_IssuingConfigBusMatrix(AXIM_AMIB_TypeDef *AmibInstance, uint32_t ReadIssuing, uint32_t WriteIssuing) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + assert_param(IS_AXIM_AMIB_READ_ISS_BM(ReadIssuing)); + assert_param(IS_AXIM_AMIB_WRITE_ISS_BM(WriteIssuing)); + + /* Apply read/write issuing configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMODBMISS, (ReadIssuing | WriteIssuing)); +} + +/** + * @brief Enable Long burst for AMIB. + * @note Long bursts can be generated at the output of the AMIB. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @retval None + */ +void HAL_AXIM_AMIB_EnableLongBurst(AXIM_AMIB_TypeDef *AmibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + + /* Apply Long burst configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMODLB, AXIM_AMIB_FNMODLB_LONG_BURST); +} + +/** + * @brief Disable Long burst for AMIB. + * @note Long bursts can not be generated at the output of the AMIB. + * @param AmibInstance specifies the AMIB to configure + * This parameter can be one of the following values: + * @arg AXIM_AMIB_2 : AMIB 2 connected to AHB Sram slave + * @retval None + */ +void HAL_AXIM_AMIB_DisableLongBurst(AXIM_AMIB_TypeDef *AmibInstance) +{ + /* Check the parameters */ + assert_param(IS_AXIM_AMIB_ALL_INSTANCE(AmibInstance)); + + /* Apply Long burst configuration for the selected AMIB */ + WRITE_REG(AmibInstance->FNMODLB, 0U); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc.c new file mode 100644 index 000000000..bde447a4b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc.c @@ -0,0 +1,3768 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * Other functions (extended functions) are available in file + * "stm32h7rsxx_hal_adc_ex.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. + + (+) Interrupt generation at the end of regular conversion and in case of + analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (channel wise) + + (+) External trigger (timer or EXTI) with configurable polarity + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) Configurable delay between conversions in Dual interleaved mode. + + (+) ADC channels selectable single/differential input. + + (+) ADC offset shared on 4 offset instances. + (+) ADC calibration + + (+) ADC conversion of regular group. + + (+) ADC supply requirements: 1.62 V to 3.6 V. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock, also possibly conversion clock). + + (+++) ADC clock (conversions clock). + Two possible clock sources: synchronous clock derived from AHB clock + or asynchronous clock derived from system clock or PLL. + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory) + + RCC_ADCCLKSOURCE_PLL enable: (optional: if asynchronous clock selected) + (+++) RCC_PeriphClkInitTypeDef RCC_PeriphClkInit; + (+++) PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC; + (+++) PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PLL; + (+++) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + + (++) ADC clock source and clock prescaler are configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, group regular, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14; + (+++) RCC_OscInitStructure.HSI14State = RCC_HSI14_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) InjectedConvCpltCallback : ADC group injected conversion complete callback + (+) InjectedQueueOverflowCallback : ADC group injected context queue overflow callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) InjectedConvCpltCallback : ADC group injected conversion complete callback + (+) InjectedQueueOverflowCallback : ADC group injected context queue overflow callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +#define ADC_CFGR_FIELDS_1 (ADC_CFGR_RES | ADC_CFGR_ALIGN |\ + ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ + ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM |\ + ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL) /*!< ADC_CFGR fields of parameters that can + be updated when no regular conversion is on-going */ + +/* Timeout values for ADC operations (enable settling time, */ +/* disable settling time, ...). */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescalers. */ +#define ADC_ENABLE_TIMEOUT (2UL) /*!< ADC enable time-out value */ +#define ADC_DISABLE_TIMEOUT (2UL) /*!< ADC disable time-out value */ + +/* Timeout to wait for current conversion on going to be completed. */ +/* Timeout fixed to longest ADC conversion possible, for 1 channel: */ +/* - maximum sampling time (640.5 adc_clk) */ +/* - ADC resolution (Tsar 12 bits= 12.5 adc_clk) */ +/* - System clock / ADC clock <= 4096 (hypothesis of maximum clock ratio) */ +/* - ADC oversampling ratio 256 */ +/* Calculation: 653 * 4096 * 256 CPU clock cycles max */ +/* Unit: cycles of CPU clock. */ +#define ADC_CONVERSION_TIME_MAX_CPU_CYCLES (653UL * 4096UL * 256UL) /*!< ADC conversion completion time-out value */ + + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @note Parameters related to common ADC registers (ADC clock mode) are set + * only if all ADCs are disabled. + * If this is not the case, these common parameters setting are + * bypassed without error reporting: it can be the intended behaviour in + * case of update of a parameter of ADC_InitTypeDef on the fly, + * without disabling the other ADCs. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_cfgr; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + __IO uint32_t wait_loop_index = 0UL; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_ADC_SAMPLINGMODE(hadc->Init.SamplingMode)); + assert_param(IS_ADC_CONVERSIONDATAMGT(hadc->Init.ConversionDataManagement)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + assert_param(IS_ADC_REGULAR_DISCONT_NUMBER(hadc->Init.NbrOfDiscConversion)); + } + } + + /* DISCEN and CONT bits cannot be set at the same time */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; /* Legacy weak callback */ + hadc->InjectedQueueOverflowCallback = HAL_ADCEx_InjectedQueueOverflowCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + /* - Exit from deep-power-down mode and ADC voltage regulator enable */ + if (LL_ADC_IsDeepPowerDownEnabled(hadc->Instance) != 0UL) + { + /* Disable ADC deep power down mode */ + LL_ADC_DisableDeepPowerDown(hadc->Instance); + + /* System was in deep power down mode, calibration must + be relaunched or a previously saved calibration factor + re-applied once the ADC voltage regulator is enabled */ + } + + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Enable ADC internal voltage regulator */ + LL_ADC_EnableInternalRegulator(hadc->Instance); + + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Verification that ADC voltage regulator is correctly enabled, whether */ + /* or not ADC is coming from state reset (if any potential problem of */ + /* clocking, voltage regulator would not be enabled). */ + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed and if there is no conversion on going on regular */ + /* group (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - clock configuration */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) == 0UL) + { + /* Reset configuration of ADC common register CCR: */ + /* */ + /* - ADC clock mode and ACC prescaler (CKMODE and PRESC bits)are set */ + /* according to adc->Init.ClockPrescaler. It selects the clock */ + /* source and sets the clock division factor. */ + /* */ + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - when multimode feature is available, multimode-related */ + /* parameters: MDMA, DMACFG, DELAY, DUAL (set by API */ + /* HAL_ADCEx_MultiModeConfigChannel() ) */ + /* - internal measurement paths: Vbat, temperature sensor, Vref */ + /* (set into HAL_ADC_ConfigChannel() or */ + /* HAL_ADCEx_InjectedConfigChannel() ) */ + LL_ADC_SetCommonClock(__LL_ADC_COMMON_INSTANCE(hadc->Instance), hadc->Init.ClockPrescaler); + } + } + + /* Configuration of ADC: */ + /* - resolution Init.Resolution */ + /* - data alignment Init.DataAlign */ + /* - external trigger to start conversion Init.ExternalTrigConv */ + /* - external trigger polarity Init.ExternalTrigConvEdge */ + /* - continuous conversion mode Init.ContinuousConvMode */ + /* - overrun Init.Overrun */ + /* - discontinuous mode Init.DiscontinuousConvMode */ + /* - discontinuous mode channel count Init.NbrOfDiscConversion */ + tmp_cfgr = (ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + hadc->Init.Overrun | + hadc->Init.DataAlign | + hadc->Init.Resolution | + ADC_CFGR_REG_DISCONTINUOUS((uint32_t)hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + tmp_cfgr |= ADC_CFGR_DISCONTINUOUS_NUM(hadc->Init.NbrOfDiscConversion); + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmp_cfgr |= ((hadc->Init.ExternalTrigConv & ADC_CFGR_EXTSEL) + | hadc->Init.ExternalTrigConvEdge + ); + } + + /* Update Configuration Register CFGR */ + MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_1, tmp_cfgr); + + /* Configuration of sampling mode */ + MODIFY_REG(hadc->Instance->CFGR2, ADC_CFGR2_BULB | ADC_CFGR2_SMPTRIG, hadc->Init.SamplingMode); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular and injected groups: */ + /* - DMA continuous request Init.DMAContinuousRequests */ + /* - LowPowerAutoWait feature Init.LowPowerAutoWait */ + /* - Oversampling parameters Init.Oversampling */ + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + tmp_cfgr = ( + ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + hadc->Init.ConversionDataManagement); + + MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_2, tmp_cfgr); + + if (hadc->Init.OversamplingMode == ENABLE) + { + assert_param(IS_ADC_OVERSAMPLING_RATIO(hadc->Init.Oversampling.Ratio)); + assert_param(IS_ADC_RIGHT_BIT_SHIFT(hadc->Init.Oversampling.RightBitShift)); + assert_param(IS_ADC_TRIGGERED_OVERSAMPLING_MODE(hadc->Init.Oversampling.TriggeredMode)); + assert_param(IS_ADC_REGOVERSAMPLING_MODE(hadc->Init.Oversampling.OversamplingStopReset)); + + /* Configuration of Oversampler: */ + /* - Oversampling Ratio */ + /* - Right bit shift */ + /* - Triggered mode */ + /* - Oversampling mode (continued/resumed) */ + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TROVS | + ADC_CFGR2_ROVSM, + ADC_CFGR2_ROVSE | + hadc->Init.Oversampling.Ratio | + hadc->Init.Oversampling.RightBitShift | + hadc->Init.Oversampling.TriggeredMode | + hadc->Init.Oversampling.OversamplingStopReset + ); + } + else + { + /* Disable ADC oversampling scope on ADC group regular */ + CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE); + } + + } + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + + if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Set number of ranks in regular group sequencer */ + MODIFY_REG(hadc->Instance->SQR1, ADC_SQR1_L, (hadc->Init.NbrOfConversion - (uint8_t)1)); + } + else + { + CLEAR_BIT(hadc->Instance->SQR1, ADC_SQR1_L); + } + + /* Initialize the ADC state */ + /* Clear HAL_ADC_STATE_BUSY_INTERNAL bit, set HAL_ADC_STATE_READY bit */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL, HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @note For devices with several ADCs: reset of ADC common registers is done + * only if all ADCs sharing the same common group are disabled. + * (function "HAL_ADC_MspDeInit()" is also called under the same conditions: + * all ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * If this is not the case, reset of these common parameters reset is + * bypassed without error reporting: it can be the intended behavior in + * case of reset of a single ADC while the other ADCs sharing the same + * common group is still running. + * @note By default, HAL_ADC_DeInit() set ADC in mode deep power-down: + * this saves more power by reducing leakage currents + * and is particularly interesting before entering MCU low-power modes. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + /* Flush register JSQR: reset the queue sequencer when injected */ + /* queue sequencer is enabled and ADC disabled. */ + /* The software and hardware triggers of the injected sequence are both */ + /* internally disabled just after the completion of the last valid */ + /* injected sequence. */ + SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | ADC_IT_AWD1 | + ADC_IT_JQOVF | ADC_IT_OVR | + ADC_IT_JEOS | ADC_IT_JEOC | + ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY)); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | ADC_FLAG_AWD1 | + ADC_FLAG_JQOVF | ADC_FLAG_OVR | + ADC_FLAG_JEOS | ADC_FLAG_JEOC | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + + /* Reset register CR */ + /* Bits ADC_CR_JADSTP, ADC_CR_ADSTP, ADC_CR_JADSTART, ADC_CR_ADSTART, + ADC_CR_ADCAL, ADC_CR_ADDIS and ADC_CR_ADEN are in access mode "read-set": + no direct reset applicable. + Update CR register to reset value where doable by software */ + CLEAR_BIT(hadc->Instance->CR, ADC_CR_ADVREGEN | ADC_CR_ADCALDIF); + SET_BIT(hadc->Instance->CR, ADC_CR_DEEPPWD); + + /* Reset register CFGR */ + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_FIELDS); + SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); + + /* Reset register CFGR2 */ + CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS | + ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE); + + /* Reset register SMPR1 */ + CLEAR_BIT(hadc->Instance->SMPR1, ADC_SMPR1_FIELDS); + + /* Reset register SMPR2 */ + CLEAR_BIT(hadc->Instance->SMPR2, ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | ADC_SMPR2_SMP16 | + ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | ADC_SMPR2_SMP13 | + ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | ADC_SMPR2_SMP10); + + /* Reset register TR1 */ + CLEAR_BIT(hadc->Instance->TR1, ADC_TR1_HT1 | ADC_TR1_LT1); + + /* Reset register TR2 */ + CLEAR_BIT(hadc->Instance->TR2, ADC_TR2_HT2 | ADC_TR2_LT2); + + /* Reset register TR3 */ + CLEAR_BIT(hadc->Instance->TR3, ADC_TR3_HT3 | ADC_TR3_LT3); + + /* Reset register SQR1 */ + CLEAR_BIT(hadc->Instance->SQR1, ADC_SQR1_SQ4 | ADC_SQR1_SQ3 | ADC_SQR1_SQ2 | + ADC_SQR1_SQ1 | ADC_SQR1_L); + + /* Reset register SQR2 */ + CLEAR_BIT(hadc->Instance->SQR2, ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 | + ADC_SQR2_SQ6 | ADC_SQR2_SQ5); + + /* Reset register SQR3 */ + CLEAR_BIT(hadc->Instance->SQR3, ADC_SQR3_SQ14 | ADC_SQR3_SQ13 | ADC_SQR3_SQ12 | + ADC_SQR3_SQ11 | ADC_SQR3_SQ10); + + /* Reset register SQR4 */ + CLEAR_BIT(hadc->Instance->SQR4, ADC_SQR4_SQ16 | ADC_SQR4_SQ15); + + /* Register JSQR was reset when the ADC was disabled */ + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable*/ + + /* Reset register OFR1 */ + CLEAR_BIT(hadc->Instance->OFR1, ADC_OFR1_OFFSET1_EN | ADC_OFR1_OFFSET1_CH | ADC_OFR1_OFFSET1); + /* Reset register OFR2 */ + CLEAR_BIT(hadc->Instance->OFR2, ADC_OFR2_OFFSET2_EN | ADC_OFR2_OFFSET2_CH | ADC_OFR2_OFFSET2); + /* Reset register OFR3 */ + CLEAR_BIT(hadc->Instance->OFR3, ADC_OFR3_OFFSET3_EN | ADC_OFR3_OFFSET3_CH | ADC_OFR3_OFFSET3); + /* Reset register OFR4 */ + CLEAR_BIT(hadc->Instance->OFR4, ADC_OFR4_OFFSET4_EN | ADC_OFR4_OFFSET4_CH | ADC_OFR4_OFFSET4); + + /* Reset registers JDR1, JDR2, JDR3, JDR4 */ + /* bits in access mode read only, no direct reset applicable*/ + + /* Reset register AWD2CR */ + CLEAR_BIT(hadc->Instance->AWD2CR, ADC_AWD2CR_AWD2CH); + + /* Reset register AWD3CR */ + CLEAR_BIT(hadc->Instance->AWD3CR, ADC_AWD3CR_AWD3CH); + + /* Reset register DIFSEL */ + CLEAR_BIT(hadc->Instance->DIFSEL, ADC_DIFSEL_DIFSEL); + + /* Reset register CALFACT */ + CLEAR_BIT(hadc->Instance->CALFACT, ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S); + + + /* ========== Reset common ADC registers ========== */ + + /* Software is allowed to change common parameters only when all the other + ADCs are disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) == 0UL) + { + /* Reset configuration of ADC common register CCR: + - clock mode: CKMODE, PRESCEN + - multimode related parameters (when this feature is available): MDMA, + DMACFG, DELAY, DUAL (set by HAL_ADCEx_MultiModeConfigChannel() API) + - internal measurement paths: Vbat, temperature sensor, Vref (set into + HAL_ADC_ConfigChannel() or HAL_ADCEx_InjectedConfigChannel() ) + */ + ADC_CLEAR_COMMON_CONTROL_REGISTER(hadc); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripherals instances */ + /* sharing the same common ADC instance: ADC state is forced to */ + /* a similar state as after device power-on. */ + /* Note: A possible implementation is to add RCC bus reset of ADC */ + /* (for example, using macro */ + /* __HAL_RCC_ADC..._FORCE_RESET()/..._RELEASE_RESET()/..._CLK_DISABLE()) */ + /* in function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Reset injected channel configuration parameters */ + hadc->InjectionConfig.ContextQueue = 0; + hadc->InjectionConfig.ChannelCount = 0; + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID + * @arg @ref HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID ADC group injected context queue overflow callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : + hadc->InjectedConvCpltCallback = pCallback; + break; + + case HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID : + hadc->InjectedQueueOverflowCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = pCallback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID ADC group injected conversion complete callback ID + * @arg @ref HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID ADC group injected context queue overflow callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : + hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; + break; + + case HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID : + hadc->InjectedQueueOverflowCallback = HAL_ADCEx_InjectedQueueOverflowCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion of regular group. + * @note Interruptions enabled in this function: None. + * @note Case of multimode enabled (when multimode feature is available): + * if ADC is Slave, ADC is enabled but conversion is not started, + * if ADC is master, ADC is enabled and multimode conversion is started. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; +#if defined(ADC_MULTIMODE_SUPPORT) + const ADC_TypeDef *tmpADC_Master; + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Reset HAL_ADC_STATE_MULTIMODE_SLAVE bit + - if ADC instance is master or if multimode feature is not available + - if multimode setting is disabled (ADC instance slave in independent mode) */ + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + ) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Set ADC error code */ + /* Check if a conversion is on going on ADC group injected */ + if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) + { + /* Reset ADC error code fields related to regular conversions only */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled (when multimode feature is available): */ + /* - if ADC is slave and dual regular conversions are enabled, ADC is */ + /* enabled only (conversion is not started), */ + /* - if ADC is master, ADC is enabled and conversion is started. */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) + { + /* ADC instance is not a multimode slave instance with multimode regular conversions enabled */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* ADC instance is a multimode slave instance with multimode regular conversions enabled */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + /* if Master ADC JAUTO bit is set, update Slave State in setting + HAL_ADC_STATE_INJ_BUSY bit and in resetting HAL_ADC_STATE_INJ_EOC bit */ + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + if (READ_BIT(tmpADC_Master->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + } +#else + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + } + + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); +#endif /* ADC_MULTIMODE_SUPPORT */ + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC groups regular and injected */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_Flag_End; + uint32_t tmp_cfgr; +#if defined(ADC_MULTIMODE_SUPPORT) + const ADC_TypeDef *tmpADC_Master; + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of conversion selected to end of sequence conversions */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_Flag_End = ADC_FLAG_EOS; + } + /* If end of conversion selected to end of unitary conversion */ + else /* ADC_EOC_SINGLE_CONV */ + { + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) + { + /* Check ADC DMA mode in independent mode on ADC group regular */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN) != 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } + } + else + { + /* Check ADC DMA mode in multimode on ADC group regular */ + if (LL_ADC_GetMultiDMATransfer(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) != LL_ADC_MULTI_REG_DMA_EACH_ADC) + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } + } +#else + /* Check ADC DMA mode */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN) != 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + } + + /* Get relevant register CFGR in ADC instance of ADC master or slave */ + /* in function of multimode state (for devices with multimode */ + /* available). */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) + { + /* Retrieve handle ADC CFGR register */ + tmp_cfgr = READ_REG(hadc->Instance->CFGR); + } + else + { + /* Retrieve Master ADC CFGR register */ + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + tmp_cfgr = READ_REG(tmpADC_Master->CFGR); + } +#else + /* Retrieve handle ADC CFGR register */ + tmp_cfgr = READ_REG(hadc->Instance->CFGR); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Clear polled flag */ + if (tmp_Flag_End == ADC_FLAG_EOS) + { + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOS); + } + else + { + /* Clear end of conversion EOC flag of regular group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ + /* until data register is read using function HAL_ADC_GetValue(). */ + if (READ_BIT(tmp_cfgr, ADC_CFGR_AUTDLY) == 0UL) + { + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * @arg @ref ADC_EOSMP_EVENT ADC End of Sampling event + * @arg @ref ADC_AWD1_EVENT ADC Analog watchdog 1 event (main analog watchdog, present on + * all STM32 series) + * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on + * all STM32 series) + * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on + * all STM32 series) + * @arg @ref ADC_OVR_EVENT ADC Overrun event + * @arg @ref ADC_JQOVF_EVENT ADC Injected context queue overflow event + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_OVR_DATA_OVERWRITTEN. Otherwise, data register may be potentially overwritten + * by a new converted data as soon as OVR is cleared. + * To reset OVR flag once the preserved data is retrieved, the user can resort + * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + switch (EventType) + { + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + + break; + + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + + break; + + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + + break; + + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + + break; + + /* Injected context queue overflow event */ + case ADC_JQOVF_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF); + + /* Set ADC error code to Injected context queue overflow */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); + + /* Clear ADC Injected context queue overflow flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JQOVF); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of regular group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note Case of multimode enabled (when multimode feature is available): + * HAL_ADC_Start_IT() must be called for ADC Slave first, then for + * ADC Master. + * For ADC Slave, ADC is enabled only (conversion is not started). + * For ADC Master, ADC is enabled and multimode conversion is started. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @note By default, HAL_ADC_Start_IT() does not enable the End Of Sampling + * interruption. If required (e.g. in case of oversampling with trigger + * mode), the user must: + * 1. first clear the EOSMP flag if set with macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP) + * 2. then enable the EOSMP interrupt with macro __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOSMP) + * before calling HAL_ADC_Start_IT(). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; +#if defined(ADC_MULTIMODE_SUPPORT) + const ADC_TypeDef *tmpADC_Master; + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Reset HAL_ADC_STATE_MULTIMODE_SLAVE bit + - if ADC instance is master or if multimode feature is not available + - if multimode setting is disabled (ADC instance slave in independent mode) */ + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + ) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Set ADC error code */ + /* Check if a conversion is on going on ADC group injected */ + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL) + { + /* Reset ADC error code fields related to regular conversions only */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + break; + } + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_OVR_DATA_PRESERVED, only then is + ADC_IT_OVR enabled; otherwise data overwrite is considered as normal + behavior and no CPU time is lost for a non-processed interruption */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled (when multimode feature is available): */ + /* - if ADC is slave and dual regular conversions are enabled, ADC is */ + /* enabled only (conversion is not started), */ + /* - if ADC is master, ADC is enabled and conversion is started. */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) + { + /* ADC instance is not a multimode slave instance with multimode regular conversions enabled */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + + /* Enable as well injected interruptions in case + HAL_ADCEx_InjectedStart_IT() has not been called beforehand. This + allows to start regular and injected conversions when JAUTO is + set with a single call to HAL_ADC_Start_IT() */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOS); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + break; + } + } + + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* ADC instance is a multimode slave instance with multimode regular conversions enabled */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + /* if Master ADC JAUTO bit is set, Slave injected interruptions + are enabled nevertheless (for same reason as above) */ + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + if (READ_BIT(tmpADC_Master->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + /* First, update Slave State in setting HAL_ADC_STATE_INJ_BUSY bit + and in resetting HAL_ADC_STATE_INJ_EOC bit */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + /* Next, set Slave injected interruptions */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOS); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + break; + } + } + } +#else + /* ADC instance is not a multimode slave instance with multimode regular conversions enabled */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO) != 0UL) + { + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY); + + /* Enable as well injected interruptions in case + HAL_ADCEx_InjectedStart_IT() has not been called beforehand. This + allows to start regular and injected conversions when JAUTO is + set with a single call to HAL_ADC_Start_IT() */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOS); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + break; + } + } + + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); +#endif /* ADC_MULTIMODE_SUPPORT */ + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC groups regular and injected */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of regular group and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @note Case of multimode enabled (when multimode feature is available): HAL_ADC_Start_DMA() + * is designed for single-ADC mode only. For multimode, the dedicated + * HAL_ADCEx_MultiModeStart_DMA() function must be used. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; +#if defined(ADC_MULTIMODE_SUPPORT) + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + uint32_t length_bytes; + DMA_NodeConfTypeDef node_conf; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Ensure that multimode regular conversions are not enabled. */ + /* Otherwise, dedicated API HAL_ADCEx_MultiModeStart_DMA() must be used. */ + if ((tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) +#endif /* ADC_MULTIMODE_SUPPORT */ + { + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Reset HAL_ADC_STATE_MULTIMODE_SLAVE bit + - if ADC instance is master or if multimode feature is not available + - if multimode setting is disabled (ADC instance slave in independent mode) */ + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + ) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check if a conversion is on going on ADC group injected */ + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL) + { + /* Reset ADC error code fields related to regular conversions only */ + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); + } + else + { + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, */ + /* ADC start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* With DMA, overrun event is always considered as an error even if + hadc->Init.Overrun is set to ADC_OVR_DATA_OVERWRITTEN. Therefore, + ADC_IT_OVR is enabled. */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Enable ADC DMA mode */ + SET_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN); + + /* Check linkedlist mode */ + if ((hadc->DMA_Handle->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hadc->DMA_Handle->LinkedListQueue != NULL) && (hadc->DMA_Handle->LinkedListQueue->Head != NULL)) + { + /* Length should be converted to number of bytes */ + if (HAL_DMAEx_List_GetNodeConfig(&node_conf, hadc->DMA_Handle->LinkedListQueue->Head) != HAL_OK) + { + return HAL_ERROR; + } + + /* Length should be converted to number of bytes */ + if (node_conf.Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + /* Word -> Bytes */ + length_bytes = Length * 4U; + } + else if (node_conf.Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + /* Halfword -> Bytes */ + length_bytes = Length * 2U; + } + else /* Bytes */ + { + /* Same size already expressed in Bytes */ + length_bytes = Length; + } + + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = (uint32_t)length_bytes; + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = \ + (uint32_t)&hadc->Instance->DR; + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + tmp_hal_status = HAL_DMAEx_List_Start_IT(hadc->DMA_Handle); + } + else + { + return HAL_ERROR; + } + } + else + { + /* Length should be converted to number of bytes */ + if (hadc->DMA_Handle->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + /* Word -> Bytes */ + length_bytes = Length * 4U; + } + else if (hadc->DMA_Handle->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + /* Halfword -> Bytes */ + length_bytes = Length * 2U; + } + else /* Bytes */ + { + /* Same size already expressed in Bytes */ + length_bytes = Length; + } + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, \ + length_bytes); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + } +#if defined(ADC_MULTIMODE_SUPPORT) + else + { + tmp_hal_status = HAL_ERROR; + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on ADC group injected. If ADC group injected is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @note Case of multimode enabled (when multimode feature is available): + * HAL_ADC_Stop_DMA() function is dedicated to single-ADC mode only. + * For multimode, the dedicated HAL_ADCEx_MultiModeStop_DMA() API must be used. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC group regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN); + + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Start ADC conversion sampling phase of regular group + * @note: This function should only be called to start sampling when + * - @ref ADC_SAMPLING_MODE_TRIGGER_CONTROLED sampling + * mode has been selected + * - @ref ADC_SOFTWARE_START has been selected as trigger source + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_StartSampling(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Start sampling */ + SET_BIT(hadc->Instance->CFGR2, ADC_CFGR2_SWTRIG); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop ADC conversion sampling phase of regular group and start conversion + * @note: This function should only be called to stop sampling when + * - @ref ADC_SAMPLING_MODE_TRIGGER_CONTROLED sampling + * mode has been selected + * - @ref ADC_SOFTWARE_START has been selected as trigger source + * - after sampling has been started using @ref HAL_ADC_StartSampling. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_StopSampling(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Start sampling */ + CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_SWTRIG); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_isr = hadc->Instance->ISR; + uint32_t tmp_ier = hadc->Instance->IER; + uint32_t tmp_adc_inj_is_trigger_source_sw_start; + uint32_t tmp_adc_reg_is_trigger_source_sw_start; + uint32_t tmp_cfgr; +#if defined(ADC_MULTIMODE_SUPPORT) + const ADC_TypeDef *tmpADC_Master; + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + + /* ========== Check End of Sampling flag for ADC group regular ========== */ + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + { + /* Update state machine on end of sampling status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + } + + /* End Of Sampling callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->EndOfSamplingCallback(hadc); +#else + HAL_ADCEx_EndOfSamplingCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + } + + /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + { + /* Get relevant register CFGR in ADC instance of ADC master or slave */ + /* in function of multimode state (for devices with multimode */ + /* available). */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_INJ_ALTERN) + ) + { + /* check CONT bit directly in handle ADC CFGR register */ + tmp_cfgr = READ_REG(hadc->Instance->CFGR); + } + else + { + /* else need to check Master ADC CONT bit */ + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + tmp_cfgr = READ_REG(tmpADC_Master->CFGR); + } +#else + tmp_cfgr = READ_REG(hadc->Instance->CFGR); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Carry on if continuous mode is disabled */ + if (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) != ADC_CFGR_CONT) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of sequence conversion interrupt */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if ( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + /* Note: in case of overrun set to ADC_OVR_DATA_PRESERVED, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* ====== Check ADC group injected end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_JEOC) == ADC_FLAG_JEOC) && ((tmp_ier & ADC_IT_JEOC) == ADC_IT_JEOC)) || + (((tmp_isr & ADC_FLAG_JEOS) == ADC_FLAG_JEOS) && ((tmp_ier & ADC_IT_JEOS) == ADC_IT_JEOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + } + + /* Retrieve ADC configuration */ + tmp_adc_inj_is_trigger_source_sw_start = LL_ADC_INJ_IsTriggerSourceSWStart(hadc->Instance); + tmp_adc_reg_is_trigger_source_sw_start = LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance); + /* Get relevant register CFGR in ADC instance of ADC master or slave */ + /* in function of multimode state (for devices with multimode */ + /* available). */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_INTERL) + ) + { + tmp_cfgr = READ_REG(hadc->Instance->CFGR); + } + else + { + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + tmp_cfgr = READ_REG(tmpADC_Master->CFGR); + } +#else + tmp_cfgr = READ_REG(hadc->Instance->CFGR); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Disable interruption if no further conversion upcoming by injected */ + /* external trigger or by automatic injected conversion with regular */ + /* group having no further conversion upcoming (same conditions as */ + /* regular group interruption disabling above), */ + /* and if injected scan sequence is completed. */ + if (tmp_adc_inj_is_trigger_source_sw_start != 0UL) + { + if ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) || + ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && + (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL))) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) + { + /* Particular case if injected contexts queue is enabled: */ + /* when the last context has been fully processed, JSQR is reset */ + /* by the hardware. Even if no injected conversion is planned to come */ + /* (queue empty, triggers are ignored), it can start again */ + /* immediately after setting a new context (JADSTART is still set). */ + /* Therefore, state of HAL ADC injected group is kept to busy. */ + if (READ_BIT(tmp_cfgr, ADC_CFGR_JQM) == 0UL) + { + /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */ + /* JADSTART==0 (no conversion on going) */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of sequence conversion interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC | ADC_IT_JEOS); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + } + } + + /* Injected Conversion complete callback */ + /* Note: HAL_ADCEx_InjectedConvCpltCallback can resort to + if (__HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_JEOS)) or + if (__HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_JEOC)) to determine whether + interruption has been triggered by end of conversion or end of + sequence. */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->InjectedConvCpltCallback(hadc); +#else + HAL_ADCEx_InjectedConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear injected group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC | ADC_FLAG_JEOS); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + } + + /* ========== Check analog watchdog 2 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD2) == ADC_FLAG_AWD2) && ((tmp_ier & ADC_IT_AWD2) == ADC_IT_AWD2)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Level out of window 2 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow2Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow2Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + } + + /* ========== Check analog watchdog 3 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD3) == ADC_FLAG_AWD3) && ((tmp_ier & ADC_IT_AWD3) == ADC_IT_AWD3)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Level out of window 3 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow3Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow3Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + } + + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_FLAG_OVR) == ADC_FLAG_OVR) && ((tmp_ier & ADC_IT_OVR) == ADC_IT_OVR)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ +#if defined(ADC_MULTIMODE_SUPPORT) + if (tmp_multimode_config != LL_ADC_MULTI_INDEPENDENT) + { + /* Multimode (when feature is available) is enabled, + Common Control Register MDMA bits must be checked. */ + if (LL_ADC_GetMultiDMATransfer(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) != LL_ADC_MULTI_REG_DMA_EACH_ADC) + { + overrun_error = 1UL; + } + } + else +#endif /* ADC_MULTIMODE_SUPPORT */ + { + /* Multimode not set or feature not available or ADC independent */ + if ((hadc->Instance->CFGR & ADC_CFGR_DMAEN) != 0UL) + { + overrun_error = 1UL; + } + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + + /* ========== Check Injected context queue overflow flag ========== */ + if (((tmp_isr & ADC_FLAG_JQOVF) == ADC_FLAG_JQOVF) && ((tmp_ier & ADC_IT_JQOVF) == ADC_IT_JQOVF)) + { + /* Change ADC state to overrun state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF); + + /* Set ADC error code to Injected context queue overflow */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); + + /* Clear the Injected context queue overflow flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JQOVF); + + /* Injected context queue overflow callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->InjectedQueueOverflowCallback(hadc); +#else + HAL_ADCEx_InjectedQueueOverflowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 1 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group regular. + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into ADC group regular, + * following calls to this function can be used to reconfigure + * some parameters of structure "ADC_ChannelConfTypeDef" on the fly, + * without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_ChannelConfTypeDef". + * @param hadc ADC handle + * @param pConfig Structure of ADC channel assigned to ADC group regular. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *pConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpOffsetShifted; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_REGULAR_RANK(pConfig->Rank)); + assert_param(IS_ADC_SAMPLE_TIME(pConfig->SamplingTime)); + assert_param(IS_ADC_SINGLE_DIFFERENTIAL(pConfig->SingleDiff)); + assert_param(IS_ADC_OFFSET_NUMBER(pConfig->OffsetNumber)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pConfig->Offset)); + + /* if ROVSE is set, the value of the OFFSETy_EN bit in ADCx_OFRy register is + ignored (considered as reset) */ + assert_param(!((pConfig->OffsetNumber != ADC_OFFSET_NONE) && (hadc->Init.OversamplingMode == ENABLE))); + + /* Verification of channel number */ + if (pConfig->SingleDiff != ADC_DIFFERENTIAL_ENDED) + { + assert_param(IS_ADC_CHANNEL(hadc, pConfig->Channel)); + } + else + { + assert_param(IS_ADC_DIFF_CHANNEL(hadc, pConfig->Channel)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel rank */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Set ADC group regular sequence: channel on the selected scan sequence rank */ + LL_ADC_REG_SetSequencerRanks(hadc->Instance, pConfig->Rank, pConfig->Channel); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel sampling time */ + /* - Channel offset */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + /* Manage specific case of sampling time 3.5 cycles replacing 2.5 cyles */ + if (pConfig->SamplingTime == ADC_SAMPLETIME_3CYCLES_5) + { + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, LL_ADC_SAMPLINGTIME_2CYCLES_5); + + /* Set ADC sampling time common configuration */ + LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5); + } + else + { + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, pConfig->SamplingTime); + + /* Set ADC sampling time common configuration */ + LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_DEFAULT); + } + + /* Configure the offset: offset enable/disable, channel, offset value */ + + /* Shift the offset with respect to the selected ADC resolution. */ + /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */ + tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, (uint32_t)pConfig->Offset); + + if (pConfig->OffsetNumber != ADC_OFFSET_NONE) + { + /* Set ADC selected offset number */ + LL_ADC_SetOffset(hadc->Instance, pConfig->OffsetNumber, pConfig->Channel, tmpOffsetShifted); + + assert_param(IS_ADC_OFFSET_SIGN(pConfig->OffsetSign)); + assert_param(IS_FUNCTIONAL_STATE(pConfig->OffsetSaturation)); + /* Set ADC selected offset sign & saturation */ + LL_ADC_SetOffsetSign(hadc->Instance, pConfig->OffsetNumber, pConfig->OffsetSign); + LL_ADC_SetOffsetSaturation(hadc->Instance, pConfig->OffsetNumber, + (pConfig->OffsetSaturation == ENABLE) ? + LL_ADC_OFFSET_SATURATION_ENABLE : LL_ADC_OFFSET_SATURATION_DISABLE); + } + else + { + /* Scan each offset register to check if the selected channel is targeted. */ + /* If this is the case, the corresponding offset number is disabled. */ + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE); + } + } + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Single or differential mode */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set mode single-ended or differential input of the selected ADC channel */ + LL_ADC_SetChannelSingleDiff(hadc->Instance, pConfig->Channel, pConfig->SingleDiff); + + /* Configuration of differential mode */ + if (pConfig->SingleDiff == ADC_DIFFERENTIAL_ENDED) + { + /* Set sampling time of the selected ADC channel */ + /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, + (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL( + (__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)pConfig->Channel) + + 1UL) & 0x1FUL)), + pConfig->SamplingTime); + } + + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit(). */ + + if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((pConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + if (ADC_TEMPERATURE_SENSOR_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + } + else if ((pConfig->Channel == ADC_CHANNEL_VBAT) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + if (ADC_BATTERY_VOLTAGE_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + } + else if ((pConfig->Channel == ADC_CHANNEL_VREFINT) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + if (ADC_VREFINT_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + } + else if (pConfig->Channel == ADC_CHANNEL_VDDCORE) + { + if (ADC_VDDCORE_INSTANCE(hadc)) + { + LL_ADC_SetPathInternalChAdd(hadc->Instance, LL_ADC_PATH_INTERNAL_VDDCORE); + } + } + else + { + /* nothing to do */ + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configure the analog watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the selected analog watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without resetting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_AnalogWDGConfTypeDef". + * @note On this STM32 series, analog watchdog thresholds can be modified + * while ADC conversion is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc ADC handle + * @param pAnalogWDGConfig Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, const ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_awd_high_threshold_shifted; + uint32_t tmp_awd_low_threshold_shifted; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(pAnalogWDGConfig->WatchdogNumber)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(pAnalogWDGConfig->WatchdogMode)); + assert_param(IS_ADC_ANALOG_WATCHDOG_FILTERING_MODE(pAnalogWDGConfig->FilteringConfig)); + assert_param(IS_FUNCTIONAL_STATE(pAnalogWDGConfig->ITMode)); + + if ((pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || + (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || + (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)) + { + assert_param(IS_ADC_CHANNEL(hadc, pAnalogWDGConfig->Channel)); + } + + /* Verify thresholds range */ + if (hadc->Init.OversamplingMode == ENABLE) + { + /* Case of oversampling enabled: depending on ratio and shift configuration, + analog watchdog thresholds can be higher than ADC resolution. + Verify if thresholds are within maximum thresholds range. */ + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->LowThreshold)); + } + else + { + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->LowThreshold)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on ADC groups regular and injected: */ + /* - Analog watchdog channels */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + /* Analog watchdog configuration */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: one or overall group of */ + /* channels, on groups regular and-or injected. */ + switch (pAnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel, + LL_ADC_GROUP_REGULAR)); + break; + + case ADC_ANALOGWATCHDOG_SINGLE_INJEC: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel, + LL_ADC_GROUP_INJECTED)); + break; + + case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel, + LL_ADC_GROUP_REGULAR_INJECTED)); + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + case ADC_ANALOGWATCHDOG_ALL_INJEC: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_INJ); + break; + + case ADC_ANALOGWATCHDOG_ALL_REGINJEC: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG_INJ); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); + break; + } + + /* Set the filtering configuration */ + MODIFY_REG(hadc->Instance->TR1, + ADC_TR1_AWDFILT, + pAnalogWDGConfig->FilteringConfig); + + /* Update state, clear previous result related to AWD1 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD1(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD1(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD1(hadc->Instance); + } + } + /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ + else + { + switch (pAnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + case ADC_ANALOGWATCHDOG_SINGLE_INJEC: + case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC: + /* Update AWD by bitfield to keep the possibility to monitor */ + /* several channels by successive calls of this function. */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + SET_BIT(hadc->Instance->AWD2CR, + (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel) & 0x1FUL))); + } + else + { + SET_BIT(hadc->Instance->AWD3CR, + (1UL << (__LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel) & 0x1FUL))); + } + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + case ADC_ANALOGWATCHDOG_ALL_INJEC: + case ADC_ANALOGWATCHDOG_ALL_REGINJEC: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, + pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG_INJ); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE); + break; + } + + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + /* Update state, clear previous result related to AWD2 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD2(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD2(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD2(hadc->Instance); + } + } + /* (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */ + else + { + /* Update state, clear previous result related to AWD3 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD3(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (pAnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD3(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD3(hadc->Instance); + } + } + } + + } + + /* Analog watchdog thresholds configuration */ + if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmp_awd_high_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold); + tmp_awd_low_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold); + } + /* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */ + else + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 7, the LSB (right bits) */ + /* are set to 0. */ + tmp_awd_high_threshold_shifted = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold); + tmp_awd_low_threshold_shifted = ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold); + } + + /* Set ADC analog watchdog thresholds value of both thresholds high and low */ + LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, tmp_awd_high_threshold_shifted, + tmp_awd_low_threshold_shifted); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @param hadc ADC handle + * @param ConversionGroup ADC group regular and/or injected. + * This parameter can be one of the following values: + * @arg @ref ADC_REGULAR_GROUP ADC regular conversion type. + * @arg @ref ADC_INJECTED_GROUP ADC injected conversion type. + * @arg @ref ADC_REGULAR_INJECTED_GROUP ADC regular and injected conversion type. + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t ConversionGroup) +{ + uint32_t tickstart; + uint32_t Conversion_Timeout_CPU_cycles = 0UL; + uint32_t conversion_group_reassigned = ConversionGroup; + uint32_t tmp_ADC_CR_ADSTART_JADSTART; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CONVERSION_GROUP(ConversionGroup)); + + /* Verification if ADC is not already stopped (on regular and injected */ + /* groups) to bypass this function if not needed. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + if ((tmp_adc_is_conversion_on_going_regular != 0UL) + || (tmp_adc_is_conversion_on_going_injected != 0UL) + ) + { + /* Particular case of continuous auto-injection mode combined with */ + /* auto-delay mode. */ + /* In auto-injection mode, regular group stop ADC_CR_ADSTP is used (not */ + /* injected group stop ADC_CR_JADSTP). */ + /* Procedure to be followed: Wait until JEOS=1, clear JEOS, set ADSTP=1 */ + /* (see reference manual). */ + if (((hadc->Instance->CFGR & ADC_CFGR_JAUTO) != 0UL) + && (hadc->Init.ContinuousConvMode == ENABLE) + && (hadc->Init.LowPowerAutoWait == ENABLE) + ) + { + /* Use stop of regular group */ + conversion_group_reassigned = ADC_REGULAR_GROUP; + + /* Wait until JEOS=1 (maximum Timeout: 4 injected conversions) */ + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS) == 0UL) + { + if (Conversion_Timeout_CPU_cycles >= (ADC_CONVERSION_TIME_MAX_CPU_CYCLES * 4UL)) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + Conversion_Timeout_CPU_cycles ++; + } + + /* Clear JEOS */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOS); + } + + /* Stop potential conversion on going on ADC group regular */ + if (conversion_group_reassigned != ADC_INJECTED_GROUP) + { + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + } + } + + /* Stop potential conversion on going on ADC group injected */ + if (conversion_group_reassigned != ADC_REGULAR_GROUP) + { + /* Software is allowed to set JADSTP only when JADSTART=1 and ADDIS=0 */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) != 0UL) + { + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group injected conversion */ + LL_ADC_INJ_StopConversion(hadc->Instance); + } + } + } + + /* Selection of start and stop bits with respect to the regular or injected group */ + switch (conversion_group_reassigned) + { + case ADC_REGULAR_INJECTED_GROUP: + tmp_ADC_CR_ADSTART_JADSTART = (ADC_CR_ADSTART | ADC_CR_JADSTART); + break; + case ADC_INJECTED_GROUP: + tmp_ADC_CR_ADSTART_JADSTART = ADC_CR_JADSTART; + break; + /* Case ADC_REGULAR_GROUP only*/ + default: + tmp_ADC_CR_ADSTART_JADSTART = ADC_CR_ADSTART; + break; + } + + /* Wait for conversion effectively stopped */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Check if conditions to enable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + + if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) + & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL) + { + /* Delay for temperature sensor buffer stabilization time */ + /* Note: Value LL_ADC_DELAY_TEMPSENSOR_STAB_US used instead of */ + /* LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US because needed */ + /* in case of ADC enable after a system wake up */ + /* from low power mode. */ + + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); + + /* Verification if ADC is not already disabled: */ + /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ + /* disabled. */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_disable_on_going == 0UL) + ) + { + /* Check if conditions to disable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Wait for ADC effectively disabled */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + /* Is it the end of the regular sequence ? */ + if ((hadc->Instance->ISR & ADC_FLAG_EOS) != 0UL) + { + /* Are conversions software-triggered ? */ + if (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + { + /* Is CONT bit set ? */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_CONT) == 0UL) + { + /* CONT bit is not set, no more conversions expected */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + } + } + else + { + /* DMA End of Transfer interrupt was triggered but conversions sequence + is not over. If DMACFG is set to 0, conversions are stopped. */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMACFG) == 0UL) + { + /* DMACFG bit is not set, conversions are stopped. */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc_ex.c new file mode 100644 index 000000000..5d2c39d89 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_adc_ex.c @@ -0,0 +1,2447 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Peripheral Control functions + * Other functions (generic functions) are available in file + * "stm32h7rsxx_hal_adc.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32h7rsxx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extended HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants + * @{ + */ + +#define ADC_JSQR_FIELDS ((ADC_JSQR_JL | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN |\ + ADC_JSQR_JSQ1 | ADC_JSQR_JSQ2 |\ + ADC_JSQR_JSQ3 | ADC_JSQR_JSQ4 )) /*!< ADC_JSQR fields of parameters that can + be updated anytime once the ADC is enabled */ + +/* Fixed timeout value for ADC calibration. */ +/* Fixed timeout value for ADC calibration. */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescalers. */ +/* Ex of profile low frequency : f_ADC at 0.125 Mhz (minimum value */ +/* according to Data sheet), calibration_time MAX = 165010 / f_ADC */ +/* 165010 / 125000 = 1.32s */ +/* At maximum CPU speed (480 MHz), this means */ +/* 1.32 * 480 MHz = 633600000 CPU cycles */ +#define ADC_CALIBRATION_TIMEOUT (633600000UL) /*!< ADC calibration time-out value */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Perform the ADC self-calibration for single or differential ending. + (+) Get calibration factors for single or differential ending. + (+) Set calibration factors for single or differential ending. + + (+) Start conversion of ADC group injected. + (+) Stop conversion of ADC group injected. + (+) Poll for conversion complete on ADC group injected. + (+) Get result of ADC group injected channel conversion. + (+) Start conversion of ADC group injected and enable interruptions. + (+) Stop conversion of ADC group injected and disable interruptions. + + (+) When multimode feature is available, start multimode and enable DMA transfer. + (+) Stop multimode and disable ADC DMA transfer. + (+) Get result of multimode conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * @param hadc ADC handle + * @param SingleDiff Selection of single-ended or differential input + * This parameter can be one of the following values: + * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff) +{ + HAL_StatusTypeDef tmp_hal_status; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Calibration prerequisite: ADC must be disabled. */ + + /* Disable the ADC (if not already disabled) */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Start ADC calibration in mode single-ended or differential */ + LL_ADC_StartCalibration(hadc->Instance, SingleDiff); + + /* Wait for calibration completion */ + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + { + wait_loop_index++; + if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Note: No need to update variable "tmp_hal_status" here: already set */ + /* to state "HAL_ERROR" by function disabling the ADC. */ + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get the calibration factor. + * @param hadc ADC handle. + * @param SingleDiff This parameter can be only: + * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @retval Calibration value. + */ +uint32_t HAL_ADCEx_Calibration_GetValue(const ADC_HandleTypeDef *hadc, uint32_t SingleDiff) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff)); + + /* Return the selected ADC calibration value */ + return LL_ADC_GetCalibrationFactor(hadc->Instance, SingleDiff); +} + +/** + * @brief Set the calibration factor to overwrite automatic conversion result. + * ADC must be enabled and no conversion is ongoing. + * @param hadc ADC handle + * @param SingleDiff This parameter can be only: + * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) + * @retval HAL state + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, + uint32_t CalibrationFactor) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff)); + assert_param(IS_ADC_CALFACT(CalibrationFactor)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Verification of hardware constraints before modifying the calibration */ + /* factors register: ADC must be enabled, no conversion on going. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + /* Set the selected ADC calibration value */ + LL_ADC_SetCalibrationFactor(hadc->Instance, SingleDiff, CalibrationFactor); + } + else + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + /* Update ADC error code */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Update ADC state machine to error */ + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of injected group. + * @note Interruptions enabled in this function: None. + * @note Case of multimode enabled when multimode feature is available: + * HAL_ADCEx_InjectedStart() API must be called for ADC slave first, + * then for ADC master. + * For ADC slave, ADC is enabled only (conversion is not started). + * For ADC master, ADC is enabled and multimode conversion is started. + * @param hadc ADC handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tmp_config_injected_queue; +#if defined(ADC_MULTIMODE_SUPPORT) + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) != 0UL) + { + return HAL_BUSY; + } + else + { + /* In case of software trigger detection enabled, JQDIS must be set + (which can be done only if ADSTART and JADSTART are both cleared). + If JQDIS is not set at that point, returns an error + - since software trigger detection is disabled. User needs to + resort to HAL_ADCEx_DisableInjectedQueue() API to set JQDIS. + - or (if JQDIS is intentionally reset) since JEXTEN = 0 which means + the queue is empty */ + tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); + + if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) + && (tmp_config_injected_queue == 0UL) + ) + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Check if a regular conversion is ongoing */ + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) != 0UL) + { + /* Reset ADC error code field related to injected conversions only */ + CLEAR_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); + } + else + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Reset HAL_ADC_STATE_MULTIMODE_SLAVE bit + - if ADC instance is master or if multimode feature is not available + - if multimode setting is disabled (ADC instance slave in independent mode) */ + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + ) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Clear ADC group injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of injected group, if automatic injected conversion */ + /* is disabled. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled (when multimode feature is available): */ + /* if ADC is slave, */ + /* - ADC is enabled only (conversion is not started), */ + /* - if multimode only concerns regular conversion, ADC is enabled */ + /* and conversion is started. */ + /* If ADC is master or independent, */ + /* - ADC is enabled and conversion is started. */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_INTERL) + ) + { + /* ADC instance is not a multimode slave instance with multimode injected conversions enabled */ + if (LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT) + { + LL_ADC_INJ_StartConversion(hadc->Instance); + } + } + else + { + /* ADC instance is not a multimode slave instance with multimode injected conversions enabled */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#else + if (LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT) + { + /* Start ADC group injected conversion */ + LL_ADC_INJ_StartConversion(hadc->Instance); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; + } +} + +/** + * @brief Stop conversion of injected channels. Disable ADC peripheral if + * no regular conversion is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @note In case of multimode enabled (when multimode feature is available), + * HAL_ADCEx_InjectedStop() must be called for ADC master first, then for ADC slave. + * For ADC master, conversion is stopped and ADC is disabled. + * For ADC slave, ADC is disabled only (conversion stop of ADC master + * has already stopped conversion of ADC slave). + * @param hadc ADC handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going on injected group only. */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_INJECTED_GROUP); + + /* Disable ADC peripheral if injected conversions are effectively stopped */ + /* and if no conversion on regular group is on-going */ + if (tmp_hal_status == HAL_OK) + { + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + /* Conversion on injected group is stopped, but ADC not disabled since */ + /* conversion on regular group is still running. */ + else + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for injected group conversion to be completed. + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @note Depending on hadc->Init.EOCSelection, JEOS or JEOC is + * checked and cleared depending on AUTDLY bit status. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_flag_end; + uint32_t tmp_adc_inj_is_trigger_source_sw_start; + uint32_t tmp_adc_reg_is_trigger_source_sw_start; + uint32_t tmp_cfgr; +#if defined(ADC_MULTIMODE_SUPPORT) + const ADC_TypeDef *tmpADC_Master; + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of sequence selected */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_flag_end = ADC_FLAG_JEOS; + } + else /* end of conversion selected */ + { + tmp_flag_end = ADC_FLAG_JEOC; + } + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait until End of Conversion or Sequence flag is raised */ + while ((hadc->Instance->ISR & tmp_flag_end) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->ISR & tmp_flag_end) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + } + + /* Retrieve ADC configuration */ + tmp_adc_inj_is_trigger_source_sw_start = LL_ADC_INJ_IsTriggerSourceSWStart(hadc->Instance); + tmp_adc_reg_is_trigger_source_sw_start = LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance); + /* Get relevant register CFGR in ADC instance of ADC master or slave */ + /* in function of multimode state (for devices with multimode */ + /* available). */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_INTERL) + ) + { + tmp_cfgr = READ_REG(hadc->Instance->CFGR); + } + else + { + tmpADC_Master = __LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance); + tmp_cfgr = READ_REG(tmpADC_Master->CFGR); + } +#else + tmp_cfgr = READ_REG(hadc->Instance->CFGR); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC); + + /* Determine whether any further conversion upcoming on group injected */ + /* by external trigger or by automatic injected conversion */ + /* from group regular. */ + if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || + ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && + ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && + (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL)))) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) + { + /* Particular case if injected contexts queue is enabled: */ + /* when the last context has been fully processed, JSQR is reset */ + /* by the hardware. Even if no injected conversion is planned to come */ + /* (queue empty, triggers are ignored), it can start again */ + /* immediately after setting a new context (JADSTART is still set). */ + /* Therefore, state of HAL ADC injected group is kept to busy. */ + if (READ_BIT(tmp_cfgr, ADC_CFGR_JQM) == 0UL) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + } + } + + /* Clear polled flag */ + if (tmp_flag_end == ADC_FLAG_JEOS) + { + /* Clear end of sequence JEOS flag of injected group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature. */ + /* For injected groups, no new conversion will start before JEOS is */ + /* cleared. */ + if (READ_BIT(tmp_cfgr, ADC_CFGR_AUTDLY) == 0UL) + { + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS)); + } + } + else + { + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC); + } + + /* Return API HAL status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of injected group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : JEOC (end of conversion) or JEOS (end of sequence) + * @note Case of multimode enabled (when multimode feature is enabled): + * HAL_ADCEx_InjectedStart_IT() API must be called for ADC slave first, + * then for ADC master. + * For ADC slave, ADC is enabled only (conversion is not started). + * For ADC master, ADC is enabled and multimode conversion is started. + * @param hadc ADC handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tmp_config_injected_queue; +#if defined(ADC_MULTIMODE_SUPPORT) + uint32_t tmp_multimode_config = LL_ADC_GetMultimode(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) != 0UL) + { + return HAL_BUSY; + } + else + { + /* In case of software trigger detection enabled, JQDIS must be set + (which can be done only if ADSTART and JADSTART are both cleared). + If JQDIS is not set at that point, returns an error + - since software trigger detection is disabled. User needs to + resort to HAL_ADCEx_DisableInjectedQueue() API to set JQDIS. + - or (if JQDIS is intentionally reset) since JEXTEN = 0 which means + the queue is empty */ + tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); + + if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) + && (tmp_config_injected_queue == 0UL) + ) + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Check if a regular conversion is ongoing */ + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) != 0UL) + { + /* Reset ADC error code field related to injected conversions only */ + CLEAR_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); + } + else + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Set ADC state */ + /* - Clear state bitfield related to injected group conversion results */ + /* - Set state bitfield related to injected operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC, + HAL_ADC_STATE_INJ_BUSY); + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Reset HAL_ADC_STATE_MULTIMODE_SLAVE bit + - if ADC instance is master or if multimode feature is not available + - if multimode setting is disabled (ADC instance slave in independent mode) */ + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + ) + { + CLEAR_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Clear ADC group injected group conversion flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JEOC | ADC_FLAG_JEOS)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC Injected context queue overflow interrupt if this feature */ + /* is enabled. */ + if ((hadc->Instance->CFGR & ADC_CFGR_JQM) != 0UL) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_FLAG_JQOVF); + } + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOS); + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC); + break; + } + + /* Enable conversion of injected group, if automatic injected conversion */ + /* is disabled. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Case of multimode enabled (when multimode feature is available): */ + /* if ADC is slave, */ + /* - ADC is enabled only (conversion is not started), */ + /* - if multimode only concerns regular conversion, ADC is enabled */ + /* and conversion is started. */ + /* If ADC is master or independent, */ + /* - ADC is enabled and conversion is started. */ +#if defined(ADC_MULTIMODE_SUPPORT) + if ((__LL_ADC_MULTI_INSTANCE_MASTER(hadc->Instance) == hadc->Instance) + || (tmp_multimode_config == LL_ADC_MULTI_INDEPENDENT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_SIMULT) + || (tmp_multimode_config == LL_ADC_MULTI_DUAL_REG_INTERL) + ) + { + /* ADC instance is not a multimode slave instance with multimode injected conversions enabled */ + if (LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT) + { + LL_ADC_INJ_StartConversion(hadc->Instance); + } + } + else + { + /* ADC instance is not a multimode slave instance with multimode injected conversions enabled */ + SET_BIT(hadc->State, HAL_ADC_STATE_MULTIMODE_SLAVE); + } +#else + if (LL_ADC_INJ_GetTrigAuto(hadc->Instance) == LL_ADC_INJ_TRIG_INDEPENDENT) + { + /* Start ADC group injected conversion */ + LL_ADC_INJ_StartConversion(hadc->Instance); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; + } +} + +/** + * @brief Stop conversion of injected channels, disable interruption of + * end-of-conversion. Disable ADC peripheral if no regular conversion + * is on going. + * @note If ADC must be disabled and if conversion is on going on + * regular group, function HAL_ADC_Stop must be used to stop both + * injected and regular groups, and disable the ADC. + * @note If injected group mode auto-injection is enabled, + * function HAL_ADC_Stop must be used. + * @note Case of multimode enabled (when multimode feature is available): + * HAL_ADCEx_InjectedStop_IT() API must be called for ADC master first, + * then for ADC slave. + * For ADC master, conversion is stopped and ADC is disabled. + * For ADC slave, ADC is disabled only (conversion stop of ADC master + * has already stopped conversion of ADC slave). + * @note In case of auto-injection mode, HAL_ADC_Stop() must be used. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going on injected group only. */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_INJECTED_GROUP); + + /* Disable ADC peripheral if injected conversions are effectively stopped */ + /* and if no conversion on the other group (regular group) is intended to */ + /* continue. */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for injected channels */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_JEOC | ADC_IT_JEOS | ADC_FLAG_JQOVF)); + + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + /* Conversion on injected group is stopped, but ADC not disabled since */ + /* conversion on regular group is still running. */ + else + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Enable ADC, start MultiMode conversion and transfer regular results through DMA. + * @note Multimode must have been previously configured using + * HAL_ADCEx_MultiModeConfigChannel() function. + * Interruptions enabled in this function: + * overrun, DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @note State field of Slave ADC handle is not updated in this configuration: + * user should not rely on it for information related to Slave regular + * conversions. + * @param hadc ADC handle of ADC master (handle of ADC slave must not be used) + * @param pData Destination Buffer address. + * @param Length Length of data to be transferred from ADC peripheral to memory (in bytes). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + ADC_HandleTypeDef tmp_hadc_slave; + ADC_Common_TypeDef *tmpADC_Common; + uint32_t length_bytes; + DMA_NodeConfTypeDef node_conf; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + return HAL_BUSY; + } + else + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Temporary handle minimum initialization */ + __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave); + ADC_CLEAR_ERRORCODE(&tmp_hadc_slave); + + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave); + + if (tmp_hadc_slave.Instance == NULL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Enable the ADC peripherals: master and slave (in case if not already */ + /* enabled previously) */ + tmp_hal_status = ADC_Enable(hadc); + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Enable(&tmp_hadc_slave); + } + + /* Start multimode conversion of ADCs pair */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + (HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP), + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError ; + + /* Pointer to the common control register */ + tmpADC_Common = __LL_ADC_COMMON_INSTANCE(hadc->Instance); + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Check linkedlist mode */ + if ((hadc->DMA_Handle->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hadc->DMA_Handle->LinkedListQueue != NULL) && (hadc->DMA_Handle->LinkedListQueue->Head != NULL)) + { + /* Length should be converted to number of bytes */ + if (HAL_DMAEx_List_GetNodeConfig(&node_conf, hadc->DMA_Handle->LinkedListQueue->Head) != HAL_OK) + { + return HAL_ERROR; + } + + /* Length should be converted to number of bytes */ + if (node_conf.Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + /* Word -> Bytes */ + length_bytes = Length * 4U; + } + else if (node_conf.Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + /* Halfword -> Bytes */ + length_bytes = Length * 2U; + } + else /* Bytes */ + { + /* Same size already expressed in Bytes */ + length_bytes = Length; + } + + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = (uint32_t)length_bytes; + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = \ + (uint32_t)&tmpADC_Common->CDR; + hadc->DMA_Handle->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + tmp_hal_status = HAL_DMAEx_List_Start_IT(hadc->DMA_Handle); + } + else + { + return HAL_ERROR; + } + } + else + { + /* Length should be converted to number of bytes */ + if (hadc->DMA_Handle->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + /* Word -> Bytes */ + length_bytes = Length * 4U; + } + else if (hadc->DMA_Handle->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + /* Halfword -> Bytes */ + length_bytes = Length * 2U; + } + else /* Bytes */ + { + /* Same size already expressed in Bytes */ + length_bytes = Length; + } + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&tmpADC_Common->CDR, (uint32_t)pData, \ + length_bytes); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; + } +} + +/** + * @brief Stop multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral. + * @note Multimode is kept enabled after this function. MultiMode DMA bits + * (MDMA and DMACFG bits of common CCR register) are maintained. To disable + * Multimode (set with HAL_ADCEx_MultiModeConfigChannel()), ADC must be + * reinitialized using HAL_ADC_Init() or HAL_ADC_DeInit(), or the user can + * resort to HAL_ADCEx_DisableMultiMode() API. + * @note In case of DMA configured in circular mode, function + * HAL_ADC_Stop_DMA() must be called after this function with handle of + * ADC slave, to properly disable the DMA channel. + * @param hadc ADC handle of ADC master (handle of ADC slave must not be used) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tickstart; + ADC_HandleTypeDef tmp_hadc_slave; + uint32_t tmp_hadc_slave_conversion_on_going; + HAL_StatusTypeDef tmp_hadc_slave_disable_status; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential multimode conversion on going, on regular and injected groups */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Temporary handle minimum initialization */ + __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave); + ADC_CLEAR_ERRORCODE(&tmp_hadc_slave); + + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave); + + if (tmp_hadc_slave.Instance == NULL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Procedure to disable the ADC peripheral: wait for conversions */ + /* effectively stopped (ADC master and ADC slave), then disable ADC */ + + /* 1. Wait for ADC conversion completion for ADC master and ADC slave */ + tickstart = HAL_GetTick(); + + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + while ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL) + || (tmp_hadc_slave_conversion_on_going == 1UL) + ) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL) + || (tmp_hadc_slave_conversion_on_going == 1UL) + ) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + } + + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + /* Note: DMA channel of ADC slave should be stopped after this function */ + /* with HAL_ADC_Stop_DMA() API. */ + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status == HAL_ERROR) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripherals: master and slave */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, to keep in */ + /* memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hadc_slave_disable_status = ADC_Disable(&tmp_hadc_slave); + if ((ADC_Disable(hadc) == HAL_OK) && + (tmp_hadc_slave_disable_status == HAL_OK)) + { + tmp_hal_status = HAL_OK; + } + } + else + { + /* In case of error, attempt to disable ADC master and slave without status assert */ + (void) ADC_Disable(hadc); + (void) ADC_Disable(&tmp_hadc_slave); + } + + /* Set ADC state (ADC master) */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Return the last ADC Master and Slave regular conversions results when in multimode configuration. + * @param hadc ADC handle of ADC Master (handle of ADC Slave must not be used) + * @retval The converted data values. + */ +uint32_t HAL_ADCEx_MultiModeGetValue(const ADC_HandleTypeDef *hadc) +{ + const ADC_Common_TypeDef *tmpADC_Common; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + /* and possible no usage in __LL_ADC_COMMON_INSTANCE() below */ + UNUSED(hadc); + + /* Pointer to the common control register */ + tmpADC_Common = __LL_ADC_COMMON_INSTANCE(hadc->Instance); + + /* Return the multi mode conversion value */ + return tmpADC_Common->CDR; +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Get ADC injected group conversion result. + * @note Reading register JDRx automatically clears ADC flag JEOC + * (ADC group injected end of unitary conversion). + * @note This function does not clear ADC flag JEOS + * (ADC group injected end of sequence conversion) + * Occurrence of flag JEOS rising: + * - If sequencer is composed of 1 rank, flag JEOS is equivalent + * to flag JEOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag JEOC only is raised, at the end of the scan sequence + * both flags JEOC and EOS are raised. + * Flag JEOS must not be cleared by this function because + * it would not be compliant with low power features + * (feature low power auto-wait, not available on all STM32 series). + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADCEx_InjectedPollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_JEOS). + * @param hadc ADC handle + * @param InjectedRank the converted ADC injected rank. + * This parameter can be one of the following values: + * @arg @ref ADC_INJECTED_RANK_1 ADC group injected rank 1 + * @arg @ref ADC_INJECTED_RANK_2 ADC group injected rank 2 + * @arg @ref ADC_INJECTED_RANK_3 ADC group injected rank 3 + * @arg @ref ADC_INJECTED_RANK_4 ADC group injected rank 4 + * @retval ADC group injected conversion data + */ +uint32_t HAL_ADCEx_InjectedGetValue(const ADC_HandleTypeDef *hadc, uint32_t InjectedRank) +{ + uint32_t tmp_jdr; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_INJECTED_RANK(InjectedRank)); + + /* Get ADC converted value */ + switch (InjectedRank) + { + case ADC_INJECTED_RANK_4: + tmp_jdr = hadc->Instance->JDR4; + break; + case ADC_INJECTED_RANK_3: + tmp_jdr = hadc->Instance->JDR3; + break; + case ADC_INJECTED_RANK_2: + tmp_jdr = hadc->Instance->JDR2; + break; + case ADC_INJECTED_RANK_1: + default: + tmp_jdr = hadc->Instance->JDR1; + break; + } + + /* Return ADC converted value */ + return tmp_jdr; +} + +/** + * @brief Injected conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_InjectedConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Injected context queue overflow callback. + * @note This callback is called if injected context queue is enabled + (parameter "QueueInjectedContext" in injected channel configuration) + and if a new injected context is set when queue is full (maximum 2 + contexts). + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_InjectedQueueOverflowCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 2 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 3 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file. + */ +} + + +/** + * @brief End Of Sampling callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file. + */ +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral if no + * conversion is on going on injected group. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); + + /* Disable ADC peripheral if regular conversions are effectively stopped + and if no injected conversions are on-going */ + if (tmp_hal_status == HAL_OK) + { + /* Clear HAL_ADC_STATE_REG_BUSY bit */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + /* Conversion on injected group is stopped, but ADC not disabled since */ + /* conversion on regular group is still running. */ + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Stop ADC conversion of ADC groups regular and injected, + * disable interrution of end-of-conversion, + * disable ADC peripheral if no conversion is on going + * on injected group. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped + and if no injected conversion is on-going */ + if (tmp_hal_status == HAL_OK) + { + /* Clear HAL_ADC_STATE_REG_BUSY bit */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + /* Disable all regular-related interrupts */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable ADC peripheral if no injected conversions are on-going */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + tmp_hal_status = ADC_Disable(hadc); + /* if no issue reported */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral if no conversion is on going + * on injected group. + * @note HAL_ADCEx_RegularStop_DMA() function is dedicated to single-ADC mode only. + * For multimode (when multimode feature is available), + * HAL_ADCEx_RegularMultiModeStop_DMA() API must be used. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped + and if no injected conversion is on-going */ + if (tmp_hal_status == HAL_OK) + { + /* Clear HAL_ADC_STATE_REG_BUSY bit */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + /* Disable ADC DMA (ADC DMA configuration ADC_CFGR_DMACFG is kept) */ + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN); + + /* Disable the DMA channel (in case of DMA in circular mode or stop while */ + /* while DMA transfer is on going) */ + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_INJ_BUSY, + HAL_ADC_STATE_READY); + } + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Stop DMA-based multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral if no injected + * conversion is on-going. + * @note Multimode is kept enabled after this function. Multimode DMA bits + * (MDMA and DMACFG bits of common CCR register) are maintained. To disable + * multimode (set with HAL_ADCEx_MultiModeConfigChannel()), ADC must be + * reinitialized using HAL_ADC_Init() or HAL_ADC_DeInit(), or the user can + * resort to HAL_ADCEx_DisableMultiMode() API. + * @note In case of DMA configured in circular mode, function + * HAL_ADCEx_RegularStop_DMA() must be called after this function with handle of + * ADC slave, to properly disable the DMA channel. + * @param hadc ADC handle of ADC master (handle of ADC slave must not be used) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tickstart; + ADC_HandleTypeDef tmp_hadc_slave; + uint32_t tmp_hadc_slave_conversion_on_going; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + + /* 1. Stop potential multimode conversion on going, on regular groups */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Clear HAL_ADC_STATE_REG_BUSY bit */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); + + /* Temporary handle minimum initialization */ + __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave); + ADC_CLEAR_ERRORCODE(&tmp_hadc_slave); + + /* Set a temporary handle of the ADC slave associated to the ADC master */ + ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave); + + if (tmp_hadc_slave.Instance == NULL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Procedure to disable the ADC peripheral: wait for conversions */ + /* effectively stopped (ADC master and ADC slave), then disable ADC */ + + /* 1. Wait for ADC conversion completion for ADC master and ADC slave */ + tickstart = HAL_GetTick(); + + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + while ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL) + || (tmp_hadc_slave_conversion_on_going == 1UL) + ) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL) + || (tmp_hadc_slave_conversion_on_going == 1UL) + ) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + } + + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + /* Note: DMA channel of ADC slave should be stopped after this function */ + /* with HAL_ADCEx_RegularStop_DMA() API. */ + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripherals: master and slave if no injected */ + /* conversion is on-going. */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, to keep in */ + /* memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + tmp_hal_status = ADC_Disable(hadc); + if (tmp_hal_status == HAL_OK) + { + if (LL_ADC_INJ_IsConversionOngoing((&tmp_hadc_slave)->Instance) == 0UL) + { + tmp_hal_status = ADC_Disable(&tmp_hadc_slave); + } + } + } + + if (tmp_hal_status == HAL_OK) + { + /* Both Master and Slave ADC's could be disabled. Update Master State */ + /* Clear HAL_ADC_STATE_INJ_BUSY bit, set HAL_ADC_STATE_READY bit */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY, HAL_ADC_STATE_READY); + } + else + { + /* injected (Master or Slave) conversions are still on-going, + no Master State change */ + } + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @defgroup ADCEx_Exported_Functions_Group2 ADC Extended Peripheral Control functions + * @brief ADC Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on injected group + (+) Configure multimode when multimode feature is available + (+) Enable or Disable Injected Queue + (+) Disable ADC voltage regulator + (+) Enter ADC deep-power-down mode + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group injected. + * @note Possibility to update parameters on the fly: + * This function initializes injected group, following calls to this + * function can be used to reconfigure some parameters of structure + * "ADC_InjectionConfTypeDef" on the fly, without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_InjectionConfTypeDef". + * @note In case of usage of internal measurement channels: + * Vbat/VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Caution: For Injected Context Queue use, a context must be fully + * defined before start of injected conversion. All channels are configured + * consecutively for the same ADC instance. Therefore, the number of calls to + * HAL_ADCEx_InjectedConfigChannel() must be equal to the value of parameter + * InjectedNbrOfConversion for each context. + * - Example 1: If 1 context is intended to be used (or if there is no use of the + * Injected Queue Context feature) and if the context contains 3 injected ranks + * (InjectedNbrOfConversion = 3), HAL_ADCEx_InjectedConfigChannel() must be + * called once for each channel (i.e. 3 times) before starting a conversion. + * This function must not be called to configure a 4th injected channel: + * it would start a new context into context queue. + * - Example 2: If 2 contexts are intended to be used and each of them contains + * 3 injected ranks (InjectedNbrOfConversion = 3), + * HAL_ADCEx_InjectedConfigChannel() must be called once for each channel and + * for each context (3 channels x 2 contexts = 6 calls). Conversion can + * start once the 1st context is set, that is after the first three + * HAL_ADCEx_InjectedConfigChannel() calls. The 2nd context can be set on the fly. + * @param hadc ADC handle + * @param pConfigInjected Structure of ADC injected group and ADC channel for + * injected group. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, + const ADC_InjectionConfTypeDef *pConfigInjected) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_offset_shifted; + uint32_t tmp_config_internal_channel; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + __IO uint32_t wait_loop_index = 0; + + uint32_t tmp_jsqr_context_queue_being_built = 0U; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_SAMPLE_TIME(pConfigInjected->InjectedSamplingTime)); + assert_param(IS_ADC_SINGLE_DIFFERENTIAL(pConfigInjected->InjectedSingleDiff)); + assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->AutoInjectedConv)); + assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->QueueInjectedContext)); + assert_param(IS_ADC_EXTTRIGINJEC_EDGE(pConfigInjected->ExternalTrigInjecConvEdge)); + assert_param(IS_ADC_EXTTRIGINJEC(pConfigInjected->ExternalTrigInjecConv)); + assert_param(IS_ADC_OFFSET_NUMBER(pConfigInjected->InjectedOffsetNumber)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pConfigInjected->InjectedOffset)); + assert_param(IS_ADC_OFFSET_SIGN(pConfigInjected->InjectedOffsetSign)); + assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->InjectedOffsetSaturation)); + assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->InjecOversamplingMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_ADC_INJECTED_RANK(pConfigInjected->InjectedRank)); + assert_param(IS_ADC_INJECTED_NB_CONV(pConfigInjected->InjectedNbrOfConversion)); + assert_param(IS_FUNCTIONAL_STATE(pConfigInjected->InjectedDiscontinuousConvMode)); + } + + + /* if JOVSE is set, the value of the OFFSETy_EN bit in ADCx_OFRy register is + ignored (considered as reset) */ + assert_param(!((pConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) + && (pConfigInjected->InjecOversamplingMode == ENABLE))); + + /* JDISCEN and JAUTO bits can't be set at the same time */ + assert_param(!((pConfigInjected->InjectedDiscontinuousConvMode == ENABLE) + && (pConfigInjected->AutoInjectedConv == ENABLE))); + + /* DISCEN and JAUTO bits can't be set at the same time */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (pConfigInjected->AutoInjectedConv == ENABLE))); + + /* Verification of channel number */ + if (pConfigInjected->InjectedSingleDiff != ADC_DIFFERENTIAL_ENDED) + { + assert_param(IS_ADC_CHANNEL(hadc, pConfigInjected->InjectedChannel)); + } + else + { + assert_param(IS_ADC_DIFF_CHANNEL(hadc, pConfigInjected->InjectedChannel)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Configuration of injected group sequencer: */ + /* Hardware constraint: Must fully define injected context register JSQR */ + /* before make it entering into injected sequencer queue. */ + /* */ + /* - if scan mode is disabled: */ + /* * Injected channels sequence length is set to 0x00: 1 channel */ + /* converted (channel on injected rank 1) */ + /* Parameter "InjectedNbrOfConversion" is discarded. */ + /* * Injected context register JSQR setting is simple: register is fully */ + /* defined on one call of this function (for injected rank 1) and can */ + /* be entered into queue directly. */ + /* - if scan mode is enabled: */ + /* * Injected channels sequence length is set to parameter */ + /* "InjectedNbrOfConversion". */ + /* * Injected context register JSQR setting more complex: register is */ + /* fully defined over successive calls of this function, for each */ + /* injected channel rank. It is entered into queue only when all */ + /* injected ranks have been set. */ + /* Note: Scan mode is not present by hardware on this device, but used */ + /* by software for alignment over all STM32 devices. */ + + if ((hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) || + (pConfigInjected->InjectedNbrOfConversion == 1U)) + { + /* Configuration of context register JSQR: */ + /* - number of ranks in injected group sequencer: fixed to 1st rank */ + /* (scan mode disabled, only rank 1 used) */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - channel set to rank 1 (scan mode disabled, only rank 1 can be used) */ + + if (pConfigInjected->InjectedRank == ADC_INJECTED_RANK_1) + { + /* Enable external trigger if trigger selection is different of */ + /* software start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigInjecConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (pConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) + { + tmp_jsqr_context_queue_being_built = (ADC_JSQR_RK(pConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1) + | (pConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) + | pConfigInjected->ExternalTrigInjecConvEdge + ); + } + else + { + tmp_jsqr_context_queue_being_built = (ADC_JSQR_RK(pConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1)); + } + + MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, tmp_jsqr_context_queue_being_built); + /* For debug and informative reasons, hadc handle saves JSQR setting */ + hadc->InjectionConfig.ContextQueue = tmp_jsqr_context_queue_being_built; + + } + } + else + { + /* Case of scan mode enabled, several channels to set into injected group */ + /* sequencer. */ + /* */ + /* Procedure to define injected context register JSQR over successive */ + /* calls of this function, for each injected channel rank: */ + /* 1. Start new context and set parameters related to all injected */ + /* channels: injected sequence length and trigger. */ + + /* if hadc->InjectionConfig.ChannelCount is equal to 0, this is the first */ + /* call of the context under setting */ + if (hadc->InjectionConfig.ChannelCount == 0U) + { + /* Initialize number of channels that will be configured on the context */ + /* being built */ + hadc->InjectionConfig.ChannelCount = pConfigInjected->InjectedNbrOfConversion; + /* Handle hadc saves the context under build up over each HAL_ADCEx_InjectedConfigChannel() + call, this context will be written in JSQR register at the last call. + At this point, the context is merely reset */ + hadc->InjectionConfig.ContextQueue = 0x00000000U; + + /* Configuration of context register JSQR: */ + /* - number of ranks in injected group sequencer */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + + /* Enable external trigger if trigger selection is different of */ + /* software start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigInjecConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (pConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) + { + tmp_jsqr_context_queue_being_built = ((pConfigInjected->InjectedNbrOfConversion - 1U) + | (pConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) + | pConfigInjected->ExternalTrigInjecConvEdge + ); + } + else + { + tmp_jsqr_context_queue_being_built = ((pConfigInjected->InjectedNbrOfConversion - 1U)); + } + + } + + /* 2. Continue setting of context under definition with parameter */ + /* related to each channel: channel rank sequence */ + /* Clear the old JSQx bits for the selected rank */ + tmp_jsqr_context_queue_being_built &= ~ADC_JSQR_RK(ADC_SQR3_SQ10, pConfigInjected->InjectedRank); + + /* Set the JSQx bits for the selected rank */ + tmp_jsqr_context_queue_being_built |= ADC_JSQR_RK(pConfigInjected->InjectedChannel, pConfigInjected->InjectedRank); + + /* Decrease channel count */ + hadc->InjectionConfig.ChannelCount--; + + /* 3. tmp_jsqr_context_queue_being_built is fully built for this HAL_ADCEx_InjectedConfigChannel() + call, aggregate the setting to those already built during the previous + HAL_ADCEx_InjectedConfigChannel() calls (for the same context of course) */ + hadc->InjectionConfig.ContextQueue |= tmp_jsqr_context_queue_being_built; + + /* 4. End of context setting: if this is the last channel set, then write context + into register JSQR and make it enter into queue */ + if (hadc->InjectionConfig.ChannelCount == 0U) + { + MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, hadc->InjectionConfig.ContextQueue); + } + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on injected group: */ + /* - Injected context queue: Queue disable (active context is kept) or */ + /* enable (context decremented, up to 2 contexts queued) */ + /* - Injected discontinuous mode: can be enabled only if auto-injected */ + /* mode is disabled. */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* If auto-injected mode is disabled: no constraint */ + if (pConfigInjected->AutoInjectedConv == DISABLE) + { + MODIFY_REG(hadc->Instance->CFGR, + ADC_CFGR_JQM | ADC_CFGR_JDISCEN, + ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)pConfigInjected->QueueInjectedContext) | + ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)pConfigInjected->InjectedDiscontinuousConvMode)); + } + /* If auto-injected mode is enabled: Injected discontinuous setting is */ + /* discarded. */ + else + { + MODIFY_REG(hadc->Instance->CFGR, + ADC_CFGR_JQM | ADC_CFGR_JDISCEN, + ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)pConfigInjected->QueueInjectedContext)); + } + + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular and injected groups: */ + /* - Automatic injected conversion: can be enabled if injected group */ + /* external triggers are disabled. */ + /* - Channel sampling time */ + /* - Channel offset */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + /* If injected group external triggers are disabled (set to injected */ + /* software start): no constraint */ + if ((pConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START) + || (pConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE)) + { + if (pConfigInjected->AutoInjectedConv == ENABLE) + { + SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); + } + else + { + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); + } + } + /* If Automatic injected conversion was intended to be set and could not */ + /* due to injected group external triggers enabled, error is reported. */ + else + { + if (pConfigInjected->AutoInjectedConv == ENABLE) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + else + { + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); + } + } + + if (pConfigInjected->InjecOversamplingMode == ENABLE) + { + assert_param(IS_ADC_OVERSAMPLING_RATIO(pConfigInjected->InjecOversampling.Ratio)); + assert_param(IS_ADC_RIGHT_BIT_SHIFT(pConfigInjected->InjecOversampling.RightBitShift)); + + /* JOVSE must be reset in case of triggered regular mode */ + assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS) + == (ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS))); + + /* Configuration of Injected Oversampler: */ + /* - Oversampling Ratio */ + /* - Right bit shift */ + + /* Enable OverSampling mode */ + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_JOVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS, + ADC_CFGR2_JOVSE | + pConfigInjected->InjecOversampling.Ratio | + pConfigInjected->InjecOversampling.RightBitShift + ); + } + else + { + /* Disable Regular OverSampling */ + CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_JOVSE); + } + + /* Manage specific case of sampling time 3.5 cycles replacing 2.5 cyles */ + if (pConfigInjected->InjectedSamplingTime == ADC_SAMPLETIME_3CYCLES_5) + { + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfigInjected->InjectedChannel, LL_ADC_SAMPLINGTIME_2CYCLES_5); + + /* Set ADC sampling time common configuration */ + LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_3C5_REPL_2C5); + } + else + { + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfigInjected->InjectedChannel, + pConfigInjected->InjectedSamplingTime); + + /* Set ADC sampling time common configuration */ + LL_ADC_SetSamplingTimeCommonConfig(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_DEFAULT); + } + + /* Configure the offset: offset enable/disable, channel, offset value */ + + /* Shift the offset with respect to the selected ADC resolution. */ + /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */ + tmp_offset_shifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, pConfigInjected->InjectedOffset); + + if (pConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) + { + /* Set ADC selected offset number */ + LL_ADC_SetOffset(hadc->Instance, pConfigInjected->InjectedOffsetNumber, pConfigInjected->InjectedChannel, + tmp_offset_shifted); + + /* Set ADC selected offset sign & saturation */ + LL_ADC_SetOffsetSign(hadc->Instance, pConfigInjected->InjectedOffsetNumber, pConfigInjected->InjectedOffsetSign); + LL_ADC_SetOffsetSaturation(hadc->Instance, pConfigInjected->InjectedOffsetNumber, + (pConfigInjected->InjectedOffsetSaturation == ENABLE) ? + LL_ADC_OFFSET_SATURATION_ENABLE : LL_ADC_OFFSET_SATURATION_DISABLE); + } + else + { + /* Scan each offset register to check if the selected channel is targeted. */ + /* If this is the case, the corresponding offset number is disabled. */ + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE); + } + if (__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4)) + == __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfigInjected->InjectedChannel)) + { + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE); + } + } + + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Single or differential mode */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set mode single-ended or differential input of the selected ADC channel */ + LL_ADC_SetChannelSingleDiff(hadc->Instance, pConfigInjected->InjectedChannel, pConfigInjected->InjectedSingleDiff); + + /* Configuration of differential mode */ + /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */ + if (pConfigInjected->InjectedSingleDiff == ADC_DIFFERENTIAL_ENDED) + { + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, + (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL( + (__LL_ADC_CHANNEL_TO_DECIMAL_NB( + (uint32_t)pConfigInjected->InjectedChannel) + + 1UL) & 0x1FUL)), + pConfigInjected->InjectedSamplingTime); + } + + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit(). */ + + if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfigInjected->InjectedChannel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + if (ADC_TEMPERATURE_SENSOR_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) + * (((SystemCoreClock / (100000UL * 2UL)) + 1UL) + 1UL)); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + } + else if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + if (ADC_BATTERY_VOLTAGE_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + } + else if ((pConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT) + && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + if (ADC_VREFINT_INSTANCE(hadc)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + } + else if (pConfigInjected->InjectedChannel == ADC_CHANNEL_VDDCORE) + { + if (ADC_VDDCORE_INSTANCE(hadc)) + { + LL_ADC_SetPathInternalChAdd(hadc->Instance, LL_ADC_PATH_INTERNAL_VDDCORE); + } + } + else + { + /* nothing to do */ + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Enable ADC multimode and configure multimode parameters + * @note Possibility to update parameters on the fly: + * This function initializes multimode parameters, following + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_MultiModeTypeDef" on the fly, without resetting + * the ADCs. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_MultiModeTypeDef". + * @note To move back configuration from multimode to single mode, ADC must + * be reset (using function HAL_ADC_Init() ). + * @param hadc Master ADC handle + * @param pMultimode Structure of ADC multimode configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, const ADC_MultiModeTypeDef *pMultimode) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + ADC_Common_TypeDef *tmpADC_Common; + ADC_HandleTypeDef tmp_hadc_slave; + uint32_t tmp_hadc_slave_conversion_on_going; + + /* Check the parameters */ + assert_param(IS_ADC_MULTIMODE_MASTER_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_MULTIMODE(pMultimode->Mode)); + if (pMultimode->Mode != ADC_MODE_INDEPENDENT) + { + assert_param(IS_ADC_DMA_ACCESS_MULTIMODE(pMultimode->DMAAccessMode)); + assert_param(IS_ADC_SAMPLING_DELAY(pMultimode->TwoSamplingDelay)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Temporary handle minimum initialization */ + __HAL_ADC_RESET_HANDLE_STATE(&tmp_hadc_slave); + ADC_CLEAR_ERRORCODE(&tmp_hadc_slave); + + ADC_MULTI_SLAVE(hadc, &tmp_hadc_slave); + + if (tmp_hadc_slave.Instance == NULL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Multimode DMA configuration */ + /* - Multimode DMA mode */ + tmp_hadc_slave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmp_hadc_slave)->Instance); + if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + && (tmp_hadc_slave_conversion_on_going == 0UL)) + { + /* Pointer to the common control register */ + tmpADC_Common = __LL_ADC_COMMON_INSTANCE(hadc->Instance); + + /* If multimode is selected, configure all multimode parameters. */ + /* Otherwise, reset multimode parameters (can be used in case of */ + /* transition from multimode to independent mode). */ + if (pMultimode->Mode != ADC_MODE_INDEPENDENT) + { + MODIFY_REG(tmpADC_Common->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG, + pMultimode->DMAAccessMode | + ADC_CCR_MULTI_DMACONTREQ((hadc->Init.ConversionDataManagement & ADC_CFGR_DMACFG) + >> ADC_CFGR_DMACFG_Pos)); + + /* Parameters that can be updated only when ADC is disabled: */ + /* - Multimode mode selection */ + /* - Multimode delay */ + /* Note: Delay range depends on selected resolution: */ + /* from 1 to 12 clock cycles for 12 bits */ + /* from 1 to 10 clock cycles for 10 bits, */ + /* from 1 to 8 clock cycles for 8 bits */ + /* from 1 to 6 clock cycles for 6 bits */ + /* If a higher delay is selected, it will be clipped to maximum delay */ + /* range */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) == 0UL) + { + MODIFY_REG(tmpADC_Common->CCR, + ADC_CCR_DUAL | + ADC_CCR_DELAY, + pMultimode->Mode | + pMultimode->TwoSamplingDelay + ); + } + } + else /* ADC_MODE_INDEPENDENT */ + { + CLEAR_BIT(tmpADC_Common->CCR, ADC_CCR_MDMA | ADC_CCR_DMACFG); + + /* Parameters that can be updated only when ADC is disabled: */ + /* - Multimode mode selection */ + /* - Multimode delay */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) == 0UL) + { + CLEAR_BIT(tmpADC_Common->CCR, ADC_CCR_DUAL | ADC_CCR_DELAY); + } + } + } + /* If one of the ADC sharing the same common group is enabled, no update */ + /* could be done on neither of the multimode structure parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Enable Injected Queue + * @note This function resets CFGR register JQDIS bit in order to enable the + * Injected Queue. JQDIS can be written only when ADSTART and JDSTART + * are both equal to 0 to ensure that no regular nor injected + * conversion is ongoing. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + + /* Parameter can be set only if no conversion is on-going */ + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); + + /* Update state, clear previous result related to injected queue overflow */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF); + + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @brief Disable Injected Queue + * @note This function sets CFGR register JQDIS bit in order to disable the + * Injected Queue. JQDIS can be written only when ADSTART and JDSTART + * are both equal to 0 to ensure that no regular nor injected + * conversion is ongoing. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + uint32_t tmp_adc_is_conversion_on_going_regular; + uint32_t tmp_adc_is_conversion_on_going_injected; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); + + /* Parameter can be set only if no conversion is on-going */ + if ((tmp_adc_is_conversion_on_going_regular == 0UL) + && (tmp_adc_is_conversion_on_going_injected == 0UL) + ) + { + LL_ADC_INJ_SetQueueMode(hadc->Instance, LL_ADC_INJ_QUEUE_DISABLE); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @brief Disable ADC voltage regulator. + * @note Disabling voltage regulator allows to save power. This operation can + * be carried out only when ADC is disabled. + * @note To enable again the voltage regulator, the user is expected to + * resort to HAL_ADC_Init() API. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_DisableInternalRegulator(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @brief Enter ADC deep-power-down mode + * @note This mode is achieved in setting DEEPPWD bit and allows to save power + * in reducing leakage currents. It is particularly interesting before + * entering stop modes. + * @note Setting DEEPPWD automatically clears ADVREGEN bit and disables the + * ADC voltage regulator. This means that this API encompasses + * HAL_ADCEx_DisableVoltageRegulator(). Additionally, the internal + * calibration is lost. + * @note To exit the ADC deep-power-down mode, the user is expected to + * resort to HAL_ADC_Init() API as well as to relaunch a calibration + * with HAL_ADCEx_Calibration_Start() API or to re-apply a previously + * saved calibration factor. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_EnableDeepPowerDown(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cec.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cec.c new file mode 100644 index 000000000..cbe010c47 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cec.c @@ -0,0 +1,997 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cec.c + * @author MCD Application Team + * @brief CEC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the High Definition Multimedia Interface + * Consumer Electronics Control Peripheral (CEC). + * + Initialization and de-initialization function + * + IO operation function + * + Peripheral Control function + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The CEC HAL driver can be used as follow: + + (#) Declare a CEC_HandleTypeDef handle structure. + (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API: + (##) Enable the CEC interface clock. + (##) CEC pins configuration: + (+++) Enable the clock for the CEC GPIOs. + (+++) Configure these CEC pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT() + and HAL_CEC_Receive_IT() APIs): + (+++) Configure the CEC interrupt priority. + (+++) Enable the NVIC CEC IRQ handle. + (+++) The specific CEC interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit + and receive process. + + (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in + in case of Bit Rising Error, Error-Bit generation conditions, device logical + address and Listen mode in the hcec Init structure. + + (#) Initialize the CEC registers by calling the HAL_CEC_Init() API. + + [..] + (@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc) + by calling the customed HAL_CEC_MspInit() API. + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_CEC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback() + to register an interrupt callback. + + Function HAL_CEC_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CEC MspInit. + (+) MspDeInitCallback : CEC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks + HAL_CEC_RegisterRxCpltCallback(). + + Use function HAL_CEC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CEC MspInit. + (+) MspDeInitCallback : CEC MspDeInit. + + For callback HAL_CEC_RxCpltCallback use dedicated unregister callback : + HAL_CEC_UnRegisterRxCpltCallback(). + + By default, after the HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples HAL_CEC_TxCpltCallback() , HAL_CEC_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_CEC_Init()/ HAL_CEC_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_CEC_Init() / HAL_CEC_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + Callbacks can be registered/unregistered in HAL_CEC_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_CEC_STATE_READY or HAL_CEC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_CEC_RegisterCallback() before calling HAL_CEC_DeInit() + or HAL_CEC_Init() function. + + When the compilation define USE_HAL_CEC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup CEC CEC + * @brief HAL CEC module driver + * @{ + */ +#ifdef HAL_CEC_MODULE_ENABLED +#if defined (CEC) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup CEC_Exported_Functions CEC Exported Functions + * @{ + */ + +/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the CEC + (+) The following parameters need to be configured: + (++) SignalFreeTime + (++) Tolerance + (++) BRERxStop (RX stopped or not upon Bit Rising Error) + (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error) + (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error) + (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error) + (++) SignalFreeTimeOption (SFT Timer start definition) + (++) OwnAddress (CEC device address) + (++) ListenMode + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CEC mode according to the specified + * parameters in the CEC_InitTypeDef and creates the associated handle . + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec) +{ + /* Check the CEC handle allocation */ + if ((hcec == NULL) || (hcec->Init.RxBuffer == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance)); + assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime)); + assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance)); + assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop)); + assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen)); + assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen)); + assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen)); + assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption)); + assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode)); + assert_param(IS_CEC_OWN_ADDRESS(hcec->Init.OwnAddress)); + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + if (hcec->gState == HAL_CEC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcec->Lock = HAL_UNLOCKED; + + hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hcec->MspInitCallback == NULL) + { + hcec->MspInitCallback = HAL_CEC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hcec->MspInitCallback(hcec); + } +#else + if (hcec->gState == HAL_CEC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcec->Lock = HAL_UNLOCKED; + /* Init the low level hardware : GPIO, CLOCK */ + HAL_CEC_MspInit(hcec); + } +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + hcec->gState = HAL_CEC_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + /* Write to CEC Control Register */ + hcec->Instance->CFGR = hcec->Init.SignalFreeTime | hcec->Init.Tolerance | hcec->Init.BRERxStop | \ + hcec->Init.BREErrorBitGen | hcec->Init.LBPEErrorBitGen | \ + hcec->Init.BroadcastMsgNoErrorBitGen | \ + hcec->Init.SignalFreeTimeOption | ((uint32_t)(hcec->Init.OwnAddress) << 16U) | \ + hcec->Init.ListenMode; + + /* Enable the following CEC Transmission/Reception interrupts as + * well as the following CEC Transmission/Reception Errors interrupts + * Rx Byte Received IT + * End of Reception IT + * Rx overrun + * Rx bit rising error + * Rx short bit period error + * Rx long bit period error + * Rx missing acknowledge + * Tx Byte Request IT + * End of Transmission IT + * Tx Missing Acknowledge IT + * Tx-Error IT + * Tx-Buffer Underrun IT + * Tx arbitration lost */ + __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | + CEC_IER_TX_ALL_ERR); + + /* Enable the CEC Peripheral */ + __HAL_CEC_ENABLE(hcec); + + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->gState = HAL_CEC_STATE_READY; + hcec->RxState = HAL_CEC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the CEC peripheral + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec) +{ + /* Check the CEC handle allocation */ + if (hcec == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance)); + + hcec->gState = HAL_CEC_STATE_BUSY; + +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) + if (hcec->MspDeInitCallback == NULL) + { + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hcec->MspDeInitCallback(hcec); + +#else + /* DeInit the low level hardware */ + HAL_CEC_MspDeInit(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + /* Clear Flags */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND | CEC_FLAG_TXBR | CEC_FLAG_RXBR | CEC_FLAG_RXEND | CEC_ISR_ALL_ERROR); + + /* Disable the following CEC Transmission/Reception interrupts as + * well as the following CEC Transmission/Reception Errors interrupts + * Rx Byte Received IT + * End of Reception IT + * Rx overrun + * Rx bit rising error + * Rx short bit period error + * Rx long bit period error + * Rx missing acknowledge + * Tx Byte Request IT + * End of Transmission IT + * Tx Missing Acknowledge IT + * Tx-Error IT + * Tx-Buffer Underrun IT + * Tx arbitration lost */ + __HAL_CEC_DISABLE_IT(hcec, CEC_IT_RXBR | CEC_IT_RXEND | CEC_IER_RX_ALL_ERR | CEC_IT_TXBR | CEC_IT_TXEND | + CEC_IER_TX_ALL_ERR); + + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->gState = HAL_CEC_STATE_RESET; + hcec->RxState = HAL_CEC_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hcec); + + return HAL_OK; +} + +/** + * @brief Initializes the Own Address of the CEC device + * @param hcec CEC handle + * @param CEC_OwnAddress The CEC own address. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress) +{ + /* Check the parameters */ + assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress)); + + if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY)) + { + /* Process Locked */ + __HAL_LOCK(hcec); + + hcec->gState = HAL_CEC_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_CEC_DISABLE(hcec); + + if (CEC_OwnAddress != CEC_OWN_ADDRESS_NONE) + { + hcec->Instance->CFGR |= ((uint32_t)CEC_OwnAddress << 16); + } + else + { + hcec->Instance->CFGR &= ~(CEC_CFGR_OAR); + } + + hcec->gState = HAL_CEC_STATE_READY; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hcec); + + /* Enable the Peripheral */ + __HAL_CEC_ENABLE(hcec); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief CEC MSP Init + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_MspInit can be implemented in the user file + */ +} + +/** + * @brief CEC MSP DeInit + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_MspDeInit can be implemented in the user file + */ +} +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User CEC Callback + * To be used instead of the weak predefined callback + * @param hcec CEC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID + * @arg HAL_CEC_ERROR_CB_ID Error callback ID + * @arg HAL_CEC_MSPINIT_CB_ID MspInit callback ID + * @arg HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, + pCEC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcec); + + if (hcec->gState == HAL_CEC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = pCallback; + break; + + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = pCallback; + break; + + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcec->gState == HAL_CEC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = pCallback; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + + return status; +} + +/** + * @brief Unregister an CEC Callback + * CEC callback is redirected to the weak predefined callback + * @param hcec uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID + * @arg HAL_CEC_ERROR_CB_ID Error callback ID + * @arg HAL_CEC_MSPINIT_CB_ID MspInit callback ID + * @arg HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcec); + + if (hcec->gState == HAL_CEC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CEC_TX_CPLT_CB_ID : + hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_CEC_ERROR_CB_ID : + hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcec->gState == HAL_CEC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CEC_MSPINIT_CB_ID : + hcec->MspInitCallback = HAL_CEC_MspInit; + break; + + case HAL_CEC_MSPDEINIT_CB_ID : + hcec->MspDeInitCallback = HAL_CEC_MspDeInit; + break; + + default : + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + + return status; +} + +/** + * @brief Register CEC RX complete Callback + * To be used instead of the weak HAL_CEC_RxCpltCallback() predefined callback + * @param hcec CEC handle + * @param pCallback pointer to the Rx transfer compelete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcec); + + if (HAL_CEC_STATE_READY == hcec->RxState) + { + hcec->RxCpltCallback = pCallback; + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + return status; +} + +/** + * @brief UnRegister CEC RX complete Callback + * CEC RX complete Callback is redirected to the weak HAL_CEC_RxCpltCallback() predefined callback + * @param hcec CEC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcec); + + if (HAL_CEC_STATE_READY == hcec->RxState) + { + hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak CEC RxCpltCallback */ + } + else + { + /* Update the error code */ + hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcec); + return status; +} +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions + * @brief CEC Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the CEC data transfers. + + (#) The CEC handle must contain the initiator (TX side) and the destination (RX side) + logical addresses (4-bit long addresses, 0xF for broadcast messages destination) + + (#) The communication is performed using Interrupts. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated CEC IRQ when using Interrupt mode. + The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_CEC_ErrorCallback() user callback will be executed when a communication + error is detected + + (#) API's with Interrupt are : + (+) HAL_CEC_Transmit_IT() + (+) HAL_CEC_IRQHandler() + + (#) A set of User Callbacks are provided: + (+) HAL_CEC_TxCpltCallback() + (+) HAL_CEC_RxCpltCallback() + (+) HAL_CEC_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Send data in interrupt mode + * @param hcec CEC handle + * @param InitiatorAddress Initiator address + * @param DestinationAddress destination logical address + * @param pData pointer to input byte data buffer + * @param Size amount of data to be sent in bytes (without counting the header). + * 0 means only the header is sent (ping operation). + * Maximum TX size is 15 bytes (1 opcode and up to 14 operands). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, + const uint8_t *pData, uint32_t Size) +{ + /* if the peripheral isn't already busy and if there is no previous transmission + already pending due to arbitration lost */ + if (hcec->gState == HAL_CEC_STATE_READY) + { + if ((pData == NULL) && (Size > 0U)) + { + return HAL_ERROR; + } + + assert_param(IS_CEC_ADDRESS(DestinationAddress)); + assert_param(IS_CEC_ADDRESS(InitiatorAddress)); + assert_param(IS_CEC_MSGSIZE(Size)); + + /* Process Locked */ + __HAL_LOCK(hcec); + hcec->pTxBuffPtr = pData; + hcec->gState = HAL_CEC_STATE_BUSY_TX; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + + /* initialize the number of bytes to send, + * 0 means only one header is sent (ping operation) */ + hcec->TxXferCount = (uint16_t)Size; + + /* in case of no payload (Size = 0), sender is only pinging the system; + Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */ + if (Size == 0U) + { + __HAL_CEC_LAST_BYTE_TX_SET(hcec); + } + + /* send header block */ + hcec->Instance->TXDR = (uint32_t)(((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress); + + /* Set TX Start of Message (TXSOM) bit */ + __HAL_CEC_FIRST_BYTE_TX_SET(hcec); + + /* Process Unlocked */ + __HAL_UNLOCK(hcec); + + return HAL_OK; + + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Get size of the received frame. + * @param hcec CEC handle + * @retval Frame size + */ +uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec) +{ + return hcec->RxXferSize; +} + +/** + * @brief Change Rx Buffer. + * @param hcec CEC handle + * @param Rxbuffer Rx Buffer + * @note This function can be called only inside the HAL_CEC_RxCpltCallback() + * @retval Frame size + */ +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer) +{ + hcec->Init.RxBuffer = Rxbuffer; +} + +/** + * @brief This function handles CEC interrupt requests. + * @param hcec CEC handle + * @retval None + */ +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec) +{ + + /* save interrupts register for further error or interrupts handling purposes */ + uint32_t itflag; + itflag = hcec->Instance->ISR; + + + /* ----------------------------Arbitration Lost Management----------------------------------*/ + /* CEC TX arbitration error interrupt occurred --------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, CEC_FLAG_ARBLST)) + { + hcec->ErrorCode = HAL_CEC_ERROR_ARBLST; + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST); + } + + /* ----------------------------Rx Management----------------------------------*/ + /* CEC RX byte received interrupt ---------------------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, CEC_FLAG_RXBR)) + { + /* reception is starting */ + hcec->RxState = HAL_CEC_STATE_BUSY_RX; + hcec->RxXferSize++; + /* read received byte */ + *hcec->Init.RxBuffer = (uint8_t) hcec->Instance->RXDR; + hcec->Init.RxBuffer++; + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR); + } + + /* CEC RX end received interrupt ---------------------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, CEC_FLAG_RXEND)) + { + /* clear IT */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND); + + /* Rx process is completed, restore hcec->RxState to Ready */ + hcec->RxState = HAL_CEC_STATE_READY; + hcec->ErrorCode = HAL_CEC_ERROR_NONE; + hcec->Init.RxBuffer -= hcec->RxXferSize; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->RxCpltCallback(hcec, hcec->RxXferSize); +#else + HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + hcec->RxXferSize = 0U; + } + + /* ----------------------------Tx Management----------------------------------*/ + /* CEC TX byte request interrupt ------------------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, CEC_FLAG_TXBR)) + { + --hcec->TxXferCount; + if (hcec->TxXferCount == 0U) + { + /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */ + __HAL_CEC_LAST_BYTE_TX_SET(hcec); + } + /* In all cases transmit the byte */ + hcec->Instance->TXDR = (uint8_t) * hcec->pTxBuffPtr; + hcec->pTxBuffPtr++; + /* clear Tx-Byte request flag */ + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR); + } + + /* CEC TX end interrupt ------------------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, CEC_FLAG_TXEND)) + { + __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXEND); + + /* Tx process is ended, restore hcec->gState to Ready */ + hcec->gState = HAL_CEC_STATE_READY; + /* Call the Process Unlocked before calling the Tx call back API to give the possibility to + start again the Transmission under the Tx call back API */ + __HAL_UNLOCK(hcec); + hcec->ErrorCode = HAL_CEC_ERROR_NONE; +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->TxCpltCallback(hcec); +#else + HAL_CEC_TxCpltCallback(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + } + + /* ----------------------------Rx/Tx Error Management----------------------------------*/ + if ((itflag & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE | CEC_ISR_TXUDR | + CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U) + { + hcec->ErrorCode = itflag; + __HAL_CEC_CLEAR_FLAG(hcec, HAL_CEC_ERROR_RXOVR | HAL_CEC_ERROR_BRE | CEC_FLAG_LBPE | CEC_FLAG_SBPE | + HAL_CEC_ERROR_RXACKE | HAL_CEC_ERROR_TXUDR | HAL_CEC_ERROR_TXERR | HAL_CEC_ERROR_TXACKE); + + + if ((itflag & (CEC_ISR_RXOVR | CEC_ISR_BRE | CEC_ISR_SBPE | CEC_ISR_LBPE | CEC_ISR_RXACKE)) != 0U) + { + hcec->Init.RxBuffer -= hcec->RxXferSize; + hcec->RxXferSize = 0U; + hcec->RxState = HAL_CEC_STATE_READY; + } + else if (((itflag & CEC_ISR_ARBLST) == 0U) && ((itflag & (CEC_ISR_TXUDR | CEC_ISR_TXERR | CEC_ISR_TXACKE)) != 0U)) + { + /* Set the CEC state ready to be able to start again the process */ + hcec->gState = HAL_CEC_STATE_READY; + } + else + { + /* Nothing todo*/ + } +#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1U) + hcec->ErrorCallback(hcec); +#else + /* Error Call Back */ + HAL_CEC_ErrorCallback(hcec); +#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ + } + else + { + /* Nothing todo*/ + } +} + +/** + * @brief Tx Transfer completed callback + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback + * @param hcec CEC handle + * @param RxFrameSize Size of frame + * @retval None + */ +__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + UNUSED(RxFrameSize); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief CEC error callbacks + * @param hcec CEC handle + * @retval None + */ +__weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcec); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CEC_ErrorCallback can be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function + * @brief CEC control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control function ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the CEC. + (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral. + (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral. +@endverbatim + * @{ + */ +/** + * @brief return the CEC state + * @param hcec pointer to a CEC_HandleTypeDef structure that contains + * the configuration information for the specified CEC module. + * @retval HAL state + */ +HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = hcec->gState; + temp2 = hcec->RxState; + + return (HAL_CEC_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the CEC error code + * @param hcec pointer to a CEC_HandleTypeDef structure that contains + * the configuration information for the specified CEC. + * @retval CEC Error Code + */ +uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec) +{ + return hcec->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* CEC */ +#endif /* HAL_CEC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cordic.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cordic.c new file mode 100644 index 000000000..7dc8d2d38 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cordic.c @@ -0,0 +1,1357 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cordic.c + * @author MCD Application Team + * @brief CORDIC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORDIC peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Callback functions + * + IRQ handler management + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ================================================================================ + ##### How to use this driver ##### + ================================================================================ + [..] + The CORDIC HAL driver can be used as follows: + + (#) Initialize the CORDIC low level resources by implementing the HAL_CORDIC_MspInit(): + (++) Enable the CORDIC interface clock using __HAL_RCC_CORDIC_CLK_ENABLE() + (++) In case of using interrupts (e.g. HAL_CORDIC_Calculate_IT()) + (+++) Configure the CORDIC interrupt priority using HAL_NVIC_SetPriority() + (+++) Enable the CORDIC IRQ handler using HAL_NVIC_EnableIRQ() + (+++) In CORDIC IRQ handler, call HAL_CORDIC_IRQHandler() + (++) In case of using DMA to control data transfer (e.g. HAL_CORDIC_Calculate_DMA()) + (+++) Enable the DMA2 interface clock using + __HAL_RCC_DMA2_CLK_ENABLE() + (+++) Configure and enable two DMA channels one for managing data transfer from + memory to peripheral (input channel) and another channel for managing data + transfer from peripheral to memory (output channel) + (+++) Associate the initialized DMA handle to the CORDIC DMA handle + using __HAL_LINKDMA() + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the two DMA channels. + Resort to HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ() + + (#) Initialize the CORDIC HAL using HAL_CORDIC_Init(). This function + (++) resorts to HAL_CORDIC_MspInit() for low-level initialization, + + (#) Configure CORDIC processing (calculation) using HAL_CORDIC_Configure(). + This function configures: + (++) Processing functions: Cosine, Sine, Phase, Modulus, Arctangent, + Hyperbolic cosine, Hyperbolic sine, Hyperbolic arctangent, + Natural log, Square root + (++) Scaling factor: 1 to 2exp(-7) + (++) Width of input data: 32 bits input data size (Q1.31 format) or 16 bits + input data size (Q1.15 format) + (++) Width of output data: 32 bits output data size (Q1.31 format) or 16 bits + output data size (Q1.15 format) + (++) Number of 32-bit write expected for one calculation: One 32-bits write + or Two 32-bit write + (++) Number of 32-bit read expected after one calculation: One 32-bits read + or Two 32-bit read + (++) Precision: 1 to 15 cycles for calculation (the more cycles, the better precision) + + (#) Four processing (calculation) functions are available: + (++) Polling mode: processing API is blocking function + i.e. it processes the data and wait till the processing is finished + API is HAL_CORDIC_Calculate + (++) Polling Zero-overhead mode: processing API is blocking function + i.e. it processes the data and wait till the processing is finished + A bit faster than standard polling mode, but blocking also AHB bus + API is HAL_CORDIC_CalculateZO + (++) Interrupt mode: processing API is not blocking functions + i.e. it processes the data under interrupt + API is HAL_CORDIC_Calculate_IT + (++) DMA mode: processing API is not blocking functions and the CPU is + not used for data transfer, + i.e. the data transfer is ensured by DMA + API is HAL_CORDIC_Calculate_DMA + + (#) Call HAL_CORDIC_DeInit() to de-initialize the CORDIC peripheral. This function + (++) resorts to HAL_CORDIC_MspDeInit() for low-level de-initialization, + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_CORDIC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_CORDIC_RegisterCallback() to register an interrupt callback. + + Function HAL_CORDIC_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : Error Callback. + (+) CalculateCpltCallback : Calculate complete Callback. + (+) MspInitCallback : CORDIC MspInit. + (+) MspDeInitCallback : CORDIC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_CORDIC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_CORDIC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ErrorCallback : Error Callback. + (+) CalculateCpltCallback : Calculate complete Callback. + (+) MspInitCallback : CORDIC MspInit. + (+) MspDeInitCallback : CORDIC MspDeInit. + + By default, after the HAL_CORDIC_Init() and when the state is HAL_CORDIC_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples HAL_CORDIC_ErrorCallback(), HAL_CORDIC_CalculateCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_CORDIC_Init()/ HAL_CORDIC_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_CORDIC_Init()/ HAL_CORDIC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_CORDIC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_CORDIC_STATE_READY or HAL_CORDIC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_CORDIC_RegisterCallback() before calling HAL_CORDIC_DeInit() + or HAL_CORDIC_Init() function. + + When The compilation define USE_HAL_CORDIC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#if defined(CORDIC) +#ifdef HAL_CORDIC_MODULE_ENABLED + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup CORDIC CORDIC + * @brief CORDIC HAL driver modules. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup CORDIC_Private_Functions CORDIC Private Functions + * @{ + */ +static void CORDIC_WriteInDataIncrementPtr(const CORDIC_HandleTypeDef *hcordic, const int32_t **ppInBuff); +static void CORDIC_ReadOutDataIncrementPtr(const CORDIC_HandleTypeDef *hcordic, int32_t **ppOutBuff); +static void CORDIC_DMAInCplt(DMA_HandleTypeDef *hdma); +static void CORDIC_DMAOutCplt(DMA_HandleTypeDef *hdma); +static void CORDIC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORDIC_Exported_Functions CORDIC Exported Functions + * @{ + */ + +/** @defgroup CORDIC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CORDIC peripheral and the associated handle + (+) DeInitialize the CORDIC peripheral + (+) Initialize the CORDIC MSP (MCU Specific Package) + (+) De-Initialize the CORDIC MSP + + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CORDIC peripheral and the associated handle. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_Init(CORDIC_HandleTypeDef *hcordic) +{ + /* Check the CORDIC handle allocation */ + if (hcordic == NULL) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Check the instance */ + assert_param(IS_CORDIC_ALL_INSTANCE(hcordic->Instance)); + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + if (hcordic->State == HAL_CORDIC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcordic->Lock = HAL_UNLOCKED; + + /* Reset callbacks to legacy functions */ + hcordic->ErrorCallback = HAL_CORDIC_ErrorCallback; /* Legacy weak ErrorCallback */ + hcordic->CalculateCpltCallback = HAL_CORDIC_CalculateCpltCallback; /* Legacy weak CalculateCpltCallback */ + + if (hcordic->MspInitCallback == NULL) + { + hcordic->MspInitCallback = HAL_CORDIC_MspInit; /* Legacy weak MspInit */ + } + + /* Initialize the low level hardware */ + hcordic->MspInitCallback(hcordic); + } +#else + if (hcordic->State == HAL_CORDIC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcordic->Lock = HAL_UNLOCKED; + + /* Initialize the low level hardware */ + HAL_CORDIC_MspInit(hcordic); + } +#endif /* (USE_HAL_CORDIC_REGISTER_CALLBACKS) */ + + /* Set CORDIC error code to none */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Reset pInBuff and pOutBuff */ + hcordic->pInBuff = NULL; + hcordic->pOutBuff = NULL; + + /* Reset NbCalcToOrder and NbCalcToGet */ + hcordic->NbCalcToOrder = 0U; + hcordic->NbCalcToGet = 0U; + + /* Reset DMADirection */ + hcordic->DMADirection = CORDIC_DMA_DIR_NONE; + + /* Change CORDIC peripheral state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CORDIC peripheral. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_DeInit(CORDIC_HandleTypeDef *hcordic) +{ + /* Check the CORDIC handle allocation */ + if (hcordic == NULL) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CORDIC_ALL_INSTANCE(hcordic->Instance)); + + /* Change CORDIC peripheral state */ + hcordic->State = HAL_CORDIC_STATE_BUSY; + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + if (hcordic->MspDeInitCallback == NULL) + { + hcordic->MspDeInitCallback = HAL_CORDIC_MspDeInit; + } + + /* De-Initialize the low level hardware */ + hcordic->MspDeInitCallback(hcordic); +#else + /* De-Initialize the low level hardware: CLOCK, NVIC, DMA */ + HAL_CORDIC_MspDeInit(hcordic); +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + + /* Set CORDIC error code to none */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Reset pInBuff and pOutBuff */ + hcordic->pInBuff = NULL; + hcordic->pOutBuff = NULL; + + /* Reset NbCalcToOrder and NbCalcToGet */ + hcordic->NbCalcToOrder = 0U; + hcordic->NbCalcToGet = 0U; + + /* Reset DMADirection */ + hcordic->DMADirection = CORDIC_DMA_DIR_NONE; + + /* Change CORDIC peripheral state */ + hcordic->State = HAL_CORDIC_STATE_RESET; + + /* Reset Lock */ + hcordic->Lock = HAL_UNLOCKED; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the CORDIC MSP. + * @param hcordic CORDIC handle + * @retval None + */ +__weak void HAL_CORDIC_MspInit(CORDIC_HandleTypeDef *hcordic) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcordic); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CORDIC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CORDIC MSP. + * @param hcordic CORDIC handle + * @retval None + */ +__weak void HAL_CORDIC_MspDeInit(CORDIC_HandleTypeDef *hcordic) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcordic); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CORDIC_MspDeInit can be implemented in the user file + */ +} + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +/** + * @brief Register a CORDIC CallBack. + * To be used instead of the weak predefined callback. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_CORDIC_ERROR_CB_ID error Callback ID + * @arg @ref HAL_CORDIC_CALCULATE_CPLT_CB_ID calculate complete Callback ID + * @arg @ref HAL_CORDIC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CORDIC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_RegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID, + void (* pCallback)(CORDIC_HandleTypeDef *_hcordic)) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + return HAL_ERROR; + } + + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CORDIC_ERROR_CB_ID : + hcordic->ErrorCallback = pCallback; + break; + + case HAL_CORDIC_CALCULATE_CPLT_CB_ID : + hcordic->CalculateCpltCallback = pCallback; + break; + + case HAL_CORDIC_MSPINIT_CB_ID : + hcordic->MspInitCallback = pCallback; + break; + + case HAL_CORDIC_MSPDEINIT_CB_ID : + hcordic->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcordic->State == HAL_CORDIC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CORDIC_MSPINIT_CB_ID : + hcordic->MspInitCallback = pCallback; + break; + + case HAL_CORDIC_MSPDEINIT_CB_ID : + hcordic->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 +/** + * @brief Unregister a CORDIC CallBack. + * CORDIC callback is redirected to the weak predefined callback. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_CORDIC_ERROR_CB_ID error Callback ID + * @arg @ref HAL_CORDIC_CALCULATE_CPLT_CB_ID calculate complete Callback ID + * @arg @ref HAL_CORDIC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CORDIC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_UnRegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + switch (CallbackID) + { + case HAL_CORDIC_ERROR_CB_ID : + hcordic->ErrorCallback = HAL_CORDIC_ErrorCallback; + break; + + case HAL_CORDIC_CALCULATE_CPLT_CB_ID : + hcordic->CalculateCpltCallback = HAL_CORDIC_CalculateCpltCallback; + break; + + case HAL_CORDIC_MSPINIT_CB_ID : + hcordic->MspInitCallback = HAL_CORDIC_MspInit; + break; + + case HAL_CORDIC_MSPDEINIT_CB_ID : + hcordic->MspDeInitCallback = HAL_CORDIC_MspDeInit; + break; + + default : + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcordic->State == HAL_CORDIC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CORDIC_MSPINIT_CB_ID : + hcordic->MspInitCallback = HAL_CORDIC_MspInit; + break; + + case HAL_CORDIC_MSPDEINIT_CB_ID : + hcordic->MspDeInitCallback = HAL_CORDIC_MspDeInit; + break; + + default : + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup CORDIC_Exported_Functions_Group2 Peripheral Control functions + * @brief Control functions. + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure the CORDIC peripheral: function, precision, scaling factor, + number of input data and output data, size of input data and output data. + (+) Calculate output data of CORDIC processing on input date, using the + existing CORDIC configuration + [..] Four processing functions are available for calculation: + (+) Polling mode + (+) Polling mode, with Zero-Overhead register access + (+) Interrupt mode + (+) DMA mode + +@endverbatim + * @{ + */ + +/** + * @brief Configure the CORDIC processing according to the specified + parameters in the CORDIC_ConfigTypeDef structure. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @param sConfig pointer to a CORDIC_ConfigTypeDef structure that + * contains the CORDIC configuration information. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_Configure(CORDIC_HandleTypeDef *hcordic, const CORDIC_ConfigTypeDef *sConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_CORDIC_FUNCTION(sConfig->Function)); + assert_param(IS_CORDIC_PRECISION(sConfig->Precision)); + assert_param(IS_CORDIC_SCALE(sConfig->Scale)); + assert_param(IS_CORDIC_NBWRITE(sConfig->NbWrite)); + assert_param(IS_CORDIC_NBREAD(sConfig->NbRead)); + assert_param(IS_CORDIC_INSIZE(sConfig->InSize)); + assert_param(IS_CORDIC_OUTSIZE(sConfig->OutSize)); + + /* Check handle state is ready */ + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + /* Apply all configuration parameters in CORDIC control register */ + MODIFY_REG(hcordic->Instance->CSR, \ + (CORDIC_CSR_FUNC | CORDIC_CSR_PRECISION | CORDIC_CSR_SCALE | \ + CORDIC_CSR_NARGS | CORDIC_CSR_NRES | CORDIC_CSR_ARGSIZE | CORDIC_CSR_RESSIZE), \ + (sConfig->Function | sConfig->Precision | sConfig->Scale | \ + sConfig->NbWrite | sConfig->NbRead | sConfig->InSize | sConfig->OutSize)); + } + else + { + /* Set CORDIC error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_NOT_READY; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Carry out data of CORDIC processing in polling mode, + * according to the existing CORDIC configuration. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param pInBuff Pointer to buffer containing input data for CORDIC processing. + * @param pOutBuff Pointer to buffer where output data of CORDIC processing will be stored. + * @param NbCalc Number of CORDIC calculation to process. + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_Calculate(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t index; + const int32_t *p_tmp_in_buff = pInBuff; + int32_t *p_tmp_out_buff = pOutBuff; + + /* Check parameters setting */ + if ((pInBuff == NULL) || (pOutBuff == NULL) || (NbCalc == 0U)) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + + /* Check handle state is ready */ + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + /* Reset CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_BUSY; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write of input data in Write Data register, and increment input buffer pointer */ + CORDIC_WriteInDataIncrementPtr(hcordic, &p_tmp_in_buff); + + /* Calculation is started. + Provide next set of input data, until number of calculation is achieved */ + for (index = (NbCalc - 1U); index > 0U; index--) + { + /* Write of input data in Write Data register, and increment input buffer pointer */ + CORDIC_WriteInDataIncrementPtr(hcordic, &p_tmp_in_buff); + + /* Wait for RRDY flag to be raised */ + do + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if ((HAL_GetTick() - tickstart) > Timeout) + { + /* Set CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_TIMEOUT; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Return function status */ + return HAL_ERROR; + } + } + } while (HAL_IS_BIT_CLR(hcordic->Instance->CSR, CORDIC_CSR_RRDY)); + + /* Read output data from Read Data register, and increment output buffer pointer */ + CORDIC_ReadOutDataIncrementPtr(hcordic, &p_tmp_out_buff); + } + + /* Read output data from Read Data register, and increment output buffer pointer */ + CORDIC_ReadOutDataIncrementPtr(hcordic, &p_tmp_out_buff); + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Set CORDIC error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_NOT_READY; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Carry out data of CORDIC processing in Zero-Overhead mode (output data being read + * soon as input data are written), according to the existing CORDIC configuration. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param pInBuff Pointer to buffer containing input data for CORDIC processing. + * @param pOutBuff Pointer to buffer where output data of CORDIC processing will be stored. + * @param NbCalc Number of CORDIC calculation to process. + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_CalculateZO(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t index; + const int32_t *p_tmp_in_buff = pInBuff; + int32_t *p_tmp_out_buff = pOutBuff; + + /* Check parameters setting */ + if ((pInBuff == NULL) || (pOutBuff == NULL) || (NbCalc == 0U)) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + + /* Check handle state is ready */ + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + /* Reset CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_BUSY; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write of input data in Write Data register, and increment input buffer pointer */ + CORDIC_WriteInDataIncrementPtr(hcordic, &p_tmp_in_buff); + + /* Calculation is started. + Provide next set of input data, until number of calculation is achieved */ + for (index = (NbCalc - 1U); index > 0U; index--) + { + /* Write of input data in Write Data register, and increment input buffer pointer */ + CORDIC_WriteInDataIncrementPtr(hcordic, &p_tmp_in_buff); + + /* Read output data from Read Data register, and increment output buffer pointer + The reading is performed in Zero-Overhead mode: + reading is ordered immediately without waiting result ready flag */ + CORDIC_ReadOutDataIncrementPtr(hcordic, &p_tmp_out_buff); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if ((HAL_GetTick() - tickstart) > Timeout) + { + /* Set CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_TIMEOUT; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Return function status */ + return HAL_ERROR; + } + } + } + + /* Read output data from Read Data register, and increment output buffer pointer + The reading is performed in Zero-Overhead mode: + reading is ordered immediately without waiting result ready flag */ + CORDIC_ReadOutDataIncrementPtr(hcordic, &p_tmp_out_buff); + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Set CORDIC error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_NOT_READY; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Carry out data of CORDIC processing in interrupt mode, + * according to the existing CORDIC configuration. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param pInBuff Pointer to buffer containing input data for CORDIC processing. + * @param pOutBuff Pointer to buffer where output data of CORDIC processing will be stored. + * @param NbCalc Number of CORDIC calculation to process. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_Calculate_IT(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc) +{ + const int32_t *tmp_pInBuff = pInBuff; + + /* Check parameters setting */ + if ((pInBuff == NULL) || (pOutBuff == NULL) || (NbCalc == 0U)) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + + /* Check handle state is ready */ + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + /* Reset CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_BUSY; + + /* Store the buffers addresses and number of calculations in handle, + provisioning initial write of input data that will be done */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NARGS)) + { + /* Two writes of input data are expected */ + tmp_pInBuff++; + tmp_pInBuff++; + } + else + { + /* One write of input data is expected */ + tmp_pInBuff++; + } + hcordic->pInBuff = tmp_pInBuff; + hcordic->pOutBuff = pOutBuff; + hcordic->NbCalcToOrder = NbCalc - 1U; + hcordic->NbCalcToGet = NbCalc; + + /* Enable Result Ready Interrupt */ + __HAL_CORDIC_ENABLE_IT(hcordic, CORDIC_IT_IEN); + + /* Set back pointer to start of input data buffer */ + tmp_pInBuff = pInBuff; + + /* Initiate the processing by providing input data + in the Write Data register */ + WRITE_REG(hcordic->Instance->WDATA, (uint32_t)*tmp_pInBuff); + + /* Check if second write of input data is expected */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NARGS)) + { + /* Increment pointer to input data */ + tmp_pInBuff++; + + /* Perform second write of input data */ + WRITE_REG(hcordic->Instance->WDATA, (uint32_t)*tmp_pInBuff); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Set CORDIC error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_NOT_READY; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Carry out input and/or output data of CORDIC processing in DMA mode, + * according to the existing CORDIC configuration. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param pInBuff Pointer to buffer containing input data for CORDIC processing. + * @param pOutBuff Pointer to buffer where output data of CORDIC processing will be stored. + * @param NbCalc Number of CORDIC calculation to process. + * @param DMADirection Direction of DMA transfers. + * This parameter can be one of the following values: + * @arg @ref CORDIC_DMA_Direction CORDIC DMA direction + * @note pInBuff or pOutBuff is unused in case of unique DMADirection transfer, and can + * be set to NULL value in this case. + * @note pInBuff and pOutBuff buffers must be 32-bit aligned to ensure a correct + * DMA transfer to and from the Peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CORDIC_Calculate_DMA(CORDIC_HandleTypeDef *hcordic, const int32_t *pInBuff, int32_t *pOutBuff, + uint32_t NbCalc, uint32_t DMADirection) +{ + uint32_t sizeinbuff; + uint32_t sizeoutbuff; + + /* Check the parameters */ + assert_param(IS_CORDIC_DMA_DIRECTION(DMADirection)); + + /* Check parameters setting */ + if (NbCalc == 0U) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + + /* Check if CORDIC DMA direction "Out" is requested */ + if ((DMADirection == CORDIC_DMA_DIR_OUT) || (DMADirection == CORDIC_DMA_DIR_IN_OUT)) + { + /* Check parameters setting */ + if (pOutBuff == NULL) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + } + + /* Check if CORDIC DMA direction "In" is requested */ + if ((DMADirection == CORDIC_DMA_DIR_IN) || (DMADirection == CORDIC_DMA_DIR_IN_OUT)) + { + /* Check parameters setting */ + if (pInBuff == NULL) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_PARAM; + + /* Return error status */ + return HAL_ERROR; + } + } + + if (hcordic->State == HAL_CORDIC_STATE_READY) + { + /* Reset CORDIC error code */ + hcordic->ErrorCode = HAL_CORDIC_ERROR_NONE; + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_BUSY; + + /* Get DMA direction */ + hcordic->DMADirection = DMADirection; + + /* Check if CORDIC DMA direction "Out" is requested */ + if ((DMADirection == CORDIC_DMA_DIR_OUT) || (DMADirection == CORDIC_DMA_DIR_IN_OUT)) + { + /* Set the CORDIC DMA transfer complete callback */ + hcordic->hdmaOut->XferCpltCallback = CORDIC_DMAOutCplt; + /* Set the DMA error callback */ + hcordic->hdmaOut->XferErrorCallback = CORDIC_DMAError; + + /* Check number of output data at each calculation, + to retrieve the size of output data buffer */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NRES)) + { + sizeoutbuff = 2U * NbCalc; + } + else + { + sizeoutbuff = NbCalc; + } + + /* Convert the output buffer size into corresponding number of bytes. + This is necessary as the DMA handles the data at byte-level. */ + sizeoutbuff = 4U * sizeoutbuff; + + /* Enable the DMA stream managing CORDIC output data read */ + if (HAL_DMA_Start_IT(hcordic->hdmaOut, (uint32_t)&hcordic->Instance->RDATA, (uint32_t) pOutBuff, sizeoutbuff) + != HAL_OK) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_DMA; + + /* Return error status */ + return HAL_ERROR; + } + + /* Enable output data Read DMA requests */ + SET_BIT(hcordic->Instance->CSR, CORDIC_DMA_REN); + } + + /* Check if CORDIC DMA direction "In" is requested */ + if ((DMADirection == CORDIC_DMA_DIR_IN) || (DMADirection == CORDIC_DMA_DIR_IN_OUT)) + { + /* Set the CORDIC DMA transfer complete callback */ + hcordic->hdmaIn->XferCpltCallback = CORDIC_DMAInCplt; + /* Set the DMA error callback */ + hcordic->hdmaIn->XferErrorCallback = CORDIC_DMAError; + + /* Check number of input data expected for each calculation, + to retrieve the size of input data buffer */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NARGS)) + { + sizeinbuff = 2U * NbCalc; + } + else + { + sizeinbuff = NbCalc; + } + + /* Convert the input buffer size into corresponding number of bytes. + This is necessary as the DMA handles the data at byte-level. */ + sizeinbuff = 4U * sizeinbuff; + + /* Enable the DMA stream managing CORDIC input data write */ + if (HAL_DMA_Start_IT(hcordic->hdmaIn, (uint32_t) pInBuff, (uint32_t)&hcordic->Instance->WDATA, sizeinbuff) + != HAL_OK) + { + /* Update the error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_DMA; + + /* Return error status */ + return HAL_ERROR; + } + + /* Enable input data Write DMA request */ + SET_BIT(hcordic->Instance->CSR, CORDIC_DMA_WEN); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Set CORDIC error code */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_NOT_READY; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup CORDIC_Exported_Functions_Group3 Callback functions + * @brief Callback functions. + * +@verbatim + ============================================================================== + ##### Callback functions ##### + ============================================================================== + [..] This section provides Interruption and DMA callback functions: + (+) DMA or Interrupt calculate complete + (+) DMA or Interrupt error + +@endverbatim + * @{ + */ + +/** + * @brief CORDIC error callback. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @retval None + */ +__weak void HAL_CORDIC_ErrorCallback(CORDIC_HandleTypeDef *hcordic) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcordic); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CORDIC_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief CORDIC calculate complete callback. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @retval None + */ +__weak void HAL_CORDIC_CalculateCpltCallback(CORDIC_HandleTypeDef *hcordic) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcordic); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CORDIC_CalculateCpltCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CORDIC_Exported_Functions_Group4 IRQ handler management + * @brief IRQ handler. + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== +[..] This section provides IRQ handler function. + +@endverbatim + * @{ + */ + +/** + * @brief Handle CORDIC interrupt request. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @retval None + */ +void HAL_CORDIC_IRQHandler(CORDIC_HandleTypeDef *hcordic) +{ + /* Check if calculation complete interrupt is enabled and if result ready + flag is raised */ + if (__HAL_CORDIC_GET_IT_SOURCE(hcordic, CORDIC_IT_IEN) != 0U) + { + if (__HAL_CORDIC_GET_FLAG(hcordic, CORDIC_FLAG_RRDY) != 0U) + { + /* Decrement number of calculations to get */ + hcordic->NbCalcToGet--; + + /* Read output data from Read Data register, and increment output buffer pointer */ + CORDIC_ReadOutDataIncrementPtr(hcordic, &(hcordic->pOutBuff)); + + /* Check if calculations are still to be ordered */ + if (hcordic->NbCalcToOrder > 0U) + { + /* Decrement number of calculations to order */ + hcordic->NbCalcToOrder--; + + /* Continue the processing by providing another write of input data + in the Write Data register, and increment input buffer pointer */ + CORDIC_WriteInDataIncrementPtr(hcordic, &(hcordic->pInBuff)); + } + + /* Check if all calculations results are got */ + if (hcordic->NbCalcToGet == 0U) + { + /* Disable Result Ready Interrupt */ + __HAL_CORDIC_DISABLE_IT(hcordic, CORDIC_IT_IEN); + + /* Change the CORDIC state */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Call calculation complete callback */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + /*Call registered callback*/ + hcordic->CalculateCpltCallback(hcordic); +#else + /*Call legacy weak callback*/ + HAL_CORDIC_CalculateCpltCallback(hcordic); +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + } + } + } +} + +/** + * @} + */ + +/** @defgroup CORDIC_Exported_Functions_Group5 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CORDIC handle state. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @retval HAL state + */ +HAL_CORDIC_StateTypeDef HAL_CORDIC_GetState(const CORDIC_HandleTypeDef *hcordic) +{ + /* Return CORDIC handle state */ + return hcordic->State; +} + +/** + * @brief Return the CORDIC peripheral error. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module + * @note The returned error is a bit-map combination of possible errors + * @retval Error bit-map + */ +uint32_t HAL_CORDIC_GetError(const CORDIC_HandleTypeDef *hcordic) +{ + /* Return CORDIC error code */ + return hcordic->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CORDIC_Private_Functions + * @{ + */ + +/** + * @brief Write input data for CORDIC processing, and increment input buffer pointer. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param ppInBuff Pointer to pointer to input buffer. + * @retval none + */ +static void CORDIC_WriteInDataIncrementPtr(const CORDIC_HandleTypeDef *hcordic, const int32_t **ppInBuff) +{ + /* First write of input data in the Write Data register */ + WRITE_REG(hcordic->Instance->WDATA, (uint32_t) **ppInBuff); + + /* Increment input data pointer */ + (*ppInBuff)++; + + /* Check if second write of input data is expected */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NARGS)) + { + /* Second write of input data in the Write Data register */ + WRITE_REG(hcordic->Instance->WDATA, (uint32_t) **ppInBuff); + + /* Increment input data pointer */ + (*ppInBuff)++; + } +} + +/** + * @brief Read output data of CORDIC processing, and increment output buffer pointer. + * @param hcordic pointer to a CORDIC_HandleTypeDef structure that contains + * the configuration information for CORDIC module. + * @param ppOutBuff Pointer to pointer to output buffer. + * @retval none + */ +static void CORDIC_ReadOutDataIncrementPtr(const CORDIC_HandleTypeDef *hcordic, int32_t **ppOutBuff) +{ + /* First read of output data from the Read Data register */ + **ppOutBuff = (int32_t)READ_REG(hcordic->Instance->RDATA); + + /* Increment output data pointer */ + (*ppOutBuff)++; + + /* Check if second read of output data is expected */ + if (HAL_IS_BIT_SET(hcordic->Instance->CSR, CORDIC_CSR_NRES)) + { + /* Second read of output data from the Read Data register */ + **ppOutBuff = (int32_t)READ_REG(hcordic->Instance->RDATA); + + /* Increment output data pointer */ + (*ppOutBuff)++; + } +} + +/** + * @brief DMA CORDIC Input Data process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void CORDIC_DMAInCplt(DMA_HandleTypeDef *hdma) +{ + CORDIC_HandleTypeDef *hcordic = (CORDIC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable the DMA transfer for input request */ + CLEAR_BIT(hcordic->Instance->CSR, CORDIC_DMA_WEN); + + /* Check if DMA direction is CORDIC Input only (no DMA for CORDIC Output) */ + if (hcordic->DMADirection == CORDIC_DMA_DIR_IN) + { + /* Change the CORDIC DMA direction to none */ + hcordic->DMADirection = CORDIC_DMA_DIR_NONE; + + /* Change the CORDIC state to ready */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Call calculation complete callback */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + /*Call registered callback*/ + hcordic->CalculateCpltCallback(hcordic); +#else + /*Call legacy weak callback*/ + HAL_CORDIC_CalculateCpltCallback(hcordic); +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA CORDIC Output Data process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void CORDIC_DMAOutCplt(DMA_HandleTypeDef *hdma) +{ + CORDIC_HandleTypeDef *hcordic = (CORDIC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable the DMA transfer for output request */ + CLEAR_BIT(hcordic->Instance->CSR, CORDIC_DMA_REN); + + /* Change the CORDIC DMA direction to none */ + hcordic->DMADirection = CORDIC_DMA_DIR_NONE; + + /* Change the CORDIC state to ready */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Call calculation complete callback */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + /*Call registered callback*/ + hcordic->CalculateCpltCallback(hcordic); +#else + /*Call legacy weak callback*/ + HAL_CORDIC_CalculateCpltCallback(hcordic); +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA CORDIC communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void CORDIC_DMAError(DMA_HandleTypeDef *hdma) +{ + CORDIC_HandleTypeDef *hcordic = (CORDIC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set CORDIC handle state to error */ + hcordic->State = HAL_CORDIC_STATE_READY; + + /* Set CORDIC handle error code to DMA error */ + hcordic->ErrorCode |= HAL_CORDIC_ERROR_DMA; + + /* Call user callback */ +#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1 + /*Call registered callback*/ + hcordic->ErrorCallback(hcordic); +#else + /*Call legacy weak callback*/ + HAL_CORDIC_ErrorCallback(hcordic); +#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORDIC_MODULE_ENABLED */ +#endif /* CORDIC */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cortex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cortex.c new file mode 100644 index 000000000..7cb7ac040 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cortex.c @@ -0,0 +1,569 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M7 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest pre-emption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure SysTick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32h7rsxx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. + + ========================================================================================================================== + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ========================================================================================================================== + NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bit for pre-emption priority + | | | 4 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bit for pre-emption priority + | | | 3 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bit for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bit for subpriority + ========================================================================================================================== + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + SysTick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Set the priority grouping field (pre-emption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4 4 bits for pre-emption priority, + * 0 bit for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Set the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @param PreemptPriority The pre-emption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup; + + /* Check the parameters */ + assert_param(IS_NVIC_PRIO_INTERRUPT(IRQn)); + prioritygroup = NVIC_GetPriorityGrouping(); + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority, prioritygroup)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority, prioritygroup)); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @param PriorityGroup the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4 4 bits for pre-emption priority, + * 0 bit for subpriority + * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIO_INTERRUPT(IRQn)); + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Get active interrupt (read the active register in NVIC and return the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer + * to the appropriate CMSIS device file (stm32h7rsxxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK AHB clock selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8 AHB clock divided by 8 selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + + MODIFY_REG(SysTick->CTRL, SysTick_CTRL_CLKSOURCE_Msk, CLKSource); +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Force any outstanding transfers to complete before enabling MPU */ + __DMB(); + + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Force any outstanding transfers to complete before disabling MPU */ + __DMB(); + + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU and clear the control register */ + MPU->CTRL = 0U; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Enable the MPU Region. + * @retval None + */ +void HAL_MPU_EnableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Enable the Region */ + SET_BIT(MPU->RASR,MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Disable the MPU Region. + * @retval None + */ +void HAL_MPU_DisableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR,MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param pMPU_RegionInit Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @note The region base address must be aligned to the size of the region. + * @retval None + */ +void HAL_MPU_ConfigRegion(const MPU_Region_InitTypeDef *pMPU_RegionInit) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(pMPU_RegionInit->Number)); + assert_param(IS_MPU_REGION_ENABLE(pMPU_RegionInit->Enable)); + + /* Set the Region number */ + MPU->RNR = pMPU_RegionInit->Number; + + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(pMPU_RegionInit->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(pMPU_RegionInit->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(pMPU_RegionInit->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(pMPU_RegionInit->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(pMPU_RegionInit->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(pMPU_RegionInit->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(pMPU_RegionInit->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(pMPU_RegionInit->Size)); + assert_param(IS_MPU_ADDRESS_MULTIPLE_SIZE(pMPU_RegionInit->BaseAddress, pMPU_RegionInit->Size)); + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR,MPU_RASR_ENABLE_Msk); + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR,MPU_RASR_ENABLE_Msk); + MPU->RBAR = pMPU_RegionInit->BaseAddress; + MPU->RASR = ((uint32_t)pMPU_RegionInit->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)pMPU_RegionInit->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)pMPU_RegionInit->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)pMPU_RegionInit->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)pMPU_RegionInit->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)pMPU_RegionInit->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)pMPU_RegionInit->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)pMPU_RegionInit->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)pMPU_RegionInit->Enable << MPU_RASR_ENABLE_Pos); +} + +/** + * @brief Clear pending events. + * @retval None + */ +void HAL_CORTEX_ClearEvent(void) +{ + __SEV(); + __WFE(); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc.c new file mode 100644 index 000000000..4a4560578 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc.c @@ -0,0 +1,516 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_crc.c + * @author MCD Application Team + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + (++) specify generating polynomial (peripheral default or non-default one) + (++) specify initialization value (peripheral default or non-default one) + (++) specify input data format + (++) specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CRC_Private_Functions CRC Private Functions + * @{ + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP (MCU Specific Package) + (+) DeInitialize the CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CRC according to the specified + * parameters in the CRC_InitTypeDef and create the associated handle. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if (hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + hcrc->State = HAL_CRC_STATE_BUSY; + + /* check whether or not non-default generating polynomial has been + * picked up by user */ + assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); + if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) + { + /* initialize peripheral with default generating polynomial */ + WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); + } + else + { + /* initialize CRC peripheral with generating polynomial defined by user */ + if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* check whether or not non-default CRC initial value has been + * picked up by user */ + assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); + if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) + { + WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); + } + else + { + WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); + } + + + /* set input data inversion mode */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); + + /* set output data inversion mode */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); + + /* makes sure the input data format (bytes, halfwords or words stream) + * is properly specified by user */ + assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CRC peripheral. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Check the CRC peripheral state */ + if (hcrc->State == HAL_CRC_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC calculation unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Reset IDR register content */ + CLEAR_REG(hcrc->Instance->IDR); + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + using combination of the previous CRC value and the new one. + + [..] or + + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with the previously computed CRC as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter Data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with hcrc->Instance->INIT as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit (hcrc->Instance->INIT is + * written in hcrc->Instance->DR) */ + __HAL_CRC_DR_RESET(hcrc); + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter 32-bit input data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + /* Specific 8-bit input data handling */ + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + /* Specific 16-bit input data handling */ + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CRC handle state. + * @param hcrc CRC handle + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc) +{ + /* Return CRC handle state */ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Enter 8-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + uint16_t data; + __IO uint16_t *pReg; + + /* Processing time optimization: 4 bytes are entered in a row with a single word write, + * last bytes must be carefully fed to the CRC calculator to ensure a correct type + * handling by the peripheral */ + for (i = 0U; i < (BufferLength / 4U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ + ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ + ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ + (uint32_t)pBuffer[(4U * i) + 3U]; + } + /* last bytes specific handling */ + if ((BufferLength % 4U) != 0U) + { + if ((BufferLength % 4U) == 1U) + { + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ + } + if ((BufferLength % 4U) == 2U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + } + if ((BufferLength % 4U) == 3U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ + } + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Enter 16-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + __IO uint16_t *pReg; + + /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, + * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure + * a correct type handling by the peripheral */ + for (i = 0U; i < (BufferLength / 2U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; + } + if ((BufferLength % 2U) != 0U) + { + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = pBuffer[2U * i]; + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc_ex.c new file mode 100644 index 000000000..fa7492a40 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_crc_ex.c @@ -0,0 +1,232 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_crc_ex.c + * @author MCD Application Team + * @brief Extended CRC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the CRC peripheral. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set() + (+) Configure Input or Output data inversion + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions + * @{ + */ + +/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Extended configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the generating polynomial + (+) Configure the input data inversion + (+) Configure the output data inversion + +@endverbatim + * @{ + */ + + +/** + * @brief Initialize the CRC polynomial if different from default one. + * @param hcrc CRC handle + * @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long). + * This parameter is written in normal representation, e.g. + * @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength CRC polynomial length. + * This parameter can be one of the following values: + * @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7) + * @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8) + * @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16) + * @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* Ensure that the generating polynomial is odd */ + if ((Pol & (uint32_t)(0x1U)) == 0U) + { + status = HAL_ERROR; + } + else + { + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U)) + { + } + + switch (PolyLength) + { + + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) + { + status = HAL_ERROR; + } + break; + + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + default: + status = HAL_ERROR; + break; + } + } + if (status == HAL_OK) + { + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + } + /* Return function status */ + return status; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc CRC handle + * @param InputReverseMode Input Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value) + * @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc CRC handle + * @param OutputReverseMode Output Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value) + * @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp.c new file mode 100644 index 000000000..fd99c2ebe --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp.c @@ -0,0 +1,8100 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cryp.c + * @author MCD Application Team + * @brief CRYP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cryptography (CRYP) peripheral: + * + Initialization and de-initialization functions + * + AES processing functions + * + DMA callback functions + * + CRYP IRQ handler management + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRYP HAL driver can be used in CRYP IP as follows: + + (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit(): + (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE() + (##) In case of using interrupts (e.g. HAL_CRYP_Encrypt_IT()) + (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority() + (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ() + (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler() + (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_Encrypt_DMA()) + (+++) Enable the DMAx interface clock using __RCC_DMAx_CLK_ENABLE() + (+++) Configure and enable two DMA streams one for managing data transfer from + memory to peripheral (input stream) and another stream for managing data + transfer from peripheral to memory (output stream) + (+++) Associate the initialized DMA handle to the CRYP DMA handle + using __HAL_LINKDMA() + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the two DMA Streams. The output stream should have higher + priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ() + + (#)Initialize the CRYP according to the specified parameters : + (##) The data type: 1-bit, 8-bit, 16-bit or 32-bit. + (##) The key size: 128, 192 or 256. + (##) The AlgoMode AES Algorithm ECB/CBC/CTR/GCM or CCM. + (##) The initialization vector (counter). It is not used in ECB mode. + (##) The key buffer used for encryption/decryption. + (##) The Header used only in AES GCM and CCM Algorithm for authentication. + (##) The HeaderSize used to give size of header buffer in words or bytes, depending upon + HeaderWidthUnit field. + (##) The HeaderWidthUnit field. It specifies whether the header length + (##) The HeaderSize The size of header buffer in word. + (##) The B0 block is the first authentication block used only in AES CCM mode. + + (#)Three processing (encryption/decryption) functions are available: + (##) Polling mode: encryption and decryption APIs are blocking functions + i.e. they process the data and wait till the processing is finished, + e.g. HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (##) Interrupt mode: encryption and decryption APIs are not blocking functions + i.e. they process the data under interrupt, + e.g. HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (##) DMA mode: encryption and decryption APIs are not blocking functions + i.e. the data transfer is ensured by DMA, + e.g. HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + + (#)When the processing function is called at first time after HAL_CRYP_Init() + the CRYP peripheral is configured and processes the buffer in input. + At second call, no need to Initialize the CRYP, user have to get current configuration via + HAL_CRYP_GetConfig() API, then only HAL_CRYP_SetConfig() is requested to set + new parameters, finally user can start encryption/decryption. + + (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral. + + (#)To process a single message with consecutive calls to HAL_CRYP_Encrypt() or HAL_CRYP_Decrypt() + without having to configure again the Key or the Initialization Vector between each API call, + the field KeyIVConfigSkip of the initialization structure must be set to CRYP_KEYIVCONFIG_ONCE. + Same is true for consecutive calls of HAL_CRYP_Encrypt_IT(), HAL_CRYP_Decrypt_IT(), + HAL_CRYP_Encrypt_DMA()or HAL_CRYP_Decrypt_DMA(). + + [..] + The cryptographic processor supports following standards: + (#) The advanced encryption standard (AES) supported by CRYP: + (##)128-bit data block processing + (##) chaining modes supported : + (+++) Electronic Code Book(ECB) + (+++) Cipher Block Chaining (CBC) + (+++) Counter mode (CTR) + (+++) Galois/counter mode (GCM/GMAC) + (+++) Counter with Cipher Block Chaining-Message(CCM) + (##) keys length Supported : + (+++) for CRYP1 IP: 128-bit, 192-bit and 256-bit. + + [..] This section describes the AES Galois/counter mode (GCM) supported by both CRYP1 IP: + (#) Algorithm supported : + (##) Galois/counter mode (GCM) + (##) Galois message authentication code (GMAC) :is exactly the same as + GCM algorithm composed only by an header. + (#) Four phases are performed in GCM : + (##) Init phase: IP prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: IP processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: IP processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: IP generates the authenticated tag (T) using the last block of data. + HAL_CRYPEx_AESGCM_GenerateAuthTAG API used in this phase to generate 4 words which correspond + to the Tag. user should consider only part of this 4 words, if Tag length is less than 128 bits. + (#) structure of message construction in GCM is defined as below : + (##) 16 bytes Initial Counter Block (ICB)composed of IV and counter + (##) The authenticated header A (also knows as Additional Authentication Data AAD) + this part of the message is only authenticated, not encrypted. + (##) The plaintext message P is both authenticated and encrypted as ciphertext. + GCM standard specifies that ciphertext has same bit length as the plaintext. + (##) The last block is composed of the length of A (on 64 bits) and the length of ciphertext + (on 64 bits) + + [..] This section describe The AES Counter with Cipher Block Chaining-Message + Authentication Code (CCM) supported by both CRYP IP: + (#) Specific parameters for CCM : + + (##) B0 block : According to NIST Special Publication 800-38C, + The first block B0 is formatted as follows, where l(m) is encoded in + most-significant-byte first order(see below table 3) + + (+++) Q: a bit string representation of the octet length of P (plaintext) + (+++) q The octet length of the binary representation of the octet length of the payload + (+++) A nonce (N), n The octet length of the where n+q=15. + (+++) Flags: most significant octet containing four flags for control information, + (+++) t The octet length of the MAC. + (##) B1 block (header) : associated data length(a) concatenated with Associated Data (A) + the associated data length expressed in bytes (a) defined as below: + (+++) If 0 < a < 216-28, then it is encoded as [a]16, i.e. two octets + (+++) If 216-28 < a < 232, then it is encoded as 0xff || 0xfe || [a]32, i.e. six octets + (+++) If 232 < a < 264, then it is encoded as 0xff || 0xff || [a]64, i.e. ten octets + (##) CTRx block : control blocks + (+++) Generation of CTR1 from first block B0 information : + equal to B0 with first 5 bits zeroed and most significant bits storing octet + length of P also zeroed, then incremented by one ( see below Table 4) + (+++) Generation of CTR0: same as CTR1 with bit[0] set to zero. + + (#) Four phases are performed in CCM for CRYP IP: + (##) Init phase: IP prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: IP processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: IP processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: IP generates the authenticated tag (T) using the last block of data. + HAL_CRYPEx_AESCCM_GenerateAuthTAG API used in this phase to generate 4 words which correspond to the Tag. + user should consider only part of this 4 words, if Tag length is less than 128 bits + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_CRYP_RegisterCallback() or HAL_CRYP_RegisterXXXCallback() + to register an interrupt callback. + + [..] + Function @ref HAL_CRYP_RegisterCallback() allows to register following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function @ref HAL_CRYP_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_CRYP_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + + [..] + By default, after the @ref HAL_CRYP_Init() and when the state is HAL_CRYP_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples @ref HAL_CRYP_InCpltCallback() , @ref HAL_CRYP_OutCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the @ref HAL_CRYP_Init()/ @ref HAL_CRYP_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the @ref HAL_CRYP_Init() / @ref HAL_CRYP_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_CRYP_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_CRYP_STATE_READY or HAL_CRYP_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_CRYP_RegisterCallback() before calling @ref HAL_CRYP_DeInit() + or @ref HAL_CRYP_Init() function. + + [..] + When The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + + Table 1. Initial Counter Block (ICB) + +-------------------------------------------------------+ + | Initialization vector (IV) | Counter | + |----------------|----------------|-----------|---------| + 127 95 63 31 0 + + + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] ICB[127:96] + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] ICB[63:32] + 31 ... 0 CRYP_IV0L[31:0] ICB[31:0], where 32-bit counter= 0x2 + + Table 2. GCM last block definition + + +-------------------------------------------------------------------+ + | Bit[0] | Bit[32] | Bit[64] | Bit[96] | + |-----------|--------------------|-----------|----------------------| + | 0x0 | Header length[31:0]| 0x0 | Payload length[31:0] | + |-----------|--------------------|-----------|----------------------| + + Table 3. B0 block + Octet Number Contents + ------------ --------- + 0 Flags + 1 ... 15-q Nonce N + 16-q ... 15 Q + + the Flags field is formatted as follows: + + Bit Number Contents + ---------- ---------------------- + 7 Reserved (always zero) + 6 Adata + 5 ... 3 (t-2)/2 + 2 ... 0 [q-1]3 + + Table 4. CTRx block + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] B0[127:96], where Q length bits are set to 0, except for + bit 0 that is set to 1 + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] B0[63:32] + 31 ... 0 CRYP_IV0L[31:0] B0[31:0], where flag bits set to 0 + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (CRYP) + +/** @defgroup CRYP CRYP + * @brief CRYP HAL module driver. + * @{ + */ + + +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Defines + * @{ + */ +#define CRYP_TIMEOUT_KEYPREPARATION 82U /* The latency of key preparation operation is 82 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMINITPHASE 299U /* The latency of GCM/CCM init phase to prepare hash subkey is + 299 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMHEADERPHASE 290U /* The latency of GCM/CCM header phase is 290 clock cycles.*/ + +#define CRYP_GENERAL_TIMEOUT 500U + +#define CRYP_PHASE_READY 0x00000001U /*!< CRYP peripheral is ready for initialization. */ +#define CRYP_PHASE_PROCESS 0x00000002U /*!< CRYP peripheral is in processing phase */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +#define CRYP_PHASE_HEADER_SUSPENDED 0x00000004U /*!< GCM/GMAC/CCM header phase is suspended */ +#define CRYP_PHASE_PAYLOAD_SUSPENDED 0x00000005U /*!< GCM/CCM payload phase is suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +#define CRYP_PHASE_HEADER_DMA_FEED 0x00000006U /*!< GCM/GMAC/CCM header is fed to the peripheral in + DMA mode */ + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1 /*!< GCM(/CCM) payload phase */ +#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH /*!< GCM/GMAC or CCM final phase */ +#endif /* USE_HAL_CRYP_ONLY */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +#define SAES_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define SAES_PHASE_HEADER SAES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define SAES_PHASE_PAYLOAD SAES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define SAES_PHASE_FINAL SAES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ +#endif /* USE_HAL_SAES_ONLY */ + +/* CTR1 information to use in CCM algorithm */ +#define CRYP_CCM_CTR1_0 0x07FFFFFFU +#define CRYP_CCM_CTR1_1 0xFFFFFF00U +#define CRYP_CCM_CTR1_2 0x00000001U + +#define IT_SUSPENDED 0x00000000U +#define DMA_SUSPENDED 0x00000001U + +#define ALGOMODE_CRYP_TO_CHMOD_SAES 0 +#define ALGOMODE_SAES_TO_CHMOD_CRYP 1 +/** + * @} + */ + + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Macros + * @{ + */ + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{MODIFY_REG(((CRYP_TypeDef *)((__HANDLE__)->Instance))->CR, \ + CRYP_CR_GCM_CCMPH, (__PHASE__)); \ + }while(0) +#endif /* USE_HAL_CRYP_ONLY */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +#define SAES_SET_PHASE(__HANDLE__, __PHASE__) do{MODIFY_REG(((SAES_TypeDef *)((__HANDLE__)->Instance))->CR, \ + SAES_CR_GCMPH, (__PHASE__)); \ + }while(0) +#endif /* USE_HAL_SAES_ONLY */ + +#define HAL_CRYP_FIFO_FLUSH(__HANDLE__) (((CRYP_TypeDef *)((__HANDLE__)->Instance))->CR |= CRYP_CR_FFLUSH) + + +/** + * @} + */ + +/* Private struct -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions_prototypes + * @{ + */ + +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAError(DMA_HandleTypeDef *hdma); +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize); +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp); +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcrypt, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp); +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +static HAL_StatusTypeDef CRYP_WaitOnIFEMFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_WaitOnOFNEFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +#endif /* USE_HAL_CRYP_ONLY */ +static HAL_StatusTypeDef CRYP_WaitOnBUSYFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +#endif /* USE_HAL_SAES_ONLY */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output); +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input); +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +static void CRYP_Read_ContextSwapRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output, uint32_t Algorithm); +#endif /* USE_HAL_CRYP_ONLY */ +static void CRYP_Write_ContextSwapRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t Algorithm); +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp); +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +static uint32_t CRYP_SAES_AlgoConversion(uint32_t algo, uint32_t order); +#endif /* USE_HAL_SAES_ONLY */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Functions CRYP Exported Functions + * @{ + */ + + +/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief CRYP Initialization and Configuration functions. + * +@verbatim + ======================================================================================== + ##### Initialization, de-initialization and Set and Get configuration functions ##### + ======================================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRYP + (+) DeInitialize the CRYP + (+) Initialize the CRYP MSP + (+) DeInitialize the CRYP MSP + (+) configure CRYP (HAL_CRYP_SetConfig) with the specified parameters in the CRYP_ConfigTypeDef + Parameters which are configured in This section are : + (++) Key size + (++) Data Type : 32, 16, 8 or 1 bit + ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard. + (+) Get CRYP configuration (HAL_CRYP_GetConfig) from the specified parameters in the CRYP_HandleTypeDef + + +@endverbatim + * @{ + */ + + +/** + * @brief Initializes the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef and creates the associated handle. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + +#if ((USE_HAL_CRYP_ONLY == 1) && (USE_HAL_SAES_ONLY == 0)) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + return HAL_ERROR; + } +#endif /* USE_HAL_CRYP_ONLY */ + +#if ((USE_HAL_CRYP_ONLY == 0) && (USE_HAL_SAES_ONLY == 1)) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + return HAL_ERROR; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Check parameters */ +#ifdef USE_FULL_ASSERT +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize)); + assert_param(IS_CRYP_ALGORITHM(hcryp->Init.Algorithm)); + assert_param(IS_CRYP_KEYMODE(hcryp->Init.KeyMode)); + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_BYTE) + { + return HAL_ERROR; /* CRYP does not support BYTE as header width unit */ + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + assert_param(IS_SAES_KEYSIZE(hcryp->Init.KeySize)); + assert_param(IS_SAES_ALGORITHM(hcryp->Init.Algorithm)); + assert_param(IS_SAES_KEYMODE(hcryp->Init.KeyMode)); + assert_param(IS_SAES_KEYSEL(hcryp->Init.KeySelect)); + } +#endif /* USE_HAL_SAES_ONLY */ + assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType)); + assert_param(IS_CRYP_INIT(hcryp->Init.KeyIVConfigSkip)); +#endif /* USE_FULL_ASSERT */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy InCpltCallback */ + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy OutCpltCallback */ + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy ErrorCallback */ + + if (hcryp->MspInitCallback == NULL) + { + hcryp->MspInitCallback = HAL_CRYP_MspInit; /* Legacy MspInit */ + } + + /* Init the low level hardware */ + hcryp->MspInitCallback(hcryp); + } +#else + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_CRYP_MspInit(hcryp); + } +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /* Set the key size, data type and algorithm */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, + CRYP_CR_KMOD | CRYP_CR_DATATYPE | CRYP_CR_KEYSIZE | CRYP_CR_ALGOMODE, + hcryp->Init.KeyMode | hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Wait for BUSY flag to go to 0 */ + if (CRYP_WaitOnBUSYFlag(hcryp, CRYP_GENERAL_TIMEOUT) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, + SAES_CR_KEYSEL | SAES_CR_KMOD | SAES_CR_DATATYPE | SAES_CR_KEYSIZE | SAES_CR_CHMOD, + hcryp->Init.KeySelect | hcryp->Init.KeyMode | SAES_CONV_DATATYPE(hcryp->Init.DataType) | \ + SAES_CONV_KEYSIZE(hcryp->Init.KeySize) | CRYP_SAES_AlgoConversion(hcryp->Init.Algorithm, + ALGOMODE_CRYP_TO_CHMOD_SAES)); + } +#endif /* USE_HAL_CRYP_ONLY */ + + /* Read Device ID to indicate CRYP1 IP Version */ + hcryp->Version = HAL_GetREVID(); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Reset peripheral Key and IV configuration flag */ + hcryp->KeyIVConfig = 0U; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief De-Initializes the CRYP peripheral. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + +#if ((USE_HAL_CRYP_ONLY == 1) && (USE_HAL_SAES_ONLY == 0)) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + return HAL_ERROR; + } +#endif /* USE_HAL_CRYP_ONLY */ + +#if ((USE_HAL_CRYP_ONLY == 0) && (USE_HAL_SAES_ONLY == 1)) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + return HAL_ERROR; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Reset CrypInCount and CrypOutCount */ + hcryp->CrypInCount = 0; + hcryp->CrypOutCount = 0; + hcryp->CrypHeaderCount = 0; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + if (hcryp->MspDeInitCallback == NULL) + { + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; /* Legacy MspDeInit */ + } + /* DeInit the low level hardware */ + hcryp->MspDeInitCallback(hcryp); + +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_CRYP_MspDeInit(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef + * @param hcryp: pointer to a CRYP_HandleTypeDef structure + * @param pConf: pointer to a CRYP_ConfigTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ +#ifdef USE_FULL_ASSERT +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + assert_param(IS_CRYP_KEYSIZE(pConf->KeySize)); + assert_param(IS_CRYP_ALGORITHM(pConf->Algorithm)); + assert_param(IS_CRYP_KEYMODE(pConf->KeyMode)); + if (pConf->HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_BYTE) + { + return HAL_ERROR; /* CRYP does not support BYTE as header width unit */ + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + assert_param(IS_SAES_KEYSIZE(pConf->KeySize)); + assert_param(IS_SAES_ALGORITHM(pConf->Algorithm)); + assert_param(IS_SAES_KEYMODE(pConf->KeyMode)); + assert_param(IS_SAES_KEYSEL(pConf->KeySelect)); + } +#endif /* USE_HAL_SAES_ONLY */ + assert_param(IS_CRYP_DATATYPE(pConf->DataType)); + assert_param(IS_CRYP_INIT(pConf->KeyIVConfigSkip)); +#endif /* USE_FULL_ASSERT */ + + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Set CRYP parameters */ + hcryp->Init.DataType = pConf->DataType; + hcryp->Init.pKey = pConf->pKey; + hcryp->Init.Algorithm = pConf->Algorithm; + hcryp->Init.KeySize = pConf->KeySize; + hcryp->Init.pInitVect = pConf->pInitVect; + hcryp->Init.Header = pConf->Header; + hcryp->Init.HeaderSize = pConf->HeaderSize; + hcryp->Init.B0 = pConf->B0; + hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; + hcryp->Init.HeaderWidthUnit = pConf->HeaderWidthUnit; + hcryp->Init.KeyMode = pConf->KeyMode; + hcryp->Init.KeyIVConfigSkip = pConf->KeyIVConfigSkip; + hcryp->Init.KeySelect = pConf->KeySelect; + + /* Set the key size, data type, algo Mode and operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_DATATYPE | CRYP_CR_KEYSIZE | CRYP_CR_ALGOMODE, + hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /*in case of HSW, HW, SW or AHK key selection, we should specify Key mode selection (SAES_CR_KMOD) */ + if ((hcryp->Init.KeySelect != CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_WRAPPED)) + { + /* Set key mode selection (Normal, Wrapped or Shared key )*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_WRAPPED); + } + + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, \ + SAES_CR_KEYSEL | SAES_CR_KMOD | SAES_CR_DATATYPE | SAES_CR_KEYSIZE | SAES_CR_CHMOD, + hcryp->Init.KeySelect | hcryp->Init.KeyMode | SAES_CONV_DATATYPE(hcryp->Init.DataType) | \ + SAES_CONV_KEYSIZE(hcryp->Init.KeySize) | CRYP_SAES_AlgoConversion(hcryp->Init.Algorithm, + ALGOMODE_CRYP_TO_CHMOD_SAES)); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Get CRYP Configuration parameters in associated handle. + * @param pConf: pointer to a CRYP_ConfigTypeDef structure + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Get CRYP parameters */ + pConf->DataType = hcryp->Init.DataType; + pConf->pKey = hcryp->Init.pKey; + pConf->Algorithm = hcryp->Init.Algorithm; + pConf->KeySize = hcryp->Init.KeySize ; + pConf->pInitVect = hcryp->Init.pInitVect; + pConf->Header = hcryp->Init.Header ; + pConf->HeaderSize = hcryp->Init.HeaderSize; + pConf->B0 = hcryp->Init.B0; + pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; + pConf->HeaderWidthUnit = hcryp->Init.HeaderWidthUnit; + pConf->KeyMode = hcryp->Init.KeyMode; + pConf->KeySelect = hcryp->Init.KeySelect; + pConf->KeyIVConfigSkip = hcryp->Init.KeyIVConfigSkip; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} +/** + * @brief Initializes the CRYP MSP. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes CRYP MSP. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User CRYP Callback + * To be used instead of the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Rx Half Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, + pCRYP_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = pCallback; + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = pCallback; + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = pCallback; + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} + +/** + * @brief Unregister an CRYP Callback + * CRYP callback is redirected to the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Rx Half Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy InCpltCallback */ + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy OutCpltCallback */ + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy ErrorCallback */ + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK;; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief Request CRYP processing suspension when in interruption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @note Set the handle field SuspendRequest to the appropriate value so that + * the on-going CRYP processing is suspended as soon as the required + * conditions are met. + * @note HAL_CRYP_ProcessSuspend() can only be invoked when the processing is done + * in non-blocking interrupt mode. + * @retval None + */ +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp) +{ + /* Set Handle SuspendRequest field */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND; +} + +/** + * @brief Request CRYP processing suspension when in DMA mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @note Set the handle field SuspendRequest to the appropriate value so that + * the on-going CRYP processing is suspended as soon as the required + * conditions are met. + * @note HAL_CRYP_ProcessSuspend() can only be invoked when the processing is done + * in non-blocking DMA mode. + * @retval None + */ +HAL_StatusTypeDef HAL_CRYP_DMAProcessSuspend(CRYP_HandleTypeDef *hcryp) +{ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; +#endif /* USE_HAL_SAES_ONLY */ + uint32_t tmp_remaining_DMATransferSize_inWords; + uint32_t tmp_initial_DMATransferSize_inWords; + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Stop the DMA transfers to the IN FIFO by clearing to 0 the DIEN bit in + the CRYP_DMACR register */ + ((CRYP_TypeDef *)(hcryp->Instance))->DMACR &= (~CRYP_DMACR_DIEN); + + /* Wait until both the IN and the OUT FIFOs are empty (IFEM=1 and OFNE=0 in the + CRYP_SR) and the BUSY bit is cleared */ + while (((((CRYP_TypeDef *)(hcryp->Instance))->SR) & (CRYP_SR_IFEM | CRYP_SR_OFNE | CRYP_SR_BUSY)) != CRYP_SR_IFEM) + { + /* nothing todo */ + } + + /* Stop the DMA transfers from the OUT FIFO by clearing to 0 the DOEN + bit in the CRYP_DMACR register */ + ((CRYP_TypeDef *)(hcryp->Instance))->DMACR &= (~CRYP_DMACR_DOEN); + + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Stop the DMA transfer to the IN FIFO by clearing the DMAINEN bit of the SAES_CR register */ + (((SAES_TypeDef *)(hcryp->Instance)))->CR &= (~SAES_CR_DMAINEN); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /*Call registered error callback*/ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Stop the DMA transfer from the OUT FIFO by clearing the DMAOUTEN bit of the SAES_CR register */ + ((SAES_TypeDef *)(hcryp->Instance))->CR &= (~SAES_CR_DMAOUTEN); + + /* Clear the CCF flag by setting the CCF bit of the SAES_ICR register */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* At this point, DMA interface is disabled and no transfer is on-going */ + /* Retrieve from the DMA handle how many words remain to be read and written */ + /* DMA3 used, DMA_CBR1_BNDT in bytes, DMA_CSR_FIFOL in words */ + tmp_remaining_DMATransferSize_inWords = ((((DMA_Channel_TypeDef *)hcryp->hdmain->Instance)->CBR1) & \ + DMA_CBR1_BNDT) / 4U; + tmp_remaining_DMATransferSize_inWords += ((((DMA_Channel_TypeDef *)hcryp->hdmain->Instance)->CSR) & \ + DMA_CSR_FIFOL) >> DMA_CSR_FIFOL_Pos; + + /* Disable DMA channels */ + /* Note that the Abort function will + - Clear the transfer error flags + - Unlock + - Set the State + */ + if (HAL_DMA_Abort(hcryp->hdmain) != HAL_OK) + { + return HAL_ERROR; + } + if (HAL_DMA_Abort(hcryp->hdmaout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Compute how many words were supposed to be transferred by DMA */ + /* hcryp->CrypInCount is in bytes, must be a multiple of 4 (no padding handled for ECB or CBC) */ + tmp_initial_DMATransferSize_inWords = ((uint32_t) hcryp->Size / 4U); + + /* Accordingly, update the input and output pointers that points at the next word to be + transferred to the Peripheral by DMA or read from the Peripheral by the DMA */ + hcryp->pCrypInBuffPtr += (tmp_initial_DMATransferSize_inWords - tmp_remaining_DMATransferSize_inWords) ; + hcryp->pCrypOutBuffPtr += (tmp_initial_DMATransferSize_inWords - tmp_remaining_DMATransferSize_inWords) ; + + /* And store in CrypInCount the remaining size to transfer (in words) */ + hcryp->CrypInCount = (uint16_t)tmp_remaining_DMATransferSize_inWords; + hcryp->CrypOutCount = (uint16_t)tmp_remaining_DMATransferSize_inWords; + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + + return HAL_OK; + +} + + +/** + * @brief CRYP processing suspension and peripheral internal parameters storage. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note peripheral internal parameters are stored to be readily available when + * suspended processing is resumed later on. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) +{ + HAL_CRYP_STATETypeDef state; + uint32_t tmp_SAES_CR_DMAIN_bit; + + /* Request suspension */ + /* Check whether the processing is in DMA mode or not */ + tmp_SAES_CR_DMAIN_bit = (((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_DMAINEN); + if ((((((CRYP_TypeDef *)(hcryp->Instance))->DMACR & CRYP_DMACR_DIEN) == CRYP_DMACR_DIEN) \ + && (IS_CRYP_INSTANCE(hcryp->Instance))) || \ + ((tmp_SAES_CR_DMAIN_bit == SAES_CR_DMAINEN) && (IS_SAES_INSTANCE(hcryp->Instance)))) + { + if (HAL_CRYP_DMAProcessSuspend(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + hcryp->SuspendedProcessing = DMA_SUSPENDED; + } + else + { + HAL_CRYP_ProcessSuspend(hcryp); + hcryp->SuspendedProcessing = IT_SUSPENDED; + } + + do + { + state = HAL_CRYP_GetState(hcryp); + } while ((state != HAL_CRYP_STATE_SUSPENDED) && (state != HAL_CRYP_STATE_READY)); + + /* Make sure there is no unwanted suspension */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + if (HAL_CRYP_GetState(hcryp) == HAL_CRYP_STATE_READY) + { + /* Processing was already over or was about to end. No suspension done */ + return HAL_ERROR; + } + else + { + if ((hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR) || \ + (hcryp->Init.Algorithm == CRYP_AES_GCM) || \ + (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + /* Save Initialisation Vector registers */ + CRYP_Read_IVRegisters(hcryp, hcryp->IV_saved); + } + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Save Control register */ + hcryp->CR_saved = ((CRYP_TypeDef *)(hcryp->Instance))->CR; + + /* Save context swap registers */ + if ((hcryp->Init.Algorithm == CRYP_AES_GCM) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + CRYP_Read_ContextSwapRegisters(hcryp, hcryp->SUSPxR_saved, hcryp->Init.Algorithm); + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Disable AES */ + __HAL_CRYP_DISABLE(hcryp); + + /* Clear keys */ + ((SAES_TypeDef *)(hcryp->Instance))->KEYR7 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR6 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR5 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR4 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR3 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR2 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR1 = 0x0U; + ((SAES_TypeDef *)(hcryp->Instance))->KEYR0 = 0x0U; + + /* Save Control register */ + hcryp->CR_saved = ((SAES_TypeDef *)(hcryp->Instance))->CR; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Save low-priority block CRYP handle parameters */ + hcryp->Init_saved = hcryp->Init; + hcryp->pCrypInBuffPtr_saved = hcryp->pCrypInBuffPtr; + hcryp->pCrypOutBuffPtr_saved = hcryp->pCrypOutBuffPtr; + hcryp->CrypInCount_saved = hcryp->CrypInCount; + hcryp->CrypOutCount_saved = hcryp->CrypOutCount; + hcryp->Phase_saved = hcryp->Phase; + hcryp->State_saved = hcryp->State; + hcryp->Size_saved = ((hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? \ + (hcryp->Size / 4U) : hcryp->Size); + hcryp->SizesSum_saved = hcryp->SizesSum; + hcryp->CrypHeaderCount_saved = hcryp->CrypHeaderCount; + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + } + return HAL_OK; +} + + +/** + * @brief CRYP processing resumption. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note Processing restarts at the exact point where it was suspended, based + * on the parameters saved at suspension time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + if (hcryp->State_saved != HAL_CRYP_STATE_SUSPENDED) + { + /* CRYP was not suspended */ + return HAL_ERROR; + } + else + { + /* Restore low-priority block CRYP handle parameters */ + hcryp->Init = hcryp->Init_saved; + hcryp->State = hcryp->State_saved; + hcryp->Phase = hcryp->Phase_saved; + hcryp->CrypHeaderCount = hcryp->CrypHeaderCount_saved; + + /* Restore low-priority block CRYP handle parameters */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + hcryp->Init.pInitVect = hcryp->IV_saved; + } + /* Set State to reset to trigger a HAL_CRYP_MspInit() call in HAL_CRYP_Init() */ + __HAL_CRYP_RESET_HANDLE_STATE(hcryp); +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR |= CRYP_CR_IPRST; + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= (~CRYP_CR_IPRST); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->CR |= SAES_CR_IPRST; + ((SAES_TypeDef *)(hcryp->Instance))->CR &= (~SAES_CR_IPRST); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Peripheral must be disabled */ + __HAL_CRYP_DISABLE(hcryp); + + if ((hcryp->Init.Algorithm == CRYP_AES_ECB) || \ + (hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + (void) HAL_CRYP_Init(hcryp); + } + else + { + /* The following lines are applicable to CRYP peripheral only */ + + /* Configure again the cryptographic processor with the initial setting in CRYP_CR */ + ((CRYP_TypeDef *)(hcryp->Instance))->CR = hcryp->CR_saved; + + /* Configure again the key registers */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Restore context swap registers */ + CRYP_Write_ContextSwapRegisters(hcryp, hcryp->SUSPxR_saved, hcryp->Init.Algorithm); + + /* Restore IV registers */ + CRYP_Write_IVRegisters(hcryp, hcryp->IV_saved); + + /* At the same time, set handle state back to READY to be able to resume the AES calculations + without the processing APIs returning HAL_BUSY when called. */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + if (hcryp->SuspendedProcessing == DMA_SUSPENDED) + { + if (((IS_CRYP_INSTANCE(hcryp->Instance)) && \ + (READ_BIT(hcryp->CR_saved, CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_ENCRYPT)) || \ + ((IS_SAES_INSTANCE(hcryp->Instance)) && \ + (READ_BIT(hcryp->CR_saved, SAES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT))) + { + if (HAL_CRYP_Encrypt_DMA(hcryp, hcryp->pCrypInBuffPtr_saved, (uint16_t) hcryp->CrypInCount_saved, + hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (HAL_CRYP_Decrypt_DMA(hcryp, hcryp->pCrypInBuffPtr_saved, (uint16_t) hcryp->CrypInCount_saved, + hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + } + else + { + /* Resume low-priority block processing under IT */ + hcryp->ResumingFlag = 1U; + + if (((IS_CRYP_INSTANCE(hcryp->Instance)) && + (READ_BIT(hcryp->CR_saved, CRYP_CR_ALGODIR) == CRYP_OPERATINGMODE_ENCRYPT)) || \ + ((IS_SAES_INSTANCE(hcryp->Instance)) && \ + (READ_BIT(hcryp->CR_saved, SAES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT))) + { + if (HAL_CRYP_Encrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, + hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (HAL_CRYP_Decrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, + hcryp->Size_saved, hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group2 Encrypt Decrypt functions + * @brief CRYP processing functions. + * +@verbatim + ============================================================================== + ##### Encrypt Decrypt functions ##### + ============================================================================== + [..] This section provides API allowing to Encrypt/Decrypt Data following + Standard AES algorithm configured by the user: + + (+) Standard AES supported by CRYP1 IP, list of Algorithm supported: + (++) Electronic Code Book(ECB) + (++) Cipher Block Chaining (CBC) + (++) Counter mode (CTR) + (++) Cipher Block Chaining (CBC) + (++) Counter mode (CTR) + (++) Galois/counter mode (GCM) + (++) Counter with Cipher Block Chaining-Message(CCM) + [..] Three processing functions are available: + (+) Polling mode : HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (+) Interrupt mode : HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (+) DMA mode : HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + +@endverbatim + * @{ + */ + + +/** + * @brief Encryption mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (plaintext) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit. + * @param Output: Pointer to the output buffer(ciphertext) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout) +{ + uint32_t algo = 0U; + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set Encryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES encryption */ + status = CRYP_AES_Encrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout); + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status ; +} + +/** + * @brief Decryption mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (ciphertext ) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit + * @param Output: Pointer to the output buffer(plaintext) + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t algo = 0U; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set Decryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in interrupt mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (plaintext) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit + * @param Output: Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + uint32_t algo = 0U; + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set encryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + status = CRYP_AES_Encrypt_IT(hcryp); + break; + + case CRYP_AES_GCM: + + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status ; +} + +/** + * @brief Decryption in interrupt mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (ciphertext ) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit + * @param Output: Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + uint32_t algo = 0U; + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_IT(hcryp); + break; + + case CRYP_AES_GCM: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCMdecryption */ + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in DMA mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (plaintext) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit + * @param Output: Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t algo = 0U; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t tickstart; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set Encryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_KEYVALID) == 0x0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > CRYP_GENERAL_TIMEOUT) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + + /* Set the Initialization Vector*/ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_SAES_ONLY */ + } + + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Start DMA process transfer for AES */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), hcryp->Size, (uint32_t)(hcryp->pCrypOutBuffPtr)); + break; + + case CRYP_AES_GCM: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process_DMA(hcryp); + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption in DMA mode. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input: Pointer to the input buffer (ciphertext ) + * @param Size: Length of the plaintext buffer either in word or in byte, according to DataWidthUnit + * @param Output: Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + uint32_t algo = 0U; + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGODIR, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGOMODE; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + + /* algo get algorithm selected */ + algo = CRYP_SAES_AlgoConversion((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_CHMOD), + ALGOMODE_SAES_TO_CHMOD_CRYP); + } +#endif /* USE_HAL_SAES_ONLY */ + + switch (algo) + { + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_DMA(hcryp); + break; + + case CRYP_AES_GCM: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_DMA(hcryp); + + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group3 CRYP IRQ handler management + * @brief CRYP IRQ handler. + * +@verbatim + ============================================================================== + ##### CRYP IRQ handler management ##### + ============================================================================== +[..] This section provides CRYP IRQ handler and callback functions. + (+) HAL_CRYP_IRQHandler CRYP interrupt request + (+) HAL_CRYP_InCpltCallback input data transfer complete callback + (+) HAL_CRYP_OutCpltCallback output data transfer complete callback + (+) HAL_CRYP_ErrorCallback CRYP error callback + (+) HAL_CRYP_GetState return the CRYP state + (+) HAL_CRYP_GetError return the CRYP error code +@endverbatim + * @{ + */ + +/** + * @brief This function handles cryptographic interrupt request. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) +{ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + uint32_t itstatus = ((CRYP_TypeDef *)(hcryp->Instance))->MISR; + + if ((itstatus & (CRYP_IT_INI | CRYP_IT_OUTI)) != 0U) + { + if ((hcryp->Init.Algorithm == CRYP_AES_ECB) || (hcryp->Init.Algorithm == CRYP_AES_CBC) + || (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + CRYP_AES_IT(hcryp); /*AES*/ + } + + else if ((hcryp->Init.Algorithm == CRYP_AES_GCM) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + /* if header phase */ + if ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_PHASE_HEADER) == CRYP_PHASE_HEADER) + { + CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); + } + else /* if payload phase */ + { + CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); + } + } + else + { + /* Nothing to do */ + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Check if Read or write error occurred */ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_RWEIE) != RESET) + { + /* If write Error occurred */ + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_WRERR) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_WRITE; + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_RWEIF); + } + /* If read Error occurred */ + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_RDERR) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_READ; + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_RWEIF); + } + /*Call error callback*/ + HAL_CRYP_ErrorCallback(hcryp); + } + /* Check if Key error occurred */ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_KEIE) != RESET) + { + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_KEIF) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_KEY; + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_KEIF); + /*Call error callback*/ + HAL_CRYP_ErrorCallback(hcryp); + } + } + /* Check if RNG error occurred */ + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_RNGEIE) != RESET) + { + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_RNGEIF) != RESET) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_RNG; + /*Call error callback*/ + HAL_CRYP_ErrorCallback(hcryp); + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_RNGEIF); + } + } + if (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_CCF) != RESET) + { + if (__HAL_CRYP_GET_IT_SOURCE(hcryp, CRYP_IT_CCFIE) != RESET) + { + /* Clear computation complete flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + if ((hcryp->Init.Algorithm == CRYP_AES_GCM) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + /* if header phase */ + if ((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_PHASE_HEADER) == SAES_PHASE_HEADER) + { + CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); + } + else /* if payload phase */ + { + CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); + } + } + else /* AES Algorithm ECB,CBC or CTR*/ + { + CRYP_AES_IT(hcryp); + } + } + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ +} + +/** + * @brief Return the CRYP error code. + * @param hcryp : pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for the CRYP IP + * @retval CRYP error code + */ +uint32_t HAL_CRYP_GetError(const CRYP_HandleTypeDef *hcryp) +{ + return hcryp->ErrorCode; +} + +/** + * @brief Returns the CRYP state. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL state + */ +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(const CRYP_HandleTypeDef *hcryp) +{ + return hcryp->State; +} + +/** + * @brief Input FIFO transfer completed callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_InCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output FIFO transfer completed callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_OutCpltCallback could be implemented in the user file + */ +} + +/** + * @brief CRYP error callback. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CRYP_ErrorCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions + * @{ + */ + + +/** + * @brief Encryption in ECB/CBC & CTR Algorithm with AES Standard + * @param hcryp: pointer to a CRYP_HandleTypeDef structure + * @param Timeout: specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t tickstart; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_KEYVALID) == 0x0U) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.KeyMode == CRYP_KEYMODE_SHARED) + { + /* As KEYVALID is set, the key share target peripheral is initialized with a valid, shared key. + The application can proceed with the processing of data, setting KMOD[1:0]to 00 */ + CLEAR_BIT(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_KMOD); + } + } +#endif /* USE_HAL_CRYP_ONLY */ + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_SAES_ONLY */ + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + while ((hcryp->CrypInCount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain Ddta and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t tickstart; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_CRYP_GET_FLAG(hcryp, CRYP_FLAG_KEYVALID) == 0x0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > CRYP_GENERAL_TIMEOUT) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.KeyMode == CRYP_KEYMODE_SHARED) + { + /* As KEYVALID is set, the key share target peripheral is initialized with a valid, shared key. + The application can proceed with the processing of data, setting KMOD[1:0]to 00 */ + CLEAR_BIT(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_KMOD); + } + } +#endif /* USE_HAL_CRYP_ONLY */ + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_SAES_ONLY */ + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Enable interrupts */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE | CRYP_IT_RNGEIE); + } +#endif /* USE_HAL_SAES_ONLY */ + } + else + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard + * @param hcryp: pointer to a CRYP_HandleTypeDef structure + * @param Timeout: Specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) /*ECB or CBC*/ + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* change ALGOMODE to key preparation for decryption*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, CRYP_AES_KEY); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + } + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for BUSY flag go to 0 */ + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Turn back to ALGOMODE of the configuration */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* When KMOD[1:0] = 01 (wrapped key) or KMOD[1:0] = 01 (shared key) + and MODE[1:0] = 10 (decryption), then a read access to + SAES_DOUTR register triggers a read error (RDERR). So, clear KMOD for the upcoming deciphering */ + if (((((SAES_TypeDef *)(hcryp->Instance))->CR) & (CRYP_KEYMODE_WRAPPED | CRYP_KEYMODE_SHARED)) != 0U) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_NORMAL); + } + /* key preparation for decryption, operating mode 2*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_KEY_DERIVATION); + + /* we should re-write Key, in the case where we change key after first operation*/ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + } + + /* Enable SAES */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* End of Key preparation for ECB/CBC */ + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } + else /*Algorithm CTR */ + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } +#endif /* USE_HAL_SAES_ONLY */ + } + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_SAES_ONLY */ + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + while ((hcryp->CrypInCount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* change ALGOMODE to key preparation for decryption*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, CRYP_AES_KEY); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for BUSY flag go to 0 */ + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Turn back to ALGOMODE of the configuration */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* When KMOD[1:0] = 01 (wrapped key) or KMOD[1:0] = 01 (shared key) + and MODE[1:0] = 10 (decryption), then a read access to + SAES_DOUTR register triggers a read error (RDERR). So, clear KMOD for the upcoming deciphering */ + if (((((SAES_TypeDef *)(hcryp->Instance))->CR) & (CRYP_KEYMODE_WRAPPED | CRYP_KEYMODE_SHARED)) != 0U) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_NORMAL); + } + /* key preparation for decryption, operating mode 2*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_KEY_DERIVATION); + + /* we should re-write Key, in the case where we change key after first operation*/ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + } + + /* Enable SAES */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* End of Key preparation for ECB/CBC */ + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } + else /*Algorithm CTR */ + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } +#endif /* USE_HAL_SAES_ONLY */ + } /* if (hcryp->Init.Algorithm != CRYP_AES_CTR) */ + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_SAES_ONLY */ + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + if (hcryp->Size != 0U) + { + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Enable interrupts */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE | CRYP_IT_RNGEIE); + } +#endif /* USE_HAL_SAES_ONLY */ + } + else + { + /* Process locked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using DMA mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + if (hcryp->Init.Algorithm != CRYP_AES_CTR) /*ECB or CBC*/ + { + /* Key preparation for ECB/CBC */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* change ALGOMODE to key preparation for decryption*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, CRYP_AES_KEY); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for BUSY flag go to 0 */ + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Turn back to ALGOMODE of the configuration */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_ALGOMODE, hcryp->Init.Algorithm); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* When KMOD[1:0] = 01 (wrapped key) or KMOD[1:0] = 01 (shared key) + and MODE[1:0] = 10 (decryption), then a read access to + SAES_DOUTR register triggers a read error (RDERR). So, clear KMOD for the upcoming deciphering */ + if (((((SAES_TypeDef *)(hcryp->Instance))->CR) & (CRYP_KEYMODE_WRAPPED | CRYP_KEYMODE_SHARED)) != 0U) + { + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_NORMAL); + } + /* key preparation for decryption, operating mode 2*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_KEY_DERIVATION); + + /* we should re-write Key, in the case where we change key after first operation*/ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + } + + /* Enable SAES */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* End of Key preparation for ECB/CBC */ + /* Return to decryption operating mode(Mode 3) */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } + else /*Algorithm CTR */ + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } +#endif /* USE_HAL_SAES_ONLY */ + } + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } +#endif /* IS_SAES_INSTANCE */ + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + /* Start DMA process transfer for AES */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), hcryp->Size, (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DMA CRYP input data process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit + in the DMACR register */ + ((CRYP_TypeDef *)(hcryp->Instance))->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Disable the DMA transfer for input FIFO request by resetting the DMAINEN bit + in the CR register */ + ((SAES_TypeDef *)(hcryp->Instance))->CR &= (uint32_t)(~SAES_CR_DMAINEN); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Call input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA CRYP output data process complete callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) +{ + uint32_t count; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp; /* Temporary CrypOutBuff */ + uint32_t mode; + + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + + /* Disable the DMA transfer for output FIFO */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->CR &= (uint32_t)(~SAES_CR_DMAOUTEN); + + /* Disable the DMA transfer for output FIFO request by resetting + the DOEN bit in the DMACR register */ + CLEAR_BIT(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_DMAOUTEN); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Last block transfer in case of GCM or CCM with Size not %16 */ + /* Applicable to CRYP peripheral only */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if (((hcryp->Size) % 16U) != 0U) + { + /* set CrypInCount and CrypOutCount to exact number of word already computed via DMA */ + hcryp->CrypInCount = (hcryp->Size / 16U) * 4U; + hcryp->CrypOutCount = hcryp->CrypInCount; + + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); + + /* Case of AES GCM payload encryption or AES CCM payload decryption to get right tag */ + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Disable the CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20); + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + /* Write the last input block in the IN FIFO */ + for (count = 0U; count < lastwordsize; count ++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + /* Pad the data with zeros to have a complete block */ + while (count < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + count++; + } + /* Wait for OFNE flag to be raised */ + count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_OFNE)); + + /*Read the output block from the output FIFO */ + for (count = 0U; count < 4U; count++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp; + hcryp->CrypOutCount++; + } + } /*End of last block transfer in case of GCM or CCM */ + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + temp = 0; + /* Last block transfer in case of GCM or CCM with Size not %16*/ + if (((hcryp->Size) % 16U) != 0U) + { + /* set CrypInCount and CrypOutCount to exact number of words already computed via DMA */ + hcryp->CrypInCount = (hcryp->Size / 16U) * 4U; + hcryp->CrypOutCount = hcryp->CrypInCount; + + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (count = 0U; count < lastwordsize; count++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (count < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + count++; + } + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /*Read the output block from the output FIFO */ + for (count = 0U; count < 4U; count++) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer */ + temp = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + + count = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (count < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp; + hcryp->CrypOutCount++; + count++; + } + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + + if (((hcryp->Init.Algorithm & CRYP_AES_GCM) != CRYP_AES_GCM) + && ((hcryp->Init.Algorithm & CRYP_AES_CCM) != CRYP_AES_CCM)) + { + /* Disable CRYP (not allowed in GCM) */ + __HAL_CRYP_DISABLE(hcryp); + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA CRYP communication error callback. + * @param hdma: DMA handle + * @retval None + */ +static void CRYP_DMAError(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief Set the DMA configuration and start the DMA transfer + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr: address of the input buffer + * @param Size: size of the input buffer, must be a multiple of 16. + * @param outputaddr: address of the output buffer + * @retval None + */ +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr) +{ + HAL_StatusTypeDef status; + uint32_t peripheral_in_address = 0U; + uint32_t peripheral_out_address = 0U; + + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt; + + /* Set the DMA output error callback */ + hcryp->hdmaout->XferErrorCallback = CRYP_DMAError; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + peripheral_in_address = (uint32_t) &((CRYP_TypeDef *)(hcryp->Instance))->DIN; + peripheral_out_address = (uint32_t) &((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + peripheral_in_address = (uint32_t) &((SAES_TypeDef *)(hcryp->Instance))->DINR; + peripheral_out_address = (uint32_t) &((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Enable the DMA input channel */ + if ((hcryp->hdmain->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hcryp->hdmain->LinkedListQueue != NULL) && (hcryp->hdmain->LinkedListQueue->Head != NULL)) + { + /* Enable the DMA channel */ + hcryp->hdmain->LinkedListQueue->Head->\ + LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = Size; /* Set DMA data size */ + hcryp->hdmain->LinkedListQueue->Head->\ + LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = inputaddr; /* Set DMA source address */ + hcryp->hdmain->LinkedListQueue->Head->\ + LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = peripheral_in_address; /* Set DMA destination address */ + + status = HAL_DMAEx_List_Start_IT(hcryp->hdmain); + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, peripheral_in_address, Size); + } + + if (status != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Enable the DMA output channel */ + if ((hcryp->hdmaout->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hcryp->hdmaout->LinkedListQueue != NULL) && (hcryp->hdmaout->LinkedListQueue->Head != NULL)) + { + /* Enable the DMA channel */ + hcryp->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = \ + Size; /* Set DMA data size */ + hcryp->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = \ + peripheral_out_address; /* Set DMA source address */ + hcryp->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = \ + outputaddr; /* Set DMA destination address */ + + status = HAL_DMAEx_List_Start_IT(hcryp->hdmaout); + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hcryp->hdmaout, peripheral_out_address, outputaddr, Size); + } + + if (status != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Enable In/Out DMA request */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DMACR = (CRYP_DMACR_DOEN | CRYP_DMACR_DIEN); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->CR |= (SAES_CR_DMAINEN | SAES_CR_DMAOUTEN); + } +#endif /* USE_HAL_SAES_ONLY */ +} + +/** + * @brief Process Data: Write Input data in polling mode and used in AES functions. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout: Specify Timeout value + * @retval None + */ +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + + uint32_t temp[4]; /* Temporary CrypOutBuff */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ +#endif /* USE_HAL_CRYP_ONLY */ + uint32_t i; + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /*Temporary CrypOutCount Value */ + incount = hcryp->CrypInCount; + + if (((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_IFNF) != 0x0U) && (incount < ((hcryp->Size) / 4U))) + { + /* Write the input block in the IN FIFO */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Wait for OFNE flag to be raised */ + if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + if (((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) && (outcount < ((hcryp->Size) / 4U))) + { + /* Read the output block from the Output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + i = 0U; + while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /*Call registered error callback*/ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ +} + +/** + * @brief Handle CRYP block input/output data handling under interruption. + * @note The function is called under interruption only, once + * interruptions have been enabled by HAL_CRYP_Encrypt_IT or HAL_CRYP_Decrypt_IT. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL status + */ +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t temp[4]; /* Temporary CrypOutBuff */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ +#endif /* USE_HAL_CRYP_ONLY */ + uint32_t i; + + if (hcryp->State == HAL_CRYP_STATE_BUSY) + { +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Wait until both the IN and the OUT FIFOs are empty (IFEM=1 and OFNE=0 in the + CRYP_SR) and the BUSY bit is cleared */ + while (((((CRYP_TypeDef *)(hcryp->Instance))->SR) & (CRYP_SR_IFEM | CRYP_SR_OFNE | \ + CRYP_SR_BUSY)) != CRYP_SR_IFEM) + { + /* Nothing to do */ + } + + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /*Temporary CrypOutCount Value */ + incount = hcryp->CrypInCount; + + if (((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_IFNF) != 0x0U) && (incount < (hcryp->Size / 4U))) + { + /* Write the input block in the IN FIFO */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); + + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + if (((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) && (outcount < (hcryp->Size / 4U))) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + i = 0U; + while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + if (hcryp->CrypOutCount == (hcryp->Size / 4U)) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } /* if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) */ + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + if (hcryp->CrypOutCount == (hcryp->Size / 4U)) + { + /* Disable Computation Complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + __HAL_UNLOCK(hcryp); + + /* Call Output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } /* if (hcryp->CrypOutCount == (hcryp->Size / 4U)) */ + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Writes Key in Key registers. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param KeySize: Size of Key + * @retval None + */ +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize) +{ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + ((CRYP_TypeDef *)(hcryp->Instance))->K0LR = *(uint32_t *)(hcryp->Init.pKey); + ((CRYP_TypeDef *)(hcryp->Instance))->K0RR = *(uint32_t *)(hcryp->Init.pKey + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->K1LR = *(uint32_t *)(hcryp->Init.pKey + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->K1RR = *(uint32_t *)(hcryp->Init.pKey + 3); + ((CRYP_TypeDef *)(hcryp->Instance))->K2LR = *(uint32_t *)(hcryp->Init.pKey + 4); + ((CRYP_TypeDef *)(hcryp->Instance))->K2RR = *(uint32_t *)(hcryp->Init.pKey + 5); + ((CRYP_TypeDef *)(hcryp->Instance))->K3LR = *(uint32_t *)(hcryp->Init.pKey + 6); + ((CRYP_TypeDef *)(hcryp->Instance))->K3RR = *(uint32_t *)(hcryp->Init.pKey + 7); + break; + + case CRYP_KEYSIZE_192B: + ((CRYP_TypeDef *)(hcryp->Instance))->K1LR = *(uint32_t *)(hcryp->Init.pKey); + ((CRYP_TypeDef *)(hcryp->Instance))->K1RR = *(uint32_t *)(hcryp->Init.pKey + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->K2LR = *(uint32_t *)(hcryp->Init.pKey + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->K2RR = *(uint32_t *)(hcryp->Init.pKey + 3); + ((CRYP_TypeDef *)(hcryp->Instance))->K3LR = *(uint32_t *)(hcryp->Init.pKey + 4); + ((CRYP_TypeDef *)(hcryp->Instance))->K3RR = *(uint32_t *)(hcryp->Init.pKey + 5); + break; + + case CRYP_KEYSIZE_128B: + ((CRYP_TypeDef *)(hcryp->Instance))->K2LR = *(uint32_t *)(hcryp->Init.pKey); + ((CRYP_TypeDef *)(hcryp->Instance))->K2RR = *(uint32_t *)(hcryp->Init.pKey + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->K3LR = *(uint32_t *)(hcryp->Init.pKey + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->K3RR = *(uint32_t *)(hcryp->Init.pKey + 3); + break; + + default: + break; + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.pKey != NULL) + { + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + ((SAES_TypeDef *)(hcryp->Instance))->KEYR7 = *(uint32_t *)(hcryp->Init.pKey); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR6 = *(uint32_t *)(hcryp->Init.pKey + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR5 = *(uint32_t *)(hcryp->Init.pKey + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR4 = *(uint32_t *)(hcryp->Init.pKey + 3U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR3 = *(uint32_t *)(hcryp->Init.pKey + 4U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 5U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 6U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + ((SAES_TypeDef *)(hcryp->Instance))->KEYR3 = *(uint32_t *)(hcryp->Init.pKey); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 3U); + + break; + default: + break; + } + } /* if (hcryp->Init.pKey != NULL) */ + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U; + uint32_t npblb ; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t index ; + uint32_t lastwordsize ; + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t mode; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /****************************** Init phase **********************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Wait for the CRYPEN bit to be cleared*/ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* We should re-write Key, in the case where we change key after first operation */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /*************************Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, 0U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Select payload phase once the header phase is performed */ + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + } +#endif /* USE_HAL_SAES_ONLY */ + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + /* Write input data and get output data */ + while ((hcryp->CrypInCount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); + + /* Set Npblb in case of AES GCM payload encryption to get right tag */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + mode = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGODIR; + if (mode == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Disable the CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Specify the number of non-valid bytes using NPBLB register */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20U); + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (mode == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Specify the number of non-valid bytes using NPBLB register */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20U); + } + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + index++; + } + + /* Wait for OFNE flag to be raised */ + if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /*Read the output block from the output FIFO */ + if ((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) + { + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + } + else + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_READ; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + index++; + } + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer */ + temp[index] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + } +#endif /* USE_HAL_SAES_ONLY */ + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp[index]; + hcryp->CrypOutCount++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG in interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; + uint32_t tickstart; +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t count; + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t npblb; + const uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ +#endif /* USE_HAL_SAES_ONLY */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + /* Manage header size given in bytes to handle cases where + header size is not a multiple of 4 bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } +#endif /* USE_HAL_SAES_ONLY */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /******************************* Init phase *********************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get tick */ + tickstart = HAL_GetTick(); + /*Wait for the CRYPEN bit to be cleared */ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* We should re-write Key, in the case where we change key after first operation */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((SAES_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for KEYVALID flag to be set */ + count = CRYP_TIMEOUT_KEYPREPARATION; + do + { + count--; + if (count == 0U) + { + /* Disable the SAES peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_KEYVALID)); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count--; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /***************************** Header phase *********************************/ + + /* Select header phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if (headersize_in_bytes == 0U) /*header phase is skipped*/ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_GCMPH, SAES_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + /* Enter header data */ + /* Cher first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) + { + /* Write header data, padded with zeros if need be */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++ ; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + } +#endif /* USE_HAL_SAES_ONLY */ + } /* end of if (DoKeyIVConfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } /* if (DoKeyIVConfig != 1U) */ + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG using DMA + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + __IO uint32_t count = 0U; +#endif /* USE_HAL_CRYP_ONLY */ + uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U ; + uint32_t index; + uint32_t npblb; + uint32_t lastwordsize = 0U; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t mode; + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint32_t tickstart; +#endif /* USE_HAL_CRYP_ONLY */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /*************************** Init phase ************************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(hcryp->Init.pInitVect); + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Get tick */ + tickstart = HAL_GetTick(); + /*Wait for the CRYPEN bit to be cleared */ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + /************************ Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, 0U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + } +#endif /* USE_HAL_SAES_ONLY */ + + } /* if (DoKeyIVConfig == 1U) */ + + if (hcryp->Size == 0U) + { + /* Process unLocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state and phase */ + hcryp->State = HAL_CRYP_STATE_READY; + } + else if (hcryp->Size >= 16U) + { + /* DMA transfer must not include the last block in case of Size is not %16 */ + wordsize = wordsize - (wordsize % 4U); + + /* DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (uint16_t)wordsize * 4U, + (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else /* length of input data is < 16 */ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + /* Set Npblb in case of AES GCM payload encryption to get right tag*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + mode = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGODIR; + + if (mode == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20); + } + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0; index < lastwordsize; index ++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + index++; + } + + /* Wait for OFNE flag to be raised */ + count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_OFNE)); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0; index < lastwordsize; index ++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + index++; + } + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /*Call registered error callback*/ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Clear the CCF flag by setting the CCF bit of the SAES_ICR register */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + } +#endif /* USE_HAL_SAES_ONLY */ + + for (index = 0; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief AES CCM encryption/decryption processing in polling mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout: Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U; + uint32_t npblb ; + uint32_t lastwordsize ; + uint32_t temp[4] ; /* Temporary CrypOutBuff */ + uint32_t index ; + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t mode; + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /********************** Init phase ******************************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + /* Set the initialization vector (IV) with CTR1 information */ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = hcryp->Init.B0[1]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = hcryp->Init.B0[2]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the initialization vector (IV) with B0 */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Wait for the CRYPEN bit to be cleared*/ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* We should re-write Key, in the case where we change key after first operation */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set the initialization vector (IV) with B0 */ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.B0); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /************************* Header phase *************************************/ + /* Header block(B1) : associated data length expressed in bytes concatenated + with Associated Data (A)*/ + + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + /********************** Payload phase ***************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + /* Select payload phase once the header phase is performed */ + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + } +#endif /* USE_HAL_SAES_ONLY */ + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + /* Write input data and get output data */ + while ((hcryp->CrypInCount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /*Temporary CrypOutCount Value */ + outcount = hcryp->CrypOutCount; + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)(hcryp->Size) / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); + + mode = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGODIR; + if (mode == CRYP_OPERATINGMODE_DECRYPT) + { + /* Disable the CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set Npblb in case of AES CCM payload decryption to get right tag */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20); + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + index++; + } + + /* Wait for OFNE flag to be raised */ + if (CRYP_WaitOnOFNEFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /*Read the output block from the output FIFO */ + if ((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) + { + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + for (index = 0; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (mode == CRYP_OPERATINGMODE_DECRYPT) + { + /* Set Npblb in case of AES CCM payload decryption to get right tag */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20); + } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + index++; + } + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer */ + temp[index] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + } + } +#endif /* USE_HAL_SAES_ONLY */ + /* Wait until the complete message has been processed */ + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM encryption/decryption process in interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t Timeout = CRYP_GENERAL_TIMEOUT; +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint32_t tickstart; +#endif /* USE_HAL_CRYP_ONLY */ + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t headersize_in_bytes; + uint32_t tmp; + const uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ +#endif /* USE_HAL_SAES_ONLY */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /************ Init phase ************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + + /* Set the initialization vector (IV) with CTR1 information */ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = hcryp->Init.B0[1]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = hcryp->Init.B0[2]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /*Write the B0 packet into CRYP_DR*/ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Wait for the CRYPEN bit to be cleared */ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* We should re-write Key, in the case where we change key after first operation */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set the initialization vector (IV) with B0 */ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.B0); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /***************************** Header phase *********************************/ + + /* Select header phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Select header phase */ + SAES_SET_PHASE(hcryp, SAES_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + if (headersize_in_bytes == 0U) /* Header phase is skipped */ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + /* Enter header data */ + /* Check first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) + { + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = tmp; + hcryp->CrypHeaderCount++; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } /* if (hcryp->Init.HeaderSize == 0U) */ /* Header phase is skipped*/ + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ + } /* end of if (dokeyivconfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } /* end of if (DoKeyIVConfig == 1U) */ + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief AES CCM encryption/decryption process in DMA mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t wordsize = (uint32_t)(hcryp->Size) / 4U ; + uint32_t index; + uint32_t npblb; + uint32_t lastwordsize = 0U; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t mode; +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint32_t tickstart; +#endif /* USE_HAL_CRYP_ONLY */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /************************** Init phase **************************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the Key */ + if (hcryp->Init.KeyIVConfigSkip != CRYP_KEYNOCONFIG) + { + if (hcryp->Init.KeyMode != CRYP_KEYMODE_SHARED) + { + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + else /*after sharing the key, AES should set KMOD[1:0] to 00.*/ + { + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_KEYMODE_SHARED; + } + } + /* Set the initialization vector (IV) with CTR1 information */ + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = (hcryp->Init.B0[0]) & CRYP_CCM_CTR1_0; + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = hcryp->Init.B0[1]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = hcryp->Init.B0[2]; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = (hcryp->Init.B0[3] & CRYP_CCM_CTR1_1) | CRYP_CCM_CTR1_2; + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /*Write the B0 packet into CRYP_DR*/ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 1); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 2); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.B0 + 3); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Wait for the CRYPEN bit to be cleared*/ + while ((((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > CRYP_TIMEOUT_GCMCCMINITPHASE) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_INIT); + + /* We should re-write Key, in the case where we change key after first operation */ + if ((hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) && (hcryp->Init.KeyMode == CRYP_KEYMODE_NORMAL)) + { + /* Set the Key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + }; + + /* Set the initialization vector (IV) with B0 */ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.B0); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, CRYP_TIMEOUT_GCMCCMINITPHASE) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /********************* Header phase *****************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + /******************** Payload phase *****************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, 0U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + } +#endif /* USE_CRYP_INSTANCE */ + } /* if (DoKeyIVConfig == 1U) */ + + if (hcryp->Size == 0U) + { + /* Process unLocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state and phase */ + hcryp->State = HAL_CRYP_STATE_READY; + } + else if (hcryp->Size >= 16U) + { + wordsize = wordsize - (wordsize % 4U); + /* DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (uint16_t) wordsize * 4U, + (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else /* length of input data is < 16U */ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)(hcryp->Size); + + /* Set Npblb in case of AES CCM payload decryption to get right tag*/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + mode = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGODIR; + + if (mode == CRYP_OPERATINGMODE_DECRYPT) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20); + } + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + index++; + } + + /* Wait for OFNE flag to be raised */ + if (CRYP_WaitOnOFNEFlag(hcryp, CRYP_TIMEOUT_GCMCCMINITPHASE) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + } /* SAES peripheral */ +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + + if (mode == CRYP_OPERATINGMODE_DECRYPT) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (index = 0U; index < lastwordsize; index ++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (index < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + index++; + } + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, CRYP_TIMEOUT_GCMCCMINITPHASE) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & update error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + temp[index] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + } +#endif /* USE_HAL_SAES_ONLY */ + + for (index = 0; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the payload phase in interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + uint8_t negative = 0U; +#endif /* USE_HAL_CRYP_ONLY */ + uint32_t i; + + /***************************** Payload phase *******************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if ((hcryp->Size / 4U) < hcryp->CrypInCount) + { + negative = 1U; + } + + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + else if ((((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) && + (negative == 0U)) + { + if ((((CRYP_TypeDef *)(hcryp->Instance))->IMSCR & CRYP_IMSCR_INIM) != 0x0U) + { + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Wait until both the IN and the OUT FIFOs are empty (IFEM=1 and OFNE=0 in the + CRYP_SR) and the BUSY bit is cleared */ + while (((((CRYP_TypeDef *)(hcryp->Instance))->SR) & (CRYP_SR_IFEM | CRYP_SR_OFNE | \ + CRYP_SR_BUSY)) != CRYP_SR_IFEM) + { + /* Nothing to do */ + } + + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if (((hcryp->Size / 4U) == hcryp->CrypInCount) && ((hcryp->Size % 16U) == 0U)) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + if (hcryp->CrypOutCount < (hcryp->Size / 4U)) + { + if ((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) + { + /* Read the output block from the Output FIFO and put them in temporary buffer then get CrypOutBuff from + temporary buffer */ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + i = 0U; + while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + if (((hcryp->Size / 4U) == hcryp->CrypOutCount) && ((hcryp->Size % 16U) == 0U)) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + } /* if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) */ + } + } + else if ((hcryp->Size % 16U) != 0U) + { + /* Set padding only in case of input fifo interrupt */ + if ((((CRYP_TypeDef *)(hcryp->Instance))->IMSCR & CRYP_IMSCR_INIM) != 0x0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - (uint32_t)(hcryp->Size); + + mode = ((CRYP_TypeDef *)(hcryp->Instance))->CR & CRYP_CR_ALGODIR; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Disable the CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, npblb << 20); + + /* Enable CRYP to start the final phase */ + __HAL_CRYP_ENABLE(hcryp); + } + + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + loopcounter++; + } + + /* Disable the input FIFO Interrupt */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); + } + + /*Read the output block from the output FIFO */ + if ((((CRYP_TypeDef *)(hcryp->Instance))->SR & CRYP_FLAG_OFNE) != 0x0U) + { + for (i = 0U; i < 4U; i++) + { + temp[i] = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + } + if (((hcryp->Size) / 4U) == 0U) + { + for (i = 0U; (uint16_t)i < ((hcryp->Size) % 4U); i++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + } + } + i = 0U; + while (((hcryp->CrypOutCount < ((hcryp->Size) / 4U))) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + } + + /* Disable the output FIFO Interrupt */ + if (hcryp->CrypOutCount >= ((hcryp->Size) / 4U)) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI | CRYP_IT_INI); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + uint32_t incount; + uint32_t outcount; + + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + if ((outcount >= ((uint32_t)(hcryp->Size) / 4U)) && ((incount * 4U) >= (uint32_t)(hcryp->Size))) + { + + /* When in CCM with Key and IV configuration skipped, don't disable interruptions */ + if (!((hcryp->Init.Algorithm == CRYP_AES_CCM) && (hcryp->KeyIVConfig == 1U))) + { + /* Disable computation complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + else if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) + { + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) + { + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + else /* Last block of payload < 128bit*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ +} + + +/** + * @brief Sets the header phase in polling mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @param Timeout: Timeout value + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t loopcounter; +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t headersize_in_bytes; + uint32_t tmp; + const uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ +#endif /* USE_HAL_SAES_ONLY */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + + /* Select header phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if ((hcryp->Init.HeaderSize % 4U) == 0U) + { + /* HeaderSize %4, no padding */ + for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + else + { + /*Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((hcryp->Init.HeaderSize) - (hcryp->Init.HeaderSize % 4U))); + loopcounter += 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; (loopcounter < (hcryp->Init.HeaderSize % 4U)); loopcounter++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0x0U; + loopcounter++; + } + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + /* Set Header phase */ + SAES_SET_PHASE(hcryp, SAES_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if ((headersize_in_bytes % 16U) == 0U) + { + /* HeaderSize %4, no padding */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter += 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } + } + else + { + /*Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 16U) * 4U)); loopcounter += 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } + } +#endif /* USE_HAL_SAES_ONLY */ + /* Wait until the complete message has been processed */ + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Sets the header phase when using DMA in process + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t Timeout = CRYP_TIMEOUT_GCMCCMHEADERPHASE; +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t headersize_in_bytes; + uint32_t tmp; + const uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ +#endif /* USE_HAL_SAES_ONLY */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + if ((hcryp->Init.HeaderSize != 0U)) + { + /* Select header phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if ((hcryp->Init.HeaderSize % 4U) == 0U) + { + /* HeaderSize %4, no padding */ + for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + else + { + /*Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((hcryp->Init.HeaderSize) - (hcryp->Init.HeaderSize % 4U))); + loopcounter += 4U) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; (loopcounter < (hcryp->Init.HeaderSize % 4U)); loopcounter++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0x0U; + loopcounter++; + } + + /* Wait for IFEM to be raised */ + if (CRYP_WaitOnIFEMFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + /* Set header phase*/ + SAES_SET_PHASE(hcryp, SAES_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if ((headersize_in_bytes % 16U) == 0U) + { + /* HeaderSize %4, no padding */ + for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + else + { + /*Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 16U) * 4U)); loopcounter += 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + } + + /* Wait for CCF to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } +#endif /* USE_HAL_SAES_ONLY */ + /* Wait until the complete message has been processed */ + Timeout = CRYP_GENERAL_TIMEOUT; + if (CRYP_WaitOnBUSYFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the header phase in interrupt mode + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint32_t headersize_in_bytes; + uint32_t tmp; + const uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ +#endif /* USE_HAL_SAES_ONLY */ + + /***************************** Header phase *********************************/ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.HeaderSize == hcryp->CrypHeaderCount) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI); + + /* Disable the CRYP peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_NPBLB, 0U); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } + else if (((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount)) >= 4U) + + { + /* HeaderSize %4, no padding */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + else + { + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize % 4U); loopcounter++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0x0U; + loopcounter++ ; + } + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + /***************************** Header phase *********************************/ + /* Test whether or not the header phase is over. + If the test below is true, move to payload phase */ + if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + /* Select payload phase */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_GCMPH, SAES_PHASE_PAYLOAD); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + mode = CRYP_CONV_ALGODIR(((SAES_TypeDef *)(hcryp->Instance))->CR & SAES_CR_MODE); + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, SAES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + } + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else if ((((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U)) + { + /* Can enter full 4 header words */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the header */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_HEADER_SUSPENDED; + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + } + else /* Write last header block (4 words), padded with zeros if needed */ + { + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + } + } /* if (IS_SAES_INSTANCE(hcryp->Instance)) */ +#endif /* USE_HAL_SAES_ONLY */ +} + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +/** + * @brief Handle CRYP hardware block Timeout when waiting for IFEM flag to be raised. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnIFEMFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_IFEM)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} +#endif /* USE_HAL_CRYP_ONLY */ + +/** + * @brief Handle CRYP hardware block Timeout when waiting for BUSY flag to be raised. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnBUSYFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t flag_busy = 0U; + + /* Get timeout */ + tickstart = HAL_GetTick(); + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + flag_busy = CRYP_FLAG_BUSY; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + flag_busy = SAES_FLAG_BUSY; + } +#endif /* USE_HAL_SAES_ONLY */ + while (HAL_IS_BIT_SET(((CRYP_TypeDef *)(hcryp->Instance))->SR, flag_busy)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +/** + * @brief Handle CRYP hardware block Timeout when waiting for OFNE flag to be raised. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnOFNEFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_OFNE)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} +#endif /* USE_HAL_CRYP_ONLY */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** + * @brief Handle CRYP hardware block Timeout when waiting for CCF flag to be raised. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(const CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} +#endif /* USE_HAL_SAES_ONLY */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief In case of message processing suspension, read the Initialization Vector. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Initialization Vector. + * @note This value has to be stored for reuse by writing the AES_IVRx registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output) +{ + uint32_t outputaddr = (uint32_t)Output; + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + *(uint32_t *)(outputaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR; + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + *(uint32_t *)(outputaddr) = ((SAES_TypeDef *)(hcryp->Instance))->IVR3; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((SAES_TypeDef *)(hcryp->Instance))->IVR2; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((SAES_TypeDef *)(hcryp->Instance))->IVR1; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = ((SAES_TypeDef *)(hcryp->Instance))->IVR0; + } +#endif /* USE_HAL_SAES_ONLY */ +} + +/** + * @brief In case of GCM/GMAC/CCM processing resumption, rewrite the Initialization + * Vector in the SAES_IVx registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved Initialization Vector to + * write back in the CRYP hardware block. + * @note Applicable only to CRYP peripheral + * @note CRYP must be disabled when reconfiguring the IV values. + * @retval None + */ +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input) +{ + uint32_t ivaddr = (uint32_t)Input; +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + ((CRYP_TypeDef *)(hcryp->Instance))->IV0LR = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((CRYP_TypeDef *)(hcryp->Instance))->IV0RR = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1LR = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((CRYP_TypeDef *)(hcryp->Instance))->IV1RR = *(uint32_t *)(ivaddr); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(ivaddr); + } +#endif /* USE_HAL_SAES_ONLY */ +} + +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) +/** + * @brief In case of message GCM/GMAC/CCM processing suspension, + * read the context swap Registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Suspend Registers. + * @param Algorithm specifies whether CCM or GCM/GMAC is suspended. + * @note These values have to be stored for reuse by writing back the CRYP_CSGCMCCMxR CRYP_CSGCMxR registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_ContextSwapRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output, uint32_t Algorithm) +{ + uint32_t outputaddr = (uint32_t)Output; + uint32_t inputaddr = (uint32_t)(&((CRYP_TypeDef *)(hcryp->Instance))->CSGCMCCM0R); + uint32_t i; + + for (i = 0; i < 8U; i++) + { + *(uint32_t *)(outputaddr) = *(uint32_t *)(inputaddr); + outputaddr += 4U; + inputaddr += 4U; + } + if (Algorithm == CRYP_AES_GCM) + { + for (i = 0; i < 8U; i++) + { + *(uint32_t *)(outputaddr) = *(uint32_t *)(inputaddr); + outputaddr += 4U; + inputaddr += 4U; + } + } +} +#endif /* USE_HAL_CRYP_ONLY */ + +/** + * @brief In case of message GCM/GMAC/CCM processing resumption, rewrite the context swap registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved suspend registers to + * write back in the CRYP hardware block. + * @param Algorithm specifies whether CCM or GCM/GMAC is suspended. + * @note AES must be disabled when reconfiguring the suspend registers. + * @retval None + */ +static void CRYP_Write_ContextSwapRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t Algorithm) +{ + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)(&((CRYP_TypeDef *)(hcryp->Instance))->CSGCMCCM0R); + uint32_t i; + + for (i = 0; i < 8U; i++) + { + *(uint32_t *)(outputaddr) = *(uint32_t *)(inputaddr); + outputaddr += 4U; + inputaddr += 4U; + } + if (Algorithm == CRYP_AES_GCM) + { + for (i = 0; i < 8U; i++) + { + *(uint32_t *)(outputaddr) = *(uint32_t *)(inputaddr); + outputaddr += 4U; + inputaddr += 4U; + } + } +} + +/** + * @brief Authentication phase resumption in case of GCM/GMAC/CCM process in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) +{ + /* Case of header phase resumption =================================================*/ + if (hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select header phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_HEADER); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Enable interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + } + /* Case of payload phase resumption =================================================*/ + else + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + SAES_SET_PHASE(hcryp, SAES_PHASE_PAYLOAD); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Enable Interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + } +} + +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/* + * @brief Adaptation needed do differentiate between CRYP and SAES CR_CHMOD fields + * @param algo: corresponds to the algorithm to set + * order: determines if conversion is done from CRYP to SAES and vice versa + order = ALGOMODE_CRYP_TO_CHMOD_SAES means from algomode CRYP to chmod SAES + order = ALGOMODE_SAES_TO_CHMOD_CRYP means from algomode SAES to chmod CRYP + * @retval new_algo: correspond to the CR_CHMOD setting applied + */ +static uint32_t CRYP_SAES_AlgoConversion(uint32_t algo, uint32_t order) +{ + uint32_t new_algo = 0x0; + + if (order == 0U) /* from algomode CRYP to chmod SAES */ + { + switch (algo) + { + case CRYP_AES_ECB : + new_algo = SAES_CR_CHMOD_AES_ECB; + break; + case CRYP_AES_CBC : + new_algo = SAES_CR_CHMOD_AES_CBC; + break; + case CRYP_AES_CTR : + new_algo = SAES_CR_CHMOD_AES_CTR; + break; + case CRYP_AES_GCM : + new_algo = SAES_CR_CHMOD_AES_GCM; + break; + case CRYP_AES_CCM : + new_algo = SAES_CR_CHMOD_AES_CCM; + break; + default : + break; + } + + } + else /* order == 1 , from chmod SAES to algomode CRYP */ + { + switch (algo) + { + case SAES_CR_CHMOD_AES_ECB : + new_algo = CRYP_AES_ECB; + break; + case SAES_CR_CHMOD_AES_CBC : + new_algo = CRYP_AES_CBC; + break; + case SAES_CR_CHMOD_AES_CTR : + new_algo = CRYP_AES_CTR; + break; + case SAES_CR_CHMOD_AES_GCM : + new_algo = CRYP_AES_GCM; + break; + case SAES_CR_CHMOD_AES_CCM : + new_algo = CRYP_AES_CCM; + break; + default : + break; + } + } + + return new_algo; +} +#endif /* USE_HAL_SAES_ONLY */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ + + +/** + * @} + */ +#endif /* CRYP */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp_ex.c new file mode 100644 index 000000000..3ad892b28 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_cryp_ex.c @@ -0,0 +1,1016 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_cryp_ex.c + * @author MCD Application Team + * @brief Extended CRYP HAL module driver + * This file provides firmware functions to manage the following + * functionalities of CRYP extension peripheral: + * + Extended AES processing functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRYP extension HAL driver can be used after AES-GCM or AES-CCM + Encryption/Decryption to get the authentication messages. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (CRYP) +/** @defgroup CRYPEx CRYPEx + * @brief CRYP Extension HAL module driver. + * @{ + */ + +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYPEx_Private_Defines + * @{ + */ + +#define CRYP_PHASE_INIT 0x00000000U +#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0 +#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1 +#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +#define SAES_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define SAES_PHASE_HEADER SAES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define SAES_PHASE_PAYLOAD SAES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define SAES_PHASE_FINAL SAES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ +#endif /* USE_HAL_SAES_ONLY */ + +#define CRYPEx_PHASE_PROCESS 0x02U /*!< CRYP peripheral is in processing phase */ +#define CRYPEx_PHASE_FINAL 0x03U /*!< CRYP peripheral is in final phase this is relevant + only with CCM and GCM modes */ + +/* CTR0 information to use in CCM algorithm */ +#define CRYP_CCM_CTR0_0 0x07FFFFFFU +#define CRYP_CCM_CTR0_3 0xFFFFFF00U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +static HAL_StatusTypeDef CRYPEx_KeyDecrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYPEx_KeyEncrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYPEx_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize); +#endif /* USE_HAL_SAES_ONLY */ +/* Exported functions---------------------------------------------------------*/ +/** @addtogroup CRYPEx_Exported_Functions + * @{ + */ + +/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions + * @brief CRYPEx Extended processing functions. + * +@verbatim + ============================================================================== + ##### Extended AES processing functions ##### + ============================================================================== + [..] This section provides functions allowing to generate the authentication + TAG in Polling mode + (+)HAL_CRYPEx_AESGCM_GenerateAuthTAG + (+)HAL_CRYPEx_AESCCM_GenerateAuthTAG + they should be used after Encrypt/Decrypt operation. + +@endverbatim + * @{ + */ + + +/** + * @brief generate the GCM authentication TAG. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pAuthTag: Pointer to the authentication buffer + * the AuthTag generated here is 128bits length, if the TAG length is + * less than 128bits, user should consider only the valid part of AuthTag + * buffer which correspond exactly to TAG length. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, const uint32_t *pAuthTag, + uint32_t Timeout) +{ + uint32_t tickstart; + uint64_t headerlength; + uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* input length in bits */ + uint32_t tagaddr = (uint32_t)pAuthTag; + uint8_t i; + + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headerlength = (uint64_t)(hcryp->Init.HeaderSize) * 32U; /* Header length in bits */ + } + else + { + headerlength = (uint64_t)(hcryp->Init.HeaderSize) * 8U; /* Header length in bits */ + } + + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the Peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Select final phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable CRYP to start the final phase */ + __HAL_CRYP_DISABLE(hcryp); + + /* ALGODIR bit must be set to '0'. */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL); + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_CR_ALGODIR; + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Write the number of bits in header (64 bits) followed by the number of bits + in the payload */ + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = (uint32_t)(headerlength); + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = 0U; + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = (uint32_t)(inputlength); + + /* Wait for OFNE flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_OFNE)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP Peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + /* Read the authentication TAG in the output FIFO */ + for (i = 0U; i < 4U; i++) + { + *(uint32_t *)(tagaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + tagaddr += 4U; + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Select final phase */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_GCMPH, SAES_PHASE_FINAL); + + /* Write the number of bits in header (64 bits) followed by the number of bits + in the payload */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = (uint32_t)(headerlength); + ((SAES_TypeDef *)(hcryp->Instance))->DINR = 0U; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = (uint32_t)(inputlength); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Read the authentication TAG in the output FIFO */ + for (i = 0U; i < 4U; i++) + { + *(uint32_t *)(tagaddr) = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + tagaddr += 4U; + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM Authentication TAG generation. + * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param pAuthTag: Pointer to the authentication buffer + * the AuthTag generated here is 128bits length, if the TAG length is + * less than 128bits, user should consider only the valid part of AuthTag + * buffer which correspond exactly to TAG length. + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, const uint32_t *pAuthTag, + uint32_t Timeout) +{ + uint32_t tagaddr = (uint32_t)pAuthTag; + uint32_t ctr0 [4] = {0}; + uint32_t ctr0addr = (uint32_t)ctr0; + uint32_t tickstart; + uint8_t i; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Disable interrupts, we are now in polling mode to TAG generation */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_RWEIE | CRYP_IT_KEIE); + } +#endif /* USE_HAL_SAES_ONLY */ + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Select final phase */ +#if !defined(USE_HAL_CRYP_ONLY) || (USE_HAL_CRYP_ONLY == 1) + if (IS_CRYP_INSTANCE(hcryp->Instance)) + { + /* Disable CRYP to start the final phase */ + __HAL_CRYP_DISABLE(hcryp); + + /* ALGODIR bit must be set to '0' */ + MODIFY_REG(((CRYP_TypeDef *)(hcryp->Instance))->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL); + ((CRYP_TypeDef *)(hcryp->Instance))->CR &= ~CRYP_CR_ALGODIR; + + /* Write the counter block in the IN FIFO, CTR0 information from B0 + data has to be swapped according to the DATATYPE*/ + ctr0[0] = hcryp->Init.B0[0] & CRYP_CCM_CTR0_0; + ctr0[1] = hcryp->Init.B0[1]; + ctr0[2] = hcryp->Init.B0[2]; + ctr0[3] = hcryp->Init.B0[3] & CRYP_CCM_CTR0_3; + + for (i = 0U; i < 4U; i++) + { + ((CRYP_TypeDef *)(hcryp->Instance))->DIN = *(uint32_t *)(ctr0addr); + ctr0addr += 4U; + } + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for OFNE flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((CRYP_TypeDef *)((hcryp->Instance)))->SR, CRYP_FLAG_OFNE)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + /* Read the authentication TAG in the output FIFO */ + for (i = 0U; i < 4U; i++) + { + *(uint32_t *)(tagaddr) = ((CRYP_TypeDef *)(hcryp->Instance))->DOUT; + tagaddr += 4U; + } + } +#endif /* USE_HAL_CRYP_ONLY */ +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) + if (IS_SAES_INSTANCE(hcryp->Instance)) + { + /* Change SAES final phase */ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_GCMPH, SAES_PHASE_FINAL); + + for (i = 0U; i < 4U; i++) + { + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(ctr0addr); + ctr0addr += 4U; + } + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, CRYP_FLAG_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + /* Read the authentication TAG in the output FIFO */ + for (i = 0U; i < 4U; i++) + { + *(uint32_t *)(tagaddr) = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + tagaddr += 4U; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } +#endif /* USE_HAL_SAES_ONLY */ + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + + +/** @defgroup CRYPEx_Exported_Functions_Group2 Wrap and Unwrap key functions + * @brief Wrap and Unwrap key functions. + * +@verbatim + ============================================================================== + ##### Wrap and Unwrap key ##### + ============================================================================== + [..] This section provides API allowing to wrap (encrypt) and unwrap (decrypt) + key using one of the following keys, and AES Algorithm. + Key selection : + - Derived hardware unique key (DHUK) + - XOR of DHUK and BHK + - Boot hardware key (BHK) + - Key registers AES_KEYx + +@endverbatim + * @{ + */ + +#if !defined(USE_HAL_SAES_ONLY) || (USE_HAL_SAES_ONLY == 1) +/** + * @brief Wrap (encrypt) application keys . + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the Key buffer to encrypt + * @param Output Pointer to the Key buffer encrypted + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_WrapKey(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t *Output, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set the operating mode*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_WRAPPED); + + status = CRYPEx_KeyEncrypt(hcryp, Timeout); + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief Unwrap (Decrypt) application keys . + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the Key buffer to decrypt + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_UnwrapKey(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set the operating mode*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD, CRYP_KEYMODE_WRAPPED); + + status = CRYPEx_KeyDecrypt(hcryp, Timeout); + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup CRYPEx_Exported_Functions_Group3 Encrypt/Decrypt Shared key functions + * @brief Encrypt/Decrypt Shared key functions. + * +@verbatim + ============================================================================== + ##### Encrypt/Decrypt Shared key functions ##### + ============================================================================== + [..] This section provides API allowing to Encrypt/Decrypt Shared key + +@endverbatim + * @{ + */ + +/** + * @brief Encrypt Shared key. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Key Pointer to the Key buffer to share + * @param Output buffer pointer + * @param ID Key share identification + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_EncryptSharedKey(CRYP_HandleTypeDef *hcryp, uint32_t *Key, uint32_t *Output, uint32_t ID, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Key; + hcryp->pCrypOutBuffPtr = Output; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set the operating mode*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD | SAES_CR_KSHAREID, CRYP_KEYMODE_SHARED | ID); + + status = CRYPEx_KeyEncrypt(hcryp, Timeout); + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief Decrypt Shared key. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Key Pointer to the Key buffer to share + * @param ID Key share identification + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_DecryptSharedKey(CRYP_HandleTypeDef *hcryp, uint32_t *Key, uint32_t ID, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Key; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Set the operating mode*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_KMOD | SAES_CR_KSHAREID, CRYP_KEYMODE_SHARED | ID); + + status = CRYPEx_KeyDecrypt(hcryp, Timeout); + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief Key Decryption + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout specify Timeout value + * @note It is strongly recommended to select hardware secret keys + * @retval HAL status + */ +static HAL_StatusTypeDef CRYPEx_KeyDecrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t tickstart; + + /* key preparation for decryption, operating mode 2*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_KEY_DERIVATION); + + /*It is strongly recommended to select hardware secret keys*/ + if (hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) + { + /* Set the Key*/ + CRYPEx_SetKey(hcryp, hcryp->Init.KeySize); + } + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* End of Key preparation for ECB/CBC */ + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_MODE_DECRYPT); + + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = CRYPEx_PHASE_PROCESS; + + if (hcryp->Init.KeySize == CRYP_KEYSIZE_128B) + { + incount = 4; + } + else + { + incount = 8; + } + while (hcryp->CrypInCount < incount) + { + /* Write four times to input the key to encrypt */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + } + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + return HAL_OK; +} + +/** + * @brief Key Encryption + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYPEx_KeyEncrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t tickstart; + uint32_t temp; /* Temporary CrypOutBuff */ + + MODIFY_REG(((SAES_TypeDef *)(hcryp->Instance))->CR, SAES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + ((SAES_TypeDef *)(hcryp->Instance))->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + ((SAES_TypeDef *)(hcryp->Instance))->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + /*It is strongly recommended to select hardware secret keys*/ + if (hcryp->Init.KeySelect == CRYP_KEYSEL_NORMAL) + { + /* Set the Key*/ + CRYPEx_SetKey(hcryp, hcryp->Init.KeySize); + } + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for Valid KEY flag to set */ + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_KEYVALID)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + /* Process unlocked */ + return HAL_ERROR; + } + } + } + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = CRYPEx_PHASE_PROCESS; + + if (hcryp->Init.KeySize == CRYP_KEYSIZE_128B) + { + incount = 4; + } + else + { + incount = 8; + } + while (hcryp->CrypInCount < incount) + { + /* Write four times to input the key to encrypt */ + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + ((SAES_TypeDef *)(hcryp->Instance))->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(((SAES_TypeDef *)(hcryp->Instance))->SR, SAES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CLEAR_CCF); + + /* Read the output block from the output FIFO and put them in temporary buffer then + get CrypOutBuff from temporary buffer*/ + temp = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp; + hcryp->CrypOutCount++; + temp = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp; + hcryp->CrypOutCount++; + temp = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp; + hcryp->CrypOutCount++; + temp = ((SAES_TypeDef *)(hcryp->Instance))->DOUTR; + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp; + hcryp->CrypOutCount++; + } + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + return HAL_OK; +} + +/** + * @brief Write Key in Key registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param KeySize Size of Key + * @note If pKey is NULL, the Key registers are not written. + * @retval None + */ +static void CRYPEx_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize) +{ + if (hcryp->Init.pKey != NULL) + { + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + ((SAES_TypeDef *)(hcryp->Instance))->KEYR7 = *(uint32_t *)(hcryp->Init.pKey); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR6 = *(uint32_t *)(hcryp->Init.pKey + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR5 = *(uint32_t *)(hcryp->Init.pKey + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR4 = *(uint32_t *)(hcryp->Init.pKey + 3U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR3 = *(uint32_t *)(hcryp->Init.pKey + 4U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 5U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 6U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + ((SAES_TypeDef *)(hcryp->Instance))->KEYR3 = *(uint32_t *)(hcryp->Init.pKey); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 1U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 2U); + ((SAES_TypeDef *)(hcryp->Instance))->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 3U); + + break; + default: + break; + } + } +} + +/** + * @} + */ +#endif /* USE_HAL_SAES_ONLY */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +/** + * @} + */ + +#endif /* CRYP */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dcmipp.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dcmipp.c new file mode 100644 index 000000000..a165f355a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dcmipp.c @@ -0,0 +1,2276 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_dcmipp.c + * @author MCD Application Team + * @brief DCMIPP HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DCMIPP (Digital Camera Interface Pixel Pipeline) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The sequence below describes how to use this driver to capture image + from a camera module connected to the DCMI Interface. + This sequence does not take into account the configuration of the + camera module, which should be made before to configure and enable + the DCMI to capture images. + + (#) Program the required configuration through the following parameters: + the Format, the VSPolarity,the HSPolarity, the PCKPolarity, the ExtendedDataMode + the SynchroMode, the SynchroCodes of the frame delimite, the SwapBits and the SwapCycles + using HAL_DCMIPP_Init() and HAL_DCMIPP_SetParallelConfig + (#) Program the required configuration through the following parameters: + the FrameRate using HAL_DCMIPP_PIPE_Config function. + + *** Interrupt mode IO operation *** + =================================== + (#) Configure Pipe parameter, destination (one or two) and Capture Mode (Snapshot or Continuous) and enable + the capture request using the following functions: + HAL_DCMIPP_PIPE_Start() or HAL_DCMIPP_PIPE_DoubleBufferStart(). + + (#) Use HAL_DCMIPP_IRQHandler() called under DCMIPP_IRQHandler() interrupt subroutine. + (#) At the end of frame capture request HAL_DCMIPP_IRQHandler() function is executed and user can + add his own function by customization of function pointer PipeFrameEventCallback (member + of DCMIPP handle structure). + (#) In case of common error, the HAL_DCMIPP_IRQHandler() function calls the callback + ErrorCallback otherwise in case of Pipe error + the HAL_DCMIPP_IRQHandler() function calls the callbackPipeErrorCallback. + + (#) The Pipe capture can be suspended and resumed using the following functions + HAL_DCMIPP_PIPE_Suspend() and HAL_DCMIPP_PIPE_Resume(). + + (#) For Snapshot Mode the capture can be re-enabled using the HAL_DCMIPP_PIPE_EnableCapture(); + + (#) Optionally, Program the required configuration through the following parameters: + Client, MemoryPageSize, Traffic, MaxOutstandingTransactions, DPREGStart, DPREGEnd + and WLRURatio using HAL_DCMIPP_SetIPPlugConfig(). + + (#) Optionally, configure and Enable the CROP feature to select a rectangular + window from the received image using HAL_DCMIPP_PIPE_SetCropConfig() + and HAL_DCMIPP_PIPE_EnableCrop() functions. + + (#) Optionally, configure and Enable the line and bytes decimation features + using the following functions HAL_DCMIPP_PIPE_SetLinesDecimationConfig and + HAL_DCMIPP_PIPE_SetBytesDecimationConfig. + + (#) Optionally, configure and enable the line event using the function HAL_DCMIPP_PIPE_EnableLineEvent(). + + (#) Optionally, configure and enable the Limit event using the function HAL_DCMIPP_PIPE_EnableLimitEvent(). + + (#) If needed, reconfigure and change the input pixel format value, the frame rate + value, the capture Mode , the destination memory address , the syncunmask values, + Multiline value and Limit value using respectively + the following functions: HAL_DCMIPP_PIPE_SetInputPixelFormat(), HAL_DCMIPP_PIPE_SetFrameRate(), + HAL_DCMIPP_PIPE_SetCaptureMode(), HAL_DCMIPP_PIPE_SetMemoryAddress(), HAL_DCMIPP_SetSyncUnmask(), + HAL_DCMIPP_PIPE_EnableLineEvent() and HAL_DCMIPP_PIPE_EnableLimitEvent(). + + (#) To read the transferred data counter , use the HAL_DCMIPP_PIPE_GetDataCounter() + + (#) To read and reset the Frame counter of the pipe, use the following functions: + HAL_DCMIPP_PIPE_ReadFrameCounter() and HAL_DCMIPP_PIPE_ResetFrameCounter(). + + (#) The Pipe capture can be Stopped using HAL_DCMIPP_PIPE_Stop() function. + + + (#) To control the DCMIPP state, use the following function: HAL_DCMIPP_GetState(). + + (#) To control the DCMIPP Pipe state, use the following function: HAL_DCMIPP_PIPE_GetState(). + + (#) To read the DCMIPP error code, use the following function: HAL_DCMIPP_GetError(). + + *** DCMIPP HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DCMIPP HAL driver : + + (+) __HAL_DCMIPP_GET_FLAG: Get the DCMIPP pending flags. + (+) __HAL_DCMIPP_CLEAR_FLAG: Clear the DCMIPP pending flags. + (+) __HAL_DCMIPP_ENABLE_IT: Enable the specified DCMIPP interrupts. + (+) __HAL_DCMIPP_DISABLE_IT: Disable the specified DCMIPP interrupts. + (+) __HAL_DCMIPP_GET_IT_SOURCE: Check whether the specified DCMIPP interrupt is enabled or not. + + *** Callback registration *** + =================================== + [..] + (#) The compilation define USE_HAL_DCMIPP_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function @ref HAL_DCMIPP_RegisterCallback() to register a user callback. + Use function @ref HAL_DCMIPP_PIPE_RegisterCallback() to register a user pipe callback. + + (#) Function @ref HAL_DCMIPP_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : callback for Error + (+) MspInitCallback : DCMIPP MspInit. + (+) MspDeInitCallback : DCMIPP MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + (#) Function @ref HAL_DCMIPP_PIPE_RegisterCallback() allows to register following callbacks: + (+) PipeFrameEventCallback : callback for Pipe Frame Event. + (+) PipeVsyncEventCallback : callback for Pipe Vsync Event. + (+) PipeLineEventCallback : callback for Pipe Line Event. + (+) PipeLimitEventCallback : callback for Pipe Limit Event. + (+) PipeErrorCallback : callback for Pipe Error + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (#) Use function @ref HAL_DCMIPP_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_DCMIPP_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ErrorCallback : callback for Error + (+) MspInitCallback : DCMIPP MspInit. + (+) MspDeInitCallback : DCMIPP MspDeInit. + (#) Use function @ref HAL_DCMIPP_PIPE_UnRegisterCallback() to reset a pipe callback to the default + weak (surcharged) function. + @ref HAL_DCMIPP_PIPE_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) PipeFrameEventCallback : callback for Pipe Frame Event. + (+) PipeVsyncEventCallback : callback for Pipe Vsync Event. + (+) PipeLineEventCallback : callback for Pipe Line Event. + (+) PipeLimitEventCallback : callback for Pipe Limit Event. + (+) PipeErrorCallback : callback for Pipe Error + + (#) By default, after the @ref HAL_DCMIPP_Init and if the state is HAL_DCMIPP_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions: + examples @ref PipeFrameEventCallback(), @ref PipeVsyncEventCallback() + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_DCMIPP_Init + and @ref HAL_DCMIPP_DeInit only when these callbacks are null (not registered beforehand) + If not, MspInit or MspDeInit are not null, the @ref HAL_DCMIPP_Init and @ref HAL_DCMIPP_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_DCMIPP_RegisterCallback before calling @ref HAL_DCMIPP_DeInit + or @ref HAL_DCMIPP_Init function. + + When The compilation define USE_HAL_DCMIPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + (@) You can refer to the DCMIPP HAL driver header file for more useful macros + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#ifdef HAL_DCMIPP_MODULE_ENABLED +#if defined (DCMIPP) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +/** @defgroup DCMIPP DCMIPP + * @brief DCMIPP HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DCMIPP_Private_Functions DCMIPP Private Functions + * @{ + */ +static void Pipe_Config(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, const DCMIPP_PipeConfTypeDef *pPipeConfig); +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DCMIPP_Private_Functions DCMIPP Private Functions + * @{ + */ +/** + * @brief Configure the Pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param pPipeConfig pointer to the pipe configuration structure + * @param Pipe + * @retval None + */ +static void Pipe_Config(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, const DCMIPP_PipeConfTypeDef *pPipeConfig) +{ + if (Pipe == DCMIPP_PIPE0) + { + /* Configure Pipe0 */ + /* Configure Frame Rate */ + MODIFY_REG(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_FRATE, pPipeConfig->FrameRate); + } +} +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DCMIPP_Exported_Functions DCMIPP Exported Functions + * @{ + */ + +/** @addtogroup DCMIPP_Initialization_De-Initialization_Functions DCMIPP Initialization De-Initialization Functions + * @brief Initialization and De-Initialization Functions + * @{ + */ + +/** + * @brief Initializes the DCMIPP according to the specified + * parameters in the DCMIPP_InitTypeDef and create the associated handle. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_Init(DCMIPP_HandleTypeDef *hdcmipp) +{ + uint32_t pipe_index; + + /* Check pointer validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_DCMIPP_ALL_INSTANCE(hdcmipp->Instance)); + + if (hdcmipp->State == HAL_DCMIPP_STATE_RESET) + { + /* Init the DCMIPP Callback settings */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hdcmipp->PIPE_FrameEventCallback = HAL_DCMIPP_PIPE_FrameEventCallback; /* Legacy weak PIPE_FrameEventCallback */ + hdcmipp->PIPE_VsyncEventCallback = HAL_DCMIPP_PIPE_VsyncEventCallback; /* Legacy weak PIPE_VsyncEventCallback */ + hdcmipp->PIPE_LineEventCallback = HAL_DCMIPP_PIPE_LineEventCallback; /* Legacy weak PIPE_LineEventCallback */ + hdcmipp->PIPE_LimitEventCallback = HAL_DCMIPP_PIPE_LimitEventCallback; /* Legacy weak PIPE_LimitEventCallback */ + hdcmipp->PIPE_ErrorCallback = HAL_DCMIPP_PIPE_ErrorCallback; /* Legacy weak PIPE_ErrorCallback */ + hdcmipp->ErrorCallback = HAL_DCMIPP_ErrorCallback; /* Legacy weak _ErrorCallback */ + + if (hdcmipp->MspInitCallback == NULL) + { + /* Legacy weak MspInit Callback */ + hdcmipp->MspInitCallback = HAL_DCMIPP_MspInit; + } + /* Initialize the low level hardware (MSP) */ + hdcmipp->MspInitCallback(hdcmipp); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_DCMIPP_MspInit(hdcmipp); +#endif /* (USE_HAL_DCMIPP_REGISTER_CALLBACKS) */ + } + + /* Change the DCMIPP state */ + hdcmipp->State = HAL_DCMIPP_STATE_BUSY; + + /* Reset DCMIPP Pipe state */ + for (pipe_index = 0U; pipe_index < DCMIPP_NUM_OF_PIPES; pipe_index++) + { + hdcmipp->PipeState[pipe_index] = HAL_DCMIPP_PIPE_STATE_RESET; + } + + /* Update error code */ + hdcmipp->ErrorCode = HAL_DCMIPP_ERROR_NONE; + + /* Update the DCMIPP state*/ + hdcmipp->State = HAL_DCMIPP_STATE_INIT; + + return HAL_OK; +} + +/** + * @brief De-initializes the DCMIPP peripheral registers to their default reset + * values. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_DeInit(DCMIPP_HandleTypeDef *hdcmipp) +{ + uint32_t pipe_index; + + /* Check pointer validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Disable the Parallel Interface */ + hdcmipp->Instance->PRCR &= ~DCMIPP_PRCR_ENABLE; + + /* Reset flow selection configuration register for the Pipe0 */ + hdcmipp->Instance->P0FSCR = 0; + +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + if (hdcmipp->MspDeInitCallback == NULL) + { + hdcmipp->MspDeInitCallback = HAL_DCMIPP_MspDeInit; + } + + /* DeInit the low level hardware */ + hdcmipp->MspDeInitCallback(hdcmipp); +#else + /* DeInit the low level hardware */ + HAL_DCMIPP_MspDeInit(hdcmipp); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + + /* Update error code */ + hdcmipp->ErrorCode = HAL_DCMIPP_ERROR_NONE; + + /* Initialize the DCMIPP state*/ + hdcmipp->State = HAL_DCMIPP_STATE_RESET; + + /* Reset DCMIPP Pipe state */ + for (pipe_index = 0U; pipe_index < DCMIPP_NUM_OF_PIPES; pipe_index++) + { + hdcmipp->PipeState[pipe_index] = HAL_DCMIPP_PIPE_STATE_RESET; + } + + return HAL_OK; +} + +/** + * @brief Initializes the DCMIPP MSP. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval None + */ +__weak void HAL_DCMIPP_MspInit(DCMIPP_HandleTypeDef *hdcmipp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdcmipp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initializes the DCMIPP MSP. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval None + */ +__weak void HAL_DCMIPP_MspDeInit(DCMIPP_HandleTypeDef *hdcmipp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdcmipp); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_MspDeInit could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup DCMIPP_Configuration_Functions DCMIPP Configuration Functions + * @brief Configuration Functions + * @{ + */ +/** + * @brief Configure the DCMIPP Parallel Interface according to the specified + * parameters in the pParallelConfig. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param pParallelConfig pointer to DCMIPP_ParallelConfTypeDef that contains + * the parallel Interface configuration information for DCMIPP. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PARALLEL_SetConfig(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_ParallelConfTypeDef *pParallelConfig) +{ + uint32_t prcr_reg; + uint32_t prescr_reg; + + /* Check parameters */ + if ((hdcmipp == NULL) || (pParallelConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_DCMIPP_FORMAT(pParallelConfig->Format)); + assert_param(IS_DCMIPP_VSPOLARITY(pParallelConfig->VSPolarity)); + assert_param(IS_DCMIPP_HSPOLARITY(pParallelConfig->HSPolarity)); + assert_param(IS_DCMIPP_PCKPOLARITY(pParallelConfig->PCKPolarity)); + assert_param(IS_DCMIPP_EXTENDED_DATA_MODE(pParallelConfig->ExtendedDataMode)); + assert_param(IS_DCMIPP_SYNC_MODE(pParallelConfig->SynchroMode)); + assert_param(IS_DCMIPP_SWAP_BITS(pParallelConfig->SwapBits)); + assert_param(IS_DCMIPP_SWAP_CYCLES(pParallelConfig->SwapCycles)); + + /* Check DCMIPP state */ + if (hdcmipp->State != HAL_DCMIPP_STATE_INIT) + { + return HAL_ERROR; + } + else + { + /* Configures the Format, VS, HS, PCK polarity, ExtendedDataMode, SynchronisationMode, Swap Cycles and bits */ + prcr_reg = ((pParallelConfig->Format) | \ + (pParallelConfig->VSPolarity) | \ + (pParallelConfig->HSPolarity) | \ + (pParallelConfig->PCKPolarity) | \ + (pParallelConfig->ExtendedDataMode) | \ + (pParallelConfig->SynchroMode) | \ + (pParallelConfig->SwapCycles) | \ + (pParallelConfig->SwapBits)); + + WRITE_REG(hdcmipp->Instance->PRCR, prcr_reg); + + if (pParallelConfig->SynchroMode == DCMIPP_SYNCHRO_EMBEDDED) + { + /* Set Embedded Sync codes */ + prescr_reg = (((uint32_t)pParallelConfig->SynchroCodes.FrameEndCode << DCMIPP_PRESCR_FEC_Pos) | \ + ((uint32_t)pParallelConfig->SynchroCodes.LineEndCode << DCMIPP_PRESCR_LEC_Pos) | \ + ((uint32_t)pParallelConfig->SynchroCodes.FrameStartCode << DCMIPP_PRESCR_FSC_Pos) | \ + ((uint32_t)pParallelConfig->SynchroCodes.LineStartCode << DCMIPP_PRESCR_LSC_Pos)); + + WRITE_REG(hdcmipp->Instance->PRESCR, prescr_reg); + + /* Set Embedded Sync Unmask codes : All codes are unmasked */ + WRITE_REG(hdcmipp->Instance->PRESUR, 0xFFFFFFFFU); + } + + /* Enable the Synchronization error interrupt on parallel interface */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_PARALLEL_SYNC_ERROR); + + /* Enable Parallel interface */ + SET_BIT(hdcmipp->Instance->PRCR, DCMIPP_PRCR_ENABLE); + + } + + /* Update the DCMIPP state */ + hdcmipp->State = HAL_DCMIPP_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief Configure pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for the DCMIPP. + * @param Pipe pipe to be configured can be a value from @ref DCMIPP_Pipes + * @param pPipeConfig pointer to pipe configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + const DCMIPP_PipeConfTypeDef *pPipeConfig) +{ + HAL_DCMIPP_PipeStateTypeDef pipe_state; + + /* Check the DCMIPP peripheral handle parameter and pPipeConfig parameter */ + if ((hdcmipp == NULL) || (pPipeConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DCMIPP_ALL_INSTANCE(hdcmipp->Instance)); + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_FRAME_RATE(pPipeConfig->FrameRate)); + /* Get Pipe State */ + pipe_state = hdcmipp->PipeState[Pipe]; + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + if ((pipe_state == HAL_DCMIPP_PIPE_STATE_RESET) || (pipe_state == HAL_DCMIPP_PIPE_STATE_ERROR)) + { + /* Update the DCMIPP PIPE state */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_BUSY; + + /* Initialize the DCMIPP Pipe registers */ + Pipe_Config(hdcmipp, Pipe, pPipeConfig); + + /* Update the DCMIPP pipe state */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_READY; + } + else + { + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the DCMIPP AXI master memory IP-Plug. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param pIPPlugConfig pointer to IPPLUG configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_SetIPPlugConfig(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_IPPlugConfTypeDef *pIPPlugConfig) +{ + uint32_t timeout = HAL_GetTick(); + + /* Check handle validity */ + if ((hdcmipp == NULL) || (pIPPlugConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DCMIPP_CLIENT(pIPPlugConfig->Client)); + assert_param(IS_DCMIPP_DPREG_END(pIPPlugConfig->DPREGEnd)); + assert_param(IS_DCMIPP_DPREG_START(pIPPlugConfig->DPREGStart)); + assert_param(IS_DCMIPP_MAX_OUTSTANDING_TRANSACTIONS(pIPPlugConfig->MaxOutstandingTransactions)); + assert_param(IS_DCMIPP_MEMORY_PAGE_SIZE(pIPPlugConfig->MemoryPageSize)); + assert_param(IS_DCMIPP_TRAFFIC(pIPPlugConfig->Traffic)); + assert_param(IS_DCMIPP_WLRU_RATIO(pIPPlugConfig->WLRURatio)); + + + if (hdcmipp->State != HAL_DCMIPP_STATE_RESET) + { + /* Request to lock the IP-Plug, to allow reconfiguration */ + SET_BIT(hdcmipp->Instance->IPGR2, DCMIPP_IPGR2_PSTART); + + do + { + timeout--; + if (timeout == 0U) + { + return HAL_ERROR; + } + } while ((hdcmipp->Instance->IPGR3 & DCMIPP_IPGR3_IDLE) != DCMIPP_IPGR3_IDLE); + } + else + { + return HAL_ERROR; + } + + /* IP-Plug is currently locked and can be reconfigured */ + + /* Set Memory page size */ + hdcmipp->Instance->IPGR1 = (pIPPlugConfig->MemoryPageSize); + + /* IP-PLUG Client1 configuration */ + switch (pIPPlugConfig->Client) + { + case DCMIPP_CLIENT1: + { + /* Set Traffic : Burst size and Maximum Outstanding transactions */ + hdcmipp->Instance->IPC1R1 = (pIPPlugConfig->Traffic | pIPPlugConfig->MaxOutstandingTransactions); + + /* Set End word and Start Word of the FIFO of the Clientx */ + hdcmipp->Instance->IPC1R2 = (pIPPlugConfig->WLRURatio << DCMIPP_IPC1R2_WLRU_Pos); + + /* Set End word and Start Word of the FIFO of the Clientx */ + hdcmipp->Instance->IPC1R3 = ((pIPPlugConfig->DPREGStart << DCMIPP_IPC1R3_DPREGSTART_Pos) | + (pIPPlugConfig->DPREGEnd << DCMIPP_IPC1R3_DPREGEND_Pos)); + break; + } + default: + break; + } + + /* No lock requested, IP-Plug runs on demand by background HW */ + CLEAR_BIT(hdcmipp->Instance->IPGR2, DCMIPP_IPGR2_PSTART); + + /* Enable DCMIPP_IT_AXI_TRANSFER_ERR */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_AXI_TRANSFER_ERROR); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup DCMIPP_IO_operation_Functions DCMIPP IO operation Functions + * @brief IO operation functions + * @{ + */ +/** + * @brief Enables DCMIPP capture on the specified pipe + * @param hdcmipp Pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe to be started can be a value from @ref DCMIPP_Pipes + * @param DstAddress the destination address + * @param CaptureMode DCMIPP capture mode for the pipe can be a value from @ref DCMIPP_Capture_Mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Start(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t DstAddress, + uint32_t CaptureMode) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_CAPTURE_MODE(CaptureMode)); + + /* Check pointer validity */ + if ((hdcmipp == NULL) || ((DstAddress & 0xFU) != 0U)) + { + return HAL_ERROR; + } + + /* Check DCMIPP pipe state */ + if (hdcmipp->PipeState[Pipe] != HAL_DCMIPP_PIPE_STATE_READY) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* Update the DCMIPP pipe State */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_BUSY; + + /* Set the capture mode */ + hdcmipp->Instance->P0FCTCR |= CaptureMode; + + /* Set the destination address */ + WRITE_REG(hdcmipp->Instance->P0PPM0AR1, DstAddress); + + /* Enable all required interrupts lines for the PIPE0 */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_FRAME | DCMIPP_IT_PIPE0_VSYNC | DCMIPP_IT_PIPE0_OVR | + DCMIPP_IT_AXI_TRANSFER_ERROR); + + /* Activate the Pipe */ + SET_BIT(hdcmipp->Instance->P0FSCR, DCMIPP_P0FSCR_PIPEN); + + /* Start the capture */ + SET_BIT(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + + +/** + * @brief Enables DCMIPP capture on the specified pipe with double buffering Mode Enabled + * @param hdcmipp Pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe to be started can be a value from @ref DCMIPP_Pipes + * @param DstAddress0 the first destination address + * @param DstAddress1 the second destination address + * @param CaptureMode DCMIPP capture mode for the pipe can be a value from @ref DCMIPP_Capture_Mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DoubleBufferStart(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t DstAddress0, + uint32_t DstAddress1, uint32_t CaptureMode) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_CAPTURE_MODE(CaptureMode)); + + /* Check pointer validity */ + if ((hdcmipp == NULL) || ((DstAddress0 & 0xFU) != 0U) || ((DstAddress1 & 0xFU) != 0U)) + { + return HAL_ERROR; + } + + /* Check DCMIPP pipe state */ + if (hdcmipp->PipeState[Pipe] != HAL_DCMIPP_PIPE_STATE_READY) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* Update the DCMIPP pipe State */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_BUSY; + + /* Set the capture mode */ + hdcmipp->Instance->P0FCTCR |= CaptureMode; + + /* Set the destination address */ + WRITE_REG(hdcmipp->Instance->P0PPM0AR1, DstAddress0); + + /* Set the second destination address */ + WRITE_REG(hdcmipp->Instance->P0PPM0AR2, DstAddress1); + + /* Enable Double buffering Mode */ + SET_BIT(hdcmipp->Instance->P0PPCR, DCMIPP_P0PPCR_DBM); + + /* Enable all required interrupts lines for the Pipe0 */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_FRAME | DCMIPP_IT_PIPE0_VSYNC | DCMIPP_IT_PIPE0_OVR); + + /* Activate the Pipe */ + SET_BIT(hdcmipp->Instance->P0FSCR, DCMIPP_P0FSCR_PIPEN); + + /* Start the capture */ + SET_BIT(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Stop DCMIPP capture on the specified pipe + * @param hdcmipp Pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe to be stopped can be a value from @ref DCMIPP_Pipes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Stop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + uint32_t timeout = HAL_GetTick(); + HAL_DCMIPP_PipeStateTypeDef pipe_state; + + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Check pointer validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Get Pipe State */ + pipe_state = hdcmipp->PipeState[Pipe]; + + /* Check DCMIPP Pipe state */ + if (pipe_state != HAL_DCMIPP_PIPE_STATE_RESET) + { + if (Pipe == DCMIPP_PIPE0) + { + /* Stop the capture */ + CLEAR_BIT(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); + + /* Check that the Capture Request is effectively stopped */ + do + { + timeout--; + if (timeout == 0U) + { + return HAL_ERROR; + } + } while ((hdcmipp->Instance->P0FCTCR & DCMIPP_P0FCTCR_CPTREQ) != 0U); + + /* Disable DBM when enabled */ + if ((hdcmipp->Instance->P0PPCR & DCMIPP_P0PPCR_DBM) == DCMIPP_P0PPCR_DBM) + { + CLEAR_BIT(hdcmipp->Instance->P0PPCR, DCMIPP_P0PPCR_DBM); + } + + /* Disable the pipe */ + CLEAR_BIT(hdcmipp->Instance->P0FSCR, DCMIPP_P0FSCR_PIPEN); + + /* Disable all interrupts for this pipe */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_FRAME | DCMIPP_IT_PIPE0_VSYNC | DCMIPP_IT_PIPE0_LINE | \ + DCMIPP_IT_PIPE0_LIMIT | DCMIPP_IT_PIPE0_OVR); + + } + else + { + return HAL_ERROR; + } + + /* Update DCMIPP Pipe State */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Suspend DCMIPP Pipe capture + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe to be suspended can be a value from @ref DCMIPP_Pipes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Suspend(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + HAL_DCMIPP_PipeStateTypeDef pipe_state; + uint32_t timeout = HAL_GetTick(); + + assert_param(IS_DCMIPP_PIPE(Pipe)); + + if (hdcmipp == NULL) + { + /* Return Function Status */ + return HAL_ERROR; + } + + pipe_state = hdcmipp->PipeState[Pipe]; + + if (Pipe == DCMIPP_PIPE0) + { + /* Check Pipe0 State */ + if (pipe_state == HAL_DCMIPP_PIPE_STATE_BUSY) + { + /* Disable Capture Request */ + hdcmipp->Instance->P0FCTCR &= ~DCMIPP_P0FCTCR_CPTREQ; + /* Change Pipe State */ + hdcmipp->PipeState[0] = HAL_DCMIPP_PIPE_STATE_SUSPEND; + + /* Check if the DCMIPP capture effectively disabled */ + do + { + timeout-- ; + if (timeout == 0U) + { + /* Change Pipe State */ + hdcmipp->PipeState[Pipe] = HAL_DCMIPP_PIPE_STATE_ERROR; + + return HAL_ERROR; + } + } while ((hdcmipp->Instance->P0FCTCR & DCMIPP_P0FCTCR_CPTREQ) != 0U); + + } + else + { + /* Return Function Status */ + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + /* Return Function Status */ + return HAL_OK; +} + +/** + * @brief Resume DCMIPP Pipe capture + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe Pipe to be resumed can be a value from @ref DCMIPP_Pipes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_Resume(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + HAL_DCMIPP_PipeStateTypeDef pipe_state ; + + assert_param(IS_DCMIPP_PIPE(Pipe)); + + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + pipe_state = hdcmipp->PipeState[Pipe]; + + if (Pipe == DCMIPP_PIPE0) + { + /* Check Pipe0 State */ + if (pipe_state == HAL_DCMIPP_PIPE_STATE_SUSPEND) + { + /* Enable Capture Request */ + hdcmipp->Instance->P0FCTCR |= DCMIPP_P0FCTCR_CPTREQ; + + /* Change Pipe State */ + hdcmipp->PipeState[0] = HAL_DCMIPP_PIPE_STATE_BUSY; + } + else + { + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup DCMIPP_IRQ_and_Callbacks_Functions DCMIPP IRQ and Callbacks Functions + * @brief IRQ and Callbacks functions + * @{ + */ + +/** @addtogroup DCMIPP_IRQHandler_Functions IRQHandler Functions + * @{ + */ +/** + * @brief Handles DCMIPP interrupt request. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for the DCMIPP. + * @retval None + */ +void HAL_DCMIPP_IRQHandler(DCMIPP_HandleTypeDef *hdcmipp) +{ + uint32_t cmsr2flags = READ_REG(hdcmipp->Instance->CMSR2); + uint32_t cmierflags = READ_REG(hdcmipp->Instance->CMIER); + + /* ========================= PIPE0 INTERRUPTS ==================== */ + /* Limit error on the PIPE0 ********************************************/ + if ((cmsr2flags & DCMIPP_FLAG_PIPE0_LIMIT) != 0U) + { + if ((cmierflags & DCMIPP_IT_PIPE0_LIMIT) != 0U) + { + /* Disable Limit error Interrupt for pipe0 */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_LIMIT); + + /* Update error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_PIPE0_LIMIT; + + /* Clear the Limit error flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PIPE0_LIMIT); + + /* LIMIT Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->PIPE_LimitEventCallback(hdcmipp, DCMIPP_PIPE0); +#else + HAL_DCMIPP_PIPE_LimitEventCallback(hdcmipp, DCMIPP_PIPE0); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + /* VSYNC interrupt management **********************************************/ + if ((cmsr2flags & DCMIPP_FLAG_PIPE0_VSYNC) != 0U) + { + if ((cmierflags & DCMIPP_IT_PIPE0_VSYNC) != 0U) + { + /* Clear the VSYNC flag for pipe0 */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PIPE0_VSYNC); + + /* VSYNC Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->PIPE_VsyncEventCallback(hdcmipp, DCMIPP_PIPE0); +#else + HAL_DCMIPP_PIPE_VsyncEventCallback(hdcmipp, DCMIPP_PIPE0); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + /* FRAME interrupt management ****************************/ + if ((cmsr2flags & DCMIPP_FLAG_PIPE0_FRAME) != 0U) + { + if ((cmierflags & DCMIPP_IT_PIPE0_FRAME) != 0U) + { + /* When snapshot mode, disable Vsync, Error and Overrun interrupts */ + if ((hdcmipp->Instance->P0FCTCR & DCMIPP_P0FCTCR_CPTMODE) == DCMIPP_MODE_SNAPSHOT) + { + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_FRAME | DCMIPP_IT_PIPE0_VSYNC | DCMIPP_IT_PIPE0_OVR); + + /* Update Pipe State */ + hdcmipp->PipeState[0] = HAL_DCMIPP_PIPE_STATE_READY; + } + + /* Clear the End of Frame flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PIPE0_FRAME); + + /* Frame Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->PIPE_FrameEventCallback(hdcmipp, DCMIPP_PIPE0); +#else + HAL_DCMIPP_PIPE_FrameEventCallback(hdcmipp, DCMIPP_PIPE0); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + /* LINE interrupt management **********************************************/ + if ((cmsr2flags & DCMIPP_FLAG_PIPE0_LINE) != 0U) + { + if ((cmierflags & DCMIPP_IT_PIPE0_LINE) != 0U) + { + /* Clear the LINE flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PIPE0_LINE); + + /* LINE Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->PIPE_LineEventCallback(hdcmipp, DCMIPP_PIPE0); +#else + HAL_DCMIPP_PIPE_LineEventCallback(hdcmipp, DCMIPP_PIPE0); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + /* Overrun error interrupt for Pipe0 ***************************************/ + if ((cmsr2flags & DCMIPP_FLAG_PIPE0_OVR) != 0U) + { + if ((cmierflags & DCMIPP_IT_PIPE0_OVR) != 0U) + { + /* Disable Overrun Error Interrupt for pipe0 */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_OVR); + + /* Update error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_PIPE0_OVR; + + /* Clear the overrun error flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PIPE0_OVR); + + /* Change DCMIPP Pipe state */ + hdcmipp->PipeState[0] = HAL_DCMIPP_PIPE_STATE_ERROR; + + /* Error Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->PIPE_ErrorCallback(hdcmipp, DCMIPP_PIPE0); +#else + HAL_DCMIPP_PIPE_ErrorCallback(hdcmipp, DCMIPP_PIPE0); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + + /* Synchronization Error Interrupt on the parallel interface **************/ + if ((cmsr2flags & DCMIPP_FLAG_PARALLEL_SYNC_ERROR) != 0U) + { + if ((cmierflags & DCMIPP_IT_PARALLEL_SYNC_ERROR) != 0U) + { + /* Disable Synchronization error interrupt on parallel interface */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PARALLEL_SYNC_ERROR); + + /* Update error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_PARALLEL_SYNC; + + /* Clear the synchronization error flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_PARALLEL_SYNC_ERROR); + + /* Change DCMIPP state */ + hdcmipp->State = HAL_DCMIPP_STATE_ERROR; + + /* Error Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->ErrorCallback(hdcmipp); +#else + HAL_DCMIPP_ErrorCallback(hdcmipp); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } + + /* IPPLUG AXI transfer Error Interrupt *********************************/ + if ((cmsr2flags & DCMIPP_FLAG_AXI_TRANSFER_ERROR) != 0U) + { + if ((cmierflags & DCMIPP_IT_AXI_TRANSFER_ERROR) != 0U) + { + /* Disable IPPLUG AXI transfer Error Interrupt */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_AXI_TRANSFER_ERROR); + + /* Update error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_AXI_TRANSFER; + + /* Clear the AXI transfer error flag */ + __HAL_DCMIPP_CLEAR_FLAG(hdcmipp, DCMIPP_FLAG_AXI_TRANSFER_ERROR); + + /* Change DCMIPP state */ + hdcmipp->State = HAL_DCMIPP_STATE_ERROR; + + /* Error Callback */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) + hdcmipp->ErrorCallback(hdcmipp); +#else + HAL_DCMIPP_ErrorCallback(hdcmipp); +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ + } + } +} +/** + * @} + */ + +/** @addtogroup DCMIPP_Callback_Functions Callback Functions + * @{ + */ +/** + * @brief Frame Event callback on the pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe to be configured + * @retval None + */ +__weak void HAL_DCMIPP_PIPE_FrameEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_FrameEventDumpPipeCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + UNUSED(hdcmipp); +} + +/** + * @brief Vsync Event callback on pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe to be configured + * @retval None + */ +__weak void HAL_DCMIPP_PIPE_VsyncEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_VsyncEventDumpPipeCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + UNUSED(hdcmipp); +} + + +/** + * @brief Line Event callback on the pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe to be configured + * @retval None + */ +__weak void HAL_DCMIPP_PIPE_LineEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_LineEventMainPipeCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + UNUSED(hdcmipp); +} + +/** + * @brief Limit callback on the Pipe0 + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe to be configured + * @retval None + */ +__weak void HAL_DCMIPP_PIPE_LimitEventCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_LimitEventDumpPipeCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + UNUSED(hdcmipp); +} + +/** + * @brief Error callback on the pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe to be configured + * @retval None + */ +__weak void HAL_DCMIPP_PIPE_ErrorCallback(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_SyncErrorEventCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + UNUSED(hdcmipp); +} + + +/** + * @brief Error callback on DCMIPP + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval None + */ +__weak void HAL_DCMIPP_ErrorCallback(DCMIPP_HandleTypeDef *hdcmipp) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DCMIPP_ErrorCallback could be implemented in the user file + */ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdcmipp); +} +/** + * @} + */ + +/** @addtogroup DCMIPP_RegisterCallback_Functions Register Callback Functions + * @{ + */ +#if (USE_HAL_DCMIPP_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DCMIPP Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdcmipp DCMIPP handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DCMIPP_ERROR_CB_ID DCMIPP Error callback ID + * @arg @ref HAL_DCMIPP_MSPINIT_CB_ID DCMIPP MspInit callback ID + * @arg @ref HAL_DCMIPP_MSPDEINIT_CB_ID DCMIPP MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DCMIPP_RegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, HAL_DCMIPP_CallbackIDTypeDef CallbackID, + pDCMIPP_CallbackTypeDef pCallback) +{ + + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + switch (CallbackID) + { + case HAL_DCMIPP_MSPINIT_CB_ID : + hdcmipp->MspInitCallback = pCallback; + break; + + case HAL_DCMIPP_MSPDEINIT_CB_ID : + hdcmipp->MspDeInitCallback = pCallback; + break; + + case HAL_DCMIPP_ERROR_CB_ID : + hdcmipp->ErrorCallback = pCallback; + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdcmipp->State == HAL_DCMIPP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DCMIPP_MSPINIT_CB_ID : + hdcmipp->MspInitCallback = pCallback; + break; + + case HAL_DCMIPP_MSPDEINIT_CB_ID : + hdcmipp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User DCMIPP Callback + * DCMIPP Callback is redirected to the weak (surcharged) predefined callback + * @param hdcmipp DCMIPP handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DCMIPP_ERROR_CB_ID DCMIPP Error callback ID + * @arg @ref HAL_DCMIPP_MSPINIT_CB_ID DCMIPP MspInit callback ID + * @arg @ref HAL_DCMIPP_MSPDEINIT_CB_ID DCMIPP MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_DCMIPP_UnRegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, HAL_DCMIPP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + switch (CallbackID) + { + case HAL_DCMIPP_MSPINIT_CB_ID : + hdcmipp->MspInitCallback = HAL_DCMIPP_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DCMIPP_MSPDEINIT_CB_ID : + hdcmipp->MspDeInitCallback = HAL_DCMIPP_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdcmipp->State == HAL_DCMIPP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DCMIPP_MSPINIT_CB_ID : + hdcmipp->MspInitCallback = HAL_DCMIPP_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DCMIPP_MSPDEINIT_CB_ID : + hdcmipp->MspDeInitCallback = HAL_DCMIPP_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User DCMIPP Pipe Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdcmipp DCMIPP handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DCMIPP_PIPE_FRAME_EVENT_CB_ID DCMIPP Pipe Frame event callback ID + * @arg @ref HAL_DCMIPP_PIPE_VSYNC_EVENT_CB_ID DCMIPP Pipe Vsync event callback ID + * @arg @ref HAL_DCMIPP_PIPE_LINE_EVENT_CB_ID DCMIPP Pipe Line event callback ID + * @arg @ref HAL_DCMIPP_PIPE_LIMIT_EVENT_CB_ID DCMIPP Pipe Limit event callback ID + * @arg @ref HAL_DCMIPP_PIPE_ERROR_CB_ID DCMIPP Pipe Error callback ID + * @param pCallback pointer to the Pipe Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_RegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, + HAL_DCMIPP_PIPE_CallbackIDTypeDef CallbackID, + pDCMIPP_PIPE_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + switch (CallbackID) + { + case HAL_DCMIPP_PIPE_FRAME_EVENT_CB_ID : + hdcmipp->PIPE_FrameEventCallback = pCallback; + break; + + case HAL_DCMIPP_PIPE_VSYNC_EVENT_CB_ID : + hdcmipp->PIPE_VsyncEventCallback = pCallback; + break; + + case HAL_DCMIPP_PIPE_LINE_EVENT_CB_ID : + hdcmipp->PIPE_LineEventCallback = pCallback; + break; + + case HAL_DCMIPP_PIPE_LIMIT_EVENT_CB_ID : + hdcmipp->PIPE_LimitEventCallback = pCallback; + break; + + case HAL_DCMIPP_PIPE_ERROR_CB_ID : + hdcmipp->PIPE_ErrorCallback = pCallback; + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister a User DCMIPP Pipe Callback + * DCMIPP Callback is redirected to the weak (surcharged) predefined callback + * @param hdcmipp DCMIPP handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DCMIPP_PIPE_FRAME_EVENT_CB_ID DCMIPP Pipe Frame event callback ID + * @arg @ref HAL_DCMIPP_PIPE_VSYNC_EVENT_CB_ID DCMIPP Pipe Vsync event callback ID + * @arg @ref HAL_DCMIPP_PIPE_LINE_EVENT_CB_ID DCMIPP Pipe Line event callback ID + * @arg @ref HAL_DCMIPP_PIPE_LIMIT_EVENT_CB_ID DCMIPP Pipe Limit event callback ID + * @arg @ref HAL_DCMIPP_PIPE_ERROR_CB_ID DCMIPP Pipe Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_UnRegisterCallback(DCMIPP_HandleTypeDef *hdcmipp, + HAL_DCMIPP_PIPE_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + switch (CallbackID) + { + case HAL_DCMIPP_PIPE_FRAME_EVENT_CB_ID : + hdcmipp->PIPE_FrameEventCallback = HAL_DCMIPP_PIPE_FrameEventCallback; + break; + + case HAL_DCMIPP_PIPE_VSYNC_EVENT_CB_ID : + hdcmipp->PIPE_VsyncEventCallback = HAL_DCMIPP_PIPE_VsyncEventCallback; + break; + + case HAL_DCMIPP_PIPE_LINE_EVENT_CB_ID : + hdcmipp->PIPE_LineEventCallback = HAL_DCMIPP_PIPE_LineEventCallback; + break; + + case HAL_DCMIPP_PIPE_LIMIT_EVENT_CB_ID : + hdcmipp->PIPE_LimitEventCallback = HAL_DCMIPP_PIPE_LimitEventCallback; + break; + + case HAL_DCMIPP_PIPE_ERROR_CB_ID : + hdcmipp->PIPE_ErrorCallback = HAL_DCMIPP_PIPE_ErrorCallback; + break; + + default : + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdcmipp->ErrorCode |= HAL_DCMIPP_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_DCMIPP_REGISTER_CALLBACKS */ +/** + * @} + */ +/** + * @} + */ +/** @defgroup DCMIPP_Crop_Functions DCMIPP Crop Functions + * @{ + */ +/** + * @brief Configure the DCMIPP CROP coordinate. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param pCropConfig pointer to DCMIPP_CropConfTypeDef structure that contains + * the configuration information for Crop + * @param Pipe pipe where crop is configured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetCropConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + const DCMIPP_CropConfTypeDef *pCropConfig) +{ + uint32_t tmp; + + /* Check handle validity */ + if ((hdcmipp == NULL) || (pCropConfig == NULL)) + { + return HAL_ERROR; + } + + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_PIPE_CROP_AREA(pCropConfig->PipeArea)); + assert_param(IS_DCMIPP_PIPE_CROP_HSTART(pCropConfig->HStart)); + assert_param(IS_DCMIPP_PIPE_CROP_HSIZE(pCropConfig->HSize)); + assert_param(IS_DCMIPP_PIPE_CROP_VSIZE(pCropConfig->VSize)); + assert_param(IS_DCMIPP_PIPE_CROP_VSTART(pCropConfig->VStart)); + + /* Check the DCMIPP State */ + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + + if (Pipe == DCMIPP_PIPE0) + { + tmp = READ_REG(hdcmipp->Instance->PRCR); + + /* Verify for parallel mode with jpeg format , no Line Crop enable */ + if (((tmp & DCMIPP_PRCR_ENABLE) == DCMIPP_PRCR_ENABLE) && ((tmp & DCMIPP_PRCR_FORMAT) == DCMIPP_FORMAT_BYTE)) + { + return HAL_ERROR; + } + else + { + /* Set Cropping horizontal and vertical start for Pipe0 */ + MODIFY_REG(hdcmipp->Instance->P0SCSTR, DCMIPP_P0SCSTR_HSTART | DCMIPP_P0SCSTR_VSTART, + (pCropConfig->HStart << DCMIPP_P0SCSTR_HSTART_Pos) | + (pCropConfig->VStart << DCMIPP_P0SCSTR_VSTART_Pos)); + + /* Set Cropping horizontal and vertical width for Pipe0 */ + /* Set crop Area (Inner or outer) for Pipe0 */ + MODIFY_REG(hdcmipp->Instance->P0SCSZR, DCMIPP_P0SCSZR_HSIZE | DCMIPP_P0SCSZR_VSIZE | DCMIPP_P0SCSZR_POSNEG, + (pCropConfig->HSize << DCMIPP_P0SCSZR_HSIZE_Pos) | (pCropConfig->VSize << DCMIPP_P0SCSZR_VSIZE_Pos) | + (pCropConfig->PipeArea)); + } + } + else + { + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Enable the Crop feature. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe where crop is enabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableCrop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + uint32_t tmp; + + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Check handle validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + if (Pipe == DCMIPP_PIPE0) + { + /* This bit must be kept cleared if the input format is JPEG */ + /* Verify for parallel mode with jpeg format , no Line Crop enable */ + + tmp = READ_REG(hdcmipp->Instance->PRCR); + + if (((tmp & DCMIPP_PRCR_ENABLE) == DCMIPP_PRCR_ENABLE) && ((tmp & DCMIPP_PRCR_FORMAT) == DCMIPP_FORMAT_BYTE)) + { + return HAL_ERROR; + } + else + { + SET_BIT(hdcmipp->Instance->P0SCSZR, DCMIPP_P0SCSZR_ENABLE); + } + } + else + { + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disable the Crop feature. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe pipe where crop is disabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableCrop(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Check handle validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + CLEAR_BIT(hdcmipp->Instance->P0SCSZR, DCMIPP_P0SCSZR_ENABLE); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup DCMIPP_Decimation_Functions DCMIPP Decimation Functions + * @{ + */ +/** + * @brief Configure the Bytes decimation for the selected Pipe. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where bytes decimation is enabled + * @param SelectStart can a be value from @ref DCMIPP_Byte_Start_Mode + * @param SelectMode can be a value from @ref DCMIPP_Byte_Select_Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetBytesDecimationConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t SelectStart, uint32_t SelectMode) +{ + uint32_t tmp; + + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_BYTE_SELECT_START(SelectStart)); + assert_param(IS_DCMIPP_BYTE_SELECT_MODE(SelectMode)); + + /* Check handle validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* OEBS : This bit works in conjunction with BSM field (BSM != 00) */ + /* Modes 10 and 11 work only with EDM [2:0] = 000 into the DCMIPP_PRCR */ + tmp = (hdcmipp->Instance->PRCR & DCMIPP_PRCR_EDM); + + if (((SelectStart == DCMIPP_OEBS_EVEN) && (SelectMode > DCMIPP_BSM_ALL)) || \ + ((SelectMode > DCMIPP_BSM_DATA_OUT_2) && (tmp != DCMIPP_INTERFACE_8BITS))) + { + return HAL_ERROR; + } + else + { + /* Set Bytes select Start and Bytes select Mode */ + MODIFY_REG(hdcmipp->Instance->P0PPCR, DCMIPP_P0PPCR_BSM | DCMIPP_P0PPCR_OEBS, (SelectStart | SelectMode)); + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the Lines decimation for the selected Pipe. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where Lines decimation is enabled + * @param SelectStart can a be value from @ref DCMIPP_Line_Start_Mode + * @param SelectMode can be a value from @ref DCMIPP_Line_Select_Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetLinesDecimationConfig(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t SelectStart, uint32_t SelectMode) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_LINE_SELECT_MODE(SelectMode)); + assert_param(IS_DCMIPP_LINE_SELECT_START(SelectStart)); + + /* Check handle validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* This bit works in conjunction with LSM field (LSM = 1) */ + if ((SelectStart == DCMIPP_OELS_EVEN) && (SelectMode == DCMIPP_LSM_ALTERNATE_2)) + { + return HAL_ERROR; + } + else + { + /* Set Lines select Start and Bytes select Mode */ + MODIFY_REG(hdcmipp->Instance->P0PPCR, DCMIPP_P0PPCR_LSM | DCMIPP_P0PPCR_OELS, (SelectStart | SelectMode)); + } + } + else + { + return HAL_ERROR; + } + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup DCMIPP_LimitEvent_Functions DCMIPP Limit Event Functions + * @{ + */ +/** + * @brief Define the Data dump limit for the Pipe0. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where Data limit is enabled + * @param Limit Data dump Limit. + * @note User application may resort to HAL_DCMIPP_PIPE_LimitCallback() at Limit interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableLimitEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Limit) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_DATA_LIMIT(Limit)); + + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* Set and enable data limit on Pipe 0 */ + WRITE_REG(hdcmipp->Instance->P0DCLMTR, (Limit << DCMIPP_P0DCLMTR_LIMIT_Pos) | DCMIPP_P0DCLMTR_ENABLE); + + /* Enable Limit Interrupt for pipe0 */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_LIMIT); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disable the the Limit interrupt. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where Limit interrupt is disabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableLimitEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* Disable data limit on Pipe 0 */ + CLEAR_BIT(hdcmipp->Instance->P0DCLMTR, DCMIPP_P0DCLMTR_ENABLE); + + /* Disable Limit Interrupt for pipe0 */ + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_LIMIT); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DCMIPP_PeripheralControl_Functions DCMIPP Peripheral Control Functions + * @{ + */ +/** + * @brief Reconfigure the Frame Rate for the selected pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDfef structure + * @param FrameRate the new Frame Rate value. + * @param Pipe Pipe to be reconfigured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetFrameRate(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t FrameRate) +{ + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_FRAME_RATE(FrameRate)); + + /* Set Frame Rate for the Pipe */ + if (Pipe == DCMIPP_PIPE0) + { + MODIFY_REG(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_FRATE, FrameRate); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reconfigure Capture Mode for the selected pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDfef structure + * @param CaptureMode the new Capture Mode value. + * @param Pipe Pipe to be reconfigured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetCaptureMode(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t CaptureMode) +{ + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_CAPTURE_MODE(CaptureMode)); + + + /* Set Capture Mode */ + if (Pipe == DCMIPP_PIPE0) + { + MODIFY_REG(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_CPTMODE, CaptureMode); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Re-Enable Capture for the selected pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDfef structure + * @param Pipe Pipe to be re-enable capture request + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableCapture(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Request Capture for the chosen Pipe */ + + if (Pipe == DCMIPP_PIPE0) + { + SET_BIT(hdcmipp->Instance->P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reconfigure the destination memory address for the selected pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDfef structure + * @param Memory the destination address to be changed can be value from DCMIPP. + * @param DstAddress the new destination address + * @param Pipe Pipe to be reconfigured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_SetMemoryAddress(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Memory, + uint32_t DstAddress) +{ + /* Check Parameters */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_MEMORY_ADDRESS(Memory)); + + /* Request Capture for the chosen Pipe */ + + if (Pipe == DCMIPP_PIPE0) + { + if (Memory == DCMIPP_MEMORY_ADDRESS_0) + { + /* Set Memory0 destination addresses for pipe0 */ + WRITE_REG(hdcmipp->Instance->P0PPM0AR1, DstAddress); + } + else + { + if ((hdcmipp->Instance->P0PPCR & DCMIPP_P0PPCR_DBM) == DCMIPP_P0PPCR_DBM) + { + /* Set Memory1 destination addresses for pipe0 */ + WRITE_REG(hdcmipp->Instance->P0PPM0AR2, DstAddress); + } + else + { + return HAL_ERROR; + } + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; + +} + +/** + * @brief Reconfigure the input pixel format for the selected pipe + * @param hdcmipp pointer to a DCMIPP_HandleTypeDfef structure + * @param InputPixelFormat new pixel format value. + * @param Pipe Pipe to be reconfigured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_PARALLEL_SetInputPixelFormat(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t InputPixelFormat) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_FORMAT(InputPixelFormat)); + + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + if (Pipe == DCMIPP_PIPE0) + { + /* Set Frame Rate */ + MODIFY_REG(hdcmipp->Instance->PRCR, DCMIPP_PRCR_FORMAT, InputPixelFormat); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} +/** + * @brief Set embedded synchronization delimiters unmasks. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param SyncUnmask pointer to a DCMIPP_SyncUnmaskTypeDef structure that contains + * the embedded synchronization delimiters unmasks. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PARALLEL_SetSyncUnmask(DCMIPP_HandleTypeDef *hdcmipp, + const DCMIPP_EmbeddedSyncUnmaskTypeDef *SyncUnmask) +{ + uint32_t presur_reg; + uint32_t prcr_reg; + + /* Check pointer validity */ + if ((hdcmipp == NULL) || (SyncUnmask == NULL)) + { + return HAL_ERROR; + } + + /* Check the DCMIPP State */ + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + prcr_reg = hdcmipp->Instance->PRCR; + /* Check that Embedded synchronisation mode is configured */ + if ((prcr_reg & DCMIPP_PRCR_ESS) == DCMIPP_SYNCHRO_EMBEDDED) + { + /* Configure DCMIPP embedded synchronization unmask register */ + presur_reg = (((uint32_t)SyncUnmask->FrameStartUnmask << DCMIPP_PRESUR_FSU_Pos) | \ + ((uint32_t)SyncUnmask->LineStartUnmask << DCMIPP_PRESUR_LSU_Pos) | \ + ((uint32_t)SyncUnmask->LineEndUnmask << DCMIPP_PRESUR_LEU_Pos) | \ + ((uint32_t)SyncUnmask->FrameEndUnmask << DCMIPP_PRESUR_FEU_Pos)); + + WRITE_REG(hdcmipp->Instance->PRESUR, presur_reg); + } + else + { + return HAL_ERROR; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DCMIPP_Line_Event_Functions DCMIPP Line Event Functions + * @{ + */ + +/** + * @brief Define the position of the line interrupt. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where Line event is enabled + * @param Line Line Interrupt Position. + * @note User application may resort to HAL_DCMIPP_PIPE_LineEventCallback() at line interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_EnableLineEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, uint32_t Line) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + assert_param(IS_DCMIPP_PIPE_MULTILINE(Line)); + + if (Pipe == DCMIPP_PIPE0) + { + /* Set MultiLine configuration */ + MODIFY_REG(hdcmipp->Instance->P0PPCR, DCMIPP_P0PPCR_LINEMULT, Line); + + /* Enable Multiline Interrupt */ + __HAL_DCMIPP_ENABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_LINE); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disable the the line event interrupt. + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe pipe where Line event is disabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_DisableLineEvent(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Disable Multiline Interrupt */ + if (Pipe == DCMIPP_PIPE0) + { + __HAL_DCMIPP_DISABLE_IT(hdcmipp, DCMIPP_IT_PIPE0_LINE); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + + + +/** + * @} + */ + +/** @defgroup DCMIPP_Frame_Counter_Functions DCMIPP Frame Counter Functions + * @{ + */ + +/** + * @brief Reset the DCMIPP Pipe frame counter + * @param Pipe Pipe selected to reset frame + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_ResetFrameCounter(DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + + /* Check pointer validity */ + if (hdcmipp == NULL) + { + return HAL_ERROR; + } + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + /* Check parameters */ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Check the DCMIPP State */ + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + /* Clear Frame counter */ + SET_BIT(hdcmipp->Instance->CMCR, DCMIPP_CMCR_CFC); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read the DCMIPP frame counter + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure + * @param Pipe Pipe selected to read frame counter + * @param pCounter pointer to store the value of the frame counter + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_ReadFrameCounter(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t *pCounter) +{ + + /* Check parameters */ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + /* Check pointer validity */ + if ((hdcmipp == NULL) || (pCounter == NULL)) + { + return HAL_ERROR; + } + + /* Check the DCMIPP State */ + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + /* Read frame counter */ + *pCounter = READ_REG(hdcmipp->Instance->CMFRCR); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup DCMIPP_Data_Counter_Functions DCMIPP Data Counter Functions + * @{ + */ +/** + * @brief Read Number of data dumped during the frame for the Pipe0 + * The counter saturates at 0x3FFFFFF. Granularity is 32-bit for all the + * formats except for the byte stream formats (e.g. JPEG) having byte granularity + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for the DCMIPP. + * @param Pipe Pipe selected to get data counter + * @param pCounter pointer to amount of word transferred + * @retval Status + */ +HAL_StatusTypeDef HAL_DCMIPP_PIPE_GetDataCounter(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe, + uint32_t *pCounter) +{ + /* Check parameters */ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Pipe); + /* Check pointer validity */ + if ((hdcmipp == NULL) || (pCounter == NULL)) + { + return HAL_ERROR; + } + + /* Check the DCMIPP State */ + if (hdcmipp->State == HAL_DCMIPP_STATE_READY) + { + /* Read Pipe0 dump counter register */ + *pCounter = READ_REG(hdcmipp->Instance->P0DCCNTR); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + + +/** + * @} + */ + +/** @defgroup DCMIPP_State_and_Error_Functions DCMIPP State and Error Functions + * @{ + */ + +/** + * @brief Return the DCMIPP state + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval HAL state + */ +HAL_DCMIPP_StateTypeDef HAL_DCMIPP_GetState(const DCMIPP_HandleTypeDef *hdcmipp) +{ + return hdcmipp->State; +} + +/** + * @brief Return the DCMIPP error code + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @retval DCMIPP Error Code + */ +uint32_t HAL_DCMIPP_GetError(const DCMIPP_HandleTypeDef *hdcmipp) +{ + return hdcmipp->ErrorCode; +} + +/** + * @brief Return the DCMIPP state + * @param hdcmipp pointer to a DCMIPP_HandleTypeDef structure that contains + * the configuration information for DCMIPP. + * @param Pipe Pipe selected to get state + * @retval HAL state + */ +HAL_DCMIPP_PipeStateTypeDef HAL_DCMIPP_PIPE_GetState(const DCMIPP_HandleTypeDef *hdcmipp, uint32_t Pipe) +{ + /* Check Parameters */ + assert_param(IS_DCMIPP_PIPE(Pipe)); + + return hdcmipp->PipeState[Pipe]; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* DCMIPP */ +#endif /* HAL_DCMIPP_MODULE_ENABLED */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma.c new file mode 100644 index 000000000..a8e45994b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma.c @@ -0,0 +1,1745 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dma.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following functionalities of the Direct Memory Access + * (DMA) peripheral: + * + Initialization/De-Initialization Functions + * + I/O Operation Functions + * + State and Errors Functions + * + DMA Attributes Functions + * + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + @verbatim + ====================================================================================================================== + ##### How to use this driver ##### + ====================================================================================================================== + [..] + (#) GPDMA and HPDMA are made available on this series. + Transfer could be done thanks to AXI or AHB ports. + + HPDMA support transmission through: + AXI port 0. + AHB port 1. + GPDMA allows transmission through: + GPDMA_P = port-0. + GPDMA_M = port-1 + + The following table list the supported configurations for HPDMA. + HPDMA support the following transfer + Table 1. HPDMA: supported transfer with source (SAP in CTR1 register) + / (DAP in CTR1 register) destination settings. + +-----------------------------------------------------------------------+ + | Destination|0 1 2 3 | 4 5 | 6 | 7 | 8 | 9 | + | Source | | | | | | | + |-----------------|--------|--------|--------|--------|--------|--------| + | 0 1 2 3 |0/0 |0/0-1 |0/0-1 |0/1 |0/0 |0/1 | + |-----------------|--------|--------|--------|--------|--------|--------| + | 4 5 |0-1/0 |0-1/0-1 |0-1/0-1 |0-1/1 |0-1/0 |0-1/1 | + +-----------------------------------------------------------------------+ + | 6 |0-1/0 |0-1/0-1 |0-1/0-1 |0-1/1 |0-1/0 |0-1/1 | + +-----------------------------------------------------------------------+ + | 7 |1/0 |1/0-1 |1/0-1 |1/1 |1/0 |1/1 | + +-----------------------------------------------------------------------+ + | 8 9 |0/0 |0/0-1 |0/0-1 |0/1 |0/0 |0/1 | + +-----------------------------------------------------------------------+ + | 10 11 |1/0 |1/0-1 |1/0-1 |1/1 |1/0 |1/1 | + +-----------------------------------------------------------------------+ + + Source: + 0 AXI_SRAM_IC1_L1 + 1 AXI_SRAM_IC2_L2 + 2 AXI_SRAM_IC3_L3 + 3 AXI_SRAM_IC4_L4 + 4 AHB_SRAM1_IC2_L0 + 5 AHB_SRAM2_IC2_L1 + 6 BACKUP_SRAM + 7 DTCM + 8 FLASH_IC1_L0 + 9 GFXMMU_RAM + 10 FDCAN_SRAM + 11 ITCM + + Destination: + 0 AXI_SRAM_IC1_L1 + 1 AXI_SRAM_IC2_L2 + 2 AXI_SRAM_IC3_L3 + 3 AXI_SRAM_IC4_L4 + 4 AHB_SRAM1_IC2_L0 + 5 AHB_SRAM2_IC2_L1 + 6 BACKUP_SRAM + 7 DTCM + 8 GFXMMU_RAM + 9 FDCAN_SRAM + + The following table list the supported configurations for GPDMA. + GPDMA support the following transfer + Table 2. GPDMA: supported transfer with source (SAP in CTR1 register) + / (DAP in CTR1 register) destination settings. + +-----------------------------------------------------------------------+ + | Destination|0 1 2 3 | 4 5 | 6 | 7 | 8 | 9 | + | Source | | | | | | | + |-----------------|--------|--------|--------|--------|--------|--------| + | 0 1 2 3 |0-1/0 |0-1/0-1 |0-1/0-1 | XXX | XXX |0-1/0-1 | + |-----------------|--------|--------|--------|--------|--------|--------| + | 4 5 |0-1/0 |0-1/0-1 |0-1/0-1 | XXX | XXX |0-1/0-1 | + +-----------------------------------------------------------------------+ + | 6 |0-1/0 |0-1/0-1 |0-1/0-1 | XXX | XXX |0-1/0-1 | + +-----------------------------------------------------------------------+ + | 7 | XXX | XXX | XXX | XXX | XXX | XXX | + +-----------------------------------------------------------------------+ + | 8 |0-1/0 |0-1/0-1 |0-1/0-1 | XXX | XXX |0-1/0-1 | + +-----------------------------------------------------------------------+ + | 9 | XXX | XXX | XXX | XXX | XXX | XXX | + +-----------------------------------------------------------------------+ + | 10 |0-1/0 |0-1/0-1 |0-1/0-1 | XXX | XXX |0-1/0-1 | + +-----------------------------------------------------------------------+ + | 11 | XXX | XXX | XXX | XXX | XXX | XXX | + +-----------------------------------------------------------------------+ + + Link-list transfer requires the nodes to be located in a memory than be be + accessed by the HPDMA or GPDMA. + + Table 3. HPDMA: supported linked-list node memory location versus Linked-List + allocated port (LPA in CCR register). + +--------------------------+ + | | Port | + | Node location | | + |-----------------|--------| + | 0 1 2 3 | 0 | + |-----------------|--------| + | 4 5 | 0-1 | + +--------------------------- + | 6 | 0-1 | + +--------------------------- + | 7 | 1 | + +--------------------------- + | 8 9 | 0 | + +--------------------------- + | 10 11 | 1 | + +--------------------------+ + + Table 4. GPDMA: supported linked-list node memory location versus Linked-List + allocated port (LPA in CCR register). + +--------------------------+ + | | Port | + | Node location | | + |-----------------|--------| + | 0 1 2 3 | 0-1 | + |-----------------|--------| + | 4 5 | 0-1 | + +--------------------------- + | 6 | 0-1 | + +--------------------------- + | 7 | XXX | + +--------------------------- + | 8 | 0-1 | + +--------------------------- + | 9 | XXX | + +--------------------------- + | 10 | 0-1 | + +--------------------------- + | 11 | XXX | + +--------------------------+ + + + When the HPDMA is used with the following peripherals: JPEG, XSPI1, XSPI2, + SPI3, SPI4, ADC1, ADC2, ADF1, UART4, UART5, UART7 or LPTIM2, + the AHB port 1 should be selected on the peripheral side. + + + + [..] + DMA transfer modes are divided to 2 major categories : + (+) Normal transfers (legacy) + (+) Linked-list transfers + + [..] + Normal transfers mode is initialized via the standard module and linked-list mode is configured via the extended + module. + + [..] + Additionally to linked-list capability, all advanced DMA features are managed and configured via the extended + module as extensions to normal mode. + Advanced features are : + (+) Repeated block feature. + (+) Trigger feature. + (+) Data handling feature. + + [..] + DMA Legacy circular transfer, is replaced by circular linked-list configuration. + + + *** Initialization and De-Initialization *** + ============================================ + [..] + For a given channel, enable and configure the peripheral to be connected to the DMA Channel (except for internal + SRAM/FLASH memories: no initialization is necessary) please refer to Reference manual for connection between + peripherals and DMA requests. + + [..] + For a given channel, use HAL_DMA_Init function to program the required configuration for normal transfer through + the following parameters: + + (+) Request : Specifies the DMA channel request + Request parameters : + (++) can be a value of DMA_Request_Selection + + (+) BlkHWRequest : Specifies the Block hardware request mode for DMA channel + (++) can be a value of DMA_Block_Request + + (+) Direction : Specifies the transfer direction for DMA channel + (++) can be a value of DMA_Transfer_Direction + + (+) SrcInc : Specifies the source increment mode for the DMA channel + (++) can be a value of DMA_Source_Increment_Mode + + (+) DestInc : Specifies the destination increment mode for the DMA channel + (++) can be a value of DMA_Destination_Increment_Mode + + (+) SrcDataWidth : Specifies the source data width for the DMA channel + (++) can be a value of DMA_Source_Data_Width + + (+) DestDataWidth : Specifies the destination data width for the DMA channel + (++) can be a value of DMA_Destination_Data_Width + + (+) Priority : Specifies the priority for the DMA channel + (++) can be a value of DMA_Priority_Level + + (+) SrcBurstLength : Specifies the source burst length (number of beats) for the DMA channel + (++) can be a value of between 1 and 64 + + (+) DestBurstLength : Specifies the destination burst length (number of beats) for the DMA channel + (++) can be a value of between 1 and 64 + + (+) TransferAllocatedPort : Specifies the source and destination allocated ports + (++) can be a value of DMA_Transfer_Allocated_Port + + (+) TransferEventMode : Specifies the transfer event mode for the DMA channel + (++) can be a value of DMA_Transfer_Event_Mode + + (+) Mode : Specifies the transfer mode for the DMA channel + (++) can be one of the following modes : + (+++) DMA_NORMAL : Normal Mode + (+++) DMA_PFCTRL : Peripheral Flow Control (peripheral early termination) Mode + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start a DMA normal transfer after the configuration of source address, destination + address and the size of data to be transferred. + + (+) Use HAL_DMA_PollForTransfer() to poll for selected transfer level. In this case a fixed Timeout can be + configured by User depending on his application. + Transfer level can be : + (++) HAL_DMA_HALF_TRANSFER + (++) HAL_DMA_FULL_TRANSFER + For circular transfer, this API returns an HAL_ERROR with HAL_DMA_ERROR_NOT_SUPPORTED error code. + + (+) Use HAL_DMA_Abort() function to abort any ongoing DMA transfer in blocking mode. + This API returns HAL_ERROR when there is no ongoing transfer or timeout is reached when disabling the DMA + channel. (This API should not be called from an interrupt service routine) + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + + (+) Use HAL_DMA_RegisterCallback() function to register user callbacks from the following list : + (++) XferCpltCallback : transfer complete callback. + (++) XferHalfCpltCallback : half transfer complete callback. + (++) XferErrorCallback : transfer error callback. + (++) XferAbortCallback : transfer abort complete callback. + (++) XferSuspendCallback : transfer suspend complete callback. + + (+) Use HAL_DMA_Start_IT() to start the DMA transfer after the enable of DMA interrupts and the configuration + of source address,destination address and the size of data to be transferred. + + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() interrupt subroutine to handle any DMA interrupt. + + (+) Use HAL_DMA_Abort_IT() function to abort any on-going DMA transfer in non-blocking mode. + This API will suspend immediately the DMA channel execution. When the transfer is effectively suspended, + an interrupt is generated and HAL_DMA_IRQHandler() will reset the channel and execute the callback + XferAbortCallback. (This API could be called from an interrupt service routine) + + + *** State and errors *** + ======================== + [..] + (+) Use HAL_DMA_GetState() function to get the DMA state. + (+) Use HAL_DMA_GetError() function to get the DMA error code. + + + *** Privilege attributes *** + ========================================= + [..] + (+) Use HAL_DMA_ConfigChannelAttributes() function to configure privilege attribute. + (++) Privilege : at channel level. + (+) Use HAL_DMA_GetConfigChannelAttributes() function to get the DMA channel attributes. + (+) Use HAL_DMA_LockChannelAttributes() function to lock the DMA channel privilege attribute + configuration. This API can be called once after each system boot. + If called again, HAL_DMA_ConfigChannelAttributes() API has no effect. + Unlock is done either by a system boot or a by an RCC reset. + (+) Use HAL_DMA_GetLockChannelAttributes() function to get the attributes lock status. + + + *** DMA HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE : Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE : Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG : Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG : Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT : Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT : Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE : Check whether the specified DMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the header file of the DMA HAL driver for more useful macros. + + @endverbatim + ********************************************************************************************************************** + */ + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef ---------------------------------------------------------------------------------------------------*/ +/* Private constants -------------------------------------------------------------------------------------------------*/ +/* Private macro -----------------------------------------------------------------------------------------------------*/ +/* Private variables -------------------------------------------------------------------------------------------------*/ +/* Private function prototypes ---------------------------------------------------------------------------------------*/ +static void DMA_SetConfig(DMA_HandleTypeDef const *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize); +static void DMA_Init(DMA_HandleTypeDef const *const hdma); + +/* Exported functions ------------------------------------------------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * +@verbatim + ====================================================================================================================== + ##### Initialization and de-initialization functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the DMA channel in normal mode. + + [..] + (+) The HAL_DMA_Init() function follows the DMA channel configuration procedures as described in reference manual. + (+) The HAL_DMA_DeInit() function allows to de-initialize the DMA channel. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA channel in normal mode according to the specified parameters in the DMA_InitTypeDef and + * create the associated handle. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *const hdma) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + if (hdma->Init.Direction != DMA_MEMORY_TO_MEMORY) + { + assert_param(IS_DMA_REQUEST(hdma->Init.Request)); + } + assert_param(IS_DMA_BLOCK_HW_REQUEST(hdma->Init.BlkHWRequest)); + assert_param(IS_DMA_SOURCE_INC(hdma->Init.SrcInc)); + assert_param(IS_DMA_DESTINATION_INC(hdma->Init.DestInc)); + assert_param(IS_DMA_SOURCE_DATA_WIDTH(hdma->Init.SrcDataWidth)); + assert_param(IS_DMA_DESTINATION_DATA_WIDTH(hdma->Init.DestDataWidth)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + assert_param(IS_DMA_TCEM_EVENT_MODE(hdma->Init.TransferEventMode)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + if (hdma->Init.Mode == DMA_PFCTRL) + { + assert_param(IS_DMA_PFREQ_INSTANCE(hdma->Instance)); + } + /* Check DMA channel instance */ + if ((IS_HPDMA_INSTANCE(hdma->Instance) != 0U) || (IS_GPDMA_INSTANCE(hdma->Instance) != 0U)) + { + assert_param(IS_DMA_BURST_LENGTH(hdma->Init.SrcBurstLength)); + assert_param(IS_DMA_BURST_LENGTH(hdma->Init.DestBurstLength)); + assert_param(IS_DMA_TRANSFER_ALLOCATED_PORT(hdma->Init.TransferAllocatedPort)); + } + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA channel is effectively disabled */ + while ((hdma->Instance->CCR & DMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Initialize the DMA channel registers */ + DMA_Init(hdma); + + /* Update DMA channel operation mode */ + hdma->Mode = hdma->Init.Mode; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA channel when it is configured in normal mode. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *const hdma) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + /* Disable the selected DMA Channel */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA channel is effectively disabled */ + while ((hdma->Instance->CCR & DMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Reset DMA Channel registers */ + hdma->Instance->CLBAR = 0U; + hdma->Instance->CCR = 0U; + hdma->Instance->CTR1 = 0U; + hdma->Instance->CTR2 = 0U; + hdma->Instance->CBR1 = 0U; + hdma->Instance->CSAR = 0U; + hdma->Instance->CDAR = 0U; + hdma->Instance->CLLR = 0U; + + /* Reset 2D Addressing registers */ + if (IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance) != 0U) + { + hdma->Instance->CTR3 = 0U; + hdma->Instance->CBR2 = 0U; + } + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC | DMA_FLAG_HT | DMA_FLAG_DTE | DMA_FLAG_ULE | DMA_FLAG_USE | DMA_FLAG_SUSP | + DMA_FLAG_TO)); + + /* Clean all callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + hdma->XferSuspendCallback = NULL; + + /* Clean DMA queue */ + hdma->LinkedListQueue = NULL; + + /* Clean DMA parent */ + if (hdma->Parent != NULL) + { + hdma->Parent = NULL; + } + + /* Update DMA channel operation mode */ + hdma->Mode = DMA_NORMAL; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * +@verbatim + ====================================================================================================================== + ##### IO operation functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Configure the source, destination address and data size and Start DMA transfer in normal mode + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + (+) Register and Unregister DMA callbacks + + [..] + (+) The HAL_DMA_Start() function allows to start the DMA channel transfer in normal mode (Blocking mode). + (+) The HAL_DMA_Start_IT() function allows to start the DMA channel transfer in normal mode (Non-blocking mode). + (+) The HAL_DMA_Abort() function allows to abort any on-going transfer (Blocking mode). + (+) The HAL_DMA_Abort_IT() function allows to abort any on-going transfer (Non-blocking mode). + (+) The HAL_DMA_PollForTransfer() function allows to poll on half transfer and transfer complete (Blocking mode). + This API cannot be used for circular transfers. + (+) The HAL_DMA_IRQHandler() function allows to handle any DMA channel interrupt (Non-blocking mode). + (+) The HAL_DMA_RegisterCallback() and HAL_DMA_UnRegisterCallback() functions allow respectively to register and + unregister user customized callbacks. + User callbacks are called under HAL_DMA_IRQHandler(). + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA channel transfer in normal mode (Blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for + * the specified DMA Channel. + * @param SrcAddress : The source data address. + * @param DstAddress : The destination data address. + * @param SrcDataSize : The length of data to be transferred from source to destination in bytes. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize) +{ + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_BLOCK_SIZE(SrcDataSize)); + + /* Process locked */ + __HAL_LOCK(hdma); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Configure the source address, destination address, the data size and clear flags */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, SrcDataSize); + + /* Enable DMA channel */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Starts the DMA channel transfer in normal mode with interrupts enabled (Non-blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param SrcAddress : The source data address. + * @param DstAddress : The destination data address. + * @param SrcDataSize : The length of data to be transferred from source to destination in bytes. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize) +{ + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_BLOCK_SIZE(SrcDataSize)); + + /* Process locked */ + __HAL_LOCK(hdma); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Configure the source address, destination address, the data size and clear flags */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, SrcDataSize); + + /* Enable common interrupts: Transfer Complete and Transfer Errors ITs */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_DTE | DMA_IT_ULE | DMA_IT_USE | DMA_IT_TO)); + + /* Check half transfer complete callback */ + if (hdma->XferHalfCpltCallback != NULL) + { + /* If Half Transfer complete callback is set, enable the corresponding IT */ + __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT); + } + + /* Check Half suspend callback */ + if (hdma->XferSuspendCallback != NULL) + { + /* If Transfer suspend callback is set, enable the corresponding IT */ + __HAL_DMA_ENABLE_IT(hdma, DMA_IT_SUSP); + } + + /* Enable DMA channel */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Abort any on-going DMA channel transfer (Blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @note After suspending a DMA channel, a wait until the DMA channel is effectively stopped is added. If a channel + * is suspended while a data transfer is on-going, the current data will be transferred and the channel will be + * effectively suspended only after the transfer of any on-going data is finished. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *const hdma) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Suspend the channel */ + hdma->Instance->CCR |= DMA_CCR_SUSP; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_SUSPEND; + + /* Check if the DMA Channel is suspended */ + while ((hdma->Instance->CSR & DMA_CSR_SUSPF) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ERROR; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Reset the channel */ + hdma->Instance->CCR |= DMA_CCR_RESET; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ABORT; + + /* Clear all status flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC | DMA_FLAG_HT | DMA_FLAG_DTE | DMA_FLAG_ULE | DMA_FLAG_USE | DMA_FLAG_SUSP | + DMA_FLAG_TO)); + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + + /* Clear remaining data size to ensure loading linked-list from memory next start */ + hdma->Instance->CBR1 = 0U; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Abort any on-going DMA channel transfer in interrupt mode (Non-blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *const hdma) +{ + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + else + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ABORT; + + /* Suspend the channel and activate suspend interrupt */ + hdma->Instance->CCR |= (DMA_CCR_SUSP | DMA_CCR_SUSPIE); + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer status (Blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param CompleteLevel : Specifies the DMA level complete. + * @param Timeout : Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *const hdma, + HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + uint32_t level_flag; + uint32_t tmp_csr; + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_LEVEL_COMPLETE(CompleteLevel)); + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + /* Polling mode is not supported in circular mode */ + if ((hdma->Mode & DMA_LINKEDLIST_CIRCULAR) == DMA_LINKEDLIST_CIRCULAR) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + level_flag = ((CompleteLevel == HAL_DMA_FULL_TRANSFER) ? DMA_FLAG_IDLE : DMA_FLAG_HT); + + /* Get DMA channel status */ + tmp_csr = hdma->Instance->CSR; + + while ((tmp_csr & level_flag) == 0U) + { + /* Check for the timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT; + + /* + If timeout, abort the current transfer. + Note that the Abort function will + - Clear all transfer flags. + - Unlock. + - Set the State. + */ + (void)HAL_DMA_Abort(hdma); + + return HAL_ERROR; + } + } + + /* Get a newer CSR register value */ + tmp_csr = hdma->Instance->CSR; + } + + /* Check trigger overrun flag */ + if ((tmp_csr & DMA_FLAG_TO) != 0U) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TO; + + /* Clear the error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_TO); + } + + /* Check error flags */ + if ((tmp_csr & (DMA_FLAG_DTE | DMA_FLAG_ULE | DMA_FLAG_USE)) != 0U) + { + /* Check the data transfer error flag */ + if ((tmp_csr & DMA_FLAG_DTE) != 0U) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DTE; + + /* Clear the error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_DTE); + } + + /* Check the update link error flag */ + if ((tmp_csr & DMA_FLAG_ULE) != 0U) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_ULE; + + /* Clear the error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_ULE); + } + + /* Check the user setting error flag */ + if ((tmp_csr & DMA_FLAG_USE) != 0U) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_USE; + + /* Clear the error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_USE); + } + + /* Reset the channel */ + hdma->Instance->CCR |= DMA_CCR_RESET; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + /* Clear the transfer level flag */ + if (CompleteLevel == HAL_DMA_HALF_TRANSFER) + { + /* Clear the Half Transfer flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_HT); + } + else if (CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the transfer flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC | DMA_FLAG_HT)); + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request (Non-blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval None. + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *const hdma) +{ + const DMA_TypeDef *p_dma_instance = GET_DMA_INSTANCE(hdma); + uint32_t global_it_flag = 1UL << (GET_DMA_CHANNEL(hdma) & 0x1FU); + + /* Global Interrupt Flag management *********************************************************************************/ + if (IS_DMA_GLOBAL_ACTIVE_FLAG(p_dma_instance, global_it_flag) == 0U) + { + return; /* the global interrupt flag for the current channel is down , nothing to do */ + } + + /* Data Transfer Error Interrupt management *************************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_DTE) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DTE) != 0U) + { + /* Clear the transfer error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_DTE); + + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DTE; + } + } + + /* Update Linked-list Error Interrupt management ********************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_ULE) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_ULE) != 0U) + { + /* Clear the update linked-list error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_ULE); + + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_ULE; + } + } + + /* User Setting Error Interrupt management **************************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_USE) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_USE) != 0U) + { + /* Clear the user setting error flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_USE); + + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_USE; + } + } + + /* Trigger Overrun Interrupt management *****************************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_TO) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TO) != 0U) + { + /* Clear the trigger overrun flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_TO); + + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TO; + } + } + + /* Half Transfer Complete Interrupt management **********************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_HT) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != 0U) + { + /* Clear the half transfer flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_HT); + + /* Check half transfer complete callback */ + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + + /* Suspend Transfer Interrupt management ****************************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_SUSP) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_SUSP) != 0U) + { + /* Clear the block transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_SUSP); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_ABORT) + { + /* Disable the suspend transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_SUSP); + + /* Reset the channel internal state and reset the FIFO */ + hdma->Instance->CCR |= DMA_CCR_RESET; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + + /* Clear remaining data size to ensure loading linked-list from memory next start */ + hdma->Instance->CBR1 = 0U; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Check transfer abort callback */ + if (hdma->XferAbortCallback != NULL) + { + /* Transfer abort callback */ + hdma->XferAbortCallback(hdma); + } + + return; + } + else + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_SUSPEND; + + /* Check transfer suspend callback */ + if (hdma->XferSuspendCallback != NULL) + { + /* Transfer suspend callback */ + hdma->XferSuspendCallback(hdma); + } + } + } + } + + /* Transfer Complete Interrupt management ***************************************************************************/ + if ((__HAL_DMA_GET_FLAG(hdma, DMA_FLAG_TC) != 0U)) + { + /* Check if interrupt source is enabled */ + if (__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != 0U) + { + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* If linked-list transfer */ + if (hdma->Instance->CLLR == 0U) + { + if (hdma->Instance->CBR1 == 0U) + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + } + } + } + else + { + /* If normal transfer */ + if (hdma->Instance->CBR1 == 0U) + { + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + } + } + + /* Clear TC and HT transfer flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC | DMA_FLAG_HT)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Check transfer complete callback */ + if (hdma->XferCpltCallback != NULL) + { + /* Channel Transfer Complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + + /* Manage error case ************************************************************************************************/ + if (hdma->ErrorCode != HAL_DMA_ERROR_NONE) + { + /* Reset the channel internal state and reset the FIFO */ + hdma->Instance->CCR |= DMA_CCR_RESET; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Check DMA channel transfer mode */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + /* Update the linked-list queue state */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Check transfer error callback */ + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } +} + +/** + * @brief Register callback according to specified ID. + * @note The HAL_DMA_RegisterCallback() may be called before HAL_DMA_Init() in HAL_DMA_STATE_RESET + * to register callbacks for HAL_DMA_MSPINIT_CB_ID and HAL_DMA_MSPDEINIT_CB_ID. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param CallbackID : User Callback identifier which could be a value of HAL_DMA_CallbackIDTypeDef enumeration. + * @param pCallback : Pointer to private callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *const hdma, + HAL_DMA_CallbackIDTypeDef CallbackID, + void (*const pCallback)(DMA_HandleTypeDef *const _hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Check callback ID */ + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + { + /* Register transfer complete callback */ + hdma->XferCpltCallback = pCallback; + break; + } + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + { + /* Register half transfer callback */ + hdma->XferHalfCpltCallback = pCallback; + break; + } + + case HAL_DMA_XFER_ERROR_CB_ID: + { + /* Register transfer error callback */ + hdma->XferErrorCallback = pCallback; + break; + } + + case HAL_DMA_XFER_ABORT_CB_ID: + { + /* Register abort callback */ + hdma->XferAbortCallback = pCallback; + break; + } + + case HAL_DMA_XFER_SUSPEND_CB_ID: + { + /* Register suspend callback */ + hdma->XferSuspendCallback = pCallback; + break; + } + + default: + { + /* Update error status */ + status = HAL_ERROR; + break; + } + } + } + else + { + /* Update error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister callback according to specified ID. + * @note The HAL_DMA_UnRegisterCallback() may be called before HAL_DMA_Init() in HAL_DMA_STATE_RESET + * to un-register callbacks for HAL_DMA_MSPINIT_CB_ID and HAL_DMA_MSPDEINIT_CB_ID. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param CallbackID : User Callback identifier which could be a value of HAL_DMA_CallbackIDTypeDef enum. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *const hdma, + HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Check callback ID */ + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + { + /* UnRegister transfer complete callback */ + hdma->XferCpltCallback = NULL; + break; + } + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + { + /* UnRegister half transfer callback */ + hdma->XferHalfCpltCallback = NULL; + break; + } + + case HAL_DMA_XFER_ERROR_CB_ID: + { + /* UnRegister transfer error callback */ + hdma->XferErrorCallback = NULL; + break; + } + + case HAL_DMA_XFER_ABORT_CB_ID: + { + /* UnRegister abort callback */ + hdma->XferAbortCallback = NULL; + break; + } + + case HAL_DMA_XFER_SUSPEND_CB_ID: + { + /* UnRegister suspend callback */ + hdma->XferSuspendCallback = NULL; + break; + } + + case HAL_DMA_XFER_ALL_CB_ID: + { + /* UnRegister all available callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + hdma->XferSuspendCallback = NULL; + break; + } + + default: + { + /* Update error status */ + status = HAL_ERROR; + break; + } + } + } + else + { + /* Update error status */ + status = HAL_ERROR; + } + + return status; +} +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * +@verbatim + ====================================================================================================================== + ##### State and Errors functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Check the DMA state + (+) Get error code + + [..] + (+) The HAL_DMA_GetState() function allows to get the DMA channel state. + (+) The HAL_DMA_DeInit() function allows to get the DMA channel error code. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA channel state. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval DMA state. + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef const *const hdma) +{ + /* Return the DMA channel state */ + return hdma->State; +} + +/** + * @brief Return the DMA channel error code. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval DMA Error Code. + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef const *const hdma) +{ + /* Return the DMA channel error code */ + return hdma->ErrorCode; +} +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group4 + * +@verbatim + ====================================================================================================================== + ##### DMA Attributes functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Configure DMA channel privilege attribute. + (+) Get DMA channel privilege attribute. + (+) Lock DMA channel privilege attribute configuration. + (+) Check whether DMA channel privilege attribute configuration is locked or not. + + [..] + (+) The HAL_DMA_ConfigChannelAttributes() function allows to configure DMA channel privilege attribute. + (+) The HAL_DMA_GetConfigChannelAttributes() function allows to get DMA channel privilege attribute + configuration. + (+) The HAL_DMA_LockChannelAttributes() function allows to lock the DMA channel privilege attribute. + (+) The HAL_DMA_GetLockChannelAttributes() function allows to get the DMA channel privilege attribute lock + status. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMA channel privilege attribute. + * @note These attributes cannot be modified when the corresponding lock state is enabled. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for + * the specified DMA Channel. + * @param ChannelAttributes : Specifies the DMA channel privilege attribute. + * This parameter can be a one or a combination of @ref DMA_Channel_Attributes. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_DMA_ConfigChannelAttributes(DMA_HandleTypeDef *const hdma, uint32_t ChannelAttributes) +{ + DMA_TypeDef *p_dma_instance; + uint32_t channel_idx; + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ATTRIBUTES(ChannelAttributes)); + + /* Get DMA instance */ + p_dma_instance = GET_DMA_INSTANCE(hdma); + + /* Get channel index */ + channel_idx = 1UL << (GET_DMA_CHANNEL(hdma) & 0x1FU); + + /* Check DMA channel privilege attribute management */ + if ((ChannelAttributes & DMA_CHANNEL_ATTR_PRIV_MASK) == DMA_CHANNEL_ATTR_PRIV_MASK) + { + /* Configure DMA channel privilege attribute */ + if ((ChannelAttributes & DMA_CHANNEL_PRIV) == DMA_CHANNEL_PRIV) + { + p_dma_instance->PRIVCFGR |= channel_idx; + } + else + { + p_dma_instance->PRIVCFGR &= (~channel_idx); + } + } + + return HAL_OK; +} + +/** + * @brief Get the DMA channel privilege attribute. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA Channel. + * @param pChannelAttributes : Pointer to the returned attributes. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_DMA_GetConfigChannelAttributes(DMA_HandleTypeDef const *const hdma, + uint32_t *const pChannelAttributes) +{ + const DMA_TypeDef *p_dma_instance; + uint32_t attributes; + uint32_t channel_idx; + + /* Check the DMA peripheral handle and channel attributes parameters */ + if ((hdma == NULL) || (pChannelAttributes == NULL)) + { + return HAL_ERROR; + } + + /* Get DMA instance */ + p_dma_instance = GET_DMA_INSTANCE(hdma); + + /* Get channel index */ + channel_idx = 1UL << (GET_DMA_CHANNEL(hdma) & 0x1FU); + + /* Get DMA channel privilege attribute */ + attributes = ((p_dma_instance->PRIVCFGR & channel_idx) == 0U) ? DMA_CHANNEL_NPRIV : DMA_CHANNEL_PRIV; + /* return value */ + *pChannelAttributes = attributes; + + return HAL_OK; +} + + + +/** + * @brief Lock the DMA channel privilege attribute. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_DMA_LockChannelAttributes(DMA_HandleTypeDef const *const hdma) +{ + DMA_TypeDef *p_dma_instance; + uint32_t channel_idx; + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Get DMA instance */ + p_dma_instance = GET_DMA_INSTANCE(hdma); + + /* Get channel index */ + channel_idx = 1UL << (GET_DMA_CHANNEL(hdma) & 0x1FU); + + /* Lock the DMA channel privilege attribute */ + p_dma_instance->RCFGLOCKR |= channel_idx; + + return HAL_OK; +} + + +/** + * @brief Get the privilege attribute lock state of a DMA channel. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param pLockState : Pointer to lock state (returned value can be DMA_CHANNEL_ATTRIBUTE_UNLOCKED or + * DMA_CHANNEL_ATTRIBUTE_LOCKED). + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMA_GetLockChannelAttributes(DMA_HandleTypeDef const *const hdma, uint32_t *const pLockState) +{ + const DMA_TypeDef *p_dma_instance; + uint32_t channel_idx; + + /* Check the DMA peripheral handle and lock state parameters */ + if ((hdma == NULL) || (pLockState == NULL)) + { + return HAL_ERROR; + } + + /* Get DMA instance */ + p_dma_instance = GET_DMA_INSTANCE(hdma); + + /* Get channel index */ + channel_idx = 1UL << (GET_DMA_CHANNEL(hdma) & 0x1FU); + + /* Get channel lock attribute state */ + *pLockState = ((p_dma_instance->RCFGLOCKR & channel_idx) == 0U) ? DMA_CHANNEL_ATTRIBUTE_UNLOCKED : \ + DMA_CHANNEL_ATTRIBUTE_LOCKED; + + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ + + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @brief DMA Private Functions + * @{ + */ + +/** + * @brief Set the DMA channel normal transfer parameters. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param SrcAddress : The source data address. + * @param DstAddress : The destination data address. + * @param SrcDataSize : The length of data to be transferred from source to destination in bytes. + * @retval None. + */ +static void DMA_SetConfig(DMA_HandleTypeDef const *const hdma, + uint32_t SrcAddress, + uint32_t DstAddress, + uint32_t SrcDataSize) +{ + /* Configure the DMA channel data size */ + MODIFY_REG(hdma->Instance->CBR1, DMA_CBR1_BNDT, (SrcDataSize & DMA_CBR1_BNDT)); + + /* Clear all interrupt flags */ + __HAL_DMA_CLEAR_FLAG(hdma, DMA_FLAG_TC | DMA_FLAG_HT | DMA_FLAG_DTE | DMA_FLAG_ULE | DMA_FLAG_USE | DMA_FLAG_SUSP | + DMA_FLAG_TO); + + /* Configure DMA channel source address */ + hdma->Instance->CSAR = SrcAddress; + + /* Configure DMA channel destination address */ + hdma->Instance->CDAR = DstAddress; +} + +/** + * @brief Initialize the DMA channel in normal mode according to the specified parameters in the DMA_InitTypeDef. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval None. + */ +static void DMA_Init(DMA_HandleTypeDef const *const hdma) +{ + uint32_t tmpreg; + + /* Prepare DMA Channel Control Register (CCR) value *****************************************************************/ + tmpreg = hdma->Init.Priority; + + /* Write DMA Channel Control Register (CCR) */ + MODIFY_REG(hdma->Instance->CCR, DMA_CCR_PRIO | DMA_CCR_LAP | DMA_CCR_LSM, tmpreg); + + /* Prepare DMA Channel Transfer Register (CTR1) value ***************************************************************/ + tmpreg = hdma->Init.DestInc | hdma->Init.DestDataWidth | hdma->Init.SrcInc | hdma->Init.SrcDataWidth; + + /* Add parameters specific to HPDMA and GPDMA */ + if ((IS_HPDMA_INSTANCE(hdma->Instance) != 0U) || (IS_GPDMA_INSTANCE(hdma->Instance) != 0U)) + { + tmpreg |= (hdma->Init.TransferAllocatedPort | + (((hdma->Init.DestBurstLength - 1U) << DMA_CTR1_DBL_1_Pos) & DMA_CTR1_DBL_1) | + (((hdma->Init.SrcBurstLength - 1U) << DMA_CTR1_SBL_1_Pos) & DMA_CTR1_SBL_1)); + } + + /* Write DMA Channel Transfer Register 1 (CTR1) */ + WRITE_REG(hdma->Instance->CTR1, tmpreg); + + /* Prepare DMA Channel Transfer Register 2 (CTR2) value *************************************************************/ + tmpreg = hdma->Init.BlkHWRequest | (hdma->Init.Request & DMA_CTR2_REQSEL) | hdma->Init.TransferEventMode; + + /* Memory to Peripheral Transfer */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + if ((IS_HPDMA_INSTANCE(hdma->Instance) != 0U) || (IS_GPDMA_INSTANCE(hdma->Instance) != 0U)) + { + tmpreg |= DMA_CTR2_DREQ; + } + } + /* Memory to Memory Transfer */ + else if ((hdma->Init.Direction) == DMA_MEMORY_TO_MEMORY) + { + tmpreg |= DMA_CTR2_SWREQ; + } + else + { + /* Nothing to do */ + } + + /* Set DMA channel operation mode */ + tmpreg |= hdma->Init.Mode; + + /* Write DMA Channel Transfer Register 2 (CTR2) */ + MODIFY_REG(hdma->Instance->CTR2, (DMA_CTR2_TCEM | DMA_CTR2_TRIGPOL | DMA_CTR2_TRIGSEL | DMA_CTR2_TRIGM | + DMA_CTR2_PFREQ | DMA_CTR2_BREQ | DMA_CTR2_DREQ | DMA_CTR2_SWREQ | + DMA_CTR2_REQSEL), tmpreg); + + + /* Write DMA Channel Block Register 1 (CBR1) ************************************************************************/ + WRITE_REG(hdma->Instance->CBR1, 0U); + + /* If 2D Addressing is supported by current channel */ + if (IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance) != 0U) + { + /* Write DMA Channel Transfer Register 3 (CTR3) *******************************************************************/ + WRITE_REG(hdma->Instance->CTR3, 0U); + + /* Write DMA Channel Block Register 2 (CBR2) **********************************************************************/ + WRITE_REG(hdma->Instance->CBR2, 0U); + } + + /* Write DMA Channel linked-list address register (CLLR) ************************************************************/ + WRITE_REG(hdma->Instance->CLLR, 0U); +} +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma2d.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma2d.c new file mode 100644 index 000000000..1466f4ec4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma2d.c @@ -0,0 +1,2186 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_dma2d.c + * @author MCD Application Team + * @brief DMA2D HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the DMA2D peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Program the required configuration through the following parameters: + the transfer mode, the output color mode and the output offset using + HAL_DMA2D_Init() function. + + (#) Program the required configuration through the following parameters: + the input color mode, the input color, the input alpha value, the alpha mode, + the red/blue swap mode, the inverted alpha mode and the input offset using + HAL_DMA2D_ConfigLayer() function for foreground or/and background layer. + + *** Polling mode IO operation *** + ================================= + [..] + (#) Configure pdata parameter (explained hereafter), destination and data length + and enable the transfer using HAL_DMA2D_Start(). + (#) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage + user can specify the value of timeout according to his end application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (#) Configure pdata parameter, destination and data length and enable + the transfer using HAL_DMA2D_Start_IT(). + (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() interrupt subroutine. + (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback (member + of DMA2D handle structure). + (#) In case of error, the HAL_DMA2D_IRQHandler() function calls the callback + XferErrorCallback. + + -@- In Register-to-Memory transfer mode, pdata parameter is the register + color, in Memory-to-memory or Memory-to-Memory with pixel format + conversion pdata is the source address. + + -@- Configure the foreground source address, the background source address, + the destination and data length then Enable the transfer using + HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT() + in interrupt mode. + + -@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions + are used if the memory to memory with blending transfer mode is selected. + + (#) Optionally, configure and enable the CLUT using HAL_DMA2D_CLUTLoad() in polling + mode or HAL_DMA2D_CLUTLoad_IT() in interrupt mode. + + (#) Optionally, configure the line watermark in using the API HAL_DMA2D_ProgramLineEvent(). + + (#) Optionally, configure the dead time value in the AHB clock cycle inserted between two + consecutive accesses on the AHB master port in using the API HAL_DMA2D_ConfigDeadTime() + and enable/disable the functionality with the APIs HAL_DMA2D_EnableDeadTime() or + HAL_DMA2D_DisableDeadTime(). + + (#) The transfer can be suspended, resumed and aborted using the following + functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort(). + + (#) The CLUT loading can be suspended, resumed and aborted using the following + functions: HAL_DMA2D_CLUTLoading_Suspend(), HAL_DMA2D_CLUTLoading_Resume(), + HAL_DMA2D_CLUTLoading_Abort(). + + (#) To control the DMA2D state, use the following function: HAL_DMA2D_GetState(). + + (#) To read the DMA2D error code, use the following function: HAL_DMA2D_GetError(). + + *** DMA2D HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA2D HAL driver : + + (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral. + (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags. + (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags. + (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts. + (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts. + (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt is enabled or not. + + *** Callback registration *** + =================================== + [..] + (#) The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function @ref HAL_DMA2D_RegisterCallback() to register a user callback. + + (#) Function @ref HAL_DMA2D_RegisterCallback() allows to register following callbacks: + (+) XferCpltCallback : callback for transfer complete. + (+) XferErrorCallback : callback for transfer error. + (+) LineEventCallback : callback for line event. + (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. + (+) MspInitCallback : DMA2D MspInit. + (+) MspDeInitCallback : DMA2D MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (#) Use function @ref HAL_DMA2D_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_DMA2D_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) XferCpltCallback : callback for transfer complete. + (+) XferErrorCallback : callback for transfer error. + (+) LineEventCallback : callback for line event. + (+) CLUTLoadingCpltCallback : callback for CLUT loading completion. + (+) MspInitCallback : DMA2D MspInit. + (+) MspDeInitCallback : DMA2D MspDeInit. + + (#) By default, after the @ref HAL_DMA2D_Init and if the state is HAL_DMA2D_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions: + examples @ref HAL_DMA2D_LineEventCallback(), @ref HAL_DMA2D_CLUTLoadingCpltCallback() + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the @ref HAL_DMA2D_Init + and @ref HAL_DMA2D_DeInit only when these callbacks are null (not registered beforehand) + If not, MspInit or MspDeInit are not null, the @ref HAL_DMA2D_Init and @ref HAL_DMA2D_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + Exception as well for Transfer Completion and Transfer Error callbacks that are not defined + as weak (surcharged) functions. They must be defined by the user to be resorted to. + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_DMA2D_RegisterCallback before calling @ref HAL_DMA2D_DeInit + or @ref HAL_DMA2D_Init function. + + When The compilation define USE_HAL_DMA2D_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + (@) You can refer to the DMA2D HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#ifdef HAL_DMA2D_MODULE_ENABLED +#if defined (DMA2D) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup DMA2D DMA2D + * @brief DMA2D HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup DMA2D_Private_Constants DMA2D Private Constants + * @{ + */ + +/** @defgroup DMA2D_TimeOut DMA2D Time Out + * @{ + */ +#define DMA2D_TIMEOUT_ABORT (1000U) /*!< 1s */ +#define DMA2D_TIMEOUT_SUSPEND (1000U) /*!< 1s */ +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup DMA2D_Private_Functions DMA2D Private Functions + * @{ + */ +static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height); +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions + * @{ + */ + +/** @defgroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DMA2D + (+) De-initialize the DMA2D + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA2D according to the specified + * parameters in the DMA2D_InitTypeDef and create the associated handle. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d) +{ + /* Check the DMA2D peripheral state */ + if (hdma2d == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance)); + assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode)); + assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode)); + assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset)); + assert_param(IS_DMA2D_ALPHA_INVERTED(hdma2d->Init.AlphaInverted)); + assert_param(IS_DMA2D_RB_SWAP(hdma2d->Init.RedBlueSwap)); + assert_param(IS_DMA2D_LOM_MODE(hdma2d->Init.LineOffsetMode)); + assert_param(IS_DMA2D_BYTES_SWAP(hdma2d->Init.BytesSwap)); + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + if (hdma2d->State == HAL_DMA2D_STATE_RESET) + { + /* Reset Callback pointers in HAL_DMA2D_STATE_RESET only */ + hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; + hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; + if (hdma2d->MspInitCallback == NULL) + { + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; + } + + /* Init the low level hardware */ + hdma2d->MspInitCallback(hdma2d); + } +#else + if (hdma2d->State == HAL_DMA2D_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hdma2d->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_DMA2D_MspInit(hdma2d); + } +#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* DMA2D CR register configuration -------------------------------------------*/ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_MODE | DMA2D_CR_LOM, hdma2d->Init.Mode | hdma2d->Init.LineOffsetMode); + + /* DMA2D OPFCCR register configuration ---------------------------------------*/ + MODIFY_REG(hdma2d->Instance->OPFCCR, DMA2D_OPFCCR_CM | DMA2D_OPFCCR_SB, + hdma2d->Init.ColorMode | hdma2d->Init.BytesSwap); + + /* DMA2D OOR register configuration ------------------------------------------*/ + MODIFY_REG(hdma2d->Instance->OOR, DMA2D_OOR_LO, hdma2d->Init.OutputOffset); + /* DMA2D OPFCCR AI and RBS fields setting (Output Alpha Inversion)*/ + MODIFY_REG(hdma2d->Instance->OPFCCR, (DMA2D_OPFCCR_AI | DMA2D_OPFCCR_RBS), + ((hdma2d->Init.AlphaInverted << DMA2D_OPFCCR_AI_Pos) | \ + (hdma2d->Init.RedBlueSwap << DMA2D_OPFCCR_RBS_Pos))); + + + /* Update error code */ + hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Deinitializes the DMA2D peripheral registers to their default reset + * values. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ + +HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d) +{ + + /* Check the DMA2D peripheral state */ + if (hdma2d == NULL) + { + return HAL_ERROR; + } + + /* Before aborting any DMA2D transfer or CLUT loading, check + first whether or not DMA2D clock is enabled */ + if (__HAL_RCC_DMA2D_IS_CLK_ENABLED() == 1U) + { + /* Abort DMA2D transfer if any */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) == DMA2D_CR_START) + { + if (HAL_DMA2D_Abort(hdma2d) != HAL_OK) + { + /* Issue when aborting DMA2D transfer */ + return HAL_ERROR; + } + } + else + { + /* Abort background CLUT loading if any */ + if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) + { + if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 0U) != HAL_OK) + { + /* Issue when aborting background CLUT loading */ + return HAL_ERROR; + } + } + else + { + /* Abort foreground CLUT loading if any */ + if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) + { + if (HAL_DMA2D_CLUTLoading_Abort(hdma2d, 1U) != HAL_OK) + { + /* Issue when aborting foreground CLUT loading */ + return HAL_ERROR; + } + } + } + } + } + + /* Reset DMA2D control registers*/ + hdma2d->Instance->CR = 0U; + hdma2d->Instance->IFCR = 0x3FU; + hdma2d->Instance->FGOR = 0U; + hdma2d->Instance->BGOR = 0U; + hdma2d->Instance->FGPFCCR = 0U; + hdma2d->Instance->BGPFCCR = 0U; + hdma2d->Instance->OPFCCR = 0U; + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + + if (hdma2d->MspDeInitCallback == NULL) + { + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; + } + + /* DeInit the low level hardware */ + hdma2d->MspDeInitCallback(hdma2d); + +#else + /* Carry on with de-initialization of low level hardware */ + HAL_DMA2D_MspDeInit(hdma2d); +#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */ + + /* Update error code */ + hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE; + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Initializes the DMA2D MSP. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_MspInit can be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the DMA2D MSP. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_MspDeInit can be implemented in the user file. + */ +} + +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DMA2D Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdma2d DMA2D handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID + * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID + * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID + * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID + * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID + * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID + * @retval status + */ +HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, + pDMA2D_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hdma2d); + + if (HAL_DMA2D_STATE_READY == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : + hdma2d->XferCpltCallback = pCallback; + break; + + case HAL_DMA2D_TRANSFERERROR_CB_ID : + hdma2d->XferErrorCallback = pCallback; + break; + + case HAL_DMA2D_LINEEVENT_CB_ID : + hdma2d->LineEventCallback = pCallback; + break; + + case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : + hdma2d->CLUTLoadingCpltCallback = pCallback; + break; + + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = pCallback; + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_DMA2D_STATE_RESET == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = pCallback; + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + return status; +} + +/** + * @brief Unregister a DMA2D Callback + * DMA2D Callback is redirected to the weak (surcharged) predefined callback + * @param hdma2d DMA2D handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DMA2D_TRANSFERCOMPLETE_CB_ID DMA2D transfer complete Callback ID + * @arg @ref HAL_DMA2D_TRANSFERERROR_CB_ID DMA2D transfer error Callback ID + * @arg @ref HAL_DMA2D_LINEEVENT_CB_ID DMA2D line event Callback ID + * @arg @ref HAL_DMA2D_CLUTLOADINGCPLT_CB_ID DMA2D CLUT loading completion Callback ID + * @arg @ref HAL_DMA2D_MSPINIT_CB_ID DMA2D MspInit callback ID + * @arg @ref HAL_DMA2D_MSPDEINIT_CB_ID DMA2D MspDeInit callback ID + * @note No weak predefined callbacks are defined for HAL_DMA2D_TRANSFERCOMPLETE_CB_ID or HAL_DMA2D_TRANSFERERROR_CB_ID + * @retval status + */ +HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma2d); + + if (HAL_DMA2D_STATE_READY == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_TRANSFERCOMPLETE_CB_ID : + hdma2d->XferCpltCallback = NULL; + break; + + case HAL_DMA2D_TRANSFERERROR_CB_ID : + hdma2d->XferErrorCallback = NULL; + break; + + case HAL_DMA2D_LINEEVENT_CB_ID : + hdma2d->LineEventCallback = HAL_DMA2D_LineEventCallback; + break; + + case HAL_DMA2D_CLUTLOADINGCPLT_CB_ID : + hdma2d->CLUTLoadingCpltCallback = HAL_DMA2D_CLUTLoadingCpltCallback; + break; + + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_DMA2D_STATE_RESET == hdma2d->State) + { + switch (CallbackID) + { + case HAL_DMA2D_MSPINIT_CB_ID : + hdma2d->MspInitCallback = HAL_DMA2D_MspInit; /* Legacy weak (surcharged) Msp Init */ + break; + + case HAL_DMA2D_MSPDEINIT_CB_ID : + hdma2d->MspDeInitCallback = HAL_DMA2D_MspDeInit; /* Legacy weak (surcharged) Msp DeInit */ + break; + + default : + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma2d); + return status; +} +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/** @defgroup DMA2D_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the pdata, destination address and data size then + start the DMA2D transfer. + (+) Configure the source for foreground and background, destination address + and data size then start a MultiBuffer DMA2D transfer. + (+) Configure the pdata, destination address and data size then + start the DMA2D transfer with interrupt. + (+) Configure the source for foreground and background, destination address + and data size then start a MultiBuffer DMA2D transfer with interrupt. + (+) Abort DMA2D transfer. + (+) Suspend DMA2D transfer. + (+) Resume DMA2D transfer. + (+) Enable CLUT transfer. + (+) Configure CLUT loading then start transfer in polling mode. + (+) Configure CLUT loading then start transfer in interrupt mode. + (+) Abort DMA2D CLUT loading. + (+) Suspend DMA2D CLUT loading. + (+) Resume DMA2D CLUT loading. + (+) Poll for transfer complete. + (+) handle DMA2D interrupt request. + (+) Transfer watermark callback. + (+) CLUT Transfer Complete callback. + + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA2D Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param pdata Configure the source memory Buffer address if + * Memory-to-Memory or Memory-to-Memory with pixel format + * conversion mode is selected, or configure + * the color value if Register-to-Memory mode is selected. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the DMA2D Transfer with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param pdata Configure the source memory Buffer address if + * the Memory-to-Memory or Memory-to-Memory with pixel format + * conversion mode is selected, or configure + * the color value if Register-to-Memory mode is selected. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height); + + /* Enable the transfer complete, transfer error and configuration error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the multi-source DMA2D Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param SrcAddress1 The source memory Buffer address for the foreground layer. + * @param SrcAddress2 The source memory Buffer address for the background layer. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) + { + /*blending & fixed FG*/ + WRITE_REG(hdma2d->Instance->FGCOLR, SrcAddress1); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress2, DstAddress, Width, Height); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_BG) + { + /*blending & fixed BG*/ + WRITE_REG(hdma2d->Instance->BGCOLR, SrcAddress2); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + else + { + /* Configure DMA2D Stream source2 address */ + WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Start the multi-source DMA2D Transfer with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param SrcAddress1 The source memory Buffer address for the foreground layer. + * @param SrcAddress2 The source memory Buffer address for the background layer. + * @param DstAddress The destination memory Buffer address. + * @param Width The width of data to be transferred from source + * to destination (expressed in number of pixels per line). + * @param Height The height of data to be transferred from source to destination (expressed in number of lines). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, + uint32_t DstAddress, uint32_t Width, uint32_t Height) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LINE(Height)); + assert_param(IS_DMA2D_PIXEL(Width)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) + { + /*blending & fixed FG*/ + WRITE_REG(hdma2d->Instance->FGCOLR, SrcAddress1); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress2, DstAddress, Width, Height); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_BG) + { + /*blending & fixed BG*/ + WRITE_REG(hdma2d->Instance->BGCOLR, SrcAddress2); + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + else + { + WRITE_REG(hdma2d->Instance->BGMAR, SrcAddress2); + + /* Configure the source, destination address and the data size */ + DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height); + } + + /* Enable the transfer complete, transfer error and configuration error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Enable the Peripheral */ + __HAL_DMA2D_ENABLE(hdma2d); + + return HAL_OK; +} + +/** + * @brief Abort the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t tickstart; + + /* Abort the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue) */ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the DMA2D is effectively disabled */ + while ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + + /* Disable the Transfer Complete, Transfer Error and Configuration Error interrupts */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC | DMA2D_IT_TE | DMA2D_IT_CE); + + /* Change the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Suspend the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t tickstart; + + /* Suspend the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue). */ + MODIFY_REG(hdma2d->Instance->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the DMA2D is effectively suspended */ + while ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == DMA2D_CR_START) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + hdma2d->State = HAL_DMA2D_STATE_SUSPEND; + } + else + { + /* Make sure SUSP bit is cleared since it is meaningless + when no transfer is on-going */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA2D Transfer. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d) +{ + /* Check the SUSP and START bits */ + if ((hdma2d->Instance->CR & (DMA2D_CR_SUSP | DMA2D_CR_START)) == (DMA2D_CR_SUSP | DMA2D_CR_START)) + { + /* Ongoing transfer is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + + /* Resume the DMA2D transfer */ + /* START bit is reset to make sure not to set it again, in the event the HW clears it + between the register read and the register write by the CPU (writing 0 has no + effect on START bitvalue). */ + CLEAR_BIT(hdma2d->Instance->CR, (DMA2D_CR_SUSP | DMA2D_CR_START)); + + return HAL_OK; +} + + +/** + * @brief Enable the DMA2D CLUT Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Enable the background CLUT loading */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + else + { + /* Enable the foreground CLUT loading */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, const DMA2D_CLUTCfgTypeDef *CLUTCfg, + uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, const DMA2D_CLUTCfgTypeDef *CLUTCfg, + uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg->CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg->Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg->pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg->Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg->CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is + * invited to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from + * code compactness, code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Start DMA2D CLUT Loading with interrupt enabled. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is + * invited to resort to HAL_DMA2D_CLUTStartLoad_IT() instead to benefit + * from code compactness, code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the background */ + SET_BIT(hdma2d->Instance->BGPFCCR, DMA2D_BGPFCCR_START); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + + /* Enable the CLUT Transfer Complete, transfer Error, configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Enable the CLUT loading for the foreground */ + SET_BIT(hdma2d->Instance->FGPFCCR, DMA2D_FGPFCCR_START); + } + + return HAL_OK; +} + +/** + * @brief Abort the DMA2D CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + uint32_t tickstart; + const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ + + /* Abort the CLUT loading */ + SET_BIT(hdma2d->Instance->CR, DMA2D_CR_ABORT); + + /* If foreground CLUT loading is considered, update local variables */ + if (LayerIdx == DMA2D_FOREGROUND_LAYER) + { + reg = &(hdma2d->Instance->FGPFCCR); + } + + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the CLUT loading is aborted */ + while ((*reg & DMA2D_BGPFCCR_START) != 0U) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_ABORT) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + + /* Disable the CLUT Transfer Complete, Transfer Error, Configuration Error and CLUT Access Error interrupts */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC | DMA2D_IT_TE | DMA2D_IT_CE | DMA2D_IT_CAE); + + /* Change the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Suspend the DMA2D CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + uint32_t tickstart; + uint32_t loadsuspended; + const __IO uint32_t *reg = &(hdma2d->Instance->BGPFCCR); /* by default, point at background register */ + + /* Suspend the CLUT loading */ + SET_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + + /* If foreground CLUT loading is considered, update local variables */ + if (LayerIdx == DMA2D_FOREGROUND_LAYER) + { + reg = &(hdma2d->Instance->FGPFCCR); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the CLUT loading is suspended */ + /* 1st condition: Suspend Check */ + loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; + /* 2nd condition: Not Start Check */ + loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; + while (loadsuspended == 0UL) + { + if ((HAL_GetTick() - tickstart) > DMA2D_TIMEOUT_SUSPEND) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + /* 1st condition: Suspend Check */ + loadsuspended = ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) ? 1UL : 0UL; + /* 2nd condition: Not Start Check */ + loadsuspended |= ((*reg & DMA2D_BGPFCCR_START) != DMA2D_BGPFCCR_START) ? 1UL : 0UL; + } + + /* Check whether or not a transfer is actually suspended and change the DMA2D state accordingly */ + if ((*reg & DMA2D_BGPFCCR_START) != 0U) + { + hdma2d->State = HAL_DMA2D_STATE_SUSPEND; + } + else + { + /* Make sure SUSP bit is cleared since it is meaningless + when no transfer is on-going */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA2D CLUT loading. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + /* Check the SUSP and START bits for background or foreground CLUT loading */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Background CLUT loading suspension check */ + if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) + { + if ((hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START) == DMA2D_BGPFCCR_START) + { + /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + } + } + else + { + /* Foreground CLUT loading suspension check */ + if ((hdma2d->Instance->CR & DMA2D_CR_SUSP) == DMA2D_CR_SUSP) + { + if ((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) == DMA2D_FGPFCCR_START) + { + /* Ongoing CLUT loading is suspended: change the DMA2D state before resuming */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + } + } + } + + /* Resume the CLUT loading */ + CLEAR_BIT(hdma2d->Instance->CR, DMA2D_CR_SUSP); + + return HAL_OK; +} + + +/** + + * @brief Polling for transfer complete or CLUT loading. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t layer_start; + __IO uint32_t isrflags = 0x0U; + + /* Polling for DMA2D transfer */ + if ((hdma2d->Instance->CR & DMA2D_CR_START) != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == 0U) + { + isrflags = READ_REG(hdma2d->Instance->ISR); + if ((isrflags & (DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) + { + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + } + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + } + /* Clear the transfer and configuration error flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE | DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + } + } + /* Polling for CLUT loading (foreground or background) */ + layer_start = hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START; + layer_start |= hdma2d->Instance->BGPFCCR & DMA2D_BGPFCCR_START; + if (layer_start != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == 0U) + { + isrflags = READ_REG(hdma2d->Instance->ISR); + if ((isrflags & (DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE)) != 0U) + { + if ((isrflags & DMA2D_FLAG_CAE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; + } + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + } + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + } + /* Clear the CLUT Access Error, Configuration Error and Transfer Error flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE | DMA2D_FLAG_CE | DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT; + + /* Change the DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_TIMEOUT; + } + } + } + } + + /* Clear the transfer complete and CLUT loading flags */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC | DMA2D_FLAG_CTC); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} +/** + * @brief Handle DMA2D interrupt request. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL status + */ +void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d) +{ + uint32_t isrflags = READ_REG(hdma2d->Instance->ISR); + uint32_t crflags = READ_REG(hdma2d->Instance->CR); + + /* Transfer Error Interrupt management ***************************************/ + if ((isrflags & DMA2D_FLAG_TE) != 0U) + { + if ((crflags & DMA2D_IT_TE) != 0U) + { + /* Disable the transfer Error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE; + + /* Clear the transfer error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE); + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* Configuration Error Interrupt management **********************************/ + if ((isrflags & DMA2D_FLAG_CE) != 0U) + { + if ((crflags & DMA2D_IT_CE) != 0U) + { + /* Disable the Configuration Error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE); + + /* Clear the Configuration error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* CLUT access Error Interrupt management ***********************************/ + if ((isrflags & DMA2D_FLAG_CAE) != 0U) + { + if ((crflags & DMA2D_IT_CAE) != 0U) + { + /* Disable the CLUT access error interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CAE); + + /* Clear the CLUT access error flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CAE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferErrorCallback != NULL) + { + /* Transfer error Callback */ + hdma2d->XferErrorCallback(hdma2d); + } + } + } + /* Transfer watermark Interrupt management **********************************/ + if ((isrflags & DMA2D_FLAG_TW) != 0U) + { + if ((crflags & DMA2D_IT_TW) != 0U) + { + /* Disable the transfer watermark interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TW); + + /* Clear the transfer watermark flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TW); + + /* Transfer watermark Callback */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + hdma2d->LineEventCallback(hdma2d); +#else + HAL_DMA2D_LineEventCallback(hdma2d); +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + + } + } + /* Transfer Complete Interrupt management ************************************/ + if ((isrflags & DMA2D_FLAG_TC) != 0U) + { + if ((crflags & DMA2D_IT_TC) != 0U) + { + /* Disable the transfer complete interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC); + + /* Clear the transfer complete flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + if (hdma2d->XferCpltCallback != NULL) + { + /* Transfer complete Callback */ + hdma2d->XferCpltCallback(hdma2d); + } + } + } + /* CLUT Transfer Complete Interrupt management ******************************/ + if ((isrflags & DMA2D_FLAG_CTC) != 0U) + { + if ((crflags & DMA2D_IT_CTC) != 0U) + { + /* Disable the CLUT transfer complete interrupt */ + __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CTC); + + /* Clear the CLUT transfer complete flag */ + __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC); + + /* Update error code */ + hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE; + + /* Change DMA2D state */ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + /* CLUT Transfer complete Callback */ +#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1) + hdma2d->CLUTLoadingCpltCallback(hdma2d); +#else + HAL_DMA2D_CLUTLoadingCpltCallback(hdma2d); +#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */ + } + } + +} + +/** + * @brief Transfer watermark callback. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_LineEventCallback can be implemented in the user file. + */ +} + +/** + * @brief CLUT Transfer Complete callback. + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval None + */ +__weak void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_DMA2D_CLUTLoadingCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup DMA2D_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the DMA2D foreground or background layer parameters. + (+) Configure the DMA2D CLUT transfer. + (+) Configure the line watermark + (+) Configure the dead time value. + (+) Enable or disable the dead time value functionality. + + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMA2D Layer according to the specified + * parameters in the DMA2D_HandleTypeDef. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx) +{ + const DMA2D_LayerCfgTypeDef *pLayerCfg; + uint32_t regMask; + uint32_t regValue; + + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_OFFSET(hdma2d->LayerCfg[LayerIdx].InputOffset)); + if (hdma2d->Init.Mode != DMA2D_R2M) + { + assert_param(IS_DMA2D_INPUT_COLOR_MODE(hdma2d->LayerCfg[LayerIdx].InputColorMode)); + if (hdma2d->Init.Mode != DMA2D_M2M) + { + assert_param(IS_DMA2D_ALPHA_MODE(hdma2d->LayerCfg[LayerIdx].AlphaMode)); + } + } + assert_param(IS_DMA2D_ALPHA_INVERTED(hdma2d->LayerCfg[LayerIdx].AlphaInverted)); + assert_param(IS_DMA2D_RB_SWAP(hdma2d->LayerCfg[LayerIdx].RedBlueSwap)); + + if ((LayerIdx == DMA2D_FOREGROUND_LAYER) && (hdma2d->LayerCfg[LayerIdx].InputColorMode == DMA2D_INPUT_YCBCR)) + { + assert_param(IS_DMA2D_CHROMA_SUB_SAMPLING(hdma2d->LayerCfg[LayerIdx].ChromaSubSampling)); + } + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + pLayerCfg = &hdma2d->LayerCfg[LayerIdx]; + + /* Prepare the value to be written to the BGPFCCR or FGPFCCR register */ + regValue = pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << DMA2D_BGPFCCR_AM_Pos) | \ + (pLayerCfg->AlphaInverted << DMA2D_BGPFCCR_AI_Pos) | (pLayerCfg->RedBlueSwap << DMA2D_BGPFCCR_RBS_Pos); + regMask = (DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA | DMA2D_BGPFCCR_AI | DMA2D_BGPFCCR_RBS); + + + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + regValue |= (pLayerCfg->InputAlpha & DMA2D_BGPFCCR_ALPHA); + } + else + { + regValue |= (pLayerCfg->InputAlpha << DMA2D_BGPFCCR_ALPHA_Pos); + } + + /* Configure the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write DMA2D BGPFCCR register */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, regMask, regValue); + + /* DMA2D BGOR register configuration -------------------------------------*/ + WRITE_REG(hdma2d->Instance->BGOR, pLayerCfg->InputOffset); + + /* DMA2D BGCOLR register configuration -------------------------------------*/ + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + WRITE_REG(hdma2d->Instance->BGCOLR, pLayerCfg->InputAlpha & (DMA2D_BGCOLR_BLUE | DMA2D_BGCOLR_GREEN | \ + DMA2D_BGCOLR_RED)); + } + } + /* Configure the foreground DMA2D layer */ + else + { + + if (pLayerCfg->InputColorMode == DMA2D_INPUT_YCBCR) + { + regValue |= (pLayerCfg->ChromaSubSampling << DMA2D_FGPFCCR_CSS_Pos); + regMask |= DMA2D_FGPFCCR_CSS; + } + + /* Write DMA2D FGPFCCR register */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, regMask, regValue); + + /* DMA2D FGOR register configuration -------------------------------------*/ + WRITE_REG(hdma2d->Instance->FGOR, pLayerCfg->InputOffset); + + /* DMA2D FGCOLR register configuration -------------------------------------*/ + if ((pLayerCfg->InputColorMode == DMA2D_INPUT_A4) || (pLayerCfg->InputColorMode == DMA2D_INPUT_A8)) + { + WRITE_REG(hdma2d->Instance->FGCOLR, pLayerCfg->InputAlpha & (DMA2D_FGCOLR_BLUE | DMA2D_FGCOLR_GREEN | \ + DMA2D_FGCOLR_RED)); + } + } + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Configure the DMA2D CLUT Transfer. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param CLUTCfg Pointer to a DMA2D_CLUTCfgTypeDef structure that contains + * the configuration information for the color look up table. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * DMA2D_BACKGROUND_LAYER(0) / DMA2D_FOREGROUND_LAYER(1) + * @note API obsolete and maintained for compatibility with legacy. User is invited + * to resort to HAL_DMA2D_CLUTStartLoad() instead to benefit from code compactness, + * code size and improved heap usage. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_DMA2D_LAYER(LayerIdx)); + assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode)); + assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size)); + + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Configure the CLUT of the background DMA2D layer */ + if (LayerIdx == DMA2D_BACKGROUND_LAYER) + { + /* Write background CLUT memory address */ + WRITE_REG(hdma2d->Instance->BGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write background CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->BGPFCCR, (DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_BGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_BGPFCCR_CCM_Pos))); + } + /* Configure the CLUT of the foreground DMA2D layer */ + else + { + /* Write foreground CLUT memory address */ + WRITE_REG(hdma2d->Instance->FGCMAR, (uint32_t)CLUTCfg.pCLUT); + + /* Write foreground CLUT size and CLUT color mode */ + MODIFY_REG(hdma2d->Instance->FGPFCCR, (DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM), + ((CLUTCfg.Size << DMA2D_FGPFCCR_CS_Pos) | (CLUTCfg.CLUTColorMode << DMA2D_FGPFCCR_CCM_Pos))); + } + + /* Set the DMA2D state to Ready*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + + +/** + * @brief Configure the line watermark. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @param Line Line Watermark configuration (maximum 16-bit long value expected). + * @note HAL_DMA2D_ProgramLineEvent() API enables the transfer watermark interrupt. + * @note The transfer watermark interrupt is disabled once it has occurred. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line) +{ + /* Check the parameters */ + if (Line > DMA2D_LWR_LW) + { + return HAL_ERROR; + } + else + { + /* Process locked */ + __HAL_LOCK(hdma2d); + + /* Change DMA2D peripheral state */ + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Sets the Line watermark configuration */ + WRITE_REG(hdma2d->Instance->LWR, Line); + + /* Enable the Line interrupt */ + __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TW); + + /* Initialize the DMA2D state*/ + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; + } +} + +/** + * @brief Enable DMA2D dead time feature. + * @param hdma2d DMA2D handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Set DMA2D_AMTCR EN bit */ + SET_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Disable DMA2D dead time feature. + * @param hdma2d DMA2D handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Clear DMA2D_AMTCR EN bit */ + CLEAR_BIT(hdma2d->Instance->AMTCR, DMA2D_AMTCR_EN); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @brief Configure dead time. + * @note The dead time value represents the guaranteed minimum number of cycles between + * two consecutive transactions on the AHB bus. + * @param hdma2d DMA2D handle. + * @param DeadTime dead time value. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime) +{ + /* Process Locked */ + __HAL_LOCK(hdma2d); + + hdma2d->State = HAL_DMA2D_STATE_BUSY; + + /* Set DMA2D_AMTCR DT field */ + MODIFY_REG(hdma2d->Instance->AMTCR, DMA2D_AMTCR_DT, (((uint32_t) DeadTime) << DMA2D_AMTCR_DT_Pos)); + + hdma2d->State = HAL_DMA2D_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma2d); + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to: + (+) Get the DMA2D state + (+) Get the DMA2D error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA2D state + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the DMA2D. + * @retval HAL state + */ +HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(const DMA2D_HandleTypeDef *hdma2d) +{ + return hdma2d->State; +} + +/** + * @brief Return the DMA2D error code + * @param hdma2d pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for DMA2D. + * @retval DMA2D Error Code + */ +uint32_t HAL_DMA2D_GetError(const DMA2D_HandleTypeDef *hdma2d) +{ + return hdma2d->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup DMA2D_Private_Functions DMA2D Private Functions + * @{ + */ + +/** + * @brief Set the DMA2D transfer parameters. + * @param hdma2d Pointer to a DMA2D_HandleTypeDef structure that contains + * the configuration information for the specified DMA2D. + * @param pdata The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param Width The width of data to be transferred from source to destination. + * @param Height The height of data to be transferred from source to destination. + * @retval HAL status + */ +static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, + uint32_t Height) +{ + uint32_t tmp; + uint32_t tmp1; + uint32_t tmp2; + uint32_t tmp3; + uint32_t tmp4; + + /* Configure DMA2D data size */ + MODIFY_REG(hdma2d->Instance->NLR, (DMA2D_NLR_NL | DMA2D_NLR_PL), (Height | (Width << DMA2D_NLR_PL_Pos))); + + /* Configure DMA2D destination address */ + WRITE_REG(hdma2d->Instance->OMAR, DstAddress); + + /* Register to memory DMA2D mode selected */ + if (hdma2d->Init.Mode == DMA2D_R2M) + { + tmp1 = pdata & DMA2D_OCOLR_ALPHA_1; + tmp2 = pdata & DMA2D_OCOLR_RED_1; + tmp3 = pdata & DMA2D_OCOLR_GREEN_1; + tmp4 = pdata & DMA2D_OCOLR_BLUE_1; + + /* Prepare the value to be written to the OCOLR register according to the color mode */ + if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB8888) + { + tmp = (tmp3 | tmp2 | tmp1 | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB888) + { + tmp = (tmp3 | tmp2 | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_RGB565) + { + tmp2 = (tmp2 >> 19U); + tmp3 = (tmp3 >> 10U); + tmp4 = (tmp4 >> 3U); + tmp = ((tmp3 << 5U) | (tmp2 << 11U) | tmp4); + } + else if (hdma2d->Init.ColorMode == DMA2D_OUTPUT_ARGB1555) + { + tmp1 = (tmp1 >> 31U); + tmp2 = (tmp2 >> 19U); + tmp3 = (tmp3 >> 11U); + tmp4 = (tmp4 >> 3U); + tmp = ((tmp3 << 5U) | (tmp2 << 10U) | (tmp1 << 15U) | tmp4); + } + else /* Dhdma2d->Init.ColorMode = DMA2D_OUTPUT_ARGB4444 */ + { + tmp1 = (tmp1 >> 28U); + tmp2 = (tmp2 >> 20U); + tmp3 = (tmp3 >> 12U); + tmp4 = (tmp4 >> 4U); + tmp = ((tmp3 << 4U) | (tmp2 << 8U) | (tmp1 << 12U) | tmp4); + } + /* Write to DMA2D OCOLR register */ + WRITE_REG(hdma2d->Instance->OCOLR, tmp); + } + else if (hdma2d->Init.Mode == DMA2D_M2M_BLEND_FG) /*M2M_blending with fixed color FG DMA2D Mode selected*/ + { + WRITE_REG(hdma2d->Instance->BGMAR, pdata); + } + else /* M2M, M2M_PFC,M2M_Blending or M2M_blending with fixed color BG DMA2D Mode */ + { + /* Configure DMA2D source address */ + WRITE_REG(hdma2d->Instance->FGMAR, pdata); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* DMA2D */ +#endif /* HAL_DMA2D_MODULE_ENABLED */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma_ex.c new file mode 100644 index 000000000..77e2607e0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dma_ex.c @@ -0,0 +1,4661 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following functionalities of the DMA extension + * peripheral: + * + Linked-List Initialization and De-Initialization Functions + * + Linked-List I/O Operation Functions + * + Linked-List Management Functions + * + Data Handling, Repeated Block and Trigger Configuration Functions + * + Suspend and Resume Operation Functions + * + FIFO Status Function + * + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + @verbatim + ====================================================================================================================== + ##### How to use this driver ##### + ====================================================================================================================== + [..] + Alternatively to the normal programming mode, a DMA channel can be programmed by a list of transfers, known as + linked-list (list of Node items). Each node is defined by its data structure. + Each node specifies a standalone DMA channel. + When enabled, the DMA channel fetch the first linked-list node from SRAM (known as head node). When executed, the + next linked list node will be fetched and executed. This operation is repeated until the end of the whole + linked-list queue. Optionally, the linked-list can be linear where the last linked-list queue node is not linked + to another queue node or circular where the last linked-list node is linked to any linked-list queue node. + + (+) Linear linked-list: + The DMA channel fetch and execute all DMA linked-list queue from first node (head node) to last node + (tail node) ones. When the last node is completed, the DMA channel remains in idle state and another + transfer can be lunched. + + (+) Circular linked-list: + The DMA channel fetch and execute all DMA linked-list queue from first node (head node) to last node (tail + node). When last node is executed, the DMA channel fetches the first circular node another time and repeat + the same sequence in an infinite loop (Circular transfer). To stop the DMA channel, an abort operation is + required. This linked-list mode replaces the legacy circular transfers. + + [..] + In order to reduce linked-list queue executing time and power consumption, the DMA channel supports executing the + dynamic linked-list format. In fact, the DMA supports the execution of 2 types of linked-list formats : static and + dynamic. + + (+) Static linked-list: + The static linked-list format refers to the full linked-list node where all DMA channel parameters are + fetched and executed independently of the redundancy of information. + + (+) Dynamic linked-list: + The dynamic linked-list format refer to the customized linked-list node where only DMA channel necessary + parameters are fetched and executed (Example: data size = 20 on previous node, and data size = 20 on the + current node => No need to update it). + + For linked-list transfers, the DMA channel can execute the linked-list queue node by node. This feature is named + link step mode. When activated, enabling the DMA channel first time allows to fetch the head node from memory + then it stops. Then, another DMA channel enable is needed to execute the node. After that, keeping enabling the + DMA channel is needed to execute each node until the end of linked-list queue. When the linked-list queue is + circular, enabling the DMA channel in an infinite loop is required to keep the DMA channel running. This feature + is useful for debug purpose or asynchronously executing queue nodes. + + [..] + Each DMA channel transfer (normal or linked-list), is highly configurable according to DMA channel instance + integrated in devices. These configuration can be : + + (+) Repeated block configuration : + If the feature is supported, the DMA channel can performs a repeated block transfers. Named also 2 + dimension addressing transfers, this feature can transfer n iteration of programmed block transfer (Block + transfer is the legacy data size). Additional to the repeat count of a block, DMA channel addresses can + jump after at burst and block level. The jump length is a programmable parameter defined by DMA user. + (++) Jump at burst level : + The DMA channel keep an empty area, between each 2 consecutive bursts transmitted. + (++) Jump at block level : + The DMA channel keep an empty area, between each 2 consecutive blocks transmitted. + + (+) Trigger : + The DMA channel transfers can be conditioned by hardware signals edges (rising or falling) named hardware + triggers. Trigger condition can be applied at : + (++) Single/Burst level : + Each single/burst data transmission is conditioned by a signal trigger hit. + (++) Block level : + Each block data transmission is conditioned by a signal trigger hit. + (++) Repeated block level : + Each repeated block data transmission is conditioned by a signal trigger hit. + (++) Node level : + Each node execution is conditioned by a signal trigger hit. + The DMA channel can report a trigger overrun when detects more than 2 trigger signal edges before + executing the current transfer. + + (+) Data handling : + The data handling feature is a FIFO capability that can be : + (++) Padding pattern : + Padding selected pattern (zero padding or sign extension) when the source data width is smaller + than the destination data width at single level. + (++) Truncation : + Truncate section from the source data single when the source data width is bigger than the + destination data width. + (++) Pack/Unpack : + Pack a set of data when source data width is smaller than the destination data width. + Unpack a set of data when source data width is bigger than the destination data width. + (++) Exchange : + Exchange data at byte, half-word and word on the destination and at byte level on the source. + + [..] + Each DMA channel transfer (normal or linked-list) when it is active, can be suspended and resumed at run time + application. When trying to suspend an ongoing transfer, the DMA channel isn't suspended instantly but complete + the current ongoing single/burst then it stops. + When the DMA channel is suspended, the current transfer can be resumed instantly. + + [..] + The DMA channel that supports FIFO, can report in real time the number of beats remains on destination (Output) + FIFO level. + + *** Linked-List Initialization and De-Initialization operation *** + ================================================================== + [..] + Differently from normal transfers, DMA channel initialization and de-initialization need less parameters as the + remaining transfer parameters are defined by linked-list nodes. + + (+) Use HAL_DMAEx_List_Init() to initialize a DMA channel in linked-list mode according to programmed fields. + When called, the DMA channel will be ready to execute linked-list queues. + + (+) Use HAL_DMAEx_List_DeInit() to de-initialize a DMA channel in linked-list mode. + When called, the DMA channel will be in reset. It is mandatory to reinitialize it for next transfer. + + *** Linked-List I/O Operation *** + ================================= + [..] + (+) Use HAL_DMAEx_List_Start() to start a DMA transfer in linked-list mode after the configuration of + linked-list queue base address and offset in polling mode (Blocking mode). + + (+) Use HAL_DMAEx_List_Start_IT() to start a DMA transfer in linked-list mode after the configuration of + linked-list queue base address and offset in interrupt mode (Non-blocking mode). + + *** Linked-List Management *** + ============================== + [..] + The linked-list management is a software processing independently of DMA channel hardware. It allows to reset, + build, create, insert, remove, replace, circularize, convert both nodes and queue in order to perform DMA + channel transfers in linked-list mode. + Linked-list APIs and types are adapted to reduce memory footprint. + + *** Linked-list nodes building *** + [..] + At node level, the operations that can be done are building a new linked-list node or get a linked-list node + information from a built node. The linked-list nodes have two forms according to 2 dimensions addressing + capability. The linear addressing nodes contains the information of all DMA channel features except the 2 + dimension addressing features and the 2 dimensions addressing nodes contain the information of all available + features. + + (+) Use HAL_DMAEx_List_BuildNode() to build the DMA linked-list node according to the specified parameters. + Build operation allow to convert the specified parameter in values known by the DMA channel and place them + in memory. + Placing DMA linked-list in SRAM must be done in accordance to product specification to ensure that the + link access port can access to the specified SRAM. + (++) The DMA linked-list node parameter address should be 32bit aligned and should not exceed the 64 KByte + addressable space. + + (+) Use HAL_DMAEx_List_GetNodeConfig() to get the specified configuration parameter on building node. + This API can be used when need to change few parameter to build new node. + + *** Inserting nodes to linked-list queue *** + [..] + In order to build a sequence of DMA transaction with different configuration, we need to insert built node at + linked-list queue (node present an elementary DMA transaction) in linked-list queue on any position to have the + full flexibility of ordering nodes or extend the sequence of queue transactions. + + (+) Use HAL_DMAEx_List_InsertNode() to insert new built node in any queue position of linked-list queue + according to selecting previous node. When calling this API with previous node parameter is NULL, the + inserted node will be placed at the head of the linked-list queue. + (++) This API must be used after HAL_DMAEx_List_BuildNode() otherwise an error will be returned. + (++) This API must be called for static queues format. + (++) This API shall be avoided when adding new node at the head or the tail of queue (overhead of + footprint and performance : use HAL_DMAEx_List_InsertNode_Head() or HAL_DMAEx_List_InsertNode_Tail() + instead). + + (+) Use HAL_DMAEx_List_InsertNode_Head() to insert new built node at the head of linked-list queue. The head + node will not be overwritten but will be the second queue node. + (++) This API must be used after HAL_DMAEx_List_BuildNode() otherwise an error will be returned. + (++) This API must be called for static queues format. + + (+) Use HAL_DMAEx_List_InsertNode_Tail() to insert new built node at the tail of linked-list queue. The tail + node will not be overwritten but will be the penultimate queue node. + (++) This API must be used after HAL_DMAEx_List_BuildNode() otherwise an error will be returned. + (++) This API must be called for static queues format. + + *** Removing nodes from linked-list queue *** + [..] + There is some cases when removing a node from linked-list queue is needed (need to remove an elementary DMA + transaction). Removing node allows to unlink a node from DMA linked-list queue (NOT DELETED), so the removed node + can be reused for another queue or to be added to the same queue without need to rebuild it in next step. + + (+) Use HAL_DMAEx_List_RemoveNode() to remove any yet built and inserted node from linked-list queue according + to selected node. + (++) This API must be called for static queues format. + (++) This API shall be avoided when removing the head or the tail of linked-list queue (overhead of + footprint and performance : use HAL_DMAEx_List_RemoveNode_Head() or HAL_DMAEx_List_RemoveNode_Tail() + instead). + + (+) Use HAL_DMAEx_List_RemoveNode_Head() to remove the head node from linked-list queue. + (++) This API must be called for static queues format. + + (+) Use HAL_DMAEx_List_RemoveNode_Tail() to remove the tail node from linked-list queue. + (++) This API must be called for static queues format. + + *** Replacing nodes on linked-list queue *** + [..] + There is some cases when replacing a node from linked-list queue is needed (need to replace an elementary DMA + transfer, by another one that have not the same configuration). Replacing node allows to unlink the node to be + replaced from DMA linked-list queue (NOT DELETED) and link instead a new node. So the replaced node can be reused + for another queue or to be added to the same queue without need to rebuild it in next step and the new node cannot + be reused except when remove it or replaced in next step. + + (+) Use HAL_DMAEx_List_ReplaceNode() to replace any yet built and inserted node on linked-list queue according + to selected node. + (++) This API must be called for static queues format. + (++) This API shall be avoided when replacing the head or the tail linked-list queue (overhead of + footprint and performance : use HAL_DMAEx_List_ReplaceNode_Head() or + HAL_DMAEx_List_ReplaceNode_Tail() instead). + + (+) Use HAL_DMAEx_List_ReplaceNode_Head() to replace the head node of linked-list queue. + (++) This API must be called for static queues format. + + (+) Use HAL_DMAEx_List_ReplaceNode_Tail() to replace the tail node from linked-list queue. + (++) This API must be called for static queues format. + + *** Reset linked-list queue *** + [..] + After finishing using a linked-list queue, it can be reset and cleared and it's content nodes will be + unlinked (NOT DELETED) and reused on another queue. + + (+) Use HAL_DMAEx_List_ResetQ() to reset a linked-list queue and unlink all it's content nodes. + (++) This API must be called for ready state queues. + (++) This API must be called for static queues format. + + *** Inserting linked-list queue *** + [..] + To ensure the flexibility of building linked-list queue by their targeted functionalities (Example: 3 nodes for + action 1 and 5 nodes for action 2), it is possible to build a queue for action 1 that contains action 1 nodes and + a queue for action 2 that contains action 2 nodes then concatenating the 2 queues. So, there are some cases where + the management of linked-list at queue granularity is needed. + + (+) Use HAL_DMAEx_List_InsertQ() to insert source linked-list queue to a destination linked-list queue + according to selecting previous node. + (++) This API must be called for static queues format. + (++) This API shall be avoided when inserting source linked-list queue at the head or the tail of + destination queue (overhead of footprint and performance : use HAL_DMAEx_List_InsertQ_Head() or + HAL_DMAEx_List_InsertQ_Tail() instead). + + (+) Use HAL_DMAEx_List_InsertQ_Head() to insert a source linked-list queue at the head of linked-list + destination queue. + (++) This API must be called for static queues format. + + (+) Use HAL_DMAEx_List_InsertQ_Tail() to insert a source linked-list queue at the tail of linked-list + destination queue. + (++) This API must be called for static queues format. + + *** Circularizing linked-list queue *** + [..] + In order to perform tasks in infinite loop with DMA channel, it is possible to circularize the linked-list queues. + Circularizing queue allows to link last linked-list queue node to any previous node of the same queue (This node + is named first circular queue). When the first circular node is the head node, all linked-list queue nodes will be + executed in infinite loop. When the first circular node is not the head nodes, all precedent nodes are executed + once and all remaining nodes are executed in an infinite loop. + + (+) Use HAL_DMAEx_List_SetCircularModeConfig() to circularize the linked-list queue according to first + circular node selected. + (++) This API must be called for static queues format. + (++) This API shall be avoided when first circular node is the head linked-list queue node (overhead of + footprint and performance : use HAL_DMAEx_List_SetCircularMode() instead). + + (+) Use HAL_DMAEx_List_SetCircularMode() to circularize the linked-list queue with linking last queue node + with first queue node. + (++) This API must be called for static queues format. + + (+) Use HAL_DMAEx_List_ClearCircularMode() to clear any linked-list queue circular configuration. + (++) This API must be called for static queues format. + + + *** Converting linked-list queue *** + [..] + To have the best DMA channel linked-list queue execution, it is recommended to convert yet build linked-list queue + to dynamic format (Static is the default format). When linked-list queue becomes dynamic, all queue nodes are + optimized and only changed parameters will be updated between nodes. So, the DMA will fetch only changes + parameters instead of the whole node. + + (+) Use HAL_DMAEx_List_ConvertQToDynamic() to convert a linked-list queue to dynamic format. + (++) This API must be called for ready state queues. + (++) This API must be called for static queues format. + (++) This API must be called as the last API before starting the DMA channel in linked-list mode. + + (+) Use HAL_DMAEx_List_ConvertQToStatic() to convert a linked-list queue to static format. + (++) This API must be called for ready state queues. + (++) This API must be called for dynamic queues format. + (++) This API must be called as the first API after the full execution of linked-list queue when the + execution mode is linear (not circular) if it is dynamic and a linked-list queue management is + needed. + (++) This API must be called as the first API after the aborting the execution of the current linked-list + queue when the execution mode is linear (not circular) if it is dynamic and a linked-list queue + management is needed. + + [..] + When converting a circular queue to dynamic format and when the first circular node is the last queue node, it is + recommended to duplicate the last circular node in order to ensure the full optimization when calling + HAL_DMAEx_List_ConvertQToDynamic() API. In this case, updated information are only addresses which allow to reduce + 4 words of update for linear nodes per node execution and 6 words update for 2 dimensions addressing nodes per + node execution. + + + *** Linking linked-list queue to DMA channel *** + [..] + In order to have the possibility of the creation of an infinity queues (limited by available memory size), the + building of linked-list queue is fully independent from DMA channels. It is possible to build all needed queues if + their size is less then available memory at startup time, then linking each time when needed a linked-list queue + to an idle DMA channel. + + (+) Use HAL_DMAEx_List_LinkQ() to link a ready linked-list queue to ready DMA channel. + (++) This API supports the two format of linked-list (Static and dynamic). + (++) This API must be called for ready state queues and DMA channels. + + (+) Use HAL_DMAEx_List_ConvertQToStatic() to unlink a ready linked-list queue to ready DMA channel. + (++) This API supports the two format of linked-list (Static and dynamic). + (++) This API must be called for ready state queues and DMA channels. + + *** User sequence *** + [..] + To use cleanly the DMA linked-list library, ensure to apply the following call sequences : + + (+) Linear transfer : + Linked-list queue building + (++) HAL_DMAEx_List_BuildNode() + (++) HAL_DMAEx_List_InsertNode_Tail() + . + . + . + (++) HAL_DMAEx_List_BuildNode() + (++) HAL_DMAEx_List_InsertNode_Tail() + (++) HAL_DMAEx_List_ConvertQToDynamic() + Linked-list queue execution + (++) HAL_DMAEx_List_Init() + (++) HAL_DMAEx_List_LinkQ() + (++) HAL_DMAEx_List_Start() / HAL_DMAEx_List_Start_IT() + (++) HAL_DMAEx_List_UnLinkQ() + (++) HAL_DMAEx_List_DeInit() + + (+) Circular transfer : + Linked-list queue building + (++) HAL_DMAEx_List_BuildNode() + (++) HAL_DMAEx_List_InsertNode_Tail() + . + . + . + (++) HAL_DMAEx_List_BuildNode() + (++) HAL_DMAEx_List_InsertNode_Tail() + (++) HAL_DMAEx_List_SetCircularModeConfig() / HAL_DMAEx_List_SetCircularMode() + (++) HAL_DMAEx_List_ConvertQToDynamic() + Linked-list queue execution + (++) HAL_DMAEx_List_Init() + (++) HAL_DMAEx_List_LinkQ() + (++) HAL_DMAEx_List_Start() / HAL_DMAEx_List_Start_IT() + (++) HAL_DMA_Abort() / HAL_DMA_Abort_IT() + (++) HAL_DMAEx_List_UnLinkQ() + (++) HAL_DMAEx_List_DeInit() + + + *** Data Handling *** + ===================== + [..] + In order to avoid some CPU data processing in several cases, the DMA channel provides some features related to + FIFO capabilities titled data handling. + (++) Padding pattern + Padding selected pattern (zero padding or sign extension) when the source data width is smaller + than the destination data width at single level. + Zero padding (Source : 0xABAB ------> Destination : 0xABAB0000) + Sign bit extension (Source : 0x0ABA ------> Destination : 0x00000ABA) + (Source : 0xFABA ------> Destination : 0xFFFFFABA) + (++) Truncation : + Truncate section from the source data single when the source data width is bigger than the + destination data width. + Left truncation (Source : 0xABABCDCD ------> Destination : 0xCDCD) + Right truncation (Source : 0xABABCDCD ------> Destination : 0xABAB) + (++) Pack/Unpack : + Pack a set of data when source data width is smaller than the destination data width. + Unpack a set of data when source data width is bigger than the destination data width. + Pack (Source : 0xAB, 0xCD ------> Destination : 0xABCD) + UnPack (Source : 0xABCD ------> Destination : 0xAB, 0xCD) + (++) Exchange : + Exchange data at byte and half-word on the destination and at byte level on the source. + Considering source and destination are both word type. Exchange operation can be as follows. + In examples below, one exchange setting is enabled at a time. + Source byte exchange only (Source : 0xAB12CD34 ------> Destination : 0xABCD1234) + Destination byte exchange only (Source : 0xAB12CD34 ------> Destination : 0x12AB34CD) + Destination half-word exchange only (Source : 0xAB12CD34 ------> Destination : 0xCD34AB12) + In addition, in case of double-word, Exchange data at word level on the destination is also + available. + Considering source and destination are both double-word type. + word exchange only (Source : 0xAB12CD34EF567890 ------> Destination : 0xEF567890AB12CD34) + + (+) Use HAL_DMAEx_ConfigDataHandling() to configure data handling features. Previous elementary explained + can be combined according to application needs. + (++) This API is complementary of normal transfers. + (++) This API must not be called for linked-list transfers as data handling information are configured at + node level. + + *** User sequence *** + [..] + To configure cleanly the DMA channel data handling, ensure to apply the following call sequence : + + (+) Linear transfer : + (++) HAL_DMA_Init() + (++) HAL_DMAEx_ConfigDataHandling() + (++) HAL_DMA_Start() + + *** Repeated Block *** + ====================== + [..] + When available, this feature is used when the data size is higher then 65535 bytes (Maximum block size) or for + scattering / gathering data. + (++) Gather data + Source Destination + 0xAA 0xAA + 0xBB 0xAA + 0xAA ==> 0xAA + 0xCC + 0xAA + (++) Scatter data + Source Destination + 0xAA 0xAA + 0xAA 0xBB + 0xAA ==> 0xAA + 0xBB + 0xAA + + (+) Use HAL_DMAEx_ConfigRepeatBlock() to configure data repeated block feature. Jump addresses and + incrementing or decrementing on source and destination can be combined to have the need application + behavior. + (++) This API is complementary of normal transfers. + (++) This API must not be called for linked-list transfers as repeated block information are configured at + node level. + (++) This API must be called only for DMA channel that supports repeated block feature. + + *** User sequence *** + [..] + To configure cleanly the DMA channel repeated block, ensure to apply the following call sequence : + + (+) Linear transfer : + (++) HAL_DMA_Init() + (++) HAL_DMAEx_ConfigRepeatBlock() + (++) HAL_DMA_Start() + + *** Trigger Configuration *** + ============================= + [..] + When application needs that DMA transfers are conditioned by internal or external events, the trigger feature can + do that. Trigger signals are a set of device signal that are linked to DMA trigger inputs that allows to start the + DMA transfers. + To setup a trigger transfers, three DMA channel parameters are needed: + + (+) Trigger mode + This parameter specifies the trig level. + (++) Block level + (++) Repeated block level + (++) Node level + (++) Single / Burst level + + (+) Trigger polarity + This parameter specifies the DMA trigger sensitivity (Rising or falling). + + (+) Trigger selection + This parameter specifies the DMA trigger hardware signal. + + (+) Use HAL_DMAEx_ConfigTrigger() to configure trigger feature. + (++) This API is complementary to normal transfers APIs. + (++) This API must not be called for linked-list transfers as trigger information are configured at + node level. + + *** User sequence *** + [..] + To configure cleanly the DMA channel trigger, ensure to apply the following call sequence : + (+) Linear transfer : + (++) HAL_DMA_Init() + (++) HAL_DMAEx_ConfigTrigger() + (++) HAL_DMA_Start() + + *** Suspend and resume operation *** + ==================================== + [..] + There are several cases when needs to suspend a DMA current transfer (Example: liberate bandwidth for more + priority DMA channel transfer). Suspending DMA channel (same as abort) is available in polling (blocking mode) and + interrupt (non-blocking mode) modes. When suspended, a DMA channel can be instantly resumed. + + (+) Use HAL_DMAEx_Suspend() to suspend an ongoing DMA channel transfer in polling mode (Blocking mode). + + (+) Use HAL_DMAEx_Suspend_IT() to suspend an ongoing DMA channel transfer in interrupt mode (Non-blocking + mode). + + (+) Use HAL_DMAEx_Resume() to resume a suspended DMA channel transfer execution. + + *** FIFO status *** + =================== + [..] + In several cases, the information of FIFO level is useful to inform at application level how to process remaining + data. When not empty, the DMA channel FIFO cannot be flashed only by reset. + + (+) Use HAL_DMAEx_GetFifoLevel() to get the DMA channel FIFO level (available beats in FIFO). + + @endverbatim + ********************************************************************************************************************** + */ + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -----------------------------------------------------------------------------------------------------*/ +/* Private variables -------------------------------------------------------------------------------------------------*/ +/* Private Constants -------------------------------------------------------------------------------------------------*/ +/* Private macros ----------------------------------------------------------------------------------------------------*/ +/* Private function prototypes ---------------------------------------------------------------------------------------*/ +static void DMA_List_Init(DMA_HandleTypeDef const *const hdma); +static void DMA_List_BuildNode(DMA_NodeConfTypeDef const *const pNodeConfig, + DMA_NodeTypeDef *const pNode); +static void DMA_List_GetNodeConfig(DMA_NodeConfTypeDef *const pNodeConfig, + DMA_NodeTypeDef const *const pNode); +static uint32_t DMA_List_CheckNodesBaseAddresses(DMA_NodeTypeDef const *const pNode1, + DMA_NodeTypeDef const *const pNode2, + DMA_NodeTypeDef const *const pNode3); +static uint32_t DMA_List_CheckNodesTypes(DMA_NodeTypeDef const *const pNode1, + DMA_NodeTypeDef const *const pNode2, + DMA_NodeTypeDef const *const pNode3); +static void DMA_List_GetCLLRNodeInfo(DMA_NodeTypeDef const *const pNode, + uint32_t *const cllr_mask, + uint32_t *const cllr_offset); +static uint32_t DMA_List_FindNode(DMA_QListTypeDef const *const pQList, + DMA_NodeTypeDef const *const pNode, + DMA_NodeInQInfoTypeDef *const NodeInfo); +static void DMA_List_ResetQueueNodes(DMA_QListTypeDef const *const pQList, + DMA_NodeInQInfoTypeDef const *const NodeInfo); +static void DMA_List_FillNode(DMA_NodeTypeDef const *const pSrcNode, + DMA_NodeTypeDef *const pDestNode); +static void DMA_List_ConvertNodeToDynamic(uint32_t ContextNodeAddr, + uint32_t CurrentNodeAddr, + uint32_t RegisterNumber); +static void DMA_List_ConvertNodeToStatic(uint32_t ContextNodeAddr, + uint32_t CurrentNodeAddr, + uint32_t RegisterNumber); +static void DMA_List_UpdateDynamicQueueNodesCLLR(DMA_QListTypeDef const *const pQList, + uint32_t LastNode_IsCircular); +static void DMA_List_UpdateStaticQueueNodesCLLR(DMA_QListTypeDef const *const pQList, + uint32_t operation); +static void DMA_List_FormatNode(DMA_NodeTypeDef *const pNode, + uint32_t RegisterIdx, + uint32_t RegisterNumber, + uint32_t Format); +static void DMA_List_ClearUnusedFields(DMA_NodeTypeDef *const pNode, + uint32_t FirstUnusedField); +static void DMA_List_CleanQueue(DMA_QListTypeDef *const pQList); + +/* Exported functions ------------------------------------------------------------------------------------------------*/ + +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/** @addtogroup DMAEx_Exported_Functions_Group1 + * +@verbatim + ====================================================================================================================== + ##### Linked-List Initialization and De-Initialization Functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the DMA channel in linked-list mode. + [..] + (+) The HAL_DMAEx_List_Init() function follows the DMA channel linked-list mode configuration procedures as + described in reference manual. + (+) The HAL_DMAEx_List_DeInit() function allows to de-initialize the DMA channel in linked-list mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA channel in linked-list mode according to the specified parameters in the + * DMA_InitLinkedListTypeDef and create the associated handle. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_Init(DMA_HandleTypeDef *const hdma) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA channel handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_PRIORITY(hdma->InitLinkedList.Priority)); + assert_param(IS_DMA_LINK_STEP_MODE(hdma->InitLinkedList.LinkStepMode)); + assert_param(IS_DMA_TCEM_LINKEDLIST_EVENT_MODE(hdma->InitLinkedList.TransferEventMode)); + assert_param(IS_DMA_LINKEDLIST_MODE(hdma->InitLinkedList.LinkedListMode)); + /* Check DMA channel instance */ + if ((IS_HPDMA_INSTANCE(hdma->Instance) != 0U) || (IS_GPDMA_INSTANCE(hdma->Instance) != 0U)) + { + assert_param(IS_DMA_LINK_ALLOCATED_PORT(hdma->InitLinkedList.LinkAllocatedPort)); + } + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA channel is effectively disabled */ + while ((hdma->Instance->CCR & DMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Initialize the DMA channel registers */ + DMA_List_Init(hdma); + + /* Update DMA channel operation mode */ + hdma->Mode = hdma->InitLinkedList.LinkedListMode; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA channel when it is configured in linked-list mode. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_DeInit(DMA_HandleTypeDef *const hdma) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channel */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA channel is effectively disabled */ + while ((hdma->Instance->CCR & DMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Reset DMA Channel registers */ + hdma->Instance->CCR = 0U; + hdma->Instance->CLBAR = 0U; + hdma->Instance->CTR1 = 0U; + hdma->Instance->CTR2 = 0U; + hdma->Instance->CBR1 = 0U; + hdma->Instance->CSAR = 0U; + hdma->Instance->CDAR = 0U; + hdma->Instance->CLLR = 0U; + + /* Reset 2D Addressing registers */ + if (IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance) != 0U) + { + hdma->Instance->CTR3 = 0U; + hdma->Instance->CBR2 = 0U; + } + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC | DMA_FLAG_HT | DMA_FLAG_DTE | DMA_FLAG_ULE | DMA_FLAG_USE | DMA_FLAG_SUSP | + DMA_FLAG_TO)); + + /* Clean all callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + hdma->XferSuspendCallback = NULL; + + /* Check the linked-list queue */ + if (hdma->LinkedListQueue != NULL) + { + /* Update the queue state and error code */ + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_READY; + hdma->LinkedListQueue->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Clean DMA queue */ + hdma->LinkedListQueue = NULL; + } + + /* Clean DMA parent */ + if (hdma->Parent != NULL) + { + hdma->Parent = NULL; + } + + /* Update DMA channel operation mode */ + hdma->Mode = DMA_NORMAL; + + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMAEx_Exported_Functions_Group2 + * +@verbatim + ====================================================================================================================== + ##### Linked-List IO Operation Functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Configure to start DMA transfer in linked-list mode. + + [..] + (+) The HAL_DMAEx_List_Start() function allows to start the DMA channel transfer in linked-list mode (Blocking + mode). + (+) The HAL_DMAEx_List_Start_IT() function allows to start the DMA channel transfer in linked-list mode + (Non-blocking mode). + (++) It is mandatory to register a linked-list queue to be executed by a DMA channel before starting + transfer otherwise a HAL_ERROR will be returned. + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA channel transfer in linked-list mode (Blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_Start(DMA_HandleTypeDef *const hdma) +{ + HAL_DMA_StateTypeDef dma_state; + uint32_t ccr_value; + uint32_t cllr_mask; + + /* Check the DMA peripheral handle and the linked-list queue parameters */ + if ((hdma == NULL) || (hdma->LinkedListQueue == NULL)) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + dma_state = hdma->State; + ccr_value = hdma->Instance->CCR & DMA_CCR_LSM; + if ((dma_state == HAL_DMA_STATE_READY) || ((dma_state == HAL_DMA_STATE_BUSY) && (ccr_value != 0U))) + { + /* Check DMA channel state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hdma); + + /* Update the DMA channel and the queue states */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the DMA channel and the queue error codes */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + hdma->LinkedListQueue->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(hdma->LinkedListQueue->Head, &cllr_mask, NULL); + + /* Update DMA registers for linked-list transfer */ + hdma->Instance->CLBAR = ((uint32_t)hdma->LinkedListQueue->Head & DMA_CLBAR_LBA); + hdma->Instance->CLLR = ((uint32_t)hdma->LinkedListQueue->Head & DMA_CLLR_LA) | cllr_mask; + } + + /* Enable DMA channel */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Starts the DMA channel transfer in linked-list mode with interrupts enabled (Non-blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_Start_IT(DMA_HandleTypeDef *const hdma) +{ + HAL_DMA_StateTypeDef dma_state; + uint32_t ccr_value; + uint32_t cllr_mask; + + /* Check the DMA peripheral handle and the linked-list queue parameters */ + if ((hdma == NULL) || (hdma->LinkedListQueue == NULL)) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + dma_state = hdma->State; + ccr_value = hdma->Instance->CCR & DMA_CCR_LSM; + if ((dma_state == HAL_DMA_STATE_READY) || ((dma_state == HAL_DMA_STATE_BUSY) && (ccr_value != 0U))) + { + /* Check DMA channel state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hdma); + + /* Update the DMA channel and the queue states */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->LinkedListQueue->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the DMA channel and the queue error codes */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + hdma->LinkedListQueue->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Enable common interrupts: Transfer Complete and Transfer Errors ITs */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_DTE | DMA_IT_ULE | DMA_IT_USE | DMA_IT_TO)); + + /* Check half transfer complete callback */ + if (hdma->XferHalfCpltCallback != NULL) + { + /* If half transfer complete callback is set, enable the corresponding IT */ + __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT); + } + + /* Check suspend callback */ + if (hdma->XferSuspendCallback != NULL) + { + /* If transfer suspend callback is set, enable the corresponding IT */ + __HAL_DMA_ENABLE_IT(hdma, DMA_IT_SUSP); + } + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(hdma->LinkedListQueue->Head, &cllr_mask, NULL); + + /* Update DMA registers for linked-list transfer */ + hdma->Instance->CLBAR = ((uint32_t)hdma->LinkedListQueue->Head & DMA_CLBAR_LBA); + hdma->Instance->CLLR = ((uint32_t)hdma->LinkedListQueue->Head & DMA_CLLR_LA) | cllr_mask; + } + + /* Enable DMA channel */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Change the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMAEx_Exported_Functions_Group3 + * +@verbatim + ====================================================================================================================== + ##### Linked-List Management Functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Build linked-list node. + (+) Get linked-list node configuration. + (+) Insert node to linked-list queue in any queue position. + (+) Remove any node from linked-list queue. + (+) Replace any node from linked-list queue. + (+) Reset linked-list queue. + (+) Insert linked-list queue in any queue position. + (+) Set circular mode configuration to linked-list queue. + (+) Clear circular mode configuration from linked-list queue. + (+) Convert static linked-list queue to dynamic format. + (+) Convert dynamic linked-list queue to static format. + (+) Link linked-list queue to DMA channel. + (+) Unlink linked-list queue from DMA channel. + + [..] + (+) The HAL_DMAEx_List_BuildNode() function allows to build linked-list node. + Node type can be : + (++) 2 dimensions addressing node. + (++) Linear addressing node. + + (+) The HAL_DMAEx_List_GetNodeConfig() function allows to get the linked-list node configuration from built node. + + (+) The HAL_DMAEx_List_InsertNode() function allows to insert built linked-list node to static linked-list queue + according to selected position. + + (+) The HAL_DMAEx_List_InsertNode_Head() and HAL_DMAEx_List_InsertNode_Tail() functions allow to insert built + linked-list node to the head (respectively the tail) of static linked-list queue. + + (+) The HAL_DMAEx_List_RemoveNode() function allows to remove selected built linked-list node from static + linked-list queue. + + (+) The HAL_DMAEx_List_RemoveNode_Head() and HAL_DMAEx_List_RemoveNode_Tail() functions allow to remove the head + (respectively the tail) built linked-list node from static linked-list queue. + + (+) The HAL_DMAEx_List_ReplaceNode() function allows to replace selected built linked-list node from static + linked-list queue. + + (+) The HAL_DMAEx_List_ReplaceNode_Head() and HAL_DMAEx_List_ReplaceNode_Tail() functions allow to replace the + head (respectively the tail) built linked-list node of static linked-list queue. + + (+) The HAL_DMAEx_List_ResetQ() function allows to reset static linked-list queue and unlink all built linked-list + nodes. + + (+) The HAL_DMAEx_List_InsertQ() function allows to insert static linked-list source queue to static linked-list + destination queue according to selected position. + + (+) The HAL_DMAEx_List_InsertQ_Head() and HAL_DMAEx_List_InsertQ_Tail() functions allow to insert static + linked-list source queue to the head (respectively the tail) of static linked-list destination queue. + + (+) The HAL_DMAEx_List_SetCircularModeConfig() function allows to link the last static linked-list queue node to + the selected first circular node. + + (+) The HAL_DMAEx_List_SetCircularMode() function allows to link the last static linked-list queue node to the + first static linked-list queue node. + + (+) The HAL_DMAEx_List_ClearCircularMode() function allows to unlink the last static linked-list queue node from + any first circular node position. + + (+) The HAL_DMAEx_List_ConvertQToDynamic() function allows to convert the static linked-list queue to dynamic + format. (Optimized queue execution) + + (+) The HAL_DMAEx_List_ConvertQToStatic() function allows to convert the dynamic linked-list queue to static + format. (Not optimized queue execution) + + (+) The HAL_DMAEx_List_LinkQ() function allows to link the (Dynamic / Static) linked-list queue to DMA channel to + be executed. + + (+) The HAL_DMAEx_List_UnLinkQ() function allows to unlink the (Dynamic / Static) linked-list queue from DMA + channel when execution is completed. + +@endverbatim + * @{ + */ + +/** + * @brief Build a DMA channel node according to the specified parameters in the DMA_NodeConfTypeDef. + * @param pNodeConfig : Pointer to a DMA_NodeConfTypeDef structure that contains the configuration information for the + * specified DMA linked-list Node. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @note The DMA linked-list node parameter address should be 32bit aligned and should not exceed the 64 KByte + * addressable space. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_BuildNode(DMA_NodeConfTypeDef const *const pNodeConfig, + DMA_NodeTypeDef *const pNode) +{ + /* Check the node configuration and physical node parameters */ + if ((pNodeConfig == NULL) || (pNode == NULL)) + { + return HAL_ERROR; + } + + /* Check node type parameter */ + assert_param(IS_DMA_NODE_TYPE(pNodeConfig->NodeType)); + + /* Check DMA channel basic transfer parameters */ + assert_param(IS_DMA_SOURCE_INC(pNodeConfig->Init.SrcInc)); + assert_param(IS_DMA_DESTINATION_INC(pNodeConfig->Init.DestInc)); + assert_param(IS_DMA_SOURCE_DATA_WIDTH(pNodeConfig->Init.SrcDataWidth)); + assert_param(IS_DMA_DESTINATION_DATA_WIDTH(pNodeConfig->Init.DestDataWidth)); + assert_param(IS_DMA_DATA_ALIGNMENT(pNodeConfig->DataHandlingConfig.DataAlignment)); + assert_param(IS_DMA_REQUEST(pNodeConfig->Init.Request)); + assert_param(IS_DMA_DIRECTION(pNodeConfig->Init.Direction)); + assert_param(IS_DMA_TCEM_EVENT_MODE(pNodeConfig->Init.TransferEventMode)); + assert_param(IS_DMA_BLOCK_HW_REQUEST(pNodeConfig->Init.BlkHWRequest)); + assert_param(IS_DMA_MODE(pNodeConfig->Init.Mode)); + + /* Check DMA channel parameters */ + if ((pNodeConfig->NodeType & (DMA_CHANNEL_TYPE_GPDMA | DMA_CHANNEL_TYPE_HPDMA)) != 0U) + { + assert_param(IS_DMA_BURST_LENGTH(pNodeConfig->Init.SrcBurstLength)); + assert_param(IS_DMA_BURST_LENGTH(pNodeConfig->Init.DestBurstLength)); + assert_param(IS_DMA_DATA_EXCHANGE(pNodeConfig->DataHandlingConfig.DataExchange)); + assert_param(IS_DMA_TRANSFER_ALLOCATED_PORT(pNodeConfig->Init.TransferAllocatedPort)); + } + + /* Check DMA channel trigger parameters */ + assert_param(IS_DMA_TRIGGER_POLARITY(pNodeConfig->TriggerConfig.TriggerPolarity)); + if (pNodeConfig->TriggerConfig.TriggerPolarity != DMA_TRIG_POLARITY_MASKED) + { + assert_param(IS_DMA_TRIGGER_MODE(pNodeConfig->TriggerConfig.TriggerMode)); + assert_param(IS_DMA_TRIGGER_SELECTION(pNodeConfig->TriggerConfig.TriggerSelection)); + } + + /* Check DMA channel repeated block parameters */ + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + assert_param(IS_DMA_REPEAT_COUNT(pNodeConfig->RepeatBlockConfig.RepeatCount)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.SrcAddrOffset)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.DestAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.SrcAddrOffset)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.DestAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset)); + } + + /* Build the DMA channel node */ + DMA_List_BuildNode(pNodeConfig, pNode); + + return HAL_OK; +} + +/** + * @brief Get a DMA channel node configuration. + * @param pNodeConfig : Pointer to a DMA_NodeConfTypeDef structure that contains the configuration information for the + * specified DMA linked-list Node. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_GetNodeConfig(DMA_NodeConfTypeDef *const pNodeConfig, + DMA_NodeTypeDef const *const pNode) +{ + /* Check the node configuration and physical node parameters */ + if ((pNodeConfig == NULL) || (pNode == NULL)) + { + return HAL_ERROR; + } + + /* Get the DMA channel node configuration */ + DMA_List_GetNodeConfig(pNodeConfig, pNode); + + return HAL_OK; +} + +/** + * @brief Insert new node in any queue position of linked-list queue according to selecting previous node. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pPrevNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list previous node registers + * configurations. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pPrevNode, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the new node parameters */ + if ((pQList == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pQList->Head, pPrevNode, pNewNode) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pQList->Head, pPrevNode, pNewNode) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + /* Empty queue */ + if (pQList->Head == NULL) + { + /* Add only new node to queue */ + if (pPrevNode == NULL) + { + pQList->Head = pNewNode; + pQList->NodeNumber = 1U; + } + /* Add previous node then new node to queue */ + else + { + pQList->Head = pPrevNode; + pPrevNode->LinkRegisters[cllr_offset] = ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + pQList->NodeNumber = 2U; + } + } + /* Not empty queue */ + else + { + /* Add new node at the head of queue */ + if (pPrevNode == NULL) + { + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->Head & DMA_CLLR_LA) | cllr_mask; + pQList->Head = pNewNode; + } + /* Add new node according to selected position */ + else + { + /* Find node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + if (DMA_List_FindNode(pQList, pPrevNode, &node_info) == 0U) + { + /* Selected node is the last queue node */ + if (node_info.currentnode_pos == pQList->NodeNumber) + { + /* Check if queue is circular */ + if (pQList->FirstCircularNode != NULL) + { + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->FirstCircularNode & DMA_CLLR_LA) | cllr_mask; + } + + pPrevNode->LinkRegisters[cllr_offset] = ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + } + /* Selected node is not the last queue node */ + else + { + pNewNode->LinkRegisters[cllr_offset] = pPrevNode->LinkRegisters[cllr_offset]; + pPrevNode->LinkRegisters[cllr_offset] = ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + } + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NOTFOUND; + + return HAL_ERROR; + } + } + + /* Increment queue node number */ + pQList->NodeNumber++; + } + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Insert new node at the head of linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode_Head(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + + /* Check the queue and the new node parameters */ + if ((pQList == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Empty queue */ + if (pQList->Head == NULL) + { + pQList->Head = pNewNode; + } + /* Not empty queue */ + else + { + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->Head & DMA_CLLR_LA) | cllr_mask; + pQList->Head = pNewNode; + } + + /* Increment queue node number */ + pQList->NodeNumber++; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Insert new node at the tail of linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertNode_Tail(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the new node parameters */ + if ((pQList == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Empty queue */ + if (pQList->Head == NULL) + { + pQList->Head = pNewNode; + } + /* Not empty queue */ + else + { + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + /* Find node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Check if queue is circular */ + if (pQList->FirstCircularNode != NULL) + { + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->FirstCircularNode & DMA_CLLR_LA) | cllr_mask; + } + + ((DMA_NodeTypeDef *)node_info.currentnode_addr)->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + } + + /* Increment queue node number */ + pQList->NodeNumber++; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Remove node from any linked-list queue position. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list previous node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNode) +{ + uint32_t previousnode_addr; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the node parameters */ + if ((pQList == NULL) || (pNode == NULL)) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNode, NULL, &cllr_offset); + + /* Find node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + if (DMA_List_FindNode(pQList, pNode, &node_info) == 0U) + { + /* Removed node is the head node */ + if (node_info.currentnode_pos == 1U) + { + /* Check if first circular node queue is the first node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)node_info.currentnode_addr)) + { + /* Find last queue node */ + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear last node link */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear first circular node */ + pQList->FirstCircularNode = NULL; + } + + /* Update the queue head node */ + pQList->Head = (DMA_NodeTypeDef *)(((uint32_t)pQList->Head & DMA_CLBAR_LBA) + + (pNode->LinkRegisters[cllr_offset] & DMA_CLLR_LA)); + /* Unlink node to be removed */ + pNode->LinkRegisters[cllr_offset] = 0U; + } + /* Removed node is the last node */ + else if (node_info.currentnode_pos == pQList->NodeNumber) + { + /* Clear CLLR for previous node */ + ((DMA_NodeTypeDef *)(node_info.previousnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear CLLR for last node */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear first circular node */ + pQList->FirstCircularNode = NULL; + } + /* Removed node is in the middle */ + else + { + /* Store previous node address to be updated later */ + previousnode_addr = node_info.previousnode_addr; + + /* Check if first circular node queue is the current node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)node_info.currentnode_addr)) + { + /* Find last queue node */ + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear last node link */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear first circular node */ + pQList->FirstCircularNode = NULL; + } + + /* Link previous node */ + ((DMA_NodeTypeDef *)(previousnode_addr))->LinkRegisters[cllr_offset] = pNode->LinkRegisters[cllr_offset]; + + /* Unlink node to be removed */ + pNode->LinkRegisters[cllr_offset] = 0U; + } + + /* Decrement node number */ + pQList->NodeNumber--; + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NOTFOUND; + + return HAL_ERROR; + } + + /* Check if queue is empty */ + if (pQList->NodeNumber == 0U) + { + /* Clean empty queue parameter */ + DMA_List_CleanQueue(pQList); + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Remove the head node from linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode_Head(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + uint32_t current_addr; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Queue contains only one node */ + if (pQList->NodeNumber == 1U) + { + pQList->Head->LinkRegisters[cllr_offset] = 0U; + pQList->FirstCircularNode = 0U; + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + } + /* Queue contains more then one node */ + else + { + /* Check if first circular node queue is the first node */ + if (pQList->FirstCircularNode == pQList->Head) + { + /* Find last queue node */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear last node link */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear first circular node */ + pQList->FirstCircularNode = NULL; + } + + current_addr = pQList->Head->LinkRegisters[cllr_offset] & DMA_CLLR_LA; + pQList->Head->LinkRegisters[cllr_offset] = 0U; + pQList->Head = ((DMA_NodeTypeDef *)(current_addr + ((uint32_t)pQList->Head & DMA_CLBAR_LBA))); + } + + /* Decrement node number */ + pQList->NodeNumber--; + + /* Check if queue is empty */ + if (pQList->NodeNumber == 0U) + { + /* Clean empty queue parameter */ + DMA_List_CleanQueue(pQList); + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Remove the tail node from linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_RemoveNode_Tail(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Queue contains only one node */ + if (pQList->NodeNumber == 1U) + { + pQList->Head->LinkRegisters[cllr_offset] = 0U; + pQList->FirstCircularNode = 0U; + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + } + /* Queue contains more then one node */ + else + { + /* Find node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear CLLR for previous node */ + ((DMA_NodeTypeDef *)(node_info.previousnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear CLLR for last node */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Clear first circular node */ + pQList->FirstCircularNode = NULL; + } + + /* Decrement node number */ + pQList->NodeNumber--; + + /* Check if queue is empty */ + if (pQList->NodeNumber == 0U) + { + /* Clean empty queue parameter */ + DMA_List_CleanQueue(pQList); + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + } + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Replace node in linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pOldNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list old node registers + * configurations. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pOldNode, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the nodes parameters */ + if ((pQList == NULL) || (pOldNode == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pQList->Head, pOldNode, pNewNode) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pQList->Head, pOldNode, pNewNode) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + /* Find node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + if (DMA_List_FindNode(pQList, pOldNode, &node_info) == 0U) + { + /* Replaced node is the head node */ + if (node_info.currentnode_pos == 1U) + { + pNewNode->LinkRegisters[cllr_offset] = + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset]; + pQList->Head = pNewNode; + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Check if first circular node queue is the first node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)node_info.currentnode_addr)) + { + /* Find last queue node */ + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear last node link */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Set new node as first circular node */ + pQList->FirstCircularNode = pNewNode; + } + } + /* Replaced node is the last */ + else if (node_info.currentnode_pos == pQList->NodeNumber) + { + ((DMA_NodeTypeDef *)(node_info.previousnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Check if first circular node queue is the last node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)(node_info.currentnode_addr))) + { + /* Link first circular node to new node */ + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Set new node as first circular node */ + pQList->FirstCircularNode = pNewNode; + } + /* Check if first circular node queue is not the last node */ + else if (pQList->FirstCircularNode != NULL) + { + /* Link first circular node to new node */ + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->FirstCircularNode & DMA_CLLR_LA) | cllr_mask; + } + else + { + /* Prevent MISRA-C2012-Rule-15.7 */ + } + } + /* Replaced node is in the middle */ + else + { + ((DMA_NodeTypeDef *)(node_info.previousnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + pNewNode->LinkRegisters[cllr_offset] = + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset]; + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Check if first circular node queue is the current node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)(node_info.currentnode_addr))) + { + /* Find last node and get its position in selected queue */ + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Link last queue node to new node */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Set new node as first circular node */ + pQList->FirstCircularNode = pNewNode; + } + } + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NOTFOUND; + + return HAL_ERROR; + } + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Replace the head node of linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode_Head(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_offset; + uint32_t cllr_mask; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the new node parameters */ + if ((pQList == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pQList->Head, pNewNode, NULL) != 0U) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + /* Check if first circular node queue is the first node */ + if (pQList->FirstCircularNode == pQList->Head) + { + /* Find last queue node */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear last node link */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Set new node as first circular node */ + pQList->FirstCircularNode = pNewNode; + } + + /* Replace head node */ + pNewNode->LinkRegisters[cllr_offset] = pQList->Head->LinkRegisters[cllr_offset]; + pQList->Head->LinkRegisters[cllr_offset] = 0U; + pQList->Head = pNewNode; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Replace the tail node of linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNewNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list new node registers + * configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ReplaceNode_Tail(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pNewNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the new node parameters */ + if ((pQList == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pNewNode, &cllr_mask, &cllr_offset); + + /* Find last node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Link previous node to new node */ + ((DMA_NodeTypeDef *)(node_info.previousnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Clear CLLR for current node */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Check if first circular node queue is the last node */ + if (pQList->FirstCircularNode == ((DMA_NodeTypeDef *)(node_info.currentnode_addr))) + { + /* Link first circular node to new node */ + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pNewNode & DMA_CLLR_LA) | cllr_mask; + + /* Set new node as first circular node */ + pQList->FirstCircularNode = pNewNode; + } + /* Check if first circular node queue is not the last node */ + else if (pQList->FirstCircularNode != NULL) + { + /* Link first circular node to new node */ + pNewNode->LinkRegisters[cllr_offset] = ((uint32_t)pQList->FirstCircularNode & DMA_CLLR_LA) | cllr_mask; + } + else + { + /* Prevent MISRA-C2012-Rule-15.7 */ + } + + /* Check if queue contains one node */ + if (pQList->NodeNumber == 1U) + { + pQList->Head = pNewNode; + } + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Reset the linked-list queue and unlink queue nodes. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ResetQ(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check queue state */ + if (pQList->State == HAL_DMA_QUEUE_STATE_BUSY) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_BUSY; + + return HAL_ERROR; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Check the queue */ + if (pQList->Head != NULL) + { + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Reset selected queue nodes */ + node_info.cllr_offset = cllr_offset; + DMA_List_ResetQueueNodes(pQList, &node_info); + } + + /* Reset head node address */ + pQList->Head = NULL; + + /* Reset node number */ + pQList->NodeNumber = 0U; + + /* Reset first circular node */ + pQList->FirstCircularNode = NULL; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Insert a source linked-list queue to a destination linked-list queue according to selecting previous node. + * @param pSrcQList : Pointer to a DMA_QListTypeDef structure that contains source queue information. + * @param pPrevNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list previous node registers + * configurations. + * @param pDestQList : Pointer to a DMA_QListTypeDef structure that contains destination queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ(DMA_QListTypeDef *const pSrcQList, + DMA_NodeTypeDef const *const pPrevNode, + DMA_QListTypeDef *const pDestQList) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef src_q_node_info; + DMA_NodeInQInfoTypeDef dest_q_node_info; + + /* Check the source and destination queues and the previous node parameters */ + if ((pSrcQList == NULL) || (pDestQList == NULL)) + { + return HAL_ERROR; + } + + /* Check the source queue */ + if (pSrcQList->Head == NULL) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check the source queue type */ + if (pSrcQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check the destination queue type */ + if (pDestQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check the source queue circularity */ + if (pSrcQList->FirstCircularNode != NULL) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pSrcQList->Head, pPrevNode, pDestQList->Head) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pSrcQList->Head, pPrevNode, pDestQList->Head) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the source queue state */ + pSrcQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pSrcQList->Head, &cllr_mask, &cllr_offset); + + /* Empty destination queue */ + if (pDestQList->Head == NULL) + { + pDestQList->Head = pSrcQList->Head; + pDestQList->NodeNumber = pSrcQList->NodeNumber; + } + /* Not empty destination queue */ + else + { + /* Previous node is empty */ + if (pPrevNode == NULL) + { + /* Find node and get its position in selected queue */ + src_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pSrcQList, NULL, &src_q_node_info); + + /* Check if first circular node queue is the first node */ + if (pDestQList->FirstCircularNode == pDestQList->Head) + { + /* Find node and get its position in selected queue */ + dest_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pDestQList, NULL, &dest_q_node_info); + + /* Link destination queue tail node to new first circular node */ + ((DMA_NodeTypeDef *)dest_q_node_info.currentnode_addr)->LinkRegisters[cllr_offset] = + ((uint32_t)pSrcQList->Head & DMA_CLLR_LA) | cllr_mask; + + /* Set the head node of source queue as the first circular node */ + pDestQList->FirstCircularNode = pSrcQList->Head; + } + + /* Link the last node of source queue to the fist node of destination queue */ + ((DMA_NodeTypeDef *)(src_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pDestQList->Head & DMA_CLLR_LA) | cllr_mask; + pDestQList->Head = pSrcQList->Head; + pDestQList->NodeNumber += pSrcQList->NodeNumber; + } + /* Previous node is not empty */ + else + { + /* Find node and get its position in selected queue */ + dest_q_node_info.cllr_offset = cllr_offset; + if (DMA_List_FindNode(pDestQList, pPrevNode, &dest_q_node_info) == 0U) + { + /* Selected node is the last destination queue node */ + if (dest_q_node_info.currentnode_pos == pDestQList->NodeNumber) + { + /* Link the first node of source queue to the last node of destination queue */ + ((DMA_NodeTypeDef *)(dest_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pSrcQList->Head & DMA_CLLR_LA) | cllr_mask; + pDestQList->NodeNumber += pSrcQList->NodeNumber; + + /* Check if first circular node queue is not empty */ + if (pDestQList->FirstCircularNode != NULL) + { + /* Find node and get its position in selected queue */ + src_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pSrcQList, NULL, &src_q_node_info); + + /* Find first circular node */ + (void)DMA_List_FindNode(pDestQList, pDestQList->FirstCircularNode, &dest_q_node_info); + + /* Link last source queue node to first destination queue */ + ((DMA_NodeTypeDef *)src_q_node_info.currentnode_addr)->LinkRegisters[cllr_offset] = + (dest_q_node_info.currentnode_addr & DMA_CLLR_LA) | cllr_mask; + } + } + /* Selected node is not the last destination queue node */ + else + { + /* Link the first node of source queue to the previous node of destination queue */ + ((DMA_NodeTypeDef *)(dest_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pSrcQList->Head & DMA_CLLR_LA) | cllr_mask; + + /* Find node and get its position in selected queue */ + src_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pSrcQList, NULL, &src_q_node_info); + + /* Link the last node of source queue to the next node of destination queue */ + ((DMA_NodeTypeDef *)(src_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + (dest_q_node_info.nextnode_addr & DMA_CLLR_LA) | cllr_mask; + + /* Update queues counter */ + pDestQList->NodeNumber += pSrcQList->NodeNumber; + } + } + else + { + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NOTFOUND; + + return HAL_ERROR; + } + } + } + + /* Clean the source queue variable as it is obsolete */ + DMA_List_CleanQueue(pSrcQList); + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(src_q_node_info); + UNUSED(dest_q_node_info); + + return HAL_OK; +} + +/** + * @brief Insert a source linked-list queue at the head of destination queue. + * @param pSrcQList : Pointer to a DMA_QListTypeDef structure that contains source queue information. + * @param pDestQList : Pointer to a DMA_QListTypeDef structure that contains destination queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ_Head(DMA_QListTypeDef *const pSrcQList, + DMA_QListTypeDef *const pDestQList) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef src_q_node_info; + DMA_NodeInQInfoTypeDef dest_q_node_info; + + /* Check the source and destination queues and the previous node parameters */ + if ((pSrcQList == NULL) || (pDestQList == NULL)) + { + return HAL_ERROR; + } + + /* Check the source queue */ + if (pSrcQList->Head == NULL) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check the source queue type */ + if (pSrcQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check the destination queue type */ + if (pDestQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pSrcQList->Head, pDestQList->Head, NULL) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pSrcQList->Head, pDestQList->Head, NULL) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the source queue state */ + pSrcQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pSrcQList->Head, &cllr_mask, &cllr_offset); + + /* Empty destination queue */ + if (pDestQList->Head == NULL) + { + pDestQList->Head = pSrcQList->Head; + pDestQList->NodeNumber = pSrcQList->NodeNumber; + } + /* Not empty destination queue */ + else + { + /* Find node and get its position in selected queue */ + src_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pSrcQList, NULL, &src_q_node_info); + + /* Check if first circular node queue is the first node */ + if (pDestQList->FirstCircularNode == pDestQList->Head) + { + /* Find node and get its position in selected queue */ + dest_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pDestQList, NULL, &dest_q_node_info); + + /* Link destination queue tail node to new first circular node */ + ((DMA_NodeTypeDef *)dest_q_node_info.currentnode_addr)->LinkRegisters[cllr_offset] = + ((uint32_t)pSrcQList->Head & DMA_CLLR_LA) | cllr_mask; + + /* Set the head node of source queue as the first circular node */ + pDestQList->FirstCircularNode = pSrcQList->Head; + } + + /* Link the last node of source queue to the fist node of destination queue */ + ((DMA_NodeTypeDef *)(src_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pDestQList->Head & DMA_CLLR_LA) | cllr_mask; + pDestQList->Head = pSrcQList->Head; + pDestQList->NodeNumber += pSrcQList->NodeNumber; + } + + /* Clean the source queue variable as it is obsolete */ + DMA_List_CleanQueue(pSrcQList); + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(src_q_node_info); + UNUSED(dest_q_node_info); + + return HAL_OK; +} + +/** + * @brief Insert a source linked-list queue at the tail of destination queue. + * @param pSrcQList : Pointer to a DMA_QListTypeDef structure that contains source queue information. + * @param pDestQList : Pointer to a DMA_QListTypeDef structure that contains destination queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_InsertQ_Tail(DMA_QListTypeDef *const pSrcQList, + DMA_QListTypeDef *const pDestQList) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef src_q_node_info; + DMA_NodeInQInfoTypeDef dest_q_node_info; + + /* Check the source and destination queues and the previous node parameters */ + if ((pSrcQList == NULL) || (pDestQList == NULL)) + { + return HAL_ERROR; + } + + /* Check the source queue */ + if (pSrcQList->Head == NULL) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check the source queue type */ + if (pSrcQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check the destination queue type */ + if (pDestQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Check nodes base addresses */ + if (DMA_List_CheckNodesBaseAddresses(pSrcQList->Head, pDestQList->Head, NULL) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_OUTOFRANGE; + + return HAL_ERROR; + } + + /* Check nodes types compatibility */ + if (DMA_List_CheckNodesTypes(pSrcQList->Head, pDestQList->Head, NULL) != 0U) + { + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the source queue state */ + pSrcQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the source queue error code */ + pSrcQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pSrcQList->Head, &cllr_mask, &cllr_offset); + + /* Empty destination queue */ + if (pDestQList->Head == NULL) + { + pDestQList->Head = pSrcQList->Head; + pDestQList->NodeNumber = pSrcQList->NodeNumber; + } + /* Not empty destination queue */ + else + { + /* Find node and get its position in selected queue */ + dest_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pDestQList, NULL, &dest_q_node_info); + + /* Update source queue last node CLLR to link it with destination first node */ + ((DMA_NodeTypeDef *)(dest_q_node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pSrcQList->Head & DMA_CLLR_LA) | cllr_mask; + pDestQList->NodeNumber += pSrcQList->NodeNumber; + + /* Check if first circular node queue is not empty */ + if (pDestQList->FirstCircularNode != NULL) + { + /* Find node and get its position in selected queue */ + src_q_node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pSrcQList, NULL, &src_q_node_info); + + /* Find first circular node */ + (void)DMA_List_FindNode(pDestQList, pDestQList->FirstCircularNode, &dest_q_node_info); + + /* Link last source queue node to first destination queue */ + ((DMA_NodeTypeDef *)src_q_node_info.currentnode_addr)->LinkRegisters[cllr_offset] = + (dest_q_node_info.currentnode_addr & DMA_CLLR_LA) | cllr_mask; + } + } + + /* Clean the source queue variable as it is obsolete */ + DMA_List_CleanQueue(pSrcQList); + + /* Update the destination queue error code */ + pDestQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the destination queue state */ + pDestQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(src_q_node_info); + + return HAL_OK; +} + +/** + * @brief Set circular mode configuration for linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pFirstCircularNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list first circular node + * registers configurations. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_SetCircularModeConfig(DMA_QListTypeDef *const pQList, + DMA_NodeTypeDef *const pFirstCircularNode) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue and the first circular node parameters */ + if ((pQList == NULL) || (pFirstCircularNode == NULL)) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue circular mode */ + if (pQList->FirstCircularNode != NULL) + { + if (pQList->FirstCircularNode == pFirstCircularNode) + { + return HAL_OK; + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pFirstCircularNode, &cllr_mask, &cllr_offset); + + /* Find the first circular node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + if (DMA_List_FindNode(pQList, pFirstCircularNode, &node_info) == 0U) + { + /* Find the last queue node and get its position in selected queue */ + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Set circular mode */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pFirstCircularNode & DMA_CLLR_LA) | cllr_mask; + + /* Update first circular node in queue */ + pQList->FirstCircularNode = pFirstCircularNode; + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NOTFOUND; + + return HAL_ERROR; + } + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Set circular mode for linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_SetCircularMode(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_mask; + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue circular mode */ + if (pQList->FirstCircularNode != NULL) + { + if (pQList->FirstCircularNode == pQList->Head) + { + return HAL_OK; + } + else + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, &cllr_mask, &cllr_offset); + + /* Find the last queue node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Set circular mode */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = + ((uint32_t)pQList->Head & DMA_CLLR_LA) | cllr_mask; + + /* Update linked-list circular state */ + pQList->FirstCircularNode = pQList->Head; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Clear circular mode for linked-list queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ClearCircularMode(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check queue circular mode */ + if (pQList->FirstCircularNode == NULL) + { + return HAL_OK; + } + + /* Check queue type */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Find the last queue node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + + /* Clear circular mode */ + ((DMA_NodeTypeDef *)(node_info.currentnode_addr))->LinkRegisters[cllr_offset] = 0U; + + /* Update linked-list circular configuration */ + pQList->FirstCircularNode = NULL; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + /* Prevent MISRA-C2012-Rule-2.2_b */ + UNUSED(node_info); + + return HAL_OK; +} + +/** + * @brief Convert a linked-list queue to dynamic (Optimized DMA queue execution). + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ConvertQToDynamic(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + uint32_t currentnode_addr; + DMA_NodeTypeDef context_node; + DMA_NodeInQInfoTypeDef node_info; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check if queue is dynamic */ + if (pQList->Type == QUEUE_TYPE_DYNAMIC) + { + return HAL_OK; + } + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Check queue circularity */ + if (pQList->FirstCircularNode != 0U) + { + /* Find the last queue node and get its position in selected queue */ + node_info.cllr_offset = cllr_offset; + (void)DMA_List_FindNode(pQList, NULL, &node_info); + } + + /* Set current node address */ + currentnode_addr = (uint32_t)pQList->Head; + + /* Store register value */ + DMA_List_FillNode(pQList->Head, &context_node); + + /* Convert all nodes to dyncamic (Bypass head node) */ + for (uint32_t node_count = 1U; node_count < pQList->NodeNumber; node_count++) + { + /* Update node address */ + MODIFY_REG(currentnode_addr, DMA_CLLR_LA, (context_node.LinkRegisters[cllr_offset] & DMA_CLLR_LA)); + + /* Bypass the first circular node when first circular node isn't the last queue node */ + if (((uint32_t)pQList->FirstCircularNode != 0U) && + ((uint32_t)pQList->FirstCircularNode != node_info.currentnode_addr) && + ((uint32_t)pQList->FirstCircularNode == currentnode_addr)) + { + /* Copy first circular node to context node */ + DMA_List_FillNode(pQList->FirstCircularNode, &context_node); + } + else + { + /* Convert current node to dynamic */ + DMA_List_ConvertNodeToDynamic((uint32_t)&context_node, currentnode_addr, (cllr_offset + 1U)); + } + } + + /* Check if first circular node is the last node queue */ + if (((uint32_t)pQList->FirstCircularNode != 0U) && + ((uint32_t)pQList->FirstCircularNode != node_info.currentnode_addr)) + { + /* Update all queue nodes CLLR */ + DMA_List_UpdateDynamicQueueNodesCLLR(pQList, LASTNODE_ISNOT_CIRCULAR); + } + else + { + /* Update all queue nodes CLLR */ + DMA_List_UpdateDynamicQueueNodesCLLR(pQList, LASTNODE_IS_CIRCULAR); + } + + /* Set queue type */ + pQList->Type = QUEUE_TYPE_DYNAMIC; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Convert a linked-list queue to static (Not optimized DMA queue execution). + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_ConvertQToStatic(DMA_QListTypeDef *const pQList) +{ + uint32_t cllr_offset; + uint32_t currentnode_addr; + DMA_NodeTypeDef context_node; + + /* Check the queue parameter */ + if (pQList == NULL) + { + return HAL_ERROR; + } + + /* Check the queue */ + if (pQList->Head == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_EMPTY; + + return HAL_ERROR; + } + + /* Check if queue is static */ + if (pQList->Type == QUEUE_TYPE_STATIC) + { + return HAL_OK; + } + + /* Set current node address */ + currentnode_addr = (uint32_t)pQList->Head; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_BUSY; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Get CLLR register mask and offset */ + DMA_List_GetCLLRNodeInfo(pQList->Head, NULL, &cllr_offset); + + /* Set all CLLR queue nodes to their default positions */ + DMA_List_UpdateStaticQueueNodesCLLR(pQList, UPDATE_CLLR_POSITION); + + /* Convert all nodes to static (Bypass head node) */ + for (uint32_t node_count = 1U; node_count < pQList->NodeNumber; node_count++) + { + /* Update context node register values */ + DMA_List_FillNode((DMA_NodeTypeDef *)currentnode_addr, &context_node); + + /* Update node address */ + MODIFY_REG(currentnode_addr, DMA_CLLR_LA, (context_node.LinkRegisters[cllr_offset] & DMA_CLLR_LA)); + + /* Convert current node to static */ + DMA_List_ConvertNodeToStatic((uint32_t)&context_node, currentnode_addr, (cllr_offset + 1U)); + } + + /* Set all CLLR queue nodes to their default values */ + DMA_List_UpdateStaticQueueNodesCLLR(pQList, UPDATE_CLLR_VALUE); + + /* Set queue type */ + pQList->Type = QUEUE_TYPE_STATIC; + + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Update the queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Link linked-list queue to a DMA channel. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_LinkQ(DMA_HandleTypeDef *const hdma, + DMA_QListTypeDef *const pQList) +{ + HAL_DMA_StateTypeDef state; + + /* Check the DMA channel handle and the queue parameters */ + if ((hdma == NULL) || (pQList == NULL)) + { + return HAL_ERROR; + } + + /* Get DMA state */ + state = hdma->State; + + /* Check DMA channel state */ + if ((hdma->State == HAL_DMA_STATE_BUSY) || (state == HAL_DMA_STATE_SUSPEND)) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + /* Check queue state */ + if (pQList->State == HAL_DMA_QUEUE_STATE_BUSY) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_BUSY; + + return HAL_ERROR; + } + + /* Check linearity compatibility */ + if ((IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance) == 0U) && + ((pQList->Head->NodeInfo & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR)) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_UNSUPPORTED; + + return HAL_ERROR; + } + + /* Check circularity compatibility */ + if (hdma->Mode == DMA_LINKEDLIST_CIRCULAR) + { + /* Check first circular node */ + if (pQList->FirstCircularNode == NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + } + else + { + /* Check first circular node */ + if (pQList->FirstCircularNode != NULL) + { + /* Update the queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_INVALIDTYPE; + + return HAL_ERROR; + } + } + + /* Register queue to DMA handle */ + hdma->LinkedListQueue = pQList; + + return HAL_OK; +} + +/** + * @brief Unlink linked-list queue from a DMA channel. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_List_UnLinkQ(DMA_HandleTypeDef *const hdma) +{ + HAL_DMA_StateTypeDef state; + + /* Check the DMA channel parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Get DMA state */ + state = hdma->State; + + /* Check DMA channel state */ + if ((hdma->State == HAL_DMA_STATE_BUSY) || (state == HAL_DMA_STATE_SUSPEND)) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + /* Clear queue information from DMA channel handle */ + hdma->LinkedListQueue = NULL; + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMAEx_Exported_Functions_Group4 + * +@verbatim + ====================================================================================================================== + ##### Data handling, repeated block and trigger configuration functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Configure DMA channel data handling. + (+) Configure DMA channel repeated block. + (+) Configure DMA channel trigger. + + [..] + (+) The HAL_DMAEx_ConfigDataHandling() function allows to configure DMA channel data handling. + (++) GPDMA or HPDMA data handling : byte-based reordering, packing/unpacking, padding/truncation, + sign extension and left/right alignment. + + (+) The HAL_DMAEx_ConfigTrigger() function allows to configure DMA channel HW triggers. + + (+) The HAL_DMAEx_ConfigRepeatBlock() function allows to configure DMA channel repeated block. + (++) This feature is available only for channel that supports 2 dimensions addressing capability. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMA channel data handling according to the specified parameters in the + * DMA_DataHandlingConfTypeDef. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA Channel. + * @param pConfigDataHandling : Pointer to a DMA_DataHandlingConfTypeDef structure that contains the data handling + * configuration. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigDataHandling(DMA_HandleTypeDef *const hdma, + DMA_DataHandlingConfTypeDef const *const pConfigDataHandling) +{ + /* Check the DMA peripheral handle and data handling parameters */ + if ((hdma == NULL) || (pConfigDataHandling == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_DATA_ALIGNMENT(pConfigDataHandling->DataAlignment)); + assert_param(IS_DMA_DATA_EXCHANGE(pConfigDataHandling->DataExchange)); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + MODIFY_REG(hdma->Instance->CTR1, (DMA_CTR1_DWX | DMA_CTR1_DHX | DMA_CTR1_DBX | DMA_CTR1_SBX | DMA_CTR1_PAM), + (pConfigDataHandling->DataAlignment | pConfigDataHandling->DataExchange)); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the DMA channel trigger according to the specified parameters in the DMA_TriggerConfTypeDef. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for + * the specified DMA Channel. + * @param pConfigTrigger : Pointer to a DMA_TriggerConfTypeDef structure that contains the trigger configuration. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigTrigger(DMA_HandleTypeDef *const hdma, + DMA_TriggerConfTypeDef const *const pConfigTrigger) +{ + /* Check the DMA peripheral handle and trigger parameters */ + if ((hdma == NULL) || (pConfigTrigger == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_TRIGGER_POLARITY(pConfigTrigger->TriggerPolarity)); + assert_param(IS_DMA_TRIGGER_MODE(pConfigTrigger->TriggerMode)); + assert_param(IS_DMA_TRIGGER_SELECTION(pConfigTrigger->TriggerSelection)); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + MODIFY_REG(hdma->Instance->CTR2, (DMA_CTR2_TRIGPOL | DMA_CTR2_TRIGSEL | DMA_CTR2_TRIGM), + (pConfigTrigger->TriggerPolarity | pConfigTrigger->TriggerMode | + (pConfigTrigger->TriggerSelection << DMA_CTR2_TRIGSEL_Pos))); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the DMA channel repeated block according to the specified parameters in the + * DMA_RepeatBlockConfTypeDef. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA Channel. + * @param pConfigRepeatBlock : Pointer to a DMA_RepeatBlockConfTypeDef structure that contains the repeated block + * configuration. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigRepeatBlock(DMA_HandleTypeDef *const hdma, + DMA_RepeatBlockConfTypeDef const *const pConfigRepeatBlock) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + + /* Check the DMA peripheral handle and repeated block parameters */ + if ((hdma == NULL) || (pConfigRepeatBlock == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_REPEAT_COUNT(pConfigRepeatBlock->RepeatCount)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pConfigRepeatBlock->SrcAddrOffset)); + assert_param(IS_DMA_BURST_ADDR_OFFSET(pConfigRepeatBlock->DestAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pConfigRepeatBlock->BlkSrcAddrOffset)); + assert_param(IS_DMA_BLOCK_ADDR_OFFSET(pConfigRepeatBlock->BlkDestAddrOffset)); + + /* Check DMA channel state */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Store repeat block count */ + tmpreg1 = ((pConfigRepeatBlock->RepeatCount - 1U) << DMA_CBR1_BRC_Pos); + + /* Check the sign of single/burst destination address offset value */ + if (pConfigRepeatBlock->DestAddrOffset < 0) + { + /* Store single/burst destination address offset configuration (signed case) */ + tmpreg1 |= DMA_CBR1_DDEC; + tmpreg2 = (uint32_t)(- pConfigRepeatBlock->DestAddrOffset); + tmpreg2 = tmpreg2 << DMA_CTR3_DAO_Pos; + } + else + { + /* Store single/burst destination address offset configuration (unsigned case) */ + tmpreg2 = ((uint32_t)pConfigRepeatBlock->DestAddrOffset << DMA_CTR3_DAO_Pos); + } + + /* Check the sign of single/burst source address offset value */ + if (pConfigRepeatBlock->SrcAddrOffset < 0) + { + /* Store single/burst source address offset configuration (signed case) */ + tmpreg1 |= DMA_CBR1_SDEC; + tmpreg2 |= (uint32_t)(- pConfigRepeatBlock->SrcAddrOffset); + } + else + { + /* Store single/burst source address offset configuration (unsigned case) */ + tmpreg2 |= (uint32_t)pConfigRepeatBlock->SrcAddrOffset; + } + + /* Write DMA Channel Transfer Register 3 (CTR3) */ + WRITE_REG(hdma->Instance->CTR3, tmpreg2); + + /* Check the sign of block destination address offset value */ + if (pConfigRepeatBlock->BlkDestAddrOffset < 0) + { + /* Store block destination address offset configuration (signed case) */ + tmpreg1 |= DMA_CBR1_BRDDEC; + tmpreg2 = (uint32_t)(- pConfigRepeatBlock->BlkDestAddrOffset); + tmpreg2 = tmpreg2 << DMA_CBR2_BRDAO_Pos; + } + else + { + /* Store block destination address offset configuration (unsigned case) */ + tmpreg2 = ((uint32_t)pConfigRepeatBlock->BlkDestAddrOffset << DMA_CBR2_BRDAO_Pos); + } + + /* Check the sign of block source address offset value */ + if (pConfigRepeatBlock->BlkSrcAddrOffset < 0) + { + /* Store block source address offset configuration (signed case) */ + tmpreg1 |= DMA_CBR1_BRSDEC; + tmpreg2 |= (uint32_t)(- pConfigRepeatBlock->BlkSrcAddrOffset); + } + else + { + /* Store block source address offset configuration (unsigned case) */ + tmpreg2 |= (uint32_t)pConfigRepeatBlock->BlkSrcAddrOffset; + } + + /* Write DMA Channel block register 2 (CBR2) */ + WRITE_REG(hdma->Instance->CBR2, tmpreg2); + + /* Write DMA Channel block register 1 (CBR1) */ + WRITE_REG(hdma->Instance->CBR1, tmpreg1); + } + else + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMAEx_Exported_Functions_Group5 + * +@verbatim + ====================================================================================================================== + ##### Suspend and resume operation functions ##### + ====================================================================================================================== + [..] + This section provides functions allowing to : + (+) Suspend any ongoing DMA channel transfer. + (+) Resume any suspended DMA channel transfer. + + [..] + (+) The HAL_DMAEx_Suspend() function allows to suspend any ongoing DMA channel transfer in polling mode (Blocking + mode). + + (+) The HAL_DMAEx_Suspend_IT() function allows to suspend any ongoing DMA channel transfer in interrupt mode + (Non-blocking mode). + + (+) The HAL_DMAEx_Resume() function allows to resume any suspended DMA channel transfer. + +@endverbatim + * @{ + */ + +/** + * @brief Suspend any ongoing DMA channel transfer in polling mode (Blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA channel. + * @note After suspending a DMA channel, a check for wait until the DMA channel is effectively suspended is added. If + * a channel is suspended while a data transfer is ongoing, the current data will be transferred and the + * channel will be effectively suspended only after the transfer of this single/burst data is finished. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_Suspend(DMA_HandleTypeDef *const hdma) +{ + /* Get tick number */ + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Suspend the channel */ + hdma->Instance->CCR |= DMA_CCR_SUSP; + + /* Check if the DMA channel is suspended */ + while ((hdma->Instance->CSR & DMA_CSR_SUSPF) == 0U) + { + /* Check for the timeout */ + if ((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update the DMA channel error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_SUSPEND; + } + + return HAL_OK; +} + +/** + * @brief Suspend any ongoing DMA channel transfer in polling mode (Non-blocking mode). + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_Suspend_IT(DMA_HandleTypeDef *const hdma) +{ + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Suspend the DMA channel and activate suspend interrupt */ + hdma->Instance->CCR |= (DMA_CCR_SUSP | DMA_CCR_SUSPIE); + } + + return HAL_OK; +} + +/** + * @brief Resume any suspended DMA channel transfer. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DMAEx_Resume(DMA_HandleTypeDef *const hdma) +{ + /* Check the DMA peripheral handle parameter */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check DMA channel state */ + if (hdma->State != HAL_DMA_STATE_SUSPEND) + { + /* Update the DMA channel error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Resume the DMA channel */ + hdma->Instance->CCR &= (~DMA_CCR_SUSP); + + /* Clear the suspend flag */ + hdma->Instance->CFCR |= DMA_CFCR_SUSPF; + + /* Update the DMA channel state */ + hdma->State = HAL_DMA_STATE_BUSY; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup DMAEx_Exported_Functions_Group6 + * +@verbatim + ====================================================================================================================== + ##### Fifo status function ##### + ====================================================================================================================== + [..] + This section provides function allowing to get DMA channel FIFO level. + + [..] + (+) The HAL_DMAEx_GetFifoLevel() function allows to return the number of available write beats in the FIFO, in + units of the programmed destination data. + (++) This API is available only for DMA channels that supports FIFO. + +@endverbatim + * @{ + */ + +/** + * @brief Get and returns the DMA channel FIFO level. + * @param hdma : Pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval Returns the number of available beats in FIFO. + */ +uint32_t HAL_DMAEx_GetFifoLevel(DMA_HandleTypeDef const *const hdma) +{ + return ((hdma->Instance->CSR & DMA_CSR_FIFOL) >> DMA_CSR_FIFOL_Pos); +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Functions DMAEx Private Functions + * @brief DMAEx Private Functions + * @{ + */ + +/** + * @brief Initialize the DMA handle according to the specified parameters in the DMA_InitTypeDef. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains the configuration information for the + * specified DMA Channel. + * @retval None. + */ +static void DMA_List_Init(DMA_HandleTypeDef const *const hdma) +{ + uint32_t tmpreg; + + /* Prepare DMA Channel Control Register (CCR) value */ + tmpreg = hdma->InitLinkedList.Priority | hdma->InitLinkedList.LinkStepMode; + + /* Check DMA channel instance */ + if ((IS_HPDMA_INSTANCE(hdma->Instance) != 0U) || (IS_GPDMA_INSTANCE(hdma->Instance) != 0U)) + { + tmpreg |= hdma->InitLinkedList.LinkAllocatedPort; + } + + /* Write DMA Channel Control Register (CCR) */ + MODIFY_REG(hdma->Instance->CCR, DMA_CCR_PRIO | DMA_CCR_LAP | DMA_CCR_LSM, tmpreg); + + /* Write DMA Channel Control Register (CTR1) */ + WRITE_REG(hdma->Instance->CTR1, 0U); + + /* Write DMA Channel Control Register (CTR2) */ + WRITE_REG(hdma->Instance->CTR2, hdma->InitLinkedList.TransferEventMode); + + /* Write DMA Channel Control Register (CBR1) */ + WRITE_REG(hdma->Instance->CBR1, 0U); + + /* Write DMA Channel Control Register (CSAR) */ + WRITE_REG(hdma->Instance->CSAR, 0U); + + /* Write DMA Channel Control Register (CDAR) */ + WRITE_REG(hdma->Instance->CDAR, 0U); + + /* If 2D Addressing is supported by current channel */ + if (IS_DMA_2D_ADDRESSING_INSTANCE(hdma->Instance) != 0U) + { + /* Write DMA Channel Control Register (CTR3) */ + WRITE_REG(hdma->Instance->CTR3, 0U); + + /* Write DMA Channel Control Register (CBR2) */ + WRITE_REG(hdma->Instance->CBR2, 0U); + } + + /* Write DMA Channel linked-list address register (CLLR) */ + WRITE_REG(hdma->Instance->CLLR, 0U); +} + +/** + * @brief Build a DMA channel node according to the specified parameters in the DMA_NodeConfTypeDef. + * @param pNodeConfig : Pointer to a DMA_NodeConfTypeDef structure that contains the configuration information for the + * specified DMA linked-list Node. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @retval None. + */ +static void DMA_List_BuildNode(DMA_NodeConfTypeDef const *const pNodeConfig, + DMA_NodeTypeDef *const pNode) +{ + int32_t blockoffset; + + /* Update CTR1 register value ***************************************************************************************/ + /* Prepare DMA channel transfer register (CTR1) value */ + pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] = pNodeConfig->Init.DestInc | + pNodeConfig->Init.DestDataWidth | + pNodeConfig->DataHandlingConfig.DataAlignment | + pNodeConfig->Init.SrcInc | + pNodeConfig->Init.SrcDataWidth; + + + /* Add parameters related to DMA configuration */ + if ((pNodeConfig->NodeType & (DMA_CHANNEL_TYPE_GPDMA | DMA_CHANNEL_TYPE_HPDMA)) != 0U) + { + /* Prepare DMA channel transfer register (CTR1) value */ + pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] |= + (pNodeConfig->Init.TransferAllocatedPort | pNodeConfig->DataHandlingConfig.DataExchange | + (((pNodeConfig->Init.DestBurstLength - 1U) << DMA_CTR1_DBL_1_Pos) & DMA_CTR1_DBL_1) | + (((pNodeConfig->Init.SrcBurstLength - 1U) << DMA_CTR1_SBL_1_Pos) & DMA_CTR1_SBL_1)); + } + /*********************************************************************************** CTR1 register value is updated */ + + + /* Update CTR2 register value ***************************************************************************************/ + /* Prepare DMA channel transfer register 2 (CTR2) value */ + pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] = pNodeConfig->Init.TransferEventMode | + (pNodeConfig->Init.Request & (DMA_CTR2_REQSEL | DMA_CTR2_SWREQ)); + + /* Check for memory to peripheral transfer */ + if ((pNodeConfig->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Check for GPDMA OR HPDMA */ + if ((pNodeConfig->NodeType & (DMA_CHANNEL_TYPE_GPDMA | DMA_CHANNEL_TYPE_HPDMA)) != 0U) + { + pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] |= DMA_CTR2_DREQ; + } + } + /* Memory to memory transfer */ + else if ((pNodeConfig->Init.Direction) == DMA_MEMORY_TO_MEMORY) + { + pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] |= DMA_CTR2_SWREQ; + } + else + { + /* Prevent MISRA-C2012-Rule-15.7 */ + } + + /* Configure HW Peripheral flow control selection */ + pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] |= pNodeConfig->Init.Mode; + + /* Check if trigger feature is active */ + if (pNodeConfig->TriggerConfig.TriggerPolarity != DMA_TRIG_POLARITY_MASKED) + { + /* Prepare DMA channel transfer register 2 (CTR2) value */ + pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] |= + pNodeConfig->TriggerConfig.TriggerMode | pNodeConfig->TriggerConfig.TriggerPolarity | + ((pNodeConfig->TriggerConfig.TriggerSelection << DMA_CTR2_TRIGSEL_Pos) & DMA_CTR2_TRIGSEL); + } + /*********************************************************************************** CTR2 register value is updated */ + + + /* Update CBR1 register value ***************************************************************************************/ + /* Prepare DMA channel block register 1 (CBR1) value */ + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = (pNodeConfig->DataSize & DMA_CBR1_BNDT); + + /* If 2D addressing is supported by the selected DMA channel */ + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + /* Set the new CBR1 Register value */ + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] |= + (((pNodeConfig->RepeatBlockConfig.RepeatCount - 1U) << DMA_CBR1_BRC_Pos) & DMA_CBR1_BRC); + + /* If the source address offset is negative, set SDEC bit */ + if (pNodeConfig->RepeatBlockConfig.SrcAddrOffset < 0) + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] |= DMA_CBR1_SDEC; + } + else + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] &= (~DMA_CBR1_SDEC); + } + + /* If the destination address offset is negative, set DDEC bit */ + if (pNodeConfig->RepeatBlockConfig.DestAddrOffset < 0) + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] |= DMA_CBR1_DDEC; + } + else + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] &= (~DMA_CBR1_DDEC); + } + + /* If the repeated block source address offset is negative, set BRSEC bit */ + if (pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset < 0) + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] |= DMA_CBR1_BRSDEC; + } + else + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] &= (~DMA_CBR1_BRSDEC); + } + + /* if the repeated block destination address offset is negative, set BRDEC bit */ + if (pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset < 0) + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] |= DMA_CBR1_BRDDEC; + } + else + { + pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] &= (~DMA_CBR1_BRDDEC); + } + } + /*********************************************************************************** CBR1 register value is updated */ + + + /* Update CSAR register value ***************************************************************************************/ + pNode->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = pNodeConfig->SrcAddress; + /*********************************************************************************** CSAR register value is updated */ + + + /* Update CDAR register value ***************************************************************************************/ + pNode->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = pNodeConfig->DstAddress; + /*********************************************************************************** CDAR register value is updated */ + + /* Check if the selected channel is 2D addressing */ + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + /* Update CTR3 register value *************************************************************************************/ + /* Write new CTR3 Register value : source address offset */ + if (pNodeConfig->RepeatBlockConfig.SrcAddrOffset < 0) + { + blockoffset = (- pNodeConfig->RepeatBlockConfig.SrcAddrOffset); + pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] = ((uint32_t)blockoffset & DMA_CTR3_SAO); + } + else + { + pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] = + ((uint32_t)pNodeConfig->RepeatBlockConfig.SrcAddrOffset & DMA_CTR3_SAO); + } + + /* Write new CTR3 Register value : destination address offset */ + if (pNodeConfig->RepeatBlockConfig.DestAddrOffset < 0) + { + blockoffset = (- pNodeConfig->RepeatBlockConfig.DestAddrOffset); + pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] |= (((uint32_t)blockoffset << DMA_CTR3_DAO_Pos) & DMA_CTR3_DAO); + } + else + { + pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] |= + (((uint32_t)pNodeConfig->RepeatBlockConfig.DestAddrOffset << DMA_CTR3_DAO_Pos) & DMA_CTR3_DAO); + } + /********************************************************************************* CTR3 register value is updated */ + + + /* Update CBR2 register value *************************************************************************************/ + /* Write new CBR2 Register value : repeated block source address offset */ + if (pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset < 0) + { + blockoffset = (- pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset); + pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] = ((uint32_t)blockoffset & DMA_CBR2_BRSAO); + } + else + { + pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] = + ((uint32_t)pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset & DMA_CBR2_BRSAO); + } + + /* Write new CBR2 Register value : repeated block destination address offset */ + if (pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset < 0) + { + blockoffset = (- pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset); + pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] |= + (((uint32_t)blockoffset & DMA_CBR2_BRSAO) << DMA_CBR2_BRDAO_Pos); + } + else + { + pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] |= + (((uint32_t)pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset << DMA_CBR2_BRDAO_Pos) & DMA_CBR2_BRDAO); + } + /********************************************************************************* CBR2 register value is updated */ + } + + + /* Update node information value ************************************************************************************/ + /* Set node information */ + pNode->NodeInfo = pNodeConfig->NodeType; + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + pNode->NodeInfo |= (NODE_CLLR_2D_DEFAULT_OFFSET << NODE_CLLR_IDX_POS); + } + else + { + pNode->NodeInfo |= (NODE_CLLR_LINEAR_DEFAULT_OFFSET << NODE_CLLR_IDX_POS); + } + /******************************************************************************** Node information value is updated */ +} + +/** + * @brief Get a DMA channel node configuration. + * @param pNodeConfig : Pointer to a DMA_NodeConfTypeDef structure that contains the configuration information for the + * specified DMA linked-list Node. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @retval None. + */ +static void DMA_List_GetNodeConfig(DMA_NodeConfTypeDef *const pNodeConfig, + DMA_NodeTypeDef const *const pNode) +{ + uint16_t offset; + + /* Get node information *********************************************************************************************/ + pNodeConfig->NodeType = (pNode->NodeInfo & NODE_TYPE_MASK); + /*************************************************************************************** Node type value is updated */ + + + /* Get CTR1 fields values *******************************************************************************************/ + pNodeConfig->Init.SrcInc = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_SINC; + pNodeConfig->Init.DestInc = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DINC; + pNodeConfig->Init.SrcDataWidth = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_SDW_LOG2; + pNodeConfig->Init.DestDataWidth = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + pNodeConfig->Init.SrcBurstLength = ((pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & + DMA_CTR1_SBL_1) >> DMA_CTR1_SBL_1_Pos) + 1U; + pNodeConfig->Init.DestBurstLength = ((pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & + DMA_CTR1_DBL_1) >> DMA_CTR1_DBL_1_Pos) + 1U; + pNodeConfig->Init.TransferAllocatedPort = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & + (DMA_CTR1_SAP | DMA_CTR1_DAP); + pNodeConfig->DataHandlingConfig.DataExchange = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & + (DMA_CTR1_SBX | DMA_CTR1_DBX | DMA_CTR1_DHX | DMA_CTR1_DWX); + pNodeConfig->DataHandlingConfig.DataAlignment = pNode->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_PAM; + /*********************************************************************************** CTR1 fields values are updated */ + + + /* Get CTR2 fields values *******************************************************************************************/ + if ((pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_SWREQ) != 0U) + { + pNodeConfig->Init.Request = DMA_REQUEST_SW; + pNodeConfig->Init.Direction = DMA_MEMORY_TO_MEMORY; + } + else + { + pNodeConfig->Init.Request = pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_REQSEL; + + if ((pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_DREQ) != 0U) + { + pNodeConfig->Init.Direction = DMA_MEMORY_TO_PERIPH; + } + else + { + pNodeConfig->Init.Direction = DMA_PERIPH_TO_MEMORY; + } + } + + pNodeConfig->Init.BlkHWRequest = (pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_BREQ); + pNodeConfig->TriggerConfig.TriggerMode = pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_TRIGM; + pNodeConfig->TriggerConfig.TriggerPolarity = pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_TRIGPOL; + pNodeConfig->TriggerConfig.TriggerSelection = (pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & + DMA_CTR2_TRIGSEL) >> DMA_CTR2_TRIGSEL_Pos; + pNodeConfig->Init.TransferEventMode = pNode->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET] & DMA_CTR2_TCEM; + /*********************************************************************************** CTR2 fields values are updated */ + + + /* Get CBR1 fields **************************************************************************************************/ + pNodeConfig->DataSize = pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_BNDT; + + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + pNodeConfig->RepeatBlockConfig.RepeatCount = + ((pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_BRC) >> DMA_CBR1_BRC_Pos) + 1U; + } + else + { + pNodeConfig->RepeatBlockConfig.RepeatCount = 1U; + } + /*********************************************************************************** CBR1 fields values are updated */ + + + /* Get CSAR field ***************************************************************************************************/ + pNodeConfig->SrcAddress = pNode->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET]; + /************************************************************************************** CSAR field value is updated */ + + + /* Get CDAR field ***************************************************************************************************/ + pNodeConfig->DstAddress = pNode->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET]; + /************************************************************************************** CDAR field value is updated */ + + /* Check if the selected channel is 2D addressing */ + if ((pNodeConfig->NodeType & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + /* Get CTR3 field *************************************************************************************************/ + offset = (uint16_t)(pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] & DMA_CTR3_SAO); + pNodeConfig->RepeatBlockConfig.SrcAddrOffset = (int32_t)offset; + + offset = (uint16_t)((pNode->LinkRegisters[NODE_CTR3_DEFAULT_OFFSET] & DMA_CTR3_DAO) >> DMA_CTR3_DAO_Pos); + pNodeConfig->RepeatBlockConfig.DestAddrOffset = (int32_t)offset; + + if ((pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_SDEC) != 0U) + { + pNodeConfig->RepeatBlockConfig.SrcAddrOffset *= (-1); + } + + if ((pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_DDEC) != 0U) + { + pNodeConfig->RepeatBlockConfig.DestAddrOffset *= (-1); + } + /************************************************************************************ CTR3 field value is updated */ + + + /* Get CBR2 fields ************************************************************************************************/ + offset = (uint16_t)(pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] & DMA_CBR2_BRSAO); + pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset = (int32_t)offset; + + offset = (uint16_t)((pNode->LinkRegisters[NODE_CBR2_DEFAULT_OFFSET] & DMA_CBR2_BRDAO) >> DMA_CBR2_BRDAO_Pos); + pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset = (int32_t)offset; + + if ((pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_BRSDEC) != 0U) + { + pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset *= (-1); + } + + if ((pNode->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] & DMA_CBR1_BRDDEC) != 0U) + { + pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset *= (-1); + } + /************************************************************************************ CBR2 field value is updated */ + } + else + { + /* Get CTR3 field *************************************************************************************************/ + pNodeConfig->RepeatBlockConfig.SrcAddrOffset = 0; + pNodeConfig->RepeatBlockConfig.DestAddrOffset = 0; + /************************************************************************************ CTR3 field value is updated */ + + + /* Get CBR2 fields ************************************************************************************************/ + pNodeConfig->RepeatBlockConfig.BlkSrcAddrOffset = 0; + pNodeConfig->RepeatBlockConfig.BlkDestAddrOffset = 0; + /************************************************************************************ CBR2 field value is updated */ + } +} + +/** + * @brief Check nodes base addresses compatibility. + * @param pNode1 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 1 registers configurations. + * @param pNode2 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 2 registers configurations. + * @param pNode3 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 3 registers configurations. + * @retval Return 0 when nodes addresses are compatible, 1 otherwise. + */ +static uint32_t DMA_List_CheckNodesBaseAddresses(DMA_NodeTypeDef const *const pNode1, + DMA_NodeTypeDef const *const pNode2, + DMA_NodeTypeDef const *const pNode3) +{ + uint32_t temp = (((uint32_t)pNode1 | (uint32_t)pNode2 | (uint32_t)pNode3) & DMA_CLBAR_LBA); + uint32_t ref = 0U; + + /* Check node 1 address */ + if ((uint32_t)pNode1 != 0U) + { + ref = (uint32_t)pNode1; + } + /* Check node 2 address */ + else if ((uint32_t)pNode2 != 0U) + { + ref = (uint32_t)pNode2; + } + /* Check node 3 address */ + else if ((uint32_t)pNode3 != 0U) + { + ref = (uint32_t)pNode3; + } + else + { + /* Prevent MISRA-C2012-Rule-15.7 */ + } + + /* Check addresses compatibility */ + if (temp != ((uint32_t)ref & DMA_CLBAR_LBA)) + { + return 1U; + } + + return 0U; +} + +/** + * @brief Check nodes types compatibility. + * @param pNode1 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 1 registers configurations. + * @param pNode2 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 2 registers configurations. + * @param pNode3 : Pointer to a DMA_NodeTypeDef structure that contains linked-list node 3 registers configurations. + * @retval Return 0 when nodes types are compatible, otherwise nodes types are not compatible. + */ +static uint32_t DMA_List_CheckNodesTypes(DMA_NodeTypeDef const *const pNode1, + DMA_NodeTypeDef const *const pNode2, + DMA_NodeTypeDef const *const pNode3) +{ + uint32_t ref = 0U; + + /* Check node 1 parameter */ + if (pNode1 != NULL) + { + ref = pNode1->NodeInfo & NODE_TYPE_MASK; + } + /* Check node 2 parameter */ + else if (pNode2 != NULL) + { + ref = pNode2->NodeInfo & NODE_TYPE_MASK; + } + /* Check node 3 parameter */ + else if (pNode3 != NULL) + { + ref = pNode3->NodeInfo & NODE_TYPE_MASK; + } + else + { + /* Prevent MISRA-C2012-Rule-15.7 */ + } + + /* Check node 2 parameter */ + if (pNode2 != NULL) + { + /* Check node type compatibility */ + if (ref != (pNode2->NodeInfo & NODE_TYPE_MASK)) + { + return 2U; + } + } + + /* Check node 3 parameter */ + if (pNode3 != NULL) + { + /* Check node type compatibility */ + if (ref != (pNode3->NodeInfo & NODE_TYPE_MASK)) + { + return 3U; + } + } + + return 0U; +} + +/** + * @brief Check nodes types compatibility. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @param cllr_mask : Pointer to CLLR register mask value. + * @param cllr_offset : Pointer to CLLR register offset value. + * @retval None. + */ +static void DMA_List_GetCLLRNodeInfo(DMA_NodeTypeDef const *const pNode, + uint32_t *const cllr_mask, + uint32_t *const cllr_offset) +{ + /* Check node type */ + if ((pNode->NodeInfo & DMA_CHANNEL_TYPE_2D_ADDR) == DMA_CHANNEL_TYPE_2D_ADDR) + { + /* Update CLLR register mask value */ + if (cllr_mask != NULL) + { + *cllr_mask = DMA_CLLR_UT1 | DMA_CLLR_UT2 | DMA_CLLR_UB1 | DMA_CLLR_USA | DMA_CLLR_UDA | DMA_CLLR_UT3 | + DMA_CLLR_UB2 | DMA_CLLR_ULL; + } + + /* Update CLLR register offset */ + if (cllr_offset != NULL) + { + *cllr_offset = NODE_CLLR_2D_DEFAULT_OFFSET; + } + } + /* Update CLLR and register number for linear addressing node */ + else + { + /* Update CLLR register mask value */ + if (cllr_mask != NULL) + { + *cllr_mask = DMA_CLLR_UT1 | DMA_CLLR_UT2 | DMA_CLLR_UB1 | DMA_CLLR_USA | DMA_CLLR_UDA | DMA_CLLR_ULL; + } + + /* Update CLLR register offset */ + if (cllr_offset != NULL) + { + *cllr_offset = NODE_CLLR_LINEAR_DEFAULT_OFFSET; + } + } +} + +/** + * @brief Find node in queue. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers configurations. + * @param NodeInfo : Pointer to a DMA_NodeInQInfoTypeDef structure that contains node linked to queue information. + * @retval Return 0 when node is found in selected queue, otherwise node is not found. + */ +static uint32_t DMA_List_FindNode(DMA_QListTypeDef const *const pQList, + DMA_NodeTypeDef const *const pNode, + DMA_NodeInQInfoTypeDef *const NodeInfo) +{ + uint32_t node_idx = 0U; + uint32_t currentnode_address = 0U; + uint32_t previousnode_address = 0U; + uint32_t cllr_offset = NodeInfo->cllr_offset; + + /* Find last node in queue */ + if (pNode == NULL) + { + /* Check that previous node is linked to the selected queue */ + while (node_idx < pQList->NodeNumber) + { + /* Get head node address */ + if (node_idx == 0U) + { + currentnode_address = (uint32_t)pQList->Head & DMA_CLLR_LA; + } + /* Calculate nodes addresses */ + else + { + previousnode_address = currentnode_address; + currentnode_address = + ((DMA_NodeTypeDef *)(currentnode_address + + ((uint32_t)pQList->Head & DMA_CLBAR_LBA)))->LinkRegisters[cllr_offset] & DMA_CLLR_LA; + } + + /* Increment node index */ + node_idx++; + } + } + /* Find selected node node in queue */ + else + { + /* Check that previous node is linked to the selected queue */ + while ((node_idx < pQList->NodeNumber) && (currentnode_address != ((uint32_t)pNode & DMA_CLLR_LA))) + { + /* Get head node address */ + if (node_idx == 0U) + { + currentnode_address = (uint32_t)pQList->Head & DMA_CLLR_LA; + } + /* Calculate nodes addresses */ + else + { + previousnode_address = currentnode_address; + currentnode_address = + ((DMA_NodeTypeDef *)(currentnode_address + + ((uint32_t)pQList->Head & DMA_CLBAR_LBA)))->LinkRegisters[cllr_offset] & DMA_CLLR_LA; + } + + /* Increment node index */ + node_idx++; + } + } + + /* Check stored address */ + if (pNode != NULL) + { + if (currentnode_address != ((uint32_t)pNode & DMA_CLLR_LA)) + { + return 1U; + } + } + + /* Update current node position */ + NodeInfo->currentnode_pos = node_idx; + + /* Update previous node address */ + NodeInfo->previousnode_addr = previousnode_address | ((uint32_t)pQList->Head & DMA_CLBAR_LBA); + + /* Update current node address */ + NodeInfo->currentnode_addr = currentnode_address | ((uint32_t)pQList->Head & DMA_CLBAR_LBA); + + /* Update next node address */ + if (((DMA_NodeTypeDef *)NodeInfo->currentnode_addr)->LinkRegisters[cllr_offset] != 0U) + { + NodeInfo->nextnode_addr = (((DMA_NodeTypeDef *)NodeInfo->currentnode_addr)->LinkRegisters[cllr_offset] & + DMA_CLLR_LA) | ((uint32_t)pQList->Head & DMA_CLBAR_LBA); + } + + return 0U; +} + +/** + * @brief Reset queue nodes. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param NodeInfo : Pointer to a DMA_NodeInQInfoTypeDef structure that contains node linked to queue information. + * @retval None. + */ +static void DMA_List_ResetQueueNodes(DMA_QListTypeDef const *const pQList, + DMA_NodeInQInfoTypeDef const *const NodeInfo) +{ + uint32_t node_idx = 0U; + uint32_t currentnode_address = 0U; + uint32_t previousnode_address; + uint32_t cllr_offset = NodeInfo->cllr_offset; + + /* Check that previous node is linked to the selected queue */ + while (node_idx < pQList->NodeNumber) + { + /* Get head node address */ + if (node_idx == 0U) + { + previousnode_address = (uint32_t)pQList->Head & DMA_CLLR_LA; + currentnode_address = (pQList->Head->LinkRegisters[cllr_offset] & DMA_CLLR_LA); + } + /* Calculate nodes addresses */ + else + { + previousnode_address = currentnode_address; + currentnode_address = + ((DMA_NodeTypeDef *)(currentnode_address + + ((uint32_t)pQList->Head & DMA_CLBAR_LBA)))->LinkRegisters[cllr_offset] & DMA_CLLR_LA; + } + + /* Reset node */ + ((DMA_NodeTypeDef *)(previousnode_address + + ((uint32_t)pQList->Head & DMA_CLBAR_LBA)))->LinkRegisters[cllr_offset] = 0U; + + /* Increment node index */ + node_idx++; + } +} + +/** + * @brief Fill source node registers values by destination nodes registers values. + * @param pSrcNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list source node registers + * configurations. + * @param pDestNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list destination node registers + * configurations. + * @retval None. + */ +static void DMA_List_FillNode(DMA_NodeTypeDef const *const pSrcNode, + DMA_NodeTypeDef *const pDestNode) +{ + /* Repeat for all register nodes */ + for (uint32_t reg_idx = 0U; reg_idx < NODE_MAXIMUM_SIZE; reg_idx++) + { + pDestNode->LinkRegisters[reg_idx] = pSrcNode->LinkRegisters[reg_idx]; + } + + /* Fill node information */ + pDestNode->NodeInfo = pSrcNode->NodeInfo; +} + +/** + * @brief Convert node to dynamic. + * @param ContextNodeAddr : The context node address. + * @param CurrentNodeAddr : The current node address to be converted. + * @param RegisterNumber : The register number to be converted. + * @retval None. + */ +static void DMA_List_ConvertNodeToDynamic(uint32_t ContextNodeAddr, + uint32_t CurrentNodeAddr, + uint32_t RegisterNumber) +{ + uint32_t currentnode_reg_counter = 0U; + uint32_t contextnode_reg_counter = 0U; + uint32_t cllr_idx = RegisterNumber - 1U; + DMA_NodeTypeDef *context_node = (DMA_NodeTypeDef *)ContextNodeAddr; + DMA_NodeTypeDef *current_node = (DMA_NodeTypeDef *)CurrentNodeAddr; + uint32_t update_link[NODE_MAXIMUM_SIZE] = {DMA_CLLR_UT1, DMA_CLLR_UT2, DMA_CLLR_UB1, DMA_CLLR_USA, + DMA_CLLR_UDA, DMA_CLLR_UT3, DMA_CLLR_UB2, DMA_CLLR_ULL + }; + + /* Update ULL position according to register number */ + update_link[cllr_idx] = update_link[NODE_MAXIMUM_SIZE - 1U]; + + /* Repeat for all node registers */ + while (contextnode_reg_counter != RegisterNumber) + { + /* Check if register values are equal (exception for CSAR, CDAR and CLLR registers) */ + if ((context_node->LinkRegisters[contextnode_reg_counter] == + current_node->LinkRegisters[currentnode_reg_counter]) && + (contextnode_reg_counter != NODE_CSAR_DEFAULT_OFFSET) && + (contextnode_reg_counter != NODE_CDAR_DEFAULT_OFFSET) && + (contextnode_reg_counter != (RegisterNumber - 1U))) + { + /* Format the node according to unused registers */ + DMA_List_FormatNode(current_node, currentnode_reg_counter, RegisterNumber, NODE_DYNAMIC_FORMAT); + + /* Update CLLR index */ + cllr_idx --; + + /* Update CLLR fields */ + current_node->LinkRegisters[cllr_idx] &= ~update_link[contextnode_reg_counter]; + } + else + { + /* Update context node register fields with new values */ + context_node->LinkRegisters[contextnode_reg_counter] = current_node->LinkRegisters[currentnode_reg_counter]; + + /* Update CLLR fields */ + current_node->LinkRegisters[cllr_idx] |= update_link[contextnode_reg_counter]; + + /* Increment current node number register counter */ + currentnode_reg_counter++; + } + + /* Increment context node number register counter */ + contextnode_reg_counter++; + } + + /* Update node information */ + MODIFY_REG(current_node->NodeInfo, NODE_CLLR_IDX, ((currentnode_reg_counter - 1U) << NODE_CLLR_IDX_POS)); + + /* Clear unused node fields */ + DMA_List_ClearUnusedFields(current_node, currentnode_reg_counter); +} + +/** + * @brief Convert node to static. + * @param ContextNodeAddr : The context node address. + * @param CurrentNodeAddr : The current node address to be converted. + * @param RegisterNumber : The register number to be converted. + * @retval None. + */ +static void DMA_List_ConvertNodeToStatic(uint32_t ContextNodeAddr, + uint32_t CurrentNodeAddr, + uint32_t RegisterNumber) +{ + uint32_t contextnode_reg_counter = 0U; + uint32_t cllr_idx; + uint32_t cllr_mask; + const DMA_NodeTypeDef *context_node = (DMA_NodeTypeDef *)ContextNodeAddr; + DMA_NodeTypeDef *current_node = (DMA_NodeTypeDef *)CurrentNodeAddr; + uint32_t update_link[NODE_MAXIMUM_SIZE] = {DMA_CLLR_UT1, DMA_CLLR_UT2, DMA_CLLR_UB1, DMA_CLLR_USA, + DMA_CLLR_UDA, DMA_CLLR_UT3, DMA_CLLR_UB2, DMA_CLLR_ULL + }; + + /* Update ULL position according to register number */ + update_link[RegisterNumber - 1U] = update_link[NODE_MAXIMUM_SIZE - 1U]; + + /* Get context node CLLR information */ + cllr_idx = (context_node->NodeInfo & NODE_CLLR_IDX) >> NODE_CLLR_IDX_POS; + cllr_mask = context_node->LinkRegisters[cllr_idx]; + + /* Repeat for all node registers */ + while (contextnode_reg_counter != RegisterNumber) + { + /* Check if node field is dynamic */ + if ((cllr_mask & update_link[contextnode_reg_counter]) == 0U) + { + /* Format the node according to unused registers */ + DMA_List_FormatNode(current_node, contextnode_reg_counter, RegisterNumber, NODE_STATIC_FORMAT); + + /* Update node field */ + current_node->LinkRegisters[contextnode_reg_counter] = context_node->LinkRegisters[contextnode_reg_counter]; + } + + /* Increment context node number register counter */ + contextnode_reg_counter++; + } + + /* Update node information */ + MODIFY_REG(current_node->NodeInfo, NODE_CLLR_IDX, ((RegisterNumber - 1U) << NODE_CLLR_IDX_POS)); +} + +/** + * @brief Format the node according to unused registers. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @param RegisterIdx : The first register index to be formatted. + * @param RegisterNumber : The number of node registers. + * @param Format : The format type. + * @retval None. + */ +static void DMA_List_FormatNode(DMA_NodeTypeDef *const pNode, + uint32_t RegisterIdx, + uint32_t RegisterNumber, + uint32_t Format) +{ + if (Format == NODE_DYNAMIC_FORMAT) + { + /* Repeat for all registers to be formatted */ + for (uint32_t reg_idx = RegisterIdx; reg_idx < (RegisterNumber - 1U); reg_idx++) + { + pNode->LinkRegisters[reg_idx] = pNode->LinkRegisters[reg_idx + 1U]; + } + } + else + { + /* Repeat for all registers to be formatted */ + for (uint32_t reg_idx = (RegisterNumber - 2U); reg_idx > RegisterIdx; reg_idx--) + { + pNode->LinkRegisters[reg_idx] = pNode->LinkRegisters[reg_idx - 1U]; + } + } +} + +/** + * @brief Clear unused register fields. + * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers + * configurations. + * @param FirstUnusedField : The first unused field to be cleared. + * @retval None. + */ +static void DMA_List_ClearUnusedFields(DMA_NodeTypeDef *const pNode, + uint32_t FirstUnusedField) +{ + /* Repeat for all unused fields */ + for (uint32_t reg_idx = FirstUnusedField; reg_idx < NODE_MAXIMUM_SIZE; reg_idx++) + { + pNode->LinkRegisters[reg_idx] = 0U; + } +} + +/** + * @brief Update CLLR for all dynamic queue nodes. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param LastNode_IsCircular : The first circular node is the last queue node or not. + * @retval None. + */ +static void DMA_List_UpdateDynamicQueueNodesCLLR(DMA_QListTypeDef const *const pQList, + uint32_t LastNode_IsCircular) +{ + uint32_t previous_cllr_offset; + uint32_t current_cllr_offset = 0U; + uint32_t previousnode_addr; + uint32_t currentnode_addr = (uint32_t)pQList->Head; + uint32_t cllr_mask; + uint32_t node_idx = 0U; + + /* Repeat for all register nodes */ + while (node_idx < pQList->NodeNumber) + { + /* Get head node address */ + if (node_idx == 0U) + { + /* Get current node information */ + current_cllr_offset = (((DMA_NodeTypeDef *)currentnode_addr)->NodeInfo & NODE_CLLR_IDX) >> NODE_CLLR_IDX_POS; + } + /* Calculate nodes addresses */ + else + { + /* Get previous node information */ + previousnode_addr = currentnode_addr; + previous_cllr_offset = current_cllr_offset; + + /* Get current node information */ + currentnode_addr = (((DMA_NodeTypeDef *)(previousnode_addr))->LinkRegisters[previous_cllr_offset] & DMA_CLLR_LA) + + ((uint32_t)pQList->Head & DMA_CLBAR_LBA); + current_cllr_offset = (((DMA_NodeTypeDef *)currentnode_addr)->NodeInfo & NODE_CLLR_IDX) >> NODE_CLLR_IDX_POS; + + /* Calculate CLLR register value to be updated */ + cllr_mask = (((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset] & ~DMA_CLLR_LA) | + (((DMA_NodeTypeDef *)(previousnode_addr))->LinkRegisters[previous_cllr_offset] & DMA_CLLR_LA); + + /* Set new CLLR value to previous node */ + ((DMA_NodeTypeDef *)(previousnode_addr))->LinkRegisters[previous_cllr_offset] = cllr_mask; + } + + /* Increment node index */ + node_idx++; + } + + /* Check queue circularity */ + if (pQList->FirstCircularNode != 0U) + { + /* First circular queue is not last queue node */ + if (LastNode_IsCircular == 0U) + { + /* Get CLLR node information */ + DMA_List_GetCLLRNodeInfo(((DMA_NodeTypeDef *)currentnode_addr), &cllr_mask, NULL); + + /* Update CLLR register for last circular node */ + ((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset] = + ((uint32_t)pQList->Head & DMA_CLLR_LA) | cllr_mask; + } + /* First circular queue is last queue node */ + else + { + /* Disable CLLR updating */ + ((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset] &= ~DMA_CLLR_ULL; + } + } + else + { + /* Clear CLLR register for last node */ + ((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset] = 0U; + } +} + +/** + * @brief Update CLLR for all static queue nodes. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @param operation : The operation type. + * @retval None. + */ +static void DMA_List_UpdateStaticQueueNodesCLLR(DMA_QListTypeDef const *const pQList, + uint32_t operation) +{ + uint32_t currentnode_addr = (uint32_t)pQList->Head; + uint32_t current_cllr_offset = ((uint32_t)pQList->Head->NodeInfo & NODE_CLLR_IDX) >> NODE_CLLR_IDX_POS; + uint32_t cllr_default_offset; + uint32_t cllr_default_mask; + uint32_t cllr_mask; + uint32_t node_idx = 0U; + + /* Get CLLR node information */ + DMA_List_GetCLLRNodeInfo(pQList->Head, &cllr_default_mask, &cllr_default_offset); + + /* Repeat for all register nodes (Bypass last queue node) */ + while (node_idx < pQList->NodeNumber) + { + if (operation == UPDATE_CLLR_POSITION) + { + /* Get CLLR value */ + cllr_mask = ((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset]; + } + else + { + /* Calculate CLLR value */ + cllr_mask = (((DMA_NodeTypeDef *)currentnode_addr)->LinkRegisters[current_cllr_offset] & DMA_CLLR_LA) | + cllr_default_mask; + } + + /* Set new CLLR value to default position */ + if ((node_idx == (pQList->NodeNumber - 1U)) && (pQList->FirstCircularNode == NULL)) + { + ((DMA_NodeTypeDef *)(currentnode_addr))->LinkRegisters[cllr_default_offset] = 0U; + } + else + { + ((DMA_NodeTypeDef *)(currentnode_addr))->LinkRegisters[cllr_default_offset] = cllr_mask; + } + + /* Update current node address with next node address */ + currentnode_addr = (currentnode_addr & DMA_CLBAR_LBA) | (cllr_mask & DMA_CLLR_LA); + + /* Update current CLLR offset with next CLLR offset */ + current_cllr_offset = (((DMA_NodeTypeDef *)currentnode_addr)->NodeInfo & NODE_CLLR_IDX) >> NODE_CLLR_IDX_POS; + + /* Increment node index */ + node_idx++; + } +} + +/** + * @brief Clean linked-list queue variable. + * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. + * @retval None. + */ +static void DMA_List_CleanQueue(DMA_QListTypeDef *const pQList) +{ + /* Clear head node */ + pQList->Head = NULL; + + /* Clear first circular queue node */ + pQList->FirstCircularNode = NULL; + + /* Reset node number */ + pQList->NodeNumber = 0U; + + /* Reset queue state */ + pQList->State = HAL_DMA_QUEUE_STATE_RESET; + + /* Reset queue error code */ + pQList->ErrorCode = HAL_DMA_QUEUE_ERROR_NONE; + + /* Reset queue type */ + pQList->Type = QUEUE_TYPE_STATIC; +} +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dts.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dts.c new file mode 100644 index 000000000..b4fb8e9d5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_dts.c @@ -0,0 +1,1087 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_dts.c + * @author MCD Application Team + * @brief DTS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the DTS peripheral: + * + Initialization and de-initialization functions + * + Start/Stop operation functions in polling mode. + * + Start/Stop operation functions in interrupt mode. + * + Peripheral Control functions + * + Peripheral State functions + * + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + @verbatim + ====================================================================================================================== + ##### DTS Peripheral features ##### + ====================================================================================================================== + + [..] + The STM32h7rsxx device family integrate one DTS sensor interface that converts the temperature into a square wave + which frequency is proportional to the temperature. + + (+) Temperature window comparator feature: + The DTS allows defining the high and low threshold that will be used for temperature comparison. + If the temperature data is equal or higher than the high threshold, or equal or lower than the low threshold, + an interrupt is generated and the corresponding flag. + + (+) Synchronous interrupts: + A global interrupt output line is available on the DTS block. The interrupt can be generated + at the end of measurement and/or when the measurement result is equal/higher or equal/lower than + a predefined threshold. + + (+) Asynchronous wakeup: + The DTS block provides an asynchronous interrupt line. It is used only when the LSE is selected as reference + clock. This line can generate a signal that wakes up the system from Sleep and stop mode at the end of + measurement and/or when the measurement result is equal/higher or equal/lower than a + predefined threshold. + + (+) Trigger inputs: + The temperature measurement can be triggered either by software or by an external event + as well as lowpower timer. + + (+) Measurement modes: + (++) Quick measure : measure without a calibration when a high precision is not required. + (++) Slow measure : measure with a calibration used when a high precision is required. + + (+) Sampling time: + The sampling time can be used to increase temperature measurement precision. + + (+) Prescaler: + When a calibration is ongoing, the counter clock must be slower than 1 MHz. This is + achieved by the PCLK clock prescaler embedded in the temperature sensor. + + (+) Operating Modes: + + (++) PCLK only : The temperature sensor registers can be accessed. The interface can consequently be + reconfigured and the measurement sequence is performed using PCLK clock. + + (++) PCLK and LSE : The temperature sensor registers can be accessed. The interface can consequently be + reconfigured and the measurement sequence is performed using the LSE clock. + + (++) LSE only : The registers cannot be accessed. The measurement can be performed using the LSE + clock This mode is used to exit from Sleep and stop mode by using hardware triggers + and the asynchronous interrupt line. + (+) Calibration: + The temperature sensor must run the calibration prior to any frequency measurement. The calibration is + performed automatically when the temperature measurement is triggered except for quick measurement mode. + + (+) Low power modes: + (++) Sleep mode: only works in LSE mode. + (++) Stop mode: only works in LSE mode. + + ====================================================================================================================== + ##### How to use this driver ##### + ====================================================================================================================== + [..] + This driver provides functions to configure and program the DTS instances of STM32H7RSxx devices. + + To use the DTS, perform the following steps: + + (+) Initialize the DTS low level resources by implementing the HAL_DTS_MspInit(): + + (++) If required enable the DTS interrupt by configuring and enabling EXTI line in Interrupt mode After that + enable the DTS interrupt vector using HAL_NVIC_EnableIRQ() function. + + (+) Configure the DTS using HAL_DTS_Init() function: + + (++) Select the quick measure option + (++) Select the reference clock. + (++) Select the trigger input. + (++) Select the sampling time. + (++) Select the high speed clock ratio divider. + (++) Select the low threshold + (++) Select the high threshold + + + (+) Use HAL_DTS_Start() to enable and start the DTS sensor in polling mode. + + (+) Use HAL_DTS_Start_IT() to enable and start the DTS sensor in interrupt mode. + + (+) Use HAL_DTS_GetTemperature() to get temperature from DTS. + + (+) Use HAL_DTS_Stop() to disable and stop the DTS sensor in polling mode. + + (+) Use HAL_DTS_Stop_IT() to disable and stop the DTS sensor in interrupt mode. + + (+) De-initialize the DTS using HAL_DTS_DeInit() function. + + *** Callback and interrupts *** + ============================================= + [..] + When the compilation flag USE_HAL_DTS_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration + feature is not available and all callbacks are set to the corresponding weak functions. + + (+) Implement the weak function HAL_DTS_EndCallback() to get a callback at the end of the temperature measurement. + (+) Implement the weak function HAL_DTS_HighCallback() to get a callback when the temperature + exceed the high threshold. + (+) Implement the weak function HAL_DTS_LowCallback() to get a callback when the temperature + go down the low threshold. + (+) Implement the weak function HAL_DTS_AsyncEndCallback() to get a callback at the end + of an asynchronous temperature measurement. + (+) Implement the weak function HAL_DTS_AsyncHighCallback() to get a callback when the temperature + exceed the high threshold in an asynchronous measurement. + (+) Implement the weak function HAL_DTS_AsyncLowCallback() to get a callback when the temperature + go down the low threshold in an asynchronous measurement. + + [..] + The compilation flag USE_HAL_DTS_REGISTER_CALLBACKS, when set to 1, allows the user to configure dynamically + the driver callbacks. + + *** State *** + ============================================= + [..] + The driver permits to get in run time the status of the peripheral. + + (+) Use HAL_DTS_GetState() to get the state of the DTS. + + @endverbatim + ********************************************************************************************************************** + */ + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_DTS_MODULE_ENABLED + +/** @defgroup DTS DTS + * @brief DTS HAL module driver + * @{ + */ + +/* Private typedef ---------------------------------------------------------------------------------------------------*/ +/* Private define ----------------------------------------------------------------------------------------------------*/ +/** @addtogroup DTS_Private_Constants + * @{ + */ + +/* @brief Delay for DTS startup time + * @note Delay required to get ready for DTS Block. + * @note Unit: ms + */ +#define DTS_DELAY_STARTUP (1UL) + +/* @brief DTS measure ready flag time out value. + * @note Maximal measurement time is when LSE is selected as ref_clock and + * maximal sampling time is used, taking calibration into account this + * is equivalent to ~620 us. Use 5 ms as arbitrary timeout + * @note Unit: ms + */ +#define TS_TIMEOUT_MS (5UL) + +/* @brief DTS factory temperatures + * @note Unit: degree Celsius + */ +#define DTS_FACTORY_TEMPERATURE1 (30UL) +#define DTS_FACTORY_TEMPERATURE2 (130UL) + +/** + * @} + */ + +/* Private macro -----------------------------------------------------------------------------------------------------*/ +/* Private variables -------------------------------------------------------------------------------------------------*/ +/* Private function prototypes ---------------------------------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @defgroup DTS_Exported_Functions DTS Exported Functions + * @{ + */ + +/** @defgroup DTS_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and de-initialization functions. + * +@verbatim + ======================================================================================================================= + ##### Initialization and de-initialization functions ##### + ======================================================================================================================= + [..] This section provides functions to initialize and de-initialize DTS + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DTS according to the specified + * parameters in the DTS_InitTypeDef and initialize the associated handle. + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_Init(DTS_HandleTypeDef *hdts) +{ + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DTS_ALL_INSTANCE(hdts->Instance)); + assert_param(IS_DTS_QUICKMEAS(hdts->Init.QuickMeasure)); + assert_param(IS_DTS_REFCLK(hdts->Init.RefClock)); + assert_param(IS_DTS_TRIGGERINPUT(hdts->Init.TriggerInput)); + assert_param(IS_DTS_SAMPLINGTIME(hdts->Init.SamplingTime)); + assert_param(IS_DTS_THRESHOLD(hdts->Init.HighThreshold)); + assert_param(IS_DTS_THRESHOLD(hdts->Init.LowThreshold)); + + if (hdts->State == HAL_DTS_STATE_RESET) + { +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + /* Reset the DTS callback to the legacy weak callbacks */ + hdts->EndCallback = HAL_DTS_EndCallback; /* End measure Callback */ + hdts->LowCallback = HAL_DTS_LowCallback; /* low threshold Callback */ + hdts->HighCallback = HAL_DTS_HighCallback; /* high threshold Callback */ + hdts->AsyncEndCallback = HAL_DTS_AsyncEndCallback; /* Asynchronous end of measure Callback */ + hdts->AsyncLowCallback = HAL_DTS_AsyncLowCallback; /* Asynchronous low threshold Callback */ + hdts->AsyncHighCallback = HAL_DTS_AsyncHighCallback; /* Asynchronous high threshold Callback */ + + if (hdts->MspInitCallback == NULL) + { + hdts->MspInitCallback = HAL_DTS_MspInit; + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + hdts->MspInitCallback(hdts); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_DTS_MspInit(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Change the DTS state */ + hdts->State = HAL_DTS_STATE_BUSY; + + /* Check ramp coefficient */ + if (hdts->Instance->RAMPVALR == 0UL) + { + return HAL_ERROR; + } + + /* Check factory calibration temperature */ + if (hdts->Instance->T0VALR1 == 0UL) + { + return HAL_ERROR; + } + + /* Check Quick Measure option is enabled or disabled */ + if (hdts->Init.QuickMeasure == DTS_QUICKMEAS_DISABLE) + { + /* Check Reference clock selection */ + if (hdts->Init.RefClock == DTS_REFCLKSEL_PCLK) + { + assert_param(IS_DTS_DIVIDER_RATIO_NUMBER(hdts->Init.Divider)); + } + /* Quick measurement mode disabled */ + CLEAR_BIT(hdts->Instance->CFGR1, DTS_CFGR1_Q_MEAS_OPT); + } + else + { + /* DTS_QUICKMEAS_ENABLE shall be used only when the LSE clock is + selected as reference clock */ + if (hdts->Init.RefClock != DTS_REFCLKSEL_LSE) + { + return HAL_ERROR; + } + + /* Quick measurement mode enabled - no calibration needed */ + SET_BIT(hdts->Instance->CFGR1, DTS_CFGR1_Q_MEAS_OPT); + } + + /* set the DTS clk source */ + if (hdts->Init.RefClock == DTS_REFCLKSEL_LSE) + { + SET_BIT(hdts->Instance->CFGR1, DTS_CFGR1_REFCLK_SEL); + } + else + { + CLEAR_BIT(hdts->Instance->CFGR1, DTS_CFGR1_REFCLK_SEL); + } + + MODIFY_REG(hdts->Instance->CFGR1, DTS_CFGR1_HSREF_CLK_DIV, (hdts->Init.Divider << DTS_CFGR1_HSREF_CLK_DIV_Pos)); + MODIFY_REG(hdts->Instance->CFGR1, DTS_CFGR1_TS1_SMP_TIME, hdts->Init.SamplingTime); + MODIFY_REG(hdts->Instance->CFGR1, DTS_CFGR1_TS1_INTRIG_SEL, hdts->Init.TriggerInput); + MODIFY_REG(hdts->Instance->ITR1, DTS_ITR1_TS1_HITTHD, (hdts->Init.HighThreshold << DTS_ITR1_TS1_HITTHD_Pos)); + MODIFY_REG(hdts->Instance->ITR1, DTS_ITR1_TS1_LITTHD, hdts->Init.LowThreshold); + + /* Change the DTS state */ + hdts->State = HAL_DTS_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DTS peripheral. + * @note Deinitialization cannot be performed if the DTS configuration is locked. + * To unlock the configuration, perform a system reset. + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_DeInit(DTS_HandleTypeDef *hdts) +{ + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_DTS_ALL_INSTANCE(hdts->Instance)); + + /* Set DTS_CFGR register to reset value */ + CLEAR_REG(hdts->Instance->CFGR1); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + if (hdts->MspDeInitCallback == NULL) + { + hdts->MspDeInitCallback = HAL_DTS_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hdts->MspDeInitCallback(hdts); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_DTS_MspDeInit(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + + hdts->State = HAL_DTS_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initialize the DTS MSP. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_MspInit(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the DTS MSP. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_MspDeInit(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a user DTS callback to be used instead of the weak predefined callback. + * @param hdts DTS handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_DTS_MEAS_COMPLETE_CB_ID measure complete callback ID. + * @arg @ref HAL_DTS_ASYNC_MEAS_COMPLETE_CB_ID asynchronous measure complete callback ID. + * @arg @ref HAL_DTS_LOW_THRESHOLD_CB_ID low threshold detection callback ID. + * @arg @ref HAL_DTS_ASYNC_LOW_THRESHOLD_CB_ID asynchronous low threshold detection callback ID. + * @arg @ref HAL_DTS_HIGH_THRESHOLD_CB_ID high threshold detection callback ID. + * @arg @ref HAL_DTS_ASYNC_HIGH_THRESHOLD_CB_ID asynchronous high threshold detection callback ID. + * @arg @ref HAL_DTS_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DTS_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DTS_RegisterCallback(DTS_HandleTypeDef *hdts, + HAL_DTS_CallbackIDTypeDef CallbackID, + pDTS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pCallback == NULL) + { + /* Update status */ + status = HAL_ERROR; + } + else + { + if (hdts->State == HAL_DTS_STATE_READY) + { + switch (CallbackID) + { + case HAL_DTS_MEAS_COMPLETE_CB_ID : + hdts->EndCallback = pCallback; + break; + case HAL_DTS_ASYNC_MEAS_COMPLETE_CB_ID : + hdts->AsyncEndCallback = pCallback; + break; + case HAL_DTS_LOW_THRESHOLD_CB_ID : + hdts->LowCallback = pCallback; + break; + case HAL_DTS_ASYNC_LOW_THRESHOLD_CB_ID : + hdts->AsyncLowCallback = pCallback; + break; + case HAL_DTS_HIGH_THRESHOLD_CB_ID : + hdts->HighCallback = pCallback; + break; + case HAL_DTS_ASYNC_HIGH_THRESHOLD_CB_ID : + hdts->AsyncHighCallback = pCallback; + break; + case HAL_DTS_MSPINIT_CB_ID : + hdts->MspInitCallback = pCallback; + break; + case HAL_DTS_MSPDEINIT_CB_ID : + hdts->MspDeInitCallback = pCallback; + break; + default : + /* Update status */ + status = HAL_ERROR; + break; + } + } + else if (hdts->State == HAL_DTS_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DTS_MSPINIT_CB_ID : + hdts->MspInitCallback = pCallback; + break; + case HAL_DTS_MSPDEINIT_CB_ID : + hdts->MspDeInitCallback = pCallback; + break; + default : + /* Update status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Unregister a user DTS callback. + * DTS callback is redirected to the weak predefined callback. + * @param hdts DTS handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_DTS_MEAS_COMPLETE_CB_ID measure complete callback ID. + * @arg @ref HAL_DTS_ASYNC_MEAS_COMPLETE_CB_ID asynchronous measure complete callback ID. + * @arg @ref HAL_DTS_LOW_THRESHOLD_CB_ID low threshold detection callback ID. + * @arg @ref HAL_DTS_ASYNC_LOW_THRESHOLD_CB_ID asynchronous low threshold detection callback ID. + * @arg @ref HAL_DTS_HIGH_THRESHOLD_CB_ID high threshold detection callback ID. + * @arg @ref HAL_DTS_ASYNC_HIGH_THRESHOLD_CB_ID asynchronous high threshold detection callback ID. + * @arg @ref HAL_DTS_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DTS_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DTS_UnRegisterCallback(DTS_HandleTypeDef *hdts, + HAL_DTS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hdts->State == HAL_DTS_STATE_READY) + { + switch (CallbackID) + { + case HAL_DTS_MEAS_COMPLETE_CB_ID : + hdts->EndCallback = HAL_DTS_EndCallback; + break; + case HAL_DTS_ASYNC_MEAS_COMPLETE_CB_ID : + hdts->AsyncEndCallback = HAL_DTS_AsyncEndCallback; + break; + case HAL_DTS_LOW_THRESHOLD_CB_ID : + hdts->LowCallback = HAL_DTS_LowCallback; + break; + case HAL_DTS_ASYNC_LOW_THRESHOLD_CB_ID : + hdts->AsyncLowCallback = HAL_DTS_AsyncLowCallback; + break; + case HAL_DTS_HIGH_THRESHOLD_CB_ID : + hdts->HighCallback = HAL_DTS_HighCallback; + break; + case HAL_DTS_ASYNC_HIGH_THRESHOLD_CB_ID : + hdts->AsyncHighCallback = HAL_DTS_AsyncHighCallback; + break; + case HAL_DTS_MSPINIT_CB_ID : + hdts->MspInitCallback = HAL_DTS_MspInit; + break; + case HAL_DTS_MSPDEINIT_CB_ID : + hdts->MspDeInitCallback = HAL_DTS_MspDeInit; + break; + default : + /* Update status */ + status = HAL_ERROR; + break; + } + } + else if (hdts->State == HAL_DTS_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DTS_MSPINIT_CB_ID : + hdts->MspInitCallback = HAL_DTS_MspInit; + break; + case HAL_DTS_MSPDEINIT_CB_ID : + hdts->MspDeInitCallback = HAL_DTS_MspDeInit; + break; + default : + /* Update status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update status */ + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DTS_Exported_Functions_Group2 Start-Stop operation functions + * @brief Start-Stop operation functions. + * +@verbatim + ======================================================================================================================= + ##### DTS Start Stop operation functions ##### + ======================================================================================================================= + [..] This section provides functions allowing to: + (+) Start a DTS Sensor without interrupt. + (+) Stop a DTS Sensor without interrupt. + (+) Start a DTS Sensor with interrupt generation. + (+) Stop a DTS Sensor with interrupt generation. + +@endverbatim + * @{ + */ + +/** + * @brief Start the DTS sensor. + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_Start(DTS_HandleTypeDef *hdts) +{ + uint32_t Ref_Time; + + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + if (hdts->State == HAL_DTS_STATE_READY) + { + hdts->State = HAL_DTS_STATE_BUSY; + + /* Enable DTS sensor */ + __HAL_DTS_ENABLE(hdts); + + /* Get Start Tick*/ + Ref_Time = HAL_GetTick(); + + /* Wait till TS1_RDY flag is set */ + while (__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_RDY) == RESET) + { + if ((HAL_GetTick() - Ref_Time) > DTS_DELAY_STARTUP) + { + return HAL_TIMEOUT; + } + } + + if (__HAL_DTS_GET_TRIGGER(hdts) == DTS_TRIGGER_HW_NONE) + { + /* Start continuous measures */ + SET_BIT(hdts->Instance->CFGR1, DTS_CFGR1_TS1_START); + + /* Ensure start is taken into account */ + HAL_Delay(TS_TIMEOUT_MS); + } + + hdts->State = HAL_DTS_STATE_READY; + } + else + { + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Stop the DTS Sensor. + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_Stop(DTS_HandleTypeDef *hdts) +{ + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + if (hdts->State == HAL_DTS_STATE_READY) + { + hdts->State = HAL_DTS_STATE_BUSY; + + if (__HAL_DTS_GET_TRIGGER(hdts) == DTS_TRIGGER_HW_NONE) + { + CLEAR_BIT(hdts->Instance->CFGR1, DTS_CFGR1_TS1_START); + } + + /* Disable the selected DTS sensor */ + __HAL_DTS_DISABLE(hdts); + + hdts->State = HAL_DTS_STATE_READY; + } + else + { + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Enable the interrupt(s) and start the DTS sensor + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_Start_IT(DTS_HandleTypeDef *hdts) +{ + uint32_t Ref_Time; + + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + if (hdts->State == HAL_DTS_STATE_READY) + { + hdts->State = HAL_DTS_STATE_BUSY; + + /* On Asynchronous mode enable the asynchronous IT */ + if (hdts->Init.RefClock == DTS_REFCLKSEL_LSE) + { + __HAL_DTS_ENABLE_IT(hdts, DTS_IT_TS1_AITE | DTS_IT_TS1_AITL | DTS_IT_TS1_AITH); + } + else + { + /* Enable the IT(s) */ + __HAL_DTS_ENABLE_IT(hdts, DTS_IT_TS1_ITE | DTS_IT_TS1_ITL | DTS_IT_TS1_ITH); + } + + /* Enable the selected DTS sensor */ + __HAL_DTS_ENABLE(hdts); + + /* Get Start Tick*/ + Ref_Time = HAL_GetTick(); + + /* Wait till TS1_RDY flag is set */ + while (__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_RDY) == RESET) + { + if ((HAL_GetTick() - Ref_Time) > DTS_DELAY_STARTUP) + { + return HAL_TIMEOUT; + } + } + + if (__HAL_DTS_GET_TRIGGER(hdts) == DTS_TRIGGER_HW_NONE) + { + /* Start continuous measures */ + SET_BIT(hdts->Instance->CFGR1, DTS_CFGR1_TS1_START); + + /* Ensure start is taken into account */ + HAL_Delay(TS_TIMEOUT_MS); + } + + hdts->State = HAL_DTS_STATE_READY; + } + else + { + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Disable the interrupt(s) and stop the DTS sensor. + * @param hdts DTS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_Stop_IT(DTS_HandleTypeDef *hdts) +{ + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_ERROR; + } + + if (hdts->State == HAL_DTS_STATE_READY) + { + hdts->State = HAL_DTS_STATE_BUSY; + + /* On Asynchronous mode disable the asynchronous IT */ + if (hdts->Init.RefClock == DTS_REFCLKSEL_LSE) + { + __HAL_DTS_DISABLE_IT(hdts, DTS_IT_TS1_AITE | DTS_IT_TS1_AITL | DTS_IT_TS1_AITH); + } + else + { + /* Disable the IT(s) */ + __HAL_DTS_DISABLE_IT(hdts, DTS_IT_TS1_ITE | DTS_IT_TS1_ITL | DTS_IT_TS1_ITH); + } + + if (__HAL_DTS_GET_TRIGGER(hdts) == DTS_TRIGGER_HW_NONE) + { + CLEAR_BIT(hdts->Instance->CFGR1, DTS_CFGR1_TS1_START); + } + + /* Disable the selected DTS sensor */ + __HAL_DTS_DISABLE(hdts); + + hdts->State = HAL_DTS_STATE_READY; + } + else + { + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Get temperature from DTS + * @param hdts DTS handle + * @param Temperature Temperature in deg C + * @note This function retrieves latest available measure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DTS_GetTemperature(DTS_HandleTypeDef *hdts, int32_t *Temperature) +{ + uint32_t freq_meas; + uint32_t samples; + uint32_t t0_temp; + uint32_t t0_freq; + uint32_t ramp_coeff; + + if (hdts->State == HAL_DTS_STATE_READY) + { + hdts->State = HAL_DTS_STATE_BUSY; + + /* Get the total number of samples */ + samples = (hdts->Instance->DR & DTS_DR_TS1_MFREQ); + + if ((hdts->Init.SamplingTime == 0UL) || (samples == 0UL)) + { + hdts->State = HAL_DTS_STATE_READY; + return HAL_ERROR; + } + + if ((hdts->Init.RefClock) == DTS_REFCLKSEL_LSE) + { + /* Measured frequency On Hz */ + freq_meas = (LSE_VALUE * samples) / (hdts->Init.SamplingTime >> DTS_CFGR1_TS1_SMP_TIME_Pos); + } + else + { + /* Measured frequency On Hz */ + freq_meas = (HAL_RCC_GetPCLK1Freq() * (hdts->Init.SamplingTime >> DTS_CFGR1_TS1_SMP_TIME_Pos)) / samples; + } + + /* Read factory settings */ + t0_temp = hdts->Instance->T0VALR1 >> DTS_T0VALR1_TS1_T0_Pos; + + if (t0_temp == 0UL) + { + t0_temp = DTS_FACTORY_TEMPERATURE1; /* 30 deg C */ + } + else if (t0_temp == 1UL) + { + t0_temp = DTS_FACTORY_TEMPERATURE2; /* 130 deg C */ + } + else + { + hdts->State = HAL_DTS_STATE_READY; + return HAL_ERROR; + } + + t0_freq = (hdts->Instance->T0VALR1 & DTS_T0VALR1_TS1_FMT0) * 100UL; /* Hz */ + + ramp_coeff = hdts->Instance->RAMPVALR & DTS_RAMPVALR_TS1_RAMP_COEFF; /* deg C/Hz */ + + if (ramp_coeff == 0UL) + { + hdts->State = HAL_DTS_STATE_READY; + return HAL_ERROR; + } + + /* Figure out the temperature deg C */ + *Temperature = (int32_t)t0_temp + (((int32_t)freq_meas - (int32_t)t0_freq) / (int32_t)ramp_coeff); + + hdts->State = HAL_DTS_STATE_READY; + } + else + { + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief DTS sensor IRQ Handler. + * @param hdts DTS handle + * @retval None + */ +void HAL_DTS_IRQHandler(DTS_HandleTypeDef *hdts) +{ + /* Check end of measure Asynchronous IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_AITE)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_AITE); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->AsyncEndCallback(hdts); +#else + HAL_DTS_AsyncEndCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Check low threshold Asynchronous IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_AITL)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_AITL); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->AsyncLowCallback(hdts); +#else + HAL_DTS_AsyncLowCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Check high threshold Asynchronous IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_AITH)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_AITH); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->AsyncHighCallback(hdts); +#else + HAL_DTS_AsyncHighCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Check end of measure IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_ITE)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_ITE); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->EndCallback(hdts); +#else + HAL_DTS_EndCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Check low threshold IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_ITL)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_ITL); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->LowCallback(hdts); +#else + HAL_DTS_LowCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } + + /* Check high threshold IT */ + if ((__HAL_DTS_GET_FLAG(hdts, DTS_FLAG_TS1_ITH)) != RESET) + { + __HAL_DTS_CLEAR_FLAG(hdts, DTS_FLAG_TS1_ITH); + +#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1U) + hdts->HighCallback(hdts); +#else + HAL_DTS_HighCallback(hdts); +#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DTS Sensor End measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_EndCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_EndCallback should be implemented in the user file + */ +} + +/** + * @brief DTS Sensor low threshold measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_LowCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_LowCallback should be implemented in the user file + */ +} + +/** + * @brief DTS Sensor high threshold measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_HighCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_HighCallback should be implemented in the user file + */ +} + +/** + * @brief DTS Sensor asynchronous end measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_AsyncEndCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_AsyncEndCallback should be implemented in the user file + */ +} + +/** + * @brief DTS Sensor asynchronous low threshold measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_AsyncLowCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_AsyncLowCallback should be implemented in the user file + */ +} + +/** + * @brief DTS Sensor asynchronous high threshold measure callback. + * @param hdts DTS handle + * @retval None + */ +__weak void HAL_DTS_AsyncHighCallback(DTS_HandleTypeDef *hdts) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdts); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DTS_AsyncHighCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DTS_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ======================================================================================================================= + ##### Peripheral State functions ##### + ======================================================================================================================= + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the DTS handle state. + * @param hdts DTS handle + * @retval HAL state + */ +HAL_DTS_StateTypeDef HAL_DTS_GetState(const DTS_HandleTypeDef *hdts) +{ + /* Check the DTS handle allocation */ + if (hdts == NULL) + { + return HAL_DTS_STATE_RESET; + } + + /* Return DTS handle state */ + return hdts->State; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DTS_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth.c new file mode 100644 index 000000000..856a1f889 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth.c @@ -0,0 +1,3341 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_eth.c + * @author MCD Application Team + * @brief ETH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Ethernet (ETH) peripheral: + * + Initialization and deinitialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The ETH HAL driver can be used as follows: + + (#)Declare a ETH_HandleTypeDef handle structure, for example: + ETH_HandleTypeDef heth; + + (#)Fill parameters of Init structure in heth handle + + (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) + + (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: + (##) Enable the Ethernet interface clock using + (+++) __HAL_RCC_ETH1MAC_CLK_ENABLE() + (+++) __HAL_RCC_ETH1TX_CLK_ENABLE() + (+++) __HAL_RCC_ETH1RX_CLK_ENABLE() + + (##) Initialize the related GPIO clocks + (##) Configure Ethernet pinout + (##) Configure Ethernet NVIC interrupt (in Interrupt mode) + + (#) Ethernet data reception is asynchronous, so call the following API + to start the listening mode: + (##) HAL_ETH_Start(): + This API starts the MAC and DMA transmission and reception process, + without enabling end of transfer interrupts, in this mode user + has to poll for data reception by calling HAL_ETH_ReadData() + (##) HAL_ETH_Start_IT(): + This API starts the MAC and DMA transmission and reception process, + end of transfer interrupts are enabled in this mode, + HAL_ETH_RxCpltCallback() will be executed when an Ethernet packet is received + + (#) When data is received user can call the following API to get received data: + (##) HAL_ETH_ReadData(): Read a received packet + + (#) For transmission path, two APIs are available: + (##) HAL_ETH_Transmit(): Transmit an ETH frame in blocking mode + (##) HAL_ETH_Transmit_IT(): Transmit an ETH frame in interrupt mode, + HAL_ETH_TxCpltCallback() will be executed when end of transfer occur + + (#) Communication with an external PHY device: + (##) HAL_ETH_ReadPHYRegister(): Read a register from an external PHY + (##) HAL_ETH_WritePHYRegister(): Write data to an external RHY register + + (#) Configure the Ethernet MAC after ETH peripheral initialization + (##) HAL_ETH_GetMACConfig(): Get MAC actual configuration into ETH_MACConfigTypeDef + (##) HAL_ETH_SetMACConfig(): Set MAC configuration based on ETH_MACConfigTypeDef + + (#) Configure the Ethernet DMA after ETH peripheral initialization + (##) HAL_ETH_GetDMAConfig(): Get DMA actual configuration into ETH_DMAConfigTypeDef + (##) HAL_ETH_SetDMAConfig(): Set DMA configuration based on ETH_DMAConfigTypeDef + + (#) Configure the Ethernet PTP after ETH peripheral initialization + (##) Define HAL_ETH_USE_PTP to use PTP APIs. + (##) HAL_ETH_PTP_GetConfig(): Get PTP actual configuration into ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_SetConfig(): Set PTP configuration based on ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_GetTime(): Get Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_SetTime(): Set Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_AddTimeOffset(): Add Seconds and Nanoseconds offset for the Ethernet PTP registers + (##) HAL_ETH_PTP_InsertTxTimestamp(): Insert Timestamp in transmission + (##) HAL_ETH_PTP_GetTxTimestamp(): Get transmission timestamp + (##) HAL_ETH_PTP_GetRxTimestamp(): Get reception timestamp + + -@- The ARP offload feature is not supported in this driver. + + -@- The PTP offload feature is not supported in this driver. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_ETH_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_ETH_RegisterCallback() to register an interrupt callback. + + Function HAL_ETH_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks RxAllocateCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxPtpCallback(). + + Use function HAL_ETH_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_ETH_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + For specific callbacks RxAllocateCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxPtpCallback(). + + By default, after the HAL_ETH_Init and when the state is HAL_ETH_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_ETH_TxCpltCallback(), HAL_ETH_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_ETH_Init/ HAL_ETH_DeInit only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_ETH_Init/ HAL_ETH_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_ETH_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_ETH_STATE_READY or HAL_ETH_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_ETH_RegisterCallback() before calling HAL_ETH_DeInit + or HAL_ETH_Init function. + + When The compilation define USE_HAL_ETH_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined(ETH) + +/** @defgroup ETH ETH + * @brief ETH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup ETH_Private_Constants ETH Private Constants + * @{ + */ +#define ETH_MACCR_MASK 0xFFFB7F7CU +#define ETH_MACECR_MASK 0x3F077FFFU +#define ETH_MACPFR_MASK 0x800007FFU +#define ETH_MACWTR_MASK 0x0000010FU +#define ETH_MACTFCR_MASK 0xFFFF00F2U +#define ETH_MACRFCR_MASK 0x00000003U +#define ETH_MTLTQOMR_MASK 0x00000072U +#define ETH_MTLRQOMR_MASK 0x0000007BU + +#define ETH_DMAMR_MASK 0x00007802U +#define ETH_DMASBMR_MASK 0x0000D001U +#define ETH_DMACCR_MASK 0x00013FFFU +#define ETH_DMACTCR_MASK 0x003F1010U +#define ETH_DMACRCR_MASK 0x803F0000U +#define ETH_MACPCSR_MASK (ETH_MACPCSR_PWRDWN | ETH_MACPCSR_RWKPKTEN | \ + ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | \ + ETH_MACPCSR_RWKPFE) + +/* Timeout values */ +#define ETH_DMARXNDESCWBF_ERRORS_MASK ((uint32_t)(ETH_DMARXNDESCWBF_DE | ETH_DMARXNDESCWBF_RE | \ + ETH_DMARXNDESCWBF_OE | ETH_DMARXNDESCWBF_RWT |\ + ETH_DMARXNDESCWBF_GP | ETH_DMARXNDESCWBF_CE)) + +#define ETH_MACTSCR_MASK 0x0087FF2FU + +#define ETH_MACSTSUR_VALUE 0xFFFFFFFFU +#define ETH_MACSTNUR_VALUE 0xBB9ACA00U +#define ETH_SEGMENT_SIZE_DEFAULT 0x218U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ETH_Private_Macros ETH Private Macros + * @{ + */ +/* Helper macros for TX descriptor handling */ +#define INCR_TX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_TX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_TX_DESC_CNT);}\ + } while (0) + +/* Helper macros for RX descriptor handling */ +#define INCR_RX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_RX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_RX_DESC_CNT);}\ + } while (0) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ETH_Private_Functions ETH Private Functions + * @{ + */ +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, const ETH_MACConfigTypeDef *macconf); +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, const ETH_DMAConfigTypeDef *dmaconf); +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth); +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth); +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth); +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, const ETH_TxPacketConfigTypeDef *pTxConfig, + uint32_t ItMode); +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup ETH_Exported_Functions ETH Exported Functions + * @{ + */ + +/** @defgroup ETH_Exported_Functions_Group1 Initialization and deinitialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the ETH peripheral: + + (+) User must Implement HAL_ETH_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO and NVIC ). + + (+) Call the function HAL_ETH_Init() to configure the selected device with + the selected configuration: + (++) MAC address + (++) Media interface (MII or RMII) + (++) Rx DMA Descriptors Tab + (++) Tx DMA Descriptors Tab + (++) Length of Rx Buffers + + (+) Call the function HAL_ETH_DeInit() to restore the default configuration + of the selected ETH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the Ethernet peripheral registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) +{ + uint32_t tickstart; + + if (heth == NULL) + { + return HAL_ERROR; + } + if (heth->gState == HAL_ETH_STATE_RESET) + { + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + ETH_InitCallbacksToDefault(heth); + + if (heth->MspInitCallback == NULL) + { + heth->MspInitCallback = HAL_ETH_MspInit; + } + + /* Init the low level hardware */ + heth->MspInitCallback(heth); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + } + + __HAL_RCC_SBS_CLK_ENABLE(); + + if (heth->Init.MediaInterface == HAL_ETH_MII_MODE) + { + HAL_SBS_ConfigEthernetPHY(SBS_ETHERNET_PHY_GMII_OR_MII); + } + else + { + HAL_SBS_ConfigEthernetPHY(SBS_ETHERNET_PHY_RMII); + } + + /* Dummy read to sync with ETH */ + (void)SBS->PMCR; + + /* Ethernet Software reset */ + /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ + /* After reset all the registers holds their respective reset values */ + SET_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for software reset */ + while (READ_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_SWRESET_TIMEOUT)) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_TIMEOUT; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + } + + /*------------------ MDIO CSR Clock Range Configuration --------------------*/ + HAL_ETH_SetMDIOClockRange(heth); + + /*------------------ MAC LPI 1US Tic Counter Configuration --------------------*/ + WRITE_REG(heth->Instance->MAC1USTCR, (((uint32_t)HAL_RCC_GetHCLKFreq() / ETH_MAC_US_TICK) - 1U)); + + /*------------------ MAC, MTL and DMA default Configuration ----------------*/ + ETH_MACDMAConfig(heth); + + /* SET DSL to 64 bit */ + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_DSL, ETH_DMACCR_DSL_64BIT); + + /* Set Receive Buffers Length (must be a multiple of 4) */ + if ((heth->Init.RxBuffLen % 0x4U) != 0x0U) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_PARAM; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + else + { + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_RBSZ, ((heth->Init.RxBuffLen) << 1)); + } + + /*------------------ DMA Tx Descriptors Configuration ----------------------*/ + ETH_DMATxDescListInit(heth); + + /*------------------ DMA Rx Descriptors Configuration ----------------------*/ + ETH_DMARxDescListInit(heth); + + /*--------------------- ETHERNET MAC Address Configuration ------------------*/ + /* Set MAC addr bits 32 to 47 */ + heth->Instance->MACA0HR = (((uint32_t)(heth->Init.MACAddr[5]) << 8) | (uint32_t)heth->Init.MACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + heth->Instance->MACA0LR = (((uint32_t)(heth->Init.MACAddr[3]) << 24) | ((uint32_t)(heth->Init.MACAddr[2]) << 16) | + ((uint32_t)(heth->Init.MACAddr[1]) << 8) | (uint32_t)heth->Init.MACAddr[0]); + + /* Disable Rx MMC Interrupts */ + SET_BIT(heth->Instance->MMCRIMR, ETH_MMCRIMR_RXLPITRCIM | ETH_MMCRIMR_RXLPIUSCIM | \ + ETH_MMCRIMR_RXUCGPIM | ETH_MMCRIMR_RXALGNERPIM | ETH_MMCRIMR_RXCRCERPIM); + + /* Disable Tx MMC Interrupts */ + SET_BIT(heth->Instance->MMCTIMR, ETH_MMCTIMR_TXLPITRCIM | ETH_MMCTIMR_TXLPIUSCIM | \ + ETH_MMCTIMR_TXGPKTIM | ETH_MMCTIMR_TXMCOLGPIM | ETH_MMCTIMR_TXSCOLGPIM); + + heth->ErrorCode = HAL_ETH_ERROR_NONE; + heth->gState = HAL_ETH_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the ETH peripheral. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) +{ + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + if (heth->MspDeInitCallback == NULL) + { + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + } + /* DeInit the low level hardware */ + heth->MspDeInitCallback(heth); +#else + + /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspDeInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + + /* Set ETH HAL state to Disabled */ + heth->gState = HAL_ETH_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ETH Callback + * To be used instead of the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, + pETH_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = pCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = pCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = pCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = pCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = pCallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = pCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an ETH Callback + * ETH callback is redirected to the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = HAL_ETH_ErrorCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = HAL_ETH_PMTCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = HAL_ETH_EEECallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group2 IO operation functions + * @brief ETH Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the ETH + data transfer. + +@endverbatim + * @{ + */ + +/** + * @brief Enables Ethernet MAC and DMA reception and transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* Set number of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + heth->gState = HAL_ETH_STATE_STARTED; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enables Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* save IT mode to ETH Handle */ + heth->RxDescList.ItMode = 1U; + + /* Set number of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Enable ETH DMA interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_ENABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + heth->gState = HAL_ETH_STATE_STARTED; + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t descindex; + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + + /* Disable interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_DISABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Clear IOC bit to all Rx descriptors */ + for (descindex = 0; descindex < (uint32_t)ETH_RX_DESC_CNT; descindex++) + { + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descindex]; + CLEAR_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCRF_IOC); + } + + heth->RxDescList.ItMode = 0U; + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in polling mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @param Timeout: timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig, uint32_t Timeout) +{ + uint32_t tickstart; + ETH_DMADescTypeDef *dmatxdesc; + + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 0) != HAL_ETH_ERROR_NONE) + { + /* Set the ETH error code */ + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + dmatxdesc = (ETH_DMADescTypeDef *)(&heth->TxDescList)->TxDesc[heth->TxDescList.CurTxDesc]; + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + tickstart = HAL_GetTick(); + + /* Wait for data to be transmitted or timeout occurred */ + while ((dmatxdesc->DESC3 & ETH_DMATXNDESCWBF_OWN) != (uint32_t)RESET) + { + if ((heth->Instance->DMACSR & ETH_DMACSR_FBE) != (uint32_t)RESET) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + heth->DMAErrorCode = heth->Instance->DMACSR; + /* Return function status */ + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + heth->ErrorCode |= HAL_ETH_ERROR_TIMEOUT; + /* Clear TX descriptor so that we can proceed */ + dmatxdesc->DESC3 = (ETH_DMATXNDESCWBF_FD | ETH_DMATXNDESCWBF_LD); + return HAL_ERROR; + } + } + } + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in interrupt mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig) +{ + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Save the packet pointer to release. */ + heth->TxDescList.CurrentPacketAddress = (uint32_t *)pTxConfig->pData; + + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 1) != HAL_ETH_ERROR_NONE) + { + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + return HAL_OK; + + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Read a received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pAppBuff: Pointer to an application buffer to receive the packet. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff) +{ + uint32_t descidx; + ETH_DMADescTypeDef *dmarxdesc; + uint32_t desccnt = 0U; + uint32_t desccntmax; + uint32_t bufflength; + uint8_t rxdataready = 0U; + + if (pAppBuff == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState != HAL_ETH_STATE_STARTED) + { + return HAL_ERROR; + } + + descidx = heth->RxDescList.RxDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccntmax = ETH_RX_DESC_CNT - heth->RxDescList.RxBuildDescCnt; + + /* Check if descriptor is not owned by DMA */ + while ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_OWN) == (uint32_t)RESET) && (desccnt < desccntmax) + && (rxdataready == 0U)) + { + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_CTXT) != (uint32_t)RESET) + { + /* Get timestamp high */ + heth->RxDescList.TimeStamp.TimeStampHigh = dmarxdesc->DESC1; + /* Get timestamp low */ + heth->RxDescList.TimeStamp.TimeStampLow = dmarxdesc->DESC0; + } + if ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) || (heth->RxDescList.pRxStart != NULL)) + { + /* Check if first descriptor */ + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) + { + heth->RxDescList.RxDescCnt = 0; + heth->RxDescList.RxDataLength = 0; + } + + /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */ + bufflength = READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_PL) - heth->RxDescList.RxDataLength; + + /* Check if last descriptor */ + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_LD) != (uint32_t)RESET) + { + /* Save Last descriptor index */ + heth->RxDescList.pRxLastRxDesc = dmarxdesc->DESC3; + + /* Packet ready */ + rxdataready = 1; + } + + /* Link data */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Link callback*/ + heth->rxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, bufflength); +#else + /* Link callback */ + HAL_ETH_RxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, (uint16_t) bufflength); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + heth->RxDescList.RxDescCnt++; + heth->RxDescList.RxDataLength += bufflength; + + /* Clear buffer pointer */ + dmarxdesc->BackupAddr0 = 0; + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccnt++; + } + + heth->RxDescList.RxBuildDescCnt += desccnt; + if ((heth->RxDescList.RxBuildDescCnt) != 0U) + { + /* Update Descriptors */ + ETH_UpdateDescriptor(heth); + } + + heth->RxDescList.RxDescIdx = descidx; + + if (rxdataready == 1U) + { + /* Return received packet */ + *pAppBuff = heth->RxDescList.pRxStart; + /* Reset first element */ + heth->RxDescList.pRxStart = NULL; + + return HAL_OK; + } + + /* Packet not ready */ + return HAL_ERROR; +} + +/** + * @brief This function gives back Rx Desc of the last received Packet + * to the DMA, so ETH DMA will be able to use these descriptors + * to receive next Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth) +{ + uint32_t descidx; + uint32_t tailidx; + uint32_t desccount; + ETH_DMADescTypeDef *dmarxdesc; + uint8_t *buff = NULL; + uint8_t allocStatus = 1U; + + descidx = heth->RxDescList.RxBuildDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount = heth->RxDescList.RxBuildDescCnt; + + while ((desccount > 0U) && (allocStatus != 0U)) + { + /* Check if a buffer's attached the descriptor */ + if (READ_REG(dmarxdesc->BackupAddr0) == 0U) + { + /* Get a new buffer. */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Allocate callback*/ + heth->rxAllocateCallback(&buff); +#else + /* Allocate callback */ + HAL_ETH_RxAllocateCallback(&buff); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + if (buff == NULL) + { + allocStatus = 0U; + } + else + { + WRITE_REG(dmarxdesc->BackupAddr0, (uint32_t)buff); + WRITE_REG(dmarxdesc->DESC0, (uint32_t)buff); + } + } + + if (allocStatus != 0U) + { + + if (heth->RxDescList.ItMode != 0U) + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V | ETH_DMARXNDESCRF_IOC); + } + else + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V); + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount--; + } + } + + if (heth->RxDescList.RxBuildDescCnt != desccount) + { + /* Set the tail pointer index */ + tailidx = (descidx + 1U) % ETH_RX_DESC_CNT; + + /* DMB instruction to avoid race condition */ + __DMB(); + + /* Set the Tail pointer address */ + WRITE_REG(heth->Instance->DMACRDTPR, ((uint32_t)(heth->Init.RxDesc + (tailidx)))); + + heth->RxDescList.RxBuildDescIdx = descidx; + heth->RxDescList.RxBuildDescCnt = desccount; + } +} + +/** + * @brief Register the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxAllocateCallback: pointer to function to alloc buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, + pETH_rxAllocateCallbackTypeDef rxAllocateCallback) +{ + if (rxAllocateCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to allocate buffer */ + heth->rxAllocateCallback = rxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Rx Allocate callback. + * @param buff: pointer to allocated buffer + * @retval None + */ +__weak void HAL_ETH_RxAllocateCallback(uint8_t **buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxAllocateCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Link callback. + * @param pStart: pointer to packet start + * @param pEnd: pointer to packet end + * @param buff: pointer to received data + * @param Length: received data length + * @retval None + */ +__weak void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(pStart); + UNUSED(pEnd); + UNUSED(buff); + UNUSED(Length); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxLinkCallback could be implemented in the user file + */ +} + +/** + * @brief Set the Rx link data function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxLinkCallback: pointer to function to link data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback) +{ + if (rxLinkCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to link data */ + heth->rxLinkCallback = rxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx link callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Get the error state of the last received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pErrorCode: pointer to uint32_t to hold the error code + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(const ETH_HandleTypeDef *heth, uint32_t *pErrorCode) +{ + /* Get error bits. */ + *pErrorCode = READ_BIT(heth->RxDescList.pRxLastRxDesc, ETH_DMARXNDESCWBF_ERRORS_MASK); + + return HAL_OK; +} + +/** + * @brief Set the Tx free function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txFreeCallback: pointer to function to release the packet + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback) +{ + if (txFreeCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to free transmmitted packet */ + heth->txFreeCallback = txFreeCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx free callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; + + return HAL_OK; +} + +/** + * @brief Tx Free callback. + * @param buff: pointer to buffer to free + * @retval None + */ +__weak void HAL_ETH_TxFreeCallback(uint32_t *buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxFreeCallback could be implemented in the user file + */ +} + +/** + * @brief Release transmitted Tx packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t numOfBuf = dmatxdesclist->BuffersInUse; + uint32_t idx = dmatxdesclist->releaseIndex; + uint8_t pktTxStatus = 1U; + uint8_t pktInUse; +#ifdef HAL_ETH_USE_PTP + ETH_TimeStampTypeDef *timestamp = &heth->TxTimestamp; +#endif /* HAL_ETH_USE_PTP */ + + /* Loop through buffers in use. */ + while ((numOfBuf != 0U) && (pktTxStatus != 0U)) + { + pktInUse = 1U; + numOfBuf--; + /* If no packet, just examine the next packet. */ + if (dmatxdesclist->PacketAddress[idx] == NULL) + { + /* No packet in use, skip to next. */ + INCR_TX_DESC_INDEX(idx, 1U); + pktInUse = 0U; + } + + if (pktInUse != 0U) + { + /* Determine if the packet has been transmitted. */ + if ((heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCRF_OWN) == 0U) + { +#ifdef HAL_ETH_USE_PTP + + /* Disable Ptp transmission */ + CLEAR_BIT(heth->Init.TxDesc[idx].DESC3, (0x40000000U)); + + if ((heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCWBF_LD) + && (heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCWBF_TTSS)) + { + /* Get timestamp low */ + timestamp->TimeStampLow = heth->Init.TxDesc[idx].DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->Init.TxDesc[idx].DESC1; + } + else + { + timestamp->TimeStampHigh = timestamp->TimeStampLow = UINT32_MAX; + } +#endif /* HAL_ETH_USE_PTP */ + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered callbacks*/ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + if (timestamp->TimeStampHigh != UINT32_MAX && timestamp->TimeStampLow != UINT32_MAX) + { + heth->txPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); + } +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + heth->txFreeCallback(dmatxdesclist->PacketAddress[idx]); +#else + /* Call callbacks */ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + if (timestamp->TimeStampHigh != UINT32_MAX && timestamp->TimeStampLow != UINT32_MAX) + { + HAL_ETH_TxPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); + } +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + HAL_ETH_TxFreeCallback(dmatxdesclist->PacketAddress[idx]); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the entry in the in-use array. */ + dmatxdesclist->PacketAddress[idx] = NULL; + + /* Update the transmit relesae index and number of buffers in use. */ + INCR_TX_DESC_INDEX(idx, 1U); + dmatxdesclist->BuffersInUse = numOfBuf; + dmatxdesclist->releaseIndex = idx; + } + else + { + /* Get out of the loop! */ + pktTxStatus = 0U; + } + } + } + return HAL_OK; +} + +#ifdef HAL_ETH_USE_PTP +/** + * @brief Set the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + uint32_t tmpTSCR; + ETH_TimeTypeDef time; + + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + + tmpTSCR = ptpconfig->Timestamp | + ((uint32_t)ptpconfig->TimestampUpdate << ETH_MACTSCR_TSUPDT_Pos) | + ((uint32_t)ptpconfig->TimestampAll << ETH_MACTSCR_TSENALL_Pos) | + ((uint32_t)ptpconfig->TimestampRolloverMode << ETH_MACTSCR_TSCTRLSSR_Pos) | + ((uint32_t)ptpconfig->TimestampV2 << ETH_MACTSCR_TSVER2ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEthernet << ETH_MACTSCR_TSIPENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv6 << ETH_MACTSCR_TSIPV6ENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv4 << ETH_MACTSCR_TSIPV4ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEvent << ETH_MACTSCR_TSEVNTENA_Pos) | + ((uint32_t)ptpconfig->TimestampMaster << ETH_MACTSCR_TSMSTRENA_Pos) | + ((uint32_t)ptpconfig->TimestampSnapshots << ETH_MACTSCR_SNAPTYPSEL_Pos) | + ((uint32_t)ptpconfig->TimestampFilter << ETH_MACTSCR_TSENMACADDR_Pos) | + ((uint32_t)ptpconfig->TimestampChecksumCorrection << ETH_MACTSCR_CSC_Pos) | + ((uint32_t)ptpconfig->TimestampStatusMode << ETH_MACTSCR_TXTSSTSM_Pos); + + /* Write to MACTSCR */ + MODIFY_REG(heth->Instance->MACTSCR, ETH_MACTSCR_MASK, tmpTSCR); + + /* Enable Timestamp */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + WRITE_REG(heth->Instance->MACSSIR, ptpconfig->TimestampSubsecondInc); + WRITE_REG(heth->Instance->MACTSAR, ptpconfig->TimestampAddend); + + /* Enable Timestamp */ + if (ptpconfig->TimestampAddendUpdate == ENABLE) + { + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSADDREG); + while ((heth->Instance->MACTSCR & ETH_MACTSCR_TSADDREG) != 0) + { + + } + } + + /* Ptp Init */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSINIT); + + /* Set PTP Configuration done */ + heth->IsPtpConfigured = HAL_ETH_PTP_CONFIGURED; + + /* Set Seconds */ + time.Seconds = heth->Instance->MACSTSR; + /* Set NanoSeconds */ + time.NanoSeconds = heth->Instance->MACSTNR; + + HAL_ETH_PTP_SetTime(heth, &time); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + ptpconfig->Timestamp = READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + ptpconfig->TimestampUpdate = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCFUPDT) >> ETH_MACTSCR_TSUPDT_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampAll = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENALL) >> ETH_MACTSCR_TSENALL_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampRolloverMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCTRLSSR) >> ETH_MACTSCR_TSCTRLSSR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampV2 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSVER2ENA) >> ETH_MACTSCR_TSVER2ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEthernet = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPENA) >> ETH_MACTSCR_TSIPENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv6 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV6ENA) >> ETH_MACTSCR_TSIPV6ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv4 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV4ENA) >> ETH_MACTSCR_TSIPV4ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEvent = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSEVNTENA) >> ETH_MACTSCR_TSEVNTENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampMaster = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSMSTRENA) >> ETH_MACTSCR_TSMSTRENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampSnapshots = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_SNAPTYPSEL) >> ETH_MACTSCR_SNAPTYPSEL_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampFilter = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENMACADDR) >> ETH_MACTSCR_TSENMACADDR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampChecksumCorrection = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_CSC) >> ETH_MACTSCR_CSC_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampStatusMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TXTSSTSM) >> ETH_MACTSCR_TXTSSTSM_Pos) > 0U) + ? ENABLE : DISABLE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param time: pointer to a ETH_TimeTypeDef structure that contains + * time to set + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Set Seconds */ + heth->Instance->MACSTSUR = time->Seconds; + + /* Set NanoSeconds */ + heth->Instance->MACSTNUR = time->NanoSeconds; + + /* the system time is updated */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSUPDT); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param time: pointer to a ETH_TimeTypeDef structure that contains + * time to get + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get Seconds */ + time->Seconds = heth->Instance->MACSTSR; + /* Get NanoSeconds */ + time->NanoSeconds = heth->Instance->MACSTNR; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Update time for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timeoffset: pointer to a ETH_PtpUpdateTypeDef structure that contains + * the time update information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, + ETH_TimeTypeDef *timeoffset) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + if (ptpoffsettype == HAL_ETH_PTP_NEGATIVE_UPDATE) + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = ETH_MACSTSUR_VALUE - timeoffset->Seconds + 1U; + + if (READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSCTRLSSR) == ETH_MACTSCR_TSCTRLSSR) + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTNUR_VALUE - timeoffset->NanoSeconds; + } + else + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTSUR_VALUE - timeoffset->NanoSeconds + 1U; + } + } + else + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = timeoffset->Seconds; + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = timeoffset->NanoSeconds; + } + + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSUPDT); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Insert Timestamp in transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Enable Time Stamp transmission */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_TTSE); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get transmission timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * transmission timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t idx = dmatxdesclist->releaseIndex; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[idx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = dmatxdesc->DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = dmatxdesc->DESC1; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get receive timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * receive timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = heth->RxDescList.TimeStamp.TimeStampLow; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->RxDescList.TimeStamp.TimeStampHigh; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Register the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txPtpCallback: Function to handle Ptp transmission + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback) +{ + if (txPtpCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + /* Set Function to handle Tx Ptp */ + heth->txPtpCallback = txPtpCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txPtpCallback = HAL_ETH_TxPtpCallback; + + return HAL_OK; +} + +/** + * @brief Tx Ptp callback. + * @param buff: pointer to application buffer + * @param timestamp: pointer to ETH_TimeStampTypeDef structure that contains + * transmission timestamp + * @retval None + */ +__weak void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxPtpCallback could be implemented in the user file + */ +} +#endif /* HAL_ETH_USE_PTP */ + +/** + * @brief This function handles ETH interrupt request. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) +{ + uint32_t mac_flag = READ_REG(heth->Instance->MACISR); + uint32_t dma_flag = READ_REG(heth->Instance->DMACSR); + uint32_t dma_itsource = READ_REG(heth->Instance->DMACIER); + uint32_t exti_flag = READ_REG(EXTI->PR2); + + /* Packet received */ + if (((dma_flag & ETH_DMACSR_RI) != 0U) && ((dma_itsource & ETH_DMACIER_RIE) != 0U)) + { + /* Clear the Eth DMA Rx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_RI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Receive complete callback*/ + heth->RxCpltCallback(heth); +#else + /* Receive complete callback */ + HAL_ETH_RxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* Packet transmitted */ + if (((dma_flag & ETH_DMACSR_TI) != 0U) && ((dma_itsource & ETH_DMACIER_TIE) != 0U)) + { + /* Clear the Eth DMA Tx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_TI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Transmit complete callback*/ + heth->TxCpltCallback(heth); +#else + /* Transfer complete callback */ + HAL_ETH_TxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* ETH DMA Error */ + if (((dma_flag & ETH_DMACSR_AIS) != 0U) && ((dma_itsource & ETH_DMACIER_AIE) != 0U)) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + /* if fatal bus error occurred */ + if ((dma_flag & ETH_DMACSR_FBE) != 0U) + { + /* Get DMA error code */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_FBE | ETH_DMACSR_TPS | ETH_DMACSR_RPS)); + + /* Disable all interrupts */ + __HAL_ETH_DMA_DISABLE_IT(heth, ETH_DMACIER_NIE | ETH_DMACIER_AIE); + + /* Set HAL state to ERROR */ + heth->gState = HAL_ETH_STATE_ERROR; + } + else + { + /* Get DMA error status */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + + /* Clear the interrupt summary flag */ + __HAL_ETH_DMA_CLEAR_IT(heth, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + } +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet DMA Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* ETH MAC Error IT */ + if (((mac_flag & ETH_MACIER_RXSTSIE) == ETH_MACIER_RXSTSIE) || \ + ((mac_flag & ETH_MACIER_TXSTSIE) == ETH_MACIER_TXSTSIE)) + { + heth->ErrorCode |= HAL_ETH_ERROR_MAC; + + /* Get MAC Rx Tx status and clear Status register pending bit */ + heth->MACErrorCode = READ_REG(heth->Instance->MACRXTXSR); + + heth->gState = HAL_ETH_STATE_ERROR; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + heth->MACErrorCode = (uint32_t)(0x0U); + } + + /* ETH PMT IT */ + if ((mac_flag & ETH_MAC_PMT_IT) != 0U) + { + /* Get MAC Wake-up source and clear the status register pending bit */ + heth->MACWakeUpEvent = READ_BIT(heth->Instance->MACPCSR, (ETH_MACPCSR_RWKPRCVD | ETH_MACPCSR_MGKPRCVD)); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered PMT callback*/ + heth->PMTCallback(heth); +#else + /* Ethernet PMT callback */ + HAL_ETH_PMTCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACWakeUpEvent = (uint32_t)(0x0U); + } + + /* ETH EEE IT */ + if ((mac_flag & ETH_MAC_LPI_IT) != 0U) + { + /* Get MAC LPI interrupt source and clear the status register pending bit */ + heth->MACLPIEvent = READ_BIT(heth->Instance->MACPCSR, 0x0000000FU); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered EEE callback*/ + heth->EEECallback(heth); +#else + /* Ethernet EEE callback */ + HAL_ETH_EEECallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACLPIEvent = (uint32_t)(0x0U); + } + + /* check ETH WAKEUP exti flag */ + if ((exti_flag & ETH_WAKEUP_EXTI_LINE) != 0U) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Tx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet transfer error callbacks + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet Power Management module IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_PMTCallback could be implemented in the user file + */ +} + +/** + * @brief Energy Efficient Etherent IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_EEECallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_EEECallback could be implemented in the user file + */ +} + +/** + * @brief ETH WAKEUP interrupt callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_WakeUpCallback could be implemented in the user file + */ +} + +/** + * @brief Read a PHY register + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param pRegValue: parameter to hold read value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t *pRegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the read mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_RD); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + /* Write the result value into the MDII Address register */ + WRITE_REG(heth->Instance->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + /* Get MACMIIDR value */ + WRITE_REG(*pRegValue, (uint16_t)heth->Instance->MACMDIODR); + + return HAL_OK; +} + +/** + * @brief Writes to a PHY register. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param RegValue: the value to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(const ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t RegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the write mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_WR); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + /* Give the value to the MII data register */ + WRITE_REG(ETH->MACMDIODR, (uint16_t)RegValue); + + /* Write the result value into the MII Address register */ + WRITE_REG(ETH->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions + * @brief ETH control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the ETH + peripheral. + +@endverbatim + * @{ + */ +/** + * @brief Get the configuration of the MAC and MTL subsystems. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that will hold + * the configuration of the MAC. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetMACConfig(const ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + /* Get MAC parameters */ + macconf->PreambleLength = READ_BIT(heth->Instance->MACCR, ETH_MACCR_PRELEN); + macconf->DeferralCheck = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DC) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->BackOffLimit = READ_BIT(heth->Instance->MACCR, ETH_MACCR_BL); + macconf->RetryTransmission = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DR) >> 8) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseDuringTransmit = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DCRS) >> 9) > 0U) + ? ENABLE : DISABLE; + macconf->ReceiveOwn = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DO) >> 10) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseBeforeTransmit = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_ECRSFD) >> 11) > 0U) ? ENABLE : DISABLE; + macconf->LoopbackMode = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_LM) >> 12) > 0U) ? ENABLE : DISABLE; + macconf->DuplexMode = READ_BIT(heth->Instance->MACCR, ETH_MACCR_DM); + macconf->Speed = READ_BIT(heth->Instance->MACCR, ETH_MACCR_FES); + macconf->JumboPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JE) >> 16) > 0U) ? ENABLE : DISABLE; + macconf->Jabber = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JD) >> 17) == 0U) ? ENABLE : DISABLE; + macconf->Watchdog = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_WD) >> 19) == 0U) ? ENABLE : DISABLE; + macconf->AutomaticPadCRCStrip = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_ACS) >> 20) > 0U) ? ENABLE : DISABLE; + macconf->CRCStripTypePacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_CST) >> 21) > 0U) ? ENABLE : DISABLE; + macconf->Support2KPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_S2KP) >> 22) > 0U) ? ENABLE : DISABLE; + macconf->GiantPacketSizeLimitControl = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_GPSLCE) >> 23) > 0U) ? ENABLE : DISABLE; + macconf->InterPacketGapVal = READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPG); + macconf->ChecksumOffload = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPC) >> 27) > 0U) ? ENABLE : DISABLE; + macconf->SourceAddrControl = READ_BIT(heth->Instance->MACCR, ETH_MACCR_SARC); + + macconf->GiantPacketSizeLimit = READ_BIT(heth->Instance->MACECR, ETH_MACECR_GPSL); + macconf->CRCCheckingRxPackets = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_DCRCC) >> 16) == 0U) ? ENABLE : DISABLE; + macconf->SlowProtocolDetect = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_SPEN) >> 17) > 0U) ? ENABLE : DISABLE; + macconf->UnicastSlowProtocolPacketDetect = ((READ_BIT(heth->Instance->MACECR, + ETH_MACECR_USP) >> 18) > 0U) ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGap = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPGEN) >> 24) > 0U) + ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGapVal = READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPG) >> 25; + + macconf->ProgrammableWatchdog = ((READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_PWE) >> 8) > 0U) ? ENABLE : DISABLE; + macconf->WatchdogTimeout = READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_WTO); + + macconf->TransmitFlowControl = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_TFE) >> 1) > 0U) ? ENABLE : DISABLE; + macconf->ZeroQuantaPause = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_DZPQ) >> 7) == 0U) ? ENABLE : DISABLE; + macconf->PauseLowThreshold = READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PLT); + macconf->PauseTime = (READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PT) >> 16); + macconf->ReceiveFlowControl = (READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_RFE) > 0U) ? ENABLE : DISABLE; + macconf->UnicastPausePacketDetect = ((READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_UP) >> 1) > 0U) + ? ENABLE : DISABLE; + + macconf->TransmitQueueMode = READ_BIT(heth->Instance->MTLTQOMR, (ETH_MTLTQOMR_TTC | ETH_MTLTQOMR_TSF)); + + macconf->ReceiveQueueMode = READ_BIT(heth->Instance->MTLRQOMR, (ETH_MTLRQOMR_RTC | ETH_MTLRQOMR_RSF)); + macconf->ForwardRxUndersizedGoodPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_FUP) >> 3) > 0U) ? ENABLE : DISABLE; + macconf->ForwardRxErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_FEP) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->DropTCPIPChecksumErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_DISTCPEF) >> 6) == 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Get the configuration of the DMA. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetDMAConfig(const ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + dmaconf->AddressAlignedBeats = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_AAL) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->BurstMode = READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_FB | ETH_DMASBMR_MB); + dmaconf->RebuildINCRxBurst = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_RB) >> 15) > 0U) ? ENABLE : DISABLE; + + dmaconf->DMAArbitration = READ_BIT(heth->Instance->DMAMR, (ETH_DMAMR_TXPR | ETH_DMAMR_PR | ETH_DMAMR_DA)); + + dmaconf->PBLx8Mode = ((READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_8PBL) >> 16) > 0U) ? ENABLE : DISABLE; + dmaconf->MaximumSegmentSize = READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_MSS); + + dmaconf->FlushRxPacket = ((READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPF) >> 31) > 0U) ? ENABLE : DISABLE; + dmaconf->RxDMABurstLength = READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPBL); + + dmaconf->SecondPacketOperate = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_OSP) >> 4) > 0U) ? ENABLE : DISABLE; + dmaconf->TCPSegmentation = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TSE) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->TxDMABurstLength = READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TPBL); + + return HAL_OK; +} + +/** + * @brief Set the MAC configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that contains + * the configuration of the MAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetMACConfig(heth, macconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Set the ETH DMA configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetDMAConfig(heth, dmaconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configures the Clock range of ETH MDIO interface. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth) +{ + uint32_t hclk; + uint32_t tmpreg; + + /* Get the ETHERNET MACMDIOAR value */ + tmpreg = (heth->Instance)->MACMDIOAR; + + /* Clear CSR Clock Range bits */ + tmpreg &= ~ETH_MACMDIOAR_CR; + + /* Get hclk frequency value */ + hclk = HAL_RCC_GetHCLKFreq(); + + /* Set CR bits depending on hclk value */ + if (hclk < 35000000U) + { + /* CSR Clock Range between 0-35 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV16; + } + else if (hclk < 60000000U) + { + /* CSR Clock Range between 35-60 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV26; + } + else if (hclk < 100000000U) + { + /* CSR Clock Range between 60-100 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV42; + } + else if (hclk < 150000000U) + { + /* CSR Clock Range between 100-150 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV62; + } + else if (hclk < 250000000U) + { + /* CSR Clock Range between 150-250 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV102; + } + else /* (hclk >= 250000000U) */ + { + /* CSR Clock >= 250 MHz */ + tmpreg |= (uint32_t)(ETH_MACMDIOAR_CR_DIV124); + } + + /* Configure the CSR Clock Range */ + (heth->Instance)->MACMDIOAR = (uint32_t)tmpreg; +} + +/** + * @brief Set the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that contains + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, const ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + uint32_t filterconfig; + + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + filterconfig = ((uint32_t)pFilterConfig->PromiscuousMode | + ((uint32_t)pFilterConfig->HashUnicast << 1) | + ((uint32_t)pFilterConfig->HashMulticast << 2) | + ((uint32_t)pFilterConfig->DestAddrInverseFiltering << 3) | + ((uint32_t)pFilterConfig->PassAllMulticast << 4) | + ((uint32_t)((pFilterConfig->BroadcastFilter == DISABLE) ? 1U : 0U) << 5) | + ((uint32_t)pFilterConfig->SrcAddrInverseFiltering << 8) | + ((uint32_t)pFilterConfig->SrcAddrFiltering << 9) | + ((uint32_t)pFilterConfig->HachOrPerfectFilter << 10) | + ((uint32_t)pFilterConfig->ReceiveAllMode << 31) | + pFilterConfig->ControlPacketsFilter); + + MODIFY_REG(heth->Instance->MACPFR, ETH_MACPFR_MASK, filterconfig); + + return HAL_OK; +} + +/** + * @brief Get the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that will hold + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(const ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + pFilterConfig->PromiscuousMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PR)) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashUnicast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HUC) >> 1) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HMC) >> 2) > 0U) ? ENABLE : DISABLE; + pFilterConfig->DestAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_DAIF) >> 3) > 0U) ? ENABLE : DISABLE; + pFilterConfig->PassAllMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PM) >> 4) > 0U) ? ENABLE : DISABLE; + pFilterConfig->BroadcastFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_DBF) >> 5) == 0U) ? ENABLE : DISABLE; + pFilterConfig->ControlPacketsFilter = READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PCF); + pFilterConfig->SrcAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_SAIF) >> 8) > 0U) ? ENABLE : DISABLE; + pFilterConfig->SrcAddrFiltering = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_SAF) >> 9) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HachOrPerfectFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HPF) >> 10) > 0U) + ? ENABLE : DISABLE; + pFilterConfig->ReceiveAllMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_RA) >> 31) > 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Set the source MAC Address to be matched. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param AddrNbr: The MAC address to configure + * This parameter must be a value of the following: + * ETH_MAC_ADDRESS1 + * ETH_MAC_ADDRESS2 + * ETH_MAC_ADDRESS3 + * @param pMACAddr: Pointer to MAC address buffer data (6 bytes) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(const ETH_HandleTypeDef *heth, uint32_t AddrNbr, + const uint8_t *pMACAddr) +{ + uint32_t macaddrlr; + uint32_t macaddrhr; + + if (pMACAddr == NULL) + { + return HAL_ERROR; + } + + /* Get mac addr high reg offset */ + macaddrhr = ((uint32_t) &(heth->Instance->MACA0HR) + AddrNbr); + /* Get mac addr low reg offset */ + macaddrlr = ((uint32_t) &(heth->Instance->MACA0LR) + AddrNbr); + + /* Set MAC addr bits 32 to 47 */ + (*(__IO uint32_t *)macaddrhr) = (((uint32_t)(pMACAddr[5]) << 8) | (uint32_t)pMACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + (*(__IO uint32_t *)macaddrlr) = (((uint32_t)(pMACAddr[3]) << 24) | ((uint32_t)(pMACAddr[2]) << 16) | + ((uint32_t)(pMACAddr[1]) << 8) | (uint32_t)pMACAddr[0]); + + /* Enable address and set source address bit */ + (*(__IO uint32_t *)macaddrhr) |= (ETH_MACAHR_SA | ETH_MACAHR_AE); + + return HAL_OK; +} + +/** + * @brief Set the ETH Hash Table Value. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pHashTable: pointer to a table of two 32 bit values, that contains + * the 64 bits of the hash table. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable) +{ + if (pHashTable == NULL) + { + return HAL_ERROR; + } + + heth->Instance->MACHT0R = pHashTable[0]; + heth->Instance->MACHT1R = pHashTable[1]; + + return HAL_OK; +} + +/** + * @brief Set the VLAN Identifier for Rx packets + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ComparisonBits: 12 or 16 bit comparison mode + must be a value of @ref ETH_VLAN_Tag_Comparison + * @param VLANIdentifier: VLAN Identifier value + * @retval None + */ +void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, uint32_t VLANIdentifier) +{ + if (ComparisonBits == ETH_VLANTAGCOMPARISON_16BIT) + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL, VLANIdentifier); + CLEAR_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } + else + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL_VID, VLANIdentifier); + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } +} + +/** + * @brief Enters the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pPowerDownConfig: a pointer to ETH_PowerDownConfigTypeDef structure + * that contains the Power Down configuration + * @retval None. + */ +void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, const ETH_PowerDownConfigTypeDef *pPowerDownConfig) +{ + uint32_t powerdownconfig; + + powerdownconfig = (((uint32_t)pPowerDownConfig->MagicPacket << 1) | + ((uint32_t)pPowerDownConfig->WakeUpPacket << 2) | + ((uint32_t)pPowerDownConfig->GlobalUnicast << 9) | + ((uint32_t)pPowerDownConfig->WakeUpForward << 10) | + ETH_MACPCSR_PWRDWN); + + /* Enable PMT interrupt */ + __HAL_ETH_MAC_ENABLE_IT(heth, ETH_MACIER_PMTIE); + + MODIFY_REG(heth->Instance->MACPCSR, ETH_MACPCSR_MASK, powerdownconfig); +} + +/** + * @brief Exits from the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth) +{ + /* clear wake up sources */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKPKTEN | ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | + ETH_MACPCSR_RWKPFE); + + if (READ_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN) != (uint32_t)RESET) + { + /* Exit power down mode */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN); + } + + /* Disable PMT interrupt */ + __HAL_ETH_MAC_DISABLE_IT(heth, ETH_MACIER_PMTIE); +} + +/** + * @brief Set the WakeUp filter. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilter: pointer to filter registers values + * @param Count: number of filter registers, must be from 1 to 8. + * @retval None. + */ +HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count) +{ + uint32_t regindex; + + if (pFilter == NULL) + { + return HAL_ERROR; + } + + /* Reset Filter Pointer */ + SET_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKFILTRST); + + /* Wake up packet filter config */ + for (regindex = 0; regindex < Count; regindex++) + { + /* Write filter regs */ + WRITE_REG(heth->Instance->MACRWKPFR, pFilter[regindex]); + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief ETH State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + ETH communication process, return Peripheral Errors occurred during communication + process + + +@endverbatim + * @{ + */ + +/** + * @brief Returns the ETH state. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL state + */ +HAL_ETH_StateTypeDef HAL_ETH_GetState(const ETH_HandleTypeDef *heth) +{ + return heth->gState; +} + +/** + * @brief Returns the ETH error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH Error Code + */ +uint32_t HAL_ETH_GetError(const ETH_HandleTypeDef *heth) +{ + return heth->ErrorCode; +} + +/** + * @brief Returns the ETH DMA error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH DMA Error Code + */ +uint32_t HAL_ETH_GetDMAError(const ETH_HandleTypeDef *heth) +{ + return heth->DMAErrorCode; +} + +/** + * @brief Returns the ETH MAC error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC Error Code + */ +uint32_t HAL_ETH_GetMACError(const ETH_HandleTypeDef *heth) +{ + return heth->MACErrorCode; +} + +/** + * @brief Returns the ETH MAC WakeUp event source + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC WakeUp event source + */ +uint32_t HAL_ETH_GetMACWakeUpSource(const ETH_HandleTypeDef *heth) +{ + return heth->MACWakeUpEvent; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup ETH_Private_Functions ETH Private Functions + * @{ + */ + +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, const ETH_MACConfigTypeDef *macconf) +{ + uint32_t macregval; + + /*------------------------ MACCR Configuration --------------------*/ + macregval = (macconf->InterPacketGapVal | + macconf->SourceAddrControl | + ((uint32_t)macconf->ChecksumOffload << 27) | + ((uint32_t)macconf->GiantPacketSizeLimitControl << 23) | + ((uint32_t)macconf->Support2KPacket << 22) | + ((uint32_t)macconf->CRCStripTypePacket << 21) | + ((uint32_t)macconf->AutomaticPadCRCStrip << 20) | + ((uint32_t)((macconf->Watchdog == DISABLE) ? 1U : 0U) << 19) | + ((uint32_t)((macconf->Jabber == DISABLE) ? 1U : 0U) << 17) | + ((uint32_t)macconf->JumboPacket << 16) | + macconf->Speed | + macconf->DuplexMode | + ((uint32_t)macconf->LoopbackMode << 12) | + ((uint32_t)macconf->CarrierSenseBeforeTransmit << 11) | + ((uint32_t)((macconf->ReceiveOwn == DISABLE) ? 1U : 0U) << 10) | + ((uint32_t)macconf->CarrierSenseDuringTransmit << 9) | + ((uint32_t)((macconf->RetryTransmission == DISABLE) ? 1U : 0U) << 8) | + macconf->BackOffLimit | + ((uint32_t)macconf->DeferralCheck << 4) | + macconf->PreambleLength); + + /* Write to MACCR */ + MODIFY_REG(heth->Instance->MACCR, ETH_MACCR_MASK, macregval); + + /*------------------------ MACECR Configuration --------------------*/ + macregval = ((macconf->ExtendedInterPacketGapVal << 25) | + ((uint32_t)macconf->ExtendedInterPacketGap << 24) | + ((uint32_t)macconf->UnicastSlowProtocolPacketDetect << 18) | + ((uint32_t)macconf->SlowProtocolDetect << 17) | + ((uint32_t)((macconf->CRCCheckingRxPackets == DISABLE) ? 1U : 0U) << 16) | + macconf->GiantPacketSizeLimit); + + /* Write to MACECR */ + MODIFY_REG(heth->Instance->MACECR, ETH_MACECR_MASK, macregval); + + /*------------------------ MACWTR Configuration --------------------*/ + macregval = (((uint32_t)macconf->ProgrammableWatchdog << 8) | + macconf->WatchdogTimeout); + + /* Write to MACWTR */ + MODIFY_REG(heth->Instance->MACWTR, ETH_MACWTR_MASK, macregval); + + /*------------------------ MACTFCR Configuration --------------------*/ + macregval = (((uint32_t)macconf->TransmitFlowControl << 1) | + macconf->PauseLowThreshold | + ((uint32_t)((macconf->ZeroQuantaPause == DISABLE) ? 1U : 0U) << 7) | + (macconf->PauseTime << 16)); + + /* Write to MACTFCR */ + MODIFY_REG(heth->Instance->MACTFCR, ETH_MACTFCR_MASK, macregval); + + /*------------------------ MACRFCR Configuration --------------------*/ + macregval = ((uint32_t)macconf->ReceiveFlowControl | + ((uint32_t)macconf->UnicastPausePacketDetect << 1)); + + /* Write to MACRFCR */ + MODIFY_REG(heth->Instance->MACRFCR, ETH_MACRFCR_MASK, macregval); + + /*------------------------ MTLTQOMR Configuration --------------------*/ + /* Write to MTLTQOMR */ + MODIFY_REG(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_MASK, macconf->TransmitQueueMode); + + /*------------------------ MTLRQOMR Configuration --------------------*/ + macregval = (macconf->ReceiveQueueMode | + ((uint32_t)((macconf->DropTCPIPChecksumErrorPacket == DISABLE) ? 1U : 0U) << 6) | + ((uint32_t)macconf->ForwardRxErrorPacket << 4) | + ((uint32_t)macconf->ForwardRxUndersizedGoodPacket << 3)); + + /* Write to MTLRQOMR */ + MODIFY_REG(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_MASK, macregval); +} + +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, const ETH_DMAConfigTypeDef *dmaconf) +{ + uint32_t dmaregval; + + /*------------------------ DMAMR Configuration --------------------*/ + MODIFY_REG(heth->Instance->DMAMR, ETH_DMAMR_MASK, dmaconf->DMAArbitration); + + /*------------------------ DMASBMR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->AddressAlignedBeats << 12) | + dmaconf->BurstMode | + ((uint32_t)dmaconf->RebuildINCRxBurst << 15)); + + MODIFY_REG(heth->Instance->DMASBMR, ETH_DMASBMR_MASK, dmaregval); + + /*------------------------ DMACCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->PBLx8Mode << 16) | + dmaconf->MaximumSegmentSize); + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_MASK, dmaregval); + + /*------------------------ DMACTCR Configuration --------------------*/ + dmaregval = (dmaconf->TxDMABurstLength | + ((uint32_t)dmaconf->SecondPacketOperate << 4) | + ((uint32_t)dmaconf->TCPSegmentation << 12)); + + MODIFY_REG(heth->Instance->DMACTCR, ETH_DMACTCR_MASK, dmaregval); + + /*------------------------ DMACRCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->FlushRxPacket << 31) | + dmaconf->RxDMABurstLength); + + /* Write to DMACRCR */ + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_MASK, dmaregval); +} + +/** + * @brief Configures Ethernet MAC and DMA with default parameters. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth) +{ + ETH_MACConfigTypeDef macDefaultConf; + ETH_DMAConfigTypeDef dmaDefaultConf; + + /*--------------- ETHERNET MAC registers default Configuration --------------*/ + macDefaultConf.AutomaticPadCRCStrip = ENABLE; + macDefaultConf.BackOffLimit = ETH_BACKOFFLIMIT_10; + macDefaultConf.CarrierSenseBeforeTransmit = DISABLE; + macDefaultConf.CarrierSenseDuringTransmit = DISABLE; + macDefaultConf.ChecksumOffload = ENABLE; + macDefaultConf.CRCCheckingRxPackets = ENABLE; + macDefaultConf.CRCStripTypePacket = ENABLE; + macDefaultConf.DeferralCheck = DISABLE; + macDefaultConf.DropTCPIPChecksumErrorPacket = ENABLE; + macDefaultConf.DuplexMode = ETH_FULLDUPLEX_MODE; + macDefaultConf.ExtendedInterPacketGap = DISABLE; + macDefaultConf.ExtendedInterPacketGapVal = 0x0U; + macDefaultConf.ForwardRxErrorPacket = DISABLE; + macDefaultConf.ForwardRxUndersizedGoodPacket = DISABLE; + macDefaultConf.GiantPacketSizeLimit = 0x618U; + macDefaultConf.GiantPacketSizeLimitControl = DISABLE; + macDefaultConf.InterPacketGapVal = ETH_INTERPACKETGAP_96BIT; + macDefaultConf.Jabber = ENABLE; + macDefaultConf.JumboPacket = DISABLE; + macDefaultConf.LoopbackMode = DISABLE; + macDefaultConf.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS_4; + macDefaultConf.PauseTime = 0x0U; + macDefaultConf.PreambleLength = ETH_PREAMBLELENGTH_7; + macDefaultConf.ProgrammableWatchdog = DISABLE; + macDefaultConf.ReceiveFlowControl = DISABLE; + macDefaultConf.ReceiveOwn = ENABLE; + macDefaultConf.ReceiveQueueMode = ETH_RECEIVESTOREFORWARD; + macDefaultConf.RetryTransmission = ENABLE; + macDefaultConf.SlowProtocolDetect = DISABLE; + macDefaultConf.SourceAddrControl = ETH_SOURCEADDRESS_REPLACE_ADDR0; + macDefaultConf.Speed = ETH_SPEED_100M; + macDefaultConf.Support2KPacket = DISABLE; + macDefaultConf.TransmitQueueMode = ETH_TRANSMITSTOREFORWARD; + macDefaultConf.TransmitFlowControl = DISABLE; + macDefaultConf.UnicastPausePacketDetect = DISABLE; + macDefaultConf.UnicastSlowProtocolPacketDetect = DISABLE; + macDefaultConf.Watchdog = ENABLE; + macDefaultConf.WatchdogTimeout = ETH_MACWTR_WTO_2KB; + macDefaultConf.ZeroQuantaPause = ENABLE; + + /* MAC default configuration */ + ETH_SetMACConfig(heth, &macDefaultConf); + + /*--------------- ETHERNET DMA registers default Configuration --------------*/ + dmaDefaultConf.AddressAlignedBeats = ENABLE; + dmaDefaultConf.BurstMode = ETH_BURSTLENGTH_FIXED; + dmaDefaultConf.DMAArbitration = ETH_DMAARBITRATION_RX1_TX1; + dmaDefaultConf.FlushRxPacket = DISABLE; + dmaDefaultConf.PBLx8Mode = DISABLE; + dmaDefaultConf.RebuildINCRxBurst = DISABLE; + dmaDefaultConf.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.SecondPacketOperate = DISABLE; + dmaDefaultConf.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.TCPSegmentation = DISABLE; + dmaDefaultConf.MaximumSegmentSize = ETH_SEGMENT_SIZE_DEFAULT; + + /* DMA default configuration */ + ETH_SetDMAConfig(heth, &dmaDefaultConf); +} + +/** + * @brief Initializes the DMA Tx descriptors. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmatxdesc; + uint32_t i; + + /* Fill each DMATxDesc descriptor with the right values */ + for (i = 0; i < (uint32_t)ETH_TX_DESC_CNT; i++) + { + dmatxdesc = heth->Init.TxDesc + i; + + WRITE_REG(dmatxdesc->DESC0, 0x0U); + WRITE_REG(dmatxdesc->DESC1, 0x0U); + WRITE_REG(dmatxdesc->DESC2, 0x0U); + WRITE_REG(dmatxdesc->DESC3, 0x0U); + + WRITE_REG(heth->TxDescList.TxDesc[i], (uint32_t)dmatxdesc); + + } + + heth->TxDescList.CurTxDesc = 0; + + /* Set Transmit Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACTDRLR, (ETH_TX_DESC_CNT - 1U)); + + /* Set Transmit Descriptor List Address */ + WRITE_REG(heth->Instance->DMACTDLAR, (uint32_t) heth->Init.TxDesc); + + /* Set Transmit Descriptor Tail pointer */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t) heth->Init.TxDesc); +} + +/** + * @brief Initializes the DMA Rx descriptors in chain mode. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t i; + + for (i = 0; i < (uint32_t)ETH_RX_DESC_CNT; i++) + { + dmarxdesc = heth->Init.RxDesc + i; + + WRITE_REG(dmarxdesc->DESC0, 0x0U); + WRITE_REG(dmarxdesc->DESC1, 0x0U); + WRITE_REG(dmarxdesc->DESC2, 0x0U); + WRITE_REG(dmarxdesc->DESC3, 0x0U); + WRITE_REG(dmarxdesc->BackupAddr0, 0x0U); + WRITE_REG(dmarxdesc->BackupAddr1, 0x0U); + + /* Set Rx descritors addresses */ + WRITE_REG(heth->RxDescList.RxDesc[i], (uint32_t)dmarxdesc); + + } + + WRITE_REG(heth->RxDescList.RxDescIdx, 0U); + WRITE_REG(heth->RxDescList.RxDescCnt, 0U); + WRITE_REG(heth->RxDescList.RxBuildDescIdx, 0U); + WRITE_REG(heth->RxDescList.RxBuildDescCnt, 0U); + WRITE_REG(heth->RxDescList.ItMode, 0U); + + /* Set Receive Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACRDRLR, ((uint32_t)(ETH_RX_DESC_CNT - 1U))); + + /* Set Receive Descriptor List Address */ + WRITE_REG(heth->Instance->DMACRDLAR, (uint32_t) heth->Init.RxDesc); + + /* Set Receive Descriptor Tail pointer Address */ + WRITE_REG(heth->Instance->DMACRDTPR, ((uint32_t)(heth->Init.RxDesc + (uint32_t)(ETH_RX_DESC_CNT - 1U)))); +} + +/** + * @brief Prepare Tx DMA descriptor before transmission. + * called by HAL_ETH_Transmit_IT and HAL_ETH_Transmit_IT() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Tx packet configuration + * @param ItMode: Enable or disable Tx EOT interrept + * @retval Status + */ +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, const ETH_TxPacketConfigTypeDef *pTxConfig, + uint32_t ItMode) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + uint32_t firstdescidx = dmatxdesclist->CurTxDesc; + uint32_t idx; + uint32_t descnbr = 0; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + ETH_BufferTypeDef *txbuffer = pTxConfig->TxBuffer; + uint32_t bd_count = 0; + uint32_t primask_bit; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + return HAL_ETH_ERROR_BUSY; + } + + /***************************************************************************/ + /***************** Context descriptor configuration (Optional) **********/ + /***************************************************************************/ + /* If VLAN tag is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set vlan tag value */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_VT, pTxConfig->VlanTag); + /* Set vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_VLTV); + /* Set the descriptor as the vlan input source */ + SET_BIT(heth->Instance->MACVIR, ETH_MACVIR_VLTI); + + /* if inner VLAN is enabled */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_INNERVLANTAG) != (uint32_t)RESET) + { + /* Set inner vlan tag value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_IVT, (pTxConfig->InnerVlanTag << 16)); + /* Set inner vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_IVLTV); + + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_IVTIR, pTxConfig->InnerVlanCtrl); + + /* Set the descriptor as the inner vlan input source */ + SET_BIT(heth->Instance->MACIVIR, ETH_MACIVIR_VLTI); + /* Enable double VLAN processing */ + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_EDVLP); + } + } + + /* if tcp segmentation is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set MSS value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_MSS, pTxConfig->MaxSegmentSize); + /* Set MSS valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_TCMSSV); + } + + if ((READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + || (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET)) + { + /* Set as context descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + descnbr += 1U; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if (READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + { + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[firstdescidx]; + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Clear own bit */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + + return HAL_ETH_ERROR_BUSY; + } + } + + /***************************************************************************/ + /***************** Normal descriptors configuration *****************/ + /***************************************************************************/ + + descnbr += 1U; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0U); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP Header length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_THL, (pTxConfig->TCPHeaderLen << 19)); + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CRCPAD) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CPC, pTxConfig->CRCPadCtrl); + } + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_VTIR, pTxConfig->VlanCtrl); + } + + /* Mark it as First Descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* set OWN bit of FIRST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* If source address insertion/replacement is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_SAIC) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_SAIC, pTxConfig->SrcAddrCtrl); + } + + /* only if the packet is split into more than one descriptors > 1 */ + while (txbuffer->next != NULL) + { + /* Clear the LD bit of previous descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* Clear the FD bit of new Descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN) == ETH_DMATXNDESCRF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + descidx = firstdescidx; + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* clear previous desc own bit */ + for (idx = 0; idx < descnbr; idx ++) + { + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + } + + return HAL_ETH_ERROR_BUSY; + } + + descnbr += 1U; + + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0U); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + /* Set the packet length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + /* Checksum Insertion Control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + } + + bd_count += 1U; + + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set Own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + } + + if (ItMode != ((uint32_t)RESET)) + { + /* Set Interrupt on completion bit */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + else + { + /* Clear Interrupt on completion bit */ + CLEAR_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + + /* Mark it as LAST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Save the current packet address to expose it to the application */ + dmatxdesclist->PacketAddress[descidx] = dmatxdesclist->CurrentPacketAddress; + + dmatxdesclist->CurTxDesc = descidx; + + /* Enter critical section */ + primask_bit = __get_PRIMASK(); + __set_PRIMASK(1); + + dmatxdesclist->BuffersInUse += bd_count + 1U; + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); + + /* Return function status */ + return HAL_ETH_ERROR_NONE; +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth) +{ + /* Init the ETH Callback settings */ + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; /* Legacy weak TxCpltCallback */ + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; /* Legacy weak RxCpltCallback */ + heth->ErrorCallback = HAL_ETH_ErrorCallback; /* Legacy weak ErrorCallback */ + heth->PMTCallback = HAL_ETH_PMTCallback; /* Legacy weak PMTCallback */ + heth->EEECallback = HAL_ETH_EEECallback; /* Legacy weak EEECallback */ + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; /* Legacy weak WakeUpCallback */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; /* Legacy weak RxLinkCallback */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; /* Legacy weak TxFreeCallback */ +#ifdef HAL_ETH_USE_PTP + heth->txPtpCallback = HAL_ETH_TxPtpCallback; /* Legacy weak TxPtpCallback */ +#endif /* HAL_ETH_USE_PTP */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; /* Legacy weak RxAllocateCallback */ +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth_ex.c new file mode 100644 index 000000000..9987ab2c9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_eth_ex.c @@ -0,0 +1,660 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_eth_ex.c + * @author MCD Application Team + * @brief ETH HAL Extended module driver. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined(ETH) + +/** @defgroup ETHEx ETHEx + * @brief ETH HAL Extended module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ETHEx_Private_Constants ETHEx Private Constants + * @{ + */ +#define ETH_MACL4CR_MASK (ETH_MACL3L4CR_L4PEN | ETH_MACL3L4CR_L4SPM | \ + ETH_MACL3L4CR_L4SPIM | ETH_MACL3L4CR_L4DPM | \ + ETH_MACL3L4CR_L4DPIM) + +#define ETH_MACL3CR_MASK (ETH_MACL3L4CR_L3PEN | ETH_MACL3L4CR_L3SAM | \ + ETH_MACL3L4CR_L3SAIM | ETH_MACL3L4CR_L3DAM | \ + ETH_MACL3L4CR_L3DAIM | ETH_MACL3L4CR_L3HSBM | \ + ETH_MACL3L4CR_L3HDBM) + +#define ETH_MACRXVLAN_MASK (ETH_MACVTR_EIVLRXS | ETH_MACVTR_EIVLS | \ + ETH_MACVTR_ERIVLT | ETH_MACVTR_EDVLP | \ + ETH_MACVTR_VTHM | ETH_MACVTR_EVLRXS | \ + ETH_MACVTR_EVLS | ETH_MACVTR_DOVLTC | \ + ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL | \ + ETH_MACVTR_VTIM | ETH_MACVTR_ETV) + +#define ETH_MACTXVLAN_MASK (ETH_MACVIR_VLTI | ETH_MACVIR_CSVL | \ + ETH_MACVIR_VLP | ETH_MACVIR_VLC) + +#define ETH_MAC_L4_SRSP_MASK 0x0000FFFFU +#define ETH_MAC_L4_DSTP_MASK 0xFFFF0000U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Functions ETH Extended Exported Functions + * @{ + */ + +/** @defgroup ETHEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure ARP offload module + (+) Configure L3 and L4 filters + (+) Configure Extended VLAN features + (+) Configure Energy Efficient Ethernet module + +@endverbatim + * @{ + */ + +/** + * @brief Enables ARP Offload. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ + +void HAL_ETHEx_EnableARPOffload(ETH_HandleTypeDef *heth) +{ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_ARP); +} + +/** + * @brief Disables ARP Offload. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETHEx_DisableARPOffload(ETH_HandleTypeDef *heth) +{ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_ARP); +} + +/** + * @brief Set the ARP Match IP address + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param IpAddress: IP Address to be matched for incoming ARP requests + * @retval None + */ +void HAL_ETHEx_SetARPAddressMatch(ETH_HandleTypeDef *heth, uint32_t IpAddress) +{ + WRITE_REG(heth->Instance->MACARPAR, IpAddress); +} + +/** + * @brief Configures the L4 Filter, this function allow to: + * set the layer 4 protocol to be matched (TCP or UDP) + * enable/disable L4 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L4 filter to configured, this parameter must be one of the following + * ETH_L4_FILTER_0 + * ETH_L4_FILTER_1 + * @param pL4FilterConfig: pointer to a ETH_L4FilterConfigTypeDef structure + * that contains L4 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L4FilterConfigTypeDef *pL4FilterConfig) +{ + if (pL4FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L4_FILTER_0) + { + /* Write configuration to MACL3L4C0R register */ + MODIFY_REG(heth->Instance->MACL3L4C0R, ETH_MACL4CR_MASK, (pL4FilterConfig->Protocol | + pL4FilterConfig->SrcPortFilterMatch | + pL4FilterConfig->DestPortFilterMatch)); + + /* Write configuration to MACL4A0R register */ + WRITE_REG(heth->Instance->MACL4A0R, (pL4FilterConfig->SourcePort | (pL4FilterConfig->DestinationPort << 16))); + + } + else /* Filter == ETH_L4_FILTER_1 */ + { + /* Write configuration to MACL3L4C1R register */ + MODIFY_REG(heth->Instance->MACL3L4C1R, ETH_MACL4CR_MASK, (pL4FilterConfig->Protocol | + pL4FilterConfig->SrcPortFilterMatch | + pL4FilterConfig->DestPortFilterMatch)); + + /* Write configuration to MACL4A1R register */ + WRITE_REG(heth->Instance->MACL4A1R, (pL4FilterConfig->SourcePort | (pL4FilterConfig->DestinationPort << 16))); + } + + /* Enable L4 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); + + return HAL_OK; +} + +/** + * @brief Configures the L4 Filter, this function allow to: + * set the layer 4 protocol to be matched (TCP or UDP) + * enable/disable L4 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L4 filter to configured, this parameter must be one of the following + * ETH_L4_FILTER_0 + * ETH_L4_FILTER_1 + * @param pL4FilterConfig: pointer to a ETH_L4FilterConfigTypeDef structure + * that contains L4 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetL4FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L4FilterConfigTypeDef *pL4FilterConfig) +{ + if (pL4FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L4_FILTER_0) + { + /* Get configuration from MACL3L4C0R register */ + pL4FilterConfig->Protocol = READ_BIT(heth->Instance->MACL3L4C0R, ETH_MACL3L4CR_L4PEN); + pL4FilterConfig->DestPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C0R, + (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM)); + pL4FilterConfig->SrcPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C0R, + (ETH_MACL3L4CR_L4SPM | ETH_MACL3L4CR_L4SPIM)); + + /* Get configuration from MACL4A0R register */ + pL4FilterConfig->DestinationPort = (READ_BIT(heth->Instance->MACL4A0R, ETH_MAC_L4_DSTP_MASK) >> 16); + pL4FilterConfig->SourcePort = READ_BIT(heth->Instance->MACL4A0R, ETH_MAC_L4_SRSP_MASK); + } + else /* Filter == ETH_L4_FILTER_1 */ + { + /* Get configuration from MACL3L4C1R register */ + pL4FilterConfig->Protocol = READ_BIT(heth->Instance->MACL3L4C1R, ETH_MACL3L4CR_L4PEN); + pL4FilterConfig->DestPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C1R, + (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM)); + pL4FilterConfig->SrcPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C1R, + (ETH_MACL3L4CR_L4SPM | ETH_MACL3L4CR_L4SPIM)); + + /* Get configuration from MACL4A1R register */ + pL4FilterConfig->DestinationPort = (READ_BIT(heth->Instance->MACL4A1R, ETH_MAC_L4_DSTP_MASK) >> 16); + pL4FilterConfig->SourcePort = READ_BIT(heth->Instance->MACL4A1R, ETH_MAC_L4_SRSP_MASK); + } + + return HAL_OK; +} + +/** + * @brief Configures the L3 Filter, this function allow to: + * set the layer 3 protocol to be matched (IPv4 or IPv6) + * enable/disable L3 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L3 filter to configured, this parameter must be one of the following + * ETH_L3_FILTER_0 + * ETH_L3_FILTER_1 + * @param pL3FilterConfig: pointer to a ETH_L3FilterConfigTypeDef structure + * that contains L3 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L3FilterConfigTypeDef *pL3FilterConfig) +{ + if (pL3FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L3_FILTER_0) + { + /* Write configuration to MACL3L4C0R register */ + MODIFY_REG(heth->Instance->MACL3L4C0R, ETH_MACL3CR_MASK, (pL3FilterConfig->Protocol | + pL3FilterConfig->SrcAddrFilterMatch | + pL3FilterConfig->DestAddrFilterMatch | + (pL3FilterConfig->SrcAddrHigherBitsMatch << 6) | + (pL3FilterConfig->DestAddrHigherBitsMatch << 11))); + } + else /* Filter == ETH_L3_FILTER_1 */ + { + /* Write configuration to MACL3L4C1R register */ + MODIFY_REG(heth->Instance->MACL3L4C1R, ETH_MACL3CR_MASK, (pL3FilterConfig->Protocol | + pL3FilterConfig->SrcAddrFilterMatch | + pL3FilterConfig->DestAddrFilterMatch | + (pL3FilterConfig->SrcAddrHigherBitsMatch << 6) | + (pL3FilterConfig->DestAddrHigherBitsMatch << 11))); + } + + if (Filter == ETH_L3_FILTER_0) + { + /* Check if IPv6 protocol is selected */ + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + /* Set the IPv6 address match */ + /* Set Bits[31:0] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A0R0R, pL3FilterConfig->Ip6Addr[0]); + /* Set Bits[63:32] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R0R, pL3FilterConfig->Ip6Addr[1]); + /* update Bits[95:64] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A2R0R, pL3FilterConfig->Ip6Addr[2]); + /* update Bits[127:96] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A3R0R, pL3FilterConfig->Ip6Addr[3]); + } + else /* IPv4 protocol is selected */ + { + /* Set the IPv4 source address match */ + WRITE_REG(heth->Instance->MACL3A0R0R, pL3FilterConfig->Ip4SrcAddr); + /* Set the IPv4 destination address match */ + WRITE_REG(heth->Instance->MACL3A1R0R, pL3FilterConfig->Ip4DestAddr); + } + } + else /* Filter == ETH_L3_FILTER_1 */ + { + /* Check if IPv6 protocol is selected */ + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + /* Set the IPv6 address match */ + /* Set Bits[31:0] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip6Addr[0]); + /* Set Bits[63:32] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[1]); + /* update Bits[95:64] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[2]); + /* update Bits[127:96] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[3]); + } + else /* IPv4 protocol is selected */ + { + /* Set the IPv4 source address match */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip4SrcAddr); + /* Set the IPv4 destination address match */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip4DestAddr); + + } + } + + /* Enable L3 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); + + return HAL_OK; +} + +/** + * @brief Configures the L3 Filter, this function allow to: + * set the layer 3 protocol to be matched (IPv4 or IPv6) + * enable/disable L3 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L3 filter to configured, this parameter must be one of the following + * ETH_L3_FILTER_0 + * ETH_L3_FILTER_1 + * @param pL3FilterConfig: pointer to a ETH_L3FilterConfigTypeDef structure + * that will contain the L3 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetL3FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L3FilterConfigTypeDef *pL3FilterConfig) +{ + if (pL3FilterConfig == NULL) + { + return HAL_ERROR; + } + pL3FilterConfig->Protocol = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3PEN); + pL3FilterConfig->SrcAddrFilterMatch = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + (ETH_MACL3L4CR_L3SAM | ETH_MACL3L4CR_L3SAIM)); + pL3FilterConfig->DestAddrFilterMatch = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + (ETH_MACL3L4CR_L3DAM | ETH_MACL3L4CR_L3DAIM)); + pL3FilterConfig->SrcAddrHigherBitsMatch = (READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3HSBM) >> 6); + pL3FilterConfig->DestAddrHigherBitsMatch = (READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3HDBM) >> 11); + + if (Filter == ETH_L3_FILTER_0) + { + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + WRITE_REG(pL3FilterConfig->Ip6Addr[0], heth->Instance->MACL3A0R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[1], heth->Instance->MACL3A1R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[2], heth->Instance->MACL3A2R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[3], heth->Instance->MACL3A3R0R); + } + else + { + WRITE_REG(pL3FilterConfig->Ip4SrcAddr, heth->Instance->MACL3A0R0R); + WRITE_REG(pL3FilterConfig->Ip4DestAddr, heth->Instance->MACL3A1R0R); + } + } + else /* ETH_L3_FILTER_1 */ + { + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + WRITE_REG(pL3FilterConfig->Ip6Addr[0], heth->Instance->MACL3A0R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[1], heth->Instance->MACL3A1R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[2], heth->Instance->MACL3A2R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[3], heth->Instance->MACL3A3R1R); + } + else + { + WRITE_REG(pL3FilterConfig->Ip4SrcAddr, heth->Instance->MACL3A0R1R); + WRITE_REG(pL3FilterConfig->Ip4DestAddr, heth->Instance->MACL3A1R1R); + } + } + + return HAL_OK; +} + +/** + * @brief Enables L3 and L4 filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_EnableL3L4Filtering(ETH_HandleTypeDef *heth) +{ + /* Enable L3/L4 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); +} + +/** + * @brief Disables L3 and L4 filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_DisableL3L4Filtering(ETH_HandleTypeDef *heth) +{ + /* Disable L3/L4 filter */ + CLEAR_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); +} + +/** + * @brief Get the VLAN Configuration for Receive Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pVlanConfig: pointer to a ETH_RxVLANConfigTypeDef structure + * that will contain the VLAN filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetRxVLANConfig(const ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + pVlanConfig->InnerVLANTagInStatus = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EIVLRXS) >> 31) == 0U) ? DISABLE : ENABLE; + pVlanConfig->StripInnerVLANTag = READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_EIVLS); + pVlanConfig->InnerVLANTag = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_ERIVLT) >> 27) == 0U) ? DISABLE : ENABLE; + pVlanConfig->DoubleVLANProcessing = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EDVLP) >> 26) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagHashTableMatch = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_VTHM) >> 25) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagInStatus = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EVLRXS) >> 24) == 0U) ? DISABLE : ENABLE; + pVlanConfig->StripVLANTag = READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_EVLS); + pVlanConfig->VLANTypeCheck = READ_BIT(heth->Instance->MACVTR, + (ETH_MACVTR_DOVLTC | ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL)); + pVlanConfig->VLANTagInverceMatch = ((READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_VTIM) >> 17) == 0U) + ? DISABLE : ENABLE; + + return HAL_OK; +} + +/** + * @brief Set the VLAN Configuration for Receive Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pVlanConfig: pointer to a ETH_RxVLANConfigTypeDef structure + * that contains VLAN filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + /* Write config to MACVTR */ + MODIFY_REG(heth->Instance->MACVTR, ETH_MACRXVLAN_MASK, (((uint32_t)pVlanConfig->InnerVLANTagInStatus << 31) | + pVlanConfig->StripInnerVLANTag | + ((uint32_t)pVlanConfig->InnerVLANTag << 27) | + ((uint32_t)pVlanConfig->DoubleVLANProcessing << 26) | + ((uint32_t)pVlanConfig->VLANTagHashTableMatch << 25) | + ((uint32_t)pVlanConfig->VLANTagInStatus << 24) | + pVlanConfig->StripVLANTag | + pVlanConfig->VLANTypeCheck | + ((uint32_t)pVlanConfig->VLANTagInverceMatch << 17))); + + return HAL_OK; +} + +/** + * @brief Set the VLAN Hash Table + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANHashTable: VLAN hash table 16 bit value + * @retval None + */ +void HAL_ETHEx_SetVLANHashTable(ETH_HandleTypeDef *heth, uint32_t VLANHashTable) +{ + MODIFY_REG(heth->Instance->MACVHTR, ETH_MACVHTR_VLHT, VLANHashTable); +} + +/** + * @brief Get the VLAN Configuration for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param pVlanConfig: pointer to a ETH_TxVLANConfigTypeDef structure + * that will contain the Tx VLAN filter configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_ETHEx_GetTxVLANConfig(const ETH_HandleTypeDef *heth, uint32_t VLANTag, + ETH_TxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + pVlanConfig->SourceTxDesc = ((READ_BIT(heth->Instance->MACIVIR, ETH_MACVIR_VLTI) >> 20) == 0U) ? DISABLE : ENABLE; + pVlanConfig->SVLANType = ((READ_BIT(heth->Instance->MACIVIR, ETH_MACVIR_CSVL) >> 19) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagControl = READ_BIT(heth->Instance->MACIVIR, (ETH_MACVIR_VLP | ETH_MACVIR_VLC)); + } + else + { + pVlanConfig->SourceTxDesc = ((READ_BIT(heth->Instance->MACVIR, ETH_MACVIR_VLTI) >> 20) == 0U) ? DISABLE : ENABLE; + pVlanConfig->SVLANType = ((READ_BIT(heth->Instance->MACVIR, ETH_MACVIR_CSVL) >> 19) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagControl = READ_BIT(heth->Instance->MACVIR, (ETH_MACVIR_VLP | ETH_MACVIR_VLC)); + } + + return HAL_OK;; +} + +/** + * @brief Set the VLAN Configuration for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param pVlanConfig: pointer to a ETH_TxVLANConfigTypeDef structure + * that contains Tx VLAN filter configuration. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETHEx_SetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag, + const ETH_TxVLANConfigTypeDef *pVlanConfig) +{ + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + MODIFY_REG(heth->Instance->MACIVIR, ETH_MACTXVLAN_MASK, (((uint32_t)pVlanConfig->SourceTxDesc << 20) | + ((uint32_t)pVlanConfig->SVLANType << 19) | + pVlanConfig->VLANTagControl)); + /* Enable Double VLAN processing */ + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_EDVLP); + } + else + { + MODIFY_REG(heth->Instance->MACVIR, ETH_MACTXVLAN_MASK, (((uint32_t)pVlanConfig->SourceTxDesc << 20) | + ((uint32_t)pVlanConfig->SVLANType << 19) | + pVlanConfig->VLANTagControl)); + } + + return HAL_OK; +} + +/** + * @brief Set the VLAN Tag Identifier for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param VLANIdentifier: VLAN Identifier 16 bit value + * @retval None + */ +void HAL_ETHEx_SetTxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t VLANTag, uint32_t VLANIdentifier) +{ + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + MODIFY_REG(heth->Instance->MACIVIR, ETH_MACVIR_VLT, VLANIdentifier); + } + else + { + MODIFY_REG(heth->Instance->MACVIR, ETH_MACVIR_VLT, VLANIdentifier); + } +} + +/** + * @brief Enables the VLAN Tag Filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_EnableVLANProcessing(ETH_HandleTypeDef *heth) +{ + /* Enable VLAN processing */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_VTFE); +} + +/** + * @brief Disables the VLAN Tag Filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_DisableVLANProcessing(ETH_HandleTypeDef *heth) +{ + /* Disable VLAN processing */ + CLEAR_BIT(heth->Instance->MACPFR, ETH_MACPFR_VTFE); +} + +/** + * @brief Enters the Low Power Idle (LPI) mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param TxAutomate: Enable/Disable automate enter/exit LPI mode. + * @param TxClockStop: Enable/Disable Tx clock stop in LPI mode. + * @retval None + */ +void HAL_ETHEx_EnterLPIMode(ETH_HandleTypeDef *heth, FunctionalState TxAutomate, FunctionalState TxClockStop) +{ + /* Enable LPI Interrupts */ + __HAL_ETH_MAC_ENABLE_IT(heth, ETH_MACIER_LPIIE); + + /* Write to LPI Control register: Enter low power mode */ + MODIFY_REG(heth->Instance->MACLCSR, (ETH_MACLCSR_LPIEN | ETH_MACLCSR_LPITXA | ETH_MACLCSR_LPITCSE), + (((uint32_t)TxAutomate << 19) | + ((uint32_t)TxClockStop << 21) | + ETH_MACLCSR_LPIEN)); +} + +/** + * @brief Exits the Low Power Idle (LPI) mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETHEx_ExitLPIMode(ETH_HandleTypeDef *heth) +{ + /* Clear the LPI Config and exit low power mode */ + CLEAR_BIT(heth->Instance->MACLCSR, (ETH_MACLCSR_LPIEN | ETH_MACLCSR_LPITXA | ETH_MACLCSR_LPITCSE)); + + /* Enable LPI Interrupts */ + __HAL_ETH_MAC_DISABLE_IT(heth, ETH_MACIER_LPIIE); +} + +/** + * @brief Returns the ETH MAC LPI event + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC WakeUp event + */ +uint32_t HAL_ETHEx_GetMACLPIEvent(const ETH_HandleTypeDef *heth) +{ + return heth->MACLPIEvent; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_exti.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_exti.c new file mode 100644 index 000000000..5d1a41ae0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_exti.c @@ -0,0 +1,639 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04u /* 0x10: Offset between MCU IMRx/EMRx registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: Offset between MCU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SBS->EXTICR[linepos >> 2u]; + regval &= ~(SBS_EXTICR1_PC_EXTI0 << (SBS_EXTICR1_PC_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SBS_EXTICR1_PC_EXTI1_Pos * (linepos & 0x03u))); + SBS->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + const __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + } + + /* Get falling configuration */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SBS->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = (regval >> (SBS_EXTICR1_PC_EXTI1_Pos * (linepos & 0x03u))) & SBS_EXTICR1_PC_EXTI0; + } + else + { + pExtiConfig->GPIOSel = 0x00u; + } + } + else + { + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(const EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SBS->EXTICR[linepos >> 2u]; + regval &= ~(SBS_EXTICR1_PC_EXTI0 << (SBS_EXTICR1_PC_EXTI1_Pos * (linepos & 0x03u))); + SBS->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(const EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(const EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + const __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Get pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(const EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(const EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (__IO uint32_t *)(&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_fdcan.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_fdcan.c new file mode 100644 index 000000000..800fed828 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_fdcan.c @@ -0,0 +1,3538 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_fdcan.c + * @author MCD Application Team + * @brief FDCAN HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Flexible DataRate Controller Area Network + * (FDCAN) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Configuration and Control functions + * + Peripheral State and Error functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the FDCAN peripheral using HAL_FDCAN_Init function. + + (#) If needed , configure the reception filters and optional features using + the following configuration functions: + (++) HAL_FDCAN_ConfigFilter + (++) HAL_FDCAN_ConfigGlobalFilter + (++) HAL_FDCAN_ConfigExtendedIdMask + (++) HAL_FDCAN_ConfigRxFifoOverwrite + (++) HAL_FDCAN_ConfigRamWatchdog + (++) HAL_FDCAN_ConfigTimestampCounter + (++) HAL_FDCAN_EnableTimestampCounter + (++) HAL_FDCAN_DisableTimestampCounter + (++) HAL_FDCAN_ConfigTimeoutCounter + (++) HAL_FDCAN_EnableTimeoutCounter + (++) HAL_FDCAN_DisableTimeoutCounter + (++) HAL_FDCAN_ConfigTxDelayCompensation + (++) HAL_FDCAN_EnableTxDelayCompensation + (++) HAL_FDCAN_DisableTxDelayCompensation + (++) HAL_FDCAN_EnableISOMode + (++) HAL_FDCAN_DisableISOMode + (++) HAL_FDCAN_EnableEdgeFiltering + (++) HAL_FDCAN_DisableEdgeFiltering + + (#) Start the FDCAN module using HAL_FDCAN_Start function. At this level + the node is active on the bus: it can send and receive messages. + + (#) The following Tx control functions can only be called when the FDCAN + module is started: + (++) HAL_FDCAN_AddMessageToTxFifoQ + (++) HAL_FDCAN_AbortTxRequest + + (#) After having submitted a Tx request in Tx Fifo or Queue, it is possible to + get Tx buffer location used to place the Tx request thanks to + HAL_FDCAN_GetLatestTxFifoQRequestBuffer API. + It is then possible to abort later on the corresponding Tx Request using + HAL_FDCAN_AbortTxRequest API. + + (#) When a message is received into the FDCAN message RAM, it can be + retrieved using the HAL_FDCAN_GetRxMessage function. + + (#) Calling the HAL_FDCAN_Stop function stops the FDCAN module by entering + it to initialization mode and re-enabling access to configuration + registers through the configuration functions listed here above. + + (#) All other control functions can be called any time after initialization + phase, no matter if the FDCAN module is started or stopped. + + *** Polling mode operation *** + ============================== + [..] + (#) Reception and transmission states can be monitored via the following + functions: + (++) HAL_FDCAN_IsTxBufferMessagePending + (++) HAL_FDCAN_GetRxFifoFillLevel + (++) HAL_FDCAN_GetTxFifoFreeLevel + + *** Interrupt mode operation *** + ================================ + [..] + (#) There are two interrupt lines: line 0 and 1. + By default, all interrupts are assigned to line 0. Interrupt lines + can be configured using HAL_FDCAN_ConfigInterruptLines function. + + (#) Notifications are activated using HAL_FDCAN_ActivateNotification + function. Then, the process can be controlled through one of the + available user callbacks: HAL_FDCAN_xxxCallback. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_FDCAN_RegisterCallback() or HAL_FDCAN_RegisterXXXCallback() + to register an interrupt callback. + + Function HAL_FDCAN_RegisterCallback() allows to register following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback, TxBufferAbortCallback and ErrorStatusCallback use dedicated + register callbacks: respectively HAL_FDCAN_RegisterTxEventFifoCallback(), + HAL_FDCAN_RegisterRxFifo0Callback(), HAL_FDCAN_RegisterRxFifo1Callback(), + HAL_FDCAN_RegisterTxBufferCompleteCallback(), HAL_FDCAN_RegisterTxBufferAbortCallback() + and HAL_FDCAN_RegisterErrorStatusCallback(). + + Use function HAL_FDCAN_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_FDCAN_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) HighPriorityMessageCallback : High Priority Message Callback. + (+) TimestampWraparoundCallback : Timestamp Wraparound Callback. + (+) TimeoutOccurredCallback : Timeout Occurred Callback. + (+) ErrorCallback : Error Callback. + (+) MspInitCallback : FDCAN MspInit. + (+) MspDeInitCallback : FDCAN MspDeInit. + + For specific callbacks TxEventFifoCallback, RxFifo0Callback, RxFifo1Callback, + TxBufferCompleteCallback and TxBufferAbortCallback, use dedicated + unregister callbacks: respectively HAL_FDCAN_UnRegisterTxEventFifoCallback(), + HAL_FDCAN_UnRegisterRxFifo0Callback(), HAL_FDCAN_UnRegisterRxFifo1Callback(), + HAL_FDCAN_UnRegisterTxBufferCompleteCallback(), HAL_FDCAN_UnRegisterTxBufferAbortCallback() + and HAL_FDCAN_UnRegisterErrorStatusCallback(). + + By default, after the HAL_FDCAN_Init() and when the state is HAL_FDCAN_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples HAL_FDCAN_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_FDCAN_Init()/ HAL_FDCAN_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_FDCAN_Init()/ HAL_FDCAN_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_FDCAN_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_FDCAN_STATE_READY or HAL_FDCAN_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_FDCAN_RegisterCallback() before calling HAL_FDCAN_DeInit() + or HAL_FDCAN_Init() function. + + When The compilation define USE_HAL_FDCAN_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#if defined(FDCAN1) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup FDCAN FDCAN + * @brief FDCAN HAL module driver + * @{ + */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FDCAN_Private_Constants + * @{ + */ +#define FDCAN_TIMEOUT_VALUE 10U + +#define FDCAN_TX_EVENT_FIFO_MASK (FDCAN_IR_TEFL | FDCAN_IR_TEFF | FDCAN_IR_TEFN) +#define FDCAN_RX_FIFO0_MASK (FDCAN_IR_RF0L | FDCAN_IR_RF0F | FDCAN_IR_RF0N) +#define FDCAN_RX_FIFO1_MASK (FDCAN_IR_RF1L | FDCAN_IR_RF1F | FDCAN_IR_RF1N) +#define FDCAN_ERROR_MASK (FDCAN_IR_ELO | FDCAN_IR_WDI | FDCAN_IR_PEA | FDCAN_IR_PED | FDCAN_IR_ARA) +#define FDCAN_ERROR_STATUS_MASK (FDCAN_IR_EP | FDCAN_IR_EW | FDCAN_IR_BO) + +#define FDCAN_ELEMENT_MASK_STDID ((uint32_t)0x1FFC0000U) /* Standard Identifier */ +#define FDCAN_ELEMENT_MASK_EXTID ((uint32_t)0x1FFFFFFFU) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_RTR ((uint32_t)0x20000000U) /* Remote Transmission Request */ +#define FDCAN_ELEMENT_MASK_XTD ((uint32_t)0x40000000U) /* Extended Identifier */ +#define FDCAN_ELEMENT_MASK_ESI ((uint32_t)0x80000000U) /* Error State Indicator */ +#define FDCAN_ELEMENT_MASK_TS ((uint32_t)0x0000FFFFU) /* Timestamp */ +#define FDCAN_ELEMENT_MASK_DLC ((uint32_t)0x000F0000U) /* Data Length Code */ +#define FDCAN_ELEMENT_MASK_BRS ((uint32_t)0x00100000U) /* Bit Rate Switch */ +#define FDCAN_ELEMENT_MASK_FDF ((uint32_t)0x00200000U) /* FD Format */ +#define FDCAN_ELEMENT_MASK_EFC ((uint32_t)0x00800000U) /* Event FIFO Control */ +#define FDCAN_ELEMENT_MASK_MM ((uint32_t)0xFF000000U) /* Message Marker */ +#define FDCAN_ELEMENT_MASK_FIDX ((uint32_t)0x7F000000U) /* Filter Index */ +#define FDCAN_ELEMENT_MASK_ANMF ((uint32_t)0x80000000U) /* Accepted Non-matching Frame */ +#define FDCAN_ELEMENT_MASK_ET ((uint32_t)0x00C00000U) /* Event type */ + +#define SRAMCAN_FLS_NBR (28U) /* Max. Filter List Standard Number */ +#define SRAMCAN_FLE_NBR ( 8U) /* Max. Filter List Extended Number */ +#define SRAMCAN_RF0_NBR ( 3U) /* RX FIFO 0 Elements Number */ +#define SRAMCAN_RF1_NBR ( 3U) /* RX FIFO 1 Elements Number */ +#define SRAMCAN_TEF_NBR ( 3U) /* TX Event FIFO Elements Number */ +#define SRAMCAN_TFQ_NBR ( 3U) /* TX FIFO/Queue Elements Number */ + +#define SRAMCAN_FLS_SIZE ( 1U * 4U) /* Filter Standard Element Size in bytes */ +#define SRAMCAN_FLE_SIZE ( 2U * 4U) /* Filter Extended Element Size in bytes */ +#define SRAMCAN_RF0_SIZE (18U * 4U) /* RX FIFO 0 Elements Size in bytes */ +#define SRAMCAN_RF1_SIZE (18U * 4U) /* RX FIFO 1 Elements Size in bytes */ +#define SRAMCAN_TEF_SIZE ( 2U * 4U) /* TX Event FIFO Elements Size in bytes */ +#define SRAMCAN_TFQ_SIZE (18U * 4U) /* TX FIFO/Queue Elements Size in bytes */ + +#define SRAMCAN_FLSSA ((uint32_t)0) /* Filter List Standard Start + Address */ +#define SRAMCAN_FLESA ((uint32_t)(SRAMCAN_FLSSA + (SRAMCAN_FLS_NBR * SRAMCAN_FLS_SIZE))) /* Filter List Extended Start + Address */ +#define SRAMCAN_RF0SA ((uint32_t)(SRAMCAN_FLESA + (SRAMCAN_FLE_NBR * SRAMCAN_FLE_SIZE))) /* Rx FIFO 0 Start Address */ +#define SRAMCAN_RF1SA ((uint32_t)(SRAMCAN_RF0SA + (SRAMCAN_RF0_NBR * SRAMCAN_RF0_SIZE))) /* Rx FIFO 1 Start Address */ +#define SRAMCAN_TEFSA ((uint32_t)(SRAMCAN_RF1SA + (SRAMCAN_RF1_NBR * SRAMCAN_RF1_SIZE))) /* Tx Event FIFO Start + Address */ +#define SRAMCAN_TFQSA ((uint32_t)(SRAMCAN_TEFSA + (SRAMCAN_TEF_NBR * SRAMCAN_TEF_SIZE))) /* Tx FIFO/Queue Start + Address */ +#define SRAMCAN_SIZE ((uint32_t)(SRAMCAN_TFQSA + (SRAMCAN_TFQ_NBR * SRAMCAN_TFQ_SIZE))) /* Message RAM size */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FDCAN_Private_Variables + * @{ + */ +static const uint8_t DLCtoBytes[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64}; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup FDCAN_Private_Functions_Prototypes + * @{ + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan); +static void FDCAN_CopyMessageToRAM(const FDCAN_HandleTypeDef *hfdcan, const FDCAN_TxHeaderTypeDef *pTxHeader, + const uint8_t *pTxData, uint32_t BufferIndex); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FDCAN_Exported_Functions FDCAN Exported Functions + * @{ + */ + +/** @defgroup FDCAN_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the FDCAN. + (+) De-initialize the FDCAN. + (+) Enter FDCAN peripheral in power down mode. + (+) Exit power down mode. + (+) Register callbacks. + (+) Unregister callbacks. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FDCAN peripheral according to the specified + * parameters in the FDCAN_InitTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Init(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + if (hfdcan->Instance == FDCAN1) + { + assert_param(IS_FDCAN_CKDIV(hfdcan->Init.ClockDivider)); + } + assert_param(IS_FDCAN_FRAME_FORMAT(hfdcan->Init.FrameFormat)); + assert_param(IS_FDCAN_MODE(hfdcan->Init.Mode)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.AutoRetransmission)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.TransmitPause)); + assert_param(IS_FUNCTIONAL_STATE(hfdcan->Init.ProtocolException)); + assert_param(IS_FDCAN_NOMINAL_PRESCALER(hfdcan->Init.NominalPrescaler)); + assert_param(IS_FDCAN_NOMINAL_SJW(hfdcan->Init.NominalSyncJumpWidth)); + assert_param(IS_FDCAN_NOMINAL_TSEG1(hfdcan->Init.NominalTimeSeg1)); + assert_param(IS_FDCAN_NOMINAL_TSEG2(hfdcan->Init.NominalTimeSeg2)); + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + assert_param(IS_FDCAN_DATA_PRESCALER(hfdcan->Init.DataPrescaler)); + assert_param(IS_FDCAN_DATA_SJW(hfdcan->Init.DataSyncJumpWidth)); + assert_param(IS_FDCAN_DATA_TSEG1(hfdcan->Init.DataTimeSeg1)); + assert_param(IS_FDCAN_DATA_TSEG2(hfdcan->Init.DataTimeSeg2)); + } + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.StdFiltersNbr, SRAMCAN_FLS_NBR)); + assert_param(IS_FDCAN_MAX_VALUE(hfdcan->Init.ExtFiltersNbr, SRAMCAN_FLE_NBR)); + assert_param(IS_FDCAN_TX_FIFO_QUEUE_MODE(hfdcan->Init.TxFifoQueueMode)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Reset callbacks to legacy functions */ + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* TxEventFifoCallback */ + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* RxFifo0Callback */ + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* RxFifo1Callback */ + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; /* TxFifoEmptyCallback */ + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* TxBufferCompleteCallback */ + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* TxBufferAbortCallback */ + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; /* HighPriorityMessageCallback */ + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; /* TimestampWraparoundCallback */ + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; /* TimeoutOccurredCallback */ + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; /* ErrorCallback */ + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* ErrorStatusCallback */ + + if (hfdcan->MspInitCallback == NULL) + { + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware: CLOCK, NVIC */ + hfdcan->MspInitCallback(hfdcan); + } +#else + if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hfdcan->Lock = HAL_UNLOCKED; + + /* Init the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspInit(hfdcan); + } +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check Sleep mode acknowledge */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Check FDCAN instance */ + if (hfdcan->Instance == FDCAN1) + { + /* Configure Clock divider */ + FDCAN_CONFIG->CKDIV = hfdcan->Init.ClockDivider; + } + + /* Set the no automatic retransmission */ + if (hfdcan->Init.AutoRetransmission == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_DAR); + } + + /* Set the transmit pause feature */ + if (hfdcan->Init.TransmitPause == ENABLE) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + else + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TXP); + } + + /* Set the Protocol Exception Handling */ + if (hfdcan->Init.ProtocolException == ENABLE) + { + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + else + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_PXHD); + } + + /* Set FDCAN Frame Format */ + MODIFY_REG(hfdcan->Instance->CCCR, FDCAN_FRAME_FD_BRS, hfdcan->Init.FrameFormat); + + /* Reset FDCAN Operation Mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, (FDCAN_CCCR_TEST | FDCAN_CCCR_MON | FDCAN_CCCR_ASM)); + CLEAR_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + /* Set FDCAN Operating Mode: + | Normal | Restricted | Bus | Internal | External + | | Operation | Monitoring | LoopBack | LoopBack + CCCR.TEST | 0 | 0 | 0 | 1 | 1 + CCCR.MON | 0 | 0 | 1 | 1 | 0 + TEST.LBCK | 0 | 0 | 0 | 1 | 1 + CCCR.ASM | 0 | 1 | 0 | 0 | 0 + */ + if (hfdcan->Init.Mode == FDCAN_MODE_RESTRICTED_OPERATION) + { + /* Enable Restricted Operation mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + } + else if (hfdcan->Init.Mode != FDCAN_MODE_NORMAL) + { + if (hfdcan->Init.Mode != FDCAN_MODE_BUS_MONITORING) + { + /* Enable write access to TEST register */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_TEST); + + /* Enable LoopBack mode */ + SET_BIT(hfdcan->Instance->TEST, FDCAN_TEST_LBCK); + + if (hfdcan->Init.Mode == FDCAN_MODE_INTERNAL_LOOPBACK) + { + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Enable bus monitoring mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_MON); + } + } + else + { + /* Nothing to do: normal mode */ + } + + /* Set the nominal bit timing register */ + hfdcan->Instance->NBTP = ((((uint32_t)hfdcan->Init.NominalSyncJumpWidth - 1U) << FDCAN_NBTP_NSJW_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg1 - 1U) << FDCAN_NBTP_NTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.NominalTimeSeg2 - 1U) << FDCAN_NBTP_NTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.NominalPrescaler - 1U) << FDCAN_NBTP_NBRP_Pos)); + + /* If FD operation with BRS is selected, set the data bit timing register */ + if (hfdcan->Init.FrameFormat == FDCAN_FRAME_FD_BRS) + { + hfdcan->Instance->DBTP = ((((uint32_t)hfdcan->Init.DataSyncJumpWidth - 1U) << FDCAN_DBTP_DSJW_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg1 - 1U) << FDCAN_DBTP_DTSEG1_Pos) | \ + (((uint32_t)hfdcan->Init.DataTimeSeg2 - 1U) << FDCAN_DBTP_DTSEG2_Pos) | \ + (((uint32_t)hfdcan->Init.DataPrescaler - 1U) << FDCAN_DBTP_DBRP_Pos)); + } + + /* Select between Tx FIFO and Tx Queue operation modes */ + SET_BIT(hfdcan->Instance->TXBC, hfdcan->Init.TxFifoQueueMode); + + /* Calculate each RAM block address */ + FDCAN_CalcultateRamBlockAddresses(hfdcan); + + /* Initialize the Latest Tx request buffer index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Initialize the error code */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Initialize the FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitializes the FDCAN peripheral registers to their default reset values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Check FDCAN handle */ + if (hfdcan == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_FDCAN_ALL_INSTANCE(hfdcan->Instance)); + + /* Stop the FDCAN module: return value is voluntary ignored */ + (void)HAL_FDCAN_Stop(hfdcan); + + /* Disable Interrupt lines */ + CLEAR_BIT(hfdcan->Instance->ILE, (FDCAN_INTERRUPT_LINE0 | FDCAN_INTERRUPT_LINE1)); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + if (hfdcan->MspDeInitCallback == NULL) + { + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: CLOCK, NVIC */ + hfdcan->MspDeInitCallback(hfdcan); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_FDCAN_MspDeInit(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the FDCAN MSP. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Enter FDCAN peripheral in sleep mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnterPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Request clock stop */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN is ready for power down */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == 0U) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Exit power down mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitPowerDownMode(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t tickstart; + + /* Reset clock stop request */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + if ((HAL_GetTick() - tickstart) > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Enter normal operation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Return function status */ + return HAL_OK; +} + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 +/** + * @brief Register a FDCAN CallBack. + * To be used instead of the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID, + void (* pCallback)(FDCAN_HandleTypeDef *_hFDCAN)) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = pCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = pCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = pCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = pCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = pCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = pCallback; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a FDCAN CallBack. + * FDCAN callback is redirected to the weak predefined callback + * @param hfdcan pointer to a FDCAN_HandleTypeDef structure that contains + * the configuration information for FDCAN module + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_FDCAN_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty callback ID + * @arg @ref HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID High priority message callback ID + * @arg @ref HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID Timestamp wraparound callback ID + * @arg @ref HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID Timeout occurred callback ID + * @arg @ref HAL_FDCAN_ERROR_CALLBACK_CB_ID Error callback ID + * @arg @ref HAL_FDCAN_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_FDCAN_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterCallback(FDCAN_HandleTypeDef *hfdcan, HAL_FDCAN_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + switch (CallbackID) + { + case HAL_FDCAN_TX_FIFO_EMPTY_CB_ID : + hfdcan->TxFifoEmptyCallback = HAL_FDCAN_TxFifoEmptyCallback; + break; + + case HAL_FDCAN_HIGH_PRIO_MESSAGE_CB_ID : + hfdcan->HighPriorityMessageCallback = HAL_FDCAN_HighPriorityMessageCallback; + break; + + case HAL_FDCAN_TIMESTAMP_WRAPAROUND_CB_ID : + hfdcan->TimestampWraparoundCallback = HAL_FDCAN_TimestampWraparoundCallback; + break; + + case HAL_FDCAN_TIMEOUT_OCCURRED_CB_ID : + hfdcan->TimeoutOccurredCallback = HAL_FDCAN_TimeoutOccurredCallback; + break; + + case HAL_FDCAN_ERROR_CALLBACK_CB_ID : + hfdcan->ErrorCallback = HAL_FDCAN_ErrorCallback; + break; + + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hfdcan->State == HAL_FDCAN_STATE_RESET) + { + switch (CallbackID) + { + case HAL_FDCAN_MSPINIT_CB_ID : + hfdcan->MspInitCallback = HAL_FDCAN_MspInit; + break; + + case HAL_FDCAN_MSPDEINIT_CB_ID : + hfdcan->MspDeInitCallback = HAL_FDCAN_MspDeInit; + break; + + default : + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Event Fifo FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Event Fifo Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxEventFifoCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Event Fifo FDCAN Callback + * Tx Event Fifo FDCAN Callback is redirected to the weak HAL_FDCAN_TxEventFifoCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxEventFifoCallback = HAL_FDCAN_TxEventFifoCallback; /* Legacy weak TxEventFifoCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 0 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 0 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_RxFifo0CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 0 FDCAN Callback + * Rx Fifo 0 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo0Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo0Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo0Callback = HAL_FDCAN_RxFifo0Callback; /* Legacy weak RxFifo0Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Rx Fifo 1 FDCAN Callback + * To be used instead of the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Rx Fifo 1 Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_RxFifo1CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Rx Fifo 1 FDCAN Callback + * Rx Fifo 1 FDCAN Callback is redirected to the weak HAL_FDCAN_RxFifo1Callback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterRxFifo1Callback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->RxFifo1Callback = HAL_FDCAN_RxFifo1Callback; /* Legacy weak RxFifo1Callback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Complete FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Complete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxBufferCompleteCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Complete FDCAN Callback + * Tx Buffer Complete FDCAN Callback is redirected to + * the weak HAL_FDCAN_TxBufferCompleteCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferCompleteCallback = HAL_FDCAN_TxBufferCompleteCallback; /* Legacy weak TxBufferCompleteCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Tx Buffer Abort FDCAN Callback + * To be used instead of the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Tx Buffer Abort Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_TxBufferAbortCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Tx Buffer Abort FDCAN Callback + * Tx Buffer Abort FDCAN Callback is redirected to + * the weak HAL_FDCAN_TxBufferAbortCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterTxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->TxBufferAbortCallback = HAL_FDCAN_TxBufferAbortCallback; /* Legacy weak TxBufferAbortCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Error Status FDCAN Callback + * To be used instead of the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @param pCallback pointer to the Error Status Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_RegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, + pFDCAN_ErrorStatusCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = pCallback; + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Error Status FDCAN Callback + * Error Status FDCAN Callback is redirected to the weak HAL_FDCAN_ErrorStatusCallback() predefined callback + * @param hfdcan FDCAN handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_UnRegisterErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + hfdcan->ErrorStatusCallback = HAL_FDCAN_ErrorStatusCallback; /* Legacy weak ErrorStatusCallback */ + } + else + { + /* Update the error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group2 Configuration functions + * @brief FDCAN Configuration functions. + * +@verbatim + ============================================================================== + ##### Configuration functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigFilter : Configure the FDCAN reception filters + (+) HAL_FDCAN_ConfigGlobalFilter : Configure the FDCAN global filter + (+) HAL_FDCAN_ConfigExtendedIdMask : Configure the extended ID mask + (+) HAL_FDCAN_ConfigRxFifoOverwrite : Configure the Rx FIFO operation mode + (+) HAL_FDCAN_ConfigRamWatchdog : Configure the RAM watchdog + (+) HAL_FDCAN_ConfigTimestampCounter : Configure the timestamp counter + (+) HAL_FDCAN_EnableTimestampCounter : Enable the timestamp counter + (+) HAL_FDCAN_DisableTimestampCounter : Disable the timestamp counter + (+) HAL_FDCAN_GetTimestampCounter : Get the timestamp counter value + (+) HAL_FDCAN_ResetTimestampCounter : Reset the timestamp counter to zero + (+) HAL_FDCAN_ConfigTimeoutCounter : Configure the timeout counter + (+) HAL_FDCAN_EnableTimeoutCounter : Enable the timeout counter + (+) HAL_FDCAN_DisableTimeoutCounter : Disable the timeout counter + (+) HAL_FDCAN_GetTimeoutCounter : Get the timeout counter value + (+) HAL_FDCAN_ResetTimeoutCounter : Reset the timeout counter to its start value + (+) HAL_FDCAN_ConfigTxDelayCompensation : Configure the transmitter delay compensation + (+) HAL_FDCAN_EnableTxDelayCompensation : Enable the transmitter delay compensation + (+) HAL_FDCAN_DisableTxDelayCompensation : Disable the transmitter delay compensation + (+) HAL_FDCAN_EnableISOMode : Enable ISO 11898-1 protocol mode + (+) HAL_FDCAN_DisableISOMode : Disable ISO 11898-1 protocol mode + (+) HAL_FDCAN_EnableEdgeFiltering : Enable edge filtering during bus integration + (+) HAL_FDCAN_DisableEdgeFiltering : Disable edge filtering during bus integration + +@endverbatim + * @{ + */ + +/** + * @brief Configure the FDCAN reception filter according to the specified + * parameters in the FDCAN_FilterTypeDef structure. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param sFilterConfig pointer to an FDCAN_FilterTypeDef structure that + * contains the filter configuration information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigFilter(FDCAN_HandleTypeDef *hfdcan, const FDCAN_FilterTypeDef *sFilterConfig) +{ + uint32_t FilterElementW1; + uint32_t FilterElementW2; + uint32_t *FilterAddress; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(sFilterConfig->IdType)); + assert_param(IS_FDCAN_FILTER_CFG(sFilterConfig->FilterConfig)); + + if (sFilterConfig->IdType == FDCAN_STANDARD_ID) + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.StdFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x7FFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x7FFU)); + assert_param(IS_FDCAN_STD_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build filter element */ + FilterElementW1 = ((sFilterConfig->FilterType << 30U) | + (sFilterConfig->FilterConfig << 27U) | + (sFilterConfig->FilterID1 << 16U) | + sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.StandardFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLS_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + } + else /* sFilterConfig->IdType == FDCAN_EXTENDED_ID */ + { + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterIndex, (hfdcan->Init.ExtFiltersNbr - 1U))); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID1, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_MAX_VALUE(sFilterConfig->FilterID2, 0x1FFFFFFFU)); + assert_param(IS_FDCAN_EXT_FILTER_TYPE(sFilterConfig->FilterType)); + + /* Build first word of filter element */ + FilterElementW1 = ((sFilterConfig->FilterConfig << 29U) | sFilterConfig->FilterID1); + + /* Build second word of filter element */ + FilterElementW2 = ((sFilterConfig->FilterType << 30U) | sFilterConfig->FilterID2); + + /* Calculate filter address */ + FilterAddress = (uint32_t *)(hfdcan->msgRam.ExtendedFilterSA + (sFilterConfig->FilterIndex * SRAMCAN_FLE_SIZE)); + + /* Write filter element to the message RAM */ + *FilterAddress = FilterElementW1; + FilterAddress++; + *FilterAddress = FilterElementW2; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the FDCAN global filter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param NonMatchingStd Defines how received messages with 11-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param NonMatchingExt Defines how received messages with 29-bit IDs that + * do not match any element of the filter list are treated. + * This parameter can be a value of @arg FDCAN_Non_Matching_Frames. + * @param RejectRemoteStd Filter or reject all the remote 11-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @param RejectRemoteExt Filter or reject all the remote 29-bit IDs frames. + * This parameter can be a value of @arg FDCAN_Reject_Remote_Frames. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigGlobalFilter(FDCAN_HandleTypeDef *hfdcan, + uint32_t NonMatchingStd, + uint32_t NonMatchingExt, + uint32_t RejectRemoteStd, + uint32_t RejectRemoteExt) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingStd)); + assert_param(IS_FDCAN_NON_MATCHING(NonMatchingExt)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteStd)); + assert_param(IS_FDCAN_REJECT_REMOTE(RejectRemoteExt)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure global filter */ + MODIFY_REG(hfdcan->Instance->RXGFC, (FDCAN_RXGFC_ANFS | + FDCAN_RXGFC_ANFE | + FDCAN_RXGFC_RRFS | + FDCAN_RXGFC_RRFE), + ((NonMatchingStd << FDCAN_RXGFC_ANFS_Pos) | + (NonMatchingExt << FDCAN_RXGFC_ANFE_Pos) | + (RejectRemoteStd << FDCAN_RXGFC_RRFS_Pos) | + (RejectRemoteExt << FDCAN_RXGFC_RRFE_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the extended ID mask. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param Mask Extended ID Mask. + * This parameter must be a number between 0 and 0x1FFFFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigExtendedIdMask(FDCAN_HandleTypeDef *hfdcan, uint32_t Mask) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(Mask, 0x1FFFFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the extended ID mask */ + hfdcan->Instance->XIDAM = Mask; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the Rx FIFO operation mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @param OperationMode operation mode. + * This parameter can be a value of @arg FDCAN_Rx_FIFO_operation_mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRxFifoOverwrite(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo, uint32_t OperationMode) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + assert_param(IS_FDCAN_RX_FIFO_MODE(OperationMode)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + if (RxFifo == FDCAN_RX_FIFO0) + { + /* Select FIFO 0 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F0OM, (OperationMode << FDCAN_RXGFC_F0OM_Pos)); + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + /* Select FIFO 1 Operation Mode */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_F1OM, (OperationMode << FDCAN_RXGFC_F1OM_Pos)); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the RAM watchdog. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param CounterStartValue Start value of the Message RAM Watchdog Counter, + * This parameter must be a number between 0x00 and 0xFF, + * with the reset value of 0x00 the counter is disabled. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigRamWatchdog(FDCAN_HandleTypeDef *hfdcan, uint32_t CounterStartValue) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(CounterStartValue, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure the RAM watchdog counter start value */ + MODIFY_REG(hfdcan->Instance->RWD, FDCAN_RWD_WDC, CounterStartValue); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampPrescaler Timestamp Counter Prescaler. + * This parameter can be a value of @arg FDCAN_Timestamp_Prescaler. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampPrescaler) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP_PRESCALER(TimestampPrescaler)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure prescaler */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TCP, TimestampPrescaler); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimestampOperation Timestamp counter operation. + * This parameter can be a value of @arg FDCAN_Timestamp. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimestampCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimestampOperation) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMESTAMP(TimestampOperation)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timestamp counter */ + MODIFY_REG(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS, TimestampOperation); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timestamp counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timestamp counter */ + CLEAR_BIT(hfdcan->Instance->TSCC, FDCAN_TSCC_TSS); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timestamp counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timestamp counter value + */ +uint16_t HAL_FDCAN_GetTimestampCounter(const FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TSCV); +} + +/** + * @brief Reset the timestamp counter to zero. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimestampCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TSCC & FDCAN_TSCC_TSS) != FDCAN_TIMESTAMP_EXTERNAL) + { + /* Reset timestamp counter. + Actually any write operation to TSCV clears the counter */ + CLEAR_REG(hfdcan->Instance->TSCV); + } + else + { + /* Update error code. + Unable to reset external counter */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TimeoutOperation Timeout counter operation. + * This parameter can be a value of @arg FDCAN_Timeout_Operation. + * @param TimeoutPeriod Start value of the timeout down-counter. + * This parameter must be a number between 0x0000 and 0xFFFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTimeoutCounter(FDCAN_HandleTypeDef *hfdcan, uint32_t TimeoutOperation, + uint32_t TimeoutPeriod) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TIMEOUT(TimeoutOperation)); + assert_param(IS_FDCAN_MAX_VALUE(TimeoutPeriod, 0xFFFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Select timeout operation and configure period */ + MODIFY_REG(hfdcan->Instance->TOCC, + (FDCAN_TOCC_TOS | FDCAN_TOCC_TOP), (TimeoutOperation | (TimeoutPeriod << FDCAN_TOCC_TOP_Pos))); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable timeout counter */ + SET_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the timeout counter. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable timeout counter */ + CLEAR_BIT(hfdcan->Instance->TOCC, FDCAN_TOCC_ETOC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Get the timeout counter value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Timeout counter value + */ +uint16_t HAL_FDCAN_GetTimeoutCounter(const FDCAN_HandleTypeDef *hfdcan) +{ + return (uint16_t)(hfdcan->Instance->TOCV); +} + +/** + * @brief Reset the timeout counter to its start value. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ResetTimeoutCounter(FDCAN_HandleTypeDef *hfdcan) +{ + if ((hfdcan->Instance->TOCC & FDCAN_TOCC_TOS) == FDCAN_TIMEOUT_CONTINUOUS) + { + /* Reset timeout counter to start value */ + CLEAR_REG(hfdcan->Instance->TOCV); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code. + Unable to reset counter: controlled only by FIFO empty state */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_SUPPORTED; + + return HAL_ERROR; + } +} + +/** + * @brief Configure the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TdcOffset Transmitter Delay Compensation Offset. + * This parameter must be a number between 0x00 and 0x7F. + * @param TdcFilter Transmitter Delay Compensation Filter Window Length. + * This parameter must be a number between 0x00 and 0x7F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan, uint32_t TdcOffset, + uint32_t TdcFilter) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_MAX_VALUE(TdcOffset, 0x7FU)); + assert_param(IS_FDCAN_MAX_VALUE(TdcFilter, 0x7FU)); + + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Configure TDC offset and filter window */ + hfdcan->Instance->TDCR = ((TdcFilter << FDCAN_TDCR_TDCF_Pos) | (TdcOffset << FDCAN_TDCR_TDCO_Pos)); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable transmitter delay compensation */ + SET_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable the transmitter delay compensation. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableTxDelayCompensation(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable transmitter delay compensation */ + CLEAR_BIT(hfdcan->Instance->DBTP, FDCAN_DBTP_TDC); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable ISO 11898-1 protocol mode. + * CAN FD frame format is according to ISO 11898-1 standard. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable Non ISO protocol mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable ISO 11898-1 protocol mode. + * CAN FD frame format is according to Bosch CAN FD specification V1.0. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableISOMode(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable Non ISO protocol mode */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_NISO); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Enable edge filtering during bus integration. + * Two consecutive dominant tq are required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_EnableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Enable edge filtering */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Disable edge filtering during bus integration. + * One dominant tq is required to detect an edge for hard synchronization. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DisableEdgeFiltering(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Disable edge filtering */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_EFBI); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_Start : Start the FDCAN module + (+) HAL_FDCAN_Stop : Stop the FDCAN module and enable access to configuration registers + (+) HAL_FDCAN_AddMessageToTxFifoQ : Add a message to the Tx FIFO/Queue and activate the corresponding + transmission request + (+) HAL_FDCAN_GetLatestTxFifoQRequestBuffer : Get Tx buffer index of latest Tx FIFO/Queue request + (+) HAL_FDCAN_AbortTxRequest : Abort transmission request + (+) HAL_FDCAN_GetRxMessage : Get an FDCAN frame from the Rx FIFO zone into the message RAM + (+) HAL_FDCAN_GetTxEvent : Get an FDCAN Tx event from the Tx Event FIFO zone + into the message RAM + (+) HAL_FDCAN_GetHighPriorityMessageStatus : Get high priority message status + (+) HAL_FDCAN_GetProtocolStatus : Get protocol status + (+) HAL_FDCAN_GetErrorCounters : Get error counter values + (+) HAL_FDCAN_IsTxBufferMessagePending : Check if a transmission request is pending + on the selected Tx buffer + (+) HAL_FDCAN_GetRxFifoFillLevel : Return Rx FIFO fill level + (+) HAL_FDCAN_GetTxFifoFreeLevel : Return Tx FIFO free level + (+) HAL_FDCAN_IsRestrictedOperationMode : Check if the FDCAN peripheral entered Restricted Operation Mode + (+) HAL_FDCAN_ExitRestrictedOperationMode : Exit Restricted Operation Mode + +@endverbatim + * @{ + */ + +/** + * @brief Start the FDCAN module. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Start(FDCAN_HandleTypeDef *hfdcan) +{ + if (hfdcan->State == HAL_FDCAN_STATE_READY) + { + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_BUSY; + + /* Request leave initialisation */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Reset the FDCAN ErrorCode */ + hfdcan->ErrorCode = HAL_FDCAN_ERROR_NONE; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_READY; + + return HAL_ERROR; + } +} + +/** + * @brief Stop the FDCAN module and enable access to configuration registers. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_Stop(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t Counter = 0U; + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Request initialisation */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_INIT); + + /* Wait until the INIT bit into CCCR register is set */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_INIT) == 0U) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Reset counter */ + Counter = 0U; + + /* Exit from Sleep mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CSR); + + /* Wait until FDCAN exits sleep mode */ + while ((hfdcan->Instance->CCCR & FDCAN_CCCR_CSA) == FDCAN_CCCR_CSA) + { + /* Check for the Timeout */ + if (Counter > FDCAN_TIMEOUT_VALUE) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_TIMEOUT; + + /* Change FDCAN state */ + hfdcan->State = HAL_FDCAN_STATE_ERROR; + + return HAL_ERROR; + } + + /* Increment counter */ + Counter++; + } + + /* Enable configuration change */ + SET_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_CCE); + + /* Reset Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = 0U; + + /* Change FDCAN peripheral state */ + hfdcan->State = HAL_FDCAN_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Add a message to the Tx FIFO/Queue and activate the corresponding transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AddMessageToTxFifoQ(FDCAN_HandleTypeDef *hfdcan, const FDCAN_TxHeaderTypeDef *pTxHeader, + const uint8_t *pTxData) +{ + uint32_t PutIndex; + + /* Check function parameters */ + assert_param(IS_FDCAN_ID_TYPE(pTxHeader->IdType)); + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x7FFU)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->Identifier, 0x1FFFFFFFU)); + } + assert_param(IS_FDCAN_FRAME_TYPE(pTxHeader->TxFrameType)); + assert_param(IS_FDCAN_DLC(pTxHeader->DataLength)); + assert_param(IS_FDCAN_ESI(pTxHeader->ErrorStateIndicator)); + assert_param(IS_FDCAN_BRS(pTxHeader->BitRateSwitch)); + assert_param(IS_FDCAN_FDF(pTxHeader->FDFormat)); + assert_param(IS_FDCAN_EFC(pTxHeader->TxEventFifoControl)); + assert_param(IS_FDCAN_MAX_VALUE(pTxHeader->MessageMarker, 0xFFU)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx FIFO/Queue is not full */ + if ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQF) != 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_FULL; + + return HAL_ERROR; + } + else + { + /* Retrieve the Tx FIFO PutIndex */ + PutIndex = ((hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFQPI) >> FDCAN_TXFQS_TFQPI_Pos); + + /* Add the message to the Tx FIFO/Queue */ + FDCAN_CopyMessageToRAM(hfdcan, pTxHeader, pTxData, PutIndex); + + /* Activate the corresponding transmission request */ + hfdcan->Instance->TXBAR = ((uint32_t)1 << PutIndex); + + /* Store the Latest Tx FIFO/Queue Request Buffer Index */ + hfdcan->LatestTxFifoQRequest = ((uint32_t)1 << PutIndex); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get Tx buffer index of latest Tx FIFO/Queue request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx buffer index of last Tx FIFO/Queue request + * - Any value of @arg FDCAN_Tx_location if Tx request has been submitted. + * - 0 if no Tx FIFO/Queue request have been submitted. + */ +uint32_t HAL_FDCAN_GetLatestTxFifoQRequestBuffer(const FDCAN_HandleTypeDef *hfdcan) +{ + /* Return Last Tx FIFO/Queue Request Buffer */ + return hfdcan->LatestTxFifoQRequest; +} + +/** + * @brief Abort transmission request + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndex buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_AbortTxRequest(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndex)); + + if (hfdcan->State == HAL_FDCAN_STATE_BUSY) + { + /* Add cancellation request */ + hfdcan->Instance->TXBCR = BufferIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN frame from the Rx FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxLocation Location of the received message to be read. + * This parameter can be a value of @arg FDCAN_Rx_location. + * @param pRxHeader pointer to a FDCAN_RxHeaderTypeDef structure. + * @param pRxData pointer to a buffer where the payload of the Rx frame will be stored. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetRxMessage(FDCAN_HandleTypeDef *hfdcan, uint32_t RxLocation, + FDCAN_RxHeaderTypeDef *pRxHeader, uint8_t *pRxData) +{ + uint32_t *RxAddress; + uint8_t *pData; + uint32_t ByteCounter; + uint32_t GetIndex = 0; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxLocation)); + + if (state == HAL_FDCAN_STATE_BUSY) + { + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Check that the Rx FIFO 0 is not empty */ + if ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Check that the Rx FIFO 0 is full & overwrite mode is on */ + if (((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0F) >> FDCAN_RXF0S_F0F_Pos) == 1U) + { + if (((hfdcan->Instance->RXGFC & FDCAN_RXGFC_F0OM) >> FDCAN_RXGFC_F0OM_Pos) == FDCAN_RX_FIFO_OVERWRITE) + { + /* When overwrite status is on discard first message in FIFO */ + GetIndex = 1U; + } + } + + /* Calculate Rx FIFO 0 element index */ + GetIndex += ((hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0GI) >> FDCAN_RXF0S_F0GI_Pos); + + /* Calculate Rx FIFO 0 element address */ + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO0SA + (GetIndex * SRAMCAN_RF0_SIZE)); + } + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Check that the Rx FIFO 1 is not empty */ + if ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + else + { + /* Check that the Rx FIFO 1 is full & overwrite mode is on */ + if (((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1F) >> FDCAN_RXF1S_F1F_Pos) == 1U) + { + if (((hfdcan->Instance->RXGFC & FDCAN_RXGFC_F1OM) >> FDCAN_RXGFC_F1OM_Pos) == FDCAN_RX_FIFO_OVERWRITE) + { + /* When overwrite status is on discard first message in FIFO */ + GetIndex = 1U; + } + } + + /* Calculate Rx FIFO 1 element index */ + GetIndex += ((hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1GI) >> FDCAN_RXF1S_F1GI_Pos); + /* Calculate Rx FIFO 1 element address */ + RxAddress = (uint32_t *)(hfdcan->msgRam.RxFIFO1SA + (GetIndex * SRAMCAN_RF1_SIZE)); + } + } + + /* Retrieve IdType */ + pRxHeader->IdType = *RxAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pRxHeader->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pRxHeader->Identifier = ((*RxAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pRxHeader->Identifier = (*RxAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve RxFrameType */ + pRxHeader->RxFrameType = (*RxAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pRxHeader->ErrorStateIndicator = (*RxAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment RxAddress pointer to second word of Rx FIFO element */ + RxAddress++; + + /* Retrieve RxTimestamp */ + pRxHeader->RxTimestamp = (*RxAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pRxHeader->DataLength = ((*RxAddress & FDCAN_ELEMENT_MASK_DLC) >> 16U); + + /* Retrieve BitRateSwitch */ + pRxHeader->BitRateSwitch = (*RxAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pRxHeader->FDFormat = (*RxAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve FilterIndex */ + pRxHeader->FilterIndex = ((*RxAddress & FDCAN_ELEMENT_MASK_FIDX) >> 24U); + + /* Retrieve NonMatchingFrame */ + pRxHeader->IsFilterMatchingFrame = ((*RxAddress & FDCAN_ELEMENT_MASK_ANMF) >> 31U); + + /* Increment RxAddress pointer to payload of Rx FIFO element */ + RxAddress++; + + /* Retrieve Rx payload */ + pData = (uint8_t *)RxAddress; + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pRxHeader->DataLength]; ByteCounter++) + { + pRxData[ByteCounter] = pData[ByteCounter]; + } + + if (RxLocation == FDCAN_RX_FIFO0) /* Rx element is assigned to the Rx FIFO 0 */ + { + /* Acknowledge the Rx FIFO 0 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF0A = GetIndex; + } + else /* Rx element is assigned to the Rx FIFO 1 */ + { + /* Acknowledge the Rx FIFO 1 that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->RXF1A = GetIndex; + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get an FDCAN Tx event from the Tx Event FIFO zone into the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxEvent pointer to a FDCAN_TxEventFifoTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetTxEvent(FDCAN_HandleTypeDef *hfdcan, FDCAN_TxEventFifoTypeDef *pTxEvent) +{ + uint32_t *TxEventAddress; + uint32_t GetIndex; + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if (state == HAL_FDCAN_STATE_BUSY) + { + /* Check that the Tx event FIFO is not empty */ + if ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFFL) == 0U) + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_FIFO_EMPTY; + + return HAL_ERROR; + } + + /* Calculate Tx event FIFO element address */ + GetIndex = ((hfdcan->Instance->TXEFS & FDCAN_TXEFS_EFGI) >> FDCAN_TXEFS_EFGI_Pos); + TxEventAddress = (uint32_t *)(hfdcan->msgRam.TxEventFIFOSA + (GetIndex * SRAMCAN_TEF_SIZE)); + + /* Retrieve IdType */ + pTxEvent->IdType = *TxEventAddress & FDCAN_ELEMENT_MASK_XTD; + + /* Retrieve Identifier */ + if (pTxEvent->IdType == FDCAN_STANDARD_ID) /* Standard ID element */ + { + pTxEvent->Identifier = ((*TxEventAddress & FDCAN_ELEMENT_MASK_STDID) >> 18U); + } + else /* Extended ID element */ + { + pTxEvent->Identifier = (*TxEventAddress & FDCAN_ELEMENT_MASK_EXTID); + } + + /* Retrieve TxFrameType */ + pTxEvent->TxFrameType = (*TxEventAddress & FDCAN_ELEMENT_MASK_RTR); + + /* Retrieve ErrorStateIndicator */ + pTxEvent->ErrorStateIndicator = (*TxEventAddress & FDCAN_ELEMENT_MASK_ESI); + + /* Increment TxEventAddress pointer to second word of Tx Event FIFO element */ + TxEventAddress++; + + /* Retrieve TxTimestamp */ + pTxEvent->TxTimestamp = (*TxEventAddress & FDCAN_ELEMENT_MASK_TS); + + /* Retrieve DataLength */ + pTxEvent->DataLength = ((*TxEventAddress & FDCAN_ELEMENT_MASK_DLC) >> 16U); + + /* Retrieve BitRateSwitch */ + pTxEvent->BitRateSwitch = (*TxEventAddress & FDCAN_ELEMENT_MASK_BRS); + + /* Retrieve FDFormat */ + pTxEvent->FDFormat = (*TxEventAddress & FDCAN_ELEMENT_MASK_FDF); + + /* Retrieve EventType */ + pTxEvent->EventType = (*TxEventAddress & FDCAN_ELEMENT_MASK_ET); + + /* Retrieve MessageMarker */ + pTxEvent->MessageMarker = ((*TxEventAddress & FDCAN_ELEMENT_MASK_MM) >> 24U); + + /* Acknowledge the Tx Event FIFO that the oldest element is read so that it increments the GetIndex */ + hfdcan->Instance->TXEFA = GetIndex; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_STARTED; + + return HAL_ERROR; + } +} + +/** + * @brief Get high priority message status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param HpMsgStatus pointer to an FDCAN_HpMsgStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetHighPriorityMessageStatus(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_HpMsgStatusTypeDef *HpMsgStatus) +{ + HpMsgStatus->FilterList = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FLST) >> FDCAN_HPMS_FLST_Pos); + HpMsgStatus->FilterIndex = ((hfdcan->Instance->HPMS & FDCAN_HPMS_FIDX) >> FDCAN_HPMS_FIDX_Pos); + HpMsgStatus->MessageStorage = (hfdcan->Instance->HPMS & FDCAN_HPMS_MSI); + HpMsgStatus->MessageIndex = (hfdcan->Instance->HPMS & FDCAN_HPMS_BIDX); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get protocol status. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ProtocolStatus pointer to an FDCAN_ProtocolStatusTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetProtocolStatus(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_ProtocolStatusTypeDef *ProtocolStatus) +{ + uint32_t StatusReg; + + /* Read the protocol status register */ + StatusReg = READ_REG(hfdcan->Instance->PSR); + + /* Fill the protocol status structure */ + ProtocolStatus->LastErrorCode = (StatusReg & FDCAN_PSR_LEC); + ProtocolStatus->DataLastErrorCode = ((StatusReg & FDCAN_PSR_DLEC) >> FDCAN_PSR_DLEC_Pos); + ProtocolStatus->Activity = (StatusReg & FDCAN_PSR_ACT); + ProtocolStatus->ErrorPassive = ((StatusReg & FDCAN_PSR_EP) >> FDCAN_PSR_EP_Pos); + ProtocolStatus->Warning = ((StatusReg & FDCAN_PSR_EW) >> FDCAN_PSR_EW_Pos); + ProtocolStatus->BusOff = ((StatusReg & FDCAN_PSR_BO) >> FDCAN_PSR_BO_Pos); + ProtocolStatus->RxESIflag = ((StatusReg & FDCAN_PSR_RESI) >> FDCAN_PSR_RESI_Pos); + ProtocolStatus->RxBRSflag = ((StatusReg & FDCAN_PSR_RBRS) >> FDCAN_PSR_RBRS_Pos); + ProtocolStatus->RxFDFflag = ((StatusReg & FDCAN_PSR_REDL) >> FDCAN_PSR_REDL_Pos); + ProtocolStatus->ProtocolException = ((StatusReg & FDCAN_PSR_PXE) >> FDCAN_PSR_PXE_Pos); + ProtocolStatus->TDCvalue = ((StatusReg & FDCAN_PSR_TDCV) >> FDCAN_PSR_TDCV_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get error counter values. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorCounters pointer to an FDCAN_ErrorCountersTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_GetErrorCounters(const FDCAN_HandleTypeDef *hfdcan, + FDCAN_ErrorCountersTypeDef *ErrorCounters) +{ + uint32_t CountersReg; + + /* Read the error counters register */ + CountersReg = READ_REG(hfdcan->Instance->ECR); + + /* Fill the error counters structure */ + ErrorCounters->TxErrorCnt = ((CountersReg & FDCAN_ECR_TEC) >> FDCAN_ECR_TEC_Pos); + ErrorCounters->RxErrorCnt = ((CountersReg & FDCAN_ECR_REC) >> FDCAN_ECR_REC_Pos); + ErrorCounters->RxErrorPassive = ((CountersReg & FDCAN_ECR_RP) >> FDCAN_ECR_RP_Pos); + ErrorCounters->ErrorLogging = ((CountersReg & FDCAN_ECR_CEL) >> FDCAN_ECR_CEL_Pos); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Check if a transmission request is pending on the selected Tx buffer. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxBufferIndex Tx buffer index. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval Status + * - 0 : No pending transmission request on TxBufferIndex list. + * - 1 : Pending transmission request on TxBufferIndex. + */ +uint32_t HAL_FDCAN_IsTxBufferMessagePending(const FDCAN_HandleTypeDef *hfdcan, uint32_t TxBufferIndex) +{ + /* Check function parameters */ + assert_param(IS_FDCAN_TX_LOCATION_LIST(TxBufferIndex)); + + /* Check pending transmission request on the selected buffer */ + if ((hfdcan->Instance->TXBRP & TxBufferIndex) == 0U) + { + return 0; + } + return 1; +} + +/** + * @brief Return Rx FIFO fill level. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo Rx FIFO. + * This parameter can be one of the following values: + * @arg FDCAN_RX_FIFO0: Rx FIFO 0 + * @arg FDCAN_RX_FIFO1: Rx FIFO 1 + * @retval Rx FIFO fill level. + */ +uint32_t HAL_FDCAN_GetRxFifoFillLevel(const FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo) +{ + uint32_t FillLevel; + + /* Check function parameters */ + assert_param(IS_FDCAN_RX_FIFO(RxFifo)); + + if (RxFifo == FDCAN_RX_FIFO0) + { + FillLevel = hfdcan->Instance->RXF0S & FDCAN_RXF0S_F0FL; + } + else /* RxFifo == FDCAN_RX_FIFO1 */ + { + FillLevel = hfdcan->Instance->RXF1S & FDCAN_RXF1S_F1FL; + } + + /* Return Rx FIFO fill level */ + return FillLevel; +} + +/** + * @brief Return Tx FIFO free level: number of consecutive free Tx FIFO + * elements starting from Tx FIFO GetIndex. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Tx FIFO free level. + */ +uint32_t HAL_FDCAN_GetTxFifoFreeLevel(const FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t FreeLevel; + + FreeLevel = hfdcan->Instance->TXFQS & FDCAN_TXFQS_TFFL; + + /* Return Tx FIFO free level */ + return FreeLevel; +} + +/** + * @brief Check if the FDCAN peripheral entered Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval Status + * - 0 : Normal FDCAN operation. + * - 1 : Restricted Operation Mode active. + */ +uint32_t HAL_FDCAN_IsRestrictedOperationMode(const FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t OperationMode; + + /* Get Operation Mode */ + OperationMode = ((hfdcan->Instance->CCCR & FDCAN_CCCR_ASM) >> FDCAN_CCCR_ASM_Pos); + + return OperationMode; +} + +/** + * @brief Exit Restricted Operation Mode. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ExitRestrictedOperationMode(FDCAN_HandleTypeDef *hfdcan) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Exit Restricted Operation mode */ + CLEAR_BIT(hfdcan->Instance->CCCR, FDCAN_CCCR_ASM); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group4 Interrupts management + * @brief Interrupts management + * +@verbatim + ============================================================================== + ##### Interrupts management ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_FDCAN_ConfigInterruptLines : Assign interrupts to either Interrupt line 0 or 1 + (+) HAL_FDCAN_ActivateNotification : Enable interrupts + (+) HAL_FDCAN_DeactivateNotification : Disable interrupts + (+) HAL_FDCAN_IRQHandler : Handles FDCAN interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Assign interrupts to either Interrupt line 0 or 1. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ITList indicates which interrupts group will be assigned to the selected interrupt line. + * This parameter can be any combination of @arg FDCAN_Interrupts_Group. + * @param InterruptLine Interrupt line. + * This parameter can be a value of @arg FDCAN_Interrupt_Line. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ConfigInterruptLines(FDCAN_HandleTypeDef *hfdcan, uint32_t ITList, uint32_t InterruptLine) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT_GROUP(ITList)); + assert_param(IS_FDCAN_IT_LINE(InterruptLine)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Assign list of interrupts to the selected line */ + if (InterruptLine == FDCAN_INTERRUPT_LINE0) + { + CLEAR_BIT(hfdcan->Instance->ILS, ITList); + } + else /* InterruptLine == FDCAN_INTERRUPT_LINE1 */ + { + SET_BIT(hfdcan->Instance->ILS, ITList); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Enable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ActiveITs indicates which interrupts will be enabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @param BufferIndexes Tx Buffer Indexes. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * This parameter is ignored if ActiveITs does not include one of the following: + * - FDCAN_IT_TX_COMPLETE + * - FDCAN_IT_TX_ABORT_COMPLETE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_ActivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t ActiveITs, + uint32_t BufferIndexes) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(ActiveITs)); + if ((ActiveITs & (FDCAN_IT_TX_COMPLETE | FDCAN_IT_TX_ABORT_COMPLETE)) != 0U) + { + assert_param(IS_FDCAN_TX_LOCATION_LIST(BufferIndexes)); + } + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Get interrupts line selection */ + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Enable Interrupt lines */ + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Enable Interrupt line 0 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + if ((((ActiveITs & FDCAN_IT_LIST_RX_FIFO0) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_RX_FIFO1) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_SMSG) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_MISC) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ActiveITs & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Enable Interrupt line 1 */ + SET_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + if ((ActiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Enable Tx Buffer Transmission Interrupt to set TC flag in IR register, + but interrupt will only occur if TC is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBTIE, BufferIndexes); + } + + if ((ActiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Enable Tx Buffer Cancellation Finished Interrupt to set TCF flag in IR register, + but interrupt will only occur if TCF is enabled in IE register */ + SET_BIT(hfdcan->Instance->TXBCIE, BufferIndexes); + } + + /* Enable the selected interrupts */ + __HAL_FDCAN_ENABLE_IT(hfdcan, ActiveITs); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Disable interrupts. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param InactiveITs indicates which interrupts will be disabled. + * This parameter can be any combination of @arg FDCAN_Interrupts. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FDCAN_DeactivateNotification(FDCAN_HandleTypeDef *hfdcan, uint32_t InactiveITs) +{ + HAL_FDCAN_StateTypeDef state = hfdcan->State; + uint32_t ITs_enabled; + uint32_t ITs_lines_selection; + + /* Check function parameters */ + assert_param(IS_FDCAN_IT(InactiveITs)); + + if ((state == HAL_FDCAN_STATE_READY) || (state == HAL_FDCAN_STATE_BUSY)) + { + /* Disable the selected interrupts */ + __HAL_FDCAN_DISABLE_IT(hfdcan, InactiveITs); + + if ((InactiveITs & FDCAN_IT_TX_COMPLETE) != 0U) + { + /* Disable Tx Buffer Transmission Interrupts */ + CLEAR_REG(hfdcan->Instance->TXBTIE); + } + + if ((InactiveITs & FDCAN_IT_TX_ABORT_COMPLETE) != 0U) + { + /* Disable Tx Buffer Cancellation Finished Interrupt */ + CLEAR_REG(hfdcan->Instance->TXBCIE); + } + + /* Get interrupts enabled and interrupts line selection */ + ITs_enabled = hfdcan->Instance->IE; + ITs_lines_selection = hfdcan->Instance->ILS; + + /* Check if some interrupts are still enabled on interrupt line 0 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) == 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) == 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 0 */ + { + /* Disable interrupt line 0 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE0); + } + + /* Check if some interrupts are still enabled on interrupt line 1 */ + if ((((ITs_enabled & FDCAN_IT_LIST_RX_FIFO0) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO0) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_RX_FIFO1) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_RX_FIFO1) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_SMSG) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_SMSG) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_TX_FIFO_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_TX_FIFO_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_MISC) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_MISC) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_BIT_LINE_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_BIT_LINE_ERROR) != 0U)) || \ + (((ITs_enabled & FDCAN_IT_LIST_PROTOCOL_ERROR) != 0U) + && (((ITs_lines_selection) & FDCAN_IT_GROUP_PROTOCOL_ERROR) != 0U))) + { + /* Do nothing */ + } + else /* no more interrupts enabled on interrupt line 1 */ + { + /* Disable interrupt line 1 */ + CLEAR_BIT(hfdcan->Instance->ILE, FDCAN_INTERRUPT_LINE1); + } + + /* Return function status */ + return HAL_OK; + } + else + { + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_NOT_INITIALIZED; + + return HAL_ERROR; + } +} + +/** + * @brief Handles FDCAN interrupt request. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL status + */ +void HAL_FDCAN_IRQHandler(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t TxEventFifoITs; + uint32_t RxFifo0ITs; + uint32_t RxFifo1ITs; + uint32_t Errors; + uint32_t ErrorStatusITs; + uint32_t TransmittedBuffers; + uint32_t AbortedBuffers; + uint32_t itsource; + uint32_t itflag; + + TxEventFifoITs = hfdcan->Instance->IR & FDCAN_TX_EVENT_FIFO_MASK; + TxEventFifoITs &= hfdcan->Instance->IE; + RxFifo0ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO0_MASK; + RxFifo0ITs &= hfdcan->Instance->IE; + RxFifo1ITs = hfdcan->Instance->IR & FDCAN_RX_FIFO1_MASK; + RxFifo1ITs &= hfdcan->Instance->IE; + Errors = hfdcan->Instance->IR & FDCAN_ERROR_MASK; + Errors &= hfdcan->Instance->IE; + ErrorStatusITs = hfdcan->Instance->IR & FDCAN_ERROR_STATUS_MASK; + ErrorStatusITs &= hfdcan->Instance->IE; + itsource = hfdcan->Instance->IE; + itflag = hfdcan->Instance->IR; + + /* High Priority Message interrupt management *******************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_RX_HIGH_PRIORITY_MSG) != RESET) + { + /* Clear the High Priority Message flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RX_HIGH_PRIORITY_MSG); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->HighPriorityMessageCallback(hfdcan); +#else + /* High Priority Message Callback */ + HAL_FDCAN_HighPriorityMessageCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Abort interrupt management **********************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_TX_ABORT_COMPLETE) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_TX_ABORT_COMPLETE) != RESET) + { + /* List of aborted monitored buffers */ + AbortedBuffers = hfdcan->Instance->TXBCF; + AbortedBuffers &= hfdcan->Instance->TXBCIE; + + /* Clear the Transmission Cancellation flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_ABORT_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferAbortCallback(hfdcan, AbortedBuffers); +#else + /* Transmission Cancellation Callback */ + HAL_FDCAN_TxBufferAbortCallback(hfdcan, AbortedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Tx event FIFO interrupts management **************************************/ + if (TxEventFifoITs != 0U) + { + /* Clear the Tx Event FIFO flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, TxEventFifoITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxEventFifoCallback(hfdcan, TxEventFifoITs); +#else + /* Tx Event FIFO Callback */ + HAL_FDCAN_TxEventFifoCallback(hfdcan, TxEventFifoITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 0 interrupts management ******************************************/ + if (RxFifo0ITs != 0U) + { + /* Clear the Rx FIFO 0 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo0ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo0Callback(hfdcan, RxFifo0ITs); +#else + /* Rx FIFO 0 Callback */ + HAL_FDCAN_RxFifo0Callback(hfdcan, RxFifo0ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Rx FIFO 1 interrupts management ******************************************/ + if (RxFifo1ITs != 0U) + { + /* Clear the Rx FIFO 1 flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, RxFifo1ITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->RxFifo1Callback(hfdcan, RxFifo1ITs); +#else + /* Rx FIFO 1 Callback */ + HAL_FDCAN_RxFifo1Callback(hfdcan, RxFifo1ITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Tx FIFO empty interrupt management ***************************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_TX_FIFO_EMPTY) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_TX_FIFO_EMPTY) != RESET) + { + /* Clear the Tx FIFO empty flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_FIFO_EMPTY); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxFifoEmptyCallback(hfdcan); +#else + /* Tx FIFO empty Callback */ + HAL_FDCAN_TxFifoEmptyCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Transmission Complete interrupt management *******************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_TX_COMPLETE) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_TX_COMPLETE) != RESET) + { + /* List of transmitted monitored buffers */ + TransmittedBuffers = hfdcan->Instance->TXBTO; + TransmittedBuffers &= hfdcan->Instance->TXBTIE; + + /* Clear the Transmission Complete flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TX_COMPLETE); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#else + /* Transmission Complete Callback */ + HAL_FDCAN_TxBufferCompleteCallback(hfdcan, TransmittedBuffers); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timestamp Wraparound interrupt management ********************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_TIMESTAMP_WRAPAROUND) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_TIMESTAMP_WRAPAROUND) != RESET) + { + /* Clear the Timestamp Wraparound flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMESTAMP_WRAPAROUND); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimestampWraparoundCallback(hfdcan); +#else + /* Timestamp Wraparound Callback */ + HAL_FDCAN_TimestampWraparoundCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Timeout Occurred interrupt management ************************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_TIMEOUT_OCCURRED) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_TIMEOUT_OCCURRED) != RESET) + { + /* Clear the Timeout Occurred flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_TIMEOUT_OCCURRED); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->TimeoutOccurredCallback(hfdcan); +#else + /* Timeout Occurred Callback */ + HAL_FDCAN_TimeoutOccurredCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + } + + /* Message RAM access failure interrupt management **************************/ + if (FDCAN_CHECK_FLAG(itflag, FDCAN_FLAG_RAM_ACCESS_FAILURE) != RESET) + { + if (FDCAN_CHECK_IT_SOURCE(itsource, FDCAN_IT_RAM_ACCESS_FAILURE) != RESET) + { + /* Clear the Message RAM access failure flag */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, FDCAN_FLAG_RAM_ACCESS_FAILURE); + + /* Update error code */ + hfdcan->ErrorCode |= HAL_FDCAN_ERROR_RAM_ACCESS; + } + } + + /* Error Status interrupts management ***************************************/ + if (ErrorStatusITs != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, ErrorStatusITs); + +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorStatusCallback(hfdcan, ErrorStatusITs); +#else + /* Error Status Callback */ + HAL_FDCAN_ErrorStatusCallback(hfdcan, ErrorStatusITs); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } + + /* Error interrupts management **********************************************/ + if (Errors != 0U) + { + /* Clear the Error flags */ + __HAL_FDCAN_CLEAR_FLAG(hfdcan, Errors); + + /* Update error code */ + hfdcan->ErrorCode |= Errors; + } + + if (hfdcan->ErrorCode != HAL_FDCAN_ERROR_NONE) + { +#if USE_HAL_FDCAN_REGISTER_CALLBACKS == 1 + /* Call registered callback*/ + hfdcan->ErrorCallback(hfdcan); +#else + /* Error Callback */ + HAL_FDCAN_ErrorCallback(hfdcan); +#endif /* USE_HAL_FDCAN_REGISTER_CALLBACKS */ + } +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group5 Callback functions + * @brief FDCAN Callback functions + * +@verbatim + ============================================================================== + ##### Callback functions ##### + ============================================================================== + [..] + This subsection provides the following callback functions: + (+) HAL_FDCAN_TxEventFifoCallback + (+) HAL_FDCAN_RxFifo0Callback + (+) HAL_FDCAN_RxFifo1Callback + (+) HAL_FDCAN_TxFifoEmptyCallback + (+) HAL_FDCAN_TxBufferCompleteCallback + (+) HAL_FDCAN_TxBufferAbortCallback + (+) HAL_FDCAN_HighPriorityMessageCallback + (+) HAL_FDCAN_TimestampWraparoundCallback + (+) HAL_FDCAN_TimeoutOccurredCallback + (+) HAL_FDCAN_ErrorCallback + (+) HAL_FDCAN_ErrorStatusCallback + +@endverbatim + * @{ + */ + +/** + * @brief Tx Event callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param TxEventFifoITs indicates which Tx Event FIFO interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Tx_Event_Fifo_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_TxEventFifoCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t TxEventFifoITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(TxEventFifoITs); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxEventFifoCallback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 0 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo0ITs indicates which Rx FIFO 0 interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo0_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo0ITs); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo0Callback could be implemented in the user file + */ +} + +/** + * @brief Rx FIFO 1 callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param RxFifo1ITs indicates which Rx FIFO 1 interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Rx_Fifo1_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(RxFifo1ITs); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_RxFifo1Callback could be implemented in the user file + */ +} + +/** + * @brief Tx FIFO Empty callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TxFifoEmptyCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxFifoEmptyCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Complete callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the transmitted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferCompleteCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferCompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission Cancellation callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param BufferIndexes Indexes of the aborted buffers. + * This parameter can be any combination of @arg FDCAN_Tx_location. + * @retval None + */ +__weak void HAL_FDCAN_TxBufferAbortCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t BufferIndexes) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(BufferIndexes); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TxBufferAbortCallback could be implemented in the user file + */ +} + +/** + * @brief Timestamp Wraparound callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimestampWraparoundCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimestampWraparoundCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout Occurred callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_TimeoutOccurredCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_TimeoutOccurredCallback could be implemented in the user file + */ +} + +/** + * @brief High Priority Message callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_HighPriorityMessageCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_HighPriorityMessageCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval None + */ +__weak void HAL_FDCAN_ErrorCallback(FDCAN_HandleTypeDef *hfdcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Error status callback. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param ErrorStatusITs indicates which Error Status interrupts are signaled. + * This parameter can be any combination of @arg FDCAN_Error_Status_Interrupts. + * @retval None + */ +__weak void HAL_FDCAN_ErrorStatusCallback(FDCAN_HandleTypeDef *hfdcan, uint32_t ErrorStatusITs) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hfdcan); + UNUSED(ErrorStatusITs); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_FDCAN_ErrorStatusCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FDCAN_Exported_Functions_Group6 Peripheral State functions + * @brief FDCAN Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) HAL_FDCAN_GetState() : Return the FDCAN state. + (+) HAL_FDCAN_GetError() : Return the FDCAN error code if any. + +@endverbatim + * @{ + */ +/** + * @brief Return the FDCAN state + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval HAL state + */ +HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(const FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN state */ + return hfdcan->State; +} + +/** + * @brief Return the FDCAN error code + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval FDCAN Error Code + */ +uint32_t HAL_FDCAN_GetError(const FDCAN_HandleTypeDef *hfdcan) +{ + /* Return FDCAN error code */ + return hfdcan->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FDCAN_Private_Functions FDCAN Private Functions + * @{ + */ + +/** + * @brief Calculate each RAM block start address and size + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @retval none + */ +static void FDCAN_CalcultateRamBlockAddresses(FDCAN_HandleTypeDef *hfdcan) +{ + uint32_t RAMcounter; + uint32_t SramCanInstanceBase = SRAMCAN_BASE; + + if (hfdcan->Instance == FDCAN2) + { + SramCanInstanceBase += SRAMCAN_SIZE; + } + + /* Standard filter list start address */ + hfdcan->msgRam.StandardFilterSA = SramCanInstanceBase + SRAMCAN_FLSSA; + + /* Standard filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSS, (hfdcan->Init.StdFiltersNbr << FDCAN_RXGFC_LSS_Pos)); + + /* Extended filter list start address */ + hfdcan->msgRam.ExtendedFilterSA = SramCanInstanceBase + SRAMCAN_FLESA; + + /* Extended filter elements number */ + MODIFY_REG(hfdcan->Instance->RXGFC, FDCAN_RXGFC_LSE, (hfdcan->Init.ExtFiltersNbr << FDCAN_RXGFC_LSE_Pos)); + + /* Rx FIFO 0 start address */ + hfdcan->msgRam.RxFIFO0SA = SramCanInstanceBase + SRAMCAN_RF0SA; + + /* Rx FIFO 1 start address */ + hfdcan->msgRam.RxFIFO1SA = SramCanInstanceBase + SRAMCAN_RF1SA; + + /* Tx event FIFO start address */ + hfdcan->msgRam.TxEventFIFOSA = SramCanInstanceBase + SRAMCAN_TEFSA; + + /* Tx FIFO/queue start address */ + hfdcan->msgRam.TxFIFOQSA = SramCanInstanceBase + SRAMCAN_TFQSA; + + /* Flush the allocated Message RAM area */ + for (RAMcounter = SramCanInstanceBase; RAMcounter < (SramCanInstanceBase + SRAMCAN_SIZE); RAMcounter += 4U) + { + *(uint32_t *)(RAMcounter) = 0x00000000U; + } +} + +/** + * @brief Copy Tx message to the message RAM. + * @param hfdcan pointer to an FDCAN_HandleTypeDef structure that contains + * the configuration information for the specified FDCAN. + * @param pTxHeader pointer to a FDCAN_TxHeaderTypeDef structure. + * @param pTxData pointer to a buffer containing the payload of the Tx frame. + * @param BufferIndex index of the buffer to be configured. + * @retval none + */ +static void FDCAN_CopyMessageToRAM(const FDCAN_HandleTypeDef *hfdcan, const FDCAN_TxHeaderTypeDef *pTxHeader, + const uint8_t *pTxData, uint32_t BufferIndex) +{ + uint32_t TxElementW1; + uint32_t TxElementW2; + uint32_t *TxAddress; + uint32_t ByteCounter; + + /* Build first word of Tx header element */ + if (pTxHeader->IdType == FDCAN_STANDARD_ID) + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_STANDARD_ID | + pTxHeader->TxFrameType | + (pTxHeader->Identifier << 18U)); + } + else /* pTxHeader->IdType == FDCAN_EXTENDED_ID */ + { + TxElementW1 = (pTxHeader->ErrorStateIndicator | + FDCAN_EXTENDED_ID | + pTxHeader->TxFrameType | + pTxHeader->Identifier); + } + + /* Build second word of Tx header element */ + TxElementW2 = ((pTxHeader->MessageMarker << 24U) | + pTxHeader->TxEventFifoControl | + pTxHeader->FDFormat | + pTxHeader->BitRateSwitch | + (pTxHeader->DataLength << 16U)); + + /* Calculate Tx element address */ + TxAddress = (uint32_t *)(hfdcan->msgRam.TxFIFOQSA + (BufferIndex * SRAMCAN_TFQ_SIZE)); + + /* Write Tx element header to the message RAM */ + *TxAddress = TxElementW1; + TxAddress++; + *TxAddress = TxElementW2; + TxAddress++; + + /* Write Tx payload to the message RAM */ + for (ByteCounter = 0; ByteCounter < DLCtoBytes[pTxHeader->DataLength]; ByteCounter += 4U) + { + *TxAddress = (((uint32_t)pTxData[ByteCounter + 3U] << 24U) | + ((uint32_t)pTxData[ByteCounter + 2U] << 16U) | + ((uint32_t)pTxData[ByteCounter + 1U] << 8U) | + (uint32_t)pTxData[ByteCounter]); + TxAddress++; + } +} + +/** + * @} + */ +#endif /* HAL_FDCAN_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* FDCAN1 */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash.c new file mode 100644 index 000000000..732100462 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash.c @@ -0,0 +1,969 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB C-Bus accesses to the Flash memory. + It implements the erase and program Flash memory operations and the read + and write protection mechanisms. + + [..] The Flash memory interface implements the TrustZone security features (TZ) supported + by ARM Cortex-M33 core (CM33). + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) TrustZone aware + (+) Watermark-based area protection including PCROP and secure hide area + (+) Block-based page protection + (+) Error code correction (ECC) : Data in flash are 137-bits word + (9 bits added per quad-word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32H7RSxx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: quad-words and burst program (8 quad-words) + (++) There are two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = 0U, \ + .Address = 0U, \ + .Sector = 0U, \ + .NbSectorsToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_Byte(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_HalfWord(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_Word(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_DoubleWord(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_QuadWord(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_OTPHalfWord(uint32_t Address, uint32_t DataAddress); +static void FLASH_Program_OTPWord(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program a data at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + switch (TypeProgram) + { + case FLASH_TYPEPROGRAM_BYTE: + /* Program a byte (8-bit) at a specified address */ + FLASH_Program_Byte(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_HALFWORD: + /* Program a half-word (16-bit) at a specified address */ + FLASH_Program_HalfWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_WORD: + /* Program a word (32-bit) at a specified address */ + FLASH_Program_Word(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_DOUBLEWORD: + /* Program a double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_QUADWORD: + /* Program a quad-word (128-bit) at a specified address */ + FLASH_Program_QuadWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_OTP_HALFWORD: + /* Program a half-word (16-bit) at a OTP address */ + FLASH_Program_OTPHalfWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_OTP_WORD: + /* Program a word (32-bit) at a OTP address */ + FLASH_Program_OTPWord(Address, DataAddress); + break; + + default: + status = HAL_ERROR; + break; + } + + if (status != HAL_ERROR) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG (and FW Bit in non quad-word mode) */ + CLEAR_BIT(FLASH->CR, (TypeProgram & ~(FLASH_WORD_SIZE_MASK))); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program a data at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = TypeProgram; + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + SET_BIT(FLASH->IER, (FLASH_IT_EOP | FLASH_IT_WRPERR | FLASH_IT_PGSERR | FLASH_IT_STRBERR | FLASH_IT_INCERR)); + + switch (TypeProgram) + { + case FLASH_TYPEPROGRAM_BYTE: + /* Program a byte (8-bit) at a specified address */ + FLASH_Program_Byte(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_HALFWORD: + /* Program a half-word (16-bit) at a specified address */ + FLASH_Program_HalfWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_WORD: + /* Program a word (32-bit) at a specified address */ + FLASH_Program_Word(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_DOUBLEWORD: + /* Program a double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_QUADWORD: + /* Program a quad-word (128-bit) at a specified address */ + FLASH_Program_QuadWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_OTP_HALFWORD: + /* Program a half-word (16-bit) at a OTP address */ + FLASH_Program_OTPHalfWord(Address, DataAddress); + break; + + case FLASH_TYPEPROGRAM_OTP_WORD: + /* Program a word (32-bit) at a OTP address */ + FLASH_Program_OTPWord(Address, DataAddress); + break; + + default: + status = HAL_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + break; + } + } + + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param = 0U; + uint32_t error; + + /* Save Flash errors */ + error = FLASH->ISR & FLASH_FLAG_ISR_ERRORS; + error |= (FLASH->OPTISR & FLASH_FLAG_OPTISR_ERRORS); + + /* Set parameter of the callback */ + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_SECTORS) + { + param = pFlash.Sector; + } + else if ((pFlash.ProcedureOnGoing & FLASH_CR_PG) != 0U) + { + param = pFlash.Address; + } + else + { + /* Empty statement (to be compliant MISRA 15.7) */ + } + + /* Clear operation bit on the on-going procedure */ + CLEAR_BIT(FLASH->CR, (pFlash.ProcedureOnGoing & ~(FLASH_WORD_SIZE_MASK))); + + /* Check FLASH operation error flags */ + if (error != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + FLASH->ICR = (error & FLASH_FLAG_ISR_ERRORS); + FLASH->OPTICR = (error & FLASH_FLAG_OPTISR_ERRORS); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = 0U; + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* Check FLASH End of Operation flag */ + if ((FLASH->ISR & FLASH_FLAG_EOP) != 0U) + { + /* Clear FLASH End of Operation pending bit */ + FLASH->ICR = FLASH_FLAG_EOP; + + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_SECTORS) + { + /* Nb of sectors to erase can be decreased */ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase */ + if (pFlash.NbSectorsToErase != 0U) + { + /* Increment sector number */ + pFlash.Sector++; + FLASH_SectorErase(pFlash.Sector); + } + else + { + /* No more sectors to Erase */ + pFlash.ProcedureOnGoing = 0U; + param = 0xFFFFFFFFU; + } + } + else + { + /*Clear the procedure ongoing*/ + pFlash.ProcedureOnGoing = 0U; + } + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == 0U) + { + /* Disable End of Operation and Error interrupts */ + CLEAR_BIT(FLASH->IER, (FLASH_IT_EOP | FLASH_IT_WRPERR | FLASH_IT_PGSERR | FLASH_IT_STRBERR | FLASH_IT_INCERR)); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + + /* Check ECC Correction Error */ + if ((FLASH->IER & FLASH_IT_SNECCERR) != 0U) + { + if ((FLASH->ISR & FLASH_FLAG_SNECCERR) != 0U) + { + /* Call User callback */ + HAL_FLASHEx_EccCorrectionCallback(); + + /* Clear ECC correction flag in order to allow new ECC error record */ + FLASH->ICR = FLASH_FLAG_SNECCERR; + } + } + + /* Check ECC Detection Error */ + if ((FLASH->IER & FLASH_IT_DBECCERR) != 0U) + { + if ((FLASH->ISR & FLASH_FLAG_DBECCERR) != 0U) + { + /* Call User callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear ECC detection flag in order to allow new ECC error record */ + FLASH->ICR = FLASH_FLAG_DBECCERR; + } + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sector Erase: Sector which has been erased + * (if 0xFFFFFFFF, it means that all the selected sectors have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sector Erase: Sector number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* verify Flash is unlocked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + /* verify Flash is locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + return HAL_OK; + } + + return HAL_ERROR; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + + /* Verify that the Option Bytes are unlocked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK); + + /* Verify that the Option Bytes are locked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + return HAL_OK; + } + + return HAL_ERROR; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be: + * @arg HAL_FLASH_ERROR_NONE: No error set + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protection error + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming sequence error + * @arg HAL_FLASH_ERROR_STRB: FLASH Strobe error + * @arg HAL_FLASH_ERROR_INC: FLASH Inconsistency error + * @arg HAL_FLASH_ERROR_RDS: FLASH Read security error + * @arg HAL_FLASH_ERROR_SNECC: FLASH ECC single error + * @arg HAL_FLASH_ERROR_DBECC: FLASH ECC double error + * @arg HAL_FLASH_ERROR_CRC: FLASH CRC error + * @arg HAL_FLASH_ERROR_KDR: FLASH Key data register error + * @arg HAL_FLASH_ERROR_OBC: FLASH Options byte change error + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t timeout = HAL_GetTick() + Timeout; + uint32_t error; + + while ((FLASH->SR & FLASH_SR_QW) != 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH operation error flags */ + error = (FLASH->ISR & FLASH_FLAG_ISR_ERRORS); + error |= (FLASH->OPTISR & FLASH_FLAG_OPTISR_ERRORS); + + if (error != 0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + FLASH->ICR = (error & FLASH_FLAG_ISR_ERRORS); + FLASH->OPTICR = (error & FLASH_FLAG_OPTISR_ERRORS); + + return HAL_ERROR; + } + + /* Check FLASH End of Operation flag */ + if ((FLASH->ISR & FLASH_FLAG_EOP) != 0U) + { + /* Clear FLASH End of Operation pending bit */ + FLASH->ICR = FLASH_FLAG_EOP; + } + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @brief Program a byte (8-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_Byte(uint32_t Address, uint32_t DataAddress) +{ + uint8_t *dest_addr = (uint8_t *)Address; + uint8_t *src_addr = (uint8_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the byte */ + *dest_addr = *src_addr; + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint32_t DataAddress) +{ + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the half-word */ + *dest_addr = *src_addr; + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a word (32-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_Word(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 2; + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + index--; + } while (index != 0U); + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a double-word (64-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 4; + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the double-word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + index--; + } while (index != 0U); + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a quad-word (128-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_QuadWord(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 8; + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the quad-word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + index--; + } while (index != 0U); + + __ISB(); + __DSB(); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a half-word (16-bit) at a OTP address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_OTPHalfWord(uint32_t Address, uint32_t DataAddress) +{ + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_OTP_ADDRESS(Address)); + + /* Set PG_OTP bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG_OTP); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the half-word */ + *dest_addr = *src_addr; + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @brief Program a word (32-bit) at a OTP address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address of data to be programmed. + * @retval None + */ +static void FLASH_Program_OTPWord(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 2; + uint16_t *dest_addr = (uint16_t *)Address; + uint16_t *src_addr = (uint16_t *)DataAddress; + uint32_t primask_bit; + + /* Check the parameters */ + assert_param(IS_FLASH_OTP_ADDRESS(Address)); + + /* Set PG_OTP bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG_OTP); + + /* Enter critical section: Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + index--; + } while (index != 0U); + + __ISB(); + __DSB(); + + /* Set FW bit */ + SET_BIT(FLASH->CR, FLASH_CR_FW); + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash_ex.c new file mode 100644 index 000000000..5737414b5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_flash_ex.c @@ -0,0 +1,1306 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32H7RSxx + devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) Watermark-based secure area including PCROP and secure hide areas + (+) Block-based secure pages + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32H7RSxx devices. It includes: + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: page Erase and Bank/Mass Erase + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to: + (++) Configure the write protection for each area + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the watermark security for each area including PCROP and secure hide areas + (++) Configure the boot lock (BOOT_LOCK) + (++) Configure the Boot addresses + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to: + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get the configuration of a watermark security area including PCROP and secure hide areas + (++) Get the boot lock (BOOT_LOCK) configuration + (++) Get the value of a boot address + + (#) Block-based secure / privilege area configuration function: Use HAL_FLASHEx_ConfigBBAttributes() + (++) Bit-field allowing to secure or un-secure each page + (++) Bit-field allowing to privilege or un-privilege each page + + (#) Get the block-based secure / privilege area configuration function: Use HAL_FLASHEx_GetBBSec() + (++) Return the configuration of the block-based security and privilege for all the pages + + (#) Activation of the secure hide area function: Use HAL_FLASHEx_EnableSecHideProtection() + (++) Deny the access to the secure hide area + + (#) Privilege mode configuration function: Use HAL_FLASHEx_ConfigPrivMode() + (++) FLASH register can be protected against non-privilege accesses + + (#) Get the privilege mode configuration function: Use HAL_FLASHEx_GetPrivMode() + (++) Return if the FLASH registers are protected against non-privilege accesses + + (#) Security inversion configuration function: Use HAL_FLASHEx_ConfigSecInversion() + (++) FLASH secure state can be override + + (#) Get the security inversion configuration function: Use HAL_FLASHEx_GetSecInversion() + (++) Return if FLASH secure state is override + + (#) Enable bank low-power mode function: Use HAL_FLASHEx_EnablePowerDown() + (++) Enable low-power mode for Flash Bank 1 and/or Bank 2 + + (#) Enable low-power read mode function: Use HAL_FLASHEx_ConfigLowPowerRead() + (++) Enable low-power read mode for Flash memory + + (#) Get the low-power read mode configuration function: Use HAL_FLASHEx_GetLowPowerRead() + (++) Return if FLASH is in low-power read mode or normal read mode + + (#) Get Flash operation function: Use HAL_FLASHEx_GetOperation() + (++) Return information about the on-going Flash operation. After a + system reset, return information about the interrupted Flash operation, if any. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define SYSTEM_FLASH_SIZE 0x00020000UL /*!< System Flash size : 128 KB */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(void); + +static void FLASH_OB_WRPConfig(uint32_t WRPState, uint32_t WRPSector); +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig1, uint32_t UserConfig2); +static void FLASH_OB_HDPConfig(uint32_t HDPStartPage, uint32_t HDPEndPage); +static void FLASH_OB_NVConfig(uint32_t NVState); + +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector); +static void FLASH_OB_GetUser(uint32_t *UserConfig1, uint32_t *UserConfig2); +static void FLASH_OB_GetHDP(uint32_t *HDPStartPage, uint32_t *HDPEndPage); +static uint32_t FLASH_OB_GetNV(void); +static uint32_t FLASH_OB_GetRoT(void); +static uint32_t FLASH_OB_GetEpoch(void); + +static void FLASH_CRC_AddSector(uint32_t Sector); +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr); +static HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors. + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] SectorError pointer to variable that contains the configuration + * information on faulty sector in case of error (0xFFFFFFFF means that all + * the sectors have been correctly erased). + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(const FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) +{ + HAL_StatusTypeDef status; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of SectorError variable*/ + *SectorError = 0xFFFFFFFFU; + + for (sector_index = pEraseInit->Sector; sector_index < (pEraseInit->Sector + pEraseInit->NbSectors); + sector_index++) + { + FLASH_SectorErase(sector_index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty sector */ + *SectorError = sector_index; + break; + } + } + } + + /* If the erase operation is completed, disable the associated bits */ + CLEAR_BIT(FLASH->CR, (pEraseInit->TypeErase | FLASH_CR_SSN)); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled. + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(const FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = pEraseInit->TypeErase; + + /* Enable End of Operation and Error interrupts */ + SET_BIT(FLASH->IER, (FLASH_IT_EOP | FLASH_IT_WRPERR | FLASH_IT_PGSERR | FLASH_IT_STRBERR | FLASH_IT_INCERR)); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(); + } + else + { + /* Erase by sector to be done */ + pFlash.NbSectorsToErase = pEraseInit->NbSectors; + pFlash.Sector = pEraseInit->Sector; + + /* Erase first sector and wait for IT */ + FLASH_SectorErase(pEraseInit->Sector); + } + } + + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @note To configure any option bytes, the option lock bit OPTLOCK must be + * cleared with the call of HAL_FLASH_OB_Unlock() function. + * @note New option bytes configuration will be taken into account in two cases: + * - after an option bytes launch through the call of HAL_FLASH_OB_Launch() + * - after a power reset (BOR reset or exit from Standby/Shutdown modes) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(const FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if ((status == HAL_OK) && (pOBInit->OptionType != 0U)) + { + /* Set PG_OPT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + + /* Write protection configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0U) + { + /* Configure of Write protection on the selected area */ + FLASH_OB_WRPConfig(pOBInit->WRPState, pOBInit->WRPSector); + } + + /* User Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) + { + /* Configure the user option bytes */ + FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig1, pOBInit->USERConfig2); + } + + /* HDP configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_HDP) != 0U) + { + /* Configure the HDP Protection */ + FLASH_OB_HDPConfig(pOBInit->HDPStartPage, pOBInit->HDPEndPage); + } + + /* Non-volatile state configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_NV) != 0U) + { + /* Configure the non-volatile state */ + FLASH_OB_NVConfig(pOBInit->NVState); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Clear PG_OPT Bit */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that contains the + * configuration information. + * @note The fields pOBInit->WRPArea, pOBInit->WMSecConfig and pOBInit->BootAddrConfig + * should indicate which area/address is requested for the WRP, WM Security or + * Boot Address, else no information will be returned + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(&(pOBInit->WRPState), &(pOBInit->WRPSector)); + + /* Get the user option bytes */ + FLASH_OB_GetUser(&(pOBInit->USERConfig1), &(pOBInit->USERConfig2)); + + /* Get the HDP Protection */ + FLASH_OB_GetHDP(&(pOBInit->HDPStartPage), &(pOBInit->HDPEndPage)); + + /* Get the non-volatile state */ + pOBInit->NVState = FLASH_OB_GetNV(); + + /* Get the Root-Of-Trust configuration */ + pOBInit->ROTConfig = FLASH_OB_GetRoT(); + + /* Get the epoch */ + pOBInit->EPOCH = FLASH_OB_GetEpoch(); +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group2 Extended CRC operation functions + * @brief Extended CRC operation functions + * +@verbatim + =============================================================================== + ##### Extended CRC operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + CRC Operations. + +@endverbatim + * @{ + */ +/** + * @brief Configure the OTP Lock. + * + * @note To configure the OTP Lock options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @param OTPLBlock Specifies the block(s) to be OTP locked (used for OPTIONBYTE_OTPL). + * The value of this parameter depend on device used within the same series + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OTPLockConfig(uint32_t OTPLBlock) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_OTP_BLOCK(OTPLBlock)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set the bit for the OTP programmation */ + SET_BIT(FLASH->CR, FLASH_CR_PG_OTP); + + /* Set PG_OPT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + + /* Configure the write protected area */ + MODIFY_REG(FLASH->OTPLSRP, FLASH_OTPLSRP_OTPL, (OTPLBlock & FLASH_OTPLSRP_OTPL)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Clear PG_OPT Bit */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + + /* Clear the bit for the OTP programmation */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PG_OTP); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Return the FLASH OTP Lock Option Bytes value. + * + * @retval Status of the OTP Lock + */ +uint32_t HAL_FLASHEx_GetOTPLock(void) +{ + return (FLASH->OTPLSR & FLASH_OTPLSR_OTPL); +} + +/** + * @brief Configure the Keys. + * + * @note To configure the Keys options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @param pKeyConfig Key(s) to be configured. + * + * @param pKey Address of the key + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_KeyConfig(const FLASH_KeyConfigTypeDef *pKeyConfig, const uint32_t *pKey) +{ + uint32_t index; + uint32_t index_max; + const uint32_t *pdata; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_KEY_INDEX(pKeyConfig->Index)); + assert_param(IS_KEY_SIZE(pKeyConfig->Size)); + assert_param(IS_KEY_HDPL_LEVEL(pKeyConfig->HDPLLevel)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set PG_OPT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + + switch (pKeyConfig->Size) + { + case FLASH_KEY_32_BITS : + index_max = 1U; + break; + + case FLASH_KEY_64_BITS : + index_max = 2U; + break; + + case FLASH_KEY_128_BITS : + index_max = 4U; + break; + + case FLASH_KEY_256_BITS : + index_max = 8U; + break; + + default: + /* This case should not occur */ + index_max = 0U; + break; + } + + pdata = pKey; + for (index = 0U; index < index_max; index++) + { + FLASH->OBKDR[index] = pdata[index]; + } + + MODIFY_REG(FLASH->OBKCR, (FLASH_OBKCR_OBKINDEX | FLASH_OBKCR_NEXTKL | FLASH_OBKCR_OBKSIZE), + (pKeyConfig->Index | pKeyConfig->HDPLLevel | pKeyConfig->Size)); + + SET_BIT(FLASH->OBKCR, (FLASH_OBKCR_KEYSTART | FLASH_OBKCR_KEYPROG)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + CLEAR_BIT(FLASH->OBKCR, FLASH_OBKCR_KEYPROG); + + /* Clear PG_OPT Bit */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Load and optionally return the FLASH Option Bytes Key value. + * + * @param pKeyConfig Configuration of the key to be loaded and optionally returned + * + * @param pKey Address to return the FLASH Option Bytes Key value if not NULL. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_GetKey(const FLASH_KeyConfigTypeDef *pKeyConfig, uint32_t *pKey) +{ + uint32_t index; + uint32_t *pdata; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_KEY_INDEX(pKeyConfig->Index)); + assert_param(IS_KEY_HDPL_LEVEL(pKeyConfig->HDPLLevel)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set PG_OPT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + + /* Configure index and HDPL level */ + MODIFY_REG(FLASH->OBKCR, (FLASH_OBKCR_OBKINDEX | FLASH_OBKCR_NEXTKL | FLASH_OBKCR_OBKSIZE | FLASH_OBKCR_KEYPROG), + (pKeyConfig->Index | pKeyConfig->HDPLLevel)); + + /* Set the start bit to get the key value */ + SET_BIT(FLASH->OBKCR, FLASH_OBKCR_KEYSTART); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if ((status == HAL_OK) && (pKey != NULL)) + { + pdata = pKey; + for (index = 0U; index < 8U; index++) + { + *pdata = FLASH->OBKDR[index]; + pdata++; + } + } + + /* Clear PG_OPT Bit */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a CRC computation on the specified FLASH memory area + * @param pCRCInit pointer to an FLASH_CRCInitTypeDef structure that + * contains the configuration information for the CRC computation. + * @param CRC_Result pointer to CRC result + * @note CRC computation uses CRC-32 (Ethernet) polynomial 0x4C11DB7 + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(const FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result) +{ + HAL_StatusTypeDef status; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPE_CRC(pCRCInit->TypeCRC)); + assert_param(IS_FLASH_BURST_SIZE_CRC(pCRCInit->BurstSize)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Enable CRC feature */ + SET_BIT(FLASH->CR, FLASH_CR_CRC_EN); + + /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */ + FLASH->ICR = (FLASH_ICR_CRCRDERRF | FLASH_ICR_CRCENDF); + + /* Clear current CRC result and program burst size */ + MODIFY_REG(FLASH->CRCCR, (FLASH_CRCCR_CLEAN_CRC | FLASH_CRCCR_CRC_BURST), + (FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize)); + + if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS) + { + /* Select CRC by sector and clear sectors list */ + SET_BIT(FLASH->CRCCR, (FLASH_CRCCR_CRC_BY_SECT | FLASH_CRCCR_CLEAN_SECT)); + + /* Select CRC sectors */ + for (sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++) + { + FLASH_CRC_AddSector(sector_index); + } + } + else if (pCRCInit->TypeCRC == FLASH_CRC_BANK) + { + /* Select CRC by sector and all sectors */ + SET_BIT(FLASH->CRCCR, (FLASH_CRCCR_CRC_BY_SECT | FLASH_CRCCR_ALL_SECT)); + } + else + { + /* Select CRC by address */ + CLEAR_BIT(FLASH->CRCCR, FLASH_CRCCR_CRC_BY_SECT); + + /* Select CRC start and end addresses */ + FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr); + } + + /* Start the CRC calculation */ + SET_BIT(FLASH->CRCCR, FLASH_CRCCR_START_CRC); + + /* Wait on CRC busy flag */ + status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* Return CRC result */ + (*CRC_Result) = FLASH->CRCDATAR; + + /* Disable CRC feature */ + CLEAR_BIT(FLASH->CR, FLASH_CR_CRC_EN); + + /* Clear CRC flags */ + FLASH->ICR = (FLASH_ICR_CRCRDERRF | FLASH_ICR_CRCENDF); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASHEx_Exported_Functions_Group3 Extended ECC operation functions + * @brief Extended ECC operation functions + * +@verbatim + =============================================================================== + ##### Extended ECC operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + ECC Operations. + +@endverbatim + * @{ + */ +/** + * @brief Enable ECC correction interrupt + * @retval None + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR); +} + +/** + * @brief Disable ECC correction interrupt + * @retval None + */ +void HAL_FLASHEx_DisableEccCorrectionInterrupt(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR); +} + +/** + * @brief Enable ECC detection interrupt + * @retval None + */ +void HAL_FLASHEx_EnableEccDetectionInterrupt(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR); +} + +/** + * @brief Disable ECC detection interrupt + * @retval None + */ +void HAL_FLASHEx_DisableEccDetectionInterrupt(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR); +} + +/** + * @brief Get the ECC error information. + * @param pData Pointer to an FLASH_EccInfoTypeDef structure that contains the + * ECC error information. + * @note This function should be called before ECC bit is cleared + * (in callback function) + * @retval None + */ +void HAL_FLASHEx_GetEccInfo(FLASH_EccInfoTypeDef *pData) +{ + /* Check Null pointer */ + assert_param(pData != NULL); + + /* Set address which generate ECC error */ + if ((FLASH->ISR & FLASH_FLAG_SNECCERR) != 0U) + { + pData->Address = FLASH->ECCSFADDR; + } + else + { + pData->Address = FLASH->ECCDFADDR; + } + + /* Set area according address */ + if (IS_FLASH_MAIN_MEM_ADDRESS(pData->Address)) + { + pData->Area = FLASH_ECC_AREA_USER_BANK1; + } + else if (IS_FLASH_OTP_ADDRESS(pData->Address)) + { + pData->Area = FLASH_ECC_AREA_OTP; + } + else if ((pData->Address >= SYSTEM_FLASH_BASE) && + (pData->Address < (SYSTEM_FLASH_BASE + SYSTEM_FLASH_SIZE))) + { + pData->Area = FLASH_ECC_AREA_SYSTEM; + } + else + { + pData->Area = FLASH_ECC_AREA_READ_ONLY; + } + + /* Set Master which initiates transaction. On H7RS, it's necessary CPU1 */ + pData->MasterID = FLASH_ECC_MASTER_CPU1; +} + +/** + * @brief Handle Flash ECC Detection interrupt request. + * @note On STM32H7RS, this Irq Handler should be called in Bus Fault + * interrupt subroutine. + * @retval None + */ +void HAL_FLASHEx_ECCD_IRQHandler(void) +{ + /* Check ECC Detection Error */ + if ((FLASH->ISR & FLASH_FLAG_DBECCERR) != 0U) + { + /* Call User callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear ECC detection flag in order to allow new ECC error record */ + FLASH->ICR = FLASH_FLAG_DBECCERR; + } +} + +/** + * @brief FLASH ECC Correction interrupt callback. + * @retval None + */ +__weak void HAL_FLASHEx_EccCorrectionCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASHEx_EccCorrectionCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH ECC Detection interrupt callback. + * @retval None + */ +__weak void HAL_FLASHEx_EccDetectionCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASHEx_EccDetectionCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ +/** + * @brief Mass erase of FLASH memory. + * @retval None + */ +static void FLASH_MassErase(void) +{ + /* Set the Mass Erase Bit and proceed to erase */ + SET_BIT(FLASH->CR, (FLASH_CR_BER | FLASH_CR_START)); +} + +/** + * @brief Erase the specified FLASH memory sector. + * @param Sector FLASH sector to erase + * This parameter must be a value between 0 and (max number of sectors in the bank - 1) + * @retval None + */ +void FLASH_SectorErase(uint32_t Sector) +{ + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + + /* Proceed to erase the page */ + MODIFY_REG(FLASH->CR, (FLASH_CR_SSN | FLASH_CR_SER | FLASH_CR_START), \ + ((Sector << FLASH_CR_SSN_Pos) | FLASH_CR_SER | FLASH_CR_START)); +} + +/** + * @brief Configure the write protection of the desired sectors. + * + * @note To configure the WRP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @param WRPState + * + * @param WRPSector + * + * @retval None + */ +static void FLASH_OB_WRPConfig(uint32_t WRPState, uint32_t WRPSector) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPSTATE(WRPState)); + + /* Configure the write protected area */ + if (WRPState == OB_WRPSTATE_DISABLE) + { + FLASH->WRPSRP |= (WRPSector & FLASH_WRPSRP_WRPS); + } + else if (WRPState == OB_WRPSTATE_ENABLE) + { + FLASH->WRPSRP &= (~(WRPSector & FLASH_WRPSRP_WRPS)); + } + else + { + /* Empty statement (to be compliant MISRA 15.7) */ + } +} + +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @param UserType: The FLASH User Option Bytes to be modified. + * This parameter can be a combination of @ref FLASH_OB_USER_TYPE + * @param UserConfig1 The selected User Option Bytes values + * @param UserConfig2 The selected User Option Bytes values + * @retval None + */ +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig1, uint32_t UserConfig2) +{ + uint32_t optr_reg_val = 0; + uint32_t optr_reg_mask = 0; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + + if ((UserType & OB_USER_BOR_LEV) != 0U) + { + /* BOR level option byte should be modified */ + assert_param(IS_OB_USER_BOR_LEVEL(UserConfig1 & FLASH_OBW1SR_BOR_LEVEL)); + + /* Set value and mask for BOR level option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_BOR_LEVEL); + optr_reg_mask |= FLASH_OBW1SR_BOR_LEVEL; + } + + if ((UserType & OB_USER_IWDG_SW) != 0U) + { + /* IWDG1_HW option byte should be modified */ + assert_param(IS_OB_USER_IWDG(UserConfig1 & FLASH_OBW1SR_IWDG_HW)); + + /* Set value and mask for IWDG1_HW option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_HW); + optr_reg_mask |= FLASH_OBW1SR_IWDG_HW; + } + + if ((UserType & OB_USER_NRST_STOP) != 0U) + { + /* NRST_STOP_D1 option byte should be modified */ + assert_param(IS_OB_USER_STOP(UserConfig1 & FLASH_OBW1SR_NRST_STOP)); + + /* Set value and mask for NRST_STOP_D1 option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_NRST_STOP); + optr_reg_mask |= FLASH_OBW1SR_NRST_STOP; + } + + if ((UserType & OB_USER_NRST_STDBY) != 0U) + { + /* NRST_STBY_D1 option byte should be modified */ + assert_param(IS_OB_USER_STANDBY(UserConfig1 & FLASH_OBW1SR_NRST_STBY)); + + /* Set value and mask for NRST_STBY_D1 option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_NRST_STBY); + optr_reg_mask |= FLASH_OBW1SR_NRST_STBY; + } + + if ((UserType & OB_USER_XSPI1_HSLV) != 0U) + { + /* XSPI1_HSLV option byte should be modified */ + assert_param(IS_OB_USER_XSPI1_HSLV(UserConfig1 & FLASH_OBW1SR_XSPI1_HSLV)); + + /* Set value and mask for XSPI1_HSLV option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_XSPI1_HSLV); + optr_reg_mask |= FLASH_OBW1SR_XSPI1_HSLV; + } + + if ((UserType & OB_USER_XSPI2_HSLV) != 0U) + { + /* XSPI2_HSLV option byte should be modified */ + assert_param(IS_OB_USER_XSPI2_HSLV(UserConfig1 & FLASH_OBW1SR_XSPI2_HSLV)); + + /* Set value and mask for XSPI2_HSLV option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_XSPI2_HSLV); + optr_reg_mask |= FLASH_OBW1SR_XSPI2_HSLV; + } + + if ((UserType & OB_USER_IWDG_STOP) != 0U) + { + /* IWDG_FZ_STOP option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STOP(UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STOP)); + + /* Set value and mask for IWDG_FZ_STOP option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STOP); + optr_reg_mask |= FLASH_OBW1SR_IWDG_FZ_STOP; + } + + if ((UserType & OB_USER_IWDG_STDBY) != 0U) + { + /* IWDG_FZ_SDBY option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STDBY(UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STBY)); + + /* Set value and mask for IWDG_FZ_SDBY option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STBY); + optr_reg_mask |= FLASH_OBW1SR_IWDG_FZ_STBY; + } + + if ((UserType & OB_USER_VDDIO_HSLV) != 0U) + { + /* VDDIO_HSLV option byte should be modified */ + assert_param(IS_OB_USER_VDDIO_HSLV(UserConfig1 & FLASH_OBW1SR_VDDIO_HSLV)); + + /* Set value and mask for VDDIO_HSLV option byte */ + optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_VDDIO_HSLV); + optr_reg_mask |= FLASH_OBW1SR_VDDIO_HSLV; + } + + /* Configure the option bytes register 1 if necessary */ + if (optr_reg_mask != 0U) + { + MODIFY_REG(FLASH->OBW1SRP, optr_reg_mask, optr_reg_val); + } + + optr_reg_val = 0; + optr_reg_mask = 0; + + if ((UserType & OB_USER_ITCM_AXI_SHARE) != 0U) + { + /* ITCM_AXI_SHARE option byte should be modified */ + assert_param(IS_OB_USER_ITCM_AXI_SHARE(UserConfig2 & FLASH_OBW2SR_ITCM_AXI_SHARE)); + + /* Set value and mask for ITCM_AXI_SHARE option byte */ + optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_ITCM_AXI_SHARE); + optr_reg_mask |= FLASH_OBW2SR_ITCM_AXI_SHARE; + } + + if ((UserType & OB_USER_DTCM_AXI_SHARE) != 0U) + { + /* DTCM_AXI_SHARE option byte should be modified */ + assert_param(IS_OB_USER_DTCM_AXI_SHARE(UserConfig2 & FLASH_OBW2SR_DTCM_AXI_SHARE)); + + /* Set value and mask for DTCM_AXI_SHARE option byte */ + optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_DTCM_AXI_SHARE); + optr_reg_mask |= FLASH_OBW2SR_DTCM_AXI_SHARE; + } + + if ((UserType & OB_USER_SRAM_ECC) != 0U) + { + /* SRAM_ECC option byte should be modified */ + assert_param(IS_OB_USER_AXISRAM_ECC(UserConfig2 & FLASH_OBW2SR_ECC_ON_SRAM)); + + /* Set value and mask for SRAM_ECC option byte */ + optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_ECC_ON_SRAM); + optr_reg_mask |= FLASH_OBW2SR_ECC_ON_SRAM; + } + + if ((UserType & OB_USER_I2C_NI3C) != 0U) + { + /* I2C_NI3C option byte should be modified */ + assert_param(IS_OB_USER_I2C_NI3C(UserConfig2 & FLASH_OBW2SR_I2C_NI3C)); + + /* Set value and mask for I2C_NI3C option byte */ + optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_I2C_NI3C); + optr_reg_mask |= FLASH_OBW2SR_I2C_NI3C; + } + + /* Configure the option bytes register 2 if necessary */ + if (optr_reg_mask != 0U) + { + MODIFY_REG(FLASH->OBW2SRP, optr_reg_mask, optr_reg_val); + } +} + +/** + * @brief Configure the Hide Protection. + * + * @note To configure the HDP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @param HDPStartPage + * + * @param HDPEndPage + * + * @retval None + */ +static void FLASH_OB_HDPConfig(uint32_t HDPStartPage, uint32_t HDPEndPage) +{ + /* Check the parameters */ + assert_param(IS_OB_HDP_PAGE(HDPStartPage)); + assert_param(IS_OB_HDP_PAGE(HDPEndPage)); + + MODIFY_REG(FLASH->HDPSRP, (FLASH_HDPSRP_HDP_AREA_START | FLASH_HDPSRP_HDP_AREA_END), \ + (HDPStartPage | (HDPEndPage << FLASH_HDPSRP_HDP_AREA_END_Pos))); +} + +/** + * @brief Configure the Non-Volatile state. + * + * @note To configure the Non-volatile options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @param NVState + * + * @retval None + */ +static void FLASH_OB_NVConfig(uint32_t NVState) +{ + /* Check the parameter */ + assert_param(IS_OB_NVSTATE(NVState)); + + MODIFY_REG(FLASH->NVSRP, FLASH_NVSRP_NVSTATE, NVState); +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * + * @param WRPState + * + * @param WRPSector + * + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector) +{ + if ((FLASH->WRPSR & FLASH_WRPSR_WRPS) == FLASH_WRPSR_WRPS) + { + /* All sectors aren't write protected */ + *WRPState = OB_WRPSTATE_DISABLE; + } + else + { + /* Some sectors are write protected */ + *WRPState = OB_WRPSTATE_ENABLE; + *WRPSector = ((~(FLASH->WRPSR)) & FLASH_WRPSR_WRPS); + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * + * @param UserConfig1 Address to return the FLASH User Option Bytes values configuration 1. + * The return value can be a combination of + * @param UserConfig2 Address to return the FLASH User Option Bytes values configuration 2. + * The return value can be a combination of + * + * @retval None + */ +static void FLASH_OB_GetUser(uint32_t *UserConfig1, uint32_t *UserConfig2) +{ + *UserConfig1 = FLASH->OBW1SR; + *UserConfig2 = FLASH->OBW2SR; +} + +/** + * @brief Return the FLASH Hide Protection Option Bytes value. + * + * @param HDPStartPage Address to return the FLASH HDP Option Bytes Start Sector. + * The return value can be a combination of + * @param HDPEndPage Address to return the FLASH HDP Option Bytes End Sector. + * The return value can be a combination of + * + * @retval None + */ +static void FLASH_OB_GetHDP(uint32_t *HDPStartPage, uint32_t *HDPEndPage) +{ + *HDPStartPage = (FLASH->HDPSR & FLASH_HDPSR_HDP_AREA_START); + *HDPEndPage = ((FLASH->HDPSR & FLASH_HDPSR_HDP_AREA_END) >> FLASH_HDPSR_HDP_AREA_END_Pos); +} + +/** + * @brief Return the FLASH Non-volatile state Option Bytes value. + * + * @retval Value of Non-volatile state + */ +static uint32_t FLASH_OB_GetNV(void) +{ + return (FLASH->NVSR & FLASH_NVSR_NVSTATE); +} + +/** + * @brief Return the FLASH RoT Option Bytes value. + * + * @retval Value of the RoT + */ +static uint32_t FLASH_OB_GetRoT(void) +{ + return (FLASH->ROTSR & (FLASH_ROTSR_OEM_PROVD | FLASH_ROTSR_DBG_AUTH | FLASH_ROTSR_IROT_SELECT)); +} + +/** + * @brief Return the FLASH Epoch Option Bytes value. + * + * @retval Value of the Epoch + */ +static uint32_t FLASH_OB_GetEpoch(void) +{ + return (FLASH->EPOCHSR & FLASH_EPOCHSR_EPOCH); +} + +/** + * @brief Add a CRC sector to the list of sectors on which the CRC will be calculated + * @param Sector Specifies the CRC sector number + * @retval None + */ +static void FLASH_CRC_AddSector(uint32_t Sector) +{ + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + + /* Clear CRC sector */ + MODIFY_REG(FLASH->CRCCR, FLASH_CRCCR_CRC_SECT, Sector); + + /* Activate ADD_SECT bit */ + SET_BIT(FLASH->CRCCR, FLASH_CRCCR_ADD_SECT); +} + +/** + * @brief Select CRC start and end memory addresses on which the CRC will be calculated + * @param CRCStartAddr Specifies the CRC start address + * @param CRCEndAddr Specifies the CRC end address + * @retval None + */ +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr) +{ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(CRCStartAddr)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(CRCEndAddr)); + + /* Write CRC Start and End addresses */ + FLASH->CRCSADDR = (CRCStartAddr - FLASH_BASE); + FLASH->CRCEADDR = (CRCEndAddr - FLASH_BASE); +} + +/** + * @brief Wait for a FLASH CRC computation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +static HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t timeout = HAL_GetTick() + Timeout; + + /* Wait for the FLASH CRC computation to complete by polling on CRC_BUSY flag to be reset */ + while ((FLASH->SR & FLASH_SR_CRC_BUSY) != 0U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + /* Check FLASH CRC calculation error flag */ + if ((FLASH->ISR & FLASH_FLAG_CRCERR) != 0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= HAL_FLASH_ERROR_CRC; + + /* Clear CRC error flag */ + FLASH->ICR = FLASH_FLAG_CRCERR; + + return HAL_ERROR; + } + + /* Check FLASH CRC End of Calculation flag */ + if ((FLASH->ISR & FLASH_FLAG_CRCEND) != 0U) + { + /* Clear FLASH End of Calculation pending bit */ + FLASH->ICR = FLASH_FLAG_CRCEND; + } + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxmmu.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxmmu.c new file mode 100644 index 000000000..2b38a2b88 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxmmu.c @@ -0,0 +1,872 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gfxmmu.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Graphic MMU (GFXMMU) peripheral: + * + Initialization and De-initialization. + * + LUT configuration. + * + Modify physical buffer addresses. + * + Packing configuration. + * + Error management. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Initialization *** + ====================== + [..] + (#) As prerequisite, fill in the HAL_GFXMMU_MspInit() : + (++) Enable GFXMMU clock interface with __HAL_RCC_GFXMMU_CLK_ENABLE(). + (++) If interrupts are used, enable and configure GFXMMU global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (#) Configure the number of blocks per line, default value, physical + buffer addresses and interrupts using the HAL_GFXMMU_Init() function. + + *** LUT configuration *** + ========================= + [..] + (#) Use HAL_GFXMMU_DisableLutLines() to deactivate all LUT lines (or a + range of lines). + (#) Use HAL_GFXMMU_ConfigLut() to copy LUT from flash to look up RAM. + (#) Use HAL_GFXMMU_ConfigLutLine() to configure one line of LUT. + + *** Modify physical buffer addresses *** + ======================================== + [..] + (#) Use HAL_GFXMMU_ModifyBuffers() to modify physical buffer addresses. + + *** Packing configuration *** + ============================= + [..] + (#) Use HAL_GFXMMU_ConfigPacking() to configure packing. + + *** Error management *** + ======================== + [..] + (#) If interrupts are used, HAL_GFXMMU_IRQHandler() will be called when + an error occurs. This function will call HAL_GFXMMU_ErrorCallback(). + Use HAL_GFXMMU_GetError() to get the error code. + + *** De-initialization *** + ========================= + [..] + (#) As prerequisite, fill in the HAL_GFXMMU_MspDeInit() : + (++) Disable GFXMMU clock interface with __HAL_RCC_GFXMMU_CLK_ENABLE(). + (++) If interrupts has been used, disable GFXMMU global interrupt with + HAL_NVIC_DisableIRQ(). + (#) De-initialize GFXMMU using the HAL_GFXMMU_DeInit() function. + + *** Callback registration *** + ============================= + [..] + The compilation define USE_HAL_GFXMMU_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use functions HAL_GFXMMU_RegisterCallback() to register a user callback. + + [..] + Function HAL_GFXMMU_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : GFXMMU error. + (+) MspInitCallback : GFXMMU MspInit. + (+) MspDeInitCallback : GFXMMU MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_GFXMMU_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. + HAL_GFXMMU_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) ErrorCallback : GFXMMU error. + (+) MspInitCallback : GFXMMU MspInit. + (+) MspDeInitCallback : GFXMMU MspDeInit. + + [..] + By default, after the HAL_GFXMMU_Init and if the state is HAL_GFXMMU_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions: + examples HAL_GFXMMU_ErrorCallback(). + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_GFXMMU_Init + and HAL_GFXMMU_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_GFXMMU_Init and HAL_GFXMMU_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_GFXMMU_RegisterCallback before calling HAL_GFXMMU_DeInit + or HAL_GFXMMU_Init function. + + [..] + When the compilation define USE_HAL_GFXMMU_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#ifdef HAL_GFXMMU_MODULE_ENABLED +#if defined(GFXMMU) +/** @defgroup GFXMMU GFXMMU + * @brief GFXMMU HAL driver module + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup GFXMMU_Private_Constants GFXMMU Private Constants + * @{ + */ +#define GFXMMU_LUTXL_FVB_OFFSET 8U +#define GFXMMU_LUTXL_LVB_OFFSET 16U +#define GFXMMU_CR_ITS_MASK 0x1FU +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GFXMMU_Exported_Functions GFXMMU Exported Functions + * @{ + */ + +/** @defgroup GFXMMU_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the GFXMMU. + (+) De-initialize the GFXMMU. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GFXMMU according to the specified parameters in the + * GFXMMU_InitTypeDef structure and initialize the associated handle. + * @param hgfxmmu GFXMMU handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_Init(GFXMMU_HandleTypeDef *hgfxmmu) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check GFXMMU handle */ + if (hgfxmmu == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_GFXMMU_BLOCK_SIZE(hgfxmmu->Init.BlockSize)); + assert_param(IS_FUNCTIONAL_STATE(hgfxmmu->Init.AddressTranslation)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(hgfxmmu->Init.Buffers.Buf0Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(hgfxmmu->Init.Buffers.Buf1Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(hgfxmmu->Init.Buffers.Buf2Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(hgfxmmu->Init.Buffers.Buf3Address)); + assert_param(IS_FUNCTIONAL_STATE(hgfxmmu->Init.Interrupts.Activation)); + +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hgfxmmu->ErrorCallback = HAL_GFXMMU_ErrorCallback; + + /* Call GFXMMU MSP init function */ + if (hgfxmmu->MspInitCallback == NULL) + { + hgfxmmu->MspInitCallback = HAL_GFXMMU_MspInit; + } + hgfxmmu->MspInitCallback(hgfxmmu); +#else + /* Call GFXMMU MSP init function */ + HAL_GFXMMU_MspInit(hgfxmmu); +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1 */ + + /* Configure GFXMMU_CR register */ + hgfxmmu->Instance->CR = 0U; + hgfxmmu->Instance->CR |= (hgfxmmu->Init.BlockSize); + if (hgfxmmu->Init.AddressTranslation == ENABLE) + { + hgfxmmu->Instance->CR |= GFXMMU_CR_ATE; + } + if (hgfxmmu->Init.Interrupts.Activation == ENABLE) + { + assert_param(IS_GFXMMU_INTERRUPTS(hgfxmmu->Init.Interrupts.UsedInterrupts)); + hgfxmmu->Instance->CR |= hgfxmmu->Init.Interrupts.UsedInterrupts; + } + + /* Configure default value on GFXMMU_DVR register */ + hgfxmmu->Instance->DVR = hgfxmmu->Init.DefaultValue; + + /* Configure physical buffer addresses on GFXMMU_BxCR registers */ + hgfxmmu->Instance->B0CR = hgfxmmu->Init.Buffers.Buf0Address; + hgfxmmu->Instance->B1CR = hgfxmmu->Init.Buffers.Buf1Address; + hgfxmmu->Instance->B2CR = hgfxmmu->Init.Buffers.Buf2Address; + hgfxmmu->Instance->B3CR = hgfxmmu->Init.Buffers.Buf3Address; + + /* Reset GFXMMU error code */ + hgfxmmu->ErrorCode = GFXMMU_ERROR_NONE; + + /* Set GFXMMU to ready state */ + hgfxmmu->State = HAL_GFXMMU_STATE_READY; + } + /* Return function status */ + return status; +} + +/** + * @brief De-initialize the GFXMMU. + * @param hgfxmmu GFXMMU handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_DeInit(GFXMMU_HandleTypeDef *hgfxmmu) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check GFXMMU handle */ + if (hgfxmmu == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + + /* Disable all interrupts on GFXMMU_CR register */ + hgfxmmu->Instance->CR &= ~(GFXMMU_CR_B0OIE | GFXMMU_CR_B1OIE | GFXMMU_CR_B2OIE | GFXMMU_CR_B3OIE | + GFXMMU_CR_AMEIE); + + /* Call GFXMMU MSP de-init function */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) + if (hgfxmmu->MspDeInitCallback == NULL) + { + hgfxmmu->MspDeInitCallback = HAL_GFXMMU_MspDeInit; + } + hgfxmmu->MspDeInitCallback(hgfxmmu); +#else + HAL_GFXMMU_MspDeInit(hgfxmmu); +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1 */ + + /* Set GFXMMU to reset state */ + hgfxmmu->State = HAL_GFXMMU_STATE_RESET; + } + /* Return function status */ + return status; +} + +/** + * @brief Initialize the GFXMMU MSP. + * @param hgfxmmu GFXMMU handle. + * @retval None. + */ +__weak void HAL_GFXMMU_MspInit(GFXMMU_HandleTypeDef *hgfxmmu) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxmmu); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXMMU_MspInit could be implemented in the user file. + */ +} + +/** + * @brief De-initialize the GFXMMU MSP. + * @param hgfxmmu GFXMMU handle. + * @retval None. + */ +__weak void HAL_GFXMMU_MspDeInit(GFXMMU_HandleTypeDef *hgfxmmu) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxmmu); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXMMU_MspDeInit could be implemented in the user file. + */ +} + +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user GFXMMU callback + * to be used instead of the weak predefined callback. + * @param hgfxmmu GFXMMU handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_GFXMMU_ERROR_CB_ID error callback ID. + * @arg @ref HAL_GFXMMU_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_GFXMMU_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_RegisterCallback(GFXMMU_HandleTypeDef *hgfxmmu, + HAL_GFXMMU_CallbackIDTypeDef CallbackID, + pGFXMMU_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + else + { + if (HAL_GFXMMU_STATE_READY == hgfxmmu->State) + { + switch (CallbackID) + { + case HAL_GFXMMU_ERROR_CB_ID : + hgfxmmu->ErrorCallback = pCallback; + break; + case HAL_GFXMMU_MSPINIT_CB_ID : + hgfxmmu->MspInitCallback = pCallback; + break; + case HAL_GFXMMU_MSPDEINIT_CB_ID : + hgfxmmu->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_GFXMMU_STATE_RESET == hgfxmmu->State) + { + switch (CallbackID) + { + case HAL_GFXMMU_MSPINIT_CB_ID : + hgfxmmu->MspInitCallback = pCallback; + break; + case HAL_GFXMMU_MSPDEINIT_CB_ID : + hgfxmmu->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user GFXMMU callback. + * GFXMMU callback is redirected to the weak predefined callback. + * @param hgfxmmu GFXMMU handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_GFXMMU_ERROR_CB_ID error callback ID. + * @arg @ref HAL_GFXMMU_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_GFXMMU_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_UnRegisterCallback(GFXMMU_HandleTypeDef *hgfxmmu, + HAL_GFXMMU_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_GFXMMU_STATE_READY == hgfxmmu->State) + { + switch (CallbackID) + { + case HAL_GFXMMU_ERROR_CB_ID : + hgfxmmu->ErrorCallback = HAL_GFXMMU_ErrorCallback; + break; + case HAL_GFXMMU_MSPINIT_CB_ID : + hgfxmmu->MspInitCallback = HAL_GFXMMU_MspInit; + break; + case HAL_GFXMMU_MSPDEINIT_CB_ID : + hgfxmmu->MspDeInitCallback = HAL_GFXMMU_MspDeInit; + break; + default : + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_GFXMMU_STATE_RESET == hgfxmmu->State) + { + switch (CallbackID) + { + case HAL_GFXMMU_MSPINIT_CB_ID : + hgfxmmu->MspInitCallback = HAL_GFXMMU_MspInit; + break; + case HAL_GFXMMU_MSPDEINIT_CB_ID : + hgfxmmu->MspDeInitCallback = HAL_GFXMMU_MspDeInit; + break; + default : + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hgfxmmu->ErrorCode |= GFXMMU_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + return status; +} +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup GFXMMU_Exported_Functions_Group2 Operations functions + * @brief GFXMMU operation functions + * +@verbatim + ============================================================================== + ##### Operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure LUT. + (+) Modify physical buffer addresses. + (+) Configure packing. + (+) Manage error. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to copy LUT from flash to look up RAM. + * @param hgfxmmu GFXMMU handle. + * @param FirstLine First line enabled on LUT. + * This parameter must be a number between Min_Data = 0 and Max_Data = 1023. + * @param LinesNumber Number of lines enabled on LUT. + * This parameter must be a number between Min_Data = 1 and Max_Data = 1024. + * @param Address Start address of LUT in flash. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_ConfigLut(const GFXMMU_HandleTypeDef *hgfxmmu, + uint32_t FirstLine, + uint32_t LinesNumber, + uint32_t Address) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_GFXMMU_LUT_LINE(FirstLine)); + assert_param(IS_GFXMMU_LUT_LINES_NUMBER(LinesNumber)); + + /* Check GFXMMU state and coherent parameters */ + if ((hgfxmmu->State != HAL_GFXMMU_STATE_READY) || ((FirstLine + LinesNumber) > 1024U)) + { + status = HAL_ERROR; + } + /* Check address translation status */ + else if ((hgfxmmu->Instance->CR & GFXMMU_CR_ATE) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t current_address; + uint32_t current_line; + uint32_t lutxl_address; + uint32_t lutxh_address; + + /* Initialize local variables */ + current_address = Address; + current_line = 0U; + lutxl_address = (uint32_t) &(hgfxmmu->Instance->LUT[2U * FirstLine]); + lutxh_address = (uint32_t) &(hgfxmmu->Instance->LUT[(2U * FirstLine) + 1U]); + + /* Copy LUT from flash to look up RAM */ + while (current_line < LinesNumber) + { + *((uint32_t *)lutxl_address) = *((uint32_t *)current_address); + current_address += 4U; + *((uint32_t *)lutxh_address) = *((uint32_t *)current_address); + current_address += 4U; + lutxl_address += 8U; + lutxh_address += 8U; + current_line++; + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to disable a range of LUT lines. + * @param hgfxmmu GFXMMU handle. + * @param FirstLine First line to disable on LUT. + * This parameter must be a number between Min_Data = 0 and Max_Data = 1023. + * @param LinesNumber Number of lines to disable on LUT. + * This parameter must be a number between Min_Data = 1 and Max_Data = 1024. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_DisableLutLines(const GFXMMU_HandleTypeDef *hgfxmmu, + uint32_t FirstLine, + uint32_t LinesNumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_GFXMMU_LUT_LINE(FirstLine)); + assert_param(IS_GFXMMU_LUT_LINES_NUMBER(LinesNumber)); + + /* Check GFXMMU state and coherent parameters */ + if ((hgfxmmu->State != HAL_GFXMMU_STATE_READY) || ((FirstLine + LinesNumber) > 1024U)) + { + status = HAL_ERROR; + } + /* Check address translation status */ + else if ((hgfxmmu->Instance->CR & GFXMMU_CR_ATE) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t current_line; + uint32_t lutxl_address; + uint32_t lutxh_address; + + /* Initialize local variables */ + current_line = 0U; + lutxl_address = (uint32_t) &(hgfxmmu->Instance->LUT[2U * FirstLine]); + lutxh_address = (uint32_t) &(hgfxmmu->Instance->LUT[(2U * FirstLine) + 1U]); + + /* Disable LUT lines */ + while (current_line < LinesNumber) + { + *((uint32_t *)lutxl_address) = 0U; + *((uint32_t *)lutxh_address) = 0U; + lutxl_address += 8U; + lutxh_address += 8U; + current_line++; + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to configure one line of LUT. + * @param hgfxmmu GFXMMU handle. + * @param lutLine LUT line parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_ConfigLutLine(const GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_LutLineTypeDef *lutLine) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_GFXMMU_LUT_LINE(lutLine->LineNumber)); + assert_param(IS_GFXMMU_LUT_LINE_STATUS(lutLine->LineStatus)); + assert_param(IS_GFXMMU_LUT_BLOCK(lutLine->FirstVisibleBlock)); + assert_param(IS_GFXMMU_LUT_BLOCK(lutLine->LastVisibleBlock)); + assert_param(IS_GFXMMU_LUT_LINE_OFFSET(lutLine->LineOffset)); + + /* Check GFXMMU state */ + if (hgfxmmu->State != HAL_GFXMMU_STATE_READY) + { + status = HAL_ERROR; + } + /* Check address translation status */ + else if ((hgfxmmu->Instance->CR & GFXMMU_CR_ATE) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t lutxl_address; + uint32_t lutxh_address; + + /* Initialize local variables */ + lutxl_address = (uint32_t) &(hgfxmmu->Instance->LUT[2U * lutLine->LineNumber]); + lutxh_address = (uint32_t) &(hgfxmmu->Instance->LUT[(2U * lutLine->LineNumber) + 1U]); + + /* Configure LUT line */ + if (lutLine->LineStatus == GFXMMU_LUT_LINE_ENABLE) + { + /* Enable and configure LUT line */ + *((uint32_t *)lutxl_address) = (lutLine->LineStatus | + (lutLine->FirstVisibleBlock << GFXMMU_LUTXL_FVB_OFFSET) | + (lutLine->LastVisibleBlock << GFXMMU_LUTXL_LVB_OFFSET)); + *((uint32_t *)lutxh_address) = (uint32_t) lutLine->LineOffset; + } + else + { + /* Disable LUT line */ + *((uint32_t *)lutxl_address) = 0U; + *((uint32_t *)lutxh_address) = 0U; + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to modify physical buffer addresses. + * @param hgfxmmu GFXMMU handle. + * @param Buffers Buffers parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_ModifyBuffers(GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_BuffersTypeDef *Buffers) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(Buffers->Buf0Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(Buffers->Buf1Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(Buffers->Buf2Address)); + assert_param(IS_GFXMMU_BUFFER_ADDRESS(Buffers->Buf3Address)); + + /* Check GFXMMU state */ + if (hgfxmmu->State != HAL_GFXMMU_STATE_READY) + { + status = HAL_ERROR; + } + else + { + /* Modify physical buffer addresses on GFXMMU_BxCR registers */ + hgfxmmu->Instance->B0CR = Buffers->Buf0Address; + hgfxmmu->Instance->B1CR = Buffers->Buf1Address; + hgfxmmu->Instance->B2CR = Buffers->Buf2Address; + hgfxmmu->Instance->B3CR = Buffers->Buf3Address; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to configure packing. + * @param hgfxmmu GFXMMU handle. + * @param pPacking Packing parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXMMU_ConfigPacking(GFXMMU_HandleTypeDef *hgfxmmu, const GFXMMU_PackingTypeDef *pPacking) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_GFXMMU_ALL_INSTANCE(hgfxmmu->Instance)); + assert_param(IS_FUNCTIONAL_STATE(pPacking->Buffer0Activation)); + assert_param(IS_FUNCTIONAL_STATE(pPacking->Buffer1Activation)); + assert_param(IS_FUNCTIONAL_STATE(pPacking->Buffer2Activation)); + assert_param(IS_FUNCTIONAL_STATE(pPacking->Buffer3Activation)); + assert_param(IS_GFXMMU_PACKING_MODE(pPacking->Buffer0Mode)); + assert_param(IS_GFXMMU_PACKING_MODE(pPacking->Buffer1Mode)); + assert_param(IS_GFXMMU_PACKING_MODE(pPacking->Buffer2Mode)); + assert_param(IS_GFXMMU_PACKING_MODE(pPacking->Buffer3Mode)); + assert_param(IS_GFXMMU_DEFAULT_ALPHA_VALUE(pPacking->DefaultAlpha)); + + /* Check GFXMMU state */ + if (hgfxmmu->State != HAL_GFXMMU_STATE_READY) + { + status = HAL_ERROR; + } + /* Check block size is set to 12-byte*/ + else if ((hgfxmmu->Instance->CR & GFXMMU_CR_BS) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t reg_value = 0U; + + /* Configure packing for all buffers on GFXMMU_CR register */ + if (pPacking->Buffer0Activation == ENABLE) + { + reg_value |= ((pPacking->Buffer0Mode << GFXMMU_CR_B0PM_Pos) | GFXMMU_CR_B0PE); + } + if (pPacking->Buffer1Activation == ENABLE) + { + reg_value |= ((pPacking->Buffer1Mode << GFXMMU_CR_B1PM_Pos) | GFXMMU_CR_B1PE); + } + if (pPacking->Buffer2Activation == ENABLE) + { + reg_value |= ((pPacking->Buffer2Mode << GFXMMU_CR_B2PM_Pos) | GFXMMU_CR_B2PE); + } + if (pPacking->Buffer3Activation == ENABLE) + { + reg_value |= ((pPacking->Buffer3Mode << GFXMMU_CR_B3PM_Pos) | GFXMMU_CR_B3PE); + } + hgfxmmu->Instance->CR &= ~(GFXMMU_CR_B0PE_Msk | GFXMMU_CR_B0PM_Msk | + GFXMMU_CR_B1PE_Msk | GFXMMU_CR_B1PM_Msk | + GFXMMU_CR_B2PE_Msk | GFXMMU_CR_B2PM_Msk | + GFXMMU_CR_B3PE_Msk | GFXMMU_CR_B3PM_Msk); + hgfxmmu->Instance->CR |= reg_value; + + /* Configure default alpha value on GFXMMU_DAR register */ + hgfxmmu->Instance->DAR = pPacking->DefaultAlpha; + } + /* Return function status */ + return status; +} + +/** + * @brief This function handles the GFXMMU interrupts. + * @param hgfxmmu GFXMMU handle. + * @retval None. + */ +void HAL_GFXMMU_IRQHandler(GFXMMU_HandleTypeDef *hgfxmmu) +{ + uint32_t flags, interrupts, error; + + /* Read current flags and interrupts and determine which error occurs */ + flags = hgfxmmu->Instance->SR; + interrupts = (hgfxmmu->Instance->CR & GFXMMU_CR_ITS_MASK); + error = (flags & interrupts); + + if (error != 0U) + { + /* Clear flags on GFXMMU_FCR register */ + hgfxmmu->Instance->FCR = error; + + /* Update GFXMMU error code */ + hgfxmmu->ErrorCode |= error; + + /* Call GFXMMU error callback */ +#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1) + hgfxmmu->ErrorCallback(hgfxmmu); +#else + HAL_GFXMMU_ErrorCallback(hgfxmmu); +#endif /* USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1 */ + } +} + +/** + * @brief Error callback. + * @param hgfxmmu GFXMMU handle. + * @retval None. + */ +__weak void HAL_GFXMMU_ErrorCallback(GFXMMU_HandleTypeDef *hgfxmmu) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxmmu); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_GFXMMU_ErrorCallback could be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup GFXMMU_Exported_Functions_Group3 State functions + * @brief GFXMMU state functions + * +@verbatim + ============================================================================== + ##### State functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Get GFXMMU handle state. + (+) Get GFXMMU error code. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to get the current GFXMMU handle state. + * @param hgfxmmu GFXMMU handle. + * @retval GFXMMU state. + */ +HAL_GFXMMU_StateTypeDef HAL_GFXMMU_GetState(const GFXMMU_HandleTypeDef *hgfxmmu) +{ + /* Return GFXMMU handle state */ + return hgfxmmu->State; +} + +/** + * @brief This function allows to get the current GFXMMU error code. + * @param hgfxmmu GFXMMU handle. + * @retval GFXMMU error code. + */ +uint32_t HAL_GFXMMU_GetError(GFXMMU_HandleTypeDef *hgfxmmu) +{ + uint32_t error_code; + + /* Enter in critical section */ + __disable_irq(); + + /* Store and reset GFXMMU error code */ + error_code = hgfxmmu->ErrorCode; + hgfxmmu->ErrorCode = GFXMMU_ERROR_NONE; + + /* Exit from critical section */ + __enable_irq(); + + /* Return GFXMMU error code */ + return error_code; +} + +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ +#endif /* GFXMMU */ +#endif /* HAL_GFXMMU_MODULE_ENABLED */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxtim.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxtim.c new file mode 100644 index 000000000..f423bd099 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gfxtim.c @@ -0,0 +1,2032 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gfxtim.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Multi-function Digital Filter (GFXTIM) + * peripheral: + * + Initialization and de-initialization + * + Integrated frame and line clock generation + * + One absolute frame counter with one compare channel + * + Two auto reload relative frame counter + * + One line timer with two compare channel + * + External Tearing Effect line management & synchronization + * + Four programmable event generators with external trigger generation + * + One watchdog counter + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Initialization and de-initialization *** + ============================================ + [..] + (#) User has first to initialize GFXTIM. + (#) As prerequisite, fill in the HAL_GFXTIM_MspInit() : + (++) Enable GFXTIM with __HAL_RCC_GFXTIM_CLK_ENABLE + (++) Enable the clocks for the used GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (++) Configure these pins in alternate mode using HAL_GPIO_Init(). + (++) If interrupt mode is used, enable and configure GFXTIM + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + + [..] + (#) User can de-initialize GFXTIM with HAL_GFXTIM_DeInit() function. + + *** generic functions *** + ========================= + [..] + (#) HAL_GFXTIM_IRQHandler will be called when GFXTIM interrupt occurs. + (#) HAL_GFXTIM_ErrorCallback will be called when GFXTIM or ADF error occurs. + (#) Use HAL_GFXTIM_GetState() to get the current GFXTIM or ADF instance state. + (#) Use HAL_GFXTIM_GetErrorCode() to get the current GFXTIM or ADF instance error code. + + + +#if defined(GENERATOR_CALLBACKS_REGISTERING_AVAILABLE) + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_GFXTIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_GFXTIM_RegisterCallback() to register an interrupt callback. + + Function @ref HAL_GFXTIM_RegisterCallback() registers following callbacks: + (+) HAL_GFXTIM_AbsoluteTimer_AFCC1Callback + (+) HAL_GFXTIM_AbsoluteTimer_AFCOFCallback + (+) HAL_GFXTIM_AbsoluteTimer_ALCC1Callback + (+) HAL_GFXTIM_AbsoluteTimer_ALCC2Callback + (+) HAL_GFXTIM_AbsoluteTimer_ALCOFCallback + (+) HAL_GFXTIM_RelativeTimer_RFC1RCallback + (+) HAL_GFXTIM_RelativeTimer_RFC2RCallback + (+) HAL_GFXTIM_TECallback + (+) HAL_GFXTIM_EventGenerator_EV1Callback + (+) HAL_GFXTIM_EventGenerator_EV2Callback + (+) HAL_GFXTIM_EventGenerator_EV3Callback + (+) HAL_GFXTIM_EventGenerator_EV4Callback + (+) HAL_GFXTIM_WatchdogTimer_AlarmCallback + (+) HAL_GFXTIM_WatchdogTimer_PreAlarmCallback + (+) MspInitCallback + (+) MspDeInitCallback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_GFXTIM_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_GFXTIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function resets following callbacks: + (+) HAL_GFXTIM_AbsoluteTimer_AFCC1Callback + (+) HAL_GFXTIM_AbsoluteTimer_AFCOFCallback + (+) HAL_GFXTIM_AbsoluteTimer_ALCC1Callback + (+) HAL_GFXTIM_AbsoluteTimer_ALCC2Callback + (+) HAL_GFXTIM_AbsoluteTimer_ALCOFCallback + (+) HAL_GFXTIM_RelativeTimer_RFC1RCallback + (+) HAL_GFXTIM_RelativeTimer_RFC2RCallback + (+) HAL_GFXTIM_TECallback + (+) HAL_GFXTIM_EventGenerator_EV1Callback + (+) HAL_GFXTIM_EventGenerator_EV2Callback + (+) HAL_GFXTIM_EventGenerator_EV3Callback + (+) HAL_GFXTIM_EventGenerator_EV4Callback + (+) HAL_GFXTIM_WatchdogTimer_AlarmCallback + (+) HAL_GFXTIM_WatchdogTimer_PreAlarmCallback + (+) MspInitCallback + (+) MspDeInitCallback + + By default, after the HAL_GFXTIM_Init() and when the state is HAL_GFXTIM_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples @ref HAL_GFXTIM_ErrorCallback(), @ref HAL_GFXTIM_CalculateCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_GFXTIM_Init()/ @ref HAL_GFXTIM_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_GFXTIM_Init()/ @ref HAL_GFXTIM_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_GFXTIM_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_GFXTIM_STATE_READY or HAL_GFXTIM_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_GFXTIM_RegisterCallback() before calling @ref HAL_GFXTIM_DeInit() + or HAL_GFXTIM_Init() function. + + When The compilation define USE_HAL_GFXTIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. +#endif + + @endverbatim + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#ifdef HAL_GFXTIM_MODULE_ENABLED +#if defined(GFXTIM) +/** @defgroup GFXTIM GFXTIM + * @brief GFXTIM HAL module driver + * @{ + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup GFXTIM_Exported_Functions GFXTIM Exported Functions + * @{ + */ + +/** @defgroup GFXTIM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Initialize the GFXTIM instance. + (+) De-initialize the GFXTIM instance. + (+) Register and unregister callbacks. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GFXTIM instance according to the specified parameters + * in the GFXTIM_InitTypeDef structure and initialize the associated handle. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_Init(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (hgfxtim != NULL) + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_SYNC_SRC(hgfxtim->Init.SynchroSrc)); + assert_param(IS_GFXTIM_TE_SRC(hgfxtim->Init.TearingEffectSrc)); + assert_param(IS_GFXTIM_TE_POLARITY(hgfxtim->Init.TearingEffectPolarity)); + assert_param(IS_GFXTIM_INTERRUPT(hgfxtim->Init.TearingEffectInterrupt)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_RESET) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCC1Callback = HAL_GFXTIM_AbsoluteTimer_AFCC1Callback; + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCOFCallback = HAL_GFXTIM_AbsoluteTimer_AFCOFCallback; + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC1Callback = HAL_GFXTIM_AbsoluteTimer_ALCC1Callback; + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC2Callback = HAL_GFXTIM_AbsoluteTimer_ALCC2Callback; + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCOFCallback = HAL_GFXTIM_AbsoluteTimer_ALCOFCallback; + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC1RCallback = HAL_GFXTIM_RelativeTimer_RFC1RCallback; + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC2RCallback = HAL_GFXTIM_RelativeTimer_RFC2RCallback; + hgfxtim->HAL_GFXTIM_TECallback = HAL_GFXTIM_TECallback; + hgfxtim->HAL_GFXTIM_EventGenerator_EV1Callback = HAL_GFXTIM_EventGenerator_EV1Callback; + hgfxtim->HAL_GFXTIM_EventGenerator_EV2Callback = HAL_GFXTIM_EventGenerator_EV2Callback; + hgfxtim->HAL_GFXTIM_EventGenerator_EV3Callback = HAL_GFXTIM_EventGenerator_EV3Callback; + hgfxtim->HAL_GFXTIM_EventGenerator_EV4Callback = HAL_GFXTIM_EventGenerator_EV4Callback; + hgfxtim->HAL_GFXTIM_WatchdogTimer_AlarmCallback = HAL_GFXTIM_WatchdogTimer_AlarmCallback; + hgfxtim->HAL_GFXTIM_WatchdogTimer_PreAlarmCallback = HAL_GFXTIM_WatchdogTimer_PreAlarmCallback; + hgfxtim->ErrorCallback = HAL_GFXTIM_ErrorCallback; + + /* Call GFXTIM MSP init function */ + if (hgfxtim->MspInitCallback == NULL) + { + hgfxtim->MspInitCallback = HAL_GFXTIM_MspInit; + } + hgfxtim->MspInitCallback(hgfxtim); +#else /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + /* Call GFXTIM MSP init function */ + HAL_GFXTIM_MspInit(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + + /* Set Synchronization signals sources (HSYNC and VSYNC), Tearing Effect source and polarity, */ + MODIFY_REG(hgfxtim->Instance->CR, \ + GFXTIM_CR_SYNCS | GFXTIM_CR_TES | GFXTIM_CR_TEPOL, + hgfxtim->Init.SynchroSrc | hgfxtim->Init.TearingEffectSrc | hgfxtim->Init.TearingEffectPolarity); + + /* Set tearing effect interrupt */ + MODIFY_REG(hgfxtim->Instance->IER, GFXTIM_IER_TEIE, + (hgfxtim->Init.TearingEffectInterrupt << GFXTIM_IER_TEIE_Pos)); + + /* Update error code and state */ + hgfxtim->ErrorCode = GFXTIM_ERROR_NONE; + hgfxtim->State = HAL_GFXTIM_STATE_READY; + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief De-initialize the GFXTIM instance. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_DeInit(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (hgfxtim != NULL) + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Call GFXTIM MSP deinit function */ +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) + if (hgfxtim->MspDeInitCallback == NULL) + { + hgfxtim->MspDeInitCallback = HAL_GFXTIM_MspDeInit; + } + hgfxtim->MspDeInitCallback(hgfxtim); +#else /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + HAL_GFXTIM_MspDeInit(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + + /* Update state */ + hgfxtim->State = HAL_GFXTIM_STATE_RESET; + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief Initialize the GFXTIM instance MSP. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_MspInit(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_MspInit could be implemented in the user file */ +} + +/** + * @brief De-initialize the GFXTIM instance MSP. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_MspDeInit(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_MspDeInit could be implemented in the user file */ +} + +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user GFXTIM callback to be used instead of the weak predefined callback. + * @param hgfxtim GFXTIM handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_GFXTIM_AFC_COMPARE1_CB_ID Absolute frame counter compare 1 callback ID + * @arg @ref HAL_GFXTIM_AFC_OVERFLOW_CB_ID Absolute frame counter overflow callback ID + * @arg @ref HAL_GFXTIM_ALC_COMPARE1_CB_ID Absolute line counter compare 1 callback ID + * @arg @ref HAL_GFXTIM_ALC_COMPARE2_CB_ID Absolute line counter compare 2 callback ID + * @arg @ref HAL_GFXTIM_ALC_OVERFLOW_CB_ID Absolute line counter overflow callback ID + * @arg @ref HAL_GFXTIM_RFC1_RELOAD_CB_ID Relative frame counter 1 reload callback ID + * @arg @ref HAL_GFXTIM_RFC2_RELOAD_CB_ID Relative frame counter 2 reload callback ID + * @arg @ref HAL_GFXTIM_TE_CB_ID External tearing effect callback ID + * @arg @ref HAL_GFXTIM_EVENT1_CB_ID Event events 1 callback ID + * @arg @ref HAL_GFXTIM_EVENT2_CB_ID Event events 2 callback ID + * @arg @ref HAL_GFXTIM_EVENT3_CB_ID Event events 3 callback ID + * @arg @ref HAL_GFXTIM_EVENT4_CB_ID Event events 4 callback ID + * @arg @ref HAL_GFXTIM_WDG_ALARM_CB_ID Watchdog alarm callback ID + * @arg @ref HAL_GFXTIM_WDG_PREALARM_CB_ID Watchdog pre alarm callback ID + * @arg @ref HAL_GFXTIM_ERROR_CB_ID error callback ID + * @arg @ref HAL_GFXTIM_MSP_INIT_CB_ID MSP initialization user callback ID + * @arg @ref HAL_GFXTIM_MSP_DEINIT_CB_ID MSP de-initialization user callback ID + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RegisterCallback(GFXTIM_HandleTypeDef *hgfxtim, + HAL_GFXTIM_CallbackIDTypeDef CallbackID, + pGFXTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else if (pCallback == NULL) + { + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + else + { + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_GFXTIM_AFC_COMPARE1_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCC1Callback = pCallback; + break; + case HAL_GFXTIM_AFC_OVERFLOW_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCOFCallback = pCallback; + break; + case HAL_GFXTIM_ALC_COMPARE1_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC1Callback = pCallback; + break; + case HAL_GFXTIM_ALC_COMPARE2_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC2Callback = pCallback; + break; + case HAL_GFXTIM_ALC_OVERFLOW_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCOFCallback = pCallback; + break; + case HAL_GFXTIM_RFC1_RELOAD_CB_ID : + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC1RCallback = pCallback; + break; + case HAL_GFXTIM_RFC2_RELOAD_CB_ID : + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC2RCallback = pCallback; + break; + case HAL_GFXTIM_TE_CB_ID : + hgfxtim->HAL_GFXTIM_TECallback = pCallback; + break; + case HAL_GFXTIM_EVENT1_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV1Callback = pCallback; + break; + case HAL_GFXTIM_EVENT2_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV2Callback = pCallback; + break; + case HAL_GFXTIM_EVENT3_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV3Callback = pCallback; + break; + case HAL_GFXTIM_EVENT4_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV4Callback = pCallback; + break; + case HAL_GFXTIM_WDG_ALARM_CB_ID : + hgfxtim->HAL_GFXTIM_WatchdogTimer_AlarmCallback = pCallback; + break; + case HAL_GFXTIM_WDG_PREALARM_CB_ID : + hgfxtim->HAL_GFXTIM_WatchdogTimer_PreAlarmCallback = pCallback; + break; + case HAL_GFXTIM_ERROR_CB_ID : + hgfxtim->ErrorCallback = pCallback; + break; + case HAL_GFXTIM_MSP_INIT_CB_ID : + hgfxtim->MspInitCallback = pCallback; + break; + case HAL_GFXTIM_MSP_DEINIT_CB_ID : + hgfxtim->MspDeInitCallback = pCallback; + break; + default : + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (hgfxtim->State == HAL_GFXTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_GFXTIM_MSP_INIT_CB_ID : + hgfxtim->MspInitCallback = pCallback; + break; + case HAL_GFXTIM_MSP_DEINIT_CB_ID : + hgfxtim->MspDeInitCallback = pCallback; + break; + default : + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Unregister a user GFXTIM callback. + * GFXTIM callback is redirected to the weak predefined callback. + * @param hgfxtim GFXTIM handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_GFXTIM_AFC_COMPARE1_CB_ID Absolute frame counter compare 1 callback ID + * @arg @ref HAL_GFXTIM_AFC_OVERFLOW_CB_ID Absolute frame counter overflow callback ID + * @arg @ref HAL_GFXTIM_ALC_COMPARE1_CB_ID Absolute line counter compare 1 callback ID + * @arg @ref HAL_GFXTIM_ALC_COMPARE2_CB_ID Absolute line counter compare 2 callback ID + * @arg @ref HAL_GFXTIM_ALC_OVERFLOW_CB_ID Absolute line counter overflow callback ID + * @arg @ref HAL_GFXTIM_RFC1_RELOAD_CB_ID Relative frame counter 1 reload callback ID + * @arg @ref HAL_GFXTIM_RFC2_RELOAD_CB_ID Relative frame counter 2 reload callback ID + * @arg @ref HAL_GFXTIM_TE_CB_ID External tearing effect callback ID + * @arg @ref HAL_GFXTIM_EVENT1_CB_ID Event events 1 callback ID + * @arg @ref HAL_GFXTIM_EVENT2_CB_ID Event events 2 callback ID + * @arg @ref HAL_GFXTIM_EVENT3_CB_ID Event events 3 callback ID + * @arg @ref HAL_GFXTIM_EVENT4_CB_ID Event events 4 callback ID + * @arg @ref HAL_GFXTIM_WDG_ALARM_CB_ID Watchdog alarm callback ID + * @arg @ref HAL_GFXTIM_WDG_PREALARM_CB_ID Watchdog pre alarm callback ID + * @arg @ref HAL_GFXTIM_ERROR_CB_ID error callback ID + * @arg @ref HAL_GFXTIM_MSP_INIT_CB_ID MSP initialization user callback ID + * @arg @ref HAL_GFXTIM_MSP_DEINIT_CB_ID MSP de-initialization user callback ID + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_UnRegisterCallback(GFXTIM_HandleTypeDef *hgfxtim, + HAL_GFXTIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_GFXTIM_AFC_COMPARE1_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCC1Callback = HAL_GFXTIM_AbsoluteTimer_AFCC1Callback; + break; + case HAL_GFXTIM_AFC_OVERFLOW_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCOFCallback = HAL_GFXTIM_AbsoluteTimer_AFCOFCallback; + break; + case HAL_GFXTIM_ALC_COMPARE1_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC1Callback = HAL_GFXTIM_AbsoluteTimer_ALCC1Callback; + break; + case HAL_GFXTIM_ALC_COMPARE2_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC2Callback = HAL_GFXTIM_AbsoluteTimer_ALCC2Callback; + break; + case HAL_GFXTIM_ALC_OVERFLOW_CB_ID : + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCOFCallback = HAL_GFXTIM_AbsoluteTimer_ALCOFCallback; + break; + case HAL_GFXTIM_RFC1_RELOAD_CB_ID : + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC1RCallback = HAL_GFXTIM_RelativeTimer_RFC1RCallback; + break; + case HAL_GFXTIM_RFC2_RELOAD_CB_ID : + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC2RCallback = HAL_GFXTIM_RelativeTimer_RFC2RCallback; + break; + case HAL_GFXTIM_TE_CB_ID : + hgfxtim->HAL_GFXTIM_TECallback = HAL_GFXTIM_TECallback; + break; + case HAL_GFXTIM_EVENT1_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV1Callback = HAL_GFXTIM_EventGenerator_EV1Callback; + break; + case HAL_GFXTIM_EVENT2_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV2Callback = HAL_GFXTIM_EventGenerator_EV2Callback; + break; + case HAL_GFXTIM_EVENT3_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV3Callback = HAL_GFXTIM_EventGenerator_EV3Callback; + break; + case HAL_GFXTIM_EVENT4_CB_ID : + hgfxtim->HAL_GFXTIM_EventGenerator_EV4Callback = HAL_GFXTIM_EventGenerator_EV4Callback; + break; + case HAL_GFXTIM_WDG_ALARM_CB_ID : + hgfxtim->HAL_GFXTIM_WatchdogTimer_AlarmCallback = HAL_GFXTIM_WatchdogTimer_AlarmCallback; + break; + case HAL_GFXTIM_WDG_PREALARM_CB_ID : + hgfxtim->HAL_GFXTIM_WatchdogTimer_PreAlarmCallback = HAL_GFXTIM_WatchdogTimer_PreAlarmCallback; + break; + case HAL_GFXTIM_ERROR_CB_ID : + hgfxtim->ErrorCallback = HAL_GFXTIM_ErrorCallback; + break; + case HAL_GFXTIM_MSP_INIT_CB_ID : + hgfxtim->MspInitCallback = HAL_GFXTIM_MspInit; + break; + case HAL_GFXTIM_MSP_DEINIT_CB_ID : + hgfxtim->MspDeInitCallback = HAL_GFXTIM_MspDeInit; + break; + default : + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (hgfxtim->State == HAL_GFXTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_GFXTIM_MSP_INIT_CB_ID : + hgfxtim->MspInitCallback = HAL_GFXTIM_MspInit; + break; + case HAL_GFXTIM_MSP_DEINIT_CB_ID : + hgfxtim->MspDeInitCallback = HAL_GFXTIM_MspDeInit; + break; + default : + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + /* Update error code and status */ + hgfxtim->ErrorCode |= GFXTIM_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + } + + return status; +} +#endif /* #if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1) */ + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group2 Clock Generator functions + * @brief Clock Generator functions + * +@verbatim + ============================================================================== + ##### Clock Generator functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Configure the clock generator. + (+) Force reload of FCC and LCC. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures the clock generator. + * @param hgfxtim GFXTIM handle. + * @param pClockGeneratorConfig Clock Generator configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_ClockGenerator_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_ClockGeneratorConfigTypeDef *pClockGeneratorConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pClockGeneratorConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_LCC_HW_RELOAD_SRC(pClockGeneratorConfig->LCCHwReloadSrc)); + assert_param(IS_GFXTIM_LCC_RELOAD_VALUE(pClockGeneratorConfig->LCCReloadValue)); + assert_param(IS_GFXTIM_LCC_CLK_SRC(pClockGeneratorConfig->LCCClockSrc)); + assert_param(IS_GFXTIM_LINE_CLK_SRC(pClockGeneratorConfig->LineClockSrc)); + assert_param(IS_GFXTIM_FCC_HW_RELOAD_SRC(pClockGeneratorConfig->FCCHwReloadSrc)); + assert_param(IS_GFXTIM_FCC_RELOAD_VALUE(pClockGeneratorConfig->FCCReloadValue)); + assert_param(IS_GFXTIM_FCC_CLK_SRC(pClockGeneratorConfig->FCCClockSrc)); + assert_param(IS_GFXTIM_FRAME_CLK_SRC(pClockGeneratorConfig->FrameClockSrc)); + assert_param(IS_GFXTIM_LINE_CLK_CALIB(pClockGeneratorConfig->LineClockCalib)); + assert_param(IS_GFXTIM_FRAME_CLK_CALIB(pClockGeneratorConfig->FrameClockCalib)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Disable FCC and LCC */ + CLEAR_BIT(hgfxtim->Instance->CGCR, + GFXTIM_CGCR_LCCCS | GFXTIM_CGCR_FCCCS); + + /* Set Line Clock Counter (LCC) reload value (22 bits) */ + MODIFY_REG(hgfxtim->Instance->LCCRR, GFXTIM_LCCRR_RELOAD, + (pClockGeneratorConfig->LCCReloadValue << GFXTIM_LCCRR_RELOAD_Pos)); + + /* Set Frame Clock Counter (FCC) reload value (12 bits) */ + MODIFY_REG(hgfxtim->Instance->FCCRR, GFXTIM_FCCRR_RELOAD, + (pClockGeneratorConfig->FCCReloadValue << GFXTIM_FCCRR_RELOAD_Pos)); + + /* Set line and frame config */ + MODIFY_REG(hgfxtim->Instance->CGCR, + GFXTIM_CGCR_LCCHRS | GFXTIM_CGCR_LCCCS | GFXTIM_CGCR_LCS | + GFXTIM_CGCR_FCCHRS | GFXTIM_CGCR_FCCCS | GFXTIM_CGCR_FCS, + pClockGeneratorConfig->LCCHwReloadSrc | pClockGeneratorConfig->LCCClockSrc | + pClockGeneratorConfig->LineClockSrc | pClockGeneratorConfig->FCCHwReloadSrc | + pClockGeneratorConfig->FCCClockSrc | pClockGeneratorConfig->FrameClockSrc); + + /* Set debug output config for Line and frame clocks */ + MODIFY_REG(hgfxtim->Instance->CR, + GFXTIM_CR_LCCOE | GFXTIM_CR_FCCOE, + pClockGeneratorConfig->LineClockCalib | pClockGeneratorConfig->FrameClockCalib); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function force clock generator counter(s) reload + * @param hgfxtim GFXTIM handle. + * @param ClockGeneratorCounter Clock Generator counter + * This parameter can be a value of @ref GFXTIM_ClockGeneratorCounter. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_ClockGenerator_Reload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t ClockGeneratorCounter) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_CLOCK_GENERATOR_COUNTER(ClockGeneratorCounter)); + + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + SET_BIT(hgfxtim->Instance->CGCR, ClockGeneratorCounter); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + + +/** + * @brief GFXTIM Tearing effect callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_TECallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_TECallback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group3 Absolute Timer functions + * @brief Absolute Timer functions + * +@verbatim + ============================================================================== + ##### Absolute Timers functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Configure the absolute timer. + (+) Start the absolute timer. + (+) Stop the absolute timer. + (+) Reset the absolute timer counters. + (+) Get the absolute time value. + (+) Set the absolute frame compare value. + (+) Set the absolute line compare value. +@endverbatim + * @{ + */ + +/** + * @brief This function configures an absolute Timer. + * @param hgfxtim GFXTIM handle. + * @param pAbsoluteTimerConfig pointer to a GFXTIM_AbsoluteTimerConfigTypeDef structure that + * contains absoluite timer comparators and counters values. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_AbsoluteTimerConfigTypeDef *pAbsoluteTimerConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pAbsoluteTimerConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_ABSOLUTE_FRAME_VALUE(pAbsoluteTimerConfig->FrameCompare1Value)); + assert_param(IS_GFXTIM_ABSOLUTE_FRAME_VALUE(pAbsoluteTimerConfig->FrameCounterValue)); + assert_param(IS_GFXTIM_INTERRUPT(pAbsoluteTimerConfig->FrameOverflowInterrupt)); + assert_param(IS_GFXTIM_INTERRUPT(pAbsoluteTimerConfig->FrameCompare1Interrupt)); + assert_param(IS_GFXTIM_ABSOLUTE_LINE_VALUE(pAbsoluteTimerConfig->LineCompare1Value)); + assert_param(IS_GFXTIM_ABSOLUTE_LINE_VALUE(pAbsoluteTimerConfig->LineCompare2Value)); + assert_param(IS_GFXTIM_ABSOLUTE_LINE_VALUE(pAbsoluteTimerConfig->LineCounterValue)); + assert_param(IS_GFXTIM_INTERRUPT(pAbsoluteTimerConfig->LineOverflowInterrupt)); + assert_param(IS_GFXTIM_INTERRUPT(pAbsoluteTimerConfig->LineCompare1Interrupt)); + assert_param(IS_GFXTIM_INTERRUPT(pAbsoluteTimerConfig->LineCompare2Interrupt)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + + /* Set AFC compare 1 value */ + MODIFY_REG(hgfxtim->Instance->AFCC1R, GFXTIM_AFCC1R_FRAME, + (pAbsoluteTimerConfig->FrameCompare1Value << GFXTIM_AFCC1R_FRAME_Pos)); + + /* Set AFC counter value */ + MODIFY_REG(hgfxtim->Instance->AFCR, GFXTIM_AFCR_FRAME, + (pAbsoluteTimerConfig->FrameCounterValue << GFXTIM_AFCR_FRAME_Pos)); + + /* Set ALC compare 1 value */ + MODIFY_REG(hgfxtim->Instance->ALCC1R, GFXTIM_ALCC1R_LINE, + (pAbsoluteTimerConfig->LineCompare1Value << GFXTIM_ALCC1R_LINE_Pos)); + + /* Set ALC compare 2 value */ + MODIFY_REG(hgfxtim->Instance->ALCC2R, GFXTIM_ALCC2R_LINE, + (pAbsoluteTimerConfig->LineCompare2Value << GFXTIM_ALCC2R_LINE_Pos)); + + /* Set ALC counter value */ + MODIFY_REG(hgfxtim->Instance->ALCR, GFXTIM_ALCR_LINE, + (pAbsoluteTimerConfig->LineCounterValue << GFXTIM_ALCR_LINE_Pos)); + + /* Set ALC compare 1, compare 2, overflow interrupts, AFC compare 1 and overflow interrupts */ + MODIFY_REG(hgfxtim->Instance->IER, + GFXTIM_IER_ALCC1IE | GFXTIM_IER_ALCC2IE | GFXTIM_IER_ALCOIE | GFXTIM_IER_AFCC1IE | GFXTIM_IER_AFCOIE, + (pAbsoluteTimerConfig->FrameOverflowInterrupt << GFXTIM_IER_AFCOIE_Pos) | + (pAbsoluteTimerConfig->FrameCompare1Interrupt << GFXTIM_IER_AFCC1IE_Pos) | + (pAbsoluteTimerConfig->LineOverflowInterrupt << GFXTIM_IER_ALCOIE_Pos) | + (pAbsoluteTimerConfig->LineCompare1Interrupt << GFXTIM_IER_ALCC1IE_Pos) | + (pAbsoluteTimerConfig->LineCompare2Interrupt << GFXTIM_IER_ALCC2IE_Pos)); + } + else + { + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function starts absolute timer. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Start(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Enable absolute Timer */ + SET_BIT(hgfxtim->Instance->TCR, (GFXTIM_TCR_AFCEN | GFXTIM_TCR_ALCEN)); + } + else + { + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function stops absolute timer counter(s). + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Stop(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Disable absolute counter(s) */ + SET_BIT(hgfxtim->Instance->TDR, (GFXTIM_TDR_ALCDIS | GFXTIM_TDR_AFCDIS)); + } + else + { + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function resets absolute timer counters. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_Reset(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Disable absolute counter(s) */ + SET_BIT(hgfxtim->Instance->TCR, (GFXTIM_TCR_FAFCR | GFXTIM_TCR_FALCR)); + } + else + { + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function gets absolute timer value. + * @param hgfxtim GFXTIM handle. + * @param AbsoluteTime absolute time + * This parameter can be a value of @ref GFXTIM_AbsoluteTime. + * @param pValue Absolute time value + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_GetCounter(const GFXTIM_HandleTypeDef *hgfxtim, uint32_t AbsoluteTime, + uint32_t *pValue) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pValue == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_ABSOLUTE_TIME(AbsoluteTime)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + switch (AbsoluteTime) + { + case GFXTIM_ABSOLUTE_GLOBAL_TIME: + *pValue = READ_REG(hgfxtim->Instance->ATR); + break; + case GFXTIM_ABSOLUTE_FRAME_TIME: + *pValue = READ_REG(hgfxtim->Instance->AFCR); + break; + default: + /* GFXTIM_ABSOLUTE_LINE_TIME */ + *pValue = READ_REG(hgfxtim->Instance->ALCR); + break; + } + } + else + { + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief This function sets absolute frame compare value. + * @param hgfxtim GFXTIM handle. + * @param Value Absolute frame compare 1 value + * This parameter can be a number between Min_Data = 0x00000 and Max_Data = 0xFFFFF + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_SetFrameCompare(GFXTIM_HandleTypeDef *hgfxtim, uint32_t Value) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Set absolute frame counter compare 1 register value */ + MODIFY_REG(hgfxtim->Instance->AFCC1R, GFXTIM_AFCC1R_FRAME, + (Value << GFXTIM_AFCC1R_FRAME_Pos)); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function sets line compare value. + * @param hgfxtim GFXTIM handle. + * @param AbsoluteLineComparator Absolute line compare value + * This parameter can be a value of @ref GFXTIM_AbsoluteLineComparator. + * @param Value Absolute line compare value + * This parameter can be a number between Min_Data = 0x000 and Max_Data = 0xFFF + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_AbsoluteTimer_SetLineCompare(GFXTIM_HandleTypeDef *hgfxtim, + uint32_t AbsoluteLineComparator, uint32_t Value) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_ABSOLUTE_LINE_COMPARATOR(AbsoluteLineComparator)); + assert_param(IS_GFXTIM_ABSOLUTE_LINE_VALUE(Value)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + switch (AbsoluteLineComparator) + { + case GFXTIM_ABSOLUTE_LINE_COMPARE1: + WRITE_REG(hgfxtim->Instance->ALCC1R, Value); + break; + default: + /* GFXTIM_ABSOLUTE_LINE_COMPARE2 */ + WRITE_REG(hgfxtim->Instance->ALCC2R, Value); + break; + } + } + else + { + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief GFXTIM Absolute frame counter overflow callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_AbsoluteTimer_AFCOFCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_AbsoluteTimer_AFCOFCallback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Absolute frame counter compare 1 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_AbsoluteTimer_AFCC1Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_AbsoluteTimer_AFCC1Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Absolute line counter compare 1 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_AbsoluteTimer_ALCC1Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_AbsoluteTimer_ALCC1Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Absolute line counter compare 2 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_AbsoluteTimer_ALCC2Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_AbsoluteTimer_ALCC2Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Absolute line counter overflow callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_AbsoluteTimer_ALCOFCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_AbsoluteTimer_ALCOFCallback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group4 Relative Timer functions + * @brief Clock Generator functions + * +@verbatim + ============================================================================== + ##### Relative Timer functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Configure a relative timer. + (+) Start a relative timer counter. + (+) Stop a relative timer counter. + (+) Force a relative timer counter reload. + (+) Set a relative timer reload value. + (+) Get a relative timer counter value. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures a Relative Timer. + * @param hgfxtim GFXTIM handle. + * @param pRelativeTimerConfig pointer to a GFXTIM_RelativeTimerConfigTypeDef structure that + * contains relative timer comparators and counters values. + * @param RelativeTimer Relative Timer identifier + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_RelativeTimerConfigTypeDef *pRelativeTimerConfig, + uint32_t RelativeTimer) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pRelativeTimerConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_FRAME_VALUE(pRelativeTimerConfig->AutoReloadValue)); + assert_param(IS_GFXTIM_RELATIVE_FRAME_VALUE(pRelativeTimerConfig->CounterMode)); + assert_param(IS_GFXTIM_INTERRUPT(pRelativeTimerConfig->ReloadInterrupt)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Set RFC1 auto reload */ + MODIFY_REG(hgfxtim->Instance->RFC1RR, GFXTIM_RFC1RR_FRAME, + pRelativeTimerConfig->AutoReloadValue << GFXTIM_RFC1RR_FRAME_Pos); + + /* Set relative timer mode */ + MODIFY_REG(hgfxtim->Instance->TCR, GFXTIM_TCR_RFC1CM, + (pRelativeTimerConfig->CounterMode << GFXTIM_TCR_RFC1CM_Pos)); + + /* Set relative timer 1 interrupt */ + MODIFY_REG(hgfxtim->Instance->IER, GFXTIM_IER_RFC1RIE_Msk, + (pRelativeTimerConfig->ReloadInterrupt << GFXTIM_IER_RFC1RIE_Pos)); + } + else + { + /* Set RFC2 auto reload */ + MODIFY_REG(hgfxtim->Instance->RFC2RR, GFXTIM_RFC2RR_FRAME, + pRelativeTimerConfig->AutoReloadValue << GFXTIM_RFC2RR_FRAME_Pos); + + /* Set relative timer mode */ + MODIFY_REG(hgfxtim->Instance->TCR, GFXTIM_TCR_RFC2CM, + (pRelativeTimerConfig->CounterMode << GFXTIM_TCR_RFC2CM_Pos)); + + /* Set relative timer 2 interrupt */ + MODIFY_REG(hgfxtim->Instance->IER, GFXTIM_IER_RFC2RIE_Msk, + (pRelativeTimerConfig->ReloadInterrupt << GFXTIM_IER_RFC2RIE_Pos)); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function starts a relative Timer. + * @param hgfxtim GFXTIM handle. + * @param RelativeTimer Relative timer counter to Enable + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Start(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Enable relative timer 1 */ + SET_BIT(hgfxtim->Instance->TCR, GFXTIM_TCR_RFC1EN); + } + else + { + /* Enable relative timer 2 */ + SET_BIT(hgfxtim->Instance->TCR, GFXTIM_TCR_RFC2EN); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function stops a relative Timer counter. + * @param hgfxtim GFXTIM handle. + * @param RelativeTimer Relative timer counter to Disable + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_Stop(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Disable relative timer 1 */ + SET_BIT(hgfxtim->Instance->TDR, GFXTIM_TDR_RFC1DIS); + } + else + { + /* Disable relative timer 2 */ + SET_BIT(hgfxtim->Instance->TDR, GFXTIM_TDR_RFC2DIS); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + + +/** + * @brief This function force a relative Timer reload. + * @param hgfxtim GFXTIM handle. + * @param RelativeTimer Relative timer to Foce Reload + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_ForceReload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Force relative timer 1 reload */ + SET_BIT(hgfxtim->Instance->TCR, GFXTIM_TCR_FRFC1R); + } + else + { + /* Force relative timer 2 reload*/ + SET_BIT(hgfxtim->Instance->TCR, GFXTIM_TCR_FRFC2R); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + + +/** + * @brief This function sets Relative frame timer reload value. + * @param hgfxtim GFXTIM handle. + * @param RelativeTimer specifies the Auto-reload register to be modified. + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @param Value Reload value + * This parameter can be a number between Min_Data = 0x000 and Max_Data = 0xFFF + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_SetReload(GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer, + uint32_t Value) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_FRAME_VALUE(Value)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Set RFC1 auto reload */ + WRITE_REG(hgfxtim->Instance->RFC1RR, Value); + } + else + { + /* Set RFC2 auto reload */ + WRITE_REG(hgfxtim->Instance->RFC2RR, Value); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function sets Relative frame timer compare value. + * @param hgfxtim GFXTIM handle. + * @param RelativeTimer Relative frame counter reload + * This parameter can be a value of @ref GFXTIM_RelativeTimer. + * @param pValue pointer to a relative frame counter value + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_RelativeTimer_GetCounter(const GFXTIM_HandleTypeDef *hgfxtim, uint32_t RelativeTimer, + uint32_t *pValue) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pValue == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_RELATIVE_TIMER(RelativeTimer)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + if (RelativeTimer == GFXTIM_RELATIVE_TIMER1) + { + /* Set RFC1 auto reload */ + *pValue = READ_REG(hgfxtim->Instance->RFC1R); + } + else + { + /* Set RFC2 auto reload */ + *pValue = READ_REG(hgfxtim->Instance->RFC2R); + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + + + + +/** + * @brief GFXTIM Relative frame counter 1 reload callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_RelativeTimer_RFC1RCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_RelativeTimer_RFC1RCallback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Relative frame counter 2 reload callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_RelativeTimer_RFC2RCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_RelativeTimer_RFC2RCallback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group5 Event Generator functions + * @brief Event Generator functions + * +@verbatim + ============================================================================== + ##### Event Generator functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Configure an Event Generator. + (+) Enable an Event Generator. + (+) Disable an Event Generator. +@endverbatim + * @{ + */ + +/** + * @brief This function configures an Event Generator. + * @param hgfxtim GFXTIM handle. + * @param EventGenerator Event Generator + * This parameter can be a value of @ref GFXTIM_EventGenerator. + * @param pEventGeneratorConfig pointer to a GFXTIM_EventGeneratorConfigTypeDef structure that + * contains Event Generator configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Config(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator, + const GFXTIM_EventGeneratorConfigTypeDef *pEventGeneratorConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t shift; + + if ((hgfxtim == NULL) || (pEventGeneratorConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_EVENT_GENERATOR(EventGenerator)); + assert_param(IS_GFXTIM_EVENT_LINE(pEventGeneratorConfig->LineEvent)); + assert_param(IS_GFXTIM_EVENT_FRAME(pEventGeneratorConfig->FrameEvent)); + assert_param(IS_GFXTIM_INTERRUPT(pEventGeneratorConfig->EventInterrupt)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Select frame and line events */ + shift = (EventGenerator) * 8U; + MODIFY_REG(hgfxtim->Instance->EVSR, \ + ((GFXTIM_EVSR_LES1 | GFXTIM_EVSR_FES1) << shift), + ((pEventGeneratorConfig->LineEvent | pEventGeneratorConfig->FrameEvent) << shift)); + + /* Event interrupt */ + MODIFY_REG(hgfxtim->Instance->IER, \ + (GFXTIM_IER_EV1IE << (EventGenerator)), \ + (pEventGeneratorConfig->EventInterrupt << (EventGenerator + GFXTIM_IER_EV1IE_Pos))); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function enables an Event Generator. + * @param hgfxtim GFXTIM handle. + * @param EventGenerator Event Generator + * This parameter can be a value of @ref GFXTIM_EventGenerator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Enable(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_EVENT_GENERATOR(EventGenerator)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Enable event generator */ + SET_BIT(hgfxtim->Instance->EVCR, GFXTIM_EVCR_EV1EN << EventGenerator); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function disables an Event Generator. + * @param hgfxtim GFXTIM handle. + * @param EventGenerator Event Generator + * This parameter can be a value of @ref GFXTIM_EventGenerator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_EventGenerator_Disable(GFXTIM_HandleTypeDef *hgfxtim, uint32_t EventGenerator) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_EVENT_GENERATOR(EventGenerator)); + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Disable event generator */ + CLEAR_BIT(hgfxtim->Instance->EVCR, GFXTIM_EVCR_EV1EN << EventGenerator); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + + + +/** + * @brief GFXTIM Combined events 1 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_EventGenerator_EV1Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_EventGenerator_EV1Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Combined events 2 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_EventGenerator_EV2Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_EventGenerator_EV2Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Combined events 3 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_EventGenerator_EV3Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_EventGenerator_EV3Callback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Combined events 4 callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_EventGenerator_EV4Callback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_EventGenerator_EV4Callback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group6 Watchdog functions + * @brief Event Generator functions + * +@verbatim + ============================================================================== + ##### Watchdog functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Configure the Watchdog. + (+) Enable the Watchdog + (+) Disable the Watchdog. + (+) Refresh the Watchdog. +@endverbatim + * @{ + */ + +/** + * @brief This function configures the Watchdog. + * @param hgfxtim GFXTIM handle. + * @param pWatchdogConfig Watchdog configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Config(GFXTIM_HandleTypeDef *hgfxtim, + const GFXTIM_WatchdogConfigTypeDef *pWatchdogConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hgfxtim == NULL) || (pWatchdogConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + assert_param(IS_GFXTIM_WATCHDOG_CLOCK_SRC(pWatchdogConfig->ClockSrc)); + assert_param(IS_GFXTIM_WATCHDOG_HW_RELOAD_CONFIG(pWatchdogConfig->HwReloadConfig)); + + assert_param(IS_GFXTIM_WATCHDOG_VALUE(pWatchdogConfig->AutoReloadValue)); + assert_param(IS_GFXTIM_WATCHDOG_VALUE(pWatchdogConfig->PreAlarmValue)); + + assert_param(IS_GFXTIM_INTERRUPT(pWatchdogConfig->AlarmInterrupt)); + assert_param(IS_GFXTIM_INTERRUPT(pWatchdogConfig->PreAlarmInterrupt)); + + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Set watchdog auto reload value */ + MODIFY_REG(hgfxtim->Instance->WDGRR, GFXTIM_WDGRR_RELOAD, + (pWatchdogConfig->AutoReloadValue << GFXTIM_WDGRR_RELOAD_Pos)); + + /* Set watchdog pre alarm value */ + MODIFY_REG(hgfxtim->Instance->WDGPAR, GFXTIM_WDGPAR_PREALARM, + pWatchdogConfig->PreAlarmValue << GFXTIM_WDGPAR_PREALARM_Pos); + + /* Set watchdog clock source and hardware reload */ + MODIFY_REG(hgfxtim->Instance->WDGTCR, (GFXTIM_WDGTCR_WDGCS | GFXTIM_WDGTCR_WDGHRC), + (pWatchdogConfig->ClockSrc | pWatchdogConfig->HwReloadConfig)); + + /* Set watchdog interrupts */ + MODIFY_REG(hgfxtim->Instance->IER, \ + (GFXTIM_IER_WDGAIE | GFXTIM_IER_WDGPIE), \ + ((pWatchdogConfig->AlarmInterrupt << GFXTIM_IER_WDGAIE_Pos) | \ + (pWatchdogConfig->PreAlarmInterrupt << GFXTIM_IER_WDGPIE_Pos))); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function Enable the Watchdog Counter. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Enable(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Set watchdog enable bit */ + SET_BIT(hgfxtim->Instance->WDGTCR, GFXTIM_WDGTCR_WDGEN); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function Disable the Watchdog Counter. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Disable(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Set watchdog disable bit */ + SET_BIT(hgfxtim->Instance->WDGTCR, GFXTIM_WDGTCR_WDGDIS); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief This function refresh the Watchdog counter. + * @param hgfxtim GFXTIM handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_GFXTIM_WatchdogTimer_Refresh(GFXTIM_HandleTypeDef *hgfxtim) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hgfxtim == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_GFXTIM_ALL_INSTANCE(hgfxtim->Instance)); + + + if (hgfxtim->State == HAL_GFXTIM_STATE_READY) + { + /* Set watchdog SW relaod */ + SET_BIT(hgfxtim->Instance->WDGTCR, GFXTIM_WDGTCR_FWDGR); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief GFXTIM Watchdog alarm callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_WatchdogTimer_AlarmCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_WatchdogTimer_AlarmCallback could be implemented in the user file */ +} + +/** + * @brief GFXTIM Watchdog pre alarm callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_WatchdogTimer_PreAlarmCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_WatchdogTimer_PreAlarmCallback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup GFXTIM_Exported_Functions_Group7 Generic functions + * @brief Generic functions + * +@verbatim + ============================================================================== + ##### Generic functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Handle GFXTIM interrupt. + (+) Inform user that error occurs. + (+) Get the current GFXTIM instance state + (+) Get the current GFXTIM instance error code. +@endverbatim + * @{ + */ + +/** + * @brief This function handles the GFXTIM interrupts. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +void HAL_GFXTIM_IRQHandler(GFXTIM_HandleTypeDef *hgfxtim) +{ + uint32_t tmp_reg1; + uint32_t tmp_reg2; + uint32_t interrupts; + + /* Read all pending interrupts */ + tmp_reg1 = READ_REG(hgfxtim->Instance->ISR); + tmp_reg2 = READ_REG(hgfxtim->Instance->IER); + interrupts = tmp_reg1 & tmp_reg2; + + if ((interrupts & GFXTIM_ISR_AFCC1F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCC1Callback(hgfxtim); +#else + HAL_GFXTIM_AbsoluteTimer_AFCC1Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_AFCOF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_AbsoluteTimer_AFCOFCallback(hgfxtim); +#else + HAL_GFXTIM_AbsoluteTimer_AFCOFCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_ALCC1F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC1Callback(hgfxtim); +#else + HAL_GFXTIM_AbsoluteTimer_ALCC1Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_ALCC2F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCC2Callback(hgfxtim); +#else + HAL_GFXTIM_AbsoluteTimer_ALCC2Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_ALCOF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_AbsoluteTimer_ALCOFCallback(hgfxtim); +#else + HAL_GFXTIM_AbsoluteTimer_ALCOFCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_TEF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_TECallback(hgfxtim); +#else + HAL_GFXTIM_TECallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_RFC1RF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC1RCallback(hgfxtim); +#else + HAL_GFXTIM_RelativeTimer_RFC1RCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_RFC2RF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_RelativeTimer_RFC2RCallback(hgfxtim); +#else + HAL_GFXTIM_RelativeTimer_RFC2RCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_EV1F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_EventGenerator_EV1Callback(hgfxtim); +#else + HAL_GFXTIM_EventGenerator_EV1Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_EV2F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_EventGenerator_EV2Callback(hgfxtim); +#else + HAL_GFXTIM_EventGenerator_EV2Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_EV3F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_EventGenerator_EV3Callback(hgfxtim); +#else + HAL_GFXTIM_EventGenerator_EV3Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_EV4F) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_EventGenerator_EV4Callback(hgfxtim); +#else + HAL_GFXTIM_EventGenerator_EV4Callback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_WDGAF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_WatchdogTimer_AlarmCallback(hgfxtim); +#else + HAL_GFXTIM_WatchdogTimer_AlarmCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + + if ((interrupts & GFXTIM_ISR_WDGPF) != 0U) + { +#if (USE_HAL_GFXTIM_REGISTER_CALLBACKS == 1U) + hgfxtim->HAL_GFXTIM_WatchdogTimer_PreAlarmCallback(hgfxtim); +#else + HAL_GFXTIM_WatchdogTimer_PreAlarmCallback(hgfxtim); +#endif /* USE_HAL_GFXTIM_REGISTER_CALLBACKS */ + } + /* Clear all pending interrupts */ + WRITE_REG(hgfxtim->Instance->ICR, interrupts); +} + +/** + * @brief GFXTIM error callback. + * @param hgfxtim GFXTIM handle. + * @retval None. + */ +__weak void HAL_GFXTIM_ErrorCallback(GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgfxtim); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_GFXTIM_ErrorCallback could be implemented in the user file. */ +} + +/** + * @brief This function get the current GFXTIM state. + * @param hgfxtim GFXTIM handle. + * @retval GFXTIM state. + */ +HAL_GFXTIM_StateTypeDef HAL_GFXTIM_GetState(const GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Return GFXTIM state */ + return hgfxtim->State; +} + +/** + * @brief This function get the current GFXTIM error. + * @param hgfxtim GFXTIM handle. + * @retval GFXTIM error code. + */ +uint32_t HAL_GFXTIM_GetError(const GFXTIM_HandleTypeDef *hgfxtim) +{ + /* Return GFXTIM error code */ + return hgfxtim->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* GFXTIM */ +#endif /* HAL_GFXTIM_MODULE_ENABLED */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpio.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpio.c new file mode 100644 index 000000000..ef62f421e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpio.c @@ -0,0 +1,555 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 39 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To set the level of several pins and reset level of several other pins in + same cycle, use HAL_GPIO_WriteMultipleStatePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants + * @{ + */ +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, const GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * GPIO_OSPEEDR_OSPEED1_Pos)); + temp |= (GPIO_Init->Speed << (position * GPIO_OSPEEDR_OSPEED1_Pos)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * GPIO_PUPDR_PUPD1_Pos)); + temp |= ((GPIO_Init->Pull) << (position * GPIO_PUPDR_PUPD1_Pos)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * GPIO_AFRL_AFSEL1_Pos)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * GPIO_AFRL_AFSEL1_Pos)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * GPIO_MODER_MODE1_Pos)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * GPIO_MODER_MODE1_Pos)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + { + temp = SBS->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << ((position & 0x03u) * SBS_EXTICR1_PC_EXTI1_Pos)); + temp |= (GPIO_GET_INDEX(GPIOx) << ((position & 0x03u) * SBS_EXTICR1_PC_EXTI1_Pos)); + SBS->EXTICR[position >> 2u] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SBS->EXTICR[position >> 2u]; + tmp &= (0x0FuL << ((position & 0x03u) * SBS_EXTICR1_PC_EXTI1_Pos)); + if (tmp == (GPIO_GET_INDEX(GPIOx) << ((position & 0x03u) * SBS_EXTICR1_PC_EXTI1_Pos))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + /* Clear EXTICR configuration */ + tmp = 0x0FuL << ((position & 0x03u) * SBS_EXTICR1_PC_EXTI1_Pos); + SBS->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * GPIO_MODER_MODE1_Pos)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * GPIO_AFRL_AFSEL1_Pos)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * GPIO_OSPEEDR_OSPEED1_Pos)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * GPIO_PUPDR_PUPD1_Pos)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(const GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Set and clear several pins of a dedicated port in same cycle. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param PinReset specifies the port bits to be reset + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero. + * @param PinSet specifies the port bits to be set + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero. + * @note Both PinReset and PinSet combinations shall not get any common bit, else + * assert would be triggered. + * @note At least one of the two parameters used to set or reset shall be different from zero. + * @retval None + */ +void HAL_GPIO_WriteMultipleStatePin(GPIO_TypeDef *GPIOx, uint16_t PinReset, uint16_t PinSet) +{ + uint32_t tmp; + + /* Check the parameters */ + /* Make sure at least one parameter is different from zero and that there is no common pin */ + assert_param(IS_GPIO_PIN((uint32_t)PinReset | (uint32_t)PinSet)); + assert_param(IS_GPIO_COMMON_PIN(PinReset, PinSet)); + + tmp = (((uint32_t)PinReset << 16) | PinSet); + GPIOx->BSRR = tmp; +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Pin specifies the pin to be toggled. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..H and M..P) to select the GPIO peripheral for STM32H7RSxx family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0U) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpu2d.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpu2d.c new file mode 100644 index 000000000..a2eb7a880 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_gpu2d.c @@ -0,0 +1,750 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_gpu2d.c + * @author MCD Application Team + * @brief GPU2D HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the GPU2D peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Peripheral control is exclusively done by the accompanying middleware library. + + *** Interrupt mode IO operation *** + =================================== + [..] + (#) Configure the GPU2D hardware to perform graphics operation using the Third Party MW + Library APIs. + (#) Submit command List to the hardware. + (#) Wait indefinitely for the completion of submitted Command List by GPU2D hardware. + (#) Use HAL_GPU2D_IRQHandler() called under GPU2D_IRQHandler() interrupt subroutine. + (#) At the end of Command List execution HAL_GPU2D_IRQHandler() function is executed + and user can add his own function by customization of function pointer + (#) CommandListCpltCallback (member of GPU2D handle structure) to notify the upper level + about the completion of Command List execution. + + (#) Callback HAL_GPU2D_CommandListCpltCallback is invoked when the GPU2D hardware executes + the programmed command list (Command List execution completion). + + (++) This callback is called when the compilation defines USE_HAL_GPU2D_REGISTER_CALLBACKS + is set to 0 or not defined. + + (++) This callback should be implemented in the application side. It should notify + the upper level that the programmed command list is completed. + + (#) To control the GPU2D state, use the following function: HAL_GPU2D_GetState(). + + (#) To read the GPU2D error code, use the following function: HAL_GPU2D_GetError(). + + *** GPU2D HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in GPU2D HAL driver : + + (+) __HAL_GPU2D_RESET_HANDLE_STATE: Reset GPU2D handle state. + (+) __HAL_GPU2D_GET_FLAG: Get the GPU2D pending flags. + (+) __HAL_GPU2D_CLEAR_FLAG: Clear the GPU2D pending flags. + (+) __HAL_GPU2D_GET_IT_SOURCE: Check whether the specified GPU2D interrupt is enabled or not. + + *** Callback registration *** + =================================== + [..] + (#) The compilation define USE_HAL_GPU2D_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function @ref HAL_GPU2D_RegisterCallback() to register a user callback. + + (#) Function @ref HAL_GPU2D_RegisterCallback() allows to register following callbacks: + (+) CommandListCpltCallback : callback for Command List completion. + (+) MspInitCallback : GPU2D MspInit. + (+) MspDeInitCallback : GPU2D MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (#) Use function @ref HAL_GPU2D_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + @ref HAL_GPU2D_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) CommandListCpltCallback : callback for Command List completion. + (+) MspInitCallback : GPU2D MspInit. + (+) MspDeInitCallback : GPU2D MspDeInit. + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_GPU2D_RegisterCallback before calling @ref HAL_GPU2D_DeInit + or @ref HAL_GPU2D_Init function. + + When The compilation define USE_HAL_GPU2D_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + (@) You can refer to the GPU2D HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#ifdef HAL_GPU2D_MODULE_ENABLED +#if defined (GPU2D) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup GPU2D GPU2D + * @brief GPU2D HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup GPU2D_Private_Macros GPU2D Private Macros + * @{ + */ + +/** @defgroup GPU2D_Write_Read Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPU2D register + * @param __INSTANCE__ GPU2D Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define GPU2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(*(__IO uint32_t *)(__INSTANCE__\ + + __REG__), __VALUE__) + +/** + * @brief Read a value in GPU2D register + * @param __INSTANCE__ GPU2D Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define GPU2D_ReadReg(__INSTANCE__, __REG__) READ_REG(*(__IO uint32_t *)(__INSTANCE__ + __REG__)) +/** + * @} + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPU2D_Exported_Functions GPU2D Exported Functions + * @{ + */ + +/** @defgroup GPU2D_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the GPU2D + (+) De-initialize the GPU2D + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPU2D according to the specified + * parameters in the GPU2D_InitTypeDef and create the associated handle. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_GPU2D_Init(GPU2D_HandleTypeDef *hgpu2d) +{ + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_GPU2D_ALL_INSTANCE(hgpu2d->Instance)); + + if (hgpu2d->State == HAL_GPU2D_STATE_RESET) + { +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers in HAL_GPU2D_STATE_RESET only */ + hgpu2d->CommandListCpltCallback = HAL_GPU2D_CommandListCpltCallback; + if (hgpu2d->MspInitCallback == NULL) + { + hgpu2d->MspInitCallback = HAL_GPU2D_MspInit; + } + + /* Init the low level hardware */ + hgpu2d->MspInitCallback(hgpu2d); +#else /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 0 */ + /* Init the low level hardware */ + HAL_GPU2D_MspInit(hgpu2d); +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + + /* Allocate lock resource and initialize it */ + hgpu2d->Lock = HAL_UNLOCKED; + } + + /* Process locked */ + __HAL_LOCK(hgpu2d); + +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + /* Reset the CommandListCpltCallback handler */ + hgpu2d->CommandListCpltCallback = NULL; +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + + /* Update error code */ + hgpu2d->ErrorCode = HAL_GPU2D_ERROR_NONE; + + /* Initialize the GPU2D state*/ + hgpu2d->State = HAL_GPU2D_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hgpu2d); + + return HAL_OK; +} + +/** + * @brief Deinitializes the GPU2D peripheral registers to their default reset + * values. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +HAL_StatusTypeDef HAL_GPU2D_DeInit(GPU2D_HandleTypeDef *hgpu2d) +{ + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_GPU2D_ALL_INSTANCE(hgpu2d->Instance)); + + /* Process locked */ + __HAL_LOCK(hgpu2d); + + if (hgpu2d->State == HAL_GPU2D_STATE_READY) + { +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + if (hgpu2d->MspDeInitCallback == NULL) + { + hgpu2d->MspDeInitCallback = HAL_GPU2D_MspDeInit; + } + + /* DeInit the low level hardware */ + hgpu2d->MspDeInitCallback(hgpu2d); +#else /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 0 */ + /* Carry on with de-initialization of low level hardware */ + HAL_GPU2D_MspDeInit(hgpu2d); +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + } + +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + /* Reset the CommandListCpltCallback handler */ + hgpu2d->CommandListCpltCallback = NULL; +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + + /* Update error code */ + hgpu2d->ErrorCode = HAL_GPU2D_ERROR_NONE; + + /* Reset the GPU2D state*/ + hgpu2d->State = HAL_GPU2D_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hgpu2d); + + return HAL_OK; +} + +/** + * @brief Initializes the GPU2D MSP. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +__weak void HAL_GPU2D_MspInit(GPU2D_HandleTypeDef *hgpu2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgpu2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_GPU2D_MspInit can be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the GPU2D MSP. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +__weak void HAL_GPU2D_MspDeInit(GPU2D_HandleTypeDef *hgpu2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgpu2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_GPU2D_MspDeInit can be implemented in the user file. + */ +} + +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User GPU2D callback + * To be used instead of the weak (surcharged) predefined callback + * @param hgpu2d GPU2D handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_GPU2D_MSPINIT_CB_ID GPU2D MspInit callback ID + * @arg @ref HAL_GPU2D_MSPDEINIT_CB_ID GPU2D MspDeInit callback ID + * @param pCallback pointer to the callback function + * @note Weak predefined callback is defined for HAL_GPU2D_MSPINIT_CB_ID and HAL_GPU2D_MSPDEINIT_CB_ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_GPU2D_RegisterCallback(GPU2D_HandleTypeDef *hgpu2d, HAL_GPU2D_CallbackIDTypeDef CallbackID, + pGPU2D_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hgpu2d); + + /* Check the pCallback parameter is valid or not */ + if (pCallback == NULL) + { + /* Update the error code */ + hgpu2d->ErrorCode |= HAL_GPU2D_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + else + { + if ((hgpu2d->State == HAL_GPU2D_STATE_READY) + || (hgpu2d->State == HAL_GPU2D_STATE_RESET)) + { + switch (CallbackID) + { + case HAL_GPU2D_MSPINIT_CB_ID: + hgpu2d->MspInitCallback = pCallback; + break; + + case HAL_GPU2D_MSPDEINIT_CB_ID: + hgpu2d->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hgpu2d->ErrorCode |= HAL_GPU2D_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + } + + /* Release lock */ + __HAL_UNLOCK(hgpu2d); + + return status; +} + +/** + * @brief Unregister a GPU2D callback + * GPU2D Callback is redirected to the weak (surcharged) predefined callback + * @param hgpu2d GPU2D handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_GPU2D_MSPINIT_CB_ID GPU2D MspInit callback ID + * @arg @ref HAL_GPU2D_MSPDEINIT_CB_ID GPU2D MspDeInit callback ID + * @note Callback pointers will be set to legacy weak predefined callbacks for HAL_GPU2D_MSPINIT_CB_ID and + * HAL_GPU2D_MSPDEINIT_CB_ID + * @retval status + */ +HAL_StatusTypeDef HAL_GPU2D_UnRegisterCallback(GPU2D_HandleTypeDef *hgpu2d, HAL_GPU2D_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hgpu2d); + + if ((HAL_GPU2D_STATE_READY == hgpu2d->State) + || (HAL_GPU2D_STATE_RESET == hgpu2d->State)) + { + switch (CallbackID) + { + case HAL_GPU2D_MSPINIT_CB_ID: + hgpu2d->MspInitCallback = HAL_GPU2D_MspInit; /* Legacy weak Msp Init */ + break; + + case HAL_GPU2D_MSPDEINIT_CB_ID: + hgpu2d->MspDeInitCallback = HAL_GPU2D_MspDeInit; /* Legacy weak Msp DeInit */ + break; + + default : + /* Update the error code */ + hgpu2d->ErrorCode |= HAL_GPU2D_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release lock */ + __HAL_UNLOCK(hgpu2d); + + return status; +} + +/** + * @brief Register GPU2D Command List Complete Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hgpu2d GPU2D handle + * @param pCallback pointer to the Command List Complete Callback function + * @note Weak predefined callback is defined for Command List Complete + * @retval status + */ +HAL_StatusTypeDef HAL_GPU2D_RegisterCommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d, + pGPU2D_CommandListCpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hgpu2d); + + /* Check the CallbackID is valid or not */ + if (pCallback == NULL) + { + /* Update the error code */ + hgpu2d->ErrorCode |= HAL_GPU2D_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + else + { + if ((HAL_GPU2D_STATE_READY == hgpu2d->State) + || (HAL_GPU2D_STATE_RESET == hgpu2d->State)) + { + hgpu2d->CommandListCpltCallback = pCallback; + } + else + { + status = HAL_ERROR; + } + } + + /* Release lock */ + __HAL_UNLOCK(hgpu2d); + + return status; +} + +/** + * @brief Unregister a GPU2D Command List Complete Callback + * GPU2D Command List Complete Callback is redirected to the weak (surcharged) predefined callback + * @param hgpu2d GPU2D handle + * @note Callback pointer will be invalidate (NULL value) + * @retval status + */ +HAL_StatusTypeDef HAL_GPU2D_UnRegisterCommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the GPU2D handle validity */ + if (hgpu2d == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hgpu2d); + + if ((hgpu2d->State == HAL_GPU2D_STATE_READY) + || (hgpu2d->State == HAL_GPU2D_STATE_RESET)) + { + hgpu2d->CommandListCpltCallback = NULL; /* Invalidate the Callback pointer */ + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hgpu2d); + + return status; +} +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + +/** + * @} + */ + + +/** @defgroup GPU2D_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Read GPU2D Register value. + (+) Write a value to GPU2D Register. + (+) handle GPU2D interrupt request. + (+) Command List Complete Transfer Complete callback. + + +@endverbatim + * @{ + */ + +/** + * @brief Read GPU2D Register. Helper function for the higher-level library. + * @param hgpu2d Pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @param offset The register offset from GPU2D base address to read. + * @retval Register value + */ +uint32_t HAL_GPU2D_ReadRegister(const GPU2D_HandleTypeDef *hgpu2d, uint32_t offset) +{ + uint32_t value; + + /* Check the GPU2D handle validity */ + assert_param(hgpu2d != NULL); + + /* Check the parameters */ + assert_param(IS_GPU2D_ALL_INSTANCE(hgpu2d->Instance)); + assert_param(IS_GPU2D_OFFSET(offset)); + + /* No locking is required since reading a register is an atomic operation + * and doesn't incur a state change in hal_gpu2d. */ + value = GPU2D_ReadReg(hgpu2d->Instance, offset); + + return value; +} + +/** + * @brief Write a value to GPU2D Register. Helper function for the higher-level library. + * @param hgpu2d Pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @param offset The register offset from GPU2D base address to write. + * @param value The value to be written to provided register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_GPU2D_WriteRegister(GPU2D_HandleTypeDef *hgpu2d, uint32_t offset, uint32_t value) +{ + /* Check the GPU2D handle validity */ + assert_param(hgpu2d != NULL); + + /* Check the parameters */ + assert_param(IS_GPU2D_ALL_INSTANCE(hgpu2d->Instance)); + assert_param(IS_GPU2D_OFFSET(offset)); + + /* No locking is required since writing a register is an atomic operation + * and doesn't incur a state change in hal_gpu2d. */ + GPU2D_WriteReg(hgpu2d->Instance, offset, value); + + return HAL_OK; +} + +/** + * @brief Handle GPU2D interrupt request. + * @param hgpu2d Pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +void HAL_GPU2D_IRQHandler(GPU2D_HandleTypeDef *hgpu2d) +{ + uint32_t isr_flags = GPU2D_ReadReg(hgpu2d->Instance, GPU2D_ITCTRL); + + /* Command List Complete Interrupt management */ + if ((isr_flags & GPU2D_FLAG_CLC) != 0U) + { + uint32_t last_cl_id; + + /* Clear the completion flag */ + __HAL_GPU2D_CLEAR_FLAG(hgpu2d, GPU2D_FLAG_CLC); + + last_cl_id = GPU2D_ReadReg(hgpu2d->Instance, GPU2D_CLID); + + /* Command List Complete Callback */ +#if (USE_HAL_GPU2D_REGISTER_CALLBACKS == 1) + if (hgpu2d->CommandListCpltCallback != NULL) + { + hgpu2d->CommandListCpltCallback(hgpu2d, last_cl_id); + } +#else /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 0 */ + HAL_GPU2D_CommandListCpltCallback(hgpu2d, last_cl_id); +#endif /* USE_HAL_GPU2D_REGISTER_CALLBACKS = 1 */ + } +} + +/** + * @brief Handle GPU2D Error interrupt request. + * @param hgpu2d Pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +void HAL_GPU2D_ER_IRQHandler(GPU2D_HandleTypeDef *hgpu2d) +{ + HAL_GPU2D_ErrorCallback(hgpu2d); +} + +/** + * @brief Command List Complete callback. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @param CmdListID Command list ID that got completed. + * @retval None + */ +__weak void HAL_GPU2D_CommandListCpltCallback(GPU2D_HandleTypeDef *hgpu2d, uint32_t CmdListID) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgpu2d); + UNUSED(CmdListID); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_GPU2D_CommandListCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Error handler callback. + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval None + */ +__weak void HAL_GPU2D_ErrorCallback(GPU2D_HandleTypeDef *hgpu2d) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hgpu2d); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_GPU2D_ErrorCallback can be implemented in the user file. + The default implementation stops the execution as an error is considered + fatal and non recoverable. + */ + + /* Infinite loop */ + for (;;) {}; +} + +/** + * @} + */ + + +/** @defgroup GPU2D_Exported_Functions_Group3 Peripheral State and Error functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to: + (+) Get the GPU2D state + (+) Get the GPU2D error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the GPU2D state + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for the GPU2D. + * @retval GPU2D state + */ +HAL_GPU2D_StateTypeDef HAL_GPU2D_GetState(GPU2D_HandleTypeDef const *const hgpu2d) +{ + return hgpu2d->State; +} + +/** + * @brief Return the GPU2D error code + * @param hgpu2d pointer to a GPU2D_HandleTypeDef structure that contains + * the configuration information for GPU2D. + * @retval GPU2D Error Code + */ +uint32_t HAL_GPU2D_GetError(GPU2D_HandleTypeDef const *const hgpu2d) +{ + return hgpu2d->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* GPU2D */ +#endif /* HAL_GPU2D_MODULE_ENABLED */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hash.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hash.c new file mode 100644 index 000000000..a3767e5c1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hash.c @@ -0,0 +1,3170 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_hash.c + * @author MCD Application Team + * @brief HASH HAL module driver. + * This file provides firmware functions to manage HASH peripheral + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The HASH HAL driver can be used as follows: + + (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit(): + (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE() + (##) When resorting to interrupt-based APIs (e.g. HAL_HASH_Start_IT()) + (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority() + (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ() + (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler() API + (##) When resorting to DMA-based APIs (e.g. HAL_HASH_Start_DMA()) + (+++) Enable the DMA interface clock + (+++) Configure and enable one DMA to manage data transfer from + memory to peripheral (input DMA). Managing data transfer from + peripheral to memory can be performed only using CPU. + (+++) Associate the initialized DMA handle to the HASH DMA handle + using __HAL_LINKDMA() + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA: use + HAL_NVIC_SetPriority() and + HAL_NVIC_EnableIRQ() + + (#)Initialize the HASH HAL using HAL_HASH_Init(). This function: + (##) resorts to HAL_HASH_MspInit() for low-level initialization, + (##) configures the data type: no swap, half word swap, bit swap or byte swap, + (##) configures the Algorithm : MD5, SHA1 or SHA2 + + (#)Three processing schemes are available: + (##) Polling mode: processing APIs are blocking functions + i.e. they process the data and wait till the digest computation is finished, + e.g. HAL_HASH_Start() for HASH or HAL_HMAC_Start() for HMAC + (##) Interrupt mode: processing APIs are not blocking functions + i.e. they process the data under interrupt, + e.g. HAL_HASH_Start_IT() for HASH or HAL_HMAC_Start_IT() for HMAC + (##) DMA mode: processing APIs are not blocking functions and the CPU is + not used for data transfer i.e. the data transfer is ensured by DMA, + e.g. HAL_HASH_Start_DMA() for HASH or HAL_HMAC_Start_DMA() for HMAC. + + (#)When the processing function is called after HAL_HASH_Init(), the HASH peripheral is + initialized and processes the buffer fed in input. When the input data have all been + fed to the Peripheral, the digest computation can start. + + (#)Multi-buffer processing HASH and HMAC are possible in polling, interrupt and DMA modes. + (##) In polling mode, API HAL_HASH_Accumulate()/HAL_HASH_HMAC_Accumulate() must be called + for each input buffer, except for the last one. + User must resort to HAL_HASH_AccumulateLast()/HAL_HASH_HMAC_AccumulateLast() + to enter the last one and retrieve as well the computed digest. + + (##) In interrupt mode, API HAL_HASH_Accumulate_IT()/HAL_HASH_HMAC_Accumulate_IT() must + be called for each input buffer, except for the last one. + User must resort to HAL_HASH_AccumulateLast_IT()/HAL_HASH_HMAC_AccumulateLast_IT() + to enter the last one and retrieve as well the computed digest. + + (##) In DMA mode, once initialization is done, MDMAT bit must be set through + __HAL_HASH_SET_MDMAT() macro. + From that point, each buffer can be fed to the Peripheral through HAL_HASH_Start_DMA() API + for HASH and HAL_HASH_HMAC_Start_DMA() API for HMAC . + Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() + macro then wrap-up the HASH processing in feeding the last input buffer through the + same API HAL_HASH_Start_DMA()for HASH and HAL_HASH_HMAC_Start_DMA() API for HMAC and + retrieve as well the computed digest. + + (#)To use this driver (version 2.0.0) with application developed with old driver (version 1.0.0) user have to: + (##) Add Algorithm as parameter like DataType or KeySize. + (##) Use new API HAL_HASH_Start() for HASH and HAL_HASH_HMAC_Start() for HMAC processing instead of old API + like HAL_HASH_SHA1_Start and HAL_HMAC_SHA1_Start. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (HASH) + +/** @defgroup HASH HASH + * @brief HASH HAL module driver. + * @{ + */ + +#ifdef HAL_HASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup HASH_Private_Defines HASH Private Defines + * @{ + */ +#define HASH_TIMEOUTVALUE 1000U /*!< Time-out value */ +#define BLOCK_64B 64U /*!< block Size equal to 64 bytes */ +#define BLOCK_128B 128U /*!< block Size equal to 128 bytes */ +/** + * @} + */ + +/** @defgroup HASH_Number_Of_CSR_Registers HASH Number of Context Swap Registers + * @{ + */ +#define HASH_NUMBER_OF_CSR_REGISTERS 103U /*!< Number of Context Swap Registers */ +/** + * @} + */ + +/* Private Constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup HASH_Private_Functions HASH Private Functions + * @{ + */ +static void HASH_GetDigest(const HASH_HandleTypeDef *hhash, const uint8_t *pMsgDigest, uint8_t Size); +static void HASH_WriteData(HASH_HandleTypeDef *hhash, const uint8_t *pInBuffer, uint32_t Size); +static HAL_StatusTypeDef HASH_WriteData_IT(HASH_HandleTypeDef *hhash); +static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma); +static void HASH_DMAError(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status, + uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup HASH_Exported_Functions HASH Exported Functions + * @{ + */ + +/** @defgroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the HASH according to the specified parameters + in the HASH_InitTypeDef and create the associated handle + (+) DeInitialize the HASH peripheral + (+) Initialize the HASH MCU Specific Package (MSP) + (+) DeInitialize the HASH MSP + (+) Configure HASH (HAL_HASH_SetConfig) with the specified parameters in the HASH_ConfigTypeDef + Parameters which are configured in This section are : + (+) Data Type : no swap, half word swap, bit swap or byte swap + (+) Algorithm : MD5,SHA1 or SHA2 + (+) Get HASH configuration (HAL_HASH_GetConfig) from the specified parameters in the HASH_HandleTypeDef + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the HASH according to the specified parameters in the + HASH_HandleTypeDef and create the associated handle. + * @note Only Algorithm and DATATYPE bits of HASH Peripheral are set by HAL_HASH_Init(), + * other configuration bits are set by HASH or HMAC processing APIs. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash) +{ + uint32_t cr_value; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_HASH_DATATYPE(hhash->Init.DataType)); + assert_param(IS_HASH_ALGORITHM(hhash->Init.Algorithm)); + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + if (hhash->State == HAL_HASH_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hhash->Lock = HAL_UNLOCKED; + + /* Reset Callback pointers in HAL_HASH_STATE_RESET only */ + hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak InCpltCallback */ + hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak DgstCpltCallback */ + hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak ErrorCallback */ + if (hhash->MspInitCallback == NULL) + { + hhash->MspInitCallback = HAL_HASH_MspInit; + } + + /* Init the low level hardware */ + hhash->MspInitCallback(hhash); + } +#else + if (hhash->State == HAL_HASH_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hhash->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_HASH_MspInit(hhash); + } +#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ + + /* Set the key size, data type and Algorithm */ + cr_value = (uint32_t)(hhash->Init.DataType | hhash->Init.Algorithm); + /* Set the key size, data type, algorithm and mode */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_DATATYPE | HASH_CR_ALGO | HASH_CR_INIT, cr_value); + + /* Change HASH phase to Ready */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Change HASH state to Ready */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset error code field */ + hhash->ErrorCode = HAL_HASH_ERROR_NONE; + +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + /* Reset suspension request flag */ + hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; +#endif /* (USE_HAL_HASH_SUSPEND_RESUME) */ + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the HASH peripheral. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash) +{ + /* Check the HASH handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Change the default HASH phase */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Reset HashInCount */ + hhash->HashInCount = 0U; + + /* Reset multi buffers accumulation flag */ + hhash->Accumulation = 0U; + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + if (hhash->MspDeInitCallback == NULL) + { + hhash->MspDeInitCallback = HAL_HASH_MspDeInit; + } + + /* DeInit the low level hardware */ + hhash->MspDeInitCallback(hhash); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_HASH_MspDeInit(hhash); +#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */ + + /* Set the HASH state to Ready */ + hhash->State = HAL_HASH_STATE_RESET; + + __HAL_UNLOCK(hhash); + + return HAL_OK; +} + +/** + * @brief Configure the HASH according to the specified + * parameters in the HASH_ConfigTypeDef + * @param hhash pointer to a HASH_HandleTypeDef structure + * @param pConf pointer to a HASH_ConfigTypeDef structure that contains + * the configuration information for HASH module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_SetConfig(HASH_HandleTypeDef *hhash, HASH_ConfigTypeDef *pConf) +{ + uint32_t cr_value; + + /* Check the HASH handle allocation */ + if ((hhash == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_HASH_DATATYPE(pConf->DataType)); + assert_param(IS_HASH_ALGORITHM(pConf->Algorithm)); + + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + __HAL_LOCK(hhash); + + /* Set HASH parameters */ + hhash->Init.DataType = pConf->DataType; + hhash->Init.pKey = pConf->pKey; + hhash->Init.Algorithm = pConf->Algorithm; + hhash->Init.KeySize = pConf->KeySize; + + /* Set the key size, data type and Algorithm */ + cr_value = (uint32_t)(hhash->Init.DataType | hhash->Init.Algorithm); + /* Set the key size, data type, algorithm and mode */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_DATATYPE | HASH_CR_ALGO | HASH_CR_INIT, cr_value); + + /* Change HASH phase to Ready */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Change HASH state to Ready */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset error code field */ + hhash->ErrorCode = HAL_HASH_ERROR_NONE; + + __HAL_UNLOCK(hhash); + + return HAL_OK; + + } + else + { + /* Busy error code field */ + hhash->ErrorCode |= HAL_HASH_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Get HASH Configuration parameters in associated handle + * @param pConf pointer to a HASH_HandleTypeDef structure + * @param hhash pointer to a HASH_ConfigTypeDef structure that contains + * the configuration information for HASH module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_GetConfig(HASH_HandleTypeDef *hhash, HASH_ConfigTypeDef *pConf) +{ + + /* Check the HASH handle allocation */ + if ((hhash == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + __HAL_LOCK(hhash); + + /* Set HASH parameters */ + pConf->DataType = hhash->Init.DataType; + pConf->pKey = hhash->Init.pKey; + pConf->Algorithm = hhash->Init.Algorithm; + pConf->KeySize = hhash->Init.KeySize; + + /* Change HASH state to Ready */ + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + + return HAL_OK; + + } + else + { + /* Busy error code field */ + hhash->ErrorCode |= HAL_HASH_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Initialize the HASH MSP. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval None + */ +__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* NOTE : This function should not be modified; when the callback is needed, + HAL_HASH_MspInit() can be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the HASH MSP. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval None + */ +__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* NOTE : This function should not be modified; when the callback is needed, + HAL_HASH_MspDeInit() can be implemented in the user file. + */ +} + + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User HASH Callback + * To be used instead of the weak (overridden) predefined callback + * @param hhash HASH handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg HAL_HASH_INPUTCPLT_CB_ID input completion callback ID + * @arg HAL_HASH_DGSTCPLT_CB_ID digest computation completion callback ID + * @arg HAL_HASH_ERROR_CB_ID error callback ID + * @arg HAL_HASH_MSPINIT_CB_ID MspInit callback ID + * @arg HAL_HASH_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID, + pHASH_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hhash->State == HAL_HASH_STATE_READY) + { + switch (CallbackID) + { + case HAL_HASH_INPUTCPLT_CB_ID : + hhash->InCpltCallback = pCallback; + break; + + case HAL_HASH_DGSTCPLT_CB_ID : + hhash->DgstCpltCallback = pCallback; + break; + + case HAL_HASH_ERROR_CB_ID : + hhash->ErrorCallback = pCallback; + break; + + case HAL_HASH_MSPINIT_CB_ID : + hhash->MspInitCallback = pCallback; + break; + + case HAL_HASH_MSPDEINIT_CB_ID : + hhash->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hhash->State == HAL_HASH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HASH_MSPINIT_CB_ID : + hhash->MspInitCallback = pCallback; + break; + + case HAL_HASH_MSPDEINIT_CB_ID : + hhash->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a HASH Callback + * HASH Callback is redirected to the weak (overridden) predefined callback + * @param hhash HASH handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg HAL_HASH_INPUTCPLT_CB_ID HASH input completion Callback ID + * @arg HAL_HASH_DGSTCPLT_CB_ID HASH digest computation completion Callback ID + * @arg HAL_HASH_ERROR_CB_ID HASH error Callback ID + * @arg HAL_HASH_MSPINIT_CB_ID HASH MspInit callback ID + * @arg HAL_HASH_MSPDEINIT_CB_ID HASH MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + + if (hhash->State == HAL_HASH_STATE_READY) + { + switch (CallbackID) + { + case HAL_HASH_INPUTCPLT_CB_ID : + hhash->InCpltCallback = HAL_HASH_InCpltCallback; /* Legacy weak input completion callback */ + break; + + case HAL_HASH_DGSTCPLT_CB_ID : + hhash->DgstCpltCallback = HAL_HASH_DgstCpltCallback; /* Legacy weak digest computation + completion callback */ + break; + + case HAL_HASH_ERROR_CB_ID : + hhash->ErrorCallback = HAL_HASH_ErrorCallback; /* Legacy weak error callback */ + break; + + case HAL_HASH_MSPINIT_CB_ID : + hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_HASH_MSPDEINIT_CB_ID : + hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hhash->State == HAL_HASH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HASH_MSPINIT_CB_ID : + hhash->MspInitCallback = HAL_HASH_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_HASH_MSPDEINIT_CB_ID : + hhash->MspDeInitCallback = HAL_HASH_MspDeInit; /* Legacy weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhash->ErrorCode |= HAL_HASH_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) +/** + * @brief Save the HASH context in case of processing suspension. + * @param hhash HASH handle. + * @param pMemBuffer pointer to the memory buffer where the HASH context + * is saved. + * @note The IMR, STR, CR then all the CSR registers are saved + * in that order. Only the r/w bits are read to be restored later on. + * @note By default, all the context swap registers (there are + * HASH_NUMBER_OF_CSR_REGISTERS of those) are saved. + * @note pMemBuffer points to a buffer allocated by the user. The buffer size + * must be at least (HASH_NUMBER_OF_CSR_REGISTERS + 3) * 4 uint8 long. + * @retval None + */ +void HAL_HASH_Suspend(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer) +{ + uint32_t mem_ptr = (uint32_t)pMemBuffer; + uint32_t csr_ptr = (uint32_t)(hhash->Instance->CSR); + uint32_t i; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* Save IMR register content */ + *(uint32_t *)(mem_ptr) = READ_BIT(hhash->Instance->IMR, HASH_IT_DINI | HASH_IT_DCI); + mem_ptr += 4U; + /* Save STR register content */ + *(uint32_t *)(mem_ptr) = READ_BIT(hhash->Instance->STR, HASH_STR_NBLW); + mem_ptr += 4U; + /* Save CR register content */ + *(uint32_t *)(mem_ptr) = READ_BIT(hhash->Instance->CR, HASH_CR_DMAE | HASH_CR_DATATYPE | HASH_CR_MODE | HASH_CR_ALGO | + HASH_CR_LKEY | HASH_CR_MDMAT); + + mem_ptr += 4U; + /* By default, save all CSRs registers */ + for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--) + { + *(uint32_t *)(mem_ptr) = *(uint32_t *)(csr_ptr); + mem_ptr += 4U; + csr_ptr += 4U; + } + /* Save low-priority block HASH handle parameters */ + hhash->Init_saved = hhash->Init; + hhash->pHashOutBuffPtr_saved = hhash->pHashOutBuffPtr; + hhash->HashInCount_saved = hhash->HashInCount; + hhash->Size_saved = hhash->Size; + hhash->pHashInBuffPtr_saved = hhash->pHashInBuffPtr; + hhash->Phase_saved = hhash->Phase; + hhash->pHashKeyBuffPtr_saved = hhash->pHashKeyBuffPtr; +} + + +/** + * @brief Restore the HASH context in case of processing resumption. + * @param hhash HASH handle. + * @param pMemBuffer pointer to the memory buffer where the HASH context + * is stored. + * @note The IMR, STR, CR then all the CSR registers are restored + * in that order. Only the r/w bits are restored. + * @note By default, all the context swap registers (HASH_NUMBER_OF_CSR_REGISTERS + * of those) are restored (all of them have been saved by default + * beforehand). + * @retval None + */ +void HAL_HASH_Resume(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer) +{ + uint32_t mem_ptr = (uint32_t)pMemBuffer; + uint32_t csr_ptr = (uint32_t)(hhash->Instance->CSR); + uint32_t i; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* Restore IMR register content */ + WRITE_REG(hhash->Instance->IMR, (*(uint32_t *)(mem_ptr))); + mem_ptr += 4U; + /* Restore STR register content */ + WRITE_REG(hhash->Instance->STR, (*(uint32_t *)(mem_ptr))); + mem_ptr += 4U; + /* Restore CR register content */ + WRITE_REG(hhash->Instance->CR, (*(uint32_t *)(mem_ptr))); + mem_ptr += 4U; + + /* Reset the HASH processor before restoring the Context + Swap Registers (CSR) */ + SET_BIT(hhash->Instance->CR, HASH_CR_INIT); + + + /* By default, restore all CSR registers */ + for (i = HASH_NUMBER_OF_CSR_REGISTERS; i > 0U; i--) + { + WRITE_REG((*(uint32_t *)(csr_ptr)), (*(uint32_t *)(mem_ptr))); + mem_ptr += 4U; + csr_ptr += 4U; + } + + /* Restore low-priority block HASH handle parameters */ + hhash->Init = hhash->Init_saved; + hhash->pHashOutBuffPtr = hhash->pHashOutBuffPtr_saved; + hhash->HashInCount = hhash->HashInCount_saved; + hhash->Size = hhash->Size_saved; + hhash->pHashInBuffPtr = hhash->pHashInBuffPtr_saved; + hhash->Phase = hhash->Phase_saved; + hhash->State = HAL_HASH_STATE_SUSPENDED; + hhash->pHashKeyBuffPtr = hhash->pHashKeyBuffPtr_saved; +} + +/** + * @brief Initiate HASH processing suspension when in interruption mode. + * @param hhash HASH handle. + * @note Set the handle field SuspendRequest to the appropriate value so that + * the on-going HASH processing is suspended as soon as the required + * conditions are met. Note that the actual suspension is carried out + * by the functions HASH_WriteData() in polling mode and HASH_IT() in + * interruption mode. + * @retval None + */ +HAL_StatusTypeDef HAL_HASH_ProcessSuspend(HASH_HandleTypeDef *hhash) +{ + uint32_t remainingwords; /*remaining number in of source block to be transferred.*/ + uint32_t nbbytePartialHash = (((hhash->Instance->SR) >> 16U) * 4U); /* Nb byte to enter in HASH fifo + to trig a partial HASH computation*/ + uint32_t sizeinwords;/* number in word of source block to be transferred.*/ + + /* suspension in DMA mode*/ + if (__HAL_HASH_GET_FLAG(hhash, HASH_FLAG_DMAS) != RESET) + { + if (hhash->State == HAL_HASH_STATE_READY) + { + return HAL_ERROR; + } + else + { + + /* Clear the DMAE bit to disable the DMA interface */ + CLEAR_BIT(HASH->CR, HASH_CR_DMAE); + + /* Wait until the last DMA transfer is complete (DMAS = 0 in the HASH_SR register) */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DMAS, SET, HASH_TIMEOUTVALUE) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At this point, DMA interface is disabled and no transfer is on-going */ + /* Retrieve from the DMA handle how many words remain to be written */ + /* DMA3 used, DMA_CBR1_BNDT in bytes, DMA_CSR_FIFOL in words */ + remainingwords = ((((DMA_Channel_TypeDef *)hhash->hdmain->Instance)->CBR1) \ + & DMA_CBR1_BNDT) / 4U; + remainingwords += ((((DMA_Channel_TypeDef *)hhash->hdmain->Instance)->CSR) \ + & DMA_CSR_FIFOL) >> DMA_CSR_FIFOL_Pos; + + if (remainingwords <= nbbytePartialHash) + { + /* No suspension attempted since almost to the end of the transferred data. */ + /* Best option for user code is to wrap up low priority message hashing */ + return HAL_ERROR; + } + + /* Disable DMA channel */ + /* Note that the Abort function will + - Clear the transfer error flags + - Unlock + - Set the State + */ + if (HAL_DMA_Abort(hhash->hdmain) != HAL_OK) + { + return HAL_ERROR; + } + + if (__HAL_HASH_GET_FLAG(hhash, HASH_FLAG_DCIS) != RESET) + { + return HAL_ERROR; + } + + /* Wait until the hash processor is ready (no block is being processed), that is wait for DINIS=1 in HASH_SR */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DINIS, RESET, HASH_TIMEOUTVALUE) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Compute how many words were supposed to be transferred by DMA */ + sizeinwords = (((hhash->Size % 4U) != 0U) ? \ + ((hhash->Size + 3U) / 4U) : (hhash->Size / 4U)); + /* Accordingly, update the input pointer that points at the next word to be + transferred to the Peripheral by DMA */ + hhash->pHashInBuffPtr += 4U * (sizeinwords - remainingwords) ; + + /* And store in HashInCount the remaining size to transfer (in bytes) */ + hhash->HashInCount = 4U * remainingwords; + + + hhash->State = HAL_HASH_STATE_SUSPENDED; + __HAL_UNLOCK(hhash); + return HAL_OK; + } + + } + else /* suspension when in interruption mode*/ + { + /* Set Handle Suspend Request field */ + hhash->SuspendRequest = HAL_HASH_SUSPEND; + return HAL_OK; + } +} +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ +/** + * @} + */ + + +/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions + * @brief HASH processing functions using different mode. + * +@verbatim + =============================================================================== + ##### HASH processing functions ##### + =============================================================================== + [..] This section provides API allowing to calculate the hash value using + one of the HASH algorithms supported by the peripheral. + + [..] For a single buffer to be hashed, user can resort to one of three processing + functions available . + (+) Polling mode : HAL_HASH_Start() + (+) Interrupt mode : HAL_HASH_Start_IT() + (+) DMA mode : HAL_HASH_Start_DMA() + + [..] In case of multi-buffer HASH processing (a single digest is computed while + several buffers are fed to the Peripheral), the user can resort to successive calls + to : + (+) Polling mode : HAL_HASH_Accumulate() and wrap-up the digest computation by a call + to HAL_HASH_AccumulateLast() + (+) Interrupt mode : HAL_HASH_Accumulate_IT() and wrap-up the digest computation by a call + to HAL_HASH_AccumulateLast_IT() + (+) DMA mode : HAL_HASH_Start_DMA(), MDMAT bit must be set through __HAL_HASH_SET_MDMAT() macro, + before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() + macro then wrap-up the HASH processing in feeding the last input buffer through the + same API HAL_HASH_Start_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief HASH peripheral processes in polling mode pInBuffer then reads the computed digest. + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Start(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, uint32_t Timeout) +{ + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + + HASH_WriteData(hhash, pInBuffer, Size); + + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for digest calculation completion status(DCIS) flag to be set */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read the message digest */ + HASH_GetDigest(hhash, pOutBuffer, HASH_DIGEST_LENGTH(hhash)); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief HASH peripheral processes in interrupt mode pInBuffer then reads the computed digest. + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Start_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + HAL_HASH_StateTypeDef temp_state; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process or suspended */ + temp_state = hhash->State; + if ((temp_state == HAL_HASH_STATE_READY) || (temp_state == HAL_HASH_STATE_SUSPENDED)) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->HashInCount = 0U; + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->Size = Size; + + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + } + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + status = HASH_WriteData_IT(hhash); + } + else + { + status = HAL_BUSY; + } + /* Return function status */ + return status; +} + +/** + * @brief HASH peripheral processes in DMA mode pInBuffer then reads the computed digest. + * @note Multi-buffer HASH processing is possible, consecutive calls to HAL_HASH_Start_DMA + * (MDMAT bit must be set) can be used to feed several input buffers + * back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_Start_DMA (MDMAT bit must be reset). + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes (must be a multiple of 4 in + * case of Multi-buffer and not last buffer). + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Start_DMA(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + HAL_HASH_StateTypeDef temp_state; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process or suspended */ + temp_state = hhash->State; + if ((temp_state == HAL_HASH_STATE_READY) || (temp_state == HAL_HASH_STATE_SUSPENDED)) + { + + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Check if initialization phase has not been already performed */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->HashInCount = 0U; + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + + /* Check if initialization phase has already been performed. + If Phase is already set to HAL_HASH_PHASE_PROCESS, this means the + API is processing a new input data message in case of multi-buffer HASH + computation. */ + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + /* Configure the number of valid bits in last word of the message */ + if ((hhash->Instance->CR & HASH_CR_MDMAT) == 0U) + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Size) % 4U)); + } + else + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 0U); + } + + } + else /* HAL_HASH_STATE_SUSPENDED */ + { + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + /*only part not yet hashed to compute */ + hhash->Size = hhash->HashInCount; + } + /* Set the HASH DMA transfer complete callback */ + hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt; + /* Set the DMA error callback */ + hhash->hdmain->XferErrorCallback = HASH_DMAError; + + if ((hhash->hdmain->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hhash->hdmain->LinkedListQueue != NULL) && (hhash->hdmain->LinkedListQueue->Head != NULL)) + { + /* Enable the DMA channel */ + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET]\ + = ((((hhash->Size) % 4U) != 0U) ? ((hhash->Size) + (4U - ((hhash->Size) % 4U))) : (hhash->Size)); + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET]\ + = (uint32_t)(hhash->pHashInBuffPtr); /* Set DMA source address */ + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET]\ + = (uint32_t)&hhash->Instance->DIN; /* Set DMA destination address */ + + status = HAL_DMAEx_List_Start_IT(hhash->hdmain); + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hhash->hdmain, (uint32_t)pInBuffer, (uint32_t)&hhash->Instance->DIN, \ + ((((hhash->Size) % 4U) != 0U) ? ((hhash->Size) + (4U - ((hhash->Size) % 4U))) : \ + (hhash->Size))); + } + if (status != HAL_OK) + { + /* DMA error code field */ + hhash->ErrorCode |= HAL_HASH_ERROR_DMA; + + /* Return error */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hhash->ErrorCallback(hhash); +#else + /*Call legacy weak error callback*/ + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + else + { + /* Enable DMA requests */ + SET_BIT(hhash->Instance->CR, HASH_CR_DMAE); + } + } + else + { + status = HAL_BUSY; + + } + + /* Return function status */ + return status; +} + + +/** + * @brief HASH peripheral processes in polling mode several input buffers. + * @note Consecutive calls to HAL_HASH_Accumulate() can be used to feed + * several input buffers back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_AccumulateLast() + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes and a multiple of 4. + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Accumulate(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint32_t Timeout) +{ + HAL_HASH_StateTypeDef temp_state; + + /* Check the hash handle allocation and buffer length multiple of 4 */ + if ((hhash == NULL) || ((Size % 4U) != 0U)) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process or suspended */ + temp_state = hhash->State; + if ((temp_state == HAL_HASH_STATE_READY) || (temp_state == HAL_HASH_STATE_SUSPENDED)) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + HASH_WriteData(hhash, pInBuffer, Size); + + /* Wait for BUSY flag to be cleared */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief End computation of a single HASH signature after several calls to HAL_HASH_Accumulate() API. + * @note Digest is available in pOutBuffer + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_AccumulateLast(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, uint32_t Timeout) +{ + HAL_HASH_StateTypeDef temp_state; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process or suspended */ + temp_state = hhash->State; + if ((temp_state == HAL_HASH_STATE_READY) || (temp_state == HAL_HASH_STATE_SUSPENDED)) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + + + HASH_WriteData(hhash, pInBuffer, Size); + + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for digest calculation completion status(DCIS) flag to be set */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + /* Read the message digest */ + HASH_GetDigest(hhash, pOutBuffer, HASH_DIGEST_LENGTH(hhash)); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + hhash->Accumulation = 0; + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief HASH peripheral processes in interrupt mode several input buffers. + * @note Consecutive calls to HAL_HASH_Accumulate_IT() can be used to feed + * several input buffers back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_AccumulateLast_IT() + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes and a multiple of 4. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size) +{ + HAL_StatusTypeDef status; + + /* Check the hash handle allocation */ + if ((hhash == NULL) || ((Size % 4U) != 0U)) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size and pHashInBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + /* Set multi buffers accumulation flag */ + hhash->Accumulation = 1U; + + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI); + + status = HASH_WriteData_IT(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + } + else + { + status = HAL_BUSY; + } + /* Return function status */ + return status; +} + + +/** + * @brief End computation of a single HASH signature after several calls to HAL_HASH_Accumulate_IT() API. + * @note Digest is available in pOutBuffer + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_AccumulateLast_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->HashInCount = 0U; + hhash->Size = Size; + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Set HASH mode */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_MODE); + /* Reset the HASH processor core */ + MODIFY_REG(hhash->Instance->CR, HASH_CR_INIT, HASH_CR_INIT); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + status = HASH_WriteData_IT(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + } + else + { + status = HAL_BUSY; + } + /* Return function status */ + return status; +} + +/** + * @} + */ + + +/** @defgroup HASH_Exported_Functions_Group3 HMAC processing functions + * @brief HMAC processing functions using different mode. + * +@verbatim + =============================================================================== + ##### HMAC processing functions ##### + =============================================================================== + [..] This section provides API allowing to calculate the HMAC (keyed-hash + message authentication code) value using: + (+) one of the algorithms supported by the peripheral + (+) Key selection + (++) Long key : HMAC key is longer than the block size + (++) Short key : HMAC key is shorter or equal to the block size + + [..] To calculate the HMAC for a single buffer, user can resort to one of three processing + functions available . + (+) Polling mode : HAL_HASH_HMAC_Start() + (+) Interrupt mode : HAL_HASH_HMAC_Start_IT() + (+) DMA mode : HAL_HASH_HMAC_Start_DMA() + + [..] In case of multi-buffer HMAC processing (a single digest is computed while + several buffers are fed to the Peripheral), the user can resort to successive calls + to : + (+) Polling mode : HAL_HASH_HMAC_Accumulate() and wrap-up the digest computation by a call + to HAL_HASH_HMAC_AccumulateLast() + (+) Interrupt mode : HAL_HASH_HMAC_Accumulate_IT() and wrap-up the digest computation by a call + to HAL_HASH_HMAC_AccumulateLast_IT() + (+) DMA mode : HAL_HASH_HMAC_Start_DMA(),MDMAT bit must be set through __HAL_HASH_SET_MDMAT() macro, + before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT() + macro then wrap-up the HMAC processing in feeding the last input buffer through the + same API HAL_HASH_HMAC_Start_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief HMAC in polling mode, HASH peripheral processes Key then pInBuffer then reads the computed digest. + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Start(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, uint32_t Timeout) +{ + uint32_t blocksize; /* Block size in bytes */ + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HASH Phase */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Reset HashInCount and Initialize Size, pHashKeyBuffPtr, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->HashInCount = 0U; + hhash->Size = Size; + + /* Check if key size is larger than block size of the algorithm, accordingly set LKEY and the other setting bits */ + if ((hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA1) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA224) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA256)) + { + blocksize = BLOCK_64B; + } + else + { + blocksize = BLOCK_128B; + } + if (hhash->Init.KeySize > blocksize) + { + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_LONGKEY | HASH_CR_INIT); + } + else + { + + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_CR_INIT); + } + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for BUSY flag to be cleared */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + + /* Write message */ + HASH_WriteData(hhash, pInBuffer, Size); + + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for BUSY flag to be cleared */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for digest calculation completion status(DCIS) flag to be set */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read the message digest */ + HASH_GetDigest(hhash, pOutBuffer, HASH_DIGEST_LENGTH(hhash)); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Change the HASH phase */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + /* Return function status */ + return HAL_OK; + + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief HMAC accumulate mode, HASH peripheral processes Key then several input buffers. + * @note Consecutive calls to HAL_HASH_HMAC_Accumulate() can be used to feed + * several input buffers back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_HMAC_AccumulateLast() + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes and a multiple of 4 + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Accumulate(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint32_t Timeout) +{ + uint32_t blocksize; /* Block size in bytes */ + + /* Check the hash handle allocation and buffer length multiple of 4 */ + if ((hhash == NULL) || ((Size % 4U) != 0U)) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Initialize Size, pHashInBuffPtr and pHashKeyBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->Size = Size; + + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Reset HashInCount parameter */ + hhash->HashInCount = 0U; + /* Check if key size is larger than 64 bytes, accordingly set LKEY and the other setting bits */ + /* Check if key size is larger than block size of the algorithm, accordingly set LKEY and the other setting */ + if ((hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA1) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA224) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA256)) + { + blocksize = BLOCK_64B; + } + else + { + blocksize = BLOCK_128B; + } + if (hhash->Init.KeySize > blocksize) + { + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_LONGKEY | HASH_CR_INIT); + } + else + { + + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_CR_INIT); + } + /* Set phase process */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for BUSY flag to be cleared */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* Change the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 0U); + + /* Write message */ + HASH_WriteData(hhash, pInBuffer, Size); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + /* Return function status */ + return HAL_OK; + + } + else + { + return HAL_BUSY; + } +} +/** + * @brief End computation of a single HMAC signature after several calls to HAL_HASH_HMAC_Accumulate() API. + * @note Digest is available in pOutBuffer + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @param Timeout specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_AccumulateLast(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer, uint32_t Timeout) +{ + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Initialize Size, pHashInBuffPtr, pHashKeyBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->Size = Size; + + if (hhash->Phase != HAL_HASH_PHASE_PROCESS) + { + return HAL_ERROR; + } + else + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (Size % 4U)); + + /* Write message */ + HASH_WriteData(hhash, pInBuffer, Size); + + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for BUSY flag to be cleared */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_BUSY, SET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for digest calculation completion status(DCIS) flag to be set */ + if (HASH_WaitOnFlagUntilTimeout(hhash, HASH_FLAG_DCIS, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read the message digest */ + HASH_GetDigest(hhash, pOutBuffer, HASH_DIGEST_LENGTH(hhash)); + } + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief HMAC in interrupt mode, HASH peripheral process Key then pInBuffer then read the computed digest. + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Start_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + uint32_t blocksize; /* Block size in bytes */ + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HASH Phase */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Reset HashInCount and Initialize Size, pHashKeyBuffPtr, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->HashInCount = 0U; + hhash->Size = Size; + + /* Check if key size is larger than block size of the algorithm, accordingly set LKEY and the other setting bits */ + if ((hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA1) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA224) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA256)) + { + blocksize = BLOCK_64B; + } + else + { + blocksize = BLOCK_128B; + } + if (hhash->Init.KeySize > blocksize) + { + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_LONGKEY | HASH_CR_INIT); + } + else + { + + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_CR_INIT); + } + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + else if (hhash->State == HAL_HASH_STATE_SUSPENDED) + { + /* Process Locked */ + __HAL_LOCK(hhash); + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + } + else + { + return HAL_BUSY; + } + + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + status = HASH_WriteData_IT(hhash); + + /* Return function status */ + return status; +} + +/** + * @brief HMAC accumulate in interrupt mode, HASH peripheral processes Key then several input buffers. + * @note Consecutive calls to HAL_HASH_HMAC_Accumulate_IT() can be used to feed + * several input buffers back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_HMAC_AccumulateLast_IT() + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes and a multiple of 4. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Accumulate_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size) +{ + HAL_StatusTypeDef status; + uint32_t blocksize; /* Block size in bytes */ + + /* Check the hash handle allocation and buffer length multiple of 4 */ + if ((hhash == NULL) || ((Size % 4U) != 0U)) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process */ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->HashInCount = 0U; + hhash->Size = Size; + /* Set multi buffers accumulation flag */ + hhash->Accumulation = 1U; + + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Check if key size is larger than block size of the algorithm, accordingly set LKEY and the other setting */ + if ((hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA1) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA224) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA256)) + { + blocksize = BLOCK_64B; + } + else + { + blocksize = BLOCK_128B; + } + if (hhash->Init.KeySize > blocksize) + { + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_LONGKEY | HASH_CR_INIT); + } + else + { + + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_CR_INIT); + } + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_PROCESS; + } + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + status = HASH_WriteData_IT(hhash); + } + else + { + status = HAL_BUSY; + } + /* Return function status */ + return status; +} +/** + * @brief End computation of a single HMAC signature in interrupt mode, after + * several calls to HAL_HASH_HMAC_Accumulate() API. + * @note Digest is available in pOutBuffer + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_AccumulateLast_IT(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, + uint32_t Size, uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process*/ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->HashInCount = 0U; + hhash->Size = Size; + /* Set multi buffers accumulation flag */ + hhash->Accumulation = 0U; + /* Enable the specified HASH interrupt*/ + __HAL_HASH_ENABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + status = HASH_WriteData_IT(hhash); + } + else + { + status = HAL_BUSY; + } + /* Return function status */ + return status; +} + +/** + * @brief HMAC in DMA mode,HASH peripheral processes Key then pInBuffer in DMA mode + * then read the computed digest. + * @note Multi-buffer HMAC processing is possible, consecutive calls to HAL_HASH_HMAC_Start_DMA + * (MDMAT bit must be set) can be used to feed several input buffers + * back-to-back to the Peripheral that will yield a single + * HASH signature once all buffers have been entered. Wrap-up of input + * buffers feeding and retrieval of digest is done by a call to + * HAL_HASH_HMAC_Start_DMA (MDMAT bit must be reset). + * @param hhash HASH handle. + * @param pInBuffer pointer to the input buffer (buffer to be hashed). + * @param Size length of the input buffer in bytes. + * @param pOutBuffer pointer to the computed digest. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HASH_HMAC_Start_DMA(HASH_HandleTypeDef *hhash, const uint8_t *const pInBuffer, uint32_t Size, + uint8_t *const pOutBuffer) +{ + HAL_StatusTypeDef status; + uint32_t count; + uint32_t blocksize; /* Block size in bytes */ + + /* Check the hash handle allocation */ + if (hhash == NULL) + { + return HAL_ERROR; + } + + /* Check if peripheral is ready to start process*/ + if (hhash->State == HAL_HASH_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hhash); + + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /* Reset HashInCount and Initialize Size, pHashInBuffPtr and pHashOutBuffPtr parameters */ + hhash->pHashInBuffPtr = pInBuffer; + hhash->pHashOutBuffPtr = pOutBuffer; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + hhash->HashInCount = 0U; + hhash->Size = Size; + + /* Set the phase */ + if (hhash->Phase == HAL_HASH_PHASE_READY) + { + /* Check if key size is larger than block size of the algorithm, accordingly set LKEY and the other setting */ + if ((hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA1) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA224) || + (hhash->Init.Algorithm == HASH_ALGOSELECTION_SHA256)) + { + blocksize = BLOCK_64B; + } + else + { + blocksize = BLOCK_128B; + } + if (hhash->Init.KeySize > blocksize) + { + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_LONGKEY | HASH_CR_INIT); + } + else + { + + MODIFY_REG(hhash->Instance->CR, HASH_CR_LKEY | HASH_CR_MODE | HASH_CR_INIT, + HASH_ALGOMODE_HMAC | HASH_CR_INIT); + } + + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1; + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for DCIS flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_BUSY)); + } + + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; + if ((hhash->Instance->CR & HASH_CR_MDMAT) == 0U) + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Size) % 4U)); + } + else + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 0U); + } + } + else if (hhash->State == HAL_HASH_STATE_SUSPENDED) + { + /* Process Locked */ + __HAL_LOCK(hhash); + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_BUSY; + + /*only part not yet hashed to compute */ + hhash->Size = hhash->HashInCount; + } + + else + { + /* Return busy status */ + return HAL_BUSY; + } + + /* Set the HASH DMA transfer complete callback */ + hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt; + /* Set the DMA error callback */ + hhash->hdmain->XferErrorCallback = HASH_DMAError; + + if ((hhash->hdmain->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hhash->hdmain->LinkedListQueue != NULL) && (hhash->hdmain->LinkedListQueue->Head != NULL)) + { + /* Enable the DMA channel */ + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET]\ + = ((((hhash->Size) % 4U) != 0U) ? ((hhash->Size) + (4U - ((hhash->Size) % 4U))) : ((hhash->Size))); + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET]\ + = (uint32_t)(hhash->pHashInBuffPtr); /* Set DMA source address */ + hhash->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET]\ + = (uint32_t)&hhash->Instance->DIN; /* Set DMA destination address */ + + status = HAL_DMAEx_List_Start_IT(hhash->hdmain); + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hhash->hdmain, (uint32_t)(hhash->pHashInBuffPtr), (uint32_t)&hhash->Instance->DIN, \ + ((((hhash->Size) % 4U) != 0U) ? ((hhash->Size) + (4U - ((hhash->Size) % 4U))) : \ + ((hhash->Size)))); + } + if (status != HAL_OK) + { + /* DMA error code field */ + hhash->ErrorCode |= HAL_HASH_ERROR_DMA; + + /* Return error */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hhash->ErrorCallback(hhash); +#else + /*Call legacy weak error callback*/ + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + else + { + /* Enable DMA requests */ + SET_BIT(hhash->Instance->CR, HASH_CR_DMAE); + } + + /* Return function status */ + return status; +} + + +/** + * @} + */ + +/** @defgroup HASH_Exported_Functions_Group4 HASH IRQ handler management + * @brief HASH IRQ handler. + * +@verbatim + ============================================================================== + ##### HASH IRQ handler management ##### + ============================================================================== +[..] This section provides HASH IRQ handler and callback functions. + (+) HAL_HASH_IRQHandler HASH interrupt request + (+) HAL_HASH_InCpltCallback input data transfer complete callback + (+) HAL_HASH_DgstCpltCallback digest computation complete callback + (+) HAL_HASH_ErrorCallback HASH error callback + (+) HAL_HASH_GetState return the HASH state + (+) HAL_HASH_GetError return the HASH error code +@endverbatim + * @{ + */ + +/** + * @brief Handle HASH interrupt request. + * @param hhash HASH handle. + * @note HAL_HASH_IRQHandler() handles interrupts in HMAC processing as well. + * @retval None + */ +void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash) +{ + HAL_StatusTypeDef status; + uint32_t itsource = hhash->Instance->IMR; + uint32_t itflag = hhash->Instance->SR; + + /* If digest is ready */ + if ((itflag & HASH_FLAG_DCIS) == HASH_FLAG_DCIS) + { + /* Read the digest */ + HASH_GetDigest(hhash, hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH(hhash)); + + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_READY; + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + /* Call digest computation complete call back */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->DgstCpltCallback(hhash); +#else + HAL_HASH_DgstCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + + } + /* If Peripheral ready to accept new data */ + if ((itflag & HASH_FLAG_DINIS) == HASH_FLAG_DINIS) + { + if ((itsource & HASH_IT_DINI) == HASH_IT_DINI) + { + status = HASH_WriteData_IT(hhash); + if (status != HAL_OK) + { + /* Call error callback */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->ErrorCallback(hhash); +#else + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + } + } +} + +/** + * @brief Input data transfer complete call back. + * @note HAL_HASH_InCpltCallback() is called when the complete input message + * has been fed to the Peripheral. This API is invoked only when input data are + * entered under interruption or through DMA. + * @note In case of HASH or HMAC multi-buffer DMA feeding case (MDMAT bit set), + * HAL_HASH_InCpltCallback() is called at the end of each buffer feeding + * to the Peripheral. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval None + */ +__weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* NOTE : This function should not be modified; when the callback is needed, + HAL_HASH_InCpltCallback() can be implemented in the user file. + */ +} + +/** + * @brief Digest computation complete call back. + * @note HAL_HASH_DgstCpltCallback() is used under interruption, is not + * relevant with DMA. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval None + */ +__weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* NOTE : This function should not be modified; when the callback is needed, + HAL_HASH_DgstCpltCallback() can be implemented in the user file. + */ +} + +/** + * @brief HASH error callback. + * @note Code user can resort to hhash->Status (HAL_ERROR, HAL_TIMEOUT,...) + * to retrieve the error type. + * @param hhash pointer to a HASH_HandleTypeDef structure that contains + * the configuration information for HASH module. + * @retval None + */ +__weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhash); + + /* NOTE : This function should not be modified; when the callback is needed, + HAL_HASH_ErrorCallback() can be implemented in the user file. + */ +} + +/** + * @brief Return the HASH handle state. + * @note The API yields the current state of the handle (BUSY, READY,...). + * @param hhash HASH handle. + * @retval HAL HASH state + */ +HAL_HASH_StateTypeDef HAL_HASH_GetState(const HASH_HandleTypeDef *hhash) +{ + return hhash->State; +} + +/** + * @brief Return the HASH handle error code. + * @param hhash pointer to a HASH_HandleTypeDef structure. + * @retval HASH Error Code + */ +uint32_t HAL_HASH_GetError(const HASH_HandleTypeDef *hhash) +{ + /* Return HASH Error Code */ + return hhash->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup HASH_Private_Functions + * @{ + */ + +/** + * @brief DMA HASH Input Data transfer completion callback. + * @param hdma DMA handle. + * @retval None + */ +static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma) +{ + HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + uint32_t count; + + if (READ_BIT(hhash->Instance->CR, HASH_CR_MODE) == 0U) + { + if ((hhash->Instance->CR & HASH_CR_MDMAT) == 0U) + { + /* Disable the DMA transfer */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_DMAE); + + + /* Wait for DCIS flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->ErrorCallback(hhash); +#else + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DCIS)); + /* Call Input data transfer complete call back */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->InCpltCallback(hhash); +#else + HAL_HASH_InCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + + /* Read the message digest */ + HASH_GetDigest(hhash, hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH(hhash)); + + /* Change the HASH state to ready */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process UnLock */ + __HAL_UNLOCK(hhash); + + /* Call digest complete call back */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->DgstCpltCallback(hhash); +#else + HAL_HASH_DgstCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + else + { + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + } + } + else /*HMAC DMA*/ + { + if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) + { + if ((hhash->Instance->CR & HASH_CR_MDMAT) == 0U) + { + /* Set the phase */ + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + /* Write Key */ + HASH_WriteData(hhash, hhash->Init.pKey, hhash->Init.KeySize); + + /* Start the Key padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for DCIS flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable the DMA transfer */ + CLEAR_BIT(hhash->Instance->CR, HASH_CR_DMAE); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_DMA; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->ErrorCallback(hhash); +#else + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DCIS)); + + /* Read the message digest */ + HASH_GetDigest(hhash, hhash->pHashOutBuffPtr, HASH_DIGEST_LENGTH(hhash)); + + /* Change the HASH state to ready */ + hhash->State = HAL_HASH_STATE_READY; + + /* Reset HASH state machine */ + hhash->Phase = HAL_HASH_PHASE_READY; + + /* Process UnLock */ + __HAL_UNLOCK(hhash); + + /* Call digest complete call back */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->DgstCpltCallback(hhash); +#else + HAL_HASH_DgstCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + + } + else + { + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + hhash->Accumulation = 1; + } + } + } +} + +/** + * @brief DMA HASH communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void HASH_DMAError(DMA_HandleTypeDef *hdma) +{ + HASH_HandleTypeDef *hhash = (HASH_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hhash->ErrorCode |= HAL_HASH_ERROR_DMA; + /* Set HASH state to ready to prevent any blocking issue in user code + present in HAL_HASH_ErrorCallback() */ + hhash->State = HAL_HASH_STATE_READY; + +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1) + hhash->ErrorCallback(hhash); +#else + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ +} + +/** + * @brief Feed the input buffer to the HASH peripheral in polling. + * @param hhash HASH handle. + * @param pInBuffer pointer to input buffer. + * @param Size the size of input buffer in bytes. + * @retval HAL status + */ +static void HASH_WriteData(HASH_HandleTypeDef *hhash, const uint8_t *pInBuffer, uint32_t Size) +{ + uint32_t buffercounter; + __IO uint32_t inputaddr = (uint32_t) pInBuffer; + uint8_t tmp1; + uint8_t tmp2; + uint8_t tmp3; + + for (buffercounter = 0U; buffercounter < (Size / 4U) ; buffercounter++) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)inputaddr; + inputaddr += 4U; + hhash->HashInCount += 4U; + } + + if ((Size % 4U) != 0U) + { + if (hhash->Init.DataType == HASH_HALFWORD_SWAP) + { + /* Write remaining input data */ + if ((Size % 4U) <= 2U) + { + hhash->Instance->DIN = (uint32_t) * (uint16_t *)inputaddr; + } + if ((Size % 4U) == 3U) + { + hhash->Instance->DIN = *(uint32_t *)inputaddr; + } + } + else if ((hhash->Init.DataType == HASH_BYTE_SWAP) + || (hhash->Init.DataType == HASH_BIT_SWAP)) /* byte swap or bit swap or */ + { + /* Write remaining input data */ + if ((Size % 4U) == 1U) + { + hhash->Instance->DIN = (uint32_t) * (uint8_t *)inputaddr; + } + if ((Size % 4U) == 2U) + { + hhash->Instance->DIN = (uint32_t) * (uint16_t *)inputaddr; + } + if ((Size % 4U) == 3U) + { + tmp1 = *(uint8_t *)inputaddr; + tmp2 = *(((uint8_t *)inputaddr) + 1U); + tmp3 = *(((uint8_t *)inputaddr) + 2U); + hhash->Instance->DIN = ((uint32_t)tmp1) | ((uint32_t)tmp2 << 8U) | ((uint32_t)tmp3 << 16U); + } + } + else + { + hhash->Instance->DIN = *(uint32_t *)inputaddr; + } + hhash->HashInCount += 4U; + } +} + +/** + * @brief Feed the input buffer to the HASH peripheral in interruption mode. + * @param hhash HASH handle. + * @retval HAL status + */ +static HAL_StatusTypeDef HASH_WriteData_IT(HASH_HandleTypeDef *hhash) +{ + uint32_t buffercounter; + uint32_t count; + __IO uint32_t keyaddr = (uint32_t)(hhash->pHashKeyBuffPtr); + __IO uint32_t inputaddr = (uint32_t)(hhash->pHashInBuffPtr); + uint32_t nbbytePartialHash = (((hhash->Instance->SR) >> 16U) * 4U); /* Nb byte to enter in HASH fifo to trig + a partial HASH computation*/ + + if (hhash->State == HAL_HASH_STATE_BUSY) + { + if ((hhash->Instance->CR & HASH_CR_MODE) == 0U) + { +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing */ + if (hhash->SuspendRequest == HAL_HASH_SUSPEND) + { + /* reset SuspendRequest */ + hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_SUSPENDED; + __HAL_UNLOCK(hhash); + } + else + { +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + + if (((hhash->HashInCount) + nbbytePartialHash) < (hhash->Size)) + { + for (buffercounter = 0U; buffercounter < nbbytePartialHash ; buffercounter += 4U) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)inputaddr; + inputaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashInBuffPtr += 4U; + } + /* Wait for HASH_IT_DINI flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DINIS)); + } + else + { + while ((hhash->HashInCount) < hhash->Size) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)inputaddr; + inputaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashInBuffPtr += 4U; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hhash->InCpltCallback(hhash); +#else + /*Call legacy weak Input complete callback*/ + HAL_HASH_InCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + if (hhash->Accumulation == 0U) + { + if (__HAL_HASH_GET_IT_SOURCE(hhash, HASH_IT_DINI)) + { + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for HASH_FLAG_DCIS flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DCIS)); + } + } + else + { + /* Reset multi buffers accumulation flag */ + hhash->Accumulation = 0U; + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI); + } + } +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + } +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + } + else /*HMAC */ + { + if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_2) /* loading input*/ + { +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing */ + if (hhash->SuspendRequest == HAL_HASH_SUSPEND) + { + /* reset SuspendRequest */ + hhash->SuspendRequest = HAL_HASH_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + /* Change the HASH state */ + hhash->State = HAL_HASH_STATE_SUSPENDED; + __HAL_UNLOCK(hhash); + } + else + { +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + if (hhash->Accumulation == 1U) + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 0U); + } + else + { + /* Configure the number of valid bits in last word of the message */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * (hhash->Size % 4U)); + } + if (((hhash->HashInCount) + nbbytePartialHash) < (hhash->Size)) + { + for (buffercounter = 0U; buffercounter < nbbytePartialHash ; buffercounter += 4U) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)inputaddr; + inputaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashInBuffPtr += 4U; + } + /* Wait for HASH_IT_DINI flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DINIS)); + } + else + { + while ((hhash->HashInCount) < hhash->Size) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)inputaddr; + inputaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashInBuffPtr += 4U; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hhash->InCpltCallback(hhash); +#else + /*Call legacy weak Input complete callback*/ + HAL_HASH_InCpltCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + + if (hhash->Accumulation == 0U) + { + if (__HAL_HASH_GET_IT_SOURCE(hhash, HASH_IT_DINI)) + { + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for HASH_FLAG_BUSY flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_SET(hhash->Instance->SR, HASH_FLAG_BUSY)); + + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_3; + hhash->HashInCount = 0U; + hhash->pHashKeyBuffPtr = hhash->Init.pKey; + } + } + + else + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_OK; + } + } +#if (USE_HAL_HASH_SUSPEND_RESUME == 1U) + } +#endif /* USE_HAL_HASH_SUSPEND_RESUME */ + } + + else if (hhash->Phase == HAL_HASH_PHASE_HMAC_STEP_3)/* loading Key*/ + { + + /* Configure the number of valid bits in last word of the Key */ + MODIFY_REG(hhash->Instance->STR, HASH_STR_NBLW, 8U * ((hhash->Init.KeySize) % 4U)); + + if (((hhash->HashInCount) + nbbytePartialHash) < (hhash->Init.KeySize)) + { + for (buffercounter = 0U; buffercounter < nbbytePartialHash ; buffercounter += 4U) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)keyaddr; + keyaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashKeyBuffPtr += 4U; + } + /* Wait for HASH_IT_DINI flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DINIS)); + } + else + { + while ((hhash->HashInCount) < (hhash->Init.KeySize)) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)keyaddr; + keyaddr += 4U; + hhash->HashInCount += 4U; + } + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for HASH_FLAG_DCIS flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DCIS)); + } + } + else /*first step , loading key*/ + { + + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_1; + + if (((hhash->HashInCount) + nbbytePartialHash) < (hhash->Init.KeySize)) + { + for (buffercounter = 0U; buffercounter < nbbytePartialHash ; buffercounter += 4U) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)keyaddr; + keyaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashKeyBuffPtr += 4U; + } + /* Wait for HASH_IT_DINI flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hhash->Instance->SR, HASH_FLAG_DINIS)); + } + else + { + while ((hhash->HashInCount) < (hhash->Init.KeySize)) + { + /* Write input data 4 bytes at a time */ + hhash->Instance->DIN = *(uint32_t *)keyaddr; + keyaddr += 4U; + hhash->HashInCount += 4U; + hhash->pHashKeyBuffPtr += 4U; + } + /* Start the message padding then the Digest calculation */ + SET_BIT(hhash->Instance->STR, HASH_STR_DCAL); + + /* Wait for HASH_FLAG_BUSY flag to be set */ + count = HASH_TIMEOUTVALUE; + do + { + count--; + if (count == 0U) + { + /* Disable Interrupts */ + __HAL_HASH_DISABLE_IT(hhash, HASH_IT_DINI | HASH_IT_DCI); + + /* Change state */ + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + hhash->State = HAL_HASH_STATE_READY; + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } while (HAL_IS_BIT_SET(hhash->Instance->SR, HASH_FLAG_BUSY)); + /*change Phase to step 2*/ + hhash->Phase = HAL_HASH_PHASE_HMAC_STEP_2; + hhash->HashInCount = 0U; + } + } + } + } + else if ((hhash->State == HAL_HASH_STATE_SUSPENDED)) + { + return HAL_OK; + } + else + { + /* Busy error code field */ + hhash->ErrorCode |= HAL_HASH_ERROR_BUSY; +#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hhash->ErrorCallback(hhash); +#else + /*Call legacy weak error callback*/ + HAL_HASH_ErrorCallback(hhash); +#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Retrieve the message digest. + * @param hhash HASH handle + * @param pMsgDigest pointer to the computed digest. + * @param Size message digest size in bytes. + * @retval None + */ +static void HASH_GetDigest(const HASH_HandleTypeDef *hhash, const uint8_t *pMsgDigest, uint8_t Size) +{ + uint32_t msgdigest = (uint32_t)pMsgDigest; + + switch (Size) + { + case 20: /* SHA1 */ + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[0]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[1]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[2]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[3]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[4]); + break; + + case 28: /* SHA224 */ + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[0]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[1]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[2]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[3]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[4]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); + + break; + case 32: /* SHA256 */ + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[0]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[1]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[2]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[3]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[4]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[7]); + break; + case 48: /* SHA384 */ + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[0]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[1]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[2]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[3]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[4]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[7]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[8]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[9]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[10]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[11]); + break; + + case 64: /* SHA 512 */ + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[0]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[1]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[2]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[3]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(hhash->Instance->HR[4]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[5]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[6]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[7]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[8]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[9]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[10]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[11]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[12]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[13]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[14]); + msgdigest += 4U; + *(uint32_t *)(msgdigest) = __REV(HASH_DIGEST->HR[15]); + + break; + default: + break; + } +} + +/** + * @brief Handle HASH processing Timeout. + * @param hhash HASH handle. + * @param Flag specifies the HASH flag to check. + * @param Status the Flag status (SET or RESET). + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef HASH_WaitOnFlagUntilTimeout(HASH_HandleTypeDef *hhash, uint32_t Flag, FlagStatus Status, + uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + if (Status == RESET) + { + while (__HAL_HASH_GET_FLAG(hhash, Flag) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Set State to Ready to be able to restart later on */ + hhash->State = HAL_HASH_STATE_READY; + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + return HAL_ERROR; + } + } + } + } + else + { + while (__HAL_HASH_GET_FLAG(hhash, Flag) != RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Set State to Ready to be able to restart later on */ + hhash->State = HAL_HASH_STATE_READY; + hhash->ErrorCode |= HAL_HASH_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hhash); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @} + */ + + +#endif /* HAL_HASH_MODULE_ENABLED */ + +#endif /* HASH*/ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hcd.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hcd.c new file mode 100644 index 000000000..57cb5db53 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_hcd.c @@ -0,0 +1,1985 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_hcd.c + * @author MCD Application Team + * @brief HCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#)Declare a HCD_HandleTypeDef handle structure, for example: + HCD_HandleTypeDef hhcd; + + (#)Fill parameters of Init structure in HCD handle + + (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...) + + (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API: + (##) Enable the HCD/USB Low Level interface clock using the following macros + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + + (##) Initialize the related GPIO clocks + (##) Configure HCD pin-out + (##) Configure HCD NVIC interrupt + + (#)Associate the Upper USB Host stack to the HAL HCD Driver: + (##) hhcd.pData = phost; + + (#)Enable HCD transmission and reception: + (##) HAL_HCD_Start(); + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_HCD_MODULE_ENABLED +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/** @defgroup HCD HCD + * @brief HCD HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup HCD_Private_Functions HCD Private Functions + * @{ + */ +static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); +static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); +static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd); +static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HCD_Exported_Functions HCD Exported Functions + * @{ + */ + +/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd) +{ +#if defined (USB_OTG_FS) + const USB_OTG_GlobalTypeDef *USBx; +#endif /* defined (USB_OTG_FS) */ + + /* Check the HCD handle allocation */ + if (hhcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance)); + +#if defined (USB_OTG_FS) + USBx = hhcd->Instance; +#endif /* defined (USB_OTG_FS) */ + + if (hhcd->State == HAL_HCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hhcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->SOFCallback = HAL_HCD_SOF_Callback; + hhcd->ConnectCallback = HAL_HCD_Connect_Callback; + hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; + hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; + hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; + hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; + + if (hhcd->MspInitCallback == NULL) + { + hhcd->MspInitCallback = HAL_HCD_MspInit; + } + + /* Init the low level hardware */ + hhcd->MspInitCallback(hhcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_HCD_MspInit(hhcd); +#endif /* (USE_HAL_HCD_REGISTER_CALLBACKS) */ + } + + hhcd->State = HAL_HCD_STATE_BUSY; + +#if defined (USB_OTG_FS) + /* Disable DMA mode for FS instance */ + if (USBx == USB_OTG_FS) + { + hhcd->Init.dma_enable = 0U; + } +#endif /* defined (USB_OTG_FS) */ + + /* Disable the Interrupts */ + __HAL_HCD_DISABLE(hhcd); + + /* Init the Core (common init.) */ + if (USB_CoreInit(hhcd->Instance, hhcd->Init) != HAL_OK) + { + hhcd->State = HAL_HCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Host Mode */ + if (USB_SetCurrentMode(hhcd->Instance, USB_HOST_MODE) != HAL_OK) + { + hhcd->State = HAL_HCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Init Host */ + if (USB_HostInit(hhcd->Instance, hhcd->Init) != HAL_OK) + { + hhcd->State = HAL_HCD_STATE_ERROR; + return HAL_ERROR; + } + + hhcd->State = HAL_HCD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initialize a host channel. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number. + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed. + * This parameter can be one of these values: + * HCD_DEVICE_SPEED_HIGH: High speed mode, + * HCD_DEVICE_SPEED_FULL: Full speed mode, + * HCD_DEVICE_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type. + * This parameter can be one of these values: + * EP_TYPE_CTRL: Control type, + * EP_TYPE_ISOC: Isochronous type, + * EP_TYPE_BULK: Bulk type, + * EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size. + * This parameter can be a value from 0 to32K + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t epnum, + uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef status; + uint32_t HostCoreSpeed; + uint32_t HCcharMps = mps; + + __HAL_LOCK(hhcd); + hhcd->hc[ch_num].do_ping = 0U; + hhcd->hc[ch_num].dev_addr = dev_address; + hhcd->hc[ch_num].ch_num = ch_num; + hhcd->hc[ch_num].ep_type = ep_type; + hhcd->hc[ch_num].ep_num = epnum & 0x7FU; + + (void)HAL_HCD_HC_ClearHubInfo(hhcd, ch_num); + + if ((epnum & 0x80U) == 0x80U) + { + hhcd->hc[ch_num].ep_is_in = 1U; + } + else + { + hhcd->hc[ch_num].ep_is_in = 0U; + } + + HostCoreSpeed = USB_GetHostSpeed(hhcd->Instance); + + if (ep_type == EP_TYPE_ISOC) + { + /* FS device plugged to HS HUB */ + if ((speed == HCD_DEVICE_SPEED_FULL) && (HostCoreSpeed == HPRT0_PRTSPD_HIGH_SPEED)) + { + if (HCcharMps > ISO_SPLT_MPS) + { + /* ISO Max Packet Size for Split mode */ + HCcharMps = ISO_SPLT_MPS; + } + } + } + + hhcd->hc[ch_num].speed = speed; + hhcd->hc[ch_num].max_packet = (uint16_t)HCcharMps; + + status = USB_HC_Init(hhcd->Instance, ch_num, epnum, + dev_address, speed, ep_type, (uint16_t)HCcharMps); + + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief Halt a host channel. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(hhcd); + (void)USB_HC_Halt(hhcd->Instance, ch_num); + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief DeInitialize the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd) +{ + /* Check the HCD handle allocation */ + if (hhcd == NULL) + { + return HAL_ERROR; + } + + hhcd->State = HAL_HCD_STATE_BUSY; + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + if (hhcd->MspDeInitCallback == NULL) + { + hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hhcd->MspDeInitCallback(hhcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_HCD_MspDeInit(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + __HAL_HCD_DISABLE(hhcd); + + hhcd->State = HAL_HCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initialize the HCD MSP. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the HCD MSP. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions + * @brief HCD IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USB Host Data + Transfer + +@endverbatim + * @{ + */ + +/** + * @brief Submit a new URB for processing. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @param direction Channel number. + * This parameter can be one of these values: + * 0 : Output / 1 : Input + * @param ep_type Endpoint Type. + * This parameter can be one of these values: + * EP_TYPE_CTRL: Control type/ + * EP_TYPE_ISOC: Isochronous type/ + * EP_TYPE_BULK: Bulk type/ + * EP_TYPE_INTR: Interrupt type/ + * @param token Endpoint Type. + * This parameter can be one of these values: + * 0: HC_PID_SETUP / 1: HC_PID_DATA1 + * @param pbuff pointer to URB data + * @param length Length of URB data + * @param do_ping activate do ping protocol (for high speed only). + * This parameter can be one of these values: + * 0 : do ping inactive / 1 : do ping active + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, + uint8_t ch_num, + uint8_t direction, + uint8_t ep_type, + uint8_t token, + uint8_t *pbuff, + uint16_t length, + uint8_t do_ping) +{ + hhcd->hc[ch_num].ep_is_in = direction; + hhcd->hc[ch_num].ep_type = ep_type; + + if (token == 0U) + { + hhcd->hc[ch_num].data_pid = HC_PID_SETUP; + hhcd->hc[ch_num].do_ping = do_ping; + } + else + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + + /* Manage Data Toggle */ + switch (ep_type) + { + case EP_TYPE_CTRL: + if (token == 1U) /* send data */ + { + if (direction == 0U) + { + if (length == 0U) + { + /* For Status OUT stage, Length == 0U, Status Out PID = 1 */ + hhcd->hc[ch_num].toggle_out = 1U; + } + + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + else + { + if (hhcd->hc[ch_num].do_ssplit == 1U) + { + if (hhcd->hc[ch_num].toggle_in == 0U) + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + } + } + break; + + case EP_TYPE_BULK: + if (direction == 0U) + { + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + else + { + if (hhcd->hc[ch_num].toggle_in == 0U) + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + + break; + case EP_TYPE_INTR: + if (direction == 0U) + { + /* Set the Data Toggle bit as per the Flag */ + if (hhcd->hc[ch_num].toggle_out == 0U) + { + /* Put the PID 0 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + /* Put the PID 1 */ + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + else + { + if (hhcd->hc[ch_num].toggle_in == 0U) + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + } + else + { + hhcd->hc[ch_num].data_pid = HC_PID_DATA1; + } + } + break; + + case EP_TYPE_ISOC: + hhcd->hc[ch_num].data_pid = HC_PID_DATA0; + break; + + default: + break; + } + + hhcd->hc[ch_num].xfer_buff = pbuff; + hhcd->hc[ch_num].xfer_len = length; + hhcd->hc[ch_num].urb_state = URB_IDLE; + hhcd->hc[ch_num].xfer_count = 0U; + hhcd->hc[ch_num].ch_num = ch_num; + hhcd->hc[ch_num].state = HC_IDLE; + + return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num], (uint8_t)hhcd->Init.dma_enable); +} + +/** + * @brief Handle HCD interrupt request. + * @param hhcd HCD handle + * @retval None + */ +void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd) +{ + USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + uint32_t interrupt; + + /* Ensure that we are in device mode */ + if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST) + { + /* Avoid spurious interrupt */ + if (__HAL_HCD_IS_INVALID_INTERRUPT(hhcd)) + { + return; + } + + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + /* Incorrect mode, acknowledge the interrupt */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR)) + { + /* Incorrect mode, acknowledge the interrupt */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR); + } + + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE)) + { + /* Incorrect mode, acknowledge the interrupt */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE); + } + + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS)) + { + /* Incorrect mode, acknowledge the interrupt */ + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS); + } + + /* Handle Host Disconnect Interrupts */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT)) + { + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT); + + if ((USBx_HPRT0 & USB_OTG_HPRT_PCSTS) == 0U) + { + /* Flush USB Fifo */ + (void)USB_FlushTxFifo(USBx, 0x10U); + (void)USB_FlushRxFifo(USBx); + + if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY) + { + /* Restore FS Clock */ + (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); + } + + /* Handle Host Port Disconnect Interrupt */ +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->DisconnectCallback(hhcd); +#else + HAL_HCD_Disconnect_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + } + + /* Handle Host Port Interrupts */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT)) + { + HCD_Port_IRQHandler(hhcd); + } + + /* Handle Host SOF Interrupt */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->SOFCallback(hhcd); +#else + HAL_HCD_SOF_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Host channel Interrupt */ + if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT)) + { + interrupt = USB_HC_ReadInterrupt(hhcd->Instance); + for (i = 0U; i < hhcd->Init.Host_channels; i++) + { + if ((interrupt & (1UL << (i & 0xFU))) != 0U) + { + if ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_EPDIR) == USB_OTG_HCCHAR_EPDIR) + { + HCD_HC_IN_IRQHandler(hhcd, (uint8_t)i); + } + else + { + HCD_HC_OUT_IRQHandler(hhcd, (uint8_t)i); + } + } + } + __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT); + } + + /* Handle Rx Queue Level Interrupts */ + if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U) + { + USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + HCD_RXQLVL_IRQHandler(hhcd); + + USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + } +} + + +/** + * @brief SOF callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_SOF_Callback could be implemented in the user file + */ +} + +/** + * @brief Connection Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Connect_Callback could be implemented in the user file + */ +} + +/** + * @brief Disconnection Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} + +/** + * @brief Port Enabled Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} + +/** + * @brief Port Disabled Event callback. + * @param hhcd HCD handle + * @retval None + */ +__weak void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_Disconnect_Callback could be implemented in the user file + */ +} + +/** + * @brief Notify URB state change callback. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @param urb_state: + * This parameter can be one of these values: + * URB_IDLE/ + * URB_DONE/ + * URB_NOTREADY/ + * URB_NYET/ + * URB_ERROR/ + * URB_STALL/ + * @retval None + */ +__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hhcd); + UNUSED(chnum); + UNUSED(urb_state); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file + */ +} + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB HCD Callback + * To be used instead of the weak predefined callback + * @param hhcd USB HCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID + * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID + * @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID + * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enable callback ID + * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disable callback ID + * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, + HAL_HCD_CallbackIDTypeDef CallbackID, + pHCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_HCD_SOF_CB_ID : + hhcd->SOFCallback = pCallback; + break; + + case HAL_HCD_CONNECT_CB_ID : + hhcd->ConnectCallback = pCallback; + break; + + case HAL_HCD_DISCONNECT_CB_ID : + hhcd->DisconnectCallback = pCallback; + break; + + case HAL_HCD_PORT_ENABLED_CB_ID : + hhcd->PortEnabledCallback = pCallback; + break; + + case HAL_HCD_PORT_DISABLED_CB_ID : + hhcd->PortDisabledCallback = pCallback; + break; + + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = pCallback; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hhcd->State == HAL_HCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = pCallback; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + return status; +} + +/** + * @brief Unregister an USB HCD Callback + * USB HCD callback is redirected to the weak predefined callback + * @param hhcd USB HCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID + * @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID + * @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID + * @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enabled callback ID + * @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disabled callback ID + * @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hhcd); + + /* Setup Legacy weak Callbacks */ + if (hhcd->State == HAL_HCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_HCD_SOF_CB_ID : + hhcd->SOFCallback = HAL_HCD_SOF_Callback; + break; + + case HAL_HCD_CONNECT_CB_ID : + hhcd->ConnectCallback = HAL_HCD_Connect_Callback; + break; + + case HAL_HCD_DISCONNECT_CB_ID : + hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback; + break; + + case HAL_HCD_PORT_ENABLED_CB_ID : + hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback; + break; + + case HAL_HCD_PORT_DISABLED_CB_ID : + hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback; + break; + + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = HAL_HCD_MspInit; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hhcd->State == HAL_HCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_HCD_MSPINIT_CB_ID : + hhcd->MspInitCallback = HAL_HCD_MspInit; + break; + + case HAL_HCD_MSPDEINIT_CB_ID : + hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; + break; + + default : + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + return status; +} + +/** + * @brief Register USB HCD Host Channel Notify URB Change Callback + * To be used instead of the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback + * @param hhcd HCD handle + * @param pCallback pointer to the USB HCD Host Channel Notify URB Change Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, + pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + hhcd->HC_NotifyURBChangeCallback = pCallback; + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + + return status; +} + +/** + * @brief Unregister the USB HCD Host Channel Notify URB Change Callback + * USB HCD Host Channel Notify URB Change Callback is redirected + * to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hhcd); + + if (hhcd->State == HAL_HCD_STATE_READY) + { + hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hhcd); + + return status; +} +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the HCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd) +{ + __HAL_LOCK(hhcd); + /* Enable port power */ + (void)USB_DriveVbus(hhcd->Instance, 1U); + + /* Enable global interrupt */ + __HAL_HCD_ENABLE(hhcd); + __HAL_UNLOCK(hhcd); + + return HAL_OK; +} + +/** + * @brief Stop the host driver. + * @param hhcd HCD handle + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd) +{ + __HAL_LOCK(hhcd); + (void)USB_StopHost(hhcd->Instance); + __HAL_UNLOCK(hhcd); + + return HAL_OK; +} + +/** + * @brief Reset the host port. + * @param hhcd HCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd) +{ + return (USB_ResetPort(hhcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the HCD handle state. + * @param hhcd HCD handle + * @retval HAL state + */ +HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef const *hhcd) +{ + return hhcd->State; +} + +/** + * @brief Return URB state for a channel. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval URB state. + * This parameter can be one of these values: + * URB_IDLE/ + * URB_DONE/ + * URB_NOTREADY/ + * URB_NYET/ + * URB_ERROR/ + * URB_STALL + */ +HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef const *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].urb_state; +} + + +/** + * @brief Return the last host transfer size. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval last transfer size in byte + */ +uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef const *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].xfer_count; +} + +/** + * @brief Return the Host Channel state. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval Host channel state + * This parameter can be one of these values: + * HC_IDLE/ + * HC_XFRC/ + * HC_HALTED/ + * HC_NYET/ + * HC_NAK/ + * HC_STALL/ + * HC_XACTERR/ + * HC_BBLERR/ + * HC_DATATGLERR + */ +HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef const *hhcd, uint8_t chnum) +{ + return hhcd->hc[chnum].state; +} + +/** + * @brief Return the current Host frame number. + * @param hhcd HCD handle + * @retval Current Host frame number + */ +uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd) +{ + return (USB_GetCurrentFrame(hhcd->Instance)); +} + +/** + * @brief Return the Host enumeration speed. + * @param hhcd HCD handle + * @retval Enumeration speed + */ +uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd) +{ + return (USB_GetHostSpeed(hhcd->Instance)); +} + +/** + * @brief Set host channel Hub information. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @param addr Hub address + * @param PortNbr Hub port number + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_SetHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num, + uint8_t addr, uint8_t PortNbr) +{ + uint32_t HostCoreSpeed = USB_GetHostSpeed(hhcd->Instance); + + /* LS/FS device plugged to HS HUB */ + if ((hhcd->hc[ch_num].speed != HCD_DEVICE_SPEED_HIGH) && (HostCoreSpeed == HPRT0_PRTSPD_HIGH_SPEED)) + { + hhcd->hc[ch_num].do_ssplit = 1U; + + if ((hhcd->hc[ch_num].ep_type == EP_TYPE_CTRL) && (hhcd->hc[ch_num].ep_is_in != 0U)) + { + hhcd->hc[ch_num].toggle_in = 1U; + } + } + + hhcd->hc[ch_num].hub_addr = addr; + hhcd->hc[ch_num].hub_port_nbr = PortNbr; + + return HAL_OK; +} + + +/** + * @brief Clear host channel hub information. + * @param hhcd HCD handle + * @param ch_num Channel number. + * This parameter can be a value from 1 to 15 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HCD_HC_ClearHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num) +{ + hhcd->hc[ch_num].do_ssplit = 0U; + hhcd->hc[ch_num].do_csplit = 0U; + hhcd->hc[ch_num].hub_addr = 0U; + hhcd->hc[ch_num].hub_port_nbr = 0U; + + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup HCD_Private_Functions + * @{ + */ +/** + * @brief Handle Host Channel IN interrupt requests. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval none + */ +static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + const USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR); + hhcd->hc[chnum].state = HC_XACTERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_BBERR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_BBERR); + hhcd->hc[chnum].state = HC_BBLERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL); + hhcd->hc[chnum].state = HC_STALL; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR); + hhcd->hc[chnum].state = HC_DATATGLERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR); + hhcd->hc[chnum].state = HC_XACTERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else + { + /* ... */ + } + + if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR)) + { + (void)USB_HC_Halt(hhcd->Instance, chnum); + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC)) + { + /* Clear any pending ACK IT */ + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK); + + if (hhcd->hc[chnum].do_csplit == 1U) + { + hhcd->hc[chnum].do_csplit = 0U; + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + } + + if (hhcd->Init.dma_enable != 0U) + { + hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].XferSize - (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ); + } + + hhcd->hc[chnum].state = HC_XFRC; + hhcd->hc[chnum].ErrCnt = 0U; + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC); + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + (void)USB_HC_Halt(hhcd->Instance, chnum); + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK); + } + else if ((hhcd->hc[chnum].ep_type == EP_TYPE_INTR) || + (hhcd->hc[chnum].ep_type == EP_TYPE_ISOC)) + { + USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; + hhcd->hc[chnum].urb_state = URB_DONE; + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#else + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + else + { + /* ... */ + } + + if (hhcd->Init.dma_enable == 1U) + { + if ((((hhcd->hc[chnum].xfer_count + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet) & 1U) != 0U) + { + hhcd->hc[chnum].toggle_in ^= 1U; + } + } + else + { + hhcd->hc[chnum].toggle_in ^= 1U; + } + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK); + + if (hhcd->hc[chnum].do_ssplit == 1U) + { + hhcd->hc[chnum].do_csplit = 1U; + hhcd->hc[chnum].state = HC_ACK; + + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH); + + if (hhcd->hc[chnum].state == HC_XFRC) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_DONE; + } + else if (hhcd->hc[chnum].state == HC_STALL) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_STALL; + } + else if ((hhcd->hc[chnum].state == HC_XACTERR) || + (hhcd->hc[chnum].state == HC_DATATGLERR)) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].ErrCnt++; + if (hhcd->hc[chnum].ErrCnt > 2U) + { + hhcd->hc[chnum].ErrCnt = 0U; + + if (hhcd->hc[chnum].do_ssplit == 1U) + { + hhcd->hc[chnum].do_csplit = 0U; + hhcd->hc[chnum].ep_ss_schedule = 0U; + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + } + + hhcd->hc[chnum].urb_state = URB_ERROR; + } + else + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + /* re-activate the channel */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + } + } + } + else if (hhcd->hc[chnum].state == HC_NYET) + { + hhcd->hc[chnum].state = HC_HALTED; + + if (hhcd->hc[chnum].do_csplit == 1U) + { + if (hhcd->hc[chnum].ep_type == EP_TYPE_INTR) + { + hhcd->hc[chnum].NyetErrCnt++; + if (hhcd->hc[chnum].NyetErrCnt > 2U) + { + hhcd->hc[chnum].NyetErrCnt = 0U; + hhcd->hc[chnum].do_csplit = 0U; + + if (hhcd->hc[chnum].ErrCnt < 3U) + { + hhcd->hc[chnum].ep_ss_schedule = 1U; + } + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + hhcd->hc[chnum].urb_state = URB_ERROR; + } + else + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + } + } + else + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + } + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + /* re-activate the channel */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + } + } + } + else if (hhcd->hc[chnum].state == HC_ACK) + { + hhcd->hc[chnum].state = HC_HALTED; + + if (hhcd->hc[chnum].do_csplit == 1U) + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + + /* Set Complete split and re-activate the channel */ + USBx_HC(chnum)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT; + USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_NYET; + USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINT_ACK; + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + /* re-activate the channel */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + } + } + } + else if (hhcd->hc[chnum].state == HC_NAK) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_NOTREADY; + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + /* re-activate the channel */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + } + } + else if (hhcd->hc[chnum].state == HC_BBLERR) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].ErrCnt++; + hhcd->hc[chnum].urb_state = URB_ERROR; + } + else + { + if (hhcd->hc[chnum].state == HC_HALTED) + { + return; + } + } + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#else + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NYET)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET); + hhcd->hc[chnum].state = HC_NYET; + + if (hhcd->hc[chnum].do_ssplit == 0U) + { + hhcd->hc[chnum].ErrCnt = 0U; + } + + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK)) + { + if (hhcd->hc[chnum].ep_type == EP_TYPE_INTR) + { + hhcd->hc[chnum].ErrCnt = 0U; + hhcd->hc[chnum].state = HC_NAK; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) || + (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)) + { + hhcd->hc[chnum].ErrCnt = 0U; + + if ((hhcd->Init.dma_enable == 0U) || (hhcd->hc[chnum].do_csplit == 1U)) + { + hhcd->hc[chnum].state = HC_NAK; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + } + else + { + /* ... */ + } + + if (hhcd->hc[chnum].do_csplit == 1U) + { + hhcd->hc[chnum].do_csplit = 0U; + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + __HAL_HCD_UNMASK_ACK_HC_INT(chnum); + } + + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK); + } + else + { + /* ... */ + } +} + +/** + * @brief Handle Host Channel OUT interrupt requests. + * @param hhcd HCD handle + * @param chnum Channel number. + * This parameter can be a value from 1 to 15 + * @retval none + */ +static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum) +{ + const USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + uint32_t num_packets; + + if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR); + hhcd->hc[chnum].state = HC_XACTERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK); + + if (hhcd->hc[chnum].do_ping == 1U) + { + hhcd->hc[chnum].do_ping = 0U; + hhcd->hc[chnum].urb_state = URB_NOTREADY; + hhcd->hc[chnum].state = HC_ACK; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + + if ((hhcd->hc[chnum].do_ssplit == 1U) && (hhcd->hc[chnum].do_csplit == 0U)) + { + if (hhcd->hc[chnum].ep_type != EP_TYPE_ISOC) + { + hhcd->hc[chnum].do_csplit = 1U; + } + + hhcd->hc[chnum].state = HC_ACK; + (void)USB_HC_Halt(hhcd->Instance, chnum); + + /* reset error_count */ + hhcd->hc[chnum].ErrCnt = 0U; + } + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR); + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC)) + { + hhcd->hc[chnum].ErrCnt = 0U; + + /* transaction completed with NYET state, update do ping state */ + if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NYET)) + { + hhcd->hc[chnum].do_ping = 1U; + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET); + } + + if (hhcd->hc[chnum].do_csplit != 0U) + { + hhcd->hc[chnum].do_csplit = 0U; + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + } + + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC); + hhcd->hc[chnum].state = HC_XFRC; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NYET)) + { + hhcd->hc[chnum].state = HC_NYET; + + if (hhcd->hc[chnum].do_ssplit == 0U) + { + hhcd->hc[chnum].do_ping = 1U; + } + + hhcd->hc[chnum].ErrCnt = 0U; + (void)USB_HC_Halt(hhcd->Instance, chnum); + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL); + hhcd->hc[chnum].state = HC_STALL; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK)) + { + hhcd->hc[chnum].ErrCnt = 0U; + hhcd->hc[chnum].state = HC_NAK; + + if (hhcd->hc[chnum].do_ping == 0U) + { + if (hhcd->hc[chnum].speed == HCD_DEVICE_SPEED_HIGH) + { + hhcd->hc[chnum].do_ping = 1U; + } + } + + (void)USB_HC_Halt(hhcd->Instance, chnum); + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR)) + { + if (hhcd->Init.dma_enable == 0U) + { + hhcd->hc[chnum].state = HC_XACTERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + } + else + { + hhcd->hc[chnum].ErrCnt++; + if (hhcd->hc[chnum].ErrCnt > 2U) + { + hhcd->hc[chnum].ErrCnt = 0U; + hhcd->hc[chnum].urb_state = URB_ERROR; + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#else + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + else + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + } + } + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR)) + { + hhcd->hc[chnum].state = HC_DATATGLERR; + (void)USB_HC_Halt(hhcd->Instance, chnum); + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR); + } + else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH)) + { + __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH); + + if (hhcd->hc[chnum].state == HC_XFRC) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_DONE; + + if ((hhcd->hc[chnum].ep_type == EP_TYPE_BULK) || + (hhcd->hc[chnum].ep_type == EP_TYPE_INTR)) + { + if (hhcd->Init.dma_enable == 0U) + { + hhcd->hc[chnum].toggle_out ^= 1U; + } + + if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[chnum].xfer_len > 0U)) + { + num_packets = (hhcd->hc[chnum].xfer_len + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet; + + if ((num_packets & 1U) != 0U) + { + hhcd->hc[chnum].toggle_out ^= 1U; + } + } + } + } + else if (hhcd->hc[chnum].state == HC_ACK) + { + hhcd->hc[chnum].state = HC_HALTED; + + if (hhcd->hc[chnum].do_csplit == 1U) + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + } + } + else if (hhcd->hc[chnum].state == HC_NAK) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_NOTREADY; + + if (hhcd->hc[chnum].do_csplit == 1U) + { + hhcd->hc[chnum].do_csplit = 0U; + __HAL_HCD_CLEAR_HC_CSPLT(chnum); + } + } + else if (hhcd->hc[chnum].state == HC_NYET) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_NOTREADY; + } + else if (hhcd->hc[chnum].state == HC_STALL) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].urb_state = URB_STALL; + } + else if ((hhcd->hc[chnum].state == HC_XACTERR) || + (hhcd->hc[chnum].state == HC_DATATGLERR)) + { + hhcd->hc[chnum].state = HC_HALTED; + hhcd->hc[chnum].ErrCnt++; + if (hhcd->hc[chnum].ErrCnt > 2U) + { + hhcd->hc[chnum].ErrCnt = 0U; + hhcd->hc[chnum].urb_state = URB_ERROR; + } + else + { + hhcd->hc[chnum].urb_state = URB_NOTREADY; + + /* re-activate the channel */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + } + } + else + { + return; + } + +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#else + HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + else + { + return; + } +} + +/** + * @brief Handle Rx Queue Level interrupt requests. + * @param hhcd HCD handle + * @retval none + */ +static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd) +{ + const USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t pktsts; + uint32_t pktcnt; + uint32_t GrxstspReg; + uint32_t xferSizePktCnt; + uint32_t tmpreg; + uint32_t chnum; + + GrxstspReg = hhcd->Instance->GRXSTSP; + chnum = GrxstspReg & USB_OTG_GRXSTSP_EPNUM; + pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17; + pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4; + + switch (pktsts) + { + case GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer. */ + if ((pktcnt > 0U) && (hhcd->hc[chnum].xfer_buff != (void *)0)) + { + if ((hhcd->hc[chnum].xfer_count + pktcnt) <= hhcd->hc[chnum].xfer_len) + { + (void)USB_ReadPacket(hhcd->Instance, + hhcd->hc[chnum].xfer_buff, (uint16_t)pktcnt); + + /* manage multiple Xfer */ + hhcd->hc[chnum].xfer_buff += pktcnt; + hhcd->hc[chnum].xfer_count += pktcnt; + + /* get transfer size packet count */ + xferSizePktCnt = (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19; + + if ((hhcd->hc[chnum].max_packet == pktcnt) && (xferSizePktCnt > 0U)) + { + /* re-activate the channel when more packets are expected */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + hhcd->hc[chnum].toggle_in ^= 1U; + } + } + else + { + hhcd->hc[chnum].urb_state = URB_ERROR; + } + } + break; + + case GRXSTS_PKTSTS_DATA_TOGGLE_ERR: + break; + + case GRXSTS_PKTSTS_IN_XFER_COMP: + case GRXSTS_PKTSTS_CH_HALTED: + default: + break; + } +} + +/** + * @brief Handle Host Port interrupt requests. + * @param hhcd HCD handle + * @retval None + */ +static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd) +{ + const USB_OTG_GlobalTypeDef *USBx = hhcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0; + __IO uint32_t hprt0_dup; + + /* Handle Host Port Interrupts */ + hprt0 = USBx_HPRT0; + hprt0_dup = USBx_HPRT0; + + hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | \ + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + /* Check whether Port Connect detected */ + if ((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET) + { + if ((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS) + { +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->ConnectCallback(hhcd); +#else + HAL_HCD_Connect_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + hprt0_dup |= USB_OTG_HPRT_PCDET; + } + + /* Check whether Port Enable Changed */ + if ((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG) + { + hprt0_dup |= USB_OTG_HPRT_PENCHNG; + + if ((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA) + { + if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY) + { + if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17)) + { + (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_6_MHZ); + } + else + { + (void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ); + } + } + else + { + if (hhcd->Init.speed == HCD_SPEED_FULL) + { + USBx_HOST->HFIR = HFIR_60_MHZ; + } + } +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->PortEnabledCallback(hhcd); +#else + HAL_HCD_PortEnabled_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + + } + else + { +#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U) + hhcd->PortDisabledCallback(hhcd); +#else + HAL_HCD_PortDisabled_Callback(hhcd); +#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */ + } + } + + /* Check for an overcurrent */ + if ((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG) + { + hprt0_dup |= USB_OTG_HPRT_POCCHNG; + } + + /* Clear Port Interrupts */ + USBx_HPRT0 = hprt0_dup; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_HCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c.c new file mode 100644 index 000000000..72fdb1cad --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c.c @@ -0,0 +1,7809 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master or memory IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +#if defined(HAL_DMA_MODULE_ENABLED) +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) (__HAL_DMA_GET_COUNTER(__HANDLE__) + HAL_DMAEx_GetFifoLevel(__HANDLE__)) +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +#if defined(HAL_DMA_MODULE_ENABLED) +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +#if defined(HAL_DMA_MODULE_ENABLED) +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +#endif /* HAL_DMA_MODULE_ENABLED */ + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hi2c->pBuffPtr; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + +#if defined(HAL_DMA_MODULE_ENABLED) + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] \ + = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master or memory I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + HAL_I2C_ModeTypeDef tmp_mode = hi2c->Mode; + + if ((tmp_mode == HAL_I2C_MODE_MASTER) || (tmp_mode == HAL_I2C_MODE_MEM)) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + +#if defined(HAL_DMA_MODULE_ENABLED) + uint32_t tmppreviousstate; +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef dmaxferstatus = HAL_OK; + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if ((hi2c->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hi2c->pBuffPtr; + + /* Set DMA destination address */ + hi2c->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hi2c->Instance->TXDR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmatx); + } + else + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + + if (dmaxferstatus != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef dmaxferstatus = HAL_OK; + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if ((hi2c->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2c->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2c->XferSize; + + /* Set DMA source address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hi2c->Instance->RXDR; + + /* Set DMA destination address */ + hi2c->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hi2c->pBuffPtr; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hi2c->hdmarx); + } + else + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize); + } + + if (dmaxferstatus != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + +#if defined(HAL_DMA_MODULE_ENABLED) + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) +#endif /* HAL_DMA_MODULE_ENABLED */ + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + +#if defined(HAL_DMA_MODULE_ENABLED) + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c_ex.c new file mode 100644 index 000000000..10853efa4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2c_ex.c @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32H7RSxx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_ConfigFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Fast Mode Plus. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param FastModePlus New state of the Fast Mode Plus. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigFastModePlus(I2C_HandleTypeDef *hi2c, uint32_t FastModePlus) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_FASTMODEPLUS(FastModePlus)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + if (FastModePlus == I2C_FASTMODEPLUS_ENABLE) + { + /* Set I2Cx FMP bit */ + hi2c->Instance->CR1 |= (I2C_CR1_FMP); + } + else + { + /* Reset I2Cx FMP bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_FMP); + } + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s.c new file mode 100644 index 000000000..04bdfee60 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s.c @@ -0,0 +1,2710 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2s.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream/Channel. + (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream/Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_CLOCK_VALUE in the stm32h7rsxx_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + + *** I2S HAL driver macros list *** + =================================== + [..] + Below the list of most used macros in I2S HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + *** I2S HAL driver macros list *** + =================================== + [..] + Callback registration: + + (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1UL + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. + + Function HAL_I2S_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : I2S Tx Completed callback + (+) RxCpltCallback : I2S Rx Completed callback + (+) TxRxCpltCallback : I2S TxRx Completed callback + (+) TxHalfCpltCallback : I2S Tx Half Completed callback + (+) RxHalfCpltCallback : I2S Rx Half Completed callback + (+) TxRxHalfCpltCallback : I2S TxRx Half Completed callback + (+) ErrorCallback : I2S Error callback + (+) MspInitCallback : I2S Msp Init callback + (+) MspDeInitCallback : I2S Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : I2S Tx Completed callback + (+) RxCpltCallback : I2S Rx Completed callback + (+) TxRxCpltCallback : I2S TxRx Completed callback + (+) TxHalfCpltCallback : I2S Tx Half Completed callback + (+) RxHalfCpltCallback : I2S Rx Half Completed callback + (+) TxRxHalfCpltCallback : I2S TxRx Half Completed callback + (+) ErrorCallback : I2S Error callback + (+) MspInitCallback : I2S Msp Init callback + (+) MspDeInitCallback : I2S Msp DeInit callback + + By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() + or HAL_I2S_Init() function. + + When The compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#ifdef HAL_I2S_MODULE_ENABLED + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Define I2S Private Define + * @{ + */ +#define I2S_TIMEOUT 0xFFFFUL +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2SEx_DMATxRxCplt(DMA_HandleTypeDef *hdma); +static void I2SEx_DMATxRxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_16Bit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Transmit_32Bit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_16Bit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_32Bit_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Tickstart, uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv; + uint32_t i2sodd; + uint32_t packetlength; + uint32_t tmp; + uint32_t i2sclk; + uint32_t ispcm; + + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + assert_param(IS_I2S_FIRST_BIT(hi2s->Init.FirstBit)); + assert_param(IS_I2S_WS_INVERSION(hi2s->Init.WSInversion)); + assert_param(IS_I2S_DATA_24BIT_ALIGNMENT(hi2s->Init.Data24BitAlignment)); + assert_param(IS_I2S_MASTER_KEEP_IO_STATE(hi2s->Init.MasterKeepIOState)); + + if (hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + /* Init the I2S Callback settings */ + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hi2s->MspInitCallback == NULL) + { + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hi2s->MspInitCallback(hi2s); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the selected I2S peripheral */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) == SPI_CR1_SPE) + { + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + } + + /* Clear I2S configuration register */ + CLEAR_REG(hi2s->Instance->I2SCFGR); + + if (IS_I2S_MASTER(hi2s->Init.Mode)) + { + /*------------------------- I2SDIV and ODD Calculation ---------------------*/ + /* If the requested audio frequency is not the default, compute the prescaler */ + if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) ********************/ + if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) + { + /* Channel length is 32 bits */ + packetlength = 2UL; + } + else + { + /* Channel length is 16 bits */ + packetlength = 1UL; + } + + /* Check if PCM standard is used */ + if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || + (hi2s->Init.Standard == I2S_STANDARD_PCM_LONG)) + { + ispcm = 1UL; + } + else + { + ispcm = 0UL; + } + + /* Get the source clock value: based on System Clock value */ + if (hi2s->Instance == SPI1) + { + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI1); + } + else if ((hi2s->Instance == SPI2) || (hi2s->Instance == SPI3)) + { + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI23); + } + else /* SPI6 source clock */ + { + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI6); + } + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (uint32_t)((((i2sclk / (256UL >> ispcm)) * 10UL) / hi2s->Init.AudioFreq) + 5UL); + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)((((i2sclk / ((32UL >> ispcm) * packetlength)) * 10UL) / hi2s->Init.AudioFreq) + 5UL); + } + + /* Remove the flatting point */ + tmp = tmp / 10UL; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1UL); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2UL); + } + else + { + /* Set the default values */ + i2sdiv = 2UL; + i2sodd = 0UL; + } + + /* Test if the obtain values are forbidden or out of range */ + if (((i2sodd == 1UL) && (i2sdiv == 1UL)) || (i2sdiv > 0xFFUL)) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); + return HAL_ERROR; + } + + /* Force i2smod to 1 just to be sure that (2xi2sdiv + i2sodd) is always higher than 0 */ + if (i2sdiv == 0UL) + { + i2sodd = 1UL; + } + + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_I2SDIV | SPI_I2SCFGR_ODD), + ((i2sdiv << SPI_I2SCFGR_I2SDIV_Pos) | (i2sodd << SPI_I2SCFGR_ODD_Pos))); + } + + /*-------------------------- I2Sx I2SCFGR Configuration --------------------*/ + /* Configure I2SMOD, I2SCFG, I2SSTD, PCMSYNC, DATLEN ,CHLEN ,CKPOL, WSINV, DATAFMT, I2SDIV, ODD and MCKOE bits bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | \ + SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_WSINV | \ + SPI_I2SCFGR_DATFMT | SPI_I2SCFGR_MCKOE), + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ + hi2s->Init.Standard | hi2s->Init.DataFormat | \ + hi2s->Init.CPOL | hi2s->Init.WSInversion | \ + hi2s->Init.Data24BitAlignment | hi2s->Init.MCLKOutput)); + /*Clear status register*/ + WRITE_REG(hi2s->Instance->IFCR, 0x0FF8); + + /*---------------------------- I2Sx CFG2 Configuration ----------------------*/ + + /* Unlock the AF configuration to configure CFG2 register*/ + CLEAR_BIT(hi2s->Instance->CR1, SPI_CR1_IOLOCK); + + MODIFY_REG(hi2s->Instance->CFG2, SPI_CFG2_LSBFRST, hi2s->Init.FirstBit); + + /* Insure that AFCNTR is managed only by Master */ + if (IS_I2S_MASTER(hi2s->Init.Mode)) + { + /* Alternate function GPIOs control */ + MODIFY_REG(hi2s->Instance->CFG2, SPI_CFG2_AFCNTR, (hi2s->Init.MasterKeepIOState)); + } + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + if (hi2s->MspDeInitCallback == NULL) + { + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hi2s->MspDeInitCallback(hi2s); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) +/** + * @brief Register a User I2S Callback + * To be used instead of the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = pCallback; + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_RX_COMPLETE_CB_ID : + hi2s->TxRxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = pCallback; + break; + + + case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : + hi2s->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = pCallback; + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} + +/** + * @brief Unregister an I2S Callback + * I2S callback is redirected to the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_I2S_TX_RX_COMPLETE_CB_ID : + hi2s->TxRxCpltCallback = HAL_I2SEx_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID : + hi2s->TxRxHalfCpltCallback = HAL_I2SEx_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + (++) HAL_I2SEx_TransmitReceive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + (++) HAL_I2SEx_TransmitReceive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + (++) HAL_I2SEx_TransmitReceive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2SEx_TxRxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->TXDR)); +#endif /* __GNUC__ */ + uint32_t tickstart; + + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = (const uint16_t *)pData; + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + + /* Initialize fields not used in handle to zero */ + hi2s->pRxBuffPtr = NULL; + hi2s->RxXferSize = (uint16_t) 0UL; + hi2s->RxXferCount = (uint16_t) 0UL; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + + /* Wait until TXP flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXP, SET, tickstart, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_TIMEOUT; + } + + while (hi2s->TxXferCount > 0UL) + { + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + /* Transmit data in 32 Bit mode */ + hi2s->Instance->TXDR = *((const uint32_t *)hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr += 2; + hi2s->TxXferCount--; + } + else + { + /* Transmit data in 16 Bit mode */ +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hi2s->pTxBuffPtr); +#else + *((__IO uint16_t *)&hi2s->Instance->TXDR) = *((const uint16_t *)hi2s->pTxBuffPtr); +#endif /* __GNUC__ */ + + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + } + + /* Wait until TXP flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXP, SET, tickstart, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_TIMEOUT; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continuous way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if defined (__GNUC__) + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->RXDR)); +#endif /* __GNUC__ */ + uint32_t tickstart; + + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + + /* Initialize fields not used in handle to zero */ + hi2s->pTxBuffPtr = NULL; + hi2s->TxXferSize = (uint16_t) 0UL; + hi2s->TxXferCount = (uint16_t) 0UL; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + /* Receive data */ + while (hi2s->RxXferCount > 0UL) + { + /* Wait until RXP flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXP, SET, tickstart, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_TIMEOUT; + } + + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + /* Receive data in 32 Bit mode */ + *((uint32_t *)hi2s->pRxBuffPtr) = hi2s->Instance->RXDR; + hi2s->pRxBuffPtr += 2; + hi2s->RxXferCount--; + } + else + { + /* Receive data in 16 Bit mode */ +#if defined (__GNUC__) + *((uint16_t *)hi2s->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hi2s->pRxBuffPtr) = *((__IO uint16_t *)&hi2s->Instance->RXDR); +#endif /* __GNUC__ */ + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + } + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Full-Duplex Transmit/Receive data in blocking mode. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData a 16-bit pointer to the Transmit data buffer. + * @param pRxData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tmp_TxXferCount; + uint32_t tmp_RxXferCount; + uint32_t tickstart; + +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->TXDR)); + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->RXDR)); +#endif /* __GNUC__ */ + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->pTxBuffPtr = (const uint16_t *)pTxData; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + hi2s->pRxBuffPtr = pRxData; + + tmp_TxXferCount = hi2s->TxXferCount; + tmp_RxXferCount = hi2s->RxXferCount; + + /* Set state and reset error code */ + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + while ((tmp_TxXferCount > 0UL) || (tmp_RxXferCount > 0UL)) + { + if ((__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXP) == SET) && (tmp_TxXferCount != 0UL)) + { + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + /* Transmit data in 32 Bit mode */ + hi2s->Instance->TXDR = *((const uint32_t *)hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr += 2; + tmp_TxXferCount--; + } + else + { + /* Transmit data in 16 Bit mode */ +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hi2s->pTxBuffPtr); +#else + *((__IO uint16_t *)&hi2s->Instance->TXDR) = *((const uint16_t *)hi2s->pTxBuffPtr); +#endif /* __GNUC__ */ + + hi2s->pTxBuffPtr++; + tmp_TxXferCount--; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + if ((__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXP) == SET) && (tmp_RxXferCount != 0UL)) + { + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + /* Receive data in 32 Bit mode */ + *((uint32_t *)hi2s->pRxBuffPtr) = hi2s->Instance->RXDR; + hi2s->pRxBuffPtr += 2; + tmp_RxXferCount--; + } + else + { + /* Receive data in 16 Bit mode */ +#if defined (__GNUC__) + *((uint16_t *)hi2s->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hi2s->pRxBuffPtr) = *((__IO uint16_t *)&hi2s->Instance->RXDR); +#endif /* __GNUC__ */ + hi2s->pRxBuffPtr++; + tmp_RxXferCount--; + } + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_TIMEOUT; + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = (const uint16_t *)pData; + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + + /* Initialize fields not used in handle to zero */ + hi2s->pRxBuffPtr = NULL; + hi2s->RxXferSize = (uint16_t) 0UL; + hi2s->RxXferCount = (uint16_t) 0UL; + + /* Set the function for IT treatment */ + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + hi2s->TxISR = I2S_Transmit_32Bit_IT; + } + else + { + hi2s->TxISR = I2S_Transmit_16Bit_IT; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Enable TXP and UDR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_UDR)); + + /* Enable TIFRE interrupt if the mode is Slave */ + if (hi2s->Init.Mode == I2S_MODE_SLAVE_TX) + { + __HAL_I2S_ENABLE_IT(hi2s, I2S_IT_FRE); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + + /* Initialize fields not used in handle to zero */ + hi2s->pTxBuffPtr = NULL; + hi2s->TxXferSize = (uint16_t) 0UL; + hi2s->TxXferCount = (uint16_t) 0UL; + + /* Set the function for IT treatment */ + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + hi2s->RxISR = I2S_Receive_32Bit_IT; + } + else + { + hi2s->RxISR = I2S_Receive_16Bit_IT; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + /* Enable RXP and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXP | I2S_IT_OVR)); + + /* Enable TIFRE interrupt if the mode is Slave */ + if (hi2s->Init.Mode == I2S_MODE_SLAVE_RX) + { + __HAL_I2S_ENABLE_IT(hi2s, I2S_IT_FRE); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData a 16-bit pointer to the Transmit data buffer. + * @param pRxData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size) +{ + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + hi2s->pTxBuffPtr = (const uint16_t *)pTxData; + hi2s->pRxBuffPtr = pRxData; + + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + + + /* Set the function for IT treatment */ + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_24B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_32B)) + { + hi2s->TxISR = I2S_Transmit_32Bit_IT; + hi2s->RxISR = I2S_Receive_32Bit_IT; + } + else + { + hi2s->TxISR = I2S_Transmit_16Bit_IT; + hi2s->RxISR = I2S_Receive_16Bit_IT; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Enable TXP, RXP, DXP, UDR, OVR interrupts */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_RXP | I2S_IT_DXP | I2S_IT_UDR | I2S_IT_OVR)); + + /* Enable TIFRE interrupt if the mode is Slave */ + if (hi2s->Init.Mode == I2S_MODE_SLAVE_FULLDUPLEX) + { + __HAL_I2S_ENABLE_IT(hi2s, I2S_IT_FRE); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return HAL_OK; + +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Transmit data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = (const uint16_t *)pData; + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hi2s->pRxBuffPtr = NULL; + hi2s->RxXferSize = (uint16_t)0UL; + hi2s->RxXferCount = (uint16_t)0UL; + + /* Set the I2S Tx DMA Half transfer complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfer complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B_EXTENDED)) + { + hi2s->TxXferCount = Size * 2U; + } + else + { + hi2s->TxXferCount = Size * 4U; + } + + /* Enable the Tx DMA Stream/Channel */ + if ((hi2s->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2s->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2s->TxXferCount; + + /* Set DMA source address */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hi2s->pTxBuffPtr; + + /* Set DMA destination address */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hi2s->Instance->TXDR; + + errorcode = HAL_DMAEx_List_Start_IT(hi2s->hdmatx); + } + else + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hi2s->hdmatx, (uint32_t)hi2s->pTxBuffPtr, (uint32_t)&hi2s->Instance->TXDR, + hi2s->TxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update I2S error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + errorcode = HAL_ERROR; + return errorcode; + } + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN); + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR1, SPI_CR1_SPE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + if ((pData == NULL) || (Size == 0UL)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hi2s->pTxBuffPtr = NULL; + hi2s->TxXferSize = (uint16_t)0UL; + hi2s->TxXferCount = (uint16_t)0UL; + + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B_EXTENDED)) + { + hi2s->RxXferCount = Size * 2U; + } + else + { + hi2s->RxXferCount = Size * 4U; + } + + /* Enable the Rx DMA Stream/Channel */ + if ((hi2s->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2s->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2s->RxXferCount; + + /* Set DMA source address */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hi2s->Instance->RXDR; + + /* Set DMA destination address */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hi2s->pRxBuffPtr; + + errorcode = HAL_DMAEx_List_Start_IT(hi2s->hdmarx); + } + else + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->RXDR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update I2S error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + __HAL_UNLOCK(hi2s); + return errorcode; + } + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN); + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR1, SPI_CR1_SPE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return errorcode; +} + +/** + * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData a 16-bit pointer to the Transmit data buffer. + * @param pRxData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, const uint16_t *pTxData, uint16_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + hi2s->pTxBuffPtr = (const uint16_t *)pTxData; + hi2s->pRxBuffPtr = pRxData; + + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + + /* Reset the Tx/Rx DMA bits */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN); + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2SEx_DMATxRxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2SEx_DMATxRxCplt; + + /* Set the I2S Rx DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B_EXTENDED)) + { + hi2s->TxXferCount = Size * 2U; + } + else + { + hi2s->TxXferCount = Size * 4U; + } + + /* Enable the Tx DMA Stream/Channel */ + if ((hi2s->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2s->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2s->TxXferCount; + + /* Set DMA source address */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hi2s->pTxBuffPtr; + + /* Set DMA destination address */ + hi2s->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hi2s->Instance->TXDR; + + errorcode = HAL_DMAEx_List_Start_IT(hi2s->hdmatx); + } + else + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hi2s->hdmatx, (uint32_t)hi2s->pTxBuffPtr, (uint32_t)&hi2s->Instance->TXDR, + hi2s->TxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update I2S error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + errorcode = HAL_ERROR; + return errorcode; + } + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN); + } + + if ((hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) || (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B_EXTENDED)) + { + hi2s->RxXferCount = Size * 2U; + } + else + { + hi2s->RxXferCount = Size * 4U; + } + + /* Enable the Rx DMA Stream/Channel */ + if ((hi2s->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hi2s->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hi2s->RxXferCount; + + /* Set DMA source address */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hi2s->Instance->RXDR; + + /* Set DMA destination address */ + hi2s->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hi2s->pRxBuffPtr; + + errorcode = HAL_DMAEx_List_Start_IT(hi2s->hdmarx); + } + else + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->RXDR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update I2S error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + __HAL_UNLOCK(hi2s); + return errorcode; + } + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN); + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR1, SPI_CR1_SPE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + __HAL_UNLOCK(hi2s); + return errorcode; +} + +/** + * @brief Pauses the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + + /* Check if the I2S peripheral is in master mode */ + if (IS_I2S_MASTER(hi2s->Init.Mode)) + { + /* Check if there is a transfer on-going */ + if (HAL_IS_BIT_SET(hi2s->Instance->CR1, SPI_CR1_CSTART) == 0UL) + { + /* Set error code to no on going transfer */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_NO_OGT); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSUSP); + + while (HAL_IS_BIT_SET(hi2s->Instance->CR1, SPI_CR1_CSTART) != 0UL) + { + if ((((HAL_GetTick() - tickstart) >= I2S_TIMEOUT) && (I2S_TIMEOUT != HAL_MAX_DELAY)) || (I2S_TIMEOUT == 0U)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + /* Set error code to not supported */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_NOT_SUPPORTED); + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_ERROR; + } +} + +/** + * @brief Resumes the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + + /* Start the transfer */ + SET_BIT(hi2s->Instance->CR1, SPI_CR1_CSTART); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Stops the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL I2S API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + */ + + /* Disable the I2S Tx/Rx DMA requests */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN); + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN); + + /* Abort the I2S DMA tx Stream/Channel */ + if (hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA tx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Abort the I2S DMA rx Stream/Channel */ + if (hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA rx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + + return errorcode; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sier = hi2s->Instance->IER; + uint32_t i2ssr = hi2s->Instance->SR; + uint32_t trigger = i2sier & i2ssr; + + if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* I2S in mode Receiver ------------------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_RXP) && HAL_IS_BIT_CLR(trigger, I2S_FLAG_OVR)) + { + hi2s->RxISR(hi2s); + } + + /* I2S Overrun error interrupt occurred -------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_OVR)) + { + /* Disable RXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXP | I2S_IT_ERR)); + + /* Clear Overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + } + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* I2S in mode Transmitter -----------------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_TXP) && HAL_IS_BIT_CLR(trigger, I2S_FLAG_UDR)) + { + hi2s->TxISR(hi2s); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_UDR)) + { + /* Disable TXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_ERR)); + + /* Clear Underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + } + if (hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) + { + /* I2S in mode Transmitter -----------------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_DXP)) + { + hi2s->TxISR(hi2s); + hi2s->RxISR(hi2s); + } + /* I2S in mode Receiver ------------------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_RXP) && HAL_IS_BIT_CLR(trigger, I2S_FLAG_DXP)) + { + hi2s->RxISR(hi2s); + } + /* I2S in mode Transmitter -----------------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_TXP) && HAL_IS_BIT_CLR(trigger, I2S_FLAG_DXP)) + { + hi2s->TxISR(hi2s); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_UDR)) + { + /* Disable TXP, RXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_RXP | I2S_IT_ERR)); + + /* Clear Underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + /* I2S Overrun error interrupt occurred -------------------------------------*/ + if (HAL_IS_BIT_SET(trigger, I2S_FLAG_OVR)) + { + /* Disable TXP, RXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_RXP | I2S_IT_ERR)); + + /* Clear Overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(const I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(const I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_Private_Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN); + + hi2s->TxXferCount = (uint16_t) 0UL; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Call user Tx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->TxHalfCpltCallback(hi2s); +#else + HAL_I2S_TxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN); + hi2s->RxXferCount = (uint16_t)0UL; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Call user Rx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->RxHalfCpltCallback(hi2s); +#else + HAL_I2S_RxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2SEx_DMATxRxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_TXDMAEN); + hi2s->TxXferCount = (uint16_t) 0UL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CFG1, SPI_CFG1_RXDMAEN); + hi2s->RxXferCount = (uint16_t)0UL; + + /* Updated HAL State */ + hi2s->State = HAL_I2S_STATE_READY; + } + + /* Call user TxRx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxRxCpltCallback(hi2s); +#else + HAL_I2SEx_TxRxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2SEx_DMATxRxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Call user TxRx Half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxRxHalfCpltCallback(hi2s); +#else + HAL_I2SEx_TxRxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S communication error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CFG1, (SPI_CFG1_RXDMAEN | SPI_CFG1_TXDMAEN)); + hi2s->TxXferCount = (uint16_t) 0UL; + hi2s->RxXferCount = (uint16_t) 0UL; + + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief Manage the transmission 16-bit in Interrupt context + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_16Bit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->TXDR)); + + *ptxdr_16bits = *((const uint16_t *)hi2s->pTxBuffPtr); +#else + *((__IO uint16_t *)&hi2s->Instance->TXDR) = *((const uint16_t *)hi2s->pTxBuffPtr); +#endif /* __GNUC__ */ + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0UL) + { + /* Disable TXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_ERR)); + + if ((hi2s->Init.Mode == I2S_MODE_SLAVE_TX) || (hi2s->Init.Mode == I2S_MODE_MASTER_TX)) + { + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Manage the transmission 32-bit in Interrupt context + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_32Bit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->TXDR = *((const uint32_t *)hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr += 2; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0UL) + { + /* Disable TXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_ERR)); + + if ((hi2s->Init.Mode == I2S_MODE_SLAVE_TX) || (hi2s->Init.Mode == I2S_MODE_MASTER_TX)) + { + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Manage the reception 16-bit in Interrupt context + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_16Bit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ +#if defined (__GNUC__) + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hi2s->Instance->RXDR)); + + *((uint16_t *)hi2s->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hi2s->pRxBuffPtr) = *((__IO uint16_t *)&hi2s->Instance->RXDR); +#endif /* __GNUC__ */ + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0UL) + { + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + /* Disable TXP, RXP, DXP, ERR interrupts */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_RXP | I2S_IT_DXP | I2S_IT_ERR)); + } + else + { + /* Disable RXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXP | I2S_IT_ERR)); + } + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + hi2s->TxRxCpltCallback(hi2s); + } + else + { + hi2s->RxCpltCallback(hi2s); + } +#else + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + HAL_I2SEx_TxRxCpltCallback(hi2s); + } + else + { + HAL_I2S_RxCpltCallback(hi2s); + } +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Manage the reception 32-bit in Interrupt context + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_32Bit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + *((uint32_t *)hi2s->pRxBuffPtr) = hi2s->Instance->RXDR; + hi2s->pRxBuffPtr += 2; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0UL) + { + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + /* Disable TXP, RXP, DXP, ERR interrupts */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXP | I2S_IT_RXP | I2S_IT_DXP | I2S_IT_ERR)); + } + else + { + /* Disable RXP and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXP | I2S_IT_ERR)); + } + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL) + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + hi2s->TxRxCpltCallback(hi2s); + } + else + { + hi2s->RxCpltCallback(hi2s); + } +#else + if (IS_I2S_FULLDUPLEX(hi2s->Init.Mode)) + { + HAL_I2SEx_TxRxCpltCallback(hi2s); + } + else + { + HAL_I2S_RxCpltCallback(hi2s); + } +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Tickstart Tick start value + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set to status*/ + while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) >= Timeout) || (Timeout == 0UL)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2S_MODULE_ENABLED */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s_ex.c new file mode 100644 index 000000000..081dfce91 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i2s_ex.c @@ -0,0 +1,31 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_i2s_ex.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2S extension peripheral: + * + Extension features Functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** + ****************************************************************************** + ===== I2S FULL DUPLEX FEATURE ===== + I2S Full Duplex APIs are available in stm32h7rsxx_hal_i2s.c/.h + ****************************************************************************** + */ + + + + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i3c.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i3c.c new file mode 100644 index 000000000..7f5c09dbd --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_i3c.c @@ -0,0 +1,9623 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_hal_i3c.c + * @author MCD Application Team + * @brief I3C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Improvement Inter Integrated Circuit (I3C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + @verbatim + ====================================================================================================================== + ##### How to use this driver ##### + ====================================================================================================================== + [..] + The I3C HAL driver can be used as follows: + + (#) Declare a I3C_HandleTypeDef handle structure, for example: + I3C_HandleTypeDef hi3c; + + (#) Declare a I3C_XferTypeDef transfer descriptor structure, for example: + I3C_XferTypeDef ContextBuffers; + + (#)Initialize the I3C low level resources by implementing the HAL_I3C_MspInit() API: + (##) Enable the I3Cx interface clock + (##) I3C pins configuration + (+++) Enable the clock for the I3C GPIOs + (+++) Configure I3C pins as alternate function push-pull with no-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I3Cx interrupt priority + (+++) Enable the NVIC I3C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the Command Common Code (CCC) management channel + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit channel + (+++) Declare a DMA_HandleTypeDef handle structure for + the receive channel + (+++) Declare a DMA_HandleTypeDef handle structure for + the status channel + (+++) Enable the DMAx interface clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Command Common Code (CCC) channel + (+++) Configure the DMA Tx channel + (+++) Configure the DMA Rx channel + (+++) Configure the DMA Status channel + (+++) Associate the initialized DMA handle to the hi3c DMA CCC, Tx, Rx or Status handle as necessary + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA CCC, Tx, Rx or Status instance + + (#) Configure the HAL I3C Communication Mode as Controller or Target in the hi3c Init structure. + + (#) Configure the Controller Communication Bus characterics for Controller mode. + This mean, configure the parameters SDAHoldTime, WaitTime, SCLPPLowDuration, + SCLI3CHighDuration, SCLODLowDuration, SCLI2CHighDuration, BusFreeDuration, + BusIdleDuration in the LL_I3C_CtrlBusConfTypeDef structure through h3c Init structure. + + (#) Configure the Target Communication Bus characterics for Target mode. + This mean, configure the parameter BusAvailableDuration in the LL_I3C_TgtBusConfTypeDef structure + through h3c Init structure. + + All these parameters for Controller or Target can be configured directly in user code or + by using CubeMx generation. + To help the computation of the different parameters, the recommendation is to use CubeMx. + + Those parameters can be modified after the hi3c initialization by using + HAL_I3C_Ctrl_BusCharacteristicConfig() for controller and + HAL_I3C_Tgt_BusCharacteristicConfig() for target. + + (#) Initialize the I3C registers by calling the HAL_I3C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I3C_MspInit(&hi3c) API. + + (#) Configure the different FIFO parameters in I3C_FifoConfTypeDef structure as RxFifoThreshold, TxFifoThreshold + for Controller or Target mode. + And enable/disable the Control or Status FIFO only for Controller Mode. + Use HAL_I3C_SetConfigFifo() function to finalize the configuration, and HAL_I3C_GetConfigFifo() to retrieve + FIFO configuration. + Possibility to clear the FIFO configuration by using HAL_I3C_ClearConfigFifo() which reset the configuration + FIFO to their default hardware value + + (#) Configure the different additional Controller configuration in I3C_CtrlConfTypeDef structure as DynamicAddr, + StallTime, HotJoinAllowed, ACKStallState, CCCStallState, TxStallState, RxStallState, HighKeeperSDA. + Use HAL_I3C_Ctrl_Config() function to finalize the Controller configuration. + + (#) Configure the different additional Target configuration in I3C_TgtConfTypeDef structure as Identifier, + MIPIIdentifier, CtrlRoleRequest, HotJoinRequest, IBIRequest, IBIPayload, IBIPayloadSize, MaxReadDataSize, + MaxWriteDataSize, CtrlCapability, GroupAddrCapability, DataTurnAroundDuration, MaxReadTurnAround, + MaxDataSpeed, MaxSpeedLimitation, HandOffActivityState, HandOffDelay, PendingReadMDB. + Use HAL_I3C_Tgt_Config() function to finalize the Target configuration. + + (#) Before initiate any IO operation, the application must launch an assignment of the different + Target dynamic address by using HAL_I3C_Ctrl_DynAddrAssign() in polling mode or + HAL_I3C_Ctrl_DynAddrAssign_IT() in interrupt mode. + This procedure is named Enter Dynamic Address Assignment (ENTDAA CCC command). + For the initiation of ENTDAA procedure from the controller, each target connected and powered on the I3C bus + must repond to this particular Command Common Code by sending its proper Payload (a amount of 48bits which + contain the target characteristics) + Each time a target responds to ENTDAA sequence, the application is informed through + HAL_I3C_TgtReqDynamicAddrCallback() of the reception of the target paylaod. + And then application must send a associated dynamic address through HAL_I3C_Ctrl_SetDynAddr(). + This procedure in loop automatically in hardware side until a target respond to repeated ENTDAA sequence. + The application is informed of the end of the procedure at reception of HAL_I3C_CtrlDAACpltCallback(). + Then application can easily retrieve ENTDAA payload information through HAL_I3C_Get_ENTDAA_Payload_Info() + function. + At the end of procedure, the function HAL_I3C_Ctrl_ConfigBusDevices() must be called to store in hardware + register part the target capabilities as Dynamic address, IBI support with or without additional data byte, + Controller role request support, Controller stop transfer after IBI through I3C_DeviceConfTypeDef structure. + + (#) Other action to be done, before initiate any IO operation, the application must prepare the different frame + descriptor with its associated buffer allocation in their side. + Configure the different information related to CCC transfer through I3C_CCCTypeDef structure + Configure the different information related to Private or I2C transfer through I3C_PrivateTypeDef structure + Configure the different buffer pointers and associated size needed for the driver communication + through I3C_XferTypeDef structure + The I3C_XferTypeDef structure contains different parameters about Control, Status buffer, + and Transmit and Receive buffer. + Use HAL_I3C_AddDescToFrame() function each time application add a descriptor in the frame before call + an IO operation interface + One element of the frame descriptor correspond to one frame to manage through IO operation. + + (#) To check if I3C target device is ready for communication, use the function HAL_I3C_Ctrl_IsDeviceI3C_Ready() + + (#) To check if I2C target device is ready for communication, use the function HAL_I3C_Ctrl_IsDeviceI2C_Ready() + + (#) For I3C IO operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Activate asynchronous event in controller or target mode a Common Command Code in a broadcast + or a direct communication in blocking mode using HAL_I3C_Ctrl_TransmitCCC() + (+) Transmit in controller mode a Common Command Code in a broadcast or a direct communication in blocking mode + using HAL_I3C_Ctrl_TransmitCCC() + (+) Receive in controller mode a Common Command Code in a direct communication in blocking mode + using HAL_I3C_Ctrl_ReceiveCCC() + (+) Transmit in controller mode an amount of private data in an I3C or an I2C communication in blocking mode + using HAL_I3C_Ctrl_Transmit() + (+) Receive in controller mode an amount of private data in an I3C or an I2C communication in blocking mode + using HAL_I3C_Ctrl_Receive() + (+) Transmit in target mode an amount of private data in an I3C communication in blocking mode + using HAL_I3C_Tgt_Transmit() + (+) Receive in target mode an amount of private data in an I3C communication in blocking mode + using HAL_I3C_Tgt_Receive() + (+) At the end of a transfer, the different FIFO can be flushed if necessary by using HAL_I3C_FlushAllFifo() for + flush all the FIFO, or flush individually y using HAL_I3C_FlushTxFifo(), HAL_I3C_FlushRxFifo(), + HAL_I3C_FlushControlFifo(), HAL_I3C_FlushStatusFifo(). + (+) Request a HotJoin in target mode in blocking mode using HAL_I3C_Tgt_HotJoinReq() + (+) Request a In Band Interrupt in target mode in blocking mode using HAL_I3C_Tgt_IBIReq() + (+) Request a Controller Role in target mode in blocking mode using HAL_I3C_Tgt_ControlRoleReq() + + + *** DMA and Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in controller mode a Common Command Code in a broadcast or a direct communication in non-blocking + mode using HAL_I3C_Ctrl_TransmitCCC_IT() or HAL_I3C_Ctrl_TransmitCCC_DMA() + (+) At transmission end of transfer, HAL_I3C_CtrlTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_CtrlTxCpltCallback() + (+) Receive in controller mode a Common Command Code in a direct communication in non-blocking + mode using HAL_I3C_Ctrl_ReceiveCCC_IT() or HAL_I3C_Ctrl_ReceiveCCC_DMA() + (+) At reception end of transfer, HAL_I3C_CtrlRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_CtrlRxCpltCallback() + (+) Transmit in controller mode an amount of private data in an I3C or an I2C communication in non-blocking mode + using HAL_I3C_Ctrl_Transmit_IT() or HAL_I3C_Ctrl_Transmit_DMA() + (+) At transmission end of transfer, HAL_I3C_CtrlTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_CtrlTxCpltCallback() + (+) Receive in controller mode an amount of private data in an I3C or an I2C communication in non-blocking mode + using HAL_I3C_Ctrl_Receive_IT() or HAL_I3C_Ctrl_Receive_DMA() + (+) At reception end of transfer, HAL_I3C_CtrlRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_CtrlRxCpltCallback() + (+) Transfer in multiple direction (transmit/receive) in controller mode a Common Command Code in a direct + communication or an amount of private data in an I2C or I3C communication in non-blocking mode using + HAL_I3C_Ctrl_MultipleTransfer_IT() or HAL_I3C_Ctrl_MultipleTransfer_DMA() + (+) At the end of transfer, HAL_I3C_CtrlMultipleXferCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_CtrlMultipleXferCpltCallback() + (+) Transmit in target mode an amount of private data in an I3C communication in non-blocking mode + using HAL_I3C_Tgt_Transmit_IT() or HAL_I3C_Tgt_Transmit_DMA() + (+) At transmission end of transfer, HAL_I3C_TgtTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_TgtTxCpltCallback() + (+) Receive in target mode an amount of private data in an I3C communication in non-blocking mode + using HAL_I3C_Tgt_Receive_IT() or HAL_I3C_Tgt_Receive_DMA() + (+) At reception end of transfer, HAL_I3C_TgtRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_TgtRxCpltCallback() + (+) To treat asynchronous event, HAL_I3C_ActivateNotification() or HAL_I3C_DeactivateNotification() function is + used for enable or disable one or more notification related to specific asynchronous event. + Each time one or more event detected by hardware the associated HAL_I3C_NotifyCallback() is executed + and users can add their own code by customization of function pointer HAL_I3C_NotifyCallback(). + Then application can easily retrieve some specific associated event data through HAL_I3C_GetCCCInfo() function + (+) At the end of a transfer, the different FIFO can be flushed if necessary by using HAL_I3C_FlushAllFifo() for + flush all the FIFO, or flush individually y using HAL_I3C_FlushTxFifo(), HAL_I3C_FlushRxFifo(), + HAL_I3C_FlushControlFifo(), HAL_I3C_FlushStatusFifo(). + (+) Request a HotJoin in target mode in non-blocking mode using HAL_I3C_Tgt_HotJoinReq_IT + (+) At completion, HAL_I3C_TgtHotJoinCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_TgtHotJoinCallback() + (+) Request an In Band Interrupt in target mode in non-blocking mode using HAL_I3C_Tgt_IBIReq_IT() + (+) At completion, HAL_I3C_NotifyCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_NotifyCallback() + (+) Request a Controller Role in target mode in non-blocking mode using HAL_I3C_Tgt_ControlRoleReq_IT() + (+) At completion, HAL_I3C_NotifyCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_NotifyCallback() + (+) To manage the wakeup capability, HAL_I3C_ActivateNotification() or HAL_I3C_DeactivateNotification() function + is used for enable or disable Wake Up interrupt. + At wakeup detection the associated HAL_I3C_NotifyCallback() is executed. + (+) In case of transfer Error, HAL_I3C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I3C_ErrorCallback() + (+) Abort an I3C process communication with Interrupt using HAL_I3C_Abort_IT() + (+) End of abort process, HAL_I3C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I3C_AbortCpltCallback() + + + *** I3C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I3C HAL driver. + + (+) __HAL_I3C_ENABLE: Enable the I3C peripheral + (+) __HAL_I3C_DISABLE: Disable the I3C peripheral + (+) __HAL_I3C_RESET_HANDLE_STATE: Reset the I3C handle state + (+) __HAL_I3C_GET_FLAG: Check whether the specified I3C flag is set or not + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I3C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I3C_RegisterCallback() or HAL_I3C_RegisterNotifyCallback() + or HAL_I3C_RegisterTgtReqDynamicAddrCallback() or HAL_I3C_RegisterTgtHotJoinCallback() + to register an interrupt callback. + [..] + Function HAL_I3C_RegisterCallback() allows to register following callbacks: + (+) CtrlTxCpltCallback : callback for Controller transmission CCC, I3C private or I2C end of transfer. + (+) CtrlRxCpltCallback : callback for Controller reception CCC, I3C private or I2C end of transfer. + (+) CtrlMultipleXferCpltCallback : callback for Controller multiple Direct CCC, I3C private or I2C + end of transfer. + (+) CtrlDAACpltCallback : callback for Controller Enter Dynamic Address Assignment end of transfer. + (+) TgtTxCpltCallback : callback for Target transmission I3C private end of transfer. + (+) TgtRxCpltCallback : callback for Target reception I3C private end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback NotifyCallback + use dedicated register callbacks : HAL_I3C_RegisterNotifyCallback(). + [..] + For specific callback TgtReqDynamicAddrCallback + use dedicated register callbacks : HAL_I3C_RegisterTgtReqDynamicAddrCallback(). + [..] + For specific callback TgtHotJoinCallback + use dedicated register callbacks : HAL_I3C_RegisterTgtHotJoinCallback(). + [..] + Use function HAL_I3C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I3C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) CtrlTxCpltCallback : callback for Controller transmission CCC, I3C private or I2C end of transfer. + (+) CtrlRxCpltCallback : callback for Controller reception CCC, I3C private or I2C end of transfer. + (+) CtrlMultipleXferCpltCallback : callback for Controller multiple Direct CCC, I3C private or I2C + end of transfer. + (+) CtrlDAACpltCallback : callback for Controller Enter Dynamic Address Assignment end of transfer. + (+) TgtTxCpltCallback : callback for Target transmission I3C private end of transfer. + (+) TgtRxCpltCallback : callback for Target reception I3C private end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + (+) NotifyCallback : callback for Controller and Target notification process. + (+) TgtReqDynamicAddrCallback : callback for controller application + when a target sent its payload to the controller during Dynamic Address Assignment process. + (+) TgtHotJoinCallback : callback for Target Hotjoin completion process. + [..] + By default, after the HAL_I3C_Init() and when the state is HAL_I3C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I3C_CtrlTxCpltCallback(), HAL_I3C_CtrlRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I3C_Init()/ HAL_I3C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I3C_Init()/ HAL_I3C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I3C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I3C_STATE_READY or HAL_I3C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I3C_RegisterCallback() before calling HAL_I3C_DeInit() + or HAL_I3C_Init() function. + [..] + When the compilation flag USE_HAL_I3C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I3C HAL driver header file for more useful macros + + @endverbatim + ********************************************************************************************************************** + */ + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup I3C I3C + * @brief I3C HAL module driver + * @{ + */ + +#ifdef HAL_I3C_MODULE_ENABLED + +/* Private typedef ---------------------------------------------------------------------------------------------------*/ +/* Private define ----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Private_Define I3C Private Define + * @{ + */ + +/* Private define to centralize the enable/disable of Interrupts */ +#define I3C_XFER_LISTEN_IT (0x00000001U) +#define I3C_XFER_TARGET_TX_IT (0x00000002U) +#define I3C_XFER_TARGET_RX_IT (0x00000004U) +#define I3C_XFER_DMA (0x00000008U) +#define I3C_XFER_TARGET_CTRLROLE (0x00000010U) +#define I3C_XFER_TARGET_HOTJOIN (0x00000020U) +#define I3C_XFER_TARGET_IBI (0x00000040U) +#define I3C_XFER_CONTROLLER_TX_IT (0x00000080U) +#define I3C_XFER_CONTROLLER_RX_IT (0x00000100U) +#define I3C_XFER_CONTROLLER_RX_CCC_IT (0x00000400U) +#define I3C_XFER_CONTROLLER_DAA_IT (0x00001000U) + +/* Private defines for control buffer prior preparation */ +#define I3C_OPERATION_TYPE_MASK (0x78000000U) +#define I3C_RESTART_STOP_MASK (0x80000000U) +#define I3C_ARBITRATION_HEADER_MASK (0x00000004U) +#define I3C_DEFINE_BYTE_MASK (0x00000001U) + +/* Private define for CCC command */ +#define I3C_BROADCAST_RSTDAA (0x00000006U) +#define I3C_BROADCAST_ENTDAA (0x00000007U) + +/* Private define to split ENTDAA payload */ +#define I3C_DCR_IN_PAYLOAD_SHIFT 56 +#define I3C_PID_IN_PAYLOAD_MASK 0xFFFFFFFFFFFFU + +/* Private define to split PID */ +/* Bits[47:33]: MIPI Manufacturer ID */ +#define I3C_MIPIMID_PID_SHIFT 33 +#define I3C_MIPIMID_PID_MASK 0x7FFFU + +/* Bit[32]: Provisioned ID Type Selector */ +#define I3C_IDTSEL_PID_SHIFT 32 +#define I3C_IDTSEL_PID_MASK 0x01U + +/* Bits[31:16]: Part ID */ +#define I3C_PART_ID_PID_SHIFT 16 +#define I3C_PART_ID_PID_MASK 0xFFFFU + +/* Bits[15:12]: MIPI Instance ID */ +#define I3C_MIPIID_PID_SHIFT 12 +#define I3C_MIPIID_PID_MASK 0xFU +/** + * @} + */ + +/* Private macro -----------------------------------------------------------------------------------------------------*/ + +/** @brief Get Provisioned ID in payload (64bits) receive during ENTDAA procedure. + * @param __PAYLOAD__ specifies the Device Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFFFFFF. + * @retval The value of PID Return value between Min_Data=0x00 and Max_Data=0xFFFFFFFFFFFF. + */ +#define I3C_GET_PID(__PAYLOAD__) ((uint64_t)(__PAYLOAD__) & I3C_PID_IN_PAYLOAD_MASK) + +/** @brief Get MIPI Manufacturer ID in PID (48bits). + * @param __PID__ specifies the Provisioned ID retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFF. + * @retval The value of MIPI ID Return value between Min_Data=0x00 and Max_Data=0x7FFF. + */ +#define I3C_GET_MIPIMID(__PID__) ((uint16_t)((uint64_t)(__PID__) >> I3C_MIPIMID_PID_SHIFT) & \ + I3C_MIPIMID_PID_MASK) + +/** @brief Get Type Selector in PID (48bits). + * @param __PID__ specifies the Provisioned ID retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFF. + * @retval The value of Type Selector Return 0 or 1. + */ +#define I3C_GET_IDTSEL(__PID__) ((uint8_t)((uint64_t)(__PID__) >> I3C_IDTSEL_PID_SHIFT) & \ + I3C_IDTSEL_PID_MASK) + +/** @brief Get Part ID in PID (48bits). + * @param __PID__ specifies the Provisioned ID retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFF. + * @retval The value of Part ID Return value between Min_Data=0x00 and Max_Data=0xFFFF. + */ +#define I3C_GET_PART_ID(__PID__) ((uint16_t)((uint64_t)(__PID__) >> I3C_PART_ID_PID_SHIFT) & \ + I3C_PART_ID_PID_MASK) + +/** @brief Get Instance ID in PID (48bits). + * @param __PID__ specifies the Provisioned ID retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFF. + * @retval The value of Instance ID Return value between Min_Data=0x00 and Max_Data=0xF. + */ +#define I3C_GET_MIPIID(__PID__) ((uint8_t)((uint64_t)(__PID__) >> I3C_MIPIID_PID_SHIFT) & \ + I3C_MIPIID_PID_MASK) + +/** @brief Get Device Characterics in payload (64bits) receive during ENTDAA procedure. + * @param __PAYLOAD__ specifies the Device Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00(uint64_t) and Max_Data=0xFFFFFFFFFFFFFFFFFF. + * @retval The value of BCR Return value between Min_Data=0x00 and Max_Data=0xFF. + */ +#define I3C_GET_DCR(__PAYLOAD__) (((uint32_t)((uint64_t)(__PAYLOAD__) >> I3C_DCR_IN_PAYLOAD_SHIFT)) & \ + I3C_DCR_DCR) + +/** @brief Get Advanced Capabilities. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The value of advanced capabilities: + * ENABLE: supports optional advanced capabilities. + * DISABLE: not supports optional advanced capabilities. + */ +#define I3C_GET_ADVANCED_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR5_Msk) >> \ + I3C_BCR_BCR5_Pos) == 1U) ? ENABLE : DISABLE) + +/** @brief Get virtual target support. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The value of offline capable: + * ENABLE: is a Virtual Target + * DISABLE: is not a Virtual Target + */ +#define I3C_GET_VIRTUAL_TGT(__BCR__) (((((__BCR__) & I3C_BCR_BCR4_Msk) >> \ + I3C_BCR_BCR4_Pos) == 1U) ? ENABLE : DISABLE) + +/** @brief Get offline capable. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The value of offline capable + * ENABLE: Device will not always respond to I3C Bus commands + * DISABLE: Device will always respond to I3C Bus commands + */ +#define I3C_GET_OFFLINE_CAPABLE(__BCR__) (((((__BCR__) & I3C_BCR_BCR3_Msk) >> \ + I3C_BCR_BCR3_Pos) == 1U) ? ENABLE : DISABLE) + +/** @brief Get Max data speed limitation. + * @param __BCR__ specifies the Bus Characteristics capabilities retrieve during ENTDAA procedure. + * This parameter must be a number between Min_Data=0x00 and Max_Data=0xFF. + * @retval The value of offline capable: + * ENABLE: Limitation + * DISABLE: No Limitation + */ +#define I3C_GET_MAX_DATA_SPEED_LIMIT(__BCR__) (((((__BCR__) & I3C_BCR_BCR0_Msk) >> \ + I3C_BCR_BCR0_Pos) == 1U) ? ENABLE : DISABLE) + +/** @brief Change uint32_t variable form big endian to little endian. + * @param __DATA__ .uint32_t variable in big endian. + * This parameter must be a number between Min_Data=0x00(uint32_t) and Max_Data=0xFFFFFFFF. + * @retval uint32_t variable in little endian. + */ +#define I3C_BIG_TO_LITTLE_ENDIAN(__DATA__) ((uint32_t)((((__DATA__) & 0xff000000U) >> 24) | \ + (((__DATA__) & 0x00ff0000U) >> 8) | \ + (((__DATA__) & 0x0000ff00U) << 8) | \ + (((__DATA__) & 0x000000ffU) << 24))) + +/* Private variables -------------------------------------------------------------------------------------------------*/ +/** @addtogroup I3C_Private_Variables + * @{ + */ +/* Structure containing address device and message type used for the private function I3C_Ctrl_IsDevice_Ready() */ +typedef struct +{ + uint8_t Address; /* Dynamic or Static target Address */ + uint32_t MessageType; /* Message Type */ + +} I3C_DeviceTypeDef; +/** + * @} + */ + +/* Private function prototypes ---------------------------------------------------------------------------------------*/ +/** @addtogroup I3C_Private_Functions + * @{ + */ +static HAL_StatusTypeDef I3C_Tgt_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Tgt_Tx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Tgt_Rx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +#if defined(HAL_DMA_MODULE_ENABLED) +static HAL_StatusTypeDef I3C_Tgt_Tx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Tgt_Rx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +#endif /* HAL_DMA_MODULE_ENABLED */ +static HAL_StatusTypeDef I3C_Tgt_HotJoin_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Tgt_CtrlRole_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Tgt_IBI_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Tx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Rx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Tx_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Rx_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +#if defined(HAL_DMA_MODULE_ENABLED) +static HAL_StatusTypeDef I3C_Ctrl_Tx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Rx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +#endif /* HAL_DMA_MODULE_ENABLED */ +static HAL_StatusTypeDef I3C_Ctrl_DAA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); +static HAL_StatusTypeDef I3C_Abort_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks); + +static HAL_StatusTypeDef I3C_WaitOnDAAUntilTimeout(I3C_HandleTypeDef *hi3c, uint32_t timeout, uint32_t tickstart); +static HAL_StatusTypeDef I3C_WaitOnFlagUntilTimeout(I3C_HandleTypeDef *hi3c, uint32_t flag, FlagStatus flagstatus, + uint32_t timeout, uint32_t tickstart); +static void I3C_TransmitByteTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_TransmitWordTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_ReceiveByteTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_ReceiveWordTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_ControlDataTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_ErrorTreatment(I3C_HandleTypeDef *hi3c); +static void I3C_GetErrorSources(I3C_HandleTypeDef *hi3c); +static void I3C_StateUpdate(I3C_HandleTypeDef *hi3c); +#if defined(HAL_DMA_MODULE_ENABLED) +static void I3C_DMAAbort(DMA_HandleTypeDef *hdma); +static void I3C_DMAControlTransmitCplt(DMA_HandleTypeDef *hdma); +static void I3C_DMADataTransmitCplt(DMA_HandleTypeDef *hdma); +static void I3C_DMADataReceiveCplt(DMA_HandleTypeDef *hdma); +static void I3C_DMAError(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void I3C_Enable_IRQ(I3C_HandleTypeDef *hi3c, uint32_t InterruptRequest); +static void I3C_Disable_IRQ(I3C_HandleTypeDef *hi3c, uint32_t InterruptRequest); +static HAL_StatusTypeDef I3C_Xfer_PriorPreparation(I3C_HandleTypeDef *hi3c, uint8_t counter, uint32_t option); +static uint32_t I3C_FillTxBuffer_CCC(I3C_HandleTypeDef *hi3c, + uint32_t indexDesc, + uint32_t txSize, + uint32_t txCurrentIndex); +static uint32_t I3C_FillTxBuffer_Private(I3C_HandleTypeDef *hi3c, + uint32_t indexDesc, + uint32_t txSize, + uint32_t txCurrentIndex); +static HAL_StatusTypeDef I3C_ControlBuffer_PriorPreparation(I3C_HandleTypeDef *hi3c, + uint8_t counter, + uint32_t option); +static HAL_StatusTypeDef I3C_Ctrl_IsDevice_Ready(I3C_HandleTypeDef *hi3c, + const I3C_DeviceTypeDef *pDevice, + uint32_t trials, + uint32_t timeout); +static void I3C_TreatErrorCallback(I3C_HandleTypeDef *hi3c); +/** + * @} + */ + +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @addtogroup I3C_Exported_Functions I3C Exported Functions + * @{ + */ + +/** @defgroup I3C_Exported_Functions_Group1 Initialization and de-initialization functions. + * @brief I3C initialization and de-initialization functions + * +@verbatim + ======================================================================================================================= + ##### Initialization and de-initialization functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to initialize and deinitialize the I3Cx peripheral: + + (+) Users must implement HAL_I3C_MspInit() function in which they configure all related peripherals + resources (APB and Kernel CLOCK, GPIO, DMA, IT and NVIC). + + (+) Call the function HAL_I3C_Init() to configure the bus characteristic depends on the device mode + with the selected configuration below: + + (++) Controller mode, Serial source clock wave form configuration: + (+++) SCL push pull low duration + (+++) SCL I3C high duration + (+++) SCL open drain low duration + (+++) SCL I2C high duration + + (++) Controller mode, Bus timing configuration: + (+++) SDA hold time + (+++) Wait time + (+++) Bus free duration + (+++) Bus available duration + + (++) Target mode, Bus timing configuration: + (+++) Bus available duration + + (+) Call the function HAL_I3C_DeInit() to restore the default configuration of the selected I3Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I3C instance by activating the low-level hardware and configuring the bus + * characteristic according to the specified parameters in the I3C_InitTypeDef. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Init(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t waveform_value; + uint32_t timing_value; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Init the I3C Callback settings */ + /* Legacy weak CtrlTxCpltCallback */ + hi3c->CtrlTxCpltCallback = HAL_I3C_CtrlTxCpltCallback; + /* Legacy weak CtrlRxCpltCallback */ + hi3c->CtrlRxCpltCallback = HAL_I3C_CtrlRxCpltCallback; + /* Legacy weak CtrlMultipleXferCpltCallback */ + hi3c->CtrlMultipleXferCpltCallback = HAL_I3C_CtrlMultipleXferCpltCallback; + /* Legacy weak CtrlDAACpltCallback */ + hi3c->CtrlDAACpltCallback = HAL_I3C_CtrlDAACpltCallback; + /* Legacy weak TgtReqDynamicAddrCallback */ + hi3c->TgtReqDynamicAddrCallback = HAL_I3C_TgtReqDynamicAddrCallback; + /* Legacy weak TgtTxCpltCallback */ + hi3c->TgtTxCpltCallback = HAL_I3C_TgtTxCpltCallback; + /* Legacy weak TgtRxCpltCallback */ + hi3c->TgtRxCpltCallback = HAL_I3C_TgtRxCpltCallback; + /* Legacy weak TgtHotJoinCallback */ + hi3c->TgtHotJoinCallback = HAL_I3C_TgtHotJoinCallback; + /* Legacy weak NotifyCallback */ + hi3c->NotifyCallback = HAL_I3C_NotifyCallback; + /* Legacy weak ErrorCallback */ + hi3c->ErrorCallback = HAL_I3C_ErrorCallback; + /* Legacy weak AbortCpltCallback */ + hi3c->AbortCpltCallback = HAL_I3C_AbortCpltCallback; + + /* Check on the MSP init callback */ + if (hi3c->MspInitCallback == NULL) + { + /* Legacy weak MspInit */ + hi3c->MspInitCallback = HAL_I3C_MspInit; + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi3c->MspInitCallback(hi3c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I3C_MspInit(hi3c); + +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + } + + /* Update the I3C state to busy */ + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + + /* Check on the I3C mode: initialization depends on the mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Check the parameters */ + assert_param(IS_I3C_SDAHOLDTIME_VALUE(hi3c->Init.CtrlBusCharacteristic.SDAHoldTime)); + assert_param(IS_I3C_WAITTIME_VALUE(hi3c->Init.CtrlBusCharacteristic.WaitTime)); + + /* Set Controller mode */ + LL_I3C_SetMode(hi3c->Instance, LL_I3C_MODE_CONTROLLER); + + /*----------------- SCL signal waveform configuration : I3C timing register 0 (I3C_TIMINGR0) ------------------ */ + /* Set the controller SCL waveform */ + waveform_value = ((uint32_t)hi3c->Init.CtrlBusCharacteristic.SCLPPLowDuration | + ((uint32_t)hi3c->Init.CtrlBusCharacteristic.SCLI3CHighDuration << I3C_TIMINGR0_SCLH_I3C_Pos) | + ((uint32_t)hi3c->Init.CtrlBusCharacteristic.SCLODLowDuration << I3C_TIMINGR0_SCLL_OD_Pos) | + ((uint32_t)hi3c->Init.CtrlBusCharacteristic.SCLI2CHighDuration << I3C_TIMINGR0_SCLH_I2C_Pos)); + + LL_I3C_ConfigClockWaveForm(hi3c->Instance, waveform_value); + + /*------------------ Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ------------------------------ */ + /* Set SDA hold time, activity state, bus free duration and bus available duration */ + timing_value = ((uint32_t)hi3c->Init.CtrlBusCharacteristic.SDAHoldTime | + (uint32_t)hi3c->Init.CtrlBusCharacteristic.WaitTime | + ((uint32_t)hi3c->Init.CtrlBusCharacteristic.BusFreeDuration << I3C_TIMINGR1_FREE_Pos) | + (uint32_t)hi3c->Init.CtrlBusCharacteristic.BusIdleDuration); + + LL_I3C_SetCtrlBusCharacteristic(hi3c->Instance, timing_value); + } + else + { + /* Set target mode */ + LL_I3C_SetMode(hi3c->Instance, LL_I3C_MODE_TARGET); + + /*------------------ Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ------------------------------ */ + /* Set the number of kernel clocks cycles for the bus available condition time */ + LL_I3C_SetAvalTiming(hi3c->Instance, hi3c->Init.TgtBusCharacteristic.BusAvailableDuration); + } + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(hi3c->Instance); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update I3C state */ + hi3c->State = HAL_I3C_STATE_READY; + hi3c->PreviousState = HAL_I3C_STATE_READY; + } + + return status; +} + +/** + * @brief DeInitialize the I3C peripheral. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_DeInit(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + + /* Update the I3C state to busy */ + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Check on the MSP init callback */ + if (hi3c->MspDeInitCallback == NULL) + { + /* Legacy weak MspDeInit */ + hi3c->MspDeInitCallback = HAL_I3C_MspDeInit; + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi3c->MspDeInitCallback(hi3c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I3C_MspDeInit(hi3c); + +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + + /* Update the I3C Error code, state and mode */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_RESET; + hi3c->PreviousState = HAL_I3C_STATE_RESET; + hi3c->Mode = HAL_I3C_MODE_NONE; + } + + return status; +} + +/** + * @brief Initialize the I3C MSP. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_MspInit(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I3C_MspInit could be implemented in the user file */ +} + +/** + * @brief DeInitialize the I3C MSP. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_MspDeInit(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I3C_MspDeInit could be implemented in the user file */ +} +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group2 Interrupt and callback functions. + * @brief I3C interrupt and callback functions. + * +@verbatim + ======================================================================================================================= + ##### Interrupt and callback functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to manage callbacks and interrupts request: + + (+) Register/Unregister callback function: + (++) Call the function HAL_I3C_RegisterCallback() to register an I3C user callback. + (++) Call the function HAL_I3C_RegisterNotifyCallback() to register an I3C user notification callback. + (++) Call the function HAL_I3C_RegisterDynamicAddrCallback() to register an I3C user address callback. + (++) Call the function HAL_I3C_RegisterHotJoinCallback() to register an I3C user hot join callback. + (++) Call the function HAL_I3C_UnRegisterCallback() to unregister an I3C user callback. + + (+) Notification management function: + (++) Call the function HAL_I3C_ActivateNotification() to activate the I3C notifications. + (++) Call the function HAL_I3C_DeactivateNotification() to deactivate the I3C notifications. + + (+) Controller callback functions: + (++) Users must implement HAL_I3C_CtrlTxCpltCallback() function when the transmission of private data or + Tx CCC transfer is completed. + (++) Users must implement HAL_I3C_CtrlRxCpltCallback() function when the reception of private data or + Rx CCC transfer is completed. + (++) Users must implement HAL_I3C_CtrlMultipleXferCpltCallback() function when the multiple + transfer of CCC, I3C private or I2C transfer is completed. + (++) Users must implement HAL_I3C_CtrlDAACpltCallback() function when Dynamic Address Assignment + procedure is completed. + (++) Users must implement HAL_I3C_TgtReqDynamicAddrCallback() function in the controller application + when a target sent its payload to the controller during Dynamic Address Assignment procedure. + + (+) Target callback functions: + (++) Users must implement HAL_I3C_TgtTxCpltCallback() function when the transmission of private + data is completed. + (++) Users must implement HAL_I3C_TgtRxCpltCallback() function when the reception of private + data is completed. + (++) Users must implement HAL_I3C_TgtHotJoinCallback() function when a target hot join process + is completed. + + (+) Common callback functions: + (++) Users must implement HAL_I3C_NotifyCallback() function when the device receives + an asynchronous event like IBI, a Hot-join, CCC command for target... + (++) Users must implement HAL_I3C_AbortCpltCallback() function when an abort process is completed. + (++) Users must implement HAL_I3C_ErrorCallback() function when an error is occurred. + + (+) Interrupt and event function: + (++) Call the function HAL_I3C_ER_IRQHandler() in the ISR file to handle I3C error interrupts request. + (++) Call the function HAL_I3C_EV_IRQHandler() in the ISR file to handle I3C event interrupts request. +@endverbatim + * @{ + */ + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User I3C Callback to be used instead of the weak predefined callback. + * @note The HAL_I3C_RegisterCallback() may be called before HAL_I3C_Init() in HAL_I3C_STATE_RESET + * to register callbacks for HAL_I3C_MSPINIT_CB_ID and HAL_I3C_MSPDEINIT_CB_ID + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param callbackID : [IN] ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_I3C_CTRL_TX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_RX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_MULTIPLE_XFER_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_DAA_COMPLETE_CB_ID + * @arg @ref HAL_I3C_TGT_TX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_TGT_RX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_ERROR_CB_ID + * @arg @ref HAL_I3C_ABORT_CB_ID + * @arg @ref HAL_I3C_MSPINIT_CB_ID + * @arg @ref HAL_I3C_MSPDEINIT_CB_ID + * @param pCallback : [IN] Pointer to the Callback function. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_RegisterCallback(I3C_HandleTypeDef *hi3c, + HAL_I3C_CallbackIDTypeDef callbackID, + pI3C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the user callback allocation */ + if (pCallback == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else if (HAL_I3C_STATE_READY == hi3c->State) + { + switch (callbackID) + { + case HAL_I3C_CTRL_TX_COMPLETE_CB_ID : + hi3c->CtrlTxCpltCallback = pCallback; + break; + + case HAL_I3C_CTRL_RX_COMPLETE_CB_ID : + hi3c->CtrlRxCpltCallback = pCallback; + break; + + case HAL_I3C_CTRL_MULTIPLE_XFER_COMPLETE_CB_ID : + hi3c->CtrlMultipleXferCpltCallback = pCallback; + break; + + case HAL_I3C_CTRL_DAA_COMPLETE_CB_ID : + hi3c->CtrlDAACpltCallback = pCallback; + break; + + case HAL_I3C_TGT_TX_COMPLETE_CB_ID : + hi3c->TgtTxCpltCallback = pCallback; + break; + + case HAL_I3C_TGT_RX_COMPLETE_CB_ID : + hi3c->TgtRxCpltCallback = pCallback; + break; + + case HAL_I3C_ERROR_CB_ID : + hi3c->ErrorCallback = pCallback; + break; + + case HAL_I3C_ABORT_CB_ID : + hi3c->AbortCpltCallback = pCallback; + break; + + case HAL_I3C_MSPINIT_CB_ID : + hi3c->MspInitCallback = pCallback; + break; + + case HAL_I3C_MSPDEINIT_CB_ID : + hi3c->MspDeInitCallback = pCallback; + break; + + default : + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (HAL_I3C_STATE_RESET == hi3c->State) + { + switch (callbackID) + { + case HAL_I3C_MSPINIT_CB_ID : + hi3c->MspInitCallback = pCallback; + break; + + case HAL_I3C_MSPDEINIT_CB_ID : + hi3c->MspDeInitCallback = pCallback; + break; + + default : + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Register a User I3C Notify Callback to be used instead of the weak predefined callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pNotifyCallback : [IN] Pointer to the Callback function. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_RegisterNotifyCallback(I3C_HandleTypeDef *hi3c, pI3C_NotifyCallbackTypeDef pNotifyCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the user callback allocation */ + if (pNotifyCallback == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else if (HAL_I3C_STATE_READY == hi3c->State) + { + hi3c->NotifyCallback = pNotifyCallback; + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Register a User I3C dynamic address Callback to be used instead of the weak predefined callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pTgtReqAddrCallback : [IN] Pointer to the Callback function. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_RegisterTgtReqDynamicAddrCallback(I3C_HandleTypeDef *hi3c, + pI3C_TgtReqDynamicAddrCallbackTypeDef pTgtReqAddrCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the user callback allocation */ + if (pTgtReqAddrCallback == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else if (HAL_I3C_STATE_READY == hi3c->State) + { + hi3c->TgtReqDynamicAddrCallback = pTgtReqAddrCallback; + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Register a User I3C hot join Callback to be used instead of the weak predefined callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pTgtHotJoinCallback : [IN] Pointer to the Callback function. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_RegisterTgtHotJoinCallback(I3C_HandleTypeDef *hi3c, + pI3C_TgtHotJoinCallbackTypeDef pTgtHotJoinCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the user callback allocation */ + if (pTgtHotJoinCallback == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else if (HAL_I3C_STATE_READY == hi3c->State) + { + hi3c->TgtHotJoinCallback = pTgtHotJoinCallback; + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Unregister a user I3C Callback. + * The I3C callback is redirected to the weak predefined callback + * @note The HAL_I3C_UnRegisterCallback() may be called before HAL_I3C_Init() in HAL_I3C_STATE_RESET + * to un-register callbacks for HAL_I3C_MSPINIT_CB_ID and HAL_I3C_MSPDEINIT_CB_ID + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param callbackID : [IN] ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_I3C_CTRL_TX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_RX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_MULTIPLE_XFER_COMPLETE_CB_ID + * @arg @ref HAL_I3C_CTRL_DAA_COMPLETE_CB_ID + * @arg @ref HAL_I3C_TGT_REQ_DYNAMIC_ADDR_CB_ID + * @arg @ref HAL_I3C_TGT_TX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_TGT_RX_COMPLETE_CB_ID + * @arg @ref HAL_I3C_TGT_HOTJOIN_CB_ID + * @arg @ref HAL_I3C_NOTIFY_CB_ID + * @arg @ref HAL_I3C_ERROR_CB_ID + * @arg @ref HAL_I3C_ABORT_CB_ID + * @arg @ref HAL_I3C_MSPINIT_CB_ID + * @arg @ref HAL_I3C_MSPDEINIT_CB_ID + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_UnRegisterCallback(I3C_HandleTypeDef *hi3c, HAL_I3C_CallbackIDTypeDef callbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + if (HAL_I3C_STATE_READY == hi3c->State) + { + switch (callbackID) + { + case HAL_I3C_CTRL_TX_COMPLETE_CB_ID : + /* Legacy weak CtrlTxCpltCallback */ + hi3c->CtrlTxCpltCallback = HAL_I3C_CtrlTxCpltCallback; + break; + + case HAL_I3C_CTRL_RX_COMPLETE_CB_ID : + /* Legacy weak CtrlRxCpltCallback */ + hi3c->CtrlRxCpltCallback = HAL_I3C_CtrlRxCpltCallback; + break; + + case HAL_I3C_CTRL_MULTIPLE_XFER_COMPLETE_CB_ID : + /* Legacy weak CtrlMultipleXferCpltCallback */ + hi3c->CtrlMultipleXferCpltCallback = HAL_I3C_CtrlMultipleXferCpltCallback; + break; + + case HAL_I3C_CTRL_DAA_COMPLETE_CB_ID : + /* Legacy weak CtrlDAACpltCallback */ + hi3c->CtrlDAACpltCallback = HAL_I3C_CtrlDAACpltCallback; + break; + + case HAL_I3C_TGT_REQ_DYNAMIC_ADDR_CB_ID : + /*Legacy weak TgtReqDynamicAddrCallback */ + hi3c->TgtReqDynamicAddrCallback = HAL_I3C_TgtReqDynamicAddrCallback; + break; + + case HAL_I3C_TGT_TX_COMPLETE_CB_ID : + /* Legacy weak TgtTxCpltCallback */ + hi3c->TgtTxCpltCallback = HAL_I3C_TgtTxCpltCallback; + break; + + case HAL_I3C_TGT_RX_COMPLETE_CB_ID : + /* Legacy weak TgtRxCpltCallback */ + hi3c->TgtRxCpltCallback = HAL_I3C_TgtRxCpltCallback; + break; + + case HAL_I3C_TGT_HOTJOIN_CB_ID : + /* Legacy weak TgtHotJoinCallback */ + hi3c->TgtHotJoinCallback = HAL_I3C_TgtHotJoinCallback; + break; + + case HAL_I3C_NOTIFY_CB_ID : + /* Legacy weak NotifyCallback */ + hi3c->NotifyCallback = HAL_I3C_NotifyCallback; + break; + + case HAL_I3C_ERROR_CB_ID : + /* Legacy weak ErrorCallback */ + hi3c->ErrorCallback = HAL_I3C_ErrorCallback; + break; + + case HAL_I3C_ABORT_CB_ID : + /* Legacy weak AbortCpltCallback */ + hi3c->AbortCpltCallback = HAL_I3C_AbortCpltCallback; + break; + + case HAL_I3C_MSPINIT_CB_ID : + /* Legacy weak MspInit */ + hi3c->MspInitCallback = HAL_I3C_MspInit; + break; + + case HAL_I3C_MSPDEINIT_CB_ID : + /* Legacy weak MspDeInit */ + hi3c->MspDeInitCallback = HAL_I3C_MspDeInit; + break; + + default : + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (HAL_I3C_STATE_RESET == hi3c->State) + { + switch (callbackID) + { + case HAL_I3C_MSPINIT_CB_ID : + /* Legacy weak MspInit */ + hi3c->MspInitCallback = HAL_I3C_MspInit; + break; + + case HAL_I3C_MSPDEINIT_CB_ID : + /* Legacy weak MspDeInit */ + hi3c->MspDeInitCallback = HAL_I3C_MspDeInit; + break; + + default : + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + return status; +} +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + +/** + * @brief This function permits to activate the I3C notifications. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pXferData : [IN/OUT] Pointer to an I3C_XferTypeDef structure that contains the reception buffer to + * retrieve data during broadcast CCC DEFTGTS and DEFGRPA when Target mode only. + * @param interruptMask : [IN] Parameter indicates which interrupts will be enabled. + * This parameter can be any combination of @arg I3C_TARGET_INTERRUPT when + * the I3C is in target mode or a combination of @arg I3C_CONTROLLER_INTERRUPT + * when it is in controller mode. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_ActivateNotification(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, + uint32_t interruptMask) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + assert_param(IS_I3C_INTERRUPTMASK(hi3c->Mode, interruptMask)); + + /* Check the I3C state and mode */ + if ((hi3c->State == HAL_I3C_STATE_RESET) || + ((hi3c->Mode != HAL_I3C_MODE_CONTROLLER) && (hi3c->Mode != HAL_I3C_MODE_TARGET))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Check the I3C mode */ + else if ((hi3c->Mode == HAL_I3C_MODE_TARGET) && + ((interruptMask & (HAL_I3C_IT_DEFIE | HAL_I3C_IT_GRPIE)) != 0U) && + (pXferData == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Check the I3C mode */ + if (hi3c->Mode == HAL_I3C_MODE_TARGET) + { + if ((interruptMask & (HAL_I3C_IT_DEFIE | HAL_I3C_IT_GRPIE)) != 0U) + { + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + } + /* Store the target event treatment function */ + hi3c->XferISR = I3C_Tgt_Event_ISR; + } + else + { + /* Store the controller event treatment function */ + hi3c->XferISR = I3C_Ctrl_Event_ISR; + } + + /* Update handle parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_LISTEN; + hi3c->PreviousState = HAL_I3C_STATE_LISTEN; + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + /* Enable selected notifications */ + I3C_Enable_IRQ(hi3c, (interruptMask | I3C_XFER_LISTEN_IT)); + } + } + + return status; +} + +/** + * @brief This function permits to deactivate the I3C notifications. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param interruptMask : [IN] Parameter indicates which interrupts will be disabled. + * This parameter can be any combination of @arg I3C_TARGET_INTERRUPT when + * the I3C is in target mode or a combination of @arg I3C_CONTROLLER_INTERRUPT + * when it is in controller mode. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_DeactivateNotification(I3C_HandleTypeDef *hi3c, uint32_t interruptMask) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance parameter */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + + /* Check on the State */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Disable selected notifications */ + I3C_Disable_IRQ(hi3c, (interruptMask | I3C_XFER_LISTEN_IT)); + + if (READ_REG(hi3c->Instance->IER) == 0U) + { + /* Update the XferISR pointer */ + hi3c->XferISR = NULL; + + /* Update I3C state */ + hi3c->State = HAL_I3C_STATE_READY; + hi3c->PreviousState = HAL_I3C_STATE_READY; + } + } + } + + return status; +} + +/** + * @brief Controller Transmission Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_CtrlTxCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_CtrlTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Controller Reception Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_CtrlRxCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_CtrlRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Controller multiple Direct CCC Command, I3C private or I2C transfer Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_CtrlMultipleXferCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_CtrlMultipleXferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Controller dynamic address assignment Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_CtrlDAACpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_CtrlDAACpltCallback could be implemented in the user file + */ +} + +/** + * @brief Target Request Dynamic Address callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param targetPayload : [IN] Parameter indicates the target payload. + * @retval None + */ +__weak void HAL_I3C_TgtReqDynamicAddrCallback(I3C_HandleTypeDef *hi3c, uint64_t targetPayload) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + UNUSED(targetPayload); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_TgtReqDynamicAddrCallback could be implemented in the user file + */ +} + +/** + * @brief Target Transmission Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_TgtTxCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_TgtTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Target Reception Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_TgtRxCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_TgtRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Target Hot join process Complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param dynamicAddress : [IN] The returned dynamic address value after the hot join process. + * @retval None + */ +__weak void HAL_I3C_TgtHotJoinCallback(I3C_HandleTypeDef *hi3c, uint8_t dynamicAddress) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + UNUSED(dynamicAddress); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_TgtHotJoinCallback could be implemented in the user file + */ +} + +/** + * @brief Target/Controller Notification event callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param eventId : [IN] Parameter indicates which notification is signaled. + * It can be a combination value of @ref HAL_I3C_Notification_ID_definition. + * @retval None + */ +__weak void HAL_I3C_NotifyCallback(I3C_HandleTypeDef *hi3c, uint32_t eventId) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + UNUSED(eventId); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_NotifyCallback could be implemented in the user file + */ +} + +/** + * @brief Abort complete callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_AbortCpltCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +__weak void HAL_I3C_ErrorCallback(I3C_HandleTypeDef *hi3c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi3c); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I3C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief This function handles I3C error interrupt request. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +void HAL_I3C_ER_IRQHandler(I3C_HandleTypeDef *hi3c) +{ + uint32_t it_flag = READ_REG(hi3c->Instance->EVR); + uint32_t it_source = READ_REG(hi3c->Instance->IER); + + /* Check on the error interrupt flag and source */ + if ((I3C_CHECK_FLAG(it_flag, HAL_I3C_FLAG_ERRF) != RESET) && + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_ERRIE) != RESET)) + { + /* Clear the error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + if (hi3c->State != HAL_I3C_STATE_ABORT) + { + /* Get error sources */ + I3C_GetErrorSources(hi3c); + } + + /* Errors treatment */ + I3C_ErrorTreatment(hi3c); + } +} + +/** + * @brief This function handles I3C event interrupt request. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval None + */ +void HAL_I3C_EV_IRQHandler(I3C_HandleTypeDef *hi3c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + uint32_t it_flags = READ_REG(hi3c->Instance->EVR); + uint32_t it_sources = READ_REG(hi3c->Instance->IER); + + uint32_t it_masks = (uint32_t)(it_flags & it_sources); + + /* I3C events treatment */ + if (hi3c->XferISR != NULL) + { + hi3c->XferISR(hi3c, it_masks); + } +} +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group3 Configuration functions. + * @brief I3C configuration functions. + * +@verbatim + ======================================================================================================================= + ##### Configuration functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to configure the I3C instances. + + (+) Call the function HAL_I3C_Ctrl_BusCharacteristicConfig() to modify the controller Bus Characteristics + after initialize the bus through HAL_I3C_Init. + + (+) Call the function HAL_I3C_Tgt_BusCharacteristicConfig() to modify the target Bus Characteristics + after initialize the bus through HAL_I3C_Init. + + (+) Call the function HAL_I3C_SetConfigFifo() to set FIFOs configuration (enabled FIFOs and + threshold level) with the selected parameters in the configuration structure I3C_FifoConfTypeDef. + + (+) Call the function HAL_I3C_Ctrl_Config() to configure the I3C Controller instances with the selected + parameters in the configuration structure I3C_CtrlConfTypeDef. + This function is called only when mode is Controller. + + (+) Call the function HAL_I3C_Tgt_Config() to configure the I3C Target instances with the selected + parameters in the configuration structure I3C_TgtConfTypeDef. + This function is called only when mode is Target. + + (+) Call the function HAL_I3C_Ctrl_ConfigBusDevices() to configure Hardware device characteristics register + with Devices capabilities present on the Bus. + All different characteristics must be fill through structure I3C_DeviceConfTypeDef. + This function is called only when mode is Controller. + + (+) Call the function HAL_I3C_AddDescToFrame() to prepare the full transfer usecase in a transfer descriptor + which contained different buffer pointers and their associated size through I3C_XferTypeDef. + This function must be called before initiate any communication transfer. + [..] + (@) Users must call all above functions after I3C initialization. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the Controller Bus characterics. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN] Pointer to an LL_I3C_CtrlBusConfTypeDef structure contains controller bus configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_BusCharacteristicConfig(I3C_HandleTypeDef *hi3c, + const LL_I3C_CtrlBusConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t waveform_value; + uint32_t timing_value; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state and mode */ + else if ((hi3c->State != HAL_I3C_STATE_READY) || (hi3c->Mode != HAL_I3C_MODE_CONTROLLER)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_I3C_SDAHOLDTIME_VALUE(pConfig->SDAHoldTime)); + assert_param(IS_I3C_WAITTIME_VALUE(pConfig->WaitTime)); + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + + /*----------------- SCL signal waveform configuration : I3C timing register 0 (I3C_TIMINGR0) ------------------ */ + /* Set the controller SCL waveform */ + waveform_value = ((uint32_t)pConfig->SCLPPLowDuration | + ((uint32_t)pConfig->SCLI3CHighDuration << I3C_TIMINGR0_SCLH_I3C_Pos) | + ((uint32_t)pConfig->SCLODLowDuration << I3C_TIMINGR0_SCLL_OD_Pos) | + ((uint32_t)pConfig->SCLI2CHighDuration << I3C_TIMINGR0_SCLH_I2C_Pos)); + + LL_I3C_ConfigClockWaveForm(hi3c->Instance, waveform_value); + + /*------------------ Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ------------------------------ */ + /* Set SDA hold time, activity state, bus free duration and bus available duration */ + timing_value = ((uint32_t)pConfig->SDAHoldTime | + (uint32_t)pConfig->WaitTime | + ((uint32_t)pConfig->BusFreeDuration << I3C_TIMINGR1_FREE_Pos) | + (uint32_t)pConfig->BusIdleDuration); + + LL_I3C_SetCtrlBusCharacteristic(hi3c->Instance, timing_value); + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Configure the target Bus characterics. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN] Pointer to an LL_I3C_TgtBusConfTypeDef structure contains target bus configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_BusCharacteristicConfig(I3C_HandleTypeDef *hi3c, + const LL_I3C_TgtBusConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state and mode */ + if ((hi3c->State != HAL_I3C_STATE_READY) || (hi3c->Mode != HAL_I3C_MODE_TARGET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + + /*------------------ Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ---------------------------- */ + /* Set the number of kernel clocks cycles for the bus available condition time */ + LL_I3C_SetAvalTiming(hi3c->Instance, pConfig->BusAvailableDuration); + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(hi3c->Instance); + } + } + } + + return status; +} + +/** + * @brief Set I3C FIFOs configuration. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN] Pointer to an I3C_FifoConfTypeDef structure contains FIFOs configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_SetConfigFifo(I3C_HandleTypeDef *hi3c, const I3C_FifoConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t cfgr_value; + uint32_t cfgr_mask; + + /* Check the I3C handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state */ + else if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check configuration parameters */ + assert_param(IS_I3C_TXFIFOTHRESHOLD_VALUE(pConfig->TxFifoThreshold)); + assert_param(IS_I3C_RXFIFOTHRESHOLD_VALUE(pConfig->RxFifoThreshold)); + + /* Set Tx and Rx Fifo threshold */ + cfgr_value = (pConfig->TxFifoThreshold | pConfig->RxFifoThreshold); + cfgr_mask = (I3C_CFGR_TXTHRES | I3C_CFGR_RXTHRES); + + /* Check on the I3C mode: Control and status FIFOs available only with controller mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Check configuration parameters */ + assert_param(IS_I3C_CONTROLFIFOSTATE_VALUE(pConfig->ControlFifo)); + assert_param(IS_I3C_STATUSFIFOSTATE_VALUE(pConfig->StatusFifo)); + + /* Set Control and Status Fifo states */ + cfgr_value |= (pConfig->StatusFifo | pConfig->ControlFifo); + cfgr_mask |= (I3C_CFGR_TMODE | I3C_CFGR_SMODE); + } + + /* Set configuration in the CFGR register */ + MODIFY_REG(hi3c->Instance->CFGR, cfgr_mask, cfgr_value); + } + } + + return status; +} + +/** + * @brief Set I3C controller configuration. + * @note This function is called only when the I3C instance is initialized as controller. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN] Pointer to an I3C_CtrlConfTypeDef structure that contains controller configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Config(I3C_HandleTypeDef *hi3c, const I3C_CtrlConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t timing2_value; + uint32_t cfgr_value; + + /* Check the I3C handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state and mode */ + else if ((hi3c->State == HAL_I3C_STATE_RESET) || (hi3c->Mode != HAL_I3C_MODE_CONTROLLER)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Check configuration parameters values */ + assert_param(IS_I3C_DYNAMICADDRESS_VALUE(pConfig->DynamicAddr)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->HighKeeperSDA)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->HotJoinAllowed)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->ACKStallState)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->CCCStallState)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->TxStallState)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->RxStallState)); + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + + /* Calculate value to be written in timing register 2 */ + timing2_value = (((uint32_t)pConfig->StallTime << I3C_TIMINGR2_STALL_Pos) | + ((uint32_t)pConfig->ACKStallState << I3C_TIMINGR2_STALLA_Pos) | + ((uint32_t)pConfig->CCCStallState << I3C_TIMINGR2_STALLC_Pos) | + ((uint32_t)pConfig->TxStallState << I3C_TIMINGR2_STALLD_Pos) | + ((uint32_t)pConfig->RxStallState << I3C_TIMINGR2_STALLT_Pos)); + + /* Set value in timing 2 register */ + WRITE_REG(hi3c->Instance->TIMINGR2, timing2_value); + + /* Calculate value to be written in CFGR register */ + cfgr_value = (((uint32_t)pConfig->HighKeeperSDA << I3C_CFGR_HKSDAEN_Pos) | + ((uint32_t)pConfig->HotJoinAllowed << I3C_CFGR_HJACK_Pos)); + + /* Set hot join acknowledge and high keeper values */ + MODIFY_REG(hi3c->Instance->CFGR, I3C_CFGR_HKSDAEN | I3C_CFGR_HJACK, cfgr_value); + + /* Set dynamic address value */ + LL_I3C_SetOwnDynamicAddress(hi3c->Instance, pConfig->DynamicAddr); + + /* Validate the controller dynamic address */ + LL_I3C_EnableOwnDynAddress(hi3c->Instance); + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Set I3C target configuration. + * @note This function is called only when the I3C instance is initialized as target. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN] Pointer to an I3C_TgtConfTypeDef structure that contains target configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Config(I3C_HandleTypeDef *hi3c, const I3C_TgtConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t getmxdsr_value; + uint32_t maxrlr_value; + uint32_t crccapr_value; + uint32_t bcr_value; + uint32_t devr0_value; + + /* Check the I3C handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state and mode */ + else if ((hi3c->State == HAL_I3C_STATE_RESET) || (hi3c->Mode != HAL_I3C_MODE_TARGET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Check configuration parameters values */ + assert_param(IS_I3C_HANDOFFACTIVITYSTATE_VALUE(pConfig->HandOffActivityState)); + assert_param(IS_I3C_TSCOTIME_VALUE(pConfig->DataTurnAroundDuration)); + assert_param(IS_I3C_MAXSPEEDDATA_VALUE(pConfig->MaxDataSpeed)); + assert_param(IS_I3C_IBIPAYLOADSIZE_VALUE(pConfig->IBIPayloadSize)); + assert_param(IS_I3C_MIPIIDENTIFIER_VALUE(pConfig->MIPIIdentifier)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->HandOffDelay)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->GroupAddrCapability)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->PendingReadMDB)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->IBIPayload)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->MaxSpeedLimitation)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->CtrlCapability)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->IBIRequest)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->CtrlRoleRequest)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pConfig->HotJoinRequest)); + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(hi3c->Instance); + + /* Calculate value to be written in the GETMXDSR register */ + getmxdsr_value = (pConfig->HandOffActivityState | pConfig->MaxDataSpeed | pConfig->DataTurnAroundDuration | + ((uint32_t)pConfig->MaxReadTurnAround << I3C_GETMXDSR_RDTURN_Pos)); + + /* Set value in GETMXDSR register */ + WRITE_REG(hi3c->Instance->GETMXDSR, getmxdsr_value); + + /* Calculate value to be written in MAXRLR register */ + maxrlr_value = (pConfig->IBIPayloadSize | (pConfig->MaxReadDataSize & I3C_MAXRLR_MRL)); + + /* Set payload size and max read data size in MAXRLR register */ + WRITE_REG(hi3c->Instance->MAXRLR, maxrlr_value); + + /* Set max write data size in MAXWLR register */ + LL_I3C_SetMaxWriteLength(hi3c->Instance, pConfig->MaxWriteDataSize); + + /* Set MIPI identifier value in EPIDR register */ + LL_I3C_SetMIPIInstanceID(hi3c->Instance, pConfig->MIPIIdentifier); + + /* Set identifier value in DCR register */ + LL_I3C_SetDeviceCharacteristics(hi3c->Instance, pConfig->Identifier); + + /* Calculate value to be written in CRCCAPR register */ + crccapr_value = (((uint32_t)pConfig->HandOffDelay << I3C_CRCAPR_CAPDHOFF_Pos) | + ((uint32_t)pConfig->GroupAddrCapability << I3C_CRCAPR_CAPGRP_Pos)); + + /* Set hand off dealy and group address capability in CRCCAPR register */ + WRITE_REG(hi3c->Instance->CRCAPR, crccapr_value); + + /* Set pending read MDB notification value in GETCAPR register */ + LL_I3C_SetPendingReadMDB(hi3c->Instance, ((uint32_t)pConfig->PendingReadMDB << I3C_GETCAPR_CAPPEND_Pos)); + + /* Calculate value to be written in BCR register */ + bcr_value = (((uint32_t)pConfig->MaxSpeedLimitation << I3C_BCR_BCR0_Pos) | + ((uint32_t)pConfig->IBIPayload << I3C_BCR_BCR2_Pos) | + ((uint32_t)pConfig->CtrlCapability << I3C_BCR_BCR6_Pos)); + + /* Set control capability, IBI payload support and max speed limitation in BCR register */ + WRITE_REG(hi3c->Instance->BCR, bcr_value); + + /* Calculate value to be written in CFGR register */ + devr0_value = (((uint32_t)pConfig->IBIRequest << I3C_DEVR0_IBIEN_Pos) | + ((uint32_t)pConfig->CtrlRoleRequest << I3C_DEVR0_CREN_Pos) | + ((uint32_t)pConfig->HotJoinRequest << I3C_DEVR0_HJEN_Pos)); + + /* Set IBI request, control role request and hot join request in DEVR0 register */ + MODIFY_REG(hi3c->Instance->DEVR0, (I3C_DEVR0_HJEN | I3C_DEVR0_IBIEN | I3C_DEVR0_CREN), devr0_value); + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Set I3C bus devices configuration. + * @note This function is called only when the I3C instance is initialized as controller. + * This function can be called by the controller application to help the automatic treatment when target have + * capability of IBI and/or Control-Role. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pDesc : [IN] Pointer to an I3C_DeviceConfTypeDef descriptor that contains the bus devices + * configurations. + * @param nbDevice : [IN] Value specifies the number of devices to be treated. + * This parameter must be a number between Min_Data=1U and Max_Data=4U. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_ConfigBusDevices(I3C_HandleTypeDef *hi3c, + const I3C_DeviceConfTypeDef *pDesc, + uint8_t nbDevice) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t write_value; + + /* Check the I3C handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check on user parameters */ + if (pDesc == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state and mode */ + else if ((hi3c->State == HAL_I3C_STATE_RESET) || (hi3c->Mode != HAL_I3C_MODE_CONTROLLER)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + assert_param(IS_I3C_DEVICE_VALUE(nbDevice)); + + /* Loop on the nbDevice to be treated */ + for (uint32_t index = 0U; index < nbDevice; index++) + { + /* Check configuration parameters values */ + assert_param(IS_I3C_DEVICE_VALUE(pDesc[index].DeviceIndex)); + assert_param(IS_I3C_DYNAMICADDRESS_VALUE(pDesc[index].TargetDynamicAddr)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pDesc[index].IBIAck)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pDesc[index].CtrlRoleReqAck)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pDesc[index].CtrlStopTransfer)); + assert_param(IS_I3C_FUNCTIONALSTATE_VALUE(pDesc[index].IBIPayload)); + + /* Set value to be written */ + write_value = (((uint32_t)pDesc[index].TargetDynamicAddr << I3C_DEVRX_DA_Pos) | + ((uint32_t)pDesc[index].IBIAck << I3C_DEVRX_IBIACK_Pos) | + ((uint32_t)pDesc[index].CtrlRoleReqAck << I3C_DEVRX_CRACK_Pos) | + ((uint32_t)pDesc[index].CtrlStopTransfer << I3C_DEVRX_SUSP_Pos) | + ((uint32_t)pDesc[index].IBIPayload << I3C_DEVRX_IBIDEN_Pos)); + + /* Write configuration in the DEVRx register */ + WRITE_REG(hi3c->Instance->DEVRX[(pDesc[index].DeviceIndex - 1U)], write_value); + } + } + } + + return status; +} + +/** + * @brief Add Private or CCC descriptor in the user data transfer descriptor. + * @note This function must be called before initiate any communication transfer. This function help the preparation + * of the full transfer usecase in a transfer descriptor which contained different buffer pointers + * and their associated size through I3C_XferTypeDef. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pCCCDesc : [IN] Pointer to an I3C_CCCTypeDef structure that contains the CCC descriptor information. + * @param pPrivateDesc : [IN] Pointer to an I3C_PrivateTypeDef structure that contains the transfer descriptor. + * @param pXferData : [IN/OUT] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * @param nbFrame : [IN] The number of CCC commands or the number of device to treat. + * @param option : [IN] Value indicates the transfer option. It can be one value of @ref I3C_OPTION_DEFINITION + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_AddDescToFrame(I3C_HandleTypeDef *hi3c, + const I3C_CCCTypeDef *pCCCDesc, + const I3C_PrivateTypeDef *pPrivateDesc, + I3C_XferTypeDef *pXferData, + uint8_t nbFrame, + uint32_t option) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->pCCCDesc = pCCCDesc; + hi3c->pPrivateDesc = pPrivateDesc; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = 0; + hi3c->TxXferCount = 0; + + /* Prepare Direction, and Check on user parameters */ + if (((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_CCC) || + ((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_DIRECT)) + { + /* Check on user parameters */ + if ((pCCCDesc == NULL) || + (pXferData == NULL) || + (nbFrame < 1U) || + (((option & (I3C_OPERATION_TYPE_MASK | I3C_DEFINE_BYTE_MASK)) == \ + (LL_I3C_CONTROLLER_MTYPE_DIRECT | I3C_DEFINE_BYTE_MASK)) && (pCCCDesc->CCCBuf.Size == 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + else + { + /* Check on user parameters */ + if ((pPrivateDesc == NULL) || (pXferData == NULL) || (nbFrame <= 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* check on the State */ + if ((handle_state == HAL_I3C_STATE_READY) || (handle_state == HAL_I3C_STATE_LISTEN)) + { + /* I3C control buffer prior preparation */ + if (I3C_ControlBuffer_PriorPreparation(hi3c, nbFrame, option) != HAL_OK) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + + /* I3C Tx Buffer prior preparation, set and check RxCount */ + if (I3C_Xfer_PriorPreparation(hi3c, nbFrame, option) != HAL_OK) + { + status = HAL_ERROR; + } + } + else + { + status = HAL_BUSY; + } + } + } + + return status; +} + +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group4 FIFO Management functions. + * @brief I3C FIFO management functions. + * +@verbatim + ======================================================================================================================= + ##### FIFO Management functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to manage I3C FIFOs. + + (+) Call the function HAL_I3C_FlushAllFifo() to flush the content of all used FIFOs (Control, Status, + Tx and Rx FIFO). + (+) Call the function HAL_I3C_FlushTxFifo() to flush only the content of Tx FIFO. + (+) Call the function HAL_I3C_FlushRxFifo() to flush only the content of Rx FIFO. + (+) Call the function HAL_I3C_FlushControlFifo() to flush only the content of Control FIFO. + This function is called only when mode is controller. + (+) Call the function HAL_I3C_FlushStatusFifo() to flush only the content of Status FIFO. + This function is called only when mode is controller. + (+) Call the function HAL_I3C_ClearConfigFifo() to clear the FIFOs configuration and set it to default values. + (+) Call the function HAL_I3C_GetConfigFifo() to get the current FIFOs configuration (enabled FIFOs and + threshold level). + + (+) Users must not call all above functions before I3C initialization. + + (+) Users should call Flush APIs after an end of process, before starting a transfer or in case of bus + failure and error detection. + +@endverbatim + * @{ + */ + +/** + * @brief Flush all I3C FIFOs content. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_FlushAllFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t cfgr_value; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Flush the content of Tx and Rx Fifo */ + cfgr_value = (I3C_CFGR_TXFLUSH | I3C_CFGR_RXFLUSH); + + /* Check on the I3C mode: Control and status FIFOs available only with controller mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Flush the content of Control and Status Fifo */ + cfgr_value = (I3C_CFGR_SFLUSH | I3C_CFGR_CFLUSH); + } + + /* Set configuration in the CFGR register */ + MODIFY_REG(hi3c->Instance->CFGR, cfgr_value, cfgr_value); + } + } + + return status; +} + +/** + * @brief Flush I3C Tx FIFO content. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_FlushTxFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Flush the content of Tx Fifo */ + LL_I3C_RequestTxFIFOFlush(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Flush I3C Rx FIFO content. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_FlushRxFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Flush the content of Rx Fifo */ + LL_I3C_RequestRxFIFOFlush(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Flush I3C control FIFO content. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_FlushControlFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state and mode */ + if ((hi3c->State == HAL_I3C_STATE_RESET) || (hi3c->Mode != HAL_I3C_MODE_CONTROLLER)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Flush the content of Control Fifo */ + LL_I3C_RequestControlFIFOFlush(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Flush I3C status FIFO content. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_FlushStatusFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state and mode */ + if ((hi3c->State == HAL_I3C_STATE_RESET) || (hi3c->Mode != HAL_I3C_MODE_CONTROLLER)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Flush the content of Control Fifo */ + LL_I3C_RequestStatusFIFOFlush(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Clear I3C FIFOs configuration and set it to default values. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_ClearConfigFifo(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t cfgr_value; + uint32_t cfgr_mask; + + /* Check the I3C handle allocation */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check the I3C state */ + if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Clear Tx Fifo and Rx Fifo threshold and set it to default value */ + cfgr_value = (LL_I3C_TXFIFO_THRESHOLD_1_4 | LL_I3C_RXFIFO_THRESHOLD_1_4); + cfgr_mask = (I3C_CFGR_TXTHRES | I3C_CFGR_RXTHRES); + + /* Check on the I3C mode: Control and status FIFOs available only with controller mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Disable the status and Control Fifo state */ + cfgr_value |= (HAL_I3C_STATUSFIFO_DISABLE | HAL_I3C_CONTROLFIFO_DISABLE); + cfgr_mask |= (I3C_CFGR_TMODE | I3C_CFGR_SMODE); + } + + /* Set configuration in the CFGR register */ + MODIFY_REG(hi3c->Instance->CFGR, cfgr_mask, cfgr_value); + } + } + + return status; +} + +/** + * @brief Get I3C FIFOs current configuration. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pConfig : [IN/OUT] Pointer to an I3C_FifoConfTypeDef structure that returns current FIFOs configuration. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_GetConfigFifo(I3C_HandleTypeDef *hi3c, I3C_FifoConfTypeDef *pConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the I3C handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Check on user parameters */ + if (pConfig == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state */ + else if (hi3c->State == HAL_I3C_STATE_RESET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Get Tx Fifo threshold */ + pConfig->TxFifoThreshold = LL_I3C_GetTxFIFOThreshold(hi3c->Instance); + + /* Get Rx Fifo threshold */ + pConfig->RxFifoThreshold = LL_I3C_GetRxFIFOThreshold(hi3c->Instance); + + /* Get the Control Fifo state */ + pConfig->ControlFifo = (uint32_t)(LL_I3C_IsEnabledControlFIFO(hi3c->Instance) << I3C_CFGR_TMODE_Pos); + + /* Get the status Fifo state */ + pConfig->StatusFifo = (uint32_t)(LL_I3C_IsEnabledStatusFIFO(hi3c->Instance) << I3C_CFGR_SMODE_Pos); + } + } + + return status; +} +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group5 Controller operational functions. + * @brief I3C controller operational functions. + * +@verbatim + ======================================================================================================================= + ##### Controller operational functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to manage controller I3C operation. + + (+) Call the function HAL_I3C_Ctrl_TransmitCCC() to transmit direct write or a broadcast + CCC command in polling mode. + (+) Call the function HAL_I3C_Ctrl_TransmitCCC_IT() to transmit direct write or a broadcast + CCC command in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_TransmitCCC_DMA() to transmit direct write or a broadcast + CCC command in DMA mode. + (+) Call the function HAL_I3C_Ctrl_ReceiveCCC() to transmit direct read CCC command in polling mode. + (+) Call the function HAL_I3C_Ctrl_ReceiveCCC_IT() to transmit direct read CCC command in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_ReceiveCCC_DMA() to transmit direct read CCC command in DMA mode. + (+) Call the function HAL_I3C_Ctrl_Transmit() to transmit private data in polling mode. + (+) Call the function HAL_I3C_Ctrl_Transmit_IT() to transmit private data in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_Transmit_DMA() to transmit private data in DMA mode. + (+) Call the function HAL_I3C_Ctrl_Receive() to receive private data in polling mode. + (+) Call the function HAL_I3C_Ctrl_Receive_IT() to receive private data in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_Receive_DMA() to receive private data in DMA mode. + (+) Call the function HAL_I3C_Ctrl_MultipleTransfer_IT() to transfer I3C or I2C private data or CCC command + in multiple direction in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_MultipleTransfer_DMA() to transfer I3C or I2C private data or CCC command + in multiple direction in DMA mode. + (+) Call the function HAL_I3C_Ctrl_DynAddrAssign() to send a broadcast ENTDAA CCC + command in polling mode. + (+) Call the function HAL_I3C_Ctrl_DynAddrAssign_IT() to send a broadcast ENTDAA CCC + command in interrupt mode. + (+) Call the function HAL_I3C_Ctrl_SetDynAddr() to set, asscociate the target dynamic address + during the Dynamic Address Assignment processus. + (+) Call the function HAL_I3C_Ctrl_IsDeviceI3C_Ready() to check if I3C target device is ready. + (+) Call the function HAL_I3C_Ctrl_IsDeviceI2C_Ready() to check if I2C target device is ready. + + (+) Those functions are called only when mode is Controller. + +@endverbatim + * @{ + */ + +/** + * @brief Controller transmit direct write or a broadcast CCC command in polling mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout) +{ + uint32_t tickstart; + uint32_t exit_condition; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + /* Update returned status value */ + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check on control FIFO enable/disable state */ + if (LL_I3C_IsEnabledControlFIFO(hi3c->Instance) == 1U) + { + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Decrement remaining control buffer data counter */ + hi3c->ControlXferCount--; + + /* Initiate a start condition by writing in the CR register */ + WRITE_REG(hi3c->Instance->CR, *hi3c->pXferData->CtrlBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->CtrlBuf.pBuffer++; + } + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + /* Check if hardware asks for control data */ + if (hi3c->ControlXferCount > 0U) + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + } + + /* Check if hardware asks for Tx data */ + if (hi3c->TxXferCount > 0U) + { + /* Call transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + + /* Check for the timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + break; + } + } + + if ((__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) && (hi3c->ControlXferCount > 0U)) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + } while ((exit_condition == 0U) || + ((exit_condition == I3C_EVR_FCF) && (hi3c->ControlXferCount > 0U))); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update returned status value */ + status = HAL_ERROR; + } + + /* At the end of Tx process update state to Previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Controller transmit direct write or a broadcast CCC command in interrupt mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + if (handle_state == HAL_I3C_STATE_LISTEN) + { + hi3c->XferISR = I3C_Ctrl_Tx_Listen_Event_ISR; + } + else + { + hi3c->XferISR = I3C_Ctrl_Tx_ISR; + } + + hi3c->pXferData = pXferData; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_TX_IT); + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Controller transmit direct write or a broadcast CCC command in DMA mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_TransmitCCC_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef control_dma_status; + HAL_StatusTypeDef tx_dma_status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmatx and hdmacr handle */ + else if ((hi3c->hdmatx == NULL) || (hi3c->hdmacr == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->XferISR = I3C_Ctrl_Tx_DMA_ISR; + hi3c->pXferData = pXferData; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + + /*------------------------------------ I3C DMA channel for Control Data ----------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmacr->XferCpltCallback = I3C_DMAControlTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmacr->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmacr->XferHalfCpltCallback = NULL; + hi3c->hdmacr->XferAbortCallback = NULL; + + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmacr->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmacr->Init.DestDataWidth)); + + /* Enable the control data DMA channel */ + control_dma_status = HAL_DMA_Start_IT(hi3c->hdmacr, (uint32_t)hi3c->pXferData->CtrlBuf.pBuffer, + (uint32_t)&hi3c->Instance->CR, (hi3c->ControlXferCount * 4U)); + + /*------------------------------------ I3C DMA channel for the Tx Data -----------------------------------------*/ + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmatx->XferCpltCallback = I3C_DMADataTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmatx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmatx->XferHalfCpltCallback = NULL; + hi3c->hdmatx->XferAbortCallback = NULL; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDR, hi3c->pXferData->TxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->TxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->TxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->TxBuf.Size + 4U) - (hi3c->pXferData->TxBuf.Size % 4U)); + } + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDWR, size_align_word); + } + } + + /* Check if DMA process is well started */ + if ((control_dma_status == HAL_OK) && (tx_dma_status == HAL_OK)) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->ControlXferCount = 0U; + + /* Enable control DMA Request */ + LL_I3C_EnableDMAReq_Control(hi3c->Instance); + + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Enable Tx data DMA Request */ + LL_I3C_EnableDMAReq_TX(hi3c->Instance); + } + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmacr) == HAL_OK) + { + hi3c->hdmacr->XferCpltCallback = NULL; + hi3c->hdmacr->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmatx) == HAL_OK) + { + hi3c->hdmatx->XferCpltCallback = NULL; + hi3c->hdmatx->XferErrorCallback = NULL; + } + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Controller transmit direct read CCC command in polling mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout) +{ + uint32_t tickstart; + uint32_t exit_condition; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + (pXferData->RxBuf.pBuffer == NULL) || + ((pXferData->TxBuf.pBuffer == NULL) && (hi3c->TxXferCount != 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + + /* Check on CCC defining byte */ + if (hi3c->TxXferCount != 0U) + { + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + } + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check on control FIFO enable/disable state */ + if (LL_I3C_IsEnabledControlFIFO(hi3c->Instance) == 1U) + { + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Decrement remaining control buffer data counter */ + hi3c->ControlXferCount--; + + /* Initiate a start condition by writing in the CR register */ + WRITE_REG(hi3c->Instance->CR, *hi3c->pXferData->CtrlBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->CtrlBuf.pBuffer++; + } + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + + if (hi3c->TxXferCount != 0U) + { + /* Call transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + + /* Check for the timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + + if ((__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) && (hi3c->ControlXferCount > 0U)) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + } while ((exit_condition == 0U) || + ((exit_condition == I3C_EVR_FCF) && (hi3c->ControlXferCount > 0U))); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check if all data bytes are received */ + if ((hi3c->RxXferCount != 0U) && (status == HAL_OK)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + status = HAL_ERROR; + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update returned status value */ + status = HAL_ERROR; + } + + /* At the end of Rx process update state to Previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Controller transmit direct read CCC command in interrupt mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + (pXferData->RxBuf.pBuffer == NULL) || + ((pXferData->TxBuf.pBuffer == NULL) && (hi3c->TxXferCount != 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + if (handle_state == HAL_I3C_STATE_LISTEN) + { + hi3c->XferISR = I3C_Ctrl_Rx_Listen_Event_ISR; + } + else + { + hi3c->XferISR = I3C_Ctrl_Rx_ISR; + } + hi3c->pXferData = pXferData; + hi3c->RxXferCount = pXferData->RxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + + /* Check on CCC defining byte */ + if (hi3c->TxXferCount != 0U) + { + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + } + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_CCC_IT); + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Controller transmit direct read CCC command in DMA mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_ReceiveCCC_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + HAL_StatusTypeDef control_dma_status; + HAL_StatusTypeDef tx_dma_status = HAL_OK; + HAL_StatusTypeDef rx_dma_status = HAL_OK; + uint32_t size_align_word; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + (pXferData->RxBuf.pBuffer == NULL) || + ((pXferData->TxBuf.pBuffer == NULL) && (hi3c->TxXferCount != 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmarx and hdmacr handle */ + else if ((hi3c->hdmarx == NULL) || (hi3c->hdmacr == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + else if ((hi3c->TxXferCount != 0U) && (hi3c->hdmatx == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->XferISR = I3C_Ctrl_Rx_DMA_ISR; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + + /*------------------------------------ I3C DMA channel for Control Data ----------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmacr->XferCpltCallback = I3C_DMAControlTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmacr->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmacr->XferHalfCpltCallback = NULL; + hi3c->hdmacr->XferAbortCallback = NULL; + + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmacr->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmacr->Init.DestDataWidth)); + + /* Enable the control data DMA channel */ + control_dma_status = HAL_DMA_Start_IT(hi3c->hdmacr, (uint32_t)hi3c->pXferData->CtrlBuf.pBuffer, + (uint32_t)&hi3c->Instance->CR, (hi3c->ControlXferCount * 4U)); + + /*------------------------------------ I3C DMA channel for defining byte ---------------------------------------*/ + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmatx->XferCpltCallback = I3C_DMADataTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmatx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmatx->XferHalfCpltCallback = NULL; + hi3c->hdmatx->XferAbortCallback = NULL; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDR, hi3c->pXferData->TxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->TxBuf.Size + 4U) - (hi3c->pXferData->TxBuf.Size % 4U)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDWR, size_align_word); + } + } + /*------------------------------------ I3C DMA channel for the Rx Data -----------------------------------------*/ + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmarx->XferCpltCallback = I3C_DMADataReceiveCplt; + + /* Set the DMA error callback */ + hi3c->hdmarx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmarx->XferHalfCpltCallback = NULL; + hi3c->hdmarx->XferAbortCallback = NULL; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, hi3c->pXferData->RxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->RxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->RxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->RxBuf.Size + 4U) - (hi3c->pXferData->RxBuf.Size % 4U)); + } + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDWR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, size_align_word); + } + } + + /* Check if DMA process is well started */ + if ((control_dma_status == HAL_OK) && (tx_dma_status == HAL_OK) && (rx_dma_status == HAL_OK)) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->ControlXferCount = 0U; + + /* Enable control DMA Request */ + LL_I3C_EnableDMAReq_Control(hi3c->Instance); + + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Enable Tx data DMA Request */ + LL_I3C_EnableDMAReq_TX(hi3c->Instance); + } + + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Enable Rx data DMA Request */ + LL_I3C_EnableDMAReq_RX(hi3c->Instance); + } + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmacr) == HAL_OK) + { + hi3c->hdmacr->XferCpltCallback = NULL; + hi3c->hdmacr->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmatx) == HAL_OK) + { + hi3c->hdmatx->XferCpltCallback = NULL; + hi3c->hdmatx->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmarx) == HAL_OK) + { + hi3c->hdmarx->XferCpltCallback = NULL; + hi3c->hdmarx->XferErrorCallback = NULL; + } + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Controller private write in polling mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @note The TxBuf.Size must be equal to the sum of all TxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout) +{ + uint32_t tickstart; + uint32_t exit_condition; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check on control FIFO enable/disable state */ + if (LL_I3C_IsEnabledControlFIFO(hi3c->Instance) == 1U) + { + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Decrement remaining control buffer data counter */ + hi3c->ControlXferCount--; + + /* Initiate a start condition by writing in the CR register */ + WRITE_REG(hi3c->Instance->CR, *hi3c->pXferData->CtrlBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->CtrlBuf.pBuffer++; + } + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + + /* Call transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + + /* Check for the timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + + if ((__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) && (hi3c->ControlXferCount > 0U)) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + } while ((exit_condition == 0U) || + ((exit_condition == I3C_EVR_FCF) && (hi3c->ControlXferCount > 0U))); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check if all data bytes are transmitted */ + if ((hi3c->TxXferCount != 0U) && (status == HAL_OK)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + status = HAL_ERROR; + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update returned status value */ + status = HAL_ERROR; + } + + /* At the end of Tx process update state to Previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Controller private write in interrupt mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @note The TxBuf.Size must be equal to the sum of all TxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + if (handle_state == HAL_I3C_STATE_LISTEN) + { + hi3c->XferISR = I3C_Ctrl_Tx_Listen_Event_ISR; + } + else + { + hi3c->XferISR = I3C_Ctrl_Tx_ISR; + } + hi3c->pXferData = pXferData; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_TX_IT); + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Controller private write in DMA mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @note The TxBuf.Size must be equal to the sum of all TxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Transmit_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef control_dma_status; + HAL_StatusTypeDef tx_dma_status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((hi3c->TxXferCount != 0U) && (pXferData->TxBuf.pBuffer == NULL))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmatx and hdmacr handle */ + else if ((hi3c->hdmatx == NULL) || (hi3c->hdmacr == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->XferISR = I3C_Ctrl_Tx_DMA_ISR; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + + /*------------------------------------ I3C DMA channel for Control Data ----------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmacr->XferCpltCallback = I3C_DMAControlTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmacr->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmacr->XferHalfCpltCallback = NULL; + hi3c->hdmacr->XferAbortCallback = NULL; + + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmacr->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmacr->Init.DestDataWidth)); + + /* Enable the control data DMA channel */ + control_dma_status = HAL_DMA_Start_IT(hi3c->hdmacr, (uint32_t)hi3c->pXferData->CtrlBuf.pBuffer, + (uint32_t)&hi3c->Instance->CR, (hi3c->ControlXferCount * 4U)); + + /*------------------------------------ I3C DMA channel for the Tx Data -----------------------------------------*/ + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmatx->XferCpltCallback = I3C_DMADataTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmatx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmatx->XferHalfCpltCallback = NULL; + hi3c->hdmatx->XferAbortCallback = NULL; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDR, hi3c->pXferData->TxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->TxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->TxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->TxBuf.Size + 4U) - (hi3c->pXferData->TxBuf.Size % 4U)); + } + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDWR, size_align_word); + } + } + + /* Check if DMA process is well started */ + if ((control_dma_status == HAL_OK) && (tx_dma_status == HAL_OK)) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->ControlXferCount = 0U; + + /* Enable control DMA Request */ + LL_I3C_EnableDMAReq_Control(hi3c->Instance); + + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Enable Tx data DMA Request */ + LL_I3C_EnableDMAReq_TX(hi3c->Instance); + } + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmacr) == HAL_OK) + { + hi3c->hdmacr->XferCpltCallback = NULL; + hi3c->hdmacr->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmatx) == HAL_OK) + { + hi3c->hdmatx->XferCpltCallback = NULL; + hi3c->hdmatx->XferErrorCallback = NULL; + } + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Controller private read in polling mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData, + uint32_t timeout) +{ + uint32_t tickstart; + uint32_t exit_condition; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check on control FIFO enable/disable state */ + if (LL_I3C_IsEnabledControlFIFO(hi3c->Instance) == 1U) + { + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Decrement remaining control buffer data counter */ + hi3c->ControlXferCount--; + + /* Initiate a start condition by writing in the CR register */ + WRITE_REG(hi3c->Instance->CR, *hi3c->pXferData->CtrlBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->CtrlBuf.pBuffer++; + } + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + + /* Check for the timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + + if ((__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) && (hi3c->ControlXferCount > 0U)) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + } while ((exit_condition == 0U) || + ((exit_condition == I3C_EVR_FCF) && (hi3c->ControlXferCount > 0U))); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check if all data bytes are received */ + if ((hi3c->RxXferCount != 0U) && (status == HAL_OK)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + status = HAL_ERROR; + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update returned status value */ + status = HAL_ERROR; + } + + /* At the end of Rx process update state to Previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Controller private read in interrupt mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + if (handle_state == HAL_I3C_STATE_LISTEN) + { + hi3c->XferISR = I3C_Ctrl_Rx_Listen_Event_ISR; + } + else + { + hi3c->XferISR = I3C_Ctrl_Rx_ISR; + } + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_IT); + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Controller private read in DMA mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * (control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_Receive_DMA(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef control_dma_status; + HAL_StatusTypeDef rx_dma_status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmarx and hdmacr handle */ + else if ((hi3c->hdmarx == NULL) || (hi3c->hdmacr == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->XferISR = I3C_Ctrl_Rx_DMA_ISR; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + + /*------------------------------------ I3C DMA channel for Control Data ----------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmacr->XferCpltCallback = I3C_DMAControlTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmacr->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmacr->XferHalfCpltCallback = NULL; + hi3c->hdmacr->XferAbortCallback = NULL; + + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmacr->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmacr->Init.DestDataWidth)); + + /* Enable the control data DMA channel */ + control_dma_status = HAL_DMA_Start_IT(hi3c->hdmacr, (uint32_t)hi3c->pXferData->CtrlBuf.pBuffer, + (uint32_t)&hi3c->Instance->CR, (hi3c->ControlXferCount * 4U)); + + /*------------------------------------ I3C DMA channel for the Rx Data -----------------------------------------*/ + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmarx->XferCpltCallback = I3C_DMADataReceiveCplt; + + /* Set the DMA error callback */ + hi3c->hdmarx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmarx->XferHalfCpltCallback = NULL; + hi3c->hdmarx->XferAbortCallback = NULL; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, hi3c->pXferData->RxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->RxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->RxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->RxBuf.Size + 4U) - (hi3c->pXferData->RxBuf.Size % 4U)); + } + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDWR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, size_align_word); + } + } + + /* Check if DMA process is well started */ + if ((control_dma_status == HAL_OK) && (rx_dma_status == HAL_OK)) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->ControlXferCount = 0U; + + /* Enable control DMA Request */ + LL_I3C_EnableDMAReq_Control(hi3c->Instance); + + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Enable Rx data DMA Request */ + LL_I3C_EnableDMAReq_RX(hi3c->Instance); + } + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmacr) == HAL_OK) + { + hi3c->hdmacr->XferCpltCallback = NULL; + hi3c->hdmacr->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmarx) == HAL_OK) + { + hi3c->hdmarx->XferCpltCallback = NULL; + hi3c->hdmarx->XferErrorCallback = NULL; + } + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Controller multiple Direct CCC Command, I3C private or I2C transfer in interrupt mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @note This function must be called to transfer read/write I3C or I2C private data or a direct read/write CCC. + * @note The TxBuf.Size must be equal to the sum of all TxBuf.Size exist in the descriptor. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmit and receive + * buffers (control buffer, data buffers and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_MultipleTransfer_IT(I3C_HandleTypeDef *hi3c, + I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((pXferData->RxBuf.pBuffer == NULL) && (hi3c->RxXferCount != 0U)) || + ((pXferData->TxBuf.pBuffer == NULL) && (hi3c->TxXferCount != 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + if (handle_state == HAL_I3C_STATE_LISTEN) + { + hi3c->XferISR = I3C_Ctrl_Multiple_Xfer_Listen_Event_ISR; + } + else + { + hi3c->XferISR = I3C_Ctrl_Multiple_Xfer_ISR; + } + hi3c->pXferData = pXferData; + hi3c->TxXferCount = hi3c->pXferData->TxBuf.Size; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_TX_RX; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx and Rx process interrupts */ + I3C_Enable_IRQ(hi3c, (I3C_XFER_CONTROLLER_TX_IT | I3C_XFER_CONTROLLER_RX_IT)); + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Controller multiple Direct CCC Command, I3C private or I2C transfer in DMA mode. + * @note The function @ref HAL_I3C_AddDescToFrame() must be called before initiate a transfer. + * @note The Tx FIFO threshold @ref HAL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + * multiple transmission frames. + * @note The TxBuf.Size must be equal to the sum of all TxBuf.Size exist in the descriptor. + * @note The RxBuf.Size must be equal to the sum of all RxBuf.Size exist in the descriptor. + * @note This function must be called to transfer read/write private data or a direct read/write CCC command. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmit and receive + * buffers(control buffer, data buffer and status buffer). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_MultipleTransfer_DMA(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef control_dma_status; + HAL_StatusTypeDef tx_dma_status = HAL_OK; + HAL_StatusTypeDef rx_dma_status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || + ((pXferData->RxBuf.pBuffer == NULL) && (hi3c->RxXferCount != 0U)) || + ((pXferData->TxBuf.pBuffer == NULL) && (hi3c->TxXferCount != 0U))) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmatx, hdmarx and hdmacr handle */ + else if ((hi3c->hdmatx == NULL) || (hi3c->hdmacr == NULL) || (hi3c->hdmarx == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->XferISR = I3C_Ctrl_Multiple_Xfer_DMA_ISR; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = hi3c->pXferData->RxBuf.Size; + hi3c->TxXferCount = hi3c->pXferData->TxBuf.Size; + hi3c->State = HAL_I3C_STATE_BUSY_TX_RX; + + /*------------------------------------ I3C DMA channel for Control Data -------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmacr->XferCpltCallback = I3C_DMAControlTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmacr->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmacr->XferHalfCpltCallback = NULL; + hi3c->hdmacr->XferAbortCallback = NULL; + + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmacr->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmacr->Init.DestDataWidth)); + + /* Enable the control data DMA channel */ + control_dma_status = HAL_DMA_Start_IT(hi3c->hdmacr, (uint32_t)hi3c->pXferData->CtrlBuf.pBuffer, + (uint32_t)&hi3c->Instance->CR, (hi3c->ControlXferCount * 4U)); + + /*------------------------------------ I3C DMA channel for the Rx Data --------------------------------*/ + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmarx->XferCpltCallback = I3C_DMADataReceiveCplt; + + /* Set the DMA error callback */ + hi3c->hdmarx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmarx->XferHalfCpltCallback = NULL; + hi3c->hdmarx->XferAbortCallback = NULL; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, hi3c->pXferData->RxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->RxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->RxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->RxBuf.Size + 4U) - (hi3c->pXferData->RxBuf.Size % 4U)); + } + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDWR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, size_align_word); + } + } + + /*------------------------------------ I3C DMA channel for the Tx Data --------------------------------*/ + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmatx->XferCpltCallback = I3C_DMADataTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmatx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmatx->XferHalfCpltCallback = NULL; + hi3c->hdmatx->XferAbortCallback = NULL; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDR, hi3c->pXferData->TxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->TxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->TxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->TxBuf.Size + 4U) - (hi3c->pXferData->TxBuf.Size % 4U)); + } + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDWR, size_align_word); + } + } + + /* Check if DMA process is well started */ + if ((control_dma_status == HAL_OK) && (tx_dma_status == HAL_OK) && (rx_dma_status == HAL_OK)) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->ControlXferCount = 0U; + + /* Enable control DMA Request */ + LL_I3C_EnableDMAReq_Control(hi3c->Instance); + + /* Check if Rx counter different from zero */ + if (hi3c->RxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Enable Rx data DMA Request */ + LL_I3C_EnableDMAReq_RX(hi3c->Instance); + } + + /* Check if Tx counter different from zero */ + if (hi3c->TxXferCount != 0U) + { + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Enable Tx data DMA Request */ + LL_I3C_EnableDMAReq_TX(hi3c->Instance); + } + + /* Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmacr) == HAL_OK) + { + hi3c->hdmacr->XferCpltCallback = NULL; + hi3c->hdmacr->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmatx) == HAL_OK) + { + hi3c->hdmatx->XferCpltCallback = NULL; + hi3c->hdmatx->XferErrorCallback = NULL; + } + + /* Set callback to NULL if DMA started */ + if (HAL_DMA_Abort(hi3c->hdmarx) == HAL_OK) + { + hi3c->hdmarx->XferCpltCallback = NULL; + hi3c->hdmarx->XferErrorCallback = NULL; + } + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Controller assign dynamic address (send a broadcast ENTDAA CCC command) in polling mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param target_payload : [IN/OUT] Pointer to the returned target payload value. + * @param dynOption : [IN] Parameter indicates the Dynamic address assignment option. + * It can be one value of @ref I3C_DYNAMIC_ADDRESS_OPTION_DEFINITION. + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_DynAddrAssign(I3C_HandleTypeDef *hi3c, + uint64_t *target_payload, + uint32_t dynOption, + uint32_t timeout) +{ + uint32_t tickstart; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on parameters */ + assert_param(IS_I3C_ENTDAA_OPTION(dynOption)); + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + if (target_payload == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Launch a RSTDAA procedure before launch ENTDAA */ + if ((dynOption == I3C_RSTDAA_THEN_ENTDAA) && + ((handle_state == HAL_I3C_STATE_READY) || (handle_state == HAL_I3C_STATE_LISTEN))) + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_DAA; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Enable arbitration header */ + LL_I3C_EnableArbitrationHeader(hi3c->Instance); + + /* Write CCC information in the control register */ + LL_I3C_ControllerHandleCCC(hi3c->Instance, I3C_BROADCAST_RSTDAA, 0U, LL_I3C_GENERATE_STOP); + + /* Wait Frame completion flag */ + status = I3C_WaitOnFlagUntilTimeout(hi3c, HAL_I3C_FLAG_FCF, RESET, timeout, tickstart); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + status = HAL_ERROR; + } + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + + if (status == HAL_OK) + { + /* check on the State */ + if ((handle_state == HAL_I3C_STATE_READY) || (handle_state == HAL_I3C_STATE_LISTEN) || + (handle_state == HAL_I3C_STATE_BUSY_DAA)) + { + /* Check on the state */ + if (handle_state != HAL_I3C_STATE_BUSY_DAA) + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_DAA; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Enable arbitration header */ + LL_I3C_EnableArbitrationHeader(hi3c->Instance); + + /* Write CCC information in the control register */ + LL_I3C_ControllerHandleCCC(hi3c->Instance, I3C_BROADCAST_ENTDAA, 0U, LL_I3C_GENERATE_STOP); + } + else + { + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + } + + /* Wait frame complete flag or TX FIFO not full flag until timeout */ + status = I3C_WaitOnDAAUntilTimeout(hi3c, timeout, tickstart); + + /* Check TX FIFO not full flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_TXFNFF) == SET) + { + /* Check on the Rx FIFO threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* For loop to get target payload */ + for (uint32_t index = 0U; index < 8U; index++) + { + /* Retrieve payload byte by byte */ + *target_payload |= (uint64_t)((uint64_t)LL_I3C_ReceiveData8(hi3c->Instance) << (index * 8U)); + } + } + else + { + /* Retrieve first 32 bits payload */ + *target_payload = (uint64_t)LL_I3C_ReceiveData32(hi3c->Instance); + + /* Retrieve second 32 bits payload */ + *target_payload |= (uint64_t)((uint64_t)LL_I3C_ReceiveData32(hi3c->Instance) << 32U); + } + + status = HAL_BUSY; + } + /* Check on frame complete flag */ + else + { + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + } + } + + return status; +} + +/** + * @brief Controller assign dynamic address (send a broadcast ENTDAA CCC command) in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param dynOption : [IN] Parameter indicates the Dynamic address assignment option. + * It can be one value of @ref I3C_DYNAMIC_ADDRESS_OPTION_DEFINITION. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_DynAddrAssign_IT(I3C_HandleTypeDef *hi3c, uint32_t dynOption) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on parameters */ + assert_param(IS_I3C_ENTDAA_OPTION(dynOption)); + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_DAA; + hi3c->XferISR = I3C_Ctrl_DAA_ISR; + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Dynamic Address Assignment process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_DAA_IT); + + /* Enable arbitration header */ + LL_I3C_EnableArbitrationHeader(hi3c->Instance); + + /* Launch a RSTDAA procedure before launch ENTDAA */ + if (dynOption == I3C_RSTDAA_THEN_ENTDAA) + { + /* Write RSTDAA CCC information in the control register */ + LL_I3C_ControllerHandleCCC(hi3c->Instance, I3C_BROADCAST_RSTDAA, 0U, LL_I3C_GENERATE_RESTART); + } + else + { + /* Write ENTDAA CCC information in the control register */ + LL_I3C_ControllerHandleCCC(hi3c->Instance, I3C_BROADCAST_ENTDAA, 0U, LL_I3C_GENERATE_STOP); + } + } + } + + return status; +} + +/** + * @brief Controller set dynamic address. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param devAddress : [IN] Value of the dynamic address to be assigned. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_SetDynAddr(I3C_HandleTypeDef *hi3c, uint8_t devAddress) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check if Tx FIFO requests data */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_TXFNFF) == SET) + { + /* Write device address in the TDR register */ + LL_I3C_TransmitData8(hi3c->Instance, devAddress); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Check if I3C target device is ready for communication. + * @param hi3c : [IN] Pointer to a I3C_HandleTypeDef structure that contains + * the configuration information for the specified I3C. + * @param devAddress : [IN] Value of the device dynamic address. + * @param trials : [IN] Number of trials + * @param timeout : [IN] Timeout duration + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_IsDeviceI3C_Ready(I3C_HandleTypeDef *hi3c, + uint8_t devAddress, + uint32_t trials, + uint32_t timeout) +{ + I3C_DeviceTypeDef device; + HAL_StatusTypeDef status; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Initiate a device address */ + device.Address = devAddress; + + /* Initiate a message type */ + device.MessageType = LL_I3C_CONTROLLER_MTYPE_PRIVATE; + + /* Check if the device is ready*/ + status = I3C_Ctrl_IsDevice_Ready(hi3c, &device, trials, timeout); + } + + return status; +} + +/** + * @brief Check if I2C target device is ready for communication. + * @param hi3c : [IN] Pointer to a I3C_HandleTypeDef structure that contains + * the configuration information for the specified I3C. + * @param devAddress : [IN] Value of the device dynamic address. + * @param trials : [IN] Number of trials + * @param timeout : [IN] Timeout duration + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Ctrl_IsDeviceI2C_Ready(I3C_HandleTypeDef *hi3c, + uint8_t devAddress, + uint32_t trials, + uint32_t timeout) +{ + I3C_DeviceTypeDef device; + HAL_StatusTypeDef status; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Initiate a device address */ + device.Address = devAddress; + + /* Initiate a message type */ + device.MessageType = LL_I3C_CONTROLLER_MTYPE_LEGACY_I2C; + + /* Check if the device is ready*/ + status = I3C_Ctrl_IsDevice_Ready(hi3c, &device, trials, timeout); + } + + return status; +} +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group6 Target operational functions. + * @brief I3C target operational functions. + * +@verbatim + ======================================================================================================================= + ##### Target operational functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to manage target I3C operation. + + (+) Call the function HAL_I3C_Tgt_Transmit() to transmit private data in polling mode. + (+) Call the function HAL_I3C_Tgt_Transmit_IT() to transmit private data in interrupt mode. + (+) Call the function HAL_I3C_Tgt_Transmit_DMA() to transmit private data in DMA mode. + (+) Call the function HAL_I3C_Tgt_Receive() to receive private data in polling mode. + (+) Call the function HAL_I3C_Tgt_Receive_IT() to receive private data in interrupt mode. + (+) Call the function HAL_I3C_Tgt_Receive_DMA() to receive private data in DMA mode. + (+) Call the function HAL_I3C_Tgt_ControlRoleReq() to send a control-role request in polling mode. + (+) Call the function HAL_I3C_Tgt_ControlRoleReq_IT() to send a control-role request in interrupt mode. + (+) Call the function HAL_I3C_Tgt_HotJoinReq() to send a Hot-Join request in polling mode. + (+) Call the function HAL_I3C_Tgt_HotJoinReq_IT() to send a Hot-Join request in interrupt mode. + (+) Call the function HAL_I3C_Tgt_IBIReq() to send an IBI request in polling mode. + (+) Call the function HAL_I3C_Tgt_IBIReq_IT() to send an IBI request in interrupt mode. + + (+) Those functions are called only when mode is Target. + +@endverbatim + * @{ + */ + +/** + * @brief Target transmit private data in polling mode. + * @note Target FIFO preload data is forced within this API for timing purpose. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * information (Pointer to the Tx buffer (TxBuf.pBuffer) and size of data + * to transmit in bytes (TxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, uint32_t timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->TxBuf.pBuffer == NULL) || (pXferData->TxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF or GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + hi3c->TxXferCount = pXferData->TxBuf.Size; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Set Preload information */ + LL_I3C_ConfigTxPreload(hi3c->Instance, (uint16_t)hi3c->pXferData->TxBuf.Size); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + /* Call transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + + /* Check for the Timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + /* Exit loop on Frame complete or error flags */ + } while ((READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)) == 0U); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check if all data bytes are transmitted */ + if ((LL_I3C_GetXferDataCount(hi3c->Instance) != hi3c->pXferData->TxBuf.Size) && (status == HAL_OK)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + status = HAL_ERROR; + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update returned status value */ + status = HAL_ERROR; + } + + /* At the end of Tx process update state to Previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Target transmit private data in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * information (Pointer to the Tx buffer (TxBuf.pBuffer) and size of data + * to transmit in bytes (TxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit_IT(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->TxBuf.pBuffer == NULL) || (pXferData->TxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF and GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + hi3c->TxXferCount = pXferData->TxBuf.Size; + hi3c->XferISR = I3C_Tgt_Tx_ISR; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrTxFunc = &I3C_TransmitWordTreatment; + } + + /* Set Preload information */ + LL_I3C_ConfigTxPreload(hi3c->Instance, (uint16_t)hi3c->pXferData->TxBuf.Size); + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_TX_IT); + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Target transmit private data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required transmission buffers + * information (Pointer to the Tx buffer (TxBuf.pBuffer) and size of data + * to transmit in bytes (TxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Transmit_DMA(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef tx_dma_status; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->TxBuf.pBuffer == NULL) || (pXferData->TxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmatx handle */ + else if (hi3c->hdmatx == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF and GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_TX; + hi3c->pXferData = pXferData; + hi3c->TxXferCount = pXferData->TxBuf.Size; + hi3c->XferISR = I3C_Tgt_Tx_DMA_ISR; + + /* Set Preload information */ + LL_I3C_ConfigTxPreload(hi3c->Instance, (uint16_t)hi3c->pXferData->TxBuf.Size); + + /*------------------------------------ I3C DMA channel for the Tx Data -----------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmatx->XferCpltCallback = I3C_DMADataTransmitCplt; + + /* Set the DMA error callback */ + hi3c->hdmatx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmatx->XferHalfCpltCallback = NULL; + hi3c->hdmatx->XferAbortCallback = NULL; + + /* Check on the Tx threshold to know the Tx treatment process : byte or word */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDR, hi3c->pXferData->TxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmatx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmatx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->TxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->TxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->TxBuf.Size + 4U) - (hi3c->pXferData->TxBuf.Size % 4U)); + } + + /* Enable the Tx data DMA channel */ + tx_dma_status = HAL_DMA_Start_IT(hi3c->hdmatx, (uint32_t)hi3c->pXferData->TxBuf.pBuffer, + (uint32_t)&hi3c->Instance->TDWR, size_align_word); + } + + /* Check if DMA process is well started */ + if (tx_dma_status == HAL_OK) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Tx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Enable Tx data DMA Request */ + LL_I3C_EnableDMAReq_TX(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + hi3c->hdmatx->XferCpltCallback = NULL; + hi3c->hdmatx->XferErrorCallback = NULL; + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Target receive private data in polling mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * information (Pointer to the Rx buffer (RxBuf.pBuffer) and size of data + * to be received in bytes (RxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Receive(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData, uint32_t timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL) || (pXferData->RxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF and GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = pXferData->RxBuf.Size; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Do while until FC (Frame Complete) is set or timeout */ + do + { + if (hi3c->RxXferCount > 0U) + { + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + } + + /* Check for the Timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + /* Exit loop on Frame complete or error flags */ + } while ((READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)) == 0U); + + /* Clear frame complete flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_FCF) == SET) + { + LL_I3C_ClearFlag_FC(hi3c->Instance); + } + + /* Check if all data bytes are received */ + if ((LL_I3C_GetXferDataCount(hi3c->Instance) != hi3c->pXferData->RxBuf.Size) && (status == HAL_OK)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + status = HAL_ERROR; + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + status = HAL_ERROR; + } + + /* At the end of Rx process update state to previous state */ + I3C_StateUpdate(hi3c); + } + } + + return status; +} + +/** + * @brief Target receive private data in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * information (Pointer to the Rx buffer (RxBuf.pBuffer) and size of data + * to be received in bytes (RxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Receive_IT(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL) || (pXferData->RxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF and GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = pXferData->RxBuf.Size; + hi3c->XferISR = I3C_Tgt_Rx_ISR; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* Set byte treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveByteTreatment; + } + else + { + /* Set word treatment function pointer */ + hi3c->ptrRxFunc = &I3C_ReceiveWordTreatment; + } + + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_RX_IT); + } + } + + return status; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Target receive private data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param pXferData : [IN] Pointer to an I3C_XferTypeDef structure that contains required reception buffers + * information (Pointer to the Rx buffer (RxBuf.pBuffer) and size of data + * to be received in bytes (RxBuf.Size)). + * This value contain transfer data after called @ref HAL_I3C_AddDescToFrame(). + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_Receive_DMA(I3C_HandleTypeDef *hi3c, I3C_XferTypeDef *pXferData) +{ + HAL_StatusTypeDef rx_dma_status; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + uint32_t size_align_word; + uint32_t it_source; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + it_source = READ_REG(hi3c->Instance->IER); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on user parameters */ + if ((pXferData == NULL) || (pXferData->RxBuf.pBuffer == NULL) || (pXferData->RxBuf.Size == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on hdmarx handle */ + else if (hi3c->hdmarx == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DMA_PARAM; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + /* check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* check if DEF and GRP CCC notifications are enabled */ + else if ((I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_DEFIE) != RESET) || + (I3C_CHECK_IT_SOURCE(it_source, HAL_I3C_IT_GRPIE) != RESET)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY_RX; + hi3c->pXferData = pXferData; + hi3c->RxXferCount = pXferData->RxBuf.Size; + hi3c->XferISR = I3C_Tgt_Rx_DMA_ISR; + + /*------------------------------------ I3C DMA channel for the Rx Data ---------------------------------------*/ + /* Set the I3C DMA transfer complete callback */ + hi3c->hdmarx->XferCpltCallback = I3C_DMADataReceiveCplt; + + /* Set the DMA error callback */ + hi3c->hdmarx->XferErrorCallback = I3C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi3c->hdmarx->XferHalfCpltCallback = NULL; + hi3c->hdmarx->XferAbortCallback = NULL; + + /* Check on the Rx threshold to know the Rx treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* assert that DMA source and destination width are configured in byte */ + assert_param(IS_I3C_DMASOURCEBYTE_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONBYTE_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, hi3c->pXferData->RxBuf.Size); + } + else + { + /* assert that DMA source and destination width are configured in word */ + assert_param(IS_I3C_DMASOURCEWORD_VALUE(hi3c->hdmarx->Init.SrcDataWidth)); + assert_param(IS_I3C_DMADESTINATIONWORD_VALUE(hi3c->hdmarx->Init.DestDataWidth)); + + /* Check to align data size in words */ + if ((hi3c->pXferData->RxBuf.Size % 4U) == 0U) + { + /* Keep the same size */ + size_align_word = hi3c->pXferData->RxBuf.Size; + } + else + { + /* Modify size to be multiple of 4 */ + size_align_word = ((hi3c->pXferData->RxBuf.Size + 4U) - (hi3c->pXferData->RxBuf.Size % 4U)); + } + + /* Enable the Rx data DMA channel */ + rx_dma_status = HAL_DMA_Start_IT(hi3c->hdmarx, (uint32_t)&hi3c->Instance->RDWR, + (uint32_t)hi3c->pXferData->RxBuf.pBuffer, size_align_word); + } + + if (rx_dma_status == HAL_OK) + { + /* Note : The I3C interrupts must be enabled after unlocking current process to avoid the risk + of I3C interrupt handle execution before current process unlock */ + + /* Enable Rx process interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Enable Rx data DMA Request */ + LL_I3C_EnableDMAReq_RX(hi3c->Instance); + } + else + { + /* Set callback to NULL if DMA started */ + hi3c->hdmarx->XferCpltCallback = NULL; + hi3c->hdmarx->XferErrorCallback = NULL; + + hi3c->ErrorCode = HAL_I3C_ERROR_DMA; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Target send control role request in polling mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_ControlRoleReq(I3C_HandleTypeDef *hi3c, uint32_t timeout) +{ + uint32_t tickstart; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Verify if control role request feature is enabled */ + if (LL_I3C_IsEnabledControllerRoleReq(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Request Controllership */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_CONTROLLER_ROLE_REQ, 0U); + + /* Wait Controllership completion confirmation flag */ + status = I3C_WaitOnFlagUntilTimeout(hi3c, HAL_I3C_FLAG_CRUPDF, RESET, timeout, tickstart); + + /* Clear Control role request flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_CRUPDF) == SET) + { + LL_I3C_ClearFlag_CRUPD(hi3c->Instance); + } + + /* Check on error flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + + status = HAL_ERROR; + } + else + { + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + } + } + } + + return status; +} + +/** + * @brief Target send control role request in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_ControlRoleReq_IT(I3C_HandleTypeDef *hi3c) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Verify if control role request feature is enabled */ + if (LL_I3C_IsEnabledControllerRoleReq(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Update handle parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + hi3c->XferISR = I3C_Tgt_CtrlRole_ISR; + + /* Enable controller-role update and error interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_CTRLROLE); + + /* Request Controllership */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_CONTROLLER_ROLE_REQ, 0U); + } + } + + return status; +} + +/** + * @brief Target send hot join request in polling mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pAddress : [IN/OUT] Pointer to the target own dynamic address assigned by the controller. + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_HotJoinReq(I3C_HandleTypeDef *hi3c, uint8_t *pAddress, uint32_t timeout) +{ + uint32_t tickstart; + HAL_I3C_StateTypeDef handle_state; + uint32_t valid_dynamic_address; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on the pAddress value */ + if (pAddress == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check on the Mode */ + else if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Check on the hot join request feature */ + if (LL_I3C_IsEnabledHotJoin(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Request hot join */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_HOT_JOIN, 0U); + + /* Wait hot join completion confirmation flag */ + status = I3C_WaitOnFlagUntilTimeout(hi3c, HAL_I3C_FLAG_DAUPDF, RESET, timeout, tickstart); + + /* Clear dynamic address update flag */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_DAUPDF) == SET) + { + LL_I3C_ClearFlag_DAUPD(hi3c->Instance); + } + + /* Get dynamic address validity flag */ + valid_dynamic_address = LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance); + + /* Check the validity of the own dynamic address */ + if (valid_dynamic_address == 0U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_DYNAMIC_ADDR; + status = HAL_ERROR; + + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + } + /* Check on error flag */ + else if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + + status = HAL_ERROR; + } + else + { + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + + /* Get assigned dynamic address */ + *pAddress = LL_I3C_GetOwnDynamicAddress(hi3c->Instance); + } + } + } + + return status; +} + +/** + * @brief Target send hot join request in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_HotJoinReq_IT(I3C_HandleTypeDef *hi3c) +{ + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* Check on the hot join request feature */ + else if (LL_I3C_IsEnabledHotJoin(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Update handle parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + hi3c->XferISR = I3C_Tgt_HotJoin_ISR; + + /* Enable dynamic address update and error interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_HOTJOIN); + + /* Request hot join */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_HOT_JOIN, 0U); + } + } + + return status; +} + +/** + * @brief Target send IBI request in polling mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pPayload : [IN] Pointer to the buffer contains the payload data. + * @param payloadSize : [IN] Payload buffer size in bytes. + * @param timeout : [IN] Timeout duration in millisecond. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_IBIReq(I3C_HandleTypeDef *hi3c, const uint8_t *pPayload, + uint8_t payloadSize, uint32_t timeout) +{ + uint32_t tickstart; + uint32_t payload_value = 0U; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Verify if IBI request feature is enabled*/ + if ((LL_I3C_IsEnabledIBI(hi3c->Instance) != 1U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Update handle parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Check on the IBI additional data */ + if (LL_I3C_GetDeviceIBIPayload(hi3c->Instance) == LL_I3C_IBI_ADDITIONAL_DATA) + { + /* Check on the pPayload and payloadSize values */ + if ((pPayload == NULL) || (payloadSize == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + else + { + /* For loop to calculate the payload value */ + for (uint32_t index = 0U; index < payloadSize; index++) + { + payload_value |= ((uint32_t)pPayload[index] << (index * 8U)); + } + + /* Load IBI payload data */ + LL_I3C_SetIBIPayload(hi3c->Instance, payload_value); + } + } + + if (status == HAL_OK) + { + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Request IBI */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_IBI, payloadSize); + + /* Wait IBI completion confirmation flag */ + status = I3C_WaitOnFlagUntilTimeout(hi3c, HAL_I3C_FLAG_IBIENDF, RESET, timeout, tickstart); + + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_IBIENDF) == SET) + { + /* Clear IBI end process flag */ + LL_I3C_ClearFlag_IBIEND(hi3c->Instance); + } + + /* Check on error flag value */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + + status = HAL_ERROR; + } + else + { + /* Update handle state parameter to previous state */ + I3C_StateUpdate(hi3c); + } + } + } + } + + return status; +} + +/** + * @brief Target send IBI request in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param pPayload : [IN] Pointer to the buffer contains the payload data. + * @param payloadSize : [IN] Payload buffer size in bytes. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Tgt_IBIReq_IT(I3C_HandleTypeDef *hi3c, const uint8_t *pPayload, uint8_t payloadSize) +{ + uint32_t payload_value = 0U; + HAL_I3C_StateTypeDef handle_state; + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check the instance and the mode parameters */ + assert_param(IS_I3C_ALL_INSTANCE(hi3c->Instance)); + assert_param(IS_I3C_MODE(hi3c->Mode)); + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* Check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_TARGET) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + /* Verify the dynamic address validity */ + else if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Verify if IBI request feature is enabled */ + if (LL_I3C_IsEnabledIBI(hi3c->Instance) != 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Update handle parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + hi3c->XferISR = I3C_Tgt_IBI_ISR; + + /* Check on the IBI additional data */ + if (LL_I3C_GetDeviceIBIPayload(hi3c->Instance) == LL_I3C_IBI_ADDITIONAL_DATA) + { + /* Check on the pPayload and payloadSize values */ + if ((pPayload == NULL) || (payloadSize == 0U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + } + else + { + /* For loop to calculate the payload value */ + for (uint32_t index = 0U; index < payloadSize; index++) + { + payload_value |= ((uint32_t)pPayload[index] << (index * 8U)); + } + + /* Load IBI payload data */ + LL_I3C_SetIBIPayload(hi3c->Instance, payload_value); + } + } + + /* Enable IBI end and error interrupts */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_IBI); + + /* Request IBI */ + LL_I3C_TargetHandleMessage(hi3c->Instance, LL_I3C_TARGET_MTYPE_IBI, payloadSize); + } + } + + return status; +} +/** + * @} + */ + +/** @defgroup I3C_Exported_Functions_Group7 Generic and Common functions. + * @brief I3C generic and common functions. + * +@verbatim + ======================================================================================================================= + ##### Generic and Common functions ##### + ======================================================================================================================= + [..] This subsection provides a set of functions allowing to Abort transfer or to get in run-time the status + of the peripheral. + + (+) Call the function HAL_I3C_Abort_IT() to abort the current transfer either in DMA or IT. + (+) Call the function HAL_I3C_GetState() to get the I3C handle state. + (+) Call the function HAL_I3C_GetMode() to get the I3C handle mode. + (+) Call the function HAL_I3C_GetError() to get the error code. + +@endverbatim + * @{ + */ + +/** + * @brief Abort an I3C IT or DMA process communication with Interrupt. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Abort_IT(I3C_HandleTypeDef *hi3c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + if (hi3c->State != HAL_I3C_STATE_ABORT) + { + /* Set State at HAL_I3C_STATE_ABORT */ + hi3c->State = HAL_I3C_STATE_ABORT; + + /* Disable Error Interrupts */ + __HAL_I3C_DISABLE_IT(hi3c, HAL_I3C_IT_ERRIE); + + hi3c->XferISR = I3C_Abort_ISR; + + /* Flush the different Fifos to generate an automatic stop mode link to underflow or overflow detection timeout */ + /* Flush the content of Tx Fifo */ + LL_I3C_RequestTxFIFOFlush(hi3c->Instance); + + /* Flush the content of Rx Fifo */ + LL_I3C_RequestRxFIFOFlush(hi3c->Instance); + + /* Check on the I3C mode: Control and status FIFOs available only with controller mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Flush the content of Control Fifo */ + LL_I3C_RequestControlFIFOFlush(hi3c->Instance); + + /* Flush the content of Status Fifo */ + LL_I3C_RequestStatusFIFOFlush(hi3c->Instance); + } + + /* Disable all DMA Requests */ + LL_I3C_DisableDMAReq_Control(hi3c->Instance); + LL_I3C_DisableDMAReq_RX(hi3c->Instance); + LL_I3C_DisableDMAReq_TX(hi3c->Instance); + LL_I3C_DisableDMAReq_Status(hi3c->Instance); + + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Note : The I3C interrupts must be enabled after unlocking current process + to avoid the risk of I3C interrupt handle execution before current + process unlock */ + I3C_Enable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_CCC_IT); + } + else + { + /* Note : The I3C interrupts must be enabled after unlocking current process + to avoid the risk of I3C interrupt handle execution before current + process unlock */ + I3C_Enable_IRQ(hi3c, I3C_XFER_TARGET_RX_IT); + } + } + else + { + return HAL_BUSY; + } + } + + return status; +} + +/** + * @brief Return the I3C handle state. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval HAL State : [OUT] Value from HAL_I3C_StateTypeDef enumeration. + */ +HAL_I3C_StateTypeDef HAL_I3C_GetState(const I3C_HandleTypeDef *hi3c) +{ + return hi3c->State; +} + +/** + * @brief Returns the I3C handle mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval HAL Mode : [OUT] Value from HAL_I3C_ModeTypeDef enumeration. + */ +HAL_I3C_ModeTypeDef HAL_I3C_GetMode(const I3C_HandleTypeDef *hi3c) +{ + return hi3c->Mode; +} + +/** + * @brief Return the I3C error code. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval I3C Error Code : [OUT] Value from @ref I3C_ERROR_CODE_DEFINITION. + */ +uint32_t HAL_I3C_GetError(const I3C_HandleTypeDef *hi3c) +{ + return hi3c->ErrorCode; +} + +/** + * @brief Target/Controller Get Common Command Code Information updated after event. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param notifyId : [IN] Parameter indicates which notification is signaled. + * It can be a combination of value of @ref HAL_I3C_Notification_ID_definition. + * @param pCCCInfo : [IN/OUT] Pointer to an I3C_CCCInfoTypeDef structure that contains the CCC information + * updated after CCC event. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_GetCCCInfo(I3C_HandleTypeDef *hi3c, + uint32_t notifyId, + I3C_CCCInfoTypeDef *pCCCInfo) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check on user parameters */ + if (pCCCInfo == NULL) + { + /* Update handle error code parameter */ + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + /* Check the I3C state */ + else if (hi3c->State == HAL_I3C_STATE_RESET) + { + /* Update handle error code parameter */ + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + else + { + /* Retrieve Target Dynamic Address value and Validity (target/controller) */ + if ((notifyId & EVENT_ID_DAU) == EVENT_ID_DAU) + { + pCCCInfo->DynamicAddrValid = LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance); + pCCCInfo->DynamicAddr = LL_I3C_GetOwnDynamicAddress(hi3c->Instance); + } + + /* Retrieve Maximum Write Data Length (target) */ + if ((notifyId & EVENT_ID_SETMWL) == EVENT_ID_SETMWL) + { + pCCCInfo->MaxWriteLength = LL_I3C_GetMaxWriteLength(hi3c->Instance); + } + + /* Retrieve Maximum Read Data Length (target) */ + if ((notifyId & EVENT_ID_SETMRL) == EVENT_ID_SETMRL) + { + pCCCInfo->MaxReadLength = LL_I3C_GetMaxReadLength(hi3c->Instance); + } + + /* Retrieve Reset Action/Level on received reset pattern (target) */ + if ((notifyId & EVENT_ID_RSTACT) == EVENT_ID_RSTACT) + { + pCCCInfo->ResetAction = LL_I3C_GetResetAction(hi3c->Instance); + } + + /* Retrieve Activity State (target) */ + if ((notifyId & EVENT_ID_ENTASx) == EVENT_ID_ENTASx) + { + pCCCInfo->ActivityState = LL_I3C_GetActivityState(hi3c->Instance); + } + + /* Retrieve Interrupt allowed status (target) */ + if ((notifyId & EVENT_ID_ENEC_DISEC) == EVENT_ID_ENEC_DISEC) + { + pCCCInfo->HotJoinAllowed = LL_I3C_IsEnabledHotJoin(hi3c->Instance); + pCCCInfo->InBandAllowed = LL_I3C_IsEnabledIBI(hi3c->Instance); + pCCCInfo->CtrlRoleAllowed = LL_I3C_IsEnabledControllerRoleReq(hi3c->Instance); + } + + /* Retrieve In Band Interrupt information (controller) */ + if ((notifyId & EVENT_ID_IBI) == EVENT_ID_IBI) + { + pCCCInfo->IBICRTgtAddr = LL_I3C_GetIBITargetAddr(hi3c->Instance); + pCCCInfo->IBITgtNbPayload = LL_I3C_GetNbIBIAddData(hi3c->Instance); + pCCCInfo->IBITgtPayload = LL_I3C_GetIBIPayload(hi3c->Instance); + } + + /* Retrieve Controller role request Interrupt information (controller) */ + if ((notifyId & EVENT_ID_CR) == EVENT_ID_CR) + { + pCCCInfo->IBICRTgtAddr = LL_I3C_GetIBITargetAddr(hi3c->Instance); + } + } + } + + return status; +} + +/** + * @brief Get BCR, DCR and PID information after ENTDAA. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param ENTDAA_payload :[IN] Payload received after ENTDAA + * @param pENTDAA_payload :[OUT] Pointer to an I3C_ENTDAAPayloadTypeDef structure that contains the BCR, DCR and PID + * information. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +HAL_StatusTypeDef HAL_I3C_Get_ENTDAA_Payload_Info(I3C_HandleTypeDef *hi3c, + uint64_t ENTDAA_payload, + I3C_ENTDAAPayloadTypeDef *pENTDAA_payload) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t BCR; + uint64_t PID; + + /* check on the handle */ + if (hi3c == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check on user parameters */ + if (pENTDAA_payload == NULL) + { + /* Update handle error code parameter */ + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Get Bus Characterics */ + BCR = __HAL_I3C_GET_BCR(ENTDAA_payload); + + /* Retrieve BCR information */ + pENTDAA_payload->BCR.IBIPayload = __HAL_I3C_GET_IBI_PAYLOAD(BCR); + pENTDAA_payload->BCR.IBIRequestCapable = __HAL_I3C_GET_IBI_CAPABLE(BCR); + pENTDAA_payload->BCR.DeviceRole = __HAL_I3C_GET_CR_CAPABLE(BCR); + pENTDAA_payload->BCR.AdvancedCapabilities = I3C_GET_ADVANCED_CAPABLE(BCR); + pENTDAA_payload->BCR.OfflineCapable = I3C_GET_OFFLINE_CAPABLE(BCR); + pENTDAA_payload->BCR.VirtualTargetSupport = I3C_GET_VIRTUAL_TGT(BCR); + pENTDAA_payload->BCR.MaxDataSpeedLimitation = I3C_GET_MAX_DATA_SPEED_LIMIT(BCR); + + /* Get Device Characterics */ + pENTDAA_payload->DCR = I3C_GET_DCR(ENTDAA_payload); + + /* Get Provisioned ID */ + PID = I3C_GET_PID(ENTDAA_payload); + + /* Change PID from BigEndian to litlleEndian */ + PID = (uint64_t)((((uint64_t)I3C_BIG_TO_LITTLE_ENDIAN((uint32_t) PID) << 32) | + ((uint64_t)I3C_BIG_TO_LITTLE_ENDIAN((uint32_t)(PID >> 32)))) >> 16); + + /* Retrieve PID information*/ + pENTDAA_payload->PID.MIPIMID = I3C_GET_MIPIMID(PID); + pENTDAA_payload->PID.IDTSEL = I3C_GET_IDTSEL(PID); + pENTDAA_payload->PID.PartID = I3C_GET_PART_ID(PID); + pENTDAA_payload->PID.MIPIID = I3C_GET_MIPIID(PID); + } + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_Private_Functions I3C Private Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handles target received events. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + uint32_t tmpevent = 0U; + + /* I3C Rx FIFO not empty interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, HAL_I3C_FLAG_RXFNEF) != RESET) + { + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + } + + /* I3C target complete controller-role hand-off procedure (direct GETACCR CCC) event management --------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRUPDF) != RESET) + { + /* Clear controller-role update flag */ + LL_I3C_ClearFlag_CRUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_GETACCCR */ + tmpevent |= EVENT_ID_GETACCCR; + } + + /* I3C target receive any direct GETxxx CCC event management -------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_GETF) != RESET) + { + /* Clear GETxxx CCC flag */ + LL_I3C_ClearFlag_GET(hi3c->Instance); + + /* Set Identifier EVENT_ID_GETx */ + tmpevent |= EVENT_ID_GETx; + } + + /* I3C target receive get status command (direct GETSTATUS CCC) event management -----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_STAF) != RESET) + { + /* Clear GETSTATUS CCC flag */ + LL_I3C_ClearFlag_STA(hi3c->Instance); + + /* Set Identifier EVENT_ID_GETSTATUS */ + tmpevent |= EVENT_ID_GETSTATUS; + } + + /* I3C target receive a dynamic address update (ENTDAA/RSTDAA/SETNEWDA CCC) event management -----------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_DAUPDF) != RESET) + { + /* Clear dynamic address update flag */ + LL_I3C_ClearFlag_DAUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_DAU */ + tmpevent |= EVENT_ID_DAU; + } + + /* I3C target receive maximum write length update (direct SETMWL CCC) event management -----------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_MWLUPDF) != RESET) + { + /* Clear SETMWL CCC flag */ + LL_I3C_ClearFlag_MWLUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_SETMWL */ + tmpevent |= EVENT_ID_SETMWL; + } + + /* I3C target receive maximum read length update(direct SETMRL CCC) event management -------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_MRLUPDF) != RESET) + { + /* Clear SETMRL CCC flag */ + LL_I3C_ClearFlag_MRLUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_SETMRL */ + tmpevent |= EVENT_ID_SETMRL; + } + + /* I3C target detect reset pattern (broadcast or direct RSTACT CCC) event management -------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_RSTF) != RESET) + { + /* Clear reset pattern flag */ + LL_I3C_ClearFlag_RST(hi3c->Instance); + + /* Set Identifier EVENT_ID_RSTACT */ + tmpevent |= EVENT_ID_RSTACT; + } + + /* I3C target receive activity state update (direct or broadcast ENTASx) CCC event management ----------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_ASUPDF) != RESET) + { + /* Clear ENTASx CCC flag */ + LL_I3C_ClearFlag_ASUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_ENTASx */ + tmpevent |= EVENT_ID_ENTASx; + } + + /* I3C target receive a direct or broadcast ENEC/DISEC CCC event management ----------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_INTUPDF) != RESET) + { + /* Clear ENEC/DISEC CCC flag */ + LL_I3C_ClearFlag_INTUPD(hi3c->Instance); + + /* Set Identifier EVENT_ID_ENEC_DISEC */ + tmpevent |= EVENT_ID_ENEC_DISEC; + } + + /* I3C target receive a broadcast DEFTGTS CCC event management -----------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_DEFF) != RESET) + { + /* Clear DEFTGTS CCC flag */ + LL_I3C_ClearFlag_DEF(hi3c->Instance); + + /* Set Identifier EVENT_ID_DEFTGTS */ + tmpevent |= EVENT_ID_DEFTGTS; + } + + /* I3C target receive a group addressing (broadcast DEFGRPA CCC) event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_GRPF) != RESET) + { + /* Clear DEFGRPA CCC flag */ + LL_I3C_ClearFlag_GRP(hi3c->Instance); + + /* Set Identifier EVENT_ID_DEFGRPA */ + tmpevent |= EVENT_ID_DEFGRPA; + } + + /* I3C target wakeup event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_WKPF) != RESET) + { + /* Clear WKP flag */ + LL_I3C_ClearFlag_WKP(hi3c->Instance); + + /* Set Identifier EVENT_ID_WKP */ + tmpevent |= EVENT_ID_WKP; + } + + if (tmpevent != 0U) + { +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, tmpevent); +#else + /* Asynchronous receive CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, tmpevent); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles Controller received events. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C controller receive IBI event management ---------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_IBIF) != RESET) + { + /* Clear IBI request flag */ + LL_I3C_ClearFlag_IBI(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_IBI); +#else + /* Asynchronous IBI event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_IBI); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller controller-role request event management ---------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRF) != RESET) + { + /* Clear controller-role request flag */ + LL_I3C_ClearFlag_CR(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_CR); +#else + /* Asynchronous controller-role event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_CR); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller hot-join event management ------------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_HJF) != RESET) + { + /* Clear hot-join flag */ + LL_I3C_ClearFlag_HJ(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_HJ); +#else + /* Asynchronous hot-join event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_HJ); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target hot join event. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_HotJoin_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C target receive a dynamic address update event management */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_DAUPDF) != RESET) + { + /* Clear dynamic address update flag */ + LL_I3C_ClearFlag_DAUPD(hi3c->Instance); + + /* Disable dynamic address update and error interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_TARGET_HOTJOIN); + + /* Check the validity of the own dynamic address */ + if (LL_I3C_IsEnabledOwnDynAddress(hi3c->Instance) == 1U) + { + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->TgtHotJoinCallback(hi3c, (uint8_t)LL_I3C_GetOwnDynamicAddress(hi3c->Instance)); +#else + /* Asynchronous receive ENTDAA/RSTDAA/SETNEWDA CCC event Callback */ + HAL_I3C_TgtHotJoinCallback(hi3c, (uint8_t)LL_I3C_GetOwnDynamicAddress(hi3c->Instance)); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_DYNAMIC_ADDR; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target control role event. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_CtrlRole_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C target complete controller-role hand-off procedure (direct GETACCR CCC) event management -------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRUPDF) != RESET) + { + /* Clear controller-role update flag */ + LL_I3C_ClearFlag_CRUPD(hi3c->Instance); + + /* Disable controller-role update and error interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_TARGET_CTRLROLE); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_GETACCCR); +#else + /* Asynchronous receive GETACCR CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_GETACCCR); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target IBI event. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_IBI_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C target IBI end process event management ---------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_IBIENDF) != RESET) + { + /* Clear IBI end flag */ + LL_I3C_ClearFlag_IBIEND(hi3c->Instance); + + /* Disable IBI end and error interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_TARGET_IBI); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_IBIEND); +#else + /* Asynchronous IBI end event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_IBIEND); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target transmit data in Interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_Tx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Tx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX) + { + /* I3C Tx FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_TXFNFF) != RESET) + { + if (hi3c->TxXferCount > 0U) + { + /* Call transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + } + + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Check if all data bytes are transmitted */ + if (LL_I3C_GetXferDataCount(hi3c->Instance) == hi3c->pXferData->TxBuf.Size) + { + /* Disable Tx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_TARGET_TX_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the transmit complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->TgtTxCpltCallback(hi3c); +#else + HAL_I3C_TgtTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + + /* I3C target wakeup event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_WKPF) != RESET) + { + /* Clear WKP flag */ + LL_I3C_ClearFlag_WKP(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_WKP); +#else + /* Asynchronous receive CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_WKP); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + } + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target receive data in Interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_Rx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that an Rx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_RX) + { + /* I3C Rx FIFO not empty interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, HAL_I3C_FLAG_RXFNEF) != RESET) + { + if (hi3c->RxXferCount > 0U) + { + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + } + } + + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Check if all data bytes are received */ + if (LL_I3C_GetXferDataCount(hi3c->Instance) == hi3c->pXferData->RxBuf.Size) + { + /* Disable Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_TARGET_RX_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the receive complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->TgtRxCpltCallback(hi3c); +#else + HAL_I3C_TgtRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + + /* I3C target wakeup event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_WKPF) != RESET) + { + /* Clear WKP flag */ + LL_I3C_ClearFlag_WKP(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_WKP); +#else + /* Asynchronous receive CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_WKP); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + } + + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Interrupt Sub-Routine which handles target transmit data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_Tx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Tx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX) + { + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Check if all data bytes are transmitted */ + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmatx) == 0U) + { + /* Disable Tx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Call target transmit complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->TgtTxCpltCallback(hi3c); +#else + HAL_I3C_TgtTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + + /* I3C target wakeup event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_WKPF) != RESET) + { + /* Clear WKP flag */ + LL_I3C_ClearFlag_WKP(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_WKP); +#else + /* Asynchronous receive CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_WKP); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + } + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles target receive data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Tgt_Rx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Rx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_RX) + { + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Check if all data bytes are received */ + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmarx) == 0U) + { + /* Disable Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Call target receive complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->TgtRxCpltCallback(hi3c); +#else + HAL_I3C_TgtRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + + /* I3C target wakeup event management ----------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_WKPF) != RESET) + { + /* Clear WKP flag */ + LL_I3C_ClearFlag_WKP(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_WKP); +#else + /* Asynchronous receive CCC event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_WKP); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + } + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Interrupt Sub-Routine which handles controller transmission in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Tx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Tx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX) + { + /* Check if Control FIFO requests data */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CFNFF) != RESET) + { + if (hi3c->ControlXferCount > 0U) + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + } + } + + /* I3C Tx FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_TXFNFF) != RESET) + { + if (hi3c->TxXferCount > 0U) + { + /* Call Transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + } + + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (hi3c->ControlXferCount == 0U) + { + /* Disable Tx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_TX_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the transmit complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlTxCpltCallback(hi3c); +#else + HAL_I3C_CtrlTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the transmit complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlTxCpltCallback(hi3c); +#else + HAL_I3C_CtrlTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + + } + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles controller reception in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Rx_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that an Rx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_RX) + { + /* Check if Control FIFO requests data */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CFNFF) != RESET) + { + if (hi3c->ControlXferCount > 0U) + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + } + } + + /* I3C Rx FIFO not empty interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, HAL_I3C_FLAG_RXFNEF) != RESET) + { + if (hi3c->RxXferCount > 0U) + { + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + } + } + + /* I3C Tx FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_TXFNFF) != RESET) + { + if (hi3c->TxXferCount > 0U) + { + /* Call Transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + } + + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (hi3c->ControlXferCount == 0U) + { + /* Disable Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_CCC_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the receive complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlRxCpltCallback(hi3c); +#else + HAL_I3C_CtrlRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the receive complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlRxCpltCallback(hi3c); +#else + HAL_I3C_CtrlRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles controller multiple transmission/reception in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Tx/Rx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX_RX) + { + /* Check if Control FIFO requests data */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CFNFF) != RESET) + { + if (hi3c->ControlXferCount > 0U) + { + /* Call control data treatment function */ + I3C_ControlDataTreatment(hi3c); + } + } + + /* I3C Tx FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_TXFNFF) != RESET) + { + if (hi3c->TxXferCount > 0U) + { + /* Call Transmit treatment function */ + hi3c->ptrTxFunc(hi3c); + } + } + + /* I3C Rx FIFO not empty interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, HAL_I3C_FLAG_RXFNEF) != RESET) + { + if (hi3c->RxXferCount > 0U) + { + /* Call receive treatment function */ + hi3c->ptrRxFunc(hi3c); + } + } + + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (hi3c->ControlXferCount == 0U) + { + /* Disable Tx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_TX_IT); + + /* Disable Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_CCC_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the transmit, receive complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlMultipleXferCpltCallback(hi3c); +#else + HAL_I3C_CtrlMultipleXferCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles controller transmission and Controller received events + * in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Tx_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C controller receive IBI event management ---------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_IBIF) != RESET) + { + /* Clear IBI request flag */ + LL_I3C_ClearFlag_IBI(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_IBI); +#else + /* Asynchronous IBI event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_IBI); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller controller-role request event management ---------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRF) != RESET) + { + /* Clear controller-role request flag */ + LL_I3C_ClearFlag_CR(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_CR); +#else + /* Asynchronous controller-role event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_CR); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller hot-join event management ------------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_HJF) != RESET) + { + /* Clear hot-join flag */ + LL_I3C_ClearFlag_HJ(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_HJ); +#else + /* Asynchronous hot-join event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_HJ); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* ISR controller transmission */ + return (I3C_Ctrl_Tx_ISR(hi3c, itMasks)); +} + +/** + * @brief Interrupt Sub-Routine which handles controller reception and Controller received events in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Rx_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C controller receive IBI event management ---------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_IBIF) != RESET) + { + /* Clear IBI request flag */ + LL_I3C_ClearFlag_IBI(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_IBI); +#else + /* Asynchronous IBI event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_IBI); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller controller-role request event management ---------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRF) != RESET) + { + /* Clear controller-role request flag */ + LL_I3C_ClearFlag_CR(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_CR); +#else + /* Asynchronous controller-role event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_CR); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller hot-join event management ------------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_HJF) != RESET) + { + /* Clear hot-join flag */ + LL_I3C_ClearFlag_HJ(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_HJ); +#else + /* Asynchronous hot-join event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_HJ); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* ISR controller reception */ + return (I3C_Ctrl_Rx_ISR(hi3c, itMasks)); +} + +/** + * @brief Interrupt Sub-Routine which handles controller multiple transmission/reception and + * Controller received eventsin interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_Listen_Event_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* I3C controller receive IBI event management ---------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_IBIF) != RESET) + { + /* Clear IBI request flag */ + LL_I3C_ClearFlag_IBI(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_IBI); +#else + /* Asynchronous IBI event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_IBI); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller controller-role request event management ---------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CRF) != RESET) + { + /* Clear controller-role request flag */ + LL_I3C_ClearFlag_CR(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_CR); +#else + /* Asynchronous controller-role event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_CR); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* I3C controller hot-join event management ------------------------------------------------------------------------*/ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_HJF) != RESET) + { + /* Clear hot-join flag */ + LL_I3C_ClearFlag_HJ(hi3c->Instance); + +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + /* Call registered callback */ + hi3c->NotifyCallback(hi3c, EVENT_ID_HJ); +#else + /* Asynchronous hot-join event Callback */ + HAL_I3C_NotifyCallback(hi3c, EVENT_ID_HJ); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + + /* ISR controller transmission/reception */ + return (I3C_Ctrl_Multiple_Xfer_ISR(hi3c, itMasks)); +} +/** + * @brief Interrupt Sub-Routine which handles controller CCC Dynamic Address Assignment command in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_DAA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + uint64_t target_payload = 0U; + + /* Check that a Dynamic Address Assignment process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_DAA) + { + /* I3C Control FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_CFNFF) != RESET) + { + /* Write ENTDAA CCC information in the control register */ + LL_I3C_ControllerHandleCCC(hi3c->Instance, I3C_BROADCAST_ENTDAA, 0U, LL_I3C_GENERATE_STOP); + } + + /* I3C Tx FIFO not full interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_TXFNFF) != RESET) + { + /* Check on the Rx FIFO threshold to know the Dynamic Address Assignment treatment process : byte or word */ + if (LL_I3C_GetRxFIFOThreshold(hi3c->Instance) == LL_I3C_RXFIFO_THRESHOLD_1_4) + { + /* For loop to get target payload */ + for (uint32_t index = 0U; index < 8U; index++) + { + /* Retrieve payload byte by byte */ + target_payload |= (uint64_t)((uint64_t)LL_I3C_ReceiveData8(hi3c->Instance) << (index * 8U)); + } + } + else + { + /* Retrieve first 32 bits payload */ + target_payload = (uint64_t)LL_I3C_ReceiveData32(hi3c->Instance); + + /* Retrieve second 32 bits payload */ + target_payload |= (uint64_t)((uint64_t)LL_I3C_ReceiveData32(hi3c->Instance) << 32U); + } + + /* Call the corresponding callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->TgtReqDynamicAddrCallback(hi3c, target_payload); +#else + HAL_I3C_TgtReqDynamicAddrCallback(hi3c, target_payload); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + } + + /* I3C frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Disable Dynamic Address Assignment process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_DAA_IT); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the Dynamic Address Assignment complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlDAACpltCallback(hi3c); +#else + HAL_I3C_CtrlDAACpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + } + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Interrupt Sub-Routine which handles controller transmit data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Tx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that a Tx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX) + { + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmacr) == 0U) + { + /* Check if all data bytes are transmitted */ + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmatx) == 0U) + { + /* Disable Tx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Call controller transmit complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlTxCpltCallback(hi3c); +#else + HAL_I3C_CtrlTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the transmit complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlTxCpltCallback(hi3c); +#else + HAL_I3C_CtrlTxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles controller receive data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Rx_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that an Rx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_RX) + { + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmacr) == 0U) + { + /* Check if all data bytes are received */ + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmarx) == 0U) + { + /* Disable Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Call controller receive complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlRxCpltCallback(hi3c); +#else + HAL_I3C_CtrlRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Call the receive complete callback */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlRxCpltCallback(hi3c); +#else + HAL_I3C_CtrlRxCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + } + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handles controller multiple receive and transmit data in DMA mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_Multiple_Xfer_DMA_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that an Rx or Tx process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_BUSY_TX_RX) + { + /* I3C target frame complete event Check */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmacr) == 0U) + { + /* Check if all data bytes are received or transmitted */ + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmarx) == 0U) + { + if (I3C_GET_DMA_REMAIN_DATA(hi3c->hdmatx) == 0U) + { + /* Disable transfer Tx/Rx process interrupts */ + I3C_Disable_IRQ(hi3c, I3C_XFER_DMA); + + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Update the number of remaining data bytes */ + hi3c->RxXferCount = 0U; + + /* Update the number of remaining data bytes */ + hi3c->TxXferCount = 0U; + + /* Call controller transmit, receive complete callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1U) + hi3c->CtrlMultipleXferCpltCallback(hi3c); +#else + HAL_I3C_CtrlMultipleXferCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS == 1U */ + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_SIZE; + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + else + { + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + + /* Then Initiate a Start condition */ + LL_I3C_RequestTransfer(hi3c->Instance); + } + } + } + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Interrupt Sub-Routine which handles abort process in interrupt mode. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration information + * for the specified I3C. + * @param itMasks : [IN] Flag Interrupt Masks flags to handle. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Abort_ISR(struct __I3C_HandleTypeDef *hi3c, uint32_t itMasks) +{ + /* Check that an Abort process is ongoing */ + if (hi3c->State == HAL_I3C_STATE_ABORT) + { + /* I3C Rx FIFO not empty interrupt Check */ + if (I3C_CHECK_FLAG(itMasks, HAL_I3C_FLAG_RXFNEF) != RESET) + { + if (LL_I3C_IsActiveFlag_DOVR(hi3c->Instance) == 1U) + { + /* Flush remaining Rx data */ + LL_I3C_RequestRxFIFOFlush(hi3c->Instance); + } + } + + /* I3C Abort frame complete event Check */ + /* Evenif abort is called, the Frame completion can arrive if abort is requested at the end of the processus */ + /* Evenif completion occurs, treat this end of processus as abort completion process */ + if (I3C_CHECK_FLAG(itMasks, I3C_EVR_FCF) != RESET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Call error treatment function */ + I3C_ErrorTreatment(hi3c); + } + } + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA I3C control transmit process complete callback. + * @param hdma : [IN] Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA channel. + * @retval None + */ +static void I3C_DMAControlTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Get the address of the I3C handle : Derogation MISRAC2012-Rule-11.5 */ + I3C_HandleTypeDef *hi3c = (I3C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable control DMA Request */ + LL_I3C_DisableDMAReq_Control(hi3c->Instance); +} + +/** + * @brief DMA I3C transmit data process complete callback. + * @param hdma : [IN] Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA channel. + * @retval None + */ +static void I3C_DMADataTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Get the address of the I3C handle : Derogation MISRAC2012-Rule-11.5 */ + I3C_HandleTypeDef *hi3c = (I3C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Tx DMA Request */ + LL_I3C_DisableDMAReq_TX(hi3c->Instance); +} + +/** + * @brief DMA I3C receive data process complete callback. + * @param hdma : [IN] Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA channel. + * @retval None + */ +static void I3C_DMADataReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Get the address of the I3C handle : Derogation MISRAC2012-Rule-11.5 */ + I3C_HandleTypeDef *hi3c = (I3C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Rx DMA Request */ + LL_I3C_DisableDMAReq_RX(hi3c->Instance); +} + +/** + * @brief DMA I3C communication error callback. + * @param hdma : [IN] Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA channel. + * @retval None + */ +static void I3C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Just to solve MisraC error then to be removed */ + /* Derogation MISRAC2012-Rule-11.5 */ + I3C_HandleTypeDef *hi3c = (I3C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + hi3c->ErrorCode |= HAL_I3C_ERROR_DMA; +} + +/** + * @brief DMA I3C communication abort callback to be called at end of DMA Abort procedure. + * @param hdma : [IN] Pointer to a DMA_HandleTypeDef structure that contains the configuration information + * for the specified DMA channel. + * @retval None + */ +static void I3C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I3C_HandleTypeDef *hi3c = (I3C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset Tx DMA AbortCpltCallback */ + if (hi3c->hdmatx != NULL) + { + hi3c->hdmatx->XferAbortCallback = NULL; + } + + /* Reset Rx DMA AbortCpltCallback */ + if (hi3c->hdmarx != NULL) + { + hi3c->hdmarx->XferAbortCallback = NULL; + } + + /* Reset control DMA AbortCpltCallback */ + if (hi3c->hdmacr != NULL) + { + hi3c->hdmacr->XferAbortCallback = NULL; + } + + I3C_TreatErrorCallback(hi3c); +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief This function handles I3C Communication Timeout. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param flag : [IN] Specifies the I3C flag to check. + * @param flagstatus : [IN] The new Flag status (SET or RESET). + * @param timeout : [IN] Timeout duration in millisecond. + * @param tickstart : [IN] Tick start value + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_WaitOnFlagUntilTimeout(I3C_HandleTypeDef *hi3c, uint32_t flag, FlagStatus flagstatus, + uint32_t timeout, uint32_t tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I3C_GET_FLAG(hi3c, flag) == flagstatus) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + if (__HAL_I3C_GET_FLAG(hi3c, flag) == flagstatus) + { + hi3c->ErrorCode = HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + } + } + } + + /* Check if an error occurs during Flag waiting */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief This function handles I3C Dynamic Address Assignment timeout. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param timeout : [IN] Timeout duration in millisecond. + * @param tickstart : [IN] Tick start value + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_WaitOnDAAUntilTimeout(I3C_HandleTypeDef *hi3c, uint32_t timeout, uint32_t tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t active_flags = READ_REG(hi3c->Instance->EVR); + + while (((active_flags & (HAL_I3C_FLAG_FCF | HAL_I3C_FLAG_TXFNFF)) == 0U) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + if ((active_flags & (HAL_I3C_FLAG_FCF | HAL_I3C_FLAG_TXFNFF)) == 0U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + } + } + } + + /* Check if an error occurs during Flag waiting */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_ERRF) == SET) + { + /* Clear error flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + + /* Update handle error code parameter */ + I3C_GetErrorSources(hi3c); + + status = HAL_ERROR; + } + + /* Read active flags from EVR register */ + active_flags = READ_REG(hi3c->Instance->EVR); + } + return status; +} + +/** + * @brief I3C transmit by byte. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_TransmitByteTreatment(I3C_HandleTypeDef *hi3c) +{ + /* Check TX FIFO not full flag */ + while ((__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_TXFNFF) == SET) && (hi3c->TxXferCount > 0U)) + { + /* Write Tx buffer data to transmit register */ + LL_I3C_TransmitData8(hi3c->Instance, *hi3c->pXferData->TxBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->TxBuf.pBuffer++; + + /* Decrement remaining bytes counter */ + hi3c->TxXferCount--; + } +} + +/** + * @brief I3C transmit by word. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_TransmitWordTreatment(I3C_HandleTypeDef *hi3c) +{ + /* Check TX FIFO not full flag */ + while (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_TXFNFF) == SET) + { + /* Write Tx buffer data to transmit register */ + LL_I3C_TransmitData32(hi3c->Instance, *((uint32_t *)hi3c->pXferData->TxBuf.pBuffer)); + + /* Increment Buffer pointer */ + hi3c->pXferData->TxBuf.pBuffer += sizeof(uint32_t); + + if (hi3c->TxXferCount < sizeof(uint32_t)) + { + hi3c->TxXferCount = 0U; + } + else + { + /* Decrement remaining bytes counter */ + hi3c->TxXferCount -= sizeof(uint32_t); + } + } +} + +/** + * @brief I3C receive by byte. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_ReceiveByteTreatment(I3C_HandleTypeDef *hi3c) +{ + /* Check RX FIFO not empty flag */ + while (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_RXFNEF) == SET) + { + /* Store received bytes in the Rx buffer */ + *hi3c->pXferData->RxBuf.pBuffer = LL_I3C_ReceiveData8(hi3c->Instance); + + /* Increment Buffer pointer */ + hi3c->pXferData->RxBuf.pBuffer++; + + /* Decrement remaining bytes counter */ + hi3c->RxXferCount--; + } +} + +/** + * @brief I3C receive by word. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_ReceiveWordTreatment(I3C_HandleTypeDef *hi3c) +{ + /* Check RX FIFO not empty flag */ + while (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_RXFNEF) == SET) + { + /* Store received bytes in the Rx buffer */ + *((uint32_t *)hi3c->pXferData->RxBuf.pBuffer) = LL_I3C_ReceiveData32(hi3c->Instance); + + /* Increment Buffer pointer */ + hi3c->pXferData->RxBuf.pBuffer += sizeof(uint32_t); + + if (hi3c->RxXferCount > sizeof(uint32_t)) + { + /* Decrement remaining bytes counter */ + hi3c->RxXferCount -= sizeof(uint32_t); + } + else + { + /* Reset counter as last modulo word Rx data received */ + hi3c->RxXferCount = 0U; + } + } +} + +/** + * @brief I3C Control data treatment. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_ControlDataTreatment(I3C_HandleTypeDef *hi3c) +{ + /* Check if Control FIFO requests data */ + if (__HAL_I3C_GET_FLAG(hi3c, HAL_I3C_FLAG_CFNFF) == SET) + { + /* Decrement remaining control buffer data counter */ + hi3c->ControlXferCount--; + + /* Write Control buffer data to control register */ + WRITE_REG(hi3c->Instance->CR, *hi3c->pXferData->CtrlBuf.pBuffer); + + /* Increment Buffer pointer */ + hi3c->pXferData->CtrlBuf.pBuffer++; + } +} + +/** + * @brief I3C state update. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_StateUpdate(I3C_HandleTypeDef *hi3c) +{ + /* Check on previous state */ + if (hi3c->PreviousState == HAL_I3C_STATE_LISTEN) + { + /* Set state to listen */ + hi3c->State = HAL_I3C_STATE_LISTEN; + + /* Check the I3C mode */ + if (hi3c->Mode == HAL_I3C_MODE_TARGET) + { + /* Store the target event treatment function */ + hi3c->XferISR = I3C_Tgt_Event_ISR; + } + else + { + /* Store the controller event treatment function */ + hi3c->XferISR = I3C_Ctrl_Event_ISR; + } + } + else + { + /* Set state to ready */ + hi3c->State = HAL_I3C_STATE_READY; + + /* Reset XferISR */ + hi3c->XferISR = NULL; + } +} + +/** + * @brief I3C get error source. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_GetErrorSources(I3C_HandleTypeDef *hi3c) +{ + /* Check on the I3C mode */ + switch (hi3c->Mode) + { + case HAL_I3C_MODE_CONTROLLER: + { + /* I3C data error during controller-role hand-off procedure */ + if (LL_I3C_IsActiveFlag_DERR(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_DATA_HAND_OFF; + } + + /* I3C data not acknowledged error */ + if (LL_I3C_IsActiveFlag_DNACK(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_DATA_NACK; + } + + /* I3C address not acknowledged error */ + if (LL_I3C_IsActiveFlag_ANACK(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_ADDRESS_NACK; + } + + /* I3C Status FIFO Over-Run or Control FIFO Under-Run error */ + if (LL_I3C_IsActiveFlag_COVR(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_COVR; + } + + break; + } + + case HAL_I3C_MODE_TARGET: + { + /* I3C SCL stall error */ + if (LL_I3C_IsActiveFlag_STALL(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_STALL; + } + + break; + } + + default: + { + break; + } + } + + /* I3C Rx FIFO Over-Run or Tx FIFO Under-Run error */ + if (LL_I3C_IsActiveFlag_DOVR(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= HAL_I3C_ERROR_DOVR; + } + + /* I3C Protocol error */ + if (LL_I3C_IsActiveFlag_PERR(hi3c->Instance) == 1U) + { + hi3c->ErrorCode |= (I3C_SER_PERR | LL_I3C_GetMessageErrorCode(hi3c->Instance)); + } +} + +/** + * @brief I3C transfer prior preparation. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param counter : [IN] Number of devices or commands to treat. + * @param option : [IN] Parameter indicates the transfer option. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Xfer_PriorPreparation(I3C_HandleTypeDef *hi3c, uint8_t counter, uint32_t option) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t current_tx_index = 0U; + uint32_t global_tx_size = 0U; + uint32_t global_rx_size = 0U; + uint32_t nb_tx_frame = 0U; + uint32_t direction; + + for (uint32_t descr_index = 0U; descr_index < counter; descr_index++) + { + /* Direct CCC command */ + if ((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_DIRECT) + { + /* Update direction of frame */ + direction = hi3c->pCCCDesc[descr_index].Direction; + + /* Direction read with Define byte */ + if (((option & I3C_DEFINE_BYTE_MASK) != 0U) && (direction == HAL_I3C_DIRECTION_READ)) + { + nb_tx_frame += 1U; + + global_tx_size += 1U; + + global_rx_size += hi3c->pCCCDesc[descr_index].CCCBuf.Size - 1U; + + /* Check on the global size and on the Tx buffer pointer */ + if ((global_tx_size > hi3c->pXferData->TxBuf.Size) || \ + (current_tx_index > hi3c->pXferData->TxBuf.Size) || \ + (hi3c->pXferData->TxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + + status = HAL_ERROR; + } + else + { + /* Fill global Tx buffer with data and update the current index of the Tx buffer */ + current_tx_index = I3C_FillTxBuffer_CCC(hi3c, descr_index, 1U, current_tx_index); + } + } + else if (direction == HAL_I3C_DIRECTION_WRITE) + { + nb_tx_frame += 1U; + + global_tx_size += hi3c->pCCCDesc[descr_index].CCCBuf.Size; + + /* Check on the global size and on the Tx buffer pointer */ + if ((global_tx_size > hi3c->pXferData->TxBuf.Size) || \ + (current_tx_index > hi3c->pXferData->TxBuf.Size) || \ + (hi3c->pXferData->TxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + + status = HAL_ERROR; + } + else + { + /* Fill global Tx buffer with data and update the current index of the Tx buffer */ + current_tx_index = I3C_FillTxBuffer_CCC(hi3c, + descr_index, + hi3c->pCCCDesc[descr_index].CCCBuf.Size, + current_tx_index); + } + } + /* Direction read without Define byte */ + else + { + global_rx_size += hi3c->pCCCDesc[descr_index].CCCBuf.Size; + } + } + /* Broadcast CCC command */ + else if ((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_CCC) + { + /* Update direction of frame */ + direction = hi3c->pCCCDesc[descr_index].Direction; + + if (direction == HAL_I3C_DIRECTION_WRITE) + { + nb_tx_frame += 1U; + + global_tx_size += hi3c->pCCCDesc[descr_index].CCCBuf.Size; + + /* Check on the global size and on the Tx buffer pointer */ + if ((global_tx_size > hi3c->pXferData->TxBuf.Size) || \ + (current_tx_index > hi3c->pXferData->TxBuf.Size) || \ + (hi3c->pXferData->TxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + + status = HAL_ERROR; + } + else + { + /* Fill global Tx buffer with data and update the current index of the Tx buffer */ + current_tx_index = I3C_FillTxBuffer_CCC(hi3c, + descr_index, + hi3c->pCCCDesc[descr_index].CCCBuf.Size, + current_tx_index); + } + } + else + { + status = HAL_ERROR; + } + } + /* Private */ + else + { + /* Update direction of frame */ + direction = hi3c->pPrivateDesc[descr_index].Direction; + + if (direction == HAL_I3C_DIRECTION_WRITE) + { + nb_tx_frame += 1U; + + global_tx_size += hi3c->pPrivateDesc[descr_index].TxBuf.Size; + + /* Check on the global size and on the Tx buffer pointer */ + if ((global_tx_size > hi3c->pXferData->TxBuf.Size) || \ + (current_tx_index > hi3c->pXferData->TxBuf.Size) || \ + (hi3c->pXferData->TxBuf.pBuffer == NULL)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + + status = HAL_ERROR; + } + else + { + /* Fill global Tx buffer with data and update the current index of the Tx buffer */ + current_tx_index = I3C_FillTxBuffer_Private(hi3c, + descr_index, + hi3c->pPrivateDesc[descr_index].TxBuf.Size, + current_tx_index); + } + } + else + { + global_rx_size += hi3c->pPrivateDesc[descr_index].RxBuf.Size; + } + } + + /* Check if there is an error in the Tx Buffer*/ + if (status == HAL_ERROR) + { + break; + } + } + + if (status == HAL_OK) + { + /* Check on the Tx threshold and the number of Tx frame */ + if (LL_I3C_GetTxFIFOThreshold(hi3c->Instance) == LL_I3C_TXFIFO_THRESHOLD_4_4) + { + /* LL_I3C_TXFIFO_THRESHOLD_4_4 is not allowed when the transfer descriptor contains + multiple transmission frames */ + if (nb_tx_frame > 1U) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + /* Check on the size Rx buffer */ + if (global_rx_size > hi3c->pXferData->RxBuf.Size) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + hi3c->RxXferCount = global_rx_size; + } + + /* Set handle transfer parameters */ + hi3c->TxXferCount = global_tx_size; + } + + return status; +} + +/** + * @brief I3C fill Tx Buffer with data from CCC Descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param indexDesc : [IN] Index of descriptor. + * @param txSize : [IN] Size of Tx data. + * @param txCurrentIndex : [IN] Current Index of TxBuffer. + * @retval index_tx : [OUT] New current Index of TxBuffer. + */ +static uint32_t I3C_FillTxBuffer_CCC(I3C_HandleTypeDef *hi3c, + uint32_t indexDesc, + uint32_t txSize, + uint32_t txCurrentIndex) +{ + uint32_t index_tx = txCurrentIndex; + + for (uint32_t index = 0U; index < txSize; index++) + { + hi3c->pXferData->TxBuf.pBuffer[index_tx] = hi3c->pCCCDesc[indexDesc].CCCBuf.pBuffer[index]; + + index_tx++; + } + + return index_tx; +} + +/** + * @brief I3C fill Tx Buffer with data from Private Descriptor. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param indexDesc : [IN] Index of descriptor. + * @param txSize : [IN] Size of Tx data. + * @param txCurrentIndex : [IN] Current Index of TxBuffer. + * @retval index_tx : [OUT] New current Index of TxBuffer. + */ +static uint32_t I3C_FillTxBuffer_Private(I3C_HandleTypeDef *hi3c, + uint32_t indexDesc, + uint32_t txSize, + uint32_t txCurrentIndex) +{ + uint32_t index_tx = txCurrentIndex; + + for (uint32_t index = 0U; index < txSize; index++) + { + hi3c->pXferData->TxBuf.pBuffer[index_tx] = hi3c->pPrivateDesc[indexDesc].TxBuf.pBuffer[index]; + + index_tx++; + } + + return index_tx; +} + +/** + * @brief I3C Control buffer prior preparation. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param counter : [IN] Number of devices or commands to treat. + * @param option : [IN] Parameter indicates the transfer option. + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_ControlBuffer_PriorPreparation(I3C_HandleTypeDef *hi3c, + uint8_t counter, + uint32_t option) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t nb_define_bytes; + uint32_t stop_condition; + uint32_t nb_data_bytes; + uint32_t index; + + /* Check on the control buffer pointer */ + if (hi3c->pXferData->CtrlBuf.pBuffer == NULL) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Extract from option required information */ + nb_define_bytes = (option & I3C_DEFINE_BYTE_MASK); + stop_condition = (option & I3C_RESTART_STOP_MASK); + + /* Check on the deactivation of the arbitration */ + if ((option & I3C_ARBITRATION_HEADER_MASK) == I3C_ARBITRATION_HEADER_MASK) + { + /* Disable arbitration header */ + LL_I3C_DisableArbitrationHeader(hi3c->Instance); + } + else + { + /* Enable arbitration header */ + LL_I3C_EnableArbitrationHeader(hi3c->Instance); + } + + /* Check on the operation type */ + if ((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_CCC) + { + /*------------------------------------------ Broadcast CCC -----------------------------------------------------*/ + /* Check on the control buffer size */ + if (hi3c->pXferData->CtrlBuf.Size < (uint32_t)counter) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Set remaining control buffer data counter */ + hi3c->ControlXferCount = (uint32_t)counter; + + /* For loop on the number of commands */ + for (index = 0U; index < ((uint32_t)counter - 1U); index++) + { + /* Update control buffer value */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = ((uint32_t)hi3c->pCCCDesc[index].CCCBuf.Size | + ((uint32_t)hi3c->pCCCDesc[index].CCC << I3C_CR_CCC_Pos) | + LL_I3C_CONTROLLER_MTYPE_CCC | stop_condition); + } + + /* At the last device we should generate a stop condition */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = ((uint32_t)hi3c->pCCCDesc[index].CCCBuf.Size | + ((uint32_t)hi3c->pCCCDesc[index].CCC << I3C_CR_CCC_Pos) | + LL_I3C_CONTROLLER_MTYPE_CCC | LL_I3C_GENERATE_STOP); + } + } + else if ((option & I3C_OPERATION_TYPE_MASK) == LL_I3C_CONTROLLER_MTYPE_DIRECT) + { + /*------------------------------------------ Direct CCC --------------------------------------------------------*/ + /* Check on the control buffer size */ + if (hi3c->pXferData->CtrlBuf.Size < ((uint32_t)counter * 2U)) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Set remaining control buffer data counter */ + hi3c->ControlXferCount = ((uint32_t)counter * 2U); + + /* For loop on the number of (devices or commands) * 2 */ + for (index = 0U; index < (((uint32_t)counter * 2U) - 2U); index += 2U) + { + /* Step 1 : update control buffer value for the CCC command */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = (nb_define_bytes | + ((uint32_t)hi3c->pCCCDesc[index / 2U].CCC << I3C_CR_CCC_Pos) | + LL_I3C_CONTROLLER_MTYPE_CCC | LL_I3C_GENERATE_RESTART); + + /* Step 2 : update control buffer value for target address */ + hi3c->pXferData->CtrlBuf.pBuffer[index + 1U] = + (((uint32_t)hi3c->pCCCDesc[index / 2U].CCCBuf.Size - nb_define_bytes) | + hi3c->pCCCDesc[index / 2U].Direction | + ((uint32_t)hi3c->pCCCDesc[index / 2U].TargetAddr << I3C_CR_ADD_Pos) | + LL_I3C_CONTROLLER_MTYPE_DIRECT | stop_condition); + } + + /* Update control buffer value for the last CCC command */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = (nb_define_bytes | + ((uint32_t)hi3c->pCCCDesc[index / 2U].CCC << I3C_CR_CCC_Pos) | + LL_I3C_CONTROLLER_MTYPE_CCC | LL_I3C_GENERATE_RESTART); + + /* At the last device we should generate a stop condition */ + hi3c->pXferData->CtrlBuf.pBuffer[index + 1U] = + (((uint32_t)hi3c->pCCCDesc[index / 2U].CCCBuf.Size - nb_define_bytes) | + hi3c->pCCCDesc[index / 2U].Direction | + ((uint32_t)hi3c->pCCCDesc[index / 2U].TargetAddr << I3C_CR_ADD_Pos) | + LL_I3C_CONTROLLER_MTYPE_DIRECT | LL_I3C_GENERATE_STOP); + } + } + else + { + /*------------------------------------------ Private I3C/I2C ---------------------------------------------------*/ + /* Check on the control buffer size */ + if (hi3c->pXferData->CtrlBuf.Size < (uint32_t)counter) + { + hi3c->ErrorCode = HAL_I3C_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + /* Set remaining control buffer data counter */ + hi3c->ControlXferCount = (uint32_t)counter; + + /* For loop on the number of devices */ + for (index = 0U; index < ((uint32_t)counter - 1U); index++) + { + /* Check on transfer direction */ + if (hi3c->pPrivateDesc[index].Direction == HAL_I3C_DIRECTION_READ) + { + nb_data_bytes = hi3c->pPrivateDesc[index].RxBuf.Size; + } + else + { + nb_data_bytes = hi3c->pPrivateDesc[index].TxBuf.Size; + } + + /* Update control buffer value */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = + (nb_data_bytes | hi3c->pPrivateDesc[index].Direction | + ((uint32_t)hi3c->pPrivateDesc[index].TargetAddr << I3C_CR_ADD_Pos) | + (option & I3C_OPERATION_TYPE_MASK) | stop_condition); + } + + /* Check on transfer direction */ + if (hi3c->pPrivateDesc[index].Direction == HAL_I3C_DIRECTION_READ) + { + nb_data_bytes = hi3c->pPrivateDesc[index].RxBuf.Size; + } + else + { + nb_data_bytes = hi3c->pPrivateDesc[index].TxBuf.Size; + } + + /* At the last device we should generate a stop condition */ + hi3c->pXferData->CtrlBuf.pBuffer[index] = + (nb_data_bytes | hi3c->pPrivateDesc[index].Direction | + ((uint32_t)hi3c->pPrivateDesc[index].TargetAddr << I3C_CR_ADD_Pos) | + (option & I3C_OPERATION_TYPE_MASK) | LL_I3C_GENERATE_STOP); + } + } + } + + return status; +} + +/** + * @brief Check if target device is ready for communication. + * @param hi3c : Pointer to a I3C_HandleTypeDef structure that contains + * the configuration information for the specified I3C. + * @param pDevice : [IN] Structure to define the device address and the device type. + * @param trials : [IN] Number of trials + * @param timeout : [IN] Timeout duration + * @retval HAL Status : Value from HAL_StatusTypeDef enumeration. + */ +static HAL_StatusTypeDef I3C_Ctrl_IsDevice_Ready(I3C_HandleTypeDef *hi3c, + const I3C_DeviceTypeDef *pDevice, + uint32_t trials, + uint32_t timeout) +{ + __IO uint32_t I3C_Trials = 0UL; + __IO uint32_t exit_condition; + uint32_t CR_tmp; + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + HAL_I3C_StateTypeDef handle_state; + uint32_t arbitration_previous_state; + + /* Get I3C handle state */ + handle_state = hi3c->State; + + /* check on the Mode */ + if (hi3c->Mode != HAL_I3C_MODE_CONTROLLER) + { + hi3c->ErrorCode = HAL_I3C_ERROR_NOT_ALLOWED; + status = HAL_ERROR; + } + /* check on the State */ + else if ((handle_state != HAL_I3C_STATE_READY) && (handle_state != HAL_I3C_STATE_LISTEN)) + { + status = HAL_BUSY; + } + else + { + /* Set handle transfer parameters */ + hi3c->ErrorCode = HAL_I3C_ERROR_NONE; + hi3c->State = HAL_I3C_STATE_BUSY; + + /* Before modify the arbitration, get the current arbitration state */ + arbitration_previous_state = LL_I3C_IsEnabledArbitrationHeader(hi3c->Instance); + + /* Disable arbitration header */ + LL_I3C_DisableArbitrationHeader(hi3c->Instance); + + CR_tmp = (HAL_I3C_DIRECTION_WRITE | + ((uint32_t)pDevice->Address << I3C_CR_ADD_Pos) | + pDevice->MessageType | LL_I3C_GENERATE_STOP); + + do + { + /* Initiate a start condition by writing in the CR register */ + WRITE_REG(hi3c->Instance->CR, CR_tmp); + + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + + tickstart = HAL_GetTick(); + + while (exit_condition == 0U) + { + if (timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > timeout) || (timeout == 0U)) + { + /* Update I3C error code */ + hi3c->ErrorCode |= HAL_I3C_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + + break; + } + } + /* Calculate exit_condition value based on Frame complete and error flags */ + exit_condition = (READ_REG(hi3c->Instance->EVR) & (I3C_EVR_FCF | I3C_EVR_ERRF)); + } + + if (status == HAL_OK) + { + /* Check if the FCF flag has been set */ + if (__HAL_I3C_GET_FLAG(hi3c, I3C_EVR_FCF) == SET) + { + /* Clear frame complete flag */ + LL_I3C_ClearFlag_FC(hi3c->Instance); + + /* Device is ready */ + break; + } + else + { + /* Clear ERR flag */ + LL_I3C_ClearFlag_ERR(hi3c->Instance); + } + } + + /* Increment Trials */ + I3C_Trials++; + + } while ((I3C_Trials < trials) && (status == HAL_OK)); + + /* Device is not ready */ + if (trials == I3C_Trials) + { + hi3c->ErrorCode = HAL_I3C_ERROR_ADDRESS_NACK; + status = HAL_ERROR; + } + + /* update state to Previous state */ + I3C_StateUpdate(hi3c); + + /* Check if previous arbitration state is enabled */ + if (arbitration_previous_state == 1U) + { + LL_I3C_EnableArbitrationHeader(hi3c->Instance); + } + } + + return status; +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param InterruptRequest : [IN] Value of the interrupt request + * @retval None + */ +static void I3C_Enable_IRQ(I3C_HandleTypeDef *hi3c, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + /* Check if requested interrupts are related to listening mode */ + if ((InterruptRequest & I3C_XFER_LISTEN_IT) != 0U) + { + tmpisr |= ((InterruptRequest & (~I3C_XFER_LISTEN_IT)) | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target transmit in IT mode */ + if ((InterruptRequest & I3C_XFER_TARGET_TX_IT) != 0U) + { + /* Enable frame complete, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target receive in IT mode */ + if ((InterruptRequest & I3C_XFER_TARGET_RX_IT) != 0U) + { + /* Enable frame complete, receive FIFO not empty and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_RXFNEIE | HAL_I3C_IT_ERRIE) ; + } + + /* Check if requested interrupts are related to transmit/receive in DMA mode */ + if ((InterruptRequest & I3C_XFER_DMA) != 0U) + { + /* Enable frame complete and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target hot join */ + if ((InterruptRequest & I3C_XFER_TARGET_HOTJOIN) != 0U) + { + /* Enable dynamic address update and error interrupts */ + tmpisr |= (HAL_I3C_IT_DAUPDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target control role */ + if ((InterruptRequest & I3C_XFER_TARGET_CTRLROLE) != 0U) + { + /* Enable control role update and error interrupts */ + tmpisr |= (HAL_I3C_IT_CRUPDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target in band interrupt */ + if ((InterruptRequest & I3C_XFER_TARGET_IBI) != 0U) + { + /* Enable IBI end and error interrupts */ + tmpisr |= (HAL_I3C_IT_IBIENDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_TX_IT) != 0U) + { + /* Enable frame complete, control FIFO not full, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller receive in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_RX_IT) != 0U) + { + /* Enable frame complete, control FIFO not full, receive FIFO not empty and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_RXFNEIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit read or a broadcast CCC in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_RX_CCC_IT) != 0U) + { + /* Enable frame complete, transmit FIFO not full, control FIFO not full, + receive FIFO not empty and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_RXFNEIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit broadcast ENTDAA CCC in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_DAA_IT) != 0U) + { + /* Enable frame complete, control FIFO not full, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Enable requested interrupts */ + __HAL_I3C_ENABLE_IT(hi3c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @param InterruptRequest : [IN] Value of the interrupt request + * @retval None + */ +static void I3C_Disable_IRQ(I3C_HandleTypeDef *hi3c, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + /* Check if requested interrupts are related to listening mode */ + if ((InterruptRequest & I3C_XFER_LISTEN_IT) != 0U) + { + tmpisr |= ((InterruptRequest & (~I3C_XFER_LISTEN_IT)) | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target transmit mode */ + if ((InterruptRequest & I3C_XFER_TARGET_TX_IT) != 0U) + { + /* Disable frame complete, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target receive mode */ + if ((InterruptRequest & I3C_XFER_TARGET_RX_IT) != 0U) + { + /* Disable frame complete, receive FIFO not empty and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_RXFNEIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to transmit/receive in DMA mode */ + if ((InterruptRequest & I3C_XFER_DMA) != 0U) + { + /* Disable frame complete and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target hot join */ + if ((InterruptRequest & I3C_XFER_TARGET_HOTJOIN) != 0U) + { + /* Disable dynamic address update and error interrupts */ + tmpisr |= (HAL_I3C_IT_DAUPDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target control role */ + if ((InterruptRequest & I3C_XFER_TARGET_CTRLROLE) != 0U) + { + /* Disable control role update and error interrupts */ + tmpisr |= (HAL_I3C_IT_CRUPDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to target in band interrupt */ + if ((InterruptRequest & I3C_XFER_TARGET_IBI) != 0U) + { + /* Disable IBI end and error interrupts */ + tmpisr |= (HAL_I3C_IT_IBIENDIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_TX_IT) != 0U) + { + /* Disable frame complete, control FIFO not full, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit read or a broadcast CCC in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_RX_CCC_IT) != 0U) + { + /* Disable frame complete, transmit FIFO not full, control FIFO not full, + receive FIFO not empty and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_RXFNEIE | HAL_I3C_IT_ERRIE); + } + + /* Check if requested interrupts are related to controller transmit broadcast ENTDAA CCC in IT mode */ + if ((InterruptRequest & I3C_XFER_CONTROLLER_DAA_IT) != 0U) + { + /* Disable frame complete, control FIFO not full, transmit FIFO not full and error interrupts */ + tmpisr |= (HAL_I3C_IT_FCIE | HAL_I3C_IT_CFNFIE | HAL_I3C_IT_TXFNFIE | HAL_I3C_IT_ERRIE); + } + + /* Disable requested interrupts */ + __HAL_I3C_DISABLE_IT(hi3c, tmpisr); +} + +/** + * @brief I3C error treatment. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_ErrorTreatment(I3C_HandleTypeDef *hi3c) +{ + HAL_I3C_StateTypeDef tmpstate = hi3c->State; + uint32_t dmaabortongoing = 0U; + + /* Check on the state */ + if (tmpstate == HAL_I3C_STATE_BUSY) + { + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + /* Disable all interrupts related to busy state */ + I3C_Disable_IRQ(hi3c, (I3C_XFER_TARGET_IBI | I3C_XFER_TARGET_HOTJOIN | I3C_XFER_TARGET_CTRLROLE)); + } + else + { + /* Disable all interrupts related to busy Tx and Rx state */ + I3C_Disable_IRQ(hi3c, I3C_XFER_CONTROLLER_RX_CCC_IT); + + /* Reset Tx counter */ + hi3c->TxXferCount = 0U; + + /* Reset Rx counter */ + hi3c->RxXferCount = 0U; + + /* Reset Control counter */ + hi3c->ControlXferCount = 0U; + + /* Reset Tx function pointer */ + hi3c->ptrTxFunc = NULL; + + /* Reset Rx function pointer */ + hi3c->ptrRxFunc = NULL; + + /* Reset Context pointer */ + hi3c->pXferData = NULL; + hi3c->pCCCDesc = NULL; + hi3c->pPrivateDesc = NULL; + + /* Flush all FIFOs */ + /* Flush the content of Tx Fifo */ + LL_I3C_RequestTxFIFOFlush(hi3c->Instance); + + /* Flush the content of Rx Fifo */ + LL_I3C_RequestRxFIFOFlush(hi3c->Instance); + + /* Check on the I3C mode: Control and status FIFOs available only with controller mode */ + if (hi3c->Mode == HAL_I3C_MODE_CONTROLLER) + { + /* Flush the content of Control Fifo */ + LL_I3C_RequestControlFIFOFlush(hi3c->Instance); + + /* Flush the content of Status Fifo */ + LL_I3C_RequestStatusFIFOFlush(hi3c->Instance); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort control DMA transfer if any */ + if (hi3c->hdmacr != NULL) + { + /* Disable control DMA Request */ + LL_I3C_DisableDMAReq_Control(hi3c->Instance); + + /* Check DMA state */ + if (HAL_DMA_GetState(hi3c->hdmacr) != HAL_DMA_STATE_READY) + { + /* Set the I3C DMA Abort callback : will lead to call HAL_I3C_AbortCpltCallback() + at end of DMA abort procedure */ + + /* DMA abort on going */ + dmaabortongoing = 1U; + + /* Abort control DMA */ + if (HAL_DMA_Abort_IT(hi3c->hdmacr) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi3c->hdmacr->XferAbortCallback(hi3c->hdmacr); + } + } + } + + /* Abort RX DMA transfer if any */ + if (hi3c->hdmarx != NULL) + { + /* Disable Rx DMA Request */ + LL_I3C_DisableDMAReq_RX(hi3c->Instance); + + /* Check DMA state */ + if (HAL_DMA_GetState(hi3c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I3C DMA Abort callback : will lead to call HAL_I3C_AbortCpltCallback() + at end of DMA abort procedure */ + hi3c->hdmarx->XferAbortCallback = I3C_DMAAbort; + + /* DMA abort on going */ + dmaabortongoing = 1U; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi3c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi3c->hdmarx->XferAbortCallback(hi3c->hdmarx); + } + } + } + + /* Abort TX DMA transfer if any */ + if (hi3c->hdmatx != NULL) + { + /* Disable Tx DMA Request */ + LL_I3C_DisableDMAReq_TX(hi3c->Instance); + + /* Check DMA state */ + if (HAL_DMA_GetState(hi3c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I3C DMA Abort callback : will lead to call HAL_I3C_AbortCpltCallback() + at end of DMA abort procedure */ + hi3c->hdmatx->XferAbortCallback = I3C_DMAAbort; + + /* DMA abort on going */ + dmaabortongoing = 1U; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi3c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi3c->hdmatx->XferAbortCallback(hi3c->hdmatx); + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + /* Call Error callback if there is no DMA abort on going */ + if (dmaabortongoing == 0U) + { + I3C_TreatErrorCallback(hi3c); + } +} + +/** + * @brief I3C Error callback treatment. + * @param hi3c : [IN] Pointer to an I3C_HandleTypeDef structure that contains the configuration + * information for the specified I3C. + * @retval None + */ +static void I3C_TreatErrorCallback(I3C_HandleTypeDef *hi3c) +{ + if (hi3c->State == HAL_I3C_STATE_ABORT) + { + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1) + hi3c->AbortCpltCallback(hi3c); +#else + HAL_I3C_AbortCpltCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + } + else + { + /* Update handle state parameter */ + I3C_StateUpdate(hi3c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I3C_REGISTER_CALLBACKS == 1) + hi3c->ErrorCallback(hi3c); +#else + HAL_I3C_ErrorCallback(hi3c); +#endif /* USE_HAL_I3C_REGISTER_CALLBACKS */ + } +} + +/** + * @} + */ + +#endif /* HAL_I3C_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_icache.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_icache.c new file mode 100644 index 000000000..984e94337 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_icache.c @@ -0,0 +1,512 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_icache.c + * @author MCD Application Team + * @brief ICACHE HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Instruction Cache (ICACHE). + * + Initialization and Configuration + * + Invalidate functions + * + Monitoring management + * + Memory address remap management + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### ICACHE main features ##### + ============================================================================== + [..] + The Texture Cache (ICACHE) is introduced on AXI read-only texture port of + the GPU2D to improve performance when reading texture data from internal and + external memories. + + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The ICACHE HAL driver can be used as follows: + + (#) Optionally configure the Instruction Cache mode with + HAL_ICACHE_ConfigAssociativityMode() if the default configuration + does not suit the application requirements. + + (#) Enable and disable the Instruction Cache with respectively + HAL_ICACHE_Enable() and HAL_ICACHE_Disable(). + Use HAL_ICACHE_IsEnabled() to get the Instruction Cache status. + To ensure a deterministic cache behavior after power on, system reset or after + a call to @ref HAL_ICACHE_Disable(), the application must call + @ref HAL_ICACHE_WaitForInvalidateComplete(). Indeed on power on, system reset + or cache disable, an automatic cache invalidation procedure is launched and the + cache is bypassed until the operation completes. + + (#) Initiate the cache maintenance invalidation procedure with either + HAL_ICACHE_Invalidate() (blocking mode) or HAL_ICACHE_Invalidate_IT() + (interrupt mode). When interrupt mode is used, the callback function + HAL_ICACHE_InvalidateCompleteCallback() is called when the invalidate + procedure is complete. The function HAL_ICACHE_WaitForInvalidateComplete() + may be called to wait for the end of the invalidate procedure automatically + initiated when disabling the Instruction Cache with HAL_ICACHE_Disable(). + The cache operation is bypassed during the invalidation procedure. + + (#) Use the performance monitoring counters for Hit and Miss with the following + functions: HAL_ICACHE_Monitor_Start(), HAL_ICACHE_Monitor_Stop(), + HAL_ICACHE_Monitor_Reset(), HAL_ICACHE_Monitor_GetHitValue() and + HAL_ICACHE_Monitor_GetMissValue() + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup ICACHE ICACHE + * @brief HAL ICACHE module driver + * @{ + */ +#if defined(ICACHE) && defined (HAL_ICACHE_MODULE_ENABLED) + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ICACHE_Private_Constants ICACHE Private Constants + * @{ + */ +#define ICACHE_INVALIDATE_TIMEOUT_VALUE 1U /* 1ms */ +#define ICACHE_DISABLE_TIMEOUT_VALUE 1U /* 1ms */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ICACHE_Private_Macros ICACHE Private Macros + * @{ + */ + +#define IS_ICACHE_ASSOCIATIVITY_MODE(__MODE__) (((__MODE__) == ICACHE_1WAY) || \ + ((__MODE__) == ICACHE_4WAYS)) + +#define IS_ICACHE_MONITOR_TYPE(__TYPE__) (((__TYPE__) == ICACHE_MONITOR_HIT_MISS) || \ + ((__TYPE__) == ICACHE_MONITOR_HIT) || \ + ((__TYPE__) == ICACHE_MONITOR_MISS)) + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ICACHE_Exported_Functions ICACHE Exported Functions + * @{ + */ + +/** @defgroup ICACHE_Exported_Functions_Group1 Initialization and control functions + * @brief Initialization and control functions + * + @verbatim + ============================================================================== + ##### Initialization and control functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize and control the + Instruction Cache (mode, invalidate procedure, performance counters). + @endverbatim + * @{ + */ + +/** + * @brief Configure the Instruction Cache cache associativity mode selection. + * @param AssociativityMode Associativity mode selection + * This parameter can be one of the following values: + * @arg ICACHE_1WAY 1-way cache (direct mapped cache) + * @arg ICACHE_4WAYS 4-ways set associative cache (default) + * @retval HAL status (HAL_OK/HAL_ERROR) + */ +HAL_StatusTypeDef HAL_ICACHE_ConfigAssociativityMode(uint32_t AssociativityMode) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ICACHE_ASSOCIATIVITY_MODE(AssociativityMode)); + + /* Check cache is not enabled */ + if (READ_BIT(ICACHE->CR, ICACHE_CR_EN) != 0U) + { + status = HAL_ERROR; + } + else + { + MODIFY_REG(ICACHE->CR, ICACHE_CR_WAYSEL, AssociativityMode); + } + + return status; +} + +/** + * @brief DeInitialize the Instruction Cache. + * @retval HAL status (HAL_OK) + */ +HAL_StatusTypeDef HAL_ICACHE_DeInit(void) +{ + /* Reset interrupt enable value */ + WRITE_REG(ICACHE->IER, 0U); + + /* Clear any pending flags */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF | ICACHE_FCR_CERRF); + + /* Disable cache then set default associative mode value */ + CLEAR_BIT(ICACHE->CR, ICACHE_CR_EN); + WRITE_REG(ICACHE->CR, ICACHE_CR_WAYSEL); + + /* Stop monitor and reset monitor values */ + CLEAR_BIT(ICACHE->CR, ICACHE_MONITOR_HIT_MISS); + SET_BIT(ICACHE->CR, (ICACHE_MONITOR_HIT_MISS << 2U)); + CLEAR_BIT(ICACHE->CR, (ICACHE_MONITOR_HIT_MISS << 2U)); + + + return HAL_OK; +} + +/** + * @brief Enable the Instruction Cache. + * @note This function always returns HAL_OK even if there is any ongoing + * cache operation. The Instruction Cache is bypassed until the + * cache operation completes. + * @retval HAL status (HAL_OK) + */ +HAL_StatusTypeDef HAL_ICACHE_Enable(void) +{ + SET_BIT(ICACHE->CR, ICACHE_CR_EN); + + return HAL_OK; +} + +/** + * @brief Disable the Instruction Cache. + * @note This function waits for the cache being disabled but + * not for the end of the automatic cache invalidation procedure. + * @retval HAL status (HAL_OK/HAL_TIMEOUT) + */ +HAL_StatusTypeDef HAL_ICACHE_Disable(void) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Make sure BSYENDF is reset before to disable the instruction cache */ + /* as it automatically starts a cache invalidation procedure */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF); + + CLEAR_BIT(ICACHE->CR, ICACHE_CR_EN); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for instruction cache being disabled */ + while (READ_BIT(ICACHE->CR, ICACHE_CR_EN) != 0U) + { + if ((HAL_GetTick() - tickstart) > ICACHE_DISABLE_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(ICACHE->CR, ICACHE_CR_EN) != 0U) + { + status = HAL_TIMEOUT; + break; + } + } + } + + return status; +} + +/** + * @brief Check whether the Instruction Cache is enabled or not. + * @retval Status (0: disabled, 1: enabled) + */ +uint32_t HAL_ICACHE_IsEnabled(void) +{ + return ((READ_BIT(ICACHE->CR, ICACHE_CR_EN) != 0U) ? 1UL : 0UL); +} + +/** + * @brief Invalidate the Instruction Cache. + * @note This function waits for the end of cache invalidation procedure + * and clears the associated BSYENDF flag. + * @retval HAL status (HAL_OK/HAL_ERROR/HAL_TIMEOUT) + */ +HAL_StatusTypeDef HAL_ICACHE_Invalidate(void) +{ + HAL_StatusTypeDef status; + + /* Check if no ongoing operation */ + if (READ_BIT(ICACHE->SR, ICACHE_SR_BUSYF) == 0U) + { + /* Launch cache invalidation */ + SET_BIT(ICACHE->CR, ICACHE_CR_CACHEINV); + } + + status = HAL_ICACHE_WaitForInvalidateComplete(); + + return status; +} + +/** + * @brief Invalidate the Instruction Cache with interrupt. + * @note This function launches cache invalidation and returns. + * User application shall resort to interrupt generation to check + * the end of the cache invalidation with the BSYENDF flag and the + * HAL_ICACHE_InvalidateCompleteCallback() callback. + * @retval HAL status (HAL_OK/HAL_ERROR) + */ +HAL_StatusTypeDef HAL_ICACHE_Invalidate_IT(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check no ongoing operation */ + if (READ_BIT(ICACHE->SR, ICACHE_SR_BUSYF) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Make sure BSYENDF is reset before to start cache invalidation */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF); + + /* Enable end of cache invalidation interrupt */ + SET_BIT(ICACHE->IER, ICACHE_IER_BSYENDIE); + + /* Launch cache invalidation */ + SET_BIT(ICACHE->CR, ICACHE_CR_CACHEINV); + } + + return status; +} + +/** + * @brief Wait for the end of the Instruction Cache invalidate procedure. + * @note This function checks and clears the BSYENDF flag when set. + * @retval HAL status (HAL_OK/HAL_TIMEOUT) + */ +HAL_StatusTypeDef HAL_ICACHE_WaitForInvalidateComplete(void) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check if ongoing invalidation operation */ + if (READ_BIT(ICACHE->SR, ICACHE_SR_BUSYF) != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for end of cache invalidation */ + while (READ_BIT(ICACHE->SR, ICACHE_SR_BSYENDF) == 0U) + { + if ((HAL_GetTick() - tickstart) > ICACHE_INVALIDATE_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(ICACHE->SR, ICACHE_SR_BSYENDF) == 0U) + { + status = HAL_TIMEOUT; + break; + } + } + } + } + + /* Clear BSYENDF */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF); + + return status; +} + + +/** + * @brief Start the Instruction Cache performance monitoring. + * @param MonitorType Monitoring type + * This parameter can be one of the following values: + * @arg ICACHE_MONITOR_HIT_MISS Hit & Miss monitoring + * @arg ICACHE_MONITOR_HIT Hit monitoring + * @arg ICACHE_MONITOR_MISS Miss monitoring + * @retval HAL status (HAL_OK) + */ +HAL_StatusTypeDef HAL_ICACHE_Monitor_Start(uint32_t MonitorType) +{ + /* Check the parameters */ + assert_param(IS_ICACHE_MONITOR_TYPE(MonitorType)); + + SET_BIT(ICACHE->CR, MonitorType); + + return HAL_OK; +} + +/** + * @brief Stop the Instruction Cache performance monitoring. + * @note Stopping the monitoring does not reset the values. + * @param MonitorType Monitoring type + * This parameter can be one of the following values: + * @arg ICACHE_MONITOR_HIT_MISS Hit & Miss monitoring + * @arg ICACHE_MONITOR_HIT Hit monitoring + * @arg ICACHE_MONITOR_MISS Miss monitoring + * @retval HAL status (HAL_OK) + */ +HAL_StatusTypeDef HAL_ICACHE_Monitor_Stop(uint32_t MonitorType) +{ + /* Check the parameters */ + assert_param(IS_ICACHE_MONITOR_TYPE(MonitorType)); + + CLEAR_BIT(ICACHE->CR, MonitorType); + + return HAL_OK; +} + +/** + * @brief Reset the Instruction Cache performance monitoring values. + * @param MonitorType Monitoring type + * This parameter can be one of the following values: + * @arg ICACHE_MONITOR_HIT_MISS Hit & Miss monitoring + * @arg ICACHE_MONITOR_HIT Hit monitoring + * @arg ICACHE_MONITOR_MISS Miss monitoring + * @retval HAL status (HAL_OK) + */ +HAL_StatusTypeDef HAL_ICACHE_Monitor_Reset(uint32_t MonitorType) +{ + /* Check the parameters */ + assert_param(IS_ICACHE_MONITOR_TYPE(MonitorType)); + + /* Force/Release reset */ + SET_BIT(ICACHE->CR, (MonitorType << 2U)); + CLEAR_BIT(ICACHE->CR, (MonitorType << 2U)); + + return HAL_OK; +} + +/** + * @brief Get the Instruction Cache performance Hit monitoring value. + * @note Upon reaching the 32-bit maximum value, monitor does not wrap. + * @retval Hit monitoring value + */ +uint32_t HAL_ICACHE_Monitor_GetHitValue(void) +{ + return (ICACHE->HMONR); +} + +/** + * @brief Get the Instruction Cache performance Miss monitoring value. + * @note Upon reaching the 32-bit maximum value, monitor does not wrap. + * @retval Miss monitoring value + */ +uint32_t HAL_ICACHE_Monitor_GetMissValue(void) +{ + return (ICACHE->MMONR); +} + +/** + * @} + */ + +/** @defgroup ICACHE_Exported_Functions_Group2 IRQ and callback functions + * @brief IRQ and callback functions + * + @verbatim + ============================================================================== + ##### IRQ and callback functions ##### + ============================================================================== + [..] + This section provides functions allowing to handle ICACHE global interrupt + and the associated callback functions. + @endverbatim + * @{ + */ + +/** + * @brief Handle the Instruction Cache interrupt request. + * @note This function should be called under the ICACHE_IRQHandler(). + * @note This function respectively disables the interrupt and clears the + * flag of any pending flag before calling the associated user callback. + * @retval None + */ +void HAL_ICACHE_IRQHandler(void) +{ + /* Get current interrupt flags and interrupt sources value */ + uint32_t itflags = READ_REG(ICACHE->SR); + uint32_t itsources = READ_REG(ICACHE->IER); + + /* Check Instruction cache Error interrupt flag */ + if (((itflags & itsources) & ICACHE_FLAG_ERROR) != 0U) + { + /* Disable error interrupt */ + CLEAR_BIT(ICACHE->IER, ICACHE_IER_ERRIE); + + /* Clear ERR pending flag */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CERRF); + + /* Instruction cache error interrupt user callback */ + HAL_ICACHE_ErrorCallback(); + } + + /* Check Instruction cache BusyEnd interrupt flag */ + if (((itflags & itsources) & ICACHE_FLAG_BUSYEND) != 0U) + { + /* Disable end of cache invalidation interrupt */ + CLEAR_BIT(ICACHE->IER, ICACHE_IER_BSYENDIE); + + /* Clear BSYENDF pending flag */ + WRITE_REG(ICACHE->FCR, ICACHE_FCR_CBSYENDF); + + /* Instruction cache busyend interrupt user callback */ + HAL_ICACHE_InvalidateCompleteCallback(); + } +} + +/** + * @brief Cache invalidation complete callback. + */ +__weak void HAL_ICACHE_InvalidateCompleteCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_ICACHE_InvalidateCompleteCallback() should be implemented in the user file + */ +} + +/** + * @brief Error callback. + */ +__weak void HAL_ICACHE_ErrorCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_ICACHE_ErrorCallback() should be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* ICACHE && HAL_ICACHE_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_irda.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_irda.c new file mode 100644 index 000000000..fd90c36d3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_irda.c @@ -0,0 +1,3015 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_irda.c + * @author MCD Application Team + * @brief IRDA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the IrDA (Infrared Data Association) Peripheral + * (IRDA) + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The IRDA HAL driver can be used as follows: + + (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda). + (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API + in setting the associated USART or UART in IRDA mode: + (++) Enable the USARTx/UARTx interface clock. + (++) USARTx/UARTx pins configuration: + (+++) Enable the clock for the USARTx/UARTx GPIOs. + (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() + and HAL_IRDA_Receive_IT() APIs): + (+++) Configure the USARTx/UARTx interrupt priority. + (+++) Enable the NVIC USARTx/UARTx IRQ handle. + (+++) The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() + and HAL_IRDA_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter), + the normal or low power mode and the clock prescaler in the hirda handle Init structure. + + (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_IRDA_MspInit() API. + + -@@- The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() + (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA() + (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA() + (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** IRDA HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IRDA HAL driver. + + (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral + (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral + (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not + (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag + (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt + (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt + (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled + + [..] + (@) You can refer to the IRDA HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_IRDA_RegisterCallback() to register a user callback. + Function HAL_IRDA_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + + [..] + By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_IRDA_Init() + and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_IRDA_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_IRDA_RegisterCallback() before calling HAL_IRDA_DeInit() + or HAL_IRDA_Init() function. + + [..] + When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup IRDA IRDA + * @brief HAL IRDA module driver + * @{ + */ + +#ifdef HAL_IRDA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ +#define IRDA_TEACK_REACK_TIMEOUT 1000U /*!< IRDA TX or RX enable acknowledge time-out value */ + +#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \ + | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)) /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ IRDA clock source. + * @param __BAUD__ Baud rate set by the user. + * @param __PRESCALER__ IRDA clock prescaler value. + * @retval Division result + */ +#define IRDA_DIV_SAMPLING16(__PCLK__, __BAUD__, __PRESCALER__) ((((__PCLK__)/IRDAPrescTable[(__PRESCALER__)])\ + + ((__BAUD__)/2U)) / (__BAUD__)) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup IRDA_Private_Functions + * @{ + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +#if defined(HAL_DMA_MODULE_ENABLED) +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda); +#if defined(HAL_DMA_MODULE_ENABLED) +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAError(DMA_HandleTypeDef *hdma); +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + in asynchronous IRDA mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Power mode + (++) Prescaler setting + (++) Receiver/transmitter modes + + [..] + The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible IRDA frame formats are listed in the + following table. + + Table 1. IRDA frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | IRDA frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the IRDA mode according to the specified + * parameters in the IRDA_InitTypeDef and initialize the associated handle. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + if (hirda->gState == HAL_IRDA_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hirda->Lock = HAL_UNLOCKED; + +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + IRDA_InitCallbacksToDefault(hirda); + + if (hirda->MspInitCallback == NULL) + { + hirda->MspInitCallback = HAL_IRDA_MspInit; + } + + /* Init the low level hardware */ + hirda->MspInitCallback(hirda); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_IRDA_MspInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* Disable the Peripheral to update the configuration registers */ + __HAL_IRDA_DISABLE(hirda); + + /* Set the IRDA Communication parameters */ + if (IRDA_SetConfig(hirda) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* set the UART/USART in IRDA mode */ + hirda->Instance->CR3 |= USART_CR3_IREN; + + /* Enable the Peripheral */ + __HAL_IRDA_ENABLE(hirda); + + /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */ + return (IRDA_CheckIdleState(hirda)); +} + +/** + * @brief DeInitialize the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* DeInit the low level hardware */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + if (hirda->MspDeInitCallback == NULL) + { + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + } + /* DeInit the low level hardware */ + hirda->MspDeInitCallback(hirda); +#else + HAL_IRDA_MspDeInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + /* Disable the Peripheral */ + __HAL_IRDA_DISABLE(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_RESET; + hirda->RxState = HAL_IRDA_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Initialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User IRDA Callback + * To be used to override the weak predefined callback + * @note The HAL_IRDA_RegisterCallback() may be called before HAL_IRDA_Init() in HAL_IRDA_STATE_RESET + * to register callbacks for HAL_IRDA_MSPINIT_CB_ID and HAL_IRDA_MSPDEINIT_CB_ID + * @param hirda irda handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hirda->gState == HAL_IRDA_STATE_READY) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = pCallback; + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = pCallback; + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hirda->gState == HAL_IRDA_STATE_RESET) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an IRDA callback + * IRDA callback is redirected to the weak predefined callback + * @note The HAL_IRDA_UnRegisterCallback() may be called before HAL_IRDA_Init() in HAL_IRDA_STATE_RESET + * to un-register callbacks for HAL_IRDA_MSPINIT_CB_ID and HAL_IRDA_MSPDEINIT_CB_ID + * @param hirda irda handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_IRDA_STATE_READY == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_IRDA_STATE_RESET == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions + * @brief IRDA Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the IRDA data transfers. + + [..] + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + [..] + (#) There are two modes of transfer: + (++) Blocking mode: the communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: the communication is performed using Interrupts + or DMA, these API's return the HAL status. + The end of the data processing will be indicated through the + dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected + + (#) Blocking mode APIs are : + (++) HAL_IRDA_Transmit() + (++) HAL_IRDA_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_IRDA_Transmit_IT() + (++) HAL_IRDA_Receive_IT() + (++) HAL_IRDA_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_IRDA_Transmit_DMA() + (++) HAL_IRDA_Receive_DMA() + (++) HAL_IRDA_DMAPause() + (++) HAL_IRDA_DMAResume() + (++) HAL_IRDA_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode: + (++) HAL_IRDA_TxHalfCpltCallback() + (++) HAL_IRDA_TxCpltCallback() + (++) HAL_IRDA_RxHalfCpltCallback() + (++) HAL_IRDA_RxCpltCallback() + (++) HAL_IRDA_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_IRDA_Abort() + (++) HAL_IRDA_AbortTransmit() + (++) HAL_IRDA_AbortReceive() + (++) HAL_IRDA_Abort_IT() + (++) HAL_IRDA_AbortTransmit_IT() + (++) HAL_IRDA_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_IRDA_AbortCpltCallback() + (++) HAL_IRDA_AbortTransmitCpltCallback() + (++) HAL_IRDA_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. + Transfer is kept ongoing on IRDA side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and + HAL_IRDA_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (hirda->TxXferCount > 0U) + { + hirda->TxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + hirda->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + hirda->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + } + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + uhMask = hirda->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Check data remaining to be received */ + while (hirda->RxXferCount > 0U) + { + hirda->RxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(hirda->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + } + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Transmit Data Register Empty Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to the RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the IRDA Parity Error and Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + /* Enable the IRDA Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + uint16_t nbByte = Size; + + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmatx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmatx->XferAbortCallback = NULL; + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size multiplied by 2 */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + if ((hirda->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hirda->hdmatx->LinkedListQueue != NULL) && (hirda->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + hirda->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + hirda->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)hirda->pTxBuffPtr; + + /* Set DMA destination address */ + hirda->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&hirda->Instance->TDR; + + /* Enable the IRDA transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(hirda->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the IRDA transmit DMA channel */ + status = HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, nbByte); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->gState to ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @note When the IRDA parity is enabled (PCE = 1), the received data contains + * the parity bit (MSB position). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + uint16_t nbByte = Size; + + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmarx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmarx->XferAbortCallback = NULL; + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size multiplied by 2 */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + if ((hirda->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hirda->hdmarx->LinkedListQueue != NULL) && (hirda->hdmarx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + hirda->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + hirda->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&hirda->Instance->RDR; + + /* Set DMA destination address */ + hirda->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hirda->pRxBuffPtr; + + /* Enable the DMA channel */ + status = HAL_DMAEx_List_Start_IT(hirda->hdmarx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, nbByte); + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the UART Parity Error Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->RxState to ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Pause the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the IRDA DMA Tx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + /* Enable the IRDA DMA Tx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the IRDA DMA Rx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() / + HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel */ + if (hirda->hdmatx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndRxTransfer(hirda); + } + } + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hirda->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback; + } + else + { + hirda->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hirda->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback; + } + else + { + hirda->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* IRDA Tx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + hirda->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* IRDA Rx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + hirda->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */ + hirda->hdmatx->XferAbortCallback(hirda->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle IRDA interrupt request. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) +{ + uint32_t isrflags = READ_REG(hirda->Instance->ISR); + uint32_t cr1its = READ_REG(hirda->Instance->CR1); + uint32_t cr3its; + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + if (errorflags == 0U) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + return; + } + } + + /* If some errors occur */ + cr3its = READ_REG(hirda->Instance->CR3); + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* IRDA parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_PE; + } + + /* IRDA frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_FE; + } + + /* IRDA noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_NE; + } + + /* IRDA Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) && + (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; + } + + /* Call IRDA Error Call back function if need be --------------------------*/ + if (hirda->ErrorCode != HAL_IRDA_ERROR_NONE) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = hirda->ErrorCode; + if ((HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & HAL_IRDA_ERROR_ORE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the IRDA state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + IRDA_EndRxTransfer(hirda); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* IRDA in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) && ((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U)) + { + IRDA_Transmit_IT(hirda); + return; + } + + /* IRDA in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + IRDA_EndTransmit_IT(hirda); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA error callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Receive Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @brief IRDA State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of IrDA + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state + of the IRDA peripheral handle. + (+) HAL_IRDA_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the IRDA handle state. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL state + */ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(const IRDA_HandleTypeDef *hirda) +{ + /* Return IRDA handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hirda->gState; + temp2 = (uint32_t)hirda->RxState; + + return (HAL_IRDA_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the IRDA handle error code. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval IRDA Error Code + */ +uint32_t HAL_IRDA_GetError(const IRDA_HandleTypeDef *hirda) +{ + return hirda->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hirda IRDA handle. + * @retval none + */ +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda) +{ + /* Init the IRDA Callback settings */ + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @brief Configure the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) +{ + uint32_t tmpreg; + IRDA_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the communication parameters */ + assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); + assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); + assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); + assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode)); + assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); + assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); + assert_param(IS_IRDA_CLOCKPRESCALER(hirda->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the IRDA Word Length, Parity and transfer Mode: + Set the M bits according to hirda->Init.WordLength value + Set PCE and PS bits according to hirda->Init.Parity value + Set TE and RE bits according to hirda->Init.Mode value */ + tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ; + + MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode); + + /*--------------------- USART clock PRESC Configuration ----------------*/ + /* Configure + * - IRDA Clock Prescaler: set PRESCALER according to hirda->Init.ClockPrescaler value */ + MODIFY_REG(hirda->Instance->PRESC, USART_PRESC_PRESCALER, hirda->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + IRDA_GETCLOCKSOURCE(hirda, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case IRDA_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_CSI: + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(CSI_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_HSI: + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(HSI_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_LSE: + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16((uint32_t)LSE_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hirda->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + return ret; +} + +/** + * @brief Check the IRDA Idle State. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda) +{ + uint32_t tickstart; + + /* Initialize the IRDA ErrorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the IRDA state*/ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Handle IRDA Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param Flag Specifies the IRDA flag to check. + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA IRDA transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + hirda->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + +} + +/** + * @brief DMA IRDA transmit process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half complete callback */ + hirda->TxHalfCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + hirda->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + } + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA IRDA receive process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + hirda->RxHalfCpltCallback(hirda); +#else + /* Call legacy weak Rx Half complete callback */ + HAL_IRDA_RxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->TxXferCount = 0U; + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->RxXferCount = 0U; + IRDA_EndRxTransfer(hirda); + } + } + + hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + hirda->RxXferCount = 0U; + hirda->TxXferCount = 0U; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmarx != NULL) + { + if (hirda->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmatx != NULL) + { + if (hirda->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Send an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Transmit_IT(). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (hirda->TxXferCount == 0U) + { + /* Disable the IRDA Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + else + { + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (const uint16_t *) hirda->pTxBuffPtr; /* Derogation R.11.3 */ + hirda->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + hirda->pTxBuffPtr += 2U; + } + else + { + hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr & 0xFFU); + hirda->pTxBuffPtr++; + } + hirda->TxXferCount--; + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable the IRDA Transmit Complete Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Receive_IT() + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t *tmp; + uint16_t uhMask = hirda->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(hirda->Instance->RDR); + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (uint16_t *) hirda->pRxBuffPtr; /* Derogation R.11.3 */ + *tmp = (uint16_t)(uhdata & uhMask); + hirda->pRxBuffPtr += 2U; + } + else + { + *hirda->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + hirda->pRxBuffPtr++; + } + + hirda->RxXferCount--; + if (hirda->RxXferCount == 0U) + { + /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_IRDA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_iwdg.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_iwdg.c new file mode 100644 index 000000000..2ae9f3208 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_iwdg.c @@ -0,0 +1,510 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_iwdg.c + * @author MCD Application Team + * @brief IWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Independent Watchdog (IWDG) peripheral: + * + Initialization and Start functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### IWDG Generic features ##### + ============================================================================== + [..] + (+) The IWDG can be started by either software or hardware (configurable + through option byte). + + (+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays + active even if the main clock fails. + + (+) Once the IWDG is started, the LSI is forced ON and both cannot be + disabled. The counter starts counting down from the reset value (0xFFF). + When it reaches the end of count value (0x000) a reset signal is + generated (IWDG reset). + + (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register, + the IWDG_RLR value is reloaded into the counter and the watchdog reset + is prevented. + + (+) The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY). + IWDGRST flag in RCC_CSR register can be used to inform when an IWDG + reset occurs. + + (+) Debug mode: When the microcontroller enters debug mode (core halted), + the IWDG counter either continues to work normally or stops, depending + on DBG_IWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros. + + [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s + The IWDG timeout may vary due to LSI clock frequency dispersion. + STM32H7RSxx devices provide the capability to measure the LSI clock + frequency (LSI clock is internally connected to TIM16 CH1 input capture). + The measured value can be used to have an IWDG timeout with an + acceptable accuracy. + + [..] Default timeout value (necessary for IWDG_SR status register update): + Constant LSI_VALUE is defined based on the nominal LSI clock frequency. + This frequency being subject to variations as mentioned above, the + default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT + below) may become too short or too long. + In such cases, this default timeout value can be tuned by redefining + the constant LSI_VALUE at user-application level (based, for instance, + on the measured LSI clock frequency as explained above). + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Register callback to treat Iwdg interrupt and MspInit using HAL_IWDG_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + HAL_IWDG_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Use IWDG using HAL_IWDG_Init() function to : + (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI + clock is forced ON and IWDG counter starts counting down. + (++) Enable write access to configuration registers: + IWDG_PR, IWDG_RLR, IWDG_WINR and EWCR. + (++) Configure the IWDG prescaler and counter reload value. This reload + value will be loaded in the IWDG counter each time the watchdog is + reloaded, then the IWDG will start counting down from this value. + (++) Depending on window parameter: + (+++) If Window Init parameter is same as Window register value, + nothing more is done but reload counter value in order to exit + function with exact time base. + (+++) Else modify Window register. This will automatically reload + watchdog counter. + (++) Depending on Early Wakeup Interrupt parameter: + (+++) If EWI is set to disable, comparator is set to 0, interrupt is + disable & flag is clear. + (+++) Else modify EWCR register, setting comparator value, enable + interrupt & clear flag. + (++) Wait for status flags to be reset. + + (#) Then the application program must refresh the IWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_IWDG_Refresh() function. + + *** IWDG HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IWDG HAL driver: + (+) __HAL_IWDG_START: Enable the IWDG peripheral + (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in + the reload register + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_IWDG_MODULE_ENABLED +/** @addtogroup IWDG + * @brief IWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Defines IWDG Private Defines + * @{ + */ +/* Status register needs up to 5 LSI clock periods to be updated. However a + synchronisation is added on prescaled LSI clock rising edge, so we only + consider a highest prescaler cycle. + The timeout value is calculated using the highest prescaler (1024) and + the LSI_VALUE constant. The value of this constant can be changed by the user + to take into account possible LSI clock period variations. + The timeout value is multiplied by 1000 to be converted in milliseconds. + LSI startup time is also considered here by adding LSI_STARTUP_TIME + converted in milliseconds. */ +#define HAL_IWDG_DEFAULT_TIMEOUT (((1UL * 1024UL * 1000UL) / LSI_VALUE) + ((LSI_STARTUP_TIME / 1000UL) + 1UL)) +#define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_EWU | IWDG_SR_WVU | IWDG_SR_RVU | IWDG_SR_PVU) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IWDG_Exported_Functions + * @{ + */ + +/** @addtogroup IWDG_Exported_Functions_Group1 + * @brief Initialization and Start functions. + * +@verbatim + =============================================================================== + ##### Initialization and Start functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the IWDG according to the specified parameters in the + IWDG_InitTypeDef of associated handle. + (+) Manage Window option. + (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog + is reloaded in order to exit function with correct time base. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the IWDG according to the specified parameters in the + * IWDG_InitTypeDef and start watchdog. Before exiting function, + * watchdog is refreshed in order to have correct time base. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) +{ + uint32_t tickstart; + + /* Check the IWDG handle allocation */ + if (hiwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); + assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); + assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); + assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window)); + assert_param(IS_IWDG_EWI(hiwdg->Init.EWI)); + +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers */ + if (hiwdg->EwiCallback == NULL) + { + hiwdg->EwiCallback = HAL_IWDG_EarlyWakeupCallback; + } + if (hiwdg->MspInitCallback == NULL) + { + hiwdg->MspInitCallback = HAL_IWDG_MspInit; + } + + /* Init the low level hardware */ + hiwdg->MspInitCallback(hiwdg); +#else + /* Init the low level hardware */ + HAL_IWDG_MspInit(hiwdg); +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ + + /* Enable IWDG. LSI is turned on automatically */ + __HAL_IWDG_START(hiwdg); + + /* Enable write access to IWDG_PR, IWDG_RLR, IWDG_WINR and EWCR registers by writing + 0x5555 in KR */ + IWDG_ENABLE_WRITE_ACCESS(hiwdg); + + /* Write to IWDG registers the Prescaler & Reload values to work with */ + hiwdg->Instance->PR = hiwdg->Init.Prescaler; + hiwdg->Instance->RLR = hiwdg->Init.Reload; + + /* Check Reload update flag, before performing any reload of the counter, else previous value + will be taken. */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while ((hiwdg->Instance->SR & IWDG_SR_RVU) != 0x00u) + { + if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT) + { + if ((hiwdg->Instance->SR & IWDG_SR_RVU) != 0x00u) + { + return HAL_TIMEOUT; + } + } + } + + if (hiwdg->Init.EWI == IWDG_EWI_DISABLE) + { + /* EWI comparator value equal 0, disable the early wakeup interrupt + * acknowledge the early wakeup interrupt in any cases. it clears the EWIF flag in SR register + * Set Watchdog Early Wakeup Comparator to 0x00 */ + hiwdg->Instance->EWCR = IWDG_EWCR_EWIC; + } + else + { + /* EWI comparator value different from 0, enable the early wakeup interrupt, + * acknowledge the early wakeup interrupt in any cases. it clears the EWIF flag in SR register + * Set Watchdog Early Wakeup Comparator value */ + hiwdg->Instance->EWCR = IWDG_EWCR_EWIE | IWDG_EWCR_EWIC | hiwdg->Init.EWI; + } + + /* Check pending flag, if previous update not done, return timeout */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT) + { + if ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + return HAL_TIMEOUT; + } + } + } + + /* If window parameter is different than current value, modify window + register */ + if (hiwdg->Instance->WINR != hiwdg->Init.Window) + { + /* Write to IWDG WINR the IWDG_Window value to compare with. In any case, + even if window feature is disabled, Watchdog will be reloaded by writing + windows register */ + hiwdg->Instance->WINR = hiwdg->Init.Window; + } + else + { + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Initialize the IWDG MSP. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @note When rewriting this function in user file, mechanism may be added + * to avoid multiple initialize when HAL_IWDG_Init function is called + * again to change parameters. + * @retval None + */ +__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hiwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IWDG_MspInit could be implemented in the user file + */ +} + + +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User IWDG Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hiwdg IWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_IWDG_MSPINIT_CB_ID MspInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_IWDG_RegisterCallback(IWDG_HandleTypeDef *hiwdg, HAL_IWDG_CallbackIDTypeDef CallbackID, + pIWDG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + status = HAL_ERROR; + } + else + { + switch (CallbackID) + { + case HAL_IWDG_EWI_CB_ID: + hiwdg->EwiCallback = pCallback; + break; + case HAL_IWDG_MSPINIT_CB_ID: + hiwdg->MspInitCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + + return status; +} + + +/** + * @brief Unregister a IWDG Callback + * IWDG Callback is redirected to the weak (surcharged) predefined callback + * @param hiwdg IWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_IWDG_MSPINIT_CB_ID MspInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_IWDG_UnRegisterCallback(IWDG_HandleTypeDef *hiwdg, HAL_IWDG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_IWDG_EWI_CB_ID: + hiwdg->EwiCallback = HAL_IWDG_EarlyWakeupCallback; + break; + case HAL_IWDG_MSPINIT_CB_ID: + hiwdg->MspInitCallback = HAL_IWDG_MspInit; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ + + +/** + * @} + */ + + +/** @addtogroup IWDG_Exported_Functions_Group2 + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Refresh the IWDG. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the IWDG. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) +{ + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Get back IWDG running status + * @note This API allows to know if IWDG has been started by other master, thread + * or by hardware. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval can be one of following value : + * @arg @ref IWDG_STATUS_DISABLE + * @arg @ref IWDG_STATUS_ENABLE + */ +uint32_t HAL_IWDG_GetActiveStatus(const IWDG_HandleTypeDef *hiwdg) +{ + uint32_t status; + + /* Get back ONF flag */ + status = (hiwdg->Instance->SR & IWDG_SR_ONF); + + /* Return status */ + return status; +} + + +/** + * @brief Handle IWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled by calling HAL_IWDG_Init function with + * EWIMode set to IWDG_EWI_ENABLE. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval None + */ +void HAL_IWDG_IRQHandler(IWDG_HandleTypeDef *hiwdg) +{ + /* Check if IWDG Early Wakeup Interrupt occurred */ + if ((hiwdg->Instance->SR & IWDG_SR_EWIF) != 0x00u) + { + /* Clear the IWDG Early Wakeup flag */ + hiwdg->Instance->EWCR |= IWDG_EWCR_EWIC; + +#if (USE_HAL_IWDG_REGISTER_CALLBACKS == 1) + /* Early Wakeup registered callback */ + hiwdg->EwiCallback(hiwdg); +#else + /* Early Wakeup callback */ + HAL_IWDG_EarlyWakeupCallback(hiwdg); +#endif /* USE_HAL_IWDG_REGISTER_CALLBACKS */ + } +} + + +/** + * @brief IWDG Early Wakeup callback. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval None + */ +__weak void HAL_IWDG_EarlyWakeupCallback(IWDG_HandleTypeDef *hiwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hiwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IWDG_EarlyWakeupCallback could be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_IWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_jpeg.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_jpeg.c new file mode 100644 index 000000000..df86ffc7e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_jpeg.c @@ -0,0 +1,4280 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_jpeg.c + * @author MCD Application Team + * @brief JPEG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the JPEG encoder/decoder peripheral: + * + Initialization and de-initialization functions + * + JPEG processing functions encoding and decoding + * + JPEG decoding Getting Info and encoding configuration setting + * + JPEG enable/disable header parsing functions (for decoding) + * + JPEG Input/Output Buffer configuration. + * + JPEG callback functions + * + JPEG Abort/Pause/Resume functions + * + JPEG custom quantization tables setting functions + * + IRQ handler management + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the JPEG peripheral using HAL_JPEG_Init : No initialization parameters are required. + Only the call to HAL_JPEG_Init is necessary to initialize the JPEG peripheral. + + (#) If operation is JPEG encoding use function HAL_JPEG_ConfigEncoding to set + the encoding parameters (mandatory before calling the encoding function). + the application can change the encoding parameter ImageQuality from + 1 to 100 to obtain a more or less quality (visual quality vs the original row image), + and inversely more or less jpg file size. + + (#) Note that for decoding operation the JPEG peripheral output data are organized in + YCbCr blocks called MCU (Minimum Coded Unit) as defioned in the JPEG specification + ISO/IEC 10918-1 standard. + It is up to the application to transform these YCbCr blocks to RGB data that can be display. + + Respectively, for Encoding operation the JPEG peripheral input should be organized + in YCbCr MCU blocks. It is up to the application to perform the necessary RGB to YCbCr + MCU blocks transformation before feeding the JPEG peripheral with data. + + (#) Use functions HAL_JPEG_Encode and HAL_JPEG_Decode to start respectively + a JPEG encoding/decoding operation in polling method (blocking). + + (#) Use functions HAL_JPEG_Encode_IT and HAL_JPEG_Decode_IT to start respectively + a JPEG encoding/decoding operation with Interrupt method (not blocking). + + (#) Use functions HAL_JPEG_Encode_DMA and HAL_JPEG_Decode_DMA to start respectively + a JPEG encoding/decoding operation with DMA method (not blocking). + + (#) Callback HAL_JPEG_InfoReadyCallback is asserted if the current operation + is a JPEG decoding to provide the application with JPEG image parameters. + This callback is asserted when the JPEG peripheral successfully parse the + JPEG header. + + (#) Callback HAL_JPEG_GetDataCallback is asserted for both encoding and decoding + operations to inform the application that the input buffer has been + consumed by the peripheral and to ask for a new data chunk if the operation + (encoding/decoding) has not been complete yet. + + (++) This CallBack should be implemented in the application side. It should + call the function HAL_JPEG_ConfigInputBuffer if new input data are available, + or call HAL_JPEG_Pause with parameter XferSelection set to JPEG_PAUSE_RESUME_INPUT + to inform the JPEG HAL driver that the ongoing operation shall pause waiting for the + application to provide a new input data chunk. + Once the application succeed getting new data and if the input has been paused, + the application can call the function HAL_JPEG_ConfigInputBuffer to set the new + input buffer and size, then resume the JPEG HAL input by calling new function HAL_JPEG_Resume. + If the application has ended feeding the HAL JPEG with input data (no more input data), the application + Should call the function HAL_JPEG_ConfigInputBuffer (within the callback HAL_JPEG_GetDataCallback) + with the parameter InDataLength set to zero. + + (++) The mechanism of HAL_JPEG_ConfigInputBuffer/HAL_JPEG_Pause/HAL_JPEG_Resume allows + to the application to provide the input data (for encoding or decoding) by chunks. + If the new input data chunk is not available (because data should be read from an input file + for example) the application can pause the JPEG input (using function HAL_JPEG_Pause) + Once the new input data chunk is available ( read from a file for example), the application + can call the function HAL_JPEG_ConfigInputBuffer to provide the HAL with the new chunk + then resume the JPEG HAL input by calling function HAL_JPEG_Resume. + + (++) The application can call functions HAL_JPEG_ConfigInputBuffer then HAL_JPEG_Resume. + any time (outside the HAL_JPEG_GetDataCallback) Once the new input chunk data available. + However, to keep data coherency, the function HAL_JPEG_Pause must be imperatively called + (if necessary) within the callback HAL_JPEG_GetDataCallback, i.e when the HAL JPEG has ended + Transferring the previous chunk buffer to the JPEG peripheral. + + (#) Callback HAL_JPEG_DataReadyCallback is asserted when the HAL JPEG driver + has filled the given output buffer with the given size. + + (++) This CallBack should be implemented in the application side. It should + call the function HAL_JPEG_ConfigOutputBuffer to provide the HAL JPEG driver + with the new output buffer location and size to be used to store next data chunk. + if the application is not ready to provide the output chunk location then it can + call the function HAL_JPEG_Pause with parameter XferSelection set to JPEG_PAUSE_RESUME_OUTPUT + to inform the JPEG HAL driver that it shall pause output data. Once the application + is ready to receive the new data chunk (output buffer location free or available) it should call + the function HAL_JPEG_ConfigOutputBuffer to provide the HAL JPEG driver + with the new output chunk buffer location and size, then call HAL_JPEG_Resume + to inform the HAL that it shall resume outputting data in the given output buffer. + + (++) The mechanism of HAL_JPEG_ConfigOutputBuffer/HAL_JPEG_Pause/HAL_JPEG_Resume allows + the application to receive data from the JPEG peripheral by chunks. when a chunk + is received, the application can pause the HAL JPEG output data to be able to process + these received data (YCbCr to RGB conversion in case of decoding or data storage in case + of encoding). + + (++) The application can call functions HAL_JPEG_ ConfigOutputBuffer then HAL_JPEG_Resume. + any time (outside the HAL_JPEG_DataReadyCallback) Once the output data buffer is free to use. + However, to keep data coherency, the function HAL_JPEG_Pause must be imperatively called + (if necessary) within the callback HAL_JPEG_ DataReadyCallback, i.e when the HAL JPEG has ended + Transferring the previous chunk buffer from the JPEG peripheral to the application. + + (#) Callback HAL_JPEG_EncodeCpltCallback is asserted when the HAL JPEG driver has + ended the current JPEG encoding operation, and all output data has been transmitted + to the application. + + (#) Callback HAL_JPEG_DecodeCpltCallback is asserted when the HAL JPEG driver has + ended the current JPEG decoding operation. and all output data has been transmitted + to the application. + + (#) Callback HAL_JPEG_ErrorCallback is asserted when an error occurred during + the current operation. the application can call the function HAL_JPEG_GetError() + to retrieve the error codes. + + (#) By default the HAL JPEG driver uses the default quantization tables + as provide in the JPEG specification (ISO/IEC 10918-1 standard) for encoding. + User can change these default tables if necessary using the function HAL_JPEG_SetUserQuantTables + Note that for decoding the quantization tables are automatically extracted from + the JPEG header. + + (#) To control JPEG state you can use the following function: HAL_JPEG_GetState() + + *** JPEG HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in JPEG HAL driver. + + (+) __HAL_JPEG_RESET_HANDLE_STATE : Reset JPEG handle state. + (+) __HAL_JPEG_ENABLE : Enable the JPEG peripheral. + (+) __HAL_JPEG_DISABLE : Disable the JPEG peripheral. + (+) __HAL_JPEG_GET_FLAG : Check the specified JPEG status flag. + (+) __HAL_JPEG_CLEAR_FLAG : Clear the specified JPEG status flag. + (+) __HAL_JPEG_ENABLE_IT : Enable the specified JPEG Interrupt. + (+) __HAL_JPEG_DISABLE_IT : Disable the specified JPEG Interrupt. + (+) __HAL_JPEG_GET_IT_SOURCE : returns the state of the specified JPEG Interrupt (Enabled or disabled). + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_JPEG_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_JPEG_RegisterCallback() or HAL_JPEG_RegisterXXXCallback() + to register an interrupt callback. + + Function HAL_JPEG_RegisterCallback() allows to register following callbacks: + (+) EncodeCpltCallback : callback for end of encoding operation. + (+) DecodeCpltCallback : callback for end of decoding operation. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : JPEG MspInit. + (+) MspDeInitCallback : JPEG MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks InfoReadyCallback, GetDataCallback and DataReadyCallback use dedicated + register callbacks : respectively HAL_JPEG_RegisterInfoReadyCallback(), + HAL_JPEG_RegisterGetDataCallback() and HAL_JPEG_RegisterDataReadyCallback(). + + Use function HAL_JPEG_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_JPEG_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) EncodeCpltCallback : callback for end of encoding operation. + (+) DecodeCpltCallback : callback for end of decoding operation. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : JPEG MspInit. + (+) MspDeInitCallback : JPEG MspDeInit. + + For callbacks InfoReadyCallback, GetDataCallback and DataReadyCallback use dedicated + unregister callbacks : respectively HAL_JPEG_UnRegisterInfoReadyCallback(), + HAL_JPEG_UnRegisterGetDataCallback() and HAL_JPEG_UnRegisterDataReadyCallback(). + + By default, after the HAL_JPEG_Init() and when the state is HAL_JPEG_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples HAL_JPEG_DecodeCpltCallback() , HAL_JPEG_GetDataCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_JPEG_Init()/ HAL_JPEG_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_JPEG_Init() / HAL_JPEG_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + Callbacks can be registered/unregistered in HAL_JPEG_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_JPEG_STATE_READY or HAL_JPEG_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_JPEG_RegisterCallback() before calling HAL_JPEG_DeInit() + or HAL_JPEG_Init() function. + + When The compilation define USE_HAL_JPEG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_JPEG_MODULE_ENABLED + +#if defined (JPEG) + +/** @defgroup JPEG JPEG + * @brief JPEG HAL module driver. + * @{ + */ + +/* Private define ------------------------------------------------------------*/ +/** @addtogroup JPEG_Private_Constants + * @{ + */ +#define JPEG_TIMEOUT_VALUE ((uint32_t)1000) /* 1s */ +#define JPEG_AC_HUFF_TABLE_SIZE ((uint32_t)162) /* Huffman AC table size : 162 codes*/ +#define JPEG_DC_HUFF_TABLE_SIZE ((uint32_t)12) /* Huffman DC table size : 12 codes*/ + +#define JPEG_QUANTVAL_MAX ((uint32_t)255) /* Quantization values are 8-bit numbers*/ +#define JPEG_LOW_QUALITY_REFERENCE ((uint32_t)5000) /*Reference value to generate scaling factor + for low quality factors (<50) */ +#define JPEG_HIGH_QUALITY_REFERENCE ((uint32_t)200) /*Reference value to generate scaling factor + for high quality factors (>=50)*/ + +#define JPEG_FIFO_SIZE ((uint32_t)16U) /* JPEG Input/Output HW FIFO size in words*/ + +#define JPEG_FIFO_TH_SIZE ((uint32_t)4U) /* JPEG Input/Output HW FIFO Threshold in words*/ + +#define JPEG_DMA_MASK ((uint32_t)0x00001800) /* JPEG DMA request Mask*/ +#define JPEG_DMA_IDMA ((uint32_t)JPEG_CR_IDMAEN) /* DMA request for the input FIFO */ +#define JPEG_DMA_ODMA ((uint32_t)JPEG_CR_ODMAEN) /* DMA request for the output FIFO */ + +#define JPEG_INTERRUPT_MASK ((uint32_t)0x0000007EU) /* JPEG Interrupt Mask*/ + +#define JPEG_CONTEXT_ENCODE ((uint32_t)0x00000001) /* JPEG context : operation is encoding*/ +#define JPEG_CONTEXT_DECODE ((uint32_t)0x00000002) /* JPEG context : operation is decoding*/ +#define JPEG_CONTEXT_OPERATION_MASK ((uint32_t)0x00000003) /* JPEG context : operation Mask */ + +#define JPEG_CONTEXT_POLLING ((uint32_t)0x00000004) /* JPEG context : Transfer use Polling */ +#define JPEG_CONTEXT_IT ((uint32_t)0x00000008) /* JPEG context : Transfer use Interrupt */ +#define JPEG_CONTEXT_DMA ((uint32_t)0x0000000C) /* JPEG context : Transfer use DMA */ +#define JPEG_CONTEXT_METHOD_MASK ((uint32_t)0x0000000C) /* JPEG context : Transfer Mask */ + + +#define JPEG_CONTEXT_CONF_ENCODING ((uint32_t)0x00000100) /* JPEG context : encoding config done */ + +#define JPEG_CONTEXT_PAUSE_INPUT ((uint32_t)0x00001000) /* JPEG context : Pause Input */ +#define JPEG_CONTEXT_PAUSE_OUTPUT ((uint32_t)0x00002000) /* JPEG context : Pause Output */ + +#define JPEG_CONTEXT_CUSTOM_TABLES ((uint32_t)0x00004000) /* JPEG context : Use custom quantization tables */ + +#define JPEG_CONTEXT_ENDING_DMA ((uint32_t)0x00008000) /* JPEG context : ending with DMA in progress */ + +#define JPEG_PROCESS_ONGOING ((uint32_t)0x00000000) /* Process is on going */ +#define JPEG_PROCESS_DONE ((uint32_t)0x00000001) /* Process is done (ends) */ +#define JPEG_GET_DMA_REMAIN_DATA(__HANDLE__) (__HAL_DMA_GET_COUNTER(__HANDLE__)\ + + HAL_DMAEx_GetFifoLevel(__HANDLE__)) +/** + * @} + */ + +/* Private typedef -----------------------------------------------------------*/ +/** @addtogroup JPEG_Private_Types + * @{ + */ + +/* + JPEG Huffman Table Structure definition : + This implementation of Huffman table structure is compliant with ISO/IEC 10918-1 standard, + Annex C Huffman Table specification + */ +typedef struct +{ + /* These two fields directly represent the contents of a JPEG DHT marker */ + uint8_t Bits[16]; /*!< bits[k] = # of symbols with codes of length k bits, + this parameter corresponds to BITS list in the Annex C */ + + uint8_t HuffVal[162]; /*!< The symbols, in order of incremented code length, + this parameter corresponds to HUFFVAL list in the Annex C */ + + +} JPEG_ACHuffTableTypeDef; + +typedef struct +{ + /* These two fields directly represent the contents of a JPEG DHT marker */ + uint8_t Bits[16]; /*!< bits[k] = # of symbols with codes of length k bits, + this parameter corresponds to BITS list in the Annex C */ + + uint8_t HuffVal[12]; /*!< The symbols, in order of incremented code length, + this parameter corresponds to HUFFVAL list in the Annex C */ + + +} JPEG_DCHuffTableTypeDef; + +typedef struct +{ + uint8_t CodeLength[JPEG_AC_HUFF_TABLE_SIZE]; /*!< Code length */ + + uint32_t HuffmanCode[JPEG_AC_HUFF_TABLE_SIZE]; /*!< HuffmanCode */ + +} JPEG_AC_HuffCodeTableTypeDef; + +typedef struct +{ + uint8_t CodeLength[JPEG_DC_HUFF_TABLE_SIZE]; /*!< Code length */ + + uint32_t HuffmanCode[JPEG_DC_HUFF_TABLE_SIZE]; /*!< HuffmanCode */ + +} JPEG_DC_HuffCodeTableTypeDef; +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup JPEG_Private_Macros + * @{ + */ +#define JPEG_ENABLE_DMA(__HANDLE__,__DMA__) ((__HANDLE__)->Instance->CR |= ((__DMA__) & JPEG_DMA_MASK)) +/*note : To disable a DMA request we must use MODIFY_REG macro to avoid writing "1" to the FIFO flush bits + located in the same DMA request enable register (CR register). */ +#define JPEG_DISABLE_DMA(__HANDLE__,__DMA__) MODIFY_REG((__HANDLE__)->Instance->CR, ((__DMA__) & JPEG_DMA_MASK), 0UL) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup JPEG_Private_Variables + * @{ + */ + +static const JPEG_DCHuffTableTypeDef JPEG_DCLUM_HuffTable = +{ + { 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, /*Bits*/ + + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb } /*HUFFVAL */ + +}; + +static const JPEG_DCHuffTableTypeDef JPEG_DCCHROM_HuffTable = +{ + { 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }, /*Bits*/ + + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb } /*HUFFVAL */ +}; + +static const JPEG_ACHuffTableTypeDef JPEG_ACLUM_HuffTable = +{ + { 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }, /*Bits*/ + + { + 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, /*HUFFVAL */ + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa + } +}; + +static const JPEG_ACHuffTableTypeDef JPEG_ACCHROM_HuffTable = +{ + { 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }, /*Bits*/ + + { + 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, /*HUFFVAL */ + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa + } +}; + +static const uint8_t JPEG_ZIGZAG_ORDER[JPEG_QUANT_TABLE_SIZE] = +{ + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63 +}; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup JPEG_Private_Functions_Prototypes + * @{ + */ + +static HAL_StatusTypeDef JPEG_Bits_To_SizeCodes(const uint8_t *Bits, uint8_t *Huffsize, uint32_t *Huffcode, + uint32_t *LastK); +static HAL_StatusTypeDef JPEG_DCHuff_BitsVals_To_SizeCodes(JPEG_DCHuffTableTypeDef *DC_BitsValsTable, + JPEG_DC_HuffCodeTableTypeDef *DC_SizeCodesTable); +static HAL_StatusTypeDef JPEG_ACHuff_BitsVals_To_SizeCodes(JPEG_ACHuffTableTypeDef *AC_BitsValsTable, + JPEG_AC_HuffCodeTableTypeDef *AC_SizeCodesTable); +static HAL_StatusTypeDef JPEG_Set_HuffDC_Mem(const JPEG_HandleTypeDef *hjpeg, JPEG_DCHuffTableTypeDef *HuffTableDC, + const __IO uint32_t *DCTableAddress); +static HAL_StatusTypeDef JPEG_Set_HuffAC_Mem(const JPEG_HandleTypeDef *hjpeg, JPEG_ACHuffTableTypeDef *HuffTableAC, + const __IO uint32_t *ACTableAddress); +static HAL_StatusTypeDef JPEG_Set_HuffEnc_Mem(JPEG_HandleTypeDef *hjpeg); +static void JPEG_Set_Huff_DHTMem(const JPEG_HandleTypeDef *hjpeg); +static uint32_t JPEG_Set_Quantization_Mem(const JPEG_HandleTypeDef *hjpeg, const uint8_t *QTable, + __IO uint32_t *QTableAddress); +static void JPEG_SetColorYCBCR(JPEG_HandleTypeDef *hjpeg); +static void JPEG_SetColorGrayScale(JPEG_HandleTypeDef *hjpeg); +static void JPEG_SetColorCMYK(JPEG_HandleTypeDef *hjpeg); + +static void JPEG_Init_Process(JPEG_HandleTypeDef *hjpeg); +static uint32_t JPEG_Process(JPEG_HandleTypeDef *hjpeg); +static void JPEG_ReadInputData(JPEG_HandleTypeDef *hjpeg, uint32_t nbRequestWords); +static void JPEG_StoreOutputData(JPEG_HandleTypeDef *hjpeg, uint32_t nbOutputWords); +static uint32_t JPEG_GetQuality(const JPEG_HandleTypeDef *hjpeg); + +static HAL_StatusTypeDef JPEG_DMA_StartProcess(JPEG_HandleTypeDef *hjpeg); +static void JPEG_DMA_ContinueProcess(JPEG_HandleTypeDef *hjpeg); +static void JPEG_DMA_EndProcess(JPEG_HandleTypeDef *hjpeg); +static void JPEG_DMA_PollResidualData(JPEG_HandleTypeDef *hjpeg); +static void JPEG_DMAOutCpltCallback(DMA_HandleTypeDef *hdma); +static void JPEG_DMAInCpltCallback(DMA_HandleTypeDef *hdma); +static void JPEG_DMAErrorCallback(DMA_HandleTypeDef *hdma); +static void JPEG_DMAOutAbortCallback(DMA_HandleTypeDef *hdma) ; + +/** + * @} + */ + +/** @defgroup JPEG_Exported_Functions JPEG Exported Functions + * @{ + */ + +/** @defgroup JPEG_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the JPEG peripheral and creates the associated handle + (+) DeInitialize the JPEG peripheral + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the JPEG according to the specified + * parameters in the JPEG_InitTypeDef and creates the associated handle. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Init(JPEG_HandleTypeDef *hjpeg) +{ + /* These are the sample quantization tables given in JPEG spec ISO/IEC 10918-1 standard , section K.1. */ + static const uint8_t JPEG_LUM_QuantTable[JPEG_QUANT_TABLE_SIZE] = + { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 + }; + static const uint8_t JPEG_CHROM_QuantTable[JPEG_QUANT_TABLE_SIZE] = + { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 + }; + + /* Check the JPEG handle allocation */ + if (hjpeg == NULL) + { + return HAL_ERROR; + } + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + if (hjpeg->State == HAL_JPEG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hjpeg->Lock = HAL_UNLOCKED; + + hjpeg->InfoReadyCallback = HAL_JPEG_InfoReadyCallback; /* Legacy weak InfoReadyCallback */ + hjpeg->EncodeCpltCallback = HAL_JPEG_EncodeCpltCallback; /* Legacy weak EncodeCpltCallback */ + hjpeg->DecodeCpltCallback = HAL_JPEG_DecodeCpltCallback; /* Legacy weak DecodeCpltCallback */ + hjpeg->ErrorCallback = HAL_JPEG_ErrorCallback; /* Legacy weak ErrorCallback */ + hjpeg->GetDataCallback = HAL_JPEG_GetDataCallback; /* Legacy weak GetDataCallback */ + hjpeg->DataReadyCallback = HAL_JPEG_DataReadyCallback; /* Legacy weak DataReadyCallback */ + + if (hjpeg->MspInitCallback == NULL) + { + hjpeg->MspInitCallback = HAL_JPEG_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hjpeg->MspInitCallback(hjpeg); + } +#else + if (hjpeg->State == HAL_JPEG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hjpeg->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK */ + HAL_JPEG_MspInit(hjpeg); + } +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_BUSY; + + /* Start the JPEG Core*/ + __HAL_JPEG_ENABLE(hjpeg); + + /* Stop the JPEG encoding/decoding process*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + /* Disable All Interrupts */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + /* Disable All DMA requests */ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_MASK); + + /* Flush input and output FIFOs*/ + hjpeg->Instance->CR |= JPEG_CR_IFF; + hjpeg->Instance->CR |= JPEG_CR_OFF; + + /* Clear all flags */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_ALL); + + /* init default quantization tables*/ + hjpeg->QuantTable0 = (uint8_t *)((uint32_t)JPEG_LUM_QuantTable); + hjpeg->QuantTable1 = (uint8_t *)((uint32_t)JPEG_CHROM_QuantTable); + hjpeg->QuantTable2 = NULL; + hjpeg->QuantTable3 = NULL; + + /* init the default Huffman tables*/ + if (JPEG_Set_HuffEnc_Mem(hjpeg) != HAL_OK) + { + hjpeg->ErrorCode = HAL_JPEG_ERROR_HUFF_TABLE; + + return HAL_ERROR; + } + + /* Enable header processing*/ + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_HDR; + + /* Reset JpegInCount and JpegOutCount */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /* Reset the JPEG ErrorCode */ + hjpeg->ErrorCode = HAL_JPEG_ERROR_NONE; + + /* Clear the context fields */ + hjpeg->Context = 0; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the JPEG peripheral. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_DeInit(JPEG_HandleTypeDef *hjpeg) +{ + /* Check the JPEG handle allocation */ + if (hjpeg == NULL) + { + return HAL_ERROR; + } + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + if (hjpeg->MspDeInitCallback == NULL) + { + hjpeg->MspDeInitCallback = HAL_JPEG_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hjpeg->MspDeInitCallback(hjpeg); + +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_JPEG_MspDeInit(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_BUSY; + + /* Reset the JPEG ErrorCode */ + hjpeg->ErrorCode = HAL_JPEG_ERROR_NONE; + + /* Reset JpegInCount and JpegOutCount */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_RESET; + + /*Clear the context fields*/ + hjpeg->Context = 0; + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the JPEG MSP. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +__weak void HAL_JPEG_MspInit(JPEG_HandleTypeDef *hjpeg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes JPEG MSP. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +__weak void HAL_JPEG_MspDeInit(JPEG_HandleTypeDef *hjpeg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User JPEG Callback + * To be used to override the weak predefined callback + * @param hjpeg JPEG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_JPEG_ENCODE_CPLT_CB_ID Encode Complete callback ID + * @arg @ref HAL_JPEG_DECODE_CPLT_CB_ID Decode Complete callback ID + * @arg @ref HAL_JPEG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_JPEG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_JPEG_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_RegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID, + pJPEG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + switch (CallbackID) + { + case HAL_JPEG_ENCODE_CPLT_CB_ID : + hjpeg->EncodeCpltCallback = pCallback; + break; + + case HAL_JPEG_DECODE_CPLT_CB_ID : + hjpeg->DecodeCpltCallback = pCallback; + break; + + case HAL_JPEG_ERROR_CB_ID : + hjpeg->ErrorCallback = pCallback; + break; + + case HAL_JPEG_MSPINIT_CB_ID : + hjpeg->MspInitCallback = pCallback; + break; + + case HAL_JPEG_MSPDEINIT_CB_ID : + hjpeg->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_JPEG_STATE_RESET == hjpeg->State) + { + switch (CallbackID) + { + case HAL_JPEG_MSPINIT_CB_ID : + hjpeg->MspInitCallback = pCallback; + break; + + case HAL_JPEG_MSPDEINIT_CB_ID : + hjpeg->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief Unregister a JPEG Callback + * JPEG callback is redirected to the weak predefined callback + * @param hjpeg JPEG handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_JPEG_ENCODE_CPLT_CB_ID Encode Complete callback ID + * @arg @ref HAL_JPEG_DECODE_CPLT_CB_ID Decode Complete callback ID + * @arg @ref HAL_JPEG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_JPEG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_JPEG_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_UnRegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + switch (CallbackID) + { + case HAL_JPEG_ENCODE_CPLT_CB_ID : + hjpeg->EncodeCpltCallback = HAL_JPEG_EncodeCpltCallback; /* Legacy weak EncodeCpltCallback */ + break; + + case HAL_JPEG_DECODE_CPLT_CB_ID : + hjpeg->DecodeCpltCallback = HAL_JPEG_DecodeCpltCallback; /* Legacy weak DecodeCpltCallback */ + break; + + case HAL_JPEG_ERROR_CB_ID : + hjpeg->ErrorCallback = HAL_JPEG_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_JPEG_MSPINIT_CB_ID : + hjpeg->MspInitCallback = HAL_JPEG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_JPEG_MSPDEINIT_CB_ID : + hjpeg->MspDeInitCallback = HAL_JPEG_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_JPEG_STATE_RESET == hjpeg->State) + { + switch (CallbackID) + { + case HAL_JPEG_MSPINIT_CB_ID : + hjpeg->MspInitCallback = HAL_JPEG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_JPEG_MSPDEINIT_CB_ID : + hjpeg->MspDeInitCallback = HAL_JPEG_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief Register Info Ready JPEG Callback + * To be used instead of the weak HAL_JPEG_InfoReadyCallback() predefined callback + * @param hjpeg JPEG handle + * @param pCallback pointer to the Info Ready Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_RegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg, + pJPEG_InfoReadyCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->InfoReadyCallback = pCallback; + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief UnRegister the Info Ready JPEG Callback + * Info Ready JPEG Callback is redirected to the weak HAL_JPEG_InfoReadyCallback() predefined callback + * @param hjpeg JPEG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_UnRegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->InfoReadyCallback = HAL_JPEG_InfoReadyCallback; /* Legacy weak InfoReadyCallback */ + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief Register Get Data JPEG Callback + * To be used instead of the weak HAL_JPEG_GetDataCallback() predefined callback + * @param hjpeg JPEG handle + * @param pCallback pointer to the Get Data Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_RegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg, pJPEG_GetDataCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->GetDataCallback = pCallback; + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief UnRegister the Get Data JPEG Callback + * Get Data JPEG Callback is redirected to the weak HAL_JPEG_GetDataCallback() predefined callback + * @param hjpeg JPEG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_UnRegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->GetDataCallback = HAL_JPEG_GetDataCallback; /* Legacy weak GetDataCallback */ + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief Register Data Ready JPEG Callback + * To be used instead of the weak HAL_JPEG_DataReadyCallback() predefined callback + * @param hjpeg JPEG handle + * @param pCallback pointer to the Get Data Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_RegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg, + pJPEG_DataReadyCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->DataReadyCallback = pCallback; + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +/** + * @brief UnRegister the Data Ready JPEG Callback + * Get Data Ready Callback is redirected to the weak HAL_JPEG_DataReadyCallback() predefined callback + * @param hjpeg JPEG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_UnRegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (HAL_JPEG_STATE_READY == hjpeg->State) + { + hjpeg->DataReadyCallback = HAL_JPEG_DataReadyCallback; /* Legacy weak DataReadyCallback */ + } + else + { + /* Update the error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hjpeg); + return status; +} + +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup JPEG_Exported_Functions_Group2 Configuration functions + * @brief JPEG Configuration functions. + * +@verbatim + ============================================================================== + ##### Configuration functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_JPEG_ConfigEncoding() : JPEG encoding configuration + (+) HAL_JPEG_GetInfo() : Extract the image configuration from the JPEG header during the decoding + (+) HAL_JPEG_EnableHeaderParsing() : Enable JPEG Header parsing for decoding + (+) HAL_JPEG_DisableHeaderParsing() : Disable JPEG Header parsing for decoding + (+) HAL_JPEG_SetUserQuantTables : Modify the default Quantization tables used for JPEG encoding. + +@endverbatim + * @{ + */ + +/** + * @brief Set the JPEG encoding configuration. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pConf pointer to a JPEG_ConfTypeDef structure that contains + * the encoding configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_ConfigEncoding(JPEG_HandleTypeDef *hjpeg, const JPEG_ConfTypeDef *pConf) +{ + uint32_t error; + uint32_t numberMCU; + uint32_t hfactor; + uint32_t vfactor; + uint32_t hMCU; + uint32_t vMCU; + + /* Check the JPEG handle allocation */ + if ((hjpeg == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_JPEG_COLORSPACE(pConf->ColorSpace)); + assert_param(IS_JPEG_CHROMASUBSAMPLING(pConf->ChromaSubsampling)); + assert_param(IS_JPEG_IMAGE_QUALITY(pConf->ImageQuality)); + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + hjpeg->State = HAL_JPEG_STATE_BUSY; + + hjpeg->Conf.ColorSpace = pConf->ColorSpace; + hjpeg->Conf.ChromaSubsampling = pConf->ChromaSubsampling; + hjpeg->Conf.ImageHeight = pConf->ImageHeight; + hjpeg->Conf.ImageWidth = pConf->ImageWidth; + hjpeg->Conf.ImageQuality = pConf->ImageQuality; + + /* Reset the Color Space : by default only one quantization table is used*/ + hjpeg->Instance->CONFR1 &= ~JPEG_CONFR1_COLORSPACE; + + /* Set Number of color components*/ + if (hjpeg->Conf.ColorSpace == JPEG_GRAYSCALE_COLORSPACE) + { + /*Gray Scale is only one component 8x8 blocks i.e 4:4:4*/ + hjpeg->Conf.ChromaSubsampling = JPEG_444_SUBSAMPLING; + + JPEG_SetColorGrayScale(hjpeg); + /* Set quantization table 0*/ + error = JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable0, (hjpeg->Instance->QMEM0)); + } + else if (hjpeg->Conf.ColorSpace == JPEG_YCBCR_COLORSPACE) + { + /* + Set the Color Space for YCbCr : 2 quantization tables are used + one for Luminance(Y) and one for both Chrominances (Cb & Cr) + */ + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_COLORSPACE_0; + + JPEG_SetColorYCBCR(hjpeg); + + /* Set quantization table 0*/ + error = JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable0, (hjpeg->Instance->QMEM0)); + /*By default quantization table 0 for component 0 and quantization table 1 for both components 1 and 2*/ + (void) JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable1, (hjpeg->Instance->QMEM1)); + + if ((hjpeg->Context & JPEG_CONTEXT_CUSTOM_TABLES) != 0UL) + { + /*Use user customized quantization tables , 1 table per component*/ + /* use 3 quantization tables , one for each component*/ + hjpeg->Instance->CONFR1 &= (~JPEG_CONFR1_COLORSPACE); + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_COLORSPACE_1; + + (void) JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable2, (hjpeg->Instance->QMEM2)); + + /*Use Quantization 1 table for component 1*/ + hjpeg->Instance->CONFR5 &= (~JPEG_CONFR5_QT); + hjpeg->Instance->CONFR5 |= JPEG_CONFR5_QT_0; + + /*Use Quantization 2 table for component 2*/ + hjpeg->Instance->CONFR6 &= (~JPEG_CONFR6_QT); + hjpeg->Instance->CONFR6 |= JPEG_CONFR6_QT_1; + } + } + else /* ColorSpace == JPEG_CMYK_COLORSPACE */ + { + JPEG_SetColorCMYK(hjpeg); + + /* Set quantization table 0*/ + error = JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable0, (hjpeg->Instance->QMEM0)); + /*By default quantization table 0 for All components*/ + + if ((hjpeg->Context & JPEG_CONTEXT_CUSTOM_TABLES) != 0UL) + { + /*Use user customized quantization tables , 1 table per component*/ + /* use 4 quantization tables , one for each component*/ + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_COLORSPACE; + + (void) JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable1, (hjpeg->Instance->QMEM1)); + (void) JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable2, (hjpeg->Instance->QMEM2)); + (void) JPEG_Set_Quantization_Mem(hjpeg, hjpeg->QuantTable3, (hjpeg->Instance->QMEM3)); + + /*Use Quantization 1 table for component 1*/ + hjpeg->Instance->CONFR5 |= JPEG_CONFR5_QT_0; + + /*Use Quantization 2 table for component 2*/ + hjpeg->Instance->CONFR6 |= JPEG_CONFR6_QT_1; + + /*Use Quantization 3 table for component 3*/ + hjpeg->Instance->CONFR7 |= JPEG_CONFR7_QT; + } + } + + if (error != 0UL) + { + hjpeg->ErrorCode = HAL_JPEG_ERROR_QUANT_TABLE; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Set the JPEG State to ready */ + hjpeg->State = HAL_JPEG_STATE_READY; + + return HAL_ERROR; + } + /* Set the image size*/ + /* set the number of lines*/ + MODIFY_REG(hjpeg->Instance->CONFR1, JPEG_CONFR1_YSIZE, ((hjpeg->Conf.ImageHeight & 0x0000FFFFUL) << 16)); + /* set the number of pixels per line*/ + MODIFY_REG(hjpeg->Instance->CONFR3, JPEG_CONFR3_XSIZE, ((hjpeg->Conf.ImageWidth & 0x0000FFFFUL) << 16)); + + + if (hjpeg->Conf.ChromaSubsampling == JPEG_420_SUBSAMPLING) /* 4:2:0*/ + { + hfactor = 16; + vfactor = 16; + } + else if (hjpeg->Conf.ChromaSubsampling == JPEG_422_SUBSAMPLING) /* 4:2:2*/ + { + hfactor = 16; + vfactor = 8; + } + else /* Default is 8x8 MCU, 4:4:4*/ + { + hfactor = 8; + vfactor = 8; + } + + hMCU = (hjpeg->Conf.ImageWidth / hfactor); + if ((hjpeg->Conf.ImageWidth % hfactor) != 0UL) + { + hMCU++; /*+1 for horizontal incomplete MCU */ + } + + vMCU = (hjpeg->Conf.ImageHeight / vfactor); + if ((hjpeg->Conf.ImageHeight % vfactor) != 0UL) + { + vMCU++; /*+1 for vertical incomplete MCU */ + } + + numberMCU = (hMCU * vMCU) - 1UL; /* Bit Field JPEG_CONFR2_NMCU shall be set to NB_MCU - 1*/ + /* Set the number of MCU*/ + hjpeg->Instance->CONFR2 = (numberMCU & JPEG_CONFR2_NMCU); + + hjpeg->Context |= JPEG_CONTEXT_CONF_ENCODING; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Set the JPEG State to ready */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Return function status */ + return HAL_BUSY; + } + } +} + +/** + * @brief Extract the image configuration from the JPEG header during the decoding + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pInfo pointer to a JPEG_ConfTypeDef structure that contains + * The JPEG decoded header information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_GetInfo(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo) +{ + uint32_t yblockNb; + uint32_t cBblockNb; + uint32_t cRblockNb; + + /* Check the JPEG handle allocation */ + if ((hjpeg == NULL) || (pInfo == NULL)) + { + return HAL_ERROR; + } + + /*Read the conf parameters */ + if ((hjpeg->Instance->CONFR1 & JPEG_CONFR1_NF) == JPEG_CONFR1_NF_1) + { + pInfo->ColorSpace = JPEG_YCBCR_COLORSPACE; + } + else if ((hjpeg->Instance->CONFR1 & JPEG_CONFR1_NF) == 0UL) + { + pInfo->ColorSpace = JPEG_GRAYSCALE_COLORSPACE; + } + else if ((hjpeg->Instance->CONFR1 & JPEG_CONFR1_NF) == JPEG_CONFR1_NF) + { + pInfo->ColorSpace = JPEG_CMYK_COLORSPACE; + } + else + { + return HAL_ERROR; + } + + pInfo->ImageHeight = (hjpeg->Instance->CONFR1 & 0xFFFF0000UL) >> 16; + pInfo->ImageWidth = (hjpeg->Instance->CONFR3 & 0xFFFF0000UL) >> 16; + + if ((pInfo->ColorSpace == JPEG_YCBCR_COLORSPACE) || (pInfo->ColorSpace == JPEG_CMYK_COLORSPACE)) + { + yblockNb = (hjpeg->Instance->CONFR4 & JPEG_CONFR4_NB) >> 4; + cBblockNb = (hjpeg->Instance->CONFR5 & JPEG_CONFR5_NB) >> 4; + cRblockNb = (hjpeg->Instance->CONFR6 & JPEG_CONFR6_NB) >> 4; + + if ((yblockNb == 1UL) && (cBblockNb == 0UL) && (cRblockNb == 0UL)) + { + pInfo->ChromaSubsampling = JPEG_422_SUBSAMPLING; /*16x8 block*/ + } + else if ((yblockNb == 0UL) && (cBblockNb == 0UL) && (cRblockNb == 0UL)) + { + pInfo->ChromaSubsampling = JPEG_444_SUBSAMPLING; + } + else if ((yblockNb == 3UL) && (cBblockNb == 0UL) && (cRblockNb == 0UL)) + { + pInfo->ChromaSubsampling = JPEG_420_SUBSAMPLING; + } + else /*Default is 4:4:4*/ + { + pInfo->ChromaSubsampling = JPEG_444_SUBSAMPLING; + } + } + else + { + pInfo->ChromaSubsampling = JPEG_444_SUBSAMPLING; + } + + pInfo->ImageQuality = JPEG_GetQuality(hjpeg); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable JPEG Header parsing for decoding + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for the JPEG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_EnableHeaderParsing(JPEG_HandleTypeDef *hjpeg) +{ + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_BUSY; + + /* Enable header processing*/ + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_HDR; + + /* Process unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + return HAL_OK; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } +} + +/** + * @brief Disable JPEG Header parsing for decoding + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for the JPEG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_DisableHeaderParsing(JPEG_HandleTypeDef *hjpeg) +{ + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_BUSY; + + /* Disable header processing*/ + hjpeg->Instance->CONFR1 &= ~JPEG_CONFR1_HDR; + + /* Process unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + return HAL_OK; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } +} + +/** + * @brief Modify the default Quantization tables used for JPEG encoding. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param QTable0 pointer to uint8_t , define the user quantification table for color component 1. + * If NULL assume no need to update the table and no error return + * @param QTable1 pointer to uint8_t , define the user quantification table for color component 2. + * If NULL assume no need to update the table and no error return. + * @param QTable2 pointer to uint8_t , define the user quantification table for color component 3, + * If NULL assume no need to update the table and no error return. + * @param QTable3 pointer to uint8_t , define the user quantification table for color component 4. + * If NULL assume no need to update the table and no error return. + * + * @retval HAL status + */ + + +HAL_StatusTypeDef HAL_JPEG_SetUserQuantTables(JPEG_HandleTypeDef *hjpeg, uint8_t *QTable0, uint8_t *QTable1, + uint8_t *QTable2, uint8_t *QTable3) +{ + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /* Change the DMA state */ + hjpeg->State = HAL_JPEG_STATE_BUSY; + + hjpeg->Context |= JPEG_CONTEXT_CUSTOM_TABLES; + + hjpeg->QuantTable0 = QTable0; + hjpeg->QuantTable1 = QTable1; + hjpeg->QuantTable2 = QTable2; + hjpeg->QuantTable3 = QTable3; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the DMA state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** @defgroup JPEG_Exported_Functions_Group3 encoding/decoding processing functions + * @brief processing functions. + * +@verbatim + ============================================================================== + ##### JPEG processing functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) HAL_JPEG_Encode() : JPEG encoding with polling process + (+) HAL_JPEG_Decode() : JPEG decoding with polling process + (+) HAL_JPEG_Encode_IT() : JPEG encoding with interrupt process + (+) HAL_JPEG_Decode_IT() : JPEG decoding with interrupt process + (+) HAL_JPEG_Encode_DMA() : JPEG encoding with DMA process + (+) HAL_JPEG_Decode_DMA() : JPEG decoding with DMA process + (+) HAL_JPEG_Pause() : Pause the Input/Output processing + (+) HAL_JPEG_Resume() : Resume the JPEG Input/Output processing + (+) HAL_JPEG_ConfigInputBuffer() : Config Encoding/Decoding Input Buffer + (+) HAL_JPEG_ConfigOutputBuffer() : Config Encoding/Decoding Output Buffer + (+) HAL_JPEG_Abort() : Aborts the JPEG Encoding/Decoding + +@endverbatim + * @{ + */ + +/** + * @brief Starts JPEG encoding with polling processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataInMCU Pointer to the Input buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOut Pointer to the jpeg output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Encode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataInMCU == NULL) || (pDataOut == NULL)) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State != HAL_JPEG_STATE_READY) + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + if ((hjpeg->Context & JPEG_CONTEXT_CONF_ENCODING) == JPEG_CONTEXT_CONF_ENCODING) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_ENCODING; + + /*Set the Context to Encode with Polling*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_ENCODE | JPEG_CONTEXT_POLLING); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataInMCU; + hjpeg->pJpegOutBuffPtr = pDataOut; + hjpeg->InDataLength = InDataLength - (InDataLength % 4UL); /* In Data length must be multiple + of 4 Bytes (1 word)*/ + hjpeg->OutDataLength = OutDataLength - (OutDataLength % 4UL); /* Out Data length must be multiple + of 4 Bytes (1 word)*/ + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + /*JPEG data processing : In/Out FIFO transfer*/ + while ((JPEG_Process(hjpeg) == JPEG_PROCESS_ONGOING)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + + /* Update error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_READY; + + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts JPEG decoding with polling processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataIn Pointer to the input data buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOutMCU Pointer to the Output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Decode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataIn == NULL) || (pDataOutMCU == NULL)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + /* Get tick */ + tickstart = HAL_GetTick(); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_DECODING; + + /*Set the Context to Decode with Polling*/ + /*Set the Context to Encode with Polling*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_DECODE | JPEG_CONTEXT_POLLING); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataIn; + hjpeg->pJpegOutBuffPtr = pDataOutMCU; + hjpeg->InDataLength = InDataLength - (InDataLength % 4UL); /*In Data length must be multiple + of 4 Bytes (1 word)*/ + hjpeg->OutDataLength = OutDataLength - (OutDataLength % 4UL); /*Out Data length must be multiple + of 4 Bytes (1 word)*/ + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + /*JPEG data processing : In/Out FIFO transfer*/ + while ((JPEG_Process(hjpeg) == JPEG_PROCESS_ONGOING)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + + /* Update error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_READY; + + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts JPEG encoding with interrupt processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataInMCU Pointer to the Input buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOut Pointer to the jpeg output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Encode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength) +{ + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataInMCU == NULL) || (pDataOut == NULL)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State != HAL_JPEG_STATE_READY) + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + else + { + if ((hjpeg->Context & JPEG_CONTEXT_CONF_ENCODING) == JPEG_CONTEXT_CONF_ENCODING) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_ENCODING; + + /*Set the Context to Encode with IT*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_ENCODE | JPEG_CONTEXT_IT); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataInMCU; + hjpeg->pJpegOutBuffPtr = pDataOut; + hjpeg->InDataLength = InDataLength - (InDataLength % 4UL); /*In Data length must be multiple + of 4 Bytes (1 word)*/ + hjpeg->OutDataLength = OutDataLength - (OutDataLength % 4UL); /*Out Data length must be multiple + of 4 Bytes (1 word)*/ + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts JPEG decoding with interrupt processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataIn Pointer to the input data buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOutMCU Pointer to the Output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Decode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength) +{ + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataIn == NULL) || (pDataOutMCU == NULL)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_DECODING; + + /*Set the Context to Decode with IT*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_DECODE | JPEG_CONTEXT_IT); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataIn; + hjpeg->pJpegOutBuffPtr = pDataOutMCU; + hjpeg->InDataLength = InDataLength - (InDataLength % 4UL); /*In Data length must be multiple + of 4 Bytes (1 word)*/ + hjpeg->OutDataLength = OutDataLength - (OutDataLength % 4UL); /*Out Data length must be multiple + of 4 Bytes (1 word)*/ + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts JPEG encoding with DMA processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataInMCU Pointer to the Input buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOut Pointer to the jpeg output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Encode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength, + uint8_t *pDataOut, uint32_t OutDataLength) +{ + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataInMCU == NULL) || (pDataOut == NULL)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State != HAL_JPEG_STATE_READY) + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + else + { + if ((hjpeg->Context & JPEG_CONTEXT_CONF_ENCODING) == JPEG_CONTEXT_CONF_ENCODING) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_ENCODING; + + /*Set the Context to Encode with DMA*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_ENCODE | JPEG_CONTEXT_DMA); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataInMCU; + hjpeg->pJpegOutBuffPtr = pDataOut; + hjpeg->InDataLength = InDataLength; + hjpeg->OutDataLength = OutDataLength; + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + /* JPEG encoding process using DMA */ + if (JPEG_DMA_StartProcess(hjpeg) != HAL_OK) + { + /* Update State */ + hjpeg->State = HAL_JPEG_STATE_ERROR; + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts JPEG decoding with DMA processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataIn Pointer to the input data buffer + * @param InDataLength size in bytes Input buffer + * @param pDataOutMCU Pointer to the Output data buffer + * @param OutDataLength size in bytes of the Output buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Decode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength, + uint8_t *pDataOutMCU, uint32_t OutDataLength) +{ + /* Check the parameters */ + assert_param((InDataLength >= 4UL)); + assert_param((OutDataLength >= 4UL)); + + /* Check In/out buffer allocation and size */ + if ((hjpeg == NULL) || (pDataIn == NULL) || (pDataOutMCU == NULL)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hjpeg); + + if (hjpeg->State == HAL_JPEG_STATE_READY) + { + /*Change JPEG state*/ + hjpeg->State = HAL_JPEG_STATE_BUSY_DECODING; + + /*Set the Context to Decode with DMA*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK); + hjpeg->Context |= (JPEG_CONTEXT_DECODE | JPEG_CONTEXT_DMA); + + /*Store In/out buffers pointers and size*/ + hjpeg->pJpegInBuffPtr = pDataIn; + hjpeg->pJpegOutBuffPtr = pDataOutMCU; + hjpeg->InDataLength = InDataLength; + hjpeg->OutDataLength = OutDataLength; + + /*Reset In/out data counter */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Init decoding process*/ + JPEG_Init_Process(hjpeg); + + /* JPEG decoding process using DMA */ + if (JPEG_DMA_StartProcess(hjpeg) != HAL_OK) + { + /* Update State */ + hjpeg->State = HAL_JPEG_STATE_ERROR; + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_BUSY; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Pause the JPEG Input/Output processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param XferSelection This parameter can be one of the following values : + * JPEG_PAUSE_RESUME_INPUT : Pause Input processing + * JPEG_PAUSE_RESUME_OUTPUT: Pause Output processing + * JPEG_PAUSE_RESUME_INPUT_OUTPUT: Pause Input and Output processing + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Pause(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection) +{ + uint32_t mask = 0; + + assert_param(IS_JPEG_PAUSE_RESUME_STATE(XferSelection)); + + if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_DMA) + { + if ((XferSelection & JPEG_PAUSE_RESUME_INPUT) == JPEG_PAUSE_RESUME_INPUT) + { + hjpeg->Context |= JPEG_CONTEXT_PAUSE_INPUT; + mask |= JPEG_DMA_IDMA; + } + if ((XferSelection & JPEG_PAUSE_RESUME_OUTPUT) == JPEG_PAUSE_RESUME_OUTPUT) + { + hjpeg->Context |= JPEG_CONTEXT_PAUSE_OUTPUT; + mask |= JPEG_DMA_ODMA; + } + JPEG_DISABLE_DMA(hjpeg, mask); + + } + else if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_IT) + { + + if ((XferSelection & JPEG_PAUSE_RESUME_INPUT) == JPEG_PAUSE_RESUME_INPUT) + { + hjpeg->Context |= JPEG_CONTEXT_PAUSE_INPUT; + mask |= (JPEG_IT_IFT | JPEG_IT_IFNF); + } + if ((XferSelection & JPEG_PAUSE_RESUME_OUTPUT) == JPEG_PAUSE_RESUME_OUTPUT) + { + hjpeg->Context |= JPEG_CONTEXT_PAUSE_OUTPUT; + mask |= (JPEG_IT_OFT | JPEG_IT_OFNE | JPEG_IT_EOC); + } + __HAL_JPEG_DISABLE_IT(hjpeg, mask); + + } + else + { + /* Nothing to do */ + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Resume the JPEG Input/Output processing + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param XferSelection This parameter can be one of the following values : + * JPEG_PAUSE_RESUME_INPUT : Resume Input processing + * JPEG_PAUSE_RESUME_OUTPUT: Resume Output processing + * JPEG_PAUSE_RESUME_INPUT_OUTPUT: Resume Input and Output processing + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Resume(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection) +{ + uint32_t mask = 0; + + assert_param(IS_JPEG_PAUSE_RESUME_STATE(XferSelection)); + + if ((hjpeg->Context & (JPEG_CONTEXT_PAUSE_INPUT | JPEG_CONTEXT_PAUSE_OUTPUT)) == 0UL) + { + /* if nothing paused to resume return error*/ + return HAL_ERROR; + } + + if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_DMA) + { + + if ((XferSelection & JPEG_PAUSE_RESUME_INPUT) == JPEG_PAUSE_RESUME_INPUT) + { + hjpeg->Context &= (~JPEG_CONTEXT_PAUSE_INPUT); + mask |= JPEG_DMA_IDMA; + + /*JPEG Input DMA transfer data number must be multiple of DMA buffer size + as the destination is a 32 bits register */ + hjpeg->InDataLength = hjpeg->InDataLength - (hjpeg->InDataLength % 4UL); + + if (hjpeg->InDataLength > 0UL) + { + /* Start DMA FIFO In transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmain, (uint32_t)hjpeg->pJpegInBuffPtr, (uint32_t)&hjpeg->Instance->DIR, + hjpeg->InDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + hjpeg->State = HAL_JPEG_STATE_ERROR; + return HAL_ERROR; + } + } + } + if ((XferSelection & JPEG_PAUSE_RESUME_OUTPUT) == JPEG_PAUSE_RESUME_OUTPUT) + { + hjpeg->Context &= (~JPEG_CONTEXT_PAUSE_OUTPUT); + + if ((hjpeg->Context & JPEG_CONTEXT_ENDING_DMA) != 0UL) + { + JPEG_DMA_PollResidualData(hjpeg); + } + else + { + mask |= JPEG_DMA_ODMA; + + /* Start DMA FIFO Out transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmaout, (uint32_t)&hjpeg->Instance->DOR, (uint32_t)hjpeg->pJpegOutBuffPtr, + hjpeg->OutDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + hjpeg->State = HAL_JPEG_STATE_ERROR; + return HAL_ERROR; + } + } + + } + JPEG_ENABLE_DMA(hjpeg, mask); + + } + else if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_IT) + { + if ((XferSelection & JPEG_PAUSE_RESUME_INPUT) == JPEG_PAUSE_RESUME_INPUT) + { + hjpeg->Context &= (~JPEG_CONTEXT_PAUSE_INPUT); + mask |= (JPEG_IT_IFT | JPEG_IT_IFNF); + } + if ((XferSelection & JPEG_PAUSE_RESUME_OUTPUT) == JPEG_PAUSE_RESUME_OUTPUT) + { + hjpeg->Context &= (~JPEG_CONTEXT_PAUSE_OUTPUT); + mask |= (JPEG_IT_OFT | JPEG_IT_OFNE | JPEG_IT_EOC); + } + __HAL_JPEG_ENABLE_IT(hjpeg, mask); + + } + else + { + /* Nothing to do */ + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Config Encoding/Decoding Input Buffer. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module. + * @param pNewInputBuffer Pointer to the new input data buffer + * @param InDataLength Size in bytes of the new Input data buffer + * @retval HAL status + */ +void HAL_JPEG_ConfigInputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewInputBuffer, uint32_t InDataLength) +{ + hjpeg->pJpegInBuffPtr = pNewInputBuffer; + hjpeg->InDataLength = InDataLength; +} + +/** + * @brief Config Encoding/Decoding Output Buffer. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module. + * @param pNewOutputBuffer Pointer to the new output data buffer + * @param OutDataLength Size in bytes of the new Output data buffer + * @retval HAL status + */ +void HAL_JPEG_ConfigOutputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewOutputBuffer, uint32_t OutDataLength) +{ + hjpeg->pJpegOutBuffPtr = pNewOutputBuffer; + hjpeg->OutDataLength = OutDataLength; +} + +/** + * @brief Aborts the JPEG Encoding/Decoding. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_JPEG_Abort(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t tickstart; + uint32_t tmpContext; + tmpContext = hjpeg->Context; + + /*Reset the Context operation and method*/ + hjpeg->Context &= ~(JPEG_CONTEXT_OPERATION_MASK | JPEG_CONTEXT_METHOD_MASK | JPEG_CONTEXT_ENDING_DMA); + + if ((tmpContext & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_DMA) + { + /* Stop the DMA In/out Xfer*/ + if (HAL_DMA_Abort(hjpeg->hdmaout) != HAL_OK) + { + if (hjpeg->hdmaout->ErrorCode == HAL_DMA_ERROR_TIMEOUT) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + } + } + if (HAL_DMA_Abort(hjpeg->hdmain) != HAL_OK) + { + if (hjpeg->hdmain->ErrorCode == HAL_DMA_ERROR_TIMEOUT) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + } + } + + } + + /* Stop the JPEG encoding/decoding process*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if the JPEG Codec is effectively disabled */ + while (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_COF) != 0UL) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > JPEG_TIMEOUT_VALUE) + { + /* Update error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_TIMEOUT; + + /* Change the DMA state */ + hjpeg->State = HAL_JPEG_STATE_ERROR; + break; + } + } + + /* Disable All Interrupts */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + /* Disable All DMA requests */ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_MASK); + + /* Flush input and output FIFOs*/ + hjpeg->Instance->CR |= JPEG_CR_IFF; + hjpeg->Instance->CR |= JPEG_CR_OFF; + + /* Clear all flags */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_ALL); + + /* Reset JpegInCount and JpegOutCount */ + hjpeg->JpegInCount = 0; + hjpeg->JpegOutCount = 0; + + /*Reset the Context Pause*/ + hjpeg->Context &= ~(JPEG_CONTEXT_PAUSE_INPUT | JPEG_CONTEXT_PAUSE_OUTPUT); + + /* Change the DMA state*/ + if (hjpeg->ErrorCode != HAL_JPEG_ERROR_NONE) + { + hjpeg->State = HAL_JPEG_STATE_ERROR; + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + /* Return function status */ + return HAL_ERROR; + } + else + { + hjpeg->State = HAL_JPEG_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + /* Return function status */ + return HAL_OK; + } + +} + + +/** + * @} + */ + +/** @defgroup JPEG_Exported_Functions_Group4 JPEG Decode/Encode callback functions + * @brief JPEG process callback functions. + * +@verbatim + ============================================================================== + ##### JPEG Decode and Encode callback functions ##### + ============================================================================== + [..] This section provides callback functions: + (+) HAL_JPEG_InfoReadyCallback() : Decoding JPEG Info ready callback + (+) HAL_JPEG_EncodeCpltCallback() : Encoding complete callback. + (+) HAL_JPEG_DecodeCpltCallback() : Decoding complete callback. + (+) HAL_JPEG_ErrorCallback() : JPEG error callback. + (+) HAL_JPEG_GetDataCallback() : Get New Data chunk callback. + (+) HAL_JPEG_DataReadyCallback() : Decoded/Encoded Data ready callback. + +@endverbatim + * @{ + */ + +/** + * @brief Decoding JPEG Info ready callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pInfo pointer to a JPEG_ConfTypeDef structure that contains + * The JPEG decoded header information + * @retval None + */ +__weak void HAL_JPEG_InfoReadyCallback(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + UNUSED(pInfo); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_HeaderParsingCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Encoding complete callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +__weak void HAL_JPEG_EncodeCpltCallback(JPEG_HandleTypeDef *hjpeg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_EncodeCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Decoding complete callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +__weak void HAL_JPEG_DecodeCpltCallback(JPEG_HandleTypeDef *hjpeg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_EncodeCpltCallback could be implemented in the user file + */ +} + +/** + * @brief JPEG error callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +__weak void HAL_JPEG_ErrorCallback(JPEG_HandleTypeDef *hjpeg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Get New Data chunk callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param NbDecodedData Number of consumed data in the previous chunk in bytes + * @retval None + */ +__weak void HAL_JPEG_GetDataCallback(JPEG_HandleTypeDef *hjpeg, uint32_t NbDecodedData) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + UNUSED(NbDecodedData); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_GetDataCallback could be implemented in the user file + */ +} + +/** + * @brief Decoded/Encoded Data ready callback. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param pDataOut pointer to the output data buffer + * @param OutDataLength number in bytes of data available in the specified output buffer + * @retval None + */ +__weak void HAL_JPEG_DataReadyCallback(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut, uint32_t OutDataLength) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hjpeg); + UNUSED(pDataOut); + UNUSED(OutDataLength); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_JPEG_DataReadyCallback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** @defgroup JPEG_Exported_Functions_Group5 JPEG IRQ handler management + * @brief JPEG IRQ handler. + * +@verbatim + ============================================================================== + ##### JPEG IRQ handler management ##### + ============================================================================== + [..] This section provides JPEG IRQ handler function. + (+) HAL_JPEG_IRQHandler() : handles JPEG interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief This function handles JPEG interrupt request. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +void HAL_JPEG_IRQHandler(JPEG_HandleTypeDef *hjpeg) +{ + switch (hjpeg->State) + { + case HAL_JPEG_STATE_BUSY_ENCODING: + case HAL_JPEG_STATE_BUSY_DECODING: + /* continue JPEG data encoding/Decoding*/ + /* JPEG data processing : In/Out FIFO transfer*/ + if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_IT) + { + (void) JPEG_Process(hjpeg); + } + else if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_DMA) + { + JPEG_DMA_ContinueProcess(hjpeg); + } + else + { + /* Nothing to do */ + } + break; + + default: + break; + } +} + +/** + * @} + */ + +/** @defgroup JPEG_Exported_Functions_Group6 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] This section provides JPEG State and Errors function. + (+) HAL_JPEG_GetState() : permits to get in run-time the JPEG state. + (+) HAL_JPEG_GetError() : Returns the JPEG error code if any. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the JPEG state. + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG state + */ +HAL_JPEG_STATETypeDef HAL_JPEG_GetState(const JPEG_HandleTypeDef *hjpeg) +{ + return hjpeg->State; +} + +/** + * @brief Return the JPEG error code + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for the specified JPEG. + * @retval JPEG Error Code + */ +uint32_t HAL_JPEG_GetError(const JPEG_HandleTypeDef *hjpeg) +{ + return hjpeg->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @addtogroup JPEG_Private_Functions + * @{ + */ + +/** + * @brief Generates Huffman sizes/Codes Table from Bits/vals Table + * @param Bits pointer to bits table + * @param Huffsize pointer to sizes table + * @param Huffcode pointer to codes table + * @param LastK pointer to last Coeff (table dimension) + * @retval HAL status + */ +static HAL_StatusTypeDef JPEG_Bits_To_SizeCodes(const uint8_t *Bits, uint8_t *Huffsize, uint32_t *Huffcode, + uint32_t *LastK) +{ + uint32_t i; + uint32_t j; + uint32_t k; + uint32_t code; + uint32_t si; + + /* Figure C.1: Generation of table of Huffman code sizes */ + j = 0; + for (k = 0; k < 16UL; k++) + { + i = (uint32_t)Bits[k]; + if ((j + i) > 256UL) + { + /* check for table overflow */ + return HAL_ERROR; + } + while (i != 0UL) + { + Huffsize[j] = (uint8_t) k + 1U; + j++; + i--; + } + } + Huffsize[j] = 0; + *LastK = j; + + /* Figure C.2: Generation of table of Huffman codes */ + code = 0; + si = Huffsize[0]; + j = 0; + while (Huffsize[j] != 0U) + { + while (((uint32_t) Huffsize[j]) == si) + { + Huffcode[j] = code; + j++; + code++; + } + /* code must fit in "size" bits (si), no code is allowed to be all ones*/ + if (si > 31UL) + { + return HAL_ERROR; + } + if (((uint32_t) code) >= (((uint32_t) 1) << si)) + { + return HAL_ERROR; + } + code <<= 1; + si++; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Transform a Bits/Vals AC Huffman table to sizes/Codes huffman Table + * that can programmed to the JPEG encoder registers + * @param AC_BitsValsTable pointer to AC huffman bits/vals table + * @param AC_SizeCodesTable pointer to AC huffman Sizes/Codes table + * @retval HAL status + */ +static HAL_StatusTypeDef JPEG_ACHuff_BitsVals_To_SizeCodes(JPEG_ACHuffTableTypeDef *AC_BitsValsTable, + JPEG_AC_HuffCodeTableTypeDef *AC_SizeCodesTable) +{ + HAL_StatusTypeDef error; + uint8_t huffsize[257]; + uint32_t huffcode[257]; + uint32_t k; + uint32_t i; + uint32_t lsb; + uint32_t msb; + uint32_t lastK; + + error = JPEG_Bits_To_SizeCodes(AC_BitsValsTable->Bits, huffsize, huffcode, &lastK); + if (error != HAL_OK) + { + return error; + } + + /* Figure C.3: Ordering procedure for encoding procedure code tables */ + k = 0; + + while (k < lastK) + { + i = AC_BitsValsTable->HuffVal[k]; + if (i == 0UL) + { + i = JPEG_AC_HUFF_TABLE_SIZE - 2UL; /*i = 0x00 EOB code*/ + } + else if (i == 0xF0UL) /* i = 0xF0 ZRL code*/ + { + i = JPEG_AC_HUFF_TABLE_SIZE - 1UL; + } + else + { + msb = (i & 0xF0UL) >> 4; + lsb = (i & 0x0FUL); + i = (msb * 10UL) + lsb - 1UL; + } + if (i >= JPEG_AC_HUFF_TABLE_SIZE) + { + return HAL_ERROR; /* Huffman Table overflow error*/ + } + else + { + AC_SizeCodesTable->HuffmanCode[i] = huffcode[k]; + AC_SizeCodesTable->CodeLength[i] = huffsize[k] - 1U; + k++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Transform a Bits/Vals DC Huffman table to sizes/Codes huffman Table + * that can programmed to the JPEG encoder registers + * @param DC_BitsValsTable pointer to DC huffman bits/vals table + * @param DC_SizeCodesTable pointer to DC huffman Sizes/Codes table + * @retval HAL status + */ +static HAL_StatusTypeDef JPEG_DCHuff_BitsVals_To_SizeCodes(JPEG_DCHuffTableTypeDef *DC_BitsValsTable, + JPEG_DC_HuffCodeTableTypeDef *DC_SizeCodesTable) +{ + HAL_StatusTypeDef error; + + uint32_t k; + uint32_t i; + uint32_t lastK; + uint8_t huffsize[257]; + uint32_t huffcode[257]; + error = JPEG_Bits_To_SizeCodes(DC_BitsValsTable->Bits, huffsize, huffcode, &lastK); + if (error != HAL_OK) + { + return error; + } + /* Figure C.3: ordering procedure for encoding procedure code tables */ + k = 0; + + while (k < lastK) + { + i = DC_BitsValsTable->HuffVal[k]; + if (i >= JPEG_DC_HUFF_TABLE_SIZE) + { + return HAL_ERROR; /* Huffman Table overflow error*/ + } + else + { + DC_SizeCodesTable->HuffmanCode[i] = huffcode[k]; + DC_SizeCodesTable->CodeLength[i] = huffsize[k] - 1U; + k++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the JPEG register with an DC huffman table at the given DC table address + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param HuffTableDC pointer to DC huffman table + * @param DCTableAddress Encoder DC huffman table address it could be HUFFENC_DC0 or HUFFENC_DC1. + * @retval HAL status + */ +static HAL_StatusTypeDef JPEG_Set_HuffDC_Mem(const JPEG_HandleTypeDef *hjpeg, JPEG_DCHuffTableTypeDef *HuffTableDC, + const __IO uint32_t *DCTableAddress) +{ + HAL_StatusTypeDef error; + JPEG_DC_HuffCodeTableTypeDef dcSizeCodesTable; + uint32_t i; + uint32_t lsb; + uint32_t msb; + __IO uint32_t *address; + __IO uint32_t *addressDef; + + if (DCTableAddress == (hjpeg->Instance->HUFFENC_DC0)) + { + address = (hjpeg->Instance->HUFFENC_DC0 + (JPEG_DC_HUFF_TABLE_SIZE / 2UL)); + } + else if (DCTableAddress == (hjpeg->Instance->HUFFENC_DC1)) + { + address = (hjpeg->Instance->HUFFENC_DC1 + (JPEG_DC_HUFF_TABLE_SIZE / 2UL)); + } + else + { + return HAL_ERROR; + } + + if (HuffTableDC != NULL) + { + error = JPEG_DCHuff_BitsVals_To_SizeCodes(HuffTableDC, &dcSizeCodesTable); + if (error != HAL_OK) + { + return error; + } + addressDef = address; + *addressDef = 0x0FFF0FFF; + addressDef++; + *addressDef = 0x0FFF0FFF; + + i = JPEG_DC_HUFF_TABLE_SIZE; + while (i > 1UL) + { + i--; + address --; + msb = ((uint32_t)(((uint32_t)dcSizeCodesTable.CodeLength[i] & 0xFU) << 8)) | + ((uint32_t)dcSizeCodesTable.HuffmanCode[i] & 0xFFUL); + i--; + lsb = ((uint32_t)(((uint32_t)dcSizeCodesTable.CodeLength[i] & 0xFU) << 8)) | + ((uint32_t)dcSizeCodesTable.HuffmanCode[i] & 0xFFUL); + + *address = lsb | (msb << 16); + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the JPEG register with an AC huffman table at the given AC table address + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param HuffTableAC pointer to AC huffman table + * @param ACTableAddress Encoder AC huffman table address it could be HUFFENC_AC0 or HUFFENC_AC1. + * @retval HAL status + */ +static HAL_StatusTypeDef JPEG_Set_HuffAC_Mem(const JPEG_HandleTypeDef *hjpeg, JPEG_ACHuffTableTypeDef *HuffTableAC, + const __IO uint32_t *ACTableAddress) +{ + HAL_StatusTypeDef error; + JPEG_AC_HuffCodeTableTypeDef acSizeCodesTable; + uint32_t i; + uint32_t lsb; + uint32_t msb; + __IO uint32_t *address; + __IO uint32_t *addressDef; + + if (ACTableAddress == (hjpeg->Instance->HUFFENC_AC0)) + { + address = (hjpeg->Instance->HUFFENC_AC0 + (JPEG_AC_HUFF_TABLE_SIZE / 2UL)); + } + else if (ACTableAddress == (hjpeg->Instance->HUFFENC_AC1)) + { + address = (hjpeg->Instance->HUFFENC_AC1 + (JPEG_AC_HUFF_TABLE_SIZE / 2UL)); + } + else + { + return HAL_ERROR; + } + + if (HuffTableAC != NULL) + { + error = JPEG_ACHuff_BitsVals_To_SizeCodes(HuffTableAC, &acSizeCodesTable); + if (error != HAL_OK) + { + return error; + } + /* Default values settings: 162:167 FFFh , 168:175 FD0h_FD7h */ + /* Locations 162:175 of each AC table contain information used internally by the core */ + + addressDef = address; + for (i = 0; i < 3UL; i++) + { + *addressDef = 0x0FFF0FFF; + addressDef++; + } + *addressDef = 0x0FD10FD0; + addressDef++; + *addressDef = 0x0FD30FD2; + addressDef++; + *addressDef = 0x0FD50FD4; + addressDef++; + *addressDef = 0x0FD70FD6; + /* end of Locations 162:175 */ + + + i = JPEG_AC_HUFF_TABLE_SIZE; + while (i > 1UL) + { + i--; + address--; + msb = ((uint32_t)(((uint32_t)acSizeCodesTable.CodeLength[i] & 0xFU) << 8)) | + ((uint32_t)acSizeCodesTable.HuffmanCode[i] & 0xFFUL); + i--; + lsb = ((uint32_t)(((uint32_t)acSizeCodesTable.CodeLength[i] & 0xFU) << 8)) | + ((uint32_t)acSizeCodesTable.HuffmanCode[i] & 0xFFUL); + + *address = lsb | (msb << 16); + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the JPEG encoder register huffman tables to used during + * the encdoing operation + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static HAL_StatusTypeDef JPEG_Set_HuffEnc_Mem(JPEG_HandleTypeDef *hjpeg) +{ + HAL_StatusTypeDef error; + + JPEG_Set_Huff_DHTMem(hjpeg); + error = JPEG_Set_HuffAC_Mem(hjpeg, (JPEG_ACHuffTableTypeDef *)(uint32_t)&JPEG_ACLUM_HuffTable, + (hjpeg->Instance->HUFFENC_AC0)); + if (error != HAL_OK) + { + return error; + } + + error = JPEG_Set_HuffAC_Mem(hjpeg, (JPEG_ACHuffTableTypeDef *)(uint32_t)&JPEG_ACCHROM_HuffTable, + (hjpeg->Instance->HUFFENC_AC1)); + if (error != HAL_OK) + { + return error; + } + + error = JPEG_Set_HuffDC_Mem(hjpeg, (JPEG_DCHuffTableTypeDef *)(uint32_t)&JPEG_DCLUM_HuffTable, + hjpeg->Instance->HUFFENC_DC0); + if (error != HAL_OK) + { + return error; + } + + error = JPEG_Set_HuffDC_Mem(hjpeg, (JPEG_DCHuffTableTypeDef *)(uint32_t)&JPEG_DCCHROM_HuffTable, + hjpeg->Instance->HUFFENC_DC1); + if (error != HAL_OK) + { + return error; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the JPEG register huffman tables to be included in the JPEG + * file header (used for encoding only) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static void JPEG_Set_Huff_DHTMem(const JPEG_HandleTypeDef *hjpeg) +{ + const JPEG_ACHuffTableTypeDef *HuffTableAC0 = (JPEG_ACHuffTableTypeDef *)(uint32_t)&JPEG_ACLUM_HuffTable; + const JPEG_ACHuffTableTypeDef *HuffTableAC1 = (JPEG_ACHuffTableTypeDef *)(uint32_t)&JPEG_ACCHROM_HuffTable; + const JPEG_DCHuffTableTypeDef *HuffTableDC0 = (JPEG_DCHuffTableTypeDef *)(uint32_t)&JPEG_DCLUM_HuffTable; + const JPEG_DCHuffTableTypeDef *HuffTableDC1 = (JPEG_DCHuffTableTypeDef *)(uint32_t)&JPEG_DCCHROM_HuffTable; + uint32_t value; + uint32_t index; + __IO uint32_t *address; + + /* DC0 Huffman Table : BITS*/ + /* DC0 BITS is a 16 Bytes table i.e 4x32bits words from DHTMEM base address to DHTMEM + 3*/ + address = (hjpeg->Instance->DHTMEM + 3); + index = 16; + while (index > 3UL) + { + + *address = (((uint32_t)HuffTableDC0->Bits[index - 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC0->Bits[index - 2UL] & 0xFFUL) << 16) | + (((uint32_t)HuffTableDC0->Bits[index - 3UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC0->Bits[index - 4UL] & 0xFFUL); + address--; + index -= 4UL; + + } + /* DC0 Huffman Table : Val*/ + /* DC0 VALS is a 12 Bytes table i.e 3x32bits words from DHTMEM base address +4 to DHTMEM + 6 */ + address = (hjpeg->Instance->DHTMEM + 6); + index = 12; + while (index > 3UL) + { + *address = (((uint32_t)HuffTableDC0->HuffVal[index - 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC0->HuffVal[index - 2UL] & 0xFFUL) << 16) | + (((uint32_t)HuffTableDC0->HuffVal[index - 3UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC0->HuffVal[index - 4UL] & 0xFFUL); + address--; + index -= 4UL; + } + + /* AC0 Huffman Table : BITS*/ + /* AC0 BITS is a 16 Bytes table i.e 4x32bits words from DHTMEM base address + 7 to DHTMEM + 10*/ + address = (hjpeg->Instance->DHTMEM + 10UL); + index = 16; + while (index > 3UL) + { + + *address = (((uint32_t)HuffTableAC0->Bits[index - 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC0->Bits[index - 2UL] & 0xFFUL) << 16) | + (((uint32_t)HuffTableAC0->Bits[index - 3UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableAC0->Bits[index - 4UL] & 0xFFUL); + address--; + index -= 4UL; + + } + /* AC0 Huffman Table : Val*/ + /* AC0 VALS is a 162 Bytes table i.e 41x32bits words from DHTMEM base address + 11 to DHTMEM + 51 */ + /* only Byte 0 and Byte 1 of the last word (@ DHTMEM + 51) belong to AC0 VALS table */ + address = (hjpeg->Instance->DHTMEM + 51); + value = *address & 0xFFFF0000U; + value = value | (((uint32_t)HuffTableAC0->HuffVal[161] & 0xFFUL) << 8) | + ((uint32_t)HuffTableAC0->HuffVal[160] & 0xFFUL); + *address = value; + + /*continue setting 160 AC0 huffman values */ + address--; /* address = hjpeg->Instance->DHTMEM + 50*/ + index = JPEG_AC_HUFF_TABLE_SIZE - 2UL; + while (index > 3UL) + { + *address = (((uint32_t)HuffTableAC0->HuffVal[index - 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC0->HuffVal[index - 2UL] & 0xFFUL) << 16) | + (((uint32_t)HuffTableAC0->HuffVal[index - 3UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableAC0->HuffVal[index - 4UL] & 0xFFUL); + address--; + index -= 4UL; + } + + /* DC1 Huffman Table : BITS*/ + /* DC1 BITS is a 16 Bytes table i.e 4x32bits words from DHTMEM + 51 base address to DHTMEM + 55*/ + /* only Byte 2 and Byte 3 of the first word (@ DHTMEM + 51) belong to DC1 Bits table */ + address = (hjpeg->Instance->DHTMEM + 51); + value = *address & 0x0000FFFFU; + value = value | (((uint32_t)HuffTableDC1->Bits[1] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC1->Bits[0] & 0xFFUL) << 16); + *address = value; + + /* only Byte 0 and Byte 1 of the last word (@ DHTMEM + 55) belong to DC1 Bits table */ + address = (hjpeg->Instance->DHTMEM + 55); + value = *address & 0xFFFF0000U; + value = value | (((uint32_t)HuffTableDC1->Bits[15] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC1->Bits[14] & 0xFFUL); + *address = value; + + /*continue setting 12 DC1 huffman Bits from DHTMEM + 54 down to DHTMEM + 52*/ + address--; + index = 12; + while (index > 3UL) + { + + *address = (((uint32_t)HuffTableDC1->Bits[index + 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC1->Bits[index] & 0xFFUL) << 16) | + (((uint32_t)HuffTableDC1->Bits[index - 1UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC1->Bits[index - 2UL] & 0xFFUL); + address--; + index -= 4UL; + + } + /* DC1 Huffman Table : Val*/ + /* DC1 VALS is a 12 Bytes table i.e 3x32bits words from DHTMEM base address +55 to DHTMEM + 58 */ + /* only Byte 2 and Byte 3 of the first word (@ DHTMEM + 55) belong to DC1 Val table */ + address = (hjpeg->Instance->DHTMEM + 55); + value = *address & 0x0000FFFFUL; + value = value | (((uint32_t)HuffTableDC1->HuffVal[1] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC1->HuffVal[0] & 0xFFUL) << 16); + *address = value; + + /* only Byte 0 and Byte 1 of the last word (@ DHTMEM + 58) belong to DC1 Val table */ + address = (hjpeg->Instance->DHTMEM + 58); + value = *address & 0xFFFF0000UL; + value = value | (((uint32_t)HuffTableDC1->HuffVal[11] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC1->HuffVal[10] & 0xFFUL); + *address = value; + + /*continue setting 8 DC1 huffman val from DHTMEM + 57 down to DHTMEM + 56*/ + address--; + index = 8; + while (index > 3UL) + { + *address = (((uint32_t)HuffTableDC1->HuffVal[index + 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableDC1->HuffVal[index] & 0xFFUL) << 16) | + (((uint32_t)HuffTableDC1->HuffVal[index - 1UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableDC1->HuffVal[index - 2UL] & 0xFFUL); + address--; + index -= 4UL; + } + + /* AC1 Huffman Table : BITS*/ + /* AC1 BITS is a 16 Bytes table i.e 4x32bits words from DHTMEM base address + 58 to DHTMEM + 62*/ + /* only Byte 2 and Byte 3 of the first word (@ DHTMEM + 58) belong to AC1 Bits table */ + address = (hjpeg->Instance->DHTMEM + 58); + value = *address & 0x0000FFFFU; + value = value | (((uint32_t)HuffTableAC1->Bits[1] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC1->Bits[0] & 0xFFUL) << 16); + *address = value; + + /* only Byte 0 and Byte 1 of the last word (@ DHTMEM + 62) belong to Bits Val table */ + address = (hjpeg->Instance->DHTMEM + 62); + value = *address & 0xFFFF0000U; + value = value | (((uint32_t)HuffTableAC1->Bits[15] & 0xFFUL) << 8) | ((uint32_t)HuffTableAC1->Bits[14] & 0xFFUL); + *address = value; + + /*continue setting 12 AC1 huffman Bits from DHTMEM + 61 down to DHTMEM + 59*/ + address--; + index = 12; + while (index > 3UL) + { + + *address = (((uint32_t)HuffTableAC1->Bits[index + 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC1->Bits[index] & 0xFFUL) << 16) | + (((uint32_t)HuffTableAC1->Bits[index - 1UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableAC1->Bits[index - 2UL] & 0xFFUL); + address--; + index -= 4UL; + + } + /* AC1 Huffman Table : Val*/ + /* AC1 VALS is a 162 Bytes table i.e 41x32bits words from DHTMEM base address + 62 to DHTMEM + 102 */ + /* only Byte 2 and Byte 3 of the first word (@ DHTMEM + 62) belong to AC1 VALS table */ + address = (hjpeg->Instance->DHTMEM + 62); + value = *address & 0x0000FFFFUL; + value = value | (((uint32_t)HuffTableAC1->HuffVal[1] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC1->HuffVal[0] & 0xFFUL) << 16); + *address = value; + + /*continue setting 160 AC1 huffman values from DHTMEM + 63 to DHTMEM+102 */ + address = (hjpeg->Instance->DHTMEM + 102); + index = JPEG_AC_HUFF_TABLE_SIZE - 2UL; + while (index > 3UL) + { + *address = (((uint32_t)HuffTableAC1->HuffVal[index + 1UL] & 0xFFUL) << 24) | + (((uint32_t)HuffTableAC1->HuffVal[index] & 0xFFUL) << 16) | + (((uint32_t)HuffTableAC1->HuffVal[index - 1UL] & 0xFFUL) << 8) | + ((uint32_t)HuffTableAC1->HuffVal[index - 2UL] & 0xFFUL); + address--; + index -= 4UL; + } + +} + +/** + * @brief Configure the JPEG registers with a given quantization table + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param QTable pointer to an array of 64 bytes giving the quantization table + * @param QTableAddress destination quantization address in the JPEG peripheral + * it could be QMEM0, QMEM1, QMEM2 or QMEM3 + * @retval 0 if no error, 1 if error + */ +static uint32_t JPEG_Set_Quantization_Mem(const JPEG_HandleTypeDef *hjpeg, const uint8_t *QTable, + __IO uint32_t *QTableAddress) +{ + uint32_t i; + uint32_t j; + uint32_t quantRow; + uint32_t quantVal; + uint32_t ScaleFactor; + __IO uint32_t *tableAddress; + + tableAddress = QTableAddress; + + if ((hjpeg->Conf.ImageQuality >= 50UL) && (hjpeg->Conf.ImageQuality <= 100UL)) + { + ScaleFactor = JPEG_HIGH_QUALITY_REFERENCE - (hjpeg->Conf.ImageQuality * 2UL); + } + else if (hjpeg->Conf.ImageQuality > 0UL) + { + ScaleFactor = JPEG_LOW_QUALITY_REFERENCE / ((uint32_t) hjpeg->Conf.ImageQuality); + } + else + { + return 1UL; + } + + /*Quantization_table = (Standard_quanization_table * ScaleFactor + 50) / 100*/ + i = 0; + while (i < (JPEG_QUANT_TABLE_SIZE - 3UL)) + { + quantRow = 0; + for (j = 0; j < 4UL; j++) + { + /* Note that the quantization coefficients must be specified in the table in zigzag order */ + quantVal = ((((uint32_t) QTable[JPEG_ZIGZAG_ORDER[i + j]]) * ScaleFactor) + 50UL) / 100UL; + + if (quantVal == 0UL) + { + quantVal = 1UL; + } + else if (quantVal > 255UL) + { + quantVal = JPEG_QUANTVAL_MAX; + } + else + { + /* Nothing to do, keep same value of quantVal */ + } + + quantRow |= ((quantVal & 0xFFUL) << (8UL * j)); + } + + i += 4UL; + *tableAddress = quantRow; + tableAddress ++; + } + + /* Return function status */ + return 0UL; +} + +/** + * @brief Configure the JPEG registers for YCbCr color space + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static void JPEG_SetColorYCBCR(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t ySamplingH; + uint32_t ySamplingV; + uint32_t yblockNb; + + /*Set Number of color components to 3*/ + hjpeg->Instance->CONFR1 &= ~JPEG_CONFR1_NF; + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_NF_1; + + /* compute MCU block size and Y, Cb ,Cr sampling factors*/ + if (hjpeg->Conf.ChromaSubsampling == JPEG_420_SUBSAMPLING) + { + ySamplingH = JPEG_CONFR4_HSF_1; /* Hs = 2*/ + ySamplingV = JPEG_CONFR4_VSF_1; /* Vs = 2*/ + + yblockNb = 0x30; /* 4 blocks of 8x8*/ + } + else if (hjpeg->Conf.ChromaSubsampling == JPEG_422_SUBSAMPLING) + { + ySamplingH = JPEG_CONFR4_HSF_1; /* Hs = 2*/ + ySamplingV = JPEG_CONFR4_VSF_0; /* Vs = 1*/ + + yblockNb = 0x10; /* 2 blocks of 8x8*/ + } + else /*JPEG_444_SUBSAMPLING and default*/ + { + ySamplingH = JPEG_CONFR4_HSF_0; /* Hs = 1*/ + ySamplingV = JPEG_CONFR4_VSF_0; /* Vs = 1*/ + + yblockNb = 0; /* 1 block of 8x8*/ + } + + hjpeg->Instance->CONFR1 &= ~(JPEG_CONFR1_NF | JPEG_CONFR1_NS); + hjpeg->Instance->CONFR1 |= (JPEG_CONFR1_NF_1 | JPEG_CONFR1_NS_1); + + /*Reset CONFR4 register*/ + hjpeg->Instance->CONFR4 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 0*/ + hjpeg->Instance->CONFR4 |= (ySamplingH | ySamplingV | (yblockNb & JPEG_CONFR4_NB)); + + /*Reset CONFR5 register*/ + hjpeg->Instance->CONFR5 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 1*/ + hjpeg->Instance->CONFR5 |= (JPEG_CONFR5_HSF_0 | JPEG_CONFR5_VSF_0 | JPEG_CONFR5_QT_0 | JPEG_CONFR5_HA | + JPEG_CONFR5_HD); + + /*Reset CONFR6 register*/ + hjpeg->Instance->CONFR6 = 0; + /*Set Horizental and Vertical sampling factor and number of blocks for component 2*/ + /* In YCBCR , by default, both chrominance components (component 1 and component 2) + use the same Quantization table (table 1) */ + /* In YCBCR , both chrominance components (component 1 and component 2) use the same Huffman tables (table 1) */ + hjpeg->Instance->CONFR6 |= (JPEG_CONFR6_HSF_0 | JPEG_CONFR6_VSF_0 | JPEG_CONFR6_QT_0 | JPEG_CONFR6_HA | + JPEG_CONFR6_HD); + +} + +/** + * @brief Configure the JPEG registers for GrayScale color space + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static void JPEG_SetColorGrayScale(JPEG_HandleTypeDef *hjpeg) +{ + /*Set Number of color components to 1*/ + hjpeg->Instance->CONFR1 &= ~(JPEG_CONFR1_NF | JPEG_CONFR1_NS); + + /*in GrayScale use 1 single Quantization table (Table 0)*/ + /*in GrayScale use only one couple of AC/DC huffman table (table 0)*/ + + /*Reset CONFR4 register*/ + hjpeg->Instance->CONFR4 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 0*/ + hjpeg->Instance->CONFR4 |= JPEG_CONFR4_HSF_0 | JPEG_CONFR4_VSF_0 ; +} + +/** + * @brief Configure the JPEG registers for CMYK color space + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static void JPEG_SetColorCMYK(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t ySamplingH; + uint32_t ySamplingV; + uint32_t yblockNb; + + /*Set Number of color components to 4*/ + hjpeg->Instance->CONFR1 |= (JPEG_CONFR1_NF | JPEG_CONFR1_NS); + + /* compute MCU block size and Y, Cb ,Cr sampling factors*/ + if (hjpeg->Conf.ChromaSubsampling == JPEG_420_SUBSAMPLING) + { + ySamplingH = JPEG_CONFR4_HSF_1; /* Hs = 2*/ + ySamplingV = JPEG_CONFR4_VSF_1; /* Vs = 2*/ + + yblockNb = 0x30; /* 4 blocks of 8x8*/ + } + else if (hjpeg->Conf.ChromaSubsampling == JPEG_422_SUBSAMPLING) + { + ySamplingH = JPEG_CONFR4_HSF_1; /* Hs = 2*/ + ySamplingV = JPEG_CONFR4_VSF_0; /* Vs = 1*/ + + yblockNb = 0x10; /* 2 blocks of 8x8*/ + } + else /*JPEG_444_SUBSAMPLING and default*/ + { + ySamplingH = JPEG_CONFR4_HSF_0; /* Hs = 1*/ + ySamplingV = JPEG_CONFR4_VSF_0; /* Vs = 1*/ + + yblockNb = 0; /* 1 block of 8x8*/ + } + + /*Reset CONFR4 register*/ + hjpeg->Instance->CONFR4 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 0*/ + hjpeg->Instance->CONFR4 |= (ySamplingH | ySamplingV | (yblockNb & JPEG_CONFR4_NB)); + + /*Reset CONFR5 register*/ + hjpeg->Instance->CONFR5 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 1*/ + hjpeg->Instance->CONFR5 |= (JPEG_CONFR5_HSF_0 | JPEG_CONFR5_VSF_0); + + /*Reset CONFR6 register*/ + hjpeg->Instance->CONFR6 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 2*/ + hjpeg->Instance->CONFR6 |= (JPEG_CONFR6_HSF_0 | JPEG_CONFR6_VSF_0); + + /*Reset CONFR7 register*/ + hjpeg->Instance->CONFR7 = 0; + /*Set Horizental and Vertical sampling factor , number of blocks, + Quantization table and Huffman AC/DC tables for component 3*/ + hjpeg->Instance->CONFR7 |= (JPEG_CONFR7_HSF_0 | JPEG_CONFR7_VSF_0); +} + +/** + * @brief Init the JPEG encoding/decoding process in case of Polling or Interrupt and DMA + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None + */ +static void JPEG_Init_Process(JPEG_HandleTypeDef *hjpeg) +{ + /*Reset pause*/ + hjpeg->Context &= (~(JPEG_CONTEXT_PAUSE_INPUT | JPEG_CONTEXT_PAUSE_OUTPUT)); + + if ((hjpeg->Context & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { + /*Set JPEG Codec to Decoding mode */ + hjpeg->Instance->CONFR1 |= JPEG_CONFR1_DE; + } + else /* JPEG_CONTEXT_ENCODE */ + { + /*Set JPEG Codec to Encoding mode */ + hjpeg->Instance->CONFR1 &= ~JPEG_CONFR1_DE; + } + + /*Stop JPEG processing */ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + /* Disable All Interrupts */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + /* Disable All DMA requests */ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_MASK); + /* Flush input and output FIFOs*/ + hjpeg->Instance->CR |= JPEG_CR_IFF; + hjpeg->Instance->CR |= JPEG_CR_OFF; + + /* Clear all flags */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_ALL); + + /*Start Encoding/Decoding*/ + hjpeg->Instance->CONFR0 |= JPEG_CONFR0_START; + + if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_IT) + { + /*Enable IN/OUT, end of Conversation, and end of header parsing interruptions*/ + __HAL_JPEG_ENABLE_IT(hjpeg, JPEG_IT_IFT | JPEG_IT_IFNF | JPEG_IT_OFT | JPEG_IT_OFNE | JPEG_IT_EOC | JPEG_IT_HPD); + } + else if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_DMA) + { + /*Enable End Of Conversation, and End Of Header parsing interruptions*/ + __HAL_JPEG_ENABLE_IT(hjpeg, JPEG_IT_EOC | JPEG_IT_HPD); + + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief JPEG encoding/decoding process in case of Polling or Interrupt + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG_PROCESS_DONE if the process has ends else JPEG_PROCESS_ONGOING + */ +static uint32_t JPEG_Process(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t tmpContext; + + /*End of header processing flag */ + if ((hjpeg->Context & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_HPDF) != 0UL) + { + /*Call Header parsing complete callback */ + (void) HAL_JPEG_GetInfo(hjpeg, &hjpeg->Conf); + /* Reset the ImageQuality */ + hjpeg->Conf.ImageQuality = 0; + /* Note : the image quality is only available at the end of the decoding operation */ + /* at the current stage the calculated image quality is not correct so reset it */ + + /*Call Info Ready callback */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->InfoReadyCallback(hjpeg, &hjpeg->Conf); +#else + HAL_JPEG_InfoReadyCallback(hjpeg, &hjpeg->Conf); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_IT_HPD); + + /* Clear header processing done flag */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_HPDF); + } + } + + /*Input FIFO status handling*/ + if ((hjpeg->Context & JPEG_CONTEXT_PAUSE_INPUT) == 0UL) + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_IFTF) != 0UL) + { + /*Input FIFO threshold flag */ + /*JPEG_FIFO_TH_SIZE words can be written in */ + JPEG_ReadInputData(hjpeg, JPEG_FIFO_TH_SIZE); + } + else if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_IFNFF) != 0UL) + { + /*Input FIFO Not Full flag */ + /*32-bit value can be written in */ + JPEG_ReadInputData(hjpeg, 1); + } + else + { + /* Nothing to do */ + } + } + + + /*Output FIFO flag handling*/ + if ((hjpeg->Context & JPEG_CONTEXT_PAUSE_OUTPUT) == 0UL) + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_OFTF) != 0UL) + { + /*Output FIFO threshold flag */ + /*JPEG_FIFO_TH_SIZE words can be read out */ + JPEG_StoreOutputData(hjpeg, JPEG_FIFO_TH_SIZE); + } + else if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_OFNEF) != 0UL) + { + /*Output FIFO Not Empty flag */ + /*32-bit value can be read out */ + JPEG_StoreOutputData(hjpeg, 1); + } + else + { + /* Nothing to do */ + } + } + + /*End of Conversion handling :i.e EOC flag is high and OFTF low and OFNEF low*/ + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_EOCF | JPEG_FLAG_OFTF | JPEG_FLAG_OFNEF) == JPEG_FLAG_EOCF) + { + /*Stop Encoding/Decoding*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + if ((hjpeg->Context & JPEG_CONTEXT_METHOD_MASK) == JPEG_CONTEXT_IT) + { + /* Disable All Interrupts */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + } + + /* Clear all flags */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_ALL); + + /*Call End of conversion callback */ + if (hjpeg->JpegOutCount > 0UL) + { + /*Output Buffer is not empty, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + } + + /*Reset Context Operation*/ + tmpContext = hjpeg->Context; + /*Clear all context fields execpt JPEG_CONTEXT_CONF_ENCODING and JPEG_CONTEXT_CUSTOM_TABLES*/ + hjpeg->Context &= (JPEG_CONTEXT_CONF_ENCODING | JPEG_CONTEXT_CUSTOM_TABLES); + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /*Call End of Encoding/Decoding callback */ + if ((tmpContext & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DecodeCpltCallback(hjpeg); +#else + HAL_JPEG_DecodeCpltCallback(hjpeg); +#endif /*USE_HAL_JPEG_REGISTER_CALLBACKS*/ + } + else /* JPEG_CONTEXT_ENCODE */ + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->EncodeCpltCallback(hjpeg); +#else + HAL_JPEG_EncodeCpltCallback(hjpeg); +#endif /*USE_HAL_JPEG_REGISTER_CALLBACKS*/ + } + + return JPEG_PROCESS_DONE; + } + + + return JPEG_PROCESS_ONGOING; +} + +/** + * @brief Store some output data from the JPEG peripheral to the output buffer. + * This function is used when the JPEG peripheral has new data to output + * in case of Polling or Interrupt process + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param nbOutputWords Number of output words (of 32 bits) ready from the JPEG peripheral + * @retval None + */ +static void JPEG_StoreOutputData(JPEG_HandleTypeDef *hjpeg, uint32_t nbOutputWords) +{ + uint32_t index; + uint32_t nb_words; + uint32_t nb_bytes; + uint32_t dataword; + + if (hjpeg->OutDataLength >= (hjpeg->JpegOutCount + (nbOutputWords * 4UL))) + { + for (index = 0; index < nbOutputWords; index++) + { + /*Transfer 32 bits from the JPEG output FIFO*/ + dataword = hjpeg->Instance->DOR; + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount] = (uint8_t)(dataword & 0x000000FFUL); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 1UL] = (uint8_t)((dataword & 0x0000FF00UL) >> 8); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 2UL] = (uint8_t)((dataword & 0x00FF0000UL) >> 16); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 3UL] = (uint8_t)((dataword & 0xFF000000UL) >> 24); + hjpeg->JpegOutCount += 4UL; + } + if (hjpeg->OutDataLength == hjpeg->JpegOutCount) + { + /*Output Buffer is full, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /*USE_HAL_JPEG_REGISTER_CALLBACKS*/ + hjpeg->JpegOutCount = 0; + } + } + else if (hjpeg->OutDataLength > hjpeg->JpegOutCount) + { + nb_words = (hjpeg->OutDataLength - hjpeg->JpegOutCount) / 4UL; + for (index = 0; index < nb_words; index++) + { + /*Transfer 32 bits from the JPEG output FIFO*/ + dataword = hjpeg->Instance->DOR; + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount] = (uint8_t)(dataword & 0x000000FFUL); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 1UL] = (uint8_t)((dataword & 0x0000FF00UL) >> 8); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 2UL] = (uint8_t)((dataword & 0x00FF0000UL) >> 16); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 3UL] = (uint8_t)((dataword & 0xFF000000UL) >> 24); + hjpeg->JpegOutCount += 4UL; + } + if (hjpeg->OutDataLength == hjpeg->JpegOutCount) + { + /*Output Buffer is full, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + hjpeg->JpegOutCount = 0; + } + else + { + nb_bytes = hjpeg->OutDataLength - hjpeg->JpegOutCount; + dataword = hjpeg->Instance->DOR; + for (index = 0; index < nb_bytes; index++) + { + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount] = (uint8_t)((dataword >> (8UL * (index & 0x3UL))) & 0xFFUL); + hjpeg->JpegOutCount++; + } + /*Output Buffer is full, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + + nb_bytes = 4UL - nb_bytes; + for (index = nb_bytes; index < 4UL; index++) + { + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount] = (uint8_t)((dataword >> (8UL * index)) & 0xFFUL); + hjpeg->JpegOutCount++; + } + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief Read some input Data from the input buffer. + * This function is used when the JPEG peripheral needs new data + * in case of Polling or Interrupt process + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @param nbRequestWords Number of input words (of 32 bits) that the JPE peripheral request + * @retval None + */ +static void JPEG_ReadInputData(JPEG_HandleTypeDef *hjpeg, uint32_t nbRequestWords) +{ + uint32_t nb_bytes = 0; + uint32_t nb_words; + uint32_t index; + uint32_t dataword; + uint32_t input_count; + + if ((hjpeg->InDataLength == 0UL) || (nbRequestWords == 0UL)) + { + /* No more Input data : nothing to do*/ + (void) HAL_JPEG_Pause(hjpeg, JPEG_PAUSE_RESUME_INPUT); + } + else if (hjpeg->InDataLength > hjpeg->JpegInCount) + { + nb_bytes = hjpeg->InDataLength - hjpeg->JpegInCount; + } + else if (hjpeg->InDataLength == hjpeg->JpegInCount) + { + /*Call HAL_JPEG_GetDataCallback to get new data */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->GetDataCallback(hjpeg, hjpeg->JpegInCount); +#else + HAL_JPEG_GetDataCallback(hjpeg, hjpeg->JpegInCount); +#endif /*USE_HAL_JPEG_REGISTER_CALLBACKS*/ + + if (hjpeg->InDataLength > 4UL) + { + hjpeg->InDataLength = ((hjpeg->InDataLength + 3UL) / 4UL) * 4UL; + } + hjpeg->JpegInCount = 0; + nb_bytes = hjpeg->InDataLength; + } + else + { + /* Nothing to do */ + } + if (((hjpeg->Context & JPEG_CONTEXT_PAUSE_INPUT) == 0UL) && (nb_bytes > 0UL)) + { + nb_words = nb_bytes / 4UL; + if (nb_words >= nbRequestWords) + { + for (index = 0; index < nbRequestWords; index++) + { + input_count = hjpeg->JpegInCount; + hjpeg->Instance->DIR = (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count])) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 1UL])) << 8) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 2UL])) << 16) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 3UL])) << 24)); + + hjpeg->JpegInCount += 4UL; + } + } + else /*nb_words < nbRequestWords*/ + { + if (nb_words > 0UL) + { + for (index = 0; index < nb_words; index++) + { + input_count = hjpeg->JpegInCount; + hjpeg->Instance->DIR = (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count])) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 1UL])) << 8) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 2UL])) << 16) | \ + (((uint32_t)(hjpeg->pJpegInBuffPtr[input_count + 3UL])) << 24)); + + hjpeg->JpegInCount += 4UL; + } + } + else + { + /* end of file*/ + dataword = 0; + for (index = 0; index < nb_bytes; index++) + { + dataword |= (uint32_t)hjpeg->pJpegInBuffPtr[hjpeg->JpegInCount] << (8UL * (index & 0x03UL)); + hjpeg->JpegInCount++; + } + hjpeg->Instance->DIR = dataword; + } + } + } +} + +/** + * @brief Start the JPEG DMA process (encoding/decoding) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG_PROCESS_DONE if process ends else JPEG_PROCESS_ONGOING + */ +static HAL_StatusTypeDef JPEG_DMA_StartProcess(JPEG_HandleTypeDef *hjpeg) +{ + if ((hjpeg->InDataLength < 4UL) || (hjpeg->OutDataLength < 4UL)) + { + return HAL_ERROR; + } + /* Reset Ending DMA internal context flag*/ + hjpeg->Context &= ~JPEG_CONTEXT_ENDING_DMA; + + /* Disable DMA In/Out Request*/ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_ODMA | JPEG_DMA_IDMA); + + /* Set the JPEG DMA In transfer complete callback */ + hjpeg->hdmain->XferCpltCallback = JPEG_DMAInCpltCallback; + /* Set the DMA In error callback */ + hjpeg->hdmain->XferErrorCallback = JPEG_DMAErrorCallback; + + /* Set the JPEG DMA Out transfer complete callback */ + hjpeg->hdmaout->XferCpltCallback = JPEG_DMAOutCpltCallback; + /* Set the DMA Out error callback */ + hjpeg->hdmaout->XferErrorCallback = JPEG_DMAErrorCallback; + /* Set the DMA Out Abort callback */ + hjpeg->hdmaout->XferAbortCallback = JPEG_DMAOutAbortCallback; + + /*DMA transfer size must be a multiple of 4 bytes i.e multiple of 32bits words*/ + hjpeg->InDataLength = hjpeg->InDataLength - (hjpeg->InDataLength % 4UL); + + /*DMA transfer size must be a multiple of 4 bytes i.e multiple of 32bits words*/ + hjpeg->OutDataLength = hjpeg->OutDataLength - (hjpeg->OutDataLength % 4UL); + + if ((hjpeg->hdmain->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hjpeg->hdmain->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hjpeg->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hjpeg->InDataLength; + + /* Set DMA source address */ + hjpeg->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hjpeg->pJpegInBuffPtr; + + /* Set DMA destination address */ + hjpeg->hdmain->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hjpeg->Instance->DIR; + + if (HAL_DMAEx_List_Start_IT(hjpeg->hdmain) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + /* Set the JPEG State to ready */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /* Update JPEG error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + else + { + /* Start DMA FIFO In transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmain, (uint32_t)hjpeg->pJpegInBuffPtr, (uint32_t)&hjpeg->Instance->DIR, + hjpeg->InDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + return HAL_ERROR; + } + } + + if ((hjpeg->hdmaout->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hjpeg->hdmaout->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hjpeg->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hjpeg->OutDataLength; + + /* Set DMA source address */ + hjpeg->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hjpeg->Instance->DOR; + + /* Set DMA destination address */ + hjpeg->hdmaout->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hjpeg->pJpegOutBuffPtr; + + if (HAL_DMAEx_List_Start_IT(hjpeg->hdmaout) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + /* Set the JPEG State to ready */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /* Update JPEG error code */ + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + return HAL_ERROR; + } + } + else + { + /* Start DMA FIFO Out transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmaout, (uint32_t)&hjpeg->Instance->DOR, (uint32_t)hjpeg->pJpegOutBuffPtr, + hjpeg->OutDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + return HAL_ERROR; + } + } + + /* Enable JPEG In/Out DMA requests*/ + JPEG_ENABLE_DMA(hjpeg, JPEG_DMA_IDMA | JPEG_DMA_ODMA); + + return HAL_OK; +} + +/** + * @brief Continue the current JPEG DMA process (encoding/decoding) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG_PROCESS_DONE if process ends else JPEG_PROCESS_ONGOING + */ +static void JPEG_DMA_ContinueProcess(JPEG_HandleTypeDef *hjpeg) +{ + /*End of header processing flag rises*/ + if ((hjpeg->Context & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_HPDF) != 0UL) + { + /*Call Header parsing complete callback */ + (void) HAL_JPEG_GetInfo(hjpeg, &hjpeg->Conf); + + /* Reset the ImageQuality */ + hjpeg->Conf.ImageQuality = 0; + /* Note : the image quality is only available at the end of the decoding operation */ + /* at the current stage the calculated image quality is not correct so reset it */ + + /*Call Info Ready callback */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->InfoReadyCallback(hjpeg, &hjpeg->Conf); +#else + HAL_JPEG_InfoReadyCallback(hjpeg, &hjpeg->Conf); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_IT_HPD); + + /* Clear header processing done flag */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_HPDF); + } + } + + /*End of Conversion handling*/ + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_EOCF) != 0UL) + { + /*Disabkle JPEG In/Out DMA Requests*/ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_ODMA | JPEG_DMA_IDMA); + + hjpeg->Context |= JPEG_CONTEXT_ENDING_DMA; + + /*Stop Encoding/Decoding*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + /* Clear all flags */ + __HAL_JPEG_CLEAR_FLAG(hjpeg, JPEG_FLAG_ALL); + + if (hjpeg->hdmain->State == HAL_DMA_STATE_BUSY) + { + /* Stop the DMA In Xfer*/ + (void) HAL_DMA_Abort(hjpeg->hdmain); + } + + if (hjpeg->hdmaout->State == HAL_DMA_STATE_BUSY) + { + /* Stop the DMA out Xfer*/ + (void) HAL_DMA_Abort(hjpeg->hdmaout); + } + + JPEG_DMA_EndProcess(hjpeg); + } + + +} + +/** + * @brief Finalize the current JPEG DMA process (encoding/decoding) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG_PROCESS_DONE + */ +static void JPEG_DMA_EndProcess(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t tmpContext; + hjpeg->JpegOutCount = hjpeg->OutDataLength - JPEG_GET_DMA_REMAIN_DATA(hjpeg->hdmaout); + + /*if Output Buffer is full, call HAL_JPEG_DataReadyCallback*/ + if (hjpeg->JpegOutCount == hjpeg->OutDataLength) + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + } + + /*Check if remaining data in the output FIFO*/ + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_OFNEF) == 0UL) + { + if (hjpeg->JpegOutCount > 0UL) + { + /*Output Buffer is not empty, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + } + + /*Stop Encoding/Decoding*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + tmpContext = hjpeg->Context; + /*Clear all context fields execpt JPEG_CONTEXT_CONF_ENCODING and JPEG_CONTEXT_CUSTOM_TABLES*/ + hjpeg->Context &= (JPEG_CONTEXT_CONF_ENCODING | JPEG_CONTEXT_CUSTOM_TABLES); + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /*Call End of Encoding/Decoding callback */ + if ((tmpContext & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DecodeCpltCallback(hjpeg); +#else + HAL_JPEG_DecodeCpltCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + } + else /* JPEG_CONTEXT_ENCODE */ + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->EncodeCpltCallback(hjpeg); +#else + HAL_JPEG_EncodeCpltCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + } + } + else if ((hjpeg->Context & JPEG_CONTEXT_PAUSE_OUTPUT) == 0UL) + { + JPEG_DMA_PollResidualData(hjpeg); + } + else + { + /* Nothing to do */ + } + +} + +/** + * @brief Poll residual output data when DMA process (encoding/decoding) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval None. + */ +static void JPEG_DMA_PollResidualData(JPEG_HandleTypeDef *hjpeg) +{ + uint32_t tmpContext; + uint32_t count; + uint32_t dataOut; + + for (count = JPEG_FIFO_SIZE; count > 0UL; count--) + { + if ((hjpeg->Context & JPEG_CONTEXT_PAUSE_OUTPUT) == 0UL) + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_OFNEF) != 0UL) + { + dataOut = hjpeg->Instance->DOR; + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount] = (uint8_t)(dataOut & 0x000000FFUL); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 1UL] = (uint8_t)((dataOut & 0x0000FF00UL) >> 8); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 2UL] = (uint8_t)((dataOut & 0x00FF0000UL) >> 16); + hjpeg->pJpegOutBuffPtr[hjpeg->JpegOutCount + 3UL] = (uint8_t)((dataOut & 0xFF000000UL) >> 24); + hjpeg->JpegOutCount += 4UL; + + if (hjpeg->JpegOutCount == hjpeg->OutDataLength) + { + /*Output Buffer is full, call HAL_JPEG_DataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + } + + } + } + } + + tmpContext = hjpeg->Context; + + if ((__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_OFNEF) == 0UL) || ((tmpContext & JPEG_CONTEXT_PAUSE_OUTPUT) == 0UL)) + { + /*Stop Encoding/Decoding*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + if (hjpeg->JpegOutCount > 0UL) + { + /*Output Buffer is not empty, call DecodedDataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + hjpeg->JpegOutCount = 0; + } + + tmpContext = hjpeg->Context; + /*Clear all context fields execpt JPEG_CONTEXT_CONF_ENCODING and JPEG_CONTEXT_CUSTOM_TABLES*/ + hjpeg->Context &= (JPEG_CONTEXT_CONF_ENCODING | JPEG_CONTEXT_CUSTOM_TABLES); + + /* Process Unlocked */ + __HAL_UNLOCK(hjpeg); + + /* Change the JPEG state */ + hjpeg->State = HAL_JPEG_STATE_READY; + + /*Call End of Encoding/Decoding callback */ + if ((tmpContext & JPEG_CONTEXT_OPERATION_MASK) == JPEG_CONTEXT_DECODE) + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DecodeCpltCallback(hjpeg); +#else + HAL_JPEG_DecodeCpltCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + } + else /* JPEG_CONTEXT_ENCODE */ + { +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->EncodeCpltCallback(hjpeg); +#else + HAL_JPEG_EncodeCpltCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA input transfer complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure. + * @retval None + */ +static void JPEG_DMAInCpltCallback(DMA_HandleTypeDef *hdma) +{ + JPEG_HandleTypeDef *hjpeg = (JPEG_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable The JPEG IT so the DMA Input Callback can not be interrupted by the JPEG EOC IT or JPEG HPD IT */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + if ((hjpeg->Context & (JPEG_CONTEXT_METHOD_MASK | JPEG_CONTEXT_ENDING_DMA)) == + JPEG_CONTEXT_DMA) /* Check if context method is DMA and we are not in ending DMA stage */ + { + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_IDMA); + + hjpeg->JpegInCount = hjpeg->InDataLength - JPEG_GET_DMA_REMAIN_DATA(hdma); + + /*Call HAL_JPEG_GetDataCallback to get new data */ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->GetDataCallback(hjpeg, hjpeg->JpegInCount); +#else + HAL_JPEG_GetDataCallback(hjpeg, hjpeg->JpegInCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + if (hjpeg->InDataLength >= 4UL) + { + /*JPEG Input DMA transfer data number must be multiple of 32 bits word + as the destination is a 32 bits (4 bytes) register */ + hjpeg->InDataLength = ((hjpeg->InDataLength + 3UL) / 4UL) * 4UL; + } + else + { + /* Nothing to do */ + } + + if (((hjpeg->Context & JPEG_CONTEXT_PAUSE_INPUT) == 0UL) && (hjpeg->InDataLength > 0UL)) + { + /* Start DMA FIFO In transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmain, (uint32_t)hjpeg->pJpegInBuffPtr, (uint32_t)&hjpeg->Instance->DIR, + hjpeg->InDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + hjpeg->State = HAL_JPEG_STATE_ERROR; +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->ErrorCallback(hjpeg); +#else + HAL_JPEG_ErrorCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + return; + } + JPEG_ENABLE_DMA(hjpeg, JPEG_DMA_IDMA); + } + + /* JPEG Conversion still on going : Enable the JPEG IT */ + __HAL_JPEG_ENABLE_IT(hjpeg, JPEG_IT_EOC | JPEG_IT_HPD); + } +} + +/** + * @brief DMA output transfer complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure. + * @retval None + */ +static void JPEG_DMAOutCpltCallback(DMA_HandleTypeDef *hdma) +{ + JPEG_HandleTypeDef *hjpeg = (JPEG_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable The JPEG IT so the DMA Output Callback can not be interrupted by the JPEG EOC IT or JPEG HPD IT */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + if ((hjpeg->Context & (JPEG_CONTEXT_METHOD_MASK | JPEG_CONTEXT_ENDING_DMA)) == + JPEG_CONTEXT_DMA) /* Check if context method is DMA and we are not in ending DMA stage */ + { + if (__HAL_JPEG_GET_FLAG(hjpeg, JPEG_FLAG_EOCF) == 0UL) + { + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_ODMA); + hjpeg->JpegOutCount = hjpeg->OutDataLength - JPEG_GET_DMA_REMAIN_DATA(hdma); + + /*Output Buffer is full, call HAL_JPEG_DataReadyCallback*/ +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#else + HAL_JPEG_DataReadyCallback(hjpeg, hjpeg->pJpegOutBuffPtr, hjpeg->JpegOutCount); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + + if ((hjpeg->Context & JPEG_CONTEXT_PAUSE_OUTPUT) == 0UL) + { + /* Start DMA FIFO Out transfer */ + if (HAL_DMA_Start_IT(hjpeg->hdmaout, (uint32_t)&hjpeg->Instance->DOR, (uint32_t)hjpeg->pJpegOutBuffPtr, + hjpeg->OutDataLength) != HAL_OK) + { + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; + hjpeg->State = HAL_JPEG_STATE_ERROR; +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->ErrorCallback(hjpeg); +#else + HAL_JPEG_ErrorCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + return; + } + JPEG_ENABLE_DMA(hjpeg, JPEG_DMA_ODMA); + } + } + + /* JPEG Conversion still on going : Enable the JPEG IT */ + __HAL_JPEG_ENABLE_IT(hjpeg, JPEG_IT_EOC | JPEG_IT_HPD); + } +} + + +/** + * @brief DMA Transfer error callback + * @param hdma pointer to a DMA_HandleTypeDef structure. + * @retval None + */ +static void JPEG_DMAErrorCallback(DMA_HandleTypeDef *hdma) +{ + JPEG_HandleTypeDef *hjpeg = (JPEG_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_NONE) + { + /*Stop Encoding/Decoding*/ + hjpeg->Instance->CONFR0 &= ~JPEG_CONFR0_START; + + /* Disable All Interrupts */ + __HAL_JPEG_DISABLE_IT(hjpeg, JPEG_INTERRUPT_MASK); + + /* Disable All DMA requests */ + JPEG_DISABLE_DMA(hjpeg, JPEG_DMA_MASK); + + hjpeg->State = HAL_JPEG_STATE_READY; + hjpeg->ErrorCode |= HAL_JPEG_ERROR_DMA; +#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1) + hjpeg->ErrorCallback(hjpeg); +#else + HAL_JPEG_ErrorCallback(hjpeg); +#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA output Abort callback + * @param hdma pointer to a DMA_HandleTypeDef structure. + * @retval None + */ +static void JPEG_DMAOutAbortCallback(DMA_HandleTypeDef *hdma) +{ + JPEG_HandleTypeDef *hjpeg = (JPEG_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if ((hjpeg->Context & JPEG_CONTEXT_ENDING_DMA) != 0UL) + { + JPEG_DMA_EndProcess(hjpeg); + } +} + + +/** + * @brief Calculate the decoded image quality (from 1 to 100) + * @param hjpeg pointer to a JPEG_HandleTypeDef structure that contains + * the configuration information for JPEG module + * @retval JPEG image quality from 1 to 100. + */ +static uint32_t JPEG_GetQuality(const JPEG_HandleTypeDef *hjpeg) +{ + uint32_t quality = 0; + uint32_t quantRow; + uint32_t quantVal; + uint32_t scale; + uint32_t i; + uint32_t j; + const __IO uint32_t *tableAddress = hjpeg->Instance->QMEM0; + + i = 0; + while (i < (JPEG_QUANT_TABLE_SIZE - 3UL)) + { + quantRow = *tableAddress; + for (j = 0; j < 4UL; j++) + { + quantVal = (quantRow >> (8UL * j)) & 0xFFUL; + if (quantVal == 1UL) + { + /* if Quantization value = 1 then quality is 100%*/ + quality += 100UL; + } + else + { + /* Note that the quantization coefficients must be specified in the table in zigzag order */ + scale = (quantVal * 100UL) / ((uint32_t) hjpeg->QuantTable0[JPEG_ZIGZAG_ORDER[i + j]]); + + if (scale <= 100UL) + { + quality += (200UL - scale) / 2UL; + } + else + { + quality += 5000UL / scale; + } + } + } + + i += 4UL; + tableAddress ++; + } + + return (quality / 64UL); +} +/** + * @} + */ + +/** + * @} + */ +#endif /* JPEG */ +#endif /* HAL_JPEG_MODULE_ENABLED */ + + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_lptim.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_lptim.c new file mode 100644 index 000000000..4afa50b3f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_lptim.c @@ -0,0 +1,3777 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_lptim.c + * @author MCD Application Team + * @brief LPTIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Low Power Timer (LPTIM) peripheral: + * + Initialization and de-initialization functions. + * + Start/Stop operation functions in polling mode. + * + Start/Stop operation functions in interrupt mode. + * + Reading operation functions. + * + Peripheral State functions. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LPTIM HAL driver can be used as follows: + + (#)Initialize the LPTIM low level resources by implementing the + HAL_LPTIM_MspInit(): + (++) Enable the LPTIM interface clock using __HAL_RCC_LPTIMx_CLK_ENABLE(). + (++) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()): + (+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority(). + (+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ(). + (+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler(). + + (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function + configures mainly: + (++) The instance: LPTIM1, LPTIM2, LPTIM3, LPTIM4 or LPTIM5. + (++) Clock: the counter clock. + (+++) Source : it can be either the ULPTIM input (IN1) or one of + the internal clock; (APB, LSE or LSI). + (+++) Prescaler: select the clock divider. + (++) UltraLowPowerClock : To be used only if the ULPTIM is selected + as counter clock source. + (+++) Polarity: polarity of the active edge for the counter unit + if the ULPTIM input is selected. + (+++) SampleTime: clock sampling time to configure the clock glitch + filter. + (++) Trigger: How the counter start. + (+++) Source: trigger can be software or one of the hardware triggers. + (+++) ActiveEdge : only for hardware trigger. + (+++) SampleTime : trigger sampling time to configure the trigger + glitch filter. + (++) OutputPolarity : 2 opposite polarities are possible. + (++) UpdateMode: specifies whether the update of the autoreload and + the compare values is done immediately or after the end of current + period. + (++) Input1Source: Source selected for input1 (GPIO or comparator output). + (++) Input2Source: Source selected for input2 (GPIO or comparator output). + Input2 is used only for encoder feature so is used only for LPTIM1 instance. + + (#)Six modes are available: + + (++) PWM Mode: To generate a PWM signal with specified period and pulse, + call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption + mode. + + (++) One Pulse Mode: To generate pulse with specified width in response + to a stimulus, call HAL_LPTIM_OnePulse_Start() or + HAL_LPTIM_OnePulse_Start_IT() for interruption mode. + + (++) Set once Mode: In this mode, the output changes the level (from + low level to high level if the output polarity is configured high, else + the opposite) when a compare match occurs. To start this mode, call + HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for + interruption mode. + + (++) Encoder Mode: To use the encoder interface call + HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for + interruption mode. Only available for LPTIM1 instance. + + (++) Time out Mode: an active edge on one selected trigger input rests + the counter. The first trigger event will start the timer, any + successive trigger event will reset the counter and the timer will + restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or + HAL_LPTIM_TimeOut_Start_IT() for interruption mode. + + (++) Counter Mode: counter can be used to count external events on + the LPTIM Input1 or it can be used to count internal clock cycles. + To start this mode, call HAL_LPTIM_Counter_Start() or + HAL_LPTIM_Counter_Start_IT() for interruption mode. + + + (#) User can stop any process by calling the corresponding API: + HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is + already started in interruption mode. + + (#) De-initialize the LPTIM peripheral using HAL_LPTIM_DeInit(). + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + [..] + Use Function HAL_LPTIM_RegisterCallback() to register a callback. + HAL_LPTIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + [..] + Use function HAL_LPTIM_UnRegisterCallback() to reset a callback to the + default weak function. + HAL_LPTIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + [..] + These functions allow to register/unregister following callbacks: + + (+) MspInitCallback : LPTIM Base Msp Init Callback. + (+) MspDeInitCallback : LPTIM Base Msp DeInit Callback. + (+) CompareMatchCallback : Compare match Callback. + (+) AutoReloadMatchCallback : Auto-reload match Callback. + (+) TriggerCallback : External trigger event detection Callback. + (+) CompareWriteCallback : Compare register write complete Callback. + (+) AutoReloadWriteCallback : Auto-reload register write complete Callback. + (+) DirectionUpCallback : Up-counting direction change Callback. + (+) DirectionDownCallback : Down-counting direction change Callback. + (+) UpdateEventCallback : Update event detection Callback. + (+) RepCounterWriteCallback : Repetition counter register write complete Callback. + + [..] + By default, after the Init and when the state is HAL_LPTIM_STATE_RESET + all interrupt callbacks are set to the corresponding weak functions: + examples HAL_LPTIM_TriggerCallback(), HAL_LPTIM_CompareMatchCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init/DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init/DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_LPTIM_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_LPTIM_STATE_READY or HAL_LPTIM_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_LPTIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup LPTIM LPTIM + * @brief LPTIM HAL module driver. + * @{ + */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + +#if defined (LPTIM1) || defined (LPTIM2) || defined (LPTIM3) || defined (LPTIM4) || defined (LPTIM5) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Constants + * @{ + */ +#define TIMEOUT 1000UL /* Timeout is 1s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Macros + * @{ + */ +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() :\ + ((__INSTANCE__) == LPTIM2) ? __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT() :\ + ((__INSTANCE__) == LPTIM3) ? __HAL_LPTIM_LPTIM3_EXTI_ENABLE_IT() :\ + ((__INSTANCE__) == LPTIM4) ? __HAL_LPTIM_LPTIM4_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM5_EXTI_ENABLE_IT()) + +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() :\ + ((__INSTANCE__) == LPTIM2) ? __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() :\ + ((__INSTANCE__) == LPTIM3) ? __HAL_LPTIM_LPTIM3_EXTI_DISABLE_IT() :\ + ((__INSTANCE__) == LPTIM4) ? __HAL_LPTIM_LPTIM4_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM5_EXTI_DISABLE_IT()) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static HAL_StatusTypeDef LPTIM_OC1_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig); +static HAL_StatusTypeDef LPTIM_OC2_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig); +static void LPTIM_IC1_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig); +static void LPTIM_IC2_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig); +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(const LPTIM_HandleTypeDef *hlptim, uint32_t flag); +void LPTIM_DMAError(DMA_HandleTypeDef *hdma); +void LPTIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void LPTIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void LPTIM_DMAUpdateEventCplt(DMA_HandleTypeDef *hdma); +void LPTIM_DMAUpdateEventHalfCplt(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef LPTIM_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t src, uint32_t dst, + uint32_t length); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions + * @{ + */ + +/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the LPTIM according to the specified parameters in the + LPTIM_InitTypeDef and initialize the associated handle. + (+) DeInitialize the LPTIM peripheral. + (+) Initialize the LPTIM MSP. + (+) DeInitialize the LPTIM MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the LPTIM according to the specified parameters in the + * LPTIM_InitTypeDef and initialize the associated handle. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) +{ + uint32_t tmpcfgr; + + /* Check the LPTIM handle allocation */ + if (hlptim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PERIOD(hlptim->Init.Period)); + + assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source)); + assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler)); + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); + } + assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source)); + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge)); + assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); + } + assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode)); + assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource)); + assert_param(IS_LPTIM_REPETITION(hlptim->Init.RepetitionCounter)); + + if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hlptim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + LPTIM_ResetCallback(hlptim); + + if (hlptim->MspInitCallback == NULL) + { + hlptim->MspInitCallback = HAL_LPTIM_MspInit; + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + hlptim->MspInitCallback(hlptim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_LPTIM_MspInit(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_REPOK); + + /* Set the repetition counter */ + __HAL_LPTIM_REPETITIONCOUNTER_SET(hlptim, hlptim->Init.RepetitionCounter); + + /* Wait for the completion of the write operation to the LPTIM_RCR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_REPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Set LPTIM Period */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, hlptim->Init.Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT)); + } + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL)); + } + + /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD | + LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE)); + + /* Set initialization parameters */ + tmpcfgr |= (hlptim->Init.Clock.Source | + hlptim->Init.Clock.Prescaler | + hlptim->Init.UpdateMode | + hlptim->Init.CounterSource); + + /* Glitch filters for internal triggers and external inputs are configured + * only if an internal clock source is provided to the LPTIM + */ + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) + { + tmpcfgr |= (hlptim->Init.Trigger.SampleTime | + hlptim->Init.UltraLowPowerClock.SampleTime); + } + + /* Configure LPTIM external clock polarity and digital filter */ + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity | + hlptim->Init.UltraLowPowerClock.SampleTime); + } + + /* Configure LPTIM external trigger */ + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Enable External trigger and set the trigger source */ + tmpcfgr |= (hlptim->Init.Trigger.Source | + hlptim->Init.Trigger.ActiveEdge | + hlptim->Init.Trigger.SampleTime); + } + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Configure LPTIM input sources */ + if ((hlptim->Instance == LPTIM1) || (hlptim->Instance == LPTIM2)) + { + /* Check LPTIM Input1 and Input2 sources */ + assert_param(IS_LPTIM_INPUT1_SOURCE(hlptim->Instance, hlptim->Init.Input1Source)); + assert_param(IS_LPTIM_INPUT2_SOURCE(hlptim->Instance, hlptim->Init.Input2Source)); + + /* Configure LPTIM Input1 and Input2 sources */ + hlptim->Instance->CFGR2 = (hlptim->Init.Input1Source | hlptim->Init.Input2Source); + } + else + { + if (hlptim->Instance == LPTIM3) + { + /* Check LPTIM3 Input1 source */ + assert_param(IS_LPTIM_INPUT1_SOURCE(hlptim->Instance, hlptim->Init.Input1Source)); + + /* Configure LPTIM3 Input1 source */ + hlptim->Instance->CFGR2 = hlptim->Init.Input1Source; + } + } + + /* Initialize the LPTIM channels state */ + LPTIM_CHANNEL_STATE_SET_ALL(hlptim, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the LPTIM peripheral. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the LPTIM handle allocation */ + if (hlptim == NULL) + { + return HAL_ERROR; + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + __HAL_LPTIM_ENABLE(hlptim); + if (IS_LPTIM_CC2_INSTANCE(hlptim->Instance)) + { + hlptim->Instance->CCMR1 = 0; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP1OK); + + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_1, 0); + /* Wait for the completion of the write operation to the LPTIM_CCR1 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP1OK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + if (IS_LPTIM_CC2_INSTANCE(hlptim->Instance)) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP2OK); + + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_2, 0); + /* Wait for the completion of the write operation to the LPTIM_CCR2 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP2OK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + __HAL_LPTIM_AUTORELOAD_SET(hlptim, 0); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the LPTIM Peripheral Clock */ + __HAL_LPTIM_DISABLE(hlptim); + + hlptim->Instance->CFGR = 0; + hlptim->Instance->CFGR2 = 0; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + if (hlptim->MspDeInitCallback == NULL) + { + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hlptim->MspDeInitCallback(hlptim); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_LPTIM_MspDeInit(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + /* Change the LPTIM channels state */ + LPTIM_CHANNEL_STATE_SET_ALL(hlptim, HAL_LPTIM_CHANNEL_STATE_RESET); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hlptim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the LPTIM MSP. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize LPTIM MSP. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions + * @brief Start-Stop operation functions. + * +@verbatim + ============================================================================== + ##### LPTIM Start Stop operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start the PWM mode. + (+) Stop the PWM mode. + (+) Start the One pulse mode. + (+) Stop the One pulse mode. + (+) Start the Set once mode. + (+) Stop the Set once mode. + (+) Start the Encoder mode. + (+) Stop the Encoder mode. + (+) Start the Timeout mode. + (+) Stop the Timeout mode. + (+) Start the Counter mode. + (+) Stop the Counter mode. + + +@endverbatim + * @{ + */ + +/** + * @brief Start the LPTIM PWM generation. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Reset WAVE bit to set PWM mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM PWM generation. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal from the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM PWM generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Reset WAVE bit to set PWM mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + case LPTIM_CHANNEL_2: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM PWM generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal from the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + case LPTIM_CHANNEL_2: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Enable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM PWM generation in DMA mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @param pData The destination Buffer address + * @param Length The length of data to be transferred from LPTIM peripheral to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Start_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel, const uint32_t *pData, + uint32_t Length) +{ + DMA_HandleTypeDef *hdma; + + /* Check the parameters */ + assert_param(IS_LPTIM_DMA_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Reset WAVE bit to set PWM mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Enable update event DMA request */ + __HAL_LPTIM_ENABLE_DMA(hlptim, LPTIM_DMA_UPDATE); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Set the DMA update event callbacks */ + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferCpltCallback = LPTIM_DMAUpdateEventCplt; + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferHalfCpltCallback = LPTIM_DMAUpdateEventHalfCplt; + + /* Set the DMA error callback */ + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferErrorCallback = LPTIM_DMAError; + + /* Enable the DMA Channel */ + hdma = hlptim->hdma[LPTIM_DMA_ID_CC1]; + if (LPTIM_DMA_Start_IT(hdma, (uint32_t)pData, (uint32_t)&hlptim->Instance->CCR1, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + case LPTIM_CHANNEL_2: + /* Set the DMA update event callbacks */ + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferCpltCallback = LPTIM_DMAUpdateEventCplt; + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferHalfCpltCallback = LPTIM_DMAUpdateEventHalfCplt; + + /* Set the DMA error callback */ + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferErrorCallback = LPTIM_DMAError; + + /* Enable the DMA Channel */ + hdma = hlptim->hdma[LPTIM_DMA_ID_CC2]; + if (LPTIM_DMA_Start_IT(hdma, (uint32_t)pData, (uint32_t)&hlptim->Instance->CCR2, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + default: + break; + } + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM PWM generation in DMA mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_DMA_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable update event DMA request */ + __HAL_LPTIM_DISABLE_DMA(hlptim, LPTIM_DMA_UPDATE); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable update event DMA request */ + (void)HAL_DMA_Abort_IT(hlptim->hdma[LPTIM_DMA_ID_CC1]); + break; + case LPTIM_CHANNEL_2: + /* Disable update event DMA request */ + (void)HAL_DMA_Abort_IT(hlptim->hdma[LPTIM_DMA_ID_CC2]); + break; + default: + break; + } + + /* Disable LPTIM signal from the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM One pulse generation. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Reset WAVE bit to set one pulse mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM One pulse generation. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM One pulse generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Reset WAVE bit to set one pulse mode */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + case LPTIM_CHANNEL_2: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM One pulse generation in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + case LPTIM_CHANNEL_2: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | + LPTIM_IT_UPDATE); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + /* Enable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM in Set once mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Set WAVE bit to enable the set once mode */ + hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM Set once mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the LPTIM Set once mode in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Set WAVE bit to enable the set once mode */ + hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_UPDATE); + break; + case LPTIM_CHANNEL_2: + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_UPDATE); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + /* Enable external trigger interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Enable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Start timer in single (one shot) mode */ + __HAL_LPTIM_START_SINGLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the LPTIM Set once mode in interrupt mode. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable LPTIM signal on the corresponding output pin */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP1OK | LPTIM_IT_CC1 | LPTIM_IT_ARROK | LPTIM_IT_ARRM); + break; + case LPTIM_CHANNEL_2: + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMP2OK | LPTIM_IT_CC2 | LPTIM_IT_ARROK | LPTIM_IT_ARRM); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* If external trigger source is used, then enable external trigger interrupt */ + if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + { + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + /* Enable external trigger interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Encoder interface. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim) +{ + uint32_t tmpcfgr; + + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); + assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + /* Clear CKPOL bits */ + tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); + + /* Set Input polarity */ + tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Set ENC bit to enable the encoder interface */ + hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Encoder interface. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Reset ENC bit to disable the encoder interface */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Encoder interface in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim) +{ + uint32_t tmpcfgr; + + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC); + assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1); + assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Configure edge sensitivity for encoder mode */ + /* Get the LPTIMx CFGR value */ + tmpcfgr = hlptim->Instance->CFGR; + + /* Clear CKPOL bits */ + tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL); + + /* Set Input polarity */ + tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity; + + /* Write to LPTIMx CFGR */ + hlptim->Instance->CFGR = tmpcfgr; + + /* Set ENC bit to enable the encoder interface */ + hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Enable "switch to up/down direction" interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP | LPTIM_IT_DOWN); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Encoder interface in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_ENCODER_INTERFACE_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Reset ENC bit to disable the encoder interface */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Disable "switch to down/up direction" interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP | LPTIM_IT_DOWN); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Timeout function. + * @note The first trigger event will start the timer, any successive + * trigger event will reset the counter and the timer restarts. + * @param hlptim LPTIM handle + * @param Timeout Specifies the TimeOut value to reset the counter. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PULSE(Timeout)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP1OK); + + /* Load the Timeout value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_1, Timeout); + + /* Wait for the completion of the write operation to the LPTIM_CCR1 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP1OK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Timeout function. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Reset TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Timeout function in interrupt mode. + * @note The first trigger event will start the timer, any successive + * trigger event will reset the counter and the timer restarts. + * @param hlptim LPTIM handle + * @param Timeout Specifies the TimeOut value to reset the counter. + * This parameter must be a value between 0x0000 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_PULSE(Timeout)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + + /* Set TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Enable Compare match CH1 interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CC1); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP1OK); + + /* Load the Timeout value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_1, Timeout); + + /* Wait for the completion of the write operation to the LPTIM_CCR1 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP1OK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Timeout function in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Reset TIMOUT bit to enable the timeout function */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Disable Compare match CH1 interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CC1); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Counter mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) + && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + /* Check if clock is prescaled */ + assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); + /* Set clock prescaler to 0 */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Counter mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Start the Counter mode in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + + /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) + && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + { + /* Check if clock is prescaled */ + assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); + /* Set clock prescaler to 0 */ + hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Enable interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | LPTIM_IT_UPDATE); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stop the Counter mode in interrupt mode. + * @param hlptim LPTIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DIEROK); + + /* Disable interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK | LPTIM_IT_ARRM | LPTIM_IT_REPOK | LPTIM_IT_UPDATE); + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the LPTIM Input Capture measurement. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INPUT_CAPTURE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Enable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the LPTIM Input Capture measurement. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Stop(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INPUT_CAPTURE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Disable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the LPTIM Input Capture measurement in interrupt mode. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INPUT_CAPTURE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Enable Capture/Compare 1 interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CC1); + break; + case LPTIM_CHANNEL_2: + /* Disable Capture/Compare 2 interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CC2); + break; + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Enable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the LPTIM Input Capture measurement in interrupt mode. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Stop_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INPUT_CAPTURE_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable Capture/Compare 1 interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CC1); + break; + case LPTIM_CHANNEL_2: + /* Disable Capture/Compare 2 interrupt */ + __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CC2); + break; + default: + return HAL_ERROR; + break; + } + /* Disable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the LPTIM Input Capture measurement in DMA mode. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be enabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @param pData The destination Buffer address + * @param Length The length of data to be transferred from LPTIM peripheral to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Start_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel, uint32_t *pData, + uint32_t Length) +{ + DMA_HandleTypeDef *hdma; + + /* Check the parameters */ + assert_param(IS_LPTIM_DMA_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + + /* Check LPTIM channel state */ + if (LPTIM_CHANNEL_STATE_GET(hlptim, Channel) != HAL_LPTIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_BUSY); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Set the DMA capture callbacks */ + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferCpltCallback = LPTIM_DMACaptureCplt; + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferHalfCpltCallback = LPTIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + hlptim->hdma[LPTIM_DMA_ID_CC1]->XferErrorCallback = LPTIM_DMAError; + + /* Enable the DMA Channel */ + hdma = hlptim->hdma[LPTIM_DMA_ID_CC1]; + if (LPTIM_DMA_Start_IT(hdma, (uint32_t)&hlptim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable Capture/Compare 1 DMA request */ + __HAL_LPTIM_ENABLE_DMA(hlptim, LPTIM_DMA_CC1); + break; + + case LPTIM_CHANNEL_2: + /* Set the DMA capture callbacks */ + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferCpltCallback = LPTIM_DMACaptureCplt; + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferHalfCpltCallback = LPTIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + hlptim->hdma[LPTIM_DMA_ID_CC2]->XferErrorCallback = LPTIM_DMAError; + + /* Enable the DMA Channel */ + hdma = hlptim->hdma[LPTIM_DMA_ID_CC2]; + if (LPTIM_DMA_Start_IT(hdma, (uint32_t)&hlptim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable Capture/Compare 2 DMA request */ + __HAL_LPTIM_ENABLE_DMA(hlptim, LPTIM_DMA_CC2); + break; + + default: + break; + } + + /* Wait for the completion of the write operation to the LPTIM_DIER register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_DIEROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Start timer in continuous mode */ + __HAL_LPTIM_START_CONTINUOUS(hlptim); + + /* Enable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_ENABLE(hlptim, Channel); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the LPTIM Input Capture measurement in DMA mode. + * @param hlptim LPTIM Input Capture handle + * @param Channel LPTIM Channels to be disabled + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: TIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_Stop_DMA(LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_DMA_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_BUSY; + + switch (Channel) + { + case LPTIM_CHANNEL_1: + /* Disable Capture/Compare 1 DMA request */ + __HAL_LPTIM_DISABLE_DMA(hlptim, LPTIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(hlptim->hdma[LPTIM_DMA_ID_CC1]); + break; + + case LPTIM_CHANNEL_2: + /* Disable Capture/Compare 2 DMA request */ + __HAL_LPTIM_DISABLE_DMA(hlptim, LPTIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(hlptim->hdma[LPTIM_DMA_ID_CC2]); + break; + default: + return HAL_ERROR; + break; + } + + /* Disable capture */ + __HAL_LPTIM_CAPTURE_COMPARE_DISABLE(hlptim, Channel); + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Set the LPTIM channel state */ + LPTIM_CHANNEL_STATE_SET(hlptim, Channel, HAL_LPTIM_CHANNEL_STATE_READY); + + /* Set the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions + * @brief Read operation functions. + * +@verbatim + ============================================================================== + ##### LPTIM Read operation functions ##### + ============================================================================== +[..] This section provides LPTIM Reading functions. + (+) Read the counter value. + (+) Read the period (Auto-reload) value. + (+) Read the pulse (Compare)value. +@endverbatim + * @{ + */ + +/** + * @brief Return the current counter value. + * @param hlptim LPTIM handle + * @retval Counter value. + */ +uint32_t HAL_LPTIM_ReadCounter(const LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + return (hlptim->Instance->CNT); +} + +/** + * @brief Return the current Autoreload (Period) value. + * @param hlptim LPTIM handle + * @retval Autoreload value. + */ +uint32_t HAL_LPTIM_ReadAutoReload(const LPTIM_HandleTypeDef *hlptim) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(hlptim->Instance)); + + return (hlptim->Instance->ARR); +} + +/** + * @brief Return the current Compare (Pulse) value. + * @param hlptim LPTIM handle + * @param Channel LPTIM Channel to be selected + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval Compare value. + */ +uint32_t HAL_LPTIM_ReadCapturedValue(const LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + uint32_t tmpccr; + + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + + switch (Channel) + { + case LPTIM_CHANNEL_1: + tmpccr = hlptim->Instance->CCR1; + break; + case LPTIM_CHANNEL_2: + tmpccr = hlptim->Instance->CCR2; + break; + default: + tmpccr = 0; + break; + } + return tmpccr; +} + +/** + * @brief LPTimer Input Capture Get Offset(in counter step unit) + * @note The real capture value corresponding to the input capture trigger can be calculated using + * the formula hereafter : Real capture value = captured(LPTIM_CCRx) - offset + * The Offset value is depending on the glitch filter value for the channel + * and the value of the prescaler for the kernel clock. + * Please check Errata Sheet V1_8 for more details under "variable latency + * on input capture channel" section. + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param Channel This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @retval The offset value + */ +uint8_t HAL_LPTIM_IC_GetOffset(const LPTIM_HandleTypeDef *hlptim, uint32_t Channel) +{ + + uint8_t offset ; + uint32_t prescaler; + uint32_t filter ; + + /* Get prescaler value */ + prescaler = LL_LPTIM_GetPrescaler(hlptim->Instance); + + /* Get filter value */ + filter = LL_LPTIM_IC_GetFilter(hlptim->Instance, Channel); + + /* Get offset value */ + offset = LL_LPTIM_IC_GET_OFFSET(prescaler, filter); + + /* return offset value */ + return offset; +} + +/** + * @} + */ +/** @defgroup LPTIM_Exported_Functions_Group5 LPTIM Config function + * @brief Config channel + * +@verbatim + ============================================================================== + ##### LPTIM Config function ##### + ============================================================================== +[..] This section provides LPTIM Config function. + (+) Configure channel: Output Compare mode, Period, Polarity. +@endverbatim + * @{ + */ + +/** + * @brief + * @param hlptim LPTIM handle + * @param sConfig The output configuration structure + * @param Channel LPTIM Channel to be configured + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @note Successive calls to HAL_LPTIM_OC_ConfigChannel can only be performed + * after a delay that must be greater or equal than the value of + * (PRESC x 3) kernel clock cycles, PRESC[2:0] being the clock decimal + * division factor (1, 2, 4, ..., 128). Any successive call violating + * this delay, leads to unpredictable results. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_OC_ConfigChannel(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status; + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + assert_param(IS_LPTIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_LPTIM_PULSE(sConfig->Pulse)); + + hlptim->State = HAL_LPTIM_STATE_BUSY; + + switch (Channel) + { + case LPTIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_LPTIM_CC1_INSTANCE(hlptim->Instance)); + + /* Configure the LPTIM Channel 1 in Output Compare */ + status = LPTIM_OC1_SetConfig(hlptim, sConfig); + if (status != HAL_OK) + { + return status; + } + break; + } + case LPTIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_LPTIM_CC2_INSTANCE(hlptim->Instance)); + + /* Configure the LPTIM Channel 2 in Output Compare */ + status = LPTIM_OC2_SetConfig(hlptim, sConfig); + if (status != HAL_OK) + { + return status; + } + break; + } + default: + break; + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief + * @param hlptim LPTIM handle + * @param sConfig The input configuration structure + * @param Channel LPTIM Channel to be configured + * This parameter can be one of the following values: + * @arg LPTIM_CHANNEL_1: LPTIM Channel 1 selected + * @arg LPTIM_CHANNEL_2: LPTIM Channel 2 selected + * @note Successive calls to HAL_LPTIM_IC_ConfigChannel can only be performed + * after a delay that must be greater or equal than the value of + * (PRESC x 3) kernel clock cycles, PRESC[2:0] being the clock decimal + * division factor (1, 2, 4, ..., 128). Any successive call violating + * this delay, leads to unpredictable results. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LPTIM_IC_ConfigChannel(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig, + uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_LPTIM_CCX_INSTANCE(hlptim->Instance, Channel)); + assert_param(IS_LPTIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_LPTIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_LPTIM_IC_FILTER(sConfig->ICFilter)); + + hlptim->State = HAL_LPTIM_STATE_BUSY; + + switch (Channel) + { + case LPTIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_LPTIM_CC1_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_IC1_SOURCE(hlptim->Instance, sConfig->ICInputSource)); + + /* Configure the LPTIM Channel 1 in Input Capture */ + LPTIM_IC1_SetConfig(hlptim, sConfig); + break; + } + case LPTIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_LPTIM_CC2_INSTANCE(hlptim->Instance)); + assert_param(IS_LPTIM_IC2_SOURCE(hlptim->Instance, sConfig->ICInputSource)); + + /* Configure the LPTIM Channel 2 in Input Capture */ + LPTIM_IC2_SetConfig(hlptim, sConfig); + break; + } + default: + break; + } + + /* Change the LPTIM state */ + hlptim->State = HAL_LPTIM_STATE_READY; + /* Return function status */ + return HAL_OK; +} +/** + * @} + */ + +/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks + * @brief LPTIM IRQ handler. + * +@verbatim + ============================================================================== + ##### LPTIM IRQ handler and callbacks ##### + ============================================================================== +[..] This section provides LPTIM IRQ handler and callback functions called within + the IRQ handler: + (+) LPTIM interrupt request handler + (+) Compare match Callback + (+) Auto-reload match Callback + (+) External trigger event detection Callback + (+) Compare register write complete Callback + (+) Auto-reload register write complete Callback + (+) Up-counting direction change Callback + (+) Down-counting direction change Callback + +@endverbatim + * @{ + */ + +/** + * @brief Handle LPTIM interrupt request. + * @param hlptim LPTIM handle + * @retval None + */ +void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim) +{ + /* Capture Compare 1 interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CC1) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CC1) != RESET) + { + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CC1); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((hlptim->Instance->CCMR1 & LPTIM_CCMR1_CC1SEL) != 0x00U) + { +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_CaptureCallback(hlptim); +#else + HAL_LPTIM_IC_CaptureCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareMatchCallback(hlptim); +#else + HAL_LPTIM_CompareMatchCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; + } + } + + /* Capture Compare 2 interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CC2) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CC2) != RESET) + { + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CC2); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + + /* Input capture event */ + if ((hlptim->Instance->CCMR1 & LPTIM_CCMR1_CC2SEL) != 0x00U) + { +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_CaptureCallback(hlptim); +#else + HAL_LPTIM_IC_CaptureCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareMatchCallback(hlptim); +#else + HAL_LPTIM_CompareMatchCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; + } + } + + /* Over Capture 1 interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CC1O) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CC1O) != RESET) + { + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CC1O); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + + /* Over capture event */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_OverCaptureCallback(hlptim); +#else + HAL_LPTIM_IC_OverCaptureCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; + } + } + + /* Over Capture 2 interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CC2O) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CC2O) != RESET) + { + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CC2O); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + + /* Over capture event */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_OverCaptureCallback(hlptim); +#else + HAL_LPTIM_IC_OverCaptureCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; + } + } + + /* Autoreload match interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) != RESET) + { + /* Clear Autoreload match flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM); + + /* Autoreload match Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->AutoReloadMatchCallback(hlptim); +#else + HAL_LPTIM_AutoReloadMatchCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Trigger detected interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) != RESET) + { + /* Clear Trigger detected flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG); + + /* Trigger detected callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->TriggerCallback(hlptim); +#else + HAL_LPTIM_TriggerCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Compare write interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMP1OK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMP1OK) != RESET) + { + /* Clear Compare write flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP1OK); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + /* Compare write Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareWriteCallback(hlptim); +#else + HAL_LPTIM_CompareWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Compare write interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMP2OK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMP2OK) != RESET) + { + /* Clear Compare write flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP2OK); + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + /* Compare write Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->CompareWriteCallback(hlptim); +#else + HAL_LPTIM_CompareWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Autoreload write interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) != RESET) + { + /* Clear Autoreload write flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Autoreload write Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->AutoReloadWriteCallback(hlptim); +#else + HAL_LPTIM_AutoReloadWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Direction counter changed from Down to Up interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) != RESET) + { + /* Clear Direction counter changed from Down to Up flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP); + + /* Direction counter changed from Down to Up Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->DirectionUpCallback(hlptim); +#else + HAL_LPTIM_DirectionUpCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Direction counter changed from Up to Down interrupt */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) != RESET) + { + /* Clear Direction counter changed from Up to Down flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN); + + /* Direction counter changed from Up to Down Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->DirectionDownCallback(hlptim); +#else + HAL_LPTIM_DirectionDownCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Repetition counter underflowed (or contains zero) and the LPTIM counter + overflowed */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UPDATE) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UPDATE) != RESET) + { + /* Clear update event flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UPDATE); + + /* Update event Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->UpdateEventCallback(hlptim); +#else + HAL_LPTIM_UpdateEventCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } + + /* Successful APB bus write to repetition counter register */ + if (__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_REPOK) != RESET) + { + if (__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_REPOK) != RESET) + { + /* Clear successful APB bus write to repetition counter flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_REPOK); + + /* Successful APB bus write to repetition counter Callback */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->RepCounterWriteCallback(hlptim); +#else + HAL_LPTIM_RepCounterWriteCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Compare match callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_CompareMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Autoreload match callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Trigger detected callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Compare write callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_CompareWriteCallback could be implemented in the user file + */ +} + +/** + * @brief Autoreload write callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file + */ +} + +/** + * @brief Direction counter changed from Down to Up callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_DirectionUpCallback could be implemented in the user file + */ +} + +/** + * @brief Direction counter changed from Up to Down callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_DirectionDownCallback could be implemented in the user file + */ +} + +/** + * @brief Repetition counter underflowed (or contains zero) and LPTIM counter overflowed callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_UpdateEventCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_UpdateEventCallback could be implemented in the user file + */ +} + +/** + * @brief Successful APB bus write to repetition counter register callback in non-blocking mode. + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_RepCounterWriteCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_RepCounterWriteCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_IC_CaptureCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Over Capture callback in non-blocking mode + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_IC_OverCaptureCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_IC_OverCaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param hlptim LPTIM IC handle + * @retval None + */ +__weak void HAL_LPTIM_IC_CaptureHalfCpltCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Update event half complete callback in non-blocking mode + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_UpdateEventHalfCpltCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_UpdateEventHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback in non-blocking mode + * @param hlptim LPTIM handle + * @retval None + */ +__weak void HAL_LPTIM_ErrorCallback(LPTIM_HandleTypeDef *hlptim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlptim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LPTIM_ErrorCallback could be implemented in the user file + */ +} + + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User LPTIM callback to be used instead of the weak predefined callback + * @param hlptim LPTIM handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID + * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID + * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID + * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID + * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID + * @arg @ref HAL_LPTIM_UPDATE_EVENT_CB_ID Update event detection Callback ID + * @arg @ref HAL_LPTIM_REP_COUNTER_WRITE_CB_ID Repetition counter register write complete Callback ID + * @arg @ref HAL_LPTIM_UPDATE_EVENT_HALF_CB_ID Update event Half detection Callback ID + * @arg @ref HAL_LPTIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LPTIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_LPTIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_LPTIM_OVER_CAPTURE_CB_ID Over Capture Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID, + pLPTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (hlptim->State == HAL_LPTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = pCallback; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = pCallback; + break; + + case HAL_LPTIM_COMPARE_MATCH_CB_ID : + hlptim->CompareMatchCallback = pCallback; + break; + + case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : + hlptim->AutoReloadMatchCallback = pCallback; + break; + + case HAL_LPTIM_TRIGGER_CB_ID : + hlptim->TriggerCallback = pCallback; + break; + + case HAL_LPTIM_COMPARE_WRITE_CB_ID : + hlptim->CompareWriteCallback = pCallback; + break; + + case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : + hlptim->AutoReloadWriteCallback = pCallback; + break; + + case HAL_LPTIM_DIRECTION_UP_CB_ID : + hlptim->DirectionUpCallback = pCallback; + break; + + case HAL_LPTIM_DIRECTION_DOWN_CB_ID : + hlptim->DirectionDownCallback = pCallback; + break; + + case HAL_LPTIM_UPDATE_EVENT_CB_ID : + hlptim->UpdateEventCallback = pCallback; + break; + + case HAL_LPTIM_REP_COUNTER_WRITE_CB_ID : + hlptim->RepCounterWriteCallback = pCallback; + break; + + case HAL_LPTIM_UPDATE_EVENT_HALF_CB_ID : + hlptim->UpdateEventHalfCpltCallback = pCallback; + break; + + case HAL_LPTIM_ERROR_CB_ID : + hlptim->ErrorCallback = pCallback; + break; + + case HAL_LPTIM_IC_CAPTURE_CB_ID : + hlptim->IC_CaptureCallback = pCallback; + break; + + case HAL_LPTIM_IC_CAPTURE_HALF_CB_ID : + hlptim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_LPTIM_OVER_CAPTURE_CB_ID : + hlptim->IC_OverCaptureCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + hlptim->MspInitCallback = pCallback; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + hlptim->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a LPTIM callback + * LLPTIM callback is redirected to the weak predefined callback + * @param hlptim LPTIM handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_LPTIM_MSPINIT_CB_ID LPTIM Base Msp Init Callback ID + * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID LPTIM Base Msp DeInit Callback ID + * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare match Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_MATCH_CB_ID Auto-reload match Callback ID + * @arg @ref HAL_LPTIM_TRIGGER_CB_ID External trigger event detection Callback ID + * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare register write complete Callback ID + * @arg @ref HAL_LPTIM_AUTORELOAD_WRITE_CB_ID Auto-reload register write complete Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Up-counting direction change Callback ID + * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Down-counting direction change Callback ID + * @arg @ref HAL_LPTIM_UPDATE_EVENT_CB_ID Update event detection Callback ID + * @arg @ref HAL_LPTIM_REP_COUNTER_WRITE_CB_ID Repetition counter register write complete Callback ID + * @arg @ref HAL_LPTIM_UPDATE_EVENT_HALF_CB_ID Update event Half detection Callback ID + * @arg @ref HAL_LPTIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LPTIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_LPTIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_LPTIM_OVER_CAPTURE_CB_ID Over Capture Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hlptim->State == HAL_LPTIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + /* Legacy weak MspInit Callback */ + hlptim->MspInitCallback = HAL_LPTIM_MspInit; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + /* Legacy weak Msp DeInit Callback */ + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; + break; + + case HAL_LPTIM_COMPARE_MATCH_CB_ID : + /* Legacy weak Compare match Callback */ + hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; + break; + + case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID : + /* Legacy weak Auto-reload match Callback */ + hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; + break; + + case HAL_LPTIM_TRIGGER_CB_ID : + /* Legacy weak External trigger event detection Callback */ + hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback; + break; + + case HAL_LPTIM_COMPARE_WRITE_CB_ID : + /* Legacy weak Compare register write complete Callback */ + hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; + break; + + case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID : + /* Legacy weak Auto-reload register write complete Callback */ + hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; + break; + + case HAL_LPTIM_DIRECTION_UP_CB_ID : + /* Legacy weak Up-counting direction change Callback */ + hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; + break; + + case HAL_LPTIM_DIRECTION_DOWN_CB_ID : + /* Legacy weak Down-counting direction change Callback */ + hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; + break; + + case HAL_LPTIM_UPDATE_EVENT_CB_ID : + /* Legacy weak Update event detection Callback */ + hlptim->UpdateEventCallback = HAL_LPTIM_UpdateEventCallback; + break; + + case HAL_LPTIM_REP_COUNTER_WRITE_CB_ID : + /* Legacy weak Repetition counter register write complete Callback */ + hlptim->RepCounterWriteCallback = HAL_LPTIM_RepCounterWriteCallback; + break; + + case HAL_LPTIM_UPDATE_EVENT_HALF_CB_ID : + /* Legacy weak Update event half complete detection Callback */ + hlptim->UpdateEventHalfCpltCallback = HAL_LPTIM_UpdateEventHalfCpltCallback; + break; + + case HAL_LPTIM_ERROR_CB_ID : + /* Legacy weak error Callback */ + hlptim->ErrorCallback = HAL_LPTIM_ErrorCallback; + break; + + case HAL_LPTIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + hlptim->IC_CaptureCallback = HAL_LPTIM_IC_CaptureCallback; + break; + + case HAL_LPTIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + hlptim->IC_CaptureHalfCpltCallback = HAL_LPTIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_LPTIM_OVER_CAPTURE_CB_ID : + /* Legacy weak IC over capture Callback */ + hlptim->IC_OverCaptureCallback = HAL_LPTIM_IC_OverCaptureCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hlptim->State == HAL_LPTIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LPTIM_MSPINIT_CB_ID : + /* Legacy weak MspInit Callback */ + hlptim->MspInitCallback = HAL_LPTIM_MspInit; + break; + + case HAL_LPTIM_MSPDEINIT_CB_ID : + /* Legacy weak Msp DeInit Callback */ + hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup LPTIM_Group5 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the LPTIM handle state. + * @param hlptim LPTIM handle + * @retval HAL state + */ +HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(const LPTIM_HandleTypeDef *hlptim) +{ + /* Return LPTIM handle state */ + return hlptim->State; +} + +/** + * @} + */ + + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup LPTIM_Private_Functions LPTIM Private Functions + * @{ + */ +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param lptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @retval None + */ +static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim) +{ + /* Reset the LPTIM callback to the legacy weak callbacks */ + lptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; + lptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; + lptim->TriggerCallback = HAL_LPTIM_TriggerCallback; + lptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; + lptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; + lptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; + lptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; + lptim->UpdateEventCallback = HAL_LPTIM_UpdateEventCallback; + lptim->RepCounterWriteCallback = HAL_LPTIM_RepCounterWriteCallback; + lptim->UpdateEventHalfCpltCallback = HAL_LPTIM_UpdateEventHalfCpltCallback; + lptim->IC_CaptureCallback = HAL_LPTIM_IC_CaptureCallback; + lptim->IC_CaptureHalfCpltCallback = HAL_LPTIM_IC_CaptureHalfCpltCallback; + lptim->IC_OverCaptureCallback = HAL_LPTIM_IC_OverCaptureCallback; + lptim->ErrorCallback = HAL_LPTIM_ErrorCallback; +} +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + +/** + * @brief LPTimer Wait for flag set + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param flag The lptim flag + * @retval HAL status + */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(const LPTIM_HandleTypeDef *hlptim, uint32_t flag) +{ + HAL_StatusTypeDef result = HAL_OK; + uint32_t count = TIMEOUT * (SystemCoreClock / 20UL / 1000UL); + do + { + count--; + if (count == 0UL) + { + result = HAL_TIMEOUT; + } + } while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); + + return result; +} + +/** + * @brief LPTIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void LPTIM_DMAError(DMA_HandleTypeDef *hdma) +{ + LPTIM_HandleTypeDef *hlptim = (LPTIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hlptim->State = HAL_LPTIM_STATE_READY; + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->ErrorCallback(hlptim); +#else + HAL_LPTIM_ErrorCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +} + +/** + * @brief LPTIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void LPTIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + LPTIM_HandleTypeDef *hlptim = (LPTIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hlptim->State = HAL_LPTIM_STATE_READY; + + if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC1]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + } + else if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC2]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_CaptureCallback(hlptim); +#else + HAL_LPTIM_IC_CaptureCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief LPTIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void LPTIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + LPTIM_HandleTypeDef *hlptim = (LPTIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hlptim->State = HAL_LPTIM_STATE_READY; + + if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC1]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + } + else if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC2]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->IC_CaptureHalfCpltCallback(hlptim); +#else + HAL_LPTIM_IC_CaptureHalfCpltCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief LPTIM DMA Update event complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void LPTIM_DMAUpdateEventCplt(DMA_HandleTypeDef *hdma) +{ + LPTIM_HandleTypeDef *hlptim = (LPTIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hlptim->State = HAL_LPTIM_STATE_READY; + + if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC1]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + } + else if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC2]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->UpdateEventCallback(hlptim); +#else + HAL_LPTIM_UpdateEventCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief LPTIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void LPTIM_DMAUpdateEventHalfCplt(DMA_HandleTypeDef *hdma) +{ + LPTIM_HandleTypeDef *hlptim = (LPTIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hlptim->State = HAL_LPTIM_STATE_READY; + + if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC1]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_1; + } + else if (hdma == hlptim->hdma[LPTIM_DMA_ID_CC2]) + { + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_2; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) + hlptim->UpdateEventHalfCpltCallback(hlptim); +#else + HAL_LPTIM_UpdateEventHalfCpltCallback(hlptim); +#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ + + hlptim->Channel = HAL_LPTIM_ACTIVE_CHANNEL_CLEARED; +} +/** + * @brief LPTimer Output Compare 1 configuration + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param sConfig The output configuration structure + * @retval None + */ +static HAL_StatusTypeDef LPTIM_OC1_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig) +{ + uint32_t tmpccmr1; + uint32_t tmpcfgr; + + tmpccmr1 = hlptim->Instance->CCMR1; + tmpccmr1 &= ~(LPTIM_CCMR1_CC1P_Msk | LPTIM_CCMR1_CC1SEL_Msk); + + if ((hlptim->Instance == LPTIM4) || (hlptim->Instance == LPTIM5)) + { + tmpcfgr = hlptim->Instance->CFGR; + tmpcfgr &= ~LPTIM_CFGR_WAVPOL_Msk; + tmpcfgr |= sConfig->OCPolarity << LPTIM_CFGR_WAVPOL_Pos; + + /* Write to CFGR register */ + hlptim->Instance->CFGR = tmpcfgr; + } + else + { + tmpccmr1 |= sConfig->OCPolarity << LPTIM_CCMR1_CC1P_Pos; + } + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP1OK); + + /* Write to CCR1 register */ + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_1, sConfig->Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CCR1 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP1OK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Write to CCMR1 register */ + hlptim->Instance->CCMR1 = tmpccmr1; + + return HAL_OK; +} + +/** + * @brief LPTimer Output Compare 2 configuration + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param sConfig The output configuration structure + * @retval None + */ +static HAL_StatusTypeDef LPTIM_OC2_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_OC_ConfigTypeDef *sConfig) +{ + uint32_t tmpccmr1; + + tmpccmr1 = hlptim->Instance->CCMR1; + tmpccmr1 &= ~(LPTIM_CCMR1_CC2P_Msk | LPTIM_CCMR1_CC2SEL_Msk); + tmpccmr1 |= sConfig->OCPolarity << LPTIM_CCMR1_CC2P_Pos; + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMP2OK); + + /* Write to CCR2 register */ + __HAL_LPTIM_COMPARE_SET(hlptim, LPTIM_CHANNEL_2, sConfig->Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CCR2 register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMP2OK) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + /* Write to CCMR1 register */ + hlptim->Instance->CCMR1 = tmpccmr1; + + return HAL_OK; +} + +/** + * @brief LPTimer Input Capture 1 configuration + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param sConfig The input configuration structure + * @retval None + */ +static void LPTIM_IC1_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig) +{ + uint32_t tmpccmr1; + uint32_t tmpcfgr2; + + tmpccmr1 = hlptim->Instance->CCMR1; + tmpccmr1 &= ~(LPTIM_CCMR1_IC1PSC_Msk | LPTIM_CCMR1_CC1P_Msk | LPTIM_CCMR1_IC1F_Msk); + tmpccmr1 |= sConfig->ICPrescaler | + sConfig->ICPolarity | + sConfig->ICFilter | + LPTIM_CCMR1_CC1SEL; + + tmpcfgr2 = hlptim->Instance->CFGR2; + tmpcfgr2 &= ~(LPTIM_CFGR2_IC1SEL_Msk); + tmpcfgr2 |= sConfig->ICInputSource; + + /* Write to CCMR1 register */ + hlptim->Instance->CCMR1 = tmpccmr1; + + /* Write to CFGR2 register */ + hlptim->Instance->CFGR2 = tmpcfgr2; +} + +/** + * @brief LPTimer Input Capture 2 configuration + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param sConfig The input configuration structure + * @retval None + */ +static void LPTIM_IC2_SetConfig(LPTIM_HandleTypeDef *hlptim, const LPTIM_IC_ConfigTypeDef *sConfig) +{ + uint32_t tmpccmr1; + uint32_t tmpcfgr2; + + tmpccmr1 = hlptim->Instance->CCMR1; + tmpccmr1 &= ~(LPTIM_CCMR1_IC2PSC_Msk | LPTIM_CCMR1_CC2P_Msk | LPTIM_CCMR1_IC2F_Msk); + tmpccmr1 |= (sConfig->ICPrescaler << (LPTIM_CCMR1_IC2PSC_Pos - LPTIM_CCMR1_IC1PSC_Pos)) | + (sConfig->ICPolarity << (LPTIM_CCMR1_CC2P_Pos - LPTIM_CCMR1_CC1P_Pos)) | + (sConfig->ICFilter << (LPTIM_CCMR1_IC2F_Pos - LPTIM_CCMR1_IC1F_Pos)) | + LPTIM_CCMR1_CC2SEL; + + tmpcfgr2 = hlptim->Instance->CFGR2; + tmpcfgr2 &= ~(LPTIM_CFGR2_IC2SEL_Msk); + tmpcfgr2 |= sConfig->ICInputSource; + + /* Write to CCMR1 register */ + hlptim->Instance->CCMR1 = tmpccmr1; + + /* Write to CFGR2 register */ + hlptim->Instance->CFGR2 = tmpcfgr2; +} + +/** + * @brief Start the DMA data transfer. + * @param hdma DMA handle + * @param src The source memory Buffer address. + * @param dst The destination memory Buffer address. + * @param length The size of a source block transfer in byte. + * @retval HAL status + */ +HAL_StatusTypeDef LPTIM_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t src, uint32_t dst, + uint32_t length) +{ + HAL_StatusTypeDef status; + + /* Enable the DMA channel */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hdma->LinkedListQueue != 0U) && (hdma->LinkedListQueue->Head != 0U)) + { + /* Enable the DMA channel */ + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = length; + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)src; + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)dst; + + status = HAL_DMAEx_List_Start_IT(hdma); + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hdma, src, dst, length); + } + + return status; +} +/** + * @} + */ +#endif /* LPTIM1 || LPTIM2 || LPTIM3 || LPTIM4 || LPTIM5 */ + +#endif /* HAL_LPTIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc.c new file mode 100644 index 000000000..e68cb979f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc.c @@ -0,0 +1,2219 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ltdc.c + * @author MCD Application Team + * @brief LTDC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the LTDC peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LTDC HAL driver can be used as follows: + + (#) Declare a LTDC_HandleTypeDef handle structure, for example: LTDC_HandleTypeDef hltdc; + + (#) Initialize the LTDC low level resources by implementing the HAL_LTDC_MspInit() API: + (##) Enable the LTDC interface clock + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the LTDC interrupt priority + (+++) Enable the NVIC LTDC IRQ Channel + + (#) Initialize the required configuration through the following parameters: + the LTDC timing, the horizontal and vertical polarity, the pixel clock polarity, + Data Enable polarity and the LTDC background color value using HAL_LTDC_Init() function + + *** Configuration *** + ========================= + [..] + (#) Program the required configuration through the following parameters: + the pixel format, the blending factors, input alpha value, the window size + and the image size using HAL_LTDC_ConfigLayer() function for foreground + or/and background layer. + + (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and + HAL_LTDC_EnableCLUT functions. + + (#) Optionally, enable the Dither using HAL_LTDC_EnableDither(). + + (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying() + and HAL_LTDC_EnableColorKeying functions. + + (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent() + function + + (#) If needed, reconfigure and change the pixel format value, the alpha value + value, the window size, the window position and the layer start address + for foreground or/and background layer using respectively the following + functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(), + HAL_LTDC_SetWindowPosition() and HAL_LTDC_SetAddress(). + + (#) Variant functions with _NoReload suffix allows to set the LTDC configuration/settings without immediate reload. + This is useful in case when the program requires to modify serval LTDC settings (on one or both layers) + then applying(reload) these settings in one shot by calling the function HAL_LTDC_Reload(). + + After calling the _NoReload functions to set different color/format/layer settings, + the program shall call the function HAL_LTDC_Reload() to apply(reload) these settings. + Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_IMMEDIATE if + an immediate reload is required. + Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_VERTICAL_BLANKING if + the reload should be done in the next vertical blanking period, + this option allows to avoid display flicker by applying the new settings during the vertical blanking period. + + + (#) To control LTDC state you can use the following function: HAL_LTDC_GetState() + + *** LTDC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in LTDC HAL driver. + + (+) __HAL_LTDC_ENABLE: Enable the LTDC. + (+) __HAL_LTDC_DISABLE: Disable the LTDC. + (+) __HAL_LTDC_LAYER_ENABLE: Enable an LTDC Layer. + (+) __HAL_LTDC_LAYER_DISABLE: Disable an LTDC Layer. + (+) __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG: Reload Layer Configuration. + (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags. + (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags. + (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts. + (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts. + (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not. + + [..] + (@) You can refer to the LTDC HAL driver header file for more useful macros + + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_LTDC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function HAL_LTDC_RegisterCallback() to register a callback. + + [..] + Function HAL_LTDC_RegisterCallback() allows to register following callbacks: + (+) LineEventCallback : LTDC Line Event Callback. + (+) ReloadEventCallback : LTDC Reload Event Callback. + (+) ErrorCallback : LTDC Error Callback + (+) MspInitCallback : LTDC MspInit. + (+) MspDeInitCallback : LTDC MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_LTDC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_LTDC_UnRegisterCallback() takes as parameters the HAL peripheral handle + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) LineEventCallback : LTDC Line Event Callback + (+) ReloadEventCallback : LTDC Reload Event Callback + (+) ErrorCallback : LTDC Error Callback + (+) MspInitCallback : LTDC MspInit + (+) MspDeInitCallback : LTDC MspDeInit. + + [..] + By default, after the HAL_LTDC_Init and when the state is HAL_LTDC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_LTDC_LineEventCallback(), HAL_LTDC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak (surcharged) functions in the HAL_LTDC_Init() and HAL_LTDC_DeInit() + only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_LTDC_Init() and HAL_LTDC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_LTDC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_LTDC_STATE_READY or HAL_LTDC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_LTDC_RegisterCallback() before calling HAL_LTDC_DeInit() + or HAL_LTDC_Init() function. + + [..] + When the compilation define USE_HAL_LTDC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_LTDC_MODULE_ENABLED + +#if defined (LTDC) + +/** @defgroup LTDC LTDC + * @brief LTDC HAL module driver + * @{ + */ + + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup LTDC_Private_Define LTDC Private Define + * @{ + */ +#define LTDC_TIMEOUT_VALUE ((uint32_t)100U) /* 100ms */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup LTDC_Exported_Functions LTDC Exported Functions + * @{ + */ + +/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the LTDC + (+) De-initialize the LTDC + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the LTDC according to the specified parameters in the LTDC_InitTypeDef. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc) +{ + uint32_t tmp; + uint32_t tmp1; + + /* Check the LTDC peripheral state */ + if (hltdc == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); + assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync)); + assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync)); + assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP)); + assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP)); + assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH)); + assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW)); + assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh)); + assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth)); + assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity)); + assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity)); + assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity)); + assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity)); + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + if (hltdc->State == HAL_LTDC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hltdc->Lock = HAL_UNLOCKED; + + /* Reset the LTDC callback to the legacy weak callbacks */ + hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ + hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ + hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hltdc->MspInitCallback == NULL) + { + hltdc->MspInitCallback = HAL_LTDC_MspInit; + } + /* Init the low level hardware */ + hltdc->MspInitCallback(hltdc); + } +#else + if (hltdc->State == HAL_LTDC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hltdc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_LTDC_MspInit(hltdc); + } +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the HS, VS, DE and PC polarity */ + hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL); + hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \ + hltdc->Init.DEPolarity | hltdc->Init.PCPolarity); + + /* Set Synchronization size */ + hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW); + tmp = (hltdc->Init.HorizontalSync << 16U); + hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync); + + /* Set Accumulated Back porch */ + hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP); + tmp = (hltdc->Init.AccumulatedHBP << 16U); + hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP); + + /* Set Accumulated Active Width */ + hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW); + tmp = (hltdc->Init.AccumulatedActiveW << 16U); + hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH); + + /* Set Total Width */ + hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW); + tmp = (hltdc->Init.TotalWidth << 16U); + hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh); + + /* Set the background color value */ + tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8U); + tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16U); + hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED); + hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue); + + /* Enable the Transfer Error and FIFO underrun interrupts */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE | LTDC_IT_FU); + + /* Enable LTDC by setting LTDCEN bit */ + __HAL_LTDC_ENABLE(hltdc); + + /* Initialize the error code */ + hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-initialize the LTDC peripheral. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ + +HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc) +{ + uint32_t tickstart; + + /* Check the LTDC peripheral state */ + if (hltdc == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); + + /* Disable LTDC Layer 1 */ + __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_1); + +#if defined(LTDC_Layer2_BASE) + /* Disable LTDC Layer 2 */ + __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_2); +#endif /* LTDC_Layer2_BASE */ + + /* Reload during vertical blanking period */ + __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(hltdc); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for VSYNC Interrupt */ + while (READ_BIT(hltdc->Instance->CDSR, LTDC_CDSR_VSYNCS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > LTDC_TIMEOUT_VALUE) + { + break; + } + } + + /* Disable LTDC */ + __HAL_LTDC_DISABLE(hltdc); + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + if (hltdc->MspDeInitCallback == NULL) + { + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; + } + /* DeInit the low level hardware */ + hltdc->MspDeInitCallback(hltdc); +#else + /* DeInit the low level hardware */ + HAL_LTDC_MspDeInit(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + /* Initialize the error code */ + hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Initialize the LTDC MSP. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-initialize the LTDC MSP. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User LTDC Callback + * To be used instead of the weak predefined callback + * @param hltdc ltdc handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID + * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID + * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, + pLTDC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hltdc); + + if (hltdc->State == HAL_LTDC_STATE_READY) + { + switch (CallbackID) + { + case HAL_LTDC_LINE_EVENT_CB_ID : + hltdc->LineEventCallback = pCallback; + break; + + case HAL_LTDC_RELOAD_EVENT_CB_ID : + hltdc->ReloadEventCallback = pCallback; + break; + + case HAL_LTDC_ERROR_CB_ID : + hltdc->ErrorCallback = pCallback; + break; + + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = pCallback; + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hltdc->State == HAL_LTDC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = pCallback; + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return status; +} + +/** + * @brief Unregister an LTDC Callback + * LTDC callback is redirected to the weak predefined callback + * @param hltdc ltdc handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID + * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID + * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hltdc); + + if (hltdc->State == HAL_LTDC_STATE_READY) + { + switch (CallbackID) + { + case HAL_LTDC_LINE_EVENT_CB_ID : + hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ + break; + + case HAL_LTDC_RELOAD_EVENT_CB_ID : + hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ + break; + + case HAL_LTDC_ERROR_CB_ID : + hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hltdc->State == HAL_LTDC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return status; +} +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides function allowing to: + (+) Handle LTDC interrupt request + +@endverbatim + * @{ + */ +/** + * @brief Handle LTDC interrupt request. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ +void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc) +{ + uint32_t isrflags = READ_REG(hltdc->Instance->ISR); + uint32_t itsources = READ_REG(hltdc->Instance->IER); + + /* Transfer Error Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_TERRIF) != 0U) && ((itsources & LTDC_IER_TERRIE) != 0U)) + { + /* Disable the transfer Error interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE); + + /* Clear the transfer error flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE); + + /* Update error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_TE; + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Transfer error Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + hltdc->ErrorCallback(hltdc); +#else + /* Call legacy error callback*/ + HAL_LTDC_ErrorCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* FIFO underrun Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_FUIF) != 0U) && ((itsources & LTDC_IER_FUIE) != 0U)) + { + /* Disable the FIFO underrun interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU); + + /* Clear the FIFO underrun flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU); + + /* Update error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_FU; + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Transfer error Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + hltdc->ErrorCallback(hltdc); +#else + /* Call legacy error callback*/ + HAL_LTDC_ErrorCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* Line Interrupt management ************************************************/ + if (((isrflags & LTDC_ISR_LIF) != 0U) && ((itsources & LTDC_IER_LIE) != 0U)) + { + /* Disable the Line interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); + + /* Clear the Line interrupt flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI); + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Line interrupt Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered Line Event callback */ + hltdc->LineEventCallback(hltdc); +#else + /*Call Legacy Line Event callback */ + HAL_LTDC_LineEventCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* Register reload Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_RRIF) != 0U) && ((itsources & LTDC_IER_RRIE) != 0U)) + { + /* Disable the register reload interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_RR); + + /* Clear the register reload flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_RR); + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Reload interrupt Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered reload Event callback */ + hltdc->ReloadEventCallback(hltdc); +#else + /*Call Legacy Reload Event callback */ + HAL_LTDC_ReloadEventCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Error LTDC callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Line Event callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_LineEventCallback could be implemented in the user file + */ +} + +/** + * @brief Reload Event callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_ReloadEvenCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the LTDC foreground or/and background parameters. + (+) Set the active layer. + (+) Configure the color keying. + (+) Configure the C-LUT. + (+) Enable / Disable the color keying. + (+) Enable / Disable the C-LUT. + (+) Update the layer position. + (+) Update the layer size. + (+) Update pixel format on the fly. + (+) Update transparency on the fly. + (+) Update address on the fly. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the LTDC Layer according to the specified + * parameters in the LTDC_InitTypeDef and create the associated handle. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains + * the configuration information for the Layer. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); + assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); + assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); + assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); + assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); + assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); + assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); + assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); + assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Copy new layer configuration into handle structure */ + hltdc->LayerCfg[LayerIdx] = *pLayerCfg; + + /* Configure the LTDC Layer */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Configure the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param RGBValue the color key value + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the default color values */ + LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); + LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Load the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pCLUT pointer to the color lookup table address. + * @param CLUTSize the color lookup table size. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, const uint32_t *pCLUT, uint32_t CLUTSize, + uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t counter; + const uint32_t *pcolorlut = pCLUT; + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + for (counter = 0U; (counter < CLUTSize); counter++) + { + if (hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44) + { + tmp = (((counter + (16U * counter)) << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ + ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); + } + else + { + tmp = ((counter << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ + ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); + } + + pcolorlut++; + + /* Specifies the C-LUT address and RGB value */ + LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp; + } + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable Dither. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc) +{ + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable Dither by setting DTEN bit */ + LTDC->GCR |= (uint32_t)LTDC_GCR_DEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable Dither. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc) +{ + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable Dither by setting DTEN bit */ + LTDC->GCR &= ~(uint32_t)LTDC_GCR_DEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window size. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param XSize LTDC Pixel per line + * @param YSize LTDC Line number + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters (Layers parameters)*/ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(XSize)); + assert_param(IS_LTDC_CFBLNBR(YSize)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal stop */ + pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; + + /* update vertical stop */ + pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; + + /* Reconfigures the color frame buffer pitch in byte */ + pLayerCfg->ImageWidth = XSize; + + /* Reconfigures the frame buffer line number */ + pLayerCfg->ImageHeight = YSize; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window position. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param X0 LTDC window X offset + * @param Y0 LTDC window Y offset + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(X0)); + assert_param(IS_LTDC_CFBLNBR(Y0)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal start/stop */ + pLayerCfg->WindowX0 = X0; + pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; + + /* update vertical start/stop */ + pLayerCfg->WindowY0 = Y0; + pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the pixel format. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Pixelformat new pixel format value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the pixel format */ + pLayerCfg->PixelFormat = Pixelformat; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the layer alpha value. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Alpha new alpha value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_ALPHA(Alpha)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Alpha value */ + pLayerCfg->Alpha = Alpha; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} +/** + * @brief Reconfigure the frame buffer Address. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Address new address value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Address */ + pLayerCfg->FBStartAdress = Address; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width + * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to + * layer for which we want to read and display on screen only a portion 320x240 taken in the center + * of the buffer. + * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by previous + * call to HAL_LTDC_ConfigLayer(). + * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default + * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. + * @param LayerIdx LTDC layer index concerned by the modification of line pitch. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t pitchUpdate; + uint32_t pixelFormat; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* get LayerIdx used pixel format */ + pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; + + if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + pitchUpdate = ((LinePitchInPixels * tmp) << 16U); + + /* Clear previously set standard pitch */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; + + /* Set the Reload type as immediate update of LTDC pitch configured above */ + LTDC->SRCR |= LTDC_SRCR_IMR; + + /* Set new line pitch value */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; + + /* Set the Reload type as immediate update of LTDC pitch configured above */ + LTDC->SRCR |= LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Define the position of the line interrupt. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Line Line Interrupt Position. + * @note User application may resort to HAL_LTDC_LineEventCallback() at line interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LIPOS(Line)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable the Line interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); + + /* Set the Line Interrupt position */ + LTDC->LIPCR = (uint32_t)Line; + + /* Enable the Line interrupt */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reload LTDC Layers configuration. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param ReloadType This parameter can be one of the following values : + * LTDC_RELOAD_IMMEDIATE : Immediate Reload + * LTDC_RELOAD_VERTICAL_BLANKING : Reload in the next Vertical Blanking + * @note User application may resort to HAL_LTDC_ReloadEventCallback() at reload interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType) +{ + /* Check the parameters */ + assert_param(IS_LTDC_RELOAD(ReloadType)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable the Reload interrupt */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_RR); + + /* Apply Reload type */ + hltdc->Instance->SRCR = ReloadType; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Configure the LTDC Layer according to the specified without reloading + * parameters in the LTDC_InitTypeDef and create the associated handle. + * Variant of the function HAL_LTDC_ConfigLayer without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains + * the configuration information for the Layer. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, + uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); + assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); + assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); + assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); + assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); + assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); + assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); + assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); + assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Copy new layer configuration into handle structure */ + hltdc->LayerCfg[LayerIdx] = *pLayerCfg; + + /* Configure the LTDC Layer */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window size without reloading. + * Variant of the function HAL_LTDC_SetWindowSize without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param XSize LTDC Pixel per line + * @param YSize LTDC Line number + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, + uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters (Layers parameters)*/ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(XSize)); + assert_param(IS_LTDC_CFBLNBR(YSize)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal stop */ + pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; + + /* update vertical stop */ + pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; + + /* Reconfigures the color frame buffer pitch in byte */ + pLayerCfg->ImageWidth = XSize; + + /* Reconfigures the frame buffer line number */ + pLayerCfg->ImageHeight = YSize; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window position without reloading. + * Variant of the function HAL_LTDC_SetWindowPosition without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param X0 LTDC window X offset + * @param Y0 LTDC window Y offset + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, + uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(X0)); + assert_param(IS_LTDC_CFBLNBR(Y0)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal start/stop */ + pLayerCfg->WindowX0 = X0; + pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; + + /* update vertical start/stop */ + pLayerCfg->WindowY0 = Y0; + pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the pixel format without reloading. + * Variant of the function HAL_LTDC_SetPixelFormat without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDfef structure that contains + * the configuration information for the LTDC. + * @param Pixelformat new pixel format value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the pixel format */ + pLayerCfg->PixelFormat = Pixelformat; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the layer alpha value without reloading. + * Variant of the function HAL_LTDC_SetAlpha without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Alpha new alpha value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_ALPHA(Alpha)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Alpha value */ + pLayerCfg->Alpha = Alpha; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the frame buffer Address without reloading. + * Variant of the function HAL_LTDC_SetAddress without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Address new address value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Address */ + pLayerCfg->FBStartAdress = Address; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width + * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to + * layer for which we want to read and display on screen only a portion 320x240 taken in the center + * of the buffer. + * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by + * previous call to HAL_LTDC_ConfigLayer(). + * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default + * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). + * Variant of the function HAL_LTDC_SetPitch without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. + * @param LayerIdx LTDC layer index concerned by the modification of line pitch. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t pitchUpdate; + uint32_t pixelFormat; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* get LayerIdx used pixel format */ + pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; + + if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + pitchUpdate = ((LinePitchInPixels * tmp) << 16U); + + /* Clear previously set standard pitch */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; + + /* Set new line pitch value */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + + +/** + * @brief Configure the color keying without reloading. + * Variant of the function HAL_LTDC_ConfigColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param RGBValue the color key value + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the default color values */ + LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); + LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color keying without reloading. + * Variant of the function HAL_LTDC_EnableColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color keying without reloading. + * Variant of the function HAL_LTDC_DisableColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color lookup table without reloading. + * Variant of the function HAL_LTDC_EnableCLUT without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color lookup table without reloading. + * Variant of the function HAL_LTDC_DisableCLUT without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the LTDC handle state. + (+) Get the LTDC handle error code. + +@endverbatim + * @{ + */ + +/** + * @brief Return the LTDC handle state. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL state + */ +HAL_LTDC_StateTypeDef HAL_LTDC_GetState(const LTDC_HandleTypeDef *hltdc) +{ + return hltdc->State; +} + +/** + * @brief Return the LTDC handle error code. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval LTDC Error Code + */ +uint32_t HAL_LTDC_GetError(const LTDC_HandleTypeDef *hltdc) +{ + return hltdc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup LTDC_Private_Functions LTDC Private Functions + * @{ + */ + +/** + * @brief Configure the LTDC peripheral + * @param hltdc Pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg Pointer LTDC Layer Configuration structure + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval None + */ +static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t tmp1; + uint32_t tmp2; + + /* Configure the horizontal start and stop position */ + tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U)) << 16U); + LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS); + LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + \ + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U) + 1U) | tmp); + + /* Configure the vertical start and stop position */ + tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16U); + LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS); + LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1U) | tmp); + + /* Specifies the pixel format */ + LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF); + LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat); + + /* Configure the default color values */ + tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8U); + tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16U); + tmp2 = (pLayerCfg->Alpha0 << 24U); + WRITE_REG(LTDC_LAYER(hltdc, LayerIdx)->DCCR, (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2)); + + /* Specifies the constant alpha value */ + LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA); + LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha); + + /* Specifies the blending factors */ + LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1); + LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2); + + /* Configure the color frame buffer start address */ + WRITE_REG(LTDC_LAYER(hltdc, LayerIdx)->CFBAR, pLayerCfg->FBStartAdress); + + if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + /* Configure the color frame buffer pitch in byte */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP); + LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16U) | + (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 7U)); + /* Configure the frame buffer line number */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR); + LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight); + + /* Enable LTDC_Layer by setting LEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN; +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* LTDC */ + +#endif /* HAL_LTDC_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc_ex.c new file mode 100644 index 000000000..d1a69d0e3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ltdc_ex.c @@ -0,0 +1,154 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ltdc_ex.c + * @author MCD Application Team + * @brief LTDC Extension HAL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(HAL_LTDC_MODULE_ENABLED) && defined(HAL_DSI_MODULE_ENABLED) + +#if defined (LTDC) && defined (DSI) + +/** @defgroup LTDCEx LTDCEx + * @brief LTDC HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions + * @{ + */ + +/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the LTDC + +@endverbatim + * @{ + */ + +/** + * @brief Retrieve common parameters from DSI Video mode configuration structure + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains + * the DSI video mode configuration parameters + * @note The implementation of this function is taking into account the LTDC + * polarities inversion as described in the current LTDC specification + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg) +{ + /* Retrieve signal polarities from DSI */ + + /* The following polarity is inverted: + LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */ + +#if !defined(POLARITIES_INVERSION_UPDATED) + /* Note 1 : Code in line w/ Current LTDC specification */ + hltdc->Init.DEPolarity = (VidCfg->DEPolarity == \ + DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; + hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL; + hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL; +#else + /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ + hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29; + hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29; + hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; +#endif /* POLARITIES_INVERSION_UPDATED */ + + /* Retrieve vertical timing parameters from DSI */ + hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U; + hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U; + hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ + VidCfg->VerticalActive - 1U; + hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ + VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U; + + return HAL_OK; +} + +/** + * @brief Retrieve common parameters from DSI Adapted command mode configuration structure + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains + * the DSI command mode configuration parameters + * @note The implementation of this function is taking into account the LTDC + * polarities inversion as described in the current LTDC specification + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg) +{ + /* Retrieve signal polarities from DSI */ + + /* The following polarities are inverted: + LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH + LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH + LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/ + +#if !defined(POLARITIES_INVERSION_UPDATED) + /* Note 1 : Code in line w/ Current LTDC specification */ + hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == \ + DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; + hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH; + hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH; +#else + /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ + hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29; + hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29; + hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; +#endif /* POLARITIES_INVERSION_UPDATED */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC && DSI */ + +#endif /* HAL_LTCD_MODULE_ENABLED && HAL_DSI_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mce.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mce.c new file mode 100644 index 000000000..849daabb6 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mce.c @@ -0,0 +1,1063 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mce.c + * @author MCD Application Team + * @brief MCE HAL module driver. + * This file provides firmware functions to manage the following + * features of the Memory Cipher Engine (MCE) peripheral: + * + Initialization and de-initialization functions + * + Region setting/enable functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The MCE HAL driver can be used as follows: + + (#) ToBC (refer to MCE comments) + + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_MCE_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_MCE_RegisterCallback() + to register an interrupt callback. + [..] + + ToBC (refer to MCE comments) + + When the compilation flag USE_HAL_MCE_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup MCE MCE + * @brief MCE HAL module driver. + * @{ + */ + + +#ifdef HAL_MCE_MODULE_ENABLED + +#if defined(MCE1) + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +#define MCE_TIMEOUT_VALUE 255U /* Internal timeout for keys valid flag */ +#define MCE1_CONTEXT_NB 2U +/* Private macros ------------------------------------------------------------*/ + + +#define IS_MCE_AES_INSTANCE(INSTANCE) ((INSTANCE) == MCE1) +#define IS_MCE_NOEKEON_INSTANCE(INSTANCE) ((INSTANCE) == MCE2) || ((INSTANCE) == MCE3) + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup MCE_Exported_Functions + * @{ + */ + +/** @defgroup MCE_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the MCE peripheral and create the associated handle. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_Init(MCE_HandleTypeDef *hmce) +{ + /* Check the MCE handle allocation */ + if (hmce == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + if (hmce->State == HAL_MCE_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + __HAL_UNLOCK(hmce); + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) + /* Init the MCE Callback settings */ + hmce->ErrorCallback = HAL_MCE_ErrorCallback; /* Legacy weak callback */ + + if (hmce->MspInitCallback == NULL) + { + hmce->MspInitCallback = HAL_MCE_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hmce->MspInitCallback(hmce); +#else + /* Init the low level hardware */ + HAL_MCE_MspInit(hmce); +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ + } + + /* Change the MCE state */ + hmce->State = HAL_MCE_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the MCE peripheral. + * @note Any lock set at peripheral, key or cipher context level requires a MCE peripheral reset + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_DeInit(MCE_HandleTypeDef *hmce) +{ + MCE_Region_TypeDef *p_region; + MCE_Context_TypeDef *p_context; + + /* Check the MCE handle allocation */ + if (hmce == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + /* Change the MCE state */ + hmce->State = HAL_MCE_STATE_BUSY; + + /* Disable interrupts */ + CLEAR_BIT(hmce->Instance->IAIER, MCE_IAIER_IAEIE | MCE_IAIER_CAEIE); + + /* Disable all regions */ + for (uint32_t i = MCE_REGION1; i <= MCE_REGION4; i++) + { + p_region = (MCE_Region_TypeDef *)((uint32_t)(hmce->Instance) + 0x40U + (0x10U * i)); + CLEAR_BIT(p_region->REGCR, MCE_REGCR_BREN); + CLEAR_BIT(p_region->ATTR, MCE_ATTR_WREN); + } + + /* Disable all cipher contexts if any for the MCE instance */ + if (hmce->Instance == MCE1) + { + for (uint32_t i = 0; i < MCE1_CONTEXT_NB; i++) + { + p_context = (MCE_Context_TypeDef *)((uint32_t)(hmce->Instance) + 0x240U + (0x30U * i)); + CLEAR_BIT(p_context->CCCFGR, MCE_CCCFGR_CCEN); + } + } + + /* Clear privileged-only configuration access */ + CLEAR_BIT(hmce->Instance->PRIVCFGR, MCE_PRIVCFGR_PRIV); + + /* Clear flags */ + WRITE_REG(hmce->Instance->IACR, MCE_IACR_IAEF | MCE_IACR_CAEF); + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) + if (hmce->MspDeInitCallback == NULL) + { + hmce->MspDeInitCallback = HAL_MCE_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: CLOCK, NVIC */ + hmce->MspDeInitCallback(hmce); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_MCE_MspDeInit(hmce); +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ + + /* Change the MCE state */ + hmce->State = HAL_MCE_STATE_RESET; + + /* Reset MCE error status */ + hmce->ErrorCode = HAL_MCE_ERROR_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + + /* Return function status */ + return HAL_OK; +} + + +/** ********* main sequence functions : set the configuration of regions, AES context and Noekeon config *********/ + +/** + * @brief Write instance master or fast master keys + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param pConfig pointer at an MCE_NoekeonConfig structure that contains + the configuration on the Noekeon encryption engine + * @note Writes are ignored if MKLOCK or GLOCK bit is set in MCE_CR register and HAL error + * is reported in that case + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_ConfigNoekeon(MCE_HandleTypeDef *hmce, const MCE_NoekeonConfigTypeDef *pConfig) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + assert_param(IS_MCE_NOEKEON_INSTANCE(hmce->Instance)); + /* If Key is null, or + if the global lock is set or + if the master keys lock is set, + return an error */ + tickstart = HAL_GetTick(); + if (((hmce->Instance->CR & (MCE_CR_GLOCK | MCE_CR_MKLOCK)) == 0U) && (pConfig->pKey != NULL)) + { + /* Take Lock */ + __HAL_LOCK(hmce); + + /* master keys are used for encryption */ + if (pConfig->KeyType == MCE_USE_MASTERKEYS) + { + /* If Master Key valid flag is set, need to write dummy value in MKEYRx to reset it */ + if ((hmce->Instance->SR & MCE_SR_MKVALID) != 0U) + { + WRITE_REG(hmce->Instance->MKEYR0, 0U); + } + + /* Set Key */ + WRITE_REG(hmce->Instance->MKEYR0, pConfig->pKey[0]); + WRITE_REG(hmce->Instance->MKEYR1, pConfig->pKey[1]); + WRITE_REG(hmce->Instance->MKEYR2, pConfig->pKey[2]); + WRITE_REG(hmce->Instance->MKEYR3, pConfig->pKey[3]); + if (HAL_IS_BIT_CLR(hmce->Instance->SR, MCE_SR_MKVALID)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > MCE_TIMEOUT_VALUE) + { + + hmce->ErrorCode |= HAL_MCE_MASTER_KEY_ERROR; + ret = HAL_ERROR; + } + } + + } + else if (pConfig->KeyType == MCE_USE_FASTMASTERKEYS) + { + /* If Fast Master Key valid flag is set, need to write dummy value in FMKEYRx to reset it */ + if ((hmce->Instance->SR & MCE_SR_FMKVALID) != 0U) + { + WRITE_REG(hmce->Instance->FMKEYR0, 0U); + } + /* Set Key */ + WRITE_REG(hmce->Instance->FMKEYR0, pConfig->pKey[0]); + WRITE_REG(hmce->Instance->FMKEYR1, pConfig->pKey[1]); + WRITE_REG(hmce->Instance->FMKEYR2, pConfig->pKey[2]); + WRITE_REG(hmce->Instance->FMKEYR3, pConfig->pKey[3]); + if (HAL_IS_BIT_CLR(hmce->Instance->SR, MCE_SR_FMKVALID)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > MCE_TIMEOUT_VALUE) + { + hmce->ErrorCode |= HAL_MCE_FASTMASTER_KEY_ERROR; + ret = HAL_ERROR; + } + } + } + else + { + /* nothing to do, the keytype is not valid */ + } + __HAL_UNLOCK(hmce); + } + return ret; +} + + +/** + * @brief Set context configuration. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param AESConfig context configuration + * @param ContextIndex index of context that is configured + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_ConfigAESContext(MCE_HandleTypeDef *hmce, const MCE_AESConfigTypeDef *AESConfig, + uint32_t ContextIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Context_TypeDef *p_context; + uint32_t *p_key; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_AES_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + + /* If global lock is set or no configuration provided, context cannot be configured */ + if (((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) && (AESConfig != NULL) && \ + ((ContextIndex == MCE_CONTEXT1) || (ContextIndex == MCE_CONTEXT2))) + { + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + /* Check cipher context is not locked */ + if (((p_context->CCCFGR & MCE_CCCFGR_CCLOCK) != MCE_CCCFGR_CCLOCK)) + { + if ((p_context->CCCFGR & MCE_CCCFGR_KEYLOCK) != MCE_CCCFGR_KEYLOCK) + { + /* Take Lock */ + __HAL_LOCK(hmce); + + /* Write nonce */ + WRITE_REG(p_context->CCNR0, AESConfig->Nonce[0]); + WRITE_REG(p_context->CCNR1, AESConfig->Nonce[1]); + + if (AESConfig->pKey != NULL) + { + p_key = AESConfig->pKey; + WRITE_REG(p_context->CCKEYR0, *p_key); + p_key++; + WRITE_REG(p_context->CCKEYR1, *p_key); + p_key++; + WRITE_REG(p_context->CCKEYR2, *p_key); + p_key++; + WRITE_REG(p_context->CCKEYR3, *p_key); + } + /* Compute theoretically expected CRC and compare it with that reported by the peripheral */ + + /* Write version */ + MODIFY_REG(p_context->CCCFGR, MCE_CCCFGR_VERSION, ((uint32_t) AESConfig->Version) << MCE_CCCFGR_VERSION_Pos); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + } + } + return ret; +} + + +/** + * @brief Set region configuration. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param RegionIndex index of region that is configured + * @param pConfig region configuration + * @note The region is enabled by default once the configuration is complete + * @note An enabled region is temporary disabled to apply the new configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_ConfigRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex, + const MCE_RegionConfigTypeDef *pConfig) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Region_TypeDef *p_region; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_REGIONINDEX(RegionIndex)); + assert_param(IS_MCE_ALGORITHM(hmce->Instance, pConfig->Mode)); + + assert_param(IS_MCE_WRITE(pConfig->AccessMode)); + assert_param(IS_MCE_REGIONPRIVILEGED(pConfig->PrivilegedAccess)); + + /* If global lock is set or no configuration provided, region cannot be configured */ + if (((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) && (pConfig != NULL)) + { + /* Take Lock */ + __HAL_LOCK(hmce); + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x40U + (0x10U * RegionIndex)); + p_region = (MCE_Region_TypeDef *)address; + + /* If region is enabled, disable it during the configuration process */ + if ((p_region->REGCR & MCE_REGCR_BREN) == MCE_REGCR_BREN) + { + CLEAR_BIT(p_region->REGCR, MCE_REGCR_BREN); + } + + /* Set privileged access, ciphering algorithm and context ID */ + MODIFY_REG(p_region->REGCR, MCE_REGCR_ENC | MCE_REGCR_PRIV, \ + pConfig->PrivilegedAccess | pConfig->Mode); + + /* Set start and end addresses */ + WRITE_REG(p_region->SADDR, pConfig->StartAddress); + WRITE_REG(p_region->EADDR, pConfig->EndAddress); + + /* Set write attribute for the region */ + MODIFY_REG(p_region->ATTR, MCE_ATTR_WREN, pConfig->AccessMode); + + /* Enable the region by default */ + SET_BIT(p_region->REGCR, MCE_REGCR_BREN); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + +HAL_StatusTypeDef HAL_MCE_SetRegionAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex, uint32_t RegionIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Region_TypeDef *p_region; + __IO uint32_t address; + + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + assert_param(IS_MCE_REGIONINDEX(RegionIndex)); + + /* If global lock is set, region cannot be configured */ + if ((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) + { + + /* Take Lock */ + __HAL_LOCK(hmce); + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x40U + (0x10U * RegionIndex)); + p_region = (MCE_Region_TypeDef *)address; + + /* If region is enabled, disable it during the configuration process */ + if ((p_region->REGCR & MCE_REGCR_BREN) == MCE_REGCR_BREN) + { + CLEAR_BIT(p_region->REGCR, MCE_REGCR_BREN); + } + + /* Set context ID */ + MODIFY_REG(p_region->REGCR, MCE_REGCR_CTXID, ContextIndex); + + /* Enable the region by default */ + SET_BIT(p_region->REGCR, MCE_REGCR_BREN); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + + } + + return ret; +} + + +/** ********* Enabling and disabling functions : enable/disable AES and Noekeon configurations and regions *********/ + + +/** + * @brief Cipher context enable + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param ContextIndex index of context that is enabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_EnableAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex) +{ + MCE_Context_TypeDef *p_context; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + if ((ContextIndex != MCE_CONTEXT1) && (ContextIndex != MCE_CONTEXT2)) + { + return HAL_ERROR; + } + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + + /* If cipher context is locked or if global lock is set, + and if cipher context is not enabled already, return an error */ + + if ((p_context->CCCFGR & MCE_CCCFGR_CCEN) != MCE_CCCFGR_CCEN) + { + if ((p_context->CCCFGR & MCE_CCCFGR_CCLOCK) == MCE_CCCFGR_CCLOCK) + { + return HAL_ERROR; + } + if ((hmce->Instance->CR & MCE_CR_GLOCK) == MCE_CR_GLOCK) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(hmce); + + /* Enable context */ + SET_BIT(p_context->CCCFGR, MCE_CCCFGR_CCEN); + + __HAL_UNLOCK(hmce); + + return HAL_OK; + +} + +/** + * @brief Cipher context disable + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param ContextIndex index of context that is disabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_DisableAESContext(MCE_HandleTypeDef *hmce, uint32_t ContextIndex) +{ + MCE_Context_TypeDef *p_context; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + if ((ContextIndex != MCE_CONTEXT1) && (ContextIndex != MCE_CONTEXT2)) + { + return HAL_ERROR; + } + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + + /* If cipher context is locked or if global lock is set, + and if cipher context is not disabled already, return an error */ + + if ((p_context->CCCFGR & MCE_CCCFGR_CCEN) == MCE_CCCFGR_CCEN) + { + if ((p_context->CCCFGR & MCE_CCCFGR_CCLOCK) == MCE_CCCFGR_CCLOCK) + { + return HAL_ERROR; + } + if ((hmce->Instance->CR & MCE_CR_GLOCK) == MCE_CR_GLOCK) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(hmce); + + /* Disable context */ + CLEAR_BIT(p_context->CCCFGR, MCE_CCCFGR_CCEN); + + __HAL_UNLOCK(hmce); + + return HAL_OK; + +} + + +/** + * @brief Enable region. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param RegionIndex index of region that is enabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_EnableRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Region_TypeDef *p_region; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_REGIONINDEX(RegionIndex)); + + /* If global lock is set, region cannot be configured */ + if ((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) + { + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x40U + (0x10U * RegionIndex)); + p_region = (MCE_Region_TypeDef *)address; + + /* Take Lock */ + __HAL_LOCK(hmce); + + /* Check region is not enabled, else error */ + if ((p_region->REGCR & MCE_REGCR_BREN) != MCE_REGCR_BREN) + { + /* Enable the region */ + SET_BIT(p_region->REGCR, MCE_REGCR_BREN); + + ret = HAL_OK; + } + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + + +/** + * @brief Disable region. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param RegionIndex index of region that is disabled + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_DisableRegion(MCE_HandleTypeDef *hmce, uint32_t RegionIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Region_TypeDef *p_region; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_REGIONINDEX(RegionIndex)); + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x40U + (0x10U * RegionIndex)); + p_region = (MCE_Region_TypeDef *)address; + + /* If global lock is set, region cannot be configured */ + if ((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) + { + /* Take Lock */ + __HAL_LOCK(hmce); + + /* Check region is enabled, else error */ + if ((p_region->REGCR & MCE_REGCR_BREN) == MCE_REGCR_BREN) + { + /* Disable the region */ + CLEAR_BIT(p_region->REGCR, MCE_REGCR_BREN); + + ret = HAL_OK; + } + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + + +/** ************* Lock functions : Lock AES and Noekeon configurations and keys *********/ + +/** + * @brief Lock MCE instance registers configuration + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @note Once MCE_CR_GLOCK is set, all writes to MCE registers are ignored, + * with the exception of MCE_IACR and MCE_IAIER registers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_LockGlobalConfig(MCE_HandleTypeDef *hmce) +{ + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + /* Take Lock */ + __HAL_LOCK(hmce); + + SET_BIT(hmce->Instance->CR, MCE_CR_GLOCK); + + /* Release Lock */ + __HAL_UNLOCK(hmce); + + return HAL_OK; + +} + +/** + * @brief Lock cipher context + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param ContextIndex index of context that is locked + * @note Once MCE_CCCFGR_CCLOCK is set, writes to MCE_CCxCFGR and MCE_CCxNR registers + * are ignored until next MCE reset. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_LockAESContextConfig(MCE_HandleTypeDef *hmce, uint32_t ContextIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Context_TypeDef *p_context; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + /* If global lock is set or no configuration provided, context cannot be configured */ + if (((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) && \ + ((ContextIndex == MCE_CONTEXT1) || (ContextIndex == MCE_CONTEXT2))) + { + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + + /* Take Lock */ + __HAL_LOCK(hmce); + + SET_BIT(p_context->CCCFGR, MCE_CCCFGR_CCLOCK); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + +/** + * @brief Lock context cipher key + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param ContextIndex index of context the cipher key of which is locked + * @note Once MCE_CCCFGR_KEYLOCK is set, writes to MCE_CCxKEYR registers are ignored + * until next MCE reset. KEYCRC bitfield value does not change. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_LockAESContextKey(MCE_HandleTypeDef *hmce, uint32_t ContextIndex) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + MCE_Context_TypeDef *p_context; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + /* If global lock is set or no configuration provided, context cannot be configured */ + if (((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) && \ + ((ContextIndex == MCE_CONTEXT1) || (ContextIndex == MCE_CONTEXT2))) + { + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + + /* Take Lock */ + __HAL_LOCK(hmce); + + SET_BIT(p_context->CCCFGR, MCE_CCCFGR_KEYLOCK); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + +/** + * @brief Lock Noekeon master keys + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @note Once MCE_CR_MKLOCK is set, writes to MCE_MKEYRx and MCE_FMKEYRx registers are ignored until next MCE reset. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MCE_LockNoekeonMasterKeys(MCE_HandleTypeDef *hmce) +{ + HAL_StatusTypeDef ret = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + /* If global lock is set, master keys lock cannot be set */ + if ((hmce->Instance->CR & MCE_CR_GLOCK) != MCE_CR_GLOCK) + { + /* Take Lock */ + __HAL_LOCK(hmce); + + SET_BIT(hmce->Instance->CR, MCE_CR_MKLOCK); + + ret = HAL_OK; + + /* Release Lock */ + __HAL_UNLOCK(hmce); + } + + return ret; + +} + + +/** + * @brief Initialize the MCE MSP. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval None + */ +__weak void HAL_MCE_MspInit(MCE_HandleTypeDef *hmce) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmce); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_MCE_MspInit can be implemented in the user file. + */ +} + +/** + * @brief DeInitialize MCE MSP. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval None + */ +__weak void HAL_MCE_MspDeInit(MCE_HandleTypeDef *hmce) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmce); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_MCE_MspDeInit can be implemented in the user file. + */ +} + +/** + * @brief get the CRC key of the specified context. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @param pCRCKey pointer to the CRC key + * @param ContextIndex index of CONTEXT the CRC key + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_MCE_GetAESContextCRCKey(const MCE_HandleTypeDef *hmce, uint32_t *pCRCKey, uint32_t ContextIndex) +{ + HAL_StatusTypeDef ret = HAL_OK; + MCE_Context_TypeDef *p_context; + __IO uint32_t address; + + /* Check the parameters */ + assert_param(IS_MCE_AES_INSTANCE(hmce->Instance)); + assert_param(IS_MCE_CONTEXT(hmce->Instance, ContextIndex)); + + address = (__IO uint32_t)((uint32_t)hmce->Instance + 0x240UL + \ + (0x30UL * ((ContextIndex - MCE_CONTEXT1) >> MCE_REGCR_CTXID_Pos))); + p_context = (MCE_Context_TypeDef *)address; + + *pCRCKey = READ_REG((p_context->CCCFGR)) & MCE_CCCFGR_KEYCRC; + + *pCRCKey >>= MCE_CCCFGR_KEYCRC_Pos; + if (*pCRCKey == 0x00U) + { + ret = HAL_ERROR; + } + + return ret; +} + +/** + * @brief Compute Key CRC + * @param pKey pointer at set of keys + * @retval CRC value + */ +uint32_t HAL_MCE_KeyCRCComputation(const uint32_t *pKey) +{ + uint8_t crc7_poly = 0x7; + const uint32_t key_strobe[4] = {0xAA55AA55U, 0x3U, 0x18U, 0xC0U}; + uint8_t i; + uint8_t crc = 0; + uint32_t j; + uint32_t keyval; + uint32_t k; + const uint32_t *temp = pKey; + + for (j = 0U; j < 4U; j++) + { + keyval = *temp; + temp++; + if (j == 0U) + { + keyval ^= key_strobe[0]; + } + else + { + keyval ^= (key_strobe[j] << 24) | ((uint32_t)crc << 16) | (key_strobe[j] << 8) | crc; + } + + crc = 0; + for (i = 0; i < (uint8_t)32; i++) + { + k = ((((uint32_t)crc >> 7) ^ ((keyval >> ((uint8_t)31 - i)) & ((uint8_t)0xF)))) & 1U; + crc <<= 1; + if (k != 0U) + { + crc ^= crc7_poly; + } + } + + crc ^= (uint8_t)0x55; + } + + return (uint32_t) crc; +} + +/** + * @brief Handle MCE interrupt request. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval None + */ +void HAL_MCE_IRQHandler(MCE_HandleTypeDef *hmce) +{ + uint32_t isr_reg; + uint32_t iaesr_reg; + + isr_reg = READ_REG(hmce->Instance->IASR); + if ((isr_reg & MCE_IASR_CAEF) == MCE_IASR_CAEF) + { + /* Set configuration access error */ + hmce->ErrorCode |= HAL_MCE_CONFIGURATION_ACCESS_ERROR; + + /* Clear configuration access error flag */ + WRITE_REG(hmce->Instance->IACR, MCE_IACR_CAEF); + } + if ((isr_reg & MCE_IASR_IAEF) == MCE_IASR_IAEF) + { + iaesr_reg = (READ_REG(hmce->Instance->IAESR) & (MCE_IAESR_IAPRIV | MCE_IAESR_IANRW)); + + /* Clear illegal access error flag */ + WRITE_REG(hmce->Instance->IACR, MCE_IACR_IAEF); + + /* Set precise illegal access error */ + if (iaesr_reg == MCE_IAESR_IAPRIV) + { + /* Illegal privileged data read or instruction fetch access error */ + hmce->ErrorCode |= HAL_MCE_ILLEGAL_ACCESS_READ_PRIV_ERROR; + } + else if (iaesr_reg == (MCE_IAESR_IAPRIV | MCE_IAESR_IANRW)) + { + /* Illegal privileged data write access error */ + hmce->ErrorCode |= HAL_MCE_ILLEGAL_ACCESS_WRITE_PRIV_ERROR; + } + else if (iaesr_reg == MCE_IAESR_IANRW) + { + /* Illegal un privileged data write access error */ + hmce->ErrorCode |= HAL_MCE_ILLEGAL_ACCESS_WRITE_NPRIV_ERROR; + } + else + { + /* Illegal unprivileged data read or instruction fetch access error */ + hmce->ErrorCode |= HAL_MCE_ILLEGAL_ACCESS_READ_NPRIV_ERROR; + } + } + +#if (USE_HAL_MCE_REGISTER_CALLBACKS == 1) + hmce->ErrorCallback(hmce); +#else + HAL_MCE_ErrorCallback(hmce); +#endif /* USE_HAL_MCE_REGISTER_CALLBACKS */ +} + +/** + * @brief MCE error callback. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval None + */ +__weak void HAL_MCE_ErrorCallback(MCE_HandleTypeDef *hmce) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmce); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_MCE_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief Return the MCE state. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval HAL status + */ +HAL_MCE_StateTypeDef HAL_MCE_GetState(MCE_HandleTypeDef const *hmce) +{ + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + return hmce->State; +} + +/** + * @brief Return the MCE error code. + * @param hmce pointer to an MCE_HandleTypeDef structure that contains + * the configuration information for MCE module + * @retval MCE error code (bitfield on 32 bits) + */ +uint32_t HAL_MCE_GetError(MCE_HandleTypeDef const *hmce) +{ + /* Check the parameters */ + assert_param(IS_MCE_ALL_INSTANCE(hmce->Instance)); + + return hmce->ErrorCode; +} + + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* MCE1 */ + +#endif /* HAL_MCE_MODULE_ENABLED */ + + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdf.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdf.c new file mode 100644 index 000000000..fb9ddbce0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdf.c @@ -0,0 +1,2236 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mdf.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Multi-function Digital Filter (MDF) + * peripheral: + * + Initialization and de-initialization + * + Acquisition + * + Clock absence detection + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Initialization and de-initialization *** + ============================================ + [..] + (#) User has first to initialize ADF instance. + (#) As prerequisite, fill in the HAL_MDF_MspInit() : + (++) Enable ADFz clock interface with __HAL_RCC_ADFz_CLK_ENABLE(). + (++) Enable the clocks for the used GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (++) Configure these pins in alternate mode using HAL_GPIO_Init(). + (++) If interrupt mode is used, enable and configure ADFz_FLTx + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (++) If DMA mode is used, initialize and configure DMA. + (#) Configure the common parameters, serial interface parameters and + filter bitstream selection by calling HAL_MDF_Init() function. + + [..] + (#) User can de-initialize ADF instance with HAL_MDF_DeInit() function. + + *** Acquisition *** + =================== + [..] + (#) Configure filter parameters and start acquisition using HAL_MDF_AcqStart(), + HAL_MDF_AcqStart_IT() or HAL_MDF_AcqStart_DMA(). + (#) In polling mode : + (++) Use HAL_MDF_PollForAcq() to detect the end of acquisition. + Use HAL_MDF_GetAcqValue to get acquisition value. + (++) Use HAL_MDF_PollForSndLvl() to detect and get + new sound level value and ambient noise value. + (++) Use HAL_MDF_PollForSad() to detect sound activity. + (#) In interrupt mode : + (++) HAL_MDF_AcqCpltCallback() will be called at the end of acquisition. + Use HAL_MDF_GetAcqValue to get acquisition value. + (++) HAL_MDF_SndLvlCallback() will be called when new + sound level and ambient noise values are available. + (++) HAL_MDF_SadCallback() will be called when + sound activity detection occurs. + (++) HAL_MDF_ErrorCallback() will be called if overflow, filter overrun or + saturation occurs. + Use HAL_MDF_GetErrorCode() to get the corresponding error. + (#) In DMA mode : + (++) HAL_MDF_AcqHalfCpltCallback() and HAL_MDF_AcqCpltCallback() will be called + respectively at the half acquisition and at the acquisition complete. + (++) HAL_MDF_SndLvlCallback() will be called when new + sound level and ambient noise values are available. + (++) HAL_MDF_SadCallback() will be called when + sound activity detection occurs. + (++) HAL_MDF_ErrorCallback() will be called if overflow, filter overrun, + saturation or DMA error occurs. + Use HAL_MDF_GetErrorCode() to get the corresponding error. + (#) Use HAL_MDF_GenerateTrgo() to generate pulse on TRGO signal. + (#) During acquisition, use HAL_MDF_SetDelay() and HAL_MDF_GetDelay() to respectively + set and get the delay on data source. + (#) During acquisition, use HAL_MDF_SetGain() and HAL_MDF_GetGain() to respectively + set and get the filter gain. + (#) Stop acquisition using HAL_MDF_AcqStop(), HAL_MDF_AcqStop_IT() or HAL_MDF_AcqStop_DMA(). + + *** Clock absence detection *** + =============================== + [..] + (#) Clock absence detection is always enabled so no need to start clock absence detection + in polling mode. + Use HAL_MDF_CkabStart_IT() to start clock absence detection in interrupt mode. + (#) In polling mode, use HAL_MDF_PollForCkab() to detect the clock absence. + (#) In interrupt mode, HAL_MDF_ErrorCallback() will be called if clock absence detection + occurs. + Use HAL_MDF_GetErrorCode() to get the corresponding error. + (#) Stop clock absence detection in interrupt mode using HAL_MDF_CkabStop_IT(). + + *** generic functions *** + ========================= + [..] + (#) HAL_MDF_IRQHandler will be called when ADF interrupt occurs. + (#) HAL_MDF_ErrorCallback will be called when ADF error occurs. + (#) Use HAL_MDF_GetState() to get the current ADF instance state. + (#) Use HAL_MDF_GetErrorCode() to get the current ADF instance error code. + + *** Callback registration *** + ============================= + [..] + The compilation define USE_HAL_MDF_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use functions HAL_MDF_RegisterCallback(), HAL_MDF_RegisterOldCallback() + or HAL_MDF_RegisterSndLvlCallback() to register a user callback. + + [..] + Function HAL_MDF_RegisterCallback() allows to register following callbacks : + (+) AcqCpltCallback : Acquisition complete callback. + (+) AcqHalfCpltCallback : Acquisition half complete callback. + (+) SadCallback : Sound activity detection callback (only for ADF instance). + (+) ErrorCallback : Error callback. + (+) MspInitCallback : MSP init callback. + (+) MspDeInitCallback : MSP de-init callback. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + For specific sound level callback use dedicated register callback : + HAL_MDF_RegisterSndLvlCallback(). + + [..] + Use function HAL_MDF_UnRegisterCallback() to reset a callback to the default weak function. + + [..] + HAL_MDF_UnRegisterCallback() takes as parameters the HAL peripheral handle and the Callback ID. + [..] + This function allows to reset following callbacks : + (+) AcqCpltCallback : Acquisition complete callback. + (+) AcqHalfCpltCallback : Acquisition half complete callback. + (+) SadCallback : Sound activity detection callback (only for ADF instance). + (+) ErrorCallback : Error callback. + (+) MspInitCallback : MSP init callback. + (+) MspDeInitCallback : MSP de-init callback. + + [..] + For specific sound level callback use dedicated unregister callback : + HAL_MDF_UnRegisterSndLvlCallback(). + + [..] + By default, after the call of init function and if the state is RESET + all callbacks are reset to the corresponding legacy weak functions : + examples HAL_MDF_AcqCpltCallback(), HAL_MDF_ErrorCallback(). + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak functions in the init and de-init only when these + callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the init and de-init keep and use + the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the init/de-init. + In that case first register the MspInit/MspDeInit user callbacks using + HAL_MDF_RegisterCallback() before calling init or de-init function. + + [..] + When the compilation define USE_HAL_MDF_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak callbacks are used. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup MDF MDF + * @brief MDF HAL module driver + * @{ + */ + +#ifdef HAL_MDF_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup MDF_Private_Typedefs MDF Private Typedefs + * @{ + */ +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup MDF_Private_Constants MDF Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MDF_Private_Variables MDF Private Variables + * @{ + */ +static MDF_HandleTypeDef *v_mdfHandle = NULL; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup MDF_Private_Functions MDF Private Functions + * @{ + */ +static void MDF_AcqStart(MDF_HandleTypeDef *const hmdf, const MDF_FilterConfigTypeDef *const pFilterConfig); +static void MDF_DmaXferCpltCallback(DMA_HandleTypeDef *hdma); +static void MDF_DmaXferHalfCpltCallback(DMA_HandleTypeDef *hdma); +static void MDF_DmaErrorCallback(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup MDF_Exported_Functions MDF Exported Functions + * @{ + */ + +/** @defgroup MDF_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Initialize the ADF instance. + (+) De-initialize the ADF instance. + (+) Register and unregister callbacks. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the MDF instance according to the specified parameters + * in the MDF_InitTypeDef structure and initialize the associated handle. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_Init(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check MDF handle */ + if (hmdf == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_MDF_ALL_INSTANCE(hmdf->Instance)); + assert_param(IS_MDF_FILTER_BITSTREAM(hmdf->Init.FilterBistream)); + assert_param(IS_FUNCTIONAL_STATE(hmdf->Init.SerialInterface.Activation)); + + /* Check that instance has not been already initialized */ + if (v_mdfHandle != NULL) + { + status = HAL_ERROR; + } + else + { +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hmdf->SndLvCallback = HAL_MDF_SndLvlCallback; + hmdf->SadCallback = HAL_MDF_SadCallback; + hmdf->AcqCpltCallback = HAL_MDF_AcqCpltCallback; + hmdf->AcqHalfCpltCallback = HAL_MDF_AcqHalfCpltCallback; + hmdf->ErrorCallback = HAL_MDF_ErrorCallback; + + /* Call MDF MSP init function */ + if (hmdf->MspInitCallback == NULL) + { + hmdf->MspInitCallback = HAL_MDF_MspInit; + } + hmdf->MspInitCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + /* Call MDF MSP init function */ + HAL_MDF_MspInit(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + + /* Configure common parameters */ + /* Check clock generator status */ + if ((ADF1->CKGCR & MDF_CKGCR_CKGACTIVE) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Configure processing clock divider, output clock divider, + output clock pins and output clock generation trigger */ + assert_param(IS_MDF_PROC_CLOCK_DIVIDER(hmdf->Init.CommonParam.ProcClockDivider)); + assert_param(IS_FUNCTIONAL_STATE(hmdf->Init.CommonParam.OutputClock.Activation)); + ADF1->CKGCR = 0U; + ADF1->CKGCR |= ((hmdf->Init.CommonParam.ProcClockDivider - 1U) << MDF_CKGCR_PROCDIV_Pos); + if (hmdf->Init.CommonParam.OutputClock.Activation == ENABLE) + { + assert_param(IS_MDF_OUTPUT_CLOCK_PINS(hmdf->Init.CommonParam.OutputClock.Pins)); + assert_param(IS_MDF_OUTPUT_CLOCK_DIVIDER(hmdf->Init.CommonParam.OutputClock.Divider)); + assert_param(IS_FUNCTIONAL_STATE(hmdf->Init.CommonParam.OutputClock.Trigger.Activation)); + ADF1->CKGCR |= (((hmdf->Init.CommonParam.OutputClock.Divider - 1U) << MDF_CKGCR_CCKDIV_Pos) | + hmdf->Init.CommonParam.OutputClock.Pins | + (hmdf->Init.CommonParam.OutputClock.Pins >> 4U)); + if (hmdf->Init.CommonParam.OutputClock.Trigger.Activation == ENABLE) + { + assert_param(IS_MDF_OUTPUT_CLOCK_TRIGGER_SOURCE(hmdf->Init.CommonParam.OutputClock.Trigger.Source)); + assert_param(IS_MDF_OUTPUT_CLOCK_TRIGGER_EDGE(hmdf->Init.CommonParam.OutputClock.Trigger.Edge)); + ADF1->CKGCR |= (hmdf->Init.CommonParam.OutputClock.Trigger.Source | + hmdf->Init.CommonParam.OutputClock.Trigger.Edge | + MDF_CKGCR_CKGMOD); + } + } + + /* Activate clock generator */ + ADF1->CKGCR |= MDF_CKGCR_CKGDEN; + } + + /* Configure serial interface */ + if ((status == HAL_OK) && (hmdf->Init.SerialInterface.Activation == ENABLE)) + { + /* Check serial interface status */ + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFACTIVE) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Configure mode, clock source and threshold */ + assert_param(IS_MDF_SITF_MODE(hmdf->Init.SerialInterface.Mode)); + assert_param(IS_MDF_SITF_CLOCK_SOURCE(hmdf->Init.SerialInterface.ClockSource)); + assert_param(IS_MDF_SITF_THRESHOLD(hmdf->Init.SerialInterface.Threshold)); + hmdf->Instance->SITFCR = 0U; + hmdf->Instance->SITFCR |= ((hmdf->Init.SerialInterface.Threshold << MDF_SITFCR_STH_Pos) | + hmdf->Init.SerialInterface.Mode | hmdf->Init.SerialInterface.ClockSource); + + /* Activate serial interface */ + hmdf->Instance->SITFCR |= MDF_SITFCR_SITFEN; + } + } + + if (status == HAL_OK) + { + /* Configure filter bitstream */ + hmdf->Instance->BSMXCR &= ~(MDF_BSMXCR_BSSEL); + hmdf->Instance->BSMXCR |= hmdf->Init.FilterBistream; + + /* Update instance pointer */ + v_mdfHandle = hmdf; + + /* Update error code and state */ + hmdf->ErrorCode = MDF_ERROR_NONE; + hmdf->State = HAL_MDF_STATE_READY; + } + } + } + + /* Return function status */ + return status; +} + +/** + * @brief De-initialize the MDF instance. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_DeInit(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check MDF handle */ + if (hmdf == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check parameters */ + assert_param(IS_MDF_ALL_INSTANCE(hmdf->Instance)); + + /* Check that instance has not been already deinitialized */ + if (v_mdfHandle == NULL) + { + status = HAL_ERROR; + } + else + { + /* Disable sound activity detector if needed */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + hmdf->Instance->SADCR &= ~(MDF_SADCR_SADEN); + } + + /* Disable filter if needed */ + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != 0U) + { + hmdf->Instance->DFLTCR &= ~(MDF_DFLTCR_DFLTEN); + } + + /* Disable serial interface if needed */ + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFACTIVE) != 0U) + { + hmdf->Instance->SITFCR &= ~(MDF_SITFCR_SITFEN); + } + + /* Disable all interrupts and clear all pending flags */ + hmdf->Instance->DFLTIER = 0U; + hmdf->Instance->DFLTISR = 0xFFFFFFFFU; + + /* Disable clock generator */ + ADF1->CKGCR &= ~(MDF_CKGCR_CKGDEN); + + /* Call MDF MSP deinit function */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + if (hmdf->MspDeInitCallback == NULL) + { + hmdf->MspDeInitCallback = HAL_MDF_MspDeInit; + } + hmdf->MspDeInitCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_MspDeInit(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + + /* Update instance pointer */ + v_mdfHandle = (MDF_HandleTypeDef *) NULL; + + /* Update state */ + hmdf->State = HAL_MDF_STATE_RESET; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Initialize the MDF instance MSP. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_MspInit(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_MspInit could be implemented in the user file */ +} + +/** + * @brief De-initialize the MDF instance MSP. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_MspDeInit(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_MspDeInit could be implemented in the user file */ +} + +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user MDF callback to be used instead of the weak predefined callback. + * @param hmdf MDF handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_MDF_ACQ_COMPLETE_CB_ID acquisition complete callback ID. + * @arg @ref HAL_MDF_ACQ_HALFCOMPLETE_CB_ID acquisition half complete callback ID. + * @arg @ref HAL_MDF_SAD_CB_ID sound activity detector callback ID (only for ADF instance). + * @arg @ref HAL_MDF_ERROR_CB_ID error callback ID. + * @arg @ref HAL_MDF_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_MDF_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_RegisterCallback(MDF_HandleTypeDef *hmdf, + HAL_MDF_CallbackIDTypeDef CallbackID, + pMDF_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pCallback == NULL) + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + else + { + if (hmdf->State == HAL_MDF_STATE_READY) + { + switch (CallbackID) + { + case HAL_MDF_ACQ_COMPLETE_CB_ID : + hmdf->AcqCpltCallback = pCallback; + break; + case HAL_MDF_ACQ_HALFCOMPLETE_CB_ID : + hmdf->AcqHalfCpltCallback = pCallback; + break; + case HAL_MDF_SAD_CB_ID : + hmdf->SadCallback = pCallback; + break; + case HAL_MDF_ERROR_CB_ID : + hmdf->ErrorCallback = pCallback; + break; + case HAL_MDF_MSPINIT_CB_ID : + hmdf->MspInitCallback = pCallback; + break; + case HAL_MDF_MSPDEINIT_CB_ID : + hmdf->MspDeInitCallback = pCallback; + break; + default : + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (hmdf->State == HAL_MDF_STATE_RESET) + { + switch (CallbackID) + { + case HAL_MDF_MSPINIT_CB_ID : + hmdf->MspInitCallback = pCallback; + break; + case HAL_MDF_MSPDEINIT_CB_ID : + hmdf->MspDeInitCallback = pCallback; + break; + default : + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Unregister a user MDF callback. + * MDF callback is redirected to the weak predefined callback. + * @param hmdf MDF handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_MDF_ACQ_COMPLETE_CB_ID acquisition complete callback ID. + * @arg @ref HAL_MDF_ACQ_HALFCOMPLETE_CB_ID acquisition half complete callback ID. + * @arg @ref HAL_MDF_SAD_CB_ID sound activity detector callback ID (only for ADF instance). + * @arg @ref HAL_MDF_ERROR_CB_ID error callback ID. + * @arg @ref HAL_MDF_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_MDF_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_UnRegisterCallback(MDF_HandleTypeDef *hmdf, + HAL_MDF_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hmdf->State == HAL_MDF_STATE_READY) + { + switch (CallbackID) + { + case HAL_MDF_ACQ_COMPLETE_CB_ID : + hmdf->AcqCpltCallback = HAL_MDF_AcqCpltCallback; + break; + case HAL_MDF_ACQ_HALFCOMPLETE_CB_ID : + hmdf->AcqHalfCpltCallback = HAL_MDF_AcqHalfCpltCallback; + break; + case HAL_MDF_SAD_CB_ID : + hmdf->SadCallback = HAL_MDF_SadCallback; + break; + case HAL_MDF_ERROR_CB_ID : + hmdf->ErrorCallback = HAL_MDF_ErrorCallback; + break; + case HAL_MDF_MSPINIT_CB_ID : + hmdf->MspInitCallback = HAL_MDF_MspInit; + break; + case HAL_MDF_MSPDEINIT_CB_ID : + hmdf->MspDeInitCallback = HAL_MDF_MspDeInit; + break; + default : + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (hmdf->State == HAL_MDF_STATE_RESET) + { + switch (CallbackID) + { + case HAL_MDF_MSPINIT_CB_ID : + hmdf->MspInitCallback = HAL_MDF_MspInit; + break; + case HAL_MDF_MSPDEINIT_CB_ID : + hmdf->MspDeInitCallback = HAL_MDF_MspDeInit; + break; + default : + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Register specific MDF sound level callback + * to be used instead of the weak predefined callback. + * @param hmdf MDF handle. + * @param pCallback pointer to the sound level callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_RegisterSndLvlCallback(MDF_HandleTypeDef *hmdf, + pMDF_SndLvlCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pCallback == NULL) + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + else + { + if (hmdf->State == HAL_MDF_STATE_READY) + { + hmdf->SndLvCallback = pCallback; + } + else + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Unregister the specific MDF sound level callback. + * MDF sound level callback is redirected to the weak predefined callback. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_UnRegisterSndLvlCallback(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hmdf->State == HAL_MDF_STATE_READY) + { + hmdf->SndLvCallback = HAL_MDF_SndLvlCallback; + } + else + { + /* Update error code and status */ + hmdf->ErrorCode |= MDF_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup MDF_Exported_Functions_Group2 Acquisition functions + * @brief Acquisition functions + * +@verbatim + ============================================================================== + ##### Acquisition functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Start and stop acquisition in polling, interrupt or DMA mode. + (+) Wait and get acquisition values. + (+) Generate pulse on TRGO signal. + (+) Modify and get some filter parameters during acquisition. + (+) Wait and get sound level values. + (+) Detect sound activity. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to start acquisition in polling mode. + * @param hmdf MDF handle. + * @param pFilterConfig Filter configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStart(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pFilterConfig == NULL) + { + status = HAL_ERROR; + } + else + { + assert_param(IS_MDF_ACQUISITION_MODE(pFilterConfig->AcquisitionMode)); + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.Activation)); + if ((pFilterConfig->SoundActivity.Activation == ENABLE) && + ((pFilterConfig->AcquisitionMode == MDF_MODE_ASYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_SYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_WINDOW_CONT))) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + /* Check filter status */ + else if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Check SAD status */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Configure filter and start acquisition */ + hmdf->Instance->DFLTCR = 0U; + MDF_AcqStart(hmdf, pFilterConfig); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for available acquisition value. + * @param hmdf MDF handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_PollForAcq(MDF_HandleTypeDef *hmdf, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + uint32_t tickstart = HAL_GetTick(); + + /* Wait for available acquisition value */ + while (((hmdf->Instance->DFLTISR & MDF_DFLTISR_RXNEF) != MDF_DFLTISR_RXNEF) && (status == HAL_OK)) + { + /* Check the timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_TIMEOUT; + } + } + } + + /* Check if data overflow, saturation or reshape filter occurs */ + uint32_t error_flags = (hmdf->Instance->DFLTISR & (MDF_DFLTISR_DOVRF | MDF_DFLTISR_SATF | MDF_DFLTISR_RFOVRF)); + if (error_flags != 0U) + { + /* Update error code */ + if ((error_flags & MDF_DFLTISR_DOVRF) == MDF_DFLTISR_DOVRF) + { + hmdf->ErrorCode |= MDF_ERROR_ACQUISITION_OVERFLOW; + } + if ((error_flags & MDF_DFLTISR_SATF) == MDF_DFLTISR_SATF) + { + hmdf->ErrorCode |= MDF_ERROR_SATURATION; + } + if ((error_flags & MDF_DFLTISR_RFOVRF) == MDF_DFLTISR_RFOVRF) + { + hmdf->ErrorCode |= MDF_ERROR_RSF_OVERRUN; + } + + /* Clear corresponding flags */ + hmdf->Instance->DFLTISR |= error_flags; + + /* Call error callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + + if (status == HAL_OK) + { + /* Update state only in asynchronous single shot mode */ + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_ACQMOD) == MDF_MODE_ASYNC_SINGLE) + { + hmdf->State = HAL_MDF_STATE_READY; + } + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get acquisition value. + * @param hmdf MDF handle. + * @param pValue Acquisition value on 24 MSB. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_GetAcqValue(const MDF_HandleTypeDef *hmdf, int32_t *pValue) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pValue == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + /* Get acquisition value */ + *pValue = (int32_t) hmdf->Instance->DFLTDR; + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop acquisition in polling mode. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStop(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + /* Check if state is ready and filter active */ + if (hmdf->State == HAL_MDF_STATE_READY) + { + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != MDF_DFLTCR_DFLTACTIVE) + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + /* Disable sound activity detector if needed */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + hmdf->Instance->SADCR &= ~(MDF_SADCR_SADEN); + } + } + + if (status == HAL_OK) + { + /* Disable filter */ + hmdf->Instance->DFLTCR &= ~(MDF_DFLTCR_DFLTEN); + + /* Clear all potential pending flags */ + hmdf->Instance->DFLTISR |= (MDF_DFLTISR_DOVRF | MDF_DFLTISR_SATF | MDF_DFLTISR_RFOVRF | + MDF_DFLTISR_SDDETF | MDF_DFLTISR_SDLVLF); + + /* Update state */ + hmdf->State = HAL_MDF_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start acquisition in interrupt mode. + * @param hmdf MDF handle. + * @param pFilterConfig Filter configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStart_IT(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pFilterConfig == NULL) + { + status = HAL_ERROR; + } + else + { + assert_param(IS_MDF_ACQUISITION_MODE(pFilterConfig->AcquisitionMode)); + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.Activation)); + if ((pFilterConfig->SoundActivity.Activation == ENABLE) && + ((pFilterConfig->AcquisitionMode == MDF_MODE_ASYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_SYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_WINDOW_CONT))) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + /* Check filter status */ + else if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Check SAD status */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + if ((pFilterConfig->SoundActivity.Activation == DISABLE) || + (pFilterConfig->SoundActivity.DataMemoryTransfer != MDF_SAD_NO_MEMORY_TRANSFER)) + { + /* Enable data overflow and fifo threshold interrupts */ + hmdf->Instance->DFLTIER |= (MDF_DFLTIER_DOVRIE | MDF_DFLTIER_FTHIE); + } + + if (pFilterConfig->ReshapeFilter.Activation == ENABLE) + { + /* Enable reshape filter overrun interrupt */ + hmdf->Instance->DFLTIER |= MDF_DFLTIER_RFOVRIE; + } + + /* Enable saturation interrupt */ + hmdf->Instance->DFLTIER |= MDF_DFLTIER_SATIE; + + if (pFilterConfig->SoundActivity.Activation == ENABLE) + { + /* Enable sound level value ready and sound activity detection interrupts */ + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.SoundLevelInterrupt)); + hmdf->Instance->DFLTIER |= (pFilterConfig->SoundActivity.SoundLevelInterrupt == ENABLE) ? + (MDF_DFLTIER_SDLVLIE | MDF_DFLTIER_SDDETIE) : + MDF_DFLTIER_SDDETIE; + } + + /* Configure filter and start acquisition */ + hmdf->Instance->DFLTCR = 0U; + MDF_AcqStart(hmdf, pFilterConfig); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop acquisition in interrupt mode. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStop_IT(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + /* Check if state is ready and filter active */ + if (hmdf->State == HAL_MDF_STATE_READY) + { + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != MDF_DFLTCR_DFLTACTIVE) + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + /* Disable sound activity detector if needed */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + hmdf->Instance->SADCR &= ~(MDF_SADCR_SADEN); + } + } + + if (status == HAL_OK) + { + /* Disable filter */ + hmdf->Instance->DFLTCR &= ~(MDF_DFLTCR_DFLTEN); + + /* Disable interrupts and clear all potential pending flags */ + hmdf->Instance->DFLTIER &= ~(MDF_DFLTIER_FTHIE | MDF_DFLTIER_DOVRIE | MDF_DFLTIER_SATIE | + MDF_DFLTIER_RFOVRIE | MDF_DFLTIER_SDDETIE | MDF_DFLTIER_SDLVLIE); + hmdf->Instance->DFLTISR |= (MDF_DFLTISR_DOVRF | MDF_DFLTISR_SATF | MDF_DFLTISR_RFOVRF | + MDF_DFLTISR_SDDETF | MDF_DFLTISR_SDLVLF); + + /* Update state */ + hmdf->State = HAL_MDF_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start acquisition in DMA mode. + * @param hmdf MDF handle. + * @param pFilterConfig Filter configuration parameters. + * @param pDmaConfig DMA configuration parameters. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStart_DMA(MDF_HandleTypeDef *hmdf, const MDF_FilterConfigTypeDef *pFilterConfig, + const MDF_DmaConfigTypeDef *pDmaConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if ((pFilterConfig == NULL) || (pDmaConfig == NULL)) + { + status = HAL_ERROR; + } + else + { + assert_param(IS_FUNCTIONAL_STATE(pDmaConfig->MsbOnly)); + assert_param(IS_MDF_ACQUISITION_MODE(pFilterConfig->AcquisitionMode)); + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.Activation)); + if ((pFilterConfig->SoundActivity.Activation == ENABLE) && + ((pFilterConfig->AcquisitionMode == MDF_MODE_ASYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_SYNC_SINGLE) || + (pFilterConfig->AcquisitionMode == MDF_MODE_WINDOW_CONT))) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + /* Check filter status */ + else if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != 0U) + { + status = HAL_ERROR; + } + else + { + /* Check SAD status */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + uint32_t SrcAddress; + + if (pFilterConfig->ReshapeFilter.Activation == ENABLE) + { + /* Enable reshape filter overrun interrupt */ + hmdf->Instance->DFLTIER |= MDF_DFLTIER_RFOVRIE; + } + + /* Enable saturation interrupt */ + hmdf->Instance->DFLTIER |= MDF_DFLTIER_SATIE; + + if (pFilterConfig->SoundActivity.Activation == ENABLE) + { + /* Enable sound level value ready and sound activity detection interrupts */ + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.SoundLevelInterrupt)); + hmdf->Instance->DFLTIER |= (pFilterConfig->SoundActivity.SoundLevelInterrupt == ENABLE) ? + (MDF_DFLTIER_SDLVLIE | MDF_DFLTIER_SDDETIE) : + MDF_DFLTIER_SDDETIE; + } + + /* Enable MDF DMA requests */ + hmdf->Instance->DFLTCR = MDF_DFLTCR_DMAEN; + + /* Start DMA transfer */ + hmdf->hdma->XferCpltCallback = MDF_DmaXferCpltCallback; + hmdf->hdma->XferHalfCpltCallback = MDF_DmaXferHalfCpltCallback; + hmdf->hdma->XferErrorCallback = MDF_DmaErrorCallback; + SrcAddress = (pDmaConfig->MsbOnly == ENABLE) ? (((uint32_t) &hmdf->Instance->DFLTDR) + 2U) : + (uint32_t) &hmdf->Instance->DFLTDR; + if ((hmdf->hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hmdf->hdma->LinkedListQueue != NULL) + { + hmdf->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = pDmaConfig->DataLength; + hmdf->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = SrcAddress; + hmdf->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = pDmaConfig->Address; + + status = HAL_DMAEx_List_Start_IT(hmdf->hdma); + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hmdf->hdma, SrcAddress, pDmaConfig->Address, pDmaConfig->DataLength); + } + if (status != HAL_OK) + { + /* Update state */ + hmdf->State = HAL_MDF_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Configure filter and start acquisition */ + MDF_AcqStart(hmdf, pFilterConfig); + } + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop acquisition in DMA mode. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_AcqStop_DMA(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check if state is ready and filter active */ + if (hmdf->State == HAL_MDF_STATE_READY) + { + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_DFLTACTIVE) != MDF_DFLTCR_DFLTACTIVE) + { + status = HAL_ERROR; + } + } + else + { + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + /* Stop the DMA transfer */ + if (HAL_DMA_Abort(hmdf->hdma) != HAL_OK) + { + /* Update state */ + hmdf->State = HAL_MDF_STATE_ERROR; + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + /* Disable sound activity detector if needed */ + if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) != 0U) + { + hmdf->Instance->SADCR &= ~(MDF_SADCR_SADEN); + } + + /* Disable filter */ + hmdf->Instance->DFLTCR &= ~(MDF_DFLTCR_DFLTEN); + + /* Disable interrupts and clear all potential pending flags */ + hmdf->Instance->DFLTIER &= ~(MDF_DFLTIER_SATIE | MDF_DFLTIER_RFOVRIE | MDF_DFLTIER_SDDETIE | + MDF_DFLTIER_SDLVLIE); + hmdf->Instance->DFLTISR |= (MDF_DFLTISR_SATF | MDF_DFLTISR_RFOVRF | MDF_DFLTISR_SDDETF | + MDF_DFLTISR_SDLVLF); + + /* Disable MDF DMA requests */ + hmdf->Instance->DFLTCR &= ~(MDF_DFLTCR_DMAEN); + + /* Update state */ + hmdf->State = HAL_MDF_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to generate pulse on TRGO signal. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_GenerateTrgo(const MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_READY) + { + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Check if trigger output control is already active */ + if ((ADF1->GCR & MDF_GCR_TRGO) == MDF_GCR_TRGO) + { + status = HAL_ERROR; + } + else + { + /* Generate pulse on trigger output control signal */ + ADF1->GCR |= MDF_GCR_TRGO; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to set delay to apply on data source in number of samples. + * @param hmdf MDF handle. + * @param Delay Delay to apply on data source in number of samples. + * This parameter must be a number between Min_Data = 0 and Max_Data = 127. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_SetDelay(MDF_HandleTypeDef *hmdf, uint32_t Delay) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_MDF_DELAY(Delay)); + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + /* Check if bitstream delay is already active */ + if ((hmdf->Instance->DLYCR & MDF_DLYCR_SKPBF) == MDF_DLYCR_SKPBF) + { + status = HAL_ERROR; + } + else + { + /* Configure bitstream delay */ + hmdf->Instance->DLYCR |= Delay; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get current delay applied on data source in number of samples. + * @param hmdf MDF handle. + * @param pDelay Current delay applied on data source in number of samples. + * This value is between Min_Data = 0 and Max_Data = 127. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_GetDelay(const MDF_HandleTypeDef *hmdf, uint32_t *pDelay) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pDelay == NULL) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + /* Get current bitstream delay */ + *pDelay = (hmdf->Instance->DLYCR & MDF_DLYCR_SKPDLY); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to set filter gain. + * @param hmdf MDF handle. + * @param Gain Filter gain in step of around 3db (from -48db to 72dB). + * This parameter must be a number between Min_Data = -16 and Max_Data = 24. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_SetGain(MDF_HandleTypeDef *hmdf, int32_t Gain) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_MDF_GAIN(Gain)); + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + uint32_t register_gain_value; + uint32_t tmp_register; + + if (Gain < 0) + { + int32_t adjust_gain; + + /* adjust gain value to set on register for negative value (offset of -16) */ + adjust_gain = Gain - 16; + register_gain_value = ((uint32_t) adjust_gain & 0x3FU); + } + else + { + /* for positive value, no offset to apply */ + register_gain_value = (uint32_t) Gain; + } + /* Set gain */ + tmp_register = (hmdf->Instance->DFLTCICR & ~(MDF_DFLTCICR_SCALE)); + hmdf->Instance->DFLTCICR = (tmp_register | (register_gain_value << MDF_DFLTCICR_SCALE_Pos)); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get filter gain. + * @param hmdf MDF handle. + * @param pGain Filter gain in step of around 3db (from -48db to 72dB). + * This parameter is between Min_Data = -16 and Max_Data = 24. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_GetGain(const MDF_HandleTypeDef *hmdf, int32_t *pGain) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if (pGain == NULL) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + else + { + uint32_t register_gain_value; + + /* Get current gain */ + register_gain_value = ((hmdf->Instance->DFLTCICR & MDF_DFLTCICR_SCALE) >> MDF_DFLTCICR_SCALE_Pos); + if (register_gain_value > 31U) + { + /* adjust gain value to set on register for negative value (offset of +16) */ + register_gain_value |= 0xFFFFFFC0U; + *pGain = (int32_t) register_gain_value + 16; + } + else + { + /* for positive value, no offset to apply */ + *pGain = (int32_t) register_gain_value; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for sound level data. + * @param hmdf MDF handle. + * @param Timeout Timeout value in milliseconds. + * @param pSoundLevel Sound level. + This parameter can be a value between Min_Data = 0 and Max_Data = 32767. + * @param pAmbientNoise Ambient noise. + This parameter can be a value between Min_Data = 0 and Max_Data = 32767. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_PollForSndLvl(MDF_HandleTypeDef *hmdf, uint32_t Timeout, uint32_t *pSoundLevel, + uint32_t *pAmbientNoise) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + if ((pSoundLevel == NULL) || (pAmbientNoise == NULL)) + { + status = HAL_ERROR; + } + /* Check state */ + else if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + /* Check SAD status */ + else if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t tickstart = HAL_GetTick(); + + /* Wait for available sound level data */ + while (((hmdf->Instance->DFLTISR & MDF_DFLTISR_SDLVLF) != MDF_DFLTISR_SDLVLF) && (status == HAL_OK)) + { + /* Check the timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_TIMEOUT; + } + } + } + + if (status == HAL_OK) + { + /* Get sound level */ + *pSoundLevel = hmdf->Instance->SADSDLVR; + + /* Get ambient noise */ + *pAmbientNoise = hmdf->Instance->SADANLVR; + + /* Clear sound level ready flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_SDLVLF; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for sound activity detection. + * @param hmdf MDF handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_PollForSad(MDF_HandleTypeDef *hmdf, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + status = HAL_ERROR; + } + /* Check SAD status */ + else if ((hmdf->Instance->SADCR & MDF_SADCR_SADACTIVE) == 0U) + { + status = HAL_ERROR; + } + else + { + uint32_t tickstart = HAL_GetTick(); + + /* Wait for sound activity detection */ + while (((hmdf->Instance->DFLTISR & MDF_DFLTISR_SDDETF) != MDF_DFLTISR_SDDETF) && (status == HAL_OK)) + { + /* Check the timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_TIMEOUT; + } + } + } + + if (status == HAL_OK) + { + /* Clear sound activity detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_SDDETF; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief MDF acquisition complete callback. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_AcqCpltCallback(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_AcqCpltCallback could be implemented in the user file */ +} + +/** + * @brief MDF acquisition half complete callback. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_AcqHalfCpltCallback(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_AcqHalfCpltCallback could be implemented in the user file */ +} + +/** + * @brief MDF sound level callback. + * @param hmdf MDF handle. + * @param SoundLevel Sound level value computed by sound activity detector. + * This parameter can be a value between Min_Data = 0 and Max_Data = 32767. + * @param AmbientNoise Ambient noise value computed by sound activity detector. + * This parameter can be a value between Min_Data = 0 and Max_Data = 32767. + * @retval None. + */ +__weak void HAL_MDF_SndLvlCallback(MDF_HandleTypeDef *hmdf, uint32_t SoundLevel, uint32_t AmbientNoise) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + UNUSED(SoundLevel); + UNUSED(AmbientNoise); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_SndLvlCallback could be implemented in the user file */ +} + +/** + * @brief MDF sound activity detector callback. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_SadCallback(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_SadCallback could be implemented in the user file */ +} + +/** + * @} + */ + +/** @defgroup MDF_Exported_Functions_Group3 Clock absence detection functions + * @brief Clock absence detection functions + * +@verbatim + ============================================================================== + ##### Clock absence detection functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Start and stop clock absence detection in interrupt mode. + (+) Detect clock absence. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to poll for the clock absence detection. + * @param hmdf MDF handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_PollForCkab(MDF_HandleTypeDef *hmdf, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Check serial interface status and mode */ + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFACTIVE) == 0U) + { + status = HAL_ERROR; + } + else + { + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFMOD) != MDF_SITF_NORMAL_SPI_MODE) + { + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + uint32_t tickstart = HAL_GetTick(); + + /* Wait for clock absence detection */ + while (((hmdf->Instance->DFLTISR & MDF_DFLTISR_CKABF) != MDF_DFLTISR_CKABF) && (status == HAL_OK)) + { + /* Check the timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_TIMEOUT; + } + } + } + + if (status == HAL_OK) + { + /* Clear clock absence detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_CKABF; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start clock absence detection in interrupt mode. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_CkabStart_IT(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Check serial interface status and mode */ + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFACTIVE) == 0U) + { + status = HAL_ERROR; + } + else + { + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFMOD) != MDF_SITF_NORMAL_SPI_MODE) + { + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + /* Clear clock absence detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_CKABF; + + /* Check clock absence detection flag */ + if ((hmdf->Instance->DFLTISR & MDF_DFLTISR_CKABF) == MDF_DFLTISR_CKABF) + { + status = HAL_ERROR; + } + else + { + /* Enable clock absence detection interrupt */ + hmdf->Instance->DFLTIER |= MDF_DFLTIER_CKABIE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop clock absence detection in interrupt mode. + * @param hmdf MDF handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_MDF_CkabStop_IT(MDF_HandleTypeDef *hmdf) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check state */ + if (hmdf->State != HAL_MDF_STATE_ACQUISITION) + { + if (hmdf->State != HAL_MDF_STATE_READY) + { + status = HAL_ERROR; + } + } + + if (status == HAL_OK) + { + /* Check serial interface status and mode */ + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFACTIVE) == 0U) + { + status = HAL_ERROR; + } + else + { + if ((hmdf->Instance->SITFCR & MDF_SITFCR_SITFMOD) != MDF_SITF_NORMAL_SPI_MODE) + { + status = HAL_ERROR; + } + } + } + + if (status == HAL_OK) + { + /* Disable clock absence detection interrupt */ + hmdf->Instance->DFLTIER &= ~(MDF_DFLTIER_CKABIE); + + /* Clear potential pending clock absence detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_CKABF; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup MDF_Exported_Functions_Group4 Generic functions + * @brief Generic functions + * +@verbatim + ============================================================================== + ##### Generic functions ##### + ============================================================================== + [..] This section provides functions allowing to : + (+) Handle MDF interrupt. + (+) Inform user that error occurs. + (+) Get the current MDF instance state. + (+) Get the current MDF instance error code. +@endverbatim + * @{ + */ + +/** + * @brief This function handles the MDF interrupts. + * @param hmdf MDF handle. + * @retval None. + */ +void HAL_MDF_IRQHandler(MDF_HandleTypeDef *hmdf) +{ + uint32_t tmp_reg1; + uint32_t tmp_reg2; + uint32_t interrupts; + + /* Read current flags and interrupts and determine which ones occur */ + tmp_reg1 = hmdf->Instance->DFLTIER; + tmp_reg2 = hmdf->Instance->DFLTISR; + interrupts = (tmp_reg1 & tmp_reg2); + + /* Check if data overflow occurs */ + if ((interrupts & MDF_DFLTISR_DOVRF) == MDF_DFLTISR_DOVRF) + { + /* Clear data overflow flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_DOVRF; + + /* Update error code */ + hmdf->ErrorCode |= MDF_ERROR_ACQUISITION_OVERFLOW; + + /* Call error callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + /* Check if RXFIFO threshold occurs */ + else if ((interrupts & MDF_DFLTISR_FTHF) == MDF_DFLTISR_FTHF) + { + /* Call acquisition complete callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->AcqCpltCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_AcqCpltCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + + /* Update state only in asynchronous single shot mode */ + if ((hmdf->Instance->DFLTCR & MDF_DFLTCR_ACQMOD) == MDF_MODE_ASYNC_SINGLE) + { + hmdf->State = HAL_MDF_STATE_READY; + } + } + /* Check if reshape filter overrun occurs */ + else if ((interrupts & MDF_DFLTISR_RFOVRF) == MDF_DFLTISR_RFOVRF) + { + /* Clear reshape filter overrun flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_RFOVRF; + + /* Update error code */ + hmdf->ErrorCode |= MDF_ERROR_RSF_OVERRUN; + + /* Call error callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + /* Check if clock absence detection occurs */ + else if ((interrupts & MDF_DFLTISR_CKABF) == MDF_DFLTISR_CKABF) + { + /* Clear clock absence detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_CKABF; + + /* Update error code */ + hmdf->ErrorCode |= MDF_ERROR_CLOCK_ABSENCE; + + /* Call error callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + /* Check if saturation occurs */ + else if ((interrupts & MDF_DFLTISR_SATF) == MDF_DFLTISR_SATF) + { + /* Clear saturation flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_SATF; + + /* Update error code */ + hmdf->ErrorCode |= MDF_ERROR_SATURATION; + + /* Call error callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + /* Check if sound activity detection occurs */ + else if ((interrupts & MDF_DFLTISR_SDDETF) == MDF_DFLTISR_SDDETF) + { + /* Clear sound activity detection flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_SDDETF; + + /* Call sound activity detection callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->SadCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_SadCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + else + { + /* Check if sound level ready occurs */ + if ((interrupts & MDF_DFLTISR_SDLVLF) == MDF_DFLTISR_SDLVLF) + { + uint32_t sound_level; + uint32_t ambient_noise; + + /* Get sound level */ + sound_level = hmdf->Instance->SADSDLVR; + + /* Get ambient noise */ + ambient_noise = hmdf->Instance->SADANLVR; + + /* Clear sound level ready flag */ + hmdf->Instance->DFLTISR |= MDF_DFLTISR_SDLVLF; + + /* Call sound level callback */ +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->SndLvCallback(hmdf, sound_level, ambient_noise); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_SndLvlCallback(hmdf, sound_level, ambient_noise); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief MDF error callback. + * @param hmdf MDF handle. + * @retval None. + */ +__weak void HAL_MDF_ErrorCallback(MDF_HandleTypeDef *hmdf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdf); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_MDF_ErrorCallback could be implemented in the user file */ +} + +/** + * @brief This function allows to get the current MDF state. + * @param hmdf MDF handle. + * @retval MDF state. + */ +HAL_MDF_StateTypeDef HAL_MDF_GetState(const MDF_HandleTypeDef *hmdf) +{ + /* Return MDF state */ + return hmdf->State; +} + +/** + * @brief This function allows to get the current MDF error. + * @param hmdf MDF handle. + * @retval MDF error code. + */ +uint32_t HAL_MDF_GetError(const MDF_HandleTypeDef *hmdf) +{ + /* Return MDF error code */ + return hmdf->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup MDF_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief This function allows to configure filter and start acquisition. + * @param hmdf MDF handle. + * @param pFilterConfig Filter configuration parameters. + * @retval None. + */ +static void MDF_AcqStart(MDF_HandleTypeDef *const hmdf, const MDF_FilterConfigTypeDef *const pFilterConfig) +{ + uint32_t register_gain_value; + + /* Configure acquisition mode, discard samples, trigger and fifo threshold */ + assert_param(IS_MDF_DISCARD_SAMPLES(pFilterConfig->DiscardSamples)); + assert_param(IS_MDF_FIFO_THRESHOLD(pFilterConfig->FifoThreshold)); + if ((pFilterConfig->AcquisitionMode == MDF_MODE_ASYNC_CONT) || + (pFilterConfig->AcquisitionMode == MDF_MODE_ASYNC_SINGLE)) + { + /* Trigger parameters are not used */ + hmdf->Instance->DFLTCR |= (pFilterConfig->AcquisitionMode | pFilterConfig->FifoThreshold | + (pFilterConfig->DiscardSamples << MDF_DFLTCR_NBDIS_Pos)); + } + else + { + /* Trigger parameters are used */ + assert_param(IS_MDF_TRIGGER_SOURCE(pFilterConfig->Trigger.Source)); + assert_param(IS_MDF_TRIGGER_EDGE(pFilterConfig->Trigger.Edge)); + hmdf->Instance->DFLTCR |= (pFilterConfig->AcquisitionMode | pFilterConfig->FifoThreshold | + pFilterConfig->Trigger.Source | pFilterConfig->Trigger.Edge | + (pFilterConfig->DiscardSamples << MDF_DFLTCR_NBDIS_Pos)); + } + + /* Configure data source, CIC mode, decimation ratio and gain */ + assert_param(IS_MDF_DATA_SOURCE(pFilterConfig->DataSource)); + assert_param(IS_MDF_CIC_MODE(pFilterConfig->CicMode)); + assert_param(IS_MDF_DECIMATION_RATIO(pFilterConfig->DecimationRatio)); + assert_param(IS_MDF_GAIN(pFilterConfig->Gain)); + if (pFilterConfig->Gain < 0) + { + int32_t adjust_gain; + + /* adjust gain value to set on register for negative value (offset of -16) */ + adjust_gain = pFilterConfig->Gain - 16; + register_gain_value = ((uint32_t) adjust_gain & 0x3FU); + } + else + { + /* for positive value, no offset to apply */ + register_gain_value = (uint32_t) pFilterConfig->Gain; + } + hmdf->Instance->DFLTCICR = (pFilterConfig->DataSource | pFilterConfig->CicMode | + ((pFilterConfig->DecimationRatio - 1U) << MDF_DFLTCICR_MCICD_Pos) | + (register_gain_value << MDF_DFLTCICR_SCALE_Pos)); + + /* Configure bitstream delay */ + assert_param(IS_MDF_DELAY(pFilterConfig->Delay)); + hmdf->Instance->DLYCR = pFilterConfig->Delay; + + /* Configure reshape filter */ + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->ReshapeFilter.Activation)); + hmdf->Instance->DFLTRSFR = 0U; + if (pFilterConfig->ReshapeFilter.Activation == ENABLE) + { + /* Configure reshape filter decimation ratio */ + assert_param(IS_MDF_RSF_DECIMATION_RATIO(pFilterConfig->ReshapeFilter.DecimationRatio)); + hmdf->Instance->DFLTRSFR |= pFilterConfig->ReshapeFilter.DecimationRatio; + } + else + { + /* Bypass reshape filter */ + hmdf->Instance->DFLTRSFR |= MDF_DFLTRSFR_RSFLTBYP; + } + + /* Configure high-pass filter */ + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->HighPassFilter.Activation)); + if (pFilterConfig->HighPassFilter.Activation == ENABLE) + { + /* Configure high-pass filter cut-off frequency */ + assert_param(IS_MDF_HPF_CUTOFF_FREQ(pFilterConfig->HighPassFilter.CutOffFrequency)); + hmdf->Instance->DFLTRSFR |= pFilterConfig->HighPassFilter.CutOffFrequency; + } + else + { + /* Bypass high-pass filter */ + hmdf->Instance->DFLTRSFR |= MDF_DFLTRSFR_HPFBYP; + } + + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.Activation)); + if (pFilterConfig->SoundActivity.Activation == ENABLE) + { + /* Configure SAD mode, frame size, hysteresis, sound trigger event + and data memory transfer only for ADF instance */ + assert_param(IS_MDF_SAD_MODE(pFilterConfig->SoundActivity.Mode)); + assert_param(IS_MDF_SAD_FRAME_SIZE(pFilterConfig->SoundActivity.FrameSize)); + if (pFilterConfig->SoundActivity.Mode != MDF_SAD_AMBIENT_NOISE_DETECTOR) + { + assert_param(IS_FUNCTIONAL_STATE(pFilterConfig->SoundActivity.Hysteresis)); + } + assert_param(IS_MDF_SAD_SOUND_TRIGGER(pFilterConfig->SoundActivity.SoundTriggerEvent)); + assert_param(IS_MDF_SAD_DATA_MEMORY_TRANSFER(pFilterConfig->SoundActivity.DataMemoryTransfer)); + if ((pFilterConfig->SoundActivity.Mode != MDF_SAD_AMBIENT_NOISE_DETECTOR) && + (pFilterConfig->SoundActivity.Hysteresis == ENABLE)) + { + hmdf->Instance->SADCR = (pFilterConfig->SoundActivity.Mode | pFilterConfig->SoundActivity.FrameSize | + MDF_SADCR_HYSTEN | pFilterConfig->SoundActivity.SoundTriggerEvent | + pFilterConfig->SoundActivity.DataMemoryTransfer); + } + else + { + hmdf->Instance->SADCR = (pFilterConfig->SoundActivity.Mode | pFilterConfig->SoundActivity.FrameSize | + pFilterConfig->SoundActivity.SoundTriggerEvent | + pFilterConfig->SoundActivity.DataMemoryTransfer); + } + + /* Configure SAD minimum noise level, hangover window, learning frames, + ambient noise slope control and signal noise threshold only for ADF instance */ + assert_param(IS_MDF_SAD_MIN_NOISE_LEVEL(pFilterConfig->SoundActivity.MinNoiseLevel)); + assert_param(IS_MDF_SAD_HANGOVER_WINDOW(pFilterConfig->SoundActivity.HangoverWindow)); + assert_param(IS_MDF_SAD_LEARNING_FRAMES(pFilterConfig->SoundActivity.LearningFrames)); + assert_param(IS_MDF_SAD_SIGNAL_NOISE_THRESHOLD(pFilterConfig->SoundActivity.SignalNoiseThreshold)); + if (pFilterConfig->SoundActivity.Mode != MDF_SAD_SOUND_DETECTOR) + { + assert_param(IS_MDF_SAD_AMBIENT_NOISE_SLOPE(pFilterConfig->SoundActivity.AmbientNoiseSlope)); + hmdf->Instance->SADCFGR = ((pFilterConfig->SoundActivity.MinNoiseLevel << MDF_SADCFGR_ANMIN_Pos) | + pFilterConfig->SoundActivity.HangoverWindow | + pFilterConfig->SoundActivity.LearningFrames | + (pFilterConfig->SoundActivity.AmbientNoiseSlope << MDF_SADCFGR_ANSLP_Pos) | + pFilterConfig->SoundActivity.SignalNoiseThreshold); + } + else + { + hmdf->Instance->SADCFGR = ((pFilterConfig->SoundActivity.MinNoiseLevel << MDF_SADCFGR_ANMIN_Pos) | + pFilterConfig->SoundActivity.HangoverWindow | + pFilterConfig->SoundActivity.LearningFrames | + pFilterConfig->SoundActivity.SignalNoiseThreshold); + } + } + else + { + /* SAD is not used */ + hmdf->Instance->SADCR = 0U; + hmdf->Instance->SADCFGR = 0U; + } + + /* Update instance state */ + hmdf->State = HAL_MDF_STATE_ACQUISITION; + + /* Enable sound activity detector if needed */ + if (pFilterConfig->SoundActivity.Activation == ENABLE) + { + hmdf->Instance->SADCR |= MDF_SADCR_SADEN; + } + + /* Enable filter */ + hmdf->Instance->DFLTCR |= MDF_DFLTCR_DFLTEN; +} + +/** + * @brief This function handles DMA transfer complete callback. + * @param hdma DMA handle. + * @retval None. + */ +static void MDF_DmaXferCpltCallback(DMA_HandleTypeDef *hdma) +{ + MDF_HandleTypeDef *hmdf = (MDF_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Check if DMA in circular mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + hmdf->State = HAL_MDF_STATE_READY; + } + +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->AcqCpltCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_AcqCpltCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +} + +/** + * @brief This function handles DMA half transfer complete callback. + * @param hdma DMA handle. + * @retval None. + */ +static void MDF_DmaXferHalfCpltCallback(DMA_HandleTypeDef *hdma) +{ + MDF_HandleTypeDef *hmdf = (MDF_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->AcqHalfCpltCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_AcqHalfCpltCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +} + +/** + * @brief This function handles DMA error callback. + * @param hdma DMA handle. + * @retval None. + */ +static void MDF_DmaErrorCallback(DMA_HandleTypeDef *hdma) +{ + MDF_HandleTypeDef *hmdf = (MDF_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update error code */ + hmdf->ErrorCode |= MDF_ERROR_DMA; + +#if (USE_HAL_MDF_REGISTER_CALLBACKS == 1) + hmdf->ErrorCallback(hmdf); +#else /* USE_HAL_MDF_REGISTER_CALLBACKS */ + HAL_MDF_ErrorCallback(hmdf); +#endif /* USE_HAL_MDF_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_MDF_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdios.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdios.c new file mode 100644 index 000000000..9e34bde20 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mdios.c @@ -0,0 +1,921 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mdios.c + * @author MCD Application Team + * @brief MDIOS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the MDIOS Peripheral. + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The MDIOS HAL driver can be used as follow: + + (#) Declare a MDIOS_HandleTypeDef handle structure. + + (#) Initialize the MDIOS low level resources by implementing the HAL_MDIOS_MspInit() API: + (##) Enable the MDIOS interface clock. + (##) MDIOS pins configuration: + (+++) Enable clocks for the MDIOS GPIOs. + (+++) Configure the MDIOS pins as alternate function. + (##) NVIC configuration if you need to use interrupt process: + (+++) Configure the MDIOS interrupt priority. + (+++) Enable the NVIC MDIOS IRQ handle. + + (#) Program the Port Address and the Preamble Check in the Init structure. + + (#) Initialize the MDIOS registers by calling the HAL_MDIOS_Init() API. + + (#) Perform direct slave read/write operations using the following APIs: + (##) Read the value of a DINn register: HAL_MDIOS_ReadReg() + (##) Write a value to a DOUTn register: HAL_MDIOS_WriteReg() + + (#) Get the Master read/write operations flags using the following APIs: + (##) Bit map of DOUTn registers read by Master: HAL_MDIOS_GetReadRegAddress() + (##) Bit map of DINn registers written by Master : HAL_MDIOS_GetWrittenRegAddress() + + (#) Clear the read/write flags using the following APIs: + (##) Clear read flags of a set of registers: HAL_MDIOS_ClearReadRegAddress() + (##) Clear write flags of a set of registers: HAL_MDIOS_ClearWriteRegAddress() + + (#) Enable interrupts on events using HAL_MDIOS_EnableEvents(), when called + the MDIOS will generate an interrupt in the following cases: + (##) a DINn register written by the Master + (##) a DOUTn register read by the Master + (##) an error occur + + (@) A callback is executed for each generated interrupt, so the driver provide the following + HAL_MDIOS_WriteCpltCallback(), HAL_MDIOS_ReadCpltCallback() and HAL_MDIOS_ErrorCallback() + (@) HAL_MDIOS_IRQHandler() must be called from the MDIOS IRQ Handler, to handle the interrupt + and execute the previous callbacks + + (#) Reset the MDIOS peripheral and all related resources by calling the HAL_MDIOS_DeInit() API. + (##) HAL_MDIOS_MspDeInit() must be implemented to reset low level resources + (GPIO, Clocks, NVIC configuration ...) + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_MDIOS_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_MDIOS_RegisterCallback() to register an interrupt callback. + + Function @ref HAL_MDIOS_RegisterCallback() allows to register following callbacks: + (+) WriteCpltCallback : Write Complete Callback. + (+) ReadCpltCallback : Read Complete Callback. + (+) ErrorCallback : Error Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback : MspDeInit Callback. + + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_MDIOS_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_MDIOS_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) WriteCpltCallback : Write Complete Callback. + (+) ReadCpltCallback : Read Complete Callback. + (+) ErrorCallback : Error Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback : MspDeInit Callback. + + By default, after the HAL_MDIOS_Init and when the state is HAL_MDIOS_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_MDIOS_WriteCpltCallback(), @ref HAL_MDIOS_ReadCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_MDIOS_Init/ @ref HAL_MDIOS_DeInit only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_MDIOS_Init/ @ref HAL_MDIOS_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_MDIOS_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_MDIOS_STATE_READY or HAL_MDIOS_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_MDIOS_RegisterCallback() before calling @ref HAL_MDIOS_DeInit + or HAL_MDIOS_Init function. + + When The compilation define USE_HAL_MDIOS_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined (MDIOS) +/** @defgroup MDIOS MDIOS + * @brief HAL MDIOS module driver + * @{ + */ +#ifdef HAL_MDIOS_MODULE_ENABLED + + + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define MDIOS_PORT_ADDRESS_SHIFT ((uint32_t)8) +#define MDIOS_ALL_REG_FLAG ((uint32_t)0xFFFFFFFFU) +#define MDIOS_ALL_ERRORS_FLAG ((uint32_t)(MDIOS_SR_PERF | MDIOS_SR_SERF | MDIOS_SR_TERF)) + +#define MDIOS_DIN_BASE_ADDR (MDIOS_BASE + 0x100U) +#define MDIOS_DOUT_BASE_ADDR (MDIOS_BASE + 0x180U) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +static void MDIOS_InitCallbacksToDefault(MDIOS_HandleTypeDef *hmdios); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions + * @{ + */ + +/** @defgroup MDIOS_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the MDIOS + (+) The following parameters can be configured: + (++) Port Address + (++) Preamble Check + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the MDIOS according to the specified parameters in + * the MDIOS_InitTypeDef and creates the associated handle . + * @param hmdios: pointer to a MDIOS_HandleTypeDef structure that contains + * the configuration information for MDIOS module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios) +{ + uint32_t tmpcr; + + /* Check the MDIOS handle allocation */ + if (hmdios == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDIOS_ALL_INSTANCE(hmdios->Instance)); + assert_param(IS_MDIOS_PORTADDRESS(hmdios->Init.PortAddress)); + assert_param(IS_MDIOS_PREAMBLECHECK(hmdios->Init.PreambleCheck)); + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + + if (hmdios->State == HAL_MDIOS_STATE_RESET) + { + MDIOS_InitCallbacksToDefault(hmdios); + + if (hmdios->MspInitCallback == NULL) + { + hmdios->MspInitCallback = HAL_MDIOS_MspInit; + } + + /* Init the low level hardware */ + hmdios->MspInitCallback(hmdios); + } + +#else + + if (hmdios->State == HAL_MDIOS_STATE_RESET) + { + /* Init the low level hardware */ + HAL_MDIOS_MspInit(hmdios); + } + +#endif /* (USE_HAL_MDIOS_REGISTER_CALLBACKS) */ + + /* Change the MDIOS state */ + hmdios->State = HAL_MDIOS_STATE_BUSY; + + /* Get the MDIOS CR value */ + tmpcr = hmdios->Instance->CR; + + /* Clear PORT_ADDRESS, DPC and EN bits */ + tmpcr &= ((uint32_t)~(MDIOS_CR_EN | MDIOS_CR_DPC | MDIOS_CR_PORT_ADDRESS)); + + /* Set MDIOS control parameters and enable the peripheral */ + tmpcr |= (uint32_t)(((hmdios->Init.PortAddress) << MDIOS_PORT_ADDRESS_SHIFT) | \ + (hmdios->Init.PreambleCheck) | \ + (MDIOS_CR_EN)); + + /* Write the MDIOS CR */ + hmdios->Instance->CR = tmpcr; + + hmdios->ErrorCode = HAL_MDIOS_ERROR_NONE; + + /* Change the MDIOS state */ + hmdios->State = HAL_MDIOS_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + /* Return function status */ + return HAL_OK; + +} + +/** + * @brief DeInitializes the MDIOS peripheral. + * @param hmdios: MDIOS handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios) +{ + /* Check the MDIOS handle allocation */ + if (hmdios == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDIOS_ALL_INSTANCE(hmdios->Instance)); + + /* Change the MDIOS state */ + hmdios->State = HAL_MDIOS_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_MDIOS_DISABLE(hmdios); + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + + if (hmdios->MspDeInitCallback == NULL) + { + hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit; + } + /* DeInit the low level hardware */ + hmdios->MspDeInitCallback(hmdios); +#else + + /* DeInit the low level hardware */ + HAL_MDIOS_MspDeInit(hmdios); + +#endif /* (USE_HAL_MDIOS_REGISTER_CALLBACKS) */ + + /* Change the MDIOS state */ + hmdios->State = HAL_MDIOS_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief MDIOS MSP Init + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MDIOS_MspInit can be implemented in the user file + */ +} + +/** + * @brief MDIOS MSP DeInit + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MDIOS_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User MDIOS Callback + * To be used instead of the weak predefined callback + * @param hmdios mdios handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_MDIOS_WRITE_COMPLETE_CB_ID Write Complete Callback ID + * @arg @ref HAL_MDIOS_READ_COMPLETE_CB_ID Read Complete Callback ID + * @arg @ref HAL_MDIOS_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_MDIOS_WAKEUP_CB_ID Wake Up Callback ID + * @arg @ref HAL_MDIOS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_MDIOS_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_MDIOS_RegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID, + pMDIOS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hmdios); + + if (hmdios->State == HAL_MDIOS_STATE_READY) + { + switch (CallbackID) + { + case HAL_MDIOS_WRITE_COMPLETE_CB_ID : + hmdios->WriteCpltCallback = pCallback; + break; + + case HAL_MDIOS_READ_COMPLETE_CB_ID : + hmdios->ReadCpltCallback = pCallback; + break; + + case HAL_MDIOS_ERROR_CB_ID : + hmdios->ErrorCallback = pCallback; + break; + + case HAL_MDIOS_WAKEUP_CB_ID : + hmdios->WakeUpCallback = pCallback; + break; + + case HAL_MDIOS_MSPINIT_CB_ID : + hmdios->MspInitCallback = pCallback; + break; + + case HAL_MDIOS_MSPDEINIT_CB_ID : + hmdios->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hmdios->State == HAL_MDIOS_STATE_RESET) + { + switch (CallbackID) + { + case HAL_MDIOS_MSPINIT_CB_ID : + hmdios->MspInitCallback = pCallback; + break; + + case HAL_MDIOS_MSPDEINIT_CB_ID : + hmdios->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + return status; +} + +/** + * @brief Unregister an MDIOS Callback + * MDIOS callback is redirected to the weak predefined callback + * @param hmdios mdios handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_MDIOS_WRITE_COMPLETE_CB_ID Write Complete Callback ID + * @arg @ref HAL_MDIOS_READ_COMPLETE_CB_ID Read Complete Callback ID + * @arg @ref HAL_MDIOS_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_MDIOS_WAKEUP_CB_ID Wake Up Callback ID + * @arg @ref HAL_MDIOS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_MDIOS_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_MDIOS_UnRegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hmdios); + + if (hmdios->State == HAL_MDIOS_STATE_READY) + { + switch (CallbackID) + { + case HAL_MDIOS_WRITE_COMPLETE_CB_ID : + hmdios->WriteCpltCallback = HAL_MDIOS_WriteCpltCallback; + break; + + case HAL_MDIOS_READ_COMPLETE_CB_ID : + hmdios->ReadCpltCallback = HAL_MDIOS_ReadCpltCallback; + break; + + case HAL_MDIOS_ERROR_CB_ID : + hmdios->ErrorCallback = HAL_MDIOS_ErrorCallback; + break; + + case HAL_MDIOS_WAKEUP_CB_ID : + hmdios->WakeUpCallback = HAL_MDIOS_WakeUpCallback; + break; + + case HAL_MDIOS_MSPINIT_CB_ID : + hmdios->MspInitCallback = HAL_MDIOS_MspInit; + break; + + case HAL_MDIOS_MSPDEINIT_CB_ID : + hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit; + break; + + default : + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hmdios->State == HAL_MDIOS_STATE_RESET) + { + switch (CallbackID) + { + case HAL_MDIOS_MSPINIT_CB_ID : + hmdios->MspInitCallback = HAL_MDIOS_MspInit; + break; + + case HAL_MDIOS_MSPDEINIT_CB_ID : + hmdios->MspDeInitCallback = HAL_MDIOS_MspDeInit; + break; + + default : + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmdios->ErrorCode |= HAL_MDIOS_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + return status; +} +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Functions_Group2 IO operation functions + * @brief MDIOS Read/Write functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the MDIOS + read and write operations. + + (#) APIs that allow to the MDIOS to read/write from/to the + values of one of the DINn/DOUTn registers: + (+) Read the value of a DINn register: HAL_MDIOS_ReadReg() + (+) Write a value to a DOUTn register: HAL_MDIOS_WriteReg() + + (#) APIs that provide if there are some Slave registres have been + read or written by the Master: + (+) DOUTn registers read by Master: HAL_MDIOS_GetReadRegAddress() + (+) DINn registers written by Master : HAL_MDIOS_GetWrittenRegAddress() + + (#) APIs that Clear the read/write flags: + (+) Clear read registers flags: HAL_MDIOS_ClearReadRegAddress() + (+) Clear write registers flags: HAL_MDIOS_ClearWriteRegAddress() + + (#) A set of Callbacks are provided: + (+) HAL_MDIOS_WriteCpltCallback() + (+) HAL_MDIOS_ReadCpltCallback() + (+) HAL_MDIOS_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Writes to an MDIOS output register + * @param hmdios: mdios handle + * @param RegNum: MDIOS output register address + * @param Data: Data to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t Data) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_MDIOS_REGISTER(RegNum)); + + /* Process Locked */ + __HAL_LOCK(hmdios); + + /* Get the addr of output register to be written by the MDIOS */ + tmpreg = MDIOS_DOUT_BASE_ADDR + (4U * RegNum); + + /* Write to DOUTn register */ + *((uint32_t *)tmpreg) = Data; + + /* Process Unlocked */ + __HAL_UNLOCK(hmdios); + + return HAL_OK; +} + +/** + * @brief Reads an MDIOS input register + * @param hmdios: mdios handle + * @param RegNum: MDIOS input register address + * @param pData: pointer to Data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t *pData) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_MDIOS_REGISTER(RegNum)); + + /* Process Locked */ + __HAL_LOCK(hmdios); + + /* Get the addr of input register to be read by the MDIOS */ + tmpreg = MDIOS_DIN_BASE_ADDR + (4U * RegNum); + + /* Read DINn register */ + *pData = (uint16_t)(*((uint32_t *)tmpreg)); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdios); + + return HAL_OK; +} + +/** + * @brief Gets Written registers by MDIO master + * @param hmdios: mdios handle + * @retval bit map of written registers addresses + */ +uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios) +{ + return hmdios->Instance->WRFR; +} + +/** + * @brief Gets Read registers by MDIO master + * @param hmdios: mdios handle + * @retval bit map of read registers addresses + */ +uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios) +{ + return hmdios->Instance->RDFR; +} + +/** + * @brief Clears Write registers flag + * @param hmdios: mdios handle + * @param RegNum: registers addresses to be cleared + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum) +{ + /* Check the parameters */ + assert_param(IS_MDIOS_REGISTER(RegNum)); + + /* Process Locked */ + __HAL_LOCK(hmdios); + + /* Clear write registers flags */ + hmdios->Instance->CWRFR |= (RegNum); + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + return HAL_OK; +} + +/** + * @brief Clears Read register flag + * @param hmdios: mdios handle + * @param RegNum: registers addresses to be cleared + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum) +{ + /* Check the parameters */ + assert_param(IS_MDIOS_REGISTER(RegNum)); + + /* Process Locked */ + __HAL_LOCK(hmdios); + + /* Clear read registers flags */ + hmdios->Instance->CRDFR |= (RegNum); + + /* Release Lock */ + __HAL_UNLOCK(hmdios); + + return HAL_OK; +} + +/** + * @brief Enables Events for MDIOS peripheral + * @param hmdios: mdios handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios) +{ + /* Process Locked */ + __HAL_LOCK(hmdios); + + /* Enable MDIOS interrupts: Register Write, Register Read and Error ITs */ + __HAL_MDIOS_ENABLE_IT(hmdios, (MDIOS_IT_WRITE | MDIOS_IT_READ | MDIOS_IT_ERROR)); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdios); + + return HAL_OK; +} + +/** + * @brief This function handles MDIOS interrupt request. + * @param hmdios: MDIOS handle + * @retval None + */ +void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios) +{ + /* Write Register Interrupt enabled ? */ + if (__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_WRITE) != (uint32_t)RESET) + { + /* Write register flag */ + if (HAL_MDIOS_GetWrittenRegAddress(hmdios) != (uint32_t)RESET) + { +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + /*Call registered Write complete callback*/ + hmdios->WriteCpltCallback(hmdios); +#else + /* Write callback function */ + HAL_MDIOS_WriteCpltCallback(hmdios); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + + /* Clear write register flag */ + hmdios->Instance->CWRFR |= MDIOS_ALL_REG_FLAG; + } + } + + /* Read Register Interrupt enabled ? */ + if (__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_READ) != (uint32_t)RESET) + { + /* Read register flag */ + if (HAL_MDIOS_GetReadRegAddress(hmdios) != (uint32_t)RESET) + { +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + /*Call registered Read complete callback*/ + hmdios->ReadCpltCallback(hmdios); +#else + /* Read callback function */ + HAL_MDIOS_ReadCpltCallback(hmdios); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + + /* Clear read register flag */ + hmdios->Instance->CRDFR |= MDIOS_ALL_REG_FLAG; + } + } + + /* Error Interrupt enabled ? */ + if (__HAL_MDIOS_GET_IT_SOURCE(hmdios, MDIOS_IT_ERROR) != (uint32_t)RESET) + { + /* All Errors Flag */ + if (__HAL_MDIOS_GET_ERROR_FLAG(hmdios, MDIOS_ALL_ERRORS_FLAG) != (uint32_t)RESET) + { + hmdios->ErrorCode |= HAL_MDIOS_ERROR_DATA; + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + /*Call registered Error callback*/ + hmdios->ErrorCallback(hmdios); +#else + /* Error Callback */ + HAL_MDIOS_ErrorCallback(hmdios); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + + /* Clear errors flag */ + __HAL_MDIOS_CLEAR_ERROR_FLAG(hmdios, MDIOS_ALL_ERRORS_FLAG); + } + hmdios->ErrorCode = HAL_MDIOS_ERROR_NONE; + } + /* check MDIOS WAKEUP exti flag */ + if (__HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(MDIOS_WAKEUP_EXTI_LINE) != (uint32_t)RESET) + { + /* Clear MDIOS WAKEUP Exti pending bit */ + __HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(MDIOS_WAKEUP_EXTI_LINE); +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) + /*Call registered WakeUp callback*/ + hmdios->WakeUpCallback(hmdios); +#else + /* MDIOS WAKEUP callback */ + HAL_MDIOS_WakeUpCallback(hmdios); +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + } + +} + +/** + * @brief Write Complete Callback + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MDIOS_WriteCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Read Complete Callback + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MDIOS_ReadCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Error Callback + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MDIOS_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief MDIOS WAKEUP interrupt callback + * @param hmdios: mdios handle + * @retval None + */ +__weak void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdios); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MDIOS_WakeUpCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Functions_Group3 Peripheral Control functions + * @brief MDIOS control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the MDIOS. + (+) HAL_MDIOS_GetState() API, helpful to check in run-time the state. + (+) HAL_MDIOS_GetError() API, returns the errors code of the HAL state machine. + +@endverbatim + * @{ + */ + +/** + * @brief Gets MDIOS error code + * @param hmdios: mdios handle + * @retval mdios error code + */ +uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios) +{ + /* return the error code */ + return hmdios->ErrorCode; +} + +/** + * @brief Return the MDIOS HAL state + * @param hmdios: mdios handle + * @retval HAL state + */ +HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios) +{ + /* Return MDIOS state */ + return hmdios->State; +} + +/** + * @} + */ + +/** + * @} + */ + +#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1) +static void MDIOS_InitCallbacksToDefault(MDIOS_HandleTypeDef *hmdios) +{ + /* Init the MDIOS Callback settings */ + hmdios->WriteCpltCallback = HAL_MDIOS_WriteCpltCallback; /* Legacy weak WriteCpltCallback */ + hmdios->ReadCpltCallback = HAL_MDIOS_ReadCpltCallback; /* Legacy weak ReadCpltCallback */ + hmdios->ErrorCallback = HAL_MDIOS_ErrorCallback; /* Legacy weak ErrorCallback */ + hmdios->WakeUpCallback = HAL_MDIOS_WakeUpCallback; /* Legacy weak WakeUpCallback */ +} +#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */ + +/** + * @} + */ +#endif /* HAL_MDIOS_MODULE_ENABLED */ +/** + * @} + */ +#endif /* MDIOS */ +/** + * @} + */ \ No newline at end of file diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc.c new file mode 100644 index 000000000..874060e3d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc.c @@ -0,0 +1,5890 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mmc.c + * @author MCD Application Team + * @brief MMC card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (MMC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + MMC card Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by + the user in HAL_MMC_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDMMC memories which uses the HAL + SDMMC driver functions to interface with MMC and eMMC cards devices. + It is used as follows: + + (#)Initialize the SDMMC low level resources by implement the HAL_MMC_MspInit() API: + (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE(); + (##) SDMMC pins configuration for MMC card + (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) NVIC configuration if you need to use interrupt process (HAL_MMC_ReadBlocks_IT() + and HAL_MMC_WriteBlocks_IT() APIs). + (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority(); + (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT() + and __HAL_MMC_DISABLE_IT() inside the communication process. + (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT() + and __HAL_MMC_CLEAR_IT() + (##) No general propose DMA Configuration is needed, an Internal DMA for SDMMC Peripheral are used. + + (#) At this stage, you can perform MMC read/write/erase operations after MMC card initialization + + *** MMC Card Initialization and configuration *** + ================================================ + [..] + To initialize the MMC Card, use the HAL_MMC_Init() function. It Initializes + SDMMC Peripheral (STM32 side) and the MMC Card, and put it into StandBy State (Ready for data transfer). + This function provide the following operations: + + (#) Initialize the SDMMC peripheral interface with default configuration. + The initialization process is done at 400KHz. You can change or adapt + this frequency by adjusting the "ClockDiv" field. + The MMC Card frequency (SDMMC_CK) is computed as follows: + + SDMMC_CK = SDMMCCLK / (2 * ClockDiv) + + In initialization mode and according to the MMC Card standard, + make sure that the SDMMC_CK frequency doesn't exceed 400KHz. + + This phase of initialization is done through SDMMC_Init() and + SDMMC_PowerState_ON() SDMMC low level APIs. + + (#) Initialize the MMC card. The API used is HAL_MMC_InitCard(). + This phase allows the card initialization and identification + and check the MMC Card type (Standard Capacity or High Capacity) + The initialization flow is compatible with MMC standard. + + This API (HAL_MMC_InitCard()) could be used also to reinitialize the card in case + of plug-off plug-in. + + (#) Configure the MMC Card Data transfer frequency. By Default, the card transfer + frequency by adjusting the "ClockDiv" field. + In transfer mode and according to the MMC Card standard, make sure that the + SDMMC_CK frequency doesn't exceed 25MHz and 100MHz in High-speed mode switch. + + (#) Select the corresponding MMC Card according to the address read with the step 2. + + (#) Configure the MMC Card in wide bus mode: 4-bits data. + (#) Select the MMC Card partition using HAL_MMC_SwitchPartition() + + *** MMC Card Read operation *** + ============================== + [..] + (+) You can read from MMC card in polling mode by using function HAL_MMC_ReadBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + + (+) You can read from MMC card in DMA mode by using function HAL_MMC_ReadBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the DMA transfer process through the MMC Rx interrupt event. + + (+) You can read from MMC card in Interrupt mode by using function HAL_MMC_ReadBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the IT transfer process through the MMC Rx interrupt event. + + *** MMC Card Write operation *** + =============================== + [..] + (+) You can write to MMC card in polling mode by using function HAL_MMC_WriteBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + + (+) You can write to MMC card in DMA mode by using function HAL_MMC_WriteBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 byte). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the DMA transfer process through the MMC Tx interrupt event. + + (+) You can write to MMC card in Interrupt mode by using function HAL_MMC_WriteBlocks_IT(). + This function allows the read of 512 bytes blocks. + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetCardState() function for MMC card state. + You could also check the IT transfer process through the MMC Tx interrupt event. + + *** MMC card information *** + =========================== + [..] + (+) To get MMC card information, you can use the function HAL_MMC_GetCardInfo(). + It returns useful information about the MMC card such as block size, card type, + block number ... + + *** MMC card CSD register *** + ============================ + [..] + (+) The HAL_MMC_GetCardCSD() API allows to get the parameters of the CSD register. + Some of the CSD parameters are useful for card initialization and identification. + + *** MMC card CID register *** + ============================ + [..] + (+) The HAL_MMC_GetCardCID() API allows to get the parameters of the CID register. + Some of the CID parameters are useful for card initialization and identification. + + *** MMC Card Reply Protected Memory Block (RPMB) Key Programming operation *** + ============================== + [..] + (+) You can program the authentication key of RPMB area in polling mode by using function + HAL_MMC_RPMB_ProgramAuthenticationKey(). + This function is only used once during the life of an MMC card. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for operation state. + (+) You can program the authentication key of RPMB area in Interrupt mode by using function + HAL_MMC_RPMB_ProgramAuthenticationKey_IT(). + This function is only used once during the life of an MMC card. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for operation state. + + *** MMC Card Reply Protected Memory Block (RPMB) write counter operation *** + ============================== + [..] + (+) You can get the write counter value of RPMB area in polling mode by using function + HAL_MMC_RPMB_GetWriteCounter(). + (+) You can get the write counter value of RPMB area in Interrupt mode by using function + HAL_MMC_RPMB_GetWriteCounter_IT(). + + *** MMC Card Reply Protected Memory Block (RPMB) write operation *** + ============================== + [..] + (+) You can write to the RPMB area of MMC card in polling mode by using function + HAL_MMC_WriteBlocks(). + This function supports the one, two, or thirty two blocks write operation + (with 512-bytes block length). + You can choose the number of blocks at the multiple block read operation by adjusting + the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for operation state. + (+) You can write to the RPMB area of MMC card in Interrupt mode by using function + HAL_MMC_WriteBlocks_IT(). + This function supports the one, two, or thirty two blocks write operation + (with 512-bytes block length). + You can choose the number of blocks at the multiple block read operation by adjusting + the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for operation state. + + *** MMC Card Reply Protected Memory Block (RPMB) read operation *** + ============================== + [..] + (+) You can read from the RPMB area of MMC card in polling mode by using function + HAL_MMC_RPMB_ReadBlocks(). + The block size should be chosen as multiple of 512 bytes. + You can choose the number of blocks by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for MMC card state. + (+) You can read from the RPMB area of MMC card in Interrupt mode by using function + HAL_MMC_RPMB_ReadBlocks_IT(). + The block size should be chosen as multiple of 512 bytes. + You can choose the number of blocks by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_MMC_GetRPMBError() function for MMC card state. + + *** MMC HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in MMC HAL driver. + + (+) __HAL_MMC_ENABLE_IT: Enable the MMC device interrupt + (+) __HAL_MMC_DISABLE_IT: Disable the MMC device interrupt + (+) __HAL_MMC_GET_FLAG:Check whether the specified MMC flag is set or not + (+) __HAL_MMC_CLEAR_FLAG: Clear the MMC's pending flags + + [..] + (@) You can refer to the MMC HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_MMC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_MMC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMALnkLstBufCpltCallback : callback when the DMA reception of linked list node buffer is completed. + (+) Write_DMALnkLstBufCpltCallback : callback when the DMA transmission of linked list node buffer is completed. + (+) MspInitCallback : MMC MspInit. + (+) MspDeInitCallback : MMC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_MMC_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : MMC MspInit. + (+) MspDeInitCallback : MMC MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_MMC_Init + and HAL_MMC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_MMC_Init and HAL_MMC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_MMC_RegisterCallback before calling HAL_MMC_DeInit + or HAL_MMC_Init function. + + When The compilation define USE_HAL_MMC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup MMC MMC + * @brief MMC HAL module driver + * @{ + */ + +#if defined (SDMMC1) || defined (SDMMC2) +#ifdef HAL_MMC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup MMC_Private_Defines + * @{ + */ +#if defined (VDD_VALUE) && (VDD_VALUE <= 1950U) +#define MMC_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define MMC_EXT_CSD_PWR_CL_26_INDEX 201 +#define MMC_EXT_CSD_PWR_CL_52_INDEX 200 +#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 238 + +#define MMC_EXT_CSD_PWR_CL_26_POS 8 +#define MMC_EXT_CSD_PWR_CL_52_POS 0 +#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 16 +#else +#define MMC_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE + +#define MMC_EXT_CSD_PWR_CL_26_INDEX 203 +#define MMC_EXT_CSD_PWR_CL_52_INDEX 202 +#define MMC_EXT_CSD_PWR_CL_DDR_52_INDEX 239 + +#define MMC_EXT_CSD_PWR_CL_26_POS 24 +#define MMC_EXT_CSD_PWR_CL_52_POS 16 +#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 24 +#endif /* (VDD_VALUE) && (VDD_VALUE <= 1950U)*/ + +#define MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_INDEX 216 +#define MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_POS 0 +#define MMC_EXT_CSD_S_A_TIMEOUT_INDEX 217 +#define MMC_EXT_CSD_S_A_TIMEOUT_POS 8 + +/* Frequencies used in the driver for clock divider calculation */ +#define MMC_INIT_FREQ 400000U /* Initialization phase : 400 kHz max */ +#define MMC_HIGH_SPEED_FREQ 52000000U /* High speed phase : 52 MHz max */ + +/* The Data elements' postitions in the frame Frame for RPMB area */ +#define MMC_RPMB_KEYMAC_POSITION 196U +#define MMC_RPMB_DATA_POSITION 228U +#define MMC_RPMB_NONCE_POSITION 484U +#define MMC_RPMB_WRITE_COUNTER_POSITION 500U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Functions MMC Private Functions + * @{ + */ +static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus); +static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc); +static void MMC_Write_IT(MMC_HandleTypeDef *hmmc); +static void MMC_Read_IT(MMC_HandleTypeDef *hmmc); +static uint32_t MMC_HighSpeed(MMC_HandleTypeDef *hmmc, FunctionalState state); +static uint32_t MMC_DDR_Mode(MMC_HandleTypeDef *hmmc, FunctionalState state); +static HAL_StatusTypeDef MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, uint16_t FieldIndex, + uint32_t Timeout); +static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide, uint32_t Speed); + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup MMC_Exported_Functions + * @{ + */ + +/** @addtogroup MMC_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the MMC + card device to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the MMC according to the specified parameters in the + MMC_HandleTypeDef and create the associated handle. + * @param hmmc Pointer to the MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc) +{ + /* Check the MMC handle allocation */ + if (hmmc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hmmc->Instance)); + assert_param(IS_SDMMC_CLOCK_EDGE(hmmc->Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(hmmc->Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(hmmc->Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(hmmc->Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(hmmc->Init.ClockDiv)); + + if (hmmc->State == HAL_MMC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hmmc->Lock = HAL_UNLOCKED; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_MMC_STATE_RESET only */ + hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback; + hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback; + hmmc->ErrorCallback = HAL_MMC_ErrorCallback; + hmmc->AbortCpltCallback = HAL_MMC_AbortCallback; + hmmc->Read_DMALnkLstBufCpltCallback = HAL_MMCEx_Read_DMALnkLstBufCpltCallback; + hmmc->Write_DMALnkLstBufCpltCallback = HAL_MMCEx_Write_DMALnkLstBufCpltCallback; + + if (hmmc->MspInitCallback == NULL) + { + hmmc->MspInitCallback = HAL_MMC_MspInit; + } + + /* Init the low level hardware */ + hmmc->MspInitCallback(hmmc); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_MMC_MspInit(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize the Card parameters */ + if (HAL_MMC_InitCard(hmmc) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Initialize the error code */ + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the MMC operation */ + hmmc->Context = MMC_CONTEXT_NONE; + + /* Initialize the MMC state */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Configure bus width */ + if (hmmc->Init.BusWide != SDMMC_BUS_WIDE_1B) + { + if (HAL_MMC_ConfigWideBusOperation(hmmc, hmmc->Init.BusWide) != HAL_OK) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the MMC Card. + * @param hmmc Pointer to MMC handle + * @note This function initializes the MMC card. It could be used when a card + re-initialization is needed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + MMC_InitTypeDef Init; + uint32_t sdmmc_clk; + + /* Default SDMMC peripheral configuration for MMC card initialization */ + Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = SDMMC_BUS_WIDE_1B; + Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + + /* Init Clock should be less or equal to 400Khz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC12); + if (sdmmc_clk == 0U) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode = SDMMC_ERROR_INVALID_PARAMETER; + return HAL_ERROR; + } + Init.ClockDiv = sdmmc_clk / (2U * MMC_INIT_FREQ); + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = SDMMC_TRANSCEIVER_NOT_PRESENT; +#endif /* USE_SD_TRANSCEIVER */ + + /* Initialize SDMMC peripheral interface with default configuration */ + (void)SDMMC_Init(hmmc->Instance, Init); + + /* Set Power State to ON */ + (void)SDMMC_PowerState_ON(hmmc->Instance); + + /* wait 74 Cycles: required power up waiting time before starting + the MMC initialization sequence */ + if (Init.ClockDiv != 0U) + { + sdmmc_clk = sdmmc_clk / (2U * Init.ClockDiv); + } + + if (sdmmc_clk != 0U) + { + HAL_Delay(1U + (74U * 1000U / (sdmmc_clk))); + } + + /* Identify card operating voltage */ + errorstate = MMC_PowerON(hmmc); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Card initialization */ + errorstate = MMC_InitCard(hmmc); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief De-Initializes the MMC card. + * @param hmmc Pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_DeInit(MMC_HandleTypeDef *hmmc) +{ + /* Check the MMC handle allocation */ + if (hmmc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hmmc->Instance)); + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Set MMC power state to off */ + MMC_PowerOFF(hmmc); + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + if (hmmc->MspDeInitCallback == NULL) + { + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + } + + /* DeInit the low level hardware */ + hmmc->MspDeInitCallback(hmmc); +#else + /* De-Initialize the MSP layer */ + HAL_MMC_MspDeInit(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the MMC MSP. + * @param hmmc Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MMC_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize MMC MSP. + * @param hmmc Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MMC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup MMC_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to MMC card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param pData pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of MMC blocks to read + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, + uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) + & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Read block(s) in polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = MMC_CONTEXT_READ_SINGLE_BLOCK; + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Send stop transmission command in case of multiblock read */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param pData pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of MMC blocks to write + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + const uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = MMC_CONTEXT_WRITE_SINGLE_BLOCK; + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*tempbuff); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 8U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 16U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 24U); + tempbuff++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Send stop transmission command in case of multiblock write */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the IT transfer process through the MMC Rx + * interrupt event. + * @param hmmc Pointer to MMC handle + * @param pData Pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pRxBuffPtr = pData; + hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Read Blocks in IT mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_IT); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_IT); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_RXFIFOHF)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the IT transfer process through the MMC Tx + * interrupt event. + * @param hmmc Pointer to MMC handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, const uint8_t *pData, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pTxBuffPtr = pData; + hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_IT); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_IT); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_TXFIFOHE)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the DMA transfer process through the MMC Rx + * interrupt event. + * @param hmmc Pointer MMC handle + * @param pData Pointer to the buffer that will contain the received data + * @param BlockAdd Block Address from where data is to be read + * @param NumberOfBlocks Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_DMA_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pRxBuffPtr = pData; + hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + hmmc->Instance->IDMABASER = (uint32_t) pData ; + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Read Blocks in DMA mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_DMA); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode = errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @note You could also check the DMA transfer process through the MMC Tx + * interrupt event. + * @param hmmc Pointer to MMC handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, const uint8_t *pData, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + hmmc->pTxBuffPtr = pData; + hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= MMC_BLOCKSIZE; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + hmmc->Instance->IDMABASER = (uint32_t) pData ; + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + } + else + { + hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_DMA); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add); + } + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Erases the specified memory area of the given MMC card. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param BlockStartAdd: Start Block address + * @param BlockEndAdd: End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + if (end_add < start_add) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (end_add > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) + & 0x000000FFU) != 0x0U) + { + if (((start_add % 8U) != 0U) || ((end_add % 8U) != 0U)) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check if the card command class supports erase command */ + if (((hmmc->MmcCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + if ((SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + start_add *= MMC_BLOCKSIZE; + end_add *= MMC_BLOCKSIZE; + } + + /* Send CMD35 MMC_ERASE_GRP_START with argument as addr */ + errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD36 MMC_ERASE_GRP_END with argument as addr */ + errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD38 ERASE */ + errorstate = SDMMC_CmdErase(hmmc->Instance, 0UL); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles MMC card interrupt request. + * @param hmmc Pointer to MMC handle + * @retval None + */ +void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t context = hmmc->Context; + + /* Check for SDMMC interrupt flags */ + if ((__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) != RESET) && ((context & MMC_CONTEXT_IT) != 0U)) + { + MMC_Read_IT(hmmc); + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND) != RESET) + { + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_DATAEND); + + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR | SDMMC_IT_TXFIFOHE | \ + SDMMC_IT_RXFIFOHF); + + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_IDMABTC); + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + if ((context & MMC_CONTEXT_DMA) != 0U) + { + hmmc->Instance->DLEN = 0; + hmmc->Instance->DCTRL = 0; + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA ; + + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + if (((context & MMC_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->TxCpltCallback(hmmc); +#else + HAL_MMC_TxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + if (((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->RxCpltCallback(hmmc); +#else + HAL_MMC_RxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else if ((context & MMC_CONTEXT_IT) != 0U) + { + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + if (((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->RxCpltCallback(hmmc); +#else + HAL_MMC_RxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->TxCpltCallback(hmmc); +#else + HAL_MMC_TxCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if ((__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) != RESET) && ((context & MMC_CONTEXT_IT) != 0U)) + { + MMC_Write_IT(hmmc); + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL | + SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_RXOVERR | SDMMC_FLAG_TXUNDERR) != RESET) + { + /* Set Error code */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_DCRCFAIL) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_DTIMEOUT) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_RXOVERR) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + } + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_IT_TXUNDERR) != RESET) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + } + + /* Clear All flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + /* Disable all interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + hmmc->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + hmmc->Instance->CMD |= SDMMC_CMD_CMDSTOP; + hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance); + hmmc->Instance->CMD &= ~(SDMMC_CMD_CMDSTOP); + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_DABORT); + + if ((context & MMC_CONTEXT_IT) != 0U) + { + /* Set the MMC state to ready to be able to start again the process */ + hmmc->State = HAL_MMC_STATE_READY; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else if ((context & MMC_CONTEXT_DMA) != 0U) + { + if (hmmc->ErrorCode != HAL_MMC_ERROR_NONE) + { + /* Disable Internal DMA */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_IDMABTC); + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Set the MMC state to ready to be able to start again the process */ + hmmc->State = HAL_MMC_STATE_READY; +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->ErrorCallback(hmmc); +#else + HAL_MMC_ErrorCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_IDMABTC) != RESET) + { + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_IT_IDMABTC); + + if ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Write_DMALnkLstBufCpltCallback(hmmc); +#else + HAL_MMCEx_Write_DMALnkLstBufCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + else /* MMC_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->Read_DMALnkLstBufCpltCallback(hmmc); +#else + HAL_MMCEx_Read_DMALnkLstBufCpltCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + } + + else + { + /* Nothing to do */ + } +} + +/** + * @brief return the MMC state + * @param hmmc Pointer to mmc handle + * @retval HAL state + */ +HAL_MMC_StateTypeDef HAL_MMC_GetState(const MMC_HandleTypeDef *hmmc) +{ + return hmmc->State; +} + +/** + * @brief Return the MMC error code + * @param hmmc : Pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval MMC Error Code + */ +uint32_t HAL_MMC_GetError(const MMC_HandleTypeDef *hmmc) +{ + return hmmc->ErrorCode; +} + +/** + * @brief Tx Transfer completed callbacks + * @param hmmc Pointer to MMC handle + * @retval None + */ +__weak void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hmmc Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief MMC error callbacks + * @param hmmc Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief MMC Abort callbacks + * @param hmmc Pointer MMC handle + * @retval None + */ +__weak void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMC_AbortCallback can be implemented in the user file + */ +} + +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User MMC Callback + * To be used instead of the weak (overridden) predefined callback + * @note The HAL_MMC_RegisterCallback() may be called before HAL_MMC_Init() in + * HAL_MMC_STATE_RESET to register callbacks for HAL_MMC_MSP_INIT_CB_ID + * and HAL_MMC_MSP_DEINIT_CB_ID. + * @param hmmc : MMC handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID + * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID + * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID + * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID + * @arg @ref HAL_MMC_READ_DMA_LNKLST_BUF_CPLT_CB_ID MMC DMA Rx Linked List Node buffer Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID MMC DMA Tx Linked List Node buffer Callback ID + * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID + * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_MMC_RegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, + pMMC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + switch (CallbackId) + { + case HAL_MMC_TX_CPLT_CB_ID : + hmmc->TxCpltCallback = pCallback; + break; + case HAL_MMC_RX_CPLT_CB_ID : + hmmc->RxCpltCallback = pCallback; + break; + case HAL_MMC_ERROR_CB_ID : + hmmc->ErrorCallback = pCallback; + break; + case HAL_MMC_ABORT_CB_ID : + hmmc->AbortCpltCallback = pCallback; + break; + case HAL_MMC_READ_DMA_LNKLST_BUF_CPLT_CB_ID : + hmmc->Read_DMALnkLstBufCpltCallback = pCallback; + break; + case HAL_MMC_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID : + hmmc->Write_DMALnkLstBufCpltCallback = pCallback; + break; + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = pCallback; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hmmc->State == HAL_MMC_STATE_RESET) + { + switch (CallbackId) + { + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = pCallback; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User MMC Callback + * MMC Callback is redirected to the weak (overridden) predefined callback + * @note The HAL_MMC_UnRegisterCallback() may be called before HAL_MMC_Init() in + * HAL_MMC_STATE_RESET to register callbacks for HAL_MMC_MSP_INIT_CB_ID + * and HAL_MMC_MSP_DEINIT_CB_ID. + * @param hmmc : MMC handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID + * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID + * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID + * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID + * @arg @ref HAL_MMC_READ_DMA_LNKLST_BUF_CPLT_CB_ID MMC DMA Rx Linked List Node buffer Callback ID + * @arg @ref HAL_MMC_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID MMC DMA Tx Linked List Node buffer Callback ID + * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID + * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + switch (CallbackId) + { + case HAL_MMC_TX_CPLT_CB_ID : + hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback; + break; + case HAL_MMC_RX_CPLT_CB_ID : + hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback; + break; + case HAL_MMC_ERROR_CB_ID : + hmmc->ErrorCallback = HAL_MMC_ErrorCallback; + break; + case HAL_MMC_ABORT_CB_ID : + hmmc->AbortCpltCallback = HAL_MMC_AbortCallback; + break; + case HAL_MMC_READ_DMA_LNKLST_BUF_CPLT_CB_ID : + hmmc->Read_DMALnkLstBufCpltCallback = HAL_MMCEx_Read_DMALnkLstBufCpltCallback; + break; + case HAL_MMC_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID : + hmmc->Write_DMALnkLstBufCpltCallback = HAL_MMCEx_Write_DMALnkLstBufCpltCallback; + break; + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = HAL_MMC_MspInit; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hmmc->State == HAL_MMC_STATE_RESET) + { + switch (CallbackId) + { + case HAL_MMC_MSP_INIT_CB_ID : + hmmc->MspInitCallback = HAL_MMC_MspInit; + break; + case HAL_MMC_MSP_DEINIT_CB_ID : + hmmc->MspDeInitCallback = HAL_MMC_MspDeInit; + break; + default : + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup MMC_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the MMC card + operations and get the related information + +@endverbatim + * @{ + */ + +/** + * @brief Returns information the information of the card which are stored on + * the CID register. + * @param hmmc Pointer to MMC handle + * @param pCID: Pointer to a HAL_MMC_CIDTypedef structure that + * contains all CID register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID) +{ + pCID->ManufacturerID = (uint8_t)((hmmc->CID[0] & 0xFF000000U) >> 24U); + + pCID->OEM_AppliID = (uint16_t)((hmmc->CID[0] & 0x00FFFF00U) >> 8U); + + pCID->ProdName1 = (((hmmc->CID[0] & 0x000000FFU) << 24U) | ((hmmc->CID[1] & 0xFFFFFF00U) >> 8U)); + + pCID->ProdName2 = (uint8_t)(hmmc->CID[1] & 0x000000FFU); + + pCID->ProdRev = (uint8_t)((hmmc->CID[2] & 0xFF000000U) >> 24U); + + pCID->ProdSN = (((hmmc->CID[2] & 0x00FFFFFFU) << 8U) | ((hmmc->CID[3] & 0xFF000000U) >> 24U)); + + pCID->Reserved1 = (uint8_t)((hmmc->CID[3] & 0x00F00000U) >> 20U); + + pCID->ManufactDate = (uint16_t)((hmmc->CID[3] & 0x000FFF00U) >> 8U); + + pCID->CID_CRC = (uint8_t)((hmmc->CID[3] & 0x000000FEU) >> 1U); + + pCID->Reserved2 = 1U; + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the CSD register. + * @param hmmc Pointer to MMC handle + * @param pCSD: Pointer to a HAL_MMC_CardCSDTypeDef structure that + * contains all CSD register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD) +{ + uint32_t block_nbr = 0; + + pCSD->CSDStruct = (uint8_t)((hmmc->CSD[0] & 0xC0000000U) >> 30U); + + pCSD->SysSpecVersion = (uint8_t)((hmmc->CSD[0] & 0x3C000000U) >> 26U); + + pCSD->Reserved1 = (uint8_t)((hmmc->CSD[0] & 0x03000000U) >> 24U); + + pCSD->TAAC = (uint8_t)((hmmc->CSD[0] & 0x00FF0000U) >> 16U); + + pCSD->NSAC = (uint8_t)((hmmc->CSD[0] & 0x0000FF00U) >> 8U); + + pCSD->MaxBusClkFrec = (uint8_t)(hmmc->CSD[0] & 0x000000FFU); + + pCSD->CardComdClasses = (uint16_t)((hmmc->CSD[1] & 0xFFF00000U) >> 20U); + + pCSD->RdBlockLen = (uint8_t)((hmmc->CSD[1] & 0x000F0000U) >> 16U); + + pCSD->PartBlockRead = (uint8_t)((hmmc->CSD[1] & 0x00008000U) >> 15U); + + pCSD->WrBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00004000U) >> 14U); + + pCSD->RdBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00002000U) >> 13U); + + pCSD->DSRImpl = (uint8_t)((hmmc->CSD[1] & 0x00001000U) >> 12U); + + pCSD->Reserved2 = 0U; /*!< Reserved */ + + if (MMC_ReadExtCSD(hmmc, &block_nbr, 212, 0x0FFFFFFFU) != HAL_OK) /* Field SEC_COUNT [215:212] */ + { + return HAL_ERROR; + } + + if (hmmc->MmcCard.CardType == MMC_LOW_CAPACITY_CARD) + { + pCSD->DeviceSize = (((hmmc->CSD[1] & 0x000003FFU) << 2U) | ((hmmc->CSD[2] & 0xC0000000U) >> 30U)); + + pCSD->MaxRdCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x38000000U) >> 27U); + + pCSD->MaxRdCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x07000000U) >> 24U); + + pCSD->MaxWrCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x00E00000U) >> 21U); + + pCSD->MaxWrCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x001C0000U) >> 18U); + + pCSD->DeviceSizeMul = (uint8_t)((hmmc->CSD[2] & 0x00038000U) >> 15U); + + hmmc->MmcCard.BlockNbr = (pCSD->DeviceSize + 1U) ; + hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U)); + hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU)); + + hmmc->MmcCard.LogBlockNbr = (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / MMC_BLOCKSIZE); + hmmc->MmcCard.LogBlockSize = MMC_BLOCKSIZE; + } + else if (hmmc->MmcCard.CardType == MMC_HIGH_CAPACITY_CARD) + { + hmmc->MmcCard.BlockNbr = block_nbr; + hmmc->MmcCard.LogBlockNbr = hmmc->MmcCard.BlockNbr; + hmmc->MmcCard.BlockSize = MMC_BLOCKSIZE; + hmmc->MmcCard.LogBlockSize = hmmc->MmcCard.BlockSize; + } + else + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + pCSD->EraseGrSize = (uint8_t)((hmmc->CSD[2] & 0x00004000U) >> 14U); + + pCSD->EraseGrMul = (uint8_t)((hmmc->CSD[2] & 0x00003F80U) >> 7U); + + pCSD->WrProtectGrSize = (uint8_t)(hmmc->CSD[2] & 0x0000007FU); + + pCSD->WrProtectGrEnable = (uint8_t)((hmmc->CSD[3] & 0x80000000U) >> 31U); + + pCSD->ManDeflECC = (uint8_t)((hmmc->CSD[3] & 0x60000000U) >> 29U); + + pCSD->WrSpeedFact = (uint8_t)((hmmc->CSD[3] & 0x1C000000U) >> 26U); + + pCSD->MaxWrBlockLen = (uint8_t)((hmmc->CSD[3] & 0x03C00000U) >> 22U); + + pCSD->WriteBlockPaPartial = (uint8_t)((hmmc->CSD[3] & 0x00200000U) >> 21U); + + pCSD->Reserved3 = 0; + + pCSD->ContentProtectAppli = (uint8_t)((hmmc->CSD[3] & 0x00010000U) >> 16U); + + pCSD->FileFormatGroup = (uint8_t)((hmmc->CSD[3] & 0x00008000U) >> 15U); + + pCSD->CopyFlag = (uint8_t)((hmmc->CSD[3] & 0x00004000U) >> 14U); + + pCSD->PermWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00002000U) >> 13U); + + pCSD->TempWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00001000U) >> 12U); + + pCSD->FileFormat = (uint8_t)((hmmc->CSD[3] & 0x00000C00U) >> 10U); + + pCSD->ECC = (uint8_t)((hmmc->CSD[3] & 0x00000300U) >> 8U); + + pCSD->CSD_CRC = (uint8_t)((hmmc->CSD[3] & 0x000000FEU) >> 1U); + + pCSD->Reserved4 = 1; + + return HAL_OK; +} + +/** + * @brief Gets the MMC card info. + * @param hmmc Pointer to MMC handle + * @param pCardInfo: Pointer to the HAL_MMC_CardInfoTypeDef structure that + * will contain the MMC card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo) +{ + pCardInfo->CardType = (uint32_t)(hmmc->MmcCard.CardType); + pCardInfo->Class = (uint32_t)(hmmc->MmcCard.Class); + pCardInfo->RelCardAdd = (uint32_t)(hmmc->MmcCard.RelCardAdd); + pCardInfo->BlockNbr = (uint32_t)(hmmc->MmcCard.BlockNbr); + pCardInfo->BlockSize = (uint32_t)(hmmc->MmcCard.BlockSize); + pCardInfo->LogBlockNbr = (uint32_t)(hmmc->MmcCard.LogBlockNbr); + pCardInfo->LogBlockSize = (uint32_t)(hmmc->MmcCard.LogBlockSize); + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the Extended CSD register. + * @param hmmc Pointer to MMC handle + * @param pExtCSD Pointer to a memory area (512 bytes) that contains all + * Extended CSD register parameters + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetCardExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pExtCSD, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t *tmp_buf; + + if (NULL == pExtCSD) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + /* Initiaize the destination pointer */ + tmp_buf = pExtCSD; + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Send ExtCSD Read command to Card */ + errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR | + SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + *tmp_buf = SDMMC_ReadFIFO(hmmc->Instance); + tmp_buf++; + } + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + hmmc->State = HAL_MMC_STATE_READY; + } + + return HAL_OK; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hmmc Pointer to MMC handle + * @param WideMode: Specifies the MMC card wide bus mode + * This parameter can be one of the following values: + * @arg SDMMC_BUS_WIDE_8B: 8-bit data transfer + * @arg SDMMC_BUS_WIDE_4B: 4-bit data transfer + * @arg SDMMC_BUS_WIDE_1B: 1-bit data transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode) +{ + uint32_t count; + SDMMC_InitTypeDef Init; + uint32_t errorstate; + uint32_t response = 0U; + + /* Check the parameters */ + assert_param(IS_SDMMC_BUS_WIDE(WideMode)); + + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check and update the power class if needed */ + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_DDR); + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_HIGH); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, WideMode, SDMMC_SPEED_MODE_DEFAULT); + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (WideMode == SDMMC_BUS_WIDE_8B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + } + else if (WideMode == SDMMC_BUS_WIDE_4B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + } + else if (WideMode == SDMMC_BUS_WIDE_1B) + { + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U); + } + else + { + /* WideMode is not a valid argument*/ + errorstate = HAL_MMC_ERROR_PARAM; + } + + /* Check for switch error and violation of the trial number of sending CMD 13 */ + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + else + { + /* Configure the SDMMC peripheral */ + Init = hmmc->Init; + Init.BusWide = WideMode; + (void)SDMMC_Init(hmmc->Instance, Init); + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Configure the speed bus mode + * @param hmmc Pointer to the MMC handle + * @param SpeedMode: Specifies the MMC card speed bus mode + * This parameter can be one of the following values: + * @arg SDMMC_SPEED_MODE_AUTO: Max speed mode supported by the card + * @arg SDMMC_SPEED_MODE_DEFAULT: Default Speed (MMC @ 26MHz) + * @arg SDMMC_SPEED_MODE_HIGH: High Speed (MMC @ 52 MHz) + * @arg SDMMC_SPEED_MODE_DDR: High Speed DDR (MMC DDR @ 52 MHz) + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_MMC_ConfigSpeedBusOperation(MMC_HandleTypeDef *hmmc, uint32_t SpeedMode) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + uint32_t device_type; + uint32_t errorstate; + + /* Check the parameters */ + assert_param(IS_SDMMC_SPEED_MODE(SpeedMode)); + + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Field DEVICE_TYPE [196 = 49*4] of Extended CSD register */ + device_type = (hmmc->Ext_CSD[49] & 0x000000FFU); + + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS) != 0U) && ((device_type & 0x04U) != 0U)) + { + /* High Speed DDR mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + else + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U) + { + /* DDR mode not supported with CLKDIV = 0 */ + errorstate = MMC_DDR_Mode(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + } + } + else if ((device_type & 0x02U) != 0U) + { + /* High Speed mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + else + { + /* Nothing to do : keep current speed */ + } + break; + } + case SDMMC_SPEED_MODE_DDR: + { + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS) != 0U) && ((device_type & 0x04U) != 0U)) + { + /* High Speed DDR mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + else + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U) + { + /* DDR mode not supported with CLKDIV = 0 */ + errorstate = MMC_DDR_Mode(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + } + } + else + { + /* High Speed DDR mode not allowed */ + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((device_type & 0x02U) != 0U) + { + /* High Speed mode allowed */ + errorstate = MMC_HighSpeed(hmmc, ENABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + else + { + /* High Speed mode not allowed */ + hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) + { + /* High Speed DDR mode activated */ + errorstate = MMC_DDR_Mode(hmmc, DISABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) + { + /* High Speed mode activated */ + errorstate = MMC_HighSpeed(hmmc, DISABLE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + } + break; + } + default: + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + status = HAL_ERROR; + break; + } + + /* Verify that MMC card is ready to use after Speed mode switch*/ + tickstart = HAL_GetTick(); + while ((HAL_MMC_GetCardState(hmmc) != HAL_MMC_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + return status; +} + +/** + * @brief Gets the current mmc card data state. + * @param hmmc pointer to MMC handle + * @retval Card state + */ +HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc) +{ + uint32_t cardstate; + uint32_t errorstate; + uint32_t resp1 = 0U; + + errorstate = MMC_SendStatus(hmmc, &resp1); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + cardstate = ((resp1 >> 9U) & 0x0FU); + + return (HAL_MMC_CardStateTypeDef)cardstate; +} + +/** + * @brief Abort the current transfer and disable the MMC. + * @param hmmc pointer to a MMC_HandleTypeDef structure that contains + * the configuration information for MMC module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc) +{ + uint32_t error_code; + uint32_t tickstart; + + if (hmmc->State == HAL_MMC_STATE_BUSY) + { + /* DIsable All interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /*we will send the CMD12 in all cases in order to stop the data transfers*/ + /*In case the data transfer just finished, the external memory will not respond + and will return HAL_MMC_ERROR_CMD_RSP_TIMEOUT*/ + /*In case the data transfer aborted , the external memory will respond and will return HAL_MMC_ERROR_NONE*/ + /*Other scenario will return HAL_ERROR*/ + + hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance); + error_code = hmmc->ErrorCode; + if ((error_code != HAL_MMC_ERROR_NONE) && (error_code != HAL_MMC_ERROR_CMD_RSP_TIMEOUT)) + { + return HAL_ERROR; + } + + tickstart = HAL_GetTick(); + if ((hmmc->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_CARD) + { + if (hmmc->ErrorCode == HAL_MMC_ERROR_NONE) + { + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DABORT | SDMMC_FLAG_BUSYD0END)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + + if (hmmc->ErrorCode == HAL_MMC_ERROR_CMD_RSP_TIMEOUT) + { + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + else if ((hmmc->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_SDMMC) + { + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DABORT | SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hmmc->ErrorCode = HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + } + else + { + /* Nothing to do*/ + } + + /*The reason of all these while conditions previously is that we need to wait the SDMMC and clear + the appropriate flags that will be set depending of the abort/non abort of the memory */ + /*Not waiting the SDMMC flags will cause the next SDMMC_DISABLE_IDMA to not get cleared and will result + in next SDMMC read/write operation to fail */ + + /*SDMMC ready for clear data flags*/ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* If IDMA Context, disable Internal DMA */ + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + hmmc->State = HAL_MMC_STATE_READY; + + /* Initialize the MMC operation */ + hmmc->Context = MMC_CONTEXT_NONE; + } + return HAL_OK; +} +/** + * @brief Abort the current transfer and disable the MMC (IT mode). + * @param hmmc pointer to a MMC_HandleTypeDef structure that contains + * the configuration information for MMC module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc) +{ + HAL_MMC_CardStateTypeDef CardState; + + /* DIsable All interrupts */ + __HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + /* If IDMA Context, disable Internal DMA */ + hmmc->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Clear All flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + CardState = HAL_MMC_GetCardState(hmmc); + hmmc->State = HAL_MMC_STATE_READY; + + if ((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING)) + { + hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance); + } + if (hmmc->ErrorCode != HAL_MMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { +#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U) + hmmc->AbortCpltCallback(hmmc); +#else + HAL_MMC_AbortCallback(hmmc); +#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Perform specific commands sequence for the different type of erase. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param EraseType Specifies the type of erase to be performed + * This parameter can be one of the following values: + * @arg HAL_MMC_TRIM Erase the write blocks identified by CMD35 & 36 + * @arg HAL_MMC_ERASE Erase the erase groups identified by CMD35 & 36 + * @arg HAL_MMC_DISCARD Discard the write blocks identified by CMD35 & 36 + * @arg HAL_MMC_SECURE_ERASE Perform a secure purge according SRT on the erase groups identified + * by CMD35 & 36 + * @arg HAL_MMC_SECURE_TRIM_STEP1 Mark the write blocks identified by CMD35 & 36 for secure erase + * @arg HAL_MMC_SECURE_TRIM_STEP2 Perform a secure purge according SRT on the write blocks + * previously identified + * @param BlockStartAdd Start Block address + * @param BlockEndAdd End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_EraseSequence(MMC_HandleTypeDef *hmmc, uint32_t EraseType, + uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + uint32_t tickstart = HAL_GetTick(); + + /* Check the erase type value is correct */ + assert_param(IS_MMC_ERASE_TYPE(EraseType)); + + /* Check the coherence between start and end address */ + if (end_add < start_add) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + /* Check that the end address is not out of range of device memory */ + if (end_add > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if (((start_add % 8U) != 0U) || ((end_add % 8U) != 0U)) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + /* Check if the card command class supports erase command */ + if (((hmmc->MmcCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + return HAL_ERROR; + } + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check that the card is not locked */ + if ((SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* In case of low capacity card, the address is not block number but bytes */ + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + start_add *= MMC_BLOCKSIZE; + end_add *= MMC_BLOCKSIZE; + } + + /* Send CMD35 MMC_ERASE_GRP_START with start address as argument */ + errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Send CMD36 MMC_ERASE_GRP_END with end address as argument */ + errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Send CMD38 ERASE with erase type as argument */ + errorstate = SDMMC_CmdErase(hmmc->Instance, EraseType); + if (errorstate == HAL_MMC_ERROR_NONE) + { + if ((EraseType == HAL_MMC_SECURE_ERASE) || (EraseType == HAL_MMC_SECURE_TRIM_STEP2)) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_MAXERASETIMEOUT) + { + errorstate = HAL_MMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + } + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Perform sanitize operation on the device. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_Sanitize(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t response = 0U; + uint32_t count; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Index : 165 - Value : 0x01 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03A50100U); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_MAXERASETIMEOUT) + { + errorstate = HAL_MMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure the Secure Removal Type (SRT) in the Extended CSD register. + * @note This API should be followed by a check on the card state through + * HAL_MMC_GetCardState(). + * @param hmmc Pointer to MMC handle + * @param SRTMode Specifies the type of erase to be performed + * This parameter can be one of the following values: + * @arg HAL_MMC_SRT_ERASE Information removed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_ERASE Information removed by an overwriting with a character + * followed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM Information removed by an overwriting with a character, + * its complement then a random character + * @arg HAL_MMC_SRT_VENDOR_DEFINED Information removed using a vendor defined + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_ConfigSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t SRTMode) +{ + uint32_t srt; + uint32_t errorstate; + uint32_t response = 0U; + uint32_t count; + + /* Check the erase type value is correct */ + assert_param(IS_MMC_SRT_TYPE(SRTMode)); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Get the supported values by the device */ + if (HAL_MMC_GetSupportedSecRemovalType(hmmc, &srt) == HAL_OK) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Check the value passed as parameter is supported by the device */ + if ((SRTMode & srt) != 0U) + { + /* Index : 16 - Value : SRTMode */ + srt |= ((POSITION_VAL(SRTMode)) << 4U); + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03100000U | (srt << 8U))); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + else + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + } + else + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Gets the supported values of the the Secure Removal Type (SRT). + * @param hmmc pointer to MMC handle + * @param SupportedSRT pointer for supported SRT value + * This parameter is a bit field of the following values: + * @arg HAL_MMC_SRT_ERASE Information removed by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_ERASE Information removed by an overwriting with a character followed + * by an erase + * @arg HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM Information removed by an overwriting with a character, + * its complement then a random character + * @arg HAL_MMC_SRT_VENDOR_DEFINED Information removed using a vendor defined + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_GetSupportedSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t *SupportedSRT) +{ + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Read field SECURE_REMOVAL_TYPE [16 = 4*4] of the Extended CSD register */ + *SupportedSRT = (hmmc->Ext_CSD[4] & 0x0000000FU); /* Bits [3:0] of field 16 */ + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Switch the device from Standby State to Sleep State. + * @param hmmc pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_SleepDevice(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate, + sleep_timeout, + timeout, + count, + response = 0U ; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Set the power-off notification to powered-on : Ext_CSD[34] = 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220100U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Set the power-off notification to sleep notification : Ext_CSD[34] = 4 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220400U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Field SLEEP_NOTIFICATION_TIME [216] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_INDEX / 4)] >> + MMC_EXT_CSD_SLEEP_NOTIFICATION_TIME_POS) & 0x000000FFU); + + /* Sleep/Awake Timeout = 10us * 2^SLEEP_NOTIFICATION_TIME */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 100U) + 1U); + + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, + (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Switch the device in stand-by mode */ + (void)SDMMC_CmdSelDesel(hmmc->Instance, 0U); + + /* Field S_A_TIEMOUT [217] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_S_A_TIMEOUT_INDEX / 4)] >> + MMC_EXT_CSD_S_A_TIMEOUT_POS) & 0x000000FFU); + + /* Sleep/Awake Timeout = 100ns * 2^S_A_TIMEOUT */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 10000U) + 1U); + + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_STANDBY) + { + /* Send CMD5 CMD_MMC_SLEEP_AWAKE with RCA and SLEEP as argument */ + errorstate = SDMMC_CmdSleepMmc(hmmc->Instance, + ((hmmc->MmcCard.RelCardAdd << 16U) | (0x1U << 15U))); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + else + { + /* Nothing to do */ + } + } + } + } + } + else + { + /* Nothing to do */ + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Switch the device from Sleep State to Standby State. + * @param hmmc pointer to MMC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_AwakeDevice(MMC_HandleTypeDef *hmmc) +{ + uint32_t errorstate; + uint32_t sleep_timeout; + uint32_t timeout; + uint32_t count; + uint32_t response = 0U; + uint32_t tickstart = HAL_GetTick(); + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Field S_A_TIEMOUT [217] */ + sleep_timeout = ((hmmc->Ext_CSD[(MMC_EXT_CSD_S_A_TIMEOUT_INDEX / 4)] >> MMC_EXT_CSD_S_A_TIMEOUT_POS) & + 0x000000FFU); + + /* Sleep/Awake Timeout = 100ns * 2^S_A_TIMEOUT */ + /* In HAL, the tick interrupt occurs each ms */ + if ((sleep_timeout == 0U) || (sleep_timeout > 0x17U)) + { + sleep_timeout = 0x17U; /* Max register value defined is 0x17 */ + } + timeout = (((1UL << sleep_timeout) / 10000U) + 1U); + + /* Send CMD5 CMD_MMC_SLEEP_AWAKE with RCA and AWAKE as argument */ + errorstate = SDMMC_CmdSleepMmc(hmmc->Instance, (hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= timeout) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_STANDBY) + { + /* Switch the device in transfer mode */ + errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (HAL_MMC_GetCardState(hmmc) == HAL_MMC_CARD_TRANSFER) + { + /* Set the power-off notification to powered-on : Ext_CSD[34] = 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03220100U)); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, + (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + } + else + { + /* NOthing to do */ + } + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + else + { + errorstate = SDMMC_ERROR_REQUEST_NOT_APPLICABLE; + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup MMC_Private_Functions + * @{ + */ + +/** + * @brief Initializes the mmc card. + * @param hmmc Pointer to MMC handle + * @retval MMC Card error state + */ +static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc) +{ + HAL_MMC_CardCSDTypeDef CSD; + uint32_t errorstate; + uint16_t mmc_rca = 2U; + MMC_InitTypeDef Init; + + /* Check the power State */ + if (SDMMC_GetPowerState(hmmc->Instance) == 0U) + { + /* Power off */ + return HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE; + } + + /* Send CMD2 ALL_SEND_CID */ + errorstate = SDMMC_CmdSendCID(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card identification number data */ + hmmc->CID[0U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + hmmc->CID[1U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2); + hmmc->CID[2U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP3); + hmmc->CID[3U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP4); + } + + /* Send CMD3 SET_REL_ADDR with RCA = 2 (should be greater than 1) */ + /* MMC Card publishes its RCA. */ + errorstate = SDMMC_CmdSetRelAddMmc(hmmc->Instance, mmc_rca); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get the MMC card RCA */ + hmmc->MmcCard.RelCardAdd = mmc_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + errorstate = SDMMC_CmdSendCSD(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card Specific Data */ + hmmc->CSD[0U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + hmmc->CSD[1U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2); + hmmc->CSD[2U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP3); + hmmc->CSD[3U] = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP4); + } + + /* Get the Card Class */ + hmmc->MmcCard.Class = (SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP2) >> 20U); + + /* Select the Card */ + errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get CSD parameters */ + if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK) + { + return hmmc->ErrorCode; + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Get Extended CSD parameters */ + if (HAL_MMC_GetCardExtCSD(hmmc, hmmc->Ext_CSD, SDMMC_DATATIMEOUT) != HAL_OK) + { + return hmmc->ErrorCode; + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Configure the SDMMC peripheral */ + Init = hmmc->Init; + Init.BusWide = SDMMC_BUS_WIDE_1B; + (void)SDMMC_Init(hmmc->Instance, Init); + + /* All cards are initialized */ + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores MMC information that will be needed in future + * in the MMC handle. + * @param hmmc Pointer to MMC handle + * @retval error state + */ +static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc) +{ + __IO uint32_t count = 0U; + uint32_t response = 0U; + uint32_t validvoltage = 0U; + uint32_t errorstate; + + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hmmc->Instance); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + while (validvoltage == 0U) + { + if (count++ == SDMMC_MAX_VOLT_TRIAL) + { + return HAL_MMC_ERROR_INVALID_VOLTRANGE; + } + + /* SEND CMD1 APP_CMD with voltage range as argument */ + errorstate = SDMMC_CmdOpCondition(hmmc->Instance, MMC_VOLTAGE_RANGE); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return HAL_MMC_ERROR_UNSUPPORTED_FEATURE; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + } + + /* When power routine is finished and command returns valid voltage */ + if (((response & (0xFF000000U)) >> 24) == 0xC0U) + { + hmmc->MmcCard.CardType = MMC_HIGH_CAPACITY_CARD; + } + else + { + hmmc->MmcCard.CardType = MMC_LOW_CAPACITY_CARD; + } + + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Turns the SDMMC output signals off. + * @param hmmc Pointer to MMC handle + * @retval None + */ +static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc) +{ + /* Set Power State to OFF */ + (void)SDMMC_PowerState_OFF(hmmc->Instance); +} + +/** + * @brief Returns the current card's status. + * @param hmmc Pointer to MMC handle + * @param pCardStatus: pointer to the buffer that will contain the MMC card + * status (Card Status register) + * @retval error state + */ +static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus) +{ + uint32_t errorstate; + + if (pCardStatus == NULL) + { + return HAL_MMC_ERROR_PARAM; + } + + /* Send Status command */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + return errorstate; + } + + /* Get MMC card status */ + *pCardStatus = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + + return HAL_MMC_ERROR_NONE; +} + +/** + * @brief Reads extended CSD register to get the sectors number of the device + * @param hmmc Pointer to MMC handle + * @param pFieldData: Pointer to the read buffer + * @param FieldIndex: Index of the field to be read + * @param Timeout Specify timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, + uint16_t FieldIndex, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t i = 0; + uint32_t tmp_data; + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + while (!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + tmp_data = SDMMC_ReadFIFO(hmmc->Instance); + /* eg : SEC_COUNT : FieldIndex = 212 => i+count = 53 */ + /* DEVICE_TYPE : FieldIndex = 196 => i+count = 49 */ + if ((i + count) == ((uint32_t)FieldIndex / 4U)) + { + *pFieldData = tmp_data; + } + } + i += 8U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->ErrorCode |= errorstate; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Wrap up reading in non-blocking mode. + * @param hmmc pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void MMC_Read_IT(MMC_HandleTypeDef *hmmc) +{ + uint32_t count; + uint32_t data; + uint8_t *tmp; + + tmp = hmmc->pRxBuffPtr; + + if (hmmc->RxXferSize >= SDMMC_FIFO_SIZE) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tmp = (uint8_t)(data & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 8U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 16U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 24U) & 0xFFU); + tmp++; + } + + hmmc->pRxBuffPtr = tmp; + hmmc->RxXferSize -= SDMMC_FIFO_SIZE; + } +} + +/** + * @brief Wrap up writing in non-blocking mode. + * @param hmmc pointer to a MMC_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void MMC_Write_IT(MMC_HandleTypeDef *hmmc) +{ + uint32_t count; + uint32_t data; + const uint8_t *tmp; + + tmp = hmmc->pTxBuffPtr; + + if (hmmc->TxXferSize >= SDMMC_FIFO_SIZE) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*tmp); + tmp++; + data |= ((uint32_t)(*tmp) << 8U); + tmp++; + data |= ((uint32_t)(*tmp) << 16U); + tmp++; + data |= ((uint32_t)(*tmp) << 24U); + tmp++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + } + + hmmc->pTxBuffPtr = tmp; + hmmc->TxXferSize -= SDMMC_FIFO_SIZE; + } +} + +/** + * @brief Switches the MMC card to high speed mode. + * @param hmmc MMC handle + * @param state: State of high speed mode + * @retval MMC Card error state + */ +static uint32_t MMC_HighSpeed(MMC_HandleTypeDef *hmmc, FunctionalState state) +{ + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t response = 0U; + uint32_t count; + uint32_t sdmmc_clk; + SDMMC_InitTypeDef Init; + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) && (state == DISABLE)) + { + errorstate = MMC_PwrClassUpdate(hmmc, (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS), SDMMC_SPEED_MODE_DEFAULT); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 185 - Value : 0 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B90000U); + } + } + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) == 0U) && (state != DISABLE)) + { + errorstate = MMC_PwrClassUpdate(hmmc, (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS), SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 185 - Value : 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B90100U); + } + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Configure high speed */ + Init.ClockEdge = hmmc->Init.ClockEdge; + Init.ClockPowerSave = hmmc->Init.ClockPowerSave; + Init.BusWide = (hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS); + Init.HardwareFlowControl = hmmc->Init.HardwareFlowControl; + + if (state == DISABLE) + { + Init.ClockDiv = hmmc->Init.ClockDiv; + (void)SDMMC_Init(hmmc->Instance, Init); + + CLEAR_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED); + } + else + { + /* High Speed Clock should be less or equal to 52MHz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC12); + + if (sdmmc_clk == 0U) + { + errorstate = SDMMC_ERROR_INVALID_PARAMETER; + } + else + { + if (sdmmc_clk <= MMC_HIGH_SPEED_FREQ) + { + Init.ClockDiv = 0; + } + else + { + Init.ClockDiv = (sdmmc_clk / (2U * MMC_HIGH_SPEED_FREQ)) + 1U; + } + (void)SDMMC_Init(hmmc->Instance, Init); + + SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED); + } + } + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + + return errorstate; +} + +/** + * @brief Switches the MMC card to Double Data Rate (DDR) mode. + * @param hmmc MMC handle + * @param state: State of DDR mode + * @retval MMC Card error state + */ +static uint32_t MMC_DDR_Mode(MMC_HandleTypeDef *hmmc, FunctionalState state) +{ + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t response = 0U; + uint32_t count; + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) != 0U) && (state == DISABLE)) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS_0) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_4B, SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 1 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_8B, SDMMC_SPEED_MODE_HIGH); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 2 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U); + } + } + } + + if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_DDR) == 0U) && (state != DISABLE)) + { + if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_WIDBUS_0) != 0U) + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_4B, SDMMC_SPEED_MODE_DDR); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 5 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70500U); + } + } + else + { + errorstate = MMC_PwrClassUpdate(hmmc, SDMMC_BUS_WIDE_8B, SDMMC_SPEED_MODE_DDR); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Index : 183 - Value : 6 */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70600U); + } + } + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Configure DDR mode */ + if (state == DISABLE) + { + CLEAR_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_DDR); + } + else + { + SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_DDR); + } + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + + return errorstate; +} + +/** + * @brief Update the power class of the device. + * @param hmmc MMC handle + * @param Wide Wide of MMC bus + * @param Speed Speed of the MMC bus + * @retval MMC Card error state + */ +static uint32_t MMC_PwrClassUpdate(MMC_HandleTypeDef *hmmc, uint32_t Wide, uint32_t Speed) +{ + uint32_t count; + uint32_t response = 0U; + uint32_t errorstate = HAL_MMC_ERROR_NONE; + uint32_t power_class; + uint32_t supported_pwr_class; + + if ((Wide == SDMMC_BUS_WIDE_8B) || (Wide == SDMMC_BUS_WIDE_4B)) + { + power_class = 0U; /* Default value after power-on or software reset */ + + /* Read the PowerClass field of the Extended CSD register */ + if (MMC_ReadExtCSD(hmmc, &power_class, 187, SDMMC_DATATIMEOUT) != HAL_OK) /* Field POWER_CLASS [187] */ + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + else + { + power_class = ((power_class >> 24U) & 0x000000FFU); + } + + /* Get the supported PowerClass field of the Extended CSD register */ + if (Speed == SDMMC_SPEED_MODE_DDR) + { + /* Field PWR_CL_DDR_52_xxx [238 or 239] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_DDR_52_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_DDR_52_POS) & + 0x000000FFU); + } + else if (Speed == SDMMC_SPEED_MODE_HIGH) + { + /* Field PWR_CL_52_xxx [200 or 202] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_52_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_52_POS) & + 0x000000FFU); + } + else + { + /* Field PWR_CL_26_xxx [201 or 203] */ + supported_pwr_class = ((hmmc->Ext_CSD[(MMC_EXT_CSD_PWR_CL_26_INDEX / 4)] >> MMC_EXT_CSD_PWR_CL_26_POS) & + 0x000000FFU); + } + + if (errorstate == HAL_MMC_ERROR_NONE) + { + if (Wide == SDMMC_BUS_WIDE_8B) + { + /* Bit [7:4]: power class for 8-bits bus configuration - Bit [3:0]: power class for 4-bits bus configuration */ + supported_pwr_class = (supported_pwr_class >> 4U); + } + + if ((power_class & 0x0FU) != (supported_pwr_class & 0x0FU)) + { + /* Need to change current power class */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, (0x03BB0000U | ((supported_pwr_class & 0x0FU) << 8U))); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + } + } + + return errorstate; +} + +/** + * @brief Used to select the partition. + * @param hmmc Pointer to MMC handle + * @param Partition Partition type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_SwitchPartition(MMC_HandleTypeDef *hmmc, HAL_MMC_PartitionTypeDef Partition) +{ + uint32_t errorstate; + uint32_t response = 0U; + uint32_t count; + uint32_t tickstart = HAL_GetTick(); + uint32_t arg = Partition | 0x03B30000U; + + /* Check the state of the driver */ + if (hmmc->State == HAL_MMC_STATE_READY) + { + /* Change State */ + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Index : 179 - Value : partition */ + errorstate = SDMMC_CmdSwitch(hmmc->Instance, arg); + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* Wait that the device is ready by checking the D0 line */ + while ((!__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_BUSYD0END)) && (errorstate == HAL_MMC_ERROR_NONE)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_MAXERASETIMEOUT) + { + errorstate = HAL_MMC_ERROR_TIMEOUT; + } + } + + /* Clear the flag corresponding to end D0 bus line */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_FLAG_BUSYD0END); + + if (errorstate == HAL_MMC_ERROR_NONE) + { + /* While card is not ready for data and trial number for sending CMD13 is not exceeded */ + count = SDMMC_MAX_TRIAL; + do + { + errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U)); + if (errorstate != HAL_MMC_ERROR_NONE) + { + break; + } + + /* Get command response */ + response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1); + count--; + } while (((response & 0x100U) == 0U) && (count != 0U)); + + /* Check the status after the switch command execution */ + if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE)) + { + /* Check the bit SWITCH_ERROR of the device status */ + if ((response & 0x80U) != 0U) + { + errorstate = SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } + } + else if (count == 0U) + { + errorstate = SDMMC_ERROR_TIMEOUT; + } + else + { + /* Nothing to do */ + } + } + } + + /* Change State */ + hmmc->State = HAL_MMC_STATE_READY; + + /* Manage errors */ + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + + if (errorstate != HAL_MMC_ERROR_TIMEOUT) + { + return HAL_ERROR; + } + else + { + return HAL_TIMEOUT; + } + } + else + { + return HAL_OK; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Allows to program the authentication key within the RPMB partition + * @param hmmc Pointer to MMC handle + * @param pKey pointer to the authentication key (32 bytes) + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_RPMB_ProgramAuthenticationKey(MMC_HandleTypeDef *hmmc, const uint8_t *pKey, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t byte_count = 0; + uint32_t data; + uint32_t dataremaining; + uint8_t tail_pack[12] = {0}; + uint8_t zero_pack[4] = {0}; + const uint8_t *rtempbuff; + uint8_t *tempbuff; + + tail_pack[11] = 0x01; + + if (NULL == pKey) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x80000001U); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + { + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, 0); + } + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + rtempbuff = zero_pack; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*rtempbuff); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 8U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 16U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 24U); + rtempbuff++; + byte_count++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + if (byte_count < MMC_RPMB_KEYMAC_POSITION) + { + rtempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_KEYMAC_POSITION) + { + rtempbuff = pKey; + } + else if ((byte_count < MMC_RPMB_WRITE_COUNTER_POSITION) && \ + (byte_count >= MMC_RPMB_DATA_POSITION)) + { + rtempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + rtempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Read Response Packet */ + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x00000001); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* Poll on SDMMC flags */ + tempbuff = zero_pack; + byte_count = 0; + + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + byte_count++; + if (byte_count < MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + /* Check result of operation */ + if ((tail_pack[9] != 0x00U) || (tail_pack[10] != 0x01U)) + { + hmmc->RPMBErrorCode |= tail_pack[9]; + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to get the value of write counter within the RPMB partition. + * @param hmmc Pointer to MMC handle + * @param pNonce pointer to the value of nonce (16 bytes) + * @param Timeout Specify timeout value + * @retval write counter value. + */ +uint32_t HAL_MMC_RPMB_GetWriteCounter(MMC_HandleTypeDef *hmmc, uint8_t *pNonce, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t byte_count = 0; + uint32_t data; + uint32_t dataremaining; + uint8_t tail_pack[12] = {0}; + uint8_t zero_pack[4] = {0}; + uint8_t echo_nonce[16] = {0}; + uint8_t *tempbuff = zero_pack; + + tail_pack[11] = 0x02; + + if (NULL == pNonce) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x00000001U); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + + /* Send Request Packet */ + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*tempbuff); + tempbuff++; + byte_count++; + data |= ((uint32_t)(*tempbuff) << 8U); + tempbuff++; + byte_count++; + data |= ((uint32_t)(*tempbuff) << 16U); + tempbuff++; + byte_count++; + data |= ((uint32_t)(*tempbuff) << 24U); + tempbuff++; + byte_count++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + if (byte_count < MMC_RPMB_NONCE_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + tempbuff = (uint8_t *)pNonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Read Response Packt */ + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x00000001U); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* Poll on SDMMC flags */ + tempbuff = zero_pack; + + byte_count = 0; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + byte_count++; + if (byte_count < MMC_RPMB_NONCE_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + tempbuff = echo_nonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + for (uint8_t i = 0; i < 16U; i++) + { + if (pNonce[i] != echo_nonce[i]) + { + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } + } + + return ((uint32_t)tail_pack[3] | ((uint32_t)tail_pack[2] << 8) | ((uint32_t)tail_pack[1] << 16) | \ + ((uint32_t)tail_pack[0] << 24)); + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + hmmc->RPMBErrorCode |= HAL_MMC_ERROR_RPMB_COUNTER_FAILURE; + return 0; + } +} + +/** + * @brief Allows to write block(s) to a specified address in the RPMB partition. The Data + * transfer is managed by polling mode. + * @param hmmc Pointer to MMC handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @param pMAC Pointer to the authentication MAC buffer + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_RPMB_WriteBlocks(MMC_HandleTypeDef *hmmc, const uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pMAC, uint32_t Timeout) +{ + + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t byte_count = 0; + uint32_t data; + uint32_t dataremaining; + uint8_t tail_pack[12] = {0}; + uint8_t zero_pack[4] = {0}; + uint8_t echo_nonce[16] = {0}; + const uint8_t local_nonce[16] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x00, 0x01, 0x02, + 0x03, 0x04, 0x00, 0x01, 0x02, 0x03, 0x04, 0x08 + }; + const uint8_t *rtempbuff; + uint8_t *tempbuff; + uint32_t arg = 0x80000000U; + uint32_t offset = 0; + + if ((NumberOfBlocks != 0x1U) && (NumberOfBlocks != 0x2U) && (NumberOfBlocks != 0x20U)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + if ((NULL == pData) || (NULL == pMAC)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM; + return HAL_ERROR; + } + + tail_pack[11] = 0x02; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x00000001U); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send Request Packet */ + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + rtempbuff = zero_pack; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*rtempbuff); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 8U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 16U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 24U); + rtempbuff++; + byte_count++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + if (byte_count < MMC_RPMB_NONCE_POSITION) + { + rtempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + rtempbuff = local_nonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + rtempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Read Response Packt */ + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 0x00000001); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* Poll on SDMMC flags */ + tempbuff = zero_pack; + + byte_count = 0; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + byte_count++; + if (byte_count < MMC_RPMB_NONCE_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + tempbuff = echo_nonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + for (uint8_t i = 0; i < 16U; i++) + { + if (local_nonce[i] != echo_nonce[i]) + { + return HAL_ERROR; + } + } + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } + tail_pack[11] = 0x03; + tail_pack[10] = 0x00; + tail_pack[7] = (uint8_t)(NumberOfBlocks) & 0xFFU; + tail_pack[6] = (uint8_t)(NumberOfBlocks >> 8) & 0xFFU; + tail_pack[5] = (uint8_t)(BlockAdd) & 0xFFU; + tail_pack[4] = (uint8_t)(BlockAdd >> 8) & 0xFFU; + + rtempbuff = zero_pack; + byte_count = 0; + arg |= NumberOfBlocks; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, arg); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send Request Packet */ + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + + { + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, 0); + } + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*rtempbuff); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 8U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 16U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 24U); + rtempbuff++; + byte_count++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + if (byte_count == MMC_RPMB_KEYMAC_POSITION) + { + rtempbuff = pMAC; + } + if (byte_count == MMC_RPMB_DATA_POSITION) + { + rtempbuff = &pData[offset]; + } + if ((byte_count >= MMC_RPMB_NONCE_POSITION) && \ + (byte_count < MMC_RPMB_WRITE_COUNTER_POSITION)) + { + rtempbuff = zero_pack; + } + if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + rtempbuff = tail_pack; + } + else if (byte_count == MMC_BLOCKSIZE) + { + offset += (uint32_t)256U; + byte_count = 0; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Response Packet */ + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, arg); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + + { + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, 0); + } + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* Poll on SDMMC flags */ + tempbuff = zero_pack; + byte_count = 0; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + byte_count++; + if (byte_count < MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + /* Check result of operation */ + if (((tail_pack[9] & (uint8_t)0xFEU) != 0x00U) || (tail_pack[10] != 0x03U)) + { + hmmc->RPMBErrorCode |= tail_pack[9]; + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to read block(s) to a specified address in the RPMB partition. The Data + * transfer is managed by polling mode. + * @param hmmc Pointer to MMC handle + * @param pData Pointer to the buffer that will contain the data to transmit + * @param BlockAdd Block Address where data will be written + * @param NumberOfBlocks Number of blocks to write + * @param pNonce Pointer to the buffer that will contain the nonce to transmit + * @param pMAC Pointer to the authentication MAC buffer + * @param Timeout Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMC_RPMB_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint16_t BlockAdd, + uint16_t NumberOfBlocks, const uint8_t *pNonce, uint8_t *pMAC, + uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t byte_count = 0; + uint32_t data; + uint8_t tail_pack[12] = {0}; + uint8_t zero_pack[4] = {0}; + uint8_t echo_nonce[16] = {0}; + uint32_t dataremaining; + const uint8_t *rtempbuff; + uint8_t *tempbuff; + uint32_t arg = 0; + uint32_t offset = 0; + + arg |= NumberOfBlocks; + + tail_pack[11] = 0x04; + tail_pack[10] = 0x00; + tail_pack[7] = 0x00; + tail_pack[6] = 0x00; + tail_pack[5] = (uint8_t)(BlockAdd) & 0xFFU; + tail_pack[4] = (uint8_t)(BlockAdd >> 8) & 0xFFU; + tail_pack[3] = 0x00; + tail_pack[2] = 0x00; + tail_pack[1] = 0x00; + tail_pack[0] = 0x00; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_BUSY; + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0U; + + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, 1); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Send Request Packet */ + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + rtempbuff = zero_pack; + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*rtempbuff); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 8U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 16U); + rtempbuff++; + byte_count++; + data |= ((uint32_t)(*rtempbuff) << 24U); + rtempbuff++; + byte_count++; + (void)SDMMC_WriteFIFO(hmmc->Instance, &data); + if (byte_count < MMC_RPMB_NONCE_POSITION) + { + rtempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + rtempbuff = pNonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + rtempbuff = tail_pack; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Read Response Packet */ + errorstate = SDMMC_CmdBlockCount(hmmc->Instance, arg); + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + /* Write Blocks in Polling mode */ + hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, 0); + + if (errorstate != HAL_MMC_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= errorstate; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + /* Poll on SDMMC flags */ + tempbuff = zero_pack; + byte_count = 0; + + dataremaining = config.DataLength; + while (!__HAL_MMC_GET_FLAG(hmmc, + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hmmc->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + byte_count++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + byte_count++; + if (byte_count < MMC_RPMB_KEYMAC_POSITION) + { + tempbuff = zero_pack; + } + else if (byte_count == MMC_RPMB_KEYMAC_POSITION) + { + tempbuff = (uint8_t *)pMAC; + } + else if (byte_count == MMC_RPMB_DATA_POSITION) + { + tempbuff = &pData[offset]; + } + else if (byte_count == MMC_RPMB_NONCE_POSITION) + { + tempbuff = echo_nonce; + } + else if (byte_count == MMC_RPMB_WRITE_COUNTER_POSITION) + { + tempbuff = tail_pack; + } + else if (byte_count == MMC_BLOCKSIZE) + { + byte_count = 0; + offset += (uint32_t)256U; + } + else + { + /* Nothing to do */ + } + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hmmc->Instance); + + /* Get error state */ + if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else if (__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS); + hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN; + hmmc->State = HAL_MMC_STATE_READY; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS); + + hmmc->State = HAL_MMC_STATE_READY; + + for (uint8_t i = 0; i < 16U; i++) + { + if (pNonce[i] != echo_nonce[i]) + { + return HAL_ERROR; + } + } + + /* Check result of operation */ + if ((tail_pack[9] != 0x00U) || (tail_pack[10] != 0x04U)) + { + hmmc->RPMBErrorCode |= tail_pack[9]; + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY; + return HAL_ERROR; + } +} + + +/** + * @brief Read DMA Linked list node Transfer completed callbacks + * @param hmmc MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Read_DMALnkLstBufCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Read_DMALnkLstBufCpltCallback can be implemented in the user file + */ +} +/** + * @brief Read DMA Linked list node Transfer completed callbacks + * @param hmmc MMC handle + * @retval None + */ +__weak void HAL_MMCEx_Write_DMALnkLstBufCpltCallback(MMC_HandleTypeDef *hmmc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmmc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MMCEx_Write_DMALnkLstBufCpltCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* HAL_MMC_MODULE_ENABLED */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc_ex.c new file mode 100644 index 000000000..3616aa833 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_mmc_ex.c @@ -0,0 +1,448 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_mmc_ex.c + * @author MCD Application Team + * @brief MMC card Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (MMC) peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The MMC Extension HAL driver can be used as follows: + (+) Configure Buffer0 and Buffer1 start address and Buffer size using HAL_MMCEx_ConfigDMAMultiBuffer() function. + + (+) Start Read and Write for multibuffer mode using HAL_MMCEx_ReadBlocksDMAMultiBuffer() and + HAL_MMCEx_WriteBlocksDMAMultiBuffer() functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup MMCEx MMCEx + * @brief MMC Extended HAL module driver + * @{ + */ + +#if defined (SDMMC1) || defined (SDMMC2) +#ifdef HAL_MMC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup MMCEx_Exported_Functions + * @{ + */ + + + +/** @addtogroup MMCEx_Exported_Functions_Group1 + * @brief Linked List management functions + * +@verbatim + =============================================================================== + ##### Linked List management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed functions. + +@endverbatim + * @{ + */ + +/** + * @brief Build Linked List node. + * @param pNode: Pointer to new node to add. + * @param pNodeConf: Pointer to configuration parameters for new node to add. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_BuildNode(MMC_DMALinkNodeTypeDef *pNode, + MMC_DMALinkNodeConfTypeDef *pNodeConf) +{ + + if (SDMMC_DMALinkedList_BuildNode(pNode, pNodeConf) != SDMMC_ERROR_NONE) + { + return (HAL_ERROR); + } + else + { + return (HAL_OK); + } + +} +/** + * @brief Insert Linked List node. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pPrevNode: Pointer to previous node. + * @param pNewNode: Pointer to new node to insert. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_InsertNode(MMC_DMALinkedListTypeDef *pLinkedList, + MMC_DMALinkNodeTypeDef *pPrevNode, + MMC_DMALinkNodeTypeDef *pNewNode) +{ + + if (SDMMC_DMALinkedList_InsertNode(pLinkedList, pPrevNode, pNewNode) != SDMMC_ERROR_NONE) + { + return (HAL_ERROR); + } + else + { + return (HAL_OK); + } + +} +/** + * @brief Remove Linked List node. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_RemoveNode(MMC_DMALinkedListTypeDef *pLinkedList, + MMC_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_RemoveNode(pLinkedList, pNode) != SDMMC_ERROR_NONE) + { + return (HAL_ERROR); + } + else + { + return (HAL_OK); + } +} + +/** + * @brief Lock Linked List node. + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_LockNode(MMC_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_LockNode(pNode) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Unlock Linked List node. + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_UnlockNode(MMC_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_UnlockNode(pNode) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Enable Circular mode for DMA Linked List mode. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_EnableCircularMode(MMC_DMALinkedListTypeDef *pLinkedList) +{ + + if (SDMMC_DMALinkedList_EnableCircularMode(pLinkedList) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} +/** + * @brief Disable Circular mode for DMA Linked List mode. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_DisableCircularMode(MMC_DMALinkedListTypeDef *pLinkedList) +{ + + if (SDMMC_DMALinkedList_DisableCircularMode(pLinkedList) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + + +/** + * @brief Reads block(s) from a specified address in a card. The received Data will be stored in linked list buffers. + * linked list should be prepared before call this function . + * @param hmmc: MMC handle + * @param pLinkedList: pointer to first linked list node + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_ReadBlocks(MMC_HandleTypeDef *hmmc, MMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->Instance->IDMABASER = (uint32_t) pLinkedList->pHeadNode->IDMABASER; + hmmc->Instance->IDMABSIZE = (uint32_t) pLinkedList->pHeadNode->IDMABSIZE; + hmmc->Instance->IDMABAR = (uint32_t) pLinkedList->pHeadNode; + hmmc->Instance->IDMALAR = (uint32_t) SDMMC_IDMALAR_ABR | SDMMC_IDMALAR_ULS | SDMMC_IDMALAR_ULA | + sizeof(SDMMC_DMALinkNodeTypeDef) ; /* Initial configuration */ + + DmaBase0_reg = hmmc->Instance->IDMABASER; + DmaBase1_reg = hmmc->Instance->IDMABAR; + + if ((hmmc->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hmmc->ErrorCode = HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + hmmc->State = HAL_MMC_STATE_BUSY; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + hmmc->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Read Blocks in DMA mode */ + hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + +} + +/** + * @brief Write block(s) to a specified address in a card. The transferred Data are stored linked list nodes buffers . + * linked list should be prepared before call this function . + * @param hmmc: MMC handle + * @param pLinkedList: pointer to first linked list node + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MMCEx_DMALinkedList_WriteBlocks(MMC_HandleTypeDef *hmmc, MMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t add = BlockAdd; + + if (hmmc->State == HAL_MMC_STATE_READY) + { + if ((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr)) + { + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Check the case of 4kB blocks (field DATA SECTOR SIZE of extended CSD register) */ + if (((hmmc->Ext_CSD[(MMC_EXT_CSD_DATA_SEC_SIZE_INDEX / 4)] >> MMC_EXT_CSD_DATA_SEC_SIZE_POS) & 0x000000FFU) != 0x0U) + { + if ((NumberOfBlocks % 8U) != 0U) + { + /* The number of blocks should be a multiple of 8 sectors of 512 bytes = 4 KBytes */ + hmmc->ErrorCode |= HAL_MMC_ERROR_BLOCK_LEN_ERR; + return HAL_ERROR; + } + + if ((BlockAdd % 8U) != 0U) + { + /* The address should be aligned to 8 (corresponding to 4 KBytes blocks) */ + hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_MISALIGNED; + return HAL_ERROR; + } + } + + hmmc->Instance->IDMABASER = (uint32_t) pLinkedList->pHeadNode->IDMABASER; + hmmc->Instance->IDMABSIZE = (uint32_t) pLinkedList->pHeadNode->IDMABSIZE; + + hmmc->Instance->IDMABAR = (uint32_t) pLinkedList->pHeadNode; + hmmc->Instance->IDMALAR = (uint32_t) SDMMC_IDMALAR_ABR | SDMMC_IDMALAR_ULS | SDMMC_IDMALAR_ULA | + sizeof(SDMMC_DMALinkNodeTypeDef) ; /* Initial configuration */ + + DmaBase0_reg = hmmc->Instance->IDMABASER; + DmaBase1_reg = hmmc->Instance->IDMABAR; + + if ((hmmc->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hmmc->ErrorCode = HAL_MMC_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hmmc->Instance->DCTRL = 0; + + hmmc->ErrorCode = HAL_MMC_ERROR_NONE; + + hmmc->State = HAL_MMC_STATE_BUSY; + + if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD) + { + add *= 512U; + } + + /* Configure the MMC DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hmmc->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hmmc->Instance); + + hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Write Blocks in DMA mode */ + hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add); + if (errorstate != HAL_MMC_ERROR_NONE) + { + hmmc->State = HAL_MMC_STATE_READY; + hmmc->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MMC_MODULE_ENABLED */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_msp_template.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_msp_template.c new file mode 100644 index 000000000..0c4009107 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_msp_template.c @@ -0,0 +1,97 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_msp.c + * @author MCD Application Team + * @brief HAL MSP module. + * This file should be copied to the application folder and renamed + * to stm32h7rsxx_hal_msp.c + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_MSP HAL MSP module driver + * @brief HAL MSP module. + * @{ + */ + +/* Private typedefs ----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_MSP_Private_Functions + * @{ + */ + +/** + * @brief Initialize the Global MSP. + * @retval None + */ +void HAL_MspInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief DeInitialize the Global MSP. + * @retval None + */ +void HAL_MspDeInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief Initialize the PPP MSP. + * @retval None + */ +/* +void HAL_PPP_MspInit(void) +{ +} +*/ + +/** + * @brief DeInitialize the PPP MSP. + * @retval None + */ +/* +void HAL_PPP_MspDeInit(void) +{ +} +*/ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nand.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nand.c new file mode 100644 index 000000000..09c550893 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nand.c @@ -0,0 +1,2231 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_nand.c + * @author MCD Application Team + * @brief NAND HAL module driver. + * This file provides a generic firmware to drive NAND memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NAND flash memories. It uses the FMC layer functions to interface + with NAND devices. This driver is used as follows: + + (+) NAND flash memory configuration sequence using the function HAL_NAND_Init() + with control and timing parameters for both common and attribute spaces. + + (+) Read NAND flash memory maker and device IDs using the function + HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef + structure declared by the function caller. + + (+) Access NAND flash memory by read/write operations using the functions + HAL_NAND_Read_Page_8b()/HAL_NAND_Read_SpareArea_8b(), + HAL_NAND_Write_Page_8b()/HAL_NAND_Write_SpareArea_8b(), + HAL_NAND_Read_Page_16b()/HAL_NAND_Read_SpareArea_16b(), + HAL_NAND_Write_Page_16b()/HAL_NAND_Write_SpareArea_16b() + to read/write page(s)/spare area(s). These functions use specific device + information (Block, page size..) predefined by the user in the NAND_DeviceConfigTypeDef + structure. The read/write address information is contained by the Nand_Address_Typedef + structure passed as parameter. + + (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset(). + + (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block(). + The erase block address information is contained in the Nand_Address_Typedef + structure passed as parameter. + + (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status(). + + (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/ + HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction + feature or the function HAL_NAND_GetECC() to get the ECC correction code. + + (+) You can monitor the NAND device HAL state by calling the function + HAL_NAND_GetState() + + [..] + (@) This driver is a set of generic APIs which handle standard NAND flash operations. + If a NAND flash device contains different operations and/or implementations, + it should be implemented separately. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_NAND_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_NAND_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : NAND MspInit. + (+) MspDeInitCallback : NAND MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_NAND_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : NAND MspInit. + (+) MspDeInitCallback : NAND MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_NAND_Init and if the state is HAL_NAND_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_NAND_Init + and HAL_NAND_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_NAND_Init and HAL_NAND_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_NAND_RegisterCallback before calling HAL_NAND_DeInit + or HAL_NAND_Init function. + + When The compilation define USE_HAL_NAND_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_NAND_MODULE_ENABLED + +/** @defgroup NAND NAND + * @brief NAND HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private Constants ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup NAND_Exported_Functions NAND Exported Functions + * @{ + */ + +/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NAND Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NAND memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform NAND memory Initialization sequence + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param ComSpace_Timing pointer to Common space timing structure + * @param AttSpace_Timing pointer to Attribute space timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, + FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing) +{ + /* Check the NAND handle state */ + if (hnand == NULL) + { + return HAL_ERROR; + } + + if (hnand->State == HAL_NAND_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnand->Lock = HAL_UNLOCKED; + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + if (hnand->MspInitCallback == NULL) + { + hnand->MspInitCallback = HAL_NAND_MspInit; + } + hnand->ItCallback = HAL_NAND_ITCallback; + + /* Init the low level hardware */ + hnand->MspInitCallback(hnand); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NAND_MspInit(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + } + + /* Initialize NAND control Interface */ + (void)FMC_NAND_Init(hnand->Instance, &(hnand->Init)); + + /* Initialize NAND common space timing Interface */ + (void)FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank); + + /* Initialize NAND attribute space timing Interface */ + (void)FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank); + + /* Enable the NAND device */ + __FMC_NAND_ENABLE(hnand->Instance); + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Perform NAND memory De-Initialization sequence + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand) +{ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + if (hnand->MspDeInitCallback == NULL) + { + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + } + + /* DeInit the low level hardware */ + hnand->MspDeInitCallback(hnand); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NAND_MspDeInit(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Configure the NAND registers with their reset values */ + (void)FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank); + + /* Reset the NAND controller state */ + hnand->State = HAL_NAND_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnand); + + return HAL_OK; +} + +/** + * @brief NAND MSP Init + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_MspInit could be implemented in the user file + */ +} + +/** + * @brief NAND MSP DeInit + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief This function handles NAND device interrupt request. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand) +{ + /* Check NAND interrupt Rising edge flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Rising edge pending bit */ + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_RISING_EDGE); + } + + /* Check NAND interrupt Level flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Level pending bit */ + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_LEVEL); + } + + /* Check NAND interrupt Falling edge flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt Falling edge pending bit */ + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FALLING_EDGE); + } + + /* Check NAND interrupt FIFO empty flag */ + if (__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT)) + { + /* NAND interrupt callback*/ +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) + hnand->ItCallback(hnand); +#else + HAL_NAND_ITCallback(hnand); +#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */ + + /* Clear NAND interrupt FIFO empty pending bit */ + __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FEMPT); + } + +} + +/** + * @brief NAND interrupt feature callback + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval None + */ +__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnand); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NAND_ITCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NAND Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NAND + memory + +@endverbatim + * @{ + */ + +/** + * @brief Read the NAND memory electronic signature + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pNAND_ID NAND ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID) +{ + __IO uint32_t data = 0; + __IO uint32_t data1 = 0; + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* Send Read ID command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; + __DSB(); + + /* Read the electronic signature from NAND flash */ + if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8) + { + data = *(__IO uint32_t *)deviceaddress; + + /* Return the data read */ + pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data); + pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data); + pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data); + pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data); + } + else + { + data = *(__IO uint32_t *)deviceaddress; + data1 = *((__IO uint32_t *)deviceaddress + 4); + + /* Return the data read */ + pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data); + pNAND_ID->Device_Id = ADDR_3RD_CYCLE(data); + pNAND_ID->Third_Id = ADDR_1ST_CYCLE(data1); + pNAND_ID->Fourth_Id = ADDR_3RD_CYCLE(data1); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief NAND memory reset + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand) +{ + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* Send NAND reset command */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF; + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; + +} + +/** + * @brief Configure the device: Enter the physical parameters of the device + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pDeviceConfig pointer to NAND_DeviceConfigTypeDef structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig) +{ + hnand->Config.PageSize = pDeviceConfig->PageSize; + hnand->Config.SpareAreaSize = pDeviceConfig->SpareAreaSize; + hnand->Config.BlockSize = pDeviceConfig->BlockSize; + hnand->Config.BlockNbr = pDeviceConfig->BlockNbr; + hnand->Config.PlaneSize = pDeviceConfig->PlaneSize; + hnand->Config.PlaneNbr = pDeviceConfig->PlaneNbr; + hnand->Config.ExtraCommandEnable = pDeviceConfig->ExtraCommandEnable; + + return HAL_OK; +} + +/** + * @brief Read Page(s) from NAND memory block (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to destination read buffer + * @param NumPageToRead number of pages to read from block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumPageToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpagesread = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToRead; + uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) read loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send read page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *buff = *(uint8_t *)deviceaddress; + buff++; + } + + /* Increment read pages number */ + numpagesread++; + + /* Decrement pages to read */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Page(s) from NAND memory block (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to destination read buffer. pBuffer should be 16bits aligned + * @param NumPageToRead number of pages to read from block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumPageToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpagesread = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToRead; + uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) read loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send read page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Calculate PageSize */ + if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8) + { + hnand->Config.PageSize = hnand->Config.PageSize / 2U; + } + else + { + /* Do nothing */ + /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/ + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *buff = *(uint16_t *)deviceaddress; + buff++; + } + + /* Increment read pages number */ + numpagesread++; + + /* Decrement pages to read */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Page(s) to NAND memory block (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumPageToWrite number of pages to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumPageToWrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpageswritten = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToWrite; + const uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) write loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send write page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *(__IO uint8_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written pages number */ + numpageswritten++; + + /* Decrement pages to write */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Page(s) to NAND memory block (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned + * @param NumPageToWrite number of pages to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumPageToWrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numpageswritten = 0U; + uint32_t nandaddress; + uint32_t nbpages = NumPageToWrite; + const uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Page(s) write loop */ + while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Send write page command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Calculate PageSize */ + if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8) + { + hnand->Config.PageSize = hnand->Config.PageSize / 2U; + } + else + { + /* Do nothing */ + /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/ + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.PageSize; index++) + { + *(__IO uint16_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written pages number */ + numpageswritten++; + + /* Decrement pages to write */ + nbpages--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Spare area(s) from NAND memory (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumSpareAreaToRead Number of spare area to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint8_t *pBuffer, uint32_t NumSpareAreaToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numsparearearead = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaToRead; + uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = COLUMN_ADDRESS(hnand); + + /* Spare area(s) read loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *buff = *(uint8_t *)deviceaddress; + buff++; + } + + /* Increment read spare areas number */ + numsparearearead++; + + /* Decrement spare areas to read */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Read Spare area(s) from NAND memory (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned. + * @param NumSpareAreaToRead Number of spare area to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + uint16_t *pBuffer, uint32_t NumSpareAreaToRead) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numsparearearead = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaToRead; + uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand)); + + /* Spare area(s) read loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send read spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1; + __DSB(); + + if (hnand->Config.ExtraCommandEnable == ENABLE) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Go back to read mode */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00); + __DSB(); + } + + /* Get Data into Buffer */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *buff = *(uint16_t *)deviceaddress; + buff++; + } + + /* Increment read spare areas number */ + numsparearearead++; + + /* Decrement spare areas to read */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Spare area(s) to NAND memory (8-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write + * @param NumSpareAreaTowrite number of spare areas to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint8_t *pBuffer, uint32_t NumSpareAreaTowrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numspareareawritten = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaTowrite; + const uint8_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* Page address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = COLUMN_ADDRESS(hnand); + + /* Spare area(s) write loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *(__IO uint8_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written spare areas number */ + numspareareawritten++; + + /* Decrement spare areas to write */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Write Spare area(s) to NAND memory (16-bits addressing) + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @param pBuffer pointer to source buffer to write. pBuffer should be 16bits aligned. + * @param NumSpareAreaTowrite number of spare areas to write to block + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress, + const uint16_t *pBuffer, uint32_t NumSpareAreaTowrite) +{ + uint32_t index; + uint32_t tickstart; + uint32_t deviceaddress; + uint32_t numspareareawritten = 0U; + uint32_t nandaddress; + uint32_t columnaddress; + uint32_t nbspare = NumSpareAreaTowrite; + const uint16_t *buff = pBuffer; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* NAND raw address calculation */ + nandaddress = ARRAY_ADDRESS(pAddress, hnand); + + /* Column in page address */ + columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand)); + + /* Spare area(s) write loop */ + while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)))) + { + /* Cards with page size <= 512 bytes */ + if ((hnand->Config.PageSize) <= 512U) + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + else /* (hnand->Config.PageSize) > 512 */ + { + /* Send write Spare area command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0; + __DSB(); + + if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U) + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + } + else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */ + { + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress); + __DSB(); + } + } + + /* Write data to memory */ + for (index = 0U; index < hnand->Config.SpareAreaSize; index++) + { + *(__IO uint16_t *)deviceaddress = *buff; + buff++; + __DSB(); + } + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1; + __DSB(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Read status until NAND is ready */ + while (HAL_NAND_Read_Status(hnand) != NAND_READY) + { + if ((HAL_GetTick() - tickstart) > NAND_WRITE_TIMEOUT) + { + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + + return HAL_TIMEOUT; + } + } + + /* Increment written spare areas number */ + numspareareawritten++; + + /* Decrement spare areas to write */ + nbspare--; + + /* Increment the NAND address */ + nandaddress = (uint32_t)(nandaddress + 1U); + } + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief NAND memory Block erase + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, const NAND_AddressTypeDef *pAddress) +{ + uint32_t deviceaddress; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnand); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* Send Erase block command sequence */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0; + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand)); + __DSB(); + + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1; + __DSB(); + + /* Update the NAND controller state */ + hnand->State = HAL_NAND_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnand); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Increment the NAND memory address + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param pAddress pointer to NAND address structure + * @retval The new status of the increment address operation. It can be: + * - NAND_VALID_ADDRESS: When the new address is valid address + * - NAND_INVALID_ADDRESS: When the new address is invalid address + */ +uint32_t HAL_NAND_Address_Inc(const NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress) +{ + uint32_t status = NAND_VALID_ADDRESS; + + /* Increment page address */ + pAddress->Page++; + + /* Check NAND address is valid */ + if (pAddress->Page == hnand->Config.BlockSize) + { + pAddress->Page = 0; + pAddress->Block++; + + if (pAddress->Block == hnand->Config.PlaneSize) + { + pAddress->Block = 0; + pAddress->Plane++; + + if (pAddress->Plane == (hnand->Config.PlaneNbr)) + { + status = NAND_INVALID_ADDRESS; + } + } + } + + return (status); +} + +#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User NAND Callback + * To be used to override the weak predefined callback + * @param hnand : NAND handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_NAND_MSP_INIT_CB_ID NAND MspInit callback ID + * @arg @ref HAL_NAND_MSP_DEINIT_CB_ID NAND MspDeInit callback ID + * @arg @ref HAL_NAND_IT_CB_ID NAND IT callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, + pNAND_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (hnand->State == HAL_NAND_STATE_READY) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = pCallback; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = pCallback; + break; + case HAL_NAND_IT_CB_ID : + hnand->ItCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hnand->State == HAL_NAND_STATE_RESET) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = pCallback; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User NAND Callback + * NAND Callback is redirected to the weak predefined callback + * @param hnand : NAND handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_NAND_MSP_INIT_CB_ID NAND MspInit callback ID + * @arg @ref HAL_NAND_MSP_DEINIT_CB_ID NAND MspDeInit callback ID + * @arg @ref HAL_NAND_IT_CB_ID NAND IT callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hnand->State == HAL_NAND_STATE_READY) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = HAL_NAND_MspInit; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + break; + case HAL_NAND_IT_CB_ID : + hnand->ItCallback = HAL_NAND_ITCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hnand->State == HAL_NAND_STATE_RESET) + { + switch (CallbackId) + { + case HAL_NAND_MSP_INIT_CB_ID : + hnand->MspInitCallback = HAL_NAND_MspInit; + break; + case HAL_NAND_MSP_DEINIT_CB_ID : + hnand->MspDeInitCallback = HAL_NAND_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NAND interface. + +@endverbatim + * @{ + */ + + +/** + * @brief Enables dynamically NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand) +{ + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Enable ECC feature */ + (void)FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand) +{ + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Disable ECC feature */ + (void)FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically NAND ECC feature. + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @param ECCval pointer to ECC value + * @param Timeout maximum timeout to wait + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + + /* Check the NAND controller state */ + if (hnand->State == HAL_NAND_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnand->State == HAL_NAND_STATE_READY) + { + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_BUSY; + + /* Get NAND ECC value */ + status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout); + + /* Update the NAND state */ + hnand->State = HAL_NAND_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @} + */ + + +/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NAND State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NAND controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NAND state + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval HAL state + */ +HAL_NAND_StateTypeDef HAL_NAND_GetState(const NAND_HandleTypeDef *hnand) +{ + return hnand->State; +} + +/** + * @brief NAND memory read status + * @param hnand pointer to a NAND_HandleTypeDef structure that contains + * the configuration information for NAND module. + * @retval NAND status + */ +uint32_t HAL_NAND_Read_Status(const NAND_HandleTypeDef *hnand) +{ + uint32_t data; + uint32_t deviceaddress; + UNUSED(hnand); + + /* Identify the device address */ + deviceaddress = NAND_DEVICE; + + /* Send Read status operation command */ + *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS; + + /* Read status register data */ + data = *(__IO uint8_t *)deviceaddress; + + /* Return the status */ + if ((data & NAND_ERROR) == NAND_ERROR) + { + return NAND_ERROR; + } + else if ((data & NAND_READY) == NAND_READY) + { + return NAND_READY; + } + else + { + return NAND_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NAND_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nor.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nor.c new file mode 100644 index 000000000..e69cf19f2 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_nor.c @@ -0,0 +1,1642 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_nor.c + * @author MCD Application Team + * @brief NOR HAL module driver. + * This file provides a generic firmware to drive NOR memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NOR flash memories. It uses the FMC layer functions to interface + with NOR devices. This driver is used as follows: + + (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() + with control and timing parameters for both normal and extended mode. + + (+) Read NOR flash memory manufacturer code and device IDs using the function + HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef + structure declared by the function caller. + + (+) Access NOR flash memory by read/write data unit operations using the functions + HAL_NOR_Read(), HAL_NOR_Program(). + + (+) Perform NOR flash erase block/chip operations using the functions + HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip(). + + (+) Read the NOR flash CFI (common flash interface) IDs using the function + HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef + structure declared by the function caller. + + (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/ + HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation + + (+) You can monitor the NOR device HAL state by calling the function + HAL_NOR_GetState() + [..] + (@) This driver is a set of generic APIs which handle standard NOR flash operations. + If a NOR flash device contains different operations and/or implementations, + it should be implemented separately. + + *** NOR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in NOR HAL driver. + + (+) NOR_WRITE : NOR memory write data to specified address + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_NOR_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_NOR_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_NOR_Init + and HAL_NOR_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_NOR_RegisterCallback before calling HAL_NOR_DeInit + or HAL_NOR_Init function. + + When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_NOR_MODULE_ENABLED + +/** @defgroup NOR NOR + * @brief NOR driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup NOR_Private_Defines NOR Private Defines + * @{ + */ + +/* Constants to define address to set to write a command */ +#define NOR_CMD_ADDRESS_FIRST_BYTE (uint16_t)0x0AAA +#define NOR_CMD_ADDRESS_FIRST_CFI_BYTE (uint16_t)0x00AA +#define NOR_CMD_ADDRESS_SECOND_BYTE (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_THIRD_BYTE (uint16_t)0x0AAA + +#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055 +#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555 + +/* Constants to define data to program a command */ +#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0 +#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA +#define NOR_CMD_DATA_SECOND (uint16_t)0x0055 +#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090 +#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055 +#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010 +#define NOR_CMD_DATA_CFI (uint16_t)0x0098 + +#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25 +#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29 +#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30 + +#define NOR_CMD_READ_ARRAY (uint16_t)0x00FF +#define NOR_CMD_WORD_PROGRAM (uint16_t)0x0040 +#define NOR_CMD_BUFFERED_PROGRAM (uint16_t)0x00E8 +#define NOR_CMD_CONFIRM (uint16_t)0x00D0 +#define NOR_CMD_BLOCK_ERASE (uint16_t)0x0020 +#define NOR_CMD_BLOCK_UNLOCK (uint16_t)0x0060 +#define NOR_CMD_READ_STATUS_REG (uint16_t)0x0070 +#define NOR_CMD_CLEAR_STATUS_REG (uint16_t)0x0050 + +/* Mask on NOR STATUS REGISTER */ +#define NOR_MASK_STATUS_DQ4 (uint16_t)0x0010 +#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020 +#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040 +#define NOR_MASK_STATUS_DQ7 (uint16_t)0x0080 + +/* Address of the primary command set */ +#define NOR_ADDRESS_COMMAND_SET (uint16_t)0x0013 + +/* Command set code assignment (defined in JEDEC JEP137B version may 2004) */ +#define NOR_INTEL_SHARP_EXT_COMMAND_SET (uint16_t)0x0001 /* Supported in this driver */ +#define NOR_AMD_FUJITSU_COMMAND_SET (uint16_t)0x0002 /* Supported in this driver */ +#define NOR_INTEL_STANDARD_COMMAND_SET (uint16_t)0x0003 /* Not Supported in this driver */ +#define NOR_AMD_FUJITSU_EXT_COMMAND_SET (uint16_t)0x0004 /* Not Supported in this driver */ +#define NOR_WINDBOND_STANDARD_COMMAND_SET (uint16_t)0x0006 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_STANDARD_COMMAND_SET (uint16_t)0x0100 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_EXT_COMMAND_SET (uint16_t)0x0101 /* Not Supported in this driver */ +#define NOR_PAGE_WRITE_COMMAND_SET (uint16_t)0x0102 /* Not Supported in this driver */ +#define NOR_INTEL_PERFORMANCE_COMMAND_SET (uint16_t)0x0200 /* Not Supported in this driver */ +#define NOR_INTEL_DATA_COMMAND_SET (uint16_t)0x0210 /* Not Supported in this driver */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Variables NOR Private Variables + * @{ + */ + +static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B; + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NOR Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform the NOR memory Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timing pointer to NOR control timing structure + * @param ExtTiming pointer to NOR extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR handle parameter */ + if (hnor == NULL) + { + return HAL_ERROR; + } + + if (hnor->State == HAL_NOR_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnor->Lock = HAL_UNLOCKED; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspInitCallback == NULL) + { + hnor->MspInitCallback = HAL_NOR_MspInit; + } + + /* Init the low level hardware */ + hnor->MspInitCallback(hnor); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NOR_MspInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + } + + /* Initialize NOR control Interface */ + (void)FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); + + /* Initialize NOR timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); + + /* Initialize NOR extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, + hnor->Init.NSBank, hnor->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); + + /* Initialize NOR Memory Data Width*/ + if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8) + { + uwNORMemoryDataWidth = NOR_MEMORY_8B; + } + else + { + uwNORMemoryDataWidth = NOR_MEMORY_16B; + } + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + + /* Initialize the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->Init.WriteOperation == FMC_WRITE_OPERATION_DISABLE) + { + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + } + else + { + /* Get the value of the command set */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + + hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET); + + status = HAL_NOR_ReturnToReadMode(hnor); + } + + return status; +} + +/** + * @brief Perform NOR memory De-Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor) +{ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspDeInitCallback == NULL) + { + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + } + + /* DeInit the low level hardware */ + hnor->MspDeInitCallback(hnor); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_NOR_MspDeInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + + /* Configure the NOR registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); + + /* Reset the NOR controller state */ + hnor->State = HAL_NOR_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief NOR MSP Init + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP DeInit + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP Wait for Ready/Busy signal + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timeout Maximum timeout value + * @retval None + */ +__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + UNUSED(Timeout); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspWait could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NOR Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Read NOR flash IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_ID pointer to NOR ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read ID command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_AUTO_SELECT); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_AUTO_SELECT); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_AUTO_SELECT); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the NOR IDs */ + pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS); + pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE1_ADDR); + pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE2_ADDR); + pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE3_ADDR); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Returns the NOR memory to Read mode. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read data from NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress pointer to Device address + * @param pData pointer to read data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the data */ + *pData = (uint16_t)(*(__IO uint32_t *)pAddress); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Program data to NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress Device address + * @param pData pointer to the data to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send program data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_PROGRAM); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_WORD_PROGRAM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Write the data */ + NOR_WRITE(pAddress, *pData); + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Reads a half-word buffer from the NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal address to read from. + * @param pData pointer to the buffer that receives the data read from the + * NOR memory. + * @param uwBufferSize number of Half word to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint32_t deviceaddress; + uint32_t size = uwBufferSize; + uint32_t address = uwAddress; + uint16_t *data = pData; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read buffer */ + while (size > 0U) + { + *data = *(__IO uint16_t *)address; + data++; + address += 2U; + size--; + } + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a half-word buffer to the NOR memory. This function must be used + only with S29GL128P NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal start write address + * @param pData pointer to source data buffer. + * @param uwBufferSize Size of the buffer to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint16_t *p_currentaddress; + const uint16_t *p_endaddress; + uint16_t *data = pData; + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Initialize variables */ + p_currentaddress = (uint16_t *)(deviceaddress + uwAddress); + p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U * (uwBufferSize - 1U))); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + } + else + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + } + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_BUFFERED_PROGRAM); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Load Data into NOR Buffer */ + while (p_currentaddress <= p_endaddress) + { + NOR_WRITE(p_currentaddress, *data); + + data++; + p_currentaddress ++; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM); + } + else /* => hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET */ + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_CONFIRM); + } + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the specified block of the NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param BlockAddress Block to erase address + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send block erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + } + NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_UNLOCK); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_ERASE); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the entire NOR chip. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + UNUSED(Address); + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send NOR chip erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), + NOR_CMD_DATA_CHIP_ERASE); + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read NOR flash CFI IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_CFI pointer to NOR CFI IDs structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read CFI query command */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + /* read the NOR CFI information */ + pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS); + pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS); + pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS); + pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS); + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User NOR Callback + * To be used to override the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = pCallback; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User NOR Callback + * NOR Callback is redirected to the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = HAL_NOR_MspInit; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NOR Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NOR interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group4 NOR State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NOR State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NOR controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NOR controller state + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval NOR controller state + */ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor) +{ + return hnor->State; +} + +/** + * @brief Returns the NOR operation status. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @param Timeout NOR programming Timeout + * @retval NOR_Status The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR + * or HAL_NOR_STATUS_TIMEOUT + */ +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout) +{ + HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING; + uint16_t tmpsr1; + uint16_t tmpsr2; + uint32_t tickstart; + + /* Poll on NOR memory Ready/Busy signal ------------------------------------*/ + HAL_NOR_MspWait(hnor, Timeout); + + /* Get the NOR memory operation status -------------------------------------*/ + + /* Get tick */ + tickstart = HAL_GetTick(); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + while ((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_NOR_STATUS_TIMEOUT; + } + } + + /* Read NOR status register (DQ6 and DQ5) */ + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS ; + } + + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + status = HAL_NOR_STATUS_ONGOING; + } + + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS; + } + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + return HAL_NOR_STATUS_ERROR; + } + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + do + { + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr2 = *(__IO uint16_t *)(Address); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_NOR_STATUS_TIMEOUT; + } + } + } while ((tmpsr2 & NOR_MASK_STATUS_DQ7) == 0U); + + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr1 = *(__IO uint16_t *)(Address); + if ((tmpsr1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U) + { + /* Clear the Status Register */ + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + status = HAL_NOR_STATUS_ERROR; + } + else + { + status = HAL_NOR_STATUS_SUCCESS; + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_NOR_STATUS_ERROR; + } + + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd.c new file mode 100644 index 000000000..6feedd005 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd.c @@ -0,0 +1,2362 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ +#if defined (USB_OTG_FS) + const USB_OTG_GlobalTypeDef *USBx; +#endif /* defined (USB_OTG_FS) */ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + +#if defined (USB_OTG_FS) + USBx = hpcd->Instance; +#endif /* defined (USB_OTG_FS) */ + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + +#if defined (USB_OTG_FS) + /* Disable DMA mode for FS instance */ + if (USBx == USB_OTG_FS) + { + hpcd->Init.dma_enable = 0U; + } +#endif /* defined (USB_OTG_FS) */ + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Device Mode */ + if (USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + + (void)USB_DevDisconnect(hpcd->Instance); + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callback is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected + * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected + * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t i; + uint32_t ep_intr; + uint32_t epint; + uint32_t epnum; + uint32_t fifoemptymsk; + uint32_t RegVal; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + /* store current frame number */ + hpcd->FrameNumber = (USBx_DEVICE->DSTS & USB_OTG_DSTS_FNSOF_Msk) >> USB_OTG_DSTS_FNSOF_Pos; + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + /* Handle RxQLevel Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + RegVal = USBx->GRXSTSP; + + ep = &hpcd->OUT_ep[RegVal & USB_OTG_GRXSTSP_EPNUM]; + + if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if ((RegVal & USB_OTG_GRXSTSP_BCNT) != 0U) + { + (void)USB_ReadPacket(USBx, ep->xfer_buff, + (uint16_t)((RegVal & USB_OTG_GRXSTSP_BCNT) >> 4)); + + ep->xfer_buff += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + else + { + /* ... */ + } + + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0U; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + /* Class B setup phase done for previous decoded setup */ + (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + + /* Clear OUT Endpoint disable interrupt */ + if ((epint & USB_OTG_DOEPINT_EPDISD) == USB_OTG_DOEPINT_EPDISD) + { + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == USB_OTG_GINTSTS_BOUTNAKEFF) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK; + } + + ep = &hpcd->OUT_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_EPDISD); + } + + /* Clear Status Phase Received interrupt */ + if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + + /* Clear OUT NAK interrupt */ + if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0U; + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + + if (hpcd->Init.dma_enable == 1U) + { + hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; + + /* this is ZLP, so prepare EP0 for next setup */ + if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) + { + /* prepare to rx more setup packets */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + (void)USB_FlushTxFifo(USBx, epnum); + + ep = &hpcd->IN_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + (void)PCD_WriteEmptyTxFifo(hpcd, epnum); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + /* Handle Resume Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up Signaling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } + + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); + + if (hpcd->LPM_State == LPM_L0) + { + hpcd->LPM_State = LPM_L1; + hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Handle Reset Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + } + USBx_DEVICE->DAINTMSK |= 0x10001U; + + if (hpcd->Init.use_dedicated_ep1 != 0U) + { + USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM; + + USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + else + { + USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM | + USB_OTG_DOEPMSK_OTEPSPRM | + USB_OTG_DOEPMSK_NAKM; + + USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, + (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + (void)USB_ActivateSetup(hpcd->Instance); + hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); + + /* Set USB Turnaround time */ + (void)USB_SetTurnaroundTime(hpcd->Instance, + HAL_RCC_GetHCLKFreq(), + (uint8_t)hpcd->Init.speed); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle SOF Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Global OUT NAK effective Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_BOUTNAKEFF)) + { + USBx->GINTMSK &= ~USB_OTG_GINTMSK_GONAKEFFM; + + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + if (hpcd->OUT_ep[epnum].is_iso_incomplete == 1U) + { + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)epnum); + } + } + } + + /* Handle Incomplete ISO IN Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_INEP(epnum)->DIEPCTL; + + if ((hpcd->IN_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)) + { + hpcd->IN_ep[epnum].is_iso_incomplete = 1U; + + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)(epnum | 0x80U)); + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_OUTEP(epnum)->DOEPCTL; + + if ((hpcd->OUT_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) && + ((RegVal & (0x1U << 16)) == (hpcd->FrameNumber & 0x1U))) + { + hpcd->OUT_ep[epnum].is_iso_incomplete = 1U; + + USBx->GINTMSK |= USB_OTG_GINTMSK_GONAKEFFM; + + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SGONAK; + break; + } + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ConnectCallback(hpcd); +#else + HAL_PCD_ConnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + RegVal = hpcd->Instance->GOTGINT; + + if ((RegVal & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DisconnectCallback(hpcd); +#else + HAL_PCD_DisconnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + hpcd->Instance->GOTGINT |= RegVal; + } + } +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Abort an USB EP transaction. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + HAL_StatusTypeDef ret; + PCD_EPTypeDef *ep; + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + } + + /* Stop Xfer */ + ret = USB_EPStopXfer(hpcd->Instance, ep); + + return ret; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd) +{ + return hpcd->State; +} + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set the USB Device high speed test mode. + * @param hpcd PCD handle + * @param testmode USB Device high speed test mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetTestMode(const PCD_HandleTypeDef *hpcd, uint8_t testmode) +{ + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + + switch (testmode) + { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + USBx_DEVICE->DCTL |= (uint32_t)testmode << 4; + break; + + default: + break; + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Check FIFO for the next packet to be loaded. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t len; + uint32_t len32b; + uint32_t fifoemptymsk; + + ep = &hpcd->IN_ep[epnum]; + + if (ep->xfer_count > ep->xfer_len) + { + return HAL_ERROR; + } + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3U) / 4U; + + while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && + (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3U) / 4U; + + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, + (uint8_t)hpcd->Init.dma_enable); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if (ep->xfer_len <= ep->xfer_count) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT transfer complete interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_EPTypeDef *ep; + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (hpcd->Init.dma_enable == 1U) + { + if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + } + else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + ep = &hpcd->OUT_ep[epnum]; + + /* out data packet received over EP */ + ep->xfer_count = ep->xfer_size - (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); + + if (epnum == 0U) + { + if (ep->xfer_len == 0U) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + else + { + ep->xfer_buff += ep->xfer_count; + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + /* ... */ + } + } + else + { + if (gSNPSiD == USB_OTG_CORE_ID_310A) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT setup packet received interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) + { + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd_ex.c new file mode 100644 index 000000000..b412260f1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pcd_ex.c @@ -0,0 +1,400 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} + +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + + +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t gccfg_msk; + uint32_t tickstart = HAL_GetTick(); + + /* Enable DCD : Data Contact Detect */ + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; + } + else + { + USBx->GCCFG |= USB_OTG_GCCFG_DCDETEN; + } + + /* Wait for Min DCD Timeout */ + HAL_Delay(300U); + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + /* Check Detect flag */ + if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + USBx->GCCFG &= ~USB_OTG_GCCFG_DCDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_PDEN; + } + else + { + USBx->GCCFG &= ~USB_OTG_GCCFG_DCDETEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_PDETEN; + } + HAL_Delay(50U); + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + gccfg_msk = USB_OTG_GCCFG_PDET; + } + else + { + gccfg_msk = USB_OTG_GCCFG_CHGDET; + } + + if ((USBx->GCCFG & gccfg_msk) == 0U) + { + /* Case of Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_SDEN; + HAL_Delay(50U); + + gccfg_msk = USB_OTG_GCCFG_SDET; + } + else + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDETEN); + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_SDETEN; + HAL_Delay(50U); + + gccfg_msk = USB_OTG_GCCFG_FSVPLUS; + } + + if ((USBx->GCCFG & gccfg_msk) == gccfg_msk) + { + /* case Dedicated Charging Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* case Charging Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Battery Charging capability discovery finished */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); + + /* Check for the Timeout, else start USB Device */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + + /* Power Down USB transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Enable Battery charging */ + USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; + } + else + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDETEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDETEN); + } + + hpcd->battery_charging_active = 1U; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + + /* Disable Battery charging */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + } + else + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDETEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDETEN); + } + + hpcd->battery_charging_active = 0U; + + return HAL_OK; +} + +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pka.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pka.c new file mode 100644 index 000000000..5247d8618 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pka.c @@ -0,0 +1,3042 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pka.c + * @author MCD Application Team + * @brief PKA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of public key accelerator(PKA): + * + Initialization and de-initialization functions + * + Start an operation + * + Retrieve the operation result + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PKA HAL driver can be used as follows: + + (#) Declare a PKA_HandleTypeDef handle structure, for example: PKA_HandleTypeDef hpka; + + (#) Initialize the PKA low level resources by implementing the HAL_PKA_MspInit() API: + (##) Enable the PKA interface clock + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the PKA interrupt priority + (+++) Enable the NVIC PKA IRQ Channel + + (#) Initialize the PKA registers by calling the HAL_PKA_Init() API which trig + HAL_PKA_MspInit(). + + (#) Fill entirely the input structure corresponding to your operation: + For instance: PKA_ModExpInTypeDef for HAL_PKA_ModExp(). + + (#) Execute the operation (in polling or interrupt) and check the returned value. + + (#) Retrieve the result of the operation (For instance, HAL_PKA_ModExp_GetResult for + HAL_PKA_ModExp operation). The function to gather the result is different for each + kind of operation. The correspondence can be found in the following section. + + (#) Call the function HAL_PKA_DeInit() to restore the default configuration which trig + HAL_PKA_MspDeInit(). + + *** High level operation *** + ================================= + [..] + (+) Input structure requires buffers as uint8_t array. + + (+) Output structure requires buffers as uint8_t array. + + (+) Modular exponentiation using: + (++) HAL_PKA_ModExp(). + (++) HAL_PKA_ModExp_IT(). + (++) HAL_PKA_ModExpFastMode(). + (++) HAL_PKA_ModExpFastMode_IT(). + (++) HAL_PKA_ModExpProtectMode(). + (++) HAL_PKA_ModExpProtectMode_IT(). + (++) HAL_PKA_ModExp_GetResult() to retrieve the result of the operation. + + (+) RSA Chinese Remainder Theorem (CRT) using: + (++) HAL_PKA_RSACRTExp(). + (++) HAL_PKA_RSACRTExp_IT(). + (++) HAL_PKA_RSACRTExp_GetResult() to retrieve the result of the operation. + + (+) ECC Point Check using: + (++) HAL_PKA_PointCheck(). + (++) HAL_PKA_PointCheck_IT(). + (++) HAL_PKA_PointCheck_IsOnCurve() to retrieve the result of the operation. + + (+) ECDSA Sign + (++) HAL_PKA_ECDSASign(). + (++) HAL_PKA_ECDSASign_IT(). + (++) HAL_PKA_ECDSASign_GetResult() to retrieve the result of the operation. + + (+) ECDSA Verify + (++) HAL_PKA_ECDSAVerif(). + (++) HAL_PKA_ECDSAVerif_IT(). + (++) HAL_PKA_ECDSAVerif_IsValidSignature() to retrieve the result of the operation. + + (+) ECC Scalar Multiplication using: + (++) HAL_PKA_ECCMul(). + (++) HAL_PKA_ECCMul_IT(). + (++) HAL_PKA_ECCMul_GetResult() to retrieve the result of the operation. + + (+) ECC double base ladder using: + (++) HAL_PKA_ECCDoubleBaseLadder(). + (++) HAL_PKA_ECCDoubleBaseLadder_IT(). + (++) HAL_PKA_ECCDoubleBaseLadder_GetResult() to retrieve the result of the operation. + + (+) ECC projective to affine using: + (++) HAL_PKA_ECCProjective2Affine(). + (++) HAL_PKA_ECCProjective2Affine_IT(). + (++) HAL_PKA_ECCProjective2Affine_GetResult() to retrieve the result of the operation. + + (+) ECC complete addition using: + (++) HAL_PKA_ECCCompleteAddition(). + (++) HAL_PKA_ECCCompleteAddition_IT(). + (++) HAL_PKA_ECCCompleteAddition_GetResult() to retrieve the result of the operation. + + *** Low level operation *** + ================================= + [..] + (+) Input structure requires buffers as uint32_t array. + + (+) Output structure requires buffers as uint32_t array. + + (+) Arithmetic addition using: + (++) HAL_PKA_Add(). + (++) HAL_PKA_Add_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + The resulting size can be the input parameter or the input parameter size + 1 (overflow). + + (+) Arithmetic subtraction using: + (++) HAL_PKA_Sub(). + (++) HAL_PKA_Sub_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Arithmetic multiplication using: + (++) HAL_PKA_Mul(). + (++) HAL_PKA_Mul_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Comparison using: + (++) HAL_PKA_Cmp(). + (++) HAL_PKA_Cmp_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Modular addition using: + (++) HAL_PKA_ModAdd(). + (++) HAL_PKA_ModAdd_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Modular subtraction using: + (++) HAL_PKA_ModSub(). + (++) HAL_PKA_ModSub_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Modular inversion using: + (++) HAL_PKA_ModInv(). + (++) HAL_PKA_ModInv_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Modular reduction using: + (++) HAL_PKA_ModRed(). + (++) HAL_PKA_ModRed_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + (+) Montgomery multiplication using: + (++) HAL_PKA_MontgomeryMul(). + (++) HAL_PKA_MontgomeryMul_IT(). + (++) HAL_PKA_Arithmetic_GetResult() to retrieve the result of the operation. + + *** Montgomery parameter *** + ================================= + (+) For some operation, the computation of the Montgomery parameter is a prerequisite. + (+) Input structure requires buffers as uint8_t array. + (+) Output structure requires buffers as uint32_t array.(Only used inside PKA). + (+) You can compute the Montgomery parameter using: + (++) HAL_PKA_MontgomeryParam(). + (++) HAL_PKA_MontgomeryParam_IT(). + (++) HAL_PKA_MontgomeryParam_GetResult() to retrieve the result of the operation. + + *** Polling mode operation *** + =================================== + [..] + (+) When an operation is started in polling mode, the function returns when: + (++) A timeout is encounter. + (++) The operation is completed. + + *** Interrupt mode operation *** + =================================== + [..] + (+) Add HAL_PKA_IRQHandler to the IRQHandler of PKA. + (+) Enable the IRQ using HAL_NVIC_EnableIRQ(). + (+) When an operation is started in interrupt mode, the function returns immediately. + (+) When the operation is completed, the callback HAL_PKA_OperationCpltCallback is called. + (+) When an error is encountered, the callback HAL_PKA_ErrorCallback is called. + (+) To stop any operation in interrupt mode, use HAL_PKA_Abort(). + + *** Utilities *** + =================================== + [..] + (+) To clear the PKA RAM, use HAL_PKA_RAMReset(). + (+) To get current state, use HAL_PKA_GetState(). + (+) To get current error, use HAL_PKA_GetError(). + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_PKA_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_PKA_RegisterCallback() + to register an interrupt callback. + [..] + + Function HAL_PKA_RegisterCallback() allows to register following callbacks: + (+) OperationCpltCallback : callback for End of operation. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function HAL_PKA_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + HAL_PKA_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) OperationCpltCallback : callback for End of operation. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + + By default, after the HAL_PKA_Init() and when the state is HAL_PKA_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_PKA_OperationCpltCallback(), HAL_PKA_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_PKA_Init()/ HAL_PKA_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the HAL_PKA_Init()/ HAL_PKA_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in HAL_PKA_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_PKA_STATE_READY or HAL_PKA_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_PKA_RegisterCallback() before calling HAL_PKA_DeInit() + or HAL_PKA_Init() function. + [..] + + When the compilation flag USE_HAL_PKA_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(PKA) && defined(HAL_PKA_MODULE_ENABLED) + +/** @defgroup PKA PKA + * @brief PKA HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PKA_Private_Define PKA Private Define + * @{ + */ +#define PKA_RAM_SIZE 1334U + +/* Private macro -------------------------------------------------------------*/ +#define __PKA_RAM_PARAM_END(TAB,INDEX) do{ \ + TAB[INDEX] = 0UL; \ + TAB[INDEX + 1U] = 0UL; \ + } while(0) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +static uint32_t primeordersize; +static uint32_t opsize; +static uint32_t modulussize; +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup PKA_Private_Functions PKA Private Functions + * @{ + */ +uint32_t PKA_GetMode(const PKA_HandleTypeDef *hpka); +HAL_StatusTypeDef PKA_PollEndOfOperation(const PKA_HandleTypeDef *hpka, uint32_t Timeout, uint32_t Tickstart); +uint32_t PKA_CheckError(const PKA_HandleTypeDef *hpka, uint32_t mode); +uint32_t PKA_GetBitSize_u8(uint32_t byteNumber); +uint32_t PKA_GetOptBitSize_u8(uint32_t byteNumber, uint8_t msb); +uint32_t PKA_GetBitSize_u32(uint32_t wordNumber); +uint32_t PKA_GetArraySize_u8(uint32_t bitSize); +void PKA_Memcpy_u32_to_u8(uint8_t dst[], __IO const uint32_t src[], size_t n); +void PKA_Memcpy_u8_to_u32(__IO uint32_t dst[], const uint8_t src[], size_t n); +void PKA_Memcpy_u32_to_u32(__IO uint32_t dst[], __IO const uint32_t src[], size_t n); +HAL_StatusTypeDef PKA_Process(PKA_HandleTypeDef *hpka, uint32_t mode, uint32_t Timeout); +HAL_StatusTypeDef PKA_Process_IT(PKA_HandleTypeDef *hpka, uint32_t mode); +void PKA_ModExp_Set(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in); +void PKA_ModExpFastMode_Set(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in); +void PKA_ModExpProtectMode_Set(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in); +void PKA_ECCMulEx_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in); +void PKA_ECDSASign_Set(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in); +void PKA_ECDSAVerif_Set(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in); +void PKA_RSACRTExp_Set(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in); +void PKA_PointCheck_Set(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in); +void PKA_ECCMul_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in); +void PKA_ModRed_Set(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in); +void PKA_ModInv_Set(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in); +void PKA_MontgomeryParam_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint8_t *pOp1); +void PKA_ARI_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint32_t *pOp1, const uint32_t *pOp2, + const uint8_t *pOp3); +void PKA_ECCDoubleBaseLadder_Set(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in); +void PKA_ECCProjective2Affine_Set(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in); +void PKA_ECCCompleteAddition_Set(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in); +HAL_StatusTypeDef PKA_WaitOnFlagUntilTimeout(PKA_HandleTypeDef *hpka, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +uint32_t PKA_Result_GetSize(const PKA_HandleTypeDef *hpka, uint32_t Startindex, uint32_t Maxsize); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PKA_Exported_Functions PKA Exported Functions + * @{ + */ + +/** @defgroup PKA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the PKAx peripheral: + + (+) User must implement HAL_PKA_MspInit() function in which he configures + all related peripherals resources (CLOCK, IT and NVIC ). + + (+) Call the function HAL_PKA_Init() to configure the device. + + (+) Call the function HAL_PKA_DeInit() to restore the default configuration + of the selected PKAx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the PKA according to the specified + * parameters in the PKA_InitTypeDef and initialize the associated handle. + * @param hpka PKA handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Init(PKA_HandleTypeDef *hpka) +{ + HAL_StatusTypeDef err = HAL_OK; + uint32_t tickstart; + + /* Check the PKA handle allocation */ + if (hpka != NULL) + { + /* Check the parameters */ + assert_param(IS_PKA_ALL_INSTANCE(hpka->Instance)); + + if (hpka->State == HAL_PKA_STATE_RESET) + { + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) + /* Init the PKA Callback settings */ + hpka->OperationCpltCallback = HAL_PKA_OperationCpltCallback; /* Legacy weak OperationCpltCallback */ + hpka->ErrorCallback = HAL_PKA_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hpka->MspInitCallback == NULL) + { + hpka->MspInitCallback = HAL_PKA_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hpka->MspInitCallback(hpka); +#else + /* Init the low level hardware */ + HAL_PKA_MspInit(hpka); +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + } + + /* Set the state to busy */ + hpka->State = HAL_PKA_STATE_BUSY; + + /* Reset the control register and enable the PKA */ + hpka->Instance->CR = PKA_CR_EN; + + /* Get current tick */ + tickstart = HAL_GetTick(); + + /* Wait the INITOK flag Setting */ + if (PKA_WaitOnFlagUntilTimeout(hpka, PKA_SR_INITOK, RESET, tickstart, 5000) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Reset any pending flag */ + SET_BIT(hpka->Instance->CLRFR, PKA_CLRFR_PROCENDFC | PKA_CLRFR_RAMERRFC | PKA_CLRFR_ADDRERRFC | PKA_CLRFR_OPERRFC); + + /* Initialize the error code */ + hpka->ErrorCode = HAL_PKA_ERROR_NONE; + + /* Set the state to ready */ + hpka->State = HAL_PKA_STATE_READY; + } + else + { + err = HAL_ERROR; + } + + return err; +} + +/** + * @brief DeInitialize the PKA peripheral. + * @param hpka PKA handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_DeInit(PKA_HandleTypeDef *hpka) +{ + HAL_StatusTypeDef err = HAL_OK; + + /* Check the PKA handle allocation */ + if (hpka != NULL) + { + /* Check the parameters */ + assert_param(IS_PKA_ALL_INSTANCE(hpka->Instance)); + + /* Set the state to busy */ + hpka->State = HAL_PKA_STATE_BUSY; + + /* Reset the control register */ + /* This abort any operation in progress (PKA RAM content is not guaranteed in this case) */ + hpka->Instance->CR = 0; + + /* Reset any pending flag */ + SET_BIT(hpka->Instance->CLRFR, PKA_CLRFR_PROCENDFC | PKA_CLRFR_RAMERRFC | PKA_CLRFR_ADDRERRFC | PKA_CLRFR_OPERRFC); + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) + if (hpka->MspDeInitCallback == NULL) + { + hpka->MspDeInitCallback = HAL_PKA_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hpka->MspDeInitCallback(hpka); +#else + /* DeInit the low level hardware: CLOCK, NVIC */ + HAL_PKA_MspDeInit(hpka); +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + + /* Reset the error code */ + hpka->ErrorCode = HAL_PKA_ERROR_NONE; + + /* Reset the state */ + hpka->State = HAL_PKA_STATE_RESET; + } + else + { + err = HAL_ERROR; + } + + return err; +} + +/** + * @brief Initialize the PKA MSP. + * @param hpka PKA handle + * @retval None + */ +__weak void HAL_PKA_MspInit(PKA_HandleTypeDef *hpka) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpka); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PKA_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the PKA MSP. + * @param hpka PKA handle + * @retval None + */ +__weak void HAL_PKA_MspDeInit(PKA_HandleTypeDef *hpka) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpka); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PKA_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User PKA Callback + * To be used instead of the weak predefined callback + * @param hpka Pointer to a PKA_HandleTypeDef structure that contains + * the configuration information for the specified PKA. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PKA_OPERATION_COMPLETE_CB_ID End of operation callback ID + * @arg @ref HAL_PKA_ERROR_CB_ID Error callback ID + * @arg @ref HAL_PKA_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_PKA_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_RegisterCallback(PKA_HandleTypeDef *hpka, HAL_PKA_CallbackIDTypeDef CallbackID, + pPKA_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_PKA_STATE_READY == hpka->State) + { + switch (CallbackID) + { + case HAL_PKA_OPERATION_COMPLETE_CB_ID : + hpka->OperationCpltCallback = pCallback; + break; + + case HAL_PKA_ERROR_CB_ID : + hpka->ErrorCallback = pCallback; + break; + + case HAL_PKA_MSPINIT_CB_ID : + hpka->MspInitCallback = pCallback; + break; + + case HAL_PKA_MSPDEINIT_CB_ID : + hpka->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_PKA_STATE_RESET == hpka->State) + { + switch (CallbackID) + { + case HAL_PKA_MSPINIT_CB_ID : + hpka->MspInitCallback = pCallback; + break; + + case HAL_PKA_MSPDEINIT_CB_ID : + hpka->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a PKA Callback + * PKA callback is redirected to the weak predefined callback + * @param hpka Pointer to a PKA_HandleTypeDef structure that contains + * the configuration information for the specified PKA. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PKA_OPERATION_COMPLETE_CB_ID End of operation callback ID + * @arg @ref HAL_PKA_ERROR_CB_ID Error callback ID + * @arg @ref HAL_PKA_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_PKA_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_UnRegisterCallback(PKA_HandleTypeDef *hpka, HAL_PKA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_PKA_STATE_READY == hpka->State) + { + switch (CallbackID) + { + case HAL_PKA_OPERATION_COMPLETE_CB_ID : + hpka->OperationCpltCallback = HAL_PKA_OperationCpltCallback; /* Legacy weak OperationCpltCallback */ + break; + + case HAL_PKA_ERROR_CB_ID : + hpka->ErrorCallback = HAL_PKA_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_PKA_MSPINIT_CB_ID : + hpka->MspInitCallback = HAL_PKA_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_PKA_MSPDEINIT_CB_ID : + hpka->MspDeInitCallback = HAL_PKA_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_PKA_STATE_RESET == hpka->State) + { + switch (CallbackID) + { + case HAL_PKA_MSPINIT_CB_ID : + hpka->MspInitCallback = HAL_PKA_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_PKA_MSPDEINIT_CB_ID : + hpka->MspDeInitCallback = HAL_PKA_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpka->ErrorCode |= HAL_PKA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PKA_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PKA operations. + + (#) There are two modes of operation: + + (++) Blocking mode : The operation is performed in the polling mode. + These functions return when data operation is completed. + (++) No-Blocking mode : The operation is performed using Interrupts. + These functions return immediately. + The end of the operation is indicated by HAL_PKA_ErrorCallback in case of error. + The end of the operation is indicated by HAL_PKA_OperationCpltCallback in case of success. + To stop any operation in interrupt mode, use HAL_PKA_Abort(). + + (#) Blocking mode functions are : + + (++) HAL_PKA_ModExp() + (++) HAL_PKA_ModExpFastMode() + (++) HAL_PKA_ModExpProtectMode() + (++) HAL_PKA_ModExp_GetResult(); + + (++) HAL_PKA_ECDSASign() + (++) HAL_PKA_ECDSASign_GetResult(); + + (++) HAL_PKA_ECDSAVerif() + (++) HAL_PKA_ECDSAVerif_IsValidSignature(); + + (++) HAL_PKA_RSACRTExp() + (++) HAL_PKA_RSACRTExp_GetResult(); + + (++) HAL_PKA_PointCheck() + (++) HAL_PKA_PointCheck_IsOnCurve(); + + (++) HAL_PKA_ECCMul() + (++) HAL_PKA_ECCMulFastMode() + (++) HAL_PKA_ECCMul_GetResult(); + + (++) HAL_PKA_ECCMulEx() + (++) HAL_PKA_ECCDoubleBaseLadder() + (++) HAL_PKA_ECCDoubleBaseLadder_GetResult(); + (++) HAL_PKA_ECCProjective2Affine() + (++) HAL_PKA_ECCProjective2Affine_GetResult(); + (++) HAL_PKA_ECCCompleteAddition() + (++) HAL_PKA_ECCCompleteAddition_GetResult(); + + (++) HAL_PKA_Add() + (++) HAL_PKA_Sub() + (++) HAL_PKA_Cmp() + (++) HAL_PKA_Mul() + (++) HAL_PKA_ModAdd() + (++) HAL_PKA_ModSub() + (++) HAL_PKA_ModInv() + (++) HAL_PKA_ModRed() + (++) HAL_PKA_MontgomeryMul() + (++) HAL_PKA_Arithmetic_GetResult(P); + + (++) HAL_PKA_MontgomeryParam() + (++) HAL_PKA_MontgomeryParam_GetResult(); + + (#) No-Blocking mode functions with Interrupt are : + + (++) HAL_PKA_ModExp_IT(); + (++) HAL_PKA_ModExpFastMode_IT(); + (++) HAL_PKA_ModExpProtectMode_IT() + (++) HAL_PKA_ModExp_GetResult(); + + (++) HAL_PKA_ECDSASign_IT(); + (++) HAL_PKA_ECDSASign_GetResult(); + + (++) HAL_PKA_ECDSAVerif_IT(); + (++) HAL_PKA_ECDSAVerif_IsValidSignature(); + + (++) HAL_PKA_RSACRTExp_IT(); + (++) HAL_PKA_RSACRTExp_GetResult(); + + (++) HAL_PKA_PointCheck_IT(); + (++) HAL_PKA_PointCheck_IsOnCurve(); + + (++) HAL_PKA_ECCMul_IT(); + (++) HAL_PKA_ECCMulFastMode_IT(); + (++) HAL_PKA_ECCMul_GetResult(); + + (++) HAL_PKA_ECCMulEx_IT(); + (++) HAL_PKA_ECCDoubleBaseLadder_IT() + (++) HAL_PKA_ECCDoubleBaseLadder_GetResult(); + (++) HAL_PKA_ECCProjective2Affine_IT() + (++) HAL_PKA_ECCProjective2Affine_GetResult(); + (++) HAL_PKA_ECCCompleteAddition_IT() + (++) HAL_PKA_ECCCompleteAddition_GetResult(); + (++) HAL_PKA_Add_IT(); + (++) HAL_PKA_Sub_IT(); + (++) HAL_PKA_Cmp_IT(); + (++) HAL_PKA_Mul_IT(); + (++) HAL_PKA_ModAdd_IT(); + (++) HAL_PKA_ModSub_IT(); + (++) HAL_PKA_ModInv_IT(); + (++) HAL_PKA_ModRed_IT(); + (++) HAL_PKA_MontgomeryMul_IT(); + (++) HAL_PKA_Arithmetic_GetResult(); + + (++) HAL_PKA_MontgomeryParam_IT(); + (++) HAL_PKA_MontgomeryParam_GetResult(); + + (++) HAL_PKA_Abort(); + +@endverbatim + * @{ + */ + +/** + * @brief Modular exponentiation in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExp(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExp_Set(hpka, in); + + opsize = in->OpSize; + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_EXP, Timeout); +} + +/** + * @brief Modular exponentiation in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExp_IT(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExp_Set(hpka, in); + + opsize = in->OpSize; + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_EXP); +} + +/** + * @brief Modular exponentiation in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExpFastMode(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExpFastMode_Set(hpka, in); + + opsize = in->OpSize; + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_EXP_FAST_MODE, Timeout); +} + +/** + * @brief Modular exponentiation in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExpFastMode_IT(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExpFastMode_Set(hpka, in); + + opsize = in->OpSize; + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_EXP_FAST_MODE); +} + +/** + * @brief Modular exponentiation (protected) in blocking mode. + * Useful when a secret information is involved (RSA decryption) + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExpProtectMode(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in, + uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExpProtectMode_Set(hpka, in); + + opsize = in->OpSize; + + return PKA_Process(hpka, PKA_MODE_MODULAR_EXP_PROTECT, Timeout); +} + +/** + * @brief Modular exponentiation (protected) in non-blocking mode with Interrupt. + * Useful when a secret information is involved (RSA decryption) + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModExpProtectMode_IT(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ModExpProtectMode_Set(hpka, in); + + opsize = in->OpSize; + + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_EXP_PROTECT); +} + + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param pRes Output buffer + * @retval HAL status + */ +void HAL_PKA_ModExp_GetResult(PKA_HandleTypeDef *hpka, uint8_t *pRes) +{ + uint32_t size; + + /* Get output result size */ + size = opsize; + + /* Move the result to appropriate location (indicated in out parameter) */ + PKA_Memcpy_u32_to_u8(pRes, &hpka->Instance->RAM[PKA_MODULAR_EXP_OUT_RESULT], size); +} + +/** + * @brief Sign a message using elliptic curves over prime fields in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECDSASign(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECDSASign_Set(hpka, in); + + primeordersize = in->primeOrderSize; + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ECDSA_SIGNATURE, Timeout); +} + +/** + * @brief Sign a message using elliptic curves over prime fields in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECDSASign_IT(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECDSASign_Set(hpka, in); + + primeordersize = in->primeOrderSize; + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ECDSA_SIGNATURE); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param out Output information + * @param outExt Additional Output information (facultative) + */ +void HAL_PKA_ECDSASign_GetResult(PKA_HandleTypeDef *hpka, PKA_ECDSASignOutTypeDef *out, + PKA_ECDSASignOutExtParamTypeDef *outExt) +{ + uint32_t size; + + /* Get output result size */ + size = primeordersize; + + + if (out != NULL) + { + PKA_Memcpy_u32_to_u8(out->RSign, &hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_SIGNATURE_R], size); + PKA_Memcpy_u32_to_u8(out->SSign, &hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_SIGNATURE_S], size); + } + + /* If user requires the additional information */ + if (outExt != NULL) + { + /* Move the result to appropriate location (indicated in outExt parameter) */ + PKA_Memcpy_u32_to_u8(outExt->ptX, &hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_FINAL_POINT_X], size); + PKA_Memcpy_u32_to_u8(outExt->ptY, &hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y], size); + } +} + +/** + * @brief Verify the validity of a signature using elliptic curves over prime fields in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECDSAVerif(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECDSAVerif_Set(hpka, in); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ECDSA_VERIFICATION, Timeout); +} + +/** + * @brief Verify the validity of a signature using elliptic curves + * over prime fields in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECDSAVerif_IT(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECDSAVerif_Set(hpka, in); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ECDSA_VERIFICATION); +} + +/** + * @brief Return the result of the ECDSA verification operation. + * @param hpka PKA handle + * @retval 1 if signature is verified, 0 in other case + */ +uint32_t HAL_PKA_ECDSAVerif_IsValidSignature(PKA_HandleTypeDef const *const hpka) +{ + return (hpka->Instance->RAM[PKA_ECDSA_VERIF_OUT_RESULT] == 0xD60DU) ? 1UL : 0UL; +} + +/** + * @brief RSA CRT exponentiation in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_RSACRTExp(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_RSACRTExp_Set(hpka, in); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_RSA_CRT_EXP, Timeout); +} + +/** + * @brief RSA CRT exponentiation in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_RSACRTExp_IT(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_RSACRTExp_Set(hpka, in); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_RSA_CRT_EXP); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param pRes Pointer to memory location to receive the result of the operation + * @retval HAL status + */ +void HAL_PKA_RSACRTExp_GetResult(PKA_HandleTypeDef *hpka, uint8_t *pRes) +{ + uint32_t size; + + /* Move the result to appropriate location (indicated in out parameter) */ + size = (hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_MOD_NB_BITS] + 7UL) / 8UL; + + PKA_Memcpy_u32_to_u8(pRes, &hpka->Instance->RAM[PKA_RSA_CRT_EXP_OUT_RESULT], size); +} + +/** + * @brief Point on elliptic curve check in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_PointCheck(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_PointCheck_Set(hpka, in); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_POINT_CHECK, Timeout); +} + +/** + * @brief Point on elliptic curve check in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_PointCheck_IT(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_PointCheck_Set(hpka, in); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_POINT_CHECK); +} + +/** + * @brief Return the result of the point check operation. + * @param hpka PKA handle + * @retval 1 if point is on curve, 0 in other case + */ +uint32_t HAL_PKA_PointCheck_IsOnCurve(PKA_HandleTypeDef const *const hpka) +{ +#define PKA_POINT_IS_ON_CURVE 0xD60DUL + /* Invert the value of the PKA RAM containing the result of the operation */ + return (hpka->Instance->RAM[PKA_POINT_CHECK_OUT_ERROR] == PKA_POINT_IS_ON_CURVE) ? 1UL : 0UL; +} + +/** + * @brief ECC scalar multiplication in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCMul(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCMul_Set(hpka, in); + + modulussize = in->modulusSize; + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ECC_MUL, Timeout); +} + +/** + * @brief ECC scalar multiplication in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCMul_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCMul_Set(hpka, in); + + modulussize = in->modulusSize; + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ECC_MUL); +} +/** + * @brief ECC scalar multiplication extended in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCMulEx(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCMulEx_Set(hpka, in); + + modulussize = in->modulusSize; + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ECC_MUL, Timeout); +} + +/** + * @brief ECC scalar multiplication extended in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCMulEx_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCMulEx_Set(hpka, in); + + modulussize = in->modulusSize; + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ECC_MUL); +} +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param out Output information + * @retval HAL status + */ +void HAL_PKA_ECCMul_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCMulOutTypeDef *out) +{ + uint32_t size; + + /* Get output result size */ + size = modulussize; + + /* If a destination buffer is provided */ + if (out != NULL) + { + /* Move the result to appropriate location (indicated in out parameter) */ + PKA_Memcpy_u32_to_u8(out->ptX, &hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_OUT_RESULT_X], size); + PKA_Memcpy_u32_to_u8(out->ptY, &hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_OUT_RESULT_Y], size); + } +} + +/** + * @brief Arithmetic addition in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Add(PKA_HandleTypeDef *hpka, PKA_AddInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ARITHMETIC_ADD, Timeout); +} + +/** + * @brief Arithmetic addition in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Add_IT(PKA_HandleTypeDef *hpka, PKA_AddInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ARITHMETIC_ADD); +} + +/** + * @brief Arithmetic subtraction in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Sub(PKA_HandleTypeDef *hpka, PKA_SubInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ARITHMETIC_SUB, Timeout); +} + +/** + * @brief Arithmetic subtraction in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Sub_IT(PKA_HandleTypeDef *hpka, PKA_SubInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ARITHMETIC_SUB); +} + +/** + * @brief Arithmetic multiplication in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Mul(PKA_HandleTypeDef *hpka, PKA_MulInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_ARITHMETIC_MUL, Timeout); +} + +/** + * @brief Arithmetic multiplication in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Mul_IT(PKA_HandleTypeDef *hpka, PKA_MulInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_ARITHMETIC_MUL); +} + +/** + * @brief Comparison in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Cmp(PKA_HandleTypeDef *hpka, PKA_CmpInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_COMPARISON, Timeout); +} + +/** + * @brief Comparison in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Cmp_IT(PKA_HandleTypeDef *hpka, PKA_CmpInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, NULL); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_COMPARISON); +} + +/** + * @brief Modular addition in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModAdd(PKA_HandleTypeDef *hpka, PKA_ModAddInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_ADD, Timeout); +} + +/** + * @brief Modular addition in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModAdd_IT(PKA_HandleTypeDef *hpka, PKA_ModAddInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_ADD); +} + +/** + * @brief Modular inversion in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModInv(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ModInv_Set(hpka, in); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_INV, Timeout); +} + +/** + * @brief Modular inversion in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModInv_IT(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ModInv_Set(hpka, in); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_INV); +} + +/** + * @brief Modular subtraction in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModSub(PKA_HandleTypeDef *hpka, PKA_ModSubInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_SUB, Timeout); +} + +/** + * @brief Modular subtraction in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModSub_IT(PKA_HandleTypeDef *hpka, PKA_ModSubInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_SUB); +} + +/** + * @brief Modular reduction in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModRed(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ModRed_Set(hpka, in); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MODULAR_RED, Timeout); +} + +/** + * @brief Modular reduction in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ModRed_IT(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ModRed_Set(hpka, in); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MODULAR_RED); +} + +/** + * @brief Montgomery multiplication in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_MontgomeryMul(PKA_HandleTypeDef *hpka, PKA_MontgomeryMulInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MONTGOMERY_MUL, Timeout); +} + +/** + * @brief Montgomery multiplication in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_MontgomeryMul_IT(PKA_HandleTypeDef *hpka, PKA_MontgomeryMulInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ARI_Set(hpka, in->size, in->pOp1, in->pOp2, in->pOp3); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MONTGOMERY_MUL); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param pRes Pointer to memory location to receive the result of the operation + */ +void HAL_PKA_Arithmetic_GetResult(PKA_HandleTypeDef *hpka, uint32_t *pRes) +{ + uint32_t mode = (hpka->Instance->CR & PKA_CR_MODE_Msk) >> PKA_CR_MODE_Pos; + uint32_t size = 0; + + /* Move the result to appropriate location (indicated in pRes parameter) */ + switch (mode) + { + case PKA_MODE_MONTGOMERY_PARAM: + case PKA_MODE_ARITHMETIC_SUB: + case PKA_MODE_MODULAR_ADD: + case PKA_MODE_MODULAR_RED: + case PKA_MODE_MODULAR_INV: + case PKA_MODE_MONTGOMERY_MUL: + size = hpka->Instance->RAM[2] / 32UL; + break; + case PKA_MODE_ARITHMETIC_ADD: + case PKA_MODE_MODULAR_SUB: + size = hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_NB_BITS] / 32UL; + + /* Manage the overflow of the addition */ + if (hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_OUT_RESULT + size] != 0UL) + { + size += 1UL; + } + + break; + case PKA_MODE_COMPARISON: + size = 1; + break; + case PKA_MODE_ARITHMETIC_MUL: + size = hpka->Instance->RAM[PKA_ARITHMETIC_MUL_NB_BITS] / 32UL * 2UL; + break; + default: + break; + } + + if (pRes != NULL) + { + switch (mode) + { + case PKA_MODE_ARITHMETIC_SUB: + case PKA_MODE_MODULAR_ADD: + case PKA_MODE_MODULAR_RED: + case PKA_MODE_MODULAR_INV: + case PKA_MODE_MODULAR_SUB: + case PKA_MODE_MONTGOMERY_MUL: + case PKA_MODE_ARITHMETIC_ADD: + case PKA_MODE_COMPARISON: + case PKA_MODE_ARITHMETIC_MUL: + PKA_Memcpy_u32_to_u32(pRes, &hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_OUT_RESULT], size); + break; + default: + break; + } + } +} + +/** + * @brief Montgomery parameter computation in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_MontgomeryParam(PKA_HandleTypeDef *hpka, PKA_MontgomeryParamInTypeDef *in, uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_MontgomeryParam_Set(hpka, in->size, in->pOp1); + + /* Start the operation */ + return PKA_Process(hpka, PKA_MODE_MONTGOMERY_PARAM, Timeout); +} + +/** + * @brief Montgomery parameter computation in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_MontgomeryParam_IT(PKA_HandleTypeDef *hpka, PKA_MontgomeryParamInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_MontgomeryParam_Set(hpka, in->size, in->pOp1); + + /* Start the operation */ + return PKA_Process_IT(hpka, PKA_MODE_MONTGOMERY_PARAM); +} + +/** + * @brief ECC double base ladder in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCDoubleBaseLadder(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in, + uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCDoubleBaseLadder_Set(hpka, in); + + return PKA_Process(hpka, PKA_MODE_DOUBLE_BASE_LADDER, Timeout); +} + +/** + * @brief ECC double base ladder in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCDoubleBaseLadder_IT(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCDoubleBaseLadder_Set(hpka, in); + + return PKA_Process_IT(hpka, PKA_MODE_DOUBLE_BASE_LADDER); +} + +/** + * @brief ECC projective to affine in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCProjective2Affine(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in, + uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCProjective2Affine_Set(hpka, in); + + return PKA_Process(hpka, PKA_MODE_ECC_PROJECTIVE_AFF, Timeout); +} + +/** + * @brief ECC projective to affine in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCProjective2Affine_IT(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCProjective2Affine_Set(hpka, in); + + return PKA_Process_IT(hpka, PKA_MODE_ECC_PROJECTIVE_AFF); +} + +/** + * @brief ECC complete addition in blocking mode. + * @param hpka PKA handle + * @param in Input information + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCCompleteAddition(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in, + uint32_t Timeout) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCCompleteAddition_Set(hpka, in); + + return PKA_Process(hpka, PKA_MODE_ECC_COMPLETE_ADD, Timeout); +} + +/** + * @brief ECC complete addition in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param in Input information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_ECCCompleteAddition_IT(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in) +{ + /* Set input parameter in PKA RAM */ + PKA_ECCCompleteAddition_Set(hpka, in); + + return PKA_Process_IT(hpka, PKA_MODE_ECC_COMPLETE_ADD); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param pRes pointer to buffer where the result will be copied + * @retval HAL status + */ +void HAL_PKA_MontgomeryParam_GetResult(PKA_HandleTypeDef *hpka, uint32_t *pRes) +{ + uint32_t size; + + /* Retrieve the size of the buffer from the PKA RAM */ + size = (hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS] + 31UL) / 32UL; + + /* Move the result to appropriate location (indicated in out parameter) */ + PKA_Memcpy_u32_to_u32(pRes, &hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_OUT_PARAMETER], size); +} + +/** + * @brief Abort any ongoing operation. + * @param hpka PKA handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PKA_Abort(PKA_HandleTypeDef *hpka) +{ + HAL_StatusTypeDef err = HAL_OK; + + /* Clear EN bit */ + /* This abort any operation in progress (PKA RAM content is not guaranteed in this case) */ + CLEAR_BIT(hpka->Instance->CR, PKA_CR_EN); + SET_BIT(hpka->Instance->CR, PKA_CR_EN); + + /* Reset any pending flag */ + SET_BIT(hpka->Instance->CLRFR, PKA_CLRFR_PROCENDFC | PKA_CLRFR_RAMERRFC | PKA_CLRFR_ADDRERRFC | PKA_CLRFR_OPERRFC); + + /* Reset the error code */ + hpka->ErrorCode = HAL_PKA_ERROR_NONE; + + /* Reset the state */ + hpka->State = HAL_PKA_STATE_READY; + + return err; +} + +/** + * @brief Reset the PKA RAM. + * @param hpka PKA handle + * @retval None + */ +void HAL_PKA_RAMReset(PKA_HandleTypeDef *hpka) +{ + uint32_t index; + + /* For each element in the PKA RAM */ + for (index = 0; index < PKA_RAM_SIZE; index++) + { + /* Clear the content */ + hpka->Instance->RAM[index] = 0UL; + } +} + +/** + * @brief This function handles PKA event interrupt request. + * @param hpka PKA handle + * @retval None + */ +void HAL_PKA_IRQHandler(PKA_HandleTypeDef *hpka) +{ + uint32_t mode = PKA_GetMode(hpka); + uint32_t itsource = READ_REG(hpka->Instance->CR); + uint32_t flag = READ_REG(hpka->Instance->SR); + + /* Address error interrupt occurred */ + if (((itsource & PKA_IT_ADDRERR) == PKA_IT_ADDRERR) && ((flag & PKA_FLAG_ADDRERR) == PKA_FLAG_ADDRERR)) + { + hpka->ErrorCode |= HAL_PKA_ERROR_ADDRERR; + + /* Clear ADDRERR flag */ + __HAL_PKA_CLEAR_FLAG(hpka, PKA_FLAG_ADDRERR); + } + + /* RAM access error interrupt occurred */ + if (((itsource & PKA_IT_RAMERR) == PKA_IT_RAMERR) && ((flag & PKA_FLAG_RAMERR) == PKA_FLAG_RAMERR)) + { + hpka->ErrorCode |= HAL_PKA_ERROR_RAMERR; + + /* Clear RAMERR flag */ + __HAL_PKA_CLEAR_FLAG(hpka, PKA_FLAG_RAMERR); + } + + /* OPERATION access error interrupt occurred */ + if (((itsource & PKA_IT_OPERR) == PKA_IT_OPERR) && ((flag & PKA_FLAG_OPERR) == PKA_FLAG_OPERR)) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + + /* Clear OPERR flag */ + __HAL_PKA_CLEAR_FLAG(hpka, PKA_FLAG_OPERR); + } + + /* Check the operation success in case of ECDSA signature */ + switch (mode) + { + case PKA_MODE_ECDSA_SIGNATURE : + /* If error output result is different from no error, operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_ERROR] != PKA_NO_ERROR) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + } + break; + + case PKA_MODE_DOUBLE_BASE_LADDER : + /* If error output result is different from no error, operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_OUT_ERROR] != PKA_NO_ERROR) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + } + break; + + case PKA_MODE_ECC_PROJECTIVE_AFF : + /* If error output result is different from no error, operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_OUT_ERROR] != PKA_NO_ERROR) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + } + break; + + case PKA_MODE_ECC_MUL : + /* If error output result is different from no error, operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_OUT_ERROR] != PKA_NO_ERROR) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + } + break; + + case PKA_MODE_MODULAR_EXP_PROTECT : + /* If error output result is different from no error, operation need to be repeated */ + if (hpka->Instance->RAM[PKA_MODULAR_EXP_OUT_ERROR] != PKA_NO_ERROR) + { + hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; + } + break; + default : + break; + } + /* Trigger the error callback if an error is present */ + if (hpka->ErrorCode != HAL_PKA_ERROR_NONE) + { +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) + hpka->ErrorCallback(hpka); +#else + HAL_PKA_ErrorCallback(hpka); +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + } + + /* End Of Operation interrupt occurred */ + if (((itsource & PKA_IT_PROCEND) == PKA_IT_PROCEND) && ((flag & PKA_FLAG_PROCEND) == PKA_FLAG_PROCEND)) + { + /* Clear PROCEND flag */ + __HAL_PKA_CLEAR_FLAG(hpka, PKA_FLAG_PROCEND); + + /* Set the state to ready */ + hpka->State = HAL_PKA_STATE_READY; + +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) + hpka->OperationCpltCallback(hpka); +#else + HAL_PKA_OperationCpltCallback(hpka); +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Process completed callback. + * @param hpka PKA handle + * @retval None + */ +__weak void HAL_PKA_OperationCpltCallback(PKA_HandleTypeDef *hpka) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpka); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PKA_OperationCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Error callback. + * @param hpka PKA handle + * @retval None + */ +__weak void HAL_PKA_ErrorCallback(PKA_HandleTypeDef *hpka) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpka); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PKA_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PKA_Exported_Functions_Group3 Peripheral State and Error functions + * @brief Peripheral State and Error functions + * + @verbatim + =============================================================================== + ##### Peripheral State and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PKA handle state. + * @param hpka PKA handle + * @retval HAL status + */ +HAL_PKA_StateTypeDef HAL_PKA_GetState(const PKA_HandleTypeDef *hpka) +{ + /* Return PKA handle state */ + return hpka->State; +} + +/** + * @brief Return the PKA error code. + * @param hpka PKA handle + * @retval PKA error code + */ +uint32_t HAL_PKA_GetError(const PKA_HandleTypeDef *hpka) +{ + /* Return PKA handle error code */ + return hpka->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup PKA_Private_Functions + * @{ + */ + +/** + * @brief Get PKA operating mode. + * @param hpka PKA handle + * @retval Return the current mode + */ +uint32_t PKA_GetMode(const PKA_HandleTypeDef *hpka) +{ + /* return the shifted PKA_CR_MODE value */ + return (uint32_t)(READ_BIT(hpka->Instance->CR, PKA_CR_MODE) >> PKA_CR_MODE_Pos); +} + +/** + * @brief Wait for operation completion or timeout. + * @param hpka PKA handle + * @param Timeout Timeout duration in millisecond. + * @param Tickstart Tick start value + * @retval HAL status + */ +HAL_StatusTypeDef PKA_PollEndOfOperation(const PKA_HandleTypeDef *hpka, uint32_t Timeout, uint32_t Tickstart) +{ + /* Wait for the end of operation or timeout */ + while ((hpka->Instance->SR & PKA_SR_PROCENDF) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0UL)) + { + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Return a hal error code based on PKA error flags. + * @param hpka PKA handle + * @param mode PKA operating mode + * @retval error code + */ +uint32_t PKA_CheckError(const PKA_HandleTypeDef *hpka, uint32_t mode) +{ + uint32_t err = HAL_PKA_ERROR_NONE; + + /* Check RAMERR error */ + if (__HAL_PKA_GET_FLAG(hpka, PKA_FLAG_RAMERR) == SET) + { + err |= HAL_PKA_ERROR_RAMERR; + } + + /* Check ADDRERR error */ + if (__HAL_PKA_GET_FLAG(hpka, PKA_FLAG_ADDRERR) == SET) + { + err |= HAL_PKA_ERROR_ADDRERR; + } + + /* Check OPEERR error */ + if (__HAL_PKA_GET_FLAG(hpka, PKA_FLAG_OPERR) == SET) + { + err |= HAL_PKA_ERROR_OPERATION; + } + + /* Check the operation success in case of ECDSA signature */ + if (mode == PKA_MODE_ECDSA_SIGNATURE) + { +#define EDCSA_SIGN_NOERROR PKA_NO_ERROR + /* If error output result is different from no error, ecsa sign operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_ERROR] != EDCSA_SIGN_NOERROR) + { + err |= HAL_PKA_ERROR_OPERATION; + } + } + + /* Check the operation success in case of ECC double base ladder*/ + if (mode == PKA_MODE_DOUBLE_BASE_LADDER) + { + /* If error output result is different from no error, PKA operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_OUT_ERROR] != PKA_NO_ERROR) + { + err |= HAL_PKA_ERROR_OPERATION; + } + } + + /* Check the operation success in case of ECC projective to affine*/ + if (mode == PKA_MODE_ECC_PROJECTIVE_AFF) + { + /* If error output result is different from no error, PKA operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_OUT_ERROR] != PKA_NO_ERROR) + { + err |= HAL_PKA_ERROR_OPERATION; + } + } + + /* Check the operation success in case of ECC Fp scalar multiplication*/ + if (mode == PKA_MODE_ECC_MUL) + { + /* If error output result is different from no error, PKA operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_OUT_ERROR] != PKA_NO_ERROR) + { + err |= HAL_PKA_ERROR_OPERATION; + } + } + + /* Check the operation success in case of protected modular exponentiation*/ + if (mode == PKA_MODE_MODULAR_EXP_PROTECT) + { + /* If error output result is different from no error, PKA operation need to be repeated */ + if (hpka->Instance->RAM[PKA_MODULAR_EXP_OUT_ERROR] != PKA_NO_ERROR) + { + err |= HAL_PKA_ERROR_OPERATION; + } + } + + return err; +} + +/** + * @brief Get number of bits inside an array of u8. + * @param byteNumber Number of u8 inside the array + */ +uint32_t PKA_GetBitSize_u8(uint32_t byteNumber) +{ + /* Convert from number of uint8_t in an array to the associated number of bits in this array */ + return byteNumber * 8UL; +} + +/** + * @brief Get optimal number of bits inside an array of u8. + * @param byteNumber Number of u8 inside the array + * @param msb Most significant uint8_t of the array + */ +uint32_t PKA_GetOptBitSize_u8(uint32_t byteNumber, uint8_t msb) +{ + uint32_t position; + + position = 32UL - __CLZ(msb); + + return (((byteNumber - 1UL) * 8UL) + position); +} + +/** + * @brief Get number of bits inside an array of u32. + * @param wordNumber Number of u32 inside the array + */ +uint32_t PKA_GetBitSize_u32(uint32_t wordNumber) +{ + /* Convert from number of uint32_t in an array to the associated number of bits in this array */ + return wordNumber * 32UL; +} + +/** + * @brief Get number of uint8_t element in an array of bitSize bits. + * @param bitSize Number of bits in an array + */ +uint32_t PKA_GetArraySize_u8(uint32_t bitSize) +{ + /* Manage the non aligned on uint8_t bitsize: */ + /* 512 bits requires 64 uint8_t */ + /* 521 bits requires 66 uint8_t */ + return ((bitSize + 7UL) / 8UL); +} + +/** + * @brief Copy uint32_t array to uint8_t array to fit PKA number representation. + * @param dst Pointer to destination + * @param src Pointer to source + * @param n Number of uint8_t to copy + * @retval dst + */ +void PKA_Memcpy_u32_to_u8(uint8_t dst[], __IO const uint32_t src[], size_t n) +{ + if (dst != NULL) + { + if (src != NULL) + { + uint32_t index_uint32_t = 0UL; /* This index is used outside of the loop */ + + for (; index_uint32_t < (n / 4UL); index_uint32_t++) + { + /* Avoid casting from uint8_t* to uint32_t* by copying 4 uint8_t in a row */ + /* Apply __REV equivalent */ + uint32_t index_uint8_t = n - 4UL - (index_uint32_t * 4UL); + dst[index_uint8_t + 3UL] = (uint8_t)((src[index_uint32_t] & 0x000000FFU)); + dst[index_uint8_t + 2UL] = (uint8_t)((src[index_uint32_t] & 0x0000FF00U) >> 8UL); + dst[index_uint8_t + 1UL] = (uint8_t)((src[index_uint32_t] & 0x00FF0000U) >> 16UL); + dst[index_uint8_t + 0UL] = (uint8_t)((src[index_uint32_t] & 0xFF000000U) >> 24UL); + } + + /* Manage the buffers not aligned on uint32_t */ + if ((n % 4UL) == 1UL) + { + dst[0UL] = (uint8_t)((src[index_uint32_t] & 0x000000FFU)); + } + else if ((n % 4UL) == 2UL) + { + dst[1UL] = (uint8_t)((src[index_uint32_t] & 0x000000FFU)); + dst[0UL] = (uint8_t)((src[index_uint32_t] & 0x0000FF00U) >> 8UL); + } + else if ((n % 4UL) == 3UL) + { + dst[2UL] = (uint8_t)((src[index_uint32_t] & 0x000000FFU)); + dst[1UL] = (uint8_t)((src[index_uint32_t] & 0x0000FF00U) >> 8UL); + dst[0UL] = (uint8_t)((src[index_uint32_t] & 0x00FF0000U) >> 16UL); + } + else + { + /* The last element is already handle in the loop */ + } + } + } +} + +/** + * @brief Copy uint8_t array to uint32_t array to fit PKA number representation. + * @param dst Pointer to destination + * @param src Pointer to source + * @param n Number of uint8_t to copy (must be multiple of 4) + * @retval dst + */ +void PKA_Memcpy_u8_to_u32(__IO uint32_t dst[], const uint8_t src[], size_t n) +{ + if (dst != NULL) + { + if (src != NULL) + { + uint32_t index = 0UL; /* This index is used outside of the loop */ + + for (; index < (n / 4UL); index++) + { + /* Apply the equivalent of __REV from uint8_t to uint32_t */ + dst[index] = ((uint32_t)src[(n - (index * 4UL) - 1UL)]) \ + | ((uint32_t)src[(n - (index * 4UL) - 2UL)] << 8UL) \ + | ((uint32_t)src[(n - (index * 4UL) - 3UL)] << 16UL) \ + | ((uint32_t)src[(n - (index * 4UL) - 4UL)] << 24UL); + } + + /* Manage the buffers not aligned on uint32_t */ + if ((n % 4UL) == 1UL) + { + dst[index] = (uint32_t)src[(n - (index * 4UL) - 1UL)]; + } + else if ((n % 4UL) == 2UL) + { + dst[index] = ((uint32_t)src[(n - (index * 4UL) - 1UL)]) \ + | ((uint32_t)src[(n - (index * 4UL) - 2UL)] << 8UL); + } + else if ((n % 4UL) == 3UL) + { + dst[index] = ((uint32_t)src[(n - (index * 4UL) - 1UL)]) \ + | ((uint32_t)src[(n - (index * 4UL) - 2UL)] << 8UL) \ + | ((uint32_t)src[(n - (index * 4UL) - 3UL)] << 16UL); + } + else + { + /* The last element is already handle in the loop */ + } + } + } +} + +/** + * @brief Copy uint32_t array to uint32_t array. + * @param dst Pointer to destination + * @param src Pointer to source + * @param n Number of u32 to be handled + * @retval dst + */ +void PKA_Memcpy_u32_to_u32(__IO uint32_t dst[], __IO const uint32_t src[], size_t n) +{ + /* If a destination buffer is provided */ + if (dst != NULL) + { + /* If a source buffer is provided */ + if (src != NULL) + { + /* For each element in the array */ + for (uint32_t index = 0UL; index < n; index++) + { + /* Copy the content */ + dst[index] = src[index]; + } + } + } +} + +/** + * @brief Generic function to start a PKA operation in blocking mode. + * @param hpka PKA handle + * @param mode PKA operation + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef PKA_Process(PKA_HandleTypeDef *hpka, uint32_t mode, uint32_t Timeout) +{ + HAL_StatusTypeDef err = HAL_OK; + uint32_t tickstart; + + if (hpka->State == HAL_PKA_STATE_READY) + { + /* Set the state to busy */ + hpka->State = HAL_PKA_STATE_BUSY; + + /* Clear any pending error */ + hpka->ErrorCode = HAL_PKA_ERROR_NONE; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Set the mode and deactivate the interrupts */ + MODIFY_REG(hpka->Instance->CR, PKA_CR_MODE | PKA_CR_PROCENDIE | PKA_CR_RAMERRIE | PKA_CR_ADDRERRIE | PKA_CR_OPERRIE, + mode << PKA_CR_MODE_Pos); + + /* Start the computation */ + hpka->Instance->CR |= PKA_CR_START; + + /* Wait for the end of operation or timeout */ + if (PKA_PollEndOfOperation(hpka, Timeout, tickstart) != HAL_OK) + { + /* Abort any ongoing operation */ + CLEAR_BIT(hpka->Instance->CR, PKA_CR_EN); + + hpka->ErrorCode |= HAL_PKA_ERROR_TIMEOUT; + + /* Make ready for the next operation */ + SET_BIT(hpka->Instance->CR, PKA_CR_EN); + } + + /* Check error */ + hpka->ErrorCode |= PKA_CheckError(hpka, mode); + + /* Clear all flags */ + hpka->Instance->CLRFR |= (PKA_CLRFR_PROCENDFC | PKA_CLRFR_RAMERRFC | PKA_CLRFR_ADDRERRFC | PKA_CLRFR_OPERRFC); + + /* Set the state to ready */ + hpka->State = HAL_PKA_STATE_READY; + + /* Manage the result based on encountered errors */ + if (hpka->ErrorCode != HAL_PKA_ERROR_NONE) + { + err = HAL_ERROR; + } + } + else + { + err = HAL_ERROR; + } + return err; +} + +/** + * @brief Generic function to start a PKA operation in non-blocking mode with Interrupt. + * @param hpka PKA handle + * @param mode PKA operation + * @retval HAL status + */ +HAL_StatusTypeDef PKA_Process_IT(PKA_HandleTypeDef *hpka, uint32_t mode) +{ + HAL_StatusTypeDef err = HAL_OK; + + if (hpka->State == HAL_PKA_STATE_READY) + { + /* Set the state to busy */ + hpka->State = HAL_PKA_STATE_BUSY; + + /* Clear any pending error */ + hpka->ErrorCode = HAL_PKA_ERROR_NONE; + + /* Set the mode and activate interrupts */ + MODIFY_REG(hpka->Instance->CR, PKA_CR_MODE | PKA_CR_PROCENDIE | PKA_CR_RAMERRIE | PKA_CR_ADDRERRIE | PKA_CR_OPERRIE, + (mode << PKA_CR_MODE_Pos) | PKA_CR_PROCENDIE | PKA_CR_RAMERRIE | PKA_CR_ADDRERRIE | PKA_CR_OPERRIE); + + /* Start the computation */ + hpka->Instance->CR |= PKA_CR_START; + } + else + { + err = HAL_ERROR; + } + return err; +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ModExp_Set(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_OP_NB_BITS] = PKA_GetBitSize_u8(in->OpSize); + + /* Get the number of bit of the exponent */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXP_NB_BITS] = PKA_GetBitSize_u8(in->expSize); + + /* Move the input parameters pOp1 to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE], in->pOp1, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT_BASE + ((in->OpSize + 3UL) / 4UL)); + + /* Move the exponent to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT], in->pExp, in->expSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT + ((in->expSize + 3UL) / 4UL)); + + /* Move the modulus to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS], in->pMod, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MODULUS + ((in->OpSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ModExpFastMode_Set(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef *in) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_OP_NB_BITS] = PKA_GetBitSize_u8(in->OpSize); + + /* Get the number of bit of the exponent */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXP_NB_BITS] = PKA_GetBitSize_u8(in->expSize); + + /* Move the input parameters pOp1 to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE], in->pOp1, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT_BASE + (in->OpSize / 4UL)); + + /* Move the exponent to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT], in->pExp, in->expSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT + (in->expSize / 4UL)); + + /* Move the modulus to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS], in->pMod, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MODULUS + (in->OpSize / 4UL)); + + /* Move the Montgomery parameter to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM], in->pMontgomeryParam, + in->OpSize / 4UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM + (in->OpSize / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ModExpProtectMode_Set(PKA_HandleTypeDef *hpka, PKA_ModExpProtectModeInTypeDef *in) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_OP_NB_BITS] = PKA_GetBitSize_u8(in->OpSize); + + /* Get the number of bit of the exponent */ + hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXP_NB_BITS] = PKA_GetBitSize_u8(in->expSize); + + /* Move the input parameters pOp1 to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE], in->pOp1, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE + (in->OpSize / 4UL)); + + /* Move the exponent to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_PROTECT_IN_EXPONENT], in->pExp, in->expSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_PROTECT_IN_EXPONENT + (in->expSize / 4UL)); + + /* Move the modulus to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_PROTECT_IN_MODULUS], in->pMod, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_PROTECT_IN_MODULUS + (in->OpSize / 4UL)); + + /* Move Phi value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_PROTECT_IN_PHI], in->pPhi, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_PROTECT_IN_PHI + (in->OpSize / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + * @note If the modulus size is bigger than the hash size (with a curve SECP521R1 when using a SHA256 hash + * for example)the hash value should be written at the end of the buffer with zeros padding at beginning. + */ +void PKA_ECDSASign_Set(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in) +{ + /* Get the prime order n length */ + hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_ORDER_NB_BITS] = PKA_GetOptBitSize_u8(in->primeOrderSize, *(in->primeOrder)); + + /* Get the modulus p length */ + hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_MOD_NB_BITS] = PKA_GetOptBitSize_u8(in->modulusSize, *(in->modulus)); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_A_COEFF], in->coef, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters coefficient B to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_B_COEFF], in->coefB, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_MOD_GF], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters integer k to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_K], in->integer, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_K + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters base point G coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_X], in->basePointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters base point G coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y], in->basePointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters hash of message z to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_HASH_E], in->hash, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters private key d to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D], in->privateKey, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters prime order n to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_ORDER_N], in->primeOrder, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECDSAVerif_Set(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in) +{ + /* Get the prime order n length */ + hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_ORDER_NB_BITS] = PKA_GetOptBitSize_u8(in->primeOrderSize, *(in->primeOrder)); + + /* Get the modulus p length */ + hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_MOD_NB_BITS] = PKA_GetOptBitSize_u8(in->modulusSize, *(in->modulus)); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_A_COEFF], in->coef, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_MOD_GF], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters base point G coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_X], in->basePointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters base point G coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y], in->basePointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters public-key curve point Q coordinate xQ to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X], in->pPubKeyCurvePtX, + in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters public-key curve point Q coordinate xQ to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y], in->pPubKeyCurvePtY, + in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters signature part r to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_R], in->RSign, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_SIGNATURE_R + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters signature part s to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_S], in->SSign, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_SIGNATURE_S + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters hash of message z to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_HASH_E], in->hash, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)); + + /* Move the input parameters curve prime order n to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_ORDER_N], in->primeOrder, in->primeOrderSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_RSACRTExp_Set(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in) +{ + /* Get the operand length M */ + hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_MOD_NB_BITS] = PKA_GetBitSize_u8(in->size); + + /* Move the input parameters operand dP to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DP_CRT], in->pOpDp, in->size / 2UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_DP_CRT + (in->size / 8UL)); + + /* Move the input parameters operand dQ to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DQ_CRT], in->pOpDq, in->size / 2UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_DQ_CRT + (in->size / 8UL)); + + /* Move the input parameters operand qinv to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_QINV_CRT], in->pOpQinv, in->size / 2UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_QINV_CRT + (in->size / 8UL)); + + /* Move the input parameters prime p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_P], in->pPrimeP, in->size / 2UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_PRIME_P + (in->size / 8UL)); + + /* Move the input parameters prime q to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_Q], in->pPrimeQ, in->size / 2UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_PRIME_Q + (in->size / 8UL)); + + /* Move the input parameters operand A to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_EXPONENT_BASE], in->popA, in->size); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_EXPONENT_BASE + (in->size / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_PointCheck_Set(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in) +{ + /* Get the modulus length */ + hpka->Instance->RAM[PKA_POINT_CHECK_IN_MOD_NB_BITS] = PKA_GetOptBitSize_u8(in->modulusSize, *(in->modulus)); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_POINT_CHECK_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_A_COEFF], in->coefA, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters coefficient b to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_B_COEFF], in->coefB, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_MOD_GF], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters montgomery param R2 modulus N to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_MONTGOMERY_PARAM], in->pMontgomeryParam, + (in->modulusSize / 4UL)); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_MONTGOMERY_PARAM + ((in->modulusSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECCMul_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in) +{ + /* Get the prime order n length */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS] = PKA_GetOptBitSize_u8(in->scalarMulSize, *(in->primeOrder)); + + /* Get the modulus length */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS] = PKA_GetOptBitSize_u8(in->modulusSize, *(in->modulus)); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF], in->coefA, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters coefficient b to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_B_COEFF], in->coefB, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters scalar multiplier k to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K], in->scalarMul, in->scalarMulSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters curve prime order N to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER], in->primeOrder, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER + ((in->modulusSize + 3UL) / 4UL)); +} +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECCMulEx_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulExInTypeDef *in) +{ + /* Get the prime order n length */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS] = PKA_GetOptBitSize_u8(in->primeOrderSize, *(in->primeOrder)); + + /* Get the modulus length */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS] = PKA_GetOptBitSize_u8(in->modulusSize, *(in->modulus)); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF], in->coefA, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters coefficient b to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_B_COEFF], in->coefB, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters scalar multiplier k to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K], in->scalarMul, in->scalarMulSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters Point P coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + + /* Move the input parameters curve prime order N to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER], in->primeOrder, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER + ((in->modulusSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ModInv_Set(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MODULAR_INV_NB_BITS] = PKA_GetBitSize_u32(in->size); + + /* Move the input parameters operand A to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP1], in->pOp1, in->size); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_INV_IN_OP1 + in->size); + + /* Move the input parameters modulus value n to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP2_MOD], in->pMod, in->size * 4UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_INV_IN_OP2_MOD + in->size); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ModRed_Set(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_OP_LENGTH] = PKA_GetBitSize_u32(in->OpSize); + + /* Get the number of bit per modulus */ + hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_MOD_LENGTH] = PKA_GetBitSize_u8(in->modSize); + + /* Move the input parameters operand A to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_OPERAND], in->pOp1, in->OpSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_REDUC_IN_OPERAND + in->OpSize); + + /* Move the input parameters modulus value n to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_MODULUS], in->pMod, in->modSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_REDUC_IN_MODULUS + ((in->modSize + 3UL) / 4UL)); +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param size Size of the operand + * @param pOp1 Generic pointer to input data + */ +void PKA_MontgomeryParam_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint8_t *pOp1) +{ + uint32_t bytetoskip = 0UL; + uint32_t newSize; + + if (pOp1 != NULL) + { + /* Count the number of zero bytes */ + while ((bytetoskip < size) && (pOp1[bytetoskip] == 0UL)) + { + bytetoskip++; + } + + /* Get new size after skipping zero bytes */ + newSize = size - bytetoskip; + + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS] = PKA_GetOptBitSize_u8(newSize, pOp1[bytetoskip]); + + /* Move the input parameters pOp1 to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_IN_MODULUS], pOp1, size); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MONTGOMERY_PARAM_IN_MODULUS + ((size + 3UL) / 4UL)); + } +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECCDoubleBaseLadder_Set(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderInTypeDef *in) +{ + /* Get the prime order n length */ + hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_PRIME_ORDER_NB_BITS] = PKA_GetBitSize_u8(in->primeOrderSize); + + /* Get the modulus p length */ + hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS] = PKA_GetBitSize_u8(in->modulusSize); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters coefficient |a| to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_A_COEFF], in->coefA, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_A_COEFF + (in->modulusSize / 4UL)); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_MOD_P], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_MOD_P + (in->modulusSize / 4UL)); + + /* Move the input parameters integer k to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER], in->integerK, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER + (in->modulusSize / 4UL)); + + /* Move the input parameters integer m to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER], in->integerM, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER + (in->modulusSize / 4UL)); + + /* Move the input parameters first point coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT1_X], in->basePointX1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT1_X + (in->modulusSize / 4UL)); + + /* Move the input parameters first point coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y], in->basePointY1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y + (in->modulusSize / 4UL)); + + /* Move the input parameters first point coordinate z to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z], in->basePointZ1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z + (in->modulusSize / 4UL)); + + /* Move the input parameters second point coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT2_X], in->basePointX2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT2_X + (in->modulusSize / 4UL)); + + /* Move the input parameters second point coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y], in->basePointY2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y + (in->modulusSize / 4UL)); + + /* Move the input parameters second point coordinate z to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z], in->basePointZ2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z + (in->modulusSize / 4UL)); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param out Output information + * @retval HAL status + */ +void HAL_PKA_ECCDoubleBaseLadder_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCDoubleBaseLadderOutTypeDef *out) +{ + uint32_t size; + + /* Move the result to appropriate location (indicated in out parameter) */ + size = hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS] / 8UL; + if (out != NULL) + { + PKA_Memcpy_u32_to_u8(out->ptX, &hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_OUT_RESULT_X], size); + PKA_Memcpy_u32_to_u8(out->ptY, &hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_OUT_RESULT_Y], size); + } +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECCProjective2Affine_Set(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineInTypeDef *in) +{ + /* Get the modulus p length */ + hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS] = PKA_GetBitSize_u8(in->modulusSize); + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_MOD_P], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_PROJECTIVE_AFF_IN_MOD_P + (in->modulusSize / 4UL)); + + /* Move the input parameters point coordinate x to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_POINT_X], in->basePointX, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_PROJECTIVE_AFF_IN_POINT_X + (in->modulusSize / 4UL)); + + /* Move the input parameters point coordinate y to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y], in->basePointY, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y + (in->modulusSize / 4UL)); + + /* Move the input parameters point coordinate z to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z], in->basePointZ, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z + (in->modulusSize / 4UL)); + + /* Move the input parameters montgomery parameter R2 modulus n to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2], in->pMontgomeryParam, + (in->modulusSize / 4UL)); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2 + (in->modulusSize / 4UL)); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param out Output information + * @retval HAL status + */ +void HAL_PKA_ECCProjective2Affine_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCProjective2AffineOutTypeDef *out) +{ + uint32_t size; + + /* Move the result to appropriate location (indicated in out parameter) */ + size = hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS] / 8UL; + if (out != NULL) + { + PKA_Memcpy_u32_to_u8(out->ptX, &hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_X], size); + PKA_Memcpy_u32_to_u8(out->ptY, &hpka->Instance->RAM[PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_Y], size); + } +} + +/** + * @brief Set input parameters. + * @param hpka PKA handle + * @param in Input information + */ +void PKA_ECCCompleteAddition_Set(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionInTypeDef *in) +{ + /* Get the modulus p length */ + hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS] = PKA_GetBitSize_u8(in->modulusSize); + + /* Get the coefficient a sign */ + hpka->Instance->RAM[PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN] = in->coefSign; + + /* Move the input parameters modulus value p to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_MOD_P], in->modulus, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_MOD_P + (in->modulusSize / 4UL)); + + /* Move the input parameters coefA value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_A_COEFF], in->coefA, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_A_COEFF + (in->modulusSize / 4UL)); + + /* Move the input parameters first point x value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT1_X], in->basePointX1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT1_X + (in->modulusSize / 4UL)); + + /* Move the input parameters first point y value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT1_Y], in->basePointY1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT1_Y + (in->modulusSize / 4UL)); + + /* Move the input parameters first point z value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT1_Z], in->basePointZ1, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT1_Z + (in->modulusSize / 4UL)); + + /* Move the input parameters second point x value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT2_X], in->basePointX2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT2_X + (in->modulusSize / 4UL)); + + /* Move the input parameters second point y value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT2_Y], in->basePointY2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT2_Y + (in->modulusSize / 4UL)); + + /* Move the input parameters second point z value to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_POINT2_Z], in->basePointZ2, in->modulusSize); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_COMPLETE_ADD_IN_POINT2_Z + (in->modulusSize / 4UL)); +} + +/** + * @brief Retrieve operation result. + * @param hpka PKA handle + * @param out Output information + * @retval HAL status + */ +void HAL_PKA_ECCCompleteAddition_GetResult(PKA_HandleTypeDef *hpka, PKA_ECCCompleteAdditionOutTypeDef *out) +{ + uint32_t size; + + /* Move the result to appropriate location (indicated in out parameter) */ + size = (hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS] + 7UL) / 8UL; + if (out != NULL) + { + PKA_Memcpy_u32_to_u8(out->ptX, &hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_OUT_RESULT_X], size); + PKA_Memcpy_u32_to_u8(out->ptY, &hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_OUT_RESULT_Y], size); + PKA_Memcpy_u32_to_u8(out->ptZ, &hpka->Instance->RAM[PKA_ECC_COMPLETE_ADD_OUT_RESULT_Z], size); + } +} +/** + * @brief Generic function to set input parameters. + * @param hpka PKA handle + * @param size Size of the operand + * @param pOp1 Generic pointer to input data + * @param pOp2 Generic pointer to input data + * @param pOp3 Generic pointer to input data + */ +void PKA_ARI_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint32_t *pOp1, const uint32_t *pOp2, + const uint8_t *pOp3) +{ + /* Get the number of bit per operand */ + hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_NB_BITS] = PKA_GetBitSize_u32(size); + + if (pOp1 != NULL) + { + /* Move the input parameters pOp1 to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP1], pOp1, size); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP1 + size); + } + + if (pOp2 != NULL) + { + /* Move the input parameters pOp2 to PKA RAM */ + PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP2], pOp2, size); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP2 + size); + } + + if (pOp3 != NULL) + { + /* Move the input parameters pOp3 to PKA RAM */ + PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP3], pOp3, size * 4UL); + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP3 + size); + } +} +/** + * @brief Handle PKA init Timeout. + * @param hpka PKA handle. + * @param Flag Specifies the PKA flag to check + * @param Status Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef PKA_WaitOnFlagUntilTimeout(PKA_HandleTypeDef *hpka, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while (__HAL_PKA_GET_FLAG(hpka, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Set the state to ready */ + hpka->State = HAL_PKA_STATE_READY; + + /* Set the error code to timeout error */ + hpka->ErrorCode = HAL_PKA_ERROR_TIMEOUT; + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Get the size of output result. + * @param hpka PKA handle + * @param Startindex Specifies the start index of the result in the PKA RAM + * @param Maxsize Specifies the possible max size of the result in words + * @retval size + */ +uint32_t PKA_Result_GetSize(const PKA_HandleTypeDef *hpka, uint32_t Startindex, uint32_t Maxsize) +{ + uint32_t size; + uint32_t current_index = Maxsize - 1UL; + + /* Determinate the last index of the result in the PKA RAM */ + while ((hpka->Instance->RAM[Startindex + current_index] == 0UL) && (current_index != 0UL)) + { + current_index--; + } + /* Get the size in bytes */ + size = (current_index + 1UL) * 4UL; + + return size; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PKA) && defined(HAL_PKA_MODULE_ENABLED) */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pssi.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pssi.c new file mode 100644 index 000000000..4c23e143a --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pssi.c @@ -0,0 +1,1929 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pssi.c + * @author MCD Application Team + * @brief PSSI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Parallel Synchronous Slave Interface (PSSI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PSSI HAL driver can be used as follows: + + (#) Declare a PSSI_HandleTypeDef handle structure, for example: + PSSI_HandleTypeDef hpssi; + + (#) Initialize the PSSI low level resources by implementing the @ref HAL_PSSI_MspInit() API: + (##) Enable the PSSIx interface clock + (##) PSSI pins configuration + (+++) Enable the clock for the PSSI GPIOs + (+++) Configure PSSI pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the PSSIx interrupt priority + (+++) Enable the NVIC PSSI IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare DMA_HandleTypeDef handles structure for the transmit and receive + (+++) Enable the DMAx interface clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx and Rx + (+++) Associate the initialized DMA handle to the hpssi DMA Tx and Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx and Rx + + (#) Configure the Communication Bus Width, Control Signals, Input Polarity and Output Polarity + in the hpssi Init structure. + + (#) Initialize the PSSI registers by calling the @ref HAL_PSSI_Init(), configure also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_PSSI_MspInit(&hpssi) API. + + (#) Configure the PSSI clock as internal or external by calling the @ref HAL_PSSI_ClockConfig(). + + (#) For PSSI IO operations, two operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit an amount of data by byte in blocking mode using @ref HAL_PSSI_Transmit() + (+) Receive an amount of data by byte in blocking mode using @ref HAL_PSSI_Receive() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit an amount of data in non-blocking mode (DMA) using + @ref HAL_PSSI_Transmit_DMA() + (+) At transmission end of transfer, @ref HAL_PSSI_TxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_PSSI_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using + @ref HAL_PSSI_Receive_DMA() + (+) At reception end of transfer, @ref HAL_PSSI_RxCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_PSSI_RxCpltCallback() + (+) In case of transfer Error, @ref HAL_PSSI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer @ref HAL_PSSI_ErrorCallback() + (+) Abort a PSSI process communication with Interrupt using @ref HAL_PSSI_Abort_IT() + (+) End of abort process, @ref HAL_PSSI_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer @ref HAL_PSSI_AbortCpltCallback() + + *** PSSI HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in PSSI HAL driver. + + (+) @ref HAL_PSSI_ENABLE : Enable the PSSI peripheral + (+) @ref HAL_PSSI_DISABLE : Disable the PSSI peripheral + (+) @ref HAL_PSSI_GET_FLAG : Check whether the specified PSSI flag is set or not + (+) @ref HAL_PSSI_CLEAR_FLAG : Clear the specified PSSI pending flag + (+) @ref HAL_PSSI_ENABLE_IT : Enable the specified PSSI interrupt + (+) @ref HAL_PSSI_DISABLE_IT : Disable the specified PSSI interrupt + + *** Callback registration *** + ============================================= + Use Functions @ref HAL_PSSI_RegisterCallback() or @ref HAL_PSSI_RegisterAddrCallback() + to register an interrupt callback. + + Function @ref HAL_PSSI_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : callback for transmission end of transfer. + (+) RxCpltCallback : callback for reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + Use function @ref HAL_PSSI_UnRegisterCallback to reset a callback to the default + weak function. + @ref HAL_PSSI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : callback for transmission end of transfer. + (+) RxCpltCallback : callback for reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + + + By default, after the @ref HAL_PSSI_Init() and when the state is @ref HAL_PSSI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_PSSI_TxCpltCallback(), @ref HAL_PSSI_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_PSSI_Init()/ @ref HAL_PSSI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the @ref HAL_PSSI_Init()/ @ref HAL_PSSI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + Callbacks can be registered/unregistered in @ref HAL_PSSI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_PSSI_STATE_READY or @ref HAL_PSSI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_PSSI_RegisterCallback() before calling @ref HAL_PSSI_DeInit() + or @ref HAL_PSSI_Init() function. + + + [..] + (@) You can refer to the PSSI HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup PSSI PSSI + * @brief PSSI HAL module driver + * @{ + */ + +#ifdef HAL_PSSI_MODULE_ENABLED +#if defined(PSSI) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PSSI_Private_Define PSSI Private Define + * @{ + */ + + + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup PSSI_Private_Functions PSSI Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +#if defined(HAL_DMA_MODULE_ENABLED) +void PSSI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +void PSSI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +void PSSI_DMAError(DMA_HandleTypeDef *hdma); +void PSSI_DMAAbort(DMA_HandleTypeDef *hdma); +#endif /*HAL_DMA_MODULE_ENABLED*/ + +/* Private functions to handle IT transfer */ +static void PSSI_Error(PSSI_HandleTypeDef *hpssi, uint32_t ErrorCode); + + +/* Private functions for PSSI transfer IRQ handler */ + + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PSSI_Exported_Functions PSSI Exported Functions + * @{ + */ + +/** @defgroup PSSI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the PSSIx peripheral: + + (+) User must implement HAL_PSSI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_PSSI_Init() to configure the selected device with + the selected configuration: + (++) Data Width + (++) Control Signals + (++) Input Clock polarity + (++) Output Clock polarity + + (+) Call the function HAL_PSSI_DeInit() to restore the default configuration + of the selected PSSIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PSSI according to the specified parameters + * in the PSSI_InitTypeDef and initialize the associated handle. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Init(PSSI_HandleTypeDef *hpssi) +{ + /* Check the PSSI handle allocation */ + if (hpssi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PSSI_ALL_INSTANCE(hpssi->Instance)); + assert_param(IS_PSSI_CONTROL_SIGNAL(hpssi->Init.ControlSignal)); + assert_param(IS_PSSI_BUSWIDTH(hpssi->Init.BusWidth)); + assert_param(IS_PSSI_CLOCK_POLARITY(hpssi->Init.ClockPolarity)); + assert_param(IS_PSSI_DE_POLARITY(hpssi->Init.DataEnablePolarity)); + assert_param(IS_PSSI_RDY_POLARITY(hpssi->Init.ReadyPolarity)); + + if (hpssi->State == HAL_PSSI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpssi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + /* Init the PSSI Callback settings */ + hpssi->TxCpltCallback = HAL_PSSI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hpssi->RxCpltCallback = HAL_PSSI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hpssi->ErrorCallback = HAL_PSSI_ErrorCallback; /* Legacy weak ErrorCallback */ + hpssi->AbortCpltCallback = HAL_PSSI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hpssi->MspInitCallback == NULL) + { + hpssi->MspInitCallback = HAL_PSSI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hpssi->MspInitCallback(hpssi); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_PSSI_MspInit(hpssi); +#endif /*USE_HAL_PSSI_REGISTER_CALLBACKS*/ + } + + hpssi->State = HAL_PSSI_STATE_BUSY; + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + + /*---------------------------- PSSIx CR Configuration ----------------------*/ + /* Configure PSSIx: Control Signal and Bus Width*/ + + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DERDYCFG | PSSI_CR_EDM | PSSI_CR_DEPOL | PSSI_CR_RDYPOL, + hpssi->Init.ControlSignal | hpssi->Init.DataEnablePolarity | + hpssi->Init.ReadyPolarity | hpssi->Init.BusWidth); + + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + hpssi->State = HAL_PSSI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the PSSI peripheral. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_DeInit(PSSI_HandleTypeDef *hpssi) +{ + /* Check the PSSI handle allocation */ + if (hpssi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PSSI_ALL_INSTANCE(hpssi->Instance)); + + hpssi->State = HAL_PSSI_STATE_BUSY; + + /* Disable the PSSI Peripheral Clock */ + HAL_PSSI_DISABLE(hpssi); + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + if (hpssi->MspDeInitCallback == NULL) + { + hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hpssi->MspDeInitCallback(hpssi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_PSSI_MspDeInit(hpssi); +#endif /*USE_HAL_PSSI_REGISTER_CALLBACKS*/ + + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + hpssi->State = HAL_PSSI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hpssi); + + return HAL_OK; +} + +/** + * @brief Initialize the PSSI MSP. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_MspInit(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PSSI_MspInit can be implemented in the user file + */ +} + +/** + * @brief De-Initialize the PSSI MSP. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_MspDeInit(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PSSI_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User PSSI Callback + * To be used instead of the weak predefined callback + * @note The HAL_PSSI_RegisterCallback() may be called before HAL_PSSI_Init() in + * HAL_PSSI_STATE_RESET to register callbacks for HAL_PSSI_MSPINIT_CB_ID + * and HAL_PSSI_MSPDEINIT_CB_ID. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PSSI_TX_COMPLETE_CB_ID Tx Transfer completed callback ID + * @arg @ref HAL_PSSI_RX_COMPLETE_CB_ID Rx Transfer completed callback ID + * @arg @ref HAL_PSSI_ERROR_CB_ID Error callback ID + * @arg @ref HAL_PSSI_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_PSSI_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_PSSI_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, + pPSSI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_PSSI_STATE_READY == hpssi->State) + { + switch (CallbackID) + { + case HAL_PSSI_TX_COMPLETE_CB_ID : + hpssi->TxCpltCallback = pCallback; + break; + + case HAL_PSSI_RX_COMPLETE_CB_ID : + hpssi->RxCpltCallback = pCallback; + break; + + case HAL_PSSI_ERROR_CB_ID : + hpssi->ErrorCallback = pCallback; + break; + + case HAL_PSSI_ABORT_CB_ID : + hpssi->AbortCpltCallback = pCallback; + break; + + case HAL_PSSI_MSPINIT_CB_ID : + hpssi->MspInitCallback = pCallback; + break; + + case HAL_PSSI_MSPDEINIT_CB_ID : + hpssi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_PSSI_STATE_RESET == hpssi->State) + { + switch (CallbackID) + { + case HAL_PSSI_MSPINIT_CB_ID : + hpssi->MspInitCallback = pCallback; + break; + + case HAL_PSSI_MSPDEINIT_CB_ID : + hpssi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an PSSI Callback + * PSSI callback is redirected to the weak predefined callback + * @note The HAL_PSSI_UnRegisterCallback() may be called before HAL_PSSI_Init() in + * HAL_PSSI_STATE_RESET to un-register callbacks for HAL_PSSI_MSPINIT_CB_ID + * and HAL_PSSI_MSPDEINIT_CB_ID. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PSSI_TX_COMPLETE_CB_ID Tx Transfer completed callback ID + * @arg @ref HAL_PSSI_RX_COMPLETE_CB_ID Rx Transfer completed callback ID + * @arg @ref HAL_PSSI_ERROR_CB_ID Error callback ID + * @arg @ref HAL_PSSI_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_PSSI_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_PSSI_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_UnRegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_PSSI_STATE_READY == hpssi->State) + { + switch (CallbackID) + { + case HAL_PSSI_TX_COMPLETE_CB_ID : + hpssi->TxCpltCallback = HAL_PSSI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_PSSI_RX_COMPLETE_CB_ID : + hpssi->RxCpltCallback = HAL_PSSI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_PSSI_ERROR_CB_ID : + hpssi->ErrorCallback = HAL_PSSI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_PSSI_ABORT_CB_ID : + hpssi->AbortCpltCallback = HAL_PSSI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_PSSI_MSPINIT_CB_ID : + hpssi->MspInitCallback = HAL_PSSI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_PSSI_MSPDEINIT_CB_ID : + hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_PSSI_STATE_RESET == hpssi->State) + { + switch (CallbackID) + { + case HAL_PSSI_MSPINIT_CB_ID : + hpssi->MspInitCallback = HAL_PSSI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_PSSI_MSPDEINIT_CB_ID : + hpssi->MspDeInitCallback = HAL_PSSI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PSSI_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PSSI data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using DMA. + These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated the DMA IRQ . + + (#) Blocking mode functions are : + (++) HAL_PSSI_Transmit() + (++) HAL_PSSI_Receive() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_PSSI_Transmit_DMA() + (++) HAL_PSSI_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_PSSI_TxCpltCallback() + (++) HAL_PSSI_RxCpltCallback() + (++) HAL_PSSI_ErrorCallback() + (++) HAL_PSSI_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent (in bytes) + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Transmit(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t transfer_size = Size; + + if (((hpssi->Init.DataWidth == HAL_PSSI_8BITS) && (hpssi->Init.BusWidth != HAL_PSSI_8LINES)) || + ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size % 2U) != 0U)) || + ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size % 4U) != 0U))) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + if (hpssi->State == HAL_PSSI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hpssi); + + hpssi->State = HAL_PSSI_STATE_BUSY; + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + + /* Configure transfer parameters */ + MODIFY_REG(hpssi->Instance->CR, (PSSI_CR_OUTEN | PSSI_CR_CKPOL), + (PSSI_CR_OUTEN_OUTPUT | ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL))); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* DMA Disable */ + hpssi->Instance->CR &= PSSI_CR_DMA_DISABLE; +#endif /*HAL_DMA_MODULE_ENABLED*/ + + /* Enable the selected PSSI peripheral */ + HAL_PSSI_ENABLE(hpssi); + + if (hpssi->Init.DataWidth == HAL_PSSI_8BITS) + { + uint8_t *pbuffer = pData; + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to transfer one byte flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT1B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + /* Write data to DR */ + *(__IO uint8_t *)(&hpssi->Instance->DR) = *(uint8_t *)pbuffer; + + /* Increment Buffer pointer */ + pbuffer++; + + transfer_size--; + } + } + else if (hpssi->Init.DataWidth == HAL_PSSI_16BITS) + { + uint16_t *pbuffer = (uint16_t *)pData; + __IO uint16_t *dr = (__IO uint16_t *)(&hpssi->Instance->DR); + + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to transfer four bytes flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + /* Write data to DR */ + *dr = *pbuffer; + + /* Increment Buffer pointer */ + pbuffer++; + transfer_size -= 2U; + } + } + else if (hpssi->Init.DataWidth == HAL_PSSI_32BITS) + { + uint32_t *pbuffer = (uint32_t *)pData; + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to transfer four bytes flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + /* Write data to DR */ + *(__IO uint32_t *)(&hpssi->Instance->DR) = *pbuffer; + + /* Increment Buffer pointer */ + pbuffer++; + transfer_size -= 4U; + } + } + else + { + hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + + /* Check Errors Flags */ + if (HAL_PSSI_GET_FLAG(hpssi, PSSI_FLAG_OVR_RIS) != 0U) + { + HAL_PSSI_CLEAR_FLAG(hpssi, PSSI_FLAG_OVR_RIS); + HAL_PSSI_DISABLE(hpssi); + hpssi->ErrorCode = HAL_PSSI_ERROR_UNDER_RUN; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data in blocking mode. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received (in bytes) + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Receive(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t transfer_size = Size; + + if (((hpssi->Init.DataWidth == HAL_PSSI_8BITS) && (hpssi->Init.BusWidth != HAL_PSSI_8LINES)) || + ((hpssi->Init.DataWidth == HAL_PSSI_16BITS) && ((Size % 2U) != 0U)) || + ((hpssi->Init.DataWidth == HAL_PSSI_32BITS) && ((Size % 4U) != 0U))) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + if (hpssi->State == HAL_PSSI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hpssi); + + hpssi->State = HAL_PSSI_STATE_BUSY; + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + /* Configure transfer parameters */ + MODIFY_REG(hpssi->Instance->CR, (PSSI_CR_OUTEN | PSSI_CR_CKPOL), + (PSSI_CR_OUTEN_INPUT | ((hpssi->Init.ClockPolarity == HAL_PSSI_FALLING_EDGE) ? 0U : PSSI_CR_CKPOL))); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* DMA Disable */ + hpssi->Instance->CR &= PSSI_CR_DMA_DISABLE; +#endif /*HAL_DMA_MODULE_ENABLED*/ + + /* Enable the selected PSSI peripheral */ + HAL_PSSI_ENABLE(hpssi); + if (hpssi->Init.DataWidth == HAL_PSSI_8BITS) + { + uint8_t *pbuffer = pData; + + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to receive one byte flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT1B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + /* Read data from DR */ + *pbuffer = *(__IO uint8_t *)(&hpssi->Instance->DR); + pbuffer++; + transfer_size--; + } + } + else if (hpssi->Init.DataWidth == HAL_PSSI_16BITS) + { + uint16_t *pbuffer = (uint16_t *)pData; + __IO uint16_t *dr = (__IO uint16_t *)(&hpssi->Instance->DR); + + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to receive four bytes flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + + /* Read data from DR */ + *pbuffer = *dr; + pbuffer++; + transfer_size -= 2U; + } + } + else if (hpssi->Init.DataWidth == HAL_PSSI_32BITS) + { + uint32_t *pbuffer = (uint32_t *)pData; + + while (transfer_size > 0U) + { + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + /* Wait until Fifo is ready to receive four bytes flag is set */ + if (PSSI_WaitOnStatusUntilTimeout(hpssi, PSSI_FLAG_RTT4B, RESET, Timeout, tickstart) != HAL_OK) + { + hpssi->ErrorCode = HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + + /* Read data from DR */ + *pbuffer = *(__IO uint32_t *)(&hpssi->Instance->DR); + pbuffer++; + transfer_size -= 4U; + } + } + else + { + hpssi->ErrorCode = HAL_PSSI_ERROR_NOT_SUPPORTED; + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + /* Check Errors Flags */ + + if (HAL_PSSI_GET_FLAG(hpssi, PSSI_FLAG_OVR_RIS) != 0U) + { + HAL_PSSI_CLEAR_FLAG(hpssi, PSSI_FLAG_OVR_RIS); + hpssi->ErrorCode = HAL_PSSI_ERROR_OVER_RUN; + __HAL_UNLOCK(hpssi); + return HAL_ERROR; + } + + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent (in bytes) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Transmit_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hpssi->State == HAL_PSSI_STATE_READY) + { + + /* Process Locked */ + __HAL_LOCK(hpssi); + + hpssi->State = HAL_PSSI_STATE_BUSY_TX; + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + + /* Prepare transfer parameters */ + hpssi->pBuffPtr = pData; + hpssi->XferCount = Size; + + if (hpssi->XferCount > PSSI_MAX_NBYTE_SIZE) + { + hpssi->XferSize = PSSI_MAX_NBYTE_SIZE; + } + else + { + hpssi->XferSize = hpssi->XferCount; + } + + if (hpssi->XferSize > 0U) + { + if (hpssi->hdmatx != NULL) + { + + /* Configure BusWidth */ + if (hpssi->hdmatx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_BYTE) + { + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL, + PSSI_CR_DMA_ENABLE | PSSI_CR_OUTEN_OUTPUT | + ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL)); + } + else + { + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL, + PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth | PSSI_CR_OUTEN_OUTPUT | + ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? 0U : PSSI_CR_CKPOL)); + } + + /* Set the PSSI DMA transfer complete callback */ + hpssi->hdmatx->XferCpltCallback = PSSI_DMATransmitCplt; + + /* Set the DMA error callback */ + hpssi->hdmatx->XferErrorCallback = PSSI_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hpssi->hdmatx->XferHalfCpltCallback = NULL; + hpssi->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA */ + if ((hpssi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hpssi->hdmatx->LinkedListQueue != NULL) + { + /* Enable the DMA channel */ + /* Set DMA data size */ + hpssi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hpssi->XferSize; + /* Set DMA source address */ + hpssi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + /* Set DMA destination address */ + hpssi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&hpssi->Instance->DR; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hpssi->hdmatx); + } + else + { + /* Return error status */ + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmatx, (uint32_t)pData, (uint32_t)&hpssi->Instance->DR, + hpssi->XferSize); + } + } + else + { + /* Update PSSI state */ + hpssi->State = HAL_PSSI_STATE_READY; + + /* Update PSSI error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hpssi->XferCount -= hpssi->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Note : The PSSI interrupts must be enabled after unlocking current process + to avoid the risk of PSSI interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + HAL_PSSI_ENABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Enable DMA Request */ + hpssi->Instance->CR |= PSSI_CR_DMA_ENABLE; + /* Enable the selected PSSI peripheral */ + HAL_PSSI_ENABLE(hpssi); + } + else + { + /* Update PSSI state */ + hpssi->State = HAL_PSSI_STATE_READY; + + /* Update PSSI error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_ERROR; + } + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Note : The PSSI interrupts must be enabled after unlocking current process + to avoid the risk of PSSI interrupt handle execution before current + process unlock */ + /* Enable ERRinterrupt */ + /* possible to enable all of these */ + + HAL_PSSI_ENABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received (in bytes) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Receive_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size) +{ + + HAL_StatusTypeDef dmaxferstatus; + + if (hpssi->State == HAL_PSSI_STATE_READY) + { + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + /* Process Locked */ + __HAL_LOCK(hpssi); + + hpssi->State = HAL_PSSI_STATE_BUSY_RX; + hpssi->ErrorCode = HAL_PSSI_ERROR_NONE; + + /* Prepare transfer parameters */ + hpssi->pBuffPtr = pData; + hpssi->XferCount = Size; + + if (hpssi->XferCount > PSSI_MAX_NBYTE_SIZE) + { + hpssi->XferSize = PSSI_MAX_NBYTE_SIZE; + } + else + { + hpssi->XferSize = hpssi->XferCount; + } + + if (hpssi->XferSize > 0U) + { + if (hpssi->hdmarx != NULL) + { + /* Configure BusWidth */ + if (hpssi->hdmarx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_BYTE) + { + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL, PSSI_CR_DMA_ENABLE | + ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? PSSI_CR_CKPOL : 0U)); + } + else + { + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_DMAEN | PSSI_CR_OUTEN | PSSI_CR_CKPOL, + PSSI_CR_DMA_ENABLE | hpssi->Init.BusWidth | + ((hpssi->Init.ClockPolarity == HAL_PSSI_RISING_EDGE) ? PSSI_CR_CKPOL : 0U)); + } + + /* Set the PSSI DMA transfer complete callback */ + hpssi->hdmarx->XferCpltCallback = PSSI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hpssi->hdmarx->XferErrorCallback = PSSI_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hpssi->hdmarx->XferHalfCpltCallback = NULL; + hpssi->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA */ + if ((hpssi->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hpssi->hdmarx->LinkedListQueue != NULL) + { + /* Enable the DMA channel */ + /* Set DMA data size */ + hpssi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hpssi->XferSize; + /* Set DMA source address */ + hpssi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&hpssi->Instance->DR; + /* Set DMA destination address */ + hpssi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + dmaxferstatus = HAL_DMAEx_List_Start_IT(hpssi->hdmarx); + } + else + { + /* Return error status */ + return HAL_ERROR; + } + } + else + { + dmaxferstatus = HAL_DMA_Start_IT(hpssi->hdmarx, (uint32_t)&hpssi->Instance->DR, (uint32_t)pData, + hpssi->XferSize); + } + } + else + { + /* Update PSSI state */ + hpssi->State = HAL_PSSI_STATE_READY; + + /* Update PSSI error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hpssi->XferCount -= hpssi->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Note : The PSSI interrupts must be enabled after unlocking current process + to avoid the risk of PSSI interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + HAL_PSSI_ENABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Enable DMA Request */ + hpssi->Instance->CR |= PSSI_CR_DMA_ENABLE; + /* Enable the selected PSSI peripheral */ + HAL_PSSI_ENABLE(hpssi); + } + else + { + /* Update PSSI state */ + hpssi->State = HAL_PSSI_STATE_READY; + + /* Update PSSI error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_ERROR; + } + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Enable ERR,interrupt */ + HAL_PSSI_ENABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a DMA process communication with Interrupt. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_Abort_DMA(PSSI_HandleTypeDef *hpssi) +{ + /* Process Locked */ + __HAL_LOCK(hpssi); + + /* Disable Interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Set State at HAL_PSSI_STATE_ABORT */ + hpssi->State = HAL_PSSI_STATE_ABORT; + + /* Abort DMA TX transfer if any */ + if ((hpssi->Instance->CR & PSSI_CR_DMAEN) == PSSI_CR_DMAEN) + { + if (hpssi->State == HAL_PSSI_STATE_BUSY_TX) + { + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmatx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmatx->XferAbortCallback = PSSI_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hpssi->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hpssi->hdmatx->XferAbortCallback(hpssi->hdmatx); + } + } + } + /* Abort DMA RX transfer if any */ + else if (hpssi->State == HAL_PSSI_STATE_BUSY_RX) + { + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmarx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmarx->XferAbortCallback = PSSI_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hpssi->hdmarx) != HAL_OK) + { + /* Call Directly hpssi->hdma->XferAbortCallback function in case of error */ + hpssi->hdmarx->XferAbortCallback(hpssi->hdmarx); + } + } + } + else + { + + /* Call the error callback */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Note : The PSSI interrupts must be enabled after unlocking current process + to avoid the risk of PSSI interrupt handle execution before current + process unlock */ + HAL_PSSI_ENABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + return HAL_OK; +} +#endif /*HAL_DMA_MODULE_ENABLED*/ + +/** + * @} + */ + +/** @addtogroup PSSI_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles PSSI event interrupt request. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi) +{ + /* Overrun/ Underrun Errors */ + if (HAL_PSSI_GET_FLAG(hpssi, PSSI_FLAG_OVR_MIS) != 0U) + { + /* Reset handle parameters */ + hpssi->XferCount = 0U; + + /* Disable all interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA TX transfer if any */ + if ((hpssi->Instance->CR & PSSI_CR_DMAEN) == PSSI_CR_DMAEN) + { + if (hpssi->State == HAL_PSSI_STATE_BUSY_TX) + { + /* Set new error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_UNDER_RUN; + + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmatx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmatx->XferAbortCallback = PSSI_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hpssi->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hpssi->hdmatx->XferAbortCallback(hpssi->hdmatx); + } + } + } + /* Abort DMA RX transfer if any */ + else if (hpssi->State == HAL_PSSI_STATE_BUSY_RX) + { + /* Set new error code */ + hpssi->ErrorCode |= HAL_PSSI_ERROR_OVER_RUN; + + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmarx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmarx->XferAbortCallback = PSSI_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hpssi->hdmarx) != HAL_OK) + { + /* Call Directly hpssi->hdma->XferAbortCallback function in case of error */ + hpssi->hdmarx->XferAbortCallback(hpssi->hdmarx); + } + } + } + else + { +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + /* Call the corresponding callback to inform upper layer of the error */ + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + } +#endif /*HAL_DMA_MODULE_ENABLED*/ + + /* If state is an abort treatment on going, don't change state */ + if (hpssi->State == HAL_PSSI_STATE_ABORT) + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + /* Call the corresponding callback to inform upper layer of End of Transfer */ + hpssi->AbortCpltCallback(hpssi); +#else + HAL_PSSI_AbortCpltCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + else + { + /* Set HAL_PSSI_STATE_READY */ + hpssi->State = HAL_PSSI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + /* Call the corresponding callback to inform upper layer of End of Transfer */ + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Tx Transfer complete callback. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PSSI_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer complete callback. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PSSI_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief PSSI error callback. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PSSI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief PSSI abort callback. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval None + */ +__weak void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpssi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PSSI_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PSSI_Exported_Functions_Group3 Peripheral State and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PSSI handle state. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval HAL state + */ +HAL_PSSI_StateTypeDef HAL_PSSI_GetState(const PSSI_HandleTypeDef *hpssi) +{ + /* Return PSSI handle state */ + return hpssi->State; +} + +/** + * @brief Return the PSSI error code. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @retval PSSI Error Code + */ +uint32_t HAL_PSSI_GetError(const PSSI_HandleTypeDef *hpssi) +{ + return hpssi->ErrorCode; +} + +/** + * @} + */ + +/** @defgroup PSSI_Exported_Functions_Group4 Clock Source Selection function + * @brief Clock Source Selection function to pick between an internal or + * external clock. + * +@verbatim + =============================================================================== + ##### Clock Source Selection function ##### + =============================================================================== + [..] This subsection provides a function allowing to: + (+) Configure Clock source + (++) The clock source could be external (default) or internal (the clock + is generated by the device RCC). + (++) The AHB clock frequency must be at least 2.5 times higher than the + PSSI_PDCK frequency + +@endverbatim + * @{ + */ + +/** + * @brief Configure PSSI Clock Source. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI peripheral. + * @param ClockSource New Clock Configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PSSI_ClockConfig(PSSI_HandleTypeDef *hpssi, uint32_t ClockSource) +{ + /* Check the parameter */ + assert_param(IS_PSSI_CLOCK_SOURCE(ClockSource)); + + if (hpssi->State == HAL_PSSI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hpssi); + + HAL_PSSI_DISABLE(hpssi); + + /* Set CKSRC to ClockSource */ + MODIFY_REG(hpssi->Instance->CR, PSSI_CR_CKSRC, ClockSource); + + HAL_PSSI_ENABLE(hpssi); + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup PSSI_Private_Functions + * @{ + */ + +/** + * @brief PSSI Errors process. + * @param hpssi PSSI handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void PSSI_Error(PSSI_HandleTypeDef *hpssi, uint32_t ErrorCode) +{ + /* Reset handle parameters */ + hpssi->XferCount = 0U; + + /* Set new error code */ + hpssi->ErrorCode |= ErrorCode; + + /* Disable all interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA TX transfer if any */ + if ((hpssi->Instance->CR & PSSI_CR_DMAEN) == PSSI_CR_DMAEN) + { + if (hpssi->State == HAL_PSSI_STATE_BUSY_TX) + { + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmatx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmatx->XferAbortCallback = PSSI_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hpssi->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hpssi->hdmatx->XferAbortCallback(hpssi->hdmatx); + } + } + } + /* Abort DMA RX transfer if any */ + else if (hpssi->State == HAL_PSSI_STATE_BUSY_RX) + { + hpssi->Instance->CR &= ~PSSI_CR_DMAEN; + + if (hpssi->hdmarx != NULL) + { + /* Set the PSSI DMA Abort callback : + will lead to call HAL_PSSI_ErrorCallback() at end of DMA abort procedure */ + hpssi->hdmarx->XferAbortCallback = PSSI_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hpssi->hdmarx) != HAL_OK) + { + /* Call Directly hpssi->hdma->XferAbortCallback function in case of error */ + hpssi->hdmarx->XferAbortCallback(hpssi->hdmarx); + } + } + } + else + { + /*Nothing to do*/ + } + } +#endif /*HAL_DMA_MODULE_ENABLED*/ + + /* If state is an abort treatment on going, don't change state */ + if (hpssi->State == HAL_PSSI_STATE_ABORT) + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->AbortCpltCallback(hpssi); +#else + HAL_PSSI_AbortCpltCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + else + { + /* Set HAL_PSSI_STATE_READY */ + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA PSSI slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +void PSSI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + uint32_t tmperror; + + /* Disable Interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Store current volatile hpssi->ErrorCode, misra rule */ + tmperror = hpssi->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hpssi->State == HAL_PSSI_STATE_ABORT) || (tmperror != HAL_PSSI_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + PSSI_Error(hpssi, hpssi->ErrorCode); + } + /* hpssi->State == HAL_PSSI_STATE_BUSY_TX */ + else + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->TxCpltCallback(hpssi); +#else + HAL_PSSI_TxCpltCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA PSSI master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +void PSSI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + uint32_t tmperror; + + /* Disable Interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Store current volatile hpssi->ErrorCode, misra rule */ + tmperror = hpssi->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hpssi->State == HAL_PSSI_STATE_ABORT) || (tmperror != HAL_PSSI_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + PSSI_Error(hpssi, hpssi->ErrorCode); + } + /* hpssi->State == HAL_PSSI_STATE_BUSY_RX */ + else + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->RxCpltCallback(hpssi); +#else + HAL_PSSI_RxCpltCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA PSSI communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +void PSSI_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + hpssi->hdmatx->XferAbortCallback = NULL; + hpssi->hdmarx->XferAbortCallback = NULL; + + /* Check if come from abort from user */ + if (hpssi->State == HAL_PSSI_STATE_ABORT) + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->AbortCpltCallback(hpssi); +#else + HAL_PSSI_AbortCpltCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } + else + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } +} +#endif /*HAL_DMA_MODULE_ENABLED*/ + +/** + * @brief This function handles PSSI Communication Timeout. + * @param hpssi Pointer to a PSSI_HandleTypeDef structure that contains + * the configuration information for the specified PSSI. + * @param Flag Specifies the PSSI flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef PSSI_WaitOnStatusUntilTimeout(PSSI_HandleTypeDef *hpssi, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while ((HAL_PSSI_GET_STATUS(hpssi, Flag) & Flag) == (uint32_t)Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hpssi->ErrorCode |= HAL_PSSI_ERROR_TIMEOUT; + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +void PSSI_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + PSSI_HandleTypeDef *hpssi = (PSSI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + uint32_t tmperror; + + /* Disable the selected PSSI peripheral */ + HAL_PSSI_DISABLE(hpssi); + + /* Disable Interrupts */ + HAL_PSSI_DISABLE_IT(hpssi, PSSI_FLAG_OVR_RIS); + + /* Store current volatile hpssi->ErrorCode, misra rule */ + tmperror = hpssi->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hpssi->State == HAL_PSSI_STATE_ABORT) || (tmperror != HAL_PSSI_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + PSSI_Error(hpssi, hpssi->ErrorCode); + } + else + { + hpssi->State = HAL_PSSI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hpssi); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_PSSI_REGISTER_CALLBACKS == 1) + hpssi->ErrorCallback(hpssi); +#else + HAL_PSSI_ErrorCallback(hpssi); +#endif /* USE_HAL_PSSI_REGISTER_CALLBACKS */ + } +} +#endif /*HAL_DMA_MODULE_ENABLED*/ + + +/** + * @} + */ +#endif /* PSSI */ +#endif /* HAL_PSSI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr.c new file mode 100644 index 000000000..5c1c37c6c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr.c @@ -0,0 +1,692 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/De-Initialization Functions. + * + Peripheral Control Functions. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### PWR peripheral overview ##### + ============================================================================== + [..] + (#) The Power control (PWR) provides an overview of the supply architecture + for the different power domains and of the supply configuration + controller. + + (#) Several low-power modes are available to save power when the CPU does not need to + execute code : + (+) Sleep (CPU clock stopped and still in RUN mode) + (+) Stop (System clock stopped) + (+) Standby (System powered down) + + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Call HAL_PWR_EnableBkUpAccess() and HAL_PWR_DisableBkUpAccess() functions + to enable/disable access to the backup domain (RCC Backup domain control + register RCC_BDCR, RTC registers, TAMP registers, backup registers and + backup SRAM). + + (#) Call HAL_PWR_ConfigPVD() after setting parameters to be configured (event + mode and voltage threshold) in order to set up the Programmed Voltage + Detector, then use HAL_PWR_EnablePVD() and HAL_PWR_DisablePVD() + functions to start and stop the PVD detection. + (+) PVD level can be one of the following values : + (++) 2V0 + (++) 2V2 + (++) 2V4 + (++) 2V5 + (++) 2V6 + (++) 2V8 + (++) 2V9 + (++) External input analog voltage PVD_IN (compared internally to + VREFINT) + + (#) Call HAL_PWR_EnableWakeUpPin() and HAL_PWR_DisableWakeUpPin() functions + with the right parameter to configure the wake up pin polarity (Low or + High), the wake up pin selection and to enable and disable it. + + (#) Call HAL_PWR_EnterSLEEPMode() function to enter the CPU in Sleep mode. + Wake-up from Sleep mode could be following to an event or an + interrupt according to low power mode intrinsic request called (__WFI() + or __WFE()). + + (#) Call HAL_PWR_EnterSTOPMode() function to enter the whole system to Stop + mode. Wake-up from Stop mode could be following to an event or an + interrupt according to low power mode intrinsic request called (__WFI() + or __WFE()). + + (#) Call HAL_PWR_EnterSTANDBYMode() function to enter the whole system in + Standby mode. Wake-up from Standby mode can be following only by an + interrupt. + + (#) Call HAL_PWR_EnableSleepOnExit() and HAL_PWR_DisableSleepOnExit() APIs to + enable and disable the Cortex-M7 re-entry in Sleep mode after an + interruption handling is over. + + (#) Call HAL_PWR_EnableSEVOnPend() and HAL_PWR_DisableSEVOnPend() functions + to configure the Cortex-M7 to wake-up after any pending event / interrupt + even if it's disabled or has insufficient priority to cause exception + entry. + + *** PWR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in PWR HAL driver. + + (+) __HAL_PWR_GET_FLAG() : Get the PWR pending flags. + (+) __HAL_PWR_CLEAR_FLAG() : Clear the PWR pending flags. + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT (0x00010000U) +#define PVD_MODE_EVT (0x00020000U) +#define PVD_RISING_EDGE (0x00000001U) +#define PVD_FALLING_EDGE (0x00000002U) +#define PVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @brief Initialization and de-Initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and De-Initialization Functions ##### + =============================================================================== + [..] + This section provides functions allowing to deinitialize power peripheral. + + [..] + After system reset, the backup domain (RCC Backup domain control register + RCC_BDCR, RTC registers, TAMP registers, backup registers and backup SRAM) + is protected against possible unwanted write accesses. + The HAL_PWR_EnableBkUpAccess() function enables the access to the backup + domain. + The HAL_PWR_DisableBkUpAccess() function disables the access to the backup + domain. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + * values. + * @note This functionality is not available in this product. + * The prototype is kept just to maintain compatibility with other + * products. + * @retval None. + */ +void HAL_PWR_DeInit(void) +{ +} + +/** + * @brief Enable access to the backup domain (RCC Backup domain control + * register RCC_BDCR, RTC registers, TAMP registers, backup registers + * and backup SRAM). + * @note After a system reset, the backup domain is protected against + * possible unwanted write accesses. + * @retval None. + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain (RCC Backup domain control + * register RCC_BDCR, RTC registers, TAMP registers, backup registers + * and backup SRAM). + * @retval None. + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} +/** + * @} + */ + + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @brief Power Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control Functions ##### + =============================================================================== + [..] + This section provides functions allowing to control power peripheral. + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR1 + register). + + (+) A PVDO flag is available to indicate if VDD is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + + (+) The PVD is stopped in STANDBY mode. + + *** Wake-up pin configuration *** + ================================= + [..] + (+) Wake-up pin is used to wake up the system from STANDBY mode. + The pin pull is configurable through the WKUPEPR register to be in + No-pull, Pull-up and Pull-down. + The pin polarity is configurable through the WKUPEPR register to be + active on rising or falling edges. + + (+) There are up to four Wake-up pin in the STM32H7RS devices family. + + *** Low Power modes configuration *** + ===================================== + [..] + The device present 3 principles low-power modes : + (+) SLEEP mode : Cortex-M7 is stopped and all PWR domains are remaining + active (Powered and Clocked). + + (+) STOP mode : Cortex-M7 is stopped, clocks are stopped and the + regulator is running. The Main regulator or the LP + regulator could be selected. + + (+) STANDBY mode : All PWR domains enter DSTANDBY mode and the VCORE + supply regulator is powered off. + + *** SLEEP mode *** + ================== + [..] + (+) Entry: + The SLEEP mode is entered by using the HAL_PWR_EnterSLEEPMode(Regulator, + SLEEPEntry) function. + + (++) PWR_SLEEPENTRY_WFI : Enter SLEEP mode with WFI instruction. + (++) PWR_SLEEPENTRY_WFE : Enter SLEEP mode with WFE instruction and + clear of pending events before. + (++) PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR: Enter SLEEP mode with WFE instruction and + no clear of pending event before. + -@@- The Regulator parameter is not used for the STM32H7RS family + and is kept as parameter just to maintain compatibility with the + lower power families. (STM32L). + + (+) Exit: + Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from SLEEP mode. + + *** STOP mode *** + ================= + [..] + In system STOP mode, the CPU clock is stopped. All CPU subsystem peripheral + clocks are stopped too. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption in STOP mode, FLASH can be powered off before + entering the STOP mode using the HAL_PWREx_EnableFlashPowerDown() function. + It can be switched on again by software after exiting the STOP mode using + the HAL_PWREx_DisableFlashPowerDown() function. + (+) Entry: + The STOP mode is entered using the HAL_PWR_EnterSTOPMode(Regulator, + STOPEntry) function with: + (++) Regulator: + (+++) PWR_MAINREGULATOR_ON: Main regulator ON. + This parameter is not used for the STM32H7RS family and is kept as parameter + just to maintain compatibility with the lower power families. + (++) STOPEntry: + (+++) PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + (+++) PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction and + clear of pending events before. + (+++) PWR_STOPENTRY_WFE_NO_EVT_CLEAR: Enter STOP mode with WFE instruction and + no clear of pending event before. + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** STANDBY mode *** + ==================== + [..] + (+) + The system STANDBY mode allows to achieve the lowest power consumption. + It is based on the Cortex-M7 deep SLEEP mode, with the voltage regulator + disabled. The system is consequently powered off. The PLL, the HSI + oscillator and the HSE oscillator are also switched off. SRAM and register + contents are lost except for the RTC registers, RTC backup registers, + backup SRAM and standby circuitry. + + [..] + The voltage regulator is OFF. + + (++) Entry: + (+++) The STANDBY mode is entered using the HAL_PWR_EnterSTANDBYMode() + function. + + (++) Exit: + (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), + RTC wakeup, tamper event, time stamp event, external reset in NRST + pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an + RTC Wakeup event, a tamper event or a time-stamp event, without + depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the STOP and STANDBY modes + + (++) To wake up from the STOP mode with an RTC alarm event, it is + necessary to configure the RTC to generate the RTC alarm using the + HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the STOP mode with an RTC Tamper or time stamp event, + it is necessary to configure the RTC to detect the tamper or time + stamp event using the HAL_RTCEx_SetTimeStamp_IT() or + HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the STOP mode with an RTC WakeUp event, it is + necessary to configure the RTC to generate the RTC WakeUp event + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the voltage threshold detected by the Programmed Voltage + * Detector (PVD). + * @param sConfigPVD : Pointer to a PWR_PVDTypeDef structure that contains the + * PVD configuration information (PVDLevel and EventMode). + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note As PVD and AVD share the same EXTI line, the EXTI operating mode to + * configure will replace a possible previous configuration done through + * HAL_PWREx_ConfigAVD. + * @retval None. + */ +void HAL_PWR_ConfigPVD(const PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the PVD configuration parameter */ + if (sConfigPVD == NULL) + { + return; + } + + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + /* Configure the PVD in interrupt mode */ + if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure the PVD in event mode */ + if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Rising edge configuration */ + if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + /* Falling edge configuration */ + if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enable the programmable voltage detector (PVD). + * @retval None. + */ +void HAL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_PVDE); +} + +/** + * @brief Disable the programmable voltage detector (PVD). + * @retval None. + */ +void HAL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity : Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values, which + * sets the default (rising edge): + * @arg PWR_WAKEUP_PIN1, + * PWR_WAKEUP_PIN2, + * PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4. + * or one of the following values where the user can explicitly states + * the enabled pin and the chosen polarity: + * @arg PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW. + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @retval None. + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* + Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge). + */ + MODIFY_REG(PWR->WKUPEPR, PWR_WKUPEPR_WKUPEN | PWR_WKUPEPR_WKUPP, WakeUpPinPolarity); +} + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx : Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1, + * PWR_WAKEUP_PIN2, + * PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4, + * PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW. + * @retval None. + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + /* Disable the wake up pin selected */ + CLEAR_BIT(PWR->WKUPEPR, (PWR_WKUPEPR_WKUPEN & WakeUpPinx)); +} + +/** + * @brief Enter the current core in SLEEP mode (CSLEEP). + * @param Regulator : NA in this family project + * Specifies the regulator state in SLEEP mode. + * @note This parameter is not used for the STM32H7RS family and is kept as + * parameter just to maintain compatibility with the lower power + * families. + * @param SLEEPEntry : Specifies if SLEEP mode is entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI : Enter SLEEP mode with WFI instruction. + * @arg PWR_SLEEPENTRY_WFE : Enter SLEEP mode with WFE instruction and + * clear of pending events before. + * @arg PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR : Enter SLEEP mode with WFE instruction and + * no clear of pending event before. + * @retval None. + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Regulator); + + /* Check the parameters */ + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Select Sleep mode entry */ + if (SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + if (SLEEPEntry != PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR) + { + /* Clear all pending event */ + __SEV(); + __WFE(); + } + + /* Request Wait For Event */ + __WFE(); + } +} + +/** + * @brief Enter the whole system to Stop mode. + * @note This API will enter the system in STOP mode + * @param Regulator : This parameter is not used for this product family. + and is kept as parameter just to maintain compatibility with the + lower power families. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction and + * clear of pending events before. + * @arg PWR_STOPENTRY_WFE_NO_EVT_CLEAR : Enter STOP mode with WFE instruction and + * no clear of pending event before. + * @note In System STOP mode, all I/O pins keep the same state as in Run mode. + * @note When exiting System STOP mode by issuing an interrupt or a wakeup + * event, the HSI RC oscillator is selected as default system wakeup + * clock. + * @note In System STOP mode, when the voltage regulator operates in low + * power mode, an additional startup delay is incurred when the system + * is waking up. By keeping the internal regulator ON during STOP mode, + * the consumption is higher although the startup time is reduced. + * @retval None. + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Regulator); + + /* Check the parameters */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Select Stop mode when device enters Deepsleep */ + CLEAR_BIT(PWR->CSR3, PWR_CSR3_PDDS); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB(); + __ISB(); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + if (STOPEntry != PWR_STOPENTRY_WFE_NO_EVT_CLEAR) + { + /* Clear all pending event */ + __SEV(); + __WFE(); + } + /* Request Wait For Event */ + __WFE(); + } + + /* Clear SLEEPDEEP bit of Cortex-M7 in the System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enter the whole system to Standby mode. + * @note The Standby mode allows achieving the lowest power consumption. + * @note When the system enters in Standby mode, the voltage regulator is disabled. + * The complete VCORE domain is consequently powered off. + * The PLLs, HSI oscillator, CSI oscillator, HSI48 and the HSE oscillator are + * also switched off. + * SRAM and register contents are lost except for backup domain registers + * (RTC registers, RTC backup register and backup RAM), and Standby circuitry. + * @note When the System exit STANDBY mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock. + * @retval None. + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select Standby when device enters Deepsleep */ + SET_BIT(PWR->CSR3, PWR_CSR3_PDDS); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STANDBY mode */ + __DSB(); + __ISB(); + + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Indicate SLEEP-ON-EXIT feature when returning from handler mode to + * thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters Sleep mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run + * only on interruptions handling. + * @retval None. + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex-M7 System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Disable SLEEP-ON-EXIT feature when returning from handler mode to + * thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters Sleep mode when an interruption handling is over. + * @retval None. + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex-M7 System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enable CORTEX SEV-ON-PEND feature. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, any + * pending event / interrupt even if it's disabled or has insufficient + * priority to cause exception entry wakes up the Cortex-M7. + * @retval None. + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex-M7 System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Disable CORTEX SEVONPEND feature. + * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only + * enabled pending causes exception entry wakes up the Cortex-M7. + * @retval None. + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex-M7 System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr_ex.c new file mode 100644 index 000000000..8e2ef435b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_pwr_ex.c @@ -0,0 +1,1601 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of PWR extension peripheral: + * + Peripheral Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Call HAL_PWREx_ConfigSupply() function to configure the regulator supply + with the following different setups according to hardware (support SMPS): + (+) PWR_DIRECT_SMPS_SUPPLY + (+) PWR_SMPS_1V8_SUPPLIES_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT + (+) PWR_LDO_SUPPLY + (+) PWR_EXTERNAL_SOURCE_SUPPLY + + (#) Call HAL_PWREx_GetSupplyConfig() function to get the current supply setup. + + (#) Call HAL_PWREx_ControlVoltageScaling() function to configure the main + internal regulator output voltage. The voltage scaling could be one of + the following scales : + (+) PWR_REGULATOR_VOLTAGE_SCALE0 + (+) PWR_REGULATOR_VOLTAGE_SCALE1 + + (#) Call HAL_PWREx_GetVoltageRange() function to get the current output + voltage applied to the main regulator. + + (#) Call HAL_PWREx_ControlStopModeVoltageScaling() function to configure the main + internal regulator output voltage in STOP mode. The voltage scaling could be one of + the following scales : + (+) PWR_REGULATOR_STOP_VOLTAGE_SCALE3 + (+) PWR_REGULATOR_STOP_VOLTAGE_SCALE5 + + (#) Call HAL_PWREx_GetStopModeVoltageRange() function to get the current output + voltage applied to the main regulator in STOP mode. + + (#) Call HAL_PWREx_EnableFlashPowerDown() and + HAL_PWREx_DisableFlashPowerDown() functions to enable and disable the + Flash Power Down in STOP mode. + + (#) Call HAL_PWREx_EnableWakeUpPin() and HAL_PWREx_DisableWakeUpPin() + functions to enable and disable the Wake-up pin functionality for + the selected pin. + + (#) Call HAL_PWREx_GetWakeupFlag() and HAL_PWREx_ClearWakeupFlag() + functions to manage wake-up flag for the selected pin. + + (#) Call HAL_PWREx_WAKEUP_PIN_IRQHandler() function to handle all wake-up + pins interrupts. + + (#) Call HAL_PWREx_EnableBkUpReg() and HAL_PWREx_DisableBkUpReg() functions + to enable and disable the backup domain regulator. + + (#) Call HAL_PWREx_EnableUSBReg(), HAL_PWREx_DisableUSBReg(), + HAL_PWREx_EnableUSBVoltageDetector() and + HAL_PWREx_DisableUSBVoltageDetector() functions to manage USB power + regulation functionalities. + + (#) Call HAL_PWREx_EnableUCPDStandbyMode() and HAL_PWREx_DisableUCPDStandbyMode() functions + to enable and disable UCPD Standby mode. + + (#) Call HAL_PWREx_EnableUCPDDeadBattery() and HAL_PWREx_DisableUCPDDeadBattery() functions + to enable and disable UCPD dead battery. + + (#) Call HAL_PWREx_EnableBatteryCharging() and + HAL_PWREx_DisableBatteryCharging() functions to enable and disable the + battery charging feature with the selected resistor. + + (#) Call HAL_PWREx_EnableAnalogBooster() and HAL_PWREx_DisableAnalogBooster() functions + to enable and disable the AVD boost feature when the VDD supply voltage is below 2V7. + + (#) Call HAL_PWREx_EnableXSPIM1() and HAL_PWREx_DisableXSPIM1() functions + to enable and disable the XSPIM1. + + (#) Call HAL_PWREx_EnableXSPIM2() and HAL_PWREx_DisableXSPIM2() functions + to enable and disable the XSPIM2. + + (#) Call HAL_PWREx_ConfigXSPIPortCap() functions to configure the XSPI capacitor port 1 and 2. + The capacitor setting could be one of the following values : + (+) PWR_CAPACITOR_OFF + (+) PWR_CAPACITOR_ONE_THIRD_CAPACITANCE + (+) PWR_CAPACITOR_TWO_THIRD_CAPACITANCE + (+) PWR_CAPACITOR_FULL_CAPACITANCE + + (#) Call HAL_PWREx_GetConfigXSPIPortCap() function to get the current + capacitor port setting. + + (#) Call HAL_PWREx_EnableMonitoring() and HAL_PWREx_DisableMonitoring() + functions to enable and disable the VBAT and Temperature monitoring. + When VBAT and Temperature monitoring feature is enables, use + HAL_PWREx_GetTemperatureLevel() and HAL_PWREx_GetVBATLevel() to get + respectively the Temperature level and VBAT level. + + (#) Call HAL_PWREx_ConfigAVD() after setting parameter to be configured + (event mode and voltage threshold) in order to set up the Analog Voltage + Detector then use HAL_PWREx_EnableAVD() and HAL_PWREx_DisableAVD() + functions to start and stop the AVD detection. + (+) AVD level could be one of the following values : + (++) 1V7 + (++) 2V1 + (++) 2V5 + (++) 2V8 + + (#) Call HAL_PWREx_PVD_AVD_IRQHandler() function to handle the PWR PVD and + AVD interrupt request. + + (#) Call HAL_PWREx_EnablePullUpPullDownConfig() and + HAL_PWREx_DisablePullUpPullDownConfig() to I/O enable / disable pull-up + and pull-down configuration. + + (#) Call HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() to + apply respectively pull-up and pull-down to selected I/O. + Call HAL_PWREx_DisableGPIOPullUp() and HAL_PWREx_DisableGPIOPullDown() to + disable applied respectively pull-up and pull-down to selected I/O. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @addtogroup PWREx_Private_Constants + * @{ + */ + +/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask + * @{ + */ +#define AVD_MODE_IT (0x00010000U) +#define AVD_MODE_EVT (0x00020000U) +#define AVD_RISING_EDGE (0x00000001U) +#define AVD_FALLING_EDGE (0x00000002U) +#define AVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value + * @{ + */ +#define PWR_FLAG_SETTING_DELAY (1000U) +/** + * @} + */ + +/** @defgroup PWREx_WakeUp_Pins_Offsets PWREx Wake-Up Pins masks and offsets + * @{ + */ +/* Wake-Up Pins EXTI register mask */ +#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\ + EXTI_IMR2_IM57 | EXTI_IMR2_IM58 ) + +/* Wake-Up Pins PWR Pin Pull shift offsets */ +#define PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @brief Power supply control functions + * +@verbatim + =============================================================================== + ##### Power supply control functions ##### + =============================================================================== + [..] + (#) When the system is powered on, the POR monitors VDD supply. Once VDD is + above the POR threshold level, the SMPS step-down converter and voltage + regulator are enabled in the default supply configuration: + + (+) The SMPS step-down converter output level is set at 1.35 V. + The voltage regulator LDO output level is set at 1.11 V. + Depending on the package and configuration the SMPS provides the + voltage to internal power domain and/or LDO or external supply. + + (+) The system is kept in reset mode as long as VCORE is not stable. + + (+) Once VCORE is stable, the system is taken out of reset and the HSI + oscillator is enabled. + + (+) Once the oscillator is stable, the system is initialized: Flash memory + is ready, option bytes are loaded and the CPU starts in limited run mode. + + (+) The software must then initialize the system including supply + configuration programming in PWR control register 2 (PWR_CSR2). + Once the supply configuration has been configured, the ACTVOSRDY bit in + the PWR control status register 1 (PWR_SR1) must be checked to guarantee + valid voltage levels: + a) As long as ACTVOSRDY indicates that voltage levels are invalid, the + system is in Run mode, write accesses to the RAMs are not permitted and + VOS must not be changed. + b) Once ACTVOSRDY indicates that voltage levels are valid, the system is + in normal Run mode, write accesses to RAMs are allowed and VOS can be + changed. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the system Power Supply. + * @param SupplySource : Specifies the Power Supply source to set after a + * system startup. + * This parameter can be one of the following values : + * @arg PWR_DIRECT_SMPS_SUPPLY : The SMPS supplies the Vcore Power + * Domains. The LDO is Bypassed. + * @arg PWR_SMPS_1V8_SUPPLIES_LDO : The SMPS 1.8V output supplies + * the LDO. The Vcore Power Domains + * are supplied from the LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO : The SMPS 1.8V output + * supplies external + * circuits and the LDO. + * The Vcore Power Domains + * are supplied from the + * LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT : The SMPS 1.8V output supplies + * external circuits. The LDO is + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @arg PWR_LDO_SUPPLY : The LDO regulator supplies the Vcore Power + * Domains. The SMPS regulator is Bypassed. + * @arg PWR_EXTERNAL_SOURCE_SUPPLY : The SMPS is disabled and the LDO are + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @note The SMPS step-down converter is not available on all packages, + * and the Bypass mode is available only when the SMPS is available. + * @note The PWR_DIRECT_SMPS_SUPPLY, PWR_SMPS_1V8_SUPPLIES_LDO, + * PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO and PWR_SMPS_1V8_SUPPLIES_EXT are used + * only for lines that supports SMPS regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply(uint32_t SupplySource) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_PWR_SUPPLY(SupplySource)); + + /* Check if supply source was configured */ + if ((PWR->CSR2 & (PWR_CSR2_SDEN | PWR_CSR2_LDOEN | PWR_CSR2_BYPASS)) != (PWR_CSR2_SDEN | PWR_CSR2_LDOEN)) + { + /* Check supply configuration */ + if ((PWR->CSR2 & PWR_SUPPLY_CONFIG_MASK) != SupplySource) + { + /* Supply configuration update locked, can't apply a new supply config */ + return HAL_ERROR; + } + else + { + /* Supply configuration update locked, but new supply configuration + matches with old supply configuration : nothing to do + */ + return HAL_OK; + } + } + + /* Set the power supply configuration */ + MODIFY_REG(PWR->CSR2, PWR_SUPPLY_CONFIG_MASK, SupplySource); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till voltage level flag is set */ + while ((PWR->SR1 & PWR_SR1_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + /* When the SMPS supplies external circuits verify that SDEXTRDY flag is set */ + if ((SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) || + (SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT)) + { + /* Get the current tick number */ + tickstart = HAL_GetTick(); + + /* Wait till SMPS external supply ready flag is set */ + while ((PWR->CSR2 & PWR_CSR2_SDEXTRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Get the power supply configuration. + * @retval The supply configuration. + */ +uint32_t HAL_PWREx_GetSupplyConfig(void) +{ + return (PWR->CSR2 & PWR_SUPPLY_CONFIG_MASK); +} + +/** + * @brief Configure the main internal regulator output voltage. + * @param VoltageScaling : Specifies the regulator output voltage to achieve + * a tradeoff between performance and power + * consumption. + * This parameter can be one of the following values : + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage scaling range 0 (highest frequency). + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage scaling range 1 (lowest power). + * @note When increasing the performance, the voltage scaling must be changed + * before increasing the system frequency. + * When decreasing performance, the system frequency must first be decreased + * before changing the voltage scaling. + * @note When exiting from Stop mode or Standby mode, the Run mode voltage + * scaling is reset to the default VOS low value. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling)); + + /* Set the voltage range */ + MODIFY_REG(PWR->CSR4, PWR_CSR4_VOS, VoltageScaling); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till voltage level flag is set */ + while ((PWR->CSR4 & PWR_CSR4_VOSRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage. Reflecting the last + * VOS value applied to the PMU. + * @retval The current applied VOS selection. + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + /* Get the active voltage scaling */ + return (PWR->SR1 & PWR_SR1_ACTVOS); +} + +/** + * @brief Configure the main internal regulator output voltage in STOP mode. + * @param VoltageScaling : Specifies the regulator output voltage when the + * system enters Stop mode to achieve a tradeoff between performance + * and power consumption. + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_STOP_VOLTAGE_SCALE3 : System Stop mode voltage scaling range 3 (highest frequency). + * @arg PWR_REGULATOR_STOP_VOLTAGE_SCALE5 : System Stop mode voltage scaling range 5 (lowest power). + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VoltageScaling)); + + /* Return the stop mode voltage range */ + MODIFY_REG(PWR->CR1, PWR_CR1_SVOS, VoltageScaling); + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage in STOP mode. + * @retval The actual applied SVOS selection. + */ +uint32_t HAL_PWREx_GetStopModeVoltageRange(void) +{ + /* Return the stop voltage scaling */ + return (PWR->CR1 & PWR_CR1_SVOS); +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @brief Low Power Control Functions + * +@verbatim + =============================================================================== + ##### Low Power Control Functions ##### + =============================================================================== + + *** FLASH Power Down configuration **** + ======================================= + [..] + By setting the FLPS bit in the PWR_CR1 register using the + HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters + power down mode when the device enters STOP mode. When the Flash memory is + in power down mode, an additional startup delay is incurred when waking up + from STOP mode. + + *** Wakeup Pins configuration **** + =================================== + [..] + Wakeup pins allow the system to exit from Standby mode. The configuration + of wakeup pins is done with the HAL_PWREx_EnableWakeUpPin(sPinParams) + function with: + (+) sPinParams: structure to enable and configure a wakeup pin: + (++) WakeUpPin: Wakeup pin to be enabled. + (++) PinPolarity: Wakeup pin polarity (rising or falling edge). + (++) PinPull: Wakeup pin pull (no pull, pull-up or pull-down). + [..] + The wakeup pins are internally connected to the EXTI lines [55-58] to + generate an interrupt if enabled. The EXTI lines configuration is done by + the HAL_EXTI_Dx_EventInputConfig() functions defined in the stm32h7rsxxhal.c + file. + [..] + When a wakeup pin event is received the HAL_PWREx_WAKEUP_PIN_IRQHandler is + called and the appropriate flag is set in the PWR_WKUPFR register. Then in + the HAL_PWREx_WAKEUP_PIN_IRQHandler function the wakeup pin flag will be + cleared and the appropriate user callback will be called. The user can add + his own code by customization of function pointer HAL_PWREx_WKUPx_Callback. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Flash Power Down in Stop mode. + * @note When Flash Power Down is enabled the Flash memory enters low-power + * mode when device is in Stop mode. This feature allows to + * obtain the best trade-off between low-power consumption and restart + * time when exiting from Stop mode. + * @retval None. + */ +void HAL_PWREx_EnableFlashPowerDown(void) +{ + /* Enable the Flash Power Down */ + SET_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash Power Down in Stop mode. + * @note When Flash Power Down is disabled the Flash memory is kept on + * normal mode when device is in Stop mode. This feature allows + * to obtain the best trade-off between low-power consumption and + * restart time when exiting from Stop mode. + * @retval None. + */ +void HAL_PWREx_DisableFlashPowerDown(void) +{ + /* Disable the Flash Power Down */ + CLEAR_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Enable the Wake-up PINx functionality. + * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that + * contains the configuration information for the wake-up + * Pin. + * @retval None. + */ +void HAL_PWREx_EnableWakeUpPin(const PWREx_WakeupPinTypeDef *sPinParams) +{ + uint32_t pinConfig; + uint32_t regMask; + const uint32_t pullMask = PWR_WKUPEPR_WKUPPUPD1; + + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(sPinParams->WakeUpPin)); + assert_param(IS_PWR_WAKEUP_PIN_POLARITY(sPinParams->PinPolarity)); + assert_param(IS_PWR_WAKEUP_PIN_PULL(sPinParams->PinPull)); + + pinConfig = sPinParams->WakeUpPin | \ + (sPinParams->PinPolarity << ((POSITION_VAL(sPinParams->WakeUpPin) + PWR_WKUPEPR_WKUPP1_Pos) & 0x1FU)) | \ + (sPinParams->PinPull << (((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) + PWR_WKUPEPR_WKUPPUPD1_Pos) & 0x1FU)); + + regMask = sPinParams->WakeUpPin | \ + (PWR_WKUPEPR_WKUPP1 << (POSITION_VAL(sPinParams->WakeUpPin) & 0x1FU)) | \ + (pullMask << ((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) & 0x1FU)); + + /* Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge) */ + MODIFY_REG(PWR->WKUPEPR, regMask, pinConfig); + + /* Configure the Wakeup Pin EXTI Line */ + MODIFY_REG(EXTI->IMR2, PWR_EXTI_WAKEUP_PINS_MASK, (sPinParams->WakeUpPin << EXTI_IMR2_IM55_Pos)); +} + +/** + * @brief Disable the Wake-up PINx functionality. + * @param WakeUpPin : Specifies the Wake-Up pin to be disabled. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 : Disable PA0 wake-up PIN. + * @arg PWR_WAKEUP_PIN2 : Disable PA2 wake-up PIN. + * @arg PWR_WAKEUP_PIN3 : Disable PC13 wake-up PIN. + * @arg PWR_WAKEUP_PIN4 : Disable PC1 wake-up PIN. + * @retval None + */ +void HAL_PWREx_DisableWakeUpPin(uint32_t WakeUpPin) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPin)); + + /* Disable the WakeUpPin */ + CLEAR_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Get the Wake-Up Pin pending flags. + * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Get wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Get wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Get wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG4 : Get wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Get Wakeup event received from all + * wake up pins. + * @retval The Wake-Up pin flag. + */ +uint32_t HAL_PWREx_GetWakeupFlag(uint32_t WakeUpFlag) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_FLAG(WakeUpFlag)); + + /* Return the wake up pin flag */ + return (PWR->WKUPFR & WakeUpFlag); +} + +/** + * @brief Clear the Wake-Up pin pending flag. + * @param WakeUpFlag: Specifies the Wake-Up PIN flag to clear. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Clear the wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Clear the wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Clear the wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG4 : Clear the wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Clear the wakeup events received from all + * wake up pins. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag(uint32_t WakeUpFlag) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_FLAG(WakeUpFlag)); + + /* Clear the wake up event received from wake up pin x */ + WRITE_REG(PWR->WKUPCR, WakeUpFlag); + + /* Check if the wake up event is well cleared */ + if ((PWR->WKUPFR & WakeUpFlag) != 0U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief This function handles the PWR WAKEUP PIN interrupt request. + * @note This API should be called under the WAKEUP_PIN_IRQHandler(). + * @retval None. + */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler(void) +{ + /* Wakeup pin EXTI line interrupt detected */ + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != 0U) + { + /* Clear PWR WKUPF1 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG(PWR_FLAG_WKUP1); + + /* PWR WKUP1 interrupt user callback */ + HAL_PWREx_WKUP1_Callback(); + } + + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF2) != 0U) + { + /* Clear PWR WKUPF2 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG(PWR_FLAG_WKUP2); + + /* PWR WKUP2 interrupt user callback */ + HAL_PWREx_WKUP2_Callback(); + } + + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF3) != 0U) + { + /* Clear PWR WKUPF3 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG(PWR_FLAG_WKUP3); + + /* PWR WKUP3 interrupt user callback */ + HAL_PWREx_WKUP3_Callback(); + } + + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF4) != 0U) + { + /* Clear PWR WKUPF4 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG(PWR_FLAG_WKUP4); + + /* PWR WKUP4 interrupt user callback */ + HAL_PWREx_WKUP4_Callback(); + } +} + +/** + * @brief PWR WKUP1 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP1_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP1Callback can be implemented in the user file + */ +} + +/** + * @brief PWR WKUP2 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP2_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP2Callback can be implemented in the user file + */ +} + +/** + * @brief PWR WKUP3 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP3_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP3Callback can be implemented in the user file + */ +} + +/** + * @brief PWR WKUP4 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP4_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP4Callback can be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group3 Peripherals Control Functions + * @brief Peripherals Control Functions + * +@verbatim + =============================================================================== + ##### Peripherals Control Functions ##### + =============================================================================== + + *** Main and Backup Regulators configuration *** + ================================================ + [..] + (+) The backup domain includes 4 Kbytes of backup SRAM accessible only + from the CPU, and addressed in 32-bit, 16-bit or 8-bit mode. Its + content is retained even in Standby or VBAT mode when the low power + backup regulator is enabled. It can be considered as an internal + EEPROM when VBAT is always present. You can use the + HAL_PWREx_EnableBkUpReg() function to enable the low power backup + regulator. + (+) When the backup domain is supplied by VDD (analog switch connected to + VDD) the backup SRAM is powered from VDD which replaces the VBAT power + supply to save battery life. + (+) The backup SRAM is not mass erased by a tamper event. It is read + protected to prevent confidential data, such as cryptographic private + key, from being accessed. The backup SRAM can be erased only through + the Flash interface when a protection level change from level 1 to + level 0 is requested. + -@- Refer to the description of Read protection (RDP) in the Flash + programming manual. + (+) The main internal regulator can be configured to have a tradeoff + between performance and power consumption when the device does not + operate at the maximum frequency. This is done through + HAL_PWREx_ControlVoltageScaling(VOS) function which configure the VOS + bit in PWR_CSR4 register. + (+) The main internal regulator can be configured to operate in Low Power + mode when the system enters STOP mode to further reduce power + consumption. + This is done through HAL_PWREx_ControlStopModeVoltageScaling(SVOS) + function which configure the SVOS bit in PWR_CR1 register. + -@- Refer to the product datasheets for more details. + + *** USB Regulator configuration *** + =================================== + [..] + (+) The USB transceivers are supplied from a dedicated VDD33USB supply + that can be provided either by the integrated USB regulator, or by an + external USB supply. + (+) The USB regulator is enabled by HAL_PWREx_EnableUSBReg() function, the + VDD33USB is then provided from the USB regulator. + (+) When the USB regulator is enabled, the VDD33USB supply level detector + shall be enabled through HAL_PWREx_EnableUSBVoltageDetector() + function. + (+) The USB regulator is disabled through HAL_PWREx_DisableUSBReg() + function and VDD33USB can be provided from an external supply. In this + case VDD33USB and VDD50USB shall be connected together. + + *** VBAT battery charging *** + ============================= + [..] + (+) When VDD is present, the external battery connected to VBAT can be + charged through an internal resistance. VBAT charging can be performed + either through a 5 KOhm resistor or through a 1.5 KOhm resistor. + (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging + (ResistorValue) function with: + (++) ResistorValue: + (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor. + (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor. + (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging() + function. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) +{ + uint32_t tickstart; + + /* Enable the Backup regulator */ + SET_BIT(PWR->CSR1, PWR_CSR1_BREN); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till Backup regulator ready flag is set */ + while ((PWR->CSR1 & PWR_CSR1_BRRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) +{ + uint32_t tickstart; + + /* Disable the Backup regulator */ + CLEAR_BIT(PWR->CSR1, PWR_CSR1_BREN); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till Backup regulator ready flag is reset */ + while ((PWR->CSR1 & PWR_CSR1_BRRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB Regulator. + * @retval None. + */ +void HAL_PWREx_EnableUSBReg(void) +{ + /* Enable the USB regulator */ + SET_BIT(PWR->CSR2, PWR_CSR2_USBREGEN); +} + +/** + * @brief Disable the USB Regulator. + * @retval None. + */ +void HAL_PWREx_DisableUSBReg(void) +{ + /* Disable the USB regulator */ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USBREGEN); +} + +/** + * @brief Enable the USB voltage level detector. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableUSBVoltageDetector(void) +{ + uint32_t tickstart; + + /* Enable the USB voltage detector */ + SET_BIT(PWR->CSR2, PWR_CSR2_USB33DEN); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till the USB regulator ready flag is set */ + while ((PWR->CSR2 & PWR_CSR2_USB33RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief Disable the USB voltage level detector. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableUSBVoltageDetector(void) +{ + uint32_t tickstart; + + /* Disable the USB voltage detector */ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USB33DEN); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till the USB regulator ready flag is reset */ + while ((PWR->CSR2 & PWR_CSR2_USB33RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB HS regulator. + * @retval None. + */ +void HAL_PWREx_EnableUSBHSregulator(void) +{ + /* Enable the USB HS regulator */ + SET_BIT(PWR->CSR2, PWR_CSR2_USBHSREGEN); +} + +/** + * @brief Disable the USB HS regulator. + * @retval None. + */ +void HAL_PWREx_DisableUSBHSregulator(void) +{ + /* Disable the USB HS regulator */ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_USBHSREGEN); +} + +/** + * @brief Enable UCPD configuration memorization in Standby. + * @retval None + * @note This function must be called just before entering Standby mode when using UCPD. + */ +void HAL_PWREx_EnableUCPDStandbyMode(void) +{ + /* Memorize UCPD configuration when entering standby mode */ + SET_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_STBY); +} + +/** + * @brief Disable UCPD configuration memorization in Standby. + * @note This function must be called on exiting the Standby mode and before any UCPD + * configuration update. + * @retval None + */ +void HAL_PWREx_DisableUCPDStandbyMode(void) +{ + CLEAR_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_STBY); +} + +/** + * @brief Enable dead battery behavior. + * @retval None + */ +void HAL_PWREx_EnableUCPDDeadBattery(void) +{ + /* Enable dead battery behavior */ + CLEAR_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_DBDIS); +} + +/** + * @brief Disable dead battery behavior. + * @retval None + */ +void HAL_PWREx_DisableUCPDDeadBattery(void) +{ + /* Disable dead battery behavior */ + SET_BIT(PWR->UCPDR, PWR_UCPDR_UCPD_DBDIS); +} + +/** + * @brief Enable the Battery charging. + * @note When VDD is present, charge the external battery through an internal + * resistor. + * It is automatically disabled in VBAT mode. + * @param ResistorValue : Specifies the charging resistor. + * This parameter can be one of the following values : + * @arg PWR_BATTERY_CHARGING_RESISTOR_5 : 5 KOhm resistor. + * @arg PWR_BATTERY_CHARGING_RESISTOR_1_5 : 1.5 KOhm resistor. + * @retval None. + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue) +{ + /* Check the parameter */ + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorValue)); + + /* Specify the charging resistor and enable the Battery charging */ + MODIFY_REG(PWR->CSR2, (PWR_CSR2_VBRS | PWR_CSR2_VBE), (ResistorValue | PWR_CSR2_VBE)); + +} + +/** + * @brief Disable the Battery charging. + * @retval None. + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + /* Disable the Battery charging and restore default charging resistor value */ + CLEAR_BIT(PWR->CSR2, (PWR_CSR2_VBE | PWR_CSR2_VBRS)); +} + +/** + * @brief Enable the booster to guarantee the analog switch AC performance when + * the VDD supply voltage is below 2V7. + * @note The VDD supply voltage can be monitored through the PVD and the PLS + * field bits. + * @retval None. + */ +void HAL_PWREx_EnableAnalogBooster(void) +{ + /* Enable the Analog voltage */ + SET_BIT(PWR->CR1, PWR_CR1_AVDREADY); + + /* Enable VDDA booster */ + SET_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the analog booster. + * @retval None. + */ +void HAL_PWREx_DisableAnalogBooster(void) +{ + /* Disable VDDA booster */ + CLEAR_BIT(PWR->CR1, PWR_CR1_BOOSTE); + + /* Disable the Analog voltage */ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDREADY); +} + +/** + * @brief Enable the XSPIM_P1 interface. + * @note The XSPIM_P1 supply must be stable prior to setting + this bit. + * @retval None. + */ +void HAL_PWREx_EnableXSPIM1(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM1); +} + +/** + * @brief Disable the XSPIM_P1 interface. + * @retval None. + */ +void HAL_PWREx_DisableXSPIM1(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM1); +} + +/** + * @brief Enable the XSPIM_P2 interface. + * @note The XSPIM_P2 supply must be stable prior to setting + this bit. + * @retval None. + */ +void HAL_PWREx_EnableXSPIM2(void) +{ + SET_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM2); +} + +/** + * @brief Disable the XSPIM_P2 interface. + * @retval None. + */ +void HAL_PWREx_DisableXSPIM2(void) +{ + CLEAR_BIT(PWR->CSR2, PWR_CSR2_EN_XSPIM2); +} + +/** + * @brief Configure the capacitor port + * @param PortCapacitor Select the Port + * This parameter can be one of the following values: + * @arg @ref PWR_CAPACITOR_PORT1 XSPI port 1 capacitor + * @arg @ref PWR_CAPACITOR_PORT2 XSPI port 2 capacitor + * @param PortCapacitorSetting Select the capacitor setting + * This parameter can be one of the following values: + * @arg @ref PWR_CAPACITOR_OFF XSPI Capacitor OFF + * @arg @ref PWR_CAPACITOR_ONE_THIRD_CAPACITANCE XSPI Capacitor set to 1/3 + * @arg @ref PWR_CAPACITOR_TWO_THIRD_CAPACITANCE XSPI Capacitor set to 2/3 + * @arg @ref PWR_CAPACITOR_FULL_CAPACITANCE XSPI Capacitor set to full capacitance + * @retval None. + */ +void HAL_PWREx_ConfigXSPIPortCap(uint32_t PortCapacitor, uint32_t PortCapacitorSetting) +{ + /* Check the parameters */ + assert_param(IS_PWR_CAPACITOR(PortCapacitor)); + assert_param(IS_PWR_CAPACITOR_SETTING(PortCapacitorSetting)); + + if (PortCapacitor == PWR_CAPACITOR_PORT1) + { + /* Set Port1 Capacitor setting */ + MODIFY_REG(PWR->CSR2, PWR_CSR2_XSPICAP1, PortCapacitorSetting); + } + else + { + /* Set Port2 Capacitor setting */ + MODIFY_REG(PWR->CSR2, PWR_CSR2_XSPICAP2, PortCapacitorSetting << (PWR_CSR2_XSPICAP2_Pos - PWR_CSR2_XSPICAP1_Pos)); + } +} + +/** + * @brief Get the capacitor port setting + * @param PortCapacitor Select the Port + * This parameter can be one of the following values: + * @arg @ref PWR_CAPACITOR_PORT1 XSPI port 1 capacitor + * @arg @ref PWR_CAPACITOR_PORT2 XSPI port 2 capacitor + * @retval The capacitor setting: + * @arg @ref PWR_CAPACITOR_OFF XSPI Capacitor OFF + * @arg @ref PWR_CAPACITOR_ONE_THIRD_CAPACITANCE XSPI Capacitor set to 1/3 + * @arg @ref PWR_CAPACITOR_TWO_THIRD_CAPACITANCE XSPI Capacitor set to 2/3 + * @arg @ref PWR_CAPACITOR_FULL_CAPACITANCE XSPI Capacitor set to full capacitance + */ +uint32_t HAL_PWREx_GetConfigXSPIPortCap(uint32_t PortCapacitor) +{ + uint32_t PortCapacitorSetting; + + /* Check the parameter */ + assert_param(IS_PWR_CAPACITOR(PortCapacitor)); + + if (PortCapacitor == PWR_CAPACITOR_PORT1) + { + /* Get Port1 Capacitor setting */ + PortCapacitorSetting = READ_BIT(PWR->CSR2, PWR_CSR2_XSPICAP1); + } + else + { + /* Get Port2 Capacitor setting */ + PortCapacitorSetting = (READ_BIT(PWR->CSR2, PWR_CSR2_XSPICAP2) >> (PWR_CSR2_XSPICAP2_Pos - PWR_CSR2_XSPICAP1_Pos)); + } + + return PortCapacitorSetting; +} + +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @brief Power Monitoring functions + * +@verbatim + =============================================================================== + ##### Power Monitoring functions ##### + =============================================================================== + + *** VBAT and Temperature supervision *** + ======================================== + [..] + (+) The VBAT battery voltage supply can be monitored by comparing it with + two threshold levels: VBAThigh and VBATlow. VBATH flag and VBATL flags + in the PWR control register 2 (PWR_CR2), indicate if VBAT is higher or + lower than the threshold. + (+) The temperature can be monitored by comparing it with two threshold + levels, TEMPhigh and TEMPlow. TEMPH and TEMPL flags, in the PWR + control register 2 (PWR_CR2), indicate whether the device temperature + is higher or lower than the threshold. + (+) The VBAT and the temperature monitoring is enabled by + HAL_PWREx_EnableMonitoring() function and disabled by + HAL_PWREx_DisableMonitoring() function. + (+) The HAL_PWREx_GetVBATLevel() function returns the VBAT level which can + be : PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or + PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD. + (+) The HAL_PWREx_GetTemperatureLevel() function returns the Temperature + level which can be : + PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or + PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD. + + *** AVD configuration *** + ========================= + [..] + (+) The AVD is used to monitor the VDDA power supply by comparing it to a + threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CR1 + register). + (+) A AVDO flag is available to indicate if VDDA is higher or lower + than the AVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_AVD_EXTI_ENABLE_IT() macro. + (+) The AVD is stopped in System Standby mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_EnableMonitoring(void) +{ + /* Enable the VBAT and Temperature monitoring */ + SET_BIT(PWR->CSR1, PWR_CSR1_MONEN); +} + +/** + * @brief Disable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_DisableMonitoring(void) +{ + /* Disable the VBAT and Temperature monitoring */ + CLEAR_BIT(PWR->CSR1, PWR_CSR1_MONEN); +} + +/** + * @brief Indicate whether the junction temperature is between, above or below + * the thresholds. + * @retval Temperature level. + */ +uint32_t HAL_PWREx_GetTemperatureLevel(void) +{ + uint32_t tempLevel; + uint32_t regValue; + + /* Read the temperature flags */ + regValue = READ_BIT(PWR->CSR1, (PWR_CSR1_TEMPH | PWR_CSR1_TEMPL)); + + /* Check if the temperature is below the threshold */ + if (regValue == PWR_CSR1_TEMPL) + { + tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD; + } + /* Check if the temperature is above the threshold */ + else if (regValue == PWR_CSR1_TEMPH) + { + tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD; + } + /* The temperature is between the thresholds */ + else + { + tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return tempLevel; +} + +/** + * @brief Indicate whether the Battery voltage level is between, above or below + * the thresholds. + * @retval VBAT level. + */ +uint32_t HAL_PWREx_GetVBATLevel(void) +{ + uint32_t vbatLevel; + uint32_t regValue; + + /* Read the VBAT flags */ + regValue = READ_BIT(PWR->CSR1, (PWR_CSR1_VBATH | PWR_CSR1_VBATL)); + + /* Check if the VBAT is below the threshold */ + if (regValue == PWR_CSR1_VBATL) + { + vbatLevel = PWR_VBAT_BELOW_LOW_THRESHOLD; + } + /* Check if the VBAT is above the threshold */ + else if (regValue == PWR_CSR1_VBATH) + { + vbatLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD; + } + /* The VBAT is between the thresholds */ + else + { + vbatLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return vbatLevel; +} + +/** + * @brief Configure the event mode and the voltage threshold detected by the + * Analog Voltage Detector (AVD). + * @param sConfigAVD : Pointer to an PWREx_AVDTypeDef structure that contains + * the configuration information for the AVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note As PVD and AVD share the same EXTI line, the EXTI operating mode to + * configure will replace a possible previous configuration done through + * HAL_PWR_ConfigPVD. + * @retval None. + */ +void HAL_PWREx_ConfigAVD(const PWREx_AVDTypeDef *sConfigAVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_AVD_LEVEL(sConfigAVD->AVDLevel)); + assert_param(IS_PWR_AVD_MODE(sConfigAVD->Mode)); + + /* Set the ALS[18:17] bits according to AVDLevel value */ + MODIFY_REG(PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel); + + /* Clear any previous config */ + __HAL_PWR_AVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_AVD_EXTI_DISABLE_IT(); + + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); + + /* Configure the interrupt mode */ + if ((sConfigAVD->Mode & AVD_MODE_IT) == AVD_MODE_IT) + { + __HAL_PWR_AVD_EXTI_ENABLE_IT(); + } + + /* Configure the event mode */ + if ((sConfigAVD->Mode & AVD_MODE_EVT) == AVD_MODE_EVT) + { + __HAL_PWR_AVD_EXTI_ENABLE_EVENT(); + } + + /* Rising edge configuration */ + if ((sConfigAVD->Mode & AVD_RISING_EDGE) == AVD_RISING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); + } + + /* Falling edge configuration */ + if ((sConfigAVD->Mode & AVD_FALLING_EDGE) == AVD_FALLING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enable the Analog Voltage Detector (AVD). + * @retval None. + */ +void HAL_PWREx_EnableAVD(void) +{ + /* Enable the Analog Voltage Detector */ + SET_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable the Analog Voltage Detector(AVD). + * @retval None. + */ +void HAL_PWREx_DisableAVD(void) +{ + /* Disable the Analog Voltage Detector */ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief This function handles the PWR PVD/AVD interrupt request. + * @note This API should be called under the PVD_AVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_AVD_IRQHandler(void) +{ + /* Check PWR EXTI flags for PVD/AVD */ + if (((EXTI->PR1) & EXTI_PR1_PR16) != 0U) + { + /* Clear PVD/AVD exti pending bit */ + WRITE_REG(EXTI->PR1, EXTI_PR1_PR16); + + /* PWR PVD/AVD interrupt user callback */ + HAL_PWREx_PVD_AVD_Callback(); + } +} + +/** + * @brief PWR PVD/AVD interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_PVD_AVD_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_PVD_AVD_Callback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group5 I/O Pull-Up Pull-Down Configuration Functions + * @brief I/O pull-up / pull-down configuration functions + * +@verbatim + =============================================================================== + ##### Voltage monitoring Functions ##### + =============================================================================== + [..] + In Standby mode, pull up and pull down can be configured to + maintain an I/O in the selected state. If the APC bit in the PWR_APCR + register is set, the I/Os can be configured either with a pull-up through + PWR_PUCRx registers (x=N,O), or with a pull-down through + PWR_PDCRx registers (x=N,O,P), or can be kept in analog state + if none of the PWR_PUCRx or PWR_PDCRx register is set. + + [..] + The pull-down configuration has highest priority over pull-up + configuration in case both PWR_PUCRx and PWR_PDCRx are set for the same + I/O. + +@endverbatim + * @{ + */ + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations + * defined in PWR_PUCRx and PWR_PDCRx registers are applied in Standby + * mode. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the + * corresponding PDy bit of PWR_PDCRx register is also set (pull-down + * configuration priority is higher). HAL_PWREx_EnableGPIOPullUp() and + * HAL_PWREx_EnableGPIOPullDown() API's ensure there is no conflict + * when setting PUy or PDy bit. + * @retval None. + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->APCR, PWR_APCR_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations + * defined in PWR_PUCRx and PWR_PDCRx registers are not applied in + * Standby mode. + * @retval None. + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->APCR, PWR_APCR_APC); +} + +/** + * @brief Enable GPIO pull-up state in Standby mode. + * @note Set the relevant PUy bits of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby mode. + * @note This state is effective in Standby mode only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is maintained when exiting the Standby mode. + * @note Even if a PUy bit to set is reserved, the other PUy bits entered as + * input parameter at the same time are set. + * @note The pullup is not activated if the corresponding PDy bit is also set. + * @param GPIO_Port : Specify the IO port. + * This parameter can be a value of @ref PWREx_GPIO_PullUp_Port. + * @param GPIO_Pin : Specify the I/O pins numbers. + * This parameter can be a combination of @ref PWREx_GPIO_PullUp_Pin_Mask. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_GPIO_PULLPUP_PORT(GPIO_Port)); + assert_param(IS_PWR_GPIO_PIN_MASK(GPIO_Pin)); + + switch (GPIO_Port) + { + case PWR_GPIO_PULLUP_PORT_N: + SET_BIT(PWR->PUCRN, GPIO_Pin); + break; + + case PWR_GPIO_PULLUP_PORT_O: + SET_BIT(PWR->PUCRO, GPIO_Pin); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Disable GPIO pull-up state in Standby mode. + * @note Reset the relevant PUy bits of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby mode. + * @note Even if a PUy bit to reset is reserved, the other PUy bits entered as input + * parameter at the same time are reset. + * @param GPIO_Port : Specify the IO port. + * This parameter can be a value of @ref PWREx_GPIO_PullUp_Port. + * @param GPIO_Pin : Specify the I/O pins numbers. + * This parameter can be a combination of @ref PWREx_GPIO_PullUp_Pin_Mask. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_GPIO_PULLPUP_PORT(GPIO_Port)); + assert_param(IS_PWR_GPIO_PIN_MASK(GPIO_Pin)); + + switch (GPIO_Port) + { + case PWR_GPIO_PULLUP_PORT_N: + CLEAR_BIT(PWR->PUCRN, GPIO_Pin); + break; + + case PWR_GPIO_PULLUP_PORT_O: + CLEAR_BIT(PWR->PUCRO, GPIO_Pin); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Enable GPIO pull-down state in Standby mode. + * @note Set the relevant PDy bits of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby mode. + * @note This state is effective in Standby mode only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is maintained when exiting the Standby mode. + * @note Even if a PDy bit to set is reserved, the other PDy bits entered as input + * parameter at the same time are set. + * @param GPIO_Port : Specify the IO port. + * This parameter can be a value of @ref PWREx_GPIO_PullDown_Port. + * @param GPIO_Pin : Specify the I/O pins numbers. + * This parameter can be a combination of @ref PWREx_GPIO_PullDown_Pin_Mask. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_GPIO_PULLDOWN_PORT(GPIO_Port)); + assert_param(IS_PWR_GPIO_PIN_MASK(GPIO_Pin)); + + switch (GPIO_Port) + { + case PWR_GPIO_PULLDOWN_PORT_N: + SET_BIT(PWR->PDCRN, GPIO_Pin); + break; + + case PWR_GPIO_PULLDOWN_PORT_O: + SET_BIT(PWR->PDCRO, GPIO_Pin); + break; + + case PWR_GPIO_PULLDOWN_PORT_P: + SET_BIT(PWR->PDCRP, GPIO_Pin); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Disable GPIO pull-down state in Standby mode. + * @note Reset the relevant PDy bits of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby mode. + * @note Even if a PDy bit to reset is reserved, the other PDy bits entered as input + * parameter at the same time are reset. + * @param GPIO_Port : Specify the IO port. + * This parameter can be a value of @ref PWREx_GPIO_PullDown_Port. + * @param GPIO_Pin : Specify the I/O pins numbers. + * This parameter can be a value of @ref PWREx_GPIO_PullDown_Pin_Mask. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_GPIO_PULLDOWN_PORT(GPIO_Port)); + assert_param(IS_PWR_GPIO_PIN_MASK(GPIO_Pin)); + + switch (GPIO_Port) + { + case PWR_GPIO_PULLDOWN_PORT_N: + CLEAR_BIT(PWR->PDCRN, GPIO_Pin); + break; + + case PWR_GPIO_PULLDOWN_PORT_O: + CLEAR_BIT(PWR->PDCRO, GPIO_Pin); + break; + + case PWR_GPIO_PULLDOWN_PORT_P: + CLEAR_BIT(PWR->PDCRP, GPIO_Pin); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ramecc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ramecc.c new file mode 100644 index 000000000..c1b69e253 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_ramecc.c @@ -0,0 +1,966 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_ramecc.c + * @author MCD Application Team + * @brief RAMECC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the RAM ECC monitoring (RAMECC) peripheral: + * + Initialization and de-initialization functions + * + Monitoring operation functions + * + Error information functions + * + State and error functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and latch error information through HAL_RAMECC_Init(). + + (#) For a given Monitor, enable and disable interrupt through + HAL_RAMECC_EnableNotification(). + To enable a notification for a given RAMECC instance, use global + interrupts. + To enable a notification for only RAMECC monitor, use monitor interrupts. + All possible notifications are defined in the driver header file under + RAMECC_Interrupt group. + + *** Silent mode *** + =================== + [..] + (+) Use HAL_RAMECC_StartMonitor() to start RAMECC latch failing + information without enabling any notification. + + *** Interrupt mode *** + ====================== + [..] + (+) Use HAL_RAMECC_EnableNotification() to enable interrupts for a + given error. + (+) Configure the RAMECC interrupt priority using + HAL_NVIC_SetPriority(). + (+) Enable the RAMECC IRQ handler using HAL_NVIC_EnableIRQ(). + (+) Start RAMECC latch failing information using HAL_RAMECC_StartMonitor(). + + *** Failing information *** + ====================== + [..] + (#) Use HAL_RAMECC_GetFailingAddress() function to return the RAMECC + failing address. + (#) Use HAL_RAMECC_GetFailingDataLow() function to return the RAMECC + failing data low. + (#) Use HAL_RAMECC_GetFailingDataHigh() function to return the RAMECC + failing data high. + (#) Use HAL_RAMECC_GetHammingErrorCode() function to return the RAMECC + Hamming bits injected. + (#) Use HAL_RAMECC_IsECCSingleErrorDetected() function to check if a single + error was detected and corrected. + (#) Use HAL_RAMECC_IsECCDoubleErrorDetected() function to check if a double + error was dedetected. + + *** RAMECC HAL driver macros list *** + ============================================= + [..] + Below the list of used macros in RAMECC HAL driver. + + (+) __HAL_RAMECC_ENABLE_IT : Enable the specified ECCRAM Monitor + interrupts. + (+) __HAL_RAMECC_DISABLE_IT : Disable the specified ECCRAM Monitor + interrupts. + (+) __HAL_RAMECC_GET_FLAG : Return the current RAMECC Monitor selected + flag. + (+) __HAL_RAMECC_CLEAR_FLAG : Clear the current RAMECC Monitor selected + flag. + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup RAMECC RAMECC + * @brief RAMECC HAL module driver + * @{ + */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RAMECC_Exported_Functions + * @{ + */ + +/** @addtogroup RAMECC_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the RAMECC Monitor. + [..] + The HAL_RAMECC_Init() function follows the RAMECC configuration procedures + as described in reference manual. + The HAL_RAMECC_DeInit() function allows to deinitialize the RAMECC monitor. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RAMECC by clearing flags and disabling interrupts. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_Init(RAMECC_HandleTypeDef *hramecc) +{ + /* Check the RAMECC peripheral handle */ + if (hramecc == NULL) + { + /* Return HAL status */ + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_BUSY; + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + /* Check if a valid MSP API was registered */ + if (hramecc->MspInitCallback == NULL) + { + /* Init the low level hardware */ + hramecc->MspInitCallback = HAL_RAMECC_MspInit; + } + + /* Init the low level hardware */ + hramecc->MspInitCallback(hramecc); +#else + HAL_RAMECC_MspInit(hramecc); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + + /* Disable RAMECC monitor */ + hramecc->Instance->CR &= ~RAMECC_CR_ECCELEN; + + /* Disable all global interrupts */ + ((RAMECC_TypeDef *)((uint32_t)hramecc->Instance & 0xFFFFFF00U))->IER &= \ + ~(RAMECC_IER_GIE | RAMECC_IER_GECCSEIE | RAMECC_IER_GECCDEIE | RAMECC_IER_GECCDEBWIE); + + /* Disable all interrupts monitor */ + hramecc->Instance->CR &= ~(RAMECC_CR_ECCSEIE | RAMECC_CR_ECCDEIE | RAMECC_CR_ECCDEBWIE); + + /* Clear RAMECC monitor flags */ + __HAL_RAMECC_CLEAR_FLAG(hramecc, RAMECC_FLAGS_ALL); + + /* Initialise the RAMECC error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_NONE; + + /* Update the RAMECC state */ + hramecc->State = HAL_RAMECC_STATE_READY; + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief DeInitializes the RAMECC peripheral. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_DeInit(RAMECC_HandleTypeDef *hramecc) +{ + /* Check the RAMECC peripheral handle */ + if (hramecc == NULL) + { + /* Return HAL status */ + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Disable RAMECC monitor */ + hramecc->Instance->CR &= ~RAMECC_CR_ECCELEN; + + /* Disable all global interrupts */ + ((RAMECC_TypeDef *)((uint32_t)hramecc->Instance & 0xFFFFFF00U))->IER &= \ + ~(RAMECC_IER_GIE | RAMECC_IER_GECCSEIE | RAMECC_IER_GECCDEIE | RAMECC_IER_GECCDEBWIE); + + /* Disable all interrupts monitor */ + hramecc->Instance->CR &= ~(RAMECC_CR_ECCSEIE | RAMECC_CR_ECCDEIE | RAMECC_CR_ECCDEBWIE); + + /* Clear RAMECC monitor flags */ + __HAL_RAMECC_CLEAR_FLAG(hramecc, RAMECC_FLAGS_ALL); + + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + /* Check if a valid MSP API was registered */ + if (hramecc->MspDeInitCallback != NULL) + { + /* Init the low level hardware */ + hramecc->MspDeInitCallback(hramecc); + } + + /* Clean callbacks */ + hramecc->DetectSingleErrorCallback = NULL; + hramecc->DetectDoubleErrorCallback = NULL; +#else + HAL_RAMECC_MspDeInit(hramecc); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + + /* Initialise the RAMECC error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_NONE; + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_RESET; + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Initialize the RAMECC MSP. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC. + * @retval None. + */ +__weak void HAL_RAMECC_MspInit(RAMECC_HandleTypeDef *hramecc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hramecc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RAMECC_MspInit can be implemented in the user file */ +} + +/** + * @brief DeInitialize the RAMECC MSP. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC. + * @retval None. + */ +__weak void HAL_RAMECC_MspDeInit(RAMECC_HandleTypeDef *hramecc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hramecc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RAMECC_MspDeInit can be implemented in the user file */ +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RAMECC_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### Monitoring operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure latching error information. + (+) Configure RAMECC Global/Monitor interrupts. + (+) Register and Unregister RAMECC callbacks + (+) Handle RAMECC interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the RAMECC latching error information. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_StartMonitor(RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_BUSY; + + /* Enable RAMECC monitor */ + hramecc->Instance->CR |= RAMECC_CR_ECCELEN; + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_READY; + } + else + { + /* Update the error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_BUSY; + + /* Return HAL status */ + return HAL_ERROR; + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief Stop the RAMECC latching error information. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_StopMonitor(RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_BUSY; + + /* Disable RAMECC monitor */ + hramecc->Instance->CR &= ~RAMECC_CR_ECCELEN; + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_READY; + } + else + { + /* Update the error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_BUSY; + + /* Return HAL status */ + return HAL_ERROR; + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief Enable the RAMECC error interrupts. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC Monitor. + * @param Notifications Select the notification. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_EnableNotification(RAMECC_HandleTypeDef *hramecc, uint32_t Notifications) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + assert_param(IS_RAMECC_INTERRUPT(Notifications)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_BUSY; + + /* Enable RAMECC interrupts */ + __HAL_RAMECC_ENABLE_IT(hramecc, Notifications); + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_READY; + } + else + { + /* Update the error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_BUSY; + + /* Return HAL status */ + return HAL_ERROR; + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief Disable the RAMECC error interrupts. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC Monitor. + * @param Notifications Select the notification. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_DisableNotification(RAMECC_HandleTypeDef *hramecc, uint32_t Notifications) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + assert_param(IS_RAMECC_INTERRUPT(Notifications)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_BUSY; + + /* Disable RAMECC interrupts */ + __HAL_RAMECC_DISABLE_IT(hramecc, Notifications); + + /* Change RAMECC peripheral state */ + hramecc->State = HAL_RAMECC_STATE_READY; + } + else + { + /* Update the error code */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_BUSY; + + /* Return HAL status */ + return HAL_ERROR; + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** @addtogroup RAMCECC_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### Handle Interrupt and Callbacks Functions ##### + =============================================================================== + [..] + This section provides functions to handle RAMECC interrupts and + Register / UnRegister the different callbacks. + [..] + The HAL_RAMECC_IRQHandler() function allows handling the active RAMECC + interrupt request. + The HAL_RAMECC_RegisterCallback() function allows registering the selected + RAMECC callbacks. + The HAL_RAMECC_UnRegisterCallback() function allows unregistering the + selected RAMECC callbacks. +@endverbatim + * @{ + */ + +/** + * @brief Handles RAMECC interrupt request. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval None. + */ +void HAL_RAMECC_IRQHandler(RAMECC_HandleTypeDef *hramecc) +{ + uint32_t monitor_it_source; + uint32_t global_it_source; + + monitor_it_source = READ_REG(hramecc->Instance->CR); + global_it_source = READ_REG(((RAMECC_TypeDef *)((uint32_t)hramecc->Instance & 0xFFFFFF00U))->IER); + + /* Single Error Interrupt Management ****************************************/ + if (((monitor_it_source & RAMECC_CR_ECCSEIE) == RAMECC_CR_ECCSEIE) || + ((global_it_source & RAMECC_IER_GECCSEIE) == RAMECC_IER_GECCSEIE) || + ((global_it_source & RAMECC_IER_GIE) == RAMECC_IER_GIE)) + { + if (__HAL_RAMECC_GET_FLAG(hramecc, RAMECC_FLAG_SINGLEERR_R) != 0U) + { + /* Clear active flags */ + __HAL_RAMECC_CLEAR_FLAG(hramecc, RAMECC_FLAG_SINGLEERR_R); + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + /* Check if a valid single error callback is registered */ + if (hramecc->DetectSingleErrorCallback != NULL) + { + /* Single error detection callback */ + hramecc->DetectSingleErrorCallback(hramecc); + } +#else + HAL_RAMECC_DetectSingleErrorCallback(hramecc); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + } + } + + /* Double Error Interrupt Management ****************************************/ + if (((monitor_it_source & RAMECC_CR_ECCDEIE) == RAMECC_CR_ECCDEIE) || + ((monitor_it_source & RAMECC_CR_ECCDEBWIE) == RAMECC_CR_ECCDEBWIE) || + ((global_it_source & RAMECC_IER_GECCDEIE) == RAMECC_IER_GECCDEIE) || + ((global_it_source & RAMECC_IER_GECCDEBWIE) == RAMECC_IER_GECCDEBWIE) || + ((global_it_source & RAMECC_IER_GIE) == RAMECC_IER_GIE)) + { + /* ECC double error detected flag */ + if (__HAL_RAMECC_GET_FLAG(hramecc, RAMECC_FLAG_DOUBLEERR_R) != 0U) + { + /* Clear active flags */ + __HAL_RAMECC_CLEAR_FLAG(hramecc, RAMECC_FLAG_DOUBLEERR_R); + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + /* Check if a valid Double error callback is registered */ + if (hramecc->DetectDoubleErrorCallback != NULL) + { + /* Double error detection callback */ + hramecc->DetectDoubleErrorCallback(hramecc); + } +#else + HAL_RAMECC_DetectDoubleErrorCallback(hramecc); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + } + + /* ECC double error on byte write */ + if (__HAL_RAMECC_GET_FLAG(hramecc, RAMECC_FLAG_DOUBLEERR_W) != 0U) + { + /* Clear active flags */ + __HAL_RAMECC_CLEAR_FLAG(hramecc, RAMECC_FLAG_DOUBLEERR_W); + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) + /* Check if a valid Double error callback is registered */ + if (hramecc->DetectDoubleErrorCallback != NULL) + { + /* Double error detection callback */ + hramecc->DetectDoubleErrorCallback(hramecc); + } +#else + HAL_RAMECC_DetectDoubleErrorCallback(hramecc); +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief RAMECC single error detection callback. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC. + * @retval None. + */ +__weak void HAL_RAMECC_DetectSingleErrorCallback(RAMECC_HandleTypeDef *hramecc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hramecc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RAMECC_DetectSingleErrorCallback can be implemented in + the user file. */ +} + +/** + * @brief RAMECC double error detection callback. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC. + * @retval None. + */ +__weak void HAL_RAMECC_DetectDoubleErrorCallback(RAMECC_HandleTypeDef *hramecc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hramecc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RAMECC_DetectDoubleErrorCallback can be implemented in + the user file. */ +} + +#if (USE_HAL_RAMECC_REGISTER_CALLBACKS == 1) +/** + * @brief Register RAMECC callbacks. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC instance. + * @param CallbackID : User Callback identifier a HAL_RAMECC_CallbackIDTypeDef + * ENUM as parameter. + * @param pCallback : Pointer to private callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_RegisterCallback(RAMECC_HandleTypeDef *hramecc, + HAL_RAMECC_CallbackIDTypeDef CallbackID, + void (* pCallback)(RAMECC_HandleTypeDef *_hramecc)) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code and return error */ + hramecc->ErrorCode |= HAL_RAMECC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + switch (CallbackID) + { + case HAL_RAMECC_SE_DETECT_CB_ID: + /* Register single error callback */ + hramecc->DetectSingleErrorCallback = pCallback; + break; + + case HAL_RAMECC_DE_DETECT_CB_ID: + /* Register double error callback */ + hramecc->DetectDoubleErrorCallback = pCallback; + break; + + case HAL_RAMECC_MSPINIT_CB_ID : + /* Register msp init callback */ + hramecc->MspInitCallback = pCallback; + break; + + case HAL_RAMECC_MSPDEINIT_CB_ID : + /* Register msp de-init callback */ + hramecc->MspDeInitCallback = pCallback; + break; + + default: + /* Update the error code and return error */ + hramecc->ErrorCode |= HAL_RAMECC_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else if (hramecc->State == HAL_RAMECC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_RAMECC_MSPINIT_CB_ID : + /* Register msp init callback */ + hramecc->MspInitCallback = pCallback; + break; + + case HAL_RAMECC_MSPDEINIT_CB_ID : + /* Register msp de-init callback */ + hramecc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code and return error */ + hramecc->ErrorCode |= HAL_RAMECC_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code and return error */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister RAMECC callbacks. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC instance. + * @param CallbackID : User Callback identifier a HAL_RAMECC_CallbackIDTypeDef + * ENUM as parameter. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_RAMECC_UnRegisterCallback(RAMECC_HandleTypeDef *hramecc, HAL_RAMECC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Check RAMECC state */ + if (hramecc->State == HAL_RAMECC_STATE_READY) + { + switch (CallbackID) + { + case HAL_RAMECC_SE_DETECT_CB_ID: + /* UnRegister single error callback */ + hramecc->DetectSingleErrorCallback = NULL; + break; + + case HAL_RAMECC_DE_DETECT_CB_ID: + /* UnRegister double error callback */ + hramecc->DetectDoubleErrorCallback = NULL; + break; + + case HAL_RAMECC_MSPINIT_CB_ID : + /* UnRegister msp init callback */ + hramecc->MspInitCallback = NULL; + break; + + case HAL_RAMECC_MSPDEINIT_CB_ID : + /* UnRegister msp de-init callback */ + hramecc->MspDeInitCallback = NULL; + break; + + case HAL_RAMECC_ALL_CB_ID: + /* UnRegister all available callbacks */ + hramecc->DetectSingleErrorCallback = NULL; + hramecc->DetectDoubleErrorCallback = NULL; + hramecc->MspDeInitCallback = NULL; + hramecc->MspInitCallback = NULL; + break; + + default: + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hramecc->State == HAL_RAMECC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_RAMECC_MSPINIT_CB_ID : + /* UnRegister msp init callback */ + hramecc->MspInitCallback = NULL; + break; + + case HAL_RAMECC_MSPDEINIT_CB_ID : + /* UnRegister msp de-init callback */ + hramecc->MspDeInitCallback = NULL; + break; + + case HAL_RAMECC_ALL_CB_ID: + /* UnRegister all available callbacks */ + hramecc->MspDeInitCallback = NULL; + hramecc->MspInitCallback = NULL; + break; + + default : + /* Update the error code */ + hramecc->ErrorCode |= HAL_RAMECC_ERROR_INVALID_CALLBACK; + + /* Update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code and return error */ + hramecc->ErrorCode = HAL_RAMECC_ERROR_INVALID_CALLBACK; + status = HAL_ERROR; + } + + return status; +} +/** + * @} + */ +#endif /* USE_HAL_RAMECC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup RAMECC_Exported_Functions_Group4 + * +@verbatim + =============================================================================== + ##### Error information functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get failing address. + (+) Get failing data low. + (+) Get failing data high. + (+) Get hamming bits injected. + (+) Check single error flag. + (+) Check double error flag. + +@endverbatim + * @{ + */ + +/** + * @brief Return the RAMECC failing address. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval Failing address offset. + */ +uint32_t HAL_RAMECC_GetFailingAddress(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return failing address */ + return hramecc->Instance->FAR; +} + + +/** + * @brief Return the RAMECC data low. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval Failing data low. + */ +uint32_t HAL_RAMECC_GetFailingDataLow(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return failing data low */ + return hramecc->Instance->FDRL; +} + + +/** + * @brief Return the RAMECC data high. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval Failing data high. + */ +uint32_t HAL_RAMECC_GetFailingDataHigh(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return failing data high */ + return hramecc->Instance->FDRH; +} + + +/** + * @brief Return the RAMECC Hamming bits injected. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval Hamming bits injected. + */ +uint32_t HAL_RAMECC_GetHammingErrorCode(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return hamming bits injected */ + return hramecc->Instance->FECR; +} + +/** + * @brief Check if an ECC single error was occurred. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval State of bit (1 or 0). + */ +uint32_t HAL_RAMECC_IsECCSingleErrorDetected(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return the state of SEDC flag */ + return ((READ_BIT(hramecc->Instance->SR, RAMECC_SR_SEDCF) == (RAMECC_SR_SEDCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if an ECC double error was occurred. + * @param hramecc Pointer to a RAMECC_HandleTypeDef structure that contains + * the configuration information for the specified RAMECC + * Monitor. + * @retval State of bit (1 or 0). + */ +uint32_t HAL_RAMECC_IsECCDoubleErrorDetected(const RAMECC_HandleTypeDef *hramecc) +{ + /* Check the parameters */ + assert_param(IS_RAMECC_MONITOR_ALL_INSTANCE(hramecc->Instance)); + + /* Return the state of DEDF | DEBWDF flags */ + return ((READ_BIT(hramecc->Instance->SR, (RAMECC_SR_DEDF | RAMECC_SR_DEBWDF)) != 0U) ? 1UL : 0UL); +} +/** + * @} + */ + + +/** @addtogroup RAMECC_Exported_Functions_Group5 + * +@verbatim + =============================================================================== + ##### State and Error Functions ##### + =============================================================================== + [..] + This section provides functions allowing to check and get the RAMECC state + and the error code . + [..] + The HAL_RAMECC_GetState() function allows to get the RAMECC peripheral + state. + The HAL_RAMECC_GetError() function allows to Get the RAMECC peripheral error + code. + +@endverbatim + * @{ + */ + +/** + * @brief Get the RAMECC peripheral state. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC instance. + * @retval RAMECC state. + */ +HAL_RAMECC_StateTypeDef HAL_RAMECC_GetState(const RAMECC_HandleTypeDef *hramecc) +{ + /* Return the RAMECC state */ + return hramecc->State; +} + +/** + * @brief Get the RAMECC peripheral error code. + * @param hramecc : Pointer to a RAMECC_HandleTypeDef structure that + * contains the configuration information for the + * specified RAMECC instance. + * @retval RAMECC error code. + */ +uint32_t HAL_RAMECC_GetError(const RAMECC_HandleTypeDef *hramecc) +{ + /* Return the RAMECC error code */ + return hramecc->ErrorCode; +} +/** + * @} + */ +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc.c new file mode 100644 index 000000000..a258fad82 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc.c @@ -0,0 +1,2320 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 64MHz) with Flash 0 wait state,and all peripherals are off except + internal SRAM, Flash, JTAG and PWR + (+) There is no pre-scaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analogue mode , except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses pre-scalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock kernel source(s) for peripherals which clocks are not + derived from the System clock through :RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R + and RCC_D3CCIPR registers + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle + after the clock enable bit is set on the hardware register + (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle + after the clock enable bit is set on the hardware register + + [..] + Implemented Workaround: + (+) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define RCC_CSI_TIMEOUT_VALUE 1U /* 1 ms */ +#define RCC_HSI_TIMEOUT_VALUE 1U /* 1 ms */ +#define RCC_HSI48_TIMEOUT_VALUE 1U /* 1 ms */ +#define RCC_HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define RCC_LSI_TIMEOUT_VALUE 1U /* 1 ms */ +#define RCC_CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ +#define RCC_PLL_FRAC_WAIT_VALUE 1U /* PLL Fractional part waiting time before new latch enable : 1 ms */ +#define RCC_PLL_INPUTRANGE0_FREQMAX 2000000U /* 2 MHz is maximum frequency for VCO input range 0 */ +#define RCC_PLL_INPUTRANGE1_FREQMAX 4000000U /* 4 MHz is maximum frequency for VCO input range 1 */ +#define RCC_PLL_INPUTRANGE2_FREQMAX 8000000U /* 8 MHz is maximum frequency for VCO input range 2 */ + +#define RCC_PLL1_CONFIG 0U +#define RCC_PLL2_CONFIG 1U +#define RCC_PLL3_CONFIG 2U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define RCC_GET_MCO_GPIO_PIN(__RCC_MCOx__) ((__RCC_MCOx__) & GPIO_PIN_MASK) + +#define RCC_GET_MCO_GPIO_AF(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOAF_MASK) >> RCC_MCO_GPIOAF_POS) + +#define RCC_GET_MCO_GPIO_INDEX(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOPORT_MASK) >> RCC_MCO_GPIOPORT_POS) + +#define RCC_GET_MCO_GPIO_PORT(__RCC_MCOx__) (GPIOA_BASE + ((0x00000400UL) * RCC_GET_MCO_GPIO_INDEX((__RCC_MCOx__)))) + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables Private Variables + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_Private_Functions RCC Private Functions + * @{ + */ +static uint32_t RCC_PLL1_GetVCOOutputFreq(void); +static uint32_t RCC_PLL2_GetVCOOutputFreq(void); +static uint32_t RCC_PLL3_GetVCOOutputFreq(void); +static HAL_StatusTypeDef RCC_PLL_Config(uint32_t PLLnumber, const RCC_PLLInitTypeDef *pPLLInit); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE,CSI, LSI,HSI48, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB3, AHB1 + AHB2,AHB4,APB3, APB1L, APB1H, APB2, and APB4). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 64 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) CSI is a low-power RC oscillator which can be used directly as system clock, peripheral + clock, or PLL input.But even with frequency calibration, is less accurate than an + external crystal oscillator or ceramic resonator. + (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL , The RCC features three independent PLLs (clocked by HSI , HSE or CSI), + featuring three different output clocks and able to work either in integer or Fractional mode. + (++) A main PLL, PLL1, which is generally used to provide clocks to the CPU + and to some peripherals. + (++) Two dedicated PLLs, PLL2 and PLL3, which are used to generate the kernel clock for peripherals. + + + (#) CSS (Clock security system), once enabled and if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M NMI (Non-Mask-able Interrupt) + exception vector. + + (#) MCO1 (micro controller clock output), used to output HSI, LSE, HSE, PLL1(PLL1_Q) + or HSI48 clock (through a configurable pre-scaler) on PA8 pin. + + (#) MCO2 (micro controller clock output), used to output HSE, PLL2(PLL2_P), SYSCLK, + LSI, CSI, or PLL1(PLL1_P) clock (through a configurable pre-scaler) on PC9 pin. + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): CSI,HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System core clock through configurable + pre-scaler and used to clock the CPU, memory and peripherals mapped + on AHB and APB bus of the 3 Domains (D1, D2, D3)* through configurable pre-scalers + and used to clock the peripherals mapped on these buses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve system clock frequency. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except those + with dual clock domain where kernel source clock could be selected through + RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R and RCC_D3CCIPR registers. + + (*) : 2 Domains (CD and SRD) for stm32h7a3xx and stm32h7b3xx family lines. +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL1, PLL2 and PLL3 OFF + * - AHB, APB Bus pre-scaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @note In case the FMC or XSPI clock protection have been set, it must be disabled + * prior to calling this API. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + SET_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM_6); + + if (HAL_RCC_GetHCLKFreq() > HSI_VALUE) + { + /* Reset CFGR register (HSI is selected as system clock source) */ + CLEAR_REG(RCC->CFGR); + + /* Update the SystemCoreClock and SystemD2Clock global variables */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reduce flash latency */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_1); + } + else + { + /* Increase flash latency */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_1); + + /* Reset CFGR register (HSI is selected as system clock source) */ + CLEAR_REG(RCC->CFGR); + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CSION, CSIKERON, HSEON, HSI48ON, HSECSSON, HSIDIV bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSIKERON | RCC_CR_HSIDIV | RCC_CR_CSION | RCC_CR_CSIKERON \ + | RCC_CR_HSI48ON | RCC_CR_HSECSSON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL1RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); + + /* Wait till PLL2 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL3 bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); + + /* Wait till PLL3 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset CDCFGR register */ + CLEAR_REG(RCC->CDCFGR); + + /* Reset BMCFGR register */ + CLEAR_REG(RCC->BMCFGR); + + /* Reset APBCFGR register */ + CLEAR_REG(RCC->APBCFGR); + + /* Reset PLLCKSELR register to default value */ + WRITE_REG(RCC->PLLCKSELR, 0x02020200U); + + /* Reset PLLCFGR register */ + CLEAR_REG(RCC->PLLCFGR); + + /* Reset PLL1DIVR1 register to default value */ + WRITE_REG(RCC->PLL1DIVR1, 0x01010280U); + + /* Reset PLL1DIVR2 register to default value */ + WRITE_REG(RCC->PLL1DIVR2, 0x00000101U); + + /* Reset PLL1FRACR register */ + CLEAR_REG(RCC->PLL1FRACR); + + /* Reset PLL2DIVR1 register to default value */ + WRITE_REG(RCC->PLL2DIVR1, 0x01010280U); + + /* Reset PLL2DIVR2 register to default value */ + WRITE_REG(RCC->PLL2DIVR2, 0x00000101U); + + /* Reset PLL2FRACR register */ + CLEAR_REG(RCC->PLL2FRACR); + + /* Reset PLL3DIVR1 register to default value */ + WRITE_REG(RCC->PLL3DIVR1, 0x01010280U); + + /* Reset PLL3DIVR2 register to default value */ + WRITE_REG(RCC->PLL3DIVR2, 0x00000101U); + + /* Reset PLL3FRACR register */ + CLEAR_REG(RCC->PLL3FRACR); + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupts flags */ + WRITE_REG(RCC->CICR, 0xFFFFFFFFU); + + /* Reset all RSR flags */ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t sysclksrc; + uint32_t pllsrc; + uint32_t pllrdy; + uint32_t tmpreg1; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + pllsrc = __HAL_RCC_GET_PLL_OSCSOURCE(); + pllrdy = RCC->CR & (RCC_CR_PLL1RDY | RCC_CR_PLL2RDY | RCC_CR_PLL3RDY); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ + if ((sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE) || + ((pllrdy != 0U) && (pllsrc == RCC_PLLSOURCE_HSE))) + { + if (RCC_OscInitStruct->HSEState == RCC_HSE_OFF) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Wait till HSE is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSICALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL1 source when PLL1 is selected as system clock */ + if ((sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI) || + ((pllrdy != 0U) && (pllsrc == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not be disabled */ + if (RCC_OscInitStruct->HSIState == RCC_HSI_OFF) + { + return HAL_ERROR; + } + /* Otherwise, calibration is allowed, divider update also unless used for any enabled PLL */ + else + { + /* HSI must not be used as reference clock for any enabled PLL clock source */ + tmpreg1 = (RCC->CR & RCC_CR_HSIDIV); + if ((pllsrc == RCC_PLLSOURCE_HSI) && (pllrdy != 0U) && \ + (tmpreg1 != RCC_OscInitStruct->HSIDiv)) + { + return HAL_ERROR; + } + + assert_param(IS_RCC_HSIDIV(RCC_OscInitStruct->HSIDiv)); + + /* Set the Internal High Speed oscillator new divider */ + __HAL_RCC_HSI_CONFIG(RCC_HSI_ON | RCC_OscInitStruct->HSIDiv); + + if (sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI) + { + SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos))); + } + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + } + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState | RCC_OscInitStruct->HSIDiv); + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- CSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) + { + /* Check the parameters */ + assert_param(IS_RCC_CSI(RCC_OscInitStruct->CSIState)); + + /* When the CSI is used as system clock it will not disabled */ + if ((sysclksrc == RCC_SYSCLKSOURCE_STATUS_CSI) || + ((pllrdy != 0U) && (pllsrc == RCC_PLLSOURCE_CSI))) + { + /* When CSI is used as system clock it will not disabled */ + if (RCC_OscInitStruct->CSIState == RCC_CSI_OFF) + { + return HAL_ERROR; + } + } + else + { + /* Check the CSI State */ + if ((RCC_OscInitStruct->CSIState) != RCC_CSI_OFF) + { + /* Enable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_CSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if ((RCC_OscInitStruct->LSIState) != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------ HSI48 Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the HSI48 State */ + if ((RCC_OscInitStruct->HSI48State) != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Enable write access to Backup domain */ + PWR->CR1 |= PWR_CR1_DBP; + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if ((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*-------------------------------- PLL1 Configuration ----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL1.PLLState)); + + if (RCC_OscInitStruct->PLL1.PLLState != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) + { + /* No PLL off possible */ + if (RCC_OscInitStruct->PLL1.PLLState == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Check if only fractional part needs to be updated */ + tmpreg1 = ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN) >> RCC_PLL1FRACR_FRACN_Pos); + + if (RCC_OscInitStruct->PLL1.PLLFractional != tmpreg1) + { + assert_param(IS_RCC_PLLFRACN_VALUE(RCC_OscInitStruct->PLL1.PLLFractional)); + + /* Disable PLL1FRACLE */ + __HAL_RCC_PLL1_FRACN_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait at least 2 CK_REF (PLL input source divided by M) period to make sure next latched value will be taken into account. */ + while ((HAL_GetTick() - tickstart) < RCC_PLL_FRAC_WAIT_VALUE) + { + /* Do nothing */ + } + + /* Configure PLL1FRACN */ + __HAL_RCC_PLL1_FRACN_CONFIG(RCC_OscInitStruct->PLL1.PLLFractional); + + /* Enable PLL1FRACLE to latch new value . */ + __HAL_RCC_PLL1_FRACN_ENABLE(); + } + } + } + else + { + /* Initialize PLL1T to 1 to use common PLL initialization function */ + RCC_OscInitStruct->PLL1.PLLT = 1U; + if (RCC_PLL_Config(RCC_PLL1_CONFIG, &(RCC_OscInitStruct->PLL1)) != HAL_OK) + { + return HAL_ERROR; + } + } + } + + /*-------------------------------- PLL2 Configuration ----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL2.PLLState)); + + if (RCC_OscInitStruct->PLL2.PLLState != RCC_PLL_NONE) + { + if (RCC_PLL_Config(RCC_PLL2_CONFIG, &(RCC_OscInitStruct->PLL2)) != HAL_OK) + { + return HAL_ERROR; + } + } + + /*-------------------------------- PLL3 Configuration ----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL3.PLLState)); + + if (RCC_OscInitStruct->PLL3.PLLState != RCC_PLL_NONE) + { + /* Initialize PLL3T to 1 to use common PLL initialization function */ + RCC_OscInitStruct->PLL3.PLLT = 1U; + if (RCC_PLL_Config(RCC_PLL3_CONFIG, &(RCC_OscInitStruct->PLL3)) != HAL_OK) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency: FLASH Latency, this parameter depend on device selected + * + * @note The SystemCoreClock CMSIS variable is used to store System Core Clock Frequency + * and updated by HAL_InitTick() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @note Depending on the device voltage range, the software has to set correctly + * D1CPRE[3:0] bits to ensure that Domain1 core clock not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(const RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + HAL_StatusTypeDef halstatus; + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + + } + + /* Increasing the BUS frequency divider ? */ + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + if ((RCC_ClkInitStruct->APB1CLKDivider) > (RCC->APBCFGR & RCC_APBCFGR_PPRE1)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + if ((RCC_ClkInitStruct->APB2CLKDivider) > (RCC->APBCFGR & RCC_APBCFGR_PPRE2)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } + } + + /*-------------------------- PCLK4 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK4) == RCC_CLOCKTYPE_PCLK4) + { + assert_param(IS_RCC_PCLK4(RCC_ClkInitStruct->APB4CLKDivider)); + if ((RCC_ClkInitStruct->APB4CLKDivider) > (RCC->APBCFGR & RCC_APBCFGR_PPRE4)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE4, (RCC_ClkInitStruct->APB4CLKDivider)); + } + } + + /*-------------------------- PCLK5 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK5) == RCC_CLOCKTYPE_PCLK5) + { + assert_param(IS_RCC_PCLK5(RCC_ClkInitStruct->APB5CLKDivider)); + if ((RCC_ClkInitStruct->APB5CLKDivider) > (RCC->APBCFGR & RCC_APBCFGR_PPRE5)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE5, (RCC_ClkInitStruct->APB5CLKDivider)); + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + if ((RCC_ClkInitStruct->AHBCLKDivider) > (RCC->BMCFGR & RCC_BMCFGR_BMPRE)) + { + /* Set the new HCLK clock divider */ + MODIFY_REG(RCC->BMCFGR, RCC_BMCFGR_BMPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /*------------------------- SYSCLK Configuration -------------------------*/ + if ((RCC_ClkInitStruct->ClockType & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + assert_param(IS_RCC_SYSCLK(RCC_ClkInitStruct->SYSCLKDivider)); + MODIFY_REG(RCC->CDCFGR, RCC_CDCFGR_CPRE, RCC_ClkInitStruct->SYSCLKDivider); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == 0U) + { + return HAL_ERROR; + } + } + /* CSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_CSI) + { + /* Check the PLL ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > RCC_CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the BUS frequency divider ? */ + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + if ((RCC_ClkInitStruct->AHBCLKDivider) < (RCC->BMCFGR & RCC_BMCFGR_BMPRE)) + { + /* Set the new HCLK clock divider */ + MODIFY_REG(RCC->BMCFGR, RCC_BMCFGR_BMPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + if ((RCC_ClkInitStruct->APB1CLKDivider) < (RCC->APBCFGR & RCC_APBCFGR_PPRE1)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + if ((RCC_ClkInitStruct->APB2CLKDivider) < (RCC->APBCFGR & RCC_APBCFGR_PPRE2)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } + } + + /*-------------------------- PCLK4 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK4) == RCC_CLOCKTYPE_PCLK4) + { + assert_param(IS_RCC_PCLK4(RCC_ClkInitStruct->APB4CLKDivider)); + if ((RCC_ClkInitStruct->APB4CLKDivider) < (RCC->APBCFGR & RCC_APBCFGR_PPRE4)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE4, (RCC_ClkInitStruct->APB4CLKDivider)); + } + } + + /*-------------------------- PCLK5 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK5) == RCC_CLOCKTYPE_PCLK5) + { + assert_param(IS_RCC_PCLK5(RCC_ClkInitStruct->APB5CLKDivider)); + if ((RCC_ClkInitStruct->APB5CLKDivider) < (RCC->APBCFGR & RCC_APBCFGR_PPRE5)) + { + MODIFY_REG(RCC->APBCFGR, RCC_APBCFGR_PPRE5, (RCC_ClkInitStruct->APB5CLKDivider)); + } + } + + /* Update the SystemCoreClock global variable with the System CPU clock */ + SystemCoreClock = HAL_RCC_GetSysClockFreq(); + + /* Configure the source of time base considering new system clocks settings*/ + halstatus = HAL_InitTick(uwTickPrio); + + return halstatus; +} + +/** + * @} + */ + +/** @defgroup RCC_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). + * @note PA8/PC9 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1_PA8 Clock source to output on MCO1 pin(PA8). + * @arg RCC_MCO2_PC9 Clock source to output on MCO2 pin(PC9). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLL1Q: PLL1Q clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSI48 HSI48 (48MHZ) selected as MCO1 source + * @arg RCC_MCO2SOURCE_SYSCLK System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL2PCLK PLL2P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL1P PLL1P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_CSI CSI clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @param RCC_MCODiv: specifies the MCOx pre-scaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCOx clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ +#if defined(HAL_GPIO_MODULE_ENABLED) + GPIO_InitTypeDef GPIO_InitStruct; + uint32_t mcoindex; + uint32_t mco_gpio_index; + GPIO_TypeDef *mco_gpio_port; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + + /* Common GPIO init parameters */ + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + + /* Get MCOx selection */ + mcoindex = RCC_MCOx & RCC_MCO_INDEX_MASK; + + /* Get MCOx GPIO Port */ + mco_gpio_port = (GPIO_TypeDef *) RCC_GET_MCO_GPIO_PORT(RCC_MCOx); + + /* MCOx Clock Enable */ + mco_gpio_index = RCC_GET_MCO_GPIO_INDEX(RCC_MCOx); + SET_BIT(RCC->AHB4ENR, (1UL << mco_gpio_index)); + + /* Configure the MCOx pin in alternate function mode */ + GPIO_InitStruct.Pin = RCC_GET_MCO_GPIO_PIN(RCC_MCOx); + GPIO_InitStruct.Alternate = RCC_GET_MCO_GPIO_AF(RCC_MCOx); + HAL_GPIO_Init(mco_gpio_port, &GPIO_InitStruct); + + if (mcoindex == RCC_MCO1_INDEX) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1SEL | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); + } + else if (mcoindex == RCC_MCO2_INDEX) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 7))); + } + else + { + /* Do nothing */ + } + +#endif /* HAL_GPIO_MODULE_ENABLED */ +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M NMI (Non-Mask-able Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSECSSON); +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSECSSON); +} + +/** + * @brief Returns the SYSCLK frequency + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is CSI, function returns values based on CSI_VALUE(*) + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * @note (*) CSI_VALUE is a constant defined in stm32h7rsxx_hal_conf.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSI_VALUE is a constant defined in stm32h7rsxx_hal_conf.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in stm32h7rsxx_hal_conf.h file (default value + * 24 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue; + float_t fracn1, pllvco; + uint32_t sysclockfreq, prescaler; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + sysclockfreq = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + sysclockfreq = 0U; + } + + break; + + case RCC_SYSCLKSOURCE_STATUS_CSI: /* CSI used as system clock source */ + sysclockfreq = CSI_VALUE; + break; + + case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + break; + + case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos) ; + pllfracen = ((RCC-> PLLCFGR & RCC_PLLCFGR_PLL1FRACEN) >> RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN) >> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + /* Can't retrieve HSIDIV value */ + pllvco = (float_t)0; + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + pllp = (((RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVP) >> RCC_PLL1DIVR1_DIVP_Pos) + 1U) ; + sysclockfreq = (uint32_t)(float_t)(pllvco / (float_t)pllp); + } + else + { + sysclockfreq = 0U; + } + break; + + default: + sysclockfreq = CSI_VALUE; + break; + } + + prescaler = RCC->CDCFGR & RCC_CDCFGR_CPRE; + if (prescaler >= 8U) + { + sysclockfreq = sysclockfreq >> (prescaler - RCC_CDCFGR_CPRE_3 + 1U); + } + + return sysclockfreq; +} + + +/** + * @brief Return the HCLK frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + uint32_t clock, prescaler; + const uint8_t AHBPrescTable[8] = {1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; + + /* SysClk */ + clock = HAL_RCC_GetSysClockFreq(); + /* Bus matrix divider */ + prescaler = (RCC->BMCFGR & RCC_BMCFGR_BMPRE) >> RCC_BMCFGR_BMPRE_Pos; + if (prescaler >= 8U) + { + clock = clock >> AHBPrescTable[prescaler - 8U]; + } + return (clock); +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + uint32_t clock, prescaler; + /* Get HCLK source and compute PCLK1 frequency ---------------------------*/ + clock = HAL_RCC_GetHCLKFreq(); + /* APB1 prescaler */ + prescaler = (RCC->APBCFGR & RCC_APBCFGR_PPRE1) >> RCC_APBCFGR_PPRE1_Pos; + if (prescaler >= 4U) + { + clock = clock >> (prescaler - 3U); + } + return (clock); +} + +/** + * @brief Return the PCLK2 frequency. + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + uint32_t clock, prescaler; + /* Get HCLK source and compute PCLK2 frequency ---------------------------*/ + clock = HAL_RCC_GetHCLKFreq(); + /* APB2 prescaler */ + prescaler = (RCC->APBCFGR & RCC_APBCFGR_PPRE2) >> RCC_APBCFGR_PPRE2_Pos; + if (prescaler >= 4U) + { + clock = clock >> (prescaler - 3U); + } + return (clock); +} + +/** + * @brief Return the PCLK4 frequency. + * @note Each time PCLK4 changes, this function must be called to update the + * right PCLK4 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK4 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK4Freq(void) +{ + uint32_t clock, prescaler; + /* Get HCLK source and compute PCLK4 frequency ---------------------------*/ + clock = HAL_RCC_GetHCLKFreq(); + /* APB4 prescaler */ + prescaler = (RCC->APBCFGR & RCC_APBCFGR_PPRE4) >> RCC_APBCFGR_PPRE4_Pos; + if (prescaler >= 4U) + { + clock = clock >> (prescaler - 3U); + } + return (clock); +} + +/** + * @brief Return the PCLK5 frequency. + * @note Each time PCLK5 changes, this function must be called to update the + * right PCLK5 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK5 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK5Freq(void) +{ + uint32_t clock, prescaler; + /* Get HCLK source and compute PCLK5 frequency ---------------------------*/ + clock = HAL_RCC_GetHCLKFreq(); + /* APB5 prescaler */ + prescaler = (RCC->APBCFGR & RCC_APBCFGR_PPRE5) >> RCC_APBCFGR_PPRE5_Pos; + if (prescaler >= 4U) + { + clock = clock >> (prescaler - 3U); + } + return (clock); +} + +/** + * @brief Return the PLL1P frequency. + * @retval PLL1P frequency in Hz + */ +uint32_t HAL_RCC_GetPLL1PFreq(void) +{ + uint32_t pllp; + + /* PLL1P divider */ + pllp = ((RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVP) >> RCC_PLL1DIVR1_DIVP_Pos) + 1U; + + /* Compute VCO output frequency and return PLL1P one */ + return ((uint32_t)RCC_PLL1_GetVCOOutputFreq() / pllp); +} + +/** + * @brief Return the PLL1Q frequency. + * @retval PLL1Q frequency in Hz + */ +uint32_t HAL_RCC_GetPLL1QFreq(void) +{ + uint32_t pllq; + + /* PLL1Q divider */ + pllq = ((RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVQ) >> RCC_PLL1DIVR1_DIVQ_Pos) + 1U; + + /* Compute VCO output frequency and return PLL1Q one */ + return ((uint32_t)RCC_PLL1_GetVCOOutputFreq() / pllq); +} + +/** + * @brief Return the PLL1R frequency. + * @retval PLL1R frequency in Hz + */ +uint32_t HAL_RCC_GetPLL1RFreq(void) +{ + uint32_t pllr; + + /* PLL1R divider */ + pllr = ((RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVR) >> RCC_PLL1DIVR1_DIVR_Pos) + 1U; + + /* Compute VCO output frequency and return PLL1R one */ + return ((uint32_t)RCC_PLL1_GetVCOOutputFreq() / pllr); +} + +/** + * @brief Return the PLL1S frequency. + * @retval PLL1S frequency in Hz + */ +uint32_t HAL_RCC_GetPLL1SFreq(void) +{ + uint32_t plls; + + /* PLL1S divider */ + plls = ((RCC->PLL1DIVR2 & RCC_PLL1DIVR2_DIVS) >> RCC_PLL1DIVR2_DIVS_Pos) + 1U; + + /* Compute VCO output frequency and return PLL1S one */ + return ((uint32_t)RCC_PLL1_GetVCOOutputFreq() / plls); +} + +/** + * @brief Return the PLL2P frequency. + * @retval PLL2P frequency in Hz + */ +uint32_t HAL_RCC_GetPLL2PFreq(void) +{ + uint32_t pllp; + + /* PLL2P divider */ + pllp = ((RCC->PLL2DIVR1 & RCC_PLL2DIVR1_DIVP) >> RCC_PLL2DIVR1_DIVP_Pos) + 1U; + + /* Compute VCO output frequency and return PLL2P one */ + return ((uint32_t)RCC_PLL2_GetVCOOutputFreq() / pllp); +} + +/** + * @brief Return the PLL2Q frequency. + * @retval PLL2Q frequency in Hz + */ +uint32_t HAL_RCC_GetPLL2QFreq(void) +{ + uint32_t pllq; + + /* PLL2Q divider */ + pllq = ((RCC->PLL2DIVR1 & RCC_PLL2DIVR1_DIVQ) >> RCC_PLL2DIVR1_DIVQ_Pos) + 1U; + + /* Compute VCO output frequency and return PLL2Q one */ + return ((uint32_t)RCC_PLL2_GetVCOOutputFreq() / pllq); +} + +/** + * @brief Return the PLL2R frequency. + * @retval PLL2R frequency in Hz + */ +uint32_t HAL_RCC_GetPLL2RFreq(void) +{ + uint32_t pllr; + + /* PLL2R divider */ + pllr = ((RCC->PLL2DIVR1 & RCC_PLL2DIVR1_DIVR) >> RCC_PLL2DIVR1_DIVR_Pos) + 1U; + + /* Compute VCO output frequency and return PLL2R one */ + return ((uint32_t)RCC_PLL2_GetVCOOutputFreq() / pllr); +} + +/** + * @brief Return the PLL2S frequency. + * @retval PLL2S frequency in Hz + */ +uint32_t HAL_RCC_GetPLL2SFreq(void) +{ + uint32_t plls; + + /* PLL2S divider */ + plls = ((RCC->PLL2DIVR2 & RCC_PLL2DIVR2_DIVS) >> RCC_PLL2DIVR2_DIVS_Pos) + 1U; + + /* Compute VCO output frequency and return PLL2R one */ + return ((uint32_t)RCC_PLL2_GetVCOOutputFreq() / plls); +} + +/** + * @brief Return the PLL2T frequency. + * @retval PLL2T frequency in Hz + */ +uint32_t HAL_RCC_GetPLL2TFreq(void) +{ + uint32_t pllt; + + /* PLL2T divider */ + pllt = ((RCC->PLL2DIVR2 & RCC_PLL2DIVR2_DIVT) >> RCC_PLL2DIVR2_DIVT_Pos) + 1U; + + /* Compute VCO output frequency and return PLL2T one */ + return ((uint32_t)RCC_PLL2_GetVCOOutputFreq() / pllt); +} + +/** + * @brief Return the PLL3P frequency. + * @retval PLL3P frequency in Hz + */ +uint32_t HAL_RCC_GetPLL3PFreq(void) +{ + uint32_t pllp; + + /* PLL3P divider */ + pllp = ((RCC->PLL3DIVR1 & RCC_PLL3DIVR1_DIVP) >> RCC_PLL3DIVR1_DIVP_Pos) + 1U; + + /* Compute VCO output frequency and return PLL3P one */ + return ((uint32_t)RCC_PLL3_GetVCOOutputFreq() / pllp); +} + +/** + * @brief Return the PLL3Q frequency. + * @retval PLL3Q frequency in Hz + */ +uint32_t HAL_RCC_GetPLL3QFreq(void) +{ + uint32_t pllq; + + /* PLL3Q divider */ + pllq = ((RCC->PLL3DIVR1 & RCC_PLL3DIVR1_DIVQ) >> RCC_PLL3DIVR1_DIVQ_Pos) + 1U; + + /* Compute VCO output frequency and return PLL3Q one */ + return ((uint32_t)RCC_PLL3_GetVCOOutputFreq() / pllq); +} + +/** + * @brief Return the PLL3R frequency. + * @retval PLL3R frequency in Hz + */ +uint32_t HAL_RCC_GetPLL3RFreq(void) +{ + uint32_t pllr; + + /* PLL3R divider */ + pllr = ((RCC->PLL3DIVR1 & RCC_PLL3DIVR1_DIVR) >> RCC_PLL3DIVR1_DIVR_Pos) + 1U; + + /* Compute VCO output frequency and return PLL3R one */ + return ((uint32_t)RCC_PLL3_GetVCOOutputFreq() / pllr); +} + +/** + * @brief Return the PLL3S frequency. + * @retval PLL3S frequency in Hz + */ +uint32_t HAL_RCC_GetPLL3SFreq(void) +{ + uint32_t plls; + + /* PLL3S divider */ + plls = ((RCC->PLL3DIVR2 & RCC_PLL3DIVR2_DIVS) >> RCC_PLL3DIVR2_DIVS_Pos) + 1U; + + /* Compute VCO output frequency and return PLL3S one */ + return ((uint32_t)RCC_PLL3_GetVCOOutputFreq() / plls); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + + uint32_t regvalue; + uint32_t mask; + + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_CSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; + + /* Get Backup Domain register */ + regvalue = RCC->BDCR; + + /* Get the LSE configuration -----------------------------------------------*/ + mask = (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT | RCC_BDCR_LSEON); + RCC_OscInitStruct->LSEState = (regvalue & mask); + + /* Get RCC clock control and status register */ + regvalue = RCC->CSR; + + /* Get the LSI configuration -----------------------------------------------*/ + mask = RCC_CSR_LSION; + RCC_OscInitStruct->LSIState = (regvalue & mask); + + /* Get Control register */ + regvalue = RCC->CR; + + /* Get the HSE configuration -----------------------------------------------*/ + mask = (RCC_CR_HSEBYP | RCC_CR_HSEEXT | RCC_CR_HSEON); + RCC_OscInitStruct->HSEState = (regvalue & mask); + + /* Get the HSI configuration -----------------------------------------------*/ + mask = RCC_CR_HSION; + RCC_OscInitStruct->HSIState = (regvalue & mask); + RCC_OscInitStruct->HSIDiv = (regvalue & RCC_CR_HSIDIV); + RCC_OscInitStruct->HSICalibrationValue = ((RCC->HSICFGR & RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); + + /* Get the HSI48 configuration ---------------------------------------------*/ + mask = RCC_CR_HSI48ON; + RCC_OscInitStruct->HSI48State = (regvalue & mask); + + /* Get the CSI configuration -----------------------------------------------*/ + mask = RCC_CR_CSION; + RCC_OscInitStruct->CSIState = (regvalue & mask); + + /* Get the PLL1 configuration -----------------------------------------------*/ + if ((regvalue & RCC_CR_PLL1ON) == RCC_CR_PLL1ON) + { + RCC_OscInitStruct->PLL1.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL1.PLLState = RCC_PLL_OFF; + } + + /* Get PLL1 configuration register */ + regvalue = RCC->PLLCKSELR; + RCC_OscInitStruct->PLL1.PLLSource = (regvalue & RCC_PLLCKSELR_PLLSRC); + RCC_OscInitStruct->PLL1.PLLM = ((regvalue & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); + + /* Check if fractional part is enable */ + regvalue = RCC->PLLCFGR; + if ((regvalue & RCC_PLLCFGR_PLL1FRACEN) != 0x00u) + { + regvalue = (((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN) >> RCC_PLL1FRACR_FRACN_Pos)); + } + else + { + regvalue = 0; + } + RCC_OscInitStruct->PLL1.PLLFractional = regvalue; + + /* Get PLL1 dividers register */ + regvalue = RCC->PLL1DIVR1; + RCC_OscInitStruct->PLL1.PLLN = ((regvalue & RCC_PLL1DIVR1_DIVN) + 1U); + RCC_OscInitStruct->PLL1.PLLR = (((regvalue & RCC_PLL1DIVR1_DIVR) >> RCC_PLL1DIVR1_DIVR_Pos) + 1U); + RCC_OscInitStruct->PLL1.PLLP = (((regvalue & RCC_PLL1DIVR1_DIVP) >> RCC_PLL1DIVR1_DIVP_Pos) + 1U); + RCC_OscInitStruct->PLL1.PLLQ = (((regvalue & RCC_PLL1DIVR1_DIVQ) >> RCC_PLL1DIVR1_DIVQ_Pos) + 1U); + regvalue = RCC->PLL1DIVR2; + RCC_OscInitStruct->PLL1.PLLS = (((regvalue & RCC_PLL1DIVR2_DIVS) >> RCC_PLL1DIVR2_DIVS_Pos) + 1U); + RCC_OscInitStruct->PLL1.PLLT = 0; + + /* Get the PLL2 configuration -----------------------------------------------*/ + /* Get Control register */ + regvalue = RCC->CR; + if ((regvalue & RCC_CR_PLL2ON) == RCC_CR_PLL2ON) + { + RCC_OscInitStruct->PLL2.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL2.PLLState = RCC_PLL_OFF; + } + + /* Get PLL2 configuration register */ + regvalue = RCC->PLLCKSELR; + RCC_OscInitStruct->PLL2.PLLSource = (regvalue & RCC_PLLCKSELR_PLLSRC); + RCC_OscInitStruct->PLL2.PLLM = ((regvalue & RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); + + /* Check if fractional part is enable */ + regvalue = RCC->PLLCFGR; + if ((regvalue & RCC_PLLCFGR_PLL2FRACEN) != 0x00u) + { + regvalue = (((RCC->PLL2FRACR & RCC_PLL2FRACR_FRACN) >> RCC_PLL2FRACR_FRACN_Pos)); + } + else + { + regvalue = 0; + } + RCC_OscInitStruct->PLL2.PLLFractional = regvalue; + + /* Get PLL2 dividers register */ + regvalue = RCC->PLL2DIVR1; + RCC_OscInitStruct->PLL2.PLLN = ((regvalue & RCC_PLL2DIVR1_DIVN) + 1U); + RCC_OscInitStruct->PLL2.PLLR = (((regvalue & RCC_PLL2DIVR1_DIVR) >> RCC_PLL2DIVR1_DIVR_Pos) + 1U); + RCC_OscInitStruct->PLL2.PLLP = (((regvalue & RCC_PLL2DIVR1_DIVP) >> RCC_PLL2DIVR1_DIVP_Pos) + 1U); + RCC_OscInitStruct->PLL2.PLLQ = (((regvalue & RCC_PLL2DIVR1_DIVQ) >> RCC_PLL2DIVR1_DIVQ_Pos) + 1U); + regvalue = RCC->PLL2DIVR2; + RCC_OscInitStruct->PLL2.PLLS = (((regvalue & RCC_PLL2DIVR2_DIVS) >> RCC_PLL2DIVR2_DIVS_Pos) + 1U); + RCC_OscInitStruct->PLL2.PLLT = (((regvalue & RCC_PLL2DIVR2_DIVT) >> RCC_PLL2DIVR2_DIVT_Pos) + 1U); + + /* Get the PLL3 configuration -----------------------------------------------*/ + /* Get Control register */ + regvalue = RCC->CR; + if ((regvalue & RCC_CR_PLL3ON) == RCC_CR_PLL3ON) + { + RCC_OscInitStruct->PLL3.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL3.PLLState = RCC_PLL_OFF; + } + + /* Get PLL3 configuration register */ + regvalue = RCC->PLLCKSELR; + RCC_OscInitStruct->PLL3.PLLSource = (regvalue & RCC_PLLCKSELR_PLLSRC); + RCC_OscInitStruct->PLL3.PLLM = ((regvalue & RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); + + + /* Check if fractional part is enable */ + regvalue = RCC->PLLCFGR; + if ((regvalue & RCC_PLLCFGR_PLL3FRACEN) != 0x00u) + { + regvalue = (((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACN) >> RCC_PLL3FRACR_FRACN_Pos)); + } + else + { + regvalue = 0; + } + RCC_OscInitStruct->PLL3.PLLFractional = regvalue; + + /* Get PLL3 dividers register */ + regvalue = RCC->PLL3DIVR1; + RCC_OscInitStruct->PLL3.PLLN = ((regvalue & RCC_PLL3DIVR1_DIVN) + 1U); + RCC_OscInitStruct->PLL3.PLLR = (((regvalue & RCC_PLL3DIVR1_DIVR) >> RCC_PLL3DIVR1_DIVR_Pos) + 1U); + RCC_OscInitStruct->PLL3.PLLP = (((regvalue & RCC_PLL3DIVR1_DIVP) >> RCC_PLL3DIVR1_DIVP_Pos) + 1U); + RCC_OscInitStruct->PLL3.PLLQ = (((regvalue & RCC_PLL3DIVR1_DIVQ) >> RCC_PLL3DIVR1_DIVQ_Pos) + 1U); + regvalue = RCC->PLL3DIVR2; + RCC_OscInitStruct->PLL3.PLLS = (((regvalue & RCC_PLL3DIVR2_DIVS) >> RCC_PLL3DIVR2_DIVS_Pos) + 1U); + RCC_OscInitStruct->PLL3.PLLT = 0; + +} + +/** + * @brief Configures the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency: Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ + RCC_CLOCKTYPE_PCLK4 | RCC_CLOCKTYPE_PCLK5; + + /* Get the SYSCLK source ---------------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = READ_BIT(RCC->CFGR, RCC_CFGR_SW); + + /* Get the SYSCLK configuration---------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKDivider = READ_BIT(RCC->CDCFGR, RCC_CDCFGR_CPRE); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = READ_BIT(RCC->BMCFGR, RCC_BMCFGR_BMPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE2); + + /* Get the APB4 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB4CLKDivider = READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE4); + + /* Get the APB5 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB5CLKDivider = READ_BIT(RCC->APBCFGR, RCC_APBCFGR_PPRE5); + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_LATENCY(); +} + +/** + * @brief This function handles the RCC HSE CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC HSECSSF interrupt flag */ + if (__HAL_RCC_GET_IT(RCC_IT_HSECSS)) + { + /* Clear RCC HSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_HSECSS); + + /* RCC HSE Clock Security System interrupt user callback */ + HAL_RCC_HSECSSCallback(); + } +} + +/** + * @brief RCC HSE Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_HSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_HSECSSCallback could be implemented in the user file + */ +} + +/** + * @brief RCC LSE Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_LSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_LSECSSCallback could be implemented in the user file + */ +} + +/** + * @brief Get and clear reset flags + * @note Once reset flags are retrieved, this API is clearing them in order + * to isolate next reset reason. + * @retval can be a combination of @ref RCC_Reset_Flag + */ +uint32_t HAL_RCC_GetResetSource(void) +{ + uint32_t reset; + + /* Get all reset flags */ + reset = RCC->RSR & RCC_RESET_FLAG_ALL; + + /* Clear Reset flags */ + RCC->RSR |= RCC_RSR_RMVF; + + return reset; +} + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Configure the requested PLL + * @param PLLnumber PLL number to configure + * @param pPLLInit Pointer to an RCC_PLLInitTypeDef structure that + * contains the configuration parameters. + * @note PLL is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCC_PLL_Config(uint32_t PLLnumber, const RCC_PLLInitTypeDef *pPLLInit) +{ + __IO uint32_t *p_rcc_pll_divr1_reg; + __IO uint32_t *p_rcc_pll_divr2_reg; + __IO uint32_t *p_rcc_pll_fracr_reg; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t tickstart; + uint32_t pllsrc; + uint32_t pllvco; + + p_rcc_pll_divr1_reg = &(RCC->PLL1DIVR1) + (((uint32_t)0x02) * PLLnumber); + p_rcc_pll_divr2_reg = &(RCC->PLL1DIVR2) + (((uint32_t)0x01) * PLLnumber); + + /* Disable the post-dividers */ + CLEAR_BIT(RCC->PLLCFGR, (RCC_PLLCFGR_PLL1PEN | RCC_PLLCFGR_PLL1QEN | RCC_PLLCFGR_PLL1REN | RCC_PLLCFGR_PLL1SEN | + 0x00000200U) /* Hardcoded because no definition in CMSIS */ + << ((RCC_PLLCFGR_PLL2PEN_Pos - RCC_PLLCFGR_PLL1PEN_Pos)*PLLnumber)); + + /* Ensure PLLx is disabled */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON << ((RCC_CR_PLL2ON_Pos - RCC_CR_PLL1ON_Pos)*PLLnumber)); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLx is disabled */ + while (READ_BIT(RCC->CR, (RCC_CR_PLL1RDY << ((RCC_CR_PLL2RDY_Pos - RCC_CR_PLL1RDY_Pos)*PLLnumber))) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + if (pPLLInit->PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(pPLLInit->PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(pPLLInit->PLLM)); + assert_param(IS_RCC_PLLN_VALUE(pPLLInit->PLLN)); + assert_param(IS_RCC_PLLP_VALUE(pPLLInit->PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(pPLLInit->PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(pPLLInit->PLLR)); + assert_param(IS_RCC_PLLS_VALUE(pPLLInit->PLLS)); + assert_param(IS_RCC_PLLT_VALUE(pPLLInit->PLLT)); + + pllsrc = pPLLInit->PLLSource; + + /* Compute VCO input frequency and define range accordingly. First check clock source frequency */ + if (pllsrc == RCC_PLLSOURCE_HSI) + { + /* Clock source is HSI or HSI/HSIDIV */ + pllvco = HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + } + else if (pllsrc == RCC_PLLSOURCE_HSE) + { + /* Clock source is HSE */ + pllvco = HSE_VALUE; + } + else + { + /* Clock source is CSI */ + pllvco = CSI_VALUE; + } + + /* Compute VCO input frequency depending on M divider */ + pllvco = (pllvco / pPLLInit->PLLM); + assert_param(IS_RCC_PLL_VCOINPUTFREQ(pllvco)); + + if (pllvco >= RCC_PLL_INPUTRANGE2_FREQMAX) + { + pllvco = RCC_PLL_VCOINPUT_RANGE3 | RCC_PLL_VCO_HIGH; + } + else if (pllvco >= RCC_PLL_INPUTRANGE1_FREQMAX) + { + pllvco = RCC_PLL_VCOINPUT_RANGE2 | RCC_PLL_VCO_HIGH; + } + else if (pllvco >= RCC_PLL_INPUTRANGE0_FREQMAX) + { + pllvco = RCC_PLL_VCOINPUT_RANGE1 | RCC_PLL_VCO_HIGH; + } + else + { + pllvco = RCC_PLL_VCOINPUT_RANGE0 | RCC_PLL_VCO_LOW; + } + + pllvco = (pllvco << ((RCC_PLLCFGR_PLL2RGE_Pos - RCC_PLLCFGR_PLL1RGE_Pos) * PLLnumber)); + + /* Configure PLL source and PLLM divider */ + MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_PLLSRC | (RCC_PLLCKSELR_DIVM1 << ((RCC_PLLCKSELR_DIVM2_Pos - RCC_PLLCKSELR_DIVM1_Pos)*PLLnumber))), \ + pllsrc | (pPLLInit->PLLM << (RCC_PLLCKSELR_DIVM1_Pos + ((RCC_PLLCKSELR_DIVM2_Pos - RCC_PLLCKSELR_DIVM1_Pos)*PLLnumber)))); + + if ((RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC) != pllsrc) + { + /* There is another PLL activated with another source */ + return HAL_ERROR; + } + + /* Configure VCO input range, VCO selection and clear FRACEN */ + MODIFY_REG(RCC->PLLCFGR, (RCC_PLLCFGR_PLL1RGE | RCC_PLLCFGR_PLL1VCOSEL | RCC_PLLCFGR_PLL1FRACEN) << (((RCC_PLLCFGR_PLL2RGE_Pos - RCC_PLLCFGR_PLL1RGE_Pos)*PLLnumber)), \ + pllvco); + + /* Configure PLLN, PLLP, PLLQ, PLLR, PLLS and PLLT dividers */ + WRITE_REG(*p_rcc_pll_divr1_reg, ((pPLLInit->PLLN - 1U) | + ((pPLLInit->PLLP - 1U) << RCC_PLL1DIVR1_DIVP_Pos) | + ((pPLLInit->PLLQ - 1U) << RCC_PLL1DIVR1_DIVQ_Pos) | + ((pPLLInit->PLLR - 1U) << RCC_PLL1DIVR1_DIVR_Pos))); + WRITE_REG(*p_rcc_pll_divr2_reg, ((pPLLInit->PLLS - 1U) | + ((pPLLInit->PLLT - 1U) << RCC_PLL2DIVR2_DIVT_Pos))); + + if (PLLnumber == RCC_PLL1_CONFIG) + { + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1PEN); + } + + if (pPLLInit->PLLFractional != 0U) + { + assert_param(IS_RCC_PLLFRACN_VALUE(pPLLInit->PLLFractional)); + + p_rcc_pll_fracr_reg = &(RCC->PLL1FRACR) + (((uint32_t)0x02) * PLLnumber); + + /* Configure PLLFRACN */ + MODIFY_REG(*p_rcc_pll_fracr_reg, RCC_PLL1FRACR_FRACN, pPLLInit->PLLFractional << RCC_PLL1FRACR_FRACN_Pos); + + /* Enable PLLFRACLE */ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN << ((RCC_PLLCFGR_PLL2FRACEN_Pos - RCC_PLLCFGR_PLL1FRACEN_Pos)*PLLnumber)); + } + + /* Enable the PLLx */ + SET_BIT(RCC->CR, RCC_CR_PLL1ON << ((RCC_CR_PLL2ON_Pos - RCC_CR_PLL1ON_Pos)*PLLnumber)); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLx is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLL1RDY << ((RCC_CR_PLL2RDY_Pos - RCC_CR_PLL1RDY_Pos)*PLLnumber)) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable outputs to save power when PLLx is off */ + MODIFY_REG(RCC->PLLCKSELR, ((RCC_PLLCKSELR_DIVM1 << (RCC_PLLCKSELR_DIVM1_Pos + ((RCC_PLLCKSELR_DIVM2_Pos - RCC_PLLCKSELR_DIVM1_Pos)*PLLnumber))) + | RCC_PLLCKSELR_PLLSRC), RCC_PLLSOURCE_NONE); + } + + return ret; +} + +/** + * @brief Compute PLL1 VCO output frequency + * @retval Value of PLL1 VCO output frequency + */ +static uint32_t RCC_PLL1_GetVCOOutputFreq(void) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + uint32_t pllsrc; + uint32_t pllm; + uint32_t plln; + uint32_t pllfracn; + + /* Get PLL1 CFGR and DIVR register values */ + tmpreg1 = RCC->PLLCKSELR; + tmpreg2 = RCC->PLL1DIVR1; + + /* Retrieve PLL1 multiplication factor and divider */ + pllm = (tmpreg1 & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos; + plln = (tmpreg2 & RCC_PLL1DIVR1_DIVN) + 1U; + + if (pllm == 0U) + { + /* Prescaler disabled */ + return 0U; + } + + /* Check if fractional part is enable */ + if ((tmpreg1 & RCC_PLLCFGR_PLL1FRACEN) != 0U) + { + pllfracn = (RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN) >> RCC_PLL1FRACR_FRACN_Pos; + } + else + { + pllfracn = 0U; + } + + /* determine PLL source */ + switch (tmpreg1 & RCC_PLLCKSELR_PLLSRC) + { + /* HSI used as PLL1 clock source */ + case RCC_PLLSOURCE_HSI: + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + pllsrc = HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + } + else + { + /* Can't retrieve HSIDIV value */ + pllsrc = 0U; + } + break; + + /* HSE used as PLL1 clock source */ + case RCC_PLLSOURCE_HSE: + pllsrc = HSE_VALUE; + break; + + /* CSI used as PLL1 clock source */ + case RCC_PLLSOURCE_CSI: + pllsrc = CSI_VALUE; + break; + + default: + pllsrc = 0U; + break; + } + + /* Compute VCO output frequency */ + return ((pllsrc / pllm) * (plln + (pllfracn / 0x2000U))); +} + +/** + * @brief Compute PLL2 VCO output frequency + * @retval Value of PLL2 VCO output frequency + */ +static uint32_t RCC_PLL2_GetVCOOutputFreq(void) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + uint32_t pllsrc; + uint32_t pllm; + uint32_t plln; + uint32_t pllfracn; + + /* Get PLL2 CFGR and DIVR register values */ + tmpreg1 = RCC->PLLCKSELR; + tmpreg2 = RCC->PLL2DIVR1; + + /* Retrieve PLL2 multiplication factor and divider */ + pllm = (tmpreg1 & RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos; + plln = (tmpreg2 & RCC_PLL2DIVR1_DIVN) + 1U; + + if (pllm == 0U) + { + /* Prescaler disabled */ + return 0U; + } + + /* Check if fractional part is enable */ + if ((tmpreg1 & RCC_PLLCFGR_PLL2FRACEN) != 0U) + { + pllfracn = (RCC->PLL2FRACR & RCC_PLL2FRACR_FRACN) >> RCC_PLL2FRACR_FRACN_Pos; + } + else + { + pllfracn = 0U; + } + + /* determine PLL source */ + switch (tmpreg1 & RCC_PLLCKSELR_PLLSRC) + { + /* HSI used as PLL2 clock source */ + case RCC_PLLSOURCE_HSI: + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + pllsrc = HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + } + else + { + /* Can't retrieve HSIDIV value */ + pllsrc = 0U; + } + break; + + /* HSE used as PLL2 clock source */ + case RCC_PLLSOURCE_HSE: + pllsrc = HSE_VALUE; + break; + + /* CSI used as PLL2 clock source */ + case RCC_PLLSOURCE_CSI: + pllsrc = CSI_VALUE; + break; + + default: + pllsrc = 0U; + break; + } + + /* Compute VCO output frequency */ + return ((pllsrc / pllm) * (plln + (pllfracn / 0x2000U))); +} + +/** + * @brief Compute PLL3 VCO output frequency + * @retval Value of PLL3 VCO output frequency + */ +static uint32_t RCC_PLL3_GetVCOOutputFreq(void) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + uint32_t pllsrc; + uint32_t pllm; + uint32_t plln; + uint32_t pllfracn; + + /* Get PLL3 CFGR and DIVR register values */ + tmpreg1 = RCC->PLLCKSELR; + tmpreg2 = RCC->PLL3DIVR1; + + /* Retrieve PLL3 multiplication factor and divider */ + pllm = (tmpreg1 & RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos; + plln = (tmpreg2 & RCC_PLL3DIVR1_DIVN) + 1U; + + if (pllm == 0U) + { + /* Prescaler disabled */ + return 0U; + } + + /* Check if fractional part is enable */ + if ((tmpreg1 & RCC_PLLCFGR_PLL3FRACEN) != 0U) + { + pllfracn = (RCC->PLL3FRACR & RCC_PLL3FRACR_FRACN) >> RCC_PLL3FRACR_FRACN_Pos; + } + else + { + pllfracn = 0U; + } + + /* determine PLL source */ + switch (tmpreg1 & RCC_PLLCKSELR_PLLSRC) + { + /* HSI used as PLL3 clock source */ + case RCC_PLLSOURCE_HSI: + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + pllsrc = HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + } + else + { + /* Can't retrieve HSIDIV value */ + pllsrc = 0U; + } + break; + + /* HSE used as PLL3 clock source */ + case RCC_PLLSOURCE_HSE: + pllsrc = HSE_VALUE; + break; + + /* CSI used as PLL3 clock source */ + case RCC_PLLSOURCE_CSI: + pllsrc = CSI_VALUE; + break; + + default: + pllsrc = 0U; + break; + } + + /* Compute VCO output frequency */ + return ((pllsrc / pllm) * (plln + (pllfracn / 0x2000U))); +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc_ex.c new file mode 100644 index 000000000..afdfc27d5 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rcc_ex.c @@ -0,0 +1,3242 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_defines RCCEx Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCCEx_Private_Functions RCCEx Private Functions + * @{ + */ +static uint32_t RCC_GetCLKPFreq(void); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks (SDMMC12, CKPER, FMC, XSPI1, XSPI2, ADC, ADF1, CEC, FDCAN, I2C1/I3C1, + * I2C2, LPTIM1, LPTIM2, LPTIM3, LPTIM4, LPTIM5, LPUART1, SAI1, + * SAI2, SPDIF, SPI1, SPI2, SPI3, SPI4, SPI5, SPI6, SAI1, USART1, USART2, + * USART3, UART4, UART5, UART7, UART8, ETH1, USB and RTC). + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(const RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpreg; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- RTC configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* As the RTC clock source selection can be changed only if the Backup Domain is reset */ + /* reset the Backup domain only if the RTC Clock source selection is modified from default reset value */ + tmpreg = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + if ((tmpreg != RCC_RTCCLKSOURCE_DISABLE) && (tmpreg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Read back to check Backup domain enabled */ + if (READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) + { + ret = HAL_ERROR; + } + else + { + /* Store the content of BDCR register before the reset of Backup Domain */ + /* excepted the RTC clock source selection that will be changed */ + tmpreg = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the content of BDCR register */ + WRITE_REG(RCC->BDCR, tmpreg); + } + } + + if (ret == HAL_OK) + { + /* If LSE is selected as RTC clock source (and enabled prior to Backup Domain reset), wait for LSE reactivation */ + if (PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + __HAL_RCC_RTC_ENABLE(); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- FMC configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_FMC) == RCC_PERIPHCLK_FMC) + { + /* Check the parameters */ + assert_param(IS_RCC_FMCCLKSOURCE(PeriphClkInit->FmcClockSelection)); + + switch (PeriphClkInit->FmcClockSelection) + { + case RCC_FMCCLKSOURCE_HCLK: /* HCLK clock selected as FMC kernel peripheral clock */ + break; + + case RCC_FMCCLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for FMC kernel */ + /* Enable FMC kernel clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* FMC kernel clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_PLL2R: /* PLL2_R is used as clock source for FMC kernel */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_RCLK); + /* FMC kernel clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_HSI: /* HSI oscillator is used as clock source for FMC kernel */ + /* FMC kernel clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FMC kernel clock*/ + __HAL_RCC_FMC_CONFIG(PeriphClkInit->FmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- XSPI1 clock source configuration ----------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_XSPI1) == RCC_PERIPHCLK_XSPI1) + { + /* Check the parameters */ + assert_param(IS_RCC_XSPI1CLKSOURCE(PeriphClkInit->Xspi1ClockSelection)); + + switch (PeriphClkInit->Xspi1ClockSelection) + { + case RCC_XSPI1CLKSOURCE_HCLK: /* HCLK is used as clock source for Xspi1 */ + /* Nothing to do */ + break; + + case RCC_XSPI1CLKSOURCE_PLL2S: /* PLL2_S is used as clock source for Xspi1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_SCLK); + /* XSPI1 clock source configuration done later after clock selection check */ + break; + + case RCC_XSPI1CLKSOURCE_PLL2T: /* PLL2_T is used as clock source for Xspi1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_TCLK); + /* XSPI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Configure the XSPI1 clock source */ + __HAL_RCC_XSPI1_CONFIG(PeriphClkInit->Xspi1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- XSPI2 clock source configuration ----------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_XSPI2) == RCC_PERIPHCLK_XSPI2) + { + /* Check the parameters */ + assert_param(IS_RCC_XSPI2CLKSOURCE(PeriphClkInit->Xspi2ClockSelection)); + + switch (PeriphClkInit->Xspi2ClockSelection) + { + case RCC_XSPI2CLKSOURCE_HCLK: /* HCLK is used as clock source for Xspi2 */ + /* Nothing to do */ + break; + + case RCC_XSPI2CLKSOURCE_PLL2S: /* PLL2_S is used as clock source for Xspi2 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_SCLK); + /* XSPI2 clock source configuration done later after clock selection check */ + break; + + case RCC_XSPI2CLKSOURCE_PLL2T: /* PLL2_T is used as clock source for Xspi2 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_TCLK); + /* XSPI2 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Configure the XSPI2 clock source */ + __HAL_RCC_XSPI2_CONFIG(PeriphClkInit->Xspi2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------------ CKPER configuration --------------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_CKPER) == RCC_PERIPHCLK_CKPER) + { + /* Check the parameters */ + assert_param(IS_RCC_CKPERCLKSOURCE(PeriphClkInit->CkperClockSelection)); + + /* Configure the CKPER clock source */ + __HAL_RCC_CLKP_CONFIG(PeriphClkInit->CkperClockSelection); + } + + /*------------------------------------- SDMMC12 Configuration ------------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SDMMC12) == RCC_PERIPHCLK_SDMMC12) + { + /* Check the parameters */ + assert_param(IS_RCC_SDMMC12CLKSOURCE(PeriphClkInit->Sdmmc12ClockSelection)); + + switch (PeriphClkInit->Sdmmc12ClockSelection) + { + case RCC_SDMMC12CLKSOURCE_PLL2S: /* PLL2_S is used as clock source for SDMMC12 kernel */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_SCLK); + /* SDMMC12 kernel clock source configuration done later after clock selection check */ + break; + + case RCC_SDMMC12CLKSOURCE_PLL2T: /* PLL2_T is used as clock source for SDMMC12 kernel */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_TCLK); + /* SDMMC12 kernel clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SDMMC12 clock*/ + __HAL_RCC_SDMMC12_CONFIG(PeriphClkInit->Sdmmc12ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- ADC configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + switch (PeriphClkInit->AdcClockSelection) + { + + case RCC_ADCCLKSOURCE_PLL2P: /* PLL2_P is used as clock source for ADC */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_PLL3R: /* PLL3_R is used as clock source for ADC */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of ADC clock */ + /* ADC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ADC clock*/ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- ADF1 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_ADF1) == RCC_PERIPHCLK_ADF1) + { + /* Check the parameters */ + assert_param(IS_RCC_ADF1CLKSOURCE(PeriphClkInit->Adf1ClockSelection)); + + switch (PeriphClkInit->Adf1ClockSelection) + { + case RCC_ADF1CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for ADF1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* ADF1 clock source configuration done later after clock selection check */ + break; + + case RCC_ADF1CLKSOURCE_PLL3P: /* PLL3_P is used as clock source for ADF1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_PCLK); + /* ADF1 clock source configuration done later after clock selection check */ + break; + + case RCC_ADF1CLKSOURCE_HCLK: /* HCLK is used as clock source for ADF1 */ + case RCC_ADF1CLKSOURCE_PIN: /* External I2S_CKIN is used as clock source for ADF1 */ + case RCC_ADF1CLKSOURCE_CSI: /* CSI is used as clock source for ADF1 */ + case RCC_ADF1CLKSOURCE_HSI: /* HSI is used as clock source for ADF1 */ + /* ADF1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ADF1 clock*/ + __HAL_RCC_ADF1_CONFIG(PeriphClkInit->Adf1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------- CEC configuration ---------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + + /*---------------------- ETH1 REF configuration --------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_ETH1REF) == RCC_PERIPHCLK_ETH1REF) + { + /* Check the parameters */ + assert_param(IS_RCC_ETH1REFCLKSOURCE(PeriphClkInit->Eth1RefClockSelection)); + + /* Configure the ETH1 REF clock source */ + __HAL_RCC_ETH1REF_CONFIG(PeriphClkInit->Eth1RefClockSelection); + } + + /*---------------------- ETH1PHY configuration --------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_ETH1PHY) == RCC_PERIPHCLK_ETH1PHY) + { + /* Check the parameters */ + assert_param(IS_RCC_ETH1PHYCLKSOURCE(PeriphClkInit->Eth1PhyClockSelection)); + + switch (PeriphClkInit->Eth1PhyClockSelection) + { + case RCC_ETH1PHYCLKSOURCE_HSE: /* HSE is used as clock source for ETH PHY */ + /* ETH PHY clock source configuration done later after clock selection check */ + break; + + case RCC_ETH1PHYCLKSOURCE_PLL3S: /* PLL3_S is used as clock source for ETH PHY */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_SCLK); + /* ETH PHY clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ETH PHY clock*/ + __HAL_RCC_ETH1PHY_CONFIG(PeriphClkInit->Eth1PhyClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------- FDCAN configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + /* Check the parameters */ + assert_param(IS_RCC_FDCANCLKSOURCE(PeriphClkInit->FdcanClockSelection)); + + switch (PeriphClkInit->FdcanClockSelection) + { + case RCC_FDCANCLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for FDCAN kernel */ + /* Enable FDCAN Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_PLL2P: /* PLL2_P is used as clock source for FDCAN kernel */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_HSE: /* HSE is used as clock source for FDCAN kernel */ + /* FDCAN clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FDCAN clock*/ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ I2C1/I3C1 Configuration ------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_I2C1_I3C1) == RCC_PERIPHCLK_I2C1_I3C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1_I3C1CLKSOURCE(PeriphClkInit->I2c1_I3c1ClockSelection)); + + switch (PeriphClkInit->I2c1_I3c1ClockSelection) + { + case RCC_I2C1_I3C1CLKSOURCE_PLL3R: /* PLL3_R is used as clock source for I2C1/I3C1*/ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* I2C1/I3C1 clock source configuration done later after clock selection check */ + break; + + case RCC_I2C1_I3C1CLKSOURCE_PCLK1: /* PCLK1 is used as clock source for I2C1/I3C1*/ + case RCC_I2C1_I3C1CLKSOURCE_HSI: /* HSI is used as clock source for I2C1/I3C1*/ + case RCC_I2C1_I3C1CLKSOURCE_CSI: /* CSI is used as clock source for I2C1/I3C1*/ + /* I2C1/I3C1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of I2C1/I3C1 clock*/ + __HAL_RCC_I2C1_I3C1_CONFIG(PeriphClkInit->I2c1_I3c1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ I2C2/I2C3 Configuration -------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_I2C23) == RCC_PERIPHCLK_I2C23) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C23CLKSOURCE(PeriphClkInit->I2c23ClockSelection)); + + switch (PeriphClkInit->I2c23ClockSelection) + { + case RCC_I2C23CLKSOURCE_PLL3R: /* PLL3_R is used as clock source for I2C2/I2C3 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* I2C2/I2C3 clock source configuration done later after clock selection check */ + break; + + case RCC_I2C23CLKSOURCE_PCLK1: /* PCLK1 is used as clock source for I2C2/I2C3 */ + case RCC_I2C23CLKSOURCE_HSI: /* HSI is used as clock source for I2C2/I2C3 */ + case RCC_I2C23CLKSOURCE_CSI: /* CSI is used as clock source for I2C2/I2C3 */ + /* I2C2/I2C3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of I2C2/I2C3 clock*/ + __HAL_RCC_I2C23_CONFIG(PeriphClkInit->I2c23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM1 configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + + switch (PeriphClkInit->Lptim1ClockSelection) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: /* PCLK1 as clock source for LPTIM1 */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for LPTIM1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL3R: /* PLL3_R is used as clock source for LPTIM1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSE: + /* External low speed OSC clock is used as clock source for LPTIM1 */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as clock source for LPTIM1 */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as clock source for LPTIM1 */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM1 clock*/ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM2/LPTIM3 configuration -----------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_LPTIM23) == RCC_PERIPHCLK_LPTIM23) + { + switch (PeriphClkInit->Lptim23ClockSelection) + { + case RCC_LPTIM23CLKSOURCE_PCLK4: /* PCLK4 as clock source for LPTIM2/LPTIM3 */ + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM23CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for LPTIM2/LPTIM3 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM23CLKSOURCE_PLL3R: /* PLL3_R is used as clock source for LPTIM2/LPTIM3 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM23CLKSOURCE_LSE: + /* External low speed OSC clock is used as clock source for LPTIM2/LPTIM3 */ + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM23CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as clock source for LPTIM2/LPTIM3 */ + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM23CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM2 clock */ + /* LPTIM2/LPTIM3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM2/LPTIM3 clock*/ + __HAL_RCC_LPTIM23_CONFIG(PeriphClkInit->Lptim23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM4/LPTIM5 configuration -----------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_LPTIM45) == RCC_PERIPHCLK_LPTIM45) + { + switch (PeriphClkInit->Lptim45ClockSelection) + { + case RCC_LPTIM45CLKSOURCE_PCLK4: /* PCLK4 as clock source for LPTIM4/LPTIM5 */ + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM45CLKSOURCE_PLL2P: /* PLL2 is used as clock source for LPTIM4/LPTIM5 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM45CLKSOURCE_PLL3R: /* PLL3 is used as clock source for LPTIM4/LPTIM5 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM45CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM4/LPTIM5 clock */ + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM45CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM4/LPTIM5 clock */ + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM45CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM4/LPTIM5 clock */ + /* LPTIM4/LPTIM5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM4/LPTIM5 clock */ + __HAL_RCC_LPTIM45_CONFIG(PeriphClkInit->Lptim45ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- LPUART1 Configuration -------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + switch (PeriphClkInit->Lpuart1ClockSelection) + { + case RCC_LPUART1CLKSOURCE_PCLK4: /* PCLK4 selected as clock source for LPUART1 */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL2Q: /* PLL2_Q is used as clock source for LPUART1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_QCLK); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for LPUART1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_LSE: + /* LSE, oscillator is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPUART1 clock */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- LTDC Configuration ----------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + /* LTDC internally connected to PLL3_R output clock */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + } + + /*---------------------------- PSSI configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PSSI) == RCC_PERIPHCLK_PSSI) + { + /* Check the parameters */ + assert_param(IS_RCC_PSSICLKSOURCE(PeriphClkInit->PssiClockSelection)); + + switch (PeriphClkInit->PssiClockSelection) + { + case RCC_PSSICLKSOURCE_PLL3R: /* PLL3_R is used as clock source for PSSI */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* PSSI clock source configuration done later after clock selection check */ + break; + + case RCC_PSSICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of PSSI clock */ + /* PSSI clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of PSSI clock*/ + __HAL_RCC_PSSI_CONFIG(PeriphClkInit->PssiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SAI1 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); + + switch (PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for SAI1 */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for SAI1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL3P: /* PLL3_P is used as clock source for SAI1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI1 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SAI2 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); + + switch (PeriphClkInit->Sai2ClockSelection) + { + case RCC_SAI2CLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for SAI2 */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for SAI2 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLL3P: /* PLL3_P is used as clock source for SAI2 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PIN: /* External clock is used as source of SAI2 clock */ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_SPDIF: /* SPDIF clock is used as source of SAI2 clock */ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2 clock*/ + __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPDIFRX configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) + { + /* Check the parameters */ + assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifrxClockSelection)); + + switch (PeriphClkInit->SpdifrxClockSelection) + { + case RCC_SPDIFRXCLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for SPDIFRX */ + /* Enable PLL1Q Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL2R: /* PLL2_R is used as clock source for SPDIFRX */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_RCLK); + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL3R: /* PLL3_R is used as clock source for SPDIFRX */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_RCLK); + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_HSI: + /* Internal OSC clock is used as source of SPDIFRX clock*/ + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPDIFRX clock */ + __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifrxClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI1 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SPI1) == RCC_PERIPHCLK_SPI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SPI1CLKSOURCE(PeriphClkInit->Spi1ClockSelection)); + + switch (PeriphClkInit->Spi1ClockSelection) + { + case RCC_SPI1CLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for SPI1 */ + /* Enable SPI Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI1CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for SPI1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SPI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI1CLKSOURCE_PLL3P: /* PLL3_P is used as clock source for SPI1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SPI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI1CLKSOURCE_PIN: /* External I2S_CKIN is used as clock source for SPI1 */ + /* SPI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI1CLKSOURCE_CLKP: /* HSI, HSE, or CSI oscillator is used as source of SPI1 clock */ + /* SPI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI1 clock*/ + __HAL_RCC_SPI1_CONFIG(PeriphClkInit->Spi1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI2/SPI3 configuration ---------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SPI23) == RCC_PERIPHCLK_SPI23) + { + /* Check the parameters */ + assert_param(IS_RCC_SPI23CLKSOURCE(PeriphClkInit->Spi23ClockSelection)); + + switch (PeriphClkInit->Spi23ClockSelection) + { + case RCC_SPI23CLKSOURCE_PLL1Q: /* PLL1_Q is used as clock source for SPI2/SPI3 */ + /* Enable SPI Clock output generated form System PLL . */ + __HAL_RCC_PLL1CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI2/SPI3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI23CLKSOURCE_PLL2P: /* PLL2_P is used as clock source for SPI2/SPI3 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SPI2/SPI3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI23CLKSOURCE_PLL3P: /* PLL3_P is used as clock source for SPI2/SPI3 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_PCLK); + /* SPI2/SPI3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI23CLKSOURCE_PIN: /* External clock I2S_CKIN is used as clock source for SPI2/SPI3 */ + /* SPI2/SPI3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI23CLKSOURCE_CLKP: /* HSI, HSE, or CSI oscillator is used as source of SPI2/SPI3 clock */ + /* SPI2/SPI3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI2/SPI3 clock*/ + __HAL_RCC_SPI23_CONFIG(PeriphClkInit->Spi23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI4/5 configuration -------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SPI45) == RCC_PERIPHCLK_SPI45) + { + /* Check the parameters */ + assert_param(IS_RCC_SPI45CLKSOURCE(PeriphClkInit->Spi45ClockSelection)); + + switch (PeriphClkInit->Spi45ClockSelection) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* PCLK2 as clock source for SPI4/SPI5 */ + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_PLL2Q: /* PLL2_Q is used as clock source for SPI4/SPI5 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for SPI4/SPI5 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSI: /* HSI oscillator clock is used as source of SPI4/SPI5 */ + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_CSI: /* CSI oscillator clock is used as source of SPI4/SPI5 */ + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSE: /* HSE oscillator clock is used as source of SPI4/SPI5 */ + /* SPI4/SPI5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI4/SPI5 clock */ + __HAL_RCC_SPI45_CONFIG(PeriphClkInit->Spi45ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI6 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_SPI6) == RCC_PERIPHCLK_SPI6) + { + /* Check the parameters */ + assert_param(IS_RCC_SPI6CLKSOURCE(PeriphClkInit->Spi6ClockSelection)); + + switch (PeriphClkInit->Spi6ClockSelection) + { + case RCC_SPI6CLKSOURCE_PCLK4: /* PCLK4 as clock source for SPI6 */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_PLL2Q: /* PLL2_Q is used as clock source for SPI6 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for SPI6 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSI: /* HSI oscillator clock is used as source for SPI6 */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_CSI: /* CSI oscillator clock is used as source for SPI6 */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSE: /* HSE oscillator is used as source for SPI6 */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI6 clock*/ + __HAL_RCC_SPI6_CONFIG(PeriphClkInit->Spi6ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- USART1 configuration --------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + switch (PeriphClkInit->Usart1ClockSelection) + { + case RCC_USART1CLKSOURCE_PCLK2: /* PCLK2 as clock source for USART1 */ + /* USART1 clock source configuration done later after clock selection check */ + break; + + case RCC_USART1CLKSOURCE_PLL2Q: /* PLL2_Q is used as clock source for USART1 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USART1 clock source configuration done later after clock selection check */ + break; + + case RCC_USART1CLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for USART1 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USART1 clock source configuration done later after clock selection check */ + break; + + case RCC_USART1CLKSOURCE_HSI: /* HSI oscillator clock is used as source for USART1 */ + /* USART1 clock source configuration done later after clock selection check */ + break; + + case RCC_USART1CLKSOURCE_CSI: /* CSI oscillator clock is used as source for USART1 */ + /* USART1 clock source configuration done later after clock selection check */ + break; + + case RCC_USART1CLKSOURCE_LSE: /* LSE oscillator is used as source for USART1 */ + /* USART1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART1 clock */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------- USART2/USART3/UART4/UART5/UART7/UART8 Configuration --------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_USART234578) == RCC_PERIPHCLK_USART234578) + { + /* Check the parameters */ + assert_param(IS_RCC_USART234578CLKSOURCE(PeriphClkInit->Usart234578ClockSelection)); + + switch (PeriphClkInit->Usart234578ClockSelection) + { + case RCC_USART234578CLKSOURCE_PCLK1: /* PCLK1 as clock source for USART2/USART3/UART4/UART5/UART7/UART8 */ + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL2Q: /* PLL2_Q is used as clock source for USART2/USART3/UART4/UART5/UART7/UART8 */ + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for USART2/USART3/UART4/UART5/UART7/UART8 */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART2/USART3/UART4/UART5/UART7/UART8 clock */ + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART2/USART3/UART4/UART5/UART7/UART8 clock */ + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART2/USART3/UART4/UART5/UART7/UART8 clock */ + /* USART2/USART3/UART4/UART5/UART7/UART8 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART2/USART3/UART4/UART5/UART7/UART8 clock */ + __HAL_RCC_USART234578_CONFIG(PeriphClkInit->Usart234578ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ USBPHYC Configuration ---------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_USBPHYC) == RCC_PERIPHCLK_USBPHYC) + { + /* Check the parameters */ + assert_param(IS_RCC_USBPHYCCLKSOURCE(PeriphClkInit->UsbPhycClockSelection)); + + switch (PeriphClkInit->UsbPhycClockSelection) + { + case RCC_USBPHYCCLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for USBPHYC */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USBPHYC clock source configuration done later after clock selection check */ + break; + + case RCC_USBPHYCCLKSOURCE_HSE: /* HSE is used as clock source for USBPHYC */ + case RCC_USBPHYCCLKSOURCE_HSE_DIV2: /* HSE divided by 2 is used as clock source for USBPHYC */ + /* USBPHYC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USBPHYC clock*/ + __HAL_RCC_USBPHYC_CONFIG(PeriphClkInit->UsbPhycClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ USBOTGFS Configuration ---------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_USBOTGFS) == RCC_PERIPHCLK_USBOTGFS) + { + /* Check the parameters */ + assert_param(IS_RCC_USBOTGFSCLKSOURCE(PeriphClkInit->UsbOtgFsClockSelection)); + + switch (PeriphClkInit->UsbOtgFsClockSelection) + { + case RCC_USBOTGFSCLKSOURCE_PLL3Q: /* PLL3_Q is used as clock source for USB OTG FS */ + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL_QCLK); + /* USB OTG FS clock source configuration done later after clock selection check */ + break; + + case RCC_USBOTGFSCLKSOURCE_HSI48: /* HSI48 is used as clock source for USB OTG FS */ + case RCC_USBOTGFSCLKSOURCE_HSE: /* HSE is used as clock source for USB OTG FS */ + case RCC_USBOTGFSCLKSOURCE_CLK48: /* USBPHYC CLK48 is used as clock source for USB OTG FS */ + /* USB OTG FS clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USBPHYC clock*/ + __HAL_RCC_USBOTGFS_CONFIG(PeriphClkInit->UsbOtgFsClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------------ TIM configuration --------------------------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) + { + /* Check the parameters */ + assert_param(IS_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection)); + + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER_CONFIG(PeriphClkInit->TIMPresSelection); + } + + if (status == HAL_OK) + { + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks : + * (SDMMC12, CKPER, FMC, ADC, ADF1, CEC, FDCAN, I2C2/I2C3, I3C1, LPTIM1, + * LPTIM2/LPTIM3, LPTIM4/LPTIM5, LTDC, LPUART1, XSPI1, XSPI2, PSSI, RTC, SAI1, SAI2, + * SPDIF, SPI1, SPI2/SPI3, SPI4/SPI5, SPI6, TIM, USART1, USART2/USART3/UART4/UART5/UART7/UART8 + * USBPHYC, USB OTGFS). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_ADF1 | RCC_PERIPHCLK_CEC | \ + RCC_PERIPHCLK_CKPER | RCC_PERIPHCLK_ETH1REF | RCC_PERIPHCLK_ETH1PHY | \ + RCC_PERIPHCLK_FDCAN | RCC_PERIPHCLK_FMC | RCC_PERIPHCLK_I2C1_I3C1 | \ + RCC_PERIPHCLK_I2C23 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM23 | \ + RCC_PERIPHCLK_LPTIM45 | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_XSPI1 | RCC_PERIPHCLK_XSPI2 | RCC_PERIPHCLK_PSSI | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_SDMMC12 | RCC_PERIPHCLK_SPDIFRX | RCC_PERIPHCLK_SPI1 | \ + RCC_PERIPHCLK_SPI23 | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6 | \ + RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART234578 | \ + RCC_PERIPHCLK_USBPHYC | RCC_PERIPHCLK_USBOTGFS; + + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + /* Get the ADF1 clock source -----------------------------------------------*/ + PeriphClkInit->Adf1ClockSelection = __HAL_RCC_GET_ADF1_SOURCE(); + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + /* Get the CKPER clock source ----------------------------------------------*/ + PeriphClkInit->CkperClockSelection = __HAL_RCC_GET_CLKP_SOURCE(); + /* Get the ETH1 clock source ----------------------------------------------*/ + PeriphClkInit->Eth1RefClockSelection = __HAL_RCC_GET_ETH1REF_SOURCE(); + /* Get the ETH1PHY clock source ----------------------------------------------*/ + PeriphClkInit->Eth1PhyClockSelection = __HAL_RCC_GET_ETH1PHY_SOURCE(); + /* Get the FDCAN kernel clock source ---------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); + /* Get the FMC kernel clock source -----------------------------------------*/ + PeriphClkInit->FmcClockSelection = __HAL_RCC_GET_FMC_SOURCE(); + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1_I3c1ClockSelection = __HAL_RCC_GET_I2C1_I3C1_SOURCE(); + /* Get the I2C2/I2C3 clock source ------------------------------------------*/ + PeriphClkInit->I2c23ClockSelection = __HAL_RCC_GET_I2C23_SOURCE(); + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + /* Get the LPTIM2/LPTIM3 clock source --------------------------------------*/ + PeriphClkInit->Lptim23ClockSelection = __HAL_RCC_GET_LPTIM23_SOURCE(); + /* Get the LPTIM4/LPTIM5 clock source --------------------------------------*/ + PeriphClkInit->Lptim45ClockSelection = __HAL_RCC_GET_LPTIM45_SOURCE(); + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); + /* Get the LTDC clock source -----------------------------------------------*/ + PeriphClkInit->LtdcClockSelection = __HAL_RCC_GET_LTDC_SOURCE(); + /* Get the XSPI1 clock source -----------------------------------------------*/ + PeriphClkInit->Xspi1ClockSelection = __HAL_RCC_GET_XSPI1_SOURCE(); + /* Get the XSPI2 clock source -----------------------------------------------*/ + PeriphClkInit->Xspi2ClockSelection = __HAL_RCC_GET_XSPI2_SOURCE(); + /* Get the PSSI clock source -----------------------------------------------*/ + PeriphClkInit->PssiClockSelection = __HAL_RCC_GET_PSSI_SOURCE(); + /* Get the RTC clock source -----------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); + /* Get the SAI2 clock source -----------------------------------------------*/ + PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); + /* Get the SDMMC clock source ----------------------------------------------*/ + PeriphClkInit->Sdmmc12ClockSelection = __HAL_RCC_GET_SDMMC12_SOURCE(); + /* Get the SPDIFRX clock source --------------------------------------------*/ + PeriphClkInit->SpdifrxClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); + /* Get the SPI1 clock source -----------------------------------------------*/ + PeriphClkInit->Spi1ClockSelection = __HAL_RCC_GET_SPI1_SOURCE(); + /* Get the SPI2/SPI3 clock source ------------------------------------------*/ + PeriphClkInit->Spi23ClockSelection = __HAL_RCC_GET_SPI23_SOURCE(); + /* Get the SPI4/SPI5 clock source ------------------------------------------*/ + PeriphClkInit->Spi45ClockSelection = __HAL_RCC_GET_SPI45_SOURCE(); + /* Get the SPI6 clock source -----------------------------------------------*/ + PeriphClkInit->Spi6ClockSelection = __HAL_RCC_GET_SPI6_SOURCE(); + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->CFGR & RCC_CFGR_TIMPRE) == 0U) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DISABLE; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ENABLE; + } + /* Get the USART1 configuration --------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the USART2/USART3/UART4/UART5/UART7/UART8 clock source --------------*/ + PeriphClkInit->Usart234578ClockSelection = __HAL_RCC_GET_USART234578_SOURCE(); + /* Get the USBPHYC clock source --------------------------------------------*/ + PeriphClkInit->UsbPhycClockSelection = __HAL_RCC_GET_USBPHYC_SOURCE(); + /* Get the USB OTG FS clock source -----------------------------------------*/ + PeriphClkInit->UsbOtgFsClockSelection = __HAL_RCC_GET_USBOTGFS_SOURCE(); +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral (SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API or + * if the selected clock source is not enabled (HSI, PLLs clock output..) + * @param PeriphClk: Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_FMC : FMC peripheral clock + * @arg RCC_PERIPHCLK_XSPI1 : Xspi1 peripheral clock + * @arg RCC_PERIPHCLK_XSPI2 : Xspi2 peripheral clock + * @arg RCC_PERIPHCLK_CKPER : CKPER peripheral clock + * @arg RCC_PERIPHCLK_ADC : ADC peripheral clock + * @arg RCC_PERIPHCLK_ADF1 : ADF1 peripheral clock + * @arg RCC_PERIPHCLK_CEC : CEC peripheral clock + * @arg RCC_PERIPHCLK_ETH1REF : ETH1REF peripheral clock + * @arg RCC_PERIPHCLK_ETH1PHY : ETH1PHY peripheral clock + * @arg RCC_PERIPHCLK_FDCAN : FDCAN peripheral clock + * @arg RCC_PERIPHCLK_I2C23 : I2C2/I2C3 peripheral clock + * @arg RCC_PERIPHCLK_I2C1_I3C1 : I2C1/I3C1 peripheral clock + * @arg RCC_PERIPHCLK_LPTIM1 : LPTIM1 peripheral clock + * @arg RCC_PERIPHCLK_LPTIM23 : LPTIM23 peripheral clock + * @arg RCC_PERIPHCLK_LPTIM45 : LPTIM45 peripheral clock + * @arg RCC_PERIPHCLK_LPUART1 : LPUART1 peripheral clock + * @arg RCC_PERIPHCLK_LTDC : LTDC peripheral clock + * @arg RCC_PERIPHCLK_PSSI : PSSI peripheral clock + * @arg RCC_PERIPHCLK_RTC : RTC peripheral clock + * @arg RCC_PERIPHCLK_SAI1 : SAI1 peripheral clock + * @arg RCC_PERIPHCLK_SAI2 : SAI2 peripheral clock + * @arg RCC_PERIPHCLK_SDMMC12 : SDMMC12 peripheral clock + * @arg RCC_PERIPHCLK_SPDIFRX : SPDIFRX peripheral clock + * @arg RCC_PERIPHCLK_SPI1 : SPI1 peripheral clock + * @arg RCC_PERIPHCLK_SPI23 : SPI2/SPI3 peripheral clock + * @arg RCC_PERIPHCLK_SPI45 : SPI4/SPI5 peripheral clock + * @arg RCC_PERIPHCLK_SPI6 : SPI6 peripheral clock + * @arg RCC_PERIPHCLK_USART1 : USART1 peripheral clock + * @arg RCC_PERIPHCLK_USART234578 : USART2/3/5/7/8 peripheral clock + * @arg RCC_PERIPHCLK_USBOTGFS : USBOTGFS peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0; /* Set to 0 for returned value if no source clock */ + uint32_t clocksource; + uint32_t ethclocksource; + uint32_t prescaler; + + switch (PeriphClk) + { + case RCC_PERIPHCLK_FMC: + clocksource = __HAL_RCC_GET_FMC_SOURCE(); + + switch (clocksource) + { + case RCC_FMCCLKSOURCE_HCLK: /* HCLK is the clock source for FMC kernel peripheral clock */ + frequency = HAL_RCC_GetHCLKFreq(); + break; + case RCC_FMCCLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for FMC kernel peripheral clock */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_FMCCLKSOURCE_PLL2R: /* PLL2 'R' is the clock source for FMC kernel peripheral clock */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2RFreq(); + } + break; + case RCC_FMCCLKSOURCE_HSI: /* HSI is the clock source for FMC kernel peripheral clock */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_FMCCLKSOURCE_HCLK_DIV4: /* HCLK/4 is the clock source for FMC kernel peripheral clock */ + frequency = (HAL_RCC_GetHCLKFreq() / 4U); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_XSPI1: + clocksource = __HAL_RCC_GET_XSPI1_SOURCE(); + + switch (clocksource) + { + case RCC_XSPI1CLKSOURCE_HCLK: /* HCLK is the clock source for XSPI1 kernel peripheral clock */ + frequency = HAL_RCC_GetHCLKFreq(); + break; + case RCC_XSPI1CLKSOURCE_PLL2S: /* PLL2 'S' is the clock source for XSPI1 kernel peripheral clock */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_SCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2SFreq(); + } + break; + case RCC_XSPI1CLKSOURCE_PLL2T: /* PLL2 'T' is the clock source for XSPI1 kernel peripheral clock */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_TCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2TFreq(); + } + break; + case RCC_XSPI1CLKSOURCE_HCLK_DIV4: /* HCLK/4 is the clock source for XSPI1 kernel peripheral clock */ + frequency = (HAL_RCC_GetHCLKFreq() / 4U); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_XSPI2: + clocksource = __HAL_RCC_GET_XSPI2_SOURCE(); + + switch (clocksource) + { + case RCC_XSPI2CLKSOURCE_HCLK: /* HCLK is the clock source for XSPI2 kernel peripheral clock */ + frequency = HAL_RCC_GetHCLKFreq(); + break; + case RCC_XSPI2CLKSOURCE_PLL2S: /* PLL2 'S' is the clock source for XSPI2 kernel peripheral clock */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_SCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2SFreq(); + } + break; + case RCC_XSPI2CLKSOURCE_PLL2T: /* PLL2 'T' is the clock source for XSPI2 kernel peripheral clock */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_TCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2TFreq(); + } + break; + case RCC_XSPI2CLKSOURCE_HCLK_DIV4: /* HCLK/4 is the clock source for XSPI2 kernel peripheral clock */ + frequency = (HAL_RCC_GetHCLKFreq() / 4U); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_CKPER: + clocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + switch (clocksource) + { + case RCC_CLKPSOURCE_HSI: /* HSI is the clock source for CKPER */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_CLKPSOURCE_CSI: /* CSI is the clock source for CKPER */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_CLKPSOURCE_HSE: /* HSE is the clock source for CKPER */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_ADC: + clocksource = __HAL_RCC_GET_ADC_SOURCE(); + + switch (clocksource) + { + case RCC_ADCCLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for ADC */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_ADCCLKSOURCE_PLL3R: /* PLL3 'R' is the clock source for ADC */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_ADCCLKSOURCE_CLKP: /* CKPER is the clock source for ADC */ + frequency = RCC_GetCLKPFreq(); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_ADF1: + clocksource = __HAL_RCC_GET_ADF1_SOURCE(); + + switch (clocksource) + { + case RCC_ADF1CLKSOURCE_HCLK: /* HCLK is the clock source for ADF1 */ + frequency = HAL_RCC_GetHCLKFreq(); + break; + case RCC_ADF1CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for ADF1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_ADF1CLKSOURCE_PLL3P: /* PLL3 'P' is the clock source for ADF1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3PFreq(); + } + break; + case RCC_ADF1CLKSOURCE_PIN: /* External I2S_CKIN is used as clock source for ADF1 */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + case RCC_ADF1CLKSOURCE_CSI: /* CSI is the clock source for ADF1 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_ADF1CLKSOURCE_HSI: /* HSI is the clock source for ADF1 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_CEC: + clocksource = __HAL_RCC_GET_CEC_SOURCE(); + + switch (clocksource) + { + case RCC_CECCLKSOURCE_LSE: /* LSE is the clock source for CEC */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + case RCC_CECCLKSOURCE_LSI: /* LSI is the clock source for CEC */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + frequency = LSI_VALUE; + } + break; + case RCC_CECCLKSOURCE_CSI: /* CSI is the clock source for CEC */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_ETH1REF: + clocksource = __HAL_RCC_GET_ETH1REF_SOURCE(); + + switch (clocksource) + { + case RCC_ETH1REFCLKSOURCE_PHY: /* PHY is the clock source for ETH1REF */ + /* Can't retrieve this source's frequency, it is by default set to 0 */ + break; + case RCC_ETH1REFCLKSOURCE_HSE: /* HSE is the clock source for ETH1REF */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_ETH1REFCLKSOURCE_ETH: /* ETH is the clock source for ETH1REF */ + ethclocksource = __HAL_RCC_GET_ETH1PHY_SOURCE(); + + switch (ethclocksource) + { + case RCC_ETH1PHYCLKSOURCE_HSE: + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_ETH1PHYCLKSOURCE_PLL3S: + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_SCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3SFreq(); + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_ETH1PHY: + clocksource = __HAL_RCC_GET_ETH1PHY_SOURCE(); + + switch (clocksource) + { + case RCC_ETH1PHYCLKSOURCE_HSE: + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_ETH1PHYCLKSOURCE_PLL3S: + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_SCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3SFreq(); + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_FDCAN: + clocksource = __HAL_RCC_GET_FDCAN_SOURCE(); + + switch (clocksource) + { + case RCC_FDCANCLKSOURCE_HSE: /*!< HSE is the clock source for FDCAN */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_FDCANCLKSOURCE_PLL1Q: /*!< PLL1 'Q' ois the clock source for FDCAN */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_FDCANCLKSOURCE_PLL2P: /*!< PLL2 'P' is the clock source for FDCAN */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_I2C23: + clocksource = __HAL_RCC_GET_I2C23_SOURCE(); + + switch (clocksource) + { + case RCC_I2C23CLKSOURCE_PCLK1: /*!< PCLK1 is the clock source for I2C23 */ + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C23CLKSOURCE_PLL3R: /*!< PLL3R is the clock source for I2C23 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_I2C23CLKSOURCE_HSI: /*!< HSI is the clock source for I2C23 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_I2C23CLKSOURCE_CSI: /*!< CSI is the clock source for I2C23 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_I2C1_I3C1: + clocksource = __HAL_RCC_GET_I2C1_I3C1_SOURCE(); + + switch (clocksource) + { + case RCC_I2C1_I3C1CLKSOURCE_PCLK1: /*!< PCLK1 is the clock source for I2C1/I3C1 */ + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C1_I3C1CLKSOURCE_PLL3R: /*!< PLL3 'R' is the clock source for I2C1/I3C1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_I2C1_I3C1CLKSOURCE_HSI: /*!< HSI is the clock source for I2C1/I3C1 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_I2C1_I3C1CLKSOURCE_CSI: /*!< CSI is the clock source for I2C1/I3C1 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_LPTIM1: + clocksource = __HAL_RCC_GET_LPTIM1_SOURCE(); + + switch (clocksource) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: /* PCLK1 is the clock source for LPTIM1 */ + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPTIM1CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for LPTIM1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_LPTIM1CLKSOURCE_PLL3R: /* PLL3 'R' is the clock source for LPTIM1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_LPTIM1CLKSOURCE_LSE: /* LSE is the clock source for LPTIM1 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + case RCC_LPTIM1CLKSOURCE_LSI: /* LSI is the clock source for LPTIM1 */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + frequency = LSI_VALUE; + } + break; + case RCC_LPTIM1CLKSOURCE_CLKP: /* CKPER is the clock source for LPTIM1 */ + frequency = RCC_GetCLKPFreq(); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_LPTIM23: + clocksource = __HAL_RCC_GET_LPTIM23_SOURCE(); + + switch (clocksource) + { + case RCC_LPTIM23CLKSOURCE_PCLK4: /* PCLK4 is the clock source for LPTIM2/LPTIM3 */ + frequency = HAL_RCC_GetPCLK4Freq(); + break; + case RCC_LPTIM23CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for LPTIM2/LPTIM3 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_LPTIM23CLKSOURCE_PLL3R: /* PLL3 'R' is the clock source for LPTIM2/LPTIM3 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_LPTIM23CLKSOURCE_LSE: /* LSE is the clock source for LPTIM2/LPTIM3 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + case RCC_LPTIM23CLKSOURCE_LSI: /* LSI is the clock source for LPTIM2/LPTIM3 */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + frequency = LSI_VALUE; + } + break; + case RCC_LPTIM23CLKSOURCE_CLKP: /* CKPER is the clock source for LPTIM2/LPTIM3 */ + frequency = RCC_GetCLKPFreq(); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_LPTIM45: + clocksource = __HAL_RCC_GET_LPTIM45_SOURCE(); + + switch (clocksource) + { + case RCC_LPTIM45CLKSOURCE_PCLK4: /* PCLK4 is the clock source for LPTIM4/LPTIM5 */ + frequency = HAL_RCC_GetPCLK4Freq(); + break; + case RCC_LPTIM45CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for LPTIM4/LPTIM5 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_LPTIM45CLKSOURCE_PLL3R: /* PLL3 'R' is the clock source for LPTIM4/LPTIM5 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_LPTIM45CLKSOURCE_LSE: /* LSE is the clock source for LPTIM4/LPTIM5 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + case RCC_LPTIM45CLKSOURCE_LSI: /* LSI is the clock source for LPTIM4/LPTIM5 */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + frequency = LSI_VALUE; + } + break; + case RCC_LPTIM45CLKSOURCE_CLKP: /* CKPER is the clock source for LPTIM4/LPTIM5 */ + frequency = RCC_GetCLKPFreq(); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_LPUART1: + clocksource = __HAL_RCC_GET_LPUART1_SOURCE(); + + switch (clocksource) + { + case RCC_LPUART1CLKSOURCE_PCLK4: /*!< PCLK4 is the clock source for LPUART1 */ + frequency = HAL_RCC_GetPCLK4Freq(); + break; + case RCC_LPUART1CLKSOURCE_PLL2Q: /*!< PLL2 'Q' is the clock source for LPUART1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2QFreq(); + } + break; + case RCC_LPUART1CLKSOURCE_PLL3Q: /*!< PLL3 'Q' is the clock source for LPUART1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_LPUART1CLKSOURCE_HSI: /*!< HSI is the clock source for LPUART1 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_LPUART1CLKSOURCE_CSI: /*!< CSI is the clock source for LPUART1 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_LPUART1CLKSOURCE_LSE: /*!< LSE is the clock source for LPUART1 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_LTDC: + /* Unique PLL3 'R' clock source */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + + case RCC_PERIPHCLK_PSSI: + clocksource = __HAL_RCC_GET_PSSI_SOURCE(); + + switch (clocksource) + { + case RCC_PSSICLKSOURCE_PLL3R: /*!< PLL3 'R' is the clock source for PSSI */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_PSSICLKSOURCE_CLKP: /*!< CLKP is the clock source for PSSI */ + frequency = RCC_GetCLKPFreq(); + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_RTC: + clocksource = __HAL_RCC_GET_RTC_SOURCE(); + + switch (clocksource) + { + case RCC_RTCCLKSOURCE_DISABLE: + /* Nothing to do, frequency is by default set to 0 */ + break; + case RCC_RTCCLKSOURCE_LSE: /*!< LSE is the clock source for RTC */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + case RCC_RTCCLKSOURCE_LSI: /*!< LSI is the clock source for RTC */ + if (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + frequency = LSI_VALUE; + } + break; + default: + if (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) /*!< HSE is the clock source for RTC */ + { + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + prescaler = READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) >> RCC_CFGR_RTCPRE_Pos; + if (prescaler > 1U) + { + frequency = HSE_VALUE / prescaler; + } + } + } + else + { + /* Nothing to do, frequency is by default set to 0 */ + } + break; + } + break; + + case RCC_PERIPHCLK_SAI1: + clocksource = __HAL_RCC_GET_SAI1_SOURCE(); + + switch (clocksource) + { + case RCC_SAI1CLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for SAI1 */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_SAI1CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for SAI1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_SAI1CLKSOURCE_PLL3P: /* PLL3 'P' is the clock source for SAI1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3PFreq(); + } + break; + case RCC_SAI1CLKSOURCE_CLKP: /* CKPER is the clock source for SAI1 */ + frequency = RCC_GetCLKPFreq(); + break; + case RCC_SAI1CLKSOURCE_PIN: /* External clock is the clock source for SAI1 */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SAI2: + clocksource = __HAL_RCC_GET_SAI2_SOURCE(); + + switch (clocksource) + { + case RCC_SAI2CLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for SAI2 */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_SAI2CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for SAI2 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_SAI2CLKSOURCE_PLL3P: /* PLL3 'P' is the clock source for SAI2 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3PFreq(); + } + break; + case RCC_SAI2CLKSOURCE_CLKP: /* CKPER is the clock source for SAI2 */ + frequency = RCC_GetCLKPFreq(); + break; + case RCC_SAI2CLKSOURCE_SPDIF: + /* Can't retrieve this source's frequency, it is by default set to 0 */ + break; + case RCC_SAI2CLKSOURCE_PIN: /* External clock is the clock source for SAI2 */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SDMMC12: /* SDMMC1 and SDMMC2 */ + + clocksource = __HAL_RCC_GET_SDMMC12_SOURCE(); + + if (clocksource == + RCC_SDMMC12CLKSOURCE_PLL2S) /* PLL2 'S' is the clock source for SDMMC1 and SDMMC2 kernel peripheral clock */ + { + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_SCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2SFreq(); + } + } + else /* PLL2 'T' is the clock source for SDMMC1 and SDMMC2 kernel peripheral clock */ + { + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_TCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2TFreq(); + } + } + break; + + case RCC_PERIPHCLK_SPDIFRX: + clocksource = __HAL_RCC_GET_SPDIFRX_SOURCE(); + + switch (clocksource) + { + case RCC_SPDIFRXCLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for SPDIFRX */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_SPDIFRXCLKSOURCE_PLL2R: /* PLL2 'R' is the clock source for SPDIFRX */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2RFreq(); + } + break; + case RCC_SPDIFRXCLKSOURCE_PLL3R: /* PLL3 'R' is the clock source for SPDIFRX */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_RCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3RFreq(); + } + break; + case RCC_SPDIFRXCLKSOURCE_HSI: /* HSI is the clock source for SPDIFRX */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SPI1: + clocksource = __HAL_RCC_GET_SPI1_SOURCE(); + + switch (clocksource) + { + case RCC_SPI1CLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for SPI1 */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_SPI1CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for SPI1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_SPI1CLKSOURCE_PLL3P: /* PLL3 'P' is the clock source for SPI1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3PFreq(); + } + break; + case RCC_SPI1CLKSOURCE_CLKP: /* CKPER is the clock source for SPI1 */ + frequency = RCC_GetCLKPFreq(); + break; + case RCC_SPI1CLKSOURCE_PIN: /* External I2S_CKIN is used as clock source for SPI1 */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SPI23: + clocksource = __HAL_RCC_GET_SPI23_SOURCE(); + + switch (clocksource) + { + case RCC_SPI23CLKSOURCE_PLL1Q: /* PLL1 'Q' is the clock source for SPI2/SPI3 */ + if (__HAL_RCC_GET_PLL1CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL1QFreq(); + } + break; + case RCC_SPI23CLKSOURCE_PLL2P: /* PLL2 'P' is the clock source for SPI2/SPI3 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2PFreq(); + } + break; + case RCC_SPI23CLKSOURCE_PLL3P: /* PLL3 'P' is the clock source for SPI2/SPI3 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_PCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3PFreq(); + } + break; + case RCC_SPI23CLKSOURCE_CLKP: /* CKPER is the clock source for SPI2/SPI3 */ + frequency = RCC_GetCLKPFreq(); + break; + case RCC_SPI23CLKSOURCE_PIN: /* External I2S_CKIN is used as clock source for SPI2/SPI3 */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SPI45: + clocksource = __HAL_RCC_GET_SPI45_SOURCE(); + + switch (clocksource) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* PCLK2 is the clock source for SPI4/SPI5 */ + frequency = HAL_RCC_GetPCLK2Freq(); + break; + case RCC_SPI45CLKSOURCE_PLL2Q: /* PLL2 'Q' is the clock source for SPI4/SPI5 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2QFreq(); + } + break; + case RCC_SPI45CLKSOURCE_PLL3Q: /* PLL3 'Q' is the clock source for SPI4/SPI5 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_SPI45CLKSOURCE_HSI: /* HSI is the clock source for SPI4/SPI5 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_SPI45CLKSOURCE_CSI: /* CSI is the clock source for SPI4/SPI5 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_SPI45CLKSOURCE_HSE: /* HSE is the clock source for SPI4/SPI5 */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_SPI6: + clocksource = __HAL_RCC_GET_SPI6_SOURCE(); + + switch (clocksource) + { + case RCC_SPI6CLKSOURCE_PCLK4: /* PCLK4 is the clock source for SPI6 */ + frequency = HAL_RCC_GetPCLK4Freq(); + break; + case RCC_SPI6CLKSOURCE_PLL2Q: /* PLL2 'Q' is the clock source for SPI6 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2QFreq(); + } + break; + case RCC_SPI6CLKSOURCE_PLL3Q: /* PLL3 'Q' is the clock source for SPI6 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_SPI6CLKSOURCE_HSI: /* HSI is the clock source for SPI6 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_SPI6CLKSOURCE_CSI: /* CSI is the clock source for SPI6 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_SPI6CLKSOURCE_HSE: /* HSE is the clock source for SPI6 */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_USART1: + clocksource = __HAL_RCC_GET_USART1_SOURCE(); + + switch (clocksource) + { + case RCC_USART1CLKSOURCE_PCLK2: /*!< PCLK2 is the clock source for USART1 */ + frequency = HAL_RCC_GetPCLK2Freq(); + break; + case RCC_USART1CLKSOURCE_PLL2Q: /*!< PLL2 'Q' is the clock source for USART1 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2QFreq(); + } + break; + case RCC_USART1CLKSOURCE_PLL3Q: /*!< PLL3 'Q' is the clock source for USART1 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_USART1CLKSOURCE_HSI: /*!< HSI is the clock source for USART1 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_USART1CLKSOURCE_CSI: /*!< CSI is the clock source for USART1 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_USART1CLKSOURCE_LSE: /*!< LSE is the clock source for USART1 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_USART234578: + clocksource = __HAL_RCC_GET_USART234578_SOURCE(); + + switch (clocksource) + { + case RCC_USART234578CLKSOURCE_PCLK1: /*!< PCLK2 is the clock source for USART234578 */ + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_USART234578CLKSOURCE_PLL2Q: /*!< PLL2 'Q' is the clock source for USART234578 */ + if (__HAL_RCC_GET_PLL2CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL2QFreq(); + } + break; + case RCC_USART234578CLKSOURCE_PLL3Q: /*!< PLL3 'Q' is the clock source for USART234578 */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_USART234578CLKSOURCE_HSI: /*!< HSI is the clock source for USART234578 */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + break; + case RCC_USART234578CLKSOURCE_CSI: /*!< CSI is the clock source for USART234578 */ + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + break; + case RCC_USART234578CLKSOURCE_LSE: /*!< LSE is the clock source for USART234578 */ + if (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + frequency = LSE_VALUE; + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_USBPHYC: + clocksource = __HAL_RCC_GET_USBPHYC_SOURCE(); + + switch (clocksource) + { + case RCC_USBPHYCCLKSOURCE_HSE: /*!< HSE is the clock source for USBPHYC */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_USBPHYCCLKSOURCE_HSE_DIV2: /*!< HSE/2 is the clock source for USBPHYC */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = (HSE_VALUE >> 1UL); + } + break; + case RCC_USBPHYCCLKSOURCE_PLL3Q: /*!< PLL3Q is the clock source for USBPHYC */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + case RCC_PERIPHCLK_USBOTGFS: + clocksource = __HAL_RCC_GET_USBOTGFS_SOURCE(); + + switch (clocksource) + { + case RCC_USBOTGFSCLKSOURCE_HSI48: /*!< HSI48 is the clock source for USBOTGFS */ + if (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) != 0U) + { + frequency = HSI48_VALUE; + } + break; + case RCC_USBOTGFSCLKSOURCE_PLL3Q: /*!< PLL3Q is the clock source for USBOTGFS */ + if (__HAL_RCC_GET_PLL3CLKOUT_CONFIG(RCC_PLL_QCLK) != 0U) + { + frequency = HAL_RCC_GetPLL3QFreq(); + } + break; + case RCC_USBOTGFSCLKSOURCE_HSE: /*!< HSE is the clock source for USBOTGFS */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + break; + case RCC_USBOTGFSCLKSOURCE_CLK48: /*!< CLK48 is the clock source for USBOTGFS */ + /* Can't retrieve this source's frequency, it is by default set to 0 */ + break; + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + break; + + default: + /* Nothing to do, frequency is by default set to 0 */ + break; + } + + return frequency; +} + +/** + * @brief Enable clock protection. + * @note When set, this prevents disabling accidentally clock related data. + * @param ProtectClk Clock(s) to enable protection on + * This parameter can be one or a combination of the following + * @arg RCC_CLOCKPROTECT_FMC FMC clock protection + * @arg RCC_CLOCKPROTECT_XSPI XSPIs clock protection + * @retval None + */ +void HAL_RCCEx_EnableClockProtection(uint32_t ProtectClk) +{ + /* Check the parameter */ + assert_param(IS_RCC_CLOCKPROTECTION(ProtectClk)); + + SET_BIT(RCC->CKPROTR, ProtectClk); +} + +/** + * @brief Disable clock protection. + * @param ProtectClk Clock(s) to disable protection on + * This parameter can be one or a combination of the following + * @arg RCC_CLOCKPROTECT_FMC FMC clock protection + * @arg RCC_CLOCKPROTECT_XSPI XSPIs clock protection + * @retval None + */ +void HAL_RCCEx_DisableClockProtection(uint32_t ProtectClk) +{ + /* Check the parameter */ + assert_param(IS_RCC_CLOCKPROTECTION(ProtectClk)); + + CLEAR_BIT(RCC->CKPROTR, ProtectClk); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended System Control functions + * @brief Extended Peripheral Control functions + * @{ + */ +/** + * @brief Enables the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @note Backup domain access should be enabled + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disables the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @note Backup domain access should be enabled + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on EXTI line 18 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 18 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); +} + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock + * @param WakeUpClk: Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the oscillator Kernel clock source for wakeup from Stop + * @param WakeUpClk: Kernel Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI oscillator selection + * @retval None + */ +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_KERWAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode. + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(const RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event. + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info. + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Wait for CRS Synchronization status. + * @param Timeout Duration of the timeout + * @note Timeout is based on the maximum time to receive a SYNC event based on synchronization + * frequency. + * @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. + * @retval Combination of Synchronization status + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_TIMEOUT + * @arg @ref RCC_CRS_SYNCOK + * @arg @ref RCC_CRS_SYNCWARN + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + */ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Compute PLL2 VCO output frequency + * @retval Value of PLL2 VCO output frequency + */ +static uint32_t RCC_GetCLKPFreq(void) +{ + uint32_t frequency = 0U; + uint32_t ckpclocksource; + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if (ckpclocksource == RCC_CLKPSOURCE_HSI) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if (READ_BIT(RCC->CR, RCC_CR_HSIDIVF) != 0U) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> RCC_CR_HSIDIV_Pos)); + } + else + { + /* Can't retrieve HSIDIV value */ + } + } + } + else if (ckpclocksource == RCC_CLKPSOURCE_CSI) + { + if (READ_BIT(RCC->CR, RCC_CR_CSIRDY) != 0U) + { + frequency = CSI_VALUE; + } + } + else if (ckpclocksource == RCC_CLKPSOURCE_HSE) + { + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + frequency = HSE_VALUE; + } + } + else + { + /* Nothing to do, case the CKPER is disabled */ + /* frequency is by default set to 0 */ + } + + return frequency; +} +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng.c new file mode 100644 index 000000000..76367f887 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng.c @@ -0,0 +1,1027 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rng.c + * @author MCD Application Team + * @brief RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization and configuration functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The RNG HAL driver can be used as follows: + + (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro + in HAL_RNG_MspInit(). + (#) Activate the RNG peripheral using HAL_RNG_Init() function. + (#) Wait until the 32 bit Random Number Generator contains a valid + random data using (polling/interrupt) mode. + (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_RNG_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_RNG_RegisterCallback() to register a user callback. + Function HAL_RNG_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_RNG_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. + HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + + [..] + For specific callback ReadyDataCallback, use dedicated register callbacks: + respectively HAL_RNG_RegisterReadyDataCallback() , HAL_RNG_UnRegisterReadyDataCallback(). + + [..] + By default, after the HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET + all callbacks are set to the corresponding weak (overridden) functions: + example HAL_RNG_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (overridden) functions in the HAL_RNG_Init() + and HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_RNG_Init() and HAL_RNG_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_RNG_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit() + or HAL_RNG_Init() function. + + [..] + When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG + * @brief RNG HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RNG_Private_Constants RNG Private Constants + * @{ + */ +#define RNG_TIMEOUT_VALUE 10U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RNG_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_Exported_Functions_Group1 + * @brief Initialization and configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the RNG according to the specified parameters + in the RNG_InitTypeDef and create the associated handle + (+) DeInitialize the RNG peripheral + (+) Initialize the RNG MSP + (+) DeInitialize RNG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RNG peripheral and creates the associated handle. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) +{ + uint32_t tickstart; + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); + assert_param(IS_RNG_CED(hrng->Init.ClockErrorDetection)); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hrng->MspInitCallback == NULL) + { + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hrng->MspInitCallback(hrng); + } +#else + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_RNG_MspInit(hrng); + } +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Disable RNG */ + __HAL_RNG_DISABLE(hrng); + + /* Clock Error Detection Configuration when CONDRT bit is set to 1 */ + MODIFY_REG(hrng->Instance->CR, RNG_CR_CED | RNG_CR_CONDRST, hrng->Init.ClockErrorDetection | RNG_CR_CONDRST); + + /* Writing bit CONDRST=0 */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for conditioning reset process to be completed */ + while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + return HAL_ERROR; + } + } + } + + /* Enable the RNG Peripheral */ + __HAL_RNG_ENABLE(hrng); + + /* verify that no seed error */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + hrng->State = HAL_RNG_STATE_ERROR; + return HAL_ERROR; + } + /* Get tick */ + tickstart = HAL_GetTick(); + /* Check if data register contains valid random data */ + while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_SECS) != RESET) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_SECS) != RESET) + { + hrng->State = HAL_RNG_STATE_ERROR; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + return HAL_ERROR; + } + } + } + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the RNG peripheral. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) +{ + uint32_t tickstart; + + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Clear Clock Error Detection bit when CONDRT bit is set to 1 */ + MODIFY_REG(hrng->Instance->CR, RNG_CR_CED | RNG_CR_CONDRST, RNG_CED_ENABLE | RNG_CR_CONDRST); + + /* Writing bit CONDRST=0 */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for conditioning reset process to be completed */ + while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + return HAL_ERROR; + } + } + } + + /* Disable the RNG Peripheral */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN); + + /* Clear RNG interrupt status flags */ + CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->MspDeInitCallback == NULL) + { + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hrng->MspDeInitCallback(hrng); +#else + /* DeInit the low level hardware */ + HAL_RNG_MspDeInit(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_RESET; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hrng); + + /* Return the function status */ + return HAL_OK; +} + +/** + * @brief Initializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RNG Callback + * To be used instead of the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, + pRNG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = pCallback; + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an RNG Callback + * RNG callback is redirected to the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register Data Ready RNG Callback + * To be used instead of the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @param pCallback pointer to the Data Ready Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = pCallback; + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief UnRegister the Data Ready RNG Callback + * Data Ready RNG Callback is redirected to the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup RNG_Exported_Functions_Group2 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get the 32 bit Random number + (+) Get the 32 bit Random number with interrupt enabled + (+) Handle RNG interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Generates a 32-bit random number. + * @note This function checks value of RNG_FLAG_DRDY flag to know if valid + * random number is available in the DR register (RNG_FLAG_DRDY flag set + * whenever a random number is available through the RNG_DR register). + * After transitioning from 0 to 1 (random number available), + * RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading + * four words from the RNG_DR register, i.e. further function calls + * will immediately return a new u32 random number (additional words are + * available and can be read by the application, till RNG_FLAG_DRDY flag remains high). + * @note When no more random number data is available in DR register, RNG_FLAG_DRDY + * flag is automatically cleared. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit pointer to generated random number variable if successful. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + /* Check if there is a seed error */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; + /* Reset from seed error */ + status = RNG_RecoverSeedError(hrng); + if (status == HAL_ERROR) + { + return status; + } + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if data register contains valid random data */ + while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + return HAL_ERROR; + } + } + } + + /* Get a 32bit Random number */ + hrng->RandomNumber = hrng->Instance->DR; + /* In case of seed error, the value available in the RNG_DR register must not + be used as it may not have enough entropy */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + /* Update the error code and status */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; + status = HAL_ERROR; + /* Clear bit DRDY */ + CLEAR_BIT(hrng->Instance->SR, RNG_FLAG_DRDY); + } + else /* No seed error */ + { + *random32bit = hrng->RandomNumber; + } + hrng->State = HAL_RNG_STATE_READY; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + return status; +} + +/** + * @brief Generates a 32-bit random number in interrupt mode. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ + __HAL_RNG_ENABLE_IT(hrng); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Handles RNG interrupt request. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User has + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). + * The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * @note In the case of a seed error, the generation of random numbers is + * interrupted as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable + * the RNG peripheral to reinitialize and restart the RNG. + * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS + * or CEIS are set. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + + */ +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) +{ + uint32_t rngclockerror = 0U; + uint32_t itflag = hrng->Instance->SR; + + /* RNG clock error interrupt occurred */ + if ((itflag & RNG_IT_CEI) == RNG_IT_CEI) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; + rngclockerror = 1U; + } + else if ((itflag & RNG_IT_SEI) == RNG_IT_SEI) + { + /* Check if Seed Error Current Status (SECS) is set */ + if ((itflag & RNG_FLAG_SECS) != RNG_FLAG_SECS) + { + /* RNG IP performed the reset automatically (auto-reset) */ + /* Clear bit SEIS */ + CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI); + } + else + { + /* Seed Error has not been recovered : Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; + rngclockerror = 1U; + /* Disable the IT */ + __HAL_RNG_DISABLE_IT(hrng); + } + } + else + { + /* Nothing to do */ + } + + if (rngclockerror == 1U) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_ERROR; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Error callback */ + hrng->ErrorCallback(hrng); +#else + /* Call legacy weak Error callback */ + HAL_RNG_ErrorCallback(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Clear the clock error flag */ + __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI); + + return; + } + + /* Check RNG data ready interrupt occurred */ + if ((itflag & RNG_IT_DRDY) == RNG_IT_DRDY) + { + /* Generate random number once, so disable the IT */ + __HAL_RNG_DISABLE_IT(hrng); + + /* Get the 32bit Random number (DRDY flag automatically cleared) */ + hrng->RandomNumber = hrng->Instance->DR; + + if (hrng->State != HAL_RNG_STATE_ERROR) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Data Ready callback */ + hrng->ReadyDataCallback(hrng, hrng->RandomNumber); +#else + /* Call legacy weak Data Ready callback */ + HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Read latest generated random number. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval random value + */ +uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng) +{ + return (hrng->RandomNumber); +} + +/** + * @brief Data Ready callback in non-blocking mode. + * @note When RNG_FLAG_DRDY flag value is set, first random number has been read + * from DR register in IRQ Handler and is provided as callback parameter. + * Depending on valid data available in the conditioning output buffer, + * additional words can be read by the application from DR register till + * DRDY bit remains high. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit generated random number. + * @retval None + */ +__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + UNUSED(random32bit); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ReadyDataCallback must be implemented in the user file. + */ +} + +/** + * @brief RNG error callbacks. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ErrorCallback must be implemented in the user file. + */ +} +/** + * @} + */ + + +/** @addtogroup RNG_Exported_Functions_Group3 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the RNG state. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL state + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng) +{ + return hrng->State; +} + +/** + * @brief Return the RNG handle error code. + * @param hrng: pointer to a RNG_HandleTypeDef structure. + * @retval RNG Error Code + */ +uint32_t HAL_RNG_GetError(const RNG_HandleTypeDef *hrng) +{ + /* Return RNG Error Code */ + return hrng->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup RNG_Private_Functions + * @{ + */ + +/** + * @brief RNG sequence to recover from a seed error + * @param hrng pointer to a RNG_HandleTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef RNG_RecoverSeedError(RNG_HandleTypeDef *hrng) +{ + __IO uint32_t count = 0U; + + /*Check if seed error current status (SECS)is set */ + if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_SECS) == RESET) + { + /* RNG performed the reset automatically (auto-reset) */ + /* Clear bit SEIS */ + CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI); + } + else /* Sequence to fully recover from a seed error*/ + { + /* Writing bit CONDRST=1*/ + SET_BIT(hrng->Instance->CR, RNG_CR_CONDRST); + /* Writing bit CONDRST=0*/ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST); + + /* Wait for conditioning reset process to be completed */ + count = RNG_TIMEOUT_VALUE; + do + { + count-- ; + if (count == 0U) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode |= HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Error callback */ + hrng->ErrorCallback(hrng); +#else + /* Call legacy weak Error callback */ + HAL_RNG_ErrorCallback(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + return HAL_ERROR; + } + } while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)); + + if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + /* Clear bit SEIS */ + CLEAR_BIT(hrng->Instance->SR, RNG_IT_SEI); + } + + /* Wait for SECS to be cleared */ + count = RNG_TIMEOUT_VALUE; + do + { + count-- ; + if (count == 0U) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode |= HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Error callback */ + hrng->ErrorCallback(hrng); +#else + /* Call legacy weak Error callback */ + HAL_RNG_ErrorCallback(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + return HAL_ERROR; + } + } while (HAL_IS_BIT_SET(hrng->Instance->SR, RNG_FLAG_SECS)); + } + /* Update the error code */ + hrng->ErrorCode &= ~ HAL_RNG_ERROR_SEED; + return HAL_OK; +} + +/** + * @} + */ + + +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng_ex.c new file mode 100644 index 000000000..26b2ce0aa --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rng_ex.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rng_ex.c + * @author MCD Application Team + * @brief Extended RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Lock configuration functions + * + Reset the RNG + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#if defined(RNG) + +/** @addtogroup RNG_Ex + * @brief RNG Extended HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED +#if defined(RNG_CR_CONDRST) +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RNG_Ex_Private_Constants + * @{ + */ +#define RNG_TIMEOUT_VALUE 2U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RNG_Ex_Exported_Functions RNG_Ex Exported Functions + * @{ + */ + +/** @defgroup RNG_Ex_Exported_Functions_Group1 Configuration and lock functions + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration and lock functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the RNG with the specified parameters in the RNG_ConfigTypeDef + (+) Lock RNG configuration Allows user to lock a configuration until next reset. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the RNG with the specified parameters in the + * RNG_ConfigTypeDef. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param pConf pointer to a RNG_ConfigTypeDef structure that contains + * the configuration information for RNG module + + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNGEx_SetConfig(RNG_HandleTypeDef *hrng, const RNG_ConfigTypeDef *pConf) +{ + uint32_t tickstart; + uint32_t cr_value; + HAL_StatusTypeDef status ; + + /* Check the RNG handle allocation */ + if ((hrng == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); + assert_param(IS_RNG_CLOCK_DIVIDER(pConf->ClockDivider)); + assert_param(IS_RNG_NIST_COMPLIANCE(pConf->NistCompliance)); + assert_param(IS_RNG_CONFIG1(pConf->Config1)); + assert_param(IS_RNG_CONFIG2(pConf->Config2)); + assert_param(IS_RNG_CONFIG3(pConf->Config3)); + assert_param(IS_RNG_ARDIS(pConf->AutoReset)); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Disable RNG */ + __HAL_RNG_DISABLE(hrng); + + /* RNG CR register configuration. Set value in CR register for : + - NIST Compliance setting + - Clock divider value + - Automatic reset to clear SECS bit + - CONFIG 1, CONFIG 2 and CONFIG 3 values */ + cr_value = (uint32_t)(pConf->ClockDivider | pConf->NistCompliance | pConf->AutoReset + | (pConf->Config1 << RNG_CR_RNG_CONFIG1_Pos) + | (pConf->Config2 << RNG_CR_RNG_CONFIG2_Pos) + | (pConf->Config3 << RNG_CR_RNG_CONFIG3_Pos)); + + MODIFY_REG(hrng->Instance->CR, RNG_CR_NISTC | RNG_CR_CLKDIV | RNG_CR_RNG_CONFIG1 + | RNG_CR_RNG_CONFIG2 | RNG_CR_RNG_CONFIG3 | RNG_CR_ARDIS, + (uint32_t)(RNG_CR_CONDRST | cr_value)); + + /* RNG health test control in accordance with NIST */ + WRITE_REG(hrng->Instance->HTCR, pConf->HealthTest); + + /* Writing bit CONDRST=0*/ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_CONDRST); + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for conditioning reset process to be completed */ + while (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of prememption */ + if (HAL_IS_BIT_SET(hrng->Instance->CR, RNG_CR_CONDRST)) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + return HAL_ERROR; + } + } + } + + /* Enable RNG */ + __HAL_RNG_ENABLE(hrng); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* function status */ + status = HAL_OK; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return the function status */ + return status; +} + +/** + * @brief Get the RNG Configuration and fill parameters in the + * RNG_ConfigTypeDef. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param pConf pointer to a RNG_ConfigTypeDef structure that contains + * the configuration information for RNG module + + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNGEx_GetConfig(RNG_HandleTypeDef *hrng, RNG_ConfigTypeDef *pConf) +{ + + HAL_StatusTypeDef status ; + + /* Check the RNG handle allocation */ + if ((hrng == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get RNG parameters */ + pConf->Config1 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG1) >> RNG_CR_RNG_CONFIG1_Pos) ; + pConf->Config2 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG2) >> RNG_CR_RNG_CONFIG2_Pos); + pConf->Config3 = (uint32_t)((hrng->Instance->CR & RNG_CR_RNG_CONFIG3) >> RNG_CR_RNG_CONFIG3_Pos); + pConf->ClockDivider = (hrng->Instance->CR & RNG_CR_CLKDIV); + pConf->NistCompliance = (hrng->Instance->CR & RNG_CR_NISTC); + pConf->AutoReset = (hrng->Instance->CR & RNG_CR_ARDIS); + pConf->HealthTest = (hrng->Instance->HTCR); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* function status */ + status = HAL_OK; + } + else + { + hrng->ErrorCode |= HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return the function status */ + return status; +} + +/** + * @brief RNG current configuration lock. + * @note This function allows to lock RNG peripheral configuration. + * Once locked, HW RNG reset has to be performed prior any further + * configuration update. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNGEx_LockConfig(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status; + + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Perform RNG configuration Lock */ + MODIFY_REG(hrng->Instance->CR, RNG_CR_CONFIGLOCK, RNG_CR_CONFIGLOCK); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_READY; + + /* function status */ + status = HAL_OK; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return the function status */ + return status; +} + + +/** + * @} + */ + +/** @defgroup RNG_Ex_Exported_Functions_Group2 Recover from seed error function + * @brief Recover from seed error function + * +@verbatim + =============================================================================== + ##### Recover from seed error function ##### + =============================================================================== + [..] This section provide function allowing to: + (+) Recover from a seed error + +@endverbatim + * @{ + */ + +/** + * @brief RNG sequence to recover from a seed error + * @param hrng: pointer to a RNG_HandleTypeDef structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNGEx_RecoverSeedError(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status; + + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* sequence to fully recover from a seed error */ + status = RNG_RecoverSeedError(hrng); + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return the function status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG_CR_CONDRST */ +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc.c new file mode 100644 index 000000000..13b2a89e0 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc.c @@ -0,0 +1,2270 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization/de-initialization functions + * + Calendar (Time and Date) configuration + * + Alarms (Alarm A and Alarm B) configuration + * + WakeUp Timer configuration + * + TimeStamp configuration + * + Tampers configuration + * + Backup Data Registers configuration + * + RTC Tamper and TimeStamp Pins Selection + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### RTC Operating Condition ##### + =============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + ##### Backup Domain Reset ##### + =============================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR register + to their reset values. + A backup domain reset is generated when one of the following events occurs: + (#) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). + (#) VDD or VBAT power on, if both supplies have previously been powered off. + (#) Tamper detection event resets all data backup registers. + + ##### Backup Domain Access ##### + ================================================================== + [..] After reset, the backup domain (RTC registers and RTC backup data registers) + is protected against possible unwanted write accesses. + [..] To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + (+) Call the function HAL_RCCEx_PeriphCLKConfig with RCC_PERIPHCLK_RTC for + PeriphClockSelection and select RTCClockSelection (LSE, LSI or HSEdiv32) + (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function. + + ##### How to use RTC Driver ##### + =================================================================== + [..] + (+) Enable the RTC domain access (see description in the section above). + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the + HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), + RTC wakeup, RTC tamper event detection and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm + or the RTC wakeup events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock source + is LSE or LSI. + + *** Callback registration *** + ============================================= + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. This is the recommended configuration + in order to optimize memory/code consumption footprint/performances. + + The compilation define USE_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_RTC_RegisterCallback() to register an interrupt callback. + + Function HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) SSRUEventCallback : RTC SSRU Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) Tamper2EventCallback : RTC Tamper 2 Event callback. + (+) Tamper3EventCallback : RTC Tamper 3 Event callback. + (+) Tamper4EventCallback : RTC Tamper 4 Event callback. + (+) Tamper5EventCallback : RTC Tamper 5 Event callback. + (+) Tamper6EventCallback : RTC Tamper 6 Event callback. + (+) Tamper7EventCallback : RTC Tamper 7 Event callback. + (+) Tamper8EventCallback : RTC Tamper 8 Event callback. + (+) InternalTamper1EventCallback : RTC InternalTamper 1 Event callback. + (+) InternalTamper2EventCallback : RTC InternalTamper 2 Event callback. + (+) InternalTamper3EventCallback : RTC InternalTamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC InternalTamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC InternalTamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC InternalTamper 6 Event callback. + (+) InternalTamper7EventCallback : RTC InternalTamper 7 Event callback. + (+) InternalTamper8EventCallback : RTC InternalTamper 8 Event callback. + (+) InternalTamper9EventCallback : RTC InternalTamper 9 Event callback. + (+) InternalTamper11EventCallback : RTC InternalTamper 11 Event callback. + (+) InternalTamper15EventCallback : RTC InternalTamper 15 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) AlarmBEventCallback : RTC Alarm B Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) SSRUEventCallback : RTC SSRU Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) Tamper2EventCallback : RTC Tamper 2 Event callback. + (+) Tamper3EventCallback : RTC Tamper 3 Event callback. + (+) Tamper4EventCallback : RTC Tamper 4 Event callback. + (+) Tamper5EventCallback : RTC Tamper 5 Event callback. + (+) Tamper6EventCallback : RTC Tamper 6 Event callback. + (+) Tamper7EventCallback : RTC Tamper 7 Event callback. + (+) Tamper8EventCallback : RTC Tamper 8 Event callback. + (+) InternalTamper1EventCallback : RTC InternalTamper 1 Event callback. + (+) InternalTamper2EventCallback : RTC InternalTamper 2 Event callback. + (+) InternalTamper3EventCallback : RTC InternalTamper 3 Event callback. + (+) InternalTamper4EventCallback : RTC InternalTamper 4 Event callback. + (+) InternalTamper5EventCallback : RTC InternalTamper 5 Event callback. + (+) InternalTamper6EventCallback : RTC InternalTamper 6 Event callback. + (+) InternalTamper7EventCallback : RTC InternalTamper 7 Event callback. + (+) InternalTamper8EventCallback : RTC InternalTamper 8 Event callback. + (+) InternalTamper9EventCallback : RTC InternalTamper 9 Event callback. + (+) InternalTamper11EventCallback : RTC InternalTamper 11 Event callback. + (+) InternalTamper15EventCallback : RTC InternalTamper 15 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + + By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions : + examples AlarmAEventCallback(), TimeStampEventCallback(). + Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function + in the HAL_RTC_Init()/HAL_RTC_DeInit() only when these callbacks are null + (not registered beforehand). + If not, MspInit or MspDeInit are not null, HAL_RTC_Init()/HAL_RTC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit() + or HAL_RTC_Init() function. + + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + + +/** @addtogroup RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers. The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RTC peripheral + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the RTC peripheral state */ + if (hrtc != NULL) + { + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); +#if defined(RTC_CR_OSEL) + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + assert_param(IS_RTC_OUTPUT_PULLUP(hrtc->Init.OutPutPullUp)); +#endif /* RTC_CR_OSEL */ +#if defined(RTC_CR_OUT2EN) + assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap)); +#endif /* RTC_CR_OUT2EN */ + assert_param(IS_RTC_BINARY_MODE(hrtc->Init.BinMode)); + assert_param(IS_RTC_BINARY_MIX_BCDU(hrtc->Init.BinMixBcdU)); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Legacy weak AlarmAEventCallback */ + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; + /* Legacy weak AlarmBEventCallback */ + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; + /* Legacy weak TimeStampEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; + /* Legacy weak WakeUpTimerEventCallback */ + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; + /* Legacy weak SSRUEventCallback */ + hrtc->SSRUEventCallback = HAL_RTCEx_SSRUEventCallback; + /* Legacy weak Tamper1EventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; + /* Legacy weak Tamper2EventCallback */ + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; + /* Legacy weak Tamper3EventCallback */ + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; + /* Legacy weak Tamper4EventCallback */ + hrtc->Tamper4EventCallback = HAL_RTCEx_Tamper4EventCallback; + /* Legacy weak Tamper5EventCallback */ + hrtc->Tamper5EventCallback = HAL_RTCEx_Tamper5EventCallback; + /* Legacy weak Tamper6EventCallback */ + hrtc->Tamper6EventCallback = HAL_RTCEx_Tamper6EventCallback; + /* Legacy weak Tamper7EventCallback */ + hrtc->Tamper7EventCallback = HAL_RTCEx_Tamper7EventCallback; + /* Legacy weak Tamper8EventCallback */ + hrtc->Tamper8EventCallback = HAL_RTCEx_Tamper8EventCallback; + /* Legacy weak InternalTamper1EventCallback */ + hrtc->InternalTamper1EventCallback = HAL_RTCEx_InternalTamper1EventCallback; + /* Legacy weak InternalTamper2EventCallback */ + hrtc->InternalTamper2EventCallback = HAL_RTCEx_InternalTamper2EventCallback; + /* Legacy weak InternalTamper3EventCallback */ + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; + /* Legacy weak InternalTamper4EventCallback */ + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; + /* Legacy weak InternalTamper5EventCallback */ + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; + /* Legacy weak InternalTamper6EventCallback */ + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; + /* Legacy weak InternalTamper7EventCallback */ + hrtc->InternalTamper7EventCallback = HAL_RTCEx_InternalTamper7EventCallback; + /* Legacy weak InternalTamper8EventCallback */ + hrtc->InternalTamper8EventCallback = HAL_RTCEx_InternalTamper8EventCallback; + /* Legacy weak InternalTamper9EventCallback */ + hrtc->InternalTamper9EventCallback = HAL_RTCEx_InternalTamper9EventCallback; + /* Legacy weak InternalTamper11EventCallback */ + hrtc->InternalTamper11EventCallback = HAL_RTCEx_InternalTamper11EventCallback; + /* Legacy weak InternalTamper15EventCallback */ + hrtc->InternalTamper15EventCallback = HAL_RTCEx_InternalTamper15EventCallback; + + if (hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + } +#else + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); + } +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Check if the calendar has been not initialized */ + if (__HAL_RTC_IS_CALENDAR_INITIALIZED(hrtc) == 0U) + { + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { +#if defined(RTC_CR_OSEL) + /* Clear RTC_CR FMT, OSEL and POL Bits */ + CLEAR_BIT(RTC->CR, (RTC_CR_FMT | RTC_CR_POL | RTC_CR_OSEL | RTC_CR_TAMPOE)); + + /* Set RTC_CR register */ + SET_BIT(RTC->CR, (hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity)); +#else + /* Clear RTC_CR FMT Bits */ + CLEAR_BIT(RTC->CR, RTC_CR_FMT); + + /* Set RTC_CR register */ + SET_BIT(RTC->CR, hrtc->Init.HourFormat); +#endif /* RTC_CR_OSEL */ + + /* Configure the RTC PRER */ + WRITE_REG(RTC->PRER, ((hrtc->Init.SynchPrediv) | (hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos))); + + /* Configure the Binary mode */ + MODIFY_REG(RTC->ICSR, RTC_ICSR_BIN | RTC_ICSR_BCDU, hrtc->Init.BinMode | hrtc->Init.BinMixBcdU); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + +#if defined(RTC_CR_OSEL) + if (status == HAL_OK) + { +#if defined(RTC_CR_OUT2EN) + MODIFY_REG(RTC->CR, \ + RTC_CR_TAMPALRM_PU | RTC_CR_TAMPALRM_TYPE | RTC_CR_OUT2EN, \ + hrtc->Init.OutPutPullUp | hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); +#else + MODIFY_REG(RTC->CR, \ + RTC_CR_TAMPALRM_PU | RTC_CR_TAMPALRM_TYPE, \ + hrtc->Init.OutPutPullUp | hrtc->Init.OutPutType); +#endif /* RTC_CR_OUT2EN */ + } +#endif /* RTC_CR_OSEL */ + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + } + else + { + /* Calendar is already initialized */ + /* Set flag to OK */ + status = HAL_OK; + } + + if (status == HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the RTC peripheral. + * @note This function does not reset the RTC Backup Data registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t tickstart; + + /* Check RTC handler */ + if (hrtc != NULL) + { + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Reset All CR bits except CR[2:0] (which cannot be written before bit + WUTE of CR is cleared) */ + CLEAR_REG(RTC->CR); + + /* Reset TR and DR registers */ + WRITE_REG(RTC->DR, (uint32_t)(RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + CLEAR_REG(RTC->TR); + + /* Reset other RTC registers */ + WRITE_REG(RTC->PRER, ((uint32_t)(RTC_PRER_PREDIV_A | 0xFFU))); + CLEAR_REG(RTC->ALRMAR); + CLEAR_REG(RTC->ALRMBR); + CLEAR_REG(RTC->SHIFTR); + CLEAR_REG(RTC->CALR); + CLEAR_REG(RTC->ALRMASSR); + CLEAR_REG(RTC->ALRMBSSR); + CLEAR_BIT(RTC->ICSR, (RTC_ICSR_BCDU_Msk | RTC_ICSR_BIN_Msk)); + WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSOVF | RTC_SCR_CTSF | RTC_SCR_CWUTF | RTC_SCR_CALRBF | \ + RTC_SCR_CALRAF); +#if defined (RTC_PRIVCFGR_ALRAPRIV) + CLEAR_REG(RTC->PRIVCFGR); +#endif /* RTC_PRIVCFGR_ALRAPRIV */ + + /* Exit initialization mode */ + status = RTC_ExitInitMode(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + + if (status == HAL_OK) + { + /* Wait till WUTWF is set (to be able to reset CR[2:0] and WUTR) and if + timeout is reached exit */ + tickstart = HAL_GetTick(); + + while ((((hrtc->Instance->ICSR) & RTC_ICSR_WUTWF) == 0U) && (status != HAL_TIMEOUT)) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + else + { + break; + } + } + } + + /* Reset RTC CR register bits [2:0] */ + CLEAR_REG(RTC->CR); + + /* Reset RTC WUTR register */ + WRITE_REG(RTC->WUTR, RTC_WUTR_WUT); + + /* Reset TAMP registers */ + CLEAR_REG(TAMP->CR1); + CLEAR_REG(TAMP->CR2); + CLEAR_REG(TAMP->CR3); + CLEAR_REG(TAMP->FLTCR); + WRITE_REG(TAMP->ATCR1, TAMP_ATCR1_ATCKSEL); + CLEAR_REG(TAMP->ATOR); + CLEAR_REG(TAMP->ATCR2); + CLEAR_REG(TAMP->PRIVCFGR); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); + +#else + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + } + } + + return status; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_SSRU_EVENT_CB_ID SSRU Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID + * @arg @ref HAL_RTC_TAMPER4_EVENT_CB_ID Tamper 4 Callback ID + * @arg @ref HAL_RTC_TAMPER5_EVENT_CB_ID Tamper 5 Callback ID + * @arg @ref HAL_RTC_TAMPER6_EVENT_CB_ID Tamper 6 Callback ID + * @arg @ref HAL_RTC_TAMPER7_EVENT_CB_ID Tamper 7 Callback ID + * @arg @ref HAL_RTC_TAMPER8_EVENT_CB_ID Tamper 8 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER1_EVENT_CB_ID Internal Tamper 1 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER2_EVENT_CB_ID Internal Tamper 2 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER7_EVENT_CB_ID Internal Tamper 7 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER8_EVENT_CB_ID Internal Tamper 8 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER9_EVENT_CB_ID Internal Tamper 9 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER11_EVENT_CB_ID Internal Tamper 11 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER15_EVENT_CB_ID Internal Tamper 15 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @note The HAL_RTC_RegisterCallback() may be called before HAL_RTC_Init() in HAL_RTC_STATE_RESET + * to register callbacks for HAL_RTC_MSPINIT_CB_ID and HAL_RTC_MSPDEINIT_CB_ID. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, + pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + hrtc->AlarmBEventCallback = pCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = pCallback; + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = pCallback; + break; + + case HAL_RTC_SSRU_EVENT_CB_ID : + hrtc->SSRUEventCallback = pCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + hrtc->Tamper2EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER3_EVENT_CB_ID : + hrtc->Tamper3EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER4_EVENT_CB_ID : + hrtc->Tamper4EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER5_EVENT_CB_ID : + hrtc->Tamper5EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER6_EVENT_CB_ID : + hrtc->Tamper6EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER7_EVENT_CB_ID : + hrtc->Tamper7EventCallback = pCallback; + break; + + case HAL_RTC_TAMPER8_EVENT_CB_ID : + hrtc->Tamper8EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER1_EVENT_CB_ID : + hrtc->InternalTamper1EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER2_EVENT_CB_ID : + hrtc->InternalTamper2EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + hrtc->InternalTamper3EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + hrtc->InternalTamper4EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + hrtc->InternalTamper5EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + hrtc->InternalTamper6EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER7_EVENT_CB_ID : + hrtc->InternalTamper7EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER8_EVENT_CB_ID : + hrtc->InternalTamper8EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER9_EVENT_CB_ID : + hrtc->InternalTamper9EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER11_EVENT_CB_ID : + hrtc->InternalTamper11EventCallback = pCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER15_EVENT_CB_ID : + hrtc->InternalTamper15EventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an RTC Callback + * RTC callback is redirected to the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_SSRU_EVENT_CB_ID SSRU Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID + * @arg @ref HAL_RTC_TAMPER4_EVENT_CB_ID Tamper 4 Callback ID + * @arg @ref HAL_RTC_TAMPER5_EVENT_CB_ID Tamper 5 Callback ID + * @arg @ref HAL_RTC_TAMPER6_EVENT_CB_ID Tamper 6 Callback ID + * @arg @ref HAL_RTC_TAMPER7_EVENT_CB_ID Tamper 7 Callback ID + * @arg @ref HAL_RTC_TAMPER8_EVENT_CB_ID Tamper 8 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER1_EVENT_CB_ID Internal Tamper 1 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER2_EVENT_CB_ID Internal Tamper 2 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID Internal Tamper 3 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID Internal Tamper 4 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID Internal Tamper 5 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID Internal Tamper 6 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER7_EVENT_CB_ID Internal Tamper 7 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER8_EVENT_CB_ID Internal Tamper 8 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER9_EVENT_CB_ID Internal Tamper 9 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER11_EVENT_CB_ID Internal Tamper 11 Callback ID + * @arg @ref HAL_RTC_INTERNAL_TAMPER15_EVENT_CB_ID Internal Tamper 15 Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @note The HAL_RTC_UnRegisterCallback() may be called before HAL_RTC_Init() in HAL_RTC_STATE_RESET + * to un-register callbacks for HAL_RTC_MSPINIT_CB_ID and HAL_RTC_MSPDEINIT_CB_ID. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + /* Legacy weak AlarmAEventCallback */ + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; + break; + + case HAL_RTC_ALARM_B_EVENT_CB_ID : + /* Legacy weak AlarmBEventCallback */ + hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + /* Legacy weak TimeStampEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + /* Legacy weak WakeUpTimerEventCallback */ + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; + break; + + case HAL_RTC_SSRU_EVENT_CB_ID : + /* Legacy weak SSRUEventCallback */ + hrtc->SSRUEventCallback = HAL_RTCEx_SSRUEventCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + /* Legacy weak Tamper1EventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; + break; + + case HAL_RTC_TAMPER2_EVENT_CB_ID : + /* Legacy weak Tamper2EventCallback */ + hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; + break; + + case HAL_RTC_TAMPER3_EVENT_CB_ID : + /* Legacy weak Tamper3EventCallback */ + hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; + break; + + case HAL_RTC_TAMPER4_EVENT_CB_ID : + /* Legacy weak Tamper4EventCallback */ + hrtc->Tamper4EventCallback = HAL_RTCEx_Tamper4EventCallback; + break; + + case HAL_RTC_TAMPER5_EVENT_CB_ID : + /* Legacy weak Tamper5EventCallback */ + hrtc->Tamper5EventCallback = HAL_RTCEx_Tamper5EventCallback; + break; + + case HAL_RTC_TAMPER6_EVENT_CB_ID : + /* Legacy weak Tamper6EventCallback */ + hrtc->Tamper6EventCallback = HAL_RTCEx_Tamper6EventCallback; + break; + + case HAL_RTC_TAMPER7_EVENT_CB_ID : + /* Legacy weak Tamper7EventCallback */ + hrtc->Tamper7EventCallback = HAL_RTCEx_Tamper7EventCallback; + break; + + case HAL_RTC_TAMPER8_EVENT_CB_ID : + /* Legacy weak Tamper8EventCallback */ + hrtc->Tamper8EventCallback = HAL_RTCEx_Tamper8EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER1_EVENT_CB_ID : + /* Legacy weak InternalTamper1EventCallback */ + hrtc->InternalTamper1EventCallback = HAL_RTCEx_InternalTamper1EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER2_EVENT_CB_ID : + /* Legacy weak InternalTamper2EventCallback */ + hrtc->InternalTamper2EventCallback = HAL_RTCEx_InternalTamper2EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID : + /* Legacy weak InternalTamper3EventCallback */ + hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID : + /* Legacy weak InternalTamper4EventCallback */ + hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID : + /* Legacy weak InternalTamper5EventCallback */ + hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER6_EVENT_CB_ID : + /* Legacy weak InternalTamper6EventCallback */ + hrtc->InternalTamper6EventCallback = HAL_RTCEx_InternalTamper6EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER7_EVENT_CB_ID : + /* Legacy weak InternalTamper7EventCallback */ + hrtc->InternalTamper7EventCallback = HAL_RTCEx_InternalTamper7EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER8_EVENT_CB_ID : + /* Legacy weak InternalTamper8EventCallback */ + hrtc->InternalTamper8EventCallback = HAL_RTCEx_InternalTamper8EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER9_EVENT_CB_ID : + /* Legacy weak InternalTamper9EventCallback */ + hrtc->InternalTamper9EventCallback = HAL_RTCEx_InternalTamper9EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER11_EVENT_CB_ID : + /* Legacy weak InternalTamper11EventCallback */ + hrtc->InternalTamper11EventCallback = HAL_RTCEx_InternalTamper11EventCallback; + break; + + case HAL_RTC_INTERNAL_TAMPER15_EVENT_CB_ID : + /* Legacy weak InternalTamper15EventCallback */ + hrtc->InternalTamper15EventCallback = HAL_RTCEx_InternalTamper15EventCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Set RTC current time. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure + * if Binary mode is RTC_BINARY_ONLY, this parameter is not used and RTC_SSR will be automatically + * reset to 0xFFFFFFFF + * else sTime->SubSeconds is not used and RTC_SSR will be automatically reset to the + * A 7-bit async prescaler (RTC_PRER_PREDIV_A) + * @param Format Format of sTime->Hours, sTime->Minutes and sTime->Seconds. + * if Binary mode is RTC_BINARY_ONLY, this parameter is not used + * else this parameter can be one of the following values + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + HAL_StatusTypeDef status; + +#ifdef USE_FULL_ASSERT + /* Check the parameters depending of the Binary mode with 32-bit free-running counter configuration */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) == RTC_BINARY_NONE) + { + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + } +#endif /* USE_FULL_ASSERT */ + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Check Binary mode ((32-bit free-running counter) */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) != RTC_BINARY_ONLY) + { + if (Format == RTC_FORMAT_BIN) + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Seconds) << RTC_TR_SU_Pos) | \ + (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + else + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)(sTime->Seconds) << RTC_TR_SU_Pos) | \ + ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + + /* Set the RTC_TR register */ + WRITE_REG(RTC->TR, (tmpreg & RTC_TR_RESERVED_MASK)); + + /* Clear the bits to be configured */ + CLEAR_BIT(RTC->CR, RTC_CR_BKP); + } + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current time. + * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds + * value in second fraction ratio with time unit following generic formula: + * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read + * to ensure consistency between the time and date values. + * @param hrtc RTC handle + * @param sTime + * if Binary mode is RTC_BINARY_ONLY, sTime->SubSeconds only is updated + * else + * Pointer to Time structure with Hours, Minutes and Seconds fields returned + * with input format (BIN or BCD), also SubSeconds field returning the + * RTC_SSR register content and SecondFraction field the Synchronous pre-scaler + * factor to be used for second fraction ratio computation. + * @param Format Format of sTime->Hours, sTime->Minutes and sTime->Seconds. + * if Binary mode is RTC_BINARY_ONLY, this parameter is not used + * else this parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(const RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Get subseconds structure field from the corresponding register */ + sTime->SubSeconds = READ_REG(RTC->SSR); + + if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) != RTC_BINARY_ONLY) + { + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get SecondFraction structure field from the corresponding register field */ + sTime->SecondFraction = (uint32_t)(READ_REG(RTC->PRER) & RTC_PRER_PREDIV_S); + + /* Get the TR register */ + tmpreg = (uint32_t)(READ_REG(RTC->TR) & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); + sTime->Seconds = (uint8_t)((tmpreg & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + } + + return HAL_OK; +} + +/** + * @brief Set RTC current date. + * @param hrtc RTC handle + * @param sDate Pointer to date structure + * @param Format Format of sDate->Year, sDate->Month and sDate->Weekday. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date) << RTC_DR_DU_Pos) | \ + ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ + (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ + (((uint32_t)sDate->Date) << RTC_DR_DU_Pos) | \ + (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Set the RTC_DR register */ + WRITE_REG(RTC->DR, (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK)); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current date. + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read. + * @param hrtc RTC handle + * @param sDate Pointer to Date structure + * @param Format Format of sDate->Year, sDate->Month and sDate->Weekday. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(const RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(READ_REG(RTC->DR) & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); + sDate->Date = (uint8_t)((datetmpreg & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @brief Daylight Saving Time, Add one hour to the calendar in one single operation + * without going through the initialization procedure. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_Add1Hour(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set RTC_CR_ADD1H Bit */ + SET_BIT(RTC->CR, RTC_CR_ADD1H); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Subtract one hour from the calendar in one + * single operation without going through the initialization procedure. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_Sub1Hour(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set RTC_CR_SUB1H Bit */ + SET_BIT(RTC->CR, RTC_CR_SUB1H); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, Set the store operation bit. + * @note It can be used by the software in order to memorize the DST status. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_SetStoreOperation(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Set RTC_CR_BKP Bit */ + SET_BIT(RTC->CR, RTC_CR_BKP); +} + +/** + * @brief Daylight Saving Time, Clear the store operation bit. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_DST_ClearStoreOperation(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Clear RTC_CR_BKP Bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BKP); +} + +/** + * @brief Daylight Saving Time, Read the store operation bit. + * @param hrtc RTC handle + * @retval operation see RTC_StoreOperation_Definitions + */ +uint32_t HAL_RTC_DST_ReadStoreOperation(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Get RTC_CR_BKP Bit */ + return READ_BIT(RTC->CR, RTC_CR_BKP); +} + + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ +/** + * @brief Set the specified RTC Alarm. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * if Binary mode is RTC_BINARY_ONLY, 3 fields only are used + * sAlarm->AlarmTime.SubSeconds + * sAlarm->AlarmSubSecondMask + * sAlarm->BinaryAutoClr + * @param Format of the entered parameters. + * if Binary mode is RTC_BINARY_ONLY, this parameter is not used + * else this parameter can be one of the following values + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tmpreg = 0; + uint32_t binary_mode; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + +#ifdef USE_FULL_ASSERT + /* Check the parameters depending of the Binary mode (32-bit free-running counter configuration) */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) == RTC_BINARY_NONE) + { + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + } + else if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) == RTC_BINARY_ONLY) + { + assert_param(IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(sAlarm->AlarmSubSecondMask)); + assert_param(IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(sAlarm->BinaryAutoClr)); + } + else /* RTC_BINARY_MIX */ + { + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + /* In Binary Mix Mode, the RTC can not generate an alarm on a match + involving all calendar items + the upper SSR bits */ + assert_param((sAlarm->AlarmSubSecondMask >> RTC_ALRMASSR_MASKSS_Pos) <= + (8U + (READ_BIT(RTC->ICSR, RTC_ICSR_BCDU) >> RTC_ICSR_BCDU_Pos))); + } +#endif /* USE_FULL_ASSERT */ + + /* Get Binary mode (32-bit free-running counter configuration) */ + binary_mode = READ_BIT(RTC->ICSR, RTC_ICSR_BIN); + + if (binary_mode != RTC_BINARY_ONLY) + { + if (Format == RTC_FORMAT_BIN) + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else /* format BCD */ + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + +#ifdef USE_FULL_ASSERT + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + +#endif /* USE_FULL_ASSERT */ + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + } + + /* Configure the Alarm register */ + if (sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + + /* In case of interrupt mode is used, the interrupt source must disabled */ + CLEAR_BIT(RTC->CR, (RTC_CR_ALRAE | RTC_CR_ALRAIE)); + + /* Clear flag alarm A */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRAF); + + if (binary_mode == RTC_BINARY_ONLY) + { + WRITE_REG(RTC->ALRMASSR, sAlarm->AlarmSubSecondMask | sAlarm->BinaryAutoClr); + } + else + { + WRITE_REG(RTC->ALRMAR, tmpreg); + WRITE_REG(RTC->ALRMASSR, sAlarm->AlarmSubSecondMask); + } + + WRITE_REG(RTC->ALRABINR, sAlarm->AlarmTime.SubSeconds); + + if (sAlarm->FlagAutoClr == ALARM_FLAG_AUTOCLR_ENABLE) + { + /* Configure the Alarm A output clear */ + SET_BIT(RTC->CR, RTC_CR_ALRAFCLR); + } + else + { + /* Disable the Alarm A output clear */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRAFCLR); + } + /* Configure the Alarm state: Enable Alarm */ + SET_BIT(RTC->CR, RTC_CR_ALRAE); + } + else + { + /* Disable the Alarm B interrupt */ + + /* In case of interrupt mode is used, the interrupt source must disabled */ + CLEAR_BIT(RTC->CR, (RTC_CR_ALRBE | RTC_CR_ALRBIE)); + + /* Clear flag alarm B */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRBF); + + if (binary_mode == RTC_BINARY_ONLY) + { + WRITE_REG(RTC->ALRMBSSR, sAlarm->AlarmSubSecondMask | sAlarm->BinaryAutoClr); + } + else + { + WRITE_REG(RTC->ALRMBR, tmpreg); + + WRITE_REG(RTC->ALRMBSSR, sAlarm->AlarmSubSecondMask); + } + + WRITE_REG(RTC->ALRBBINR, sAlarm->AlarmTime.SubSeconds); + + if (sAlarm->FlagAutoClr == ALARM_FLAG_AUTOCLR_ENABLE) + { + /* Configure the Alarm B output clear */ + SET_BIT(RTC->CR, RTC_CR_ALRBFCLR); + } + else + { + /* Disable the Alarm B output clear */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRBFCLR); + } + + /* Configure the Alarm state: Enable Alarm */ + SET_BIT(RTC->CR, RTC_CR_ALRBE); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set the specified RTC Alarm with Interrupt. + * @note The application must ensure that the EXTI RTC interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * if Binary mode is RTC_BINARY_ONLY, 3 fields only are used + * sAlarm->AlarmTime.SubSeconds + * sAlarm->AlarmSubSecondMask + * sAlarm->BinaryAutoClr + * @param Format Specifies the format of the entered parameters. + * if Binary mode is RTC_BINARY_ONLY, this parameter is not used + * else this parameter can be one of the following values + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tmpreg = 0; + uint32_t binary_mode; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + +#ifdef USE_FULL_ASSERT + /* Check the parameters depending of the Binary mode (32-bit free-running counter configuration) */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) == RTC_BINARY_NONE) + { + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + } + else if (READ_BIT(RTC->ICSR, RTC_ICSR_BIN) == RTC_BINARY_ONLY) + { + assert_param(IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(sAlarm->AlarmSubSecondMask)); + assert_param(IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(sAlarm->BinaryAutoClr)); + } + else /* RTC_BINARY_MIX */ + { + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + /* In Binary Mix Mode, the RTC can not generate an alarm on a match + involving all calendar items + the upper SSR bits */ + assert_param((sAlarm->AlarmSubSecondMask >> RTC_ALRMASSR_MASKSS_Pos) <= + (8U + (READ_BIT(RTC->ICSR, RTC_ICSR_BCDU) >> RTC_ICSR_BCDU_Pos))); + } +#endif /* USE_FULL_ASSERT */ + + /* Get Binary mode (32-bit free-running counter configuration) */ + binary_mode = READ_BIT(RTC->ICSR, RTC_ICSR_BIN); + + if (binary_mode != RTC_BINARY_ONLY) + { + if (Format == RTC_FORMAT_BIN) + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else /* Format BCD */ + { + if (READ_BIT(RTC->CR, RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + +#ifdef USE_FULL_ASSERT + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + +#endif /* USE_FULL_ASSERT */ + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + + } + } + + /* Configure the Alarm registers */ + if (sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRAE | RTC_CR_ALRAIE); + + /* Clear flag alarm A */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRAF); + + if (binary_mode == RTC_BINARY_ONLY) + { + RTC->ALRMASSR = sAlarm->AlarmSubSecondMask | sAlarm->BinaryAutoClr; + } + else + { + WRITE_REG(RTC->ALRMAR, tmpreg); + + WRITE_REG(RTC->ALRMASSR, sAlarm->AlarmSubSecondMask); + } + + WRITE_REG(RTC->ALRABINR, sAlarm->AlarmTime.SubSeconds); + + if (sAlarm->FlagAutoClr == ALARM_FLAG_AUTOCLR_ENABLE) + { + /* Configure the Alarm A output clear */ + SET_BIT(RTC->CR, RTC_CR_ALRAFCLR); + } + else + { + /* Disable the Alarm A output clear */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRAFCLR); + } + + /* Configure the Alarm interrupt */ + SET_BIT(RTC->CR, RTC_CR_ALRAE | RTC_CR_ALRAIE); + } + else + { + /* Disable the Alarm B interrupt */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRBE | RTC_CR_ALRBIE); + + /* Clear flag alarm B */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRBF); + + if (binary_mode == RTC_BINARY_ONLY) + { + WRITE_REG(RTC->ALRMBSSR, sAlarm->AlarmSubSecondMask | sAlarm->BinaryAutoClr); + } + else + { + WRITE_REG(RTC->ALRMBR, tmpreg); + + WRITE_REG(RTC->ALRMBSSR, sAlarm->AlarmSubSecondMask); + } + + WRITE_REG(RTC->ALRBBINR, sAlarm->AlarmTime.SubSeconds); + + if (sAlarm->FlagAutoClr == ALARM_FLAG_AUTOCLR_ENABLE) + { + /* Configure the Alarm B Output clear */ + SET_BIT(RTC->CR, RTC_CR_ALRBFCLR); + } + else + { + /* Disable the Alarm B Output clear */ + CLEAR_BIT(RTC->CR, RTC_CR_ALRBFCLR); + } + + /* Configure the Alarm interrupt */ + SET_BIT(RTC->CR, RTC_CR_ALRBE | RTC_CR_ALRBIE); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the specified RTC Alarm. + * @param hrtc RTC handle + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* In case of interrupt mode is used, the interrupt source must disabled */ + if (Alarm == RTC_ALARM_A) + { + CLEAR_BIT(RTC->CR, RTC_CR_ALRAE | RTC_CR_ALRAIE); + + /* AlarmA, Clear SSCLR */ + CLEAR_BIT(RTC->ALRMASSR, RTC_ALRMASSR_SSCLR); + } + else + { + CLEAR_BIT(RTC->CR, RTC_CR_ALRBE | RTC_CR_ALRBIE); + + /* AlarmB, Clear SSCLR */ + CLEAR_BIT(RTC->ALRMBSSR, RTC_ALRMBSSR_SSCLR); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param hrtc RTC handle + * @param sAlarm Pointer to Date structure + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @arg RTC_ALARM_B: AlarmB + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary format + * @arg RTC_FORMAT_BCD: BCD format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(const RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, + uint32_t Format) +{ + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + if (Alarm == RTC_ALARM_A) + { + /* AlarmA */ + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = READ_REG(RTC->ALRMAR); + subsecondtmpreg = (uint32_t)(READ_REG(RTC->ALRMASSR) & RTC_ALRMASSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)) >> RTC_ALRMAR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMAR_PM) >> RTC_ALRMAR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + else + { + sAlarm->Alarm = RTC_ALARM_B; + + tmpreg = READ_REG(RTC->ALRMBR); + subsecondtmpreg = (uint32_t)(READ_REG(RTC->ALRMBSSR) & RTC_ALRMBSSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMBR_HT | RTC_ALRMBR_HU)) >> RTC_ALRMBR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMBR_MNT | RTC_ALRMBR_MNU)) >> RTC_ALRMBR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMBR_ST | RTC_ALRMBR_SU)) >> RTC_ALRMBR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMBR_PM) >> RTC_ALRMBR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMBR_DT | RTC_ALRMBR_DU)) >> RTC_ALRMBR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMBR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + + if (Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @brief Handle Alarm interrupt request. + * @note Alarm is available in driver. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get interrupt status */ + uint32_t tmp = READ_REG(RTC->MISR); + + if ((tmp & RTC_MISR_ALRAMF) != 0U) + { + /* Clear the AlarmA interrupt pending bit */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRAF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmAEventCallback(hrtc); +#else + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + if ((tmp & RTC_MISR_ALRBMF) != 0U) + { + /* Clear the AlarmB interrupt pending bit */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRBF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmBEventCallback(hrtc); +#else + HAL_RTCEx_AlarmBEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle Alarm A Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + uint32_t tickstart = HAL_GetTick(); + + while (READ_BIT(RTC->SR, RTC_SR_ALRAF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->SR, RTC_SR_ALRAF) == 0U) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Clear the Alarm interrupt pending bit */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRAF); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group4 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Wait until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + + /* Clear RSF flag */ + CLEAR_BIT(RTC->ICSR, RTC_ICSR_RSF); + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while (READ_BIT(RTC->ICSR, RTC_ICSR_RSF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_RSF) == 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group5 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Return the RTC handle state. + * @param hrtc RTC handle + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(const RTC_HandleTypeDef *hrtc) +{ + /* Return RTC handle state */ + return hrtc->State; +} + +/** + * @} + */ +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ +/** + * @brief Enter the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Check if the Initialization mode is set */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + /* Set the Initialization mode */ + SET_BIT(RTC->ICSR, RTC_ICSR_INIT); + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while ((READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) && (status != HAL_TIMEOUT)) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + status = HAL_TIMEOUT; + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + } + else + { + break; + } + } + } + } + + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Exit Initialization mode */ + CLEAR_BIT(RTC->ICSR, RTC_ICSR_INIT); + + /* If CR_BYPSHAD bit = 0, wait for synchro */ + if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + } + else /* WA 2.9.6 Calendar initialization may fail in case of consecutive INIT mode entry. */ + { + /* Clear BYPSHAD bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + /* Restore BYPSHAD bit */ + SET_BIT(RTC->CR, RTC_CR_BYPSHAD); + } + return status; +} + +/** + * @brief Convert a 2 digit decimal to BCD format. + * @param Value Byte to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcd_high = 0U; + uint8_t tmp_value = Value; + + while (tmp_value >= 10U) + { + bcd_high++; + tmp_value -= 10U; + } + + return ((uint8_t)(bcd_high << 4U) | tmp_value); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value BCD value to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp; + + tmp = (((uint32_t)Value & 0xF0U) >> 4) * 10U; + + return (uint8_t)(tmp + ((uint32_t)Value & 0x0FU)); +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc_ex.c new file mode 100644 index 000000000..5d4406b81 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_rtc_ex.c @@ -0,0 +1,2934 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_rtc_ex.c + * @author GPM Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extended peripheral: + * + RTC Time Stamp functions + * + RTC Tamper functions + * + RTC Wake-up functions + * + Extended Control functions + * + Extended RTC features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable the RTC domain access. + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** RTC Wakeup configuration *** + ================================ + [..] + (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() + function. You can also configure the RTC Wakeup timer with interrupt mode + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() + function. + + *** Outputs configuration *** + ============================= + [..] The RTC has 2 outputs pins (RTC_OUT1 & RTC_OUT2). + To configure the outputs, use the HAL_RTC_Init() function. + (+) RTC_OUT1 and RTC_OUT2 which select one of the following two outputs: + (+) CALIB: 512Hz or 1Hz clock output (with an LSE frequency of 32.768kHz). + To enable the CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. + (+) TAMPALRM: This output is the OR between rtc_tamp_evt and ALARM signals. + ALARM is enabled by configuring the OSEL[1:0] bits in the RTC_CR register + which select the alarm A, alarm B or wakeup outputs. + rtc_tamp_evt is enabled by setting the TAMPOE bit + in the RTC_CR register which selects the tamper event outputs. + + *** Smooth digital Calibration configuration *** + ================================================ + [..] + (+) Configure the RTC Original Digital Calibration Value and the corresponding + calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib() + function. + + *** RTC synchronization *** + ================================================ + [..] + (+) The RTC can be finely adjusted using HAL_RTCEx_SetSynchroShift() function. + Writing to RTC_SHIFTR can shift (either delay or advance) the clock with + a resolution of 1 ck_apre period. + The shift operation consists in adding the SUBFS[14:0] value to the synchronous + prescaler counter SS[15:0]: this delays the clock. + + *** Bypass shadow registers *** + ================================================ + [..] + (+) Enable bypass shadow registers using the HAL_RTCEx_EnableBypassShadow(). + When the Bypass Shadow is enabled the calendar value are taken directly + from the Calendar counter. + Thus eliminating the need to wait for the RSF bit to be set. + This is especially useful after exiting from low-power modes (Stop or Standby), + since the shadow registers are not updated during these modes. + + *** RTC ultra-low-power mode *** + ================================================ + [..] + (+) Configure the RTC ultra-low-power mode using HAL_RTCEx_SetLowPowerCalib() function. + In this case, the calibration mechanism is applied on ck_apre instead of RTCCLK. + The resulting accuracy is the same, but the calibration is performed during a + calibration cycle of about 220 x PREDIV_A x RTCCLK pulses instead of 220 RTCCLK pulses. + + *** RTC subsecond register underflow interruption *** + ================================================ + [..] + (+) Enable the RTC SSRU interruption mode using HAL_RTCEx_SetSSRU_IT() function. + In this case, when the SSR rolls under 0, an SSRU interruption is triggered. + Disable the RTC SSRU interruption mode using HAL_RTCEx_DeactivateSSRU() function. + + *** TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. + You can also configure the RTC TimeStamp with interrupt mode using the + HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Internal TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC internal TimeStamp using the HAL_RTCEx_SetInternalTimeStamp() function. + User has to check internal timestamp occurrence using __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Tamper configuration *** + ============================ + [..] + (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper + with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the TAMPxPOM field on the TAMP_CR2 register. + (+) With new RTC tamper configuration, you have to call HAL_RTC_Init() in order to + perform TAMP base address offset calculation. + (+) Enable Internal tamper using HAL_RTCEx_SetInternalTamper. IT mode can be chosen using + setting Interrupt field. + + *** Backup Data Registers and Device Secrets configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup registers, use the HAL_RTCEx_BKUPRead() + function. + (+) To reset the RTC Backup registers and erase the device secrets, + use HAL_RTCEx_BKUPErase() function. + (+) Enable the lock of the Boot hardware Key using the HAL_RTCEx_LockBootHardwareKey() + function. + The backup registers from TAMP_BKP0R to TAMP_BKP7R cannot be accessed neither in + read nor in write (they are read as 0 and write ignore). + (+) Configure the erase of the Device Secrets using HAL_RTCEx_ConfigEraseDeviceSecrets() + function. + (+) Block the access to the RTC Backup registers and all the device secrets + using HAL_RTCEx_BKUPBlock() function. + + *** Monotonic counter *** + ================================================ + [..] + (+) To increment the Monotonic counter, use the HAL_RTCEx_MonotonicCounterIncrement() + function. + (+) To get the current value of the Monotonic counter, use the HAL_RTCEx_MonotonicCounterGet() + function. + + *** RTC & TAMP privilege protection modes *** + ================================================ + [..] + (+) Set the privilege level of the RTC/TAMP/Backup registers using HAL_RTCEx_PrivilegeModeSet() + function. + +) Get the privilege level of the RTC/TAMP/Backup registers using HAL_RTCEx_PrivilegeModeGet() + function. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define TAMP_ALL RTC_TAMPER_ALL + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @brief RTC TimeStamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC TimeStamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure TimeStamp feature + +@endverbatim + * @{ + */ + +#ifdef RTC_CR_TSE +/** + * @brief Set TimeStamp. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + /* Check the parameters */ +#if defined(RTC_CR_TSEDGE) + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); +#endif /* RTC_CR_TSEDGE */ + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ +#if defined(RTC_CR_TSEDGE) + CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE)); +#else + CLEAR_BIT(RTC->CR, RTC_CR_TSE); +#endif /* RTC_CR_TSEDGE */ + + /* Configure the Time Stamp TSEDGE and Enable bits */ + SET_BIT(RTC->CR, (uint32_t)TimeStampEdge | RTC_CR_TSE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set TimeStamp with Interrupt. + * @note This API must be called before enabling the TimeStamp feature. + * @note The application must ensure that the EXTI RTC interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + /* Check the parameters */ +#if defined(RTC_CR_TSEDGE) + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); +#endif /* RTC_CR_TSEDGE */ + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ +#if defined(RTC_CR_TSEDGE) + CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE | RTC_CR_TSIE)); +#else + CLEAR_BIT(RTC->CR, (RTC_CR_TSE | RTC_CR_TSIE)); +#endif /* RTC_CR_TSEDGE */ + + /* Configure the Time Stamp TSEDGE before Enable bit to avoid unwanted TSF setting. */ + SET_BIT(RTC->CR, (uint32_t)TimeStampEdge); + + /* Enable timestamp and IT */ + SET_BIT(RTC->CR, RTC_CR_TSE | RTC_CR_TSIE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* In case of interrupt mode is used, the interrupt source must disabled */ +#if defined(RTC_CR_TSEDGE) + CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE | RTC_CR_TSIE)); +#else + CLEAR_BIT(RTC->CR, (RTC_CR_TSE | RTC_CR_TSIE)); +#endif /* RTC_CR_TSEDGE */ + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} +#endif /* RTC_CR_TSE */ + +/** + * @brief Set Internal TimeStamp. + * @note This API must be called before enabling the internal TimeStamp feature. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Configure the internal Time Stamp Enable bits */ + SET_BIT(RTC->CR, RTC_CR_ITSE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Configure the internal Time Stamp Enable bits */ + CLEAR_BIT(RTC->CR, RTC_CR_ITSE); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC TimeStamp value. + * @param hrtc RTC handle + * @param sTimeStamp Pointer to Time structure + * @param sTimeStampDate Pointer to Date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(const RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, + RTC_DateTypeDef *sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime; + uint32_t tmpdate; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = READ_BIT(RTC->TSTR, RTC_TR_RESERVED_MASK); + tmpdate = READ_BIT(RTC->TSDR, RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TSTR_HT | RTC_TSTR_HU)) >> RTC_TSTR_HU_Pos); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos); + sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TSTR_ST | RTC_TSTR_SU)) >> RTC_TSTR_SU_Pos); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM)) >> RTC_TSTR_PM_Pos); + sTimeStamp->SubSeconds = READ_BIT(RTC->TSSSR, RTC_TSSSR_SS); + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0U; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos); + sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU)) >> RTC_TSDR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the TimeStamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Check if TIMESTAMP flag is set */ + if (READ_BIT(RTC->SR, RTC_SR_TSF) != 0U) + { + /* Clear the TIMESTAMP Flags */ + WRITE_REG(RTC->SCR, (RTC_SCR_CITSF | RTC_SCR_CTSF)); + + /* Check if TIMESTAMP OverRun flag is set */ + if (READ_BIT(RTC->SR, RTC_SR_TSOVF) != 0U) + { + /* Clear the TIMESTAMP OverRun Flag */ + WRITE_REG(RTC->SCR, RTC_SCR_CTSOVF); + + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Handle TimeStamp interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the TimeStamp Interrupt */ + if (READ_BIT(RTC->MISR, RTC_MISR_TSMF) != 0U) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call TimeStampEvent registered Callback */ + hrtc->TimeStampEventCallback(hrtc); +#else + HAL_RTCEx_TimeStampEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when + TSF bit is reset.*/ + WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSF); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief TimeStamp callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle TimeStamp polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + uint32_t tickstart = HAL_GetTick(); + + while (READ_BIT(RTC->SR, RTC_SR_TSF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->SR, RTC_SR_TSF) == 0U) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group2 + * @brief RTC Wake-up functions + * +@verbatim + =============================================================================== + ##### RTC Wake-up functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Wake-up feature + +@endverbatim + * @{ + */ + +/** + * @brief Set wake up timer. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Clear WUTE in RTC_CR to disable the wakeup timer */ + CLEAR_BIT(RTC->CR, RTC_CR_WUTE); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + + while (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Configure the clock source */ + MODIFY_REG(RTC->CR, RTC_CR_WUCKSEL, (uint32_t)WakeUpClock); + + /* Configure the Wakeup Timer counter */ + WRITE_REG(RTC->WUTR, (uint32_t)WakeUpCounter); + + /* Enable the Wakeup Timer */ + SET_BIT(RTC->CR, RTC_CR_WUTE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set wake up timer with interrupt. + * @note The application must ensure that the EXTI RTC interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param WakeUpCounter Wake up counter + * @param WakeUpClock Wake up clock + * @param WakeUpAutoClr Wake up auto clear value (look at WUTOCLR in reference manual) + * - No effect if WakeUpAutoClr is set to zero + * - This feature is meaningful in case of Low power mode to avoid any RTC software execution + * after Wake Up. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, + uint32_t WakeUpAutoClr) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + /* (0x0000<=WUTOCLR<=WUT) */ + assert_param(WakeUpAutoClr <= WakeUpCounter); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Clear WUTE in RTC_CR to disable the wakeup timer */ + CLEAR_BIT(RTC->CR, RTC_CR_WUTE); + + /* Clear flag Wake-Up */ + WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); + + /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload + counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in + calendar initialization mode. */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) + { + tickstart = HAL_GetTick(); + while (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Configure the Wakeup Timer counter and auto clear value */ + WRITE_REG(RTC->WUTR, (uint32_t)(WakeUpCounter | (WakeUpAutoClr << RTC_WUTR_WUTOCLR_Pos))); + + /* Configure the clock source */ + MODIFY_REG(RTC->CR, RTC_CR_WUCKSEL, (uint32_t)WakeUpClock); + + /* Configure the Interrupt in the RTC_CR register and Enable the Wakeup Timer*/ + SET_BIT(RTC->CR, (RTC_CR_WUTIE | RTC_CR_WUTE)); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate wake up timer counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the Wakeup Timer */ + /* In case of interrupt mode is used, the interrupt source must disabled */ + CLEAR_BIT(RTC->CR, (RTC_CR_WUTE | RTC_CR_WUTIE)); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get wake up timer counter. + * @param hrtc RTC handle + * @retval Counter value + */ +uint32_t HAL_RTCEx_GetWakeUpTimer(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Get the counter value */ + return (uint32_t)(READ_BIT(RTC->WUTR, RTC_WUTR_WUT)); +} + +/** + * @brief Handle Wake Up Timer interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the Wake-Up Timer Interrupt */ + if (READ_BIT(RTC->MISR, RTC_MISR_WUTMF) != 0U) + { + /* Immediately clear flags */ + WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call wake up timer registered Callback */ + hrtc->WakeUpTimerEventCallback(hrtc); +#else + HAL_RTCEx_WakeUpTimerEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Wake Up Timer callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle Wake Up Timer Polling. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + uint32_t tickstart = HAL_GetTick(); + + while (READ_BIT(RTC->SR, RTC_SR_WUTF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->SR, RTC_SR_WUTF) == 0U) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Clear the WAKEUPTIMER Flag */ + WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Set the Coarse calibration parameters. + (+) Deactivate the Coarse calibration parameters + (+) Set the Smooth calibration parameters. + (+) Set Low Power calibration parameter. + (+) Configure the Synchronization Shift Control Settings. + (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enable the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enable the Bypass Shadow feature. + (+) Disable the Bypass Shadow feature. + +@endverbatim + * @{ + */ + +/** + * @brief Set the Smooth calibration parameters. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue must be equal to 0. + * @param hrtc RTC handle + * @param SmoothCalibPeriod Select the Smooth Calibration Period. + * This parameter can be one of the following values : + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. + * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, + uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + tickstart = HAL_GetTick(); + + /* check if a calibration is pending */ + while (READ_BIT(RTC->ICSR, RTC_ICSR_RECALPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_RECALPF) != 0U) + { + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Smooth calibration settings */ + MODIFY_REG(RTC->CALR, (RTC_CALR_CALP | RTC_CALR_CALW8 | RTC_CALR_CALW16 | RTC_CALR_CALM), + (uint32_t)(SmoothCalibPeriod | SmoothCalibPlusPulses | SmoothCalibMinusPulsesValue)); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Select the low power Calibration mode. + * @param hrtc: RTC handle + * @param LowPowerCalib: Low power Calibration mode. + * This parameter can be one of the following values : + * @arg RTC_LPCAL_SET: Low power mode. + * @arg RTC_LPCAL_RESET: High consumption mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib) +{ + /* Check the parameters */ + assert_param(IS_RTC_LOW_POWER_CALIB(LowPowerCalib)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Smooth calibration settings */ + MODIFY_REG(RTC->CALR, RTC_CALR_LPCAL, LowPowerCalib); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @param hrtc RTC handle + * @param ShiftAdd1S Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values: + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed */ + while (READ_BIT(RTC->ICSR, RTC_ICSR_SHPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->ICSR, RTC_ICSR_SHPF) != 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + +#if defined(RTC_CR_REFCKON) + /* Check if the reference clock detection is disabled */ + if (READ_BIT(RTC->CR, RTC_CR_REFCKON) == 0U) + { +#endif /* RTC_CR_REFCKON */ + /* Configure the Shift settings */ + MODIFY_REG(RTC->SHIFTR, RTC_SHIFTR_SUBFS, (uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S)); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } +#if defined(RTC_CR_REFCKON) + } + else + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } +#endif /* RTC_CR_REFCKON */ + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +#if defined(RTC_CR_COSEL) +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @param CalibOutput Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Configure the RTC_CR register */ + MODIFY_REG(RTC->CR, RTC_CR_COSEL, CalibOutput); + + /* Enable calibration output */ + SET_BIT(RTC->CR, RTC_CR_COE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable calibration output */ + CLEAR_BIT(RTC->CR, RTC_CR_COE); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} +#endif /* RTC_CR_COSEL */ + +#if defined(RTC_CR_REFCKON) +/** + * @brief Enable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Enable clockref detection */ + SET_BIT(RTC->CR, RTC_CR_REFCKON); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Disable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Disable clockref detection */ + CLEAR_BIT(RTC->CR, RTC_CR_REFCKON); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* RTC_CR_REFCKON */ + +/** + * @brief Enable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Set the BYPSHAD bit */ + SET_BIT(RTC->CR, RTC_CR_BYPSHAD); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Reset the BYPSHAD bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Increment Monotonic counter. + * @param hrtc RTC handle + * @param Instance Monotonic counter Instance + * This parameter can be one of the following values : + * @arg RTC_MONOTONIC_COUNTER_1 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterIncrement(const RTC_HandleTypeDef *hrtc, uint32_t Instance) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + UNUSED(Instance); + + /* This register is read-only only and is incremented by one when a write access is done to this + register. This register cannot roll-over and is frozen when reaching the maximum value. */ + CLEAR_REG(TAMP->COUNT1R); + + return HAL_OK; +} + +/** + * @brief Monotonic counter. + * @param hrtc RTC handle + * @param Instance Monotonic counter Instance + * This parameter can be one of the following values : + * @arg RTC_MONOTONIC_COUNTER_1 + * @param pValue Pointer to the counter monotonic counter value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterGet(const RTC_HandleTypeDef *hrtc, uint32_t Instance, uint32_t *pValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + UNUSED(Instance); + + /* This register is read-only only and is incremented by one when a write access is done to this + register. This register cannot roll-over and is frozen when reaching the maximum value. */ + *pValue = READ_REG(TAMP->COUNT1R); + + return HAL_OK; +} + +/** + * @brief Set SSR Underflow detection with Interrupt. + * @note The application must ensure that the EXTI RTC interrupt line is configured and enabled. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Enable IT SSRU */ + __HAL_RTC_SSRU_ENABLE_IT(hrtc, RTC_IT_SSRU); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate SSR Underflow. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_SSRU_DISABLE_IT(hrtc, RTC_IT_SSRU); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Handle SSR underflow interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the SSR Underflow Interrupt */ + if (READ_BIT(RTC->MISR, RTC_MISR_SSRUMF) != 0U) + { + /* Immediately clear SSR underflow flag */ + WRITE_REG(RTC->SCR, RTC_SCR_CSSRUF); + + /* SSRU callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call SSRUEvent registered Callback */ + hrtc->SSRUEventCallback(hrtc); +#else + HAL_RTCEx_SSRUEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief SSR underflow callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_SSRUEventCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group4 + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) RTC Alarm B callback + (+) RTC Poll for Alarm B request + +@endverbatim + * @{ + */ + +/** + * @brief Alarm B callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle Alarm B Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(const RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + uint32_t tickstart = HAL_GetTick(); + + while (READ_BIT(RTC->SR, RTC_SR_ALRBF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(RTC->SR, RTC_SR_ALRBF) == 0U) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Clear the Alarm Flag */ + WRITE_REG(RTC->SCR, RTC_SCR_CALRBF); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group5 + * @brief Extended RTC Tamper functions + * +@verbatim + ============================================================================== + ##### Tamper functions ##### + ============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that one you can select to output tamper event on RTC pin. + [..] + (+) Enable the Tamper and configure the Tamper filter count, trigger Edge + or Level according to the Tamper filter (if equal to 0 Edge else Level) + value, sampling frequency, NoErase, MaskFlag, precharge or discharge and + Pull-UP, timestamp using the HAL_RTCEx_SetTamper() function. + You can configure Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. + (+) The default configuration of the Tamper erases the backup registers. To avoid + erase, enable the NoErase field on the TAMP_TAMPCR register. + [..] + (+) Enable Internal Tamper and configure it with interrupt, timestamp using + the HAL_RTCEx_SetInternalTamper() function. + +@endverbatim + * @{ + */ + + +/** + * @brief Set Tamper + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper) +{ + uint32_t tmpreg; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); +#if (RTC_TAMP_NB > 2U) + /* Mask flag only supported by TAMPER 1, 2 and 3 */ + assert_param(!((sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) && (sTamper->Tamper > RTC_TAMPER_3))); +#else + assert_param(!((sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) && (sTamper->Tamper > RTC_TAMPER_2))); +#endif /* (RTC_TAMP_NB > 2U) */ + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + /* Trigger and Filter have exclusive configurations */ + assert_param(((sTamper->Filter != RTC_TAMPERFILTER_DISABLE) && + ((sTamper->Trigger == RTC_TAMPERTRIGGER_LOWLEVEL) || + (sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL))) || + ((sTamper->Filter == RTC_TAMPERFILTER_DISABLE) && + ((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE) || + (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)))); + + /* Configuration register 2 */ + tmpreg = READ_REG(TAMP->CR2); + tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | + (sTamper->Tamper << TAMP_CR2_TAMP1POM_Pos)); + + if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)) + { + tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos); + } + + if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos); + } + + if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1POM_Pos); + } + WRITE_REG(TAMP->CR2, tmpreg); + + /* Filter control register */ + WRITE_REG(TAMP->FLTCR, sTamper->Filter | sTamper->SamplingFrequency | sTamper->PrechargeDuration | + sTamper->TamperPullUp); + + /* Timestamp on tamper */ + if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sTamper->TimeStampOnTamperDetection) + { + MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sTamper->TimeStampOnTamperDetection); + } + + /* Control register 1 */ + SET_BIT(TAMP->CR1, sTamper->Tamper); + + return HAL_OK; +} + + +/** + * @brief Set Tamper in IT mode + * @note The application must ensure that the EXTI TAMP interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper) +{ + uint32_t tmpreg; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + /* The interrupt must not be enabled when TAMPxMSK is set. */ + assert_param(sTamper->MaskFlag == RTC_TAMPERMASK_FLAG_DISABLE); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + /* Trigger and Filter have exclusive configurations */ + assert_param(((sTamper->Filter != RTC_TAMPERFILTER_DISABLE) && + ((sTamper->Trigger == RTC_TAMPERTRIGGER_LOWLEVEL) || + (sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL))) || + ((sTamper->Filter == RTC_TAMPERFILTER_DISABLE) && + ((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE) || + (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)))); + + /* Configuration register 2 */ + tmpreg = READ_REG(TAMP->CR2); + tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | + (sTamper->Tamper << TAMP_CR2_TAMP1POM_Pos)); + + if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)) + { + tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos); + } + + if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1POM_Pos); + } + WRITE_REG(TAMP->CR2, tmpreg); + + /* Filter control register */ + WRITE_REG(TAMP->FLTCR, sTamper->Filter | sTamper->SamplingFrequency | sTamper->PrechargeDuration | + sTamper->TamperPullUp); + + /* Timestamp on tamper */ + if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sTamper->TimeStampOnTamperDetection) + { + MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sTamper->TimeStampOnTamperDetection); + } + + /* Interrupt enable register */ + SET_BIT(TAMP->IER, sTamper->Tamper); + + /* Control register 1 */ + SET_BIT(TAMP->CR1, sTamper->Tamper); + + return HAL_OK; +} + +/** + * @brief Deactivate Tamper. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @arg RTC_TAMPER_3 + * @arg RTC_TAMPER_4 + * @arg RTC_TAMPER_5 + * @arg RTC_TAMPER_6 + * @arg RTC_TAMPER_7 + * @arg RTC_TAMPER_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(const RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Disable the selected Tamper pin */ + CLEAR_BIT(TAMP->CR1, Tamper); + + /* Clear tamper interrupt and event flags (WO register) */ + WRITE_REG(TAMP->SCR, Tamper); + + /* Clear tamper mask/noerase/trigger configuration */ + CLEAR_BIT(TAMP->CR2, (Tamper << TAMP_CR2_TAMP1TRG_Pos) | (Tamper << TAMP_CR2_TAMP1MSK_Pos) | \ + (Tamper << TAMP_CR2_TAMP1POM_Pos)); + + /* Clear tamper interrupt mode configuration */ + CLEAR_BIT(TAMP->IER, Tamper); + + return HAL_OK; +} + +/** + * @brief Set all active Tampers at the same time. + * @note For interrupt mode, the application must ensure that the EXTI RTC interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param sAllTamper Pointer to active Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetActiveTampers(RTC_HandleTypeDef *hrtc, const RTC_ActiveTampersTypeDef *sAllTamper) +{ + uint32_t tmp_ier; + uint32_t tmp_cr1; + uint32_t tmp_cr2; + uint32_t tmp_atcr1; + uint32_t tmp_atcr2; + uint32_t tmp_cr; + uint32_t i; + uint32_t tickstart; + +#ifdef USE_FULL_ASSERT + for (i = 0; i < RTC_TAMP_NB; i++) + { + assert_param(IS_RTC_TAMPER_ERASE_MODE(sAllTamper->TampInput[i].NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sAllTamper->TampInput[i].MaskFlag)); + /* Mask flag only supported by TAMPER 1, 2 and 3 */ + assert_param(!((sAllTamper->TampInput[i].MaskFlag == RTC_TAMPERMASK_FLAG_ENABLE) && + (i >= RTC_TAMPER_MASKABLE_NB))); + } + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sAllTamper->TimeStampOnTamperDetection)); + assert_param(IS_RTC_ATAMPER_FILTER(sAllTamper->ActiveFilter)); + assert_param(IS_RTC_ATAMPER_OUTPUT_CHANGE_PERIOD(sAllTamper->ActiveOutputChangePeriod)); + assert_param(IS_RTC_ATAMPER_ASYNCPRES_RTCCLK(sAllTamper->ActiveAsyncPrescaler)); +#endif /* USE_FULL_ASSERT */ + + /* Active Tampers must not be already enabled */ + if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) != 0U) + { + /* Disable all actives tampers with HAL_RTCEx_DeactivateActiveTampers. + No need to check return value because it returns always HAL_OK */ + (void) HAL_RTCEx_DeactivateActiveTampers(hrtc); + } + + /* Set TimeStamp on tamper detection */ + tmp_cr = READ_REG(RTC->CR); + if ((tmp_cr & RTC_CR_TAMPTS) != (sAllTamper->TimeStampOnTamperDetection)) + { + MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sAllTamper->TimeStampOnTamperDetection); + } + + tmp_cr1 = READ_REG(TAMP->CR1); + tmp_cr2 = READ_REG(TAMP->CR2); + tmp_atcr2 = 0U; + tmp_ier = READ_REG(TAMP->IER); + + /* Set common parameters */ + tmp_atcr1 = (sAllTamper->ActiveFilter | (sAllTamper->ActiveOutputChangePeriod << TAMP_ATCR1_ATPER_Pos) | + sAllTamper->ActiveAsyncPrescaler); + + /* Set specific parameters for each active tamper inputs if enable */ + for (i = 0; i < RTC_TAMP_NB; i++) + { + if (sAllTamper->TampInput[i].Enable != RTC_ATAMP_DISABLE) + { + tmp_cr1 |= (TAMP_CR1_TAMP1E << i); + tmp_atcr1 |= (TAMP_ATCR1_TAMP1AM << i); + + if (sAllTamper->TampInput[i].Interrupt != RTC_ATAMP_INTERRUPT_DISABLE) + { + /* Interrupt enable register */ + tmp_ier |= (TAMP_IER_TAMP1IE << i); + } + + if (sAllTamper->TampInput[i].MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + tmp_cr2 |= (TAMP_CR2_TAMP1MSK << i); + } + + if (sAllTamper->TampInput[i].NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + tmp_cr2 |= (TAMP_CR2_TAMP1POM << i); + } + + /* Configure ATOSELx[] in case of output sharing */ + tmp_atcr2 |= sAllTamper->TampInput[i].Output << ((3U * i) + TAMP_ATCR2_ATOSEL1_Pos); + + if (i != sAllTamper->TampInput[i].Output) + { + tmp_atcr1 |= TAMP_ATCR1_ATOSHARE; + } + } + } + + WRITE_REG(TAMP->IER, tmp_ier); + WRITE_REG(TAMP->ATCR1, tmp_atcr1); + WRITE_REG(TAMP->ATCR2, tmp_atcr2); + WRITE_REG(TAMP->CR2, tmp_cr2); + WRITE_REG(TAMP->CR1, tmp_cr1); + + /* Write seed */ + for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++) + { + WRITE_REG(TAMP->ATSEEDR, sAllTamper->Seed[i]); + } + + /* Wait till RTC SEEDF flag is cleared and if Time out is reached exit */ + tickstart = HAL_GetTick(); + while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + + return HAL_OK; +} + +/** + * @brief Write a new seed. Active tamper must be enabled. + * @param hrtc RTC handle + * @param pSeed Pointer to active tamper seed values. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetActiveSeed(RTC_HandleTypeDef *hrtc, const uint32_t *pSeed) +{ + uint32_t i; + uint32_t tickstart; + + /* Active Tampers must be enabled */ + if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) == 0U) + { + return HAL_ERROR; + } + + for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++) + { + WRITE_REG(TAMP->ATSEEDR, pSeed[i]); + } + + /* Wait till RTC SEEDF flag is cleared and if Time out is reached exit */ + tickstart = HAL_GetTick(); + while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U) + { + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + + return HAL_OK; +} + +#if defined(TAMP_CFGR_BHKLOCK) +/** + * @brief Lock the Boot hardware Key + * @param hrtc RTC handle + * @note The backup registers from TAMP_BKP0R to TAMP_BKP7R cannot be accessed neither in + * read nor in write (they are read as 0 and write ignore). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_LockBootHardwareKey(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + WRITE_REG(TAMP->CFGR, TAMP_CFGR_BHKLOCK); + + return HAL_OK; +} +#endif /* TAMP_CFGR_BHKLOCK */ + +/** + * @brief Deactivate all Active Tampers at the same time. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateActiveTampers(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Get Active tampers */ + uint32_t atamp_mask = READ_BIT(TAMP->ATCR1, TAMP_ALL); + + /* Disable all actives tampers but not passives tampers */ + CLEAR_BIT(TAMP->CR1, atamp_mask); + + /* Clear tamper interrupt and event flags (WO register) of all actives tampers but not passives tampers */ + WRITE_REG(TAMP->SCR, atamp_mask); + + /* Disable no erase and mask */ + CLEAR_BIT(TAMP->CR2, (atamp_mask | ((atamp_mask & (TAMP_ATCR1_TAMP1AM | TAMP_ATCR1_TAMP2AM | TAMP_ATCR1_TAMP3AM)) << + TAMP_CR2_TAMP1MSK_Pos))); + + /* Clear all active tampers interrupt mode configuration but not passives tampers */ + CLEAR_BIT(TAMP->IER, atamp_mask); + + /* Set reset value for active tamper control register 1 */ + WRITE_REG(TAMP->ATCR1, TAMP_ATCR1_ATCKSEL_0 | TAMP_ATCR1_ATCKSEL_1 | TAMP_ATCR1_ATCKSEL_2); + + /* Set reset value for active tamper control register 2 */ + CLEAR_REG(TAMP->ATCR2); + + return HAL_OK; +} + +/** + * @brief Tamper event polling. + * @param hrtc RTC handle + * @param Tamper Selected tamper pin. + * This parameter can be a combination of the following values: + * @arg RTC_TAMPER_1 + * @arg RTC_TAMPER_2 + * @arg RTC_TAMPER_3 + * @arg RTC_TAMPER_4 + * @arg RTC_TAMPER_5 + * @arg RTC_TAMPER_6 + * @arg RTC_TAMPER_7 + * @arg RTC_TAMPER_8 + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(const RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + assert_param(IS_RTC_TAMPER(Tamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while (READ_BIT(TAMP->SR, Tamper) != Tamper) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(TAMP->SR, Tamper) != Tamper) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Clear the Tamper Flag */ + WRITE_REG(TAMP->SCR, Tamper); + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(const RTC_HandleTypeDef *hrtc, + const RTC_InternalTamperTypeDef *sIntTamper) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sIntTamper->NoErase)); + + /* Timestamp enable on internal tamper */ + if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection) + { + MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection); + } + + /* No Erase Backup register enable for Internal Tamper */ + if (sIntTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + SET_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1POM_Pos))); + } + else + { + CLEAR_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1POM_Pos))); + } + + /* Enable Internal Tamper */ + SET_BIT(TAMP->CR1, sIntTamper->IntTamper); + + return HAL_OK; +} + + +/** + * @brief Set Internal Tamper in interrupt mode + * @note The application must ensure that the EXTI RTC tamper interrupt line is configured and enabled. + * @param hrtc RTC handle + * @param sIntTamper Pointer to Internal Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(const RTC_HandleTypeDef *hrtc, + const RTC_InternalTamperTypeDef *sIntTamper) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sIntTamper->NoErase)); + + /* Timestamp enable on internal tamper */ + if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection) + { + MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection); + } + + /* Interrupt enable register */ + SET_BIT(TAMP->IER, sIntTamper->IntTamper); + + /* No Erase Backup register enable for Internal Tamper */ + if (sIntTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + SET_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1POM_Pos))); + } + else + { + CLEAR_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1POM_Pos))); + } + + /* Enable Internal Tamper */ + SET_BIT(TAMP->CR1, sIntTamper->IntTamper); + + return HAL_OK; +} + +/** + * @brief Deactivate Internal Tamper. + * @param hrtc RTC handle + * @param IntTamper Selected internal tamper event. + * This parameter can be any combination of existing internal tampers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(const RTC_HandleTypeDef *hrtc, uint32_t IntTamper) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + /* Disable the selected Tamper pin */ + CLEAR_BIT(TAMP->CR1, IntTamper); + + /* Clear internal tamper interrupt mode configuration */ + CLEAR_BIT(TAMP->IER, IntTamper); + + /* Clear internal tamper interrupt */ + WRITE_REG(TAMP->SCR, IntTamper); + + return HAL_OK; +} + +/** + * @brief Internal Tamper event polling. + * @param hrtc RTC handle + * @param IntTamper selected tamper. + * This parameter can be any combination of existing internal tampers. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(const RTC_HandleTypeDef *hrtc, uint32_t IntTamper, + uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); + + uint32_t tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while (READ_BIT(TAMP->SR, IntTamper) != IntTamper) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(TAMP->SR, IntTamper) != IntTamper) + { + return HAL_TIMEOUT; + } + else + { + break; + } + } + } + } + + /* Clear the Tamper Flag */ + WRITE_REG(TAMP->SCR, IntTamper); + + return HAL_OK; +} + +/** + * @brief Handle Tamper interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the Tampers Interrupt */ + uint32_t tmp = READ_REG(TAMP->MISR); + + /* Check Tamper1 status */ + if ((tmp & RTC_TAMPER_1) == RTC_TAMPER_1) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 1 Event registered Callback */ + hrtc->Tamper1EventCallback(hrtc); +#else + /* Tamper1 callback */ + HAL_RTCEx_Tamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper2 status */ + if ((tmp & RTC_TAMPER_2) == RTC_TAMPER_2) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 2 Event registered Callback */ + hrtc->Tamper2EventCallback(hrtc); +#else + /* Tamper2 callback */ + HAL_RTCEx_Tamper2EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +#if (RTC_TAMP_NB > 2U) + + /* Check Tamper3 status */ + if ((tmp & RTC_TAMPER_3) == RTC_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 3 Event registered Callback */ + hrtc->Tamper3EventCallback(hrtc); +#else + /* Tamper3 callback */ + HAL_RTCEx_Tamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper4 status */ + if ((tmp & RTC_TAMPER_4) == RTC_TAMPER_4) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 4 Event registered Callback */ + hrtc->Tamper4EventCallback(hrtc); +#else + /* Tamper4 callback */ + HAL_RTCEx_Tamper4EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper5 status */ + if ((tmp & RTC_TAMPER_5) == RTC_TAMPER_5) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 5 Event registered Callback */ + hrtc->Tamper5EventCallback(hrtc); +#else + /* Tamper5 callback */ + HAL_RTCEx_Tamper5EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper6 status */ + if ((tmp & RTC_TAMPER_6) == RTC_TAMPER_6) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 6 Event registered Callback */ + hrtc->Tamper6EventCallback(hrtc); +#else + /* Tamper6 callback */ + HAL_RTCEx_Tamper6EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +#endif /* (RTC_TAMP_NB > 2U) */ +#if (RTC_TAMP_NB > 6U) + + /* Check Tamper7 status */ + if ((tmp & RTC_TAMPER_7) == RTC_TAMPER_7) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 7 Event registered Callback */ + hrtc->Tamper7EventCallback(hrtc); +#else + /* Tamper7 callback */ + HAL_RTCEx_Tamper7EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Tamper8 status */ + if ((tmp & RTC_TAMPER_8) == RTC_TAMPER_8) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Tamper 8 Event registered Callback */ + hrtc->Tamper8EventCallback(hrtc); +#else + /* Tamper8 callback */ + HAL_RTCEx_Tamper8EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + +#endif /* (RTC_TAMP_NB > 6U) */ + + /* Check Internal Tamper1 status */ + if ((tmp & RTC_INT_TAMPER_1) == RTC_INT_TAMPER_1) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 1 Event registered Callback */ + hrtc->InternalTamper1EventCallback(hrtc); +#else + /* Internal Tamper1 callback */ + HAL_RTCEx_InternalTamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper2 status */ + if ((tmp & RTC_INT_TAMPER_2) == RTC_INT_TAMPER_2) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 2 Event registered Callback */ + hrtc->InternalTamper2EventCallback(hrtc); +#else + /* Internal Tamper2 callback */ + HAL_RTCEx_InternalTamper2EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper3 status */ + if ((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 3 Event registered Callback */ + hrtc->InternalTamper3EventCallback(hrtc); +#else + /* Internal Tamper3 callback */ + HAL_RTCEx_InternalTamper3EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper4 status */ + if ((tmp & RTC_INT_TAMPER_4) == RTC_INT_TAMPER_4) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 4 Event registered Callback */ + hrtc->InternalTamper4EventCallback(hrtc); +#else + /* Internal Tamper4 callback */ + HAL_RTCEx_InternalTamper4EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper5 status */ + if ((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 5 Event registered Callback */ + hrtc->InternalTamper5EventCallback(hrtc); +#else + /* Internal Tamper5 callback */ + HAL_RTCEx_InternalTamper5EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper6 status */ + if ((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 6 Event registered Callback */ + hrtc->InternalTamper6EventCallback(hrtc); +#else + /* Internal Tamper6 callback */ + HAL_RTCEx_InternalTamper6EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper7 status */ + if ((tmp & RTC_INT_TAMPER_7) == RTC_INT_TAMPER_7) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 7 Event registered Callback */ + hrtc->InternalTamper7EventCallback(hrtc); +#else + /* Internal Tamper7 callback */ + HAL_RTCEx_InternalTamper7EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper8 status */ + if ((tmp & RTC_INT_TAMPER_8) == RTC_INT_TAMPER_8) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 8 Event registered Callback */ + hrtc->InternalTamper8EventCallback(hrtc); +#else + /* Internal Tamper8 callback */ + HAL_RTCEx_InternalTamper8EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper9 status */ + if ((tmp & RTC_INT_TAMPER_9) == RTC_INT_TAMPER_9) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 9 Event registered Callback */ + hrtc->InternalTamper9EventCallback(hrtc); +#else + /* Internal Tamper9 callback */ + HAL_RTCEx_InternalTamper9EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper11 status */ + if ((tmp & RTC_INT_TAMPER_11) == RTC_INT_TAMPER_11) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 11 Event registered Callback */ + hrtc->InternalTamper11EventCallback(hrtc); +#else + /* Internal Tamper11 callback */ + HAL_RTCEx_InternalTamper11EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Check Internal Tamper15 status */ + if ((tmp & RTC_INT_TAMPER_15) == RTC_INT_TAMPER_15) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Internal Tamper 15 Event registered Callback */ + hrtc->InternalTamper15EventCallback(hrtc); +#else + /* Internal Tamper15 callback */ + HAL_RTCEx_InternalTamper15EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Clear flags after treatment to allow the potential tamper feature */ + WRITE_REG(TAMP->SCR, tmp); +} + +/** + * @brief Tamper 1 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 2 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 4 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper4EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper4EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 5 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper5EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper5EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 6 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper6EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper6EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 7 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper7EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper7EventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 8 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_Tamper8EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper8EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 1 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper1EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 2 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper2EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper2EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 3 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper3EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 4 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper4EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 5 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper5EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 6 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper6EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 7 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper7EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper7EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 8 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper8EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper8EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 9 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper9EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper9EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 11 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper11EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper11EventCallback could be implemented in the user file + */ +} + +/** + * @brief Internal Tamper 15 callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_InternalTamper15EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_InternalTamper15EventCallback could be implemented in the user file + */ +} +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group6 + * @brief Extended RTC Backup register functions + * +@verbatim + =============================================================================== + ##### Extended RTC Backup register functions ##### + =============================================================================== + [..] + (+) Before calling any tamper or internal tamper function, you have to call first + HAL_RTC_Init() function. + (+) In that one you can select to output tamper event on RTC pin. + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register +@endverbatim + * @{ + */ + + +/** + * @brief Write a data in a specified RTC Backup data register. + * @param hrtc RTC handle + * @param BackupRegister RTC Backup data Register number. + * This parameter can be RTC_BKP_DRx where x can be from 0 to RTC_BACKUP_NB + * @param Data Data to be written in the specified Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + /* Determine address of the specified Backup register */ + tmp = (uint32_t)(&(TAMP->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Write data in the specified register Backup register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc RTC handle + * @param BackupRegister RTC Backup data Register number. + * This parameter can be RTC_BKP_DRx where x can be from 0 to RTC_BACKUP_NB + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t tmp; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + /* Determine address of the specified Backup register */ + tmp = (uint32_t)(&(TAMP->BKP0R)); + tmp += (BackupRegister * 4U); + + /* Read the data from the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @brief Reset the RTC Backup data Registers and the device secrets. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_BKUPErase(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + SET_BIT(TAMP->CR2, TAMP_CR2_BKERASE); +} + +/** + * @brief Block the access to the RTC Backup data Register and all the device secrets. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_BKUPBlock(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + WRITE_REG(TAMP->CR2, TAMP_CR2_BKBLOCK); +} + +/** + * @brief Disable the Block to the access to the RTC Backup data Register and the device secrets. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_BKUPUnblock(const RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + CLEAR_BIT(TAMP->CR2, TAMP_CR2_BKBLOCK); +} + +#ifdef TAMP_RPCFGR_RPCFG0 +/** + * @brief Enable and Disable the erase of the configurable Device Secrets + * @note This API must be called before enabling the Tamper. + * @param hrtc RTC handle + * @param DeviceSecretConf Specifies the configuration of the Device Secrets + * This parameter can be a combination of the following values: + * @arg TAMP_DEVICESECRETS_ERASE_NONE + * @arg TAMP_DEVICESECRETS_ERASE_BKPSRAM + * + * @retval None + */ +void HAL_RTCEx_ConfigEraseDeviceSecrets(const RTC_HandleTypeDef *hrtc, uint32_t DeviceSecretConf) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + MODIFY_REG(TAMP->RPCFGR, TAMP_RPCFGR_RPCFG0, DeviceSecretConf); +} +#endif /* TAMP_RPCFGR_RPCFG0 */ + +/** + * @} + */ + +#if defined(TAMP_PRIVCFGR_TAMPPRIV) +/** @addtogroup RTCEx_Exported_Functions_Group8 + * @brief Extended RTC privilege functions + * +@verbatim + =============================================================================== + ##### Extended RTC privilege functions ##### + =============================================================================== + [..] + (+) Before calling privilege function, you have to call first + HAL_RTC_Init() function. +@endverbatim + * @{ + */ + +/** + * @brief Set the privilege level of the RTC/TAMP/Backup registers. + * To get the current privilege level call HAL_RTCEx_PrivilegeModeGet. + * @param hrtc RTC handle + * @param privilegeState Privilege state + * @retval HAL_StatusTypeDef + */ +HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeSet(const RTC_HandleTypeDef *hrtc, + const RTC_PrivilegeStateTypeDef *privilegeState) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + assert_param(IS_RTC_PRIVILEGE_FULL(privilegeState->rtcPrivilegeFull)); + assert_param(IS_RTC_PRIVILEGE_FEATURES(privilegeState->rtcPrivilegeFeatures)); + assert_param(IS_TAMP_PRIVILEGE_FULL(privilegeState->tampPrivilegeFull)); + assert_param(IS_TAMP_MONOTONIC_CNT_PRIVILEGE(privilegeState->MonotonicCounterPrivilege)); + assert_param(IS_RTC_PRIVILEGE_BKUP_ZONE(privilegeState->backupRegisterPrivZone)); + assert_param(IS_RTC_BKP(privilegeState->backupRegisterStartZone2)); + assert_param(IS_RTC_BKP(privilegeState->backupRegisterStartZone3)); + + /* RTC privilege configuration */ + WRITE_REG(RTC->PRIVCFGR, privilegeState->rtcPrivilegeFull | privilegeState->rtcPrivilegeFeatures); + + /* TAMP, Monotonic counter and Backup registers privilege configuration */ + WRITE_REG(TAMP->PRIVCFGR, privilegeState->tampPrivilegeFull | privilegeState->backupRegisterPrivZone | \ + privilegeState->MonotonicCounterPrivilege); + + /* Backup register start zone */ + MODIFY_REG(TAMP->CFGR, + (TAMP_CFGR_BKPRW | TAMP_CFGR_BKPW), + ((privilegeState->backupRegisterStartZone2 << TAMP_CFGR_BKPRW_Pos) | (privilegeState->backupRegisterStartZone3 << TAMP_CFGR_BKPW_Pos))); + + return HAL_OK; +} + +/** + * @brief Get the privilege level of the RTC/TAMP/Backup registers. + * To set the privilege level please call HAL_RTCEx_PrivilegeModeSet. + * @param hrtc RTC handle + * @param privilegeState Privilege state + * @retval HAL_StatusTypeDef + */ +HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeGet(const RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* Read registers */ + uint32_t rtc_privcfgr = READ_REG(RTC->PRIVCFGR); + uint32_t tamp_privcfgr = READ_REG(TAMP->PRIVCFGR); + uint32_t tamp_cfgr = READ_REG(TAMP->CFGR); + + /* RTC privilege configuration */ + privilegeState->rtcPrivilegeFull = READ_BIT(rtc_privcfgr, RTC_PRIVCFGR_PRIV); + + /* Warning, rtcPrivilegeFeatures is only relevant if privilegeState->rtcPrivilegeFull == RTC_PRIVILEGE_FULL_NO */ + privilegeState->rtcPrivilegeFeatures = READ_BIT(rtc_privcfgr, RTC_PRIVILEGE_FEATURE_ALL); + + /* TAMP and Backup registers privilege configuration */ + privilegeState->tampPrivilegeFull = READ_BIT(tamp_privcfgr, TAMP_PRIVCFGR_TAMPPRIV); + + /* Monotonic registers privilege configuration */ + privilegeState->MonotonicCounterPrivilege = READ_BIT(tamp_privcfgr, TAMP_PRIVCFGR_CNT1PRIV); + + /* Backup registers Zones */ + privilegeState->backupRegisterPrivZone = READ_BIT(tamp_privcfgr, (TAMP_PRIVCFGR_BKPWPRIV | TAMP_PRIVCFGR_BKPRWPRIV)); + + /* Backup registers start zones */ + privilegeState->backupRegisterStartZone2 = READ_BIT(tamp_cfgr, TAMP_CFGR_BKPRW) >> TAMP_CFGR_BKPRW_Pos; + privilegeState->backupRegisterStartZone3 = READ_BIT(tamp_cfgr, TAMP_CFGR_BKPW) >> TAMP_CFGR_BKPW_Pos; + + return HAL_OK; +} + +/** + * @} + */ +#endif /* TAMP_PRIVCFGR_TAMPPRIV */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ + +/** + * @} + */ + + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai.c new file mode 100644 index 000000000..62c876560 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai.c @@ -0,0 +1,2898 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sai.c + * @author MCD Application Team + * @brief SAI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Audio Interface (SAI) peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + The SAI HAL driver can be used as follows: + + (#) Declare a SAI_HandleTypeDef handle structure (eg. SAI_HandleTypeDef hsai). + (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API: + (##) Enable the SAI interface clock. + (##) SAI pins configuration: + (+++) Enable the clock for the SAI GPIOs. + (+++) Configure these SAI pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT() + and HAL_SAI_Receive_IT() APIs): + (+++) Configure the SAI interrupt priority. + (+++) Enable the NVIC SAI IRQ handle. + + (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA() + and HAL_SAI_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream. + (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream. + + (#) The initialization can be done by two ways + (##) Expert mode : Initialize the structures Init, FrameInit and SlotInit and call HAL_SAI_Init(). + (##) Simplified mode : Initialize the high part of Init Structure and call HAL_SAI_InitProtocol(). + + [..] + (@) The specific SAI interrupts (FIFO request and Overrun underrun interrupt) + will be managed using the macros __HAL_SAI_ENABLE_IT() and __HAL_SAI_DISABLE_IT() + inside the transmit and receive process. + [..] + (@) Make sure that either: + (+@) PLLSAI1CLK output is configured or + (+@) PLLSAI2CLK output is configured or + (+@) PLLSAI3CLK output is configured or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_SAI1_CLOCK_VALUE or EXTERNAL_SAI2_CLOCK_VALUE + in the stm32h7rsxx_hal_conf.h file. + + [..] + (@) In master Tx mode: enabling the audio block immediately generates the bit clock + for the external slaves even if there is no data in the FIFO, However FS signal + generation is conditioned by the presence of data in the FIFO. + + [..] + (@) In master Rx mode: enabling the audio block immediately generates the bit clock + and FS signal for the external slaves. + + [..] + (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior: + (+@) First bit Offset <= (SLOT size - Data size) + (+@) Data size <= SLOT size + (+@) Number of SLOT x SLOT size = Frame length + (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected. + + [..] + (@) PDM interface can be activated through HAL_SAI_Init function. + Please note that PDM interface is only available for SAI1 sub-block A. + PDM microphone delays can be tuned with HAL_SAIEx_ConfigPdmMicDelay function. + + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SAI_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SAI_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SAI_Transmit_IT() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SAI_Receive_IT() + (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback() + (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback() + + *** DMA mode IO operation *** + ============================= + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SAI_Transmit_DMA() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SAI_Receive_DMA() + (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback() + (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback() + (+) Pause the DMA Transfer using HAL_SAI_DMAPause() + (+) Resume the DMA Transfer using HAL_SAI_DMAResume() + (+) Stop the DMA Transfer using HAL_SAI_DMAStop() + + *** SAI HAL driver additional function list *** + =============================================== + [..] + Below the list the others API available SAI HAL driver : + + (+) HAL_SAI_EnableTxMuteMode(): Enable the mute in tx mode + (+) HAL_SAI_DisableTxMuteMode(): Disable the mute in tx mode + (+) HAL_SAI_EnableRxMuteMode(): Enable the mute in Rx mode + (+) HAL_SAI_DisableRxMuteMode(): Disable the mute in Rx mode + (+) HAL_SAI_FlushRxFifo(): Flush the rx fifo. + (+) HAL_SAI_Abort(): Abort the current transfer + + *** SAI HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SAI HAL driver : + + (+) __HAL_SAI_ENABLE(): Enable the SAI peripheral + (+) __HAL_SAI_DISABLE(): Disable the SAI peripheral + (+) __HAL_SAI_ENABLE_IT(): Enable the specified SAI interrupts + (+) __HAL_SAI_DISABLE_IT(): Disable the specified SAI interrupts + (+) __HAL_SAI_GET_IT_SOURCE(): Check if the specified SAI interrupt source is + enabled or disabled + (+) __HAL_SAI_GET_FLAG(): Check whether the specified SAI flag is set or not + + *** Callback registration *** + ============================= + [..] + The compilation define USE_HAL_SAI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use functions HAL_SAI_RegisterCallback() to register a user callback. + + [..] + Function HAL_SAI_RegisterCallback() allows to register following callbacks: + (+) RxCpltCallback : SAI receive complete. + (+) RxHalfCpltCallback : SAI receive half complete. + (+) TxCpltCallback : SAI transmit complete. + (+) TxHalfCpltCallback : SAI transmit half complete. + (+) ErrorCallback : SAI error. + (+) MspInitCallback : SAI MspInit. + (+) MspDeInitCallback : SAI MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_SAI_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_SAI_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) RxCpltCallback : SAI receive complete. + (+) RxHalfCpltCallback : SAI receive half complete. + (+) TxCpltCallback : SAI transmit complete. + (+) TxHalfCpltCallback : SAI transmit half complete. + (+) ErrorCallback : SAI error. + (+) MspInitCallback : SAI MspInit. + (+) MspDeInitCallback : SAI MspDeInit. + + [..] + By default, after the HAL_SAI_Init and if the state is HAL_SAI_STATE_RESET + all callbacks are reset to the corresponding legacy weak functions: + examples HAL_SAI_RxCpltCallback(), HAL_SAI_ErrorCallback(). + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak functions in the HAL_SAI_Init + and HAL_SAI_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SAI_Init and HAL_SAI_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SAI_RegisterCallback before calling HAL_SAI_DeInit + or HAL_SAI_Init function. + + [..] + When the compilation define USE_HAL_SAI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak callbacks are used. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SAI SAI + * @brief SAI HAL module driver + * @{ + */ + +#ifdef HAL_SAI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup SAI_Private_Typedefs SAI Private Typedefs + * @{ + */ +typedef enum +{ + SAI_MODE_DMA, + SAI_MODE_IT +} SAI_ModeTypedef; +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup SAI_Private_Constants SAI Private Constants + * @{ + */ +#define SAI_DEFAULT_TIMEOUT 4U +#define SAI_LONG_TIMEOUT 1000U +#define SAI_SPDIF_FRAME_LENGTH 64U +#define SAI_AC97_FRAME_LENGTH 256U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SAI_Private_Functions SAI Private Functions + * @{ + */ +static void SAI_FillFifo(SAI_HandleTypeDef *hsai); +static uint32_t SAI_InterruptFlag(const SAI_HandleTypeDef *hsai, SAI_ModeTypedef mode); +static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); +static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); + +static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai); + +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMAError(DMA_HandleTypeDef *hdma); +static void SAI_DMAAbort(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup SAI_Exported_Functions SAI Exported Functions + * @{ + */ + +/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SAIx peripheral: + + (+) User must implement HAL_SAI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SAI_Init() to configure the selected device with + the selected configuration: + (++) Mode (Master/slave TX/RX) + (++) Protocol + (++) Data Size + (++) MCLK Output + (++) Audio frequency + (++) FIFO Threshold + (++) Frame Config + (++) Slot Config + (++) PDM Config + + (+) Call the function HAL_SAI_DeInit() to restore the default configuration + of the selected SAI peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the structure FrameInit, SlotInit and the low part of + * Init according to the specified parameters and call the function + * HAL_SAI_Init to initialize the SAI block. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol @ref SAI_Protocol + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize + * the configuration information for SAI module. + * @param nbslot Number of slot. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol)); + assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize)); + + switch (protocol) + { + case SAI_I2S_STANDARD : + case SAI_I2S_MSBJUSTIFIED : + case SAI_I2S_LSBJUSTIFIED : + status = SAI_InitI2S(hsai, protocol, datasize, nbslot); + break; + case SAI_PCM_LONG : + case SAI_PCM_SHORT : + status = SAI_InitPCM(hsai, protocol, datasize, nbslot); + break; + default : + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + status = HAL_SAI_Init(hsai); + } + + return status; +} + +/** + * @brief Initialize the SAI according to the specified parameters. + * in the SAI_InitTypeDef structure and initialize the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) +{ + uint32_t tmpregisterGCR; + uint32_t ckstr_bits; + uint32_t syncen_bits; + + /* Check the SAI handle allocation */ + if (hsai == NULL) + { + return HAL_ERROR; + } + + /* check the instance */ + assert_param(IS_SAI_ALL_INSTANCE(hsai->Instance)); + + /* Check the SAI Block parameters */ + assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency)); + assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol)); + assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode)); + assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize)); + assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit)); + assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing)); + assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro)); + assert_param(IS_SAI_BLOCK_MCK_OUTPUT(hsai->Init.MckOutput)); + assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive)); + assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider)); + assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold)); + assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode)); + assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode)); + assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState)); + assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt)); + assert_param(IS_SAI_BLOCK_MCK_OVERSAMPLING(hsai->Init.MckOverSampling)); + + /* Check the SAI Block Frame parameters */ + assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength)); + assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength)); + assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition)); + assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity)); + assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset)); + + /* Check the SAI Block Slot parameters */ + assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset)); + assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize)); + assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber)); + assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive)); + + /* Check the SAI PDM parameters */ + assert_param(IS_FUNCTIONAL_STATE(hsai->Init.PdmInit.Activation)); + if (hsai->Init.PdmInit.Activation == ENABLE) + { + assert_param(IS_SAI_PDM_MIC_PAIRS_NUMBER(hsai->Init.PdmInit.MicPairsNbr)); + assert_param(IS_SAI_PDM_CLOCK_ENABLE(hsai->Init.PdmInit.ClockEnable)); + /* Check that SAI sub-block is SAI1 sub-block A, in master RX mode with free protocol */ + if ((hsai->Instance != SAI1_Block_A) || + (hsai->Init.AudioMode != SAI_MODEMASTER_RX) || + (hsai->Init.Protocol != SAI_FREE_PROTOCOL)) + { + return HAL_ERROR; + } + } + + if (hsai->State == HAL_SAI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsai->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; + hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; + hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; + hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; + hsai->ErrorCallback = HAL_SAI_ErrorCallback; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + if (hsai->MspInitCallback == NULL) + { + hsai->MspInitCallback = HAL_SAI_MspInit; + } + hsai->MspInitCallback(hsai); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_SAI_MspInit(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + + /* Disable the selected SAI peripheral */ + if (SAI_Disable(hsai) != HAL_OK) + { + return HAL_ERROR; + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* SAI Block Synchro Configuration -----------------------------------------*/ + /* This setting must be done with both audio block (A & B) disabled */ + switch (hsai->Init.SynchroExt) + { + case SAI_SYNCEXT_DISABLE : + tmpregisterGCR = 0; + break; + case SAI_SYNCEXT_OUTBLOCKA_ENABLE : + tmpregisterGCR = SAI_GCR_SYNCOUT_0; + break; + case SAI_SYNCEXT_OUTBLOCKB_ENABLE : + tmpregisterGCR = SAI_GCR_SYNCOUT_1; + break; + default : + tmpregisterGCR = 0; + break; + } + + switch (hsai->Init.Synchro) + { + case SAI_ASYNCHRONOUS : + syncen_bits = 0; + break; + case SAI_SYNCHRONOUS : + syncen_bits = SAI_xCR1_SYNCEN_0; + break; + case SAI_SYNCHRONOUS_EXT_SAI1 : + syncen_bits = SAI_xCR1_SYNCEN_1; + break; + case SAI_SYNCHRONOUS_EXT_SAI2 : + syncen_bits = SAI_xCR1_SYNCEN_1; + tmpregisterGCR |= SAI_GCR_SYNCIN_0; + break; + default : + syncen_bits = 0; + break; + } + + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) + { + SAI1->GCR = tmpregisterGCR; + } + else + { + SAI2->GCR = tmpregisterGCR; + } + + if (hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV) + { + uint32_t freq = 0; + uint32_t tmpval; + + /* In this case, the MCKDIV value is calculated to get AudioFrequency */ + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1); + } + if ((hsai->Instance == SAI2_Block_A) || (hsai->Instance == SAI2_Block_B)) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2); + } + + /* Configure Master Clock Divider using the following formula : + - If NODIV = 1 : + MCKDIV[5:0] = SAI_CK_x / (FS * (FRL + 1)) + - If NODIV = 0 : + MCKDIV[5:0] = SAI_CK_x / (FS * (OSR + 1) * 256) */ + if (hsai->Init.NoDivider == SAI_MASTERDIVIDER_DISABLE) + { + /* NODIV = 1 */ + uint32_t tmpframelength; + + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + /* For SPDIF protocol, frame length is set by hardware to 64 */ + tmpframelength = SAI_SPDIF_FRAME_LENGTH; + } + else if (hsai->Init.Protocol == SAI_AC97_PROTOCOL) + { + /* For AC97 protocol, frame length is set by hardware to 256 */ + tmpframelength = SAI_AC97_FRAME_LENGTH; + } + else + { + /* For free protocol, frame length is set by user */ + tmpframelength = hsai->FrameInit.FrameLength; + } + + /* (freq x 10) to keep Significant digits */ + tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * tmpframelength); + } + else + { + /* NODIV = 0 */ + uint32_t tmposr; + tmposr = (hsai->Init.MckOverSampling == SAI_MCK_OVERSAMPLING_ENABLE) ? 2U : 1U; + /* (freq x 10) to keep Significant digits */ + tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * tmposr * 256U); + } + hsai->Init.Mckdiv = tmpval / 10U; + + /* Round result to the nearest integer */ + if ((tmpval % 10U) > 8U) + { + hsai->Init.Mckdiv += 1U; + } + + /* For SPDIF protocol, SAI shall provide a bit clock twice faster the symbol-rate */ + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + hsai->Init.Mckdiv = hsai->Init.Mckdiv >> 1; + } + } + + /* Check the SAI Block master clock divider parameter */ + assert_param(IS_SAI_BLOCK_MASTER_DIVIDER(hsai->Init.Mckdiv)); + + /* Compute CKSTR bits of SAI CR1 according ClockStrobing and AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? 0U : SAI_xCR1_CKSTR; + } + else + { + /* Receive */ + ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? SAI_xCR1_CKSTR : 0U; + } + + /* SAI Block Configuration -------------------------------------------------*/ + /* SAI CR1 Configuration */ + hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \ + SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN | \ + SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \ + SAI_xCR1_NODIV | SAI_xCR1_MCKDIV | SAI_xCR1_OSR | \ + SAI_xCR1_MCKEN); + + hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \ + hsai->Init.DataSize | hsai->Init.FirstBit | \ + ckstr_bits | syncen_bits | \ + hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \ + hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | \ + hsai->Init.MckOverSampling | hsai->Init.MckOutput); + + /* SAI CR2 Configuration */ + hsai->Instance->CR2 &= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL); + hsai->Instance->CR2 |= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState); + + /* SAI Frame Configuration -----------------------------------------*/ + hsai->Instance->FRCR &= (~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \ + SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF)); + hsai->Instance->FRCR |= ((hsai->FrameInit.FrameLength - 1U) | + hsai->FrameInit.FSOffset | + hsai->FrameInit.FSDefinition | + hsai->FrameInit.FSPolarity | + ((hsai->FrameInit.ActiveFrameLength - 1U) << 8)); + + /* SAI Block_x SLOT Configuration ------------------------------------------*/ + /* This register has no meaning in AC 97 and SPDIF audio protocol */ + hsai->Instance->SLOTR &= (~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \ + SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN)); + + hsai->Instance->SLOTR |= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize | \ + (hsai->SlotInit.SlotActive << 16) | ((hsai->SlotInit.SlotNumber - 1U) << 8); + + /* SAI PDM Configuration ---------------------------------------------------*/ + if (hsai->Instance == SAI1_Block_A) + { + /* Disable PDM interface */ + SAI1->PDMCR &= ~(SAI_PDMCR_PDMEN); + if (hsai->Init.PdmInit.Activation == ENABLE) + { + /* Configure and enable PDM interface */ + SAI1->PDMCR = (hsai->Init.PdmInit.ClockEnable | + ((hsai->Init.PdmInit.MicPairsNbr - 1U) << SAI_PDMCR_MICNBR_Pos)); + SAI1->PDMCR |= SAI_PDMCR_PDMEN; + } + } + + /* Initialize the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief DeInitialize the SAI peripheral. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai) +{ + /* Check the SAI handle allocation */ + if (hsai == NULL) + { + return HAL_ERROR; + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* Disabled All interrupt and clear all the flag */ + hsai->Instance->IMR = 0; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable the SAI */ + if (SAI_Disable(hsai) != HAL_OK) + { + /* Reset SAI state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Disable SAI PDM interface */ + if (hsai->Instance == SAI1_Block_A) + { + /* Reset PDM delays */ + SAI1->PDMDLY = 0U; + + /* Disable PDM interface */ + SAI1->PDMCR &= ~(SAI_PDMCR_PDMEN); + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + if (hsai->MspDeInitCallback == NULL) + { + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + } + hsai->MspDeInitCallback(hsai); +#else + HAL_SAI_MspDeInit(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + + /* Initialize the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State = HAL_SAI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Initialize the SAI MSP. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SAI MSP. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user SAI callback + * to be used instead of the weak predefined callback. + * @param hsai SAI handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. + * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. + * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. + * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. + * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. + * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID, + pSAI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + else + { + if (HAL_SAI_STATE_READY == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_RX_COMPLETE_CB_ID : + hsai->RxCpltCallback = pCallback; + break; + case HAL_SAI_RX_HALFCOMPLETE_CB_ID : + hsai->RxHalfCpltCallback = pCallback; + break; + case HAL_SAI_TX_COMPLETE_CB_ID : + hsai->TxCpltCallback = pCallback; + break; + case HAL_SAI_TX_HALFCOMPLETE_CB_ID : + hsai->TxHalfCpltCallback = pCallback; + break; + case HAL_SAI_ERROR_CB_ID : + hsai->ErrorCallback = pCallback; + break; + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = pCallback; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SAI_STATE_RESET == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = pCallback; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user SAI callback. + * SAI callback is redirected to the weak predefined callback. + * @param hsai SAI handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. + * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. + * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. + * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. + * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. + * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SAI_STATE_READY == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_RX_COMPLETE_CB_ID : + hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; + break; + case HAL_SAI_RX_HALFCOMPLETE_CB_ID : + hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; + break; + case HAL_SAI_TX_COMPLETE_CB_ID : + hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; + break; + case HAL_SAI_TX_HALFCOMPLETE_CB_ID : + hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; + break; + case HAL_SAI_ERROR_CB_ID : + hsai->ErrorCallback = HAL_SAI_ErrorCallback; + break; + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = HAL_SAI_MspInit; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SAI_STATE_RESET == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = HAL_SAI_MspInit; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + return status; +} +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SAI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SAI data + transfers. + + (+) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (+) Blocking mode functions are : + (++) HAL_SAI_Transmit() + (++) HAL_SAI_Receive() + + (+) Non Blocking mode functions with Interrupt are : + (++) HAL_SAI_Transmit_IT() + (++) HAL_SAI_Receive_IT() + + (+) Non Blocking mode functions with DMA are : + (++) HAL_SAI_Transmit_DMA() + (++) HAL_SAI_Receive_DMA() + + (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_SAI_TxCpltCallback() + (++) HAL_SAI_RxCpltCallback() + (++) HAL_SAI_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t temp; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->pBuffPtr = pData; + hsai->State = HAL_SAI_STATE_BUSY_TX; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* fill the fifo with data before to enabled the SAI */ + SAI_FillFifo(hsai); + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + while (hsai->XferCount > 0U) + { + /* Write data if the FIFO is not full */ + if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + else + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + hsai->XferCount--; + } + else + { + /* Check for the Timeout */ + if ((((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) && (Timeout != HAL_MAX_DELAY)) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Clear all the flags */ + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable SAI peripheral */ + /* No need to check return value because state update, unlock and error return will be performed later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + } + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t temp; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->State = HAL_SAI_STATE_BUSY_RX; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Receive data */ + while (hsai->XferCount > 0U) + { + if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + *hsai->pBuffPtr = (uint8_t)hsai->Instance->DR; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + } + else + { + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 16); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 24); + hsai->pBuffPtr++; + } + hsai->XferCount--; + } + else + { + /* Check for the Timeout */ + if ((((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) && (Timeout != HAL_MAX_DELAY)) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Clear all the flags */ + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable SAI peripheral */ + /* No need to check return value because state update, unlock and error return will be performed later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + } + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_TX; + + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit; + } + else + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit; + } + + /* Fill the fifo before starting the communication */ + SAI_FillFifo(hsai); + + /* Enable FRQ and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_RX; + + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit; + } + else + { + hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit; + } + + /* Enable TXE and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Pause the audio file playing by disabling the SAI DMA requests */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Resume the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Enable the SAI DMA requests */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* If the SAI peripheral is still not enabled, enable it */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Stop the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Disable SAI peripheral */ + if (SAI_Disable(hsai) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Abort the SAI Tx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_TX) && (hsai->hdmatx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) + { + /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Abort the SAI Rx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) + { + /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Set hsai state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return status; +} + +/** + * @brief Abort the current transfer and disable the SAI. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Disable SAI peripheral */ + if (SAI_Disable(hsai) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check SAI DMA is enabled or not */ + if ((hsai->Instance->CR1 & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Abort the SAI Tx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_TX) && (hsai->hdmatx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) + { + /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Abort the SAI Rx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) + { + /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + } + + /* Disabled All interrupt and clear all the flag */ + hsai->Instance->IMR = 0; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Set hsai state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return status; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + uint32_t dmaSrcSize; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_TX; + + /* Set the SAI Tx DMA Half transfer complete callback */ + hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt; + + /* Set the SAI TxDMA transfer complete callback */ + hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt; + + /* Set the DMA error callback */ + hsai->hdmatx->XferErrorCallback = SAI_DMAError; + + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = NULL; + + /* For transmission, the DMA source is data buffer. + We have to compute DMA size of a source block transfer in bytes according SAI data size. */ + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + dmaSrcSize = (uint32_t) Size; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + dmaSrcSize = 2U * (uint32_t) Size; + } + else + { + dmaSrcSize = 4U * (uint32_t) Size; + } + + /* Enable the Tx DMA Stream */ + if ((hsai->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hsai->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hsai->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = dmaSrcSize; + + /* Set DMA source address */ + hsai->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hsai->pBuffPtr; + + /* Set DMA destination address */ + hsai->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hsai->Instance->DR; + + status = HAL_DMAEx_List_Start_IT(hsai->hdmatx); + } + else + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hsai->hdmatx, (uint32_t)hsai->pBuffPtr, (uint32_t)&hsai->Instance->DR, dmaSrcSize); + } + + if (status != HAL_OK) + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + + /* Enable the interrupts for error handling */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + /* Enable SAI Tx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Wait until FIFO is not empty */ + while ((hsai->Instance->SR & SAI_xSR_FLVL) == SAI_FIFOSTATUS_EMPTY) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > SAI_LONG_TIMEOUT) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_TIMEOUT; + } + } + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + uint32_t dmaSrcSize; + + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_RX; + + /* Set the SAI Rx DMA Half transfer complete callback */ + hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt; + + /* Set the SAI Rx DMA transfer complete callback */ + hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt; + + /* Set the DMA error callback */ + hsai->hdmarx->XferErrorCallback = SAI_DMAError; + + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = NULL; + + /* For reception, the DMA source is SAI DR register. + We have to compute DMA size of a source block transfer in bytes according SAI data size. */ + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + dmaSrcSize = (uint32_t) Size; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + dmaSrcSize = 2U * (uint32_t) Size; + } + else + { + dmaSrcSize = 4U * (uint32_t) Size; + } + + /* Enable the Rx DMA Stream */ + if ((hsai->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hsai->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hsai->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = dmaSrcSize; + + /* Set DMA source address */ + hsai->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hsai->Instance->DR; + + /* Set DMA destination address */ + hsai->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hsai->pBuffPtr; + + status = HAL_DMAEx_List_Start_IT(hsai->hdmarx); + } + else + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, (uint32_t)hsai->pBuffPtr, dmaSrcSize); + } + + if (status != HAL_OK) + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + + /* Enable the interrupts for error handling */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + /* Enable SAI Rx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Tx mute mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param val value sent during the mute @ref SAI_Block_Mute_Value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val) +{ + assert_param(IS_SAI_BLOCK_MUTE_VALUE(val)); + + if (hsai->State != HAL_SAI_STATE_RESET) + { + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); + SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | (uint32_t)val); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Disable the Tx mute mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Enable the Rx mute detection. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param callback function called when the mute is detected. + * @param counter number a data before mute detection max 63. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter) +{ + assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter)); + + if (hsai->State != HAL_SAI_STATE_RESET) + { + /* set the mute counter */ + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT); + SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_Pos)); + hsai->mutecallback = callback; + /* enable the IT interrupt */ + __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Disable the Rx mute detection. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + /* set the mutecallback to NULL */ + hsai->mutecallback = NULL; + /* enable the IT interrupt */ + __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Handle SAI interrupt request. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + uint32_t itflags = hsai->Instance->SR; + uint32_t itsources = hsai->Instance->IMR; + uint32_t cr1config = hsai->Instance->CR1; + uint32_t tmperror; + + /* SAI Fifo request interrupt occurred -----------------------------------*/ + if (((itflags & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((itsources & SAI_IT_FREQ) == SAI_IT_FREQ)) + { + hsai->InterruptServiceRoutine(hsai); + } + /* SAI Overrun error interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((itsources & SAI_IT_OVRUDR) == SAI_IT_OVRUDR)) + { + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + /* Get the SAI error code */ + tmperror = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR); + /* Change the SAI error code */ + hsai->ErrorCode |= tmperror; + /* the transfer is not stopped, we will forward the information to the user and we let + the user decide what needs to be done */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + /* SAI mutedet interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((itsources & SAI_IT_MUTEDET) == SAI_IT_MUTEDET)) + { + /* Clear the SAI mutedet flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET); + /* call the call back function */ + if (hsai->mutecallback != NULL) + { + /* inform the user that an RX mute event has been detected */ + hsai->mutecallback(); + } + } + /* SAI AFSDET interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET)) + { + /* Clear the SAI AFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_AFSDET); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Abort SAI */ + /* No need to check return value because HAL_SAI_ErrorCallback will be called later */ + (void) HAL_SAI_Abort(hsai); + + /* Set error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + /* SAI LFSDET interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET)) + { + /* Clear the SAI LFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_LFSDET); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Abort SAI */ + /* No need to check return value because HAL_SAI_ErrorCallback will be called later */ + (void) HAL_SAI_Abort(hsai); + + /* Set error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + /* SAI WCKCFG interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG)) + { + /* Clear the SAI WCKCFG flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_WCKCFG); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + } + else + { + /* If WCKCFG occurs, SAI audio block is automatically disabled */ + /* Disable all interrupts and clear all flags */ + hsai->Instance->IMR = 0U; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + /* Set the SAI state to ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + } + /* SAI CNRDY interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((itsources & SAI_IT_CNRDY) == SAI_IT_CNRDY)) + { + /* Clear the SAI CNRDY flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY); + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_CNREADY; + /* the transfer is not stopped, we will forward the information to the user and we let + the user decide what needs to be done */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer Half completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SAI error callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SAI handle state. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL state + */ +HAL_SAI_StateTypeDef HAL_SAI_GetState(const SAI_HandleTypeDef *hsai) +{ + return hsai->State; +} + +/** + * @brief Return the SAI error code. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for the specified SAI Block. + * @retval SAI Error Code + */ +uint32_t HAL_SAI_GetError(const SAI_HandleTypeDef *hsai) +{ + return hsai->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SAI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief Initialize the SAI I2S protocol according to the specified parameters + * in the SAI_InitTypeDef and create the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol. + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize. + * @param nbslot number of slot minimum value is 2 and max is 16. + * the value must be a multiple of 2. + * @retval HAL status + */ +static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status = HAL_OK; + + hsai->Init.Protocol = SAI_FREE_PROTOCOL; + hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; + /* Compute ClockStrobing according AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + } + else + { + /* Receive */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; + } + hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION; + hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; + hsai->SlotInit.FirstBitOffset = 0; + hsai->SlotInit.SlotNumber = nbslot; + + /* in IS2 the number of slot must be even */ + if ((nbslot & 0x1U) != 0U) + { + return HAL_ERROR; + } + + if (protocol == SAI_I2S_STANDARD) + { + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; + hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; + } + else + { + /* SAI_I2S_MSBJUSTIFIED or SAI_I2S_LSBJUSTIFIED */ + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; + hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT; + } + + /* Frame definition */ + switch (datasize) + { + case SAI_PROTOCOL_DATASIZE_16BIT: + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 32U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 16U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; + break; + case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_24BIT: + hsai->Init.DataSize = SAI_DATASIZE_24; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_32BIT: + hsai->Init.DataSize = SAI_DATASIZE_32; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + default : + status = HAL_ERROR; + break; + } + if (protocol == SAI_I2S_LSBJUSTIFIED) + { + if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) + { + hsai->SlotInit.FirstBitOffset = 16; + } + if (datasize == SAI_PROTOCOL_DATASIZE_24BIT) + { + hsai->SlotInit.FirstBitOffset = 8; + } + } + return status; +} + +/** + * @brief Initialize the SAI PCM protocol according to the specified parameters + * in the SAI_InitTypeDef and create the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize + * @param nbslot number of slot minimum value is 1 and the max is 16. + * @retval HAL status + */ +static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status = HAL_OK; + + hsai->Init.Protocol = SAI_FREE_PROTOCOL; + hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; + /* Compute ClockStrobing according AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; + } + else + { + /* Receive */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + } + hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME; + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; + hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; + hsai->SlotInit.FirstBitOffset = 0; + hsai->SlotInit.SlotNumber = nbslot; + hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; + + if (protocol == SAI_PCM_SHORT) + { + hsai->FrameInit.ActiveFrameLength = 1; + } + else + { + /* SAI_PCM_LONG */ + hsai->FrameInit.ActiveFrameLength = 13; + } + + switch (datasize) + { + case SAI_PROTOCOL_DATASIZE_16BIT: + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 16U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; + break; + case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_24BIT : + hsai->Init.DataSize = SAI_DATASIZE_24; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_32BIT: + hsai->Init.DataSize = SAI_DATASIZE_32; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + default : + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Fill the fifo. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_FillFifo(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* fill the fifo with data before to enabled the SAI */ + while (((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0U)) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + else + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + hsai->XferCount--; + } +} + +/** + * @brief Return the interrupt flag to set according the SAI setup. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param mode SAI_MODE_DMA or SAI_MODE_IT + * @retval the list of the IT flag to enable + */ +static uint32_t SAI_InterruptFlag(const SAI_HandleTypeDef *hsai, SAI_ModeTypedef mode) +{ + uint32_t tmpIT = SAI_IT_OVRUDR; + + if (mode == SAI_MODE_IT) + { + tmpIT |= SAI_IT_FREQ; + } + + if ((hsai->Init.Protocol == SAI_AC97_PROTOCOL) && + ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX))) + { + tmpIT |= SAI_IT_CNRDY; + } + + if ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + tmpIT |= SAI_IT_AFSDET | SAI_IT_LFSDET; + } + else + { + /* hsai has been configured in master mode */ + tmpIT |= SAI_IT_WCKCFG; + } + return tmpIT; +} + +/** + * @brief Disable the SAI and wait for the disabling. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai) +{ + uint32_t count = SAI_DEFAULT_TIMEOUT * (SystemCoreClock / 7U / 1000U); + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the SAI instance */ + __HAL_SAI_DISABLE(hsai); + + do + { + /* Check for the Timeout */ + if (count == 0U) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + break; + } + count--; + } while ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != 0U); + + return status; +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode 8-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + else + { + /* Write data on DR register */ + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + hsai->XferCount--; + } +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode for 16-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + else + { + /* Write data on DR register */ + uint32_t temp; + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + hsai->XferCount--; + } +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode for 32-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } + else + { + /* Write data on DR register */ + uint32_t temp; + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + hsai->XferCount--; + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode 8-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai) +{ + /* Receive data */ + *hsai->pBuffPtr = (uint8_t)hsai->Instance->DR; + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode for 16-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* Receive data */ + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode for 32-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* Receive data */ + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 16); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 24); + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA SAI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Check if DMA in circular mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + hsai->XferCount = 0; + + /* Disable SAI Tx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + + /* Stop the interrupts error handling */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + hsai->State = HAL_SAI_STATE_READY; + } + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SAI transmit process half complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxHalfCpltCallback(hsai); +#else + HAL_SAI_TxHalfCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SAI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Check if DMA in circular mode*/ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + /* Disable Rx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + hsai->XferCount = 0; + + /* Stop the interrupts error handling */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + hsai->State = HAL_SAI_STATE_READY; + } + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SAI receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxHalfCpltCallback(hsai); +#else + HAL_SAI_RxHalfCpltCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SAI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMAError(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Disable SAI peripheral */ + /* No need to check return value because state will be updated and HAL_SAI_ErrorCallback will be called later */ + (void) SAI_Disable(hsai); + + /* Set the SAI state ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error Callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SAI Abort callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMAAbort(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Disable all interrupts and clear all flags */ + hsai->Instance->IMR = 0U; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + if (hsai->ErrorCode != HAL_SAI_ERROR_WCKCFG) + { + /* Disable SAI peripheral */ + /* No need to check return value because state will be updated and HAL_SAI_ErrorCallback will be called later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + } + /* Set the SAI state to ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error Callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_SAI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai_ex.c new file mode 100644 index 000000000..e1bbaec65 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sai_ex.c @@ -0,0 +1,129 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sai_ex.c + * @author MCD Application Team + * @brief SAI Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionality of the SAI Peripheral Controller: + * + Modify PDM microphone delays. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#ifdef HAL_SAI_MODULE_ENABLED + +/** @defgroup SAIEx SAIEx + * @brief SAI Extended HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SAIEx_Private_Defines SAIEx Extended Private Defines + * @{ + */ +#define SAI_PDM_DELAY_MASK 0x77U +#define SAI_PDM_DELAY_OFFSET 8U +#define SAI_PDM_RIGHT_DELAY_OFFSET 4U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SAIEx_Exported_Functions SAIEx Extended Exported Functions + * @{ + */ + +/** @defgroup SAIEx_Exported_Functions_Group1 Peripheral Control functions + * @brief SAIEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Modify PDM microphone delays + +@endverbatim + * @{ + */ + +/** + * @brief Configure PDM microphone delays. + * @param hsai SAI handle. + * @param pdmMicDelay Microphone delays configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(const SAI_HandleTypeDef *hsai, + const SAIEx_PdmMicDelayParamTypeDef *pdmMicDelay) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t offset; + + /* Check that SAI sub-block is SAI1 sub-block A */ + if (hsai->Instance != SAI1_Block_A) + { + status = HAL_ERROR; + } + else + { + /* Check microphone delay parameters */ + assert_param(IS_SAI_PDM_MIC_PAIRS_NUMBER(pdmMicDelay->MicPair)); + assert_param(IS_SAI_PDM_MIC_DELAY(pdmMicDelay->LeftDelay)); + assert_param(IS_SAI_PDM_MIC_DELAY(pdmMicDelay->RightDelay)); + + /* Compute offset on PDMDLY register according mic pair number */ + offset = SAI_PDM_DELAY_OFFSET * (pdmMicDelay->MicPair - 1U); + + /* Check SAI state and offset */ + if ((hsai->State != HAL_SAI_STATE_RESET) && (offset <= 24U)) + { + /* Reset current delays for specified microphone */ + SAI1->PDMDLY &= ~(SAI_PDM_DELAY_MASK << offset); + + /* Apply new microphone delays */ + SAI1->PDMDLY |= (((pdmMicDelay->RightDelay << SAI_PDM_RIGHT_DELAY_OFFSET) | pdmMicDelay->LeftDelay) << offset); + } + else + { + status = HAL_ERROR; + } + } + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SAI_MODULE_ENABLED */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd.c new file mode 100644 index 000000000..761af23d2 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd.c @@ -0,0 +1,4070 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sd.c + * @author MCD Application Team + * @brief SD card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by + the user in HAL_SD_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDMMC memories which uses the HAL + SDMMC driver functions to interface with SD and uSD cards devices. + It is used as follows: + + (#)Initialize the SDMMC low level resources by implementing the HAL_SD_MspInit() API: + (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE(); + (##) SDMMC pins configuration for SD card + (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) NVIC configuration if you need to use interrupt process (HAL_SD_ReadBlocks_IT() + and HAL_SD_WriteBlocks_IT() APIs). + (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority(); + (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDMMC interrupts are managed using the macros __HAL_SD_ENABLE_IT() + and __HAL_SD_DISABLE_IT() inside the communication process. + (+++) SDMMC interrupts pending bits are managed using the macros __HAL_SD_GET_IT() + and __HAL_SD_CLEAR_IT() + (##) No general propose DMA Configuration is needed, an Internal DMA for SDMMC Peripheral are used. + + (#) At this stage, you can perform SD read/write/erase operations after SD card initialization + + *** SD Card Initialization and configuration *** + ================================================ + [..] + To initialize the SD Card, use the HAL_SD_Init() function. It Initializes + SDMMC Peripheral(STM32 side) and the SD Card, and put it into StandBy State (Ready for data transfer). + This function provide the following operations: + + (#) Apply the SD Card initialization process at 400KHz and check the SD Card + type (Standard Capacity or High Capacity). You can change or adapt this + frequency by adjusting the "ClockDiv" field. + The SD Card frequency (SDMMC_CK) is computed as follows: + + SDMMC_CK = SDMMCCLK / (2 * ClockDiv) + + In initialization mode and according to the SD Card standard, + make sure that the SDMMC_CK frequency doesn't exceed 400KHz. + + This phase of initialization is done through SDMMC_Init() and + SDMMC_PowerState_ON() SDMMC low level APIs. + + (#) Initialize the SD card. The API used is HAL_SD_InitCard(). + This phase allows the card initialization and identification + and check the SD Card type (Standard Capacity or High Capacity) + The initialization flow is compatible with SD standard. + + This API (HAL_SD_InitCard()) could be used also to reinitialize the card in case + of plug-off plug-in. + + (#) Configure the SD Card Data transfer frequency. You can change or adapt this + frequency by adjusting the "ClockDiv" field. + In transfer mode and according to the SD Card standard, make sure that the + SDMMC_CK frequency doesn't exceed 25MHz and 100MHz in High-speed mode switch. + + (#) Select the corresponding SD Card according to the address read with the step 2. + + (#) Configure the SD Card in wide bus mode: 4-bits data. + + *** SD Card Read operation *** + ============================== + [..] + (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Rx interrupt event. + + (+) You can read from SD card in Interrupt mode by using function HAL_SD_ReadBlocks_IT(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Rx interrupt event. + + *** SD Card Write operation *** + =============================== + [..] + (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Tx interrupt event. + + (+) You can write to SD card in Interrupt mode by using function HAL_SD_WriteBlocks_IT(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Tx interrupt event. + + *** SD card status *** + ====================== + [..] + (+) The SD Status contains status bits that are related to the SD Memory + Card proprietary features. To get SD card status use the HAL_SD_GetCardStatus(). + + *** SD card information *** + =========================== + [..] + (+) To get SD card information, you can use the function HAL_SD_GetCardInfo(). + It returns useful information about the SD card such as block size, card type, + block number ... + + *** SD card CSD register *** + ============================ + (+) The HAL_SD_GetCardCSD() API allows to get the parameters of the CSD register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD card CID register *** + ============================ + (+) The HAL_SD_GetCardCID() API allows to get the parameters of the CID register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SD HAL driver. + + (+) __HAL_SD_ENABLE_IT: Enable the SD device interrupt + (+) __HAL_SD_DISABLE_IT: Disable the SD device interrupt + (+) __HAL_SD_GET_FLAG:Check whether the specified SD flag is set or not + (+) __HAL_SD_CLEAR_FLAG: Clear the SD's pending flags + + (@) You can refer to the SD HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SD_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + For specific callbacks TransceiverCallback use dedicated register callbacks: + respectively HAL_SD_RegisterTransceiverCallback(). + + Use function HAL_SD_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMALnkLstBufCpltCallback : callback when the DMA reception of linked list node buffer is completed. + (+) Write_DMALnkLstBufCpltCallback : callback when the DMA transmission of linked list node buffer is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + For specific callbacks TransceiverCallback use dedicated unregister callbacks: + respectively HAL_SD_UnRegisterTransceiverCallback(). + + By default, after the HAL_SD_Init and if the state is HAL_SD_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SD_Init + and HAL_SD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SD_Init and HAL_SD_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SD_RegisterCallback before calling HAL_SD_DeInit + or HAL_SD_Init function. + + When The compilation define USE_HAL_SD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup SD + * @{ + */ + +#if defined (SDMMC1) || defined (SDMMC2) +#ifdef HAL_SD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup SD_Private_Defines + * @{ + */ +/* Frequencies used in the driver for clock divider calculation */ +#define SD_INIT_FREQ 400000U /* Initialization phase : 400 kHz max */ +#define SD_NORMAL_SPEED_FREQ 25000000U /* Normal speed phase : 25 MHz max */ +#define SD_HIGH_SPEED_FREQ 50000000U /* High speed phase : 50 MHz max */ +/* Private macro -------------------------------------------------------------*/ +#if defined (DLYB_SDMMC1) && defined (DLYB_SDMMC2) +#define SD_GET_DLYB_INSTANCE(SDMMC_INSTANCE) (((SDMMC_INSTANCE) == SDMMC1)? \ + DLYB_SDMMC1 : DLYB_SDMMC2 ) +#elif defined (DLYB_SDMMC1) +#define SD_GET_DLYB_INSTANCE(SDMMC_INSTANCE) ( DLYB_SDMMC1 ) +#endif /* (DLYB_SDMMC1) && defined (DLYB_SDMMC2) */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd); +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd); +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus); +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd); +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd); +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR); +static void SD_PowerOFF(SD_HandleTypeDef *hsd); +static void SD_Write_IT(SD_HandleTypeDef *hsd); +static void SD_Read_IT(SD_HandleTypeDef *hsd); +static uint32_t SD_SwitchSpeed(SD_HandleTypeDef *hsd, uint32_t SwitchSpeedMode); +#if (USE_SD_TRANSCEIVER != 0U) +static uint32_t SD_UltraHighSpeed(SD_HandleTypeDef *hsd, uint32_t UltraHighSpeedMode); +static uint32_t SD_DDR_Mode(SD_HandleTypeDef *hsd); +#endif /* USE_SD_TRANSCEIVER */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SD_Exported_Functions + * @{ + */ + +/** @addtogroup SD_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the SD + card device to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SD according to the specified parameters in the + SD_HandleTypeDef and create the associated handle. + * @param hsd: Pointer to the SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStatusTypeDef CardStatus; + uint32_t speedgrade; + uint32_t unitsize; + uint32_t tickstart; + + /* Check the SD handle allocation */ + if (hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hsd->Instance)); + assert_param(IS_SDMMC_CLOCK_EDGE(hsd->Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(hsd->Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(hsd->Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(hsd->Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(hsd->Init.ClockDiv)); + + if (hsd->State == HAL_SD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsd->Lock = HAL_UNLOCKED; + +#if (USE_SD_TRANSCEIVER != 0U) + /* Force SDMMC_TRANSCEIVER_PRESENT for Legacy usage */ + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_UNKNOWN) + { + hsd->Init.TranceiverPresent = SDMMC_TRANSCEIVER_PRESENT; + } +#endif /*USE_SD_TRANSCEIVER */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_SD_STATE_RESET only */ + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + hsd->ErrorCallback = HAL_SD_ErrorCallback; + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + hsd->Read_DMALnkLstBufCpltCallback = HAL_SDEx_Read_DMALnkLstBufCpltCallback; + hsd->Write_DMALnkLstBufCpltCallback = HAL_SDEx_Write_DMALnkLstBufCpltCallback; +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } +#endif /* USE_SD_TRANSCEIVER */ + + if (hsd->MspInitCallback == NULL) + { + hsd->MspInitCallback = HAL_SD_MspInit; + } + + /* Init the low level hardware */ + hsd->MspInitCallback(hsd); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_SD_MspInit(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + + hsd->State = HAL_SD_STATE_PROGRAMMING; + + /* Initialize the Card parameters */ + if (HAL_SD_InitCard(hsd) != HAL_OK) + { + return HAL_ERROR; + } + + if (HAL_SD_GetCardStatus(hsd, &CardStatus) != HAL_OK) + { + return HAL_ERROR; + } + /* Get Initial Card Speed from Card Status*/ + speedgrade = CardStatus.UhsSpeedGrade; + unitsize = CardStatus.UhsAllocationUnitSize; + if ((hsd->SdCard.CardType == CARD_SDHC_SDXC) && ((speedgrade != 0U) || (unitsize != 0U))) + { + hsd->SdCard.CardSpeed = CARD_ULTRA_HIGH_SPEED; + } + else + { + if (hsd->SdCard.CardType == CARD_SDHC_SDXC) + { + hsd->SdCard.CardSpeed = CARD_HIGH_SPEED; + } + else + { + hsd->SdCard.CardSpeed = CARD_NORMAL_SPEED; + } + + } + /* Configure the bus wide */ + if (HAL_SD_ConfigWideBusOperation(hsd, hsd->Init.BusWide) != HAL_OK) + { + return HAL_ERROR; + } + + /* Verify that SD card is ready to use after Initialization */ + tickstart = HAL_GetTick(); + while ((HAL_SD_GetCardState(hsd) != HAL_SD_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Initialize the error code */ + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + /* Initialize the SD operation */ + hsd->Context = SD_CONTEXT_NONE; + + /* Initialize the SD state */ + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the SD Card. + * @param hsd: Pointer to SD handle + * @note This function initializes the SD card. It could be used when a card + re-initialization is needed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate; + SD_InitTypeDef Init; + uint32_t sdmmc_clk; + + /* Default SDMMC peripheral configuration for SD card initialization */ + Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = SDMMC_BUS_WIDE_1B; + Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + + /* Init Clock should be less or equal to 400Khz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC12); + if (sdmmc_clk == 0U) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode = SDMMC_ERROR_INVALID_PARAMETER; + return HAL_ERROR; + } + Init.ClockDiv = sdmmc_clk / (2U * SD_INIT_FREQ); + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = hsd->Init.TranceiverPresent; + + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + /* Set Transceiver polarity */ + hsd->Instance->POWER |= SDMMC_POWER_DIRPOL; + } +#elif defined (USE_SD_DIRPOL) + /* Set Transceiver polarity */ + hsd->Instance->POWER |= SDMMC_POWER_DIRPOL; +#endif /* USE_SD_TRANSCEIVER */ + + /* Initialize SDMMC peripheral interface with default configuration */ + (void)SDMMC_Init(hsd->Instance, Init); + + /* Set Power State to ON */ + (void)SDMMC_PowerState_ON(hsd->Instance); + + /* wait 74 Cycles: required power up waiting time before starting + the SD initialization sequence */ + if (Init.ClockDiv != 0U) + { + sdmmc_clk = sdmmc_clk / (2U * Init.ClockDiv); + } + + if (sdmmc_clk != 0U) + { + HAL_Delay(1U + (74U * 1000U / (sdmmc_clk))); + } + + /* Identify card operating voltage */ + errorstate = SD_PowerON(hsd); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Card initialization */ + errorstate = SD_InitCard(hsd); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief De-Initializes the SD card. + * @param hsd: Pointer to SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd) +{ + /* Check the SD handle allocation */ + if (hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hsd->Instance)); + + hsd->State = HAL_SD_STATE_BUSY; + +#if (USE_SD_TRANSCEIVER != 0U) + /* Deactivate the 1.8V Mode */ + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + if (hsd->DriveTransceiver_1_8V_Callback == NULL) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } + hsd->DriveTransceiver_1_8V_Callback(RESET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(RESET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } +#endif /* USE_SD_TRANSCEIVER */ + + /* Set SD power state to off */ + SD_PowerOFF(hsd); + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + if (hsd->MspDeInitCallback == NULL) + { + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + } + + /* DeInit the low level hardware */ + hsd->MspDeInitCallback(hsd); +#else + /* De-Initialize the MSP layer */ + HAL_SD_MspDeInit(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the SD MSP. + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize SD MSP. + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to SD card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param pData: pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of SD blocks to read + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, + uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Read block(s) in polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = SD_CONTEXT_READ_SINGLE_BLOCK; + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + dataremaining = config.DataLength; + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hsd->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /* Send stop transmission command in case of multiblock read */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param pData: pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of SD blocks to write + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + const uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = SD_CONTEXT_WRITE_SINGLE_BLOCK; + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= SDMMC_FIFO_SIZE)) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*tempbuff); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 8U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 16U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 24U); + tempbuff++; + (void)SDMMC_WriteFIFO(hsd->Instance, &data); + } + dataremaining -= SDMMC_FIFO_SIZE; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /* Send stop transmission command in case of multiblock write */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Rx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pRxBuffPtr = pData; + hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Read Blocks in IT mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_IT); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_RXFIFOHF)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Tx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pTxBuffPtr = pData; + hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_IT); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_TXFIFOHE)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Rx + * interrupt event. + * @param hsd: Pointer SD handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pRxBuffPtr = pData; + hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + hsd->Instance->IDMABASER = (uint32_t) pData ; + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Read Blocks in DMA mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Tx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pTxBuffPtr = pData; + hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= BLOCKSIZE; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMABASER = (uint32_t) pData ; + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Erases the specified memory area of the given SD card. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param BlockStartAdd: Start Block address + * @param BlockEndAdd: End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if (end_add < start_add) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (end_add > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Check if the card command class supports erase command */ + if (((hsd->SdCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Get start and end block for high capacity cards */ + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + start_add *= BLOCKSIZE; + end_add *= BLOCKSIZE; + } + + /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ + errorstate = SDMMC_CmdSDEraseStartAdd(hsd->Instance, start_add); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ + errorstate = SDMMC_CmdSDEraseEndAdd(hsd->Instance, end_add); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + + /* Send CMD38 ERASE */ + errorstate = SDMMC_CmdErase(hsd->Instance, 0UL); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles SD card interrupt request. + * @param hsd: Pointer to SD handle + * @retval None + */ +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate; + uint32_t context = hsd->Context; + + /* Check for SDMMC interrupt flags */ + if ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF) != RESET) && ((context & SD_CONTEXT_IT) != 0U)) + { + SD_Read_IT(hsd); + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DATAEND); + + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR | SDMMC_IT_TXFIFOHE | \ + SDMMC_IT_RXFIFOHF); + + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_IDMABTC); + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + if ((context & SD_CONTEXT_IT) != 0U) + { + if (((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else if ((context & SD_CONTEXT_DMA) != 0U) + { + hsd->Instance->DLEN = 0; + hsd->Instance->DCTRL = 0; + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + if (((context & SD_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE) != RESET) && ((context & SD_CONTEXT_IT) != 0U)) + { + SD_Write_IT(hsd); + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_RXOVERR | + SDMMC_FLAG_TXUNDERR) != RESET) + { + /* Set Error code */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_DCRCFAIL) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_DTIMEOUT) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_RXOVERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_TXUNDERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + } + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Disable all interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + hsd->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + hsd->Instance->CMD |= SDMMC_CMD_CMDSTOP; + hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); + hsd->Instance->CMD &= ~(SDMMC_CMD_CMDSTOP); + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DABORT); + + if ((context & SD_CONTEXT_IT) != 0U) + { + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else if ((context & SD_CONTEXT_DMA) != 0U) + { + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + /* Disable Internal DMA */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_IDMABTC); + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_IDMABTC) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_IDMABTC); + + if ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Write_DMALnkLstBufCpltCallback(hsd); +#else + HAL_SDEx_Write_DMALnkLstBufCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else /* SD_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Read_DMALnkLstBufCpltCallback(hsd); +#else + HAL_SDEx_Read_DMALnkLstBufCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief return the SD state + * @param hsd: Pointer to sd handle + * @retval HAL state + */ +HAL_SD_StateTypeDef HAL_SD_GetState(const SD_HandleTypeDef *hsd) +{ + return hsd->State; +} + +/** + * @brief Return the SD error code + * @param hsd : Pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval SD Error Code + */ +uint32_t HAL_SD_GetError(const SD_HandleTypeDef *hsd) +{ + return hsd->ErrorCode; +} + +/** + * @brief Tx Transfer completed callbacks + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief SD error callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief SD Abort callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_AbortCallback can be implemented in the user file + */ +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Enable/Disable the SD Transceiver 1.8V Mode Callback. + * @param status: Voltage Switch State + * @retval None + */ +__weak void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(status); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_EnableTransceiver could be implemented in the user file + */ +} +#endif /* USE_SD_TRANSCEIVER */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SD Callback + * To be used instead of the weak (overridden) predefined callback + * @note The HAL_SD_RegisterCallback() may be called before HAL_SD_Init() in + * HAL_SD_STATE_RESET to register callbacks for HAL_SD_MSP_INIT_CB_ID + * and HAL_SD_MSP_DEINIT_CB_ID. + * @param hsd : SD handle + * @param CallbackID : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_READ_DMA_LNKLST_BUF_CPLT_CB_ID SD DMA Rx Linked List Node buffer Callback ID + * @arg @ref HAL_SD_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID SD DMA Tx Linked List Node buffer Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, + pSD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackID) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = pCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = pCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = pCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = pCallback; + break; + case HAL_SD_READ_DMA_LNKLST_BUF_CPLT_CB_ID : + hsd->Read_DMALnkLstBufCpltCallback = pCallback; + break; + case HAL_SD_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID : + hsd->Write_DMALnkLstBufCpltCallback = pCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SD Callback + * SD Callback is redirected to the weak (overridden) predefined callback + * @note The HAL_SD_UnRegisterCallback() may be called before HAL_SD_Init() in + * HAL_SD_STATE_RESET to register callbacks for HAL_SD_MSP_INIT_CB_ID + * and HAL_SD_MSP_DEINIT_CB_ID. + * @param hsd : SD handle + * @param CallbackID : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_READ_DMA_LNKLST_BUF_CPLT_CB_ID SD DMA Rx Linked List Node buffer Callback ID + * @arg @ref HAL_SD_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID SD DMA Tx Linked List Node buffer Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackID) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = HAL_SD_ErrorCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + break; + case HAL_SD_READ_DMA_LNKLST_BUF_CPLT_CB_ID : + hsd->Read_DMALnkLstBufCpltCallback = HAL_SDEx_Read_DMALnkLstBufCpltCallback; + break; + case HAL_SD_WRITE_DMA_LNKLST_BUF_CPLT_CB_ID : + hsd->Write_DMALnkLstBufCpltCallback = HAL_SDEx_Write_DMALnkLstBufCpltCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Register a User SD Transceiver Callback + * To be used instead of the weak (overridden) predefined callback + * @param hsd : SD handle + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback(SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsd); + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->DriveTransceiver_1_8V_Callback = pCallback; + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} + +/** + * @brief Unregister a User SD Transceiver Callback + * SD Callback is redirected to the weak (overridden) predefined callback + * @param hsd : SD handle + * @retval status + */ +HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsd); + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} +#endif /* USE_SD_TRANSCEIVER */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the SD card + operations and get the related information + +@endverbatim + * @{ + */ + +/** + * @brief Returns information the information of the card which are stored on + * the CID register. + * @param hsd: Pointer to SD handle + * @param pCID: Pointer to a HAL_SD_CardCIDTypeDef structure that + * contains all CID register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID) +{ + pCID->ManufacturerID = (uint8_t)((hsd->CID[0] & 0xFF000000U) >> 24U); + + pCID->OEM_AppliID = (uint16_t)((hsd->CID[0] & 0x00FFFF00U) >> 8U); + + pCID->ProdName1 = (((hsd->CID[0] & 0x000000FFU) << 24U) | ((hsd->CID[1] & 0xFFFFFF00U) >> 8U)); + + pCID->ProdName2 = (uint8_t)(hsd->CID[1] & 0x000000FFU); + + pCID->ProdRev = (uint8_t)((hsd->CID[2] & 0xFF000000U) >> 24U); + + pCID->ProdSN = (((hsd->CID[2] & 0x00FFFFFFU) << 8U) | ((hsd->CID[3] & 0xFF000000U) >> 24U)); + + pCID->Reserved1 = (uint8_t)((hsd->CID[3] & 0x00F00000U) >> 20U); + + pCID->ManufactDate = (uint16_t)((hsd->CID[3] & 0x000FFF00U) >> 8U); + + pCID->CID_CRC = (uint8_t)((hsd->CID[3] & 0x000000FEU) >> 1U); + + pCID->Reserved2 = 1U; + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the CSD register. + * @param hsd: Pointer to SD handle + * @param pCSD: Pointer to a HAL_SD_CardCSDTypeDef structure that + * contains all CSD register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD) +{ + pCSD->CSDStruct = (uint8_t)((hsd->CSD[0] & 0xC0000000U) >> 30U); + + pCSD->SysSpecVersion = (uint8_t)((hsd->CSD[0] & 0x3C000000U) >> 26U); + + pCSD->Reserved1 = (uint8_t)((hsd->CSD[0] & 0x03000000U) >> 24U); + + pCSD->TAAC = (uint8_t)((hsd->CSD[0] & 0x00FF0000U) >> 16U); + + pCSD->NSAC = (uint8_t)((hsd->CSD[0] & 0x0000FF00U) >> 8U); + + pCSD->MaxBusClkFrec = (uint8_t)(hsd->CSD[0] & 0x000000FFU); + + pCSD->CardComdClasses = (uint16_t)((hsd->CSD[1] & 0xFFF00000U) >> 20U); + + pCSD->RdBlockLen = (uint8_t)((hsd->CSD[1] & 0x000F0000U) >> 16U); + + pCSD->PartBlockRead = (uint8_t)((hsd->CSD[1] & 0x00008000U) >> 15U); + + pCSD->WrBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00004000U) >> 14U); + + pCSD->RdBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00002000U) >> 13U); + + pCSD->DSRImpl = (uint8_t)((hsd->CSD[1] & 0x00001000U) >> 12U); + + pCSD->Reserved2 = 0U; /*!< Reserved */ + + if (hsd->SdCard.CardType == CARD_SDSC) + { + pCSD->DeviceSize = (((hsd->CSD[1] & 0x000003FFU) << 2U) | ((hsd->CSD[2] & 0xC0000000U) >> 30U)); + + pCSD->MaxRdCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x38000000U) >> 27U); + + pCSD->MaxRdCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x07000000U) >> 24U); + + pCSD->MaxWrCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x00E00000U) >> 21U); + + pCSD->MaxWrCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x001C0000U) >> 18U); + + pCSD->DeviceSizeMul = (uint8_t)((hsd->CSD[2] & 0x00038000U) >> 15U); + + hsd->SdCard.BlockNbr = (pCSD->DeviceSize + 1U) ; + hsd->SdCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U)); + hsd->SdCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU)); + + hsd->SdCard.LogBlockNbr = (hsd->SdCard.BlockNbr) * ((hsd->SdCard.BlockSize) / BLOCKSIZE); + hsd->SdCard.LogBlockSize = BLOCKSIZE; + } + else if (hsd->SdCard.CardType == CARD_SDHC_SDXC) + { + /* Byte 7 */ + pCSD->DeviceSize = (((hsd->CSD[1] & 0x0000003FU) << 16U) | ((hsd->CSD[2] & 0xFFFF0000U) >> 16U)); + + hsd->SdCard.BlockNbr = ((pCSD->DeviceSize + 1U) * 1024U); + hsd->SdCard.LogBlockNbr = hsd->SdCard.BlockNbr; + hsd->SdCard.BlockSize = BLOCKSIZE; + hsd->SdCard.LogBlockSize = hsd->SdCard.BlockSize; + } + else + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + pCSD->EraseGrSize = (uint8_t)((hsd->CSD[2] & 0x00004000U) >> 14U); + + pCSD->EraseGrMul = (uint8_t)((hsd->CSD[2] & 0x00003F80U) >> 7U); + + pCSD->WrProtectGrSize = (uint8_t)(hsd->CSD[2] & 0x0000007FU); + + pCSD->WrProtectGrEnable = (uint8_t)((hsd->CSD[3] & 0x80000000U) >> 31U); + + pCSD->ManDeflECC = (uint8_t)((hsd->CSD[3] & 0x60000000U) >> 29U); + + pCSD->WrSpeedFact = (uint8_t)((hsd->CSD[3] & 0x1C000000U) >> 26U); + + pCSD->MaxWrBlockLen = (uint8_t)((hsd->CSD[3] & 0x03C00000U) >> 22U); + + pCSD->WriteBlockPaPartial = (uint8_t)((hsd->CSD[3] & 0x00200000U) >> 21U); + + pCSD->Reserved3 = 0; + + pCSD->ContentProtectAppli = (uint8_t)((hsd->CSD[3] & 0x00010000U) >> 16U); + + pCSD->FileFormatGroup = (uint8_t)((hsd->CSD[3] & 0x00008000U) >> 15U); + + pCSD->CopyFlag = (uint8_t)((hsd->CSD[3] & 0x00004000U) >> 14U); + + pCSD->PermWrProtect = (uint8_t)((hsd->CSD[3] & 0x00002000U) >> 13U); + + pCSD->TempWrProtect = (uint8_t)((hsd->CSD[3] & 0x00001000U) >> 12U); + + pCSD->FileFormat = (uint8_t)((hsd->CSD[3] & 0x00000C00U) >> 10U); + + pCSD->ECC = (uint8_t)((hsd->CSD[3] & 0x00000300U) >> 8U); + + pCSD->CSD_CRC = (uint8_t)((hsd->CSD[3] & 0x000000FEU) >> 1U); + + pCSD->Reserved4 = 1; + + return HAL_OK; +} + +/** + * @brief Gets the SD status info.( shall be called if there is no SD transaction ongoing ) + * @param hsd: Pointer to SD handle + * @param pStatus: Pointer to the HAL_SD_CardStatusTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus) +{ + uint32_t sd_status[16]; + uint32_t errorstate; + HAL_StatusTypeDef status = HAL_OK; + + if (hsd->State == HAL_SD_STATE_BUSY) + { + return HAL_ERROR; + } + + errorstate = SD_SendSDStatus(hsd, sd_status); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + status = HAL_ERROR; + } + else + { + pStatus->DataBusWidth = (uint8_t)((sd_status[0] & 0xC0U) >> 6U); + + pStatus->SecuredMode = (uint8_t)((sd_status[0] & 0x20U) >> 5U); + + pStatus->CardType = (uint16_t)(((sd_status[0] & 0x00FF0000U) >> 8U) | ((sd_status[0] & 0xFF000000U) >> 24U)); + + pStatus->ProtectedAreaSize = (((sd_status[1] & 0xFFU) << 24U) | ((sd_status[1] & 0xFF00U) << 8U) | + ((sd_status[1] & 0xFF0000U) >> 8U) | ((sd_status[1] & 0xFF000000U) >> 24U)); + + pStatus->SpeedClass = (uint8_t)(sd_status[2] & 0xFFU); + + pStatus->PerformanceMove = (uint8_t)((sd_status[2] & 0xFF00U) >> 8U); + + pStatus->AllocationUnitSize = (uint8_t)((sd_status[2] & 0xF00000U) >> 20U); + + pStatus->EraseSize = (uint16_t)(((sd_status[2] & 0xFF000000U) >> 16U) | (sd_status[3] & 0xFFU)); + + pStatus->EraseTimeout = (uint8_t)((sd_status[3] & 0xFC00U) >> 10U); + + pStatus->EraseOffset = (uint8_t)((sd_status[3] & 0x0300U) >> 8U); + + pStatus->UhsSpeedGrade = (uint8_t)((sd_status[3] & 0x00F0U) >> 4U); + pStatus->UhsAllocationUnitSize = (uint8_t)(sd_status[3] & 0x000FU) ; + pStatus->VideoSpeedClass = (uint8_t)((sd_status[4] & 0xFF000000U) >> 24U); + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode = errorstate; + hsd->State = HAL_SD_STATE_READY; + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Gets the SD card info. + * @param hsd: Pointer to SD handle + * @param pCardInfo: Pointer to the HAL_SD_CardInfoTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo) +{ + pCardInfo->CardType = (uint32_t)(hsd->SdCard.CardType); + pCardInfo->CardVersion = (uint32_t)(hsd->SdCard.CardVersion); + pCardInfo->Class = (uint32_t)(hsd->SdCard.Class); + pCardInfo->RelCardAdd = (uint32_t)(hsd->SdCard.RelCardAdd); + pCardInfo->BlockNbr = (uint32_t)(hsd->SdCard.BlockNbr); + pCardInfo->BlockSize = (uint32_t)(hsd->SdCard.BlockSize); + pCardInfo->LogBlockNbr = (uint32_t)(hsd->SdCard.LogBlockNbr); + pCardInfo->LogBlockSize = (uint32_t)(hsd->SdCard.LogBlockSize); + + return HAL_OK; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hsd: Pointer to SD handle + * @param WideMode: Specifies the SD card wide bus mode + * This parameter can be one of the following values: + * @arg SDMMC_BUS_WIDE_8B: 8-bit data transfer + * @arg SDMMC_BUS_WIDE_4B: 4-bit data transfer + * @arg SDMMC_BUS_WIDE_1B: 1-bit data transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode) +{ + SDMMC_InitTypeDef Init; + uint32_t errorstate; + uint32_t sdmmc_clk; + + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_SDMMC_BUS_WIDE(WideMode)); + + /* Change State */ + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SECURED) + { + if (WideMode == SDMMC_BUS_WIDE_8B) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + else if (WideMode == SDMMC_BUS_WIDE_4B) + { + errorstate = SD_WideBus_Enable(hsd); + + hsd->ErrorCode |= errorstate; + } + else if (WideMode == SDMMC_BUS_WIDE_1B) + { + errorstate = SD_WideBus_Disable(hsd); + + hsd->ErrorCode |= errorstate; + } + else + { + /* WideMode is not a valid argument*/ + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + } + } + else + { + /* SD Card does not support this feature */ + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + status = HAL_ERROR; + } + else + { + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC12); + if (sdmmc_clk != 0U) + { + /* Configure the SDMMC peripheral */ + Init.ClockEdge = hsd->Init.ClockEdge; + Init.ClockPowerSave = hsd->Init.ClockPowerSave; + Init.BusWide = WideMode; + Init.HardwareFlowControl = hsd->Init.HardwareFlowControl; + + /* Check if user Clock div < Normal speed 25Mhz, no change in Clockdiv */ + if (hsd->Init.ClockDiv >= (sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ))) + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + else if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* UltraHigh speed SD card,user Clock div */ + Init.ClockDiv = hsd->Init.ClockDiv; + } + else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) + { + /* High speed SD card, Max Frequency = 50Mhz */ + if (hsd->Init.ClockDiv == 0U) + { + if (sdmmc_clk > SD_HIGH_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + else + { + if ((sdmmc_clk / (2U * hsd->Init.ClockDiv)) > SD_HIGH_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + } + else + { + /* No High speed SD card, Max Frequency = 25Mhz */ + if (hsd->Init.ClockDiv == 0U) + { + if (sdmmc_clk > SD_NORMAL_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + else + { + if ((sdmmc_clk / (2U * hsd->Init.ClockDiv)) > SD_NORMAL_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + } + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = hsd->Init.TranceiverPresent; +#endif /* USE_SD_TRANSCEIVER */ + + (void)SDMMC_Init(hsd->Instance, Init); + } + else + { + hsd->ErrorCode |= SDMMC_ERROR_INVALID_PARAMETER; + status = HAL_ERROR; + } + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + status = HAL_ERROR; + } + + /* Change State */ + hsd->State = HAL_SD_STATE_READY; + + return status; +} + +/** + * @brief Configure the speed bus mode + * @param hsd: Pointer to the SD handle + * @param SpeedMode: Specifies the SD card speed bus mode + * This parameter can be one of the following values: + * @arg SDMMC_SPEED_MODE_AUTO: Max speed mode supported by the card + * @arg SDMMC_SPEED_MODE_DEFAULT: Default Speed/SDR12 mode + * @arg SDMMC_SPEED_MODE_HIGH: High Speed/SDR25 mode + * @arg SDMMC_SPEED_MODE_ULTRA: Ultra high speed mode + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode) +{ + uint32_t tickstart; + uint32_t errorstate; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_SDMMC_SPEED_MODE(SpeedMode)); + /* Change State */ + hsd->State = HAL_SD_STATE_BUSY; + +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + /* Enable Ultra High Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR104_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + } + else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_ULTRA_SDR104: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable UltraHigh Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR104_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_ULTRA_SDR50: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable UltraHigh Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR50_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DDR: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable DDR Mode*/ + if (SD_DDR_Mode(hsd) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED | SDMMC_CLKCR_DDR; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } + } + else + { + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + case SDMMC_SPEED_MODE_ULTRA: /*not valid without transceiver*/ + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } + } +#else + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + case SDMMC_SPEED_MODE_ULTRA: /*not valid without transceiver*/ + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } +#endif /* USE_SD_TRANSCEIVER */ + + /* Verify that SD card is ready to use after Speed mode switch*/ + tickstart = HAL_GetTick(); + while ((HAL_SD_GetCardState(hsd) != HAL_SD_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + status = HAL_ERROR; + } + + /* Change State */ + hsd->State = HAL_SD_STATE_READY; + return status; +} + +/** + * @brief Gets the current sd card data state. + * @param hsd: pointer to SD handle + * @retval Card state + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd) +{ + uint32_t cardstate; + uint32_t errorstate; + uint32_t resp1 = 0; + + errorstate = SD_SendStatus(hsd, &resp1); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; + } + + cardstate = ((resp1 >> 9U) & 0x0FU); + + return (HAL_SD_CardStateTypeDef)cardstate; +} + +/** + * @brief Abort the current transfer and disable the SD. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd) +{ + uint32_t error_code; + uint32_t tickstart; + + if (hsd->State == HAL_SD_STATE_BUSY) + { + /* DIsable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /*we will send the CMD12 in all cases in order to stop the data transfers*/ + /*In case the data transfer just finished , the external memory will not respond + and will return HAL_SD_ERROR_CMD_RSP_TIMEOUT*/ + /*In case the data transfer aborted , the external memory will respond and will return HAL_SD_ERROR_NONE*/ + /*Other scenario will return HAL_ERROR*/ + + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + error_code = hsd->ErrorCode; + if ((error_code != HAL_SD_ERROR_NONE) && (error_code != HAL_SD_ERROR_CMD_RSP_TIMEOUT)) + { + return HAL_ERROR; + } + + tickstart = HAL_GetTick(); + if ((hsd->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_CARD) + { + if (hsd->ErrorCode == HAL_SD_ERROR_NONE) + { + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DABORT | SDMMC_FLAG_BUSYD0END)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + + if (hsd->ErrorCode == HAL_SD_ERROR_CMD_RSP_TIMEOUT) + { + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + else if ((hsd->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_SDMMC) + { + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DABORT | SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + else + { + /* Nothing to do*/ + } + + /*The reason of all these while conditions previously is that we need to wait the SDMMC and clear + the appropriate flags that will be set depending of the abort/non abort of the memory */ + /*Not waiting the SDMMC flags will cause the next SDMMC_DISABLE_IDMA to not get cleared + and will result in next SDMMC read/write operation to fail */ + + /*SDMMC ready for clear data flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_BUSYD0END); + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + /* If IDMA Context, disable Internal DMA */ + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + hsd->State = HAL_SD_STATE_READY; + + /* Initialize the SD operation */ + hsd->Context = SD_CONTEXT_NONE; + } + return HAL_OK; +} + +/** + * @brief Abort the current transfer and disable the SD (IT mode). + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypeDef CardState; + + /* Disable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + /* If IDMA Context, disable Internal DMA */ + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + CardState = HAL_SD_GetCardState(hsd); + hsd->State = HAL_SD_STATE_READY; + + if ((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + } + + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + return HAL_ERROR; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief Initializes the sd card. + * @param hsd: Pointer to SD handle + * @retval SD Card error state + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardCSDTypeDef CSD; + uint32_t errorstate; + uint16_t sd_rca = 0U; + uint32_t tickstart = HAL_GetTick(); + + /* Check the power State */ + if (SDMMC_GetPowerState(hsd->Instance) == 0U) + { + /* Power off */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD2 ALL_SEND_CID */ + errorstate = SDMMC_CmdSendCID(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card identification number data */ + hsd->CID[0U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + hsd->CID[1U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2); + hsd->CID[2U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3); + hsd->CID[3U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4); + } + } + + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD3 SET_REL_ADDR with argument 0 */ + /* SD Card publishes its RCA. */ + while (sd_rca == 0U) + { + errorstate = SDMMC_CmdSetRelAdd(hsd->Instance, &sd_rca); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + if ((HAL_GetTick() - tickstart) >= SDMMC_CMDTIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + } + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Get the SD card RCA */ + hsd->SdCard.RelCardAdd = sd_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + errorstate = SDMMC_CmdSendCSD(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card Specific Data */ + hsd->CSD[0U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + hsd->CSD[1U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2); + hsd->CSD[2U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3); + hsd->CSD[3U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4); + } + } + + /* Get the Card Class */ + hsd->SdCard.Class = (SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2) >> 20U); + + /* Get CSD parameters */ + if (HAL_SD_GetCardCSD(hsd, &CSD) != HAL_OK) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Select the Card */ + errorstate = SDMMC_CmdSelDesel(hsd->Instance, (uint32_t)(((uint32_t)hsd->SdCard.RelCardAdd) << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* All cards are initialized */ + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores SD information that will be needed in future + * in the SD handle. + * @param hsd: Pointer to SD handle + * @retval error state + */ +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd) +{ + __IO uint32_t count = 0U; + uint32_t response = 0U; + uint32_t validvoltage = 0U; + uint32_t errorstate; +#if (USE_SD_TRANSCEIVER != 0U) + uint32_t tickstart = HAL_GetTick(); +#endif /* USE_SD_TRANSCEIVER */ + + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* CMD8: SEND_IF_COND: Command available only on V2.0 cards */ + errorstate = SDMMC_CmdOperCond(hsd->Instance); + if (errorstate == SDMMC_ERROR_TIMEOUT) /* No response to CMD8 */ + { + hsd->SdCard.CardVersion = CARD_V1_X; + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + } + else + { + hsd->SdCard.CardVersion = CARD_V2_X; + } + + if (hsd->SdCard.CardVersion == CARD_V2_X) + { + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0); + if (errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + } + /* SD CARD */ + /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ + while ((count < SDMMC_MAX_VOLT_TRIAL) && (validvoltage == 0U)) + { + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send CMD41 */ + errorstate = SDMMC_CmdAppOperCommand(hsd->Instance, SDMMC_VOLTAGE_WINDOW_SD | SDMMC_HIGH_CAPACITY | + SD_SWITCH_1_8V_CAPACITY); + if (errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Get command response */ + response = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + + count++; + } + + if (count >= SDMMC_MAX_VOLT_TRIAL) + { + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + + /* Set default card type */ + hsd->SdCard.CardType = CARD_SDSC; + + if ((response & SDMMC_HIGH_CAPACITY) == SDMMC_HIGH_CAPACITY) + { + hsd->SdCard.CardType = CARD_SDHC_SDXC; +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + if ((response & SD_SWITCH_1_8V_CAPACITY) == SD_SWITCH_1_8V_CAPACITY) + { + hsd->SdCard.CardSpeed = CARD_ULTRA_HIGH_SPEED; + + /* Start switching procedue */ + hsd->Instance->POWER |= SDMMC_POWER_VSWITCHEN; + + /* Send CMD11 to switch 1.8V mode */ + errorstate = SDMMC_CmdVoltageSwitch(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Check to CKSTOP */ + while ((hsd->Instance->STA & SDMMC_FLAG_CKSTOP) != SDMMC_FLAG_CKSTOP) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear CKSTOP Flag */ + hsd->Instance->ICR = SDMMC_FLAG_CKSTOP; + + /* Check to BusyD0 */ + if ((hsd->Instance->STA & SDMMC_FLAG_BUSYD0) != SDMMC_FLAG_BUSYD0) + { + /* Error when activate Voltage Switch in SDMMC Peripheral */ + return SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Enable Transceiver Switch PIN */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + + /* Switch ready */ + hsd->Instance->POWER |= SDMMC_POWER_VSWITCH; + + /* Check VSWEND Flag */ + while ((hsd->Instance->STA & SDMMC_FLAG_VSWEND) != SDMMC_FLAG_VSWEND) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear VSWEND Flag */ + hsd->Instance->ICR = SDMMC_FLAG_VSWEND; + + /* Check BusyD0 status */ + if ((hsd->Instance->STA & SDMMC_FLAG_BUSYD0) == SDMMC_FLAG_BUSYD0) + { + /* Error when enabling 1.8V mode */ + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + /* Switch to 1.8V OK */ + + /* Disable VSWITCH FLAG from SDMMC Peripheral */ + hsd->Instance->POWER = 0x13U; + + /* Clean Status flags */ + hsd->Instance->ICR = 0xFFFFFFFFU; + } + } + } +#endif /* USE_SD_TRANSCEIVER */ + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Turns the SDMMC output signals off. + * @param hsd: Pointer to SD handle + * @retval None + */ +static void SD_PowerOFF(SD_HandleTypeDef *hsd) +{ + /* Set Power State to OFF */ + (void)SDMMC_PowerState_OFF(hsd->Instance); +} + +/** + * @brief Send Status info command. + * @param hsd: pointer to SD handle + * @param pSDstatus: Pointer to the buffer that will contain the SD card status + * SD Status register) + * @retval error state + */ +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t *pData = pSDstatus; + + /* Check SD response */ + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Set block size for card if it is not equal to current block size for card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Send CMD55 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 64U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + /* Send ACMD13 (SD_APP_STAUS) with argument as card's RCA */ + errorstate = SDMMC_CmdStatusRegister(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Get status data */ + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + *pData = SDMMC_ReadFIFO(hsd->Instance); + pData++; + } + } + + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + return HAL_SD_ERROR_RX_OVERRUN; + } + else + { + /* Nothing to do */ + } + + while ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DPSMACT))) + { + *pData = SDMMC_ReadFIFO(hsd->Instance); + pData++; + + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear all the static status flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Returns the current card's status. + * @param hsd: Pointer to SD handle + * @param pCardStatus: pointer to the buffer that will contain the SD card + * status (Card Status register) + * @retval error state + */ +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus) +{ + uint32_t errorstate; + + if (pCardStatus == NULL) + { + return HAL_SD_ERROR_PARAM; + } + + /* Send Status command */ + errorstate = SDMMC_CmdSendStatus(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Get SD card status */ + *pCardStatus = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enables the SDMMC wide bus mode. + * @param hsd: pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0UL, 0UL}; + uint32_t errorstate; + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* If requested card supports wide bus operation */ + if ((scr[1U] & SDMMC_WIDE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA.*/ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 2U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + +/** + * @brief Disables the SDMMC wide bus mode. + * @param hsd: Pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0UL, 0UL}; + uint32_t errorstate; + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* If requested card supports 1 bit mode operation */ + if ((scr[1U] & SDMMC_SINGLE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 0U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + +/** + * @brief Finds the SD card SCR register value. + * @param hsd: Pointer to SD handle + * @param pSCR: pointer to the buffer that will contain the SCR value + * @retval error state + */ +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t index = 0U; + uint32_t tempscr[2U] = {0UL, 0UL}; + uint32_t *scr = pSCR; + + /* Set Block Size To 8 Bytes */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 8U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)((hsd->SdCard.RelCardAdd) << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 8U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_8B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ + errorstate = SDMMC_CmdSendSCR(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if ((!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOE)) && (index == 0U)) + { + tempscr[0] = SDMMC_ReadFIFO(hsd->Instance); + tempscr[1] = SDMMC_ReadFIFO(hsd->Instance); + index++; + } + + if ((HAL_GetTick() - tickstart) >= SDMMC_SWDATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + return HAL_SD_ERROR_RX_OVERRUN; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + *scr = (((tempscr[1] & SDMMC_0TO7BITS) << 24U) | ((tempscr[1] & SDMMC_8TO15BITS) << 8U) | \ + ((tempscr[1] & SDMMC_16TO23BITS) >> 8U) | ((tempscr[1] & SDMMC_24TO31BITS) >> 24U)); + scr++; + *scr = (((tempscr[0] & SDMMC_0TO7BITS) << 24U) | ((tempscr[0] & SDMMC_8TO15BITS) << 8U) | \ + ((tempscr[0] & SDMMC_16TO23BITS) >> 8U) | ((tempscr[0] & SDMMC_24TO31BITS) >> 24U)); + + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Wrap up reading in non-blocking mode. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void SD_Read_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count; + uint32_t data; + uint8_t *tmp; + + tmp = hsd->pRxBuffPtr; + + if (hsd->RxXferSize >= SDMMC_FIFO_SIZE) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = SDMMC_ReadFIFO(hsd->Instance); + *tmp = (uint8_t)(data & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 8U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 16U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 24U) & 0xFFU); + tmp++; + } + + hsd->pRxBuffPtr = tmp; + hsd->RxXferSize -= SDMMC_FIFO_SIZE; + } +} + +/** + * @brief Wrap up writing in non-blocking mode. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void SD_Write_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count; + uint32_t data; + const uint8_t *tmp; + + tmp = hsd->pTxBuffPtr; + + if (hsd->TxXferSize >= SDMMC_FIFO_SIZE) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < (SDMMC_FIFO_SIZE / 4U); count++) + { + data = (uint32_t)(*tmp); + tmp++; + data |= ((uint32_t)(*tmp) << 8U); + tmp++; + data |= ((uint32_t)(*tmp) << 16U); + tmp++; + data |= ((uint32_t)(*tmp) << 24U); + tmp++; + (void)SDMMC_WriteFIFO(hsd->Instance, &data); + } + + hsd->pTxBuffPtr = tmp; + hsd->TxXferSize -= SDMMC_FIFO_SIZE; + } +} + +/** + * @brief Switches the SD card to High Speed mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock between 25 and 50 MHz + * @param hsd: SD handle + * @param SwitchSpeedMode: SD speed mode( SDMMC_SDR12_SWITCH_PATTERN, SDMMC_SDR25_SWITCH_PATTERN) + * @retval SD Card error state + */ +uint32_t SD_SwitchSpeed(SD_HandleTypeDef *hsd, uint32_t SwitchSpeedMode) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed >= CARD_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + (void)SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure); + + errorstate = SDMMC_CmdSwitch(hsd->Instance, SwitchSpeedMode); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + if ((HAL_GetTick() - Timeout) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode HS is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + + } + + return errorstate; +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Switches the SD card to Ultra High Speed mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock between 50 and 120 MHz + * @param hsd: SD handle + * @param UltraHighSpeedMode: SD speed mode( SDMMC_SDR50_SWITCH_PATTERN, SDMMC_SDR104_SWITCH_PATTERN) + * @retval SD Card error state + */ +static uint32_t SD_UltraHighSpeed(SD_HandleTypeDef *hsd, uint32_t UltraHighSpeedMode) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + if (SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } + + errorstate = SDMMC_CmdSwitch(hsd->Instance, UltraHighSpeedMode); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + + if ((HAL_GetTick() - Timeout) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode HS is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) + /* Enable DelayBlock Peripheral */ + /* SDMMC_FB_CLK tuned feedback clock selected as receive clock, for SDR104 */ + MODIFY_REG(hsd->Instance->CLKCR, SDMMC_CLKCR_SELCLKRX, SDMMC_CLKCR_SELCLKRX_1); + LL_DLYB_Enable(SD_GET_DLYB_INSTANCE(hsd->Instance)); +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + } + } + + return errorstate; +} + +/** + * @brief Switches the SD card to Double Data Rate (DDR) mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock less than 50MHz + * @param hsd: SD handle + * @retval SD Card error state + */ +static uint32_t SD_DDR_Mode(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + if (SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } + + errorstate = SDMMC_CmdSwitch(hsd->Instance, SDMMC_DDR50_SWITCH_PATTERN); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + + if ((HAL_GetTick() - Timeout) >= SDMMC_SWDATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) + /* Enable DelayBlock Peripheral */ + /* SDMMC_CKin feedback clock selected as receive clock, for DDR50 */ + MODIFY_REG(hsd->Instance->CLKCR, SDMMC_CLKCR_SELCLKRX, SDMMC_CLKCR_SELCLKRX_0); + LL_DLYB_Enable(SD_GET_DLYB_INSTANCE(hsd->Instance)); +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + } + } + + return errorstate; +} + +#endif /* USE_SD_TRANSCEIVER */ + +/** + * @brief Read DMA Linked list node Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Read_DMALnkLstBufCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Read_DMALnkLstBufCpltCallback can be implemented in the user file + */ +} +/** + * @brief Read DMA Linked list node Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Write_DMALnkLstBufCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Write_DMALnkLstBufCpltCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd_ex.c new file mode 100644 index 000000000..ec9375d7d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sd_ex.c @@ -0,0 +1,393 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sd_ex.c + * @author MCD Application Team + * @brief SD card Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SD Extension HAL driver can be used as follows: + (+) Configure Buffer0 and Buffer1 start address and Buffer size using HAL_SDEx_ConfigDMAMultiBuffer() function. + (+) Start Read and Write for multibuffer mode using HAL_SDEx_ReadBlocksDMAMultiBuffer() + and HAL_SDEx_WriteBlocksDMAMultiBuffer() functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SDEx SDEx + * @brief SD Extended HAL module driver + * @{ + */ + +#if defined (SDMMC1) || defined (SDMMC2) +#ifdef HAL_SD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDEx_Exported_Functions + * @{ + */ + + +/** @addtogroup SDEx_Exported_Functions_Group1 + * @brief Linked List management functions + * +@verbatim + =============================================================================== + ##### Linked List management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed functions. + +@endverbatim + * @{ + */ + +/** + * @brief Build Linked List node. + * @param pNode: Pointer to new node to add. + * @param pNodeConf: Pointer to configuration parameters for new node to add. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_BuildNode(SD_DMALinkNodeTypeDef *pNode, SD_DMALinkNodeConfTypeDef *pNodeConf) +{ + + (void)SDMMC_DMALinkedList_BuildNode(pNode, pNodeConf); + + return (HAL_OK); + +} + +/** + * @brief Insert new Linked List node. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pPrevNode: Pointer to previous node. + * @param pNewNode: Pointer to new node to insert. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_InsertNode(SD_DMALinkedListTypeDef *pLinkedList, + SD_DMALinkNodeTypeDef *pPrevNode, SD_DMALinkNodeTypeDef *pNewNode) +{ + + (void)SDMMC_DMALinkedList_InsertNode(pLinkedList, pPrevNode, pNewNode); + + return (HAL_OK); + +} +/** + * @brief Remove Linked List node. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_RemoveNode(SD_DMALinkedListTypeDef *pLinkedList, SD_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_RemoveNode(pLinkedList, pNode) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Lock Linked List node. + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_LockNode(SD_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_LockNode(pNode) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Unlock Linked List node. + * @param pNode: Pointer to node to remove. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_UnlockNode(SD_DMALinkNodeTypeDef *pNode) +{ + + if (SDMMC_DMALinkedList_UnlockNode(pNode) != SDMMC_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Enable Circular mode for DMA Linked List. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_EnableCircularMode(SD_DMALinkedListTypeDef *pLinkedList) +{ + + (void)SDMMC_DMALinkedList_EnableCircularMode(pLinkedList); + + return HAL_OK; + +} +/** + * @brief Disable Circular mode for DMA Linked List. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_DisableCircularMode(SD_DMALinkedListTypeDef *pLinkedList) +{ + + (void)SDMMC_DMALinkedList_DisableCircularMode(pLinkedList); + + return HAL_OK; + +} + + +/** + * @brief Reads block(s) from a specified address in a card. The received Data will be stored in linked list buffers. + * linked list should be prepared before call this function . + * @param hsd: SD handle + * @param pLinkedList: pointer to first linked list node + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_ReadBlocks(SD_HandleTypeDef *hsd, SDMMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t add = BlockAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->Instance->IDMABASER = (uint32_t) pLinkedList->pHeadNode->IDMABASER; + hsd->Instance->IDMABSIZE = (uint32_t) pLinkedList->pHeadNode->IDMABSIZE; + + hsd->Instance->IDMABAR = (uint32_t) pLinkedList->pHeadNode; + hsd->Instance->IDMALAR = (uint32_t) SDMMC_IDMALAR_ABR | SDMMC_IDMALAR_ULS | SDMMC_IDMALAR_ULA | + sizeof(SDMMC_DMALinkNodeTypeDef) ; /* Initial configuration */ + + DmaBase0_reg = hsd->Instance->IDMABASER; + DmaBase1_reg = hsd->Instance->IDMABAR; + + if ((hsd->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hsd->ErrorCode = HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + /* Clear old Flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + hsd->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Read Blocks in DMA mode */ + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_IT_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + +} + +/** + * @brief Write block(s) to a specified address in a card. The transferred Data are stored linked list nodes buffers . + * linked list should be prepared before call this function . + * @param hsd: SD handle + * @param pLinkedList: pointer to first linked list node + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_DMALinkedList_WriteBlocks(SD_HandleTypeDef *hsd, SDMMC_DMALinkedListTypeDef *pLinkedList, + uint32_t BlockAdd, uint32_t NumberOfBlocks) + +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t add = BlockAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->Instance->IDMABASER = (uint32_t) pLinkedList->pHeadNode->IDMABASER; + hsd->Instance->IDMABSIZE = (uint32_t) pLinkedList->pHeadNode->IDMABSIZE; + + hsd->Instance->IDMABAR = (uint32_t) pLinkedList->pHeadNode; + hsd->Instance->IDMALAR = (uint32_t) SDMMC_IDMALAR_ABR | SDMMC_IDMALAR_ULS | SDMMC_IDMALAR_ULA | + sizeof(SDMMC_DMALinkNodeTypeDef) ; /* Initial configuration */ + + DmaBase0_reg = hsd->Instance->IDMABASER; + DmaBase1_reg = hsd->Instance->IDMABAR; + + if ((hsd->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hsd->ErrorCode = HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Write Blocks in DMA mode */ + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_IT_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED */ +#endif /* SDMMC1 || SDMMC2 */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sdram.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sdram.c new file mode 100644 index 000000000..217ad74c1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sdram.c @@ -0,0 +1,1429 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sdram.c + * @author MCD Application Team + * @brief SDRAM HAL module driver. + * This file provides a generic firmware to drive SDRAM memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SDRAM memories. It uses the FMC layer functions to interface + with SDRAM devices. + The following sequence should be followed to configure the FMC to interface + with SDRAM memories: + + (#) Declare a SDRAM_HandleTypeDef handle structure, for example: + SDRAM_HandleTypeDef hsdram + + (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SDRAM device + + (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example: + FMC_SDRAM_TimingTypeDef Timing; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit() + (##) Control register configuration using the FMC SDRAM interface function + FMC_SDRAM_Init() + (##) Timing register configuration using the FMC SDRAM interface function + FMC_SDRAM_Timing_Init() + (##) Program the SDRAM external device by applying its initialization sequence + according to the device plugged in your hardware. This step is mandatory + for accessing the SDRAM device. + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the SDRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access + (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/ + HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or + the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM + device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef + structure. + + (#) You can continuously monitor the SDRAM device HAL state by calling the function + HAL_SDRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SDRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SDRAM MspInit. + (+) MspDeInitCallback : SDRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_SDRAM_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : SDRAM MspInit. + (+) MspDeInitCallback : SDRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_SDRAM_Init and if the state is HAL_SDRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SDRAM_Init + and HAL_SDRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SDRAM_Init and HAL_SDRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SDRAM_RegisterCallback before calling HAL_SDRAM_DeInit + or HAL_SDRAM_Init function. + + When The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + +/** @defgroup SDRAM SDRAM + * @brief SDRAM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions + * @{ + */ +static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma); +static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma); +static void SDRAM_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions + * @{ + */ + +/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### SDRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the SDRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SDRAM device initialization sequence. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param Timing Pointer to SDRAM control timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing) +{ + /* Check the SDRAM handle parameter */ + if (hsdram == NULL) + { + return HAL_ERROR; + } + + if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsdram->Lock = HAL_UNLOCKED; +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + if (hsdram->MspInitCallback == NULL) + { + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + } + hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; + hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; + hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsdram->MspInitCallback(hsdram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SDRAM_MspInit(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + } + + /* Initialize the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Initialize SDRAM control Interface */ + (void)FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init)); + + /* Initialize SDRAM timing Interface */ + (void)FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank); + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Perform the SDRAM device initialization sequence. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram) +{ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + if (hsdram->MspDeInitCallback == NULL) + { + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsdram->MspDeInitCallback(hsdram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SDRAM_MspDeInit(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + + /* Configure the SDRAM registers with their reset values */ + (void)FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank); + + /* Reset the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsdram); + + return HAL_OK; +} + +/** + * @brief SDRAM MSP Init. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SDRAM MSP DeInit. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function handles SDRAM refresh error interrupt request. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram) +{ + /* Check SDRAM interrupt Rising edge flag */ + if (__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT)) + { + /* SDRAM refresh error interrupt callback */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->RefreshErrorCallback(hsdram); +#else + HAL_SDRAM_RefreshErrorCallback(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + + /* Clear SDRAM refresh error interrupt pending bit */ + __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR); + } +} + +/** + * @brief SDRAM Refresh error callback. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hdma DMA handle + * @retval None + */ +__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SDRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SDRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; + uint8_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from source */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *(__IO uint8_t *)pSdramAddress; + pdestbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 8-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; + uint8_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *(__IO uint8_t *)pSdramAddress = *psrcbuff; + psrcbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 16-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = pAddress; + uint16_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size >= 2U ; size -= 2U) + { + *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); + pdestbuff++; + *pdestbuff = (uint16_t)(((*pSdramAddress) & 0xFFFF0000U) >> 16U); + pdestbuff++; + pSdramAddress++; + } + + /* Read last 16-bits if size is not 32-bits multiple */ + if ((BufferSize % 2U) != 0U) + { + *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 16-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psdramaddress = pAddress; + uint16_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size >= 2U ; size -= 2U) + { + *psdramaddress = (uint32_t)(*psrcbuff); + psrcbuff++; + *psdramaddress |= ((uint32_t)(*psrcbuff) << 16U); + psrcbuff++; + psdramaddress++; + } + + /* Write last 16-bits if size is not 32-bits multiple */ + if ((BufferSize % 2U) != 0U) + { + *psdramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psdramaddress) & 0xFFFF0000U); + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 32-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = (uint32_t *)pAddress; + uint32_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from source */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *(__IO uint32_t *)pSdramAddress; + pdestbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 32-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = pAddress; + uint32_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *pSdramAddress = *psrcbuff; + psrcbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SDRAM memory using DMA transfer. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + HAL_SDRAM_StateTypeDef state = hsdram->State; + uint32_t size; + uint32_t data_width; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + status = HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + if (state == HAL_SDRAM_STATE_READY) + { + hsdram->hdma->XferCpltCallback = SDRAM_DMACplt; + } + else + { + hsdram->hdma->XferCpltCallback = SDRAM_DMACpltProt; + } + hsdram->hdma->XferErrorCallback = SDRAM_DMAError; + + if ((hsdram->hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsdram->hdma->LinkedListQueue != 0U) && (hsdram->hdma->LinkedListQueue->Head != 0U)) + { + /* Check destination data width and set the size to be transferred */ + data_width = hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + /* Set Source , destination , buffer size */ + /* Set DMA data size */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = size; + /* Set DMA source address */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pAddress; + /* Set DMA destination address */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pDstBuffer; + + /* Enable the DMA Stream */ + status = HAL_DMAEx_List_Start_IT(hsdram->hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + + status = HAL_ERROR; + } + } + else + { + /* Check destination data width and set the size to be transferred */ + data_width = hsdram->hdma->Init.DestDataWidth; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, size); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a Words data buffer to SDRAM memory using DMA transfer. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + uint32_t size; + uint32_t data_width; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + status = HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsdram->hdma->XferCpltCallback = SDRAM_DMACplt; + hsdram->hdma->XferErrorCallback = SDRAM_DMAError; + + if ((hsdram->hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsdram->hdma->LinkedListQueue != 0U) && (hsdram->hdma->LinkedListQueue->Head != 0U)) + { + /* Check destination data width and set the size to be transferred */ + data_width = hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + /* Set Source , destination , buffer size */ + /* Set DMA data size */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = size; + /* Set DMA source address */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pSrcBuffer; + /* Set DMA destination address */ + hsdram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pAddress; + + /* Enable the DMA Stream */ + status = HAL_DMAEx_List_Start_IT(hsdram->hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + + status = HAL_ERROR; + } + } + else + { + /* Check destination data width and set the size to be transferred */ + data_width = hsdram->hdma->Init.DestDataWidth; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, size); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SDRAM Callback + * To be used to override the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID + * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID + * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = pCallback; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = pCallback; + break; + case HAL_SDRAM_REFRESH_ERR_CB_ID : + hsdram->RefreshErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = pCallback; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SDRAM Callback + * SDRAM Callback is redirected to the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID + * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID + * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + break; + case HAL_SDRAM_REFRESH_ERR_CB_ID : + hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; + break; + case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : + hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; + break; + case HAL_SDRAM_DMA_XFER_ERR_CB_ID : + hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User SDRAM Callback for DMA transfers + * To be used to override the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsdram); + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : + hsdram->DmaXferCpltCallback = pCallback; + break; + case HAL_SDRAM_DMA_XFER_ERR_CB_ID : + hsdram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsdram); + return status; +} +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group3 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### SDRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SDRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SDRAM write protection. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Enable write protection */ + (void)FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically SDRAM write protection. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram) +{ + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_SDRAM_STATE_WRITE_PROTECTED) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Disable write protection */ + (void)FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Sends Command to the SDRAM bank. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param Command SDRAM command structure + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, + uint32_t Timeout) +{ + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_PRECHARGED)) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Send SDRAM command */ + (void)FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout); + + /* Update the SDRAM controller state state */ + if (Command->CommandMode == FMC_SDRAM_CMD_PALL) + { + hsdram->State = HAL_SDRAM_STATE_PRECHARGED; + } + else + { + hsdram->State = HAL_SDRAM_STATE_READY; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Programs the SDRAM Memory Refresh rate. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param RefreshRate The SDRAM refresh rate value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Program the refresh rate */ + (void)FMC_SDRAM_ProgramRefreshRate(hsdram->Instance, RefreshRate); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param AutoRefreshNumber The SDRAM auto Refresh number + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Set the Auto-Refresh number */ + (void)FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance, AutoRefreshNumber); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Returns the SDRAM memory current mode. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval The SDRAM memory mode. + */ +uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram) +{ + /* Return the SDRAM memory current mode */ + return (FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank)); +} + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group4 State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SDRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SDRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SDRAM state. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL state + */ +HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(const SDRAM_HandleTypeDef *hsdram) +{ + return hsdram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions + * @{ + */ +/** + * @brief DMA SDRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SDRAM_DMACplt(DMA_HandleTypeDef *hdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferCpltCallback(hdma); +#else + HAL_SDRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SDRAM_DMACpltProt(DMA_HandleTypeDef *hdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferCpltCallback(hdma); +#else + HAL_SDRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SDRAM error callback. + * @param hdma : DMA handle + * @retval None + */ +static void SDRAM_DMAError(DMA_HandleTypeDef *hdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_ERROR; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferErrorCallback(hdma); +#else + HAL_SDRAM_DMA_XferErrorCallback(hdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard.c new file mode 100644 index 000000000..00f8d575f --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard.c @@ -0,0 +1,3286 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smartcard.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). + (#) Associate a USART to the SMARTCARD handle hsmartcard. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, + the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission + error enabling or disabling in the hsmartcard handle Init structure. + + (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) + in the hsmartcard handle AdvancedInit structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMARTCARD_MspInit() API. + [..] + (@) The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + [..] + [..] Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + + [..] + By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_SMARTCARD_Init() + and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit() + or HAL_SMARTCARD_Init() function. + + [..] + When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants + * @{ + */ +#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ + +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ + USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \ + USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions + * @{ + */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +#if defined(HAL_DMA_MODULE_ENABLED) +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + associated to the SmartCard. + (+) These parameters can be configured: + (++) Baud Rate + (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity + (++) Receiver/transmitter modes + (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) + (++) Prescaler value + (++) Guard bit time + (++) NACK enabling or disabling on transmission error + + (+) The following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) Time out enabling (and if activated, timeout value) + (++) Block length + (++) Auto-retry counter + [..] + The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + The USART frame format is given in the following table: + + Table 1. USART frame format. + +---------------------------------------------------------------+ + | M1M0 bits | PCE bit | USART frame | + |-----------------------|---------------------------------------| + | 01 | 1 | | SB | 8 bit data | PB | STB | | + +---------------------------------------------------------------+ + + + * @{ + */ + +/** + * @brief Initialize the SMARTCARD mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmartcard->Lock = HAL_UNLOCKED; + +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + SMARTCARD_InitCallbacksToDefault(hsmartcard); + + if (hsmartcard->MspInitCallback == NULL) + { + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + } + + /* Init the low level hardware */ + hsmartcard->MspInitCallback(hsmartcard); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_SMARTCARD_MspInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + } + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral to set smartcard mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN in the USART_CR2 register, + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); + + /* set the USART in SMARTCARD mode */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); + + /* Set the SMARTCARD Communication parameters */ + if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Set the SMARTCARD transmission completion indication */ + SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); + + if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) + { + SMARTCARD_AdvFeatureConfig(hsmartcard); + } + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ + return (SMARTCARD_CheckIdleState(hsmartcard)); +} + +/** + * @brief DeInitialize the SMARTCARD peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + WRITE_REG(hsmartcard->Instance->CR1, 0x0U); + WRITE_REG(hsmartcard->Instance->CR2, 0x0U); + WRITE_REG(hsmartcard->Instance->CR3, 0x0U); + WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); + WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); + + /* DeInit the low level hardware */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + if (hsmartcard->MspDeInitCallback == NULL) + { + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + } + /* DeInit the low level hardware */ + hsmartcard->MspDeInitCallback(hsmartcard); +#else + HAL_SMARTCARD_MspDeInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; + hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Initialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMARTCARD Callback + * To be used to override the weak predefined callback + * @note The HAL_SMARTCARD_RegisterCallback() may be called before HAL_SMARTCARD_Init() + * in HAL_SMARTCARD_STATE_RESET to register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID + * and HAL_SMARTCARD_MSPDEINIT_CB_ID + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + switch (CallbackID) + { + + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = pCallback; + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an SMARTCARD callback + * SMARTCARD callback is redirected to the weak predefined callback + * @note The HAL_SMARTCARD_UnRegisterCallback() may be called before HAL_SMARTCARD_Init() + * in HAL_SMARTCARD_STATE_RESET to un-register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID + * and HAL_SMARTCARD_MSPDEINIT_CB_ID + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback*/ + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. The USART should be configured as: + (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + [..] + (#) There are two modes of transfer: + (##) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (##) Non-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (#) Blocking mode APIs are : + (##) HAL_SMARTCARD_Transmit() + (##) HAL_SMARTCARD_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (##) HAL_SMARTCARD_Transmit_IT() + (##) HAL_SMARTCARD_Receive_IT() + (##) HAL_SMARTCARD_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (##) HAL_SMARTCARD_Transmit_DMA() + (##) HAL_SMARTCARD_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (##) HAL_SMARTCARD_TxCpltCallback() + (##) HAL_SMARTCARD_RxCpltCallback() + (##) HAL_SMARTCARD_ErrorCallback() + + [..] + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (##) HAL_SMARTCARD_Abort() + (##) HAL_SMARTCARD_AbortTransmit() + (##) HAL_SMARTCARD_AbortReceive() + (##) HAL_SMARTCARD_Abort_IT() + (##) HAL_SMARTCARD_AbortTransmit_IT() + (##) HAL_SMARTCARD_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), + a set of Abort Complete Callbacks are provided: + (##) HAL_SMARTCARD_AbortCpltCallback() + (##) HAL_SMARTCARD_AbortTransmitCpltCallback() + (##) HAL_SMARTCARD_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. + If user wants to abort it, Abort services should be called by user. + (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt + mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + const uint8_t *ptmpdata = pData; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + while (hsmartcard->TxXferCount > 0U) + { + hsmartcard->TxXferCount--; + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); + ptmpdata++; + } + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, + tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Check the remain data to be received */ + while (hsmartcard->RxXferCount > 0U) + { + hsmartcard->RxXferCount--; + + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); + ptmpdata++; + } + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_TDR register is empty, i.e one interrupt per data to transmit. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * TXFIFO threshold reached. In that case the interrupt rate depends on + * TXFIFO threshold configuration. + * @note This function sets the hsmartcard->TxIsr function pointer according to + * the FIFO mode (data transmission processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + hsmartcard->TxISR = NULL; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Configure Tx interrupt processing */ + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_RDR register can be read, i.e one interrupt per data to receive. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * RXFIFO threshold reached. In that case the interrupt rate depends on + * RXFIFO threshold configuration. + * @note This function sets the hsmartcard->RxIsr function pointer according to + * the FIFO mode (data reception processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Configure Rx interrupt processing */ + if ((hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) && (Size >= hsmartcard->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the SMARTCARD error callback */ + hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check linked list mode */ + if ((hsmartcard->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsmartcard->hdmatx->LinkedListQueue != NULL) && (hsmartcard->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + hsmartcard->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = Size; + + /* Set DMA source address */ + hsmartcard->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)hsmartcard->pTxBuffPtr; + + /* Set DMA destination address */ + hsmartcard->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&hsmartcard->Instance->TDR; + + /* Enable the SMARTCARD transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(hsmartcard->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the SMARTCARD transmit DMA channel */ + status = HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, + (uint32_t)&hsmartcard->Instance->TDR, Size); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the UART Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), + * the received data contain the parity bit (MSB position). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the SMARTCARD DMA error callback */ + hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check linked list mode */ + if ((hsmartcard->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsmartcard->hdmarx->LinkedListQueue != NULL) && (hsmartcard->hdmarx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + hsmartcard->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = Size; + + /* Set DMA source address */ + hsmartcard->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&hsmartcard->Instance->RDR; + + /* Set DMA destination address */ + hsmartcard->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)hsmartcard->pRxBuffPtr; + + /* Enable the SMARTCARD receive DMA channel */ + status = HAL_DMAEx_List_Start_IT(hsmartcard->hdmarx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the DMA channel */ + status = HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, + (uint32_t)hsmartcard->pRxBuffPtr, Size); + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t abortcplt = 1U; + + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, + DMA Abort complete callbacks should be initialised before any call + to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hsmartcard->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; + } + else + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hsmartcard->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; + } + else + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* SMARTCARD Tx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* SMARTCARD Rx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD interrupt requests. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); + uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); + uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U)))) + { + /* SMARTCARD parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + /* SMARTCARD frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + /* SMARTCARD noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U) + || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; + } + + /* Call SMARTCARD Error Call back function if need be --------------------------*/ + if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = hsmartcard->ErrorCode; + if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + SMARTCARD_EndRxTransfer(hsmartcard); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + /* other error type to be considered as blocking : + - Frame error in Transmission + */ + else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ + SMARTCARD_EndTxTransfer(hsmartcard); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ + if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) + { + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + __HAL_UNLOCK(hsmartcard); +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information + to be available during HAL_SMARTCARD_RxCpltCallback() processing */ + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); + return; + } + + /* SMARTCARD in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (hsmartcard->TxISR != NULL) + { + hsmartcard->TxISR(hsmartcard); + } + return; + } + + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + SMARTCARD_EndTransmit_IT(hsmartcard); + return; + } + } + + /* SMARTCARD TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + hsmartcard->TxFifoEmptyCallback(hsmartcard); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_SMARTCARDEx_TxFifoEmptyCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } + + /* SMARTCARD RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + hsmartcard->RxFifoFullCallback(hsmartcard); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_SMARTCARDEx_RxFifoFullCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Receive Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + handle and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMARTCARD handle state. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Return SMARTCARD handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hsmartcard->gState; + temp2 = (uint32_t)hsmartcard->RxState; + + return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the SMARTCARD handle error code. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle Error Code + */ +uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsmartcard) +{ + return hsmartcard->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hsmartcard SMARTCARD handle. + * @retval none + */ +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Init the SMARTCARD Callback settings */ + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak + RxFifoFullCallback */ + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak + TxFifoEmptyCallback */ + +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief Configure the SMARTCARD associated USART peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpreg; + SMARTCARD_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); + assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); + assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); + assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); + assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); + assert_param(IS_SMARTCARD_CLOCKPRESCALER(hsmartcard->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). + * Oversampling is forced to 16 (OVER8 = 0). + * Configure the Parity and Mode: + * set PS bit according to hsmartcard->Init.Parity value + * set TE and RE bits according to hsmartcard->Init.Mode value */ + tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) | + ((uint32_t)hsmartcard->Init.WordLength)); + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = hsmartcard->Init.StopBits; + /* Synchronous mode is activated by default */ + tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; + tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - one-bit sampling method versus three samples' majority rule + * according to hsmartcard->Init.OneBitSampling + * - NACK transmission in case of parity error according + * to hsmartcard->Init.NACKEnable + * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ + + tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; + tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*--------------------- SMARTCARD clock PRESC Configuration ----------------*/ + /* Configure + * - SMARTCARD Clock Prescaler: set PRESCALER according to hsmartcard->Init.ClockPrescaler value */ + MODIFY_REG(hsmartcard->Instance->PRESC, USART_PRESC_PRESCALER, hsmartcard->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); + + /*-------------------------- USART RTOR Configuration ----------------------*/ + tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); + if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) + { + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; + } + WRITE_REG(hsmartcard->Instance->RTOR, tmpreg); + + /*-------------------------- USART BRR Configuration -----------------------*/ + SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case SMARTCARD_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + tmpreg = (uint32_t)((((HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)) / + SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + } + else + { + tmpreg = (uint32_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + } + break; + case SMARTCARD_CLOCKSOURCE_CSI: + tmpreg = (uint32_t)(((CSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_LSE: + tmpreg = (uint32_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hsmartcard->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + return ret; +} + + +/** + * @brief Configure the SMARTCARD associated USART peripheral advanced features. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); + } + +} + +/** + * @brief Check the SMARTCARD Idle State. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tickstart; + + /* Initialize the SMARTCARD ErrorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the SMARTCARD states */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag Specifies the SMARTCARD flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + /* Stop SMARTCARD DMA Tx request if ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->TxXferCount = 0U; + SMARTCARD_EndTxTransfer(hsmartcard); + } + } + + /* Stop SMARTCARD DMA Rx request if ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->RxXferCount = 0U; + SMARTCARD_EndRxTransfer(hsmartcard); + } + } + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + hsmartcard->TxXferCount = 0U; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmarx != NULL) + { + if (hsmartcard->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmatx != NULL) + { + if (hsmartcard->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + } +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + for (nb_tx_data = hsmartcard->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else if (READ_BIT(hsmartcard->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Tx process is ended, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Clear TxISR function pointer */ + hsmartcard->TxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hsmartcard->TxCpltCallback(hsmartcard); +#else + /* Call legacy weak Tx complete callback */ + HAL_SMARTCARD_TxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_rx_data; + uint16_t rxdatacount; + + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + for (nb_rx_data = hsmartcard->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = hsmartcard->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < hsmartcard->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard_ex.c new file mode 100644 index 000000000..2cdc8b016 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smartcard_ex.c @@ -0,0 +1,495 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smartcard_ex.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides extended firmware functions to manage the following + * functionalities of the SmartCard. + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================= + ##### SMARTCARD peripheral extended features ##### + ============================================================================= + [..] + The Extended SMARTCARD HAL driver can be used as follows: + + (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), + then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, + auto-retry counter,...) in the hsmartcard AdvancedInit structure. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When SMARTCARD operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARDEx SMARTCARDEx + * @brief SMARTCARD Extended HAL module driver + * @{ + */ +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Constants SMARTCARD Extended Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 16U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 16U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions + * @{ + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the SMARTCARD. + (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly + (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature + (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature + +@endverbatim + * @{ + */ + +/** @brief Update on the fly the SMARTCARD block length in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param BlockLength SMARTCARD block length (8-bit long at most) + * @retval None + */ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) +{ + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos)); +} + +/** @brief Update on the fly the receiver timeout value in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) +{ + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); +} + +/** @brief Enable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** @brief Disable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (++) HAL_SMARTCARDEx_RxFifoFullCallback() + (++) HAL_SMARTCARDEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief SMARTCARD RX Fifo full callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD TX Fifo empty callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group3 Extended Peripheral FIFO Control functions + * @brief SMARTCARD control functions + * +@verbatim + =============================================================================== + ##### Peripheral FIFO Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SMARTCARD + FIFO feature. + (+) HAL_SMARTCARDEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_SMARTCARDEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_SMARTCARDEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_SMARTCARDEx_SetRxFifoThreshold() API sets the RX FIFO threshold +@endverbatim + * @{ + */ + +/** + * @brief Enable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_ENABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_DISABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update TX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update RX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param hsmartcard SMARTCARD handle. + * @retval None + */ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE) + { + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / \ + (uint16_t)denominator[tx_fifo_threshold]; + hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / \ + (uint16_t)denominator[rx_fifo_threshold]; + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus.c new file mode 100644 index 000000000..30c94955e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus.c @@ -0,0 +1,2776 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smbus.c + * @author MCD Application Team + * @brief SMBUS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the System Management Bus (SMBus) peripheral, + * based on I2C principles of operation : + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMBUS HAL driver can be used as follows: + + (#) Declare a SMBUS_HandleTypeDef handle structure, for example: + SMBUS_HandleTypeDef hsmbus; + + (#)Initialize the SMBUS low level resources by implementing the HAL_SMBUS_MspInit() API: + (##) Enable the SMBUSx interface clock + (##) SMBUS pins configuration + (+++) Enable the clock for the SMBUS GPIOs + (+++) Configure SMBUS pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SMBUSx interrupt priority + (+++) Enable the NVIC SMBUS IRQ Channel + + (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Addressing mode, + Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode, + Peripheral mode and Packet Error Check mode in the hsmbus Init structure. + + (#) Initialize the SMBUS registers by calling the HAL_SMBUS_Init() API: + (++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMBUS_MspInit(&hsmbus) API. + + (#) To check if target device is ready for communication, use the function HAL_SMBUS_IsDeviceReady() + + (#) For SMBUS IO operations, only one mode of operations is available within this driver + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterTxCpltCallback() + (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterRxCpltCallback() + (+) Abort a master/host SMBUS process communication with Interrupt using HAL_SMBUS_Master_Abort_IT() + (++) The associated previous transfer callback is called at the end of abort process + (++) mean HAL_SMBUS_MasterTxCpltCallback() in case of previous state was master transmit + (++) mean HAL_SMBUS_MasterRxCpltCallback() in case of previous state was master receive + (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode + using HAL_SMBUS_EnableListen_IT() HAL_SMBUS_DisableListen_IT() + (++) When address slave/device SMBUS match, HAL_SMBUS_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction + request by master/host (Write/Read). + (++) At Listen mode end HAL_SMBUS_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ListenCpltCallback() + (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveTxCpltCallback() + (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveRxCpltCallback() + (+) Enable/Disable the SMBUS alert mode using + HAL_SMBUS_EnableAlert_IT() or HAL_SMBUS_DisableAlert_IT() + (++) When SMBUS Alert is generated HAL_SMBUS_ErrorCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Alert Error Code using function HAL_SMBUS_GetError() + (+) Get HAL state machine or error values using HAL_SMBUS_GetState() or HAL_SMBUS_GetError() + (+) In case of transfer Error, HAL_SMBUS_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Error Code using function HAL_SMBUS_GetError() + + *** SMBUS HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SMBUS HAL driver. + + (+) __HAL_SMBUS_ENABLE: Enable the SMBUS peripheral + (+) __HAL_SMBUS_DISABLE: Disable the SMBUS peripheral + (+) __HAL_SMBUS_GET_FLAG: Check whether the specified SMBUS flag is set or not + (+) __HAL_SMBUS_CLEAR_FLAG: Clear the specified SMBUS pending flag + (+) __HAL_SMBUS_ENABLE_IT: Enable the specified SMBUS interrupt + (+) __HAL_SMBUS_DISABLE_IT: Disable the specified SMBUS interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SMBUS_RegisterCallback() or HAL_SMBUS_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_SMBUS_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_SMBUS_RegisterAddrCallback. + [..] + Use function HAL_SMBUS_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_SMBUS_UnRegisterAddrCallback. + [..] + By default, after the HAL_SMBUS_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SMBUS_MasterTxCpltCallback(), HAL_SMBUS_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SMBUS_RegisterCallback() before calling HAL_SMBUS_DeInit() + or HAL_SMBUS_Init() function. + [..] + When the compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the SMBUS HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SMBUS SMBUS + * @brief SMBUS HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Define SMBUS Private Constants + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFUL) /*!< SMBUS TIMING clear register Mask */ +#define HAL_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define HAL_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TC (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define MAX_NBYTE_SIZE 255U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout); + +/* Private functions for SMBUS transfer IRQ handler */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); + +/* Private function to flush TXDR register */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus); + +/* Private function to handle start, restart or stop a transfer */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request); + +/* Private function to Convert Specific options */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the SMBUSx peripheral: + + (+) User must Implement HAL_SMBUS_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, IT and NVIC ). + + (+) Call the function HAL_SMBUS_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Bus Timeout + (++) Analog Filer mode + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + (++) Packet Error Check mode + (++) Peripheral mode + + + (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration + of the selected SMBUSx peripheral. + + (+) Enable/Disable Analog/Digital filters with HAL_SMBUS_ConfigAnalogFilter() and + HAL_SMBUS_ConfigDigitalFilter(). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SMBUS according to the specified parameters + * in the SMBUS_InitTypeDef and initialize the associated handle. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter)); + assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1)); + assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode)); + assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode)); + assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2)); + assert_param(IS_SMBUS_OWN_ADDRESS2_MASK(hsmbus->Init.OwnAddress2Masks)); + assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode)); + assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode)); + assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode)); + assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode)); + + if (hsmbus->State == HAL_SMBUS_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmbus->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + + if (hsmbus->MspInitCallback == NULL) + { + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hsmbus->MspInitCallback(hsmbus); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /*---------------------------- SMBUSx TIMINGR Configuration ------------------------*/ + /* Configure SMBUSx: Frequency range */ + hsmbus->Instance->TIMINGR = hsmbus->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- SMBUSx TIMEOUTR Configuration ------------------------*/ + /* Configure SMBUSx: Bus Timeout */ + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TIMOUTEN; + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TEXTEN; + hsmbus->Instance->TIMEOUTR = hsmbus->Init.SMBusTimeout; + + /*---------------------------- SMBUSx OAR1 Configuration -----------------------*/ + /* Configure SMBUSx: Own Address1 and ack own address1 mode */ + hsmbus->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + if (hsmbus->Init.OwnAddress1 != 0UL) + { + if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT) + { + hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | hsmbus->Init.OwnAddress1); + } + } + + /*---------------------------- SMBUSx CR2 Configuration ------------------------*/ + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */ + /* AUTOEND and NACK bit will be manage during Transfer process */ + hsmbus->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- SMBUSx OAR2 Configuration -----------------------*/ + /* Configure SMBUSx: Dual mode and Own Address2 */ + hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | \ + (hsmbus->Init.OwnAddress2Masks << 8U)); + + /*---------------------------- SMBUSx CR1 Configuration ------------------------*/ + /* Configure SMBUSx: Generalcall and NoStretch mode */ + hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | \ + hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | \ + hsmbus->Init.AnalogFilter); + + /* Enable Slave Byte Control only in case of Packet Error Check is enabled + and SMBUS Peripheral is set in Slave mode */ + if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE) && \ + ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))) + { + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + } + + /* Enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the SMBUS peripheral. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the SMBUS Peripheral Clock */ + __HAL_SMBUS_DISABLE(hsmbus); + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + if (hsmbus->MspDeInitCallback == NULL) + { + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hsmbus->MspDeInitCallback(hsmbus); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspDeInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_RESET; + hsmbus->State = HAL_SMBUS_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} + +/** + * @brief Initialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Configure Analog noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref SMBUS_ANALOGFILTER_ENABLE + * @arg @ref SMBUS_ANALOGFILTER_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(AnalogFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Reset ANOFF bit */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hsmbus->Instance->CR1 |= AnalogFilter; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure Digital noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_DIGITAL_FILTER(DigitalFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Get the old register value */ + tmpreg = hsmbus->Instance->CR1; + + /* Reset I2C DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << I2C_CR1_DNF_Pos; + + /* Store the new register value */ + hsmbus->Instance->CR1 = tmpreg; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMBUS Callback + * To be used instead of the weak predefined callback + * @note The HAL_SMBUS_RegisterCallback() may be called before HAL_SMBUS_Init() in + * HAL_SMBUS_STATE_RESET to register callbacks for HAL_SMBUS_MSPINIT_CB_ID and + * HAL_SMBUS_MSPDEINIT_CB_ID. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = pCallback; + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = pCallback; + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an SMBUS Callback + * SMBUS callback is redirected to the weak predefined callback + * @note The HAL_SMBUS_UnRegisterCallback() may be called before HAL_SMBUS_Init() in + * HAL_SMBUS_STATE_RESET to un-register callbacks for HAL_SMBUS_MSPINIT_CB_ID and + * HAL_SMBUS_MSPDEINIT_CB_ID + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match SMBUS Callback + * To be used instead of the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match SMBUS Callback + * Info Ready SMBUS Callback is redirected to the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMBUS data + transfers. + + (#) Blocking mode function to check if device is ready for usage is : + (++) HAL_SMBUS_IsDeviceReady() + + (#) There is only one mode of transfer: + (++) Non-Blocking mode : The communication is performed using Interrupts. + These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SMBUS IRQ when using Interrupt mode. + + (#) Non-Blocking mode functions with Interrupt are : + (++) HAL_SMBUS_Master_Transmit_IT() + (++) HAL_SMBUS_Master_Receive_IT() + (++) HAL_SMBUS_Slave_Transmit_IT() + (++) HAL_SMBUS_Slave_Receive_IT() + (++) HAL_SMBUS_EnableListen_IT() or alias HAL_SMBUS_EnableListen_IT() + (++) HAL_SMBUS_DisableListen_IT() + (++) HAL_SMBUS_EnableAlert_IT() + (++) HAL_SMBUS_DisableAlert_IT() + + (#) A set of Transfer Complete Callbacks are provided in non-Blocking mode: + (++) HAL_SMBUS_MasterTxCpltCallback() + (++) HAL_SMBUS_MasterRxCpltCallback() + (++) HAL_SMBUS_SlaveTxCpltCallback() + (++) HAL_SMBUS_SlaveRxCpltCallback() + (++) HAL_SMBUS_AddrCallback() + (++) HAL_SMBUS_ListenCpltCallback() + (++) HAL_SMBUS_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_WRITE); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + hsmbus->XferOptions, + SMBUS_GENERATE_START_WRITE); + } + + /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + if (hsmbus->XferSize > 0U) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else + { + return HAL_ERROR; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_READ); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, Misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + hsmbus->XferOptions, + SMBUS_GENERATE_START_READ); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master/host SMBUS process communication with Interrupt. + * @note This abort can be called only if state is ready + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) +{ + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + /* Keep the same state as previous */ + /* to perform as well the call of the corresponding end of transfer callback */ + if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + } + else if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set NBYTES to 1 to generate a dummy read on SMBUS peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, 1, SMBUS_AUTOEND_MODE, SMBUS_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + } + else + { + /* Nothing to do */ + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_TX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_TX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + } + else + { + /* Set NBYTE to transmit */ + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_RX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_RX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferSize = Size; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Set NBYTE to receive */ + /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */ + /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */ + /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */ + /* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */ + if (((SMBUS_GET_PEC_MODE(hsmbus) != 0UL) && (hsmbus->XferSize == 2U)) || (hsmbus->XferSize == 1U)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + else + { + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions | SMBUS_RELOAD_MODE, SMBUS_NO_STARTSTOP); + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + + /* Enable the Address Match interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) + { + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Disable the Address Match interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 |= I2C_CR1_ALERTEN; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + + /* Enable Alert Interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} +/** + * @brief Disable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 &= ~I2C_CR1_ALERTEN; + + /* Disable Alert Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} + +/** + * @brief Check if target device is ready for communication. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t SMBUS_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + do + { + /* Generate Start */ + hsmbus->Instance->CR2 = SMBUS_GENERATE_START(hsmbus->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + return HAL_ERROR; + } + } + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (SMBUS_Trials == Trials) + { + /* Generate Stop */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Increment Trials */ + SMBUS_Trials++; + } while (SMBUS_Trials < Trials); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief Handle SMBUS event interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + /* Use a local variable to store the current ISR flags */ + /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */ + uint32_t tmpisrvalue = READ_REG(hsmbus->Instance->ISR); + uint32_t tmpcr1value = READ_REG(hsmbus->Instance->CR1); + + /* SMBUS in mode Transmitter ---------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_TX) == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Receiver ----------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_RX) == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Listener Only --------------------------------------------------*/ + if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + } +} + +/** + * @brief Handle SMBUS error interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + SMBUS_ITErrorHandler(hsmbus); +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterRxCpltCallback() could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveRxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param TransferDirection Master request Transfer Direction (Write/Read) + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief SMBUS error callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ErrorCallback() could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMBUS handle state. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL state + */ +uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus) +{ + /* Return SMBUS handle state */ + return hsmbus->State; +} + +/** + * @brief Return the SMBUS error code. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval SMBUS Error Code + */ +uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus) +{ + return hsmbus->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @brief Data transfers Private functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint16_t DevAddress; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + /* Check and treat errors if errors occurs during STOP process */ + SMBUS_ITErrorHandler(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */ + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Re-enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + /* Store Last receive data if any */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + DevAddress = (uint16_t)(hsmbus->Instance->CR2 & I2C_CR2_SADD); + + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + else if ((hsmbus->XferCount == 0U) && (hsmbus->XferSize == 0U)) + { + /* Call TxCpltCallback() if no stop mode is set */ + if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TC) != RESET) + { + if (hsmbus->XferCount == 0U) + { + /* Specific use case for Quick command */ + if (hsmbus->pBuffPtr == NULL) + { + /* Generate a Stop command */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + } + /* Call TxCpltCallback() if no stop mode is set */ + else if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when SMBUS_AUTOEND_MODE enable */ + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint8_t TransferDirection; + uint16_t SlaveAddrCode; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Check that SMBUS transfer finished */ + /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hsmbus->XferCount == 0U) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + } + else + { + /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/ + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set HAL State to "Idle" State, mean to LISTEN state */ + /* So reset Slave Busy state */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Disable RX/TX Interrupts, keep only ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_ADDR) != RESET) + { + TransferDirection = (uint8_t)(SMBUS_GET_DIR(hsmbus)); + SlaveAddrCode = (uint16_t)(SMBUS_GET_ADDR_MATCH(hsmbus)); + + /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/ + /* Other ADDRInterrupt will be treat in next Listen usecase */ + __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ADDRI); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call Slave Addr callback */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#else + HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET)) + { + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferSize--; + hsmbus->XferCount--; + + if (hsmbus->XferCount == 1U) + { + /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */ + /* or only the last Byte of Transfer */ + /* So reset the RELOAD bit mode */ + hsmbus->XferOptions &= ~SMBUS_RELOAD_MODE; + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + else if (hsmbus->XferCount == 0U) + { + /* Last Byte is received, disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_SMBUS_STATE_LISTEN */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveRxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Set Reload for next Bytes */ + SMBUS_TransferConfig(hsmbus, 0, 1, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + + /* Ack last Byte Read */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + } + } + else if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hsmbus->XferCount > 0U) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferCount--; + hsmbus->XferSize--; + } + + if (hsmbus->XferCount == 0U) + { + /* Last Byte is Transmitted */ + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_SMBUS_STATE_LISTEN */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveTxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + + /* Check if STOPF is set */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + /* Store Last receive data if any */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable RX and TX Interrupts */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Disable ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + /* Disable Address Acknowledge */ + hsmbus->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear ADDR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + hsmbus->XferOptions = 0; + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ListenCpltCallback(hsmbus); +#else + HAL_SMBUS_ListenCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Manage the enabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + + if ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT) + { + /* Enable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Enable ADDR, STOP interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI; + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI; + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of SMBUS interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_SMBUS_ENABLE_IT(hsmbus, tmpisr); +} +/** + * @brief Manage the disabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + uint32_t tmpstate = hsmbus->State; + + if ((tmpstate == HAL_SMBUS_STATE_READY) && ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Disable TC, STOP, NACK and TXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_TXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Disable TC, STOP, NACK and RXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_RXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Disable ADDR, STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI; + + if (SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_SMBUS_DISABLE_IT(hsmbus, tmpisr); +} + +/** + * @brief SMBUS interrupts error handler. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus) +{ + uint32_t itflags = READ_REG(hsmbus->Instance->ISR); + uint32_t itsources = READ_REG(hsmbus->Instance->CR1); + uint32_t tmpstate; + uint32_t tmperror; + + /* SMBUS Bus error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR); + } + + /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR); + } + + /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO); + } + + /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/ + if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT; + + /* Clear TIMEOUT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT); + } + + /* SMBUS Alert error interrupt occurred -----------------------------------------------*/ + if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + } + + /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/ + if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR; + + /* Clear PEC error flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR); + } + + if (hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE) + { + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + } + + /* Store current volatile hsmbus->ErrorCode, misra rule */ + tmperror = hsmbus->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror != HAL_SMBUS_ERROR_NONE) && (tmperror != HAL_SMBUS_ERROR_ACKF)) + { + /* Do not Reset the HAL state in case of ALERT error */ + if ((tmperror & HAL_SMBUS_ERROR_ALERT) != HAL_SMBUS_ERROR_ALERT) + { + /* Store current volatile hsmbus->State, misra rule */ + tmpstate = hsmbus->State; + + if (((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + || ((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)) + { + /* Reset only HAL_SMBUS_STATE_SLAVE_BUSY_XX */ + /* keep HAL_SMBUS_STATE_LISTEN if set */ + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + } + } + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle SMBUS Communication Timeout. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param Flag Specifies the SMBUS flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + while ((FlagStatus)(__HAL_SMBUS_GET_FLAG(hsmbus, Flag)) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + } + } + + return HAL_OK; +} + +/** + * @brief SMBUS Tx data register flush process. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXIS) != RESET) + { + hsmbus->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXE) == RESET) + { + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TXE); + } +} + +/** + * @brief Handle SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hsmbus SMBUS handle. + * @param DevAddress specifies the slave address to be programmed. + * @param Size specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the SMBUS START condition generation. + * This parameter can be one or a combination of the following values: + * @arg @ref SMBUS_RELOAD_MODE Enable Reload mode. + * @arg @ref SMBUS_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref SMBUS_SOFTEND_MODE Enable Software end mode and Reload mode. + * @arg @ref SMBUS_SENDPEC_MODE Enable Packet Error Calculation mode. + * @param Request New state of the SMBUS START condition generation. + * This parameter can be one of the following values: + * @arg @ref SMBUS_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref SMBUS_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref SMBUS_GENERATE_START_READ Generate Restart for read request. + * @arg @ref SMBUS_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_TRANSFER_MODE(Mode)); + assert_param(IS_SMBUS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hsmbus->Instance->CR2, + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Convert SMBUSx OTHER_xxx XferOptions to functional XferOptions. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus) +{ + /* if user set XferOptions to SMBUS_OTHER_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME */ + if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME; + } + /* else if user set XferOptions to SMBUS_OTHER_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE */ + else if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_NO_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_NO_PEC; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC; + } + else + { + /* Nothing to do */ + } +} +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus_ex.c new file mode 100644 index 000000000..646af16a2 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_smbus_ex.c @@ -0,0 +1,245 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_smbus_ex.c + * @author MCD Application Team + * @brief SMBUS Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of SMBUS Extended peripheral: + * + Extended features functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### SMBUS peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the SMBUS interface for STM32H7RSxx + devices contains the following additional features + + (+) Disable or enable wakeup from Stop mode(s) + + ##### How to use this driver ##### + ============================================================================== + (#) Configure the enable or disable of SMBUS Wake Up Mode using the functions : + (++) HAL_SMBUSEx_EnableWakeUp() + (++) HAL_SMBUSEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_SMBUSEx_ConfigFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SMBUSEx SMBUSEx + * @brief SMBUS Extended HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @defgroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable SMBUS wakeup from Stop mode(s). + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUSEx_EnableWakeUp(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hsmbus->Instance)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Enable wakeup from stop mode */ + hsmbus->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable SMBUS wakeup from Stop mode(s). + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUSEx_DisableWakeUp(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hsmbus->Instance)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Disable wakeup from stop mode */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Configure SMBUS Fast Mode Plus. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @param FastModePlus New state of the Fast Mode Plus. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUSEx_ConfigFastModePlus(SMBUS_HandleTypeDef *hsmbus, uint32_t FastModePlus) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_FASTMODEPLUS(FastModePlus)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + if (FastModePlus == SMBUS_FASTMODEPLUS_ENABLE) + { + /* Set SMBUSx FMP bit */ + hsmbus->Instance->CR1 |= (I2C_CR1_FMP); + } + else + { + /* Reset SMBUSx FMP bit */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_FMP); + } + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spdifrx.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spdifrx.c new file mode 100644 index 000000000..8edd76f1c --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spdifrx.c @@ -0,0 +1,1741 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spdifrx.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the SPDIFRX audio interface: + * + Initialization and Configuration + * + Data transfers functions + * + DMA transfers management + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The SPDIFRX HAL driver can be used as follow: + + (#) Declare SPDIFRX_HandleTypeDef handle structure. + (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API: + (##) Enable the SPDIFRX interface clock. + (##) SPDIFRX pins configuration: + (+++) Enable the clock for the SPDIFRX GPIOs. + (+++) Configure these SPDIFRX pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveCtrlFlow_IT() and + HAL_SPDIFRX_ReceiveDataFlow_IT() API's). + (+++) Configure the SPDIFRX interrupt priority. + (+++) Enable the NVIC SPDIFRX IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and + HAL_SPDIFRX_ReceiveCtrlFlow_DMA() API's). + (+++) Declare a DMA handle structure for the reception of the Data Flow channel. + (+++) Declare a DMA handle structure for the reception of the Control Flow channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters. + (+++) Configure the DMA Channel. + (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA CtrlRx/DataRx channel. + + (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, + stereo mode and masking of user bits using HAL_SPDIFRX_Init() function. + + -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros + __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process. + -@- Make sure that ck_spdif clock is configured. + + (#) Three operation modes are available within this driver : + + *** Polling mode for reception operation (for debug purpose) *** + ================================================================ + [..] + (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow() + (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow() + + *** Interrupt mode for reception operation *** + ========================================= + [..] + (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT() + (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveCtrlFlow_IT() + (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback + (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback + (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback + + *** DMA mode for reception operation *** + ======================================== + [..] + (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA() + (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveCtrlFlow_DMA() + (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback + (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback + (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback + (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop() + + *** SPDIFRX HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in SPDIFRX HAL driver. + (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDLE State) + (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State) + (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State) + (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts + (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts + (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not. + + [..] + (@) You can refer to the SPDIFRX HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use HAL_SPDIFRX_RegisterCallback() function to register an interrupt callback. + + The HAL_SPDIFRX_RegisterCallback() function allows to register the following callbacks: + (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. + (+) RxCpltCallback : SPDIFRX Data flow completed callback. + (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. + (+) CxCpltCallback : SPDIFRX Control flow completed callback. + (+) ErrorCallback : SPDIFRX error callback. + (+) MspInitCallback : SPDIFRX MspInit. + (+) MspDeInitCallback : SPDIFRX MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use HAL_SPDIFRX_UnRegisterCallback() function to reset a callback to the default + weak function. + The HAL_SPDIFRX_UnRegisterCallback() function takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset the following callbacks: + (+) RxHalfCpltCallback : SPDIFRX Data flow half completed callback. + (+) RxCpltCallback : SPDIFRX Data flow completed callback. + (+) CxHalfCpltCallback : SPDIFRX Control flow half completed callback. + (+) CxCpltCallback : SPDIFRX Control flow completed callback. + (+) ErrorCallback : SPDIFRX error callback. + (+) MspInitCallback : SPDIFRX MspInit. + (+) MspDeInitCallback : SPDIFRX MspDeInit. + + By default, after the HAL_SPDIFRX_Init() and when the state is HAL_SPDIFRX_STATE_RESET + all callbacks are set to the corresponding weak functions : + HAL_SPDIFRX_RxHalfCpltCallback() , HAL_SPDIFRX_RxCpltCallback(), HAL_SPDIFRX_CxHalfCpltCallback(), + HAL_SPDIFRX_CxCpltCallback() and HAL_SPDIFRX_ErrorCallback() + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_SPDIFRX_Init()/ HAL_SPDIFRX_DeInit() only when + these callbacks pointers are NULL (not registered beforehand). + If not, MspInit or MspDeInit callbacks pointers are not null, the HAL_SPDIFRX_Init() / HAL_SPDIFRX_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + Callbacks can be registered/unregistered in HAL_SPDIFRX_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_SPDIFRX_STATE_READY or HAL_SPDIFRX_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SPDIFRX_RegisterCallback() before calling HAL_SPDIFRX_DeInit() + or HAL_SPDIFRX_Init() function. + + When The compilation define USE_HAL_SPDIFRX_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SPDIFRX SPDIFRX + * @brief SPDIFRX HAL module driver + * @{ + */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#if defined (SPDIFRX) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SPDIFRX_Private_Defines SPDIFRX Private Defines + * @{ + */ +#define SPDIFRX_TIMEOUT_VALUE 10U +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SPDIFRX_Private_Functions + * @{ + */ +static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma); +static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma); +static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif); +static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif); +static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, + FlagStatus Status, uint32_t Timeout, uint32_t tickstart); +/** + * @} + */ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions + * @{ + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPDIFRX peripheral: + + (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with + the selected configuration: + (++) Input Selection (IN0, IN1,...) + (++) Maximum allowed re-tries during synchronization phase + (++) Wait for activity on SPDIF selected input + (++) Channel status selection (from channel A or B) + (++) Data format (LSB, MSB, ...) + (++) Stereo mode + (++) User bits masking (PT,C,U,V,...) + + (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration + of the selected SPDIFRXx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the SPDIFRX according to the specified parameters + * in the SPDIFRX_InitTypeDef and create the associated handle. + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif) +{ + uint32_t tmpreg; + + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the SPDIFRX parameters */ + assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode)); + assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection)); + assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries)); + assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity)); + assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection)); + assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat)); + assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask)); + assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask)); + assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask)); + assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask)); + assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.SymbolClockGen)); + assert_param(IS_SYMBOL_CLOCK_GEN(hspdif->Init.BackupSymbolClockGen)); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + if (hspdif->State == HAL_SPDIFRX_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspdif->Lock = HAL_UNLOCKED; + + hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; /* Legacy weak CxHalfCpltCallback */ + hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; /* Legacy weak CxCpltCallback */ + hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hspdif->MspInitCallback == NULL) + { + hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hspdif->MspInitCallback(hspdif); + } +#else + if (hspdif->State == HAL_SPDIFRX_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspdif->Lock = HAL_UNLOCKED; + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_SPDIFRX_MspInit(hspdif); + } +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + + /* SPDIFRX peripheral state is BUSY */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Disable SPDIFRX interface (IDLE State) */ + __HAL_SPDIFRX_IDLE(hspdif); + + /* Reset the old SPDIFRX CR configuration */ + tmpreg = hspdif->Instance->CR; + + tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | + SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK | + SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA | + SPDIFRX_CR_CKSEN | SPDIFRX_CR_CKSBKPEN | + SPDIFRX_CR_INSEL); + + /* Sets the new configuration of the SPDIFRX peripheral */ + tmpreg |= (hspdif->Init.StereoMode | + hspdif->Init.InputSelection | + hspdif->Init.Retries | + hspdif->Init.WaitForActivity | + hspdif->Init.ChannelSelection | + hspdif->Init.DataFormat | + hspdif->Init.PreambleTypeMask | + hspdif->Init.ChannelStatusMask | + hspdif->Init.ValidityBitMask | + hspdif->Init.ParityErrorMask + ); + + if (hspdif->Init.SymbolClockGen == ENABLE) + { + tmpreg |= SPDIFRX_CR_CKSEN; + } + + if (hspdif->Init.BackupSymbolClockGen == ENABLE) + { + tmpreg |= SPDIFRX_CR_CKSBKPEN; + } + + hspdif->Instance->CR = tmpreg; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* SPDIFRX peripheral state is READY*/ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the SPDIFRX peripheral + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance)); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Disable SPDIFRX interface (IDLE state) */ + __HAL_SPDIFRX_IDLE(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + if (hspdif->MspDeInitCallback == NULL) + { + hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hspdif->MspDeInitCallback(hspdif); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPDIFRX_MspDeInit(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* SPDIFRX peripheral state is RESET*/ + hspdif->State = HAL_SPDIFRX_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; +} + +/** + * @brief SPDIFRX MSP Init + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_MspInit could be implemented in the user file + */ +} + +/** + * @brief SPDIFRX MSP DeInit + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SPDIFRX Callback + * To be used instead of the weak predefined callback + * @param hspdif SPDIFRX handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID + * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID + * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID + * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID + * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID + * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, + pSPDIFRX_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspdif); + + if (HAL_SPDIFRX_STATE_READY == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_RX_HALF_CB_ID : + hspdif->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_RX_CPLT_CB_ID : + hspdif->RxCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_CX_HALF_CB_ID : + hspdif->CxHalfCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_CX_CPLT_CB_ID : + hspdif->CxCpltCallback = pCallback; + break; + + case HAL_SPDIFRX_ERROR_CB_ID : + hspdif->ErrorCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = pCallback; + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + return status; +} + +/** + * @brief Unregister a SPDIFRX Callback + * SPDIFRX callback is redirected to the weak predefined callback + * @param hspdif SPDIFRX handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SPDIFRX_RX_HALF_CB_ID SPDIFRX Data flow half completed callback ID + * @arg @ref HAL_SPDIFRX_RX_CPLT_CB_ID SPDIFRX Data flow completed callback ID + * @arg @ref HAL_SPDIFRX_CX_HALF_CB_ID SPDIFRX Control flow half completed callback ID + * @arg @ref HAL_SPDIFRX_CX_CPLT_CB_ID SPDIFRX Control flow completed callback ID + * @arg @ref HAL_SPDIFRX_ERROR_CB_ID SPDIFRX error callback ID + * @arg @ref HAL_SPDIFRX_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SPDIFRX_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, + HAL_SPDIFRX_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspdif); + + if (HAL_SPDIFRX_STATE_READY == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_RX_HALF_CB_ID : + hspdif->RxHalfCpltCallback = HAL_SPDIFRX_RxHalfCpltCallback; + break; + + case HAL_SPDIFRX_RX_CPLT_CB_ID : + hspdif->RxCpltCallback = HAL_SPDIFRX_RxCpltCallback; + break; + + case HAL_SPDIFRX_CX_HALF_CB_ID : + hspdif->CxHalfCpltCallback = HAL_SPDIFRX_CxHalfCpltCallback; + break; + + case HAL_SPDIFRX_CX_CPLT_CB_ID : + hspdif->CxCpltCallback = HAL_SPDIFRX_CxCpltCallback; + break; + + case HAL_SPDIFRX_ERROR_CB_ID : + hspdif->ErrorCallback = HAL_SPDIFRX_ErrorCallback; + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPDIFRX_STATE_RESET == hspdif->State) + { + switch (CallbackID) + { + case HAL_SPDIFRX_MSPINIT_CB_ID : + hspdif->MspInitCallback = HAL_SPDIFRX_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPDIFRX_MSPDEINIT_CB_ID : + hspdif->MspDeInitCallback = HAL_SPDIFRX_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspdif); + return status; +} + +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + +/** + * @brief Set the SPDIFRX data format according to the specified parameters in the SPDIFRX_InitTypeDef. + * @param hspdif SPDIFRX handle + * @param sDataFormat SPDIFRX data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat) +{ + uint32_t tmpreg; + + /* Check the SPDIFRX handle allocation */ + if (hspdif == NULL) + { + return HAL_ERROR; + } + + /* Check the SPDIFRX parameters */ + assert_param(IS_STEREO_MODE(sDataFormat.StereoMode)); + assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat)); + assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask)); + assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask)); + assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask)); + assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask)); + + /* Reset the old SPDIFRX CR configuration */ + tmpreg = hspdif->Instance->CR; + + if (((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) && + (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) || + ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode))) + { + return HAL_ERROR; + } + + tmpreg &= ~(SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | + SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK); + + /* Configure the new data format */ + tmpreg |= (sDataFormat.StereoMode | + sDataFormat.DataFormat | + sDataFormat.PreambleTypeMask | + sDataFormat.ChannelStatusMask | + sDataFormat.ValidityBitMask | + sDataFormat.ParityErrorMask); + + hspdif->Instance->CR = tmpreg; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim +=============================================================================== + ##### IO operation functions ##### +=============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPDIFRX data + transfers. + + (#) There is two mode of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer start-up. + The end of the data processing will be indicated through the + dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_SPDIFRX_ReceiveDataFlow() + (++) HAL_SPDIFRX_ReceiveCtrlFlow() + (+@) Do not use blocking mode to receive both control and data flow at the same time. + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_SPDIFRX_ReceiveCtrlFlow_IT() + (++) HAL_SPDIFRX_ReceiveDataFlow_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_SPDIFRX_ReceiveCtrlFlow_DMA() + (++) HAL_SPDIFRX_ReceiveDataFlow_DMA() + + (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode: + (++) HAL_SPDIFRX_RxCpltCallback() + (++) HAL_SPDIFRX_CxCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Receives an amount of data (Data Flow) in blocking mode. + * @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains + * the configuration information for SPDIFRX module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t sizeCounter = Size; + uint32_t *pTmpBuf = pData; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspdif->State == HAL_SPDIFRX_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Start synchronisation */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until SYNCD flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + + /* Receive data flow */ + while (sizeCounter > 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until RXNE flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*pTmpBuf) = hspdif->Instance->DR; + pTmpBuf++; + sizeCounter--; + } + + /* SPDIFRX ready */ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives an amount of data (Control Flow) in blocking mode. + * @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains + * the configuration information for SPDIFRX module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t sizeCounter = Size; + uint32_t *pTmpBuf = pData; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspdif->State == HAL_SPDIFRX_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_BUSY; + + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until SYNCD flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + + /* Receive control flow */ + while (sizeCounter > 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until CSRNE flag is set */ + if (SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_TIMEOUT; + } + + (*pTmpBuf) = hspdif->Instance->CSR; + pTmpBuf++; + sizeCounter--; + } + + /* SPDIFRX ready */ + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample to be received . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pRxBuffPtr = pData; + hspdif->RxXferSize = Size; + hspdif->RxXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* Check if a receive process is ongoing or not */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; + + /* Enable the SPDIFRX PE Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Enable the SPDIFRX OVR Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Enable the SPDIFRX RXNE interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE); + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFRXEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt + process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Control Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample (Control Flow) to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pCsBuffPtr = pData; + hspdif->CsXferSize = Size; + hspdif->CsXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + + /* Check if a receive process is ongoing or not */ + hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; + + /* Enable the SPDIFRX PE Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Enable the SPDIFRX OVR Error Interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Enable the SPDIFRX CSRNE interrupt */ + __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFRXEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt + process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Data Flow) mode with DMA + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data sample to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_CX)) + { + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->pRxBuffPtr = pData; + hspdif->RxXferSize = Size; + hspdif->RxXferCount = Size; + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; + + /* Set the SPDIFRX Rx DMA Half transfer complete callback */ + hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt; + + /* Set the SPDIFRX Rx DMA transfer complete callback */ + hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt; + + /* Set the DMA error callback */ + hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError; + + /* Enable the DMA request */ + if ((hspdif->hdmaDrRx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspdif->hdmaDrRx->LinkedListQueue != NULL) + { + hspdif->hdmaDrRx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = (uint32_t) Size * 4U; + hspdif->hdmaDrRx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t) &hspdif->Instance->DR; + hspdif->hdmaDrRx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t) hspdif->pRxBuffPtr; + + if (HAL_DMAEx_List_Start_IT(hspdif->hdmaDrRx) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + else + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + else + { + if (HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, + (uint32_t) Size * 4U) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + + /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/ + hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN; + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFRXEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt + process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data (Control Flow) with DMA + * @param hspdif SPDIFRX handle + * @param pData a 32-bit pointer to the Receive data buffer. + * @param Size number of data (Control Flow) sample to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveCtrlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) +{ + uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); + + const HAL_SPDIFRX_StateTypeDef tempState = hspdif->State; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if ((tempState == HAL_SPDIFRX_STATE_READY) || (tempState == HAL_SPDIFRX_STATE_BUSY_RX)) + { + hspdif->pCsBuffPtr = pData; + hspdif->CsXferSize = Size; + hspdif->CsXferCount = Size; + + /* Process Locked */ + __HAL_LOCK(hspdif); + + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; + hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; + + /* Set the SPDIFRX Rx DMA Half transfer complete callback */ + hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt; + + /* Set the SPDIFRX Rx DMA transfer complete callback */ + hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt; + + /* Set the DMA error callback */ + hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError; + + /* Enable the DMA request */ + if ((hspdif->hdmaCsRx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspdif->hdmaCsRx->LinkedListQueue != NULL) + { + hspdif->hdmaCsRx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = (uint32_t) Size * 4U; + hspdif->hdmaCsRx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t) &hspdif->Instance->CSR; + hspdif->hdmaCsRx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t) hspdif->pCsBuffPtr; + + if (HAL_DMAEx_List_Start_IT(hspdif->hdmaCsRx) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + else + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + else + { + if (HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, + (uint32_t) Size * 4U) != HAL_OK) + { + /* Set SPDIFRX error */ + hspdif->ErrorCode = HAL_SPDIFRX_ERROR_DMA; + + /* Set SPDIFRX state */ + hspdif->State = HAL_SPDIFRX_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_ERROR; + } + } + + /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/ + hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN; + + if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFRXEN) != SPDIFRX_STATE_RCV) + { + /* Start synchronization */ + __HAL_SPDIFRX_SYNC(hspdif); + + /* Wait until SYNCD flag is set */ + do + { + if (count == 0U) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt + process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + count--; + } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); + + /* Start reception */ + __HAL_SPDIFRX_RCV(hspdif); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief stop the audio stream receive from the Media. + * @param hspdif SPDIFRX handle + * @retval None + */ +HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Process Locked */ + __HAL_LOCK(hspdif); + + /* Disable the SPDIFRX DMA requests */ + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); + + /* Disable the SPDIFRX DMA channel */ + if (hspdif->hdmaDrRx != NULL) + { + __HAL_DMA_DISABLE(hspdif->hdmaDrRx); + } + if (hspdif->hdmaCsRx != NULL) + { + __HAL_DMA_DISABLE(hspdif->hdmaCsRx); + } + + /* Disable SPDIFRX peripheral */ + __HAL_SPDIFRX_IDLE(hspdif); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_OK; +} + +/** + * @brief This function handles SPDIFRX interrupt request. + * @param hspdif SPDIFRX handle + * @retval HAL status + */ +void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif) +{ + uint32_t itFlag = hspdif->Instance->SR; + uint32_t itSource = hspdif->Instance->IMR; + + /* SPDIFRX in mode Data Flow Reception */ + if (((itFlag & SPDIFRX_FLAG_RXNE) == SPDIFRX_FLAG_RXNE) && ((itSource & SPDIFRX_IT_RXNE) == SPDIFRX_IT_RXNE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE); + SPDIFRX_ReceiveDataFlow_IT(hspdif); + } + + /* SPDIFRX in mode Control Flow Reception */ + if (((itFlag & SPDIFRX_FLAG_CSRNE) == SPDIFRX_FLAG_CSRNE) && ((itSource & SPDIFRX_IT_CSRNE) == SPDIFRX_IT_CSRNE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE); + SPDIFRX_ReceiveControlFlow_IT(hspdif); + } + + /* SPDIFRX Overrun error interrupt occurred */ + if (((itFlag & SPDIFRX_FLAG_OVR) == SPDIFRX_FLAG_OVR) && ((itSource & SPDIFRX_IT_OVRIE) == SPDIFRX_IT_OVRIE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_OVRIE); + + /* Change the SPDIFRX error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR; + + /* the transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); + } + + /* SPDIFRX Parity error interrupt occurred */ + if (((itFlag & SPDIFRX_FLAG_PERR) == SPDIFRX_FLAG_PERR) && ((itSource & SPDIFRX_IT_PERRIE) == SPDIFRX_IT_PERRIE)) + { + __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_PERRIE); + + /* Change the SPDIFRX error code */ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE; + + /* the transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); + } +} + +/** + * @brief Rx Transfer (Data flow) half completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer (Data flow) completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx (Control flow) Transfer half completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer (Control flow) completed callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SPDIFRX error callbacks + * @param hspdif SPDIFRX handle + * @retval None + */ +__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspdif); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SPDIFRX_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim +=============================================================================== +##### Peripheral State and Errors functions ##### +=============================================================================== +[..] +This subsection permit to get in run-time the status of the peripheral +and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SPDIFRX state + * @param hspdif SPDIFRX handle + * @retval HAL state + */ +HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif) +{ + return hspdif->State; +} + +/** + * @brief Return the SPDIFRX error code + * @param hspdif SPDIFRX handle + * @retval SPDIFRX Error Code + */ +uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif) +{ + return hspdif->ErrorCode; +} + +/** + * @} + */ + +/** + * @brief DMA SPDIFRX receive process (Data flow) complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Rx DMA Request */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); + hspdif->RxXferCount = 0; + hspdif->State = HAL_SPDIFRX_STATE_READY; + } +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX receive process (Data flow) half complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxHalfCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxHalfCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA SPDIFRX receive process (Control flow) complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Cb DMA Request */ + hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); + hspdif->CsXferCount = 0; + + hspdif->State = HAL_SPDIFRX_STATE_READY; +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX receive process (Control flow) half complete callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxHalfCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxHalfCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPDIFRX communication error callback + * @param hdma DMA handle + * @retval None + */ +static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma) +{ + SPDIFRX_HandleTypeDef *hspdif = (SPDIFRX_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable Rx and Cb DMA Request */ + hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN)); + hspdif->RxXferCount = 0; + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Set the error code and execute error callback*/ + hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA; + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + /* The transfer is not stopped */ + hspdif->ErrorCallback(hspdif); +#else + /* The transfer is not stopped */ + HAL_SPDIFRX_ErrorCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ +} + +/** + * @brief Receive an amount of data (Data Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @retval None + */ +static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Receive data */ + (*hspdif->pRxBuffPtr) = hspdif->Instance->DR; + hspdif->pRxBuffPtr++; + hspdif->RxXferCount--; + + if (hspdif->RxXferCount == 0U) + { + /* Disable RXNE/PE and OVR interrupts */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->RxCpltCallback(hspdif); +#else + HAL_SPDIFRX_RxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data (Control Flow) with Interrupt + * @param hspdif SPDIFRX handle + * @retval None + */ +static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif) +{ + /* Receive data */ + (*hspdif->pCsBuffPtr) = hspdif->Instance->CSR; + hspdif->pCsBuffPtr++; + hspdif->CsXferCount--; + + if (hspdif->CsXferCount == 0U) + { + /* Disable CSRNE interrupt */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + +#if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) + hspdif->CxCpltCallback(hspdif); +#else + HAL_SPDIFRX_CxCpltCallback(hspdif); +#endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles SPDIFRX Communication Timeout. + * @param hspdif SPDIFRX handle + * @param Flag Flag checked + * @param Status Value of the flag expected + * @param Timeout Duration of the timeout + * @param tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, + FlagStatus Status, uint32_t Timeout, uint32_t tickstart) +{ + /* Wait until flag is set */ + while (__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt + process */ + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); + __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); + + hspdif->State = HAL_SPDIFRX_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspdif); + + return HAL_TIMEOUT; + } + } + } + + return HAL_OK; +} + +/** + * @} + */ + + +#endif /* SPDIFRX */ +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi.c new file mode 100644 index 000000000..ee04aea47 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi.c @@ -0,0 +1,3796 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process or DMA process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx + or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1UL + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : SPI Tx Completed callback + (+) RxCpltCallback : SPI Rx Completed callback + (+) TxRxCpltCallback : SPI TxRx Completed callback + (+) TxHalfCpltCallback : SPI Tx Half Completed callback + (+) RxHalfCpltCallback : SPI Rx Half Completed callback + (+) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (+) ErrorCallback : SPI Error callback + (+) AbortCpltCallback : SPI Abort callback + (+) SuspendCallback : SPI Suspend callback + (+) MspInitCallback : SPI Msp Init callback + (+) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : SPI Tx Completed callback + (+) RxCpltCallback : SPI Rx Completed callback + (+) TxRxCpltCallback : SPI TxRx Completed callback + (+) TxHalfCpltCallback : SPI Tx Half Completed callback + (+) RxHalfCpltCallback : SPI Rx Half Completed callback + (+) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (+) ErrorCallback : SPI Error callback + (+) AbortCpltCallback : SPI Abort callback + (+) SuspendCallback : SPI Suspend callback + (+) MspInitCallback : SPI Msp Init callback + (+) MspDeInitCallback : SPI Msp DeInit callback + + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + When The compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + SuspendCallback restriction: + SuspendCallback is called only when MasterReceiverAutoSusp is enabled and + EOT interrupt is activated. SuspendCallback is used in relation with functions + HAL_SPI_Transmit_IT, HAL_SPI_Receive_IT and HAL_SPI_TransmitReceive_IT. + + [..] + Circular mode restriction: + (+) The DMA circular mode cannot be used when the SPI is configured in these modes: + (++) Master 2Lines RxOnly + (++) Master 1Line Rx + (+) The CRC feature is not managed when the DMA circular mode is enabled + (+) The functions HAL_SPI_DMAPause()/ HAL_SPI_DMAResume() are not supported. Return always + HAL_ERROR with ErrorCode set to HAL_SPI_ERROR_NOT_SUPPORTED. + Those functions are maintained for backward compatibility reasons. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100UL +#define MAX_FIFO_LENGTH 16UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(const SPI_HandleTypeDef *hspi, uint32_t Flag, + FlagStatus FlagStatus, uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(SPI_HandleTypeDef *hspi); +static void SPI_TxISR_32BIT(SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(SPI_HandleTypeDef *hspi); +static void SPI_RxISR_32BIT(SPI_HandleTypeDef *hspi); +static void SPI_AbortTransfer(SPI_HandleTypeDef *hspi); +static void SPI_CloseTransfer(SPI_HandleTypeDef *hspi); +static uint32_t SPI_GetPacketSize(const SPI_HandleTypeDef *hspi); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + (++) FIFO transmission threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t crc_length; + uint32_t packet_length; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + if (IS_SPI_LIMITED_INSTANCE(hspi->Instance)) + { + assert_param(IS_SPI_LIMITED_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_LIMITED_FIFOTHRESHOLD(hspi->Init.FifoThreshold)); + } + else + { + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_FIFOTHRESHOLD(hspi->Init.FifoThreshold)); + } + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + } +#if (USE_SPI_CRC != 0UL) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if (IS_SPI_LIMITED_INSTANCE(hspi->Instance)) + { + assert_param(IS_SPI_LIMITED_CRC_LENGTH(hspi->Init.CRCLength)); + } + else + { + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_INITIALIZATION_PATTERN(hspi->Init.TxCRCInitializationPattern)); + assert_param(IS_SPI_CRC_INITIALIZATION_PATTERN(hspi->Init.RxCRCInitializationPattern)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + assert_param(IS_SPI_RDY_MASTER_MANAGEMENT(hspi->Init.ReadyMasterManagement)); + assert_param(IS_SPI_RDY_POLARITY(hspi->Init.ReadyPolarity)); + assert_param(IS_SPI_MASTER_RX_AUTOSUSP(hspi->Init.MasterReceiverAutoSusp)); + + /* Verify that the SPI instance supports Data Size higher than 16bits */ + if ((IS_SPI_LIMITED_INSTANCE(hspi->Instance)) && (hspi->Init.DataSize > SPI_DATASIZE_16BIT)) + { + return HAL_ERROR; + } + + /* Verify that the SPI instance supports requested data packing */ + packet_length = SPI_GetPacketSize(hspi); + if (((IS_SPI_LIMITED_INSTANCE(hspi->Instance)) && (packet_length > SPI_LOWEND_FIFO_SIZE)) || + ((IS_SPI_FULL_INSTANCE(hspi->Instance)) && (packet_length > SPI_HIGHEND_FIFO_SIZE))) + { + return HAL_ERROR; + } +#if (USE_SPI_CRC != 0UL) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Verify that the SPI instance supports CRC Length higher than 16bits */ + if ((IS_SPI_LIMITED_INSTANCE(hspi->Instance)) && (hspi->Init.CRCLength > SPI_CRC_LENGTH_16BIT)) + { + return HAL_ERROR; + } + + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + crc_length = (hspi->Init.DataSize >> SPI_CFG1_DSIZE_Pos) << SPI_CFG1_CRCSIZE_Pos; + } + else + { + crc_length = hspi->Init.CRCLength; + } + + /* Verify that the CRC Length is higher than DataSize */ + if ((hspi->Init.DataSize >> SPI_CFG1_DSIZE_Pos) > (crc_length >> SPI_CFG1_CRCSIZE_Pos)) + { + return HAL_ERROR; + } + } + else + { + crc_length = hspi->Init.DataSize << SPI_CFG1_CRCSIZE_Pos; + } +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hspi->SuspendCallback = HAL_SPI_SuspendCallback; /* Legacy weak SuspendCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_SPI_CRC == 0) + /* Keep the default value of CRCSIZE in case of CRC is not used */ + crc_length = hspi->Instance->CFG1 & SPI_CFG1_CRCSIZE; +#endif /* USE_SPI_CRC */ + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit, CRC calculation state, CRC Length */ + + /* SPIx NSS Software Management Configuration */ + if ((hspi->Init.NSS == SPI_NSS_SOFT) && (((hspi->Init.Mode == SPI_MODE_MASTER) && \ + (hspi->Init.NSSPolarity == SPI_NSS_POLARITY_LOW)) || \ + ((hspi->Init.Mode == SPI_MODE_SLAVE) && \ + (hspi->Init.NSSPolarity == SPI_NSS_POLARITY_HIGH)))) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSI); + } + + /* SPIx Master Rx Auto Suspend Configuration */ + if (((hspi->Init.Mode & SPI_MODE_MASTER) == SPI_MODE_MASTER) && (hspi->Init.DataSize >= SPI_DATASIZE_8BIT)) + { + MODIFY_REG(hspi->Instance->CR1, SPI_CR1_MASRX, hspi->Init.MasterReceiverAutoSusp); + } + else + { + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_MASRX); + } + + /* SPIx CFG1 Configuration */ + WRITE_REG(hspi->Instance->CFG1, (hspi->Init.BaudRatePrescaler | hspi->Init.CRCCalculation | crc_length | + hspi->Init.FifoThreshold | hspi->Init.DataSize)); + + /* SPIx CFG2 Configuration */ + WRITE_REG(hspi->Instance->CFG2, (hspi->Init.NSSPMode | hspi->Init.TIMode | + hspi->Init.NSSPolarity | hspi->Init.NSS | + hspi->Init.CLKPolarity | hspi->Init.CLKPhase | + hspi->Init.FirstBit | hspi->Init.Mode | + hspi->Init.MasterInterDataIdleness | hspi->Init.Direction | + hspi->Init.MasterSSIdleness | hspi->Init.IOSwap | + hspi->Init.ReadyMasterManagement | hspi->Init.ReadyPolarity)); + +#if (USE_SPI_CRC != 0UL) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Initialize TXCRC Pattern Initial Value */ + if (hspi->Init.TxCRCInitializationPattern == SPI_CRC_INITIALIZATION_ALL_ONE_PATTERN) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_TCRCINI); + } + else + { + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_TCRCINI); + } + + /* Initialize RXCRC Pattern Initial Value */ + if (hspi->Init.RxCRCInitializationPattern == SPI_CRC_INITIALIZATION_ALL_ONE_PATTERN) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_RCRCINI); + } + else + { + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_RCRCINI); + } + + /* Enable 33/17 bits CRC computation */ + if (((IS_SPI_LIMITED_INSTANCE(hspi->Instance)) && (crc_length == SPI_CRC_LENGTH_16BIT)) || + ((IS_SPI_FULL_INSTANCE(hspi->Instance)) && (crc_length == SPI_CRC_LENGTH_32BIT))) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRC33_17); + } + else + { + CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRC33_17); + } + + /* Write CRC polynomial in SPI Register */ + WRITE_REG(hspi->Instance->CRCPOLY, hspi->Init.CRCPolynomial); + } +#endif /* USE_SPI_CRC */ + + /* Insure that Underrun configuration is managed only by Salve */ + if (hspi->Init.Mode == SPI_MODE_SLAVE) + { +#if (USE_SPI_CRC != 0UL) + MODIFY_REG(hspi->Instance->CFG1, SPI_CFG1_UDRCFG, SPI_CFG1_UDRCFG); +#endif /* USE_SPI_CRC */ + } + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + /* Insure that AFCNTR is managed only by Master */ + if ((hspi->Init.Mode & SPI_MODE_MASTER) == SPI_MODE_MASTER) + { + /* Alternate function GPIOs control */ + MODIFY_REG(hspi->Instance->CFG2, SPI_CFG2_AFCNTR, (hspi->Init.MasterKeepIOState)); + } + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Lock the process */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_SUSPEND_CB_ID : + hspi->SuspendCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_SUSPEND_CB_ID : + hspi->SuspendCallback = HAL_SPI_SuspendCallback; /* Legacy weak SuspendCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (##) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (##) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData : pointer to data buffer + * @param Size : amount of data to be sent + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->TXDR)); +#endif /* __GNUC__ */ + + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_TXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = NULL; + hspi->RxXferSize = (uint16_t) 0UL; + hspi->RxXferCount = (uint16_t) 0UL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_TX(hspi); + } + else + { + SPI_2LINES_TX(hspi); + } + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Transmit data in 32 Bit mode */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + /* Transmit data in 32 Bit mode */ + while (hspi->TxXferCount > 0UL) + { + /* Wait until TXP flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) + { + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + /* Transmit data in 16 Bit mode */ + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0UL) + { + /* Wait until TXP flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) + { + if ((hspi->TxXferCount > 1UL) && (hspi->Init.FifoThreshold > SPI_FIFO_THRESHOLD_01DATA)) + { + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount -= (uint16_t)2UL; + } + else + { +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hspi->pTxBuffPtr); +#else + *((__IO uint16_t *)&hspi->Instance->TXDR) = *((const uint16_t *)hspi->pTxBuffPtr); +#endif /* __GNUC__ */ + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + while (hspi->TxXferCount > 0UL) + { + /* Wait until TXP flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) + { + if ((hspi->TxXferCount > 3UL) && (hspi->Init.FifoThreshold > SPI_FIFO_THRESHOLD_03DATA)) + { + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount -= (uint16_t)4UL; + } + else if ((hspi->TxXferCount > 1UL) && (hspi->Init.FifoThreshold > SPI_FIFO_THRESHOLD_01DATA)) + { +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hspi->pTxBuffPtr); +#else + *((__IO uint16_t *)&hspi->Instance->TXDR) = *((const uint16_t *)hspi->pTxBuffPtr); +#endif /* __GNUC__ */ + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= (uint16_t)2UL; + } + else + { + *((__IO uint8_t *)&hspi->Instance->TXDR) = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + } + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + + /* Wait for Tx (and CRC) data to be sent */ + if (SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_EOT, RESET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + return errorcode; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData : pointer to data buffer + * @param Size : amount of data to be received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; +#if defined (__GNUC__) + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->RXDR)); +#endif /* __GNUC__ */ + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_RXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = NULL; + hspi->TxXferSize = (uint16_t) 0UL; + hspi->TxXferCount = (uint16_t) 0UL; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + else + { + SPI_2LINES_RX(hspi); + } + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Receive data in 32 Bit mode */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0UL) + { + /* Check the RXWNE/EOT flag */ + if ((hspi->Instance->SR & (SPI_FLAG_RXWNE | SPI_FLAG_EOT)) != 0UL) + { + *((uint32_t *)hspi->pRxBuffPtr) = *((__IO uint32_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint32_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + /* Receive data in 16 Bit mode */ + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0UL) + { + /* Check the RXP flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXP)) + { +#if defined (__GNUC__) + *((uint16_t *)hspi->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hspi->pRxBuffPtr) = *((__IO uint16_t *)&hspi->Instance->RXDR); +#endif /* __GNUC__ */ + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + /* Receive data in 8 Bit mode */ + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0UL) + { + /* Check the RXP flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXP)) + { + *((uint8_t *)hspi->pRxBuffPtr) = *((__IO uint8_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + +#if (USE_SPI_CRC != 0UL) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait for crc data to be received */ + if (SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_EOT, RESET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + } +#endif /* USE_SPI_CRC */ + + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer + * @param Size : amount of data to be sent and received + * @param Timeout: Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + HAL_StatusTypeDef errorcode = HAL_OK; +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->TXDR)); + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->RXDR)); +#endif /* __GNUC__ */ + + uint32_t tickstart; + uint16_t initial_TxXferCount; + uint16_t initial_RxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + initial_TxXferCount = Size; + initial_RxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + + /* Set Full-Duplex mode */ + SPI_2LINES(hspi); + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Transmit and Receive data in 32 Bit mode */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + while ((initial_TxXferCount > 0UL) || (initial_RxXferCount > 0UL)) + { + /* Check TXP flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) && (initial_TxXferCount > 0UL)) + { + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount --; + initial_TxXferCount = hspi->TxXferCount; + } + + /* Check RXWNE/EOT flag */ + if (((hspi->Instance->SR & (SPI_FLAG_RXWNE | SPI_FLAG_EOT)) != 0UL) && (initial_RxXferCount > 0UL)) + { + *((uint32_t *)hspi->pRxBuffPtr) = *((__IO uint32_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint32_t); + hspi->RxXferCount --; + initial_RxXferCount = hspi->RxXferCount; + } + + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + /* Transmit and Receive data in 16 Bit mode */ + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + while ((initial_TxXferCount > 0UL) || (initial_RxXferCount > 0UL)) + { + /* Check the TXP flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP) && (initial_TxXferCount > 0UL)) + { +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hspi->pTxBuffPtr); +#else + *((__IO uint16_t *)&hspi->Instance->TXDR) = *((const uint16_t *)hspi->pTxBuffPtr); +#endif /* __GNUC__ */ + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + initial_TxXferCount = hspi->TxXferCount; + } + + /* Check the RXP flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXP)) && (initial_RxXferCount > 0UL)) + { +#if defined (__GNUC__) + *((uint16_t *)hspi->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hspi->pRxBuffPtr) = *((__IO uint16_t *)&hspi->Instance->RXDR); +#endif /* __GNUC__ */ + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + initial_RxXferCount = hspi->RxXferCount; + } + + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + while ((initial_TxXferCount > 0UL) || (initial_RxXferCount > 0UL)) + { + /* Check the TXP flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) && (initial_TxXferCount > 0UL)) + { + *((__IO uint8_t *)&hspi->Instance->TXDR) = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + initial_TxXferCount = hspi->TxXferCount; + } + + /* Check the RXP flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXP)) && (initial_RxXferCount > 0UL)) + { + *((uint8_t *)hspi->pRxBuffPtr) = *((__IO uint8_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + initial_RxXferCount = hspi->RxXferCount; + } + + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_TIMEOUT); + hspi->State = HAL_SPI_STATE_READY; + return HAL_TIMEOUT; + } + } + } + + /* Wait for Tx/Rx (and CRC) data to be sent/received */ + if (SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_EOT, RESET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Call standard close procedure with error check */ + SPI_CloseTransfer(hspi); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size : amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_TXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = NULL; + hspi->RxXferSize = (uint16_t) 0UL; + hspi->RxXferCount = (uint16_t) 0UL; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + hspi->TxISR = SPI_TxISR_32BIT; + } + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_TX(hspi); + } + else + { + SPI_2LINES_TX(hspi); + } + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + /* Enable EOT, TXP, FRE, MODF and UDR interrupts */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_TXP | SPI_IT_UDR | SPI_IT_FRE | SPI_IT_MODF)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size : amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_RXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = NULL; + hspi->TxXferSize = (uint16_t) 0UL; + hspi->TxXferCount = (uint16_t) 0UL; + hspi->TxISR = NULL; + + /* Set the function for IT treatment */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + hspi->RxISR = SPI_RxISR_32BIT; + } + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + else + { + SPI_2LINES_RX(hspi); + } + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + /* Enable EOT, RXP, OVR, FRE and MODF interrupts */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_RXP | SPI_IT_OVR | SPI_IT_FRE | SPI_IT_MODF)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer + * @param Size : amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + uint32_t tmp_TxXferCount; + +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->TXDR)); +#endif /* __GNUC__ */ + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + tmp_TxXferCount = hspi->TxXferCount; + + /* Set the function for IT treatment */ + if ((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (IS_SPI_FULL_INSTANCE(hspi->Instance))) + { + hspi->TxISR = SPI_TxISR_32BIT; + hspi->RxISR = SPI_RxISR_32BIT; + } + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_RxISR_16BIT; + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->RxISR = SPI_RxISR_8BIT; + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Set Full-Duplex mode */ + SPI_2LINES(hspi); + + /* Set the number of data at current transfer */ + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + /* Fill in the TxFIFO */ + while ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXP)) && (tmp_TxXferCount != 0UL)) + { + /* Transmit data in 32 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_16BIT) + { + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount--; + tmp_TxXferCount = hspi->TxXferCount; + } + /* Transmit data in 16 Bit mode */ + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { +#if defined (__GNUC__) + *ptxdr_16bits = *((const uint16_t *)hspi->pTxBuffPtr); +#else + *((__IO uint16_t *)&hspi->Instance->TXDR) = *((const uint16_t *)hspi->pTxBuffPtr); +#endif /* __GNUC__ */ + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + tmp_TxXferCount = hspi->TxXferCount; + } + /* Transmit data in 8 Bit mode */ + else + { + *((__IO uint8_t *)&hspi->Instance->TXDR) = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + tmp_TxXferCount = hspi->TxXferCount; + } + } + + /* Enable EOT, DXP, UDR, OVR, FRE and MODF interrupts */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_DXP | SPI_IT_UDR | SPI_IT_OVR | SPI_IT_FRE | SPI_IT_MODF)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Start Master transfer */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; +} + + + + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size : amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_TXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = (uint16_t)0UL; + hspi->RxXferCount = (uint16_t)0UL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_TX(hspi); + } + else + { + SPI_2LINES_TX(hspi); + } + + /* Packing mode management is enabled by the DMA settings */ + if (((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (hspi->hdmatx->Init.SrcDataWidth != DMA_SRC_DATAWIDTH_WORD) && \ + (IS_SPI_FULL_INSTANCE(hspi->Instance))) || \ + ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_BYTE))) + { + /* Restriction the DMA data received is not allowed in this mode */ + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Adjust XferCount according to DMA alignment / Data size */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 1UL) >> 1UL; + } + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 3UL) >> 2UL; + } + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 1UL) >> 1UL; + } + } + else + { + /* Adjustment done */ + } + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Clear TXDMAEN bit*/ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN); + + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + hspi->TxXferCount = Size; + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + hspi->TxXferCount = Size * 2U; + } + else + { + hspi->TxXferCount = Size * 4U; + } + + /* Enable the Tx DMA Stream/Channel */ + if ((hspi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspi->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hspi->TxXferCount; + + /* Set DMA source address */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hspi->pTxBuffPtr; + + /* Set DMA destination address */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hspi->Instance->TXDR; + + errorcode = HAL_DMAEx_List_Start_IT(hspi->hdmatx); + } + else + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->TXDR, + hspi->TxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + + /* Set the number of data at current transfer */ + if (hspi->hdmatx->Mode == DMA_LINKEDLIST_CIRCULAR) + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, 0UL); + } + else + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + } + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_UDR | SPI_IT_FRE | SPI_IT_MODF)); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData: pointer to data buffer + * @param Size : amount of data to be sent + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE_2LINES_RXONLY(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = (uint16_t) 0UL; + hspi->TxXferCount = (uint16_t) 0UL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + SPI_1LINE_RX(hspi); + } + else + { + SPI_2LINES_RX(hspi); + } + + /* Packing mode management is enabled by the DMA settings */ + if (((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (hspi->hdmarx->Init.DestDataWidth != DMA_DEST_DATAWIDTH_WORD) && \ + (IS_SPI_FULL_INSTANCE(hspi->Instance))) || \ + ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_BYTE))) + { + /* Restriction the DMA data received is not allowed in this mode */ + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Clear RXDMAEN bit */ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_RXDMAEN); + + /* Adjust XferCount according to DMA alignment / Data size */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_HALFWORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 1UL) >> 1UL; + } + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_WORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 3UL) >> 2UL; + } + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_WORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 1UL) >> 1UL; + } + } + else + { + /* Adjustment done */ + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + hspi->RxXferCount = Size; + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + hspi->RxXferCount = Size * 2U; + } + else + { + hspi->RxXferCount = Size * 4U; + } + + /* Enable the Rx DMA Stream/Channel */ + if ((hspi->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspi->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hspi->RxXferCount; + + /* Set DMA source address */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hspi->Instance->RXDR; + + /* Set DMA destination address */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hspi->pRxBuffPtr; + + errorcode = HAL_DMAEx_List_Start_IT(hspi->hdmarx); + } + else + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->RXDR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + + /* Set the number of data at current transfer */ + if (hspi->hdmarx->Mode == DMA_LINKEDLIST_CIRCULAR) + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, 0UL); + } + else + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CFG1, SPI_CFG1_RXDMAEN); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_OVR | SPI_IT_FRE | SPI_IT_MODF)); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi : pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData: pointer to transmission data buffer + * @param pRxData: pointer to reception data buffer + * @param Size : amount of data to be sent + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef errorcode; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Lock the process */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + __HAL_UNLOCK(hspi); + return errorcode; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0UL)) + { + errorcode = HAL_ERROR; + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (const uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + + /* Set Full-Duplex mode */ + SPI_2LINES(hspi); + + /* Reset the Tx/Rx DMA bits */ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN); + + /* Packing mode management is enabled by the DMA settings */ + if (((hspi->Init.DataSize > SPI_DATASIZE_16BIT) && (hspi->hdmarx->Init.DestDataWidth != DMA_DEST_DATAWIDTH_WORD) && \ + (IS_SPI_FULL_INSTANCE(hspi->Instance))) || \ + ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_BYTE))) + { + /* Restriction the DMA data received is not allowed in this mode */ + errorcode = HAL_ERROR; + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Adjust XferCount according to DMA alignment / Data size */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_HALFWORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 1UL) >> 1UL; + } + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 3UL) >> 2UL; + } + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_HALFWORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 1UL) >> 1UL; + } + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_WORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 3UL) >> 2UL; + } + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + if (hspi->hdmatx->Init.SrcDataWidth == DMA_SRC_DATAWIDTH_WORD) + { + hspi->TxXferCount = (hspi->TxXferCount + (uint16_t) 1UL) >> 1UL; + } + if (hspi->hdmarx->Init.DestDataWidth == DMA_DEST_DATAWIDTH_WORD) + { + hspi->RxXferCount = (hspi->RxXferCount + (uint16_t) 1UL) >> 1UL; + } + } + else + { + /* Adjustment done */ + } + + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + hspi->RxXferCount = Size; + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + hspi->RxXferCount = Size * 2U; + } + else + { + hspi->RxXferCount = Size * 4U; + } + /* Enable the Rx DMA Stream/Channel */ + if ((hspi->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspi->hdmarx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hspi->RxXferCount; + + /* Set DMA source address */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hspi->Instance->RXDR; + + /* Set DMA destination address */ + hspi->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)hspi->pRxBuffPtr; + + errorcode = HAL_DMAEx_List_Start_IT(hspi->hdmarx); + } + else + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->RXDR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CFG1, SPI_CFG1_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + hspi->TxXferCount = Size; + } + else if (hspi->Init.DataSize <= SPI_DATASIZE_16BIT) + { + hspi->TxXferCount = Size * 2U; + } + else + { + hspi->TxXferCount = Size * 4U; + } + + /* Enable the Tx DMA Stream/Channel */ + if ((hspi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hspi->hdmatx->LinkedListQueue != NULL) + { + /* Set DMA data size */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hspi->TxXferCount; + + /* Set DMA source address */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)hspi->pTxBuffPtr; + + /* Set DMA destination address */ + hspi->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hspi->Instance->TXDR; + + errorcode = HAL_DMAEx_List_Start_IT(hspi->hdmatx); + } + else + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + } + else + { + errorcode = HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->TXDR, + hspi->TxXferCount); + } + + /* Check status */ + if (errorcode != HAL_OK) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + hspi->State = HAL_SPI_STATE_READY; + errorcode = HAL_ERROR; + return errorcode; + } + + if ((hspi->hdmarx->Mode == DMA_LINKEDLIST_CIRCULAR) && (hspi->hdmatx->Mode == DMA_LINKEDLIST_CIRCULAR)) + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, 0UL); + } + else + { + MODIFY_REG(hspi->Instance->CR2, SPI_CR2_TSIZE, Size); + } + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_OVR | SPI_IT_UDR | SPI_IT_FRE | SPI_IT_MODF)); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + /* Master transfer start */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSTART); + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * @note This procedure performs following operations : + * + Disable SPI Interrupts (depending of transfer direction) + * + Disable the DMA transfer in the peripheral register (if enabled) + * + Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * + Set handle State to READY. + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + + __IO uint32_t count; + + /* Lock the process */ + __HAL_LOCK(hspi); + + /* Set hspi->state to aborting to avoid any interaction */ + hspi->State = HAL_SPI_STATE_ABORT; + + /* Initialized local variable */ + errorcode = HAL_OK; + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24UL / 1000UL); + + /* If master communication on going, make sure current frame is done before closing the connection */ + if (HAL_IS_BIT_SET(hspi->Instance->CR1, SPI_CR1_CSTART)) + { + /* Disable EOT interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_EOT); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (HAL_IS_BIT_SET(hspi->Instance->IER, SPI_IT_EOT)); + + /* Request a Suspend transfer */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSUSP); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (HAL_IS_BIT_SET(hspi->Instance->CR1, SPI_CR1_CSTART)); + + /* Clear SUSP flag */ + __HAL_SPI_CLEAR_SUSPFLAG(hspi); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_SUSP)); + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN)) + { + if (hspi->hdmatx != NULL) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hspi->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CFG1, SPI_CFG1_RXDMAEN)) + { + if (hspi->hdmarx != NULL) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hspi->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + } + + /* Proceed with abort procedure */ + SPI_AbortTransfer(hspi); + + /* Check error during Abort procedure */ + if (HAL_IS_BIT_SET(hspi->ErrorCode, HAL_SPI_ERROR_ABORT)) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * @note This procedure performs following operations : + * + Disable SPI Interrupts (depending of transfer direction) + * + Disable the DMA transfer in the peripheral register (if enabled) + * + Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * + Set handle State to READY + * + At abort completion, call user abort complete callback. + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + uint32_t dma_tx_abort_done = 1UL; + uint32_t dma_rx_abort_done = 1UL; + + /* Set hspi->state to aborting to avoid any interaction */ + hspi->State = HAL_SPI_STATE_ABORT; + + /* Initialized local variable */ + errorcode = HAL_OK; + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24UL / 1000UL); + + /* If master communication on going, make sure current frame is done before closing the connection */ + if (HAL_IS_BIT_SET(hspi->Instance->CR1, SPI_CR1_CSTART)) + { + /* Disable EOT interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_EOT); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (HAL_IS_BIT_SET(hspi->Instance->IER, SPI_IT_EOT)); + + /* Request a Suspend transfer */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CSUSP); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (HAL_IS_BIT_SET(hspi->Instance->CR1, SPI_CR1_CSTART)); + + /* Clear SUSP flag */ + __HAL_SPI_CLEAR_SUSPFLAG(hspi); + do + { + count--; + if (count == 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + } + while (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_SUSP)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialized + before any call to DMA Abort functions */ + + if (hspi->hdmatx != NULL) + { + if (HAL_IS_BIT_SET(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN)) + { + /* Set DMA Abort Complete callback if SPI DMA Tx request if enabled */ + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + + dma_tx_abort_done = 0UL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hspi->hdmatx) == HAL_DMA_ERROR_NO_XFER) + { + dma_tx_abort_done = 1UL; + hspi->hdmatx->XferAbortCallback = NULL; + } + } + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + + if (hspi->hdmarx != NULL) + { + if (HAL_IS_BIT_SET(hspi->Instance->CFG1, SPI_CFG1_RXDMAEN)) + { + /* Set DMA Abort Complete callback if SPI DMA Rx request if enabled */ + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + + dma_rx_abort_done = 0UL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hspi->hdmarx) == HAL_DMA_ERROR_NO_XFER) + { + dma_rx_abort_done = 1UL; + hspi->hdmarx->XferAbortCallback = NULL; + } + } + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* If no running DMA transfer, finish cleanup and call callbacks */ + if ((dma_tx_abort_done == 1UL) && (dma_rx_abort_done == 1UL)) + { + /* Proceed with abort procedure */ + SPI_AbortTransfer(hspi); + + /* Check error during Abort procedure */ + if (HAL_IS_BIT_SET(hspi->ErrorCode, HAL_SPI_ERROR_ABORT)) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * This API is not supported, it is maintained for backward compatibility. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL_ERROR + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Set error code to not supported */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_NOT_SUPPORTED); + + return HAL_ERROR; +} + +/** + * @brief Resume the DMA Transfer. + * This API is not supported, it is maintained for backward compatibility. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL_ERROR + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Set error code to not supported */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_NOT_SUPPORTED); + + return HAL_ERROR; +} + +/** + * @brief Stop the DMA Transfer. + * This API is not supported, it is maintained for backward compatibility. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL_ERROR + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + /* Set error code to not supported */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_NOT_SUPPORTED); + + return HAL_ERROR; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->IER; + uint32_t itflag = hspi->Instance->SR; + uint32_t trigger = itsource & itflag; + uint32_t cfg1 = hspi->Instance->CFG1; + uint32_t handled = 0UL; + + HAL_SPI_StateTypeDef State = hspi->State; +#if defined (__GNUC__) + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->RXDR)); +#endif /* __GNUC__ */ + + /* SPI in SUSPEND mode ----------------------------------------------------*/ + if (HAL_IS_BIT_SET(itflag, SPI_FLAG_SUSP) && HAL_IS_BIT_SET(itsource, SPI_FLAG_EOT)) + { + /* Clear the Suspend flag */ + __HAL_SPI_CLEAR_SUSPFLAG(hspi); + + /* Suspend on going, Call the Suspend callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->SuspendCallback(hspi); +#else + HAL_SPI_SuspendCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + + /* SPI in mode Transmitter and Receiver ------------------------------------*/ + if (HAL_IS_BIT_CLR(trigger, SPI_FLAG_OVR) && HAL_IS_BIT_CLR(trigger, SPI_FLAG_UDR) && \ + HAL_IS_BIT_SET(trigger, SPI_FLAG_DXP)) + { + hspi->TxISR(hspi); + hspi->RxISR(hspi); + handled = 1UL; + } + + /* SPI in mode Receiver ----------------------------------------------------*/ + if (HAL_IS_BIT_CLR(trigger, SPI_FLAG_OVR) && HAL_IS_BIT_SET(trigger, SPI_FLAG_RXP) && \ + HAL_IS_BIT_CLR(trigger, SPI_FLAG_DXP)) + { + hspi->RxISR(hspi); + handled = 1UL; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if (HAL_IS_BIT_CLR(trigger, SPI_FLAG_UDR) && HAL_IS_BIT_SET(trigger, SPI_FLAG_TXP) && \ + HAL_IS_BIT_CLR(trigger, SPI_FLAG_DXP)) + { + hspi->TxISR(hspi); + handled = 1UL; + } + + + if (handled != 0UL) + { + return; + } + + /* SPI End Of Transfer: DMA or IT based transfer */ + if (HAL_IS_BIT_SET(trigger, SPI_FLAG_EOT)) + { + /* Clear EOT/TXTF/SUSP flag */ + __HAL_SPI_CLEAR_EOTFLAG(hspi); + __HAL_SPI_CLEAR_TXTFFLAG(hspi); + __HAL_SPI_CLEAR_SUSPFLAG(hspi); + + /* Disable EOT interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_EOT); + + /* For the IT based receive extra polling maybe required for last packet */ + if (HAL_IS_BIT_CLR(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN)) + { + /* Pooling remaining data */ + while (hspi->RxXferCount != 0UL) + { + /* Receive data in 32 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_16BIT) + { + *((uint32_t *)hspi->pRxBuffPtr) = *((__IO uint32_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint32_t); + } + /* Receive data in 16 Bit mode */ + else if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { +#if defined (__GNUC__) + *((uint16_t *)hspi->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hspi->pRxBuffPtr) = *((__IO uint16_t *)&hspi->Instance->RXDR); +#endif /* __GNUC__ */ + hspi->pRxBuffPtr += sizeof(uint16_t); + } + /* Receive data in 8 Bit mode */ + else + { + *((uint8_t *)hspi->pRxBuffPtr) = *((__IO uint8_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint8_t); + } + + hspi->RxXferCount--; + } + } + + /* Call SPI Standard close procedure */ + SPI_CloseTransfer(hspi); + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + /* Call appropriate user callback */ + if (State == HAL_SPI_STATE_BUSY_TX_RX) + { + hspi->TxRxCpltCallback(hspi); + } + else if (State == HAL_SPI_STATE_BUSY_RX) + { + hspi->RxCpltCallback(hspi); + } + else if (State == HAL_SPI_STATE_BUSY_TX) + { + hspi->TxCpltCallback(hspi); + } +#else + /* Call appropriate user callback */ + if (State == HAL_SPI_STATE_BUSY_TX_RX) + { + HAL_SPI_TxRxCpltCallback(hspi); + } + else if (State == HAL_SPI_STATE_BUSY_RX) + { + HAL_SPI_RxCpltCallback(hspi); + } + else if (State == HAL_SPI_STATE_BUSY_TX) + { + HAL_SPI_TxCpltCallback(hspi); + } +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + else + { + /* End of the appropriate call */ + } + + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if ((trigger & (SPI_FLAG_MODF | SPI_FLAG_OVR | SPI_FLAG_FRE | SPI_FLAG_UDR)) != 0UL) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if ((trigger & SPI_FLAG_OVR) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if ((trigger & SPI_FLAG_MODF) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if ((trigger & SPI_FLAG_FRE) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + /* SPI Underrun error interrupt occurred ------------------------------------*/ + if ((trigger & SPI_FLAG_UDR) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_UDR); + __HAL_SPI_CLEAR_UDRFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_RXP | SPI_IT_TXP | SPI_IT_MODF | + SPI_IT_OVR | SPI_IT_FRE | SPI_IT_UDR)); + + /* Disable the SPI DMA requests if enabled */ + if (HAL_IS_BIT_SET(cfg1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN)) + { + /* Disable the SPI DMA requests */ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SPI Suspend callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_SuspendCallback(SPI_HandleTypeDef *hspi) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_SuspendCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(const SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(const SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hspi->State != HAL_SPI_STATE_ABORT) + { + if (hspi->hdmatx->Mode == DMA_LINKEDLIST_CIRCULAR) + { +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Enable EOT interrupt */ + __HAL_SPI_ENABLE_IT(hspi, SPI_IT_EOT); + } + } +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hspi->State != HAL_SPI_STATE_ABORT) + { + if (hspi->hdmarx->Mode == DMA_LINKEDLIST_CIRCULAR) + { +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Enable EOT interrupt */ + __HAL_SPI_ENABLE_IT(hspi, SPI_IT_EOT); + } + } +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hspi->State != HAL_SPI_STATE_ABORT) + { + if ((hspi->hdmarx->Mode == DMA_LINKEDLIST_CIRCULAR) && + (hspi->hdmatx->Mode == DMA_LINKEDLIST_CIRCULAR)) + { +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Enable EOT interrupt */ + __HAL_SPI_ENABLE_IT(hspi, SPI_IT_EOT); + } + } +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) /* Derogation MISRAC2012-Rule-8.13 */ +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-8.13 */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) /* Derogation MISRAC2012-Rule-8.13 */ +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-8.13 */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) /* Derogation MISRAC2012-Rule-8.13 */ +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-8.13 */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* if DMA error is FIFO error ignore it */ + if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_NONE) + { + /* Call SPI standard close procedure */ + SPI_CloseTransfer(hspi); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + hspi->RxXferCount = (uint16_t) 0UL; + hspi->TxXferCount = (uint16_t) 0UL; + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* Call the Abort procedure */ + SPI_AbortTransfer(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* Call the Abort procedure */ + SPI_AbortTransfer(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1UL) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(SPI_HandleTypeDef *hspi) +{ + /* Receive data in 8 Bit mode */ + *((uint8_t *)hspi->pRxBuffPtr) = (*(__IO uint8_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->RxXferCount == 0UL) + { + /* Disable RXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXP); + } +} + + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ +#if defined (__GNUC__) + __IO uint16_t *prxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->RXDR)); + + *((uint16_t *)hspi->pRxBuffPtr) = *prxdr_16bits; +#else + *((uint16_t *)hspi->pRxBuffPtr) = (*(__IO uint16_t *)&hspi->Instance->RXDR); +#endif /* __GNUC__ */ + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->RxXferCount == 0UL) + { + /* Disable RXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXP); + } +} + + +/** + * @brief Manage the 32-bit receive in Interrupt context. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_32BIT(SPI_HandleTypeDef *hspi) +{ + /* Receive data in 32 Bit mode */ + *((uint32_t *)hspi->pRxBuffPtr) = (*(__IO uint32_t *)&hspi->Instance->RXDR); + hspi->pRxBuffPtr += sizeof(uint32_t); + hspi->RxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->RxXferCount == 0UL) + { + /* Disable RXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXP); + } +} + + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 8 Bit mode */ + *(__IO uint8_t *)&hspi->Instance->TXDR = *((const uint8_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint8_t); + hspi->TxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->TxXferCount == 0UL) + { + /* Disable TXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXP); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ +#if defined (__GNUC__) + __IO uint16_t *ptxdr_16bits = (__IO uint16_t *)(&(hspi->Instance->TXDR)); + + *ptxdr_16bits = *((const uint16_t *)hspi->pTxBuffPtr); +#else + *((__IO uint16_t *)&hspi->Instance->TXDR) = *((const uint16_t *)hspi->pTxBuffPtr); +#endif /* __GNUC__ */ + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->TxXferCount == 0UL) + { + /* Disable TXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXP); + } +} + +/** + * @brief Handle the data 32-bit transmit in Interrupt mode. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_32BIT(SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 32 Bit mode */ + *((__IO uint32_t *)&hspi->Instance->TXDR) = *((const uint32_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint32_t); + hspi->TxXferCount--; + + /* Disable IT if no more data excepted */ + if (hspi->TxXferCount == 0UL) + { + /* Disable TXP interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXP); + } +} + +/** + * @brief Abort Transfer and clear flags. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTransfer(SPI_HandleTypeDef *hspi) +{ + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Disable ITs */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_TXP | SPI_IT_RXP | SPI_IT_DXP | SPI_IT_UDR | SPI_IT_OVR | \ + SPI_IT_FRE | SPI_IT_MODF)); + + /* Clear the Status flags in the SR register */ + __HAL_SPI_CLEAR_EOTFLAG(hspi); + __HAL_SPI_CLEAR_TXTFFLAG(hspi); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN); + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_UDRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + __HAL_SPI_CLEAR_SUSPFLAG(hspi); + +#if (USE_SPI_CRC != 0U) + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); +#endif /* USE_SPI_CRC */ + + hspi->TxXferCount = (uint16_t)0UL; + hspi->RxXferCount = (uint16_t)0UL; +} + + +/** + * @brief Close Transfer and clear flags. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL_ERROR: if any error detected + * HAL_OK: if nothing detected + */ +static void SPI_CloseTransfer(SPI_HandleTypeDef *hspi) +{ + uint32_t itflag = hspi->Instance->SR; + + __HAL_SPI_CLEAR_EOTFLAG(hspi); + __HAL_SPI_CLEAR_TXTFFLAG(hspi); + + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Disable ITs */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_EOT | SPI_IT_TXP | SPI_IT_RXP | SPI_IT_DXP | SPI_IT_UDR | SPI_IT_OVR | \ + SPI_IT_FRE | SPI_IT_MODF)); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CFG1, SPI_CFG1_TXDMAEN | SPI_CFG1_RXDMAEN); + + /* Report UnderRun error for non RX Only communication */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + if ((itflag & SPI_FLAG_UDR) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_UDR); + __HAL_SPI_CLEAR_UDRFLAG(hspi); + } + } + + /* Report OverRun error for non TX Only communication */ + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + if ((itflag & SPI_FLAG_OVR) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + +#if (USE_SPI_CRC != 0UL) + /* Check if CRC error occurred */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((itflag & SPI_FLAG_CRCERR) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } + } +#endif /* USE_SPI_CRC */ + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if ((itflag & SPI_FLAG_MODF) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if ((itflag & SPI_FLAG_FRE) != 0UL) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + hspi->TxXferCount = (uint16_t)0UL; + hspi->RxXferCount = (uint16_t)0UL; +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag: SPI flag to check + * @param Status: flag state to check + * @param Timeout: Timeout duration + * @param Tickstart: Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(const SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + /* Wait until flag is set */ + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Compute configured packet size from fifo perspective. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval Packet size occupied in the fifo + */ +static uint32_t SPI_GetPacketSize(const SPI_HandleTypeDef *hspi) +{ + uint32_t fifo_threashold = (hspi->Init.FifoThreshold >> SPI_CFG1_FTHLV_Pos) + 1UL; + uint32_t data_size = (hspi->Init.DataSize >> SPI_CFG1_DSIZE_Pos) + 1UL; + + /* Convert data size to Byte */ + data_size = (data_size + 7UL) / 8UL; + + return data_size * fifo_threashold; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi_ex.c new file mode 100644 index 000000000..549b06509 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_spi_ex.c @@ -0,0 +1,228 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) SPIEx function: + (++) HAL_SPIEx_FlushRxFifo() + (++) HAL_SPIEx_FlushRxFifo() + (++) HAL_SPIEx_EnableLockConfiguration() + (++) HAL_SPIEx_ConfigureUnderrun() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi) +{ + uint8_t count = 0; + uint32_t itflag = hspi->Instance->SR; + __IO uint32_t tmpreg; + + while (((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_RX_FIFO_0PACKET) || ((itflag & SPI_FLAG_RXWNE) != 0UL)) + { + count += (uint8_t)4UL; + tmpreg = hspi->Instance->RXDR; + UNUSED(tmpreg); /* To avoid GCC warning */ + + if (IS_SPI_FULL_INSTANCE(hspi->Instance)) + { + if (count > SPI_HIGHEND_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + else + { + if (count > SPI_LOWEND_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief Enable the Lock for the AF configuration of associated IOs + * and write protect the Content of Configuration register 2 + * when SPI is enabled + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +HAL_StatusTypeDef HAL_SPIEx_EnableLockConfiguration(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Check if the SPI is disabled to edit IOLOCK bit */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_IOLOCK); + } + else + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + SET_BIT(hspi->Instance->CR1, SPI_CR1_IOLOCK); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Configure the UNDERRUN condition and behavior of slave transmitter. + * @param hspi: pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param UnderrunDetection : Detection of underrun condition at slave transmitter + * This parameter is not supported in this SPI version. + * It is kept in order to not break the compatibility. + * @param UnderrunBehaviour : Behavior of slave transmitter at underrun condition + * This parameter can be a value of @ref SPI_Underrun_Behaviour. + * @retval None + */ +HAL_StatusTypeDef HAL_SPIEx_ConfigureUnderrun(SPI_HandleTypeDef *hspi, uint32_t UnderrunDetection, + uint32_t UnderrunBehaviour) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(UnderrunDetection); + + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Check State and Insure that Underrun configuration is managed only by Salve */ + if ((hspi->State != HAL_SPI_STATE_READY) || (hspi->Init.Mode != SPI_MODE_SLAVE)) + { + errorcode = HAL_BUSY; + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; + } + + /* Check the parameters */ + assert_param(IS_SPI_UNDERRUN_BEHAVIOUR(UnderrunBehaviour)); + + /* Check if the SPI is disabled to edit CFG1 register */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Configure Underrun fields */ + MODIFY_REG(hspi->Instance->CFG1, SPI_CFG1_UDRCFG, UnderrunBehaviour); + } + else + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Configure Underrun fields */ + MODIFY_REG(hspi->Instance->CFG1, SPI_CFG1_UDRCFG, UnderrunBehaviour); + + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sram.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sram.c new file mode 100644 index 000000000..b68730152 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_sram.c @@ -0,0 +1,1236 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_sram.c + * @author MCD Application Team + * @brief SRAM HAL module driver. + * This file provides a generic firmware to drive SRAM memories + * mounted as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SRAM memories. It uses the FMC layer functions to interface + with SRAM devices. + The following sequence should be followed to configure the FMC to interface + with SRAM/PSRAM memories: + + (#) Declare a SRAM_HandleTypeDef handle structure, for example: + SRAM_HandleTypeDef hsram; and: + + (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SRAM device + + (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined + base register instance for NOR or SRAM extended mode + + (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended + mode timings; for example: + FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() + (##) Control register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Init() + (##) Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE() + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access + (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/ + HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation + + (#) You can continuously monitor the SRAM device HAL state by calling the function + HAL_SRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_SRAM_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SRAM_Init + and HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SRAM_Init and HAL_SRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SRAM_RegisterCallback before calling HAL_SRAM_DeInit + or HAL_SRAM_Init function. + + When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_SRAM_MODULE_ENABLED + +/** @defgroup SRAM SRAM + * @brief SRAM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ +static void SRAM_DMACplt(DMA_HandleTypeDef *hdma); +static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma); +static void SRAM_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * + @verbatim + ============================================================================== + ##### SRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to initialize/de-initialize + the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SRAM device initialization sequence + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param Timing Pointer to SRAM control timing structure + * @param ExtTiming Pointer to SRAM extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the SRAM handle parameter */ + if (hsram == NULL) + { + return HAL_ERROR; + } + + if (hsram->State == HAL_SRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsram->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspInitCallback == NULL) + { + hsram->MspInitCallback = HAL_SRAM_MspInit; + } + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsram->MspInitCallback(hsram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SRAM_MspInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + } + + /* Initialize SRAM control Interface */ + (void)FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + + /* Initialize SRAM timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + + /* Initialize SRAM extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, + hsram->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + + /* Initialize the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Performs the SRAM device De-initialization sequence. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) +{ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspDeInitCallback == NULL) + { + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsram->MspDeInitCallback(hsram); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_SRAM_MspDeInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + + /* Configure the SRAM registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + + /* Reset the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief SRAM MSP Init. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SRAM MSP DeInit. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 8-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 16-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *pdestbuff = pDstBuffer; + uint8_t limit; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Read data from memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + pdestbuff++; + *pdestbuff = (uint16_t)(((*psramaddress) & 0xFFFF0000U) >> 16U); + pdestbuff++; + psramaddress++; + } + + /* Read last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 16-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *psrcbuff = pSrcBuffer; + uint8_t limit; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Write data to memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *psramaddress = (uint32_t)(*psrcbuff); + psrcbuff++; + *psramaddress |= ((uint32_t)(*psrcbuff) << 16U); + psrcbuff++; + psramaddress++; + } + + /* Write last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *psramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psramaddress) & 0xFFFF0000U); + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 32-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 32-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + HAL_SRAM_StateTypeDef state = hsram->State; + uint32_t size; + uint32_t data_width; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + if (state == HAL_SRAM_STATE_READY) + { + hsram->hdma->XferCpltCallback = SRAM_DMACplt; + } + else + { + hsram->hdma->XferCpltCallback = SRAM_DMACpltProt; + } + hsram->hdma->XferErrorCallback = SRAM_DMAError; + + if ((hsram->hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsram->hdma->LinkedListQueue != 0U) && (hsram->hdma->LinkedListQueue->Head != 0U)) + { + /* Check destination data width and set the size to be transferred */ + data_width = hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + /* Set Source , destination , buffer size */ + /* Set DMA data size */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = size; + /* Set DMA source address */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pAddress; + /* Set DMA destination address */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pDstBuffer; + + /* Enable the DMA Stream */ + status = HAL_DMAEx_List_Start_IT(hsram->hdma); + } + else + { + /* Change SRAM state */ + hsram->State = HAL_SRAM_STATE_READY; + + __HAL_UNLOCK(hsram); + + status = HAL_ERROR; + } + } + else + { + /* Check destination data width and set the size to be transferred */ + data_width = hsram->hdma->Init.DestDataWidth; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, size); + } + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a Words data buffer to SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + uint32_t size; + uint32_t data_width; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hdma->XferCpltCallback = SRAM_DMACplt; + hsram->hdma->XferErrorCallback = SRAM_DMAError; + + if ((hsram->hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hsram->hdma->LinkedListQueue != 0U) && (hsram->hdma->LinkedListQueue->Head != 0U)) + { + /* Check destination data width and set the size to be transferred */ + data_width = hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + /* Set Source , destination , buffer size */ + /* Set DMA data size */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = size; + /* Set DMA source address */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pSrcBuffer; + /* Set DMA destination address */ + hsram->hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pAddress; + /* Enable the DMA Stream */ + status = HAL_DMAEx_List_Start_IT(hsram->hdma); + } + else + { + /* Change SRAM state */ + hsram->State = HAL_SRAM_STATE_READY; + + __HAL_UNLOCK(hsram); + + status = HAL_ERROR; + } + } + else + { + /* Check destination data width and set the size to be transferred */ + data_width = hsram->hdma->Init.DestDataWidth; + + if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + size = (BufferSize * 4U); + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + size = (BufferSize * 2U); + } + else + { + size = (BufferSize); + } + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, size); + } + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SRAM Callback + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = pCallback; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SRAM Callback + * SRAM Callback is redirected to the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (state == HAL_SRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User SRAM Callback for DMA transfers + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = pCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### SRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SRAM controller state + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL state + */ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram) +{ + return hsram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ + +/** + * @brief DMA SRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMACplt(DMA_HandleTypeDef *hdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SRAM process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SRAM error callback. + * @param hdma : DMA handle + * @retval None + */ +static void SRAM_DMAError(DMA_HandleTypeDef *hdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hdma->Parent); + + /* Disable the DMA channel */ + __HAL_DMA_DISABLE(hdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_ERROR; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferErrorCallback(hdma); +#else + HAL_SRAM_DMA_XferErrorCallback(hdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SRAM_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim.c new file mode 100644 index 000000000..5c9394798 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim.c @@ -0,0 +1,8242 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init, HAL_TIM_OC_ConfigChannel and optionally HAL_TIMEx_OC_ConfigPulseOnCompare: + to use the Timer to generate an Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + (+) EncoderIndexCallback : TIM Encoder Index Callback. + (+) DirectionChangeCallback : TIM Direction Change Callback + (+) IndexErrorCallback : TIM Index Error Callback. + (+) TransitionErrorCallback : TIM Transition Error Callback + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + + /* Capture compare 1 event */ + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) + { + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) + { + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) + { + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) + { + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) + { + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) + { + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \ + ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK))) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2)) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) + { + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) + { + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Encoder index event */ + if ((itflag & (TIM_FLAG_IDX)) == (TIM_FLAG_IDX)) + { + if ((itsource & (TIM_IT_IDX)) == (TIM_IT_IDX)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_IDX); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->EncoderIndexCallback(htim); +#else + HAL_TIMEx_EncoderIndexCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Direction change event */ + if ((itflag & (TIM_FLAG_DIR)) == (TIM_FLAG_DIR)) + { + if ((itsource & (TIM_IT_DIR)) == (TIM_IT_DIR)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_DIR); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->DirectionChangeCallback(htim); +#else + HAL_TIMEx_DirectionChangeCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Index error event */ + if ((itflag & (TIM_FLAG_IERR)) == (TIM_FLAG_IERR)) + { + if ((itsource & (TIM_IT_IERR)) == (TIM_IT_IERR)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_IERR); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IndexErrorCallback(htim); +#else + HAL_TIMEx_IndexErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Transition error event */ + if ((itflag & (TIM_FLAG_TERR)) == (TIM_FLAG_TERR)) + { + if ((itsource & (TIM_IT_TERR)) == (TIM_IT_TERR)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TERR); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TransitionErrorCallback(htim); +#else + HAL_TIMEx_TransitionErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_CHANNEL_MODE(sConfig->OCMode, Channel)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_DTR2 + * @arg TIM_DMABASE_ECR + * @arg TIM_DMABASE_TISEL + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_26TRANSFER. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t BlockDataLength = 0; + uint32_t data_width; + const DMA_HandleTypeDef *hdma = NULL; + + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + hdma = htim->hdma[TIM_DMA_ID_UPDATE]; + break; + } + case TIM_DMA_CC1: + { + hdma = htim->hdma[TIM_DMA_ID_CC1]; + break; + } + case TIM_DMA_CC2: + { + hdma = htim->hdma[TIM_DMA_ID_CC2]; + break; + } + case TIM_DMA_CC3: + { + hdma = htim->hdma[TIM_DMA_ID_CC3]; + break; + } + case TIM_DMA_CC4: + { + hdma = htim->hdma[TIM_DMA_ID_CC4]; + break; + } + case TIM_DMA_COM: + { + hdma = htim->hdma[TIM_DMA_ID_COMMUTATION]; + break; + } + case TIM_DMA_TRIGGER: + { + hdma = htim->hdma[TIM_DMA_ID_TRIGGER]; + break; + } + default: + status = HAL_ERROR; + break; + } + + if (hdma != NULL) + { + + if (((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) && (hdma->LinkedListQueue != 0U) + && (hdma->LinkedListQueue->Head != 0U)) + { + data_width = hdma->LinkedListQueue->Head->LinkRegisters[0] & DMA_CTR1_SDW_LOG2; + } + else + { + data_width = hdma->Init.SrcDataWidth; + } + + switch (data_width) + { + case DMA_SRC_DATAWIDTH_BYTE: + { + BlockDataLength = (BurstLength >> TIM_DCR_DBL_Pos) + 1UL; + break; + } + case DMA_SRC_DATAWIDTH_HALFWORD: + { + BlockDataLength = ((BurstLength >> TIM_DCR_DBL_Pos) + 1UL) * 2UL; + break; + } + case DMA_SRC_DATAWIDTH_WORD: + { + BlockDataLength = ((BurstLength >> TIM_DCR_DBL_Pos) + 1UL) * 4UL; + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + BlockDataLength); + } + } + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_DTR2 + * @arg TIM_DMABASE_ECR + * @arg TIM_DMABASE_TISEL + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_26TRANSFER. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpDBSS = 0; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_0; + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_1; + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_1 | TIM_DCR_DBSS_0); + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_2; + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_0); + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_1); + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_1 | TIM_DCR_DBSS_0); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength | tmpDBSS); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_DTR2 + * @arg TIM_DMABASE_ECR + * @arg TIM_DMABASE_TISEL + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_26TRANSFER. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t BlockDataLength = 0; + uint32_t data_width; + const DMA_HandleTypeDef *hdma = NULL; + + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + hdma = htim->hdma[TIM_DMA_ID_UPDATE]; + break; + } + case TIM_DMA_CC1: + { + hdma = htim->hdma[TIM_DMA_ID_CC1]; + break; + } + case TIM_DMA_CC2: + { + hdma = htim->hdma[TIM_DMA_ID_CC2]; + break; + } + case TIM_DMA_CC3: + { + hdma = htim->hdma[TIM_DMA_ID_CC3]; + break; + } + case TIM_DMA_CC4: + { + hdma = htim->hdma[TIM_DMA_ID_CC4]; + break; + } + case TIM_DMA_COM: + { + hdma = htim->hdma[TIM_DMA_ID_COMMUTATION]; + break; + } + case TIM_DMA_TRIGGER: + { + hdma = htim->hdma[TIM_DMA_ID_TRIGGER]; + break; + } + default: + status = HAL_ERROR; + break; + } + + if (hdma != NULL) + { + + if (((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) && (hdma->LinkedListQueue != 0U) + && (hdma->LinkedListQueue->Head != 0U)) + { + data_width = hdma->LinkedListQueue->Head->LinkRegisters[0] & DMA_CTR1_SDW_LOG2; + } + else + { + data_width = hdma->Init.SrcDataWidth; + } + + switch (data_width) + + { + case DMA_SRC_DATAWIDTH_BYTE: + { + BlockDataLength = ((BurstLength) >> TIM_DCR_DBL_Pos) + 1UL; + break; + } + case DMA_SRC_DATAWIDTH_HALFWORD: + { + BlockDataLength = ((BurstLength >> TIM_DCR_DBL_Pos) + 1UL) * 2UL; + break; + } + case DMA_SRC_DATAWIDTH_WORD: + { + BlockDataLength = ((BurstLength >> TIM_DCR_DBL_Pos) + 1UL) * 4UL; + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + BlockDataLength); + } + } + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_DTR2 + * @arg TIM_DMABASE_ECR + * @arg TIM_DMABASE_TISEL + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_26TRANSFER. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpDBSS = 0; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_0; + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_1; + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_1 | TIM_DCR_DBSS_0); + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = TIM_DCR_DBSS_2; + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_0); + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_1); + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Configure the DMA Burst Source Selection */ + tmpDBSS = (TIM_DCR_DBSS_2 | TIM_DCR_DBSS_1 | TIM_DCR_DBSS_0); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength | tmpDBSS); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + case TIM_CLOCKSOURCE_ITR4: + case TIM_CLOCKSOURCE_ITR5: + case TIM_CLOCKSOURCE_ITR6: + case TIM_CLOCKSOURCE_ITR7: + case TIM_CLOCKSOURCE_ITR8: + case TIM_CLOCKSOURCE_ITR9: + case TIM_CLOCKSOURCE_ITR10: + case TIM_CLOCKSOURCE_ITR11: + case TIM_CLOCKSOURCE_ITR13: + case TIM_CLOCKSOURCE_ITR14: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_INSTANCE((htim->Instance), sClockSourceConfig->ClockSource)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1, Reset + Trigger, Gated + Reset). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_INSTANCE(htim->Instance, sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1, Reset + Trigger, Gated + Reset). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_INSTANCE(htim->Instance, sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @brief Start the DMA data transfer. + * @param hdma DMA handle + * @param src : The source memory Buffer address. + * @param dst : The destination memory Buffer address. + * @param length : The size of a source block transfer in byte. + * @retval HAL status + */ +HAL_StatusTypeDef TIM_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t src, uint32_t dst, + uint32_t length) +{ + HAL_StatusTypeDef status ; + + /* Enable the DMA channel */ + if ((hdma->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((hdma->LinkedListQueue != 0U) && (hdma->LinkedListQueue->Head != 0U)) + { + /* Enable the DMA channel */ + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = length; + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = src; + hdma->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = dst; + + status = HAL_DMAEx_List_Start_IT(hdma); + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(hdma, src, dst, length); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + (+) TIM Index callback + (+) TIM Direction change callback + (+) TIM Index error callback + (+) TIM Transition error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @arg @ref HAL_TIM_ENCODER_INDEX_CB_ID Encoder Index Callback ID + * @arg @ref HAL_TIM_DIRECTION_CHANGE_CB_ID Direction Change Callback ID + * @arg @ref HAL_TIM_INDEX_ERROR_CB_ID Index Error Callback ID + * @arg @ref HAL_TIM_TRANSITION_ERROR_CB_ID Transition Error Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + case HAL_TIM_ENCODER_INDEX_CB_ID : + htim->EncoderIndexCallback = pCallback; + break; + + case HAL_TIM_DIRECTION_CHANGE_CB_ID : + htim->DirectionChangeCallback = pCallback; + break; + + case HAL_TIM_INDEX_ERROR_CB_ID : + htim->IndexErrorCallback = pCallback; + break; + + case HAL_TIM_TRANSITION_ERROR_CB_ID : + htim->TransitionErrorCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @arg @ref HAL_TIM_ENCODER_INDEX_CB_ID Encoder Index Callback ID + * @arg @ref HAL_TIM_DIRECTION_CHANGE_CB_ID Direction Change Callback ID + * @arg @ref HAL_TIM_INDEX_ERROR_CB_ID Index Error Callback ID + * @arg @ref HAL_TIM_TRANSITION_ERROR_CB_ID Transition Error Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + case HAL_TIM_ENCODER_INDEX_CB_ID : + /* Legacy weak Encoder Index Callback */ + htim->EncoderIndexCallback = HAL_TIMEx_EncoderIndexCallback; + break; + + case HAL_TIM_DIRECTION_CHANGE_CB_ID : + /* Legacy weak Direction Change Callback */ + htim->DirectionChangeCallback = HAL_TIMEx_DirectionChangeCallback; + break; + + case HAL_TIM_INDEX_ERROR_CB_ID : + /* Legacy weak Index Error Callback */ + htim->IndexErrorCallback = HAL_TIMEx_IndexErrorCallback; + break; + + case HAL_TIM_TRANSITION_ERROR_CB_ID : + /* Legacy weak Transition Error Callback */ + htim->TransitionErrorCallback = HAL_TIMEx_TransitionErrorCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_4)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC4NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 12U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC4NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + /* Reset the Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4N; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if ((sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) || \ + (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_COMBINED_GATEDRESET)) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + case TIM_TS_ITR4: + case TIM_TS_ITR5: + case TIM_TS_ITR6: + case TIM_TS_ITR7: + case TIM_TS_ITR8: + case TIM_TS_ITR9: + case TIM_TS_ITR10: + case TIM_TS_ITR11: + case TIM_TS_ITR13: + case TIM_TS_ITR14: + { + /* Check the parameter */ + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_INSTANCE((htim->Instance), sSlaveConfig->InputTrigger)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_CLOCKSOURCE_ITR3: Internal Trigger 3 + * @arg TIM_CLOCKSOURCE_ITR4: Internal Trigger 4 + * @arg TIM_CLOCKSOURCE_ITR5: Internal Trigger 5 + * @arg TIM_CLOCKSOURCE_ITR6: Internal Trigger 6 + * @arg TIM_CLOCKSOURCE_ITR7: Internal Trigger 7 + * @arg TIM_CLOCKSOURCE_ITR8: Internal Trigger 8 + * @arg TIM_CLOCKSOURCE_ITR9: Internal Trigger 9 + * @arg TIM_CLOCKSOURCE_ITR10: Internal Trigger 10 + * @arg TIM_CLOCKSOURCE_ITR11: Internal Trigger 11 + * @arg TIM_CLOCKSOURCE_ITR13: Internal Trigger 13 + * @arg TIM_CLOCKSOURCE_ITR14: Internal Trigger 14 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; + htim->EncoderIndexCallback = HAL_TIMEx_EncoderIndexCallback; + htim->DirectionChangeCallback = HAL_TIMEx_DirectionChangeCallback; + htim->IndexErrorCallback = HAL_TIMEx_IndexErrorCallback; + htim->TransitionErrorCallback = HAL_TIMEx_TransitionErrorCallback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim_ex.c new file mode 100644 index 000000000..2acba6ba2 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_tim_ex.c @@ -0,0 +1,3351 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Timer remapping capabilities configuration + * + Timer encoder index configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + (#) In case of Pulse on compare, configure pulse length and delay + (#) Encoder index configuration + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + (#) In case of Pulse On Compare: + (++) HAL_TIMEx_OC_ConfigPulseOnCompare(): to configure pulse width and prescaler + + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + case TIM_CHANNEL_4: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (TIM_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + (+) Configure Pulse on compare. + (+) Configure Encoder index. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR4: Internal trigger 4 selected + * @arg TIM_TS_ITR5: Internal trigger 5 selected + * @arg TIM_TS_ITR6: Internal trigger 6 selected + * @arg TIM_TS_ITR7: Internal trigger 7 selected + * @arg TIM_TS_ITR8: Internal trigger 8 selected + * @arg TIM_TS_ITR9: Internal trigger 9 selected + * @arg TIM_TS_ITR10: Internal trigger 10 selected + * @arg TIM_TS_ITR11: Internal trigger 11 selected + * @arg TIM_TS_ITR13: Internal trigger 13 selected + * @arg TIM_TS_ITR14: Internal trigger 14 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_INSTANCE(htim->Instance, InputTrigger)); + + __HAL_LOCK(htim); + + if (CommutationSource == TIM_COMMUTATION_TRGI) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR4: Internal trigger 4 selected + * @arg TIM_TS_ITR5: Internal trigger 5 selected + * @arg TIM_TS_ITR6: Internal trigger 6 selected + * @arg TIM_TS_ITR7: Internal trigger 7 selected + * @arg TIM_TS_ITR8: Internal trigger 8 selected + * @arg TIM_TS_ITR9: Internal trigger 9 selected + * @arg TIM_TS_ITR10: Internal trigger 10 selected + * @arg TIM_TS_ITR11: Internal trigger 11 selected + * @arg TIM_TS_ITR13: Internal trigger 13 selected + * @arg TIM_TS_ITR14: Internal trigger 14 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_INSTANCE(htim->Instance, InputTrigger)); + + __HAL_LOCK(htim); + + if (CommutationSource == TIM_COMMUTATION_TRGI) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR4: Internal trigger 4 selected + * @arg TIM_TS_ITR5: Internal trigger 5 selected + * @arg TIM_TS_ITR6: Internal trigger 6 selected + * @arg TIM_TS_ITR7: Internal trigger 7 selected + * @arg TIM_TS_ITR8: Internal trigger 8 selected + * @arg TIM_TS_ITR9: Internal trigger 9 selected + * @arg TIM_TS_ITR10: Internal trigger 10 selected + * @arg TIM_TS_ITR11: Internal trigger 11 selected + * @arg TIM_TS_ITR13: Internal trigger 13 selected + * @arg TIM_TS_ITR14: Internal trigger 14 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_INSTANCE(htim->Instance, InputTrigger)); + + __HAL_LOCK(htim); + + if (CommutationSource == TIM_COMMUTATION_TRGI) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM_AF1_BKINE; + bkin_enable_bitpos = TIM_AF1_BKINE_Pos; + bkin_polarity_mask = TIM_AF1_BKINP; + bkin_polarity_bitpos = TIM_AF1_BKINP_Pos; + break; + } + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter can take one of the following values: + * @arg TIM_TIM1_ETR_GPIO TIM1 ETR is connected to GPIO + * @arg TIM_TIM1_ETR_ADC1_AWD1 TIM1 ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2 TIM1 ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3 TIM1 ETR is connected to ADC1 AWD3 + * @arg TIM_TIM1_ETR_ADC2_AWD1 TIM1 ETR is connected to ADC2 AWD1 + * @arg TIM_TIM1_ETR_ADC2_AWD2 TIM1 ETR is connected to ADC2 AWD2 + * @arg TIM_TIM1_ETR_ADC2_AWD3 TIM1 ETR is connected to ADC2 AWD3 + * + * For TIM2, the parameter can take one of the following values: + * @arg TIM_TIM2_ETR_GPIO TIM2 ETR is connected to GPIO + * @arg TIM_TIM2_ETR_DCMIPP_HSYNC TIM2 ETR is connected to DCMIPP HSYNC pin + * @arg TIM_TIM2_ETR_LTDC_HSYNC TIM2 ETR is connected to LTDC HSYNC pin + * @arg TIM_TIM2_ETR_SAI1_FSA TIM2_ETR is connected to SAI1 FS_A + * @arg TIM_TIM2_ETR_SAI1_FSB TIM2_ETR is connected to SAI1 FS_B + * @arg TIM_TIM2_ETR_GFXTIM_TE TIM2_ETR is connected to GFXTIM TE + * @arg TIM_TIM2_ETR_DCMIPP_HSYNC TIM2 ETR is connected to DCMIPP HSYNC pin + * @arg TIM_TIM2_ETR_LTDC_HSYNC TIM2 ETR is connected to LTDC HSYNC pin + * @arg TIM_TIM3_ETR_TIM3_ETR TIM3_ETR is connected to TIM3 ETR + * @arg TIM_TIM3_ETR_TIM4_ETR TIM3_ETR is connected to TIM4 ETR + * @arg TIM_TIM3_ETR_TIM5_ETR TIM3_ETR is connected to TIM5 ETR + * @arg TIM_TIM2_ETR_ETH_PPS TIM2_ETR is connected to ETH PPS + * + * For TIM3, the parameter can take one of the following values: + * @arg TIM_TIM3_ETR_GPIO TIM3_ETR is not connected to I/O + * @arg TIM_TIM3_ETR_DCMIPP_HSYNC TIM3_ETR is connected to DCMIPP HSYNC + * @arg TIM_TIM3_ETR_LTDC_HSYNC TIM3_ETR is connected to LTDC HSYNC + * @arg TIM_TIM3_ETR_GFXTIM_TE TIM3_ETR is connected to GFXTIM TE + * @arg TIM_TIM3_ETR_DCMIPP_HSYNC TIM3_ETR is connected to DCMIPP VSYNC + * @arg TIM_TIM3_ETR_LTDC_VSYNC TIM3_ETR is connected to LTDC VSYNC + * @arg TIM_TIM3_ETR_TIM2_ETR TIM3_ETR is connected to TIM2 ETR + * @arg TIM_TIM3_ETR_TIM4_ETR TIM3_ETR is connected to TIM4 ETR + * @arg TIM_TIM3_ETR_TIM5_ETR TIM3_ETR is connected to TIM5 ETR + * @arg TIM_TIM3_ETR_ETH_PPS TIM3_ETR is connected to ETH PPS + * + * For TIM4, the parameter can take one of the following values: + * @arg TIM_TIM4_ETR_GPIO TIM4 ETR is connected to GPIO + * @arg TIM_TIM4_ETR_DCMIPP_HSYNC TIM4_ETR is connected to DCMIPP HSYNC + * @arg TIM_TIM4_ETR_LTDC_HSYNC TIM4_ETR is connected to LTDC HSYNC + * @arg TIM_TIM4_ETR_GFXTIM_TE TIM4_ETR is connected to GFXTIM TE + * @arg TIM_TIM4_ETR_DCMIPP_HSYNC TIM4_ETR is connected to DCMIPP VSYNC + * @arg TIM_TIM4_ETR_LTDC_VSYNC TIM4_ETR is connected to LTDC VSYNC + * @arg TIM_TIM4_ETR_TIM2_ETR TIM4_ETR is connected to TIM2 ETR + * @arg TIM_TIM4_ETR_TIM3_ETR TIM4_ETR is connected to TIM3 ETR + * @arg TIM_TIM4_ETR_TIM5_ETR TIM4_ETR is connected to TIM5 ETR + * @arg TIM_TIM4_ETR_ETH1_PPS TIM4_ETR is connected to ETH1 PPS + * + * For TIM5, the parameter can take one of the following values: + * @arg TIM_TIM5_ETR_GPIO TIM5 ETR is connected to GPIO + * @arg TIM_TIM5_ETR_SAI2_FSA TIM5_ETR is connected to SAI2 FS_A + * @arg TIM_TIM5_ETR_SAI2_FSB TIM5_ETR is connected to SAI2 FS_B + * @arg TIM_TIM5_ETR_DCMIPP_HSYNC TIM5_ETR is connected to DCMIPP HSYNC + * @arg TIM_TIM5_ETR_LTDC_HSYNC TIM5_ETR is connected to LTDC HSYNC + * @arg TIM_TIM5_ETR_GFXTIM_TE TIM5_ETR is connected to GFXTIM TE + * @arg TIM_TIM5_ETR_DCMIPP_HSYNC TIM5_ETR is connected to DCMIPP VSYNC + * @arg TIM_TIM5_ETR_LTDC_VSYNC TIM5_ETR is connected to LTDC VSYNC + * @arg TIM_TIM5_ETR_TIM2_ETR TIM5_ETR is connected to TIM2 ETR + * @arg TIM_TIM5_ETR_TIM3_ETR TIM5_ETR is connected to TIM3 ETR + * @arg TIM_TIM5_ETR_TIM3_ETR TIM5_ETR is connected to TIM4 ETR + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @param TISelection parameter of the TIM_TISelectionStruct structure is detailed as follows: + * For TIM2, the parameter is one of the following values: + * @arg TIM_TIM2_TI1_GPIO: TIM2 TI1 is connected to GPIO + * @arg TIM_TIM2_TI1_ETH_PPS: TIM2 TI1 is connected to ETH PPS + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_ETH_PPS: TIM3 TI1 is connected to ETH PPS + * + * For TIM9, the parameter is one of the following values: + * @arg TIM_TIM9_TI1_GPIO: TIM9 TI1 is connected to GPIO + * @arg TIM_TIM9_TI1_MCO1: TIM9 TI1 is connected to MCO1 + * @arg TIM_TIM9_TI1_MCO2: TIM9 TI1 is connected to MCO2 + * + * For TIM12, the parameter is one of the following values: + * @arg TIM_TIM12_TI1_GPIO: TIM12 TI1 is connected to GPIO + * @arg TIM_TIM12_TI1_SPDIF_FS: TIM12 TI1 is connected to SPDIF FS + * @arg TIM_TIM12_TI1_HSI_1024: TIM12 TI1 is connected to HSI/1024 + * @arg TIM_TIM12_TI1_CSI_128: TIM12_TI1 is connected to CSI/128 + * @arg TIM_TIM12_TI1_MCO1: TIM12 TI1 is connected to MCO1 + * @arg TIM_TIM12_TI1_MCO2: TIM12 TI1 is connected to MCO2 + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2_CH1: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3_CH1: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI1_TIM4_CH1: TIM15 TI1 is connected to TIM4 CH1 + * @arg TIM_TIM15_TI1_MCO1: TIM15 TI1 is connected to MCO1 + * @arg TIM_TIM15_TI1_MCO2: TIM15 TI1 is connected to MCO2 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2_CH2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3_CH2: TIM15 TI2 is connected to TIM3 CH2 + * @arg TIM_TIM15_TI2_TIM4_CH2: TIM15 TI2 is connected to TIM4 CH2 + * + * For TIM16, the parameter is one of the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_RTC_WKUP: TIM16 TI1 is connected to RTC wakeup interrupt + * + * For TIM17, the parameter is one of the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM17_TI1_SPDIF_FS: TIM17 TI1 is connected to SPDIF FS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_TIX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Enable dithering + * @param htim TIM handle + * @note Main usage is PWM mode + * @note This function must be called when timer is stopped or disabled (CEN =0) + * @note If dithering is activated, pay attention to ARR, CCRx, CNT interpretation: + * - CNT: only CNT[11:0] holds the non-dithered part for 16b timers (or CNT[26:0] for 32b timers) + * - ARR: ARR[15:4] holds the non-dithered part, and ARR[3:0] the dither part for 16b timers + * - CCRx: CCRx[15:4] holds the non-dithered part, and CCRx[3:0] the dither part for 16b timers + * - ARR and CCRx values are limited to 0xFFEF in dithering mode for 16b timers + * (corresponds to 4094 for the integer part and 15 for the dithered part). + * @note Macros @ref __HAL_TIM_CALC_PERIOD_DITHER() __HAL_TIM_CALC_DELAY_DITHER() __HAL_TIM_CALC_PULSE_DITHER() + * can be used to calculate period (ARR) and delay (CCRx) value. + * @note Enabling dithering, modifies automatically values of registers ARR/CCRx to keep the same integer part. + * @note Enabling dithering, modifies automatically values of registers ARR/CCRx to keep the same integer part. + * So it may be necessary to read ARR value or CCRx value with macros @ref __HAL_TIM_GET_AUTORELOAD() + * __HAL_TIM_GET_COMPARE() and if necessary update Init structure field htim->Init.Period . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DitheringEnable(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->CR1, TIM_CR1_DITHEN); + return HAL_OK; +} + +/** + * @brief Disable dithering + * @param htim TIM handle + * @note This function must be called when timer is stopped or disabled (CEN =0) + * @note If dithering is activated, pay attention to ARR, CCRx, CNT interpretation: + * - CNT: only CNT[11:0] holds the non-dithered part for 16b timers (or CNT[26:0] for 32b timers) + * - ARR: ARR[15:4] holds the non-dithered part, and ARR[3:0] the dither part for 16b timers + * - CCRx: CCRx[15:4] holds the non-dithered part, and CCRx[3:0] the dither part for 16b timers + * - ARR and CCRx values are limited to 0xFFEF in dithering mode + * (corresponds to 4094 for the integer part and 15 for the dithered part). + * @note Disabling dithering, modifies automatically values of registers ARR/CCRx to keep the same integer part. + * So it may be necessary to read ARR value or CCRx value with macros @ref __HAL_TIM_GET_AUTORELOAD() + * __HAL_TIM_GET_COMPARE() and if necessary update Init structure field htim->Init.Period . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DitheringDisable(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->CR1, TIM_CR1_DITHEN); + return HAL_OK; +} + +/** + * @brief Initializes the pulse on compare pulse width and pulse prescaler + * @param htim TIM Output Compare handle + * @param PulseWidthPrescaler Pulse width prescaler + * This parameter can be a number between Min_Data = 0x0 and Max_Data = 0x7 + * @param PulseWidth Pulse width + * This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OC_ConfigPulseOnCompare(TIM_HandleTypeDef *htim, + uint32_t PulseWidthPrescaler, + uint32_t PulseWidth) +{ + uint32_t tmpecr; + + /* Check the parameters */ + assert_param(IS_TIM_PULSEONCOMPARE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_PULSEONCOMPARE_WIDTH(PulseWidth)); + assert_param(IS_TIM_PULSEONCOMPARE_WIDTHPRESCALER(PulseWidthPrescaler)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx ECR register value */ + tmpecr = htim->Instance->ECR; + /* Reset the Pulse width prescaler and the Pulse width */ + tmpecr &= ~(TIM_ECR_PWPRSC | TIM_ECR_PW); + /* Set the Pulse width prescaler and Pulse width*/ + tmpecr |= PulseWidthPrescaler << TIM_ECR_PWPRSC_Pos; + tmpecr |= PulseWidth << TIM_ECR_PW_Pos; + /* Write to TIMx ECR */ + htim->Instance->ECR = tmpecr; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure preload source of Slave Mode Selection bitfield (SMS in SMCR register) + * @param htim TIM handle + * @param Source Source of slave mode selection preload + * This parameter can be one of the following values: + * @arg TIM_SMS_PRELOAD_SOURCE_UPDATE: Timer update event is used as source of Slave Mode Selection preload + * @arg TIM_SMS_PRELOAD_SOURCE_INDEX: Timer index event is used as source of Slave Mode Selection preload + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigSlaveModePreload(TIM_HandleTypeDef *htim, uint32_t Source) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_PRELOAD_SOURCE(Source)); + + MODIFY_REG(htim->Instance->SMCR, TIM_SMCR_SMSPS, Source); + return HAL_OK; +} + +/** + * @brief Enable preload of Slave Mode Selection bitfield (SMS in SMCR register) + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_EnableSlaveModePreload(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->SMCR, TIM_SMCR_SMSPE); + return HAL_OK; +} + +/** + * @brief Disable preload of Slave Mode Selection bitfield (SMS in SMCR register) + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisableSlaveModePreload(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_SMSPE); + return HAL_OK; +} + +/** + * @brief Enable deadtime preload + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_EnableDeadTimePreload(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->DTR2, TIM_DTR2_DTPE); + return HAL_OK; +} + +/** + * @brief Disable deadtime preload + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisableDeadTimePreload(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->DTR2, TIM_DTR2_DTPE); + return HAL_OK; +} + +/** + * @brief Configure deadtime + * @param htim TIM handle + * @param Deadtime Deadtime value + * @note This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigDeadTime(TIM_HandleTypeDef *htim, uint32_t Deadtime) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DEADTIME(Deadtime)); + + MODIFY_REG(htim->Instance->BDTR, TIM_BDTR_DTG, Deadtime); + return HAL_OK; +} + +/** + * @brief Configure asymmetrical deadtime + * @param htim TIM handle + * @param FallingDeadtime Falling edge deadtime value + * @note This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigAsymmetricalDeadTime(TIM_HandleTypeDef *htim, uint32_t FallingDeadtime) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DEADTIME(FallingDeadtime)); + + MODIFY_REG(htim->Instance->DTR2, TIM_DTR2_DTGF, FallingDeadtime); + return HAL_OK; +} + +/** + * @brief Enable asymmetrical deadtime + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_EnableAsymmetricalDeadTime(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->DTR2, TIM_DTR2_DTAE); + return HAL_OK; +} + +/** + * @brief Disable asymmetrical deadtime + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisableAsymmetricalDeadTime(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->DTR2, TIM_DTR2_DTAE); + return HAL_OK; +} + +/** + * @brief Configures the encoder index. + * @note warning in case of encoder mode clock plus direction + * @ref TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X1 or @ref TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X2 + * Direction must be set to @ref TIM_ENCODERINDEX_DIRECTION_UP_DOWN + * @param htim TIM handle. + * @param sEncoderIndexConfig Encoder index configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigEncoderIndex(TIM_HandleTypeDef *htim, + TIMEx_EncoderIndexConfigTypeDef *sEncoderIndexConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODERINDEX_POLARITY(sEncoderIndexConfig->Polarity)); + assert_param(IS_TIM_ENCODERINDEX_PRESCALER(sEncoderIndexConfig->Prescaler)); + assert_param(IS_TIM_ENCODERINDEX_FILTER(sEncoderIndexConfig->Filter)); + assert_param(IS_TIM_ENCODERINDEX_BLANKING(sEncoderIndexConfig->Blanking)); + assert_param(IS_FUNCTIONAL_STATE(sEncoderIndexConfig->FirstIndexEnable)); + assert_param(IS_TIM_ENCODERINDEX_POSITION(sEncoderIndexConfig->Position)); + assert_param(IS_TIM_ENCODERINDEX_DIRECTION(sEncoderIndexConfig->Direction)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Configures the TIMx External Trigger (ETR) which is used as Index input */ + TIM_ETR_SetConfig(htim->Instance, + sEncoderIndexConfig->Prescaler, + sEncoderIndexConfig->Polarity, + sEncoderIndexConfig->Filter); + + /* Configures the encoder index */ + MODIFY_REG(htim->Instance->ECR, + TIM_ECR_IDIR_Msk | TIM_ECR_IBLK_Msk | TIM_ECR_FIDX_Msk | TIM_ECR_IPOS_Msk, + (sEncoderIndexConfig->Direction | + (sEncoderIndexConfig->Blanking) | + ((sEncoderIndexConfig->FirstIndexEnable == ENABLE) ? (0x1U << TIM_ECR_FIDX_Pos) : 0U) | + sEncoderIndexConfig->Position | + TIM_ECR_IE)); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Enable encoder index + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_EnableEncoderIndex(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->ECR, TIM_ECR_IE); + return HAL_OK; +} + +/** + * @brief Disable encoder index + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisableEncoderIndex(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->ECR, TIM_ECR_IE); + return HAL_OK; +} + +/** + * @brief Enable encoder first index + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_EnableEncoderFirstIndex(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + SET_BIT(htim->Instance->ECR, TIM_ECR_FIDX); + return HAL_OK; +} + +/** + * @brief Disable encoder first index + * @param htim TIM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisableEncoderFirstIndex(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + CLEAR_BIT(htim->Instance->ECR, TIM_ECR_FIDX); + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Commutation callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Commutation half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} + +/** + * @brief Encoder index callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_EncoderIndexCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_EncoderIndexCallback could be implemented in the user file + */ +} + +/** + * @brief Direction change callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_DirectionChangeCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_DirectionChangeCallback could be implemented in the user file + */ +} + +/** + * @brief Index error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_IndexErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_IndexErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Transition error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_TransitionErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_TransitionErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_rtc_wakeup_template.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_rtc_wakeup_template.c new file mode 100644 index 000000000..03103b4f4 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_rtc_wakeup_template.c @@ -0,0 +1,275 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_timebase_rtc_wakeup_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_WAKEUP Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * to use the RTC WAKEUP for the time base generation: + * + Initializes the RTC peripheral and configures the wakeup timer to be + * incremented each 1ms + * + The wakeup feature is configured to assert an interrupt each 1ms + * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback + * + HSE (default), LSE or LSI can be selected as RTC clock source + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32h7rsxx_hal_timebase_rtc_wakeup.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32h7rsxx_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can not be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32h7rsxx_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +#define RTC_CLOCK_SOURCE_HSE +/* #define RTC_CLOCK_SOURCE_LSE */ +/* #define RTC_CLOCK_SOURCE_LSI */ + +/* The time base should be 1ms + Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + HSE as RTC clock + Time base = ((99 + 1) * (4 + 1)) / 500kHz + = 1ms + LSE as RTC clock + Time base = ((32 + 1) * (0 + 1)) / 32.768kHz + = ~1ms + LSI as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32kHz + = 1ms +*/ +#if defined (RTC_CLOCK_SOURCE_HSE) +#define RTC_ASYNCH_PREDIV 99U +#define RTC_SYNCH_PREDIV 4U +#elif defined (RTC_CLOCK_SOURCE_LSE) +#define RTC_ASYNCH_PREDIV 0U +#define RTC_SYNCH_PREDIV 32U +#elif defined (RTC_CLOCK_SOURCE_LSI) +#define RTC_ASYNCH_PREDIV 0U +#define RTC_SYNCH_PREDIV 31U +#else +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_HSE */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static RTC_HandleTypeDef hRTC_Handle; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_IRQHandler(void); +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1U) +void TimeBase_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC wakeup timer as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef Status; + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /* Disable bkup domain protection */ + HAL_PWR_EnableBkUpAccess(); + + /* Force and Release the Backup domain reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + + /* Enable RTC Clock */ + __HAL_RCC_RTC_ENABLE(); + __HAL_RCC_RTCAPB_CLK_ENABLE(); + +#if defined (RTC_CLOCK_SOURCE_LSE) + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* Configure HSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE; + RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV48; +#else +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_LSE */ + + Status = HAL_RCC_OscConfig(&RCC_OscInitStruct); + + if (Status == HAL_OK) + { + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + Status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + } + + if (Status == HAL_OK) + { + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + hRTC_Handle.Init.BinMode = RTC_BINARY_NONE; + + Status = HAL_RTC_Init(&hRTC_Handle); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1U) + HAL_RTC_RegisterCallback(&hRTC_Handle, HAL_RTC_WAKEUPTIMER_EVENT_CB_ID, TimeBase_RTCEx_WakeUpTimerEventCallback); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + if (Status == HAL_OK) + { + uint32_t WakeUpCounter = ((uint32_t)uwTickFreq / (uint32_t)HAL_TICK_FREQ_1KHZ) - 1U; + Status = HAL_RTCEx_SetWakeUpTimer_IT(&hRTC_Handle, WakeUpCounter, RTC_WAKEUPCLOCK_CK_SPRE_16BITS, 0); + } + + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + /* Enable the RTC global Interrupt */ + HAL_NVIC_SetPriority(RTC_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + Status = HAL_ERROR; + } + + HAL_NVIC_EnableIRQ(RTC_IRQn); + + return Status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC_WKUP interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable RTC WAKE UP TIMER Interrupt */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by enabling RTC_WKUP interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable RTC WAKE UP TIMER interrupt */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Wake Up Timer Event Callback in non blocking mode + * @note This function is called when RTC_WKUP interrupt took place, inside + * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc RTC handle + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1U) +void TimeBase_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +#else +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +#endif +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + HAL_IncTick(); +} + +/** + * @brief This function handles RTC WAKE UP TIMER interrupt request. + * @retval None + */ +void RTC_IRQHandler(void) +{ + HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_tim_template.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_tim_template.c new file mode 100644 index 000000000..b876b4812 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_timebase_tim_template.c @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_timebase_tim_template.c + * @author MCD Application Team + * @brief Template for HAL time base based on the peripheral hardware TIM6. + * + * This file override the native HAL time base functions (defined as weak) + * the TIM time base: + * + Initializes the TIM6 peripheral to generate a Period elapsed Event each 1ms + * + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32h7rsxx_hal_timebase_tim.c' + (#) Add this file and the TIM HAL driver files to your project and make sure + HAL_TIM_MODULE_ENABLED is defined in stm32h7rsxx_hal_conf.h + + [..] + (@) The application needs to ensure that the time base is always set to 1 millisecond + to have correct HAL operation. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL_TimeBase + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define TIM_CNT_FREQ 500000U /* Timer counter frequency : 500 kHz */ +#define TIM_FREQ 1000U /* Timer frequency : 1 kHz => to have 1 ms interrupt */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static TIM_HandleTypeDef TimHandle; + +/* Private function prototypes -----------------------------------------------*/ +void TIM6_IRQHandler(void); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1U) +void TimeBase_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the TIM6 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + RCC_ClkInitTypeDef clkconfig; + uint32_t uwTimclock; + uint32_t uwAPB1Prescaler; + uint32_t uwPrescalerValue; + uint32_t pFLatency; + HAL_StatusTypeDef Status; + + /* Enable TIM6 clock */ + __HAL_RCC_TIM6_CLK_ENABLE(); + + /* Get clock configuration */ + HAL_RCC_GetClockConfig(&clkconfig, &pFLatency); + + /* Get APB1 prescaler */ + uwAPB1Prescaler = clkconfig.APB1CLKDivider; + + /* Compute TIM6 clock */ + if (uwAPB1Prescaler == RCC_APB1_DIV1) + { + uwTimclock = HAL_RCC_GetPCLK1Freq(); + } + else if (uwAPB1Prescaler == RCC_APB1_DIV2) + { + uwTimclock = 2UL * HAL_RCC_GetPCLK1Freq(); + } + else + { + if (__HAL_RCC_GET_TIMCLKPRESCALER() == RCC_TIMPRES_DISABLE) + { + uwTimclock = 2UL * HAL_RCC_GetPCLK1Freq(); + } + else + { + uwTimclock = 4UL * HAL_RCC_GetPCLK1Freq(); + } + } + + /* Compute the prescaler value to have TIM6 counter clock equal to TIM_CNT_FREQ */ + uwPrescalerValue = (uint32_t)((uwTimclock / TIM_CNT_FREQ) - 1U); + + /* Initialize TIM6 */ + TimHandle.Instance = TIM6; + + /* Initialize TIMx peripheral as follow: + + Period = [uwTickFreq * (TIM_CNT_FREQ/TIM_FREQ) - 1]. to have a (uwTickFreq/TIM_FREQ) s time base. + + Prescaler = (uwTimclock/TIM_CNT_FREQ - 1) to have a TIM_CNT_FREQ counter clock. + + ClockDivision = 0 + + Counter direction = Up + */ + TimHandle.Init.Period = ((uint32_t)uwTickFreq * (TIM_CNT_FREQ / TIM_FREQ)) - 1U; + TimHandle.Init.Prescaler = uwPrescalerValue; + TimHandle.Init.ClockDivision = 0; + TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + Status = HAL_TIM_Base_Init(&TimHandle); + if (Status == HAL_OK) + { + /* Start the TIM time Base generation in interrupt mode */ + Status = HAL_TIM_Base_Start_IT(&TimHandle); + if (Status == HAL_OK) + { + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + /* Configure the TIM6 global Interrupt priority */ + HAL_NVIC_SetPriority(TIM6_IRQn, TickPriority, 0); + + /* Enable the TIM6 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM6_IRQn); + + uwTickPrio = TickPriority; + } + else + { + Status = HAL_ERROR; + } + } + } +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1U) + HAL_TIM_RegisterCallback(&TimHandle, HAL_TIM_PERIOD_ELAPSED_CB_ID, TimeBase_TIM_PeriodElapsedCallback); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Return function status */ + return Status; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling TIM6 update interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable TIM6 update interrupt */ + __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by enabling TIM6 update interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Enable TIM6 update interrupt */ + __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM6 interrupt took place, inside + * HAL_TIM6_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim TIM handle + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1U) +void TimeBase_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +#else +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + HAL_IncTick(); +} + +/** + * @brief This function handles TIM6 interrupt request. + * @retval None + */ +void TIM6_IRQHandler(void) +{ + HAL_TIM_IRQHandler(&TimHandle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart.c new file mode 100644 index 000000000..036b840fb --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart.c @@ -0,0 +1,4867 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +#if defined(HAL_DMA_MODULE_ENABLED) +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + uint16_t nbByte = Size; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size * 2 */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + if ((huart->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((huart->hdmatx->LinkedListQueue != NULL) && (huart->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + huart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + huart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)huart->pTxBuffPtr; + + /* Set DMA destination address */ + huart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&huart->Instance->TDR; + + /* Enable the UART transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(huart->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the UART transmit DMA channel */ + status = HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, nbByte); + } + + if (status != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Suspend the UART DMA Tx channel : use blocking DMA Suspend API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Suspend callback to Null. + No call back execution at end of DMA Suspend procedure */ + huart->hdmatx->XferSuspendCallback = NULL; + + if (HAL_DMAEx_Suspend(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Suspend the UART DMA Rx channel : use blocking DMA Suspend API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Set the UART DMA Suspend callback to Null. + No call back execution at end of DMA Suspend procedure */ + huart->hdmarx->XferSuspendCallback = NULL; + + if (HAL_DMAEx_Suspend(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Resume the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMAEx_Resume(huart->hdmatx) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_ERROR; + } + } + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Resume the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMAEx_Resume(huart->hdmarx) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_ERROR; + } + } + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (huart->hdmarx->Mode != DMA_LINKEDLIST_CIRCULAR) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + else + { +#endif /* HAL_DMA_MODULE_ENABLED */ + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; +#if defined(HAL_DMA_MODULE_ENABLED) + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + break; + case UART_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + break; + case UART_CLOCKSOURCE_PCLK4: + pclk = HAL_RCC_GetPCLK4Freq(); + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + break; + case UART_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + break; + case UART_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + uint16_t nbByte = Size; + + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size * 2 */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + if ((huart->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((huart->hdmarx->LinkedListQueue != NULL) && (huart->hdmarx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + huart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + huart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&huart->Instance->RDR; + + /* Set DMA destination address */ + huart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)huart->pRxBuffPtr; + + /* Enable the UART receive DMA channel */ + status = HAL_DMAEx_List_Start_IT(huart->hdmarx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the UART receive DMA channel */ + status = HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, nbByte); + } + + if (status != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check if DMA in circular mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check if DMA in circular mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart_ex.c new file mode 100644 index 000000000..d6422ceaf --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_uart_ex.c @@ -0,0 +1,1044 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 16U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 16U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart.c new file mode 100644 index 000000000..6efce4287 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart.c @@ -0,0 +1,3959 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_usart.c + * @author MCD Application Team + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter + * Peripheral (USART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart). + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure these USART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) USART interrupts handling: + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode + (Receiver/Transmitter) in the husart handle Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_USART_MspInit(&husart) API. + + [..] + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and + HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_USART_RegisterCallback() to register a user callback. + Function HAL_USART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_USART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + + [..] + By default, after the HAL_USART_Init() and when the state is HAL_USART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_USART_TxCpltCallback(), HAL_USART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_USART_Init() + and HAL_USART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_USART_Init() and HAL_USART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_USART_RegisterCallback() before calling HAL_USART_DeInit() + or HAL_USART_Init() function. + + [..] + When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */ +#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 | \ + USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by USART_SetConfig API */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | \ + USART_CR2_LBCL | USART_CR2_STOP | USART_CR2_SLVEN | \ + USART_CR2_DIS_NSS)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART or USART CR3 fields of parameters set by USART_SetConfig API */ + +#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */ +#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions + * @{ + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +static void USART_EndTransfer(USART_HandleTypeDef *husart); +#if defined(HAL_DMA_MODULE_ENABLED) +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous configuration + procedure (details for the procedure are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible USART formats are listed in the + following table. + + Table 1. USART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | USART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the USART mode according to the specified + * parameters in the USART_InitTypeDef and initialize the associated handle. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if (husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + USART_InitCallbacksToDefault(husart); + + if (husart->MspInitCallback == NULL) + { + husart->MspInitCallback = HAL_USART_MspInit; + } + + /* Init the low level hardware */ + husart->MspInitCallback(husart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_USART_MspInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* Set the Usart Communication parameters */ + if (USART_SetConfig(husart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register. + */ + husart->Instance->CR2 &= ~USART_CR2_LINEN; + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN); + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* TEACK and/or REACK to check before moving husart->State to Ready */ + return (USART_CheckIdleState(husart)); +} + +/** + * @brief DeInitialize the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + husart->Instance->CR1 = 0x0U; + husart->Instance->CR2 = 0x0U; + husart->Instance->CR3 = 0x0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + if (husart->MspDeInitCallback == NULL) + { + husart->MspDeInitCallback = HAL_USART_MspDeInit; + } + /* DeInit the low level hardware */ + husart->MspDeInitCallback(husart); +#else + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Initialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User USART Callback + * To be used to override the weak predefined callback + * @note The HAL_USART_RegisterCallback() may be called before HAL_USART_Init() in HAL_USART_STATE_RESET + * to register callbacks for HAL_USART_MSPINIT_CB_ID and HAL_USART_MSPDEINIT_CB_ID + * @param husart usart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status ++ */ +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (husart->State == HAL_USART_STATE_READY) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = pCallback; + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = pCallback; + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = pCallback; + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = pCallback; + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = pCallback; + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = pCallback; + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = pCallback; + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = pCallback; + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (husart->State == HAL_USART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an USART Callback + * USART callaback is redirected to the weak predefined callback + * @note The HAL_USART_UnRegisterCallback() may be called before HAL_USART_Init() in HAL_USART_STATE_RESET + * to un-register callbacks for HAL_USART_MSPINIT_CB_ID and HAL_USART_MSPDEINIT_CB_ID + * @param husart usart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_USART_STATE_READY == husart->State) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_USART_STATE_RESET == husart->State) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART synchronous + data transfers. + + [..] The USART supports master mode only: it cannot receive or send data related to an input + clock (SCLK is always an output). + + [..] + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_USART_Transmit_IT() in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) No-Blocking mode API's with DMA are : + (++) HAL_USART_Transmit_DMA() in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_USART_Abort() + (++) HAL_USART_Abort_IT() + + (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided: + (++) HAL_USART_AbortCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify + error type, and HAL_USART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on USART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_USART_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Simplex send an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @param husart USART handle. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout) +{ + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + } + else + { + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + } + + /* Check the remaining data to be sent */ + while (husart->TxXferCount > 0U) + { + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear Transmission Complete Flag */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + + /* At end of Tx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @param husart USART handle. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + prxdata16bits = NULL; + } + + /* as long as data have to be received */ + while (husart->RxXferCount > 0U) + { + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Wait until TXE flag is set to send dummy byte in order to generate the + * clock for the slave to send data. + * Whatever the frame length (7, 8 or 9-bit long), the same dummy value + * can be written for all the cases. */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF); + } + + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + + } + + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* At end of Rx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint16_t uhMask; + uint16_t rxdatacount; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + prxdata16bits = NULL; + } + + if ((husart->TxXferCount == 0x01U) || (husart->SlaveMode == USART_SLAVEMODE_ENABLE)) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + /* Check the remain data to be sent */ + /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + rxdatacount = husart->RxXferCount; + while ((husart->TxXferCount > 0U) || (rxdatacount > 0U)) + { + if (husart->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (husart->RxXferCount > 0U) + { + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + } + rxdatacount = husart->RxXferCount; + } + + /* At end of TxRx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->TxISR = NULL; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, noise error, overrun error) + are not managed by the USART Transmit Process to avoid the overrun interrupt + when the usart mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the usart mode should be + configured only for transmit "USART_MODE_TX" */ + + /* Configure Tx interrupt processing */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the TX FIFO threshold interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXFT); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + uint16_t nb_dummy_data; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->RxISR = NULL; + + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Send dummy data in order to generate the clock for the Slave to send the next data. + When FIFO mode is disabled only one data must be transferred. + When FIFO mode is enabled data must be transmitted until the RX FIFO reaches its threshold. + */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + for (nb_dummy_data = husart->NbRxDataToProcess ; nb_dummy_data > 0U ; nb_dummy_data--) + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + else + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Configure TxRx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the TX and RX FIFO Threshold interrupts */ + SET_BIT(husart->Instance->CR3, (USART_CR3_TXFTIE | USART_CR3_RXFTIE)); + } + else + { + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error and USART Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the USART Transmit Data Register Empty Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + const uint32_t *tmp; + uint16_t nbByte = Size; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + if (husart->hdmatx != NULL) + { + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size multiplied by 2 */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + tmp = (const uint32_t *)&pTxData; + + /* Check linked list mode */ + if ((husart->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((husart->hdmatx->LinkedListQueue != NULL) && (husart->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = *(const uint32_t *)tmp; + + /* Set DMA destination address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&husart->Instance->TDR; + + /* Enable the USART transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(husart->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the USART transmit DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, nbByte); + } + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the USART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp = (uint32_t *)&pRxData; + uint16_t nbByte = Size; + + /* Check that a Rx process is not already ongoing */ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size multiplied by 2 */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + if ((husart->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((husart->hdmarx->LinkedListQueue != NULL) && (husart->hdmarx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&husart->Instance->RDR; + + /* Set DMA destination address */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = *(uint32_t *)tmp; + + /* Enable the USART receive DMA channel */ + status = HAL_DMAEx_List_Start_IT(husart->hdmarx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, nbByte); + } + } + + if ((status == HAL_OK) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive mode */ + + /* Set the USART DMA Tx Complete and Error callback to Null */ + if (husart->hdmatx != NULL) + { + husart->hdmatx->XferErrorCallback = NULL; + husart->hdmatx->XferHalfCpltCallback = NULL; + husart->hdmatx->XferCpltCallback = NULL; + + /* Check linked list mode */ + if ((husart->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((husart->hdmatx->LinkedListQueue != NULL) && (husart->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = *(uint32_t *)tmp; + + /* Set DMA destination address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&husart->Instance->TDR; + + /* Enable the USART transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(husart->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, nbByte); + } + } + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if ((husart->hdmarx != NULL) && ((husart->hdmarx->Mode & DMA_LINKEDLIST) != DMA_LINKEDLIST)) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef status; + const uint32_t *tmp; + uint16_t nbByte = Size; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL)) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, so nbByte should be equal to Size multiplied by 2 */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + nbByte = Size * 2U; + } + + /* Check linked list mode */ + tmp = (uint32_t *)&pRxData; + if ((husart->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((husart->hdmarx->LinkedListQueue != NULL) && (husart->hdmarx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = + (uint32_t)&husart->Instance->RDR; + + /* Set DMA destination address */ + husart->hdmarx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = *(const uint32_t *)tmp; + + /* Enable the USART receive DMA channel */ + status = HAL_DMAEx_List_Start_IT(husart->hdmarx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(const uint32_t *)tmp, nbByte); + } + + /* Enable the USART transmit DMA channel */ + if (status == HAL_OK) + { + tmp = (const uint32_t *)&pTxData; + + /* Check linked list mode */ + if ((husart->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if ((husart->hdmatx->LinkedListQueue != NULL) && (husart->hdmatx->LinkedListQueue->Head != NULL)) + { + /* Set DMA data size */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = nbByte; + + /* Set DMA source address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = *(const uint32_t *)tmp; + + /* Set DMA destination address */ + husart->hdmatx->LinkedListQueue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = + (uint32_t)&husart->Instance->TDR; + + /* Enable the USART transmit DMA channel */ + status = HAL_DMAEx_List_Start_IT(husart->hdmatx); + } + else + { + /* Update status */ + status = HAL_ERROR; + } + } + else + { + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, nbByte); + } + } + } + else + { + status = HAL_ERROR; + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if ((husart->hdmarx != NULL) && ((husart->hdmarx->Mode & DMA_LINKEDLIST) != DMA_LINKEDLIST)) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) && + (state == HAL_USART_STATE_BUSY_TX)) + { + /* Suspend the USART DMA Tx channel : use blocking DMA Suspend API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Suspend callback to Null. + No call back execution at end of DMA Suspend procedure */ + husart->hdmatx->XferSuspendCallback = NULL; + + if (HAL_DMAEx_Suspend(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Set the USART DMA Suspend callback to Null. + No call back execution at end of DMA Suspend procedure */ + husart->hdmarx->XferSuspendCallback = NULL; + + if (HAL_DMAEx_Suspend(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + + if (state == HAL_USART_STATE_BUSY_TX_RX) + { + /* Set the USART DMA Suspend callback to Null. + No call back execution at end of DMA Suspend procedure */ + husart->hdmatx->XferSuspendCallback = NULL; + + if (HAL_DMAEx_Suspend(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if (state == HAL_USART_STATE_BUSY_TX) + { + /* Resume the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMAEx_Resume(husart->hdmatx) != HAL_OK) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_ERROR; + } + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Resume the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMAEx_Resume(husart->hdmarx) != HAL_OK) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_ERROR; + } + } + + if (state == HAL_USART_STATE_BUSY_TX_RX) + { + /* Resume the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMAEx_Resume(husart->hdmatx) != HAL_OK) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_ERROR; + } + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() / + HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + /* Abort the USART DMA rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + USART_EndTransfer(husart); + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (husart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback; + } + else + { + husart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (husart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback; + } + else + { + husart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at USART level */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmatx != NULL) + { + /* USART Tx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK) + { + husart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmarx != NULL) + { + /* USART Rx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + husart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle USART interrupt request. + * @param husart USART handle. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t isrflags = READ_REG(husart->Instance->ISR); + uint32_t cr1its = READ_REG(husart->Instance->CR1); + uint32_t cr3its = READ_REG(husart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF | + USART_ISR_UDR)); + if (errorflags == 0U) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* USART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF); + + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + /* USART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF); + + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + /* USART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF); + + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + /* USART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF); + + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + /* USART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_RTOF); + + husart->ErrorCode |= HAL_USART_ERROR_RTO; + } + + /* USART SPI slave underrun error interrupt occurred -------------------------*/ + if (((isrflags & USART_ISR_UDR) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + /* Ignore SPI slave underrun errors when reception is going on */ + if (husart->State == HAL_USART_STATE_BUSY_RX) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + return; + } + else + { + __HAL_USART_CLEAR_UDRFLAG(husart); + husart->ErrorCode |= HAL_USART_ERROR_UDR; + } + } + + /* Call USART Error Call back function if need be --------------------------*/ + if (husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE; + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) || + (errorcode != 0U)) + { + /* Blocking error : transfer is aborted + Set the USART state ready to be able to start again the process, + Disable Interrupts, and disable DMA requests, if ongoing */ + USART_EndTransfer(husart); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR); + + /* Abort the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + /* Set the USART Tx DMA Abort callback to NULL : no callback + executed at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA TX */ + (void)HAL_DMA_Abort_IT(husart->hdmatx); + } + + /* Abort the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + /* Set the USART Rx DMA Abort callback : + will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */ + husart->hdmarx->XferAbortCallback(husart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + + /* USART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (husart->TxISR != NULL) + { + husart->TxISR(husart); + } + return; + } + + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + USART_EndTransmit_IT(husart); + return; + } + + /* USART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + husart->TxFifoEmptyCallback(husart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_USARTEx_TxFifoEmptyCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } + + /* USART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + husart->RxFifoFullCallback(husart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_USARTEx_RxFifoFullCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief USART Abort Complete callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief USART Peripheral State and Error functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the USART handle state + (+) Return the USART handle error code + +@endverbatim + * @{ + */ + + +/** + * @brief Return the USART handle state. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(const USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle Error Code + */ +uint32_t HAL_USART_GetError(const USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param husart USART handle. + * @retval none + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart) +{ + /* Init the USART Callback settings */ + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion). + * @param husart USART handle. + * @retval None + */ +static void USART_EndTransfer(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* At end of process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA USART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* Check if DMA in circular mode */ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + husart->TxXferCount = 0U; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_TX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half Complete Callback */ + husart->TxHalfCpltCallback(husart); +#else + /* Call legacy weak Tx Half Complete Callback */ + HAL_USART_TxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* Check if DMA in circular mode*/ + if (hdma->Mode != DMA_LINKEDLIST_CIRCULAR) + { + husart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit + in USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + /* similarly, disable the DMA TX transfer that was started to provide the + clock to the slave device */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + husart->State = HAL_USART_STATE_READY; + } + /* DMA circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Half Complete Callback */ + husart->RxHalfCpltCallback(husart); +#else + /* Call legacy weak Rx Half Complete Callback */ + HAL_USART_RxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + USART_EndTransfer(husart); + + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmarx != NULL) + { + if (husart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} + + +/** + * @brief DMA USART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmatx != NULL) + { + if (husart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Handle USART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param husart USART handle. + * @param Flag Specifies the USART flag to check. + * @param Status the actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) +{ + uint32_t tmpreg; + USART_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + uint16_t brrtemp; + uint32_t usartdiv = 0x00000000; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + assert_param(IS_USART_PRESCALER(husart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE and RE bits and configure + * the USART Word Length, Parity and Mode: + * set the M bits according to husart->Init.WordLength value + * set PCE and PS bits according to husart->Init.Parity value + * set TE and RE bits according to husart->Init.Mode value + * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */ + tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Clear and configure the USART Clock, CPOL, CPHA, LBCL STOP and SLVEN bits: + * set CPOL bit according to husart->Init.CLKPolarity value + * set CPHA bit according to husart->Init.CLKPhase value + * set LBCL bit according to husart->Init.CLKLastBit value (used in SPI master mode only) + * set STOP[13:12] bits according to husart->Init.StopBits value */ + tmpreg = (uint32_t)(USART_CLOCK_ENABLE); + tmpreg |= (uint32_t)husart->Init.CLKLastBit; + tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase); + tmpreg |= (uint32_t)husart->Init.StopBits; + MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - USART Clock Prescaler : set PRESCALER according to husart->Init.ClockPrescaler value */ + MODIFY_REG(husart->Instance->PRESC, USART_PRESC_PRESCALER, husart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */ + USART_GETCLOCKSOURCE(husart, clocksource); + + switch (clocksource) + { + case USART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_PLL2Q: + pclk = HAL_RCC_GetPLL2QFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_PLL3Q: + pclk = HAL_RCC_GetPLL3QFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + usartdiv = (uint32_t)(USART_DIV_SAMPLING8((HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)), + husart->Init.BaudRate, husart->Init.ClockPrescaler)); + } + else + { + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HSI_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + } + break; + case USART_CLOCKSOURCE_CSI: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(CSI_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_LSE: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */ + if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + husart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + husart->RxISR = NULL; + husart->TxISR = NULL; + + return ret; +} + +/** + * @brief Check the USART Idle State. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart) +{ + uint32_t tickstart; + + /* Initialize the USART ErrorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the USART state*/ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wraps up transmission in non-blocking mode. + * @param husart Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + /* Clear TxISR function pointer */ + husart->TxISR = NULL; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Tx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if (husart->RxXferCount == 0U) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Rx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_8BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_16BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart_ex.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart_ex.c new file mode 100644 index 000000000..73d05a937 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_usart_ex.c @@ -0,0 +1,541 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_usart_ex.c + * @author MCD Application Team + * @brief Extended USART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Synchronous Receiver Transmitter Peripheral (USART). + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### USART peripheral extended features ##### + ============================================================================== + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When USART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + (#) Slave mode enabling/disabling and NSS pin configuration. + + -@- When USART operates in Slave mode, Slave mode must be enabled prior + starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup USARTEx USARTEx + * @brief USART Extended HAL module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Constants USARTEx Private Constants + * @{ + */ +/* USART RX FIFO depth */ +#define RX_FIFO_DEPTH 16U + +/* USART TX FIFO depth */ +#define TX_FIFO_DEPTH 16U +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup USARTEx_Private_Functions USARTEx Private Functions + * @{ + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USARTEx_Exported_Functions USARTEx Exported Functions + * @{ + */ + +/** @defgroup USARTEx_Exported_Functions_Group1 IO operation functions + * @brief Extended USART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (+) HAL_USARTEx_RxFifoFullCallback() + (+) HAL_USARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief USART RX Fifo full callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief USART TX Fifo empty callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USARTEx_Exported_Functions_Group2 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_USARTEx_EnableSPISlaveMode() API enables the SPI slave mode + (+) HAL_USARTEx_DisableSPISlaveMode() API disables the SPI slave mode + (+) HAL_USARTEx_ConfigNSS API configures the Slave Select input pin (NSS) + (+) HAL_USARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_USARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_USARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_USARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SPI slave mode. + * @note When the USART operates in SPI slave mode, it handles data flow using + * the serial interface clock derived from the external SCLK signal + * provided by the external master SPI device. + * @note In SPI slave mode, the USART must be enabled before starting the master + * communications (or between frames while the clock is stable). Otherwise, + * if the USART slave is enabled while the master is in the middle of a + * frame, it will become desynchronized with the master. + * @note The data register of the slave needs to be ready before the first edge + * of the communication clock or before the end of the ongoing communication, + * otherwise the SPI slave will transmit zeros. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* In SPI slave mode mode, the following bits must be kept cleared: + - LINEN and CLKEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(husart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable SPI slave mode */ + SET_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_ENABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Enable USART */ + __HAL_USART_ENABLE(husart); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the SPI slave mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Disable SPI slave mode */ + CLEAR_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_DISABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Configure the Slave Select input pin (NSS). + * @note Software NSS management: SPI slave will always be selected and NSS + * input pin will be ignored. + * @note Hardware NSS management: the SPI slave selection depends on NSS + * input pin. The slave is selected when NSS is low and deselected when + * NSS is high. + * @param husart USART handle. + * @param NSSConfig NSS configuration. + * This parameter can be one of the following values: + * @arg @ref USART_NSS_HARD + * @arg @ref USART_NSS_SOFT + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + assert_param(IS_USART_NSS(NSSConfig)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Program DIS_NSS bit in the USART_CR2 register */ + MODIFY_REG(husart->Instance->CR2, USART_CR2_DIS_NSS, NSSConfig); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_ENABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_DISABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param husart USART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_TXFIFO_THRESHOLD_1_8 + * @arg @ref USART_TXFIFO_THRESHOLD_1_4 + * @arg @ref USART_TXFIFO_THRESHOLD_1_2 + * @arg @ref USART_TXFIFO_THRESHOLD_3_4 + * @arg @ref USART_TXFIFO_THRESHOLD_7_8 + * @arg @ref USART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update TX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param husart USART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_RXFIFO_THRESHOLD_1_8 + * @arg @ref USART_RXFIFO_THRESHOLD_1_4 + * @arg @ref USART_RXFIFO_THRESHOLD_1_2 + * @arg @ref USART_RXFIFO_THRESHOLD_3_4 + * @arg @ref USART_RXFIFO_THRESHOLD_7_8 + * @arg @ref USART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update RX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USARTEx_Private_Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param husart USART handle. + * @retval None + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (husart->FifoMode == USART_FIFOMODE_DISABLE) + { + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU); + tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU); + husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_wwdg.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_wwdg.c new file mode 100644 index 000000000..bed2c5ee7 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_wwdg.c @@ -0,0 +1,420 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_wwdg.c + * @author MCD Application Team + * @brief WWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Window Watchdog (WWDG) peripheral: + * + Initialization and Configuration functions + * + IO operation functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### WWDG Specific features ##### + ============================================================================== + [..] + Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (T[6;0] downcounter) + before reaching 0x3F value (i.e. a reset is generated when the counter + value rolls down from 0x40 to 0x3F). + + (+) An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + (+) Once enabled the WWDG cannot be disabled except by a system reset. + (+) If required by application, an Early Wakeup Interrupt can be triggered + in order to be warned before WWDG expiration. The Early Wakeup Interrupt + (EWI) can be used if specific safety operations or data logging must + be performed before the actual reset is generated. When the downcounter + reaches 0x40, interrupt occurs. This mechanism requires WWDG interrupt + line to be enabled in NVIC. Once enabled, EWI interrupt cannot be + disabled except by a system reset. + (+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG + reset occurs. + (+) The WWDG counter input clock is derived from the APB clock divided + by a programmable prescaler. + (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler) + (+) WWDG timeout (mS) = 1000 * (T[5;0] + 1) / WWDG clock (Hz) + where T[5;0] are the lowest 6 bits of Counter. + (+) WWDG Counter refresh is allowed between the following limits : + (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock + (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock + (+) Typical values: + (++) Counter min (T[5;0] = 0x00) at 30 MHz (PCLK1) with zero prescaler: + max timeout before reset: approximately 136.53us + (++) Counter max (T[5;0] = 0x3F) at 30 MHz (PCLK1) with prescaler + dividing by 128: + max timeout before reset: approximately 69.91ms + + ##### How to use this driver ##### + ============================================================================== + + *** Common driver usage *** + =========================== + + [..] + (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). + (+) Configure the WWDG prescaler, refresh window value, counter value and early + interrupt status using HAL_WWDG_Init() function. This will automatically + enable WWDG and start its downcounter. Time reference can be taken from + function exit. Care must be taken to provide a counter value + greater than 0x40 to prevent generation of immediate reset. + (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is + generated when the counter reaches 0x40. When HAL_WWDG_IRQHandler is + triggered by the interrupt service routine, flag will be automatically + cleared and HAL_WWDG_WakeupCallback user callback will be executed. User + can add his own code by customization of callback HAL_WWDG_WakeupCallback. + (+) Then the application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_WWDG_Refresh() function. This operation must occur only when + the counter is lower than the refresh window value already programmed. + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows + the user to configure dynamically the driver callbacks. Use Functions + HAL_WWDG_RegisterCallback() to register a user callback. + + (+) Function HAL_WWDG_RegisterCallback() allows to register following + callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (+) Use function HAL_WWDG_UnRegisterCallback() to reset a callback to + the default weak (surcharged) function. HAL_WWDG_UnRegisterCallback() + takes as parameters the HAL peripheral handle and the Callback ID. + This function allows to reset following callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + + [..] + When calling HAL_WWDG_Init function, callbacks are reset to the + corresponding legacy weak (surcharged) functions: + HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have + not been registered before. + + [..] + When compilation define USE_HAL_WWDG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** WWDG HAL driver macros list *** + =================================== + [..] + Below the list of available macros in WWDG HAL driver. + (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral + (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status + (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags + (+) __HAL_WWDG_ENABLE_IT: Enable the WWDG early wakeup interrupt + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +#ifdef HAL_WWDG_MODULE_ENABLED +/** @defgroup WWDG WWDG + * @brief WWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and start the WWDG according to the specified parameters + in the WWDG_InitTypeDef of associated handle. + (+) Initialize the WWDG MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the WWDG according to the specified. + * parameters in the WWDG_InitTypeDef of associated handle. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if (hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); + assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); + assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); + assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode)); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers */ + if (hwwdg->EwiCallback == NULL) + { + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + } + + if (hwwdg->MspInitCallback == NULL) + { + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + } + + /* Init the low level hardware */ + hwwdg->MspInitCallback(hwwdg); +#else + /* Init the low level hardware */ + HAL_WWDG_MspInit(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + + /* Set WWDG Counter */ + WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter)); + + /* Set WWDG Prescaler and Window */ + WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window)); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Initialize the WWDG MSP. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @note When rewriting this function in user file, mechanism may be added + * to avoid multiple initialize when HAL_WWDG_Init function is called + * again to change parameters. + * @retval None + */ +__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_MspInit could be implemented in the user file + */ +} + + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User WWDG Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + status = HAL_ERROR; + } + else + { + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = pCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + + return status; +} + + +/** + * @brief Unregister a WWDG Callback + * WWDG Callback is redirected to the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Refresh the WWDG. + (+) Handle WWDG interrupt request and associated function callback. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the WWDG. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg) +{ + /* Write to WWDG CR the WWDG Counter value to refresh with */ + WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter)); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handle WWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled by calling HAL_WWDG_Init function with + * EWIMode set to WWDG_EWI_ENABLE. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) +{ + /* Check if Early Wakeup Interrupt is enable */ + if (__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) + { + /* Check if WWDG Early Wakeup Interrupt occurred */ + if (__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) + { + /* Clear the WWDG Early Wakeup flag */ + __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Early Wakeup registered callback */ + hwwdg->EwiCallback(hwwdg); +#else + /* Early Wakeup callback */ + HAL_WWDG_EarlyWakeupCallback(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + } + } +} + + +/** + * @brief WWDG Early Wakeup callback. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_WWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_xspi.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_xspi.c new file mode 100644 index 000000000..4949f15d1 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_hal_xspi.c @@ -0,0 +1,3424 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_xspi.c + * @author MCD Application Team + * @brief XSPI HAL module driver. + This file provides firmware functions to manage the following + functionalities of the OctoSPI/HSPI interface (XSPI). + + Initialization and de-initialization functions + + Hyperbus configuration + + Indirect functional mode management + + Memory-mapped functional mode management + + Auto-polling functional mode management + + Interrupts and flags management + + DMA channel configuration for indirect functional mode + + Errors management and abort functionality + + IO manager configuration + + HIGH-SPEED INTERFACE configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + *** Initialization *** + ====================== + [..] + As prerequisite, fill in the HAL_XSPI_MspInit() : + (+) Enable OctoSPI/HSPI clocks interface with __HAL_RCC_XSPI_CLK_ENABLE(). + (+) Reset OctoSPI/HSPI Peripheral with __HAL_RCC_XSPI_FORCE_RESET() and __HAL_RCC_XSPI_RELEASE_RESET(). + (+) Enable the clocks for the OctoSPI/HSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (+) Configure these OctoSPI/HSPI pins in alternate mode using HAL_GPIO_Init(). + (+) If interrupt or DMA mode is used, enable and configure OctoSPI/HSPI global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (+) If DMA mode is used, enable the clocks for the OctoSPI/HSPI DMA channel + with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(), + link it with OctoSPI/HSPI handle using __HAL_LINKDMA(), enable and configure + DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + [..] + Configure the fifo threshold, the memory mode, the memory type, the + device size, the CS high time, the free running clock, the clock mode, + the wrap size, the clock prescaler, the sample shifting, the hold delay + and the CS boundary using the HAL_XSPI_Init() function. + [..] + When using Hyperbus, configure the RW recovery time, the access time, + the write latency and the latency mode using the HAL_XSPI_HyperbusCfg() + function. + + *** Indirect functional mode *** + ================================ + [..] + In regular mode, configure the command sequence using the HAL_XSPI_Command() + or HAL_XSPI_Command_IT() functions : + (+) Instruction phase : the mode used and if present the size, the instruction + opcode and the DTR mode. + (+) Address phase : the mode used and if present the size, the address + value and the DTR mode. + (+) Alternate-bytes phase : the mode used and if present the size, the + alternate bytes values and the DTR mode. + (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). + (+) Data phase : the mode used and if present the number of bytes and the DTR mode. + (+) Data strobe (DQS) mode : the activation (or not) of this mode + (+) IO selection : to access external memory. + (+) Operation type : always common configuration. + [..] + In Hyperbus mode, configure the command sequence using the HAL_XSPI_HyperbusCmd() + function : + (+) Address space : indicate if the access will be done in register or memory + (+) Address size + (+) Number of data + (+) Data strobe (DQS) mode : the activation (or not) of this mode + [..] + If no data is required for the command (only for regular mode, not for + Hyperbus mode), it is sent directly to the memory : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_XSPI_CmdCpltCallback() will be called when the transfer is complete. + [..] + For the indirect write mode, use HAL_XSPI_Transmit(), HAL_XSPI_Transmit_DMA() or + HAL_XSPI_Transmit_IT() after the command configuration : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_XSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_XSPI_TxCpltCallback() will be called when the transfer is complete. + (+) In DMA mode, HAL_XSPI_TxHalfCpltCallback() will be called at the half transfer and + HAL_XSPI_TxCpltCallback() will be called when the transfer is complete. + [..] + For the indirect read mode, use HAL_XSPI_Receive(), HAL_XSPI_Receive_DMA() or + HAL_XSPI_Receive_IT() after the command configuration : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_XSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_XSPI_RxCpltCallback() will be called when the transfer is complete. + (+) In DMA mode, HAL_XSPI_RxHalfCpltCallback() will be called at the half transfer and + HAL_XSPI_RxCpltCallback() will be called when the transfer is complete. + + *** Auto-polling functional mode *** + ==================================== + [..] + Configure the command sequence by the same way than the indirect mode + [..] + Configure the auto-polling functional mode using the HAL_XSPI_AutoPolling() + or HAL_XSPI_AutoPolling_IT() functions : + (+) The size of the status bytes, the match value, the mask used, the match mode (OR/AND), + the polling interval and the automatic stop activation. + [..] + After the configuration : + (+) In polling mode, the output of the function is done when the status match is reached. The + automatic stop is activated to avoid an infinite loop. + (+) In interrupt mode, HAL_XSPI_StatusMatchCallback() will be called each time the status match is reached. + + *** Memory-mapped functional mode *** + ===================================== + [..] + Configure the command sequence by the same way than the indirect mode except + for the operation type in regular mode : + (+) Operation type equals to read configuration : the command configuration + applies to read access in memory-mapped mode + (+) Operation type equals to write configuration : the command configuration + applies to write access in memory-mapped mode + (+) Both read and write configuration should be performed before activating + memory-mapped mode + [..] + Configure the memory-mapped functional mode using the HAL_XSPI_MemoryMapped() + functions : + (+) The timeout activation and the timeout period. + [..] + After the configuration, the OctoSPI/HSPI will be used as soon as an access on the AHB is done on + the address range. HAL_XSPI_TimeOutCallback() will be called when the timeout expires. + + *** Errors management and abort functionality *** + ================================================= + [..] + HAL_XSPI_GetError() function gives the error raised during the last operation. + [..] + HAL_XSPI_Abort() and HAL_XSPI_AbortIT() functions aborts any on-going operation and + flushes the fifo : + (+) In polling mode, the output of the function is done when the transfer + complete bit is set and the busy bit cleared. + (+) In interrupt mode, HAL_XSPI_AbortCpltCallback() will be called when + the transfer complete bit is set. + + *** Control functions *** + ========================= + [..] + HAL_XSPI_GetState() function gives the current state of the HAL XSPI driver. + [..] + HAL_XSPI_SetTimeout() function configures the timeout value used in the driver. + [..] + HAL_XSPI_SetFifoThreshold() function configures the threshold on the Fifo of the OctoSPI/HSPI Peripheral. + [..] + HAL_XSPI_SetMemoryType() function configures the type of the external memory. + [..] + HAL_XSPI_SetDeviceSize() function configures the size of the external memory. + [..] + HAL_XSPI_SetClockPrescaler() function configures the clock prescaler of the OctoSPI/HSPI Peripheral. + [..] + HAL_XSPI_GetFifoThreshold() function gives the current of the Fifo's threshold + + *** IO manager configuration functions *** + ========================================== + [..] + HAL_XSPIM_Config() function configures the IO manager for the XSPI instance. + + *** High-speed interface and calibration functions *** + ========================================== + [..] + The purpose of High-speed interface is primary to shift data or data strobe by one quarter of octal + bus clock period, with a correct timing accuracy. DLL must be calibrated versus this clock period. + The calibration process is automatically enabled when one of the three conditions below is met: + (+) The XSPI exits Reset state. + (+) The Prescaler is set. + (+) The configuration of communication is set. + [..] + HAL_XSPI_GetDelayValue() function Get the delay values of the high-speed interface DLLs.. + [..] + HAL_XSPI_SetDelayValue() function Set the delay values of the high-speed interface DLLs.. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_XSPI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use function HAL_XSPI_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. + (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : XSPI MspInit. + (+) MspDeInitCallback : XSPI MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_XSPI_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. + (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : XSPI MspInit. + (+) MspDeInitCallback : XSPI MspDeInit. + [..] + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + [..] + By default, after the HAL_XSPI_Init() and if the state is HAL_XSPI_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_XSPI_Init() + and HAL_XSPI_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_XSPI_Init() and HAL_XSPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_XSPI_RegisterCallback() before calling HAL_XSPI_DeInit() + or HAL_XSPI_Init() function. + + [..] + When The compilation define USE_HAL_XSPI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +#if defined(XSPI) || defined(XSPI1) || defined(XSPI2) + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup XSPI XSPI + * @brief XSPI HAL module driver + * @{ + */ + +#ifdef HAL_XSPI_MODULE_ENABLED + +/** + @cond 0 + */ +/* Private typedef -----------------------------------------------------------*/ + +/* Private define ------------------------------------------------------------*/ +#define XSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000) /*!< Indirect write mode */ +#define XSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)XSPI_CR_FMODE_0) /*!< Indirect read mode */ +#define XSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)XSPI_CR_FMODE_1) /*!< Automatic polling mode */ +#define XSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)XSPI_CR_FMODE) /*!< Memory-mapped mode */ + +#define XSPI_CFG_STATE_MASK 0x00000004U +#define XSPI_BUSY_STATE_MASK 0x00000008U + +#define XSPI_NB_INSTANCE 2U +#define XSPI_IOM_NB_PORTS 2U +#define XSPI_IOM_PORT_MASK 0x1U + +/* Private macro -------------------------------------------------------------*/ +#define IS_XSPI_FUNCTIONAL_MODE(MODE) (((MODE) == XSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \ + ((MODE) == XSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \ + ((MODE) == XSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \ + ((MODE) == XSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)) + +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +static void XSPI_DMACplt(DMA_HandleTypeDef *hdma); +static void XSPI_DMAHalfCplt(DMA_HandleTypeDef *hdma); +static void XSPI_DMAError(DMA_HandleTypeDef *hdma); +static void XSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef XSPI_WaitFlagStateUntilTimeout(XSPI_HandleTypeDef *hxspi, uint32_t Flag, FlagStatus State, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef XSPI_ConfigCmd(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *const pCmd); +static void XSPIM_GetConfig(uint8_t instance_nb, XSPIM_CfgTypeDef *const pCfg); +/** + @endcond + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup XSPI_Exported_Functions XSPI Exported Functions + * @{ + */ + +/** @defgroup XSPI_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Initialize the XSPI. + (+) De-initialize the XSPI. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the XSPI mode according to the specified parameters + * in the XSPI_InitTypeDef and initialize the associated handle. + * @param hxspi : XSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Init(XSPI_HandleTypeDef *hxspi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart = HAL_GetTick(); + + /* Check the XSPI handle allocation */ + if (hxspi == NULL) + { + status = HAL_ERROR; + /* No error code can be set set as the handler is null */ + } + else + { + /* Check the parameters of the initialization structure */ + assert_param(IS_XSPI_MEMORY_MODE(hxspi->Init.MemoryMode)); + assert_param(IS_XSPI_MEMORY_TYPE(hxspi->Init.MemoryType)); + assert_param(IS_XSPI_MEMORY_SIZE(hxspi->Init.MemorySize)); + assert_param(IS_XSPI_CS_HIGH_TIME_CYCLE(hxspi->Init.ChipSelectHighTimeCycle)); + assert_param(IS_XSPI_FREE_RUN_CLK(hxspi->Init.FreeRunningClock)); + assert_param(IS_XSPI_CLOCK_MODE(hxspi->Init.ClockMode)); + assert_param(IS_XSPI_WRAP_SIZE(hxspi->Init.WrapSize)); + assert_param(IS_XSPI_CLK_PRESCALER(hxspi->Init.ClockPrescaler)); + assert_param(IS_XSPI_SAMPLE_SHIFTING(hxspi->Init.SampleShifting)); + assert_param(IS_XSPI_DHQC(hxspi->Init.DelayHoldQuarterCycle)); + assert_param(IS_XSPI_CS_BOUND(hxspi->Init.ChipSelectBoundary)); + assert_param(IS_XSPI_FIFO_THRESHOLD_BYTE(hxspi->Init.FifoThresholdByte)); + assert_param(IS_XSPI_MAXTRAN(hxspi->Init.MaxTran)); + assert_param(IS_XSPI_CSSEL(hxspi->Init.MemorySelect)); + /* Initialize error code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_NONE; + + /* Check if the state is the reset state */ + if (hxspi->State == HAL_XSPI_STATE_RESET) + { +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_XSPI_STATE_RESET only */ + hxspi->ErrorCallback = HAL_XSPI_ErrorCallback; + hxspi->AbortCpltCallback = HAL_XSPI_AbortCpltCallback; + hxspi->FifoThresholdCallback = HAL_XSPI_FifoThresholdCallback; + hxspi->CmdCpltCallback = HAL_XSPI_CmdCpltCallback; + hxspi->RxCpltCallback = HAL_XSPI_RxCpltCallback; + hxspi->TxCpltCallback = HAL_XSPI_TxCpltCallback; + hxspi->RxHalfCpltCallback = HAL_XSPI_RxHalfCpltCallback; + hxspi->TxHalfCpltCallback = HAL_XSPI_TxHalfCpltCallback; + hxspi->StatusMatchCallback = HAL_XSPI_StatusMatchCallback; + hxspi->TimeOutCallback = HAL_XSPI_TimeOutCallback; + + if (hxspi->MspInitCallback == NULL) + { + hxspi->MspInitCallback = HAL_XSPI_MspInit; + } + + /* Init the low level hardware */ + hxspi->MspInitCallback(hxspi); +#else + /* Initialization of the low level hardware */ + HAL_XSPI_MspInit(hxspi); +#endif /* defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + + /* Configure the default timeout for the XSPI memory access */ + (void)HAL_XSPI_SetTimeout(hxspi, HAL_XSPI_TIMEOUT_DEFAULT_VALUE); + + /* Configure memory type, device size, chip select high time, free running clock, clock mode */ + MODIFY_REG(hxspi->Instance->DCR1, + (XSPI_DCR1_MTYP | XSPI_DCR1_DEVSIZE | XSPI_DCR1_CSHT | XSPI_DCR1_FRCK | XSPI_DCR1_CKMODE), + (hxspi->Init.MemoryType | ((hxspi->Init.MemorySize) << XSPI_DCR1_DEVSIZE_Pos) | + ((hxspi->Init.ChipSelectHighTimeCycle - 1U) << XSPI_DCR1_CSHT_Pos) | hxspi->Init.ClockMode)); + + /* Configure wrap size */ + MODIFY_REG(hxspi->Instance->DCR2, XSPI_DCR2_WRAPSIZE, hxspi->Init.WrapSize); + + /* Configure chip select boundary */ + MODIFY_REG(hxspi->Instance->DCR3, XSPI_DCR3_CSBOUND, (hxspi->Init.ChipSelectBoundary << XSPI_DCR3_CSBOUND_Pos)); + + /* Configure maximum transfer */ + MODIFY_REG(hxspi->Instance->DCR3, XSPI_DCR3_MAXTRAN, \ + (hxspi->Init.MaxTran << XSPI_DCR3_MAXTRAN_Pos)); + + /* Configure refresh */ + hxspi->Instance->DCR4 = hxspi->Init.Refresh; + + /* Configure FIFO threshold */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FTHRES, ((hxspi->Init.FifoThresholdByte - 1U) << XSPI_CR_FTHRES_Pos)); + + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + /* Configure clock prescaler */ + MODIFY_REG(hxspi->Instance->DCR2, XSPI_DCR2_PRESCALER, + ((hxspi->Init.ClockPrescaler) << XSPI_DCR2_PRESCALER_Pos)); + + if (IS_XSPI_ALL_INSTANCE(hxspi->Instance)) + { + /* The configuration of clock prescaler trigger automatically a calibration process. + So it is necessary to wait the calibration is complete */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + if (status != HAL_OK) + { + return status; + } + } + /* Configure Dual Memory mode and CS Selection */ + MODIFY_REG(hxspi->Instance->CR, (XSPI_CR_DMM | XSPI_CR_CSSEL), + (hxspi->Init.MemoryMode | hxspi->Init.MemorySelect)); + + /* Configure sample shifting and delay hold quarter cycle */ + MODIFY_REG(hxspi->Instance->TCR, (XSPI_TCR_SSHIFT | XSPI_TCR_DHQC), + (hxspi->Init.SampleShifting | hxspi->Init.DelayHoldQuarterCycle)); + + /* Enable XSPI */ + HAL_XSPI_ENABLE(hxspi); + + /* Enable free running clock if needed : must be done after XSPI enable */ + if (hxspi->Init.FreeRunningClock == HAL_XSPI_FREERUNCLK_ENABLE) + { + SET_BIT(hxspi->Instance->DCR1, XSPI_DCR1_FRCK); + } + + /* Initialize the XSPI state */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + hxspi->State = HAL_XSPI_STATE_HYPERBUS_INIT; + } + else + { + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + } + return status; +} + +/** + * @brief Initialize the XSPI MSP. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_MspInit(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_MspInit can be implemented in the user file + */ +} + +/** + * @brief De-Initialize the XSPI peripheral. + * @param hxspi : XSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_DeInit(XSPI_HandleTypeDef *hxspi) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the XSPI handle allocation */ + if (hxspi == NULL) + { + status = HAL_ERROR; + /* No error code can be set as the handler is null */ + } + else + { + /* Disable XSPI */ + HAL_XSPI_DISABLE(hxspi); + + /* Disable free running clock if needed : must be done after XSPI disable */ + CLEAR_BIT(hxspi->Instance->DCR1, XSPI_DCR1_FRCK); + +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + if (hxspi->MspDeInitCallback == NULL) + { + hxspi->MspDeInitCallback = HAL_XSPI_MspDeInit; + } + + /* De-initialize the low level hardware */ + hxspi->MspDeInitCallback(hxspi); +#else + /* De-initialize the low-level hardware */ + HAL_XSPI_MspDeInit(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + + /* Reset the driver state */ + hxspi->State = HAL_XSPI_STATE_RESET; + } + + return status; +} + +/** + * @brief DeInitialize the XSPI MSP. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_MspDeInit(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup XSPI_Exported_Functions_Group2 Input and Output operation functions + * @brief XSPI Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Handle the interrupts. + (+) Handle the command sequence (regular and Hyperbus). + (+) Handle the Hyperbus configuration. + (+) Transmit data in blocking, interrupt or DMA mode. + (+) Receive data in blocking, interrupt or DMA mode. + (+) Manage the auto-polling functional mode. + (+) Manage the memory-mapped functional mode. + +@endverbatim + * @{ + */ + +/** + * @brief Handle XSPI interrupt request. + * @param hxspi : XSPI handle + * @retval None + */ +void HAL_XSPI_IRQHandler(XSPI_HandleTypeDef *hxspi) +{ + __IO uint32_t *data_reg = &hxspi->Instance->DR; + uint32_t flag = hxspi->Instance->SR; + uint32_t itsource = hxspi->Instance->CR; + uint32_t currentstate = hxspi->State; + + /* XSPI fifo threshold interrupt occurred -------------------------------*/ + if (((flag & HAL_XSPI_FLAG_FT) != 0U) && ((itsource & HAL_XSPI_IT_FT) != 0U)) + { + if (currentstate == HAL_XSPI_STATE_BUSY_TX) + { + /* Write a data in the fifo */ + *((__IO uint8_t *)data_reg) = *hxspi->pBuffPtr; + hxspi->pBuffPtr++; + hxspi->XferCount--; + } + else if (currentstate == HAL_XSPI_STATE_BUSY_RX) + { + /* Read a data from the fifo */ + *hxspi->pBuffPtr = *((__IO uint8_t *)data_reg); + hxspi->pBuffPtr++; + hxspi->XferCount--; + } + else + { + /* Nothing to do */ + } + + if (hxspi->XferCount == 0U) + { + /* All data have been received or transmitted for the transfer */ + /* Disable fifo threshold interrupt */ + HAL_XSPI_DISABLE_IT(hxspi, HAL_XSPI_IT_FT); + } + + /* Fifo threshold callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->FifoThresholdCallback(hxspi); +#else + HAL_XSPI_FifoThresholdCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + /* XSPI transfer complete interrupt occurred ----------------------------*/ + else if (((flag & HAL_XSPI_FLAG_TC) != 0U) && ((itsource & HAL_XSPI_IT_TC) != 0U)) + { + if (currentstate == HAL_XSPI_STATE_BUSY_RX) + { + if ((hxspi->XferCount > 0U) && ((flag & XSPI_SR_FLEVEL) != 0U)) + { + /* Read the last data received in the fifo */ + *hxspi->pBuffPtr = *((__IO uint8_t *)data_reg); + hxspi->pBuffPtr++; + hxspi->XferCount--; + } + else if (hxspi->XferCount == 0U) + { + /* Clear flag */ + hxspi->Instance->FCR = HAL_XSPI_FLAG_TC; + + /* Disable the interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_FT | HAL_XSPI_IT_TE); + + hxspi->State = HAL_XSPI_STATE_READY; + + /* RX complete callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->RxCpltCallback(hxspi); +#else + HAL_XSPI_RxCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Clear flag */ + hxspi->Instance->FCR = HAL_XSPI_FLAG_TC; + + /* Disable the interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_FT | HAL_XSPI_IT_TE); + + hxspi->State = HAL_XSPI_STATE_READY; + + if (currentstate == HAL_XSPI_STATE_BUSY_TX) + { + /* TX complete callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->TxCpltCallback(hxspi); +#else + HAL_XSPI_TxCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else if (currentstate == HAL_XSPI_STATE_BUSY_CMD) + { + /* Command complete callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->CmdCpltCallback(hxspi); +#else + HAL_XSPI_CmdCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else if (currentstate == HAL_XSPI_STATE_ABORT) + { + if (hxspi->ErrorCode == HAL_XSPI_ERROR_NONE) + { + /* Abort called by the user */ + /* Abort complete callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->AbortCpltCallback(hxspi); +#else + HAL_XSPI_AbortCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { + /* Abort due to an error (eg : DMA error) */ + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + /* Nothing to do */ + } + } + } + /* XSPI status match interrupt occurred ---------------------------------*/ + else if (((flag & HAL_XSPI_FLAG_SM) != 0U) && ((itsource & HAL_XSPI_IT_SM) != 0U)) + { + /* Clear flag */ + hxspi->Instance->FCR = HAL_XSPI_FLAG_SM; + + /* Check if automatic poll mode stop is activated */ + if ((hxspi->Instance->CR & XSPI_CR_APMS) != 0U) + { + /* Disable the interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, HAL_XSPI_IT_SM | HAL_XSPI_IT_TE); + + hxspi->State = HAL_XSPI_STATE_READY; + } + + /* Status match callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->StatusMatchCallback(hxspi); +#else + HAL_XSPI_StatusMatchCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + /* XSPI transfer error interrupt occurred -------------------------------*/ + else if (((flag & HAL_XSPI_FLAG_TE) != 0U) && ((itsource & HAL_XSPI_IT_TE) != 0U)) + { + /* Clear flag */ + hxspi->Instance->FCR = HAL_XSPI_FLAG_TE; + + /* Disable all interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, (HAL_XSPI_IT_TO | HAL_XSPI_IT_SM | HAL_XSPI_IT_FT | HAL_XSPI_IT_TC | HAL_XSPI_IT_TE)); + + /* Set error code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_TRANSFER; + + /* Check if the DMA is enabled */ + if ((hxspi->Instance->CR & XSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the XSPI side */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + + /* Disable the DMA transmit on the DMA side */ + hxspi->hdmatx->XferAbortCallback = XSPI_DMAAbortCplt; + if (HAL_DMA_Abort_IT(hxspi->hdmatx) != HAL_OK) + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + + /* Disable the DMA receive on the DMA side */ + hxspi->hdmarx->XferAbortCallback = XSPI_DMAAbortCplt; + if (HAL_DMA_Abort_IT(hxspi->hdmarx) != HAL_OK) + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + /* XSPI timeout interrupt occurred --------------------------------------*/ + else if (((flag & HAL_XSPI_FLAG_TO) != 0U) && ((itsource & HAL_XSPI_IT_TO) != 0U)) + { + /* Clear flag */ + hxspi->Instance->FCR = HAL_XSPI_FLAG_TO; + + /* Timeout callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->TimeOutCallback(hxspi); +#else + HAL_XSPI_TimeOutCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief Set the command configuration. + * @param hxspi : XSPI handle + * @param pCmd : structure that contains the command configuration information + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Command(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *const pCmd, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the command structure */ + assert_param(IS_XSPI_OPERATION_TYPE(pCmd->OperationType)); + if (hxspi->Init.MemoryMode == HAL_XSPI_SINGLE_MEM) + { + assert_param(IS_XSPI_IO_SELECT(pCmd->IOSelect)); + } + + assert_param(IS_XSPI_INSTRUCTION_MODE(pCmd->InstructionMode)); + if (pCmd->InstructionMode != HAL_XSPI_INSTRUCTION_NONE) + { + assert_param(IS_XSPI_INSTRUCTION_WIDTH(pCmd->InstructionWidth)); + assert_param(IS_XSPI_INSTRUCTION_DTR_MODE(pCmd->InstructionDTRMode)); + } + + assert_param(IS_XSPI_ADDRESS_MODE(pCmd->AddressMode)); + if (pCmd->AddressMode != HAL_XSPI_ADDRESS_NONE) + { + assert_param(IS_XSPI_ADDRESS_WIDTH(pCmd->AddressWidth)); + assert_param(IS_XSPI_ADDRESS_DTR_MODE(pCmd->AddressDTRMode)); + } + + assert_param(IS_XSPI_ALT_BYTES_MODE(pCmd->AlternateBytesMode)); + if (pCmd->AlternateBytesMode != HAL_XSPI_ALT_BYTES_NONE) + { + assert_param(IS_XSPI_ALT_BYTES_WIDTH(pCmd->AlternateBytesWidth)); + assert_param(IS_XSPI_ALT_BYTES_DTR_MODE(pCmd->AlternateBytesDTRMode)); + } + + assert_param(IS_XSPI_DATA_MODE(hxspi->Init.MemoryType, pCmd->DataMode)); + + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + if (pCmd->OperationType == HAL_XSPI_OPTYPE_COMMON_CFG) + { + assert_param(IS_XSPI_DATA_LENGTH(pCmd->DataLength)); + } + assert_param(IS_XSPI_DATA_DTR_MODE(pCmd->DataDTRMode)); + assert_param(IS_XSPI_DUMMY_CYCLES(pCmd->DummyCycles)); + } + + assert_param(IS_XSPI_DQS_MODE(pCmd->DQSMode)); + + /* Check the state of the driver */ + state = hxspi->State; + if (((state == HAL_XSPI_STATE_READY) && (hxspi->Init.MemoryType != HAL_XSPI_MEMTYPE_HYPERBUS)) || + ((state == HAL_XSPI_STATE_READ_CMD_CFG) && ((pCmd->OperationType == HAL_XSPI_OPTYPE_WRITE_CFG) || + (pCmd->OperationType == HAL_XSPI_OPTYPE_WRAP_CFG))) || + ((state == HAL_XSPI_STATE_WRITE_CMD_CFG) && + ((pCmd->OperationType == HAL_XSPI_OPTYPE_READ_CFG) || + (pCmd->OperationType == HAL_XSPI_OPTYPE_WRAP_CFG)))) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Initialize error code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_NONE; + + /* Configure the registers */ + status = XSPI_ConfigCmd(hxspi, pCmd); + + if (status == HAL_OK) + { + if (pCmd->DataMode == HAL_XSPI_DATA_NONE) + { + /* When there is no data phase, the transfer start as soon as the configuration is done + so wait until TC flag is set to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_TC, SET, tickstart, Timeout); + + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + } + else + { + /* Update the state */ + if (pCmd->OperationType == HAL_XSPI_OPTYPE_COMMON_CFG) + { + hxspi->State = HAL_XSPI_STATE_CMD_CFG; + } + else if (pCmd->OperationType == HAL_XSPI_OPTYPE_READ_CFG) + { + if (hxspi->State == HAL_XSPI_STATE_WRITE_CMD_CFG) + { + hxspi->State = HAL_XSPI_STATE_CMD_CFG; + } + else + { + hxspi->State = HAL_XSPI_STATE_READ_CMD_CFG; + } + } + else if (pCmd->OperationType == HAL_XSPI_OPTYPE_WRITE_CFG) + { + if (hxspi->State == HAL_XSPI_STATE_READ_CMD_CFG) + { + hxspi->State = HAL_XSPI_STATE_CMD_CFG; + } + else + { + hxspi->State = HAL_XSPI_STATE_WRITE_CMD_CFG; + } + } + else + { + /* Wrap configuration, no state change */ + } + } + } + } + else + { + status = HAL_BUSY; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Set the command configuration in interrupt mode. + * @param hxspi : XSPI handle + * @param pCmd : structure that contains the command configuration information + * @note This function is used only in Indirect Read or Write Modes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Command_IT(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *const pCmd) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the command structure */ + assert_param(IS_XSPI_OPERATION_TYPE(pCmd->OperationType)); + + if (hxspi->Init.MemoryMode == HAL_XSPI_SINGLE_MEM) + { + assert_param(IS_XSPI_IO_SELECT(pCmd->IOSelect)); + } + + assert_param(IS_XSPI_INSTRUCTION_MODE(pCmd->InstructionMode)); + if (pCmd->InstructionMode != HAL_XSPI_INSTRUCTION_NONE) + { + assert_param(IS_XSPI_INSTRUCTION_WIDTH(pCmd->InstructionWidth)); + assert_param(IS_XSPI_INSTRUCTION_DTR_MODE(pCmd->InstructionDTRMode)); + } + + assert_param(IS_XSPI_ADDRESS_MODE(pCmd->AddressMode)); + if (pCmd->AddressMode != HAL_XSPI_ADDRESS_NONE) + { + assert_param(IS_XSPI_ADDRESS_WIDTH(pCmd->AddressWidth)); + assert_param(IS_XSPI_ADDRESS_DTR_MODE(pCmd->AddressDTRMode)); + } + + assert_param(IS_XSPI_ALT_BYTES_MODE(pCmd->AlternateBytesMode)); + if (pCmd->AlternateBytesMode != HAL_XSPI_ALT_BYTES_NONE) + { + assert_param(IS_XSPI_ALT_BYTES_WIDTH(pCmd->AlternateBytesWidth)); + assert_param(IS_XSPI_ALT_BYTES_DTR_MODE(pCmd->AlternateBytesDTRMode)); + } + + assert_param(IS_XSPI_DATA_MODE(hxspi->Init.MemoryType, pCmd->DataMode)); + + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + assert_param(IS_XSPI_DATA_LENGTH(pCmd->DataLength)); + assert_param(IS_XSPI_DATA_DTR_MODE(pCmd->DataDTRMode)); + assert_param(IS_XSPI_DUMMY_CYCLES(pCmd->DummyCycles)); + } + + assert_param(IS_XSPI_DQS_MODE(pCmd->DQSMode)); + + /* Check the state of the driver */ + if ((hxspi->State == HAL_XSPI_STATE_READY) && (pCmd->OperationType == HAL_XSPI_OPTYPE_COMMON_CFG) && + (pCmd->DataMode == HAL_XSPI_DATA_NONE) && (hxspi->Init.MemoryType != HAL_XSPI_MEMTYPE_HYPERBUS)) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + /* Initialize error code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_NONE; + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_TC); + + /* Configure the registers */ + status = XSPI_ConfigCmd(hxspi, pCmd); + + if (status == HAL_OK) + { + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_BUSY_CMD; + + /* Enable the transfer complete and transfer error interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_TE); + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Configure the Hyperbus parameters. + * @param hxspi : XSPI handle + * @param pCfg : Pointer to Structure containing the Hyperbus configuration + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_HyperbusCfg(XSPI_HandleTypeDef *hxspi, XSPI_HyperbusCfgTypeDef *const pCfg, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the hyperbus configuration structure */ + assert_param(IS_XSPI_RW_RECOVERY_TIME_CYCLE(pCfg->RWRecoveryTimeCycle)); + assert_param(IS_XSPI_ACCESS_TIME_CYCLE(pCfg->AccessTimeCycle)); + assert_param(IS_XSPI_WRITE_ZERO_LATENCY(pCfg->WriteZeroLatency)); + assert_param(IS_XSPI_LATENCY_MODE(pCfg->LatencyMode)); + + /* Check the state of the driver */ + state = hxspi->State; + if ((state == HAL_XSPI_STATE_HYPERBUS_INIT) || (state == HAL_XSPI_STATE_READY)) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Configure Hyperbus configuration Latency register */ + WRITE_REG(hxspi->Instance->HLCR, ((pCfg->RWRecoveryTimeCycle << XSPI_HLCR_TRWR_Pos) | + (pCfg->AccessTimeCycle << XSPI_HLCR_TACC_Pos) | + pCfg->WriteZeroLatency | pCfg->LatencyMode)); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_READY; + } + else + { + status = HAL_BUSY; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Set the Hyperbus command configuration. + * @param hxspi : XSPI handle + * @param pCmd : Structure containing the Hyperbus command + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_HyperbusCmd(XSPI_HandleTypeDef *hxspi, XSPI_HyperbusCmdTypeDef *const pCmd, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the hyperbus command structure */ + assert_param(IS_XSPI_ADDRESS_SPACE(pCmd->AddressSpace)); + assert_param(IS_XSPI_ADDRESS_WIDTH(pCmd->AddressWidth)); + assert_param(IS_XSPI_DATA_LENGTH(pCmd->DataLength)); + assert_param(IS_XSPI_DQS_MODE(pCmd->DQSMode)); + assert_param(IS_XSPI_DATA_MODE(hxspi->Init.MemoryType, pCmd->DataMode)); + + /* Check the state of the driver */ + if ((hxspi->State == HAL_XSPI_STATE_READY) && (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS)) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Re-initialize the value of the functional mode */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, 0U); + + /* Configure the address space in the DCR1 register */ + MODIFY_REG(hxspi->Instance->DCR1, XSPI_DCR1_MTYP_0, pCmd->AddressSpace); + + /* Configure the CCR and WCCR registers with the address size and the following configuration : + - DQS signal enabled (used as RWDS) + - DTR mode enabled on address and data */ + /* - address and data on 8 or 16 lines */ + WRITE_REG(hxspi->Instance->CCR, (pCmd->DQSMode | XSPI_CCR_DDTR | pCmd->DataMode | + pCmd->AddressWidth | XSPI_CCR_ADDTR | XSPI_CCR_ADMODE_2)); + WRITE_REG(hxspi->Instance->WCCR, (pCmd->DQSMode | XSPI_WCCR_DDTR | pCmd->DataMode | + pCmd->AddressWidth | XSPI_WCCR_ADDTR | XSPI_WCCR_ADMODE_2)); + + /* Configure the DLR register with the number of data */ + WRITE_REG(hxspi->Instance->DLR, (pCmd->DataLength - 1U)); + + /* Configure the AR register with the address value */ + WRITE_REG(hxspi->Instance->AR, pCmd->Address); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_CMD_CFG; + } + else + { + status = HAL_BUSY; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer + * @param Timeout : Timeout duration + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Transmit(XSPI_HandleTypeDef *hxspi, const uint8_t *pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t *data_reg = &hxspi->Instance->DR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hxspi->XferCount = READ_REG(hxspi->Instance->DLR) + 1U; + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = (uint8_t *)pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + do + { + /* Wait till fifo threshold flag is set to send data */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_FT, SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *((__IO uint8_t *)data_reg) = *hxspi->pBuffPtr; + hxspi->pBuffPtr++; + hxspi->XferCount--; + } while (hxspi->XferCount > 0U); + + if (status == HAL_OK) + { + /* Wait till transfer complete flag is set to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer + * @param Timeout : Timeout duration + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Receive(XSPI_HandleTypeDef *hxspi, uint8_t *const pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t *data_reg = &hxspi->Instance->DR; + uint32_t addr_reg = hxspi->Instance->AR; + uint32_t ir_reg = hxspi->Instance->IR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hxspi->XferCount = READ_REG(hxspi->Instance->DLR) + 1U; + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Trig the transfer by re-writing address or instruction register */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hxspi->Instance->CCR, XSPI_CCR_ADMODE) != HAL_XSPI_ADDRESS_NONE) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hxspi->Instance->IR, ir_reg); + } + } + + do + { + /* Wait till fifo threshold or transfer complete flags are set to read received data */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, (HAL_XSPI_FLAG_FT | HAL_XSPI_FLAG_TC), SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *hxspi->pBuffPtr = *((__IO uint8_t *)data_reg); + hxspi->pBuffPtr++; + hxspi->XferCount--; + } while (hxspi->XferCount > 0U); + + if (status == HAL_OK) + { + /* Wait till transfer complete flag is set to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with interrupt. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Transmit_IT(XSPI_HandleTypeDef *hxspi, const uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hxspi->XferCount = READ_REG(hxspi->Instance->DLR) + 1U; + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = (uint8_t *)pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_TC); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_BUSY_TX; + + /* Enable the transfer complete, fifo threshold and transfer error interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_FT | HAL_XSPI_IT_TE); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with interrupt. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Receive_IT(XSPI_HandleTypeDef *hxspi, uint8_t *const pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t addr_reg = hxspi->Instance->AR; + uint32_t ir_reg = hxspi->Instance->IR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hxspi->XferCount = READ_REG(hxspi->Instance->DLR) + 1U; + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_TC); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_BUSY_RX; + + /* Enable the transfer complete, fifo threshold and transfer error interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_FT | HAL_XSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hxspi->Instance->CCR, XSPI_CCR_ADMODE) != HAL_XSPI_ADDRESS_NONE) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hxspi->Instance->IR, ir_reg); + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with DMA. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @note If DMA peripheral access is configured as halfword, the number + * of data and the fifo threshold should be aligned on halfword + * @note If DMA peripheral access is configured as word, the number + * of data and the fifo threshold should be aligned on word + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Transmit_DMA(XSPI_HandleTypeDef *hxspi, const uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t data_size = hxspi->Instance->DLR + 1U; + DMA_QListTypeDef *p_queue = {NULL}; + uint32_t data_width = DMA_DEST_DATAWIDTH_BYTE; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + if ((hxspi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + p_queue = hxspi->hdmatx->LinkedListQueue; + if ((p_queue != NULL) && (p_queue->Head != NULL)) + { + data_width = p_queue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + } + else + { + /* Set Error Code function status */ + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + + /* Return function status */ + status = HAL_ERROR; + } + } + else + { + data_width = hxspi->hdmatx->Init.DestDataWidth; + } + /* Configure counters and size */ + if (data_width == DMA_DEST_DATAWIDTH_BYTE) + { + hxspi->XferCount = data_size; + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + if (((data_size % 2U) != 0U) || ((hxspi->Init.FifoThresholdByte % 2U) != 0U)) + { + /* The number of data or the fifo threshold is not aligned on halfword + => no transfer possible with DMA peripheral access configured as halfword */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + hxspi->XferCount = data_size; + } + } + else if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + if (((data_size % 4U) != 0U) || ((hxspi->Init.FifoThresholdByte % 4U) != 0U)) + { + /* The number of data or the fifo threshold is not aligned on word + => no transfer possible with DMA peripheral access configured as word */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + hxspi->XferCount = data_size; + } + } + else + { + /* Nothing to do */ + } + + if (status == HAL_OK) + { + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = (uint8_t *)pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_TC); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_BUSY_TX; + + /* Set the DMA transfer complete callback */ + hxspi->hdmatx->XferCpltCallback = XSPI_DMACplt; + + /* Set the DMA Half transfer complete callback */ + hxspi->hdmatx->XferHalfCpltCallback = XSPI_DMAHalfCplt; + + /* Set the DMA error callback */ + hxspi->hdmatx->XferErrorCallback = XSPI_DMAError; + + /* Clear the DMA abort callback */ + hxspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the transmit DMA Channel */ + if ((hxspi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hxspi->hdmatx->LinkedListQueue != NULL) + { + /* Enable the DMA channel */ + MODIFY_REG(p_queue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET], \ + (DMA_CTR1_SINC | DMA_CTR1_DINC), (DMA_SINC_INCREMENTED | DMA_DINC_FIXED)); + MODIFY_REG(p_queue->Head->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET], \ + DMA_CTR2_DREQ, DMA_MEMORY_TO_PERIPH); + /* Set DMA data size*/ + p_queue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hxspi->XferSize; + /* Set DMA source address */ + p_queue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)pData; + /* Set DMA destination address */ + p_queue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)&hxspi->Instance->DR; + + status = HAL_DMAEx_List_Start_IT(hxspi->hdmatx); + } + else + { + /* Set Error Code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + + hxspi->State = HAL_XSPI_STATE_READY; + + /* Return function status */ + status = HAL_ERROR; + } + } + else + { + if ((hxspi->hdmatx->Init.Direction == DMA_MEMORY_TO_PERIPH) && + (hxspi->hdmatx->Init.SrcInc == DMA_SINC_INCREMENTED) && (hxspi->hdmatx->Init.DestInc == DMA_DINC_FIXED)) + { + status = HAL_DMA_Start_IT(hxspi->hdmatx, (uint32_t)pData, (uint32_t)&hxspi->Instance->DR, hxspi->XferSize); + } + else + { + /* no transmit possible with DMA peripheral, invalid configuration */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + if (status == HAL_OK) + { + /* Enable the transfer error interrupt */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TE); + + /* Enable the DMA transfer by setting the DMAEN bit */ + SET_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hxspi : XSPI handle + * @param pData : pointer to data buffer. + * @note This function is used only in Indirect Read Mode + * @note If DMA peripheral access is configured as halfword, the number + * of data and the fifo threshold should be aligned on halfword + * @note If DMA peripheral access is configured as word, the number + * of data and the fifo threshold should be aligned on word + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Receive_DMA(XSPI_HandleTypeDef *hxspi, uint8_t *const pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t data_size = hxspi->Instance->DLR + 1U; + uint32_t addr_reg = hxspi->Instance->AR; + uint32_t ir_reg = hxspi->Instance->IR; + DMA_QListTypeDef *p_queue = {NULL}; + uint32_t data_width = DMA_DEST_DATAWIDTH_BYTE; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + if ((hxspi->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + p_queue = hxspi->hdmarx->LinkedListQueue; + if ((p_queue != NULL) && (p_queue->Head != NULL)) + { + data_width = p_queue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET] & DMA_CTR1_DDW_LOG2; + } + else + { + /* Set Error Code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + + /* Return function status */ + status = HAL_ERROR; + } + } + else + { + data_width = hxspi->hdmarx->Init.DestDataWidth; + } + + /* Configure counters and size */ + if (data_width == DMA_DEST_DATAWIDTH_BYTE) + { + hxspi->XferCount = data_size; + } + else if (data_width == DMA_DEST_DATAWIDTH_HALFWORD) + { + if (((data_size % 2U) != 0U) || ((hxspi->Init.FifoThresholdByte % 2U) != 0U)) + { + /* The number of data or the fifo threshold is not aligned on halfword + => no transfer possible with DMA peripheral access configured as halfword */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + hxspi->XferCount = data_size; + } + } + else if (data_width == DMA_DEST_DATAWIDTH_WORD) + { + if (((data_size % 4U) != 0U) || ((hxspi->Init.FifoThresholdByte % 4U) != 0U)) + { + /* The number of data or the fifo threshold is not aligned on word + => no transfer possible with DMA peripheral access configured as word */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + else + { + hxspi->XferCount = data_size; + } + } + else + { + /* Nothing to do */ + } + + if (status == HAL_OK) + { + hxspi->XferSize = hxspi->XferCount; + hxspi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, XSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_TC); + + /* Update the state */ + hxspi->State = HAL_XSPI_STATE_BUSY_RX; + + /* Set the DMA transfer complete callback */ + hxspi->hdmarx->XferCpltCallback = XSPI_DMACplt; + + /* Set the DMA Half transfer complete callback */ + hxspi->hdmarx->XferHalfCpltCallback = XSPI_DMAHalfCplt; + + /* Set the DMA error callback */ + hxspi->hdmarx->XferErrorCallback = XSPI_DMAError; + + /* Clear the DMA abort callback */ + hxspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the receive DMA Channel */ + if ((hxspi->hdmarx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) + { + if (hxspi->hdmarx->LinkedListQueue != NULL) + { + /* Enable the DMA channel */ + MODIFY_REG(p_queue->Head->LinkRegisters[NODE_CTR1_DEFAULT_OFFSET], \ + (DMA_CTR1_SINC | DMA_CTR1_DINC), (DMA_SINC_FIXED | DMA_DINC_INCREMENTED)); + MODIFY_REG(p_queue->Head->LinkRegisters[NODE_CTR2_DEFAULT_OFFSET], \ + DMA_CTR2_DREQ, DMA_PERIPH_TO_MEMORY); + /* Set DMA data size */ + p_queue->Head->LinkRegisters[NODE_CBR1_DEFAULT_OFFSET] = hxspi->XferSize; + /* Set DMA source address */ + p_queue->Head->LinkRegisters[NODE_CSAR_DEFAULT_OFFSET] = (uint32_t)&hxspi->Instance->DR; + /* Set DMA destination address */ + p_queue->Head->LinkRegisters[NODE_CDAR_DEFAULT_OFFSET] = (uint32_t)pData; + + status = HAL_DMAEx_List_Start_IT(hxspi->hdmarx); + } + else + { + /* Set Error Code */ + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + + hxspi->State = HAL_XSPI_STATE_READY; + + /* Return function status */ + status = HAL_ERROR; + } + } + else + { + if ((hxspi->hdmarx->Init.Direction == DMA_PERIPH_TO_MEMORY) && (hxspi->hdmarx->Init.SrcInc == DMA_SINC_FIXED) + && (hxspi->hdmarx->Init.DestInc == DMA_DINC_INCREMENTED)) + { + status = HAL_DMA_Start_IT(hxspi->hdmarx, (uint32_t)&hxspi->Instance->DR, (uint32_t)pData, hxspi->XferSize); + } + else + { + /* no receive possible with DMA peripheral, invalid configuration */ + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + if (status == HAL_OK) + { + /* Enable the transfer error interrupt */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hxspi->Instance->CCR, XSPI_CCR_ADMODE) != HAL_XSPI_ADDRESS_NONE) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hxspi->Instance->IR, ir_reg); + } + } + + /* Enable the DMA transfer by setting the DMAEN bit */ + SET_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + + return status; +} + +/** + * @brief Configure the XSPI Automatic Polling Mode in blocking mode. + * @param hxspi : XSPI handle + * @param pCfg : Pointer to structure that contains the polling configuration information. + * @param Timeout : Timeout duration + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_AutoPolling(XSPI_HandleTypeDef *hxspi, XSPI_AutoPollingTypeDef *const pCfg, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + uint32_t addr_reg = hxspi->Instance->AR; + uint32_t ir_reg = hxspi->Instance->IR; +#ifdef USE_FULL_ASSERT + uint32_t dlr_reg = hxspi->Instance->DLR; +#endif /* USE_FULL_ASSERT */ + + /* Check the parameters of the autopolling configuration structure */ + assert_param(IS_XSPI_MATCH_MODE(pCfg->MatchMode)); + assert_param(IS_XSPI_AUTOMATIC_STOP(pCfg->AutomaticStop)); + assert_param(IS_XSPI_INTERVAL(pCfg->IntervalTime)); + assert_param(IS_XSPI_STATUS_BYTES_SIZE(dlr_reg + 1U)); + + /* Check the state */ + if ((hxspi->State == HAL_XSPI_STATE_CMD_CFG) && (pCfg->AutomaticStop == HAL_XSPI_AUTOMATIC_STOP_ENABLE)) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Configure registers */ + WRITE_REG(hxspi->Instance->PSMAR, pCfg->MatchValue); + WRITE_REG(hxspi->Instance->PSMKR, pCfg->MatchMask); + WRITE_REG(hxspi->Instance->PIR, pCfg->IntervalTime); + MODIFY_REG(hxspi->Instance->CR, (XSPI_CR_PMM | XSPI_CR_APMS | XSPI_CR_FMODE), + (pCfg->MatchMode | pCfg->AutomaticStop | XSPI_FUNCTIONAL_MODE_AUTO_POLLING)); + + /* Trig the transfer by re-writing address or instruction register */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hxspi->Instance->CCR, XSPI_CCR_ADMODE) != HAL_XSPI_ADDRESS_NONE) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hxspi->Instance->IR, ir_reg); + } + } + + /* Wait till status match flag is set to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_SM, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear status match flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_SM); + + hxspi->State = HAL_XSPI_STATE_READY; + } + } + else + { + status = HAL_BUSY; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Configure the XSPI Automatic Polling Mode in non-blocking mode. + * @param hxspi : XSPI handle + * @param pCfg : Pointer to structure that contains the polling configuration information. + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_AutoPolling_IT(XSPI_HandleTypeDef *hxspi, XSPI_AutoPollingTypeDef *const pCfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + uint32_t addr_reg = hxspi->Instance->AR; + uint32_t ir_reg = hxspi->Instance->IR; +#ifdef USE_FULL_ASSERT + uint32_t dlr_reg = hxspi->Instance->DLR; +#endif /* USE_FULL_ASSERT */ + + /* Check the parameters of the autopolling configuration structure */ + assert_param(IS_XSPI_MATCH_MODE(pCfg->MatchMode)); + assert_param(IS_XSPI_AUTOMATIC_STOP(pCfg->AutomaticStop)); + assert_param(IS_XSPI_INTERVAL(pCfg->IntervalTime)); + assert_param(IS_XSPI_STATUS_BYTES_SIZE(dlr_reg + 1U)); + + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + /* Configure registers */ + WRITE_REG(hxspi->Instance->PSMAR, pCfg->MatchValue); + WRITE_REG(hxspi->Instance->PSMKR, pCfg->MatchMask); + WRITE_REG(hxspi->Instance->PIR, pCfg->IntervalTime); + MODIFY_REG(hxspi->Instance->CR, (XSPI_CR_PMM | XSPI_CR_APMS | XSPI_CR_FMODE), + (pCfg->MatchMode | pCfg->AutomaticStop | XSPI_FUNCTIONAL_MODE_AUTO_POLLING)); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TE | HAL_XSPI_FLAG_SM); + + hxspi->State = HAL_XSPI_STATE_BUSY_AUTO_POLLING; + + /* Enable the status match and transfer error interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_SM | HAL_XSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hxspi->Init.MemoryType == HAL_XSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hxspi->Instance->CCR, XSPI_CCR_ADMODE) != HAL_XSPI_ADDRESS_NONE) + { + WRITE_REG(hxspi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hxspi->Instance->IR, ir_reg); + } + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Configure the Memory Mapped mode. + * @param hxspi : XSPI handle + * @param pCfg : Pointer to structure that contains the memory mapped configuration information. + * @note This function is used only in Memory mapped Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_MemoryMapped(XSPI_HandleTypeDef *hxspi, XSPI_MemoryMappedTypeDef *const pCfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the memory-mapped configuration structure */ + assert_param(IS_XSPI_TIMEOUT_ACTIVATION(pCfg->TimeOutActivation)); + + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_CMD_CFG) + { + /* Wait till busy flag is reset */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + hxspi->State = HAL_XSPI_STATE_BUSY_MEM_MAPPED; + + if (pCfg->TimeOutActivation == HAL_XSPI_TIMEOUT_COUNTER_ENABLE) + { + assert_param(IS_XSPI_TIMEOUT_PERIOD(pCfg->TimeoutPeriodClock)); + + /* Configure register */ + WRITE_REG(hxspi->Instance->LPTR, pCfg->TimeoutPeriodClock); + + /* Clear flags related to interrupt */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TO); + + /* Enable the timeout interrupt */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TO); + } + + /* Configure CR register with functional mode as memory-mapped */ + MODIFY_REG(hxspi->Instance->CR, (XSPI_CR_TCEN | XSPI_CR_FMODE), + (pCfg->TimeOutActivation | XSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)); + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Transfer Error callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_ErrorCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Abort completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_AbortCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @brief FIFO Threshold callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_FifoThresholdCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_FIFOThresholdCallback could be implemented in the user file + */ +} + +/** + * @brief Command completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_CmdCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_CmdCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_RxCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_TxCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_RxHalfCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_TxHalfCpltCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_XSPI_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Status Match callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_StatusMatchCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_StatusMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout callback. + * @param hxspi : XSPI handle + * @retval None + */ +__weak void HAL_XSPI_TimeOutCallback(XSPI_HandleTypeDef *hxspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hxspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_XSPI_TimeOutCallback could be implemented in the user file + */ +} + +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User XSPI Callback + * To be used to override the weak predefined callback + * @param hxspi : XSPI handle + * @param CallbackID : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_XSPI_ERROR_CB_ID XSPI Error Callback ID + * @arg @ref HAL_XSPI_ABORT_CB_ID XSPI Abort Callback ID + * @arg @ref HAL_XSPI_FIFO_THRESHOLD_CB_ID XSPI FIFO Threshold Callback ID + * @arg @ref HAL_XSPI_CMD_CPLT_CB_ID XSPI Command Complete Callback ID + * @arg @ref HAL_XSPI_RX_CPLT_CB_ID XSPI Rx Complete Callback ID + * @arg @ref HAL_XSPI_TX_CPLT_CB_ID XSPI Tx Complete Callback ID + * @arg @ref HAL_XSPI_RX_HALF_CPLT_CB_ID XSPI Rx Half Complete Callback ID + * @arg @ref HAL_XSPI_TX_HALF_CPLT_CB_ID XSPI Tx Half Complete Callback ID + * @arg @ref HAL_XSPI_STATUS_MATCH_CB_ID XSPI Status Match Callback ID + * @arg @ref HAL_XSPI_TIMEOUT_CB_ID XSPI Timeout Callback ID + * @arg @ref HAL_XSPI_MSP_INIT_CB_ID XSPI MspInit callback ID + * @arg @ref HAL_XSPI_MSP_DEINIT_CB_ID XSPI MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_XSPI_RegisterCallback(XSPI_HandleTypeDef *hxspi, HAL_XSPI_CallbackIDTypeDef CallbackID, + pXSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hxspi->State == HAL_XSPI_STATE_READY) + { + switch (CallbackID) + { + case HAL_XSPI_ERROR_CB_ID : + hxspi->ErrorCallback = pCallback; + break; + case HAL_XSPI_ABORT_CB_ID : + hxspi->AbortCpltCallback = pCallback; + break; + case HAL_XSPI_FIFO_THRESHOLD_CB_ID : + hxspi->FifoThresholdCallback = pCallback; + break; + case HAL_XSPI_CMD_CPLT_CB_ID : + hxspi->CmdCpltCallback = pCallback; + break; + case HAL_XSPI_RX_CPLT_CB_ID : + hxspi->RxCpltCallback = pCallback; + break; + case HAL_XSPI_TX_CPLT_CB_ID : + hxspi->TxCpltCallback = pCallback; + break; + case HAL_XSPI_RX_HALF_CPLT_CB_ID : + hxspi->RxHalfCpltCallback = pCallback; + break; + case HAL_XSPI_TX_HALF_CPLT_CB_ID : + hxspi->TxHalfCpltCallback = pCallback; + break; + case HAL_XSPI_STATUS_MATCH_CB_ID : + hxspi->StatusMatchCallback = pCallback; + break; + case HAL_XSPI_TIMEOUT_CB_ID : + hxspi->TimeOutCallback = pCallback; + break; + case HAL_XSPI_MSP_INIT_CB_ID : + hxspi->MspInitCallback = pCallback; + break; + case HAL_XSPI_MSP_DEINIT_CB_ID : + hxspi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hxspi->State == HAL_XSPI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_XSPI_MSP_INIT_CB_ID : + hxspi->MspInitCallback = pCallback; + break; + case HAL_XSPI_MSP_DEINIT_CB_ID : + hxspi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User XSPI Callback + * XSPI Callback is redirected to the weak predefined callback + * @param hxspi : XSPI handle + * @param CallbackID : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_XSPI_ERROR_CB_ID XSPI Error Callback ID + * @arg @ref HAL_XSPI_ABORT_CB_ID XSPI Abort Callback ID + * @arg @ref HAL_XSPI_FIFO_THRESHOLD_CB_ID XSPI FIFO Threshold Callback ID + * @arg @ref HAL_XSPI_CMD_CPLT_CB_ID XSPI Command Complete Callback ID + * @arg @ref HAL_XSPI_RX_CPLT_CB_ID XSPI Rx Complete Callback ID + * @arg @ref HAL_XSPI_TX_CPLT_CB_ID XSPI Tx Complete Callback ID + * @arg @ref HAL_XSPI_RX_HALF_CPLT_CB_ID XSPI Rx Half Complete Callback ID + * @arg @ref HAL_XSPI_TX_HALF_CPLT_CB_ID XSPI Tx Half Complete Callback ID + * @arg @ref HAL_XSPI_STATUS_MATCH_CB_ID XSPI Status Match Callback ID + * @arg @ref HAL_XSPI_TIMEOUT_CB_ID XSPI Timeout Callback ID + * @arg @ref HAL_XSPI_MSP_INIT_CB_ID XSPI MspInit callback ID + * @arg @ref HAL_XSPI_MSP_DEINIT_CB_ID XSPI MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_XSPI_UnRegisterCallback(XSPI_HandleTypeDef *hxspi, HAL_XSPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hxspi->State == HAL_XSPI_STATE_READY) + { + switch (CallbackID) + { + case HAL_XSPI_ERROR_CB_ID : + hxspi->ErrorCallback = HAL_XSPI_ErrorCallback; + break; + case HAL_XSPI_ABORT_CB_ID : + hxspi->AbortCpltCallback = HAL_XSPI_AbortCpltCallback; + break; + case HAL_XSPI_FIFO_THRESHOLD_CB_ID : + hxspi->FifoThresholdCallback = HAL_XSPI_FifoThresholdCallback; + break; + case HAL_XSPI_CMD_CPLT_CB_ID : + hxspi->CmdCpltCallback = HAL_XSPI_CmdCpltCallback; + break; + case HAL_XSPI_RX_CPLT_CB_ID : + hxspi->RxCpltCallback = HAL_XSPI_RxCpltCallback; + break; + case HAL_XSPI_TX_CPLT_CB_ID : + hxspi->TxCpltCallback = HAL_XSPI_TxCpltCallback; + break; + case HAL_XSPI_RX_HALF_CPLT_CB_ID : + hxspi->RxHalfCpltCallback = HAL_XSPI_RxHalfCpltCallback; + break; + case HAL_XSPI_TX_HALF_CPLT_CB_ID : + hxspi->TxHalfCpltCallback = HAL_XSPI_TxHalfCpltCallback; + break; + case HAL_XSPI_STATUS_MATCH_CB_ID : + hxspi->StatusMatchCallback = HAL_XSPI_StatusMatchCallback; + break; + case HAL_XSPI_TIMEOUT_CB_ID : + hxspi->TimeOutCallback = HAL_XSPI_TimeOutCallback; + break; + case HAL_XSPI_MSP_INIT_CB_ID : + hxspi->MspInitCallback = HAL_XSPI_MspInit; + break; + case HAL_XSPI_MSP_DEINIT_CB_ID : + hxspi->MspDeInitCallback = HAL_XSPI_MspDeInit; + break; + default : + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hxspi->State == HAL_XSPI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_XSPI_MSP_INIT_CB_ID : + hxspi->MspInitCallback = HAL_XSPI_MspInit; + break; + case HAL_XSPI_MSP_DEINIT_CB_ID : + hxspi->MspDeInitCallback = HAL_XSPI_MspDeInit; + break; + default : + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hxspi->ErrorCode |= HAL_XSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + +/** + * @} + */ + +/** @defgroup XSPI_Exported_Functions_Group3 Peripheral Control and State functions + * @brief XSPI control and State functions + * +@verbatim + =============================================================================== + ##### Peripheral Control and State functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Check in run-time the state of the driver. + (+) Check the error code set during last operation. + (+) Abort any operation. + (+) Manage the Fifo threshold. + (+) Configure the timeout duration used in the driver. + +@endverbatim + * @{ + */ + +/** + * @brief Abort the current operation, return to the indirect mode. + * @param hxspi : XSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Abort(XSPI_HandleTypeDef *hxspi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check if the state is in one of the busy or configured states */ + state = hxspi->State; + if (((state & XSPI_BUSY_STATE_MASK) != 0U) || ((state & XSPI_CFG_STATE_MASK) != 0U)) + { + /* Check if the DMA is enabled */ + if ((hxspi->Instance->CR & XSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the XSPI side */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + + /* Disable the DMA transmit on the DMA side */ + status = HAL_DMA_Abort(hxspi->hdmatx); + if (status != HAL_OK) + { + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + } + + /* Disable the DMA receive on the DMA side */ + status = HAL_DMA_Abort(hxspi->hdmarx); + if (status != HAL_OK) + { + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + } + } + + if (HAL_XSPI_GET_FLAG(hxspi, HAL_XSPI_FLAG_BUSY) != RESET) + { + /* Perform an abort of the XSPI */ + SET_BIT(hxspi->Instance->CR, XSPI_CR_ABORT); + + /* Wait until the transfer complete flag is set to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_TC, SET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + + /* Wait until the busy flag is reset to go back in idle state */ + status = XSPI_WaitFlagStateUntilTimeout(hxspi, HAL_XSPI_FLAG_BUSY, RESET, tickstart, hxspi->Timeout); + + if (status == HAL_OK) + { + /* Return to indirect mode */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_FMODE); + + hxspi->State = HAL_XSPI_STATE_READY; + } + } + } + else + { + /* Return to indirect mode */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_FMODE); + + hxspi->State = HAL_XSPI_STATE_READY; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** + * @brief Abort the current operation, return to the indirect mode. (non-blocking function) + * @param hxspi : XSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_Abort_IT(XSPI_HandleTypeDef *hxspi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t state; + + /* Check if the state is in one of the busy or configured states */ + state = hxspi->State; + if (((state & XSPI_BUSY_STATE_MASK) != 0U) || ((state & XSPI_CFG_STATE_MASK) != 0U)) + { + /* Disable all interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, (HAL_XSPI_IT_TO | HAL_XSPI_IT_SM | HAL_XSPI_IT_FT | HAL_XSPI_IT_TC | HAL_XSPI_IT_TE)); + + hxspi->State = HAL_XSPI_STATE_ABORT; + + /* Check if the DMA is enabled */ + if ((hxspi->Instance->CR & XSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the XSPI side */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + + /* Disable the DMA transmit on the DMA side */ + hxspi->hdmatx->XferAbortCallback = XSPI_DMAAbortCplt; + if (HAL_DMA_Abort_IT(hxspi->hdmatx) != HAL_OK) + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->AbortCpltCallback(hxspi); +#else + HAL_XSPI_AbortCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + + /* Disable the DMA receive on the DMA side */ + hxspi->hdmarx->XferAbortCallback = XSPI_DMAAbortCplt; + if (HAL_DMA_Abort_IT(hxspi->hdmarx) != HAL_OK) + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->AbortCpltCallback(hxspi); +#else + HAL_XSPI_AbortCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + if (HAL_XSPI_GET_FLAG(hxspi, HAL_XSPI_FLAG_BUSY) != RESET) + { + /* Clear transfer complete flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + + /* Enable the transfer complete interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC); + + /* Perform an abort of the XSPI */ + SET_BIT(hxspi->Instance->CR, XSPI_CR_ABORT); + + /* Return to indirect mode */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_FMODE); + } + else + { + /* Return to indirect mode */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_FMODE); + + hxspi->State = HAL_XSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->AbortCpltCallback(hxspi); +#else + HAL_XSPI_AbortCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** @brief Set XSPI Fifo threshold. + * @param hxspi : XSPI handle. + * @param Threshold : Threshold of the Fifo. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_SetFifoThreshold(XSPI_HandleTypeDef *hxspi, uint32_t Threshold) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_XSPI_FIFO_THRESHOLD_BYTE(Threshold)); + + /* Check the state */ + if ((hxspi->State & XSPI_BUSY_STATE_MASK) == 0U) + { + /* Synchronize initialization structure with the new fifo threshold value */ + hxspi->Init.FifoThresholdByte = Threshold; + + /* Configure new fifo threshold */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FTHRES, ((hxspi->Init.FifoThresholdByte - 1U) << XSPI_CR_FTHRES_Pos)); + + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** @brief Get XSPI Fifo threshold. + * @param hxspi : XSPI handle. + * @retval Fifo threshold + */ +uint32_t HAL_XSPI_GetFifoThreshold(const XSPI_HandleTypeDef *hxspi) +{ + return ((READ_BIT(hxspi->Instance->CR, XSPI_CR_FTHRES) >> XSPI_CR_FTHRES_Pos) + 1U); +} + +/** @brief Set XSPI Memory Type. + * @param hxspi : XSPI handle. + * @param Type : Memory Type. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_SetMemoryType(XSPI_HandleTypeDef *hxspi, uint32_t Type) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_XSPI_MEMORY_TYPE(Type)); + + /* Check the state */ + if ((hxspi->State & XSPI_BUSY_STATE_MASK) == 0U) + { + /* Synchronize initialization structure with the new memory type value */ + hxspi->Init.MemoryType = Type; + + /* Configure new memory type */ + MODIFY_REG(hxspi->Instance->DCR1, XSPI_DCR1_MTYP, hxspi->Init.MemoryType); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** @brief Set XSPI Device Size. + * @param hxspi : XSPI handle. + * @param Size : Device Size. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_SetDeviceSize(XSPI_HandleTypeDef *hxspi, uint32_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_XSPI_MEMORY_SIZE(Size)); + + /* Check the state */ + if ((hxspi->State & XSPI_BUSY_STATE_MASK) == 0U) + { + /* Synchronize initialization structure with the new device size value */ + hxspi->Init.MemorySize = Size; + + /* Configure new device size */ + MODIFY_REG(hxspi->Instance->DCR1, XSPI_DCR1_DEVSIZE, + (hxspi->Init.MemorySize << XSPI_DCR1_DEVSIZE_Pos)); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** @brief Set XSPI Clock prescaler. + * @param hxspi : XSPI handle. + * @param Prescaler : Clock prescaler. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_SetClockPrescaler(XSPI_HandleTypeDef *hxspi, uint32_t Prescaler) +{ + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_XSPI_CLK_PRESCALER(Prescaler)); + + /* Check the state */ + if ((hxspi->State & XSPI_BUSY_STATE_MASK) == 0U) + { + /* Synchronize initialization structure with the new clock prescaler value */ + hxspi->Init.ClockPrescaler = Prescaler; + + /* Configure clock prescaler */ + MODIFY_REG(hxspi->Instance->DCR2, XSPI_DCR2_PRESCALER, + ((hxspi->Init.ClockPrescaler) << XSPI_DCR2_PRESCALER_Pos)); + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + + return status; +} + +/** @brief Set XSPI timeout. + * @param hxspi : XSPI handle. + * @param Timeout : Timeout for the memory access. + * @retval HAL state + */ +HAL_StatusTypeDef HAL_XSPI_SetTimeout(XSPI_HandleTypeDef *hxspi, uint32_t Timeout) +{ + hxspi->Timeout = Timeout; + return HAL_OK; +} + +/** + * @brief Return the XSPI error code. + * @param hxspi : XSPI handle + * @retval XSPI Error Code + */ +uint32_t HAL_XSPI_GetError(const XSPI_HandleTypeDef *hxspi) +{ + return hxspi->ErrorCode; +} + +/** + * @brief Return the XSPI handle state. + * @param hxspi : XSPI handle + * @retval HAL state + */ +uint32_t HAL_XSPI_GetState(const XSPI_HandleTypeDef *hxspi) +{ + /* Return XSPI handle state */ + return hxspi->State; +} + +/** + * @} + */ + +/** @defgroup XSPI_Exported_Functions_Group4 IO Manager configuration function + * @brief XSPI IO Manager configuration function + * +@verbatim + =============================================================================== + ##### IO Manager configuration function ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Configure the IO manager. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the XSPI IO manager. + * @param hxspi : XSPI handle + * @param pCfg : Pointer to Configuration of the IO Manager for the instance + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPIM_Config(XSPI_HandleTypeDef *const hxspi, XSPIM_CfgTypeDef *const pCfg, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint8_t index; + uint8_t xspi_enabled = 0U; + + XSPIM_CfgTypeDef IOM_cfg[XSPI_NB_INSTANCE] = {0}; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Timeout); + + /* Check the parameters of the XSPI IO Manager configuration structure */ + assert_param(IS_XSPIM_NCS_OVR(pCfg->nCSOverride)); + assert_param(IS_XSPIM_IO_PORT(pCfg->IOPort)); + assert_param(IS_XSPIM_REQ2ACKTIME(pCfg->Req2AckTime)); + + /**************** Get current configuration of the instances ****************/ + for (index = 0U; index < XSPI_NB_INSTANCE; index++) + { + XSPIM_GetConfig(index + 1U, &(IOM_cfg[index])); + } + + /********** Disable both XSPI to configure XSPI IO Manager **********/ + if ((XSPI1->CR & XSPI_CR_EN) != 0U) + { + CLEAR_BIT(XSPI1->CR, XSPI_CR_EN); + xspi_enabled |= 0x1U; + } + if ((XSPI2->CR & XSPI_CR_EN) != 0U) + { + CLEAR_BIT(XSPI2->CR, XSPI_CR_EN); + xspi_enabled |= 0x2U; + } + + /***************** Deactivation of previous configuration *****************/ + CLEAR_REG(XSPIM->CR); + + /******************** Activation of new configuration *********************/ + MODIFY_REG(XSPIM->CR, XSPIM_CR_REQ2ACK_TIME, ((pCfg->Req2AckTime - 1U) << XSPIM_CR_REQ2ACK_TIME_Pos)); + + if (hxspi->Instance == XSPI1) + { + IOM_cfg[0].IOPort = pCfg->IOPort ; + if (pCfg->nCSOverride != HAL_XSPI_CSSEL_OVR_DISABLED) + { + MODIFY_REG(XSPIM->CR, (XSPIM_CR_CSSEL_OVR_O1 | XSPIM_CR_CSSEL_OVR_EN), (pCfg->nCSOverride)); + } + else + { + /* Nothing to do */ + } + } + else if (hxspi->Instance == XSPI2) + { + IOM_cfg[1].IOPort = pCfg->IOPort ; + if (pCfg->nCSOverride != HAL_XSPI_CSSEL_OVR_DISABLED) + { + MODIFY_REG(XSPIM->CR, (XSPIM_CR_CSSEL_OVR_O2 | XSPIM_CR_CSSEL_OVR_EN), (pCfg->nCSOverride)); + } + else + { + /* Nothing to do */ + } + } + else + { + return HAL_ERROR; + } + + for (index = 0U; index < (XSPI_NB_INSTANCE - 1U); index++) + { + if ((IOM_cfg[index].IOPort == IOM_cfg[index + 1U].IOPort)) + { + /*Mux*/ + SET_BIT(XSPIM->CR, XSPIM_CR_MUXEN); + } + else + { + /* Nothing to do */ + } + if (IOM_cfg[0].IOPort == HAL_XSPIM_IOPORT_2) + { + /*Mode*/ + SET_BIT(XSPIM->CR, XSPIM_CR_MODE); + } + else + { + /* Nothing to do */ + } + } + + /******* Re-enable both XSPI after configure XSPI IO Manager ********/ + if ((xspi_enabled & 0x1U) != 0U) + { + SET_BIT(XSPI1->CR, XSPI_CR_EN); + } + if ((xspi_enabled & 0x2U) != 0U) + { + SET_BIT(XSPI2->CR, XSPI_CR_EN); + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup XSPI_Exported_Functions_Group6 High-speed interface and calibration functions + * @brief XSPI high-speed interface and calibration functions + * +@verbatim + =============================================================================== + ##### High-speed interface and calibration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Get the delay values of the high-speed interface DLLs. + (+) Set a delay value for the high-speed interface DLLs. + +@endverbatim + * @{ + */ + +/** + * @brief Get the delay values of the high-speed interface DLLs. + * @param hxspi : XSPI handle + * @param pCfg : Current delay values corresponding to the DelayValueType field. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_GetDelayValue(XSPI_HandleTypeDef *hxspi, XSPI_HSCalTypeDef *const pCfg) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t reg = 0; + + if (IS_XSPI_ALL_INSTANCE(hxspi->Instance)) + { + /* Check the parameter specified in the structure */ + assert_param(IS_XSPI_DELAY_TYPE(pCfg->DelayValueType)); + + switch (pCfg->DelayValueType) + { + case HAL_XSPI_CAL_FULL_CYCLE_DELAY: + reg = hxspi->Instance->CALFCR; + pCfg->MaxCalibration = (reg & XSPI_CALFCR_CALMAX); + break; + case HAL_XSPI_CAL_FEEDBACK_CLK_DELAY: + reg = hxspi->Instance->CALMR; + break; + case HAL_XSPI_CAL_DATA_OUTPUT_DELAY: + reg = hxspi->Instance->CALSOR; + break; + case HAL_XSPI_CAL_DQS_INPUT_DELAY: + reg = hxspi->Instance->CALSIR; + break; + default: + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + break; + } + + if (status == HAL_OK) + { + pCfg->FineCalibrationUnit = (reg & XSPI_CALFCR_FINE); + pCfg->CoarseCalibrationUnit = ((reg & XSPI_CALFCR_COARSE) >> XSPI_CALFCR_COARSE_Pos); + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + + return status; +} + +/** + * @brief Set a delay value for the high-speed interface DLLs. + * @param hxspi : XSPI handle + * @param pCfg : Configuration of delay value specified in DelayValueType field. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_XSPI_SetDelayValue(XSPI_HandleTypeDef *hxspi, XSPI_HSCalTypeDef *const pCfg) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (IS_XSPI_ALL_INSTANCE(hxspi->Instance)) + { + /* Check the parameter specified in the structure */ + assert_param(IS_XSPI_DELAY_TYPE(pCfg->DelayValueType)); + assert_param(IS_XSPI_FINECAL_VALUE(pCfg->FineCalibrationUnit)); + assert_param(IS_XSPI_COARSECAL_VALUE(pCfg->CoarseCalibrationUnit)); + + /* Check if the state isn't in one of the busy states */ + if ((hxspi->State & XSPI_BUSY_STATE_MASK) == 0U) + { + switch (pCfg->DelayValueType) + { + case HAL_XSPI_CAL_FEEDBACK_CLK_DELAY: + MODIFY_REG(hxspi->Instance->CALMR, (XSPI_CALMR_COARSE | XSPI_CALMR_FINE), + (pCfg->FineCalibrationUnit | (pCfg->CoarseCalibrationUnit << XSPI_CALMR_COARSE_Pos))); + break; + case HAL_XSPI_CAL_DATA_OUTPUT_DELAY: + MODIFY_REG(hxspi->Instance->CALSOR, (XSPI_CALSOR_COARSE | XSPI_CALSOR_FINE), + (pCfg->FineCalibrationUnit | (pCfg->CoarseCalibrationUnit << XSPI_CALSOR_COARSE_Pos))); + break; + case HAL_XSPI_CAL_DQS_INPUT_DELAY: + MODIFY_REG(hxspi->Instance->CALSIR, (XSPI_CALSIR_COARSE | XSPI_CALSIR_FINE), + (pCfg->FineCalibrationUnit | (pCfg->CoarseCalibrationUnit << XSPI_CALSIR_COARSE_Pos))); + break; + default: + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + break; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_SEQUENCE; + } + } + else + { + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + + return status; +} + +/** + * @} + */ + +/** + @cond 0 + */ +/** + * @brief DMA XSPI process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void XSPI_DMACplt(DMA_HandleTypeDef *hdma) +{ + XSPI_HandleTypeDef *hxspi = (XSPI_HandleTypeDef *)(hdma->Parent); + hxspi->XferCount = 0; + + /* Disable the DMA transfer on the XSPI side */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + + /* Enable the XSPI transfer complete Interrupt */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC); +} + +/** + * @brief DMA XSPI process half complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void XSPI_DMAHalfCplt(DMA_HandleTypeDef *hdma) +{ + XSPI_HandleTypeDef *hxspi = (XSPI_HandleTypeDef *)(hdma->Parent); + hxspi->XferCount = (hxspi->XferCount >> 1); + + if (hxspi->State == HAL_XSPI_STATE_BUSY_RX) + { +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->RxHalfCpltCallback(hxspi); +#else + HAL_XSPI_RxHalfCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->TxHalfCpltCallback(hxspi); +#else + HAL_XSPI_TxHalfCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } +} + +/** + * @brief DMA XSPI communication error callback. + * @param hdma : DMA handle + * @retval None + */ +static void XSPI_DMAError(DMA_HandleTypeDef *hdma) +{ + XSPI_HandleTypeDef *hxspi = (XSPI_HandleTypeDef *)(hdma->Parent); + hxspi->XferCount = 0; + hxspi->ErrorCode = HAL_XSPI_ERROR_DMA; + + /* Disable the DMA transfer on the XSPI side */ + CLEAR_BIT(hxspi->Instance->CR, XSPI_CR_DMAEN); + + /* Abort the XSPI */ + if (HAL_XSPI_Abort_IT(hxspi) != HAL_OK) + { + /* Disable the interrupts */ + HAL_XSPI_DISABLE_IT(hxspi, HAL_XSPI_IT_TC | HAL_XSPI_IT_FT | HAL_XSPI_IT_TE); + + hxspi->State = HAL_XSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } +} + +/** + * @brief DMA XSPI abort complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void XSPI_DMAAbortCplt(DMA_HandleTypeDef *hdma) +{ + XSPI_HandleTypeDef *hxspi = (XSPI_HandleTypeDef *)(hdma->Parent); + hxspi->XferCount = 0; + + /* Check the state */ + if (hxspi->State == HAL_XSPI_STATE_ABORT) + { + /* DMA abort called by XSPI abort */ + if (HAL_XSPI_GET_FLAG(hxspi, HAL_XSPI_FLAG_BUSY) != RESET) + { + /* Clear transfer complete flag */ + HAL_XSPI_CLEAR_FLAG(hxspi, HAL_XSPI_FLAG_TC); + + /* Enable the transfer complete interrupts */ + HAL_XSPI_ENABLE_IT(hxspi, HAL_XSPI_IT_TC); + + /* Perform an abort of the XSPI */ + SET_BIT(hxspi->Instance->CR, XSPI_CR_ABORT); + } + else + { + hxspi->State = HAL_XSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->AbortCpltCallback(hxspi); +#else + HAL_XSPI_AbortCpltCallback(hxspi); +#endif /* (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + /* DMA abort called due to a transfer error interrupt */ + hxspi->State = HAL_XSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) + hxspi->ErrorCallback(hxspi); +#else + HAL_XSPI_ErrorCallback(hxspi); +#endif /* defined (USE_HAL_XSPI_REGISTER_CALLBACKS) && (USE_HAL_XSPI_REGISTER_CALLBACKS == 1U) */ + } +} + +/** + * @brief Wait for a flag state until timeout. + * @param hxspi : XSPI handle + * @param Flag : Flag checked + * @param State : Value of the flag expected + * @param Timeout : Duration of the timeout + * @param Tickstart : Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef XSPI_WaitFlagStateUntilTimeout(XSPI_HandleTypeDef *hxspi, uint32_t Flag, + FlagStatus State, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is in expected state */ + while ((HAL_XSPI_GET_FLAG(hxspi, Flag)) != State) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hxspi->State = HAL_XSPI_STATE_ERROR; + hxspi->ErrorCode |= HAL_XSPI_ERROR_TIMEOUT; + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the registers for the regular command mode. + * @param hxspi : XSPI handle + * @param pCmd : structure that contains the command configuration information + * @retval HAL status + */ +static HAL_StatusTypeDef XSPI_ConfigCmd(XSPI_HandleTypeDef *hxspi, XSPI_RegularCmdTypeDef *pCmd) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ccr_reg; + __IO uint32_t *tcr_reg; + __IO uint32_t *ir_reg; + __IO uint32_t *abr_reg; + + /* Re-initialize the value of the functional mode */ + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_FMODE, 0U); + + if (hxspi->Init.MemoryMode == HAL_XSPI_SINGLE_MEM) + { + assert_param(IS_XSPI_IO_SELECT(pCmd->IOSelect)); + MODIFY_REG(hxspi->Instance->CR, XSPI_CR_MSEL, pCmd->IOSelect); + } + + if (pCmd->OperationType == HAL_XSPI_OPTYPE_WRITE_CFG) + { + ccr_reg = &(hxspi->Instance->WCCR); + tcr_reg = &(hxspi->Instance->WTCR); + ir_reg = &(hxspi->Instance->WIR); + abr_reg = &(hxspi->Instance->WABR); + } + else if (pCmd->OperationType == HAL_XSPI_OPTYPE_WRAP_CFG) + { + ccr_reg = &(hxspi->Instance->WPCCR); + tcr_reg = &(hxspi->Instance->WPTCR); + ir_reg = &(hxspi->Instance->WPIR); + abr_reg = &(hxspi->Instance->WPABR); + } + else + { + ccr_reg = &(hxspi->Instance->CCR); + tcr_reg = &(hxspi->Instance->TCR); + ir_reg = &(hxspi->Instance->IR); + abr_reg = &(hxspi->Instance->ABR); + } + + /* Configure the CCR register with DQS and SIOO modes */ + *ccr_reg = pCmd->DQSMode; + + if (pCmd->AlternateBytesMode != HAL_XSPI_ALT_BYTES_NONE) + { + /* Configure the ABR register with alternate bytes value */ + *abr_reg = pCmd->AlternateBytes; + + /* Configure the CCR register with alternate bytes communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_ABMODE | XSPI_CCR_ABDTR | XSPI_CCR_ABSIZE), + (pCmd->AlternateBytesMode | pCmd->AlternateBytesDTRMode | pCmd->AlternateBytesWidth)); + } + + /* Configure the TCR register with the number of dummy cycles */ + MODIFY_REG((*tcr_reg), XSPI_TCR_DCYC, pCmd->DummyCycles); + + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + if (pCmd->OperationType == HAL_XSPI_OPTYPE_COMMON_CFG) + { + /* Configure the DLR register with the number of data */ + hxspi->Instance->DLR = (pCmd->DataLength - 1U); + } + } + + if (pCmd->InstructionMode != HAL_XSPI_INSTRUCTION_NONE) + { + if (pCmd->AddressMode != HAL_XSPI_ADDRESS_NONE) + { + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + /* ---- Command with instruction, address and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_IMODE | XSPI_CCR_IDTR | XSPI_CCR_ISIZE | + XSPI_CCR_ADMODE | XSPI_CCR_ADDTR | XSPI_CCR_ADSIZE | + XSPI_CCR_DMODE | XSPI_CCR_DDTR), + (pCmd->InstructionMode | pCmd->InstructionDTRMode | pCmd->InstructionWidth | + pCmd->AddressMode | pCmd->AddressDTRMode | pCmd->AddressWidth | + pCmd->DataMode | pCmd->DataDTRMode)); + } + else + { + /* ---- Command with instruction and address ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_IMODE | XSPI_CCR_IDTR | XSPI_CCR_ISIZE | + XSPI_CCR_ADMODE | XSPI_CCR_ADDTR | XSPI_CCR_ADSIZE), + (pCmd->InstructionMode | pCmd->InstructionDTRMode | pCmd->InstructionWidth | + pCmd->AddressMode | pCmd->AddressDTRMode | pCmd->AddressWidth)); + + /* The DHQC bit is linked with DDTR bit which should be activated */ + if ((hxspi->Init.DelayHoldQuarterCycle == HAL_XSPI_DHQC_ENABLE) && + (pCmd->InstructionDTRMode == HAL_XSPI_INSTRUCTION_DTR_ENABLE)) + { + MODIFY_REG((*ccr_reg), XSPI_CCR_DDTR, HAL_XSPI_DATA_DTR_ENABLE); + } + } + /* Configure the IR register with the instruction value */ + *ir_reg = pCmd->Instruction; + + /* Configure the AR register with the address value */ + hxspi->Instance->AR = pCmd->Address; + } + else + { + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + /* ---- Command with instruction and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_IMODE | XSPI_CCR_IDTR | XSPI_CCR_ISIZE | + XSPI_CCR_DMODE | XSPI_CCR_DDTR), + (pCmd->InstructionMode | pCmd->InstructionDTRMode | pCmd->InstructionWidth | + pCmd->DataMode | pCmd->DataDTRMode)); + } + else + { + /* ---- Command with only instruction ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_IMODE | XSPI_CCR_IDTR | XSPI_CCR_ISIZE), + (pCmd->InstructionMode | pCmd->InstructionDTRMode | pCmd->InstructionWidth)); + + /* The DHQC bit is linked with DDTR bit which should be activated */ + if ((hxspi->Init.DelayHoldQuarterCycle == HAL_XSPI_DHQC_ENABLE) && + (pCmd->InstructionDTRMode == HAL_XSPI_INSTRUCTION_DTR_ENABLE)) + { + MODIFY_REG((*ccr_reg), XSPI_CCR_DDTR, HAL_XSPI_DATA_DTR_ENABLE); + } + } + + /* Configure the IR register with the instruction value */ + *ir_reg = pCmd->Instruction; + + } + } + else + { + if (pCmd->AddressMode != HAL_XSPI_ADDRESS_NONE) + { + if (pCmd->DataMode != HAL_XSPI_DATA_NONE) + { + /* ---- Command with address and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_ADMODE | XSPI_CCR_ADDTR | XSPI_CCR_ADSIZE | + XSPI_CCR_DMODE | XSPI_CCR_DDTR), + (pCmd->AddressMode | pCmd->AddressDTRMode | pCmd->AddressWidth | + pCmd->DataMode | pCmd->DataDTRMode)); + } + else + { + /* ---- Command with only address ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (XSPI_CCR_ADMODE | XSPI_CCR_ADDTR | XSPI_CCR_ADSIZE), + (pCmd->AddressMode | pCmd->AddressDTRMode | pCmd->AddressWidth)); + } + + /* Configure the AR register with the instruction value */ + hxspi->Instance->AR = pCmd->Address; + } + else + { + /* ---- Invalid command configuration (no instruction, no address) ---- */ + status = HAL_ERROR; + hxspi->ErrorCode = HAL_XSPI_ERROR_INVALID_PARAM; + } + } + + return status; +} + +/** + * @brief Get the current IOM configuration for an XSPI instance. + * @param instance_nb : number of the instance + * @param pCfg : configuration of the IO Manager for the instance + * @retval HAL status + */ +static void XSPIM_GetConfig(uint8_t instance_nb, XSPIM_CfgTypeDef *const pCfg) +{ + uint32_t mux; + uint32_t mode; + + if (instance_nb == 1U) + { + if ((XSPIM->CR & XSPIM_CR_MODE) == 0U) + { + pCfg->IOPort = HAL_XSPIM_IOPORT_1; + } + else + { + pCfg->IOPort = HAL_XSPIM_IOPORT_2; + } + + if ((XSPIM->CR & XSPIM_CR_CSSEL_OVR_EN) != XSPIM_CR_CSSEL_OVR_EN) + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_DISABLED; + } + else if ((XSPIM->CR & XSPIM_CR_CSSEL_OVR_O1) == XSPIM_CR_CSSEL_OVR_O1) + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_NCS2; + } + else + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_NCS1; + } + } + else + { + mux = (XSPIM->CR & XSPIM_CR_MUXEN); + mode = ((XSPIM->CR & XSPIM_CR_MODE) >> XSPIM_CR_MODE_Pos); + if (mux != mode) + { + pCfg->IOPort = HAL_XSPIM_IOPORT_1; + } + else + { + pCfg->IOPort = HAL_XSPIM_IOPORT_2; + } + if ((XSPIM->CR & XSPIM_CR_CSSEL_OVR_EN) != XSPIM_CR_CSSEL_OVR_EN) + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_DISABLED; + } + else if ((XSPIM->CR & XSPIM_CR_CSSEL_OVR_O2) == XSPIM_CR_CSSEL_OVR_O2) + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_NCS2; + } + else + { + pCfg->nCSOverride = HAL_XSPI_CSSEL_OVR_NCS1; + } + } +} +/** + @endcond + */ + +/** + * @} + */ + +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* XSPI || XSPI1 || XSPI2 */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_adc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_adc.c new file mode 100644 index 000000000..13408c327 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_adc.c @@ -0,0 +1,1067 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_adc.c + * @author MCD Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_adc.h" +#include "stm32h7rsxx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (ADC1) || defined (ADC2) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +/* Definitions of ADC hardware constraints delays */ +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values: */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Refer to @ref ADC_LL_EC_HW_DELAYS for description of ADC timeout */ +/* values definition. */ +/* Note: ADC timeout values are defined here in CPU cycles to be independent */ +/* of device clock setting. */ +/* In user application, ADC timeout values should be defined with */ +/* temporal values, in function of device clock settings. */ +/* Highest ratio CPU clock frequency vs ADC clock frequency: */ +/* - ADC clock from synchronous clock with AHB prescaler 512, */ +/* ADC prescaler 4. */ +/* Ratio max = 512 *4 = 2048 */ +/* - ADC clock from asynchronous clock (PLLP) with prescaler 256. */ +/* Highest CPU clock PLL (PLLR). */ +/* Ratio max = PLLRmax /PPLPmin * 256 = (VCO/2) / (VCO/31) * 256 */ +/* = 3968 */ +/* Unit: CPU cycles. */ +#define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (3968UL) +#define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + (((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + (((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + (((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM12_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM9_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM6_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM15_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH4) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_LPTIM1_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_LPTIM2_CH1) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_LPTIM3_CH1) \ + ) + +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + (((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + (((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(__REG_OVR_DATA_BEHAVIOR__) \ + (((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_PRESERVED) \ + || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + (((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + (((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group injected */ +#define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ + (((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM9_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM9_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH3) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH1) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM6_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM12_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM15_TRGO) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_LPTIM1_CH2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_LPTIM2_CH2) \ + || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_LPTIM3_CH1) \ + ) + +#define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__) \ + (((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING) \ + || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING) \ + || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING) \ + ) + +#define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__) \ + (((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT) \ + || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR) \ + ) + +#define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__) \ + (((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS) \ + ) + +#define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__) \ + (((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE) \ + || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK) \ + ) + +#if defined(ADC_MULTIMODE_SUPPORT) +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* multimode. */ +#define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ + (((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ + || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ + ) + +#define IS_LL_ADC_MULTI_DMA_TRANSFER(__MULTI_DMA_TRANSFER__) \ + (((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_EACH_ADC) \ + || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_RES12_10B) \ + || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_RES8_6B) \ + || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_RES12_10B) \ + || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_RES8_6B) \ + ) + +#define IS_LL_ADC_MULTI_TWOSMP_DELAY(__MULTI_TWOSMP_DELAY__) \ + (((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) \ + || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) \ + ) + +#define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__) \ + (((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER) \ + || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_SLAVE) \ + || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER_SLAVE) \ + ) + +#endif /* ADC_MULTIMODE_SUPPORT */ +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @note This function is performing a hard reset, using high level + * clock source RCC ADC reset. + * Caution: On this STM32 series, if several ADC instances are available + * on the selected device, RCC ADC reset will reset + * all ADC instances belonging to the common ADC instance. + * To de-initialize only 1 ADC instance, use + * function @ref LL_ADC_DeInit(). + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(const ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Prevent unused argument compilation warning */ + (void)(ADCxy_COMMON); + + /* Force reset of ADC clock (core clock) */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_ADC12); + + /* Release reset of ADC clock (core clock) */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_ADC12); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, const LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(pADC_CommonInitStruct->CommonClock)); + +#if defined(ADC_MULTIMODE_SUPPORT) + assert_param(IS_LL_ADC_MULTI_MODE(pADC_CommonInitStruct->Multimode)); + if (pADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) + { + assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(pADC_CommonInitStruct->MultiDMATransfer)); + assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(pADC_CommonInitStruct->MultiTwoSamplingDelay)); + } +#endif /* ADC_MULTIMODE_SUPPORT */ + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"): */ + /* On this STM32 series, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + /* - multimode (if several ADC instances available on the */ + /* selected device) */ + /* - Set ADC multimode configuration */ + /* - Set ADC multimode DMA transfer */ + /* - Set ADC multimode: delay between 2 sampling phases */ +#if defined(ADC_MULTIMODE_SUPPORT) + if (pADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) + { + MODIFY_REG(ADCxy_COMMON->CCR, + ADC_CCR_CKMODE + | ADC_CCR_PRESC + | ADC_CCR_DUAL + | ADC_CCR_MDMA + | ADC_CCR_DELAY + , + pADC_CommonInitStruct->CommonClock + | pADC_CommonInitStruct->Multimode + | pADC_CommonInitStruct->MultiDMATransfer + | pADC_CommonInitStruct->MultiTwoSamplingDelay + ); + } + else + { + MODIFY_REG(ADCxy_COMMON->CCR, + ADC_CCR_CKMODE + | ADC_CCR_PRESC + | ADC_CCR_DUAL + | ADC_CCR_MDMA + | ADC_CCR_DELAY + , + pADC_CommonInitStruct->CommonClock + | LL_ADC_MULTI_INDEPENDENT + ); + } +#else + LL_ADC_SetCommonClock(ADCxy_COMMON, pADC_CommonInitStruct->CommonClock); +#endif /* ADC_MULTIMODE_SUPPORT */ + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct) +{ + /* Set pADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + pADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; + +#if defined(ADC_MULTIMODE_SUPPORT) + /* Set fields of ADC multimode */ + pADC_CommonInitStruct->Multimode = LL_ADC_MULTI_INDEPENDENT; + pADC_CommonInitStruct->MultiDMATransfer = LL_ADC_MULTI_REG_DMA_EACH_ADC; + pADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE; +#endif /* ADC_MULTIMODE_SUPPORT */ +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * Caution: On this STM32 series, if several ADC instances are available + * on the selected device, RCC ADC reset will reset + * all ADC instances belonging to the common ADC instance. + * Refer to function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + __IO uint32_t timeout_cpu_cycles = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 1UL) + { + /* Stop potential ADC conversion on going on ADC group regular. */ + if (LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) + { + if (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) + { + LL_ADC_REG_StopConversion(ADCx); + } + } + + /* Stop potential ADC conversion on going on ADC group injected. */ + if (LL_ADC_INJ_IsConversionOngoing(ADCx) != 0UL) + { + if (LL_ADC_INJ_IsStopConversionOngoing(ADCx) == 0UL) + { + LL_ADC_INJ_StopConversion(ADCx); + } + } + + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while ((LL_ADC_REG_IsStopConversionOngoing(ADCx) + | LL_ADC_INJ_IsStopConversionOngoing(ADCx)) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Flush group injected contexts queue (register JSQR): */ + /* Note: Bit JQM must be set to empty the contexts queue (otherwise */ + /* contexts queue is maintained with the last active context). */ + LL_ADC_INJ_SetQueueMode(ADCx, LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY); + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + + /* Wait for ADC instance is effectively disabled */ + timeout_cpu_cycles = ADC_TIMEOUT_DISABLE_CPU_CYCLES; + while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + } + + /* Check whether ADC state is compliant with expected state */ + if (READ_BIT(ADCx->CR, + (ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) + { + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + CLEAR_BIT(ADCx->IER, + (LL_ADC_IT_ADRDY + | LL_ADC_IT_EOC + | LL_ADC_IT_EOS + | LL_ADC_IT_OVR + | LL_ADC_IT_EOSMP + | LL_ADC_IT_JEOC + | LL_ADC_IT_JEOS + | LL_ADC_IT_JQOVF + | LL_ADC_IT_AWD1 + | LL_ADC_IT_AWD2 + | LL_ADC_IT_AWD3 + ) + ); + + /* Reset register ISR */ + SET_BIT(ADCx->ISR, + (LL_ADC_FLAG_ADRDY + | LL_ADC_FLAG_EOC + | LL_ADC_FLAG_EOS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOSMP + | LL_ADC_FLAG_JEOC + | LL_ADC_FLAG_JEOS + | LL_ADC_FLAG_JQOVF + | LL_ADC_FLAG_AWD1 + | LL_ADC_FLAG_AWD2 + | LL_ADC_FLAG_AWD3 + ) + ); + + /* Reset register CR */ + /* - Bits ADC_CR_JADSTP, ADC_CR_ADSTP, ADC_CR_JADSTART, ADC_CR_ADSTART, */ + /* ADC_CR_ADCAL, ADC_CR_ADDIS, ADC_CR_ADEN are in */ + /* access mode "read-set": no direct reset applicable. */ + /* - Reset Calibration mode to default setting (single ended). */ + /* - Disable ADC internal voltage regulator. */ + /* - Enable ADC deep power down. */ + /* Note: ADC internal voltage regulator disable and ADC deep power */ + /* down enable are conditioned to ADC state disabled: */ + /* already done above. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN | ADC_CR_ADCALDIF); + SET_BIT(ADCx->CR, ADC_CR_DEEPPWD); + + /* Reset register CFGR */ + MODIFY_REG(ADCx->CFGR, + (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN + | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM + | ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN + | ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD + | ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN + | ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN), + ADC_CFGR_JQDIS + ); + + /* Reset register CFGR2 */ + CLEAR_BIT(ADCx->CFGR2, + (ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS + | ADC_CFGR2_SWTRIG | ADC_CFGR2_BULB | ADC_CFGR2_SMPTRIG + | ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) + ); + + /* Reset register SMPR1 */ + CLEAR_BIT(ADCx->SMPR1, + (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 + | ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 + | ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1) + ); + + /* Reset register SMPR2 */ + CLEAR_BIT(ADCx->SMPR2, + (ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | ADC_SMPR2_SMP16 + | ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | ADC_SMPR2_SMP13 + | ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | ADC_SMPR2_SMP10) + ); + + /* Reset register TR1 */ + MODIFY_REG(ADCx->TR1, ADC_TR1_AWDFILT | ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + + /* Reset register TR2 */ + MODIFY_REG(ADCx->TR2, ADC_TR2_HT2 | ADC_TR2_LT2, ADC_TR2_HT2); + + /* Reset register TR3 */ + MODIFY_REG(ADCx->TR3, ADC_TR3_HT3 | ADC_TR3_LT3, ADC_TR3_HT3); + + /* Reset register SQR1 */ + CLEAR_BIT(ADCx->SQR1, + (ADC_SQR1_SQ4 | ADC_SQR1_SQ3 | ADC_SQR1_SQ2 + | ADC_SQR1_SQ1 | ADC_SQR1_L) + ); + + /* Reset register SQR2 */ + CLEAR_BIT(ADCx->SQR2, + (ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 + | ADC_SQR2_SQ6 | ADC_SQR2_SQ5) + ); + + /* Reset register SQR3 */ + CLEAR_BIT(ADCx->SQR3, + (ADC_SQR3_SQ14 | ADC_SQR3_SQ13 | ADC_SQR3_SQ12 + | ADC_SQR3_SQ11 | ADC_SQR3_SQ10) + ); + + /* Reset register SQR4 */ + CLEAR_BIT(ADCx->SQR4, ADC_SQR4_SQ16 | ADC_SQR4_SQ15); + + /* Reset register JSQR */ + CLEAR_BIT(ADCx->JSQR, + (ADC_JSQR_JL + | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN + | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 + | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1) + ); + + /* Reset register DR */ + /* Note: bits in access mode read only, no direct reset applicable */ + + /* Reset register OFR1 */ + CLEAR_BIT(ADCx->OFR1, + ADC_OFR1_OFFSET1_EN | ADC_OFR1_OFFSET1_CH | ADC_OFR1_OFFSET1 | ADC_OFR1_SATEN | ADC_OFR1_OFFSETPOS); + /* Reset register OFR2 */ + CLEAR_BIT(ADCx->OFR2, + ADC_OFR2_OFFSET2_EN | ADC_OFR2_OFFSET2_CH | ADC_OFR2_OFFSET2 | ADC_OFR2_SATEN | ADC_OFR2_OFFSETPOS); + /* Reset register OFR3 */ + CLEAR_BIT(ADCx->OFR3, + ADC_OFR3_OFFSET3_EN | ADC_OFR3_OFFSET3_CH | ADC_OFR3_OFFSET3 | ADC_OFR3_SATEN | ADC_OFR3_OFFSETPOS); + /* Reset register OFR4 */ + CLEAR_BIT(ADCx->OFR4, + ADC_OFR4_OFFSET4_EN | ADC_OFR4_OFFSET4_CH | ADC_OFR4_OFFSET4 | ADC_OFR4_SATEN | ADC_OFR4_OFFSETPOS); + + /* Reset registers JDR1, JDR2, JDR3, JDR4 */ + /* Note: bits in access mode read only, no direct reset applicable */ + + /* Reset register AWD2CR */ + CLEAR_BIT(ADCx->AWD2CR, ADC_AWD2CR_AWD2CH); + + /* Reset register AWD3CR */ + CLEAR_BIT(ADCx->AWD3CR, ADC_AWD3CR_AWD3CH); + + /* Reset register DIFSEL */ + CLEAR_BIT(ADCx->DIFSEL, ADC_DIFSEL_DIFSEL); + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S); + } + else + { + /* ADC instance is in an unknown state */ + /* Need to performing a hard reset of ADC instance, using high level */ + /* clock source RCC ADC reset. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Affects both group regular and group injected (availability + * of ADC group injected depends on STM32 series). + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular or group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param pADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_RESOLUTION(pADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(pADC_InitStruct->DataAlignment)); + assert_param(IS_LL_ADC_LOW_POWER(pADC_InitStruct->LowPowerMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CFGR, + ADC_CFGR_RES + | ADC_CFGR_ALIGN + | ADC_CFGR_AUTDLY + , + pADC_InitStruct->Resolution + | pADC_InitStruct->DataAlignment + | pADC_InitStruct->LowPowerMode + ); + + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param pADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct) +{ + /* Set pADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + pADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + pADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + pADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular or group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, const LL_ADC_REG_InitTypeDef *pADC_RegInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(pADC_RegInitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(pADC_RegInitStruct->SequencerLength)); + if (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(pADC_RegInitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((pADC_RegInitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (pADC_RegInitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(pADC_RegInitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(pADC_RegInitStruct->DMATransfer)); + assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(pADC_RegInitStruct->Overrun)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* - Set ADC group regular overrun behavior */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + MODIFY_REG(ADCx->CFGR, + ADC_CFGR_EXTSEL + | ADC_CFGR_EXTEN + | ADC_CFGR_DISCEN + | ADC_CFGR_DISCNUM + | ADC_CFGR_CONT + | ADC_CFGR_ADFCFG + | ADC_CFGR_DMAEN + | ADC_CFGR_DMACFG + | ADC_CFGR_OVRMOD + , + pADC_RegInitStruct->TriggerSource + | pADC_RegInitStruct->SequencerDiscont + | pADC_RegInitStruct->ContinuousMode + | pADC_RegInitStruct->DMATransfer + | pADC_RegInitStruct->Overrun + ); + } + else + { + MODIFY_REG(ADCx->CFGR, + ADC_CFGR_EXTSEL + | ADC_CFGR_EXTEN + | ADC_CFGR_DISCEN + | ADC_CFGR_DISCNUM + | ADC_CFGR_CONT + | ADC_CFGR_ADFCFG + | ADC_CFGR_DMAEN + | ADC_CFGR_DMACFG + | ADC_CFGR_OVRMOD + , + pADC_RegInitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | pADC_RegInitStruct->ContinuousMode + | pADC_RegInitStruct->DMATransfer + | pADC_RegInitStruct->Overrun + ); + } + + /* Set ADC group regular sequencer length and scan direction */ + LL_ADC_REG_SetSequencerLength(ADCx, pADC_RegInitStruct->SequencerLength); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct) +{ + /* Set pADC_RegInitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + pADC_RegInitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + pADC_RegInitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + pADC_RegInitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + pADC_RegInitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + pADC_RegInitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; + pADC_RegInitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; +} + +/** + * @brief Initialize some features of ADC group injected. + * @note These parameters have an impact on ADC scope: ADC group injected. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "INJ"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 series. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group injected sequencer: + * map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_INJ_SetSequencerRanks(). + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @note Caution if feature ADC group injected contexts queue is enabled + * (refer to with function @ref LL_ADC_INJ_SetQueueMode() ): + * using successively several times this function will appear as + * having no effect. + * To set several features of ADC group injected, use + * function @ref LL_ADC_INJ_ConfigQueueContext(). + * @param ADCx ADC instance + * @param pADC_InjInitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, const LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(pADC_InjInitStruct->TriggerSource)); + assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(pADC_InjInitStruct->SequencerLength)); + if (pADC_InjInitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) + { + assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(pADC_InjInitStruct->SequencerDiscont)); + } + assert_param(IS_LL_ADC_INJ_TRIG_AUTO(pADC_InjInitStruct->TrigAuto)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group injected */ + /* - Set ADC group injected trigger source */ + /* - Set ADC group injected sequencer length */ + /* - Set ADC group injected sequencer discontinuous mode */ + /* - Set ADC group injected conversion trigger: independent or */ + /* from ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if (pADC_InjInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + { + MODIFY_REG(ADCx->CFGR, + ADC_CFGR_JDISCEN + | ADC_CFGR_JAUTO + , + pADC_InjInitStruct->SequencerDiscont + | pADC_InjInitStruct->TrigAuto + ); + } + else + { + MODIFY_REG(ADCx->CFGR, + ADC_CFGR_JDISCEN + | ADC_CFGR_JAUTO + , + LL_ADC_REG_SEQ_DISCONT_DISABLE + | pADC_InjInitStruct->TrigAuto + ); + } + + MODIFY_REG(ADCx->JSQR, + ADC_JSQR_JEXTSEL + | ADC_JSQR_JEXTEN + | ADC_JSQR_JL + , + pADC_InjInitStruct->TriggerSource + | pADC_InjInitStruct->SequencerLength + ); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_INJ_InitTypeDef field to default value. + * @param pADC_InjInitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *pADC_InjInitStruct) +{ + /* Set pADC_InjInitStruct fields to default values */ + /* Set fields of ADC group injected */ + pADC_InjInitStruct->TriggerSource = LL_ADC_INJ_TRIG_SOFTWARE; + pADC_InjInitStruct->SequencerLength = LL_ADC_INJ_SEQ_SCAN_DISABLE; + pADC_InjInitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE; + pADC_InjInitStruct->TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 || ADC2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_cordic.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_cordic.c new file mode 100644 index 000000000..b6f1b4eca --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_cordic.c @@ -0,0 +1,102 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_cordic.c + * @author MCD Application Team + * @brief CORDIC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_cordic.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(CORDIC) + +/** @addtogroup CORDIC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORDIC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CORDIC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initialize CORDIC peripheral registers to their default reset values. + * @param CORDICx CORDIC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CORDIC registers are de-initialized + * - ERROR: CORDIC registers are not de-initialized + */ +ErrorStatus LL_CORDIC_DeInit(const CORDIC_TypeDef *CORDICx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_CORDIC_ALL_INSTANCE(CORDICx)); + + if (CORDICx == CORDIC) + { + /* Force CORDIC reset */ + LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_CORDIC); + + /* Release CORDIC reset */ + LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_CORDIC); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CORDIC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crc.c new file mode 100644 index 000000000..f5f45cca3 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crc.c @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_crc.c + * @author MCD Application Team + * @brief CRC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_crc.h" +#include "stm32h7rsxx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (CRC) + +/** @addtogroup CRC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize CRC registers (Registers restored to their default values). + * @param CRCx CRC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRC registers are de-initialized + * - ERROR: CRC registers are not de-initialized + */ +ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(CRCx)); + + if (CRCx == CRC) + { + /* Force CRC reset */ + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_CRC); + + /* Release CRC reset */ + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_CRC); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (CRC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crs.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crs.c new file mode 100644 index 000000000..c4a12d5e9 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_crs.c @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_crs.c + * @author MCD Application Team + * @brief CRS LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_crs.h" +#include "stm32h7rsxx_ll_bus.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRS_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes CRS peripheral registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRS registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_CRS_DeInit(void) +{ + LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_CRS); + LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_CRS); + + return SUCCESS; +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dlyb.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dlyb.c new file mode 100644 index 000000000..728eb2943 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dlyb.c @@ -0,0 +1,243 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dlyb.c + * @author MCD Application Team + * @brief DelayBlock Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the DelayBlock peripheral: + * + input clock frequency + * + up to 12 oversampling phases + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### DelayBlock peripheral features ##### + ============================================================================== + [..] The DelayBlock is used to generate an Output clock which is de-phased from the Input + clock. The phase of the Output clock is programmed by FW. The Output clock is then used + to clock the receive data in i.e. a SDMMC, OSPI or QSPI interface. + The delay is Voltage and Temperature dependent, which may require FW to do re-tuning + and recenter the Output clock phase to the receive data. + + [..] The DelayBlock features include the following: + (+) Input clock frequency. + (+) Up to 12 oversampling phases. + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the DELAY peripheral. + The LL_DLYB_SetDelay() function, configure the Delay value configured on SEL and UNIT. + The LL_DLYB_GetDelay() function, return the Delay value configured on SEL and UNIT. + The LL_DLYB_GetClockPeriod()function, get the clock period. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +/** @defgroup DLYB_LL DLYB + * @brief DLYB LL module driver. + * @{ + */ + +#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_OSPI_MODULE_ENABLED) || defined(HAL_XSPI_MODULE_ENABLED) +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_OCTOSPI1) || defined (DLYB_OCTOSPI2) + +/** + @cond 0 + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define DLYB_TIMEOUT 0xFFU +#define DLYB_LNG_10_0_MASK 0x07FF0000U +#define DLYB_LNG_11_10_MASK 0x0C000000U +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** + @endcond + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DLYB_LL_Exported_Functions + * @brief Configuration and control functions + * +@verbatim + =============================================================================== + ##### Control functions ##### + =============================================================================== + [..] This section provides functions allowing to + (+) Control the DLYB. +@endverbatim + * @{ + */ + +/** @addtogroup DLYB_Control_Functions DLYB Control functions + * @{ + */ + +/** + * @brief Set the Delay value configured on SEL and UNIT. + * @param DLYBx: Pointer to DLYB instance. + * @param pdlyb_cfg: Pointer to DLYB configuration structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: the Delay value is set. + * - ERROR: the Delay value is not set. + */ +void LL_DLYB_SetDelay(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg) +{ + /* Check the DelayBlock instance */ + assert_param(IS_DLYB_ALL_INSTANCE(DLYBx)); + + /* Enable the length sampling */ + SET_BIT(DLYBx->CR, DLYB_CR_SEN); + + /* Update the UNIT and SEL field */ + DLYBx->CFGR = (pdlyb_cfg->PhaseSel) | ((pdlyb_cfg->Units) << DLYB_CFGR_UNIT_Pos); + + /* Disable the length sampling */ + CLEAR_BIT(DLYBx->CR, DLYB_CR_SEN); +} + +/** + * @brief Get the Delay value configured on SEL and UNIT. + * @param DLYBx: Pointer to DLYB instance. + * @param pdlyb_cfg: Pointer to DLYB configuration structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: the Delay value is received. + * - ERROR: the Delay value is not received. + */ +void LL_DLYB_GetDelay(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg) +{ + /* Check the DelayBlock instance */ + assert_param(IS_DLYB_ALL_INSTANCE(DLYBx)); + + /* Fill the DelayBlock configuration structure with SEL and UNIT value */ + pdlyb_cfg->Units = ((DLYBx->CFGR & DLYB_CFGR_UNIT) >> DLYB_CFGR_UNIT_Pos); + pdlyb_cfg->PhaseSel = (DLYBx->CFGR & DLYB_CFGR_SEL); +} + +/** + * @brief Get the clock period. + * @param DLYBx: Pointer to DLYB instance. + * @param pdlyb_cfg: Pointer to DLYB configuration structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: there is a valid period detected and stored in pdlyb_cfg. + * - ERROR: there is no valid period detected. + */ +uint32_t LL_DLYB_GetClockPeriod(DLYB_TypeDef *DLYBx, LL_DLYB_CfgTypeDef *pdlyb_cfg) +{ + uint32_t i = 0U; + uint32_t nb ; + uint32_t lng ; + uint32_t tickstart; + + /* Check the DelayBlock instance */ + assert_param(IS_DLYB_ALL_INSTANCE(DLYBx)); + + /* Enable the length sampling */ + SET_BIT(DLYBx->CR, DLYB_CR_SEN); + + /* Delay line length detection */ + while (i < DLYB_MAX_UNIT) + { + /* Set the Delay of the UNIT(s)*/ + DLYBx->CFGR = DLYB_MAX_SELECT | (i << DLYB_CFGR_UNIT_Pos); + + /* Waiting for a LNG valid value */ + tickstart = HAL_GetTick(); + while ((DLYBx->CFGR & DLYB_CFGR_LNGF) == 0U) + { + if ((HAL_GetTick() - tickstart) >= DLYB_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if ((DLYBx->CFGR & DLYB_CFGR_LNGF) == 0U) + { + return (uint32_t) HAL_TIMEOUT; + } + } + } + + if ((DLYBx->CFGR & DLYB_LNG_10_0_MASK) != 0U) + { + if ((DLYBx->CFGR & (DLYB_CFGR_LNG_11 | DLYB_CFGR_LNG_10)) != DLYB_LNG_11_10_MASK) + { + /* Delay line length is configured to one input clock period*/ + break; + } + } + i++; + } + + if (DLYB_MAX_UNIT != i) + { + /* Determine how many unit delays (nb) span one input clock period */ + lng = (DLYBx->CFGR & DLYB_CFGR_LNG) >> 16U; + nb = 10U; + while ((nb > 0U) && ((lng >> nb) == 0U)) + { + nb--; + } + if (nb != 0U) + { + pdlyb_cfg->PhaseSel = nb ; + pdlyb_cfg->Units = i ; + + /* Disable the length sampling */ + DLYBx->CR = DLYB_CR_SEN; + + return (uint32_t)SUCCESS; + } + } + + /* Disable the length sampling */ + DLYBx->CR = DLYB_CR_SEN; + + return (uint32_t)ERROR; + +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* DLYB_SDMMC1 || DLYB_SDMMC2 || DLYB_OCTOSPI1 || DLYB_OCTOSPI2 */ +#endif /* HAL_SD_MODULE_ENABLED || HAL_OSPI_MODULE_ENABLED || HAL_XSPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma.c new file mode 100644 index 000000000..6a3ea567d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma.c @@ -0,0 +1,1195 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### LL DMA driver acronyms ##### + ============================================================================== + [..] Acronyms table : + ========================================= + || Acronym || || + ========================================= + || SRC || Source || + || DEST || Destination || + || ADDR || Address || + || ADDRS || Addresses || + || INC || Increment / Incremented || + || DEC || Decrement / Decremented || + || BLK || Block || + || RPT || Repeat / Repeated || + || TRIG || Trigger || + ========================================= + @endverbatim + ****************************************************************************** + */ + +#if defined (USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_dma.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if (defined (GPDMA1) || defined (HPDMA1)) + +/** @addtogroup DMA_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, Channel) ((((INSTANCE) == HPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_0) || \ + ((Channel) == LL_DMA_CHANNEL_1) || \ + ((Channel) == LL_DMA_CHANNEL_2) || \ + ((Channel) == LL_DMA_CHANNEL_3) || \ + ((Channel) == LL_DMA_CHANNEL_4) || \ + ((Channel) == LL_DMA_CHANNEL_5) || \ + ((Channel) == LL_DMA_CHANNEL_6) || \ + ((Channel) == LL_DMA_CHANNEL_7) || \ + ((Channel) == LL_DMA_CHANNEL_8) || \ + ((Channel) == LL_DMA_CHANNEL_9) || \ + ((Channel) == LL_DMA_CHANNEL_10) || \ + ((Channel) == LL_DMA_CHANNEL_11) || \ + ((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15) || \ + ((Channel) == LL_DMA_CHANNEL_ALL))) || \ + (((INSTANCE) == GPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_0) || \ + ((Channel) == LL_DMA_CHANNEL_1) || \ + ((Channel) == LL_DMA_CHANNEL_2) || \ + ((Channel) == LL_DMA_CHANNEL_3) || \ + ((Channel) == LL_DMA_CHANNEL_4) || \ + ((Channel) == LL_DMA_CHANNEL_5) || \ + ((Channel) == LL_DMA_CHANNEL_6) || \ + ((Channel) == LL_DMA_CHANNEL_7) || \ + ((Channel) == LL_DMA_CHANNEL_8) || \ + ((Channel) == LL_DMA_CHANNEL_9) || \ + ((Channel) == LL_DMA_CHANNEL_10) || \ + ((Channel) == LL_DMA_CHANNEL_11) || \ + ((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15) || \ + ((Channel) == LL_DMA_CHANNEL_ALL)))) + +#define IS_LL_HPDMA_CHANNEL_INSTANCE(INSTANCE, Channel) (((INSTANCE) == HPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_0) || \ + ((Channel) == LL_DMA_CHANNEL_1) || \ + ((Channel) == LL_DMA_CHANNEL_2) || \ + ((Channel) == LL_DMA_CHANNEL_3) || \ + ((Channel) == LL_DMA_CHANNEL_4) || \ + ((Channel) == LL_DMA_CHANNEL_5) || \ + ((Channel) == LL_DMA_CHANNEL_6) || \ + ((Channel) == LL_DMA_CHANNEL_7) || \ + ((Channel) == LL_DMA_CHANNEL_8) || \ + ((Channel) == LL_DMA_CHANNEL_9) || \ + ((Channel) == LL_DMA_CHANNEL_10) || \ + ((Channel) == LL_DMA_CHANNEL_11) || \ + ((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15))) + +#define IS_LL_GPDMA_CHANNEL_INSTANCE(INSTANCE, Channel) (((INSTANCE) == GPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_0) || \ + ((Channel) == LL_DMA_CHANNEL_1) || \ + ((Channel) == LL_DMA_CHANNEL_2) || \ + ((Channel) == LL_DMA_CHANNEL_3) || \ + ((Channel) == LL_DMA_CHANNEL_4) || \ + ((Channel) == LL_DMA_CHANNEL_5) || \ + ((Channel) == LL_DMA_CHANNEL_6) || \ + ((Channel) == LL_DMA_CHANNEL_7) || \ + ((Channel) == LL_DMA_CHANNEL_8) || \ + ((Channel) == LL_DMA_CHANNEL_9) || \ + ((Channel) == LL_DMA_CHANNEL_10) || \ + ((Channel) == LL_DMA_CHANNEL_11) || \ + ((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15))) + +#define IS_LL_DMA_2D_CHANNEL_INSTANCE(INSTANCE, Channel) ((((INSTANCE) == HPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15))) || \ + (((INSTANCE) == GPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_12) || \ + ((Channel) == LL_DMA_CHANNEL_13) || \ + ((Channel) == LL_DMA_CHANNEL_14) || \ + ((Channel) == LL_DMA_CHANNEL_15)))) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_NORMAL) || \ + ((__VALUE__) == LL_DMA_PFCTRL)) + +#define IS_LL_DMA_PFREQ_INSTANCE(INSTANCE, Channel) ((((INSTANCE) == HPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_15))) || \ + (((INSTANCE) == GPDMA1) && \ + (((Channel) == LL_DMA_CHANNEL_0) || \ + ((Channel) == LL_DMA_CHANNEL_15)))) + +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)) + +#define IS_LL_DMA_DATA_ALIGNMENT(__VALUE__) (((__VALUE__) == LL_DMA_DATA_ALIGN_ZEROPADD) || \ + ((__VALUE__) == LL_DMA_DATA_ALIGN_SIGNEXTPADD) || \ + ((__VALUE__) == LL_DMA_DATA_PACK_UNPACK)) + +#define IS_LL_DMA_BURST_LENGTH(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= 64U)) + +#define IS_LL_DMA_SRC_DATA_WIDTH(__VALUE__) (((__VALUE__) == LL_DMA_SRC_DATAWIDTH_BYTE) || \ + ((__VALUE__) == LL_DMA_SRC_DATAWIDTH_HALFWORD) || \ + ((__VALUE__) == LL_DMA_SRC_DATAWIDTH_WORD) || \ + ((__VALUE__) == LL_DMA_SRC_DATAWIDTH_DOUBLEWORD)) + +#define IS_LL_DMA_DEST_DATA_WIDTH(__VALUE__) (((__VALUE__) == LL_DMA_DEST_DATAWIDTH_BYTE) || \ + ((__VALUE__) == LL_DMA_DEST_DATAWIDTH_HALFWORD) || \ + ((__VALUE__) == LL_DMA_DEST_DATAWIDTH_WORD) || \ + ((__VALUE__) == LL_DMA_DEST_DATAWIDTH_DOUBLEWORD)) + +#define IS_LL_DMA_SRC_INCREMENT_MODE(__VALUE__) (((__VALUE__) == LL_DMA_SRC_FIXED) || \ + ((__VALUE__) == LL_DMA_SRC_INCREMENT)) + +#define IS_LL_DMA_DEST_INCREMENT_MODE(__VALUE__) (((__VALUE__) == LL_DMA_DEST_FIXED) || \ + ((__VALUE__) == LL_DMA_DEST_INCREMENT)) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_LOW_PRIORITY_LOW_WEIGHT) || \ + ((__VALUE__) == LL_DMA_LOW_PRIORITY_MID_WEIGHT) || \ + ((__VALUE__) == LL_DMA_LOW_PRIORITY_HIGH_WEIGHT) || \ + ((__VALUE__) == LL_DMA_HIGH_PRIORITY)) + +#define IS_LL_DMA_BLK_DATALENGTH(__VALUE__) ((__VALUE__) <= 0xFFFFU) + +#define IS_LL_DMA_BLK_REPEATCOUNT(__VALUE__) ((__VALUE__) <= 0x0EFFU) + +#define IS_LL_DMA_TRIGGER_MODE(__VALUE__) (((__VALUE__) == LL_DMA_TRIGM_BLK_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TRIGM_RPT_BLK_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TRIGM_LLI_LINK_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TRIGM_SINGLBURST_TRANSFER )) + +#define IS_LL_DMA_TRIGGER_POLARITY(__VALUE__) (((__VALUE__) == LL_DMA_TRIG_POLARITY_MASKED) || \ + ((__VALUE__) == LL_DMA_TRIG_POLARITY_RISING) || \ + ((__VALUE__) == LL_DMA_TRIG_POLARITY_FALLING)) + +#define IS_LL_DMA_BLKHW_REQUEST(__VALUE__) (((__VALUE__) == LL_DMA_HWREQUEST_SINGLEBURST) || \ + ((__VALUE__) == LL_DMA_HWREQUEST_BLK)) + +#define IS_LL_DMA_TRIGGER_SELECTION(__VALUE__) ((__VALUE__) <= LL_GPDMA1_TRIGGER_TIM15_TRGO) + +#define IS_LL_DMA_REQUEST_SELECTION(__VALUE__) ((__VALUE__) <= LL_GPDMA1_REQUEST_I3C1_RS) + +#define IS_LL_DMA_TRANSFER_EVENT_MODE(__VALUE__) (((__VALUE__) == LL_DMA_TCEM_BLK_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TCEM_RPT_BLK_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TCEM_EACH_LLITEM_TRANSFER) || \ + ((__VALUE__) == LL_DMA_TCEM_LAST_LLITEM_TRANSFER)) + +#define IS_LL_DMA_DEST_WORD_EXCHANGE(__VALUE__) (((__VALUE__) == LL_DMA_DEST_WORD_PRESERVE) || \ + ((__VALUE__) == LL_DMA_DEST_WORD_EXCHANGE)) + +#define IS_LL_DMA_DEST_HALFWORD_EXCHANGE(__VALUE__) (((__VALUE__) == LL_DMA_DEST_HALFWORD_PRESERVE) || \ + ((__VALUE__) == LL_DMA_DEST_HALFWORD_EXCHANGE)) + +#define IS_LL_DMA_DEST_BYTE_EXCHANGE(__VALUE__) (((__VALUE__) == LL_DMA_DEST_BYTE_PRESERVE) || \ + ((__VALUE__) == LL_DMA_DEST_BYTE_EXCHANGE)) + +#define IS_LL_DMA_SRC_BYTE_EXCHANGE(__VALUE__) (((__VALUE__) == LL_DMA_SRC_BYTE_PRESERVE) || \ + ((__VALUE__) == LL_DMA_SRC_BYTE_EXCHANGE)) + +#define IS_LL_DMA_LINK_ALLOCATED_PORT(__VALUE__) (((__VALUE__) == LL_DMA_LINK_ALLOCATED_PORT0) || \ + ((__VALUE__) == LL_DMA_LINK_ALLOCATED_PORT1)) + +#define IS_LL_DMA_SRC_ALLOCATED_PORT(__VALUE__) (((__VALUE__) == LL_DMA_SRC_ALLOCATED_PORT0) || \ + ((__VALUE__) == LL_DMA_SRC_ALLOCATED_PORT1)) + +#define IS_LL_DMA_DEST_ALLOCATED_PORT(__VALUE__) (((__VALUE__) == LL_DMA_DEST_ALLOCATED_PORT0) || \ + ((__VALUE__) == LL_DMA_DEST_ALLOCATED_PORT1)) + +#define IS_LL_DMA_LINK_STEP_MODE(__VALUE__) (((__VALUE__) == LL_DMA_LSM_FULL_EXECUTION) || \ + ((__VALUE__) == LL_DMA_LSM_1LINK_EXECUTION)) + +#define IS_LL_DMA_BURST_SRC_ADDR_UPDATE(__VALUE__) (((__VALUE__) == LL_DMA_BURST_SRC_ADDR_INCREMENT) || \ + ((__VALUE__) == LL_DMA_BURST_SRC_ADDR_DECREMENT)) + +#define IS_LL_DMA_BURST_DEST_ADDR_UPDATE(__VALUE__) (((__VALUE__) == LL_DMA_BURST_DEST_ADDR_INCREMENT) || \ + ((__VALUE__) == LL_DMA_BURST_DEST_ADDR_DECREMENT)) + +#define IS_LL_DMA_BURST_ADDR_UPDATE_VALUE(__VALUE__) ((__VALUE__) <= 0x1FFFU) + +#define IS_LL_DMA_BLKRPT_SRC_ADDR_UPDATE(__VALUE__) (((__VALUE__) == LL_DMA_BLKRPT_SRC_ADDR_INCREMENT) || \ + ((__VALUE__) == LL_DMA_BLKRPT_SRC_ADDR_DECREMENT)) + +#define IS_LL_DMA_BLKRPT_DEST_ADDR_UPDATE(__VALUE__) (((__VALUE__) == LL_DMA_BLKRPT_DEST_ADDR_INCREMENT) || \ + ((__VALUE__) == LL_DMA_BLKRPT_DEST_ADDR_DECREMENT)) + +#define IS_LL_DMA_BLKRPT_ADDR_UPDATE_VALUE(__VALUE__) ((__VALUE__) <= 0xFFFFU) + +#define IS_LL_DMA_LINK_BASEADDR(__VALUE__) (((__VALUE__) & 0xFFFFU) == 0U) + +#define IS_LL_DMA_LINK_ADDR_OFFSET(__VALUE__) (((__VALUE__) & 0x03U) == 0U) + +#define IS_LL_DMA_LINK_UPDATE_REGISTERS(__VALUE__) ((((__VALUE__) & 0x01FE0000U) == 0U) && ((__VALUE__) != 0U)) + +#define IS_LL_DMA_LINK_NODETYPE(__VALUE__) (((__VALUE__) == LL_DMA_HPDMA_2D_NODE) || \ + ((__VALUE__) == LL_DMA_HPDMA_LINEAR_NODE) || \ + ((__VALUE__) == LL_DMA_GPDMA_2D_NODE) || \ + ((__VALUE__) == LL_DMA_GPDMA_LINEAR_NODE)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @note This API is used for all available DMA channels. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use + * helper macros : + * @arg @ref LL_DMA_GET_INSTANCE + * @arg @ref LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval An ErrorStatus enumeration value: + * - SUCCESS : DMA registers are de-initialized. + * - ERROR : DMA registers are not de-initialized. + */ +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + DMA_Channel_TypeDef *tmp; + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters */ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == GPDMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPDMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPDMA1); + } + else + { + /* Force reset of DMA clock */ + LL_AHB5_GRP1_ForceReset(LL_AHB5_GRP1_PERIPH_HPDMA1); + + /* Release reset of DMA clock */ + LL_AHB5_GRP1_ReleaseReset(LL_AHB5_GRP1_PERIPH_HPDMA1); + } + } + else + { + /* Get the DMA Channel Instance */ + tmp = (DMA_Channel_TypeDef *)(LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Suspend DMA channel */ + LL_DMA_SuspendChannel(DMAx, Channel); + + /* Disable the selected Channel */ + LL_DMA_ResetChannel(DMAx, Channel); + + /* Reset DMAx_Channely control register */ + LL_DMA_WriteReg(tmp, CLBAR, 0U); + + /* Reset DMAx_Channely control register */ + LL_DMA_WriteReg(tmp, CCR, 0U); + + /* Reset DMAx_Channely Configuration register */ + LL_DMA_WriteReg(tmp, CTR1, 0U); + + /* Reset DMAx_Channely transfer register 2 */ + LL_DMA_WriteReg(tmp, CTR2, 0U); + + /* Reset DMAx_Channely block number of data register */ + LL_DMA_WriteReg(tmp, CBR1, 0U); + + /* Reset DMAx_Channely source address register */ + LL_DMA_WriteReg(tmp, CSAR, 0U); + + /* Reset DMAx_Channely destination address register */ + LL_DMA_WriteReg(tmp, CDAR, 0U); + + /* Check DMA channel */ + if (IS_LL_DMA_2D_CHANNEL_INSTANCE(DMAx, Channel) != 0U) + { + /* Reset DMAx_Channely transfer register 3 */ + LL_DMA_WriteReg(tmp, CTR3, 0U); + + /* Reset DMAx_Channely Block register 2 */ + LL_DMA_WriteReg(tmp, CBR2, 0U); + } + + /* Reset DMAx_Channely Linked list address register */ + LL_DMA_WriteReg(tmp, CLLR, 0U); + + /* Reset DMAx_Channely pending flags */ + LL_DMA_WriteReg(tmp, CFCR, 0x00003F00U); + + /* Reset DMAx_Channely attribute */ + LL_DMA_DisableChannelPrivilege(DMAx, Channel); + + } + + return (uint32_t)status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters + * in DMA_InitStruct. + * @note This API is used for all available DMA channels. + * @note A software request transfer can be done once programming the direction + * field in memory to memory value. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use + * helper macros : + * @arg @ref LL_DMA_GET_INSTANCE + * @arg @ref LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS : DMA registers are initialized. + * - ERROR : Not applicable. + */ +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + + /* Check direction */ + if (DMA_InitStruct->Direction != LL_DMA_DIRECTION_MEMORY_TO_MEMORY) + { + assert_param(IS_LL_DMA_REQUEST_SELECTION(DMA_InitStruct->Request)); + } + + assert_param(IS_LL_DMA_DATA_ALIGNMENT(DMA_InitStruct->DataAlignment)); + assert_param(IS_LL_DMA_SRC_DATA_WIDTH(DMA_InitStruct->SrcDataWidth)); + assert_param(IS_LL_DMA_DEST_DATA_WIDTH(DMA_InitStruct->DestDataWidth)); + assert_param(IS_LL_DMA_SRC_INCREMENT_MODE(DMA_InitStruct->SrcIncMode)); + assert_param(IS_LL_DMA_DEST_INCREMENT_MODE(DMA_InitStruct->DestIncMode)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + assert_param(IS_LL_DMA_BLK_DATALENGTH(DMA_InitStruct->BlkDataLength)); + assert_param(IS_LL_DMA_TRIGGER_POLARITY(DMA_InitStruct->TriggerPolarity)); + assert_param(IS_LL_DMA_BLKHW_REQUEST(DMA_InitStruct->BlkHWRequest)); + assert_param(IS_LL_DMA_TRANSFER_EVENT_MODE(DMA_InitStruct->TransferEventMode)); + assert_param(IS_LL_DMA_LINK_STEP_MODE(DMA_InitStruct->LinkStepMode)); + assert_param(IS_LL_DMA_LINK_BASEADDR(DMA_InitStruct->LinkedListBaseAddr)); + assert_param(IS_LL_DMA_LINK_ADDR_OFFSET(DMA_InitStruct->LinkedListAddrOffset)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + if (DMA_InitStruct->Mode == LL_DMA_PFCTRL) + { + assert_param(IS_LL_DMA_PFREQ_INSTANCE(DMAx, Channel)); + } + + /* Check DMA instance */ + if ((IS_LL_HPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U) || (IS_LL_GPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U)) + { + assert_param(IS_LL_DMA_BURST_LENGTH(DMA_InitStruct->SrcBurstLength)); + assert_param(IS_LL_DMA_BURST_LENGTH(DMA_InitStruct->DestBurstLength)); + assert_param(IS_LL_DMA_DEST_WORD_EXCHANGE(DMA_InitStruct->DestWordExchange)); + assert_param(IS_LL_DMA_DEST_HALFWORD_EXCHANGE(DMA_InitStruct->DestHWordExchange)); + assert_param(IS_LL_DMA_DEST_BYTE_EXCHANGE(DMA_InitStruct->DestByteExchange)); + assert_param(IS_LL_DMA_SRC_BYTE_EXCHANGE(DMA_InitStruct->SrcByteExchange)); + assert_param(IS_LL_DMA_LINK_ALLOCATED_PORT(DMA_InitStruct->LinkAllocatedPort)); + assert_param(IS_LL_DMA_SRC_ALLOCATED_PORT(DMA_InitStruct->SrcAllocatedPort)); + assert_param(IS_LL_DMA_DEST_ALLOCATED_PORT(DMA_InitStruct->DestAllocatedPort)); + } + + /* Check trigger polarity */ + if (DMA_InitStruct->TriggerPolarity != LL_DMA_TRIG_POLARITY_MASKED) + { + assert_param(IS_LL_DMA_TRIGGER_MODE(DMA_InitStruct->TriggerMode)); + assert_param(IS_LL_DMA_TRIGGER_SELECTION(DMA_InitStruct->TriggerSelection)); + } + + /* Check DMA channel */ + if (IS_LL_DMA_2D_CHANNEL_INSTANCE(DMAx, Channel) != 0U) + { + assert_param(IS_LL_DMA_BLK_REPEATCOUNT(DMA_InitStruct->BlkRptCount)); + assert_param(IS_LL_DMA_BURST_SRC_ADDR_UPDATE(DMA_InitStruct->SrcAddrUpdateMode)); + assert_param(IS_LL_DMA_BURST_DEST_ADDR_UPDATE(DMA_InitStruct->DestAddrUpdateMode)); + assert_param(IS_LL_DMA_BURST_ADDR_UPDATE_VALUE(DMA_InitStruct->SrcAddrOffset)); + assert_param(IS_LL_DMA_BURST_ADDR_UPDATE_VALUE(DMA_InitStruct->DestAddrOffset)); + assert_param(IS_LL_DMA_BLKRPT_SRC_ADDR_UPDATE(DMA_InitStruct->BlkRptSrcAddrUpdateMode)); + assert_param(IS_LL_DMA_BLKRPT_DEST_ADDR_UPDATE(DMA_InitStruct->BlkRptDestAddrUpdateMode)); + assert_param(IS_LL_DMA_BLKRPT_ADDR_UPDATE_VALUE(DMA_InitStruct->BlkRptSrcAddrOffset)); + assert_param(IS_LL_DMA_BLKRPT_ADDR_UPDATE_VALUE(DMA_InitStruct->BlkRptDestAddrOffset)); + } + + /*-------------------------- DMAx CLBAR Configuration ------------------------ + * Configure the Transfer linked list address with parameter : + * - LinkedListBaseAdd: DMA_CLBAR_LBA[31:16] bits + */ + LL_DMA_SetLinkedListBaseAddr(DMAx, Channel, DMA_InitStruct->LinkedListBaseAddr); + + /*-------------------------- DMAx CCR Configuration -------------------------- + * Configure the control parameter : + * - LinkAllocatedPort: DMA_CCR_LAP bit + * - LinkStepMode: DMA_CCR_LSM bit + * - Priority: DMA_CCR_PRIO [23:22] bits + */ + LL_DMA_ConfigControl(DMAx, Channel, DMA_InitStruct->Priority | \ + DMA_InitStruct->LinkAllocatedPort | \ + DMA_InitStruct->LinkStepMode); + + /*-------------------------- DMAx CTR1 Configuration ------------------------- + * Configure the Data transfer parameter : + * - DestAllocatedPort: DMA_CTR1_DAP bit + * - DestWordExchange: DMA_CTR1_DWX bit + * - DestHWordExchange: DMA_CTR1_DHX bit + * - DestByteExchange: DMA_CTR1_DBX bit + * - DestIncMode: DMA_CTR1_DINC bit + * - DestDataWidth: DMA_CTR1_DDW_LOG2 [17:16] bits + * - SrcAllocatedPort: DMA_CTR1_SAP bit + * - SrcByteExchange: DMA_CTR1_SBX bit + * - DataAlignment: DMA_CTR1_PAM [12:11] bits + * - SrcIncMode: DMA_CTR1_SINC bit + * - SrcDataWidth: DMA_CTR1_SDW_LOG2 [1:0] bits + * - SrcBurstLength: DMA_CTR1_SBL_1 [9:4] bits + * - DestBurstLength: DMA_CTR1_DBL_1 [25:20] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->DestAllocatedPort | \ + DMA_InitStruct->DestWordExchange | \ + DMA_InitStruct->DestHWordExchange | \ + DMA_InitStruct->DestByteExchange | \ + DMA_InitStruct->DestIncMode | \ + DMA_InitStruct->DestDataWidth | \ + DMA_InitStruct->SrcAllocatedPort | \ + DMA_InitStruct->SrcByteExchange | \ + DMA_InitStruct->DataAlignment | \ + DMA_InitStruct->SrcIncMode | \ + DMA_InitStruct->SrcDataWidth); + /* Check DMA instance */ + if ((IS_LL_HPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U) || (IS_LL_GPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U)) + { + LL_DMA_ConfigBurstLength(DMAx, Channel, DMA_InitStruct->SrcBurstLength, + DMA_InitStruct->DestBurstLength); + } + + /*-------------------------- DMAx CTR2 Configuration ------------------------- + * Configure the channel transfer parameter : + * - TransferEventMode: DMA_CTR2_TCEM [31:30] bits + * - TriggerPolarity: DMA_CTR2_TRIGPOL [25:24] bits + * - TriggerMode: DMA_CTR2_TRIGM [15:14] bits + * - BlkHWRequest: DMA_CTR2_BREQ bit + * - Mode: DMA_CTR2_PFREQ bit + * - Direction: DMA_CTR2_DREQ bit + * - Direction: DMA_CTR2_SWREQ bit + * - TriggerSelection: DMA_CTR2_TRIGSEL [21:16] bits + * - Request: DMA_CTR2_REQSEL [6:0] bits + */ + LL_DMA_ConfigChannelTransfer(DMAx, Channel, DMA_InitStruct->TransferEventMode | \ + DMA_InitStruct->TriggerPolarity | \ + DMA_InitStruct->BlkHWRequest | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->Direction); + + /* Check direction */ + if (DMA_InitStruct->Direction != LL_DMA_DIRECTION_MEMORY_TO_MEMORY) + { + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->Request); + } + + /* Check trigger polarity */ + if (DMA_InitStruct->TriggerPolarity != LL_DMA_TRIG_POLARITY_MASKED) + { + LL_DMA_SetHWTrigger(DMAx, Channel, DMA_InitStruct->TriggerSelection); + LL_DMA_SetTriggerMode(DMAx, Channel, DMA_InitStruct->TriggerMode); + } + + /*-------------------------- DMAx CBR1 Configuration ------------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - BlkDataLength: DMA_CBR1_BNDT[15:0] bits + * - BlkRptCount: DMA_CBR1_BRC[26:16] bits + * BlkRptCount field is supported only by 2D addressing channels. + * - BlkRptSrcAddrUpdateMode: DMA_CBR1_BRSDEC bit + * BlkRptSrcAddrUpdateMode field is supported only by 2D addressing channels. + * - BlkRptDestAddrUpdateMode: DMA_CBR1_BRDDEC bit + * BlkRptDestAddrUpdateMode field is supported only by 2D addressing channels. + * - SrcAddrUpdateMode: DMA_CBR1_SDEC bit + * SrcAddrUpdateMode field is supported only by 2D addressing channels. + * - DestAddrUpdateMode: DMA_CBR1_DDEC bit + * DestAddrUpdateMode field is supported only by 2D addressing channels. + */ + LL_DMA_SetBlkDataLength(DMAx, Channel, DMA_InitStruct->BlkDataLength); + + /* Check DMA channel */ + if (IS_LL_DMA_2D_CHANNEL_INSTANCE(DMAx, Channel) != 0U) + { + LL_DMA_SetBlkRptCount(DMAx, Channel, DMA_InitStruct->BlkRptCount); + LL_DMA_ConfigBlkRptAddrUpdate(DMAx, Channel, DMA_InitStruct->BlkRptSrcAddrUpdateMode | \ + DMA_InitStruct->BlkRptDestAddrUpdateMode | \ + DMA_InitStruct->SrcAddrUpdateMode | \ + DMA_InitStruct->DestAddrUpdateMode); + } + + /*-------------------------- DMAx CSAR and CDAR Configuration ---------------- + * Configure the Transfer source address with parameter : + * - SrcAddress: DMA_CSAR_SA[31:0] bits + * - DestAddress: DMA_CDAR_DA[31:0] bits + */ + LL_DMA_ConfigAddresses(DMAx, Channel, DMA_InitStruct->SrcAddress, DMA_InitStruct->DestAddress); + + /* Check DMA channel */ + if (IS_LL_DMA_2D_CHANNEL_INSTANCE(DMAx, Channel) != 0U) + { + /*------------------------ DMAx CTR3 Configuration ------------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - SrcAddrOffset: DMA_CTR3_SAO[28:16] bits + * SrcAddrOffset field is supported only by 2D addressing channels. + * - DestAddrOffset: DMA_CTR3_DAO[12:0] bits + * DestAddrOffset field is supported only by 2D addressing channels. + */ + LL_DMA_ConfigAddrUpdateValue(DMAx, Channel, DMA_InitStruct->SrcAddrOffset, DMA_InitStruct->DestAddrOffset); + + /*------------------------ DMAx CBR2 Configuration ----------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - BlkRptSrcAddrOffset: DMA_CBR2_BRSAO[15:0] bits + * BlkRptSrcAddrOffset field is supported only by 2D addressing channels. + * - BlkRptDestAddrOffset: DMA_CBR2_BRDAO[31:16] bits + * BlkRptDestAddrOffset field is supported only by 2D addressing channels. + */ + LL_DMA_ConfigBlkRptAddrUpdateValue(DMAx, Channel, DMA_InitStruct->BlkRptSrcAddrOffset, + DMA_InitStruct->BlkRptDestAddrOffset); + } + + /*-------------------------- DMAx CLLR Configuration ------------------------- + * Configure the Transfer linked list address with parameter : + * - DestAddrOffset: DMA_CLLR_LA[15:2] bits + */ + LL_DMA_SetLinkedListAddrOffset(DMAx, Channel, DMA_InitStruct->LinkedListAddrOffset); + + return (uint32_t)SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None. + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->SrcAddress = 0x00000000U; + DMA_InitStruct->DestAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_MEMORY_TO_MEMORY; + DMA_InitStruct->BlkHWRequest = LL_DMA_HWREQUEST_SINGLEBURST; + DMA_InitStruct->DataAlignment = LL_DMA_DATA_ALIGN_ZEROPADD; + DMA_InitStruct->SrcBurstLength = 1U; + DMA_InitStruct->DestBurstLength = 1U; + DMA_InitStruct->SrcDataWidth = LL_DMA_SRC_DATAWIDTH_BYTE; + DMA_InitStruct->DestDataWidth = LL_DMA_DEST_DATAWIDTH_BYTE; + DMA_InitStruct->SrcIncMode = LL_DMA_SRC_FIXED; + DMA_InitStruct->DestIncMode = LL_DMA_DEST_FIXED; + DMA_InitStruct->Priority = LL_DMA_LOW_PRIORITY_LOW_WEIGHT; + DMA_InitStruct->BlkDataLength = 0x00000000U; + DMA_InitStruct->Mode = LL_DMA_NORMAL; + DMA_InitStruct->BlkRptCount = 0x00000000U; + DMA_InitStruct->TriggerMode = LL_DMA_TRIGM_BLK_TRANSFER; + DMA_InitStruct->TriggerPolarity = LL_DMA_TRIG_POLARITY_MASKED; + DMA_InitStruct->TriggerSelection = 0x00000000U; + DMA_InitStruct->Request = 0x00000000U; + DMA_InitStruct->TransferEventMode = LL_DMA_TCEM_BLK_TRANSFER; + DMA_InitStruct->DestWordExchange = LL_DMA_DEST_WORD_PRESERVE; + DMA_InitStruct->DestHWordExchange = LL_DMA_DEST_HALFWORD_PRESERVE; + DMA_InitStruct->DestByteExchange = LL_DMA_DEST_BYTE_PRESERVE; + DMA_InitStruct->SrcByteExchange = LL_DMA_SRC_BYTE_PRESERVE; + DMA_InitStruct->SrcAllocatedPort = LL_DMA_SRC_ALLOCATED_PORT0; + DMA_InitStruct->DestAllocatedPort = LL_DMA_DEST_ALLOCATED_PORT0; + DMA_InitStruct->LinkAllocatedPort = LL_DMA_LINK_ALLOCATED_PORT0; + DMA_InitStruct->LinkStepMode = LL_DMA_LSM_FULL_EXECUTION; + DMA_InitStruct->SrcAddrUpdateMode = LL_DMA_BURST_SRC_ADDR_INCREMENT; + DMA_InitStruct->DestAddrUpdateMode = LL_DMA_BURST_DEST_ADDR_INCREMENT; + DMA_InitStruct->SrcAddrOffset = 0x00000000U; + DMA_InitStruct->DestAddrOffset = 0x00000000U; + DMA_InitStruct->BlkRptSrcAddrUpdateMode = LL_DMA_BLKRPT_SRC_ADDR_INCREMENT; + DMA_InitStruct->BlkRptDestAddrUpdateMode = LL_DMA_BLKRPT_DEST_ADDR_INCREMENT; + DMA_InitStruct->BlkRptSrcAddrOffset = 0x00000000U; + DMA_InitStruct->BlkRptDestAddrOffset = 0x00000000U; + DMA_InitStruct->LinkedListBaseAddr = 0x00000000U; + DMA_InitStruct->LinkedListAddrOffset = 0x00000000U; +} + +/** + * @brief Set each @ref LL_DMA_InitLinkedListTypeDef field to default value. + * @param DMA_InitLinkedListStruct Pointer to + * a @ref LL_DMA_InitLinkedListTypeDef structure. + * @retval None. + */ +void LL_DMA_ListStructInit(LL_DMA_InitLinkedListTypeDef *DMA_InitLinkedListStruct) +{ + /* Set LL_DMA_InitLinkedListTypeDef fields to default values */ + DMA_InitLinkedListStruct->Priority = LL_DMA_LOW_PRIORITY_LOW_WEIGHT; + DMA_InitLinkedListStruct->LinkStepMode = LL_DMA_LSM_FULL_EXECUTION; + DMA_InitLinkedListStruct->TransferEventMode = LL_DMA_TCEM_LAST_LLITEM_TRANSFER; + DMA_InitLinkedListStruct->LinkAllocatedPort = LL_DMA_LINK_ALLOCATED_PORT0; +} + +/** + * @brief De-initialize the DMA linked list. + * @note This API is used for all available DMA channels. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use + * helper macros : + * @arg @ref LL_DMA_GET_INSTANCE + * @arg @ref LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @retval An ErrorStatus enumeration value: + * - SUCCESS : DMA registers are de-initialized. + * - ERROR : DMA registers are not de-initialized. + */ +uint32_t LL_DMA_List_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return LL_DMA_DeInit(DMAx, Channel); +} + +/** + * @brief Initialize the DMA linked list according to the specified parameters + * in LL_DMA_InitLinkedListTypeDef. + * @note This API is used for all available DMA channels. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use + * helper macros : + * @arg @ref LL_DMA_GET_INSTANCE + * @arg @ref LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_9 + * @arg @ref LL_DMA_CHANNEL_10 + * @arg @ref LL_DMA_CHANNEL_11 + * @arg @ref LL_DMA_CHANNEL_12 + * @arg @ref LL_DMA_CHANNEL_13 + * @arg @ref LL_DMA_CHANNEL_14 + * @arg @ref LL_DMA_CHANNEL_15 + * @param DMA_InitLinkedListStruct pointer to + * a @ref LL_DMA_InitLinkedListTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS : DMA registers are initialized. + * - ERROR : Not applicable. + */ +uint32_t LL_DMA_List_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitLinkedListTypeDef *DMA_InitLinkedListStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitLinkedListStruct */ + assert_param(IS_LL_DMA_PRIORITY(DMA_InitLinkedListStruct->Priority)); + assert_param(IS_LL_DMA_LINK_STEP_MODE(DMA_InitLinkedListStruct->LinkStepMode)); + assert_param(IS_LL_DMA_TRANSFER_EVENT_MODE(DMA_InitLinkedListStruct->TransferEventMode)); + /* Check DMA instance */ + if ((IS_LL_HPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U) || (IS_LL_GPDMA_CHANNEL_INSTANCE(DMAx, Channel) != 0U)) + { + assert_param(IS_LL_DMA_LINK_ALLOCATED_PORT(DMA_InitLinkedListStruct->LinkAllocatedPort)); + } + + /*-------------------------- DMAx CCR Configuration -------------------------- + * Configure the control parameter : + * - LinkAllocatedPort: DMA_CCR_LAP bit + * LinkAllocatedPort field is supported only by GPDMA channels. + * - LinkStepMode: DMA_CCR_LSM bit + * - Priority: DMA_CCR_PRIO [23:22] bits + */ + LL_DMA_ConfigControl(DMAx, Channel, DMA_InitLinkedListStruct->Priority | \ + DMA_InitLinkedListStruct->LinkAllocatedPort | \ + DMA_InitLinkedListStruct->LinkStepMode); + + /*-------------------------- DMAx CTR2 Configuration ------------------------- + * Configure the channel transfer parameter : + * - TransferEventMode: DMA_CTR2_TCEM [31:30] bits + */ + LL_DMA_SetTransferEventMode(DMAx, Channel, DMA_InitLinkedListStruct->TransferEventMode); + + return (uint32_t)SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitNodeTypeDef field to default value. + * @param DMA_InitNodeStruct Pointer to a @ref LL_DMA_InitNodeTypeDef + * structure. + * @retval None. + */ +void LL_DMA_NodeStructInit(LL_DMA_InitNodeTypeDef *DMA_InitNodeStruct) +{ + /* Set DMA_InitNodeStruct fields to default values */ + DMA_InitNodeStruct->DestAllocatedPort = LL_DMA_DEST_ALLOCATED_PORT0; + DMA_InitNodeStruct->DestWordExchange = LL_DMA_DEST_WORD_PRESERVE; + DMA_InitNodeStruct->DestHWordExchange = LL_DMA_DEST_HALFWORD_PRESERVE; + DMA_InitNodeStruct->DestByteExchange = LL_DMA_DEST_BYTE_PRESERVE; + DMA_InitNodeStruct->DestBurstLength = 1U; + DMA_InitNodeStruct->DestIncMode = LL_DMA_DEST_FIXED; + DMA_InitNodeStruct->DestDataWidth = LL_DMA_DEST_DATAWIDTH_BYTE; + DMA_InitNodeStruct->SrcAllocatedPort = LL_DMA_SRC_ALLOCATED_PORT0; + DMA_InitNodeStruct->SrcByteExchange = LL_DMA_SRC_BYTE_PRESERVE; + DMA_InitNodeStruct->DataAlignment = LL_DMA_DATA_ALIGN_ZEROPADD; + DMA_InitNodeStruct->SrcBurstLength = 1U; + DMA_InitNodeStruct->SrcIncMode = LL_DMA_SRC_FIXED; + DMA_InitNodeStruct->SrcDataWidth = LL_DMA_SRC_DATAWIDTH_BYTE; + DMA_InitNodeStruct->TransferEventMode = LL_DMA_TCEM_BLK_TRANSFER; + DMA_InitNodeStruct->TriggerPolarity = LL_DMA_TRIG_POLARITY_MASKED; + DMA_InitNodeStruct->TriggerSelection = 0x00000000U; + DMA_InitNodeStruct->TriggerMode = LL_DMA_TRIGM_BLK_TRANSFER; + DMA_InitNodeStruct->BlkHWRequest = LL_DMA_HWREQUEST_SINGLEBURST; + DMA_InitNodeStruct->Direction = LL_DMA_DIRECTION_MEMORY_TO_MEMORY; + DMA_InitNodeStruct->Request = 0x00000000U; + DMA_InitNodeStruct->Mode = LL_DMA_NORMAL; + DMA_InitNodeStruct->BlkRptDestAddrUpdateMode = LL_DMA_BLKRPT_DEST_ADDR_INCREMENT; + DMA_InitNodeStruct->BlkRptSrcAddrUpdateMode = LL_DMA_BLKRPT_SRC_ADDR_INCREMENT; + DMA_InitNodeStruct->DestAddrUpdateMode = LL_DMA_BURST_DEST_ADDR_INCREMENT; + DMA_InitNodeStruct->SrcAddrUpdateMode = LL_DMA_BURST_SRC_ADDR_INCREMENT; + DMA_InitNodeStruct->BlkRptCount = 0x00000000U; + DMA_InitNodeStruct->BlkDataLength = 0x00000000U; + DMA_InitNodeStruct->SrcAddress = 0x00000000U; + DMA_InitNodeStruct->DestAddress = 0x00000000U; + DMA_InitNodeStruct->DestAddrOffset = 0x00000000U; + DMA_InitNodeStruct->SrcAddrOffset = 0x00000000U; + DMA_InitNodeStruct->BlkRptDestAddrOffset = 0x00000000U; + DMA_InitNodeStruct->BlkRptSrcAddrOffset = 0x00000000U; + DMA_InitNodeStruct->UpdateRegisters = (LL_DMA_UPDATE_CTR1 | LL_DMA_UPDATE_CTR2 | \ + LL_DMA_UPDATE_CBR1 | LL_DMA_UPDATE_CSAR | \ + LL_DMA_UPDATE_CDAR | LL_DMA_UPDATE_CTR3 | \ + LL_DMA_UPDATE_CBR2 | LL_DMA_UPDATE_CLLR); + DMA_InitNodeStruct->NodeType = LL_DMA_GPDMA_LINEAR_NODE; +} + +/** + * @brief Initializes DMA linked list node according to the specified + * parameters in the DMA_InitNodeStruct. + * @param DMA_InitNodeStruct Pointer to a LL_DMA_InitNodeTypeDef structure + * that contains linked list node + * registers configurations. + * @param pNode Pointer to linked list node to fill according to + * LL_DMA_LinkNodeTypeDef parameters. + * @retval None + */ +uint32_t LL_DMA_CreateLinkNode(const LL_DMA_InitNodeTypeDef *DMA_InitNodeStruct, LL_DMA_LinkNodeTypeDef *pNode) +{ + uint32_t reg_counter = 0U; + + /* Check the DMA Node type */ + assert_param(IS_LL_DMA_LINK_NODETYPE(DMA_InitNodeStruct->NodeType)); + + /* Check the DMA parameters from DMA_InitNodeStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitNodeStruct->Direction)); + + /* Check direction */ + if (DMA_InitNodeStruct->Direction != LL_DMA_DIRECTION_MEMORY_TO_MEMORY) + { + assert_param(IS_LL_DMA_REQUEST_SELECTION(DMA_InitNodeStruct->Request)); + } + + assert_param(IS_LL_DMA_DATA_ALIGNMENT(DMA_InitNodeStruct->DataAlignment)); + assert_param(IS_LL_DMA_SRC_DATA_WIDTH(DMA_InitNodeStruct->SrcDataWidth)); + assert_param(IS_LL_DMA_DEST_DATA_WIDTH(DMA_InitNodeStruct->DestDataWidth)); + assert_param(IS_LL_DMA_SRC_INCREMENT_MODE(DMA_InitNodeStruct->SrcIncMode)); + assert_param(IS_LL_DMA_DEST_INCREMENT_MODE(DMA_InitNodeStruct->DestIncMode)); + assert_param(IS_LL_DMA_BLK_DATALENGTH(DMA_InitNodeStruct->BlkDataLength)); + assert_param(IS_LL_DMA_TRIGGER_POLARITY(DMA_InitNodeStruct->TriggerPolarity)); + assert_param(IS_LL_DMA_BLKHW_REQUEST(DMA_InitNodeStruct->BlkHWRequest)); + assert_param(IS_LL_DMA_TRANSFER_EVENT_MODE(DMA_InitNodeStruct->TransferEventMode)); + assert_param(IS_LL_DMA_LINK_UPDATE_REGISTERS(DMA_InitNodeStruct->UpdateRegisters)); + assert_param(IS_LL_DMA_MODE(DMA_InitNodeStruct->Mode)); + + /* Check trigger polarity */ + if (DMA_InitNodeStruct->TriggerPolarity != LL_DMA_TRIG_POLARITY_MASKED) + { + assert_param(IS_LL_DMA_TRIGGER_MODE(DMA_InitNodeStruct->TriggerMode)); + assert_param(IS_LL_DMA_TRIGGER_SELECTION(DMA_InitNodeStruct->TriggerSelection)); + } + + /* Check node type */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_LINEAR_NODE) || \ + (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_LINEAR_NODE)) + { + assert_param(IS_LL_DMA_BURST_LENGTH(DMA_InitNodeStruct->SrcBurstLength)); + assert_param(IS_LL_DMA_BURST_LENGTH(DMA_InitNodeStruct->DestBurstLength)); + assert_param(IS_LL_DMA_DEST_WORD_EXCHANGE(DMA_InitNodeStruct->DestWordExchange)); + assert_param(IS_LL_DMA_DEST_HALFWORD_EXCHANGE(DMA_InitNodeStruct->DestHWordExchange)); + assert_param(IS_LL_DMA_DEST_BYTE_EXCHANGE(DMA_InitNodeStruct->DestByteExchange)); + assert_param(IS_LL_DMA_SRC_BYTE_EXCHANGE(DMA_InitNodeStruct->SrcByteExchange)); + assert_param(IS_LL_DMA_SRC_ALLOCATED_PORT(DMA_InitNodeStruct->SrcAllocatedPort)); + assert_param(IS_LL_DMA_DEST_ALLOCATED_PORT(DMA_InitNodeStruct->DestAllocatedPort)); + } + + /* Check DMA channel */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_2D_NODE) || \ + (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_2D_NODE)) + { + assert_param(IS_LL_DMA_BLK_REPEATCOUNT(DMA_InitNodeStruct->BlkRptCount)); + assert_param(IS_LL_DMA_BURST_SRC_ADDR_UPDATE(DMA_InitNodeStruct->SrcAddrUpdateMode)); + assert_param(IS_LL_DMA_BURST_DEST_ADDR_UPDATE(DMA_InitNodeStruct->DestAddrUpdateMode)); + assert_param(IS_LL_DMA_BURST_ADDR_UPDATE_VALUE(DMA_InitNodeStruct->SrcAddrOffset)); + assert_param(IS_LL_DMA_BURST_ADDR_UPDATE_VALUE(DMA_InitNodeStruct->DestAddrOffset)); + assert_param(IS_LL_DMA_BLKRPT_SRC_ADDR_UPDATE(DMA_InitNodeStruct->BlkRptSrcAddrUpdateMode)); + assert_param(IS_LL_DMA_BLKRPT_DEST_ADDR_UPDATE(DMA_InitNodeStruct->BlkRptDestAddrUpdateMode)); + assert_param(IS_LL_DMA_BLKRPT_ADDR_UPDATE_VALUE(DMA_InitNodeStruct->BlkRptSrcAddrOffset)); + assert_param(IS_LL_DMA_BLKRPT_ADDR_UPDATE_VALUE(DMA_InitNodeStruct->BlkRptDestAddrOffset)); + } + + /* Check if CTR1 register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CTR1) == LL_DMA_UPDATE_CTR1) + { + /*-------------------------- DMAx CTR1 Configuration ----------------------- + * Configure the Data transfer parameter : + * - DestAllocatedPort: DMA_CTR1_DAP bit + * - DestWordExchange: DMA_CTR1_DWX bit + * - DestHWordExchange: DMA_CTR1_DHX bit + * - DestByteExchange: DMA_CTR1_DBX bit + * - DestIncMode: DMA_CTR1_DINC bit + * - DestDataWidth: DMA_CTR1_DDW_LOG2 [17:16] bits + * - SrcAllocatedPort: DMA_CTR1_SAP bit + * - SrcByteExchange: DMA_CTR1_SBX bit + * - DataAlignment: DMA_CTR1_PAM [12:11] bits + * - SrcIncMode: DMA_CTR1_SINC bit + * - SrcDataWidth: DMA_CTR1_SDW_LOG2 [1:0] bits + * - SrcBurstLength: DMA_CTR1_SBL_1 [9:4] bits + * - DestBurstLength: DMA_CTR1_DBL_1 [25:20] bits + */ + + pNode->LinkRegisters[reg_counter] = (DMA_InitNodeStruct->DestIncMode | \ + DMA_InitNodeStruct->DestDataWidth | \ + DMA_InitNodeStruct->DataAlignment | \ + DMA_InitNodeStruct->SrcIncMode | \ + DMA_InitNodeStruct->SrcDataWidth); + + /* Update CTR1 register fields */ + pNode->LinkRegisters[reg_counter] |= (DMA_InitNodeStruct->DestAllocatedPort | \ + DMA_InitNodeStruct->DestWordExchange | \ + DMA_InitNodeStruct->DestHWordExchange | \ + DMA_InitNodeStruct->DestByteExchange | \ + ((DMA_InitNodeStruct->DestBurstLength - 1U) << DMA_CTR1_DBL_1_Pos) | \ + DMA_InitNodeStruct->SrcAllocatedPort | \ + DMA_InitNodeStruct->SrcByteExchange | \ + ((DMA_InitNodeStruct->SrcBurstLength - 1U) << DMA_CTR1_SBL_1_Pos)); + + /* Increment counter for the next register */ + reg_counter++; + } + + + /* Check if CTR2 register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CTR2) == LL_DMA_UPDATE_CTR2) + { + /*-------------------------- DMAx CTR2 Configuration ----------------------- + * Configure the channel transfer parameter : + * - TransferEventMode: DMA_CTR2_TCEM [31:30] bits + * - TriggerPolarity: DMA_CTR2_TRIGPOL [25:24] bits + * - TriggerMode: DMA_CTR2_TRIGM [15:14] bits + * - Mode: DMA_CTR2_PFREQ bit + * - BlkHWRequest: DMA_CTR2_BREQ bit + * - Direction: DMA_CTR2_DREQ bit + * - Direction: DMA_CTR2_SWREQ bit + * - TriggerSelection: DMA_CTR2_TRIGSEL [21:16] bits + * - Request: DMA_CTR2_REQSEL [6:0] bits + */ + pNode->LinkRegisters[reg_counter] = (DMA_InitNodeStruct->TransferEventMode | \ + DMA_InitNodeStruct->TriggerPolarity | \ + DMA_InitNodeStruct->BlkHWRequest | \ + DMA_InitNodeStruct->Mode | \ + DMA_InitNodeStruct->Direction); + + /* Check direction */ + if (DMA_InitNodeStruct->Direction != LL_DMA_DIRECTION_MEMORY_TO_MEMORY) + { + pNode->LinkRegisters[reg_counter] |= DMA_InitNodeStruct->Request & DMA_CTR2_REQSEL; + } + + /* Check trigger polarity */ + if (DMA_InitNodeStruct->TriggerPolarity != LL_DMA_TRIG_POLARITY_MASKED) + { + pNode->LinkRegisters[reg_counter] |= (((DMA_InitNodeStruct->TriggerSelection << DMA_CTR2_TRIGSEL_Pos) & \ + DMA_CTR2_TRIGSEL) | DMA_InitNodeStruct->TriggerMode); + } + + + /* Increment counter for the next register */ + reg_counter++; + } + + /* Check if CBR1 register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CBR1) == LL_DMA_UPDATE_CBR1) + { + /*-------------------------- DMAx CBR1 Configuration ----------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - BlkDataLength: DMA_CBR1_BNDT[15:0] bits + * - BlkRptCount: DMA_CBR1_BRC[26:16] bits + * BlkRptCount field is supported only by 2D addressing channels. + * - BlkRptSrcAddrUpdateMode: DMA_CBR1_BRSDEC bit + * BlkRptSrcAddrUpdateMode field is supported only by 2D addressing channels. + * - BlkRptDestAddrUpdateMode: DMA_CBR1_BRDDEC bit + * BlkRptDestAddrUpdateMode field is supported only by 2D addressing channels. + * - SrcAddrUpdateMode: DMA_CBR1_SDEC bit + * SrcAddrUpdateMode field is supported only by 2D addressing channels. + * - DestAddrUpdateMode: DMA_CBR1_DDEC bit + * DestAddrUpdateMode field is supported only by 2D addressing channels. + */ + pNode->LinkRegisters[reg_counter] = DMA_InitNodeStruct->BlkDataLength; + + /* Update CBR1 register fields for 2D addressing channels */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_2D_NODE) || \ + (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_2D_NODE)) + { + pNode->LinkRegisters[reg_counter] |= (DMA_InitNodeStruct->BlkRptDestAddrUpdateMode | \ + DMA_InitNodeStruct->BlkRptSrcAddrUpdateMode | \ + DMA_InitNodeStruct->DestAddrUpdateMode | \ + DMA_InitNodeStruct->SrcAddrUpdateMode | \ + ((DMA_InitNodeStruct->BlkRptCount << DMA_CBR1_BRC_Pos) & DMA_CBR1_BRC)); + } + + /* Increment counter for the next register */ + reg_counter++; + } + + /* Check if CSAR register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CSAR) == LL_DMA_UPDATE_CSAR) + { + /*-------------------------- DMAx CSAR Configuration ----------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - SrcAddress: DMA_CSAR_SA[31:0] bits + */ + pNode->LinkRegisters[reg_counter] = DMA_InitNodeStruct->SrcAddress; + + /* Increment counter for the next register */ + reg_counter++; + } + + + /* Check if CDAR register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CDAR) == LL_DMA_UPDATE_CDAR) + { + /*-------------------------- DMAx CDAR Configuration ----------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - DestAddress: DMA_CDAR_DA[31:0] bits + */ + pNode->LinkRegisters[reg_counter] = DMA_InitNodeStruct->DestAddress; + + /* Increment counter for the next register */ + reg_counter++; + } + + + /* Update CTR3 register fields for 2D addressing channels */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_2D_NODE) || (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_2D_NODE)) + { + /* Check if CTR3 register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CTR3) == LL_DMA_UPDATE_CTR3) + { + /*-------------------------- DMAx CTR3 Configuration --------------------- + * Configure the Block counters and update mode with parameter : + * - DestAddressOffset: DMA_CTR3_DAO[12:0] bits + * DestAddressOffset field is supported only by 2D addressing channels. + * - SrcAddressOffset: DMA_CTR3_SAO[12:0] bits + * SrcAddressOffset field is supported only by 2D addressing channels. + */ + pNode->LinkRegisters[reg_counter] = (DMA_InitNodeStruct->SrcAddrOffset | \ + ((DMA_InitNodeStruct->DestAddrOffset << DMA_CTR3_DAO_Pos) & DMA_CTR3_DAO)); + + /* Increment counter for the next register */ + reg_counter++; + } + } + + + /* Update CBR2 register fields for 2D addressing channels */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_2D_NODE) || (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_2D_NODE)) + { + /* Check if CBR2 register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CBR2) == LL_DMA_UPDATE_CBR2) + { + /*-------------------------- DMAx CBR2 Configuration --------------------- + * Configure the Block counters and update mode with parameter : + * - BlkRptDestAddrOffset: DMA_CBR2_BRDAO[31:16] bits + * BlkRptDestAddrOffset field is supported only by 2D addressing channels. + * - BlkRptSrcAddrOffset: DMA_CBR2_BRSAO[15:0] bits + * BlkRptSrcAddrOffset field is supported only by 2D addressing channels. + */ + pNode->LinkRegisters[reg_counter] = (DMA_InitNodeStruct->BlkRptSrcAddrOffset | \ + ((DMA_InitNodeStruct->BlkRptDestAddrOffset << DMA_CBR2_BRDAO_Pos) & \ + DMA_CBR2_BRDAO)); + + /* Increment counter for the next register */ + reg_counter++; + } + } + + /* Check if CLLR register update is enabled */ + if ((DMA_InitNodeStruct->UpdateRegisters & LL_DMA_UPDATE_CLLR) == LL_DMA_UPDATE_CLLR) + { + /*-------------------------- DMAx CLLR Configuration ----------------------- + * Configure the Transfer Block counters and update mode with parameter : + * - UpdateRegisters DMA_CLLR_UT1 bit + * - UpdateRegisters DMA_CLLR_UT2 bit + * - UpdateRegisters DMA_CLLR_UB1 bit + * - UpdateRegisters DMA_CLLR_USA bit + * - UpdateRegisters DMA_CLLR_UDA bit + * - UpdateRegisters DMA_CLLR_UT3 bit + * DMA_CLLR_UT3 bit is discarded for linear addressing channels. + * - UpdateRegisters DMA_CLLR_UB2 bit + * DMA_CLLR_UB2 bit is discarded for linear addressing channels. + * - UpdateRegisters DMA_CLLR_ULL bit + */ + pNode->LinkRegisters[reg_counter] = ((DMA_InitNodeStruct->UpdateRegisters & (DMA_CLLR_UT1 | DMA_CLLR_UT2 | \ + DMA_CLLR_UB1 | DMA_CLLR_USA | \ + DMA_CLLR_UDA | DMA_CLLR_ULL))); + + /* Update CLLR register fields for 2D addressing channels */ + if ((DMA_InitNodeStruct->NodeType == LL_DMA_HPDMA_2D_NODE) || \ + (DMA_InitNodeStruct->NodeType == LL_DMA_GPDMA_2D_NODE)) + { + pNode->LinkRegisters[reg_counter] |= (DMA_InitNodeStruct->UpdateRegisters & (DMA_CLLR_UT3 | DMA_CLLR_UB2)); + } + } + + return (uint32_t)SUCCESS; +} + +/** + * @brief Connect Linked list Nodes. + * @param pPrevLinkNode Pointer to previous linked list node to be connected to new Linked list node. + * @param PrevNodeCLLRIdx Offset of Previous Node CLLR register. + * This parameter can be a value of @ref DMA_LL_EC_CLLR_OFFSET. + * @param pNewLinkNode Pointer to new Linked list. + * @param NewNodeCLLRIdx Offset of New Node CLLR register. + * This parameter can be a value of @ref DMA_LL_EC_CLLR_OFFSET. + * @retval None + */ +void LL_DMA_ConnectLinkNode(LL_DMA_LinkNodeTypeDef *pPrevLinkNode, uint32_t PrevNodeCLLRIdx, + LL_DMA_LinkNodeTypeDef *pNewLinkNode, uint32_t NewNodeCLLRIdx) +{ + pPrevLinkNode->LinkRegisters[PrevNodeCLLRIdx] = (((uint32_t)pNewLinkNode & DMA_CLLR_LA) | \ + (pNewLinkNode->LinkRegisters[NewNodeCLLRIdx] & (DMA_CLLR_UT1 | \ + DMA_CLLR_UT2 | DMA_CLLR_UB1 | DMA_CLLR_USA | DMA_CLLR_UDA | \ + DMA_CLLR_UT3 | DMA_CLLR_UB2 | DMA_CLLR_ULL))); +} + +/** + * @brief Disconnect the next linked list node. + * @param pLinkNode Pointer to linked list node to be disconnected from the next one. + * @param LinkNodeCLLRIdx Offset of Link Node CLLR register. + * @retval None. + */ +void LL_DMA_DisconnectNextLinkNode(LL_DMA_LinkNodeTypeDef *pLinkNode, uint32_t LinkNodeCLLRIdx) +{ + pLinkNode->LinkRegisters[LinkNodeCLLRIdx] = 0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* GPDMA1 || HPDMA1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma2d.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma2d.c new file mode 100644 index 000000000..b33606b3b --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_dma2d.c @@ -0,0 +1,633 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_dma2d.c + * @author MCD Application Team + * @brief DMA2D LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_dma2d.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (DMA2D) + +/** @addtogroup DMA2D_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DMA2D_LL_Private_Constants DMA2D Private Constants + * @{ + */ +#define LL_DMA2D_COLOR 0xFFU /*!< Maximum output color setting */ +#define LL_DMA2D_NUMBEROFLINES DMA2D_NLR_NL /*!< Maximum number of lines */ +#define LL_DMA2D_NUMBEROFPIXELS (DMA2D_NLR_PL >> DMA2D_NLR_PL_Pos) /*!< Maximum number of pixels per lines */ +#define LL_DMA2D_OFFSET_MAX 0x3FFFU /*!< Maximum output line offset expressed in pixels */ +#define LL_DMA2D_CLUTSIZE_MAX 0xFFU /*!< Maximum CLUT size */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA2D_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA2D_MODE(MODE) (((MODE) == LL_DMA2D_MODE_M2M) || \ + ((MODE) == LL_DMA2D_MODE_M2M_PFC) || \ + ((MODE) == LL_DMA2D_MODE_M2M_BLEND) || \ + ((MODE) == LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_FG) || \ + ((MODE) == LL_DMA2D_MODE_M2M_BLEND_FIXED_COLOR_BG) || \ + ((MODE) == LL_DMA2D_MODE_R2M)) + +#define IS_LL_DMA2D_OCMODE(MODE_ARGB) (((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB8888) || \ + ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB888) || \ + ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB565) || \ + ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB1555) || \ + ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB4444)) + +#define IS_LL_DMA2D_GREEN(GREEN) ((GREEN) <= LL_DMA2D_COLOR) +#define IS_LL_DMA2D_RED(RED) ((RED) <= LL_DMA2D_COLOR) +#define IS_LL_DMA2D_BLUE(BLUE) ((BLUE) <= LL_DMA2D_COLOR) +#define IS_LL_DMA2D_ALPHA(ALPHA) ((ALPHA) <= LL_DMA2D_COLOR) + +#define IS_LL_DMA2D_OFFSET_MODE(MODE) (((MODE) == LL_DMA2D_LINE_OFFSET_PIXELS) || \ + ((MODE) == LL_DMA2D_LINE_OFFSET_BYTES)) + +#define IS_LL_DMA2D_OFFSET(OFFSET) ((OFFSET) <= LL_DMA2D_OFFSET_MAX) + +#define IS_LL_DMA2D_LINE(LINES) ((LINES) <= LL_DMA2D_NUMBEROFLINES) +#define IS_LL_DMA2D_PIXEL(PIXELS) ((PIXELS) <= LL_DMA2D_NUMBEROFPIXELS) + +#define IS_LL_DMA2D_SWAP_MODE(MODE) (((MODE) == LL_DMA2D_SWAP_MODE_REGULAR) || \ + ((MODE) == LL_DMA2D_SWAP_MODE_TWO_BY_TWO)) + +#define IS_LL_DMA2D_ALPHAINV(ALPHA) (((ALPHA) == LL_DMA2D_ALPHA_REGULAR) || \ + ((ALPHA) == LL_DMA2D_ALPHA_INVERTED)) + +#define IS_LL_DMA2D_RBSWAP(RBSWAP) (((RBSWAP) == LL_DMA2D_RB_MODE_REGULAR) || \ + ((RBSWAP) == LL_DMA2D_RB_MODE_SWAP)) + +#define IS_LL_DMA2D_LCMODE(MODE_ARGB) (((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB8888) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB888) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB565) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB1555) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB4444) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L8) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL44) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL88) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L4) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A8) || \ + ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A4)) + +#define IS_LL_DMA2D_CLUTCMODE(CLUTCMODE) (((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_ARGB8888) || \ + ((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_RGB888)) + +#define IS_LL_DMA2D_CLUTSIZE(SIZE) ((SIZE) <= LL_DMA2D_CLUTSIZE_MAX) + +#define IS_LL_DMA2D_ALPHAMODE(MODE) (((MODE) == LL_DMA2D_ALPHA_MODE_NO_MODIF) || \ + ((MODE) == LL_DMA2D_ALPHA_MODE_REPLACE) || \ + ((MODE) == LL_DMA2D_ALPHA_MODE_COMBINE)) + +#define IS_LL_DMA2D_CHROMA_SUB_SAMPLING(CSS) (((CSS) == LL_DMA2D_CSS_444) || \ + ((CSS) == LL_DMA2D_CSS_422) || \ + ((CSS) == LL_DMA2D_CSS_420)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA2D_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions + * @{ + */ + +/** + * @brief De-initialize DMA2D registers (registers restored to their default values). + * @param DMA2Dx DMA2D Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA2D registers are de-initialized + * - ERROR: DMA2D registers are not de-initialized + */ +ErrorStatus LL_DMA2D_DeInit(const DMA2D_TypeDef *DMA2Dx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + + if (DMA2Dx == DMA2D) + { + /* Force reset of DMA2D clock */ + LL_AHB5_GRP1_ForceReset(LL_AHB5_GRP1_PERIPH_DMA2D); + + /* Release reset of DMA2D clock */ + LL_AHB5_GRP1_ReleaseReset(LL_AHB5_GRP1_PERIPH_DMA2D); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize DMA2D registers according to the specified parameters in DMA2D_InitStruct. + * @note DMA2D transfers must be disabled to set initialization bits in configuration registers, + * otherwise ERROR result is returned. + * @param DMA2Dx DMA2D Instance + * @param DMA2D_InitStruct pointer to a LL_DMA2D_InitTypeDef structure + * that contains the configuration information for the specified DMA2D peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA2D registers are initialized according to DMA2D_InitStruct content + * - ERROR: Issue occurred during DMA2D registers initialization + */ +ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct) +{ + ErrorStatus status = ERROR; + LL_DMA2D_ColorTypeDef dma2d_colorstruct; + uint32_t tmp; + uint32_t tmp1; + uint32_t tmp2; + uint32_t regMask; + uint32_t regValue; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_MODE(DMA2D_InitStruct->Mode)); + assert_param(IS_LL_DMA2D_OCMODE(DMA2D_InitStruct->ColorMode)); + assert_param(IS_LL_DMA2D_LINE(DMA2D_InitStruct->NbrOfLines)); + assert_param(IS_LL_DMA2D_PIXEL(DMA2D_InitStruct->NbrOfPixelsPerLines)); + assert_param(IS_LL_DMA2D_GREEN(DMA2D_InitStruct->OutputGreen)); + assert_param(IS_LL_DMA2D_RED(DMA2D_InitStruct->OutputRed)); + assert_param(IS_LL_DMA2D_BLUE(DMA2D_InitStruct->OutputBlue)); + assert_param(IS_LL_DMA2D_ALPHA(DMA2D_InitStruct->OutputAlpha)); + assert_param(IS_LL_DMA2D_SWAP_MODE(DMA2D_InitStruct->OutputSwapMode)); + assert_param(IS_LL_DMA2D_OFFSET_MODE(DMA2D_InitStruct->LineOffsetMode)); + assert_param(IS_LL_DMA2D_OFFSET(DMA2D_InitStruct->LineOffset)); + assert_param(IS_LL_DMA2D_ALPHAINV(DMA2D_InitStruct->AlphaInversionMode)); + assert_param(IS_LL_DMA2D_RBSWAP(DMA2D_InitStruct->RBSwapMode)); + + /* DMA2D transfers must be disabled to configure bits in initialization registers */ + tmp = LL_DMA2D_IsTransferOngoing(DMA2Dx); + tmp1 = LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2Dx); + tmp2 = LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2Dx); + if ((tmp == 0U) && (tmp1 == 0U) && (tmp2 == 0U)) + { + /* DMA2D CR register configuration -------------------------------------------*/ + MODIFY_REG(DMA2Dx->CR, (DMA2D_CR_MODE | DMA2D_CR_LOM), \ + (DMA2D_InitStruct->Mode | DMA2D_InitStruct->LineOffsetMode)); + + /* DMA2D OPFCCR register configuration ---------------------------------------*/ + regMask = DMA2D_OPFCCR_CM; + regValue = DMA2D_InitStruct->ColorMode; + + regMask |= DMA2D_OPFCCR_SB; + regValue |= DMA2D_InitStruct->OutputSwapMode; + + regMask |= (DMA2D_OPFCCR_RBS | DMA2D_OPFCCR_AI); + regValue |= (DMA2D_InitStruct->AlphaInversionMode | DMA2D_InitStruct->RBSwapMode); + + + MODIFY_REG(DMA2Dx->OPFCCR, regMask, regValue); + + /* DMA2D OOR register configuration ------------------------------------------*/ + LL_DMA2D_SetLineOffset(DMA2Dx, DMA2D_InitStruct->LineOffset); + + /* DMA2D NLR register configuration ------------------------------------------*/ + LL_DMA2D_ConfigSize(DMA2Dx, DMA2D_InitStruct->NbrOfLines, DMA2D_InitStruct->NbrOfPixelsPerLines); + + /* DMA2D OMAR register configuration ------------------------------------------*/ + LL_DMA2D_SetOutputMemAddr(DMA2Dx, DMA2D_InitStruct->OutputMemoryAddress); + + /* DMA2D OCOLR register configuration ------------------------------------------*/ + dma2d_colorstruct.ColorMode = DMA2D_InitStruct->ColorMode; + dma2d_colorstruct.OutputBlue = DMA2D_InitStruct->OutputBlue; + dma2d_colorstruct.OutputGreen = DMA2D_InitStruct->OutputGreen; + dma2d_colorstruct.OutputRed = DMA2D_InitStruct->OutputRed; + dma2d_colorstruct.OutputAlpha = DMA2D_InitStruct->OutputAlpha; + LL_DMA2D_ConfigOutputColor(DMA2Dx, &dma2d_colorstruct); + + status = SUCCESS; + } + /* If DMA2D transfers are not disabled, return ERROR */ + + return (status); +} + +/** + * @brief Set each @ref LL_DMA2D_InitTypeDef field to default value. + * @param DMA2D_InitStruct pointer to a @ref LL_DMA2D_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct) +{ + /* Set DMA2D_InitStruct fields to default values */ + DMA2D_InitStruct->Mode = LL_DMA2D_MODE_M2M; + DMA2D_InitStruct->ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB8888; + DMA2D_InitStruct->NbrOfLines = 0x0U; + DMA2D_InitStruct->NbrOfPixelsPerLines = 0x0U; + DMA2D_InitStruct->LineOffsetMode = LL_DMA2D_LINE_OFFSET_PIXELS; + DMA2D_InitStruct->LineOffset = 0x0U; + DMA2D_InitStruct->OutputBlue = 0x0U; + DMA2D_InitStruct->OutputGreen = 0x0U; + DMA2D_InitStruct->OutputRed = 0x0U; + DMA2D_InitStruct->OutputAlpha = 0x0U; + DMA2D_InitStruct->OutputMemoryAddress = 0x0U; + DMA2D_InitStruct->OutputSwapMode = LL_DMA2D_SWAP_MODE_REGULAR; + DMA2D_InitStruct->AlphaInversionMode = LL_DMA2D_ALPHA_REGULAR; + DMA2D_InitStruct->RBSwapMode = LL_DMA2D_RB_MODE_REGULAR; +} + +/** + * @brief Configure the foreground or background according to the specified parameters + * in the LL_DMA2D_LayerCfgTypeDef structure. + * @param DMA2Dx DMA2D Instance + * @param DMA2D_LayerCfg pointer to a LL_DMA2D_LayerCfgTypeDef structure that contains + * the configuration information for the specified layer. + * @param LayerIdx DMA2D Layer index. + * This parameter can be one of the following values: + * 0(background) / 1(foreground) + * @retval None + */ +void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LL_DMA2D_OFFSET(DMA2D_LayerCfg->LineOffset)); + assert_param(IS_LL_DMA2D_LCMODE(DMA2D_LayerCfg->ColorMode)); + assert_param(IS_LL_DMA2D_CLUTCMODE(DMA2D_LayerCfg->CLUTColorMode)); + assert_param(IS_LL_DMA2D_CLUTSIZE(DMA2D_LayerCfg->CLUTSize)); + assert_param(IS_LL_DMA2D_ALPHAMODE(DMA2D_LayerCfg->AlphaMode)); + assert_param(IS_LL_DMA2D_GREEN(DMA2D_LayerCfg->Green)); + assert_param(IS_LL_DMA2D_RED(DMA2D_LayerCfg->Red)); + assert_param(IS_LL_DMA2D_BLUE(DMA2D_LayerCfg->Blue)); + assert_param(IS_LL_DMA2D_ALPHA(DMA2D_LayerCfg->Alpha)); + assert_param(IS_LL_DMA2D_ALPHAINV(DMA2D_LayerCfg->AlphaInversionMode)); + assert_param(IS_LL_DMA2D_RBSWAP(DMA2D_LayerCfg->RBSwapMode)); + assert_param(IS_LL_DMA2D_CHROMA_SUB_SAMPLING(DMA2D_LayerCfg->ChromaSubSampling)); + + + if (LayerIdx == 0U) + { + /* Configure the background memory address */ + LL_DMA2D_BGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress); + + /* Configure the background line offset */ + LL_DMA2D_BGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset); + + /* Configure the background Alpha value, Alpha mode, RB swap, Alpha inversion + CLUT size, CLUT Color mode and Color mode */ + MODIFY_REG(DMA2Dx->BGPFCCR, \ + (DMA2D_BGPFCCR_ALPHA | DMA2D_BGPFCCR_RBS | DMA2D_BGPFCCR_AI | DMA2D_BGPFCCR_AM | \ + DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM | DMA2D_BGPFCCR_CM), \ + ((DMA2D_LayerCfg->Alpha << DMA2D_BGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->RBSwapMode | \ + DMA2D_LayerCfg->AlphaInversionMode | DMA2D_LayerCfg->AlphaMode | \ + (DMA2D_LayerCfg->CLUTSize << DMA2D_BGPFCCR_CS_Pos) | DMA2D_LayerCfg->CLUTColorMode | \ + DMA2D_LayerCfg->ColorMode)); + + /* Configure the background color */ + LL_DMA2D_BGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue); + + /* Configure the background CLUT memory address */ + LL_DMA2D_BGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress); + } + else + { + /* Configure the foreground memory address */ + LL_DMA2D_FGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress); + + /* Configure the foreground line offset */ + LL_DMA2D_FGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset); + + /* Configure the foreground Alpha value, Alpha mode, RB swap, Alpha inversion + CLUT size, CLUT Color mode and Color mode */ + MODIFY_REG(DMA2Dx->FGPFCCR, \ + (DMA2D_FGPFCCR_ALPHA | DMA2D_FGPFCCR_RBS | DMA2D_FGPFCCR_AI | DMA2D_FGPFCCR_CSS | DMA2D_FGPFCCR_AM | \ + DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM | DMA2D_FGPFCCR_CM), \ + ((DMA2D_LayerCfg->Alpha << DMA2D_FGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->RBSwapMode | \ + DMA2D_LayerCfg->AlphaInversionMode | DMA2D_LayerCfg->ChromaSubSampling | \ + DMA2D_LayerCfg->AlphaMode | (DMA2D_LayerCfg->CLUTSize << DMA2D_FGPFCCR_CS_Pos) | \ + DMA2D_LayerCfg->CLUTColorMode | DMA2D_LayerCfg->ColorMode)); + + /* Configure the foreground color */ + LL_DMA2D_FGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue); + + /* Configure the foreground CLUT memory address */ + LL_DMA2D_FGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress); + } +} + +/** + * @brief Set each @ref LL_DMA2D_LayerCfgTypeDef field to default value. + * @param DMA2D_LayerCfg pointer to a @ref LL_DMA2D_LayerCfgTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg) +{ + /* Set DMA2D_LayerCfg fields to default values */ + DMA2D_LayerCfg->MemoryAddress = 0x0U; + DMA2D_LayerCfg->ColorMode = LL_DMA2D_INPUT_MODE_ARGB8888; + DMA2D_LayerCfg->LineOffset = 0x0U; + DMA2D_LayerCfg->CLUTColorMode = LL_DMA2D_CLUT_COLOR_MODE_ARGB8888; + DMA2D_LayerCfg->CLUTSize = 0x0U; + DMA2D_LayerCfg->AlphaMode = LL_DMA2D_ALPHA_MODE_NO_MODIF; + DMA2D_LayerCfg->Alpha = 0x0U; + DMA2D_LayerCfg->Blue = 0x0U; + DMA2D_LayerCfg->Green = 0x0U; + DMA2D_LayerCfg->Red = 0x0U; + DMA2D_LayerCfg->CLUTMemoryAddress = 0x0U; + DMA2D_LayerCfg->AlphaInversionMode = LL_DMA2D_ALPHA_REGULAR; + DMA2D_LayerCfg->RBSwapMode = LL_DMA2D_RB_MODE_REGULAR; + DMA2D_LayerCfg->ChromaSubSampling = LL_DMA2D_CSS_444; +} + +/** + * @brief Initialize DMA2D output color register according to the specified parameters + * in DMA2D_ColorStruct. + * @param DMA2Dx DMA2D Instance + * @param DMA2D_ColorStruct pointer to a LL_DMA2D_ColorTypeDef structure that contains + * the color configuration information for the specified DMA2D peripheral. + * @retval None + */ +void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct) +{ + uint32_t outgreen; + uint32_t outred; + uint32_t outalpha; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_OCMODE(DMA2D_ColorStruct->ColorMode)); + assert_param(IS_LL_DMA2D_GREEN(DMA2D_ColorStruct->OutputGreen)); + assert_param(IS_LL_DMA2D_RED(DMA2D_ColorStruct->OutputRed)); + assert_param(IS_LL_DMA2D_BLUE(DMA2D_ColorStruct->OutputBlue)); + assert_param(IS_LL_DMA2D_ALPHA(DMA2D_ColorStruct->OutputAlpha)); + + /* DMA2D OCOLR register configuration ------------------------------------------*/ + if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) + { + outgreen = DMA2D_ColorStruct->OutputGreen << 8U; + outred = DMA2D_ColorStruct->OutputRed << 16U; + outalpha = DMA2D_ColorStruct->OutputAlpha << 24U; + } + else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) + { + outgreen = DMA2D_ColorStruct->OutputGreen << 8U; + outred = DMA2D_ColorStruct->OutputRed << 16U; + outalpha = 0x00000000U; + } + else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) + { + outgreen = DMA2D_ColorStruct->OutputGreen << 5U; + outred = DMA2D_ColorStruct->OutputRed << 11U; + outalpha = 0x00000000U; + } + else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) + { + outgreen = DMA2D_ColorStruct->OutputGreen << 5U; + outred = DMA2D_ColorStruct->OutputRed << 10U; + outalpha = DMA2D_ColorStruct->OutputAlpha << 15U; + } + else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ + { + outgreen = DMA2D_ColorStruct->OutputGreen << 4U; + outred = DMA2D_ColorStruct->OutputRed << 8U; + outalpha = DMA2D_ColorStruct->OutputAlpha << 12U; + } + LL_DMA2D_SetOutputColor(DMA2Dx, (outgreen | outred | DMA2D_ColorStruct->OutputBlue | outalpha)); +} + +/** + * @brief Return DMA2D output Blue color. + * @param DMA2Dx DMA2D Instance. + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + * @retval Output Blue color value between Min_Data=0 and Max_Data=0xFF + */ +uint32_t LL_DMA2D_GetOutputBlueColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + uint32_t color; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); + + /* DMA2D OCOLR register reading ------------------------------------------*/ + if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU)); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU)); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU)); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU)); + } + else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFU)); + } + + return color; +} + +/** + * @brief Return DMA2D output Green color. + * @param DMA2Dx DMA2D Instance. + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + * @retval Output Green color value between Min_Data=0 and Max_Data=0xFF + */ +uint32_t LL_DMA2D_GetOutputGreenColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + uint32_t color; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); + + /* DMA2D OCOLR register reading ------------------------------------------*/ + if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7E0U) >> 5U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x3E0U) >> 5U); + } + else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF0U) >> 4U); + } + + return color; +} + +/** + * @brief Return DMA2D output Red color. + * @param DMA2Dx DMA2D Instance. + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + * @retval Output Red color value between Min_Data=0 and Max_Data=0xFF + */ +uint32_t LL_DMA2D_GetOutputRedColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + uint32_t color; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); + + /* DMA2D OCOLR register reading ------------------------------------------*/ + if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF800U) >> 11U); + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7C00U) >> 10U); + } + else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF00U) >> 8U); + } + + return color; +} + +/** + * @brief Return DMA2D output Alpha color. + * @param DMA2Dx DMA2D Instance. + * @param ColorMode This parameter can be one of the following values: + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888 + * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555 + * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444 + * @retval Output Alpha color value between Min_Data=0 and Max_Data=0xFF + */ +uint32_t LL_DMA2D_GetOutputAlphaColor(const DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode) +{ + uint32_t color; + + /* Check the parameters */ + assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx)); + assert_param(IS_LL_DMA2D_OCMODE(ColorMode)); + + /* DMA2D OCOLR register reading ------------------------------------------*/ + if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF000000U) >> 24U); + } + else if ((ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) || (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)) + { + color = 0x0U; + } + else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555) + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x8000U) >> 15U); + } + else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */ + { + color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF000U) >> 12U); + } + + return color; +} + +/** + * @brief Configure DMA2D transfer size. + * @param DMA2Dx DMA2D Instance + * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF + * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF + * @retval None + */ +void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines) +{ + MODIFY_REG(DMA2Dx->NLR, (DMA2D_NLR_PL | DMA2D_NLR_NL), \ + ((NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos) | NbrOfLines)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (DMA2D) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_exti.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_exti.c new file mode 100644 index 000000000..5f2856dfa --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_exti.c @@ -0,0 +1,321 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_exti.c + * @author MCD Application Team + * @brief EXTI LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_exti.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Private_Macros + * @{ + */ + +#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U) +#define IS_LL_EXTI_LINE_32_63(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_32_63) == 0x00000000U) +#define IS_LL_EXTI_LINE_64_95(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_64_95) == 0x00000000U) + +#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \ + || ((__VALUE__) == LL_EXTI_MODE_EVENT) \ + || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT)) + + +#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the EXTI registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_EXTI_DeInit(void) +{ + /* Interrupt mask register set to default reset values */ + LL_EXTI_WriteReg(IMR1, 0xFFC00000U); + /* Event mask register set to default reset values */ + LL_EXTI_WriteReg(EMR1, 0x00000000U); + /* Rising Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(RTSR1, 0x00000000U); + /* Falling Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(FTSR1, 0x00000000U); + /* Pending register clear */ + LL_EXTI_WriteReg(PR1, 0x003FFFFFU); + + /* Interrupt mask register 2 set to default reset values */ + LL_EXTI_WriteReg(IMR2, 0xFFB5BFFBU); + /* Event mask register 2 set to default reset values */ + LL_EXTI_WriteReg(EMR2, 0x00000000U); + /* Rising Trigger selection register 2 set to default reset values */ + LL_EXTI_WriteReg(RTSR2, 0x00000000U); + /* Falling Trigger selection register 2 set to default reset values */ + LL_EXTI_WriteReg(FTSR2, 0x00000000U); + /* Pending register 2 clear */ + LL_EXTI_WriteReg(PR2, 0x004A4004U); + + /* Interrupt mask register 3 set to default reset values */ + LL_EXTI_WriteReg(IMR3, 0x00003FFFU); + /* Event mask register 3 set to default reset values */ + LL_EXTI_WriteReg(EMR3, 0x00000000U); + + return SUCCESS; +} + +/** + * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct. + * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are initialized + * - ERROR: not applicable + */ +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + ErrorStatus status = SUCCESS; + /* Check the parameters */ + assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31)); + assert_param(IS_LL_EXTI_LINE_32_63(EXTI_InitStruct->Line_32_63)); + assert_param(IS_LL_EXTI_LINE_64_95(EXTI_InitStruct->Line_64_95)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand)); + assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode)); + + /* ENABLE LineCommand */ + if (EXTI_InitStruct->LineCommand != DISABLE) + { + assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger)); + + /* Configure EXTI Lines in range from 0 to 31 */ + if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (EXTI_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING: + /* First Disable Falling Trigger on provided Lines */ + LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Rising Trigger on provided Lines */ + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_FALLING: + /* First Disable Rising Trigger on provided Lines */ + LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Falling Trigger on provided Lines */ + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_RISING_FALLING: + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + } + } + /* Configure EXTI Lines in range from 32 to 63 */ + if (EXTI_InitStruct->Line_32_63 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63); + LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63); + break; + default: + status = ERROR; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (EXTI_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING: + /* First Disable Falling Trigger on provided Lines */ + LL_EXTI_DisableFallingTrig_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_TRIGGER_FALLING: + /* First Disable Rising Trigger on provided Lines */ + LL_EXTI_DisableRisingTrig_32_63(EXTI_InitStruct->Line_32_63); + /* Then Enable Falling Trigger on provided Lines */ + LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63); + break; + case LL_EXTI_TRIGGER_RISING_FALLING: + LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63); + LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63); + break; + default: + status = ERROR; + break; + } + } + } + /* Configure EXTI Lines in range from 64 to 95 */ + if (EXTI_InitStruct->Line_64_95 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_64_95(EXTI_InitStruct->Line_64_95); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_64_95(EXTI_InitStruct->Line_64_95); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_64_95(EXTI_InitStruct->Line_64_95); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_64_95(EXTI_InitStruct->Line_64_95); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_64_95(EXTI_InitStruct->Line_64_95); + LL_EXTI_EnableEvent_64_95(EXTI_InitStruct->Line_64_95); + break; + default: + status = ERROR; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + status = ERROR; + } + } + } + /* DISABLE LineCommand */ + else + { + /* De-configure EXTI Lines in range from 0 to 31 */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + /* De-configure EXTI Lines in range from 32 to 63 */ + LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63); + LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63); + /* De-configure EXTI Lines in range from 64 to 95 */ + LL_EXTI_DisableIT_64_95(EXTI_InitStruct->Line_64_95); + LL_EXTI_DisableEvent_64_95(EXTI_InitStruct->Line_64_95); + } + return status; +} + +/** + * @brief Set each @ref LL_EXTI_InitTypeDef field to default value. + * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval None + */ +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE; + EXTI_InitStruct->Line_32_63 = LL_EXTI_LINE_NONE; + EXTI_InitStruct->Line_64_95 = LL_EXTI_LINE_NONE; + EXTI_InitStruct->LineCommand = DISABLE; + EXTI_InitStruct->Mode = LL_EXTI_MODE_IT; + EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (EXTI) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_fmc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_fmc.c new file mode 100644 index 000000000..384fcb380 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_fmc.c @@ -0,0 +1,1107 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_fmc.c + * @author MCD Application Team + * @brief FMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Memory Controller (FMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### FMC peripheral features ##### + ============================================================================== + [..] The Flexible memory controller (FMC) includes following memory controllers: + (+) The NOR/PSRAM memory controller + (+) The NAND memory controller + (+) The Synchronous DRAM (SDRAM) controller + + [..] The FMC functional block makes the interface with synchronous and asynchronous static + memories and SDRAM memories. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol + (+) to meet the access time requirements of the external memory devices + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FMC performs + only one access at a time to an external device. + The main features of the FMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM) + (++) Read-only memory (ROM) + (++) NOR Flash memory/OneNAND Flash memory + (++) PSRAM (4 memory banks) + (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of + data + (+) Interface with synchronous DRAM (SDRAM) memories + (+) Independent Chip Select control for each memory bank + (+) Independent configuration for each memory bank + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ +#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)\ + || defined(HAL_SRAM_MODULE_ENABLED) + +/** @defgroup FMC_LL FMC Low Layer + * @brief FMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup FMC_LL_Private_Constants FMC Low Layer Private Constants + * @{ + */ + +/* ----------------------- FMC registers bit mask --------------------------- */ + +/* --- BCR Register ---*/ +/* BCR register clear mask */ + +/* --- BTR Register ---*/ +/* BTR register clear mask */ +#define BTR_CLEAR_MASK ((uint32_t)(FMC_BTRx_ADDSET | FMC_BTRx_ADDHLD |\ + FMC_BTRx_DATAST | FMC_BTRx_BUSTURN |\ + FMC_BTRx_CLKDIV | FMC_BTRx_DATLAT |\ + FMC_BTRx_ACCMOD)) + +/* --- BWTR Register ---*/ +/* BWTR register clear mask */ +#if defined(FMC_BWTRx_BUSTURN) +#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\ + FMC_BWTRx_DATAST | FMC_BWTRx_BUSTURN |\ + FMC_BWTRx_ACCMOD)) +#else +#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\ + FMC_BWTRx_DATAST | FMC_BWTRx_ACCMOD)) +#endif /* FMC_BWTRx_BUSTURN */ + +/* --- PCR Register ---*/ +/* PCR register clear mask */ +#define PCR_CLEAR_MASK ((uint32_t)(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | \ + FMC_PCR_PWID | FMC_PCR_ECCEN | \ + FMC_PCR_TCLR | FMC_PCR_TAR | \ + FMC_PCR_ECCPS)) +/* --- PMEM Register ---*/ +/* PMEM register clear mask */ +#define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEM_MEMSET | FMC_PMEM_MEMWAIT |\ + FMC_PMEM_MEMHOLD | FMC_PMEM_MEMHIZ)) + +/* --- PATT Register ---*/ +/* PATT register clear mask */ +#define PATT_CLEAR_MASK ((uint32_t)(FMC_PATT_ATTSET | FMC_PATT_ATTWAIT |\ + FMC_PATT_ATTHOLD | FMC_PATT_ATTHIZ)) + + +/* --- SDCR Register ---*/ +/* SDCR register clear mask */ +#define SDCR_CLEAR_MASK ((uint32_t)(FMC_SDCRx_NC | FMC_SDCRx_NR | \ + FMC_SDCRx_MWID | FMC_SDCRx_NB | \ + FMC_SDCRx_CAS | FMC_SDCRx_WP | \ + FMC_SDCRx_SDCLK | FMC_SDCRx_RBURST | \ + FMC_SDCRx_RPIPE)) + +/* --- SDTR Register ---*/ +/* SDTR register clear mask */ +#define SDTR_CLEAR_MASK ((uint32_t)(FMC_SDTRx_TMRD | FMC_SDTRx_TXSR | \ + FMC_SDTRx_TRAS | FMC_SDTRx_TRC | \ + FMC_SDTRx_TWR | FMC_SDTRx_TRP | \ + FMC_SDTRx_TRCD)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions + * @{ + */ + + +/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions + * @brief NORSRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use NORSRAM device driver ##### + ============================================================================== + + [..] + This driver contains a set of APIs to interface with the FMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() + (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init() + (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init() + (+) FMC NORSRAM bank extended timing configuration using the function + FMC_NORSRAM_Extended_Timing_Init() + (+) FMC NORSRAM bank enable/disable write operation using the functions + FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable() + +@endverbatim + * @{ + */ + +/** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC NORSRAM interface + (+) De-initialize the FMC NORSRAM interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FMC_NORSRAM device according to the specified + * control parameters in the FMC_NORSRAM_InitTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Init Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_InitTypeDef *Init) +{ + uint32_t flashaccess; + uint32_t btcr_reg; + uint32_t mask; + + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FMC_MUX(Init->DataAddressMux)); + assert_param(IS_FMC_MEMORY(Init->MemoryType)); + assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity)); + assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst)); + assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); + assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo)); + assert_param(IS_FMC_PAGESIZE(Init->PageSize)); + + /* Disable NORSRAM Device */ + __FMC_NORSRAM_DISABLE(Device, Init->NSBank); + + /* Set NORSRAM device control parameters */ + if (Init->MemoryType == FMC_MEMORY_TYPE_NOR) + { + flashaccess = FMC_NORSRAM_FLASH_ACCESS_ENABLE; + } + else + { + flashaccess = FMC_NORSRAM_FLASH_ACCESS_DISABLE; + } + + btcr_reg = (flashaccess | \ + Init->DataAddressMux | \ + Init->MemoryType | \ + Init->MemoryDataWidth | \ + Init->BurstAccessMode | \ + Init->WaitSignalPolarity | \ + Init->WaitSignalActive | \ + Init->WriteOperation | \ + Init->WaitSignal | \ + Init->ExtendedMode | \ + Init->AsynchronousWait | \ + Init->WriteBurst); + + btcr_reg |= Init->ContinuousClock; + btcr_reg |= Init->WriteFifo; + btcr_reg |= Init->PageSize; + + mask = (FMC_BCRx_MBKEN | + FMC_BCRx_MUXEN | + FMC_BCRx_MTYP | + FMC_BCRx_MWID | + FMC_BCRx_FACCEN | + FMC_BCRx_BURSTEN | + FMC_BCRx_WAITPOL | + FMC_BCRx_WAITCFG | + FMC_BCRx_WREN | + FMC_BCRx_WAITEN | + FMC_BCRx_EXTMOD | + FMC_BCRx_ASYNCWAIT | + FMC_BCRx_CBURSTRW); + + mask |= FMC_BCR1_CCLKEN; + mask |= FMC_BCR1_WFDIS; + mask |= FMC_BCRx_CPSIZE; + + MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); + + /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ + if ((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1)) + { + MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN, Init->ContinuousClock); + } + + if (Init->NSBank != FMC_NORSRAM_BANK1) + { + /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ + SET_BIT(Device->BTCR[FMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); + } + + return HAL_OK; +} + +/** + * @brief DeInitialize the FMC_NORSRAM peripheral + * @param Device Pointer to NORSRAM device instance + * @param ExDevice Pointer to NORSRAM extended mode device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Disable the FMC_NORSRAM device */ + __FMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FMC_NORSRAM device */ + /* FMC_NORSRAM_BANK1 */ + if (Bank == FMC_NORSRAM_BANK1) + { + Device->BTCR[Bank] = 0x000030DBU; + } + /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */ + else + { + Device->BTCR[Bank] = 0x000030D2U; + } + + Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; + ExDevice->BWTR[Bank] = 0x0FFFFFFFU; + + return HAL_OK; +} + +/** + * @brief Initialize the FMC_NORSRAM Timing according to the specified + * parameters in the FMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr; + + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Set FMC_NORSRAM device timing parameters */ + Device->BTCR[Bank + 1U] = + (Timing->AddressSetupTime << FMC_BTRx_ADDSET_Pos) | + (Timing->AddressHoldTime << FMC_BTRx_ADDHLD_Pos) | + (Timing->DataSetupTime << FMC_BTRx_DATAST_Pos) | + (Timing->BusTurnAroundDuration << FMC_BTRx_BUSTURN_Pos) | + ((Timing->CLKDivision - 1U) << FMC_BTRx_CLKDIV_Pos) | + ((Timing->DataLatency - 2U) << FMC_BTRx_DATLAT_Pos) | + Timing->AccessMode; + + /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ + if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN)) + { + tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTRx_CLKDIV_Pos)); + tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos); + MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTRx_CLKDIV, tmpr); + } + + return HAL_OK; +} + +/** + * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @param ExtendedMode FMC Extended Mode + * This parameter can be one of the following values: + * @arg FMC_EXTENDED_MODE_DISABLE + * @arg FMC_EXTENDED_MODE_ENABLE + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode) +{ + /* Check the parameters */ + assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if (ExtendedMode == FMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device)); + assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); +#if defined(FMC_BWTRx_BUSTURN) + assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); +#endif /* FMC_BWTRx_BUSTURN */ + assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ +#if defined(FMC_BWTRx_BUSTURN) + MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) | + Timing->AccessMode | + ((Timing->BusTurnAroundDuration) << FMC_BWTRx_BUSTURN_Pos))); +#else /* FMC_BWTRx_BUSTURN */ + MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) | + Timing->AccessMode)); +#endif /* FMC_BWTRx_BUSTURN */ + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFFU; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Enable write operation */ + SET_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Disable write operation */ + CLEAR_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions + * @brief NAND Controller functions + * + @verbatim + ============================================================================== + ##### How to use NAND device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FMC NAND banks in order + to run the NAND external devices. + + (+) FMC NAND bank reset using the function FMC_NAND_DeInit() + (+) FMC NAND bank control configuration using the function FMC_NAND_Init() + (+) FMC NAND bank common space timing configuration using the function + FMC_NAND_CommonSpace_Timing_Init() + (+) FMC NAND bank attribute space timing configuration using the function + FMC_NAND_AttributeSpace_Timing_Init() + (+) FMC NAND bank enable/disable ECC correction feature using the functions + FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable() + (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC() + +@endverbatim + * @{ + */ + +/** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC NAND interface + (+) De-initialize the FMC NAND interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FMC_NAND device according to the specified + * control parameters in the FMC_NAND_HandleTypeDef + * @param Device Pointer to NAND device instance + * @param Init Pointer to NAND Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Init->NandBank)); + assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); + assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); + assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); + + /* NAND bank 3 registers configuration */ + MODIFY_REG(Device->PCR, PCR_CLEAR_MASK, (Init->Waitfeature | + FMC_PCR_MEMORY_TYPE_NAND | + Init->MemoryDataWidth | + Init->EccComputation | + Init->ECCPageSize | + ((Init->TCLRSetupTime) << FMC_PCR_TCLR_Pos) | + ((Init->TARSetupTime) << FMC_PCR_TAR_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FMC_NAND Common space Timing according to the specified + * parameters in the FMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* NAND bank 3 registers configuration */ + Device->PMEM =(Timing->SetupTime | + ((Timing->WaitSetupTime) << FMC_PMEM_MEMWAIT_Pos) | + ((Timing->HoldSetupTime )<< FMC_PMEM_MEMHOLD_Pos) | + ((Timing->HiZSetupTime) << FMC_PMEM_MEMHIZ_Pos)); + + return HAL_OK; +} + +/** + * @brief Initializes the FMC_NAND Attribute space Timing according to the specified + * parameters in the FMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* NAND bank 3 registers configuration */ + Device->PATT =(Timing->SetupTime | + ((Timing->WaitSetupTime) << FMC_PATT_ATTWAIT_Pos) | + ((Timing->HoldSetupTime) << FMC_PATT_ATTHOLD_Pos) | + ((Timing->HiZSetupTime) << FMC_PATT_ATTHIZ_Pos)); + + return HAL_OK; +} + +/** + * @brief DeInitializes the FMC_NAND device + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Disable the NAND Bank */ + __FMC_NAND_DISABLE(Device, Bank); + + /* De-initialize the NAND Bank */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* Set the FMC_NAND_BANK3 registers to their reset values */ + WRITE_REG(Device->PCR, 0x00000018U); + WRITE_REG(Device->SR, 0x00000040U); + WRITE_REG(Device->PMEM, 0xFCFCFCFCU); + WRITE_REG(Device->PATT, 0xFCFCFCFCU); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_FMC_NAND_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC NAND interface. + +@endverbatim + * @{ + */ + + +/** + * @brief Enables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Enable ECC feature */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + SET_BIT(Device->PCR, FMC_PCR_ECCEN); + + return HAL_OK; +} + + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Disable ECC feature */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + CLEAR_BIT(Device->PCR, FMC_PCR_ECCEN); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param ECCval Pointer to ECC value + * @param Bank NAND bank number + * @param Timeout Timeout wait value + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FIFO is empty */ + while (__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* Get the ECCR register value */ + *ECCval = (uint32_t)Device->ECCR; + + return HAL_OK; +} + +/** + * @} + */ + + + +/** @defgroup FMC_LL_SDRAM + * @brief SDRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use SDRAM device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FMC SDRAM banks in order + to run the SDRAM external devices. + + (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit() + (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init() + (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init() + (+) FMC SDRAM bank enable/disable write operation using the functions + FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable() + (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand() + +@endverbatim + * @{ + */ + +/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC SDRAM interface + (+) De-initialize the FMC SDRAM interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FMC_SDRAM device according to the specified + * control parameters in the FMC_SDRAM_InitTypeDef + * @param Device Pointer to SDRAM device instance + * @param Init Pointer to SDRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Init->SDBank)); + assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber)); + assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber)); + assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber)); + assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency)); + assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection)); + assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod)); + assert_param(IS_FMC_READ_BURST(Init->ReadBurst)); + assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay)); + + /* Set SDRAM bank configuration parameters */ + if (Init->SDBank == FMC_SDRAM_BANK1) + { + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], + SDCR_CLEAR_MASK, + (Init->ColumnBitsNumber | + Init->RowBitsNumber | + Init->MemoryDataWidth | + Init->InternalBankNumber | + Init->CASLatency | + Init->WriteProtection | + Init->SDClockPeriod | + Init->ReadBurst | + Init->ReadPipeDelay)); + } + else /* FMC_Bank2_SDRAM */ + { + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], + FMC_SDCRx_SDCLK | + FMC_SDCRx_RBURST | + FMC_SDCRx_RPIPE, + (Init->SDClockPeriod | + Init->ReadBurst | + Init->ReadPipeDelay)); + + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK2], + SDCR_CLEAR_MASK, + (Init->ColumnBitsNumber | + Init->RowBitsNumber | + Init->MemoryDataWidth | + Init->InternalBankNumber | + Init->CASLatency | + Init->WriteProtection)); + } + + return HAL_OK; +} + + +/** + * @brief Initializes the FMC_SDRAM device timing according to the specified + * parameters in the FMC_SDRAM_TimingTypeDef + * @param Device Pointer to SDRAM device instance + * @param Timing Pointer to SDRAM Timing structure + * @param Bank SDRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay)); + assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay)); + assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime)); + assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay)); + assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime)); + assert_param(IS_FMC_RP_DELAY(Timing->RPDelay)); + assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Set SDRAM device timing parameters */ + if (Bank == FMC_SDRAM_BANK1) + { + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], + SDTR_CLEAR_MASK, + (((Timing->LoadToActiveDelay) - 1U) | + (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTRx_TXSR_Pos) | + (((Timing->SelfRefreshTime) - 1U) << FMC_SDTRx_TRAS_Pos) | + (((Timing->RowCycleDelay) - 1U) << FMC_SDTRx_TRC_Pos) | + (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTRx_TWR_Pos) | + (((Timing->RPDelay) - 1U) << FMC_SDTRx_TRP_Pos) | + (((Timing->RCDDelay) - 1U) << FMC_SDTRx_TRCD_Pos))); + } + else /* FMC_Bank2_SDRAM */ + { + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], + FMC_SDTRx_TRC | + FMC_SDTRx_TRP, + (((Timing->RowCycleDelay) - 1U) << FMC_SDTRx_TRC_Pos) | + (((Timing->RPDelay) - 1U) << FMC_SDTRx_TRP_Pos)); + + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK2], + SDTR_CLEAR_MASK, + (((Timing->LoadToActiveDelay) - 1U) | + (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTRx_TXSR_Pos) | + (((Timing->SelfRefreshTime) - 1U) << FMC_SDTRx_TRAS_Pos) | + (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTRx_TWR_Pos) | + (((Timing->RCDDelay) - 1U) << FMC_SDTRx_TRCD_Pos))); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the FMC_SDRAM peripheral + * @param Device Pointer to SDRAM device instance + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* De-initialize the SDRAM device */ + Device->SDCR[Bank] = 0x000002D0U; + Device->SDTR[Bank] = 0x0FFFFFFFU; + Device->SDCMR = 0x00000000U; + Device->SDRTR = 0x00000000U; + Device->SDSR = 0x00000000U; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_SDRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC SDRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FMC_SDRAM write protection. + * @param Device Pointer to SDRAM device instance + * @param Bank SDRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Enable write protection */ + SET_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_SDRAM write protection. + * @param hsdram FMC_SDRAM handle + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Disable write protection */ + CLEAR_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Send Command to the FMC SDRAM bank + * @param Device Pointer to SDRAM device instance + * @param Command Pointer to SDRAM command structure + * @param Timing Pointer to SDRAM Timing structure + * @param Timeout Timeout wait value + * @retval HAL state + */ +HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode)); + assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget)); + assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber)); + assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition)); + + /* Set command register */ + MODIFY_REG(Device->SDCMR, (FMC_SDCMR_MODE | FMC_SDCMR_CTB2 | FMC_SDCMR_CTB1 | FMC_SDCMR_NRFS | FMC_SDCMR_MRD), + ((Command->CommandMode) | (Command->CommandTarget) | + (((Command->AutoRefreshNumber) - 1U) << FMC_SDCMR_NRFS_Pos) | + ((Command->ModeRegisterDefinition) << FMC_SDCMR_MRD_Pos))); + /* Prevent unused argument(s) compilation warning */ + UNUSED(Timeout); + return HAL_OK; +} + +/** + * @brief Program the SDRAM Memory Refresh rate. + * @param Device Pointer to SDRAM device instance + * @param RefreshRate The SDRAM refresh rate value. + * @retval HAL state + */ +HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_REFRESH_RATE(RefreshRate)); + + /* Set the refresh rate in command register */ + MODIFY_REG(Device->SDRTR, FMC_SDRTR_COUNT, (RefreshRate << FMC_SDRTR_COUNT_Pos)); + + return HAL_OK; +} + +/** + * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands. + * @param Device Pointer to SDRAM device instance + * @param AutoRefreshNumber Specifies the auto Refresh number. + * @retval None + */ +HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, + uint32_t AutoRefreshNumber) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber)); + + /* Set the Auto-refresh number in command register */ + MODIFY_REG(Device->SDCMR, FMC_SDCMR_NRFS, ((AutoRefreshNumber - 1U) << FMC_SDCMR_NRFS_Pos)); + + return HAL_OK; +} + +/** + * @brief Returns the indicated FMC SDRAM bank mode status. + * @param Device Pointer to SDRAM device instance + * @param Bank Defines the FMC SDRAM bank. This parameter can be + * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. + * @retval The FMC SDRAM bank mode status, could be on of the following values: + * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or + * FMC_SDRAM_POWER_DOWN_MODE. + */ +uint32_t FMC_SDRAM_GetModeStatus(const FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Get the corresponding bank mode */ + if (Bank == FMC_SDRAM_BANK1) + { + tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1); + } + else + { + tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2U); + } + + /* Return the mode status */ + return tmpreg; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ +/** + * @} + */ +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_gpio.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_gpio.c new file mode 100644 index 000000000..b3a6b0e60 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_gpio.c @@ -0,0 +1,299 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_gpio.c + * @author MCD Application Team + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_gpio.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || \ + defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || \ + defined (GPIOM) || defined (GPION) || defined (GPIOO) || defined (GPIOP) + +/** @addtogroup GPIO_LL + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * LL_GPIO_Init + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ +#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ + ((__VALUE__) == LL_GPIO_MODE_ANALOG)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP) ||\ + ((__VALUE__) == LL_GPIO_PULL_DOWN)) + +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 ) ||\ + ((__VALUE__) == LL_GPIO_AF_8 ) ||\ + ((__VALUE__) == LL_GPIO_AF_9 ) ||\ + ((__VALUE__) == LL_GPIO_AF_10 ) ||\ + ((__VALUE__) == LL_GPIO_AF_11 ) ||\ + ((__VALUE__) == LL_GPIO_AF_12 ) ||\ + ((__VALUE__) == LL_GPIO_AF_13 ) ||\ + ((__VALUE__) == LL_GPIO_AF_14 ) ||\ + ((__VALUE__) == LL_GPIO_AF_15 )) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(const GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOA); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOB); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOB); + } + else if (GPIOx == GPIOC) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOC); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOC); + } + else if (GPIOx == GPIOD) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOD); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOD); + } + else if (GPIOx == GPIOE) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOE); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOE); + } + else if (GPIOx == GPIOF) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOF); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOF); + } + else if (GPIOx == GPIOG) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOG); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOG); + } + else if (GPIOx == GPIOH) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOH); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOH); + } + else if (GPIOx == GPIOM) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOM); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOM); + } + else if (GPIOx == GPION) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPION); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPION); + } + else if (GPIOx == GPIOO) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOO); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOO); + } + else if (GPIOx == GPIOP) + { + LL_AHB4_GRP1_ForceReset(LL_AHB4_GRP1_PERIPH_GPIOP); + LL_AHB4_GRP1_ReleaseReset(LL_AHB4_GRP1_PERIPH_GPIOP); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, const LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinpos; + uint32_t currentpin; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + pinpos = POSITION_VAL(GPIO_InitStruct->Pin); + + /* Configure the port pins */ + while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u) + { + /* Get current io position */ + currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos); + + if (currentpin != 0x00u) + { + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Speed mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); + } + + /* Pull-up Pull down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) + { + /* Check Alternate parameter */ + assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); + + /* Alternate function configuration */ + if (currentpin < LL_GPIO_PIN_8) + { + LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + else + { + LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + } + + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + } + pinpos++; + } + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct->Alternate = LL_GPIO_AF_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || */ +/* defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || */ +/* defined (GPIOM) || defined (GPION) || defined (GPIOO) || defined (GPIOP) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i2c.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i2c.c new file mode 100644 index 000000000..808e7d0db --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i2c.c @@ -0,0 +1,232 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_i2c.c + * @author MCD Application Team + * @brief I2C LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_i2c.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_LL_Private_Macros + * @{ + */ + +#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP)) + +#define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \ + ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE)) + +#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU) + +#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU) + +#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \ + ((__VALUE__) == LL_I2C_NACK)) + +#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \ + ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the I2C registers to their default reset values. + * @param I2Cx I2C Instance. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are de-initialized + * - ERROR: I2C registers are not de-initialized + */ +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx) +{ + ErrorStatus status = SUCCESS; + + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + if (I2Cx == I2C1) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); + } + else if (I2Cx == I2C2) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2); + + } + else if (I2Cx == I2C3) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C3); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3); + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct. + * @param I2Cx I2C Instance. + * @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + /* Check the I2C parameters from I2C_InitStruct */ + assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode)); + assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter)); + assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter)); + assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1)); + assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge)); + assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize)); + + /* Disable the selected I2Cx Peripheral */ + LL_I2C_Disable(I2Cx); + + /*---------------------------- I2Cx CR1 Configuration ------------------------ + * Configure the analog and digital noise filters with parameters : + * - AnalogFilter: I2C_CR1_ANFOFF bit + * - DigitalFilter: I2C_CR1_DNF[3:0] bits + */ + LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter); + + /*---------------------------- I2Cx TIMINGR Configuration -------------------- + * Configure the SDA setup, hold time and the SCL high, low period with parameter : + * - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0], + * I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits + */ + LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing); + + /* Enable the selected I2Cx Peripheral */ + LL_I2C_Enable(I2Cx); + + /*---------------------------- I2Cx OAR1 Configuration ----------------------- + * Disable, Configure and Enable I2Cx device own address 1 with parameters : + * - OwnAddress1: I2C_OAR1_OA1[9:0] bits + * - OwnAddrSize: I2C_OAR1_OA1MODE bit + */ + LL_I2C_DisableOwnAddress1(I2Cx); + LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize); + + /* OwnAdress1 == 0 is reserved for General Call address */ + if (I2C_InitStruct->OwnAddress1 != 0U) + { + LL_I2C_EnableOwnAddress1(I2Cx); + } + + /*---------------------------- I2Cx MODE Configuration ----------------------- + * Configure I2Cx peripheral mode with parameter : + * - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits + */ + LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode); + + /*---------------------------- I2Cx CR2 Configuration ------------------------ + * Configure the ACKnowledge or Non ACKnowledge condition + * after the address receive match code or next received byte with parameter : + * - TypeAcknowledge: I2C_CR2_NACK bit + */ + LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_I2C_InitTypeDef field to default value. + * @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval None + */ +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Set I2C_InitStruct fields to default values */ + I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C; + I2C_InitStruct->Timing = 0U; + I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE; + I2C_InitStruct->DigitalFilter = 0U; + I2C_InitStruct->OwnAddress1 = 0U; + I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK; + I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i3c.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i3c.c new file mode 100644 index 000000000..bcea19132 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_i3c.c @@ -0,0 +1,197 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_i3c.c + * @author MCD Application Team + * @brief I3C LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_i3c.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (I3C1) + +/** @defgroup I3C_LL I3C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I3C_LL_Private_Macros + * @{ + */ +#define IS_LL_I3C_SDAHOLDTIME_VALUE(VALUE) (((VALUE) == LL_I3C_SDA_HOLD_TIME_0_5) || \ + ((VALUE) == LL_I3C_SDA_HOLD_TIME_1_5)) + +#define IS_LL_I3C_WAITTIME_VALUE(VALUE) (((VALUE) == LL_I3C_OWN_ACTIVITY_STATE_0) || \ + ((VALUE) == LL_I3C_OWN_ACTIVITY_STATE_1) || \ + ((VALUE) == LL_I3C_OWN_ACTIVITY_STATE_2) || \ + ((VALUE) == LL_I3C_OWN_ACTIVITY_STATE_3)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I3C_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I3C_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the I3C registers to their default reset values. + * @param I3Cx I3C Instance. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I3C registers are de-initialized + * - ERROR: I3C registers are not de-initialized + */ +ErrorStatus LL_I3C_DeInit(const I3C_TypeDef *I3Cx) +{ + ErrorStatus status = SUCCESS; + + /* Check the I3C Instance I3Cx */ + assert_param(IS_I3C_ALL_INSTANCE(I3Cx)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(I3Cx); + + /* Force reset of I3C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I3C1); + + /* Release reset of I3C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I3C1); + + return status; +} + +/** + * @brief Initialize the I3C registers according to the specified parameters in I3C_InitStruct. + * @param I3Cx I3C Instance. + * @param I3C_InitStruct pointer to a @ref LL_I3C_InitTypeDef structure. + * @param Mode I3C peripheral mode. + * This parameter can be a value of @ref I3C_LL_EC_MODE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I3C registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_I3C_Init(I3C_TypeDef *I3Cx, LL_I3C_InitTypeDef *I3C_InitStruct, uint32_t Mode) +{ + uint32_t waveform_value; + uint32_t timing_value; + + /* Check the I3C Instance I3Cx */ + assert_param(IS_I3C_ALL_INSTANCE(I3Cx)); + + /* Disable the selected I3C peripheral */ + LL_I3C_Disable(I3Cx); + + /* Check on the I3C mode: initialization depends on the mode */ + if (Mode == LL_I3C_MODE_CONTROLLER) + { + /* Check the parameters */ + assert_param(IS_LL_I3C_SDAHOLDTIME_VALUE(I3C_InitStruct->CtrlBusCharacteristic.SDAHoldTime)); + assert_param(IS_LL_I3C_WAITTIME_VALUE(I3C_InitStruct->CtrlBusCharacteristic.WaitTime)); + + /* Set Controller mode */ + LL_I3C_SetMode(I3Cx, LL_I3C_MODE_CONTROLLER); + + /*------------------ SCL signal waveform configuration : I3C timing register 0 (I3C_TIMINGR0) ------------------- */ + /* Set the controller SCL waveform */ + waveform_value = + ((uint32_t)(I3C_InitStruct->CtrlBusCharacteristic.SCLPPLowDuration) | + ((uint32_t)I3C_InitStruct->CtrlBusCharacteristic.SCLI3CHighDuration << I3C_TIMINGR0_SCLH_I3C_Pos) | + ((uint32_t)I3C_InitStruct->CtrlBusCharacteristic.SCLODLowDuration << I3C_TIMINGR0_SCLL_OD_Pos) | + ((uint32_t)I3C_InitStruct->CtrlBusCharacteristic.SCLI2CHighDuration << I3C_TIMINGR0_SCLH_I2C_Pos)); + + LL_I3C_ConfigClockWaveForm(I3Cx, waveform_value); + + /*------------------- Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ------------------------------- */ + /* Set SDA hold time, activity state, bus free duration and bus available duration */ + timing_value = ((uint32_t)(I3C_InitStruct->CtrlBusCharacteristic.SDAHoldTime) | + (uint32_t)(I3C_InitStruct->CtrlBusCharacteristic.WaitTime) | + ((uint32_t)I3C_InitStruct->CtrlBusCharacteristic.BusFreeDuration << I3C_TIMINGR1_FREE_Pos) | + (uint32_t)(I3C_InitStruct->CtrlBusCharacteristic.BusIdleDuration)); + + LL_I3C_SetCtrlBusCharacteristic(I3Cx, timing_value); + } + else + { + /* Set target mode */ + LL_I3C_SetMode(I3Cx, LL_I3C_MODE_TARGET); + + /*------------------- Timing configuration : I3C timing register 1 (I3C_TIMINGR1) ------------------------------- */ + /* Set the number of kernel clocks cycles for the bus available condition time */ + LL_I3C_SetTgtBusCharacteristic(I3Cx, I3C_InitStruct->TgtBusCharacteristic.BusAvailableDuration); + } + + /* Enable the selected I3C peripheral */ + LL_I3C_Enable(I3Cx); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_I3C_InitTypeDef field to default value. + * @param I3C_InitStruct Pointer to a @ref LL_I3C_InitTypeDef structure. + * @retval None + */ +void LL_I3C_StructInit(LL_I3C_InitTypeDef *I3C_InitStruct) +{ + /* Set I3C_InitStruct fields to default values */ + I3C_InitStruct->CtrlBusCharacteristic.SDAHoldTime = LL_I3C_SDA_HOLD_TIME_0_5; + I3C_InitStruct->CtrlBusCharacteristic.WaitTime = LL_I3C_OWN_ACTIVITY_STATE_0; + I3C_InitStruct->CtrlBusCharacteristic.SCLPPLowDuration = 0U; + I3C_InitStruct->CtrlBusCharacteristic.SCLI3CHighDuration = 0U; + I3C_InitStruct->CtrlBusCharacteristic.SCLODLowDuration = 0U; + I3C_InitStruct->CtrlBusCharacteristic.SCLI2CHighDuration = 0U; + I3C_InitStruct->CtrlBusCharacteristic.BusFreeDuration = 0U; + I3C_InitStruct->CtrlBusCharacteristic.BusIdleDuration = 0U; + I3C_InitStruct->TgtBusCharacteristic.BusAvailableDuration = 0U; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I3C1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lptim.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lptim.c new file mode 100644 index 000000000..4d4ca05cc --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lptim.c @@ -0,0 +1,206 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_lptim.c + * @author MCD Application Team + * @brief LPTIM LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_lptim.h" +#include "stm32h7rsxx_ll_bus.h" +#include "stm32h7rsxx_ll_rcc.h" + + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (LPTIM1) || defined (LPTIM2) || defined (LPTIM3) || defined (LPTIM4) || defined (LPTIM5) + +/** @addtogroup LPTIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup LPTIM_LL_Private_Macros + * @{ + */ +#define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \ + || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL)) + +#define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128)) + +#define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \ + || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE)) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup LPTIM_Private_Functions LPTIM Private Functions + * @{ + */ +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LPTIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup LPTIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set LPTIMx registers to their reset values. + * @param LPTIMx LP Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPTIMx registers are de-initialized + * - ERROR: invalid LPTIMx instance + */ +ErrorStatus LL_LPTIM_DeInit(const LPTIM_TypeDef *LPTIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(LPTIMx)); + + if (LPTIMx == LPTIM1) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1); + } + else if (LPTIMx == LPTIM2) + { + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_LPTIM2); + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_LPTIM2); + } + else if (LPTIMx == LPTIM3) + { + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_LPTIM3); + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_LPTIM3); + } + else if (LPTIMx == LPTIM4) + { + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_LPTIM4); + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_LPTIM4); + } + else if (LPTIMx == LPTIM5) + { + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_LPTIM5); + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_LPTIM5); + } + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set each fields of the LPTIM_InitStruct structure to its default + * value. + * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure + * @retval None + */ +void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct) +{ + /* Set the default configuration */ + LPTIM_InitStruct->ClockSource = LL_LPTIM_CLK_SOURCE_INTERNAL; + LPTIM_InitStruct->Prescaler = LL_LPTIM_PRESCALER_DIV1; + LPTIM_InitStruct->Waveform = LL_LPTIM_OUTPUT_WAVEFORM_PWM; +} + +/** + * @brief Configure the LPTIMx peripheral according to the specified parameters. + * @note LL_LPTIM_Init can only be called when the LPTIM instance is disabled. + * @note LPTIMx can be disabled using unitary function @ref LL_LPTIM_Disable(). + * @param LPTIMx LP Timer Instance + * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPTIMx instance has been initialized + * - ERROR: LPTIMx instance hasn't been initialized + */ +ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, const LL_LPTIM_InitTypeDef *LPTIM_InitStruct) +{ + ErrorStatus result = SUCCESS; + /* Check the parameters */ + assert_param(IS_LPTIM_INSTANCE(LPTIMx)); + assert_param(IS_LL_LPTIM_CLOCK_SOURCE(LPTIM_InitStruct->ClockSource)); + assert_param(IS_LL_LPTIM_CLOCK_PRESCALER(LPTIM_InitStruct->Prescaler)); + assert_param(IS_LL_LPTIM_WAVEFORM(LPTIM_InitStruct->Waveform)); + + /* The LPTIMx_CFGR register must only be modified when the LPTIM is disabled + (ENABLE bit is reset to 0). + */ + if (LL_LPTIM_IsEnabled(LPTIMx) == 1UL) + { + result = ERROR; + } + else + { + /* Set CKSEL bitfield according to ClockSource value */ + /* Set PRESC bitfield according to Prescaler value */ + /* Set WAVE bitfield according to Waveform value */ + MODIFY_REG(LPTIMx->CFGR, + (LPTIM_CFGR_CKSEL | LPTIM_CFGR_PRESC | LPTIM_CFGR_WAVE), + LPTIM_InitStruct->ClockSource | \ + LPTIM_InitStruct->Prescaler | \ + LPTIM_InitStruct->Waveform); + } + + return result; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPTIM1 || LPTIM2 || LPTIM3 || LPTIM4 || LPTIM5 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lpuart.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lpuart.c new file mode 100644 index 000000000..8e0626937 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_lpuart.c @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_lpuart.c + * @author MCD Application Team + * @brief LPUART LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_lpuart.h" +#include "stm32h7rsxx_ll_rcc.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @addtogroup LPUART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Constants + * @{ + */ + +/* Definition of default baudrate value used for LPUART initialisation */ +#define LPUART_DEFAULT_BAUDRATE (9600U) + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of LPUART registers */ + +#define IS_LL_LPUART_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPUART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) + +/* __BAUDRATE__ Depending on constraints applicable for LPUART BRR register */ +/* value : */ +/* - fck must be in the range [3 x baudrate, 4096 x baudrate] */ +/* - LPUART_BRR register value should be >= 0x300 */ +/* - LPUART_BRR register value should be <= 0xFFFFF (20 bits) */ +/* Baudrate specified by the user should belong to [8, 41600000].*/ +#define IS_LL_LPUART_BAUDRATE(__BAUDRATE__) (((__BAUDRATE__) <= 41600000U) && ((__BAUDRATE__) >= 8U)) + +/* __VALUE__ BRR content must be greater than or equal to 0x300. */ +#define IS_LL_LPUART_BRR_MIN(__VALUE__) ((__VALUE__) >= 0x300U) + +/* __VALUE__ BRR content must be lower than or equal to 0xFFFFF. */ +#define IS_LL_LPUART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x000FFFFFU) + +#define IS_LL_LPUART_DIRECTION(__VALUE__) (((__VALUE__) == LL_LPUART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) + +#define IS_LL_LPUART_PARITY(__VALUE__) (((__VALUE__) == LL_LPUART_PARITY_NONE) \ + || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ + || ((__VALUE__) == LL_LPUART_PARITY_ODD)) + +#define IS_LL_LPUART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_LPUART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) + +#define IS_LL_LPUART_STOPBITS(__VALUE__) (((__VALUE__) == LL_LPUART_STOPBITS_1) \ + || ((__VALUE__) == LL_LPUART_STOPBITS_2)) + +#define IS_LL_LPUART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_LPUART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup LPUART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize LPUART registers (Registers restored to their default values). + * @param LPUARTx LPUART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + + if (LPUARTx == LPUART1) + { + /* Force reset of LPUART peripheral */ + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_LPUART1); + + /* Release reset of LPUART peripheral */ + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_LPUART1); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize LPUART registers according to the specified + * parameters in LPUART_InitStruct. + * @note As some bits in LPUART configuration registers can only be written when + * the LPUART is disabled (USART_CR1_UE bit =0), + * LPUART Peripheral should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0). + * @param LPUARTx LPUART Instance + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * that contains the configuration information for the specified LPUART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are initialized according to LPUART_InitStruct content + * - ERROR: Problem occurred during LPUART Registers initialization + */ +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk; + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + assert_param(IS_LL_LPUART_PRESCALER(LPUART_InitStruct->PrescalerValue)); + assert_param(IS_LL_LPUART_BAUDRATE(LPUART_InitStruct->BaudRate)); + assert_param(IS_LL_LPUART_DATAWIDTH(LPUART_InitStruct->DataWidth)); + assert_param(IS_LL_LPUART_STOPBITS(LPUART_InitStruct->StopBits)); + assert_param(IS_LL_LPUART_PARITY(LPUART_InitStruct->Parity)); + assert_param(IS_LL_LPUART_DIRECTION(LPUART_InitStruct->TransferDirection)); + assert_param(IS_LL_LPUART_HWCONTROL(LPUART_InitStruct->HardwareFlowControl)); + + /* LPUART needs to be in disabled state, in order to be able to configure some bits in + CRx registers. Otherwise (LPUART not in Disabled state) => return ERROR */ + if (LL_LPUART_IsEnabled(LPUARTx) == 0U) + { + /*---------------------------- LPUART CR1 Configuration ----------------------- + * Configure LPUARTx CR1 (LPUART Word Length, Parity and Transfer Direction bits) with parameters: + * - DataWidth: USART_CR1_M bits according to LPUART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to LPUART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to LPUART_InitStruct->TransferDirection value + */ + MODIFY_REG(LPUARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), + (LPUART_InitStruct->DataWidth | LPUART_InitStruct->Parity | LPUART_InitStruct->TransferDirection)); + + /*---------------------------- LPUART CR2 Configuration ----------------------- + * Configure LPUARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to LPUART_InitStruct->StopBits value. + */ + LL_LPUART_SetStopBitsLength(LPUARTx, LPUART_InitStruct->StopBits); + + /*---------------------------- LPUART CR3 Configuration ----------------------- + * Configure LPUARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according + * to LPUART_InitStruct->HardwareFlowControl value. + */ + LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl); + + /*---------------------------- LPUART BRR Configuration ----------------------- + * Retrieve Clock frequency used for LPUART Peripheral + */ + periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE); + + /* Configure the LPUART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (LPUART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_LPUART_SetBaudRate(LPUARTx, + periphclk, + LPUART_InitStruct->PrescalerValue, + LPUART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 0x300 */ + assert_param(IS_LL_LPUART_BRR_MIN(LPUARTx->BRR)); + + /* Check BRR is lower than or equal to 0xFFFFF */ + assert_param(IS_LL_LPUART_BRR_MAX(LPUARTx->BRR)); + } + + /*---------------------------- LPUART PRESC Configuration ----------------------- + * Configure LPUARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: LPUART_PRESC_PRESCALER bits according to LPUART_InitStruct->PrescalerValue value. + */ + LL_LPUART_SetPrescaler(LPUARTx, LPUART_InitStruct->PrescalerValue); + } + + return (status); +} + +/** + * @brief Set each @ref LL_LPUART_InitTypeDef field to default value. + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + /* Set LPUART_InitStruct fields to default values */ + LPUART_InitStruct->PrescalerValue = LL_LPUART_PRESCALER_DIV1; + LPUART_InitStruct->BaudRate = LPUART_DEFAULT_BAUDRATE; + LPUART_InitStruct->DataWidth = LL_LPUART_DATAWIDTH_8B; + LPUART_InitStruct->StopBits = LL_LPUART_STOPBITS_1; + LPUART_InitStruct->Parity = LL_LPUART_PARITY_NONE ; + LPUART_InitStruct->TransferDirection = LL_LPUART_DIRECTION_TX_RX; + LPUART_InitStruct->HardwareFlowControl = LL_LPUART_HWCONTROL_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pka.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pka.c new file mode 100644 index 000000000..f13701c68 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pka.c @@ -0,0 +1,163 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_pka.c + * @author MCD Application Team + * @brief PKA LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_pka.h" +#include "stm32h7rsxx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(PKA) + +/** @addtogroup PKA_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PKA_LL_Private_Macros PKA Private Constants + * @{ + */ +#define IS_LL_PKA_MODE(__VALUE__) (((__VALUE__)== LL_PKA_MODE_MODULAR_EXP) ||\ + ((__VALUE__) == LL_PKA_MODE_MONTGOMERY_PARAM) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_EXP_FAST) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_EXP_PROTECT) ||\ + ((__VALUE__) == LL_PKA_MODE_ECC_MUL) ||\ + ((__VALUE__) == LL_PKA_MODE_ECC_COMPLETE_ADD) ||\ + ((__VALUE__) == LL_PKA_MODE_ECDSA_SIGNATURE) ||\ + ((__VALUE__) == LL_PKA_MODE_ECDSA_VERIFICATION) ||\ + ((__VALUE__) == LL_PKA_MODE_POINT_CHECK) ||\ + ((__VALUE__) == LL_PKA_MODE_RSA_CRT_EXP) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_INV) ||\ + ((__VALUE__) == LL_PKA_MODE_ARITHMETIC_ADD) ||\ + ((__VALUE__) == LL_PKA_MODE_ARITHMETIC_SUB) ||\ + ((__VALUE__) == LL_PKA_MODE_ARITHMETIC_MUL) ||\ + ((__VALUE__) == LL_PKA_MODE_COMPARISON) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_REDUC) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_ADD) ||\ + ((__VALUE__) == LL_PKA_MODE_MODULAR_SUB) ||\ + ((__VALUE__) == LL_PKA_MODE_MONTGOMERY_MUL) ||\ + ((__VALUE__) == LL_PKA_MODE_DOUBLE_BASE_LADDER) ||\ + ((__VALUE__) == LL_PKA_MODE_ECC_PROJECTIVE_AFF)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PKA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup PKA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize PKA registers (Registers restored to their default values). + * @param PKAx PKA Instance. + * @retval ErrorStatus + * - SUCCESS: PKA registers are de-initialized + * - ERROR: PKA registers are not de-initialized + */ +ErrorStatus LL_PKA_DeInit(const PKA_TypeDef *PKAx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_PKA_ALL_INSTANCE(PKAx)); + + if (PKAx == PKA) + { + /* Force PKA reset */ + LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_PKA); + + /* Release PKA reset */ + LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_PKA); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize PKA registers according to the specified parameters in PKA_InitStruct. + * @param PKAx PKA Instance. + * @param PKA_InitStruct pointer to a @ref LL_PKA_InitTypeDef structure + * that contains the configuration information for the specified PKA peripheral. + * @retval ErrorStatus + * - SUCCESS: PKA registers are initialized according to PKA_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_PKA_Init(PKA_TypeDef *PKAx, LL_PKA_InitTypeDef *PKA_InitStruct) +{ + assert_param(IS_PKA_ALL_INSTANCE(PKAx)); + assert_param(IS_LL_PKA_MODE(PKA_InitStruct->Mode)); + + LL_PKA_Config(PKAx, PKA_InitStruct->Mode); + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_PKA_InitTypeDef field to default value. + * @param PKA_InitStruct pointer to a @ref LL_PKA_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_PKA_StructInit(LL_PKA_InitTypeDef *PKA_InitStruct) +{ + /* Reset PKA init structure parameters values */ + PKA_InitStruct->Mode = LL_PKA_MODE_MODULAR_EXP; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (PKA) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pwr.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pwr.c new file mode 100644 index 000000000..12e283549 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_pwr.c @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_pwr.c + * @author MCD Application Team + * @brief PWR LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +#if defined (USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_pwr.h" + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_LL_Exported_Functions + * @{ + */ + +/** @addtogroup PWR_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the PWR registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PWR registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_PWR_DeInit(void) +{ + /* Clear PWR low power flags */ + LL_PWR_ClearFlag_STOP_SB(); + + /* Clear PWR wake up flags */ + LL_PWR_ClearFlag_WU(); + + return SUCCESS; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (PWR) */ +/** + * @} + */ + +#endif /* defined (USE_FULL_LL_DRIVER) */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rcc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rcc.c new file mode 100644 index 000000000..87d4d6244 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rcc.c @@ -0,0 +1,1963 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_rcc.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Variables + * @{ + */ +const uint8_t LL_RCC_PrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_ADC_CLKSOURCE) + +#define IS_LL_RCC_ADF1_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADF1_CLKSOURCE)) + +#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE)) + +#define IS_LL_RCC_CLKP_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CLKP_CLKSOURCE)) + +#define IS_LL_RCC_ETH1PHY_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ETH1PHY_CLKSOURCE)) + +#define IS_LL_RCC_ETHREF_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ETHREF_CLKSOURCE)) + +#define IS_LL_RCC_FDCAN_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_FDCAN_CLKSOURCE)) + +#define IS_LL_RCC_FMC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_FMC_CLKSOURCE)) + +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_I2C23_CLKSOURCE)) + +#define IS_LL_RCC_I3C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I3C1_CLKSOURCE) + +#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPTIM23_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_LPTIM45_CLKSOURCE)) + +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) + +#define IS_LL_RCC_PSSI_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_PSSI_CLKSOURCE) + +#define IS_LL_RCC_RTC_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_RTC_CLKSOURCE) + +#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SAI1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_SAI2_CLKSOURCE)) + +#define IS_LL_RCC_SDMMC_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_SDMMC_CLKSOURCE) + +#define IS_LL_RCC_SPI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SPI1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_SPI23_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_SPI45_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_SPI6_CLKSOURCE)) + +#define IS_LL_RCC_SPDIFRX_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SPDIFRX_CLKSOURCE)) + +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_USART234578_CLKSOURCE)) + +#define IS_LL_RCC_XSPI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_XSPI1_CLKSOURCE) \ + || ((__VALUE__) == LL_RCC_XSPI2_CLKSOURCE)) + +#define IS_LL_RCC_USBPHYC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USBPHYC_CLKSOURCE)) + +#define IS_LL_RCC_OTGFS_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_OTGFS_CLKSOURCE)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +static uint32_t RCC_GetSystemClockFreq(void); +static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_GetPCLK4ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_GetPCLK5ClockFreq(uint32_t HCLK_Frequency); + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL1, PLL2 and PLL3 OFF + * - AHB, APB Bus pre-scaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @note In case the FMC or XSPI clock protection have been set, it must be disabled + * prior to calling this API. + * @warning FLASH latency must be adjusted according to the targeted system clock + * frequency and voltage scaling. + * @retval None + */ +void LL_RCC_DeInit(void) +{ + /* Increasing the CPU frequency */ + if (FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait for HSI READY bit */ + while (LL_RCC_HSI_IsReady() == 0U) + {} + + /* Reset CFGR register to select HSI as system clock */ + CLEAR_REG(RCC->CFGR); + + /* Reset CSION, CSIKERON, HSEON, HSEEXT, HSI48ON, HSIDIV, PLL1ON, PLL2ON, PLL3ON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEEXT | RCC_CR_HSIKERON | RCC_CR_HSIDIV | RCC_CR_CSION | RCC_CR_CSIKERON | \ + RCC_CR_HSI48ON | RCC_CR_PLL1ON | RCC_CR_PLL2ON | RCC_CR_PLL3ON); + + /* Wait for PLL1 READY bit to be reset */ + while (LL_RCC_PLL1_IsReady() != 0U) + {} + + /* Wait for PLL2 READY bit to be reset */ + while (LL_RCC_PLL2_IsReady() != 0U) + {} + + /* Wait for PLL3 READY bit to be reset */ + while (LL_RCC_PLL3_IsReady() != 0U) + {} + + /* Reset CDCFGR register */ + CLEAR_REG(RCC->CDCFGR); + + /* Reset BMCFGR register */ + CLEAR_REG(RCC->BMCFGR); + + /* Reset APBCFGR register */ + CLEAR_REG(RCC->APBCFGR); + + /* Reset PLLCKSELR register to default value */ + LL_RCC_WriteReg(PLLCKSELR, \ + (32U << RCC_PLLCKSELR_DIVM1_Pos) | (32U << RCC_PLLCKSELR_DIVM2_Pos) | (32U << RCC_PLLCKSELR_DIVM3_Pos)); + + /* Reset PLLCFGR register to default value */ + LL_RCC_WriteReg(PLLCFGR, 0U); + + /* Reset PLL1DIVR1/PLL1DIVR2 registers to default value */ + LL_RCC_WriteReg(PLL1DIVR1, 0x01010280U); + LL_RCC_WriteReg(PLL1DIVR2, 0x00000101U); + + /* Reset PLL1FRACR register */ + CLEAR_REG(RCC->PLL1FRACR); + + /* Reset PLL2DIVR1/PLL2DIVR2 registers to default value */ + LL_RCC_WriteReg(PLL2DIVR1, 0x01010280U); + LL_RCC_WriteReg(PLL2DIVR2, 0x00000101U); + + /* Reset PLL2FRACR register */ + CLEAR_REG(RCC->PLL2FRACR); + + /* Reset PLL2DIVR1/PLL2DIVR2 registers to default value */ + LL_RCC_WriteReg(PLL2DIVR1, 0x01010280U); + LL_RCC_WriteReg(PLL2DIVR2, 0x00000101U); + + /* Reset PLL3FRACR register */ + CLEAR_REG(RCC->PLL3FRACR); + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupts */ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC | RCC_CICR_LSERDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | \ + RCC_CICR_CSIRDYC | RCC_CICR_HSI48RDYC | RCC_CICR_PLL1RDYC | RCC_CICR_PLL2RDYC | \ + RCC_CICR_PLL3RDYC | RCC_CICR_LSECSSC | RCC_CICR_HSECSSC); + + /* Clear reset source flags */ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1, APB2, APB3 and APB4 buses clocks. + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is CSI, function returns values based on CSI_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in header file (default value + * 64 MHz) divider by HSIDIV, but the real value may vary depending on + * on the variations in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in header file (default value + * 24 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note (***) CSI_VALUE is a constant defined in header file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB, APB1, APB2, APB4 and APB5 buses clocks. + * @note Each time SYSCLK, HCLK, PCLK1, PCLK2, PCLK4 and/or PCLK5 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); + + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency); + + /* PCLK4 clock frequency */ + RCC_Clocks->PCLK4_Frequency = RCC_GetPCLK4ClockFreq(RCC_Clocks->HCLK_Frequency); + + /* PCLK5 clock frequency */ + RCC_Clocks->PCLK5_Frequency = RCC_GetPCLK5ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @brief Return PLL1 clocks frequencies + * @note LL_RCC_PERIPH_FREQUENCY_NO returned for non activated output or oscillator not ready + * @retval None + */ +void LL_RCC_GetPLL1ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks) +{ + uint32_t pllinputfreq = LL_RCC_PERIPH_FREQUENCY_NO, pllsource; + uint32_t m, n, fracn = 0U; + + /* PLL_VCO = (HSE_VALUE, CSI_VALUE or HSI_VALUE/HSIDIV) / PLLM * (PLLN + FRACN) + SYSCLK = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + pllinputfreq = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_PLLSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + pllinputfreq = CSI_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + pllinputfreq = HSE_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_NONE: + default: + /* PLL clock disabled */ + break; + } + + PLL_Clocks->PLL_P_Frequency = 0U; + PLL_Clocks->PLL_Q_Frequency = 0U; + PLL_Clocks->PLL_R_Frequency = 0U; + PLL_Clocks->PLL_S_Frequency = 0U; + PLL_Clocks->PLL_T_Frequency = 0U; + + m = LL_RCC_PLL1_GetM(); + n = LL_RCC_PLL1_GetN(); + if (LL_RCC_PLL1FRACN_IsEnabled() != 0U) + { + fracn = LL_RCC_PLL1_GetFRACN(); + } + + if (m != 0U) + { + if (LL_RCC_PLL1P_IsEnabled() != 0U) + { + PLL_Clocks->PLL_P_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL1_GetP()); + } + + if (LL_RCC_PLL1Q_IsEnabled() != 0U) + { + PLL_Clocks->PLL_Q_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL1_GetQ()); + } + + if (LL_RCC_PLL1R_IsEnabled() != 0U) + { + PLL_Clocks->PLL_R_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL1_GetR()); + } + + if (LL_RCC_PLL1S_IsEnabled() != 0U) + { + PLL_Clocks->PLL_S_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL1_GetS()); + } + } +} + +/** + * @brief Return PLL2 clocks frequencies + * @note LL_RCC_PERIPH_FREQUENCY_NO returned for non activated output or oscillator not ready + * @retval None + */ +void LL_RCC_GetPLL2ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks) +{ + uint32_t pllinputfreq = LL_RCC_PERIPH_FREQUENCY_NO, pllsource; + uint32_t m, n, fracn = 0U; + + /* PLL_VCO = (HSE_VALUE, CSI_VALUE or HSI_VALUE/HSIDIV) / PLLM * (PLLN + FRACN) + SYSCLK = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + pllinputfreq = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_PLLSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + pllinputfreq = CSI_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + pllinputfreq = HSE_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_NONE: + default: + /* PLL clock disabled */ + break; + } + + PLL_Clocks->PLL_P_Frequency = 0U; + PLL_Clocks->PLL_Q_Frequency = 0U; + PLL_Clocks->PLL_R_Frequency = 0U; + PLL_Clocks->PLL_S_Frequency = 0U; + PLL_Clocks->PLL_T_Frequency = 0U; + + m = LL_RCC_PLL2_GetM(); + n = LL_RCC_PLL2_GetN(); + if (LL_RCC_PLL2FRACN_IsEnabled() != 0U) + { + fracn = LL_RCC_PLL2_GetFRACN(); + } + + if (m != 0U) + { + if (LL_RCC_PLL2P_IsEnabled() != 0U) + { + PLL_Clocks->PLL_P_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL2_GetP()); + } + + if (LL_RCC_PLL2Q_IsEnabled() != 0U) + { + PLL_Clocks->PLL_Q_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL2_GetQ()); + } + + if (LL_RCC_PLL2R_IsEnabled() != 0U) + { + PLL_Clocks->PLL_R_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL2_GetR()); + } + + if (LL_RCC_PLL2S_IsEnabled() != 0U) + { + PLL_Clocks->PLL_S_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL2_GetS()); + } + + if (LL_RCC_PLL2T_IsEnabled() != 0U) + { + PLL_Clocks->PLL_T_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL2_GetT()); + } + } +} + +/** + * @brief Return PLL3 clocks frequencies + * @note LL_RCC_PERIPH_FREQUENCY_NO returned for non activated output or oscillator not ready + * @retval None + */ +void LL_RCC_GetPLL3ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks) +{ + uint32_t pllinputfreq = LL_RCC_PERIPH_FREQUENCY_NO, pllsource; + uint32_t m, n, fracn = 0U; + + /* PLL_VCO = (HSE_VALUE, CSI_VALUE or HSI_VALUE/HSIDIV) / PLLM * (PLLN + FRACN) + SYSCLK = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetSource(); + + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + pllinputfreq = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_PLLSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + pllinputfreq = CSI_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + pllinputfreq = HSE_VALUE; + } + break; + + case LL_RCC_PLLSOURCE_NONE: + default: + /* PLL clock disabled */ + break; + } + + PLL_Clocks->PLL_P_Frequency = 0U; + PLL_Clocks->PLL_Q_Frequency = 0U; + PLL_Clocks->PLL_R_Frequency = 0U; + PLL_Clocks->PLL_S_Frequency = 0U; + PLL_Clocks->PLL_T_Frequency = 0U; + + m = LL_RCC_PLL3_GetM(); + n = LL_RCC_PLL3_GetN(); + if (LL_RCC_PLL3FRACN_IsEnabled() != 0U) + { + fracn = LL_RCC_PLL3_GetFRACN(); + } + + if ((m != 0U) && (pllinputfreq != 0U)) + { + if (LL_RCC_PLL3P_IsEnabled() != 0U) + { + PLL_Clocks->PLL_P_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL3_GetP()); + } + + if (LL_RCC_PLL3Q_IsEnabled() != 0U) + { + PLL_Clocks->PLL_Q_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL3_GetQ()); + } + + if (LL_RCC_PLL3R_IsEnabled() != 0U) + { + PLL_Clocks->PLL_R_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL3_GetR()); + } + + if (LL_RCC_PLL3S_IsEnabled() != 0U) + { + PLL_Clocks->PLL_S_Frequency = LL_RCC_CalcPLLClockFreq(pllinputfreq, m, n, fracn, LL_RCC_PLL3_GetS()); + } + } +} + +/** + * @brief Configure Spread Spectrum used for PLL1 + * @note These bits must be written before enabling PLL1 + * @note MODPER x INCSTEP shall not exceed 2^15-1 + * @rmtoll PLL1SSCGR MODPER LL_RCC_PLL1_ConfigSpreadSpectrum\n + * PLL1SSCGR INCSTEP LL_RCC_PLL1_ConfigSpreadSpectrum\n + * PLL1SSCGR SPREADSEL LL_RCC_PLL1_ConfigSpreadSpectrum\n + * PLL1SSCGR TPDFNDIS LL_RCC_PLL1_ConfigSpreadSpectrum\n + * PLL1SSCGR RPDFNDIS LL_RCC_PLL1_ConfigSpreadSpectrum + * @param pConfig Pointer to LL_PLL_SpreadSpectrumTypeDef structure + * @retval None + */ +void LL_RCC_PLL1_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig) +{ + MODIFY_REG(RCC->PLL1SSCGR, \ + (RCC_PLL1SSCGR_MODPER | RCC_PLL1SSCGR_INCSTEP | RCC_PLL1SSCGR_SPREADSEL | \ + RCC_PLL1SSCGR_TPDFNDIS | RCC_PLL1SSCGR_RPDFNDIS), \ + (pConfig->ModulationPeriod | ((uint32_t)pConfig->IncrementStep << RCC_PLL1SSCGR_INCSTEP_Pos) | \ + pConfig->SpreadMode | pConfig->DitheringTPDFN | pConfig->DitheringRPDFN)); +} + +/** + * @brief Configure Spread Spectrum used for PLL2 + * @note These bits must be written before enabling PLL2 + * @rmtoll PLL2SSCGR MODPER LL_RCC_PLL2_ConfigSpreadSpectrum\n + * PLL2SSCGR INCSTEP LL_RCC_PLL2_ConfigSpreadSpectrum\n + * PLL2SSCGR SPREADSEL LL_RCC_PLL2_ConfigSpreadSpectrum\n + * PLL2SSCGR TPDFNDIS LL_RCC_PLL2_ConfigSpreadSpectrum\n + * PLL2SSCGR RPDFNDIS LL_RCC_PLL2_ConfigSpreadSpectrum + * @param pConfig Pointer to LL_PLL_SpreadSpectrumTypeDef structure + * @retval None + */ +void LL_RCC_PLL2_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig) +{ + MODIFY_REG(RCC->PLL2SSCGR, \ + (RCC_PLL2SSCGR_MODPER | RCC_PLL2SSCGR_INCSTEP | RCC_PLL2SSCGR_SPREADSEL | \ + RCC_PLL2SSCGR_TPDFNDIS | RCC_PLL2SSCGR_RPDFNDIS), \ + (pConfig->ModulationPeriod | ((uint32_t)pConfig->IncrementStep << RCC_PLL2SSCGR_INCSTEP_Pos) | \ + pConfig->SpreadMode | pConfig->DitheringTPDFN | pConfig->DitheringRPDFN)); +} + +/** + * @brief Configure Spread Spectrum used for PLL3 + * @note These bits must be written before enabling PLL3 + * @rmtoll PLL3SSCGR MODPER LL_RCC_PLL3_ConfigSpreadSpectrum\n + * PLL3SSCGR INCSTEP LL_RCC_PLL3_ConfigSpreadSpectrum\n + * PLL3SSCGR SPREADSEL LL_RCC_PLL3_ConfigSpreadSpectrum\n + * PLL3SSCGR TPDFNDIS LL_RCC_PLL3_ConfigSpreadSpectrum\n + * PLL3SSCGR RPDFNDIS LL_RCC_PLL3_ConfigSpreadSpectrum + * @param pConfig Pointer to LL_PLL_SpreadSpectrumTypeDef structure + * @retval None + */ +void LL_RCC_PLL3_ConfigSpreadSpectrum(const LL_PLL_SpreadSpectrumTypeDef *pConfig) +{ + MODIFY_REG(RCC->PLL3SSCGR, \ + (RCC_PLL3SSCGR_MODPER | RCC_PLL3SSCGR_INCSTEP | RCC_PLL3SSCGR_SPREADSEL | \ + RCC_PLL3SSCGR_TPDFNDIS | RCC_PLL3SSCGR_RPDFNDIS), \ + (pConfig->ModulationPeriod | ((uint32_t)pConfig->IncrementStep << RCC_PLL3SSCGR_INCSTEP_Pos) | \ + pConfig->SpreadMode | pConfig->DitheringTPDFN | pConfig->DitheringRPDFN)); +} + + +/** + * @brief Return USARTx clock frequency + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) +{ + uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); + + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART1_CLKSOURCE_PCLK2: + usart_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_USART234578_CLKSOURCE_PCLK1: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_USART1_CLKSOURCE_PLL2Q: + case LL_RCC_USART234578_CLKSOURCE_PLL2Q: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + usart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_USART1_CLKSOURCE_PLL3Q: + case LL_RCC_USART234578_CLKSOURCE_PLL3Q: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + usart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_USART1_CLKSOURCE_HSI: + case LL_RCC_USART234578_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + usart_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_USART1_CLKSOURCE_CSI: + case LL_RCC_USART234578_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + usart_frequency = CSI_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_LSE: + case LL_RCC_USART234578_CLKSOURCE_LSE: + if (LL_RCC_LSE_IsReady() != 0U) + { + usart_frequency = LSE_VALUE; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return usart_frequency; +} + +/** + * @brief Return UARTx clock frequency + * @param UARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource) +{ + uint32_t uart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(UARTxSource)); + + switch (LL_RCC_GetUSARTClockSource(UARTxSource)) + { + case LL_RCC_USART234578_CLKSOURCE_PCLK1: + uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_USART234578_CLKSOURCE_PLL2Q: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + uart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_USART234578_CLKSOURCE_PLL3Q: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + uart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_USART234578_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + uart_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_USART234578_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + uart_frequency = CSI_VALUE; + } + break; + + case LL_RCC_USART234578_CLKSOURCE_LSE: + if (LL_RCC_LSE_IsReady() != 0U) + { + uart_frequency = LSE_VALUE; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return uart_frequency; +} + +/** + * @brief Return LPUART clock frequency + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval LPUART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) +{ + uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource)); + + switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource)) + { + case LL_RCC_LPUART1_CLKSOURCE_PCLK4: + lpuart_frequency = RCC_GetPCLK4ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_LPUART1_CLKSOURCE_PLL2Q: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + lpuart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_PLL3Q: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + lpuart_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + lpuart_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + lpuart_frequency = CSI_VALUE; + } + break; + + case LL_RCC_LPUART1_CLKSOURCE_LSE: + if (LL_RCC_LSE_IsReady() != 0U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return lpuart_frequency; +} + +/** + * @brief Return I2Cx clock frequency + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C23_CLKSOURCE + * @retval I2C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) +{ + uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); + + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C1_CLKSOURCE_PCLK1: + case LL_RCC_I2C23_CLKSOURCE_PCLK1: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_I2C1_CLKSOURCE_PLL3R: + case LL_RCC_I2C23_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + i2c_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_I2C1_CLKSOURCE_HSI: + case LL_RCC_I2C23_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + i2c_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_I2C1_CLKSOURCE_CSI: + case LL_RCC_I2C23_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + i2c_frequency = CSI_VALUE; + } + break; + + default: + /* Nothing to do */ + break; + } + + return i2c_frequency; +} + +/** + * @brief Return I3Cx clock frequency + * @param I3CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I3C1_CLKSOURCE + * @retval I3C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI3CClockFreq(uint32_t I3CxSource) +{ + uint32_t i3c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_I3C_CLKSOURCE(I3CxSource)); + + switch (LL_RCC_GetI3CClockSource(I3CxSource)) + { + case LL_RCC_I3C1_CLKSOURCE_PCLK1: + i3c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_I3C1_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + i3c_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_I3C1_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + i3c_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_I3C1_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + i3c_frequency = CSI_VALUE; + } + break; + + default: + /* Nothing to do */ + break; + } + + return i3c_frequency; +} + +/** + * @brief Return LPTIMx clock frequency + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM23_CLKSOURCE + * @arg @ref LL_RCC_LPTIM45_CLKSOURCE + * @retval LPTIM clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) +{ + uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource)); + + switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource)) + { + case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: + lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_LPTIM23_CLKSOURCE_PCLK4: + case LL_RCC_LPTIM45_CLKSOURCE_PCLK4: + lptim_frequency = RCC_GetPCLK4ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_LPTIM1_CLKSOURCE_PLL2P: + case LL_RCC_LPTIM23_CLKSOURCE_PLL2P: + case LL_RCC_LPTIM45_CLKSOURCE_PLL2P: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + lptim_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_PLL3R: + case LL_RCC_LPTIM23_CLKSOURCE_PLL3R: + case LL_RCC_LPTIM45_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + lptim_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_LSE: + case LL_RCC_LPTIM23_CLKSOURCE_LSE: + case LL_RCC_LPTIM45_CLKSOURCE_LSE: + if (LL_RCC_LSE_IsReady() != 0U) + { + lptim_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_LSI: + case LL_RCC_LPTIM23_CLKSOURCE_LSI: + case LL_RCC_LPTIM45_CLKSOURCE_LSI: + if (LL_RCC_LSI_IsReady() != 0U) + { + lptim_frequency = LSI_VALUE; + } + break; + + case LL_RCC_LPTIM1_CLKSOURCE_CLKP: + case LL_RCC_LPTIM23_CLKSOURCE_CLKP: + case LL_RCC_LPTIM45_CLKSOURCE_CLKP: + lptim_frequency = LL_RCC_GetCLKPClockFreq(LL_RCC_CLKP_CLKSOURCE); + break; + + default: + /* Kernel clock disabled */ + break; + } + + return lptim_frequency; +} + +/** + * @brief Return SAIx clock frequency + * @param SAIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI2_CLKSOURCE + * @retval SAI clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource) +{ + uint32_t sai_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_SAI_CLKSOURCE(SAIxSource)); + + switch (LL_RCC_GetSAIClockSource(SAIxSource)) + { + case LL_RCC_SAI1_CLKSOURCE_PLL1Q: + case LL_RCC_SAI2_CLKSOURCE_PLL1Q: + if (LL_RCC_PLL1_IsReady() != 0U) + { + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + sai_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_SAI1_CLKSOURCE_PLL2P: + case LL_RCC_SAI2_CLKSOURCE_PLL2P: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + sai_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_SAI1_CLKSOURCE_PLL3P: + case LL_RCC_SAI2_CLKSOURCE_PLL3P: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + sai_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_SAI1_CLKSOURCE_I2S_CKIN: + case LL_RCC_SAI2_CLKSOURCE_I2S_CKIN: + sai_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_SAI1_CLKSOURCE_CLKP: + case LL_RCC_SAI2_CLKSOURCE_CLKP: + sai_frequency = LL_RCC_GetCLKPClockFreq(LL_RCC_CLKP_CLKSOURCE); + break; + + default: + /* Kernel clock disabled */ + break; + } + + return sai_frequency; +} + +/** + * @brief Return ADC clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + switch (LL_RCC_GetADCClockSource(ADCxSource)) + { + case LL_RCC_ADC_CLKSOURCE_PLL2P: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + adc_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_ADC_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + adc_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_ADC_CLKSOURCE_CLKP: + adc_frequency = LL_RCC_GetCLKPClockFreq(LL_RCC_CLKP_CLKSOURCE); + break; + + default: + /* Kernel clock disabled */ + break; + } + + return adc_frequency; +} + +/** + * @brief Return SDMMC clock frequency + * @param SDMMCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE + * @retval SDMMC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource) +{ + uint32_t sdmmc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_SDMMC_CLKSOURCE(SDMMCxSource)); + + switch (LL_RCC_GetSDMMCClockSource(SDMMCxSource)) + { + case LL_RCC_SDMMC_CLKSOURCE_PLL2S: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + sdmmc_frequency = PLL_Clocks.PLL_S_Frequency; + } + break; + + case LL_RCC_SDMMC_CLKSOURCE_PLL2T: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + sdmmc_frequency = PLL_Clocks.PLL_T_Frequency; + } + break; + + default: + /* Nothing to do */ + break; + } + + return sdmmc_frequency; +} + +/** + * @brief Return CEC clock frequency + * @param CECxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval CEC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource) +{ + uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource)); + + switch (LL_RCC_GetCECClockSource(CECxSource)) + { + case LL_RCC_CEC_CLKSOURCE_LSE: + if (LL_RCC_LSE_IsReady() != 0U) + { + cec_frequency = LSE_VALUE; + } + break; + + case LL_RCC_CEC_CLKSOURCE_LSI: + if (LL_RCC_LSI_IsReady() != 0U) + { + cec_frequency = LSI_VALUE; + } + break; + + case LL_RCC_CEC_CLKSOURCE_CSI_DIV_122: + if (LL_RCC_CSI_IsReady() != 0U) + { + cec_frequency = CSI_VALUE / 122U; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return cec_frequency; +} + +/** + * @brief Return PSSI clock frequency + * @param PSSIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PSSI_CLKSOURCE + * @retval PSSI clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetPSSIClockFreq(uint32_t PSSIxSource) +{ + uint32_t pssi_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef pll_clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_PSSI_CLKSOURCE(PSSIxSource)); + + switch (LL_RCC_GetPSSIClockSource(PSSIxSource)) + { + case LL_RCC_PSSI_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&pll_clocks); + pssi_frequency = pll_clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_PSSI_CLKSOURCE_CLKP: + pssi_frequency = LL_RCC_GetCLKPClockFreq(LL_RCC_CLKP_CLKSOURCE); + break; + + default: + /* Nothing to do */ + break; + } + + return pssi_frequency; +} + + +/** + * @brief Return USBPHYC clock frequency + * @param USBPHYCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USBPHYC_CLKSOURCE + * @retval USBPHYC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready or Disabled + */ +uint32_t LL_RCC_GetUSBPHYCClockFreq(uint32_t USBPHYCxSource) +{ + uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_USBPHYC_CLKSOURCE(USBPHYCxSource)); + + switch (LL_RCC_GetUSBPHYCClockSource(USBPHYCxSource)) + { + case LL_RCC_USBPHYC_CLKSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + usb_frequency = HSE_VALUE; + } + break; + + case LL_RCC_USBPHYC_CLKSOURCE_HSE_DIV_2: + if (LL_RCC_HSE_IsReady() != 0U) + { + usb_frequency = (HSE_VALUE / 2U); + } + break; + + case LL_RCC_USBPHYC_CLKSOURCE_PLL3Q: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + usb_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_USBPHYC_CLKSOURCE_DISABLE: + default: + /* Nothing to do */ + break; + } + + return usb_frequency; +} + +/** + * @brief Return ADF clock frequency + * @param ADFxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADF1_CLKSOURCE + * @retval ADF clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetADFClockFreq(uint32_t ADFxSource) +{ + uint32_t adf_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADF1_CLKSOURCE(ADFxSource)); + + switch (LL_RCC_GetADFClockSource(ADFxSource)) + { + case LL_RCC_ADF1_CLKSOURCE_HCLK: + adf_frequency = RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler())); + break; + + case LL_RCC_ADF1_CLKSOURCE_PLL2P: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + adf_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_ADF1_CLKSOURCE_PLL3P: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + adf_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_ADF1_CLKSOURCE_I2S_CKIN: + adf_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_ADF1_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + adf_frequency = CSI_VALUE; + } + break; + + case LL_RCC_ADF1_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + adf_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + default: + /* Nothing to do */ + break; + } + + return adf_frequency; +} + +/** + * @brief Return SPDIFRX clock frequency + * @param SPDIFRXxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX_CLKSOURCE + * @retval SPDIF clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource) +{ + uint32_t spdif_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_SPDIFRX_CLKSOURCE(SPDIFRXxSource)); + + switch (LL_RCC_GetSPDIFRXClockSource(SPDIFRXxSource)) + { + case LL_RCC_SPDIFRX_CLKSOURCE_PLL1Q: + if (LL_RCC_PLL1_IsReady() != 0U) + { + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + spdif_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_SPDIFRX_CLKSOURCE_PLL2R: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + spdif_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_SPDIFRX_CLKSOURCE_PLL3R: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + spdif_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_SPDIFRX_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + spdif_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + default: + /* Nothing to do */ + break; + } + + return spdif_frequency; +} + +/** + * @brief Return SPIx clock frequency + * @param SPIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI1_CLKSOURCE + * @arg @ref LL_RCC_SPI23_CLKSOURCE + * @arg @ref LL_RCC_SPI45_CLKSOURCE + * @arg @ref LL_RCC_SPI6_CLKSOURCE + * @retval SPI clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource) +{ + uint32_t spi_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_SPI_CLKSOURCE(SPIxSource)); + + switch (LL_RCC_GetSPIClockSource(SPIxSource)) + { + case LL_RCC_SPI1_CLKSOURCE_PLL1Q: + case LL_RCC_SPI23_CLKSOURCE_PLL1Q: + if (LL_RCC_PLL1_IsReady() != 0U) + { + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + spi_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_SPI1_CLKSOURCE_PLL2P: + case LL_RCC_SPI23_CLKSOURCE_PLL2P: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + spi_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_SPI1_CLKSOURCE_PLL3P: + case LL_RCC_SPI23_CLKSOURCE_PLL3P: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + spi_frequency = PLL_Clocks.PLL_P_Frequency; + } + break; + + case LL_RCC_SPI1_CLKSOURCE_I2S_CKIN: + case LL_RCC_SPI23_CLKSOURCE_I2S_CKIN: + spi_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_SPI1_CLKSOURCE_CLKP: + case LL_RCC_SPI23_CLKSOURCE_CLKP: + spi_frequency = LL_RCC_GetCLKPClockFreq(LL_RCC_CLKP_CLKSOURCE); + break; + + case LL_RCC_SPI45_CLKSOURCE_PCLK2: + spi_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_SPI6_CLKSOURCE_PCLK4: + spi_frequency = RCC_GetPCLK4ClockFreq(RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler()))); + break; + + case LL_RCC_SPI45_CLKSOURCE_PLL2Q: + case LL_RCC_SPI6_CLKSOURCE_PLL2Q: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + spi_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_SPI45_CLKSOURCE_PLL3Q: + case LL_RCC_SPI6_CLKSOURCE_PLL3Q: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + spi_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_SPI45_CLKSOURCE_HSI: + case LL_RCC_SPI6_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + spi_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_SPI45_CLKSOURCE_CSI: + case LL_RCC_SPI6_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + spi_frequency = CSI_VALUE; + } + break; + + case LL_RCC_SPI45_CLKSOURCE_HSE: + case LL_RCC_SPI6_CLKSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + spi_frequency = HSE_VALUE; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return spi_frequency; +} + +/** + * @brief Return ETH clock frequency + * @param ETHxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ETH1PHY_CLKSOURCE + * @retval ETH clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready or Disabled + */ +uint32_t LL_RCC_GetETHPHYClockFreq(uint32_t ETHxSource) +{ + uint32_t eth_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_ETH1PHY_CLKSOURCE(ETHxSource)); + + switch (LL_RCC_GetETHPHYClockSource(ETHxSource)) + { + case LL_RCC_ETH1PHY_CLKSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + eth_frequency = HSE_VALUE; + } + break; + + case LL_RCC_ETH1PHY_CLKSOURCE_PLL3S: + if (LL_RCC_PLL3_IsReady() != 0U) + { + LL_RCC_GetPLL3ClockFreq(&PLL_Clocks); + eth_frequency = PLL_Clocks.PLL_S_Frequency; + } + break; + + default: + /* Nothing to do */ + break; + } + + return eth_frequency; +} + + +/** + * @brief Return FDCAN clock frequency + * @param FDCANxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval FDCAN clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource) +{ + uint32_t fdcan_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_FDCAN_CLKSOURCE(FDCANxSource)); + + switch (LL_RCC_GetFDCANClockSource(FDCANxSource)) + { + case LL_RCC_FDCAN_CLKSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + fdcan_frequency = HSE_VALUE; + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_PLL1Q: + if (LL_RCC_PLL1_IsReady() != 0U) + { + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + fdcan_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_FDCAN_CLKSOURCE_PLL2Q: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + fdcan_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + default: + /* Kernel clock disabled */ + break; + } + + return fdcan_frequency; +} + +/** + * @brief Return FMC clock frequency + * @param FMCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE + * @retval FMC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetFMCClockFreq(uint32_t FMCxSource) +{ + uint32_t fmc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + uint32_t clksource; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_FMC_CLKSOURCE(FMCxSource)); + + if (LL_RCC_GetFMCSwitchPosition() == LL_RCC_SWP_FMC_HCLK_DIV4) + { + clksource = LL_RCC_FMC_CLKSOURCE_HCLK_DIV4; + } + else + { + clksource = LL_RCC_GetFMCClockSource(FMCxSource); + } + + switch (clksource) + { + case LL_RCC_FMC_CLKSOURCE_HCLK: + fmc_frequency = RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler())); + break; + + case LL_RCC_FMC_CLKSOURCE_PLL1Q: + if (LL_RCC_PLL1_IsReady() != 0U) + { + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + fmc_frequency = PLL_Clocks.PLL_Q_Frequency; + } + break; + + case LL_RCC_FMC_CLKSOURCE_PLL2R: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + fmc_frequency = PLL_Clocks.PLL_R_Frequency; + } + break; + + case LL_RCC_FMC_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + fmc_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_FMC_CLKSOURCE_HCLK_DIV4: + fmc_frequency = (RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler())) / 4U); + break; + + default: + /* Nothing to do */ + break; + } + + return fmc_frequency; +} + +/** + * @brief Return XSPI clock frequency + * @param XSPIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_XSPI1_CLKSOURCE + * @arg @ref LL_RCC_XSPI2_CLKSOURCE + * @retval XSPI clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ + +uint32_t LL_RCC_GetXSPIClockFreq(uint32_t XSPIxSource) +{ + uint32_t xspi_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + uint32_t clksource; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Check parameter */ + assert_param(IS_LL_RCC_XSPI_CLKSOURCE(XSPIxSource)); + + clksource = LL_RCC_GetXSPIClockSource(XSPIxSource); + + /* Update clock source depending on the XSPI clock switch position */ + switch (XSPIxSource) + { + case LL_RCC_XSPI1_CLKSOURCE: + if (LL_RCC_GetXSPI1SwitchPosition() == LL_RCC_SWP_XSPI1_HCLK_DIV4) + { + clksource = LL_RCC_XSPI1_CLKSOURCE_HCLK_DIV4; + } + break; + case LL_RCC_XSPI2_CLKSOURCE: + if (LL_RCC_GetXSPI2SwitchPosition() == LL_RCC_SWP_XSPI2_HCLK_DIV4) + { + clksource = LL_RCC_XSPI2_CLKSOURCE_HCLK_DIV4; + } + break; + default: + /* Do nothing */ + break; + } + + switch (clksource) + { + case LL_RCC_XSPI1_CLKSOURCE_HCLK: + case LL_RCC_XSPI2_CLKSOURCE_HCLK: + xspi_frequency = RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler())); + break; + + case LL_RCC_XSPI1_CLKSOURCE_PLL2S: + case LL_RCC_XSPI2_CLKSOURCE_PLL2S: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + xspi_frequency = PLL_Clocks.PLL_S_Frequency; + } + break; + + case LL_RCC_XSPI1_CLKSOURCE_PLL2T: + case LL_RCC_XSPI2_CLKSOURCE_PLL2T: + if (LL_RCC_PLL2_IsReady() != 0U) + { + LL_RCC_GetPLL2ClockFreq(&PLL_Clocks); + xspi_frequency = PLL_Clocks.PLL_T_Frequency; + } + break; + + case LL_RCC_XSPI1_CLKSOURCE_HCLK_DIV4: + case LL_RCC_XSPI2_CLKSOURCE_HCLK_DIV4: + xspi_frequency = (RCC_GetHCLKClockFreq(LL_RCC_CALC_SYSCLK_FREQ(RCC_GetSystemClockFreq(), LL_RCC_GetSysPrescaler())) / 4U); + break; + + default: + /* Nothing to do */ + break; + } + + return xspi_frequency; +} + +/** + * @brief Return CLKP clock frequency + * @param CLKPxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE + * @retval CLKP clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetCLKPClockFreq(uint32_t CLKPxSource) +{ + uint32_t clkp_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_CLKP_CLKSOURCE(CLKPxSource)); + + switch (LL_RCC_GetCLKPClockSource(CLKPxSource)) + { + case LL_RCC_CLKP_CLKSOURCE_HSI: + if (LL_RCC_HSI_IsReady() != 0U) + { + if (LL_RCC_HSI_IsDividerReady() != 0U) + { + clkp_frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + } + } + break; + + case LL_RCC_CLKP_CLKSOURCE_CSI: + if (LL_RCC_CSI_IsReady() != 0U) + { + clkp_frequency = CSI_VALUE; + } + break; + + case LL_RCC_CLKP_CLKSOURCE_HSE: + if (LL_RCC_HSE_IsReady() != 0U) + { + clkp_frequency = HSE_VALUE; + } + break; + + default: + /* CLKP clock disabled */ + break; + } + + return clkp_frequency; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +static uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency = 0U; + LL_PLL_ClocksTypeDef PLL_Clocks; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + /* No check on Ready: Won't be selected by hardware if not */ + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: + frequency = HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos); + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_CSI: + frequency = CSI_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: + frequency = HSE_VALUE; + break; + + case LL_RCC_SYS_CLKSOURCE_STATUS_PLL1: + LL_RCC_GetPLL1ClockFreq(&PLL_Clocks); + frequency = PLL_Clocks.PLL_P_Frequency; + break; + + default: + /* Nothing to do */ + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} + +/** + * @brief Return PCLK2 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK2 clock frequency (in Hz) + */ +static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK2 clock frequency */ + return LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler()); +} + +/** + * @brief Return PCLK4 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK4 clock frequency (in Hz) + */ +static uint32_t RCC_GetPCLK4ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK4 clock frequency */ + return LL_RCC_CALC_PCLK4_FREQ(HCLK_Frequency, LL_RCC_GetAPB4Prescaler()); +} + +/** + * @brief Return PCLK5 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK5 clock frequency (in Hz) + */ +static uint32_t RCC_GetPCLK5ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK5 clock frequency */ + return LL_RCC_CALC_PCLK5_FREQ(HCLK_Frequency, LL_RCC_GetAPB5Prescaler()); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rng.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rng.c new file mode 100644 index 000000000..ca5187035 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rng.c @@ -0,0 +1,158 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rng.c + * @author MCD Application Team + * @brief RNG LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_rng.h" +#include "stm32h7rsxx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_LL_Private_Macros RNG Private Macros + * @{ + */ +#define IS_LL_RNG_CED(__MODE__) (((__MODE__) == LL_RNG_CED_ENABLE) || \ + ((__MODE__) == LL_RNG_CED_DISABLE)) + +#define IS_LL_RNG_CLOCK_DIVIDER(__CLOCK_DIV__) ((__CLOCK_DIV__) <=0x0Fu) + + +#define IS_LL_RNG_NIST_COMPLIANCE(__NIST_COMPLIANCE__) (((__NIST_COMPLIANCE__) == LL_RNG_NIST_COMPLIANT) || \ + ((__NIST_COMPLIANCE__) == LL_RNG_NOTNIST_COMPLIANT)) + +#define IS_LL_RNG_CONFIG1 (__CONFIG1__) ((__CONFIG1__) <= 0x3FUL) + +#define IS_LL_RNG_CONFIG2 (__CONFIG2__) ((__CONFIG2__) <= 0x07UL) + +#define IS_LL_RNG_CONFIG3 (__CONFIG3__) ((__CONFIG3__) <= 0xFUL) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RNG_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize RNG registers (Registers restored to their default values). + * @param RNGx RNG Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RNG registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RNG_DeInit(const RNG_TypeDef *RNGx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(RNGx)); + if (RNGx == RNG) + { + /* Enable RNG reset state */ + LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_RNG); + + /* Release RNG from reset state */ + LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_RNG); + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize RNG registers according to the specified parameters in RNG_InitStruct. + * @param RNGx RNG Instance + * @param RNG_InitStruct pointer to a LL_RNG_InitTypeDef structure + * that contains the configuration information for the specified RNG peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RNG registers are initialized according to RNG_InitStruct content + * - ERROR: not applicable + */ +ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct) +{ + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(RNGx)); + assert_param(IS_LL_RNG_CED(RNG_InitStruct->ClockErrorDetection)); + + /* Clock Error Detection Configuration when CONDRT bit is set to 1 */ + MODIFY_REG(RNGx->CR, RNG_CR_CED | RNG_CR_CONDRST, RNG_InitStruct->ClockErrorDetection | RNG_CR_CONDRST); + /* Writing bits CONDRST=0*/ + CLEAR_BIT(RNGx->CR, RNG_CR_CONDRST); + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_RNG_InitTypeDef field to default value. + * @param RNG_InitStruct pointer to a @ref LL_RNG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct) +{ + /* Set RNG_InitStruct fields to default values */ + RNG_InitStruct->ClockErrorDetection = LL_RNG_CED_ENABLE; + +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rtc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rtc.c new file mode 100644 index 000000000..ae75f7ffa --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_rtc.c @@ -0,0 +1,850 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_rtc.c + * @author MCD Application Team + * @brief RTC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_rtc.h" +#include "stm32h7rsxx_ll_cortex.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @addtogroup RTC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Constants + * @{ + */ +/* Default values used for prescaler */ +#define RTC_ASYNCH_PRESC_DEFAULT ((uint32_t) 0x0000007FU) +#define RTC_SYNCH_PRESC_DEFAULT ((uint32_t) 0x000000FFU) + +/* Values used for timeout */ +#define RTC_INITMODE_TIMEOUT ((uint32_t) 1000U) /* 1s when tick set to 1ms */ +#define RTC_SYNCHRO_TIMEOUT ((uint32_t) 1000U) /* 1s when tick set to 1ms */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \ + || ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM)) + +#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FU) + +#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FFFU) + +#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ + || ((__VALUE__) == LL_RTC_FORMAT_BCD)) + +#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \ + || ((__VALUE__) == LL_RTC_TIME_FORMAT_PM)) + +#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U)) +#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) +#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) +#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) + +#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY)) + +#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= (uint32_t)1U) && ((__DAY__) <= (uint32_t)31U)) + +#define IS_LL_RTC_MONTH(__MONTH__) (((__MONTH__) >= 1U) && ((__MONTH__) <= 12U)) + +#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U) + +#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_ALL)) + +#define IS_LL_RTC_ALMB_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMB_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMB_MASK_ALL)) + + +#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY)) + +#define IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMB_DATEWEEKDAYSEL_WEEKDAY)) + + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes the RTC registers to their default reset values. + * @note This function does not reset the RTC Clock source and RTC Backup Data + * registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are de-initialized + * - ERROR: RTC registers are not de-initialized + */ +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) +{ + ErrorStatus status = ERROR; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + WRITE_REG(RTCx->TR, 0U); + WRITE_REG(RTCx->DR, (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + WRITE_REG(RTCx->CR, 0U); + WRITE_REG(RTCx->WUTR, RTC_WUTR_WUT); + WRITE_REG(RTCx->PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT)); + WRITE_REG(RTCx->ALRMAR, 0U); + WRITE_REG(RTCx->ALRMBR, 0U); + WRITE_REG(RTCx->SHIFTR, 0U); + WRITE_REG(RTCx->CALR, 0U); + WRITE_REG(RTCx->ALRMASSR, 0U); + WRITE_REG(RTCx->ALRMBSSR, 0U); + WRITE_REG(RTCx->PRIVCFGR, 0U); + + /* Clear some bits of RTC_ICSR and exit Initialization mode */ + CLEAR_BIT(RTCx->ICSR, RTC_ICSR_BCDU_Msk | RTC_ICSR_BIN_Msk | RTC_ICSR_INIT); + + /* Wait till the RTC RSF flag is set */ + status = LL_RTC_WaitForSynchro(RTCx); + } + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + /* DeInitialization of the TAMP registers */ + WRITE_REG(TAMP->CR1, 0U); + WRITE_REG(TAMP->CR2, 0U); + WRITE_REG(TAMP->CR3, 0U); + WRITE_REG(TAMP->CFGR, 0U); + WRITE_REG(TAMP->PRIVCFGR, 0U); + WRITE_REG(TAMP->FLTCR, 0U); + WRITE_REG(TAMP->ATCR1, 0x00070000U); + WRITE_REG(TAMP->ATCR2, 0U); + WRITE_REG(TAMP->IER, 0U); + WRITE_REG(TAMP->SCR, 0xFFFFFFFFU); + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTCx RTC Instance + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat)); + assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); + assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Set Hour Format */ + LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat); + + /* Configure Synchronous and Asynchronous prescaler factor */ + LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler); + LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_InitTypeDef field to default value. + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) +{ + /* Set RTC_InitStruct fields to default values */ + RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR; + RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; + RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT; +} + +/** + * @brief Set the RTC current time. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + } + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours, + RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds); + } + else + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). + * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24; + RTC_TimeStruct->Hours = 0U; + RTC_TimeStruct->Minutes = 0U; + RTC_TimeStruct->Seconds = 0U; +} + +/** + * @brief Set the RTC current date. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Day register is configured + * - ERROR: RTC Day register is not configured + */ +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U)) + { + RTC_DateStruct->Month = (uint8_t)((uint32_t) RTC_DateStruct->Month & (uint32_t)~(0x10U)) + 0x0AU; + } + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year)); + assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month)); + assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day)); + } + else + { + assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year))); + assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month))); + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day))); + } + assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, + RTC_DateStruct->Year); + } + else + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day), + __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), + __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00) + * @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY; + RTC_DateStruct->Day = 1U; + RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY; + RTC_DateStruct->Year = 0U; +} + +/** + * @brief Set the RTC Alarm A. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use @ref LL_RTC_ALMA_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMA registers are configured + * - ERROR: ALARMA registers are not configured + */ +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMA_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMA_EnableWeekday(RTCx); + LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set the RTC Alarm B. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (@ref LL_RTC_ALMB_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMB registers are configured + * - ERROR: ALARMB registers are not configured + */ +ErrorStatus LL_RTC_ALMB_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMB_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMB_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMB_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMB_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMB_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMB_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMB_EnableWeekday(RTCx); + LL_RTC_ALMB_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMB_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMB_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMB_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMB_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMB_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMB_MASK_NONE; +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Check if the Initialization mode is set */ + if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U) + { + /* Set the Initialization mode */ + LL_RTC_EnableInitMode(RTCx); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) +{ + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + return SUCCESS; +} + +/** + * @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; + uint32_t tmp; + ErrorStatus status = SUCCESS; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Clear RSF flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Wait the registers to be synchronised */ + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + } + + if (timeout == 0U) + { + status = ERROR; + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_sdmmc.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_sdmmc.c new file mode 100644 index 000000000..4b1850872 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_sdmmc.c @@ -0,0 +1,1907 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_sdmmc.c + * @author MCD Application Team + * @brief SDMMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the SDMMC peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### SDMMC peripheral features ##### + ============================================================================== + [..] The SD/SDMMC MMC card host interface (SDMMC) provides an interface between the AHB + peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDMMC cards and CE-ATA + devices. + + [..] The SDMMC features include the following: + (+) Full compliance with MultiMediaCard System Specification Version 4.51. Card support + for three different databus modes: 1-bit (default), 4-bit and 8-bit. + (+) Full compatibility with previous versions of MultiMediaCards (backward compatibility). + (+) Full compliance with SD memory card specifications version 4.1. + (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and + UHS-II mode not supported). + (+) Full compliance with SDIO card specification version 4.0. Card support + for two different databus modes: 1-bit (default) and 4-bit. + (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and + UHS-II mode not supported). + (+) Data transfer up to 208 Mbyte/s for the 8 bit mode. (depending maximum allowed IO speed). + (+) Data and command output enable signals to control external bidirectional drivers + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the SDMMC peripheral. + According to the device used (SD card/ MMC card / SDMMC card ...), a set of APIs + is used in the device's driver to perform SDMMC operations and functionalities. + + This driver is almost transparent for the final user, it is only used to implement other + functionalities of the external device. + + [..] + (+) The SDMMC clock is coming from output of PLL1_Q or PLL2_R. + Before start working with SDMMC peripheral make sure that the PLL is well configured. + The SDMMC peripheral uses two clock signals: + (++) PLL1_Q bus clock (default after reset) + (++) PLL2_R bus clock + + (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDMMC + peripheral. + + (+) Enable the Power ON State using the SDMMC_PowerState_ON(SDMMCx) + function and disable it using the function SDMMC_PowerState_OFF(SDMMCx). + + (+) Enable/Disable the peripheral interrupts using the macros __SDMMC_ENABLE_IT(hSDMMC, IT) + and __SDMMC_DISABLE_IT(hSDMMC, IT) if you need to use interrupt mode. + + (+) When using the DMA mode + (++) Configure the IDMA mode (Single buffer or double) + (++) Configure the buffer address + (++) Configure Data Path State Machine + + (+) To control the CPSM (Command Path State Machine) and send + commands to the card use the SDMMC_SendCommand(SDMMCx), + SDMMC_GetCommandResponse() and SDMMC_GetResponse() functions. First, user has + to fill the command structure (pointer to SDMMC_CmdInitTypeDef) according + to the selected command to be sent. + The parameters that should be filled are: + (++) Command Argument + (++) Command Index + (++) Command Response type + (++) Command Wait + (++) CPSM Status (Enable or Disable). + + -@@- To check if the command is well received, read the SDMMC_CMDRESP + register using the SDMMC_GetCommandResponse(). + The SDMMC responses registers (SDMMC_RESP1 to SDMMC_RESP2), use the + SDMMC_GetResponse() function. + + (+) To control the DPSM (Data Path State Machine) and send/receive + data to/from the card use the SDMMC_DataConfig(), SDMMC_GetDataCounter(), + SDMMC_ReadFIFO(), SDMMC_WriteFIFO() and SDMMC_GetFIFOCount() functions. + + *** Read Operations *** + ======================= + [..] + (#) First, user has to fill the data structure (pointer to + SDMMC_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be from card (To SDMMC) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to receive the data from the card + according to selected transfer mode (Refer to Step 8, 9 and 10). + + (#) Send the selected Read command (refer to step 11). + + (#) Use the SDMMC flags/interrupts to check the transfer status. + + *** Write Operations *** + ======================== + [..] + (#) First, user has to fill the data structure (pointer to + SDMMC_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be to card (To CARD) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to send the data to the card according to + selected transfer mode. + + (#) Send the selected Write command. + + (#) Use the SDMMC flags/interrupts to check the transfer status. + + *** Command management operations *** + ===================================== + [..] + (#) The commands used for Read/Write/Erase operations are managed in + separate functions. + Each function allows to send the needed command with the related argument, + then check the response. + By the same approach, you could implement a command and check the response. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_HAL_Driver + * @{ + */ + +/** @defgroup SDMMC_LL SDMMC Low Layer + * @brief Low layer module for SD + * @{ + */ + +#if defined (SDMMC1) || defined (SDMMC2) +#if defined (HAL_SD_MODULE_ENABLED) || defined (HAL_MMC_MODULE_ENABLED) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static uint32_t SDMMC_GetCmdError(SDMMC_TypeDef *SDMMCx); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SDMMC_LL_Exported_Functions SDMMC Low Layer Exported Functions + * @{ + */ + +/** @defgroup HAL_SDMMC_LL_Group1 Initialization de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDMMC according to the specified + * parameters in the SDMMC_InitTypeDef and create the associated handle. + * @param SDMMCx: Pointer to SDMMC register base + * @param Init: SDMMC initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(SDMMCx)); + assert_param(IS_SDMMC_CLOCK_EDGE(Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(Init.ClockDiv)); + + /* Set SDMMC configuration parameters */ + tmpreg |= (Init.ClockEdge | \ + Init.ClockPowerSave | \ + Init.BusWide | \ + Init.HardwareFlowControl | \ + Init.ClockDiv + ); + + /* Write to SDMMC CLKCR */ + MODIFY_REG(SDMMCx->CLKCR, CLKCR_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### I/O operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Read data (word) from Rx FIFO in blocking mode (polling) + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_ReadFIFO(const SDMMC_TypeDef *SDMMCx) +{ + /* Read data from Rx FIFO */ + return (SDMMCx->FIFO); +} + +/** + * @brief Write data (word) to Tx FIFO in blocking mode (polling) + * @param SDMMCx: Pointer to SDMMC register base + * @param pWriteData: pointer to data to write + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData) +{ + /* Write data to FIFO */ + SDMMCx->FIFO = *pWriteData; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Set SDMMC Power state to ON. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to ON */ + SDMMCx->POWER |= SDMMC_POWER_PWRCTRL; + + return HAL_OK; +} + +/** + * @brief Set SDMMC Power state to Power-Cycle. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_Cycle(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to Power Cycle*/ + SDMMCx->POWER |= SDMMC_POWER_PWRCTRL_1; + + return HAL_OK; +} + +/** + * @brief Set SDMMC Power state to OFF. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to OFF */ + SDMMCx->POWER &= ~(SDMMC_POWER_PWRCTRL); + + return HAL_OK; +} + +/** + * @brief Get SDMMC Power state. + * @param SDMMCx: Pointer to SDMMC register base + * @retval Power status of the controller. The returned value can be one of the + * following values: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDMMC_GetPowerState(const SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->POWER & SDMMC_POWER_PWRCTRL); +} + +/** + * @brief Configure the SDMMC command path according to the specified parameters in + * SDMMC_CmdInitTypeDef structure and send the command + * @param SDMMCx: Pointer to SDMMC register base + * @param Command: pointer to a SDMMC_CmdInitTypeDef structure that contains + * the configuration information for the SDMMC command + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_CMD_INDEX(Command->CmdIndex)); + assert_param(IS_SDMMC_RESPONSE(Command->Response)); + assert_param(IS_SDMMC_WAIT(Command->WaitForInterrupt)); + assert_param(IS_SDMMC_CPSM(Command->CPSM)); + + /* Set the SDMMC Argument value */ + SDMMCx->ARG = Command->Argument; + + /* Set SDMMC command parameters */ + tmpreg |= (uint32_t)(Command->CmdIndex | \ + Command->Response | \ + Command->WaitForInterrupt | \ + Command->CPSM); + + /* Write to SDMMC CMD register */ + MODIFY_REG(SDMMCx->CMD, CMD_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + +/** + * @brief Return the command index of last command for which response received + * @param SDMMCx: Pointer to SDMMC register base + * @retval Command index of the last command response received + */ +uint8_t SDMMC_GetCommandResponse(const SDMMC_TypeDef *SDMMCx) +{ + return (uint8_t)(SDMMCx->RESPCMD); +} + + +/** + * @brief Return the response received from the card for the last command + * @param SDMMCx: Pointer to SDMMC register base + * @param Response: Specifies the SDMMC response register. + * This parameter can be one of the following values: + * @arg SDMMC_RESP1: Response Register 1 + * @arg SDMMC_RESP2: Response Register 2 + * @arg SDMMC_RESP3: Response Register 3 + * @arg SDMMC_RESP4: Response Register 4 + * @retval The Corresponding response register value + */ +uint32_t SDMMC_GetResponse(const SDMMC_TypeDef *SDMMCx, uint32_t Response) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SDMMC_RESP(Response)); + + /* Get the response */ + tmp = (uint32_t)(&(SDMMCx->RESP1)) + Response; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Configure the SDMMC data path according to the specified + * parameters in the SDMMC_DataInitTypeDef. + * @param SDMMCx: Pointer to SDMMC register base + * @param Data : pointer to a SDMMC_DataInitTypeDef structure + * that contains the configuration information for the SDMMC data. + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_ConfigData(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef *Data) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_DATA_LENGTH(Data->DataLength)); + assert_param(IS_SDMMC_BLOCK_SIZE(Data->DataBlockSize)); + assert_param(IS_SDMMC_TRANSFER_DIR(Data->TransferDir)); + assert_param(IS_SDMMC_TRANSFER_MODE(Data->TransferMode)); + assert_param(IS_SDMMC_DPSM(Data->DPSM)); + + /* Set the SDMMC Data TimeOut value */ + SDMMCx->DTIMER = Data->DataTimeOut; + + /* Set the SDMMC DataLength value */ + SDMMCx->DLEN = Data->DataLength; + + /* Set the SDMMC data configuration parameters */ + tmpreg |= (uint32_t)(Data->DataBlockSize | \ + Data->TransferDir | \ + Data->TransferMode | \ + Data->DPSM); + + /* Write to SDMMC DCTRL */ + MODIFY_REG(SDMMCx->DCTRL, DCTRL_CLEAR_MASK, tmpreg); + + return HAL_OK; + +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param SDMMCx: Pointer to SDMMC register base + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDMMC_GetDataCounter(const SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->DCOUNT); +} + +/** + * @brief Get the FIFO data + * @param SDMMCx: Pointer to SDMMC register base + * @retval Data received + */ +uint32_t SDMMC_GetFIFOCount(const SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->FIFO); +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDMMCx: Pointer to SDMMC register base + * @param SDMMC_ReadWaitMode: SDMMC Read Wait operation mode. + * This parameter can be: + * @arg SDMMC_READ_WAIT_MODE_CLK: Read Wait control by stopping SDMMCCLK + * @arg SDMMC_READ_WAIT_MODE_DATA2: Read Wait control using SDMMC_DATA2 + * @retval None + */ +HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDMMC_READWAIT_MODE(SDMMC_ReadWaitMode)); + + /* Set SDMMC read wait mode */ + MODIFY_REG(SDMMCx->DCTRL, SDMMC_DCTRL_RWMOD, SDMMC_ReadWaitMode); + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group4 Command management functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Commands management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed commands. + +@endverbatim + * @{ + */ + +/** + * @brief Send the Data Block Length command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdBlockLength(SDMMC_TypeDef *SDMMCx, uint32_t BlockSize) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)BlockSize; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_BLOCKLEN; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SET_BLOCKLEN, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Data Block number command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdBlockCount(SDMMC_TypeDef *SDMMCx, uint32_t BlockCount) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)BlockCount; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_BLOCK_COUNT; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SET_BLOCK_COUNT, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Single Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_READ_SINGLE_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Multi Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_MULT_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_READ_MULT_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Single Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_WRITE_SINGLE_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Multi Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_MULT_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_WRITE_MULT_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command for SD and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_ERASE_GRP_START, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command for SD and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_ERASE_GRP_END, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE_GRP_START, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE_GRP_END, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Erase command and check the response + * @param SDMMCx Pointer to SDMMC register base + * @param EraseType Type of erase to be performed + * @retval HAL status + */ +uint32_t SDMMC_CmdErase(SDMMC_TypeDef *SDMMCx, uint32_t EraseType) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = EraseType; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE, SDMMC_MAXERASETIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Stop Transfer command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStopTransfer(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD12 STOP_TRANSMISSION */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_STOP_TRANSMISSION; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + + __SDMMC_CMDSTOP_ENABLE(SDMMCx); + __SDMMC_CMDTRANS_DISABLE(SDMMCx); + + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_STOP_TRANSMISSION, SDMMC_STOPTRANSFERTIMEOUT); + + __SDMMC_CMDSTOP_DISABLE(SDMMCx); + + /* Ignore Address Out Of Range Error, Not relevant at end of memory */ + if (errorstate == SDMMC_ERROR_ADDR_OUT_OF_RANGE) + { + errorstate = SDMMC_ERROR_NONE; + } + + return errorstate; +} + +/** + * @brief Send the Select Deselect command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param addr: Address of the card to be selected + * @retval HAL status + */ +uint32_t SDMMC_CmdSelDesel(SDMMC_TypeDef *SDMMCx, uint32_t Addr) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD7 SDMMC_SEL_DESEL_CARD */ + sdmmc_cmdinit.Argument = (uint32_t)Addr; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEL_DESEL_CARD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SEL_DESEL_CARD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Go Idle State command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdGoIdleState(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_GO_IDLE_STATE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_NO; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdError(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Operating Condition command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdOperCond(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD8 to verify SD card interface operating condition */ + /* Argument: - [31:12]: Reserved (shall be set to '0') + - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + - [7:0]: Check Pattern (recommended 0xAA) */ + /* CMD Response: R7 */ + sdmmc_cmdinit.Argument = SDMMC_CHECK_PATTERN; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp7(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Application command to verify that that the next command + * is an application specific com-mand rather than a standard command + * and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdAppCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = (uint32_t)Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_CMD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + /* If there is a HAL_ERROR, it is a MMC card, else + it is a SD card: SD card 2.0 (voltage range mismatch) + or SD card 1.x */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_APP_CMD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the command asking the accessed card to send its operating + * condition register (OCR) + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdAppOperCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_OP_COND; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Bus Width command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param BusWidth: BusWidth + * @retval HAL status + */ +uint32_t SDMMC_CmdBusWidth(SDMMC_TypeDef *SDMMCx, uint32_t BusWidth) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = (uint32_t)BusWidth; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_SD_SET_BUSWIDTH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_APP_SD_SET_BUSWIDTH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send SCR command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendSCR(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD51 SD_APP_SEND_SCR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_SEND_SCR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_APP_SEND_SCR, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send CID command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCID(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD2 ALL_SEND_CID */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ALL_SEND_CID; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param pRCA: Card RCA + * @retval HAL status + */ +uint32_t SDMMC_CmdSetRelAdd(SDMMC_TypeDef *SDMMCx, uint16_t *pRCA) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD3 SD_CMD_SET_REL_ADDR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp6(SDMMCx, SDMMC_CMD_SET_REL_ADDR, pRCA); + + return errorstate; +} + +/** + * @brief Send the Set Relative Address command to MMC card (not SD card). + * @param SDMMCx Pointer to SDMMC register base + * @param RCA Card RCA + * @retval HAL status + */ +uint32_t SDMMC_CmdSetRelAddMmc(SDMMC_TypeDef *SDMMCx, uint16_t RCA) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD3 SD_CMD_SET_REL_ADDR */ + sdmmc_cmdinit.Argument = ((uint32_t)RCA << 16U); + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SET_REL_ADDR, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Sleep command to MMC card (not SD card). + * @param SDMMCx Pointer to SDMMC register base + * @param Argument Argument of the command (RCA and Sleep/Awake) + * @retval HAL status + */ +uint32_t SDMMC_CmdSleepMmc(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD5 SDMMC_CMD_MMC_SLEEP_AWAKE */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_MMC_SLEEP_AWAKE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_MMC_SLEEP_AWAKE, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Status command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendStatus(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_STATUS; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SEND_STATUS, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Status register command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStatusRegister(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_STATUS; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_APP_STATUS, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Sends host capacity support information and activates the card's + * initialization process. Send SDMMC_CMD_SEND_OP_COND command + * @param SDMMCx: Pointer to SDMMC register base + * @parame Argument: Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdOpCondition(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_OP_COND; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDMMCx); + + return errorstate; +} + +/** + * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH command + * @param SDMMCx: Pointer to SDMMC register base + * @parame Argument: Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdSwitch(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD6 to activate SDR50 Mode and Power Limit 1.44W */ + /* CMD Response: R1 */ + sdmmc_cmdinit.Argument = Argument; /* SDMMC_SDR25_SWITCH_PATTERN*/ + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SWITCH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_HS_SWITCH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the command asking the accessed card to send its operating + * condition register (OCR) + * @param None + * @retval HAL status + */ +uint32_t SDMMC_CmdVoltageSwitch(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0x00000000; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_VOLTAGE_SWITCH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_VOLTAGE_SWITCH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send EXT_CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendEXTCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_HS_SEND_EXT_CSD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group5 Responses management functions + * @brief Responses functions + * +@verbatim + =============================================================================== + ##### Responses management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed responses. + +@endverbatim + * @{ + */ +/** + * @brief Checks for error conditions for R1 response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp1(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint32_t Timeout) +{ + uint32_t response_r1; + uint32_t sta_reg; + + /* 8 is the number of required instructions cycles for the below loop statement. + The Timeout is expressed in ms */ + uint32_t count = Timeout * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT | + SDMMC_FLAG_BUSYD0END)) == 0U) || ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + /* Check response received is of desired command */ + if (SDMMC_GetCommandResponse(SDMMCx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* We have received response, retrieve it for analysis */ + response_r1 = SDMMC_GetResponse(SDMMCx, SDMMC_RESP1); + + if ((response_r1 & SDMMC_OCR_ERRORBITS) == SDMMC_ALLZERO) + { + return SDMMC_ERROR_NONE; + } + else if ((response_r1 & SDMMC_OCR_ADDR_OUT_OF_RANGE) == SDMMC_OCR_ADDR_OUT_OF_RANGE) + { + return SDMMC_ERROR_ADDR_OUT_OF_RANGE; + } + else if ((response_r1 & SDMMC_OCR_ADDR_MISALIGNED) == SDMMC_OCR_ADDR_MISALIGNED) + { + return SDMMC_ERROR_ADDR_MISALIGNED; + } + else if ((response_r1 & SDMMC_OCR_BLOCK_LEN_ERR) == SDMMC_OCR_BLOCK_LEN_ERR) + { + return SDMMC_ERROR_BLOCK_LEN_ERR; + } + else if ((response_r1 & SDMMC_OCR_ERASE_SEQ_ERR) == SDMMC_OCR_ERASE_SEQ_ERR) + { + return SDMMC_ERROR_ERASE_SEQ_ERR; + } + else if ((response_r1 & SDMMC_OCR_BAD_ERASE_PARAM) == SDMMC_OCR_BAD_ERASE_PARAM) + { + return SDMMC_ERROR_BAD_ERASE_PARAM; + } + else if ((response_r1 & SDMMC_OCR_WRITE_PROT_VIOLATION) == SDMMC_OCR_WRITE_PROT_VIOLATION) + { + return SDMMC_ERROR_WRITE_PROT_VIOLATION; + } + else if ((response_r1 & SDMMC_OCR_LOCK_UNLOCK_FAILED) == SDMMC_OCR_LOCK_UNLOCK_FAILED) + { + return SDMMC_ERROR_LOCK_UNLOCK_FAILED; + } + else if ((response_r1 & SDMMC_OCR_COM_CRC_FAILED) == SDMMC_OCR_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else if ((response_r1 & SDMMC_OCR_ILLEGAL_CMD) == SDMMC_OCR_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if ((response_r1 & SDMMC_OCR_CARD_ECC_FAILED) == SDMMC_OCR_CARD_ECC_FAILED) + { + return SDMMC_ERROR_CARD_ECC_FAILED; + } + else if ((response_r1 & SDMMC_OCR_CC_ERROR) == SDMMC_OCR_CC_ERROR) + { + return SDMMC_ERROR_CC_ERR; + } + else if ((response_r1 & SDMMC_OCR_STREAM_READ_UNDERRUN) == SDMMC_OCR_STREAM_READ_UNDERRUN) + { + return SDMMC_ERROR_STREAM_READ_UNDERRUN; + } + else if ((response_r1 & SDMMC_OCR_STREAM_WRITE_OVERRUN) == SDMMC_OCR_STREAM_WRITE_OVERRUN) + { + return SDMMC_ERROR_STREAM_WRITE_OVERRUN; + } + else if ((response_r1 & SDMMC_OCR_CID_CSD_OVERWRITE) == SDMMC_OCR_CID_CSD_OVERWRITE) + { + return SDMMC_ERROR_CID_CSD_OVERWRITE; + } + else if ((response_r1 & SDMMC_OCR_WP_ERASE_SKIP) == SDMMC_OCR_WP_ERASE_SKIP) + { + return SDMMC_ERROR_WP_ERASE_SKIP; + } + else if ((response_r1 & SDMMC_OCR_CARD_ECC_DISABLED) == SDMMC_OCR_CARD_ECC_DISABLED) + { + return SDMMC_ERROR_CARD_ECC_DISABLED; + } + else if ((response_r1 & SDMMC_OCR_ERASE_RESET) == SDMMC_OCR_ERASE_RESET) + { + return SDMMC_ERROR_ERASE_RESET; + } + else if ((response_r1 & SDMMC_OCR_AKE_SEQ_ERROR) == SDMMC_OCR_AKE_SEQ_ERROR) + { + return SDMMC_ERROR_AKE_SEQ_ERR; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R2 (CID or CSD) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp2(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R3 (OCR) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp3(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else + { + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R6 (RCA) response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @param pRCA: Pointer to the variable that will contain the SD card relative + * address RCA + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp6(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint16_t *pRCA) +{ + uint32_t response_r1; + uint32_t sta_reg; + + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + /* Check response received is of desired command */ + if (SDMMC_GetCommandResponse(SDMMCx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + /* We have received response, retrieve it. */ + response_r1 = SDMMC_GetResponse(SDMMCx, SDMMC_RESP1); + + if ((response_r1 & (SDMMC_R6_GENERAL_UNKNOWN_ERROR | SDMMC_R6_ILLEGAL_CMD | + SDMMC_R6_COM_CRC_FAILED)) == SDMMC_ALLZERO) + { + *pRCA = (uint16_t)(response_r1 >> 16); + + return SDMMC_ERROR_NONE; + } + else if ((response_r1 & SDMMC_R6_ILLEGAL_CMD) == SDMMC_R6_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if ((response_r1 & SDMMC_R6_COM_CRC_FAILED) == SDMMC_R6_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R7 response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp7(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + /* Card is not SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + /* Card is not SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CMDREND)) + { + /* Card is SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CMDREND); + } + + return SDMMC_ERROR_NONE; + +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group6 Linked List functions + * @brief Linked List management functions + * +@verbatim + =============================================================================== + ##### Linked List management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed functions. + +@endverbatim + * @{ + */ + +/** + * @brief Build new Linked List node. + * @param pNode: Pointer to new node to add. + * @param pNodeConf: Pointer to configuration parameters for new node to add. + * @retval Error status + */ +uint32_t SDMMC_DMALinkedList_BuildNode(SDMMC_DMALinkNodeTypeDef *pNode, SDMMC_DMALinkNodeConfTypeDef *pNodeConf) +{ + + if ((pNode == NULL) || (pNodeConf == NULL)) + { + return SDMMC_ERROR_INVALID_PARAMETER; + } + /* Configure the Link Node registers*/ + pNode->IDMABASER = pNodeConf->BufferAddress; + pNode->IDMABSIZE = pNodeConf->BufferSize; + pNode->IDMALAR = SDMMC_IDMALAR_ULS | SDMMC_IDMALAR_ABR; + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Insert new Linked List node. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pPrevNode: Pointer to previous node . + * @param pNewNode: Pointer to new node to add. + * @retval Error status + */ +uint32_t SDMMC_DMALinkedList_InsertNode(SDMMC_DMALinkedListTypeDef *pLinkedList, SDMMC_DMALinkNodeTypeDef *pPrevNode, + SDMMC_DMALinkNodeTypeDef *pNode) +{ + uint32_t link_list_offset; + uint32_t node_address = (uint32_t) pNode; + + /* First Node */ + if (pLinkedList->NodesCounter == 0U) + { + + pLinkedList->pHeadNode = pNode; + pLinkedList->pTailNode = pNode; + pLinkedList->NodesCounter = 1U; + + } + else if (pPrevNode == pLinkedList->pTailNode) + { + if (pNode <= pLinkedList->pHeadNode) + { + /* Node Address should greater than Head Node Address*/ + return SDMMC_ERROR_INVALID_PARAMETER; + } + + /*Last Node, no next node */ + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_ULA, 0U); + + /*link Prev node with new one */ + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_ULA, SDMMC_IDMALAR_ULA); + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_IDMALA, (node_address - (uint32_t)pLinkedList->pHeadNode)); + + pLinkedList->NodesCounter ++; + pLinkedList->pTailNode = pNode; + + } + else + { + + if (pNode <= pLinkedList->pHeadNode) + { + /* Node Address should greater than Head Node Address*/ + return SDMMC_ERROR_INVALID_PARAMETER; + } + + /*link New node with Next one */ + link_list_offset = pNode->IDMALAR; + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_IDMALA, link_list_offset); + + /*link Prev node with new one */ + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_ULA, SDMMC_IDMALAR_ULA); + MODIFY_REG(pPrevNode->IDMALAR, SDMMC_IDMALAR_IDMALA, (node_address - (uint32_t)pLinkedList->pHeadNode)); + + pLinkedList->NodesCounter ++; + + } + return SDMMC_ERROR_NONE; +} + +/** + * @brief Remove node from the Linked List. + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @param pNode: Pointer to new node to add. + * @retval Error status + */ +uint32_t SDMMC_DMALinkedList_RemoveNode(SDMMC_DMALinkedListTypeDef *pLinkedList, SDMMC_DMALinkNodeTypeDef *pNode) +{ + uint32_t count = 0U; + uint32_t linked_list_offset; + SDMMC_DMALinkNodeTypeDef *prev_node = NULL; + SDMMC_DMALinkNodeTypeDef *curr_node ; + + /* First Node */ + if (pLinkedList->NodesCounter == 0U) + { + + return SDMMC_ERROR_INVALID_PARAMETER; + } + else + { + curr_node = pLinkedList->pHeadNode; + while ((curr_node != pNode) && (count <= pLinkedList->NodesCounter)) + { + prev_node = curr_node; + curr_node = (SDMMC_DMALinkNodeTypeDef *)((prev_node->IDMALAR & SDMMC_IDMALAR_IDMALA) + + (uint32_t)pLinkedList->pHeadNode); + count++; + } + + if ((count == 0U) || (count > pLinkedList->NodesCounter)) + { + /* Node not found in the linked list */ + return SDMMC_ERROR_INVALID_PARAMETER; + } + + pLinkedList->NodesCounter--; + + if (pLinkedList->NodesCounter == 0U) + { + pLinkedList->pHeadNode = 0U; + pLinkedList->pTailNode = 0U; + } + else + { + /*link prev node with next one */ + linked_list_offset = curr_node->IDMALAR; + MODIFY_REG(prev_node->IDMALAR, SDMMC_IDMALAR_IDMALA, linked_list_offset); + /* Configure the new Link Node registers*/ + pNode->IDMALAR |= linked_list_offset; + + pLinkedList->pTailNode = prev_node; + } + } + return SDMMC_ERROR_NONE; +} + +/** + * @brief Lock Linked List Node + * @param pNode: Pointer to node to lock. + * @retval Error status + + */ +uint32_t SDMMC_DMALinkedList_LockNode(SDMMC_DMALinkNodeTypeDef *pNode) +{ + + if (pNode == NULL) + { + return SDMMC_ERROR_INVALID_PARAMETER; + } + + MODIFY_REG(pNode->IDMALAR, SDMMC_IDMALAR_ABR, 0U); + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Unlock Linked List Node + * @param pNode: Pointer to node to unlock. + * @retval Error status + + */ +uint32_t SDMMC_DMALinkedList_UnlockNode(SDMMC_DMALinkNodeTypeDef *pNode) +{ + + if (pNode == NULL) + { + return SDMMC_ERROR_INVALID_PARAMETER; + } + + MODIFY_REG(pNode->IDMALAR, SDMMC_IDMALAR_ABR, SDMMC_IDMALAR_ABR); + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Enable Linked List circular mode + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval Error status + + */ +uint32_t SDMMC_DMALinkedList_EnableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList) +{ + + if (pLinkedList == NULL) + { + return SDMMC_ERROR_INVALID_PARAMETER; + } + + MODIFY_REG(pLinkedList->pTailNode->IDMALAR, SDMMC_IDMALAR_ULA | SDMMC_IDMALAR_IDMALA, SDMMC_IDMALAR_ULA); + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Disable DMA Linked List Circular mode + * @param pLinkedList: Pointer to the linkedlist that contains transfer nodes + * @retval Error status + */ +uint32_t SDMMC_DMALinkedList_DisableCircularMode(SDMMC_DMALinkedListTypeDef *pLinkedList) +{ + + if (pLinkedList == NULL) + { + return SDMMC_ERROR_INVALID_PARAMETER; + } + + MODIFY_REG(pLinkedList->pTailNode->IDMALAR, SDMMC_IDMALAR_ULA, 0U); + + return SDMMC_ERROR_NONE; +} + +/** + * @} + */ + + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief Checks for error conditions for CMD0. + * @param hsd: SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdError(SDMMC_TypeDef *SDMMCx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + } while (!__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CMDSENT)); + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + return SDMMC_ERROR_NONE; +} + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED || HAL_MMC_MODULE_ENABLED */ +#endif /* SDMMC1 || SDMMC2 */ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_spi.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_spi.c new file mode 100644 index 000000000..954ec8a40 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_spi.c @@ -0,0 +1,751 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_spi.c + * @author MCD Application Team + * @brief SPI LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_spi.h" +#include "stm32h7rsxx_ll_bus.h" +#include "stm32h7rsxx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) + +/** @addtogroup SPI_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup SPI_LL_Private_Macros + * @{ + */ + +#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) || \ + ((__VALUE__) == LL_SPI_MODE_SLAVE)) + +#define IS_LL_SPI_SS_IDLENESS(__VALUE__) (((__VALUE__) == LL_SPI_SS_IDLENESS_00CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_01CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_02CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_03CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_04CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_05CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_06CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_07CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_08CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_09CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_10CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_11CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_12CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_13CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_14CYCLE) || \ + ((__VALUE__) == LL_SPI_SS_IDLENESS_15CYCLE)) + +#define IS_LL_SPI_ID_IDLENESS(__VALUE__) (((__VALUE__) == LL_SPI_ID_IDLENESS_00CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_01CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_02CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_03CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_04CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_05CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_06CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_07CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_08CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_09CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_10CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_11CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_12CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_13CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_14CYCLE) || \ + ((__VALUE__) == LL_SPI_ID_IDLENESS_15CYCLE)) + +#define IS_LL_SPI_TXCRCINIT_PATTERN(__VALUE__) (((__VALUE__) == LL_SPI_TXCRCINIT_ALL_ZERO_PATTERN) || \ + ((__VALUE__) == LL_SPI_TXCRCINIT_ALL_ONES_PATTERN)) + +#define IS_LL_SPI_RXCRCINIT_PATTERN(__VALUE__) (((__VALUE__) == LL_SPI_RXCRCINIT_ALL_ZERO_PATTERN) || \ + ((__VALUE__) == LL_SPI_RXCRCINIT_ALL_ONES_PATTERN)) + +#define IS_LL_SPI_UDR_CONFIG_REGISTER(__VALUE__) (((__VALUE__) == LL_SPI_UDR_CONFIG_REGISTER_PATTERN) || \ + ((__VALUE__) == LL_SPI_UDR_CONFIG_LAST_RECEIVED) || \ + ((__VALUE__) == LL_SPI_UDR_CONFIG_LAST_TRANSMITTED)) + +#define IS_LL_SPI_UDR_DETECT_BEGIN_DATA(__VALUE__) (((__VALUE__) == LL_SPI_UDR_DETECT_BEGIN_DATA_FRAME) || \ + ((__VALUE__) == LL_SPI_UDR_DETECT_END_DATA_FRAME) || \ + ((__VALUE__) == LL_SPI_UDR_DETECT_BEGIN_ACTIVE_NSS)) + +#define IS_LL_SPI_PROTOCOL(__VALUE__) (((__VALUE__) == LL_SPI_PROTOCOL_MOTOROLA) || \ + ((__VALUE__) == LL_SPI_PROTOCOL_TI)) + +#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) || \ + ((__VALUE__) == LL_SPI_PHASE_2EDGE)) + +#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) || \ + ((__VALUE__) == LL_SPI_POLARITY_HIGH)) + +#define IS_LL_SPI_BAUDRATEPRESCALER(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_BYPASS) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) || \ + ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) + +#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) || \ + ((__VALUE__) == LL_SPI_MSB_FIRST)) + +#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) || \ + ((__VALUE__) == LL_SPI_SIMPLEX_TX) || \ + ((__VALUE__) == LL_SPI_SIMPLEX_RX) || \ + ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) || \ + ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) + +#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_17BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_18BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_19BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_20BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_21BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_22BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_23BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_24BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_25BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_26BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_27BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_28BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_29BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_30BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_31BIT) || \ + ((__VALUE__) == LL_SPI_DATAWIDTH_32BIT)) + +#define IS_LL_SPI_FIFO_TH(__VALUE__) (((__VALUE__) == LL_SPI_FIFO_TH_01DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_02DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_03DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_04DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_05DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_06DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_07DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_08DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_09DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_10DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_11DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_12DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_13DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_14DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_15DATA) || \ + ((__VALUE__) == LL_SPI_FIFO_TH_16DATA)) + +#define IS_LL_SPI_CRC(__VALUE__) (((__VALUE__) == LL_SPI_CRC_4BIT) || \ + ((__VALUE__) == LL_SPI_CRC_5BIT) || \ + ((__VALUE__) == LL_SPI_CRC_6BIT) || \ + ((__VALUE__) == LL_SPI_CRC_7BIT) || \ + ((__VALUE__) == LL_SPI_CRC_8BIT) || \ + ((__VALUE__) == LL_SPI_CRC_9BIT) || \ + ((__VALUE__) == LL_SPI_CRC_10BIT) || \ + ((__VALUE__) == LL_SPI_CRC_11BIT) || \ + ((__VALUE__) == LL_SPI_CRC_12BIT) || \ + ((__VALUE__) == LL_SPI_CRC_13BIT) || \ + ((__VALUE__) == LL_SPI_CRC_14BIT) || \ + ((__VALUE__) == LL_SPI_CRC_15BIT) || \ + ((__VALUE__) == LL_SPI_CRC_16BIT) || \ + ((__VALUE__) == LL_SPI_CRC_17BIT) || \ + ((__VALUE__) == LL_SPI_CRC_18BIT) || \ + ((__VALUE__) == LL_SPI_CRC_19BIT) || \ + ((__VALUE__) == LL_SPI_CRC_20BIT) || \ + ((__VALUE__) == LL_SPI_CRC_21BIT) || \ + ((__VALUE__) == LL_SPI_CRC_22BIT) || \ + ((__VALUE__) == LL_SPI_CRC_23BIT) || \ + ((__VALUE__) == LL_SPI_CRC_24BIT) || \ + ((__VALUE__) == LL_SPI_CRC_25BIT) || \ + ((__VALUE__) == LL_SPI_CRC_26BIT) || \ + ((__VALUE__) == LL_SPI_CRC_27BIT) || \ + ((__VALUE__) == LL_SPI_CRC_28BIT) || \ + ((__VALUE__) == LL_SPI_CRC_29BIT) || \ + ((__VALUE__) == LL_SPI_CRC_30BIT) || \ + ((__VALUE__) == LL_SPI_CRC_31BIT) || \ + ((__VALUE__) == LL_SPI_CRC_32BIT)) + +#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) || \ + ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) || \ + ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) + +#define IS_LL_SPI_RX_FIFO(__VALUE__) (((__VALUE__) == LL_SPI_RX_FIFO_0PACKET) || \ + ((__VALUE__) == LL_SPI_RX_FIFO_1PACKET) || \ + ((__VALUE__) == LL_SPI_RX_FIFO_2PACKET) || \ + ((__VALUE__) == LL_SPI_RX_FIFO_3PACKET)) + +#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) || \ + ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) + +#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1UL) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_SPI_DeInit(const SPI_TypeDef *SPIx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + +#if defined(SPI1) + if (SPIx == SPI1) + { + /* Force reset of SPI clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1); + + /* Release reset of SPI clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI1 */ +#if defined(SPI2) + if (SPIx == SPI2) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI2 */ +#if defined(SPI3) + if (SPIx == SPI3) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI3 */ +#if defined(SPI4) + if (SPIx == SPI4) + { + /* Force reset of SPI clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI4); + + /* Release reset of SPI clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI4); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI4 */ +#if defined(SPI5) + if (SPIx == SPI5) + { + /* Force reset of SPI clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI5); + + /* Release reset of SPI clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI5); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI5 */ +#if defined(SPI6) + if (SPIx == SPI6) + { + /* Force reset of SPI clock */ + LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_SPI6); + + /* Release reset of SPI clock */ + LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_SPI6); + + /* Update the return status */ + status = SUCCESS; + } +#endif /* SPI6 */ + + return status; +} + +/** + * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled + * (SPI_CR1_SPE bit =0), SPI IP should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t tmp_nss; + uint32_t tmp_mode; + uint32_t tmp_nss_polarity; + + /* Check the SPI Instance SPIx*/ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + + /* Check the SPI parameters from SPI_InitStruct*/ + assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); + assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); + assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); + assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); + assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); + assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); + assert_param(IS_LL_SPI_BAUDRATEPRESCALER(SPI_InitStruct->BaudRate)); + assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); + assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); + + /* Check the SPI instance is not enabled */ + if (LL_SPI_IsEnabled(SPIx) == 0x00000000UL) + { + /*---------------------------- SPIx CFG1 Configuration ------------------------ + * Configure SPIx CFG1 with parameters: + * - Master Baud Rate : SPI_CFG1_MBR[2:0] bits & SPI_CFG1_BPASS bit + * - CRC Computation Enable : SPI_CFG1_CRCEN bit + * - Length of data frame : SPI_CFG1_DSIZE[4:0] bits + */ + MODIFY_REG(SPIx->CFG1, SPI_CFG1_BPASS | SPI_CFG1_MBR | SPI_CFG1_CRCEN | SPI_CFG1_DSIZE, + SPI_InitStruct->BaudRate | SPI_InitStruct->CRCCalculation | SPI_InitStruct->DataWidth); + + tmp_nss = SPI_InitStruct->NSS; + tmp_mode = SPI_InitStruct->Mode; + tmp_nss_polarity = LL_SPI_GetNSSPolarity(SPIx); + + /* Checks to setup Internal SS signal level and avoid a MODF Error */ + if ((tmp_nss == LL_SPI_NSS_SOFT) && (((tmp_nss_polarity == LL_SPI_NSS_POLARITY_LOW) && \ + (tmp_mode == LL_SPI_MODE_MASTER)) || \ + ((tmp_nss_polarity == LL_SPI_NSS_POLARITY_HIGH) && \ + (tmp_mode == LL_SPI_MODE_SLAVE)))) + { + LL_SPI_SetInternalSSLevel(SPIx, LL_SPI_SS_LEVEL_HIGH); + } + + /*---------------------------- SPIx CFG2 Configuration ------------------------ + * Configure SPIx CFG2 with parameters: + * - NSS management : SPI_CFG2_SSM, SPI_CFG2_SSOE bits + * - ClockPolarity : SPI_CFG2_CPOL bit + * - ClockPhase : SPI_CFG2_CPHA bit + * - BitOrder : SPI_CFG2_LSBFRST bit + * - Master/Slave Mode : SPI_CFG2_MASTER bit + * - SPI Mode : SPI_CFG2_COMM[1:0] bits + */ + MODIFY_REG(SPIx->CFG2, SPI_CFG2_SSM | SPI_CFG2_SSOE | + SPI_CFG2_CPOL | SPI_CFG2_CPHA | + SPI_CFG2_LSBFRST | SPI_CFG2_MASTER | SPI_CFG2_COMM, + SPI_InitStruct->NSS | SPI_InitStruct->ClockPolarity | + SPI_InitStruct->ClockPhase | SPI_InitStruct->BitOrder | + SPI_InitStruct->Mode | (SPI_InitStruct->TransferDirection & SPI_CFG2_COMM)); + + /*---------------------------- SPIx CR1 Configuration ------------------------ + * Configure SPIx CR1 with parameter: + * - Half Duplex Direction : SPI_CR1_HDDIR bit + */ + MODIFY_REG(SPIx->CR1, SPI_CR1_HDDIR, SPI_InitStruct->TransferDirection & SPI_CR1_HDDIR); + + /*---------------------------- SPIx CRCPOLY Configuration ---------------------- + * Configure SPIx CRCPOLY with parameter: + * - CRCPoly : CRCPOLY[31:0] bits + */ + if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); + LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); + } + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); + + status = SUCCESS; + } + + return status; +} + +/** + * @brief Set each @ref LL_SPI_InitTypeDef field to default value. + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) +{ + /* Set SPI_InitStruct fields to default values */ + SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; + SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; + SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; + SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; + SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; + SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; + SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; + SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; + SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; + SPI_InitStruct->CRCPoly = 7UL; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/** @addtogroup I2S_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Constants I2S Private Constants + * @{ + */ +/* I2S registers Masks */ +#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_DATFMT | SPI_I2SCFGR_CKPOL | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_MCKOE | \ + SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Macros I2S Private Macros + * @{ + */ + +#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) || \ + ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__VALUE__) == LL_I2S_DATAFORMAT_24B) || \ + ((__VALUE__) == LL_I2S_DATAFORMAT_24B_LEFT_ALIGNED) || \ + ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) + +#define IS_LL_I2S_CHANNEL_LENGTH_TYPE (__VALUE__) (((__VALUE__) == LL_I2S_SLAVE_VARIABLE_CH_LENGTH) || \ + ((__VALUE__) == LL_I2S_SLAVE_FIXED_CH_LENGTH)) + +#define IS_LL_I2S_CKPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) || \ + ((__VALUE__) == LL_I2S_POLARITY_HIGH)) + +#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) || \ + ((__VALUE__) == LL_I2S_STANDARD_MSB) || \ + ((__VALUE__) == LL_I2S_STANDARD_LSB) || \ + ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) || \ + ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) + +#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) || \ + ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) || \ + ((__VALUE__) == LL_I2S_MODE_SLAVE_FULL_DUPLEX) || \ + ((__VALUE__) == LL_I2S_MODE_MASTER_TX) || \ + ((__VALUE__) == LL_I2S_MODE_MASTER_RX) || \ + ((__VALUE__) == LL_I2S_MODE_MASTER_FULL_DUPLEX)) + +#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) || \ + ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) + +#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) && \ + ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) || \ + ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) + +#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) <= 0xFFUL) + +#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) || \ + ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) + +#define IS_LL_I2S_FIFO_TH (__VALUE__) (((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_01DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_02DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_03DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_04DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_05DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_06DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_07DATA) || \ + ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_08DATA)) + +#define IS_LL_I2S_BIT_ORDER(__VALUE__) (((__VALUE__) == LL_I2S_LSB_FIRST) || \ + ((__VALUE__) == LL_I2S_MSB_FIRST)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI/I2S registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_I2S_DeInit(const SPI_TypeDef *SPIx) +{ + return LL_SPI_DeInit(SPIx); +} + +/** + * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. + * @note As some bits in I2S configuration registers can only be written when the SPI is disabled + * (SPI_CR1_SPE bit =0), SPI IP should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @note I2S (SPI) source clock must be ready before calling this function. Otherwise will results + * in wrong programming. + * @param SPIx SPI Instance + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are Initialized + * - ERROR: SPI registers are not Initialized + */ +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) +{ + uint32_t i2sdiv = 0UL; + uint32_t i2sodd = 0UL; + uint32_t packetlength = 1UL; + uint32_t ispcm = 0UL; + uint32_t tmp; + uint32_t sourceclock; + + ErrorStatus status = ERROR; + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); + assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); + assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); + assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); + assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); + assert_param(IS_LL_I2S_CKPOL(I2S_InitStruct->ClockPolarity)); + + /* Check that SPE bit is set to 0 in order to be sure that SPI/I2S block is disabled. + * In this case, it is useless to check if the I2SMOD bit is set to 0 because + * this bit I2SMOD only serves to select the desired mode. + */ + if (LL_SPI_IsEnabled(SPIx) == 0x00000000UL) + { + /*---------------------------- SPIx I2SCFGR Configuration -------------------- + * Configure SPIx I2SCFGR with parameters: + * - Mode : SPI_I2SCFGR_I2SCFG[2:0] bits + * - Standard : SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits + * - DataFormat : SPI_I2SCFGR_CHLEN, SPI_I2SCFGR_DATFMT and SPI_I2SCFGR_DATLEN[1:0] bits + * - ClockPolarity : SPI_I2SCFGR_CKPOL bit + * - MCLKOutput : SPI_I2SPR_MCKOE bit + * - I2S mode : SPI_I2SCFGR_I2SMOD bit + */ + + /* Write to SPIx I2SCFGR */ + MODIFY_REG(SPIx->I2SCFGR, + I2S_I2SCFGR_CLEAR_MASK, + I2S_InitStruct->Mode | I2S_InitStruct->Standard | + I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | + I2S_InitStruct->MCLKOutput | SPI_I2SCFGR_I2SMOD); + + /*---------------------------- SPIx I2SCFGR Configuration ---------------------- + * Configure SPIx I2SCFGR with parameters: + * - AudioFreq : SPI_I2SCFGR_I2SDIV[7:0] and SPI_I2SCFGR_ODD bits + */ + + /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) + * else, default values are used: i2sodd = 0U, i2sdiv = 0U. + */ + if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) + * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). + */ + if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) + { + /* Packet length is 32 bits */ + packetlength = 2UL; + } + + /* Check if PCM standard is used */ + if ((I2S_InitStruct->Standard == LL_I2S_STANDARD_PCM_SHORT) || + (I2S_InitStruct->Standard == LL_I2S_STANDARD_PCM_LONG)) + { + ispcm = 1UL; + } + + /* Get the I2S (SPI) source clock value */ + if (SPIx == SPI1) + { + sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI1_CLKSOURCE); + } + else if ((SPIx == SPI2) || (SPIx == SPI3)) + { + sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI23_CLKSOURCE); + } + else /* SPI6 */ + { + sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI6_CLKSOURCE); + } + + /* Compute the Real divider depending on the MCLK output state with a fixed point */ + if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (((sourceclock / (256UL >> ispcm)) * 16UL) / I2S_InitStruct->AudioFreq) + 8UL; + } + else + { + /* MCLK output is disabled */ + tmp = (((sourceclock / ((32UL >> ispcm) * packetlength)) * 16UL) / I2S_InitStruct->AudioFreq) + 8UL; + } + + /* Remove the fixed point */ + tmp = tmp / 16UL; + + /* Check the parity of the divider */ + i2sodd = tmp & 0x1UL; + + /* Compute the i2sdiv prescaler */ + i2sdiv = tmp / 2UL; + } + + /* Test if the obtain values are forbidden or out of range */ + if (((i2sodd == 1UL) && (i2sdiv == 1UL)) || (i2sdiv > 0xFFUL)) + { + /* Set the default values */ + i2sdiv = 0UL; + i2sodd = 0UL; + } + + /* Write to SPIx I2SCFGR register the computed value */ + MODIFY_REG(SPIx->I2SCFGR, + SPI_I2SCFGR_ODD | SPI_I2SCFGR_I2SDIV, + (i2sodd << SPI_I2SCFGR_ODD_Pos) | (i2sdiv << SPI_I2SCFGR_I2SDIV_Pos)); + + status = SUCCESS; + } + + return status; +} + +/** + * @brief Set each @ref LL_I2S_InitTypeDef field to default value. + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) +{ + /*--------------- Reset I2S init structure parameters values -----------------*/ + I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; + I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; + I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; + I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; + I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; + I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; +} + +/** + * @brief Set linear and parity prescaler. + * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n + * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x00 and Max_Data=0xFF + * @note PrescalerLinear '1' is not authorized with parity LL_I2S_PRESCALER_PARITY_ODD + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) +{ + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); + assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); + + /* Write to SPIx I2SPR */ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SDIV | SPI_I2SCFGR_ODD, (PrescalerLinear << SPI_I2SCFGR_I2SDIV_Pos) | + (PrescalerParity << SPI_I2SCFGR_ODD_Pos)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_tim.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_tim.c new file mode 100644 index 000000000..e543cd01e --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_tim.c @@ -0,0 +1,1388 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_tim.c + * @author MCD Application Team + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_tim.h" +#include "stm32h7rsxx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM9) || defined (TIM12) || defined (TIM13) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASYMMETRIC_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASYMMETRIC_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_PULSE_ON_COMPARE) \ + || ((__VALUE__) == LL_TIM_OCMODE_DIRECTION_OUTPUT)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ + || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_CLOCKPLUSDIRECTION_X1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_DIRECTIONALCLOCK_X2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_DIRECTIONALCLOCK_X1_TI12) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X1_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X1_TI2)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) + +#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) + +#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) + +#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) + +#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_BREAK2_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK2_ENABLE)) + +#define IS_LL_TIM_BREAK2_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK2_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK2_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK2_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ + || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM1) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); + } + else if (TIMx == TIM2) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); + } + else if (TIMx == TIM3) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); + } + else if (TIMx == TIM4) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); + } + else if (TIMx == TIM5) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); + } + else if (TIMx == TIM6) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); + } + else if (TIMx == TIM7) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); + } + else if (TIMx == TIM9) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM9); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM9); + } + else if (TIMx == TIM12) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM12); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM12); + } + else if (TIMx == TIM13) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM13); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM13); + } + else if (TIMx == TIM14) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM14); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM14); + } + else if (TIMx == TIM15) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM15); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM15); + } + else if (TIMx == TIM16) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16); + } + else if (TIMx == TIM17) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17); + } + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = 0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + TIM_InitStruct->RepetitionCounter = 0x00000000U; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure + * (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); + } + + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure + * (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = 0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; + TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH5: + result = OC5Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH6: + result = OC6Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration + * data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data + * structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface + * configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface + * configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx Hall sensor interface configuration data + * structure to their default values. + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface + * configuration data structure) + * @retval None + */ +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + /* Set the default configuration */ + TIM_HallSensorInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_HallSensorInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_HallSensorInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_HallSensorInitStruct->CommutationDelay = 0U; +} + +/** + * @brief Configure the Hall sensor interface of the timer instance. + * @note TIMx CH1, CH2 and CH3 inputs connected through a XOR + * to the TI1 input channel + * @note TIMx slave mode controller is configured in reset mode. + Selected internal trigger is TI1F_ED. + * @note Channel 1 is configured as input, IC1 is mapped on TRC. + * @note Captured value stored in TIMx_CCR1 correspond to the time elapsed + * between 2 changes on the inputs. It gives information about motor speed. + * @note Channel 2 is configured in output PWM 2 mode. + * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. + * @note OC2REF is selected as trigger output on TRGO. + * @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used + * when TIMx operates in Hall sensor interface mode. + * @param TIMx Timer Instance + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor + * interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + uint32_t tmpcr2; + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_HallSensorInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ICPSC(TIM_HallSensorInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_HallSensorInitStruct->IC1Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx SMCR register value */ + tmpsmcr = LL_TIM_ReadReg(TIMx, SMCR); + + /* Connect TIMx_CH1, CH2 and CH3 pins to the TI1 input */ + tmpcr2 |= TIM_CR2_TI1S; + + /* OC2REF signal is used as trigger output (TRGO) */ + tmpcr2 |= LL_TIM_TRGO_OC2REF; + + /* Configure the slave mode controller */ + tmpsmcr &= (uint32_t)~(TIM_SMCR_TS | TIM_SMCR_SMS); + tmpsmcr |= LL_TIM_TS_TI1F_ED; + tmpsmcr |= LL_TIM_SLAVEMODE_RESET; + + /* Configure input channel 1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(LL_TIM_ACTIVEINPUT_TRC >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Prescaler >> 16U); + + /* Configure input channel 2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_OC2M | TIM_CCMR1_OC2FE | TIM_CCMR1_OC2PE | TIM_CCMR1_OC2CE); + tmpccmr1 |= (uint32_t)(LL_TIM_OCMODE_PWM2 << 8U); + + /* Set Channel 1 polarity and enable Channel 1 and Channel2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_HallSensorInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx SMCR */ + LL_TIM_WriteReg(TIMx, SMCR, tmpsmcr); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + /* Write to TIMx CCR2 */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_HallSensorInitStruct->CommutationDelay); + + return SUCCESS; +} + +/** + * @brief Set the fields of the Break and Dead Time configuration data structure + * to their default values. + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval None + */ +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; + TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; + TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; + TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00; + TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; + TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; + TIM_BDTRInitStruct->BreakFilter = LL_TIM_BREAK_FILTER_FDIV1; + TIM_BDTRInitStruct->BreakAFMode = LL_TIM_BREAK_AFMODE_INPUT; + TIM_BDTRInitStruct->Break2State = LL_TIM_BREAK2_DISABLE; + TIM_BDTRInitStruct->Break2Polarity = LL_TIM_BREAK2_POLARITY_LOW; + TIM_BDTRInitStruct->Break2Filter = LL_TIM_BREAK2_FILTER_FDIV1; + TIM_BDTRInitStruct->Break2AFMode = LL_TIM_BREAK2_AFMODE_INPUT; + TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; +} + +/** + * @brief Configure the Break and Dead Time feature of the timer instance. + * @note As the bits BK2P, BK2E, BK2F[3:0], BKF[3:0], AOE, BKP, BKE, OSSI, OSSR + * and DTG[7:0] can be write-locked depending on the LOCK configuration, it + * can be necessary to configure all of them during the first write access to + * the TIMx_BDTR register. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @param TIMx Timer Instance + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Break and Dead Time is initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + uint32_t tmpbdtr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); + assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); + assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); + assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); + assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); + assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); + assert_param(IS_LL_TIM_BREAK_FILTER(TIM_BDTRInitStruct->BreakFilter)); + assert_param(IS_LL_TIM_BREAK_AFMODE(TIM_BDTRInitStruct->BreakAFMode)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, TIM_BDTRInitStruct->BreakFilter); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, TIM_BDTRInitStruct->BreakAFMode); + + if (IS_TIM_BKIN2_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_BREAK2_STATE(TIM_BDTRInitStruct->Break2State)); + assert_param(IS_LL_TIM_BREAK2_POLARITY(TIM_BDTRInitStruct->Break2Polarity)); + assert_param(IS_LL_TIM_BREAK2_FILTER(TIM_BDTRInitStruct->Break2Filter)); + assert_param(IS_LL_TIM_BREAK2_AFMODE(TIM_BDTRInitStruct->Break2AFMode)); + + /* Set the BREAK2 input related BDTR bit-fields */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (TIM_BDTRInitStruct->Break2Filter)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, TIM_BDTRInitStruct->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, TIM_BDTRInitStruct->Break2Polarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, TIM_BDTRInitStruct->Break2AFMode); + } + + /* Set TIMx_BDTR */ + LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); + + return SUCCESS; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NP, TIM_OCInitStruct->OCNPolarity << 6U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NE, TIM_OCInitStruct->OCNState << 6U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2, TIM_OCInitStruct->OCIdleState << 2U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2N, TIM_OCInitStruct->OCNIdleState << 3U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NP, TIM_OCInitStruct->OCNPolarity << 10U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NE, TIM_OCInitStruct->OCNState << 10U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3, TIM_OCInitStruct->OCIdleState << 4U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3N, TIM_OCInitStruct->OCNIdleState << 5U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4NP, TIM_OCInitStruct->OCNPolarity << 14U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4NE, TIM_OCInitStruct->OCNState << 14U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS4, TIM_OCInitStruct->OCIdleState << 6U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS4N, TIM_OCInitStruct->OCNIdleState << 7U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 5. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 5 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC5E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC5E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC5M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC5P, TIM_OCInitStruct->OCPolarity << 16U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC5E, TIM_OCInitStruct->OCState << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS5, TIM_OCInitStruct->OCIdleState << 8U); + + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH5(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 6. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 6 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC6E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC6E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC6M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC6P, TIM_OCInitStruct->OCPolarity << 20U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC6E, TIM_OCInitStruct->OCState << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS6, TIM_OCInitStruct->OCIdleState << 10U); + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH6(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC4E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC4P | TIM_CCER_CC4NP), + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM9 || TIM12 || TIM13 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_ucpd.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_ucpd.c new file mode 100644 index 000000000..00185e672 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_ucpd.c @@ -0,0 +1,169 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_ucpd.c + * @author MCD Application Team + * @brief UCPD LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_ucpd.h" +#include "stm32h7rsxx_ll_bus.h" +#include "stm32h7rsxx_ll_rcc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ +#if defined (UCPD1) +/** @addtogroup UCPD_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UCPD_LL_Private_Constants UCPD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UCPD_LL_Private_Macros UCPD Private Macros + * @{ + */ + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UCPD_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UCPD_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the UCPD registers to their default reset values. + * @param UCPDx ucpd Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ucpd registers are de-initialized + * - ERROR: ucpd registers are not de-initialized + */ +ErrorStatus LL_UCPD_DeInit(UCPD_TypeDef *UCPDx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_UCPD_ALL_INSTANCE(UCPDx)); + + LL_UCPD_Disable(UCPDx); + + if (UCPD1 == UCPDx) + { + /* Force reset of ucpd clock */ + LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_UCPD1); + + /* Release reset of ucpd clock */ + LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_UCPD1); + + /* Disable ucpd clock */ + LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_UCPD1); + + status = SUCCESS; + } + + return status; +} + +/** + * @brief Initialize the ucpd registers according to the specified parameters in UCPD_InitStruct. + * @note As some bits in ucpd configuration registers can only be written when the ucpd is disabled + * (ucpd_CR1_SPE bit =0), UCPD peripheral should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @param UCPDx UCPD Instance + * @param UCPD_InitStruct pointer to a @ref LL_UCPD_InitTypeDef structure that contains + * the configuration information for the UCPD peripheral. + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_UCPD_Init(UCPD_TypeDef *UCPDx, const LL_UCPD_InitTypeDef *UCPD_InitStruct) +{ + /* Check the ucpd Instance UCPDx*/ + assert_param(IS_UCPD_ALL_INSTANCE(UCPDx)); + + if (UCPD1 == UCPDx) + { + LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_UCPD1); + } + + + LL_UCPD_Disable(UCPDx); + + /*---------------------------- UCPDx CFG1 Configuration ------------------------*/ + MODIFY_REG(UCPDx->CFG1, + UCPD_CFG1_PSC_UCPDCLK | UCPD_CFG1_TRANSWIN | UCPD_CFG1_IFRGAP | UCPD_CFG1_HBITCLKDIV, + UCPD_InitStruct->psc_ucpdclk | (UCPD_InitStruct->transwin << UCPD_CFG1_TRANSWIN_Pos) | + (UCPD_InitStruct->IfrGap << UCPD_CFG1_IFRGAP_Pos) | UCPD_InitStruct->HbitClockDiv); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_UCPD_InitTypeDef field to default value. + * @param UCPD_InitStruct pointer to a @ref LL_UCPD_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct) +{ + /* Set UCPD_InitStruct fields to default values */ + UCPD_InitStruct->psc_ucpdclk = LL_UCPD_PSC_DIV2; + UCPD_InitStruct->transwin = 0x7; /* Divide by 8 */ + UCPD_InitStruct->IfrGap = 0x10; /* Divide by 17 */ + UCPD_InitStruct->HbitClockDiv = 0x0D; /* Divide by 14 to produce HBITCLK */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (UCPD1) */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usart.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usart.c new file mode 100644 index 000000000..aea3b7d29 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usart.c @@ -0,0 +1,451 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_usart.c + * @author MCD Application Team + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_usart.h" +#include "stm32h7rsxx_ll_rcc.h" +#include "stm32h7rsxx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5) \ + || defined(UART7) || defined(UART8) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Constants + * @{ + */ + +/* Definition of default baudrate value used for USART initialisation */ +#define USART_DEFAULT_BAUDRATE (9600U) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +#define IS_LL_USART_PRESCALER(__VALUE__) (((__VALUE__) == LL_USART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV256)) + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 12500000U) + +/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ +#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); + } + else if (USARTx == USART2) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); + } + else if (USARTx == USART3) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3); + } + else if (USARTx == UART4) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4); + } + else if (USARTx == UART5) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5); + } + else if (USARTx == UART7) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART7); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART7); + } + else if (USARTx == UART8) + { + /* Force reset of UART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART8); + + /* Release reset of UART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART8); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_PRESCALER(USART_InitStruct->PrescalerValue)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration --------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); + + /*---------------------------- USART CR2 Configuration --------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration --------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to + * USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration --------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + if (USARTx == USART1) + { + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE); + } + else if (USARTx == USART2) + { + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else if (USARTx == USART3) + { + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else if (USARTx == UART4) + { + periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else if (USARTx == UART5) + { + periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else if (USARTx == UART7) + { + periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else if (USARTx == UART8) + { + periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_USART234578_CLKSOURCE); + } + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->PrescalerValue, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); + } + + /*---------------------------- USART PRESC Configuration ----------------------- + * Configure USARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: USART_PRESC_PRESCALER bits according to USART_InitStruct->PrescalerValue value. + */ + LL_USART_SetPrescaler(USARTx, USART_InitStruct->PrescalerValue); + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->PrescalerValue = LL_USART_PRESCALER_DIV1; + USART_InitStruct->BaudRate = USART_DEFAULT_BAUDRATE; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according + * to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 || UART7 || UART8 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + + diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usb.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usb.c new file mode 100644 index 000000000..972e062a8 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_usb.c @@ -0,0 +1,2316 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_hal.h" + +/** @addtogroup STM32H7RSxx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; +#if defined (USB_OTG_HS) + if (USBx == USB_OTG_HS) + { + if (cfg.phy_itface == USB_OTG_HS_EMBEDDED_PHY) + { + /* Init The UTMI Interface */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS); + } + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + if (cfg.dma_enable == 1U) + { + USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; + USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; + } + } + else +#endif /* defined (USB_OTG_HS) */ + { + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + if (cfg.battery_charging_enable == 0U) + { + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + else + { + /* Deactivate the USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + } + + return ret; +} + + +/** + * @brief Set the USB turnaround time + * @param USBx USB Instance + * @param hclk: AHB clock frequency + * @retval USB turnaround time In PHY Clocks number + */ +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, + uint32_t hclk, uint8_t speed) +{ + uint32_t UsbTrd; + + /* The USBTRD is configured according to the tables below, depending on AHB frequency + used by application. In the low AHB frequency range it is used to stretch enough the USB response + time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access + latency to the Data FIFO */ + if (speed == USBD_FS_SPEED) + { + if ((hclk >= 14200000U) && (hclk < 15000000U)) + { + /* hclk Clock Range between 14.2-15 MHz */ + UsbTrd = 0xFU; + } + else if ((hclk >= 15000000U) && (hclk < 16000000U)) + { + /* hclk Clock Range between 15-16 MHz */ + UsbTrd = 0xEU; + } + else if ((hclk >= 16000000U) && (hclk < 17200000U)) + { + /* hclk Clock Range between 16-17.2 MHz */ + UsbTrd = 0xDU; + } + else if ((hclk >= 17200000U) && (hclk < 18500000U)) + { + /* hclk Clock Range between 17.2-18.5 MHz */ + UsbTrd = 0xCU; + } + else if ((hclk >= 18500000U) && (hclk < 20000000U)) + { + /* hclk Clock Range between 18.5-20 MHz */ + UsbTrd = 0xBU; + } + else if ((hclk >= 20000000U) && (hclk < 21800000U)) + { + /* hclk Clock Range between 20-21.8 MHz */ + UsbTrd = 0xAU; + } + else if ((hclk >= 21800000U) && (hclk < 24000000U)) + { + /* hclk Clock Range between 21.8-24 MHz */ + UsbTrd = 0x9U; + } + else if ((hclk >= 24000000U) && (hclk < 27700000U)) + { + /* hclk Clock Range between 24-27.7 MHz */ + UsbTrd = 0x8U; + } + else if ((hclk >= 27700000U) && (hclk < 32000000U)) + { + /* hclk Clock Range between 27.7-32 MHz */ + UsbTrd = 0x7U; + } + else /* if(hclk >= 32000000) */ + { + /* hclk Clock Range between 32-200 MHz */ + UsbTrd = 0x6U; + } + } + else if (speed == USBD_HS_SPEED) + { + UsbTrd = USBD_HS_TRDT_VALUE; + } + else + { + UsbTrd = USBD_DEFAULT_TRDT_VALUE; + } + + USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @arg USB_HOST_MODE Host mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) +{ + uint32_t ms = 0U; + + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if (mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + + do + { + HAL_Delay(10U); + ms += 10U; + } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < HAL_USB_CURRENT_MODE_MAX_DELAY_MS)); + } + else if (mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + do + { + HAL_Delay(10U); + ms += 10U; + } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < HAL_USB_CURRENT_MODE_MAX_DELAY_MS)); + } + else + { + return HAL_ERROR; + } + + if (ms == HAL_USB_CURRENT_MODE_MAX_DELAY_MS) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB_OTG controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + for (i = 0U; i < 15U; i++) + { + USBx->DIEPTXF[i] = 0U; + } + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + /* Disable USB PHY pulldown resistors */ + USBx->GCCFG &= ~USB_OTG_GCCFG_PULLDOWNEN; + } + + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + /* Deactivate VBUS Sensing B */ + USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + /* B-peripheral session valid override enable */ + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + USBx->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; + USBx->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; + } + else + { + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } + } + else + { + /* B-peripheral session valid override disable */ + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + USBx->GCCFG &= ~USB_OTG_GCCFG_VBVALEXTOEN; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBVALOVAL; + } + else + { + USBx->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOEN; + USBx->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOVAL; + } + + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; + } + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + if (cfg.speed == USBD_HS_SPEED) + { + /* Set Core speed to High speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); + } + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); + } + + /* Flush the FIFOs */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + if (i == 0U) + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; + } + else + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; + } + } + else + { + USBx_INEP(i)->DIEPCTL = 0U; + } + + USBx_INEP(i)->DIEPTSIZ = 0U; + USBx_INEP(i)->DIEPINT = 0xFB7FU; + } + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + if (i == 0U) + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; + } + else + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; + } + } + else + { + USBx_OUTEP(i)->DOEPCTL = 0U; + } + + USBx_OUTEP(i)->DOEPTSIZ = 0U; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFFU; + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; + + if (cfg.Sof_enable != 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == 1U) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return ret; +} + +/** + * @brief USB_FlushTxFifo Flush a Tx FIFO + * @param USBx Selected device + * @param num FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush TX Fifo */ + count = 0U; + USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo Flush Rx FIFO + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush RX Fifo */ + count = 0U; + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx Selected device + * @param speed device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(const USB_OTG_GlobalTypeDef *USBx, uint8_t speed) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed Return the Dev Speed + * @param USBx Selected device + * @retval speed device speed + * This parameter can be one of these values: + * @arg USBD_HS_SPEED: High speed mode + * @arg USBD_FS_SPEED: Full speed mode + */ +uint8_t USB_GetDevSpeed(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t speed; + uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; + + if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) + { + speed = USBD_HS_SPEED; + } + else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USBD_FS_SPEED; + } + else + { + speed = 0xFU; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_USBAEP; + } + } + return HAL_OK; +} + +/** + * @brief Activate and configure a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DOEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | + USB_OTG_DIEPCTL_MPSIZ | + USB_OTG_DIEPCTL_TXFNUM | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_EPTYP); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | + USB_OTG_DOEPCTL_MPSIZ | + USB_OTG_DOEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_EPTYP); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + uint16_t pktcnt; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if (epnum == 0U) + { + if (ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & + (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); + } + + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (epnum == 0U) + { + if (ep->xfer_len > 0U) + { + ep->xfer_len = ep->maxpacket; + } + + /* Store transfer size, for EP0 this is equal to endpoint max packet size */ + ep->xfer_size = ep->maxpacket; + + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + if (ep->xfer_len == 0U) + { + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); + ep->xfer_size = ep->maxpacket * pktcnt; + + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPStoptXfer Stop transfer on an EP + * @param USBx usb device instance + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStopXfer(const USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* EP enable, IN data in FIFO */ + if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); + } + } + else /* OUT endpoint */ + { + if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); + } + } + + return ret; +} + + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx Selected device + * @param src pointer to source buffer + * @param ch_ep_num endpoint or host channel number + * @param len Number of bytes to write + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pSrc = src; + uint32_t count32b; + uint32_t i; + + if (dma == 0U) + { + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) + { + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + pSrc++; + pSrc++; + pSrc++; + } + } + + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the RX FIFO + * @param USBx Selected device + * @param dest source pointer + * @param len Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pDest = dest; + uint32_t pData; + uint32_t i; + uint32_t count32b = (uint32_t)len >> 2U; + uint16_t remaining_bytes = len % 4U; + + for (i = 0U; i < count32b; i++) + { + __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); + pDest++; + pDest++; + pDest++; + pDest++; + } + + /* When Number of data is not word aligned, read the remaining byte */ + if (remaining_bytes != 0U) + { + i = 0U; + __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U)); + + do + { + *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i))); + i++; + pDest++; + remaining_bytes--; + } while (remaining_bytes != 0U); + } + + return ((void *)pDest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Clear Pending interrupt */ + for (i = 0U; i < 15U; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + /* Flush the FIFO */ + ret = USB_FlushRxFifo(USBx); + if (ret != HAL_OK) + { + return ret; + } + + ret = USB_FlushTxFifo(USBx, 0x10U); + if (ret != HAL_OK) + { + return ret; + } + + return ret; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(const USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx Selected device + * @retval USB Global Interrupt status + */ +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadChInterrupts: return USB channel interrupt status + * @param USBx Selected device + * @param chnum Channel number + * @retval USB Channel Interrupt status + */ +uint32_t USB_ReadChInterrupts(const USB_OTG_GlobalTypeDef *USBx, uint8_t chnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_HC(chnum)->HCINT; + tmpreg &= USBx_HC(chnum)->HCINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval USB Device OUT EP interrupt status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xffff0000U) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval USB Device IN EP interrupt status + */ +uint32_t USB_ReadDevAllInEpInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xFFFFU)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + uint32_t msk; + uint32_t emp; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; + tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; + + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS &= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx Selected device + * @retval return core mode : Host or Device + * This parameter can be one of these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(const USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS) & 0x1U); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* Set the MPS of the IN EP0 to 64 bytes */ + USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(const USB_OTG_GlobalTypeDef *USBx, uint8_t dma, const uint8_t *psetup) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + + if (gSNPSiD > USB_OTG_CORE_ID_300A) + { + if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + return HAL_OK; + } + } + + USBx_OUTEP(0U)->DOEPTSIZ = 0U; + USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); + USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + if (dma == 1U) + { + USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; + /* EP enable */ + USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; + } + + return HAL_OK; +} + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Core Soft Reset */ + count = 0U; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + /* Enable USB PHY pulldown resistors */ + USBx->GCCFG |= USB_OTG_GCCFG_PULLDOWNEN; + } + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + /* Disable VBUS override */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBVALOVAL | USB_OTG_GCCFG_VBVALEXTOEN); + } + + /* Disable VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) + { + /* Disable Battery chargin detector */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + } + else + { + /* Disable Battery chargin detector */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + } + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + if (cfg.speed == USBH_FSLS_SPEED) + { + /* Force Device Enumeration to FS/LS mode only */ + USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + + /* Make sure the FIFOs are flushed. */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending HC Interrupts */ + for (i = 0U; i < cfg.Host_channels; i++) + { + USBx_HC(i)->HCINT = CLEAR_INTERRUPT_MASK; + USBx_HC(i)->HCINTMSK = 0U; + } + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = CLEAR_INTERRUPT_MASK; +#if defined (USB_OTG_HS) + if (USBx == USB_OTG_HS) + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x200U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); + USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); + } + else +#endif /* defined (USB_OTG_HS) */ + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x80U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); + USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); + } + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ + USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return ret; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx Selected device + * @param freq clock frequency + * This parameter can be one of these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(const USB_OTG_GlobalTypeDef *USBx, uint8_t freq) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = HFIR_48_MHZ; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = HFIR_6_MHZ; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay(100U); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + HAL_Delay(10U); + + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state VBUS state + * This parameter can be one of these values: + * 0 : Deactivate VBUS + * 1 : Activate VBUS + * @retval HAL status + */ +HAL_StatusTypeDef USB_DriveVbus(const USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed : Host speed + * This parameter can be one of these values: + * @arg HCD_SPEED_HIGH: High speed mode + * @arg HCD_SPEED_FULL: Full speed mode + * @arg HCD_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to 32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t HCcharEpDir; + uint32_t HCcharLowSpeed; + uint32_t HostCoreSpeed; + + /* Clear old interrupt conditions for this host channel. */ + USBx_HC((uint32_t)ch_num)->HCINT = CLEAR_INTERRUPT_MASK; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_NAKM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + else + { +#if defined (USB_OTG_HS) + if (USBx == USB_OTG_HS) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM; + } +#endif /* defined (USB_OTG_HS) */ + } + break; + + case EP_TYPE_INTR: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_NAKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + + default: + ret = HAL_ERROR; + break; + } + + /* Clear Hub Start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = 0U; + + /* Enable host channel Halt interrupt */ + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + if ((epnum & 0x80U) == 0x80U) + { + HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; + } + else + { + HCcharEpDir = 0U; + } + + HostCoreSpeed = USB_GetHostSpeed(USBx); + + /* LS device plugged to HUB */ + if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED)) + { + HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; + } + else + { + HCcharLowSpeed = 0U; + } + + USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | + ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | + (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | + ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | + USB_OTG_HCCHAR_MC_0 | HCcharEpDir | HCcharLowSpeed; + + if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) + { + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; + } + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t ch_num = (uint32_t)hc->ch_num; + __IO uint32_t tmpreg; + uint8_t is_oddframe; + uint16_t len_words; + uint16_t num_packets; + uint16_t max_hc_pkt_count = HC_MAX_PKT_CNT; + +#if defined (USB_OTG_HS) + if (USBx == USB_OTG_HS) + { + /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ + if (dma == 1U) + { + if (((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK)) && (hc->do_ssplit == 0U)) + { + + USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_NAKM); + } + } + else + { + if ((hc->speed == USBH_HS_SPEED) && (hc->do_ping == 1U)) + { + (void)USB_DoPing(USBx, hc->ch_num); + return HAL_OK; + } + } + } +#endif /* defined (USB_OTG_HS) */ + + if (hc->do_ssplit == 1U) + { + /* Set number of packet to 1 for Split transaction */ + num_packets = 1U; + + if (hc->ep_is_in != 0U) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + if (hc->ep_type == EP_TYPE_ISOC) + { + if (hc->xfer_len > ISO_SPLT_MPS) + { + /* Isochrone Max Packet Size for Split mode */ + hc->XferSize = hc->max_packet; + hc->xfer_len = hc->XferSize; + + if ((hc->iso_splt_xactPos == HCSPLT_BEGIN) || (hc->iso_splt_xactPos == HCSPLT_MIDDLE)) + { + hc->iso_splt_xactPos = HCSPLT_MIDDLE; + } + else + { + hc->iso_splt_xactPos = HCSPLT_BEGIN; + } + } + else + { + hc->XferSize = hc->xfer_len; + + if ((hc->iso_splt_xactPos != HCSPLT_BEGIN) && (hc->iso_splt_xactPos != HCSPLT_MIDDLE)) + { + hc->iso_splt_xactPos = HCSPLT_FULL; + } + else + { + hc->iso_splt_xactPos = HCSPLT_END; + } + } + } + else + { + if ((dma == 1U) && (hc->xfer_len > hc->max_packet)) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + hc->XferSize = hc->xfer_len; + } + } + } + } + else + { + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0U) + { + num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + } + else + { + num_packets = 1U; + } + + /* + * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of + * max_packet size. + */ + if (hc->ep_is_in != 0U) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + hc->XferSize = hc->xfer_len; + } + } + + /* Initialize the HCTSIZn register */ + USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) | + (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); + + if (dma != 0U) + { + /* xfer_buff MUST be 32-bits aligned */ + USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; + } + + is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; + USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; + + if (hc->do_ssplit == 1U) + { + /* Set Hub start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = ((uint32_t)hc->hub_addr << USB_OTG_HCSPLT_HUBADDR_Pos) | + (uint32_t)hc->hub_port_nbr | USB_OTG_HCSPLT_SPLITEN; + + /* unmask ack & nyet for IN/OUT transactions */ + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_NYET); + + if ((hc->do_csplit == 1U) && (hc->ep_is_in == 0U)) + { + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT; + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET; + } + + if (((hc->ep_type == EP_TYPE_ISOC) || (hc->ep_type == EP_TYPE_INTR)) && + (hc->do_csplit == 1U) && (hc->ep_is_in == 1U)) + { + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT; + } + + /* Position management for iso out transaction on split mode */ + if ((hc->ep_type == EP_TYPE_ISOC) && (hc->ep_is_in == 0U)) + { + /* Set data payload position */ + switch (hc->iso_splt_xactPos) + { + case HCSPLT_BEGIN: + /* First data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_1; + break; + + case HCSPLT_MIDDLE: + /* Middle data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_Pos; + break; + + case HCSPLT_END: + /* End data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_0; + break; + + case HCSPLT_FULL: + /* Entire data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS; + break; + + default: + break; + } + } + } + else + { + /* Clear Hub Start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = 0U; + } + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + + /* make sure to set the correct ep direction */ + if (hc->ep_is_in != 0U) + { + tmpreg |= USB_OTG_HCCHAR_EPDIR; + } + else + { + tmpreg &= ~USB_OTG_HCCHAR_EPDIR; + } + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + if (dma != 0U) /* dma mode */ + { + return HAL_OK; + } + + if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U) && (hc->do_csplit == 0U)) + { + switch (hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + + /* check if there is enough space in FIFO space */ + if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + /* check if there is enough space in FIFO space */ + if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return ((USBx_HOST->HAINT) & 0xFFFFU); +} + +/** + * @brief Halt a host channel + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(const USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t hcnum = (uint32_t)hc_num; + __IO uint32_t count = 0U; + uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; + uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; + uint32_t SplitEna = (USBx_HC(hcnum)->HCSPLT & USB_OTG_HCSPLT_SPLITEN) >> 31; + + /* In buffer DMA, Channel disable must not be programmed for non-split periodic channels. + At the end of the next uframe/frame (in the worst case), the core generates a channel halted + and disables the channel automatically. */ + + if ((((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && (SplitEna == 0U)) && + ((ChannelEna == 0U) || (((HcEpType == HCCHAR_ISOC) || (HcEpType == HCCHAR_INTR))))) + { + return HAL_OK; + } + + /* Check for space in the request queue to issue the halt. */ + if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U) + { + if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(const USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t chnum = (uint32_t)ch_num; + uint32_t num_packets = 1U; + uint32_t tmpreg; + + USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t count = 0U; + uint32_t value; + uint32_t i; + + (void)USB_DisableGlobalInt(USBx); + + /* Flush USB FIFO */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Flush out any leftover queued requests. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = CLEAR_INTERRUPT_MASK; + USBx->GINTSTS = CLEAR_INTERRUPT_MASK; + + (void)USB_EnableGlobalInt(USBx); + + return ret; +} + +/** + * @brief USB_ActivateRemoteWakeup active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_utils.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_utils.c new file mode 100644 index 000000000..938a75c7d --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_ll_utils.c @@ -0,0 +1,866 @@ +/** + ****************************************************************************** + * @file stm32h7rsxx_ll_utils.c + * @author MCD Application Team + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7rsxx_ll_utils.h" +#include "stm32h7rsxx_ll_rcc.h" +#include "stm32h7rsxx_ll_pwr.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32H7RSxx_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ +#define UTILS_MAX_FREQUENCY_SCALE0 467000000U /*!< Maximum frequency for system clock at power scale 0, in Hz */ +#define UTILS_MAX_FREQUENCY_SCALE1 365000000U /*!< Maximum frequency for system clock at power scale 1, in Hz */ + +/* Defines used for PLL range */ +#define UTILS_PLLVCO_INPUT_MIN1 1000000U /*!< Frequency min for the medium range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX1 2000000U /*!< Frequency max for the medium range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MIN2 2000000U /*!< Frequency min for the wide range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX2 4000000U /*!< Frequency max for the wide range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MIN3 4000000U /*!< Frequency min for the wide range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX3 8000000U /*!< Frequency max for the wide range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MIN4 8000000U /*!< Frequency min for the wide range PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX4 16000000U /*!< Frequency max for the wide range PLLVCO input, in Hz */ + +#define UTILS_PLLVCO_MEDIUM_OUTPUT_MIN 150000000U /*!< Frequency min for the medium range PLLVCO output, in Hz */ +#define UTILS_PLLVCO_WIDE_OUTPUT_MIN 400000000U /*!< Frequency min for the wide range PLLVCO output, in Hz */ +#define UTILS_PLLVCO_MEDIUM_OUTPUT_MAX 420000000U /*!< Frequency max for the medium range PLLVCO output, in Hz */ +#define UTILS_PLLVCO_WIDE_OUTPUT_MAX 1600000000U /*!< Frequency max for the wide range PLLVCO output, in Hz */ + +/* Defines used for HSE range */ +#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ +#define UTILS_HSE_FREQUENCY_MAX 50000000U /*!< Frequency max for HSE frequency, in Hz */ + +/* Defines used for FLASH latency according to HCLK Frequency at */ +/* VOS0 (highest power/frequency) or VOS1 (lowest power/frequency) */ +#define UTILS_SCALE0_LATENCY0_FREQ 40000000U /*!< HCLK frequency to set FLASH latency 0 in power scale 0 */ +#define UTILS_SCALE0_LATENCY1_FREQ 80000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 0 */ +#define UTILS_SCALE0_LATENCY2_FREQ 120000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 0 */ +#define UTILS_SCALE0_LATENCY3_FREQ 160000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 0 */ +#define UTILS_SCALE0_LATENCY4_FREQ 200000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 0 */ +#define UTILS_SCALE0_LATENCY5_FREQ 234000000U /*!< HCLK frequency to set FLASH latency 5 in power scale 0 */ + +#define UTILS_SCALE1_LATENCY0_FREQ 36000000U /*!< HCLK frequency to set FLASH latency 0 in power scale 1 */ +#define UTILS_SCALE1_LATENCY1_FREQ 72000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ +#define UTILS_SCALE1_LATENCY2_FREQ 108000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */ +#define UTILS_SCALE1_LATENCY3_FREQ 144000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */ +#define UTILS_SCALE1_LATENCY4_FREQ 180000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */ +#define UTILS_SCALE1_LATENCY5_FREQ 183000000U /*!< HCLK frequency to set FLASH latency 5 in power scale 1 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) + +#define IS_LL_UTILS_AHB_DIV(__VALUE__) (((__VALUE__) == LL_RCC_AHB_DIV_1) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_2) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_4) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_8) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_16) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_64) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_128) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_256) \ + || ((__VALUE__) == LL_RCC_AHB_DIV_512)) + +#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_16)) + +#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB2_DIV_16)) + +#define IS_LL_UTILS_APB4_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB4_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB4_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB4_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB4_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB4_DIV_16)) + +#define IS_LL_UTILS_APB5_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB5_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB5_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB5_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB5_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB5_DIV_16)) + +#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 63U)) + +#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 420U)) + +#define IS_LL_UTILS_PLLP_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 128U)) + +#define IS_LL_UTILS_FRACN_VALUE(__VALUE__) ((__VALUE__) <= 0x1FFFU) + +#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__, __RANGE__) \ + ((((__RANGE__) == LL_RCC_PLLINPUTRANGE_1_2) && \ + (UTILS_PLLVCO_INPUT_MIN1 <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX1)) || \ + (((__RANGE__) == LL_RCC_PLLINPUTRANGE_2_4) && \ + (UTILS_PLLVCO_INPUT_MIN2 <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX2)) || \ + (((__RANGE__) == LL_RCC_PLLINPUTRANGE_4_8) && \ + (UTILS_PLLVCO_INPUT_MIN3 <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX3)) || \ + (((__RANGE__) == LL_RCC_PLLINPUTRANGE_8_16) && \ + (UTILS_PLLVCO_INPUT_MIN4 <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX4))) + +#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__, __RANGE__) \ + ((((__RANGE__) == LL_RCC_PLLVCORANGE_MEDIUM) && \ + (UTILS_PLLVCO_MEDIUM_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_MEDIUM_OUTPUT_MAX)) || \ + (((__RANGE__) == LL_RCC_PLLVCORANGE_WIDE) && \ + (UTILS_PLLVCO_WIDE_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_WIDE_OUTPUT_MAX))) + +#define IS_LL_UTILS_CHECK_VCO_RANGES(__RANGEIN__, __RANGEOUT__) \ + ((((__RANGEIN__) == LL_RCC_PLLINPUTRANGE_1_2) && \ + ((__RANGEOUT__) == LL_RCC_PLLVCORANGE_MEDIUM)) || \ + (((__RANGEIN__) != LL_RCC_PLLINPUTRANGE_1_2) && \ + ((__RANGEOUT__) == LL_RCC_PLLVCORANGE_WIDE))) + +#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) \ + ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE0) ? \ + ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE0) : ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1)) + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) \ + (((__STATE__) == LL_UTILS_HSEBYPASS_ON) || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) \ + (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Functions UTILS Private functions + * @{ + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, + const LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +static ErrorStatus UTILS_IsPLLsNotBusy(void); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param CPU_Frequency Core frequency in Hz + * @note CPU_Frequency can be calculated thanks to RCC helper macro or function + * @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_Init1msTick(uint32_t CPU_Frequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(CPU_Frequency, 1000U); +} + + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + uint32_t count = Delay; + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + + /* Add a period to ensure minimum wait */ + if (count < LL_MAX_DELAY) + { + count++; + } + + while (count != 0U) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + count--; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_EF_SYSTEM + * @brief System Configuration functions + * + @verbatim + =============================================================================== + ##### System Configuration functions ##### + =============================================================================== + [..] + System, AXI, AHB and APB buses clocks configuration + + (+) The maximum frequency of the SYSCLK is 464 MHz and HCLK is 232 MHz. + (+) The maximum frequency of the PCLK1, PCLK2, PCLK4 and PCLK5 is 116 MHz. + @endverbatim + @internal + Depending on the device voltage range, the maximum frequency should be + adapted accordingly: + (++) +---------------------------------------------------------------------------+ + (++) | Wait states | AXI interface clock frequency (MHz) vs Vcore range | + (++) | |-----------------------------------------------------| + (++) | (Latency) | voltage scale 1 | voltage scale 0 | + (++) | | 1.15V - 1.26V | 1.26V - 1.40V | + (++) |---------------------|--------------------------|--------------------------| + (++) | 0WS (1 CPU cycle) | 0 < HCLK <= 36 | 0 < HCLK <= 40 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 1WS (2 CPU cycles) | 36 < HCLK <= 72 | 40 < HCLK <= 80 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 2WS (3 CPU cycles) | 72 < HCLK <= 108 | 80 < HCLK <= 120 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 3WS (4 CPU cycles) | 108 < HCLK <= 144 | 120 < HCLK <= 160 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 4WS (5 CPU cycles) | 144 < HCLK <= 180 | 160 < HCLK <= 200 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 5WS (6 CPU cycles) | 180 < HCLK <= 216 | 200 < HCLK <= 240 | + (++) |---------------------|--------------------------|--------------------------| + (++) | 6WS (7 CPU cycles) | 216 < HCLK <= 252 | | + (++) |---------------------|--------------------------|--------------------------| + + @endinternal + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param CPU_Frequency Core frequency in Hz + * @note CPU_Frequency can be calculated thanks to RCC helper macro or function + * @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t CPU_Frequency) +{ + /* SYSCLK clock frequency */ + SystemCoreClock = CPU_Frequency; +} + +/** + * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLP) + * - PLLM: ensure that the VCO input frequency ranges from 1 to 16 MHz (PLLVCO_input = HSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is + * between 150 and 420 MHz (Medium) or + * between 400 to 1600 MHz (Wide) (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLP: ensure that max frequency at 464 MHz is reached (PLLVCO_output / PLLP) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + * + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status; +#ifdef USE_FULL_ASSERT + uint32_t vcoinput_freq; + uint32_t vcooutput_freq; +#endif /* USE_FULL_ASSERT */ + uint32_t pllfreq; + uint32_t hsi_clk; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); + assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); + assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP)); + assert_param(IS_LL_UTILS_FRACN_VALUE(UTILS_PLLInitStruct->FRACN)); + + hsi_clk = (HSI_VALUE >> (LL_RCC_HSI_GetDivider() >> RCC_CR_HSIDIV_Pos)); + + /* Check VCO Input frequency */ +#ifdef USE_FULL_ASSERT + vcoinput_freq = hsi_clk / UTILS_PLLInitStruct->PLLM; + assert_param(IS_LL_UTILS_PLLVCO_INPUT(vcoinput_freq, UTILS_PLLInitStruct->VCO_Input)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO Output frequency */ +#ifdef USE_FULL_ASSERT + vcooutput_freq = LL_RCC_CalcPLLClockFreq(hsi_clk, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->FRACN, 1UL); + assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(vcooutput_freq, UTILS_PLLInitStruct->VCO_Output)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO Input ranges */ + assert_param(IS_LL_UTILS_CHECK_VCO_RANGES(UTILS_PLLInitStruct->VCO_Input, UTILS_PLLInitStruct->VCO_Output)); + + /* Check that no PLL is enabled and thus ready for configuration */ + if (UTILS_IsPLLsNotBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(hsi_clk, UTILS_PLLInitStruct); + + /* Enable HSI if not enabled */ + if (LL_RCC_HSI_IsReady() != 1U) + { + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + { + /* Wait for HSI ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL1FRACN_Disable(); + LL_RCC_PLL_SetSource(LL_RCC_PLLSOURCE_HSI); + LL_RCC_PLL1_SetVCOInputRange(UTILS_PLLInitStruct->VCO_Input); + LL_RCC_PLL1_SetVCOOutputRange(UTILS_PLLInitStruct->VCO_Output); + LL_RCC_PLL1_SetM(UTILS_PLLInitStruct->PLLM); + LL_RCC_PLL1_SetN(UTILS_PLLInitStruct->PLLN); + LL_RCC_PLL1_SetP(UTILS_PLLInitStruct->PLLP); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + LL_RCC_PLL1FRACN_Enable(); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief This function configures system clock at maximum frequency with CSI as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = (((CSI frequency / PLLM) * PLLN) / PLLP) + * - PLLM: ensure that the VCO input frequency ranges from 1 to 4 MHz (PLLVCO_input = CSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is + * between 150 and 420 MHz (Medium) or + * between 400 to 1600 MHz (Wide) (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLP: ensure that max frequency at 464 MHz is reached (PLLVCO_output / PLLP) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + * + */ +ErrorStatus LL_PLL_ConfigSystemClock_CSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status; +#ifdef USE_FULL_ASSERT + uint32_t vcoinput_freq; + uint32_t vcooutput_freq; +#endif /* USE_FULL_ASSERT */ + uint32_t pllfreq; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); + assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); + assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP)); + assert_param(IS_LL_UTILS_FRACN_VALUE(UTILS_PLLInitStruct->FRACN)); + + /* Check VCO Input frequency */ +#ifdef USE_FULL_ASSERT + vcoinput_freq = CSI_VALUE / UTILS_PLLInitStruct->PLLM; + assert_param(IS_LL_UTILS_PLLVCO_INPUT(vcoinput_freq, UTILS_PLLInitStruct->VCO_Input)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO Output frequency */ +#ifdef USE_FULL_ASSERT + vcooutput_freq = LL_RCC_CalcPLLClockFreq(CSI_VALUE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->FRACN, 1UL); + assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(vcooutput_freq, UTILS_PLLInitStruct->VCO_Output)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO Input ranges */ + assert_param(IS_LL_UTILS_CHECK_VCO_RANGES(UTILS_PLLInitStruct->VCO_Input, UTILS_PLLInitStruct->VCO_Output)); + + /* Check that no PLL is enabled and thus ready for configuration */ + if (UTILS_IsPLLsNotBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(CSI_VALUE, UTILS_PLLInitStruct); + + /* Enable CSI if not enabled */ + if (LL_RCC_CSI_IsReady() != 1U) + { + LL_RCC_CSI_Enable(); + while (LL_RCC_CSI_IsReady() != 1U) + { + /* Wait for CSI ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL1FRACN_Disable(); + LL_RCC_PLL_SetSource(LL_RCC_PLLSOURCE_CSI); + LL_RCC_PLL1_SetVCOInputRange(UTILS_PLLInitStruct->VCO_Input); + LL_RCC_PLL1_SetVCOOutputRange(UTILS_PLLInitStruct->VCO_Output); + LL_RCC_PLL1_SetM(UTILS_PLLInitStruct->PLLM); + LL_RCC_PLL1_SetN(UTILS_PLLInitStruct->PLLN); + LL_RCC_PLL1_SetP(UTILS_PLLInitStruct->PLLP); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + LL_RCC_PLL1FRACN_Enable(); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @brief This function configures system clock with HSE as clock source of the PLL + * @note The application need to ensure that PLL is disabled. + * @note Function is based on the following formula: + * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLP) + * - PLLM: ensure that the VCO input frequency ranges from 1 to 4 MHz (PLLVCO_input = CSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is + * between 150 and 420 MHz (Medium) or + * between 400 to 1600 MHz (Wide) (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLP: ensure that max frequency at 464 MHz is reached (PLLVCO_output / PLLP) + * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 50000000 + * @param HSEBypass This parameter can be one of the following values: + * @arg @ref LL_UTILS_HSEBYPASS_ON + * @arg @ref LL_UTILS_HSEBYPASS_OFF + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Max frequency configuration done + * - ERROR: Max frequency configuration not done + * + */ +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status; +#ifdef USE_FULL_ASSERT + uint32_t vcoinput_freq; + uint32_t vcooutput_freq; +#endif /* USE_FULL_ASSERT */ + uint32_t pllfreq; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); + assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); + assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP)); + assert_param(IS_LL_UTILS_FRACN_VALUE(UTILS_PLLInitStruct->FRACN)); + assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency)); + assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); + + /* Check VCO Input frequency */ +#ifdef USE_FULL_ASSERT + vcoinput_freq = HSEFrequency / UTILS_PLLInitStruct->PLLM; + assert_param(IS_LL_UTILS_PLLVCO_INPUT(vcoinput_freq, UTILS_PLLInitStruct->VCO_Input)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO output frequency */ +#ifdef USE_FULL_ASSERT + vcooutput_freq = LL_RCC_CalcPLLClockFreq(HSEFrequency, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->FRACN, 1U); + assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(vcooutput_freq, UTILS_PLLInitStruct->VCO_Output)); +#endif /* USE_FULL_ASSERT */ + + /* Check VCO Input/output ranges compatibility */ + assert_param(IS_LL_UTILS_CHECK_VCO_RANGES(UTILS_PLLInitStruct->VCO_Input, UTILS_PLLInitStruct->VCO_Output)); + + /* Check that no PLL is enabled and thus ready for configuration */ + if (UTILS_IsPLLsNotBusy() == SUCCESS) + { + /* Calculate the new PLL output frequency */ + pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct); + + /* Enable HSE if not enabled */ + if (LL_RCC_HSE_IsReady() != 1U) + { + /* Check if need to enable HSE bypass feature or not */ + if (HSEBypass == LL_UTILS_HSEBYPASS_ON) + { + LL_RCC_HSE_EnableBypass(); + } + else + { + LL_RCC_HSE_DisableBypass(); + } + + /* Enable HSE */ + LL_RCC_HSE_Enable(); + while (LL_RCC_HSE_IsReady() != 1U) + { + /* Wait for HSE ready */ + } + } + + /* Configure PLL */ + LL_RCC_PLL1FRACN_Disable(); + LL_RCC_PLL_SetSource(LL_RCC_PLLSOURCE_HSE); + LL_RCC_PLL1_SetVCOInputRange(UTILS_PLLInitStruct->VCO_Input); + LL_RCC_PLL1_SetVCOOutputRange(UTILS_PLLInitStruct->VCO_Output); + LL_RCC_PLL1_SetM(UTILS_PLLInitStruct->PLLM); + LL_RCC_PLL1_SetN(UTILS_PLLInitStruct->PLLN); + LL_RCC_PLL1_SetP(UTILS_PLLInitStruct->PLLP); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + LL_RCC_PLL1FRACN_Enable(); + LL_RCC_PLL1_SetFRACN(UTILS_PLLInitStruct->FRACN); + LL_RCC_PLL1FRACN_Enable(); + + /* Enable PLL and switch system clock to PLL */ + status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct); + } + else + { + /* Current PLL configuration cannot be modified */ + status = ERROR; + } + + return status; +} + +/** + * @} + */ + +/** + * @brief Update number of Flash wait states in line with new frequency and current + voltage range. + * @param HCLK_Frequency HCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency) +{ + ErrorStatus status = SUCCESS; + uint32_t timeout; + uint32_t getlatency; + uint32_t latency; + + /* Frequency cannot be equal to 0 */ + if (HCLK_Frequency == 0U) + { + status = ERROR; + } + else + { + if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE0) /* Scale 0 */ + { + if ((HCLK_Frequency > UTILS_SCALE0_LATENCY4_FREQ) && (HCLK_Frequency <= UTILS_SCALE0_LATENCY5_FREQ)) + { + latency = LL_FLASH_LATENCY_5; /* 5WS (6 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE0_LATENCY3_FREQ) && (HCLK_Frequency <= UTILS_SCALE0_LATENCY4_FREQ)) + { + latency = LL_FLASH_LATENCY_4; /* 4WS (5 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE0_LATENCY2_FREQ) && (HCLK_Frequency <= UTILS_SCALE0_LATENCY3_FREQ)) + { + latency = LL_FLASH_LATENCY_3; /* 3WS (4 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE0_LATENCY1_FREQ) && (HCLK_Frequency <= UTILS_SCALE0_LATENCY2_FREQ)) + { + latency = LL_FLASH_LATENCY_2; /* 2WS (3 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE0_LATENCY0_FREQ) && (HCLK_Frequency <= UTILS_SCALE0_LATENCY1_FREQ)) + { + latency = LL_FLASH_LATENCY_1; /* 1WS (2 CPU cycles) */ + } + else + { + latency = LL_FLASH_LATENCY_0; /* 0WS (1 CPU cycles) */ + } + } + else /* Scale 1 */ + { + if ((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ) && (HCLK_Frequency <= UTILS_SCALE1_LATENCY5_FREQ)) + { + latency = LL_FLASH_LATENCY_5; /* 5WS (6 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ) && (HCLK_Frequency <= UTILS_SCALE1_LATENCY4_FREQ)) + { + latency = LL_FLASH_LATENCY_4; /* 4WS (5 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ) && (HCLK_Frequency <= UTILS_SCALE1_LATENCY3_FREQ)) + { + latency = LL_FLASH_LATENCY_3; /* 3WS (4 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ) && (HCLK_Frequency <= UTILS_SCALE1_LATENCY2_FREQ)) + { + latency = LL_FLASH_LATENCY_2; /* 2WS (3 CPU cycles) */ + } + else if ((HCLK_Frequency > UTILS_SCALE1_LATENCY0_FREQ) && (HCLK_Frequency <= UTILS_SCALE1_LATENCY1_FREQ)) + { + latency = LL_FLASH_LATENCY_1; /* 1WS (2 CPU cycles) */ + } + else + { + latency = LL_FLASH_LATENCY_0; /* 0WS (1 CPU cycles) */ + } + } + + LL_FLASH_SetLatency(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + timeout = 2; + do + { + /* Wait for Flash latency to be updated */ + getlatency = LL_FLASH_GetLatency(); + timeout--; + } while ((getlatency != latency) && (timeout > 0U)); + + if (getlatency != latency) + { + status = ERROR; + } + } + + return status; +} + + +/** + * @} + */ + +/** @addtogroup UTILS_LL_Private_Functions + * @{ + */ + + +/** + * @brief Function to Get PLL Output frequency + * @param PLL_InputFrequency PLL input frequency (in Hz) + * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains + * the configuration information for the PLL. + * @retval PLL output frequency (in Hz) + */ +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, + const LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) +{ + uint32_t pllfreq; + + /* Check the parameters */ + assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); + assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); + assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP)); + assert_param(IS_LL_UTILS_FRACN_VALUE(UTILS_PLLInitStruct->FRACN)); + + pllfreq = LL_RCC_CalcPLLClockFreq(PLL_InputFrequency, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, + UTILS_PLLInitStruct->FRACN, UTILS_PLLInitStruct->PLLP); + + return pllfreq; +} + +/** + * @brief Check that all PLLs are not busy therefore configuration can be done + * @retval An ErrorStatus enumeration value: + * - SUCCESS: All PLLs are ready so configuration can be done + * - ERROR: One PLL at least is busy + */ +static ErrorStatus UTILS_IsPLLsNotBusy(void) +{ + ErrorStatus status = SUCCESS; + + /* Check if one of the PLL1 is busy */ + if (LL_RCC_PLL1_IsReady() != 0U) + { + /* PLL1 configuration cannot be done */ + status = ERROR; + } + + /* Check if one of the PLL2 is busy */ + if (LL_RCC_PLL2_IsReady() != 0U) + { + /* PLL2 configuration cannot be done */ + status = ERROR; + } + + /* Check if one of the PLL3 is busy */ + if (LL_RCC_PLL3_IsReady() != 0U) + { + /* PLL3 configuration cannot be done */ + status = ERROR; + } + + return status; +} + +/** + * @brief Function to enable PLL and switch system clock to PLL + * @param SYSCLK_Frequency SYSCLK frequency + * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains + * the configuration information for the BUS prescalers. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: No problem to switch system to PLL + * - ERROR: Problem to switch system to PLL + */ +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t new_sysclk_frequency; + uint32_t new_hclk_frequency; + + assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->SYSCLKDivider)); + assert_param(IS_LL_UTILS_AHB_DIV(UTILS_ClkInitStruct->AHBCLKDivider)); + assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); + assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); + assert_param(IS_LL_UTILS_APB4_DIV(UTILS_ClkInitStruct->APB4CLKDivider)); + assert_param(IS_LL_UTILS_APB5_DIV(UTILS_ClkInitStruct->APB5CLKDivider)); + + /* Calculate the new HCLK frequency */ + new_sysclk_frequency = LL_RCC_CALC_SYSCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->SYSCLKDivider); + new_hclk_frequency = LL_RCC_CALC_HCLK_FREQ(new_sysclk_frequency, UTILS_ClkInitStruct->AHBCLKDivider); + + /* Increasing the number of wait states because of higher CPU frequency */ + if (SystemCoreClock < new_sysclk_frequency) + { + /* Set FLASH latency to highest latency */ + status = LL_SetFlashLatency(new_hclk_frequency); + } + + /* Update system clock configuration */ + if (status == SUCCESS) + { + /* Enable PLL */ + LL_RCC_PLL1_Enable(); + while (LL_RCC_PLL1_IsReady() != 1U) + { + /* Wait for PLL ready */ + } + + LL_RCC_PLL1P_Enable(); + + /* Set All APBxPrescaler to the Highest Divider */ + LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_16); + LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_16); + LL_RCC_SetAPB4Prescaler(LL_RCC_APB4_DIV_16); + LL_RCC_SetAPB5Prescaler(LL_RCC_APB5_DIV_16); + + /* Set SYS prescaler*/ + LL_RCC_SetSysPrescaler(UTILS_ClkInitStruct->SYSCLKDivider); + + /* Set AHB prescaler*/ + LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider); + + /* Sysclk activation on the main PLL */ + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL1); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL1) + { + /* Wait for system clock switch to PLL */ + } + + /* Set APBn prescaler*/ + LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); + LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); + LL_RCC_SetAPB4Prescaler(UTILS_ClkInitStruct->APB4CLKDivider); + LL_RCC_SetAPB5Prescaler(UTILS_ClkInitStruct->APB5CLKDivider); + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (SystemCoreClock > new_sysclk_frequency) + { + /* Set FLASH latency to lowest latency */ + status = LL_SetFlashLatency(new_hclk_frequency); + } + + /* Update SystemCoreClock variable */ + if (status == SUCCESS) + { + LL_SetSystemCoreClock(new_sysclk_frequency); + } + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_util_i3c.c b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_util_i3c.c new file mode 100644 index 000000000..a7d1958e7 --- /dev/null +++ b/stm32cube/stm32h7rsxx/drivers/src/stm32h7rsxx_util_i3c.c @@ -0,0 +1,409 @@ +/** + ********************************************************************************************************************** + * @file stm32h7rsxx_util_i3c.c + * @author MCD Application Team + * @brief This utility help to calculate the different I3C Timing. + ********************************************************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ********************************************************************************************************************** + */ + +/* Includes ----------------------------------------------------------------------------------------------------------*/ +#include "stm32h7rsxx_util_i3c.h" + +/** @addtogroup STM32H7RSxx_UTIL_Driver + * @{ + */ + +/** @addtogroup UTILITY_I3C + * @{ + */ + +/* Private typedef ---------------------------------------------------------------------------------------------------*/ +/* Private define ----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_UTIL_Private_Define I3C Utility Private Define + * @{ + */ +#define SEC210PSEC (uint64_t)100000000000 /*!< 10ps, to take two decimal float of ns calculation */ +#define TI3CH_MIN 3200U /*!< Open drain & push pull SCL high min, 32ns */ +#define TI3CH_OD_MAX 4100U /*!< Open drain SCL high max, 41 ns */ +#define TI3CL_OD_MIN 20000U /*!< Open drain SCL low min, 200 ns */ +#define TFMPL_OD_MIN 50000U /*!< Fast Mode Plus Open drain SCL low min, 500 ns */ +#define TFML_OD_MIN 130000U /*!< Fast Mode Open drain SCL low min, 1300 ns */ +#define TFM_MIN 250000U /*!< Fast Mode, period min for ti3cclk, 2.5us */ +#define TSM_MIN 1000000U /*!< Standard Mode, period min for ti3cclk, 10us */ +#define TI3C_CAS_MIN 3840U /*!< Time SCL after START min, 38.4 ns */ +#define TCAPA 35000U /*!< Capacitor effect Value measure on Nucleo around 350ns */ +/** + * @} + */ + +/* Private macro -----------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_UTIL_Private_Macro I3C Utility Private Macro + * @{ + */ +#define DIV_ROUND_CLOSEST(x, d) (((x) + ((d) / 2U)) / (d)) +/** + * @} + */ + +/* Private function prototypes ---------------------------------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------------------------------------------------*/ +/** @defgroup I3C_UTIL_Exported_Functions I3C Utility Exported Functions + * @{ + */ + +/** @defgroup I3C_UTIL_EF_Computation Computation + * @{ + */ +/** + * @brief Calculate the I3C Controller timing according current I3C clock source and required I3C bus clock. + * @param pInputTiming : [IN] Pointer to an I3C_CtrlTimingTypeDef structure that contains + * the required parameter for I3C timing computation. + * @param pOutputConfig : [OUT] Pointer to an LL_I3C_CtrlBusConfTypeDef structure that contains + * the configuration information for the specified I3C. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Timing calculation successfully + * - ERROR: Parameters or timing calculation error + */ +ErrorStatus I3C_CtrlTimingComputation(const I3C_CtrlTimingTypeDef *pInputTiming, + LL_I3C_CtrlBusConfTypeDef *pOutputConfig) +{ + ErrorStatus status = SUCCESS; + + /* MIPI Standard constants */ + /* I3C: Open drain & push pull SCL high min, tDIG_H & tDIG_H_MIXED: 32 ns */ + uint32_t ti3ch_min = TI3CH_MIN; + + /* I3C: Open drain SCL high max, t_HIGH: 41 ns */ + uint32_t ti3ch_od_max = TI3CH_OD_MAX; + + /* I3C: Open drain SCL high max, tHIGH: 41 ns (Ti3ch_od_max= 410) + I3C (pure bus): Open drain SCL low min, tLOW_OD: 200 ns */ + uint32_t ti3cl_od_min = TI3CL_OD_MIN; + + /* I3C (mixed bus): Open drain SCL low min, + tLOW: 500 ns (FM+ I2C on the bus) + tLOW: 1300 ns (FM I2C on the bus) */ + uint32_t tfmpl_od_min = TFMPL_OD_MIN; + uint32_t tfml_od_min = TFML_OD_MIN; + + /* I2C: min ti3cclk + fSCL: 1 MHz (FM+) + fSCL: 100 kHz (SM) */ + uint32_t tfm_min = TFM_MIN; + uint32_t tsm_min = TSM_MIN; + + /* I3C: time SCL after START min, Tcas: 38,4 ns */ + uint32_t ti3c_cas_min = TI3C_CAS_MIN; + + /* Period Clock source */ + uint32_t ti3cclk = 0U; + + /* I3C: Push pull period */ + uint32_t ti3c_pp_min = 0U; + + /* I2C: Open drain period */ + uint32_t ti2c_od_min = 0U; + + /* Time for SDA rise to 70% VDD from GND, capacitor effect */ + /* Value measure on Nucleo around 350ns */ + uint32_t tcapa = TCAPA; + + /* Compute variable */ + uint32_t sclhi3c; + uint32_t scllpp; + uint32_t scllod; + uint32_t sclhi2c; + uint32_t oneus; + uint32_t free; + uint32_t sdahold; + + /* Verify Parameters */ + if (((pInputTiming->clockSrcFreq == 0U) || (pInputTiming->i3cPPFreq == 0U)) && + (pInputTiming->busType == I3C_PURE_I3C_BUS)) + { + status = ERROR; + } + + if (((pInputTiming->clockSrcFreq == 0U) || (pInputTiming->i3cPPFreq == 0U) || (pInputTiming->i2cODFreq == 0U)) && + (pInputTiming->busType == I3C_MIXED_BUS)) + { + status = ERROR; + } + + if (status == SUCCESS) + { + /* Period Clock source */ + ti3cclk = (uint32_t)((SEC210PSEC + ((uint64_t)pInputTiming->clockSrcFreq / (uint64_t)2)) / + (uint64_t)pInputTiming->clockSrcFreq); + + if ((pInputTiming->dutyCycle > 50U) || (ti3cclk == 0U)) + { + status = ERROR; + } + } + + if ((status == SUCCESS) && (ti3cclk != 0U)) + { + /* I3C: Push pull period */ + ti3c_pp_min = (uint32_t)((SEC210PSEC + ((uint64_t)pInputTiming->i3cPPFreq / (uint64_t)2)) / + (uint64_t)pInputTiming->i3cPPFreq); + + /* I2C: Open drain period */ + ti2c_od_min = (uint32_t)((SEC210PSEC + ((uint64_t)pInputTiming->i2cODFreq / (uint64_t)2)) / + (uint64_t)pInputTiming->i2cODFreq); + + if ((pInputTiming->busType != I3C_PURE_I3C_BUS) && (ti2c_od_min > tsm_min)) + { + status = ERROR; + } + } + + /* SCL Computation */ + if ((status == SUCCESS) && (ti3cclk != 0U)) + { + /* I3C SCL high level (push-pull & open drain) */ + if (pInputTiming->busType == I3C_PURE_I3C_BUS) + { + sclhi3c = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(ti3c_pp_min * pInputTiming->dutyCycle, ti3cclk), 100U) - 1U; + + /* Check if sclhi3c < ti3ch_min, in that case calculate sclhi3c based on ti3ch_min */ + if (((sclhi3c + 1U) * ti3cclk) < ti3ch_min) + { + sclhi3c = DIV_ROUND_CLOSEST(ti3ch_min, ti3cclk) - 1U; + + /* Check if sclhi3c < ti3ch_min */ + if (((sclhi3c + 1U) * ti3cclk) < ti3ch_min) + { + sclhi3c += 1U; + } + + scllpp = DIV_ROUND_CLOSEST(ti3c_pp_min, ti3cclk) - (sclhi3c + 1U) - 1U; + } + else + { + sclhi3c = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(ti3c_pp_min * pInputTiming->dutyCycle, ti3cclk), 100U) - 1U; + + /* Check if sclhi3c < ti3ch_min */ + if (((sclhi3c + 1U) * ti3cclk) < ti3ch_min) + { + sclhi3c += 1U; + } + + scllpp = DIV_ROUND_CLOSEST((ti3c_pp_min - ((sclhi3c + 1U) * ti3cclk) + (ti3cclk / 2U)), ti3cclk) - 1U; + } + + } + else + { + /* Warning: (sclhi3c + 1) * ti3cclk > Ti3ch_od_max expected */ + sclhi3c = DIV_ROUND_CLOSEST(ti3ch_od_max, ti3cclk) - 1U; + + if (((sclhi3c + 1U) * ti3cclk) < ti3ch_min) + { + sclhi3c += 1U; + } + else if (((sclhi3c + 1U) * ti3cclk) > ti3ch_od_max) + { + sclhi3c = (ti3ch_od_max / ti3cclk); + } + else + { + /* Do nothing, keep sclhi3c as previously calculated */ + } + + /* I3C SCL low level (push-pull) */ + /* tscllpp = (scllpp + 1) x ti3cclk */ + scllpp = DIV_ROUND_CLOSEST((ti3c_pp_min - ((sclhi3c + 1U) * ti3cclk)), ti3cclk) - 1U; + } + + /* Check if scllpp is superior at (ti3c_pp_min + 1/2 clock source cycle) */ + /* Goal is to choice the scllpp approach lowest, to have a value frequency highest approach as possible */ + uint32_t ideal_scllpp = (ti3c_pp_min - ((sclhi3c + 1U) * ti3cclk)); + if (((scllpp + 1U) * ti3cclk) >= (ideal_scllpp + (ti3cclk / 2U) + 1U)) + { + scllpp -= 1U; + } + + /* Check if scllpp + sclhi3c is inferior at (ti3c_pp_min + 1/2 clock source cycle) */ + /* Goal is to increase the scllpp, to have a value frequency not out of the clock request */ + if (((scllpp + sclhi3c + 1U + 1U) * ti3cclk) < (ideal_scllpp + (ti3cclk / 2U) + 1U)) + { + scllpp += 1U; + } + + /* I3C SCL low level (pure I3C bus) */ + if (pInputTiming->busType == I3C_PURE_I3C_BUS) + { + if (ti3c_pp_min < ti3cl_od_min) + { + scllod = DIV_ROUND_CLOSEST(ti3cl_od_min, ti3cclk) - 1U; + + if (((scllod + 1U) * ti3cclk) < ti3cl_od_min) + { + scllod += 1U; + } + } + else + { + scllod = scllpp; + } + + /* Verify that SCL Open drain Low duration is superior as SDA rise time 70% */ + if (((scllod + 1U) * ti3cclk) < tcapa) + { + scllod = DIV_ROUND_CLOSEST(tcapa, ti3cclk) + 1U; + } + + sclhi2c = 0U; /* I2C SCL not used in pure I3C bus */ + } + /* SCL low level on mixed bus (open-drain) */ + /* I2C SCL high level (mixed bus with I2C) */ + else + { + scllod = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(ti2c_od_min * (100U - pInputTiming->dutyCycle), + ti3cclk), 100U) - 1U; + + /* Mix Bus Fast Mode plus */ + if (ti2c_od_min < tfm_min) + { + if (((scllod + 1U) * ti3cclk) < tfmpl_od_min) + { + scllod = DIV_ROUND_CLOSEST(tfmpl_od_min, ti3cclk) - 1U; + } + } + /* Mix Bus Fast Mode */ + else + { + if (((scllod + 1U) * ti3cclk) < tfml_od_min) + { + scllod = DIV_ROUND_CLOSEST(tfml_od_min, ti3cclk) - 1U; + } + } + + sclhi2c = DIV_ROUND_CLOSEST((ti2c_od_min - ((scllod + 1U) * ti3cclk)), ti3cclk) - 1U; + } + + /* Clock After Start computation */ + + /* I3C pure bus: (Tcas + tcapa)/2 */ + if (pInputTiming->busType == I3C_PURE_I3C_BUS) + { + free = DIV_ROUND_CLOSEST((ti3c_cas_min + tcapa), (2U * ti3cclk)) + 1U; + } + /* I3C, I2C mixed: (scllod + tcapa)/2 */ + else + { + free = DIV_ROUND_CLOSEST((((scllod + 1U) * ti3cclk) + tcapa), (2U * ti3cclk)); + } + + /* One cycle hold time addition */ + /* By default 1/2 cycle: must be > 3 ns */ + if (ti3cclk > 600U) + { + sdahold = 0U; + } + else + { + sdahold = 1U; + } + + /* 1 microsecond reference */ + oneus = DIV_ROUND_CLOSEST(100000U, ti3cclk) - 2U; + + if ((scllpp > 0xFFU) || (sclhi3c > 0xFFU) || (scllod > 0xFFU) || (sclhi2c > 0xFFU) || + (free > 0xFFU) || (oneus > 0xFFU)) + { + /* Case of value is over 8bits, issue may be due to clocksource have a rate too high for bus clock request */ + /* Update the return status */ + status = ERROR; + } + else + { + /* SCL configuration */ + pOutputConfig->SCLPPLowDuration = (uint8_t)scllpp; + pOutputConfig->SCLI3CHighDuration = (uint8_t)sclhi3c; + pOutputConfig->SCLODLowDuration = (uint8_t)scllod; + pOutputConfig->SCLI2CHighDuration = (uint8_t)sclhi2c; + + /* Free, Idle and SDA hold time configuration */ + pOutputConfig->BusFreeDuration = (uint8_t)free; + pOutputConfig->BusIdleDuration = (uint8_t)oneus; + pOutputConfig->SDAHoldTime = (uint32_t)(sdahold << I3C_TIMINGR1_SDA_HD_Pos); + } + } + + return status; +} + +/** + * @brief Calculate the I3C Controller timing according current I3C clock source and required I3C bus clock. + * @param pInputTiming : [IN] Pointer to an I3C_TgtTimingTypeDef structure that contains + * the required parameter for I3C timing computation. + * @param pOutputConfig : [OUT] Pointer to an LL_I3C_TgtBusConfTypeDef structure that contains + * the configuration information for the specified I3C. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Timing calculation successfully + * - ERROR: Parameters or timing calculation error + */ +ErrorStatus I3C_TgtTimingComputation(const I3C_TgtTimingTypeDef *pInputTiming, + LL_I3C_TgtBusConfTypeDef *pOutputConfig) +{ + ErrorStatus status = SUCCESS; + uint32_t oneus; + uint32_t ti3cclk = 0U; + + /* Verify Parameters */ + if (pInputTiming->clockSrcFreq == 0U) + { + status = ERROR; + } + + if (status == SUCCESS) + { + /* Period Clock source */ + ti3cclk = (uint32_t)((SEC210PSEC + ((uint64_t)pInputTiming->clockSrcFreq / (uint64_t)2)) / + (uint64_t)pInputTiming->clockSrcFreq); + + /* Verify Parameters */ + if (ti3cclk == 0U) + { + status = ERROR; + } + } + + if ((status == SUCCESS) && (ti3cclk != 0U)) + { + /* 1 microsecond reference */ + oneus = DIV_ROUND_CLOSEST(100000U, ti3cclk) - 2U; + + /* Bus available time configuration */ + pOutputConfig->BusAvailableDuration = (uint8_t)oneus; + } + + return status; +} +/** + * @} + */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/soc/stm32h7r3xx.h b/stm32cube/stm32h7rsxx/soc/stm32h7r3xx.h new file mode 100644 index 000000000..7545c6c82 --- /dev/null +++ b/stm32cube/stm32h7rsxx/soc/stm32h7r3xx.h @@ -0,0 +1,23362 @@ +/** + ****************************************************************************** + * @file stm32h7r3xx.h + * @author MCD Application Team + * @brief CMSIS STM32H7R3xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +#ifndef STM32H7R3xx_H +#define STM32H7R3xx_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup ST + * @{ + */ + + +/** @addtogroup STM32H7R3xx + * @{ + */ + + +/** @addtogroup Configuration_of_CMSIS + * @{ + */ + + +/* =========================================================================================================================== */ +/* ================ Interrupt Number Definition ================ */ +/* =========================================================================================================================== */ + +typedef enum +{ +/* ======================================= ARM Cortex-M7 Specific Interrupt Numbers ======================================== */ + Reset_IRQn = -15, /*!< -15 Reset Vector, invoked on Power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< -14 Non maskable Interrupt, cannot be stopped or preempted */ + HardFault_IRQn = -13, /*!< -13 Hard Fault, all classes of Fault */ + MemoryManagement_IRQn = -12, /*!< -12 Memory Management, MPU mismatch, including Access Violation + and No Match */ + BusFault_IRQn = -11, /*!< -11 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory + related Fault */ + UsageFault_IRQn = -10, /*!< -10 Usage Fault, i.e. Undef Instruction, Illegal State Transition */ + SVCall_IRQn = -5, /*!< -5 System Service Call via SVC instruction */ + DebugMonitor_IRQn = -4, /*!< -4 Debug Monitor */ + PendSV_IRQn = -2, /*!< -2 Pendable request for system service */ + SysTick_IRQn = -1, /*!< -1 System Tick Timer */ + +/* =========================================== STM32H7R3xx Specific Interrupt Numbers ====================================== */ + PVD_PVM_IRQn = 0, /*!< PVD/PVM through EXTI Line detection */ + DTS_IRQn = 2, /*!< Digital Temperature Sensor interrupt */ + IWDG_IRQn = 3, /*!< Internal Watchdog interrupt */ + WWDG_IRQn = 4, /*!< Window Watchdog interrupt */ + RCC_IRQn = 5, /*!< RCC global interrupts through EXTI Line detection */ + FLASH_IRQn = 8, /*!< FLASH interrupts */ + RAMECC_IRQn = 9, /*!< RAMECC interrupts */ + FPU_IRQn = 10, /*!< FPU interrupt */ + TAMP_IRQn = 13, /*!< Tamper and TimeStamp interrupts through EXTI Line detection */ + EXTI0_IRQn = 16, /*!< EXTI Line0 interrupt */ + EXTI1_IRQn = 17, /*!< EXTI Line1 interrupt */ + EXTI2_IRQn = 18, /*!< EXTI Line2 interrupt */ + EXTI3_IRQn = 19, /*!< EXTI Line3 interrupt */ + EXTI4_IRQn = 20, /*!< EXTI Line4 interrupt */ + EXTI5_IRQn = 21, /*!< EXTI Line5 interrupt */ + EXTI6_IRQn = 22, /*!< EXTI Line6 interrupt */ + EXTI7_IRQn = 23, /*!< EXTI Line7 interrupt */ + EXTI8_IRQn = 24, /*!< EXTI Line8 interrupt */ + EXTI9_IRQn = 25, /*!< EXTI Line9 interrupt */ + EXTI10_IRQn = 26, /*!< EXTI Line10 interrupt */ + EXTI11_IRQn = 27, /*!< EXTI Line11 interrupt */ + EXTI12_IRQn = 28, /*!< EXTI Line12 interrupt */ + EXTI13_IRQn = 29, /*!< EXTI Line13 interrupt */ + EXTI14_IRQn = 30, /*!< EXTI Line14 interrupt */ + EXTI15_IRQn = 31, /*!< EXTI Line15 interrupt */ + RTC_IRQn = 32, /*!< RTC Wakeup and Alarm interrupts through EXTI Line detection */ + PKA_IRQn = 35, /*!< PKA interrupt */ + HASH_IRQn = 36, /*!< HASH interrupt */ + RNG_IRQn = 37, /*!< RNG global interrupt */ + ADC1_2_IRQn = 38, /*!< ADC1 & ADC2 interrupt */ + GPDMA1_Channel0_IRQn = 39, /*!< GPDMA1 Channel 0 interrupt */ + GPDMA1_Channel1_IRQn = 40, /*!< GPDMA1 Channel 1 interrupt */ + GPDMA1_Channel2_IRQn = 41, /*!< GPDMA1 Channel 2 interrupt */ + GPDMA1_Channel3_IRQn = 42, /*!< GPDMA1 Channel 3 interrupt */ + GPDMA1_Channel4_IRQn = 43, /*!< GPDMA1 Channel 4 interrupt */ + GPDMA1_Channel5_IRQn = 44, /*!< GPDMA1 Channel 5 interrupt */ + GPDMA1_Channel6_IRQn = 45, /*!< GPDMA1 Channel 6 interrupt */ + GPDMA1_Channel7_IRQn = 46, /*!< GPDMA1 Channel 7 interrupt */ + TIM1_BRK_IRQn = 47, /*!< TIM1 Break interrupt */ + TIM1_UP_IRQn = 48, /*!< TIM1 Update interrupt */ + TIM1_TRG_COM_IRQn = 49, /*!< TIM1 Trigger and Commutation interrupt */ + TIM1_CC_IRQn = 50, /*!< TIM1 Capture Compare interrupt */ + TIM2_IRQn = 51, /*!< TIM2 global interrupt */ + TIM3_IRQn = 52, /*!< TIM3 global interrupt */ + TIM4_IRQn = 53, /*!< TIM4 global interrupt */ + TIM5_IRQn = 54, /*!< TIM5 global interrupt */ + TIM6_IRQn = 55, /*!< TIM6 global interrupt */ + TIM7_IRQn = 56, /*!< TIM7 global interrupt */ + TIM9_IRQn = 57, /*!< TIM9 global interrupt */ + SPI1_IRQn = 58, /*!< SPI1 global interrupt */ + SPI2_IRQn = 59, /*!< SPI2 global interrupt */ + SPI3_IRQn = 60, /*!< SPI3 global interrupt */ + SPI4_IRQn = 61, /*!< SPI4 global interrupt */ + SPI5_IRQn = 62, /*!< SPI5 global interrupt */ + SPI6_IRQn = 63, /*!< SPI6 global interrupt */ + HPDMA1_Channel0_IRQn = 64, /*!< HPDMA1 Channel 0 global interrupt */ + HPDMA1_Channel1_IRQn = 65, /*!< HPDMA1 Channel 1 global interrupt */ + HPDMA1_Channel2_IRQn = 66, /*!< HPDMA1 Channel 2 global interrupt */ + HPDMA1_Channel3_IRQn = 67, /*!< HPDMA1 Channel 3 global interrupt */ + HPDMA1_Channel4_IRQn = 68, /*!< HPDMA1 Channel 4 global interrupt */ + HPDMA1_Channel5_IRQn = 69, /*!< HPDMA1 Channel 5 global interrupt */ + HPDMA1_Channel6_IRQn = 70, /*!< HPDMA1 Channel 6 global interrupt */ + HPDMA1_Channel7_IRQn = 71, /*!< HPDMA1 Channel 7 global interrupt */ + SAI1_A_IRQn = 72, /*!< Serial Audio Interface 1 block A interrupt */ + SAI1_B_IRQn = 73, /*!< Serial Audio Interface 1 block B interrupt */ + SAI2_A_IRQn = 74, /*!< Serial Audio Interface 2 block A interrupt */ + SAI2_B_IRQn = 75, /*!< Serial Audio Interface 2 block B interrupt */ + I2C1_EV_IRQn = 76, /*!< I2C1 event interrupt */ + I2C1_ER_IRQn = 77, /*!< I2C1 error interrupt */ + I2C2_EV_IRQn = 78, /*!< I2C2 event interrupt */ + I2C2_ER_IRQn = 79, /*!< I2C2 error interrupt */ + I2C3_EV_IRQn = 80, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 81, /*!< I2C3 error interrupt */ + USART1_IRQn = 82, /*!< USART1 global interrupt */ + USART2_IRQn = 83, /*!< USART2 global interrupt */ + USART3_IRQn = 84, /*!< USART3 global interrupt */ + UART4_IRQn = 85, /*!< UART4 global interrupt */ + UART5_IRQn = 86, /*!< UART5 global interrupt */ + UART7_IRQn = 87, /*!< UART7 global interrupt */ + UART8_IRQn = 88, /*!< UART8 global interrupt */ + I3C1_EV_IRQn = 89, /*!< I3C1 event interrupt */ + I3C1_ER_IRQn = 90, /*!< I3C1 error interrupt */ + OTG_HS_IRQn = 91, /*!< USB OTG HS interrupt */ + ETH_IRQn = 92, /*!< Ethernet global interrupt */ + CORDIC_IRQn = 93, /*!< CORDIC global interrupt */ + GFXTIM_IRQn = 94, /*!< GFXTIM global interrupt */ + DCMIPP_IRQn = 95, /*!< DCMIPP global interrupt */ + DMA2D_IRQn = 98, /*!< DMA2D global interrupt */ + JPEG_IRQn = 99, /*!< JPEG global interrupt */ + GFXMMU_IRQn = 100, /*!< GFXMMU global interrupt */ + I3C1_WKUP_IRQn = 101, /*!< I3C1 wakeup global interrupt */ + XSPI1_IRQn = 105, /*!< XSPI1 global interrupt */ + XSPI2_IRQn = 106, /*!< XSPI2 global interrupt */ + FMC_IRQn = 107, /*!< FMC global interrupt */ + SDMMC1_IRQn = 108, /*!< SDMMC1 global interrupt */ + SDMMC2_IRQn = 109, /*!< SDMMC2 global interrupt */ + OTG_FS_IRQn = 112, /*!< USB OTG FS interrupt */ + TIM12_IRQn = 113, /*!< TIM12 global interrupt */ + TIM13_IRQn = 114, /*!< TIM13 global interrupt */ + TIM14_IRQn = 115, /*!< TIM14 global interrupt */ + TIM15_IRQn = 116, /*!< TIM15 global interrupt */ + TIM16_IRQn = 117, /*!< TIM16 global interrupt */ + TIM17_IRQn = 118, /*!< TIM17 global interrupt */ + LPTIM1_IRQn = 119, /*!< LPTIM1 global interrupt */ + LPTIM2_IRQn = 120, /*!< LPTIM2 global interrupt */ + LPTIM3_IRQn = 121, /*!< LPTIM3 global interrupt */ + LPTIM4_IRQn = 122, /*!< LPTIM4 global interrupt */ + LPTIM5_IRQn = 123, /*!< LPTIM5 global interrupt */ + SPDIF_RX_IRQn = 124, /*!< SPDIF_RX global interrupt */ + MDIOS_IRQn = 125, /*!< MDIOS global interrupt */ + ADF1_FLT0_IRQn = 126, /*!< ADF1 Filter 0 global Interrupt */ + CRS_IRQn = 127, /*!< CRS global interrupt */ + UCPD1_IRQn = 128, /*!< UCPD1 global interrupt */ + CEC_IRQn = 129, /*!< HDMI_CEC global Interrupt */ + PSSI_IRQn = 130, /*!< PSSI global interrupt */ + LPUART1_IRQn = 131, /*!< LPUART1 global interrupt */ + WAKEUP_PIN_IRQn = 132, /*!< Wake-up pins interrupt */ + GPDMA1_Channel8_IRQn = 133, /*!< GPDMA1 Channel 8 global interrupt */ + GPDMA1_Channel9_IRQn = 134, /*!< GPDMA1 Channel 9 global interrupt */ + GPDMA1_Channel10_IRQn = 135, /*!< GPDMA1 Channel 10 global interrupt */ + GPDMA1_Channel11_IRQn = 136, /*!< GPDMA1 Channel 11 global interrupt */ + GPDMA1_Channel12_IRQn = 137, /*!< GPDMA1 Channel 12 global interrupt */ + GPDMA1_Channel13_IRQn = 138, /*!< GPDMA1 Channel 13 global interrupt */ + GPDMA1_Channel14_IRQn = 139, /*!< GPDMA1 Channel 14 global interrupt */ + GPDMA1_Channel15_IRQn = 140, /*!< GPDMA1 Channel 15 global interrupt */ + HPDMA1_Channel8_IRQn = 141, /*!< HPDMA1 Channel 8 global interrupt */ + HPDMA1_Channel9_IRQn = 142, /*!< HPDMA1 Channel 9 global interrupt */ + HPDMA1_Channel10_IRQn = 143, /*!< HPDMA1 Channel 10 global interrupt */ + HPDMA1_Channel11_IRQn = 144, /*!< HPDMA1 Channel 11 global interrupt */ + HPDMA1_Channel12_IRQn = 145, /*!< HPDMA1 Channel 12 global interrupt */ + HPDMA1_Channel13_IRQn = 146, /*!< HPDMA1 Channel 13 global interrupt */ + HPDMA1_Channel14_IRQn = 147, /*!< HPDMA1 Channel 14 global interrupt */ + HPDMA1_Channel15_IRQn = 148, /*!< HPDMA1 Channel 15 global interrupt */ + FDCAN1_IT0_IRQn = 152, /*!< FDCAN1 interrupt 0 */ + FDCAN1_IT1_IRQn = 153, /*!< FDCAN1 interrupt 1 */ + FDCAN2_IT0_IRQn = 154, /*!< FDCAN2 interrupt 0 */ + FDCAN2_IT1_IRQn = 155 /*!< FDCAN2 interrupt 1 */ +} IRQn_Type; + + +/* =========================================================================================================================== */ +/* ================ Processor and Core Peripheral Section ================ */ +/* =========================================================================================================================== */ + +/** + * @brief Configuration of the Cortex-M7 Processor and Core Peripherals + */ +#define __CM7_REV 0x0102U /*!< Cortex-M7 revision r1p2 */ +#define __MPU_PRESENT 1U /*!< CM7 provides an MPU */ +#define __MPU_REGIONCOUNT 16U /*!< CM7 provides MPU region number */ +#define __NVIC_PRIO_BITS 4U /*!< CM7 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +#define __ICACHE_PRESENT 1U /*!< CM7 instruction cache present */ +#define __DCACHE_PRESENT 1U /*!< CM7 data cache present */ + +/** @} */ /* End of group Configuration_of_CMSIS */ + + +#include /*!< ARM Cortex-M7 processor and core peripherals */ +#include "system_stm32h7rsxx.h" /*!< STM32H7RSxx System */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_peripherals + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + uint32_t RESERVED10[4];/*!< Reserved, 0x0B8 - 0x0BC */ + __IO uint32_t OR; /*!< ADC option register, Address offset: 0xC8 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: 0x300 + 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x300 + 0x04 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: 0x300 + 0x08 */ + __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: 0x300 + 0x0C */ +} ADC_Common_TypeDef; + +/** + * @brief AXIM ASIB + */ +typedef struct +{ + uint32_t RESERVED1[9]; /*!< Reserved, Address offset: 0x00-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM ASIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[54]; /*!< Reserved, Address offset: 0x28-0xFC */ + __IO uint32_t READQOS; /*!< AXIM ASIB read_qos register Address offset: 0x100 */ + __IO uint32_t WRITEQOS; /*!< AXIM ASIB write_qos register Address offset: 0x104 */ + __IO uint32_t FNMOD; /*!< AXIM ASIB fn_mod register Address offset: 0x108 */ +} AXIM_ASIB_TypeDef; + +typedef struct +{ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x00-0x04 */ + __IO uint32_t FNMODBMISS; /*!< AXIM AMIB fn_mod_bm_iss register Address offset: 0x08 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x0C-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM AMIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[1]; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t FNMODLB; /*!< AXIM AMIB fn_mod_lb register Address offset: 0x2C */ + uint32_t RESERVED5[54]; /*!< Reserved, Address offset: 0x30-0x104 */ + __IO uint32_t FNMOD; /*!< AXIM AMIB fn_mod register Address offset: 0x108 */ +} AXIM_AMIB_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +} CEC_TypeDef; + +/** + * @brief CORDIC + */ +typedef struct +{ + __IO uint32_t CSR; /*!< CORDIC Control and Status register, Address offset: 0x00 */ + __IO uint32_t WDATA; /*!< CORDIC argument register, Address offset: 0x04 */ + __IO uint32_t RDATA; /*!< CORDIC result register, Address offset: 0x08 */ +} CORDIC_TypeDef; + +/** + * @brief GFXTIM + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXTIM configuration register, Address offset: 0x00 */ + __IO uint32_t CGCR; /*!< GFXTIM clock generator configuration register, Address offset: 0x04 */ + __IO uint32_t TCR; /*!< GFXTIM timers configuration register, Address offset: 0x08 */ + __IO uint32_t TDR; /*!< GFXTIM timers disable register, Address offset: 0x0C */ + __IO uint32_t EVCR; /*!< GFXTIM events control register, Address offset: 0x10 */ + __IO uint32_t EVSR; /*!< GFXTIM events selection register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t WDGTCR; /*!< GFXTIM watchdog timer configuration register, Address offset: 0x20 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t ISR; /*!< GFXTIM interrupt status register, Address offset: 0x30 */ + __IO uint32_t ICR; /*!< GFXTIM interrupt clear register, Address offset: 0x34 */ + __IO uint32_t IER; /*!< GFXTIM interrupt enable register, Address offset: 0x38 */ + __IO uint32_t TSR; /*!< GFXTIM timers status register, Address offset: 0x3C */ + __IO uint32_t LCCRR; /*!< GFXTIM line clock counter reload register, Address offset: 0x40 */ + __IO uint32_t FCCRR; /*!< GFXTIM frame clock counter reload register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x48-0x4C */ + __IO uint32_t ATR; /*!< GFXTIM absolute time register, Address offset: 0x50 */ + __IO uint32_t AFCR; /*!< GFXTIM absolute frame counter register, Address offset: 0x54 */ + __IO uint32_t ALCR; /*!< GFXTIM absolute line counter register, Address offset: 0x58 */ + uint32_t RESERVED4[1]; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t AFCC1R; /*!< GFXTIM absolute frame counter compare 1 register, Address offset: 0x60 */ + uint32_t RESERVED5[3]; /*!< Reserved, Address offset: 0x64-0X6C */ + __IO uint32_t ALCC1R; /*!< GFXTIM absolute line counter compare 1 register, Address offset: 0x70 */ + __IO uint32_t ALCC2R; /*!< GFXTIM absolute line counter compare 2 register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, Address offset: 0x78-0X7C */ + __IO uint32_t RFC1R; /*!< GFXTIM relative frame counter 1 register, Address offset: 0x80 */ + __IO uint32_t RFC1RR; /*!< GFXTIM relative frame counter 1 reload register, Address offset: 0x84 */ + __IO uint32_t RFC2R; /*!< GFXTIM relative frame counter 2 register, Address offset: 0x88 */ + __IO uint32_t RFC2RR; /*!< GFXTIM relative frame counter 2 reload register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x90-0X9C */ + __IO uint32_t WDGCR; /*!< GFXTIM watchdog counter register, Address offset: 0xA0 */ + __IO uint32_t WDGRR; /*!< GFXTIM watchdog reload register, Address offset: 0xA4 */ + __IO uint32_t WDGPAR; /*!< GFXTIM watchdog pre-alarm register, Address offset: 0xA8 */ + uint32_t RESERVED8[209]; /*!< Reserved, Address offset: 0xAC-0X3EC */ + __IO uint32_t HWCFGR; /*!< GFXTIM HW configuration register, Address offset: 0x3F0 */ + __IO uint32_t VERR; /*!< GFXTIM version register, Address offset: 0x3F4 */ + __IO uint32_t IPIDR; /*!< GFXTIM identification register, Address offset: 0x3F8 */ + __IO uint32_t SIDR; /*!< GFXTIM size identification register, Address offset: 0x3FC */ +} GFXTIM_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[5]; /*!< Reserved, Address offset: 0x08-0x18 */ + __IO uint32_t AHB5FZR; /*!< Debug MCU AHB5FZR freeze register, Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t AHB1FZR; /*!< Debug MCU AHB1FZR freeze register, Address offset: 0x24 */ + uint32_t RESERVED3[5]; /*!< Reserved, Address offset: 0x28-0x38 */ + __IO uint32_t APB1FZR; /*!< Debug MCU APB1FZR freeze register, Address offset: 0x3C */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x40-0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU APB2FZR freeze register, Address offset: 0x4C */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t APB4FZR; /*!< Debug MCU APB4FZR freeze register, Address offset: 0x54 */ + uint32_t RESERVED6[41]; /*!< Reserved, Address offset: 0x58-0xF8 */ + __IO uint32_t SR; /*!< Debug MCU status register, Address offset: 0xFC */ + __IO uint32_t DBG_AUTH_HOST; /*!< Debug MCU Authentication Host register, Address offset: 0x100 */ + __IO uint32_t DBG_AUTH_DEV; /*!< Debug MCU Authentication Device register, Address offset: 0x104 */ + __IO uint32_t DBG_AUTH_ACK; /*!< Debug MCU Authentication Ack register, Address offset: 0x108 */ + uint32_t RESERVED7[945]; /*!< Reserved, Address offset: 0x10C-0xFCC */ + __IO uint32_t PIDR4; /*!< Debug MCU peripheral identity register 4, Address offset: 0xFD0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xFD4-0xFDC */ + __IO uint32_t PIDR0; /*!< Debug MCU peripheral identity register 0, Address offset: 0xFE0 */ + __IO uint32_t PIDR1; /*!< Debug MCU peripheral identity register 1, Address offset: 0xFE4 */ + __IO uint32_t PIDR2; /*!< Debug MCU peripheral identity register 2, Address offset: 0xFE8 */ + __IO uint32_t PIDR3; /*!< Debug MCU peripheral identity register 3, Address offset: 0xFEC */ + __IO uint32_t CIDR0; /*!< Debug MCU component identity register 0, Address offset: 0xFF0 */ + __IO uint32_t CIDR1; /*!< Debug MCU component identity register 1, Address offset: 0xFF4 */ + __IO uint32_t CIDR2; /*!< Debug MCU component identity register 2, Address offset: 0xFF8 */ + __IO uint32_t CIDR3; /*!< Debug MCU component identity register 3, Address offset: 0xFFC */ +} DBGMCU_TypeDef; + +/** + * @brief DCMIPP + */ +typedef struct +{ + __IO uint32_t IPGR1; /*!< IP-Plug global register 1 Address offset: 0x00 */ + __IO uint32_t IPGR2; /*!< IP-Plug global register 2 Address offset: 0x04 */ + __IO uint32_t IPGR3; /*!< IP-Plug global register 3 Address offset: 0x08 */ + uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x0C-0x18 */ + __IO uint32_t IPGR8; /*!< IP-Plug global register 8 Address offset: 0x1C */ + __IO uint32_t IPC1R1; /*!< IP-Plug client 1 register 1 Address offset: 0x20 */ + __IO uint32_t IPC1R2; /*!< IP-Plug client 1 register 2 Address offset: 0x24 */ + __IO uint32_t IPC1R3; /*!< IP-Plug client 1 register 3 Address offset: 0x28 */ + __IO uint32_t RESERVED2[54]; /*!< Reserved, Address offset: 0x2C-0x100 */ + __IO uint32_t PRCR; /*!< Parallel interface control register Address offset: 0x104 */ + __IO uint32_t PRESCR; /*!< Parallel interface embedded sync code register Address offset: 0x108 */ + __IO uint32_t PRESUR; /*!< Parallel interface embedded sync unmask register Address offset: 0x10C */ + __IO uint32_t RESERVED3[57]; /*!< Reserved, Address offset: 0x110-0x1F0 */ + __IO uint32_t PRIER; /*!< Parallel interface interrupt enable register Address offset: 0x1F4 */ + __IO uint32_t PRSR; /*!< Parallel interface status register Address offset: 0x1F8 */ + __IO uint32_t PRFCR; /*!< Parallel interface interrupt clear register Address offset: 0x1FC */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x200 */ + __IO uint32_t CMCR; /*!< Common configuration register Address offset: 0x204 */ + __IO uint32_t CMFRCR; /*!< Common frame counter register Address offset: 0x208 */ + __IO uint32_t RESERVED5[121]; /*!< Reserved, Address offset: 0x20C-0x3EC */ + __IO uint32_t CMIER; /*!< Common interrupt enable register Address offset: 0x3F0 */ + __IO uint32_t CMSR1; /*!< Common status register 1 Address offset: 0x3F4 */ + __IO uint32_t CMSR2; /*!< Common status register 2 Address offset: 0x3F8 */ + __IO uint32_t CMFCR; /*!< Common interrupt clear register Address offset: 0x3FC */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x400 */ + __IO uint32_t P0FSCR; /*!< Pipe0 flow selection configuration register Address offset: 0x404 */ + __IO uint32_t RESERVED7[62]; /*!< Reserved, Address offset: 0x408-0x4FC */ + __IO uint32_t P0FCTCR; /*!< Pipe0 flow control configuration register Address offset: 0x500 */ + __IO uint32_t P0SCSTR; /*!< Pipe0 stat/crop start register Address offset: 0x504 */ + __IO uint32_t P0SCSZR; /*!< Pipe0 stat/crop size register Address offset: 0x508 */ + __IO uint32_t RESERVED8[41]; /*!< Reserved, Address offset: 0x50C-0x5AC */ + __IO uint32_t P0DCCNTR; /*!< Pipe0 dump counter register Address offset: 0x5B0 */ + __IO uint32_t P0DCLMTR; /*!< Pipe0 dump limit register Address offset: 0x5B4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x5B8-0x5BC */ + __IO uint32_t P0PPCR; /*!< Pipe0 pixel packer configuration register Address offset: 0x5C0 */ + __IO uint32_t P0PPM0AR1; /*!< Pipe0 pixel packer memory0 address register 1 Address offset: 0x5C4 */ + __IO uint32_t P0PPM0AR2; /*!< Pipe0 pixel packer memory0 address register 2 Address offset: 0x5C8 */ + __IO uint32_t RESERVED10[10]; /*!< Reserved, Address offset: 0x5CC-0x5F0 */ + __IO uint32_t P0IER; /*!< Pipe0 interrupt enable register Address offset: 0x5F4 */ + __IO uint32_t P0SR; /*!< Pipe0 status register Address offset: 0x5F8 */ + __IO uint32_t P0FCR; /*!< Pipe0 interrupt clear register Address offset: 0x5FC */ + __IO uint32_t RESERVED11[64]; /*!< Reserved, Address offset: 0x600-0x6FC */ + __IO uint32_t P0CFCTCR; /*!< Pipe0 current flow control configuration register Address offset: 0x700 */ + __IO uint32_t P0CSCSTR; /*!< Pipe0 current stat/crop start register Address offset: 0x704 */ + __IO uint32_t P0CSCSZR; /*!< Pipe0 current stat/crop size register Address offset: 0x708 */ + __IO uint32_t RESERVED12[45]; /*!< Reserved, Address offset: 0x70C-0x7BC */ + __IO uint32_t P0CPPCR; /*!< Pipe0 current pixel packer configuration register Address offset: 0x700 */ + __IO uint32_t P0CPPM0AR1; /*!< Pipe0 current pixel packer memory0 address register 1 Address offset: 0x7C4 */ + __IO uint32_t P0CPPM0AR2; /*!< Pipe0 current pixel packer memory0 address register 2 Address offset: 0x7C8 */ +} DCMIPP_TypeDef; + +/** + * @ brief Delay Block + */ +typedef struct +{ + __IO uint32_t CR; /*!< Delay Block Control Register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< Delay Block Configuration Register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved 1, Address offset: 0x00 */ + __IO uint32_t PRIVCFGR; /*!< DMA privileged configuration register, Address offset: 0x04 */ + __IO uint32_t RCFGLOCKR; /*!< DMA configuration lock register, Address offset: 0x08 */ + __IO uint32_t MISR; /*!< DMA masked interrupt status register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CLBAR; /*!< DMA channel x linked-list base address register, Address offset: 0x50 + (x * 0x80) */ + uint32_t RESERVED1[2]; /*!< Reserved 1, Address offset: 0x54 -- 0x58 */ + __IO uint32_t CFCR; /*!< DMA channel x flag clear register, Address offset: 0x5C + (x * 0x80) */ + __IO uint32_t CSR; /*!< DMA channel x flag status register, Address offset: 0x60 + (x * 0x80) */ + __IO uint32_t CCR; /*!< DMA channel x control register, Address offset: 0x64 + (x * 0x80) */ + uint32_t RESERVED2[10]; /*!< Reserved 2, Address offset: 0x68 -- 0x8C */ + __IO uint32_t CTR1; /*!< DMA channel x transfer register 1, Address offset: 0x90 + (x * 0x80) */ + __IO uint32_t CTR2; /*!< DMA channel x transfer register 2, Address offset: 0x94 + (x * 0x80) */ + __IO uint32_t CBR1; /*!< DMA channel x block register 1, Address offset: 0x98 + (x * 0x80) */ + __IO uint32_t CSAR; /*!< DMA channel x source address register, Address offset: 0x9C + (x * 0x80) */ + __IO uint32_t CDAR; /*!< DMA channel x destination address register, Address offset: 0xA0 + (x * 0x80) */ + __IO uint32_t CTR3; /*!< DMA channel x transfer register 3, Address offset: 0xA4 + (x * 0x80) */ + __IO uint32_t CBR2; /*!< DMA channel x block register 2, Address offset: 0xA8 + (x * 0x80) */ + uint32_t RESERVED3[8]; /*!< Reserved 3, Address offset: 0xAC -- 0xC8 */ + __IO uint32_t CLLR; /*!< DMA channel x linked-list address register, Address offset: 0xCC + (x * 0x80) */ +} DMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ +} DMA2D_TypeDef; + +/** + * @brief DTS + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< DTS configuration register, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t T0VALR1; /*!< DTS T0 Value register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x0C */ + __IO uint32_t RAMPVALR; /*!< DTS Ramp value register, Address offset: 0x10 */ + __IO uint32_t ITR1; /*!< DTS Interrupt threshold register, Address offset: 0x14 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t DR; /*!< DTS data register, Address offset: 0x1C */ + __IO uint32_t SR; /*!< DTS status register Address offset: 0x20 */ + __IO uint32_t ITENR; /*!< DTS Interrupt enable register, Address offset: 0x24 */ + __IO uint32_t ICIFR; /*!< DTS Clear Interrupt flag register, Address offset: 0x28 */ + __IO uint32_t OR; /*!< DTS option register 1, Address offset: 0x2C */ +} DTS_TypeDef; + +/** + * @brief Ethernet MAC + */ +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACECR; + __IO uint32_t MACPFR; + __IO uint32_t MACWTR; + __IO uint32_t MACHT0R; + __IO uint32_t MACHT1R; + uint32_t RESERVED1[14]; + __IO uint32_t MACVTR; + uint32_t RESERVED2; + __IO uint32_t MACVHTR; + uint32_t RESERVED3; + __IO uint32_t MACVIR; + __IO uint32_t MACIVIR; + uint32_t RESERVED4[2]; + __IO uint32_t MACTFCR; + uint32_t RESERVED5[7]; + __IO uint32_t MACRFCR; + uint32_t RESERVED6[7]; + __IO uint32_t MACISR; + __IO uint32_t MACIER; + __IO uint32_t MACRXTXSR; + uint32_t RESERVED7; + __IO uint32_t MACPCSR; + __IO uint32_t MACRWKPFR; + uint32_t RESERVED8[2]; + __IO uint32_t MACLCSR; + __IO uint32_t MACLTCR; + __IO uint32_t MACLETR; + __IO uint32_t MAC1USTCR; + uint32_t RESERVED9[12]; + __IO uint32_t MACVR; + __IO uint32_t MACDR; + uint32_t RESERVED10; + __IO uint32_t MACHWF0R; + __IO uint32_t MACHWF1R; + __IO uint32_t MACHWF2R; + uint32_t RESERVED11[54]; + __IO uint32_t MACMDIOAR; + __IO uint32_t MACMDIODR; + uint32_t RESERVED12[2]; + __IO uint32_t MACARPAR; + uint32_t RESERVED13[59]; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; + uint32_t RESERVED14[248]; + __IO uint32_t MMCCR; + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; + uint32_t RESERVED15[14]; + __IO uint32_t MMCTSCGPR; + __IO uint32_t MMCTMCGPR; + uint32_t RESERVED16[5]; + __IO uint32_t MMCTPCGR; + uint32_t RESERVED17[10]; + __IO uint32_t MMCRCRCEPR; + __IO uint32_t MMCRAEPR; + uint32_t RESERVED18[10]; + __IO uint32_t MMCRUPGR; + uint32_t RESERVED19[9]; + __IO uint32_t MMCTLPIMSTR; + __IO uint32_t MMCTLPITCR; + __IO uint32_t MMCRLPIMSTR; + __IO uint32_t MMCRLPITCR; + uint32_t RESERVED20[65]; + __IO uint32_t MACL3L4C0R; + __IO uint32_t MACL4A0R; + uint32_t RESERVED21[2]; + __IO uint32_t MACL3A0R0R; + __IO uint32_t MACL3A1R0R; + __IO uint32_t MACL3A2R0R; + __IO uint32_t MACL3A3R0R; + uint32_t RESERVED22[4]; + __IO uint32_t MACL3L4C1R; + __IO uint32_t MACL4A1R; + uint32_t RESERVED23[2]; + __IO uint32_t MACL3A0R1R; + __IO uint32_t MACL3A1R1R; + __IO uint32_t MACL3A2R1R; + __IO uint32_t MACL3A3R1R; + uint32_t RESERVED24[108]; + __IO uint32_t MACTSCR; + __IO uint32_t MACSSIR; + __IO uint32_t MACSTSR; + __IO uint32_t MACSTNR; + __IO uint32_t MACSTSUR; + __IO uint32_t MACSTNUR; + __IO uint32_t MACTSAR; + uint32_t RESERVED25; + __IO uint32_t MACTSSR; + uint32_t RESERVED26[3]; + __IO uint32_t MACTTSSNR; + __IO uint32_t MACTTSSSR; + uint32_t RESERVED27[2]; + __IO uint32_t MACACR; + uint32_t RESERVED28; + __IO uint32_t MACATSNR; + __IO uint32_t MACATSSR; + __IO uint32_t MACTSIACR; + __IO uint32_t MACTSEACR; + __IO uint32_t MACTSICNR; + __IO uint32_t MACTSECNR; + uint32_t RESERVED29[4]; + __IO uint32_t MACPPSCR; + uint32_t RESERVED30[3]; + __IO uint32_t MACPPSTTSR; + __IO uint32_t MACPPSTTNR; + __IO uint32_t MACPPSIR; + __IO uint32_t MACPPSWR; + uint32_t RESERVED31[12]; + __IO uint32_t MACPOCR; + __IO uint32_t MACSPI0R; + __IO uint32_t MACSPI1R; + __IO uint32_t MACSPI2R; + __IO uint32_t MACLMIR; + uint32_t RESERVED32[11]; + __IO uint32_t MTLOMR; + uint32_t RESERVED33[7]; + __IO uint32_t MTLISR; + uint32_t RESERVED34[55]; + __IO uint32_t MTLTQOMR; + __IO uint32_t MTLTQUR; + __IO uint32_t MTLTQDR; + uint32_t RESERVED35[8]; + __IO uint32_t MTLQICSR; + __IO uint32_t MTLRQOMR; + __IO uint32_t MTLRQMPOCR; + __IO uint32_t MTLRQDR; + uint32_t RESERVED36[177]; + __IO uint32_t DMAMR; + __IO uint32_t DMASBMR; + __IO uint32_t DMAISR; + __IO uint32_t DMADSR; + uint32_t RESERVED37[60]; + __IO uint32_t DMACCR; + __IO uint32_t DMACTCR; + __IO uint32_t DMACRCR; + uint32_t RESERVED38[2]; + __IO uint32_t DMACTDLAR; + uint32_t RESERVED39; + __IO uint32_t DMACRDLAR; + __IO uint32_t DMACTDTPR; + uint32_t RESERVED40; + __IO uint32_t DMACRDTPR; + __IO uint32_t DMACTDRLR; + __IO uint32_t DMACRDRLR; + __IO uint32_t DMACIER; + __IO uint32_t DMACRIWTR; +__IO uint32_t DMACSFCSR; + uint32_t RESERVED41; + __IO uint32_t DMACCATDR; + uint32_t RESERVED42; + __IO uint32_t DMACCARDR; + uint32_t RESERVED43; + __IO uint32_t DMACCATBR; + uint32_t RESERVED44; + __IO uint32_t DMACCARBR; + __IO uint32_t DMACSR; +uint32_t RESERVED45[2]; +__IO uint32_t DMACMFCR; +}ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x08 */ + uint32_t RESERVED1[5]; /*!< Reserved 1, Address offset: 0x0C-0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x28 */ + uint32_t RESERVED2[21]; /*!< Reserved 2, Address offset: 0x2C-0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x84 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x88 */ + uint32_t RESERVED3; /*!< Reserved 3, Address offset: 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x94 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x98 */ + uint32_t RESERVED4; /*!< Reserved 4, Address offset: 0x9C */ + __IO uint32_t IMR3; /*!< EXTI Interrupt mask register 3, Address offset: 0xA0 */ + __IO uint32_t EMR3; /*!< EXTI Event mask register 3, Address offset: 0xA4 */ +} EXTI_TypeDef; + +/** + * @brief FD Controller Area Network + */ +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ + uint32_t RESERVED1[128];/*!< Reserved, 0x100 + 0x004 - 0x100 + 0x200 */ + __IO uint32_t OPTR; /*!< FDCAN option register, Address offset: 0x100 + 0x204 */ + uint32_t RESERVED2[58]; /*!< Reserved, 0x100 + 0x208 - 0x100 + 0x2EC */ + __IO uint32_t HWCFG; /*!< FDCAN hardware configuration register, Address offset: 0x100 + 0x2F0 */ + __IO uint32_t VERR; /*!< FDCAN IP version register, Address offset: 0x100 + 0x2F4 */ + __IO uint32_t IPIDR; /*!< FDCAN IP ID register, Address offset: 0x100 + 0x2F8 */ + __IO uint32_t SIDR; /*!< FDCAN size ID register, Address offset: 0x100 + 0x2FC */ +} FDCAN_Config_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x000 */ + __IO uint32_t KEYR; /*!< FLASH control key register, Address offset: 0x004 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x008 - 0x00C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x010 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t IER; /*!< FLASH interrupt enable register, Address offset: 0x020 */ + __IO uint32_t ISR; /*!< FLASH interrupt status register, Address offset: 0x024 */ + __IO uint32_t ICR; /*!< FLASH interrupt clear register, Address offset: 0x028 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x02C */ + __IO uint32_t CRCCR; /*!< FLASH CRC control register, Address offset: 0x030 */ + __IO uint32_t CRCSADDR; /*!< FLASH CRC start address register, Address offset: 0x034 */ + __IO uint32_t CRCEADDR; /*!< FLASH CRC end address register, Address offset: 0x038 */ + __IO uint32_t CRCDATAR; /*!< FLASH CRC data register, Address offset: 0x03C */ + __IO uint32_t ECCSFADDR; /*!< FLASH ECC single fail address register, Address offset: 0x040 */ + __IO uint32_t ECCDFADDR; /*!< FLASH ECC double fail address register, Address offset: 0x044 */ + uint32_t RESERVED4[46]; /*!< Reserved, Address offset: 0x048 - 0x0FC */ + __IO uint32_t OPTKEYR; /*!< FLASH options key register, Address offset: 0x100 */ + __IO uint32_t OPTCR; /*!< FLASH options control register, Address offset: 0x104 */ + __IO uint32_t OPTISR; /*!< FLASH options interrupt status register, Address offset: 0x108 */ + __IO uint32_t OPTICR; /*!< FLASH options interrupt clear register, Address offset: 0x10C */ + __IO uint32_t OBKCR; /*!< FLASH option byte key control register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x114 */ + __IO uint32_t OBKDR[8]; /*!< FLASH option bytes key data register, Address offset: 0x118 - 0x134 */ + uint32_t RESERVED6[50]; /*!< Reserved, Address offset: 0x138 - 0x1FC */ + __IO uint32_t NVSR; /*!< FLASH non-volatile status register, Address offset: 0x200 */ + __IO uint32_t NVSRP; /*!< FLASH security status register programming, Address offset: 0x204 */ + __IO uint32_t ROTSR; /*!< FLASH RoT status register, Address offset: 0x208 */ + __IO uint32_t ROTSRP; /*!< FLASH RoT status register programming, Address offset: 0x20C */ + __IO uint32_t OTPLSR; /*!< FLASH OTP lock status register, Address offset: 0x210 */ + __IO uint32_t OTPLSRP; /*!< FLASH OTP lock status programming register, Address offset: 0x214 */ + __IO uint32_t WRPSR; /*!< FLASH write protection status register, Address offset: 0x218 */ + __IO uint32_t WRPSRP; /*!< FLASH write protection status register programming, Address offset: 0x21C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x220 - 0x22C */ + __IO uint32_t HDPSR; /*!< FLASH hide protection status register, Address offset: 0x230 */ + __IO uint32_t HDPSRP; /*!< FLASH hide protection status register programming, Address offset: 0x234 */ + uint32_t RESERVED8[6]; /*!< Reserved, Address offset: 0x238 - 0x24C */ + __IO uint32_t EPOCHSR; /*!< FLASH epoch status register, Address offset: 0x250 */ + __IO uint32_t EPOCHSRP; /*!< FLASH epoch status register programming, Address offset: 0x254 */ + uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x258 - 0x25C */ + __IO uint32_t OBW1SR; /*!< FLASH option byte word 1 status register, Address offset: 0x260 */ + __IO uint32_t OBW1SRP; /*!< FLASH option byte word 1 status register programming, Address offset: 0x264 */ + __IO uint32_t OBW2SR; /*!< FLASH option byte word 2 status register, Address offset: 0x268 */ + __IO uint32_t OBW2SRP; /*!< FLASH option byte word 2 status register programming, Address offset: 0x26C */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 + */ +typedef struct { + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 Extended + */ +typedef struct { + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ +typedef struct { + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 & 6 + */ +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140 - 0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148 - 0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief GFXMMU + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXMMU configuration register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< GFXMMU status register, Address offset: 0x04 */ + __IO uint32_t FCR; /*!< GFXMMU flag clear register, Address offset: 0x08 */ + uint32_t RESERVED0; /*!< Reserved0, Address offset: 0x0C */ + __IO uint32_t DVR; /*!< GFXMMU default value register, Address offset: 0x10 */ + __IO uint32_t DAR; /*!< GFXMMU default alpha register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved1, Address offset: 0x18 to 0x1C */ + __IO uint32_t B0CR; /*!< GFXMMU buffer 0 configuration register, Address offset: 0x20 */ + __IO uint32_t B1CR; /*!< GFXMMU buffer 1 configuration register, Address offset: 0x24 */ + __IO uint32_t B2CR; /*!< GFXMMU buffer 2 configuration register, Address offset: 0x28 */ + __IO uint32_t B3CR; /*!< GFXMMU buffer 3 configuration register, Address offset: 0x2C */ + uint32_t RESERVED2[1012]; /*!< Reserved2, Address offset: 0x30 to 0xFFC */ + __IO uint32_t LUT[2048]; /*!< GFXMMU LUT registers, Address offset: 0x1000 to 0x2FFC + For LUT line i, LUTiL = LUT[2*i] and LUTiH = LUT[(2*i)+1] */ +} GFXMMU_TypeDef; + +/** + * @brief HASH + */ +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[103]; /*!< HASH context swap registers, Address offset: 0x0F8-0x290 */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ +typedef struct +{ + __IO uint32_t HR[16]; /*!< HASH digest registers, Address offset: 0x310-0x34C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Improved Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< I3C Control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< I3C Controller Configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x08-0x0C */ + __IO uint32_t RDR; /*!< I3C Received Data register, Address offset: 0x10 */ + __IO uint32_t RDWR; /*!< I3C Received Data Word register, Address offset: 0x14 */ + __IO uint32_t TDR; /*!< I3C Transmit Data register, Address offset: 0x18 */ + __IO uint32_t TDWR; /*!< I3C Transmit Data Word register, Address offset: 0x1C */ + __IO uint32_t IBIDR; /*!< I3C IBI payload Data register, Address offset: 0x20 */ + __IO uint32_t TGTTDR; /*!< I3C Target Transmit register, Address offset: 0x24 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x28-0x2C */ + __IO uint32_t SR; /*!< I3C Status register, Address offset: 0x30 */ + __IO uint32_t SER; /*!< I3C Status Error register, Address offset: 0x34 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t RMR; /*!< I3C Received Message register, Address offset: 0x40 */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x44-0x4C */ + __IO uint32_t EVR; /*!< I3C Event register, Address offset: 0x50 */ + __IO uint32_t IER; /*!< I3C Interrupt Enable register, Address offset: 0x54 */ + __IO uint32_t CEVR; /*!< I3C Clear Event register, Address offset: 0x58 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t DEVR0; /*!< I3C own Target characteristics register, Address offset: 0x60 */ + __IO uint32_t DEVRX[4]; /*!< I3C Target x (1<=x<=4) register, Address offset: 0x64-0x70 */ + uint32_t RESERVED6[7]; /*!< Reserved, Address offset: 0x74-0x8C */ + __IO uint32_t MAXRLR; /*!< I3C Maximum Read Length register, Address offset: 0x90 */ + __IO uint32_t MAXWLR; /*!< I3C Maximum Write Length register, Address offset: 0x94 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0x98-0x9C */ + __IO uint32_t TIMINGR0; /*!< I3C Timing 0 register, Address offset: 0xA0 */ + __IO uint32_t TIMINGR1; /*!< I3C Timing 1 register, Address offset: 0xA4 */ + __IO uint32_t TIMINGR2; /*!< I3C Timing 2 register, Address offset: 0xA8 */ + uint32_t RESERVED9[5]; /*!< Reserved, Address offset: 0xAC-0xBC */ + __IO uint32_t BCR; /*!< I3C Bus Characteristics register, Address offset: 0xC0 */ + __IO uint32_t DCR; /*!< I3C Device Characteristics register, Address offset: 0xC4 */ + __IO uint32_t GETCAPR; /*!< I3C GET CAPabilities register, Address offset: 0xC8 */ + __IO uint32_t CRCAPR; /*!< I3C Controller CAPabilities register, Address offset: 0xCC */ + __IO uint32_t GETMXDSR; /*!< I3C GET Max Data Speed register, Address offset: 0xD0 */ + __IO uint32_t EPIDR; /*!< I3C Extended Provisioned ID register, Address offset: 0xD4 */ +} I3C_TypeDef; + + +/** + * @brief IWDG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ + __IO uint32_t EWCR; /*!< IWDG Early Wakeup register, Address offset: 0x14 */ +} IWDG_TypeDef; + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 0x00 */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 0x04 */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 0x08 */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0x0C */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 0x10 */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 0x14 */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 0x18 */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 0x1C */ + uint32_t RESERVED0[4]; /* Reserved Address offset: 0x20-0x2C */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 0x30 */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 0x34 */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 0x38 */ + uint32_t RESERVED1; /* Reserved Address offset: 0x3C */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 0x40 */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 0x44 */ + uint32_t RESERVED2[2]; /* Reserved Address offset: 0x48-0x4C */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 0x50-0x8C */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 0x90-0xCC */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: 0xD0-0x10C */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 0x110-0x14C */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 0x150-0x18C */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 0x190-0x20C */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 0x210-0x35C */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 0x360-0x4F8 */ + uint32_t RESERVED3; /* Reserved Address offset: 0x4FC */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 0x500-0x65C */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 0x660-0x7BC */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 0x7C0-0x7DC */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 0x7E0-0x7FC */ +} JPEG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t DIER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< LPTIM Capture/Compare register 1, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register 2, Address offset: 0x24 */ + __IO uint32_t RCR; /*!< LPTIM Repetition register, Address offset: 0x28 */ + __IO uint32_t CCMR1; /*!< LPTIM Capture/Compare mode register, Address offset: 0x2C */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x30 */ + __IO uint32_t CCR2; /*!< LPTIM Capture/Compare register 2, Address offset: 0x34 */ +} LPTIM_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + +/** + * @brief ADF + */ +typedef struct +{ + __IO uint32_t GCR; /*!< MDF Global Control register, Address offset: 0x00 */ + __IO uint32_t CKGCR; /*!< MDF Clock Generator Control Register, Address offset: 0x04 */ +} MDF_TypeDef; + +/** + * @brief ADF filter + */ +typedef struct +{ + __IO uint32_t SITFCR; /*!< MDF Serial Interface Control Register, Address offset: 0x80 */ + __IO uint32_t BSMXCR; /*!< MDF Bitstream Matrix Control Register, Address offset: 0x84 */ + __IO uint32_t DFLTCR; /*!< MDF Digital Filter Control Register, Address offset: 0x88 */ + __IO uint32_t DFLTCICR; /*!< MDF MCIC Configuration Register, Address offset: 0x8C */ + __IO uint32_t DFLTRSFR; /*!< MDF Reshape Filter Configuration Register, Address offset: 0x90 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x94-0xA0 */ + __IO uint32_t DLYCR; /*!< MDF Delay control Register, Address offset: 0xA4 */ + uint32_t RESERVED1[1]; /*!< Reserved, 0xA8 */ + __IO uint32_t DFLTIER; /*!< MDF DFLT Interrupt enable Register, Address offset: 0xAC */ + __IO uint32_t DFLTISR; /*!< MDF DFLT Interrupt status Register, Address offset: 0xB0 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0xB4 */ + __IO uint32_t SADCR; /*!< MDF SAD Control Register, Address offset: 0xB8 */ + __IO uint32_t SADCFGR; /*!< MDF SAD configuration register, Address offset: 0xBC */ + __IO uint32_t SADSDLVR; /*!< MDF SAD Sound level Register, Address offset: 0xC0 */ + __IO uint32_t SADANLVR; /*!< MDF SAD Ambient Noise level Register, Address offset: 0xC4 */ + uint32_t RESERVED3[10]; /*!< Reserved, 0xC8-0xEC */ + __IO uint32_t DFLTDR; /*!< MDF Digital Filter Data Register, Address offset: 0xF0 */ +} MDF_Filter_TypeDef; + +/** + * @brief XSPI + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPI Control Register, Address offset: 0x000 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x004 */ + __IO uint32_t DCR1; /*!< XSPI Device Configuration Register 1, Address offset: 0x008 */ + __IO uint32_t DCR2; /*!< XSPI Device Configuration Register 2, Address offset: 0x00C */ + __IO uint32_t DCR3; /*!< XSPI Device Configuration Register 3, Address offset: 0x010 */ + __IO uint32_t DCR4; /*!< XSPI Device Configuration Register 4, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t SR; /*!< XSPI Status Register, Address offset: 0x020 */ + __IO uint32_t FCR; /*!< XSPI Flag Clear Register, Address offset: 0x024 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x028 - 0x03C */ + __IO uint32_t DLR; /*!< XSPI Data Length Register, Address offset: 0x040 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x044 */ + __IO uint32_t AR; /*!< XSPI Address Register, Address offset: 0x048 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x04C */ + __IO uint32_t DR; /*!< XSPI Data Register, Address offset: 0x050 */ + uint32_t RESERVED6[11]; /*!< Reserved, Address offset: 0x054 - 0x07C */ + __IO uint32_t PSMKR; /*!< XSPI Polling Status Mask Register, Address offset: 0x080 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x084 */ + __IO uint32_t PSMAR; /*!< XSPI Polling Status Match Register, Address offset: 0x088 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0x08C */ + __IO uint32_t PIR; /*!< XSPI Polling Interval Register, Address offset: 0x090 */ + uint32_t RESERVED9[27]; /*!< Reserved, Address offset: 0x094 - 0x0FC */ + __IO uint32_t CCR; /*!< XSPI Communication Configuration Register, Address offset: 0x100 */ + uint32_t RESERVED10; /*!< Reserved, Address offset: 0x104 */ + __IO uint32_t TCR; /*!< XSPI Timing Configuration Register, Address offset: 0x108 */ + uint32_t RESERVED11; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t IR; /*!< XSPI Instruction Register, Address offset: 0x110 */ + uint32_t RESERVED12[3]; /*!< Reserved, Address offset: 0x114 - 0x11C */ + __IO uint32_t ABR; /*!< XSPI Alternate Bytes Register, Address offset: 0x120 */ + uint32_t RESERVED13[3]; /*!< Reserved, Address offset: 0x124 - 0x12C */ + __IO uint32_t LPTR; /*!< XSPI Low-Power Timeout Register, Address offset: 0x130 */ + uint32_t RESERVED14[3]; /*!< Reserved, Address offset: 0x134 - 0x13C */ + __IO uint32_t WPCCR; /*!< XSPI Wrap Communication Configuration Register, Address offset: 0x140 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x144 */ + __IO uint32_t WPTCR; /*!< XSPI Wrap Timing Configuration Register, Address offset: 0x148 */ + uint32_t RESERVED16; /*!< Reserved, Address offset: 0x14C */ + __IO uint32_t WPIR; /*!< XSPI Wrap Instruction Register, Address offset: 0x150 */ + uint32_t RESERVED17[3]; /*!< Reserved, Address offset: 0x154 - 0x15C */ + __IO uint32_t WPABR; /*!< XSPI Wrap Alternate Bytes Register, Address offset: 0x160 */ + uint32_t RESERVED18[7]; /*!< Reserved, Address offset: 0x164 - 0x17C */ + __IO uint32_t WCCR; /*!< XSPI Write Communication Configuration Register, Address offset: 0x180 */ + uint32_t RESERVED19; /*!< Reserved, Address offset: 0x184 */ + __IO uint32_t WTCR; /*!< XSPI Write Timing Configuration Register, Address offset: 0x188 */ + uint32_t RESERVED20; /*!< Reserved, Address offset: 0x18C */ + __IO uint32_t WIR; /*!< XSPI Write Instruction Register, Address offset: 0x190 */ + uint32_t RESERVED21[3]; /*!< Reserved, Address offset: 0x194 - 0x19C */ + __IO uint32_t WABR; /*!< XSPI Write Alternate Bytes Register, Address offset: 0x1A0 */ + uint32_t RESERVED22[23]; /*!< Reserved, Address offset: 0x1A4 - 0x1FC */ + __IO uint32_t HLCR; /*!< XSPI HyperBus Latency Configuration Register, Address offset: 0x200 */ + uint32_t RESERVED23[3]; /*!< Reserved, Address offset: 0x204 - 0x20C */ + __IO uint32_t CALFCR; /*!< XSPI Full-Cycle Calibration Configuration Register, Address offset: 0x210 */ + uint32_t RESERVED24; /*!< Reserved, Address offset: 0x214 */ + __IO uint32_t CALMR; /*!< XSPI DLL Master Calibration Configuration Register, Address offset: 0x218 */ + uint32_t RESERVED25; /*!< Reserved, Address offset: 0x21C */ + __IO uint32_t CALSOR; /*!< XSPI Slave Output Calibration Configuration Register, Address offset: 0x220 */ + uint32_t RESERVED26; /*!< Reserved, Address offset: 0x224 */ + __IO uint32_t CALSIR; /*!< XSPI Slave Input Calibration Configuration Register, Address offset: 0x228 */ +} XSPI_TypeDef; + +/** + * @brief XSPI IO Manager + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPIM IO Manager Control Register, Address offset: 0x00 */ +} XSPIM_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x04 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control status register 2, Address offset: 0x0C */ + __IO uint32_t CSR3; /*!< PWR power control status register 3, Address offset: 0x10 */ + __IO uint32_t CSR4; /*!< PWR power control status register 4, Address offset: 0x14 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ + __IO uint32_t UCPDR; /*!< PWR USB Type-C and power delivery register, Address offset: 0x2C */ + __IO uint32_t APCR; /*!< PWR apply pull configuration register, Address offset: 0x30 */ + __IO uint32_t PUCRN; /*!< PWR port N pull-up control register, Address offset: 0x34 */ + __IO uint32_t PDCRN; /*!< PWR port N pull-down control register, Address offset: 0x38 */ + __IO uint32_t PUCRO; /*!< PWR port O pull-up control register, Address offset: 0x3C */ + __IO uint32_t PDCRO; /*!< PWR port O pull-down control register, Address offset: 0x40 */ + __IO uint32_t PDCRP; /*!< PWR port P pull-down control register, Address offset: 0x44 */ + uint32_t RESERVED2[2]; /*!< Reserved */ + __IO uint32_t PDR1; /*!< PWR debug register 1, Address offset: 0x50 */ +} PWR_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved, Address offset: 0x000C-0x03FC */ + __IO uint32_t RAM[1334]; /*!< PKA RAM Address offset: 0x0400-0x18D8 */ +} PKA_TypeDef; + +/** + * @brief PSSI + */ +typedef struct +{ + __IO uint32_t CR; /*!< PSSI control register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< PSSI status register, Address offset: 0x004 */ + __IO uint32_t RIS; /*!< PSSI raw interrupt status register, Address offset: 0x008 */ + __IO uint32_t IER; /*!< PSSI interrupt enable register, Address offset: 0x00C */ + __IO uint32_t MIS; /*!< PSSI masked interrupt status register, Address offset: 0x010 */ + __IO uint32_t ICR; /*!< PSSI interrupt clear register, Address offset: 0x014 */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x018 - 0x024 */ + __IO uint32_t DR; /*!< PSSI data register, Address offset: 0x028 */ +} PSSI_TypeDef; + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI clock calibration register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock recovery RC register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI clock calibration register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CDCFGR; /*!< RCC CPU domain configuration register, Address offset: 0x18 */ + __IO uint32_t BMCFGR; /*!< RCC Bus matrix configuration register, Address offset: 0x1C */ + __IO uint32_t APBCFGR; /*!< RCC APB clock configuration register, Address offset: 0x20 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs clock source selection register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs configuration register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR1; /*!< RCC PLL1 dividers configuration register 1, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 fractional divider configuration register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR1; /*!< RCC PLL2 dividers configuration register 1, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 fractional divider configuration register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR1; /*!< RCC PLL3 dividers configuration register 1, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 fractional divider configuration register, Address offset: 0x44 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t CCIPR1; /*!< RCC AHB peripherals kernel clock configuration register Address offset: 0x4C */ + __IO uint32_t CCIPR2; /*!< RCC APB1 peripherals kernel clock configuration register Address offset: 0x50 */ + __IO uint32_t CCIPR3; /*!< RCC APB2 peripherals kernel clock configuration register Address offset: 0x54 */ + __IO uint32_t CCIPR4; /*!< RCC APB4/APB5 peripherals kernel clock configuration register Address offset: 0x58 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x68 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB5RSTR; /*!< RCC AHB5 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB5RSTR; /*!< RCC APB5 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x90 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0xA0 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0xA4 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0xA8-0xAC */ + __IO uint32_t CKGDISR ; /*!< RCC AXI clocks gating disable register, Address offset: 0xB0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xB4-0xBC */ + __IO uint32_t PLL1DIVR2; /*!< RCC PLL1 dividers configuration register 2, Address offset: 0xC0 */ + __IO uint32_t PLL2DIVR2; /*!< RCC PLL2 dividers configuration register 2, Address offset: 0xC4 */ + __IO uint32_t PLL3DIVR2; /*!< RCC PLL3 dividers configuration register 2, Address offset: 0xC8 */ + __IO uint32_t PLL1SSCGR; /*!< RCC PLL1 spread spectrum clock generator register, Address offset: 0xCC */ + __IO uint32_t PLL2SSCGR; /*!< RCC PLL2 spread spectrum clock generator register, Address offset: 0xD0 */ + __IO uint32_t PLL3SSCGR; /*!< RCC PLL3 spread spectrum clock generator register, Address offset: 0xD4 */ + uint32_t RESERVED9[10]; /*!< Reserved, Address offset: 0xD8-0xFC */ + __IO uint32_t CKPROTR; /*!< RCC clock protection register, Address offset: 0x100 */ + uint32_t RESERVED10[11]; /*!< Reserved, Address offset: 0x104-0x12C */ + __IO uint32_t RSR; /*!< RCC reset status register, Address offset: 0x130 */ + __IO uint32_t AHB5ENR; /*!< RCC AHB5 peripheral clocks enable register, Address offset: 0x134 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x138 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x13C */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clocks enable register, Address offset: 0x140 */ + __IO uint32_t APB5ENR; /*!< RCC APB5 peripheral clocks enable register, Address offset: 0x144 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x148 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x14C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x150 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clocks enable register, Address offset: 0x154 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x158 */ + __IO uint32_t AHB5LPENR; /*!< RCC AHB5 peripheral sleep clocks enable register, Address offset: 0x15C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clocks enable register, Address offset: 0x160 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clocks enable register, Address offset: 0x164 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clocks enable register, Address offset: 0x168 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clocks enable register, Address offset: 0x16C */ + __IO uint32_t APB1LPENR1; /*!< RCC APB1 peripheral sleep clocks enable register 1, Address offset: 0x170 */ + __IO uint32_t APB1LPENR2; /*!< RCC APB1 peripheral sleep clocks enable register 2, Address offset: 0x174 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clocks enable register, Address offset: 0x178 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clocks enable register, Address offset: 0x17C */ + __IO uint32_t APB5LPENR; /*!< RCC APB5 peripheral sleep clocks enable register, Address offset: 0x180 */ +} RCC_TypeDef; + +/** + * @brief Random Number Generator + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ + uint32_t RESERVED; + __IO uint32_t HTCR; /*!< RNG health test configuration register, Address offset: 0x10 */ +} RNG_TypeDef; + +/* +* @brief RTC Specific device feature definitions +*/ +#define RTC_BKP_NB 32U +#define RTC_TAMP_NB 8U + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + __IO uint32_t PRIVCFGR; /*!< RTC privilege mode control register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x3C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC masked interrupt status register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC status Clear register, Address offset: 0x5C */ + uint32_t RESERVED3[4];/*!< Reserved, Address offset: 0x58 */ + __IO uint32_t ALRABINR; /*!< RTC alarm A binary mode register, Address offset: 0x70 */ + __IO uint32_t ALRBBINR; /*!< RTC alarm B binary mode register, Address offset: 0x74 */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED[16]; /*!< Reserved, Address offset: 0x04 to 0x40 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief System configuration, boot and security controller + */ +typedef struct +{ + __IO uint32_t BOOTSR; /*!< SBS Boot Status register, Address offset: 0x00 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x04-0x0C */ + __IO uint32_t HDPLCR; /*!< SBS Hide Protection Control register, Address offset: 0x10 */ + __IO uint32_t HDPLSR; /*!< SBS Hide Protection Status register, Address offset: 0x14 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t DBGCR; /*!< SBS Debug Control register, Address offset: 0x20 */ + __IO uint32_t DBGLOCKR; /*!< SBS Debug Lock register, Address offset: 0x24 */ + uint32_t RESERVED3[3]; /*!< Reserved, Address offset: 0x28-0x30 */ + __IO uint32_t RSSCMDR; /*!< SBS RSS Command register, Address offset: 0x34 */ + uint32_t RESERVED4[50]; /*!< Reserved, Address offset: 0x38-0xFC */ + __IO uint32_t PMCR; /*!< SBS Product Mode & Config register, Address offset: 0x100 */ + __IO uint32_t FPUIMR; /*!< SBS FPU Interrupt Mask register, Address offset: 0x104 */ + __IO uint32_t MESR; /*!< SBS Memory Erase Status register, Address offset: 0x108 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t CCCSR; /*!< SBS IO Compensation Cell Control and Status register, Address offset: 0x110 */ + __IO uint32_t CCVALR; /*!< SBS IO Compensation Cell Value register, Address offset: 0x114 */ + __IO uint32_t CCSWVALR; /*!< SBS IO Compensation Cell Software Value register, Address offset: 0x118 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x11C */ + __IO uint32_t BKLOCKR; /*!< SBS Break Lockup register, Address offset: 0x120 */ + uint32_t RESERVED7[3]; /*!< Reserved, Address offset: 0x124-0x12C */ + __IO uint32_t EXTICR[4]; /*!< SBS External Interrupt Configuration registers, Address offset: 0x130-0x13C */ +} SBS_TypeDef; + +/** + * @brief Secure Digital Card/IO Embedded MultiMediaCard Interface + */ +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC Power control register, Address offset : 0x000 */ + __IO uint32_t CLKCR; /*!< SDMMC Clock control register, Address offset : 0x004 */ + __IO uint32_t ARG; /*!< SDMMC Argument register, Address offset : 0x008 */ + __IO uint32_t CMD; /*!< SDMMC Command register, Address offset : 0x00C */ + __IO uint32_t RESPCMD; /*!< SDMMC Command response register, Address offset : 0x010 */ + __IO uint32_t RESP1; /*!< SDMMC Response 1 register, Address offset : 0x014 */ + __IO uint32_t RESP2; /*!< SDMMC Response 2 register, Address offset : 0x018 */ + __IO uint32_t RESP3; /*!< SDMMC Response 3 register, Address offset : 0x01C */ + __IO uint32_t RESP4; /*!< SDMMC Response 4 register, Address offset : 0x020 */ + __IO uint32_t DTIMER; /*!< SDMMC Data timer register, Address offset : 0x024 */ + __IO uint32_t DLEN; /*!< SDMMC Data length register, Address offset : 0x028 */ + __IO uint32_t DCTRL; /*!< SDMMC Data control register, Address offset : 0x02C */ + __IO uint32_t DCOUNT; /*!< SDMMC Data counter register, Address offset : 0x030 */ + __IO uint32_t STA; /*!< SDMMC Status register, Address offset : 0x034 */ + __IO uint32_t ICR; /*!< SDMMC Interrupt clear register, Address offset : 0x038 */ + __IO uint32_t MASK; /*!< SDMMC Mask register, Address offset : 0x03C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset : 0x040 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset : 0x044 - 0x04C */ + __IO uint32_t IDMACTRL; /*!< SDMMC IDMA control register, Address offset : 0x050 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC IDMA buffer size register, Address offset : 0x054 */ + __IO uint32_t IDMABASER; /*!< SDMMC IDMA buffer base address register, Address offset : 0x058 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset : 0x05C - 0x060 */ + __IO uint32_t IDMALAR; /*!< SDMMC IDMA linked list address register, Address offset : 0x064 */ + __IO uint32_t IDMABAR; /*!< SDMMC IDMA linked list memory base register, Address offset : 0x068 */ + uint32_t RESERVED2[5]; /*!< Reserved, Address offset : 0x06C - 0x07C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset : 0x080 */ +} SDMMC_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + +/** + * @brief SPI + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t TXDR; /*!< SPI Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ +} SPI_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< TAMP configuration register 3, Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< TAMP filter control register, Address offset: 0x0C */ + __IO uint32_t ATCR1; /*!< TAMP filter control register 1 Address offset: 0x10 */ + __IO uint32_t ATSEEDR; /*!< TAMP active tamper seed register, Address offset: 0x14 */ + __IO uint32_t ATOR; /*!< TAMP active tamper output register, Address offset: 0x18 */ + __IO uint32_t ATCR2; /*!< TAMP filter control register 2, Address offset: 0x1C */ + __IO uint32_t CFGR; /*!< TAMP configuration control register, Address offset: 0x20 */ + __IO uint32_t PRIVCFGR; /*!< TAMP privilege mode control register, Address offset: 0x24 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t IER; /*!< TAMP interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP masked interrupt status register, Address offset: 0x34 */ + __IO uint32_t RESERVED3; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP status clear register, Address offset: 0x3C */ + __IO uint32_t COUNT1R; /*!< TAMP monotonic counter 1 register, Address offset: 0x40 */ + uint32_t RESERVED4[4]; /*!< Reserved, Address offset: 0x43 -- 0x50 */ + __IO uint32_t RPCFGR; /*!< TAMP resources protection configuration register, Address offset: 0x54 */ + uint32_t RESERVED5[42]; /*!< Reserved, Address offset: 0x58 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ + __IO uint32_t BKP5R; /*!< TAMP backup register 5, Address offset: 0x114 */ + __IO uint32_t BKP6R; /*!< TAMP backup register 6, Address offset: 0x118 */ + __IO uint32_t BKP7R; /*!< TAMP backup register 7, Address offset: 0x11C */ + __IO uint32_t BKP8R; /*!< TAMP backup register 8, Address offset: 0x120 */ + __IO uint32_t BKP9R; /*!< TAMP backup register 9, Address offset: 0x124 */ + __IO uint32_t BKP10R; /*!< TAMP backup register 10, Address offset: 0x128 */ + __IO uint32_t BKP11R; /*!< TAMP backup register 11, Address offset: 0x12C */ + __IO uint32_t BKP12R; /*!< TAMP backup register 12, Address offset: 0x130 */ + __IO uint32_t BKP13R; /*!< TAMP backup register 13, Address offset: 0x134 */ + __IO uint32_t BKP14R; /*!< TAMP backup register 14, Address offset: 0x138 */ + __IO uint32_t BKP15R; /*!< TAMP backup register 15, Address offset: 0x13C */ + __IO uint32_t BKP16R; /*!< TAMP backup register 16, Address offset: 0x140 */ + __IO uint32_t BKP17R; /*!< TAMP backup register 17, Address offset: 0x144 */ + __IO uint32_t BKP18R; /*!< TAMP backup register 18, Address offset: 0x148 */ + __IO uint32_t BKP19R; /*!< TAMP backup register 19, Address offset: 0x14C */ + __IO uint32_t BKP20R; /*!< TAMP backup register 20, Address offset: 0x150 */ + __IO uint32_t BKP21R; /*!< TAMP backup register 21, Address offset: 0x154 */ + __IO uint32_t BKP22R; /*!< TAMP backup register 22, Address offset: 0x158 */ + __IO uint32_t BKP23R; /*!< TAMP backup register 23, Address offset: 0x15C */ + __IO uint32_t BKP24R; /*!< TAMP backup register 24, Address offset: 0x160 */ + __IO uint32_t BKP25R; /*!< TAMP backup register 25, Address offset: 0x164 */ + __IO uint32_t BKP26R; /*!< TAMP backup register 26, Address offset: 0x168 */ + __IO uint32_t BKP27R; /*!< TAMP backup register 27, Address offset: 0x16C */ + __IO uint32_t BKP28R; /*!< TAMP backup register 28, Address offset: 0x170 */ + __IO uint32_t BKP29R; /*!< TAMP backup register 29, Address offset: 0x174 */ + __IO uint32_t BKP30R; /*!< TAMP backup register 30, Address offset: 0x178 */ + __IO uint32_t BKP31R; /*!< TAMP backup register 31, Address offset: 0x17C */ +} TAMP_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register 5, Address offset: 0x48 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register 6, Address offset: 0x4C */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x50 */ + __IO uint32_t DTR2; /*!< TIM deadtime register 2, Address offset: 0x54 */ + __IO uint32_t ECR; /*!< TIM encoder control register, Address offset: 0x58 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + uint32_t RESERVED0[221]; /*!< Reserved, Address offset: 0x68 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x3DC */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x3E0 */ +} TIM_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t CFG3; /*!< UCPD configuration register 3, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ +} UCPD_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register, Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register, Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register, Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register, Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register, Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register, Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register, Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register, Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register, Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register, Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register, Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg, Address offset: 02Ch */ + __IO uint32_t Reserved30[2]; /*!< Reserved, Address offset: 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register, Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register, Address offset: 03Ch */ + __IO uint32_t GSNPSID; /*!< USB_OTG core ID, Address offset: 040h */ + __IO uint32_t GHWCFG1; /*!< User HW config1, Address offset: 044h */ + __IO uint32_t GHWCFG2; /*!< User HW config2, Address offset: 048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3, Address offset: 04Ch */ + __IO uint32_t Reserved6; /*!< Reserved, Address offset: 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register, Address offset: 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register, Address offset: 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register, Address offset: 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register, Address offset: 60Ch */ + __IO uint32_t Reserved43[39]; /*!< Reserved, Address offset: 058h */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg, Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 104h */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register, Address offset: 800h */ + __IO uint32_t DCTL; /*!< dev Control Register, Address offset: 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO), Address offset: 808h */ + uint32_t Reserved0C; /*!< Reserved, Address offset: 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask, Address offset: 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask, Address offset: 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg, Address offset: 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask, Address offset: 81Ch */ + uint32_t Reserved20; /*!< Reserved, Address offset: 820h */ + uint32_t Reserved9; /*!< Reserved, Address offset: 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register, Address offset: 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register, Address offset: 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold, Address offset: 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk, Address offset: 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt, Address offset: 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk, Address offset: 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask, Address offset: 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask, Address offset: 844h */ + uint32_t Reserved44[15]; /*!< Reserved, Address offset: 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk, Address offset: 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Register, Address offset: 900h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Register, Address offset: 900h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size Register, Address offset: 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Register, Address offset: 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Register, Address offset: 900h + (ep_num * 20h) + 18h */ + __IO uint32_t Reserved18; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Register, Address offset: B00h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Register, Address offset: B00h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size Register, Address offset: B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address Register, Address offset: B00h + (ep_num * 20h) + 14h */ + __IO uint32_t Reserved18[2]; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 18h */ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register, Address offset: 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register, Address offset: 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining, Address offset: 408h */ + uint32_t Reserved40C; /*!< Reserved, Address offset: 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status, Address offset: 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register, Address offset: 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask, Address offset: 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register, Address offset: 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register, Address offset: 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register, Address offset: 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register, Address offset: 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register, Address offset: 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register, Address offset: 514h */ + uint32_t Reserved[2]; /*!< Reserved, Address offset: 518h */ +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Window Watchdog + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/*@}*/ /* end of group STM32H7RSxx_peripherals */ + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + +/** @addtogroup STM32H7RSxx_Peripheral_peripheralAddr + * @{ + */ +#define ITCM_BASE 0x00000000UL /*!< ITCM base address */ +#define FLASH_BASE 0x08000000UL /*!< User Flash address */ +#define OTP_AREA_BASE 0x08FFF000UL /*!< OTP Area base address */ +#define ENGI_BYTES_BASE 0x52002800UL /*!< Engi Bytes */ +#define SYSTEM_FLASH_BASE 0x1FF00000UL /*!< System Flash base address */ +#define DTCM_BASE 0x20000000UL /*!< DTCM base address */ +#define SRAM1_AXI_BASE 0x24000000UL /*!< SRAM1 base address - accessible over AXI */ +#define SRAM2_AXI_BASE 0x24020000UL /*!< SRAM2 base address - accessible over AXI */ +#define SRAM3_AXI_BASE 0x24040000UL /*!< SRAM3 base address - accessible over AXI */ +#define SRAM4_AXI_BASE 0x24060000UL /*!< SRAM4 base address - accessible over AXI */ + +#define GFXMMU_VIRTUAL_BUFFER0_BASE 0x25000000UL /*!< GFXMMU virtual buffer 0 base address */ +#define GFXMMU_VIRTUAL_BUFFER1_BASE 0x25400000UL /*!< GFXMMU virtual buffer 1 base address */ +#define GFXMMU_VIRTUAL_BUFFER2_BASE 0x25800000UL /*!< GFXMMU virtual buffer 2 base address */ +#define GFXMMU_VIRTUAL_BUFFER3_BASE 0x25C00000UL /*!< GFXMMU virtual buffer 3 base address */ + +#define SRAM1_AHB_BASE 0x30000000UL /*!< SRAM1 base address */ +#define SRAM2_AHB_BASE 0x30004000UL /*!< SRAM2 base address */ +#define BKPSRAM_BASE 0x38800000UL /*!< Backup SRAM */ + +#define PERIPH_BASE 0x40000000UL /*!< AHB and APB Peripherals base address */ +#define XSPI2_BASE 0x70000000UL /*!< XSPI2 base address */ +#define XSPI1_BASE 0x90000000UL /*!< XSPI1 base address */ + +/*!< Internal memory size */ +#define ITCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define DTCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define FLASH_SIZE 0x00010000UL /*!< 64 KB */ +#define SRAM1_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase ITCM */ +#define SRAM2_AXI_SIZE 0x00020000UL /*!< 128 KB */ +#define SRAM3_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase DTCM */ +#define SRAM4_AXI_SIZE 0x00012000UL /*!< 72 KB default, can be decreased to 0 KB when RAM ECC is disable */ +#define SRAM_AHB_SIZE 0x00004000UL /*!< Both AHB SRAMs are 16 KB */ +#define BKPSRAM_SIZE 0x00001000UL /*!< 4 KB */ + +/*!< OTP Area size */ +#define OTP_SIZE 0x400U /* 1 KB */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x02000000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x08020000UL) +#define APB5PERIPH_BASE (PERIPH_BASE + 0x10000000UL) +#define AHB5PERIPH_BASE (PERIPH_BASE + 0x12000000UL) +#define APB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18020000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I3C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00UL) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x8400UL) +#define MDIOS_BASE (APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (APB1PERIPH_BASE + 0xA000UL) +#define FDCAN_CONFIG_BASE (APB1PERIPH_BASE + 0xA100UL) /*!< FDCAN configuration registers base address */ +#define FDCAN2_BASE (APB1PERIPH_BASE + 0xA400UL) +#define SRAMCAN_BASE (APB1PERIPH_BASE + 0xAC00UL) +#define UCPD1_BASE (APB1PERIPH_BASE + 0xEC00UL) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00UL) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) + +/*!< AHB1 peripherals */ +#define GPDMA1_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define GPDMA1_Channel0_BASE (GPDMA1_BASE + 0x0050UL) +#define GPDMA1_Channel1_BASE (GPDMA1_BASE + 0x00D0UL) +#define GPDMA1_Channel2_BASE (GPDMA1_BASE + 0x0150UL) +#define GPDMA1_Channel3_BASE (GPDMA1_BASE + 0x01D0UL) +#define GPDMA1_Channel4_BASE (GPDMA1_BASE + 0x0250UL) +#define GPDMA1_Channel5_BASE (GPDMA1_BASE + 0x02D0UL) +#define GPDMA1_Channel6_BASE (GPDMA1_BASE + 0x0350UL) +#define GPDMA1_Channel7_BASE (GPDMA1_BASE + 0x03D0UL) +#define GPDMA1_Channel8_BASE (GPDMA1_BASE + 0x0450UL) +#define GPDMA1_Channel9_BASE (GPDMA1_BASE + 0x04D0UL) +#define GPDMA1_Channel10_BASE (GPDMA1_BASE + 0x0550UL) +#define GPDMA1_Channel11_BASE (GPDMA1_BASE + 0x05D0UL) +#define GPDMA1_Channel12_BASE (GPDMA1_BASE + 0x0650UL) +#define GPDMA1_Channel13_BASE (GPDMA1_BASE + 0x06D0UL) +#define GPDMA1_Channel14_BASE (GPDMA1_BASE + 0x0750UL) +#define GPDMA1_Channel15_BASE (GPDMA1_BASE + 0x07D0UL) +#define ADC1_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (AHB1PERIPH_BASE + 0x2300UL) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) +#define ETH_MAC_BASE (ETH_BASE) +#define ADF1_BASE (AHB1PERIPH_BASE + 0xF000UL) +#define ADF1_Filter0_BASE (ADF1_BASE + 0x0080UL) +#define USB_OTG_HS_PERIPH_BASE (AHB1PERIPH_BASE + 0x20000UL) +#define USB_OTG_FS_PERIPH_BASE (AHB1PERIPH_BASE + 0x60000UL) + +/*!< AHB2 peripherals */ +#define PSSI_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define SDMMC2_BASE (AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (AHB2PERIPH_BASE + 0x2800UL) +#define CORDIC_BASE (AHB2PERIPH_BASE + 0x4400UL) + +/*!< AHB3 peripherals */ +#define RNG_BASE AHB3PERIPH_BASE +#define HASH_BASE (AHB3PERIPH_BASE + 0x0400UL) +#define HASH_DIGEST_BASE (AHB3PERIPH_BASE + 0x0710UL) +#define PKA_BASE (AHB3PERIPH_BASE + 0x2000UL) + +/*!< APB5 peripherals */ +#define DCMIPP_BASE (APB5PERIPH_BASE + 0x2000UL) +#define GFXTIM_BASE (APB5PERIPH_BASE + 0x4000UL) + +/*!< AHB5 peripherals */ +#define HPDMA1_BASE AHB5PERIPH_BASE +#define HPDMA1_Channel0_BASE (HPDMA1_BASE + 0x0050UL) +#define HPDMA1_Channel1_BASE (HPDMA1_BASE + 0x00D0UL) +#define HPDMA1_Channel2_BASE (HPDMA1_BASE + 0x0150UL) +#define HPDMA1_Channel3_BASE (HPDMA1_BASE + 0x01D0UL) +#define HPDMA1_Channel4_BASE (HPDMA1_BASE + 0x0250UL) +#define HPDMA1_Channel5_BASE (HPDMA1_BASE + 0x02D0UL) +#define HPDMA1_Channel6_BASE (HPDMA1_BASE + 0x0350UL) +#define HPDMA1_Channel7_BASE (HPDMA1_BASE + 0x03D0UL) +#define HPDMA1_Channel8_BASE (HPDMA1_BASE + 0x0450UL) +#define HPDMA1_Channel9_BASE (HPDMA1_BASE + 0x04D0UL) +#define HPDMA1_Channel10_BASE (HPDMA1_BASE + 0x0550UL) +#define HPDMA1_Channel11_BASE (HPDMA1_BASE + 0x05D0UL) +#define HPDMA1_Channel12_BASE (HPDMA1_BASE + 0x0650UL) +#define HPDMA1_Channel13_BASE (HPDMA1_BASE + 0x06D0UL) +#define HPDMA1_Channel14_BASE (HPDMA1_BASE + 0x0750UL) +#define HPDMA1_Channel15_BASE (HPDMA1_BASE + 0x07D0UL) +#define DMA2D_BASE (AHB5PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB5PERIPH_BASE + 0x2000UL) +#define JPEG_BASE (AHB5PERIPH_BASE + 0x3000UL) +#define FMC_R_BASE (AHB5PERIPH_BASE + 0x4000UL) +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) +#define XSPI1_R_BASE (AHB5PERIPH_BASE + 0x5000UL) +#define DLYB_XSPI1_BASE (AHB5PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (AHB5PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (AHB5PERIPH_BASE + 0x8000UL) +#define RAMECC1_BASE (AHB5PERIPH_BASE + 0x9000UL) +#define RAMECC1_Monitor0_BASE (RAMECC1_BASE + 0x20UL) +#define RAMECC1_Monitor1_BASE (RAMECC1_BASE + 0x40UL) +#define RAMECC1_Monitor2_BASE (RAMECC1_BASE + 0x60UL) +#define RAMECC1_Monitor3_BASE (RAMECC1_BASE + 0x80UL) +#define RAMECC1_Monitor4_BASE (RAMECC1_BASE + 0xA0UL) +#define XSPI2_R_BASE (AHB5PERIPH_BASE + 0xA000UL) +#define DLYB_XSPI2_BASE (AHB5PERIPH_BASE + 0xB000UL) +#define XSPIM_BASE (AHB5PERIPH_BASE + 0xB400UL) +#define GFXMMU_BASE (AHB5PERIPH_BASE + 0x010000UL) + +/*!< APB4 peripherals */ +#define EXTI_BASE APB4PERIPH_BASE +#define SBS_BASE (APB4PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (APB4PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (APB4PERIPH_BASE + 0x1400UL) +#define LPTIM2_BASE (APB4PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (APB4PERIPH_BASE + 0x2800UL) +#define LPTIM4_BASE (APB4PERIPH_BASE + 0x2C00UL) +#define LPTIM5_BASE (APB4PERIPH_BASE + 0x3000UL) +#define VREFBUF_BASE (APB4PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (APB4PERIPH_BASE + 0x4000UL) +#define TAMP_BASE (APB4PERIPH_BASE + 0x4400UL) +#define IWDG_BASE (APB4PERIPH_BASE + 0x4800UL) +#define DTS_BASE (APB4PERIPH_BASE + 0x6800UL) + +/*!< AHB4 peripherals */ +#define GPIOA_BASE AHB4PERIPH_BASE +#define GPIOB_BASE (AHB4PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB4PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB4PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB4PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (AHB4PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (AHB4PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (AHB4PERIPH_BASE + 0x1C00UL) +#define GPIOM_BASE (AHB4PERIPH_BASE + 0x3000UL) +#define GPION_BASE (AHB4PERIPH_BASE + 0x3400UL) +#define GPIOO_BASE (AHB4PERIPH_BASE + 0x3800UL) +#define GPIOP_BASE (AHB4PERIPH_BASE + 0x3C00UL) +#define RCC_BASE (AHB4PERIPH_BASE + 0x4400UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x4800UL) +#define CRC_BASE (AHB4PERIPH_BASE + 0x4C00UL) +#define RAMECC2_BASE (AHB4PERIPH_BASE + 0x7000UL) +#define RAMECC2_Monitor1_BASE (RAMECC2_BASE + 0x40UL) + +/*!< Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +/*!< AXIM registers base address */ +#define AXIM_BASE (0xBFF00000UL) +#define AXIM_ASIB1_BASE (AXIM_BASE + 0x42000UL) +#define AXIM_ASIB2_BASE (AXIM_BASE + 0x43000UL) +#define AXIM_ASIB3_BASE (AXIM_BASE + 0x44000UL) +#define AXIM_ASIB4_BASE (AXIM_BASE + 0x45000UL) +#define AXIM_ASIB5_BASE (AXIM_BASE + 0x46000UL) +#define AXIM_ASIB6_BASE (AXIM_BASE + 0x47000UL) +#define AXIM_ASIB7_BASE (AXIM_BASE + 0x48000UL) +#define AXIM_ASIB8_BASE (AXIM_BASE + 0x49000UL) +#define AXIM_ASIB9_BASE (AXIM_BASE + 0x4A000UL) +#define AXIM_ASIB10_BASE (AXIM_BASE + 0x4B000UL) +#define AXIM_ASIB11_BASE (AXIM_BASE + 0x4C000UL) +#define AXIM_AMIB1_BASE (AXIM_BASE + 0x02000UL) +#define AXIM_AMIB2_BASE (AXIM_BASE + 0x03000UL) +#define AXIM_AMIB3_BASE (AXIM_BASE + 0x04000UL) +#define AXIM_AMIB4_BASE (AXIM_BASE + 0x05000UL) +#define AXIM_AMIB5_BASE (AXIM_BASE + 0x06000UL) +#define AXIM_AMIB6_BASE (AXIM_BASE + 0x07000UL) +#define AXIM_AMIB7_BASE (AXIM_BASE + 0x08000UL) +#define AXIM_AMIB8_BASE (AXIM_BASE + 0x09000UL) +#define AXIM_AMIB9_BASE (AXIM_BASE + 0x0A000UL) +#define AXIM_AMIB10_BASE (AXIM_BASE + 0x0B000UL) + +/*!< Unique device ID register base address */ +#define UID_BASE (0x08FFF800UL) + +/*!< Flash size data register base address */ +#define FLASHSIZE_BASE (0x08FFF80CUL) + +/*!< Package data register base address */ +#define PACKAGE_BASE (0x08FFF80CUL) + +/* USB OTG registers base addresses */ +#define USB_OTG_GLOBAL_BASE (0x0000UL) +#define USB_OTG_DEVICE_BASE (0x0800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x0900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0x0B00UL) +#define USB_OTG_EP_REG_SIZE (0x0020UL) +#define USB_OTG_HOST_BASE (0x0400UL) +#define USB_OTG_HOST_PORT_BASE (0x0440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x0500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x0020UL) +#define USB_OTG_PCGCCTL_BASE (0x0E00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< Root Secure Service Library */ +/************ RSSLIB system Flash region definition constants *************/ +#define RSSLIB_SYS_FLASH_PFUNC_START (0x1FF1FD4CUL) +#define RSSLIB_SYS_FLASH_PFUNC_END (0x1FF1FD78UL) + +/************ RSSLIB function return constants ********************************/ +#define RSSLIB_ERROR (0xF5F5F5F5UL) +#define RSSLIB_SUCCESS (0xEAEAEAEAUL) + +/*!< RSSLIB pointer function structure address definition */ +#define RSSLIB_PFUNC_BASE (0x1FF1FD4CUL) +#define RSSLIB_PFUNC ((RSSLIB_pFunc_TypeDef *)RSSLIB_PFUNC_BASE) + +/** + * @brief Prototype of RSSLIB Jump to HDP level2 Function + * @detail This function increments HDP level up to HDP level 2 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl2_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Prototype of RSSLIB Jump to HDP level3 Function + * @detail This function increments HDP level up to HDP level 3 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl3_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Input parameter definition of RSSLIB_DataProvisioning + */ +typedef struct +{ + uint32_t *pSource; /*!< Address of the Data to be provisioned, shall be in SRAM3 */ + uint32_t Destination; /*!< OBKeys destination information where to provision Data */ + uint32_t Size; /*!< Size in bytes of the Data to be provisioned*/ + uint32_t DoEncryption; /*!< Notifies RSSLIB_DataProvisioning to encrypt or not Data*/ + uint32_t Crc; /*!< CRC over full Data buffer and previous field in the structure*/ +} RSSLIB_DataProvisioningConf_t; + +/** + * @brief Prototype of RSSLIB Data Provisioning Function + * @detail This function write Data within OBKeys sections. + * @param pointer on the structure defining Data to be provisioned and where to + * provision them within OBKeys sections. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_DataProvisioning_TypeDef)(RSSLIB_DataProvisioningConf_t *pConfig); + +/** + * @brief Prototype of RSSLIB Set Secure OB Function + * @detail This function configure a secure OB. + * @param OB address among following values: + * &(FLASH->WRPSRP), &(FLASH->HDPSRP) or &(FLASH->ROTSRP) + * @param OB mask (example 0x000000FF for updating WRP OB). + * @param OB value + * @param OB Pos: bit position of OB value. + * ObValue << ObPos must be aligned on ObMask. + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetSecOB_TypeDef)(uint32_t ObAddr, uint32_t ObMask, uint32_t ObValue, uint32_t ObPos); + +/** + * @brief Prototype of RSSLIB Get RSS Status Function + * @detail This function return RSS Status. + * Calling GetRssStatus is only relevant after calling + * SetSecOB or DataProvisioning. + * @param none. + * @retval RSSLIB_SUCCESS on success, otherwise return an error 0xF5F5xxxx. + */ +typedef uint32_t (*RSSLIB_GetRssStatus_TypeDef)(void); + +/** + * @brief Prototype of RSSLIB Set Product State Function + * @detail This function change Product State. + * @param Requested Product State among following values: + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetProductState_TypeDef)(uint32_t ProductState); + +/** + * @brief Prototype of RSSLIB Get Product State Function + * @detail This function return current Product State. + * @param none. + * @retval RSSLIB_RSS_ERROR on error, + * otherwise return product state among following values: + * 0x39 : Open + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + */ +typedef uint32_t (*RSSLIB_GetProductState_TypeDef)(void); + + +/** + * @brief RSSLib callable function pointer structure + */ +typedef struct +{ + __IM RSSLIB_SetSecOB_TypeDef SetSecOB; + uint32_t RESERVED1[4]; + __IM RSSLIB_GetRssStatus_TypeDef GetRssStatus; + __IM RSSLIB_SetProductState_TypeDef SetProductState; + __IM RSSLIB_DataProvisioning_TypeDef DataProvisioning; + __IM RSSLIB_JumpHDPlvl2_TypeDef JumpHDPLvl2; + __IM RSSLIB_JumpHDPlvl3_TypeDef JumpHDPLvl3; + __IM RSSLIB_GetProductState_TypeDef GetProductState; +} RSSLIB_pFunc_TypeDef; + + +/** @} */ /* End of group STM32H7RSxx_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_Peripheral_declaration + * @{ + */ + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) +#define ADF1 ((MDF_TypeDef *) ADF1_BASE) +#define ADF1_Filter0 ((MDF_Filter_TypeDef *) ADF1_Filter0_BASE) +#define AXIM_AMIB_1 ((AXIM_AMIB_TypeDef *) AXIM_AMIB1_BASE ) +#define AXIM_AMIB_2 ((AXIM_AMIB_TypeDef *) AXIM_AMIB2_BASE ) +#define AXIM_AMIB_3 ((AXIM_AMIB_TypeDef *) AXIM_AMIB3_BASE ) +#define AXIM_AMIB_4 ((AXIM_AMIB_TypeDef *) AXIM_AMIB4_BASE ) +#define AXIM_AMIB_5 ((AXIM_AMIB_TypeDef *) AXIM_AMIB5_BASE ) +#define AXIM_AMIB_6 ((AXIM_AMIB_TypeDef *) AXIM_AMIB6_BASE ) +#define AXIM_AMIB_7 ((AXIM_AMIB_TypeDef *) AXIM_AMIB7_BASE ) +#define AXIM_AMIB_8 ((AXIM_AMIB_TypeDef *) AXIM_AMIB8_BASE ) +#define AXIM_AMIB_9 ((AXIM_AMIB_TypeDef *) AXIM_AMIB9_BASE ) +#define AXIM_AMIB_10 ((AXIM_AMIB_TypeDef *) AXIM_AMIB10_BASE) +#define AXIM_ASIB_1 ((AXIM_ASIB_TypeDef *) AXIM_ASIB1_BASE ) +#define AXIM_ASIB_2 ((AXIM_ASIB_TypeDef *) AXIM_ASIB2_BASE ) +#define AXIM_ASIB_3 ((AXIM_ASIB_TypeDef *) AXIM_ASIB3_BASE ) +#define AXIM_ASIB_4 ((AXIM_ASIB_TypeDef *) AXIM_ASIB4_BASE ) +#define AXIM_ASIB_5 ((AXIM_ASIB_TypeDef *) AXIM_ASIB5_BASE ) +#define AXIM_ASIB_6 ((AXIM_ASIB_TypeDef *) AXIM_ASIB6_BASE ) +#define AXIM_ASIB_7 ((AXIM_ASIB_TypeDef *) AXIM_ASIB7_BASE ) +#define AXIM_ASIB_8 ((AXIM_ASIB_TypeDef *) AXIM_ASIB8_BASE ) +#define AXIM_ASIB_9 ((AXIM_ASIB_TypeDef *) AXIM_ASIB9_BASE ) +#define AXIM_ASIB_10 ((AXIM_ASIB_TypeDef *) AXIM_ASIB10_BASE) +#define AXIM_ASIB_11 ((AXIM_ASIB_TypeDef *) AXIM_ASIB11_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define CORDIC ((CORDIC_TypeDef *) CORDIC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define DCMIPP ((DCMIPP_TypeDef *) DCMIPP_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) +#define DLYB_XSPI1 ((DLYB_TypeDef *) DLYB_XSPI1_BASE) +#define DLYB_XSPI2 ((DLYB_TypeDef *) DLYB_XSPI2_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DTS ((DTS_TypeDef *) DTS_BASE) +#define ETH ((ETH_TypeDef *)ETH_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CONFIG ((FDCAN_Config_TypeDef *) FDCAN_CONFIG_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define GFXTIM ((GFXTIM_TypeDef *) GFXTIM_BASE) +#define GFXMMU ((GFXMMU_TypeDef *) GFXMMU_BASE) +#define GPDMA1 ((DMA_TypeDef *) GPDMA1_BASE) +#define GPDMA1_Channel0 ((DMA_Channel_TypeDef *) GPDMA1_Channel0_BASE) +#define GPDMA1_Channel1 ((DMA_Channel_TypeDef *) GPDMA1_Channel1_BASE) +#define GPDMA1_Channel2 ((DMA_Channel_TypeDef *) GPDMA1_Channel2_BASE) +#define GPDMA1_Channel3 ((DMA_Channel_TypeDef *) GPDMA1_Channel3_BASE) +#define GPDMA1_Channel4 ((DMA_Channel_TypeDef *) GPDMA1_Channel4_BASE) +#define GPDMA1_Channel5 ((DMA_Channel_TypeDef *) GPDMA1_Channel5_BASE) +#define GPDMA1_Channel6 ((DMA_Channel_TypeDef *) GPDMA1_Channel6_BASE) +#define GPDMA1_Channel7 ((DMA_Channel_TypeDef *) GPDMA1_Channel7_BASE) +#define GPDMA1_Channel8 ((DMA_Channel_TypeDef *) GPDMA1_Channel8_BASE) +#define GPDMA1_Channel9 ((DMA_Channel_TypeDef *) GPDMA1_Channel9_BASE) +#define GPDMA1_Channel10 ((DMA_Channel_TypeDef *) GPDMA1_Channel10_BASE) +#define GPDMA1_Channel11 ((DMA_Channel_TypeDef *) GPDMA1_Channel11_BASE) +#define GPDMA1_Channel12 ((DMA_Channel_TypeDef *) GPDMA1_Channel12_BASE) +#define GPDMA1_Channel13 ((DMA_Channel_TypeDef *) GPDMA1_Channel13_BASE) +#define GPDMA1_Channel14 ((DMA_Channel_TypeDef *) GPDMA1_Channel14_BASE) +#define GPDMA1_Channel15 ((DMA_Channel_TypeDef *) GPDMA1_Channel15_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) +#define GPION ((GPIO_TypeDef *) GPION_BASE) +#define GPIOO ((GPIO_TypeDef *) GPIOO_BASE) +#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define HPDMA1 ((DMA_TypeDef *) HPDMA1_BASE) +#define HPDMA1_Channel0 ((DMA_Channel_TypeDef *) HPDMA1_Channel0_BASE) +#define HPDMA1_Channel1 ((DMA_Channel_TypeDef *) HPDMA1_Channel1_BASE) +#define HPDMA1_Channel2 ((DMA_Channel_TypeDef *) HPDMA1_Channel2_BASE) +#define HPDMA1_Channel3 ((DMA_Channel_TypeDef *) HPDMA1_Channel3_BASE) +#define HPDMA1_Channel4 ((DMA_Channel_TypeDef *) HPDMA1_Channel4_BASE) +#define HPDMA1_Channel5 ((DMA_Channel_TypeDef *) HPDMA1_Channel5_BASE) +#define HPDMA1_Channel6 ((DMA_Channel_TypeDef *) HPDMA1_Channel6_BASE) +#define HPDMA1_Channel7 ((DMA_Channel_TypeDef *) HPDMA1_Channel7_BASE) +#define HPDMA1_Channel8 ((DMA_Channel_TypeDef *) HPDMA1_Channel8_BASE) +#define HPDMA1_Channel9 ((DMA_Channel_TypeDef *) HPDMA1_Channel9_BASE) +#define HPDMA1_Channel10 ((DMA_Channel_TypeDef *) HPDMA1_Channel10_BASE) +#define HPDMA1_Channel11 ((DMA_Channel_TypeDef *) HPDMA1_Channel11_BASE) +#define HPDMA1_Channel12 ((DMA_Channel_TypeDef *) HPDMA1_Channel12_BASE) +#define HPDMA1_Channel13 ((DMA_Channel_TypeDef *) HPDMA1_Channel13_BASE) +#define HPDMA1_Channel14 ((DMA_Channel_TypeDef *) HPDMA1_Channel14_BASE) +#define HPDMA1_Channel15 ((DMA_Channel_TypeDef *) HPDMA1_Channel15_BASE) +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I3C1 ((I3C_TypeDef *) I3C1_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define LPTIM4 ((LPTIM_TypeDef *) LPTIM4_BASE) +#define LPTIM5 ((LPTIM_TypeDef *) LPTIM5_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define PSSI ((PSSI_TypeDef *) PSSI_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RAMECC1 ((RAMECC_TypeDef *)RAMECC1_BASE) +#define RAMECC2 ((RAMECC_TypeDef *)RAMECC2_BASE) +#define RAMECC1_Monitor0 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor0_BASE) +#define RAMECC1_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor1_BASE) +#define RAMECC1_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor2_BASE) +#define RAMECC1_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor3_BASE) +#define RAMECC1_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor4_BASE) +#define RAMECC2_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor1_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *) SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *) SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *) SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *) SAI2_Block_B_BASE) +#define SBS ((SBS_TypeDef *) SBS_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define XSPI1 ((XSPI_TypeDef *) XSPI1_R_BASE) +#define XSPI2 ((XSPI_TypeDef *) XSPI2_R_BASE) +#define XSPIM ((XSPIM_TypeDef *) XSPIM_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) + +/** @} */ /* End of group STM32H7RSxx_Peripheral_declaration */ + +/** @addtogroup STM32H7RSxx_Peripheral_Exported_constants + * @{ + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Registers_Bits_Definition + * @{ + */ +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G4 series) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_ADFCFG_Pos (2U) +#define ADC_CFGR_ADFCFG_Msk (0x1UL << ADC_CFGR_ADFCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_ADFCFG ADC_CFGR_ADFCFG_Msk /*!< ADC ADF transfer configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR_ALIGN_Pos (15U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00008000 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +#define ADC_CFGR2_SWTRIG_Pos (25U) +#define ADC_CFGR2_SWTRIG_Msk (0x1UL << ADC_CFGR2_SWTRIG_Pos) /*!< 0x02000000 */ +#define ADC_CFGR2_SWTRIG ADC_CFGR2_SWTRIG_Msk /*!< ADC Software Trigger Bit for Sample time control trigger mode */ +#define ADC_CFGR2_BULB_Pos (26U) +#define ADC_CFGR2_BULB_Msk (0x1UL << ADC_CFGR2_BULB_Pos) /*!< 0x04000000 */ +#define ADC_CFGR2_BULB ADC_CFGR2_BULB_Msk /*!< ADC Bulb sampling mode */ +#define ADC_CFGR2_SMPTRIG_Pos (27U) +#define ADC_CFGR2_SMPTRIG_Msk (0x1UL << ADC_CFGR2_SMPTRIG_Pos) /*!< 0x08000000 */ +#define ADC_CFGR2_SMPTRIG ADC_CFGR2_SMPTRIG_Msk /*!< ADC Sample Time Control Trigger mode */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ + +#define ADC_TR1_AWDFILT_Pos (12U) +#define ADC_TR1_AWDFILT_Msk (0x7UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00007000 */ +#define ADC_TR1_AWDFILT ADC_TR1_AWDFILT_Msk /*!< ADC analog watchdog filtering parameter */ +#define ADC_TR1_AWDFILT_0 (0x1UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00001000 */ +#define ADC_TR1_AWDFILT_1 (0x2UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00002000 */ +#define ADC_TR1_AWDFILT_2 (0x4UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00004000 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL<< ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ + +#define ADC_OFR1_OFFSETPOS_Pos (24U) +#define ADC_OFR1_OFFSETPOS_Msk (0x1UL << ADC_OFR1_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSETPOS ADC_OFR1_OFFSETPOS_Msk /*!< ADC offset number 1 positive */ +#define ADC_OFR1_SATEN_Pos (25U) +#define ADC_OFR1_SATEN_Msk (0x1UL << ADC_OFR1_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR1_SATEN ADC_OFR1_SATEN_Msk /*!< ADC offset number 1 saturation enable */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ + +#define ADC_OFR2_OFFSETPOS_Pos (24U) +#define ADC_OFR2_OFFSETPOS_Msk (0x1UL << ADC_OFR2_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSETPOS ADC_OFR2_OFFSETPOS_Msk /*!< ADC offset number 2 positive */ +#define ADC_OFR2_SATEN_Pos (25U) +#define ADC_OFR2_SATEN_Msk (0x1UL << ADC_OFR2_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR2_SATEN ADC_OFR2_SATEN_Msk /*!< ADC offset number 2 saturation enable */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ + +#define ADC_OFR3_OFFSETPOS_Pos (24U) +#define ADC_OFR3_OFFSETPOS_Msk (0x1UL << ADC_OFR3_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSETPOS ADC_OFR3_OFFSETPOS_Msk /*!< ADC offset number 3 positive */ +#define ADC_OFR3_SATEN_Pos (25U) +#define ADC_OFR3_SATEN_Msk (0x1UL << ADC_OFR3_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR3_SATEN ADC_OFR3_SATEN_Msk /*!< ADC offset number 3 saturation enable */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ + +#define ADC_OFR4_OFFSETPOS_Pos (24U) +#define ADC_OFR4_OFFSETPOS_Msk (0x1UL << ADC_OFR4_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSETPOS ADC_OFR4_OFFSETPOS_Msk /*!< ADC offset number 4 positive */ +#define ADC_OFR4_SATEN_Pos (25U) +#define ADC_OFR4_SATEN_Msk (0x1UL << ADC_OFR4_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR4_SATEN ADC_OFR4_SATEN_Msk /*!< ADC offset number 4 saturation enable */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000030 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00300000 */ + +/******************** Bit definition for ADC_OR register ***************/ +#define ADC_OR_OP0_Pos (0U) +#define ADC_OR_OP0_Msk (0x1UL << ADC_OR_OP0_Pos) /*!< 0x00000001 */ +#define ADC_OR_OP0 ADC_OR_OP0_Msk /*!< ADC internal path to VDDCORE */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register *******************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ + +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ + +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************************************************************************/ +/* */ +/* AXIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AXIM_ASIB_FNMOD2 register **********/ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_ASIB_READQOS register ********/ +#define AXIM_ASIB_READQOS_AR_QOS_Pos (0U) +#define AXIM_ASIB_READQOS_AR_QOS_Msk (0xFUL << AXIM_ASIB_READQOS_AR_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_READQOS_AR_QOS AXIM_ASIB_READQOS_AR_QOS_Msk /*!< Read channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_WRITEQOS register *******/ +#define AXIM_ASIB_WRITEQOS_AW_QOS_Pos (0U) +#define AXIM_ASIB_WRITEQOS_AW_QOS_Msk (0xFUL << AXIM_ASIB_WRITEQOS_AW_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_WRITEQOS_AW_QOS AXIM_ASIB_WRITEQOS_AW_QOS_Msk /*!< Write channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_FNMOD register **********/ +#define AXIM_ASIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_ASIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD_READ_ISS AXIM_ASIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_ASIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS AXIM_ASIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMODBMISS register **********/ +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODBMISS_READ_ISS AXIM_AMIB_FNMODBMISS_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMOD2 register **********/ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_AMIB_FNMODLB register **********/ +#define AXIM_AMIB_FNMODLB_LONG_BURST_Pos (0U) +#define AXIM_AMIB_FNMODLB_LONG_BURST_Msk (0x1UL << AXIM_AMIB_FNMODLB_LONG_BURST_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODLB_LONG_BURST AXIM_AMIB_FNMODLB_LONG_BURST_Msk /*!< Long bursts can be generated */ + +/******************* Bit definition for AXIM_AMIB_FNMOD register **********/ +#define AXIM_AMIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD_READ_ISS AXIM_AMIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS AXIM_AMIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE ((0x16C8UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT ((0x14B8UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process protected exponentiation*/ +#define PKA_MODULAR_EXP_PROTECT_IN_MODULUS ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus to process protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_PHI ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input phi to process protected exponentiation */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_ERROR ((0x1298UL - PKA_RAM_OFFSET)>>2) /*!< Output error of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input curve prime order n number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input prime order n */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_POINT_CHECK_IN_MONTGOMERY_PARAM ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0x0FE8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0x0F28UL - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0x0FE0UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x1400UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1458UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x0468UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x04D0UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x0678UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x06D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0x12F8UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0x1350UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x10E0UL - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0x13A8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x0948UL - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x0B60UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xE78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic subtraction input data */ +#define PKA_ARITHMETIC_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic subtraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular subtraction input data */ +#define PKA_MODULAR_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular subtraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result for arithmetic operations */ + +/* Compute ECC complete addition input data */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC complete addition output data */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Output result Z coordinate */ + +/* Compute ECC double base ladder input data */ +#define PKA_ECC_DOUBLE_LADDER_IN_PRIME_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input 'm' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC double base ladder output data */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_ERROR ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Compute ECC projective to affine conversion input data */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P X coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Y coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Z coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2 ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Compute ECC projective to affine conversion output data */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result x affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result y affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + + +/******************************************************************************/ +/* */ +/* Parallel Synchronous Slave Interface (PSSI ) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PSSI_CR register *******************/ +#define PSSI_CR_CKPOL_Pos (5U) +#define PSSI_CR_CKPOL_Msk (0x1UL << PSSI_CR_CKPOL_Pos) /*!< 0x00000020 */ +#define PSSI_CR_CKPOL PSSI_CR_CKPOL_Msk /*!< Parallel data clock polarity */ +#define PSSI_CR_DEPOL_Pos (6U) +#define PSSI_CR_DEPOL_Msk (0x1UL << PSSI_CR_DEPOL_Pos) /*!< 0x00000040 */ +#define PSSI_CR_DEPOL PSSI_CR_DEPOL_Msk /*!< Data enable polarity */ +#define PSSI_CR_RDYPOL_Pos (8U) +#define PSSI_CR_RDYPOL_Msk (0x1UL << PSSI_CR_RDYPOL_Pos) /*!< 0x00000100 */ +#define PSSI_CR_RDYPOL PSSI_CR_RDYPOL_Msk /*!< Ready polarity */ +#define PSSI_CR_EDM_Pos (10U) +#define PSSI_CR_EDM_Msk (0x3UL << PSSI_CR_EDM_Pos) /*!< 0x00000C00 */ +#define PSSI_CR_EDM PSSI_CR_EDM_Msk /*!< Extended data mode */ +#define PSSI_CR_ENABLE_Pos (14U) +#define PSSI_CR_ENABLE_Msk (0x1UL << PSSI_CR_ENABLE_Pos) /*!< 0x00004000 */ +#define PSSI_CR_ENABLE PSSI_CR_ENABLE_Msk /*!< PSSI enable */ +#define PSSI_CR_DERDYCFG_Pos (18U) +#define PSSI_CR_DERDYCFG_Msk (0x7UL << PSSI_CR_DERDYCFG_Pos) /*!< 0x001C0000 */ +#define PSSI_CR_DERDYCFG PSSI_CR_DERDYCFG_Msk /*!< Data enable and ready configuration */ +#define PSSI_CR_CKSRC_Pos (29U) +#define PSSI_CR_CKSRC_Msk (0x1UL << PSSI_CR_CKSRC_Pos) /*!< 0x20000000 */ +#define PSSI_CR_CKSRC PSSI_CR_CKSRC_Msk /*!< Clock source */ +#define PSSI_CR_DMAEN_Pos (30U) +#define PSSI_CR_DMAEN_Msk (0x1UL << PSSI_CR_DMAEN_Pos) /*!< 0x40000000 */ +#define PSSI_CR_DMAEN PSSI_CR_DMAEN_Msk /*!< DMA enable */ +#define PSSI_CR_OUTEN_Pos (31U) +#define PSSI_CR_OUTEN_Msk (0x1UL << PSSI_CR_OUTEN_Pos) /*!< 0x80000000 */ +#define PSSI_CR_OUTEN PSSI_CR_OUTEN_Msk /*!< Data direction selection */ + +/******************** Bit definition for PSSI_SR register *******************/ +#define PSSI_SR_RTT4B_Pos (2U) +#define PSSI_SR_RTT4B_Msk (0x1UL << PSSI_SR_RTT4B_Pos) /*!< 0x00000004 */ +#define PSSI_SR_RTT4B PSSI_SR_RTT4B_Msk /*!< Ready to transfer four bytes */ +#define PSSI_SR_RTT1B_Pos (3U) +#define PSSI_SR_RTT1B_Msk (0x1UL << PSSI_SR_RTT1B_Pos) /*!< 0x00000008 */ +#define PSSI_SR_RTT1B PSSI_SR_RTT1B_Msk /*!< Ready to transfer one byte */ + +/******************** Bit definition for PSSI_RIS register ******************/ +#define PSSI_RIS_OVR_RIS_Pos (1U) +#define PSSI_RIS_OVR_RIS_Msk (0x1UL << PSSI_RIS_OVR_RIS_Pos) /*!< 0x00000002 */ +#define PSSI_RIS_OVR_RIS PSSI_RIS_OVR_RIS_Msk /*!< Data buffer overrun/underrun raw interrupt status */ + +/******************** Bit definition for PSSI_IER register ******************/ +#define PSSI_IER_OVR_IE_Pos (1U) +#define PSSI_IER_OVR_IE_Msk (0x1UL << PSSI_IER_OVR_IE_Pos) /*!< 0x00000002 */ +#define PSSI_IER_OVR_IE PSSI_IER_OVR_IE_Msk /*!< Data buffer overrun/underrun interrupt enable */ + +/******************** Bit definition for PSSI_MIS register ******************/ +#define PSSI_MIS_OVR_MIS_Pos (1U) +#define PSSI_MIS_OVR_MIS_Msk (0x1UL << PSSI_MIS_OVR_MIS_Pos) /*!< 0x00000002 */ +#define PSSI_MIS_OVR_MIS PSSI_MIS_OVR_MIS_Msk /*!< Data buffer overrun/underrun masked interrupt status */ + +/******************** Bit definition for PSSI_ICR register ******************/ +#define PSSI_ICR_OVR_ISC_Pos (1U) +#define PSSI_ICR_OVR_ISC_Msk (0x1UL << PSSI_ICR_OVR_ISC_Pos) /*!< 0x00000002 */ +#define PSSI_ICR_OVR_ISC PSSI_ICR_OVR_ISC_Msk /*!< Data buffer overrun/underrun interrupt status clear */ + +/******************** Bit definition for PSSI_DR register *******************/ +#define PSSI_DR_DR_Pos (0U) +#define PSSI_DR_DR_Msk (0xFFFFFFFFUL << PSSI_DR_DR_Pos) /*!< 0xFFFFFFF */ +#define PSSI_DR_DR PSSI_DR_DR_Msk /*!< Data register */ + + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PWR_CR1 register *******************/ +#define PWR_CR1_SVOS_Pos (0U) +#define PWR_CR1_SVOS_Msk (0x1UL << PWR_CR1_SVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_SVOS PWR_CR1_SVOS_Msk /*!< System STOP mode Voltage Scaling selection. */ + +#define PWR_CR1_PVDE_Pos (4U) +#define PWR_CR1_PVDE_Msk (0x1UL << PWR_CR1_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR1_PVDE PWR_CR1_PVDE_Msk /*!< Programmable Voltage detector enable. */ + +#define PWR_CR1_PLS_Pos (5U) +#define PWR_CR1_PLS_Msk (0x7UL << PWR_CR1_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR1_PLS PWR_CR1_PLS_Msk /*!< Programmable Voltage Detector level selection */ +#define PWR_CR1_PLS_0 (0x1UL << PWR_CR1_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_PLS_1 (0x2UL << PWR_CR1_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR1_PLS_2 (0x4UL << PWR_CR1_PLS_Pos) /*!< 0x00000080 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Back-up domain Protection */ + +#define PWR_CR1_FLPS_Pos (9U) +#define PWR_CR1_FLPS_Msk (0x1UL << PWR_CR1_FLPS_Pos) /*!< 0x00000200 */ +#define PWR_CR1_FLPS PWR_CR1_FLPS_Msk /*!< Flash low power mode in STOP */ + +#define PWR_CR1_BOOSTE_Pos (11U) +#define PWR_CR1_BOOSTE_Msk (0x1UL << PWR_CR1_BOOSTE_Pos) /*!< 0x00000800 */ +#define PWR_CR1_BOOSTE PWR_CR1_BOOSTE_Msk /*!< Analog Switch VBoost control. */ + +#define PWR_CR1_AVDREADY_Pos (12) +#define PWR_CR1_AVDREADY_Msk (0x1UL << PWR_CR1_AVDREADY_Pos) /*!< 0x00001000 */ +#define PWR_CR1_AVDREADY PWR_CR1_AVDREADY_Msk /*!< Analog Voltage Ready. */ + +#define PWR_CR1_AVDEN_Pos (13U) +#define PWR_CR1_AVDEN_Msk (0x1UL << PWR_CR1_AVDEN_Pos) /*!< 0x00002000 */ +#define PWR_CR1_AVDEN PWR_CR1_AVDEN_Msk /*!< Analog Voltage Detector Enable */ + +#define PWR_CR1_ALS_Pos (14U) +#define PWR_CR1_ALS_Msk (0x3UL << PWR_CR1_ALS_Pos) /*!< 0x0000A000 */ +#define PWR_CR1_ALS PWR_CR1_ALS_Msk /*!< Analog Voltage Detector level selection */ +#define PWR_CR1_ALS_0 (0x1UL << PWR_CR1_ALS_Pos) /*!< 0x00004000 */ +#define PWR_CR1_ALS_1 (0x2UL << PWR_CR1_ALS_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_ACTVOS_Pos (0U) +#define PWR_SR1_ACTVOS_Msk (0x1UL << PWR_SR1_ACTVOS_Pos) /*!< 0x00000001 */ +#define PWR_SR1_ACTVOS PWR_SR1_ACTVOS_Msk /*!< VOS currently applied for VCORE voltage scaling selection */ + +#define PWR_SR1_ACTVOSRDY_Pos (1U) +#define PWR_SR1_ACTVOSRDY_Msk (0x1UL << PWR_SR1_ACTVOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_SR1_ACTVOSRDY PWR_SR1_ACTVOSRDY_Msk /*!< Ready bit for current actual used VOS for VDD11 Voltage Scaling */ + +#define PWR_SR1_PVDO_Pos (4U) +#define PWR_SR1_PVDO_Msk (0x1UL << PWR_SR1_PVDO_Pos) /*!< 0x00000010 */ +#define PWR_SR1_PVDO PWR_SR1_PVDO_Msk /*!< Programmable Voltage Detect Output */ + +#define PWR_SR1_AVDO_Pos (13U) +#define PWR_SR1_AVDO_Msk (0x1UL << PWR_SR1_AVDO_Pos) /*!< 0x00002000 */ +#define PWR_SR1_AVDO PWR_SR1_AVDO_Msk /*!< Analog Voltage Detect Output on VDDA */ + +/******************** Bit definition for PWR_CSR1 register ********************/ +#define PWR_CSR1_BREN_Pos (0U) +#define PWR_CSR1_BREN_Msk (0x1UL << PWR_CSR1_BREN_Pos) /*!< 0x00000001 */ +#define PWR_CSR1_BREN PWR_CSR1_BREN_Msk /*!< Backup regulator enable */ + +#define PWR_CSR1_MONEN_Pos (4U) +#define PWR_CSR1_MONEN_Msk (0x1UL << PWR_CSR1_MONEN_Pos) /*!< 0x00000010 */ +#define PWR_CSR1_MONEN PWR_CSR1_MONEN_Msk /*!< VBAT and temperature monitoring enable */ + +#define PWR_CSR1_BRRDY_Pos (16U) +#define PWR_CSR1_BRRDY_Msk (0x1UL << PWR_CSR1_BRRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR1_BRRDY PWR_CSR1_BRRDY_Msk /*!< Backup regulator ready */ + +#define PWR_CSR1_VBATL_Pos (20U) +#define PWR_CSR1_VBATL_Msk (0x1UL << PWR_CSR1_VBATL_Pos) /*!< 0x00100000 */ +#define PWR_CSR1_VBATL PWR_CSR1_VBATL_Msk /*!< Monitored VBAT level above low threshold */ + +#define PWR_CSR1_VBATH_Pos (21U) +#define PWR_CSR1_VBATH_Msk (0x1UL << PWR_CSR1_VBATH_Pos) /*!< 0x00200000 */ +#define PWR_CSR1_VBATH PWR_CSR1_VBATH_Msk /*!< Monitored VBAT level above high threshold */ + +#define PWR_CSR1_TEMPL_Pos (22U) +#define PWR_CSR1_TEMPL_Msk (0x1UL << PWR_CSR1_TEMPL_Pos) /*!< 0x00400000 */ +#define PWR_CSR1_TEMPL PWR_CSR1_TEMPL_Msk /*!< Monitored temperature level above low threshold */ + +#define PWR_CSR1_TEMPH_Pos (23U) +#define PWR_CSR1_TEMPH_Msk (0x1UL << PWR_CSR1_TEMPH_Pos) /*!< 0x00800000 */ +#define PWR_CSR1_TEMPH PWR_CSR1_TEMPH_Msk /*!< Monitored temperature level above high threshold */ + +/******************** Bit definition for PWR_CSR2 register ********************/ +#define PWR_CSR2_BYPASS_Pos (0U) +#define PWR_CSR2_BYPASS_Msk (0x1UL << PWR_CSR2_BYPASS_Pos) /*!< 0x00000001 */ +#define PWR_CSR2_BYPASS PWR_CSR2_BYPASS_Msk /*!< Power Management Unit bypass */ + +#define PWR_CSR2_LDOEN_Pos (1U) +#define PWR_CSR2_LDOEN_Msk (0x1UL << PWR_CSR2_LDOEN_Pos) /*!< 0x00000002 */ +#define PWR_CSR2_LDOEN PWR_CSR2_LDOEN_Msk /*!< Low Drop-Out regulator enable */ + +#define PWR_CSR2_SDEN_Pos (2U) +#define PWR_CSR2_SDEN_Msk (0x1UL << PWR_CSR2_SDEN_Pos) /*!< 0x00000004 */ +#define PWR_CSR2_SDEN PWR_CSR2_SDEN_Msk /*!< SMPS Step-down converter enable */ + +#define PWR_CSR2_SMPSEXTHP_Pos (3U) +#define PWR_CSR2_SMPSEXTHP_Msk (0x1UL << PWR_CSR2_SMPSEXTHP_Pos) /*!< 0x00000008 */ +#define PWR_CSR2_SMPSEXTHP PWR_CSR2_SMPSEXTHP_Msk /*!< SMPS external power delivery selection */ + +#define PWR_CSR2_SDHILEVEL_Pos (4U) +#define PWR_CSR2_SDHILEVEL_Msk (0x1UL << PWR_CSR2_SDHILEVEL_Pos) /*!< 0x00000030 */ +#define PWR_CSR2_SDHILEVEL PWR_CSR2_SDHILEVEL_Msk /*!< SMPS step-down converter voltage output for LDO or external supply */ + +#define PWR_CSR2_VBE_Pos (8U) +#define PWR_CSR2_VBE_Msk (0x1UL << PWR_CSR2_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CSR2_VBE PWR_CSR2_VBE_Msk /*!< VBAT charging enable */ + +#define PWR_CSR2_VBRS_Pos (9U) +#define PWR_CSR2_VBRS_Msk (0x1UL << PWR_CSR2_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CSR2_VBRS PWR_CSR2_VBRS_Msk /*!< VBAT charging resistor selection */ + +#define PWR_CSR2_XSPICAP1_Pos (10U) +#define PWR_CSR2_XSPICAP1_Msk (0x3UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000C00 */ +#define PWR_CSR2_XSPICAP1 PWR_CSR2_XSPICAP1_Msk /*!< XSPI port 1 capacitor control bits */ +#define PWR_CSR2_XSPICAP1_0 (0x1UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000400 */ +#define PWR_CSR2_XSPICAP1_1 (0x2UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000800 */ + +#define PWR_CSR2_XSPICAP2_Pos (12U) +#define PWR_CSR2_XSPICAP2_Msk (0x3UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00003000 */ +#define PWR_CSR2_XSPICAP2 PWR_CSR2_XSPICAP2_Msk /*!< XSPI port 2 capacitor control bits */ +#define PWR_CSR2_XSPICAP2_0 (0x1UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00001000 */ +#define PWR_CSR2_XSPICAP2_1 (0x2UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00002000 */ + +#define PWR_CSR2_EN_XSPIM1_Pos (14U) +#define PWR_CSR2_EN_XSPIM1_Msk (0x1UL << PWR_CSR2_EN_XSPIM1_Pos) /*!< 0x00004000 */ +#define PWR_CSR2_EN_XSPIM1 PWR_CSR2_EN_XSPIM1_Msk /*!< XSPIM1 external supply enable */ + +#define PWR_CSR2_EN_XSPIM2_Pos (15U) +#define PWR_CSR2_EN_XSPIM2_Msk (0x1UL << PWR_CSR2_EN_XSPIM2_Pos) /*!< 0x00008000 */ +#define PWR_CSR2_EN_XSPIM2 PWR_CSR2_EN_XSPIM2_Msk /*!< XSPIM2 external supply enable */ + +#define PWR_CSR2_SDEXTRDY_Pos (16U) +#define PWR_CSR2_SDEXTRDY_Msk (0x1UL << PWR_CSR2_SDEXTRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR2_SDEXTRDY PWR_CSR2_SDEXTRDY_Msk /*!< SMPS External supply ready */ + +#define PWR_CSR2_USB33DEN_Pos (24U) +#define PWR_CSR2_USB33DEN_Msk (0x1UL << PWR_CSR2_USB33DEN_Pos) /*!< 0x01000000 */ +#define PWR_CSR2_USB33DEN PWR_CSR2_USB33DEN_Msk /*!< VDD33_USB voltage level detector enable */ + +#define PWR_CSR2_USBREGEN_Pos (25U) +#define PWR_CSR2_USBREGEN_Msk (0x1UL << PWR_CSR2_USBREGEN_Pos) /*!< 0x02000000 */ +#define PWR_CSR2_USBREGEN PWR_CSR2_USBREGEN_Msk /*!< USB regulator enable */ + +#define PWR_CSR2_USB33RDY_Pos (26U) +#define PWR_CSR2_USB33RDY_Msk (0x1UL << PWR_CSR2_USB33RDY_Pos) /*!< 0x04000000 */ +#define PWR_CSR2_USB33RDY PWR_CSR2_USB33RDY_Msk /*!< USB supply ready */ + +#define PWR_CSR2_USBHSREGEN_Pos (27U) +#define PWR_CSR2_USBHSREGEN_Msk (0x1UL << PWR_CSR2_USBHSREGEN_Pos) /*!< 0x08000000 */ +#define PWR_CSR2_USBHSREGEN PWR_CSR2_USBHSREGEN_Msk /*!< USB HS regulator enable */ + +/******************** Bit definition for PWR_CSR3 register ********************/ +#define PWR_CSR3_PDDS_Pos (0U) +#define PWR_CSR3_PDDS_Msk (0x1UL << PWR_CSR3_PDDS_Pos) /*!< 0x00000001 */ +#define PWR_CSR3_PDDS PWR_CSR3_PDDS_Msk /*!< D1 domain Power Down Deepsleep */ + +#define PWR_CSR3_CSSF_Pos (1U) +#define PWR_CSR3_CSSF_Msk (0x1UL << PWR_CSR3_CSSF_Pos) /*!< 0x00000002 */ +#define PWR_CSR3_CSSF PWR_CSR3_CSSF_Msk /*!< Clear Standby and Stop flag */ + +#define PWR_CSR3_STOPF_Pos (8U) +#define PWR_CSR3_STOPF_Msk (0x1UL << PWR_CSR3_STOPF_Pos) /*!< 0x00000080 */ +#define PWR_CSR3_STOPF PWR_CSR3_STOPF_Msk /*!< STOP Flag */ + +#define PWR_CSR3_SBF_Pos (9U) +#define PWR_CSR3_SBF_Msk (0x1UL << PWR_CSR3_SBF_Pos) /*!< 0x00000100 */ +#define PWR_CSR3_SBF PWR_CSR3_SBF_Msk /*!< System STANDBY Flag */ + +/******************** Bit definition for PWR_CSR4 register ********************/ +#define PWR_CSR4_VOS_Pos (0U) +#define PWR_CSR4_VOS_Msk (0x1UL << PWR_CSR4_VOS_Pos) /*!< 0x00000001 */ +#define PWR_CSR4_VOS PWR_CSR4_VOS_Msk /*!< Voltage Scaling selection according performance */ + +#define PWR_CSR4_VOSRDY_Pos (1U) +#define PWR_CSR4_VOSRDY_Msk (0x1UL << PWR_CSR4_VOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_CSR4_VOSRDY PWR_CSR4_VOSRDY_Msk /*!< VOSRDY: VOS Ready bit for VCORE voltage scaling output selection. */ + +/******************** Bit definition for PWR_WKUPCR register ********************/ +#define PWR_WKUPCR_WKUPC_Pos (0U) +#define PWR_WKUPCR_WKUPC_Msk (0xFUL << PWR_WKUPCR_WKUPC_Pos) /*!< 0x0000000F */ +#define PWR_WKUPCR_WKUPC PWR_WKUPCR_WKUPC_Msk /*!< Clear Wakeup Pin Flag 1 to 4 */ +#define PWR_WKUPCR_WKUPC1_Pos (0U) +#define PWR_WKUPCR_WKUPC1_Msk (0x1UL << PWR_WKUPCR_WKUPC1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1_Msk /*!< Clear Wakeup Pin Flag 1 */ +#define PWR_WKUPCR_WKUPC2_Pos (1U) +#define PWR_WKUPCR_WKUPC2_Msk (0x1UL << PWR_WKUPCR_WKUPC2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2_Msk /*!< Clear Wakeup Pin Flag 2 */ +#define PWR_WKUPCR_WKUPC3_Pos (2U) +#define PWR_WKUPCR_WKUPC3_Msk (0x1UL << PWR_WKUPCR_WKUPC3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3_Msk /*!< Clear Wakeup Pin Flag 3 */ +#define PWR_WKUPCR_WKUPC4_Pos (3U) +#define PWR_WKUPCR_WKUPC4_Msk (0x1UL << PWR_WKUPCR_WKUPC4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4_Msk /*!< Clear Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPFR register ********************/ +#define PWR_WKUPFR_WKUPF1_Pos (0U) +#define PWR_WKUPFR_WKUPF1_Msk (0x1UL << PWR_WKUPFR_WKUPF1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1_Msk /*!< Wakeup Pin Flag 1 */ +#define PWR_WKUPFR_WKUPF2_Pos (1U) +#define PWR_WKUPFR_WKUPF2_Msk (0x1UL << PWR_WKUPFR_WKUPF2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2_Msk /*!< Wakeup Pin Flag 2 */ +#define PWR_WKUPFR_WKUPF3_Pos (2U) +#define PWR_WKUPFR_WKUPF3_Msk (0x1UL << PWR_WKUPFR_WKUPF3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3_Msk /*!< Wakeup Pin Flag 3 */ +#define PWR_WKUPFR_WKUPF4_Pos (3U) +#define PWR_WKUPFR_WKUPF4_Msk (0x1UL << PWR_WKUPFR_WKUPF4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4_Msk /*!< Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPEPR register ********************/ +#define PWR_WKUPEPR_WKUPEN_Pos (0U) +#define PWR_WKUPEPR_WKUPEN_Msk (0x0FUL << PWR_WKUPEPR_WKUPEN_Pos) /*!< 0x0000000F */ +#define PWR_WKUPEPR_WKUPEN PWR_WKUPEPR_WKUPEN_Msk /*!< Enable all Wakeup Pin */ +#define PWR_WKUPEPR_WKUPEN1_Pos (0U) +#define PWR_WKUPEPR_WKUPEN1_Msk (0x1UL << PWR_WKUPEPR_WKUPEN1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPEPR_WKUPEN1 PWR_WKUPEPR_WKUPEN1_Msk /*!< Enable Wakeup Pin WKUP1 */ +#define PWR_WKUPEPR_WKUPEN2_Pos (1U) +#define PWR_WKUPEPR_WKUPEN2_Msk (0x1UL << PWR_WKUPEPR_WKUPEN2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPEPR_WKUPEN2 PWR_WKUPEPR_WKUPEN2_Msk /*!< Enable Wakeup Pin WKUP2 */ +#define PWR_WKUPEPR_WKUPEN3_Pos (2U) +#define PWR_WKUPEPR_WKUPEN3_Msk (0x1UL << PWR_WKUPEPR_WKUPEN3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPEPR_WKUPEN3 PWR_WKUPEPR_WKUPEN3_Msk /*!< Enable Wakeup Pin WKUP3 */ +#define PWR_WKUPEPR_WKUPEN4_Pos (3U) +#define PWR_WKUPEPR_WKUPEN4_Msk (0x1UL << PWR_WKUPEPR_WKUPEN4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPEPR_WKUPEN4 PWR_WKUPEPR_WKUPEN4_Msk /*!< Enable Wakeup Pin WKUP4 */ + +#define PWR_WKUPEPR_WKUPP_Pos (8U) +#define PWR_WKUPEPR_WKUPP_Msk (0x0FUL << PWR_WKUPEPR_WKUPP_Pos) /*!< 0x0000F00 */ +#define PWR_WKUPEPR_WKUPP PWR_WKUPEPR_WKUPP_Msk /*!< Wakeup Pin Polarity for WKUP1 to WKUP4 */ +#define PWR_WKUPEPR_WKUPP1_Pos (8U) +#define PWR_WKUPEPR_WKUPP1_Msk (0x1UL << PWR_WKUPEPR_WKUPP1_Pos) /*!< 0x00000100 */ +#define PWR_WKUPEPR_WKUPP1 PWR_WKUPEPR_WKUPP1_Msk /*!< Wakeup Pin Polarity for WKUP1 */ +#define PWR_WKUPEPR_WKUPP2_Pos (9U) +#define PWR_WKUPEPR_WKUPP2_Msk (0x1UL << PWR_WKUPEPR_WKUPP2_Pos) /*!< 0x00000200 */ +#define PWR_WKUPEPR_WKUPP2 PWR_WKUPEPR_WKUPP2_Msk /*!< Wakeup Pin Polarity for WKUP2 */ +#define PWR_WKUPEPR_WKUPP3_Pos (10U) +#define PWR_WKUPEPR_WKUPP3_Msk (0x1UL << PWR_WKUPEPR_WKUPP3_Pos) /*!< 0x00000400 */ +#define PWR_WKUPEPR_WKUPP3 PWR_WKUPEPR_WKUPP3_Msk /*!< Wakeup Pin Polarity for WKUP3 */ +#define PWR_WKUPEPR_WKUPP4_Pos (11U) +#define PWR_WKUPEPR_WKUPP4_Msk (0x1UL << PWR_WKUPEPR_WKUPP4_Pos) /*!< 0x00000800 */ +#define PWR_WKUPEPR_WKUPP4 PWR_WKUPEPR_WKUPP4_Msk /*!< Wakeup Pin Polarity for WKUP4 */ + +#define PWR_WKUPEPR_WKUPPUPD1_Pos (16U) +#define PWR_WKUPEPR_WKUPPUPD1_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00030000 */ +#define PWR_WKUPEPR_WKUPPUPD1 PWR_WKUPEPR_WKUPPUPD1_Msk /*!< Wakeup Pin pull configuration for WKUP1 */ +#define PWR_WKUPEPR_WKUPPUPD1_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00010000 */ +#define PWR_WKUPEPR_WKUPPUPD1_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00020000 */ +#define PWR_WKUPEPR_WKUPPUPD2_Pos (18U) +#define PWR_WKUPEPR_WKUPPUPD2_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x000C0000 */ +#define PWR_WKUPEPR_WKUPPUPD2 PWR_WKUPEPR_WKUPPUPD2_Msk /*!< Wakeup Pin pull configuration for WKUP2 */ +#define PWR_WKUPEPR_WKUPPUPD2_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00040000 */ +#define PWR_WKUPEPR_WKUPPUPD2_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00080000 */ +#define PWR_WKUPEPR_WKUPPUPD3_Pos (20U) +#define PWR_WKUPEPR_WKUPPUPD3_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00300000 */ +#define PWR_WKUPEPR_WKUPPUPD3 PWR_WKUPEPR_WKUPPUPD3_Msk /*!< Wakeup Pin pull configuration for WKUP3 */ +#define PWR_WKUPEPR_WKUPPUPD3_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00100000 */ +#define PWR_WKUPEPR_WKUPPUPD3_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00200000 */ +#define PWR_WKUPEPR_WKUPPUPD4_Pos (22U) +#define PWR_WKUPEPR_WKUPPUPD4_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00C00000 */ +#define PWR_WKUPEPR_WKUPPUPD4 PWR_WKUPEPR_WKUPPUPD4_Msk /*!< Wakeup Pin pull configuration for WKUP4 */ +#define PWR_WKUPEPR_WKUPPUPD4_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00400000 */ +#define PWR_WKUPEPR_WKUPPUPD4_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for PWR_UCPDRR register ********************/ +#define PWR_UCPDR_UCPD_DBDIS_Pos (0U) +#define PWR_UCPDR_UCPD_DBDIS_Msk (0x1UL << PWR_UCPDR_UCPD_DBDIS_Pos) /*!< 0x00000001 */ +#define PWR_UCPDR_UCPD_DBDIS PWR_UCPDR_UCPD_DBDIS_Msk /*!< UCPD dead battery disable */ + +#define PWR_UCPDR_UCPD_STBY_Pos (1U) +#define PWR_UCPDR_UCPD_STBY_Msk (0x1UL << PWR_UCPDR_UCPD_STBY_Pos) /*!< 0x00000002 */ +#define PWR_UCPDR_UCPD_STBY PWR_UCPDR_UCPD_STBY_Msk /*!< UCPD Standby mode */ + +/******************** Bit definition for PWR_APCR register ********************/ +#define PWR_APCR_APC_Pos (0U) +#define PWR_APCR_APC_Msk (0x1UL << PWR_APCR_APC_Pos) /*!< 0x00000001 */ +#define PWR_APCR_APC PWR_APCR_APC_Msk /*!< Apply pull configuration register */ + +#define PWR_APCR_PN7_PUPD_Pos (16U) +#define PWR_APCR_PN7_PUPD_Msk (0x1UL << PWR_APCR_PN7_PUPD_Pos) /*!< 0x00010000 */ +#define PWR_APCR_PN7_PUPD PWR_APCR_PN7_PUPD_Msk /*!< Port N bit 7 pull-up/down configuration */ + +#define PWR_APCR_PO5_PUPD_Pos (17) +#define PWR_APCR_PO5_PUPD_Msk (0x1UL << PWR_APCR_PO5_PUPD_Pos) /*!< 0x00020000 */ +#define PWR_APCR_PO5_PUPD PWR_APCR_PO5_PUPD_Msk /*!< Port O bit 5 pull-up/down configuration */ + +#define PWR_APCR_I3CPB6_PU_Pos (28U) +#define PWR_APCR_I3CPB6_PU_Msk (0x1UL << PWR_APCR_I3CPB6_PU_Pos) /*!< 0x10000000 */ +#define PWR_APCR_I3CPB6_PU PWR_APCR_I3CPB6_PU_Msk /*!< Port PB6 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB7_PU_Pos (29U) +#define PWR_APCR_I3CPB7_PU_Msk (0x1UL << PWR_APCR_I3CPB7_PU_Pos) /*!< 0x20000000 */ +#define PWR_APCR_I3CPB7_PU PWR_APCR_I3CPB7_PU_Msk /*!< Port PB7 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB8_PU_Pos (30U) +#define PWR_APCR_I3CPB8_PU_Msk (0x1UL << PWR_APCR_I3CPB8_PU_Pos) /*!< 0x40000000 */ +#define PWR_APCR_I3CPB8_PU PWR_APCR_I3CPB8_PU_Msk /*!< Port PB8 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB9_PU_Pos (31U) +#define PWR_APCR_I3CPB9_PU_Msk (0x1UL << PWR_APCR_I3CPB9_PU_Pos) /*!< 0x80000000 */ +#define PWR_APCR_I3CPB9_PU PWR_APCR_I3CPB9_PU_Msk /*!< Port PB9 I3C pull-up bit configuration */ + +/******************** Bit definition for PWR_PUCRN register ********************/ +#define PWR_PUCRN_PUN1_Pos (1U) +#define PWR_PUCRN_PUN1_Msk (0x1UL << PWR_PUCRN_PUN1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRN_PUN1 PWR_PUCRN_PUN1_Msk /*!< PUN1: Port N pull-up */ + +#define PWR_PUCRN_PUN6_Pos (6U) +#define PWR_PUCRN_PUN6_Msk (0x1UL << PWR_PUCRN_PUN6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRN_PUN6 PWR_PUCRN_PUN6_Msk /*!< PUN6: Port N pull-up */ + +#define PWR_PUCRN_PUN12_Pos (12U) +#define PWR_PUCRN_PUN12_Msk (0x1UL << PWR_PUCRN_PUN12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRN_PUN12 PWR_PUCRN_PUN12_Msk /*!< PUN12: Port N pull-up */ + +/******************** Bit definition for PWR_PDCRN register ********************/ +#define PWR_PDCRN_PDN0_Pos (0U) +#define PWR_PDCRN_PDN0_Msk (0x1UL << PWR_PDCRN_PDN0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRN_PDN0 PWR_PDCRN_PDN0_Msk /*!< PDN0: Port N pull-down */ + +#define PWR_PDCRN_PDN1_Pos (1U) +#define PWR_PDCRN_PDN1_Msk (0x1UL << PWR_PDCRN_PDN1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRN_PDN1 PWR_PDCRN_PDN1_Msk /*!< PDN1: Port N pull-down */ + +#define PWR_PDCRN_PDN2N5_Pos (2U) +#define PWR_PDCRN_PDN2N5_Msk (0x1UL << PWR_PDCRN_PDN2N5_Pos) /*!< 0x00000004 */ +#define PWR_PDCRN_PDN2N5 PWR_PDCRN_PDN2N5_Msk /*!< PDN2 to PDN5: Port N pull-down */ + +#define PWR_PDCRN_PDN6_Pos (6U) +#define PWR_PDCRN_PDN6_Msk (0x1UL << PWR_PDCRN_PDN6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRN_PDN6 PWR_PDCRN_PDN6_Msk /*!< PDN6: Port N pull-down */ + +#define PWR_PDCRN_PDN8N11_Pos (8U) +#define PWR_PDCRN_PDN8N11_Msk (0x1UL << PWR_PDCRN_PDN8N11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRN_PDN8N11 PWR_PDCRN_PDN8N11_Msk /*!< PDN8 to PDN11: Port N pull-down */ + +#define PWR_PDCRN_PDN12_Pos (12U) +#define PWR_PDCRN_PDN12_Msk (0x1UL << PWR_PDCRN_PDN12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRN_PDN12 PWR_PDCRN_PDN12_Msk /*!< PDN12: Port N pull-down */ + +/******************** Bit definition for PWR_PUCRO register ********************/ +#define PWR_PUCRO_PUO0_Pos (0U) +#define PWR_PUCRO_PUO0_Msk (0x1UL << PWR_PUCRO_PUO0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRO_PUO0 PWR_PUCRO_PUO0_Msk /*!< PUO0: Port O pull-up */ + +#define PWR_PUCRO_PUO1_Pos (1U) +#define PWR_PUCRO_PUO1_Msk (0x1UL << PWR_PUCRO_PUO1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRO_PUO1 PWR_PUCRO_PUO1_Msk /*!< PUO1: Port O pull-up */ + +#define PWR_PUCRO_PUO4_Pos (4U) +#define PWR_PUCRO_PUO4_Msk (0x1UL << PWR_PUCRO_PUO4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRO_PUO4 PWR_PUCRO_PUO4_Msk /*!< PUO4: Port O pull-up */ + +/******************** Bit definition for PWR_PDCRO register ********************/ +#define PWR_PDCRO_PDO0_Pos (0U) +#define PWR_PDCRO_PDO0_Msk (0x1UL << PWR_PDCRO_PDO0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRO_PDO0 PWR_PDCRO_PDO0_Msk /*!< PDO0: Port O pull-down */ + +#define PWR_PDCRO_PDO1_Pos (1U) +#define PWR_PDCRO_PDO1_Msk (0x1UL << PWR_PDCRO_PDO1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRO_PDO1 PWR_PDCRO_PDO1_Msk /*!< PDO1: Port O pull-down */ + +#define PWR_PDCRO_PDO2_Pos (2U) +#define PWR_PDCRO_PDO2_Msk (0x1UL << PWR_PDCRO_PDO2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRO_PDO2 PWR_PDCRO_PDO2_Msk /*!< PDO2: Port O pull-down */ + +#define PWR_PDCRO_PDO3_Pos (3U) +#define PWR_PDCRO_PDO3_Msk (0x1UL << PWR_PDCRO_PDO3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRO_PDO3 PWR_PDCRO_PDO3_Msk /*!< PDO3: Port O pull-down */ + +#define PWR_PDCRO_PDO4_Pos (4U) +#define PWR_PDCRO_PDO4_Msk (0x1UL << PWR_PDCRO_PDO4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRO_PDO4 PWR_PDCRO_PDO4_Msk /*!< PDO4: Port O pull-down */ + +/******************** Bit definition for PWR_PDCRP register ********************/ +#define PWR_PDCRP_PDP0P3_Pos (0U) +#define PWR_PDCRP_PDP0P3_Msk (0x1UL << PWR_PDCRP_PDP0P3_Pos) /*!< 0x00000001 */ +#define PWR_PDCRP_PDP0P3 PWR_PDCRP_PDP0P3_Msk /*!< PPO0 to PP03 : Port P pull-down */ + +#define PWR_PDCRP_PDP4P7_Pos (4U) +#define PWR_PDCRP_PDP4P7_Msk (0x1UL << PWR_PDCRP_PDP4P7_Pos) /*!< 0x00000010 */ +#define PWR_PDCRP_PDP4P7 PWR_PDCRP_PDP4P7_Msk /*!< PPO4 to PP07 : Port P pull-down */ + +#define PWR_PDCRP_PDP8P11_Pos (8U) +#define PWR_PDCRP_PDP8P11_Msk (0x1UL << PWR_PDCRP_PDP8P11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRP_PDP8P11 PWR_PDCRP_PDP8P11_Msk /*!< PPO8 to PP11 : Port P pull-down */ + +#define PWR_PDCRP_PDP12P15_Pos (12U) +#define PWR_PDCRP_PDP12P15_Msk (0x1UL << PWR_PDCRP_PDP12P15_Pos) /*!< 0x00001000 */ +#define PWR_PDCRP_PDP12P15 PWR_PDCRP_PDP12P15_Msk /*!< PP12 to PP15 : Port P pull-down */ + + +/******************************************************************************/ +/* */ +/* RAM ECC monitoring */ +/* */ +/******************************************************************************/ +/****************** Bit definition for RAMECC_IER register ******************/ +#define RAMECC_IER_GIE_Pos (0U) +#define RAMECC_IER_GIE_Msk (0x1UL << RAMECC_IER_GIE_Pos) /*!< 0x00000001 */ +#define RAMECC_IER_GIE RAMECC_IER_GIE_Msk /*!< Global interrupt enable */ +#define RAMECC_IER_GECCSEIE_Pos (1U) +#define RAMECC_IER_GECCSEIE_Msk (0x1UL << RAMECC_IER_GECCSEIE_Pos) /*!< 0x00000002 */ +#define RAMECC_IER_GECCSEIE RAMECC_IER_GECCSEIE_Msk /*!< Global ECC single error interrupt enable */ +#define RAMECC_IER_GECCDEIE_Pos (2U) +#define RAMECC_IER_GECCDEIE_Msk (0x1UL << RAMECC_IER_GECCDEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_IER_GECCDEIE RAMECC_IER_GECCDEIE_Msk /*!< Global ECC double error interrupt enable */ +#define RAMECC_IER_GECCDEBWIE_Pos (3U) +#define RAMECC_IER_GECCDEBWIE_Msk (0x1UL << RAMECC_IER_GECCDEBWIE_Pos) /*!< 0x00000008 */ +#define RAMECC_IER_GECCDEBWIE RAMECC_IER_GECCDEBWIE_Msk /*!< Global ECC double error on byte write (BW) interrupt enable */ + +/******************* Bit definition for RAMECC_CR register ******************/ +#define RAMECC_CR_ECCSEIE_Pos (2U) +#define RAMECC_CR_ECCSEIE_Msk (0x1UL << RAMECC_CR_ECCSEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_CR_ECCSEIE RAMECC_CR_ECCSEIE_Msk /*!< ECC single error interrupt enable */ +#define RAMECC_CR_ECCDEIE_Pos (3U) +#define RAMECC_CR_ECCDEIE_Msk (0x1UL << RAMECC_CR_ECCDEIE_Pos) /*!< 0x00000008 */ +#define RAMECC_CR_ECCDEIE RAMECC_CR_ECCDEIE_Msk /*!< ECC double error interrupt enable */ +#define RAMECC_CR_ECCDEBWIE_Pos (4U) +#define RAMECC_CR_ECCDEBWIE_Msk (0x1UL << RAMECC_CR_ECCDEBWIE_Pos) /*!< 0x00000010 */ +#define RAMECC_CR_ECCDEBWIE RAMECC_CR_ECCDEBWIE_Msk /*!< ECC double error on byte write (BW) interrupt enable */ +#define RAMECC_CR_ECCELEN_Pos (5U) +#define RAMECC_CR_ECCELEN_Msk (0x1UL << RAMECC_CR_ECCELEN_Pos) /*!< 0x00000020 */ +#define RAMECC_CR_ECCELEN RAMECC_CR_ECCELEN_Msk /*!< ECC error latching enable */ + +/******************* Bit definition for RAMECC_SR register ******************/ +#define RAMECC_SR_SEDCF_Pos (0U) +#define RAMECC_SR_SEDCF_Msk (0x1UL << RAMECC_SR_SEDCF_Pos) /*!< 0x00000001 */ +#define RAMECC_SR_SEDCF RAMECC_SR_SEDCF_Msk /*!< ECC single error detected and corrected flag */ +#define RAMECC_SR_DEDF_Pos (1U) +#define RAMECC_SR_DEDF_Msk (0x1UL << RAMECC_SR_DEDF_Pos) /*!< 0x00000002 */ +#define RAMECC_SR_DEDF RAMECC_SR_DEDF_Msk /*!< ECC double error detected flag */ +#define RAMECC_SR_DEBWDF_Pos (2U) +#define RAMECC_SR_DEBWDF_Msk (0x1UL << RAMECC_SR_DEBWDF_Pos) /*!< 0x00000004 */ +#define RAMECC_SR_DEBWDF RAMECC_SR_DEBWDF_Msk /*!< ECC double error on byte write (BW) detected flag */ + +/****************** Bit definition for RAMECC_FAR register ******************/ +#define RAMECC_FAR_FADD_Pos (0U) +#define RAMECC_FAR_FADD_Msk (0xFFFFFFFFUL << RAMECC_FAR_FADD_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FAR_FADD RAMECC_FAR_FADD_Msk /*!< ECC error failing address */ + +/****************** Bit definition for RAMECC_FDRL register *****************/ +#define RAMECC_FDRL_FDATAL_Pos (0U) +#define RAMECC_FDRL_FDATAL_Msk (0xFFFFFFFFUL << RAMECC_FDRL_FDATAL_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRL_FDATAL RAMECC_FDRL_FDATAL_Msk /*!< Failing data low */ + +/****************** Bit definition for RAMECC_FDRH register *****************/ +#define RAMECC_FDRH_FDATAH_Pos (0U) +#define RAMECC_FDRH_FDATAH_Msk (0xFFFFFFFFUL << RAMECC_FDRH_FDATAH_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRH_FDATAH RAMECC_FDRH_FDATAH_Msk /* Failing data high (64-bit memory) */ + +/***************** Bit definition for RAMECC_FECR register ******************/ +#define RAMECC_FECR_FEC_Pos (0U) +#define RAMECC_FECR_FEC_Msk (0xFFFFFFFFUL << RAMECC_FECR_FEC_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FECR_FEC RAMECC_FECR_FEC_Msk /*!< Failing error code */ + + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIKERON_Pos (1U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed clock enable in Stop mode */ +#define RCC_CR_HSIRDY_Pos (2U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000004 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSIDIV_Pos (3U) +#define RCC_CR_HSIDIV_Msk (0x3UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000018 */ +#define RCC_CR_HSIDIV RCC_CR_HSIDIV_Msk /*!< Internal High Speed clock divider selection */ +#define RCC_CR_HSIDIV_0 (0x1UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000008 */ +#define RCC_CR_HSIDIV_1 (0x2UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000010 */ + +#define RCC_CR_HSIDIVF_Pos (5U) +#define RCC_CR_HSIDIVF_Msk (0x1UL << RCC_CR_HSIDIVF_Pos) /*!< 0x00000020 */ +#define RCC_CR_HSIDIVF RCC_CR_HSIDIVF_Msk /*!< HSI Divider flag */ +#define RCC_CR_CSION_Pos (7U) +#define RCC_CR_CSION_Msk (0x1UL << RCC_CR_CSION_Pos) /*!< 0x00000080 */ +#define RCC_CR_CSION RCC_CR_CSION_Msk /*!< The Internal RC 4MHz oscillator clock enable */ +#define RCC_CR_CSIRDY_Pos (8U) +#define RCC_CR_CSIRDY_Msk (0x1UL << RCC_CR_CSIRDY_Pos) /*!< 0x00000100 */ +#define RCC_CR_CSIRDY RCC_CR_CSIRDY_Msk /*!< The Internal RC 4MHz oscillator clock ready */ +#define RCC_CR_CSIKERON_Pos (9U) +#define RCC_CR_CSIKERON_Msk (0x1UL << RCC_CR_CSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_CSIKERON RCC_CR_CSIKERON_Msk /*!< Internal RC 4MHz oscillator clock enable in Stop mode */ +#define RCC_CR_HSI48ON_Pos (12U) +#define RCC_CR_HSI48ON_Msk (0x1UL << RCC_CR_HSI48ON_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSI48ON RCC_CR_HSI48ON_Msk /*!< HSI48 clock enable clock enable */ +#define RCC_CR_HSI48RDY_Pos (13U) +#define RCC_CR_HSI48RDY_Msk (0x1UL << RCC_CR_HSI48RDY_Pos) /*!< 0x00002000 */ +#define RCC_CR_HSI48RDY RCC_CR_HSI48RDY_Msk /*!< HSI48 clock ready flag */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock bypass */ +#define RCC_CR_HSEEXT_Pos (19U) +#define RCC_CR_HSEEXT_Msk (0x1UL << RCC_CR_HSEEXT_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEEXT RCC_CR_HSEEXT_Msk /*!< External High Speed clock type in bypass mode */ +#define RCC_CR_HSECSSON_Pos (20U) +#define RCC_CR_HSECSSON_Msk (0x1UL << RCC_CR_HSECSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_HSECSSON RCC_CR_HSECSSON_Msk /*!< HSE Clock security System enable */ +#define RCC_CR_PLL1ON_Pos (24U) +#define RCC_CR_PLL1ON_Msk (0x1UL << RCC_CR_PLL1ON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLL1ON RCC_CR_PLL1ON_Msk /*!< System PLL1 clock enable */ +#define RCC_CR_PLL1RDY_Pos (25U) +#define RCC_CR_PLL1RDY_Msk (0x1UL << RCC_CR_PLL1RDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLL1RDY RCC_CR_PLL1RDY_Msk /*!< System PLL1 clock ready flag */ +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< System PLL2 clock enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< System PLL2 clock ready flag */ +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< System PLL3 clock enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< System PLL3 clock ready flag */ + +/******************** Bit definition for RCC_HSICFGR register ***************/ +/*!< HSICAL configuration */ +#define RCC_HSICFGR_HSICAL_Pos (0U) +#define RCC_HSICFGR_HSICAL_Msk (0xFFFUL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000FFF */ +#define RCC_HSICFGR_HSICAL RCC_HSICFGR_HSICAL_Msk /*!< HSICAL[11:0] bits */ +#define RCC_HSICFGR_HSICAL_0 (0x001UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000001 */ +#define RCC_HSICFGR_HSICAL_1 (0x002UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000002 */ +#define RCC_HSICFGR_HSICAL_2 (0x004UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000004 */ +#define RCC_HSICFGR_HSICAL_3 (0x008UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000008 */ +#define RCC_HSICFGR_HSICAL_4 (0x010UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000010 */ +#define RCC_HSICFGR_HSICAL_5 (0x020UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000020 */ +#define RCC_HSICFGR_HSICAL_6 (0x040UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000040 */ +#define RCC_HSICFGR_HSICAL_7 (0x080UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000080 */ +#define RCC_HSICFGR_HSICAL_8 (0x100UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000100 */ +#define RCC_HSICFGR_HSICAL_9 (0x200UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000200 */ +#define RCC_HSICFGR_HSICAL_10 (0x400UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000400 */ +#define RCC_HSICFGR_HSICAL_11 (0x800UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000800 */ + +/*!< HSITRIM configuration */ +#define RCC_HSICFGR_HSITRIM_Pos (24U) +#define RCC_HSICFGR_HSITRIM_Msk (0x7FUL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_HSICFGR_HSITRIM RCC_HSICFGR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_HSICFGR_HSITRIM_0 (0x01UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_HSICFGR_HSITRIM_1 (0x02UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_HSICFGR_HSITRIM_2 (0x04UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_HSICFGR_HSITRIM_3 (0x08UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_HSICFGR_HSITRIM_4 (0x10UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_HSICFGR_HSITRIM_5 (0x20UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_HSICFGR_HSITRIM_6 (0x40UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CRRCR register *****************/ +/*!< HSI48CAL configuration */ +#define RCC_CRRCR_HSI48CAL_Pos (0U) +#define RCC_CRRCR_HSI48CAL_Msk (0x3FFUL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x000003FF */ +#define RCC_CRRCR_HSI48CAL RCC_CRRCR_HSI48CAL_Msk /*!< HSI48CAL[9:0] bits */ +#define RCC_CRRCR_HSI48CAL_0 (0x001UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000001 */ +#define RCC_CRRCR_HSI48CAL_1 (0x002UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000002 */ +#define RCC_CRRCR_HSI48CAL_2 (0x004UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000004 */ +#define RCC_CRRCR_HSI48CAL_3 (0x008UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000008 */ +#define RCC_CRRCR_HSI48CAL_4 (0x010UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000010 */ +#define RCC_CRRCR_HSI48CAL_5 (0x020UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000020 */ +#define RCC_CRRCR_HSI48CAL_6 (0x040UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000040 */ +#define RCC_CRRCR_HSI48CAL_7 (0x080UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000080 */ +#define RCC_CRRCR_HSI48CAL_8 (0x100UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000100 */ +#define RCC_CRRCR_HSI48CAL_9 (0x200UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_CSICFGR register ***************/ +/*!< CSICAL configuration */ +#define RCC_CSICFGR_CSICAL_Pos (0U) +#define RCC_CSICFGR_CSICAL_Msk (0xFFUL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x000000FF */ +#define RCC_CSICFGR_CSICAL RCC_CSICFGR_CSICAL_Msk /*!< CSICAL[7:0] bits */ +#define RCC_CSICFGR_CSICAL_0 (0x01UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000001 */ +#define RCC_CSICFGR_CSICAL_1 (0x02UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000002 */ +#define RCC_CSICFGR_CSICAL_2 (0x04UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000004 */ +#define RCC_CSICFGR_CSICAL_3 (0x08UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000008 */ +#define RCC_CSICFGR_CSICAL_4 (0x10UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000010 */ +#define RCC_CSICFGR_CSICAL_5 (0x20UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000020 */ +#define RCC_CSICFGR_CSICAL_6 (0x40UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000040 */ +#define RCC_CSICFGR_CSICAL_7 (0x80UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000080 */ + +/*!< CSITRIM configuration */ +#define RCC_CSICFGR_CSITRIM_Pos (24U) +#define RCC_CSICFGR_CSITRIM_Msk (0x3FUL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x3F000000 */ +#define RCC_CSICFGR_CSITRIM RCC_CSICFGR_CSITRIM_Msk /*!< CSITRIM[5:0] bits */ +#define RCC_CSICFGR_CSITRIM_0 (0x01UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_CSICFGR_CSITRIM_1 (0x02UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_CSICFGR_CSITRIM_2 (0x04UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_CSICFGR_CSITRIM_3 (0x08UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_CSICFGR_CSITRIM_4 (0x10UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_CSICFGR_CSITRIM_5 (0x20UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x7UL << RCC_CFGR_SW_Pos) /*!< 0x00000007 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[2:0] bits (System clock switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ +#define RCC_CFGR_SW_2 (0x4UL << RCC_CFGR_SW_Pos) /*!< 0x00000004 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (3U) +#define RCC_CFGR_SWS_Msk (0x7UL << RCC_CFGR_SWS_Pos) /*!< 0x00000038 */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[2:0] bits (System clock switch status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_SWS_2 (0x4UL << RCC_CFGR_SWS_Pos) /*!< 0x00000020 */ + +#define RCC_CFGR_STOPWUCK_Pos (6U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ +#define RCC_CFGR_STOPKERWUCK_Pos (7U) +#define RCC_CFGR_STOPKERWUCK_Msk (0x1UL << RCC_CFGR_STOPKERWUCK_Pos) /*!< 0x00000080 */ +#define RCC_CFGR_STOPKERWUCK RCC_CFGR_STOPKERWUCK_Msk /*!< Kernel Clock Selection after a Wake Up from Stop */ + +/*!< RTCPRE configuration */ +#define RCC_CFGR_RTCPRE_Pos (8U) +#define RCC_CFGR_RTCPRE_Msk (0x3FUL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00003F00 */ +#define RCC_CFGR_RTCPRE RCC_CFGR_RTCPRE_Msk /*!< RTCPRE[5:0] bits (HSE division factor for RTC clock) */ +#define RCC_CFGR_RTCPRE_0 (0x01UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_RTCPRE_1 (0x02UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_RTCPRE_2 (0x04UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000400 */ +#define RCC_CFGR_RTCPRE_3 (0x08UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_RTCPRE_4 (0x10UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_RTCPRE_5 (0x20UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_TIMPRE_Pos (15U) +#define RCC_CFGR_TIMPRE_Msk (0x1UL << RCC_CFGR_TIMPRE_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_TIMPRE RCC_CFGR_TIMPRE_Msk /*!< TIMPRE configuration */ + +#define RCC_CFGR_MCO1PRE_Pos (18U) +#define RCC_CFGR_MCO1PRE_Msk (0xFUL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_MCO1PRE RCC_CFGR_MCO1PRE_Msk /*!< MCO1 configuration */ +#define RCC_CFGR_MCO1PRE_0 (0x1UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_MCO1PRE_1 (0x2UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_MCO1PRE_2 (0x4UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_MCO1PRE_3 (0x8UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_MCO1SEL_Pos (22U) +#define RCC_CFGR_MCO1SEL_Msk (0x7UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01C00000 */ +#define RCC_CFGR_MCO1SEL RCC_CFGR_MCO1SEL_Msk /*!< MCO1SEL [2:0] bits (MCO1 clock output selection) */ +#define RCC_CFGR_MCO1SEL_0 (0x1UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_MCO1SEL_1 (0x2UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00800000 */ +#define RCC_CFGR_MCO1SEL_2 (0x4UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01000000 */ + +#define RCC_CFGR_MCO2PRE_Pos (25U) +#define RCC_CFGR_MCO2PRE_Msk (0xFUL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x1E000000 */ +#define RCC_CFGR_MCO2PRE RCC_CFGR_MCO2PRE_Msk /*!< MCO2 configuration */ +#define RCC_CFGR_MCO2PRE_0 (0x1UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO2PRE_1 (0x2UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO2PRE_2 (0x4UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x08000000 */ +#define RCC_CFGR_MCO2PRE_3 (0x8UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x10000000 */ + +#define RCC_CFGR_MCO2SEL_Pos (29U) +#define RCC_CFGR_MCO2SEL_Msk (0x7UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0xE0000000 */ +#define RCC_CFGR_MCO2SEL RCC_CFGR_MCO2SEL_Msk /*!< MCO2SEL [2:0] bits (MCO2 clock output selection) */ +#define RCC_CFGR_MCO2SEL_0 (0x1UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCO2SEL_1 (0x2UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x40000000 */ +#define RCC_CFGR_MCO2SEL_2 (0x4UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CDCFGR register ****************/ +/*!< CPRE configuration */ +#define RCC_CDCFGR_CPRE_Pos (0U) +#define RCC_CDCFGR_CPRE_Msk (0xFUL << RCC_CDCFGR_CPRE_Pos) /*!< 0x0000000F */ +#define RCC_CDCFGR_CPRE RCC_CDCFGR_CPRE_Msk /*!< CPRE[3:0] bits */ +#define RCC_CDCFGR_CPRE_0 (0x1UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000001 */ +#define RCC_CDCFGR_CPRE_1 (0x2UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000002 */ +#define RCC_CDCFGR_CPRE_2 (0x4UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000004 */ +#define RCC_CDCFGR_CPRE_3 (0x8UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_BMCFGR register ****************/ +/*!< BMPRE configuration */ +#define RCC_BMCFGR_BMPRE_Pos (0U) +#define RCC_BMCFGR_BMPRE_Msk (0xFUL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x0000000F */ +#define RCC_BMCFGR_BMPRE RCC_BMCFGR_BMPRE_Msk /*!< BMPRE[3:0] bits */ +#define RCC_BMCFGR_BMPRE_0 (0x1UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000001 */ +#define RCC_BMCFGR_BMPRE_1 (0x2UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000002 */ +#define RCC_BMCFGR_BMPRE_2 (0x4UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000004 */ +#define RCC_BMCFGR_BMPRE_3 (0x8UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_APBCFGR register ***************/ +/*!< APB1 prescaler configuration */ +#define RCC_APBCFGR_PPRE1_Pos (0U) +#define RCC_APBCFGR_PPRE1_Msk (0x7UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000007 */ +#define RCC_APBCFGR_PPRE1 RCC_APBCFGR_PPRE1_Msk /*!< PPRE1[2:0] bits */ +#define RCC_APBCFGR_PPRE1_0 (0x1UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000001 */ +#define RCC_APBCFGR_PPRE1_1 (0x2UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000002 */ +#define RCC_APBCFGR_PPRE1_2 (0x4UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000004 */ + +/*!< APB2 prescaler configuration */ +#define RCC_APBCFGR_PPRE2_Pos (4U) +#define RCC_APBCFGR_PPRE2_Msk (0x7UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000070 */ +#define RCC_APBCFGR_PPRE2 RCC_APBCFGR_PPRE2_Msk /*!< PPRE2[2:0] bits */ +#define RCC_APBCFGR_PPRE2_0 (0x1UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000010 */ +#define RCC_APBCFGR_PPRE2_1 (0x2UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000020 */ +#define RCC_APBCFGR_PPRE2_2 (0x4UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000040 */ + +/*!< APB4 prescaler configuration */ +#define RCC_APBCFGR_PPRE4_Pos (8U) +#define RCC_APBCFGR_PPRE4_Msk (0x7UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000700 */ +#define RCC_APBCFGR_PPRE4 RCC_APBCFGR_PPRE4_Msk /*!< PPRE4[2:0] bits */ +#define RCC_APBCFGR_PPRE4_0 (0x1UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000100 */ +#define RCC_APBCFGR_PPRE4_1 (0x2UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000200 */ +#define RCC_APBCFGR_PPRE4_2 (0x4UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000400 */ + +/*!< APB5 prescaler configuration */ +#define RCC_APBCFGR_PPRE5_Pos (12U) +#define RCC_APBCFGR_PPRE5_Msk (0x7UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00007000 */ +#define RCC_APBCFGR_PPRE5 RCC_APBCFGR_PPRE5_Msk /*!< PPRE5[2:0] bits */ +#define RCC_APBCFGR_PPRE5_0 (0x1UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00001000 */ +#define RCC_APBCFGR_PPRE5_1 (0x2UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00002000 */ +#define RCC_APBCFGR_PPRE5_2 (0x4UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_PLLCKSELR register *************/ +#define RCC_PLLCKSELR_PLLSRC_Pos (0U) +#define RCC_PLLCKSELR_PLLSRC_Msk (0x3UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCKSELR_PLLSRC RCC_PLLCKSELR_PLLSRC_Msk /*!< DIVMx and PLLs clock source selection */ +#define RCC_PLLCKSELR_PLLSRC_0 (0x01UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_PLLSRC_1 (0x02UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000020 */ + +#define RCC_PLLCKSELR_DIVM1_Pos (4U) +#define RCC_PLLCKSELR_DIVM1_Msk (0x3FUL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x000003F0 */ +#define RCC_PLLCKSELR_DIVM1 RCC_PLLCKSELR_DIVM1_Msk /*!< DIVM1[5:0] bits */ +#define RCC_PLLCKSELR_DIVM1_0 (0x01UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_DIVM1_1 (0x02UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000020 */ +#define RCC_PLLCKSELR_DIVM1_2 (0x04UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000040 */ +#define RCC_PLLCKSELR_DIVM1_3 (0x08UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000080 */ +#define RCC_PLLCKSELR_DIVM1_4 (0x10UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000100 */ +#define RCC_PLLCKSELR_DIVM1_5 (0x20UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000200 */ + +#define RCC_PLLCKSELR_DIVM2_Pos (12U) +#define RCC_PLLCKSELR_DIVM2_Msk (0x3FUL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x0003F000 */ +#define RCC_PLLCKSELR_DIVM2 RCC_PLLCKSELR_DIVM2_Msk /*!< DIVM2[5:0] bits */ +#define RCC_PLLCKSELR_DIVM2_0 (0x01UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00001000 */ +#define RCC_PLLCKSELR_DIVM2_1 (0x02UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00002000 */ +#define RCC_PLLCKSELR_DIVM2_2 (0x04UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00004000 */ +#define RCC_PLLCKSELR_DIVM2_3 (0x08UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00008000 */ +#define RCC_PLLCKSELR_DIVM2_4 (0x10UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00010000 */ +#define RCC_PLLCKSELR_DIVM2_5 (0x20UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00020000 */ + +#define RCC_PLLCKSELR_DIVM3_Pos (20U) +#define RCC_PLLCKSELR_DIVM3_Msk (0x3FUL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x03F00000 */ +#define RCC_PLLCKSELR_DIVM3 RCC_PLLCKSELR_DIVM3_Msk /*!< DIVM3[5:0] bits */ +#define RCC_PLLCKSELR_DIVM3_0 (0x01UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00100000 */ +#define RCC_PLLCKSELR_DIVM3_1 (0x02UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00200000 */ +#define RCC_PLLCKSELR_DIVM3_2 (0x04UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00400000 */ +#define RCC_PLLCKSELR_DIVM3_3 (0x08UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00800000 */ +#define RCC_PLLCKSELR_DIVM3_4 (0x10UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x01000000 */ +#define RCC_PLLCKSELR_DIVM3_5 (0x20UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLL1FRACEN_Pos (0U) +#define RCC_PLLCFGR_PLL1FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL1FRACEN_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLL1FRACEN RCC_PLLCFGR_PLL1FRACEN_Msk /*!< PLL1 fractional latch enable */ +#define RCC_PLLCFGR_PLL1VCOSEL_Pos (1U) +#define RCC_PLLCFGR_PLL1VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL1VCOSEL_Pos) /*!< 0x00000002 */ +#define RCC_PLLCFGR_PLL1VCOSEL RCC_PLLCFGR_PLL1VCOSEL_Msk /*!< PLL1 VCO selection */ +#define RCC_PLLCFGR_PLL1SSCGEN_Pos (2U) +#define RCC_PLLCFGR_PLL1SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SSCGEN_Pos) /*!< 0x00000004 */ +#define RCC_PLLCFGR_PLL1SSCGEN RCC_PLLCFGR_PLL1SSCGEN_Msk /*!< PLL1 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL1RGE_Pos (3U) +#define RCC_PLLCFGR_PLL1RGE_Msk (0x3UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000018 */ +#define RCC_PLLCFGR_PLL1RGE RCC_PLLCFGR_PLL1RGE_Msk /*!< PLL1RGE[1:0] bits: PLL1 input frequency range */ +#define RCC_PLLCFGR_PLL1RGE_0 (0x1UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000008 */ +#define RCC_PLLCFGR_PLL1RGE_1 (0x2UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000010 */ + +#define RCC_PLLCFGR_PLL1PEN_Pos (5U) +#define RCC_PLLCFGR_PLL1PEN_Msk (0x1UL << RCC_PLLCFGR_PLL1PEN_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLL1PEN RCC_PLLCFGR_PLL1PEN_Msk /*!< PLL1 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL1QEN_Pos (6U) +#define RCC_PLLCFGR_PLL1QEN_Msk (0x1UL << RCC_PLLCFGR_PLL1QEN_Pos) /*!< 0x00000040 */ +#define RCC_PLLCFGR_PLL1QEN RCC_PLLCFGR_PLL1QEN_Msk /*!< PLL1 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL1REN_Pos (7U) +#define RCC_PLLCFGR_PLL1REN_Msk (0x1UL << RCC_PLLCFGR_PLL1REN_Pos) /*!< 0x00000080 */ +#define RCC_PLLCFGR_PLL1REN RCC_PLLCFGR_PLL1REN_Msk /*!< PLL1 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL1SEN_Pos (8U) +#define RCC_PLLCFGR_PLL1SEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SEN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLL1SEN RCC_PLLCFGR_PLL1SEN_Msk /*!< PLL1 DIVS divider output enable */ + +#define RCC_PLLCFGR_PLL2FRACEN_Pos (11U) +#define RCC_PLLCFGR_PLL2FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL2FRACEN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLL2FRACEN RCC_PLLCFGR_PLL2FRACEN_Msk /*!< PLL2 fractional latch enable */ +#define RCC_PLLCFGR_PLL2VCOSEL_Pos (12U) +#define RCC_PLLCFGR_PLL2VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL2VCOSEL_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLL2VCOSEL RCC_PLLCFGR_PLL2VCOSEL_Msk /*!< PLL2 VCO selection */ +#define RCC_PLLCFGR_PLL2SSCGEN_Pos (13U) +#define RCC_PLLCFGR_PLL2SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SSCGEN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLL2SSCGEN RCC_PLLCFGR_PLL2SSCGEN_Msk /*!< PLL2 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL2RGE_Pos (14U) +#define RCC_PLLCFGR_PLL2RGE_Msk (0x3UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x0000C000 */ +#define RCC_PLLCFGR_PLL2RGE RCC_PLLCFGR_PLL2RGE_Msk /*!< PLL2RGE[1:0] bits: PLL2 input frequency range */ +#define RCC_PLLCFGR_PLL2RGE_0 (0x1UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00004000 */ +#define RCC_PLLCFGR_PLL2RGE_1 (0x2UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00008000 */ + +#define RCC_PLLCFGR_PLL2PEN_Pos (16U) +#define RCC_PLLCFGR_PLL2PEN_Msk (0x1UL << RCC_PLLCFGR_PLL2PEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLL2PEN RCC_PLLCFGR_PLL2PEN_Msk /*!< PLL2 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL2QEN_Pos (17U) +#define RCC_PLLCFGR_PLL2QEN_Msk (0x1UL << RCC_PLLCFGR_PLL2QEN_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLL2QEN RCC_PLLCFGR_PLL2QEN_Msk /*!< PLL2 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL2REN_Pos (18U) +#define RCC_PLLCFGR_PLL2REN_Msk (0x1UL << RCC_PLLCFGR_PLL2REN_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLL2REN RCC_PLLCFGR_PLL2REN_Msk /*!< PLL2 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL2SEN_Pos (19U) +#define RCC_PLLCFGR_PLL2SEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SEN_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLL2SEN RCC_PLLCFGR_PLL2SEN_Msk /*!< PLL2 DIVS divider output enable */ +#define RCC_PLLCFGR_PLL2TEN_Pos (20U) +#define RCC_PLLCFGR_PLL2TEN_Msk (0x1UL << RCC_PLLCFGR_PLL2TEN_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLL2TEN RCC_PLLCFGR_PLL2TEN_Msk /*!< PLL2 DIVT divider output enable */ + +#define RCC_PLLCFGR_PLL3FRACEN_Pos (22U) +#define RCC_PLLCFGR_PLL3FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL3FRACEN_Pos) /*!< 0x00400000 */ +#define RCC_PLLCFGR_PLL3FRACEN RCC_PLLCFGR_PLL3FRACEN_Msk /*!< PLL3 fractional latch enable */ +#define RCC_PLLCFGR_PLL3VCOSEL_Pos (23U) +#define RCC_PLLCFGR_PLL3VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL3VCOSEL_Pos) /*!< 0x00800000 */ +#define RCC_PLLCFGR_PLL3VCOSEL RCC_PLLCFGR_PLL3VCOSEL_Msk /*!< PLL3 VCO selection */ +#define RCC_PLLCFGR_PLL3SSCGEN_Pos (24U) +#define RCC_PLLCFGR_PLL3SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SSCGEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLL3SSCGEN RCC_PLLCFGR_PLL3SSCGEN_Msk /*!< PLL3 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL3RGE_Pos (25U) +#define RCC_PLLCFGR_PLL3RGE_Msk (0x3UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x06000000 */ +#define RCC_PLLCFGR_PLL3RGE RCC_PLLCFGR_PLL3RGE_Msk /*!< PLL3RGE[1:0] bits: PLL3 input frequency range */ +#define RCC_PLLCFGR_PLL3RGE_0 (0x1UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLL3RGE_1 (0x2UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x04000000 */ + +#define RCC_PLLCFGR_PLL3PEN_Pos (27U) +#define RCC_PLLCFGR_PLL3PEN_Msk (0x1UL << RCC_PLLCFGR_PLL3PEN_Pos) /*!< 0x08000000 */ +#define RCC_PLLCFGR_PLL3PEN RCC_PLLCFGR_PLL3PEN_Msk /*!< PLL3 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL3QEN_Pos (28U) +#define RCC_PLLCFGR_PLL3QEN_Msk (0x1UL << RCC_PLLCFGR_PLL3QEN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLL3QEN RCC_PLLCFGR_PLL3QEN_Msk /*!< PLL3 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL3REN_Pos (29U) +#define RCC_PLLCFGR_PLL3REN_Msk (0x1UL << RCC_PLLCFGR_PLL3REN_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLL3REN RCC_PLLCFGR_PLL3REN_Msk /*!< PLL3 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL3SEN_Pos (30U) +#define RCC_PLLCFGR_PLL3SEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SEN_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLL3SEN RCC_PLLCFGR_PLL3SEN_Msk /*!< PLL3 DIVS divider output enable */ + +/******************** Bit definition for RCC_PLL1DIVR1 register *************/ +#define RCC_PLL1DIVR1_DIVN_Pos (0U) +#define RCC_PLL1DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL1DIVR1_DIVN RCC_PLL1DIVR1_DIVN_Msk /*!< DIVN1[8:0] bits: PLL1 DIVN division factor */ +#define RCC_PLL1DIVR1_DIVN_0 (0x001UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR1_DIVN_1 (0x002UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR1_DIVN_2 (0x004UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL1DIVR1_DIVN_3 (0x008UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL1DIVR1_DIVN_4 (0x010UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL1DIVR1_DIVN_5 (0x020UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL1DIVR1_DIVN_6 (0x040UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL1DIVR1_DIVN_7 (0x080UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL1DIVR1_DIVN_8 (0x100UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL1DIVR1_DIVP_Pos (9U) +#define RCC_PLL1DIVR1_DIVP_Msk (0x7FUL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL1DIVR1_DIVP RCC_PLL1DIVR1_DIVP_Msk /*!< DIVP1[6:0] bits: PLL1 DIVP division factor */ +#define RCC_PLL1DIVR1_DIVP_0 (0x001UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL1DIVR1_DIVP_1 (0x002UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL1DIVR1_DIVP_2 (0x004UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL1DIVR1_DIVP_3 (0x008UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL1DIVR1_DIVP_4 (0x010UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL1DIVR1_DIVP_5 (0x020UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL1DIVR1_DIVP_6 (0x040UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL1DIVR1_DIVQ_Pos (16U) +#define RCC_PLL1DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL1DIVR1_DIVQ RCC_PLL1DIVR1_DIVQ_Msk /*!< DIVQ1[6:0] bits: PLL1 DIVQ division factor */ +#define RCC_PLL1DIVR1_DIVQ_0 (0x001UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL1DIVR1_DIVQ_1 (0x002UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL1DIVR1_DIVQ_2 (0x004UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL1DIVR1_DIVQ_3 (0x008UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL1DIVR1_DIVQ_4 (0x010UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL1DIVR1_DIVQ_5 (0x020UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL1DIVR1_DIVQ_6 (0x040UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL1DIVR1_DIVR_Pos (24U) +#define RCC_PLL1DIVR1_DIVR_Msk (0x7FUL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL1DIVR1_DIVR RCC_PLL1DIVR1_DIVR_Msk /*!< DIVR1[6:0] bits: PLL1 DIVR division factor */ +#define RCC_PLL1DIVR1_DIVR_0 (0x001UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL1DIVR1_DIVR_1 (0x002UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL1DIVR1_DIVR_2 (0x004UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL1DIVR1_DIVR_3 (0x008UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL1DIVR1_DIVR_4 (0x010UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL1DIVR1_DIVR_5 (0x020UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL1DIVR1_DIVR_6 (0x040UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL1FRACR register *************/ +#define RCC_PLL1FRACR_FRACN_Pos (3U) +#define RCC_PLL1FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL1FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL1FRACR_FRACN RCC_PLL1FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL2DIVR1 register *************/ +#define RCC_PLL2DIVR1_DIVN_Pos (0U) +#define RCC_PLL2DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL2DIVR1_DIVN RCC_PLL2DIVR1_DIVN_Msk /*!< DIVN2[8:0] bits: PLL2 DIVN division factor */ +#define RCC_PLL2DIVR1_DIVN_0 (0x001UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR1_DIVN_1 (0x002UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR1_DIVN_2 (0x004UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL2DIVR1_DIVN_3 (0x008UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL2DIVR1_DIVN_4 (0x010UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL2DIVR1_DIVN_5 (0x020UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL2DIVR1_DIVN_6 (0x040UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL2DIVR1_DIVN_7 (0x080UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL2DIVR1_DIVN_8 (0x100UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL2DIVR1_DIVP_Pos (9U) +#define RCC_PLL2DIVR1_DIVP_Msk (0x7FUL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL2DIVR1_DIVP RCC_PLL2DIVR1_DIVP_Msk /*!< DIVP2[6:0] bits: PLL2 DIVP division factor */ +#define RCC_PLL2DIVR1_DIVP_0 (0x001UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR1_DIVP_1 (0x002UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL2DIVR1_DIVP_2 (0x004UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL2DIVR1_DIVP_3 (0x008UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL2DIVR1_DIVP_4 (0x010UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL2DIVR1_DIVP_5 (0x020UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL2DIVR1_DIVP_6 (0x040UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL2DIVR1_DIVQ_Pos (16U) +#define RCC_PLL2DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL2DIVR1_DIVQ RCC_PLL2DIVR1_DIVQ_Msk /*!< DIVQ2[6:0] bits: PLL2 DIVQ division factor */ +#define RCC_PLL2DIVR1_DIVQ_0 (0x001UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL2DIVR1_DIVQ_1 (0x002UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL2DIVR1_DIVQ_2 (0x004UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL2DIVR1_DIVQ_3 (0x008UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL2DIVR1_DIVQ_4 (0x010UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL2DIVR1_DIVQ_5 (0x020UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL2DIVR1_DIVQ_6 (0x040UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL2DIVR1_DIVR_Pos (24U) +#define RCC_PLL2DIVR1_DIVR_Msk (0x7FUL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL2DIVR1_DIVR RCC_PLL2DIVR1_DIVR_Msk /*!< DIVR2[6:0] bits: PLL2 DIVR division factor */ +#define RCC_PLL2DIVR1_DIVR_0 (0x001UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL2DIVR1_DIVR_1 (0x002UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL2DIVR1_DIVR_2 (0x004UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL2DIVR1_DIVR_3 (0x008UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL2DIVR1_DIVR_4 (0x010UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL2DIVR1_DIVR_5 (0x020UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL2DIVR1_DIVR_6 (0x040UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2FRACR register *************/ +#define RCC_PLL2FRACR_FRACN_Pos (3U) +#define RCC_PLL2FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL2FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL2FRACR_FRACN RCC_PLL2FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL3DIVR1 register *************/ +#define RCC_PLL3DIVR1_DIVN_Pos (0U) +#define RCC_PLL3DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL3DIVR1_DIVN RCC_PLL3DIVR1_DIVN_Msk /*!< DIVN3[8:0] bits: PLL3 DIVN division factor */ +#define RCC_PLL3DIVR1_DIVN_0 (0x001UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR1_DIVN_1 (0x002UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR1_DIVN_2 (0x004UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL3DIVR1_DIVN_3 (0x008UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL3DIVR1_DIVN_4 (0x010UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL3DIVR1_DIVN_5 (0x020UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL3DIVR1_DIVN_6 (0x040UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL3DIVR1_DIVN_7 (0x080UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL3DIVR1_DIVN_8 (0x100UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL3DIVR1_DIVP_Pos (9U) +#define RCC_PLL3DIVR1_DIVP_Msk (0x7FUL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL3DIVR1_DIVP RCC_PLL3DIVR1_DIVP_Msk /*!< DIVP3[6:0] bits: PLL3 DIVP division factor */ +#define RCC_PLL3DIVR1_DIVP_0 (0x001UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL3DIVR1_DIVP_1 (0x002UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL3DIVR1_DIVP_2 (0x004UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL3DIVR1_DIVP_3 (0x008UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL3DIVR1_DIVP_4 (0x010UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL3DIVR1_DIVP_5 (0x020UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL3DIVR1_DIVP_6 (0x040UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL3DIVR1_DIVQ_Pos (16U) +#define RCC_PLL3DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL3DIVR1_DIVQ RCC_PLL3DIVR1_DIVQ_Msk /*!< DIVQ3[6:0] bits: PLL3 DIVQ division factor */ +#define RCC_PLL3DIVR1_DIVQ_0 (0x001UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL3DIVR1_DIVQ_1 (0x002UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL3DIVR1_DIVQ_2 (0x004UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL3DIVR1_DIVQ_3 (0x008UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL3DIVR1_DIVQ_4 (0x010UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL3DIVR1_DIVQ_5 (0x020UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL3DIVR1_DIVQ_6 (0x040UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL3DIVR1_DIVR_Pos (24U) +#define RCC_PLL3DIVR1_DIVR_Msk (0x7FUL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL3DIVR1_DIVR RCC_PLL3DIVR1_DIVR_Msk /*!< DIVR3[6:0] bits: PLL3 DIVR division factor */ +#define RCC_PLL3DIVR1_DIVR_0 (0x001UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL3DIVR1_DIVR_1 (0x002UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL3DIVR1_DIVR_2 (0x004UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL3DIVR1_DIVR_3 (0x008UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL3DIVR1_DIVR_4 (0x010UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL3DIVR1_DIVR_5 (0x020UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL3DIVR1_DIVR_6 (0x040UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3FRACR register *************/ +#define RCC_PLL3FRACR_FRACN_Pos (3U) +#define RCC_PLL3FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL3FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL3FRACR_FRACN RCC_PLL3FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_CCIPR1 register **************/ +#define RCC_CCIPR1_FMCSEL_Pos (0U) +#define RCC_CCIPR1_FMCSEL_Msk (0x3UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR1_FMCSEL RCC_CCIPR1_FMCSEL_Msk +#define RCC_CCIPR1_FMCSEL_0 (0x1UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR1_FMCSEL_1 (0x2UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR1_SDMMC12SEL_Pos (2U) +#define RCC_CCIPR1_SDMMC12SEL_Msk (0x1UL << RCC_CCIPR1_SDMMC12SEL_Pos) /*!< 0x00000004 */ +#define RCC_CCIPR1_SDMMC12SEL RCC_CCIPR1_SDMMC12SEL_Msk + +#define RCC_CCIPR1_XSPI1SEL_Pos (4U) +#define RCC_CCIPR1_XSPI1SEL_Msk (0x3UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000030 */ +#define RCC_CCIPR1_XSPI1SEL RCC_CCIPR1_XSPI1SEL_Msk +#define RCC_CCIPR1_XSPI1SEL_0 (0x1UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR1_XSPI1SEL_1 (0x2UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000020 */ + +#define RCC_CCIPR1_XSPI2SEL_Pos (6U) +#define RCC_CCIPR1_XSPI2SEL_Msk (0x3UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x000000C0 */ +#define RCC_CCIPR1_XSPI2SEL RCC_CCIPR1_XSPI2SEL_Msk +#define RCC_CCIPR1_XSPI2SEL_0 (0x1UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000040 */ +#define RCC_CCIPR1_XSPI2SEL_1 (0x2UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000080 */ + +#define RCC_CCIPR1_USBREFCKSEL_Pos (8U) +#define RCC_CCIPR1_USBREFCKSEL_Msk (0xFUL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000F00 */ +#define RCC_CCIPR1_USBREFCKSEL RCC_CCIPR1_USBREFCKSEL_Msk +#define RCC_CCIPR1_USBREFCKSEL_0 (0x1UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR1_USBREFCKSEL_1 (0x2UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR1_USBREFCKSEL_2 (0x4UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000400 */ +#define RCC_CCIPR1_USBREFCKSEL_3 (0x8UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000800 */ + +#define RCC_CCIPR1_USBPHYCSEL_Pos (12U) +#define RCC_CCIPR1_USBPHYCSEL_Msk (0x3UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR1_USBPHYCSEL RCC_CCIPR1_USBPHYCSEL_Msk +#define RCC_CCIPR1_USBPHYCSEL_0 (0x1UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR1_USBPHYCSEL_1 (0x2UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR1_OTGFSSEL_Pos (14U) +#define RCC_CCIPR1_OTGFSSEL_Msk (0x3UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CCIPR1_OTGFSSEL RCC_CCIPR1_OTGFSSEL_Msk +#define RCC_CCIPR1_OTGFSSEL_0 (0x1UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00004000 */ +#define RCC_CCIPR1_OTGFSSEL_1 (0x2UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00008000 */ + +#define RCC_CCIPR1_ETH1REFCKSEL_Pos (16U) +#define RCC_CCIPR1_ETH1REFCKSEL_Msk (0x3UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00030000 */ +#define RCC_CCIPR1_ETH1REFCKSEL RCC_CCIPR1_ETH1REFCKSEL_Msk +#define RCC_CCIPR1_ETH1REFCKSEL_0 (0x1UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR1_ETH1REFCKSEL_1 (0x2UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00020000 */ + +#define RCC_CCIPR1_ETH1PHYCKSEL_Pos (18U) +#define RCC_CCIPR1_ETH1PHYCKSEL_Msk (0x1UL << RCC_CCIPR1_ETH1PHYCKSEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR1_ETH1PHYCKSEL RCC_CCIPR1_ETH1PHYCKSEL_Msk + +#define RCC_CCIPR1_ADF1SEL_Pos (20U) +#define RCC_CCIPR1_ADF1SEL_Msk (0x7UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR1_ADF1SEL RCC_CCIPR1_ADF1SEL_Msk +#define RCC_CCIPR1_ADF1SEL_0 (0x1UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR1_ADF1SEL_1 (0x2UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR1_ADF1SEL_2 (0x4UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00400000 */ + +#define RCC_CCIPR1_ADCSEL_Pos (24U) +#define RCC_CCIPR1_ADCSEL_Msk (0x3UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR1_ADCSEL RCC_CCIPR1_ADCSEL_Msk +#define RCC_CCIPR1_ADCSEL_0 (0x1UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR1_ADCSEL_1 (0x2UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR1_PSSISEL_Pos (27U) +#define RCC_CCIPR1_PSSISEL_Msk (0x1UL << RCC_CCIPR1_PSSISEL_Pos) /*!< 0x08000000 */ +#define RCC_CCIPR1_PSSISEL RCC_CCIPR1_PSSISEL_Msk + +#define RCC_CCIPR1_CKPERSEL_Pos (28U) +#define RCC_CCIPR1_CKPERSEL_Msk (0x3UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR1_CKPERSEL RCC_CCIPR1_CKPERSEL_Msk +#define RCC_CCIPR1_CKPERSEL_0 (0x1UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR1_CKPERSEL_1 (0x2UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CCIPR2 register *************/ +#define RCC_CCIPR2_UART234578SEL_Pos (0U) +#define RCC_CCIPR2_UART234578SEL_Msk (0x7UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR2_UART234578SEL RCC_CCIPR2_UART234578SEL_Msk +#define RCC_CCIPR2_UART234578SEL_0 (0x1UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR2_UART234578SEL_1 (0x2UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR2_UART234578SEL_2 (0x4UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR2_SPI23SEL_Pos (4U) +#define RCC_CCIPR2_SPI23SEL_Msk (0x7UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR2_SPI23SEL RCC_CCIPR2_SPI23SEL_Msk +#define RCC_CCIPR2_SPI23SEL_0 (0x1UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR2_SPI23SEL_1 (0x2UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR2_SPI23SEL_2 (0x4UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR2_I2C23SEL_Pos (8U) +#define RCC_CCIPR2_I2C23SEL_Msk (0x3UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000300 */ +#define RCC_CCIPR2_I2C23SEL RCC_CCIPR2_I2C23SEL_Msk +#define RCC_CCIPR2_I2C23SEL_0 (0x1UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR2_I2C23SEL_1 (0x2UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000200 */ + +#define RCC_CCIPR2_I2C1_I3C1SEL_Pos (12U) +#define RCC_CCIPR2_I2C1_I3C1SEL_Msk (0x3UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL RCC_CCIPR2_I2C1_I3C1SEL_Msk +#define RCC_CCIPR2_I2C1_I3C1SEL_0 (0x1UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL_1 (0x2UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR2_LPTIM1SEL_Pos (16U) +#define RCC_CCIPR2_LPTIM1SEL_Msk (0x7UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR2_LPTIM1SEL RCC_CCIPR2_LPTIM1SEL_Msk +#define RCC_CCIPR2_LPTIM1SEL_0 (0x1UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR2_LPTIM1SEL_1 (0x2UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR2_LPTIM1SEL_2 (0x4UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR2_FDCANSEL_Pos (22U) +#define RCC_CCIPR2_FDCANSEL_Msk (0x3UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00C00000 */ +#define RCC_CCIPR2_FDCANSEL RCC_CCIPR2_FDCANSEL_Msk +#define RCC_CCIPR2_FDCANSEL_0 (0x1UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00400000 */ +#define RCC_CCIPR2_FDCANSEL_1 (0x2UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00800000 */ + +#define RCC_CCIPR2_SPDIFRXSEL_Pos (24U) +#define RCC_CCIPR2_SPDIFRXSEL_Msk (0x3UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_SPDIFRXSEL RCC_CCIPR2_SPDIFRXSEL_Msk +#define RCC_CCIPR2_SPDIFRXSEL_0 (0x1UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_SPDIFRXSEL_1 (0x2UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR2_CECSEL_Pos (28U) +#define RCC_CCIPR2_CECSEL_Msk (0x3UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_CECSEL RCC_CCIPR2_CECSEL_Msk +#define RCC_CCIPR2_CECSEL_0 (0x1UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_CECSEL_1 (0x2UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_CCIPR3 register *************/ +#define RCC_CCIPR3_USART1SEL_Pos (0U) +#define RCC_CCIPR3_USART1SEL_Msk (0x7UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR3_USART1SEL RCC_CCIPR3_USART1SEL_Msk +#define RCC_CCIPR3_USART1SEL_0 (0x1UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR3_USART1SEL_1 (0x2UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR3_USART1SEL_2 (0x4UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR3_SPI45SEL_Pos (4U) +#define RCC_CCIPR3_SPI45SEL_Msk (0x7UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR3_SPI45SEL RCC_CCIPR3_SPI45SEL_Msk +#define RCC_CCIPR3_SPI45SEL_0 (0x1UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR3_SPI45SEL_1 (0x2UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR3_SPI45SEL_2 (0x4UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR3_SPI1SEL_Pos (8U) +#define RCC_CCIPR3_SPI1SEL_Msk (0x7UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR3_SPI1SEL RCC_CCIPR3_SPI1SEL_Msk +#define RCC_CCIPR3_SPI1SEL_0 (0x1UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR3_SPI1SEL_1 (0x2UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR3_SPI1SEL_2 (0x4UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR3_SAI1SEL_Pos (16U) +#define RCC_CCIPR3_SAI1SEL_Msk (0x7UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR3_SAI1SEL RCC_CCIPR3_SAI1SEL_Msk +#define RCC_CCIPR3_SAI1SEL_0 (0x1UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR3_SAI1SEL_1 (0x2UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR3_SAI1SEL_2 (0x4UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR3_SAI2SEL_Pos (20U) +#define RCC_CCIPR3_SAI2SEL_Msk (0x7UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR3_SAI2SEL RCC_CCIPR3_SAI2SEL_Msk +#define RCC_CCIPR3_SAI2SEL_0 (0x1UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR3_SAI2SEL_1 (0x2UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR3_SAI2SEL_2 (0x4UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00400000 */ + +/******************** Bit definition for RCC_CCIPR4 register ************/ +#define RCC_CCIPR4_LPUART1SEL_Pos (0U) +#define RCC_CCIPR4_LPUART1SEL_Msk (0x7UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR4_LPUART1SEL RCC_CCIPR4_LPUART1SEL_Msk +#define RCC_CCIPR4_LPUART1SEL_0 (0x1UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR4_LPUART1SEL_1 (0x2UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR4_LPUART1SEL_2 (0x4UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR4_SPI6SEL_Pos (4U) +#define RCC_CCIPR4_SPI6SEL_Msk (0x7UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR4_SPI6SEL RCC_CCIPR4_SPI6SEL_Msk +#define RCC_CCIPR4_SPI6SEL_0 (0x1UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR4_SPI6SEL_1 (0x2UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR4_SPI6SEL_2 (0x4UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR4_LPTIM23SEL_Pos (8U) +#define RCC_CCIPR4_LPTIM23SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR4_LPTIM23SEL RCC_CCIPR4_LPTIM23SEL_Msk +#define RCC_CCIPR4_LPTIM23SEL_0 (0x1UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR4_LPTIM23SEL_1 (0x2UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR4_LPTIM23SEL_2 (0x4UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR4_LPTIM45SEL_Pos (12U) +#define RCC_CCIPR4_LPTIM45SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00007000 */ +#define RCC_CCIPR4_LPTIM45SEL RCC_CCIPR4_LPTIM45SEL_Msk +#define RCC_CCIPR4_LPTIM45SEL_0 (0x1UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR4_LPTIM45SEL_1 (0x2UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00002000 */ +#define RCC_CCIPR4_LPTIM45SEL_2 (0x4UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSIRDYIE_Pos (0U) +#define RCC_CIER_LSIRDYIE_Msk (0x1UL << RCC_CIER_LSIRDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (2U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (3U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_CSIRDYIE_Pos (4U) +#define RCC_CIER_CSIRDYIE_Msk (0x1UL << RCC_CIER_CSIRDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_CSIRDYIE RCC_CIER_CSIRDYIE_Msk +#define RCC_CIER_HSI48RDYIE_Pos (5U) +#define RCC_CIER_HSI48RDYIE_Msk (0x1UL << RCC_CIER_HSI48RDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE_Msk +#define RCC_CIER_PLL1RDYIE_Pos (6U) +#define RCC_CIER_PLL1RDYIE_Msk (0x1UL << RCC_CIER_PLL1RDYIE_Pos) /*!< 0x00000040 */ +#define RCC_CIER_PLL1RDYIE RCC_CIER_PLL1RDYIE_Msk +#define RCC_CIER_PLL2RDYIE_Pos (7U) +#define RCC_CIER_PLL2RDYIE_Msk (0x1UL << RCC_CIER_PLL2RDYIE_Pos) /*!< 0x00000080 */ +#define RCC_CIER_PLL2RDYIE RCC_CIER_PLL2RDYIE_Msk +#define RCC_CIER_PLL3RDYIE_Pos (8U) +#define RCC_CIER_PLL3RDYIE_Msk (0x1UL << RCC_CIER_PLL3RDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIER_PLL3RDYIE RCC_CIER_PLL3RDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSIRDYF_Pos (0U) +#define RCC_CIFR_LSIRDYF_Msk (0x1UL << RCC_CIFR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (2U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (3U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_CSIRDYF_Pos (4U) +#define RCC_CIFR_CSIRDYF_Msk (0x1UL << RCC_CIFR_CSIRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_CSIRDYF RCC_CIFR_CSIRDYF_Msk +#define RCC_CIFR_HSI48RDYF_Pos (5U) +#define RCC_CIFR_HSI48RDYF_Msk (0x1UL << RCC_CIFR_HSI48RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF_Msk +#define RCC_CIFR_PLL1RDYF_Pos (6U) +#define RCC_CIFR_PLL1RDYF_Msk (0x1UL << RCC_CIFR_PLL1RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIFR_PLL1RDYF RCC_CIFR_PLL1RDYF_Msk +#define RCC_CIFR_PLL2RDYF_Pos (7U) +#define RCC_CIFR_PLL2RDYF_Msk (0x1UL << RCC_CIFR_PLL2RDYF_Pos) /*!< 0x00000080 */ +#define RCC_CIFR_PLL2RDYF RCC_CIFR_PLL2RDYF_Msk +#define RCC_CIFR_PLL3RDYF_Pos (8U) +#define RCC_CIFR_PLL3RDYF_Msk (0x1UL << RCC_CIFR_PLL3RDYF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_PLL3RDYF RCC_CIFR_PLL3RDYF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_HSECSSF_Pos (10U) +#define RCC_CIFR_HSECSSF_Msk (0x1UL << RCC_CIFR_HSECSSF_Pos) /*!< 0x00000400 */ +#define RCC_CIFR_HSECSSF RCC_CIFR_HSECSSF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSIRDYC_Pos (0U) +#define RCC_CICR_LSIRDYC_Msk (0x1UL << RCC_CICR_LSIRDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (2U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (3U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_CSIRDYC_Pos (4U) +#define RCC_CICR_CSIRDYC_Msk (0x1UL << RCC_CICR_CSIRDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_CSIRDYC RCC_CICR_CSIRDYC_Msk +#define RCC_CICR_HSI48RDYC_Pos (5U) +#define RCC_CICR_HSI48RDYC_Msk (0x1UL << RCC_CICR_HSI48RDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC_Msk +#define RCC_CICR_PLL1RDYC_Pos (6U) +#define RCC_CICR_PLL1RDYC_Msk (0x1UL << RCC_CICR_PLL1RDYC_Pos) /*!< 0x00000040 */ +#define RCC_CICR_PLL1RDYC RCC_CICR_PLL1RDYC_Msk +#define RCC_CICR_PLL2RDYC_Pos (7U) +#define RCC_CICR_PLL2RDYC_Msk (0x1UL << RCC_CICR_PLL2RDYC_Pos) /*!< 0x00000080 */ +#define RCC_CICR_PLL2RDYC RCC_CICR_PLL2RDYC_Msk +#define RCC_CICR_PLL3RDYC_Pos (8U) +#define RCC_CICR_PLL3RDYC_Msk (0x1UL << RCC_CICR_PLL3RDYC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_PLL3RDYC RCC_CICR_PLL3RDYC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_HSECSSC_Pos (10U) +#define RCC_CICR_HSECSSC_Msk (0x1UL << RCC_CICR_HSECSSC_Pos) /*!< 0x00000400 */ +#define RCC_CICR_HSECSSC RCC_CICR_HSECSSC_Msk + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk +#define RCC_BDCR_LSEEXT_Pos (7U) +#define RCC_BDCR_LSEEXT_Msk (0x1UL << RCC_BDCR_LSEEXT_Pos) /*!< 0x00000080 */ +#define RCC_BDCR_LSEEXT RCC_BDCR_LSEEXT_Msk +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ +#define RCC_BDCR_LSECSSRA_Pos (12U) +#define RCC_BDCR_LSECSSRA_Msk (0x1UL << RCC_BDCR_LSECSSRA_Pos) /*!< 0x00001000 */ +#define RCC_BDCR_LSECSSRA RCC_BDCR_LSECSSRA_Msk + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk +#define RCC_BDCR_VSWRST_Pos (16U) +#define RCC_BDCR_VSWRST_Msk (0x1UL << RCC_BDCR_VSWRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_VSWRST RCC_BDCR_VSWRST_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_GPDMA1RST_Pos (4U) +#define RCC_AHB1RSTR_GPDMA1RST_Msk (0x1UL << RCC_AHB1RSTR_GPDMA1RST_Pos) /*!< 0x00000010 */ +#define RCC_AHB1RSTR_GPDMA1RST RCC_AHB1RSTR_GPDMA1RST_Msk +#define RCC_AHB1RSTR_ADC12RST_Pos (5U) +#define RCC_AHB1RSTR_ADC12RST_Msk (0x1UL << RCC_AHB1RSTR_ADC12RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB1RSTR_ADC12RST RCC_AHB1RSTR_ADC12RST_Msk +#define RCC_AHB1RSTR_ETH1RST_Pos (15U) +#define RCC_AHB1RSTR_ETH1RST_Msk (0x1UL << RCC_AHB1RSTR_ETH1RST_Pos) /*!< 0x00008000 */ +#define RCC_AHB1RSTR_ETH1RST RCC_AHB1RSTR_ETH1RST_Msk +#define RCC_AHB1RSTR_OTGHSRST_Pos (25U) +#define RCC_AHB1RSTR_OTGHSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGHSRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB1RSTR_OTGHSRST RCC_AHB1RSTR_OTGHSRST_Msk +#define RCC_AHB1RSTR_USBPHYCRST_Pos (26U) +#define RCC_AHB1RSTR_USBPHYCRST_Msk (0x1UL << RCC_AHB1RSTR_USBPHYCRST_Pos) /*!< 0x04000000 */ +#define RCC_AHB1RSTR_USBPHYCRST RCC_AHB1RSTR_USBPHYCRST_Msk +#define RCC_AHB1RSTR_OTGFSRST_Pos (27U) +#define RCC_AHB1RSTR_OTGFSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGFSRST_Pos) /*!< 0x08000000 */ +#define RCC_AHB1RSTR_OTGFSRST RCC_AHB1RSTR_OTGFSRST_Msk +#define RCC_AHB1RSTR_ADF1RST_Pos (31U) +#define RCC_AHB1RSTR_ADF1RST_Msk (0x1UL << RCC_AHB1RSTR_ADF1RST_Pos) /*!< 0x80000000 */ +#define RCC_AHB1RSTR_ADF1RST RCC_AHB1RSTR_ADF1RST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register **************/ +#define RCC_AHB2RSTR_PSSIRST_Pos (1U) +#define RCC_AHB2RSTR_PSSIRST_Msk (0x1UL << RCC_AHB2RSTR_PSSIRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_PSSIRST RCC_AHB2RSTR_PSSIRST_Msk +#define RCC_AHB2RSTR_SDMMC2RST_Pos (9U) +#define RCC_AHB2RSTR_SDMMC2RST_Msk (0x1UL << RCC_AHB2RSTR_SDMMC2RST_Pos) /*!< 0x00000200 */ +#define RCC_AHB2RSTR_SDMMC2RST RCC_AHB2RSTR_SDMMC2RST_Msk +#define RCC_AHB2RSTR_CORDICRST_Pos (14U) +#define RCC_AHB2RSTR_CORDICRST_Msk (0x1UL << RCC_AHB2RSTR_CORDICRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB2RSTR_CORDICRST RCC_AHB2RSTR_CORDICRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register **************/ +#define RCC_AHB3RSTR_RNGRST_Pos (0U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00000001 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HASHRST_Pos (1U) +#define RCC_AHB3RSTR_HASHRST_Msk (0x1UL << RCC_AHB3RSTR_HASHRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB3RSTR_HASHRST RCC_AHB3RSTR_HASHRST_Msk +#define RCC_AHB3RSTR_PKARST_Pos (6U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00000040 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk + +/******************** Bit definition for RCC_AHB4RSTR register **************/ +#define RCC_AHB4RSTR_GPIOARST_Pos (0U) +#define RCC_AHB4RSTR_GPIOARST_Msk (0x1UL << RCC_AHB4RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB4RSTR_GPIOARST RCC_AHB4RSTR_GPIOARST_Msk +#define RCC_AHB4RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB4RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB4RSTR_GPIOBRST RCC_AHB4RSTR_GPIOBRST_Msk +#define RCC_AHB4RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB4RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB4RSTR_GPIOCRST RCC_AHB4RSTR_GPIOCRST_Msk +#define RCC_AHB4RSTR_GPIODRST_Pos (3U) +#define RCC_AHB4RSTR_GPIODRST_Msk (0x1UL << RCC_AHB4RSTR_GPIODRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB4RSTR_GPIODRST RCC_AHB4RSTR_GPIODRST_Msk +#define RCC_AHB4RSTR_GPIOERST_Pos (4U) +#define RCC_AHB4RSTR_GPIOERST_Msk (0x1UL << RCC_AHB4RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB4RSTR_GPIOERST RCC_AHB4RSTR_GPIOERST_Msk +#define RCC_AHB4RSTR_GPIOFRST_Pos (5U) +#define RCC_AHB4RSTR_GPIOFRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOFRST_Pos) /*!< 0x00000020 */ +#define RCC_AHB4RSTR_GPIOFRST RCC_AHB4RSTR_GPIOFRST_Msk +#define RCC_AHB4RSTR_GPIOGRST_Pos (6U) +#define RCC_AHB4RSTR_GPIOGRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOGRST_Pos) /*!< 0x00000040 */ +#define RCC_AHB4RSTR_GPIOGRST RCC_AHB4RSTR_GPIOGRST_Msk +#define RCC_AHB4RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB4RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB4RSTR_GPIOHRST RCC_AHB4RSTR_GPIOHRST_Msk +#define RCC_AHB4RSTR_GPIOMRST_Pos (12U) +#define RCC_AHB4RSTR_GPIOMRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOMRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB4RSTR_GPIOMRST RCC_AHB4RSTR_GPIOMRST_Msk +#define RCC_AHB4RSTR_GPIONRST_Pos (13U) +#define RCC_AHB4RSTR_GPIONRST_Msk (0x1UL << RCC_AHB4RSTR_GPIONRST_Pos) /*!< 0x00002000 */ +#define RCC_AHB4RSTR_GPIONRST RCC_AHB4RSTR_GPIONRST_Msk +#define RCC_AHB4RSTR_GPIOORST_Pos (14U) +#define RCC_AHB4RSTR_GPIOORST_Msk (0x1UL << RCC_AHB4RSTR_GPIOORST_Pos) /*!< 0x00004000 */ +#define RCC_AHB4RSTR_GPIOORST RCC_AHB4RSTR_GPIOORST_Msk +#define RCC_AHB4RSTR_GPIOPRST_Pos (15U) +#define RCC_AHB4RSTR_GPIOPRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOPRST_Pos) /*!< 0x00008000 */ +#define RCC_AHB4RSTR_GPIOPRST RCC_AHB4RSTR_GPIOPRST_Msk +#define RCC_AHB4RSTR_CRCRST_Pos (19U) +#define RCC_AHB4RSTR_CRCRST_Msk (0x1UL << RCC_AHB4RSTR_CRCRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB4RSTR_CRCRST RCC_AHB4RSTR_CRCRST_Msk + +/******************** Bit definition for RCC_AHB5RSTR register **************/ +#define RCC_AHB5RSTR_HPDMA1RST_Pos (0U) +#define RCC_AHB5RSTR_HPDMA1RST_Msk (0x1UL << RCC_AHB5RSTR_HPDMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB5RSTR_HPDMA1RST RCC_AHB5RSTR_HPDMA1RST_Msk +#define RCC_AHB5RSTR_DMA2DRST_Pos (1U) +#define RCC_AHB5RSTR_DMA2DRST_Msk (0x1UL << RCC_AHB5RSTR_DMA2DRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB5RSTR_DMA2DRST RCC_AHB5RSTR_DMA2DRST_Msk +#define RCC_AHB5RSTR_JPEGRST_Pos (3U) +#define RCC_AHB5RSTR_JPEGRST_Msk (0x1UL << RCC_AHB5RSTR_JPEGRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB5RSTR_JPEGRST RCC_AHB5RSTR_JPEGRST_Msk +#define RCC_AHB5RSTR_FMCRST_Pos (4U) +#define RCC_AHB5RSTR_FMCRST_Msk (0x1UL << RCC_AHB5RSTR_FMCRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB5RSTR_FMCRST RCC_AHB5RSTR_FMCRST_Msk +#define RCC_AHB5RSTR_XSPI1RST_Pos (5U) +#define RCC_AHB5RSTR_XSPI1RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI1RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB5RSTR_XSPI1RST RCC_AHB5RSTR_XSPI1RST_Msk +#define RCC_AHB5RSTR_SDMMC1RST_Pos (8U) +#define RCC_AHB5RSTR_SDMMC1RST_Msk (0x1UL << RCC_AHB5RSTR_SDMMC1RST_Pos) /*!< 0x00000100 */ +#define RCC_AHB5RSTR_SDMMC1RST RCC_AHB5RSTR_SDMMC1RST_Msk +#define RCC_AHB5RSTR_XSPI2RST_Pos (12U) +#define RCC_AHB5RSTR_XSPI2RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI2RST_Pos) /*!< 0x00001000 */ +#define RCC_AHB5RSTR_XSPI2RST RCC_AHB5RSTR_XSPI2RST_Msk +#define RCC_AHB5RSTR_XSPIMRST_Pos (14U) +#define RCC_AHB5RSTR_XSPIMRST_Msk (0x1UL << RCC_AHB5RSTR_XSPIMRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB5RSTR_XSPIMRST RCC_AHB5RSTR_XSPIMRST_Msk +#define RCC_AHB5RSTR_GFXMMURST_Pos (19U) +#define RCC_AHB5RSTR_GFXMMURST_Msk (0x1UL << RCC_AHB5RSTR_GFXMMURST_Pos) /*!< 0x00080000 */ +#define RCC_AHB5RSTR_GFXMMURST RCC_AHB5RSTR_GFXMMURST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register *************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_TIM3RST_Pos (1U) +#define RCC_APB1RSTR1_TIM3RST_Msk (0x1UL << RCC_APB1RSTR1_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR1_TIM3RST RCC_APB1RSTR1_TIM3RST_Msk +#define RCC_APB1RSTR1_TIM4RST_Pos (2U) +#define RCC_APB1RSTR1_TIM4RST_Msk (0x1UL << RCC_APB1RSTR1_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR1_TIM4RST RCC_APB1RSTR1_TIM4RST_Msk +#define RCC_APB1RSTR1_TIM5RST_Pos (3U) +#define RCC_APB1RSTR1_TIM5RST_Msk (0x1UL << RCC_APB1RSTR1_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR1_TIM5RST RCC_APB1RSTR1_TIM5RST_Msk +#define RCC_APB1RSTR1_TIM6RST_Pos (4U) +#define RCC_APB1RSTR1_TIM6RST_Msk (0x1UL << RCC_APB1RSTR1_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR1_TIM6RST RCC_APB1RSTR1_TIM6RST_Msk +#define RCC_APB1RSTR1_TIM7RST_Pos (5U) +#define RCC_APB1RSTR1_TIM7RST_Msk (0x1UL << RCC_APB1RSTR1_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR1_TIM7RST RCC_APB1RSTR1_TIM7RST_Msk +#define RCC_APB1RSTR1_TIM12RST_Pos (6U) +#define RCC_APB1RSTR1_TIM12RST_Msk (0x1UL << RCC_APB1RSTR1_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR1_TIM12RST RCC_APB1RSTR1_TIM12RST_Msk +#define RCC_APB1RSTR1_TIM13RST_Pos (7U) +#define RCC_APB1RSTR1_TIM13RST_Msk (0x1UL << RCC_APB1RSTR1_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR1_TIM13RST RCC_APB1RSTR1_TIM13RST_Msk +#define RCC_APB1RSTR1_TIM14RST_Pos (8U) +#define RCC_APB1RSTR1_TIM14RST_Msk (0x1UL << RCC_APB1RSTR1_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR1_TIM14RST RCC_APB1RSTR1_TIM14RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (9U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk +#define RCC_APB1RSTR1_SPI2RST_Pos (14U) +#define RCC_APB1RSTR1_SPI2RST_Msk (0x1UL << RCC_APB1RSTR1_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR1_SPI2RST RCC_APB1RSTR1_SPI2RST_Msk +#define RCC_APB1RSTR1_SPI3RST_Pos (15U) +#define RCC_APB1RSTR1_SPI3RST_Msk (0x1UL << RCC_APB1RSTR1_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR1_SPI3RST RCC_APB1RSTR1_SPI3RST_Msk +#define RCC_APB1RSTR1_SPDIFRXRST_Pos (16U) +#define RCC_APB1RSTR1_SPDIFRXRST_Msk (0x1UL << RCC_APB1RSTR1_SPDIFRXRST_Pos) /*!< 0x00010000 */ +#define RCC_APB1RSTR1_SPDIFRXRST RCC_APB1RSTR1_SPDIFRXRST_Msk +#define RCC_APB1RSTR1_USART2RST_Pos (17U) +#define RCC_APB1RSTR1_USART2RST_Msk (0x1UL << RCC_APB1RSTR1_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR1_USART2RST RCC_APB1RSTR1_USART2RST_Msk +#define RCC_APB1RSTR1_USART3RST_Pos (18U) +#define RCC_APB1RSTR1_USART3RST_Msk (0x1UL << RCC_APB1RSTR1_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR1_USART3RST RCC_APB1RSTR1_USART3RST_Msk +#define RCC_APB1RSTR1_UART4RST_Pos (19U) +#define RCC_APB1RSTR1_UART4RST_Msk (0x1UL << RCC_APB1RSTR1_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR1_UART4RST RCC_APB1RSTR1_UART4RST_Msk +#define RCC_APB1RSTR1_UART5RST_Pos (20U) +#define RCC_APB1RSTR1_UART5RST_Msk (0x1UL << RCC_APB1RSTR1_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR1_UART5RST RCC_APB1RSTR1_UART5RST_Msk +#define RCC_APB1RSTR1_I2C1_I3C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1_I3C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1_I3C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1_I3C1RST RCC_APB1RSTR1_I2C1_I3C1RST_Msk +#define RCC_APB1RSTR1_I2C2RST_Pos (22U) +#define RCC_APB1RSTR1_I2C2RST_Msk (0x1UL << RCC_APB1RSTR1_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR1_I2C2RST RCC_APB1RSTR1_I2C2RST_Msk +#define RCC_APB1RSTR1_I2C3RST_Pos (23U) +#define RCC_APB1RSTR1_I2C3RST_Msk (0x1UL << RCC_APB1RSTR1_I2C3RST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR1_I2C3RST RCC_APB1RSTR1_I2C3RST_Msk +#define RCC_APB1RSTR1_CECRST_Pos (27U) +#define RCC_APB1RSTR1_CECRST_Msk (0x1UL << RCC_APB1RSTR1_CECRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR1_CECRST RCC_APB1RSTR1_CECRST_Msk +#define RCC_APB1RSTR1_UART7RST_Pos (30U) +#define RCC_APB1RSTR1_UART7RST_Msk (0x1UL << RCC_APB1RSTR1_UART7RST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR1_UART7RST RCC_APB1RSTR1_UART7RST_Msk +#define RCC_APB1RSTR1_UART8RST_Pos (31U) +#define RCC_APB1RSTR1_UART8RST_Msk (0x1UL << RCC_APB1RSTR1_UART8RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_UART8RST RCC_APB1RSTR1_UART8RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register *************/ +#define RCC_APB1RSTR2_CRSRST_Pos (1U) +#define RCC_APB1RSTR2_CRSRST_Msk (0x1UL << RCC_APB1RSTR2_CRSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR2_CRSRST RCC_APB1RSTR2_CRSRST_Msk +#define RCC_APB1RSTR2_MDIOSRST_Pos (5U) +#define RCC_APB1RSTR2_MDIOSRST_Msk (0x1UL << RCC_APB1RSTR2_MDIOSRST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_MDIOSRST RCC_APB1RSTR2_MDIOSRST_Msk +#define RCC_APB1RSTR2_FDCANRST_Pos (8U) +#define RCC_APB1RSTR2_FDCANRST_Msk (0x1UL << RCC_APB1RSTR2_FDCANRST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR2_FDCANRST RCC_APB1RSTR2_FDCANRST_Msk +#define RCC_APB1RSTR2_UCPD1RST_Pos (27U) +#define RCC_APB1RSTR2_UCPD1RST_Msk (0x1UL << RCC_APB1RSTR2_UCPD1RST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR2_UCPD1RST RCC_APB1RSTR2_UCPD1RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_TIM1RST_Pos (0U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (4U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_SPI4RST_Pos (13U) +#define RCC_APB2RSTR_SPI4RST_Msk (0x1UL << RCC_APB2RSTR_SPI4RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_SPI4RST RCC_APB2RSTR_SPI4RST_Msk +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk +#define RCC_APB2RSTR_SPI5RST_Pos (20U) +#define RCC_APB2RSTR_SPI5RST_Msk (0x1UL << RCC_APB2RSTR_SPI5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_SPI5RST RCC_APB2RSTR_SPI5RST_Msk +#define RCC_APB2RSTR_SAI1RST_Pos (22U) +#define RCC_APB2RSTR_SAI1RST_Msk (0x1UL << RCC_APB2RSTR_SAI1RST_Pos) /*!< 0x00400000 */ +#define RCC_APB2RSTR_SAI1RST RCC_APB2RSTR_SAI1RST_Msk +#define RCC_APB2RSTR_SAI2RST_Pos (23U) +#define RCC_APB2RSTR_SAI2RST_Msk (0x1UL << RCC_APB2RSTR_SAI2RST_Pos) /*!< 0x00800000 */ +#define RCC_APB2RSTR_SAI2RST RCC_APB2RSTR_SAI2RST_Msk + +/******************** Bit definition for RCC_APB4RSTR register **************/ +#define RCC_APB4RSTR_SBSRST_Pos (1U) +#define RCC_APB4RSTR_SBSRST_Msk (0x1UL << RCC_APB4RSTR_SBSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB4RSTR_SBSRST RCC_APB4RSTR_SBSRST_Msk +#define RCC_APB4RSTR_LPUART1RST_Pos (3U) +#define RCC_APB4RSTR_LPUART1RST_Msk (0x1UL << RCC_APB4RSTR_LPUART1RST_Pos) /*!< 0x00000008 */ +#define RCC_APB4RSTR_LPUART1RST RCC_APB4RSTR_LPUART1RST_Msk +#define RCC_APB4RSTR_SPI6RST_Pos (5U) +#define RCC_APB4RSTR_SPI6RST_Msk (0x1UL << RCC_APB4RSTR_SPI6RST_Pos) /*!< 0x00000020 */ +#define RCC_APB4RSTR_SPI6RST RCC_APB4RSTR_SPI6RST_Msk +#define RCC_APB4RSTR_LPTIM2RST_Pos (9U) +#define RCC_APB4RSTR_LPTIM2RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM2RST_Pos) /*!< 0x00000200 */ +#define RCC_APB4RSTR_LPTIM2RST RCC_APB4RSTR_LPTIM2RST_Msk +#define RCC_APB4RSTR_LPTIM3RST_Pos (10U) +#define RCC_APB4RSTR_LPTIM3RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM3RST_Pos) /*!< 0x00000400 */ +#define RCC_APB4RSTR_LPTIM3RST RCC_APB4RSTR_LPTIM3RST_Msk +#define RCC_APB4RSTR_LPTIM4RST_Pos (11U) +#define RCC_APB4RSTR_LPTIM4RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM4RST_Pos) /*!< 0x00000800 */ +#define RCC_APB4RSTR_LPTIM4RST RCC_APB4RSTR_LPTIM4RST_Msk +#define RCC_APB4RSTR_LPTIM5RST_Pos (12U) +#define RCC_APB4RSTR_LPTIM5RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM5RST_Pos) /*!< 0x00001000 */ +#define RCC_APB4RSTR_LPTIM5RST RCC_APB4RSTR_LPTIM5RST_Msk +#define RCC_APB4RSTR_VREFRST_Pos (15U) +#define RCC_APB4RSTR_VREFRST_Msk (0x1UL << RCC_APB4RSTR_VREFRST_Pos) /*!< 0x00008000 */ +#define RCC_APB4RSTR_VREFRST RCC_APB4RSTR_VREFRST_Msk +#define RCC_APB4RSTR_DTSRST_Pos (26U) +#define RCC_APB4RSTR_DTSRST_Msk (0x1UL << RCC_APB4RSTR_DTSRST_Pos) /*!< 0x04000000 */ +#define RCC_APB4RSTR_DTSRST RCC_APB4RSTR_DTSRST_Msk + +/******************** Bit definition for RCC_APB5RSTR register **************/ +#define RCC_APB5RSTR_DCMIPPRST_Pos (2U) +#define RCC_APB5RSTR_DCMIPPRST_Msk (0x1UL << RCC_APB5RSTR_DCMIPPRST_Pos) /*!< 0x00000004 */ +#define RCC_APB5RSTR_DCMIPPRST RCC_APB5RSTR_DCMIPPRST_Msk +#define RCC_APB5RSTR_GFXTIMRST_Pos (4U) +#define RCC_APB5RSTR_GFXTIMRST_Msk (0x1UL << RCC_APB5RSTR_GFXTIMRST_Pos) /*!< 0x00000010 */ +#define RCC_APB5RSTR_GFXTIMRST RCC_APB5RSTR_GFXTIMRST_Msk + +/******************** Bit definition for RCC_CKGDISR register ***************/ +#define RCC_CKGDISR_AXICKG_Pos (0U) +#define RCC_CKGDISR_AXICKG_Msk (0x1UL << RCC_CKGDISR_AXICKG_Pos) /*!< 0x00000001 */ +#define RCC_CKGDISR_AXICKG RCC_CKGDISR_AXICKG_Msk +#define RCC_CKGDISR_AHBMCKG_Pos (1U) +#define RCC_CKGDISR_AHBMCKG_Msk (0x1UL << RCC_CKGDISR_AHBMCKG_Pos) /*!< 0x00000002 */ +#define RCC_CKGDISR_AHBMCKG RCC_CKGDISR_AHBMCKG_Msk +#define RCC_CKGDISR_SDMMC1CKG_Pos (2U) +#define RCC_CKGDISR_SDMMC1CKG_Msk (0x1UL << RCC_CKGDISR_SDMMC1CKG_Pos) /*!< 0x00000004 */ +#define RCC_CKGDISR_SDMMC1CKG RCC_CKGDISR_SDMMC1CKG_Msk +#define RCC_CKGDISR_HPDMA1CKG_Pos (3U) +#define RCC_CKGDISR_HPDMA1CKG_Msk (0x1UL << RCC_CKGDISR_HPDMA1CKG_Pos) /*!< 0x00000008 */ +#define RCC_CKGDISR_HPDMA1CKG RCC_CKGDISR_HPDMA1CKG_Msk +#define RCC_CKGDISR_CPUCKG_Pos (4U) +#define RCC_CKGDISR_CPUCKG_Msk (0x1UL << RCC_CKGDISR_CPUCKG_Pos) /*!< 0x00000010 */ +#define RCC_CKGDISR_CPUCKG RCC_CKGDISR_CPUCKG_Msk +#define RCC_CKGDISR_DCMIPPCKG_Pos (8U) +#define RCC_CKGDISR_DCMIPPCKG_Msk (0x1UL << RCC_CKGDISR_DCMIPPCKG_Pos) /*!< 0x00000100 */ +#define RCC_CKGDISR_DCMIPPCKG RCC_CKGDISR_DCMIPPCKG_Msk +#define RCC_CKGDISR_DMA2DCKG_Pos (9U) +#define RCC_CKGDISR_DMA2DCKG_Msk (0x1UL << RCC_CKGDISR_DMA2DCKG_Pos) /*!< 0x00000200 */ +#define RCC_CKGDISR_DMA2DCKG RCC_CKGDISR_DMA2DCKG_Msk +#define RCC_CKGDISR_GFXMMUSCKG_Pos (10U) +#define RCC_CKGDISR_GFXMMUSCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUSCKG_Pos) /*!< 0x00000400 */ +#define RCC_CKGDISR_GFXMMUSCKG RCC_CKGDISR_GFXMMUSCKG_Msk +#define RCC_CKGDISR_GFXMMUMCKG_Pos (12U) +#define RCC_CKGDISR_GFXMMUMCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUMCKG_Pos) /*!< 0x00001000 */ +#define RCC_CKGDISR_GFXMMUMCKG RCC_CKGDISR_GFXMMUMCKG_Msk +#define RCC_CKGDISR_AHBSCKG_Pos (13U) +#define RCC_CKGDISR_AHBSCKG_Msk (0x1UL << RCC_CKGDISR_AHBSCKG_Pos) /*!< 0x00002000 */ +#define RCC_CKGDISR_AHBSCKG RCC_CKGDISR_AHBSCKG_Msk +#define RCC_CKGDISR_FMCCKG_Pos (14U) +#define RCC_CKGDISR_FMCCKG_Msk (0x1UL << RCC_CKGDISR_FMCCKG_Pos) /*!< 0x00004000 */ +#define RCC_CKGDISR_FMCCKG RCC_CKGDISR_FMCCKG_Msk +#define RCC_CKGDISR_XSPI1CKG_Pos (15U) +#define RCC_CKGDISR_XSPI1CKG_Msk (0x1UL << RCC_CKGDISR_XSPI1CKG_Pos) /*!< 0x00008000 */ +#define RCC_CKGDISR_XSPI1CKG RCC_CKGDISR_XSPI1CKG_Msk +#define RCC_CKGDISR_XSPI2CKG_Pos (16U) +#define RCC_CKGDISR_XSPI2CKG_Msk (0x1UL << RCC_CKGDISR_XSPI2CKG_Pos) /*!< 0x00010000 */ +#define RCC_CKGDISR_XSPI2CKG RCC_CKGDISR_XSPI2CKG_Msk +#define RCC_CKGDISR_AXISRAM4CKG_Pos (17U) +#define RCC_CKGDISR_AXISRAM4CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM4CKG_Pos) /*!< 0x00020000 */ +#define RCC_CKGDISR_AXISRAM4CKG RCC_CKGDISR_AXISRAM4CKG_Msk +#define RCC_CKGDISR_AXISRAM3CKG_Pos (18U) +#define RCC_CKGDISR_AXISRAM3CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM3CKG_Pos) /*!< 0x00040000 */ +#define RCC_CKGDISR_AXISRAM3CKG RCC_CKGDISR_AXISRAM3CKG_Msk +#define RCC_CKGDISR_AXISRAM2CKG_Pos (19U) +#define RCC_CKGDISR_AXISRAM2CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM2CKG_Pos) /*!< 0x00080000 */ +#define RCC_CKGDISR_AXISRAM2CKG RCC_CKGDISR_AXISRAM2CKG_Msk +#define RCC_CKGDISR_AXISRAM1CKG_Pos (20U) +#define RCC_CKGDISR_AXISRAM1CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM1CKG_Pos) /*!< 0x00100000 */ +#define RCC_CKGDISR_AXISRAM1CKG RCC_CKGDISR_AXISRAM1CKG_Msk +#define RCC_CKGDISR_FLASHCKG_Pos (21U) +#define RCC_CKGDISR_FLASHCKG_Msk (0x1UL << RCC_CKGDISR_FLASHCKG_Pos) /*!< 0x00200000 */ +#define RCC_CKGDISR_FLASHCKG RCC_CKGDISR_FLASHCKG_Msk +#define RCC_CKGDISR_EXTICKG_Pos (30U) +#define RCC_CKGDISR_EXTICKG_Msk (0x1UL << RCC_CKGDISR_EXTICKG_Pos) /*!< 0x40000000 */ +#define RCC_CKGDISR_EXTICKG RCC_CKGDISR_EXTICKG_Msk +#define RCC_CKGDISR_JTAGCKG_Pos (31U) +#define RCC_CKGDISR_JTAGCKG_Msk (0x1UL << RCC_CKGDISR_JTAGCKG_Pos) /*!< 0x80000000 */ +#define RCC_CKGDISR_JTAGCKG RCC_CKGDISR_JTAGCKG_Msk + +/******************** Bit definition for RCC_PLL1DIVR2 register *************/ +#define RCC_PLL1DIVR2_DIVS_Pos (0U) +#define RCC_PLL1DIVR2_DIVS_Msk (0x7UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL1DIVR2_DIVS RCC_PLL1DIVR2_DIVS_Msk /*!< DIVS1[2:0] bits: PLL1 DIVS division factor */ +#define RCC_PLL1DIVR2_DIVS_0 (0x1UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR2_DIVS_1 (0x2UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR2_DIVS_2 (0x4UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL2DIVR2 register *************/ +#define RCC_PLL2DIVR2_DIVS_Pos (0U) +#define RCC_PLL2DIVR2_DIVS_Msk (0x7UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL2DIVR2_DIVS RCC_PLL2DIVR2_DIVS_Msk /*!< DIVS2[2:0] bits: PLL2 DIVS division factor */ +#define RCC_PLL2DIVR2_DIVS_0 (0x1UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR2_DIVS_1 (0x2UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR2_DIVS_2 (0x4UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +#define RCC_PLL2DIVR2_DIVT_Pos (8U) +#define RCC_PLL2DIVR2_DIVT_Msk (0x7UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000700 */ +#define RCC_PLL2DIVR2_DIVT RCC_PLL2DIVR2_DIVT_Msk /*!< DIVT2[2:0] bits: PLL2 DIVT division factor */ +#define RCC_PLL2DIVR2_DIVT_0 (0x1UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000100 */ +#define RCC_PLL2DIVR2_DIVT_1 (0x2UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR2_DIVT_2 (0x4UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for RCC_PLL3DIVR2 register *************/ +#define RCC_PLL3DIVR2_DIVS_Pos (0U) +#define RCC_PLL3DIVR2_DIVS_Msk (0x7UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL3DIVR2_DIVS RCC_PLL3DIVR2_DIVS_Msk /*!< DIVS3[2:0] bits: PLL3 DIVS division factor */ +#define RCC_PLL3DIVR2_DIVS_0 (0x1UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR2_DIVS_1 (0x2UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR2_DIVS_2 (0x4UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL1SSCGR register *************/ +#define RCC_PLL1SSCGR_MODPER_Pos (0U) +#define RCC_PLL1SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL1SSCGR_MODPER RCC_PLL1SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL1SSCGR_MODPER_0 (0x0001UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL1SSCGR_MODPER_1 (0x0002UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL1SSCGR_MODPER_2 (0x0004UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL1SSCGR_MODPER_3 (0x0008UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL1SSCGR_MODPER_4 (0x0010UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL1SSCGR_MODPER_5 (0x0020UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL1SSCGR_MODPER_6 (0x0040UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL1SSCGR_MODPER_7 (0x0080UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL1SSCGR_MODPER_8 (0x0100UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL1SSCGR_MODPER_9 (0x0200UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL1SSCGR_MODPER_10 (0x0400UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL1SSCGR_MODPER_11 (0x0800UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL1SSCGR_MODPER_12 (0x1000UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL1SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL1SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL1SSCGR_TPDFNDIS RCC_PLL1SSCGR_TPDFNDIS_Msk +#define RCC_PLL1SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL1SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL1SSCGR_RPDFNDIS RCC_PLL1SSCGR_RPDFNDIS_Msk +#define RCC_PLL1SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL1SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL1SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL1SSCGR_SPREADSEL RCC_PLL1SSCGR_SPREADSEL_Msk +#define RCC_PLL1SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL1SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL1SSCGR_INCSTEP RCC_PLL1SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL1SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL1SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL1SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL1SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL1SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL1SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL1SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL1SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL1SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL1SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL1SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL1SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL1SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL1SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL1SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2SSCGR register *************/ +#define RCC_PLL2SSCGR_MODPER_Pos (0U) +#define RCC_PLL2SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL2SSCGR_MODPER RCC_PLL2SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL2SSCGR_MODPER_0 (0x0001UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL2SSCGR_MODPER_1 (0x0002UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL2SSCGR_MODPER_2 (0x0004UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL2SSCGR_MODPER_3 (0x0008UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL2SSCGR_MODPER_4 (0x0010UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL2SSCGR_MODPER_5 (0x0020UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL2SSCGR_MODPER_6 (0x0040UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL2SSCGR_MODPER_7 (0x0080UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL2SSCGR_MODPER_8 (0x0100UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL2SSCGR_MODPER_9 (0x0200UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL2SSCGR_MODPER_10 (0x0400UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL2SSCGR_MODPER_11 (0x0800UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL2SSCGR_MODPER_12 (0x1000UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL2SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL2SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL2SSCGR_TPDFNDIS RCC_PLL2SSCGR_TPDFNDIS_Msk +#define RCC_PLL2SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL2SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL2SSCGR_RPDFNDIS RCC_PLL2SSCGR_RPDFNDIS_Msk +#define RCC_PLL2SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL2SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL2SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL2SSCGR_SPREADSEL RCC_PLL2SSCGR_SPREADSEL_Msk +#define RCC_PLL2SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL2SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL2SSCGR_INCSTEP RCC_PLL2SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL2SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL2SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL2SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL2SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL2SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL2SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL2SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL2SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL2SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL2SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL2SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL2SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL2SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL2SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL2SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3SSCGR register *************/ +#define RCC_PLL3SSCGR_MODPER_Pos (0U) +#define RCC_PLL3SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL3SSCGR_MODPER RCC_PLL3SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL3SSCGR_MODPER_0 (0x0001UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL3SSCGR_MODPER_1 (0x0002UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL3SSCGR_MODPER_2 (0x0004UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL3SSCGR_MODPER_3 (0x0008UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL3SSCGR_MODPER_4 (0x0010UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL3SSCGR_MODPER_5 (0x0020UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL3SSCGR_MODPER_6 (0x0040UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL3SSCGR_MODPER_7 (0x0080UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL3SSCGR_MODPER_8 (0x0100UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL3SSCGR_MODPER_9 (0x0200UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL3SSCGR_MODPER_10 (0x0400UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL3SSCGR_MODPER_11 (0x0800UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL3SSCGR_MODPER_12 (0x1000UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL3SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL3SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL3SSCGR_TPDFNDIS RCC_PLL3SSCGR_TPDFNDIS_Msk +#define RCC_PLL3SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL3SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL3SSCGR_RPDFNDIS RCC_PLL3SSCGR_RPDFNDIS_Msk +#define RCC_PLL3SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL3SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL3SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL3SSCGR_SPREADSEL RCC_PLL3SSCGR_SPREADSEL_Msk +#define RCC_PLL3SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL3SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL3SSCGR_INCSTEP RCC_PLL3SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL3SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL3SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL3SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL3SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL3SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL3SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL3SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL3SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL3SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL3SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL3SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL3SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL3SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL3SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL3SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CKPROTR register ***************/ +#define RCC_CKPROTR_XSPICKP_Pos (0U) +#define RCC_CKPROTR_XSPICKP_Msk (0x1UL << RCC_CKPROTR_XSPICKP_Pos) /*!< 0x00000001 */ +#define RCC_CKPROTR_XSPICKP RCC_CKPROTR_XSPICKP_Msk +#define RCC_CKPROTR_FMCCKP_Pos (1U) +#define RCC_CKPROTR_FMCCKP_Msk (0x1UL << RCC_CKPROTR_FMCCKP_Pos) /*!< 0x00000002 */ +#define RCC_CKPROTR_FMCCKP RCC_CKPROTR_FMCCKP_Msk +#define RCC_CKPROTR_XSPI1SWP_Pos (4U) +#define RCC_CKPROTR_XSPI1SWP_Msk (0x7UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000070 */ +#define RCC_CKPROTR_XSPI1SWP RCC_CKPROTR_XSPI1SWP_Msk +#define RCC_CKPROTR_XSPI1SWP_0 (0x1UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000010 */ +#define RCC_CKPROTR_XSPI1SWP_1 (0x2UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000020 */ +#define RCC_CKPROTR_XSPI1SWP_2 (0x4UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000040 */ +#define RCC_CKPROTR_XSPI2SWP_Pos (8U) +#define RCC_CKPROTR_XSPI2SWP_Msk (0x7UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000700 */ +#define RCC_CKPROTR_XSPI2SWP RCC_CKPROTR_XSPI2SWP_Msk +#define RCC_CKPROTR_XSPI2SWP_0 (0x1UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000100 */ +#define RCC_CKPROTR_XSPI2SWP_1 (0x2UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000200 */ +#define RCC_CKPROTR_XSPI2SWP_2 (0x4UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000400 */ +#define RCC_CKPROTR_FMCSWP_Pos (12U) +#define RCC_CKPROTR_FMCSWP_Msk (0x7UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00007000 */ +#define RCC_CKPROTR_FMCSWP RCC_CKPROTR_FMCSWP_Msk +#define RCC_CKPROTR_FMCSWP_0 (0x1UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00001000 */ +#define RCC_CKPROTR_FMCSWP_1 (0x2UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00002000 */ +#define RCC_CKPROTR_FMCSWP_2 (0x4UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_RSR register *******************/ +#define RCC_RSR_RMVF_Pos (16U) +#define RCC_RSR_RMVF_Msk (0x1UL << RCC_RSR_RMVF_Pos) /*!< 0x00010000 */ +#define RCC_RSR_RMVF RCC_RSR_RMVF_Msk +#define RCC_RSR_OBLRSTF_Pos (17U) +#define RCC_RSR_OBLRSTF_Msk (0x1UL << RCC_RSR_OBLRSTF_Pos) /*!< 0x00020000 */ +#define RCC_RSR_OBLRSTF RCC_RSR_OBLRSTF_Msk +#define RCC_RSR_BORRSTF_Pos (21U) +#define RCC_RSR_BORRSTF_Msk (0x1UL << RCC_RSR_BORRSTF_Pos) /*!< 0x00200000 */ +#define RCC_RSR_BORRSTF RCC_RSR_BORRSTF_Msk +#define RCC_RSR_PINRSTF_Pos (22U) +#define RCC_RSR_PINRSTF_Msk (0x1UL << RCC_RSR_PINRSTF_Pos) /*!< 0x00400000 */ +#define RCC_RSR_PINRSTF RCC_RSR_PINRSTF_Msk +#define RCC_RSR_PORRSTF_Pos (23U) +#define RCC_RSR_PORRSTF_Msk (0x1UL << RCC_RSR_PORRSTF_Pos) /*!< 0x00800000 */ +#define RCC_RSR_PORRSTF RCC_RSR_PORRSTF_Msk +#define RCC_RSR_SFTRSTF_Pos (24U) +#define RCC_RSR_SFTRSTF_Msk (0x1UL << RCC_RSR_SFTRSTF_Pos) /*!< 0x01000000 */ +#define RCC_RSR_SFTRSTF RCC_RSR_SFTRSTF_Msk +#define RCC_RSR_IWDGRSTF_Pos (26U) +#define RCC_RSR_IWDGRSTF_Msk (0x1UL << RCC_RSR_IWDGRSTF_Pos) /*!< 0x04000000 */ +#define RCC_RSR_IWDGRSTF RCC_RSR_IWDGRSTF_Msk +#define RCC_RSR_WWDGRSTF_Pos (28U) +#define RCC_RSR_WWDGRSTF_Msk (0x1UL << RCC_RSR_WWDGRSTF_Pos) /*!< 0x10000000 */ +#define RCC_RSR_WWDGRSTF RCC_RSR_WWDGRSTF_Msk +#define RCC_RSR_LPWRRSTF_Pos (30U) +#define RCC_RSR_LPWRRSTF_Msk (0x1UL << RCC_RSR_LPWRRSTF_Pos) /*!< 0x40000000 */ +#define RCC_RSR_LPWRRSTF RCC_RSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_AHB1ENR register ***************/ +#define RCC_AHB1ENR_GPDMA1EN_Pos (4U) +#define RCC_AHB1ENR_GPDMA1EN_Msk (0x1UL << RCC_AHB1ENR_GPDMA1EN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1ENR_GPDMA1EN RCC_AHB1ENR_GPDMA1EN_Msk +#define RCC_AHB1ENR_ADC12EN_Pos (5U) +#define RCC_AHB1ENR_ADC12EN_Msk (0x1UL << RCC_AHB1ENR_ADC12EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1ENR_ADC12EN RCC_AHB1ENR_ADC12EN_Msk +#define RCC_AHB1ENR_ETH1MACEN_Pos (15U) +#define RCC_AHB1ENR_ETH1MACEN_Msk (0x1UL << RCC_AHB1ENR_ETH1MACEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1ENR_ETH1MACEN RCC_AHB1ENR_ETH1MACEN_Msk +#define RCC_AHB1ENR_ETH1TXEN_Pos (16U) +#define RCC_AHB1ENR_ETH1TXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1TXEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_ETH1TXEN RCC_AHB1ENR_ETH1TXEN_Msk +#define RCC_AHB1ENR_ETH1RXEN_Pos (17U) +#define RCC_AHB1ENR_ETH1RXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1RXEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1ENR_ETH1RXEN RCC_AHB1ENR_ETH1RXEN_Msk +#define RCC_AHB1ENR_OTGHSEN_Pos (25U) +#define RCC_AHB1ENR_OTGHSEN_Msk (0x1UL << RCC_AHB1ENR_OTGHSEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1ENR_OTGHSEN RCC_AHB1ENR_OTGHSEN_Msk +#define RCC_AHB1ENR_USBPHYCEN_Pos (26U) +#define RCC_AHB1ENR_USBPHYCEN_Msk (0x1UL << RCC_AHB1ENR_USBPHYCEN_Pos) /*!< 0x04000000 */ +#define RCC_AHB1ENR_USBPHYCEN RCC_AHB1ENR_USBPHYCEN_Msk +#define RCC_AHB1ENR_OTGFSEN_Pos (27U) +#define RCC_AHB1ENR_OTGFSEN_Msk (0x1UL << RCC_AHB1ENR_OTGFSEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1ENR_OTGFSEN RCC_AHB1ENR_OTGFSEN_Msk +#define RCC_AHB1ENR_ADF1EN_Pos (31U) +#define RCC_AHB1ENR_ADF1EN_Msk (0x1UL << RCC_AHB1ENR_ADF1EN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1ENR_ADF1EN RCC_AHB1ENR_ADF1EN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_PSSIEN_Pos (1U) +#define RCC_AHB2ENR_PSSIEN_Msk (0x1UL << RCC_AHB2ENR_PSSIEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_PSSIEN RCC_AHB2ENR_PSSIEN_Msk +#define RCC_AHB2ENR_SDMMC2EN_Pos (9U) +#define RCC_AHB2ENR_SDMMC2EN_Msk (0x1UL << RCC_AHB2ENR_SDMMC2EN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2ENR_SDMMC2EN RCC_AHB2ENR_SDMMC2EN_Msk +#define RCC_AHB2ENR_CORDICEN_Pos (14U) +#define RCC_AHB2ENR_CORDICEN_Msk (0x1UL << RCC_AHB2ENR_CORDICEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2ENR_CORDICEN RCC_AHB2ENR_CORDICEN_Msk +#define RCC_AHB2ENR_SRAM1EN_Pos (29U) +#define RCC_AHB2ENR_SRAM1EN_Msk (0x1UL << RCC_AHB2ENR_SRAM1EN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2ENR_SRAM1EN RCC_AHB2ENR_SRAM1EN_Msk +#define RCC_AHB2ENR_SRAM2EN_Pos (30U) +#define RCC_AHB2ENR_SRAM2EN_Msk (0x1UL << RCC_AHB2ENR_SRAM2EN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2ENR_SRAM2EN RCC_AHB2ENR_SRAM2EN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_RNGEN_Pos (0U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HASHEN_Pos (1U) +#define RCC_AHB3ENR_HASHEN_Msk (0x1UL << RCC_AHB3ENR_HASHEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3ENR_HASHEN RCC_AHB3ENR_HASHEN_Msk +#define RCC_AHB3ENR_PKAEN_Pos (6U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk + +/******************** Bit definition for RCC_AHB4ENR register ***************/ +#define RCC_AHB4ENR_GPIOAEN_Pos (0U) +#define RCC_AHB4ENR_GPIOAEN_Msk (0x1UL << RCC_AHB4ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4ENR_GPIOAEN RCC_AHB4ENR_GPIOAEN_Msk +#define RCC_AHB4ENR_GPIOBEN_Pos (1U) +#define RCC_AHB4ENR_GPIOBEN_Msk (0x1UL << RCC_AHB4ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4ENR_GPIOBEN RCC_AHB4ENR_GPIOBEN_Msk +#define RCC_AHB4ENR_GPIOCEN_Pos (2U) +#define RCC_AHB4ENR_GPIOCEN_Msk (0x1UL << RCC_AHB4ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4ENR_GPIOCEN RCC_AHB4ENR_GPIOCEN_Msk +#define RCC_AHB4ENR_GPIODEN_Pos (3U) +#define RCC_AHB4ENR_GPIODEN_Msk (0x1UL << RCC_AHB4ENR_GPIODEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4ENR_GPIODEN RCC_AHB4ENR_GPIODEN_Msk +#define RCC_AHB4ENR_GPIOEEN_Pos (4U) +#define RCC_AHB4ENR_GPIOEEN_Msk (0x1UL << RCC_AHB4ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4ENR_GPIOEEN RCC_AHB4ENR_GPIOEEN_Msk +#define RCC_AHB4ENR_GPIOFEN_Pos (5U) +#define RCC_AHB4ENR_GPIOFEN_Msk (0x1UL << RCC_AHB4ENR_GPIOFEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4ENR_GPIOFEN RCC_AHB4ENR_GPIOFEN_Msk +#define RCC_AHB4ENR_GPIOGEN_Pos (6U) +#define RCC_AHB4ENR_GPIOGEN_Msk (0x1UL << RCC_AHB4ENR_GPIOGEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4ENR_GPIOGEN RCC_AHB4ENR_GPIOGEN_Msk +#define RCC_AHB4ENR_GPIOHEN_Pos (7U) +#define RCC_AHB4ENR_GPIOHEN_Msk (0x1UL << RCC_AHB4ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4ENR_GPIOHEN RCC_AHB4ENR_GPIOHEN_Msk +#define RCC_AHB4ENR_GPIOMEN_Pos (12U) +#define RCC_AHB4ENR_GPIOMEN_Msk (0x1UL << RCC_AHB4ENR_GPIOMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4ENR_GPIOMEN RCC_AHB4ENR_GPIOMEN_Msk +#define RCC_AHB4ENR_GPIONEN_Pos (13U) +#define RCC_AHB4ENR_GPIONEN_Msk (0x1UL << RCC_AHB4ENR_GPIONEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4ENR_GPIONEN RCC_AHB4ENR_GPIONEN_Msk +#define RCC_AHB4ENR_GPIOOEN_Pos (14U) +#define RCC_AHB4ENR_GPIOOEN_Msk (0x1UL << RCC_AHB4ENR_GPIOOEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4ENR_GPIOOEN RCC_AHB4ENR_GPIOOEN_Msk +#define RCC_AHB4ENR_GPIOPEN_Pos (15U) +#define RCC_AHB4ENR_GPIOPEN_Msk (0x1UL << RCC_AHB4ENR_GPIOPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4ENR_GPIOPEN RCC_AHB4ENR_GPIOPEN_Msk +#define RCC_AHB4ENR_CRCEN_Pos (19U) +#define RCC_AHB4ENR_CRCEN_Msk (0x1UL << RCC_AHB4ENR_CRCEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4ENR_CRCEN RCC_AHB4ENR_CRCEN_Msk +#define RCC_AHB4ENR_BKPRAMEN_Pos (28U) +#define RCC_AHB4ENR_BKPRAMEN_Msk (0x1UL << RCC_AHB4ENR_BKPRAMEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4ENR_BKPRAMEN RCC_AHB4ENR_BKPRAMEN_Msk + +/******************** Bit definition for RCC_AHB5ENR register ***************/ +#define RCC_AHB5ENR_HPDMA1EN_Pos (0U) +#define RCC_AHB5ENR_HPDMA1EN_Msk (0x1UL << RCC_AHB5ENR_HPDMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5ENR_HPDMA1EN RCC_AHB5ENR_HPDMA1EN_Msk +#define RCC_AHB5ENR_DMA2DEN_Pos (1U) +#define RCC_AHB5ENR_DMA2DEN_Msk (0x1UL << RCC_AHB5ENR_DMA2DEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5ENR_DMA2DEN RCC_AHB5ENR_DMA2DEN_Msk +#define RCC_AHB5ENR_JPEGEN_Pos (3U) +#define RCC_AHB5ENR_JPEGEN_Msk (0x1UL << RCC_AHB5ENR_JPEGEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5ENR_JPEGEN RCC_AHB5ENR_JPEGEN_Msk +#define RCC_AHB5ENR_FMCEN_Pos (4U) +#define RCC_AHB5ENR_FMCEN_Msk (0x1UL << RCC_AHB5ENR_FMCEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5ENR_FMCEN RCC_AHB5ENR_FMCEN_Msk +#define RCC_AHB5ENR_XSPI1EN_Pos (5U) +#define RCC_AHB5ENR_XSPI1EN_Msk (0x1UL << RCC_AHB5ENR_XSPI1EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5ENR_XSPI1EN RCC_AHB5ENR_XSPI1EN_Msk +#define RCC_AHB5ENR_SDMMC1EN_Pos (8U) +#define RCC_AHB5ENR_SDMMC1EN_Msk (0x1UL << RCC_AHB5ENR_SDMMC1EN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5ENR_SDMMC1EN RCC_AHB5ENR_SDMMC1EN_Msk +#define RCC_AHB5ENR_XSPI2EN_Pos (12U) +#define RCC_AHB5ENR_XSPI2EN_Msk (0x1UL << RCC_AHB5ENR_XSPI2EN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5ENR_XSPI2EN RCC_AHB5ENR_XSPI2EN_Msk +#define RCC_AHB5ENR_XSPIMEN_Pos (14U) +#define RCC_AHB5ENR_XSPIMEN_Msk (0x1UL << RCC_AHB5ENR_XSPIMEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5ENR_XSPIMEN RCC_AHB5ENR_XSPIMEN_Msk +#define RCC_AHB5ENR_GFXMMUEN_Pos (19U) +#define RCC_AHB5ENR_GFXMMUEN_Msk (0x1UL << RCC_AHB5ENR_GFXMMUEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5ENR_GFXMMUEN RCC_AHB5ENR_GFXMMUEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_TIM3EN_Pos (1U) +#define RCC_APB1ENR1_TIM3EN_Msk (0x1UL << RCC_APB1ENR1_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR1_TIM3EN RCC_APB1ENR1_TIM3EN_Msk +#define RCC_APB1ENR1_TIM4EN_Pos (2U) +#define RCC_APB1ENR1_TIM4EN_Msk (0x1UL << RCC_APB1ENR1_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR1_TIM4EN RCC_APB1ENR1_TIM4EN_Msk +#define RCC_APB1ENR1_TIM5EN_Pos (3U) +#define RCC_APB1ENR1_TIM5EN_Msk (0x1UL << RCC_APB1ENR1_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR1_TIM5EN RCC_APB1ENR1_TIM5EN_Msk +#define RCC_APB1ENR1_TIM6EN_Pos (4U) +#define RCC_APB1ENR1_TIM6EN_Msk (0x1UL << RCC_APB1ENR1_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR1_TIM6EN RCC_APB1ENR1_TIM6EN_Msk +#define RCC_APB1ENR1_TIM7EN_Pos (5U) +#define RCC_APB1ENR1_TIM7EN_Msk (0x1UL << RCC_APB1ENR1_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR1_TIM7EN RCC_APB1ENR1_TIM7EN_Msk +#define RCC_APB1ENR1_TIM12EN_Pos (6U) +#define RCC_APB1ENR1_TIM12EN_Msk (0x1UL << RCC_APB1ENR1_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR1_TIM12EN RCC_APB1ENR1_TIM12EN_Msk +#define RCC_APB1ENR1_TIM13EN_Pos (7U) +#define RCC_APB1ENR1_TIM13EN_Msk (0x1UL << RCC_APB1ENR1_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR1_TIM13EN RCC_APB1ENR1_TIM13EN_Msk +#define RCC_APB1ENR1_TIM14EN_Pos (8U) +#define RCC_APB1ENR1_TIM14EN_Msk (0x1UL << RCC_APB1ENR1_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR1_TIM14EN RCC_APB1ENR1_TIM14EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (9U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_SPI2EN_Pos (14U) +#define RCC_APB1ENR1_SPI2EN_Msk (0x1UL << RCC_APB1ENR1_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR1_SPI2EN RCC_APB1ENR1_SPI2EN_Msk +#define RCC_APB1ENR1_SPI3EN_Pos (15U) +#define RCC_APB1ENR1_SPI3EN_Msk (0x1UL << RCC_APB1ENR1_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR1_SPI3EN RCC_APB1ENR1_SPI3EN_Msk +#define RCC_APB1ENR1_SPDIFRXEN_Pos (16U) +#define RCC_APB1ENR1_SPDIFRXEN_Msk (0x1UL << RCC_APB1ENR1_SPDIFRXEN_Pos) /*!< 0x00010000 */ +#define RCC_APB1ENR1_SPDIFRXEN RCC_APB1ENR1_SPDIFRXEN_Msk +#define RCC_APB1ENR1_USART2EN_Pos (17U) +#define RCC_APB1ENR1_USART2EN_Msk (0x1UL << RCC_APB1ENR1_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR1_USART2EN RCC_APB1ENR1_USART2EN_Msk +#define RCC_APB1ENR1_USART3EN_Pos (18U) +#define RCC_APB1ENR1_USART3EN_Msk (0x1UL << RCC_APB1ENR1_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR1_USART3EN RCC_APB1ENR1_USART3EN_Msk +#define RCC_APB1ENR1_UART4EN_Pos (19U) +#define RCC_APB1ENR1_UART4EN_Msk (0x1UL << RCC_APB1ENR1_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR1_UART4EN RCC_APB1ENR1_UART4EN_Msk +#define RCC_APB1ENR1_UART5EN_Pos (20U) +#define RCC_APB1ENR1_UART5EN_Msk (0x1UL << RCC_APB1ENR1_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR1_UART5EN RCC_APB1ENR1_UART5EN_Msk +#define RCC_APB1ENR1_I2C1_I3C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1_I3C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1_I3C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1_I3C1EN RCC_APB1ENR1_I2C1_I3C1EN_Msk +#define RCC_APB1ENR1_I2C2EN_Pos (22U) +#define RCC_APB1ENR1_I2C2EN_Msk (0x1UL << RCC_APB1ENR1_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR1_I2C2EN RCC_APB1ENR1_I2C2EN_Msk +#define RCC_APB1ENR1_I2C3EN_Pos (23U) +#define RCC_APB1ENR1_I2C3EN_Msk (0x1UL << RCC_APB1ENR1_I2C3EN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR1_I2C3EN RCC_APB1ENR1_I2C3EN_Msk +#define RCC_APB1ENR1_CECEN_Pos (27U) +#define RCC_APB1ENR1_CECEN_Msk (0x1UL << RCC_APB1ENR1_CECEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR1_CECEN RCC_APB1ENR1_CECEN_Msk +#define RCC_APB1ENR1_UART7EN_Pos (30U) +#define RCC_APB1ENR1_UART7EN_Msk (0x1UL << RCC_APB1ENR1_UART7EN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR1_UART7EN RCC_APB1ENR1_UART7EN_Msk +#define RCC_APB1ENR1_UART8EN_Pos (31U) +#define RCC_APB1ENR1_UART8EN_Msk (0x1UL << RCC_APB1ENR1_UART8EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_UART8EN RCC_APB1ENR1_UART8EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_CRSEN_Pos (1U) +#define RCC_APB1ENR2_CRSEN_Msk (0x1UL << RCC_APB1ENR2_CRSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR2_CRSEN RCC_APB1ENR2_CRSEN_Msk +#define RCC_APB1ENR2_MDIOSEN_Pos (5U) +#define RCC_APB1ENR2_MDIOSEN_Msk (0x1UL << RCC_APB1ENR2_MDIOSEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_MDIOSEN RCC_APB1ENR2_MDIOSEN_Msk +#define RCC_APB1ENR2_FDCANEN_Pos (8U) +#define RCC_APB1ENR2_FDCANEN_Msk (0x1UL << RCC_APB1ENR2_FDCANEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR2_FDCANEN RCC_APB1ENR2_FDCANEN_Msk +#define RCC_APB1ENR2_UCPD1EN_Pos (27U) +#define RCC_APB1ENR2_UCPD1EN_Msk (0x1UL << RCC_APB1ENR2_UCPD1EN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR2_UCPD1EN RCC_APB1ENR2_UCPD1EN_Msk + +/******************** Bit definition for RCC_APB2ENR register ***************/ +#define RCC_APB2ENR_TIM1EN_Pos (0U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (4U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_SPI4EN_Pos (13U) +#define RCC_APB2ENR_SPI4EN_Msk (0x1UL << RCC_APB2ENR_SPI4EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_SPI4EN RCC_APB2ENR_SPI4EN_Msk +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk +#define RCC_APB2ENR_SPI5EN_Pos (20U) +#define RCC_APB2ENR_SPI5EN_Msk (0x1UL << RCC_APB2ENR_SPI5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_SPI5EN RCC_APB2ENR_SPI5EN_Msk +#define RCC_APB2ENR_SAI1EN_Pos (22U) +#define RCC_APB2ENR_SAI1EN_Msk (0x1UL << RCC_APB2ENR_SAI1EN_Pos) /*!< 0x00400000 */ +#define RCC_APB2ENR_SAI1EN RCC_APB2ENR_SAI1EN_Msk +#define RCC_APB2ENR_SAI2EN_Pos (23U) +#define RCC_APB2ENR_SAI2EN_Msk (0x1UL << RCC_APB2ENR_SAI2EN_Pos) /*!< 0x00800000 */ +#define RCC_APB2ENR_SAI2EN RCC_APB2ENR_SAI2EN_Msk + +/******************** Bit definition for RCC_APB4ENR register ***************/ +#define RCC_APB4ENR_SBSEN_Pos (1U) +#define RCC_APB4ENR_SBSEN_Msk (0x1UL << RCC_APB4ENR_SBSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4ENR_SBSEN RCC_APB4ENR_SBSEN_Msk +#define RCC_APB4ENR_LPUART1EN_Pos (3U) +#define RCC_APB4ENR_LPUART1EN_Msk (0x1UL << RCC_APB4ENR_LPUART1EN_Pos) /*!< 0x00000008 */ +#define RCC_APB4ENR_LPUART1EN RCC_APB4ENR_LPUART1EN_Msk +#define RCC_APB4ENR_SPI6EN_Pos (5U) +#define RCC_APB4ENR_SPI6EN_Msk (0x1UL << RCC_APB4ENR_SPI6EN_Pos) /*!< 0x00000020 */ +#define RCC_APB4ENR_SPI6EN RCC_APB4ENR_SPI6EN_Msk +#define RCC_APB4ENR_LPTIM2EN_Pos (9U) +#define RCC_APB4ENR_LPTIM2EN_Msk (0x1UL << RCC_APB4ENR_LPTIM2EN_Pos) /*!< 0x00000200 */ +#define RCC_APB4ENR_LPTIM2EN RCC_APB4ENR_LPTIM2EN_Msk +#define RCC_APB4ENR_LPTIM3EN_Pos (10U) +#define RCC_APB4ENR_LPTIM3EN_Msk (0x1UL << RCC_APB4ENR_LPTIM3EN_Pos) /*!< 0x00000400 */ +#define RCC_APB4ENR_LPTIM3EN RCC_APB4ENR_LPTIM3EN_Msk +#define RCC_APB4ENR_LPTIM4EN_Pos (11U) +#define RCC_APB4ENR_LPTIM4EN_Msk (0x1UL << RCC_APB4ENR_LPTIM4EN_Pos) /*!< 0x00000800 */ +#define RCC_APB4ENR_LPTIM4EN RCC_APB4ENR_LPTIM4EN_Msk +#define RCC_APB4ENR_LPTIM5EN_Pos (12U) +#define RCC_APB4ENR_LPTIM5EN_Msk (0x1UL << RCC_APB4ENR_LPTIM5EN_Pos) /*!< 0x00001000 */ +#define RCC_APB4ENR_LPTIM5EN RCC_APB4ENR_LPTIM5EN_Msk +#define RCC_APB4ENR_VREFEN_Pos (15U) +#define RCC_APB4ENR_VREFEN_Msk (0x1UL << RCC_APB4ENR_VREFEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4ENR_VREFEN RCC_APB4ENR_VREFEN_Msk +#define RCC_APB4ENR_RTCAPBEN_Pos (16U) +#define RCC_APB4ENR_RTCAPBEN_Msk (0x1UL << RCC_APB4ENR_RTCAPBEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4ENR_RTCAPBEN RCC_APB4ENR_RTCAPBEN_Msk +#define RCC_APB4ENR_DTSEN_Pos (26U) +#define RCC_APB4ENR_DTSEN_Msk (0x1UL << RCC_APB4ENR_DTSEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4ENR_DTSEN RCC_APB4ENR_DTSEN_Msk + +/******************** Bit definition for RCC_APB5ENR register ***************/ +#define RCC_APB5ENR_DCMIPPEN_Pos (2U) +#define RCC_APB5ENR_DCMIPPEN_Msk (0x1UL << RCC_APB5ENR_DCMIPPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5ENR_DCMIPPEN RCC_APB5ENR_DCMIPPEN_Msk +#define RCC_APB5ENR_GFXTIMEN_Pos (4U) +#define RCC_APB5ENR_GFXTIMEN_Msk (0x1UL << RCC_APB5ENR_GFXTIMEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5ENR_GFXTIMEN RCC_APB5ENR_GFXTIMEN_Msk + +/******************** Bit definition for RCC_AHB1LPENR register *************/ +#define RCC_AHB1LPENR_GPDMA1LPEN_Pos (4U) +#define RCC_AHB1LPENR_GPDMA1LPEN_Msk (0x1UL << RCC_AHB1LPENR_GPDMA1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1LPENR_GPDMA1LPEN RCC_AHB1LPENR_GPDMA1LPEN_Msk +#define RCC_AHB1LPENR_ADC12LPEN_Pos (5U) +#define RCC_AHB1LPENR_ADC12LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADC12LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1LPENR_ADC12LPEN RCC_AHB1LPENR_ADC12LPEN_Msk +#define RCC_AHB1LPENR_ETH1MACLPEN_Pos (15U) +#define RCC_AHB1LPENR_ETH1MACLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1MACLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1LPENR_ETH1MACLPEN RCC_AHB1LPENR_ETH1MACLPEN_Msk +#define RCC_AHB1LPENR_ETH1TXLPEN_Pos (16U) +#define RCC_AHB1LPENR_ETH1TXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1TXLPEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1LPENR_ETH1TXLPEN RCC_AHB1LPENR_ETH1TXLPEN_Msk +#define RCC_AHB1LPENR_ETH1RXLPEN_Pos (17U) +#define RCC_AHB1LPENR_ETH1RXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1RXLPEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1LPENR_ETH1RXLPEN RCC_AHB1LPENR_ETH1RXLPEN_Msk +#define RCC_AHB1LPENR_UCPDCTRL_Pos (24U) +#define RCC_AHB1LPENR_UCPDCTRL_Msk (0x1UL << RCC_AHB1LPENR_UCPDCTRL_Pos) /*!< 0x01000000 */ +#define RCC_AHB1LPENR_UCPDCTRL RCC_AHB1LPENR_UCPDCTRL_Msk +#define RCC_AHB1LPENR_OTGHSLPEN_Pos (25U) +#define RCC_AHB1LPENR_OTGHSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGHSLPEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1LPENR_OTGHSLPEN RCC_AHB1LPENR_OTGHSLPEN_Msk +#define RCC_AHB1LPENR_USBPHYCLPEN_Pos (26U) +#define RCC_AHB1LPENR_USBPHYCLPEN_Msk (0x1UL << RCC_AHB1LPENR_USBPHYCLPEN_Pos)/*!< 0x04000000 */ +#define RCC_AHB1LPENR_USBPHYCLPEN RCC_AHB1LPENR_USBPHYCLPEN_Msk +#define RCC_AHB1LPENR_OTGFSLPEN_Pos (27U) +#define RCC_AHB1LPENR_OTGFSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGFSLPEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1LPENR_OTGFSLPEN RCC_AHB1LPENR_OTGFSLPEN_Msk +#define RCC_AHB1LPENR_ADF1LPEN_Pos (31U) +#define RCC_AHB1LPENR_ADF1LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADF1LPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1LPENR_ADF1LPEN RCC_AHB1LPENR_ADF1LPEN_Msk + +/******************** Bit definition for RCC_AHB2LPENR register *************/ +#define RCC_AHB2LPENR_PSSILPEN_Pos (1U) +#define RCC_AHB2LPENR_PSSILPEN_Msk (0x1UL << RCC_AHB2LPENR_PSSILPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2LPENR_PSSILPEN RCC_AHB2LPENR_PSSILPEN_Msk +#define RCC_AHB2LPENR_SDMMC2LPEN_Pos (9U) +#define RCC_AHB2LPENR_SDMMC2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SDMMC2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2LPENR_SDMMC2LPEN RCC_AHB2LPENR_SDMMC2LPEN_Msk +#define RCC_AHB2LPENR_CORDICLPEN_Pos (14U) +#define RCC_AHB2LPENR_CORDICLPEN_Msk (0x1UL << RCC_AHB2LPENR_CORDICLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2LPENR_CORDICLPEN RCC_AHB2LPENR_CORDICLPEN_Msk +#define RCC_AHB2LPENR_SRAM1LPEN_Pos (29U) +#define RCC_AHB2LPENR_SRAM1LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM1LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2LPENR_SRAM1LPEN RCC_AHB2LPENR_SRAM1LPEN_Msk +#define RCC_AHB2LPENR_SRAM2LPEN_Pos (30U) +#define RCC_AHB2LPENR_SRAM2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM2LPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2LPENR_SRAM2LPEN RCC_AHB2LPENR_SRAM2LPEN_Msk + +/******************** Bit definition for RCC_AHB3LPENR register *************/ +#define RCC_AHB3LPENR_RNGLPEN_Pos (0U) +#define RCC_AHB3LPENR_RNGLPEN_Msk (0x1UL << RCC_AHB3LPENR_RNGLPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3LPENR_RNGLPEN RCC_AHB3LPENR_RNGLPEN_Msk +#define RCC_AHB3LPENR_HASHLPEN_Pos (1U) +#define RCC_AHB3LPENR_HASHLPEN_Msk (0x1UL << RCC_AHB3LPENR_HASHLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3LPENR_HASHLPEN RCC_AHB3LPENR_HASHLPEN_Msk +#define RCC_AHB3LPENR_PKALPEN_Pos (6U) +#define RCC_AHB3LPENR_PKALPEN_Msk (0x1UL << RCC_AHB3LPENR_PKALPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3LPENR_PKALPEN RCC_AHB3LPENR_PKALPEN_Msk + +/******************** Bit definition for RCC_AHB4LPENR register *************/ +#define RCC_AHB4LPENR_GPIOALPEN_Pos (0U) +#define RCC_AHB4LPENR_GPIOALPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOALPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4LPENR_GPIOALPEN RCC_AHB4LPENR_GPIOALPEN_Msk +#define RCC_AHB4LPENR_GPIOBLPEN_Pos (1U) +#define RCC_AHB4LPENR_GPIOBLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOBLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4LPENR_GPIOBLPEN RCC_AHB4LPENR_GPIOBLPEN_Msk +#define RCC_AHB4LPENR_GPIOCLPEN_Pos (2U) +#define RCC_AHB4LPENR_GPIOCLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOCLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4LPENR_GPIOCLPEN RCC_AHB4LPENR_GPIOCLPEN_Msk +#define RCC_AHB4LPENR_GPIODLPEN_Pos (3U) +#define RCC_AHB4LPENR_GPIODLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIODLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4LPENR_GPIODLPEN RCC_AHB4LPENR_GPIODLPEN_Msk +#define RCC_AHB4LPENR_GPIOELPEN_Pos (4U) +#define RCC_AHB4LPENR_GPIOELPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOELPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4LPENR_GPIOELPEN RCC_AHB4LPENR_GPIOELPEN_Msk +#define RCC_AHB4LPENR_GPIOFLPEN_Pos (5U) +#define RCC_AHB4LPENR_GPIOFLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOFLPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4LPENR_GPIOFLPEN RCC_AHB4LPENR_GPIOFLPEN_Msk +#define RCC_AHB4LPENR_GPIOGLPEN_Pos (6U) +#define RCC_AHB4LPENR_GPIOGLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOGLPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4LPENR_GPIOGLPEN RCC_AHB4LPENR_GPIOGLPEN_Msk +#define RCC_AHB4LPENR_GPIOHLPEN_Pos (7U) +#define RCC_AHB4LPENR_GPIOHLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOHLPEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4LPENR_GPIOHLPEN RCC_AHB4LPENR_GPIOHLPEN_Msk +#define RCC_AHB4LPENR_GPIOMLPEN_Pos (12U) +#define RCC_AHB4LPENR_GPIOMLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOMLPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4LPENR_GPIOMLPEN RCC_AHB4LPENR_GPIOMLPEN_Msk +#define RCC_AHB4LPENR_GPIONLPEN_Pos (13U) +#define RCC_AHB4LPENR_GPIONLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIONLPEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4LPENR_GPIONLPEN RCC_AHB4LPENR_GPIONLPEN_Msk +#define RCC_AHB4LPENR_GPIOOLPEN_Pos (14U) +#define RCC_AHB4LPENR_GPIOOLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOOLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4LPENR_GPIOOLPEN RCC_AHB4LPENR_GPIOOLPEN_Msk +#define RCC_AHB4LPENR_GPIOPLPEN_Pos (15U) +#define RCC_AHB4LPENR_GPIOPLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOPLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4LPENR_GPIOPLPEN RCC_AHB4LPENR_GPIOPLPEN_Msk +#define RCC_AHB4LPENR_CRCLPEN_Pos (19U) +#define RCC_AHB4LPENR_CRCLPEN_Msk (0x1UL << RCC_AHB4LPENR_CRCLPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4LPENR_CRCLPEN RCC_AHB4LPENR_CRCLPEN_Msk +#define RCC_AHB4LPENR_BKPRAMLPEN_Pos (28U) +#define RCC_AHB4LPENR_BKPRAMLPEN_Msk (0x1UL << RCC_AHB4LPENR_BKPRAMLPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4LPENR_BKPRAMLPEN RCC_AHB4LPENR_BKPRAMLPEN_Msk + +/******************** Bit definition for RCC_AHB5LPENR register *************/ +#define RCC_AHB5LPENR_HPDMA1LPEN_Pos (0U) +#define RCC_AHB5LPENR_HPDMA1LPEN_Msk (0x1UL << RCC_AHB5LPENR_HPDMA1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5LPENR_HPDMA1LPEN RCC_AHB5LPENR_HPDMA1LPEN_Msk +#define RCC_AHB5LPENR_DMA2DLPEN_Pos (1U) +#define RCC_AHB5LPENR_DMA2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_DMA2DLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5LPENR_DMA2DLPEN RCC_AHB5LPENR_DMA2DLPEN_Msk +#define RCC_AHB5LPENR_FLASHLPEN_Pos (2U) +#define RCC_AHB5LPENR_FLASHLPEN_Msk (0x1UL << RCC_AHB5LPENR_FLASHLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB5LPENR_FLASHLPEN RCC_AHB5LPENR_FLASHLPEN_Msk +#define RCC_AHB5LPENR_JPEGLPEN_Pos (3U) +#define RCC_AHB5LPENR_JPEGLPEN_Msk (0x1UL << RCC_AHB5LPENR_JPEGLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5LPENR_JPEGLPEN RCC_AHB5LPENR_JPEGLPEN_Msk +#define RCC_AHB5LPENR_FMCLPEN_Pos (4U) +#define RCC_AHB5LPENR_FMCLPEN_Msk (0x1UL << RCC_AHB5LPENR_FMCLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5LPENR_FMCLPEN RCC_AHB5LPENR_FMCLPEN_Msk +#define RCC_AHB5LPENR_XSPI1LPEN_Pos (5U) +#define RCC_AHB5LPENR_XSPI1LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI1LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5LPENR_XSPI1LPEN RCC_AHB5LPENR_XSPI1LPEN_Msk +#define RCC_AHB5LPENR_SDMMC1LPEN_Pos (8U) +#define RCC_AHB5LPENR_SDMMC1LPEN_Msk (0x1UL << RCC_AHB5LPENR_SDMMC1LPEN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5LPENR_SDMMC1LPEN RCC_AHB5LPENR_SDMMC1LPEN_Msk +#define RCC_AHB5LPENR_XSPI2LPEN_Pos (12U) +#define RCC_AHB5LPENR_XSPI2LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI2LPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5LPENR_XSPI2LPEN RCC_AHB5LPENR_XSPI2LPEN_Msk +#define RCC_AHB5LPENR_XSPIMLPEN_Pos (14U) +#define RCC_AHB5LPENR_XSPIMLPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPIMLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5LPENR_XSPIMLPEN RCC_AHB5LPENR_XSPIMLPEN_Msk +#define RCC_AHB5LPENR_GFXMMULPEN_Pos (19U) +#define RCC_AHB5LPENR_GFXMMULPEN_Msk (0x1UL << RCC_AHB5LPENR_GFXMMULPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5LPENR_GFXMMULPEN RCC_AHB5LPENR_GFXMMULPEN_Msk +#define RCC_AHB5LPENR_DTCM1LPEN_Pos (28U) +#define RCC_AHB5LPENR_DTCM1LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM1LPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB5LPENR_DTCM1LPEN RCC_AHB5LPENR_DTCM1LPEN_Msk +#define RCC_AHB5LPENR_DTCM2LPEN_Pos (29U) +#define RCC_AHB5LPENR_DTCM2LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM2LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB5LPENR_DTCM2LPEN RCC_AHB5LPENR_DTCM2LPEN_Msk +#define RCC_AHB5LPENR_ITCMLPEN_Pos (30U) +#define RCC_AHB5LPENR_ITCMLPEN_Msk (0x1UL << RCC_AHB5LPENR_ITCMLPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB5LPENR_ITCMLPEN RCC_AHB5LPENR_ITCMLPEN_Msk +#define RCC_AHB5LPENR_AXISRAMLPEN_Pos (31U) +#define RCC_AHB5LPENR_AXISRAMLPEN_Msk (0x1UL << RCC_AHB5LPENR_AXISRAMLPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB5LPENR_AXISRAMLPEN RCC_AHB5LPENR_AXISRAMLPEN_Msk + +/******************** Bit definition for RCC_APB1LPENR1 register ************/ +#define RCC_APB1LPENR1_TIM2LPEN_Pos (0U) +#define RCC_APB1LPENR1_TIM2LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM2LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1LPENR1_TIM2LPEN RCC_APB1LPENR1_TIM2LPEN_Msk +#define RCC_APB1LPENR1_TIM3LPEN_Pos (1U) +#define RCC_APB1LPENR1_TIM3LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM3LPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR1_TIM3LPEN RCC_APB1LPENR1_TIM3LPEN_Msk +#define RCC_APB1LPENR1_TIM4LPEN_Pos (2U) +#define RCC_APB1LPENR1_TIM4LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM4LPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB1LPENR1_TIM4LPEN RCC_APB1LPENR1_TIM4LPEN_Msk +#define RCC_APB1LPENR1_TIM5LPEN_Pos (3U) +#define RCC_APB1LPENR1_TIM5LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM5LPEN_Pos) /*!< 0x00000008 */ +#define RCC_APB1LPENR1_TIM5LPEN RCC_APB1LPENR1_TIM5LPEN_Msk +#define RCC_APB1LPENR1_TIM6LPEN_Pos (4U) +#define RCC_APB1LPENR1_TIM6LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM6LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB1LPENR1_TIM6LPEN RCC_APB1LPENR1_TIM6LPEN_Msk +#define RCC_APB1LPENR1_TIM7LPEN_Pos (5U) +#define RCC_APB1LPENR1_TIM7LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM7LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR1_TIM7LPEN RCC_APB1LPENR1_TIM7LPEN_Msk +#define RCC_APB1LPENR1_TIM12LPEN_Pos (6U) +#define RCC_APB1LPENR1_TIM12LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM12LPEN_Pos) /*!< 0x00000040 */ +#define RCC_APB1LPENR1_TIM12LPEN RCC_APB1LPENR1_TIM12LPEN_Msk +#define RCC_APB1LPENR1_TIM13LPEN_Pos (7U) +#define RCC_APB1LPENR1_TIM13LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM13LPEN_Pos) /*!< 0x00000080 */ +#define RCC_APB1LPENR1_TIM13LPEN RCC_APB1LPENR1_TIM13LPEN_Msk +#define RCC_APB1LPENR1_TIM14LPEN_Pos (8U) +#define RCC_APB1LPENR1_TIM14LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM14LPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR1_TIM14LPEN RCC_APB1LPENR1_TIM14LPEN_Msk +#define RCC_APB1LPENR1_LPTIM1LPEN_Pos (9U) +#define RCC_APB1LPENR1_LPTIM1LPEN_Msk (0x1UL << RCC_APB1LPENR1_LPTIM1LPEN_Pos)/*!< 0x00000200 */ +#define RCC_APB1LPENR1_LPTIM1LPEN RCC_APB1LPENR1_LPTIM1LPEN_Msk +#define RCC_APB1LPENR1_WWDGLPEN_Pos (11U) +#define RCC_APB1LPENR1_WWDGLPEN_Msk (0x1UL << RCC_APB1LPENR1_WWDGLPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1LPENR1_WWDGLPEN RCC_APB1LPENR1_WWDGLPEN_Msk +#define RCC_APB1LPENR1_SPI2LPEN_Pos (14U) +#define RCC_APB1LPENR1_SPI2LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI2LPEN_Pos) /*!< 0x00004000 */ +#define RCC_APB1LPENR1_SPI2LPEN RCC_APB1LPENR1_SPI2LPEN_Msk +#define RCC_APB1LPENR1_SPI3LPEN_Pos (15U) +#define RCC_APB1LPENR1_SPI3LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI3LPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB1LPENR1_SPI3LPEN RCC_APB1LPENR1_SPI3LPEN_Msk +#define RCC_APB1LPENR1_SPDIFRXLPEN_Pos (16U) +#define RCC_APB1LPENR1_SPDIFRXLPEN_Msk (0x1UL << RCC_APB1LPENR1_SPDIFRXLPEN_Pos)/*!< 0x00010000 */ +#define RCC_APB1LPENR1_SPDIFRXLPEN RCC_APB1LPENR1_SPDIFRXLPEN_Msk +#define RCC_APB1LPENR1_USART2LPEN_Pos (17U) +#define RCC_APB1LPENR1_USART2LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART2LPEN_Pos)/*!< 0x00020000 */ +#define RCC_APB1LPENR1_USART2LPEN RCC_APB1LPENR1_USART2LPEN_Msk +#define RCC_APB1LPENR1_USART3LPEN_Pos (18U) +#define RCC_APB1LPENR1_USART3LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART3LPEN_Pos)/*!< 0x00040000 */ +#define RCC_APB1LPENR1_USART3LPEN RCC_APB1LPENR1_USART3LPEN_Msk +#define RCC_APB1LPENR1_UART4LPEN_Pos (19U) +#define RCC_APB1LPENR1_UART4LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART4LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB1LPENR1_UART4LPEN RCC_APB1LPENR1_UART4LPEN_Msk +#define RCC_APB1LPENR1_UART5LPEN_Pos (20U) +#define RCC_APB1LPENR1_UART5LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB1LPENR1_UART5LPEN RCC_APB1LPENR1_UART5LPEN_Msk +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos (21U) +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1LPENR1_I2C1_I3C1LPEN RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk +#define RCC_APB1LPENR1_I2C2LPEN_Pos (22U) +#define RCC_APB1LPENR1_I2C2LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C2LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB1LPENR1_I2C2LPEN RCC_APB1LPENR1_I2C2LPEN_Msk +#define RCC_APB1LPENR1_I2C3LPEN_Pos (23U) +#define RCC_APB1LPENR1_I2C3LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C3LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1LPENR1_I2C3LPEN RCC_APB1LPENR1_I2C3LPEN_Msk +#define RCC_APB1LPENR1_CECLPEN_Pos (27U) +#define RCC_APB1LPENR1_CECLPEN_Msk (0x1UL << RCC_APB1LPENR1_CECLPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR1_CECLPEN RCC_APB1LPENR1_CECLPEN_Msk +#define RCC_APB1LPENR1_UART7LPEN_Pos (30U) +#define RCC_APB1LPENR1_UART7LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART7LPEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1LPENR1_UART7LPEN RCC_APB1LPENR1_UART7LPEN_Msk +#define RCC_APB1LPENR1_UART8LPEN_Pos (31U) +#define RCC_APB1LPENR1_UART8LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART8LPEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1LPENR1_UART8LPEN RCC_APB1LPENR1_UART8LPEN_Msk + +/******************** Bit definition for RCC_PB1LPENR2 register ************/ +#define RCC_APB1LPENR2_CRSLPEN_Pos (1U) +#define RCC_APB1LPENR2_CRSLPEN_Msk (0x1UL << RCC_APB1LPENR2_CRSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR2_CRSLPEN RCC_APB1LPENR2_CRSLPEN_Msk +#define RCC_APB1LPENR2_MDIOSLPEN_Pos (5U) +#define RCC_APB1LPENR2_MDIOSLPEN_Msk (0x1UL << RCC_APB1LPENR2_MDIOSLPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR2_MDIOSLPEN RCC_APB1LPENR2_MDIOSLPEN_Msk +#define RCC_APB1LPENR2_FDCANLPEN_Pos (8U) +#define RCC_APB1LPENR2_FDCANLPEN_Msk (0x1UL << RCC_APB1LPENR2_FDCANLPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR2_FDCANLPEN RCC_APB1LPENR2_FDCANLPEN_Msk +#define RCC_APB1LPENR2_UCPD1LPEN_Pos (27U) +#define RCC_APB1LPENR2_UCPD1LPEN_Msk (0x1UL << RCC_APB1LPENR2_UCPD1LPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR2_UCPD1LPEN RCC_APB1LPENR2_UCPD1LPEN_Msk + +/******************** Bit definition for RCC_APB2LPENR register *************/ +#define RCC_APB2LPENR_TIM1LPEN_Pos (0U) +#define RCC_APB2LPENR_TIM1LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2LPENR_TIM1LPEN RCC_APB2LPENR_TIM1LPEN_Msk +#define RCC_APB2LPENR_USART1LPEN_Pos (4U) +#define RCC_APB2LPENR_USART1LPEN_Msk (0x1UL << RCC_APB2LPENR_USART1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2LPENR_USART1LPEN RCC_APB2LPENR_USART1LPEN_Msk +#define RCC_APB2LPENR_SPI1LPEN_Pos (12U) +#define RCC_APB2LPENR_SPI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI1LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2LPENR_SPI1LPEN RCC_APB2LPENR_SPI1LPEN_Msk +#define RCC_APB2LPENR_SPI4LPEN_Pos (13U) +#define RCC_APB2LPENR_SPI4LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI4LPEN_Pos) /*!< 0x00002000 */ +#define RCC_APB2LPENR_SPI4LPEN RCC_APB2LPENR_SPI4LPEN_Msk +#define RCC_APB2LPENR_TIM15LPEN_Pos (16U) +#define RCC_APB2LPENR_TIM15LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM15LPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB2LPENR_TIM15LPEN RCC_APB2LPENR_TIM15LPEN_Msk +#define RCC_APB2LPENR_TIM16LPEN_Pos (17U) +#define RCC_APB2LPENR_TIM16LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM16LPEN_Pos) /*!< 0x00020000 */ +#define RCC_APB2LPENR_TIM16LPEN RCC_APB2LPENR_TIM16LPEN_Msk +#define RCC_APB2LPENR_TIM17LPEN_Pos (18U) +#define RCC_APB2LPENR_TIM17LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM17LPEN_Pos) /*!< 0x00040000 */ +#define RCC_APB2LPENR_TIM17LPEN RCC_APB2LPENR_TIM17LPEN_Msk +#define RCC_APB2LPENR_TIM9LPEN_Pos (19U) +#define RCC_APB2LPENR_TIM9LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM9LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB2LPENR_TIM9LPEN RCC_APB2LPENR_TIM9LPEN_Msk +#define RCC_APB2LPENR_SPI5LPEN_Pos (20U) +#define RCC_APB2LPENR_SPI5LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB2LPENR_SPI5LPEN RCC_APB2LPENR_SPI5LPEN_Msk +#define RCC_APB2LPENR_SAI1LPEN_Pos (22U) +#define RCC_APB2LPENR_SAI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI1LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB2LPENR_SAI1LPEN RCC_APB2LPENR_SAI1LPEN_Msk +#define RCC_APB2LPENR_SAI2LPEN_Pos (23U) +#define RCC_APB2LPENR_SAI2LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI2LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB2LPENR_SAI2LPEN RCC_APB2LPENR_SAI2LPEN_Msk + +/******************** Bit definition for RCC_APB4LPENR register *************/ +#define RCC_APB4LPENR_SBSLPEN_Pos (1U) +#define RCC_APB4LPENR_SBSLPEN_Msk (0x1UL << RCC_APB4LPENR_SBSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4LPENR_SBSLPEN RCC_APB4LPENR_SBSLPEN_Msk +#define RCC_APB4LPENR_LPUART1LPEN_Pos (3U) +#define RCC_APB4LPENR_LPUART1LPEN_Msk (0x1UL << RCC_APB4LPENR_LPUART1LPEN_Pos)/*!< 0x00000008 */ +#define RCC_APB4LPENR_LPUART1LPEN RCC_APB4LPENR_LPUART1LPEN_Msk +#define RCC_APB4LPENR_SPI6LPEN_Pos (5U) +#define RCC_APB4LPENR_SPI6LPEN_Msk (0x1UL << RCC_APB4LPENR_SPI6LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB4LPENR_SPI6LPEN RCC_APB4LPENR_SPI6LPEN_Msk +#define RCC_APB4LPENR_LPTIM2LPEN_Pos (9U) +#define RCC_APB4LPENR_LPTIM2LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_APB4LPENR_LPTIM2LPEN RCC_APB4LPENR_LPTIM2LPEN_Msk +#define RCC_APB4LPENR_LPTIM3LPEN_Pos (10U) +#define RCC_APB4LPENR_LPTIM3LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM3LPEN_Pos) /*!< 0x00000400 */ +#define RCC_APB4LPENR_LPTIM3LPEN RCC_APB4LPENR_LPTIM3LPEN_Msk +#define RCC_APB4LPENR_LPTIM4LPEN_Pos (11U) +#define RCC_APB4LPENR_LPTIM4LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM4LPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB4LPENR_LPTIM4LPEN RCC_APB4LPENR_LPTIM4LPEN_Msk +#define RCC_APB4LPENR_LPTIM5LPEN_Pos (12U) +#define RCC_APB4LPENR_LPTIM5LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM5LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB4LPENR_LPTIM5LPEN RCC_APB4LPENR_LPTIM5LPEN_Msk +#define RCC_APB4LPENR_VREFLPEN_Pos (15U) +#define RCC_APB4LPENR_VREFLPEN_Msk (0x1UL << RCC_APB4LPENR_VREFLPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4LPENR_VREFLPEN RCC_APB4LPENR_VREFLPEN_Msk +#define RCC_APB4LPENR_RTCAPBLPEN_Pos (16U) +#define RCC_APB4LPENR_RTCAPBLPEN_Msk (0x1UL << RCC_APB4LPENR_RTCAPBLPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4LPENR_RTCAPBLPEN RCC_APB4LPENR_RTCAPBLPEN_Msk +#define RCC_APB4LPENR_DTSLPEN_Pos (26U) +#define RCC_APB4LPENR_DTSLPEN_Msk (0x1UL << RCC_APB4LPENR_DTSLPEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4LPENR_DTSLPEN RCC_APB4LPENR_DTSLPEN_Msk + +/******************** Bit definition for RCC_APB5LPENR register *************/ +#define RCC_APB5LPENR_DCMIPPLPEN_Pos (2U) +#define RCC_APB5LPENR_DCMIPPLPEN_Msk (0x1UL << RCC_APB5LPENR_DCMIPPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5LPENR_DCMIPPLPEN RCC_APB5LPENR_DCMIPPLPEN_Msk +#define RCC_APB5LPENR_GFXTIMLPEN_Pos (4U) +#define RCC_APB5LPENR_GFXTIMLPEN_Msk (0x1UL << RCC_APB5LPENR_GFXTIMLPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5LPENR_GFXTIMLPEN RCC_APB5LPENR_GFXTIMLPEN_Msk + + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RNG_CR register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk +#define RNG_CR_ARDIS_Pos (7U) +#define RNG_CR_ARDIS_Msk (0x1UL << RNG_CR_ARDIS_Pos) +#define RNG_CR_ARDIS RNG_CR_ARDIS_Msk +#define RNG_CR_RNG_CONFIG3_Pos (8U) +#define RNG_CR_RNG_CONFIG3_Msk (0xFUL << RNG_CR_RNG_CONFIG3_Pos) +#define RNG_CR_RNG_CONFIG3 RNG_CR_RNG_CONFIG3_Msk +#define RNG_CR_NISTC_Pos (12U) +#define RNG_CR_NISTC_Msk (0x1UL << RNG_CR_NISTC_Pos) +#define RNG_CR_NISTC RNG_CR_NISTC_Msk +#define RNG_CR_RNG_CONFIG2_Pos (13U) +#define RNG_CR_RNG_CONFIG2_Msk (0x7UL << RNG_CR_RNG_CONFIG2_Pos) +#define RNG_CR_RNG_CONFIG2 RNG_CR_RNG_CONFIG2_Msk +#define RNG_CR_CLKDIV_Pos (16U) +#define RNG_CR_CLKDIV_Msk (0xFUL << RNG_CR_CLKDIV_Pos) +#define RNG_CR_CLKDIV RNG_CR_CLKDIV_Msk +#define RNG_CR_CLKDIV_0 (0x1UL << RNG_CR_CLKDIV_Pos) /*!< 0x00010000 */ +#define RNG_CR_CLKDIV_1 (0x2UL << RNG_CR_CLKDIV_Pos) /*!< 0x00020000 */ +#define RNG_CR_CLKDIV_2 (0x4UL << RNG_CR_CLKDIV_Pos) /*!< 0x00040000 */ +#define RNG_CR_CLKDIV_3 (0x8UL << RNG_CR_CLKDIV_Pos) /*!< 0x00080000 */ +#define RNG_CR_RNG_CONFIG1_Pos (20U) +#define RNG_CR_RNG_CONFIG1_Msk (0x3FUL << RNG_CR_RNG_CONFIG1_Pos) +#define RNG_CR_RNG_CONFIG1 RNG_CR_RNG_CONFIG1_Msk +#define RNG_CR_CONDRST_Pos (30U) +#define RNG_CR_CONDRST_Msk (0x1UL << RNG_CR_CONDRST_Pos) +#define RNG_CR_CONDRST RNG_CR_CONDRST_Msk +#define RNG_CR_CONFIGLOCK_Pos (31U) +#define RNG_CR_CONFIGLOCK_Msk (0x1UL << RNG_CR_CONFIGLOCK_Pos) +#define RNG_CR_CONFIGLOCK RNG_CR_CONFIGLOCK_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************** Bits definition for RNG_HTCR register *******************/ +#define RNG_HTCR_HTCFG_Pos (0U) +#define RNG_HTCR_HTCFG_Msk (0xFFFFFFFFUL << RNG_HTCR_HTCFG_Pos) /*!< 0xFFFFFFFF */ +#define RNG_HTCR_HTCFG RNG_HTCR_HTCFG_Msk + + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk +#define RTC_TR_SU_0 (0x1UL << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2UL << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4UL << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8UL << RTC_TR_SU_Pos) /*!< 0x00000008 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk +#define RTC_TR_ST_0 (0x1UL << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2UL << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4UL << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk +#define RTC_TR_MNU_0 (0x1UL << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2UL << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4UL << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8UL << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk +#define RTC_TR_MNT_0 (0x1UL << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2UL << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4UL << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk +#define RTC_TR_HU_0 (0x1UL << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2UL << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4UL << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8UL << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk +#define RTC_TR_HT_0 (0x1UL << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2UL << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk +#define RTC_DR_DU_0 (0x1UL << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2UL << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4UL << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8UL << RTC_DR_DU_Pos) /*!< 0x00000008 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk +#define RTC_DR_DT_0 (0x1UL << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2UL << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk +#define RTC_DR_MU_0 (0x1UL << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2UL << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4UL << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8UL << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk +#define RTC_DR_WDU_0 (0x1UL << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2UL << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4UL << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk +#define RTC_DR_YU_0 (0x1UL << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2UL << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4UL << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8UL << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk +#define RTC_DR_YT_0 (0x1UL << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2UL << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4UL << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8UL << RTC_DR_YT_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFFFFFUL << RTC_SSR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk + +/******************** Bits definition for RTC_ICSR register ******************/ +#define RTC_ICSR_WUTWF_Pos (2U) +#define RTC_ICSR_WUTWF_Msk (0x1UL << RTC_ICSR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ICSR_WUTWF RTC_ICSR_WUTWF_Msk +#define RTC_ICSR_SHPF_Pos (3U) +#define RTC_ICSR_SHPF_Msk (0x1UL << RTC_ICSR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ICSR_SHPF RTC_ICSR_SHPF_Msk +#define RTC_ICSR_INITS_Pos (4U) +#define RTC_ICSR_INITS_Msk (0x1UL << RTC_ICSR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ICSR_INITS RTC_ICSR_INITS_Msk +#define RTC_ICSR_RSF_Pos (5U) +#define RTC_ICSR_RSF_Msk (0x1UL << RTC_ICSR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ICSR_RSF RTC_ICSR_RSF_Msk +#define RTC_ICSR_INITF_Pos (6U) +#define RTC_ICSR_INITF_Msk (0x1UL << RTC_ICSR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ICSR_INITF RTC_ICSR_INITF_Msk +#define RTC_ICSR_INIT_Pos (7U) +#define RTC_ICSR_INIT_Msk (0x1UL << RTC_ICSR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ICSR_INIT RTC_ICSR_INIT_Msk +#define RTC_ICSR_BIN_Pos (8U) +#define RTC_ICSR_BIN_Msk (0x3UL << RTC_ICSR_BIN_Pos) /*!< 0x00000300 */ +#define RTC_ICSR_BIN RTC_ICSR_BIN_Msk +#define RTC_ICSR_BIN_0 (0x1UL << RTC_ICSR_BIN_Pos) /*!< 0x00000100 */ +#define RTC_ICSR_BIN_1 (0x2UL << RTC_ICSR_BIN_Pos) /*!< 0x00000200 */ +#define RTC_ICSR_BCDU_Pos (10U) +#define RTC_ICSR_BCDU_Msk (0x7UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001C00 */ +#define RTC_ICSR_BCDU RTC_ICSR_BCDU_Msk +#define RTC_ICSR_BCDU_0 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000400 */ +#define RTC_ICSR_BCDU_1 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000800 */ +#define RTC_ICSR_BCDU_2 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001000 */ +#define RTC_ICSR_RECALPF_Pos (16U) +#define RTC_ICSR_RECALPF_Msk (0x1UL << RTC_ICSR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ICSR_RECALPF RTC_ICSR_RECALPF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk +#define RTC_WUTR_WUTOCLR_Pos (16U) +#define RTC_WUTR_WUTOCLR_Msk (0xFFFFUL << RTC_WUTR_WUTOCLR_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUTOCLR RTC_WUTR_WUTOCLR_Msk + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_SSRUIE_Pos (7U) +#define RTC_CR_SSRUIE_Msk (0x1UL << RTC_CR_SSRUIE_Pos) /*!< 0x00000080 */ +#define RTC_CR_SSRUIE RTC_CR_SSRUIE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*! */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0x3FUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_MASKSS_4 (0x10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMASSR_MASKSS_5 (0x20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMASSR_SSCLR_Pos (31U) +#define RTC_ALRMASSR_SSCLR_Msk (0x1UL << RTC_ALRMASSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMASSR_SSCLR RTC_ALRMASSR_SSCLR_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0x3FUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_MASKSS_4 (0x10UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBSSR_MASKSS_5 (0x20UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBSSR_SSCLR_Pos (31U) +#define RTC_ALRMBSSR_SSCLR_Msk (0x1UL << RTC_ALRMBSSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBSSR_SSCLR RTC_ALRMBSSR_SSCLR_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_SSRUF_Pos (6U) +#define RTC_SR_SSRUF_Msk (0x1UL << RTC_SR_SSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SR_SSRUF RTC_SR_SSRUF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_SSRUMF_Pos (6U) +#define RTC_MISR_SSRUMF_Msk (0x1UL << RTC_MISR_SSRUMF_Pos) /*!< 0x00000040 */ +#define RTC_MISR_SSRUMF RTC_MISR_SSRUMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CSSRUF_Pos (6U) +#define RTC_SCR_CSSRUF_Msk (0x1UL << RTC_SCR_CSSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SCR_CSSRUF RTC_SCR_CSSRUF_Msk + +/******************** Bits definition for RTC_ALRABINR register ******************/ +#define RTC_ALRABINR_SS_Pos (0U) +#define RTC_ALRABINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRABINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRABINR_SS RTC_ALRABINR_SS_Msk + +/******************** Bits definition for RTC_ALRBBINR register ******************/ +#define RTC_ALRBBINR_SS_Pos (0U) +#define RTC_ALRBBINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRBBINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRBBINR_SS RTC_ALRBBINR_SS_Msk + + +/******************************************************************************/ +/* */ +/* Serial Audio Interface */ +/* */ +/******************************************************************************/ +/******************** Bit definition for SAI_GCR register *******************/ +#define SAI_GCR_SYNCIN_Pos (0U) +#define SAI_GCR_SYNCIN_Msk (0x3UL << SAI_GCR_SYNCIN_Pos) /*!< 0x00000003 */ +#define SAI_GCR_SYNCIN SAI_GCR_SYNCIN_Msk /*! /*!< ARM Cortex-M7 processor and core peripherals */ +#include "system_stm32h7rsxx.h" /*!< STM32H7RSxx System */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_peripherals + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + uint32_t RESERVED10[4];/*!< Reserved, 0x0B8 - 0x0BC */ + __IO uint32_t OR; /*!< ADC option register, Address offset: 0xC8 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: 0x300 + 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x300 + 0x04 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: 0x300 + 0x08 */ + __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: 0x300 + 0x0C */ +} ADC_Common_TypeDef; + +/** + * @brief AXIM ASIB + */ +typedef struct +{ + uint32_t RESERVED1[9]; /*!< Reserved, Address offset: 0x00-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM ASIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[54]; /*!< Reserved, Address offset: 0x28-0xFC */ + __IO uint32_t READQOS; /*!< AXIM ASIB read_qos register Address offset: 0x100 */ + __IO uint32_t WRITEQOS; /*!< AXIM ASIB write_qos register Address offset: 0x104 */ + __IO uint32_t FNMOD; /*!< AXIM ASIB fn_mod register Address offset: 0x108 */ +} AXIM_ASIB_TypeDef; + +typedef struct +{ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x00-0x04 */ + __IO uint32_t FNMODBMISS; /*!< AXIM AMIB fn_mod_bm_iss register Address offset: 0x08 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x0C-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM AMIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[1]; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t FNMODLB; /*!< AXIM AMIB fn_mod_lb register Address offset: 0x2C */ + uint32_t RESERVED5[54]; /*!< Reserved, Address offset: 0x30-0x104 */ + __IO uint32_t FNMOD; /*!< AXIM AMIB fn_mod register Address offset: 0x108 */ +} AXIM_AMIB_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +} CEC_TypeDef; + +/** + * @brief CORDIC + */ +typedef struct +{ + __IO uint32_t CSR; /*!< CORDIC Control and Status register, Address offset: 0x00 */ + __IO uint32_t WDATA; /*!< CORDIC argument register, Address offset: 0x04 */ + __IO uint32_t RDATA; /*!< CORDIC result register, Address offset: 0x08 */ +} CORDIC_TypeDef; + +/** + * @brief GFXTIM + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXTIM configuration register, Address offset: 0x00 */ + __IO uint32_t CGCR; /*!< GFXTIM clock generator configuration register, Address offset: 0x04 */ + __IO uint32_t TCR; /*!< GFXTIM timers configuration register, Address offset: 0x08 */ + __IO uint32_t TDR; /*!< GFXTIM timers disable register, Address offset: 0x0C */ + __IO uint32_t EVCR; /*!< GFXTIM events control register, Address offset: 0x10 */ + __IO uint32_t EVSR; /*!< GFXTIM events selection register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t WDGTCR; /*!< GFXTIM watchdog timer configuration register, Address offset: 0x20 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t ISR; /*!< GFXTIM interrupt status register, Address offset: 0x30 */ + __IO uint32_t ICR; /*!< GFXTIM interrupt clear register, Address offset: 0x34 */ + __IO uint32_t IER; /*!< GFXTIM interrupt enable register, Address offset: 0x38 */ + __IO uint32_t TSR; /*!< GFXTIM timers status register, Address offset: 0x3C */ + __IO uint32_t LCCRR; /*!< GFXTIM line clock counter reload register, Address offset: 0x40 */ + __IO uint32_t FCCRR; /*!< GFXTIM frame clock counter reload register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x48-0x4C */ + __IO uint32_t ATR; /*!< GFXTIM absolute time register, Address offset: 0x50 */ + __IO uint32_t AFCR; /*!< GFXTIM absolute frame counter register, Address offset: 0x54 */ + __IO uint32_t ALCR; /*!< GFXTIM absolute line counter register, Address offset: 0x58 */ + uint32_t RESERVED4[1]; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t AFCC1R; /*!< GFXTIM absolute frame counter compare 1 register, Address offset: 0x60 */ + uint32_t RESERVED5[3]; /*!< Reserved, Address offset: 0x64-0X6C */ + __IO uint32_t ALCC1R; /*!< GFXTIM absolute line counter compare 1 register, Address offset: 0x70 */ + __IO uint32_t ALCC2R; /*!< GFXTIM absolute line counter compare 2 register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, Address offset: 0x78-0X7C */ + __IO uint32_t RFC1R; /*!< GFXTIM relative frame counter 1 register, Address offset: 0x80 */ + __IO uint32_t RFC1RR; /*!< GFXTIM relative frame counter 1 reload register, Address offset: 0x84 */ + __IO uint32_t RFC2R; /*!< GFXTIM relative frame counter 2 register, Address offset: 0x88 */ + __IO uint32_t RFC2RR; /*!< GFXTIM relative frame counter 2 reload register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x90-0X9C */ + __IO uint32_t WDGCR; /*!< GFXTIM watchdog counter register, Address offset: 0xA0 */ + __IO uint32_t WDGRR; /*!< GFXTIM watchdog reload register, Address offset: 0xA4 */ + __IO uint32_t WDGPAR; /*!< GFXTIM watchdog pre-alarm register, Address offset: 0xA8 */ + uint32_t RESERVED8[209]; /*!< Reserved, Address offset: 0xAC-0X3EC */ + __IO uint32_t HWCFGR; /*!< GFXTIM HW configuration register, Address offset: 0x3F0 */ + __IO uint32_t VERR; /*!< GFXTIM version register, Address offset: 0x3F4 */ + __IO uint32_t IPIDR; /*!< GFXTIM identification register, Address offset: 0x3F8 */ + __IO uint32_t SIDR; /*!< GFXTIM size identification register, Address offset: 0x3FC */ +} GFXTIM_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[5]; /*!< Reserved, Address offset: 0x08-0x18 */ + __IO uint32_t AHB5FZR; /*!< Debug MCU AHB5FZR freeze register, Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t AHB1FZR; /*!< Debug MCU AHB1FZR freeze register, Address offset: 0x24 */ + uint32_t RESERVED3[5]; /*!< Reserved, Address offset: 0x28-0x38 */ + __IO uint32_t APB1FZR; /*!< Debug MCU APB1FZR freeze register, Address offset: 0x3C */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x40-0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU APB2FZR freeze register, Address offset: 0x4C */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t APB4FZR; /*!< Debug MCU APB4FZR freeze register, Address offset: 0x54 */ + uint32_t RESERVED6[41]; /*!< Reserved, Address offset: 0x58-0xF8 */ + __IO uint32_t SR; /*!< Debug MCU status register, Address offset: 0xFC */ + __IO uint32_t DBG_AUTH_HOST; /*!< Debug MCU Authentication Host register, Address offset: 0x100 */ + __IO uint32_t DBG_AUTH_DEV; /*!< Debug MCU Authentication Device register, Address offset: 0x104 */ + __IO uint32_t DBG_AUTH_ACK; /*!< Debug MCU Authentication Ack register, Address offset: 0x108 */ + uint32_t RESERVED7[945]; /*!< Reserved, Address offset: 0x10C-0xFCC */ + __IO uint32_t PIDR4; /*!< Debug MCU peripheral identity register 4, Address offset: 0xFD0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xFD4-0xFDC */ + __IO uint32_t PIDR0; /*!< Debug MCU peripheral identity register 0, Address offset: 0xFE0 */ + __IO uint32_t PIDR1; /*!< Debug MCU peripheral identity register 1, Address offset: 0xFE4 */ + __IO uint32_t PIDR2; /*!< Debug MCU peripheral identity register 2, Address offset: 0xFE8 */ + __IO uint32_t PIDR3; /*!< Debug MCU peripheral identity register 3, Address offset: 0xFEC */ + __IO uint32_t CIDR0; /*!< Debug MCU component identity register 0, Address offset: 0xFF0 */ + __IO uint32_t CIDR1; /*!< Debug MCU component identity register 1, Address offset: 0xFF4 */ + __IO uint32_t CIDR2; /*!< Debug MCU component identity register 2, Address offset: 0xFF8 */ + __IO uint32_t CIDR3; /*!< Debug MCU component identity register 3, Address offset: 0xFFC */ +} DBGMCU_TypeDef; + +/** + * @brief DCMIPP + */ +typedef struct +{ + __IO uint32_t IPGR1; /*!< IP-Plug global register 1 Address offset: 0x00 */ + __IO uint32_t IPGR2; /*!< IP-Plug global register 2 Address offset: 0x04 */ + __IO uint32_t IPGR3; /*!< IP-Plug global register 3 Address offset: 0x08 */ + uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x0C-0x18 */ + __IO uint32_t IPGR8; /*!< IP-Plug global register 8 Address offset: 0x1C */ + __IO uint32_t IPC1R1; /*!< IP-Plug client 1 register 1 Address offset: 0x20 */ + __IO uint32_t IPC1R2; /*!< IP-Plug client 1 register 2 Address offset: 0x24 */ + __IO uint32_t IPC1R3; /*!< IP-Plug client 1 register 3 Address offset: 0x28 */ + __IO uint32_t RESERVED2[54]; /*!< Reserved, Address offset: 0x2C-0x100 */ + __IO uint32_t PRCR; /*!< Parallel interface control register Address offset: 0x104 */ + __IO uint32_t PRESCR; /*!< Parallel interface embedded sync code register Address offset: 0x108 */ + __IO uint32_t PRESUR; /*!< Parallel interface embedded sync unmask register Address offset: 0x10C */ + __IO uint32_t RESERVED3[57]; /*!< Reserved, Address offset: 0x110-0x1F0 */ + __IO uint32_t PRIER; /*!< Parallel interface interrupt enable register Address offset: 0x1F4 */ + __IO uint32_t PRSR; /*!< Parallel interface status register Address offset: 0x1F8 */ + __IO uint32_t PRFCR; /*!< Parallel interface interrupt clear register Address offset: 0x1FC */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x200 */ + __IO uint32_t CMCR; /*!< Common configuration register Address offset: 0x204 */ + __IO uint32_t CMFRCR; /*!< Common frame counter register Address offset: 0x208 */ + __IO uint32_t RESERVED5[121]; /*!< Reserved, Address offset: 0x20C-0x3EC */ + __IO uint32_t CMIER; /*!< Common interrupt enable register Address offset: 0x3F0 */ + __IO uint32_t CMSR1; /*!< Common status register 1 Address offset: 0x3F4 */ + __IO uint32_t CMSR2; /*!< Common status register 2 Address offset: 0x3F8 */ + __IO uint32_t CMFCR; /*!< Common interrupt clear register Address offset: 0x3FC */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x400 */ + __IO uint32_t P0FSCR; /*!< Pipe0 flow selection configuration register Address offset: 0x404 */ + __IO uint32_t RESERVED7[62]; /*!< Reserved, Address offset: 0x408-0x4FC */ + __IO uint32_t P0FCTCR; /*!< Pipe0 flow control configuration register Address offset: 0x500 */ + __IO uint32_t P0SCSTR; /*!< Pipe0 stat/crop start register Address offset: 0x504 */ + __IO uint32_t P0SCSZR; /*!< Pipe0 stat/crop size register Address offset: 0x508 */ + __IO uint32_t RESERVED8[41]; /*!< Reserved, Address offset: 0x50C-0x5AC */ + __IO uint32_t P0DCCNTR; /*!< Pipe0 dump counter register Address offset: 0x5B0 */ + __IO uint32_t P0DCLMTR; /*!< Pipe0 dump limit register Address offset: 0x5B4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x5B8-0x5BC */ + __IO uint32_t P0PPCR; /*!< Pipe0 pixel packer configuration register Address offset: 0x5C0 */ + __IO uint32_t P0PPM0AR1; /*!< Pipe0 pixel packer memory0 address register 1 Address offset: 0x5C4 */ + __IO uint32_t P0PPM0AR2; /*!< Pipe0 pixel packer memory0 address register 2 Address offset: 0x5C8 */ + __IO uint32_t RESERVED10[10]; /*!< Reserved, Address offset: 0x5CC-0x5F0 */ + __IO uint32_t P0IER; /*!< Pipe0 interrupt enable register Address offset: 0x5F4 */ + __IO uint32_t P0SR; /*!< Pipe0 status register Address offset: 0x5F8 */ + __IO uint32_t P0FCR; /*!< Pipe0 interrupt clear register Address offset: 0x5FC */ + __IO uint32_t RESERVED11[64]; /*!< Reserved, Address offset: 0x600-0x6FC */ + __IO uint32_t P0CFCTCR; /*!< Pipe0 current flow control configuration register Address offset: 0x700 */ + __IO uint32_t P0CSCSTR; /*!< Pipe0 current stat/crop start register Address offset: 0x704 */ + __IO uint32_t P0CSCSZR; /*!< Pipe0 current stat/crop size register Address offset: 0x708 */ + __IO uint32_t RESERVED12[45]; /*!< Reserved, Address offset: 0x70C-0x7BC */ + __IO uint32_t P0CPPCR; /*!< Pipe0 current pixel packer configuration register Address offset: 0x700 */ + __IO uint32_t P0CPPM0AR1; /*!< Pipe0 current pixel packer memory0 address register 1 Address offset: 0x7C4 */ + __IO uint32_t P0CPPM0AR2; /*!< Pipe0 current pixel packer memory0 address register 2 Address offset: 0x7C8 */ +} DCMIPP_TypeDef; + +/** + * @ brief Delay Block + */ +typedef struct +{ + __IO uint32_t CR; /*!< Delay Block Control Register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< Delay Block Configuration Register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved 1, Address offset: 0x00 */ + __IO uint32_t PRIVCFGR; /*!< DMA privileged configuration register, Address offset: 0x04 */ + __IO uint32_t RCFGLOCKR; /*!< DMA configuration lock register, Address offset: 0x08 */ + __IO uint32_t MISR; /*!< DMA masked interrupt status register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CLBAR; /*!< DMA channel x linked-list base address register, Address offset: 0x50 + (x * 0x80) */ + uint32_t RESERVED1[2]; /*!< Reserved 1, Address offset: 0x54 -- 0x58 */ + __IO uint32_t CFCR; /*!< DMA channel x flag clear register, Address offset: 0x5C + (x * 0x80) */ + __IO uint32_t CSR; /*!< DMA channel x flag status register, Address offset: 0x60 + (x * 0x80) */ + __IO uint32_t CCR; /*!< DMA channel x control register, Address offset: 0x64 + (x * 0x80) */ + uint32_t RESERVED2[10]; /*!< Reserved 2, Address offset: 0x68 -- 0x8C */ + __IO uint32_t CTR1; /*!< DMA channel x transfer register 1, Address offset: 0x90 + (x * 0x80) */ + __IO uint32_t CTR2; /*!< DMA channel x transfer register 2, Address offset: 0x94 + (x * 0x80) */ + __IO uint32_t CBR1; /*!< DMA channel x block register 1, Address offset: 0x98 + (x * 0x80) */ + __IO uint32_t CSAR; /*!< DMA channel x source address register, Address offset: 0x9C + (x * 0x80) */ + __IO uint32_t CDAR; /*!< DMA channel x destination address register, Address offset: 0xA0 + (x * 0x80) */ + __IO uint32_t CTR3; /*!< DMA channel x transfer register 3, Address offset: 0xA4 + (x * 0x80) */ + __IO uint32_t CBR2; /*!< DMA channel x block register 2, Address offset: 0xA8 + (x * 0x80) */ + uint32_t RESERVED3[8]; /*!< Reserved 3, Address offset: 0xAC -- 0xC8 */ + __IO uint32_t CLLR; /*!< DMA channel x linked-list address register, Address offset: 0xCC + (x * 0x80) */ +} DMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ +} DMA2D_TypeDef; + +/** + * @brief DTS + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< DTS configuration register, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t T0VALR1; /*!< DTS T0 Value register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x0C */ + __IO uint32_t RAMPVALR; /*!< DTS Ramp value register, Address offset: 0x10 */ + __IO uint32_t ITR1; /*!< DTS Interrupt threshold register, Address offset: 0x14 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t DR; /*!< DTS data register, Address offset: 0x1C */ + __IO uint32_t SR; /*!< DTS status register Address offset: 0x20 */ + __IO uint32_t ITENR; /*!< DTS Interrupt enable register, Address offset: 0x24 */ + __IO uint32_t ICIFR; /*!< DTS Clear Interrupt flag register, Address offset: 0x28 */ + __IO uint32_t OR; /*!< DTS option register 1, Address offset: 0x2C */ +} DTS_TypeDef; + +/** + * @brief Ethernet MAC + */ +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACECR; + __IO uint32_t MACPFR; + __IO uint32_t MACWTR; + __IO uint32_t MACHT0R; + __IO uint32_t MACHT1R; + uint32_t RESERVED1[14]; + __IO uint32_t MACVTR; + uint32_t RESERVED2; + __IO uint32_t MACVHTR; + uint32_t RESERVED3; + __IO uint32_t MACVIR; + __IO uint32_t MACIVIR; + uint32_t RESERVED4[2]; + __IO uint32_t MACTFCR; + uint32_t RESERVED5[7]; + __IO uint32_t MACRFCR; + uint32_t RESERVED6[7]; + __IO uint32_t MACISR; + __IO uint32_t MACIER; + __IO uint32_t MACRXTXSR; + uint32_t RESERVED7; + __IO uint32_t MACPCSR; + __IO uint32_t MACRWKPFR; + uint32_t RESERVED8[2]; + __IO uint32_t MACLCSR; + __IO uint32_t MACLTCR; + __IO uint32_t MACLETR; + __IO uint32_t MAC1USTCR; + uint32_t RESERVED9[12]; + __IO uint32_t MACVR; + __IO uint32_t MACDR; + uint32_t RESERVED10; + __IO uint32_t MACHWF0R; + __IO uint32_t MACHWF1R; + __IO uint32_t MACHWF2R; + uint32_t RESERVED11[54]; + __IO uint32_t MACMDIOAR; + __IO uint32_t MACMDIODR; + uint32_t RESERVED12[2]; + __IO uint32_t MACARPAR; + uint32_t RESERVED13[59]; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; + uint32_t RESERVED14[248]; + __IO uint32_t MMCCR; + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; + uint32_t RESERVED15[14]; + __IO uint32_t MMCTSCGPR; + __IO uint32_t MMCTMCGPR; + uint32_t RESERVED16[5]; + __IO uint32_t MMCTPCGR; + uint32_t RESERVED17[10]; + __IO uint32_t MMCRCRCEPR; + __IO uint32_t MMCRAEPR; + uint32_t RESERVED18[10]; + __IO uint32_t MMCRUPGR; + uint32_t RESERVED19[9]; + __IO uint32_t MMCTLPIMSTR; + __IO uint32_t MMCTLPITCR; + __IO uint32_t MMCRLPIMSTR; + __IO uint32_t MMCRLPITCR; + uint32_t RESERVED20[65]; + __IO uint32_t MACL3L4C0R; + __IO uint32_t MACL4A0R; + uint32_t RESERVED21[2]; + __IO uint32_t MACL3A0R0R; + __IO uint32_t MACL3A1R0R; + __IO uint32_t MACL3A2R0R; + __IO uint32_t MACL3A3R0R; + uint32_t RESERVED22[4]; + __IO uint32_t MACL3L4C1R; + __IO uint32_t MACL4A1R; + uint32_t RESERVED23[2]; + __IO uint32_t MACL3A0R1R; + __IO uint32_t MACL3A1R1R; + __IO uint32_t MACL3A2R1R; + __IO uint32_t MACL3A3R1R; + uint32_t RESERVED24[108]; + __IO uint32_t MACTSCR; + __IO uint32_t MACSSIR; + __IO uint32_t MACSTSR; + __IO uint32_t MACSTNR; + __IO uint32_t MACSTSUR; + __IO uint32_t MACSTNUR; + __IO uint32_t MACTSAR; + uint32_t RESERVED25; + __IO uint32_t MACTSSR; + uint32_t RESERVED26[3]; + __IO uint32_t MACTTSSNR; + __IO uint32_t MACTTSSSR; + uint32_t RESERVED27[2]; + __IO uint32_t MACACR; + uint32_t RESERVED28; + __IO uint32_t MACATSNR; + __IO uint32_t MACATSSR; + __IO uint32_t MACTSIACR; + __IO uint32_t MACTSEACR; + __IO uint32_t MACTSICNR; + __IO uint32_t MACTSECNR; + uint32_t RESERVED29[4]; + __IO uint32_t MACPPSCR; + uint32_t RESERVED30[3]; + __IO uint32_t MACPPSTTSR; + __IO uint32_t MACPPSTTNR; + __IO uint32_t MACPPSIR; + __IO uint32_t MACPPSWR; + uint32_t RESERVED31[12]; + __IO uint32_t MACPOCR; + __IO uint32_t MACSPI0R; + __IO uint32_t MACSPI1R; + __IO uint32_t MACSPI2R; + __IO uint32_t MACLMIR; + uint32_t RESERVED32[11]; + __IO uint32_t MTLOMR; + uint32_t RESERVED33[7]; + __IO uint32_t MTLISR; + uint32_t RESERVED34[55]; + __IO uint32_t MTLTQOMR; + __IO uint32_t MTLTQUR; + __IO uint32_t MTLTQDR; + uint32_t RESERVED35[8]; + __IO uint32_t MTLQICSR; + __IO uint32_t MTLRQOMR; + __IO uint32_t MTLRQMPOCR; + __IO uint32_t MTLRQDR; + uint32_t RESERVED36[177]; + __IO uint32_t DMAMR; + __IO uint32_t DMASBMR; + __IO uint32_t DMAISR; + __IO uint32_t DMADSR; + uint32_t RESERVED37[60]; + __IO uint32_t DMACCR; + __IO uint32_t DMACTCR; + __IO uint32_t DMACRCR; + uint32_t RESERVED38[2]; + __IO uint32_t DMACTDLAR; + uint32_t RESERVED39; + __IO uint32_t DMACRDLAR; + __IO uint32_t DMACTDTPR; + uint32_t RESERVED40; + __IO uint32_t DMACRDTPR; + __IO uint32_t DMACTDRLR; + __IO uint32_t DMACRDRLR; + __IO uint32_t DMACIER; + __IO uint32_t DMACRIWTR; +__IO uint32_t DMACSFCSR; + uint32_t RESERVED41; + __IO uint32_t DMACCATDR; + uint32_t RESERVED42; + __IO uint32_t DMACCARDR; + uint32_t RESERVED43; + __IO uint32_t DMACCATBR; + uint32_t RESERVED44; + __IO uint32_t DMACCARBR; + __IO uint32_t DMACSR; +uint32_t RESERVED45[2]; +__IO uint32_t DMACMFCR; +}ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x08 */ + uint32_t RESERVED1[5]; /*!< Reserved 1, Address offset: 0x0C-0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x28 */ + uint32_t RESERVED2[21]; /*!< Reserved 2, Address offset: 0x2C-0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x84 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x88 */ + uint32_t RESERVED3; /*!< Reserved 3, Address offset: 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x94 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x98 */ + uint32_t RESERVED4; /*!< Reserved 4, Address offset: 0x9C */ + __IO uint32_t IMR3; /*!< EXTI Interrupt mask register 3, Address offset: 0xA0 */ + __IO uint32_t EMR3; /*!< EXTI Event mask register 3, Address offset: 0xA4 */ +} EXTI_TypeDef; + +/** + * @brief FD Controller Area Network + */ +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ + uint32_t RESERVED1[128];/*!< Reserved, 0x100 + 0x004 - 0x100 + 0x200 */ + __IO uint32_t OPTR; /*!< FDCAN option register, Address offset: 0x100 + 0x204 */ + uint32_t RESERVED2[58]; /*!< Reserved, 0x100 + 0x208 - 0x100 + 0x2EC */ + __IO uint32_t HWCFG; /*!< FDCAN hardware configuration register, Address offset: 0x100 + 0x2F0 */ + __IO uint32_t VERR; /*!< FDCAN IP version register, Address offset: 0x100 + 0x2F4 */ + __IO uint32_t IPIDR; /*!< FDCAN IP ID register, Address offset: 0x100 + 0x2F8 */ + __IO uint32_t SIDR; /*!< FDCAN size ID register, Address offset: 0x100 + 0x2FC */ +} FDCAN_Config_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x000 */ + __IO uint32_t KEYR; /*!< FLASH control key register, Address offset: 0x004 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x008 - 0x00C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x010 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t IER; /*!< FLASH interrupt enable register, Address offset: 0x020 */ + __IO uint32_t ISR; /*!< FLASH interrupt status register, Address offset: 0x024 */ + __IO uint32_t ICR; /*!< FLASH interrupt clear register, Address offset: 0x028 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x02C */ + __IO uint32_t CRCCR; /*!< FLASH CRC control register, Address offset: 0x030 */ + __IO uint32_t CRCSADDR; /*!< FLASH CRC start address register, Address offset: 0x034 */ + __IO uint32_t CRCEADDR; /*!< FLASH CRC end address register, Address offset: 0x038 */ + __IO uint32_t CRCDATAR; /*!< FLASH CRC data register, Address offset: 0x03C */ + __IO uint32_t ECCSFADDR; /*!< FLASH ECC single fail address register, Address offset: 0x040 */ + __IO uint32_t ECCDFADDR; /*!< FLASH ECC double fail address register, Address offset: 0x044 */ + uint32_t RESERVED4[46]; /*!< Reserved, Address offset: 0x048 - 0x0FC */ + __IO uint32_t OPTKEYR; /*!< FLASH options key register, Address offset: 0x100 */ + __IO uint32_t OPTCR; /*!< FLASH options control register, Address offset: 0x104 */ + __IO uint32_t OPTISR; /*!< FLASH options interrupt status register, Address offset: 0x108 */ + __IO uint32_t OPTICR; /*!< FLASH options interrupt clear register, Address offset: 0x10C */ + __IO uint32_t OBKCR; /*!< FLASH option byte key control register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x114 */ + __IO uint32_t OBKDR[8]; /*!< FLASH option bytes key data register, Address offset: 0x118 - 0x134 */ + uint32_t RESERVED6[50]; /*!< Reserved, Address offset: 0x138 - 0x1FC */ + __IO uint32_t NVSR; /*!< FLASH non-volatile status register, Address offset: 0x200 */ + __IO uint32_t NVSRP; /*!< FLASH security status register programming, Address offset: 0x204 */ + __IO uint32_t ROTSR; /*!< FLASH RoT status register, Address offset: 0x208 */ + __IO uint32_t ROTSRP; /*!< FLASH RoT status register programming, Address offset: 0x20C */ + __IO uint32_t OTPLSR; /*!< FLASH OTP lock status register, Address offset: 0x210 */ + __IO uint32_t OTPLSRP; /*!< FLASH OTP lock status programming register, Address offset: 0x214 */ + __IO uint32_t WRPSR; /*!< FLASH write protection status register, Address offset: 0x218 */ + __IO uint32_t WRPSRP; /*!< FLASH write protection status register programming, Address offset: 0x21C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x220 - 0x22C */ + __IO uint32_t HDPSR; /*!< FLASH hide protection status register, Address offset: 0x230 */ + __IO uint32_t HDPSRP; /*!< FLASH hide protection status register programming, Address offset: 0x234 */ + uint32_t RESERVED8[6]; /*!< Reserved, Address offset: 0x238 - 0x24C */ + __IO uint32_t EPOCHSR; /*!< FLASH epoch status register, Address offset: 0x250 */ + __IO uint32_t EPOCHSRP; /*!< FLASH epoch status register programming, Address offset: 0x254 */ + uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x258 - 0x25C */ + __IO uint32_t OBW1SR; /*!< FLASH option byte word 1 status register, Address offset: 0x260 */ + __IO uint32_t OBW1SRP; /*!< FLASH option byte word 1 status register programming, Address offset: 0x264 */ + __IO uint32_t OBW2SR; /*!< FLASH option byte word 2 status register, Address offset: 0x268 */ + __IO uint32_t OBW2SRP; /*!< FLASH option byte word 2 status register programming, Address offset: 0x26C */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 + */ +typedef struct { + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 Extended + */ +typedef struct { + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ +typedef struct { + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 & 6 + */ +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140 - 0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148 - 0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief GFXMMU + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXMMU configuration register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< GFXMMU status register, Address offset: 0x04 */ + __IO uint32_t FCR; /*!< GFXMMU flag clear register, Address offset: 0x08 */ + uint32_t RESERVED0; /*!< Reserved0, Address offset: 0x0C */ + __IO uint32_t DVR; /*!< GFXMMU default value register, Address offset: 0x10 */ + __IO uint32_t DAR; /*!< GFXMMU default alpha register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved1, Address offset: 0x18 to 0x1C */ + __IO uint32_t B0CR; /*!< GFXMMU buffer 0 configuration register, Address offset: 0x20 */ + __IO uint32_t B1CR; /*!< GFXMMU buffer 1 configuration register, Address offset: 0x24 */ + __IO uint32_t B2CR; /*!< GFXMMU buffer 2 configuration register, Address offset: 0x28 */ + __IO uint32_t B3CR; /*!< GFXMMU buffer 3 configuration register, Address offset: 0x2C */ + uint32_t RESERVED2[1012]; /*!< Reserved2, Address offset: 0x30 to 0xFFC */ + __IO uint32_t LUT[2048]; /*!< GFXMMU LUT registers, Address offset: 0x1000 to 0x2FFC + For LUT line i, LUTiL = LUT[2*i] and LUTiH = LUT[(2*i)+1] */ +} GFXMMU_TypeDef; + +/** + * @brief HASH + */ +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[103]; /*!< HASH context swap registers, Address offset: 0x0F8-0x290 */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ +typedef struct +{ + __IO uint32_t HR[16]; /*!< HASH digest registers, Address offset: 0x310-0x34C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Improved Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< I3C Control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< I3C Controller Configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x08-0x0C */ + __IO uint32_t RDR; /*!< I3C Received Data register, Address offset: 0x10 */ + __IO uint32_t RDWR; /*!< I3C Received Data Word register, Address offset: 0x14 */ + __IO uint32_t TDR; /*!< I3C Transmit Data register, Address offset: 0x18 */ + __IO uint32_t TDWR; /*!< I3C Transmit Data Word register, Address offset: 0x1C */ + __IO uint32_t IBIDR; /*!< I3C IBI payload Data register, Address offset: 0x20 */ + __IO uint32_t TGTTDR; /*!< I3C Target Transmit register, Address offset: 0x24 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x28-0x2C */ + __IO uint32_t SR; /*!< I3C Status register, Address offset: 0x30 */ + __IO uint32_t SER; /*!< I3C Status Error register, Address offset: 0x34 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t RMR; /*!< I3C Received Message register, Address offset: 0x40 */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x44-0x4C */ + __IO uint32_t EVR; /*!< I3C Event register, Address offset: 0x50 */ + __IO uint32_t IER; /*!< I3C Interrupt Enable register, Address offset: 0x54 */ + __IO uint32_t CEVR; /*!< I3C Clear Event register, Address offset: 0x58 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t DEVR0; /*!< I3C own Target characteristics register, Address offset: 0x60 */ + __IO uint32_t DEVRX[4]; /*!< I3C Target x (1<=x<=4) register, Address offset: 0x64-0x70 */ + uint32_t RESERVED6[7]; /*!< Reserved, Address offset: 0x74-0x8C */ + __IO uint32_t MAXRLR; /*!< I3C Maximum Read Length register, Address offset: 0x90 */ + __IO uint32_t MAXWLR; /*!< I3C Maximum Write Length register, Address offset: 0x94 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0x98-0x9C */ + __IO uint32_t TIMINGR0; /*!< I3C Timing 0 register, Address offset: 0xA0 */ + __IO uint32_t TIMINGR1; /*!< I3C Timing 1 register, Address offset: 0xA4 */ + __IO uint32_t TIMINGR2; /*!< I3C Timing 2 register, Address offset: 0xA8 */ + uint32_t RESERVED9[5]; /*!< Reserved, Address offset: 0xAC-0xBC */ + __IO uint32_t BCR; /*!< I3C Bus Characteristics register, Address offset: 0xC0 */ + __IO uint32_t DCR; /*!< I3C Device Characteristics register, Address offset: 0xC4 */ + __IO uint32_t GETCAPR; /*!< I3C GET CAPabilities register, Address offset: 0xC8 */ + __IO uint32_t CRCAPR; /*!< I3C Controller CAPabilities register, Address offset: 0xCC */ + __IO uint32_t GETMXDSR; /*!< I3C GET Max Data Speed register, Address offset: 0xD0 */ + __IO uint32_t EPIDR; /*!< I3C Extended Provisioned ID register, Address offset: 0xD4 */ +} I3C_TypeDef; + + +/** + * @brief Instruction Cache + */ + +typedef struct +{ + __IO uint32_t CR; /*!< ICACHE control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< ICACHE status register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< ICACHE interrupt enable register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< ICACHE flag clear register, Address offset: 0x0C */ + __IO uint32_t HMONR; /*!< ICACHE hit monitor register, Address offset: 0x10 */ + __IO uint32_t MMONR; /*!< ICACHE miss monitor register, Address offset: 0x14 */ +} ICACHE_TypeDef; + +/** + * @brief IWDG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ + __IO uint32_t EWCR; /*!< IWDG Early Wakeup register, Address offset: 0x14 */ +} IWDG_TypeDef; + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 0x00 */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 0x04 */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 0x08 */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0x0C */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 0x10 */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 0x14 */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 0x18 */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 0x1C */ + uint32_t RESERVED0[4]; /* Reserved Address offset: 0x20-0x2C */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 0x30 */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 0x34 */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 0x38 */ + uint32_t RESERVED1; /* Reserved Address offset: 0x3C */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 0x40 */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 0x44 */ + uint32_t RESERVED2[2]; /* Reserved Address offset: 0x48-0x4C */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 0x50-0x8C */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 0x90-0xCC */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: 0xD0-0x10C */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 0x110-0x14C */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 0x150-0x18C */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 0x190-0x20C */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 0x210-0x35C */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 0x360-0x4F8 */ + uint32_t RESERVED3; /* Reserved Address offset: 0x4FC */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 0x500-0x65C */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 0x660-0x7BC */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 0x7C0-0x7DC */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 0x7E0-0x7FC */ +} JPEG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t DIER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< LPTIM Capture/Compare register 1, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register 2, Address offset: 0x24 */ + __IO uint32_t RCR; /*!< LPTIM Repetition register, Address offset: 0x28 */ + __IO uint32_t CCMR1; /*!< LPTIM Capture/Compare mode register, Address offset: 0x2C */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x30 */ + __IO uint32_t CCR2; /*!< LPTIM Capture/Compare register 2, Address offset: 0x34 */ +} LPTIM_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + +/** + * @brief ADF + */ +typedef struct +{ + __IO uint32_t GCR; /*!< MDF Global Control register, Address offset: 0x00 */ + __IO uint32_t CKGCR; /*!< MDF Clock Generator Control Register, Address offset: 0x04 */ +} MDF_TypeDef; + +/** + * @brief ADF filter + */ +typedef struct +{ + __IO uint32_t SITFCR; /*!< MDF Serial Interface Control Register, Address offset: 0x80 */ + __IO uint32_t BSMXCR; /*!< MDF Bitstream Matrix Control Register, Address offset: 0x84 */ + __IO uint32_t DFLTCR; /*!< MDF Digital Filter Control Register, Address offset: 0x88 */ + __IO uint32_t DFLTCICR; /*!< MDF MCIC Configuration Register, Address offset: 0x8C */ + __IO uint32_t DFLTRSFR; /*!< MDF Reshape Filter Configuration Register, Address offset: 0x90 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x94-0xA0 */ + __IO uint32_t DLYCR; /*!< MDF Delay control Register, Address offset: 0xA4 */ + uint32_t RESERVED1[1]; /*!< Reserved, 0xA8 */ + __IO uint32_t DFLTIER; /*!< MDF DFLT Interrupt enable Register, Address offset: 0xAC */ + __IO uint32_t DFLTISR; /*!< MDF DFLT Interrupt status Register, Address offset: 0xB0 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0xB4 */ + __IO uint32_t SADCR; /*!< MDF SAD Control Register, Address offset: 0xB8 */ + __IO uint32_t SADCFGR; /*!< MDF SAD configuration register, Address offset: 0xBC */ + __IO uint32_t SADSDLVR; /*!< MDF SAD Sound level Register, Address offset: 0xC0 */ + __IO uint32_t SADANLVR; /*!< MDF SAD Ambient Noise level Register, Address offset: 0xC4 */ + uint32_t RESERVED3[10]; /*!< Reserved, 0xC8-0xEC */ + __IO uint32_t DFLTDR; /*!< MDF Digital Filter Data Register, Address offset: 0xF0 */ +} MDF_Filter_TypeDef; + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved, 0xA4-0xA8 */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved, 0xB8-0xC0 */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0xC4 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief XSPI + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPI Control Register, Address offset: 0x000 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x004 */ + __IO uint32_t DCR1; /*!< XSPI Device Configuration Register 1, Address offset: 0x008 */ + __IO uint32_t DCR2; /*!< XSPI Device Configuration Register 2, Address offset: 0x00C */ + __IO uint32_t DCR3; /*!< XSPI Device Configuration Register 3, Address offset: 0x010 */ + __IO uint32_t DCR4; /*!< XSPI Device Configuration Register 4, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t SR; /*!< XSPI Status Register, Address offset: 0x020 */ + __IO uint32_t FCR; /*!< XSPI Flag Clear Register, Address offset: 0x024 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x028 - 0x03C */ + __IO uint32_t DLR; /*!< XSPI Data Length Register, Address offset: 0x040 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x044 */ + __IO uint32_t AR; /*!< XSPI Address Register, Address offset: 0x048 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x04C */ + __IO uint32_t DR; /*!< XSPI Data Register, Address offset: 0x050 */ + uint32_t RESERVED6[11]; /*!< Reserved, Address offset: 0x054 - 0x07C */ + __IO uint32_t PSMKR; /*!< XSPI Polling Status Mask Register, Address offset: 0x080 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x084 */ + __IO uint32_t PSMAR; /*!< XSPI Polling Status Match Register, Address offset: 0x088 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0x08C */ + __IO uint32_t PIR; /*!< XSPI Polling Interval Register, Address offset: 0x090 */ + uint32_t RESERVED9[27]; /*!< Reserved, Address offset: 0x094 - 0x0FC */ + __IO uint32_t CCR; /*!< XSPI Communication Configuration Register, Address offset: 0x100 */ + uint32_t RESERVED10; /*!< Reserved, Address offset: 0x104 */ + __IO uint32_t TCR; /*!< XSPI Timing Configuration Register, Address offset: 0x108 */ + uint32_t RESERVED11; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t IR; /*!< XSPI Instruction Register, Address offset: 0x110 */ + uint32_t RESERVED12[3]; /*!< Reserved, Address offset: 0x114 - 0x11C */ + __IO uint32_t ABR; /*!< XSPI Alternate Bytes Register, Address offset: 0x120 */ + uint32_t RESERVED13[3]; /*!< Reserved, Address offset: 0x124 - 0x12C */ + __IO uint32_t LPTR; /*!< XSPI Low-Power Timeout Register, Address offset: 0x130 */ + uint32_t RESERVED14[3]; /*!< Reserved, Address offset: 0x134 - 0x13C */ + __IO uint32_t WPCCR; /*!< XSPI Wrap Communication Configuration Register, Address offset: 0x140 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x144 */ + __IO uint32_t WPTCR; /*!< XSPI Wrap Timing Configuration Register, Address offset: 0x148 */ + uint32_t RESERVED16; /*!< Reserved, Address offset: 0x14C */ + __IO uint32_t WPIR; /*!< XSPI Wrap Instruction Register, Address offset: 0x150 */ + uint32_t RESERVED17[3]; /*!< Reserved, Address offset: 0x154 - 0x15C */ + __IO uint32_t WPABR; /*!< XSPI Wrap Alternate Bytes Register, Address offset: 0x160 */ + uint32_t RESERVED18[7]; /*!< Reserved, Address offset: 0x164 - 0x17C */ + __IO uint32_t WCCR; /*!< XSPI Write Communication Configuration Register, Address offset: 0x180 */ + uint32_t RESERVED19; /*!< Reserved, Address offset: 0x184 */ + __IO uint32_t WTCR; /*!< XSPI Write Timing Configuration Register, Address offset: 0x188 */ + uint32_t RESERVED20; /*!< Reserved, Address offset: 0x18C */ + __IO uint32_t WIR; /*!< XSPI Write Instruction Register, Address offset: 0x190 */ + uint32_t RESERVED21[3]; /*!< Reserved, Address offset: 0x194 - 0x19C */ + __IO uint32_t WABR; /*!< XSPI Write Alternate Bytes Register, Address offset: 0x1A0 */ + uint32_t RESERVED22[23]; /*!< Reserved, Address offset: 0x1A4 - 0x1FC */ + __IO uint32_t HLCR; /*!< XSPI HyperBus Latency Configuration Register, Address offset: 0x200 */ + uint32_t RESERVED23[3]; /*!< Reserved, Address offset: 0x204 - 0x20C */ + __IO uint32_t CALFCR; /*!< XSPI Full-Cycle Calibration Configuration Register, Address offset: 0x210 */ + uint32_t RESERVED24; /*!< Reserved, Address offset: 0x214 */ + __IO uint32_t CALMR; /*!< XSPI DLL Master Calibration Configuration Register, Address offset: 0x218 */ + uint32_t RESERVED25; /*!< Reserved, Address offset: 0x21C */ + __IO uint32_t CALSOR; /*!< XSPI Slave Output Calibration Configuration Register, Address offset: 0x220 */ + uint32_t RESERVED26; /*!< Reserved, Address offset: 0x224 */ + __IO uint32_t CALSIR; /*!< XSPI Slave Input Calibration Configuration Register, Address offset: 0x228 */ +} XSPI_TypeDef; + +/** + * @brief XSPI IO Manager + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPIM IO Manager Control Register, Address offset: 0x00 */ +} XSPIM_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x04 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control status register 2, Address offset: 0x0C */ + __IO uint32_t CSR3; /*!< PWR power control status register 3, Address offset: 0x10 */ + __IO uint32_t CSR4; /*!< PWR power control status register 4, Address offset: 0x14 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ + __IO uint32_t UCPDR; /*!< PWR USB Type-C and power delivery register, Address offset: 0x2C */ + __IO uint32_t APCR; /*!< PWR apply pull configuration register, Address offset: 0x30 */ + __IO uint32_t PUCRN; /*!< PWR port N pull-up control register, Address offset: 0x34 */ + __IO uint32_t PDCRN; /*!< PWR port N pull-down control register, Address offset: 0x38 */ + __IO uint32_t PUCRO; /*!< PWR port O pull-up control register, Address offset: 0x3C */ + __IO uint32_t PDCRO; /*!< PWR port O pull-down control register, Address offset: 0x40 */ + __IO uint32_t PDCRP; /*!< PWR port P pull-down control register, Address offset: 0x44 */ + uint32_t RESERVED2[2]; /*!< Reserved */ + __IO uint32_t PDR1; /*!< PWR debug register 1, Address offset: 0x50 */ +} PWR_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved, Address offset: 0x000C-0x03FC */ + __IO uint32_t RAM[1334]; /*!< PKA RAM Address offset: 0x0400-0x18D8 */ +} PKA_TypeDef; + +/** + * @brief PSSI + */ +typedef struct +{ + __IO uint32_t CR; /*!< PSSI control register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< PSSI status register, Address offset: 0x004 */ + __IO uint32_t RIS; /*!< PSSI raw interrupt status register, Address offset: 0x008 */ + __IO uint32_t IER; /*!< PSSI interrupt enable register, Address offset: 0x00C */ + __IO uint32_t MIS; /*!< PSSI masked interrupt status register, Address offset: 0x010 */ + __IO uint32_t ICR; /*!< PSSI interrupt clear register, Address offset: 0x014 */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x018 - 0x024 */ + __IO uint32_t DR; /*!< PSSI data register, Address offset: 0x028 */ +} PSSI_TypeDef; + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI clock calibration register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock recovery RC register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI clock calibration register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CDCFGR; /*!< RCC CPU domain configuration register, Address offset: 0x18 */ + __IO uint32_t BMCFGR; /*!< RCC Bus matrix configuration register, Address offset: 0x1C */ + __IO uint32_t APBCFGR; /*!< RCC APB clock configuration register, Address offset: 0x20 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs clock source selection register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs configuration register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR1; /*!< RCC PLL1 dividers configuration register 1, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 fractional divider configuration register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR1; /*!< RCC PLL2 dividers configuration register 1, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 fractional divider configuration register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR1; /*!< RCC PLL3 dividers configuration register 1, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 fractional divider configuration register, Address offset: 0x44 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t CCIPR1; /*!< RCC AHB peripherals kernel clock configuration register Address offset: 0x4C */ + __IO uint32_t CCIPR2; /*!< RCC APB1 peripherals kernel clock configuration register Address offset: 0x50 */ + __IO uint32_t CCIPR3; /*!< RCC APB2 peripherals kernel clock configuration register Address offset: 0x54 */ + __IO uint32_t CCIPR4; /*!< RCC APB4/APB5 peripherals kernel clock configuration register Address offset: 0x58 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x68 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB5RSTR; /*!< RCC AHB5 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB5RSTR; /*!< RCC APB5 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x90 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0xA0 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0xA4 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0xA8-0xAC */ + __IO uint32_t CKGDISR ; /*!< RCC AXI clocks gating disable register, Address offset: 0xB0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xB4-0xBC */ + __IO uint32_t PLL1DIVR2; /*!< RCC PLL1 dividers configuration register 2, Address offset: 0xC0 */ + __IO uint32_t PLL2DIVR2; /*!< RCC PLL2 dividers configuration register 2, Address offset: 0xC4 */ + __IO uint32_t PLL3DIVR2; /*!< RCC PLL3 dividers configuration register 2, Address offset: 0xC8 */ + __IO uint32_t PLL1SSCGR; /*!< RCC PLL1 spread spectrum clock generator register, Address offset: 0xCC */ + __IO uint32_t PLL2SSCGR; /*!< RCC PLL2 spread spectrum clock generator register, Address offset: 0xD0 */ + __IO uint32_t PLL3SSCGR; /*!< RCC PLL3 spread spectrum clock generator register, Address offset: 0xD4 */ + uint32_t RESERVED9[10]; /*!< Reserved, Address offset: 0xD8-0xFC */ + __IO uint32_t CKPROTR; /*!< RCC clock protection register, Address offset: 0x100 */ + uint32_t RESERVED10[11]; /*!< Reserved, Address offset: 0x104-0x12C */ + __IO uint32_t RSR; /*!< RCC reset status register, Address offset: 0x130 */ + __IO uint32_t AHB5ENR; /*!< RCC AHB5 peripheral clocks enable register, Address offset: 0x134 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x138 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x13C */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clocks enable register, Address offset: 0x140 */ + __IO uint32_t APB5ENR; /*!< RCC APB5 peripheral clocks enable register, Address offset: 0x144 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x148 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x14C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x150 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clocks enable register, Address offset: 0x154 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x158 */ + __IO uint32_t AHB5LPENR; /*!< RCC AHB5 peripheral sleep clocks enable register, Address offset: 0x15C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clocks enable register, Address offset: 0x160 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clocks enable register, Address offset: 0x164 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clocks enable register, Address offset: 0x168 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clocks enable register, Address offset: 0x16C */ + __IO uint32_t APB1LPENR1; /*!< RCC APB1 peripheral sleep clocks enable register 1, Address offset: 0x170 */ + __IO uint32_t APB1LPENR2; /*!< RCC APB1 peripheral sleep clocks enable register 2, Address offset: 0x174 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clocks enable register, Address offset: 0x178 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clocks enable register, Address offset: 0x17C */ + __IO uint32_t APB5LPENR; /*!< RCC APB5 peripheral sleep clocks enable register, Address offset: 0x180 */ +} RCC_TypeDef; + +/** + * @brief Random Number Generator + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ + uint32_t RESERVED; + __IO uint32_t HTCR; /*!< RNG health test configuration register, Address offset: 0x10 */ +} RNG_TypeDef; + +/* +* @brief RTC Specific device feature definitions +*/ +#define RTC_BKP_NB 32U +#define RTC_TAMP_NB 8U + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + __IO uint32_t PRIVCFGR; /*!< RTC privilege mode control register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x3C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC masked interrupt status register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC status Clear register, Address offset: 0x5C */ + uint32_t RESERVED3[4];/*!< Reserved, Address offset: 0x58 */ + __IO uint32_t ALRABINR; /*!< RTC alarm A binary mode register, Address offset: 0x70 */ + __IO uint32_t ALRBBINR; /*!< RTC alarm B binary mode register, Address offset: 0x74 */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED[16]; /*!< Reserved, Address offset: 0x04 to 0x40 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief System configuration, boot and security controller + */ +typedef struct +{ + __IO uint32_t BOOTSR; /*!< SBS Boot Status register, Address offset: 0x00 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x04-0x0C */ + __IO uint32_t HDPLCR; /*!< SBS Hide Protection Control register, Address offset: 0x10 */ + __IO uint32_t HDPLSR; /*!< SBS Hide Protection Status register, Address offset: 0x14 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t DBGCR; /*!< SBS Debug Control register, Address offset: 0x20 */ + __IO uint32_t DBGLOCKR; /*!< SBS Debug Lock register, Address offset: 0x24 */ + uint32_t RESERVED3[3]; /*!< Reserved, Address offset: 0x28-0x30 */ + __IO uint32_t RSSCMDR; /*!< SBS RSS Command register, Address offset: 0x34 */ + uint32_t RESERVED4[50]; /*!< Reserved, Address offset: 0x38-0xFC */ + __IO uint32_t PMCR; /*!< SBS Product Mode & Config register, Address offset: 0x100 */ + __IO uint32_t FPUIMR; /*!< SBS FPU Interrupt Mask register, Address offset: 0x104 */ + __IO uint32_t MESR; /*!< SBS Memory Erase Status register, Address offset: 0x108 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t CCCSR; /*!< SBS IO Compensation Cell Control and Status register, Address offset: 0x110 */ + __IO uint32_t CCVALR; /*!< SBS IO Compensation Cell Value register, Address offset: 0x114 */ + __IO uint32_t CCSWVALR; /*!< SBS IO Compensation Cell Software Value register, Address offset: 0x118 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x11C */ + __IO uint32_t BKLOCKR; /*!< SBS Break Lockup register, Address offset: 0x120 */ + uint32_t RESERVED7[3]; /*!< Reserved, Address offset: 0x124-0x12C */ + __IO uint32_t EXTICR[4]; /*!< SBS External Interrupt Configuration registers, Address offset: 0x130-0x13C */ +} SBS_TypeDef; + +/** + * @brief Secure Digital Card/IO Embedded MultiMediaCard Interface + */ +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC Power control register, Address offset : 0x000 */ + __IO uint32_t CLKCR; /*!< SDMMC Clock control register, Address offset : 0x004 */ + __IO uint32_t ARG; /*!< SDMMC Argument register, Address offset : 0x008 */ + __IO uint32_t CMD; /*!< SDMMC Command register, Address offset : 0x00C */ + __IO uint32_t RESPCMD; /*!< SDMMC Command response register, Address offset : 0x010 */ + __IO uint32_t RESP1; /*!< SDMMC Response 1 register, Address offset : 0x014 */ + __IO uint32_t RESP2; /*!< SDMMC Response 2 register, Address offset : 0x018 */ + __IO uint32_t RESP3; /*!< SDMMC Response 3 register, Address offset : 0x01C */ + __IO uint32_t RESP4; /*!< SDMMC Response 4 register, Address offset : 0x020 */ + __IO uint32_t DTIMER; /*!< SDMMC Data timer register, Address offset : 0x024 */ + __IO uint32_t DLEN; /*!< SDMMC Data length register, Address offset : 0x028 */ + __IO uint32_t DCTRL; /*!< SDMMC Data control register, Address offset : 0x02C */ + __IO uint32_t DCOUNT; /*!< SDMMC Data counter register, Address offset : 0x030 */ + __IO uint32_t STA; /*!< SDMMC Status register, Address offset : 0x034 */ + __IO uint32_t ICR; /*!< SDMMC Interrupt clear register, Address offset : 0x038 */ + __IO uint32_t MASK; /*!< SDMMC Mask register, Address offset : 0x03C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset : 0x040 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset : 0x044 - 0x04C */ + __IO uint32_t IDMACTRL; /*!< SDMMC IDMA control register, Address offset : 0x050 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC IDMA buffer size register, Address offset : 0x054 */ + __IO uint32_t IDMABASER; /*!< SDMMC IDMA buffer base address register, Address offset : 0x058 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset : 0x05C - 0x060 */ + __IO uint32_t IDMALAR; /*!< SDMMC IDMA linked list address register, Address offset : 0x064 */ + __IO uint32_t IDMABAR; /*!< SDMMC IDMA linked list memory base register, Address offset : 0x068 */ + uint32_t RESERVED2[5]; /*!< Reserved, Address offset : 0x06C - 0x07C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset : 0x080 */ +} SDMMC_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + +/** + * @brief SPI + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t TXDR; /*!< SPI Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ +} SPI_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< TAMP configuration register 3, Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< TAMP filter control register, Address offset: 0x0C */ + __IO uint32_t ATCR1; /*!< TAMP filter control register 1 Address offset: 0x10 */ + __IO uint32_t ATSEEDR; /*!< TAMP active tamper seed register, Address offset: 0x14 */ + __IO uint32_t ATOR; /*!< TAMP active tamper output register, Address offset: 0x18 */ + __IO uint32_t ATCR2; /*!< TAMP filter control register 2, Address offset: 0x1C */ + __IO uint32_t CFGR; /*!< TAMP configuration control register, Address offset: 0x20 */ + __IO uint32_t PRIVCFGR; /*!< TAMP privilege mode control register, Address offset: 0x24 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t IER; /*!< TAMP interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP masked interrupt status register, Address offset: 0x34 */ + __IO uint32_t RESERVED3; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP status clear register, Address offset: 0x3C */ + __IO uint32_t COUNT1R; /*!< TAMP monotonic counter 1 register, Address offset: 0x40 */ + uint32_t RESERVED4[4]; /*!< Reserved, Address offset: 0x43 -- 0x50 */ + __IO uint32_t RPCFGR; /*!< TAMP resources protection configuration register, Address offset: 0x54 */ + uint32_t RESERVED5[42]; /*!< Reserved, Address offset: 0x58 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ + __IO uint32_t BKP5R; /*!< TAMP backup register 5, Address offset: 0x114 */ + __IO uint32_t BKP6R; /*!< TAMP backup register 6, Address offset: 0x118 */ + __IO uint32_t BKP7R; /*!< TAMP backup register 7, Address offset: 0x11C */ + __IO uint32_t BKP8R; /*!< TAMP backup register 8, Address offset: 0x120 */ + __IO uint32_t BKP9R; /*!< TAMP backup register 9, Address offset: 0x124 */ + __IO uint32_t BKP10R; /*!< TAMP backup register 10, Address offset: 0x128 */ + __IO uint32_t BKP11R; /*!< TAMP backup register 11, Address offset: 0x12C */ + __IO uint32_t BKP12R; /*!< TAMP backup register 12, Address offset: 0x130 */ + __IO uint32_t BKP13R; /*!< TAMP backup register 13, Address offset: 0x134 */ + __IO uint32_t BKP14R; /*!< TAMP backup register 14, Address offset: 0x138 */ + __IO uint32_t BKP15R; /*!< TAMP backup register 15, Address offset: 0x13C */ + __IO uint32_t BKP16R; /*!< TAMP backup register 16, Address offset: 0x140 */ + __IO uint32_t BKP17R; /*!< TAMP backup register 17, Address offset: 0x144 */ + __IO uint32_t BKP18R; /*!< TAMP backup register 18, Address offset: 0x148 */ + __IO uint32_t BKP19R; /*!< TAMP backup register 19, Address offset: 0x14C */ + __IO uint32_t BKP20R; /*!< TAMP backup register 20, Address offset: 0x150 */ + __IO uint32_t BKP21R; /*!< TAMP backup register 21, Address offset: 0x154 */ + __IO uint32_t BKP22R; /*!< TAMP backup register 22, Address offset: 0x158 */ + __IO uint32_t BKP23R; /*!< TAMP backup register 23, Address offset: 0x15C */ + __IO uint32_t BKP24R; /*!< TAMP backup register 24, Address offset: 0x160 */ + __IO uint32_t BKP25R; /*!< TAMP backup register 25, Address offset: 0x164 */ + __IO uint32_t BKP26R; /*!< TAMP backup register 26, Address offset: 0x168 */ + __IO uint32_t BKP27R; /*!< TAMP backup register 27, Address offset: 0x16C */ + __IO uint32_t BKP28R; /*!< TAMP backup register 28, Address offset: 0x170 */ + __IO uint32_t BKP29R; /*!< TAMP backup register 29, Address offset: 0x174 */ + __IO uint32_t BKP30R; /*!< TAMP backup register 30, Address offset: 0x178 */ + __IO uint32_t BKP31R; /*!< TAMP backup register 31, Address offset: 0x17C */ +} TAMP_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register 5, Address offset: 0x48 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register 6, Address offset: 0x4C */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x50 */ + __IO uint32_t DTR2; /*!< TIM deadtime register 2, Address offset: 0x54 */ + __IO uint32_t ECR; /*!< TIM encoder control register, Address offset: 0x58 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + uint32_t RESERVED0[221]; /*!< Reserved, Address offset: 0x68 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x3DC */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x3E0 */ +} TIM_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t CFG3; /*!< UCPD configuration register 3, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ +} UCPD_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register, Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register, Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register, Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register, Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register, Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register, Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register, Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register, Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register, Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register, Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register, Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg, Address offset: 02Ch */ + __IO uint32_t Reserved30[2]; /*!< Reserved, Address offset: 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register, Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register, Address offset: 03Ch */ + __IO uint32_t GSNPSID; /*!< USB_OTG core ID, Address offset: 040h */ + __IO uint32_t GHWCFG1; /*!< User HW config1, Address offset: 044h */ + __IO uint32_t GHWCFG2; /*!< User HW config2, Address offset: 048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3, Address offset: 04Ch */ + __IO uint32_t Reserved6; /*!< Reserved, Address offset: 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register, Address offset: 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register, Address offset: 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register, Address offset: 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register, Address offset: 60Ch */ + __IO uint32_t Reserved43[39]; /*!< Reserved, Address offset: 058h */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg, Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 104h */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register, Address offset: 800h */ + __IO uint32_t DCTL; /*!< dev Control Register, Address offset: 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO), Address offset: 808h */ + uint32_t Reserved0C; /*!< Reserved, Address offset: 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask, Address offset: 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask, Address offset: 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg, Address offset: 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask, Address offset: 81Ch */ + uint32_t Reserved20; /*!< Reserved, Address offset: 820h */ + uint32_t Reserved9; /*!< Reserved, Address offset: 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register, Address offset: 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register, Address offset: 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold, Address offset: 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk, Address offset: 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt, Address offset: 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk, Address offset: 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask, Address offset: 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask, Address offset: 844h */ + uint32_t Reserved44[15]; /*!< Reserved, Address offset: 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk, Address offset: 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Register, Address offset: 900h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Register, Address offset: 900h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size Register, Address offset: 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Register, Address offset: 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Register, Address offset: 900h + (ep_num * 20h) + 18h */ + __IO uint32_t Reserved18; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Register, Address offset: B00h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Register, Address offset: B00h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size Register, Address offset: B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address Register, Address offset: B00h + (ep_num * 20h) + 14h */ + __IO uint32_t Reserved18[2]; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 18h */ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register, Address offset: 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register, Address offset: 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining, Address offset: 408h */ + uint32_t Reserved40C; /*!< Reserved, Address offset: 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status, Address offset: 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register, Address offset: 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask, Address offset: 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register, Address offset: 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register, Address offset: 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register, Address offset: 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register, Address offset: 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register, Address offset: 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register, Address offset: 514h */ + uint32_t Reserved[2]; /*!< Reserved, Address offset: 518h */ +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Window Watchdog + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/*@}*/ /* end of group STM32H7RSxx_peripherals */ + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + +/** @addtogroup STM32H7RSxx_Peripheral_peripheralAddr + * @{ + */ +#define ITCM_BASE 0x00000000UL /*!< ITCM base address */ +#define FLASH_BASE 0x08000000UL /*!< User Flash address */ +#define OTP_AREA_BASE 0x08FFF000UL /*!< OTP Area base address */ +#define ENGI_BYTES_BASE 0x52002800UL /*!< Engi Bytes */ +#define SYSTEM_FLASH_BASE 0x1FF00000UL /*!< System Flash base address */ +#define DTCM_BASE 0x20000000UL /*!< DTCM base address */ +#define SRAM1_AXI_BASE 0x24000000UL /*!< SRAM1 base address - accessible over AXI */ +#define SRAM2_AXI_BASE 0x24020000UL /*!< SRAM2 base address - accessible over AXI */ +#define SRAM3_AXI_BASE 0x24040000UL /*!< SRAM3 base address - accessible over AXI */ +#define SRAM4_AXI_BASE 0x24060000UL /*!< SRAM4 base address - accessible over AXI */ + +#define GFXMMU_VIRTUAL_BUFFER0_BASE 0x25000000UL /*!< GFXMMU virtual buffer 0 base address */ +#define GFXMMU_VIRTUAL_BUFFER1_BASE 0x25400000UL /*!< GFXMMU virtual buffer 1 base address */ +#define GFXMMU_VIRTUAL_BUFFER2_BASE 0x25800000UL /*!< GFXMMU virtual buffer 2 base address */ +#define GFXMMU_VIRTUAL_BUFFER3_BASE 0x25C00000UL /*!< GFXMMU virtual buffer 3 base address */ + +#define SRAM1_AHB_BASE 0x30000000UL /*!< SRAM1 base address */ +#define SRAM2_AHB_BASE 0x30004000UL /*!< SRAM2 base address */ +#define BKPSRAM_BASE 0x38800000UL /*!< Backup SRAM */ + +#define PERIPH_BASE 0x40000000UL /*!< AHB and APB Peripherals base address */ +#define XSPI2_BASE 0x70000000UL /*!< XSPI2 base address */ +#define XSPI1_BASE 0x90000000UL /*!< XSPI1 base address */ + +/*!< Internal memory size */ +#define ITCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define DTCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define FLASH_SIZE 0x00010000UL /*!< 64 KB */ +#define SRAM1_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase ITCM */ +#define SRAM2_AXI_SIZE 0x00020000UL /*!< 128 KB */ +#define SRAM3_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase DTCM */ +#define SRAM4_AXI_SIZE 0x00012000UL /*!< 72 KB default, can be decreased to 0 KB when RAM ECC is disable */ +#define SRAM_AHB_SIZE 0x00004000UL /*!< Both AHB SRAMs are 16 KB */ +#define BKPSRAM_SIZE 0x00001000UL /*!< 4 KB */ + +/*!< OTP Area size */ +#define OTP_SIZE 0x400U /* 1 KB */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x02000000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x08020000UL) +#define APB5PERIPH_BASE (PERIPH_BASE + 0x10000000UL) +#define AHB5PERIPH_BASE (PERIPH_BASE + 0x12000000UL) +#define APB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18020000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I3C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00UL) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x8400UL) +#define MDIOS_BASE (APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (APB1PERIPH_BASE + 0xA000UL) +#define FDCAN_CONFIG_BASE (APB1PERIPH_BASE + 0xA100UL) /*!< FDCAN configuration registers base address */ +#define FDCAN2_BASE (APB1PERIPH_BASE + 0xA400UL) +#define SRAMCAN_BASE (APB1PERIPH_BASE + 0xAC00UL) +#define UCPD1_BASE (APB1PERIPH_BASE + 0xEC00UL) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00UL) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) + +/*!< AHB1 peripherals */ +#define GPDMA1_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define GPDMA1_Channel0_BASE (GPDMA1_BASE + 0x0050UL) +#define GPDMA1_Channel1_BASE (GPDMA1_BASE + 0x00D0UL) +#define GPDMA1_Channel2_BASE (GPDMA1_BASE + 0x0150UL) +#define GPDMA1_Channel3_BASE (GPDMA1_BASE + 0x01D0UL) +#define GPDMA1_Channel4_BASE (GPDMA1_BASE + 0x0250UL) +#define GPDMA1_Channel5_BASE (GPDMA1_BASE + 0x02D0UL) +#define GPDMA1_Channel6_BASE (GPDMA1_BASE + 0x0350UL) +#define GPDMA1_Channel7_BASE (GPDMA1_BASE + 0x03D0UL) +#define GPDMA1_Channel8_BASE (GPDMA1_BASE + 0x0450UL) +#define GPDMA1_Channel9_BASE (GPDMA1_BASE + 0x04D0UL) +#define GPDMA1_Channel10_BASE (GPDMA1_BASE + 0x0550UL) +#define GPDMA1_Channel11_BASE (GPDMA1_BASE + 0x05D0UL) +#define GPDMA1_Channel12_BASE (GPDMA1_BASE + 0x0650UL) +#define GPDMA1_Channel13_BASE (GPDMA1_BASE + 0x06D0UL) +#define GPDMA1_Channel14_BASE (GPDMA1_BASE + 0x0750UL) +#define GPDMA1_Channel15_BASE (GPDMA1_BASE + 0x07D0UL) +#define ADC1_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (AHB1PERIPH_BASE + 0x2300UL) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) +#define ETH_MAC_BASE (ETH_BASE) +#define ADF1_BASE (AHB1PERIPH_BASE + 0xF000UL) +#define ADF1_Filter0_BASE (ADF1_BASE + 0x0080UL) +#define USB_OTG_HS_PERIPH_BASE (AHB1PERIPH_BASE + 0x20000UL) +#define USB_OTG_FS_PERIPH_BASE (AHB1PERIPH_BASE + 0x60000UL) + +/*!< AHB2 peripherals */ +#define PSSI_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define SDMMC2_BASE (AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (AHB2PERIPH_BASE + 0x2800UL) +#define CORDIC_BASE (AHB2PERIPH_BASE + 0x4400UL) + +/*!< AHB3 peripherals */ +#define RNG_BASE AHB3PERIPH_BASE +#define HASH_BASE (AHB3PERIPH_BASE + 0x0400UL) +#define HASH_DIGEST_BASE (AHB3PERIPH_BASE + 0x0710UL) +#define PKA_BASE (AHB3PERIPH_BASE + 0x2000UL) + +/*!< APB5 peripherals */ +#define LTDC_BASE (APB5PERIPH_BASE + 0x1000UL) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x0084UL) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x0104UL) +#define DCMIPP_BASE (APB5PERIPH_BASE + 0x2000UL) +#define GFXTIM_BASE (APB5PERIPH_BASE + 0x4000UL) + +/*!< AHB5 peripherals */ +#define HPDMA1_BASE AHB5PERIPH_BASE +#define HPDMA1_Channel0_BASE (HPDMA1_BASE + 0x0050UL) +#define HPDMA1_Channel1_BASE (HPDMA1_BASE + 0x00D0UL) +#define HPDMA1_Channel2_BASE (HPDMA1_BASE + 0x0150UL) +#define HPDMA1_Channel3_BASE (HPDMA1_BASE + 0x01D0UL) +#define HPDMA1_Channel4_BASE (HPDMA1_BASE + 0x0250UL) +#define HPDMA1_Channel5_BASE (HPDMA1_BASE + 0x02D0UL) +#define HPDMA1_Channel6_BASE (HPDMA1_BASE + 0x0350UL) +#define HPDMA1_Channel7_BASE (HPDMA1_BASE + 0x03D0UL) +#define HPDMA1_Channel8_BASE (HPDMA1_BASE + 0x0450UL) +#define HPDMA1_Channel9_BASE (HPDMA1_BASE + 0x04D0UL) +#define HPDMA1_Channel10_BASE (HPDMA1_BASE + 0x0550UL) +#define HPDMA1_Channel11_BASE (HPDMA1_BASE + 0x05D0UL) +#define HPDMA1_Channel12_BASE (HPDMA1_BASE + 0x0650UL) +#define HPDMA1_Channel13_BASE (HPDMA1_BASE + 0x06D0UL) +#define HPDMA1_Channel14_BASE (HPDMA1_BASE + 0x0750UL) +#define HPDMA1_Channel15_BASE (HPDMA1_BASE + 0x07D0UL) +#define DMA2D_BASE (AHB5PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB5PERIPH_BASE + 0x2000UL) +#define JPEG_BASE (AHB5PERIPH_BASE + 0x3000UL) +#define FMC_R_BASE (AHB5PERIPH_BASE + 0x4000UL) +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) +#define XSPI1_R_BASE (AHB5PERIPH_BASE + 0x5000UL) +#define DLYB_XSPI1_BASE (AHB5PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (AHB5PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (AHB5PERIPH_BASE + 0x8000UL) +#define RAMECC1_BASE (AHB5PERIPH_BASE + 0x9000UL) +#define RAMECC1_Monitor0_BASE (RAMECC1_BASE + 0x20UL) +#define RAMECC1_Monitor1_BASE (RAMECC1_BASE + 0x40UL) +#define RAMECC1_Monitor2_BASE (RAMECC1_BASE + 0x60UL) +#define RAMECC1_Monitor3_BASE (RAMECC1_BASE + 0x80UL) +#define RAMECC1_Monitor4_BASE (RAMECC1_BASE + 0xA0UL) +#define XSPI2_R_BASE (AHB5PERIPH_BASE + 0xA000UL) +#define DLYB_XSPI2_BASE (AHB5PERIPH_BASE + 0xB000UL) +#define XSPIM_BASE (AHB5PERIPH_BASE + 0xB400UL) +#define GFXMMU_BASE (AHB5PERIPH_BASE + 0x010000UL) +#define GPU2D_BASE (AHB5PERIPH_BASE + 0x014000UL) +#define ICACHE_BASE (AHB5PERIPH_BASE + 0x015000UL) + +/*!< APB4 peripherals */ +#define EXTI_BASE APB4PERIPH_BASE +#define SBS_BASE (APB4PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (APB4PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (APB4PERIPH_BASE + 0x1400UL) +#define LPTIM2_BASE (APB4PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (APB4PERIPH_BASE + 0x2800UL) +#define LPTIM4_BASE (APB4PERIPH_BASE + 0x2C00UL) +#define LPTIM5_BASE (APB4PERIPH_BASE + 0x3000UL) +#define VREFBUF_BASE (APB4PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (APB4PERIPH_BASE + 0x4000UL) +#define TAMP_BASE (APB4PERIPH_BASE + 0x4400UL) +#define IWDG_BASE (APB4PERIPH_BASE + 0x4800UL) +#define DTS_BASE (APB4PERIPH_BASE + 0x6800UL) + +/*!< AHB4 peripherals */ +#define GPIOA_BASE AHB4PERIPH_BASE +#define GPIOB_BASE (AHB4PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB4PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB4PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB4PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (AHB4PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (AHB4PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (AHB4PERIPH_BASE + 0x1C00UL) +#define GPIOM_BASE (AHB4PERIPH_BASE + 0x3000UL) +#define GPION_BASE (AHB4PERIPH_BASE + 0x3400UL) +#define GPIOO_BASE (AHB4PERIPH_BASE + 0x3800UL) +#define GPIOP_BASE (AHB4PERIPH_BASE + 0x3C00UL) +#define RCC_BASE (AHB4PERIPH_BASE + 0x4400UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x4800UL) +#define CRC_BASE (AHB4PERIPH_BASE + 0x4C00UL) +#define RAMECC2_BASE (AHB4PERIPH_BASE + 0x7000UL) +#define RAMECC2_Monitor1_BASE (RAMECC2_BASE + 0x40UL) + +/*!< Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +/*!< AXIM registers base address */ +#define AXIM_BASE (0xBFF00000UL) +#define AXIM_ASIB1_BASE (AXIM_BASE + 0x42000UL) +#define AXIM_ASIB2_BASE (AXIM_BASE + 0x43000UL) +#define AXIM_ASIB3_BASE (AXIM_BASE + 0x44000UL) +#define AXIM_ASIB4_BASE (AXIM_BASE + 0x45000UL) +#define AXIM_ASIB5_BASE (AXIM_BASE + 0x46000UL) +#define AXIM_ASIB6_BASE (AXIM_BASE + 0x47000UL) +#define AXIM_ASIB7_BASE (AXIM_BASE + 0x48000UL) +#define AXIM_ASIB8_BASE (AXIM_BASE + 0x49000UL) +#define AXIM_ASIB9_BASE (AXIM_BASE + 0x4A000UL) +#define AXIM_ASIB10_BASE (AXIM_BASE + 0x4B000UL) +#define AXIM_ASIB11_BASE (AXIM_BASE + 0x4C000UL) +#define AXIM_AMIB1_BASE (AXIM_BASE + 0x02000UL) +#define AXIM_AMIB2_BASE (AXIM_BASE + 0x03000UL) +#define AXIM_AMIB3_BASE (AXIM_BASE + 0x04000UL) +#define AXIM_AMIB4_BASE (AXIM_BASE + 0x05000UL) +#define AXIM_AMIB5_BASE (AXIM_BASE + 0x06000UL) +#define AXIM_AMIB6_BASE (AXIM_BASE + 0x07000UL) +#define AXIM_AMIB7_BASE (AXIM_BASE + 0x08000UL) +#define AXIM_AMIB8_BASE (AXIM_BASE + 0x09000UL) +#define AXIM_AMIB9_BASE (AXIM_BASE + 0x0A000UL) +#define AXIM_AMIB10_BASE (AXIM_BASE + 0x0B000UL) + +/*!< Unique device ID register base address */ +#define UID_BASE (0x08FFF800UL) + +/*!< Flash size data register base address */ +#define FLASHSIZE_BASE (0x08FFF80CUL) + +/*!< Package data register base address */ +#define PACKAGE_BASE (0x08FFF80CUL) + +/* USB OTG registers base addresses */ +#define USB_OTG_GLOBAL_BASE (0x0000UL) +#define USB_OTG_DEVICE_BASE (0x0800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x0900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0x0B00UL) +#define USB_OTG_EP_REG_SIZE (0x0020UL) +#define USB_OTG_HOST_BASE (0x0400UL) +#define USB_OTG_HOST_PORT_BASE (0x0440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x0500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x0020UL) +#define USB_OTG_PCGCCTL_BASE (0x0E00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< Root Secure Service Library */ +/************ RSSLIB system Flash region definition constants *************/ +#define RSSLIB_SYS_FLASH_PFUNC_START (0x1FF1FD4CUL) +#define RSSLIB_SYS_FLASH_PFUNC_END (0x1FF1FD78UL) + +/************ RSSLIB function return constants ********************************/ +#define RSSLIB_ERROR (0xF5F5F5F5UL) +#define RSSLIB_SUCCESS (0xEAEAEAEAUL) + +/*!< RSSLIB pointer function structure address definition */ +#define RSSLIB_PFUNC_BASE (0x1FF1FD4CUL) +#define RSSLIB_PFUNC ((RSSLIB_pFunc_TypeDef *)RSSLIB_PFUNC_BASE) + +/** + * @brief Prototype of RSSLIB Jump to HDP level2 Function + * @detail This function increments HDP level up to HDP level 2 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl2_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Prototype of RSSLIB Jump to HDP level3 Function + * @detail This function increments HDP level up to HDP level 3 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl3_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Input parameter definition of RSSLIB_DataProvisioning + */ +typedef struct +{ + uint32_t *pSource; /*!< Address of the Data to be provisioned, shall be in SRAM3 */ + uint32_t Destination; /*!< OBKeys destination information where to provision Data */ + uint32_t Size; /*!< Size in bytes of the Data to be provisioned*/ + uint32_t DoEncryption; /*!< Notifies RSSLIB_DataProvisioning to encrypt or not Data*/ + uint32_t Crc; /*!< CRC over full Data buffer and previous field in the structure*/ +} RSSLIB_DataProvisioningConf_t; + +/** + * @brief Prototype of RSSLIB Data Provisioning Function + * @detail This function write Data within OBKeys sections. + * @param pointer on the structure defining Data to be provisioned and where to + * provision them within OBKeys sections. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_DataProvisioning_TypeDef)(RSSLIB_DataProvisioningConf_t *pConfig); + +/** + * @brief Prototype of RSSLIB Set Secure OB Function + * @detail This function configure a secure OB. + * @param OB address among following values: + * &(FLASH->WRPSRP), &(FLASH->HDPSRP) or &(FLASH->ROTSRP) + * @param OB mask (example 0x000000FF for updating WRP OB). + * @param OB value + * @param OB Pos: bit position of OB value. + * ObValue << ObPos must be aligned on ObMask. + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetSecOB_TypeDef)(uint32_t ObAddr, uint32_t ObMask, uint32_t ObValue, uint32_t ObPos); + +/** + * @brief Prototype of RSSLIB Get RSS Status Function + * @detail This function return RSS Status. + * Calling GetRssStatus is only relevant after calling + * SetSecOB or DataProvisioning. + * @param none. + * @retval RSSLIB_SUCCESS on success, otherwise return an error 0xF5F5xxxx. + */ +typedef uint32_t (*RSSLIB_GetRssStatus_TypeDef)(void); + +/** + * @brief Prototype of RSSLIB Set Product State Function + * @detail This function change Product State. + * @param Requested Product State among following values: + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetProductState_TypeDef)(uint32_t ProductState); + +/** + * @brief Prototype of RSSLIB Get Product State Function + * @detail This function return current Product State. + * @param none. + * @retval RSSLIB_RSS_ERROR on error, + * otherwise return product state among following values: + * 0x39 : Open + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + */ +typedef uint32_t (*RSSLIB_GetProductState_TypeDef)(void); + + +/** + * @brief RSSLib callable function pointer structure + */ +typedef struct +{ + __IM RSSLIB_SetSecOB_TypeDef SetSecOB; + uint32_t RESERVED1[4]; + __IM RSSLIB_GetRssStatus_TypeDef GetRssStatus; + __IM RSSLIB_SetProductState_TypeDef SetProductState; + __IM RSSLIB_DataProvisioning_TypeDef DataProvisioning; + __IM RSSLIB_JumpHDPlvl2_TypeDef JumpHDPLvl2; + __IM RSSLIB_JumpHDPlvl3_TypeDef JumpHDPLvl3; + __IM RSSLIB_GetProductState_TypeDef GetProductState; +} RSSLIB_pFunc_TypeDef; + + +/** @} */ /* End of group STM32H7RSxx_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_Peripheral_declaration + * @{ + */ + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) +#define ADF1 ((MDF_TypeDef *) ADF1_BASE) +#define ADF1_Filter0 ((MDF_Filter_TypeDef *) ADF1_Filter0_BASE) +#define AXIM_AMIB_1 ((AXIM_AMIB_TypeDef *) AXIM_AMIB1_BASE ) +#define AXIM_AMIB_2 ((AXIM_AMIB_TypeDef *) AXIM_AMIB2_BASE ) +#define AXIM_AMIB_3 ((AXIM_AMIB_TypeDef *) AXIM_AMIB3_BASE ) +#define AXIM_AMIB_4 ((AXIM_AMIB_TypeDef *) AXIM_AMIB4_BASE ) +#define AXIM_AMIB_5 ((AXIM_AMIB_TypeDef *) AXIM_AMIB5_BASE ) +#define AXIM_AMIB_6 ((AXIM_AMIB_TypeDef *) AXIM_AMIB6_BASE ) +#define AXIM_AMIB_7 ((AXIM_AMIB_TypeDef *) AXIM_AMIB7_BASE ) +#define AXIM_AMIB_8 ((AXIM_AMIB_TypeDef *) AXIM_AMIB8_BASE ) +#define AXIM_AMIB_9 ((AXIM_AMIB_TypeDef *) AXIM_AMIB9_BASE ) +#define AXIM_AMIB_10 ((AXIM_AMIB_TypeDef *) AXIM_AMIB10_BASE) +#define AXIM_ASIB_1 ((AXIM_ASIB_TypeDef *) AXIM_ASIB1_BASE ) +#define AXIM_ASIB_2 ((AXIM_ASIB_TypeDef *) AXIM_ASIB2_BASE ) +#define AXIM_ASIB_3 ((AXIM_ASIB_TypeDef *) AXIM_ASIB3_BASE ) +#define AXIM_ASIB_4 ((AXIM_ASIB_TypeDef *) AXIM_ASIB4_BASE ) +#define AXIM_ASIB_5 ((AXIM_ASIB_TypeDef *) AXIM_ASIB5_BASE ) +#define AXIM_ASIB_6 ((AXIM_ASIB_TypeDef *) AXIM_ASIB6_BASE ) +#define AXIM_ASIB_7 ((AXIM_ASIB_TypeDef *) AXIM_ASIB7_BASE ) +#define AXIM_ASIB_8 ((AXIM_ASIB_TypeDef *) AXIM_ASIB8_BASE ) +#define AXIM_ASIB_9 ((AXIM_ASIB_TypeDef *) AXIM_ASIB9_BASE ) +#define AXIM_ASIB_10 ((AXIM_ASIB_TypeDef *) AXIM_ASIB10_BASE) +#define AXIM_ASIB_11 ((AXIM_ASIB_TypeDef *) AXIM_ASIB11_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define CORDIC ((CORDIC_TypeDef *) CORDIC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define DCMIPP ((DCMIPP_TypeDef *) DCMIPP_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) +#define DLYB_XSPI1 ((DLYB_TypeDef *) DLYB_XSPI1_BASE) +#define DLYB_XSPI2 ((DLYB_TypeDef *) DLYB_XSPI2_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DTS ((DTS_TypeDef *) DTS_BASE) +#define ETH ((ETH_TypeDef *)ETH_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CONFIG ((FDCAN_Config_TypeDef *) FDCAN_CONFIG_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define GFXTIM ((GFXTIM_TypeDef *) GFXTIM_BASE) +#define GFXMMU ((GFXMMU_TypeDef *) GFXMMU_BASE) +#define GPU2D GPU2D_BASE +#define GPDMA1 ((DMA_TypeDef *) GPDMA1_BASE) +#define GPDMA1_Channel0 ((DMA_Channel_TypeDef *) GPDMA1_Channel0_BASE) +#define GPDMA1_Channel1 ((DMA_Channel_TypeDef *) GPDMA1_Channel1_BASE) +#define GPDMA1_Channel2 ((DMA_Channel_TypeDef *) GPDMA1_Channel2_BASE) +#define GPDMA1_Channel3 ((DMA_Channel_TypeDef *) GPDMA1_Channel3_BASE) +#define GPDMA1_Channel4 ((DMA_Channel_TypeDef *) GPDMA1_Channel4_BASE) +#define GPDMA1_Channel5 ((DMA_Channel_TypeDef *) GPDMA1_Channel5_BASE) +#define GPDMA1_Channel6 ((DMA_Channel_TypeDef *) GPDMA1_Channel6_BASE) +#define GPDMA1_Channel7 ((DMA_Channel_TypeDef *) GPDMA1_Channel7_BASE) +#define GPDMA1_Channel8 ((DMA_Channel_TypeDef *) GPDMA1_Channel8_BASE) +#define GPDMA1_Channel9 ((DMA_Channel_TypeDef *) GPDMA1_Channel9_BASE) +#define GPDMA1_Channel10 ((DMA_Channel_TypeDef *) GPDMA1_Channel10_BASE) +#define GPDMA1_Channel11 ((DMA_Channel_TypeDef *) GPDMA1_Channel11_BASE) +#define GPDMA1_Channel12 ((DMA_Channel_TypeDef *) GPDMA1_Channel12_BASE) +#define GPDMA1_Channel13 ((DMA_Channel_TypeDef *) GPDMA1_Channel13_BASE) +#define GPDMA1_Channel14 ((DMA_Channel_TypeDef *) GPDMA1_Channel14_BASE) +#define GPDMA1_Channel15 ((DMA_Channel_TypeDef *) GPDMA1_Channel15_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) +#define GPION ((GPIO_TypeDef *) GPION_BASE) +#define GPIOO ((GPIO_TypeDef *) GPIOO_BASE) +#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define HPDMA1 ((DMA_TypeDef *) HPDMA1_BASE) +#define HPDMA1_Channel0 ((DMA_Channel_TypeDef *) HPDMA1_Channel0_BASE) +#define HPDMA1_Channel1 ((DMA_Channel_TypeDef *) HPDMA1_Channel1_BASE) +#define HPDMA1_Channel2 ((DMA_Channel_TypeDef *) HPDMA1_Channel2_BASE) +#define HPDMA1_Channel3 ((DMA_Channel_TypeDef *) HPDMA1_Channel3_BASE) +#define HPDMA1_Channel4 ((DMA_Channel_TypeDef *) HPDMA1_Channel4_BASE) +#define HPDMA1_Channel5 ((DMA_Channel_TypeDef *) HPDMA1_Channel5_BASE) +#define HPDMA1_Channel6 ((DMA_Channel_TypeDef *) HPDMA1_Channel6_BASE) +#define HPDMA1_Channel7 ((DMA_Channel_TypeDef *) HPDMA1_Channel7_BASE) +#define HPDMA1_Channel8 ((DMA_Channel_TypeDef *) HPDMA1_Channel8_BASE) +#define HPDMA1_Channel9 ((DMA_Channel_TypeDef *) HPDMA1_Channel9_BASE) +#define HPDMA1_Channel10 ((DMA_Channel_TypeDef *) HPDMA1_Channel10_BASE) +#define HPDMA1_Channel11 ((DMA_Channel_TypeDef *) HPDMA1_Channel11_BASE) +#define HPDMA1_Channel12 ((DMA_Channel_TypeDef *) HPDMA1_Channel12_BASE) +#define HPDMA1_Channel13 ((DMA_Channel_TypeDef *) HPDMA1_Channel13_BASE) +#define HPDMA1_Channel14 ((DMA_Channel_TypeDef *) HPDMA1_Channel14_BASE) +#define HPDMA1_Channel15 ((DMA_Channel_TypeDef *) HPDMA1_Channel15_BASE) +#define ICACHE ((ICACHE_TypeDef *) ICACHE_BASE) +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I3C1 ((I3C_TypeDef *) I3C1_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define LPTIM4 ((LPTIM_TypeDef *) LPTIM4_BASE) +#define LPTIM5 ((LPTIM_TypeDef *) LPTIM5_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define PSSI ((PSSI_TypeDef *) PSSI_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RAMECC1 ((RAMECC_TypeDef *)RAMECC1_BASE) +#define RAMECC2 ((RAMECC_TypeDef *)RAMECC2_BASE) +#define RAMECC1_Monitor0 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor0_BASE) +#define RAMECC1_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor1_BASE) +#define RAMECC1_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor2_BASE) +#define RAMECC1_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor3_BASE) +#define RAMECC1_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor4_BASE) +#define RAMECC2_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor1_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *) SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *) SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *) SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *) SAI2_Block_B_BASE) +#define SBS ((SBS_TypeDef *) SBS_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define XSPI1 ((XSPI_TypeDef *) XSPI1_R_BASE) +#define XSPI2 ((XSPI_TypeDef *) XSPI2_R_BASE) +#define XSPIM ((XSPIM_TypeDef *) XSPIM_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) + +/** @} */ /* End of group STM32H7RSxx_Peripheral_declaration */ + +/** @addtogroup STM32H7RSxx_Peripheral_Exported_constants + * @{ + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Registers_Bits_Definition + * @{ + */ +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G4 series) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_ADFCFG_Pos (2U) +#define ADC_CFGR_ADFCFG_Msk (0x1UL << ADC_CFGR_ADFCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_ADFCFG ADC_CFGR_ADFCFG_Msk /*!< ADC ADF transfer configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR_ALIGN_Pos (15U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00008000 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +#define ADC_CFGR2_SWTRIG_Pos (25U) +#define ADC_CFGR2_SWTRIG_Msk (0x1UL << ADC_CFGR2_SWTRIG_Pos) /*!< 0x02000000 */ +#define ADC_CFGR2_SWTRIG ADC_CFGR2_SWTRIG_Msk /*!< ADC Software Trigger Bit for Sample time control trigger mode */ +#define ADC_CFGR2_BULB_Pos (26U) +#define ADC_CFGR2_BULB_Msk (0x1UL << ADC_CFGR2_BULB_Pos) /*!< 0x04000000 */ +#define ADC_CFGR2_BULB ADC_CFGR2_BULB_Msk /*!< ADC Bulb sampling mode */ +#define ADC_CFGR2_SMPTRIG_Pos (27U) +#define ADC_CFGR2_SMPTRIG_Msk (0x1UL << ADC_CFGR2_SMPTRIG_Pos) /*!< 0x08000000 */ +#define ADC_CFGR2_SMPTRIG ADC_CFGR2_SMPTRIG_Msk /*!< ADC Sample Time Control Trigger mode */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ + +#define ADC_TR1_AWDFILT_Pos (12U) +#define ADC_TR1_AWDFILT_Msk (0x7UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00007000 */ +#define ADC_TR1_AWDFILT ADC_TR1_AWDFILT_Msk /*!< ADC analog watchdog filtering parameter */ +#define ADC_TR1_AWDFILT_0 (0x1UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00001000 */ +#define ADC_TR1_AWDFILT_1 (0x2UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00002000 */ +#define ADC_TR1_AWDFILT_2 (0x4UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00004000 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL<< ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ + +#define ADC_OFR1_OFFSETPOS_Pos (24U) +#define ADC_OFR1_OFFSETPOS_Msk (0x1UL << ADC_OFR1_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSETPOS ADC_OFR1_OFFSETPOS_Msk /*!< ADC offset number 1 positive */ +#define ADC_OFR1_SATEN_Pos (25U) +#define ADC_OFR1_SATEN_Msk (0x1UL << ADC_OFR1_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR1_SATEN ADC_OFR1_SATEN_Msk /*!< ADC offset number 1 saturation enable */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ + +#define ADC_OFR2_OFFSETPOS_Pos (24U) +#define ADC_OFR2_OFFSETPOS_Msk (0x1UL << ADC_OFR2_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSETPOS ADC_OFR2_OFFSETPOS_Msk /*!< ADC offset number 2 positive */ +#define ADC_OFR2_SATEN_Pos (25U) +#define ADC_OFR2_SATEN_Msk (0x1UL << ADC_OFR2_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR2_SATEN ADC_OFR2_SATEN_Msk /*!< ADC offset number 2 saturation enable */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ + +#define ADC_OFR3_OFFSETPOS_Pos (24U) +#define ADC_OFR3_OFFSETPOS_Msk (0x1UL << ADC_OFR3_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSETPOS ADC_OFR3_OFFSETPOS_Msk /*!< ADC offset number 3 positive */ +#define ADC_OFR3_SATEN_Pos (25U) +#define ADC_OFR3_SATEN_Msk (0x1UL << ADC_OFR3_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR3_SATEN ADC_OFR3_SATEN_Msk /*!< ADC offset number 3 saturation enable */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ + +#define ADC_OFR4_OFFSETPOS_Pos (24U) +#define ADC_OFR4_OFFSETPOS_Msk (0x1UL << ADC_OFR4_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSETPOS ADC_OFR4_OFFSETPOS_Msk /*!< ADC offset number 4 positive */ +#define ADC_OFR4_SATEN_Pos (25U) +#define ADC_OFR4_SATEN_Msk (0x1UL << ADC_OFR4_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR4_SATEN ADC_OFR4_SATEN_Msk /*!< ADC offset number 4 saturation enable */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000030 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00300000 */ + +/******************** Bit definition for ADC_OR register ***************/ +#define ADC_OR_OP0_Pos (0U) +#define ADC_OR_OP0_Msk (0x1UL << ADC_OR_OP0_Pos) /*!< 0x00000001 */ +#define ADC_OR_OP0 ADC_OR_OP0_Msk /*!< ADC internal path to VDDCORE */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register *******************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ + +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ + +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************************************************************************/ +/* */ +/* AXIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AXIM_ASIB_FNMOD2 register **********/ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_ASIB_READQOS register ********/ +#define AXIM_ASIB_READQOS_AR_QOS_Pos (0U) +#define AXIM_ASIB_READQOS_AR_QOS_Msk (0xFUL << AXIM_ASIB_READQOS_AR_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_READQOS_AR_QOS AXIM_ASIB_READQOS_AR_QOS_Msk /*!< Read channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_WRITEQOS register *******/ +#define AXIM_ASIB_WRITEQOS_AW_QOS_Pos (0U) +#define AXIM_ASIB_WRITEQOS_AW_QOS_Msk (0xFUL << AXIM_ASIB_WRITEQOS_AW_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_WRITEQOS_AW_QOS AXIM_ASIB_WRITEQOS_AW_QOS_Msk /*!< Write channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_FNMOD register **********/ +#define AXIM_ASIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_ASIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD_READ_ISS AXIM_ASIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_ASIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS AXIM_ASIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMODBMISS register **********/ +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODBMISS_READ_ISS AXIM_AMIB_FNMODBMISS_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMOD2 register **********/ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_AMIB_FNMODLB register **********/ +#define AXIM_AMIB_FNMODLB_LONG_BURST_Pos (0U) +#define AXIM_AMIB_FNMODLB_LONG_BURST_Msk (0x1UL << AXIM_AMIB_FNMODLB_LONG_BURST_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODLB_LONG_BURST AXIM_AMIB_FNMODLB_LONG_BURST_Msk /*!< Long bursts can be generated */ + +/******************* Bit definition for AXIM_AMIB_FNMOD register **********/ +#define AXIM_AMIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD_READ_ISS AXIM_AMIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS AXIM_AMIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE ((0x16C8UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT ((0x14B8UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process protected exponentiation*/ +#define PKA_MODULAR_EXP_PROTECT_IN_MODULUS ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus to process protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_PHI ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input phi to process protected exponentiation */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_ERROR ((0x1298UL - PKA_RAM_OFFSET)>>2) /*!< Output error of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input curve prime order n number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input prime order n */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_POINT_CHECK_IN_MONTGOMERY_PARAM ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0x0FE8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0x0F28UL - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0x0FE0UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x1400UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1458UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x0468UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x04D0UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x0678UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x06D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0x12F8UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0x1350UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x10E0UL - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0x13A8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x0948UL - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x0B60UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xE78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic subtraction input data */ +#define PKA_ARITHMETIC_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic subtraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular subtraction input data */ +#define PKA_MODULAR_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular subtraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result for arithmetic operations */ + +/* Compute ECC complete addition input data */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC complete addition output data */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Output result Z coordinate */ + +/* Compute ECC double base ladder input data */ +#define PKA_ECC_DOUBLE_LADDER_IN_PRIME_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input 'm' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC double base ladder output data */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_ERROR ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Compute ECC projective to affine conversion input data */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P X coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Y coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Z coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2 ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Compute ECC projective to affine conversion output data */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result x affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result y affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + + +/******************************************************************************/ +/* */ +/* Parallel Synchronous Slave Interface (PSSI ) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PSSI_CR register *******************/ +#define PSSI_CR_CKPOL_Pos (5U) +#define PSSI_CR_CKPOL_Msk (0x1UL << PSSI_CR_CKPOL_Pos) /*!< 0x00000020 */ +#define PSSI_CR_CKPOL PSSI_CR_CKPOL_Msk /*!< Parallel data clock polarity */ +#define PSSI_CR_DEPOL_Pos (6U) +#define PSSI_CR_DEPOL_Msk (0x1UL << PSSI_CR_DEPOL_Pos) /*!< 0x00000040 */ +#define PSSI_CR_DEPOL PSSI_CR_DEPOL_Msk /*!< Data enable polarity */ +#define PSSI_CR_RDYPOL_Pos (8U) +#define PSSI_CR_RDYPOL_Msk (0x1UL << PSSI_CR_RDYPOL_Pos) /*!< 0x00000100 */ +#define PSSI_CR_RDYPOL PSSI_CR_RDYPOL_Msk /*!< Ready polarity */ +#define PSSI_CR_EDM_Pos (10U) +#define PSSI_CR_EDM_Msk (0x3UL << PSSI_CR_EDM_Pos) /*!< 0x00000C00 */ +#define PSSI_CR_EDM PSSI_CR_EDM_Msk /*!< Extended data mode */ +#define PSSI_CR_ENABLE_Pos (14U) +#define PSSI_CR_ENABLE_Msk (0x1UL << PSSI_CR_ENABLE_Pos) /*!< 0x00004000 */ +#define PSSI_CR_ENABLE PSSI_CR_ENABLE_Msk /*!< PSSI enable */ +#define PSSI_CR_DERDYCFG_Pos (18U) +#define PSSI_CR_DERDYCFG_Msk (0x7UL << PSSI_CR_DERDYCFG_Pos) /*!< 0x001C0000 */ +#define PSSI_CR_DERDYCFG PSSI_CR_DERDYCFG_Msk /*!< Data enable and ready configuration */ +#define PSSI_CR_CKSRC_Pos (29U) +#define PSSI_CR_CKSRC_Msk (0x1UL << PSSI_CR_CKSRC_Pos) /*!< 0x20000000 */ +#define PSSI_CR_CKSRC PSSI_CR_CKSRC_Msk /*!< Clock source */ +#define PSSI_CR_DMAEN_Pos (30U) +#define PSSI_CR_DMAEN_Msk (0x1UL << PSSI_CR_DMAEN_Pos) /*!< 0x40000000 */ +#define PSSI_CR_DMAEN PSSI_CR_DMAEN_Msk /*!< DMA enable */ +#define PSSI_CR_OUTEN_Pos (31U) +#define PSSI_CR_OUTEN_Msk (0x1UL << PSSI_CR_OUTEN_Pos) /*!< 0x80000000 */ +#define PSSI_CR_OUTEN PSSI_CR_OUTEN_Msk /*!< Data direction selection */ + +/******************** Bit definition for PSSI_SR register *******************/ +#define PSSI_SR_RTT4B_Pos (2U) +#define PSSI_SR_RTT4B_Msk (0x1UL << PSSI_SR_RTT4B_Pos) /*!< 0x00000004 */ +#define PSSI_SR_RTT4B PSSI_SR_RTT4B_Msk /*!< Ready to transfer four bytes */ +#define PSSI_SR_RTT1B_Pos (3U) +#define PSSI_SR_RTT1B_Msk (0x1UL << PSSI_SR_RTT1B_Pos) /*!< 0x00000008 */ +#define PSSI_SR_RTT1B PSSI_SR_RTT1B_Msk /*!< Ready to transfer one byte */ + +/******************** Bit definition for PSSI_RIS register ******************/ +#define PSSI_RIS_OVR_RIS_Pos (1U) +#define PSSI_RIS_OVR_RIS_Msk (0x1UL << PSSI_RIS_OVR_RIS_Pos) /*!< 0x00000002 */ +#define PSSI_RIS_OVR_RIS PSSI_RIS_OVR_RIS_Msk /*!< Data buffer overrun/underrun raw interrupt status */ + +/******************** Bit definition for PSSI_IER register ******************/ +#define PSSI_IER_OVR_IE_Pos (1U) +#define PSSI_IER_OVR_IE_Msk (0x1UL << PSSI_IER_OVR_IE_Pos) /*!< 0x00000002 */ +#define PSSI_IER_OVR_IE PSSI_IER_OVR_IE_Msk /*!< Data buffer overrun/underrun interrupt enable */ + +/******************** Bit definition for PSSI_MIS register ******************/ +#define PSSI_MIS_OVR_MIS_Pos (1U) +#define PSSI_MIS_OVR_MIS_Msk (0x1UL << PSSI_MIS_OVR_MIS_Pos) /*!< 0x00000002 */ +#define PSSI_MIS_OVR_MIS PSSI_MIS_OVR_MIS_Msk /*!< Data buffer overrun/underrun masked interrupt status */ + +/******************** Bit definition for PSSI_ICR register ******************/ +#define PSSI_ICR_OVR_ISC_Pos (1U) +#define PSSI_ICR_OVR_ISC_Msk (0x1UL << PSSI_ICR_OVR_ISC_Pos) /*!< 0x00000002 */ +#define PSSI_ICR_OVR_ISC PSSI_ICR_OVR_ISC_Msk /*!< Data buffer overrun/underrun interrupt status clear */ + +/******************** Bit definition for PSSI_DR register *******************/ +#define PSSI_DR_DR_Pos (0U) +#define PSSI_DR_DR_Msk (0xFFFFFFFFUL << PSSI_DR_DR_Pos) /*!< 0xFFFFFFF */ +#define PSSI_DR_DR PSSI_DR_DR_Msk /*!< Data register */ + + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PWR_CR1 register *******************/ +#define PWR_CR1_SVOS_Pos (0U) +#define PWR_CR1_SVOS_Msk (0x1UL << PWR_CR1_SVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_SVOS PWR_CR1_SVOS_Msk /*!< System STOP mode Voltage Scaling selection. */ + +#define PWR_CR1_PVDE_Pos (4U) +#define PWR_CR1_PVDE_Msk (0x1UL << PWR_CR1_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR1_PVDE PWR_CR1_PVDE_Msk /*!< Programmable Voltage detector enable. */ + +#define PWR_CR1_PLS_Pos (5U) +#define PWR_CR1_PLS_Msk (0x7UL << PWR_CR1_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR1_PLS PWR_CR1_PLS_Msk /*!< Programmable Voltage Detector level selection */ +#define PWR_CR1_PLS_0 (0x1UL << PWR_CR1_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_PLS_1 (0x2UL << PWR_CR1_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR1_PLS_2 (0x4UL << PWR_CR1_PLS_Pos) /*!< 0x00000080 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Back-up domain Protection */ + +#define PWR_CR1_FLPS_Pos (9U) +#define PWR_CR1_FLPS_Msk (0x1UL << PWR_CR1_FLPS_Pos) /*!< 0x00000200 */ +#define PWR_CR1_FLPS PWR_CR1_FLPS_Msk /*!< Flash low power mode in STOP */ + +#define PWR_CR1_BOOSTE_Pos (11U) +#define PWR_CR1_BOOSTE_Msk (0x1UL << PWR_CR1_BOOSTE_Pos) /*!< 0x00000800 */ +#define PWR_CR1_BOOSTE PWR_CR1_BOOSTE_Msk /*!< Analog Switch VBoost control. */ + +#define PWR_CR1_AVDREADY_Pos (12) +#define PWR_CR1_AVDREADY_Msk (0x1UL << PWR_CR1_AVDREADY_Pos) /*!< 0x00001000 */ +#define PWR_CR1_AVDREADY PWR_CR1_AVDREADY_Msk /*!< Analog Voltage Ready. */ + +#define PWR_CR1_AVDEN_Pos (13U) +#define PWR_CR1_AVDEN_Msk (0x1UL << PWR_CR1_AVDEN_Pos) /*!< 0x00002000 */ +#define PWR_CR1_AVDEN PWR_CR1_AVDEN_Msk /*!< Analog Voltage Detector Enable */ + +#define PWR_CR1_ALS_Pos (14U) +#define PWR_CR1_ALS_Msk (0x3UL << PWR_CR1_ALS_Pos) /*!< 0x0000A000 */ +#define PWR_CR1_ALS PWR_CR1_ALS_Msk /*!< Analog Voltage Detector level selection */ +#define PWR_CR1_ALS_0 (0x1UL << PWR_CR1_ALS_Pos) /*!< 0x00004000 */ +#define PWR_CR1_ALS_1 (0x2UL << PWR_CR1_ALS_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_ACTVOS_Pos (0U) +#define PWR_SR1_ACTVOS_Msk (0x1UL << PWR_SR1_ACTVOS_Pos) /*!< 0x00000001 */ +#define PWR_SR1_ACTVOS PWR_SR1_ACTVOS_Msk /*!< VOS currently applied for VCORE voltage scaling selection */ + +#define PWR_SR1_ACTVOSRDY_Pos (1U) +#define PWR_SR1_ACTVOSRDY_Msk (0x1UL << PWR_SR1_ACTVOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_SR1_ACTVOSRDY PWR_SR1_ACTVOSRDY_Msk /*!< Ready bit for current actual used VOS for VDD11 Voltage Scaling */ + +#define PWR_SR1_PVDO_Pos (4U) +#define PWR_SR1_PVDO_Msk (0x1UL << PWR_SR1_PVDO_Pos) /*!< 0x00000010 */ +#define PWR_SR1_PVDO PWR_SR1_PVDO_Msk /*!< Programmable Voltage Detect Output */ + +#define PWR_SR1_AVDO_Pos (13U) +#define PWR_SR1_AVDO_Msk (0x1UL << PWR_SR1_AVDO_Pos) /*!< 0x00002000 */ +#define PWR_SR1_AVDO PWR_SR1_AVDO_Msk /*!< Analog Voltage Detect Output on VDDA */ + +/******************** Bit definition for PWR_CSR1 register ********************/ +#define PWR_CSR1_BREN_Pos (0U) +#define PWR_CSR1_BREN_Msk (0x1UL << PWR_CSR1_BREN_Pos) /*!< 0x00000001 */ +#define PWR_CSR1_BREN PWR_CSR1_BREN_Msk /*!< Backup regulator enable */ + +#define PWR_CSR1_MONEN_Pos (4U) +#define PWR_CSR1_MONEN_Msk (0x1UL << PWR_CSR1_MONEN_Pos) /*!< 0x00000010 */ +#define PWR_CSR1_MONEN PWR_CSR1_MONEN_Msk /*!< VBAT and temperature monitoring enable */ + +#define PWR_CSR1_BRRDY_Pos (16U) +#define PWR_CSR1_BRRDY_Msk (0x1UL << PWR_CSR1_BRRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR1_BRRDY PWR_CSR1_BRRDY_Msk /*!< Backup regulator ready */ + +#define PWR_CSR1_VBATL_Pos (20U) +#define PWR_CSR1_VBATL_Msk (0x1UL << PWR_CSR1_VBATL_Pos) /*!< 0x00100000 */ +#define PWR_CSR1_VBATL PWR_CSR1_VBATL_Msk /*!< Monitored VBAT level above low threshold */ + +#define PWR_CSR1_VBATH_Pos (21U) +#define PWR_CSR1_VBATH_Msk (0x1UL << PWR_CSR1_VBATH_Pos) /*!< 0x00200000 */ +#define PWR_CSR1_VBATH PWR_CSR1_VBATH_Msk /*!< Monitored VBAT level above high threshold */ + +#define PWR_CSR1_TEMPL_Pos (22U) +#define PWR_CSR1_TEMPL_Msk (0x1UL << PWR_CSR1_TEMPL_Pos) /*!< 0x00400000 */ +#define PWR_CSR1_TEMPL PWR_CSR1_TEMPL_Msk /*!< Monitored temperature level above low threshold */ + +#define PWR_CSR1_TEMPH_Pos (23U) +#define PWR_CSR1_TEMPH_Msk (0x1UL << PWR_CSR1_TEMPH_Pos) /*!< 0x00800000 */ +#define PWR_CSR1_TEMPH PWR_CSR1_TEMPH_Msk /*!< Monitored temperature level above high threshold */ + +/******************** Bit definition for PWR_CSR2 register ********************/ +#define PWR_CSR2_BYPASS_Pos (0U) +#define PWR_CSR2_BYPASS_Msk (0x1UL << PWR_CSR2_BYPASS_Pos) /*!< 0x00000001 */ +#define PWR_CSR2_BYPASS PWR_CSR2_BYPASS_Msk /*!< Power Management Unit bypass */ + +#define PWR_CSR2_LDOEN_Pos (1U) +#define PWR_CSR2_LDOEN_Msk (0x1UL << PWR_CSR2_LDOEN_Pos) /*!< 0x00000002 */ +#define PWR_CSR2_LDOEN PWR_CSR2_LDOEN_Msk /*!< Low Drop-Out regulator enable */ + +#define PWR_CSR2_SDEN_Pos (2U) +#define PWR_CSR2_SDEN_Msk (0x1UL << PWR_CSR2_SDEN_Pos) /*!< 0x00000004 */ +#define PWR_CSR2_SDEN PWR_CSR2_SDEN_Msk /*!< SMPS Step-down converter enable */ + +#define PWR_CSR2_SMPSEXTHP_Pos (3U) +#define PWR_CSR2_SMPSEXTHP_Msk (0x1UL << PWR_CSR2_SMPSEXTHP_Pos) /*!< 0x00000008 */ +#define PWR_CSR2_SMPSEXTHP PWR_CSR2_SMPSEXTHP_Msk /*!< SMPS external power delivery selection */ + +#define PWR_CSR2_SDHILEVEL_Pos (4U) +#define PWR_CSR2_SDHILEVEL_Msk (0x1UL << PWR_CSR2_SDHILEVEL_Pos) /*!< 0x00000030 */ +#define PWR_CSR2_SDHILEVEL PWR_CSR2_SDHILEVEL_Msk /*!< SMPS step-down converter voltage output for LDO or external supply */ + +#define PWR_CSR2_VBE_Pos (8U) +#define PWR_CSR2_VBE_Msk (0x1UL << PWR_CSR2_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CSR2_VBE PWR_CSR2_VBE_Msk /*!< VBAT charging enable */ + +#define PWR_CSR2_VBRS_Pos (9U) +#define PWR_CSR2_VBRS_Msk (0x1UL << PWR_CSR2_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CSR2_VBRS PWR_CSR2_VBRS_Msk /*!< VBAT charging resistor selection */ + +#define PWR_CSR2_XSPICAP1_Pos (10U) +#define PWR_CSR2_XSPICAP1_Msk (0x3UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000C00 */ +#define PWR_CSR2_XSPICAP1 PWR_CSR2_XSPICAP1_Msk /*!< XSPI port 1 capacitor control bits */ +#define PWR_CSR2_XSPICAP1_0 (0x1UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000400 */ +#define PWR_CSR2_XSPICAP1_1 (0x2UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000800 */ + +#define PWR_CSR2_XSPICAP2_Pos (12U) +#define PWR_CSR2_XSPICAP2_Msk (0x3UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00003000 */ +#define PWR_CSR2_XSPICAP2 PWR_CSR2_XSPICAP2_Msk /*!< XSPI port 2 capacitor control bits */ +#define PWR_CSR2_XSPICAP2_0 (0x1UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00001000 */ +#define PWR_CSR2_XSPICAP2_1 (0x2UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00002000 */ + +#define PWR_CSR2_EN_XSPIM1_Pos (14U) +#define PWR_CSR2_EN_XSPIM1_Msk (0x1UL << PWR_CSR2_EN_XSPIM1_Pos) /*!< 0x00004000 */ +#define PWR_CSR2_EN_XSPIM1 PWR_CSR2_EN_XSPIM1_Msk /*!< XSPIM1 external supply enable */ + +#define PWR_CSR2_EN_XSPIM2_Pos (15U) +#define PWR_CSR2_EN_XSPIM2_Msk (0x1UL << PWR_CSR2_EN_XSPIM2_Pos) /*!< 0x00008000 */ +#define PWR_CSR2_EN_XSPIM2 PWR_CSR2_EN_XSPIM2_Msk /*!< XSPIM2 external supply enable */ + +#define PWR_CSR2_SDEXTRDY_Pos (16U) +#define PWR_CSR2_SDEXTRDY_Msk (0x1UL << PWR_CSR2_SDEXTRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR2_SDEXTRDY PWR_CSR2_SDEXTRDY_Msk /*!< SMPS External supply ready */ + +#define PWR_CSR2_USB33DEN_Pos (24U) +#define PWR_CSR2_USB33DEN_Msk (0x1UL << PWR_CSR2_USB33DEN_Pos) /*!< 0x01000000 */ +#define PWR_CSR2_USB33DEN PWR_CSR2_USB33DEN_Msk /*!< VDD33_USB voltage level detector enable */ + +#define PWR_CSR2_USBREGEN_Pos (25U) +#define PWR_CSR2_USBREGEN_Msk (0x1UL << PWR_CSR2_USBREGEN_Pos) /*!< 0x02000000 */ +#define PWR_CSR2_USBREGEN PWR_CSR2_USBREGEN_Msk /*!< USB regulator enable */ + +#define PWR_CSR2_USB33RDY_Pos (26U) +#define PWR_CSR2_USB33RDY_Msk (0x1UL << PWR_CSR2_USB33RDY_Pos) /*!< 0x04000000 */ +#define PWR_CSR2_USB33RDY PWR_CSR2_USB33RDY_Msk /*!< USB supply ready */ + +#define PWR_CSR2_USBHSREGEN_Pos (27U) +#define PWR_CSR2_USBHSREGEN_Msk (0x1UL << PWR_CSR2_USBHSREGEN_Pos) /*!< 0x08000000 */ +#define PWR_CSR2_USBHSREGEN PWR_CSR2_USBHSREGEN_Msk /*!< USB HS regulator enable */ + +/******************** Bit definition for PWR_CSR3 register ********************/ +#define PWR_CSR3_PDDS_Pos (0U) +#define PWR_CSR3_PDDS_Msk (0x1UL << PWR_CSR3_PDDS_Pos) /*!< 0x00000001 */ +#define PWR_CSR3_PDDS PWR_CSR3_PDDS_Msk /*!< D1 domain Power Down Deepsleep */ + +#define PWR_CSR3_CSSF_Pos (1U) +#define PWR_CSR3_CSSF_Msk (0x1UL << PWR_CSR3_CSSF_Pos) /*!< 0x00000002 */ +#define PWR_CSR3_CSSF PWR_CSR3_CSSF_Msk /*!< Clear Standby and Stop flag */ + +#define PWR_CSR3_STOPF_Pos (8U) +#define PWR_CSR3_STOPF_Msk (0x1UL << PWR_CSR3_STOPF_Pos) /*!< 0x00000080 */ +#define PWR_CSR3_STOPF PWR_CSR3_STOPF_Msk /*!< STOP Flag */ + +#define PWR_CSR3_SBF_Pos (9U) +#define PWR_CSR3_SBF_Msk (0x1UL << PWR_CSR3_SBF_Pos) /*!< 0x00000100 */ +#define PWR_CSR3_SBF PWR_CSR3_SBF_Msk /*!< System STANDBY Flag */ + +/******************** Bit definition for PWR_CSR4 register ********************/ +#define PWR_CSR4_VOS_Pos (0U) +#define PWR_CSR4_VOS_Msk (0x1UL << PWR_CSR4_VOS_Pos) /*!< 0x00000001 */ +#define PWR_CSR4_VOS PWR_CSR4_VOS_Msk /*!< Voltage Scaling selection according performance */ + +#define PWR_CSR4_VOSRDY_Pos (1U) +#define PWR_CSR4_VOSRDY_Msk (0x1UL << PWR_CSR4_VOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_CSR4_VOSRDY PWR_CSR4_VOSRDY_Msk /*!< VOSRDY: VOS Ready bit for VCORE voltage scaling output selection. */ + +/******************** Bit definition for PWR_WKUPCR register ********************/ +#define PWR_WKUPCR_WKUPC_Pos (0U) +#define PWR_WKUPCR_WKUPC_Msk (0xFUL << PWR_WKUPCR_WKUPC_Pos) /*!< 0x0000000F */ +#define PWR_WKUPCR_WKUPC PWR_WKUPCR_WKUPC_Msk /*!< Clear Wakeup Pin Flag 1 to 4 */ +#define PWR_WKUPCR_WKUPC1_Pos (0U) +#define PWR_WKUPCR_WKUPC1_Msk (0x1UL << PWR_WKUPCR_WKUPC1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1_Msk /*!< Clear Wakeup Pin Flag 1 */ +#define PWR_WKUPCR_WKUPC2_Pos (1U) +#define PWR_WKUPCR_WKUPC2_Msk (0x1UL << PWR_WKUPCR_WKUPC2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2_Msk /*!< Clear Wakeup Pin Flag 2 */ +#define PWR_WKUPCR_WKUPC3_Pos (2U) +#define PWR_WKUPCR_WKUPC3_Msk (0x1UL << PWR_WKUPCR_WKUPC3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3_Msk /*!< Clear Wakeup Pin Flag 3 */ +#define PWR_WKUPCR_WKUPC4_Pos (3U) +#define PWR_WKUPCR_WKUPC4_Msk (0x1UL << PWR_WKUPCR_WKUPC4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4_Msk /*!< Clear Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPFR register ********************/ +#define PWR_WKUPFR_WKUPF1_Pos (0U) +#define PWR_WKUPFR_WKUPF1_Msk (0x1UL << PWR_WKUPFR_WKUPF1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1_Msk /*!< Wakeup Pin Flag 1 */ +#define PWR_WKUPFR_WKUPF2_Pos (1U) +#define PWR_WKUPFR_WKUPF2_Msk (0x1UL << PWR_WKUPFR_WKUPF2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2_Msk /*!< Wakeup Pin Flag 2 */ +#define PWR_WKUPFR_WKUPF3_Pos (2U) +#define PWR_WKUPFR_WKUPF3_Msk (0x1UL << PWR_WKUPFR_WKUPF3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3_Msk /*!< Wakeup Pin Flag 3 */ +#define PWR_WKUPFR_WKUPF4_Pos (3U) +#define PWR_WKUPFR_WKUPF4_Msk (0x1UL << PWR_WKUPFR_WKUPF4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4_Msk /*!< Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPEPR register ********************/ +#define PWR_WKUPEPR_WKUPEN_Pos (0U) +#define PWR_WKUPEPR_WKUPEN_Msk (0x0FUL << PWR_WKUPEPR_WKUPEN_Pos) /*!< 0x0000000F */ +#define PWR_WKUPEPR_WKUPEN PWR_WKUPEPR_WKUPEN_Msk /*!< Enable all Wakeup Pin */ +#define PWR_WKUPEPR_WKUPEN1_Pos (0U) +#define PWR_WKUPEPR_WKUPEN1_Msk (0x1UL << PWR_WKUPEPR_WKUPEN1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPEPR_WKUPEN1 PWR_WKUPEPR_WKUPEN1_Msk /*!< Enable Wakeup Pin WKUP1 */ +#define PWR_WKUPEPR_WKUPEN2_Pos (1U) +#define PWR_WKUPEPR_WKUPEN2_Msk (0x1UL << PWR_WKUPEPR_WKUPEN2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPEPR_WKUPEN2 PWR_WKUPEPR_WKUPEN2_Msk /*!< Enable Wakeup Pin WKUP2 */ +#define PWR_WKUPEPR_WKUPEN3_Pos (2U) +#define PWR_WKUPEPR_WKUPEN3_Msk (0x1UL << PWR_WKUPEPR_WKUPEN3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPEPR_WKUPEN3 PWR_WKUPEPR_WKUPEN3_Msk /*!< Enable Wakeup Pin WKUP3 */ +#define PWR_WKUPEPR_WKUPEN4_Pos (3U) +#define PWR_WKUPEPR_WKUPEN4_Msk (0x1UL << PWR_WKUPEPR_WKUPEN4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPEPR_WKUPEN4 PWR_WKUPEPR_WKUPEN4_Msk /*!< Enable Wakeup Pin WKUP4 */ + +#define PWR_WKUPEPR_WKUPP_Pos (8U) +#define PWR_WKUPEPR_WKUPP_Msk (0x0FUL << PWR_WKUPEPR_WKUPP_Pos) /*!< 0x0000F00 */ +#define PWR_WKUPEPR_WKUPP PWR_WKUPEPR_WKUPP_Msk /*!< Wakeup Pin Polarity for WKUP1 to WKUP4 */ +#define PWR_WKUPEPR_WKUPP1_Pos (8U) +#define PWR_WKUPEPR_WKUPP1_Msk (0x1UL << PWR_WKUPEPR_WKUPP1_Pos) /*!< 0x00000100 */ +#define PWR_WKUPEPR_WKUPP1 PWR_WKUPEPR_WKUPP1_Msk /*!< Wakeup Pin Polarity for WKUP1 */ +#define PWR_WKUPEPR_WKUPP2_Pos (9U) +#define PWR_WKUPEPR_WKUPP2_Msk (0x1UL << PWR_WKUPEPR_WKUPP2_Pos) /*!< 0x00000200 */ +#define PWR_WKUPEPR_WKUPP2 PWR_WKUPEPR_WKUPP2_Msk /*!< Wakeup Pin Polarity for WKUP2 */ +#define PWR_WKUPEPR_WKUPP3_Pos (10U) +#define PWR_WKUPEPR_WKUPP3_Msk (0x1UL << PWR_WKUPEPR_WKUPP3_Pos) /*!< 0x00000400 */ +#define PWR_WKUPEPR_WKUPP3 PWR_WKUPEPR_WKUPP3_Msk /*!< Wakeup Pin Polarity for WKUP3 */ +#define PWR_WKUPEPR_WKUPP4_Pos (11U) +#define PWR_WKUPEPR_WKUPP4_Msk (0x1UL << PWR_WKUPEPR_WKUPP4_Pos) /*!< 0x00000800 */ +#define PWR_WKUPEPR_WKUPP4 PWR_WKUPEPR_WKUPP4_Msk /*!< Wakeup Pin Polarity for WKUP4 */ + +#define PWR_WKUPEPR_WKUPPUPD1_Pos (16U) +#define PWR_WKUPEPR_WKUPPUPD1_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00030000 */ +#define PWR_WKUPEPR_WKUPPUPD1 PWR_WKUPEPR_WKUPPUPD1_Msk /*!< Wakeup Pin pull configuration for WKUP1 */ +#define PWR_WKUPEPR_WKUPPUPD1_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00010000 */ +#define PWR_WKUPEPR_WKUPPUPD1_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00020000 */ +#define PWR_WKUPEPR_WKUPPUPD2_Pos (18U) +#define PWR_WKUPEPR_WKUPPUPD2_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x000C0000 */ +#define PWR_WKUPEPR_WKUPPUPD2 PWR_WKUPEPR_WKUPPUPD2_Msk /*!< Wakeup Pin pull configuration for WKUP2 */ +#define PWR_WKUPEPR_WKUPPUPD2_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00040000 */ +#define PWR_WKUPEPR_WKUPPUPD2_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00080000 */ +#define PWR_WKUPEPR_WKUPPUPD3_Pos (20U) +#define PWR_WKUPEPR_WKUPPUPD3_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00300000 */ +#define PWR_WKUPEPR_WKUPPUPD3 PWR_WKUPEPR_WKUPPUPD3_Msk /*!< Wakeup Pin pull configuration for WKUP3 */ +#define PWR_WKUPEPR_WKUPPUPD3_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00100000 */ +#define PWR_WKUPEPR_WKUPPUPD3_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00200000 */ +#define PWR_WKUPEPR_WKUPPUPD4_Pos (22U) +#define PWR_WKUPEPR_WKUPPUPD4_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00C00000 */ +#define PWR_WKUPEPR_WKUPPUPD4 PWR_WKUPEPR_WKUPPUPD4_Msk /*!< Wakeup Pin pull configuration for WKUP4 */ +#define PWR_WKUPEPR_WKUPPUPD4_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00400000 */ +#define PWR_WKUPEPR_WKUPPUPD4_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for PWR_UCPDRR register ********************/ +#define PWR_UCPDR_UCPD_DBDIS_Pos (0U) +#define PWR_UCPDR_UCPD_DBDIS_Msk (0x1UL << PWR_UCPDR_UCPD_DBDIS_Pos) /*!< 0x00000001 */ +#define PWR_UCPDR_UCPD_DBDIS PWR_UCPDR_UCPD_DBDIS_Msk /*!< UCPD dead battery disable */ + +#define PWR_UCPDR_UCPD_STBY_Pos (1U) +#define PWR_UCPDR_UCPD_STBY_Msk (0x1UL << PWR_UCPDR_UCPD_STBY_Pos) /*!< 0x00000002 */ +#define PWR_UCPDR_UCPD_STBY PWR_UCPDR_UCPD_STBY_Msk /*!< UCPD Standby mode */ + +/******************** Bit definition for PWR_APCR register ********************/ +#define PWR_APCR_APC_Pos (0U) +#define PWR_APCR_APC_Msk (0x1UL << PWR_APCR_APC_Pos) /*!< 0x00000001 */ +#define PWR_APCR_APC PWR_APCR_APC_Msk /*!< Apply pull configuration register */ + +#define PWR_APCR_PN7_PUPD_Pos (16U) +#define PWR_APCR_PN7_PUPD_Msk (0x1UL << PWR_APCR_PN7_PUPD_Pos) /*!< 0x00010000 */ +#define PWR_APCR_PN7_PUPD PWR_APCR_PN7_PUPD_Msk /*!< Port N bit 7 pull-up/down configuration */ + +#define PWR_APCR_PO5_PUPD_Pos (17) +#define PWR_APCR_PO5_PUPD_Msk (0x1UL << PWR_APCR_PO5_PUPD_Pos) /*!< 0x00020000 */ +#define PWR_APCR_PO5_PUPD PWR_APCR_PO5_PUPD_Msk /*!< Port O bit 5 pull-up/down configuration */ + +#define PWR_APCR_I3CPB6_PU_Pos (28U) +#define PWR_APCR_I3CPB6_PU_Msk (0x1UL << PWR_APCR_I3CPB6_PU_Pos) /*!< 0x10000000 */ +#define PWR_APCR_I3CPB6_PU PWR_APCR_I3CPB6_PU_Msk /*!< Port PB6 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB7_PU_Pos (29U) +#define PWR_APCR_I3CPB7_PU_Msk (0x1UL << PWR_APCR_I3CPB7_PU_Pos) /*!< 0x20000000 */ +#define PWR_APCR_I3CPB7_PU PWR_APCR_I3CPB7_PU_Msk /*!< Port PB7 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB8_PU_Pos (30U) +#define PWR_APCR_I3CPB8_PU_Msk (0x1UL << PWR_APCR_I3CPB8_PU_Pos) /*!< 0x40000000 */ +#define PWR_APCR_I3CPB8_PU PWR_APCR_I3CPB8_PU_Msk /*!< Port PB8 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB9_PU_Pos (31U) +#define PWR_APCR_I3CPB9_PU_Msk (0x1UL << PWR_APCR_I3CPB9_PU_Pos) /*!< 0x80000000 */ +#define PWR_APCR_I3CPB9_PU PWR_APCR_I3CPB9_PU_Msk /*!< Port PB9 I3C pull-up bit configuration */ + +/******************** Bit definition for PWR_PUCRN register ********************/ +#define PWR_PUCRN_PUN1_Pos (1U) +#define PWR_PUCRN_PUN1_Msk (0x1UL << PWR_PUCRN_PUN1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRN_PUN1 PWR_PUCRN_PUN1_Msk /*!< PUN1: Port N pull-up */ + +#define PWR_PUCRN_PUN6_Pos (6U) +#define PWR_PUCRN_PUN6_Msk (0x1UL << PWR_PUCRN_PUN6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRN_PUN6 PWR_PUCRN_PUN6_Msk /*!< PUN6: Port N pull-up */ + +#define PWR_PUCRN_PUN12_Pos (12U) +#define PWR_PUCRN_PUN12_Msk (0x1UL << PWR_PUCRN_PUN12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRN_PUN12 PWR_PUCRN_PUN12_Msk /*!< PUN12: Port N pull-up */ + +/******************** Bit definition for PWR_PDCRN register ********************/ +#define PWR_PDCRN_PDN0_Pos (0U) +#define PWR_PDCRN_PDN0_Msk (0x1UL << PWR_PDCRN_PDN0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRN_PDN0 PWR_PDCRN_PDN0_Msk /*!< PDN0: Port N pull-down */ + +#define PWR_PDCRN_PDN1_Pos (1U) +#define PWR_PDCRN_PDN1_Msk (0x1UL << PWR_PDCRN_PDN1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRN_PDN1 PWR_PDCRN_PDN1_Msk /*!< PDN1: Port N pull-down */ + +#define PWR_PDCRN_PDN2N5_Pos (2U) +#define PWR_PDCRN_PDN2N5_Msk (0x1UL << PWR_PDCRN_PDN2N5_Pos) /*!< 0x00000004 */ +#define PWR_PDCRN_PDN2N5 PWR_PDCRN_PDN2N5_Msk /*!< PDN2 to PDN5: Port N pull-down */ + +#define PWR_PDCRN_PDN6_Pos (6U) +#define PWR_PDCRN_PDN6_Msk (0x1UL << PWR_PDCRN_PDN6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRN_PDN6 PWR_PDCRN_PDN6_Msk /*!< PDN6: Port N pull-down */ + +#define PWR_PDCRN_PDN8N11_Pos (8U) +#define PWR_PDCRN_PDN8N11_Msk (0x1UL << PWR_PDCRN_PDN8N11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRN_PDN8N11 PWR_PDCRN_PDN8N11_Msk /*!< PDN8 to PDN11: Port N pull-down */ + +#define PWR_PDCRN_PDN12_Pos (12U) +#define PWR_PDCRN_PDN12_Msk (0x1UL << PWR_PDCRN_PDN12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRN_PDN12 PWR_PDCRN_PDN12_Msk /*!< PDN12: Port N pull-down */ + +/******************** Bit definition for PWR_PUCRO register ********************/ +#define PWR_PUCRO_PUO0_Pos (0U) +#define PWR_PUCRO_PUO0_Msk (0x1UL << PWR_PUCRO_PUO0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRO_PUO0 PWR_PUCRO_PUO0_Msk /*!< PUO0: Port O pull-up */ + +#define PWR_PUCRO_PUO1_Pos (1U) +#define PWR_PUCRO_PUO1_Msk (0x1UL << PWR_PUCRO_PUO1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRO_PUO1 PWR_PUCRO_PUO1_Msk /*!< PUO1: Port O pull-up */ + +#define PWR_PUCRO_PUO4_Pos (4U) +#define PWR_PUCRO_PUO4_Msk (0x1UL << PWR_PUCRO_PUO4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRO_PUO4 PWR_PUCRO_PUO4_Msk /*!< PUO4: Port O pull-up */ + +/******************** Bit definition for PWR_PDCRO register ********************/ +#define PWR_PDCRO_PDO0_Pos (0U) +#define PWR_PDCRO_PDO0_Msk (0x1UL << PWR_PDCRO_PDO0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRO_PDO0 PWR_PDCRO_PDO0_Msk /*!< PDO0: Port O pull-down */ + +#define PWR_PDCRO_PDO1_Pos (1U) +#define PWR_PDCRO_PDO1_Msk (0x1UL << PWR_PDCRO_PDO1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRO_PDO1 PWR_PDCRO_PDO1_Msk /*!< PDO1: Port O pull-down */ + +#define PWR_PDCRO_PDO2_Pos (2U) +#define PWR_PDCRO_PDO2_Msk (0x1UL << PWR_PDCRO_PDO2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRO_PDO2 PWR_PDCRO_PDO2_Msk /*!< PDO2: Port O pull-down */ + +#define PWR_PDCRO_PDO3_Pos (3U) +#define PWR_PDCRO_PDO3_Msk (0x1UL << PWR_PDCRO_PDO3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRO_PDO3 PWR_PDCRO_PDO3_Msk /*!< PDO3: Port O pull-down */ + +#define PWR_PDCRO_PDO4_Pos (4U) +#define PWR_PDCRO_PDO4_Msk (0x1UL << PWR_PDCRO_PDO4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRO_PDO4 PWR_PDCRO_PDO4_Msk /*!< PDO4: Port O pull-down */ + +/******************** Bit definition for PWR_PDCRP register ********************/ +#define PWR_PDCRP_PDP0P3_Pos (0U) +#define PWR_PDCRP_PDP0P3_Msk (0x1UL << PWR_PDCRP_PDP0P3_Pos) /*!< 0x00000001 */ +#define PWR_PDCRP_PDP0P3 PWR_PDCRP_PDP0P3_Msk /*!< PPO0 to PP03 : Port P pull-down */ + +#define PWR_PDCRP_PDP4P7_Pos (4U) +#define PWR_PDCRP_PDP4P7_Msk (0x1UL << PWR_PDCRP_PDP4P7_Pos) /*!< 0x00000010 */ +#define PWR_PDCRP_PDP4P7 PWR_PDCRP_PDP4P7_Msk /*!< PPO4 to PP07 : Port P pull-down */ + +#define PWR_PDCRP_PDP8P11_Pos (8U) +#define PWR_PDCRP_PDP8P11_Msk (0x1UL << PWR_PDCRP_PDP8P11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRP_PDP8P11 PWR_PDCRP_PDP8P11_Msk /*!< PPO8 to PP11 : Port P pull-down */ + +#define PWR_PDCRP_PDP12P15_Pos (12U) +#define PWR_PDCRP_PDP12P15_Msk (0x1UL << PWR_PDCRP_PDP12P15_Pos) /*!< 0x00001000 */ +#define PWR_PDCRP_PDP12P15 PWR_PDCRP_PDP12P15_Msk /*!< PP12 to PP15 : Port P pull-down */ + + +/******************************************************************************/ +/* */ +/* RAM ECC monitoring */ +/* */ +/******************************************************************************/ +/****************** Bit definition for RAMECC_IER register ******************/ +#define RAMECC_IER_GIE_Pos (0U) +#define RAMECC_IER_GIE_Msk (0x1UL << RAMECC_IER_GIE_Pos) /*!< 0x00000001 */ +#define RAMECC_IER_GIE RAMECC_IER_GIE_Msk /*!< Global interrupt enable */ +#define RAMECC_IER_GECCSEIE_Pos (1U) +#define RAMECC_IER_GECCSEIE_Msk (0x1UL << RAMECC_IER_GECCSEIE_Pos) /*!< 0x00000002 */ +#define RAMECC_IER_GECCSEIE RAMECC_IER_GECCSEIE_Msk /*!< Global ECC single error interrupt enable */ +#define RAMECC_IER_GECCDEIE_Pos (2U) +#define RAMECC_IER_GECCDEIE_Msk (0x1UL << RAMECC_IER_GECCDEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_IER_GECCDEIE RAMECC_IER_GECCDEIE_Msk /*!< Global ECC double error interrupt enable */ +#define RAMECC_IER_GECCDEBWIE_Pos (3U) +#define RAMECC_IER_GECCDEBWIE_Msk (0x1UL << RAMECC_IER_GECCDEBWIE_Pos) /*!< 0x00000008 */ +#define RAMECC_IER_GECCDEBWIE RAMECC_IER_GECCDEBWIE_Msk /*!< Global ECC double error on byte write (BW) interrupt enable */ + +/******************* Bit definition for RAMECC_CR register ******************/ +#define RAMECC_CR_ECCSEIE_Pos (2U) +#define RAMECC_CR_ECCSEIE_Msk (0x1UL << RAMECC_CR_ECCSEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_CR_ECCSEIE RAMECC_CR_ECCSEIE_Msk /*!< ECC single error interrupt enable */ +#define RAMECC_CR_ECCDEIE_Pos (3U) +#define RAMECC_CR_ECCDEIE_Msk (0x1UL << RAMECC_CR_ECCDEIE_Pos) /*!< 0x00000008 */ +#define RAMECC_CR_ECCDEIE RAMECC_CR_ECCDEIE_Msk /*!< ECC double error interrupt enable */ +#define RAMECC_CR_ECCDEBWIE_Pos (4U) +#define RAMECC_CR_ECCDEBWIE_Msk (0x1UL << RAMECC_CR_ECCDEBWIE_Pos) /*!< 0x00000010 */ +#define RAMECC_CR_ECCDEBWIE RAMECC_CR_ECCDEBWIE_Msk /*!< ECC double error on byte write (BW) interrupt enable */ +#define RAMECC_CR_ECCELEN_Pos (5U) +#define RAMECC_CR_ECCELEN_Msk (0x1UL << RAMECC_CR_ECCELEN_Pos) /*!< 0x00000020 */ +#define RAMECC_CR_ECCELEN RAMECC_CR_ECCELEN_Msk /*!< ECC error latching enable */ + +/******************* Bit definition for RAMECC_SR register ******************/ +#define RAMECC_SR_SEDCF_Pos (0U) +#define RAMECC_SR_SEDCF_Msk (0x1UL << RAMECC_SR_SEDCF_Pos) /*!< 0x00000001 */ +#define RAMECC_SR_SEDCF RAMECC_SR_SEDCF_Msk /*!< ECC single error detected and corrected flag */ +#define RAMECC_SR_DEDF_Pos (1U) +#define RAMECC_SR_DEDF_Msk (0x1UL << RAMECC_SR_DEDF_Pos) /*!< 0x00000002 */ +#define RAMECC_SR_DEDF RAMECC_SR_DEDF_Msk /*!< ECC double error detected flag */ +#define RAMECC_SR_DEBWDF_Pos (2U) +#define RAMECC_SR_DEBWDF_Msk (0x1UL << RAMECC_SR_DEBWDF_Pos) /*!< 0x00000004 */ +#define RAMECC_SR_DEBWDF RAMECC_SR_DEBWDF_Msk /*!< ECC double error on byte write (BW) detected flag */ + +/****************** Bit definition for RAMECC_FAR register ******************/ +#define RAMECC_FAR_FADD_Pos (0U) +#define RAMECC_FAR_FADD_Msk (0xFFFFFFFFUL << RAMECC_FAR_FADD_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FAR_FADD RAMECC_FAR_FADD_Msk /*!< ECC error failing address */ + +/****************** Bit definition for RAMECC_FDRL register *****************/ +#define RAMECC_FDRL_FDATAL_Pos (0U) +#define RAMECC_FDRL_FDATAL_Msk (0xFFFFFFFFUL << RAMECC_FDRL_FDATAL_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRL_FDATAL RAMECC_FDRL_FDATAL_Msk /*!< Failing data low */ + +/****************** Bit definition for RAMECC_FDRH register *****************/ +#define RAMECC_FDRH_FDATAH_Pos (0U) +#define RAMECC_FDRH_FDATAH_Msk (0xFFFFFFFFUL << RAMECC_FDRH_FDATAH_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRH_FDATAH RAMECC_FDRH_FDATAH_Msk /* Failing data high (64-bit memory) */ + +/***************** Bit definition for RAMECC_FECR register ******************/ +#define RAMECC_FECR_FEC_Pos (0U) +#define RAMECC_FECR_FEC_Msk (0xFFFFFFFFUL << RAMECC_FECR_FEC_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FECR_FEC RAMECC_FECR_FEC_Msk /*!< Failing error code */ + + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIKERON_Pos (1U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed clock enable in Stop mode */ +#define RCC_CR_HSIRDY_Pos (2U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000004 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSIDIV_Pos (3U) +#define RCC_CR_HSIDIV_Msk (0x3UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000018 */ +#define RCC_CR_HSIDIV RCC_CR_HSIDIV_Msk /*!< Internal High Speed clock divider selection */ +#define RCC_CR_HSIDIV_0 (0x1UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000008 */ +#define RCC_CR_HSIDIV_1 (0x2UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000010 */ + +#define RCC_CR_HSIDIVF_Pos (5U) +#define RCC_CR_HSIDIVF_Msk (0x1UL << RCC_CR_HSIDIVF_Pos) /*!< 0x00000020 */ +#define RCC_CR_HSIDIVF RCC_CR_HSIDIVF_Msk /*!< HSI Divider flag */ +#define RCC_CR_CSION_Pos (7U) +#define RCC_CR_CSION_Msk (0x1UL << RCC_CR_CSION_Pos) /*!< 0x00000080 */ +#define RCC_CR_CSION RCC_CR_CSION_Msk /*!< The Internal RC 4MHz oscillator clock enable */ +#define RCC_CR_CSIRDY_Pos (8U) +#define RCC_CR_CSIRDY_Msk (0x1UL << RCC_CR_CSIRDY_Pos) /*!< 0x00000100 */ +#define RCC_CR_CSIRDY RCC_CR_CSIRDY_Msk /*!< The Internal RC 4MHz oscillator clock ready */ +#define RCC_CR_CSIKERON_Pos (9U) +#define RCC_CR_CSIKERON_Msk (0x1UL << RCC_CR_CSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_CSIKERON RCC_CR_CSIKERON_Msk /*!< Internal RC 4MHz oscillator clock enable in Stop mode */ +#define RCC_CR_HSI48ON_Pos (12U) +#define RCC_CR_HSI48ON_Msk (0x1UL << RCC_CR_HSI48ON_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSI48ON RCC_CR_HSI48ON_Msk /*!< HSI48 clock enable clock enable */ +#define RCC_CR_HSI48RDY_Pos (13U) +#define RCC_CR_HSI48RDY_Msk (0x1UL << RCC_CR_HSI48RDY_Pos) /*!< 0x00002000 */ +#define RCC_CR_HSI48RDY RCC_CR_HSI48RDY_Msk /*!< HSI48 clock ready flag */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock bypass */ +#define RCC_CR_HSEEXT_Pos (19U) +#define RCC_CR_HSEEXT_Msk (0x1UL << RCC_CR_HSEEXT_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEEXT RCC_CR_HSEEXT_Msk /*!< External High Speed clock type in bypass mode */ +#define RCC_CR_HSECSSON_Pos (20U) +#define RCC_CR_HSECSSON_Msk (0x1UL << RCC_CR_HSECSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_HSECSSON RCC_CR_HSECSSON_Msk /*!< HSE Clock security System enable */ +#define RCC_CR_PLL1ON_Pos (24U) +#define RCC_CR_PLL1ON_Msk (0x1UL << RCC_CR_PLL1ON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLL1ON RCC_CR_PLL1ON_Msk /*!< System PLL1 clock enable */ +#define RCC_CR_PLL1RDY_Pos (25U) +#define RCC_CR_PLL1RDY_Msk (0x1UL << RCC_CR_PLL1RDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLL1RDY RCC_CR_PLL1RDY_Msk /*!< System PLL1 clock ready flag */ +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< System PLL2 clock enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< System PLL2 clock ready flag */ +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< System PLL3 clock enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< System PLL3 clock ready flag */ + +/******************** Bit definition for RCC_HSICFGR register ***************/ +/*!< HSICAL configuration */ +#define RCC_HSICFGR_HSICAL_Pos (0U) +#define RCC_HSICFGR_HSICAL_Msk (0xFFFUL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000FFF */ +#define RCC_HSICFGR_HSICAL RCC_HSICFGR_HSICAL_Msk /*!< HSICAL[11:0] bits */ +#define RCC_HSICFGR_HSICAL_0 (0x001UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000001 */ +#define RCC_HSICFGR_HSICAL_1 (0x002UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000002 */ +#define RCC_HSICFGR_HSICAL_2 (0x004UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000004 */ +#define RCC_HSICFGR_HSICAL_3 (0x008UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000008 */ +#define RCC_HSICFGR_HSICAL_4 (0x010UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000010 */ +#define RCC_HSICFGR_HSICAL_5 (0x020UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000020 */ +#define RCC_HSICFGR_HSICAL_6 (0x040UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000040 */ +#define RCC_HSICFGR_HSICAL_7 (0x080UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000080 */ +#define RCC_HSICFGR_HSICAL_8 (0x100UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000100 */ +#define RCC_HSICFGR_HSICAL_9 (0x200UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000200 */ +#define RCC_HSICFGR_HSICAL_10 (0x400UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000400 */ +#define RCC_HSICFGR_HSICAL_11 (0x800UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000800 */ + +/*!< HSITRIM configuration */ +#define RCC_HSICFGR_HSITRIM_Pos (24U) +#define RCC_HSICFGR_HSITRIM_Msk (0x7FUL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_HSICFGR_HSITRIM RCC_HSICFGR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_HSICFGR_HSITRIM_0 (0x01UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_HSICFGR_HSITRIM_1 (0x02UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_HSICFGR_HSITRIM_2 (0x04UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_HSICFGR_HSITRIM_3 (0x08UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_HSICFGR_HSITRIM_4 (0x10UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_HSICFGR_HSITRIM_5 (0x20UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_HSICFGR_HSITRIM_6 (0x40UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CRRCR register *****************/ +/*!< HSI48CAL configuration */ +#define RCC_CRRCR_HSI48CAL_Pos (0U) +#define RCC_CRRCR_HSI48CAL_Msk (0x3FFUL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x000003FF */ +#define RCC_CRRCR_HSI48CAL RCC_CRRCR_HSI48CAL_Msk /*!< HSI48CAL[9:0] bits */ +#define RCC_CRRCR_HSI48CAL_0 (0x001UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000001 */ +#define RCC_CRRCR_HSI48CAL_1 (0x002UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000002 */ +#define RCC_CRRCR_HSI48CAL_2 (0x004UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000004 */ +#define RCC_CRRCR_HSI48CAL_3 (0x008UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000008 */ +#define RCC_CRRCR_HSI48CAL_4 (0x010UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000010 */ +#define RCC_CRRCR_HSI48CAL_5 (0x020UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000020 */ +#define RCC_CRRCR_HSI48CAL_6 (0x040UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000040 */ +#define RCC_CRRCR_HSI48CAL_7 (0x080UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000080 */ +#define RCC_CRRCR_HSI48CAL_8 (0x100UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000100 */ +#define RCC_CRRCR_HSI48CAL_9 (0x200UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_CSICFGR register ***************/ +/*!< CSICAL configuration */ +#define RCC_CSICFGR_CSICAL_Pos (0U) +#define RCC_CSICFGR_CSICAL_Msk (0xFFUL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x000000FF */ +#define RCC_CSICFGR_CSICAL RCC_CSICFGR_CSICAL_Msk /*!< CSICAL[7:0] bits */ +#define RCC_CSICFGR_CSICAL_0 (0x01UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000001 */ +#define RCC_CSICFGR_CSICAL_1 (0x02UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000002 */ +#define RCC_CSICFGR_CSICAL_2 (0x04UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000004 */ +#define RCC_CSICFGR_CSICAL_3 (0x08UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000008 */ +#define RCC_CSICFGR_CSICAL_4 (0x10UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000010 */ +#define RCC_CSICFGR_CSICAL_5 (0x20UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000020 */ +#define RCC_CSICFGR_CSICAL_6 (0x40UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000040 */ +#define RCC_CSICFGR_CSICAL_7 (0x80UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000080 */ + +/*!< CSITRIM configuration */ +#define RCC_CSICFGR_CSITRIM_Pos (24U) +#define RCC_CSICFGR_CSITRIM_Msk (0x3FUL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x3F000000 */ +#define RCC_CSICFGR_CSITRIM RCC_CSICFGR_CSITRIM_Msk /*!< CSITRIM[5:0] bits */ +#define RCC_CSICFGR_CSITRIM_0 (0x01UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_CSICFGR_CSITRIM_1 (0x02UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_CSICFGR_CSITRIM_2 (0x04UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_CSICFGR_CSITRIM_3 (0x08UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_CSICFGR_CSITRIM_4 (0x10UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_CSICFGR_CSITRIM_5 (0x20UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x7UL << RCC_CFGR_SW_Pos) /*!< 0x00000007 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[2:0] bits (System clock switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ +#define RCC_CFGR_SW_2 (0x4UL << RCC_CFGR_SW_Pos) /*!< 0x00000004 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (3U) +#define RCC_CFGR_SWS_Msk (0x7UL << RCC_CFGR_SWS_Pos) /*!< 0x00000038 */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[2:0] bits (System clock switch status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_SWS_2 (0x4UL << RCC_CFGR_SWS_Pos) /*!< 0x00000020 */ + +#define RCC_CFGR_STOPWUCK_Pos (6U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ +#define RCC_CFGR_STOPKERWUCK_Pos (7U) +#define RCC_CFGR_STOPKERWUCK_Msk (0x1UL << RCC_CFGR_STOPKERWUCK_Pos) /*!< 0x00000080 */ +#define RCC_CFGR_STOPKERWUCK RCC_CFGR_STOPKERWUCK_Msk /*!< Kernel Clock Selection after a Wake Up from Stop */ + +/*!< RTCPRE configuration */ +#define RCC_CFGR_RTCPRE_Pos (8U) +#define RCC_CFGR_RTCPRE_Msk (0x3FUL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00003F00 */ +#define RCC_CFGR_RTCPRE RCC_CFGR_RTCPRE_Msk /*!< RTCPRE[5:0] bits (HSE division factor for RTC clock) */ +#define RCC_CFGR_RTCPRE_0 (0x01UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_RTCPRE_1 (0x02UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_RTCPRE_2 (0x04UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000400 */ +#define RCC_CFGR_RTCPRE_3 (0x08UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_RTCPRE_4 (0x10UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_RTCPRE_5 (0x20UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_TIMPRE_Pos (15U) +#define RCC_CFGR_TIMPRE_Msk (0x1UL << RCC_CFGR_TIMPRE_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_TIMPRE RCC_CFGR_TIMPRE_Msk /*!< TIMPRE configuration */ + +#define RCC_CFGR_MCO1PRE_Pos (18U) +#define RCC_CFGR_MCO1PRE_Msk (0xFUL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_MCO1PRE RCC_CFGR_MCO1PRE_Msk /*!< MCO1 configuration */ +#define RCC_CFGR_MCO1PRE_0 (0x1UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_MCO1PRE_1 (0x2UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_MCO1PRE_2 (0x4UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_MCO1PRE_3 (0x8UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_MCO1SEL_Pos (22U) +#define RCC_CFGR_MCO1SEL_Msk (0x7UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01C00000 */ +#define RCC_CFGR_MCO1SEL RCC_CFGR_MCO1SEL_Msk /*!< MCO1SEL [2:0] bits (MCO1 clock output selection) */ +#define RCC_CFGR_MCO1SEL_0 (0x1UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_MCO1SEL_1 (0x2UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00800000 */ +#define RCC_CFGR_MCO1SEL_2 (0x4UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01000000 */ + +#define RCC_CFGR_MCO2PRE_Pos (25U) +#define RCC_CFGR_MCO2PRE_Msk (0xFUL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x1E000000 */ +#define RCC_CFGR_MCO2PRE RCC_CFGR_MCO2PRE_Msk /*!< MCO2 configuration */ +#define RCC_CFGR_MCO2PRE_0 (0x1UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO2PRE_1 (0x2UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO2PRE_2 (0x4UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x08000000 */ +#define RCC_CFGR_MCO2PRE_3 (0x8UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x10000000 */ + +#define RCC_CFGR_MCO2SEL_Pos (29U) +#define RCC_CFGR_MCO2SEL_Msk (0x7UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0xE0000000 */ +#define RCC_CFGR_MCO2SEL RCC_CFGR_MCO2SEL_Msk /*!< MCO2SEL [2:0] bits (MCO2 clock output selection) */ +#define RCC_CFGR_MCO2SEL_0 (0x1UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCO2SEL_1 (0x2UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x40000000 */ +#define RCC_CFGR_MCO2SEL_2 (0x4UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CDCFGR register ****************/ +/*!< CPRE configuration */ +#define RCC_CDCFGR_CPRE_Pos (0U) +#define RCC_CDCFGR_CPRE_Msk (0xFUL << RCC_CDCFGR_CPRE_Pos) /*!< 0x0000000F */ +#define RCC_CDCFGR_CPRE RCC_CDCFGR_CPRE_Msk /*!< CPRE[3:0] bits */ +#define RCC_CDCFGR_CPRE_0 (0x1UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000001 */ +#define RCC_CDCFGR_CPRE_1 (0x2UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000002 */ +#define RCC_CDCFGR_CPRE_2 (0x4UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000004 */ +#define RCC_CDCFGR_CPRE_3 (0x8UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_BMCFGR register ****************/ +/*!< BMPRE configuration */ +#define RCC_BMCFGR_BMPRE_Pos (0U) +#define RCC_BMCFGR_BMPRE_Msk (0xFUL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x0000000F */ +#define RCC_BMCFGR_BMPRE RCC_BMCFGR_BMPRE_Msk /*!< BMPRE[3:0] bits */ +#define RCC_BMCFGR_BMPRE_0 (0x1UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000001 */ +#define RCC_BMCFGR_BMPRE_1 (0x2UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000002 */ +#define RCC_BMCFGR_BMPRE_2 (0x4UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000004 */ +#define RCC_BMCFGR_BMPRE_3 (0x8UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_APBCFGR register ***************/ +/*!< APB1 prescaler configuration */ +#define RCC_APBCFGR_PPRE1_Pos (0U) +#define RCC_APBCFGR_PPRE1_Msk (0x7UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000007 */ +#define RCC_APBCFGR_PPRE1 RCC_APBCFGR_PPRE1_Msk /*!< PPRE1[2:0] bits */ +#define RCC_APBCFGR_PPRE1_0 (0x1UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000001 */ +#define RCC_APBCFGR_PPRE1_1 (0x2UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000002 */ +#define RCC_APBCFGR_PPRE1_2 (0x4UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000004 */ + +/*!< APB2 prescaler configuration */ +#define RCC_APBCFGR_PPRE2_Pos (4U) +#define RCC_APBCFGR_PPRE2_Msk (0x7UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000070 */ +#define RCC_APBCFGR_PPRE2 RCC_APBCFGR_PPRE2_Msk /*!< PPRE2[2:0] bits */ +#define RCC_APBCFGR_PPRE2_0 (0x1UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000010 */ +#define RCC_APBCFGR_PPRE2_1 (0x2UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000020 */ +#define RCC_APBCFGR_PPRE2_2 (0x4UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000040 */ + +/*!< APB4 prescaler configuration */ +#define RCC_APBCFGR_PPRE4_Pos (8U) +#define RCC_APBCFGR_PPRE4_Msk (0x7UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000700 */ +#define RCC_APBCFGR_PPRE4 RCC_APBCFGR_PPRE4_Msk /*!< PPRE4[2:0] bits */ +#define RCC_APBCFGR_PPRE4_0 (0x1UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000100 */ +#define RCC_APBCFGR_PPRE4_1 (0x2UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000200 */ +#define RCC_APBCFGR_PPRE4_2 (0x4UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000400 */ + +/*!< APB5 prescaler configuration */ +#define RCC_APBCFGR_PPRE5_Pos (12U) +#define RCC_APBCFGR_PPRE5_Msk (0x7UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00007000 */ +#define RCC_APBCFGR_PPRE5 RCC_APBCFGR_PPRE5_Msk /*!< PPRE5[2:0] bits */ +#define RCC_APBCFGR_PPRE5_0 (0x1UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00001000 */ +#define RCC_APBCFGR_PPRE5_1 (0x2UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00002000 */ +#define RCC_APBCFGR_PPRE5_2 (0x4UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_PLLCKSELR register *************/ +#define RCC_PLLCKSELR_PLLSRC_Pos (0U) +#define RCC_PLLCKSELR_PLLSRC_Msk (0x3UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCKSELR_PLLSRC RCC_PLLCKSELR_PLLSRC_Msk /*!< DIVMx and PLLs clock source selection */ +#define RCC_PLLCKSELR_PLLSRC_0 (0x01UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_PLLSRC_1 (0x02UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000020 */ + +#define RCC_PLLCKSELR_DIVM1_Pos (4U) +#define RCC_PLLCKSELR_DIVM1_Msk (0x3FUL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x000003F0 */ +#define RCC_PLLCKSELR_DIVM1 RCC_PLLCKSELR_DIVM1_Msk /*!< DIVM1[5:0] bits */ +#define RCC_PLLCKSELR_DIVM1_0 (0x01UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_DIVM1_1 (0x02UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000020 */ +#define RCC_PLLCKSELR_DIVM1_2 (0x04UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000040 */ +#define RCC_PLLCKSELR_DIVM1_3 (0x08UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000080 */ +#define RCC_PLLCKSELR_DIVM1_4 (0x10UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000100 */ +#define RCC_PLLCKSELR_DIVM1_5 (0x20UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000200 */ + +#define RCC_PLLCKSELR_DIVM2_Pos (12U) +#define RCC_PLLCKSELR_DIVM2_Msk (0x3FUL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x0003F000 */ +#define RCC_PLLCKSELR_DIVM2 RCC_PLLCKSELR_DIVM2_Msk /*!< DIVM2[5:0] bits */ +#define RCC_PLLCKSELR_DIVM2_0 (0x01UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00001000 */ +#define RCC_PLLCKSELR_DIVM2_1 (0x02UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00002000 */ +#define RCC_PLLCKSELR_DIVM2_2 (0x04UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00004000 */ +#define RCC_PLLCKSELR_DIVM2_3 (0x08UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00008000 */ +#define RCC_PLLCKSELR_DIVM2_4 (0x10UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00010000 */ +#define RCC_PLLCKSELR_DIVM2_5 (0x20UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00020000 */ + +#define RCC_PLLCKSELR_DIVM3_Pos (20U) +#define RCC_PLLCKSELR_DIVM3_Msk (0x3FUL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x03F00000 */ +#define RCC_PLLCKSELR_DIVM3 RCC_PLLCKSELR_DIVM3_Msk /*!< DIVM3[5:0] bits */ +#define RCC_PLLCKSELR_DIVM3_0 (0x01UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00100000 */ +#define RCC_PLLCKSELR_DIVM3_1 (0x02UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00200000 */ +#define RCC_PLLCKSELR_DIVM3_2 (0x04UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00400000 */ +#define RCC_PLLCKSELR_DIVM3_3 (0x08UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00800000 */ +#define RCC_PLLCKSELR_DIVM3_4 (0x10UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x01000000 */ +#define RCC_PLLCKSELR_DIVM3_5 (0x20UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLL1FRACEN_Pos (0U) +#define RCC_PLLCFGR_PLL1FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL1FRACEN_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLL1FRACEN RCC_PLLCFGR_PLL1FRACEN_Msk /*!< PLL1 fractional latch enable */ +#define RCC_PLLCFGR_PLL1VCOSEL_Pos (1U) +#define RCC_PLLCFGR_PLL1VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL1VCOSEL_Pos) /*!< 0x00000002 */ +#define RCC_PLLCFGR_PLL1VCOSEL RCC_PLLCFGR_PLL1VCOSEL_Msk /*!< PLL1 VCO selection */ +#define RCC_PLLCFGR_PLL1SSCGEN_Pos (2U) +#define RCC_PLLCFGR_PLL1SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SSCGEN_Pos) /*!< 0x00000004 */ +#define RCC_PLLCFGR_PLL1SSCGEN RCC_PLLCFGR_PLL1SSCGEN_Msk /*!< PLL1 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL1RGE_Pos (3U) +#define RCC_PLLCFGR_PLL1RGE_Msk (0x3UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000018 */ +#define RCC_PLLCFGR_PLL1RGE RCC_PLLCFGR_PLL1RGE_Msk /*!< PLL1RGE[1:0] bits: PLL1 input frequency range */ +#define RCC_PLLCFGR_PLL1RGE_0 (0x1UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000008 */ +#define RCC_PLLCFGR_PLL1RGE_1 (0x2UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000010 */ + +#define RCC_PLLCFGR_PLL1PEN_Pos (5U) +#define RCC_PLLCFGR_PLL1PEN_Msk (0x1UL << RCC_PLLCFGR_PLL1PEN_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLL1PEN RCC_PLLCFGR_PLL1PEN_Msk /*!< PLL1 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL1QEN_Pos (6U) +#define RCC_PLLCFGR_PLL1QEN_Msk (0x1UL << RCC_PLLCFGR_PLL1QEN_Pos) /*!< 0x00000040 */ +#define RCC_PLLCFGR_PLL1QEN RCC_PLLCFGR_PLL1QEN_Msk /*!< PLL1 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL1REN_Pos (7U) +#define RCC_PLLCFGR_PLL1REN_Msk (0x1UL << RCC_PLLCFGR_PLL1REN_Pos) /*!< 0x00000080 */ +#define RCC_PLLCFGR_PLL1REN RCC_PLLCFGR_PLL1REN_Msk /*!< PLL1 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL1SEN_Pos (8U) +#define RCC_PLLCFGR_PLL1SEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SEN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLL1SEN RCC_PLLCFGR_PLL1SEN_Msk /*!< PLL1 DIVS divider output enable */ + +#define RCC_PLLCFGR_PLL2FRACEN_Pos (11U) +#define RCC_PLLCFGR_PLL2FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL2FRACEN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLL2FRACEN RCC_PLLCFGR_PLL2FRACEN_Msk /*!< PLL2 fractional latch enable */ +#define RCC_PLLCFGR_PLL2VCOSEL_Pos (12U) +#define RCC_PLLCFGR_PLL2VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL2VCOSEL_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLL2VCOSEL RCC_PLLCFGR_PLL2VCOSEL_Msk /*!< PLL2 VCO selection */ +#define RCC_PLLCFGR_PLL2SSCGEN_Pos (13U) +#define RCC_PLLCFGR_PLL2SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SSCGEN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLL2SSCGEN RCC_PLLCFGR_PLL2SSCGEN_Msk /*!< PLL2 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL2RGE_Pos (14U) +#define RCC_PLLCFGR_PLL2RGE_Msk (0x3UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x0000C000 */ +#define RCC_PLLCFGR_PLL2RGE RCC_PLLCFGR_PLL2RGE_Msk /*!< PLL2RGE[1:0] bits: PLL2 input frequency range */ +#define RCC_PLLCFGR_PLL2RGE_0 (0x1UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00004000 */ +#define RCC_PLLCFGR_PLL2RGE_1 (0x2UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00008000 */ + +#define RCC_PLLCFGR_PLL2PEN_Pos (16U) +#define RCC_PLLCFGR_PLL2PEN_Msk (0x1UL << RCC_PLLCFGR_PLL2PEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLL2PEN RCC_PLLCFGR_PLL2PEN_Msk /*!< PLL2 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL2QEN_Pos (17U) +#define RCC_PLLCFGR_PLL2QEN_Msk (0x1UL << RCC_PLLCFGR_PLL2QEN_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLL2QEN RCC_PLLCFGR_PLL2QEN_Msk /*!< PLL2 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL2REN_Pos (18U) +#define RCC_PLLCFGR_PLL2REN_Msk (0x1UL << RCC_PLLCFGR_PLL2REN_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLL2REN RCC_PLLCFGR_PLL2REN_Msk /*!< PLL2 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL2SEN_Pos (19U) +#define RCC_PLLCFGR_PLL2SEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SEN_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLL2SEN RCC_PLLCFGR_PLL2SEN_Msk /*!< PLL2 DIVS divider output enable */ +#define RCC_PLLCFGR_PLL2TEN_Pos (20U) +#define RCC_PLLCFGR_PLL2TEN_Msk (0x1UL << RCC_PLLCFGR_PLL2TEN_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLL2TEN RCC_PLLCFGR_PLL2TEN_Msk /*!< PLL2 DIVT divider output enable */ + +#define RCC_PLLCFGR_PLL3FRACEN_Pos (22U) +#define RCC_PLLCFGR_PLL3FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL3FRACEN_Pos) /*!< 0x00400000 */ +#define RCC_PLLCFGR_PLL3FRACEN RCC_PLLCFGR_PLL3FRACEN_Msk /*!< PLL3 fractional latch enable */ +#define RCC_PLLCFGR_PLL3VCOSEL_Pos (23U) +#define RCC_PLLCFGR_PLL3VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL3VCOSEL_Pos) /*!< 0x00800000 */ +#define RCC_PLLCFGR_PLL3VCOSEL RCC_PLLCFGR_PLL3VCOSEL_Msk /*!< PLL3 VCO selection */ +#define RCC_PLLCFGR_PLL3SSCGEN_Pos (24U) +#define RCC_PLLCFGR_PLL3SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SSCGEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLL3SSCGEN RCC_PLLCFGR_PLL3SSCGEN_Msk /*!< PLL3 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL3RGE_Pos (25U) +#define RCC_PLLCFGR_PLL3RGE_Msk (0x3UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x06000000 */ +#define RCC_PLLCFGR_PLL3RGE RCC_PLLCFGR_PLL3RGE_Msk /*!< PLL3RGE[1:0] bits: PLL3 input frequency range */ +#define RCC_PLLCFGR_PLL3RGE_0 (0x1UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLL3RGE_1 (0x2UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x04000000 */ + +#define RCC_PLLCFGR_PLL3PEN_Pos (27U) +#define RCC_PLLCFGR_PLL3PEN_Msk (0x1UL << RCC_PLLCFGR_PLL3PEN_Pos) /*!< 0x08000000 */ +#define RCC_PLLCFGR_PLL3PEN RCC_PLLCFGR_PLL3PEN_Msk /*!< PLL3 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL3QEN_Pos (28U) +#define RCC_PLLCFGR_PLL3QEN_Msk (0x1UL << RCC_PLLCFGR_PLL3QEN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLL3QEN RCC_PLLCFGR_PLL3QEN_Msk /*!< PLL3 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL3REN_Pos (29U) +#define RCC_PLLCFGR_PLL3REN_Msk (0x1UL << RCC_PLLCFGR_PLL3REN_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLL3REN RCC_PLLCFGR_PLL3REN_Msk /*!< PLL3 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL3SEN_Pos (30U) +#define RCC_PLLCFGR_PLL3SEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SEN_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLL3SEN RCC_PLLCFGR_PLL3SEN_Msk /*!< PLL3 DIVS divider output enable */ + +/******************** Bit definition for RCC_PLL1DIVR1 register *************/ +#define RCC_PLL1DIVR1_DIVN_Pos (0U) +#define RCC_PLL1DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL1DIVR1_DIVN RCC_PLL1DIVR1_DIVN_Msk /*!< DIVN1[8:0] bits: PLL1 DIVN division factor */ +#define RCC_PLL1DIVR1_DIVN_0 (0x001UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR1_DIVN_1 (0x002UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR1_DIVN_2 (0x004UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL1DIVR1_DIVN_3 (0x008UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL1DIVR1_DIVN_4 (0x010UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL1DIVR1_DIVN_5 (0x020UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL1DIVR1_DIVN_6 (0x040UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL1DIVR1_DIVN_7 (0x080UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL1DIVR1_DIVN_8 (0x100UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL1DIVR1_DIVP_Pos (9U) +#define RCC_PLL1DIVR1_DIVP_Msk (0x7FUL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL1DIVR1_DIVP RCC_PLL1DIVR1_DIVP_Msk /*!< DIVP1[6:0] bits: PLL1 DIVP division factor */ +#define RCC_PLL1DIVR1_DIVP_0 (0x001UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL1DIVR1_DIVP_1 (0x002UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL1DIVR1_DIVP_2 (0x004UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL1DIVR1_DIVP_3 (0x008UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL1DIVR1_DIVP_4 (0x010UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL1DIVR1_DIVP_5 (0x020UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL1DIVR1_DIVP_6 (0x040UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL1DIVR1_DIVQ_Pos (16U) +#define RCC_PLL1DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL1DIVR1_DIVQ RCC_PLL1DIVR1_DIVQ_Msk /*!< DIVQ1[6:0] bits: PLL1 DIVQ division factor */ +#define RCC_PLL1DIVR1_DIVQ_0 (0x001UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL1DIVR1_DIVQ_1 (0x002UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL1DIVR1_DIVQ_2 (0x004UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL1DIVR1_DIVQ_3 (0x008UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL1DIVR1_DIVQ_4 (0x010UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL1DIVR1_DIVQ_5 (0x020UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL1DIVR1_DIVQ_6 (0x040UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL1DIVR1_DIVR_Pos (24U) +#define RCC_PLL1DIVR1_DIVR_Msk (0x7FUL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL1DIVR1_DIVR RCC_PLL1DIVR1_DIVR_Msk /*!< DIVR1[6:0] bits: PLL1 DIVR division factor */ +#define RCC_PLL1DIVR1_DIVR_0 (0x001UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL1DIVR1_DIVR_1 (0x002UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL1DIVR1_DIVR_2 (0x004UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL1DIVR1_DIVR_3 (0x008UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL1DIVR1_DIVR_4 (0x010UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL1DIVR1_DIVR_5 (0x020UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL1DIVR1_DIVR_6 (0x040UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL1FRACR register *************/ +#define RCC_PLL1FRACR_FRACN_Pos (3U) +#define RCC_PLL1FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL1FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL1FRACR_FRACN RCC_PLL1FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL2DIVR1 register *************/ +#define RCC_PLL2DIVR1_DIVN_Pos (0U) +#define RCC_PLL2DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL2DIVR1_DIVN RCC_PLL2DIVR1_DIVN_Msk /*!< DIVN2[8:0] bits: PLL2 DIVN division factor */ +#define RCC_PLL2DIVR1_DIVN_0 (0x001UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR1_DIVN_1 (0x002UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR1_DIVN_2 (0x004UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL2DIVR1_DIVN_3 (0x008UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL2DIVR1_DIVN_4 (0x010UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL2DIVR1_DIVN_5 (0x020UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL2DIVR1_DIVN_6 (0x040UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL2DIVR1_DIVN_7 (0x080UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL2DIVR1_DIVN_8 (0x100UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL2DIVR1_DIVP_Pos (9U) +#define RCC_PLL2DIVR1_DIVP_Msk (0x7FUL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL2DIVR1_DIVP RCC_PLL2DIVR1_DIVP_Msk /*!< DIVP2[6:0] bits: PLL2 DIVP division factor */ +#define RCC_PLL2DIVR1_DIVP_0 (0x001UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR1_DIVP_1 (0x002UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL2DIVR1_DIVP_2 (0x004UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL2DIVR1_DIVP_3 (0x008UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL2DIVR1_DIVP_4 (0x010UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL2DIVR1_DIVP_5 (0x020UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL2DIVR1_DIVP_6 (0x040UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL2DIVR1_DIVQ_Pos (16U) +#define RCC_PLL2DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL2DIVR1_DIVQ RCC_PLL2DIVR1_DIVQ_Msk /*!< DIVQ2[6:0] bits: PLL2 DIVQ division factor */ +#define RCC_PLL2DIVR1_DIVQ_0 (0x001UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL2DIVR1_DIVQ_1 (0x002UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL2DIVR1_DIVQ_2 (0x004UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL2DIVR1_DIVQ_3 (0x008UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL2DIVR1_DIVQ_4 (0x010UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL2DIVR1_DIVQ_5 (0x020UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL2DIVR1_DIVQ_6 (0x040UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL2DIVR1_DIVR_Pos (24U) +#define RCC_PLL2DIVR1_DIVR_Msk (0x7FUL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL2DIVR1_DIVR RCC_PLL2DIVR1_DIVR_Msk /*!< DIVR2[6:0] bits: PLL2 DIVR division factor */ +#define RCC_PLL2DIVR1_DIVR_0 (0x001UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL2DIVR1_DIVR_1 (0x002UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL2DIVR1_DIVR_2 (0x004UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL2DIVR1_DIVR_3 (0x008UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL2DIVR1_DIVR_4 (0x010UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL2DIVR1_DIVR_5 (0x020UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL2DIVR1_DIVR_6 (0x040UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2FRACR register *************/ +#define RCC_PLL2FRACR_FRACN_Pos (3U) +#define RCC_PLL2FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL2FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL2FRACR_FRACN RCC_PLL2FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL3DIVR1 register *************/ +#define RCC_PLL3DIVR1_DIVN_Pos (0U) +#define RCC_PLL3DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL3DIVR1_DIVN RCC_PLL3DIVR1_DIVN_Msk /*!< DIVN3[8:0] bits: PLL3 DIVN division factor */ +#define RCC_PLL3DIVR1_DIVN_0 (0x001UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR1_DIVN_1 (0x002UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR1_DIVN_2 (0x004UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL3DIVR1_DIVN_3 (0x008UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL3DIVR1_DIVN_4 (0x010UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL3DIVR1_DIVN_5 (0x020UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL3DIVR1_DIVN_6 (0x040UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL3DIVR1_DIVN_7 (0x080UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL3DIVR1_DIVN_8 (0x100UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL3DIVR1_DIVP_Pos (9U) +#define RCC_PLL3DIVR1_DIVP_Msk (0x7FUL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL3DIVR1_DIVP RCC_PLL3DIVR1_DIVP_Msk /*!< DIVP3[6:0] bits: PLL3 DIVP division factor */ +#define RCC_PLL3DIVR1_DIVP_0 (0x001UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL3DIVR1_DIVP_1 (0x002UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL3DIVR1_DIVP_2 (0x004UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL3DIVR1_DIVP_3 (0x008UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL3DIVR1_DIVP_4 (0x010UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL3DIVR1_DIVP_5 (0x020UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL3DIVR1_DIVP_6 (0x040UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL3DIVR1_DIVQ_Pos (16U) +#define RCC_PLL3DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL3DIVR1_DIVQ RCC_PLL3DIVR1_DIVQ_Msk /*!< DIVQ3[6:0] bits: PLL3 DIVQ division factor */ +#define RCC_PLL3DIVR1_DIVQ_0 (0x001UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL3DIVR1_DIVQ_1 (0x002UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL3DIVR1_DIVQ_2 (0x004UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL3DIVR1_DIVQ_3 (0x008UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL3DIVR1_DIVQ_4 (0x010UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL3DIVR1_DIVQ_5 (0x020UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL3DIVR1_DIVQ_6 (0x040UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL3DIVR1_DIVR_Pos (24U) +#define RCC_PLL3DIVR1_DIVR_Msk (0x7FUL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL3DIVR1_DIVR RCC_PLL3DIVR1_DIVR_Msk /*!< DIVR3[6:0] bits: PLL3 DIVR division factor */ +#define RCC_PLL3DIVR1_DIVR_0 (0x001UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL3DIVR1_DIVR_1 (0x002UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL3DIVR1_DIVR_2 (0x004UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL3DIVR1_DIVR_3 (0x008UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL3DIVR1_DIVR_4 (0x010UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL3DIVR1_DIVR_5 (0x020UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL3DIVR1_DIVR_6 (0x040UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3FRACR register *************/ +#define RCC_PLL3FRACR_FRACN_Pos (3U) +#define RCC_PLL3FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL3FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL3FRACR_FRACN RCC_PLL3FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_CCIPR1 register **************/ +#define RCC_CCIPR1_FMCSEL_Pos (0U) +#define RCC_CCIPR1_FMCSEL_Msk (0x3UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR1_FMCSEL RCC_CCIPR1_FMCSEL_Msk +#define RCC_CCIPR1_FMCSEL_0 (0x1UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR1_FMCSEL_1 (0x2UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR1_SDMMC12SEL_Pos (2U) +#define RCC_CCIPR1_SDMMC12SEL_Msk (0x1UL << RCC_CCIPR1_SDMMC12SEL_Pos) /*!< 0x00000004 */ +#define RCC_CCIPR1_SDMMC12SEL RCC_CCIPR1_SDMMC12SEL_Msk + +#define RCC_CCIPR1_XSPI1SEL_Pos (4U) +#define RCC_CCIPR1_XSPI1SEL_Msk (0x3UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000030 */ +#define RCC_CCIPR1_XSPI1SEL RCC_CCIPR1_XSPI1SEL_Msk +#define RCC_CCIPR1_XSPI1SEL_0 (0x1UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR1_XSPI1SEL_1 (0x2UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000020 */ + +#define RCC_CCIPR1_XSPI2SEL_Pos (6U) +#define RCC_CCIPR1_XSPI2SEL_Msk (0x3UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x000000C0 */ +#define RCC_CCIPR1_XSPI2SEL RCC_CCIPR1_XSPI2SEL_Msk +#define RCC_CCIPR1_XSPI2SEL_0 (0x1UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000040 */ +#define RCC_CCIPR1_XSPI2SEL_1 (0x2UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000080 */ + +#define RCC_CCIPR1_USBREFCKSEL_Pos (8U) +#define RCC_CCIPR1_USBREFCKSEL_Msk (0xFUL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000F00 */ +#define RCC_CCIPR1_USBREFCKSEL RCC_CCIPR1_USBREFCKSEL_Msk +#define RCC_CCIPR1_USBREFCKSEL_0 (0x1UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR1_USBREFCKSEL_1 (0x2UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR1_USBREFCKSEL_2 (0x4UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000400 */ +#define RCC_CCIPR1_USBREFCKSEL_3 (0x8UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000800 */ + +#define RCC_CCIPR1_USBPHYCSEL_Pos (12U) +#define RCC_CCIPR1_USBPHYCSEL_Msk (0x3UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR1_USBPHYCSEL RCC_CCIPR1_USBPHYCSEL_Msk +#define RCC_CCIPR1_USBPHYCSEL_0 (0x1UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR1_USBPHYCSEL_1 (0x2UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR1_OTGFSSEL_Pos (14U) +#define RCC_CCIPR1_OTGFSSEL_Msk (0x3UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CCIPR1_OTGFSSEL RCC_CCIPR1_OTGFSSEL_Msk +#define RCC_CCIPR1_OTGFSSEL_0 (0x1UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00004000 */ +#define RCC_CCIPR1_OTGFSSEL_1 (0x2UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00008000 */ + +#define RCC_CCIPR1_ETH1REFCKSEL_Pos (16U) +#define RCC_CCIPR1_ETH1REFCKSEL_Msk (0x3UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00030000 */ +#define RCC_CCIPR1_ETH1REFCKSEL RCC_CCIPR1_ETH1REFCKSEL_Msk +#define RCC_CCIPR1_ETH1REFCKSEL_0 (0x1UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR1_ETH1REFCKSEL_1 (0x2UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00020000 */ + +#define RCC_CCIPR1_ETH1PHYCKSEL_Pos (18U) +#define RCC_CCIPR1_ETH1PHYCKSEL_Msk (0x1UL << RCC_CCIPR1_ETH1PHYCKSEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR1_ETH1PHYCKSEL RCC_CCIPR1_ETH1PHYCKSEL_Msk + +#define RCC_CCIPR1_ADF1SEL_Pos (20U) +#define RCC_CCIPR1_ADF1SEL_Msk (0x7UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR1_ADF1SEL RCC_CCIPR1_ADF1SEL_Msk +#define RCC_CCIPR1_ADF1SEL_0 (0x1UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR1_ADF1SEL_1 (0x2UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR1_ADF1SEL_2 (0x4UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00400000 */ + +#define RCC_CCIPR1_ADCSEL_Pos (24U) +#define RCC_CCIPR1_ADCSEL_Msk (0x3UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR1_ADCSEL RCC_CCIPR1_ADCSEL_Msk +#define RCC_CCIPR1_ADCSEL_0 (0x1UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR1_ADCSEL_1 (0x2UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR1_PSSISEL_Pos (27U) +#define RCC_CCIPR1_PSSISEL_Msk (0x1UL << RCC_CCIPR1_PSSISEL_Pos) /*!< 0x08000000 */ +#define RCC_CCIPR1_PSSISEL RCC_CCIPR1_PSSISEL_Msk + +#define RCC_CCIPR1_CKPERSEL_Pos (28U) +#define RCC_CCIPR1_CKPERSEL_Msk (0x3UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR1_CKPERSEL RCC_CCIPR1_CKPERSEL_Msk +#define RCC_CCIPR1_CKPERSEL_0 (0x1UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR1_CKPERSEL_1 (0x2UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CCIPR2 register *************/ +#define RCC_CCIPR2_UART234578SEL_Pos (0U) +#define RCC_CCIPR2_UART234578SEL_Msk (0x7UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR2_UART234578SEL RCC_CCIPR2_UART234578SEL_Msk +#define RCC_CCIPR2_UART234578SEL_0 (0x1UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR2_UART234578SEL_1 (0x2UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR2_UART234578SEL_2 (0x4UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR2_SPI23SEL_Pos (4U) +#define RCC_CCIPR2_SPI23SEL_Msk (0x7UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR2_SPI23SEL RCC_CCIPR2_SPI23SEL_Msk +#define RCC_CCIPR2_SPI23SEL_0 (0x1UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR2_SPI23SEL_1 (0x2UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR2_SPI23SEL_2 (0x4UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR2_I2C23SEL_Pos (8U) +#define RCC_CCIPR2_I2C23SEL_Msk (0x3UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000300 */ +#define RCC_CCIPR2_I2C23SEL RCC_CCIPR2_I2C23SEL_Msk +#define RCC_CCIPR2_I2C23SEL_0 (0x1UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR2_I2C23SEL_1 (0x2UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000200 */ + +#define RCC_CCIPR2_I2C1_I3C1SEL_Pos (12U) +#define RCC_CCIPR2_I2C1_I3C1SEL_Msk (0x3UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL RCC_CCIPR2_I2C1_I3C1SEL_Msk +#define RCC_CCIPR2_I2C1_I3C1SEL_0 (0x1UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL_1 (0x2UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR2_LPTIM1SEL_Pos (16U) +#define RCC_CCIPR2_LPTIM1SEL_Msk (0x7UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR2_LPTIM1SEL RCC_CCIPR2_LPTIM1SEL_Msk +#define RCC_CCIPR2_LPTIM1SEL_0 (0x1UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR2_LPTIM1SEL_1 (0x2UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR2_LPTIM1SEL_2 (0x4UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR2_FDCANSEL_Pos (22U) +#define RCC_CCIPR2_FDCANSEL_Msk (0x3UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00C00000 */ +#define RCC_CCIPR2_FDCANSEL RCC_CCIPR2_FDCANSEL_Msk +#define RCC_CCIPR2_FDCANSEL_0 (0x1UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00400000 */ +#define RCC_CCIPR2_FDCANSEL_1 (0x2UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00800000 */ + +#define RCC_CCIPR2_SPDIFRXSEL_Pos (24U) +#define RCC_CCIPR2_SPDIFRXSEL_Msk (0x3UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_SPDIFRXSEL RCC_CCIPR2_SPDIFRXSEL_Msk +#define RCC_CCIPR2_SPDIFRXSEL_0 (0x1UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_SPDIFRXSEL_1 (0x2UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR2_CECSEL_Pos (28U) +#define RCC_CCIPR2_CECSEL_Msk (0x3UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_CECSEL RCC_CCIPR2_CECSEL_Msk +#define RCC_CCIPR2_CECSEL_0 (0x1UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_CECSEL_1 (0x2UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_CCIPR3 register *************/ +#define RCC_CCIPR3_USART1SEL_Pos (0U) +#define RCC_CCIPR3_USART1SEL_Msk (0x7UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR3_USART1SEL RCC_CCIPR3_USART1SEL_Msk +#define RCC_CCIPR3_USART1SEL_0 (0x1UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR3_USART1SEL_1 (0x2UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR3_USART1SEL_2 (0x4UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR3_SPI45SEL_Pos (4U) +#define RCC_CCIPR3_SPI45SEL_Msk (0x7UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR3_SPI45SEL RCC_CCIPR3_SPI45SEL_Msk +#define RCC_CCIPR3_SPI45SEL_0 (0x1UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR3_SPI45SEL_1 (0x2UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR3_SPI45SEL_2 (0x4UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR3_SPI1SEL_Pos (8U) +#define RCC_CCIPR3_SPI1SEL_Msk (0x7UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR3_SPI1SEL RCC_CCIPR3_SPI1SEL_Msk +#define RCC_CCIPR3_SPI1SEL_0 (0x1UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR3_SPI1SEL_1 (0x2UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR3_SPI1SEL_2 (0x4UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR3_SAI1SEL_Pos (16U) +#define RCC_CCIPR3_SAI1SEL_Msk (0x7UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR3_SAI1SEL RCC_CCIPR3_SAI1SEL_Msk +#define RCC_CCIPR3_SAI1SEL_0 (0x1UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR3_SAI1SEL_1 (0x2UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR3_SAI1SEL_2 (0x4UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR3_SAI2SEL_Pos (20U) +#define RCC_CCIPR3_SAI2SEL_Msk (0x7UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR3_SAI2SEL RCC_CCIPR3_SAI2SEL_Msk +#define RCC_CCIPR3_SAI2SEL_0 (0x1UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR3_SAI2SEL_1 (0x2UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR3_SAI2SEL_2 (0x4UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00400000 */ + +/******************** Bit definition for RCC_CCIPR4 register ************/ +#define RCC_CCIPR4_LPUART1SEL_Pos (0U) +#define RCC_CCIPR4_LPUART1SEL_Msk (0x7UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR4_LPUART1SEL RCC_CCIPR4_LPUART1SEL_Msk +#define RCC_CCIPR4_LPUART1SEL_0 (0x1UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR4_LPUART1SEL_1 (0x2UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR4_LPUART1SEL_2 (0x4UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR4_SPI6SEL_Pos (4U) +#define RCC_CCIPR4_SPI6SEL_Msk (0x7UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR4_SPI6SEL RCC_CCIPR4_SPI6SEL_Msk +#define RCC_CCIPR4_SPI6SEL_0 (0x1UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR4_SPI6SEL_1 (0x2UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR4_SPI6SEL_2 (0x4UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR4_LPTIM23SEL_Pos (8U) +#define RCC_CCIPR4_LPTIM23SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR4_LPTIM23SEL RCC_CCIPR4_LPTIM23SEL_Msk +#define RCC_CCIPR4_LPTIM23SEL_0 (0x1UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR4_LPTIM23SEL_1 (0x2UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR4_LPTIM23SEL_2 (0x4UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR4_LPTIM45SEL_Pos (12U) +#define RCC_CCIPR4_LPTIM45SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00007000 */ +#define RCC_CCIPR4_LPTIM45SEL RCC_CCIPR4_LPTIM45SEL_Msk +#define RCC_CCIPR4_LPTIM45SEL_0 (0x1UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR4_LPTIM45SEL_1 (0x2UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00002000 */ +#define RCC_CCIPR4_LPTIM45SEL_2 (0x4UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSIRDYIE_Pos (0U) +#define RCC_CIER_LSIRDYIE_Msk (0x1UL << RCC_CIER_LSIRDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (2U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (3U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_CSIRDYIE_Pos (4U) +#define RCC_CIER_CSIRDYIE_Msk (0x1UL << RCC_CIER_CSIRDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_CSIRDYIE RCC_CIER_CSIRDYIE_Msk +#define RCC_CIER_HSI48RDYIE_Pos (5U) +#define RCC_CIER_HSI48RDYIE_Msk (0x1UL << RCC_CIER_HSI48RDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE_Msk +#define RCC_CIER_PLL1RDYIE_Pos (6U) +#define RCC_CIER_PLL1RDYIE_Msk (0x1UL << RCC_CIER_PLL1RDYIE_Pos) /*!< 0x00000040 */ +#define RCC_CIER_PLL1RDYIE RCC_CIER_PLL1RDYIE_Msk +#define RCC_CIER_PLL2RDYIE_Pos (7U) +#define RCC_CIER_PLL2RDYIE_Msk (0x1UL << RCC_CIER_PLL2RDYIE_Pos) /*!< 0x00000080 */ +#define RCC_CIER_PLL2RDYIE RCC_CIER_PLL2RDYIE_Msk +#define RCC_CIER_PLL3RDYIE_Pos (8U) +#define RCC_CIER_PLL3RDYIE_Msk (0x1UL << RCC_CIER_PLL3RDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIER_PLL3RDYIE RCC_CIER_PLL3RDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSIRDYF_Pos (0U) +#define RCC_CIFR_LSIRDYF_Msk (0x1UL << RCC_CIFR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (2U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (3U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_CSIRDYF_Pos (4U) +#define RCC_CIFR_CSIRDYF_Msk (0x1UL << RCC_CIFR_CSIRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_CSIRDYF RCC_CIFR_CSIRDYF_Msk +#define RCC_CIFR_HSI48RDYF_Pos (5U) +#define RCC_CIFR_HSI48RDYF_Msk (0x1UL << RCC_CIFR_HSI48RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF_Msk +#define RCC_CIFR_PLL1RDYF_Pos (6U) +#define RCC_CIFR_PLL1RDYF_Msk (0x1UL << RCC_CIFR_PLL1RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIFR_PLL1RDYF RCC_CIFR_PLL1RDYF_Msk +#define RCC_CIFR_PLL2RDYF_Pos (7U) +#define RCC_CIFR_PLL2RDYF_Msk (0x1UL << RCC_CIFR_PLL2RDYF_Pos) /*!< 0x00000080 */ +#define RCC_CIFR_PLL2RDYF RCC_CIFR_PLL2RDYF_Msk +#define RCC_CIFR_PLL3RDYF_Pos (8U) +#define RCC_CIFR_PLL3RDYF_Msk (0x1UL << RCC_CIFR_PLL3RDYF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_PLL3RDYF RCC_CIFR_PLL3RDYF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_HSECSSF_Pos (10U) +#define RCC_CIFR_HSECSSF_Msk (0x1UL << RCC_CIFR_HSECSSF_Pos) /*!< 0x00000400 */ +#define RCC_CIFR_HSECSSF RCC_CIFR_HSECSSF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSIRDYC_Pos (0U) +#define RCC_CICR_LSIRDYC_Msk (0x1UL << RCC_CICR_LSIRDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (2U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (3U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_CSIRDYC_Pos (4U) +#define RCC_CICR_CSIRDYC_Msk (0x1UL << RCC_CICR_CSIRDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_CSIRDYC RCC_CICR_CSIRDYC_Msk +#define RCC_CICR_HSI48RDYC_Pos (5U) +#define RCC_CICR_HSI48RDYC_Msk (0x1UL << RCC_CICR_HSI48RDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC_Msk +#define RCC_CICR_PLL1RDYC_Pos (6U) +#define RCC_CICR_PLL1RDYC_Msk (0x1UL << RCC_CICR_PLL1RDYC_Pos) /*!< 0x00000040 */ +#define RCC_CICR_PLL1RDYC RCC_CICR_PLL1RDYC_Msk +#define RCC_CICR_PLL2RDYC_Pos (7U) +#define RCC_CICR_PLL2RDYC_Msk (0x1UL << RCC_CICR_PLL2RDYC_Pos) /*!< 0x00000080 */ +#define RCC_CICR_PLL2RDYC RCC_CICR_PLL2RDYC_Msk +#define RCC_CICR_PLL3RDYC_Pos (8U) +#define RCC_CICR_PLL3RDYC_Msk (0x1UL << RCC_CICR_PLL3RDYC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_PLL3RDYC RCC_CICR_PLL3RDYC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_HSECSSC_Pos (10U) +#define RCC_CICR_HSECSSC_Msk (0x1UL << RCC_CICR_HSECSSC_Pos) /*!< 0x00000400 */ +#define RCC_CICR_HSECSSC RCC_CICR_HSECSSC_Msk + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk +#define RCC_BDCR_LSEEXT_Pos (7U) +#define RCC_BDCR_LSEEXT_Msk (0x1UL << RCC_BDCR_LSEEXT_Pos) /*!< 0x00000080 */ +#define RCC_BDCR_LSEEXT RCC_BDCR_LSEEXT_Msk +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ +#define RCC_BDCR_LSECSSRA_Pos (12U) +#define RCC_BDCR_LSECSSRA_Msk (0x1UL << RCC_BDCR_LSECSSRA_Pos) /*!< 0x00001000 */ +#define RCC_BDCR_LSECSSRA RCC_BDCR_LSECSSRA_Msk + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk +#define RCC_BDCR_VSWRST_Pos (16U) +#define RCC_BDCR_VSWRST_Msk (0x1UL << RCC_BDCR_VSWRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_VSWRST RCC_BDCR_VSWRST_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_GPDMA1RST_Pos (4U) +#define RCC_AHB1RSTR_GPDMA1RST_Msk (0x1UL << RCC_AHB1RSTR_GPDMA1RST_Pos) /*!< 0x00000010 */ +#define RCC_AHB1RSTR_GPDMA1RST RCC_AHB1RSTR_GPDMA1RST_Msk +#define RCC_AHB1RSTR_ADC12RST_Pos (5U) +#define RCC_AHB1RSTR_ADC12RST_Msk (0x1UL << RCC_AHB1RSTR_ADC12RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB1RSTR_ADC12RST RCC_AHB1RSTR_ADC12RST_Msk +#define RCC_AHB1RSTR_ETH1RST_Pos (15U) +#define RCC_AHB1RSTR_ETH1RST_Msk (0x1UL << RCC_AHB1RSTR_ETH1RST_Pos) /*!< 0x00008000 */ +#define RCC_AHB1RSTR_ETH1RST RCC_AHB1RSTR_ETH1RST_Msk +#define RCC_AHB1RSTR_OTGHSRST_Pos (25U) +#define RCC_AHB1RSTR_OTGHSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGHSRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB1RSTR_OTGHSRST RCC_AHB1RSTR_OTGHSRST_Msk +#define RCC_AHB1RSTR_USBPHYCRST_Pos (26U) +#define RCC_AHB1RSTR_USBPHYCRST_Msk (0x1UL << RCC_AHB1RSTR_USBPHYCRST_Pos) /*!< 0x04000000 */ +#define RCC_AHB1RSTR_USBPHYCRST RCC_AHB1RSTR_USBPHYCRST_Msk +#define RCC_AHB1RSTR_OTGFSRST_Pos (27U) +#define RCC_AHB1RSTR_OTGFSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGFSRST_Pos) /*!< 0x08000000 */ +#define RCC_AHB1RSTR_OTGFSRST RCC_AHB1RSTR_OTGFSRST_Msk +#define RCC_AHB1RSTR_ADF1RST_Pos (31U) +#define RCC_AHB1RSTR_ADF1RST_Msk (0x1UL << RCC_AHB1RSTR_ADF1RST_Pos) /*!< 0x80000000 */ +#define RCC_AHB1RSTR_ADF1RST RCC_AHB1RSTR_ADF1RST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register **************/ +#define RCC_AHB2RSTR_PSSIRST_Pos (1U) +#define RCC_AHB2RSTR_PSSIRST_Msk (0x1UL << RCC_AHB2RSTR_PSSIRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_PSSIRST RCC_AHB2RSTR_PSSIRST_Msk +#define RCC_AHB2RSTR_SDMMC2RST_Pos (9U) +#define RCC_AHB2RSTR_SDMMC2RST_Msk (0x1UL << RCC_AHB2RSTR_SDMMC2RST_Pos) /*!< 0x00000200 */ +#define RCC_AHB2RSTR_SDMMC2RST RCC_AHB2RSTR_SDMMC2RST_Msk +#define RCC_AHB2RSTR_CORDICRST_Pos (14U) +#define RCC_AHB2RSTR_CORDICRST_Msk (0x1UL << RCC_AHB2RSTR_CORDICRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB2RSTR_CORDICRST RCC_AHB2RSTR_CORDICRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register **************/ +#define RCC_AHB3RSTR_RNGRST_Pos (0U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00000001 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HASHRST_Pos (1U) +#define RCC_AHB3RSTR_HASHRST_Msk (0x1UL << RCC_AHB3RSTR_HASHRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB3RSTR_HASHRST RCC_AHB3RSTR_HASHRST_Msk +#define RCC_AHB3RSTR_PKARST_Pos (6U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00000040 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk + +/******************** Bit definition for RCC_AHB4RSTR register **************/ +#define RCC_AHB4RSTR_GPIOARST_Pos (0U) +#define RCC_AHB4RSTR_GPIOARST_Msk (0x1UL << RCC_AHB4RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB4RSTR_GPIOARST RCC_AHB4RSTR_GPIOARST_Msk +#define RCC_AHB4RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB4RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB4RSTR_GPIOBRST RCC_AHB4RSTR_GPIOBRST_Msk +#define RCC_AHB4RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB4RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB4RSTR_GPIOCRST RCC_AHB4RSTR_GPIOCRST_Msk +#define RCC_AHB4RSTR_GPIODRST_Pos (3U) +#define RCC_AHB4RSTR_GPIODRST_Msk (0x1UL << RCC_AHB4RSTR_GPIODRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB4RSTR_GPIODRST RCC_AHB4RSTR_GPIODRST_Msk +#define RCC_AHB4RSTR_GPIOERST_Pos (4U) +#define RCC_AHB4RSTR_GPIOERST_Msk (0x1UL << RCC_AHB4RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB4RSTR_GPIOERST RCC_AHB4RSTR_GPIOERST_Msk +#define RCC_AHB4RSTR_GPIOFRST_Pos (5U) +#define RCC_AHB4RSTR_GPIOFRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOFRST_Pos) /*!< 0x00000020 */ +#define RCC_AHB4RSTR_GPIOFRST RCC_AHB4RSTR_GPIOFRST_Msk +#define RCC_AHB4RSTR_GPIOGRST_Pos (6U) +#define RCC_AHB4RSTR_GPIOGRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOGRST_Pos) /*!< 0x00000040 */ +#define RCC_AHB4RSTR_GPIOGRST RCC_AHB4RSTR_GPIOGRST_Msk +#define RCC_AHB4RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB4RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB4RSTR_GPIOHRST RCC_AHB4RSTR_GPIOHRST_Msk +#define RCC_AHB4RSTR_GPIOMRST_Pos (12U) +#define RCC_AHB4RSTR_GPIOMRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOMRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB4RSTR_GPIOMRST RCC_AHB4RSTR_GPIOMRST_Msk +#define RCC_AHB4RSTR_GPIONRST_Pos (13U) +#define RCC_AHB4RSTR_GPIONRST_Msk (0x1UL << RCC_AHB4RSTR_GPIONRST_Pos) /*!< 0x00002000 */ +#define RCC_AHB4RSTR_GPIONRST RCC_AHB4RSTR_GPIONRST_Msk +#define RCC_AHB4RSTR_GPIOORST_Pos (14U) +#define RCC_AHB4RSTR_GPIOORST_Msk (0x1UL << RCC_AHB4RSTR_GPIOORST_Pos) /*!< 0x00004000 */ +#define RCC_AHB4RSTR_GPIOORST RCC_AHB4RSTR_GPIOORST_Msk +#define RCC_AHB4RSTR_GPIOPRST_Pos (15U) +#define RCC_AHB4RSTR_GPIOPRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOPRST_Pos) /*!< 0x00008000 */ +#define RCC_AHB4RSTR_GPIOPRST RCC_AHB4RSTR_GPIOPRST_Msk +#define RCC_AHB4RSTR_CRCRST_Pos (19U) +#define RCC_AHB4RSTR_CRCRST_Msk (0x1UL << RCC_AHB4RSTR_CRCRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB4RSTR_CRCRST RCC_AHB4RSTR_CRCRST_Msk + +/******************** Bit definition for RCC_AHB5RSTR register **************/ +#define RCC_AHB5RSTR_HPDMA1RST_Pos (0U) +#define RCC_AHB5RSTR_HPDMA1RST_Msk (0x1UL << RCC_AHB5RSTR_HPDMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB5RSTR_HPDMA1RST RCC_AHB5RSTR_HPDMA1RST_Msk +#define RCC_AHB5RSTR_DMA2DRST_Pos (1U) +#define RCC_AHB5RSTR_DMA2DRST_Msk (0x1UL << RCC_AHB5RSTR_DMA2DRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB5RSTR_DMA2DRST RCC_AHB5RSTR_DMA2DRST_Msk +#define RCC_AHB5RSTR_JPEGRST_Pos (3U) +#define RCC_AHB5RSTR_JPEGRST_Msk (0x1UL << RCC_AHB5RSTR_JPEGRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB5RSTR_JPEGRST RCC_AHB5RSTR_JPEGRST_Msk +#define RCC_AHB5RSTR_FMCRST_Pos (4U) +#define RCC_AHB5RSTR_FMCRST_Msk (0x1UL << RCC_AHB5RSTR_FMCRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB5RSTR_FMCRST RCC_AHB5RSTR_FMCRST_Msk +#define RCC_AHB5RSTR_XSPI1RST_Pos (5U) +#define RCC_AHB5RSTR_XSPI1RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI1RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB5RSTR_XSPI1RST RCC_AHB5RSTR_XSPI1RST_Msk +#define RCC_AHB5RSTR_SDMMC1RST_Pos (8U) +#define RCC_AHB5RSTR_SDMMC1RST_Msk (0x1UL << RCC_AHB5RSTR_SDMMC1RST_Pos) /*!< 0x00000100 */ +#define RCC_AHB5RSTR_SDMMC1RST RCC_AHB5RSTR_SDMMC1RST_Msk +#define RCC_AHB5RSTR_XSPI2RST_Pos (12U) +#define RCC_AHB5RSTR_XSPI2RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI2RST_Pos) /*!< 0x00001000 */ +#define RCC_AHB5RSTR_XSPI2RST RCC_AHB5RSTR_XSPI2RST_Msk +#define RCC_AHB5RSTR_XSPIMRST_Pos (14U) +#define RCC_AHB5RSTR_XSPIMRST_Msk (0x1UL << RCC_AHB5RSTR_XSPIMRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB5RSTR_XSPIMRST RCC_AHB5RSTR_XSPIMRST_Msk +#define RCC_AHB5RSTR_GFXMMURST_Pos (19U) +#define RCC_AHB5RSTR_GFXMMURST_Msk (0x1UL << RCC_AHB5RSTR_GFXMMURST_Pos) /*!< 0x00080000 */ +#define RCC_AHB5RSTR_GFXMMURST RCC_AHB5RSTR_GFXMMURST_Msk +#define RCC_AHB5RSTR_GPU2DRST_Pos (20U) +#define RCC_AHB5RSTR_GPU2DRST_Msk (0x1UL << RCC_AHB5RSTR_GPU2DRST_Pos) /*!< 0x00100000 */ +#define RCC_AHB5RSTR_GPU2DRST RCC_AHB5RSTR_GPU2DRST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register *************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_TIM3RST_Pos (1U) +#define RCC_APB1RSTR1_TIM3RST_Msk (0x1UL << RCC_APB1RSTR1_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR1_TIM3RST RCC_APB1RSTR1_TIM3RST_Msk +#define RCC_APB1RSTR1_TIM4RST_Pos (2U) +#define RCC_APB1RSTR1_TIM4RST_Msk (0x1UL << RCC_APB1RSTR1_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR1_TIM4RST RCC_APB1RSTR1_TIM4RST_Msk +#define RCC_APB1RSTR1_TIM5RST_Pos (3U) +#define RCC_APB1RSTR1_TIM5RST_Msk (0x1UL << RCC_APB1RSTR1_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR1_TIM5RST RCC_APB1RSTR1_TIM5RST_Msk +#define RCC_APB1RSTR1_TIM6RST_Pos (4U) +#define RCC_APB1RSTR1_TIM6RST_Msk (0x1UL << RCC_APB1RSTR1_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR1_TIM6RST RCC_APB1RSTR1_TIM6RST_Msk +#define RCC_APB1RSTR1_TIM7RST_Pos (5U) +#define RCC_APB1RSTR1_TIM7RST_Msk (0x1UL << RCC_APB1RSTR1_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR1_TIM7RST RCC_APB1RSTR1_TIM7RST_Msk +#define RCC_APB1RSTR1_TIM12RST_Pos (6U) +#define RCC_APB1RSTR1_TIM12RST_Msk (0x1UL << RCC_APB1RSTR1_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR1_TIM12RST RCC_APB1RSTR1_TIM12RST_Msk +#define RCC_APB1RSTR1_TIM13RST_Pos (7U) +#define RCC_APB1RSTR1_TIM13RST_Msk (0x1UL << RCC_APB1RSTR1_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR1_TIM13RST RCC_APB1RSTR1_TIM13RST_Msk +#define RCC_APB1RSTR1_TIM14RST_Pos (8U) +#define RCC_APB1RSTR1_TIM14RST_Msk (0x1UL << RCC_APB1RSTR1_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR1_TIM14RST RCC_APB1RSTR1_TIM14RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (9U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk +#define RCC_APB1RSTR1_SPI2RST_Pos (14U) +#define RCC_APB1RSTR1_SPI2RST_Msk (0x1UL << RCC_APB1RSTR1_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR1_SPI2RST RCC_APB1RSTR1_SPI2RST_Msk +#define RCC_APB1RSTR1_SPI3RST_Pos (15U) +#define RCC_APB1RSTR1_SPI3RST_Msk (0x1UL << RCC_APB1RSTR1_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR1_SPI3RST RCC_APB1RSTR1_SPI3RST_Msk +#define RCC_APB1RSTR1_SPDIFRXRST_Pos (16U) +#define RCC_APB1RSTR1_SPDIFRXRST_Msk (0x1UL << RCC_APB1RSTR1_SPDIFRXRST_Pos) /*!< 0x00010000 */ +#define RCC_APB1RSTR1_SPDIFRXRST RCC_APB1RSTR1_SPDIFRXRST_Msk +#define RCC_APB1RSTR1_USART2RST_Pos (17U) +#define RCC_APB1RSTR1_USART2RST_Msk (0x1UL << RCC_APB1RSTR1_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR1_USART2RST RCC_APB1RSTR1_USART2RST_Msk +#define RCC_APB1RSTR1_USART3RST_Pos (18U) +#define RCC_APB1RSTR1_USART3RST_Msk (0x1UL << RCC_APB1RSTR1_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR1_USART3RST RCC_APB1RSTR1_USART3RST_Msk +#define RCC_APB1RSTR1_UART4RST_Pos (19U) +#define RCC_APB1RSTR1_UART4RST_Msk (0x1UL << RCC_APB1RSTR1_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR1_UART4RST RCC_APB1RSTR1_UART4RST_Msk +#define RCC_APB1RSTR1_UART5RST_Pos (20U) +#define RCC_APB1RSTR1_UART5RST_Msk (0x1UL << RCC_APB1RSTR1_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR1_UART5RST RCC_APB1RSTR1_UART5RST_Msk +#define RCC_APB1RSTR1_I2C1_I3C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1_I3C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1_I3C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1_I3C1RST RCC_APB1RSTR1_I2C1_I3C1RST_Msk +#define RCC_APB1RSTR1_I2C2RST_Pos (22U) +#define RCC_APB1RSTR1_I2C2RST_Msk (0x1UL << RCC_APB1RSTR1_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR1_I2C2RST RCC_APB1RSTR1_I2C2RST_Msk +#define RCC_APB1RSTR1_I2C3RST_Pos (23U) +#define RCC_APB1RSTR1_I2C3RST_Msk (0x1UL << RCC_APB1RSTR1_I2C3RST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR1_I2C3RST RCC_APB1RSTR1_I2C3RST_Msk +#define RCC_APB1RSTR1_CECRST_Pos (27U) +#define RCC_APB1RSTR1_CECRST_Msk (0x1UL << RCC_APB1RSTR1_CECRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR1_CECRST RCC_APB1RSTR1_CECRST_Msk +#define RCC_APB1RSTR1_UART7RST_Pos (30U) +#define RCC_APB1RSTR1_UART7RST_Msk (0x1UL << RCC_APB1RSTR1_UART7RST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR1_UART7RST RCC_APB1RSTR1_UART7RST_Msk +#define RCC_APB1RSTR1_UART8RST_Pos (31U) +#define RCC_APB1RSTR1_UART8RST_Msk (0x1UL << RCC_APB1RSTR1_UART8RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_UART8RST RCC_APB1RSTR1_UART8RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register *************/ +#define RCC_APB1RSTR2_CRSRST_Pos (1U) +#define RCC_APB1RSTR2_CRSRST_Msk (0x1UL << RCC_APB1RSTR2_CRSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR2_CRSRST RCC_APB1RSTR2_CRSRST_Msk +#define RCC_APB1RSTR2_MDIOSRST_Pos (5U) +#define RCC_APB1RSTR2_MDIOSRST_Msk (0x1UL << RCC_APB1RSTR2_MDIOSRST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_MDIOSRST RCC_APB1RSTR2_MDIOSRST_Msk +#define RCC_APB1RSTR2_FDCANRST_Pos (8U) +#define RCC_APB1RSTR2_FDCANRST_Msk (0x1UL << RCC_APB1RSTR2_FDCANRST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR2_FDCANRST RCC_APB1RSTR2_FDCANRST_Msk +#define RCC_APB1RSTR2_UCPD1RST_Pos (27U) +#define RCC_APB1RSTR2_UCPD1RST_Msk (0x1UL << RCC_APB1RSTR2_UCPD1RST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR2_UCPD1RST RCC_APB1RSTR2_UCPD1RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_TIM1RST_Pos (0U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (4U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_SPI4RST_Pos (13U) +#define RCC_APB2RSTR_SPI4RST_Msk (0x1UL << RCC_APB2RSTR_SPI4RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_SPI4RST RCC_APB2RSTR_SPI4RST_Msk +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk +#define RCC_APB2RSTR_SPI5RST_Pos (20U) +#define RCC_APB2RSTR_SPI5RST_Msk (0x1UL << RCC_APB2RSTR_SPI5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_SPI5RST RCC_APB2RSTR_SPI5RST_Msk +#define RCC_APB2RSTR_SAI1RST_Pos (22U) +#define RCC_APB2RSTR_SAI1RST_Msk (0x1UL << RCC_APB2RSTR_SAI1RST_Pos) /*!< 0x00400000 */ +#define RCC_APB2RSTR_SAI1RST RCC_APB2RSTR_SAI1RST_Msk +#define RCC_APB2RSTR_SAI2RST_Pos (23U) +#define RCC_APB2RSTR_SAI2RST_Msk (0x1UL << RCC_APB2RSTR_SAI2RST_Pos) /*!< 0x00800000 */ +#define RCC_APB2RSTR_SAI2RST RCC_APB2RSTR_SAI2RST_Msk + +/******************** Bit definition for RCC_APB4RSTR register **************/ +#define RCC_APB4RSTR_SBSRST_Pos (1U) +#define RCC_APB4RSTR_SBSRST_Msk (0x1UL << RCC_APB4RSTR_SBSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB4RSTR_SBSRST RCC_APB4RSTR_SBSRST_Msk +#define RCC_APB4RSTR_LPUART1RST_Pos (3U) +#define RCC_APB4RSTR_LPUART1RST_Msk (0x1UL << RCC_APB4RSTR_LPUART1RST_Pos) /*!< 0x00000008 */ +#define RCC_APB4RSTR_LPUART1RST RCC_APB4RSTR_LPUART1RST_Msk +#define RCC_APB4RSTR_SPI6RST_Pos (5U) +#define RCC_APB4RSTR_SPI6RST_Msk (0x1UL << RCC_APB4RSTR_SPI6RST_Pos) /*!< 0x00000020 */ +#define RCC_APB4RSTR_SPI6RST RCC_APB4RSTR_SPI6RST_Msk +#define RCC_APB4RSTR_LPTIM2RST_Pos (9U) +#define RCC_APB4RSTR_LPTIM2RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM2RST_Pos) /*!< 0x00000200 */ +#define RCC_APB4RSTR_LPTIM2RST RCC_APB4RSTR_LPTIM2RST_Msk +#define RCC_APB4RSTR_LPTIM3RST_Pos (10U) +#define RCC_APB4RSTR_LPTIM3RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM3RST_Pos) /*!< 0x00000400 */ +#define RCC_APB4RSTR_LPTIM3RST RCC_APB4RSTR_LPTIM3RST_Msk +#define RCC_APB4RSTR_LPTIM4RST_Pos (11U) +#define RCC_APB4RSTR_LPTIM4RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM4RST_Pos) /*!< 0x00000800 */ +#define RCC_APB4RSTR_LPTIM4RST RCC_APB4RSTR_LPTIM4RST_Msk +#define RCC_APB4RSTR_LPTIM5RST_Pos (12U) +#define RCC_APB4RSTR_LPTIM5RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM5RST_Pos) /*!< 0x00001000 */ +#define RCC_APB4RSTR_LPTIM5RST RCC_APB4RSTR_LPTIM5RST_Msk +#define RCC_APB4RSTR_VREFRST_Pos (15U) +#define RCC_APB4RSTR_VREFRST_Msk (0x1UL << RCC_APB4RSTR_VREFRST_Pos) /*!< 0x00008000 */ +#define RCC_APB4RSTR_VREFRST RCC_APB4RSTR_VREFRST_Msk +#define RCC_APB4RSTR_DTSRST_Pos (26U) +#define RCC_APB4RSTR_DTSRST_Msk (0x1UL << RCC_APB4RSTR_DTSRST_Pos) /*!< 0x04000000 */ +#define RCC_APB4RSTR_DTSRST RCC_APB4RSTR_DTSRST_Msk + +/******************** Bit definition for RCC_APB5RSTR register **************/ +#define RCC_APB5RSTR_LTDCRST_Pos (1U) +#define RCC_APB5RSTR_LTDCRST_Msk (0x1UL << RCC_APB5RSTR_LTDCRST_Pos) /*!< 0x00000002 */ +#define RCC_APB5RSTR_LTDCRST RCC_APB5RSTR_LTDCRST_Msk +#define RCC_APB5RSTR_DCMIPPRST_Pos (2U) +#define RCC_APB5RSTR_DCMIPPRST_Msk (0x1UL << RCC_APB5RSTR_DCMIPPRST_Pos) /*!< 0x00000004 */ +#define RCC_APB5RSTR_DCMIPPRST RCC_APB5RSTR_DCMIPPRST_Msk +#define RCC_APB5RSTR_GFXTIMRST_Pos (4U) +#define RCC_APB5RSTR_GFXTIMRST_Msk (0x1UL << RCC_APB5RSTR_GFXTIMRST_Pos) /*!< 0x00000010 */ +#define RCC_APB5RSTR_GFXTIMRST RCC_APB5RSTR_GFXTIMRST_Msk + +/******************** Bit definition for RCC_CKGDISR register ***************/ +#define RCC_CKGDISR_AXICKG_Pos (0U) +#define RCC_CKGDISR_AXICKG_Msk (0x1UL << RCC_CKGDISR_AXICKG_Pos) /*!< 0x00000001 */ +#define RCC_CKGDISR_AXICKG RCC_CKGDISR_AXICKG_Msk +#define RCC_CKGDISR_AHBMCKG_Pos (1U) +#define RCC_CKGDISR_AHBMCKG_Msk (0x1UL << RCC_CKGDISR_AHBMCKG_Pos) /*!< 0x00000002 */ +#define RCC_CKGDISR_AHBMCKG RCC_CKGDISR_AHBMCKG_Msk +#define RCC_CKGDISR_SDMMC1CKG_Pos (2U) +#define RCC_CKGDISR_SDMMC1CKG_Msk (0x1UL << RCC_CKGDISR_SDMMC1CKG_Pos) /*!< 0x00000004 */ +#define RCC_CKGDISR_SDMMC1CKG RCC_CKGDISR_SDMMC1CKG_Msk +#define RCC_CKGDISR_HPDMA1CKG_Pos (3U) +#define RCC_CKGDISR_HPDMA1CKG_Msk (0x1UL << RCC_CKGDISR_HPDMA1CKG_Pos) /*!< 0x00000008 */ +#define RCC_CKGDISR_HPDMA1CKG RCC_CKGDISR_HPDMA1CKG_Msk +#define RCC_CKGDISR_CPUCKG_Pos (4U) +#define RCC_CKGDISR_CPUCKG_Msk (0x1UL << RCC_CKGDISR_CPUCKG_Pos) /*!< 0x00000010 */ +#define RCC_CKGDISR_CPUCKG RCC_CKGDISR_CPUCKG_Msk +#define RCC_CKGDISR_GPU2DS0CKG_Pos (5U) +#define RCC_CKGDISR_GPU2DS0CKG_Msk (0x1UL << RCC_CKGDISR_GPU2DS0CKG_Pos) /*!< 0x00000020 */ +#define RCC_CKGDISR_GPU2DS0CKG RCC_CKGDISR_GPU2DS0CKG_Msk +#define RCC_CKGDISR_GPU2DS1CKG_Pos (6U) +#define RCC_CKGDISR_GPU2DS1CKG_Msk (0x1UL << RCC_CKGDISR_GPU2DS1CKG_Pos) /*!< 0x00000040 */ +#define RCC_CKGDISR_GPU2DS1CKG RCC_CKGDISR_GPU2DS1CKG_Msk +#define RCC_CKGDISR_GPU2DCLCKG_Pos (7U) +#define RCC_CKGDISR_GPU2DCLCKG_Msk (0x1UL << RCC_CKGDISR_GPU2DCLCKG_Pos) /*!< 0x00000080 */ +#define RCC_CKGDISR_GPU2DCLCKG RCC_CKGDISR_GPU2DCLCKG_Msk +#define RCC_CKGDISR_DCMIPPCKG_Pos (8U) +#define RCC_CKGDISR_DCMIPPCKG_Msk (0x1UL << RCC_CKGDISR_DCMIPPCKG_Pos) /*!< 0x00000100 */ +#define RCC_CKGDISR_DCMIPPCKG RCC_CKGDISR_DCMIPPCKG_Msk +#define RCC_CKGDISR_DMA2DCKG_Pos (9U) +#define RCC_CKGDISR_DMA2DCKG_Msk (0x1UL << RCC_CKGDISR_DMA2DCKG_Pos) /*!< 0x00000200 */ +#define RCC_CKGDISR_DMA2DCKG RCC_CKGDISR_DMA2DCKG_Msk +#define RCC_CKGDISR_GFXMMUSCKG_Pos (10U) +#define RCC_CKGDISR_GFXMMUSCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUSCKG_Pos) /*!< 0x00000400 */ +#define RCC_CKGDISR_GFXMMUSCKG RCC_CKGDISR_GFXMMUSCKG_Msk +#define RCC_CKGDISR_LTDCCKG_Pos (11U) +#define RCC_CKGDISR_LTDCCKG_Msk (0x1UL << RCC_CKGDISR_LTDCCKG_Pos) /*!< 0x00000800 */ +#define RCC_CKGDISR_LTDCCKG RCC_CKGDISR_LTDCCKG_Msk +#define RCC_CKGDISR_GFXMMUMCKG_Pos (12U) +#define RCC_CKGDISR_GFXMMUMCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUMCKG_Pos) /*!< 0x00001000 */ +#define RCC_CKGDISR_GFXMMUMCKG RCC_CKGDISR_GFXMMUMCKG_Msk +#define RCC_CKGDISR_AHBSCKG_Pos (13U) +#define RCC_CKGDISR_AHBSCKG_Msk (0x1UL << RCC_CKGDISR_AHBSCKG_Pos) /*!< 0x00002000 */ +#define RCC_CKGDISR_AHBSCKG RCC_CKGDISR_AHBSCKG_Msk +#define RCC_CKGDISR_FMCCKG_Pos (14U) +#define RCC_CKGDISR_FMCCKG_Msk (0x1UL << RCC_CKGDISR_FMCCKG_Pos) /*!< 0x00004000 */ +#define RCC_CKGDISR_FMCCKG RCC_CKGDISR_FMCCKG_Msk +#define RCC_CKGDISR_XSPI1CKG_Pos (15U) +#define RCC_CKGDISR_XSPI1CKG_Msk (0x1UL << RCC_CKGDISR_XSPI1CKG_Pos) /*!< 0x00008000 */ +#define RCC_CKGDISR_XSPI1CKG RCC_CKGDISR_XSPI1CKG_Msk +#define RCC_CKGDISR_XSPI2CKG_Pos (16U) +#define RCC_CKGDISR_XSPI2CKG_Msk (0x1UL << RCC_CKGDISR_XSPI2CKG_Pos) /*!< 0x00010000 */ +#define RCC_CKGDISR_XSPI2CKG RCC_CKGDISR_XSPI2CKG_Msk +#define RCC_CKGDISR_AXISRAM4CKG_Pos (17U) +#define RCC_CKGDISR_AXISRAM4CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM4CKG_Pos) /*!< 0x00020000 */ +#define RCC_CKGDISR_AXISRAM4CKG RCC_CKGDISR_AXISRAM4CKG_Msk +#define RCC_CKGDISR_AXISRAM3CKG_Pos (18U) +#define RCC_CKGDISR_AXISRAM3CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM3CKG_Pos) /*!< 0x00040000 */ +#define RCC_CKGDISR_AXISRAM3CKG RCC_CKGDISR_AXISRAM3CKG_Msk +#define RCC_CKGDISR_AXISRAM2CKG_Pos (19U) +#define RCC_CKGDISR_AXISRAM2CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM2CKG_Pos) /*!< 0x00080000 */ +#define RCC_CKGDISR_AXISRAM2CKG RCC_CKGDISR_AXISRAM2CKG_Msk +#define RCC_CKGDISR_AXISRAM1CKG_Pos (20U) +#define RCC_CKGDISR_AXISRAM1CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM1CKG_Pos) /*!< 0x00100000 */ +#define RCC_CKGDISR_AXISRAM1CKG RCC_CKGDISR_AXISRAM1CKG_Msk +#define RCC_CKGDISR_FLASHCKG_Pos (21U) +#define RCC_CKGDISR_FLASHCKG_Msk (0x1UL << RCC_CKGDISR_FLASHCKG_Pos) /*!< 0x00200000 */ +#define RCC_CKGDISR_FLASHCKG RCC_CKGDISR_FLASHCKG_Msk +#define RCC_CKGDISR_EXTICKG_Pos (30U) +#define RCC_CKGDISR_EXTICKG_Msk (0x1UL << RCC_CKGDISR_EXTICKG_Pos) /*!< 0x40000000 */ +#define RCC_CKGDISR_EXTICKG RCC_CKGDISR_EXTICKG_Msk +#define RCC_CKGDISR_JTAGCKG_Pos (31U) +#define RCC_CKGDISR_JTAGCKG_Msk (0x1UL << RCC_CKGDISR_JTAGCKG_Pos) /*!< 0x80000000 */ +#define RCC_CKGDISR_JTAGCKG RCC_CKGDISR_JTAGCKG_Msk + +/******************** Bit definition for RCC_PLL1DIVR2 register *************/ +#define RCC_PLL1DIVR2_DIVS_Pos (0U) +#define RCC_PLL1DIVR2_DIVS_Msk (0x7UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL1DIVR2_DIVS RCC_PLL1DIVR2_DIVS_Msk /*!< DIVS1[2:0] bits: PLL1 DIVS division factor */ +#define RCC_PLL1DIVR2_DIVS_0 (0x1UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR2_DIVS_1 (0x2UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR2_DIVS_2 (0x4UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL2DIVR2 register *************/ +#define RCC_PLL2DIVR2_DIVS_Pos (0U) +#define RCC_PLL2DIVR2_DIVS_Msk (0x7UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL2DIVR2_DIVS RCC_PLL2DIVR2_DIVS_Msk /*!< DIVS2[2:0] bits: PLL2 DIVS division factor */ +#define RCC_PLL2DIVR2_DIVS_0 (0x1UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR2_DIVS_1 (0x2UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR2_DIVS_2 (0x4UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +#define RCC_PLL2DIVR2_DIVT_Pos (8U) +#define RCC_PLL2DIVR2_DIVT_Msk (0x7UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000700 */ +#define RCC_PLL2DIVR2_DIVT RCC_PLL2DIVR2_DIVT_Msk /*!< DIVT2[2:0] bits: PLL2 DIVT division factor */ +#define RCC_PLL2DIVR2_DIVT_0 (0x1UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000100 */ +#define RCC_PLL2DIVR2_DIVT_1 (0x2UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR2_DIVT_2 (0x4UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for RCC_PLL3DIVR2 register *************/ +#define RCC_PLL3DIVR2_DIVS_Pos (0U) +#define RCC_PLL3DIVR2_DIVS_Msk (0x7UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL3DIVR2_DIVS RCC_PLL3DIVR2_DIVS_Msk /*!< DIVS3[2:0] bits: PLL3 DIVS division factor */ +#define RCC_PLL3DIVR2_DIVS_0 (0x1UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR2_DIVS_1 (0x2UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR2_DIVS_2 (0x4UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL1SSCGR register *************/ +#define RCC_PLL1SSCGR_MODPER_Pos (0U) +#define RCC_PLL1SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL1SSCGR_MODPER RCC_PLL1SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL1SSCGR_MODPER_0 (0x0001UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL1SSCGR_MODPER_1 (0x0002UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL1SSCGR_MODPER_2 (0x0004UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL1SSCGR_MODPER_3 (0x0008UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL1SSCGR_MODPER_4 (0x0010UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL1SSCGR_MODPER_5 (0x0020UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL1SSCGR_MODPER_6 (0x0040UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL1SSCGR_MODPER_7 (0x0080UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL1SSCGR_MODPER_8 (0x0100UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL1SSCGR_MODPER_9 (0x0200UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL1SSCGR_MODPER_10 (0x0400UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL1SSCGR_MODPER_11 (0x0800UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL1SSCGR_MODPER_12 (0x1000UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL1SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL1SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL1SSCGR_TPDFNDIS RCC_PLL1SSCGR_TPDFNDIS_Msk +#define RCC_PLL1SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL1SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL1SSCGR_RPDFNDIS RCC_PLL1SSCGR_RPDFNDIS_Msk +#define RCC_PLL1SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL1SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL1SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL1SSCGR_SPREADSEL RCC_PLL1SSCGR_SPREADSEL_Msk +#define RCC_PLL1SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL1SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL1SSCGR_INCSTEP RCC_PLL1SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL1SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL1SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL1SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL1SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL1SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL1SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL1SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL1SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL1SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL1SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL1SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL1SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL1SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL1SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL1SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2SSCGR register *************/ +#define RCC_PLL2SSCGR_MODPER_Pos (0U) +#define RCC_PLL2SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL2SSCGR_MODPER RCC_PLL2SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL2SSCGR_MODPER_0 (0x0001UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL2SSCGR_MODPER_1 (0x0002UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL2SSCGR_MODPER_2 (0x0004UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL2SSCGR_MODPER_3 (0x0008UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL2SSCGR_MODPER_4 (0x0010UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL2SSCGR_MODPER_5 (0x0020UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL2SSCGR_MODPER_6 (0x0040UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL2SSCGR_MODPER_7 (0x0080UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL2SSCGR_MODPER_8 (0x0100UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL2SSCGR_MODPER_9 (0x0200UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL2SSCGR_MODPER_10 (0x0400UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL2SSCGR_MODPER_11 (0x0800UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL2SSCGR_MODPER_12 (0x1000UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL2SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL2SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL2SSCGR_TPDFNDIS RCC_PLL2SSCGR_TPDFNDIS_Msk +#define RCC_PLL2SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL2SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL2SSCGR_RPDFNDIS RCC_PLL2SSCGR_RPDFNDIS_Msk +#define RCC_PLL2SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL2SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL2SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL2SSCGR_SPREADSEL RCC_PLL2SSCGR_SPREADSEL_Msk +#define RCC_PLL2SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL2SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL2SSCGR_INCSTEP RCC_PLL2SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL2SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL2SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL2SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL2SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL2SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL2SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL2SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL2SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL2SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL2SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL2SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL2SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL2SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL2SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL2SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3SSCGR register *************/ +#define RCC_PLL3SSCGR_MODPER_Pos (0U) +#define RCC_PLL3SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL3SSCGR_MODPER RCC_PLL3SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL3SSCGR_MODPER_0 (0x0001UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL3SSCGR_MODPER_1 (0x0002UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL3SSCGR_MODPER_2 (0x0004UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL3SSCGR_MODPER_3 (0x0008UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL3SSCGR_MODPER_4 (0x0010UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL3SSCGR_MODPER_5 (0x0020UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL3SSCGR_MODPER_6 (0x0040UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL3SSCGR_MODPER_7 (0x0080UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL3SSCGR_MODPER_8 (0x0100UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL3SSCGR_MODPER_9 (0x0200UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL3SSCGR_MODPER_10 (0x0400UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL3SSCGR_MODPER_11 (0x0800UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL3SSCGR_MODPER_12 (0x1000UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL3SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL3SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL3SSCGR_TPDFNDIS RCC_PLL3SSCGR_TPDFNDIS_Msk +#define RCC_PLL3SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL3SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL3SSCGR_RPDFNDIS RCC_PLL3SSCGR_RPDFNDIS_Msk +#define RCC_PLL3SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL3SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL3SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL3SSCGR_SPREADSEL RCC_PLL3SSCGR_SPREADSEL_Msk +#define RCC_PLL3SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL3SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL3SSCGR_INCSTEP RCC_PLL3SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL3SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL3SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL3SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL3SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL3SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL3SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL3SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL3SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL3SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL3SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL3SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL3SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL3SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL3SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL3SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CKPROTR register ***************/ +#define RCC_CKPROTR_XSPICKP_Pos (0U) +#define RCC_CKPROTR_XSPICKP_Msk (0x1UL << RCC_CKPROTR_XSPICKP_Pos) /*!< 0x00000001 */ +#define RCC_CKPROTR_XSPICKP RCC_CKPROTR_XSPICKP_Msk +#define RCC_CKPROTR_FMCCKP_Pos (1U) +#define RCC_CKPROTR_FMCCKP_Msk (0x1UL << RCC_CKPROTR_FMCCKP_Pos) /*!< 0x00000002 */ +#define RCC_CKPROTR_FMCCKP RCC_CKPROTR_FMCCKP_Msk +#define RCC_CKPROTR_XSPI1SWP_Pos (4U) +#define RCC_CKPROTR_XSPI1SWP_Msk (0x7UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000070 */ +#define RCC_CKPROTR_XSPI1SWP RCC_CKPROTR_XSPI1SWP_Msk +#define RCC_CKPROTR_XSPI1SWP_0 (0x1UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000010 */ +#define RCC_CKPROTR_XSPI1SWP_1 (0x2UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000020 */ +#define RCC_CKPROTR_XSPI1SWP_2 (0x4UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000040 */ +#define RCC_CKPROTR_XSPI2SWP_Pos (8U) +#define RCC_CKPROTR_XSPI2SWP_Msk (0x7UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000700 */ +#define RCC_CKPROTR_XSPI2SWP RCC_CKPROTR_XSPI2SWP_Msk +#define RCC_CKPROTR_XSPI2SWP_0 (0x1UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000100 */ +#define RCC_CKPROTR_XSPI2SWP_1 (0x2UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000200 */ +#define RCC_CKPROTR_XSPI2SWP_2 (0x4UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000400 */ +#define RCC_CKPROTR_FMCSWP_Pos (12U) +#define RCC_CKPROTR_FMCSWP_Msk (0x7UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00007000 */ +#define RCC_CKPROTR_FMCSWP RCC_CKPROTR_FMCSWP_Msk +#define RCC_CKPROTR_FMCSWP_0 (0x1UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00001000 */ +#define RCC_CKPROTR_FMCSWP_1 (0x2UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00002000 */ +#define RCC_CKPROTR_FMCSWP_2 (0x4UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_RSR register *******************/ +#define RCC_RSR_RMVF_Pos (16U) +#define RCC_RSR_RMVF_Msk (0x1UL << RCC_RSR_RMVF_Pos) /*!< 0x00010000 */ +#define RCC_RSR_RMVF RCC_RSR_RMVF_Msk +#define RCC_RSR_OBLRSTF_Pos (17U) +#define RCC_RSR_OBLRSTF_Msk (0x1UL << RCC_RSR_OBLRSTF_Pos) /*!< 0x00020000 */ +#define RCC_RSR_OBLRSTF RCC_RSR_OBLRSTF_Msk +#define RCC_RSR_BORRSTF_Pos (21U) +#define RCC_RSR_BORRSTF_Msk (0x1UL << RCC_RSR_BORRSTF_Pos) /*!< 0x00200000 */ +#define RCC_RSR_BORRSTF RCC_RSR_BORRSTF_Msk +#define RCC_RSR_PINRSTF_Pos (22U) +#define RCC_RSR_PINRSTF_Msk (0x1UL << RCC_RSR_PINRSTF_Pos) /*!< 0x00400000 */ +#define RCC_RSR_PINRSTF RCC_RSR_PINRSTF_Msk +#define RCC_RSR_PORRSTF_Pos (23U) +#define RCC_RSR_PORRSTF_Msk (0x1UL << RCC_RSR_PORRSTF_Pos) /*!< 0x00800000 */ +#define RCC_RSR_PORRSTF RCC_RSR_PORRSTF_Msk +#define RCC_RSR_SFTRSTF_Pos (24U) +#define RCC_RSR_SFTRSTF_Msk (0x1UL << RCC_RSR_SFTRSTF_Pos) /*!< 0x01000000 */ +#define RCC_RSR_SFTRSTF RCC_RSR_SFTRSTF_Msk +#define RCC_RSR_IWDGRSTF_Pos (26U) +#define RCC_RSR_IWDGRSTF_Msk (0x1UL << RCC_RSR_IWDGRSTF_Pos) /*!< 0x04000000 */ +#define RCC_RSR_IWDGRSTF RCC_RSR_IWDGRSTF_Msk +#define RCC_RSR_WWDGRSTF_Pos (28U) +#define RCC_RSR_WWDGRSTF_Msk (0x1UL << RCC_RSR_WWDGRSTF_Pos) /*!< 0x10000000 */ +#define RCC_RSR_WWDGRSTF RCC_RSR_WWDGRSTF_Msk +#define RCC_RSR_LPWRRSTF_Pos (30U) +#define RCC_RSR_LPWRRSTF_Msk (0x1UL << RCC_RSR_LPWRRSTF_Pos) /*!< 0x40000000 */ +#define RCC_RSR_LPWRRSTF RCC_RSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_AHB1ENR register ***************/ +#define RCC_AHB1ENR_GPDMA1EN_Pos (4U) +#define RCC_AHB1ENR_GPDMA1EN_Msk (0x1UL << RCC_AHB1ENR_GPDMA1EN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1ENR_GPDMA1EN RCC_AHB1ENR_GPDMA1EN_Msk +#define RCC_AHB1ENR_ADC12EN_Pos (5U) +#define RCC_AHB1ENR_ADC12EN_Msk (0x1UL << RCC_AHB1ENR_ADC12EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1ENR_ADC12EN RCC_AHB1ENR_ADC12EN_Msk +#define RCC_AHB1ENR_ETH1MACEN_Pos (15U) +#define RCC_AHB1ENR_ETH1MACEN_Msk (0x1UL << RCC_AHB1ENR_ETH1MACEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1ENR_ETH1MACEN RCC_AHB1ENR_ETH1MACEN_Msk +#define RCC_AHB1ENR_ETH1TXEN_Pos (16U) +#define RCC_AHB1ENR_ETH1TXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1TXEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_ETH1TXEN RCC_AHB1ENR_ETH1TXEN_Msk +#define RCC_AHB1ENR_ETH1RXEN_Pos (17U) +#define RCC_AHB1ENR_ETH1RXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1RXEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1ENR_ETH1RXEN RCC_AHB1ENR_ETH1RXEN_Msk +#define RCC_AHB1ENR_OTGHSEN_Pos (25U) +#define RCC_AHB1ENR_OTGHSEN_Msk (0x1UL << RCC_AHB1ENR_OTGHSEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1ENR_OTGHSEN RCC_AHB1ENR_OTGHSEN_Msk +#define RCC_AHB1ENR_USBPHYCEN_Pos (26U) +#define RCC_AHB1ENR_USBPHYCEN_Msk (0x1UL << RCC_AHB1ENR_USBPHYCEN_Pos) /*!< 0x04000000 */ +#define RCC_AHB1ENR_USBPHYCEN RCC_AHB1ENR_USBPHYCEN_Msk +#define RCC_AHB1ENR_OTGFSEN_Pos (27U) +#define RCC_AHB1ENR_OTGFSEN_Msk (0x1UL << RCC_AHB1ENR_OTGFSEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1ENR_OTGFSEN RCC_AHB1ENR_OTGFSEN_Msk +#define RCC_AHB1ENR_ADF1EN_Pos (31U) +#define RCC_AHB1ENR_ADF1EN_Msk (0x1UL << RCC_AHB1ENR_ADF1EN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1ENR_ADF1EN RCC_AHB1ENR_ADF1EN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_PSSIEN_Pos (1U) +#define RCC_AHB2ENR_PSSIEN_Msk (0x1UL << RCC_AHB2ENR_PSSIEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_PSSIEN RCC_AHB2ENR_PSSIEN_Msk +#define RCC_AHB2ENR_SDMMC2EN_Pos (9U) +#define RCC_AHB2ENR_SDMMC2EN_Msk (0x1UL << RCC_AHB2ENR_SDMMC2EN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2ENR_SDMMC2EN RCC_AHB2ENR_SDMMC2EN_Msk +#define RCC_AHB2ENR_CORDICEN_Pos (14U) +#define RCC_AHB2ENR_CORDICEN_Msk (0x1UL << RCC_AHB2ENR_CORDICEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2ENR_CORDICEN RCC_AHB2ENR_CORDICEN_Msk +#define RCC_AHB2ENR_SRAM1EN_Pos (29U) +#define RCC_AHB2ENR_SRAM1EN_Msk (0x1UL << RCC_AHB2ENR_SRAM1EN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2ENR_SRAM1EN RCC_AHB2ENR_SRAM1EN_Msk +#define RCC_AHB2ENR_SRAM2EN_Pos (30U) +#define RCC_AHB2ENR_SRAM2EN_Msk (0x1UL << RCC_AHB2ENR_SRAM2EN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2ENR_SRAM2EN RCC_AHB2ENR_SRAM2EN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_RNGEN_Pos (0U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HASHEN_Pos (1U) +#define RCC_AHB3ENR_HASHEN_Msk (0x1UL << RCC_AHB3ENR_HASHEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3ENR_HASHEN RCC_AHB3ENR_HASHEN_Msk +#define RCC_AHB3ENR_PKAEN_Pos (6U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk + +/******************** Bit definition for RCC_AHB4ENR register ***************/ +#define RCC_AHB4ENR_GPIOAEN_Pos (0U) +#define RCC_AHB4ENR_GPIOAEN_Msk (0x1UL << RCC_AHB4ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4ENR_GPIOAEN RCC_AHB4ENR_GPIOAEN_Msk +#define RCC_AHB4ENR_GPIOBEN_Pos (1U) +#define RCC_AHB4ENR_GPIOBEN_Msk (0x1UL << RCC_AHB4ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4ENR_GPIOBEN RCC_AHB4ENR_GPIOBEN_Msk +#define RCC_AHB4ENR_GPIOCEN_Pos (2U) +#define RCC_AHB4ENR_GPIOCEN_Msk (0x1UL << RCC_AHB4ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4ENR_GPIOCEN RCC_AHB4ENR_GPIOCEN_Msk +#define RCC_AHB4ENR_GPIODEN_Pos (3U) +#define RCC_AHB4ENR_GPIODEN_Msk (0x1UL << RCC_AHB4ENR_GPIODEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4ENR_GPIODEN RCC_AHB4ENR_GPIODEN_Msk +#define RCC_AHB4ENR_GPIOEEN_Pos (4U) +#define RCC_AHB4ENR_GPIOEEN_Msk (0x1UL << RCC_AHB4ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4ENR_GPIOEEN RCC_AHB4ENR_GPIOEEN_Msk +#define RCC_AHB4ENR_GPIOFEN_Pos (5U) +#define RCC_AHB4ENR_GPIOFEN_Msk (0x1UL << RCC_AHB4ENR_GPIOFEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4ENR_GPIOFEN RCC_AHB4ENR_GPIOFEN_Msk +#define RCC_AHB4ENR_GPIOGEN_Pos (6U) +#define RCC_AHB4ENR_GPIOGEN_Msk (0x1UL << RCC_AHB4ENR_GPIOGEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4ENR_GPIOGEN RCC_AHB4ENR_GPIOGEN_Msk +#define RCC_AHB4ENR_GPIOHEN_Pos (7U) +#define RCC_AHB4ENR_GPIOHEN_Msk (0x1UL << RCC_AHB4ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4ENR_GPIOHEN RCC_AHB4ENR_GPIOHEN_Msk +#define RCC_AHB4ENR_GPIOMEN_Pos (12U) +#define RCC_AHB4ENR_GPIOMEN_Msk (0x1UL << RCC_AHB4ENR_GPIOMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4ENR_GPIOMEN RCC_AHB4ENR_GPIOMEN_Msk +#define RCC_AHB4ENR_GPIONEN_Pos (13U) +#define RCC_AHB4ENR_GPIONEN_Msk (0x1UL << RCC_AHB4ENR_GPIONEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4ENR_GPIONEN RCC_AHB4ENR_GPIONEN_Msk +#define RCC_AHB4ENR_GPIOOEN_Pos (14U) +#define RCC_AHB4ENR_GPIOOEN_Msk (0x1UL << RCC_AHB4ENR_GPIOOEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4ENR_GPIOOEN RCC_AHB4ENR_GPIOOEN_Msk +#define RCC_AHB4ENR_GPIOPEN_Pos (15U) +#define RCC_AHB4ENR_GPIOPEN_Msk (0x1UL << RCC_AHB4ENR_GPIOPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4ENR_GPIOPEN RCC_AHB4ENR_GPIOPEN_Msk +#define RCC_AHB4ENR_CRCEN_Pos (19U) +#define RCC_AHB4ENR_CRCEN_Msk (0x1UL << RCC_AHB4ENR_CRCEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4ENR_CRCEN RCC_AHB4ENR_CRCEN_Msk +#define RCC_AHB4ENR_BKPRAMEN_Pos (28U) +#define RCC_AHB4ENR_BKPRAMEN_Msk (0x1UL << RCC_AHB4ENR_BKPRAMEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4ENR_BKPRAMEN RCC_AHB4ENR_BKPRAMEN_Msk + +/******************** Bit definition for RCC_AHB5ENR register ***************/ +#define RCC_AHB5ENR_HPDMA1EN_Pos (0U) +#define RCC_AHB5ENR_HPDMA1EN_Msk (0x1UL << RCC_AHB5ENR_HPDMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5ENR_HPDMA1EN RCC_AHB5ENR_HPDMA1EN_Msk +#define RCC_AHB5ENR_DMA2DEN_Pos (1U) +#define RCC_AHB5ENR_DMA2DEN_Msk (0x1UL << RCC_AHB5ENR_DMA2DEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5ENR_DMA2DEN RCC_AHB5ENR_DMA2DEN_Msk +#define RCC_AHB5ENR_JPEGEN_Pos (3U) +#define RCC_AHB5ENR_JPEGEN_Msk (0x1UL << RCC_AHB5ENR_JPEGEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5ENR_JPEGEN RCC_AHB5ENR_JPEGEN_Msk +#define RCC_AHB5ENR_FMCEN_Pos (4U) +#define RCC_AHB5ENR_FMCEN_Msk (0x1UL << RCC_AHB5ENR_FMCEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5ENR_FMCEN RCC_AHB5ENR_FMCEN_Msk +#define RCC_AHB5ENR_XSPI1EN_Pos (5U) +#define RCC_AHB5ENR_XSPI1EN_Msk (0x1UL << RCC_AHB5ENR_XSPI1EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5ENR_XSPI1EN RCC_AHB5ENR_XSPI1EN_Msk +#define RCC_AHB5ENR_SDMMC1EN_Pos (8U) +#define RCC_AHB5ENR_SDMMC1EN_Msk (0x1UL << RCC_AHB5ENR_SDMMC1EN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5ENR_SDMMC1EN RCC_AHB5ENR_SDMMC1EN_Msk +#define RCC_AHB5ENR_XSPI2EN_Pos (12U) +#define RCC_AHB5ENR_XSPI2EN_Msk (0x1UL << RCC_AHB5ENR_XSPI2EN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5ENR_XSPI2EN RCC_AHB5ENR_XSPI2EN_Msk +#define RCC_AHB5ENR_XSPIMEN_Pos (14U) +#define RCC_AHB5ENR_XSPIMEN_Msk (0x1UL << RCC_AHB5ENR_XSPIMEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5ENR_XSPIMEN RCC_AHB5ENR_XSPIMEN_Msk +#define RCC_AHB5ENR_GFXMMUEN_Pos (19U) +#define RCC_AHB5ENR_GFXMMUEN_Msk (0x1UL << RCC_AHB5ENR_GFXMMUEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5ENR_GFXMMUEN RCC_AHB5ENR_GFXMMUEN_Msk +#define RCC_AHB5ENR_GPU2DEN_Pos (20U) +#define RCC_AHB5ENR_GPU2DEN_Msk (0x1UL << RCC_AHB5ENR_GPU2DEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB5ENR_GPU2DEN RCC_AHB5ENR_GPU2DEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_TIM3EN_Pos (1U) +#define RCC_APB1ENR1_TIM3EN_Msk (0x1UL << RCC_APB1ENR1_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR1_TIM3EN RCC_APB1ENR1_TIM3EN_Msk +#define RCC_APB1ENR1_TIM4EN_Pos (2U) +#define RCC_APB1ENR1_TIM4EN_Msk (0x1UL << RCC_APB1ENR1_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR1_TIM4EN RCC_APB1ENR1_TIM4EN_Msk +#define RCC_APB1ENR1_TIM5EN_Pos (3U) +#define RCC_APB1ENR1_TIM5EN_Msk (0x1UL << RCC_APB1ENR1_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR1_TIM5EN RCC_APB1ENR1_TIM5EN_Msk +#define RCC_APB1ENR1_TIM6EN_Pos (4U) +#define RCC_APB1ENR1_TIM6EN_Msk (0x1UL << RCC_APB1ENR1_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR1_TIM6EN RCC_APB1ENR1_TIM6EN_Msk +#define RCC_APB1ENR1_TIM7EN_Pos (5U) +#define RCC_APB1ENR1_TIM7EN_Msk (0x1UL << RCC_APB1ENR1_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR1_TIM7EN RCC_APB1ENR1_TIM7EN_Msk +#define RCC_APB1ENR1_TIM12EN_Pos (6U) +#define RCC_APB1ENR1_TIM12EN_Msk (0x1UL << RCC_APB1ENR1_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR1_TIM12EN RCC_APB1ENR1_TIM12EN_Msk +#define RCC_APB1ENR1_TIM13EN_Pos (7U) +#define RCC_APB1ENR1_TIM13EN_Msk (0x1UL << RCC_APB1ENR1_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR1_TIM13EN RCC_APB1ENR1_TIM13EN_Msk +#define RCC_APB1ENR1_TIM14EN_Pos (8U) +#define RCC_APB1ENR1_TIM14EN_Msk (0x1UL << RCC_APB1ENR1_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR1_TIM14EN RCC_APB1ENR1_TIM14EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (9U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_SPI2EN_Pos (14U) +#define RCC_APB1ENR1_SPI2EN_Msk (0x1UL << RCC_APB1ENR1_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR1_SPI2EN RCC_APB1ENR1_SPI2EN_Msk +#define RCC_APB1ENR1_SPI3EN_Pos (15U) +#define RCC_APB1ENR1_SPI3EN_Msk (0x1UL << RCC_APB1ENR1_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR1_SPI3EN RCC_APB1ENR1_SPI3EN_Msk +#define RCC_APB1ENR1_SPDIFRXEN_Pos (16U) +#define RCC_APB1ENR1_SPDIFRXEN_Msk (0x1UL << RCC_APB1ENR1_SPDIFRXEN_Pos) /*!< 0x00010000 */ +#define RCC_APB1ENR1_SPDIFRXEN RCC_APB1ENR1_SPDIFRXEN_Msk +#define RCC_APB1ENR1_USART2EN_Pos (17U) +#define RCC_APB1ENR1_USART2EN_Msk (0x1UL << RCC_APB1ENR1_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR1_USART2EN RCC_APB1ENR1_USART2EN_Msk +#define RCC_APB1ENR1_USART3EN_Pos (18U) +#define RCC_APB1ENR1_USART3EN_Msk (0x1UL << RCC_APB1ENR1_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR1_USART3EN RCC_APB1ENR1_USART3EN_Msk +#define RCC_APB1ENR1_UART4EN_Pos (19U) +#define RCC_APB1ENR1_UART4EN_Msk (0x1UL << RCC_APB1ENR1_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR1_UART4EN RCC_APB1ENR1_UART4EN_Msk +#define RCC_APB1ENR1_UART5EN_Pos (20U) +#define RCC_APB1ENR1_UART5EN_Msk (0x1UL << RCC_APB1ENR1_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR1_UART5EN RCC_APB1ENR1_UART5EN_Msk +#define RCC_APB1ENR1_I2C1_I3C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1_I3C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1_I3C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1_I3C1EN RCC_APB1ENR1_I2C1_I3C1EN_Msk +#define RCC_APB1ENR1_I2C2EN_Pos (22U) +#define RCC_APB1ENR1_I2C2EN_Msk (0x1UL << RCC_APB1ENR1_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR1_I2C2EN RCC_APB1ENR1_I2C2EN_Msk +#define RCC_APB1ENR1_I2C3EN_Pos (23U) +#define RCC_APB1ENR1_I2C3EN_Msk (0x1UL << RCC_APB1ENR1_I2C3EN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR1_I2C3EN RCC_APB1ENR1_I2C3EN_Msk +#define RCC_APB1ENR1_CECEN_Pos (27U) +#define RCC_APB1ENR1_CECEN_Msk (0x1UL << RCC_APB1ENR1_CECEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR1_CECEN RCC_APB1ENR1_CECEN_Msk +#define RCC_APB1ENR1_UART7EN_Pos (30U) +#define RCC_APB1ENR1_UART7EN_Msk (0x1UL << RCC_APB1ENR1_UART7EN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR1_UART7EN RCC_APB1ENR1_UART7EN_Msk +#define RCC_APB1ENR1_UART8EN_Pos (31U) +#define RCC_APB1ENR1_UART8EN_Msk (0x1UL << RCC_APB1ENR1_UART8EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_UART8EN RCC_APB1ENR1_UART8EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_CRSEN_Pos (1U) +#define RCC_APB1ENR2_CRSEN_Msk (0x1UL << RCC_APB1ENR2_CRSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR2_CRSEN RCC_APB1ENR2_CRSEN_Msk +#define RCC_APB1ENR2_MDIOSEN_Pos (5U) +#define RCC_APB1ENR2_MDIOSEN_Msk (0x1UL << RCC_APB1ENR2_MDIOSEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_MDIOSEN RCC_APB1ENR2_MDIOSEN_Msk +#define RCC_APB1ENR2_FDCANEN_Pos (8U) +#define RCC_APB1ENR2_FDCANEN_Msk (0x1UL << RCC_APB1ENR2_FDCANEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR2_FDCANEN RCC_APB1ENR2_FDCANEN_Msk +#define RCC_APB1ENR2_UCPD1EN_Pos (27U) +#define RCC_APB1ENR2_UCPD1EN_Msk (0x1UL << RCC_APB1ENR2_UCPD1EN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR2_UCPD1EN RCC_APB1ENR2_UCPD1EN_Msk + +/******************** Bit definition for RCC_APB2ENR register ***************/ +#define RCC_APB2ENR_TIM1EN_Pos (0U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (4U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_SPI4EN_Pos (13U) +#define RCC_APB2ENR_SPI4EN_Msk (0x1UL << RCC_APB2ENR_SPI4EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_SPI4EN RCC_APB2ENR_SPI4EN_Msk +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk +#define RCC_APB2ENR_SPI5EN_Pos (20U) +#define RCC_APB2ENR_SPI5EN_Msk (0x1UL << RCC_APB2ENR_SPI5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_SPI5EN RCC_APB2ENR_SPI5EN_Msk +#define RCC_APB2ENR_SAI1EN_Pos (22U) +#define RCC_APB2ENR_SAI1EN_Msk (0x1UL << RCC_APB2ENR_SAI1EN_Pos) /*!< 0x00400000 */ +#define RCC_APB2ENR_SAI1EN RCC_APB2ENR_SAI1EN_Msk +#define RCC_APB2ENR_SAI2EN_Pos (23U) +#define RCC_APB2ENR_SAI2EN_Msk (0x1UL << RCC_APB2ENR_SAI2EN_Pos) /*!< 0x00800000 */ +#define RCC_APB2ENR_SAI2EN RCC_APB2ENR_SAI2EN_Msk + +/******************** Bit definition for RCC_APB4ENR register ***************/ +#define RCC_APB4ENR_SBSEN_Pos (1U) +#define RCC_APB4ENR_SBSEN_Msk (0x1UL << RCC_APB4ENR_SBSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4ENR_SBSEN RCC_APB4ENR_SBSEN_Msk +#define RCC_APB4ENR_LPUART1EN_Pos (3U) +#define RCC_APB4ENR_LPUART1EN_Msk (0x1UL << RCC_APB4ENR_LPUART1EN_Pos) /*!< 0x00000008 */ +#define RCC_APB4ENR_LPUART1EN RCC_APB4ENR_LPUART1EN_Msk +#define RCC_APB4ENR_SPI6EN_Pos (5U) +#define RCC_APB4ENR_SPI6EN_Msk (0x1UL << RCC_APB4ENR_SPI6EN_Pos) /*!< 0x00000020 */ +#define RCC_APB4ENR_SPI6EN RCC_APB4ENR_SPI6EN_Msk +#define RCC_APB4ENR_LPTIM2EN_Pos (9U) +#define RCC_APB4ENR_LPTIM2EN_Msk (0x1UL << RCC_APB4ENR_LPTIM2EN_Pos) /*!< 0x00000200 */ +#define RCC_APB4ENR_LPTIM2EN RCC_APB4ENR_LPTIM2EN_Msk +#define RCC_APB4ENR_LPTIM3EN_Pos (10U) +#define RCC_APB4ENR_LPTIM3EN_Msk (0x1UL << RCC_APB4ENR_LPTIM3EN_Pos) /*!< 0x00000400 */ +#define RCC_APB4ENR_LPTIM3EN RCC_APB4ENR_LPTIM3EN_Msk +#define RCC_APB4ENR_LPTIM4EN_Pos (11U) +#define RCC_APB4ENR_LPTIM4EN_Msk (0x1UL << RCC_APB4ENR_LPTIM4EN_Pos) /*!< 0x00000800 */ +#define RCC_APB4ENR_LPTIM4EN RCC_APB4ENR_LPTIM4EN_Msk +#define RCC_APB4ENR_LPTIM5EN_Pos (12U) +#define RCC_APB4ENR_LPTIM5EN_Msk (0x1UL << RCC_APB4ENR_LPTIM5EN_Pos) /*!< 0x00001000 */ +#define RCC_APB4ENR_LPTIM5EN RCC_APB4ENR_LPTIM5EN_Msk +#define RCC_APB4ENR_VREFEN_Pos (15U) +#define RCC_APB4ENR_VREFEN_Msk (0x1UL << RCC_APB4ENR_VREFEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4ENR_VREFEN RCC_APB4ENR_VREFEN_Msk +#define RCC_APB4ENR_RTCAPBEN_Pos (16U) +#define RCC_APB4ENR_RTCAPBEN_Msk (0x1UL << RCC_APB4ENR_RTCAPBEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4ENR_RTCAPBEN RCC_APB4ENR_RTCAPBEN_Msk +#define RCC_APB4ENR_DTSEN_Pos (26U) +#define RCC_APB4ENR_DTSEN_Msk (0x1UL << RCC_APB4ENR_DTSEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4ENR_DTSEN RCC_APB4ENR_DTSEN_Msk + +/******************** Bit definition for RCC_APB5ENR register ***************/ +#define RCC_APB5ENR_LTDCEN_Pos (1U) +#define RCC_APB5ENR_LTDCEN_Msk (0x1UL << RCC_APB5ENR_LTDCEN_Pos) /*!< 0x00000002 */ +#define RCC_APB5ENR_LTDCEN RCC_APB5ENR_LTDCEN_Msk +#define RCC_APB5ENR_DCMIPPEN_Pos (2U) +#define RCC_APB5ENR_DCMIPPEN_Msk (0x1UL << RCC_APB5ENR_DCMIPPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5ENR_DCMIPPEN RCC_APB5ENR_DCMIPPEN_Msk +#define RCC_APB5ENR_GFXTIMEN_Pos (4U) +#define RCC_APB5ENR_GFXTIMEN_Msk (0x1UL << RCC_APB5ENR_GFXTIMEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5ENR_GFXTIMEN RCC_APB5ENR_GFXTIMEN_Msk + +/******************** Bit definition for RCC_AHB1LPENR register *************/ +#define RCC_AHB1LPENR_GPDMA1LPEN_Pos (4U) +#define RCC_AHB1LPENR_GPDMA1LPEN_Msk (0x1UL << RCC_AHB1LPENR_GPDMA1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1LPENR_GPDMA1LPEN RCC_AHB1LPENR_GPDMA1LPEN_Msk +#define RCC_AHB1LPENR_ADC12LPEN_Pos (5U) +#define RCC_AHB1LPENR_ADC12LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADC12LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1LPENR_ADC12LPEN RCC_AHB1LPENR_ADC12LPEN_Msk +#define RCC_AHB1LPENR_ETH1MACLPEN_Pos (15U) +#define RCC_AHB1LPENR_ETH1MACLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1MACLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1LPENR_ETH1MACLPEN RCC_AHB1LPENR_ETH1MACLPEN_Msk +#define RCC_AHB1LPENR_ETH1TXLPEN_Pos (16U) +#define RCC_AHB1LPENR_ETH1TXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1TXLPEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1LPENR_ETH1TXLPEN RCC_AHB1LPENR_ETH1TXLPEN_Msk +#define RCC_AHB1LPENR_ETH1RXLPEN_Pos (17U) +#define RCC_AHB1LPENR_ETH1RXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1RXLPEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1LPENR_ETH1RXLPEN RCC_AHB1LPENR_ETH1RXLPEN_Msk +#define RCC_AHB1LPENR_UCPDCTRL_Pos (24U) +#define RCC_AHB1LPENR_UCPDCTRL_Msk (0x1UL << RCC_AHB1LPENR_UCPDCTRL_Pos) /*!< 0x01000000 */ +#define RCC_AHB1LPENR_UCPDCTRL RCC_AHB1LPENR_UCPDCTRL_Msk +#define RCC_AHB1LPENR_OTGHSLPEN_Pos (25U) +#define RCC_AHB1LPENR_OTGHSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGHSLPEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1LPENR_OTGHSLPEN RCC_AHB1LPENR_OTGHSLPEN_Msk +#define RCC_AHB1LPENR_USBPHYCLPEN_Pos (26U) +#define RCC_AHB1LPENR_USBPHYCLPEN_Msk (0x1UL << RCC_AHB1LPENR_USBPHYCLPEN_Pos)/*!< 0x04000000 */ +#define RCC_AHB1LPENR_USBPHYCLPEN RCC_AHB1LPENR_USBPHYCLPEN_Msk +#define RCC_AHB1LPENR_OTGFSLPEN_Pos (27U) +#define RCC_AHB1LPENR_OTGFSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGFSLPEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1LPENR_OTGFSLPEN RCC_AHB1LPENR_OTGFSLPEN_Msk +#define RCC_AHB1LPENR_ADF1LPEN_Pos (31U) +#define RCC_AHB1LPENR_ADF1LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADF1LPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1LPENR_ADF1LPEN RCC_AHB1LPENR_ADF1LPEN_Msk + +/******************** Bit definition for RCC_AHB2LPENR register *************/ +#define RCC_AHB2LPENR_PSSILPEN_Pos (1U) +#define RCC_AHB2LPENR_PSSILPEN_Msk (0x1UL << RCC_AHB2LPENR_PSSILPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2LPENR_PSSILPEN RCC_AHB2LPENR_PSSILPEN_Msk +#define RCC_AHB2LPENR_SDMMC2LPEN_Pos (9U) +#define RCC_AHB2LPENR_SDMMC2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SDMMC2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2LPENR_SDMMC2LPEN RCC_AHB2LPENR_SDMMC2LPEN_Msk +#define RCC_AHB2LPENR_CORDICLPEN_Pos (14U) +#define RCC_AHB2LPENR_CORDICLPEN_Msk (0x1UL << RCC_AHB2LPENR_CORDICLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2LPENR_CORDICLPEN RCC_AHB2LPENR_CORDICLPEN_Msk +#define RCC_AHB2LPENR_SRAM1LPEN_Pos (29U) +#define RCC_AHB2LPENR_SRAM1LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM1LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2LPENR_SRAM1LPEN RCC_AHB2LPENR_SRAM1LPEN_Msk +#define RCC_AHB2LPENR_SRAM2LPEN_Pos (30U) +#define RCC_AHB2LPENR_SRAM2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM2LPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2LPENR_SRAM2LPEN RCC_AHB2LPENR_SRAM2LPEN_Msk + +/******************** Bit definition for RCC_AHB3LPENR register *************/ +#define RCC_AHB3LPENR_RNGLPEN_Pos (0U) +#define RCC_AHB3LPENR_RNGLPEN_Msk (0x1UL << RCC_AHB3LPENR_RNGLPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3LPENR_RNGLPEN RCC_AHB3LPENR_RNGLPEN_Msk +#define RCC_AHB3LPENR_HASHLPEN_Pos (1U) +#define RCC_AHB3LPENR_HASHLPEN_Msk (0x1UL << RCC_AHB3LPENR_HASHLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3LPENR_HASHLPEN RCC_AHB3LPENR_HASHLPEN_Msk +#define RCC_AHB3LPENR_PKALPEN_Pos (6U) +#define RCC_AHB3LPENR_PKALPEN_Msk (0x1UL << RCC_AHB3LPENR_PKALPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3LPENR_PKALPEN RCC_AHB3LPENR_PKALPEN_Msk + +/******************** Bit definition for RCC_AHB4LPENR register *************/ +#define RCC_AHB4LPENR_GPIOALPEN_Pos (0U) +#define RCC_AHB4LPENR_GPIOALPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOALPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4LPENR_GPIOALPEN RCC_AHB4LPENR_GPIOALPEN_Msk +#define RCC_AHB4LPENR_GPIOBLPEN_Pos (1U) +#define RCC_AHB4LPENR_GPIOBLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOBLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4LPENR_GPIOBLPEN RCC_AHB4LPENR_GPIOBLPEN_Msk +#define RCC_AHB4LPENR_GPIOCLPEN_Pos (2U) +#define RCC_AHB4LPENR_GPIOCLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOCLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4LPENR_GPIOCLPEN RCC_AHB4LPENR_GPIOCLPEN_Msk +#define RCC_AHB4LPENR_GPIODLPEN_Pos (3U) +#define RCC_AHB4LPENR_GPIODLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIODLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4LPENR_GPIODLPEN RCC_AHB4LPENR_GPIODLPEN_Msk +#define RCC_AHB4LPENR_GPIOELPEN_Pos (4U) +#define RCC_AHB4LPENR_GPIOELPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOELPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4LPENR_GPIOELPEN RCC_AHB4LPENR_GPIOELPEN_Msk +#define RCC_AHB4LPENR_GPIOFLPEN_Pos (5U) +#define RCC_AHB4LPENR_GPIOFLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOFLPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4LPENR_GPIOFLPEN RCC_AHB4LPENR_GPIOFLPEN_Msk +#define RCC_AHB4LPENR_GPIOGLPEN_Pos (6U) +#define RCC_AHB4LPENR_GPIOGLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOGLPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4LPENR_GPIOGLPEN RCC_AHB4LPENR_GPIOGLPEN_Msk +#define RCC_AHB4LPENR_GPIOHLPEN_Pos (7U) +#define RCC_AHB4LPENR_GPIOHLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOHLPEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4LPENR_GPIOHLPEN RCC_AHB4LPENR_GPIOHLPEN_Msk +#define RCC_AHB4LPENR_GPIOMLPEN_Pos (12U) +#define RCC_AHB4LPENR_GPIOMLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOMLPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4LPENR_GPIOMLPEN RCC_AHB4LPENR_GPIOMLPEN_Msk +#define RCC_AHB4LPENR_GPIONLPEN_Pos (13U) +#define RCC_AHB4LPENR_GPIONLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIONLPEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4LPENR_GPIONLPEN RCC_AHB4LPENR_GPIONLPEN_Msk +#define RCC_AHB4LPENR_GPIOOLPEN_Pos (14U) +#define RCC_AHB4LPENR_GPIOOLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOOLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4LPENR_GPIOOLPEN RCC_AHB4LPENR_GPIOOLPEN_Msk +#define RCC_AHB4LPENR_GPIOPLPEN_Pos (15U) +#define RCC_AHB4LPENR_GPIOPLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOPLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4LPENR_GPIOPLPEN RCC_AHB4LPENR_GPIOPLPEN_Msk +#define RCC_AHB4LPENR_CRCLPEN_Pos (19U) +#define RCC_AHB4LPENR_CRCLPEN_Msk (0x1UL << RCC_AHB4LPENR_CRCLPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4LPENR_CRCLPEN RCC_AHB4LPENR_CRCLPEN_Msk +#define RCC_AHB4LPENR_BKPRAMLPEN_Pos (28U) +#define RCC_AHB4LPENR_BKPRAMLPEN_Msk (0x1UL << RCC_AHB4LPENR_BKPRAMLPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4LPENR_BKPRAMLPEN RCC_AHB4LPENR_BKPRAMLPEN_Msk + +/******************** Bit definition for RCC_AHB5LPENR register *************/ +#define RCC_AHB5LPENR_HPDMA1LPEN_Pos (0U) +#define RCC_AHB5LPENR_HPDMA1LPEN_Msk (0x1UL << RCC_AHB5LPENR_HPDMA1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5LPENR_HPDMA1LPEN RCC_AHB5LPENR_HPDMA1LPEN_Msk +#define RCC_AHB5LPENR_DMA2DLPEN_Pos (1U) +#define RCC_AHB5LPENR_DMA2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_DMA2DLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5LPENR_DMA2DLPEN RCC_AHB5LPENR_DMA2DLPEN_Msk +#define RCC_AHB5LPENR_FLASHLPEN_Pos (2U) +#define RCC_AHB5LPENR_FLASHLPEN_Msk (0x1UL << RCC_AHB5LPENR_FLASHLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB5LPENR_FLASHLPEN RCC_AHB5LPENR_FLASHLPEN_Msk +#define RCC_AHB5LPENR_JPEGLPEN_Pos (3U) +#define RCC_AHB5LPENR_JPEGLPEN_Msk (0x1UL << RCC_AHB5LPENR_JPEGLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5LPENR_JPEGLPEN RCC_AHB5LPENR_JPEGLPEN_Msk +#define RCC_AHB5LPENR_FMCLPEN_Pos (4U) +#define RCC_AHB5LPENR_FMCLPEN_Msk (0x1UL << RCC_AHB5LPENR_FMCLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5LPENR_FMCLPEN RCC_AHB5LPENR_FMCLPEN_Msk +#define RCC_AHB5LPENR_XSPI1LPEN_Pos (5U) +#define RCC_AHB5LPENR_XSPI1LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI1LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5LPENR_XSPI1LPEN RCC_AHB5LPENR_XSPI1LPEN_Msk +#define RCC_AHB5LPENR_SDMMC1LPEN_Pos (8U) +#define RCC_AHB5LPENR_SDMMC1LPEN_Msk (0x1UL << RCC_AHB5LPENR_SDMMC1LPEN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5LPENR_SDMMC1LPEN RCC_AHB5LPENR_SDMMC1LPEN_Msk +#define RCC_AHB5LPENR_XSPI2LPEN_Pos (12U) +#define RCC_AHB5LPENR_XSPI2LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI2LPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5LPENR_XSPI2LPEN RCC_AHB5LPENR_XSPI2LPEN_Msk +#define RCC_AHB5LPENR_XSPIMLPEN_Pos (14U) +#define RCC_AHB5LPENR_XSPIMLPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPIMLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5LPENR_XSPIMLPEN RCC_AHB5LPENR_XSPIMLPEN_Msk +#define RCC_AHB5LPENR_GFXMMULPEN_Pos (19U) +#define RCC_AHB5LPENR_GFXMMULPEN_Msk (0x1UL << RCC_AHB5LPENR_GFXMMULPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5LPENR_GFXMMULPEN RCC_AHB5LPENR_GFXMMULPEN_Msk +#define RCC_AHB5LPENR_GPU2DLPEN_Pos (20U) +#define RCC_AHB5LPENR_GPU2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_GPU2DLPEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB5LPENR_GPU2DLPEN RCC_AHB5LPENR_GPU2DLPEN_Msk +#define RCC_AHB5LPENR_DTCM1LPEN_Pos (28U) +#define RCC_AHB5LPENR_DTCM1LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM1LPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB5LPENR_DTCM1LPEN RCC_AHB5LPENR_DTCM1LPEN_Msk +#define RCC_AHB5LPENR_DTCM2LPEN_Pos (29U) +#define RCC_AHB5LPENR_DTCM2LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM2LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB5LPENR_DTCM2LPEN RCC_AHB5LPENR_DTCM2LPEN_Msk +#define RCC_AHB5LPENR_ITCMLPEN_Pos (30U) +#define RCC_AHB5LPENR_ITCMLPEN_Msk (0x1UL << RCC_AHB5LPENR_ITCMLPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB5LPENR_ITCMLPEN RCC_AHB5LPENR_ITCMLPEN_Msk +#define RCC_AHB5LPENR_AXISRAMLPEN_Pos (31U) +#define RCC_AHB5LPENR_AXISRAMLPEN_Msk (0x1UL << RCC_AHB5LPENR_AXISRAMLPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB5LPENR_AXISRAMLPEN RCC_AHB5LPENR_AXISRAMLPEN_Msk + +/******************** Bit definition for RCC_APB1LPENR1 register ************/ +#define RCC_APB1LPENR1_TIM2LPEN_Pos (0U) +#define RCC_APB1LPENR1_TIM2LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM2LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1LPENR1_TIM2LPEN RCC_APB1LPENR1_TIM2LPEN_Msk +#define RCC_APB1LPENR1_TIM3LPEN_Pos (1U) +#define RCC_APB1LPENR1_TIM3LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM3LPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR1_TIM3LPEN RCC_APB1LPENR1_TIM3LPEN_Msk +#define RCC_APB1LPENR1_TIM4LPEN_Pos (2U) +#define RCC_APB1LPENR1_TIM4LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM4LPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB1LPENR1_TIM4LPEN RCC_APB1LPENR1_TIM4LPEN_Msk +#define RCC_APB1LPENR1_TIM5LPEN_Pos (3U) +#define RCC_APB1LPENR1_TIM5LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM5LPEN_Pos) /*!< 0x00000008 */ +#define RCC_APB1LPENR1_TIM5LPEN RCC_APB1LPENR1_TIM5LPEN_Msk +#define RCC_APB1LPENR1_TIM6LPEN_Pos (4U) +#define RCC_APB1LPENR1_TIM6LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM6LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB1LPENR1_TIM6LPEN RCC_APB1LPENR1_TIM6LPEN_Msk +#define RCC_APB1LPENR1_TIM7LPEN_Pos (5U) +#define RCC_APB1LPENR1_TIM7LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM7LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR1_TIM7LPEN RCC_APB1LPENR1_TIM7LPEN_Msk +#define RCC_APB1LPENR1_TIM12LPEN_Pos (6U) +#define RCC_APB1LPENR1_TIM12LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM12LPEN_Pos) /*!< 0x00000040 */ +#define RCC_APB1LPENR1_TIM12LPEN RCC_APB1LPENR1_TIM12LPEN_Msk +#define RCC_APB1LPENR1_TIM13LPEN_Pos (7U) +#define RCC_APB1LPENR1_TIM13LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM13LPEN_Pos) /*!< 0x00000080 */ +#define RCC_APB1LPENR1_TIM13LPEN RCC_APB1LPENR1_TIM13LPEN_Msk +#define RCC_APB1LPENR1_TIM14LPEN_Pos (8U) +#define RCC_APB1LPENR1_TIM14LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM14LPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR1_TIM14LPEN RCC_APB1LPENR1_TIM14LPEN_Msk +#define RCC_APB1LPENR1_LPTIM1LPEN_Pos (9U) +#define RCC_APB1LPENR1_LPTIM1LPEN_Msk (0x1UL << RCC_APB1LPENR1_LPTIM1LPEN_Pos)/*!< 0x00000200 */ +#define RCC_APB1LPENR1_LPTIM1LPEN RCC_APB1LPENR1_LPTIM1LPEN_Msk +#define RCC_APB1LPENR1_WWDGLPEN_Pos (11U) +#define RCC_APB1LPENR1_WWDGLPEN_Msk (0x1UL << RCC_APB1LPENR1_WWDGLPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1LPENR1_WWDGLPEN RCC_APB1LPENR1_WWDGLPEN_Msk +#define RCC_APB1LPENR1_SPI2LPEN_Pos (14U) +#define RCC_APB1LPENR1_SPI2LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI2LPEN_Pos) /*!< 0x00004000 */ +#define RCC_APB1LPENR1_SPI2LPEN RCC_APB1LPENR1_SPI2LPEN_Msk +#define RCC_APB1LPENR1_SPI3LPEN_Pos (15U) +#define RCC_APB1LPENR1_SPI3LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI3LPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB1LPENR1_SPI3LPEN RCC_APB1LPENR1_SPI3LPEN_Msk +#define RCC_APB1LPENR1_SPDIFRXLPEN_Pos (16U) +#define RCC_APB1LPENR1_SPDIFRXLPEN_Msk (0x1UL << RCC_APB1LPENR1_SPDIFRXLPEN_Pos)/*!< 0x00010000 */ +#define RCC_APB1LPENR1_SPDIFRXLPEN RCC_APB1LPENR1_SPDIFRXLPEN_Msk +#define RCC_APB1LPENR1_USART2LPEN_Pos (17U) +#define RCC_APB1LPENR1_USART2LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART2LPEN_Pos)/*!< 0x00020000 */ +#define RCC_APB1LPENR1_USART2LPEN RCC_APB1LPENR1_USART2LPEN_Msk +#define RCC_APB1LPENR1_USART3LPEN_Pos (18U) +#define RCC_APB1LPENR1_USART3LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART3LPEN_Pos)/*!< 0x00040000 */ +#define RCC_APB1LPENR1_USART3LPEN RCC_APB1LPENR1_USART3LPEN_Msk +#define RCC_APB1LPENR1_UART4LPEN_Pos (19U) +#define RCC_APB1LPENR1_UART4LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART4LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB1LPENR1_UART4LPEN RCC_APB1LPENR1_UART4LPEN_Msk +#define RCC_APB1LPENR1_UART5LPEN_Pos (20U) +#define RCC_APB1LPENR1_UART5LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB1LPENR1_UART5LPEN RCC_APB1LPENR1_UART5LPEN_Msk +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos (21U) +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1LPENR1_I2C1_I3C1LPEN RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk +#define RCC_APB1LPENR1_I2C2LPEN_Pos (22U) +#define RCC_APB1LPENR1_I2C2LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C2LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB1LPENR1_I2C2LPEN RCC_APB1LPENR1_I2C2LPEN_Msk +#define RCC_APB1LPENR1_I2C3LPEN_Pos (23U) +#define RCC_APB1LPENR1_I2C3LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C3LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1LPENR1_I2C3LPEN RCC_APB1LPENR1_I2C3LPEN_Msk +#define RCC_APB1LPENR1_CECLPEN_Pos (27U) +#define RCC_APB1LPENR1_CECLPEN_Msk (0x1UL << RCC_APB1LPENR1_CECLPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR1_CECLPEN RCC_APB1LPENR1_CECLPEN_Msk +#define RCC_APB1LPENR1_UART7LPEN_Pos (30U) +#define RCC_APB1LPENR1_UART7LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART7LPEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1LPENR1_UART7LPEN RCC_APB1LPENR1_UART7LPEN_Msk +#define RCC_APB1LPENR1_UART8LPEN_Pos (31U) +#define RCC_APB1LPENR1_UART8LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART8LPEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1LPENR1_UART8LPEN RCC_APB1LPENR1_UART8LPEN_Msk + +/******************** Bit definition for RCC_PB1LPENR2 register ************/ +#define RCC_APB1LPENR2_CRSLPEN_Pos (1U) +#define RCC_APB1LPENR2_CRSLPEN_Msk (0x1UL << RCC_APB1LPENR2_CRSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR2_CRSLPEN RCC_APB1LPENR2_CRSLPEN_Msk +#define RCC_APB1LPENR2_MDIOSLPEN_Pos (5U) +#define RCC_APB1LPENR2_MDIOSLPEN_Msk (0x1UL << RCC_APB1LPENR2_MDIOSLPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR2_MDIOSLPEN RCC_APB1LPENR2_MDIOSLPEN_Msk +#define RCC_APB1LPENR2_FDCANLPEN_Pos (8U) +#define RCC_APB1LPENR2_FDCANLPEN_Msk (0x1UL << RCC_APB1LPENR2_FDCANLPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR2_FDCANLPEN RCC_APB1LPENR2_FDCANLPEN_Msk +#define RCC_APB1LPENR2_UCPD1LPEN_Pos (27U) +#define RCC_APB1LPENR2_UCPD1LPEN_Msk (0x1UL << RCC_APB1LPENR2_UCPD1LPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR2_UCPD1LPEN RCC_APB1LPENR2_UCPD1LPEN_Msk + +/******************** Bit definition for RCC_APB2LPENR register *************/ +#define RCC_APB2LPENR_TIM1LPEN_Pos (0U) +#define RCC_APB2LPENR_TIM1LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2LPENR_TIM1LPEN RCC_APB2LPENR_TIM1LPEN_Msk +#define RCC_APB2LPENR_USART1LPEN_Pos (4U) +#define RCC_APB2LPENR_USART1LPEN_Msk (0x1UL << RCC_APB2LPENR_USART1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2LPENR_USART1LPEN RCC_APB2LPENR_USART1LPEN_Msk +#define RCC_APB2LPENR_SPI1LPEN_Pos (12U) +#define RCC_APB2LPENR_SPI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI1LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2LPENR_SPI1LPEN RCC_APB2LPENR_SPI1LPEN_Msk +#define RCC_APB2LPENR_SPI4LPEN_Pos (13U) +#define RCC_APB2LPENR_SPI4LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI4LPEN_Pos) /*!< 0x00002000 */ +#define RCC_APB2LPENR_SPI4LPEN RCC_APB2LPENR_SPI4LPEN_Msk +#define RCC_APB2LPENR_TIM15LPEN_Pos (16U) +#define RCC_APB2LPENR_TIM15LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM15LPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB2LPENR_TIM15LPEN RCC_APB2LPENR_TIM15LPEN_Msk +#define RCC_APB2LPENR_TIM16LPEN_Pos (17U) +#define RCC_APB2LPENR_TIM16LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM16LPEN_Pos) /*!< 0x00020000 */ +#define RCC_APB2LPENR_TIM16LPEN RCC_APB2LPENR_TIM16LPEN_Msk +#define RCC_APB2LPENR_TIM17LPEN_Pos (18U) +#define RCC_APB2LPENR_TIM17LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM17LPEN_Pos) /*!< 0x00040000 */ +#define RCC_APB2LPENR_TIM17LPEN RCC_APB2LPENR_TIM17LPEN_Msk +#define RCC_APB2LPENR_TIM9LPEN_Pos (19U) +#define RCC_APB2LPENR_TIM9LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM9LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB2LPENR_TIM9LPEN RCC_APB2LPENR_TIM9LPEN_Msk +#define RCC_APB2LPENR_SPI5LPEN_Pos (20U) +#define RCC_APB2LPENR_SPI5LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB2LPENR_SPI5LPEN RCC_APB2LPENR_SPI5LPEN_Msk +#define RCC_APB2LPENR_SAI1LPEN_Pos (22U) +#define RCC_APB2LPENR_SAI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI1LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB2LPENR_SAI1LPEN RCC_APB2LPENR_SAI1LPEN_Msk +#define RCC_APB2LPENR_SAI2LPEN_Pos (23U) +#define RCC_APB2LPENR_SAI2LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI2LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB2LPENR_SAI2LPEN RCC_APB2LPENR_SAI2LPEN_Msk + +/******************** Bit definition for RCC_APB4LPENR register *************/ +#define RCC_APB4LPENR_SBSLPEN_Pos (1U) +#define RCC_APB4LPENR_SBSLPEN_Msk (0x1UL << RCC_APB4LPENR_SBSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4LPENR_SBSLPEN RCC_APB4LPENR_SBSLPEN_Msk +#define RCC_APB4LPENR_LPUART1LPEN_Pos (3U) +#define RCC_APB4LPENR_LPUART1LPEN_Msk (0x1UL << RCC_APB4LPENR_LPUART1LPEN_Pos)/*!< 0x00000008 */ +#define RCC_APB4LPENR_LPUART1LPEN RCC_APB4LPENR_LPUART1LPEN_Msk +#define RCC_APB4LPENR_SPI6LPEN_Pos (5U) +#define RCC_APB4LPENR_SPI6LPEN_Msk (0x1UL << RCC_APB4LPENR_SPI6LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB4LPENR_SPI6LPEN RCC_APB4LPENR_SPI6LPEN_Msk +#define RCC_APB4LPENR_LPTIM2LPEN_Pos (9U) +#define RCC_APB4LPENR_LPTIM2LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_APB4LPENR_LPTIM2LPEN RCC_APB4LPENR_LPTIM2LPEN_Msk +#define RCC_APB4LPENR_LPTIM3LPEN_Pos (10U) +#define RCC_APB4LPENR_LPTIM3LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM3LPEN_Pos) /*!< 0x00000400 */ +#define RCC_APB4LPENR_LPTIM3LPEN RCC_APB4LPENR_LPTIM3LPEN_Msk +#define RCC_APB4LPENR_LPTIM4LPEN_Pos (11U) +#define RCC_APB4LPENR_LPTIM4LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM4LPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB4LPENR_LPTIM4LPEN RCC_APB4LPENR_LPTIM4LPEN_Msk +#define RCC_APB4LPENR_LPTIM5LPEN_Pos (12U) +#define RCC_APB4LPENR_LPTIM5LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM5LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB4LPENR_LPTIM5LPEN RCC_APB4LPENR_LPTIM5LPEN_Msk +#define RCC_APB4LPENR_VREFLPEN_Pos (15U) +#define RCC_APB4LPENR_VREFLPEN_Msk (0x1UL << RCC_APB4LPENR_VREFLPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4LPENR_VREFLPEN RCC_APB4LPENR_VREFLPEN_Msk +#define RCC_APB4LPENR_RTCAPBLPEN_Pos (16U) +#define RCC_APB4LPENR_RTCAPBLPEN_Msk (0x1UL << RCC_APB4LPENR_RTCAPBLPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4LPENR_RTCAPBLPEN RCC_APB4LPENR_RTCAPBLPEN_Msk +#define RCC_APB4LPENR_DTSLPEN_Pos (26U) +#define RCC_APB4LPENR_DTSLPEN_Msk (0x1UL << RCC_APB4LPENR_DTSLPEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4LPENR_DTSLPEN RCC_APB4LPENR_DTSLPEN_Msk + +/******************** Bit definition for RCC_APB5LPENR register *************/ +#define RCC_APB5LPENR_LTDCLPEN_Pos (1U) +#define RCC_APB5LPENR_LTDCLPEN_Msk (0x1UL << RCC_APB5LPENR_LTDCLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB5LPENR_LTDCLPEN RCC_APB5LPENR_LTDCLPEN_Msk +#define RCC_APB5LPENR_DCMIPPLPEN_Pos (2U) +#define RCC_APB5LPENR_DCMIPPLPEN_Msk (0x1UL << RCC_APB5LPENR_DCMIPPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5LPENR_DCMIPPLPEN RCC_APB5LPENR_DCMIPPLPEN_Msk +#define RCC_APB5LPENR_GFXTIMLPEN_Pos (4U) +#define RCC_APB5LPENR_GFXTIMLPEN_Msk (0x1UL << RCC_APB5LPENR_GFXTIMLPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5LPENR_GFXTIMLPEN RCC_APB5LPENR_GFXTIMLPEN_Msk + + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RNG_CR register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk +#define RNG_CR_ARDIS_Pos (7U) +#define RNG_CR_ARDIS_Msk (0x1UL << RNG_CR_ARDIS_Pos) +#define RNG_CR_ARDIS RNG_CR_ARDIS_Msk +#define RNG_CR_RNG_CONFIG3_Pos (8U) +#define RNG_CR_RNG_CONFIG3_Msk (0xFUL << RNG_CR_RNG_CONFIG3_Pos) +#define RNG_CR_RNG_CONFIG3 RNG_CR_RNG_CONFIG3_Msk +#define RNG_CR_NISTC_Pos (12U) +#define RNG_CR_NISTC_Msk (0x1UL << RNG_CR_NISTC_Pos) +#define RNG_CR_NISTC RNG_CR_NISTC_Msk +#define RNG_CR_RNG_CONFIG2_Pos (13U) +#define RNG_CR_RNG_CONFIG2_Msk (0x7UL << RNG_CR_RNG_CONFIG2_Pos) +#define RNG_CR_RNG_CONFIG2 RNG_CR_RNG_CONFIG2_Msk +#define RNG_CR_CLKDIV_Pos (16U) +#define RNG_CR_CLKDIV_Msk (0xFUL << RNG_CR_CLKDIV_Pos) +#define RNG_CR_CLKDIV RNG_CR_CLKDIV_Msk +#define RNG_CR_CLKDIV_0 (0x1UL << RNG_CR_CLKDIV_Pos) /*!< 0x00010000 */ +#define RNG_CR_CLKDIV_1 (0x2UL << RNG_CR_CLKDIV_Pos) /*!< 0x00020000 */ +#define RNG_CR_CLKDIV_2 (0x4UL << RNG_CR_CLKDIV_Pos) /*!< 0x00040000 */ +#define RNG_CR_CLKDIV_3 (0x8UL << RNG_CR_CLKDIV_Pos) /*!< 0x00080000 */ +#define RNG_CR_RNG_CONFIG1_Pos (20U) +#define RNG_CR_RNG_CONFIG1_Msk (0x3FUL << RNG_CR_RNG_CONFIG1_Pos) +#define RNG_CR_RNG_CONFIG1 RNG_CR_RNG_CONFIG1_Msk +#define RNG_CR_CONDRST_Pos (30U) +#define RNG_CR_CONDRST_Msk (0x1UL << RNG_CR_CONDRST_Pos) +#define RNG_CR_CONDRST RNG_CR_CONDRST_Msk +#define RNG_CR_CONFIGLOCK_Pos (31U) +#define RNG_CR_CONFIGLOCK_Msk (0x1UL << RNG_CR_CONFIGLOCK_Pos) +#define RNG_CR_CONFIGLOCK RNG_CR_CONFIGLOCK_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************** Bits definition for RNG_HTCR register *******************/ +#define RNG_HTCR_HTCFG_Pos (0U) +#define RNG_HTCR_HTCFG_Msk (0xFFFFFFFFUL << RNG_HTCR_HTCFG_Pos) /*!< 0xFFFFFFFF */ +#define RNG_HTCR_HTCFG RNG_HTCR_HTCFG_Msk + + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk +#define RTC_TR_SU_0 (0x1UL << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2UL << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4UL << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8UL << RTC_TR_SU_Pos) /*!< 0x00000008 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk +#define RTC_TR_ST_0 (0x1UL << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2UL << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4UL << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk +#define RTC_TR_MNU_0 (0x1UL << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2UL << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4UL << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8UL << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk +#define RTC_TR_MNT_0 (0x1UL << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2UL << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4UL << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk +#define RTC_TR_HU_0 (0x1UL << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2UL << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4UL << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8UL << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk +#define RTC_TR_HT_0 (0x1UL << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2UL << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk +#define RTC_DR_DU_0 (0x1UL << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2UL << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4UL << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8UL << RTC_DR_DU_Pos) /*!< 0x00000008 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk +#define RTC_DR_DT_0 (0x1UL << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2UL << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk +#define RTC_DR_MU_0 (0x1UL << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2UL << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4UL << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8UL << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk +#define RTC_DR_WDU_0 (0x1UL << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2UL << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4UL << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk +#define RTC_DR_YU_0 (0x1UL << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2UL << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4UL << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8UL << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk +#define RTC_DR_YT_0 (0x1UL << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2UL << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4UL << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8UL << RTC_DR_YT_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFFFFFUL << RTC_SSR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk + +/******************** Bits definition for RTC_ICSR register ******************/ +#define RTC_ICSR_WUTWF_Pos (2U) +#define RTC_ICSR_WUTWF_Msk (0x1UL << RTC_ICSR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ICSR_WUTWF RTC_ICSR_WUTWF_Msk +#define RTC_ICSR_SHPF_Pos (3U) +#define RTC_ICSR_SHPF_Msk (0x1UL << RTC_ICSR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ICSR_SHPF RTC_ICSR_SHPF_Msk +#define RTC_ICSR_INITS_Pos (4U) +#define RTC_ICSR_INITS_Msk (0x1UL << RTC_ICSR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ICSR_INITS RTC_ICSR_INITS_Msk +#define RTC_ICSR_RSF_Pos (5U) +#define RTC_ICSR_RSF_Msk (0x1UL << RTC_ICSR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ICSR_RSF RTC_ICSR_RSF_Msk +#define RTC_ICSR_INITF_Pos (6U) +#define RTC_ICSR_INITF_Msk (0x1UL << RTC_ICSR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ICSR_INITF RTC_ICSR_INITF_Msk +#define RTC_ICSR_INIT_Pos (7U) +#define RTC_ICSR_INIT_Msk (0x1UL << RTC_ICSR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ICSR_INIT RTC_ICSR_INIT_Msk +#define RTC_ICSR_BIN_Pos (8U) +#define RTC_ICSR_BIN_Msk (0x3UL << RTC_ICSR_BIN_Pos) /*!< 0x00000300 */ +#define RTC_ICSR_BIN RTC_ICSR_BIN_Msk +#define RTC_ICSR_BIN_0 (0x1UL << RTC_ICSR_BIN_Pos) /*!< 0x00000100 */ +#define RTC_ICSR_BIN_1 (0x2UL << RTC_ICSR_BIN_Pos) /*!< 0x00000200 */ +#define RTC_ICSR_BCDU_Pos (10U) +#define RTC_ICSR_BCDU_Msk (0x7UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001C00 */ +#define RTC_ICSR_BCDU RTC_ICSR_BCDU_Msk +#define RTC_ICSR_BCDU_0 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000400 */ +#define RTC_ICSR_BCDU_1 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000800 */ +#define RTC_ICSR_BCDU_2 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001000 */ +#define RTC_ICSR_RECALPF_Pos (16U) +#define RTC_ICSR_RECALPF_Msk (0x1UL << RTC_ICSR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ICSR_RECALPF RTC_ICSR_RECALPF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk +#define RTC_WUTR_WUTOCLR_Pos (16U) +#define RTC_WUTR_WUTOCLR_Msk (0xFFFFUL << RTC_WUTR_WUTOCLR_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUTOCLR RTC_WUTR_WUTOCLR_Msk + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_SSRUIE_Pos (7U) +#define RTC_CR_SSRUIE_Msk (0x1UL << RTC_CR_SSRUIE_Pos) /*!< 0x00000080 */ +#define RTC_CR_SSRUIE RTC_CR_SSRUIE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*! */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0x3FUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_MASKSS_4 (0x10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMASSR_MASKSS_5 (0x20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMASSR_SSCLR_Pos (31U) +#define RTC_ALRMASSR_SSCLR_Msk (0x1UL << RTC_ALRMASSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMASSR_SSCLR RTC_ALRMASSR_SSCLR_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0x3FUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_MASKSS_4 (0x10UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBSSR_MASKSS_5 (0x20UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBSSR_SSCLR_Pos (31U) +#define RTC_ALRMBSSR_SSCLR_Msk (0x1UL << RTC_ALRMBSSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBSSR_SSCLR RTC_ALRMBSSR_SSCLR_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_SSRUF_Pos (6U) +#define RTC_SR_SSRUF_Msk (0x1UL << RTC_SR_SSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SR_SSRUF RTC_SR_SSRUF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_SSRUMF_Pos (6U) +#define RTC_MISR_SSRUMF_Msk (0x1UL << RTC_MISR_SSRUMF_Pos) /*!< 0x00000040 */ +#define RTC_MISR_SSRUMF RTC_MISR_SSRUMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CSSRUF_Pos (6U) +#define RTC_SCR_CSSRUF_Msk (0x1UL << RTC_SCR_CSSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SCR_CSSRUF RTC_SCR_CSSRUF_Msk + +/******************** Bits definition for RTC_ALRABINR register ******************/ +#define RTC_ALRABINR_SS_Pos (0U) +#define RTC_ALRABINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRABINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRABINR_SS RTC_ALRABINR_SS_Msk + +/******************** Bits definition for RTC_ALRBBINR register ******************/ +#define RTC_ALRBBINR_SS_Pos (0U) +#define RTC_ALRBBINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRBBINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRBBINR_SS RTC_ALRBBINR_SS_Msk + + +/******************************************************************************/ +/* */ +/* Serial Audio Interface */ +/* */ +/******************************************************************************/ +/******************** Bit definition for SAI_GCR register *******************/ +#define SAI_GCR_SYNCIN_Pos (0U) +#define SAI_GCR_SYNCIN_Msk (0x3UL << SAI_GCR_SYNCIN_Pos) /*!< 0x00000003 */ +#define SAI_GCR_SYNCIN SAI_GCR_SYNCIN_Msk /*! /*!< ARM Cortex-M7 processor and core peripherals */ +#include "system_stm32h7rsxx.h" /*!< STM32H7RSxx System */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_peripherals + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + uint32_t RESERVED10[4];/*!< Reserved, 0x0B8 - 0x0BC */ + __IO uint32_t OR; /*!< ADC option register, Address offset: 0xC8 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: 0x300 + 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x300 + 0x04 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: 0x300 + 0x08 */ + __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: 0x300 + 0x0C */ +} ADC_Common_TypeDef; + +/** + * @brief AXIM ASIB + */ +typedef struct +{ + uint32_t RESERVED1[9]; /*!< Reserved, Address offset: 0x00-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM ASIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[54]; /*!< Reserved, Address offset: 0x28-0xFC */ + __IO uint32_t READQOS; /*!< AXIM ASIB read_qos register Address offset: 0x100 */ + __IO uint32_t WRITEQOS; /*!< AXIM ASIB write_qos register Address offset: 0x104 */ + __IO uint32_t FNMOD; /*!< AXIM ASIB fn_mod register Address offset: 0x108 */ +} AXIM_ASIB_TypeDef; + +typedef struct +{ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x00-0x04 */ + __IO uint32_t FNMODBMISS; /*!< AXIM AMIB fn_mod_bm_iss register Address offset: 0x08 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x0C-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM AMIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[1]; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t FNMODLB; /*!< AXIM AMIB fn_mod_lb register Address offset: 0x2C */ + uint32_t RESERVED5[54]; /*!< Reserved, Address offset: 0x30-0x104 */ + __IO uint32_t FNMOD; /*!< AXIM AMIB fn_mod register Address offset: 0x108 */ +} AXIM_AMIB_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +} CEC_TypeDef; + +/** + * @brief CORDIC + */ +typedef struct +{ + __IO uint32_t CSR; /*!< CORDIC Control and Status register, Address offset: 0x00 */ + __IO uint32_t WDATA; /*!< CORDIC argument register, Address offset: 0x04 */ + __IO uint32_t RDATA; /*!< CORDIC result register, Address offset: 0x08 */ +} CORDIC_TypeDef; + +/** + * @brief GFXTIM + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXTIM configuration register, Address offset: 0x00 */ + __IO uint32_t CGCR; /*!< GFXTIM clock generator configuration register, Address offset: 0x04 */ + __IO uint32_t TCR; /*!< GFXTIM timers configuration register, Address offset: 0x08 */ + __IO uint32_t TDR; /*!< GFXTIM timers disable register, Address offset: 0x0C */ + __IO uint32_t EVCR; /*!< GFXTIM events control register, Address offset: 0x10 */ + __IO uint32_t EVSR; /*!< GFXTIM events selection register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t WDGTCR; /*!< GFXTIM watchdog timer configuration register, Address offset: 0x20 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t ISR; /*!< GFXTIM interrupt status register, Address offset: 0x30 */ + __IO uint32_t ICR; /*!< GFXTIM interrupt clear register, Address offset: 0x34 */ + __IO uint32_t IER; /*!< GFXTIM interrupt enable register, Address offset: 0x38 */ + __IO uint32_t TSR; /*!< GFXTIM timers status register, Address offset: 0x3C */ + __IO uint32_t LCCRR; /*!< GFXTIM line clock counter reload register, Address offset: 0x40 */ + __IO uint32_t FCCRR; /*!< GFXTIM frame clock counter reload register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x48-0x4C */ + __IO uint32_t ATR; /*!< GFXTIM absolute time register, Address offset: 0x50 */ + __IO uint32_t AFCR; /*!< GFXTIM absolute frame counter register, Address offset: 0x54 */ + __IO uint32_t ALCR; /*!< GFXTIM absolute line counter register, Address offset: 0x58 */ + uint32_t RESERVED4[1]; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t AFCC1R; /*!< GFXTIM absolute frame counter compare 1 register, Address offset: 0x60 */ + uint32_t RESERVED5[3]; /*!< Reserved, Address offset: 0x64-0X6C */ + __IO uint32_t ALCC1R; /*!< GFXTIM absolute line counter compare 1 register, Address offset: 0x70 */ + __IO uint32_t ALCC2R; /*!< GFXTIM absolute line counter compare 2 register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, Address offset: 0x78-0X7C */ + __IO uint32_t RFC1R; /*!< GFXTIM relative frame counter 1 register, Address offset: 0x80 */ + __IO uint32_t RFC1RR; /*!< GFXTIM relative frame counter 1 reload register, Address offset: 0x84 */ + __IO uint32_t RFC2R; /*!< GFXTIM relative frame counter 2 register, Address offset: 0x88 */ + __IO uint32_t RFC2RR; /*!< GFXTIM relative frame counter 2 reload register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x90-0X9C */ + __IO uint32_t WDGCR; /*!< GFXTIM watchdog counter register, Address offset: 0xA0 */ + __IO uint32_t WDGRR; /*!< GFXTIM watchdog reload register, Address offset: 0xA4 */ + __IO uint32_t WDGPAR; /*!< GFXTIM watchdog pre-alarm register, Address offset: 0xA8 */ + uint32_t RESERVED8[209]; /*!< Reserved, Address offset: 0xAC-0X3EC */ + __IO uint32_t HWCFGR; /*!< GFXTIM HW configuration register, Address offset: 0x3F0 */ + __IO uint32_t VERR; /*!< GFXTIM version register, Address offset: 0x3F4 */ + __IO uint32_t IPIDR; /*!< GFXTIM identification register, Address offset: 0x3F8 */ + __IO uint32_t SIDR; /*!< GFXTIM size identification register, Address offset: 0x3FC */ +} GFXTIM_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Cryp Processor + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DIN; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ + __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ + __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ + __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ + __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ + __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ + __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ + __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ + __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ + __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ + __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ + __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ + __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ + __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ + __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ + __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ +} CRYP_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[5]; /*!< Reserved, Address offset: 0x08-0x18 */ + __IO uint32_t AHB5FZR; /*!< Debug MCU AHB5FZR freeze register, Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t AHB1FZR; /*!< Debug MCU AHB1FZR freeze register, Address offset: 0x24 */ + uint32_t RESERVED3[5]; /*!< Reserved, Address offset: 0x28-0x38 */ + __IO uint32_t APB1FZR; /*!< Debug MCU APB1FZR freeze register, Address offset: 0x3C */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x40-0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU APB2FZR freeze register, Address offset: 0x4C */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t APB4FZR; /*!< Debug MCU APB4FZR freeze register, Address offset: 0x54 */ + uint32_t RESERVED6[41]; /*!< Reserved, Address offset: 0x58-0xF8 */ + __IO uint32_t SR; /*!< Debug MCU status register, Address offset: 0xFC */ + __IO uint32_t DBG_AUTH_HOST; /*!< Debug MCU Authentication Host register, Address offset: 0x100 */ + __IO uint32_t DBG_AUTH_DEV; /*!< Debug MCU Authentication Device register, Address offset: 0x104 */ + __IO uint32_t DBG_AUTH_ACK; /*!< Debug MCU Authentication Ack register, Address offset: 0x108 */ + uint32_t RESERVED7[945]; /*!< Reserved, Address offset: 0x10C-0xFCC */ + __IO uint32_t PIDR4; /*!< Debug MCU peripheral identity register 4, Address offset: 0xFD0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xFD4-0xFDC */ + __IO uint32_t PIDR0; /*!< Debug MCU peripheral identity register 0, Address offset: 0xFE0 */ + __IO uint32_t PIDR1; /*!< Debug MCU peripheral identity register 1, Address offset: 0xFE4 */ + __IO uint32_t PIDR2; /*!< Debug MCU peripheral identity register 2, Address offset: 0xFE8 */ + __IO uint32_t PIDR3; /*!< Debug MCU peripheral identity register 3, Address offset: 0xFEC */ + __IO uint32_t CIDR0; /*!< Debug MCU component identity register 0, Address offset: 0xFF0 */ + __IO uint32_t CIDR1; /*!< Debug MCU component identity register 1, Address offset: 0xFF4 */ + __IO uint32_t CIDR2; /*!< Debug MCU component identity register 2, Address offset: 0xFF8 */ + __IO uint32_t CIDR3; /*!< Debug MCU component identity register 3, Address offset: 0xFFC */ +} DBGMCU_TypeDef; + +/** + * @brief DCMIPP + */ +typedef struct +{ + __IO uint32_t IPGR1; /*!< IP-Plug global register 1 Address offset: 0x00 */ + __IO uint32_t IPGR2; /*!< IP-Plug global register 2 Address offset: 0x04 */ + __IO uint32_t IPGR3; /*!< IP-Plug global register 3 Address offset: 0x08 */ + uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x0C-0x18 */ + __IO uint32_t IPGR8; /*!< IP-Plug global register 8 Address offset: 0x1C */ + __IO uint32_t IPC1R1; /*!< IP-Plug client 1 register 1 Address offset: 0x20 */ + __IO uint32_t IPC1R2; /*!< IP-Plug client 1 register 2 Address offset: 0x24 */ + __IO uint32_t IPC1R3; /*!< IP-Plug client 1 register 3 Address offset: 0x28 */ + __IO uint32_t RESERVED2[54]; /*!< Reserved, Address offset: 0x2C-0x100 */ + __IO uint32_t PRCR; /*!< Parallel interface control register Address offset: 0x104 */ + __IO uint32_t PRESCR; /*!< Parallel interface embedded sync code register Address offset: 0x108 */ + __IO uint32_t PRESUR; /*!< Parallel interface embedded sync unmask register Address offset: 0x10C */ + __IO uint32_t RESERVED3[57]; /*!< Reserved, Address offset: 0x110-0x1F0 */ + __IO uint32_t PRIER; /*!< Parallel interface interrupt enable register Address offset: 0x1F4 */ + __IO uint32_t PRSR; /*!< Parallel interface status register Address offset: 0x1F8 */ + __IO uint32_t PRFCR; /*!< Parallel interface interrupt clear register Address offset: 0x1FC */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x200 */ + __IO uint32_t CMCR; /*!< Common configuration register Address offset: 0x204 */ + __IO uint32_t CMFRCR; /*!< Common frame counter register Address offset: 0x208 */ + __IO uint32_t RESERVED5[121]; /*!< Reserved, Address offset: 0x20C-0x3EC */ + __IO uint32_t CMIER; /*!< Common interrupt enable register Address offset: 0x3F0 */ + __IO uint32_t CMSR1; /*!< Common status register 1 Address offset: 0x3F4 */ + __IO uint32_t CMSR2; /*!< Common status register 2 Address offset: 0x3F8 */ + __IO uint32_t CMFCR; /*!< Common interrupt clear register Address offset: 0x3FC */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x400 */ + __IO uint32_t P0FSCR; /*!< Pipe0 flow selection configuration register Address offset: 0x404 */ + __IO uint32_t RESERVED7[62]; /*!< Reserved, Address offset: 0x408-0x4FC */ + __IO uint32_t P0FCTCR; /*!< Pipe0 flow control configuration register Address offset: 0x500 */ + __IO uint32_t P0SCSTR; /*!< Pipe0 stat/crop start register Address offset: 0x504 */ + __IO uint32_t P0SCSZR; /*!< Pipe0 stat/crop size register Address offset: 0x508 */ + __IO uint32_t RESERVED8[41]; /*!< Reserved, Address offset: 0x50C-0x5AC */ + __IO uint32_t P0DCCNTR; /*!< Pipe0 dump counter register Address offset: 0x5B0 */ + __IO uint32_t P0DCLMTR; /*!< Pipe0 dump limit register Address offset: 0x5B4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x5B8-0x5BC */ + __IO uint32_t P0PPCR; /*!< Pipe0 pixel packer configuration register Address offset: 0x5C0 */ + __IO uint32_t P0PPM0AR1; /*!< Pipe0 pixel packer memory0 address register 1 Address offset: 0x5C4 */ + __IO uint32_t P0PPM0AR2; /*!< Pipe0 pixel packer memory0 address register 2 Address offset: 0x5C8 */ + __IO uint32_t RESERVED10[10]; /*!< Reserved, Address offset: 0x5CC-0x5F0 */ + __IO uint32_t P0IER; /*!< Pipe0 interrupt enable register Address offset: 0x5F4 */ + __IO uint32_t P0SR; /*!< Pipe0 status register Address offset: 0x5F8 */ + __IO uint32_t P0FCR; /*!< Pipe0 interrupt clear register Address offset: 0x5FC */ + __IO uint32_t RESERVED11[64]; /*!< Reserved, Address offset: 0x600-0x6FC */ + __IO uint32_t P0CFCTCR; /*!< Pipe0 current flow control configuration register Address offset: 0x700 */ + __IO uint32_t P0CSCSTR; /*!< Pipe0 current stat/crop start register Address offset: 0x704 */ + __IO uint32_t P0CSCSZR; /*!< Pipe0 current stat/crop size register Address offset: 0x708 */ + __IO uint32_t RESERVED12[45]; /*!< Reserved, Address offset: 0x70C-0x7BC */ + __IO uint32_t P0CPPCR; /*!< Pipe0 current pixel packer configuration register Address offset: 0x700 */ + __IO uint32_t P0CPPM0AR1; /*!< Pipe0 current pixel packer memory0 address register 1 Address offset: 0x7C4 */ + __IO uint32_t P0CPPM0AR2; /*!< Pipe0 current pixel packer memory0 address register 2 Address offset: 0x7C8 */ +} DCMIPP_TypeDef; + +/** + * @ brief Delay Block + */ +typedef struct +{ + __IO uint32_t CR; /*!< Delay Block Control Register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< Delay Block Configuration Register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved 1, Address offset: 0x00 */ + __IO uint32_t PRIVCFGR; /*!< DMA privileged configuration register, Address offset: 0x04 */ + __IO uint32_t RCFGLOCKR; /*!< DMA configuration lock register, Address offset: 0x08 */ + __IO uint32_t MISR; /*!< DMA masked interrupt status register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CLBAR; /*!< DMA channel x linked-list base address register, Address offset: 0x50 + (x * 0x80) */ + uint32_t RESERVED1[2]; /*!< Reserved 1, Address offset: 0x54 -- 0x58 */ + __IO uint32_t CFCR; /*!< DMA channel x flag clear register, Address offset: 0x5C + (x * 0x80) */ + __IO uint32_t CSR; /*!< DMA channel x flag status register, Address offset: 0x60 + (x * 0x80) */ + __IO uint32_t CCR; /*!< DMA channel x control register, Address offset: 0x64 + (x * 0x80) */ + uint32_t RESERVED2[10]; /*!< Reserved 2, Address offset: 0x68 -- 0x8C */ + __IO uint32_t CTR1; /*!< DMA channel x transfer register 1, Address offset: 0x90 + (x * 0x80) */ + __IO uint32_t CTR2; /*!< DMA channel x transfer register 2, Address offset: 0x94 + (x * 0x80) */ + __IO uint32_t CBR1; /*!< DMA channel x block register 1, Address offset: 0x98 + (x * 0x80) */ + __IO uint32_t CSAR; /*!< DMA channel x source address register, Address offset: 0x9C + (x * 0x80) */ + __IO uint32_t CDAR; /*!< DMA channel x destination address register, Address offset: 0xA0 + (x * 0x80) */ + __IO uint32_t CTR3; /*!< DMA channel x transfer register 3, Address offset: 0xA4 + (x * 0x80) */ + __IO uint32_t CBR2; /*!< DMA channel x block register 2, Address offset: 0xA8 + (x * 0x80) */ + uint32_t RESERVED3[8]; /*!< Reserved 3, Address offset: 0xAC -- 0xC8 */ + __IO uint32_t CLLR; /*!< DMA channel x linked-list address register, Address offset: 0xCC + (x * 0x80) */ +} DMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ +} DMA2D_TypeDef; + +/** + * @brief DTS + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< DTS configuration register, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t T0VALR1; /*!< DTS T0 Value register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x0C */ + __IO uint32_t RAMPVALR; /*!< DTS Ramp value register, Address offset: 0x10 */ + __IO uint32_t ITR1; /*!< DTS Interrupt threshold register, Address offset: 0x14 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t DR; /*!< DTS data register, Address offset: 0x1C */ + __IO uint32_t SR; /*!< DTS status register Address offset: 0x20 */ + __IO uint32_t ITENR; /*!< DTS Interrupt enable register, Address offset: 0x24 */ + __IO uint32_t ICIFR; /*!< DTS Clear Interrupt flag register, Address offset: 0x28 */ + __IO uint32_t OR; /*!< DTS option register 1, Address offset: 0x2C */ +} DTS_TypeDef; + +/** + * @brief Ethernet MAC + */ +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACECR; + __IO uint32_t MACPFR; + __IO uint32_t MACWTR; + __IO uint32_t MACHT0R; + __IO uint32_t MACHT1R; + uint32_t RESERVED1[14]; + __IO uint32_t MACVTR; + uint32_t RESERVED2; + __IO uint32_t MACVHTR; + uint32_t RESERVED3; + __IO uint32_t MACVIR; + __IO uint32_t MACIVIR; + uint32_t RESERVED4[2]; + __IO uint32_t MACTFCR; + uint32_t RESERVED5[7]; + __IO uint32_t MACRFCR; + uint32_t RESERVED6[7]; + __IO uint32_t MACISR; + __IO uint32_t MACIER; + __IO uint32_t MACRXTXSR; + uint32_t RESERVED7; + __IO uint32_t MACPCSR; + __IO uint32_t MACRWKPFR; + uint32_t RESERVED8[2]; + __IO uint32_t MACLCSR; + __IO uint32_t MACLTCR; + __IO uint32_t MACLETR; + __IO uint32_t MAC1USTCR; + uint32_t RESERVED9[12]; + __IO uint32_t MACVR; + __IO uint32_t MACDR; + uint32_t RESERVED10; + __IO uint32_t MACHWF0R; + __IO uint32_t MACHWF1R; + __IO uint32_t MACHWF2R; + uint32_t RESERVED11[54]; + __IO uint32_t MACMDIOAR; + __IO uint32_t MACMDIODR; + uint32_t RESERVED12[2]; + __IO uint32_t MACARPAR; + uint32_t RESERVED13[59]; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; + uint32_t RESERVED14[248]; + __IO uint32_t MMCCR; + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; + uint32_t RESERVED15[14]; + __IO uint32_t MMCTSCGPR; + __IO uint32_t MMCTMCGPR; + uint32_t RESERVED16[5]; + __IO uint32_t MMCTPCGR; + uint32_t RESERVED17[10]; + __IO uint32_t MMCRCRCEPR; + __IO uint32_t MMCRAEPR; + uint32_t RESERVED18[10]; + __IO uint32_t MMCRUPGR; + uint32_t RESERVED19[9]; + __IO uint32_t MMCTLPIMSTR; + __IO uint32_t MMCTLPITCR; + __IO uint32_t MMCRLPIMSTR; + __IO uint32_t MMCRLPITCR; + uint32_t RESERVED20[65]; + __IO uint32_t MACL3L4C0R; + __IO uint32_t MACL4A0R; + uint32_t RESERVED21[2]; + __IO uint32_t MACL3A0R0R; + __IO uint32_t MACL3A1R0R; + __IO uint32_t MACL3A2R0R; + __IO uint32_t MACL3A3R0R; + uint32_t RESERVED22[4]; + __IO uint32_t MACL3L4C1R; + __IO uint32_t MACL4A1R; + uint32_t RESERVED23[2]; + __IO uint32_t MACL3A0R1R; + __IO uint32_t MACL3A1R1R; + __IO uint32_t MACL3A2R1R; + __IO uint32_t MACL3A3R1R; + uint32_t RESERVED24[108]; + __IO uint32_t MACTSCR; + __IO uint32_t MACSSIR; + __IO uint32_t MACSTSR; + __IO uint32_t MACSTNR; + __IO uint32_t MACSTSUR; + __IO uint32_t MACSTNUR; + __IO uint32_t MACTSAR; + uint32_t RESERVED25; + __IO uint32_t MACTSSR; + uint32_t RESERVED26[3]; + __IO uint32_t MACTTSSNR; + __IO uint32_t MACTTSSSR; + uint32_t RESERVED27[2]; + __IO uint32_t MACACR; + uint32_t RESERVED28; + __IO uint32_t MACATSNR; + __IO uint32_t MACATSSR; + __IO uint32_t MACTSIACR; + __IO uint32_t MACTSEACR; + __IO uint32_t MACTSICNR; + __IO uint32_t MACTSECNR; + uint32_t RESERVED29[4]; + __IO uint32_t MACPPSCR; + uint32_t RESERVED30[3]; + __IO uint32_t MACPPSTTSR; + __IO uint32_t MACPPSTTNR; + __IO uint32_t MACPPSIR; + __IO uint32_t MACPPSWR; + uint32_t RESERVED31[12]; + __IO uint32_t MACPOCR; + __IO uint32_t MACSPI0R; + __IO uint32_t MACSPI1R; + __IO uint32_t MACSPI2R; + __IO uint32_t MACLMIR; + uint32_t RESERVED32[11]; + __IO uint32_t MTLOMR; + uint32_t RESERVED33[7]; + __IO uint32_t MTLISR; + uint32_t RESERVED34[55]; + __IO uint32_t MTLTQOMR; + __IO uint32_t MTLTQUR; + __IO uint32_t MTLTQDR; + uint32_t RESERVED35[8]; + __IO uint32_t MTLQICSR; + __IO uint32_t MTLRQOMR; + __IO uint32_t MTLRQMPOCR; + __IO uint32_t MTLRQDR; + uint32_t RESERVED36[177]; + __IO uint32_t DMAMR; + __IO uint32_t DMASBMR; + __IO uint32_t DMAISR; + __IO uint32_t DMADSR; + uint32_t RESERVED37[60]; + __IO uint32_t DMACCR; + __IO uint32_t DMACTCR; + __IO uint32_t DMACRCR; + uint32_t RESERVED38[2]; + __IO uint32_t DMACTDLAR; + uint32_t RESERVED39; + __IO uint32_t DMACRDLAR; + __IO uint32_t DMACTDTPR; + uint32_t RESERVED40; + __IO uint32_t DMACRDTPR; + __IO uint32_t DMACTDRLR; + __IO uint32_t DMACRDRLR; + __IO uint32_t DMACIER; + __IO uint32_t DMACRIWTR; +__IO uint32_t DMACSFCSR; + uint32_t RESERVED41; + __IO uint32_t DMACCATDR; + uint32_t RESERVED42; + __IO uint32_t DMACCARDR; + uint32_t RESERVED43; + __IO uint32_t DMACCATBR; + uint32_t RESERVED44; + __IO uint32_t DMACCARBR; + __IO uint32_t DMACSR; +uint32_t RESERVED45[2]; +__IO uint32_t DMACMFCR; +}ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x08 */ + uint32_t RESERVED1[5]; /*!< Reserved 1, Address offset: 0x0C-0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x28 */ + uint32_t RESERVED2[21]; /*!< Reserved 2, Address offset: 0x2C-0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x84 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x88 */ + uint32_t RESERVED3; /*!< Reserved 3, Address offset: 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x94 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x98 */ + uint32_t RESERVED4; /*!< Reserved 4, Address offset: 0x9C */ + __IO uint32_t IMR3; /*!< EXTI Interrupt mask register 3, Address offset: 0xA0 */ + __IO uint32_t EMR3; /*!< EXTI Event mask register 3, Address offset: 0xA4 */ +} EXTI_TypeDef; + +/** + * @brief FD Controller Area Network + */ +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ + uint32_t RESERVED1[128];/*!< Reserved, 0x100 + 0x004 - 0x100 + 0x200 */ + __IO uint32_t OPTR; /*!< FDCAN option register, Address offset: 0x100 + 0x204 */ + uint32_t RESERVED2[58]; /*!< Reserved, 0x100 + 0x208 - 0x100 + 0x2EC */ + __IO uint32_t HWCFG; /*!< FDCAN hardware configuration register, Address offset: 0x100 + 0x2F0 */ + __IO uint32_t VERR; /*!< FDCAN IP version register, Address offset: 0x100 + 0x2F4 */ + __IO uint32_t IPIDR; /*!< FDCAN IP ID register, Address offset: 0x100 + 0x2F8 */ + __IO uint32_t SIDR; /*!< FDCAN size ID register, Address offset: 0x100 + 0x2FC */ +} FDCAN_Config_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x000 */ + __IO uint32_t KEYR; /*!< FLASH control key register, Address offset: 0x004 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x008 - 0x00C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x010 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t IER; /*!< FLASH interrupt enable register, Address offset: 0x020 */ + __IO uint32_t ISR; /*!< FLASH interrupt status register, Address offset: 0x024 */ + __IO uint32_t ICR; /*!< FLASH interrupt clear register, Address offset: 0x028 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x02C */ + __IO uint32_t CRCCR; /*!< FLASH CRC control register, Address offset: 0x030 */ + __IO uint32_t CRCSADDR; /*!< FLASH CRC start address register, Address offset: 0x034 */ + __IO uint32_t CRCEADDR; /*!< FLASH CRC end address register, Address offset: 0x038 */ + __IO uint32_t CRCDATAR; /*!< FLASH CRC data register, Address offset: 0x03C */ + __IO uint32_t ECCSFADDR; /*!< FLASH ECC single fail address register, Address offset: 0x040 */ + __IO uint32_t ECCDFADDR; /*!< FLASH ECC double fail address register, Address offset: 0x044 */ + uint32_t RESERVED4[46]; /*!< Reserved, Address offset: 0x048 - 0x0FC */ + __IO uint32_t OPTKEYR; /*!< FLASH options key register, Address offset: 0x100 */ + __IO uint32_t OPTCR; /*!< FLASH options control register, Address offset: 0x104 */ + __IO uint32_t OPTISR; /*!< FLASH options interrupt status register, Address offset: 0x108 */ + __IO uint32_t OPTICR; /*!< FLASH options interrupt clear register, Address offset: 0x10C */ + __IO uint32_t OBKCR; /*!< FLASH option byte key control register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x114 */ + __IO uint32_t OBKDR[8]; /*!< FLASH option bytes key data register, Address offset: 0x118 - 0x134 */ + uint32_t RESERVED6[50]; /*!< Reserved, Address offset: 0x138 - 0x1FC */ + __IO uint32_t NVSR; /*!< FLASH non-volatile status register, Address offset: 0x200 */ + __IO uint32_t NVSRP; /*!< FLASH security status register programming, Address offset: 0x204 */ + __IO uint32_t ROTSR; /*!< FLASH RoT status register, Address offset: 0x208 */ + __IO uint32_t ROTSRP; /*!< FLASH RoT status register programming, Address offset: 0x20C */ + __IO uint32_t OTPLSR; /*!< FLASH OTP lock status register, Address offset: 0x210 */ + __IO uint32_t OTPLSRP; /*!< FLASH OTP lock status programming register, Address offset: 0x214 */ + __IO uint32_t WRPSR; /*!< FLASH write protection status register, Address offset: 0x218 */ + __IO uint32_t WRPSRP; /*!< FLASH write protection status register programming, Address offset: 0x21C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x220 - 0x22C */ + __IO uint32_t HDPSR; /*!< FLASH hide protection status register, Address offset: 0x230 */ + __IO uint32_t HDPSRP; /*!< FLASH hide protection status register programming, Address offset: 0x234 */ + uint32_t RESERVED8[6]; /*!< Reserved, Address offset: 0x238 - 0x24C */ + __IO uint32_t EPOCHSR; /*!< FLASH epoch status register, Address offset: 0x250 */ + __IO uint32_t EPOCHSRP; /*!< FLASH epoch status register programming, Address offset: 0x254 */ + uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x258 - 0x25C */ + __IO uint32_t OBW1SR; /*!< FLASH option byte word 1 status register, Address offset: 0x260 */ + __IO uint32_t OBW1SRP; /*!< FLASH option byte word 1 status register programming, Address offset: 0x264 */ + __IO uint32_t OBW2SR; /*!< FLASH option byte word 2 status register, Address offset: 0x268 */ + __IO uint32_t OBW2SRP; /*!< FLASH option byte word 2 status register programming, Address offset: 0x26C */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 + */ +typedef struct { + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 Extended + */ +typedef struct { + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ +typedef struct { + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 & 6 + */ +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140 - 0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148 - 0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief GFXMMU + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXMMU configuration register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< GFXMMU status register, Address offset: 0x04 */ + __IO uint32_t FCR; /*!< GFXMMU flag clear register, Address offset: 0x08 */ + uint32_t RESERVED0; /*!< Reserved0, Address offset: 0x0C */ + __IO uint32_t DVR; /*!< GFXMMU default value register, Address offset: 0x10 */ + __IO uint32_t DAR; /*!< GFXMMU default alpha register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved1, Address offset: 0x18 to 0x1C */ + __IO uint32_t B0CR; /*!< GFXMMU buffer 0 configuration register, Address offset: 0x20 */ + __IO uint32_t B1CR; /*!< GFXMMU buffer 1 configuration register, Address offset: 0x24 */ + __IO uint32_t B2CR; /*!< GFXMMU buffer 2 configuration register, Address offset: 0x28 */ + __IO uint32_t B3CR; /*!< GFXMMU buffer 3 configuration register, Address offset: 0x2C */ + uint32_t RESERVED2[1012]; /*!< Reserved2, Address offset: 0x30 to 0xFFC */ + __IO uint32_t LUT[2048]; /*!< GFXMMU LUT registers, Address offset: 0x1000 to 0x2FFC + For LUT line i, LUTiL = LUT[2*i] and LUTiH = LUT[(2*i)+1] */ +} GFXMMU_TypeDef; + +/** + * @brief HASH + */ +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[103]; /*!< HASH context swap registers, Address offset: 0x0F8-0x290 */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ +typedef struct +{ + __IO uint32_t HR[16]; /*!< HASH digest registers, Address offset: 0x310-0x34C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Improved Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< I3C Control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< I3C Controller Configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x08-0x0C */ + __IO uint32_t RDR; /*!< I3C Received Data register, Address offset: 0x10 */ + __IO uint32_t RDWR; /*!< I3C Received Data Word register, Address offset: 0x14 */ + __IO uint32_t TDR; /*!< I3C Transmit Data register, Address offset: 0x18 */ + __IO uint32_t TDWR; /*!< I3C Transmit Data Word register, Address offset: 0x1C */ + __IO uint32_t IBIDR; /*!< I3C IBI payload Data register, Address offset: 0x20 */ + __IO uint32_t TGTTDR; /*!< I3C Target Transmit register, Address offset: 0x24 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x28-0x2C */ + __IO uint32_t SR; /*!< I3C Status register, Address offset: 0x30 */ + __IO uint32_t SER; /*!< I3C Status Error register, Address offset: 0x34 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t RMR; /*!< I3C Received Message register, Address offset: 0x40 */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x44-0x4C */ + __IO uint32_t EVR; /*!< I3C Event register, Address offset: 0x50 */ + __IO uint32_t IER; /*!< I3C Interrupt Enable register, Address offset: 0x54 */ + __IO uint32_t CEVR; /*!< I3C Clear Event register, Address offset: 0x58 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t DEVR0; /*!< I3C own Target characteristics register, Address offset: 0x60 */ + __IO uint32_t DEVRX[4]; /*!< I3C Target x (1<=x<=4) register, Address offset: 0x64-0x70 */ + uint32_t RESERVED6[7]; /*!< Reserved, Address offset: 0x74-0x8C */ + __IO uint32_t MAXRLR; /*!< I3C Maximum Read Length register, Address offset: 0x90 */ + __IO uint32_t MAXWLR; /*!< I3C Maximum Write Length register, Address offset: 0x94 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0x98-0x9C */ + __IO uint32_t TIMINGR0; /*!< I3C Timing 0 register, Address offset: 0xA0 */ + __IO uint32_t TIMINGR1; /*!< I3C Timing 1 register, Address offset: 0xA4 */ + __IO uint32_t TIMINGR2; /*!< I3C Timing 2 register, Address offset: 0xA8 */ + uint32_t RESERVED9[5]; /*!< Reserved, Address offset: 0xAC-0xBC */ + __IO uint32_t BCR; /*!< I3C Bus Characteristics register, Address offset: 0xC0 */ + __IO uint32_t DCR; /*!< I3C Device Characteristics register, Address offset: 0xC4 */ + __IO uint32_t GETCAPR; /*!< I3C GET CAPabilities register, Address offset: 0xC8 */ + __IO uint32_t CRCAPR; /*!< I3C Controller CAPabilities register, Address offset: 0xCC */ + __IO uint32_t GETMXDSR; /*!< I3C GET Max Data Speed register, Address offset: 0xD0 */ + __IO uint32_t EPIDR; /*!< I3C Extended Provisioned ID register, Address offset: 0xD4 */ +} I3C_TypeDef; + + +/** + * @brief IWDG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ + __IO uint32_t EWCR; /*!< IWDG Early Wakeup register, Address offset: 0x14 */ +} IWDG_TypeDef; + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 0x00 */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 0x04 */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 0x08 */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0x0C */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 0x10 */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 0x14 */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 0x18 */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 0x1C */ + uint32_t RESERVED0[4]; /* Reserved Address offset: 0x20-0x2C */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 0x30 */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 0x34 */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 0x38 */ + uint32_t RESERVED1; /* Reserved Address offset: 0x3C */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 0x40 */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 0x44 */ + uint32_t RESERVED2[2]; /* Reserved Address offset: 0x48-0x4C */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 0x50-0x8C */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 0x90-0xCC */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: 0xD0-0x10C */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 0x110-0x14C */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 0x150-0x18C */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 0x190-0x20C */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 0x210-0x35C */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 0x360-0x4F8 */ + uint32_t RESERVED3; /* Reserved Address offset: 0x4FC */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 0x500-0x65C */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 0x660-0x7BC */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 0x7C0-0x7DC */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 0x7E0-0x7FC */ +} JPEG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t DIER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< LPTIM Capture/Compare register 1, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register 2, Address offset: 0x24 */ + __IO uint32_t RCR; /*!< LPTIM Repetition register, Address offset: 0x28 */ + __IO uint32_t CCMR1; /*!< LPTIM Capture/Compare mode register, Address offset: 0x2C */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x30 */ + __IO uint32_t CCR2; /*!< LPTIM Capture/Compare register 2, Address offset: 0x34 */ +} LPTIM_TypeDef; + +/** + * @brief Memory Cipher Engine (MCE) + */ +typedef struct +{ + __IO uint32_t REGCR; /*!< MCE region configuration register, Address offset: 0x040 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t SADDR; /*!< MCE region start address register, Address offset: 0x044 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t EADDR; /*!< MCE region end address register, Address offset: 0x048 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t ATTR; /*!< MCE region attribute register, Address offset: 0x04C + 0x10 * (x-1) (x = 1 to 4) */ +} MCE_Region_TypeDef; + +typedef struct +{ + __IO uint32_t CCCFGR; /*!< MCE cipher context configuration register, Address offset: 0x240 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCNR0; /*!< MCE cipher context nonce register 0, Address offset: 0x244 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCNR1; /*!< MCE cipher context nonce register 1, Address offset: 0x248 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR0; /*!< MCE cipher context key register 0, Address offset: 0x24C + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR1; /*!< MCE cipher context key register 1, Address offset: 0x250 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR2; /*!< MCE cipher context key register 2, Address offset: 0x254 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR3; /*!< MCE cipher context key register 3, Address offset: 0x258 + 0x30 * (x-1) (x = 1 to 2) */ +} MCE_Context_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< MCE configuration register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< MCE status register, Address offset: 0x004 */ + __IO uint32_t IASR; /*!< MCE illegal access status register, Address offset: 0x008 */ + __IO uint32_t IACR; /*!< MCE illegal access clear register, Address offset: 0x00C */ + __IO uint32_t IAIER; /*!< MCE illegal access interrupt enable register, Address offset: 0x010 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x014-0x018 */ + __IO uint32_t PRIVCFGR; /*!< MCE privileged configuration register, Address offset: 0x01C */ + __IO uint32_t IAESR; /*!< MCE illegal access error status register, Address offset: 0x020 */ + __IO uint32_t IADDR; /*!< MCE illegal address register, Address offset: 0x024 */ + uint32_t RESERVED2[118]; /*!< Reserved, Address offset: 0x028-0x1FC */ + __IO uint32_t MKEYR0; /*!< MCE master key register 0, Address offset: 0x200 */ + __IO uint32_t MKEYR1; /*!< MCE master key register 1, Address offset: 0x204 */ + __IO uint32_t MKEYR2; /*!< MCE master key register 2, Address offset: 0x208 */ + __IO uint32_t MKEYR3; /*!< MCE master key register 3, Address offset: 0x20C */ + uint32_t RESERVED3[4]; /*!< Reserved, Address offset: 0x210-0x21C */ + __IO uint32_t FMKEYR0; /*!< MCE fast master key register 0, Address offset: 0x220 */ + __IO uint32_t FMKEYR1; /*!< MCE fast master key register 1, Address offset: 0x224 */ + __IO uint32_t FMKEYR2; /*!< MCE fast master key register 2, Address offset: 0x228 */ + __IO uint32_t FMKEYR3; /*!< MCE fast master key register 3, Address offset: 0x22C */ +} MCE_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + +/** + * @brief ADF + */ +typedef struct +{ + __IO uint32_t GCR; /*!< MDF Global Control register, Address offset: 0x00 */ + __IO uint32_t CKGCR; /*!< MDF Clock Generator Control Register, Address offset: 0x04 */ +} MDF_TypeDef; + +/** + * @brief ADF filter + */ +typedef struct +{ + __IO uint32_t SITFCR; /*!< MDF Serial Interface Control Register, Address offset: 0x80 */ + __IO uint32_t BSMXCR; /*!< MDF Bitstream Matrix Control Register, Address offset: 0x84 */ + __IO uint32_t DFLTCR; /*!< MDF Digital Filter Control Register, Address offset: 0x88 */ + __IO uint32_t DFLTCICR; /*!< MDF MCIC Configuration Register, Address offset: 0x8C */ + __IO uint32_t DFLTRSFR; /*!< MDF Reshape Filter Configuration Register, Address offset: 0x90 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x94-0xA0 */ + __IO uint32_t DLYCR; /*!< MDF Delay control Register, Address offset: 0xA4 */ + uint32_t RESERVED1[1]; /*!< Reserved, 0xA8 */ + __IO uint32_t DFLTIER; /*!< MDF DFLT Interrupt enable Register, Address offset: 0xAC */ + __IO uint32_t DFLTISR; /*!< MDF DFLT Interrupt status Register, Address offset: 0xB0 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0xB4 */ + __IO uint32_t SADCR; /*!< MDF SAD Control Register, Address offset: 0xB8 */ + __IO uint32_t SADCFGR; /*!< MDF SAD configuration register, Address offset: 0xBC */ + __IO uint32_t SADSDLVR; /*!< MDF SAD Sound level Register, Address offset: 0xC0 */ + __IO uint32_t SADANLVR; /*!< MDF SAD Ambient Noise level Register, Address offset: 0xC4 */ + uint32_t RESERVED3[10]; /*!< Reserved, 0xC8-0xEC */ + __IO uint32_t DFLTDR; /*!< MDF Digital Filter Data Register, Address offset: 0xF0 */ +} MDF_Filter_TypeDef; + +/** + * @brief XSPI + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPI Control Register, Address offset: 0x000 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x004 */ + __IO uint32_t DCR1; /*!< XSPI Device Configuration Register 1, Address offset: 0x008 */ + __IO uint32_t DCR2; /*!< XSPI Device Configuration Register 2, Address offset: 0x00C */ + __IO uint32_t DCR3; /*!< XSPI Device Configuration Register 3, Address offset: 0x010 */ + __IO uint32_t DCR4; /*!< XSPI Device Configuration Register 4, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t SR; /*!< XSPI Status Register, Address offset: 0x020 */ + __IO uint32_t FCR; /*!< XSPI Flag Clear Register, Address offset: 0x024 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x028 - 0x03C */ + __IO uint32_t DLR; /*!< XSPI Data Length Register, Address offset: 0x040 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x044 */ + __IO uint32_t AR; /*!< XSPI Address Register, Address offset: 0x048 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x04C */ + __IO uint32_t DR; /*!< XSPI Data Register, Address offset: 0x050 */ + uint32_t RESERVED6[11]; /*!< Reserved, Address offset: 0x054 - 0x07C */ + __IO uint32_t PSMKR; /*!< XSPI Polling Status Mask Register, Address offset: 0x080 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x084 */ + __IO uint32_t PSMAR; /*!< XSPI Polling Status Match Register, Address offset: 0x088 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0x08C */ + __IO uint32_t PIR; /*!< XSPI Polling Interval Register, Address offset: 0x090 */ + uint32_t RESERVED9[27]; /*!< Reserved, Address offset: 0x094 - 0x0FC */ + __IO uint32_t CCR; /*!< XSPI Communication Configuration Register, Address offset: 0x100 */ + uint32_t RESERVED10; /*!< Reserved, Address offset: 0x104 */ + __IO uint32_t TCR; /*!< XSPI Timing Configuration Register, Address offset: 0x108 */ + uint32_t RESERVED11; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t IR; /*!< XSPI Instruction Register, Address offset: 0x110 */ + uint32_t RESERVED12[3]; /*!< Reserved, Address offset: 0x114 - 0x11C */ + __IO uint32_t ABR; /*!< XSPI Alternate Bytes Register, Address offset: 0x120 */ + uint32_t RESERVED13[3]; /*!< Reserved, Address offset: 0x124 - 0x12C */ + __IO uint32_t LPTR; /*!< XSPI Low-Power Timeout Register, Address offset: 0x130 */ + uint32_t RESERVED14[3]; /*!< Reserved, Address offset: 0x134 - 0x13C */ + __IO uint32_t WPCCR; /*!< XSPI Wrap Communication Configuration Register, Address offset: 0x140 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x144 */ + __IO uint32_t WPTCR; /*!< XSPI Wrap Timing Configuration Register, Address offset: 0x148 */ + uint32_t RESERVED16; /*!< Reserved, Address offset: 0x14C */ + __IO uint32_t WPIR; /*!< XSPI Wrap Instruction Register, Address offset: 0x150 */ + uint32_t RESERVED17[3]; /*!< Reserved, Address offset: 0x154 - 0x15C */ + __IO uint32_t WPABR; /*!< XSPI Wrap Alternate Bytes Register, Address offset: 0x160 */ + uint32_t RESERVED18[7]; /*!< Reserved, Address offset: 0x164 - 0x17C */ + __IO uint32_t WCCR; /*!< XSPI Write Communication Configuration Register, Address offset: 0x180 */ + uint32_t RESERVED19; /*!< Reserved, Address offset: 0x184 */ + __IO uint32_t WTCR; /*!< XSPI Write Timing Configuration Register, Address offset: 0x188 */ + uint32_t RESERVED20; /*!< Reserved, Address offset: 0x18C */ + __IO uint32_t WIR; /*!< XSPI Write Instruction Register, Address offset: 0x190 */ + uint32_t RESERVED21[3]; /*!< Reserved, Address offset: 0x194 - 0x19C */ + __IO uint32_t WABR; /*!< XSPI Write Alternate Bytes Register, Address offset: 0x1A0 */ + uint32_t RESERVED22[23]; /*!< Reserved, Address offset: 0x1A4 - 0x1FC */ + __IO uint32_t HLCR; /*!< XSPI HyperBus Latency Configuration Register, Address offset: 0x200 */ + uint32_t RESERVED23[3]; /*!< Reserved, Address offset: 0x204 - 0x20C */ + __IO uint32_t CALFCR; /*!< XSPI Full-Cycle Calibration Configuration Register, Address offset: 0x210 */ + uint32_t RESERVED24; /*!< Reserved, Address offset: 0x214 */ + __IO uint32_t CALMR; /*!< XSPI DLL Master Calibration Configuration Register, Address offset: 0x218 */ + uint32_t RESERVED25; /*!< Reserved, Address offset: 0x21C */ + __IO uint32_t CALSOR; /*!< XSPI Slave Output Calibration Configuration Register, Address offset: 0x220 */ + uint32_t RESERVED26; /*!< Reserved, Address offset: 0x224 */ + __IO uint32_t CALSIR; /*!< XSPI Slave Input Calibration Configuration Register, Address offset: 0x228 */ +} XSPI_TypeDef; + +/** + * @brief XSPI IO Manager + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPIM IO Manager Control Register, Address offset: 0x00 */ +} XSPIM_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x04 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control status register 2, Address offset: 0x0C */ + __IO uint32_t CSR3; /*!< PWR power control status register 3, Address offset: 0x10 */ + __IO uint32_t CSR4; /*!< PWR power control status register 4, Address offset: 0x14 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ + __IO uint32_t UCPDR; /*!< PWR USB Type-C and power delivery register, Address offset: 0x2C */ + __IO uint32_t APCR; /*!< PWR apply pull configuration register, Address offset: 0x30 */ + __IO uint32_t PUCRN; /*!< PWR port N pull-up control register, Address offset: 0x34 */ + __IO uint32_t PDCRN; /*!< PWR port N pull-down control register, Address offset: 0x38 */ + __IO uint32_t PUCRO; /*!< PWR port O pull-up control register, Address offset: 0x3C */ + __IO uint32_t PDCRO; /*!< PWR port O pull-down control register, Address offset: 0x40 */ + __IO uint32_t PDCRP; /*!< PWR port P pull-down control register, Address offset: 0x44 */ + uint32_t RESERVED2[2]; /*!< Reserved */ + __IO uint32_t PDR1; /*!< PWR debug register 1, Address offset: 0x50 */ +} PWR_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved, Address offset: 0x000C-0x03FC */ + __IO uint32_t RAM[1334]; /*!< PKA RAM Address offset: 0x0400-0x18D8 */ +} PKA_TypeDef; + +/** + * @brief PSSI + */ +typedef struct +{ + __IO uint32_t CR; /*!< PSSI control register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< PSSI status register, Address offset: 0x004 */ + __IO uint32_t RIS; /*!< PSSI raw interrupt status register, Address offset: 0x008 */ + __IO uint32_t IER; /*!< PSSI interrupt enable register, Address offset: 0x00C */ + __IO uint32_t MIS; /*!< PSSI masked interrupt status register, Address offset: 0x010 */ + __IO uint32_t ICR; /*!< PSSI interrupt clear register, Address offset: 0x014 */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x018 - 0x024 */ + __IO uint32_t DR; /*!< PSSI data register, Address offset: 0x028 */ +} PSSI_TypeDef; + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI clock calibration register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock recovery RC register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI clock calibration register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CDCFGR; /*!< RCC CPU domain configuration register, Address offset: 0x18 */ + __IO uint32_t BMCFGR; /*!< RCC Bus matrix configuration register, Address offset: 0x1C */ + __IO uint32_t APBCFGR; /*!< RCC APB clock configuration register, Address offset: 0x20 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs clock source selection register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs configuration register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR1; /*!< RCC PLL1 dividers configuration register 1, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 fractional divider configuration register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR1; /*!< RCC PLL2 dividers configuration register 1, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 fractional divider configuration register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR1; /*!< RCC PLL3 dividers configuration register 1, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 fractional divider configuration register, Address offset: 0x44 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t CCIPR1; /*!< RCC AHB peripherals kernel clock configuration register Address offset: 0x4C */ + __IO uint32_t CCIPR2; /*!< RCC APB1 peripherals kernel clock configuration register Address offset: 0x50 */ + __IO uint32_t CCIPR3; /*!< RCC APB2 peripherals kernel clock configuration register Address offset: 0x54 */ + __IO uint32_t CCIPR4; /*!< RCC APB4/APB5 peripherals kernel clock configuration register Address offset: 0x58 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x68 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB5RSTR; /*!< RCC AHB5 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB5RSTR; /*!< RCC APB5 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x90 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0xA0 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0xA4 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0xA8-0xAC */ + __IO uint32_t CKGDISR ; /*!< RCC AXI clocks gating disable register, Address offset: 0xB0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xB4-0xBC */ + __IO uint32_t PLL1DIVR2; /*!< RCC PLL1 dividers configuration register 2, Address offset: 0xC0 */ + __IO uint32_t PLL2DIVR2; /*!< RCC PLL2 dividers configuration register 2, Address offset: 0xC4 */ + __IO uint32_t PLL3DIVR2; /*!< RCC PLL3 dividers configuration register 2, Address offset: 0xC8 */ + __IO uint32_t PLL1SSCGR; /*!< RCC PLL1 spread spectrum clock generator register, Address offset: 0xCC */ + __IO uint32_t PLL2SSCGR; /*!< RCC PLL2 spread spectrum clock generator register, Address offset: 0xD0 */ + __IO uint32_t PLL3SSCGR; /*!< RCC PLL3 spread spectrum clock generator register, Address offset: 0xD4 */ + uint32_t RESERVED9[10]; /*!< Reserved, Address offset: 0xD8-0xFC */ + __IO uint32_t CKPROTR; /*!< RCC clock protection register, Address offset: 0x100 */ + uint32_t RESERVED10[11]; /*!< Reserved, Address offset: 0x104-0x12C */ + __IO uint32_t RSR; /*!< RCC reset status register, Address offset: 0x130 */ + __IO uint32_t AHB5ENR; /*!< RCC AHB5 peripheral clocks enable register, Address offset: 0x134 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x138 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x13C */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clocks enable register, Address offset: 0x140 */ + __IO uint32_t APB5ENR; /*!< RCC APB5 peripheral clocks enable register, Address offset: 0x144 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x148 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x14C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x150 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clocks enable register, Address offset: 0x154 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x158 */ + __IO uint32_t AHB5LPENR; /*!< RCC AHB5 peripheral sleep clocks enable register, Address offset: 0x15C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clocks enable register, Address offset: 0x160 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clocks enable register, Address offset: 0x164 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clocks enable register, Address offset: 0x168 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clocks enable register, Address offset: 0x16C */ + __IO uint32_t APB1LPENR1; /*!< RCC APB1 peripheral sleep clocks enable register 1, Address offset: 0x170 */ + __IO uint32_t APB1LPENR2; /*!< RCC APB1 peripheral sleep clocks enable register 2, Address offset: 0x174 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clocks enable register, Address offset: 0x178 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clocks enable register, Address offset: 0x17C */ + __IO uint32_t APB5LPENR; /*!< RCC APB5 peripheral sleep clocks enable register, Address offset: 0x180 */ +} RCC_TypeDef; + +/** + * @brief Random Number Generator + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ + uint32_t RESERVED; + __IO uint32_t HTCR; /*!< RNG health test configuration register, Address offset: 0x10 */ +} RNG_TypeDef; + +/* +* @brief RTC Specific device feature definitions +*/ +#define RTC_BKP_NB 32U +#define RTC_TAMP_NB 8U + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + __IO uint32_t PRIVCFGR; /*!< RTC privilege mode control register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x3C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC masked interrupt status register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC status Clear register, Address offset: 0x5C */ + uint32_t RESERVED3[4];/*!< Reserved, Address offset: 0x58 */ + __IO uint32_t ALRABINR; /*!< RTC alarm A binary mode register, Address offset: 0x70 */ + __IO uint32_t ALRBBINR; /*!< RTC alarm B binary mode register, Address offset: 0x74 */ +} RTC_TypeDef; + +/** + * @brief SAES Processor + */ +typedef struct +{ + __IO uint32_t CR; /*!< SAES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< SAES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< SAES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< SAES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< SAES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< SAES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< SAES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< SAES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< SAES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< SAES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< SAES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< SAES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< SAES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< SAES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< SAES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< SAES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< SAES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< SAES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< SAES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< SAES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< SAES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< SAES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< SAES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< SAES Suspend register 7, Address offset: 0x5C */ + uint32_t RESERVED1[168]; /*!< Reserved, Address offset: 0x60 -- 0x2FC */ + __IO uint32_t IER; /*!< SAES Interrupt Enable Register, Address offset: 0x300 */ + __IO uint32_t ISR; /*!< SAES Interrupt Status Register, Address offset: 0x304 */ + __IO uint32_t ICR; /*!< SAES Interrupt Clear Register, Address offset: 0x308 */ +} SAES_TypeDef; + +/** + * @brief Serial Audio Interface + */ +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED[16]; /*!< Reserved, Address offset: 0x04 to 0x40 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief System configuration, boot and security controller + */ +typedef struct +{ + __IO uint32_t BOOTSR; /*!< SBS Boot Status register, Address offset: 0x00 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x04-0x0C */ + __IO uint32_t HDPLCR; /*!< SBS Hide Protection Control register, Address offset: 0x10 */ + __IO uint32_t HDPLSR; /*!< SBS Hide Protection Status register, Address offset: 0x14 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t DBGCR; /*!< SBS Debug Control register, Address offset: 0x20 */ + __IO uint32_t DBGLOCKR; /*!< SBS Debug Lock register, Address offset: 0x24 */ + uint32_t RESERVED3[3]; /*!< Reserved, Address offset: 0x28-0x30 */ + __IO uint32_t RSSCMDR; /*!< SBS RSS Command register, Address offset: 0x34 */ + uint32_t RESERVED4[50]; /*!< Reserved, Address offset: 0x38-0xFC */ + __IO uint32_t PMCR; /*!< SBS Product Mode & Config register, Address offset: 0x100 */ + __IO uint32_t FPUIMR; /*!< SBS FPU Interrupt Mask register, Address offset: 0x104 */ + __IO uint32_t MESR; /*!< SBS Memory Erase Status register, Address offset: 0x108 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t CCCSR; /*!< SBS IO Compensation Cell Control and Status register, Address offset: 0x110 */ + __IO uint32_t CCVALR; /*!< SBS IO Compensation Cell Value register, Address offset: 0x114 */ + __IO uint32_t CCSWVALR; /*!< SBS IO Compensation Cell Software Value register, Address offset: 0x118 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x11C */ + __IO uint32_t BKLOCKR; /*!< SBS Break Lockup register, Address offset: 0x120 */ + uint32_t RESERVED7[3]; /*!< Reserved, Address offset: 0x124-0x12C */ + __IO uint32_t EXTICR[4]; /*!< SBS External Interrupt Configuration registers, Address offset: 0x130-0x13C */ +} SBS_TypeDef; + +/** + * @brief Secure Digital Card/IO Embedded MultiMediaCard Interface + */ +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC Power control register, Address offset : 0x000 */ + __IO uint32_t CLKCR; /*!< SDMMC Clock control register, Address offset : 0x004 */ + __IO uint32_t ARG; /*!< SDMMC Argument register, Address offset : 0x008 */ + __IO uint32_t CMD; /*!< SDMMC Command register, Address offset : 0x00C */ + __IO uint32_t RESPCMD; /*!< SDMMC Command response register, Address offset : 0x010 */ + __IO uint32_t RESP1; /*!< SDMMC Response 1 register, Address offset : 0x014 */ + __IO uint32_t RESP2; /*!< SDMMC Response 2 register, Address offset : 0x018 */ + __IO uint32_t RESP3; /*!< SDMMC Response 3 register, Address offset : 0x01C */ + __IO uint32_t RESP4; /*!< SDMMC Response 4 register, Address offset : 0x020 */ + __IO uint32_t DTIMER; /*!< SDMMC Data timer register, Address offset : 0x024 */ + __IO uint32_t DLEN; /*!< SDMMC Data length register, Address offset : 0x028 */ + __IO uint32_t DCTRL; /*!< SDMMC Data control register, Address offset : 0x02C */ + __IO uint32_t DCOUNT; /*!< SDMMC Data counter register, Address offset : 0x030 */ + __IO uint32_t STA; /*!< SDMMC Status register, Address offset : 0x034 */ + __IO uint32_t ICR; /*!< SDMMC Interrupt clear register, Address offset : 0x038 */ + __IO uint32_t MASK; /*!< SDMMC Mask register, Address offset : 0x03C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset : 0x040 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset : 0x044 - 0x04C */ + __IO uint32_t IDMACTRL; /*!< SDMMC IDMA control register, Address offset : 0x050 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC IDMA buffer size register, Address offset : 0x054 */ + __IO uint32_t IDMABASER; /*!< SDMMC IDMA buffer base address register, Address offset : 0x058 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset : 0x05C - 0x060 */ + __IO uint32_t IDMALAR; /*!< SDMMC IDMA linked list address register, Address offset : 0x064 */ + __IO uint32_t IDMABAR; /*!< SDMMC IDMA linked list memory base register, Address offset : 0x068 */ + uint32_t RESERVED2[5]; /*!< Reserved, Address offset : 0x06C - 0x07C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset : 0x080 */ +} SDMMC_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + +/** + * @brief SPI + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t TXDR; /*!< SPI Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ +} SPI_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< TAMP configuration register 3, Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< TAMP filter control register, Address offset: 0x0C */ + __IO uint32_t ATCR1; /*!< TAMP filter control register 1 Address offset: 0x10 */ + __IO uint32_t ATSEEDR; /*!< TAMP active tamper seed register, Address offset: 0x14 */ + __IO uint32_t ATOR; /*!< TAMP active tamper output register, Address offset: 0x18 */ + __IO uint32_t ATCR2; /*!< TAMP filter control register 2, Address offset: 0x1C */ + __IO uint32_t CFGR; /*!< TAMP configuration control register, Address offset: 0x20 */ + __IO uint32_t PRIVCFGR; /*!< TAMP privilege mode control register, Address offset: 0x24 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t IER; /*!< TAMP interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP masked interrupt status register, Address offset: 0x34 */ + __IO uint32_t RESERVED3; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP status clear register, Address offset: 0x3C */ + __IO uint32_t COUNT1R; /*!< TAMP monotonic counter 1 register, Address offset: 0x40 */ + uint32_t RESERVED4[4]; /*!< Reserved, Address offset: 0x43 -- 0x50 */ + __IO uint32_t RPCFGR; /*!< TAMP resources protection configuration register, Address offset: 0x54 */ + uint32_t RESERVED5[42]; /*!< Reserved, Address offset: 0x58 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ + __IO uint32_t BKP5R; /*!< TAMP backup register 5, Address offset: 0x114 */ + __IO uint32_t BKP6R; /*!< TAMP backup register 6, Address offset: 0x118 */ + __IO uint32_t BKP7R; /*!< TAMP backup register 7, Address offset: 0x11C */ + __IO uint32_t BKP8R; /*!< TAMP backup register 8, Address offset: 0x120 */ + __IO uint32_t BKP9R; /*!< TAMP backup register 9, Address offset: 0x124 */ + __IO uint32_t BKP10R; /*!< TAMP backup register 10, Address offset: 0x128 */ + __IO uint32_t BKP11R; /*!< TAMP backup register 11, Address offset: 0x12C */ + __IO uint32_t BKP12R; /*!< TAMP backup register 12, Address offset: 0x130 */ + __IO uint32_t BKP13R; /*!< TAMP backup register 13, Address offset: 0x134 */ + __IO uint32_t BKP14R; /*!< TAMP backup register 14, Address offset: 0x138 */ + __IO uint32_t BKP15R; /*!< TAMP backup register 15, Address offset: 0x13C */ + __IO uint32_t BKP16R; /*!< TAMP backup register 16, Address offset: 0x140 */ + __IO uint32_t BKP17R; /*!< TAMP backup register 17, Address offset: 0x144 */ + __IO uint32_t BKP18R; /*!< TAMP backup register 18, Address offset: 0x148 */ + __IO uint32_t BKP19R; /*!< TAMP backup register 19, Address offset: 0x14C */ + __IO uint32_t BKP20R; /*!< TAMP backup register 20, Address offset: 0x150 */ + __IO uint32_t BKP21R; /*!< TAMP backup register 21, Address offset: 0x154 */ + __IO uint32_t BKP22R; /*!< TAMP backup register 22, Address offset: 0x158 */ + __IO uint32_t BKP23R; /*!< TAMP backup register 23, Address offset: 0x15C */ + __IO uint32_t BKP24R; /*!< TAMP backup register 24, Address offset: 0x160 */ + __IO uint32_t BKP25R; /*!< TAMP backup register 25, Address offset: 0x164 */ + __IO uint32_t BKP26R; /*!< TAMP backup register 26, Address offset: 0x168 */ + __IO uint32_t BKP27R; /*!< TAMP backup register 27, Address offset: 0x16C */ + __IO uint32_t BKP28R; /*!< TAMP backup register 28, Address offset: 0x170 */ + __IO uint32_t BKP29R; /*!< TAMP backup register 29, Address offset: 0x174 */ + __IO uint32_t BKP30R; /*!< TAMP backup register 30, Address offset: 0x178 */ + __IO uint32_t BKP31R; /*!< TAMP backup register 31, Address offset: 0x17C */ +} TAMP_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register 5, Address offset: 0x48 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register 6, Address offset: 0x4C */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x50 */ + __IO uint32_t DTR2; /*!< TIM deadtime register 2, Address offset: 0x54 */ + __IO uint32_t ECR; /*!< TIM encoder control register, Address offset: 0x58 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + uint32_t RESERVED0[221]; /*!< Reserved, Address offset: 0x68 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x3DC */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x3E0 */ +} TIM_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t CFG3; /*!< UCPD configuration register 3, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ +} UCPD_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register, Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register, Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register, Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register, Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register, Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register, Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register, Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register, Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register, Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register, Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register, Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg, Address offset: 02Ch */ + __IO uint32_t Reserved30[2]; /*!< Reserved, Address offset: 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register, Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register, Address offset: 03Ch */ + __IO uint32_t GSNPSID; /*!< USB_OTG core ID, Address offset: 040h */ + __IO uint32_t GHWCFG1; /*!< User HW config1, Address offset: 044h */ + __IO uint32_t GHWCFG2; /*!< User HW config2, Address offset: 048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3, Address offset: 04Ch */ + __IO uint32_t Reserved6; /*!< Reserved, Address offset: 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register, Address offset: 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register, Address offset: 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register, Address offset: 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register, Address offset: 60Ch */ + __IO uint32_t Reserved43[39]; /*!< Reserved, Address offset: 058h */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg, Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 104h */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register, Address offset: 800h */ + __IO uint32_t DCTL; /*!< dev Control Register, Address offset: 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO), Address offset: 808h */ + uint32_t Reserved0C; /*!< Reserved, Address offset: 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask, Address offset: 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask, Address offset: 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg, Address offset: 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask, Address offset: 81Ch */ + uint32_t Reserved20; /*!< Reserved, Address offset: 820h */ + uint32_t Reserved9; /*!< Reserved, Address offset: 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register, Address offset: 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register, Address offset: 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold, Address offset: 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk, Address offset: 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt, Address offset: 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk, Address offset: 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask, Address offset: 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask, Address offset: 844h */ + uint32_t Reserved44[15]; /*!< Reserved, Address offset: 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk, Address offset: 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Register, Address offset: 900h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Register, Address offset: 900h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size Register, Address offset: 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Register, Address offset: 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Register, Address offset: 900h + (ep_num * 20h) + 18h */ + __IO uint32_t Reserved18; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Register, Address offset: B00h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Register, Address offset: B00h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size Register, Address offset: B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address Register, Address offset: B00h + (ep_num * 20h) + 14h */ + __IO uint32_t Reserved18[2]; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 18h */ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register, Address offset: 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register, Address offset: 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining, Address offset: 408h */ + uint32_t Reserved40C; /*!< Reserved, Address offset: 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status, Address offset: 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register, Address offset: 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask, Address offset: 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register, Address offset: 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register, Address offset: 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register, Address offset: 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register, Address offset: 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register, Address offset: 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register, Address offset: 514h */ + uint32_t Reserved[2]; /*!< Reserved, Address offset: 518h */ +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Window Watchdog + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/*@}*/ /* end of group STM32H7RSxx_peripherals */ + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + +/** @addtogroup STM32H7RSxx_Peripheral_peripheralAddr + * @{ + */ +#define ITCM_BASE 0x00000000UL /*!< ITCM base address */ +#define FLASH_BASE 0x08000000UL /*!< User Flash address */ +#define OTP_AREA_BASE 0x08FFF000UL /*!< OTP Area base address */ +#define ENGI_BYTES_BASE 0x52002800UL /*!< Engi Bytes */ +#define SYSTEM_FLASH_BASE 0x1FF00000UL /*!< System Flash base address */ +#define DTCM_BASE 0x20000000UL /*!< DTCM base address */ +#define SRAM1_AXI_BASE 0x24000000UL /*!< SRAM1 base address - accessible over AXI */ +#define SRAM2_AXI_BASE 0x24020000UL /*!< SRAM2 base address - accessible over AXI */ +#define SRAM3_AXI_BASE 0x24040000UL /*!< SRAM3 base address - accessible over AXI */ +#define SRAM4_AXI_BASE 0x24060000UL /*!< SRAM4 base address - accessible over AXI */ + +#define GFXMMU_VIRTUAL_BUFFER0_BASE 0x25000000UL /*!< GFXMMU virtual buffer 0 base address */ +#define GFXMMU_VIRTUAL_BUFFER1_BASE 0x25400000UL /*!< GFXMMU virtual buffer 1 base address */ +#define GFXMMU_VIRTUAL_BUFFER2_BASE 0x25800000UL /*!< GFXMMU virtual buffer 2 base address */ +#define GFXMMU_VIRTUAL_BUFFER3_BASE 0x25C00000UL /*!< GFXMMU virtual buffer 3 base address */ + +#define SRAM1_AHB_BASE 0x30000000UL /*!< SRAM1 base address */ +#define SRAM2_AHB_BASE 0x30004000UL /*!< SRAM2 base address */ +#define BKPSRAM_BASE 0x38800000UL /*!< Backup SRAM */ + +#define PERIPH_BASE 0x40000000UL /*!< AHB and APB Peripherals base address */ +#define XSPI2_BASE 0x70000000UL /*!< XSPI2 base address */ +#define XSPI1_BASE 0x90000000UL /*!< XSPI1 base address */ + +/*!< Internal memory size */ +#define ITCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define DTCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define FLASH_SIZE 0x00010000UL /*!< 64 KB */ +#define SRAM1_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase ITCM */ +#define SRAM2_AXI_SIZE 0x00020000UL /*!< 128 KB */ +#define SRAM3_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase DTCM */ +#define SRAM4_AXI_SIZE 0x00012000UL /*!< 72 KB default, can be decreased to 0 KB when RAM ECC is disable */ +#define SRAM_AHB_SIZE 0x00004000UL /*!< Both AHB SRAMs are 16 KB */ +#define BKPSRAM_SIZE 0x00001000UL /*!< 4 KB */ + +/*!< OTP Area size */ +#define OTP_SIZE 0x400U /* 1 KB */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x02000000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x08020000UL) +#define APB5PERIPH_BASE (PERIPH_BASE + 0x10000000UL) +#define AHB5PERIPH_BASE (PERIPH_BASE + 0x12000000UL) +#define APB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18020000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I3C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00UL) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x8400UL) +#define MDIOS_BASE (APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (APB1PERIPH_BASE + 0xA000UL) +#define FDCAN_CONFIG_BASE (APB1PERIPH_BASE + 0xA100UL) /*!< FDCAN configuration registers base address */ +#define FDCAN2_BASE (APB1PERIPH_BASE + 0xA400UL) +#define SRAMCAN_BASE (APB1PERIPH_BASE + 0xAC00UL) +#define UCPD1_BASE (APB1PERIPH_BASE + 0xEC00UL) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00UL) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) + +/*!< AHB1 peripherals */ +#define GPDMA1_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define GPDMA1_Channel0_BASE (GPDMA1_BASE + 0x0050UL) +#define GPDMA1_Channel1_BASE (GPDMA1_BASE + 0x00D0UL) +#define GPDMA1_Channel2_BASE (GPDMA1_BASE + 0x0150UL) +#define GPDMA1_Channel3_BASE (GPDMA1_BASE + 0x01D0UL) +#define GPDMA1_Channel4_BASE (GPDMA1_BASE + 0x0250UL) +#define GPDMA1_Channel5_BASE (GPDMA1_BASE + 0x02D0UL) +#define GPDMA1_Channel6_BASE (GPDMA1_BASE + 0x0350UL) +#define GPDMA1_Channel7_BASE (GPDMA1_BASE + 0x03D0UL) +#define GPDMA1_Channel8_BASE (GPDMA1_BASE + 0x0450UL) +#define GPDMA1_Channel9_BASE (GPDMA1_BASE + 0x04D0UL) +#define GPDMA1_Channel10_BASE (GPDMA1_BASE + 0x0550UL) +#define GPDMA1_Channel11_BASE (GPDMA1_BASE + 0x05D0UL) +#define GPDMA1_Channel12_BASE (GPDMA1_BASE + 0x0650UL) +#define GPDMA1_Channel13_BASE (GPDMA1_BASE + 0x06D0UL) +#define GPDMA1_Channel14_BASE (GPDMA1_BASE + 0x0750UL) +#define GPDMA1_Channel15_BASE (GPDMA1_BASE + 0x07D0UL) +#define ADC1_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (AHB1PERIPH_BASE + 0x2300UL) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) +#define ETH_MAC_BASE (ETH_BASE) +#define ADF1_BASE (AHB1PERIPH_BASE + 0xF000UL) +#define ADF1_Filter0_BASE (ADF1_BASE + 0x0080UL) +#define USB_OTG_HS_PERIPH_BASE (AHB1PERIPH_BASE + 0x20000UL) +#define USB_OTG_FS_PERIPH_BASE (AHB1PERIPH_BASE + 0x60000UL) + +/*!< AHB2 peripherals */ +#define PSSI_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define SDMMC2_BASE (AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (AHB2PERIPH_BASE + 0x2800UL) +#define CORDIC_BASE (AHB2PERIPH_BASE + 0x4400UL) + +/*!< AHB3 peripherals */ +#define RNG_BASE AHB3PERIPH_BASE +#define HASH_BASE (AHB3PERIPH_BASE + 0x0400UL) +#define HASH_DIGEST_BASE (AHB3PERIPH_BASE + 0x0710UL) +#define CRYP_BASE (AHB3PERIPH_BASE + 0x0800UL) +#define SAES_BASE (AHB3PERIPH_BASE + 0x1000UL) +#define PKA_BASE (AHB3PERIPH_BASE + 0x2000UL) + +/*!< APB5 peripherals */ +#define DCMIPP_BASE (APB5PERIPH_BASE + 0x2000UL) +#define GFXTIM_BASE (APB5PERIPH_BASE + 0x4000UL) + +/*!< AHB5 peripherals */ +#define HPDMA1_BASE AHB5PERIPH_BASE +#define HPDMA1_Channel0_BASE (HPDMA1_BASE + 0x0050UL) +#define HPDMA1_Channel1_BASE (HPDMA1_BASE + 0x00D0UL) +#define HPDMA1_Channel2_BASE (HPDMA1_BASE + 0x0150UL) +#define HPDMA1_Channel3_BASE (HPDMA1_BASE + 0x01D0UL) +#define HPDMA1_Channel4_BASE (HPDMA1_BASE + 0x0250UL) +#define HPDMA1_Channel5_BASE (HPDMA1_BASE + 0x02D0UL) +#define HPDMA1_Channel6_BASE (HPDMA1_BASE + 0x0350UL) +#define HPDMA1_Channel7_BASE (HPDMA1_BASE + 0x03D0UL) +#define HPDMA1_Channel8_BASE (HPDMA1_BASE + 0x0450UL) +#define HPDMA1_Channel9_BASE (HPDMA1_BASE + 0x04D0UL) +#define HPDMA1_Channel10_BASE (HPDMA1_BASE + 0x0550UL) +#define HPDMA1_Channel11_BASE (HPDMA1_BASE + 0x05D0UL) +#define HPDMA1_Channel12_BASE (HPDMA1_BASE + 0x0650UL) +#define HPDMA1_Channel13_BASE (HPDMA1_BASE + 0x06D0UL) +#define HPDMA1_Channel14_BASE (HPDMA1_BASE + 0x0750UL) +#define HPDMA1_Channel15_BASE (HPDMA1_BASE + 0x07D0UL) +#define DMA2D_BASE (AHB5PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB5PERIPH_BASE + 0x2000UL) +#define JPEG_BASE (AHB5PERIPH_BASE + 0x3000UL) +#define FMC_R_BASE (AHB5PERIPH_BASE + 0x4000UL) +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) +#define XSPI1_R_BASE (AHB5PERIPH_BASE + 0x5000UL) +#define DLYB_XSPI1_BASE (AHB5PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (AHB5PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (AHB5PERIPH_BASE + 0x8000UL) +#define RAMECC1_BASE (AHB5PERIPH_BASE + 0x9000UL) +#define RAMECC1_Monitor0_BASE (RAMECC1_BASE + 0x20UL) +#define RAMECC1_Monitor1_BASE (RAMECC1_BASE + 0x40UL) +#define RAMECC1_Monitor2_BASE (RAMECC1_BASE + 0x60UL) +#define RAMECC1_Monitor3_BASE (RAMECC1_BASE + 0x80UL) +#define RAMECC1_Monitor4_BASE (RAMECC1_BASE + 0xA0UL) +#define XSPI2_R_BASE (AHB5PERIPH_BASE + 0xA000UL) +#define DLYB_XSPI2_BASE (AHB5PERIPH_BASE + 0xB000UL) +#define XSPIM_BASE (AHB5PERIPH_BASE + 0xB400UL) +#define MCE1_BASE (AHB5PERIPH_BASE + 0xB800UL) +#define MCE1_REGION1_BASE (MCE1_BASE + 0x040UL) +#define MCE1_REGION2_BASE (MCE1_BASE + 0x050UL) +#define MCE1_REGION3_BASE (MCE1_BASE + 0x060UL) +#define MCE1_REGION4_BASE (MCE1_BASE + 0x070UL) +#define MCE1_CONTEXT1_BASE (MCE1_BASE + 0x240UL) +#define MCE1_CONTEXT2_BASE (MCE1_BASE + 0x270UL) +#define MCE2_BASE (AHB5PERIPH_BASE + 0xBC00UL) +#define MCE2_REGION1_BASE (MCE2_BASE + 0x040UL) +#define MCE2_REGION2_BASE (MCE2_BASE + 0x050UL) +#define MCE2_REGION3_BASE (MCE2_BASE + 0x060UL) +#define MCE2_REGION4_BASE (MCE2_BASE + 0x070UL) +#define MCE3_BASE (AHB5PERIPH_BASE + 0xC000UL) +#define MCE3_REGION1_BASE (MCE3_BASE + 0x040UL) +#define MCE3_REGION2_BASE (MCE3_BASE + 0x050UL) +#define MCE3_REGION3_BASE (MCE3_BASE + 0x060UL) +#define MCE3_REGION4_BASE (MCE3_BASE + 0x070UL) +#define GFXMMU_BASE (AHB5PERIPH_BASE + 0x010000UL) + +/*!< APB4 peripherals */ +#define EXTI_BASE APB4PERIPH_BASE +#define SBS_BASE (APB4PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (APB4PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (APB4PERIPH_BASE + 0x1400UL) +#define LPTIM2_BASE (APB4PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (APB4PERIPH_BASE + 0x2800UL) +#define LPTIM4_BASE (APB4PERIPH_BASE + 0x2C00UL) +#define LPTIM5_BASE (APB4PERIPH_BASE + 0x3000UL) +#define VREFBUF_BASE (APB4PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (APB4PERIPH_BASE + 0x4000UL) +#define TAMP_BASE (APB4PERIPH_BASE + 0x4400UL) +#define IWDG_BASE (APB4PERIPH_BASE + 0x4800UL) +#define DTS_BASE (APB4PERIPH_BASE + 0x6800UL) + +/*!< AHB4 peripherals */ +#define GPIOA_BASE AHB4PERIPH_BASE +#define GPIOB_BASE (AHB4PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB4PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB4PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB4PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (AHB4PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (AHB4PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (AHB4PERIPH_BASE + 0x1C00UL) +#define GPIOM_BASE (AHB4PERIPH_BASE + 0x3000UL) +#define GPION_BASE (AHB4PERIPH_BASE + 0x3400UL) +#define GPIOO_BASE (AHB4PERIPH_BASE + 0x3800UL) +#define GPIOP_BASE (AHB4PERIPH_BASE + 0x3C00UL) +#define RCC_BASE (AHB4PERIPH_BASE + 0x4400UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x4800UL) +#define CRC_BASE (AHB4PERIPH_BASE + 0x4C00UL) +#define RAMECC2_BASE (AHB4PERIPH_BASE + 0x7000UL) +#define RAMECC2_Monitor1_BASE (RAMECC2_BASE + 0x40UL) + +/*!< Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +/*!< AXIM registers base address */ +#define AXIM_BASE (0xBFF00000UL) +#define AXIM_ASIB1_BASE (AXIM_BASE + 0x42000UL) +#define AXIM_ASIB2_BASE (AXIM_BASE + 0x43000UL) +#define AXIM_ASIB3_BASE (AXIM_BASE + 0x44000UL) +#define AXIM_ASIB4_BASE (AXIM_BASE + 0x45000UL) +#define AXIM_ASIB5_BASE (AXIM_BASE + 0x46000UL) +#define AXIM_ASIB6_BASE (AXIM_BASE + 0x47000UL) +#define AXIM_ASIB7_BASE (AXIM_BASE + 0x48000UL) +#define AXIM_ASIB8_BASE (AXIM_BASE + 0x49000UL) +#define AXIM_ASIB9_BASE (AXIM_BASE + 0x4A000UL) +#define AXIM_ASIB10_BASE (AXIM_BASE + 0x4B000UL) +#define AXIM_ASIB11_BASE (AXIM_BASE + 0x4C000UL) +#define AXIM_AMIB1_BASE (AXIM_BASE + 0x02000UL) +#define AXIM_AMIB2_BASE (AXIM_BASE + 0x03000UL) +#define AXIM_AMIB3_BASE (AXIM_BASE + 0x04000UL) +#define AXIM_AMIB4_BASE (AXIM_BASE + 0x05000UL) +#define AXIM_AMIB5_BASE (AXIM_BASE + 0x06000UL) +#define AXIM_AMIB6_BASE (AXIM_BASE + 0x07000UL) +#define AXIM_AMIB7_BASE (AXIM_BASE + 0x08000UL) +#define AXIM_AMIB8_BASE (AXIM_BASE + 0x09000UL) +#define AXIM_AMIB9_BASE (AXIM_BASE + 0x0A000UL) +#define AXIM_AMIB10_BASE (AXIM_BASE + 0x0B000UL) + +/*!< Unique device ID register base address */ +#define UID_BASE (0x08FFF800UL) + +/*!< Flash size data register base address */ +#define FLASHSIZE_BASE (0x08FFF80CUL) + +/*!< Package data register base address */ +#define PACKAGE_BASE (0x08FFF80CUL) + +/* USB OTG registers base addresses */ +#define USB_OTG_GLOBAL_BASE (0x0000UL) +#define USB_OTG_DEVICE_BASE (0x0800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x0900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0x0B00UL) +#define USB_OTG_EP_REG_SIZE (0x0020UL) +#define USB_OTG_HOST_BASE (0x0400UL) +#define USB_OTG_HOST_PORT_BASE (0x0440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x0500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x0020UL) +#define USB_OTG_PCGCCTL_BASE (0x0E00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< Root Secure Service Library */ +/************ RSSLIB system Flash region definition constants *************/ +#define RSSLIB_SYS_FLASH_PFUNC_START (0x1FF1FD4CUL) +#define RSSLIB_SYS_FLASH_PFUNC_END (0x1FF1FD78UL) + +/************ RSSLIB function return constants ********************************/ +#define RSSLIB_ERROR (0xF5F5F5F5UL) +#define RSSLIB_SUCCESS (0xEAEAEAEAUL) + +/*!< RSSLIB pointer function structure address definition */ +#define RSSLIB_PFUNC_BASE (0x1FF1FD4CUL) +#define RSSLIB_PFUNC ((RSSLIB_pFunc_TypeDef *)RSSLIB_PFUNC_BASE) + +/** + * @brief Prototype of RSSLIB Jump to HDP level2 Function + * @detail This function increments HDP level up to HDP level 2 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl2_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Prototype of RSSLIB Jump to HDP level3 Function + * @detail This function increments HDP level up to HDP level 3 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl3_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Input parameter definition of RSSLIB_DataProvisioning + */ +typedef struct +{ + uint32_t *pSource; /*!< Address of the Data to be provisioned, shall be in SRAM3 */ + uint32_t Destination; /*!< OBKeys destination information where to provision Data */ + uint32_t Size; /*!< Size in bytes of the Data to be provisioned*/ + uint32_t DoEncryption; /*!< Notifies RSSLIB_DataProvisioning to encrypt or not Data*/ + uint32_t Crc; /*!< CRC over full Data buffer and previous field in the structure*/ +} RSSLIB_DataProvisioningConf_t; + +/** + * @brief Prototype of RSSLIB Data Provisioning Function + * @detail This function write Data within OBKeys sections. + * @param pointer on the structure defining Data to be provisioned and where to + * provision them within OBKeys sections. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_DataProvisioning_TypeDef)(RSSLIB_DataProvisioningConf_t *pConfig); + +/** + * @brief Prototype of RSSLIB Set Secure OB Function + * @detail This function configure a secure OB. + * @param OB address among following values: + * &(FLASH->WRPSRP), &(FLASH->HDPSRP) or &(FLASH->ROTSRP) + * @param OB mask (example 0x000000FF for updating WRP OB). + * @param OB value + * @param OB Pos: bit position of OB value. + * ObValue << ObPos must be aligned on ObMask. + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetSecOB_TypeDef)(uint32_t ObAddr, uint32_t ObMask, uint32_t ObValue, uint32_t ObPos); + +/** + * @brief Prototype of RSSLIB Get RSS Status Function + * @detail This function return RSS Status. + * Calling GetRssStatus is only relevant after calling + * SetSecOB or DataProvisioning. + * @param none. + * @retval RSSLIB_SUCCESS on success, otherwise return an error 0xF5F5xxxx. + */ +typedef uint32_t (*RSSLIB_GetRssStatus_TypeDef)(void); + +/** + * @brief Prototype of RSSLIB Set Product State Function + * @detail This function change Product State. + * @param Requested Product State among following values: + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetProductState_TypeDef)(uint32_t ProductState); + +/** + * @brief Prototype of RSSLIB Get Product State Function + * @detail This function return current Product State. + * @param none. + * @retval RSSLIB_RSS_ERROR on error, + * otherwise return product state among following values: + * 0x39 : Open + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + */ +typedef uint32_t (*RSSLIB_GetProductState_TypeDef)(void); + + +/** + * @brief RSSLib callable function pointer structure + */ +typedef struct +{ + __IM RSSLIB_SetSecOB_TypeDef SetSecOB; + uint32_t RESERVED1[4]; + __IM RSSLIB_GetRssStatus_TypeDef GetRssStatus; + __IM RSSLIB_SetProductState_TypeDef SetProductState; + __IM RSSLIB_DataProvisioning_TypeDef DataProvisioning; + __IM RSSLIB_JumpHDPlvl2_TypeDef JumpHDPLvl2; + __IM RSSLIB_JumpHDPlvl3_TypeDef JumpHDPLvl3; + __IM RSSLIB_GetProductState_TypeDef GetProductState; +} RSSLIB_pFunc_TypeDef; + + +/** @} */ /* End of group STM32H7RSxx_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_Peripheral_declaration + * @{ + */ + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) +#define ADF1 ((MDF_TypeDef *) ADF1_BASE) +#define ADF1_Filter0 ((MDF_Filter_TypeDef *) ADF1_Filter0_BASE) +#define AXIM_AMIB_1 ((AXIM_AMIB_TypeDef *) AXIM_AMIB1_BASE ) +#define AXIM_AMIB_2 ((AXIM_AMIB_TypeDef *) AXIM_AMIB2_BASE ) +#define AXIM_AMIB_3 ((AXIM_AMIB_TypeDef *) AXIM_AMIB3_BASE ) +#define AXIM_AMIB_4 ((AXIM_AMIB_TypeDef *) AXIM_AMIB4_BASE ) +#define AXIM_AMIB_5 ((AXIM_AMIB_TypeDef *) AXIM_AMIB5_BASE ) +#define AXIM_AMIB_6 ((AXIM_AMIB_TypeDef *) AXIM_AMIB6_BASE ) +#define AXIM_AMIB_7 ((AXIM_AMIB_TypeDef *) AXIM_AMIB7_BASE ) +#define AXIM_AMIB_8 ((AXIM_AMIB_TypeDef *) AXIM_AMIB8_BASE ) +#define AXIM_AMIB_9 ((AXIM_AMIB_TypeDef *) AXIM_AMIB9_BASE ) +#define AXIM_AMIB_10 ((AXIM_AMIB_TypeDef *) AXIM_AMIB10_BASE) +#define AXIM_ASIB_1 ((AXIM_ASIB_TypeDef *) AXIM_ASIB1_BASE ) +#define AXIM_ASIB_2 ((AXIM_ASIB_TypeDef *) AXIM_ASIB2_BASE ) +#define AXIM_ASIB_3 ((AXIM_ASIB_TypeDef *) AXIM_ASIB3_BASE ) +#define AXIM_ASIB_4 ((AXIM_ASIB_TypeDef *) AXIM_ASIB4_BASE ) +#define AXIM_ASIB_5 ((AXIM_ASIB_TypeDef *) AXIM_ASIB5_BASE ) +#define AXIM_ASIB_6 ((AXIM_ASIB_TypeDef *) AXIM_ASIB6_BASE ) +#define AXIM_ASIB_7 ((AXIM_ASIB_TypeDef *) AXIM_ASIB7_BASE ) +#define AXIM_ASIB_8 ((AXIM_ASIB_TypeDef *) AXIM_ASIB8_BASE ) +#define AXIM_ASIB_9 ((AXIM_ASIB_TypeDef *) AXIM_ASIB9_BASE ) +#define AXIM_ASIB_10 ((AXIM_ASIB_TypeDef *) AXIM_ASIB10_BASE) +#define AXIM_ASIB_11 ((AXIM_ASIB_TypeDef *) AXIM_ASIB11_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define CORDIC ((CORDIC_TypeDef *) CORDIC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define CRYP ((CRYP_TypeDef *) CRYP_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define DCMIPP ((DCMIPP_TypeDef *) DCMIPP_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) +#define DLYB_XSPI1 ((DLYB_TypeDef *) DLYB_XSPI1_BASE) +#define DLYB_XSPI2 ((DLYB_TypeDef *) DLYB_XSPI2_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DTS ((DTS_TypeDef *) DTS_BASE) +#define ETH ((ETH_TypeDef *)ETH_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CONFIG ((FDCAN_Config_TypeDef *) FDCAN_CONFIG_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define GFXTIM ((GFXTIM_TypeDef *) GFXTIM_BASE) +#define GFXMMU ((GFXMMU_TypeDef *) GFXMMU_BASE) +#define GPDMA1 ((DMA_TypeDef *) GPDMA1_BASE) +#define GPDMA1_Channel0 ((DMA_Channel_TypeDef *) GPDMA1_Channel0_BASE) +#define GPDMA1_Channel1 ((DMA_Channel_TypeDef *) GPDMA1_Channel1_BASE) +#define GPDMA1_Channel2 ((DMA_Channel_TypeDef *) GPDMA1_Channel2_BASE) +#define GPDMA1_Channel3 ((DMA_Channel_TypeDef *) GPDMA1_Channel3_BASE) +#define GPDMA1_Channel4 ((DMA_Channel_TypeDef *) GPDMA1_Channel4_BASE) +#define GPDMA1_Channel5 ((DMA_Channel_TypeDef *) GPDMA1_Channel5_BASE) +#define GPDMA1_Channel6 ((DMA_Channel_TypeDef *) GPDMA1_Channel6_BASE) +#define GPDMA1_Channel7 ((DMA_Channel_TypeDef *) GPDMA1_Channel7_BASE) +#define GPDMA1_Channel8 ((DMA_Channel_TypeDef *) GPDMA1_Channel8_BASE) +#define GPDMA1_Channel9 ((DMA_Channel_TypeDef *) GPDMA1_Channel9_BASE) +#define GPDMA1_Channel10 ((DMA_Channel_TypeDef *) GPDMA1_Channel10_BASE) +#define GPDMA1_Channel11 ((DMA_Channel_TypeDef *) GPDMA1_Channel11_BASE) +#define GPDMA1_Channel12 ((DMA_Channel_TypeDef *) GPDMA1_Channel12_BASE) +#define GPDMA1_Channel13 ((DMA_Channel_TypeDef *) GPDMA1_Channel13_BASE) +#define GPDMA1_Channel14 ((DMA_Channel_TypeDef *) GPDMA1_Channel14_BASE) +#define GPDMA1_Channel15 ((DMA_Channel_TypeDef *) GPDMA1_Channel15_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) +#define GPION ((GPIO_TypeDef *) GPION_BASE) +#define GPIOO ((GPIO_TypeDef *) GPIOO_BASE) +#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define HPDMA1 ((DMA_TypeDef *) HPDMA1_BASE) +#define HPDMA1_Channel0 ((DMA_Channel_TypeDef *) HPDMA1_Channel0_BASE) +#define HPDMA1_Channel1 ((DMA_Channel_TypeDef *) HPDMA1_Channel1_BASE) +#define HPDMA1_Channel2 ((DMA_Channel_TypeDef *) HPDMA1_Channel2_BASE) +#define HPDMA1_Channel3 ((DMA_Channel_TypeDef *) HPDMA1_Channel3_BASE) +#define HPDMA1_Channel4 ((DMA_Channel_TypeDef *) HPDMA1_Channel4_BASE) +#define HPDMA1_Channel5 ((DMA_Channel_TypeDef *) HPDMA1_Channel5_BASE) +#define HPDMA1_Channel6 ((DMA_Channel_TypeDef *) HPDMA1_Channel6_BASE) +#define HPDMA1_Channel7 ((DMA_Channel_TypeDef *) HPDMA1_Channel7_BASE) +#define HPDMA1_Channel8 ((DMA_Channel_TypeDef *) HPDMA1_Channel8_BASE) +#define HPDMA1_Channel9 ((DMA_Channel_TypeDef *) HPDMA1_Channel9_BASE) +#define HPDMA1_Channel10 ((DMA_Channel_TypeDef *) HPDMA1_Channel10_BASE) +#define HPDMA1_Channel11 ((DMA_Channel_TypeDef *) HPDMA1_Channel11_BASE) +#define HPDMA1_Channel12 ((DMA_Channel_TypeDef *) HPDMA1_Channel12_BASE) +#define HPDMA1_Channel13 ((DMA_Channel_TypeDef *) HPDMA1_Channel13_BASE) +#define HPDMA1_Channel14 ((DMA_Channel_TypeDef *) HPDMA1_Channel14_BASE) +#define HPDMA1_Channel15 ((DMA_Channel_TypeDef *) HPDMA1_Channel15_BASE) +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I3C1 ((I3C_TypeDef *) I3C1_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define LPTIM4 ((LPTIM_TypeDef *) LPTIM4_BASE) +#define LPTIM5 ((LPTIM_TypeDef *) LPTIM5_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define MCE1 ((MCE_TypeDef *) MCE1_BASE) +#define MCE1_REGION1 ((MCE_Region_TypeDef *) MCE1_REGION1_BASE) +#define MCE1_REGION2 ((MCE_Region_TypeDef *) MCE1_REGION2_BASE) +#define MCE1_REGION3 ((MCE_Region_TypeDef *) MCE1_REGION3_BASE) +#define MCE1_REGION4 ((MCE_Region_TypeDef *) MCE1_REGION4_BASE) +#define MCE1_CONTEXT1 ((MCE_Context_TypeDef *) MCE1_CONTEXT1_BASE) +#define MCE1_CONTEXT2 ((MCE_Context_TypeDef *) MCE1_CONTEXT2_BASE) +#define MCE2 ((MCE_TypeDef *) MCE2_BASE) +#define MCE2_REGION1 ((MCE_Region_TypeDef *) MCE2_REGION1_BASE) +#define MCE2_REGION2 ((MCE_Region_TypeDef *) MCE2_REGION2_BASE) +#define MCE2_REGION3 ((MCE_Region_TypeDef *) MCE2_REGION3_BASE) +#define MCE2_REGION4 ((MCE_Region_TypeDef *) MCE2_REGION4_BASE) +#define MCE3 ((MCE_TypeDef *) MCE3_BASE) +#define MCE3_REGION1 ((MCE_Region_TypeDef *) MCE3_REGION1_BASE) +#define MCE3_REGION2 ((MCE_Region_TypeDef *) MCE3_REGION2_BASE) +#define MCE3_REGION3 ((MCE_Region_TypeDef *) MCE3_REGION3_BASE) +#define MCE3_REGION4 ((MCE_Region_TypeDef *) MCE3_REGION4_BASE) +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define PSSI ((PSSI_TypeDef *) PSSI_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RAMECC1 ((RAMECC_TypeDef *)RAMECC1_BASE) +#define RAMECC2 ((RAMECC_TypeDef *)RAMECC2_BASE) +#define RAMECC1_Monitor0 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor0_BASE) +#define RAMECC1_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor1_BASE) +#define RAMECC1_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor2_BASE) +#define RAMECC1_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor3_BASE) +#define RAMECC1_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor4_BASE) +#define RAMECC2_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor1_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define SAES ((SAES_TypeDef *) SAES_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *) SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *) SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *) SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *) SAI2_Block_B_BASE) +#define SBS ((SBS_TypeDef *) SBS_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define XSPI1 ((XSPI_TypeDef *) XSPI1_R_BASE) +#define XSPI2 ((XSPI_TypeDef *) XSPI2_R_BASE) +#define XSPIM ((XSPIM_TypeDef *) XSPIM_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) + +/** @} */ /* End of group STM32H7RSxx_Peripheral_declaration */ + +/** @addtogroup STM32H7RSxx_Peripheral_Exported_constants + * @{ + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Registers_Bits_Definition + * @{ + */ +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G4 series) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_ADFCFG_Pos (2U) +#define ADC_CFGR_ADFCFG_Msk (0x1UL << ADC_CFGR_ADFCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_ADFCFG ADC_CFGR_ADFCFG_Msk /*!< ADC ADF transfer configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR_ALIGN_Pos (15U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00008000 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +#define ADC_CFGR2_SWTRIG_Pos (25U) +#define ADC_CFGR2_SWTRIG_Msk (0x1UL << ADC_CFGR2_SWTRIG_Pos) /*!< 0x02000000 */ +#define ADC_CFGR2_SWTRIG ADC_CFGR2_SWTRIG_Msk /*!< ADC Software Trigger Bit for Sample time control trigger mode */ +#define ADC_CFGR2_BULB_Pos (26U) +#define ADC_CFGR2_BULB_Msk (0x1UL << ADC_CFGR2_BULB_Pos) /*!< 0x04000000 */ +#define ADC_CFGR2_BULB ADC_CFGR2_BULB_Msk /*!< ADC Bulb sampling mode */ +#define ADC_CFGR2_SMPTRIG_Pos (27U) +#define ADC_CFGR2_SMPTRIG_Msk (0x1UL << ADC_CFGR2_SMPTRIG_Pos) /*!< 0x08000000 */ +#define ADC_CFGR2_SMPTRIG ADC_CFGR2_SMPTRIG_Msk /*!< ADC Sample Time Control Trigger mode */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ + +#define ADC_TR1_AWDFILT_Pos (12U) +#define ADC_TR1_AWDFILT_Msk (0x7UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00007000 */ +#define ADC_TR1_AWDFILT ADC_TR1_AWDFILT_Msk /*!< ADC analog watchdog filtering parameter */ +#define ADC_TR1_AWDFILT_0 (0x1UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00001000 */ +#define ADC_TR1_AWDFILT_1 (0x2UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00002000 */ +#define ADC_TR1_AWDFILT_2 (0x4UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00004000 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL<< ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ + +#define ADC_OFR1_OFFSETPOS_Pos (24U) +#define ADC_OFR1_OFFSETPOS_Msk (0x1UL << ADC_OFR1_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSETPOS ADC_OFR1_OFFSETPOS_Msk /*!< ADC offset number 1 positive */ +#define ADC_OFR1_SATEN_Pos (25U) +#define ADC_OFR1_SATEN_Msk (0x1UL << ADC_OFR1_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR1_SATEN ADC_OFR1_SATEN_Msk /*!< ADC offset number 1 saturation enable */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ + +#define ADC_OFR2_OFFSETPOS_Pos (24U) +#define ADC_OFR2_OFFSETPOS_Msk (0x1UL << ADC_OFR2_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSETPOS ADC_OFR2_OFFSETPOS_Msk /*!< ADC offset number 2 positive */ +#define ADC_OFR2_SATEN_Pos (25U) +#define ADC_OFR2_SATEN_Msk (0x1UL << ADC_OFR2_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR2_SATEN ADC_OFR2_SATEN_Msk /*!< ADC offset number 2 saturation enable */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ + +#define ADC_OFR3_OFFSETPOS_Pos (24U) +#define ADC_OFR3_OFFSETPOS_Msk (0x1UL << ADC_OFR3_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSETPOS ADC_OFR3_OFFSETPOS_Msk /*!< ADC offset number 3 positive */ +#define ADC_OFR3_SATEN_Pos (25U) +#define ADC_OFR3_SATEN_Msk (0x1UL << ADC_OFR3_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR3_SATEN ADC_OFR3_SATEN_Msk /*!< ADC offset number 3 saturation enable */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ + +#define ADC_OFR4_OFFSETPOS_Pos (24U) +#define ADC_OFR4_OFFSETPOS_Msk (0x1UL << ADC_OFR4_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSETPOS ADC_OFR4_OFFSETPOS_Msk /*!< ADC offset number 4 positive */ +#define ADC_OFR4_SATEN_Pos (25U) +#define ADC_OFR4_SATEN_Msk (0x1UL << ADC_OFR4_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR4_SATEN ADC_OFR4_SATEN_Msk /*!< ADC offset number 4 saturation enable */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000030 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00300000 */ + +/******************** Bit definition for ADC_OR register ***************/ +#define ADC_OR_OP0_Pos (0U) +#define ADC_OR_OP0_Msk (0x1UL << ADC_OR_OP0_Pos) /*!< 0x00000001 */ +#define ADC_OR_OP0 ADC_OR_OP0_Msk /*!< ADC internal path to VDDCORE */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register *******************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ + +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ + +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************************************************************************/ +/* */ +/* AXIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AXIM_ASIB_FNMOD2 register **********/ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_ASIB_READQOS register ********/ +#define AXIM_ASIB_READQOS_AR_QOS_Pos (0U) +#define AXIM_ASIB_READQOS_AR_QOS_Msk (0xFUL << AXIM_ASIB_READQOS_AR_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_READQOS_AR_QOS AXIM_ASIB_READQOS_AR_QOS_Msk /*!< Read channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_WRITEQOS register *******/ +#define AXIM_ASIB_WRITEQOS_AW_QOS_Pos (0U) +#define AXIM_ASIB_WRITEQOS_AW_QOS_Msk (0xFUL << AXIM_ASIB_WRITEQOS_AW_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_WRITEQOS_AW_QOS AXIM_ASIB_WRITEQOS_AW_QOS_Msk /*!< Write channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_FNMOD register **********/ +#define AXIM_ASIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_ASIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD_READ_ISS AXIM_ASIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_ASIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS AXIM_ASIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMODBMISS register **********/ +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODBMISS_READ_ISS AXIM_AMIB_FNMODBMISS_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMOD2 register **********/ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_AMIB_FNMODLB register **********/ +#define AXIM_AMIB_FNMODLB_LONG_BURST_Pos (0U) +#define AXIM_AMIB_FNMODLB_LONG_BURST_Msk (0x1UL << AXIM_AMIB_FNMODLB_LONG_BURST_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODLB_LONG_BURST AXIM_AMIB_FNMODLB_LONG_BURST_Msk /*!< Long bursts can be generated */ + +/******************* Bit definition for AXIM_AMIB_FNMOD register **********/ +#define AXIM_AMIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD_READ_ISS AXIM_AMIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS AXIM_AMIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE ((0x16C8UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT ((0x14B8UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process protected exponentiation*/ +#define PKA_MODULAR_EXP_PROTECT_IN_MODULUS ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus to process protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_PHI ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input phi to process protected exponentiation */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_ERROR ((0x1298UL - PKA_RAM_OFFSET)>>2) /*!< Output error of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input curve prime order n number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input prime order n */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_POINT_CHECK_IN_MONTGOMERY_PARAM ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0x0FE8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0x0F28UL - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0x0FE0UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x1400UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1458UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x0468UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x04D0UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x0678UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x06D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0x12F8UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0x1350UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x10E0UL - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0x13A8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x0948UL - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x0B60UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xE78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic subtraction input data */ +#define PKA_ARITHMETIC_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic subtraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular subtraction input data */ +#define PKA_MODULAR_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular subtraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result for arithmetic operations */ + +/* Compute ECC complete addition input data */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC complete addition output data */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Output result Z coordinate */ + +/* Compute ECC double base ladder input data */ +#define PKA_ECC_DOUBLE_LADDER_IN_PRIME_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input 'm' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC double base ladder output data */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_ERROR ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Compute ECC projective to affine conversion input data */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P X coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Y coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Z coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2 ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Compute ECC projective to affine conversion output data */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result x affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result y affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + + +/******************************************************************************/ +/* */ +/* Parallel Synchronous Slave Interface (PSSI ) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PSSI_CR register *******************/ +#define PSSI_CR_CKPOL_Pos (5U) +#define PSSI_CR_CKPOL_Msk (0x1UL << PSSI_CR_CKPOL_Pos) /*!< 0x00000020 */ +#define PSSI_CR_CKPOL PSSI_CR_CKPOL_Msk /*!< Parallel data clock polarity */ +#define PSSI_CR_DEPOL_Pos (6U) +#define PSSI_CR_DEPOL_Msk (0x1UL << PSSI_CR_DEPOL_Pos) /*!< 0x00000040 */ +#define PSSI_CR_DEPOL PSSI_CR_DEPOL_Msk /*!< Data enable polarity */ +#define PSSI_CR_RDYPOL_Pos (8U) +#define PSSI_CR_RDYPOL_Msk (0x1UL << PSSI_CR_RDYPOL_Pos) /*!< 0x00000100 */ +#define PSSI_CR_RDYPOL PSSI_CR_RDYPOL_Msk /*!< Ready polarity */ +#define PSSI_CR_EDM_Pos (10U) +#define PSSI_CR_EDM_Msk (0x3UL << PSSI_CR_EDM_Pos) /*!< 0x00000C00 */ +#define PSSI_CR_EDM PSSI_CR_EDM_Msk /*!< Extended data mode */ +#define PSSI_CR_ENABLE_Pos (14U) +#define PSSI_CR_ENABLE_Msk (0x1UL << PSSI_CR_ENABLE_Pos) /*!< 0x00004000 */ +#define PSSI_CR_ENABLE PSSI_CR_ENABLE_Msk /*!< PSSI enable */ +#define PSSI_CR_DERDYCFG_Pos (18U) +#define PSSI_CR_DERDYCFG_Msk (0x7UL << PSSI_CR_DERDYCFG_Pos) /*!< 0x001C0000 */ +#define PSSI_CR_DERDYCFG PSSI_CR_DERDYCFG_Msk /*!< Data enable and ready configuration */ +#define PSSI_CR_CKSRC_Pos (29U) +#define PSSI_CR_CKSRC_Msk (0x1UL << PSSI_CR_CKSRC_Pos) /*!< 0x20000000 */ +#define PSSI_CR_CKSRC PSSI_CR_CKSRC_Msk /*!< Clock source */ +#define PSSI_CR_DMAEN_Pos (30U) +#define PSSI_CR_DMAEN_Msk (0x1UL << PSSI_CR_DMAEN_Pos) /*!< 0x40000000 */ +#define PSSI_CR_DMAEN PSSI_CR_DMAEN_Msk /*!< DMA enable */ +#define PSSI_CR_OUTEN_Pos (31U) +#define PSSI_CR_OUTEN_Msk (0x1UL << PSSI_CR_OUTEN_Pos) /*!< 0x80000000 */ +#define PSSI_CR_OUTEN PSSI_CR_OUTEN_Msk /*!< Data direction selection */ + +/******************** Bit definition for PSSI_SR register *******************/ +#define PSSI_SR_RTT4B_Pos (2U) +#define PSSI_SR_RTT4B_Msk (0x1UL << PSSI_SR_RTT4B_Pos) /*!< 0x00000004 */ +#define PSSI_SR_RTT4B PSSI_SR_RTT4B_Msk /*!< Ready to transfer four bytes */ +#define PSSI_SR_RTT1B_Pos (3U) +#define PSSI_SR_RTT1B_Msk (0x1UL << PSSI_SR_RTT1B_Pos) /*!< 0x00000008 */ +#define PSSI_SR_RTT1B PSSI_SR_RTT1B_Msk /*!< Ready to transfer one byte */ + +/******************** Bit definition for PSSI_RIS register ******************/ +#define PSSI_RIS_OVR_RIS_Pos (1U) +#define PSSI_RIS_OVR_RIS_Msk (0x1UL << PSSI_RIS_OVR_RIS_Pos) /*!< 0x00000002 */ +#define PSSI_RIS_OVR_RIS PSSI_RIS_OVR_RIS_Msk /*!< Data buffer overrun/underrun raw interrupt status */ + +/******************** Bit definition for PSSI_IER register ******************/ +#define PSSI_IER_OVR_IE_Pos (1U) +#define PSSI_IER_OVR_IE_Msk (0x1UL << PSSI_IER_OVR_IE_Pos) /*!< 0x00000002 */ +#define PSSI_IER_OVR_IE PSSI_IER_OVR_IE_Msk /*!< Data buffer overrun/underrun interrupt enable */ + +/******************** Bit definition for PSSI_MIS register ******************/ +#define PSSI_MIS_OVR_MIS_Pos (1U) +#define PSSI_MIS_OVR_MIS_Msk (0x1UL << PSSI_MIS_OVR_MIS_Pos) /*!< 0x00000002 */ +#define PSSI_MIS_OVR_MIS PSSI_MIS_OVR_MIS_Msk /*!< Data buffer overrun/underrun masked interrupt status */ + +/******************** Bit definition for PSSI_ICR register ******************/ +#define PSSI_ICR_OVR_ISC_Pos (1U) +#define PSSI_ICR_OVR_ISC_Msk (0x1UL << PSSI_ICR_OVR_ISC_Pos) /*!< 0x00000002 */ +#define PSSI_ICR_OVR_ISC PSSI_ICR_OVR_ISC_Msk /*!< Data buffer overrun/underrun interrupt status clear */ + +/******************** Bit definition for PSSI_DR register *******************/ +#define PSSI_DR_DR_Pos (0U) +#define PSSI_DR_DR_Msk (0xFFFFFFFFUL << PSSI_DR_DR_Pos) /*!< 0xFFFFFFF */ +#define PSSI_DR_DR PSSI_DR_DR_Msk /*!< Data register */ + + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PWR_CR1 register *******************/ +#define PWR_CR1_SVOS_Pos (0U) +#define PWR_CR1_SVOS_Msk (0x1UL << PWR_CR1_SVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_SVOS PWR_CR1_SVOS_Msk /*!< System STOP mode Voltage Scaling selection. */ + +#define PWR_CR1_PVDE_Pos (4U) +#define PWR_CR1_PVDE_Msk (0x1UL << PWR_CR1_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR1_PVDE PWR_CR1_PVDE_Msk /*!< Programmable Voltage detector enable. */ + +#define PWR_CR1_PLS_Pos (5U) +#define PWR_CR1_PLS_Msk (0x7UL << PWR_CR1_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR1_PLS PWR_CR1_PLS_Msk /*!< Programmable Voltage Detector level selection */ +#define PWR_CR1_PLS_0 (0x1UL << PWR_CR1_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_PLS_1 (0x2UL << PWR_CR1_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR1_PLS_2 (0x4UL << PWR_CR1_PLS_Pos) /*!< 0x00000080 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Back-up domain Protection */ + +#define PWR_CR1_FLPS_Pos (9U) +#define PWR_CR1_FLPS_Msk (0x1UL << PWR_CR1_FLPS_Pos) /*!< 0x00000200 */ +#define PWR_CR1_FLPS PWR_CR1_FLPS_Msk /*!< Flash low power mode in STOP */ + +#define PWR_CR1_BOOSTE_Pos (11U) +#define PWR_CR1_BOOSTE_Msk (0x1UL << PWR_CR1_BOOSTE_Pos) /*!< 0x00000800 */ +#define PWR_CR1_BOOSTE PWR_CR1_BOOSTE_Msk /*!< Analog Switch VBoost control. */ + +#define PWR_CR1_AVDREADY_Pos (12) +#define PWR_CR1_AVDREADY_Msk (0x1UL << PWR_CR1_AVDREADY_Pos) /*!< 0x00001000 */ +#define PWR_CR1_AVDREADY PWR_CR1_AVDREADY_Msk /*!< Analog Voltage Ready. */ + +#define PWR_CR1_AVDEN_Pos (13U) +#define PWR_CR1_AVDEN_Msk (0x1UL << PWR_CR1_AVDEN_Pos) /*!< 0x00002000 */ +#define PWR_CR1_AVDEN PWR_CR1_AVDEN_Msk /*!< Analog Voltage Detector Enable */ + +#define PWR_CR1_ALS_Pos (14U) +#define PWR_CR1_ALS_Msk (0x3UL << PWR_CR1_ALS_Pos) /*!< 0x0000A000 */ +#define PWR_CR1_ALS PWR_CR1_ALS_Msk /*!< Analog Voltage Detector level selection */ +#define PWR_CR1_ALS_0 (0x1UL << PWR_CR1_ALS_Pos) /*!< 0x00004000 */ +#define PWR_CR1_ALS_1 (0x2UL << PWR_CR1_ALS_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_ACTVOS_Pos (0U) +#define PWR_SR1_ACTVOS_Msk (0x1UL << PWR_SR1_ACTVOS_Pos) /*!< 0x00000001 */ +#define PWR_SR1_ACTVOS PWR_SR1_ACTVOS_Msk /*!< VOS currently applied for VCORE voltage scaling selection */ + +#define PWR_SR1_ACTVOSRDY_Pos (1U) +#define PWR_SR1_ACTVOSRDY_Msk (0x1UL << PWR_SR1_ACTVOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_SR1_ACTVOSRDY PWR_SR1_ACTVOSRDY_Msk /*!< Ready bit for current actual used VOS for VDD11 Voltage Scaling */ + +#define PWR_SR1_PVDO_Pos (4U) +#define PWR_SR1_PVDO_Msk (0x1UL << PWR_SR1_PVDO_Pos) /*!< 0x00000010 */ +#define PWR_SR1_PVDO PWR_SR1_PVDO_Msk /*!< Programmable Voltage Detect Output */ + +#define PWR_SR1_AVDO_Pos (13U) +#define PWR_SR1_AVDO_Msk (0x1UL << PWR_SR1_AVDO_Pos) /*!< 0x00002000 */ +#define PWR_SR1_AVDO PWR_SR1_AVDO_Msk /*!< Analog Voltage Detect Output on VDDA */ + +/******************** Bit definition for PWR_CSR1 register ********************/ +#define PWR_CSR1_BREN_Pos (0U) +#define PWR_CSR1_BREN_Msk (0x1UL << PWR_CSR1_BREN_Pos) /*!< 0x00000001 */ +#define PWR_CSR1_BREN PWR_CSR1_BREN_Msk /*!< Backup regulator enable */ + +#define PWR_CSR1_MONEN_Pos (4U) +#define PWR_CSR1_MONEN_Msk (0x1UL << PWR_CSR1_MONEN_Pos) /*!< 0x00000010 */ +#define PWR_CSR1_MONEN PWR_CSR1_MONEN_Msk /*!< VBAT and temperature monitoring enable */ + +#define PWR_CSR1_BRRDY_Pos (16U) +#define PWR_CSR1_BRRDY_Msk (0x1UL << PWR_CSR1_BRRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR1_BRRDY PWR_CSR1_BRRDY_Msk /*!< Backup regulator ready */ + +#define PWR_CSR1_VBATL_Pos (20U) +#define PWR_CSR1_VBATL_Msk (0x1UL << PWR_CSR1_VBATL_Pos) /*!< 0x00100000 */ +#define PWR_CSR1_VBATL PWR_CSR1_VBATL_Msk /*!< Monitored VBAT level above low threshold */ + +#define PWR_CSR1_VBATH_Pos (21U) +#define PWR_CSR1_VBATH_Msk (0x1UL << PWR_CSR1_VBATH_Pos) /*!< 0x00200000 */ +#define PWR_CSR1_VBATH PWR_CSR1_VBATH_Msk /*!< Monitored VBAT level above high threshold */ + +#define PWR_CSR1_TEMPL_Pos (22U) +#define PWR_CSR1_TEMPL_Msk (0x1UL << PWR_CSR1_TEMPL_Pos) /*!< 0x00400000 */ +#define PWR_CSR1_TEMPL PWR_CSR1_TEMPL_Msk /*!< Monitored temperature level above low threshold */ + +#define PWR_CSR1_TEMPH_Pos (23U) +#define PWR_CSR1_TEMPH_Msk (0x1UL << PWR_CSR1_TEMPH_Pos) /*!< 0x00800000 */ +#define PWR_CSR1_TEMPH PWR_CSR1_TEMPH_Msk /*!< Monitored temperature level above high threshold */ + +/******************** Bit definition for PWR_CSR2 register ********************/ +#define PWR_CSR2_BYPASS_Pos (0U) +#define PWR_CSR2_BYPASS_Msk (0x1UL << PWR_CSR2_BYPASS_Pos) /*!< 0x00000001 */ +#define PWR_CSR2_BYPASS PWR_CSR2_BYPASS_Msk /*!< Power Management Unit bypass */ + +#define PWR_CSR2_LDOEN_Pos (1U) +#define PWR_CSR2_LDOEN_Msk (0x1UL << PWR_CSR2_LDOEN_Pos) /*!< 0x00000002 */ +#define PWR_CSR2_LDOEN PWR_CSR2_LDOEN_Msk /*!< Low Drop-Out regulator enable */ + +#define PWR_CSR2_SDEN_Pos (2U) +#define PWR_CSR2_SDEN_Msk (0x1UL << PWR_CSR2_SDEN_Pos) /*!< 0x00000004 */ +#define PWR_CSR2_SDEN PWR_CSR2_SDEN_Msk /*!< SMPS Step-down converter enable */ + +#define PWR_CSR2_SMPSEXTHP_Pos (3U) +#define PWR_CSR2_SMPSEXTHP_Msk (0x1UL << PWR_CSR2_SMPSEXTHP_Pos) /*!< 0x00000008 */ +#define PWR_CSR2_SMPSEXTHP PWR_CSR2_SMPSEXTHP_Msk /*!< SMPS external power delivery selection */ + +#define PWR_CSR2_SDHILEVEL_Pos (4U) +#define PWR_CSR2_SDHILEVEL_Msk (0x1UL << PWR_CSR2_SDHILEVEL_Pos) /*!< 0x00000030 */ +#define PWR_CSR2_SDHILEVEL PWR_CSR2_SDHILEVEL_Msk /*!< SMPS step-down converter voltage output for LDO or external supply */ + +#define PWR_CSR2_VBE_Pos (8U) +#define PWR_CSR2_VBE_Msk (0x1UL << PWR_CSR2_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CSR2_VBE PWR_CSR2_VBE_Msk /*!< VBAT charging enable */ + +#define PWR_CSR2_VBRS_Pos (9U) +#define PWR_CSR2_VBRS_Msk (0x1UL << PWR_CSR2_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CSR2_VBRS PWR_CSR2_VBRS_Msk /*!< VBAT charging resistor selection */ + +#define PWR_CSR2_XSPICAP1_Pos (10U) +#define PWR_CSR2_XSPICAP1_Msk (0x3UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000C00 */ +#define PWR_CSR2_XSPICAP1 PWR_CSR2_XSPICAP1_Msk /*!< XSPI port 1 capacitor control bits */ +#define PWR_CSR2_XSPICAP1_0 (0x1UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000400 */ +#define PWR_CSR2_XSPICAP1_1 (0x2UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000800 */ + +#define PWR_CSR2_XSPICAP2_Pos (12U) +#define PWR_CSR2_XSPICAP2_Msk (0x3UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00003000 */ +#define PWR_CSR2_XSPICAP2 PWR_CSR2_XSPICAP2_Msk /*!< XSPI port 2 capacitor control bits */ +#define PWR_CSR2_XSPICAP2_0 (0x1UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00001000 */ +#define PWR_CSR2_XSPICAP2_1 (0x2UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00002000 */ + +#define PWR_CSR2_EN_XSPIM1_Pos (14U) +#define PWR_CSR2_EN_XSPIM1_Msk (0x1UL << PWR_CSR2_EN_XSPIM1_Pos) /*!< 0x00004000 */ +#define PWR_CSR2_EN_XSPIM1 PWR_CSR2_EN_XSPIM1_Msk /*!< XSPIM1 external supply enable */ + +#define PWR_CSR2_EN_XSPIM2_Pos (15U) +#define PWR_CSR2_EN_XSPIM2_Msk (0x1UL << PWR_CSR2_EN_XSPIM2_Pos) /*!< 0x00008000 */ +#define PWR_CSR2_EN_XSPIM2 PWR_CSR2_EN_XSPIM2_Msk /*!< XSPIM2 external supply enable */ + +#define PWR_CSR2_SDEXTRDY_Pos (16U) +#define PWR_CSR2_SDEXTRDY_Msk (0x1UL << PWR_CSR2_SDEXTRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR2_SDEXTRDY PWR_CSR2_SDEXTRDY_Msk /*!< SMPS External supply ready */ + +#define PWR_CSR2_USB33DEN_Pos (24U) +#define PWR_CSR2_USB33DEN_Msk (0x1UL << PWR_CSR2_USB33DEN_Pos) /*!< 0x01000000 */ +#define PWR_CSR2_USB33DEN PWR_CSR2_USB33DEN_Msk /*!< VDD33_USB voltage level detector enable */ + +#define PWR_CSR2_USBREGEN_Pos (25U) +#define PWR_CSR2_USBREGEN_Msk (0x1UL << PWR_CSR2_USBREGEN_Pos) /*!< 0x02000000 */ +#define PWR_CSR2_USBREGEN PWR_CSR2_USBREGEN_Msk /*!< USB regulator enable */ + +#define PWR_CSR2_USB33RDY_Pos (26U) +#define PWR_CSR2_USB33RDY_Msk (0x1UL << PWR_CSR2_USB33RDY_Pos) /*!< 0x04000000 */ +#define PWR_CSR2_USB33RDY PWR_CSR2_USB33RDY_Msk /*!< USB supply ready */ + +#define PWR_CSR2_USBHSREGEN_Pos (27U) +#define PWR_CSR2_USBHSREGEN_Msk (0x1UL << PWR_CSR2_USBHSREGEN_Pos) /*!< 0x08000000 */ +#define PWR_CSR2_USBHSREGEN PWR_CSR2_USBHSREGEN_Msk /*!< USB HS regulator enable */ + +/******************** Bit definition for PWR_CSR3 register ********************/ +#define PWR_CSR3_PDDS_Pos (0U) +#define PWR_CSR3_PDDS_Msk (0x1UL << PWR_CSR3_PDDS_Pos) /*!< 0x00000001 */ +#define PWR_CSR3_PDDS PWR_CSR3_PDDS_Msk /*!< D1 domain Power Down Deepsleep */ + +#define PWR_CSR3_CSSF_Pos (1U) +#define PWR_CSR3_CSSF_Msk (0x1UL << PWR_CSR3_CSSF_Pos) /*!< 0x00000002 */ +#define PWR_CSR3_CSSF PWR_CSR3_CSSF_Msk /*!< Clear Standby and Stop flag */ + +#define PWR_CSR3_STOPF_Pos (8U) +#define PWR_CSR3_STOPF_Msk (0x1UL << PWR_CSR3_STOPF_Pos) /*!< 0x00000080 */ +#define PWR_CSR3_STOPF PWR_CSR3_STOPF_Msk /*!< STOP Flag */ + +#define PWR_CSR3_SBF_Pos (9U) +#define PWR_CSR3_SBF_Msk (0x1UL << PWR_CSR3_SBF_Pos) /*!< 0x00000100 */ +#define PWR_CSR3_SBF PWR_CSR3_SBF_Msk /*!< System STANDBY Flag */ + +/******************** Bit definition for PWR_CSR4 register ********************/ +#define PWR_CSR4_VOS_Pos (0U) +#define PWR_CSR4_VOS_Msk (0x1UL << PWR_CSR4_VOS_Pos) /*!< 0x00000001 */ +#define PWR_CSR4_VOS PWR_CSR4_VOS_Msk /*!< Voltage Scaling selection according performance */ + +#define PWR_CSR4_VOSRDY_Pos (1U) +#define PWR_CSR4_VOSRDY_Msk (0x1UL << PWR_CSR4_VOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_CSR4_VOSRDY PWR_CSR4_VOSRDY_Msk /*!< VOSRDY: VOS Ready bit for VCORE voltage scaling output selection. */ + +/******************** Bit definition for PWR_WKUPCR register ********************/ +#define PWR_WKUPCR_WKUPC_Pos (0U) +#define PWR_WKUPCR_WKUPC_Msk (0xFUL << PWR_WKUPCR_WKUPC_Pos) /*!< 0x0000000F */ +#define PWR_WKUPCR_WKUPC PWR_WKUPCR_WKUPC_Msk /*!< Clear Wakeup Pin Flag 1 to 4 */ +#define PWR_WKUPCR_WKUPC1_Pos (0U) +#define PWR_WKUPCR_WKUPC1_Msk (0x1UL << PWR_WKUPCR_WKUPC1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1_Msk /*!< Clear Wakeup Pin Flag 1 */ +#define PWR_WKUPCR_WKUPC2_Pos (1U) +#define PWR_WKUPCR_WKUPC2_Msk (0x1UL << PWR_WKUPCR_WKUPC2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2_Msk /*!< Clear Wakeup Pin Flag 2 */ +#define PWR_WKUPCR_WKUPC3_Pos (2U) +#define PWR_WKUPCR_WKUPC3_Msk (0x1UL << PWR_WKUPCR_WKUPC3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3_Msk /*!< Clear Wakeup Pin Flag 3 */ +#define PWR_WKUPCR_WKUPC4_Pos (3U) +#define PWR_WKUPCR_WKUPC4_Msk (0x1UL << PWR_WKUPCR_WKUPC4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4_Msk /*!< Clear Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPFR register ********************/ +#define PWR_WKUPFR_WKUPF1_Pos (0U) +#define PWR_WKUPFR_WKUPF1_Msk (0x1UL << PWR_WKUPFR_WKUPF1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1_Msk /*!< Wakeup Pin Flag 1 */ +#define PWR_WKUPFR_WKUPF2_Pos (1U) +#define PWR_WKUPFR_WKUPF2_Msk (0x1UL << PWR_WKUPFR_WKUPF2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2_Msk /*!< Wakeup Pin Flag 2 */ +#define PWR_WKUPFR_WKUPF3_Pos (2U) +#define PWR_WKUPFR_WKUPF3_Msk (0x1UL << PWR_WKUPFR_WKUPF3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3_Msk /*!< Wakeup Pin Flag 3 */ +#define PWR_WKUPFR_WKUPF4_Pos (3U) +#define PWR_WKUPFR_WKUPF4_Msk (0x1UL << PWR_WKUPFR_WKUPF4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4_Msk /*!< Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPEPR register ********************/ +#define PWR_WKUPEPR_WKUPEN_Pos (0U) +#define PWR_WKUPEPR_WKUPEN_Msk (0x0FUL << PWR_WKUPEPR_WKUPEN_Pos) /*!< 0x0000000F */ +#define PWR_WKUPEPR_WKUPEN PWR_WKUPEPR_WKUPEN_Msk /*!< Enable all Wakeup Pin */ +#define PWR_WKUPEPR_WKUPEN1_Pos (0U) +#define PWR_WKUPEPR_WKUPEN1_Msk (0x1UL << PWR_WKUPEPR_WKUPEN1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPEPR_WKUPEN1 PWR_WKUPEPR_WKUPEN1_Msk /*!< Enable Wakeup Pin WKUP1 */ +#define PWR_WKUPEPR_WKUPEN2_Pos (1U) +#define PWR_WKUPEPR_WKUPEN2_Msk (0x1UL << PWR_WKUPEPR_WKUPEN2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPEPR_WKUPEN2 PWR_WKUPEPR_WKUPEN2_Msk /*!< Enable Wakeup Pin WKUP2 */ +#define PWR_WKUPEPR_WKUPEN3_Pos (2U) +#define PWR_WKUPEPR_WKUPEN3_Msk (0x1UL << PWR_WKUPEPR_WKUPEN3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPEPR_WKUPEN3 PWR_WKUPEPR_WKUPEN3_Msk /*!< Enable Wakeup Pin WKUP3 */ +#define PWR_WKUPEPR_WKUPEN4_Pos (3U) +#define PWR_WKUPEPR_WKUPEN4_Msk (0x1UL << PWR_WKUPEPR_WKUPEN4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPEPR_WKUPEN4 PWR_WKUPEPR_WKUPEN4_Msk /*!< Enable Wakeup Pin WKUP4 */ + +#define PWR_WKUPEPR_WKUPP_Pos (8U) +#define PWR_WKUPEPR_WKUPP_Msk (0x0FUL << PWR_WKUPEPR_WKUPP_Pos) /*!< 0x0000F00 */ +#define PWR_WKUPEPR_WKUPP PWR_WKUPEPR_WKUPP_Msk /*!< Wakeup Pin Polarity for WKUP1 to WKUP4 */ +#define PWR_WKUPEPR_WKUPP1_Pos (8U) +#define PWR_WKUPEPR_WKUPP1_Msk (0x1UL << PWR_WKUPEPR_WKUPP1_Pos) /*!< 0x00000100 */ +#define PWR_WKUPEPR_WKUPP1 PWR_WKUPEPR_WKUPP1_Msk /*!< Wakeup Pin Polarity for WKUP1 */ +#define PWR_WKUPEPR_WKUPP2_Pos (9U) +#define PWR_WKUPEPR_WKUPP2_Msk (0x1UL << PWR_WKUPEPR_WKUPP2_Pos) /*!< 0x00000200 */ +#define PWR_WKUPEPR_WKUPP2 PWR_WKUPEPR_WKUPP2_Msk /*!< Wakeup Pin Polarity for WKUP2 */ +#define PWR_WKUPEPR_WKUPP3_Pos (10U) +#define PWR_WKUPEPR_WKUPP3_Msk (0x1UL << PWR_WKUPEPR_WKUPP3_Pos) /*!< 0x00000400 */ +#define PWR_WKUPEPR_WKUPP3 PWR_WKUPEPR_WKUPP3_Msk /*!< Wakeup Pin Polarity for WKUP3 */ +#define PWR_WKUPEPR_WKUPP4_Pos (11U) +#define PWR_WKUPEPR_WKUPP4_Msk (0x1UL << PWR_WKUPEPR_WKUPP4_Pos) /*!< 0x00000800 */ +#define PWR_WKUPEPR_WKUPP4 PWR_WKUPEPR_WKUPP4_Msk /*!< Wakeup Pin Polarity for WKUP4 */ + +#define PWR_WKUPEPR_WKUPPUPD1_Pos (16U) +#define PWR_WKUPEPR_WKUPPUPD1_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00030000 */ +#define PWR_WKUPEPR_WKUPPUPD1 PWR_WKUPEPR_WKUPPUPD1_Msk /*!< Wakeup Pin pull configuration for WKUP1 */ +#define PWR_WKUPEPR_WKUPPUPD1_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00010000 */ +#define PWR_WKUPEPR_WKUPPUPD1_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00020000 */ +#define PWR_WKUPEPR_WKUPPUPD2_Pos (18U) +#define PWR_WKUPEPR_WKUPPUPD2_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x000C0000 */ +#define PWR_WKUPEPR_WKUPPUPD2 PWR_WKUPEPR_WKUPPUPD2_Msk /*!< Wakeup Pin pull configuration for WKUP2 */ +#define PWR_WKUPEPR_WKUPPUPD2_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00040000 */ +#define PWR_WKUPEPR_WKUPPUPD2_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00080000 */ +#define PWR_WKUPEPR_WKUPPUPD3_Pos (20U) +#define PWR_WKUPEPR_WKUPPUPD3_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00300000 */ +#define PWR_WKUPEPR_WKUPPUPD3 PWR_WKUPEPR_WKUPPUPD3_Msk /*!< Wakeup Pin pull configuration for WKUP3 */ +#define PWR_WKUPEPR_WKUPPUPD3_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00100000 */ +#define PWR_WKUPEPR_WKUPPUPD3_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00200000 */ +#define PWR_WKUPEPR_WKUPPUPD4_Pos (22U) +#define PWR_WKUPEPR_WKUPPUPD4_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00C00000 */ +#define PWR_WKUPEPR_WKUPPUPD4 PWR_WKUPEPR_WKUPPUPD4_Msk /*!< Wakeup Pin pull configuration for WKUP4 */ +#define PWR_WKUPEPR_WKUPPUPD4_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00400000 */ +#define PWR_WKUPEPR_WKUPPUPD4_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for PWR_UCPDRR register ********************/ +#define PWR_UCPDR_UCPD_DBDIS_Pos (0U) +#define PWR_UCPDR_UCPD_DBDIS_Msk (0x1UL << PWR_UCPDR_UCPD_DBDIS_Pos) /*!< 0x00000001 */ +#define PWR_UCPDR_UCPD_DBDIS PWR_UCPDR_UCPD_DBDIS_Msk /*!< UCPD dead battery disable */ + +#define PWR_UCPDR_UCPD_STBY_Pos (1U) +#define PWR_UCPDR_UCPD_STBY_Msk (0x1UL << PWR_UCPDR_UCPD_STBY_Pos) /*!< 0x00000002 */ +#define PWR_UCPDR_UCPD_STBY PWR_UCPDR_UCPD_STBY_Msk /*!< UCPD Standby mode */ + +/******************** Bit definition for PWR_APCR register ********************/ +#define PWR_APCR_APC_Pos (0U) +#define PWR_APCR_APC_Msk (0x1UL << PWR_APCR_APC_Pos) /*!< 0x00000001 */ +#define PWR_APCR_APC PWR_APCR_APC_Msk /*!< Apply pull configuration register */ + +#define PWR_APCR_PN7_PUPD_Pos (16U) +#define PWR_APCR_PN7_PUPD_Msk (0x1UL << PWR_APCR_PN7_PUPD_Pos) /*!< 0x00010000 */ +#define PWR_APCR_PN7_PUPD PWR_APCR_PN7_PUPD_Msk /*!< Port N bit 7 pull-up/down configuration */ + +#define PWR_APCR_PO5_PUPD_Pos (17) +#define PWR_APCR_PO5_PUPD_Msk (0x1UL << PWR_APCR_PO5_PUPD_Pos) /*!< 0x00020000 */ +#define PWR_APCR_PO5_PUPD PWR_APCR_PO5_PUPD_Msk /*!< Port O bit 5 pull-up/down configuration */ + +#define PWR_APCR_I3CPB6_PU_Pos (28U) +#define PWR_APCR_I3CPB6_PU_Msk (0x1UL << PWR_APCR_I3CPB6_PU_Pos) /*!< 0x10000000 */ +#define PWR_APCR_I3CPB6_PU PWR_APCR_I3CPB6_PU_Msk /*!< Port PB6 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB7_PU_Pos (29U) +#define PWR_APCR_I3CPB7_PU_Msk (0x1UL << PWR_APCR_I3CPB7_PU_Pos) /*!< 0x20000000 */ +#define PWR_APCR_I3CPB7_PU PWR_APCR_I3CPB7_PU_Msk /*!< Port PB7 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB8_PU_Pos (30U) +#define PWR_APCR_I3CPB8_PU_Msk (0x1UL << PWR_APCR_I3CPB8_PU_Pos) /*!< 0x40000000 */ +#define PWR_APCR_I3CPB8_PU PWR_APCR_I3CPB8_PU_Msk /*!< Port PB8 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB9_PU_Pos (31U) +#define PWR_APCR_I3CPB9_PU_Msk (0x1UL << PWR_APCR_I3CPB9_PU_Pos) /*!< 0x80000000 */ +#define PWR_APCR_I3CPB9_PU PWR_APCR_I3CPB9_PU_Msk /*!< Port PB9 I3C pull-up bit configuration */ + +/******************** Bit definition for PWR_PUCRN register ********************/ +#define PWR_PUCRN_PUN1_Pos (1U) +#define PWR_PUCRN_PUN1_Msk (0x1UL << PWR_PUCRN_PUN1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRN_PUN1 PWR_PUCRN_PUN1_Msk /*!< PUN1: Port N pull-up */ + +#define PWR_PUCRN_PUN6_Pos (6U) +#define PWR_PUCRN_PUN6_Msk (0x1UL << PWR_PUCRN_PUN6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRN_PUN6 PWR_PUCRN_PUN6_Msk /*!< PUN6: Port N pull-up */ + +#define PWR_PUCRN_PUN12_Pos (12U) +#define PWR_PUCRN_PUN12_Msk (0x1UL << PWR_PUCRN_PUN12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRN_PUN12 PWR_PUCRN_PUN12_Msk /*!< PUN12: Port N pull-up */ + +/******************** Bit definition for PWR_PDCRN register ********************/ +#define PWR_PDCRN_PDN0_Pos (0U) +#define PWR_PDCRN_PDN0_Msk (0x1UL << PWR_PDCRN_PDN0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRN_PDN0 PWR_PDCRN_PDN0_Msk /*!< PDN0: Port N pull-down */ + +#define PWR_PDCRN_PDN1_Pos (1U) +#define PWR_PDCRN_PDN1_Msk (0x1UL << PWR_PDCRN_PDN1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRN_PDN1 PWR_PDCRN_PDN1_Msk /*!< PDN1: Port N pull-down */ + +#define PWR_PDCRN_PDN2N5_Pos (2U) +#define PWR_PDCRN_PDN2N5_Msk (0x1UL << PWR_PDCRN_PDN2N5_Pos) /*!< 0x00000004 */ +#define PWR_PDCRN_PDN2N5 PWR_PDCRN_PDN2N5_Msk /*!< PDN2 to PDN5: Port N pull-down */ + +#define PWR_PDCRN_PDN6_Pos (6U) +#define PWR_PDCRN_PDN6_Msk (0x1UL << PWR_PDCRN_PDN6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRN_PDN6 PWR_PDCRN_PDN6_Msk /*!< PDN6: Port N pull-down */ + +#define PWR_PDCRN_PDN8N11_Pos (8U) +#define PWR_PDCRN_PDN8N11_Msk (0x1UL << PWR_PDCRN_PDN8N11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRN_PDN8N11 PWR_PDCRN_PDN8N11_Msk /*!< PDN8 to PDN11: Port N pull-down */ + +#define PWR_PDCRN_PDN12_Pos (12U) +#define PWR_PDCRN_PDN12_Msk (0x1UL << PWR_PDCRN_PDN12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRN_PDN12 PWR_PDCRN_PDN12_Msk /*!< PDN12: Port N pull-down */ + +/******************** Bit definition for PWR_PUCRO register ********************/ +#define PWR_PUCRO_PUO0_Pos (0U) +#define PWR_PUCRO_PUO0_Msk (0x1UL << PWR_PUCRO_PUO0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRO_PUO0 PWR_PUCRO_PUO0_Msk /*!< PUO0: Port O pull-up */ + +#define PWR_PUCRO_PUO1_Pos (1U) +#define PWR_PUCRO_PUO1_Msk (0x1UL << PWR_PUCRO_PUO1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRO_PUO1 PWR_PUCRO_PUO1_Msk /*!< PUO1: Port O pull-up */ + +#define PWR_PUCRO_PUO4_Pos (4U) +#define PWR_PUCRO_PUO4_Msk (0x1UL << PWR_PUCRO_PUO4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRO_PUO4 PWR_PUCRO_PUO4_Msk /*!< PUO4: Port O pull-up */ + +/******************** Bit definition for PWR_PDCRO register ********************/ +#define PWR_PDCRO_PDO0_Pos (0U) +#define PWR_PDCRO_PDO0_Msk (0x1UL << PWR_PDCRO_PDO0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRO_PDO0 PWR_PDCRO_PDO0_Msk /*!< PDO0: Port O pull-down */ + +#define PWR_PDCRO_PDO1_Pos (1U) +#define PWR_PDCRO_PDO1_Msk (0x1UL << PWR_PDCRO_PDO1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRO_PDO1 PWR_PDCRO_PDO1_Msk /*!< PDO1: Port O pull-down */ + +#define PWR_PDCRO_PDO2_Pos (2U) +#define PWR_PDCRO_PDO2_Msk (0x1UL << PWR_PDCRO_PDO2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRO_PDO2 PWR_PDCRO_PDO2_Msk /*!< PDO2: Port O pull-down */ + +#define PWR_PDCRO_PDO3_Pos (3U) +#define PWR_PDCRO_PDO3_Msk (0x1UL << PWR_PDCRO_PDO3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRO_PDO3 PWR_PDCRO_PDO3_Msk /*!< PDO3: Port O pull-down */ + +#define PWR_PDCRO_PDO4_Pos (4U) +#define PWR_PDCRO_PDO4_Msk (0x1UL << PWR_PDCRO_PDO4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRO_PDO4 PWR_PDCRO_PDO4_Msk /*!< PDO4: Port O pull-down */ + +/******************** Bit definition for PWR_PDCRP register ********************/ +#define PWR_PDCRP_PDP0P3_Pos (0U) +#define PWR_PDCRP_PDP0P3_Msk (0x1UL << PWR_PDCRP_PDP0P3_Pos) /*!< 0x00000001 */ +#define PWR_PDCRP_PDP0P3 PWR_PDCRP_PDP0P3_Msk /*!< PPO0 to PP03 : Port P pull-down */ + +#define PWR_PDCRP_PDP4P7_Pos (4U) +#define PWR_PDCRP_PDP4P7_Msk (0x1UL << PWR_PDCRP_PDP4P7_Pos) /*!< 0x00000010 */ +#define PWR_PDCRP_PDP4P7 PWR_PDCRP_PDP4P7_Msk /*!< PPO4 to PP07 : Port P pull-down */ + +#define PWR_PDCRP_PDP8P11_Pos (8U) +#define PWR_PDCRP_PDP8P11_Msk (0x1UL << PWR_PDCRP_PDP8P11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRP_PDP8P11 PWR_PDCRP_PDP8P11_Msk /*!< PPO8 to PP11 : Port P pull-down */ + +#define PWR_PDCRP_PDP12P15_Pos (12U) +#define PWR_PDCRP_PDP12P15_Msk (0x1UL << PWR_PDCRP_PDP12P15_Pos) /*!< 0x00001000 */ +#define PWR_PDCRP_PDP12P15 PWR_PDCRP_PDP12P15_Msk /*!< PP12 to PP15 : Port P pull-down */ + + +/******************************************************************************/ +/* */ +/* RAM ECC monitoring */ +/* */ +/******************************************************************************/ +/****************** Bit definition for RAMECC_IER register ******************/ +#define RAMECC_IER_GIE_Pos (0U) +#define RAMECC_IER_GIE_Msk (0x1UL << RAMECC_IER_GIE_Pos) /*!< 0x00000001 */ +#define RAMECC_IER_GIE RAMECC_IER_GIE_Msk /*!< Global interrupt enable */ +#define RAMECC_IER_GECCSEIE_Pos (1U) +#define RAMECC_IER_GECCSEIE_Msk (0x1UL << RAMECC_IER_GECCSEIE_Pos) /*!< 0x00000002 */ +#define RAMECC_IER_GECCSEIE RAMECC_IER_GECCSEIE_Msk /*!< Global ECC single error interrupt enable */ +#define RAMECC_IER_GECCDEIE_Pos (2U) +#define RAMECC_IER_GECCDEIE_Msk (0x1UL << RAMECC_IER_GECCDEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_IER_GECCDEIE RAMECC_IER_GECCDEIE_Msk /*!< Global ECC double error interrupt enable */ +#define RAMECC_IER_GECCDEBWIE_Pos (3U) +#define RAMECC_IER_GECCDEBWIE_Msk (0x1UL << RAMECC_IER_GECCDEBWIE_Pos) /*!< 0x00000008 */ +#define RAMECC_IER_GECCDEBWIE RAMECC_IER_GECCDEBWIE_Msk /*!< Global ECC double error on byte write (BW) interrupt enable */ + +/******************* Bit definition for RAMECC_CR register ******************/ +#define RAMECC_CR_ECCSEIE_Pos (2U) +#define RAMECC_CR_ECCSEIE_Msk (0x1UL << RAMECC_CR_ECCSEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_CR_ECCSEIE RAMECC_CR_ECCSEIE_Msk /*!< ECC single error interrupt enable */ +#define RAMECC_CR_ECCDEIE_Pos (3U) +#define RAMECC_CR_ECCDEIE_Msk (0x1UL << RAMECC_CR_ECCDEIE_Pos) /*!< 0x00000008 */ +#define RAMECC_CR_ECCDEIE RAMECC_CR_ECCDEIE_Msk /*!< ECC double error interrupt enable */ +#define RAMECC_CR_ECCDEBWIE_Pos (4U) +#define RAMECC_CR_ECCDEBWIE_Msk (0x1UL << RAMECC_CR_ECCDEBWIE_Pos) /*!< 0x00000010 */ +#define RAMECC_CR_ECCDEBWIE RAMECC_CR_ECCDEBWIE_Msk /*!< ECC double error on byte write (BW) interrupt enable */ +#define RAMECC_CR_ECCELEN_Pos (5U) +#define RAMECC_CR_ECCELEN_Msk (0x1UL << RAMECC_CR_ECCELEN_Pos) /*!< 0x00000020 */ +#define RAMECC_CR_ECCELEN RAMECC_CR_ECCELEN_Msk /*!< ECC error latching enable */ + +/******************* Bit definition for RAMECC_SR register ******************/ +#define RAMECC_SR_SEDCF_Pos (0U) +#define RAMECC_SR_SEDCF_Msk (0x1UL << RAMECC_SR_SEDCF_Pos) /*!< 0x00000001 */ +#define RAMECC_SR_SEDCF RAMECC_SR_SEDCF_Msk /*!< ECC single error detected and corrected flag */ +#define RAMECC_SR_DEDF_Pos (1U) +#define RAMECC_SR_DEDF_Msk (0x1UL << RAMECC_SR_DEDF_Pos) /*!< 0x00000002 */ +#define RAMECC_SR_DEDF RAMECC_SR_DEDF_Msk /*!< ECC double error detected flag */ +#define RAMECC_SR_DEBWDF_Pos (2U) +#define RAMECC_SR_DEBWDF_Msk (0x1UL << RAMECC_SR_DEBWDF_Pos) /*!< 0x00000004 */ +#define RAMECC_SR_DEBWDF RAMECC_SR_DEBWDF_Msk /*!< ECC double error on byte write (BW) detected flag */ + +/****************** Bit definition for RAMECC_FAR register ******************/ +#define RAMECC_FAR_FADD_Pos (0U) +#define RAMECC_FAR_FADD_Msk (0xFFFFFFFFUL << RAMECC_FAR_FADD_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FAR_FADD RAMECC_FAR_FADD_Msk /*!< ECC error failing address */ + +/****************** Bit definition for RAMECC_FDRL register *****************/ +#define RAMECC_FDRL_FDATAL_Pos (0U) +#define RAMECC_FDRL_FDATAL_Msk (0xFFFFFFFFUL << RAMECC_FDRL_FDATAL_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRL_FDATAL RAMECC_FDRL_FDATAL_Msk /*!< Failing data low */ + +/****************** Bit definition for RAMECC_FDRH register *****************/ +#define RAMECC_FDRH_FDATAH_Pos (0U) +#define RAMECC_FDRH_FDATAH_Msk (0xFFFFFFFFUL << RAMECC_FDRH_FDATAH_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRH_FDATAH RAMECC_FDRH_FDATAH_Msk /* Failing data high (64-bit memory) */ + +/***************** Bit definition for RAMECC_FECR register ******************/ +#define RAMECC_FECR_FEC_Pos (0U) +#define RAMECC_FECR_FEC_Msk (0xFFFFFFFFUL << RAMECC_FECR_FEC_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FECR_FEC RAMECC_FECR_FEC_Msk /*!< Failing error code */ + + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIKERON_Pos (1U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed clock enable in Stop mode */ +#define RCC_CR_HSIRDY_Pos (2U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000004 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSIDIV_Pos (3U) +#define RCC_CR_HSIDIV_Msk (0x3UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000018 */ +#define RCC_CR_HSIDIV RCC_CR_HSIDIV_Msk /*!< Internal High Speed clock divider selection */ +#define RCC_CR_HSIDIV_0 (0x1UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000008 */ +#define RCC_CR_HSIDIV_1 (0x2UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000010 */ + +#define RCC_CR_HSIDIVF_Pos (5U) +#define RCC_CR_HSIDIVF_Msk (0x1UL << RCC_CR_HSIDIVF_Pos) /*!< 0x00000020 */ +#define RCC_CR_HSIDIVF RCC_CR_HSIDIVF_Msk /*!< HSI Divider flag */ +#define RCC_CR_CSION_Pos (7U) +#define RCC_CR_CSION_Msk (0x1UL << RCC_CR_CSION_Pos) /*!< 0x00000080 */ +#define RCC_CR_CSION RCC_CR_CSION_Msk /*!< The Internal RC 4MHz oscillator clock enable */ +#define RCC_CR_CSIRDY_Pos (8U) +#define RCC_CR_CSIRDY_Msk (0x1UL << RCC_CR_CSIRDY_Pos) /*!< 0x00000100 */ +#define RCC_CR_CSIRDY RCC_CR_CSIRDY_Msk /*!< The Internal RC 4MHz oscillator clock ready */ +#define RCC_CR_CSIKERON_Pos (9U) +#define RCC_CR_CSIKERON_Msk (0x1UL << RCC_CR_CSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_CSIKERON RCC_CR_CSIKERON_Msk /*!< Internal RC 4MHz oscillator clock enable in Stop mode */ +#define RCC_CR_HSI48ON_Pos (12U) +#define RCC_CR_HSI48ON_Msk (0x1UL << RCC_CR_HSI48ON_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSI48ON RCC_CR_HSI48ON_Msk /*!< HSI48 clock enable clock enable */ +#define RCC_CR_HSI48RDY_Pos (13U) +#define RCC_CR_HSI48RDY_Msk (0x1UL << RCC_CR_HSI48RDY_Pos) /*!< 0x00002000 */ +#define RCC_CR_HSI48RDY RCC_CR_HSI48RDY_Msk /*!< HSI48 clock ready flag */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock bypass */ +#define RCC_CR_HSEEXT_Pos (19U) +#define RCC_CR_HSEEXT_Msk (0x1UL << RCC_CR_HSEEXT_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEEXT RCC_CR_HSEEXT_Msk /*!< External High Speed clock type in bypass mode */ +#define RCC_CR_HSECSSON_Pos (20U) +#define RCC_CR_HSECSSON_Msk (0x1UL << RCC_CR_HSECSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_HSECSSON RCC_CR_HSECSSON_Msk /*!< HSE Clock security System enable */ +#define RCC_CR_PLL1ON_Pos (24U) +#define RCC_CR_PLL1ON_Msk (0x1UL << RCC_CR_PLL1ON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLL1ON RCC_CR_PLL1ON_Msk /*!< System PLL1 clock enable */ +#define RCC_CR_PLL1RDY_Pos (25U) +#define RCC_CR_PLL1RDY_Msk (0x1UL << RCC_CR_PLL1RDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLL1RDY RCC_CR_PLL1RDY_Msk /*!< System PLL1 clock ready flag */ +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< System PLL2 clock enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< System PLL2 clock ready flag */ +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< System PLL3 clock enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< System PLL3 clock ready flag */ + +/******************** Bit definition for RCC_HSICFGR register ***************/ +/*!< HSICAL configuration */ +#define RCC_HSICFGR_HSICAL_Pos (0U) +#define RCC_HSICFGR_HSICAL_Msk (0xFFFUL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000FFF */ +#define RCC_HSICFGR_HSICAL RCC_HSICFGR_HSICAL_Msk /*!< HSICAL[11:0] bits */ +#define RCC_HSICFGR_HSICAL_0 (0x001UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000001 */ +#define RCC_HSICFGR_HSICAL_1 (0x002UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000002 */ +#define RCC_HSICFGR_HSICAL_2 (0x004UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000004 */ +#define RCC_HSICFGR_HSICAL_3 (0x008UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000008 */ +#define RCC_HSICFGR_HSICAL_4 (0x010UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000010 */ +#define RCC_HSICFGR_HSICAL_5 (0x020UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000020 */ +#define RCC_HSICFGR_HSICAL_6 (0x040UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000040 */ +#define RCC_HSICFGR_HSICAL_7 (0x080UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000080 */ +#define RCC_HSICFGR_HSICAL_8 (0x100UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000100 */ +#define RCC_HSICFGR_HSICAL_9 (0x200UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000200 */ +#define RCC_HSICFGR_HSICAL_10 (0x400UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000400 */ +#define RCC_HSICFGR_HSICAL_11 (0x800UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000800 */ + +/*!< HSITRIM configuration */ +#define RCC_HSICFGR_HSITRIM_Pos (24U) +#define RCC_HSICFGR_HSITRIM_Msk (0x7FUL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_HSICFGR_HSITRIM RCC_HSICFGR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_HSICFGR_HSITRIM_0 (0x01UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_HSICFGR_HSITRIM_1 (0x02UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_HSICFGR_HSITRIM_2 (0x04UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_HSICFGR_HSITRIM_3 (0x08UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_HSICFGR_HSITRIM_4 (0x10UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_HSICFGR_HSITRIM_5 (0x20UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_HSICFGR_HSITRIM_6 (0x40UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CRRCR register *****************/ +/*!< HSI48CAL configuration */ +#define RCC_CRRCR_HSI48CAL_Pos (0U) +#define RCC_CRRCR_HSI48CAL_Msk (0x3FFUL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x000003FF */ +#define RCC_CRRCR_HSI48CAL RCC_CRRCR_HSI48CAL_Msk /*!< HSI48CAL[9:0] bits */ +#define RCC_CRRCR_HSI48CAL_0 (0x001UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000001 */ +#define RCC_CRRCR_HSI48CAL_1 (0x002UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000002 */ +#define RCC_CRRCR_HSI48CAL_2 (0x004UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000004 */ +#define RCC_CRRCR_HSI48CAL_3 (0x008UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000008 */ +#define RCC_CRRCR_HSI48CAL_4 (0x010UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000010 */ +#define RCC_CRRCR_HSI48CAL_5 (0x020UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000020 */ +#define RCC_CRRCR_HSI48CAL_6 (0x040UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000040 */ +#define RCC_CRRCR_HSI48CAL_7 (0x080UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000080 */ +#define RCC_CRRCR_HSI48CAL_8 (0x100UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000100 */ +#define RCC_CRRCR_HSI48CAL_9 (0x200UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_CSICFGR register ***************/ +/*!< CSICAL configuration */ +#define RCC_CSICFGR_CSICAL_Pos (0U) +#define RCC_CSICFGR_CSICAL_Msk (0xFFUL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x000000FF */ +#define RCC_CSICFGR_CSICAL RCC_CSICFGR_CSICAL_Msk /*!< CSICAL[7:0] bits */ +#define RCC_CSICFGR_CSICAL_0 (0x01UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000001 */ +#define RCC_CSICFGR_CSICAL_1 (0x02UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000002 */ +#define RCC_CSICFGR_CSICAL_2 (0x04UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000004 */ +#define RCC_CSICFGR_CSICAL_3 (0x08UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000008 */ +#define RCC_CSICFGR_CSICAL_4 (0x10UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000010 */ +#define RCC_CSICFGR_CSICAL_5 (0x20UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000020 */ +#define RCC_CSICFGR_CSICAL_6 (0x40UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000040 */ +#define RCC_CSICFGR_CSICAL_7 (0x80UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000080 */ + +/*!< CSITRIM configuration */ +#define RCC_CSICFGR_CSITRIM_Pos (24U) +#define RCC_CSICFGR_CSITRIM_Msk (0x3FUL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x3F000000 */ +#define RCC_CSICFGR_CSITRIM RCC_CSICFGR_CSITRIM_Msk /*!< CSITRIM[5:0] bits */ +#define RCC_CSICFGR_CSITRIM_0 (0x01UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_CSICFGR_CSITRIM_1 (0x02UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_CSICFGR_CSITRIM_2 (0x04UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_CSICFGR_CSITRIM_3 (0x08UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_CSICFGR_CSITRIM_4 (0x10UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_CSICFGR_CSITRIM_5 (0x20UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x7UL << RCC_CFGR_SW_Pos) /*!< 0x00000007 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[2:0] bits (System clock switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ +#define RCC_CFGR_SW_2 (0x4UL << RCC_CFGR_SW_Pos) /*!< 0x00000004 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (3U) +#define RCC_CFGR_SWS_Msk (0x7UL << RCC_CFGR_SWS_Pos) /*!< 0x00000038 */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[2:0] bits (System clock switch status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_SWS_2 (0x4UL << RCC_CFGR_SWS_Pos) /*!< 0x00000020 */ + +#define RCC_CFGR_STOPWUCK_Pos (6U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ +#define RCC_CFGR_STOPKERWUCK_Pos (7U) +#define RCC_CFGR_STOPKERWUCK_Msk (0x1UL << RCC_CFGR_STOPKERWUCK_Pos) /*!< 0x00000080 */ +#define RCC_CFGR_STOPKERWUCK RCC_CFGR_STOPKERWUCK_Msk /*!< Kernel Clock Selection after a Wake Up from Stop */ + +/*!< RTCPRE configuration */ +#define RCC_CFGR_RTCPRE_Pos (8U) +#define RCC_CFGR_RTCPRE_Msk (0x3FUL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00003F00 */ +#define RCC_CFGR_RTCPRE RCC_CFGR_RTCPRE_Msk /*!< RTCPRE[5:0] bits (HSE division factor for RTC clock) */ +#define RCC_CFGR_RTCPRE_0 (0x01UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_RTCPRE_1 (0x02UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_RTCPRE_2 (0x04UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000400 */ +#define RCC_CFGR_RTCPRE_3 (0x08UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_RTCPRE_4 (0x10UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_RTCPRE_5 (0x20UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_TIMPRE_Pos (15U) +#define RCC_CFGR_TIMPRE_Msk (0x1UL << RCC_CFGR_TIMPRE_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_TIMPRE RCC_CFGR_TIMPRE_Msk /*!< TIMPRE configuration */ + +#define RCC_CFGR_MCO1PRE_Pos (18U) +#define RCC_CFGR_MCO1PRE_Msk (0xFUL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_MCO1PRE RCC_CFGR_MCO1PRE_Msk /*!< MCO1 configuration */ +#define RCC_CFGR_MCO1PRE_0 (0x1UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_MCO1PRE_1 (0x2UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_MCO1PRE_2 (0x4UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_MCO1PRE_3 (0x8UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_MCO1SEL_Pos (22U) +#define RCC_CFGR_MCO1SEL_Msk (0x7UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01C00000 */ +#define RCC_CFGR_MCO1SEL RCC_CFGR_MCO1SEL_Msk /*!< MCO1SEL [2:0] bits (MCO1 clock output selection) */ +#define RCC_CFGR_MCO1SEL_0 (0x1UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_MCO1SEL_1 (0x2UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00800000 */ +#define RCC_CFGR_MCO1SEL_2 (0x4UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01000000 */ + +#define RCC_CFGR_MCO2PRE_Pos (25U) +#define RCC_CFGR_MCO2PRE_Msk (0xFUL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x1E000000 */ +#define RCC_CFGR_MCO2PRE RCC_CFGR_MCO2PRE_Msk /*!< MCO2 configuration */ +#define RCC_CFGR_MCO2PRE_0 (0x1UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO2PRE_1 (0x2UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO2PRE_2 (0x4UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x08000000 */ +#define RCC_CFGR_MCO2PRE_3 (0x8UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x10000000 */ + +#define RCC_CFGR_MCO2SEL_Pos (29U) +#define RCC_CFGR_MCO2SEL_Msk (0x7UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0xE0000000 */ +#define RCC_CFGR_MCO2SEL RCC_CFGR_MCO2SEL_Msk /*!< MCO2SEL [2:0] bits (MCO2 clock output selection) */ +#define RCC_CFGR_MCO2SEL_0 (0x1UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCO2SEL_1 (0x2UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x40000000 */ +#define RCC_CFGR_MCO2SEL_2 (0x4UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CDCFGR register ****************/ +/*!< CPRE configuration */ +#define RCC_CDCFGR_CPRE_Pos (0U) +#define RCC_CDCFGR_CPRE_Msk (0xFUL << RCC_CDCFGR_CPRE_Pos) /*!< 0x0000000F */ +#define RCC_CDCFGR_CPRE RCC_CDCFGR_CPRE_Msk /*!< CPRE[3:0] bits */ +#define RCC_CDCFGR_CPRE_0 (0x1UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000001 */ +#define RCC_CDCFGR_CPRE_1 (0x2UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000002 */ +#define RCC_CDCFGR_CPRE_2 (0x4UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000004 */ +#define RCC_CDCFGR_CPRE_3 (0x8UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_BMCFGR register ****************/ +/*!< BMPRE configuration */ +#define RCC_BMCFGR_BMPRE_Pos (0U) +#define RCC_BMCFGR_BMPRE_Msk (0xFUL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x0000000F */ +#define RCC_BMCFGR_BMPRE RCC_BMCFGR_BMPRE_Msk /*!< BMPRE[3:0] bits */ +#define RCC_BMCFGR_BMPRE_0 (0x1UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000001 */ +#define RCC_BMCFGR_BMPRE_1 (0x2UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000002 */ +#define RCC_BMCFGR_BMPRE_2 (0x4UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000004 */ +#define RCC_BMCFGR_BMPRE_3 (0x8UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_APBCFGR register ***************/ +/*!< APB1 prescaler configuration */ +#define RCC_APBCFGR_PPRE1_Pos (0U) +#define RCC_APBCFGR_PPRE1_Msk (0x7UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000007 */ +#define RCC_APBCFGR_PPRE1 RCC_APBCFGR_PPRE1_Msk /*!< PPRE1[2:0] bits */ +#define RCC_APBCFGR_PPRE1_0 (0x1UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000001 */ +#define RCC_APBCFGR_PPRE1_1 (0x2UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000002 */ +#define RCC_APBCFGR_PPRE1_2 (0x4UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000004 */ + +/*!< APB2 prescaler configuration */ +#define RCC_APBCFGR_PPRE2_Pos (4U) +#define RCC_APBCFGR_PPRE2_Msk (0x7UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000070 */ +#define RCC_APBCFGR_PPRE2 RCC_APBCFGR_PPRE2_Msk /*!< PPRE2[2:0] bits */ +#define RCC_APBCFGR_PPRE2_0 (0x1UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000010 */ +#define RCC_APBCFGR_PPRE2_1 (0x2UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000020 */ +#define RCC_APBCFGR_PPRE2_2 (0x4UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000040 */ + +/*!< APB4 prescaler configuration */ +#define RCC_APBCFGR_PPRE4_Pos (8U) +#define RCC_APBCFGR_PPRE4_Msk (0x7UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000700 */ +#define RCC_APBCFGR_PPRE4 RCC_APBCFGR_PPRE4_Msk /*!< PPRE4[2:0] bits */ +#define RCC_APBCFGR_PPRE4_0 (0x1UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000100 */ +#define RCC_APBCFGR_PPRE4_1 (0x2UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000200 */ +#define RCC_APBCFGR_PPRE4_2 (0x4UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000400 */ + +/*!< APB5 prescaler configuration */ +#define RCC_APBCFGR_PPRE5_Pos (12U) +#define RCC_APBCFGR_PPRE5_Msk (0x7UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00007000 */ +#define RCC_APBCFGR_PPRE5 RCC_APBCFGR_PPRE5_Msk /*!< PPRE5[2:0] bits */ +#define RCC_APBCFGR_PPRE5_0 (0x1UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00001000 */ +#define RCC_APBCFGR_PPRE5_1 (0x2UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00002000 */ +#define RCC_APBCFGR_PPRE5_2 (0x4UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_PLLCKSELR register *************/ +#define RCC_PLLCKSELR_PLLSRC_Pos (0U) +#define RCC_PLLCKSELR_PLLSRC_Msk (0x3UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCKSELR_PLLSRC RCC_PLLCKSELR_PLLSRC_Msk /*!< DIVMx and PLLs clock source selection */ +#define RCC_PLLCKSELR_PLLSRC_0 (0x01UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_PLLSRC_1 (0x02UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000020 */ + +#define RCC_PLLCKSELR_DIVM1_Pos (4U) +#define RCC_PLLCKSELR_DIVM1_Msk (0x3FUL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x000003F0 */ +#define RCC_PLLCKSELR_DIVM1 RCC_PLLCKSELR_DIVM1_Msk /*!< DIVM1[5:0] bits */ +#define RCC_PLLCKSELR_DIVM1_0 (0x01UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_DIVM1_1 (0x02UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000020 */ +#define RCC_PLLCKSELR_DIVM1_2 (0x04UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000040 */ +#define RCC_PLLCKSELR_DIVM1_3 (0x08UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000080 */ +#define RCC_PLLCKSELR_DIVM1_4 (0x10UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000100 */ +#define RCC_PLLCKSELR_DIVM1_5 (0x20UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000200 */ + +#define RCC_PLLCKSELR_DIVM2_Pos (12U) +#define RCC_PLLCKSELR_DIVM2_Msk (0x3FUL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x0003F000 */ +#define RCC_PLLCKSELR_DIVM2 RCC_PLLCKSELR_DIVM2_Msk /*!< DIVM2[5:0] bits */ +#define RCC_PLLCKSELR_DIVM2_0 (0x01UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00001000 */ +#define RCC_PLLCKSELR_DIVM2_1 (0x02UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00002000 */ +#define RCC_PLLCKSELR_DIVM2_2 (0x04UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00004000 */ +#define RCC_PLLCKSELR_DIVM2_3 (0x08UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00008000 */ +#define RCC_PLLCKSELR_DIVM2_4 (0x10UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00010000 */ +#define RCC_PLLCKSELR_DIVM2_5 (0x20UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00020000 */ + +#define RCC_PLLCKSELR_DIVM3_Pos (20U) +#define RCC_PLLCKSELR_DIVM3_Msk (0x3FUL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x03F00000 */ +#define RCC_PLLCKSELR_DIVM3 RCC_PLLCKSELR_DIVM3_Msk /*!< DIVM3[5:0] bits */ +#define RCC_PLLCKSELR_DIVM3_0 (0x01UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00100000 */ +#define RCC_PLLCKSELR_DIVM3_1 (0x02UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00200000 */ +#define RCC_PLLCKSELR_DIVM3_2 (0x04UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00400000 */ +#define RCC_PLLCKSELR_DIVM3_3 (0x08UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00800000 */ +#define RCC_PLLCKSELR_DIVM3_4 (0x10UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x01000000 */ +#define RCC_PLLCKSELR_DIVM3_5 (0x20UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLL1FRACEN_Pos (0U) +#define RCC_PLLCFGR_PLL1FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL1FRACEN_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLL1FRACEN RCC_PLLCFGR_PLL1FRACEN_Msk /*!< PLL1 fractional latch enable */ +#define RCC_PLLCFGR_PLL1VCOSEL_Pos (1U) +#define RCC_PLLCFGR_PLL1VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL1VCOSEL_Pos) /*!< 0x00000002 */ +#define RCC_PLLCFGR_PLL1VCOSEL RCC_PLLCFGR_PLL1VCOSEL_Msk /*!< PLL1 VCO selection */ +#define RCC_PLLCFGR_PLL1SSCGEN_Pos (2U) +#define RCC_PLLCFGR_PLL1SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SSCGEN_Pos) /*!< 0x00000004 */ +#define RCC_PLLCFGR_PLL1SSCGEN RCC_PLLCFGR_PLL1SSCGEN_Msk /*!< PLL1 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL1RGE_Pos (3U) +#define RCC_PLLCFGR_PLL1RGE_Msk (0x3UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000018 */ +#define RCC_PLLCFGR_PLL1RGE RCC_PLLCFGR_PLL1RGE_Msk /*!< PLL1RGE[1:0] bits: PLL1 input frequency range */ +#define RCC_PLLCFGR_PLL1RGE_0 (0x1UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000008 */ +#define RCC_PLLCFGR_PLL1RGE_1 (0x2UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000010 */ + +#define RCC_PLLCFGR_PLL1PEN_Pos (5U) +#define RCC_PLLCFGR_PLL1PEN_Msk (0x1UL << RCC_PLLCFGR_PLL1PEN_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLL1PEN RCC_PLLCFGR_PLL1PEN_Msk /*!< PLL1 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL1QEN_Pos (6U) +#define RCC_PLLCFGR_PLL1QEN_Msk (0x1UL << RCC_PLLCFGR_PLL1QEN_Pos) /*!< 0x00000040 */ +#define RCC_PLLCFGR_PLL1QEN RCC_PLLCFGR_PLL1QEN_Msk /*!< PLL1 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL1REN_Pos (7U) +#define RCC_PLLCFGR_PLL1REN_Msk (0x1UL << RCC_PLLCFGR_PLL1REN_Pos) /*!< 0x00000080 */ +#define RCC_PLLCFGR_PLL1REN RCC_PLLCFGR_PLL1REN_Msk /*!< PLL1 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL1SEN_Pos (8U) +#define RCC_PLLCFGR_PLL1SEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SEN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLL1SEN RCC_PLLCFGR_PLL1SEN_Msk /*!< PLL1 DIVS divider output enable */ + +#define RCC_PLLCFGR_PLL2FRACEN_Pos (11U) +#define RCC_PLLCFGR_PLL2FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL2FRACEN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLL2FRACEN RCC_PLLCFGR_PLL2FRACEN_Msk /*!< PLL2 fractional latch enable */ +#define RCC_PLLCFGR_PLL2VCOSEL_Pos (12U) +#define RCC_PLLCFGR_PLL2VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL2VCOSEL_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLL2VCOSEL RCC_PLLCFGR_PLL2VCOSEL_Msk /*!< PLL2 VCO selection */ +#define RCC_PLLCFGR_PLL2SSCGEN_Pos (13U) +#define RCC_PLLCFGR_PLL2SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SSCGEN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLL2SSCGEN RCC_PLLCFGR_PLL2SSCGEN_Msk /*!< PLL2 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL2RGE_Pos (14U) +#define RCC_PLLCFGR_PLL2RGE_Msk (0x3UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x0000C000 */ +#define RCC_PLLCFGR_PLL2RGE RCC_PLLCFGR_PLL2RGE_Msk /*!< PLL2RGE[1:0] bits: PLL2 input frequency range */ +#define RCC_PLLCFGR_PLL2RGE_0 (0x1UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00004000 */ +#define RCC_PLLCFGR_PLL2RGE_1 (0x2UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00008000 */ + +#define RCC_PLLCFGR_PLL2PEN_Pos (16U) +#define RCC_PLLCFGR_PLL2PEN_Msk (0x1UL << RCC_PLLCFGR_PLL2PEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLL2PEN RCC_PLLCFGR_PLL2PEN_Msk /*!< PLL2 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL2QEN_Pos (17U) +#define RCC_PLLCFGR_PLL2QEN_Msk (0x1UL << RCC_PLLCFGR_PLL2QEN_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLL2QEN RCC_PLLCFGR_PLL2QEN_Msk /*!< PLL2 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL2REN_Pos (18U) +#define RCC_PLLCFGR_PLL2REN_Msk (0x1UL << RCC_PLLCFGR_PLL2REN_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLL2REN RCC_PLLCFGR_PLL2REN_Msk /*!< PLL2 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL2SEN_Pos (19U) +#define RCC_PLLCFGR_PLL2SEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SEN_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLL2SEN RCC_PLLCFGR_PLL2SEN_Msk /*!< PLL2 DIVS divider output enable */ +#define RCC_PLLCFGR_PLL2TEN_Pos (20U) +#define RCC_PLLCFGR_PLL2TEN_Msk (0x1UL << RCC_PLLCFGR_PLL2TEN_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLL2TEN RCC_PLLCFGR_PLL2TEN_Msk /*!< PLL2 DIVT divider output enable */ + +#define RCC_PLLCFGR_PLL3FRACEN_Pos (22U) +#define RCC_PLLCFGR_PLL3FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL3FRACEN_Pos) /*!< 0x00400000 */ +#define RCC_PLLCFGR_PLL3FRACEN RCC_PLLCFGR_PLL3FRACEN_Msk /*!< PLL3 fractional latch enable */ +#define RCC_PLLCFGR_PLL3VCOSEL_Pos (23U) +#define RCC_PLLCFGR_PLL3VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL3VCOSEL_Pos) /*!< 0x00800000 */ +#define RCC_PLLCFGR_PLL3VCOSEL RCC_PLLCFGR_PLL3VCOSEL_Msk /*!< PLL3 VCO selection */ +#define RCC_PLLCFGR_PLL3SSCGEN_Pos (24U) +#define RCC_PLLCFGR_PLL3SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SSCGEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLL3SSCGEN RCC_PLLCFGR_PLL3SSCGEN_Msk /*!< PLL3 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL3RGE_Pos (25U) +#define RCC_PLLCFGR_PLL3RGE_Msk (0x3UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x06000000 */ +#define RCC_PLLCFGR_PLL3RGE RCC_PLLCFGR_PLL3RGE_Msk /*!< PLL3RGE[1:0] bits: PLL3 input frequency range */ +#define RCC_PLLCFGR_PLL3RGE_0 (0x1UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLL3RGE_1 (0x2UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x04000000 */ + +#define RCC_PLLCFGR_PLL3PEN_Pos (27U) +#define RCC_PLLCFGR_PLL3PEN_Msk (0x1UL << RCC_PLLCFGR_PLL3PEN_Pos) /*!< 0x08000000 */ +#define RCC_PLLCFGR_PLL3PEN RCC_PLLCFGR_PLL3PEN_Msk /*!< PLL3 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL3QEN_Pos (28U) +#define RCC_PLLCFGR_PLL3QEN_Msk (0x1UL << RCC_PLLCFGR_PLL3QEN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLL3QEN RCC_PLLCFGR_PLL3QEN_Msk /*!< PLL3 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL3REN_Pos (29U) +#define RCC_PLLCFGR_PLL3REN_Msk (0x1UL << RCC_PLLCFGR_PLL3REN_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLL3REN RCC_PLLCFGR_PLL3REN_Msk /*!< PLL3 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL3SEN_Pos (30U) +#define RCC_PLLCFGR_PLL3SEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SEN_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLL3SEN RCC_PLLCFGR_PLL3SEN_Msk /*!< PLL3 DIVS divider output enable */ + +/******************** Bit definition for RCC_PLL1DIVR1 register *************/ +#define RCC_PLL1DIVR1_DIVN_Pos (0U) +#define RCC_PLL1DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL1DIVR1_DIVN RCC_PLL1DIVR1_DIVN_Msk /*!< DIVN1[8:0] bits: PLL1 DIVN division factor */ +#define RCC_PLL1DIVR1_DIVN_0 (0x001UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR1_DIVN_1 (0x002UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR1_DIVN_2 (0x004UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL1DIVR1_DIVN_3 (0x008UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL1DIVR1_DIVN_4 (0x010UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL1DIVR1_DIVN_5 (0x020UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL1DIVR1_DIVN_6 (0x040UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL1DIVR1_DIVN_7 (0x080UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL1DIVR1_DIVN_8 (0x100UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL1DIVR1_DIVP_Pos (9U) +#define RCC_PLL1DIVR1_DIVP_Msk (0x7FUL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL1DIVR1_DIVP RCC_PLL1DIVR1_DIVP_Msk /*!< DIVP1[6:0] bits: PLL1 DIVP division factor */ +#define RCC_PLL1DIVR1_DIVP_0 (0x001UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL1DIVR1_DIVP_1 (0x002UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL1DIVR1_DIVP_2 (0x004UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL1DIVR1_DIVP_3 (0x008UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL1DIVR1_DIVP_4 (0x010UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL1DIVR1_DIVP_5 (0x020UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL1DIVR1_DIVP_6 (0x040UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL1DIVR1_DIVQ_Pos (16U) +#define RCC_PLL1DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL1DIVR1_DIVQ RCC_PLL1DIVR1_DIVQ_Msk /*!< DIVQ1[6:0] bits: PLL1 DIVQ division factor */ +#define RCC_PLL1DIVR1_DIVQ_0 (0x001UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL1DIVR1_DIVQ_1 (0x002UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL1DIVR1_DIVQ_2 (0x004UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL1DIVR1_DIVQ_3 (0x008UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL1DIVR1_DIVQ_4 (0x010UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL1DIVR1_DIVQ_5 (0x020UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL1DIVR1_DIVQ_6 (0x040UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL1DIVR1_DIVR_Pos (24U) +#define RCC_PLL1DIVR1_DIVR_Msk (0x7FUL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL1DIVR1_DIVR RCC_PLL1DIVR1_DIVR_Msk /*!< DIVR1[6:0] bits: PLL1 DIVR division factor */ +#define RCC_PLL1DIVR1_DIVR_0 (0x001UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL1DIVR1_DIVR_1 (0x002UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL1DIVR1_DIVR_2 (0x004UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL1DIVR1_DIVR_3 (0x008UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL1DIVR1_DIVR_4 (0x010UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL1DIVR1_DIVR_5 (0x020UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL1DIVR1_DIVR_6 (0x040UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL1FRACR register *************/ +#define RCC_PLL1FRACR_FRACN_Pos (3U) +#define RCC_PLL1FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL1FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL1FRACR_FRACN RCC_PLL1FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL2DIVR1 register *************/ +#define RCC_PLL2DIVR1_DIVN_Pos (0U) +#define RCC_PLL2DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL2DIVR1_DIVN RCC_PLL2DIVR1_DIVN_Msk /*!< DIVN2[8:0] bits: PLL2 DIVN division factor */ +#define RCC_PLL2DIVR1_DIVN_0 (0x001UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR1_DIVN_1 (0x002UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR1_DIVN_2 (0x004UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL2DIVR1_DIVN_3 (0x008UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL2DIVR1_DIVN_4 (0x010UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL2DIVR1_DIVN_5 (0x020UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL2DIVR1_DIVN_6 (0x040UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL2DIVR1_DIVN_7 (0x080UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL2DIVR1_DIVN_8 (0x100UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL2DIVR1_DIVP_Pos (9U) +#define RCC_PLL2DIVR1_DIVP_Msk (0x7FUL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL2DIVR1_DIVP RCC_PLL2DIVR1_DIVP_Msk /*!< DIVP2[6:0] bits: PLL2 DIVP division factor */ +#define RCC_PLL2DIVR1_DIVP_0 (0x001UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR1_DIVP_1 (0x002UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL2DIVR1_DIVP_2 (0x004UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL2DIVR1_DIVP_3 (0x008UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL2DIVR1_DIVP_4 (0x010UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL2DIVR1_DIVP_5 (0x020UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL2DIVR1_DIVP_6 (0x040UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL2DIVR1_DIVQ_Pos (16U) +#define RCC_PLL2DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL2DIVR1_DIVQ RCC_PLL2DIVR1_DIVQ_Msk /*!< DIVQ2[6:0] bits: PLL2 DIVQ division factor */ +#define RCC_PLL2DIVR1_DIVQ_0 (0x001UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL2DIVR1_DIVQ_1 (0x002UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL2DIVR1_DIVQ_2 (0x004UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL2DIVR1_DIVQ_3 (0x008UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL2DIVR1_DIVQ_4 (0x010UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL2DIVR1_DIVQ_5 (0x020UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL2DIVR1_DIVQ_6 (0x040UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL2DIVR1_DIVR_Pos (24U) +#define RCC_PLL2DIVR1_DIVR_Msk (0x7FUL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL2DIVR1_DIVR RCC_PLL2DIVR1_DIVR_Msk /*!< DIVR2[6:0] bits: PLL2 DIVR division factor */ +#define RCC_PLL2DIVR1_DIVR_0 (0x001UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL2DIVR1_DIVR_1 (0x002UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL2DIVR1_DIVR_2 (0x004UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL2DIVR1_DIVR_3 (0x008UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL2DIVR1_DIVR_4 (0x010UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL2DIVR1_DIVR_5 (0x020UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL2DIVR1_DIVR_6 (0x040UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2FRACR register *************/ +#define RCC_PLL2FRACR_FRACN_Pos (3U) +#define RCC_PLL2FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL2FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL2FRACR_FRACN RCC_PLL2FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL3DIVR1 register *************/ +#define RCC_PLL3DIVR1_DIVN_Pos (0U) +#define RCC_PLL3DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL3DIVR1_DIVN RCC_PLL3DIVR1_DIVN_Msk /*!< DIVN3[8:0] bits: PLL3 DIVN division factor */ +#define RCC_PLL3DIVR1_DIVN_0 (0x001UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR1_DIVN_1 (0x002UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR1_DIVN_2 (0x004UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL3DIVR1_DIVN_3 (0x008UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL3DIVR1_DIVN_4 (0x010UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL3DIVR1_DIVN_5 (0x020UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL3DIVR1_DIVN_6 (0x040UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL3DIVR1_DIVN_7 (0x080UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL3DIVR1_DIVN_8 (0x100UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL3DIVR1_DIVP_Pos (9U) +#define RCC_PLL3DIVR1_DIVP_Msk (0x7FUL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL3DIVR1_DIVP RCC_PLL3DIVR1_DIVP_Msk /*!< DIVP3[6:0] bits: PLL3 DIVP division factor */ +#define RCC_PLL3DIVR1_DIVP_0 (0x001UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL3DIVR1_DIVP_1 (0x002UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL3DIVR1_DIVP_2 (0x004UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL3DIVR1_DIVP_3 (0x008UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL3DIVR1_DIVP_4 (0x010UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL3DIVR1_DIVP_5 (0x020UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL3DIVR1_DIVP_6 (0x040UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL3DIVR1_DIVQ_Pos (16U) +#define RCC_PLL3DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL3DIVR1_DIVQ RCC_PLL3DIVR1_DIVQ_Msk /*!< DIVQ3[6:0] bits: PLL3 DIVQ division factor */ +#define RCC_PLL3DIVR1_DIVQ_0 (0x001UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL3DIVR1_DIVQ_1 (0x002UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL3DIVR1_DIVQ_2 (0x004UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL3DIVR1_DIVQ_3 (0x008UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL3DIVR1_DIVQ_4 (0x010UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL3DIVR1_DIVQ_5 (0x020UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL3DIVR1_DIVQ_6 (0x040UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL3DIVR1_DIVR_Pos (24U) +#define RCC_PLL3DIVR1_DIVR_Msk (0x7FUL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL3DIVR1_DIVR RCC_PLL3DIVR1_DIVR_Msk /*!< DIVR3[6:0] bits: PLL3 DIVR division factor */ +#define RCC_PLL3DIVR1_DIVR_0 (0x001UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL3DIVR1_DIVR_1 (0x002UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL3DIVR1_DIVR_2 (0x004UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL3DIVR1_DIVR_3 (0x008UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL3DIVR1_DIVR_4 (0x010UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL3DIVR1_DIVR_5 (0x020UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL3DIVR1_DIVR_6 (0x040UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3FRACR register *************/ +#define RCC_PLL3FRACR_FRACN_Pos (3U) +#define RCC_PLL3FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL3FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL3FRACR_FRACN RCC_PLL3FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_CCIPR1 register **************/ +#define RCC_CCIPR1_FMCSEL_Pos (0U) +#define RCC_CCIPR1_FMCSEL_Msk (0x3UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR1_FMCSEL RCC_CCIPR1_FMCSEL_Msk +#define RCC_CCIPR1_FMCSEL_0 (0x1UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR1_FMCSEL_1 (0x2UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR1_SDMMC12SEL_Pos (2U) +#define RCC_CCIPR1_SDMMC12SEL_Msk (0x1UL << RCC_CCIPR1_SDMMC12SEL_Pos) /*!< 0x00000004 */ +#define RCC_CCIPR1_SDMMC12SEL RCC_CCIPR1_SDMMC12SEL_Msk + +#define RCC_CCIPR1_XSPI1SEL_Pos (4U) +#define RCC_CCIPR1_XSPI1SEL_Msk (0x3UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000030 */ +#define RCC_CCIPR1_XSPI1SEL RCC_CCIPR1_XSPI1SEL_Msk +#define RCC_CCIPR1_XSPI1SEL_0 (0x1UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR1_XSPI1SEL_1 (0x2UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000020 */ + +#define RCC_CCIPR1_XSPI2SEL_Pos (6U) +#define RCC_CCIPR1_XSPI2SEL_Msk (0x3UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x000000C0 */ +#define RCC_CCIPR1_XSPI2SEL RCC_CCIPR1_XSPI2SEL_Msk +#define RCC_CCIPR1_XSPI2SEL_0 (0x1UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000040 */ +#define RCC_CCIPR1_XSPI2SEL_1 (0x2UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000080 */ + +#define RCC_CCIPR1_USBREFCKSEL_Pos (8U) +#define RCC_CCIPR1_USBREFCKSEL_Msk (0xFUL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000F00 */ +#define RCC_CCIPR1_USBREFCKSEL RCC_CCIPR1_USBREFCKSEL_Msk +#define RCC_CCIPR1_USBREFCKSEL_0 (0x1UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR1_USBREFCKSEL_1 (0x2UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR1_USBREFCKSEL_2 (0x4UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000400 */ +#define RCC_CCIPR1_USBREFCKSEL_3 (0x8UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000800 */ + +#define RCC_CCIPR1_USBPHYCSEL_Pos (12U) +#define RCC_CCIPR1_USBPHYCSEL_Msk (0x3UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR1_USBPHYCSEL RCC_CCIPR1_USBPHYCSEL_Msk +#define RCC_CCIPR1_USBPHYCSEL_0 (0x1UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR1_USBPHYCSEL_1 (0x2UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR1_OTGFSSEL_Pos (14U) +#define RCC_CCIPR1_OTGFSSEL_Msk (0x3UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CCIPR1_OTGFSSEL RCC_CCIPR1_OTGFSSEL_Msk +#define RCC_CCIPR1_OTGFSSEL_0 (0x1UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00004000 */ +#define RCC_CCIPR1_OTGFSSEL_1 (0x2UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00008000 */ + +#define RCC_CCIPR1_ETH1REFCKSEL_Pos (16U) +#define RCC_CCIPR1_ETH1REFCKSEL_Msk (0x3UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00030000 */ +#define RCC_CCIPR1_ETH1REFCKSEL RCC_CCIPR1_ETH1REFCKSEL_Msk +#define RCC_CCIPR1_ETH1REFCKSEL_0 (0x1UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR1_ETH1REFCKSEL_1 (0x2UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00020000 */ + +#define RCC_CCIPR1_ETH1PHYCKSEL_Pos (18U) +#define RCC_CCIPR1_ETH1PHYCKSEL_Msk (0x1UL << RCC_CCIPR1_ETH1PHYCKSEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR1_ETH1PHYCKSEL RCC_CCIPR1_ETH1PHYCKSEL_Msk + +#define RCC_CCIPR1_ADF1SEL_Pos (20U) +#define RCC_CCIPR1_ADF1SEL_Msk (0x7UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR1_ADF1SEL RCC_CCIPR1_ADF1SEL_Msk +#define RCC_CCIPR1_ADF1SEL_0 (0x1UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR1_ADF1SEL_1 (0x2UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR1_ADF1SEL_2 (0x4UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00400000 */ + +#define RCC_CCIPR1_ADCSEL_Pos (24U) +#define RCC_CCIPR1_ADCSEL_Msk (0x3UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR1_ADCSEL RCC_CCIPR1_ADCSEL_Msk +#define RCC_CCIPR1_ADCSEL_0 (0x1UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR1_ADCSEL_1 (0x2UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR1_PSSISEL_Pos (27U) +#define RCC_CCIPR1_PSSISEL_Msk (0x1UL << RCC_CCIPR1_PSSISEL_Pos) /*!< 0x08000000 */ +#define RCC_CCIPR1_PSSISEL RCC_CCIPR1_PSSISEL_Msk + +#define RCC_CCIPR1_CKPERSEL_Pos (28U) +#define RCC_CCIPR1_CKPERSEL_Msk (0x3UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR1_CKPERSEL RCC_CCIPR1_CKPERSEL_Msk +#define RCC_CCIPR1_CKPERSEL_0 (0x1UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR1_CKPERSEL_1 (0x2UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CCIPR2 register *************/ +#define RCC_CCIPR2_UART234578SEL_Pos (0U) +#define RCC_CCIPR2_UART234578SEL_Msk (0x7UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR2_UART234578SEL RCC_CCIPR2_UART234578SEL_Msk +#define RCC_CCIPR2_UART234578SEL_0 (0x1UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR2_UART234578SEL_1 (0x2UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR2_UART234578SEL_2 (0x4UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR2_SPI23SEL_Pos (4U) +#define RCC_CCIPR2_SPI23SEL_Msk (0x7UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR2_SPI23SEL RCC_CCIPR2_SPI23SEL_Msk +#define RCC_CCIPR2_SPI23SEL_0 (0x1UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR2_SPI23SEL_1 (0x2UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR2_SPI23SEL_2 (0x4UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR2_I2C23SEL_Pos (8U) +#define RCC_CCIPR2_I2C23SEL_Msk (0x3UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000300 */ +#define RCC_CCIPR2_I2C23SEL RCC_CCIPR2_I2C23SEL_Msk +#define RCC_CCIPR2_I2C23SEL_0 (0x1UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR2_I2C23SEL_1 (0x2UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000200 */ + +#define RCC_CCIPR2_I2C1_I3C1SEL_Pos (12U) +#define RCC_CCIPR2_I2C1_I3C1SEL_Msk (0x3UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL RCC_CCIPR2_I2C1_I3C1SEL_Msk +#define RCC_CCIPR2_I2C1_I3C1SEL_0 (0x1UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL_1 (0x2UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR2_LPTIM1SEL_Pos (16U) +#define RCC_CCIPR2_LPTIM1SEL_Msk (0x7UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR2_LPTIM1SEL RCC_CCIPR2_LPTIM1SEL_Msk +#define RCC_CCIPR2_LPTIM1SEL_0 (0x1UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR2_LPTIM1SEL_1 (0x2UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR2_LPTIM1SEL_2 (0x4UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR2_FDCANSEL_Pos (22U) +#define RCC_CCIPR2_FDCANSEL_Msk (0x3UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00C00000 */ +#define RCC_CCIPR2_FDCANSEL RCC_CCIPR2_FDCANSEL_Msk +#define RCC_CCIPR2_FDCANSEL_0 (0x1UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00400000 */ +#define RCC_CCIPR2_FDCANSEL_1 (0x2UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00800000 */ + +#define RCC_CCIPR2_SPDIFRXSEL_Pos (24U) +#define RCC_CCIPR2_SPDIFRXSEL_Msk (0x3UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_SPDIFRXSEL RCC_CCIPR2_SPDIFRXSEL_Msk +#define RCC_CCIPR2_SPDIFRXSEL_0 (0x1UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_SPDIFRXSEL_1 (0x2UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR2_CECSEL_Pos (28U) +#define RCC_CCIPR2_CECSEL_Msk (0x3UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_CECSEL RCC_CCIPR2_CECSEL_Msk +#define RCC_CCIPR2_CECSEL_0 (0x1UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_CECSEL_1 (0x2UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_CCIPR3 register *************/ +#define RCC_CCIPR3_USART1SEL_Pos (0U) +#define RCC_CCIPR3_USART1SEL_Msk (0x7UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR3_USART1SEL RCC_CCIPR3_USART1SEL_Msk +#define RCC_CCIPR3_USART1SEL_0 (0x1UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR3_USART1SEL_1 (0x2UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR3_USART1SEL_2 (0x4UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR3_SPI45SEL_Pos (4U) +#define RCC_CCIPR3_SPI45SEL_Msk (0x7UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR3_SPI45SEL RCC_CCIPR3_SPI45SEL_Msk +#define RCC_CCIPR3_SPI45SEL_0 (0x1UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR3_SPI45SEL_1 (0x2UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR3_SPI45SEL_2 (0x4UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR3_SPI1SEL_Pos (8U) +#define RCC_CCIPR3_SPI1SEL_Msk (0x7UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR3_SPI1SEL RCC_CCIPR3_SPI1SEL_Msk +#define RCC_CCIPR3_SPI1SEL_0 (0x1UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR3_SPI1SEL_1 (0x2UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR3_SPI1SEL_2 (0x4UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR3_SAI1SEL_Pos (16U) +#define RCC_CCIPR3_SAI1SEL_Msk (0x7UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR3_SAI1SEL RCC_CCIPR3_SAI1SEL_Msk +#define RCC_CCIPR3_SAI1SEL_0 (0x1UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR3_SAI1SEL_1 (0x2UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR3_SAI1SEL_2 (0x4UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR3_SAI2SEL_Pos (20U) +#define RCC_CCIPR3_SAI2SEL_Msk (0x7UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR3_SAI2SEL RCC_CCIPR3_SAI2SEL_Msk +#define RCC_CCIPR3_SAI2SEL_0 (0x1UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR3_SAI2SEL_1 (0x2UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR3_SAI2SEL_2 (0x4UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00400000 */ + +/******************** Bit definition for RCC_CCIPR4 register ************/ +#define RCC_CCIPR4_LPUART1SEL_Pos (0U) +#define RCC_CCIPR4_LPUART1SEL_Msk (0x7UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR4_LPUART1SEL RCC_CCIPR4_LPUART1SEL_Msk +#define RCC_CCIPR4_LPUART1SEL_0 (0x1UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR4_LPUART1SEL_1 (0x2UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR4_LPUART1SEL_2 (0x4UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR4_SPI6SEL_Pos (4U) +#define RCC_CCIPR4_SPI6SEL_Msk (0x7UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR4_SPI6SEL RCC_CCIPR4_SPI6SEL_Msk +#define RCC_CCIPR4_SPI6SEL_0 (0x1UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR4_SPI6SEL_1 (0x2UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR4_SPI6SEL_2 (0x4UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR4_LPTIM23SEL_Pos (8U) +#define RCC_CCIPR4_LPTIM23SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR4_LPTIM23SEL RCC_CCIPR4_LPTIM23SEL_Msk +#define RCC_CCIPR4_LPTIM23SEL_0 (0x1UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR4_LPTIM23SEL_1 (0x2UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR4_LPTIM23SEL_2 (0x4UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR4_LPTIM45SEL_Pos (12U) +#define RCC_CCIPR4_LPTIM45SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00007000 */ +#define RCC_CCIPR4_LPTIM45SEL RCC_CCIPR4_LPTIM45SEL_Msk +#define RCC_CCIPR4_LPTIM45SEL_0 (0x1UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR4_LPTIM45SEL_1 (0x2UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00002000 */ +#define RCC_CCIPR4_LPTIM45SEL_2 (0x4UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSIRDYIE_Pos (0U) +#define RCC_CIER_LSIRDYIE_Msk (0x1UL << RCC_CIER_LSIRDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (2U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (3U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_CSIRDYIE_Pos (4U) +#define RCC_CIER_CSIRDYIE_Msk (0x1UL << RCC_CIER_CSIRDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_CSIRDYIE RCC_CIER_CSIRDYIE_Msk +#define RCC_CIER_HSI48RDYIE_Pos (5U) +#define RCC_CIER_HSI48RDYIE_Msk (0x1UL << RCC_CIER_HSI48RDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE_Msk +#define RCC_CIER_PLL1RDYIE_Pos (6U) +#define RCC_CIER_PLL1RDYIE_Msk (0x1UL << RCC_CIER_PLL1RDYIE_Pos) /*!< 0x00000040 */ +#define RCC_CIER_PLL1RDYIE RCC_CIER_PLL1RDYIE_Msk +#define RCC_CIER_PLL2RDYIE_Pos (7U) +#define RCC_CIER_PLL2RDYIE_Msk (0x1UL << RCC_CIER_PLL2RDYIE_Pos) /*!< 0x00000080 */ +#define RCC_CIER_PLL2RDYIE RCC_CIER_PLL2RDYIE_Msk +#define RCC_CIER_PLL3RDYIE_Pos (8U) +#define RCC_CIER_PLL3RDYIE_Msk (0x1UL << RCC_CIER_PLL3RDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIER_PLL3RDYIE RCC_CIER_PLL3RDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSIRDYF_Pos (0U) +#define RCC_CIFR_LSIRDYF_Msk (0x1UL << RCC_CIFR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (2U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (3U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_CSIRDYF_Pos (4U) +#define RCC_CIFR_CSIRDYF_Msk (0x1UL << RCC_CIFR_CSIRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_CSIRDYF RCC_CIFR_CSIRDYF_Msk +#define RCC_CIFR_HSI48RDYF_Pos (5U) +#define RCC_CIFR_HSI48RDYF_Msk (0x1UL << RCC_CIFR_HSI48RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF_Msk +#define RCC_CIFR_PLL1RDYF_Pos (6U) +#define RCC_CIFR_PLL1RDYF_Msk (0x1UL << RCC_CIFR_PLL1RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIFR_PLL1RDYF RCC_CIFR_PLL1RDYF_Msk +#define RCC_CIFR_PLL2RDYF_Pos (7U) +#define RCC_CIFR_PLL2RDYF_Msk (0x1UL << RCC_CIFR_PLL2RDYF_Pos) /*!< 0x00000080 */ +#define RCC_CIFR_PLL2RDYF RCC_CIFR_PLL2RDYF_Msk +#define RCC_CIFR_PLL3RDYF_Pos (8U) +#define RCC_CIFR_PLL3RDYF_Msk (0x1UL << RCC_CIFR_PLL3RDYF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_PLL3RDYF RCC_CIFR_PLL3RDYF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_HSECSSF_Pos (10U) +#define RCC_CIFR_HSECSSF_Msk (0x1UL << RCC_CIFR_HSECSSF_Pos) /*!< 0x00000400 */ +#define RCC_CIFR_HSECSSF RCC_CIFR_HSECSSF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSIRDYC_Pos (0U) +#define RCC_CICR_LSIRDYC_Msk (0x1UL << RCC_CICR_LSIRDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (2U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (3U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_CSIRDYC_Pos (4U) +#define RCC_CICR_CSIRDYC_Msk (0x1UL << RCC_CICR_CSIRDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_CSIRDYC RCC_CICR_CSIRDYC_Msk +#define RCC_CICR_HSI48RDYC_Pos (5U) +#define RCC_CICR_HSI48RDYC_Msk (0x1UL << RCC_CICR_HSI48RDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC_Msk +#define RCC_CICR_PLL1RDYC_Pos (6U) +#define RCC_CICR_PLL1RDYC_Msk (0x1UL << RCC_CICR_PLL1RDYC_Pos) /*!< 0x00000040 */ +#define RCC_CICR_PLL1RDYC RCC_CICR_PLL1RDYC_Msk +#define RCC_CICR_PLL2RDYC_Pos (7U) +#define RCC_CICR_PLL2RDYC_Msk (0x1UL << RCC_CICR_PLL2RDYC_Pos) /*!< 0x00000080 */ +#define RCC_CICR_PLL2RDYC RCC_CICR_PLL2RDYC_Msk +#define RCC_CICR_PLL3RDYC_Pos (8U) +#define RCC_CICR_PLL3RDYC_Msk (0x1UL << RCC_CICR_PLL3RDYC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_PLL3RDYC RCC_CICR_PLL3RDYC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_HSECSSC_Pos (10U) +#define RCC_CICR_HSECSSC_Msk (0x1UL << RCC_CICR_HSECSSC_Pos) /*!< 0x00000400 */ +#define RCC_CICR_HSECSSC RCC_CICR_HSECSSC_Msk + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk +#define RCC_BDCR_LSEEXT_Pos (7U) +#define RCC_BDCR_LSEEXT_Msk (0x1UL << RCC_BDCR_LSEEXT_Pos) /*!< 0x00000080 */ +#define RCC_BDCR_LSEEXT RCC_BDCR_LSEEXT_Msk +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ +#define RCC_BDCR_LSECSSRA_Pos (12U) +#define RCC_BDCR_LSECSSRA_Msk (0x1UL << RCC_BDCR_LSECSSRA_Pos) /*!< 0x00001000 */ +#define RCC_BDCR_LSECSSRA RCC_BDCR_LSECSSRA_Msk + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk +#define RCC_BDCR_VSWRST_Pos (16U) +#define RCC_BDCR_VSWRST_Msk (0x1UL << RCC_BDCR_VSWRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_VSWRST RCC_BDCR_VSWRST_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_GPDMA1RST_Pos (4U) +#define RCC_AHB1RSTR_GPDMA1RST_Msk (0x1UL << RCC_AHB1RSTR_GPDMA1RST_Pos) /*!< 0x00000010 */ +#define RCC_AHB1RSTR_GPDMA1RST RCC_AHB1RSTR_GPDMA1RST_Msk +#define RCC_AHB1RSTR_ADC12RST_Pos (5U) +#define RCC_AHB1RSTR_ADC12RST_Msk (0x1UL << RCC_AHB1RSTR_ADC12RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB1RSTR_ADC12RST RCC_AHB1RSTR_ADC12RST_Msk +#define RCC_AHB1RSTR_ETH1RST_Pos (15U) +#define RCC_AHB1RSTR_ETH1RST_Msk (0x1UL << RCC_AHB1RSTR_ETH1RST_Pos) /*!< 0x00008000 */ +#define RCC_AHB1RSTR_ETH1RST RCC_AHB1RSTR_ETH1RST_Msk +#define RCC_AHB1RSTR_OTGHSRST_Pos (25U) +#define RCC_AHB1RSTR_OTGHSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGHSRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB1RSTR_OTGHSRST RCC_AHB1RSTR_OTGHSRST_Msk +#define RCC_AHB1RSTR_USBPHYCRST_Pos (26U) +#define RCC_AHB1RSTR_USBPHYCRST_Msk (0x1UL << RCC_AHB1RSTR_USBPHYCRST_Pos) /*!< 0x04000000 */ +#define RCC_AHB1RSTR_USBPHYCRST RCC_AHB1RSTR_USBPHYCRST_Msk +#define RCC_AHB1RSTR_OTGFSRST_Pos (27U) +#define RCC_AHB1RSTR_OTGFSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGFSRST_Pos) /*!< 0x08000000 */ +#define RCC_AHB1RSTR_OTGFSRST RCC_AHB1RSTR_OTGFSRST_Msk +#define RCC_AHB1RSTR_ADF1RST_Pos (31U) +#define RCC_AHB1RSTR_ADF1RST_Msk (0x1UL << RCC_AHB1RSTR_ADF1RST_Pos) /*!< 0x80000000 */ +#define RCC_AHB1RSTR_ADF1RST RCC_AHB1RSTR_ADF1RST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register **************/ +#define RCC_AHB2RSTR_PSSIRST_Pos (1U) +#define RCC_AHB2RSTR_PSSIRST_Msk (0x1UL << RCC_AHB2RSTR_PSSIRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_PSSIRST RCC_AHB2RSTR_PSSIRST_Msk +#define RCC_AHB2RSTR_SDMMC2RST_Pos (9U) +#define RCC_AHB2RSTR_SDMMC2RST_Msk (0x1UL << RCC_AHB2RSTR_SDMMC2RST_Pos) /*!< 0x00000200 */ +#define RCC_AHB2RSTR_SDMMC2RST RCC_AHB2RSTR_SDMMC2RST_Msk +#define RCC_AHB2RSTR_CORDICRST_Pos (14U) +#define RCC_AHB2RSTR_CORDICRST_Msk (0x1UL << RCC_AHB2RSTR_CORDICRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB2RSTR_CORDICRST RCC_AHB2RSTR_CORDICRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register **************/ +#define RCC_AHB3RSTR_RNGRST_Pos (0U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00000001 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HASHRST_Pos (1U) +#define RCC_AHB3RSTR_HASHRST_Msk (0x1UL << RCC_AHB3RSTR_HASHRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB3RSTR_HASHRST RCC_AHB3RSTR_HASHRST_Msk +#define RCC_AHB3RSTR_CRYPRST_Pos (2U) +#define RCC_AHB3RSTR_CRYPRST_Msk (0x1UL << RCC_AHB3RSTR_CRYPRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB3RSTR_CRYPRST RCC_AHB3RSTR_CRYPRST_Msk +#define RCC_AHB3RSTR_SAESRST_Pos (4U) +#define RCC_AHB3RSTR_SAESRST_Msk (0x1UL << RCC_AHB3RSTR_SAESRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB3RSTR_SAESRST RCC_AHB3RSTR_SAESRST_Msk +#define RCC_AHB3RSTR_PKARST_Pos (6U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00000040 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk + +/******************** Bit definition for RCC_AHB4RSTR register **************/ +#define RCC_AHB4RSTR_GPIOARST_Pos (0U) +#define RCC_AHB4RSTR_GPIOARST_Msk (0x1UL << RCC_AHB4RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB4RSTR_GPIOARST RCC_AHB4RSTR_GPIOARST_Msk +#define RCC_AHB4RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB4RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB4RSTR_GPIOBRST RCC_AHB4RSTR_GPIOBRST_Msk +#define RCC_AHB4RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB4RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB4RSTR_GPIOCRST RCC_AHB4RSTR_GPIOCRST_Msk +#define RCC_AHB4RSTR_GPIODRST_Pos (3U) +#define RCC_AHB4RSTR_GPIODRST_Msk (0x1UL << RCC_AHB4RSTR_GPIODRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB4RSTR_GPIODRST RCC_AHB4RSTR_GPIODRST_Msk +#define RCC_AHB4RSTR_GPIOERST_Pos (4U) +#define RCC_AHB4RSTR_GPIOERST_Msk (0x1UL << RCC_AHB4RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB4RSTR_GPIOERST RCC_AHB4RSTR_GPIOERST_Msk +#define RCC_AHB4RSTR_GPIOFRST_Pos (5U) +#define RCC_AHB4RSTR_GPIOFRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOFRST_Pos) /*!< 0x00000020 */ +#define RCC_AHB4RSTR_GPIOFRST RCC_AHB4RSTR_GPIOFRST_Msk +#define RCC_AHB4RSTR_GPIOGRST_Pos (6U) +#define RCC_AHB4RSTR_GPIOGRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOGRST_Pos) /*!< 0x00000040 */ +#define RCC_AHB4RSTR_GPIOGRST RCC_AHB4RSTR_GPIOGRST_Msk +#define RCC_AHB4RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB4RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB4RSTR_GPIOHRST RCC_AHB4RSTR_GPIOHRST_Msk +#define RCC_AHB4RSTR_GPIOMRST_Pos (12U) +#define RCC_AHB4RSTR_GPIOMRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOMRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB4RSTR_GPIOMRST RCC_AHB4RSTR_GPIOMRST_Msk +#define RCC_AHB4RSTR_GPIONRST_Pos (13U) +#define RCC_AHB4RSTR_GPIONRST_Msk (0x1UL << RCC_AHB4RSTR_GPIONRST_Pos) /*!< 0x00002000 */ +#define RCC_AHB4RSTR_GPIONRST RCC_AHB4RSTR_GPIONRST_Msk +#define RCC_AHB4RSTR_GPIOORST_Pos (14U) +#define RCC_AHB4RSTR_GPIOORST_Msk (0x1UL << RCC_AHB4RSTR_GPIOORST_Pos) /*!< 0x00004000 */ +#define RCC_AHB4RSTR_GPIOORST RCC_AHB4RSTR_GPIOORST_Msk +#define RCC_AHB4RSTR_GPIOPRST_Pos (15U) +#define RCC_AHB4RSTR_GPIOPRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOPRST_Pos) /*!< 0x00008000 */ +#define RCC_AHB4RSTR_GPIOPRST RCC_AHB4RSTR_GPIOPRST_Msk +#define RCC_AHB4RSTR_CRCRST_Pos (19U) +#define RCC_AHB4RSTR_CRCRST_Msk (0x1UL << RCC_AHB4RSTR_CRCRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB4RSTR_CRCRST RCC_AHB4RSTR_CRCRST_Msk + +/******************** Bit definition for RCC_AHB5RSTR register **************/ +#define RCC_AHB5RSTR_HPDMA1RST_Pos (0U) +#define RCC_AHB5RSTR_HPDMA1RST_Msk (0x1UL << RCC_AHB5RSTR_HPDMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB5RSTR_HPDMA1RST RCC_AHB5RSTR_HPDMA1RST_Msk +#define RCC_AHB5RSTR_DMA2DRST_Pos (1U) +#define RCC_AHB5RSTR_DMA2DRST_Msk (0x1UL << RCC_AHB5RSTR_DMA2DRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB5RSTR_DMA2DRST RCC_AHB5RSTR_DMA2DRST_Msk +#define RCC_AHB5RSTR_JPEGRST_Pos (3U) +#define RCC_AHB5RSTR_JPEGRST_Msk (0x1UL << RCC_AHB5RSTR_JPEGRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB5RSTR_JPEGRST RCC_AHB5RSTR_JPEGRST_Msk +#define RCC_AHB5RSTR_FMCRST_Pos (4U) +#define RCC_AHB5RSTR_FMCRST_Msk (0x1UL << RCC_AHB5RSTR_FMCRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB5RSTR_FMCRST RCC_AHB5RSTR_FMCRST_Msk +#define RCC_AHB5RSTR_XSPI1RST_Pos (5U) +#define RCC_AHB5RSTR_XSPI1RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI1RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB5RSTR_XSPI1RST RCC_AHB5RSTR_XSPI1RST_Msk +#define RCC_AHB5RSTR_SDMMC1RST_Pos (8U) +#define RCC_AHB5RSTR_SDMMC1RST_Msk (0x1UL << RCC_AHB5RSTR_SDMMC1RST_Pos) /*!< 0x00000100 */ +#define RCC_AHB5RSTR_SDMMC1RST RCC_AHB5RSTR_SDMMC1RST_Msk +#define RCC_AHB5RSTR_XSPI2RST_Pos (12U) +#define RCC_AHB5RSTR_XSPI2RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI2RST_Pos) /*!< 0x00001000 */ +#define RCC_AHB5RSTR_XSPI2RST RCC_AHB5RSTR_XSPI2RST_Msk +#define RCC_AHB5RSTR_XSPIMRST_Pos (14U) +#define RCC_AHB5RSTR_XSPIMRST_Msk (0x1UL << RCC_AHB5RSTR_XSPIMRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB5RSTR_XSPIMRST RCC_AHB5RSTR_XSPIMRST_Msk +#define RCC_AHB5RSTR_GFXMMURST_Pos (19U) +#define RCC_AHB5RSTR_GFXMMURST_Msk (0x1UL << RCC_AHB5RSTR_GFXMMURST_Pos) /*!< 0x00080000 */ +#define RCC_AHB5RSTR_GFXMMURST RCC_AHB5RSTR_GFXMMURST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register *************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_TIM3RST_Pos (1U) +#define RCC_APB1RSTR1_TIM3RST_Msk (0x1UL << RCC_APB1RSTR1_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR1_TIM3RST RCC_APB1RSTR1_TIM3RST_Msk +#define RCC_APB1RSTR1_TIM4RST_Pos (2U) +#define RCC_APB1RSTR1_TIM4RST_Msk (0x1UL << RCC_APB1RSTR1_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR1_TIM4RST RCC_APB1RSTR1_TIM4RST_Msk +#define RCC_APB1RSTR1_TIM5RST_Pos (3U) +#define RCC_APB1RSTR1_TIM5RST_Msk (0x1UL << RCC_APB1RSTR1_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR1_TIM5RST RCC_APB1RSTR1_TIM5RST_Msk +#define RCC_APB1RSTR1_TIM6RST_Pos (4U) +#define RCC_APB1RSTR1_TIM6RST_Msk (0x1UL << RCC_APB1RSTR1_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR1_TIM6RST RCC_APB1RSTR1_TIM6RST_Msk +#define RCC_APB1RSTR1_TIM7RST_Pos (5U) +#define RCC_APB1RSTR1_TIM7RST_Msk (0x1UL << RCC_APB1RSTR1_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR1_TIM7RST RCC_APB1RSTR1_TIM7RST_Msk +#define RCC_APB1RSTR1_TIM12RST_Pos (6U) +#define RCC_APB1RSTR1_TIM12RST_Msk (0x1UL << RCC_APB1RSTR1_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR1_TIM12RST RCC_APB1RSTR1_TIM12RST_Msk +#define RCC_APB1RSTR1_TIM13RST_Pos (7U) +#define RCC_APB1RSTR1_TIM13RST_Msk (0x1UL << RCC_APB1RSTR1_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR1_TIM13RST RCC_APB1RSTR1_TIM13RST_Msk +#define RCC_APB1RSTR1_TIM14RST_Pos (8U) +#define RCC_APB1RSTR1_TIM14RST_Msk (0x1UL << RCC_APB1RSTR1_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR1_TIM14RST RCC_APB1RSTR1_TIM14RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (9U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk +#define RCC_APB1RSTR1_SPI2RST_Pos (14U) +#define RCC_APB1RSTR1_SPI2RST_Msk (0x1UL << RCC_APB1RSTR1_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR1_SPI2RST RCC_APB1RSTR1_SPI2RST_Msk +#define RCC_APB1RSTR1_SPI3RST_Pos (15U) +#define RCC_APB1RSTR1_SPI3RST_Msk (0x1UL << RCC_APB1RSTR1_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR1_SPI3RST RCC_APB1RSTR1_SPI3RST_Msk +#define RCC_APB1RSTR1_SPDIFRXRST_Pos (16U) +#define RCC_APB1RSTR1_SPDIFRXRST_Msk (0x1UL << RCC_APB1RSTR1_SPDIFRXRST_Pos) /*!< 0x00010000 */ +#define RCC_APB1RSTR1_SPDIFRXRST RCC_APB1RSTR1_SPDIFRXRST_Msk +#define RCC_APB1RSTR1_USART2RST_Pos (17U) +#define RCC_APB1RSTR1_USART2RST_Msk (0x1UL << RCC_APB1RSTR1_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR1_USART2RST RCC_APB1RSTR1_USART2RST_Msk +#define RCC_APB1RSTR1_USART3RST_Pos (18U) +#define RCC_APB1RSTR1_USART3RST_Msk (0x1UL << RCC_APB1RSTR1_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR1_USART3RST RCC_APB1RSTR1_USART3RST_Msk +#define RCC_APB1RSTR1_UART4RST_Pos (19U) +#define RCC_APB1RSTR1_UART4RST_Msk (0x1UL << RCC_APB1RSTR1_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR1_UART4RST RCC_APB1RSTR1_UART4RST_Msk +#define RCC_APB1RSTR1_UART5RST_Pos (20U) +#define RCC_APB1RSTR1_UART5RST_Msk (0x1UL << RCC_APB1RSTR1_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR1_UART5RST RCC_APB1RSTR1_UART5RST_Msk +#define RCC_APB1RSTR1_I2C1_I3C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1_I3C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1_I3C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1_I3C1RST RCC_APB1RSTR1_I2C1_I3C1RST_Msk +#define RCC_APB1RSTR1_I2C2RST_Pos (22U) +#define RCC_APB1RSTR1_I2C2RST_Msk (0x1UL << RCC_APB1RSTR1_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR1_I2C2RST RCC_APB1RSTR1_I2C2RST_Msk +#define RCC_APB1RSTR1_I2C3RST_Pos (23U) +#define RCC_APB1RSTR1_I2C3RST_Msk (0x1UL << RCC_APB1RSTR1_I2C3RST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR1_I2C3RST RCC_APB1RSTR1_I2C3RST_Msk +#define RCC_APB1RSTR1_CECRST_Pos (27U) +#define RCC_APB1RSTR1_CECRST_Msk (0x1UL << RCC_APB1RSTR1_CECRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR1_CECRST RCC_APB1RSTR1_CECRST_Msk +#define RCC_APB1RSTR1_UART7RST_Pos (30U) +#define RCC_APB1RSTR1_UART7RST_Msk (0x1UL << RCC_APB1RSTR1_UART7RST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR1_UART7RST RCC_APB1RSTR1_UART7RST_Msk +#define RCC_APB1RSTR1_UART8RST_Pos (31U) +#define RCC_APB1RSTR1_UART8RST_Msk (0x1UL << RCC_APB1RSTR1_UART8RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_UART8RST RCC_APB1RSTR1_UART8RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register *************/ +#define RCC_APB1RSTR2_CRSRST_Pos (1U) +#define RCC_APB1RSTR2_CRSRST_Msk (0x1UL << RCC_APB1RSTR2_CRSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR2_CRSRST RCC_APB1RSTR2_CRSRST_Msk +#define RCC_APB1RSTR2_MDIOSRST_Pos (5U) +#define RCC_APB1RSTR2_MDIOSRST_Msk (0x1UL << RCC_APB1RSTR2_MDIOSRST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_MDIOSRST RCC_APB1RSTR2_MDIOSRST_Msk +#define RCC_APB1RSTR2_FDCANRST_Pos (8U) +#define RCC_APB1RSTR2_FDCANRST_Msk (0x1UL << RCC_APB1RSTR2_FDCANRST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR2_FDCANRST RCC_APB1RSTR2_FDCANRST_Msk +#define RCC_APB1RSTR2_UCPD1RST_Pos (27U) +#define RCC_APB1RSTR2_UCPD1RST_Msk (0x1UL << RCC_APB1RSTR2_UCPD1RST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR2_UCPD1RST RCC_APB1RSTR2_UCPD1RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_TIM1RST_Pos (0U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (4U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_SPI4RST_Pos (13U) +#define RCC_APB2RSTR_SPI4RST_Msk (0x1UL << RCC_APB2RSTR_SPI4RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_SPI4RST RCC_APB2RSTR_SPI4RST_Msk +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk +#define RCC_APB2RSTR_SPI5RST_Pos (20U) +#define RCC_APB2RSTR_SPI5RST_Msk (0x1UL << RCC_APB2RSTR_SPI5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_SPI5RST RCC_APB2RSTR_SPI5RST_Msk +#define RCC_APB2RSTR_SAI1RST_Pos (22U) +#define RCC_APB2RSTR_SAI1RST_Msk (0x1UL << RCC_APB2RSTR_SAI1RST_Pos) /*!< 0x00400000 */ +#define RCC_APB2RSTR_SAI1RST RCC_APB2RSTR_SAI1RST_Msk +#define RCC_APB2RSTR_SAI2RST_Pos (23U) +#define RCC_APB2RSTR_SAI2RST_Msk (0x1UL << RCC_APB2RSTR_SAI2RST_Pos) /*!< 0x00800000 */ +#define RCC_APB2RSTR_SAI2RST RCC_APB2RSTR_SAI2RST_Msk + +/******************** Bit definition for RCC_APB4RSTR register **************/ +#define RCC_APB4RSTR_SBSRST_Pos (1U) +#define RCC_APB4RSTR_SBSRST_Msk (0x1UL << RCC_APB4RSTR_SBSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB4RSTR_SBSRST RCC_APB4RSTR_SBSRST_Msk +#define RCC_APB4RSTR_LPUART1RST_Pos (3U) +#define RCC_APB4RSTR_LPUART1RST_Msk (0x1UL << RCC_APB4RSTR_LPUART1RST_Pos) /*!< 0x00000008 */ +#define RCC_APB4RSTR_LPUART1RST RCC_APB4RSTR_LPUART1RST_Msk +#define RCC_APB4RSTR_SPI6RST_Pos (5U) +#define RCC_APB4RSTR_SPI6RST_Msk (0x1UL << RCC_APB4RSTR_SPI6RST_Pos) /*!< 0x00000020 */ +#define RCC_APB4RSTR_SPI6RST RCC_APB4RSTR_SPI6RST_Msk +#define RCC_APB4RSTR_LPTIM2RST_Pos (9U) +#define RCC_APB4RSTR_LPTIM2RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM2RST_Pos) /*!< 0x00000200 */ +#define RCC_APB4RSTR_LPTIM2RST RCC_APB4RSTR_LPTIM2RST_Msk +#define RCC_APB4RSTR_LPTIM3RST_Pos (10U) +#define RCC_APB4RSTR_LPTIM3RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM3RST_Pos) /*!< 0x00000400 */ +#define RCC_APB4RSTR_LPTIM3RST RCC_APB4RSTR_LPTIM3RST_Msk +#define RCC_APB4RSTR_LPTIM4RST_Pos (11U) +#define RCC_APB4RSTR_LPTIM4RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM4RST_Pos) /*!< 0x00000800 */ +#define RCC_APB4RSTR_LPTIM4RST RCC_APB4RSTR_LPTIM4RST_Msk +#define RCC_APB4RSTR_LPTIM5RST_Pos (12U) +#define RCC_APB4RSTR_LPTIM5RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM5RST_Pos) /*!< 0x00001000 */ +#define RCC_APB4RSTR_LPTIM5RST RCC_APB4RSTR_LPTIM5RST_Msk +#define RCC_APB4RSTR_VREFRST_Pos (15U) +#define RCC_APB4RSTR_VREFRST_Msk (0x1UL << RCC_APB4RSTR_VREFRST_Pos) /*!< 0x00008000 */ +#define RCC_APB4RSTR_VREFRST RCC_APB4RSTR_VREFRST_Msk +#define RCC_APB4RSTR_DTSRST_Pos (26U) +#define RCC_APB4RSTR_DTSRST_Msk (0x1UL << RCC_APB4RSTR_DTSRST_Pos) /*!< 0x04000000 */ +#define RCC_APB4RSTR_DTSRST RCC_APB4RSTR_DTSRST_Msk + +/******************** Bit definition for RCC_APB5RSTR register **************/ +#define RCC_APB5RSTR_DCMIPPRST_Pos (2U) +#define RCC_APB5RSTR_DCMIPPRST_Msk (0x1UL << RCC_APB5RSTR_DCMIPPRST_Pos) /*!< 0x00000004 */ +#define RCC_APB5RSTR_DCMIPPRST RCC_APB5RSTR_DCMIPPRST_Msk +#define RCC_APB5RSTR_GFXTIMRST_Pos (4U) +#define RCC_APB5RSTR_GFXTIMRST_Msk (0x1UL << RCC_APB5RSTR_GFXTIMRST_Pos) /*!< 0x00000010 */ +#define RCC_APB5RSTR_GFXTIMRST RCC_APB5RSTR_GFXTIMRST_Msk + +/******************** Bit definition for RCC_CKGDISR register ***************/ +#define RCC_CKGDISR_AXICKG_Pos (0U) +#define RCC_CKGDISR_AXICKG_Msk (0x1UL << RCC_CKGDISR_AXICKG_Pos) /*!< 0x00000001 */ +#define RCC_CKGDISR_AXICKG RCC_CKGDISR_AXICKG_Msk +#define RCC_CKGDISR_AHBMCKG_Pos (1U) +#define RCC_CKGDISR_AHBMCKG_Msk (0x1UL << RCC_CKGDISR_AHBMCKG_Pos) /*!< 0x00000002 */ +#define RCC_CKGDISR_AHBMCKG RCC_CKGDISR_AHBMCKG_Msk +#define RCC_CKGDISR_SDMMC1CKG_Pos (2U) +#define RCC_CKGDISR_SDMMC1CKG_Msk (0x1UL << RCC_CKGDISR_SDMMC1CKG_Pos) /*!< 0x00000004 */ +#define RCC_CKGDISR_SDMMC1CKG RCC_CKGDISR_SDMMC1CKG_Msk +#define RCC_CKGDISR_HPDMA1CKG_Pos (3U) +#define RCC_CKGDISR_HPDMA1CKG_Msk (0x1UL << RCC_CKGDISR_HPDMA1CKG_Pos) /*!< 0x00000008 */ +#define RCC_CKGDISR_HPDMA1CKG RCC_CKGDISR_HPDMA1CKG_Msk +#define RCC_CKGDISR_CPUCKG_Pos (4U) +#define RCC_CKGDISR_CPUCKG_Msk (0x1UL << RCC_CKGDISR_CPUCKG_Pos) /*!< 0x00000010 */ +#define RCC_CKGDISR_CPUCKG RCC_CKGDISR_CPUCKG_Msk +#define RCC_CKGDISR_DCMIPPCKG_Pos (8U) +#define RCC_CKGDISR_DCMIPPCKG_Msk (0x1UL << RCC_CKGDISR_DCMIPPCKG_Pos) /*!< 0x00000100 */ +#define RCC_CKGDISR_DCMIPPCKG RCC_CKGDISR_DCMIPPCKG_Msk +#define RCC_CKGDISR_DMA2DCKG_Pos (9U) +#define RCC_CKGDISR_DMA2DCKG_Msk (0x1UL << RCC_CKGDISR_DMA2DCKG_Pos) /*!< 0x00000200 */ +#define RCC_CKGDISR_DMA2DCKG RCC_CKGDISR_DMA2DCKG_Msk +#define RCC_CKGDISR_GFXMMUSCKG_Pos (10U) +#define RCC_CKGDISR_GFXMMUSCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUSCKG_Pos) /*!< 0x00000400 */ +#define RCC_CKGDISR_GFXMMUSCKG RCC_CKGDISR_GFXMMUSCKG_Msk +#define RCC_CKGDISR_GFXMMUMCKG_Pos (12U) +#define RCC_CKGDISR_GFXMMUMCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUMCKG_Pos) /*!< 0x00001000 */ +#define RCC_CKGDISR_GFXMMUMCKG RCC_CKGDISR_GFXMMUMCKG_Msk +#define RCC_CKGDISR_AHBSCKG_Pos (13U) +#define RCC_CKGDISR_AHBSCKG_Msk (0x1UL << RCC_CKGDISR_AHBSCKG_Pos) /*!< 0x00002000 */ +#define RCC_CKGDISR_AHBSCKG RCC_CKGDISR_AHBSCKG_Msk +#define RCC_CKGDISR_FMCCKG_Pos (14U) +#define RCC_CKGDISR_FMCCKG_Msk (0x1UL << RCC_CKGDISR_FMCCKG_Pos) /*!< 0x00004000 */ +#define RCC_CKGDISR_FMCCKG RCC_CKGDISR_FMCCKG_Msk +#define RCC_CKGDISR_XSPI1CKG_Pos (15U) +#define RCC_CKGDISR_XSPI1CKG_Msk (0x1UL << RCC_CKGDISR_XSPI1CKG_Pos) /*!< 0x00008000 */ +#define RCC_CKGDISR_XSPI1CKG RCC_CKGDISR_XSPI1CKG_Msk +#define RCC_CKGDISR_XSPI2CKG_Pos (16U) +#define RCC_CKGDISR_XSPI2CKG_Msk (0x1UL << RCC_CKGDISR_XSPI2CKG_Pos) /*!< 0x00010000 */ +#define RCC_CKGDISR_XSPI2CKG RCC_CKGDISR_XSPI2CKG_Msk +#define RCC_CKGDISR_AXISRAM4CKG_Pos (17U) +#define RCC_CKGDISR_AXISRAM4CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM4CKG_Pos) /*!< 0x00020000 */ +#define RCC_CKGDISR_AXISRAM4CKG RCC_CKGDISR_AXISRAM4CKG_Msk +#define RCC_CKGDISR_AXISRAM3CKG_Pos (18U) +#define RCC_CKGDISR_AXISRAM3CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM3CKG_Pos) /*!< 0x00040000 */ +#define RCC_CKGDISR_AXISRAM3CKG RCC_CKGDISR_AXISRAM3CKG_Msk +#define RCC_CKGDISR_AXISRAM2CKG_Pos (19U) +#define RCC_CKGDISR_AXISRAM2CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM2CKG_Pos) /*!< 0x00080000 */ +#define RCC_CKGDISR_AXISRAM2CKG RCC_CKGDISR_AXISRAM2CKG_Msk +#define RCC_CKGDISR_AXISRAM1CKG_Pos (20U) +#define RCC_CKGDISR_AXISRAM1CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM1CKG_Pos) /*!< 0x00100000 */ +#define RCC_CKGDISR_AXISRAM1CKG RCC_CKGDISR_AXISRAM1CKG_Msk +#define RCC_CKGDISR_FLASHCKG_Pos (21U) +#define RCC_CKGDISR_FLASHCKG_Msk (0x1UL << RCC_CKGDISR_FLASHCKG_Pos) /*!< 0x00200000 */ +#define RCC_CKGDISR_FLASHCKG RCC_CKGDISR_FLASHCKG_Msk +#define RCC_CKGDISR_EXTICKG_Pos (30U) +#define RCC_CKGDISR_EXTICKG_Msk (0x1UL << RCC_CKGDISR_EXTICKG_Pos) /*!< 0x40000000 */ +#define RCC_CKGDISR_EXTICKG RCC_CKGDISR_EXTICKG_Msk +#define RCC_CKGDISR_JTAGCKG_Pos (31U) +#define RCC_CKGDISR_JTAGCKG_Msk (0x1UL << RCC_CKGDISR_JTAGCKG_Pos) /*!< 0x80000000 */ +#define RCC_CKGDISR_JTAGCKG RCC_CKGDISR_JTAGCKG_Msk + +/******************** Bit definition for RCC_PLL1DIVR2 register *************/ +#define RCC_PLL1DIVR2_DIVS_Pos (0U) +#define RCC_PLL1DIVR2_DIVS_Msk (0x7UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL1DIVR2_DIVS RCC_PLL1DIVR2_DIVS_Msk /*!< DIVS1[2:0] bits: PLL1 DIVS division factor */ +#define RCC_PLL1DIVR2_DIVS_0 (0x1UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR2_DIVS_1 (0x2UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR2_DIVS_2 (0x4UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL2DIVR2 register *************/ +#define RCC_PLL2DIVR2_DIVS_Pos (0U) +#define RCC_PLL2DIVR2_DIVS_Msk (0x7UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL2DIVR2_DIVS RCC_PLL2DIVR2_DIVS_Msk /*!< DIVS2[2:0] bits: PLL2 DIVS division factor */ +#define RCC_PLL2DIVR2_DIVS_0 (0x1UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR2_DIVS_1 (0x2UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR2_DIVS_2 (0x4UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +#define RCC_PLL2DIVR2_DIVT_Pos (8U) +#define RCC_PLL2DIVR2_DIVT_Msk (0x7UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000700 */ +#define RCC_PLL2DIVR2_DIVT RCC_PLL2DIVR2_DIVT_Msk /*!< DIVT2[2:0] bits: PLL2 DIVT division factor */ +#define RCC_PLL2DIVR2_DIVT_0 (0x1UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000100 */ +#define RCC_PLL2DIVR2_DIVT_1 (0x2UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR2_DIVT_2 (0x4UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for RCC_PLL3DIVR2 register *************/ +#define RCC_PLL3DIVR2_DIVS_Pos (0U) +#define RCC_PLL3DIVR2_DIVS_Msk (0x7UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL3DIVR2_DIVS RCC_PLL3DIVR2_DIVS_Msk /*!< DIVS3[2:0] bits: PLL3 DIVS division factor */ +#define RCC_PLL3DIVR2_DIVS_0 (0x1UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR2_DIVS_1 (0x2UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR2_DIVS_2 (0x4UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL1SSCGR register *************/ +#define RCC_PLL1SSCGR_MODPER_Pos (0U) +#define RCC_PLL1SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL1SSCGR_MODPER RCC_PLL1SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL1SSCGR_MODPER_0 (0x0001UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL1SSCGR_MODPER_1 (0x0002UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL1SSCGR_MODPER_2 (0x0004UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL1SSCGR_MODPER_3 (0x0008UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL1SSCGR_MODPER_4 (0x0010UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL1SSCGR_MODPER_5 (0x0020UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL1SSCGR_MODPER_6 (0x0040UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL1SSCGR_MODPER_7 (0x0080UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL1SSCGR_MODPER_8 (0x0100UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL1SSCGR_MODPER_9 (0x0200UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL1SSCGR_MODPER_10 (0x0400UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL1SSCGR_MODPER_11 (0x0800UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL1SSCGR_MODPER_12 (0x1000UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL1SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL1SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL1SSCGR_TPDFNDIS RCC_PLL1SSCGR_TPDFNDIS_Msk +#define RCC_PLL1SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL1SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL1SSCGR_RPDFNDIS RCC_PLL1SSCGR_RPDFNDIS_Msk +#define RCC_PLL1SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL1SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL1SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL1SSCGR_SPREADSEL RCC_PLL1SSCGR_SPREADSEL_Msk +#define RCC_PLL1SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL1SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL1SSCGR_INCSTEP RCC_PLL1SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL1SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL1SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL1SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL1SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL1SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL1SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL1SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL1SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL1SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL1SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL1SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL1SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL1SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL1SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL1SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2SSCGR register *************/ +#define RCC_PLL2SSCGR_MODPER_Pos (0U) +#define RCC_PLL2SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL2SSCGR_MODPER RCC_PLL2SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL2SSCGR_MODPER_0 (0x0001UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL2SSCGR_MODPER_1 (0x0002UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL2SSCGR_MODPER_2 (0x0004UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL2SSCGR_MODPER_3 (0x0008UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL2SSCGR_MODPER_4 (0x0010UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL2SSCGR_MODPER_5 (0x0020UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL2SSCGR_MODPER_6 (0x0040UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL2SSCGR_MODPER_7 (0x0080UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL2SSCGR_MODPER_8 (0x0100UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL2SSCGR_MODPER_9 (0x0200UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL2SSCGR_MODPER_10 (0x0400UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL2SSCGR_MODPER_11 (0x0800UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL2SSCGR_MODPER_12 (0x1000UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL2SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL2SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL2SSCGR_TPDFNDIS RCC_PLL2SSCGR_TPDFNDIS_Msk +#define RCC_PLL2SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL2SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL2SSCGR_RPDFNDIS RCC_PLL2SSCGR_RPDFNDIS_Msk +#define RCC_PLL2SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL2SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL2SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL2SSCGR_SPREADSEL RCC_PLL2SSCGR_SPREADSEL_Msk +#define RCC_PLL2SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL2SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL2SSCGR_INCSTEP RCC_PLL2SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL2SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL2SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL2SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL2SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL2SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL2SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL2SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL2SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL2SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL2SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL2SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL2SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL2SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL2SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL2SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3SSCGR register *************/ +#define RCC_PLL3SSCGR_MODPER_Pos (0U) +#define RCC_PLL3SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL3SSCGR_MODPER RCC_PLL3SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL3SSCGR_MODPER_0 (0x0001UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL3SSCGR_MODPER_1 (0x0002UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL3SSCGR_MODPER_2 (0x0004UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL3SSCGR_MODPER_3 (0x0008UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL3SSCGR_MODPER_4 (0x0010UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL3SSCGR_MODPER_5 (0x0020UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL3SSCGR_MODPER_6 (0x0040UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL3SSCGR_MODPER_7 (0x0080UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL3SSCGR_MODPER_8 (0x0100UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL3SSCGR_MODPER_9 (0x0200UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL3SSCGR_MODPER_10 (0x0400UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL3SSCGR_MODPER_11 (0x0800UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL3SSCGR_MODPER_12 (0x1000UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL3SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL3SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL3SSCGR_TPDFNDIS RCC_PLL3SSCGR_TPDFNDIS_Msk +#define RCC_PLL3SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL3SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL3SSCGR_RPDFNDIS RCC_PLL3SSCGR_RPDFNDIS_Msk +#define RCC_PLL3SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL3SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL3SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL3SSCGR_SPREADSEL RCC_PLL3SSCGR_SPREADSEL_Msk +#define RCC_PLL3SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL3SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL3SSCGR_INCSTEP RCC_PLL3SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL3SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL3SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL3SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL3SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL3SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL3SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL3SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL3SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL3SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL3SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL3SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL3SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL3SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL3SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL3SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CKPROTR register ***************/ +#define RCC_CKPROTR_XSPICKP_Pos (0U) +#define RCC_CKPROTR_XSPICKP_Msk (0x1UL << RCC_CKPROTR_XSPICKP_Pos) /*!< 0x00000001 */ +#define RCC_CKPROTR_XSPICKP RCC_CKPROTR_XSPICKP_Msk +#define RCC_CKPROTR_FMCCKP_Pos (1U) +#define RCC_CKPROTR_FMCCKP_Msk (0x1UL << RCC_CKPROTR_FMCCKP_Pos) /*!< 0x00000002 */ +#define RCC_CKPROTR_FMCCKP RCC_CKPROTR_FMCCKP_Msk +#define RCC_CKPROTR_XSPI1SWP_Pos (4U) +#define RCC_CKPROTR_XSPI1SWP_Msk (0x7UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000070 */ +#define RCC_CKPROTR_XSPI1SWP RCC_CKPROTR_XSPI1SWP_Msk +#define RCC_CKPROTR_XSPI1SWP_0 (0x1UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000010 */ +#define RCC_CKPROTR_XSPI1SWP_1 (0x2UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000020 */ +#define RCC_CKPROTR_XSPI1SWP_2 (0x4UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000040 */ +#define RCC_CKPROTR_XSPI2SWP_Pos (8U) +#define RCC_CKPROTR_XSPI2SWP_Msk (0x7UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000700 */ +#define RCC_CKPROTR_XSPI2SWP RCC_CKPROTR_XSPI2SWP_Msk +#define RCC_CKPROTR_XSPI2SWP_0 (0x1UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000100 */ +#define RCC_CKPROTR_XSPI2SWP_1 (0x2UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000200 */ +#define RCC_CKPROTR_XSPI2SWP_2 (0x4UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000400 */ +#define RCC_CKPROTR_FMCSWP_Pos (12U) +#define RCC_CKPROTR_FMCSWP_Msk (0x7UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00007000 */ +#define RCC_CKPROTR_FMCSWP RCC_CKPROTR_FMCSWP_Msk +#define RCC_CKPROTR_FMCSWP_0 (0x1UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00001000 */ +#define RCC_CKPROTR_FMCSWP_1 (0x2UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00002000 */ +#define RCC_CKPROTR_FMCSWP_2 (0x4UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_RSR register *******************/ +#define RCC_RSR_RMVF_Pos (16U) +#define RCC_RSR_RMVF_Msk (0x1UL << RCC_RSR_RMVF_Pos) /*!< 0x00010000 */ +#define RCC_RSR_RMVF RCC_RSR_RMVF_Msk +#define RCC_RSR_OBLRSTF_Pos (17U) +#define RCC_RSR_OBLRSTF_Msk (0x1UL << RCC_RSR_OBLRSTF_Pos) /*!< 0x00020000 */ +#define RCC_RSR_OBLRSTF RCC_RSR_OBLRSTF_Msk +#define RCC_RSR_BORRSTF_Pos (21U) +#define RCC_RSR_BORRSTF_Msk (0x1UL << RCC_RSR_BORRSTF_Pos) /*!< 0x00200000 */ +#define RCC_RSR_BORRSTF RCC_RSR_BORRSTF_Msk +#define RCC_RSR_PINRSTF_Pos (22U) +#define RCC_RSR_PINRSTF_Msk (0x1UL << RCC_RSR_PINRSTF_Pos) /*!< 0x00400000 */ +#define RCC_RSR_PINRSTF RCC_RSR_PINRSTF_Msk +#define RCC_RSR_PORRSTF_Pos (23U) +#define RCC_RSR_PORRSTF_Msk (0x1UL << RCC_RSR_PORRSTF_Pos) /*!< 0x00800000 */ +#define RCC_RSR_PORRSTF RCC_RSR_PORRSTF_Msk +#define RCC_RSR_SFTRSTF_Pos (24U) +#define RCC_RSR_SFTRSTF_Msk (0x1UL << RCC_RSR_SFTRSTF_Pos) /*!< 0x01000000 */ +#define RCC_RSR_SFTRSTF RCC_RSR_SFTRSTF_Msk +#define RCC_RSR_IWDGRSTF_Pos (26U) +#define RCC_RSR_IWDGRSTF_Msk (0x1UL << RCC_RSR_IWDGRSTF_Pos) /*!< 0x04000000 */ +#define RCC_RSR_IWDGRSTF RCC_RSR_IWDGRSTF_Msk +#define RCC_RSR_WWDGRSTF_Pos (28U) +#define RCC_RSR_WWDGRSTF_Msk (0x1UL << RCC_RSR_WWDGRSTF_Pos) /*!< 0x10000000 */ +#define RCC_RSR_WWDGRSTF RCC_RSR_WWDGRSTF_Msk +#define RCC_RSR_LPWRRSTF_Pos (30U) +#define RCC_RSR_LPWRRSTF_Msk (0x1UL << RCC_RSR_LPWRRSTF_Pos) /*!< 0x40000000 */ +#define RCC_RSR_LPWRRSTF RCC_RSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_AHB1ENR register ***************/ +#define RCC_AHB1ENR_GPDMA1EN_Pos (4U) +#define RCC_AHB1ENR_GPDMA1EN_Msk (0x1UL << RCC_AHB1ENR_GPDMA1EN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1ENR_GPDMA1EN RCC_AHB1ENR_GPDMA1EN_Msk +#define RCC_AHB1ENR_ADC12EN_Pos (5U) +#define RCC_AHB1ENR_ADC12EN_Msk (0x1UL << RCC_AHB1ENR_ADC12EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1ENR_ADC12EN RCC_AHB1ENR_ADC12EN_Msk +#define RCC_AHB1ENR_ETH1MACEN_Pos (15U) +#define RCC_AHB1ENR_ETH1MACEN_Msk (0x1UL << RCC_AHB1ENR_ETH1MACEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1ENR_ETH1MACEN RCC_AHB1ENR_ETH1MACEN_Msk +#define RCC_AHB1ENR_ETH1TXEN_Pos (16U) +#define RCC_AHB1ENR_ETH1TXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1TXEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_ETH1TXEN RCC_AHB1ENR_ETH1TXEN_Msk +#define RCC_AHB1ENR_ETH1RXEN_Pos (17U) +#define RCC_AHB1ENR_ETH1RXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1RXEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1ENR_ETH1RXEN RCC_AHB1ENR_ETH1RXEN_Msk +#define RCC_AHB1ENR_OTGHSEN_Pos (25U) +#define RCC_AHB1ENR_OTGHSEN_Msk (0x1UL << RCC_AHB1ENR_OTGHSEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1ENR_OTGHSEN RCC_AHB1ENR_OTGHSEN_Msk +#define RCC_AHB1ENR_USBPHYCEN_Pos (26U) +#define RCC_AHB1ENR_USBPHYCEN_Msk (0x1UL << RCC_AHB1ENR_USBPHYCEN_Pos) /*!< 0x04000000 */ +#define RCC_AHB1ENR_USBPHYCEN RCC_AHB1ENR_USBPHYCEN_Msk +#define RCC_AHB1ENR_OTGFSEN_Pos (27U) +#define RCC_AHB1ENR_OTGFSEN_Msk (0x1UL << RCC_AHB1ENR_OTGFSEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1ENR_OTGFSEN RCC_AHB1ENR_OTGFSEN_Msk +#define RCC_AHB1ENR_ADF1EN_Pos (31U) +#define RCC_AHB1ENR_ADF1EN_Msk (0x1UL << RCC_AHB1ENR_ADF1EN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1ENR_ADF1EN RCC_AHB1ENR_ADF1EN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_PSSIEN_Pos (1U) +#define RCC_AHB2ENR_PSSIEN_Msk (0x1UL << RCC_AHB2ENR_PSSIEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_PSSIEN RCC_AHB2ENR_PSSIEN_Msk +#define RCC_AHB2ENR_SDMMC2EN_Pos (9U) +#define RCC_AHB2ENR_SDMMC2EN_Msk (0x1UL << RCC_AHB2ENR_SDMMC2EN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2ENR_SDMMC2EN RCC_AHB2ENR_SDMMC2EN_Msk +#define RCC_AHB2ENR_CORDICEN_Pos (14U) +#define RCC_AHB2ENR_CORDICEN_Msk (0x1UL << RCC_AHB2ENR_CORDICEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2ENR_CORDICEN RCC_AHB2ENR_CORDICEN_Msk +#define RCC_AHB2ENR_SRAM1EN_Pos (29U) +#define RCC_AHB2ENR_SRAM1EN_Msk (0x1UL << RCC_AHB2ENR_SRAM1EN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2ENR_SRAM1EN RCC_AHB2ENR_SRAM1EN_Msk +#define RCC_AHB2ENR_SRAM2EN_Pos (30U) +#define RCC_AHB2ENR_SRAM2EN_Msk (0x1UL << RCC_AHB2ENR_SRAM2EN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2ENR_SRAM2EN RCC_AHB2ENR_SRAM2EN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_RNGEN_Pos (0U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HASHEN_Pos (1U) +#define RCC_AHB3ENR_HASHEN_Msk (0x1UL << RCC_AHB3ENR_HASHEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3ENR_HASHEN RCC_AHB3ENR_HASHEN_Msk +#define RCC_AHB3ENR_CRYPEN_Pos (2U) +#define RCC_AHB3ENR_CRYPEN_Msk (0x1UL << RCC_AHB3ENR_CRYPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB3ENR_CRYPEN RCC_AHB3ENR_CRYPEN_Msk +#define RCC_AHB3ENR_SAESEN_Pos (4U) +#define RCC_AHB3ENR_SAESEN_Msk (0x1UL << RCC_AHB3ENR_SAESEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB3ENR_SAESEN RCC_AHB3ENR_SAESEN_Msk +#define RCC_AHB3ENR_PKAEN_Pos (6U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk + +/******************** Bit definition for RCC_AHB4ENR register ***************/ +#define RCC_AHB4ENR_GPIOAEN_Pos (0U) +#define RCC_AHB4ENR_GPIOAEN_Msk (0x1UL << RCC_AHB4ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4ENR_GPIOAEN RCC_AHB4ENR_GPIOAEN_Msk +#define RCC_AHB4ENR_GPIOBEN_Pos (1U) +#define RCC_AHB4ENR_GPIOBEN_Msk (0x1UL << RCC_AHB4ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4ENR_GPIOBEN RCC_AHB4ENR_GPIOBEN_Msk +#define RCC_AHB4ENR_GPIOCEN_Pos (2U) +#define RCC_AHB4ENR_GPIOCEN_Msk (0x1UL << RCC_AHB4ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4ENR_GPIOCEN RCC_AHB4ENR_GPIOCEN_Msk +#define RCC_AHB4ENR_GPIODEN_Pos (3U) +#define RCC_AHB4ENR_GPIODEN_Msk (0x1UL << RCC_AHB4ENR_GPIODEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4ENR_GPIODEN RCC_AHB4ENR_GPIODEN_Msk +#define RCC_AHB4ENR_GPIOEEN_Pos (4U) +#define RCC_AHB4ENR_GPIOEEN_Msk (0x1UL << RCC_AHB4ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4ENR_GPIOEEN RCC_AHB4ENR_GPIOEEN_Msk +#define RCC_AHB4ENR_GPIOFEN_Pos (5U) +#define RCC_AHB4ENR_GPIOFEN_Msk (0x1UL << RCC_AHB4ENR_GPIOFEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4ENR_GPIOFEN RCC_AHB4ENR_GPIOFEN_Msk +#define RCC_AHB4ENR_GPIOGEN_Pos (6U) +#define RCC_AHB4ENR_GPIOGEN_Msk (0x1UL << RCC_AHB4ENR_GPIOGEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4ENR_GPIOGEN RCC_AHB4ENR_GPIOGEN_Msk +#define RCC_AHB4ENR_GPIOHEN_Pos (7U) +#define RCC_AHB4ENR_GPIOHEN_Msk (0x1UL << RCC_AHB4ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4ENR_GPIOHEN RCC_AHB4ENR_GPIOHEN_Msk +#define RCC_AHB4ENR_GPIOMEN_Pos (12U) +#define RCC_AHB4ENR_GPIOMEN_Msk (0x1UL << RCC_AHB4ENR_GPIOMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4ENR_GPIOMEN RCC_AHB4ENR_GPIOMEN_Msk +#define RCC_AHB4ENR_GPIONEN_Pos (13U) +#define RCC_AHB4ENR_GPIONEN_Msk (0x1UL << RCC_AHB4ENR_GPIONEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4ENR_GPIONEN RCC_AHB4ENR_GPIONEN_Msk +#define RCC_AHB4ENR_GPIOOEN_Pos (14U) +#define RCC_AHB4ENR_GPIOOEN_Msk (0x1UL << RCC_AHB4ENR_GPIOOEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4ENR_GPIOOEN RCC_AHB4ENR_GPIOOEN_Msk +#define RCC_AHB4ENR_GPIOPEN_Pos (15U) +#define RCC_AHB4ENR_GPIOPEN_Msk (0x1UL << RCC_AHB4ENR_GPIOPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4ENR_GPIOPEN RCC_AHB4ENR_GPIOPEN_Msk +#define RCC_AHB4ENR_CRCEN_Pos (19U) +#define RCC_AHB4ENR_CRCEN_Msk (0x1UL << RCC_AHB4ENR_CRCEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4ENR_CRCEN RCC_AHB4ENR_CRCEN_Msk +#define RCC_AHB4ENR_BKPRAMEN_Pos (28U) +#define RCC_AHB4ENR_BKPRAMEN_Msk (0x1UL << RCC_AHB4ENR_BKPRAMEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4ENR_BKPRAMEN RCC_AHB4ENR_BKPRAMEN_Msk + +/******************** Bit definition for RCC_AHB5ENR register ***************/ +#define RCC_AHB5ENR_HPDMA1EN_Pos (0U) +#define RCC_AHB5ENR_HPDMA1EN_Msk (0x1UL << RCC_AHB5ENR_HPDMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5ENR_HPDMA1EN RCC_AHB5ENR_HPDMA1EN_Msk +#define RCC_AHB5ENR_DMA2DEN_Pos (1U) +#define RCC_AHB5ENR_DMA2DEN_Msk (0x1UL << RCC_AHB5ENR_DMA2DEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5ENR_DMA2DEN RCC_AHB5ENR_DMA2DEN_Msk +#define RCC_AHB5ENR_JPEGEN_Pos (3U) +#define RCC_AHB5ENR_JPEGEN_Msk (0x1UL << RCC_AHB5ENR_JPEGEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5ENR_JPEGEN RCC_AHB5ENR_JPEGEN_Msk +#define RCC_AHB5ENR_FMCEN_Pos (4U) +#define RCC_AHB5ENR_FMCEN_Msk (0x1UL << RCC_AHB5ENR_FMCEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5ENR_FMCEN RCC_AHB5ENR_FMCEN_Msk +#define RCC_AHB5ENR_XSPI1EN_Pos (5U) +#define RCC_AHB5ENR_XSPI1EN_Msk (0x1UL << RCC_AHB5ENR_XSPI1EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5ENR_XSPI1EN RCC_AHB5ENR_XSPI1EN_Msk +#define RCC_AHB5ENR_SDMMC1EN_Pos (8U) +#define RCC_AHB5ENR_SDMMC1EN_Msk (0x1UL << RCC_AHB5ENR_SDMMC1EN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5ENR_SDMMC1EN RCC_AHB5ENR_SDMMC1EN_Msk +#define RCC_AHB5ENR_XSPI2EN_Pos (12U) +#define RCC_AHB5ENR_XSPI2EN_Msk (0x1UL << RCC_AHB5ENR_XSPI2EN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5ENR_XSPI2EN RCC_AHB5ENR_XSPI2EN_Msk +#define RCC_AHB5ENR_XSPIMEN_Pos (14U) +#define RCC_AHB5ENR_XSPIMEN_Msk (0x1UL << RCC_AHB5ENR_XSPIMEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5ENR_XSPIMEN RCC_AHB5ENR_XSPIMEN_Msk +#define RCC_AHB5ENR_GFXMMUEN_Pos (19U) +#define RCC_AHB5ENR_GFXMMUEN_Msk (0x1UL << RCC_AHB5ENR_GFXMMUEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5ENR_GFXMMUEN RCC_AHB5ENR_GFXMMUEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_TIM3EN_Pos (1U) +#define RCC_APB1ENR1_TIM3EN_Msk (0x1UL << RCC_APB1ENR1_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR1_TIM3EN RCC_APB1ENR1_TIM3EN_Msk +#define RCC_APB1ENR1_TIM4EN_Pos (2U) +#define RCC_APB1ENR1_TIM4EN_Msk (0x1UL << RCC_APB1ENR1_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR1_TIM4EN RCC_APB1ENR1_TIM4EN_Msk +#define RCC_APB1ENR1_TIM5EN_Pos (3U) +#define RCC_APB1ENR1_TIM5EN_Msk (0x1UL << RCC_APB1ENR1_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR1_TIM5EN RCC_APB1ENR1_TIM5EN_Msk +#define RCC_APB1ENR1_TIM6EN_Pos (4U) +#define RCC_APB1ENR1_TIM6EN_Msk (0x1UL << RCC_APB1ENR1_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR1_TIM6EN RCC_APB1ENR1_TIM6EN_Msk +#define RCC_APB1ENR1_TIM7EN_Pos (5U) +#define RCC_APB1ENR1_TIM7EN_Msk (0x1UL << RCC_APB1ENR1_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR1_TIM7EN RCC_APB1ENR1_TIM7EN_Msk +#define RCC_APB1ENR1_TIM12EN_Pos (6U) +#define RCC_APB1ENR1_TIM12EN_Msk (0x1UL << RCC_APB1ENR1_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR1_TIM12EN RCC_APB1ENR1_TIM12EN_Msk +#define RCC_APB1ENR1_TIM13EN_Pos (7U) +#define RCC_APB1ENR1_TIM13EN_Msk (0x1UL << RCC_APB1ENR1_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR1_TIM13EN RCC_APB1ENR1_TIM13EN_Msk +#define RCC_APB1ENR1_TIM14EN_Pos (8U) +#define RCC_APB1ENR1_TIM14EN_Msk (0x1UL << RCC_APB1ENR1_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR1_TIM14EN RCC_APB1ENR1_TIM14EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (9U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_SPI2EN_Pos (14U) +#define RCC_APB1ENR1_SPI2EN_Msk (0x1UL << RCC_APB1ENR1_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR1_SPI2EN RCC_APB1ENR1_SPI2EN_Msk +#define RCC_APB1ENR1_SPI3EN_Pos (15U) +#define RCC_APB1ENR1_SPI3EN_Msk (0x1UL << RCC_APB1ENR1_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR1_SPI3EN RCC_APB1ENR1_SPI3EN_Msk +#define RCC_APB1ENR1_SPDIFRXEN_Pos (16U) +#define RCC_APB1ENR1_SPDIFRXEN_Msk (0x1UL << RCC_APB1ENR1_SPDIFRXEN_Pos) /*!< 0x00010000 */ +#define RCC_APB1ENR1_SPDIFRXEN RCC_APB1ENR1_SPDIFRXEN_Msk +#define RCC_APB1ENR1_USART2EN_Pos (17U) +#define RCC_APB1ENR1_USART2EN_Msk (0x1UL << RCC_APB1ENR1_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR1_USART2EN RCC_APB1ENR1_USART2EN_Msk +#define RCC_APB1ENR1_USART3EN_Pos (18U) +#define RCC_APB1ENR1_USART3EN_Msk (0x1UL << RCC_APB1ENR1_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR1_USART3EN RCC_APB1ENR1_USART3EN_Msk +#define RCC_APB1ENR1_UART4EN_Pos (19U) +#define RCC_APB1ENR1_UART4EN_Msk (0x1UL << RCC_APB1ENR1_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR1_UART4EN RCC_APB1ENR1_UART4EN_Msk +#define RCC_APB1ENR1_UART5EN_Pos (20U) +#define RCC_APB1ENR1_UART5EN_Msk (0x1UL << RCC_APB1ENR1_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR1_UART5EN RCC_APB1ENR1_UART5EN_Msk +#define RCC_APB1ENR1_I2C1_I3C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1_I3C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1_I3C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1_I3C1EN RCC_APB1ENR1_I2C1_I3C1EN_Msk +#define RCC_APB1ENR1_I2C2EN_Pos (22U) +#define RCC_APB1ENR1_I2C2EN_Msk (0x1UL << RCC_APB1ENR1_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR1_I2C2EN RCC_APB1ENR1_I2C2EN_Msk +#define RCC_APB1ENR1_I2C3EN_Pos (23U) +#define RCC_APB1ENR1_I2C3EN_Msk (0x1UL << RCC_APB1ENR1_I2C3EN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR1_I2C3EN RCC_APB1ENR1_I2C3EN_Msk +#define RCC_APB1ENR1_CECEN_Pos (27U) +#define RCC_APB1ENR1_CECEN_Msk (0x1UL << RCC_APB1ENR1_CECEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR1_CECEN RCC_APB1ENR1_CECEN_Msk +#define RCC_APB1ENR1_UART7EN_Pos (30U) +#define RCC_APB1ENR1_UART7EN_Msk (0x1UL << RCC_APB1ENR1_UART7EN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR1_UART7EN RCC_APB1ENR1_UART7EN_Msk +#define RCC_APB1ENR1_UART8EN_Pos (31U) +#define RCC_APB1ENR1_UART8EN_Msk (0x1UL << RCC_APB1ENR1_UART8EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_UART8EN RCC_APB1ENR1_UART8EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_CRSEN_Pos (1U) +#define RCC_APB1ENR2_CRSEN_Msk (0x1UL << RCC_APB1ENR2_CRSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR2_CRSEN RCC_APB1ENR2_CRSEN_Msk +#define RCC_APB1ENR2_MDIOSEN_Pos (5U) +#define RCC_APB1ENR2_MDIOSEN_Msk (0x1UL << RCC_APB1ENR2_MDIOSEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_MDIOSEN RCC_APB1ENR2_MDIOSEN_Msk +#define RCC_APB1ENR2_FDCANEN_Pos (8U) +#define RCC_APB1ENR2_FDCANEN_Msk (0x1UL << RCC_APB1ENR2_FDCANEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR2_FDCANEN RCC_APB1ENR2_FDCANEN_Msk +#define RCC_APB1ENR2_UCPD1EN_Pos (27U) +#define RCC_APB1ENR2_UCPD1EN_Msk (0x1UL << RCC_APB1ENR2_UCPD1EN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR2_UCPD1EN RCC_APB1ENR2_UCPD1EN_Msk + +/******************** Bit definition for RCC_APB2ENR register ***************/ +#define RCC_APB2ENR_TIM1EN_Pos (0U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (4U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_SPI4EN_Pos (13U) +#define RCC_APB2ENR_SPI4EN_Msk (0x1UL << RCC_APB2ENR_SPI4EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_SPI4EN RCC_APB2ENR_SPI4EN_Msk +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk +#define RCC_APB2ENR_SPI5EN_Pos (20U) +#define RCC_APB2ENR_SPI5EN_Msk (0x1UL << RCC_APB2ENR_SPI5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_SPI5EN RCC_APB2ENR_SPI5EN_Msk +#define RCC_APB2ENR_SAI1EN_Pos (22U) +#define RCC_APB2ENR_SAI1EN_Msk (0x1UL << RCC_APB2ENR_SAI1EN_Pos) /*!< 0x00400000 */ +#define RCC_APB2ENR_SAI1EN RCC_APB2ENR_SAI1EN_Msk +#define RCC_APB2ENR_SAI2EN_Pos (23U) +#define RCC_APB2ENR_SAI2EN_Msk (0x1UL << RCC_APB2ENR_SAI2EN_Pos) /*!< 0x00800000 */ +#define RCC_APB2ENR_SAI2EN RCC_APB2ENR_SAI2EN_Msk + +/******************** Bit definition for RCC_APB4ENR register ***************/ +#define RCC_APB4ENR_SBSEN_Pos (1U) +#define RCC_APB4ENR_SBSEN_Msk (0x1UL << RCC_APB4ENR_SBSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4ENR_SBSEN RCC_APB4ENR_SBSEN_Msk +#define RCC_APB4ENR_LPUART1EN_Pos (3U) +#define RCC_APB4ENR_LPUART1EN_Msk (0x1UL << RCC_APB4ENR_LPUART1EN_Pos) /*!< 0x00000008 */ +#define RCC_APB4ENR_LPUART1EN RCC_APB4ENR_LPUART1EN_Msk +#define RCC_APB4ENR_SPI6EN_Pos (5U) +#define RCC_APB4ENR_SPI6EN_Msk (0x1UL << RCC_APB4ENR_SPI6EN_Pos) /*!< 0x00000020 */ +#define RCC_APB4ENR_SPI6EN RCC_APB4ENR_SPI6EN_Msk +#define RCC_APB4ENR_LPTIM2EN_Pos (9U) +#define RCC_APB4ENR_LPTIM2EN_Msk (0x1UL << RCC_APB4ENR_LPTIM2EN_Pos) /*!< 0x00000200 */ +#define RCC_APB4ENR_LPTIM2EN RCC_APB4ENR_LPTIM2EN_Msk +#define RCC_APB4ENR_LPTIM3EN_Pos (10U) +#define RCC_APB4ENR_LPTIM3EN_Msk (0x1UL << RCC_APB4ENR_LPTIM3EN_Pos) /*!< 0x00000400 */ +#define RCC_APB4ENR_LPTIM3EN RCC_APB4ENR_LPTIM3EN_Msk +#define RCC_APB4ENR_LPTIM4EN_Pos (11U) +#define RCC_APB4ENR_LPTIM4EN_Msk (0x1UL << RCC_APB4ENR_LPTIM4EN_Pos) /*!< 0x00000800 */ +#define RCC_APB4ENR_LPTIM4EN RCC_APB4ENR_LPTIM4EN_Msk +#define RCC_APB4ENR_LPTIM5EN_Pos (12U) +#define RCC_APB4ENR_LPTIM5EN_Msk (0x1UL << RCC_APB4ENR_LPTIM5EN_Pos) /*!< 0x00001000 */ +#define RCC_APB4ENR_LPTIM5EN RCC_APB4ENR_LPTIM5EN_Msk +#define RCC_APB4ENR_VREFEN_Pos (15U) +#define RCC_APB4ENR_VREFEN_Msk (0x1UL << RCC_APB4ENR_VREFEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4ENR_VREFEN RCC_APB4ENR_VREFEN_Msk +#define RCC_APB4ENR_RTCAPBEN_Pos (16U) +#define RCC_APB4ENR_RTCAPBEN_Msk (0x1UL << RCC_APB4ENR_RTCAPBEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4ENR_RTCAPBEN RCC_APB4ENR_RTCAPBEN_Msk +#define RCC_APB4ENR_DTSEN_Pos (26U) +#define RCC_APB4ENR_DTSEN_Msk (0x1UL << RCC_APB4ENR_DTSEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4ENR_DTSEN RCC_APB4ENR_DTSEN_Msk + +/******************** Bit definition for RCC_APB5ENR register ***************/ +#define RCC_APB5ENR_DCMIPPEN_Pos (2U) +#define RCC_APB5ENR_DCMIPPEN_Msk (0x1UL << RCC_APB5ENR_DCMIPPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5ENR_DCMIPPEN RCC_APB5ENR_DCMIPPEN_Msk +#define RCC_APB5ENR_GFXTIMEN_Pos (4U) +#define RCC_APB5ENR_GFXTIMEN_Msk (0x1UL << RCC_APB5ENR_GFXTIMEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5ENR_GFXTIMEN RCC_APB5ENR_GFXTIMEN_Msk + +/******************** Bit definition for RCC_AHB1LPENR register *************/ +#define RCC_AHB1LPENR_GPDMA1LPEN_Pos (4U) +#define RCC_AHB1LPENR_GPDMA1LPEN_Msk (0x1UL << RCC_AHB1LPENR_GPDMA1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1LPENR_GPDMA1LPEN RCC_AHB1LPENR_GPDMA1LPEN_Msk +#define RCC_AHB1LPENR_ADC12LPEN_Pos (5U) +#define RCC_AHB1LPENR_ADC12LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADC12LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1LPENR_ADC12LPEN RCC_AHB1LPENR_ADC12LPEN_Msk +#define RCC_AHB1LPENR_ETH1MACLPEN_Pos (15U) +#define RCC_AHB1LPENR_ETH1MACLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1MACLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1LPENR_ETH1MACLPEN RCC_AHB1LPENR_ETH1MACLPEN_Msk +#define RCC_AHB1LPENR_ETH1TXLPEN_Pos (16U) +#define RCC_AHB1LPENR_ETH1TXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1TXLPEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1LPENR_ETH1TXLPEN RCC_AHB1LPENR_ETH1TXLPEN_Msk +#define RCC_AHB1LPENR_ETH1RXLPEN_Pos (17U) +#define RCC_AHB1LPENR_ETH1RXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1RXLPEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1LPENR_ETH1RXLPEN RCC_AHB1LPENR_ETH1RXLPEN_Msk +#define RCC_AHB1LPENR_UCPDCTRL_Pos (24U) +#define RCC_AHB1LPENR_UCPDCTRL_Msk (0x1UL << RCC_AHB1LPENR_UCPDCTRL_Pos) /*!< 0x01000000 */ +#define RCC_AHB1LPENR_UCPDCTRL RCC_AHB1LPENR_UCPDCTRL_Msk +#define RCC_AHB1LPENR_OTGHSLPEN_Pos (25U) +#define RCC_AHB1LPENR_OTGHSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGHSLPEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1LPENR_OTGHSLPEN RCC_AHB1LPENR_OTGHSLPEN_Msk +#define RCC_AHB1LPENR_USBPHYCLPEN_Pos (26U) +#define RCC_AHB1LPENR_USBPHYCLPEN_Msk (0x1UL << RCC_AHB1LPENR_USBPHYCLPEN_Pos)/*!< 0x04000000 */ +#define RCC_AHB1LPENR_USBPHYCLPEN RCC_AHB1LPENR_USBPHYCLPEN_Msk +#define RCC_AHB1LPENR_OTGFSLPEN_Pos (27U) +#define RCC_AHB1LPENR_OTGFSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGFSLPEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1LPENR_OTGFSLPEN RCC_AHB1LPENR_OTGFSLPEN_Msk +#define RCC_AHB1LPENR_ADF1LPEN_Pos (31U) +#define RCC_AHB1LPENR_ADF1LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADF1LPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1LPENR_ADF1LPEN RCC_AHB1LPENR_ADF1LPEN_Msk + +/******************** Bit definition for RCC_AHB2LPENR register *************/ +#define RCC_AHB2LPENR_PSSILPEN_Pos (1U) +#define RCC_AHB2LPENR_PSSILPEN_Msk (0x1UL << RCC_AHB2LPENR_PSSILPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2LPENR_PSSILPEN RCC_AHB2LPENR_PSSILPEN_Msk +#define RCC_AHB2LPENR_SDMMC2LPEN_Pos (9U) +#define RCC_AHB2LPENR_SDMMC2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SDMMC2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2LPENR_SDMMC2LPEN RCC_AHB2LPENR_SDMMC2LPEN_Msk +#define RCC_AHB2LPENR_CORDICLPEN_Pos (14U) +#define RCC_AHB2LPENR_CORDICLPEN_Msk (0x1UL << RCC_AHB2LPENR_CORDICLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2LPENR_CORDICLPEN RCC_AHB2LPENR_CORDICLPEN_Msk +#define RCC_AHB2LPENR_SRAM1LPEN_Pos (29U) +#define RCC_AHB2LPENR_SRAM1LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM1LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2LPENR_SRAM1LPEN RCC_AHB2LPENR_SRAM1LPEN_Msk +#define RCC_AHB2LPENR_SRAM2LPEN_Pos (30U) +#define RCC_AHB2LPENR_SRAM2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM2LPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2LPENR_SRAM2LPEN RCC_AHB2LPENR_SRAM2LPEN_Msk + +/******************** Bit definition for RCC_AHB3LPENR register *************/ +#define RCC_AHB3LPENR_RNGLPEN_Pos (0U) +#define RCC_AHB3LPENR_RNGLPEN_Msk (0x1UL << RCC_AHB3LPENR_RNGLPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3LPENR_RNGLPEN RCC_AHB3LPENR_RNGLPEN_Msk +#define RCC_AHB3LPENR_HASHLPEN_Pos (1U) +#define RCC_AHB3LPENR_HASHLPEN_Msk (0x1UL << RCC_AHB3LPENR_HASHLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3LPENR_HASHLPEN RCC_AHB3LPENR_HASHLPEN_Msk +#define RCC_AHB3LPENR_CRYPLPEN_Pos (2U) +#define RCC_AHB3LPENR_CRYPLPEN_Msk (0x1UL << RCC_AHB3LPENR_CRYPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB3LPENR_CRYPLPEN RCC_AHB3LPENR_CRYPLPEN_Msk +#define RCC_AHB3LPENR_SAESLPEN_Pos (4U) +#define RCC_AHB3LPENR_SAESLPEN_Msk (0x1UL << RCC_AHB3LPENR_SAESLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB3LPENR_SAESLPEN RCC_AHB3LPENR_SAESLPEN_Msk +#define RCC_AHB3LPENR_PKALPEN_Pos (6U) +#define RCC_AHB3LPENR_PKALPEN_Msk (0x1UL << RCC_AHB3LPENR_PKALPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3LPENR_PKALPEN RCC_AHB3LPENR_PKALPEN_Msk + +/******************** Bit definition for RCC_AHB4LPENR register *************/ +#define RCC_AHB4LPENR_GPIOALPEN_Pos (0U) +#define RCC_AHB4LPENR_GPIOALPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOALPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4LPENR_GPIOALPEN RCC_AHB4LPENR_GPIOALPEN_Msk +#define RCC_AHB4LPENR_GPIOBLPEN_Pos (1U) +#define RCC_AHB4LPENR_GPIOBLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOBLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4LPENR_GPIOBLPEN RCC_AHB4LPENR_GPIOBLPEN_Msk +#define RCC_AHB4LPENR_GPIOCLPEN_Pos (2U) +#define RCC_AHB4LPENR_GPIOCLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOCLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4LPENR_GPIOCLPEN RCC_AHB4LPENR_GPIOCLPEN_Msk +#define RCC_AHB4LPENR_GPIODLPEN_Pos (3U) +#define RCC_AHB4LPENR_GPIODLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIODLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4LPENR_GPIODLPEN RCC_AHB4LPENR_GPIODLPEN_Msk +#define RCC_AHB4LPENR_GPIOELPEN_Pos (4U) +#define RCC_AHB4LPENR_GPIOELPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOELPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4LPENR_GPIOELPEN RCC_AHB4LPENR_GPIOELPEN_Msk +#define RCC_AHB4LPENR_GPIOFLPEN_Pos (5U) +#define RCC_AHB4LPENR_GPIOFLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOFLPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4LPENR_GPIOFLPEN RCC_AHB4LPENR_GPIOFLPEN_Msk +#define RCC_AHB4LPENR_GPIOGLPEN_Pos (6U) +#define RCC_AHB4LPENR_GPIOGLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOGLPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4LPENR_GPIOGLPEN RCC_AHB4LPENR_GPIOGLPEN_Msk +#define RCC_AHB4LPENR_GPIOHLPEN_Pos (7U) +#define RCC_AHB4LPENR_GPIOHLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOHLPEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4LPENR_GPIOHLPEN RCC_AHB4LPENR_GPIOHLPEN_Msk +#define RCC_AHB4LPENR_GPIOMLPEN_Pos (12U) +#define RCC_AHB4LPENR_GPIOMLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOMLPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4LPENR_GPIOMLPEN RCC_AHB4LPENR_GPIOMLPEN_Msk +#define RCC_AHB4LPENR_GPIONLPEN_Pos (13U) +#define RCC_AHB4LPENR_GPIONLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIONLPEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4LPENR_GPIONLPEN RCC_AHB4LPENR_GPIONLPEN_Msk +#define RCC_AHB4LPENR_GPIOOLPEN_Pos (14U) +#define RCC_AHB4LPENR_GPIOOLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOOLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4LPENR_GPIOOLPEN RCC_AHB4LPENR_GPIOOLPEN_Msk +#define RCC_AHB4LPENR_GPIOPLPEN_Pos (15U) +#define RCC_AHB4LPENR_GPIOPLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOPLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4LPENR_GPIOPLPEN RCC_AHB4LPENR_GPIOPLPEN_Msk +#define RCC_AHB4LPENR_CRCLPEN_Pos (19U) +#define RCC_AHB4LPENR_CRCLPEN_Msk (0x1UL << RCC_AHB4LPENR_CRCLPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4LPENR_CRCLPEN RCC_AHB4LPENR_CRCLPEN_Msk +#define RCC_AHB4LPENR_BKPRAMLPEN_Pos (28U) +#define RCC_AHB4LPENR_BKPRAMLPEN_Msk (0x1UL << RCC_AHB4LPENR_BKPRAMLPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4LPENR_BKPRAMLPEN RCC_AHB4LPENR_BKPRAMLPEN_Msk + +/******************** Bit definition for RCC_AHB5LPENR register *************/ +#define RCC_AHB5LPENR_HPDMA1LPEN_Pos (0U) +#define RCC_AHB5LPENR_HPDMA1LPEN_Msk (0x1UL << RCC_AHB5LPENR_HPDMA1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5LPENR_HPDMA1LPEN RCC_AHB5LPENR_HPDMA1LPEN_Msk +#define RCC_AHB5LPENR_DMA2DLPEN_Pos (1U) +#define RCC_AHB5LPENR_DMA2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_DMA2DLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5LPENR_DMA2DLPEN RCC_AHB5LPENR_DMA2DLPEN_Msk +#define RCC_AHB5LPENR_FLASHLPEN_Pos (2U) +#define RCC_AHB5LPENR_FLASHLPEN_Msk (0x1UL << RCC_AHB5LPENR_FLASHLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB5LPENR_FLASHLPEN RCC_AHB5LPENR_FLASHLPEN_Msk +#define RCC_AHB5LPENR_JPEGLPEN_Pos (3U) +#define RCC_AHB5LPENR_JPEGLPEN_Msk (0x1UL << RCC_AHB5LPENR_JPEGLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5LPENR_JPEGLPEN RCC_AHB5LPENR_JPEGLPEN_Msk +#define RCC_AHB5LPENR_FMCLPEN_Pos (4U) +#define RCC_AHB5LPENR_FMCLPEN_Msk (0x1UL << RCC_AHB5LPENR_FMCLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5LPENR_FMCLPEN RCC_AHB5LPENR_FMCLPEN_Msk +#define RCC_AHB5LPENR_XSPI1LPEN_Pos (5U) +#define RCC_AHB5LPENR_XSPI1LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI1LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5LPENR_XSPI1LPEN RCC_AHB5LPENR_XSPI1LPEN_Msk +#define RCC_AHB5LPENR_SDMMC1LPEN_Pos (8U) +#define RCC_AHB5LPENR_SDMMC1LPEN_Msk (0x1UL << RCC_AHB5LPENR_SDMMC1LPEN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5LPENR_SDMMC1LPEN RCC_AHB5LPENR_SDMMC1LPEN_Msk +#define RCC_AHB5LPENR_XSPI2LPEN_Pos (12U) +#define RCC_AHB5LPENR_XSPI2LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI2LPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5LPENR_XSPI2LPEN RCC_AHB5LPENR_XSPI2LPEN_Msk +#define RCC_AHB5LPENR_XSPIMLPEN_Pos (14U) +#define RCC_AHB5LPENR_XSPIMLPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPIMLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5LPENR_XSPIMLPEN RCC_AHB5LPENR_XSPIMLPEN_Msk +#define RCC_AHB5LPENR_GFXMMULPEN_Pos (19U) +#define RCC_AHB5LPENR_GFXMMULPEN_Msk (0x1UL << RCC_AHB5LPENR_GFXMMULPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5LPENR_GFXMMULPEN RCC_AHB5LPENR_GFXMMULPEN_Msk +#define RCC_AHB5LPENR_DTCM1LPEN_Pos (28U) +#define RCC_AHB5LPENR_DTCM1LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM1LPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB5LPENR_DTCM1LPEN RCC_AHB5LPENR_DTCM1LPEN_Msk +#define RCC_AHB5LPENR_DTCM2LPEN_Pos (29U) +#define RCC_AHB5LPENR_DTCM2LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM2LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB5LPENR_DTCM2LPEN RCC_AHB5LPENR_DTCM2LPEN_Msk +#define RCC_AHB5LPENR_ITCMLPEN_Pos (30U) +#define RCC_AHB5LPENR_ITCMLPEN_Msk (0x1UL << RCC_AHB5LPENR_ITCMLPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB5LPENR_ITCMLPEN RCC_AHB5LPENR_ITCMLPEN_Msk +#define RCC_AHB5LPENR_AXISRAMLPEN_Pos (31U) +#define RCC_AHB5LPENR_AXISRAMLPEN_Msk (0x1UL << RCC_AHB5LPENR_AXISRAMLPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB5LPENR_AXISRAMLPEN RCC_AHB5LPENR_AXISRAMLPEN_Msk + +/******************** Bit definition for RCC_APB1LPENR1 register ************/ +#define RCC_APB1LPENR1_TIM2LPEN_Pos (0U) +#define RCC_APB1LPENR1_TIM2LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM2LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1LPENR1_TIM2LPEN RCC_APB1LPENR1_TIM2LPEN_Msk +#define RCC_APB1LPENR1_TIM3LPEN_Pos (1U) +#define RCC_APB1LPENR1_TIM3LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM3LPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR1_TIM3LPEN RCC_APB1LPENR1_TIM3LPEN_Msk +#define RCC_APB1LPENR1_TIM4LPEN_Pos (2U) +#define RCC_APB1LPENR1_TIM4LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM4LPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB1LPENR1_TIM4LPEN RCC_APB1LPENR1_TIM4LPEN_Msk +#define RCC_APB1LPENR1_TIM5LPEN_Pos (3U) +#define RCC_APB1LPENR1_TIM5LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM5LPEN_Pos) /*!< 0x00000008 */ +#define RCC_APB1LPENR1_TIM5LPEN RCC_APB1LPENR1_TIM5LPEN_Msk +#define RCC_APB1LPENR1_TIM6LPEN_Pos (4U) +#define RCC_APB1LPENR1_TIM6LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM6LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB1LPENR1_TIM6LPEN RCC_APB1LPENR1_TIM6LPEN_Msk +#define RCC_APB1LPENR1_TIM7LPEN_Pos (5U) +#define RCC_APB1LPENR1_TIM7LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM7LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR1_TIM7LPEN RCC_APB1LPENR1_TIM7LPEN_Msk +#define RCC_APB1LPENR1_TIM12LPEN_Pos (6U) +#define RCC_APB1LPENR1_TIM12LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM12LPEN_Pos) /*!< 0x00000040 */ +#define RCC_APB1LPENR1_TIM12LPEN RCC_APB1LPENR1_TIM12LPEN_Msk +#define RCC_APB1LPENR1_TIM13LPEN_Pos (7U) +#define RCC_APB1LPENR1_TIM13LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM13LPEN_Pos) /*!< 0x00000080 */ +#define RCC_APB1LPENR1_TIM13LPEN RCC_APB1LPENR1_TIM13LPEN_Msk +#define RCC_APB1LPENR1_TIM14LPEN_Pos (8U) +#define RCC_APB1LPENR1_TIM14LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM14LPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR1_TIM14LPEN RCC_APB1LPENR1_TIM14LPEN_Msk +#define RCC_APB1LPENR1_LPTIM1LPEN_Pos (9U) +#define RCC_APB1LPENR1_LPTIM1LPEN_Msk (0x1UL << RCC_APB1LPENR1_LPTIM1LPEN_Pos)/*!< 0x00000200 */ +#define RCC_APB1LPENR1_LPTIM1LPEN RCC_APB1LPENR1_LPTIM1LPEN_Msk +#define RCC_APB1LPENR1_WWDGLPEN_Pos (11U) +#define RCC_APB1LPENR1_WWDGLPEN_Msk (0x1UL << RCC_APB1LPENR1_WWDGLPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1LPENR1_WWDGLPEN RCC_APB1LPENR1_WWDGLPEN_Msk +#define RCC_APB1LPENR1_SPI2LPEN_Pos (14U) +#define RCC_APB1LPENR1_SPI2LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI2LPEN_Pos) /*!< 0x00004000 */ +#define RCC_APB1LPENR1_SPI2LPEN RCC_APB1LPENR1_SPI2LPEN_Msk +#define RCC_APB1LPENR1_SPI3LPEN_Pos (15U) +#define RCC_APB1LPENR1_SPI3LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI3LPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB1LPENR1_SPI3LPEN RCC_APB1LPENR1_SPI3LPEN_Msk +#define RCC_APB1LPENR1_SPDIFRXLPEN_Pos (16U) +#define RCC_APB1LPENR1_SPDIFRXLPEN_Msk (0x1UL << RCC_APB1LPENR1_SPDIFRXLPEN_Pos)/*!< 0x00010000 */ +#define RCC_APB1LPENR1_SPDIFRXLPEN RCC_APB1LPENR1_SPDIFRXLPEN_Msk +#define RCC_APB1LPENR1_USART2LPEN_Pos (17U) +#define RCC_APB1LPENR1_USART2LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART2LPEN_Pos)/*!< 0x00020000 */ +#define RCC_APB1LPENR1_USART2LPEN RCC_APB1LPENR1_USART2LPEN_Msk +#define RCC_APB1LPENR1_USART3LPEN_Pos (18U) +#define RCC_APB1LPENR1_USART3LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART3LPEN_Pos)/*!< 0x00040000 */ +#define RCC_APB1LPENR1_USART3LPEN RCC_APB1LPENR1_USART3LPEN_Msk +#define RCC_APB1LPENR1_UART4LPEN_Pos (19U) +#define RCC_APB1LPENR1_UART4LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART4LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB1LPENR1_UART4LPEN RCC_APB1LPENR1_UART4LPEN_Msk +#define RCC_APB1LPENR1_UART5LPEN_Pos (20U) +#define RCC_APB1LPENR1_UART5LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB1LPENR1_UART5LPEN RCC_APB1LPENR1_UART5LPEN_Msk +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos (21U) +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1LPENR1_I2C1_I3C1LPEN RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk +#define RCC_APB1LPENR1_I2C2LPEN_Pos (22U) +#define RCC_APB1LPENR1_I2C2LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C2LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB1LPENR1_I2C2LPEN RCC_APB1LPENR1_I2C2LPEN_Msk +#define RCC_APB1LPENR1_I2C3LPEN_Pos (23U) +#define RCC_APB1LPENR1_I2C3LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C3LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1LPENR1_I2C3LPEN RCC_APB1LPENR1_I2C3LPEN_Msk +#define RCC_APB1LPENR1_CECLPEN_Pos (27U) +#define RCC_APB1LPENR1_CECLPEN_Msk (0x1UL << RCC_APB1LPENR1_CECLPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR1_CECLPEN RCC_APB1LPENR1_CECLPEN_Msk +#define RCC_APB1LPENR1_UART7LPEN_Pos (30U) +#define RCC_APB1LPENR1_UART7LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART7LPEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1LPENR1_UART7LPEN RCC_APB1LPENR1_UART7LPEN_Msk +#define RCC_APB1LPENR1_UART8LPEN_Pos (31U) +#define RCC_APB1LPENR1_UART8LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART8LPEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1LPENR1_UART8LPEN RCC_APB1LPENR1_UART8LPEN_Msk + +/******************** Bit definition for RCC_PB1LPENR2 register ************/ +#define RCC_APB1LPENR2_CRSLPEN_Pos (1U) +#define RCC_APB1LPENR2_CRSLPEN_Msk (0x1UL << RCC_APB1LPENR2_CRSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR2_CRSLPEN RCC_APB1LPENR2_CRSLPEN_Msk +#define RCC_APB1LPENR2_MDIOSLPEN_Pos (5U) +#define RCC_APB1LPENR2_MDIOSLPEN_Msk (0x1UL << RCC_APB1LPENR2_MDIOSLPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR2_MDIOSLPEN RCC_APB1LPENR2_MDIOSLPEN_Msk +#define RCC_APB1LPENR2_FDCANLPEN_Pos (8U) +#define RCC_APB1LPENR2_FDCANLPEN_Msk (0x1UL << RCC_APB1LPENR2_FDCANLPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR2_FDCANLPEN RCC_APB1LPENR2_FDCANLPEN_Msk +#define RCC_APB1LPENR2_UCPD1LPEN_Pos (27U) +#define RCC_APB1LPENR2_UCPD1LPEN_Msk (0x1UL << RCC_APB1LPENR2_UCPD1LPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR2_UCPD1LPEN RCC_APB1LPENR2_UCPD1LPEN_Msk + +/******************** Bit definition for RCC_APB2LPENR register *************/ +#define RCC_APB2LPENR_TIM1LPEN_Pos (0U) +#define RCC_APB2LPENR_TIM1LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2LPENR_TIM1LPEN RCC_APB2LPENR_TIM1LPEN_Msk +#define RCC_APB2LPENR_USART1LPEN_Pos (4U) +#define RCC_APB2LPENR_USART1LPEN_Msk (0x1UL << RCC_APB2LPENR_USART1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2LPENR_USART1LPEN RCC_APB2LPENR_USART1LPEN_Msk +#define RCC_APB2LPENR_SPI1LPEN_Pos (12U) +#define RCC_APB2LPENR_SPI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI1LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2LPENR_SPI1LPEN RCC_APB2LPENR_SPI1LPEN_Msk +#define RCC_APB2LPENR_SPI4LPEN_Pos (13U) +#define RCC_APB2LPENR_SPI4LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI4LPEN_Pos) /*!< 0x00002000 */ +#define RCC_APB2LPENR_SPI4LPEN RCC_APB2LPENR_SPI4LPEN_Msk +#define RCC_APB2LPENR_TIM15LPEN_Pos (16U) +#define RCC_APB2LPENR_TIM15LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM15LPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB2LPENR_TIM15LPEN RCC_APB2LPENR_TIM15LPEN_Msk +#define RCC_APB2LPENR_TIM16LPEN_Pos (17U) +#define RCC_APB2LPENR_TIM16LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM16LPEN_Pos) /*!< 0x00020000 */ +#define RCC_APB2LPENR_TIM16LPEN RCC_APB2LPENR_TIM16LPEN_Msk +#define RCC_APB2LPENR_TIM17LPEN_Pos (18U) +#define RCC_APB2LPENR_TIM17LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM17LPEN_Pos) /*!< 0x00040000 */ +#define RCC_APB2LPENR_TIM17LPEN RCC_APB2LPENR_TIM17LPEN_Msk +#define RCC_APB2LPENR_TIM9LPEN_Pos (19U) +#define RCC_APB2LPENR_TIM9LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM9LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB2LPENR_TIM9LPEN RCC_APB2LPENR_TIM9LPEN_Msk +#define RCC_APB2LPENR_SPI5LPEN_Pos (20U) +#define RCC_APB2LPENR_SPI5LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB2LPENR_SPI5LPEN RCC_APB2LPENR_SPI5LPEN_Msk +#define RCC_APB2LPENR_SAI1LPEN_Pos (22U) +#define RCC_APB2LPENR_SAI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI1LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB2LPENR_SAI1LPEN RCC_APB2LPENR_SAI1LPEN_Msk +#define RCC_APB2LPENR_SAI2LPEN_Pos (23U) +#define RCC_APB2LPENR_SAI2LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI2LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB2LPENR_SAI2LPEN RCC_APB2LPENR_SAI2LPEN_Msk + +/******************** Bit definition for RCC_APB4LPENR register *************/ +#define RCC_APB4LPENR_SBSLPEN_Pos (1U) +#define RCC_APB4LPENR_SBSLPEN_Msk (0x1UL << RCC_APB4LPENR_SBSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4LPENR_SBSLPEN RCC_APB4LPENR_SBSLPEN_Msk +#define RCC_APB4LPENR_LPUART1LPEN_Pos (3U) +#define RCC_APB4LPENR_LPUART1LPEN_Msk (0x1UL << RCC_APB4LPENR_LPUART1LPEN_Pos)/*!< 0x00000008 */ +#define RCC_APB4LPENR_LPUART1LPEN RCC_APB4LPENR_LPUART1LPEN_Msk +#define RCC_APB4LPENR_SPI6LPEN_Pos (5U) +#define RCC_APB4LPENR_SPI6LPEN_Msk (0x1UL << RCC_APB4LPENR_SPI6LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB4LPENR_SPI6LPEN RCC_APB4LPENR_SPI6LPEN_Msk +#define RCC_APB4LPENR_LPTIM2LPEN_Pos (9U) +#define RCC_APB4LPENR_LPTIM2LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_APB4LPENR_LPTIM2LPEN RCC_APB4LPENR_LPTIM2LPEN_Msk +#define RCC_APB4LPENR_LPTIM3LPEN_Pos (10U) +#define RCC_APB4LPENR_LPTIM3LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM3LPEN_Pos) /*!< 0x00000400 */ +#define RCC_APB4LPENR_LPTIM3LPEN RCC_APB4LPENR_LPTIM3LPEN_Msk +#define RCC_APB4LPENR_LPTIM4LPEN_Pos (11U) +#define RCC_APB4LPENR_LPTIM4LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM4LPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB4LPENR_LPTIM4LPEN RCC_APB4LPENR_LPTIM4LPEN_Msk +#define RCC_APB4LPENR_LPTIM5LPEN_Pos (12U) +#define RCC_APB4LPENR_LPTIM5LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM5LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB4LPENR_LPTIM5LPEN RCC_APB4LPENR_LPTIM5LPEN_Msk +#define RCC_APB4LPENR_VREFLPEN_Pos (15U) +#define RCC_APB4LPENR_VREFLPEN_Msk (0x1UL << RCC_APB4LPENR_VREFLPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4LPENR_VREFLPEN RCC_APB4LPENR_VREFLPEN_Msk +#define RCC_APB4LPENR_RTCAPBLPEN_Pos (16U) +#define RCC_APB4LPENR_RTCAPBLPEN_Msk (0x1UL << RCC_APB4LPENR_RTCAPBLPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4LPENR_RTCAPBLPEN RCC_APB4LPENR_RTCAPBLPEN_Msk +#define RCC_APB4LPENR_DTSLPEN_Pos (26U) +#define RCC_APB4LPENR_DTSLPEN_Msk (0x1UL << RCC_APB4LPENR_DTSLPEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4LPENR_DTSLPEN RCC_APB4LPENR_DTSLPEN_Msk + +/******************** Bit definition for RCC_APB5LPENR register *************/ +#define RCC_APB5LPENR_DCMIPPLPEN_Pos (2U) +#define RCC_APB5LPENR_DCMIPPLPEN_Msk (0x1UL << RCC_APB5LPENR_DCMIPPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5LPENR_DCMIPPLPEN RCC_APB5LPENR_DCMIPPLPEN_Msk +#define RCC_APB5LPENR_GFXTIMLPEN_Pos (4U) +#define RCC_APB5LPENR_GFXTIMLPEN_Msk (0x1UL << RCC_APB5LPENR_GFXTIMLPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5LPENR_GFXTIMLPEN RCC_APB5LPENR_GFXTIMLPEN_Msk + + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RNG_CR register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk +#define RNG_CR_ARDIS_Pos (7U) +#define RNG_CR_ARDIS_Msk (0x1UL << RNG_CR_ARDIS_Pos) +#define RNG_CR_ARDIS RNG_CR_ARDIS_Msk +#define RNG_CR_RNG_CONFIG3_Pos (8U) +#define RNG_CR_RNG_CONFIG3_Msk (0xFUL << RNG_CR_RNG_CONFIG3_Pos) +#define RNG_CR_RNG_CONFIG3 RNG_CR_RNG_CONFIG3_Msk +#define RNG_CR_NISTC_Pos (12U) +#define RNG_CR_NISTC_Msk (0x1UL << RNG_CR_NISTC_Pos) +#define RNG_CR_NISTC RNG_CR_NISTC_Msk +#define RNG_CR_RNG_CONFIG2_Pos (13U) +#define RNG_CR_RNG_CONFIG2_Msk (0x7UL << RNG_CR_RNG_CONFIG2_Pos) +#define RNG_CR_RNG_CONFIG2 RNG_CR_RNG_CONFIG2_Msk +#define RNG_CR_CLKDIV_Pos (16U) +#define RNG_CR_CLKDIV_Msk (0xFUL << RNG_CR_CLKDIV_Pos) +#define RNG_CR_CLKDIV RNG_CR_CLKDIV_Msk +#define RNG_CR_CLKDIV_0 (0x1UL << RNG_CR_CLKDIV_Pos) /*!< 0x00010000 */ +#define RNG_CR_CLKDIV_1 (0x2UL << RNG_CR_CLKDIV_Pos) /*!< 0x00020000 */ +#define RNG_CR_CLKDIV_2 (0x4UL << RNG_CR_CLKDIV_Pos) /*!< 0x00040000 */ +#define RNG_CR_CLKDIV_3 (0x8UL << RNG_CR_CLKDIV_Pos) /*!< 0x00080000 */ +#define RNG_CR_RNG_CONFIG1_Pos (20U) +#define RNG_CR_RNG_CONFIG1_Msk (0x3FUL << RNG_CR_RNG_CONFIG1_Pos) +#define RNG_CR_RNG_CONFIG1 RNG_CR_RNG_CONFIG1_Msk +#define RNG_CR_CONDRST_Pos (30U) +#define RNG_CR_CONDRST_Msk (0x1UL << RNG_CR_CONDRST_Pos) +#define RNG_CR_CONDRST RNG_CR_CONDRST_Msk +#define RNG_CR_CONFIGLOCK_Pos (31U) +#define RNG_CR_CONFIGLOCK_Msk (0x1UL << RNG_CR_CONFIGLOCK_Pos) +#define RNG_CR_CONFIGLOCK RNG_CR_CONFIGLOCK_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************** Bits definition for RNG_HTCR register *******************/ +#define RNG_HTCR_HTCFG_Pos (0U) +#define RNG_HTCR_HTCFG_Msk (0xFFFFFFFFUL << RNG_HTCR_HTCFG_Pos) /*!< 0xFFFFFFFF */ +#define RNG_HTCR_HTCFG RNG_HTCR_HTCFG_Msk + + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk +#define RTC_TR_SU_0 (0x1UL << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2UL << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4UL << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8UL << RTC_TR_SU_Pos) /*!< 0x00000008 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk +#define RTC_TR_ST_0 (0x1UL << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2UL << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4UL << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk +#define RTC_TR_MNU_0 (0x1UL << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2UL << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4UL << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8UL << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk +#define RTC_TR_MNT_0 (0x1UL << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2UL << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4UL << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk +#define RTC_TR_HU_0 (0x1UL << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2UL << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4UL << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8UL << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk +#define RTC_TR_HT_0 (0x1UL << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2UL << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk +#define RTC_DR_DU_0 (0x1UL << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2UL << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4UL << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8UL << RTC_DR_DU_Pos) /*!< 0x00000008 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk +#define RTC_DR_DT_0 (0x1UL << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2UL << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk +#define RTC_DR_MU_0 (0x1UL << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2UL << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4UL << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8UL << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk +#define RTC_DR_WDU_0 (0x1UL << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2UL << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4UL << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk +#define RTC_DR_YU_0 (0x1UL << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2UL << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4UL << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8UL << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk +#define RTC_DR_YT_0 (0x1UL << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2UL << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4UL << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8UL << RTC_DR_YT_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFFFFFUL << RTC_SSR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk + +/******************** Bits definition for RTC_ICSR register ******************/ +#define RTC_ICSR_WUTWF_Pos (2U) +#define RTC_ICSR_WUTWF_Msk (0x1UL << RTC_ICSR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ICSR_WUTWF RTC_ICSR_WUTWF_Msk +#define RTC_ICSR_SHPF_Pos (3U) +#define RTC_ICSR_SHPF_Msk (0x1UL << RTC_ICSR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ICSR_SHPF RTC_ICSR_SHPF_Msk +#define RTC_ICSR_INITS_Pos (4U) +#define RTC_ICSR_INITS_Msk (0x1UL << RTC_ICSR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ICSR_INITS RTC_ICSR_INITS_Msk +#define RTC_ICSR_RSF_Pos (5U) +#define RTC_ICSR_RSF_Msk (0x1UL << RTC_ICSR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ICSR_RSF RTC_ICSR_RSF_Msk +#define RTC_ICSR_INITF_Pos (6U) +#define RTC_ICSR_INITF_Msk (0x1UL << RTC_ICSR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ICSR_INITF RTC_ICSR_INITF_Msk +#define RTC_ICSR_INIT_Pos (7U) +#define RTC_ICSR_INIT_Msk (0x1UL << RTC_ICSR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ICSR_INIT RTC_ICSR_INIT_Msk +#define RTC_ICSR_BIN_Pos (8U) +#define RTC_ICSR_BIN_Msk (0x3UL << RTC_ICSR_BIN_Pos) /*!< 0x00000300 */ +#define RTC_ICSR_BIN RTC_ICSR_BIN_Msk +#define RTC_ICSR_BIN_0 (0x1UL << RTC_ICSR_BIN_Pos) /*!< 0x00000100 */ +#define RTC_ICSR_BIN_1 (0x2UL << RTC_ICSR_BIN_Pos) /*!< 0x00000200 */ +#define RTC_ICSR_BCDU_Pos (10U) +#define RTC_ICSR_BCDU_Msk (0x7UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001C00 */ +#define RTC_ICSR_BCDU RTC_ICSR_BCDU_Msk +#define RTC_ICSR_BCDU_0 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000400 */ +#define RTC_ICSR_BCDU_1 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000800 */ +#define RTC_ICSR_BCDU_2 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001000 */ +#define RTC_ICSR_RECALPF_Pos (16U) +#define RTC_ICSR_RECALPF_Msk (0x1UL << RTC_ICSR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ICSR_RECALPF RTC_ICSR_RECALPF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk +#define RTC_WUTR_WUTOCLR_Pos (16U) +#define RTC_WUTR_WUTOCLR_Msk (0xFFFFUL << RTC_WUTR_WUTOCLR_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUTOCLR RTC_WUTR_WUTOCLR_Msk + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_SSRUIE_Pos (7U) +#define RTC_CR_SSRUIE_Msk (0x1UL << RTC_CR_SSRUIE_Pos) /*!< 0x00000080 */ +#define RTC_CR_SSRUIE RTC_CR_SSRUIE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*! */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0x3FUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_MASKSS_4 (0x10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMASSR_MASKSS_5 (0x20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMASSR_SSCLR_Pos (31U) +#define RTC_ALRMASSR_SSCLR_Msk (0x1UL << RTC_ALRMASSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMASSR_SSCLR RTC_ALRMASSR_SSCLR_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0x3FUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_MASKSS_4 (0x10UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBSSR_MASKSS_5 (0x20UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBSSR_SSCLR_Pos (31U) +#define RTC_ALRMBSSR_SSCLR_Msk (0x1UL << RTC_ALRMBSSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBSSR_SSCLR RTC_ALRMBSSR_SSCLR_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_SSRUF_Pos (6U) +#define RTC_SR_SSRUF_Msk (0x1UL << RTC_SR_SSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SR_SSRUF RTC_SR_SSRUF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_SSRUMF_Pos (6U) +#define RTC_MISR_SSRUMF_Msk (0x1UL << RTC_MISR_SSRUMF_Pos) /*!< 0x00000040 */ +#define RTC_MISR_SSRUMF RTC_MISR_SSRUMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CSSRUF_Pos (6U) +#define RTC_SCR_CSSRUF_Msk (0x1UL << RTC_SCR_CSSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SCR_CSSRUF RTC_SCR_CSSRUF_Msk + +/******************** Bits definition for RTC_ALRABINR register ******************/ +#define RTC_ALRABINR_SS_Pos (0U) +#define RTC_ALRABINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRABINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRABINR_SS RTC_ALRABINR_SS_Msk + +/******************** Bits definition for RTC_ALRBBINR register ******************/ +#define RTC_ALRBBINR_SS_Pos (0U) +#define RTC_ALRBBINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRBBINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRBBINR_SS RTC_ALRBBINR_SS_Msk + + +/******************************************************************************/ +/* */ +/* Secure Advanced Encryption Standard (SAES) */ +/* */ +/******************************************************************************/ +/******************* Bits definition for SAES_CR register *********************/ +#define SAES_CR_EN_Pos (0U) +#define SAES_CR_EN_Msk (0x1UL << SAES_CR_EN_Pos) /*!< 0x00000001 */ +#define SAES_CR_EN SAES_CR_EN_Msk /*!< SAES Enable */ +#define SAES_CR_DATATYPE_Pos (1U) +#define SAES_CR_DATATYPE_Msk (0x3UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define SAES_CR_DATATYPE SAES_CR_DATATYPE_Msk /*!< Data type selection */ +#define SAES_CR_DATATYPE_0 (0x1UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define SAES_CR_DATATYPE_1 (0x2UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000004 */ +#define SAES_CR_MODE_Pos (3U) +#define SAES_CR_MODE_Msk (0x3UL << SAES_CR_MODE_Pos) /*!< 0x00000018 */ +#define SAES_CR_MODE SAES_CR_MODE_Msk /*!< SAES Mode Of Operation */ +#define SAES_CR_MODE_0 (0x1UL << SAES_CR_MODE_Pos) /*!< 0x00000008 */ +#define SAES_CR_MODE_1 (0x2UL << SAES_CR_MODE_Pos) /*!< 0x00000010 */ +#define SAES_CR_CHMOD_Pos (5U) +#define SAES_CR_CHMOD_Msk (0x803UL << SAES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define SAES_CR_CHMOD SAES_CR_CHMOD_Msk /*!< SAES Chaining Mode */ +#define SAES_CR_CHMOD_0 (0x001UL << SAES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define SAES_CR_CHMOD_1 (0x002UL << SAES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define SAES_CR_CHMOD_2 (0x800UL << SAES_CR_CHMOD_Pos) /*!< 0x00010000 */ +#define SAES_CR_DMAINEN_Pos (11U) +#define SAES_CR_DMAINEN_Msk (0x1UL << SAES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define SAES_CR_DMAINEN SAES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define SAES_CR_DMAOUTEN_Pos (12U) +#define SAES_CR_DMAOUTEN_Msk (0x1UL << SAES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define SAES_CR_DMAOUTEN SAES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ +#define SAES_CR_GCMPH_Pos (13U) +#define SAES_CR_GCMPH_Msk (0x3UL << SAES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define SAES_CR_GCMPH SAES_CR_GCMPH_Msk /*!< GCM Phase */ +#define SAES_CR_GCMPH_0 (0x1UL << SAES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define SAES_CR_GCMPH_1 (0x2UL << SAES_CR_GCMPH_Pos) /*!< 0x00004000 */ +#define SAES_CR_KEYSIZE_Pos (18U) +#define SAES_CR_KEYSIZE_Msk (0x1UL << SAES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define SAES_CR_KEYSIZE SAES_CR_KEYSIZE_Msk /*!< Key size selection */ +#define SAES_CR_NPBLB_Pos (20U) +#define SAES_CR_NPBLB_Msk (0xFUL << SAES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define SAES_CR_NPBLB SAES_CR_NPBLB_Msk /*!< Number of padding bytes in payload last block */ +#define SAES_CR_NPBLB_0 (0x1UL << SAES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define SAES_CR_NPBLB_1 (0x2UL << SAES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define SAES_CR_NPBLB_2 (0x4UL << SAES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define SAES_CR_NPBLB_3 (0x8UL << SAES_CR_NPBLB_Pos) /*!< 0x00800000 */ +#define SAES_CR_KMOD_Pos (24U) +#define SAES_CR_KMOD_Msk (0x3UL << SAES_CR_KMOD_Pos) /*!< 0x00000006 */ +#define SAES_CR_KMOD SAES_CR_KMOD_Msk /*!< Key mode selection */ +#define SAES_CR_KMOD_0 (0x1UL << SAES_CR_KMOD_Pos) /*!< 0x01000000 */ +#define SAES_CR_KMOD_1 (0x2UL << SAES_CR_KMOD_Pos) /*!< 0x02000000 */ +#define SAES_CR_KSHAREID_Pos (26U) +#define SAES_CR_KSHAREID_Msk (0x3UL << SAES_CR_KSHAREID_Pos) /*!< 0x00000006 */ +#define SAES_CR_KSHAREID SAES_CR_KSHAREID_Msk /*!< Key Shared ID */ +#define SAES_CR_KEYSEL_Pos (28U) +#define SAES_CR_KEYSEL_Msk (0x7UL << SAES_CR_KEYSEL_Pos) /*!< 0x00000006 */ +#define SAES_CR_KEYSEL SAES_CR_KEYSEL_Msk /*!< Key Selection */ +#define SAES_CR_KEYSEL_0 (0x1UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_KEYSEL_1 (0x2UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_KEYSEL_2 (0x4UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_IPRST_Pos (31U) +#define SAES_CR_IPRST_Msk (0x1UL << SAES_CR_IPRST_Pos) /*!< 0x80000001 */ +#define SAES_CR_IPRST SAES_CR_IPRST_Msk /*!< SAES IP software reset */ + +/******************* Bits definition for SAES_SR register *********************/ +#define SAES_SR_CCF_Pos (0U) +#define SAES_SR_CCF_Msk (0x1UL << SAES_SR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_SR_CCF SAES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define SAES_SR_RDERR_Pos (1U) +#define SAES_SR_RDERR_Msk (0x1UL << SAES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define SAES_SR_RDERR SAES_SR_RDERR_Msk /*!< Read Error Flag */ +#define SAES_SR_WRERR_Pos (2U) +#define SAES_SR_WRERR_Msk (0x1UL << SAES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define SAES_SR_WRERR SAES_SR_WRERR_Msk /*!< Write Error Flag */ +#define SAES_SR_BUSY_Pos (3U) +#define SAES_SR_BUSY_Msk (0x1UL << SAES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define SAES_SR_BUSY SAES_SR_BUSY_Msk /*!< Busy Flag */ +#define SAES_SR_KEYVALID_Pos (7U) +#define SAES_SR_KEYVALID_Msk (0x1UL << SAES_SR_KEYVALID_Pos) /*!< 0x00000008 */ +#define SAES_SR_KEYVALID SAES_SR_KEYVALID_Msk /*!< KEYVALID Flag */ + +/******************* Bits definition for SAES_DINR register *******************/ +#define SAES_DINR_Pos (0U) +#define SAES_DINR_Msk (0xFFFFFFFFUL << SAES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define SAES_DINR SAES_DINR_Msk /*!< SAES Data Input Register */ + +/******************* Bits definition for SAES_DOUTR register ******************/ +#define SAES_DOUTR_Pos (0U) +#define SAES_DOUTR_Msk (0xFFFFFFFFUL << SAES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define SAES_DOUTR SAES_DOUTR_Msk /*!< SAES Data Output Register */ + +/******************* Bits definition for SAES_KEYR0 register ******************/ +#define SAES_KEYR0_Pos (0U) +#define SAES_KEYR0_Msk (0xFFFFFFFFUL << SAES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR0 SAES_KEYR0_Msk /*!< SAES Key Register 0 */ + +/******************* Bits definition for SAES_KEYR1 register ******************/ +#define SAES_KEYR1_Pos (0U) +#define SAES_KEYR1_Msk (0xFFFFFFFFUL << SAES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR1 SAES_KEYR1_Msk /*!< SAES Key Register 1 */ + +/******************* Bits definition for SAES_KEYR2 register ******************/ +#define SAES_KEYR2_Pos (0U) +#define SAES_KEYR2_Msk (0xFFFFFFFFUL << SAES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR2 SAES_KEYR2_Msk /*!< SAES Key Register 2 */ + +/******************* Bits definition for SAES_KEYR3 register ******************/ +#define SAES_KEYR3_Pos (0U) +#define SAES_KEYR3_Msk (0xFFFFFFFFUL << SAES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR3 SAES_KEYR3_Msk /*!< SAES Key Register 3 */ + +/******************* Bits definition for SAES_KEYR4 register ******************/ +#define SAES_KEYR4_Pos (0U) +#define SAES_KEYR4_Msk (0xFFFFFFFFUL << SAES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR4 SAES_KEYR4_Msk /*!< SAES Key Register 4 */ + +/******************* Bits definition for SAES_KEYR5 register ******************/ +#define SAES_KEYR5_Pos (0U) +#define SAES_KEYR5_Msk (0xFFFFFFFFUL << SAES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR5 SAES_KEYR5_Msk /*!< SAES Key Register 5 */ + +/******************* Bits definition for SAES_KEYR6 register ******************/ +#define SAES_KEYR6_Pos (0U) +#define SAES_KEYR6_Msk (0xFFFFFFFFUL << SAES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR6 SAES_KEYR6_Msk /*!< SAES Key Register 6 */ + +/******************* Bits definition for SAES_KEYR7 register ******************/ +#define SAES_KEYR7_Pos (0U) +#define SAES_KEYR7_Msk (0xFFFFFFFFUL << SAES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR7 SAES_KEYR7_Msk /*!< SAES Key Register 7 */ + +/******************* Bits definition for SAES_IVR0 register ******************/ +#define SAES_IVR0_Pos (0U) +#define SAES_IVR0_Msk (0xFFFFFFFFUL << SAES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR0 SAES_IVR0_Msk /*!< SAES Initialization Vector Register 0 */ + +/******************* Bits definition for SAES_IVR1 register ******************/ +#define SAES_IVR1_Pos (0U) +#define SAES_IVR1_Msk (0xFFFFFFFFUL << SAES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR1 SAES_IVR1_Msk /*!< SAES Initialization Vector Register 1 */ + +/******************* Bits definition for SAES_IVR2 register ******************/ +#define SAES_IVR2_Pos (0U) +#define SAES_IVR2_Msk (0xFFFFFFFFUL << SAES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR2 SAES_IVR2_Msk /*!< SAES Initialization Vector Register 2 */ + +/******************* Bits definition for SAES_IVR3 register ******************/ +#define SAES_IVR3_Pos (0U) +#define SAES_IVR3_Msk (0xFFFFFFFFUL << SAES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR3 SAES_IVR3_Msk /*!< SAES Initialization Vector Register 3 */ + +/******************* Bit definition for SAES_SUSP0R register ******************/ +#define SAES_SUSP0R_Pos (0U) +#define SAES_SUSP0R_Msk (0xFFFFFFFFUL << SAES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP0R SAES_SUSP0R_Msk /*!< SAES Suspend registers 0 */ + +/******************* Bit definition for SAES_SUSP1R register ******************/ +#define SAES_SUSP1R_Pos (0U) +#define SAES_SUSP1R_Msk (0xFFFFFFFFUL << SAES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP1R SAES_SUSP1R_Msk /*!< SAES Suspend registers 1 */ + +/******************* Bit definition for SAES_SUSP2R register ******************/ +#define SAES_SUSP2R_Pos (0U) +#define SAES_SUSP2R_Msk (0xFFFFFFFFUL << SAES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP2R SAES_SUSP2R_Msk /*!< SAES Suspend registers 2 */ + +/******************* Bit definition for SAES_SUSP3R register ******************/ +#define SAES_SUSP3R_Pos (0U) +#define SAES_SUSP3R_Msk (0xFFFFFFFFUL << SAES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP3R SAES_SUSP3R_Msk /*!< SAES Suspend registers 3 */ + +/******************* Bit definition for SAES_SUSP4R register ******************/ +#define SAES_SUSP4R_Pos (0U) +#define SAES_SUSP4R_Msk (0xFFFFFFFFUL << SAES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP4R SAES_SUSP4R_Msk /*!< SAES Suspend registers 4 */ + +/******************* Bit definition for SAES_SUSP5R register ******************/ +#define SAES_SUSP5R_Pos (0U) +#define SAES_SUSP5R_Msk (0xFFFFFFFFUL << SAES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP5R SAES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for SAES_SUSP6R register ******************/ +#define SAES_SUSP6R_Pos (0U) +#define SAES_SUSP6R_Msk (0xFFFFFFFFUL << SAES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP6R SAES_SUSP6R_Msk /*!< SAES Suspend registers 6 */ + +/******************* Bit definition for SAES_SUSP7R register ******************/ +#define SAES_SUSP7R_Pos (0U) +#define SAES_SUSP7R_Msk (0xFFFFFFFFUL << SAES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP7R SAES_SUSP7R_Msk /*!< SAES Suspend registers 7 */ + +/******************* Bits definition for SAES_IER register ******************/ +#define SAES_IER_CCFIE_Pos (0U) +#define SAES_IER_CCFIE_Msk (0x1UL << SAES_IER_CCFIE_Pos) /*!< 0x00000001 */ +#define SAES_IER_CCFIE SAES_IER_CCFIE_Msk /*!< Computation complete flag interrupt enable */ +#define SAES_IER_RWEIE_Pos (1U) +#define SAES_IER_RWEIE_Msk (0x1UL << SAES_IER_RWEIE_Pos) /*!< 0x00000002 */ +#define SAES_IER_RWEIE SAES_IER_RWEIE_Msk /*!< Read or write error Interrupt Enable */ +#define SAES_IER_KEIE_Pos (2U) +#define SAES_IER_KEIE_Msk (0x1UL << SAES_IER_KEIE_Pos) /*!< 0x00000004 */ +#define SAES_IER_KEIE SAES_IER_KEIE_Msk /*!< Key error interrupt enable */ +#define SAES_IER_RNGEIE_Pos (3U) +#define SAES_IER_RNGEIE_Msk (0x1UL << SAES_IER_RNGEIE_Pos) /*!< 0x00000008 */ +#define SAES_IER_RNGEIE SAES_IER_RNGEIE_Msk /*!< Rng error interrupt enable */ + +/******************* Bits definition for SAES_ISR register ******************/ +#define SAES_ISR_CCF_Pos (0U) +#define SAES_ISR_CCF_Msk (0x1UL << SAES_ISR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_ISR_CCF SAES_ISR_CCF_Msk /*!< Computation complete flag */ +#define SAES_ISR_RWEIF_Pos (1U) +#define SAES_ISR_RWEIF_Msk (0x1UL << SAES_ISR_RWEIF_Pos) /*!< 0x00000002 */ +#define SAES_ISR_RWEIF SAES_ISR_RWEIF_Msk /*!< Read or write error Interrupt flag */ +#define SAES_ISR_KEIF_Pos (2U) +#define SAES_ISR_KEIF_Msk (0x1UL << SAES_ISR_KEIF_Pos) /*!< 0x00000004 */ +#define SAES_ISR_KEIF SAES_ISR_KEIF_Msk /*!< Key error interrupt flag */ +#define SAES_ISR_RNGEIF_Pos (3U) +#define SAES_ISR_RNGEIF_Msk (0x1UL << SAES_ISR_RNGEIF_Pos) /*!< 0x00000008 */ +#define SAES_ISR_RNGEIF SAES_ISR_RNGEIF_Msk /*!< Rng error interrupt flag */ + +/******************* Bits definition for SAES_ICR register ******************/ +#define SAES_ICR_CCF_Pos (0U) +#define SAES_ICR_CCF_Msk (0x1UL << SAES_ICR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_ICR_CCF SAES_ICR_CCF_Msk /*!< Computation complete flag clear */ +#define SAES_ICR_RWEIF_Pos (1U) +#define SAES_ICR_RWEIF_Msk (0x1UL << SAES_ICR_RWEIF_Pos) /*!< 0x00000002 */ +#define SAES_ICR_RWEIF SAES_ICR_RWEIF_Msk /*!< Read or write error Interrupt flag clear */ +#define SAES_ICR_KEIF_Pos (2U) +#define SAES_ICR_KEIF_Msk (0x1UL << SAES_ICR_KEIF_Pos) /*!< 0x00000004 */ +#define SAES_ICR_KEIF SAES_ICR_KEIF_Msk /*!< Key error interrupt flag clear */ +#define SAES_ICR_RNGEIF_Pos (3U) +#define SAES_ICR_RNGEIF_Msk (0x1UL << SAES_ICR_RNGEIF_Pos) /*!< 0x00000008 */ +#define SAES_ICR_RNGEIF SAES_ICR_RNGEIF_Msk /*!< Rng error interrupt flag clear */ + +/******************************************************************************/ +/* */ +/* Serial Audio Interface */ +/* */ +/******************************************************************************/ +/******************** Bit definition for SAI_GCR register *******************/ +#define SAI_GCR_SYNCIN_Pos (0U) +#define SAI_GCR_SYNCIN_Msk (0x3UL << SAI_GCR_SYNCIN_Pos) /*!< 0x00000003 */ +#define SAI_GCR_SYNCIN SAI_GCR_SYNCIN_Msk /*! /*!< ARM Cortex-M7 processor and core peripherals */ +#include "system_stm32h7rsxx.h" /*!< STM32H7RSxx System */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_peripherals + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + uint32_t RESERVED10[4];/*!< Reserved, 0x0B8 - 0x0BC */ + __IO uint32_t OR; /*!< ADC option register, Address offset: 0xC8 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: 0x300 + 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x300 + 0x04 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: 0x300 + 0x08 */ + __IO uint32_t CDR; /*!< ADC common group regular data register Address offset: 0x300 + 0x0C */ +} ADC_Common_TypeDef; + +/** + * @brief AXIM ASIB + */ +typedef struct +{ + uint32_t RESERVED1[9]; /*!< Reserved, Address offset: 0x00-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM ASIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[54]; /*!< Reserved, Address offset: 0x28-0xFC */ + __IO uint32_t READQOS; /*!< AXIM ASIB read_qos register Address offset: 0x100 */ + __IO uint32_t WRITEQOS; /*!< AXIM ASIB write_qos register Address offset: 0x104 */ + __IO uint32_t FNMOD; /*!< AXIM ASIB fn_mod register Address offset: 0x108 */ +} AXIM_ASIB_TypeDef; + +typedef struct +{ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x00-0x04 */ + __IO uint32_t FNMODBMISS; /*!< AXIM AMIB fn_mod_bm_iss register Address offset: 0x08 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x0C-0x20 */ + __IO uint32_t FNMOD2; /*!< AXIM AMIB fn_mod2 register Address offset: 0x24 */ + uint32_t RESERVED3[1]; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t FNMODLB; /*!< AXIM AMIB fn_mod_lb register Address offset: 0x2C */ + uint32_t RESERVED5[54]; /*!< Reserved, Address offset: 0x30-0x104 */ + __IO uint32_t FNMOD; /*!< AXIM AMIB fn_mod register Address offset: 0x108 */ +} AXIM_AMIB_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +} CEC_TypeDef; + +/** + * @brief CORDIC + */ +typedef struct +{ + __IO uint32_t CSR; /*!< CORDIC Control and Status register, Address offset: 0x00 */ + __IO uint32_t WDATA; /*!< CORDIC argument register, Address offset: 0x04 */ + __IO uint32_t RDATA; /*!< CORDIC result register, Address offset: 0x08 */ +} CORDIC_TypeDef; + +/** + * @brief GFXTIM + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXTIM configuration register, Address offset: 0x00 */ + __IO uint32_t CGCR; /*!< GFXTIM clock generator configuration register, Address offset: 0x04 */ + __IO uint32_t TCR; /*!< GFXTIM timers configuration register, Address offset: 0x08 */ + __IO uint32_t TDR; /*!< GFXTIM timers disable register, Address offset: 0x0C */ + __IO uint32_t EVCR; /*!< GFXTIM events control register, Address offset: 0x10 */ + __IO uint32_t EVSR; /*!< GFXTIM events selection register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t WDGTCR; /*!< GFXTIM watchdog timer configuration register, Address offset: 0x20 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t ISR; /*!< GFXTIM interrupt status register, Address offset: 0x30 */ + __IO uint32_t ICR; /*!< GFXTIM interrupt clear register, Address offset: 0x34 */ + __IO uint32_t IER; /*!< GFXTIM interrupt enable register, Address offset: 0x38 */ + __IO uint32_t TSR; /*!< GFXTIM timers status register, Address offset: 0x3C */ + __IO uint32_t LCCRR; /*!< GFXTIM line clock counter reload register, Address offset: 0x40 */ + __IO uint32_t FCCRR; /*!< GFXTIM frame clock counter reload register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x48-0x4C */ + __IO uint32_t ATR; /*!< GFXTIM absolute time register, Address offset: 0x50 */ + __IO uint32_t AFCR; /*!< GFXTIM absolute frame counter register, Address offset: 0x54 */ + __IO uint32_t ALCR; /*!< GFXTIM absolute line counter register, Address offset: 0x58 */ + uint32_t RESERVED4[1]; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t AFCC1R; /*!< GFXTIM absolute frame counter compare 1 register, Address offset: 0x60 */ + uint32_t RESERVED5[3]; /*!< Reserved, Address offset: 0x64-0X6C */ + __IO uint32_t ALCC1R; /*!< GFXTIM absolute line counter compare 1 register, Address offset: 0x70 */ + __IO uint32_t ALCC2R; /*!< GFXTIM absolute line counter compare 2 register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, Address offset: 0x78-0X7C */ + __IO uint32_t RFC1R; /*!< GFXTIM relative frame counter 1 register, Address offset: 0x80 */ + __IO uint32_t RFC1RR; /*!< GFXTIM relative frame counter 1 reload register, Address offset: 0x84 */ + __IO uint32_t RFC2R; /*!< GFXTIM relative frame counter 2 register, Address offset: 0x88 */ + __IO uint32_t RFC2RR; /*!< GFXTIM relative frame counter 2 reload register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x90-0X9C */ + __IO uint32_t WDGCR; /*!< GFXTIM watchdog counter register, Address offset: 0xA0 */ + __IO uint32_t WDGRR; /*!< GFXTIM watchdog reload register, Address offset: 0xA4 */ + __IO uint32_t WDGPAR; /*!< GFXTIM watchdog pre-alarm register, Address offset: 0xA8 */ + uint32_t RESERVED8[209]; /*!< Reserved, Address offset: 0xAC-0X3EC */ + __IO uint32_t HWCFGR; /*!< GFXTIM HW configuration register, Address offset: 0x3F0 */ + __IO uint32_t VERR; /*!< GFXTIM version register, Address offset: 0x3F4 */ + __IO uint32_t IPIDR; /*!< GFXTIM identification register, Address offset: 0x3F8 */ + __IO uint32_t SIDR; /*!< GFXTIM size identification register, Address offset: 0x3FC */ +} GFXTIM_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Cryp Processor + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DIN; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ + __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ + __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ + __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ + __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ + __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ + __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ + __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ + __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ + __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ + __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ + __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ + __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ + __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ + __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ + __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ +} CRYP_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[5]; /*!< Reserved, Address offset: 0x08-0x18 */ + __IO uint32_t AHB5FZR; /*!< Debug MCU AHB5FZR freeze register, Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t AHB1FZR; /*!< Debug MCU AHB1FZR freeze register, Address offset: 0x24 */ + uint32_t RESERVED3[5]; /*!< Reserved, Address offset: 0x28-0x38 */ + __IO uint32_t APB1FZR; /*!< Debug MCU APB1FZR freeze register, Address offset: 0x3C */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x40-0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU APB2FZR freeze register, Address offset: 0x4C */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t APB4FZR; /*!< Debug MCU APB4FZR freeze register, Address offset: 0x54 */ + uint32_t RESERVED6[41]; /*!< Reserved, Address offset: 0x58-0xF8 */ + __IO uint32_t SR; /*!< Debug MCU status register, Address offset: 0xFC */ + __IO uint32_t DBG_AUTH_HOST; /*!< Debug MCU Authentication Host register, Address offset: 0x100 */ + __IO uint32_t DBG_AUTH_DEV; /*!< Debug MCU Authentication Device register, Address offset: 0x104 */ + __IO uint32_t DBG_AUTH_ACK; /*!< Debug MCU Authentication Ack register, Address offset: 0x108 */ + uint32_t RESERVED7[945]; /*!< Reserved, Address offset: 0x10C-0xFCC */ + __IO uint32_t PIDR4; /*!< Debug MCU peripheral identity register 4, Address offset: 0xFD0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xFD4-0xFDC */ + __IO uint32_t PIDR0; /*!< Debug MCU peripheral identity register 0, Address offset: 0xFE0 */ + __IO uint32_t PIDR1; /*!< Debug MCU peripheral identity register 1, Address offset: 0xFE4 */ + __IO uint32_t PIDR2; /*!< Debug MCU peripheral identity register 2, Address offset: 0xFE8 */ + __IO uint32_t PIDR3; /*!< Debug MCU peripheral identity register 3, Address offset: 0xFEC */ + __IO uint32_t CIDR0; /*!< Debug MCU component identity register 0, Address offset: 0xFF0 */ + __IO uint32_t CIDR1; /*!< Debug MCU component identity register 1, Address offset: 0xFF4 */ + __IO uint32_t CIDR2; /*!< Debug MCU component identity register 2, Address offset: 0xFF8 */ + __IO uint32_t CIDR3; /*!< Debug MCU component identity register 3, Address offset: 0xFFC */ +} DBGMCU_TypeDef; + +/** + * @brief DCMIPP + */ +typedef struct +{ + __IO uint32_t IPGR1; /*!< IP-Plug global register 1 Address offset: 0x00 */ + __IO uint32_t IPGR2; /*!< IP-Plug global register 2 Address offset: 0x04 */ + __IO uint32_t IPGR3; /*!< IP-Plug global register 3 Address offset: 0x08 */ + uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x0C-0x18 */ + __IO uint32_t IPGR8; /*!< IP-Plug global register 8 Address offset: 0x1C */ + __IO uint32_t IPC1R1; /*!< IP-Plug client 1 register 1 Address offset: 0x20 */ + __IO uint32_t IPC1R2; /*!< IP-Plug client 1 register 2 Address offset: 0x24 */ + __IO uint32_t IPC1R3; /*!< IP-Plug client 1 register 3 Address offset: 0x28 */ + __IO uint32_t RESERVED2[54]; /*!< Reserved, Address offset: 0x2C-0x100 */ + __IO uint32_t PRCR; /*!< Parallel interface control register Address offset: 0x104 */ + __IO uint32_t PRESCR; /*!< Parallel interface embedded sync code register Address offset: 0x108 */ + __IO uint32_t PRESUR; /*!< Parallel interface embedded sync unmask register Address offset: 0x10C */ + __IO uint32_t RESERVED3[57]; /*!< Reserved, Address offset: 0x110-0x1F0 */ + __IO uint32_t PRIER; /*!< Parallel interface interrupt enable register Address offset: 0x1F4 */ + __IO uint32_t PRSR; /*!< Parallel interface status register Address offset: 0x1F8 */ + __IO uint32_t PRFCR; /*!< Parallel interface interrupt clear register Address offset: 0x1FC */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x200 */ + __IO uint32_t CMCR; /*!< Common configuration register Address offset: 0x204 */ + __IO uint32_t CMFRCR; /*!< Common frame counter register Address offset: 0x208 */ + __IO uint32_t RESERVED5[121]; /*!< Reserved, Address offset: 0x20C-0x3EC */ + __IO uint32_t CMIER; /*!< Common interrupt enable register Address offset: 0x3F0 */ + __IO uint32_t CMSR1; /*!< Common status register 1 Address offset: 0x3F4 */ + __IO uint32_t CMSR2; /*!< Common status register 2 Address offset: 0x3F8 */ + __IO uint32_t CMFCR; /*!< Common interrupt clear register Address offset: 0x3FC */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x400 */ + __IO uint32_t P0FSCR; /*!< Pipe0 flow selection configuration register Address offset: 0x404 */ + __IO uint32_t RESERVED7[62]; /*!< Reserved, Address offset: 0x408-0x4FC */ + __IO uint32_t P0FCTCR; /*!< Pipe0 flow control configuration register Address offset: 0x500 */ + __IO uint32_t P0SCSTR; /*!< Pipe0 stat/crop start register Address offset: 0x504 */ + __IO uint32_t P0SCSZR; /*!< Pipe0 stat/crop size register Address offset: 0x508 */ + __IO uint32_t RESERVED8[41]; /*!< Reserved, Address offset: 0x50C-0x5AC */ + __IO uint32_t P0DCCNTR; /*!< Pipe0 dump counter register Address offset: 0x5B0 */ + __IO uint32_t P0DCLMTR; /*!< Pipe0 dump limit register Address offset: 0x5B4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x5B8-0x5BC */ + __IO uint32_t P0PPCR; /*!< Pipe0 pixel packer configuration register Address offset: 0x5C0 */ + __IO uint32_t P0PPM0AR1; /*!< Pipe0 pixel packer memory0 address register 1 Address offset: 0x5C4 */ + __IO uint32_t P0PPM0AR2; /*!< Pipe0 pixel packer memory0 address register 2 Address offset: 0x5C8 */ + __IO uint32_t RESERVED10[10]; /*!< Reserved, Address offset: 0x5CC-0x5F0 */ + __IO uint32_t P0IER; /*!< Pipe0 interrupt enable register Address offset: 0x5F4 */ + __IO uint32_t P0SR; /*!< Pipe0 status register Address offset: 0x5F8 */ + __IO uint32_t P0FCR; /*!< Pipe0 interrupt clear register Address offset: 0x5FC */ + __IO uint32_t RESERVED11[64]; /*!< Reserved, Address offset: 0x600-0x6FC */ + __IO uint32_t P0CFCTCR; /*!< Pipe0 current flow control configuration register Address offset: 0x700 */ + __IO uint32_t P0CSCSTR; /*!< Pipe0 current stat/crop start register Address offset: 0x704 */ + __IO uint32_t P0CSCSZR; /*!< Pipe0 current stat/crop size register Address offset: 0x708 */ + __IO uint32_t RESERVED12[45]; /*!< Reserved, Address offset: 0x70C-0x7BC */ + __IO uint32_t P0CPPCR; /*!< Pipe0 current pixel packer configuration register Address offset: 0x700 */ + __IO uint32_t P0CPPM0AR1; /*!< Pipe0 current pixel packer memory0 address register 1 Address offset: 0x7C4 */ + __IO uint32_t P0CPPM0AR2; /*!< Pipe0 current pixel packer memory0 address register 2 Address offset: 0x7C8 */ +} DCMIPP_TypeDef; + +/** + * @ brief Delay Block + */ +typedef struct +{ + __IO uint32_t CR; /*!< Delay Block Control Register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< Delay Block Configuration Register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved 1, Address offset: 0x00 */ + __IO uint32_t PRIVCFGR; /*!< DMA privileged configuration register, Address offset: 0x04 */ + __IO uint32_t RCFGLOCKR; /*!< DMA configuration lock register, Address offset: 0x08 */ + __IO uint32_t MISR; /*!< DMA masked interrupt status register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CLBAR; /*!< DMA channel x linked-list base address register, Address offset: 0x50 + (x * 0x80) */ + uint32_t RESERVED1[2]; /*!< Reserved 1, Address offset: 0x54 -- 0x58 */ + __IO uint32_t CFCR; /*!< DMA channel x flag clear register, Address offset: 0x5C + (x * 0x80) */ + __IO uint32_t CSR; /*!< DMA channel x flag status register, Address offset: 0x60 + (x * 0x80) */ + __IO uint32_t CCR; /*!< DMA channel x control register, Address offset: 0x64 + (x * 0x80) */ + uint32_t RESERVED2[10]; /*!< Reserved 2, Address offset: 0x68 -- 0x8C */ + __IO uint32_t CTR1; /*!< DMA channel x transfer register 1, Address offset: 0x90 + (x * 0x80) */ + __IO uint32_t CTR2; /*!< DMA channel x transfer register 2, Address offset: 0x94 + (x * 0x80) */ + __IO uint32_t CBR1; /*!< DMA channel x block register 1, Address offset: 0x98 + (x * 0x80) */ + __IO uint32_t CSAR; /*!< DMA channel x source address register, Address offset: 0x9C + (x * 0x80) */ + __IO uint32_t CDAR; /*!< DMA channel x destination address register, Address offset: 0xA0 + (x * 0x80) */ + __IO uint32_t CTR3; /*!< DMA channel x transfer register 3, Address offset: 0xA4 + (x * 0x80) */ + __IO uint32_t CBR2; /*!< DMA channel x block register 2, Address offset: 0xA8 + (x * 0x80) */ + uint32_t RESERVED3[8]; /*!< Reserved 3, Address offset: 0xAC -- 0xC8 */ + __IO uint32_t CLLR; /*!< DMA channel x linked-list address register, Address offset: 0xCC + (x * 0x80) */ +} DMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, Address offset: 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:0x400-0x7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:0x800-0xBFF */ +} DMA2D_TypeDef; + +/** + * @brief DTS + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< DTS configuration register, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t T0VALR1; /*!< DTS T0 Value register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x0C */ + __IO uint32_t RAMPVALR; /*!< DTS Ramp value register, Address offset: 0x10 */ + __IO uint32_t ITR1; /*!< DTS Interrupt threshold register, Address offset: 0x14 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t DR; /*!< DTS data register, Address offset: 0x1C */ + __IO uint32_t SR; /*!< DTS status register Address offset: 0x20 */ + __IO uint32_t ITENR; /*!< DTS Interrupt enable register, Address offset: 0x24 */ + __IO uint32_t ICIFR; /*!< DTS Clear Interrupt flag register, Address offset: 0x28 */ + __IO uint32_t OR; /*!< DTS option register 1, Address offset: 0x2C */ +} DTS_TypeDef; + +/** + * @brief Ethernet MAC + */ +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACECR; + __IO uint32_t MACPFR; + __IO uint32_t MACWTR; + __IO uint32_t MACHT0R; + __IO uint32_t MACHT1R; + uint32_t RESERVED1[14]; + __IO uint32_t MACVTR; + uint32_t RESERVED2; + __IO uint32_t MACVHTR; + uint32_t RESERVED3; + __IO uint32_t MACVIR; + __IO uint32_t MACIVIR; + uint32_t RESERVED4[2]; + __IO uint32_t MACTFCR; + uint32_t RESERVED5[7]; + __IO uint32_t MACRFCR; + uint32_t RESERVED6[7]; + __IO uint32_t MACISR; + __IO uint32_t MACIER; + __IO uint32_t MACRXTXSR; + uint32_t RESERVED7; + __IO uint32_t MACPCSR; + __IO uint32_t MACRWKPFR; + uint32_t RESERVED8[2]; + __IO uint32_t MACLCSR; + __IO uint32_t MACLTCR; + __IO uint32_t MACLETR; + __IO uint32_t MAC1USTCR; + uint32_t RESERVED9[12]; + __IO uint32_t MACVR; + __IO uint32_t MACDR; + uint32_t RESERVED10; + __IO uint32_t MACHWF0R; + __IO uint32_t MACHWF1R; + __IO uint32_t MACHWF2R; + uint32_t RESERVED11[54]; + __IO uint32_t MACMDIOAR; + __IO uint32_t MACMDIODR; + uint32_t RESERVED12[2]; + __IO uint32_t MACARPAR; + uint32_t RESERVED13[59]; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; + uint32_t RESERVED14[248]; + __IO uint32_t MMCCR; + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; + uint32_t RESERVED15[14]; + __IO uint32_t MMCTSCGPR; + __IO uint32_t MMCTMCGPR; + uint32_t RESERVED16[5]; + __IO uint32_t MMCTPCGR; + uint32_t RESERVED17[10]; + __IO uint32_t MMCRCRCEPR; + __IO uint32_t MMCRAEPR; + uint32_t RESERVED18[10]; + __IO uint32_t MMCRUPGR; + uint32_t RESERVED19[9]; + __IO uint32_t MMCTLPIMSTR; + __IO uint32_t MMCTLPITCR; + __IO uint32_t MMCRLPIMSTR; + __IO uint32_t MMCRLPITCR; + uint32_t RESERVED20[65]; + __IO uint32_t MACL3L4C0R; + __IO uint32_t MACL4A0R; + uint32_t RESERVED21[2]; + __IO uint32_t MACL3A0R0R; + __IO uint32_t MACL3A1R0R; + __IO uint32_t MACL3A2R0R; + __IO uint32_t MACL3A3R0R; + uint32_t RESERVED22[4]; + __IO uint32_t MACL3L4C1R; + __IO uint32_t MACL4A1R; + uint32_t RESERVED23[2]; + __IO uint32_t MACL3A0R1R; + __IO uint32_t MACL3A1R1R; + __IO uint32_t MACL3A2R1R; + __IO uint32_t MACL3A3R1R; + uint32_t RESERVED24[108]; + __IO uint32_t MACTSCR; + __IO uint32_t MACSSIR; + __IO uint32_t MACSTSR; + __IO uint32_t MACSTNR; + __IO uint32_t MACSTSUR; + __IO uint32_t MACSTNUR; + __IO uint32_t MACTSAR; + uint32_t RESERVED25; + __IO uint32_t MACTSSR; + uint32_t RESERVED26[3]; + __IO uint32_t MACTTSSNR; + __IO uint32_t MACTTSSSR; + uint32_t RESERVED27[2]; + __IO uint32_t MACACR; + uint32_t RESERVED28; + __IO uint32_t MACATSNR; + __IO uint32_t MACATSSR; + __IO uint32_t MACTSIACR; + __IO uint32_t MACTSEACR; + __IO uint32_t MACTSICNR; + __IO uint32_t MACTSECNR; + uint32_t RESERVED29[4]; + __IO uint32_t MACPPSCR; + uint32_t RESERVED30[3]; + __IO uint32_t MACPPSTTSR; + __IO uint32_t MACPPSTTNR; + __IO uint32_t MACPPSIR; + __IO uint32_t MACPPSWR; + uint32_t RESERVED31[12]; + __IO uint32_t MACPOCR; + __IO uint32_t MACSPI0R; + __IO uint32_t MACSPI1R; + __IO uint32_t MACSPI2R; + __IO uint32_t MACLMIR; + uint32_t RESERVED32[11]; + __IO uint32_t MTLOMR; + uint32_t RESERVED33[7]; + __IO uint32_t MTLISR; + uint32_t RESERVED34[55]; + __IO uint32_t MTLTQOMR; + __IO uint32_t MTLTQUR; + __IO uint32_t MTLTQDR; + uint32_t RESERVED35[8]; + __IO uint32_t MTLQICSR; + __IO uint32_t MTLRQOMR; + __IO uint32_t MTLRQMPOCR; + __IO uint32_t MTLRQDR; + uint32_t RESERVED36[177]; + __IO uint32_t DMAMR; + __IO uint32_t DMASBMR; + __IO uint32_t DMAISR; + __IO uint32_t DMADSR; + uint32_t RESERVED37[60]; + __IO uint32_t DMACCR; + __IO uint32_t DMACTCR; + __IO uint32_t DMACRCR; + uint32_t RESERVED38[2]; + __IO uint32_t DMACTDLAR; + uint32_t RESERVED39; + __IO uint32_t DMACRDLAR; + __IO uint32_t DMACTDTPR; + uint32_t RESERVED40; + __IO uint32_t DMACRDTPR; + __IO uint32_t DMACTDRLR; + __IO uint32_t DMACRDRLR; + __IO uint32_t DMACIER; + __IO uint32_t DMACRIWTR; +__IO uint32_t DMACSFCSR; + uint32_t RESERVED41; + __IO uint32_t DMACCATDR; + uint32_t RESERVED42; + __IO uint32_t DMACCARDR; + uint32_t RESERVED43; + __IO uint32_t DMACCATBR; + uint32_t RESERVED44; + __IO uint32_t DMACCARBR; + __IO uint32_t DMACSR; +uint32_t RESERVED45[2]; +__IO uint32_t DMACMFCR; +}ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x08 */ + uint32_t RESERVED1[5]; /*!< Reserved 1, Address offset: 0x0C-0x1C */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x28 */ + uint32_t RESERVED2[21]; /*!< Reserved 2, Address offset: 0x2C-0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x84 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x88 */ + uint32_t RESERVED3; /*!< Reserved 3, Address offset: 0x8C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x94 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x98 */ + uint32_t RESERVED4; /*!< Reserved 4, Address offset: 0x9C */ + __IO uint32_t IMR3; /*!< EXTI Interrupt mask register 3, Address offset: 0xA0 */ + __IO uint32_t EMR3; /*!< EXTI Event mask register 3, Address offset: 0xA4 */ +} EXTI_TypeDef; + +/** + * @brief FD Controller Area Network + */ +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t RXGFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x084 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x088 */ + uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x090 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x094 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x098 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x09C */ + uint32_t RESERVED6[8]; /*!< Reserved, 0x0A0 - 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0C8 */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0CC */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D4 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0D8 */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0DC */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0E4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0E8 */ +} FDCAN_GlobalTypeDef; + +/** + * @brief FD Controller Area Network Configuration + */ +typedef struct +{ + __IO uint32_t CKDIV; /*!< FDCAN clock divider register, Address offset: 0x100 + 0x000 */ + uint32_t RESERVED1[128];/*!< Reserved, 0x100 + 0x004 - 0x100 + 0x200 */ + __IO uint32_t OPTR; /*!< FDCAN option register, Address offset: 0x100 + 0x204 */ + uint32_t RESERVED2[58]; /*!< Reserved, 0x100 + 0x208 - 0x100 + 0x2EC */ + __IO uint32_t HWCFG; /*!< FDCAN hardware configuration register, Address offset: 0x100 + 0x2F0 */ + __IO uint32_t VERR; /*!< FDCAN IP version register, Address offset: 0x100 + 0x2F4 */ + __IO uint32_t IPIDR; /*!< FDCAN IP ID register, Address offset: 0x100 + 0x2F8 */ + __IO uint32_t SIDR; /*!< FDCAN size ID register, Address offset: 0x100 + 0x2FC */ +} FDCAN_Config_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x000 */ + __IO uint32_t KEYR; /*!< FLASH control key register, Address offset: 0x004 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x008 - 0x00C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x010 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t IER; /*!< FLASH interrupt enable register, Address offset: 0x020 */ + __IO uint32_t ISR; /*!< FLASH interrupt status register, Address offset: 0x024 */ + __IO uint32_t ICR; /*!< FLASH interrupt clear register, Address offset: 0x028 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x02C */ + __IO uint32_t CRCCR; /*!< FLASH CRC control register, Address offset: 0x030 */ + __IO uint32_t CRCSADDR; /*!< FLASH CRC start address register, Address offset: 0x034 */ + __IO uint32_t CRCEADDR; /*!< FLASH CRC end address register, Address offset: 0x038 */ + __IO uint32_t CRCDATAR; /*!< FLASH CRC data register, Address offset: 0x03C */ + __IO uint32_t ECCSFADDR; /*!< FLASH ECC single fail address register, Address offset: 0x040 */ + __IO uint32_t ECCDFADDR; /*!< FLASH ECC double fail address register, Address offset: 0x044 */ + uint32_t RESERVED4[46]; /*!< Reserved, Address offset: 0x048 - 0x0FC */ + __IO uint32_t OPTKEYR; /*!< FLASH options key register, Address offset: 0x100 */ + __IO uint32_t OPTCR; /*!< FLASH options control register, Address offset: 0x104 */ + __IO uint32_t OPTISR; /*!< FLASH options interrupt status register, Address offset: 0x108 */ + __IO uint32_t OPTICR; /*!< FLASH options interrupt clear register, Address offset: 0x10C */ + __IO uint32_t OBKCR; /*!< FLASH option byte key control register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x114 */ + __IO uint32_t OBKDR[8]; /*!< FLASH option bytes key data register, Address offset: 0x118 - 0x134 */ + uint32_t RESERVED6[50]; /*!< Reserved, Address offset: 0x138 - 0x1FC */ + __IO uint32_t NVSR; /*!< FLASH non-volatile status register, Address offset: 0x200 */ + __IO uint32_t NVSRP; /*!< FLASH security status register programming, Address offset: 0x204 */ + __IO uint32_t ROTSR; /*!< FLASH RoT status register, Address offset: 0x208 */ + __IO uint32_t ROTSRP; /*!< FLASH RoT status register programming, Address offset: 0x20C */ + __IO uint32_t OTPLSR; /*!< FLASH OTP lock status register, Address offset: 0x210 */ + __IO uint32_t OTPLSRP; /*!< FLASH OTP lock status programming register, Address offset: 0x214 */ + __IO uint32_t WRPSR; /*!< FLASH write protection status register, Address offset: 0x218 */ + __IO uint32_t WRPSRP; /*!< FLASH write protection status register programming, Address offset: 0x21C */ + uint32_t RESERVED7[4]; /*!< Reserved, Address offset: 0x220 - 0x22C */ + __IO uint32_t HDPSR; /*!< FLASH hide protection status register, Address offset: 0x230 */ + __IO uint32_t HDPSRP; /*!< FLASH hide protection status register programming, Address offset: 0x234 */ + uint32_t RESERVED8[6]; /*!< Reserved, Address offset: 0x238 - 0x24C */ + __IO uint32_t EPOCHSR; /*!< FLASH epoch status register, Address offset: 0x250 */ + __IO uint32_t EPOCHSRP; /*!< FLASH epoch status register programming, Address offset: 0x254 */ + uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0x258 - 0x25C */ + __IO uint32_t OBW1SR; /*!< FLASH option byte word 1 status register, Address offset: 0x260 */ + __IO uint32_t OBW1SRP; /*!< FLASH option byte word 1 status register programming, Address offset: 0x264 */ + __IO uint32_t OBW2SR; /*!< FLASH option byte word 2 status register, Address offset: 0x268 */ + __IO uint32_t OBW2SRP; /*!< FLASH option byte word 2 status register programming, Address offset: 0x26C */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 + */ +typedef struct { + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1 Extended + */ +typedef struct { + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ +typedef struct { + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 & 6 + */ +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140 - 0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148 - 0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief GFXMMU + */ +typedef struct +{ + __IO uint32_t CR; /*!< GFXMMU configuration register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< GFXMMU status register, Address offset: 0x04 */ + __IO uint32_t FCR; /*!< GFXMMU flag clear register, Address offset: 0x08 */ + uint32_t RESERVED0; /*!< Reserved0, Address offset: 0x0C */ + __IO uint32_t DVR; /*!< GFXMMU default value register, Address offset: 0x10 */ + __IO uint32_t DAR; /*!< GFXMMU default alpha register, Address offset: 0x14 */ + uint32_t RESERVED1[2]; /*!< Reserved1, Address offset: 0x18 to 0x1C */ + __IO uint32_t B0CR; /*!< GFXMMU buffer 0 configuration register, Address offset: 0x20 */ + __IO uint32_t B1CR; /*!< GFXMMU buffer 1 configuration register, Address offset: 0x24 */ + __IO uint32_t B2CR; /*!< GFXMMU buffer 2 configuration register, Address offset: 0x28 */ + __IO uint32_t B3CR; /*!< GFXMMU buffer 3 configuration register, Address offset: 0x2C */ + uint32_t RESERVED2[1012]; /*!< Reserved2, Address offset: 0x30 to 0xFFC */ + __IO uint32_t LUT[2048]; /*!< GFXMMU LUT registers, Address offset: 0x1000 to 0x2FFC + For LUT line i, LUTiL = LUT[2*i] and LUTiH = LUT[(2*i)+1] */ +} GFXMMU_TypeDef; + +/** + * @brief HASH + */ +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[103]; /*!< HASH context swap registers, Address offset: 0x0F8-0x290 */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ +typedef struct +{ + __IO uint32_t HR[16]; /*!< HASH digest registers, Address offset: 0x310-0x34C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Improved Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< I3C Control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< I3C Controller Configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x08-0x0C */ + __IO uint32_t RDR; /*!< I3C Received Data register, Address offset: 0x10 */ + __IO uint32_t RDWR; /*!< I3C Received Data Word register, Address offset: 0x14 */ + __IO uint32_t TDR; /*!< I3C Transmit Data register, Address offset: 0x18 */ + __IO uint32_t TDWR; /*!< I3C Transmit Data Word register, Address offset: 0x1C */ + __IO uint32_t IBIDR; /*!< I3C IBI payload Data register, Address offset: 0x20 */ + __IO uint32_t TGTTDR; /*!< I3C Target Transmit register, Address offset: 0x24 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x28-0x2C */ + __IO uint32_t SR; /*!< I3C Status register, Address offset: 0x30 */ + __IO uint32_t SER; /*!< I3C Status Error register, Address offset: 0x34 */ + uint32_t RESERVED3[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t RMR; /*!< I3C Received Message register, Address offset: 0x40 */ + uint32_t RESERVED4[3]; /*!< Reserved, Address offset: 0x44-0x4C */ + __IO uint32_t EVR; /*!< I3C Event register, Address offset: 0x50 */ + __IO uint32_t IER; /*!< I3C Interrupt Enable register, Address offset: 0x54 */ + __IO uint32_t CEVR; /*!< I3C Clear Event register, Address offset: 0x58 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t DEVR0; /*!< I3C own Target characteristics register, Address offset: 0x60 */ + __IO uint32_t DEVRX[4]; /*!< I3C Target x (1<=x<=4) register, Address offset: 0x64-0x70 */ + uint32_t RESERVED6[7]; /*!< Reserved, Address offset: 0x74-0x8C */ + __IO uint32_t MAXRLR; /*!< I3C Maximum Read Length register, Address offset: 0x90 */ + __IO uint32_t MAXWLR; /*!< I3C Maximum Write Length register, Address offset: 0x94 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0x98-0x9C */ + __IO uint32_t TIMINGR0; /*!< I3C Timing 0 register, Address offset: 0xA0 */ + __IO uint32_t TIMINGR1; /*!< I3C Timing 1 register, Address offset: 0xA4 */ + __IO uint32_t TIMINGR2; /*!< I3C Timing 2 register, Address offset: 0xA8 */ + uint32_t RESERVED9[5]; /*!< Reserved, Address offset: 0xAC-0xBC */ + __IO uint32_t BCR; /*!< I3C Bus Characteristics register, Address offset: 0xC0 */ + __IO uint32_t DCR; /*!< I3C Device Characteristics register, Address offset: 0xC4 */ + __IO uint32_t GETCAPR; /*!< I3C GET CAPabilities register, Address offset: 0xC8 */ + __IO uint32_t CRCAPR; /*!< I3C Controller CAPabilities register, Address offset: 0xCC */ + __IO uint32_t GETMXDSR; /*!< I3C GET Max Data Speed register, Address offset: 0xD0 */ + __IO uint32_t EPIDR; /*!< I3C Extended Provisioned ID register, Address offset: 0xD4 */ +} I3C_TypeDef; + + +/** + * @brief Instruction Cache + */ + +typedef struct +{ + __IO uint32_t CR; /*!< ICACHE control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< ICACHE status register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< ICACHE interrupt enable register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< ICACHE flag clear register, Address offset: 0x0C */ + __IO uint32_t HMONR; /*!< ICACHE hit monitor register, Address offset: 0x10 */ + __IO uint32_t MMONR; /*!< ICACHE miss monitor register, Address offset: 0x14 */ +} ICACHE_TypeDef; + +/** + * @brief IWDG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ + __IO uint32_t EWCR; /*!< IWDG Early Wakeup register, Address offset: 0x14 */ +} IWDG_TypeDef; + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 0x00 */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 0x04 */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 0x08 */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0x0C */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 0x10 */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 0x14 */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 0x18 */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 0x1C */ + uint32_t RESERVED0[4]; /* Reserved Address offset: 0x20-0x2C */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 0x30 */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 0x34 */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 0x38 */ + uint32_t RESERVED1; /* Reserved Address offset: 0x3C */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 0x40 */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 0x44 */ + uint32_t RESERVED2[2]; /* Reserved Address offset: 0x48-0x4C */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 0x50-0x8C */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 0x90-0xCC */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: 0xD0-0x10C */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 0x110-0x14C */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 0x150-0x18C */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 0x190-0x20C */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 0x210-0x35C */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 0x360-0x4F8 */ + uint32_t RESERVED3; /* Reserved Address offset: 0x4FC */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 0x500-0x65C */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 0x660-0x7BC */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 0x7C0-0x7DC */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 0x7E0-0x7FC */ +} JPEG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t DIER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< LPTIM Capture/Compare register 1, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register 2, Address offset: 0x24 */ + __IO uint32_t RCR; /*!< LPTIM Repetition register, Address offset: 0x28 */ + __IO uint32_t CCMR1; /*!< LPTIM Capture/Compare mode register, Address offset: 0x2C */ + __IO uint32_t RESERVED1; /*!< Reserved, Address offset: 0x30 */ + __IO uint32_t CCR2; /*!< LPTIM Capture/Compare register 2, Address offset: 0x34 */ +} LPTIM_TypeDef; + +/** + * @brief Memory Cipher Engine (MCE) + */ +typedef struct +{ + __IO uint32_t REGCR; /*!< MCE region configuration register, Address offset: 0x040 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t SADDR; /*!< MCE region start address register, Address offset: 0x044 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t EADDR; /*!< MCE region end address register, Address offset: 0x048 + 0x10 * (x-1) (x = 1 to 4) */ + __IO uint32_t ATTR; /*!< MCE region attribute register, Address offset: 0x04C + 0x10 * (x-1) (x = 1 to 4) */ +} MCE_Region_TypeDef; + +typedef struct +{ + __IO uint32_t CCCFGR; /*!< MCE cipher context configuration register, Address offset: 0x240 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCNR0; /*!< MCE cipher context nonce register 0, Address offset: 0x244 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCNR1; /*!< MCE cipher context nonce register 1, Address offset: 0x248 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR0; /*!< MCE cipher context key register 0, Address offset: 0x24C + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR1; /*!< MCE cipher context key register 1, Address offset: 0x250 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR2; /*!< MCE cipher context key register 2, Address offset: 0x254 + 0x30 * (x-1) (x = 1 to 2) */ + __IO uint32_t CCKEYR3; /*!< MCE cipher context key register 3, Address offset: 0x258 + 0x30 * (x-1) (x = 1 to 2) */ +} MCE_Context_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< MCE configuration register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< MCE status register, Address offset: 0x004 */ + __IO uint32_t IASR; /*!< MCE illegal access status register, Address offset: 0x008 */ + __IO uint32_t IACR; /*!< MCE illegal access clear register, Address offset: 0x00C */ + __IO uint32_t IAIER; /*!< MCE illegal access interrupt enable register, Address offset: 0x010 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x014-0x018 */ + __IO uint32_t PRIVCFGR; /*!< MCE privileged configuration register, Address offset: 0x01C */ + __IO uint32_t IAESR; /*!< MCE illegal access error status register, Address offset: 0x020 */ + __IO uint32_t IADDR; /*!< MCE illegal address register, Address offset: 0x024 */ + uint32_t RESERVED2[118]; /*!< Reserved, Address offset: 0x028-0x1FC */ + __IO uint32_t MKEYR0; /*!< MCE master key register 0, Address offset: 0x200 */ + __IO uint32_t MKEYR1; /*!< MCE master key register 1, Address offset: 0x204 */ + __IO uint32_t MKEYR2; /*!< MCE master key register 2, Address offset: 0x208 */ + __IO uint32_t MKEYR3; /*!< MCE master key register 3, Address offset: 0x20C */ + uint32_t RESERVED3[4]; /*!< Reserved, Address offset: 0x210-0x21C */ + __IO uint32_t FMKEYR0; /*!< MCE fast master key register 0, Address offset: 0x220 */ + __IO uint32_t FMKEYR1; /*!< MCE fast master key register 1, Address offset: 0x224 */ + __IO uint32_t FMKEYR2; /*!< MCE fast master key register 2, Address offset: 0x228 */ + __IO uint32_t FMKEYR3; /*!< MCE fast master key register 3, Address offset: 0x22C */ +} MCE_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + +/** + * @brief ADF + */ +typedef struct +{ + __IO uint32_t GCR; /*!< MDF Global Control register, Address offset: 0x00 */ + __IO uint32_t CKGCR; /*!< MDF Clock Generator Control Register, Address offset: 0x04 */ +} MDF_TypeDef; + +/** + * @brief ADF filter + */ +typedef struct +{ + __IO uint32_t SITFCR; /*!< MDF Serial Interface Control Register, Address offset: 0x80 */ + __IO uint32_t BSMXCR; /*!< MDF Bitstream Matrix Control Register, Address offset: 0x84 */ + __IO uint32_t DFLTCR; /*!< MDF Digital Filter Control Register, Address offset: 0x88 */ + __IO uint32_t DFLTCICR; /*!< MDF MCIC Configuration Register, Address offset: 0x8C */ + __IO uint32_t DFLTRSFR; /*!< MDF Reshape Filter Configuration Register, Address offset: 0x90 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x94-0xA0 */ + __IO uint32_t DLYCR; /*!< MDF Delay control Register, Address offset: 0xA4 */ + uint32_t RESERVED1[1]; /*!< Reserved, 0xA8 */ + __IO uint32_t DFLTIER; /*!< MDF DFLT Interrupt enable Register, Address offset: 0xAC */ + __IO uint32_t DFLTISR; /*!< MDF DFLT Interrupt status Register, Address offset: 0xB0 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0xB4 */ + __IO uint32_t SADCR; /*!< MDF SAD Control Register, Address offset: 0xB8 */ + __IO uint32_t SADCFGR; /*!< MDF SAD configuration register, Address offset: 0xBC */ + __IO uint32_t SADSDLVR; /*!< MDF SAD Sound level Register, Address offset: 0xC0 */ + __IO uint32_t SADANLVR; /*!< MDF SAD Ambient Noise level Register, Address offset: 0xC4 */ + uint32_t RESERVED3[10]; /*!< Reserved, 0xC8-0xEC */ + __IO uint32_t DFLTDR; /*!< MDF Digital Filter Data Register, Address offset: 0xF0 */ +} MDF_Filter_TypeDef; + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved, 0xA4-0xA8 */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved, 0xB8-0xC0 */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0xC4 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief XSPI + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPI Control Register, Address offset: 0x000 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x004 */ + __IO uint32_t DCR1; /*!< XSPI Device Configuration Register 1, Address offset: 0x008 */ + __IO uint32_t DCR2; /*!< XSPI Device Configuration Register 2, Address offset: 0x00C */ + __IO uint32_t DCR3; /*!< XSPI Device Configuration Register 3, Address offset: 0x010 */ + __IO uint32_t DCR4; /*!< XSPI Device Configuration Register 4, Address offset: 0x014 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x018 - 0x01C */ + __IO uint32_t SR; /*!< XSPI Status Register, Address offset: 0x020 */ + __IO uint32_t FCR; /*!< XSPI Flag Clear Register, Address offset: 0x024 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x028 - 0x03C */ + __IO uint32_t DLR; /*!< XSPI Data Length Register, Address offset: 0x040 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x044 */ + __IO uint32_t AR; /*!< XSPI Address Register, Address offset: 0x048 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x04C */ + __IO uint32_t DR; /*!< XSPI Data Register, Address offset: 0x050 */ + uint32_t RESERVED6[11]; /*!< Reserved, Address offset: 0x054 - 0x07C */ + __IO uint32_t PSMKR; /*!< XSPI Polling Status Mask Register, Address offset: 0x080 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x084 */ + __IO uint32_t PSMAR; /*!< XSPI Polling Status Match Register, Address offset: 0x088 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0x08C */ + __IO uint32_t PIR; /*!< XSPI Polling Interval Register, Address offset: 0x090 */ + uint32_t RESERVED9[27]; /*!< Reserved, Address offset: 0x094 - 0x0FC */ + __IO uint32_t CCR; /*!< XSPI Communication Configuration Register, Address offset: 0x100 */ + uint32_t RESERVED10; /*!< Reserved, Address offset: 0x104 */ + __IO uint32_t TCR; /*!< XSPI Timing Configuration Register, Address offset: 0x108 */ + uint32_t RESERVED11; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t IR; /*!< XSPI Instruction Register, Address offset: 0x110 */ + uint32_t RESERVED12[3]; /*!< Reserved, Address offset: 0x114 - 0x11C */ + __IO uint32_t ABR; /*!< XSPI Alternate Bytes Register, Address offset: 0x120 */ + uint32_t RESERVED13[3]; /*!< Reserved, Address offset: 0x124 - 0x12C */ + __IO uint32_t LPTR; /*!< XSPI Low-Power Timeout Register, Address offset: 0x130 */ + uint32_t RESERVED14[3]; /*!< Reserved, Address offset: 0x134 - 0x13C */ + __IO uint32_t WPCCR; /*!< XSPI Wrap Communication Configuration Register, Address offset: 0x140 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x144 */ + __IO uint32_t WPTCR; /*!< XSPI Wrap Timing Configuration Register, Address offset: 0x148 */ + uint32_t RESERVED16; /*!< Reserved, Address offset: 0x14C */ + __IO uint32_t WPIR; /*!< XSPI Wrap Instruction Register, Address offset: 0x150 */ + uint32_t RESERVED17[3]; /*!< Reserved, Address offset: 0x154 - 0x15C */ + __IO uint32_t WPABR; /*!< XSPI Wrap Alternate Bytes Register, Address offset: 0x160 */ + uint32_t RESERVED18[7]; /*!< Reserved, Address offset: 0x164 - 0x17C */ + __IO uint32_t WCCR; /*!< XSPI Write Communication Configuration Register, Address offset: 0x180 */ + uint32_t RESERVED19; /*!< Reserved, Address offset: 0x184 */ + __IO uint32_t WTCR; /*!< XSPI Write Timing Configuration Register, Address offset: 0x188 */ + uint32_t RESERVED20; /*!< Reserved, Address offset: 0x18C */ + __IO uint32_t WIR; /*!< XSPI Write Instruction Register, Address offset: 0x190 */ + uint32_t RESERVED21[3]; /*!< Reserved, Address offset: 0x194 - 0x19C */ + __IO uint32_t WABR; /*!< XSPI Write Alternate Bytes Register, Address offset: 0x1A0 */ + uint32_t RESERVED22[23]; /*!< Reserved, Address offset: 0x1A4 - 0x1FC */ + __IO uint32_t HLCR; /*!< XSPI HyperBus Latency Configuration Register, Address offset: 0x200 */ + uint32_t RESERVED23[3]; /*!< Reserved, Address offset: 0x204 - 0x20C */ + __IO uint32_t CALFCR; /*!< XSPI Full-Cycle Calibration Configuration Register, Address offset: 0x210 */ + uint32_t RESERVED24; /*!< Reserved, Address offset: 0x214 */ + __IO uint32_t CALMR; /*!< XSPI DLL Master Calibration Configuration Register, Address offset: 0x218 */ + uint32_t RESERVED25; /*!< Reserved, Address offset: 0x21C */ + __IO uint32_t CALSOR; /*!< XSPI Slave Output Calibration Configuration Register, Address offset: 0x220 */ + uint32_t RESERVED26; /*!< Reserved, Address offset: 0x224 */ + __IO uint32_t CALSIR; /*!< XSPI Slave Input Calibration Configuration Register, Address offset: 0x228 */ +} XSPI_TypeDef; + +/** + * @brief XSPI IO Manager + */ +typedef struct +{ + __IO uint32_t CR; /*!< XSPIM IO Manager Control Register, Address offset: 0x00 */ +} XSPIM_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x04 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control status register 2, Address offset: 0x0C */ + __IO uint32_t CSR3; /*!< PWR power control status register 3, Address offset: 0x10 */ + __IO uint32_t CSR4; /*!< PWR power control status register 4, Address offset: 0x14 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ + __IO uint32_t UCPDR; /*!< PWR USB Type-C and power delivery register, Address offset: 0x2C */ + __IO uint32_t APCR; /*!< PWR apply pull configuration register, Address offset: 0x30 */ + __IO uint32_t PUCRN; /*!< PWR port N pull-up control register, Address offset: 0x34 */ + __IO uint32_t PDCRN; /*!< PWR port N pull-down control register, Address offset: 0x38 */ + __IO uint32_t PUCRO; /*!< PWR port O pull-up control register, Address offset: 0x3C */ + __IO uint32_t PDCRO; /*!< PWR port O pull-down control register, Address offset: 0x40 */ + __IO uint32_t PDCRP; /*!< PWR port P pull-down control register, Address offset: 0x44 */ + uint32_t RESERVED2[2]; /*!< Reserved */ + __IO uint32_t PDR1; /*!< PWR debug register 1, Address offset: 0x50 */ +} PWR_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved, Address offset: 0x000C-0x03FC */ + __IO uint32_t RAM[1334]; /*!< PKA RAM Address offset: 0x0400-0x18D8 */ +} PKA_TypeDef; + +/** + * @brief PSSI + */ +typedef struct +{ + __IO uint32_t CR; /*!< PSSI control register, Address offset: 0x000 */ + __IO uint32_t SR; /*!< PSSI status register, Address offset: 0x004 */ + __IO uint32_t RIS; /*!< PSSI raw interrupt status register, Address offset: 0x008 */ + __IO uint32_t IER; /*!< PSSI interrupt enable register, Address offset: 0x00C */ + __IO uint32_t MIS; /*!< PSSI masked interrupt status register, Address offset: 0x010 */ + __IO uint32_t ICR; /*!< PSSI interrupt clear register, Address offset: 0x014 */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x018 - 0x024 */ + __IO uint32_t DR; /*!< PSSI data register, Address offset: 0x028 */ +} PSSI_TypeDef; + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI clock calibration register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock recovery RC register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI clock calibration register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CDCFGR; /*!< RCC CPU domain configuration register, Address offset: 0x18 */ + __IO uint32_t BMCFGR; /*!< RCC Bus matrix configuration register, Address offset: 0x1C */ + __IO uint32_t APBCFGR; /*!< RCC APB clock configuration register, Address offset: 0x20 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs clock source selection register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs configuration register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR1; /*!< RCC PLL1 dividers configuration register 1, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 fractional divider configuration register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR1; /*!< RCC PLL2 dividers configuration register 1, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 fractional divider configuration register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR1; /*!< RCC PLL3 dividers configuration register 1, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 fractional divider configuration register, Address offset: 0x44 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t CCIPR1; /*!< RCC AHB peripherals kernel clock configuration register Address offset: 0x4C */ + __IO uint32_t CCIPR2; /*!< RCC APB1 peripherals kernel clock configuration register Address offset: 0x50 */ + __IO uint32_t CCIPR3; /*!< RCC APB2 peripherals kernel clock configuration register Address offset: 0x54 */ + __IO uint32_t CCIPR4; /*!< RCC APB4/APB5 peripherals kernel clock configuration register Address offset: 0x58 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x68 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB5RSTR; /*!< RCC AHB5 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB5RSTR; /*!< RCC APB5 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x90 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0xA0 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0xA4 */ + uint32_t RESERVED7[2]; /*!< Reserved, Address offset: 0xA8-0xAC */ + __IO uint32_t CKGDISR ; /*!< RCC AXI clocks gating disable register, Address offset: 0xB0 */ + uint32_t RESERVED8[3]; /*!< Reserved, Address offset: 0xB4-0xBC */ + __IO uint32_t PLL1DIVR2; /*!< RCC PLL1 dividers configuration register 2, Address offset: 0xC0 */ + __IO uint32_t PLL2DIVR2; /*!< RCC PLL2 dividers configuration register 2, Address offset: 0xC4 */ + __IO uint32_t PLL3DIVR2; /*!< RCC PLL3 dividers configuration register 2, Address offset: 0xC8 */ + __IO uint32_t PLL1SSCGR; /*!< RCC PLL1 spread spectrum clock generator register, Address offset: 0xCC */ + __IO uint32_t PLL2SSCGR; /*!< RCC PLL2 spread spectrum clock generator register, Address offset: 0xD0 */ + __IO uint32_t PLL3SSCGR; /*!< RCC PLL3 spread spectrum clock generator register, Address offset: 0xD4 */ + uint32_t RESERVED9[10]; /*!< Reserved, Address offset: 0xD8-0xFC */ + __IO uint32_t CKPROTR; /*!< RCC clock protection register, Address offset: 0x100 */ + uint32_t RESERVED10[11]; /*!< Reserved, Address offset: 0x104-0x12C */ + __IO uint32_t RSR; /*!< RCC reset status register, Address offset: 0x130 */ + __IO uint32_t AHB5ENR; /*!< RCC AHB5 peripheral clocks enable register, Address offset: 0x134 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x138 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x13C */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clocks enable register, Address offset: 0x140 */ + __IO uint32_t APB5ENR; /*!< RCC APB5 peripheral clocks enable register, Address offset: 0x144 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x148 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x14C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x150 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clocks enable register, Address offset: 0x154 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x158 */ + __IO uint32_t AHB5LPENR; /*!< RCC AHB5 peripheral sleep clocks enable register, Address offset: 0x15C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clocks enable register, Address offset: 0x160 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clocks enable register, Address offset: 0x164 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clocks enable register, Address offset: 0x168 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clocks enable register, Address offset: 0x16C */ + __IO uint32_t APB1LPENR1; /*!< RCC APB1 peripheral sleep clocks enable register 1, Address offset: 0x170 */ + __IO uint32_t APB1LPENR2; /*!< RCC APB1 peripheral sleep clocks enable register 2, Address offset: 0x174 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clocks enable register, Address offset: 0x178 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clocks enable register, Address offset: 0x17C */ + __IO uint32_t APB5LPENR; /*!< RCC APB5 peripheral sleep clocks enable register, Address offset: 0x180 */ +} RCC_TypeDef; + +/** + * @brief Random Number Generator + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ + uint32_t RESERVED; + __IO uint32_t HTCR; /*!< RNG health test configuration register, Address offset: 0x10 */ +} RNG_TypeDef; + +/* +* @brief RTC Specific device feature definitions +*/ +#define RTC_BKP_NB 32U +#define RTC_TAMP_NB 8U + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + __IO uint32_t PRIVCFGR; /*!< RTC privilege mode control register, Address offset: 0x1C */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x3C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC masked interrupt status register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC status Clear register, Address offset: 0x5C */ + uint32_t RESERVED3[4];/*!< Reserved, Address offset: 0x58 */ + __IO uint32_t ALRABINR; /*!< RTC alarm A binary mode register, Address offset: 0x70 */ + __IO uint32_t ALRBBINR; /*!< RTC alarm B binary mode register, Address offset: 0x74 */ +} RTC_TypeDef; + +/** + * @brief SAES Processor + */ +typedef struct +{ + __IO uint32_t CR; /*!< SAES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< SAES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< SAES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< SAES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< SAES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< SAES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< SAES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< SAES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< SAES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< SAES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< SAES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< SAES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< SAES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< SAES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< SAES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< SAES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< SAES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< SAES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< SAES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< SAES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< SAES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< SAES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< SAES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< SAES Suspend register 7, Address offset: 0x5C */ + uint32_t RESERVED1[168]; /*!< Reserved, Address offset: 0x60 -- 0x2FC */ + __IO uint32_t IER; /*!< SAES Interrupt Enable Register, Address offset: 0x300 */ + __IO uint32_t ISR; /*!< SAES Interrupt Status Register, Address offset: 0x304 */ + __IO uint32_t ICR; /*!< SAES Interrupt Clear Register, Address offset: 0x308 */ +} SAES_TypeDef; + +/** + * @brief Serial Audio Interface + */ +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED[16]; /*!< Reserved, Address offset: 0x04 to 0x40 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief System configuration, boot and security controller + */ +typedef struct +{ + __IO uint32_t BOOTSR; /*!< SBS Boot Status register, Address offset: 0x00 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x04-0x0C */ + __IO uint32_t HDPLCR; /*!< SBS Hide Protection Control register, Address offset: 0x10 */ + __IO uint32_t HDPLSR; /*!< SBS Hide Protection Status register, Address offset: 0x14 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x18-0x1C */ + __IO uint32_t DBGCR; /*!< SBS Debug Control register, Address offset: 0x20 */ + __IO uint32_t DBGLOCKR; /*!< SBS Debug Lock register, Address offset: 0x24 */ + uint32_t RESERVED3[3]; /*!< Reserved, Address offset: 0x28-0x30 */ + __IO uint32_t RSSCMDR; /*!< SBS RSS Command register, Address offset: 0x34 */ + uint32_t RESERVED4[50]; /*!< Reserved, Address offset: 0x38-0xFC */ + __IO uint32_t PMCR; /*!< SBS Product Mode & Config register, Address offset: 0x100 */ + __IO uint32_t FPUIMR; /*!< SBS FPU Interrupt Mask register, Address offset: 0x104 */ + __IO uint32_t MESR; /*!< SBS Memory Erase Status register, Address offset: 0x108 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t CCCSR; /*!< SBS IO Compensation Cell Control and Status register, Address offset: 0x110 */ + __IO uint32_t CCVALR; /*!< SBS IO Compensation Cell Value register, Address offset: 0x114 */ + __IO uint32_t CCSWVALR; /*!< SBS IO Compensation Cell Software Value register, Address offset: 0x118 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x11C */ + __IO uint32_t BKLOCKR; /*!< SBS Break Lockup register, Address offset: 0x120 */ + uint32_t RESERVED7[3]; /*!< Reserved, Address offset: 0x124-0x12C */ + __IO uint32_t EXTICR[4]; /*!< SBS External Interrupt Configuration registers, Address offset: 0x130-0x13C */ +} SBS_TypeDef; + +/** + * @brief Secure Digital Card/IO Embedded MultiMediaCard Interface + */ +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC Power control register, Address offset : 0x000 */ + __IO uint32_t CLKCR; /*!< SDMMC Clock control register, Address offset : 0x004 */ + __IO uint32_t ARG; /*!< SDMMC Argument register, Address offset : 0x008 */ + __IO uint32_t CMD; /*!< SDMMC Command register, Address offset : 0x00C */ + __IO uint32_t RESPCMD; /*!< SDMMC Command response register, Address offset : 0x010 */ + __IO uint32_t RESP1; /*!< SDMMC Response 1 register, Address offset : 0x014 */ + __IO uint32_t RESP2; /*!< SDMMC Response 2 register, Address offset : 0x018 */ + __IO uint32_t RESP3; /*!< SDMMC Response 3 register, Address offset : 0x01C */ + __IO uint32_t RESP4; /*!< SDMMC Response 4 register, Address offset : 0x020 */ + __IO uint32_t DTIMER; /*!< SDMMC Data timer register, Address offset : 0x024 */ + __IO uint32_t DLEN; /*!< SDMMC Data length register, Address offset : 0x028 */ + __IO uint32_t DCTRL; /*!< SDMMC Data control register, Address offset : 0x02C */ + __IO uint32_t DCOUNT; /*!< SDMMC Data counter register, Address offset : 0x030 */ + __IO uint32_t STA; /*!< SDMMC Status register, Address offset : 0x034 */ + __IO uint32_t ICR; /*!< SDMMC Interrupt clear register, Address offset : 0x038 */ + __IO uint32_t MASK; /*!< SDMMC Mask register, Address offset : 0x03C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset : 0x040 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset : 0x044 - 0x04C */ + __IO uint32_t IDMACTRL; /*!< SDMMC IDMA control register, Address offset : 0x050 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC IDMA buffer size register, Address offset : 0x054 */ + __IO uint32_t IDMABASER; /*!< SDMMC IDMA buffer base address register, Address offset : 0x058 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset : 0x05C - 0x060 */ + __IO uint32_t IDMALAR; /*!< SDMMC IDMA linked list address register, Address offset : 0x064 */ + __IO uint32_t IDMABAR; /*!< SDMMC IDMA linked list memory base register, Address offset : 0x068 */ + uint32_t RESERVED2[5]; /*!< Reserved, Address offset : 0x06C - 0x07C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset : 0x080 */ +} SDMMC_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + +/** + * @brief SPI + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t TXDR; /*!< SPI Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, Address offset: 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, Address offset: 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ +} SPI_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< TAMP configuration register 3, Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< TAMP filter control register, Address offset: 0x0C */ + __IO uint32_t ATCR1; /*!< TAMP filter control register 1 Address offset: 0x10 */ + __IO uint32_t ATSEEDR; /*!< TAMP active tamper seed register, Address offset: 0x14 */ + __IO uint32_t ATOR; /*!< TAMP active tamper output register, Address offset: 0x18 */ + __IO uint32_t ATCR2; /*!< TAMP filter control register 2, Address offset: 0x1C */ + __IO uint32_t CFGR; /*!< TAMP configuration control register, Address offset: 0x20 */ + __IO uint32_t PRIVCFGR; /*!< TAMP privilege mode control register, Address offset: 0x24 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t IER; /*!< TAMP interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP masked interrupt status register, Address offset: 0x34 */ + __IO uint32_t RESERVED3; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP status clear register, Address offset: 0x3C */ + __IO uint32_t COUNT1R; /*!< TAMP monotonic counter 1 register, Address offset: 0x40 */ + uint32_t RESERVED4[4]; /*!< Reserved, Address offset: 0x43 -- 0x50 */ + __IO uint32_t RPCFGR; /*!< TAMP resources protection configuration register, Address offset: 0x54 */ + uint32_t RESERVED5[42]; /*!< Reserved, Address offset: 0x58 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ + __IO uint32_t BKP5R; /*!< TAMP backup register 5, Address offset: 0x114 */ + __IO uint32_t BKP6R; /*!< TAMP backup register 6, Address offset: 0x118 */ + __IO uint32_t BKP7R; /*!< TAMP backup register 7, Address offset: 0x11C */ + __IO uint32_t BKP8R; /*!< TAMP backup register 8, Address offset: 0x120 */ + __IO uint32_t BKP9R; /*!< TAMP backup register 9, Address offset: 0x124 */ + __IO uint32_t BKP10R; /*!< TAMP backup register 10, Address offset: 0x128 */ + __IO uint32_t BKP11R; /*!< TAMP backup register 11, Address offset: 0x12C */ + __IO uint32_t BKP12R; /*!< TAMP backup register 12, Address offset: 0x130 */ + __IO uint32_t BKP13R; /*!< TAMP backup register 13, Address offset: 0x134 */ + __IO uint32_t BKP14R; /*!< TAMP backup register 14, Address offset: 0x138 */ + __IO uint32_t BKP15R; /*!< TAMP backup register 15, Address offset: 0x13C */ + __IO uint32_t BKP16R; /*!< TAMP backup register 16, Address offset: 0x140 */ + __IO uint32_t BKP17R; /*!< TAMP backup register 17, Address offset: 0x144 */ + __IO uint32_t BKP18R; /*!< TAMP backup register 18, Address offset: 0x148 */ + __IO uint32_t BKP19R; /*!< TAMP backup register 19, Address offset: 0x14C */ + __IO uint32_t BKP20R; /*!< TAMP backup register 20, Address offset: 0x150 */ + __IO uint32_t BKP21R; /*!< TAMP backup register 21, Address offset: 0x154 */ + __IO uint32_t BKP22R; /*!< TAMP backup register 22, Address offset: 0x158 */ + __IO uint32_t BKP23R; /*!< TAMP backup register 23, Address offset: 0x15C */ + __IO uint32_t BKP24R; /*!< TAMP backup register 24, Address offset: 0x160 */ + __IO uint32_t BKP25R; /*!< TAMP backup register 25, Address offset: 0x164 */ + __IO uint32_t BKP26R; /*!< TAMP backup register 26, Address offset: 0x168 */ + __IO uint32_t BKP27R; /*!< TAMP backup register 27, Address offset: 0x16C */ + __IO uint32_t BKP28R; /*!< TAMP backup register 28, Address offset: 0x170 */ + __IO uint32_t BKP29R; /*!< TAMP backup register 29, Address offset: 0x174 */ + __IO uint32_t BKP30R; /*!< TAMP backup register 30, Address offset: 0x178 */ + __IO uint32_t BKP31R; /*!< TAMP backup register 31, Address offset: 0x17C */ +} TAMP_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register 5, Address offset: 0x48 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register 6, Address offset: 0x4C */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x50 */ + __IO uint32_t DTR2; /*!< TIM deadtime register 2, Address offset: 0x54 */ + __IO uint32_t ECR; /*!< TIM encoder control register, Address offset: 0x58 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + uint32_t RESERVED0[221]; /*!< Reserved, Address offset: 0x68 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x3DC */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x3E0 */ +} TIM_TypeDef; + + +/** + * @brief UCPD + */ +typedef struct +{ + __IO uint32_t CFG1; /*!< UCPD configuration register 1, Address offset: 0x00 */ + __IO uint32_t CFG2; /*!< UCPD configuration register 2, Address offset: 0x04 */ + __IO uint32_t CFG3; /*!< UCPD configuration register 3, Address offset: 0x08 */ + __IO uint32_t CR; /*!< UCPD control register, Address offset: 0x0C */ + __IO uint32_t IMR; /*!< UCPD interrupt mask register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< UCPD status register, Address offset: 0x14 */ + __IO uint32_t ICR; /*!< UCPD interrupt flag clear register Address offset: 0x18 */ + __IO uint32_t TX_ORDSET; /*!< UCPD Tx ordered set type register, Address offset: 0x1C */ + __IO uint32_t TX_PAYSZ; /*!< UCPD Tx payload size register, Address offset: 0x20 */ + __IO uint32_t TXDR; /*!< UCPD Tx data register, Address offset: 0x24 */ + __IO uint32_t RX_ORDSET; /*!< UCPD Rx ordered set type register, Address offset: 0x28 */ + __IO uint32_t RX_PAYSZ; /*!< UCPD Rx payload size register, Address offset: 0x2C */ + __IO uint32_t RXDR; /*!< UCPD Rx data register, Address offset: 0x30 */ + __IO uint32_t RX_ORDEXT1; /*!< UCPD Rx ordered set extension 1 register, Address offset: 0x34 */ + __IO uint32_t RX_ORDEXT2; /*!< UCPD Rx ordered set extension 2 register, Address offset: 0x38 */ +} UCPD_TypeDef; + +/** + * @brief USB_OTG_Core_register + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register, Address offset: 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register, Address offset: 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register, Address offset: 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register, Address offset: 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register, Address offset: 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register, Address offset: 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register, Address offset: 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register, Address offset: 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register, Address offset: 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register, Address offset: 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register, Address offset: 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg, Address offset: 02Ch */ + __IO uint32_t Reserved30[2]; /*!< Reserved, Address offset: 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register, Address offset: 038h */ + __IO uint32_t CID; /*!< User ID Register, Address offset: 03Ch */ + __IO uint32_t GSNPSID; /*!< USB_OTG core ID, Address offset: 040h */ + __IO uint32_t GHWCFG1; /*!< User HW config1, Address offset: 044h */ + __IO uint32_t GHWCFG2; /*!< User HW config2, Address offset: 048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3, Address offset: 04Ch */ + __IO uint32_t Reserved6; /*!< Reserved, Address offset: 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register, Address offset: 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register, Address offset: 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register, Address offset: 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register, Address offset: 60Ch */ + __IO uint32_t Reserved43[39]; /*!< Reserved, Address offset: 058h */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg, Address offset: 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 104h */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register, Address offset: 800h */ + __IO uint32_t DCTL; /*!< dev Control Register, Address offset: 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO), Address offset: 808h */ + uint32_t Reserved0C; /*!< Reserved, Address offset: 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask, Address offset: 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask, Address offset: 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg, Address offset: 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask, Address offset: 81Ch */ + uint32_t Reserved20; /*!< Reserved, Address offset: 820h */ + uint32_t Reserved9; /*!< Reserved, Address offset: 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register, Address offset: 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register, Address offset: 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold, Address offset: 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk, Address offset: 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt, Address offset: 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk, Address offset: 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask, Address offset: 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask, Address offset: 844h */ + uint32_t Reserved44[15]; /*!< Reserved, Address offset: 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk, Address offset: 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Register, Address offset: 900h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Register, Address offset: 900h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size Register, Address offset: 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Register, Address offset: 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Register, Address offset: 900h + (ep_num * 20h) + 18h */ + __IO uint32_t Reserved18; /*!< Reserved, Address offset: 900h + (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Register, Address offset: B00h + (ep_num * 20h) + 00h */ + __IO uint32_t Reserved04; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Register, Address offset: B00h + (ep_num * 20h) + 08h */ + __IO uint32_t Reserved0C; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size Register, Address offset: B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address Register, Address offset: B00h + (ep_num * 20h) + 14h */ + __IO uint32_t Reserved18[2]; /*!< Reserved, Address offset: B00h + (ep_num * 20h) + 18h */ +} USB_OTG_OUTEndpointTypeDef; + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register, Address offset: 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register, Address offset: 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining, Address offset: 408h */ + uint32_t Reserved40C; /*!< Reserved, Address offset: 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status, Address offset: 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register, Address offset: 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask, Address offset: 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register, Address offset: 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register, Address offset: 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register, Address offset: 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register, Address offset: 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register, Address offset: 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register, Address offset: 514h */ + uint32_t Reserved[2]; /*!< Reserved, Address offset: 518h */ +} USB_OTG_HostChannelTypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Window Watchdog + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/*@}*/ /* end of group STM32H7RSxx_peripherals */ + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + +/** @addtogroup STM32H7RSxx_Peripheral_peripheralAddr + * @{ + */ +#define ITCM_BASE 0x00000000UL /*!< ITCM base address */ +#define FLASH_BASE 0x08000000UL /*!< User Flash address */ +#define OTP_AREA_BASE 0x08FFF000UL /*!< OTP Area base address */ +#define ENGI_BYTES_BASE 0x52002800UL /*!< Engi Bytes */ +#define SYSTEM_FLASH_BASE 0x1FF00000UL /*!< System Flash base address */ +#define DTCM_BASE 0x20000000UL /*!< DTCM base address */ +#define SRAM1_AXI_BASE 0x24000000UL /*!< SRAM1 base address - accessible over AXI */ +#define SRAM2_AXI_BASE 0x24020000UL /*!< SRAM2 base address - accessible over AXI */ +#define SRAM3_AXI_BASE 0x24040000UL /*!< SRAM3 base address - accessible over AXI */ +#define SRAM4_AXI_BASE 0x24060000UL /*!< SRAM4 base address - accessible over AXI */ + +#define GFXMMU_VIRTUAL_BUFFER0_BASE 0x25000000UL /*!< GFXMMU virtual buffer 0 base address */ +#define GFXMMU_VIRTUAL_BUFFER1_BASE 0x25400000UL /*!< GFXMMU virtual buffer 1 base address */ +#define GFXMMU_VIRTUAL_BUFFER2_BASE 0x25800000UL /*!< GFXMMU virtual buffer 2 base address */ +#define GFXMMU_VIRTUAL_BUFFER3_BASE 0x25C00000UL /*!< GFXMMU virtual buffer 3 base address */ + +#define SRAM1_AHB_BASE 0x30000000UL /*!< SRAM1 base address */ +#define SRAM2_AHB_BASE 0x30004000UL /*!< SRAM2 base address */ +#define BKPSRAM_BASE 0x38800000UL /*!< Backup SRAM */ + +#define PERIPH_BASE 0x40000000UL /*!< AHB and APB Peripherals base address */ +#define XSPI2_BASE 0x70000000UL /*!< XSPI2 base address */ +#define XSPI1_BASE 0x90000000UL /*!< XSPI1 base address */ + +/*!< Internal memory size */ +#define ITCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define DTCM_SIZE 0x00010000UL /*!< 64 KB default, can be increased up to 192 KB */ +#define FLASH_SIZE 0x00010000UL /*!< 64 KB */ +#define SRAM1_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase ITCM */ +#define SRAM2_AXI_SIZE 0x00020000UL /*!< 128 KB */ +#define SRAM3_AXI_SIZE 0x00020000UL /*!< 128 KB default, can be decreased down to 0 KB to increase DTCM */ +#define SRAM4_AXI_SIZE 0x00012000UL /*!< 72 KB default, can be decreased to 0 KB when RAM ECC is disable */ +#define SRAM_AHB_SIZE 0x00004000UL /*!< Both AHB SRAMs are 16 KB */ +#define BKPSRAM_SIZE 0x00001000UL /*!< 4 KB */ + +/*!< OTP Area size */ +#define OTP_SIZE 0x400U /* 1 KB */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x02000000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x08020000UL) +#define APB5PERIPH_BASE (PERIPH_BASE + 0x10000000UL) +#define AHB5PERIPH_BASE (PERIPH_BASE + 0x12000000UL) +#define APB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18020000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I3C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00UL) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x8400UL) +#define MDIOS_BASE (APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (APB1PERIPH_BASE + 0xA000UL) +#define FDCAN_CONFIG_BASE (APB1PERIPH_BASE + 0xA100UL) /*!< FDCAN configuration registers base address */ +#define FDCAN2_BASE (APB1PERIPH_BASE + 0xA400UL) +#define SRAMCAN_BASE (APB1PERIPH_BASE + 0xAC00UL) +#define UCPD1_BASE (APB1PERIPH_BASE + 0xEC00UL) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800UL) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00UL) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x0004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x0024UL) + +/*!< AHB1 peripherals */ +#define GPDMA1_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define GPDMA1_Channel0_BASE (GPDMA1_BASE + 0x0050UL) +#define GPDMA1_Channel1_BASE (GPDMA1_BASE + 0x00D0UL) +#define GPDMA1_Channel2_BASE (GPDMA1_BASE + 0x0150UL) +#define GPDMA1_Channel3_BASE (GPDMA1_BASE + 0x01D0UL) +#define GPDMA1_Channel4_BASE (GPDMA1_BASE + 0x0250UL) +#define GPDMA1_Channel5_BASE (GPDMA1_BASE + 0x02D0UL) +#define GPDMA1_Channel6_BASE (GPDMA1_BASE + 0x0350UL) +#define GPDMA1_Channel7_BASE (GPDMA1_BASE + 0x03D0UL) +#define GPDMA1_Channel8_BASE (GPDMA1_BASE + 0x0450UL) +#define GPDMA1_Channel9_BASE (GPDMA1_BASE + 0x04D0UL) +#define GPDMA1_Channel10_BASE (GPDMA1_BASE + 0x0550UL) +#define GPDMA1_Channel11_BASE (GPDMA1_BASE + 0x05D0UL) +#define GPDMA1_Channel12_BASE (GPDMA1_BASE + 0x0650UL) +#define GPDMA1_Channel13_BASE (GPDMA1_BASE + 0x06D0UL) +#define GPDMA1_Channel14_BASE (GPDMA1_BASE + 0x0750UL) +#define GPDMA1_Channel15_BASE (GPDMA1_BASE + 0x07D0UL) +#define ADC1_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (AHB1PERIPH_BASE + 0x2300UL) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL) +#define ETH_MAC_BASE (ETH_BASE) +#define ADF1_BASE (AHB1PERIPH_BASE + 0xF000UL) +#define ADF1_Filter0_BASE (ADF1_BASE + 0x0080UL) +#define USB_OTG_HS_PERIPH_BASE (AHB1PERIPH_BASE + 0x20000UL) +#define USB_OTG_FS_PERIPH_BASE (AHB1PERIPH_BASE + 0x60000UL) + +/*!< AHB2 peripherals */ +#define PSSI_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define SDMMC2_BASE (AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (AHB2PERIPH_BASE + 0x2800UL) +#define CORDIC_BASE (AHB2PERIPH_BASE + 0x4400UL) + +/*!< AHB3 peripherals */ +#define RNG_BASE AHB3PERIPH_BASE +#define HASH_BASE (AHB3PERIPH_BASE + 0x0400UL) +#define HASH_DIGEST_BASE (AHB3PERIPH_BASE + 0x0710UL) +#define CRYP_BASE (AHB3PERIPH_BASE + 0x0800UL) +#define SAES_BASE (AHB3PERIPH_BASE + 0x1000UL) +#define PKA_BASE (AHB3PERIPH_BASE + 0x2000UL) + +/*!< APB5 peripherals */ +#define LTDC_BASE (APB5PERIPH_BASE + 0x1000UL) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x0084UL) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x0104UL) +#define DCMIPP_BASE (APB5PERIPH_BASE + 0x2000UL) +#define GFXTIM_BASE (APB5PERIPH_BASE + 0x4000UL) + +/*!< AHB5 peripherals */ +#define HPDMA1_BASE AHB5PERIPH_BASE +#define HPDMA1_Channel0_BASE (HPDMA1_BASE + 0x0050UL) +#define HPDMA1_Channel1_BASE (HPDMA1_BASE + 0x00D0UL) +#define HPDMA1_Channel2_BASE (HPDMA1_BASE + 0x0150UL) +#define HPDMA1_Channel3_BASE (HPDMA1_BASE + 0x01D0UL) +#define HPDMA1_Channel4_BASE (HPDMA1_BASE + 0x0250UL) +#define HPDMA1_Channel5_BASE (HPDMA1_BASE + 0x02D0UL) +#define HPDMA1_Channel6_BASE (HPDMA1_BASE + 0x0350UL) +#define HPDMA1_Channel7_BASE (HPDMA1_BASE + 0x03D0UL) +#define HPDMA1_Channel8_BASE (HPDMA1_BASE + 0x0450UL) +#define HPDMA1_Channel9_BASE (HPDMA1_BASE + 0x04D0UL) +#define HPDMA1_Channel10_BASE (HPDMA1_BASE + 0x0550UL) +#define HPDMA1_Channel11_BASE (HPDMA1_BASE + 0x05D0UL) +#define HPDMA1_Channel12_BASE (HPDMA1_BASE + 0x0650UL) +#define HPDMA1_Channel13_BASE (HPDMA1_BASE + 0x06D0UL) +#define HPDMA1_Channel14_BASE (HPDMA1_BASE + 0x0750UL) +#define HPDMA1_Channel15_BASE (HPDMA1_BASE + 0x07D0UL) +#define DMA2D_BASE (AHB5PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB5PERIPH_BASE + 0x2000UL) +#define JPEG_BASE (AHB5PERIPH_BASE + 0x3000UL) +#define FMC_R_BASE (AHB5PERIPH_BASE + 0x4000UL) +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) +#define XSPI1_R_BASE (AHB5PERIPH_BASE + 0x5000UL) +#define DLYB_XSPI1_BASE (AHB5PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (AHB5PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (AHB5PERIPH_BASE + 0x8000UL) +#define RAMECC1_BASE (AHB5PERIPH_BASE + 0x9000UL) +#define RAMECC1_Monitor0_BASE (RAMECC1_BASE + 0x20UL) +#define RAMECC1_Monitor1_BASE (RAMECC1_BASE + 0x40UL) +#define RAMECC1_Monitor2_BASE (RAMECC1_BASE + 0x60UL) +#define RAMECC1_Monitor3_BASE (RAMECC1_BASE + 0x80UL) +#define RAMECC1_Monitor4_BASE (RAMECC1_BASE + 0xA0UL) +#define XSPI2_R_BASE (AHB5PERIPH_BASE + 0xA000UL) +#define DLYB_XSPI2_BASE (AHB5PERIPH_BASE + 0xB000UL) +#define XSPIM_BASE (AHB5PERIPH_BASE + 0xB400UL) +#define MCE1_BASE (AHB5PERIPH_BASE + 0xB800UL) +#define MCE1_REGION1_BASE (MCE1_BASE + 0x040UL) +#define MCE1_REGION2_BASE (MCE1_BASE + 0x050UL) +#define MCE1_REGION3_BASE (MCE1_BASE + 0x060UL) +#define MCE1_REGION4_BASE (MCE1_BASE + 0x070UL) +#define MCE1_CONTEXT1_BASE (MCE1_BASE + 0x240UL) +#define MCE1_CONTEXT2_BASE (MCE1_BASE + 0x270UL) +#define MCE2_BASE (AHB5PERIPH_BASE + 0xBC00UL) +#define MCE2_REGION1_BASE (MCE2_BASE + 0x040UL) +#define MCE2_REGION2_BASE (MCE2_BASE + 0x050UL) +#define MCE2_REGION3_BASE (MCE2_BASE + 0x060UL) +#define MCE2_REGION4_BASE (MCE2_BASE + 0x070UL) +#define MCE3_BASE (AHB5PERIPH_BASE + 0xC000UL) +#define MCE3_REGION1_BASE (MCE3_BASE + 0x040UL) +#define MCE3_REGION2_BASE (MCE3_BASE + 0x050UL) +#define MCE3_REGION3_BASE (MCE3_BASE + 0x060UL) +#define MCE3_REGION4_BASE (MCE3_BASE + 0x070UL) +#define GFXMMU_BASE (AHB5PERIPH_BASE + 0x010000UL) +#define GPU2D_BASE (AHB5PERIPH_BASE + 0x014000UL) +#define ICACHE_BASE (AHB5PERIPH_BASE + 0x015000UL) + +/*!< APB4 peripherals */ +#define EXTI_BASE APB4PERIPH_BASE +#define SBS_BASE (APB4PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (APB4PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (APB4PERIPH_BASE + 0x1400UL) +#define LPTIM2_BASE (APB4PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (APB4PERIPH_BASE + 0x2800UL) +#define LPTIM4_BASE (APB4PERIPH_BASE + 0x2C00UL) +#define LPTIM5_BASE (APB4PERIPH_BASE + 0x3000UL) +#define VREFBUF_BASE (APB4PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (APB4PERIPH_BASE + 0x4000UL) +#define TAMP_BASE (APB4PERIPH_BASE + 0x4400UL) +#define IWDG_BASE (APB4PERIPH_BASE + 0x4800UL) +#define DTS_BASE (APB4PERIPH_BASE + 0x6800UL) + +/*!< AHB4 peripherals */ +#define GPIOA_BASE AHB4PERIPH_BASE +#define GPIOB_BASE (AHB4PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB4PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB4PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB4PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (AHB4PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (AHB4PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (AHB4PERIPH_BASE + 0x1C00UL) +#define GPIOM_BASE (AHB4PERIPH_BASE + 0x3000UL) +#define GPION_BASE (AHB4PERIPH_BASE + 0x3400UL) +#define GPIOO_BASE (AHB4PERIPH_BASE + 0x3800UL) +#define GPIOP_BASE (AHB4PERIPH_BASE + 0x3C00UL) +#define RCC_BASE (AHB4PERIPH_BASE + 0x4400UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x4800UL) +#define CRC_BASE (AHB4PERIPH_BASE + 0x4C00UL) +#define RAMECC2_BASE (AHB4PERIPH_BASE + 0x7000UL) +#define RAMECC2_Monitor1_BASE (RAMECC2_BASE + 0x40UL) + +/*!< Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +/*!< AXIM registers base address */ +#define AXIM_BASE (0xBFF00000UL) +#define AXIM_ASIB1_BASE (AXIM_BASE + 0x42000UL) +#define AXIM_ASIB2_BASE (AXIM_BASE + 0x43000UL) +#define AXIM_ASIB3_BASE (AXIM_BASE + 0x44000UL) +#define AXIM_ASIB4_BASE (AXIM_BASE + 0x45000UL) +#define AXIM_ASIB5_BASE (AXIM_BASE + 0x46000UL) +#define AXIM_ASIB6_BASE (AXIM_BASE + 0x47000UL) +#define AXIM_ASIB7_BASE (AXIM_BASE + 0x48000UL) +#define AXIM_ASIB8_BASE (AXIM_BASE + 0x49000UL) +#define AXIM_ASIB9_BASE (AXIM_BASE + 0x4A000UL) +#define AXIM_ASIB10_BASE (AXIM_BASE + 0x4B000UL) +#define AXIM_ASIB11_BASE (AXIM_BASE + 0x4C000UL) +#define AXIM_AMIB1_BASE (AXIM_BASE + 0x02000UL) +#define AXIM_AMIB2_BASE (AXIM_BASE + 0x03000UL) +#define AXIM_AMIB3_BASE (AXIM_BASE + 0x04000UL) +#define AXIM_AMIB4_BASE (AXIM_BASE + 0x05000UL) +#define AXIM_AMIB5_BASE (AXIM_BASE + 0x06000UL) +#define AXIM_AMIB6_BASE (AXIM_BASE + 0x07000UL) +#define AXIM_AMIB7_BASE (AXIM_BASE + 0x08000UL) +#define AXIM_AMIB8_BASE (AXIM_BASE + 0x09000UL) +#define AXIM_AMIB9_BASE (AXIM_BASE + 0x0A000UL) +#define AXIM_AMIB10_BASE (AXIM_BASE + 0x0B000UL) + +/*!< Unique device ID register base address */ +#define UID_BASE (0x08FFF800UL) + +/*!< Flash size data register base address */ +#define FLASHSIZE_BASE (0x08FFF80CUL) + +/*!< Package data register base address */ +#define PACKAGE_BASE (0x08FFF80CUL) + +/* USB OTG registers base addresses */ +#define USB_OTG_GLOBAL_BASE (0x0000UL) +#define USB_OTG_DEVICE_BASE (0x0800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x0900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0x0B00UL) +#define USB_OTG_EP_REG_SIZE (0x0020UL) +#define USB_OTG_HOST_BASE (0x0400UL) +#define USB_OTG_HOST_PORT_BASE (0x0440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x0500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x0020UL) +#define USB_OTG_PCGCCTL_BASE (0x0E00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< Root Secure Service Library */ +/************ RSSLIB system Flash region definition constants *************/ +#define RSSLIB_SYS_FLASH_PFUNC_START (0x1FF1FD4CUL) +#define RSSLIB_SYS_FLASH_PFUNC_END (0x1FF1FD78UL) + +/************ RSSLIB function return constants ********************************/ +#define RSSLIB_ERROR (0xF5F5F5F5UL) +#define RSSLIB_SUCCESS (0xEAEAEAEAUL) + +/*!< RSSLIB pointer function structure address definition */ +#define RSSLIB_PFUNC_BASE (0x1FF1FD4CUL) +#define RSSLIB_PFUNC ((RSSLIB_pFunc_TypeDef *)RSSLIB_PFUNC_BASE) + +/** + * @brief Prototype of RSSLIB Jump to HDP level2 Function + * @detail This function increments HDP level up to HDP level 2 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl2_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Prototype of RSSLIB Jump to HDP level3 Function + * @detail This function increments HDP level up to HDP level 3 + * Then it enables the MPU region corresponding the MPU index + * provided as input parameter. The Vector Table shall be located + * within this MPU region. + * Then it jumps to the reset handler present within the + * Vector table. The function does not return on successful execution. + * @param pointer on the vector table containing the reset handler the function + * jumps to. + * @param MPU region index containing the vector table + * jumps to. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_JumpHDPlvl3_TypeDef)(uint32_t VectorTableAddr, uint32_t MPUIndex); + +/** + * @brief Input parameter definition of RSSLIB_DataProvisioning + */ +typedef struct +{ + uint32_t *pSource; /*!< Address of the Data to be provisioned, shall be in SRAM3 */ + uint32_t Destination; /*!< OBKeys destination information where to provision Data */ + uint32_t Size; /*!< Size in bytes of the Data to be provisioned*/ + uint32_t DoEncryption; /*!< Notifies RSSLIB_DataProvisioning to encrypt or not Data*/ + uint32_t Crc; /*!< CRC over full Data buffer and previous field in the structure*/ +} RSSLIB_DataProvisioningConf_t; + +/** + * @brief Prototype of RSSLIB Data Provisioning Function + * @detail This function write Data within OBKeys sections. + * @param pointer on the structure defining Data to be provisioned and where to + * provision them within OBKeys sections. + * @retval RSSLIB_RSS_ERROR on error on input parameter, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_DataProvisioning_TypeDef)(RSSLIB_DataProvisioningConf_t *pConfig); + +/** + * @brief Prototype of RSSLIB Set Secure OB Function + * @detail This function configure a secure OB. + * @param OB address among following values: + * &(FLASH->WRPSRP), &(FLASH->HDPSRP) or &(FLASH->ROTSRP) + * @param OB mask (example 0x000000FF for updating WRP OB). + * @param OB value + * @param OB Pos: bit position of OB value. + * ObValue << ObPos must be aligned on ObMask. + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetSecOB_TypeDef)(uint32_t ObAddr, uint32_t ObMask, uint32_t ObValue, uint32_t ObPos); + +/** + * @brief Prototype of RSSLIB Get RSS Status Function + * @detail This function return RSS Status. + * Calling GetRssStatus is only relevant after calling + * SetSecOB or DataProvisioning. + * @param none. + * @retval RSSLIB_SUCCESS on success, otherwise return an error 0xF5F5xxxx. + */ +typedef uint32_t (*RSSLIB_GetRssStatus_TypeDef)(void); + +/** + * @brief Prototype of RSSLIB Set Product State Function + * @detail This function change Product State. + * @param Requested Product State among following values: + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + * @retval RSSLIB_RSS_ERROR on error, otherwise does not return. + */ +typedef uint32_t (*RSSLIB_SetProductState_TypeDef)(uint32_t ProductState); + +/** + * @brief Prototype of RSSLIB Get Product State Function + * @detail This function return current Product State. + * @param none. + * @retval RSSLIB_RSS_ERROR on error, + * otherwise return product state among following values: + * 0x39 : Open + * 0x17 : Provisioning + * 0x72 : Closed + * 0x5C : Locked + */ +typedef uint32_t (*RSSLIB_GetProductState_TypeDef)(void); + + +/** + * @brief RSSLib callable function pointer structure + */ +typedef struct +{ + __IM RSSLIB_SetSecOB_TypeDef SetSecOB; + uint32_t RESERVED1[4]; + __IM RSSLIB_GetRssStatus_TypeDef GetRssStatus; + __IM RSSLIB_SetProductState_TypeDef SetProductState; + __IM RSSLIB_DataProvisioning_TypeDef DataProvisioning; + __IM RSSLIB_JumpHDPlvl2_TypeDef JumpHDPLvl2; + __IM RSSLIB_JumpHDPlvl3_TypeDef JumpHDPLvl3; + __IM RSSLIB_GetProductState_TypeDef GetProductState; +} RSSLIB_pFunc_TypeDef; + + +/** @} */ /* End of group STM32H7RSxx_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup STM32H7RSxx_Peripheral_declaration + * @{ + */ + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) +#define ADF1 ((MDF_TypeDef *) ADF1_BASE) +#define ADF1_Filter0 ((MDF_Filter_TypeDef *) ADF1_Filter0_BASE) +#define AXIM_AMIB_1 ((AXIM_AMIB_TypeDef *) AXIM_AMIB1_BASE ) +#define AXIM_AMIB_2 ((AXIM_AMIB_TypeDef *) AXIM_AMIB2_BASE ) +#define AXIM_AMIB_3 ((AXIM_AMIB_TypeDef *) AXIM_AMIB3_BASE ) +#define AXIM_AMIB_4 ((AXIM_AMIB_TypeDef *) AXIM_AMIB4_BASE ) +#define AXIM_AMIB_5 ((AXIM_AMIB_TypeDef *) AXIM_AMIB5_BASE ) +#define AXIM_AMIB_6 ((AXIM_AMIB_TypeDef *) AXIM_AMIB6_BASE ) +#define AXIM_AMIB_7 ((AXIM_AMIB_TypeDef *) AXIM_AMIB7_BASE ) +#define AXIM_AMIB_8 ((AXIM_AMIB_TypeDef *) AXIM_AMIB8_BASE ) +#define AXIM_AMIB_9 ((AXIM_AMIB_TypeDef *) AXIM_AMIB9_BASE ) +#define AXIM_AMIB_10 ((AXIM_AMIB_TypeDef *) AXIM_AMIB10_BASE) +#define AXIM_ASIB_1 ((AXIM_ASIB_TypeDef *) AXIM_ASIB1_BASE ) +#define AXIM_ASIB_2 ((AXIM_ASIB_TypeDef *) AXIM_ASIB2_BASE ) +#define AXIM_ASIB_3 ((AXIM_ASIB_TypeDef *) AXIM_ASIB3_BASE ) +#define AXIM_ASIB_4 ((AXIM_ASIB_TypeDef *) AXIM_ASIB4_BASE ) +#define AXIM_ASIB_5 ((AXIM_ASIB_TypeDef *) AXIM_ASIB5_BASE ) +#define AXIM_ASIB_6 ((AXIM_ASIB_TypeDef *) AXIM_ASIB6_BASE ) +#define AXIM_ASIB_7 ((AXIM_ASIB_TypeDef *) AXIM_ASIB7_BASE ) +#define AXIM_ASIB_8 ((AXIM_ASIB_TypeDef *) AXIM_ASIB8_BASE ) +#define AXIM_ASIB_9 ((AXIM_ASIB_TypeDef *) AXIM_ASIB9_BASE ) +#define AXIM_ASIB_10 ((AXIM_ASIB_TypeDef *) AXIM_ASIB10_BASE) +#define AXIM_ASIB_11 ((AXIM_ASIB_TypeDef *) AXIM_ASIB11_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define CORDIC ((CORDIC_TypeDef *) CORDIC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define CRYP ((CRYP_TypeDef *) CRYP_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define DCMIPP ((DCMIPP_TypeDef *) DCMIPP_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) +#define DLYB_XSPI1 ((DLYB_TypeDef *) DLYB_XSPI1_BASE) +#define DLYB_XSPI2 ((DLYB_TypeDef *) DLYB_XSPI2_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DTS ((DTS_TypeDef *) DTS_BASE) +#define ETH ((ETH_TypeDef *)ETH_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CONFIG ((FDCAN_Config_TypeDef *) FDCAN_CONFIG_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define GFXTIM ((GFXTIM_TypeDef *) GFXTIM_BASE) +#define GFXMMU ((GFXMMU_TypeDef *) GFXMMU_BASE) +#define GPU2D GPU2D_BASE +#define GPDMA1 ((DMA_TypeDef *) GPDMA1_BASE) +#define GPDMA1_Channel0 ((DMA_Channel_TypeDef *) GPDMA1_Channel0_BASE) +#define GPDMA1_Channel1 ((DMA_Channel_TypeDef *) GPDMA1_Channel1_BASE) +#define GPDMA1_Channel2 ((DMA_Channel_TypeDef *) GPDMA1_Channel2_BASE) +#define GPDMA1_Channel3 ((DMA_Channel_TypeDef *) GPDMA1_Channel3_BASE) +#define GPDMA1_Channel4 ((DMA_Channel_TypeDef *) GPDMA1_Channel4_BASE) +#define GPDMA1_Channel5 ((DMA_Channel_TypeDef *) GPDMA1_Channel5_BASE) +#define GPDMA1_Channel6 ((DMA_Channel_TypeDef *) GPDMA1_Channel6_BASE) +#define GPDMA1_Channel7 ((DMA_Channel_TypeDef *) GPDMA1_Channel7_BASE) +#define GPDMA1_Channel8 ((DMA_Channel_TypeDef *) GPDMA1_Channel8_BASE) +#define GPDMA1_Channel9 ((DMA_Channel_TypeDef *) GPDMA1_Channel9_BASE) +#define GPDMA1_Channel10 ((DMA_Channel_TypeDef *) GPDMA1_Channel10_BASE) +#define GPDMA1_Channel11 ((DMA_Channel_TypeDef *) GPDMA1_Channel11_BASE) +#define GPDMA1_Channel12 ((DMA_Channel_TypeDef *) GPDMA1_Channel12_BASE) +#define GPDMA1_Channel13 ((DMA_Channel_TypeDef *) GPDMA1_Channel13_BASE) +#define GPDMA1_Channel14 ((DMA_Channel_TypeDef *) GPDMA1_Channel14_BASE) +#define GPDMA1_Channel15 ((DMA_Channel_TypeDef *) GPDMA1_Channel15_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) +#define GPION ((GPIO_TypeDef *) GPION_BASE) +#define GPIOO ((GPIO_TypeDef *) GPIOO_BASE) +#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define HPDMA1 ((DMA_TypeDef *) HPDMA1_BASE) +#define HPDMA1_Channel0 ((DMA_Channel_TypeDef *) HPDMA1_Channel0_BASE) +#define HPDMA1_Channel1 ((DMA_Channel_TypeDef *) HPDMA1_Channel1_BASE) +#define HPDMA1_Channel2 ((DMA_Channel_TypeDef *) HPDMA1_Channel2_BASE) +#define HPDMA1_Channel3 ((DMA_Channel_TypeDef *) HPDMA1_Channel3_BASE) +#define HPDMA1_Channel4 ((DMA_Channel_TypeDef *) HPDMA1_Channel4_BASE) +#define HPDMA1_Channel5 ((DMA_Channel_TypeDef *) HPDMA1_Channel5_BASE) +#define HPDMA1_Channel6 ((DMA_Channel_TypeDef *) HPDMA1_Channel6_BASE) +#define HPDMA1_Channel7 ((DMA_Channel_TypeDef *) HPDMA1_Channel7_BASE) +#define HPDMA1_Channel8 ((DMA_Channel_TypeDef *) HPDMA1_Channel8_BASE) +#define HPDMA1_Channel9 ((DMA_Channel_TypeDef *) HPDMA1_Channel9_BASE) +#define HPDMA1_Channel10 ((DMA_Channel_TypeDef *) HPDMA1_Channel10_BASE) +#define HPDMA1_Channel11 ((DMA_Channel_TypeDef *) HPDMA1_Channel11_BASE) +#define HPDMA1_Channel12 ((DMA_Channel_TypeDef *) HPDMA1_Channel12_BASE) +#define HPDMA1_Channel13 ((DMA_Channel_TypeDef *) HPDMA1_Channel13_BASE) +#define HPDMA1_Channel14 ((DMA_Channel_TypeDef *) HPDMA1_Channel14_BASE) +#define HPDMA1_Channel15 ((DMA_Channel_TypeDef *) HPDMA1_Channel15_BASE) +#define ICACHE ((ICACHE_TypeDef *) ICACHE_BASE) +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I3C1 ((I3C_TypeDef *) I3C1_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define LPTIM4 ((LPTIM_TypeDef *) LPTIM4_BASE) +#define LPTIM5 ((LPTIM_TypeDef *) LPTIM5_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define MCE1 ((MCE_TypeDef *) MCE1_BASE) +#define MCE1_REGION1 ((MCE_Region_TypeDef *) MCE1_REGION1_BASE) +#define MCE1_REGION2 ((MCE_Region_TypeDef *) MCE1_REGION2_BASE) +#define MCE1_REGION3 ((MCE_Region_TypeDef *) MCE1_REGION3_BASE) +#define MCE1_REGION4 ((MCE_Region_TypeDef *) MCE1_REGION4_BASE) +#define MCE1_CONTEXT1 ((MCE_Context_TypeDef *) MCE1_CONTEXT1_BASE) +#define MCE1_CONTEXT2 ((MCE_Context_TypeDef *) MCE1_CONTEXT2_BASE) +#define MCE2 ((MCE_TypeDef *) MCE2_BASE) +#define MCE2_REGION1 ((MCE_Region_TypeDef *) MCE2_REGION1_BASE) +#define MCE2_REGION2 ((MCE_Region_TypeDef *) MCE2_REGION2_BASE) +#define MCE2_REGION3 ((MCE_Region_TypeDef *) MCE2_REGION3_BASE) +#define MCE2_REGION4 ((MCE_Region_TypeDef *) MCE2_REGION4_BASE) +#define MCE3 ((MCE_TypeDef *) MCE3_BASE) +#define MCE3_REGION1 ((MCE_Region_TypeDef *) MCE3_REGION1_BASE) +#define MCE3_REGION2 ((MCE_Region_TypeDef *) MCE3_REGION2_BASE) +#define MCE3_REGION3 ((MCE_Region_TypeDef *) MCE3_REGION3_BASE) +#define MCE3_REGION4 ((MCE_Region_TypeDef *) MCE3_REGION4_BASE) +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define PSSI ((PSSI_TypeDef *) PSSI_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RAMECC1 ((RAMECC_TypeDef *)RAMECC1_BASE) +#define RAMECC2 ((RAMECC_TypeDef *)RAMECC2_BASE) +#define RAMECC1_Monitor0 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor0_BASE) +#define RAMECC1_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor1_BASE) +#define RAMECC1_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor2_BASE) +#define RAMECC1_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor3_BASE) +#define RAMECC1_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor4_BASE) +#define RAMECC2_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor1_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define SAES ((SAES_TypeDef *) SAES_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *) SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *) SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *) SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *) SAI2_Block_B_BASE) +#define SBS ((SBS_TypeDef *) SBS_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UCPD1 ((UCPD_TypeDef *) UCPD1_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define XSPI1 ((XSPI_TypeDef *) XSPI1_R_BASE) +#define XSPI2 ((XSPI_TypeDef *) XSPI2_R_BASE) +#define XSPIM ((XSPIM_TypeDef *) XSPIM_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) + +/** @} */ /* End of group STM32H7RSxx_Peripheral_declaration */ + +/** @addtogroup STM32H7RSxx_Peripheral_Exported_constants + * @{ + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_Peripheral_Registers_Bits_Definition + * @{ + */ +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32G4 series) + */ +#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_ADFCFG_Pos (2U) +#define ADC_CFGR_ADFCFG_Msk (0x1UL << ADC_CFGR_ADFCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_ADFCFG ADC_CFGR_ADFCFG_Msk /*!< ADC ADF transfer configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR_ALIGN_Pos (15U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00008000 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +#define ADC_CFGR2_SWTRIG_Pos (25U) +#define ADC_CFGR2_SWTRIG_Msk (0x1UL << ADC_CFGR2_SWTRIG_Pos) /*!< 0x02000000 */ +#define ADC_CFGR2_SWTRIG ADC_CFGR2_SWTRIG_Msk /*!< ADC Software Trigger Bit for Sample time control trigger mode */ +#define ADC_CFGR2_BULB_Pos (26U) +#define ADC_CFGR2_BULB_Msk (0x1UL << ADC_CFGR2_BULB_Pos) /*!< 0x04000000 */ +#define ADC_CFGR2_BULB ADC_CFGR2_BULB_Msk /*!< ADC Bulb sampling mode */ +#define ADC_CFGR2_SMPTRIG_Pos (27U) +#define ADC_CFGR2_SMPTRIG_Msk (0x1UL << ADC_CFGR2_SMPTRIG_Pos) /*!< 0x08000000 */ +#define ADC_CFGR2_SMPTRIG ADC_CFGR2_SMPTRIG_Msk /*!< ADC Sample Time Control Trigger mode */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ + +#define ADC_TR1_AWDFILT_Pos (12U) +#define ADC_TR1_AWDFILT_Msk (0x7UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00007000 */ +#define ADC_TR1_AWDFILT ADC_TR1_AWDFILT_Msk /*!< ADC analog watchdog filtering parameter */ +#define ADC_TR1_AWDFILT_0 (0x1UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00001000 */ +#define ADC_TR1_AWDFILT_1 (0x2UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00002000 */ +#define ADC_TR1_AWDFILT_2 (0x4UL << ADC_TR1_AWDFILT_Pos) /*!< 0x00004000 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC analog watchdog 1 threshold high */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL<< ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ + +#define ADC_OFR1_OFFSETPOS_Pos (24U) +#define ADC_OFR1_OFFSETPOS_Msk (0x1UL << ADC_OFR1_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSETPOS ADC_OFR1_OFFSETPOS_Msk /*!< ADC offset number 1 positive */ +#define ADC_OFR1_SATEN_Pos (25U) +#define ADC_OFR1_SATEN_Msk (0x1UL << ADC_OFR1_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR1_SATEN ADC_OFR1_SATEN_Msk /*!< ADC offset number 1 saturation enable */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ + +#define ADC_OFR2_OFFSETPOS_Pos (24U) +#define ADC_OFR2_OFFSETPOS_Msk (0x1UL << ADC_OFR2_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSETPOS ADC_OFR2_OFFSETPOS_Msk /*!< ADC offset number 2 positive */ +#define ADC_OFR2_SATEN_Pos (25U) +#define ADC_OFR2_SATEN_Msk (0x1UL << ADC_OFR2_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR2_SATEN ADC_OFR2_SATEN_Msk /*!< ADC offset number 2 saturation enable */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ + +#define ADC_OFR3_OFFSETPOS_Pos (24U) +#define ADC_OFR3_OFFSETPOS_Msk (0x1UL << ADC_OFR3_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSETPOS ADC_OFR3_OFFSETPOS_Msk /*!< ADC offset number 3 positive */ +#define ADC_OFR3_SATEN_Pos (25U) +#define ADC_OFR3_SATEN_Msk (0x1UL << ADC_OFR3_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR3_SATEN ADC_OFR3_SATEN_Msk /*!< ADC offset number 3 saturation enable */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ + +#define ADC_OFR4_OFFSETPOS_Pos (24U) +#define ADC_OFR4_OFFSETPOS_Msk (0x1UL << ADC_OFR4_OFFSETPOS_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSETPOS ADC_OFR4_OFFSETPOS_Msk /*!< ADC offset number 4 positive */ +#define ADC_OFR4_SATEN_Pos (25U) +#define ADC_OFR4_SATEN_Msk (0x1UL << ADC_OFR4_SATEN_Pos) /*!< 0x02000000 */ +#define ADC_OFR4_SATEN ADC_OFR4_SATEN_Msk /*!< ADC offset number 4 saturation enable */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000030 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00300000 */ + +/******************** Bit definition for ADC_OR register ***************/ +#define ADC_OR_OP0_Pos (0U) +#define ADC_OR_OP0_Msk (0x1UL << ADC_OR_OP0_Pos) /*!< 0x00000001 */ +#define ADC_OR_OP0 ADC_OR_OP0_Msk /*!< ADC internal path to VDDCORE */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register *******************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< ADC multimode master ready flag */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< ADC multimode master group regular end of sampling flag */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< ADC multimode master group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< ADC multimode master group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< ADC multimode master group regular overrun flag */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< ADC multimode master group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< ADC multimode master group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< ADC multimode master analog watchdog 1 flag */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< ADC multimode master analog watchdog 2 flag */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< ADC multimode master analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< ADC multimode master group injected contexts queue overflow flag */ + +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< ADC multimode slave ready flag */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< ADC multimode slave group regular end of sampling flag */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< ADC multimode slave group regular end of unitary conversion flag */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< ADC multimode slave group regular end of sequence conversions flag */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< ADC multimode slave group regular overrun flag */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< ADC multimode slave group injected end of unitary conversion flag */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< ADC multimode slave group injected end of sequence conversions flag */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< ADC multimode slave analog watchdog 1 flag */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< ADC multimode slave analog watchdog 2 flag */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< ADC multimode slave analog watchdog 3 flag */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< ADC multimode slave group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ + +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************************************************************************/ +/* */ +/* AXIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AXIM_ASIB_FNMOD2 register **********/ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_ASIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD2_BYPASS_MERGE AXIM_ASIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_ASIB_READQOS register ********/ +#define AXIM_ASIB_READQOS_AR_QOS_Pos (0U) +#define AXIM_ASIB_READQOS_AR_QOS_Msk (0xFUL << AXIM_ASIB_READQOS_AR_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_READQOS_AR_QOS AXIM_ASIB_READQOS_AR_QOS_Msk /*!< Read channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_WRITEQOS register *******/ +#define AXIM_ASIB_WRITEQOS_AW_QOS_Pos (0U) +#define AXIM_ASIB_WRITEQOS_AW_QOS_Msk (0xFUL << AXIM_ASIB_WRITEQOS_AW_QOS_Pos) /*!< 0x0000000F */ +#define AXIM_ASIB_WRITEQOS_AW_QOS AXIM_ASIB_WRITEQOS_AW_QOS_Msk /*!< Write channel QoS setting */ + +/******************* Bit definition for AXIM_ASIB_FNMOD register **********/ +#define AXIM_ASIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_ASIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_ASIB_FNMOD_READ_ISS AXIM_ASIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_ASIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_ASIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_ASIB_FNMOD_WRITE_ISS AXIM_ASIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMODBMISS register **********/ +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMODBMISS_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODBMISS_READ_ISS AXIM_AMIB_FNMODBMISS_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMODBMISS_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMODBMISS_WRITE_ISS AXIM_AMIB_FNMODBMISS_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************* Bit definition for AXIM_AMIB_FNMOD2 register **********/ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos (0U) +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk (0x1UL << AXIM_AMIB_FNMOD2_BYPASS_MERGE_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD2_BYPASS_MERGE AXIM_AMIB_FNMOD2_BYPASS_MERGE_Msk /*!< Bypass Merge enable */ + +/******************* Bit definition for AXIM_AMIB_FNMODLB register **********/ +#define AXIM_AMIB_FNMODLB_LONG_BURST_Pos (0U) +#define AXIM_AMIB_FNMODLB_LONG_BURST_Msk (0x1UL << AXIM_AMIB_FNMODLB_LONG_BURST_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMODLB_LONG_BURST AXIM_AMIB_FNMODLB_LONG_BURST_Msk /*!< Long bursts can be generated */ + +/******************* Bit definition for AXIM_AMIB_FNMOD register **********/ +#define AXIM_AMIB_FNMOD_READ_ISS_Pos (0U) +#define AXIM_AMIB_FNMOD_READ_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_READ_ISS_Pos) /*!< 0x00000001 */ +#define AXIM_AMIB_FNMOD_READ_ISS AXIM_AMIB_FNMOD_READ_ISS_Msk /*!< Force read issuing capability to 1 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS_Pos (1U) +#define AXIM_AMIB_FNMOD_WRITE_ISS_Msk (0x1UL << AXIM_AMIB_FNMOD_WRITE_ISS_Pos) /*!< 0x00000002 */ +#define AXIM_AMIB_FNMOD_WRITE_ISS AXIM_AMIB_FNMOD_WRITE_ISS_Msk /*!< Force write issuing capability to 1 */ + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT_BASE ((0x16C8UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_EXPONENT ((0x14B8UL - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process protected exponentiation*/ +#define PKA_MODULAR_EXP_PROTECT_IN_MODULUS ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus to process protected exponentiation */ +#define PKA_MODULAR_EXP_PROTECT_IN_PHI ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input phi to process protected exponentiation */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_ERROR ((0x1298UL - PKA_RAM_OFFSET)>>2) /*!< Output error of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x0620UL - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input curve prime order n number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_N_PRIME_ORDER ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input prime order n */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_POINT_CHECK_IN_MONTGOMERY_PARAM ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_B_COEFF ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0x0FE8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0x0F28UL - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0x0F88UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0x0FE0UL - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x1400UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1458UL - PKA_RAM_OFFSET)>>2) /*!< Extended output result point Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x0468UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x04D0UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x0678UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x06D0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0x12F8UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0x1350UL - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x10E0UL - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0x13A8UL - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x0948UL - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x0B60UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0x12A0UL - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x0838UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xE78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic subtraction input data */ +#define PKA_ARITHMETIC_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic subtraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular subtraction input data */ +#define PKA_MODULAR_SUB_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular subtraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_IN_OP_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x0A50UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0x0C68UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0x1088UL - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0x0E78UL - PKA_RAM_OFFSET)>>2) /*!< Output result for arithmetic operations */ + +/* Compute ECC complete addition input data */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_COMPLETE_ADD_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC complete addition output data */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_COMPLETE_ADD_OUT_RESULT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Output result Z coordinate */ + +/* Compute ECC double base ladder input data */ +#define PKA_ECC_DOUBLE_LADDER_IN_PRIME_ORDER_NB_BITS ((0x0400UL - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF_SIGN ((0x0410UL - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_A_COEFF ((0x0418UL - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve '|a|' coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_DOUBLE_LADDER_IN_K_INTEGER ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Input 'k' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_M_INTEGER ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Input 'm' integer coefficient */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_X ((0x0628UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Y ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT1_Z ((0x06D8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Z coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_X ((0x0730UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q X coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Y ((0x0788UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Y coordinate */ +#define PKA_ECC_DOUBLE_LADDER_IN_POINT2_Z ((0x07E0UL - PKA_RAM_OFFSET)>>2) /*!< Input initial point Q Z coordinate */ + +/* Compute ECC double base ladder output data */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate (affine coordinate) */ +#define PKA_ECC_DOUBLE_LADDER_OUT_ERROR ((0x0520UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + +/* Compute ECC projective to affine conversion input data */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_NB_BITS ((0x0408UL - PKA_RAM_OFFSET)>>2) /*!< Input Modulus number of bits */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MOD_P ((0x0470UL - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_X ((0x0D60UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P X coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Y ((0x0DB8UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Y coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_POINT_Z ((0x0E10UL - PKA_RAM_OFFSET)>>2) /*!< Input initial projective point P Z coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_IN_MONTGOMERY_PARAM_R2 ((0x04C8UL - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ + +/* Compute ECC projective to affine conversion output data */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_X ((0x0578UL - PKA_RAM_OFFSET)>>2) /*!< Output result x affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_RESULT_Y ((0x05D0UL - PKA_RAM_OFFSET)>>2) /*!< Output result y affine coordinate */ +#define PKA_ECC_PROJECTIVE_AFF_OUT_ERROR ((0x0680UL - PKA_RAM_OFFSET)>>2) /*!< Output result error */ + + +/******************************************************************************/ +/* */ +/* Parallel Synchronous Slave Interface (PSSI ) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PSSI_CR register *******************/ +#define PSSI_CR_CKPOL_Pos (5U) +#define PSSI_CR_CKPOL_Msk (0x1UL << PSSI_CR_CKPOL_Pos) /*!< 0x00000020 */ +#define PSSI_CR_CKPOL PSSI_CR_CKPOL_Msk /*!< Parallel data clock polarity */ +#define PSSI_CR_DEPOL_Pos (6U) +#define PSSI_CR_DEPOL_Msk (0x1UL << PSSI_CR_DEPOL_Pos) /*!< 0x00000040 */ +#define PSSI_CR_DEPOL PSSI_CR_DEPOL_Msk /*!< Data enable polarity */ +#define PSSI_CR_RDYPOL_Pos (8U) +#define PSSI_CR_RDYPOL_Msk (0x1UL << PSSI_CR_RDYPOL_Pos) /*!< 0x00000100 */ +#define PSSI_CR_RDYPOL PSSI_CR_RDYPOL_Msk /*!< Ready polarity */ +#define PSSI_CR_EDM_Pos (10U) +#define PSSI_CR_EDM_Msk (0x3UL << PSSI_CR_EDM_Pos) /*!< 0x00000C00 */ +#define PSSI_CR_EDM PSSI_CR_EDM_Msk /*!< Extended data mode */ +#define PSSI_CR_ENABLE_Pos (14U) +#define PSSI_CR_ENABLE_Msk (0x1UL << PSSI_CR_ENABLE_Pos) /*!< 0x00004000 */ +#define PSSI_CR_ENABLE PSSI_CR_ENABLE_Msk /*!< PSSI enable */ +#define PSSI_CR_DERDYCFG_Pos (18U) +#define PSSI_CR_DERDYCFG_Msk (0x7UL << PSSI_CR_DERDYCFG_Pos) /*!< 0x001C0000 */ +#define PSSI_CR_DERDYCFG PSSI_CR_DERDYCFG_Msk /*!< Data enable and ready configuration */ +#define PSSI_CR_CKSRC_Pos (29U) +#define PSSI_CR_CKSRC_Msk (0x1UL << PSSI_CR_CKSRC_Pos) /*!< 0x20000000 */ +#define PSSI_CR_CKSRC PSSI_CR_CKSRC_Msk /*!< Clock source */ +#define PSSI_CR_DMAEN_Pos (30U) +#define PSSI_CR_DMAEN_Msk (0x1UL << PSSI_CR_DMAEN_Pos) /*!< 0x40000000 */ +#define PSSI_CR_DMAEN PSSI_CR_DMAEN_Msk /*!< DMA enable */ +#define PSSI_CR_OUTEN_Pos (31U) +#define PSSI_CR_OUTEN_Msk (0x1UL << PSSI_CR_OUTEN_Pos) /*!< 0x80000000 */ +#define PSSI_CR_OUTEN PSSI_CR_OUTEN_Msk /*!< Data direction selection */ + +/******************** Bit definition for PSSI_SR register *******************/ +#define PSSI_SR_RTT4B_Pos (2U) +#define PSSI_SR_RTT4B_Msk (0x1UL << PSSI_SR_RTT4B_Pos) /*!< 0x00000004 */ +#define PSSI_SR_RTT4B PSSI_SR_RTT4B_Msk /*!< Ready to transfer four bytes */ +#define PSSI_SR_RTT1B_Pos (3U) +#define PSSI_SR_RTT1B_Msk (0x1UL << PSSI_SR_RTT1B_Pos) /*!< 0x00000008 */ +#define PSSI_SR_RTT1B PSSI_SR_RTT1B_Msk /*!< Ready to transfer one byte */ + +/******************** Bit definition for PSSI_RIS register ******************/ +#define PSSI_RIS_OVR_RIS_Pos (1U) +#define PSSI_RIS_OVR_RIS_Msk (0x1UL << PSSI_RIS_OVR_RIS_Pos) /*!< 0x00000002 */ +#define PSSI_RIS_OVR_RIS PSSI_RIS_OVR_RIS_Msk /*!< Data buffer overrun/underrun raw interrupt status */ + +/******************** Bit definition for PSSI_IER register ******************/ +#define PSSI_IER_OVR_IE_Pos (1U) +#define PSSI_IER_OVR_IE_Msk (0x1UL << PSSI_IER_OVR_IE_Pos) /*!< 0x00000002 */ +#define PSSI_IER_OVR_IE PSSI_IER_OVR_IE_Msk /*!< Data buffer overrun/underrun interrupt enable */ + +/******************** Bit definition for PSSI_MIS register ******************/ +#define PSSI_MIS_OVR_MIS_Pos (1U) +#define PSSI_MIS_OVR_MIS_Msk (0x1UL << PSSI_MIS_OVR_MIS_Pos) /*!< 0x00000002 */ +#define PSSI_MIS_OVR_MIS PSSI_MIS_OVR_MIS_Msk /*!< Data buffer overrun/underrun masked interrupt status */ + +/******************** Bit definition for PSSI_ICR register ******************/ +#define PSSI_ICR_OVR_ISC_Pos (1U) +#define PSSI_ICR_OVR_ISC_Msk (0x1UL << PSSI_ICR_OVR_ISC_Pos) /*!< 0x00000002 */ +#define PSSI_ICR_OVR_ISC PSSI_ICR_OVR_ISC_Msk /*!< Data buffer overrun/underrun interrupt status clear */ + +/******************** Bit definition for PSSI_DR register *******************/ +#define PSSI_DR_DR_Pos (0U) +#define PSSI_DR_DR_Msk (0xFFFFFFFFUL << PSSI_DR_DR_Pos) /*!< 0xFFFFFFF */ +#define PSSI_DR_DR PSSI_DR_DR_Msk /*!< Data register */ + + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for PWR_CR1 register *******************/ +#define PWR_CR1_SVOS_Pos (0U) +#define PWR_CR1_SVOS_Msk (0x1UL << PWR_CR1_SVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_SVOS PWR_CR1_SVOS_Msk /*!< System STOP mode Voltage Scaling selection. */ + +#define PWR_CR1_PVDE_Pos (4U) +#define PWR_CR1_PVDE_Msk (0x1UL << PWR_CR1_PVDE_Pos) /*!< 0x00000010 */ +#define PWR_CR1_PVDE PWR_CR1_PVDE_Msk /*!< Programmable Voltage detector enable. */ + +#define PWR_CR1_PLS_Pos (5U) +#define PWR_CR1_PLS_Msk (0x7UL << PWR_CR1_PLS_Pos) /*!< 0x000000E0 */ +#define PWR_CR1_PLS PWR_CR1_PLS_Msk /*!< Programmable Voltage Detector level selection */ +#define PWR_CR1_PLS_0 (0x1UL << PWR_CR1_PLS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_PLS_1 (0x2UL << PWR_CR1_PLS_Pos) /*!< 0x00000040 */ +#define PWR_CR1_PLS_2 (0x4UL << PWR_CR1_PLS_Pos) /*!< 0x00000080 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Back-up domain Protection */ + +#define PWR_CR1_FLPS_Pos (9U) +#define PWR_CR1_FLPS_Msk (0x1UL << PWR_CR1_FLPS_Pos) /*!< 0x00000200 */ +#define PWR_CR1_FLPS PWR_CR1_FLPS_Msk /*!< Flash low power mode in STOP */ + +#define PWR_CR1_BOOSTE_Pos (11U) +#define PWR_CR1_BOOSTE_Msk (0x1UL << PWR_CR1_BOOSTE_Pos) /*!< 0x00000800 */ +#define PWR_CR1_BOOSTE PWR_CR1_BOOSTE_Msk /*!< Analog Switch VBoost control. */ + +#define PWR_CR1_AVDREADY_Pos (12) +#define PWR_CR1_AVDREADY_Msk (0x1UL << PWR_CR1_AVDREADY_Pos) /*!< 0x00001000 */ +#define PWR_CR1_AVDREADY PWR_CR1_AVDREADY_Msk /*!< Analog Voltage Ready. */ + +#define PWR_CR1_AVDEN_Pos (13U) +#define PWR_CR1_AVDEN_Msk (0x1UL << PWR_CR1_AVDEN_Pos) /*!< 0x00002000 */ +#define PWR_CR1_AVDEN PWR_CR1_AVDEN_Msk /*!< Analog Voltage Detector Enable */ + +#define PWR_CR1_ALS_Pos (14U) +#define PWR_CR1_ALS_Msk (0x3UL << PWR_CR1_ALS_Pos) /*!< 0x0000A000 */ +#define PWR_CR1_ALS PWR_CR1_ALS_Msk /*!< Analog Voltage Detector level selection */ +#define PWR_CR1_ALS_0 (0x1UL << PWR_CR1_ALS_Pos) /*!< 0x00004000 */ +#define PWR_CR1_ALS_1 (0x2UL << PWR_CR1_ALS_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_ACTVOS_Pos (0U) +#define PWR_SR1_ACTVOS_Msk (0x1UL << PWR_SR1_ACTVOS_Pos) /*!< 0x00000001 */ +#define PWR_SR1_ACTVOS PWR_SR1_ACTVOS_Msk /*!< VOS currently applied for VCORE voltage scaling selection */ + +#define PWR_SR1_ACTVOSRDY_Pos (1U) +#define PWR_SR1_ACTVOSRDY_Msk (0x1UL << PWR_SR1_ACTVOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_SR1_ACTVOSRDY PWR_SR1_ACTVOSRDY_Msk /*!< Ready bit for current actual used VOS for VDD11 Voltage Scaling */ + +#define PWR_SR1_PVDO_Pos (4U) +#define PWR_SR1_PVDO_Msk (0x1UL << PWR_SR1_PVDO_Pos) /*!< 0x00000010 */ +#define PWR_SR1_PVDO PWR_SR1_PVDO_Msk /*!< Programmable Voltage Detect Output */ + +#define PWR_SR1_AVDO_Pos (13U) +#define PWR_SR1_AVDO_Msk (0x1UL << PWR_SR1_AVDO_Pos) /*!< 0x00002000 */ +#define PWR_SR1_AVDO PWR_SR1_AVDO_Msk /*!< Analog Voltage Detect Output on VDDA */ + +/******************** Bit definition for PWR_CSR1 register ********************/ +#define PWR_CSR1_BREN_Pos (0U) +#define PWR_CSR1_BREN_Msk (0x1UL << PWR_CSR1_BREN_Pos) /*!< 0x00000001 */ +#define PWR_CSR1_BREN PWR_CSR1_BREN_Msk /*!< Backup regulator enable */ + +#define PWR_CSR1_MONEN_Pos (4U) +#define PWR_CSR1_MONEN_Msk (0x1UL << PWR_CSR1_MONEN_Pos) /*!< 0x00000010 */ +#define PWR_CSR1_MONEN PWR_CSR1_MONEN_Msk /*!< VBAT and temperature monitoring enable */ + +#define PWR_CSR1_BRRDY_Pos (16U) +#define PWR_CSR1_BRRDY_Msk (0x1UL << PWR_CSR1_BRRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR1_BRRDY PWR_CSR1_BRRDY_Msk /*!< Backup regulator ready */ + +#define PWR_CSR1_VBATL_Pos (20U) +#define PWR_CSR1_VBATL_Msk (0x1UL << PWR_CSR1_VBATL_Pos) /*!< 0x00100000 */ +#define PWR_CSR1_VBATL PWR_CSR1_VBATL_Msk /*!< Monitored VBAT level above low threshold */ + +#define PWR_CSR1_VBATH_Pos (21U) +#define PWR_CSR1_VBATH_Msk (0x1UL << PWR_CSR1_VBATH_Pos) /*!< 0x00200000 */ +#define PWR_CSR1_VBATH PWR_CSR1_VBATH_Msk /*!< Monitored VBAT level above high threshold */ + +#define PWR_CSR1_TEMPL_Pos (22U) +#define PWR_CSR1_TEMPL_Msk (0x1UL << PWR_CSR1_TEMPL_Pos) /*!< 0x00400000 */ +#define PWR_CSR1_TEMPL PWR_CSR1_TEMPL_Msk /*!< Monitored temperature level above low threshold */ + +#define PWR_CSR1_TEMPH_Pos (23U) +#define PWR_CSR1_TEMPH_Msk (0x1UL << PWR_CSR1_TEMPH_Pos) /*!< 0x00800000 */ +#define PWR_CSR1_TEMPH PWR_CSR1_TEMPH_Msk /*!< Monitored temperature level above high threshold */ + +/******************** Bit definition for PWR_CSR2 register ********************/ +#define PWR_CSR2_BYPASS_Pos (0U) +#define PWR_CSR2_BYPASS_Msk (0x1UL << PWR_CSR2_BYPASS_Pos) /*!< 0x00000001 */ +#define PWR_CSR2_BYPASS PWR_CSR2_BYPASS_Msk /*!< Power Management Unit bypass */ + +#define PWR_CSR2_LDOEN_Pos (1U) +#define PWR_CSR2_LDOEN_Msk (0x1UL << PWR_CSR2_LDOEN_Pos) /*!< 0x00000002 */ +#define PWR_CSR2_LDOEN PWR_CSR2_LDOEN_Msk /*!< Low Drop-Out regulator enable */ + +#define PWR_CSR2_SDEN_Pos (2U) +#define PWR_CSR2_SDEN_Msk (0x1UL << PWR_CSR2_SDEN_Pos) /*!< 0x00000004 */ +#define PWR_CSR2_SDEN PWR_CSR2_SDEN_Msk /*!< SMPS Step-down converter enable */ + +#define PWR_CSR2_SMPSEXTHP_Pos (3U) +#define PWR_CSR2_SMPSEXTHP_Msk (0x1UL << PWR_CSR2_SMPSEXTHP_Pos) /*!< 0x00000008 */ +#define PWR_CSR2_SMPSEXTHP PWR_CSR2_SMPSEXTHP_Msk /*!< SMPS external power delivery selection */ + +#define PWR_CSR2_SDHILEVEL_Pos (4U) +#define PWR_CSR2_SDHILEVEL_Msk (0x1UL << PWR_CSR2_SDHILEVEL_Pos) /*!< 0x00000030 */ +#define PWR_CSR2_SDHILEVEL PWR_CSR2_SDHILEVEL_Msk /*!< SMPS step-down converter voltage output for LDO or external supply */ + +#define PWR_CSR2_VBE_Pos (8U) +#define PWR_CSR2_VBE_Msk (0x1UL << PWR_CSR2_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CSR2_VBE PWR_CSR2_VBE_Msk /*!< VBAT charging enable */ + +#define PWR_CSR2_VBRS_Pos (9U) +#define PWR_CSR2_VBRS_Msk (0x1UL << PWR_CSR2_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CSR2_VBRS PWR_CSR2_VBRS_Msk /*!< VBAT charging resistor selection */ + +#define PWR_CSR2_XSPICAP1_Pos (10U) +#define PWR_CSR2_XSPICAP1_Msk (0x3UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000C00 */ +#define PWR_CSR2_XSPICAP1 PWR_CSR2_XSPICAP1_Msk /*!< XSPI port 1 capacitor control bits */ +#define PWR_CSR2_XSPICAP1_0 (0x1UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000400 */ +#define PWR_CSR2_XSPICAP1_1 (0x2UL << PWR_CSR2_XSPICAP1_Pos) /*!< 0x00000800 */ + +#define PWR_CSR2_XSPICAP2_Pos (12U) +#define PWR_CSR2_XSPICAP2_Msk (0x3UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00003000 */ +#define PWR_CSR2_XSPICAP2 PWR_CSR2_XSPICAP2_Msk /*!< XSPI port 2 capacitor control bits */ +#define PWR_CSR2_XSPICAP2_0 (0x1UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00001000 */ +#define PWR_CSR2_XSPICAP2_1 (0x2UL << PWR_CSR2_XSPICAP2_Pos) /*!< 0x00002000 */ + +#define PWR_CSR2_EN_XSPIM1_Pos (14U) +#define PWR_CSR2_EN_XSPIM1_Msk (0x1UL << PWR_CSR2_EN_XSPIM1_Pos) /*!< 0x00004000 */ +#define PWR_CSR2_EN_XSPIM1 PWR_CSR2_EN_XSPIM1_Msk /*!< XSPIM1 external supply enable */ + +#define PWR_CSR2_EN_XSPIM2_Pos (15U) +#define PWR_CSR2_EN_XSPIM2_Msk (0x1UL << PWR_CSR2_EN_XSPIM2_Pos) /*!< 0x00008000 */ +#define PWR_CSR2_EN_XSPIM2 PWR_CSR2_EN_XSPIM2_Msk /*!< XSPIM2 external supply enable */ + +#define PWR_CSR2_SDEXTRDY_Pos (16U) +#define PWR_CSR2_SDEXTRDY_Msk (0x1UL << PWR_CSR2_SDEXTRDY_Pos) /*!< 0x00010000 */ +#define PWR_CSR2_SDEXTRDY PWR_CSR2_SDEXTRDY_Msk /*!< SMPS External supply ready */ + +#define PWR_CSR2_USB33DEN_Pos (24U) +#define PWR_CSR2_USB33DEN_Msk (0x1UL << PWR_CSR2_USB33DEN_Pos) /*!< 0x01000000 */ +#define PWR_CSR2_USB33DEN PWR_CSR2_USB33DEN_Msk /*!< VDD33_USB voltage level detector enable */ + +#define PWR_CSR2_USBREGEN_Pos (25U) +#define PWR_CSR2_USBREGEN_Msk (0x1UL << PWR_CSR2_USBREGEN_Pos) /*!< 0x02000000 */ +#define PWR_CSR2_USBREGEN PWR_CSR2_USBREGEN_Msk /*!< USB regulator enable */ + +#define PWR_CSR2_USB33RDY_Pos (26U) +#define PWR_CSR2_USB33RDY_Msk (0x1UL << PWR_CSR2_USB33RDY_Pos) /*!< 0x04000000 */ +#define PWR_CSR2_USB33RDY PWR_CSR2_USB33RDY_Msk /*!< USB supply ready */ + +#define PWR_CSR2_USBHSREGEN_Pos (27U) +#define PWR_CSR2_USBHSREGEN_Msk (0x1UL << PWR_CSR2_USBHSREGEN_Pos) /*!< 0x08000000 */ +#define PWR_CSR2_USBHSREGEN PWR_CSR2_USBHSREGEN_Msk /*!< USB HS regulator enable */ + +/******************** Bit definition for PWR_CSR3 register ********************/ +#define PWR_CSR3_PDDS_Pos (0U) +#define PWR_CSR3_PDDS_Msk (0x1UL << PWR_CSR3_PDDS_Pos) /*!< 0x00000001 */ +#define PWR_CSR3_PDDS PWR_CSR3_PDDS_Msk /*!< D1 domain Power Down Deepsleep */ + +#define PWR_CSR3_CSSF_Pos (1U) +#define PWR_CSR3_CSSF_Msk (0x1UL << PWR_CSR3_CSSF_Pos) /*!< 0x00000002 */ +#define PWR_CSR3_CSSF PWR_CSR3_CSSF_Msk /*!< Clear Standby and Stop flag */ + +#define PWR_CSR3_STOPF_Pos (8U) +#define PWR_CSR3_STOPF_Msk (0x1UL << PWR_CSR3_STOPF_Pos) /*!< 0x00000080 */ +#define PWR_CSR3_STOPF PWR_CSR3_STOPF_Msk /*!< STOP Flag */ + +#define PWR_CSR3_SBF_Pos (9U) +#define PWR_CSR3_SBF_Msk (0x1UL << PWR_CSR3_SBF_Pos) /*!< 0x00000100 */ +#define PWR_CSR3_SBF PWR_CSR3_SBF_Msk /*!< System STANDBY Flag */ + +/******************** Bit definition for PWR_CSR4 register ********************/ +#define PWR_CSR4_VOS_Pos (0U) +#define PWR_CSR4_VOS_Msk (0x1UL << PWR_CSR4_VOS_Pos) /*!< 0x00000001 */ +#define PWR_CSR4_VOS PWR_CSR4_VOS_Msk /*!< Voltage Scaling selection according performance */ + +#define PWR_CSR4_VOSRDY_Pos (1U) +#define PWR_CSR4_VOSRDY_Msk (0x1UL << PWR_CSR4_VOSRDY_Pos) /*!< 0x00000002 */ +#define PWR_CSR4_VOSRDY PWR_CSR4_VOSRDY_Msk /*!< VOSRDY: VOS Ready bit for VCORE voltage scaling output selection. */ + +/******************** Bit definition for PWR_WKUPCR register ********************/ +#define PWR_WKUPCR_WKUPC_Pos (0U) +#define PWR_WKUPCR_WKUPC_Msk (0xFUL << PWR_WKUPCR_WKUPC_Pos) /*!< 0x0000000F */ +#define PWR_WKUPCR_WKUPC PWR_WKUPCR_WKUPC_Msk /*!< Clear Wakeup Pin Flag 1 to 4 */ +#define PWR_WKUPCR_WKUPC1_Pos (0U) +#define PWR_WKUPCR_WKUPC1_Msk (0x1UL << PWR_WKUPCR_WKUPC1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1_Msk /*!< Clear Wakeup Pin Flag 1 */ +#define PWR_WKUPCR_WKUPC2_Pos (1U) +#define PWR_WKUPCR_WKUPC2_Msk (0x1UL << PWR_WKUPCR_WKUPC2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2_Msk /*!< Clear Wakeup Pin Flag 2 */ +#define PWR_WKUPCR_WKUPC3_Pos (2U) +#define PWR_WKUPCR_WKUPC3_Msk (0x1UL << PWR_WKUPCR_WKUPC3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3_Msk /*!< Clear Wakeup Pin Flag 3 */ +#define PWR_WKUPCR_WKUPC4_Pos (3U) +#define PWR_WKUPCR_WKUPC4_Msk (0x1UL << PWR_WKUPCR_WKUPC4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4_Msk /*!< Clear Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPFR register ********************/ +#define PWR_WKUPFR_WKUPF1_Pos (0U) +#define PWR_WKUPFR_WKUPF1_Msk (0x1UL << PWR_WKUPFR_WKUPF1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1_Msk /*!< Wakeup Pin Flag 1 */ +#define PWR_WKUPFR_WKUPF2_Pos (1U) +#define PWR_WKUPFR_WKUPF2_Msk (0x1UL << PWR_WKUPFR_WKUPF2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2_Msk /*!< Wakeup Pin Flag 2 */ +#define PWR_WKUPFR_WKUPF3_Pos (2U) +#define PWR_WKUPFR_WKUPF3_Msk (0x1UL << PWR_WKUPFR_WKUPF3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3_Msk /*!< Wakeup Pin Flag 3 */ +#define PWR_WKUPFR_WKUPF4_Pos (3U) +#define PWR_WKUPFR_WKUPF4_Msk (0x1UL << PWR_WKUPFR_WKUPF4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4_Msk /*!< Wakeup Pin Flag 4 */ + +/******************** Bit definition for PWR_WKUPEPR register ********************/ +#define PWR_WKUPEPR_WKUPEN_Pos (0U) +#define PWR_WKUPEPR_WKUPEN_Msk (0x0FUL << PWR_WKUPEPR_WKUPEN_Pos) /*!< 0x0000000F */ +#define PWR_WKUPEPR_WKUPEN PWR_WKUPEPR_WKUPEN_Msk /*!< Enable all Wakeup Pin */ +#define PWR_WKUPEPR_WKUPEN1_Pos (0U) +#define PWR_WKUPEPR_WKUPEN1_Msk (0x1UL << PWR_WKUPEPR_WKUPEN1_Pos) /*!< 0x00000001 */ +#define PWR_WKUPEPR_WKUPEN1 PWR_WKUPEPR_WKUPEN1_Msk /*!< Enable Wakeup Pin WKUP1 */ +#define PWR_WKUPEPR_WKUPEN2_Pos (1U) +#define PWR_WKUPEPR_WKUPEN2_Msk (0x1UL << PWR_WKUPEPR_WKUPEN2_Pos) /*!< 0x00000002 */ +#define PWR_WKUPEPR_WKUPEN2 PWR_WKUPEPR_WKUPEN2_Msk /*!< Enable Wakeup Pin WKUP2 */ +#define PWR_WKUPEPR_WKUPEN3_Pos (2U) +#define PWR_WKUPEPR_WKUPEN3_Msk (0x1UL << PWR_WKUPEPR_WKUPEN3_Pos) /*!< 0x00000004 */ +#define PWR_WKUPEPR_WKUPEN3 PWR_WKUPEPR_WKUPEN3_Msk /*!< Enable Wakeup Pin WKUP3 */ +#define PWR_WKUPEPR_WKUPEN4_Pos (3U) +#define PWR_WKUPEPR_WKUPEN4_Msk (0x1UL << PWR_WKUPEPR_WKUPEN4_Pos) /*!< 0x00000008 */ +#define PWR_WKUPEPR_WKUPEN4 PWR_WKUPEPR_WKUPEN4_Msk /*!< Enable Wakeup Pin WKUP4 */ + +#define PWR_WKUPEPR_WKUPP_Pos (8U) +#define PWR_WKUPEPR_WKUPP_Msk (0x0FUL << PWR_WKUPEPR_WKUPP_Pos) /*!< 0x0000F00 */ +#define PWR_WKUPEPR_WKUPP PWR_WKUPEPR_WKUPP_Msk /*!< Wakeup Pin Polarity for WKUP1 to WKUP4 */ +#define PWR_WKUPEPR_WKUPP1_Pos (8U) +#define PWR_WKUPEPR_WKUPP1_Msk (0x1UL << PWR_WKUPEPR_WKUPP1_Pos) /*!< 0x00000100 */ +#define PWR_WKUPEPR_WKUPP1 PWR_WKUPEPR_WKUPP1_Msk /*!< Wakeup Pin Polarity for WKUP1 */ +#define PWR_WKUPEPR_WKUPP2_Pos (9U) +#define PWR_WKUPEPR_WKUPP2_Msk (0x1UL << PWR_WKUPEPR_WKUPP2_Pos) /*!< 0x00000200 */ +#define PWR_WKUPEPR_WKUPP2 PWR_WKUPEPR_WKUPP2_Msk /*!< Wakeup Pin Polarity for WKUP2 */ +#define PWR_WKUPEPR_WKUPP3_Pos (10U) +#define PWR_WKUPEPR_WKUPP3_Msk (0x1UL << PWR_WKUPEPR_WKUPP3_Pos) /*!< 0x00000400 */ +#define PWR_WKUPEPR_WKUPP3 PWR_WKUPEPR_WKUPP3_Msk /*!< Wakeup Pin Polarity for WKUP3 */ +#define PWR_WKUPEPR_WKUPP4_Pos (11U) +#define PWR_WKUPEPR_WKUPP4_Msk (0x1UL << PWR_WKUPEPR_WKUPP4_Pos) /*!< 0x00000800 */ +#define PWR_WKUPEPR_WKUPP4 PWR_WKUPEPR_WKUPP4_Msk /*!< Wakeup Pin Polarity for WKUP4 */ + +#define PWR_WKUPEPR_WKUPPUPD1_Pos (16U) +#define PWR_WKUPEPR_WKUPPUPD1_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00030000 */ +#define PWR_WKUPEPR_WKUPPUPD1 PWR_WKUPEPR_WKUPPUPD1_Msk /*!< Wakeup Pin pull configuration for WKUP1 */ +#define PWR_WKUPEPR_WKUPPUPD1_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00010000 */ +#define PWR_WKUPEPR_WKUPPUPD1_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD1_Pos) /*!< 0x00020000 */ +#define PWR_WKUPEPR_WKUPPUPD2_Pos (18U) +#define PWR_WKUPEPR_WKUPPUPD2_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x000C0000 */ +#define PWR_WKUPEPR_WKUPPUPD2 PWR_WKUPEPR_WKUPPUPD2_Msk /*!< Wakeup Pin pull configuration for WKUP2 */ +#define PWR_WKUPEPR_WKUPPUPD2_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00040000 */ +#define PWR_WKUPEPR_WKUPPUPD2_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD2_Pos) /*!< 0x00080000 */ +#define PWR_WKUPEPR_WKUPPUPD3_Pos (20U) +#define PWR_WKUPEPR_WKUPPUPD3_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00300000 */ +#define PWR_WKUPEPR_WKUPPUPD3 PWR_WKUPEPR_WKUPPUPD3_Msk /*!< Wakeup Pin pull configuration for WKUP3 */ +#define PWR_WKUPEPR_WKUPPUPD3_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00100000 */ +#define PWR_WKUPEPR_WKUPPUPD3_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD3_Pos) /*!< 0x00200000 */ +#define PWR_WKUPEPR_WKUPPUPD4_Pos (22U) +#define PWR_WKUPEPR_WKUPPUPD4_Msk (0x3UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00C00000 */ +#define PWR_WKUPEPR_WKUPPUPD4 PWR_WKUPEPR_WKUPPUPD4_Msk /*!< Wakeup Pin pull configuration for WKUP4 */ +#define PWR_WKUPEPR_WKUPPUPD4_0 (0x1UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00400000 */ +#define PWR_WKUPEPR_WKUPPUPD4_1 (0x2UL << PWR_WKUPEPR_WKUPPUPD4_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for PWR_UCPDRR register ********************/ +#define PWR_UCPDR_UCPD_DBDIS_Pos (0U) +#define PWR_UCPDR_UCPD_DBDIS_Msk (0x1UL << PWR_UCPDR_UCPD_DBDIS_Pos) /*!< 0x00000001 */ +#define PWR_UCPDR_UCPD_DBDIS PWR_UCPDR_UCPD_DBDIS_Msk /*!< UCPD dead battery disable */ + +#define PWR_UCPDR_UCPD_STBY_Pos (1U) +#define PWR_UCPDR_UCPD_STBY_Msk (0x1UL << PWR_UCPDR_UCPD_STBY_Pos) /*!< 0x00000002 */ +#define PWR_UCPDR_UCPD_STBY PWR_UCPDR_UCPD_STBY_Msk /*!< UCPD Standby mode */ + +/******************** Bit definition for PWR_APCR register ********************/ +#define PWR_APCR_APC_Pos (0U) +#define PWR_APCR_APC_Msk (0x1UL << PWR_APCR_APC_Pos) /*!< 0x00000001 */ +#define PWR_APCR_APC PWR_APCR_APC_Msk /*!< Apply pull configuration register */ + +#define PWR_APCR_PN7_PUPD_Pos (16U) +#define PWR_APCR_PN7_PUPD_Msk (0x1UL << PWR_APCR_PN7_PUPD_Pos) /*!< 0x00010000 */ +#define PWR_APCR_PN7_PUPD PWR_APCR_PN7_PUPD_Msk /*!< Port N bit 7 pull-up/down configuration */ + +#define PWR_APCR_PO5_PUPD_Pos (17) +#define PWR_APCR_PO5_PUPD_Msk (0x1UL << PWR_APCR_PO5_PUPD_Pos) /*!< 0x00020000 */ +#define PWR_APCR_PO5_PUPD PWR_APCR_PO5_PUPD_Msk /*!< Port O bit 5 pull-up/down configuration */ + +#define PWR_APCR_I3CPB6_PU_Pos (28U) +#define PWR_APCR_I3CPB6_PU_Msk (0x1UL << PWR_APCR_I3CPB6_PU_Pos) /*!< 0x10000000 */ +#define PWR_APCR_I3CPB6_PU PWR_APCR_I3CPB6_PU_Msk /*!< Port PB6 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB7_PU_Pos (29U) +#define PWR_APCR_I3CPB7_PU_Msk (0x1UL << PWR_APCR_I3CPB7_PU_Pos) /*!< 0x20000000 */ +#define PWR_APCR_I3CPB7_PU PWR_APCR_I3CPB7_PU_Msk /*!< Port PB7 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB8_PU_Pos (30U) +#define PWR_APCR_I3CPB8_PU_Msk (0x1UL << PWR_APCR_I3CPB8_PU_Pos) /*!< 0x40000000 */ +#define PWR_APCR_I3CPB8_PU PWR_APCR_I3CPB8_PU_Msk /*!< Port PB8 I3C pull-up bit configuration */ + +#define PWR_APCR_I3CPB9_PU_Pos (31U) +#define PWR_APCR_I3CPB9_PU_Msk (0x1UL << PWR_APCR_I3CPB9_PU_Pos) /*!< 0x80000000 */ +#define PWR_APCR_I3CPB9_PU PWR_APCR_I3CPB9_PU_Msk /*!< Port PB9 I3C pull-up bit configuration */ + +/******************** Bit definition for PWR_PUCRN register ********************/ +#define PWR_PUCRN_PUN1_Pos (1U) +#define PWR_PUCRN_PUN1_Msk (0x1UL << PWR_PUCRN_PUN1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRN_PUN1 PWR_PUCRN_PUN1_Msk /*!< PUN1: Port N pull-up */ + +#define PWR_PUCRN_PUN6_Pos (6U) +#define PWR_PUCRN_PUN6_Msk (0x1UL << PWR_PUCRN_PUN6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRN_PUN6 PWR_PUCRN_PUN6_Msk /*!< PUN6: Port N pull-up */ + +#define PWR_PUCRN_PUN12_Pos (12U) +#define PWR_PUCRN_PUN12_Msk (0x1UL << PWR_PUCRN_PUN12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRN_PUN12 PWR_PUCRN_PUN12_Msk /*!< PUN12: Port N pull-up */ + +/******************** Bit definition for PWR_PDCRN register ********************/ +#define PWR_PDCRN_PDN0_Pos (0U) +#define PWR_PDCRN_PDN0_Msk (0x1UL << PWR_PDCRN_PDN0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRN_PDN0 PWR_PDCRN_PDN0_Msk /*!< PDN0: Port N pull-down */ + +#define PWR_PDCRN_PDN1_Pos (1U) +#define PWR_PDCRN_PDN1_Msk (0x1UL << PWR_PDCRN_PDN1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRN_PDN1 PWR_PDCRN_PDN1_Msk /*!< PDN1: Port N pull-down */ + +#define PWR_PDCRN_PDN2N5_Pos (2U) +#define PWR_PDCRN_PDN2N5_Msk (0x1UL << PWR_PDCRN_PDN2N5_Pos) /*!< 0x00000004 */ +#define PWR_PDCRN_PDN2N5 PWR_PDCRN_PDN2N5_Msk /*!< PDN2 to PDN5: Port N pull-down */ + +#define PWR_PDCRN_PDN6_Pos (6U) +#define PWR_PDCRN_PDN6_Msk (0x1UL << PWR_PDCRN_PDN6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRN_PDN6 PWR_PDCRN_PDN6_Msk /*!< PDN6: Port N pull-down */ + +#define PWR_PDCRN_PDN8N11_Pos (8U) +#define PWR_PDCRN_PDN8N11_Msk (0x1UL << PWR_PDCRN_PDN8N11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRN_PDN8N11 PWR_PDCRN_PDN8N11_Msk /*!< PDN8 to PDN11: Port N pull-down */ + +#define PWR_PDCRN_PDN12_Pos (12U) +#define PWR_PDCRN_PDN12_Msk (0x1UL << PWR_PDCRN_PDN12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRN_PDN12 PWR_PDCRN_PDN12_Msk /*!< PDN12: Port N pull-down */ + +/******************** Bit definition for PWR_PUCRO register ********************/ +#define PWR_PUCRO_PUO0_Pos (0U) +#define PWR_PUCRO_PUO0_Msk (0x1UL << PWR_PUCRO_PUO0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRO_PUO0 PWR_PUCRO_PUO0_Msk /*!< PUO0: Port O pull-up */ + +#define PWR_PUCRO_PUO1_Pos (1U) +#define PWR_PUCRO_PUO1_Msk (0x1UL << PWR_PUCRO_PUO1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRO_PUO1 PWR_PUCRO_PUO1_Msk /*!< PUO1: Port O pull-up */ + +#define PWR_PUCRO_PUO4_Pos (4U) +#define PWR_PUCRO_PUO4_Msk (0x1UL << PWR_PUCRO_PUO4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRO_PUO4 PWR_PUCRO_PUO4_Msk /*!< PUO4: Port O pull-up */ + +/******************** Bit definition for PWR_PDCRO register ********************/ +#define PWR_PDCRO_PDO0_Pos (0U) +#define PWR_PDCRO_PDO0_Msk (0x1UL << PWR_PDCRO_PDO0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRO_PDO0 PWR_PDCRO_PDO0_Msk /*!< PDO0: Port O pull-down */ + +#define PWR_PDCRO_PDO1_Pos (1U) +#define PWR_PDCRO_PDO1_Msk (0x1UL << PWR_PDCRO_PDO1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRO_PDO1 PWR_PDCRO_PDO1_Msk /*!< PDO1: Port O pull-down */ + +#define PWR_PDCRO_PDO2_Pos (2U) +#define PWR_PDCRO_PDO2_Msk (0x1UL << PWR_PDCRO_PDO2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRO_PDO2 PWR_PDCRO_PDO2_Msk /*!< PDO2: Port O pull-down */ + +#define PWR_PDCRO_PDO3_Pos (3U) +#define PWR_PDCRO_PDO3_Msk (0x1UL << PWR_PDCRO_PDO3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRO_PDO3 PWR_PDCRO_PDO3_Msk /*!< PDO3: Port O pull-down */ + +#define PWR_PDCRO_PDO4_Pos (4U) +#define PWR_PDCRO_PDO4_Msk (0x1UL << PWR_PDCRO_PDO4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRO_PDO4 PWR_PDCRO_PDO4_Msk /*!< PDO4: Port O pull-down */ + +/******************** Bit definition for PWR_PDCRP register ********************/ +#define PWR_PDCRP_PDP0P3_Pos (0U) +#define PWR_PDCRP_PDP0P3_Msk (0x1UL << PWR_PDCRP_PDP0P3_Pos) /*!< 0x00000001 */ +#define PWR_PDCRP_PDP0P3 PWR_PDCRP_PDP0P3_Msk /*!< PPO0 to PP03 : Port P pull-down */ + +#define PWR_PDCRP_PDP4P7_Pos (4U) +#define PWR_PDCRP_PDP4P7_Msk (0x1UL << PWR_PDCRP_PDP4P7_Pos) /*!< 0x00000010 */ +#define PWR_PDCRP_PDP4P7 PWR_PDCRP_PDP4P7_Msk /*!< PPO4 to PP07 : Port P pull-down */ + +#define PWR_PDCRP_PDP8P11_Pos (8U) +#define PWR_PDCRP_PDP8P11_Msk (0x1UL << PWR_PDCRP_PDP8P11_Pos) /*!< 0x00000100 */ +#define PWR_PDCRP_PDP8P11 PWR_PDCRP_PDP8P11_Msk /*!< PPO8 to PP11 : Port P pull-down */ + +#define PWR_PDCRP_PDP12P15_Pos (12U) +#define PWR_PDCRP_PDP12P15_Msk (0x1UL << PWR_PDCRP_PDP12P15_Pos) /*!< 0x00001000 */ +#define PWR_PDCRP_PDP12P15 PWR_PDCRP_PDP12P15_Msk /*!< PP12 to PP15 : Port P pull-down */ + + +/******************************************************************************/ +/* */ +/* RAM ECC monitoring */ +/* */ +/******************************************************************************/ +/****************** Bit definition for RAMECC_IER register ******************/ +#define RAMECC_IER_GIE_Pos (0U) +#define RAMECC_IER_GIE_Msk (0x1UL << RAMECC_IER_GIE_Pos) /*!< 0x00000001 */ +#define RAMECC_IER_GIE RAMECC_IER_GIE_Msk /*!< Global interrupt enable */ +#define RAMECC_IER_GECCSEIE_Pos (1U) +#define RAMECC_IER_GECCSEIE_Msk (0x1UL << RAMECC_IER_GECCSEIE_Pos) /*!< 0x00000002 */ +#define RAMECC_IER_GECCSEIE RAMECC_IER_GECCSEIE_Msk /*!< Global ECC single error interrupt enable */ +#define RAMECC_IER_GECCDEIE_Pos (2U) +#define RAMECC_IER_GECCDEIE_Msk (0x1UL << RAMECC_IER_GECCDEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_IER_GECCDEIE RAMECC_IER_GECCDEIE_Msk /*!< Global ECC double error interrupt enable */ +#define RAMECC_IER_GECCDEBWIE_Pos (3U) +#define RAMECC_IER_GECCDEBWIE_Msk (0x1UL << RAMECC_IER_GECCDEBWIE_Pos) /*!< 0x00000008 */ +#define RAMECC_IER_GECCDEBWIE RAMECC_IER_GECCDEBWIE_Msk /*!< Global ECC double error on byte write (BW) interrupt enable */ + +/******************* Bit definition for RAMECC_CR register ******************/ +#define RAMECC_CR_ECCSEIE_Pos (2U) +#define RAMECC_CR_ECCSEIE_Msk (0x1UL << RAMECC_CR_ECCSEIE_Pos) /*!< 0x00000004 */ +#define RAMECC_CR_ECCSEIE RAMECC_CR_ECCSEIE_Msk /*!< ECC single error interrupt enable */ +#define RAMECC_CR_ECCDEIE_Pos (3U) +#define RAMECC_CR_ECCDEIE_Msk (0x1UL << RAMECC_CR_ECCDEIE_Pos) /*!< 0x00000008 */ +#define RAMECC_CR_ECCDEIE RAMECC_CR_ECCDEIE_Msk /*!< ECC double error interrupt enable */ +#define RAMECC_CR_ECCDEBWIE_Pos (4U) +#define RAMECC_CR_ECCDEBWIE_Msk (0x1UL << RAMECC_CR_ECCDEBWIE_Pos) /*!< 0x00000010 */ +#define RAMECC_CR_ECCDEBWIE RAMECC_CR_ECCDEBWIE_Msk /*!< ECC double error on byte write (BW) interrupt enable */ +#define RAMECC_CR_ECCELEN_Pos (5U) +#define RAMECC_CR_ECCELEN_Msk (0x1UL << RAMECC_CR_ECCELEN_Pos) /*!< 0x00000020 */ +#define RAMECC_CR_ECCELEN RAMECC_CR_ECCELEN_Msk /*!< ECC error latching enable */ + +/******************* Bit definition for RAMECC_SR register ******************/ +#define RAMECC_SR_SEDCF_Pos (0U) +#define RAMECC_SR_SEDCF_Msk (0x1UL << RAMECC_SR_SEDCF_Pos) /*!< 0x00000001 */ +#define RAMECC_SR_SEDCF RAMECC_SR_SEDCF_Msk /*!< ECC single error detected and corrected flag */ +#define RAMECC_SR_DEDF_Pos (1U) +#define RAMECC_SR_DEDF_Msk (0x1UL << RAMECC_SR_DEDF_Pos) /*!< 0x00000002 */ +#define RAMECC_SR_DEDF RAMECC_SR_DEDF_Msk /*!< ECC double error detected flag */ +#define RAMECC_SR_DEBWDF_Pos (2U) +#define RAMECC_SR_DEBWDF_Msk (0x1UL << RAMECC_SR_DEBWDF_Pos) /*!< 0x00000004 */ +#define RAMECC_SR_DEBWDF RAMECC_SR_DEBWDF_Msk /*!< ECC double error on byte write (BW) detected flag */ + +/****************** Bit definition for RAMECC_FAR register ******************/ +#define RAMECC_FAR_FADD_Pos (0U) +#define RAMECC_FAR_FADD_Msk (0xFFFFFFFFUL << RAMECC_FAR_FADD_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FAR_FADD RAMECC_FAR_FADD_Msk /*!< ECC error failing address */ + +/****************** Bit definition for RAMECC_FDRL register *****************/ +#define RAMECC_FDRL_FDATAL_Pos (0U) +#define RAMECC_FDRL_FDATAL_Msk (0xFFFFFFFFUL << RAMECC_FDRL_FDATAL_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRL_FDATAL RAMECC_FDRL_FDATAL_Msk /*!< Failing data low */ + +/****************** Bit definition for RAMECC_FDRH register *****************/ +#define RAMECC_FDRH_FDATAH_Pos (0U) +#define RAMECC_FDRH_FDATAH_Msk (0xFFFFFFFFUL << RAMECC_FDRH_FDATAH_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FDRH_FDATAH RAMECC_FDRH_FDATAH_Msk /* Failing data high (64-bit memory) */ + +/***************** Bit definition for RAMECC_FECR register ******************/ +#define RAMECC_FECR_FEC_Pos (0U) +#define RAMECC_FECR_FEC_Msk (0xFFFFFFFFUL << RAMECC_FECR_FEC_Pos) /*!< 0xFFFFFFFF */ +#define RAMECC_FECR_FEC RAMECC_FECR_FEC_Msk /*!< Failing error code */ + + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION_Pos (0U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIKERON_Pos (1U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000002 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed clock enable in Stop mode */ +#define RCC_CR_HSIRDY_Pos (2U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000004 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSIDIV_Pos (3U) +#define RCC_CR_HSIDIV_Msk (0x3UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000018 */ +#define RCC_CR_HSIDIV RCC_CR_HSIDIV_Msk /*!< Internal High Speed clock divider selection */ +#define RCC_CR_HSIDIV_0 (0x1UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000008 */ +#define RCC_CR_HSIDIV_1 (0x2UL << RCC_CR_HSIDIV_Pos) /*!< 0x00000010 */ + +#define RCC_CR_HSIDIVF_Pos (5U) +#define RCC_CR_HSIDIVF_Msk (0x1UL << RCC_CR_HSIDIVF_Pos) /*!< 0x00000020 */ +#define RCC_CR_HSIDIVF RCC_CR_HSIDIVF_Msk /*!< HSI Divider flag */ +#define RCC_CR_CSION_Pos (7U) +#define RCC_CR_CSION_Msk (0x1UL << RCC_CR_CSION_Pos) /*!< 0x00000080 */ +#define RCC_CR_CSION RCC_CR_CSION_Msk /*!< The Internal RC 4MHz oscillator clock enable */ +#define RCC_CR_CSIRDY_Pos (8U) +#define RCC_CR_CSIRDY_Msk (0x1UL << RCC_CR_CSIRDY_Pos) /*!< 0x00000100 */ +#define RCC_CR_CSIRDY RCC_CR_CSIRDY_Msk /*!< The Internal RC 4MHz oscillator clock ready */ +#define RCC_CR_CSIKERON_Pos (9U) +#define RCC_CR_CSIKERON_Msk (0x1UL << RCC_CR_CSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_CSIKERON RCC_CR_CSIKERON_Msk /*!< Internal RC 4MHz oscillator clock enable in Stop mode */ +#define RCC_CR_HSI48ON_Pos (12U) +#define RCC_CR_HSI48ON_Msk (0x1UL << RCC_CR_HSI48ON_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSI48ON RCC_CR_HSI48ON_Msk /*!< HSI48 clock enable clock enable */ +#define RCC_CR_HSI48RDY_Pos (13U) +#define RCC_CR_HSI48RDY_Msk (0x1UL << RCC_CR_HSI48RDY_Pos) /*!< 0x00002000 */ +#define RCC_CR_HSI48RDY RCC_CR_HSI48RDY_Msk /*!< HSI48 clock ready flag */ +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP_Pos (18U) +#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ +#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock bypass */ +#define RCC_CR_HSEEXT_Pos (19U) +#define RCC_CR_HSEEXT_Msk (0x1UL << RCC_CR_HSEEXT_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEEXT RCC_CR_HSEEXT_Msk /*!< External High Speed clock type in bypass mode */ +#define RCC_CR_HSECSSON_Pos (20U) +#define RCC_CR_HSECSSON_Msk (0x1UL << RCC_CR_HSECSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_HSECSSON RCC_CR_HSECSSON_Msk /*!< HSE Clock security System enable */ +#define RCC_CR_PLL1ON_Pos (24U) +#define RCC_CR_PLL1ON_Msk (0x1UL << RCC_CR_PLL1ON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLL1ON RCC_CR_PLL1ON_Msk /*!< System PLL1 clock enable */ +#define RCC_CR_PLL1RDY_Pos (25U) +#define RCC_CR_PLL1RDY_Msk (0x1UL << RCC_CR_PLL1RDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLL1RDY RCC_CR_PLL1RDY_Msk /*!< System PLL1 clock ready flag */ +#define RCC_CR_PLL2ON_Pos (26U) +#define RCC_CR_PLL2ON_Msk (0x1UL << RCC_CR_PLL2ON_Pos) /*!< 0x04000000 */ +#define RCC_CR_PLL2ON RCC_CR_PLL2ON_Msk /*!< System PLL2 clock enable */ +#define RCC_CR_PLL2RDY_Pos (27U) +#define RCC_CR_PLL2RDY_Msk (0x1UL << RCC_CR_PLL2RDY_Pos) /*!< 0x08000000 */ +#define RCC_CR_PLL2RDY RCC_CR_PLL2RDY_Msk /*!< System PLL2 clock ready flag */ +#define RCC_CR_PLL3ON_Pos (28U) +#define RCC_CR_PLL3ON_Msk (0x1UL << RCC_CR_PLL3ON_Pos) /*!< 0x10000000 */ +#define RCC_CR_PLL3ON RCC_CR_PLL3ON_Msk /*!< System PLL3 clock enable */ +#define RCC_CR_PLL3RDY_Pos (29U) +#define RCC_CR_PLL3RDY_Msk (0x1UL << RCC_CR_PLL3RDY_Pos) /*!< 0x20000000 */ +#define RCC_CR_PLL3RDY RCC_CR_PLL3RDY_Msk /*!< System PLL3 clock ready flag */ + +/******************** Bit definition for RCC_HSICFGR register ***************/ +/*!< HSICAL configuration */ +#define RCC_HSICFGR_HSICAL_Pos (0U) +#define RCC_HSICFGR_HSICAL_Msk (0xFFFUL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000FFF */ +#define RCC_HSICFGR_HSICAL RCC_HSICFGR_HSICAL_Msk /*!< HSICAL[11:0] bits */ +#define RCC_HSICFGR_HSICAL_0 (0x001UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000001 */ +#define RCC_HSICFGR_HSICAL_1 (0x002UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000002 */ +#define RCC_HSICFGR_HSICAL_2 (0x004UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000004 */ +#define RCC_HSICFGR_HSICAL_3 (0x008UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000008 */ +#define RCC_HSICFGR_HSICAL_4 (0x010UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000010 */ +#define RCC_HSICFGR_HSICAL_5 (0x020UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000020 */ +#define RCC_HSICFGR_HSICAL_6 (0x040UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000040 */ +#define RCC_HSICFGR_HSICAL_7 (0x080UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000080 */ +#define RCC_HSICFGR_HSICAL_8 (0x100UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000100 */ +#define RCC_HSICFGR_HSICAL_9 (0x200UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000200 */ +#define RCC_HSICFGR_HSICAL_10 (0x400UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000400 */ +#define RCC_HSICFGR_HSICAL_11 (0x800UL << RCC_HSICFGR_HSICAL_Pos) /*!< 0x00000800 */ + +/*!< HSITRIM configuration */ +#define RCC_HSICFGR_HSITRIM_Pos (24U) +#define RCC_HSICFGR_HSITRIM_Msk (0x7FUL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_HSICFGR_HSITRIM RCC_HSICFGR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_HSICFGR_HSITRIM_0 (0x01UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_HSICFGR_HSITRIM_1 (0x02UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_HSICFGR_HSITRIM_2 (0x04UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_HSICFGR_HSITRIM_3 (0x08UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_HSICFGR_HSITRIM_4 (0x10UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_HSICFGR_HSITRIM_5 (0x20UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_HSICFGR_HSITRIM_6 (0x40UL << RCC_HSICFGR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CRRCR register *****************/ +/*!< HSI48CAL configuration */ +#define RCC_CRRCR_HSI48CAL_Pos (0U) +#define RCC_CRRCR_HSI48CAL_Msk (0x3FFUL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x000003FF */ +#define RCC_CRRCR_HSI48CAL RCC_CRRCR_HSI48CAL_Msk /*!< HSI48CAL[9:0] bits */ +#define RCC_CRRCR_HSI48CAL_0 (0x001UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000001 */ +#define RCC_CRRCR_HSI48CAL_1 (0x002UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000002 */ +#define RCC_CRRCR_HSI48CAL_2 (0x004UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000004 */ +#define RCC_CRRCR_HSI48CAL_3 (0x008UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000008 */ +#define RCC_CRRCR_HSI48CAL_4 (0x010UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000010 */ +#define RCC_CRRCR_HSI48CAL_5 (0x020UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000020 */ +#define RCC_CRRCR_HSI48CAL_6 (0x040UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000040 */ +#define RCC_CRRCR_HSI48CAL_7 (0x080UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000080 */ +#define RCC_CRRCR_HSI48CAL_8 (0x100UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000100 */ +#define RCC_CRRCR_HSI48CAL_9 (0x200UL << RCC_CRRCR_HSI48CAL_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_CSICFGR register ***************/ +/*!< CSICAL configuration */ +#define RCC_CSICFGR_CSICAL_Pos (0U) +#define RCC_CSICFGR_CSICAL_Msk (0xFFUL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x000000FF */ +#define RCC_CSICFGR_CSICAL RCC_CSICFGR_CSICAL_Msk /*!< CSICAL[7:0] bits */ +#define RCC_CSICFGR_CSICAL_0 (0x01UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000001 */ +#define RCC_CSICFGR_CSICAL_1 (0x02UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000002 */ +#define RCC_CSICFGR_CSICAL_2 (0x04UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000004 */ +#define RCC_CSICFGR_CSICAL_3 (0x08UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000008 */ +#define RCC_CSICFGR_CSICAL_4 (0x10UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000010 */ +#define RCC_CSICFGR_CSICAL_5 (0x20UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000020 */ +#define RCC_CSICFGR_CSICAL_6 (0x40UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000040 */ +#define RCC_CSICFGR_CSICAL_7 (0x80UL << RCC_CSICFGR_CSICAL_Pos) /*!< 0x00000080 */ + +/*!< CSITRIM configuration */ +#define RCC_CSICFGR_CSITRIM_Pos (24U) +#define RCC_CSICFGR_CSITRIM_Msk (0x3FUL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x3F000000 */ +#define RCC_CSICFGR_CSITRIM RCC_CSICFGR_CSITRIM_Msk /*!< CSITRIM[5:0] bits */ +#define RCC_CSICFGR_CSITRIM_0 (0x01UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_CSICFGR_CSITRIM_1 (0x02UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_CSICFGR_CSITRIM_2 (0x04UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_CSICFGR_CSITRIM_3 (0x08UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_CSICFGR_CSITRIM_4 (0x10UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_CSICFGR_CSITRIM_5 (0x20UL << RCC_CSICFGR_CSITRIM_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x7UL << RCC_CFGR_SW_Pos) /*!< 0x00000007 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[2:0] bits (System clock switch) */ +#define RCC_CFGR_SW_0 (0x1UL << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2UL << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ +#define RCC_CFGR_SW_2 (0x4UL << RCC_CFGR_SW_Pos) /*!< 0x00000004 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (3U) +#define RCC_CFGR_SWS_Msk (0x7UL << RCC_CFGR_SWS_Pos) /*!< 0x00000038 */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[2:0] bits (System clock switch status) */ +#define RCC_CFGR_SWS_0 (0x1UL << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ +#define RCC_CFGR_SWS_1 (0x2UL << RCC_CFGR_SWS_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_SWS_2 (0x4UL << RCC_CFGR_SWS_Pos) /*!< 0x00000020 */ + +#define RCC_CFGR_STOPWUCK_Pos (6U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ +#define RCC_CFGR_STOPKERWUCK_Pos (7U) +#define RCC_CFGR_STOPKERWUCK_Msk (0x1UL << RCC_CFGR_STOPKERWUCK_Pos) /*!< 0x00000080 */ +#define RCC_CFGR_STOPKERWUCK RCC_CFGR_STOPKERWUCK_Msk /*!< Kernel Clock Selection after a Wake Up from Stop */ + +/*!< RTCPRE configuration */ +#define RCC_CFGR_RTCPRE_Pos (8U) +#define RCC_CFGR_RTCPRE_Msk (0x3FUL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00003F00 */ +#define RCC_CFGR_RTCPRE RCC_CFGR_RTCPRE_Msk /*!< RTCPRE[5:0] bits (HSE division factor for RTC clock) */ +#define RCC_CFGR_RTCPRE_0 (0x01UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_RTCPRE_1 (0x02UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_RTCPRE_2 (0x04UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000400 */ +#define RCC_CFGR_RTCPRE_3 (0x08UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_RTCPRE_4 (0x10UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_RTCPRE_5 (0x20UL << RCC_CFGR_RTCPRE_Pos) /*!< 0x00002000 */ + +#define RCC_CFGR_TIMPRE_Pos (15U) +#define RCC_CFGR_TIMPRE_Msk (0x1UL << RCC_CFGR_TIMPRE_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_TIMPRE RCC_CFGR_TIMPRE_Msk /*!< TIMPRE configuration */ + +#define RCC_CFGR_MCO1PRE_Pos (18U) +#define RCC_CFGR_MCO1PRE_Msk (0xFUL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x003C0000 */ +#define RCC_CFGR_MCO1PRE RCC_CFGR_MCO1PRE_Msk /*!< MCO1 configuration */ +#define RCC_CFGR_MCO1PRE_0 (0x1UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_MCO1PRE_1 (0x2UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00080000 */ +#define RCC_CFGR_MCO1PRE_2 (0x4UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00100000 */ +#define RCC_CFGR_MCO1PRE_3 (0x8UL << RCC_CFGR_MCO1PRE_Pos) /*!< 0x00200000 */ + +#define RCC_CFGR_MCO1SEL_Pos (22U) +#define RCC_CFGR_MCO1SEL_Msk (0x7UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01C00000 */ +#define RCC_CFGR_MCO1SEL RCC_CFGR_MCO1SEL_Msk /*!< MCO1SEL [2:0] bits (MCO1 clock output selection) */ +#define RCC_CFGR_MCO1SEL_0 (0x1UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00400000 */ +#define RCC_CFGR_MCO1SEL_1 (0x2UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x00800000 */ +#define RCC_CFGR_MCO1SEL_2 (0x4UL << RCC_CFGR_MCO1SEL_Pos) /*!< 0x01000000 */ + +#define RCC_CFGR_MCO2PRE_Pos (25U) +#define RCC_CFGR_MCO2PRE_Msk (0xFUL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x1E000000 */ +#define RCC_CFGR_MCO2PRE RCC_CFGR_MCO2PRE_Msk /*!< MCO2 configuration */ +#define RCC_CFGR_MCO2PRE_0 (0x1UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCO2PRE_1 (0x2UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCO2PRE_2 (0x4UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x08000000 */ +#define RCC_CFGR_MCO2PRE_3 (0x8UL << RCC_CFGR_MCO2PRE_Pos) /*!< 0x10000000 */ + +#define RCC_CFGR_MCO2SEL_Pos (29U) +#define RCC_CFGR_MCO2SEL_Msk (0x7UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0xE0000000 */ +#define RCC_CFGR_MCO2SEL RCC_CFGR_MCO2SEL_Msk /*!< MCO2SEL [2:0] bits (MCO2 clock output selection) */ +#define RCC_CFGR_MCO2SEL_0 (0x1UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCO2SEL_1 (0x2UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x40000000 */ +#define RCC_CFGR_MCO2SEL_2 (0x4UL << RCC_CFGR_MCO2SEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CDCFGR register ****************/ +/*!< CPRE configuration */ +#define RCC_CDCFGR_CPRE_Pos (0U) +#define RCC_CDCFGR_CPRE_Msk (0xFUL << RCC_CDCFGR_CPRE_Pos) /*!< 0x0000000F */ +#define RCC_CDCFGR_CPRE RCC_CDCFGR_CPRE_Msk /*!< CPRE[3:0] bits */ +#define RCC_CDCFGR_CPRE_0 (0x1UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000001 */ +#define RCC_CDCFGR_CPRE_1 (0x2UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000002 */ +#define RCC_CDCFGR_CPRE_2 (0x4UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000004 */ +#define RCC_CDCFGR_CPRE_3 (0x8UL << RCC_CDCFGR_CPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_BMCFGR register ****************/ +/*!< BMPRE configuration */ +#define RCC_BMCFGR_BMPRE_Pos (0U) +#define RCC_BMCFGR_BMPRE_Msk (0xFUL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x0000000F */ +#define RCC_BMCFGR_BMPRE RCC_BMCFGR_BMPRE_Msk /*!< BMPRE[3:0] bits */ +#define RCC_BMCFGR_BMPRE_0 (0x1UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000001 */ +#define RCC_BMCFGR_BMPRE_1 (0x2UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000002 */ +#define RCC_BMCFGR_BMPRE_2 (0x4UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000004 */ +#define RCC_BMCFGR_BMPRE_3 (0x8UL << RCC_BMCFGR_BMPRE_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for RCC_APBCFGR register ***************/ +/*!< APB1 prescaler configuration */ +#define RCC_APBCFGR_PPRE1_Pos (0U) +#define RCC_APBCFGR_PPRE1_Msk (0x7UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000007 */ +#define RCC_APBCFGR_PPRE1 RCC_APBCFGR_PPRE1_Msk /*!< PPRE1[2:0] bits */ +#define RCC_APBCFGR_PPRE1_0 (0x1UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000001 */ +#define RCC_APBCFGR_PPRE1_1 (0x2UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000002 */ +#define RCC_APBCFGR_PPRE1_2 (0x4UL << RCC_APBCFGR_PPRE1_Pos) /*!< 0x00000004 */ + +/*!< APB2 prescaler configuration */ +#define RCC_APBCFGR_PPRE2_Pos (4U) +#define RCC_APBCFGR_PPRE2_Msk (0x7UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000070 */ +#define RCC_APBCFGR_PPRE2 RCC_APBCFGR_PPRE2_Msk /*!< PPRE2[2:0] bits */ +#define RCC_APBCFGR_PPRE2_0 (0x1UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000010 */ +#define RCC_APBCFGR_PPRE2_1 (0x2UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000020 */ +#define RCC_APBCFGR_PPRE2_2 (0x4UL << RCC_APBCFGR_PPRE2_Pos) /*!< 0x00000040 */ + +/*!< APB4 prescaler configuration */ +#define RCC_APBCFGR_PPRE4_Pos (8U) +#define RCC_APBCFGR_PPRE4_Msk (0x7UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000700 */ +#define RCC_APBCFGR_PPRE4 RCC_APBCFGR_PPRE4_Msk /*!< PPRE4[2:0] bits */ +#define RCC_APBCFGR_PPRE4_0 (0x1UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000100 */ +#define RCC_APBCFGR_PPRE4_1 (0x2UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000200 */ +#define RCC_APBCFGR_PPRE4_2 (0x4UL << RCC_APBCFGR_PPRE4_Pos) /*!< 0x00000400 */ + +/*!< APB5 prescaler configuration */ +#define RCC_APBCFGR_PPRE5_Pos (12U) +#define RCC_APBCFGR_PPRE5_Msk (0x7UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00007000 */ +#define RCC_APBCFGR_PPRE5 RCC_APBCFGR_PPRE5_Msk /*!< PPRE5[2:0] bits */ +#define RCC_APBCFGR_PPRE5_0 (0x1UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00001000 */ +#define RCC_APBCFGR_PPRE5_1 (0x2UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00002000 */ +#define RCC_APBCFGR_PPRE5_2 (0x4UL << RCC_APBCFGR_PPRE5_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_PLLCKSELR register *************/ +#define RCC_PLLCKSELR_PLLSRC_Pos (0U) +#define RCC_PLLCKSELR_PLLSRC_Msk (0x3UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCKSELR_PLLSRC RCC_PLLCKSELR_PLLSRC_Msk /*!< DIVMx and PLLs clock source selection */ +#define RCC_PLLCKSELR_PLLSRC_0 (0x01UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_PLLSRC_1 (0x02UL << RCC_PLLCKSELR_PLLSRC_Pos) /*!< 0x00000020 */ + +#define RCC_PLLCKSELR_DIVM1_Pos (4U) +#define RCC_PLLCKSELR_DIVM1_Msk (0x3FUL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x000003F0 */ +#define RCC_PLLCKSELR_DIVM1 RCC_PLLCKSELR_DIVM1_Msk /*!< DIVM1[5:0] bits */ +#define RCC_PLLCKSELR_DIVM1_0 (0x01UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000010 */ +#define RCC_PLLCKSELR_DIVM1_1 (0x02UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000020 */ +#define RCC_PLLCKSELR_DIVM1_2 (0x04UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000040 */ +#define RCC_PLLCKSELR_DIVM1_3 (0x08UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000080 */ +#define RCC_PLLCKSELR_DIVM1_4 (0x10UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000100 */ +#define RCC_PLLCKSELR_DIVM1_5 (0x20UL << RCC_PLLCKSELR_DIVM1_Pos) /*!< 0x00000200 */ + +#define RCC_PLLCKSELR_DIVM2_Pos (12U) +#define RCC_PLLCKSELR_DIVM2_Msk (0x3FUL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x0003F000 */ +#define RCC_PLLCKSELR_DIVM2 RCC_PLLCKSELR_DIVM2_Msk /*!< DIVM2[5:0] bits */ +#define RCC_PLLCKSELR_DIVM2_0 (0x01UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00001000 */ +#define RCC_PLLCKSELR_DIVM2_1 (0x02UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00002000 */ +#define RCC_PLLCKSELR_DIVM2_2 (0x04UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00004000 */ +#define RCC_PLLCKSELR_DIVM2_3 (0x08UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00008000 */ +#define RCC_PLLCKSELR_DIVM2_4 (0x10UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00010000 */ +#define RCC_PLLCKSELR_DIVM2_5 (0x20UL << RCC_PLLCKSELR_DIVM2_Pos) /*!< 0x00020000 */ + +#define RCC_PLLCKSELR_DIVM3_Pos (20U) +#define RCC_PLLCKSELR_DIVM3_Msk (0x3FUL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x03F00000 */ +#define RCC_PLLCKSELR_DIVM3 RCC_PLLCKSELR_DIVM3_Msk /*!< DIVM3[5:0] bits */ +#define RCC_PLLCKSELR_DIVM3_0 (0x01UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00100000 */ +#define RCC_PLLCKSELR_DIVM3_1 (0x02UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00200000 */ +#define RCC_PLLCKSELR_DIVM3_2 (0x04UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00400000 */ +#define RCC_PLLCKSELR_DIVM3_3 (0x08UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x00800000 */ +#define RCC_PLLCKSELR_DIVM3_4 (0x10UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x01000000 */ +#define RCC_PLLCKSELR_DIVM3_5 (0x20UL << RCC_PLLCKSELR_DIVM3_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLL1FRACEN_Pos (0U) +#define RCC_PLLCFGR_PLL1FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL1FRACEN_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLL1FRACEN RCC_PLLCFGR_PLL1FRACEN_Msk /*!< PLL1 fractional latch enable */ +#define RCC_PLLCFGR_PLL1VCOSEL_Pos (1U) +#define RCC_PLLCFGR_PLL1VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL1VCOSEL_Pos) /*!< 0x00000002 */ +#define RCC_PLLCFGR_PLL1VCOSEL RCC_PLLCFGR_PLL1VCOSEL_Msk /*!< PLL1 VCO selection */ +#define RCC_PLLCFGR_PLL1SSCGEN_Pos (2U) +#define RCC_PLLCFGR_PLL1SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SSCGEN_Pos) /*!< 0x00000004 */ +#define RCC_PLLCFGR_PLL1SSCGEN RCC_PLLCFGR_PLL1SSCGEN_Msk /*!< PLL1 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL1RGE_Pos (3U) +#define RCC_PLLCFGR_PLL1RGE_Msk (0x3UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000018 */ +#define RCC_PLLCFGR_PLL1RGE RCC_PLLCFGR_PLL1RGE_Msk /*!< PLL1RGE[1:0] bits: PLL1 input frequency range */ +#define RCC_PLLCFGR_PLL1RGE_0 (0x1UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000008 */ +#define RCC_PLLCFGR_PLL1RGE_1 (0x2UL << RCC_PLLCFGR_PLL1RGE_Pos) /*!< 0x00000010 */ + +#define RCC_PLLCFGR_PLL1PEN_Pos (5U) +#define RCC_PLLCFGR_PLL1PEN_Msk (0x1UL << RCC_PLLCFGR_PLL1PEN_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLL1PEN RCC_PLLCFGR_PLL1PEN_Msk /*!< PLL1 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL1QEN_Pos (6U) +#define RCC_PLLCFGR_PLL1QEN_Msk (0x1UL << RCC_PLLCFGR_PLL1QEN_Pos) /*!< 0x00000040 */ +#define RCC_PLLCFGR_PLL1QEN RCC_PLLCFGR_PLL1QEN_Msk /*!< PLL1 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL1REN_Pos (7U) +#define RCC_PLLCFGR_PLL1REN_Msk (0x1UL << RCC_PLLCFGR_PLL1REN_Pos) /*!< 0x00000080 */ +#define RCC_PLLCFGR_PLL1REN RCC_PLLCFGR_PLL1REN_Msk /*!< PLL1 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL1SEN_Pos (8U) +#define RCC_PLLCFGR_PLL1SEN_Msk (0x1UL << RCC_PLLCFGR_PLL1SEN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLL1SEN RCC_PLLCFGR_PLL1SEN_Msk /*!< PLL1 DIVS divider output enable */ + +#define RCC_PLLCFGR_PLL2FRACEN_Pos (11U) +#define RCC_PLLCFGR_PLL2FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL2FRACEN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLL2FRACEN RCC_PLLCFGR_PLL2FRACEN_Msk /*!< PLL2 fractional latch enable */ +#define RCC_PLLCFGR_PLL2VCOSEL_Pos (12U) +#define RCC_PLLCFGR_PLL2VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL2VCOSEL_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLL2VCOSEL RCC_PLLCFGR_PLL2VCOSEL_Msk /*!< PLL2 VCO selection */ +#define RCC_PLLCFGR_PLL2SSCGEN_Pos (13U) +#define RCC_PLLCFGR_PLL2SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SSCGEN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLL2SSCGEN RCC_PLLCFGR_PLL2SSCGEN_Msk /*!< PLL2 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL2RGE_Pos (14U) +#define RCC_PLLCFGR_PLL2RGE_Msk (0x3UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x0000C000 */ +#define RCC_PLLCFGR_PLL2RGE RCC_PLLCFGR_PLL2RGE_Msk /*!< PLL2RGE[1:0] bits: PLL2 input frequency range */ +#define RCC_PLLCFGR_PLL2RGE_0 (0x1UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00004000 */ +#define RCC_PLLCFGR_PLL2RGE_1 (0x2UL << RCC_PLLCFGR_PLL2RGE_Pos) /*!< 0x00008000 */ + +#define RCC_PLLCFGR_PLL2PEN_Pos (16U) +#define RCC_PLLCFGR_PLL2PEN_Msk (0x1UL << RCC_PLLCFGR_PLL2PEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLL2PEN RCC_PLLCFGR_PLL2PEN_Msk /*!< PLL2 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL2QEN_Pos (17U) +#define RCC_PLLCFGR_PLL2QEN_Msk (0x1UL << RCC_PLLCFGR_PLL2QEN_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLL2QEN RCC_PLLCFGR_PLL2QEN_Msk /*!< PLL2 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL2REN_Pos (18U) +#define RCC_PLLCFGR_PLL2REN_Msk (0x1UL << RCC_PLLCFGR_PLL2REN_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLL2REN RCC_PLLCFGR_PLL2REN_Msk /*!< PLL2 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL2SEN_Pos (19U) +#define RCC_PLLCFGR_PLL2SEN_Msk (0x1UL << RCC_PLLCFGR_PLL2SEN_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLL2SEN RCC_PLLCFGR_PLL2SEN_Msk /*!< PLL2 DIVS divider output enable */ +#define RCC_PLLCFGR_PLL2TEN_Pos (20U) +#define RCC_PLLCFGR_PLL2TEN_Msk (0x1UL << RCC_PLLCFGR_PLL2TEN_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLL2TEN RCC_PLLCFGR_PLL2TEN_Msk /*!< PLL2 DIVT divider output enable */ + +#define RCC_PLLCFGR_PLL3FRACEN_Pos (22U) +#define RCC_PLLCFGR_PLL3FRACEN_Msk (0x1UL << RCC_PLLCFGR_PLL3FRACEN_Pos) /*!< 0x00400000 */ +#define RCC_PLLCFGR_PLL3FRACEN RCC_PLLCFGR_PLL3FRACEN_Msk /*!< PLL3 fractional latch enable */ +#define RCC_PLLCFGR_PLL3VCOSEL_Pos (23U) +#define RCC_PLLCFGR_PLL3VCOSEL_Msk (0x1UL << RCC_PLLCFGR_PLL3VCOSEL_Pos) /*!< 0x00800000 */ +#define RCC_PLLCFGR_PLL3VCOSEL RCC_PLLCFGR_PLL3VCOSEL_Msk /*!< PLL3 VCO selection */ +#define RCC_PLLCFGR_PLL3SSCGEN_Pos (24U) +#define RCC_PLLCFGR_PLL3SSCGEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SSCGEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLL3SSCGEN RCC_PLLCFGR_PLL3SSCGEN_Msk /*!< PLL3 Spread Spectrum Clock Generator enable */ +#define RCC_PLLCFGR_PLL3RGE_Pos (25U) +#define RCC_PLLCFGR_PLL3RGE_Msk (0x3UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x06000000 */ +#define RCC_PLLCFGR_PLL3RGE RCC_PLLCFGR_PLL3RGE_Msk /*!< PLL3RGE[1:0] bits: PLL3 input frequency range */ +#define RCC_PLLCFGR_PLL3RGE_0 (0x1UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLL3RGE_1 (0x2UL << RCC_PLLCFGR_PLL3RGE_Pos) /*!< 0x04000000 */ + +#define RCC_PLLCFGR_PLL3PEN_Pos (27U) +#define RCC_PLLCFGR_PLL3PEN_Msk (0x1UL << RCC_PLLCFGR_PLL3PEN_Pos) /*!< 0x08000000 */ +#define RCC_PLLCFGR_PLL3PEN RCC_PLLCFGR_PLL3PEN_Msk /*!< PLL3 DIVP divider output enable */ +#define RCC_PLLCFGR_PLL3QEN_Pos (28U) +#define RCC_PLLCFGR_PLL3QEN_Msk (0x1UL << RCC_PLLCFGR_PLL3QEN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLL3QEN RCC_PLLCFGR_PLL3QEN_Msk /*!< PLL3 DIVQ divider output enable */ +#define RCC_PLLCFGR_PLL3REN_Pos (29U) +#define RCC_PLLCFGR_PLL3REN_Msk (0x1UL << RCC_PLLCFGR_PLL3REN_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLL3REN RCC_PLLCFGR_PLL3REN_Msk /*!< PLL3 DIVR divider output enable */ +#define RCC_PLLCFGR_PLL3SEN_Pos (30U) +#define RCC_PLLCFGR_PLL3SEN_Msk (0x1UL << RCC_PLLCFGR_PLL3SEN_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLL3SEN RCC_PLLCFGR_PLL3SEN_Msk /*!< PLL3 DIVS divider output enable */ + +/******************** Bit definition for RCC_PLL1DIVR1 register *************/ +#define RCC_PLL1DIVR1_DIVN_Pos (0U) +#define RCC_PLL1DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL1DIVR1_DIVN RCC_PLL1DIVR1_DIVN_Msk /*!< DIVN1[8:0] bits: PLL1 DIVN division factor */ +#define RCC_PLL1DIVR1_DIVN_0 (0x001UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR1_DIVN_1 (0x002UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR1_DIVN_2 (0x004UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL1DIVR1_DIVN_3 (0x008UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL1DIVR1_DIVN_4 (0x010UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL1DIVR1_DIVN_5 (0x020UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL1DIVR1_DIVN_6 (0x040UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL1DIVR1_DIVN_7 (0x080UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL1DIVR1_DIVN_8 (0x100UL << RCC_PLL1DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL1DIVR1_DIVP_Pos (9U) +#define RCC_PLL1DIVR1_DIVP_Msk (0x7FUL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL1DIVR1_DIVP RCC_PLL1DIVR1_DIVP_Msk /*!< DIVP1[6:0] bits: PLL1 DIVP division factor */ +#define RCC_PLL1DIVR1_DIVP_0 (0x001UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL1DIVR1_DIVP_1 (0x002UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL1DIVR1_DIVP_2 (0x004UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL1DIVR1_DIVP_3 (0x008UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL1DIVR1_DIVP_4 (0x010UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL1DIVR1_DIVP_5 (0x020UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL1DIVR1_DIVP_6 (0x040UL << RCC_PLL1DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL1DIVR1_DIVQ_Pos (16U) +#define RCC_PLL1DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL1DIVR1_DIVQ RCC_PLL1DIVR1_DIVQ_Msk /*!< DIVQ1[6:0] bits: PLL1 DIVQ division factor */ +#define RCC_PLL1DIVR1_DIVQ_0 (0x001UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL1DIVR1_DIVQ_1 (0x002UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL1DIVR1_DIVQ_2 (0x004UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL1DIVR1_DIVQ_3 (0x008UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL1DIVR1_DIVQ_4 (0x010UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL1DIVR1_DIVQ_5 (0x020UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL1DIVR1_DIVQ_6 (0x040UL << RCC_PLL1DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL1DIVR1_DIVR_Pos (24U) +#define RCC_PLL1DIVR1_DIVR_Msk (0x7FUL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL1DIVR1_DIVR RCC_PLL1DIVR1_DIVR_Msk /*!< DIVR1[6:0] bits: PLL1 DIVR division factor */ +#define RCC_PLL1DIVR1_DIVR_0 (0x001UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL1DIVR1_DIVR_1 (0x002UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL1DIVR1_DIVR_2 (0x004UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL1DIVR1_DIVR_3 (0x008UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL1DIVR1_DIVR_4 (0x010UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL1DIVR1_DIVR_5 (0x020UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL1DIVR1_DIVR_6 (0x040UL << RCC_PLL1DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL1FRACR register *************/ +#define RCC_PLL1FRACR_FRACN_Pos (3U) +#define RCC_PLL1FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL1FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL1FRACR_FRACN RCC_PLL1FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL2DIVR1 register *************/ +#define RCC_PLL2DIVR1_DIVN_Pos (0U) +#define RCC_PLL2DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL2DIVR1_DIVN RCC_PLL2DIVR1_DIVN_Msk /*!< DIVN2[8:0] bits: PLL2 DIVN division factor */ +#define RCC_PLL2DIVR1_DIVN_0 (0x001UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR1_DIVN_1 (0x002UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR1_DIVN_2 (0x004UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL2DIVR1_DIVN_3 (0x008UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL2DIVR1_DIVN_4 (0x010UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL2DIVR1_DIVN_5 (0x020UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL2DIVR1_DIVN_6 (0x040UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL2DIVR1_DIVN_7 (0x080UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL2DIVR1_DIVN_8 (0x100UL << RCC_PLL2DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL2DIVR1_DIVP_Pos (9U) +#define RCC_PLL2DIVR1_DIVP_Msk (0x7FUL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL2DIVR1_DIVP RCC_PLL2DIVR1_DIVP_Msk /*!< DIVP2[6:0] bits: PLL2 DIVP division factor */ +#define RCC_PLL2DIVR1_DIVP_0 (0x001UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR1_DIVP_1 (0x002UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL2DIVR1_DIVP_2 (0x004UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL2DIVR1_DIVP_3 (0x008UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL2DIVR1_DIVP_4 (0x010UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL2DIVR1_DIVP_5 (0x020UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL2DIVR1_DIVP_6 (0x040UL << RCC_PLL2DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL2DIVR1_DIVQ_Pos (16U) +#define RCC_PLL2DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL2DIVR1_DIVQ RCC_PLL2DIVR1_DIVQ_Msk /*!< DIVQ2[6:0] bits: PLL2 DIVQ division factor */ +#define RCC_PLL2DIVR1_DIVQ_0 (0x001UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL2DIVR1_DIVQ_1 (0x002UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL2DIVR1_DIVQ_2 (0x004UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL2DIVR1_DIVQ_3 (0x008UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL2DIVR1_DIVQ_4 (0x010UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL2DIVR1_DIVQ_5 (0x020UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL2DIVR1_DIVQ_6 (0x040UL << RCC_PLL2DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL2DIVR1_DIVR_Pos (24U) +#define RCC_PLL2DIVR1_DIVR_Msk (0x7FUL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL2DIVR1_DIVR RCC_PLL2DIVR1_DIVR_Msk /*!< DIVR2[6:0] bits: PLL2 DIVR division factor */ +#define RCC_PLL2DIVR1_DIVR_0 (0x001UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL2DIVR1_DIVR_1 (0x002UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL2DIVR1_DIVR_2 (0x004UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL2DIVR1_DIVR_3 (0x008UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL2DIVR1_DIVR_4 (0x010UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL2DIVR1_DIVR_5 (0x020UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL2DIVR1_DIVR_6 (0x040UL << RCC_PLL2DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2FRACR register *************/ +#define RCC_PLL2FRACR_FRACN_Pos (3U) +#define RCC_PLL2FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL2FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL2FRACR_FRACN RCC_PLL2FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_PLL3DIVR1 register *************/ +#define RCC_PLL3DIVR1_DIVN_Pos (0U) +#define RCC_PLL3DIVR1_DIVN_Msk (0x1FFUL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x000001FF */ +#define RCC_PLL3DIVR1_DIVN RCC_PLL3DIVR1_DIVN_Msk /*!< DIVN3[8:0] bits: PLL3 DIVN division factor */ +#define RCC_PLL3DIVR1_DIVN_0 (0x001UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR1_DIVN_1 (0x002UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR1_DIVN_2 (0x004UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000004 */ +#define RCC_PLL3DIVR1_DIVN_3 (0x008UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000008 */ +#define RCC_PLL3DIVR1_DIVN_4 (0x010UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000010 */ +#define RCC_PLL3DIVR1_DIVN_5 (0x020UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000020 */ +#define RCC_PLL3DIVR1_DIVN_6 (0x040UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000040 */ +#define RCC_PLL3DIVR1_DIVN_7 (0x080UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000080 */ +#define RCC_PLL3DIVR1_DIVN_8 (0x100UL << RCC_PLL3DIVR1_DIVN_Pos) /*!< 0x00000100 */ + +#define RCC_PLL3DIVR1_DIVP_Pos (9U) +#define RCC_PLL3DIVR1_DIVP_Msk (0x7FUL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x0000FE00 */ +#define RCC_PLL3DIVR1_DIVP RCC_PLL3DIVR1_DIVP_Msk /*!< DIVP3[6:0] bits: PLL3 DIVP division factor */ +#define RCC_PLL3DIVR1_DIVP_0 (0x001UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000200 */ +#define RCC_PLL3DIVR1_DIVP_1 (0x002UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000400 */ +#define RCC_PLL3DIVR1_DIVP_2 (0x004UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00000800 */ +#define RCC_PLL3DIVR1_DIVP_3 (0x008UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00001000 */ +#define RCC_PLL3DIVR1_DIVP_4 (0x010UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00002000 */ +#define RCC_PLL3DIVR1_DIVP_5 (0x020UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00004000 */ +#define RCC_PLL3DIVR1_DIVP_6 (0x040UL << RCC_PLL3DIVR1_DIVP_Pos) /*!< 0x00008000 */ + +#define RCC_PLL3DIVR1_DIVQ_Pos (16U) +#define RCC_PLL3DIVR1_DIVQ_Msk (0x7FUL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x007F0000 */ +#define RCC_PLL3DIVR1_DIVQ RCC_PLL3DIVR1_DIVQ_Msk /*!< DIVQ3[6:0] bits: PLL3 DIVQ division factor */ +#define RCC_PLL3DIVR1_DIVQ_0 (0x001UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00010000 */ +#define RCC_PLL3DIVR1_DIVQ_1 (0x002UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00020000 */ +#define RCC_PLL3DIVR1_DIVQ_2 (0x004UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00040000 */ +#define RCC_PLL3DIVR1_DIVQ_3 (0x008UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00080000 */ +#define RCC_PLL3DIVR1_DIVQ_4 (0x010UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00100000 */ +#define RCC_PLL3DIVR1_DIVQ_5 (0x020UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00200000 */ +#define RCC_PLL3DIVR1_DIVQ_6 (0x040UL << RCC_PLL3DIVR1_DIVQ_Pos) /*!< 0x00400000 */ + +#define RCC_PLL3DIVR1_DIVR_Pos (24U) +#define RCC_PLL3DIVR1_DIVR_Msk (0x7FUL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x7F000000 */ +#define RCC_PLL3DIVR1_DIVR RCC_PLL3DIVR1_DIVR_Msk /*!< DIVR3[6:0] bits: PLL3 DIVR division factor */ +#define RCC_PLL3DIVR1_DIVR_0 (0x001UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x01000000 */ +#define RCC_PLL3DIVR1_DIVR_1 (0x002UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x02000000 */ +#define RCC_PLL3DIVR1_DIVR_2 (0x004UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x04000000 */ +#define RCC_PLL3DIVR1_DIVR_3 (0x008UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x08000000 */ +#define RCC_PLL3DIVR1_DIVR_4 (0x010UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x10000000 */ +#define RCC_PLL3DIVR1_DIVR_5 (0x020UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x20000000 */ +#define RCC_PLL3DIVR1_DIVR_6 (0x040UL << RCC_PLL3DIVR1_DIVR_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3FRACR register *************/ +#define RCC_PLL3FRACR_FRACN_Pos (3U) +#define RCC_PLL3FRACR_FRACN_Msk (0x1FFFUL << RCC_PLL3FRACR_FRACN_Pos) /*!< 0x0000FFF8 */ +#define RCC_PLL3FRACR_FRACN RCC_PLL3FRACR_FRACN_Msk /*!< FRACN[12:0] bits */ + +/******************** Bit definition for RCC_CCIPR1 register **************/ +#define RCC_CCIPR1_FMCSEL_Pos (0U) +#define RCC_CCIPR1_FMCSEL_Msk (0x3UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR1_FMCSEL RCC_CCIPR1_FMCSEL_Msk +#define RCC_CCIPR1_FMCSEL_0 (0x1UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR1_FMCSEL_1 (0x2UL << RCC_CCIPR1_FMCSEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR1_SDMMC12SEL_Pos (2U) +#define RCC_CCIPR1_SDMMC12SEL_Msk (0x1UL << RCC_CCIPR1_SDMMC12SEL_Pos) /*!< 0x00000004 */ +#define RCC_CCIPR1_SDMMC12SEL RCC_CCIPR1_SDMMC12SEL_Msk + +#define RCC_CCIPR1_XSPI1SEL_Pos (4U) +#define RCC_CCIPR1_XSPI1SEL_Msk (0x3UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000030 */ +#define RCC_CCIPR1_XSPI1SEL RCC_CCIPR1_XSPI1SEL_Msk +#define RCC_CCIPR1_XSPI1SEL_0 (0x1UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR1_XSPI1SEL_1 (0x2UL << RCC_CCIPR1_XSPI1SEL_Pos) /*!< 0x00000020 */ + +#define RCC_CCIPR1_XSPI2SEL_Pos (6U) +#define RCC_CCIPR1_XSPI2SEL_Msk (0x3UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x000000C0 */ +#define RCC_CCIPR1_XSPI2SEL RCC_CCIPR1_XSPI2SEL_Msk +#define RCC_CCIPR1_XSPI2SEL_0 (0x1UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000040 */ +#define RCC_CCIPR1_XSPI2SEL_1 (0x2UL << RCC_CCIPR1_XSPI2SEL_Pos) /*!< 0x00000080 */ + +#define RCC_CCIPR1_USBREFCKSEL_Pos (8U) +#define RCC_CCIPR1_USBREFCKSEL_Msk (0xFUL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000F00 */ +#define RCC_CCIPR1_USBREFCKSEL RCC_CCIPR1_USBREFCKSEL_Msk +#define RCC_CCIPR1_USBREFCKSEL_0 (0x1UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR1_USBREFCKSEL_1 (0x2UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR1_USBREFCKSEL_2 (0x4UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000400 */ +#define RCC_CCIPR1_USBREFCKSEL_3 (0x8UL << RCC_CCIPR1_USBREFCKSEL_Pos) /*!< 0x00000800 */ + +#define RCC_CCIPR1_USBPHYCSEL_Pos (12U) +#define RCC_CCIPR1_USBPHYCSEL_Msk (0x3UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR1_USBPHYCSEL RCC_CCIPR1_USBPHYCSEL_Msk +#define RCC_CCIPR1_USBPHYCSEL_0 (0x1UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR1_USBPHYCSEL_1 (0x2UL << RCC_CCIPR1_USBPHYCSEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR1_OTGFSSEL_Pos (14U) +#define RCC_CCIPR1_OTGFSSEL_Msk (0x3UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CCIPR1_OTGFSSEL RCC_CCIPR1_OTGFSSEL_Msk +#define RCC_CCIPR1_OTGFSSEL_0 (0x1UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00004000 */ +#define RCC_CCIPR1_OTGFSSEL_1 (0x2UL << RCC_CCIPR1_OTGFSSEL_Pos) /*!< 0x00008000 */ + +#define RCC_CCIPR1_ETH1REFCKSEL_Pos (16U) +#define RCC_CCIPR1_ETH1REFCKSEL_Msk (0x3UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00030000 */ +#define RCC_CCIPR1_ETH1REFCKSEL RCC_CCIPR1_ETH1REFCKSEL_Msk +#define RCC_CCIPR1_ETH1REFCKSEL_0 (0x1UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR1_ETH1REFCKSEL_1 (0x2UL << RCC_CCIPR1_ETH1REFCKSEL_Pos) /*!< 0x00020000 */ + +#define RCC_CCIPR1_ETH1PHYCKSEL_Pos (18U) +#define RCC_CCIPR1_ETH1PHYCKSEL_Msk (0x1UL << RCC_CCIPR1_ETH1PHYCKSEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR1_ETH1PHYCKSEL RCC_CCIPR1_ETH1PHYCKSEL_Msk + +#define RCC_CCIPR1_ADF1SEL_Pos (20U) +#define RCC_CCIPR1_ADF1SEL_Msk (0x7UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR1_ADF1SEL RCC_CCIPR1_ADF1SEL_Msk +#define RCC_CCIPR1_ADF1SEL_0 (0x1UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR1_ADF1SEL_1 (0x2UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR1_ADF1SEL_2 (0x4UL << RCC_CCIPR1_ADF1SEL_Pos) /*!< 0x00400000 */ + +#define RCC_CCIPR1_ADCSEL_Pos (24U) +#define RCC_CCIPR1_ADCSEL_Msk (0x3UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR1_ADCSEL RCC_CCIPR1_ADCSEL_Msk +#define RCC_CCIPR1_ADCSEL_0 (0x1UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR1_ADCSEL_1 (0x2UL << RCC_CCIPR1_ADCSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR1_PSSISEL_Pos (27U) +#define RCC_CCIPR1_PSSISEL_Msk (0x1UL << RCC_CCIPR1_PSSISEL_Pos) /*!< 0x08000000 */ +#define RCC_CCIPR1_PSSISEL RCC_CCIPR1_PSSISEL_Msk + +#define RCC_CCIPR1_CKPERSEL_Pos (28U) +#define RCC_CCIPR1_CKPERSEL_Msk (0x3UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR1_CKPERSEL RCC_CCIPR1_CKPERSEL_Msk +#define RCC_CCIPR1_CKPERSEL_0 (0x1UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR1_CKPERSEL_1 (0x2UL << RCC_CCIPR1_CKPERSEL_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for RCC_CCIPR2 register *************/ +#define RCC_CCIPR2_UART234578SEL_Pos (0U) +#define RCC_CCIPR2_UART234578SEL_Msk (0x7UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR2_UART234578SEL RCC_CCIPR2_UART234578SEL_Msk +#define RCC_CCIPR2_UART234578SEL_0 (0x1UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR2_UART234578SEL_1 (0x2UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR2_UART234578SEL_2 (0x4UL << RCC_CCIPR2_UART234578SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR2_SPI23SEL_Pos (4U) +#define RCC_CCIPR2_SPI23SEL_Msk (0x7UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR2_SPI23SEL RCC_CCIPR2_SPI23SEL_Msk +#define RCC_CCIPR2_SPI23SEL_0 (0x1UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR2_SPI23SEL_1 (0x2UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR2_SPI23SEL_2 (0x4UL << RCC_CCIPR2_SPI23SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR2_I2C23SEL_Pos (8U) +#define RCC_CCIPR2_I2C23SEL_Msk (0x3UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000300 */ +#define RCC_CCIPR2_I2C23SEL RCC_CCIPR2_I2C23SEL_Msk +#define RCC_CCIPR2_I2C23SEL_0 (0x1UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR2_I2C23SEL_1 (0x2UL << RCC_CCIPR2_I2C23SEL_Pos) /*!< 0x00000200 */ + +#define RCC_CCIPR2_I2C1_I3C1SEL_Pos (12U) +#define RCC_CCIPR2_I2C1_I3C1SEL_Msk (0x3UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL RCC_CCIPR2_I2C1_I3C1SEL_Msk +#define RCC_CCIPR2_I2C1_I3C1SEL_0 (0x1UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR2_I2C1_I3C1SEL_1 (0x2UL << RCC_CCIPR2_I2C1_I3C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR2_LPTIM1SEL_Pos (16U) +#define RCC_CCIPR2_LPTIM1SEL_Msk (0x7UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR2_LPTIM1SEL RCC_CCIPR2_LPTIM1SEL_Msk +#define RCC_CCIPR2_LPTIM1SEL_0 (0x1UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR2_LPTIM1SEL_1 (0x2UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR2_LPTIM1SEL_2 (0x4UL << RCC_CCIPR2_LPTIM1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR2_FDCANSEL_Pos (22U) +#define RCC_CCIPR2_FDCANSEL_Msk (0x3UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00C00000 */ +#define RCC_CCIPR2_FDCANSEL RCC_CCIPR2_FDCANSEL_Msk +#define RCC_CCIPR2_FDCANSEL_0 (0x1UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00400000 */ +#define RCC_CCIPR2_FDCANSEL_1 (0x2UL << RCC_CCIPR2_FDCANSEL_Pos) /*!< 0x00800000 */ + +#define RCC_CCIPR2_SPDIFRXSEL_Pos (24U) +#define RCC_CCIPR2_SPDIFRXSEL_Msk (0x3UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_SPDIFRXSEL RCC_CCIPR2_SPDIFRXSEL_Msk +#define RCC_CCIPR2_SPDIFRXSEL_0 (0x1UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_SPDIFRXSEL_1 (0x2UL << RCC_CCIPR2_SPDIFRXSEL_Pos) /*!< 0x02000000 */ + +#define RCC_CCIPR2_CECSEL_Pos (28U) +#define RCC_CCIPR2_CECSEL_Msk (0x3UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x03000000 */ +#define RCC_CCIPR2_CECSEL RCC_CCIPR2_CECSEL_Msk +#define RCC_CCIPR2_CECSEL_0 (0x1UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x01000000 */ +#define RCC_CCIPR2_CECSEL_1 (0x2UL << RCC_CCIPR2_CECSEL_Pos) /*!< 0x02000000 */ + +/******************** Bit definition for RCC_CCIPR3 register *************/ +#define RCC_CCIPR3_USART1SEL_Pos (0U) +#define RCC_CCIPR3_USART1SEL_Msk (0x7UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR3_USART1SEL RCC_CCIPR3_USART1SEL_Msk +#define RCC_CCIPR3_USART1SEL_0 (0x1UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR3_USART1SEL_1 (0x2UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR3_USART1SEL_2 (0x4UL << RCC_CCIPR3_USART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR3_SPI45SEL_Pos (4U) +#define RCC_CCIPR3_SPI45SEL_Msk (0x7UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR3_SPI45SEL RCC_CCIPR3_SPI45SEL_Msk +#define RCC_CCIPR3_SPI45SEL_0 (0x1UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR3_SPI45SEL_1 (0x2UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR3_SPI45SEL_2 (0x4UL << RCC_CCIPR3_SPI45SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR3_SPI1SEL_Pos (8U) +#define RCC_CCIPR3_SPI1SEL_Msk (0x7UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR3_SPI1SEL RCC_CCIPR3_SPI1SEL_Msk +#define RCC_CCIPR3_SPI1SEL_0 (0x1UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR3_SPI1SEL_1 (0x2UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR3_SPI1SEL_2 (0x4UL << RCC_CCIPR3_SPI1SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR3_SAI1SEL_Pos (16U) +#define RCC_CCIPR3_SAI1SEL_Msk (0x7UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00070000 */ +#define RCC_CCIPR3_SAI1SEL RCC_CCIPR3_SAI1SEL_Msk +#define RCC_CCIPR3_SAI1SEL_0 (0x1UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00010000 */ +#define RCC_CCIPR3_SAI1SEL_1 (0x2UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00020000 */ +#define RCC_CCIPR3_SAI1SEL_2 (0x4UL << RCC_CCIPR3_SAI1SEL_Pos) /*!< 0x00040000 */ + +#define RCC_CCIPR3_SAI2SEL_Pos (20U) +#define RCC_CCIPR3_SAI2SEL_Msk (0x7UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00700000 */ +#define RCC_CCIPR3_SAI2SEL RCC_CCIPR3_SAI2SEL_Msk +#define RCC_CCIPR3_SAI2SEL_0 (0x1UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR3_SAI2SEL_1 (0x2UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00200000 */ +#define RCC_CCIPR3_SAI2SEL_2 (0x4UL << RCC_CCIPR3_SAI2SEL_Pos) /*!< 0x00400000 */ + +/******************** Bit definition for RCC_CCIPR4 register ************/ +#define RCC_CCIPR4_LPUART1SEL_Pos (0U) +#define RCC_CCIPR4_LPUART1SEL_Msk (0x7UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000007 */ +#define RCC_CCIPR4_LPUART1SEL RCC_CCIPR4_LPUART1SEL_Msk +#define RCC_CCIPR4_LPUART1SEL_0 (0x1UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR4_LPUART1SEL_1 (0x2UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000002 */ +#define RCC_CCIPR4_LPUART1SEL_2 (0x4UL << RCC_CCIPR4_LPUART1SEL_Pos) /*!< 0x00000004 */ + +#define RCC_CCIPR4_SPI6SEL_Pos (4U) +#define RCC_CCIPR4_SPI6SEL_Msk (0x7UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000070 */ +#define RCC_CCIPR4_SPI6SEL RCC_CCIPR4_SPI6SEL_Msk +#define RCC_CCIPR4_SPI6SEL_0 (0x1UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000010 */ +#define RCC_CCIPR4_SPI6SEL_1 (0x2UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000020 */ +#define RCC_CCIPR4_SPI6SEL_2 (0x4UL << RCC_CCIPR4_SPI6SEL_Pos) /*!< 0x00000040 */ + +#define RCC_CCIPR4_LPTIM23SEL_Pos (8U) +#define RCC_CCIPR4_LPTIM23SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000700 */ +#define RCC_CCIPR4_LPTIM23SEL RCC_CCIPR4_LPTIM23SEL_Msk +#define RCC_CCIPR4_LPTIM23SEL_0 (0x1UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000100 */ +#define RCC_CCIPR4_LPTIM23SEL_1 (0x2UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000200 */ +#define RCC_CCIPR4_LPTIM23SEL_2 (0x4UL << RCC_CCIPR4_LPTIM23SEL_Pos) /*!< 0x00000400 */ + +#define RCC_CCIPR4_LPTIM45SEL_Pos (12U) +#define RCC_CCIPR4_LPTIM45SEL_Msk (0x7UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00007000 */ +#define RCC_CCIPR4_LPTIM45SEL RCC_CCIPR4_LPTIM45SEL_Msk +#define RCC_CCIPR4_LPTIM45SEL_0 (0x1UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR4_LPTIM45SEL_1 (0x2UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00002000 */ +#define RCC_CCIPR4_LPTIM45SEL_2 (0x4UL << RCC_CCIPR4_LPTIM45SEL_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSIRDYIE_Pos (0U) +#define RCC_CIER_LSIRDYIE_Msk (0x1UL << RCC_CIER_LSIRDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (2U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (3U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_CSIRDYIE_Pos (4U) +#define RCC_CIER_CSIRDYIE_Msk (0x1UL << RCC_CIER_CSIRDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_CSIRDYIE RCC_CIER_CSIRDYIE_Msk +#define RCC_CIER_HSI48RDYIE_Pos (5U) +#define RCC_CIER_HSI48RDYIE_Msk (0x1UL << RCC_CIER_HSI48RDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE_Msk +#define RCC_CIER_PLL1RDYIE_Pos (6U) +#define RCC_CIER_PLL1RDYIE_Msk (0x1UL << RCC_CIER_PLL1RDYIE_Pos) /*!< 0x00000040 */ +#define RCC_CIER_PLL1RDYIE RCC_CIER_PLL1RDYIE_Msk +#define RCC_CIER_PLL2RDYIE_Pos (7U) +#define RCC_CIER_PLL2RDYIE_Msk (0x1UL << RCC_CIER_PLL2RDYIE_Pos) /*!< 0x00000080 */ +#define RCC_CIER_PLL2RDYIE RCC_CIER_PLL2RDYIE_Msk +#define RCC_CIER_PLL3RDYIE_Pos (8U) +#define RCC_CIER_PLL3RDYIE_Msk (0x1UL << RCC_CIER_PLL3RDYIE_Pos) /*!< 0x00000100 */ +#define RCC_CIER_PLL3RDYIE RCC_CIER_PLL3RDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSIRDYF_Pos (0U) +#define RCC_CIFR_LSIRDYF_Msk (0x1UL << RCC_CIFR_LSIRDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (2U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (3U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_CSIRDYF_Pos (4U) +#define RCC_CIFR_CSIRDYF_Msk (0x1UL << RCC_CIFR_CSIRDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_CSIRDYF RCC_CIFR_CSIRDYF_Msk +#define RCC_CIFR_HSI48RDYF_Pos (5U) +#define RCC_CIFR_HSI48RDYF_Msk (0x1UL << RCC_CIFR_HSI48RDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF_Msk +#define RCC_CIFR_PLL1RDYF_Pos (6U) +#define RCC_CIFR_PLL1RDYF_Msk (0x1UL << RCC_CIFR_PLL1RDYF_Pos) /*!< 0x00000040 */ +#define RCC_CIFR_PLL1RDYF RCC_CIFR_PLL1RDYF_Msk +#define RCC_CIFR_PLL2RDYF_Pos (7U) +#define RCC_CIFR_PLL2RDYF_Msk (0x1UL << RCC_CIFR_PLL2RDYF_Pos) /*!< 0x00000080 */ +#define RCC_CIFR_PLL2RDYF RCC_CIFR_PLL2RDYF_Msk +#define RCC_CIFR_PLL3RDYF_Pos (8U) +#define RCC_CIFR_PLL3RDYF_Msk (0x1UL << RCC_CIFR_PLL3RDYF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_PLL3RDYF RCC_CIFR_PLL3RDYF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_HSECSSF_Pos (10U) +#define RCC_CIFR_HSECSSF_Msk (0x1UL << RCC_CIFR_HSECSSF_Pos) /*!< 0x00000400 */ +#define RCC_CIFR_HSECSSF RCC_CIFR_HSECSSF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSIRDYC_Pos (0U) +#define RCC_CICR_LSIRDYC_Msk (0x1UL << RCC_CICR_LSIRDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (2U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (3U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_CSIRDYC_Pos (4U) +#define RCC_CICR_CSIRDYC_Msk (0x1UL << RCC_CICR_CSIRDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_CSIRDYC RCC_CICR_CSIRDYC_Msk +#define RCC_CICR_HSI48RDYC_Pos (5U) +#define RCC_CICR_HSI48RDYC_Msk (0x1UL << RCC_CICR_HSI48RDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC_Msk +#define RCC_CICR_PLL1RDYC_Pos (6U) +#define RCC_CICR_PLL1RDYC_Msk (0x1UL << RCC_CICR_PLL1RDYC_Pos) /*!< 0x00000040 */ +#define RCC_CICR_PLL1RDYC RCC_CICR_PLL1RDYC_Msk +#define RCC_CICR_PLL2RDYC_Pos (7U) +#define RCC_CICR_PLL2RDYC_Msk (0x1UL << RCC_CICR_PLL2RDYC_Pos) /*!< 0x00000080 */ +#define RCC_CICR_PLL2RDYC RCC_CICR_PLL2RDYC_Msk +#define RCC_CICR_PLL3RDYC_Pos (8U) +#define RCC_CICR_PLL3RDYC_Msk (0x1UL << RCC_CICR_PLL3RDYC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_PLL3RDYC RCC_CICR_PLL3RDYC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_HSECSSC_Pos (10U) +#define RCC_CICR_HSECSSC_Msk (0x1UL << RCC_CICR_HSECSSC_Pos) /*!< 0x00000400 */ +#define RCC_CICR_HSECSSC RCC_CICR_HSECSSC_Msk + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk +#define RCC_BDCR_LSEEXT_Pos (7U) +#define RCC_BDCR_LSEEXT_Msk (0x1UL << RCC_BDCR_LSEEXT_Pos) /*!< 0x00000080 */ +#define RCC_BDCR_LSEEXT RCC_BDCR_LSEEXT_Msk +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ +#define RCC_BDCR_LSECSSRA_Pos (12U) +#define RCC_BDCR_LSECSSRA_Msk (0x1UL << RCC_BDCR_LSECSSRA_Pos) /*!< 0x00001000 */ +#define RCC_BDCR_LSECSSRA RCC_BDCR_LSECSSRA_Msk + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk +#define RCC_BDCR_VSWRST_Pos (16U) +#define RCC_BDCR_VSWRST_Msk (0x1UL << RCC_BDCR_VSWRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_VSWRST RCC_BDCR_VSWRST_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSION_Pos (0U) +#define RCC_CSR_LSION_Msk (0x1UL << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSION RCC_CSR_LSION_Msk +#define RCC_CSR_LSIRDY_Pos (1U) +#define RCC_CSR_LSIRDY_Msk (0x1UL << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_GPDMA1RST_Pos (4U) +#define RCC_AHB1RSTR_GPDMA1RST_Msk (0x1UL << RCC_AHB1RSTR_GPDMA1RST_Pos) /*!< 0x00000010 */ +#define RCC_AHB1RSTR_GPDMA1RST RCC_AHB1RSTR_GPDMA1RST_Msk +#define RCC_AHB1RSTR_ADC12RST_Pos (5U) +#define RCC_AHB1RSTR_ADC12RST_Msk (0x1UL << RCC_AHB1RSTR_ADC12RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB1RSTR_ADC12RST RCC_AHB1RSTR_ADC12RST_Msk +#define RCC_AHB1RSTR_ETH1RST_Pos (15U) +#define RCC_AHB1RSTR_ETH1RST_Msk (0x1UL << RCC_AHB1RSTR_ETH1RST_Pos) /*!< 0x00008000 */ +#define RCC_AHB1RSTR_ETH1RST RCC_AHB1RSTR_ETH1RST_Msk +#define RCC_AHB1RSTR_OTGHSRST_Pos (25U) +#define RCC_AHB1RSTR_OTGHSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGHSRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB1RSTR_OTGHSRST RCC_AHB1RSTR_OTGHSRST_Msk +#define RCC_AHB1RSTR_USBPHYCRST_Pos (26U) +#define RCC_AHB1RSTR_USBPHYCRST_Msk (0x1UL << RCC_AHB1RSTR_USBPHYCRST_Pos) /*!< 0x04000000 */ +#define RCC_AHB1RSTR_USBPHYCRST RCC_AHB1RSTR_USBPHYCRST_Msk +#define RCC_AHB1RSTR_OTGFSRST_Pos (27U) +#define RCC_AHB1RSTR_OTGFSRST_Msk (0x1UL << RCC_AHB1RSTR_OTGFSRST_Pos) /*!< 0x08000000 */ +#define RCC_AHB1RSTR_OTGFSRST RCC_AHB1RSTR_OTGFSRST_Msk +#define RCC_AHB1RSTR_ADF1RST_Pos (31U) +#define RCC_AHB1RSTR_ADF1RST_Msk (0x1UL << RCC_AHB1RSTR_ADF1RST_Pos) /*!< 0x80000000 */ +#define RCC_AHB1RSTR_ADF1RST RCC_AHB1RSTR_ADF1RST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register **************/ +#define RCC_AHB2RSTR_PSSIRST_Pos (1U) +#define RCC_AHB2RSTR_PSSIRST_Msk (0x1UL << RCC_AHB2RSTR_PSSIRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_PSSIRST RCC_AHB2RSTR_PSSIRST_Msk +#define RCC_AHB2RSTR_SDMMC2RST_Pos (9U) +#define RCC_AHB2RSTR_SDMMC2RST_Msk (0x1UL << RCC_AHB2RSTR_SDMMC2RST_Pos) /*!< 0x00000200 */ +#define RCC_AHB2RSTR_SDMMC2RST RCC_AHB2RSTR_SDMMC2RST_Msk +#define RCC_AHB2RSTR_CORDICRST_Pos (14U) +#define RCC_AHB2RSTR_CORDICRST_Msk (0x1UL << RCC_AHB2RSTR_CORDICRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB2RSTR_CORDICRST RCC_AHB2RSTR_CORDICRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register **************/ +#define RCC_AHB3RSTR_RNGRST_Pos (0U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00000001 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HASHRST_Pos (1U) +#define RCC_AHB3RSTR_HASHRST_Msk (0x1UL << RCC_AHB3RSTR_HASHRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB3RSTR_HASHRST RCC_AHB3RSTR_HASHRST_Msk +#define RCC_AHB3RSTR_CRYPRST_Pos (2U) +#define RCC_AHB3RSTR_CRYPRST_Msk (0x1UL << RCC_AHB3RSTR_CRYPRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB3RSTR_CRYPRST RCC_AHB3RSTR_CRYPRST_Msk +#define RCC_AHB3RSTR_SAESRST_Pos (4U) +#define RCC_AHB3RSTR_SAESRST_Msk (0x1UL << RCC_AHB3RSTR_SAESRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB3RSTR_SAESRST RCC_AHB3RSTR_SAESRST_Msk +#define RCC_AHB3RSTR_PKARST_Pos (6U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00000040 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk + +/******************** Bit definition for RCC_AHB4RSTR register **************/ +#define RCC_AHB4RSTR_GPIOARST_Pos (0U) +#define RCC_AHB4RSTR_GPIOARST_Msk (0x1UL << RCC_AHB4RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB4RSTR_GPIOARST RCC_AHB4RSTR_GPIOARST_Msk +#define RCC_AHB4RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB4RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB4RSTR_GPIOBRST RCC_AHB4RSTR_GPIOBRST_Msk +#define RCC_AHB4RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB4RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB4RSTR_GPIOCRST RCC_AHB4RSTR_GPIOCRST_Msk +#define RCC_AHB4RSTR_GPIODRST_Pos (3U) +#define RCC_AHB4RSTR_GPIODRST_Msk (0x1UL << RCC_AHB4RSTR_GPIODRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB4RSTR_GPIODRST RCC_AHB4RSTR_GPIODRST_Msk +#define RCC_AHB4RSTR_GPIOERST_Pos (4U) +#define RCC_AHB4RSTR_GPIOERST_Msk (0x1UL << RCC_AHB4RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB4RSTR_GPIOERST RCC_AHB4RSTR_GPIOERST_Msk +#define RCC_AHB4RSTR_GPIOFRST_Pos (5U) +#define RCC_AHB4RSTR_GPIOFRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOFRST_Pos) /*!< 0x00000020 */ +#define RCC_AHB4RSTR_GPIOFRST RCC_AHB4RSTR_GPIOFRST_Msk +#define RCC_AHB4RSTR_GPIOGRST_Pos (6U) +#define RCC_AHB4RSTR_GPIOGRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOGRST_Pos) /*!< 0x00000040 */ +#define RCC_AHB4RSTR_GPIOGRST RCC_AHB4RSTR_GPIOGRST_Msk +#define RCC_AHB4RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB4RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB4RSTR_GPIOHRST RCC_AHB4RSTR_GPIOHRST_Msk +#define RCC_AHB4RSTR_GPIOMRST_Pos (12U) +#define RCC_AHB4RSTR_GPIOMRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOMRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB4RSTR_GPIOMRST RCC_AHB4RSTR_GPIOMRST_Msk +#define RCC_AHB4RSTR_GPIONRST_Pos (13U) +#define RCC_AHB4RSTR_GPIONRST_Msk (0x1UL << RCC_AHB4RSTR_GPIONRST_Pos) /*!< 0x00002000 */ +#define RCC_AHB4RSTR_GPIONRST RCC_AHB4RSTR_GPIONRST_Msk +#define RCC_AHB4RSTR_GPIOORST_Pos (14U) +#define RCC_AHB4RSTR_GPIOORST_Msk (0x1UL << RCC_AHB4RSTR_GPIOORST_Pos) /*!< 0x00004000 */ +#define RCC_AHB4RSTR_GPIOORST RCC_AHB4RSTR_GPIOORST_Msk +#define RCC_AHB4RSTR_GPIOPRST_Pos (15U) +#define RCC_AHB4RSTR_GPIOPRST_Msk (0x1UL << RCC_AHB4RSTR_GPIOPRST_Pos) /*!< 0x00008000 */ +#define RCC_AHB4RSTR_GPIOPRST RCC_AHB4RSTR_GPIOPRST_Msk +#define RCC_AHB4RSTR_CRCRST_Pos (19U) +#define RCC_AHB4RSTR_CRCRST_Msk (0x1UL << RCC_AHB4RSTR_CRCRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB4RSTR_CRCRST RCC_AHB4RSTR_CRCRST_Msk + +/******************** Bit definition for RCC_AHB5RSTR register **************/ +#define RCC_AHB5RSTR_HPDMA1RST_Pos (0U) +#define RCC_AHB5RSTR_HPDMA1RST_Msk (0x1UL << RCC_AHB5RSTR_HPDMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB5RSTR_HPDMA1RST RCC_AHB5RSTR_HPDMA1RST_Msk +#define RCC_AHB5RSTR_DMA2DRST_Pos (1U) +#define RCC_AHB5RSTR_DMA2DRST_Msk (0x1UL << RCC_AHB5RSTR_DMA2DRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB5RSTR_DMA2DRST RCC_AHB5RSTR_DMA2DRST_Msk +#define RCC_AHB5RSTR_JPEGRST_Pos (3U) +#define RCC_AHB5RSTR_JPEGRST_Msk (0x1UL << RCC_AHB5RSTR_JPEGRST_Pos) /*!< 0x00000008 */ +#define RCC_AHB5RSTR_JPEGRST RCC_AHB5RSTR_JPEGRST_Msk +#define RCC_AHB5RSTR_FMCRST_Pos (4U) +#define RCC_AHB5RSTR_FMCRST_Msk (0x1UL << RCC_AHB5RSTR_FMCRST_Pos) /*!< 0x00000010 */ +#define RCC_AHB5RSTR_FMCRST RCC_AHB5RSTR_FMCRST_Msk +#define RCC_AHB5RSTR_XSPI1RST_Pos (5U) +#define RCC_AHB5RSTR_XSPI1RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI1RST_Pos) /*!< 0x00000020 */ +#define RCC_AHB5RSTR_XSPI1RST RCC_AHB5RSTR_XSPI1RST_Msk +#define RCC_AHB5RSTR_SDMMC1RST_Pos (8U) +#define RCC_AHB5RSTR_SDMMC1RST_Msk (0x1UL << RCC_AHB5RSTR_SDMMC1RST_Pos) /*!< 0x00000100 */ +#define RCC_AHB5RSTR_SDMMC1RST RCC_AHB5RSTR_SDMMC1RST_Msk +#define RCC_AHB5RSTR_XSPI2RST_Pos (12U) +#define RCC_AHB5RSTR_XSPI2RST_Msk (0x1UL << RCC_AHB5RSTR_XSPI2RST_Pos) /*!< 0x00001000 */ +#define RCC_AHB5RSTR_XSPI2RST RCC_AHB5RSTR_XSPI2RST_Msk +#define RCC_AHB5RSTR_XSPIMRST_Pos (14U) +#define RCC_AHB5RSTR_XSPIMRST_Msk (0x1UL << RCC_AHB5RSTR_XSPIMRST_Pos) /*!< 0x00004000 */ +#define RCC_AHB5RSTR_XSPIMRST RCC_AHB5RSTR_XSPIMRST_Msk +#define RCC_AHB5RSTR_GFXMMURST_Pos (19U) +#define RCC_AHB5RSTR_GFXMMURST_Msk (0x1UL << RCC_AHB5RSTR_GFXMMURST_Pos) /*!< 0x00080000 */ +#define RCC_AHB5RSTR_GFXMMURST RCC_AHB5RSTR_GFXMMURST_Msk +#define RCC_AHB5RSTR_GPU2DRST_Pos (20U) +#define RCC_AHB5RSTR_GPU2DRST_Msk (0x1UL << RCC_AHB5RSTR_GPU2DRST_Pos) /*!< 0x00100000 */ +#define RCC_AHB5RSTR_GPU2DRST RCC_AHB5RSTR_GPU2DRST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register *************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_TIM3RST_Pos (1U) +#define RCC_APB1RSTR1_TIM3RST_Msk (0x1UL << RCC_APB1RSTR1_TIM3RST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR1_TIM3RST RCC_APB1RSTR1_TIM3RST_Msk +#define RCC_APB1RSTR1_TIM4RST_Pos (2U) +#define RCC_APB1RSTR1_TIM4RST_Msk (0x1UL << RCC_APB1RSTR1_TIM4RST_Pos) /*!< 0x00000004 */ +#define RCC_APB1RSTR1_TIM4RST RCC_APB1RSTR1_TIM4RST_Msk +#define RCC_APB1RSTR1_TIM5RST_Pos (3U) +#define RCC_APB1RSTR1_TIM5RST_Msk (0x1UL << RCC_APB1RSTR1_TIM5RST_Pos) /*!< 0x00000008 */ +#define RCC_APB1RSTR1_TIM5RST RCC_APB1RSTR1_TIM5RST_Msk +#define RCC_APB1RSTR1_TIM6RST_Pos (4U) +#define RCC_APB1RSTR1_TIM6RST_Msk (0x1UL << RCC_APB1RSTR1_TIM6RST_Pos) /*!< 0x00000010 */ +#define RCC_APB1RSTR1_TIM6RST RCC_APB1RSTR1_TIM6RST_Msk +#define RCC_APB1RSTR1_TIM7RST_Pos (5U) +#define RCC_APB1RSTR1_TIM7RST_Msk (0x1UL << RCC_APB1RSTR1_TIM7RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR1_TIM7RST RCC_APB1RSTR1_TIM7RST_Msk +#define RCC_APB1RSTR1_TIM12RST_Pos (6U) +#define RCC_APB1RSTR1_TIM12RST_Msk (0x1UL << RCC_APB1RSTR1_TIM12RST_Pos) /*!< 0x00000040 */ +#define RCC_APB1RSTR1_TIM12RST RCC_APB1RSTR1_TIM12RST_Msk +#define RCC_APB1RSTR1_TIM13RST_Pos (7U) +#define RCC_APB1RSTR1_TIM13RST_Msk (0x1UL << RCC_APB1RSTR1_TIM13RST_Pos) /*!< 0x00000080 */ +#define RCC_APB1RSTR1_TIM13RST RCC_APB1RSTR1_TIM13RST_Msk +#define RCC_APB1RSTR1_TIM14RST_Pos (8U) +#define RCC_APB1RSTR1_TIM14RST_Msk (0x1UL << RCC_APB1RSTR1_TIM14RST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR1_TIM14RST RCC_APB1RSTR1_TIM14RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (9U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x00000200 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk +#define RCC_APB1RSTR1_SPI2RST_Pos (14U) +#define RCC_APB1RSTR1_SPI2RST_Msk (0x1UL << RCC_APB1RSTR1_SPI2RST_Pos) /*!< 0x00004000 */ +#define RCC_APB1RSTR1_SPI2RST RCC_APB1RSTR1_SPI2RST_Msk +#define RCC_APB1RSTR1_SPI3RST_Pos (15U) +#define RCC_APB1RSTR1_SPI3RST_Msk (0x1UL << RCC_APB1RSTR1_SPI3RST_Pos) /*!< 0x00008000 */ +#define RCC_APB1RSTR1_SPI3RST RCC_APB1RSTR1_SPI3RST_Msk +#define RCC_APB1RSTR1_SPDIFRXRST_Pos (16U) +#define RCC_APB1RSTR1_SPDIFRXRST_Msk (0x1UL << RCC_APB1RSTR1_SPDIFRXRST_Pos) /*!< 0x00010000 */ +#define RCC_APB1RSTR1_SPDIFRXRST RCC_APB1RSTR1_SPDIFRXRST_Msk +#define RCC_APB1RSTR1_USART2RST_Pos (17U) +#define RCC_APB1RSTR1_USART2RST_Msk (0x1UL << RCC_APB1RSTR1_USART2RST_Pos) /*!< 0x00020000 */ +#define RCC_APB1RSTR1_USART2RST RCC_APB1RSTR1_USART2RST_Msk +#define RCC_APB1RSTR1_USART3RST_Pos (18U) +#define RCC_APB1RSTR1_USART3RST_Msk (0x1UL << RCC_APB1RSTR1_USART3RST_Pos) /*!< 0x00040000 */ +#define RCC_APB1RSTR1_USART3RST RCC_APB1RSTR1_USART3RST_Msk +#define RCC_APB1RSTR1_UART4RST_Pos (19U) +#define RCC_APB1RSTR1_UART4RST_Msk (0x1UL << RCC_APB1RSTR1_UART4RST_Pos) /*!< 0x00080000 */ +#define RCC_APB1RSTR1_UART4RST RCC_APB1RSTR1_UART4RST_Msk +#define RCC_APB1RSTR1_UART5RST_Pos (20U) +#define RCC_APB1RSTR1_UART5RST_Msk (0x1UL << RCC_APB1RSTR1_UART5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB1RSTR1_UART5RST RCC_APB1RSTR1_UART5RST_Msk +#define RCC_APB1RSTR1_I2C1_I3C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1_I3C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1_I3C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1_I3C1RST RCC_APB1RSTR1_I2C1_I3C1RST_Msk +#define RCC_APB1RSTR1_I2C2RST_Pos (22U) +#define RCC_APB1RSTR1_I2C2RST_Msk (0x1UL << RCC_APB1RSTR1_I2C2RST_Pos) /*!< 0x00400000 */ +#define RCC_APB1RSTR1_I2C2RST RCC_APB1RSTR1_I2C2RST_Msk +#define RCC_APB1RSTR1_I2C3RST_Pos (23U) +#define RCC_APB1RSTR1_I2C3RST_Msk (0x1UL << RCC_APB1RSTR1_I2C3RST_Pos) /*!< 0x00800000 */ +#define RCC_APB1RSTR1_I2C3RST RCC_APB1RSTR1_I2C3RST_Msk +#define RCC_APB1RSTR1_CECRST_Pos (27U) +#define RCC_APB1RSTR1_CECRST_Msk (0x1UL << RCC_APB1RSTR1_CECRST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR1_CECRST RCC_APB1RSTR1_CECRST_Msk +#define RCC_APB1RSTR1_UART7RST_Pos (30U) +#define RCC_APB1RSTR1_UART7RST_Msk (0x1UL << RCC_APB1RSTR1_UART7RST_Pos) /*!< 0x40000000 */ +#define RCC_APB1RSTR1_UART7RST RCC_APB1RSTR1_UART7RST_Msk +#define RCC_APB1RSTR1_UART8RST_Pos (31U) +#define RCC_APB1RSTR1_UART8RST_Msk (0x1UL << RCC_APB1RSTR1_UART8RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_UART8RST RCC_APB1RSTR1_UART8RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register *************/ +#define RCC_APB1RSTR2_CRSRST_Pos (1U) +#define RCC_APB1RSTR2_CRSRST_Msk (0x1UL << RCC_APB1RSTR2_CRSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB1RSTR2_CRSRST RCC_APB1RSTR2_CRSRST_Msk +#define RCC_APB1RSTR2_MDIOSRST_Pos (5U) +#define RCC_APB1RSTR2_MDIOSRST_Msk (0x1UL << RCC_APB1RSTR2_MDIOSRST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_MDIOSRST RCC_APB1RSTR2_MDIOSRST_Msk +#define RCC_APB1RSTR2_FDCANRST_Pos (8U) +#define RCC_APB1RSTR2_FDCANRST_Msk (0x1UL << RCC_APB1RSTR2_FDCANRST_Pos) /*!< 0x00000100 */ +#define RCC_APB1RSTR2_FDCANRST RCC_APB1RSTR2_FDCANRST_Msk +#define RCC_APB1RSTR2_UCPD1RST_Pos (27U) +#define RCC_APB1RSTR2_UCPD1RST_Msk (0x1UL << RCC_APB1RSTR2_UCPD1RST_Pos) /*!< 0x08000000 */ +#define RCC_APB1RSTR2_UCPD1RST RCC_APB1RSTR2_UCPD1RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_TIM1RST_Pos (0U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000001 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (4U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00000010 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_SPI4RST_Pos (13U) +#define RCC_APB2RSTR_SPI4RST_Msk (0x1UL << RCC_APB2RSTR_SPI4RST_Pos) /*!< 0x00002000 */ +#define RCC_APB2RSTR_SPI4RST RCC_APB2RSTR_SPI4RST_Msk +#define RCC_APB2RSTR_TIM15RST_Pos (16U) +#define RCC_APB2RSTR_TIM15RST_Msk (0x1UL << RCC_APB2RSTR_TIM15RST_Pos) /*!< 0x00010000 */ +#define RCC_APB2RSTR_TIM15RST RCC_APB2RSTR_TIM15RST_Msk +#define RCC_APB2RSTR_TIM16RST_Pos (17U) +#define RCC_APB2RSTR_TIM16RST_Msk (0x1UL << RCC_APB2RSTR_TIM16RST_Pos) /*!< 0x00020000 */ +#define RCC_APB2RSTR_TIM16RST RCC_APB2RSTR_TIM16RST_Msk +#define RCC_APB2RSTR_TIM17RST_Pos (18U) +#define RCC_APB2RSTR_TIM17RST_Msk (0x1UL << RCC_APB2RSTR_TIM17RST_Pos) /*!< 0x00040000 */ +#define RCC_APB2RSTR_TIM17RST RCC_APB2RSTR_TIM17RST_Msk +#define RCC_APB2RSTR_TIM9RST_Pos (19U) +#define RCC_APB2RSTR_TIM9RST_Msk (0x1UL << RCC_APB2RSTR_TIM9RST_Pos) /*!< 0x00080000 */ +#define RCC_APB2RSTR_TIM9RST RCC_APB2RSTR_TIM9RST_Msk +#define RCC_APB2RSTR_SPI5RST_Pos (20U) +#define RCC_APB2RSTR_SPI5RST_Msk (0x1UL << RCC_APB2RSTR_SPI5RST_Pos) /*!< 0x00100000 */ +#define RCC_APB2RSTR_SPI5RST RCC_APB2RSTR_SPI5RST_Msk +#define RCC_APB2RSTR_SAI1RST_Pos (22U) +#define RCC_APB2RSTR_SAI1RST_Msk (0x1UL << RCC_APB2RSTR_SAI1RST_Pos) /*!< 0x00400000 */ +#define RCC_APB2RSTR_SAI1RST RCC_APB2RSTR_SAI1RST_Msk +#define RCC_APB2RSTR_SAI2RST_Pos (23U) +#define RCC_APB2RSTR_SAI2RST_Msk (0x1UL << RCC_APB2RSTR_SAI2RST_Pos) /*!< 0x00800000 */ +#define RCC_APB2RSTR_SAI2RST RCC_APB2RSTR_SAI2RST_Msk + +/******************** Bit definition for RCC_APB4RSTR register **************/ +#define RCC_APB4RSTR_SBSRST_Pos (1U) +#define RCC_APB4RSTR_SBSRST_Msk (0x1UL << RCC_APB4RSTR_SBSRST_Pos) /*!< 0x00000002 */ +#define RCC_APB4RSTR_SBSRST RCC_APB4RSTR_SBSRST_Msk +#define RCC_APB4RSTR_LPUART1RST_Pos (3U) +#define RCC_APB4RSTR_LPUART1RST_Msk (0x1UL << RCC_APB4RSTR_LPUART1RST_Pos) /*!< 0x00000008 */ +#define RCC_APB4RSTR_LPUART1RST RCC_APB4RSTR_LPUART1RST_Msk +#define RCC_APB4RSTR_SPI6RST_Pos (5U) +#define RCC_APB4RSTR_SPI6RST_Msk (0x1UL << RCC_APB4RSTR_SPI6RST_Pos) /*!< 0x00000020 */ +#define RCC_APB4RSTR_SPI6RST RCC_APB4RSTR_SPI6RST_Msk +#define RCC_APB4RSTR_LPTIM2RST_Pos (9U) +#define RCC_APB4RSTR_LPTIM2RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM2RST_Pos) /*!< 0x00000200 */ +#define RCC_APB4RSTR_LPTIM2RST RCC_APB4RSTR_LPTIM2RST_Msk +#define RCC_APB4RSTR_LPTIM3RST_Pos (10U) +#define RCC_APB4RSTR_LPTIM3RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM3RST_Pos) /*!< 0x00000400 */ +#define RCC_APB4RSTR_LPTIM3RST RCC_APB4RSTR_LPTIM3RST_Msk +#define RCC_APB4RSTR_LPTIM4RST_Pos (11U) +#define RCC_APB4RSTR_LPTIM4RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM4RST_Pos) /*!< 0x00000800 */ +#define RCC_APB4RSTR_LPTIM4RST RCC_APB4RSTR_LPTIM4RST_Msk +#define RCC_APB4RSTR_LPTIM5RST_Pos (12U) +#define RCC_APB4RSTR_LPTIM5RST_Msk (0x1UL << RCC_APB4RSTR_LPTIM5RST_Pos) /*!< 0x00001000 */ +#define RCC_APB4RSTR_LPTIM5RST RCC_APB4RSTR_LPTIM5RST_Msk +#define RCC_APB4RSTR_VREFRST_Pos (15U) +#define RCC_APB4RSTR_VREFRST_Msk (0x1UL << RCC_APB4RSTR_VREFRST_Pos) /*!< 0x00008000 */ +#define RCC_APB4RSTR_VREFRST RCC_APB4RSTR_VREFRST_Msk +#define RCC_APB4RSTR_DTSRST_Pos (26U) +#define RCC_APB4RSTR_DTSRST_Msk (0x1UL << RCC_APB4RSTR_DTSRST_Pos) /*!< 0x04000000 */ +#define RCC_APB4RSTR_DTSRST RCC_APB4RSTR_DTSRST_Msk + +/******************** Bit definition for RCC_APB5RSTR register **************/ +#define RCC_APB5RSTR_LTDCRST_Pos (1U) +#define RCC_APB5RSTR_LTDCRST_Msk (0x1UL << RCC_APB5RSTR_LTDCRST_Pos) /*!< 0x00000002 */ +#define RCC_APB5RSTR_LTDCRST RCC_APB5RSTR_LTDCRST_Msk +#define RCC_APB5RSTR_DCMIPPRST_Pos (2U) +#define RCC_APB5RSTR_DCMIPPRST_Msk (0x1UL << RCC_APB5RSTR_DCMIPPRST_Pos) /*!< 0x00000004 */ +#define RCC_APB5RSTR_DCMIPPRST RCC_APB5RSTR_DCMIPPRST_Msk +#define RCC_APB5RSTR_GFXTIMRST_Pos (4U) +#define RCC_APB5RSTR_GFXTIMRST_Msk (0x1UL << RCC_APB5RSTR_GFXTIMRST_Pos) /*!< 0x00000010 */ +#define RCC_APB5RSTR_GFXTIMRST RCC_APB5RSTR_GFXTIMRST_Msk + +/******************** Bit definition for RCC_CKGDISR register ***************/ +#define RCC_CKGDISR_AXICKG_Pos (0U) +#define RCC_CKGDISR_AXICKG_Msk (0x1UL << RCC_CKGDISR_AXICKG_Pos) /*!< 0x00000001 */ +#define RCC_CKGDISR_AXICKG RCC_CKGDISR_AXICKG_Msk +#define RCC_CKGDISR_AHBMCKG_Pos (1U) +#define RCC_CKGDISR_AHBMCKG_Msk (0x1UL << RCC_CKGDISR_AHBMCKG_Pos) /*!< 0x00000002 */ +#define RCC_CKGDISR_AHBMCKG RCC_CKGDISR_AHBMCKG_Msk +#define RCC_CKGDISR_SDMMC1CKG_Pos (2U) +#define RCC_CKGDISR_SDMMC1CKG_Msk (0x1UL << RCC_CKGDISR_SDMMC1CKG_Pos) /*!< 0x00000004 */ +#define RCC_CKGDISR_SDMMC1CKG RCC_CKGDISR_SDMMC1CKG_Msk +#define RCC_CKGDISR_HPDMA1CKG_Pos (3U) +#define RCC_CKGDISR_HPDMA1CKG_Msk (0x1UL << RCC_CKGDISR_HPDMA1CKG_Pos) /*!< 0x00000008 */ +#define RCC_CKGDISR_HPDMA1CKG RCC_CKGDISR_HPDMA1CKG_Msk +#define RCC_CKGDISR_CPUCKG_Pos (4U) +#define RCC_CKGDISR_CPUCKG_Msk (0x1UL << RCC_CKGDISR_CPUCKG_Pos) /*!< 0x00000010 */ +#define RCC_CKGDISR_CPUCKG RCC_CKGDISR_CPUCKG_Msk +#define RCC_CKGDISR_GPU2DS0CKG_Pos (5U) +#define RCC_CKGDISR_GPU2DS0CKG_Msk (0x1UL << RCC_CKGDISR_GPU2DS0CKG_Pos) /*!< 0x00000020 */ +#define RCC_CKGDISR_GPU2DS0CKG RCC_CKGDISR_GPU2DS0CKG_Msk +#define RCC_CKGDISR_GPU2DS1CKG_Pos (6U) +#define RCC_CKGDISR_GPU2DS1CKG_Msk (0x1UL << RCC_CKGDISR_GPU2DS1CKG_Pos) /*!< 0x00000040 */ +#define RCC_CKGDISR_GPU2DS1CKG RCC_CKGDISR_GPU2DS1CKG_Msk +#define RCC_CKGDISR_GPU2DCLCKG_Pos (7U) +#define RCC_CKGDISR_GPU2DCLCKG_Msk (0x1UL << RCC_CKGDISR_GPU2DCLCKG_Pos) /*!< 0x00000080 */ +#define RCC_CKGDISR_GPU2DCLCKG RCC_CKGDISR_GPU2DCLCKG_Msk +#define RCC_CKGDISR_DCMIPPCKG_Pos (8U) +#define RCC_CKGDISR_DCMIPPCKG_Msk (0x1UL << RCC_CKGDISR_DCMIPPCKG_Pos) /*!< 0x00000100 */ +#define RCC_CKGDISR_DCMIPPCKG RCC_CKGDISR_DCMIPPCKG_Msk +#define RCC_CKGDISR_DMA2DCKG_Pos (9U) +#define RCC_CKGDISR_DMA2DCKG_Msk (0x1UL << RCC_CKGDISR_DMA2DCKG_Pos) /*!< 0x00000200 */ +#define RCC_CKGDISR_DMA2DCKG RCC_CKGDISR_DMA2DCKG_Msk +#define RCC_CKGDISR_GFXMMUSCKG_Pos (10U) +#define RCC_CKGDISR_GFXMMUSCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUSCKG_Pos) /*!< 0x00000400 */ +#define RCC_CKGDISR_GFXMMUSCKG RCC_CKGDISR_GFXMMUSCKG_Msk +#define RCC_CKGDISR_LTDCCKG_Pos (11U) +#define RCC_CKGDISR_LTDCCKG_Msk (0x1UL << RCC_CKGDISR_LTDCCKG_Pos) /*!< 0x00000800 */ +#define RCC_CKGDISR_LTDCCKG RCC_CKGDISR_LTDCCKG_Msk +#define RCC_CKGDISR_GFXMMUMCKG_Pos (12U) +#define RCC_CKGDISR_GFXMMUMCKG_Msk (0x1UL << RCC_CKGDISR_GFXMMUMCKG_Pos) /*!< 0x00001000 */ +#define RCC_CKGDISR_GFXMMUMCKG RCC_CKGDISR_GFXMMUMCKG_Msk +#define RCC_CKGDISR_AHBSCKG_Pos (13U) +#define RCC_CKGDISR_AHBSCKG_Msk (0x1UL << RCC_CKGDISR_AHBSCKG_Pos) /*!< 0x00002000 */ +#define RCC_CKGDISR_AHBSCKG RCC_CKGDISR_AHBSCKG_Msk +#define RCC_CKGDISR_FMCCKG_Pos (14U) +#define RCC_CKGDISR_FMCCKG_Msk (0x1UL << RCC_CKGDISR_FMCCKG_Pos) /*!< 0x00004000 */ +#define RCC_CKGDISR_FMCCKG RCC_CKGDISR_FMCCKG_Msk +#define RCC_CKGDISR_XSPI1CKG_Pos (15U) +#define RCC_CKGDISR_XSPI1CKG_Msk (0x1UL << RCC_CKGDISR_XSPI1CKG_Pos) /*!< 0x00008000 */ +#define RCC_CKGDISR_XSPI1CKG RCC_CKGDISR_XSPI1CKG_Msk +#define RCC_CKGDISR_XSPI2CKG_Pos (16U) +#define RCC_CKGDISR_XSPI2CKG_Msk (0x1UL << RCC_CKGDISR_XSPI2CKG_Pos) /*!< 0x00010000 */ +#define RCC_CKGDISR_XSPI2CKG RCC_CKGDISR_XSPI2CKG_Msk +#define RCC_CKGDISR_AXISRAM4CKG_Pos (17U) +#define RCC_CKGDISR_AXISRAM4CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM4CKG_Pos) /*!< 0x00020000 */ +#define RCC_CKGDISR_AXISRAM4CKG RCC_CKGDISR_AXISRAM4CKG_Msk +#define RCC_CKGDISR_AXISRAM3CKG_Pos (18U) +#define RCC_CKGDISR_AXISRAM3CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM3CKG_Pos) /*!< 0x00040000 */ +#define RCC_CKGDISR_AXISRAM3CKG RCC_CKGDISR_AXISRAM3CKG_Msk +#define RCC_CKGDISR_AXISRAM2CKG_Pos (19U) +#define RCC_CKGDISR_AXISRAM2CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM2CKG_Pos) /*!< 0x00080000 */ +#define RCC_CKGDISR_AXISRAM2CKG RCC_CKGDISR_AXISRAM2CKG_Msk +#define RCC_CKGDISR_AXISRAM1CKG_Pos (20U) +#define RCC_CKGDISR_AXISRAM1CKG_Msk (0x1UL << RCC_CKGDISR_AXISRAM1CKG_Pos) /*!< 0x00100000 */ +#define RCC_CKGDISR_AXISRAM1CKG RCC_CKGDISR_AXISRAM1CKG_Msk +#define RCC_CKGDISR_FLASHCKG_Pos (21U) +#define RCC_CKGDISR_FLASHCKG_Msk (0x1UL << RCC_CKGDISR_FLASHCKG_Pos) /*!< 0x00200000 */ +#define RCC_CKGDISR_FLASHCKG RCC_CKGDISR_FLASHCKG_Msk +#define RCC_CKGDISR_EXTICKG_Pos (30U) +#define RCC_CKGDISR_EXTICKG_Msk (0x1UL << RCC_CKGDISR_EXTICKG_Pos) /*!< 0x40000000 */ +#define RCC_CKGDISR_EXTICKG RCC_CKGDISR_EXTICKG_Msk +#define RCC_CKGDISR_JTAGCKG_Pos (31U) +#define RCC_CKGDISR_JTAGCKG_Msk (0x1UL << RCC_CKGDISR_JTAGCKG_Pos) /*!< 0x80000000 */ +#define RCC_CKGDISR_JTAGCKG RCC_CKGDISR_JTAGCKG_Msk + +/******************** Bit definition for RCC_PLL1DIVR2 register *************/ +#define RCC_PLL1DIVR2_DIVS_Pos (0U) +#define RCC_PLL1DIVR2_DIVS_Msk (0x7UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL1DIVR2_DIVS RCC_PLL1DIVR2_DIVS_Msk /*!< DIVS1[2:0] bits: PLL1 DIVS division factor */ +#define RCC_PLL1DIVR2_DIVS_0 (0x1UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL1DIVR2_DIVS_1 (0x2UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL1DIVR2_DIVS_2 (0x4UL << RCC_PLL1DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL2DIVR2 register *************/ +#define RCC_PLL2DIVR2_DIVS_Pos (0U) +#define RCC_PLL2DIVR2_DIVS_Msk (0x7UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL2DIVR2_DIVS RCC_PLL2DIVR2_DIVS_Msk /*!< DIVS2[2:0] bits: PLL2 DIVS division factor */ +#define RCC_PLL2DIVR2_DIVS_0 (0x1UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL2DIVR2_DIVS_1 (0x2UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL2DIVR2_DIVS_2 (0x4UL << RCC_PLL2DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +#define RCC_PLL2DIVR2_DIVT_Pos (8U) +#define RCC_PLL2DIVR2_DIVT_Msk (0x7UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000700 */ +#define RCC_PLL2DIVR2_DIVT RCC_PLL2DIVR2_DIVT_Msk /*!< DIVT2[2:0] bits: PLL2 DIVT division factor */ +#define RCC_PLL2DIVR2_DIVT_0 (0x1UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000100 */ +#define RCC_PLL2DIVR2_DIVT_1 (0x2UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000200 */ +#define RCC_PLL2DIVR2_DIVT_2 (0x4UL << RCC_PLL2DIVR2_DIVT_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for RCC_PLL3DIVR2 register *************/ +#define RCC_PLL3DIVR2_DIVS_Pos (0U) +#define RCC_PLL3DIVR2_DIVS_Msk (0x7UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000007 */ +#define RCC_PLL3DIVR2_DIVS RCC_PLL3DIVR2_DIVS_Msk /*!< DIVS3[2:0] bits: PLL3 DIVS division factor */ +#define RCC_PLL3DIVR2_DIVS_0 (0x1UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000001 */ +#define RCC_PLL3DIVR2_DIVS_1 (0x2UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000002 */ +#define RCC_PLL3DIVR2_DIVS_2 (0x4UL << RCC_PLL3DIVR2_DIVS_Pos) /*!< 0x00000004 */ + +/******************** Bit definition for RCC_PLL1SSCGR register *************/ +#define RCC_PLL1SSCGR_MODPER_Pos (0U) +#define RCC_PLL1SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL1SSCGR_MODPER RCC_PLL1SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL1SSCGR_MODPER_0 (0x0001UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL1SSCGR_MODPER_1 (0x0002UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL1SSCGR_MODPER_2 (0x0004UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL1SSCGR_MODPER_3 (0x0008UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL1SSCGR_MODPER_4 (0x0010UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL1SSCGR_MODPER_5 (0x0020UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL1SSCGR_MODPER_6 (0x0040UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL1SSCGR_MODPER_7 (0x0080UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL1SSCGR_MODPER_8 (0x0100UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL1SSCGR_MODPER_9 (0x0200UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL1SSCGR_MODPER_10 (0x0400UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL1SSCGR_MODPER_11 (0x0800UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL1SSCGR_MODPER_12 (0x1000UL << RCC_PLL1SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL1SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL1SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL1SSCGR_TPDFNDIS RCC_PLL1SSCGR_TPDFNDIS_Msk +#define RCC_PLL1SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL1SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL1SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL1SSCGR_RPDFNDIS RCC_PLL1SSCGR_RPDFNDIS_Msk +#define RCC_PLL1SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL1SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL1SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL1SSCGR_SPREADSEL RCC_PLL1SSCGR_SPREADSEL_Msk +#define RCC_PLL1SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL1SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL1SSCGR_INCSTEP RCC_PLL1SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL1SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL1SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL1SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL1SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL1SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL1SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL1SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL1SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL1SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL1SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL1SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL1SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL1SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL1SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL1SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL1SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL2SSCGR register *************/ +#define RCC_PLL2SSCGR_MODPER_Pos (0U) +#define RCC_PLL2SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL2SSCGR_MODPER RCC_PLL2SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL2SSCGR_MODPER_0 (0x0001UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL2SSCGR_MODPER_1 (0x0002UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL2SSCGR_MODPER_2 (0x0004UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL2SSCGR_MODPER_3 (0x0008UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL2SSCGR_MODPER_4 (0x0010UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL2SSCGR_MODPER_5 (0x0020UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL2SSCGR_MODPER_6 (0x0040UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL2SSCGR_MODPER_7 (0x0080UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL2SSCGR_MODPER_8 (0x0100UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL2SSCGR_MODPER_9 (0x0200UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL2SSCGR_MODPER_10 (0x0400UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL2SSCGR_MODPER_11 (0x0800UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL2SSCGR_MODPER_12 (0x1000UL << RCC_PLL2SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL2SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL2SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL2SSCGR_TPDFNDIS RCC_PLL2SSCGR_TPDFNDIS_Msk +#define RCC_PLL2SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL2SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL2SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL2SSCGR_RPDFNDIS RCC_PLL2SSCGR_RPDFNDIS_Msk +#define RCC_PLL2SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL2SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL2SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL2SSCGR_SPREADSEL RCC_PLL2SSCGR_SPREADSEL_Msk +#define RCC_PLL2SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL2SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL2SSCGR_INCSTEP RCC_PLL2SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL2SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL2SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL2SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL2SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL2SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL2SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL2SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL2SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL2SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL2SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL2SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL2SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL2SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL2SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL2SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL2SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLL3SSCGR register *************/ +#define RCC_PLL3SSCGR_MODPER_Pos (0U) +#define RCC_PLL3SSCGR_MODPER_Msk (0x1FFFUL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001FFF */ +#define RCC_PLL3SSCGR_MODPER RCC_PLL3SSCGR_MODPER_Msk /*!< MODPER[12:0] bits: Modulation Period Adjustment */ +#define RCC_PLL3SSCGR_MODPER_0 (0x0001UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000001 */ +#define RCC_PLL3SSCGR_MODPER_1 (0x0002UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000002 */ +#define RCC_PLL3SSCGR_MODPER_2 (0x0004UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000004 */ +#define RCC_PLL3SSCGR_MODPER_3 (0x0008UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000008 */ +#define RCC_PLL3SSCGR_MODPER_4 (0x0010UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000010 */ +#define RCC_PLL3SSCGR_MODPER_5 (0x0020UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000020 */ +#define RCC_PLL3SSCGR_MODPER_6 (0x0040UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000040 */ +#define RCC_PLL3SSCGR_MODPER_7 (0x0080UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000080 */ +#define RCC_PLL3SSCGR_MODPER_8 (0x0100UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000100 */ +#define RCC_PLL3SSCGR_MODPER_9 (0x0200UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000200 */ +#define RCC_PLL3SSCGR_MODPER_10 (0x0400UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000400 */ +#define RCC_PLL3SSCGR_MODPER_11 (0x0800UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00000800 */ +#define RCC_PLL3SSCGR_MODPER_12 (0x1000UL << RCC_PLL3SSCGR_MODPER_Pos) /*!< 0x00001000 */ +#define RCC_PLL3SSCGR_TPDFNDIS_Pos (13U) +#define RCC_PLL3SSCGR_TPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_TPDFNDIS_Pos) /*!< 0x00002000 */ +#define RCC_PLL3SSCGR_TPDFNDIS RCC_PLL3SSCGR_TPDFNDIS_Msk +#define RCC_PLL3SSCGR_RPDFNDIS_Pos (14U) +#define RCC_PLL3SSCGR_RPDFNDIS_Msk (0x1UL << RCC_PLL3SSCGR_RPDFNDIS_Pos) /*!< 0x00004000 */ +#define RCC_PLL3SSCGR_RPDFNDIS RCC_PLL3SSCGR_RPDFNDIS_Msk +#define RCC_PLL3SSCGR_SPREADSEL_Pos (15U) +#define RCC_PLL3SSCGR_SPREADSEL_Msk (0x1UL << RCC_PLL3SSCGR_SPREADSEL_Pos) /*!< 0x00008000 */ +#define RCC_PLL3SSCGR_SPREADSEL RCC_PLL3SSCGR_SPREADSEL_Msk +#define RCC_PLL3SSCGR_INCSTEP_Pos (16U) +#define RCC_PLL3SSCGR_INCSTEP_Msk (0x7FFFUL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x7FFF0000 */ +#define RCC_PLL3SSCGR_INCSTEP RCC_PLL3SSCGR_INCSTEP_Msk /*!< INCSTEP[14:0] bits: Modulation Depth Adjustment */ +#define RCC_PLL3SSCGR_INCSTEP_0 (0x0001UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00010000 */ +#define RCC_PLL3SSCGR_INCSTEP_1 (0x0002UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00020000 */ +#define RCC_PLL3SSCGR_INCSTEP_2 (0x0004UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00040000 */ +#define RCC_PLL3SSCGR_INCSTEP_3 (0x0008UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00080000 */ +#define RCC_PLL3SSCGR_INCSTEP_4 (0x0010UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00100000 */ +#define RCC_PLL3SSCGR_INCSTEP_5 (0x0020UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00200000 */ +#define RCC_PLL3SSCGR_INCSTEP_6 (0x0040UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00400000 */ +#define RCC_PLL3SSCGR_INCSTEP_7 (0x0080UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x00800000 */ +#define RCC_PLL3SSCGR_INCSTEP_8 (0x0100UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x01000000 */ +#define RCC_PLL3SSCGR_INCSTEP_9 (0x0200UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x02000000 */ +#define RCC_PLL3SSCGR_INCSTEP_10 (0x0400UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x04000000 */ +#define RCC_PLL3SSCGR_INCSTEP_11 (0x0800UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x08000000 */ +#define RCC_PLL3SSCGR_INCSTEP_12 (0x1000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x10000000 */ +#define RCC_PLL3SSCGR_INCSTEP_13 (0x2000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x20000000 */ +#define RCC_PLL3SSCGR_INCSTEP_14 (0x4000UL << RCC_PLL3SSCGR_INCSTEP_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CKPROTR register ***************/ +#define RCC_CKPROTR_XSPICKP_Pos (0U) +#define RCC_CKPROTR_XSPICKP_Msk (0x1UL << RCC_CKPROTR_XSPICKP_Pos) /*!< 0x00000001 */ +#define RCC_CKPROTR_XSPICKP RCC_CKPROTR_XSPICKP_Msk +#define RCC_CKPROTR_FMCCKP_Pos (1U) +#define RCC_CKPROTR_FMCCKP_Msk (0x1UL << RCC_CKPROTR_FMCCKP_Pos) /*!< 0x00000002 */ +#define RCC_CKPROTR_FMCCKP RCC_CKPROTR_FMCCKP_Msk +#define RCC_CKPROTR_XSPI1SWP_Pos (4U) +#define RCC_CKPROTR_XSPI1SWP_Msk (0x7UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000070 */ +#define RCC_CKPROTR_XSPI1SWP RCC_CKPROTR_XSPI1SWP_Msk +#define RCC_CKPROTR_XSPI1SWP_0 (0x1UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000010 */ +#define RCC_CKPROTR_XSPI1SWP_1 (0x2UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000020 */ +#define RCC_CKPROTR_XSPI1SWP_2 (0x4UL << RCC_CKPROTR_XSPI1SWP_Pos) /*!< 0x00000040 */ +#define RCC_CKPROTR_XSPI2SWP_Pos (8U) +#define RCC_CKPROTR_XSPI2SWP_Msk (0x7UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000700 */ +#define RCC_CKPROTR_XSPI2SWP RCC_CKPROTR_XSPI2SWP_Msk +#define RCC_CKPROTR_XSPI2SWP_0 (0x1UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000100 */ +#define RCC_CKPROTR_XSPI2SWP_1 (0x2UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000200 */ +#define RCC_CKPROTR_XSPI2SWP_2 (0x4UL << RCC_CKPROTR_XSPI2SWP_Pos) /*!< 0x00000400 */ +#define RCC_CKPROTR_FMCSWP_Pos (12U) +#define RCC_CKPROTR_FMCSWP_Msk (0x7UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00007000 */ +#define RCC_CKPROTR_FMCSWP RCC_CKPROTR_FMCSWP_Msk +#define RCC_CKPROTR_FMCSWP_0 (0x1UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00001000 */ +#define RCC_CKPROTR_FMCSWP_1 (0x2UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00002000 */ +#define RCC_CKPROTR_FMCSWP_2 (0x4UL << RCC_CKPROTR_FMCSWP_Pos) /*!< 0x00004000 */ + +/******************** Bit definition for RCC_RSR register *******************/ +#define RCC_RSR_RMVF_Pos (16U) +#define RCC_RSR_RMVF_Msk (0x1UL << RCC_RSR_RMVF_Pos) /*!< 0x00010000 */ +#define RCC_RSR_RMVF RCC_RSR_RMVF_Msk +#define RCC_RSR_OBLRSTF_Pos (17U) +#define RCC_RSR_OBLRSTF_Msk (0x1UL << RCC_RSR_OBLRSTF_Pos) /*!< 0x00020000 */ +#define RCC_RSR_OBLRSTF RCC_RSR_OBLRSTF_Msk +#define RCC_RSR_BORRSTF_Pos (21U) +#define RCC_RSR_BORRSTF_Msk (0x1UL << RCC_RSR_BORRSTF_Pos) /*!< 0x00200000 */ +#define RCC_RSR_BORRSTF RCC_RSR_BORRSTF_Msk +#define RCC_RSR_PINRSTF_Pos (22U) +#define RCC_RSR_PINRSTF_Msk (0x1UL << RCC_RSR_PINRSTF_Pos) /*!< 0x00400000 */ +#define RCC_RSR_PINRSTF RCC_RSR_PINRSTF_Msk +#define RCC_RSR_PORRSTF_Pos (23U) +#define RCC_RSR_PORRSTF_Msk (0x1UL << RCC_RSR_PORRSTF_Pos) /*!< 0x00800000 */ +#define RCC_RSR_PORRSTF RCC_RSR_PORRSTF_Msk +#define RCC_RSR_SFTRSTF_Pos (24U) +#define RCC_RSR_SFTRSTF_Msk (0x1UL << RCC_RSR_SFTRSTF_Pos) /*!< 0x01000000 */ +#define RCC_RSR_SFTRSTF RCC_RSR_SFTRSTF_Msk +#define RCC_RSR_IWDGRSTF_Pos (26U) +#define RCC_RSR_IWDGRSTF_Msk (0x1UL << RCC_RSR_IWDGRSTF_Pos) /*!< 0x04000000 */ +#define RCC_RSR_IWDGRSTF RCC_RSR_IWDGRSTF_Msk +#define RCC_RSR_WWDGRSTF_Pos (28U) +#define RCC_RSR_WWDGRSTF_Msk (0x1UL << RCC_RSR_WWDGRSTF_Pos) /*!< 0x10000000 */ +#define RCC_RSR_WWDGRSTF RCC_RSR_WWDGRSTF_Msk +#define RCC_RSR_LPWRRSTF_Pos (30U) +#define RCC_RSR_LPWRRSTF_Msk (0x1UL << RCC_RSR_LPWRRSTF_Pos) /*!< 0x40000000 */ +#define RCC_RSR_LPWRRSTF RCC_RSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_AHB1ENR register ***************/ +#define RCC_AHB1ENR_GPDMA1EN_Pos (4U) +#define RCC_AHB1ENR_GPDMA1EN_Msk (0x1UL << RCC_AHB1ENR_GPDMA1EN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1ENR_GPDMA1EN RCC_AHB1ENR_GPDMA1EN_Msk +#define RCC_AHB1ENR_ADC12EN_Pos (5U) +#define RCC_AHB1ENR_ADC12EN_Msk (0x1UL << RCC_AHB1ENR_ADC12EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1ENR_ADC12EN RCC_AHB1ENR_ADC12EN_Msk +#define RCC_AHB1ENR_ETH1MACEN_Pos (15U) +#define RCC_AHB1ENR_ETH1MACEN_Msk (0x1UL << RCC_AHB1ENR_ETH1MACEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1ENR_ETH1MACEN RCC_AHB1ENR_ETH1MACEN_Msk +#define RCC_AHB1ENR_ETH1TXEN_Pos (16U) +#define RCC_AHB1ENR_ETH1TXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1TXEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_ETH1TXEN RCC_AHB1ENR_ETH1TXEN_Msk +#define RCC_AHB1ENR_ETH1RXEN_Pos (17U) +#define RCC_AHB1ENR_ETH1RXEN_Msk (0x1UL << RCC_AHB1ENR_ETH1RXEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1ENR_ETH1RXEN RCC_AHB1ENR_ETH1RXEN_Msk +#define RCC_AHB1ENR_OTGHSEN_Pos (25U) +#define RCC_AHB1ENR_OTGHSEN_Msk (0x1UL << RCC_AHB1ENR_OTGHSEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1ENR_OTGHSEN RCC_AHB1ENR_OTGHSEN_Msk +#define RCC_AHB1ENR_USBPHYCEN_Pos (26U) +#define RCC_AHB1ENR_USBPHYCEN_Msk (0x1UL << RCC_AHB1ENR_USBPHYCEN_Pos) /*!< 0x04000000 */ +#define RCC_AHB1ENR_USBPHYCEN RCC_AHB1ENR_USBPHYCEN_Msk +#define RCC_AHB1ENR_OTGFSEN_Pos (27U) +#define RCC_AHB1ENR_OTGFSEN_Msk (0x1UL << RCC_AHB1ENR_OTGFSEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1ENR_OTGFSEN RCC_AHB1ENR_OTGFSEN_Msk +#define RCC_AHB1ENR_ADF1EN_Pos (31U) +#define RCC_AHB1ENR_ADF1EN_Msk (0x1UL << RCC_AHB1ENR_ADF1EN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1ENR_ADF1EN RCC_AHB1ENR_ADF1EN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_PSSIEN_Pos (1U) +#define RCC_AHB2ENR_PSSIEN_Msk (0x1UL << RCC_AHB2ENR_PSSIEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_PSSIEN RCC_AHB2ENR_PSSIEN_Msk +#define RCC_AHB2ENR_SDMMC2EN_Pos (9U) +#define RCC_AHB2ENR_SDMMC2EN_Msk (0x1UL << RCC_AHB2ENR_SDMMC2EN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2ENR_SDMMC2EN RCC_AHB2ENR_SDMMC2EN_Msk +#define RCC_AHB2ENR_CORDICEN_Pos (14U) +#define RCC_AHB2ENR_CORDICEN_Msk (0x1UL << RCC_AHB2ENR_CORDICEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2ENR_CORDICEN RCC_AHB2ENR_CORDICEN_Msk +#define RCC_AHB2ENR_SRAM1EN_Pos (29U) +#define RCC_AHB2ENR_SRAM1EN_Msk (0x1UL << RCC_AHB2ENR_SRAM1EN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2ENR_SRAM1EN RCC_AHB2ENR_SRAM1EN_Msk +#define RCC_AHB2ENR_SRAM2EN_Pos (30U) +#define RCC_AHB2ENR_SRAM2EN_Msk (0x1UL << RCC_AHB2ENR_SRAM2EN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2ENR_SRAM2EN RCC_AHB2ENR_SRAM2EN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_RNGEN_Pos (0U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HASHEN_Pos (1U) +#define RCC_AHB3ENR_HASHEN_Msk (0x1UL << RCC_AHB3ENR_HASHEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3ENR_HASHEN RCC_AHB3ENR_HASHEN_Msk +#define RCC_AHB3ENR_CRYPEN_Pos (2U) +#define RCC_AHB3ENR_CRYPEN_Msk (0x1UL << RCC_AHB3ENR_CRYPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB3ENR_CRYPEN RCC_AHB3ENR_CRYPEN_Msk +#define RCC_AHB3ENR_SAESEN_Pos (4U) +#define RCC_AHB3ENR_SAESEN_Msk (0x1UL << RCC_AHB3ENR_SAESEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB3ENR_SAESEN RCC_AHB3ENR_SAESEN_Msk +#define RCC_AHB3ENR_PKAEN_Pos (6U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk + +/******************** Bit definition for RCC_AHB4ENR register ***************/ +#define RCC_AHB4ENR_GPIOAEN_Pos (0U) +#define RCC_AHB4ENR_GPIOAEN_Msk (0x1UL << RCC_AHB4ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4ENR_GPIOAEN RCC_AHB4ENR_GPIOAEN_Msk +#define RCC_AHB4ENR_GPIOBEN_Pos (1U) +#define RCC_AHB4ENR_GPIOBEN_Msk (0x1UL << RCC_AHB4ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4ENR_GPIOBEN RCC_AHB4ENR_GPIOBEN_Msk +#define RCC_AHB4ENR_GPIOCEN_Pos (2U) +#define RCC_AHB4ENR_GPIOCEN_Msk (0x1UL << RCC_AHB4ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4ENR_GPIOCEN RCC_AHB4ENR_GPIOCEN_Msk +#define RCC_AHB4ENR_GPIODEN_Pos (3U) +#define RCC_AHB4ENR_GPIODEN_Msk (0x1UL << RCC_AHB4ENR_GPIODEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4ENR_GPIODEN RCC_AHB4ENR_GPIODEN_Msk +#define RCC_AHB4ENR_GPIOEEN_Pos (4U) +#define RCC_AHB4ENR_GPIOEEN_Msk (0x1UL << RCC_AHB4ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4ENR_GPIOEEN RCC_AHB4ENR_GPIOEEN_Msk +#define RCC_AHB4ENR_GPIOFEN_Pos (5U) +#define RCC_AHB4ENR_GPIOFEN_Msk (0x1UL << RCC_AHB4ENR_GPIOFEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4ENR_GPIOFEN RCC_AHB4ENR_GPIOFEN_Msk +#define RCC_AHB4ENR_GPIOGEN_Pos (6U) +#define RCC_AHB4ENR_GPIOGEN_Msk (0x1UL << RCC_AHB4ENR_GPIOGEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4ENR_GPIOGEN RCC_AHB4ENR_GPIOGEN_Msk +#define RCC_AHB4ENR_GPIOHEN_Pos (7U) +#define RCC_AHB4ENR_GPIOHEN_Msk (0x1UL << RCC_AHB4ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4ENR_GPIOHEN RCC_AHB4ENR_GPIOHEN_Msk +#define RCC_AHB4ENR_GPIOMEN_Pos (12U) +#define RCC_AHB4ENR_GPIOMEN_Msk (0x1UL << RCC_AHB4ENR_GPIOMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4ENR_GPIOMEN RCC_AHB4ENR_GPIOMEN_Msk +#define RCC_AHB4ENR_GPIONEN_Pos (13U) +#define RCC_AHB4ENR_GPIONEN_Msk (0x1UL << RCC_AHB4ENR_GPIONEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4ENR_GPIONEN RCC_AHB4ENR_GPIONEN_Msk +#define RCC_AHB4ENR_GPIOOEN_Pos (14U) +#define RCC_AHB4ENR_GPIOOEN_Msk (0x1UL << RCC_AHB4ENR_GPIOOEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4ENR_GPIOOEN RCC_AHB4ENR_GPIOOEN_Msk +#define RCC_AHB4ENR_GPIOPEN_Pos (15U) +#define RCC_AHB4ENR_GPIOPEN_Msk (0x1UL << RCC_AHB4ENR_GPIOPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4ENR_GPIOPEN RCC_AHB4ENR_GPIOPEN_Msk +#define RCC_AHB4ENR_CRCEN_Pos (19U) +#define RCC_AHB4ENR_CRCEN_Msk (0x1UL << RCC_AHB4ENR_CRCEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4ENR_CRCEN RCC_AHB4ENR_CRCEN_Msk +#define RCC_AHB4ENR_BKPRAMEN_Pos (28U) +#define RCC_AHB4ENR_BKPRAMEN_Msk (0x1UL << RCC_AHB4ENR_BKPRAMEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4ENR_BKPRAMEN RCC_AHB4ENR_BKPRAMEN_Msk + +/******************** Bit definition for RCC_AHB5ENR register ***************/ +#define RCC_AHB5ENR_HPDMA1EN_Pos (0U) +#define RCC_AHB5ENR_HPDMA1EN_Msk (0x1UL << RCC_AHB5ENR_HPDMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5ENR_HPDMA1EN RCC_AHB5ENR_HPDMA1EN_Msk +#define RCC_AHB5ENR_DMA2DEN_Pos (1U) +#define RCC_AHB5ENR_DMA2DEN_Msk (0x1UL << RCC_AHB5ENR_DMA2DEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5ENR_DMA2DEN RCC_AHB5ENR_DMA2DEN_Msk +#define RCC_AHB5ENR_JPEGEN_Pos (3U) +#define RCC_AHB5ENR_JPEGEN_Msk (0x1UL << RCC_AHB5ENR_JPEGEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5ENR_JPEGEN RCC_AHB5ENR_JPEGEN_Msk +#define RCC_AHB5ENR_FMCEN_Pos (4U) +#define RCC_AHB5ENR_FMCEN_Msk (0x1UL << RCC_AHB5ENR_FMCEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5ENR_FMCEN RCC_AHB5ENR_FMCEN_Msk +#define RCC_AHB5ENR_XSPI1EN_Pos (5U) +#define RCC_AHB5ENR_XSPI1EN_Msk (0x1UL << RCC_AHB5ENR_XSPI1EN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5ENR_XSPI1EN RCC_AHB5ENR_XSPI1EN_Msk +#define RCC_AHB5ENR_SDMMC1EN_Pos (8U) +#define RCC_AHB5ENR_SDMMC1EN_Msk (0x1UL << RCC_AHB5ENR_SDMMC1EN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5ENR_SDMMC1EN RCC_AHB5ENR_SDMMC1EN_Msk +#define RCC_AHB5ENR_XSPI2EN_Pos (12U) +#define RCC_AHB5ENR_XSPI2EN_Msk (0x1UL << RCC_AHB5ENR_XSPI2EN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5ENR_XSPI2EN RCC_AHB5ENR_XSPI2EN_Msk +#define RCC_AHB5ENR_XSPIMEN_Pos (14U) +#define RCC_AHB5ENR_XSPIMEN_Msk (0x1UL << RCC_AHB5ENR_XSPIMEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5ENR_XSPIMEN RCC_AHB5ENR_XSPIMEN_Msk +#define RCC_AHB5ENR_GFXMMUEN_Pos (19U) +#define RCC_AHB5ENR_GFXMMUEN_Msk (0x1UL << RCC_AHB5ENR_GFXMMUEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5ENR_GFXMMUEN RCC_AHB5ENR_GFXMMUEN_Msk +#define RCC_AHB5ENR_GPU2DEN_Pos (20U) +#define RCC_AHB5ENR_GPU2DEN_Msk (0x1UL << RCC_AHB5ENR_GPU2DEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB5ENR_GPU2DEN RCC_AHB5ENR_GPU2DEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_TIM3EN_Pos (1U) +#define RCC_APB1ENR1_TIM3EN_Msk (0x1UL << RCC_APB1ENR1_TIM3EN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR1_TIM3EN RCC_APB1ENR1_TIM3EN_Msk +#define RCC_APB1ENR1_TIM4EN_Pos (2U) +#define RCC_APB1ENR1_TIM4EN_Msk (0x1UL << RCC_APB1ENR1_TIM4EN_Pos) /*!< 0x00000004 */ +#define RCC_APB1ENR1_TIM4EN RCC_APB1ENR1_TIM4EN_Msk +#define RCC_APB1ENR1_TIM5EN_Pos (3U) +#define RCC_APB1ENR1_TIM5EN_Msk (0x1UL << RCC_APB1ENR1_TIM5EN_Pos) /*!< 0x00000008 */ +#define RCC_APB1ENR1_TIM5EN RCC_APB1ENR1_TIM5EN_Msk +#define RCC_APB1ENR1_TIM6EN_Pos (4U) +#define RCC_APB1ENR1_TIM6EN_Msk (0x1UL << RCC_APB1ENR1_TIM6EN_Pos) /*!< 0x00000010 */ +#define RCC_APB1ENR1_TIM6EN RCC_APB1ENR1_TIM6EN_Msk +#define RCC_APB1ENR1_TIM7EN_Pos (5U) +#define RCC_APB1ENR1_TIM7EN_Msk (0x1UL << RCC_APB1ENR1_TIM7EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR1_TIM7EN RCC_APB1ENR1_TIM7EN_Msk +#define RCC_APB1ENR1_TIM12EN_Pos (6U) +#define RCC_APB1ENR1_TIM12EN_Msk (0x1UL << RCC_APB1ENR1_TIM12EN_Pos) /*!< 0x00000040 */ +#define RCC_APB1ENR1_TIM12EN RCC_APB1ENR1_TIM12EN_Msk +#define RCC_APB1ENR1_TIM13EN_Pos (7U) +#define RCC_APB1ENR1_TIM13EN_Msk (0x1UL << RCC_APB1ENR1_TIM13EN_Pos) /*!< 0x00000080 */ +#define RCC_APB1ENR1_TIM13EN RCC_APB1ENR1_TIM13EN_Msk +#define RCC_APB1ENR1_TIM14EN_Pos (8U) +#define RCC_APB1ENR1_TIM14EN_Msk (0x1UL << RCC_APB1ENR1_TIM14EN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR1_TIM14EN RCC_APB1ENR1_TIM14EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (9U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x00000200 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_SPI2EN_Pos (14U) +#define RCC_APB1ENR1_SPI2EN_Msk (0x1UL << RCC_APB1ENR1_SPI2EN_Pos) /*!< 0x00004000 */ +#define RCC_APB1ENR1_SPI2EN RCC_APB1ENR1_SPI2EN_Msk +#define RCC_APB1ENR1_SPI3EN_Pos (15U) +#define RCC_APB1ENR1_SPI3EN_Msk (0x1UL << RCC_APB1ENR1_SPI3EN_Pos) /*!< 0x00008000 */ +#define RCC_APB1ENR1_SPI3EN RCC_APB1ENR1_SPI3EN_Msk +#define RCC_APB1ENR1_SPDIFRXEN_Pos (16U) +#define RCC_APB1ENR1_SPDIFRXEN_Msk (0x1UL << RCC_APB1ENR1_SPDIFRXEN_Pos) /*!< 0x00010000 */ +#define RCC_APB1ENR1_SPDIFRXEN RCC_APB1ENR1_SPDIFRXEN_Msk +#define RCC_APB1ENR1_USART2EN_Pos (17U) +#define RCC_APB1ENR1_USART2EN_Msk (0x1UL << RCC_APB1ENR1_USART2EN_Pos) /*!< 0x00020000 */ +#define RCC_APB1ENR1_USART2EN RCC_APB1ENR1_USART2EN_Msk +#define RCC_APB1ENR1_USART3EN_Pos (18U) +#define RCC_APB1ENR1_USART3EN_Msk (0x1UL << RCC_APB1ENR1_USART3EN_Pos) /*!< 0x00040000 */ +#define RCC_APB1ENR1_USART3EN RCC_APB1ENR1_USART3EN_Msk +#define RCC_APB1ENR1_UART4EN_Pos (19U) +#define RCC_APB1ENR1_UART4EN_Msk (0x1UL << RCC_APB1ENR1_UART4EN_Pos) /*!< 0x00080000 */ +#define RCC_APB1ENR1_UART4EN RCC_APB1ENR1_UART4EN_Msk +#define RCC_APB1ENR1_UART5EN_Pos (20U) +#define RCC_APB1ENR1_UART5EN_Msk (0x1UL << RCC_APB1ENR1_UART5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB1ENR1_UART5EN RCC_APB1ENR1_UART5EN_Msk +#define RCC_APB1ENR1_I2C1_I3C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1_I3C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1_I3C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1_I3C1EN RCC_APB1ENR1_I2C1_I3C1EN_Msk +#define RCC_APB1ENR1_I2C2EN_Pos (22U) +#define RCC_APB1ENR1_I2C2EN_Msk (0x1UL << RCC_APB1ENR1_I2C2EN_Pos) /*!< 0x00400000 */ +#define RCC_APB1ENR1_I2C2EN RCC_APB1ENR1_I2C2EN_Msk +#define RCC_APB1ENR1_I2C3EN_Pos (23U) +#define RCC_APB1ENR1_I2C3EN_Msk (0x1UL << RCC_APB1ENR1_I2C3EN_Pos) /*!< 0x00800000 */ +#define RCC_APB1ENR1_I2C3EN RCC_APB1ENR1_I2C3EN_Msk +#define RCC_APB1ENR1_CECEN_Pos (27U) +#define RCC_APB1ENR1_CECEN_Msk (0x1UL << RCC_APB1ENR1_CECEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR1_CECEN RCC_APB1ENR1_CECEN_Msk +#define RCC_APB1ENR1_UART7EN_Pos (30U) +#define RCC_APB1ENR1_UART7EN_Msk (0x1UL << RCC_APB1ENR1_UART7EN_Pos) /*!< 0x40000000 */ +#define RCC_APB1ENR1_UART7EN RCC_APB1ENR1_UART7EN_Msk +#define RCC_APB1ENR1_UART8EN_Pos (31U) +#define RCC_APB1ENR1_UART8EN_Msk (0x1UL << RCC_APB1ENR1_UART8EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_UART8EN RCC_APB1ENR1_UART8EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_CRSEN_Pos (1U) +#define RCC_APB1ENR2_CRSEN_Msk (0x1UL << RCC_APB1ENR2_CRSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1ENR2_CRSEN RCC_APB1ENR2_CRSEN_Msk +#define RCC_APB1ENR2_MDIOSEN_Pos (5U) +#define RCC_APB1ENR2_MDIOSEN_Msk (0x1UL << RCC_APB1ENR2_MDIOSEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_MDIOSEN RCC_APB1ENR2_MDIOSEN_Msk +#define RCC_APB1ENR2_FDCANEN_Pos (8U) +#define RCC_APB1ENR2_FDCANEN_Msk (0x1UL << RCC_APB1ENR2_FDCANEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1ENR2_FDCANEN RCC_APB1ENR2_FDCANEN_Msk +#define RCC_APB1ENR2_UCPD1EN_Pos (27U) +#define RCC_APB1ENR2_UCPD1EN_Msk (0x1UL << RCC_APB1ENR2_UCPD1EN_Pos) /*!< 0x08000000 */ +#define RCC_APB1ENR2_UCPD1EN RCC_APB1ENR2_UCPD1EN_Msk + +/******************** Bit definition for RCC_APB2ENR register ***************/ +#define RCC_APB2ENR_TIM1EN_Pos (0U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000001 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (4U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00000010 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_SPI4EN_Pos (13U) +#define RCC_APB2ENR_SPI4EN_Msk (0x1UL << RCC_APB2ENR_SPI4EN_Pos) /*!< 0x00002000 */ +#define RCC_APB2ENR_SPI4EN RCC_APB2ENR_SPI4EN_Msk +#define RCC_APB2ENR_TIM15EN_Pos (16U) +#define RCC_APB2ENR_TIM15EN_Msk (0x1UL << RCC_APB2ENR_TIM15EN_Pos) /*!< 0x00010000 */ +#define RCC_APB2ENR_TIM15EN RCC_APB2ENR_TIM15EN_Msk +#define RCC_APB2ENR_TIM16EN_Pos (17U) +#define RCC_APB2ENR_TIM16EN_Msk (0x1UL << RCC_APB2ENR_TIM16EN_Pos) /*!< 0x00020000 */ +#define RCC_APB2ENR_TIM16EN RCC_APB2ENR_TIM16EN_Msk +#define RCC_APB2ENR_TIM17EN_Pos (18U) +#define RCC_APB2ENR_TIM17EN_Msk (0x1UL << RCC_APB2ENR_TIM17EN_Pos) /*!< 0x00040000 */ +#define RCC_APB2ENR_TIM17EN RCC_APB2ENR_TIM17EN_Msk +#define RCC_APB2ENR_TIM9EN_Pos (19U) +#define RCC_APB2ENR_TIM9EN_Msk (0x1UL << RCC_APB2ENR_TIM9EN_Pos) /*!< 0x00080000 */ +#define RCC_APB2ENR_TIM9EN RCC_APB2ENR_TIM9EN_Msk +#define RCC_APB2ENR_SPI5EN_Pos (20U) +#define RCC_APB2ENR_SPI5EN_Msk (0x1UL << RCC_APB2ENR_SPI5EN_Pos) /*!< 0x00100000 */ +#define RCC_APB2ENR_SPI5EN RCC_APB2ENR_SPI5EN_Msk +#define RCC_APB2ENR_SAI1EN_Pos (22U) +#define RCC_APB2ENR_SAI1EN_Msk (0x1UL << RCC_APB2ENR_SAI1EN_Pos) /*!< 0x00400000 */ +#define RCC_APB2ENR_SAI1EN RCC_APB2ENR_SAI1EN_Msk +#define RCC_APB2ENR_SAI2EN_Pos (23U) +#define RCC_APB2ENR_SAI2EN_Msk (0x1UL << RCC_APB2ENR_SAI2EN_Pos) /*!< 0x00800000 */ +#define RCC_APB2ENR_SAI2EN RCC_APB2ENR_SAI2EN_Msk + +/******************** Bit definition for RCC_APB4ENR register ***************/ +#define RCC_APB4ENR_SBSEN_Pos (1U) +#define RCC_APB4ENR_SBSEN_Msk (0x1UL << RCC_APB4ENR_SBSEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4ENR_SBSEN RCC_APB4ENR_SBSEN_Msk +#define RCC_APB4ENR_LPUART1EN_Pos (3U) +#define RCC_APB4ENR_LPUART1EN_Msk (0x1UL << RCC_APB4ENR_LPUART1EN_Pos) /*!< 0x00000008 */ +#define RCC_APB4ENR_LPUART1EN RCC_APB4ENR_LPUART1EN_Msk +#define RCC_APB4ENR_SPI6EN_Pos (5U) +#define RCC_APB4ENR_SPI6EN_Msk (0x1UL << RCC_APB4ENR_SPI6EN_Pos) /*!< 0x00000020 */ +#define RCC_APB4ENR_SPI6EN RCC_APB4ENR_SPI6EN_Msk +#define RCC_APB4ENR_LPTIM2EN_Pos (9U) +#define RCC_APB4ENR_LPTIM2EN_Msk (0x1UL << RCC_APB4ENR_LPTIM2EN_Pos) /*!< 0x00000200 */ +#define RCC_APB4ENR_LPTIM2EN RCC_APB4ENR_LPTIM2EN_Msk +#define RCC_APB4ENR_LPTIM3EN_Pos (10U) +#define RCC_APB4ENR_LPTIM3EN_Msk (0x1UL << RCC_APB4ENR_LPTIM3EN_Pos) /*!< 0x00000400 */ +#define RCC_APB4ENR_LPTIM3EN RCC_APB4ENR_LPTIM3EN_Msk +#define RCC_APB4ENR_LPTIM4EN_Pos (11U) +#define RCC_APB4ENR_LPTIM4EN_Msk (0x1UL << RCC_APB4ENR_LPTIM4EN_Pos) /*!< 0x00000800 */ +#define RCC_APB4ENR_LPTIM4EN RCC_APB4ENR_LPTIM4EN_Msk +#define RCC_APB4ENR_LPTIM5EN_Pos (12U) +#define RCC_APB4ENR_LPTIM5EN_Msk (0x1UL << RCC_APB4ENR_LPTIM5EN_Pos) /*!< 0x00001000 */ +#define RCC_APB4ENR_LPTIM5EN RCC_APB4ENR_LPTIM5EN_Msk +#define RCC_APB4ENR_VREFEN_Pos (15U) +#define RCC_APB4ENR_VREFEN_Msk (0x1UL << RCC_APB4ENR_VREFEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4ENR_VREFEN RCC_APB4ENR_VREFEN_Msk +#define RCC_APB4ENR_RTCAPBEN_Pos (16U) +#define RCC_APB4ENR_RTCAPBEN_Msk (0x1UL << RCC_APB4ENR_RTCAPBEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4ENR_RTCAPBEN RCC_APB4ENR_RTCAPBEN_Msk +#define RCC_APB4ENR_DTSEN_Pos (26U) +#define RCC_APB4ENR_DTSEN_Msk (0x1UL << RCC_APB4ENR_DTSEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4ENR_DTSEN RCC_APB4ENR_DTSEN_Msk + +/******************** Bit definition for RCC_APB5ENR register ***************/ +#define RCC_APB5ENR_LTDCEN_Pos (1U) +#define RCC_APB5ENR_LTDCEN_Msk (0x1UL << RCC_APB5ENR_LTDCEN_Pos) /*!< 0x00000002 */ +#define RCC_APB5ENR_LTDCEN RCC_APB5ENR_LTDCEN_Msk +#define RCC_APB5ENR_DCMIPPEN_Pos (2U) +#define RCC_APB5ENR_DCMIPPEN_Msk (0x1UL << RCC_APB5ENR_DCMIPPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5ENR_DCMIPPEN RCC_APB5ENR_DCMIPPEN_Msk +#define RCC_APB5ENR_GFXTIMEN_Pos (4U) +#define RCC_APB5ENR_GFXTIMEN_Msk (0x1UL << RCC_APB5ENR_GFXTIMEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5ENR_GFXTIMEN RCC_APB5ENR_GFXTIMEN_Msk + +/******************** Bit definition for RCC_AHB1LPENR register *************/ +#define RCC_AHB1LPENR_GPDMA1LPEN_Pos (4U) +#define RCC_AHB1LPENR_GPDMA1LPEN_Msk (0x1UL << RCC_AHB1LPENR_GPDMA1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB1LPENR_GPDMA1LPEN RCC_AHB1LPENR_GPDMA1LPEN_Msk +#define RCC_AHB1LPENR_ADC12LPEN_Pos (5U) +#define RCC_AHB1LPENR_ADC12LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADC12LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB1LPENR_ADC12LPEN RCC_AHB1LPENR_ADC12LPEN_Msk +#define RCC_AHB1LPENR_ETH1MACLPEN_Pos (15U) +#define RCC_AHB1LPENR_ETH1MACLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1MACLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB1LPENR_ETH1MACLPEN RCC_AHB1LPENR_ETH1MACLPEN_Msk +#define RCC_AHB1LPENR_ETH1TXLPEN_Pos (16U) +#define RCC_AHB1LPENR_ETH1TXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1TXLPEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1LPENR_ETH1TXLPEN RCC_AHB1LPENR_ETH1TXLPEN_Msk +#define RCC_AHB1LPENR_ETH1RXLPEN_Pos (17U) +#define RCC_AHB1LPENR_ETH1RXLPEN_Msk (0x1UL << RCC_AHB1LPENR_ETH1RXLPEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB1LPENR_ETH1RXLPEN RCC_AHB1LPENR_ETH1RXLPEN_Msk +#define RCC_AHB1LPENR_UCPDCTRL_Pos (24U) +#define RCC_AHB1LPENR_UCPDCTRL_Msk (0x1UL << RCC_AHB1LPENR_UCPDCTRL_Pos) /*!< 0x01000000 */ +#define RCC_AHB1LPENR_UCPDCTRL RCC_AHB1LPENR_UCPDCTRL_Msk +#define RCC_AHB1LPENR_OTGHSLPEN_Pos (25U) +#define RCC_AHB1LPENR_OTGHSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGHSLPEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB1LPENR_OTGHSLPEN RCC_AHB1LPENR_OTGHSLPEN_Msk +#define RCC_AHB1LPENR_USBPHYCLPEN_Pos (26U) +#define RCC_AHB1LPENR_USBPHYCLPEN_Msk (0x1UL << RCC_AHB1LPENR_USBPHYCLPEN_Pos)/*!< 0x04000000 */ +#define RCC_AHB1LPENR_USBPHYCLPEN RCC_AHB1LPENR_USBPHYCLPEN_Msk +#define RCC_AHB1LPENR_OTGFSLPEN_Pos (27U) +#define RCC_AHB1LPENR_OTGFSLPEN_Msk (0x1UL << RCC_AHB1LPENR_OTGFSLPEN_Pos) /*!< 0x08000000 */ +#define RCC_AHB1LPENR_OTGFSLPEN RCC_AHB1LPENR_OTGFSLPEN_Msk +#define RCC_AHB1LPENR_ADF1LPEN_Pos (31U) +#define RCC_AHB1LPENR_ADF1LPEN_Msk (0x1UL << RCC_AHB1LPENR_ADF1LPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB1LPENR_ADF1LPEN RCC_AHB1LPENR_ADF1LPEN_Msk + +/******************** Bit definition for RCC_AHB2LPENR register *************/ +#define RCC_AHB2LPENR_PSSILPEN_Pos (1U) +#define RCC_AHB2LPENR_PSSILPEN_Msk (0x1UL << RCC_AHB2LPENR_PSSILPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2LPENR_PSSILPEN RCC_AHB2LPENR_PSSILPEN_Msk +#define RCC_AHB2LPENR_SDMMC2LPEN_Pos (9U) +#define RCC_AHB2LPENR_SDMMC2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SDMMC2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB2LPENR_SDMMC2LPEN RCC_AHB2LPENR_SDMMC2LPEN_Msk +#define RCC_AHB2LPENR_CORDICLPEN_Pos (14U) +#define RCC_AHB2LPENR_CORDICLPEN_Msk (0x1UL << RCC_AHB2LPENR_CORDICLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB2LPENR_CORDICLPEN RCC_AHB2LPENR_CORDICLPEN_Msk +#define RCC_AHB2LPENR_SRAM1LPEN_Pos (29U) +#define RCC_AHB2LPENR_SRAM1LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM1LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB2LPENR_SRAM1LPEN RCC_AHB2LPENR_SRAM1LPEN_Msk +#define RCC_AHB2LPENR_SRAM2LPEN_Pos (30U) +#define RCC_AHB2LPENR_SRAM2LPEN_Msk (0x1UL << RCC_AHB2LPENR_SRAM2LPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB2LPENR_SRAM2LPEN RCC_AHB2LPENR_SRAM2LPEN_Msk + +/******************** Bit definition for RCC_AHB3LPENR register *************/ +#define RCC_AHB3LPENR_RNGLPEN_Pos (0U) +#define RCC_AHB3LPENR_RNGLPEN_Msk (0x1UL << RCC_AHB3LPENR_RNGLPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB3LPENR_RNGLPEN RCC_AHB3LPENR_RNGLPEN_Msk +#define RCC_AHB3LPENR_HASHLPEN_Pos (1U) +#define RCC_AHB3LPENR_HASHLPEN_Msk (0x1UL << RCC_AHB3LPENR_HASHLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB3LPENR_HASHLPEN RCC_AHB3LPENR_HASHLPEN_Msk +#define RCC_AHB3LPENR_CRYPLPEN_Pos (2U) +#define RCC_AHB3LPENR_CRYPLPEN_Msk (0x1UL << RCC_AHB3LPENR_CRYPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB3LPENR_CRYPLPEN RCC_AHB3LPENR_CRYPLPEN_Msk +#define RCC_AHB3LPENR_SAESLPEN_Pos (4U) +#define RCC_AHB3LPENR_SAESLPEN_Msk (0x1UL << RCC_AHB3LPENR_SAESLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB3LPENR_SAESLPEN RCC_AHB3LPENR_SAESLPEN_Msk +#define RCC_AHB3LPENR_PKALPEN_Pos (6U) +#define RCC_AHB3LPENR_PKALPEN_Msk (0x1UL << RCC_AHB3LPENR_PKALPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB3LPENR_PKALPEN RCC_AHB3LPENR_PKALPEN_Msk + +/******************** Bit definition for RCC_AHB4LPENR register *************/ +#define RCC_AHB4LPENR_GPIOALPEN_Pos (0U) +#define RCC_AHB4LPENR_GPIOALPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOALPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB4LPENR_GPIOALPEN RCC_AHB4LPENR_GPIOALPEN_Msk +#define RCC_AHB4LPENR_GPIOBLPEN_Pos (1U) +#define RCC_AHB4LPENR_GPIOBLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOBLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB4LPENR_GPIOBLPEN RCC_AHB4LPENR_GPIOBLPEN_Msk +#define RCC_AHB4LPENR_GPIOCLPEN_Pos (2U) +#define RCC_AHB4LPENR_GPIOCLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOCLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB4LPENR_GPIOCLPEN RCC_AHB4LPENR_GPIOCLPEN_Msk +#define RCC_AHB4LPENR_GPIODLPEN_Pos (3U) +#define RCC_AHB4LPENR_GPIODLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIODLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB4LPENR_GPIODLPEN RCC_AHB4LPENR_GPIODLPEN_Msk +#define RCC_AHB4LPENR_GPIOELPEN_Pos (4U) +#define RCC_AHB4LPENR_GPIOELPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOELPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB4LPENR_GPIOELPEN RCC_AHB4LPENR_GPIOELPEN_Msk +#define RCC_AHB4LPENR_GPIOFLPEN_Pos (5U) +#define RCC_AHB4LPENR_GPIOFLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOFLPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB4LPENR_GPIOFLPEN RCC_AHB4LPENR_GPIOFLPEN_Msk +#define RCC_AHB4LPENR_GPIOGLPEN_Pos (6U) +#define RCC_AHB4LPENR_GPIOGLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOGLPEN_Pos) /*!< 0x00000040 */ +#define RCC_AHB4LPENR_GPIOGLPEN RCC_AHB4LPENR_GPIOGLPEN_Msk +#define RCC_AHB4LPENR_GPIOHLPEN_Pos (7U) +#define RCC_AHB4LPENR_GPIOHLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOHLPEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB4LPENR_GPIOHLPEN RCC_AHB4LPENR_GPIOHLPEN_Msk +#define RCC_AHB4LPENR_GPIOMLPEN_Pos (12U) +#define RCC_AHB4LPENR_GPIOMLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOMLPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB4LPENR_GPIOMLPEN RCC_AHB4LPENR_GPIOMLPEN_Msk +#define RCC_AHB4LPENR_GPIONLPEN_Pos (13U) +#define RCC_AHB4LPENR_GPIONLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIONLPEN_Pos) /*!< 0x00002000 */ +#define RCC_AHB4LPENR_GPIONLPEN RCC_AHB4LPENR_GPIONLPEN_Msk +#define RCC_AHB4LPENR_GPIOOLPEN_Pos (14U) +#define RCC_AHB4LPENR_GPIOOLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOOLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB4LPENR_GPIOOLPEN RCC_AHB4LPENR_GPIOOLPEN_Msk +#define RCC_AHB4LPENR_GPIOPLPEN_Pos (15U) +#define RCC_AHB4LPENR_GPIOPLPEN_Msk (0x1UL << RCC_AHB4LPENR_GPIOPLPEN_Pos) /*!< 0x00008000 */ +#define RCC_AHB4LPENR_GPIOPLPEN RCC_AHB4LPENR_GPIOPLPEN_Msk +#define RCC_AHB4LPENR_CRCLPEN_Pos (19U) +#define RCC_AHB4LPENR_CRCLPEN_Msk (0x1UL << RCC_AHB4LPENR_CRCLPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB4LPENR_CRCLPEN RCC_AHB4LPENR_CRCLPEN_Msk +#define RCC_AHB4LPENR_BKPRAMLPEN_Pos (28U) +#define RCC_AHB4LPENR_BKPRAMLPEN_Msk (0x1UL << RCC_AHB4LPENR_BKPRAMLPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB4LPENR_BKPRAMLPEN RCC_AHB4LPENR_BKPRAMLPEN_Msk + +/******************** Bit definition for RCC_AHB5LPENR register *************/ +#define RCC_AHB5LPENR_HPDMA1LPEN_Pos (0U) +#define RCC_AHB5LPENR_HPDMA1LPEN_Msk (0x1UL << RCC_AHB5LPENR_HPDMA1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB5LPENR_HPDMA1LPEN RCC_AHB5LPENR_HPDMA1LPEN_Msk +#define RCC_AHB5LPENR_DMA2DLPEN_Pos (1U) +#define RCC_AHB5LPENR_DMA2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_DMA2DLPEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB5LPENR_DMA2DLPEN RCC_AHB5LPENR_DMA2DLPEN_Msk +#define RCC_AHB5LPENR_FLASHLPEN_Pos (2U) +#define RCC_AHB5LPENR_FLASHLPEN_Msk (0x1UL << RCC_AHB5LPENR_FLASHLPEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB5LPENR_FLASHLPEN RCC_AHB5LPENR_FLASHLPEN_Msk +#define RCC_AHB5LPENR_JPEGLPEN_Pos (3U) +#define RCC_AHB5LPENR_JPEGLPEN_Msk (0x1UL << RCC_AHB5LPENR_JPEGLPEN_Pos) /*!< 0x00000008 */ +#define RCC_AHB5LPENR_JPEGLPEN RCC_AHB5LPENR_JPEGLPEN_Msk +#define RCC_AHB5LPENR_FMCLPEN_Pos (4U) +#define RCC_AHB5LPENR_FMCLPEN_Msk (0x1UL << RCC_AHB5LPENR_FMCLPEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB5LPENR_FMCLPEN RCC_AHB5LPENR_FMCLPEN_Msk +#define RCC_AHB5LPENR_XSPI1LPEN_Pos (5U) +#define RCC_AHB5LPENR_XSPI1LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI1LPEN_Pos) /*!< 0x00000020 */ +#define RCC_AHB5LPENR_XSPI1LPEN RCC_AHB5LPENR_XSPI1LPEN_Msk +#define RCC_AHB5LPENR_SDMMC1LPEN_Pos (8U) +#define RCC_AHB5LPENR_SDMMC1LPEN_Msk (0x1UL << RCC_AHB5LPENR_SDMMC1LPEN_Pos) /*!< 0x00000100 */ +#define RCC_AHB5LPENR_SDMMC1LPEN RCC_AHB5LPENR_SDMMC1LPEN_Msk +#define RCC_AHB5LPENR_XSPI2LPEN_Pos (12U) +#define RCC_AHB5LPENR_XSPI2LPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPI2LPEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB5LPENR_XSPI2LPEN RCC_AHB5LPENR_XSPI2LPEN_Msk +#define RCC_AHB5LPENR_XSPIMLPEN_Pos (14U) +#define RCC_AHB5LPENR_XSPIMLPEN_Msk (0x1UL << RCC_AHB5LPENR_XSPIMLPEN_Pos) /*!< 0x00004000 */ +#define RCC_AHB5LPENR_XSPIMLPEN RCC_AHB5LPENR_XSPIMLPEN_Msk +#define RCC_AHB5LPENR_GFXMMULPEN_Pos (19U) +#define RCC_AHB5LPENR_GFXMMULPEN_Msk (0x1UL << RCC_AHB5LPENR_GFXMMULPEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB5LPENR_GFXMMULPEN RCC_AHB5LPENR_GFXMMULPEN_Msk +#define RCC_AHB5LPENR_GPU2DLPEN_Pos (20U) +#define RCC_AHB5LPENR_GPU2DLPEN_Msk (0x1UL << RCC_AHB5LPENR_GPU2DLPEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB5LPENR_GPU2DLPEN RCC_AHB5LPENR_GPU2DLPEN_Msk +#define RCC_AHB5LPENR_DTCM1LPEN_Pos (28U) +#define RCC_AHB5LPENR_DTCM1LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM1LPEN_Pos) /*!< 0x10000000 */ +#define RCC_AHB5LPENR_DTCM1LPEN RCC_AHB5LPENR_DTCM1LPEN_Msk +#define RCC_AHB5LPENR_DTCM2LPEN_Pos (29U) +#define RCC_AHB5LPENR_DTCM2LPEN_Msk (0x1UL << RCC_AHB5LPENR_DTCM2LPEN_Pos) /*!< 0x20000000 */ +#define RCC_AHB5LPENR_DTCM2LPEN RCC_AHB5LPENR_DTCM2LPEN_Msk +#define RCC_AHB5LPENR_ITCMLPEN_Pos (30U) +#define RCC_AHB5LPENR_ITCMLPEN_Msk (0x1UL << RCC_AHB5LPENR_ITCMLPEN_Pos) /*!< 0x40000000 */ +#define RCC_AHB5LPENR_ITCMLPEN RCC_AHB5LPENR_ITCMLPEN_Msk +#define RCC_AHB5LPENR_AXISRAMLPEN_Pos (31U) +#define RCC_AHB5LPENR_AXISRAMLPEN_Msk (0x1UL << RCC_AHB5LPENR_AXISRAMLPEN_Pos) /*!< 0x80000000 */ +#define RCC_AHB5LPENR_AXISRAMLPEN RCC_AHB5LPENR_AXISRAMLPEN_Msk + +/******************** Bit definition for RCC_APB1LPENR1 register ************/ +#define RCC_APB1LPENR1_TIM2LPEN_Pos (0U) +#define RCC_APB1LPENR1_TIM2LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM2LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1LPENR1_TIM2LPEN RCC_APB1LPENR1_TIM2LPEN_Msk +#define RCC_APB1LPENR1_TIM3LPEN_Pos (1U) +#define RCC_APB1LPENR1_TIM3LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM3LPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR1_TIM3LPEN RCC_APB1LPENR1_TIM3LPEN_Msk +#define RCC_APB1LPENR1_TIM4LPEN_Pos (2U) +#define RCC_APB1LPENR1_TIM4LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM4LPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB1LPENR1_TIM4LPEN RCC_APB1LPENR1_TIM4LPEN_Msk +#define RCC_APB1LPENR1_TIM5LPEN_Pos (3U) +#define RCC_APB1LPENR1_TIM5LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM5LPEN_Pos) /*!< 0x00000008 */ +#define RCC_APB1LPENR1_TIM5LPEN RCC_APB1LPENR1_TIM5LPEN_Msk +#define RCC_APB1LPENR1_TIM6LPEN_Pos (4U) +#define RCC_APB1LPENR1_TIM6LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM6LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB1LPENR1_TIM6LPEN RCC_APB1LPENR1_TIM6LPEN_Msk +#define RCC_APB1LPENR1_TIM7LPEN_Pos (5U) +#define RCC_APB1LPENR1_TIM7LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM7LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR1_TIM7LPEN RCC_APB1LPENR1_TIM7LPEN_Msk +#define RCC_APB1LPENR1_TIM12LPEN_Pos (6U) +#define RCC_APB1LPENR1_TIM12LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM12LPEN_Pos) /*!< 0x00000040 */ +#define RCC_APB1LPENR1_TIM12LPEN RCC_APB1LPENR1_TIM12LPEN_Msk +#define RCC_APB1LPENR1_TIM13LPEN_Pos (7U) +#define RCC_APB1LPENR1_TIM13LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM13LPEN_Pos) /*!< 0x00000080 */ +#define RCC_APB1LPENR1_TIM13LPEN RCC_APB1LPENR1_TIM13LPEN_Msk +#define RCC_APB1LPENR1_TIM14LPEN_Pos (8U) +#define RCC_APB1LPENR1_TIM14LPEN_Msk (0x1UL << RCC_APB1LPENR1_TIM14LPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR1_TIM14LPEN RCC_APB1LPENR1_TIM14LPEN_Msk +#define RCC_APB1LPENR1_LPTIM1LPEN_Pos (9U) +#define RCC_APB1LPENR1_LPTIM1LPEN_Msk (0x1UL << RCC_APB1LPENR1_LPTIM1LPEN_Pos)/*!< 0x00000200 */ +#define RCC_APB1LPENR1_LPTIM1LPEN RCC_APB1LPENR1_LPTIM1LPEN_Msk +#define RCC_APB1LPENR1_WWDGLPEN_Pos (11U) +#define RCC_APB1LPENR1_WWDGLPEN_Msk (0x1UL << RCC_APB1LPENR1_WWDGLPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1LPENR1_WWDGLPEN RCC_APB1LPENR1_WWDGLPEN_Msk +#define RCC_APB1LPENR1_SPI2LPEN_Pos (14U) +#define RCC_APB1LPENR1_SPI2LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI2LPEN_Pos) /*!< 0x00004000 */ +#define RCC_APB1LPENR1_SPI2LPEN RCC_APB1LPENR1_SPI2LPEN_Msk +#define RCC_APB1LPENR1_SPI3LPEN_Pos (15U) +#define RCC_APB1LPENR1_SPI3LPEN_Msk (0x1UL << RCC_APB1LPENR1_SPI3LPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB1LPENR1_SPI3LPEN RCC_APB1LPENR1_SPI3LPEN_Msk +#define RCC_APB1LPENR1_SPDIFRXLPEN_Pos (16U) +#define RCC_APB1LPENR1_SPDIFRXLPEN_Msk (0x1UL << RCC_APB1LPENR1_SPDIFRXLPEN_Pos)/*!< 0x00010000 */ +#define RCC_APB1LPENR1_SPDIFRXLPEN RCC_APB1LPENR1_SPDIFRXLPEN_Msk +#define RCC_APB1LPENR1_USART2LPEN_Pos (17U) +#define RCC_APB1LPENR1_USART2LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART2LPEN_Pos)/*!< 0x00020000 */ +#define RCC_APB1LPENR1_USART2LPEN RCC_APB1LPENR1_USART2LPEN_Msk +#define RCC_APB1LPENR1_USART3LPEN_Pos (18U) +#define RCC_APB1LPENR1_USART3LPEN_Msk (0x1UL << RCC_APB1LPENR1_USART3LPEN_Pos)/*!< 0x00040000 */ +#define RCC_APB1LPENR1_USART3LPEN RCC_APB1LPENR1_USART3LPEN_Msk +#define RCC_APB1LPENR1_UART4LPEN_Pos (19U) +#define RCC_APB1LPENR1_UART4LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART4LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB1LPENR1_UART4LPEN RCC_APB1LPENR1_UART4LPEN_Msk +#define RCC_APB1LPENR1_UART5LPEN_Pos (20U) +#define RCC_APB1LPENR1_UART5LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB1LPENR1_UART5LPEN RCC_APB1LPENR1_UART5LPEN_Msk +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos (21U) +#define RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C1_I3C1LPEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1LPENR1_I2C1_I3C1LPEN RCC_APB1LPENR1_I2C1_I3C1LPEN_Msk +#define RCC_APB1LPENR1_I2C2LPEN_Pos (22U) +#define RCC_APB1LPENR1_I2C2LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C2LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB1LPENR1_I2C2LPEN RCC_APB1LPENR1_I2C2LPEN_Msk +#define RCC_APB1LPENR1_I2C3LPEN_Pos (23U) +#define RCC_APB1LPENR1_I2C3LPEN_Msk (0x1UL << RCC_APB1LPENR1_I2C3LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB1LPENR1_I2C3LPEN RCC_APB1LPENR1_I2C3LPEN_Msk +#define RCC_APB1LPENR1_CECLPEN_Pos (27U) +#define RCC_APB1LPENR1_CECLPEN_Msk (0x1UL << RCC_APB1LPENR1_CECLPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR1_CECLPEN RCC_APB1LPENR1_CECLPEN_Msk +#define RCC_APB1LPENR1_UART7LPEN_Pos (30U) +#define RCC_APB1LPENR1_UART7LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART7LPEN_Pos) /*!< 0x40000000 */ +#define RCC_APB1LPENR1_UART7LPEN RCC_APB1LPENR1_UART7LPEN_Msk +#define RCC_APB1LPENR1_UART8LPEN_Pos (31U) +#define RCC_APB1LPENR1_UART8LPEN_Msk (0x1UL << RCC_APB1LPENR1_UART8LPEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1LPENR1_UART8LPEN RCC_APB1LPENR1_UART8LPEN_Msk + +/******************** Bit definition for RCC_PB1LPENR2 register ************/ +#define RCC_APB1LPENR2_CRSLPEN_Pos (1U) +#define RCC_APB1LPENR2_CRSLPEN_Msk (0x1UL << RCC_APB1LPENR2_CRSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB1LPENR2_CRSLPEN RCC_APB1LPENR2_CRSLPEN_Msk +#define RCC_APB1LPENR2_MDIOSLPEN_Pos (5U) +#define RCC_APB1LPENR2_MDIOSLPEN_Msk (0x1UL << RCC_APB1LPENR2_MDIOSLPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1LPENR2_MDIOSLPEN RCC_APB1LPENR2_MDIOSLPEN_Msk +#define RCC_APB1LPENR2_FDCANLPEN_Pos (8U) +#define RCC_APB1LPENR2_FDCANLPEN_Msk (0x1UL << RCC_APB1LPENR2_FDCANLPEN_Pos) /*!< 0x00000100 */ +#define RCC_APB1LPENR2_FDCANLPEN RCC_APB1LPENR2_FDCANLPEN_Msk +#define RCC_APB1LPENR2_UCPD1LPEN_Pos (27U) +#define RCC_APB1LPENR2_UCPD1LPEN_Msk (0x1UL << RCC_APB1LPENR2_UCPD1LPEN_Pos) /*!< 0x08000000 */ +#define RCC_APB1LPENR2_UCPD1LPEN RCC_APB1LPENR2_UCPD1LPEN_Msk + +/******************** Bit definition for RCC_APB2LPENR register *************/ +#define RCC_APB2LPENR_TIM1LPEN_Pos (0U) +#define RCC_APB2LPENR_TIM1LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM1LPEN_Pos) /*!< 0x00000001 */ +#define RCC_APB2LPENR_TIM1LPEN RCC_APB2LPENR_TIM1LPEN_Msk +#define RCC_APB2LPENR_USART1LPEN_Pos (4U) +#define RCC_APB2LPENR_USART1LPEN_Msk (0x1UL << RCC_APB2LPENR_USART1LPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB2LPENR_USART1LPEN RCC_APB2LPENR_USART1LPEN_Msk +#define RCC_APB2LPENR_SPI1LPEN_Pos (12U) +#define RCC_APB2LPENR_SPI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI1LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2LPENR_SPI1LPEN RCC_APB2LPENR_SPI1LPEN_Msk +#define RCC_APB2LPENR_SPI4LPEN_Pos (13U) +#define RCC_APB2LPENR_SPI4LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI4LPEN_Pos) /*!< 0x00002000 */ +#define RCC_APB2LPENR_SPI4LPEN RCC_APB2LPENR_SPI4LPEN_Msk +#define RCC_APB2LPENR_TIM15LPEN_Pos (16U) +#define RCC_APB2LPENR_TIM15LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM15LPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB2LPENR_TIM15LPEN RCC_APB2LPENR_TIM15LPEN_Msk +#define RCC_APB2LPENR_TIM16LPEN_Pos (17U) +#define RCC_APB2LPENR_TIM16LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM16LPEN_Pos) /*!< 0x00020000 */ +#define RCC_APB2LPENR_TIM16LPEN RCC_APB2LPENR_TIM16LPEN_Msk +#define RCC_APB2LPENR_TIM17LPEN_Pos (18U) +#define RCC_APB2LPENR_TIM17LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM17LPEN_Pos) /*!< 0x00040000 */ +#define RCC_APB2LPENR_TIM17LPEN RCC_APB2LPENR_TIM17LPEN_Msk +#define RCC_APB2LPENR_TIM9LPEN_Pos (19U) +#define RCC_APB2LPENR_TIM9LPEN_Msk (0x1UL << RCC_APB2LPENR_TIM9LPEN_Pos) /*!< 0x00080000 */ +#define RCC_APB2LPENR_TIM9LPEN RCC_APB2LPENR_TIM9LPEN_Msk +#define RCC_APB2LPENR_SPI5LPEN_Pos (20U) +#define RCC_APB2LPENR_SPI5LPEN_Msk (0x1UL << RCC_APB2LPENR_SPI5LPEN_Pos) /*!< 0x00100000 */ +#define RCC_APB2LPENR_SPI5LPEN RCC_APB2LPENR_SPI5LPEN_Msk +#define RCC_APB2LPENR_SAI1LPEN_Pos (22U) +#define RCC_APB2LPENR_SAI1LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI1LPEN_Pos) /*!< 0x00400000 */ +#define RCC_APB2LPENR_SAI1LPEN RCC_APB2LPENR_SAI1LPEN_Msk +#define RCC_APB2LPENR_SAI2LPEN_Pos (23U) +#define RCC_APB2LPENR_SAI2LPEN_Msk (0x1UL << RCC_APB2LPENR_SAI2LPEN_Pos) /*!< 0x00800000 */ +#define RCC_APB2LPENR_SAI2LPEN RCC_APB2LPENR_SAI2LPEN_Msk + +/******************** Bit definition for RCC_APB4LPENR register *************/ +#define RCC_APB4LPENR_SBSLPEN_Pos (1U) +#define RCC_APB4LPENR_SBSLPEN_Msk (0x1UL << RCC_APB4LPENR_SBSLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB4LPENR_SBSLPEN RCC_APB4LPENR_SBSLPEN_Msk +#define RCC_APB4LPENR_LPUART1LPEN_Pos (3U) +#define RCC_APB4LPENR_LPUART1LPEN_Msk (0x1UL << RCC_APB4LPENR_LPUART1LPEN_Pos)/*!< 0x00000008 */ +#define RCC_APB4LPENR_LPUART1LPEN RCC_APB4LPENR_LPUART1LPEN_Msk +#define RCC_APB4LPENR_SPI6LPEN_Pos (5U) +#define RCC_APB4LPENR_SPI6LPEN_Msk (0x1UL << RCC_APB4LPENR_SPI6LPEN_Pos) /*!< 0x00000020 */ +#define RCC_APB4LPENR_SPI6LPEN RCC_APB4LPENR_SPI6LPEN_Msk +#define RCC_APB4LPENR_LPTIM2LPEN_Pos (9U) +#define RCC_APB4LPENR_LPTIM2LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM2LPEN_Pos) /*!< 0x00000200 */ +#define RCC_APB4LPENR_LPTIM2LPEN RCC_APB4LPENR_LPTIM2LPEN_Msk +#define RCC_APB4LPENR_LPTIM3LPEN_Pos (10U) +#define RCC_APB4LPENR_LPTIM3LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM3LPEN_Pos) /*!< 0x00000400 */ +#define RCC_APB4LPENR_LPTIM3LPEN RCC_APB4LPENR_LPTIM3LPEN_Msk +#define RCC_APB4LPENR_LPTIM4LPEN_Pos (11U) +#define RCC_APB4LPENR_LPTIM4LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM4LPEN_Pos) /*!< 0x00000800 */ +#define RCC_APB4LPENR_LPTIM4LPEN RCC_APB4LPENR_LPTIM4LPEN_Msk +#define RCC_APB4LPENR_LPTIM5LPEN_Pos (12U) +#define RCC_APB4LPENR_LPTIM5LPEN_Msk (0x1UL << RCC_APB4LPENR_LPTIM5LPEN_Pos) /*!< 0x00001000 */ +#define RCC_APB4LPENR_LPTIM5LPEN RCC_APB4LPENR_LPTIM5LPEN_Msk +#define RCC_APB4LPENR_VREFLPEN_Pos (15U) +#define RCC_APB4LPENR_VREFLPEN_Msk (0x1UL << RCC_APB4LPENR_VREFLPEN_Pos) /*!< 0x00008000 */ +#define RCC_APB4LPENR_VREFLPEN RCC_APB4LPENR_VREFLPEN_Msk +#define RCC_APB4LPENR_RTCAPBLPEN_Pos (16U) +#define RCC_APB4LPENR_RTCAPBLPEN_Msk (0x1UL << RCC_APB4LPENR_RTCAPBLPEN_Pos) /*!< 0x00010000 */ +#define RCC_APB4LPENR_RTCAPBLPEN RCC_APB4LPENR_RTCAPBLPEN_Msk +#define RCC_APB4LPENR_DTSLPEN_Pos (26U) +#define RCC_APB4LPENR_DTSLPEN_Msk (0x1UL << RCC_APB4LPENR_DTSLPEN_Pos) /*!< 0x04000000 */ +#define RCC_APB4LPENR_DTSLPEN RCC_APB4LPENR_DTSLPEN_Msk + +/******************** Bit definition for RCC_APB5LPENR register *************/ +#define RCC_APB5LPENR_LTDCLPEN_Pos (1U) +#define RCC_APB5LPENR_LTDCLPEN_Msk (0x1UL << RCC_APB5LPENR_LTDCLPEN_Pos) /*!< 0x00000002 */ +#define RCC_APB5LPENR_LTDCLPEN RCC_APB5LPENR_LTDCLPEN_Msk +#define RCC_APB5LPENR_DCMIPPLPEN_Pos (2U) +#define RCC_APB5LPENR_DCMIPPLPEN_Msk (0x1UL << RCC_APB5LPENR_DCMIPPLPEN_Pos) /*!< 0x00000004 */ +#define RCC_APB5LPENR_DCMIPPLPEN RCC_APB5LPENR_DCMIPPLPEN_Msk +#define RCC_APB5LPENR_GFXTIMLPEN_Pos (4U) +#define RCC_APB5LPENR_GFXTIMLPEN_Msk (0x1UL << RCC_APB5LPENR_GFXTIMLPEN_Pos) /*!< 0x00000010 */ +#define RCC_APB5LPENR_GFXTIMLPEN RCC_APB5LPENR_GFXTIMLPEN_Msk + + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RNG_CR register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk +#define RNG_CR_ARDIS_Pos (7U) +#define RNG_CR_ARDIS_Msk (0x1UL << RNG_CR_ARDIS_Pos) +#define RNG_CR_ARDIS RNG_CR_ARDIS_Msk +#define RNG_CR_RNG_CONFIG3_Pos (8U) +#define RNG_CR_RNG_CONFIG3_Msk (0xFUL << RNG_CR_RNG_CONFIG3_Pos) +#define RNG_CR_RNG_CONFIG3 RNG_CR_RNG_CONFIG3_Msk +#define RNG_CR_NISTC_Pos (12U) +#define RNG_CR_NISTC_Msk (0x1UL << RNG_CR_NISTC_Pos) +#define RNG_CR_NISTC RNG_CR_NISTC_Msk +#define RNG_CR_RNG_CONFIG2_Pos (13U) +#define RNG_CR_RNG_CONFIG2_Msk (0x7UL << RNG_CR_RNG_CONFIG2_Pos) +#define RNG_CR_RNG_CONFIG2 RNG_CR_RNG_CONFIG2_Msk +#define RNG_CR_CLKDIV_Pos (16U) +#define RNG_CR_CLKDIV_Msk (0xFUL << RNG_CR_CLKDIV_Pos) +#define RNG_CR_CLKDIV RNG_CR_CLKDIV_Msk +#define RNG_CR_CLKDIV_0 (0x1UL << RNG_CR_CLKDIV_Pos) /*!< 0x00010000 */ +#define RNG_CR_CLKDIV_1 (0x2UL << RNG_CR_CLKDIV_Pos) /*!< 0x00020000 */ +#define RNG_CR_CLKDIV_2 (0x4UL << RNG_CR_CLKDIV_Pos) /*!< 0x00040000 */ +#define RNG_CR_CLKDIV_3 (0x8UL << RNG_CR_CLKDIV_Pos) /*!< 0x00080000 */ +#define RNG_CR_RNG_CONFIG1_Pos (20U) +#define RNG_CR_RNG_CONFIG1_Msk (0x3FUL << RNG_CR_RNG_CONFIG1_Pos) +#define RNG_CR_RNG_CONFIG1 RNG_CR_RNG_CONFIG1_Msk +#define RNG_CR_CONDRST_Pos (30U) +#define RNG_CR_CONDRST_Msk (0x1UL << RNG_CR_CONDRST_Pos) +#define RNG_CR_CONDRST RNG_CR_CONDRST_Msk +#define RNG_CR_CONFIGLOCK_Pos (31U) +#define RNG_CR_CONFIGLOCK_Msk (0x1UL << RNG_CR_CONFIGLOCK_Pos) +#define RNG_CR_CONFIGLOCK RNG_CR_CONFIGLOCK_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************** Bits definition for RNG_HTCR register *******************/ +#define RNG_HTCR_HTCFG_Pos (0U) +#define RNG_HTCR_HTCFG_Msk (0xFFFFFFFFUL << RNG_HTCR_HTCFG_Pos) /*!< 0xFFFFFFFF */ +#define RNG_HTCR_HTCFG RNG_HTCR_HTCFG_Msk + + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk +#define RTC_TR_SU_0 (0x1UL << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2UL << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4UL << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8UL << RTC_TR_SU_Pos) /*!< 0x00000008 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk +#define RTC_TR_ST_0 (0x1UL << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2UL << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4UL << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk +#define RTC_TR_MNU_0 (0x1UL << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2UL << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4UL << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8UL << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk +#define RTC_TR_MNT_0 (0x1UL << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2UL << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4UL << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk +#define RTC_TR_HU_0 (0x1UL << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2UL << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4UL << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8UL << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk +#define RTC_TR_HT_0 (0x1UL << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2UL << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk +#define RTC_DR_DU_0 (0x1UL << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2UL << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4UL << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8UL << RTC_DR_DU_Pos) /*!< 0x00000008 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk +#define RTC_DR_DT_0 (0x1UL << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2UL << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk +#define RTC_DR_MU_0 (0x1UL << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2UL << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4UL << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8UL << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk +#define RTC_DR_WDU_0 (0x1UL << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2UL << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4UL << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk +#define RTC_DR_YU_0 (0x1UL << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2UL << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4UL << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8UL << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk +#define RTC_DR_YT_0 (0x1UL << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2UL << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4UL << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8UL << RTC_DR_YT_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFFFFFUL << RTC_SSR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk + +/******************** Bits definition for RTC_ICSR register ******************/ +#define RTC_ICSR_WUTWF_Pos (2U) +#define RTC_ICSR_WUTWF_Msk (0x1UL << RTC_ICSR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ICSR_WUTWF RTC_ICSR_WUTWF_Msk +#define RTC_ICSR_SHPF_Pos (3U) +#define RTC_ICSR_SHPF_Msk (0x1UL << RTC_ICSR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ICSR_SHPF RTC_ICSR_SHPF_Msk +#define RTC_ICSR_INITS_Pos (4U) +#define RTC_ICSR_INITS_Msk (0x1UL << RTC_ICSR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ICSR_INITS RTC_ICSR_INITS_Msk +#define RTC_ICSR_RSF_Pos (5U) +#define RTC_ICSR_RSF_Msk (0x1UL << RTC_ICSR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ICSR_RSF RTC_ICSR_RSF_Msk +#define RTC_ICSR_INITF_Pos (6U) +#define RTC_ICSR_INITF_Msk (0x1UL << RTC_ICSR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ICSR_INITF RTC_ICSR_INITF_Msk +#define RTC_ICSR_INIT_Pos (7U) +#define RTC_ICSR_INIT_Msk (0x1UL << RTC_ICSR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ICSR_INIT RTC_ICSR_INIT_Msk +#define RTC_ICSR_BIN_Pos (8U) +#define RTC_ICSR_BIN_Msk (0x3UL << RTC_ICSR_BIN_Pos) /*!< 0x00000300 */ +#define RTC_ICSR_BIN RTC_ICSR_BIN_Msk +#define RTC_ICSR_BIN_0 (0x1UL << RTC_ICSR_BIN_Pos) /*!< 0x00000100 */ +#define RTC_ICSR_BIN_1 (0x2UL << RTC_ICSR_BIN_Pos) /*!< 0x00000200 */ +#define RTC_ICSR_BCDU_Pos (10U) +#define RTC_ICSR_BCDU_Msk (0x7UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001C00 */ +#define RTC_ICSR_BCDU RTC_ICSR_BCDU_Msk +#define RTC_ICSR_BCDU_0 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000400 */ +#define RTC_ICSR_BCDU_1 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< 0x00000800 */ +#define RTC_ICSR_BCDU_2 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< 0x00001000 */ +#define RTC_ICSR_RECALPF_Pos (16U) +#define RTC_ICSR_RECALPF_Msk (0x1UL << RTC_ICSR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ICSR_RECALPF RTC_ICSR_RECALPF_Msk + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk +#define RTC_WUTR_WUTOCLR_Pos (16U) +#define RTC_WUTR_WUTOCLR_Msk (0xFFFFUL << RTC_WUTR_WUTOCLR_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUTOCLR RTC_WUTR_WUTOCLR_Msk + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk +#define RTC_CR_WUCKSEL_0 (0x1UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_SSRUIE_Pos (7U) +#define RTC_CR_SSRUIE_Msk (0x1UL << RTC_CR_SSRUIE_Pos) /*!< 0x00000080 */ +#define RTC_CR_SSRUIE RTC_CR_SSRUIE_Msk +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk +#define RTC_CR_OSEL_0 (0x1UL << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2UL << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*! */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0x3FUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_MASKSS_4 (0x10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMASSR_MASKSS_5 (0x20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMASSR_SSCLR_Pos (31U) +#define RTC_ALRMASSR_SSCLR_Msk (0x1UL << RTC_ALRMASSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMASSR_SSCLR RTC_ALRMASSR_SSCLR_Msk + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk +#define RTC_ALRMBR_SU_0 (0x1UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8UL << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk +#define RTC_ALRMBR_ST_0 (0x1UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk +#define RTC_ALRMBR_MNU_0 (0x1UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8UL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk +#define RTC_ALRMBR_MNT_0 (0x1UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk +#define RTC_ALRMBR_HU_0 (0x1UL << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2UL << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4UL << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8UL << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk +#define RTC_ALRMBR_HT_0 (0x1UL << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2UL << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk +#define RTC_ALRMBR_DU_0 (0x1UL << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2UL << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4UL << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8UL << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk +#define RTC_ALRMBR_DT_0 (0x1UL << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2UL << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_SS_Pos (0U) +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0x3FUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x3F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk +#define RTC_ALRMBSSR_MASKSS_0 (0x1UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_MASKSS_4 (0x10UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBSSR_MASKSS_5 (0x20UL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBSSR_SSCLR_Pos (31U) +#define RTC_ALRMBSSR_SSCLR_Msk (0x1UL << RTC_ALRMBSSR_SSCLR_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBSSR_SSCLR RTC_ALRMBSSR_SSCLR_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk +#define RTC_SR_ALRBF_Pos (1U) +#define RTC_SR_ALRBF_Msk (0x1UL << RTC_SR_ALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SR_ALRBF RTC_SR_ALRBF_Msk +#define RTC_SR_WUTF_Pos (2U) +#define RTC_SR_WUTF_Msk (0x1UL << RTC_SR_WUTF_Pos) /*!< 0x00000004 */ +#define RTC_SR_WUTF RTC_SR_WUTF_Msk +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk +#define RTC_SR_ITSF_Pos (5U) +#define RTC_SR_ITSF_Msk (0x1UL << RTC_SR_ITSF_Pos) /*!< 0x00000020 */ +#define RTC_SR_ITSF RTC_SR_ITSF_Msk +#define RTC_SR_SSRUF_Pos (6U) +#define RTC_SR_SSRUF_Msk (0x1UL << RTC_SR_SSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SR_SSRUF RTC_SR_SSRUF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk +#define RTC_MISR_ALRBMF_Pos (1U) +#define RTC_MISR_ALRBMF_Msk (0x1UL << RTC_MISR_ALRBMF_Pos) /*!< 0x00000002 */ +#define RTC_MISR_ALRBMF RTC_MISR_ALRBMF_Msk +#define RTC_MISR_WUTMF_Pos (2U) +#define RTC_MISR_WUTMF_Msk (0x1UL << RTC_MISR_WUTMF_Pos) /*!< 0x00000004 */ +#define RTC_MISR_WUTMF RTC_MISR_WUTMF_Msk +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk +#define RTC_MISR_ITSMF_Pos (5U) +#define RTC_MISR_ITSMF_Msk (0x1UL << RTC_MISR_ITSMF_Pos) /*!< 0x00000020 */ +#define RTC_MISR_ITSMF RTC_MISR_ITSMF_Msk +#define RTC_MISR_SSRUMF_Pos (6U) +#define RTC_MISR_SSRUMF_Msk (0x1UL << RTC_MISR_SSRUMF_Pos) /*!< 0x00000040 */ +#define RTC_MISR_SSRUMF RTC_MISR_SSRUMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk +#define RTC_SCR_CALRBF_Pos (1U) +#define RTC_SCR_CALRBF_Msk (0x1UL << RTC_SCR_CALRBF_Pos) /*!< 0x00000002 */ +#define RTC_SCR_CALRBF RTC_SCR_CALRBF_Msk +#define RTC_SCR_CWUTF_Pos (2U) +#define RTC_SCR_CWUTF_Msk (0x1UL << RTC_SCR_CWUTF_Pos) /*!< 0x00000004 */ +#define RTC_SCR_CWUTF RTC_SCR_CWUTF_Msk +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk +#define RTC_SCR_CITSF_Pos (5U) +#define RTC_SCR_CITSF_Msk (0x1UL << RTC_SCR_CITSF_Pos) /*!< 0x00000020 */ +#define RTC_SCR_CITSF RTC_SCR_CITSF_Msk +#define RTC_SCR_CSSRUF_Pos (6U) +#define RTC_SCR_CSSRUF_Msk (0x1UL << RTC_SCR_CSSRUF_Pos) /*!< 0x00000040 */ +#define RTC_SCR_CSSRUF RTC_SCR_CSSRUF_Msk + +/******************** Bits definition for RTC_ALRABINR register ******************/ +#define RTC_ALRABINR_SS_Pos (0U) +#define RTC_ALRABINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRABINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRABINR_SS RTC_ALRABINR_SS_Msk + +/******************** Bits definition for RTC_ALRBBINR register ******************/ +#define RTC_ALRBBINR_SS_Pos (0U) +#define RTC_ALRBBINR_SS_Msk (0xFFFFFFFFUL << RTC_ALRBBINR_SS_Pos) /*!< 0xFFFFFFFF */ +#define RTC_ALRBBINR_SS RTC_ALRBBINR_SS_Msk + + +/******************************************************************************/ +/* */ +/* Secure Advanced Encryption Standard (SAES) */ +/* */ +/******************************************************************************/ +/******************* Bits definition for SAES_CR register *********************/ +#define SAES_CR_EN_Pos (0U) +#define SAES_CR_EN_Msk (0x1UL << SAES_CR_EN_Pos) /*!< 0x00000001 */ +#define SAES_CR_EN SAES_CR_EN_Msk /*!< SAES Enable */ +#define SAES_CR_DATATYPE_Pos (1U) +#define SAES_CR_DATATYPE_Msk (0x3UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define SAES_CR_DATATYPE SAES_CR_DATATYPE_Msk /*!< Data type selection */ +#define SAES_CR_DATATYPE_0 (0x1UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define SAES_CR_DATATYPE_1 (0x2UL << SAES_CR_DATATYPE_Pos) /*!< 0x00000004 */ +#define SAES_CR_MODE_Pos (3U) +#define SAES_CR_MODE_Msk (0x3UL << SAES_CR_MODE_Pos) /*!< 0x00000018 */ +#define SAES_CR_MODE SAES_CR_MODE_Msk /*!< SAES Mode Of Operation */ +#define SAES_CR_MODE_0 (0x1UL << SAES_CR_MODE_Pos) /*!< 0x00000008 */ +#define SAES_CR_MODE_1 (0x2UL << SAES_CR_MODE_Pos) /*!< 0x00000010 */ +#define SAES_CR_CHMOD_Pos (5U) +#define SAES_CR_CHMOD_Msk (0x803UL << SAES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define SAES_CR_CHMOD SAES_CR_CHMOD_Msk /*!< SAES Chaining Mode */ +#define SAES_CR_CHMOD_0 (0x001UL << SAES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define SAES_CR_CHMOD_1 (0x002UL << SAES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define SAES_CR_CHMOD_2 (0x800UL << SAES_CR_CHMOD_Pos) /*!< 0x00010000 */ +#define SAES_CR_DMAINEN_Pos (11U) +#define SAES_CR_DMAINEN_Msk (0x1UL << SAES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define SAES_CR_DMAINEN SAES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define SAES_CR_DMAOUTEN_Pos (12U) +#define SAES_CR_DMAOUTEN_Msk (0x1UL << SAES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define SAES_CR_DMAOUTEN SAES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ +#define SAES_CR_GCMPH_Pos (13U) +#define SAES_CR_GCMPH_Msk (0x3UL << SAES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define SAES_CR_GCMPH SAES_CR_GCMPH_Msk /*!< GCM Phase */ +#define SAES_CR_GCMPH_0 (0x1UL << SAES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define SAES_CR_GCMPH_1 (0x2UL << SAES_CR_GCMPH_Pos) /*!< 0x00004000 */ +#define SAES_CR_KEYSIZE_Pos (18U) +#define SAES_CR_KEYSIZE_Msk (0x1UL << SAES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define SAES_CR_KEYSIZE SAES_CR_KEYSIZE_Msk /*!< Key size selection */ +#define SAES_CR_NPBLB_Pos (20U) +#define SAES_CR_NPBLB_Msk (0xFUL << SAES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define SAES_CR_NPBLB SAES_CR_NPBLB_Msk /*!< Number of padding bytes in payload last block */ +#define SAES_CR_NPBLB_0 (0x1UL << SAES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define SAES_CR_NPBLB_1 (0x2UL << SAES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define SAES_CR_NPBLB_2 (0x4UL << SAES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define SAES_CR_NPBLB_3 (0x8UL << SAES_CR_NPBLB_Pos) /*!< 0x00800000 */ +#define SAES_CR_KMOD_Pos (24U) +#define SAES_CR_KMOD_Msk (0x3UL << SAES_CR_KMOD_Pos) /*!< 0x00000006 */ +#define SAES_CR_KMOD SAES_CR_KMOD_Msk /*!< Key mode selection */ +#define SAES_CR_KMOD_0 (0x1UL << SAES_CR_KMOD_Pos) /*!< 0x01000000 */ +#define SAES_CR_KMOD_1 (0x2UL << SAES_CR_KMOD_Pos) /*!< 0x02000000 */ +#define SAES_CR_KSHAREID_Pos (26U) +#define SAES_CR_KSHAREID_Msk (0x3UL << SAES_CR_KSHAREID_Pos) /*!< 0x00000006 */ +#define SAES_CR_KSHAREID SAES_CR_KSHAREID_Msk /*!< Key Shared ID */ +#define SAES_CR_KEYSEL_Pos (28U) +#define SAES_CR_KEYSEL_Msk (0x7UL << SAES_CR_KEYSEL_Pos) /*!< 0x00000006 */ +#define SAES_CR_KEYSEL SAES_CR_KEYSEL_Msk /*!< Key Selection */ +#define SAES_CR_KEYSEL_0 (0x1UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_KEYSEL_1 (0x2UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_KEYSEL_2 (0x4UL << SAES_CR_KEYSEL_Pos) /*!< 0x02000000 */ +#define SAES_CR_IPRST_Pos (31U) +#define SAES_CR_IPRST_Msk (0x1UL << SAES_CR_IPRST_Pos) /*!< 0x80000001 */ +#define SAES_CR_IPRST SAES_CR_IPRST_Msk /*!< SAES IP software reset */ + +/******************* Bits definition for SAES_SR register *********************/ +#define SAES_SR_CCF_Pos (0U) +#define SAES_SR_CCF_Msk (0x1UL << SAES_SR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_SR_CCF SAES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define SAES_SR_RDERR_Pos (1U) +#define SAES_SR_RDERR_Msk (0x1UL << SAES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define SAES_SR_RDERR SAES_SR_RDERR_Msk /*!< Read Error Flag */ +#define SAES_SR_WRERR_Pos (2U) +#define SAES_SR_WRERR_Msk (0x1UL << SAES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define SAES_SR_WRERR SAES_SR_WRERR_Msk /*!< Write Error Flag */ +#define SAES_SR_BUSY_Pos (3U) +#define SAES_SR_BUSY_Msk (0x1UL << SAES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define SAES_SR_BUSY SAES_SR_BUSY_Msk /*!< Busy Flag */ +#define SAES_SR_KEYVALID_Pos (7U) +#define SAES_SR_KEYVALID_Msk (0x1UL << SAES_SR_KEYVALID_Pos) /*!< 0x00000008 */ +#define SAES_SR_KEYVALID SAES_SR_KEYVALID_Msk /*!< KEYVALID Flag */ + +/******************* Bits definition for SAES_DINR register *******************/ +#define SAES_DINR_Pos (0U) +#define SAES_DINR_Msk (0xFFFFFFFFUL << SAES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define SAES_DINR SAES_DINR_Msk /*!< SAES Data Input Register */ + +/******************* Bits definition for SAES_DOUTR register ******************/ +#define SAES_DOUTR_Pos (0U) +#define SAES_DOUTR_Msk (0xFFFFFFFFUL << SAES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define SAES_DOUTR SAES_DOUTR_Msk /*!< SAES Data Output Register */ + +/******************* Bits definition for SAES_KEYR0 register ******************/ +#define SAES_KEYR0_Pos (0U) +#define SAES_KEYR0_Msk (0xFFFFFFFFUL << SAES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR0 SAES_KEYR0_Msk /*!< SAES Key Register 0 */ + +/******************* Bits definition for SAES_KEYR1 register ******************/ +#define SAES_KEYR1_Pos (0U) +#define SAES_KEYR1_Msk (0xFFFFFFFFUL << SAES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR1 SAES_KEYR1_Msk /*!< SAES Key Register 1 */ + +/******************* Bits definition for SAES_KEYR2 register ******************/ +#define SAES_KEYR2_Pos (0U) +#define SAES_KEYR2_Msk (0xFFFFFFFFUL << SAES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR2 SAES_KEYR2_Msk /*!< SAES Key Register 2 */ + +/******************* Bits definition for SAES_KEYR3 register ******************/ +#define SAES_KEYR3_Pos (0U) +#define SAES_KEYR3_Msk (0xFFFFFFFFUL << SAES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR3 SAES_KEYR3_Msk /*!< SAES Key Register 3 */ + +/******************* Bits definition for SAES_KEYR4 register ******************/ +#define SAES_KEYR4_Pos (0U) +#define SAES_KEYR4_Msk (0xFFFFFFFFUL << SAES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR4 SAES_KEYR4_Msk /*!< SAES Key Register 4 */ + +/******************* Bits definition for SAES_KEYR5 register ******************/ +#define SAES_KEYR5_Pos (0U) +#define SAES_KEYR5_Msk (0xFFFFFFFFUL << SAES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR5 SAES_KEYR5_Msk /*!< SAES Key Register 5 */ + +/******************* Bits definition for SAES_KEYR6 register ******************/ +#define SAES_KEYR6_Pos (0U) +#define SAES_KEYR6_Msk (0xFFFFFFFFUL << SAES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR6 SAES_KEYR6_Msk /*!< SAES Key Register 6 */ + +/******************* Bits definition for SAES_KEYR7 register ******************/ +#define SAES_KEYR7_Pos (0U) +#define SAES_KEYR7_Msk (0xFFFFFFFFUL << SAES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define SAES_KEYR7 SAES_KEYR7_Msk /*!< SAES Key Register 7 */ + +/******************* Bits definition for SAES_IVR0 register ******************/ +#define SAES_IVR0_Pos (0U) +#define SAES_IVR0_Msk (0xFFFFFFFFUL << SAES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR0 SAES_IVR0_Msk /*!< SAES Initialization Vector Register 0 */ + +/******************* Bits definition for SAES_IVR1 register ******************/ +#define SAES_IVR1_Pos (0U) +#define SAES_IVR1_Msk (0xFFFFFFFFUL << SAES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR1 SAES_IVR1_Msk /*!< SAES Initialization Vector Register 1 */ + +/******************* Bits definition for SAES_IVR2 register ******************/ +#define SAES_IVR2_Pos (0U) +#define SAES_IVR2_Msk (0xFFFFFFFFUL << SAES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR2 SAES_IVR2_Msk /*!< SAES Initialization Vector Register 2 */ + +/******************* Bits definition for SAES_IVR3 register ******************/ +#define SAES_IVR3_Pos (0U) +#define SAES_IVR3_Msk (0xFFFFFFFFUL << SAES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define SAES_IVR3 SAES_IVR3_Msk /*!< SAES Initialization Vector Register 3 */ + +/******************* Bit definition for SAES_SUSP0R register ******************/ +#define SAES_SUSP0R_Pos (0U) +#define SAES_SUSP0R_Msk (0xFFFFFFFFUL << SAES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP0R SAES_SUSP0R_Msk /*!< SAES Suspend registers 0 */ + +/******************* Bit definition for SAES_SUSP1R register ******************/ +#define SAES_SUSP1R_Pos (0U) +#define SAES_SUSP1R_Msk (0xFFFFFFFFUL << SAES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP1R SAES_SUSP1R_Msk /*!< SAES Suspend registers 1 */ + +/******************* Bit definition for SAES_SUSP2R register ******************/ +#define SAES_SUSP2R_Pos (0U) +#define SAES_SUSP2R_Msk (0xFFFFFFFFUL << SAES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP2R SAES_SUSP2R_Msk /*!< SAES Suspend registers 2 */ + +/******************* Bit definition for SAES_SUSP3R register ******************/ +#define SAES_SUSP3R_Pos (0U) +#define SAES_SUSP3R_Msk (0xFFFFFFFFUL << SAES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP3R SAES_SUSP3R_Msk /*!< SAES Suspend registers 3 */ + +/******************* Bit definition for SAES_SUSP4R register ******************/ +#define SAES_SUSP4R_Pos (0U) +#define SAES_SUSP4R_Msk (0xFFFFFFFFUL << SAES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP4R SAES_SUSP4R_Msk /*!< SAES Suspend registers 4 */ + +/******************* Bit definition for SAES_SUSP5R register ******************/ +#define SAES_SUSP5R_Pos (0U) +#define SAES_SUSP5R_Msk (0xFFFFFFFFUL << SAES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP5R SAES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for SAES_SUSP6R register ******************/ +#define SAES_SUSP6R_Pos (0U) +#define SAES_SUSP6R_Msk (0xFFFFFFFFUL << SAES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP6R SAES_SUSP6R_Msk /*!< SAES Suspend registers 6 */ + +/******************* Bit definition for SAES_SUSP7R register ******************/ +#define SAES_SUSP7R_Pos (0U) +#define SAES_SUSP7R_Msk (0xFFFFFFFFUL << SAES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define SAES_SUSP7R SAES_SUSP7R_Msk /*!< SAES Suspend registers 7 */ + +/******************* Bits definition for SAES_IER register ******************/ +#define SAES_IER_CCFIE_Pos (0U) +#define SAES_IER_CCFIE_Msk (0x1UL << SAES_IER_CCFIE_Pos) /*!< 0x00000001 */ +#define SAES_IER_CCFIE SAES_IER_CCFIE_Msk /*!< Computation complete flag interrupt enable */ +#define SAES_IER_RWEIE_Pos (1U) +#define SAES_IER_RWEIE_Msk (0x1UL << SAES_IER_RWEIE_Pos) /*!< 0x00000002 */ +#define SAES_IER_RWEIE SAES_IER_RWEIE_Msk /*!< Read or write error Interrupt Enable */ +#define SAES_IER_KEIE_Pos (2U) +#define SAES_IER_KEIE_Msk (0x1UL << SAES_IER_KEIE_Pos) /*!< 0x00000004 */ +#define SAES_IER_KEIE SAES_IER_KEIE_Msk /*!< Key error interrupt enable */ +#define SAES_IER_RNGEIE_Pos (3U) +#define SAES_IER_RNGEIE_Msk (0x1UL << SAES_IER_RNGEIE_Pos) /*!< 0x00000008 */ +#define SAES_IER_RNGEIE SAES_IER_RNGEIE_Msk /*!< Rng error interrupt enable */ + +/******************* Bits definition for SAES_ISR register ******************/ +#define SAES_ISR_CCF_Pos (0U) +#define SAES_ISR_CCF_Msk (0x1UL << SAES_ISR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_ISR_CCF SAES_ISR_CCF_Msk /*!< Computation complete flag */ +#define SAES_ISR_RWEIF_Pos (1U) +#define SAES_ISR_RWEIF_Msk (0x1UL << SAES_ISR_RWEIF_Pos) /*!< 0x00000002 */ +#define SAES_ISR_RWEIF SAES_ISR_RWEIF_Msk /*!< Read or write error Interrupt flag */ +#define SAES_ISR_KEIF_Pos (2U) +#define SAES_ISR_KEIF_Msk (0x1UL << SAES_ISR_KEIF_Pos) /*!< 0x00000004 */ +#define SAES_ISR_KEIF SAES_ISR_KEIF_Msk /*!< Key error interrupt flag */ +#define SAES_ISR_RNGEIF_Pos (3U) +#define SAES_ISR_RNGEIF_Msk (0x1UL << SAES_ISR_RNGEIF_Pos) /*!< 0x00000008 */ +#define SAES_ISR_RNGEIF SAES_ISR_RNGEIF_Msk /*!< Rng error interrupt flag */ + +/******************* Bits definition for SAES_ICR register ******************/ +#define SAES_ICR_CCF_Pos (0U) +#define SAES_ICR_CCF_Msk (0x1UL << SAES_ICR_CCF_Pos) /*!< 0x00000001 */ +#define SAES_ICR_CCF SAES_ICR_CCF_Msk /*!< Computation complete flag clear */ +#define SAES_ICR_RWEIF_Pos (1U) +#define SAES_ICR_RWEIF_Msk (0x1UL << SAES_ICR_RWEIF_Pos) /*!< 0x00000002 */ +#define SAES_ICR_RWEIF SAES_ICR_RWEIF_Msk /*!< Read or write error Interrupt flag clear */ +#define SAES_ICR_KEIF_Pos (2U) +#define SAES_ICR_KEIF_Msk (0x1UL << SAES_ICR_KEIF_Pos) /*!< 0x00000004 */ +#define SAES_ICR_KEIF SAES_ICR_KEIF_Msk /*!< Key error interrupt flag clear */ +#define SAES_ICR_RNGEIF_Pos (3U) +#define SAES_ICR_RNGEIF_Msk (0x1UL << SAES_ICR_RNGEIF_Pos) /*!< 0x00000008 */ +#define SAES_ICR_RNGEIF SAES_ICR_RNGEIF_Msk /*!< Rng error interrupt flag clear */ + +/******************************************************************************/ +/* */ +/* Serial Audio Interface */ +/* */ +/******************************************************************************/ +/******************** Bit definition for SAI_GCR register *******************/ +#define SAI_GCR_SYNCIN_Pos (0U) +#define SAI_GCR_SYNCIN_Msk (0x3UL << SAI_GCR_SYNCIN_Pos) /*!< 0x00000003 */ +#define SAI_GCR_SYNCIN SAI_GCR_SYNCIN_Msk /*! + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 24000000UL /*!< Value of the High-Speed External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 64000000UL /*!< Value of the High-Speed Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE 4000000UL /*!< Value of the Low-power Internal oscillator in Hz */ +#endif /* CSI_VALUE */ + +/*!< The VTOR location information is based on information from the linker with a dependency + on the IDE, the cortex register is updated using the INTVECT_START. +*/ +#if defined(__ICCARM__) +extern uint32_t __vector_table; +#define INTVECT_START ((uint32_t)& __vector_table) +#elif defined(__CC_ARM) || defined(__ARMCC_VERSION) +extern void * __Vectors; +#define INTVECT_START ((uint32_t) & __Vectors) +#elif defined(__GNUC__) +extern void * g_pfnVectors; +#define INTVECT_START ((uint32_t)& g_pfnVectors) +#endif /* __ICCARM__*/ + + + +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in two ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the first function listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = HSI_VALUE; + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @retval None + */ + +void SystemInit(void) +{ + /* Configure the Vector Table location -------------------------------------*/ + SCB->VTOR = INTVECT_START; + + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 20U)|(3UL << 22U)); /* set CP10 and CP11 Full Access */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to RCC registers values. + * The SystemCoreClock variable contains the core clock (sys_cpu_ck), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSI_VALUE(*) + * or CSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32h7rsxx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) CSI_VALUE is a constant defined in stm32h7rsxx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32h7rsxx_hal.h file (default value + * 24 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t sysclk, hsivalue, pllsource, pllm, pllp, core_presc; + float_t pllfracn, pllvco; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* HSI used as system clock source (default after reset) */ + sysclk = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos)); + break; + + case 0x08: /* CSI used as system clock source */ + sysclk = CSI_VALUE; + break; + + case 0x10: /* HSE used as system clock source */ + sysclk = HSE_VALUE; + break; + + case 0x18: /* PLL1 used as system clock source */ + /* PLL1_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL1_VCO / PLL1R + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos) ; + if ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN) != 0U) + { + pllfracn = (float_t)(uint32_t)(((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN)>> RCC_PLL1FRACR_FRACN_Pos)); + } + else + { + pllfracn = (float_t)0U; + } + + if (pllm != 0U) + { + switch (pllsource) + { + case 0x02: /* HSE used as PLL1 clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (pllfracn/(float_t)0x2000) +(float_t)1 ); + break; + + case 0x01: /* CSI used as PLL1 clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (pllfracn/(float_t)0x2000) +(float_t)1 ); + break; + + case 0x00: /* HSI used as PLL1 clock source */ + default: + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos)); + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVN) + (pllfracn/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR1 & RCC_PLL1DIVR1_DIVP) >> RCC_PLL1DIVR1_DIVP_Pos) + 1U ) ; + sysclk = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + sysclk = 0U; + } + break; + + default: /* Unexpected, default to HSI used as system clock source (default after reset) */ + sysclk = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos)); + break; + } + + /* system clock frequency : CM7 CPU frequency */ + core_presc = (RCC->CDCFGR & RCC_CDCFGR_CPRE); + if (core_presc >= 8U) + { + SystemCoreClock = (sysclk >> (core_presc - RCC_CDCFGR_CPRE_3 + 1U)); + } + else + { + SystemCoreClock = sysclk; + } +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/soc/system_stm32h7rsxx.h b/stm32cube/stm32h7rsxx/soc/system_stm32h7rsxx.h new file mode 100644 index 000000000..c6c0e6e36 --- /dev/null +++ b/stm32cube/stm32h7rsxx/soc/system_stm32h7rsxx.h @@ -0,0 +1,95 @@ +/** + ****************************************************************************** + * @file system_stm32h7rsxx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M7 Device System Source File for STM32H7RSxx devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup STM32H7RSxx_system + * @{ + */ + +#ifndef SYSTEM_STM32H7RSXX_H +#define SYSTEM_STM32H7RSXX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32H7RSxx_System_Includes + * @{ + */ +#include +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Exported_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32H7RSxx_System_Exported_Functions + * @{ + */ + +/** + \brief Setup the microcontroller system. + + Initialize the System and update the SystemCoreClock variable. + */ +extern void SystemInit (void); + + +/** + \brief Update SystemCoreClock variable. + + Updates the SystemCoreClock with current core Clock retrieved from cpu registers. + */ +extern void SystemCoreClockUpdate (void); + + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* SYSTEM_STM32H7RSXX_H */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.c b/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.c new file mode 100644 index 000000000..86e678475 --- /dev/null +++ b/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.c @@ -0,0 +1,450 @@ +/** + ****************************************************************************** + * @file system_stm32h7xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32h7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock, it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** @addtogroup STM32H7xx_System_Private_Includes + * @{ + */ + +#include "stm32h7xx.h" +#include + +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use initialized data in D2 domain SRAM (AHB SRAM) */ +/* #define DATA_IN_D2_SRAM */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in FLASH BANK1 or AXI SRAM, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +#if defined(DUAL_CORE) && defined(CORE_CM4) +/*!< Uncomment the following line if you need to relocate your vector Table + in D2 AXI SRAM else user remap will be done in FLASH BANK2. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D2_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK2_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#else +/*!< Uncomment the following line if you need to relocate your vector Table + in D1 AXI SRAM else user remap will be done in FLASH BANK1. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D1_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#endif /* DUAL_CORE && CORE_CM4 */ +#endif /* USER_VECT_TAB_ADDRESS */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 64000000; + uint32_t SystemD2Clock = 64000000; + const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting and vector table location + * configuration. + * @param None + * @retval None + */ +void SystemInit (void) +{ +#if defined (DATA_IN_D2_SRAM) + __IO uint32_t tmpreg; +#endif /* DATA_IN_D2_SRAM */ + + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + + /* Increasing the CPU frequency */ + if(FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + + /* Set HSION bit */ + RCC->CR |= RCC_CR_HSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */ + RCC->CR &= 0xEAF6ED7FU; + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + +#if defined(D3_SRAM_BASE) + /* Reset D1CFGR register */ + RCC->D1CFGR = 0x00000000; + + /* Reset D2CFGR register */ + RCC->D2CFGR = 0x00000000; + + /* Reset D3CFGR register */ + RCC->D3CFGR = 0x00000000; +#else + /* Reset CDCFGR1 register */ + RCC->CDCFGR1 = 0x00000000; + + /* Reset CDCFGR2 register */ + RCC->CDCFGR2 = 0x00000000; + + /* Reset SRDCFGR register */ + RCC->SRDCFGR = 0x00000000; +#endif + /* Reset PLLCKSELR register */ + RCC->PLLCKSELR = 0x02020200; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x01FF0000; + /* Reset PLL1DIVR register */ + RCC->PLL1DIVR = 0x01010280; + /* Reset PLL1FRACR register */ + RCC->PLL1FRACR = 0x00000000; + + /* Reset PLL2DIVR register */ + RCC->PLL2DIVR = 0x01010280; + + /* Reset PLL2FRACR register */ + + RCC->PLL2FRACR = 0x00000000; + /* Reset PLL3DIVR register */ + RCC->PLL3DIVR = 0x01010280; + + /* Reset PLL3FRACR register */ + RCC->PLL3FRACR = 0x00000000; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + +#if (STM32H7_DEV_ID == 0x450UL) + /* dual core CM7 or single core line */ + if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U) + { + /* if stm32h7 revY*/ + /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */ + *((__IO uint32_t*)0x51008108) = 0x000000001U; + } +#endif /* STM32H7_DEV_ID */ + +#if defined(DATA_IN_D2_SRAM) + /* in case of initialized data in D2 SRAM (AHB SRAM), enable the D2 SRAM clock (AHB SRAM clock) */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) + RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN | RCC_AHB2ENR_D2SRAM3EN); +#elif defined(RCC_AHB2ENR_D2SRAM2EN) + RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN); +#else + RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN); +#endif /* RCC_AHB2ENR_D2SRAM3EN */ + + tmpreg = RCC->AHB2ENR; + (void) tmpreg; +#endif /* DATA_IN_D2_SRAM */ + +#if defined(DUAL_CORE) && defined(CORE_CM4) + /* Configure the Vector Table location add offset address for cortex-M4 ------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D2 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#else + /* + * Disable the FMC bank1 (enabled after reset). + * This, prevents CPU speculation access on this bank which blocks the use of FMC during + * 24us. During this time the others FMC master (such as LTDC) cannot use it! + */ + FMC_Bank1_R->BTCR[0] = 0x000030D2; + + /* Configure the Vector Table location -------------------------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#endif /*DUAL_CORE && CORE_CM4*/ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock , it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*) + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp; + uint32_t common_system_clock; + float_t fracn1, pllvco; + + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + common_system_clock = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + common_system_clock = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ; + pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */ + + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + + break; + + case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + default: + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ; + common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + common_system_clock = 0U; + } + break; + + default: + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + } + + /* Compute SystemClock frequency --------------------------------------------------*/ +#if defined (RCC_D1CFGR_D1CPRE) + tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); + +#else + tmp = D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); + +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.h b/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.h new file mode 100644 index 000000000..e228ef740 --- /dev/null +++ b/stm32cube/stm32h7rsxx/soc/system_stm32h7xx.h @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file system_stm32h7xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device System Source File for STM32H7xx devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef SYSTEM_STM32H7XX_H +#define SYSTEM_STM32H7XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32H7xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32H7xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Domain1 Clock Frequency */ +extern uint32_t SystemD2Clock; /*!< System Domain2 Clock Frequency */ +extern const uint8_t D1CorePrescTable[16] ; /*!< D1CorePrescTable prescalers table values */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* SYSTEM_STM32H7XX_H */ + +/** + * @} + */ + +/** + * @} + */ From 28813c11dbb91b94db36b39b66d822218589e68d Mon Sep 17 00:00:00 2001 From: "F. Ramu" Date: Tue, 26 Mar 2024 10:47:48 +0100 Subject: [PATCH 2/5] stm32cube: common_ll: Regeneration after cube updates Re - generate common_ll headers after Cube updates Included the stm32h7rs hal xspi driver and ll_dlyd header Signed-off-by: F. Ramu --- stm32cube/common_ll/README.rst | 3 ++- stm32cube/common_ll/include/stm32_ll_adc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_bus.h | 2 ++ stm32cube/common_ll/include/stm32_ll_cordic.h | 2 ++ stm32cube/common_ll/include/stm32_ll_cortex.h | 2 ++ stm32cube/common_ll/include/stm32_ll_crc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_crs.h | 2 ++ stm32cube/common_ll/include/stm32_ll_dlyb.h | 2 ++ stm32cube/common_ll/include/stm32_ll_dma.h | 2 ++ stm32cube/common_ll/include/stm32_ll_dma2d.h | 2 ++ stm32cube/common_ll/include/stm32_ll_exti.h | 2 ++ stm32cube/common_ll/include/stm32_ll_fmc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_gpio.h | 2 ++ stm32cube/common_ll/include/stm32_ll_i2c.h | 2 ++ stm32cube/common_ll/include/stm32_ll_i3c.h | 2 ++ stm32cube/common_ll/include/stm32_ll_icache.h | 2 ++ stm32cube/common_ll/include/stm32_ll_iwdg.h | 2 ++ stm32cube/common_ll/include/stm32_ll_lptim.h | 2 ++ stm32cube/common_ll/include/stm32_ll_lpuart.h | 2 ++ stm32cube/common_ll/include/stm32_ll_pka.h | 2 ++ stm32cube/common_ll/include/stm32_ll_pwr.h | 2 ++ stm32cube/common_ll/include/stm32_ll_rcc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_rng.h | 2 ++ stm32cube/common_ll/include/stm32_ll_rtc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_sdmmc.h | 2 ++ stm32cube/common_ll/include/stm32_ll_spi.h | 2 ++ stm32cube/common_ll/include/stm32_ll_system.h | 2 ++ stm32cube/common_ll/include/stm32_ll_tim.h | 2 ++ stm32cube/common_ll/include/stm32_ll_ucpd.h | 2 ++ stm32cube/common_ll/include/stm32_ll_usart.h | 2 ++ stm32cube/common_ll/include/stm32_ll_utils.h | 2 ++ stm32cube/common_ll/include/stm32_ll_wwdg.h | 2 ++ stm32cube/stm32h7rsxx/CMakeLists.txt | 4 ++-- 33 files changed, 66 insertions(+), 3 deletions(-) diff --git a/stm32cube/common_ll/README.rst b/stm32cube/common_ll/README.rst index 59b9faf3f..2d684a19d 100644 --- a/stm32cube/common_ll/README.rst +++ b/stm32cube/common_ll/README.rst @@ -20,6 +20,7 @@ stm32f7xx 1.17.1 stm32g0xx 1.6.1 stm32g4xx 1.5.1 stm32h5xx 1.1.0 +stm32h7rsxx 1.0.0 stm32h7xx 1.11.1 stm32l0xx 1.12.2 stm32l1xx 1.10.4 @@ -30,4 +31,4 @@ stm32u5xx 1.4.0 stm32wbaxx 1.2.0 stm32wbxx 1.18.0 stm32wlxx 1.3.0 -=============== =============== +=============== =============== \ No newline at end of file diff --git a/stm32cube/common_ll/include/stm32_ll_adc.h b/stm32cube/common_ll/include/stm32_ll_adc.h index 4b5ca9947..757d34c61 100644 --- a/stm32cube/common_ll/include/stm32_ll_adc.h +++ b/stm32cube/common_ll/include/stm32_ll_adc.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_bus.h b/stm32cube/common_ll/include/stm32_ll_bus.h index ff6dbc240..8a8097262 100644 --- a/stm32cube/common_ll/include/stm32_ll_bus.h +++ b/stm32cube/common_ll/include/stm32_ll_bus.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_cordic.h b/stm32cube/common_ll/include/stm32_ll_cordic.h index 3d099d6a6..df5cd6e5f 100644 --- a/stm32cube/common_ll/include/stm32_ll_cordic.h +++ b/stm32cube/common_ll/include/stm32_ll_cordic.h @@ -10,6 +10,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32U5X) diff --git a/stm32cube/common_ll/include/stm32_ll_cortex.h b/stm32cube/common_ll/include/stm32_ll_cortex.h index 2506c89e6..f7570c884 100644 --- a/stm32cube/common_ll/include/stm32_ll_cortex.h +++ b/stm32cube/common_ll/include/stm32_ll_cortex.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_crc.h b/stm32cube/common_ll/include/stm32_ll_crc.h index 290cd3db5..4b9307463 100644 --- a/stm32cube/common_ll/include/stm32_ll_crc.h +++ b/stm32cube/common_ll/include/stm32_ll_crc.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_crs.h b/stm32cube/common_ll/include/stm32_ll_crs.h index 4aba4ace8..c18209c58 100644 --- a/stm32cube/common_ll/include/stm32_ll_crs.h +++ b/stm32cube/common_ll/include/stm32_ll_crs.h @@ -14,6 +14,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_dlyb.h b/stm32cube/common_ll/include/stm32_ll_dlyb.h index 23c887b8d..53678ac08 100644 --- a/stm32cube/common_ll/include/stm32_ll_dlyb.h +++ b/stm32cube/common_ll/include/stm32_ll_dlyb.h @@ -8,6 +8,8 @@ #if defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32U5X) #include #endif diff --git a/stm32cube/common_ll/include/stm32_ll_dma.h b/stm32cube/common_ll/include/stm32_ll_dma.h index 793c4eb24..664fb0f25 100644 --- a/stm32cube/common_ll/include/stm32_ll_dma.h +++ b/stm32cube/common_ll/include/stm32_ll_dma.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_dma2d.h b/stm32cube/common_ll/include/stm32_ll_dma2d.h index d6f9d5040..5fd56bd04 100644 --- a/stm32cube/common_ll/include/stm32_ll_dma2d.h +++ b/stm32cube/common_ll/include/stm32_ll_dma2d.h @@ -10,6 +10,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32F7X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L4X) diff --git a/stm32cube/common_ll/include/stm32_ll_exti.h b/stm32cube/common_ll/include/stm32_ll_exti.h index 1b15511dc..c947fe49a 100644 --- a/stm32cube/common_ll/include/stm32_ll_exti.h +++ b/stm32cube/common_ll/include/stm32_ll_exti.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_fmc.h b/stm32cube/common_ll/include/stm32_ll_fmc.h index afc82ec06..c67825c4a 100644 --- a/stm32cube/common_ll/include/stm32_ll_fmc.h +++ b/stm32cube/common_ll/include/stm32_ll_fmc.h @@ -16,6 +16,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L4X) diff --git a/stm32cube/common_ll/include/stm32_ll_gpio.h b/stm32cube/common_ll/include/stm32_ll_gpio.h index e3516ced1..35e30a88d 100644 --- a/stm32cube/common_ll/include/stm32_ll_gpio.h +++ b/stm32cube/common_ll/include/stm32_ll_gpio.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_i2c.h b/stm32cube/common_ll/include/stm32_ll_i2c.h index 022ad2534..938041c35 100644 --- a/stm32cube/common_ll/include/stm32_ll_i2c.h +++ b/stm32cube/common_ll/include/stm32_ll_i2c.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_i3c.h b/stm32cube/common_ll/include/stm32_ll_i3c.h index 3e471c7dc..e67cb4d31 100644 --- a/stm32cube/common_ll/include/stm32_ll_i3c.h +++ b/stm32cube/common_ll/include/stm32_ll_i3c.h @@ -8,4 +8,6 @@ #if defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #endif diff --git a/stm32cube/common_ll/include/stm32_ll_icache.h b/stm32cube/common_ll/include/stm32_ll_icache.h index a5c2737fd..c32807280 100644 --- a/stm32cube/common_ll/include/stm32_ll_icache.h +++ b/stm32cube/common_ll/include/stm32_ll_icache.h @@ -8,6 +8,8 @@ #if defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32L5X) #include #elif defined(CONFIG_SOC_SERIES_STM32U5X) diff --git a/stm32cube/common_ll/include/stm32_ll_iwdg.h b/stm32cube/common_ll/include/stm32_ll_iwdg.h index c7f2329d6..8079540f5 100644 --- a/stm32cube/common_ll/include/stm32_ll_iwdg.h +++ b/stm32cube/common_ll/include/stm32_ll_iwdg.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_lptim.h b/stm32cube/common_ll/include/stm32_ll_lptim.h index c26e0888b..758b88c49 100644 --- a/stm32cube/common_ll/include/stm32_ll_lptim.h +++ b/stm32cube/common_ll/include/stm32_ll_lptim.h @@ -16,6 +16,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_lpuart.h b/stm32cube/common_ll/include/stm32_ll_lpuart.h index 7c34e02f0..453246e09 100644 --- a/stm32cube/common_ll/include/stm32_ll_lpuart.h +++ b/stm32cube/common_ll/include/stm32_ll_lpuart.h @@ -12,6 +12,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_pka.h b/stm32cube/common_ll/include/stm32_ll_pka.h index 5db5e6638..ec4b21c62 100644 --- a/stm32cube/common_ll/include/stm32_ll_pka.h +++ b/stm32cube/common_ll/include/stm32_ll_pka.h @@ -8,6 +8,8 @@ #if defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32L4X) #include #elif defined(CONFIG_SOC_SERIES_STM32L5X) diff --git a/stm32cube/common_ll/include/stm32_ll_pwr.h b/stm32cube/common_ll/include/stm32_ll_pwr.h index b07a502ee..52bfde95e 100644 --- a/stm32cube/common_ll/include/stm32_ll_pwr.h +++ b/stm32cube/common_ll/include/stm32_ll_pwr.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_rcc.h b/stm32cube/common_ll/include/stm32_ll_rcc.h index 360a34528..4c1cc4574 100644 --- a/stm32cube/common_ll/include/stm32_ll_rcc.h +++ b/stm32cube/common_ll/include/stm32_ll_rcc.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_rng.h b/stm32cube/common_ll/include/stm32_ll_rng.h index 9277b1724..ec6e84809 100644 --- a/stm32cube/common_ll/include/stm32_ll_rng.h +++ b/stm32cube/common_ll/include/stm32_ll_rng.h @@ -18,6 +18,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_rtc.h b/stm32cube/common_ll/include/stm32_ll_rtc.h index c6f1febb5..db2f461a9 100644 --- a/stm32cube/common_ll/include/stm32_ll_rtc.h +++ b/stm32cube/common_ll/include/stm32_ll_rtc.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_sdmmc.h b/stm32cube/common_ll/include/stm32_ll_sdmmc.h index d30285820..107fd35ed 100644 --- a/stm32cube/common_ll/include/stm32_ll_sdmmc.h +++ b/stm32cube/common_ll/include/stm32_ll_sdmmc.h @@ -16,6 +16,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L1X) diff --git a/stm32cube/common_ll/include/stm32_ll_spi.h b/stm32cube/common_ll/include/stm32_ll_spi.h index 3161e871c..4dd275957 100644 --- a/stm32cube/common_ll/include/stm32_ll_spi.h +++ b/stm32cube/common_ll/include/stm32_ll_spi.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_system.h b/stm32cube/common_ll/include/stm32_ll_system.h index 95e84440f..16620c218 100644 --- a/stm32cube/common_ll/include/stm32_ll_system.h +++ b/stm32cube/common_ll/include/stm32_ll_system.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_tim.h b/stm32cube/common_ll/include/stm32_ll_tim.h index aecdfa2ef..6810941ac 100644 --- a/stm32cube/common_ll/include/stm32_ll_tim.h +++ b/stm32cube/common_ll/include/stm32_ll_tim.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_ucpd.h b/stm32cube/common_ll/include/stm32_ll_ucpd.h index 00579d085..0c229214d 100644 --- a/stm32cube/common_ll/include/stm32_ll_ucpd.h +++ b/stm32cube/common_ll/include/stm32_ll_ucpd.h @@ -12,6 +12,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32L5X) #include #elif defined(CONFIG_SOC_SERIES_STM32U5X) diff --git a/stm32cube/common_ll/include/stm32_ll_usart.h b/stm32cube/common_ll/include/stm32_ll_usart.h index 6842dc690..4f09449c9 100644 --- a/stm32cube/common_ll/include/stm32_ll_usart.h +++ b/stm32cube/common_ll/include/stm32_ll_usart.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_utils.h b/stm32cube/common_ll/include/stm32_ll_utils.h index c65f48743..6975daf0b 100644 --- a/stm32cube/common_ll/include/stm32_ll_utils.h +++ b/stm32cube/common_ll/include/stm32_ll_utils.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/common_ll/include/stm32_ll_wwdg.h b/stm32cube/common_ll/include/stm32_ll_wwdg.h index 13b1cc0ed..4f48c317c 100644 --- a/stm32cube/common_ll/include/stm32_ll_wwdg.h +++ b/stm32cube/common_ll/include/stm32_ll_wwdg.h @@ -26,6 +26,8 @@ #include #elif defined(CONFIG_SOC_SERIES_STM32H5X) #include +#elif defined(CONFIG_SOC_SERIES_STM32H7RSX) +#include #elif defined(CONFIG_SOC_SERIES_STM32H7X) #include #elif defined(CONFIG_SOC_SERIES_STM32L0X) diff --git a/stm32cube/stm32h7rsxx/CMakeLists.txt b/stm32cube/stm32h7rsxx/CMakeLists.txt index d19c749a5..4f9d45c17 100644 --- a/stm32cube/stm32h7rsxx/CMakeLists.txt +++ b/stm32cube/stm32h7rsxx/CMakeLists.txt @@ -59,7 +59,7 @@ zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_NAND drivers/src/stm32h7rsxx_h zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_NOR drivers/src/stm32h7rsxx_hal_nor.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OPAMP drivers/src/stm32h7rsxx_hal_opamp.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OPAMP_EX drivers/src/stm32h7rsxx_hal_opamp_ex.c) -zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OSPI drivers/src/stm32h7rsxx_hal_ospi.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_XSPI drivers/src/stm32h7rsxx_hal_xspi.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_OTFDEC drivers/src/stm32h7rsxx_hal_otfdec.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PCD drivers/src/stm32h7rsxx_hal_pcd.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_HAL_PCD_EX drivers/src/stm32h7rsxx_hal_pcd_ex.c) @@ -100,7 +100,7 @@ zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CORDIC drivers/src/stm32h7rsxx_ zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CRC drivers/src/stm32h7rsxx_ll_crc.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_CRS drivers/src/stm32h7rsxx_ll_crs.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DAC drivers/src/stm32h7rsxx_ll_dac.c) -zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DELAYBLOCK drivers/src/stm32h7rsxx_ll_delayblock.c) +zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DLYB drivers/src/stm32h7rsxx_ll_dlyb.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DMA drivers/src/stm32h7rsxx_ll_dma.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_DMA2D drivers/src/stm32h7rsxx_ll_dma2d.c) zephyr_library_sources_ifdef(CONFIG_USE_STM32_LL_EXTI drivers/src/stm32h7rsxx_ll_exti.c) From e42d0ff44da5bcea0873636efe13ecd1e176151c Mon Sep 17 00:00:00 2001 From: "F. Ramu" Date: Wed, 13 Mar 2024 15:36:38 +0100 Subject: [PATCH 3/5] scripts: genpictrl: stm32 adding the XSPIM for pinctrl Add the pins of the XSPIM instance especially for the stm32H7RS serie Signed-off-by: F. Ramu --- scripts/genpinctrl/genpinctrl.py | 1 + scripts/genpinctrl/stm32-pinctrl-config.yaml | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/scripts/genpinctrl/genpinctrl.py b/scripts/genpinctrl/genpinctrl.py index 4e331c9cf..a7f6d3ab2 100644 --- a/scripts/genpinctrl/genpinctrl.py +++ b/scripts/genpinctrl/genpinctrl.py @@ -60,6 +60,7 @@ "stm32g4": 0x48000000, "stm32h5": 0x42020000, "stm32h7": 0x58020000, + "stm32h7rs": 0x58020000, "stm32l0": 0x50000000, "stm32l1": 0x40020000, "stm32l4": 0x48000000, diff --git a/scripts/genpinctrl/stm32-pinctrl-config.yaml b/scripts/genpinctrl/stm32-pinctrl-config.yaml index 31f601c17..4991f0eff 100644 --- a/scripts/genpinctrl/stm32-pinctrl-config.yaml +++ b/scripts/genpinctrl/stm32-pinctrl-config.yaml @@ -202,6 +202,10 @@ match: "^QUADSPI(\\d+)?_(?:CLK|NCS|BK1_NCS|BK1_IO[0-3]|BK2_NCS|BK2_IO[0-3])$" slew-rate: very-high-speed +- name: XSPIM + match: "^XSPIM(.*)(?:CLK|NCS[0-1]|DQS[0-1]|IO[0-7])$" + slew-rate: very-high-speed + - name: SDMMC match: "^SDMMC\\d+_(?:CK)?(?:CKIN)?(?:CDIR)?(?:CMD)?(?:D\\d+)?(?:D0DIR)?(?:D123DIR)?$" slew-rate: very-high-speed From baef3b314ecb556bde746752d7f5ed3ccb894612 Mon Sep 17 00:00:00 2001 From: "F. Ramu" Date: Wed, 27 Mar 2024 18:00:34 +0100 Subject: [PATCH 4/5] dts: st: update pinctrl dtsi to include STM32H7RS serie Generate pinctrl dtsi from STM32 open pin data from STM32CubeMX version 6.11.0 (includes STM32h7RS) Signed-off-by: F. Ramu --- dts/st/h7/stm32h7r3a8ix-pinctrl.dtsi | 2832 +++++++++++++++++++ dts/st/h7/stm32h7r3i8kx-pinctrl.dtsi | 2946 ++++++++++++++++++++ dts/st/h7/stm32h7r3i8tx-pinctrl.dtsi | 2887 ++++++++++++++++++++ dts/st/h7/stm32h7r3l8hx-pinctrl.dtsi | 3433 +++++++++++++++++++++++ dts/st/h7/stm32h7r3l8hxh-pinctrl.dtsi | 3292 ++++++++++++++++++++++ dts/st/h7/stm32h7r3r8vx-pinctrl.dtsi | 1192 ++++++++ dts/st/h7/stm32h7r3v8hx-pinctrl.dtsi | 1528 +++++++++++ dts/st/h7/stm32h7r3v8tx-pinctrl.dtsi | 1675 ++++++++++++ dts/st/h7/stm32h7r3v8yx-pinctrl.dtsi | 1508 ++++++++++ dts/st/h7/stm32h7r3z8jx-pinctrl.dtsi | 2418 ++++++++++++++++ dts/st/h7/stm32h7r3z8tx-pinctrl.dtsi | 2501 +++++++++++++++++ dts/st/h7/stm32h7r7a8ix-pinctrl.dtsi | 3032 +++++++++++++++++++++ dts/st/h7/stm32h7r7i8kx-pinctrl.dtsi | 3120 +++++++++++++++++++++ dts/st/h7/stm32h7r7i8tx-pinctrl.dtsi | 3035 +++++++++++++++++++++ dts/st/h7/stm32h7r7l8hx-pinctrl.dtsi | 3631 +++++++++++++++++++++++++ dts/st/h7/stm32h7r7l8hxh-pinctrl.dtsi | 3474 +++++++++++++++++++++++ dts/st/h7/stm32h7r7z8jx-pinctrl.dtsi | 2430 +++++++++++++++++ dts/st/h7/stm32h7s3a8ix-pinctrl.dtsi | 2832 +++++++++++++++++++ dts/st/h7/stm32h7s3i8kx-pinctrl.dtsi | 2946 ++++++++++++++++++++ dts/st/h7/stm32h7s3i8tx-pinctrl.dtsi | 2887 ++++++++++++++++++++ dts/st/h7/stm32h7s3l8hx-pinctrl.dtsi | 3433 +++++++++++++++++++++++ dts/st/h7/stm32h7s3l8hxh-pinctrl.dtsi | 3292 ++++++++++++++++++++++ dts/st/h7/stm32h7s3r8vx-pinctrl.dtsi | 1192 ++++++++ dts/st/h7/stm32h7s3v8hx-pinctrl.dtsi | 1528 +++++++++++ dts/st/h7/stm32h7s3v8tx-pinctrl.dtsi | 1675 ++++++++++++ dts/st/h7/stm32h7s3v8yx-pinctrl.dtsi | 1508 ++++++++++ dts/st/h7/stm32h7s3z8jx-pinctrl.dtsi | 2418 ++++++++++++++++ dts/st/h7/stm32h7s3z8tx-pinctrl.dtsi | 2501 +++++++++++++++++ dts/st/h7/stm32h7s7a8ix-pinctrl.dtsi | 3032 +++++++++++++++++++++ dts/st/h7/stm32h7s7i8kx-pinctrl.dtsi | 3120 +++++++++++++++++++++ dts/st/h7/stm32h7s7i8tx-pinctrl.dtsi | 3035 +++++++++++++++++++++ dts/st/h7/stm32h7s7l8hx-pinctrl.dtsi | 3631 +++++++++++++++++++++++++ dts/st/h7/stm32h7s7l8hxh-pinctrl.dtsi | 3474 +++++++++++++++++++++++ dts/st/h7/stm32h7s7z8jx-pinctrl.dtsi | 2430 +++++++++++++++++ 34 files changed, 89868 insertions(+) create mode 100644 dts/st/h7/stm32h7r3a8ix-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3i8kx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3i8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3l8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3l8hxh-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3r8vx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3v8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3v8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3v8yx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3z8jx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r3z8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7a8ix-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7i8kx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7i8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7l8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7l8hxh-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7r7z8jx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3a8ix-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3i8kx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3i8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3l8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3l8hxh-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3r8vx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3v8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3v8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3v8yx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3z8jx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s3z8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7a8ix-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7i8kx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7i8tx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7l8hx-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7l8hxh-pinctrl.dtsi create mode 100644 dts/st/h7/stm32h7s7z8jx-pinctrl.dtsi diff --git a/dts/st/h7/stm32h7r3a8ix-pinctrl.dtsi b/dts/st/h7/stm32h7r3a8ix-pinctrl.dtsi new file mode 100644 index 000000000..ee42738ba --- /dev/null +++ b/dts/st/h7/stm32h7r3a8ix-pinctrl.dtsi @@ -0,0 +1,2832 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3i8kx-pinctrl.dtsi b/dts/st/h7/stm32h7r3i8kx-pinctrl.dtsi new file mode 100644 index 000000000..d0ed2cbad --- /dev/null +++ b/dts/st/h7/stm32h7r3i8kx-pinctrl.dtsi @@ -0,0 +1,2946 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3i8tx-pinctrl.dtsi b/dts/st/h7/stm32h7r3i8tx-pinctrl.dtsi new file mode 100644 index 000000000..44c02e63f --- /dev/null +++ b/dts/st/h7/stm32h7r3i8tx-pinctrl.dtsi @@ -0,0 +1,2887 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3l8hx-pinctrl.dtsi b/dts/st/h7/stm32h7r3l8hx-pinctrl.dtsi new file mode 100644 index 000000000..97ebe5106 --- /dev/null +++ b/dts/st/h7/stm32h7r3l8hx-pinctrl.dtsi @@ -0,0 +1,3433 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg4: analog_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg5: analog_pg5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg6: analog_pg6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg7: analog_pg7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg8: analog_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg9: analog_pg9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg10: analog_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdc_pg6: eth_mdc_pg6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg8: eth_pps_out_pg8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d22_pg4: fmc_d22_pg4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d23_pg5: fmc_d23_pg5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl2_pg6: fmc_nbl2_pg6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d24_pg7: fmc_d24_pg7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d25_pg8: fmc_d25_pg8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d26_pg9: fmc_d26_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d27_pg10: fmc_d27_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pg10: i2s1_ws_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pg8: i2s6_ws_pg8 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pg9: sdmmc2_d0_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pg10: sdmmc2_d1_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pg9: spi1_miso_pg9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pg10: spi1_nss_pg10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pg8: spi6_nss_pg8 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pg4: tim1_bkin2_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pg6: tim17_bkin_pg6 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3l8hxh-pinctrl.dtsi b/dts/st/h7/stm32h7r3l8hxh-pinctrl.dtsi new file mode 100644 index 000000000..218a5c9bb --- /dev/null +++ b/dts/st/h7/stm32h7r3l8hxh-pinctrl.dtsi @@ -0,0 +1,3292 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po3: analog_po3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp8: analog_pp8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp9: analog_pp9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp10: analog_pp10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp11: analog_pp11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp12: analog_pp12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp13: analog_pp13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp14: analog_pp14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp15: analog_pp15 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs1_po3: xspim_p1_dqs1_po3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3r8vx-pinctrl.dtsi b/dts/st/h7/stm32h7r3r8vx-pinctrl.dtsi new file mode 100644 index 000000000..878224e04 --- /dev/null +++ b/dts/st/h7/stm32h7r3r8vx-pinctrl.dtsi @@ -0,0 +1,1192 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3v8hx-pinctrl.dtsi b/dts/st/h7/stm32h7r3v8hx-pinctrl.dtsi new file mode 100644 index 000000000..d75f8cdbe --- /dev/null +++ b/dts/st/h7/stm32h7r3v8hx-pinctrl.dtsi @@ -0,0 +1,1528 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3v8tx-pinctrl.dtsi b/dts/st/h7/stm32h7r3v8tx-pinctrl.dtsi new file mode 100644 index 000000000..0d00b7604 --- /dev/null +++ b/dts/st/h7/stm32h7r3v8tx-pinctrl.dtsi @@ -0,0 +1,1675 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3v8yx-pinctrl.dtsi b/dts/st/h7/stm32h7r3v8yx-pinctrl.dtsi new file mode 100644 index 000000000..7f5a7fb32 --- /dev/null +++ b/dts/st/h7/stm32h7r3v8yx-pinctrl.dtsi @@ -0,0 +1,1508 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3z8jx-pinctrl.dtsi b/dts/st/h7/stm32h7r3z8jx-pinctrl.dtsi new file mode 100644 index 000000000..6654f0f4f --- /dev/null +++ b/dts/st/h7/stm32h7r3z8jx-pinctrl.dtsi @@ -0,0 +1,2418 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r3z8tx-pinctrl.dtsi b/dts/st/h7/stm32h7r3z8tx-pinctrl.dtsi new file mode 100644 index 000000000..dd38232be --- /dev/null +++ b/dts/st/h7/stm32h7r3z8tx-pinctrl.dtsi @@ -0,0 +1,2501 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7a8ix-pinctrl.dtsi b/dts/st/h7/stm32h7r7a8ix-pinctrl.dtsi new file mode 100644 index 000000000..e3626e934 --- /dev/null +++ b/dts/st/h7/stm32h7r7a8ix-pinctrl.dtsi @@ -0,0 +1,3032 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pd9: ltdc_r1_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pd10: ltdc_b0_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7i8kx-pinctrl.dtsi b/dts/st/h7/stm32h7r7i8kx-pinctrl.dtsi new file mode 100644 index 000000000..4097dbc7d --- /dev/null +++ b/dts/st/h7/stm32h7r7i8kx-pinctrl.dtsi @@ -0,0 +1,3120 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7i8tx-pinctrl.dtsi b/dts/st/h7/stm32h7r7i8tx-pinctrl.dtsi new file mode 100644 index 000000000..bf27efe13 --- /dev/null +++ b/dts/st/h7/stm32h7r7i8tx-pinctrl.dtsi @@ -0,0 +1,3035 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7l8hx-pinctrl.dtsi b/dts/st/h7/stm32h7r7l8hx-pinctrl.dtsi new file mode 100644 index 000000000..5987ddbfb --- /dev/null +++ b/dts/st/h7/stm32h7r7l8hx-pinctrl.dtsi @@ -0,0 +1,3631 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg4: analog_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg5: analog_pg5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg6: analog_pg6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg7: analog_pg7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg8: analog_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg9: analog_pg9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg10: analog_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdc_pg6: eth_mdc_pg6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg8: eth_pps_out_pg8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d22_pg4: fmc_d22_pg4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d23_pg5: fmc_d23_pg5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl2_pg6: fmc_nbl2_pg6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d24_pg7: fmc_d24_pg7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d25_pg8: fmc_d25_pg8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d26_pg9: fmc_d26_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d27_pg10: fmc_d27_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pg10: i2s1_ws_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pg8: i2s6_ws_pg8 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pd9: ltdc_r1_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pd10: ltdc_b0_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pd12: ltdc_de_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf14: ltdc_g0_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf15: ltdc_g1_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pg8: ltdc_g0_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pg12: ltdc_g1_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pg13: ltdc_clk_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pg14: ltdc_b1_pg14 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pg9: sdmmc2_d0_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pg10: sdmmc2_d1_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pg9: spi1_miso_pg9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pg10: spi1_nss_pg10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pg8: spi6_nss_pg8 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pg4: tim1_bkin2_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pg6: tim17_bkin_pg6 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7l8hxh-pinctrl.dtsi b/dts/st/h7/stm32h7r7l8hxh-pinctrl.dtsi new file mode 100644 index 000000000..020e6830a --- /dev/null +++ b/dts/st/h7/stm32h7r7l8hxh-pinctrl.dtsi @@ -0,0 +1,3474 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po3: analog_po3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp8: analog_pp8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp9: analog_pp9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp10: analog_pp10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp11: analog_pp11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp12: analog_pp12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp13: analog_pp13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp14: analog_pp14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp15: analog_pp15 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pd12: ltdc_de_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf14: ltdc_g0_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf15: ltdc_g1_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pg12: ltdc_g1_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pg13: ltdc_clk_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pg14: ltdc_b1_pg14 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs1_po3: xspim_p1_dqs1_po3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7r7z8jx-pinctrl.dtsi b/dts/st/h7/stm32h7r7z8jx-pinctrl.dtsi new file mode 100644 index 000000000..af43f2e50 --- /dev/null +++ b/dts/st/h7/stm32h7r7z8jx-pinctrl.dtsi @@ -0,0 +1,2430 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3a8ix-pinctrl.dtsi b/dts/st/h7/stm32h7s3a8ix-pinctrl.dtsi new file mode 100644 index 000000000..ee42738ba --- /dev/null +++ b/dts/st/h7/stm32h7s3a8ix-pinctrl.dtsi @@ -0,0 +1,2832 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3i8kx-pinctrl.dtsi b/dts/st/h7/stm32h7s3i8kx-pinctrl.dtsi new file mode 100644 index 000000000..d0ed2cbad --- /dev/null +++ b/dts/st/h7/stm32h7s3i8kx-pinctrl.dtsi @@ -0,0 +1,2946 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3i8tx-pinctrl.dtsi b/dts/st/h7/stm32h7s3i8tx-pinctrl.dtsi new file mode 100644 index 000000000..44c02e63f --- /dev/null +++ b/dts/st/h7/stm32h7s3i8tx-pinctrl.dtsi @@ -0,0 +1,2887 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3l8hx-pinctrl.dtsi b/dts/st/h7/stm32h7s3l8hx-pinctrl.dtsi new file mode 100644 index 000000000..97ebe5106 --- /dev/null +++ b/dts/st/h7/stm32h7s3l8hx-pinctrl.dtsi @@ -0,0 +1,3433 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg4: analog_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg5: analog_pg5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg6: analog_pg6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg7: analog_pg7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg8: analog_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg9: analog_pg9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg10: analog_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdc_pg6: eth_mdc_pg6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg8: eth_pps_out_pg8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d22_pg4: fmc_d22_pg4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d23_pg5: fmc_d23_pg5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl2_pg6: fmc_nbl2_pg6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d24_pg7: fmc_d24_pg7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d25_pg8: fmc_d25_pg8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d26_pg9: fmc_d26_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d27_pg10: fmc_d27_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pg10: i2s1_ws_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pg8: i2s6_ws_pg8 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pg9: sdmmc2_d0_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pg10: sdmmc2_d1_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pg9: spi1_miso_pg9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pg10: spi1_nss_pg10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pg8: spi6_nss_pg8 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pg4: tim1_bkin2_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pg6: tim17_bkin_pg6 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3l8hxh-pinctrl.dtsi b/dts/st/h7/stm32h7s3l8hxh-pinctrl.dtsi new file mode 100644 index 000000000..218a5c9bb --- /dev/null +++ b/dts/st/h7/stm32h7s3l8hxh-pinctrl.dtsi @@ -0,0 +1,3292 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po3: analog_po3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp8: analog_pp8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp9: analog_pp9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp10: analog_pp10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp11: analog_pp11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp12: analog_pp12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp13: analog_pp13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp14: analog_pp14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp15: analog_pp15 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs1_po3: xspim_p1_dqs1_po3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3r8vx-pinctrl.dtsi b/dts/st/h7/stm32h7s3r8vx-pinctrl.dtsi new file mode 100644 index 000000000..878224e04 --- /dev/null +++ b/dts/st/h7/stm32h7s3r8vx-pinctrl.dtsi @@ -0,0 +1,1192 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3v8hx-pinctrl.dtsi b/dts/st/h7/stm32h7s3v8hx-pinctrl.dtsi new file mode 100644 index 000000000..d75f8cdbe --- /dev/null +++ b/dts/st/h7/stm32h7s3v8hx-pinctrl.dtsi @@ -0,0 +1,1528 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3v8tx-pinctrl.dtsi b/dts/st/h7/stm32h7s3v8tx-pinctrl.dtsi new file mode 100644 index 000000000..0d00b7604 --- /dev/null +++ b/dts/st/h7/stm32h7s3v8tx-pinctrl.dtsi @@ -0,0 +1,1675 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3v8yx-pinctrl.dtsi b/dts/st/h7/stm32h7s3v8yx-pinctrl.dtsi new file mode 100644 index 000000000..7f5a7fb32 --- /dev/null +++ b/dts/st/h7/stm32h7s3v8yx-pinctrl.dtsi @@ -0,0 +1,1508 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3z8jx-pinctrl.dtsi b/dts/st/h7/stm32h7s3z8jx-pinctrl.dtsi new file mode 100644 index 000000000..6654f0f4f --- /dev/null +++ b/dts/st/h7/stm32h7s3z8jx-pinctrl.dtsi @@ -0,0 +1,2418 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s3z8tx-pinctrl.dtsi b/dts/st/h7/stm32h7s3z8tx-pinctrl.dtsi new file mode 100644 index 000000000..dd38232be --- /dev/null +++ b/dts/st/h7/stm32h7s3z8tx-pinctrl.dtsi @@ -0,0 +1,2501 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7a8ix-pinctrl.dtsi b/dts/st/h7/stm32h7s7a8ix-pinctrl.dtsi new file mode 100644 index 000000000..e3626e934 --- /dev/null +++ b/dts/st/h7/stm32h7s7a8ix-pinctrl.dtsi @@ -0,0 +1,3032 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pd9: ltdc_r1_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pd10: ltdc_b0_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7i8kx-pinctrl.dtsi b/dts/st/h7/stm32h7s7i8kx-pinctrl.dtsi new file mode 100644 index 000000000..4097dbc7d --- /dev/null +++ b/dts/st/h7/stm32h7s7i8kx-pinctrl.dtsi @@ -0,0 +1,3120 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7i8tx-pinctrl.dtsi b/dts/st/h7/stm32h7s7i8tx-pinctrl.dtsi new file mode 100644 index 000000000..bf27efe13 --- /dev/null +++ b/dts/st/h7/stm32h7s7i8tx-pinctrl.dtsi @@ -0,0 +1,3035 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7l8hx-pinctrl.dtsi b/dts/st/h7/stm32h7s7l8hx-pinctrl.dtsi new file mode 100644 index 000000000..5987ddbfb --- /dev/null +++ b/dts/st/h7/stm32h7s7l8hx-pinctrl.dtsi @@ -0,0 +1,3631 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd8: analog_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd9: analog_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd10: analog_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd11: analog_pd11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg4: analog_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg5: analog_pg5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg6: analog_pg6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg7: analog_pg7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg8: analog_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg9: analog_pg9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg10: analog_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdc_pg6: eth_mdc_pg6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg8: eth_pps_out_pg8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pd8: fmc_nbl0_pd8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pd9: fmc_sdclk_pd9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pd10: fmc_clk_pd10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d16_pd11: fmc_d16_pd11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d22_pg4: fmc_d22_pg4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d23_pg5: fmc_d23_pg5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl2_pg6: fmc_nbl2_pg6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d24_pg7: fmc_d24_pg7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d25_pg8: fmc_d25_pg8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d26_pg9: fmc_d26_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d27_pg10: fmc_d27_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pg10: i2s1_ws_pg10 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pg8: i2s6_ws_pg8 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pd8: ltdc_r0_pd8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pd9: ltdc_r1_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pd10: ltdc_b0_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pd12: ltdc_de_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf14: ltdc_g0_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf15: ltdc_g1_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pg8: ltdc_g0_pg8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pg12: ltdc_g1_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pg13: ltdc_clk_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pg14: ltdc_b1_pg14 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pg9: sdmmc2_d0_pg9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pg10: sdmmc2_d1_pg10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pg9: spi1_miso_pg9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pg10: spi1_nss_pg10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pg8: spi6_nss_pg8 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pg4: tim1_bkin2_pg4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pg6: tim17_bkin_pg6 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pd10: tim1_ch4_pd10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pd11: usart3_cts_pd11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pd9: usart3_rx_pd9 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pd8: usart3_tx_pd8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7l8hxh-pinctrl.dtsi b/dts/st/h7/stm32h7s7l8hxh-pinctrl.dtsi new file mode 100644 index 000000000..020e6830a --- /dev/null +++ b/dts/st/h7/stm32h7s7l8hxh-pinctrl.dtsi @@ -0,0 +1,3474 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp2_pf11: adc1_inp2_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn2_pf12: adc1_inn2_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp6_pf12: adc1_inp6_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp2_pf13: adc2_inp2_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn2_pf14: adc2_inn2_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp6_pf14: adc2_inp6_pf14 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc12: analog_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd1: analog_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd12: analog_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd13: analog_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd14: analog_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd15: analog_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe0: analog_pe0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe7: analog_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe8: analog_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe9: analog_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe10: analog_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe11: analog_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe12: analog_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe13: analog_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe14: analog_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe15: analog_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf0: analog_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf1: analog_pf1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf2: analog_pf2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf3: analog_pf3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf4: analog_pf4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf5: analog_pf5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf6: analog_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf7: analog_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf8: analog_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf9: analog_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf10: analog_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf11: analog_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf12: analog_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf13: analog_pf13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf14: analog_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pf15: analog_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg2: analog_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg3: analog_pg3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg11: analog_pg11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg12: analog_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg13: analog_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg14: analog_pg14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg15: analog_pg15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm0: analog_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm1: analog_pm1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm2: analog_pm2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm3: analog_pm3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm5: analog_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm6: analog_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm8: analog_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm9: analog_pm9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn12: analog_pn12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po3: analog_po3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp8: analog_pp8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp9: analog_pp9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp10: analog_pp10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp11: analog_pp11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp12: analog_pp12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp13: analog_pp13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp14: analog_pp14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp15: analog_pp15 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_pps_out_pg3: eth_pps_out_pg3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pd1: fdcan1_tx_pd1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a7_pd1: fmc_a7_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pd1: fmc_a23_pd1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pd12: fmc_ne1_pd12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd13: fmc_int_pd13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d17_pd14: fmc_d17_pd14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d18_pd15: fmc_d18_pd15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pe0: fmc_d9_pe0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a4_pe7: fmc_a4_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pe7: fmc_a20_pe7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a12_pe8: fmc_a12_pe8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a14_pe9: fmc_a14_pe9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a15_pe10: fmc_a15_pe10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnwe_pe11: fmc_sdnwe_pe11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdnras_pe12: fmc_sdnras_pe12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdncas_pe13: fmc_sdncas_pe13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne0_pe14: fmc_sdne0_pe14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke0_pe15: fmc_sdcke0_pe15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a8_pf0: fmc_a8_pf0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a9_pf1: fmc_a9_pf1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a10_pf2: fmc_a10_pf2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a11_pf3: fmc_a11_pf3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a13_pf4: fmc_a13_pf4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pf5: fmc_a16_pf5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pf6: fmc_a17_pf6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pf7: fmc_a18_pf7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pf8: fmc_a19_pf8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pf9: fmc_a21_pf9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pf10: fmc_a22_pf10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a23_pf11: fmc_a23_pf11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d19_pf12: fmc_d19_pf12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d20_pf13: fmc_d20_pf13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a24_pf14: fmc_a24_pf14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a25_pf15: fmc_a25_pf15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d21_pg3: fmc_d21_pg3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d28_pg11: fmc_d28_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d29_pg12: fmc_d29_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d30_pg13: fmc_d30_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d31_pg14: fmc_d31_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl3_pg15: fmc_nbl3_pg15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pf1: i2c2_scl_pf1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pf0: i2c2_sda_pf0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pf2: i2c2_smba_pf2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pg11: i2s1_ck_pg11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pc12: i2s6_ck_pc12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pg13: i2s6_ck_pg13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pd12: ltdc_de_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pe11: ltdc_vsync_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pf0: ltdc_r2_pf0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf7: ltdc_g0_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf8: ltdc_g1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r0_pf9: ltdc_r0_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r1_pf10: ltdc_r1_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b0_pf11: ltdc_b0_pf11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g0_pf14: ltdc_g0_pf14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pf15: ltdc_g1_pf15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pg2: ltdc_hsync_pg2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g1_pg12: ltdc_g1_pg12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pg13: ltdc_clk_pg13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pg14: ltdc_b1_pg14 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc1_ckin_pb8: sdmmc1_ckin_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d4_pb8: sdmmc1_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cdir_pb9: sdmmc1_cdir_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d5_pb9: sdmmc1_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pb13: sdmmc1_d0_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0dir_pc6: sdmmc1_d0dir_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d6_pc6: sdmmc1_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d123dir_pc7: sdmmc1_d123dir_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d7_pc7: sdmmc1_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d0_pc8: sdmmc1_d0_pc8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d1_pc9: sdmmc1_d1_pc9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d2_pc10: sdmmc1_d2_pc10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_d3_pc11: sdmmc1_d3_pc11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_ck_pc12: sdmmc1_ck_pc12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc1_cmd_pd2: sdmmc1_cmd_pd2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pg11: sdmmc2_d2_pg11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pg12: sdmmc2_d3_pg12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pg13: sdmmc2_d6_pg13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pg14: sdmmc2_d7_pg14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe13: spi4_miso_pe13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf8: spi5_miso_pf8 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pf12: spi5_miso_pf12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pg12: spi6_miso_pg12 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pc12: spi3_mosi_pc12 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe14: spi4_mosi_pe14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf9: spi5_mosi_pf9 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf11: spi5_mosi_pf11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pf14: spi5_mosi_pf14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pg14: spi6_mosi_pg14 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe11: spi4_nss_pe11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf6: spi5_nss_pf6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pf13: spi5_nss_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pg11: spi1_sck_pg11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe12: spi4_sck_pe12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf7: spi5_sck_pf7 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pf15: spi5_sck_pf15 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pc12: spi6_sck_pc12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pg13: spi6_sck_pg13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pe15: tim1_bkin_pe15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pf10: tim16_bkin_pf10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pc12: tim1_ch4_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pe8: tim1_ch1n_pe8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pe9: tim1_ch1_pe9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe10: tim1_ch2n_pe10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pe11: tim1_ch2_pe11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pe12: tim1_ch3n_pe12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pe13: tim1_ch3_pe13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pe14: tim1_ch4_pe14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pf8: tim13_ch1_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pb6: tim4_ch1_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pb7: tim4_ch2_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pb8: tim4_ch3_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pb9: tim4_ch4_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch1_pd12: tim4_ch1_pd12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch2_pd13: tim4_ch2_pd13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch3_pd14: tim4_ch3_pd14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim4_ch4_pd15: tim4_ch4_pd15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pf9: tim14_ch1_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pc12: tim15_ch1_pc12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pf6: tim16_ch1_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pf8: tim16_ch1n_pf8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pf7: tim17_ch1_pf7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pf9: tim17_ch1n_pf9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pf14: usart1_cts_pf14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pe10: uart7_cts_pe10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_cts_pf9: uart7_cts_pf9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_cts_pd14: uart8_cts_pd14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pf15: usart1_rts_pf15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pd12: usart3_rts_pd12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pe9: uart7_rts_pe9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart7_rts_pf8: uart7_rts_pf8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart8_rts_pd15: uart8_rts_pd15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pf12: usart1_rx_pf12 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pe7: uart7_rx_pe7 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pf6: uart7_rx_pf6 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pm8: uart7_rx_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart8_rx_pe0: uart8_rx_pe0 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pf13: usart1_tx_pf13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pd1: uart4_tx_pd1 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pc12: uart5_tx_pc12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pe8: uart7_tx_pe8 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pf7: uart7_tx_pf7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pm9: uart7_tx_pm9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart8_tx_pe1: uart8_tx_pe1 { + pinmux = ; + bias-pull-up; + }; + + /* UCPD */ + + /omit-if-no-ref/ ucpd1_cc1_pm0: ucpd1_cc1_pm0 { + pinmux = ; + }; + + /omit-if-no-ref/ ucpd1_cc2_pm1: ucpd1_cc2_pm1 { + pinmux = ; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* USB_OTG_HS */ + + /omit-if-no-ref/ usb_otg_hs_sof_pa4: usb_otg_hs_sof_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dm_pm5: usb_otg_hs_dm_pm5 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_dp_pm6: usb_otg_hs_dp_pm6 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_vbus_pm8: usb_otg_hs_vbus_pm8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_hs_id_pm9: usb_otg_hs_id_pm9 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs1_po3: xspim_p1_dqs1_po3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file diff --git a/dts/st/h7/stm32h7s7z8jx-pinctrl.dtsi b/dts/st/h7/stm32h7s7z8jx-pinctrl.dtsi new file mode 100644 index 000000000..af43f2e50 --- /dev/null +++ b/dts/st/h7/stm32h7s7z8jx-pinctrl.dtsi @@ -0,0 +1,2430 @@ +/* + * NOTE: Autogenerated file using genpinctrl.py + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#include + +/ { + soc { + pinctrl: pin-controller@58020000 { + + /* ADC_IN / ADC_INN / ADC_INP */ + + /omit-if-no-ref/ adc1_inn1_pa0: adc1_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp0_pa0: adc1_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp1_pa1: adc1_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp14_pa2: adc1_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp15_pa3: adc1_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp18_pa4: adc1_inp18_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp3_pa6: adc1_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn3_pa7: adc1_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp7_pa7: adc1_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn5_pb0: adc1_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp9_pb0: adc1_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp5_pb1: adc1_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp10_pc0: adc1_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn10_pc1: adc1_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp11_pc1: adc1_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn11_pc2: adc1_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp12_pc2: adc1_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn12_pc3: adc1_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp13_pc3: adc1_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp4_pc4: adc1_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inn4_pc5: adc1_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc1_inp8_pc5: adc1_inp8_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn1_pa0: adc2_inn1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp0_pa0: adc2_inp0_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp1_pa1: adc2_inp1_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp14_pa2: adc2_inp14_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp15_pa3: adc2_inp15_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp18_pa5: adc2_inp18_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp3_pa6: adc2_inp3_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn3_pa7: adc2_inn3_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp7_pa7: adc2_inp7_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn5_pb0: adc2_inn5_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp9_pb0: adc2_inp9_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp5_pb1: adc2_inp5_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp10_pc0: adc2_inp10_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn10_pc1: adc2_inn10_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp11_pc1: adc2_inp11_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn11_pc2: adc2_inn11_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp12_pc2: adc2_inp12_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn12_pc3: adc2_inn12_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp13_pc3: adc2_inp13_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp4_pc4: adc2_inp4_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inn4_pc5: adc2_inn4_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ adc2_inp8_pc5: adc2_inp8_pc5 { + pinmux = ; + }; + + /* Analog */ + + /omit-if-no-ref/ analog_pa0: analog_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa1: analog_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa2: analog_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa3: analog_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa4: analog_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa5: analog_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa6: analog_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa7: analog_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa8: analog_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa9: analog_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa10: analog_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa11: analog_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa12: analog_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa13: analog_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa14: analog_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pa15: analog_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb0: analog_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb1: analog_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb2: analog_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb3: analog_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb4: analog_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb5: analog_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb6: analog_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb7: analog_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb8: analog_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb9: analog_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb10: analog_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb11: analog_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb12: analog_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb13: analog_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb14: analog_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pb15: analog_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc0: analog_pc0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc1: analog_pc1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc2: analog_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc3: analog_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc4: analog_pc4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc5: analog_pc5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc6: analog_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc7: analog_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc8: analog_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc9: analog_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc10: analog_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc11: analog_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc13: analog_pc13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc14: analog_pc14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pc15: analog_pc15 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd0: analog_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd2: analog_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd3: analog_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd4: analog_pd4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd5: analog_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd6: analog_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pd7: analog_pd7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe1: analog_pe1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe2: analog_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe3: analog_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe4: analog_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe5: analog_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pe6: analog_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg0: analog_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pg1: analog_pg1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph0: analog_ph0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_ph1: analog_ph1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm11: analog_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm12: analog_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm13: analog_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pm14: analog_pm14 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn0: analog_pn0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn1: analog_pn1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn2: analog_pn2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn3: analog_pn3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn4: analog_pn4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn5: analog_pn5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn6: analog_pn6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn7: analog_pn7 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn8: analog_pn8 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn9: analog_pn9 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn10: analog_pn10 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pn11: analog_pn11 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po0: analog_po0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po1: analog_po1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po2: analog_po2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po4: analog_po4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_po5: analog_po5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp0: analog_pp0 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp1: analog_pp1 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp2: analog_pp2 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp3: analog_pp3 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp4: analog_pp4 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp5: analog_pp5 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp6: analog_pp6 { + pinmux = ; + }; + + /omit-if-no-ref/ analog_pp7: analog_pp7 { + pinmux = ; + }; + + /* ETH_MDC */ + + /omit-if-no-ref/ eth_mdc_pc1: eth_mdc_pc1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_MDIO */ + + /omit-if-no-ref/ eth_mdio_pa2: eth_mdio_pa2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ eth_mdio_pa4: eth_mdio_pa4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* ETH_PPS_OUT */ + + /omit-if-no-ref/ eth_pps_out_pb5: eth_pps_out_pb5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* FDCAN_RX */ + + /omit-if-no-ref/ fdcan1_rx_pa11: fdcan1_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pb8: fdcan1_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_rx_pd0: fdcan1_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb5: fdcan2_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_rx_pb12: fdcan2_rx_pb12 { + pinmux = ; + }; + + /* FDCAN_TX */ + + /omit-if-no-ref/ fdcan1_tx_pa12: fdcan1_tx_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan1_tx_pb9: fdcan1_tx_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb1: fdcan2_tx_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb6: fdcan2_tx_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ fdcan2_tx_pb13: fdcan2_tx_pb13 { + pinmux = ; + }; + + /* FMC */ + + /omit-if-no-ref/ fmc_d7_pa0: fmc_d7_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pa1: fmc_d6_pa1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pa2: fmc_d5_pa2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pa5: fmc_noe_pa5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pa7: fmc_int_pa7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pa8: fmc_d4_pa8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pa9: fmc_d3_pa9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pa10: fmc_d2_pa10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pa11: fmc_d1_pa11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pa12: fmc_d0_pa12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pa15: fmc_d15_pa15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_noe_pb1: fmc_noe_pb1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwe_pb2: fmc_nwe_pb2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pb3: fmc_d14_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pb4: fmc_d13_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pb5: fmc_d12_pb5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdne1_pb6: fmc_sdne1_pb6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdcke1_pb7: fmc_sdcke1_pb7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb8: fmc_d9_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pb10: fmc_d11_pb10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pb11: fmc_d10_pb11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d9_pb12: fmc_d9_pb12 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pb13: fmc_d8_pb13 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne1_pb14: fmc_ne1_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a20_pb15: fmc_a20_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl1_pc0: fmc_nbl1_pc0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a0_pc1: fmc_a0_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a16_pc1: fmc_a16_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a1_pc2: fmc_a1_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a17_pc2: fmc_a17_pc2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a2_pc3: fmc_a2_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a18_pc3: fmc_a18_pc3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a3_pc4: fmc_a3_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a19_pc4: fmc_a19_pc4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a5_pc5: fmc_a5_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a21_pc5: fmc_a21_pc5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a6_pd0: fmc_a6_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_a22_pd0: fmc_a22_pd0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nwait_pd3: fmc_nwait_pd3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nl_pd4: fmc_nl_pd4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nce_pd5: fmc_nce_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne2_pd5: fmc_ne2_pd5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_int_pd6: fmc_int_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne3_pd6: fmc_ne3_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d8_pd7: fmc_d8_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d10_pe1: fmc_d10_pe1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d11_pe2: fmc_d11_pe2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d12_pe3: fmc_d12_pe3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d13_pe4: fmc_d13_pe4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d14_pe5: fmc_d14_pe5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d15_pe6: fmc_d15_pe6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_ne4_pn0: fmc_ne4_pn0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_nbl0_pn1: fmc_nbl0_pn1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d0_pn2: fmc_d0_pn2 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d1_pn3: fmc_d1_pn3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d2_pn4: fmc_d2_pn4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d3_pn5: fmc_d3_pn5 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_sdclk_pn6: fmc_sdclk_pn6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_clk_pn7: fmc_clk_pn7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d4_pn8: fmc_d4_pn8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d5_pn9: fmc_d5_pn9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d6_pn10: fmc_d6_pn10 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ fmc_d7_pn11: fmc_d7_pn11 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* I2C_SCL */ + + /omit-if-no-ref/ i2c1_scl_pb6: i2c1_scl_pb6 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_scl_pb8: i2c1_scl_pb8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_scl_pb10: i2c2_scl_pb10 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_scl_pa8: i2c3_scl_pa8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SDA */ + + /omit-if-no-ref/ i2c1_sda_pb7: i2c1_sda_pb7 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c1_sda_pb9: i2c1_sda_pb9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c2_sda_pb11: i2c2_sda_pb11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pa9: i2c3_sda_pa9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ i2c3_sda_pc9: i2c3_sda_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* I2C_SMBA */ + + /omit-if-no-ref/ i2c1_smba_pb5: i2c1_smba_pb5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c2_smba_pb12: i2c2_smba_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ i2c3_smba_pc8: i2c3_smba_pc8 { + pinmux = ; + bias-pull-up; + }; + + /* I2S_CK */ + + /omit-if-no-ref/ i2s1_ck_pa5: i2s1_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb0: i2s1_ck_pb0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s1_ck_pb3: i2s1_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa9: i2s2_ck_pa9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pa12: i2s2_ck_pa12 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb10: i2s2_ck_pb10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pb13: i2s2_ck_pb13 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_ck_pd3: i2s2_ck_pd3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pb3: i2s3_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_ck_pc10: i2s3_ck_pc10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pa5: i2s6_ck_pa5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_ck_pb3: i2s6_ck_pb3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_MCK */ + + /omit-if-no-ref/ i2s1_mck_pc4: i2s1_mck_pc4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s2_mck_pc6: i2s2_mck_pc6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s3_mck_pc7: i2s3_mck_pc7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i2s6_mck_pa3: i2s6_mck_pa3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I2S_WS */ + + /omit-if-no-ref/ i2s1_ws_pa4: i2s1_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s1_ws_pa15: i2s1_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pa11: i2s2_ws_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb4: i2s2_ws_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb9: i2s2_ws_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s2_ws_pb12: i2s2_ws_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa4: i2s3_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s3_ws_pa15: i2s3_ws_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa0: i2s6_ws_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa4: i2s6_ws_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ i2s6_ws_pa15: i2s6_ws_pa15 { + pinmux = ; + }; + + /* I3C_SCL */ + + /omit-if-no-ref/ i3c1_scl_pb6: i3c1_scl_pb6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_scl_pb8: i3c1_scl_pb8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* I3C_SDA */ + + /omit-if-no-ref/ i3c1_sda_pb7: i3c1_sda_pb7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ i3c1_sda_pb9: i3c1_sda_pb9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /* JTAG PORT */ + + /omit-if-no-ref/ debug_jtms_swdio_pa13: debug_jtms_swdio_pa13 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtck_swclk_pa14: debug_jtck_swclk_pa14 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdi_pa15: debug_jtdi_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ debug_jtdo_swo_pb3: debug_jtdo_swo_pb3 { + pinmux = ; + }; + + /* LTDC */ + + /omit-if-no-ref/ ltdc_g3_pa0: ltdc_g3_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pa1: ltdc_g2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa2: ltdc_b7_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pa3: ltdc_de_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pa4: ltdc_r3_pa4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_clk_pa5: ltdc_clk_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b7_pa6: ltdc_b7_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_hsync_pa6: ltdc_hsync_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pa7: ltdc_b1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pa7: ltdc_r4_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b6_pa8: ltdc_b6_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b5_pa9: ltdc_b5_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b4_pa10: ltdc_b4_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b3_pa11: ltdc_b3_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pa12: ltdc_b2_pa12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r5_pa15: ltdc_r5_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_vsync_pb0: ltdc_vsync_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g2_pb1: ltdc_g2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b2_pb2: ltdc_b2_pb2 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r4_pb3: ltdc_r4_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r3_pb4: ltdc_r3_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r2_pb5: ltdc_r2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb10: ltdc_g7_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g6_pb11: ltdc_g6_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g5_pb12: ltdc_g5_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g4_pb13: ltdc_g4_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_de_pb14: ltdc_de_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_g7_pb15: ltdc_g7_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_b1_pd3: ltdc_b1_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r7_pg0: ltdc_r7_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ ltdc_r6_pg1: ltdc_r6_pg1 { + pinmux = ; + }; + + /* SDMMC */ + + /omit-if-no-ref/ sdmmc2_cmd_pa0: sdmmc2_cmd_pa0 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d2_pb3: sdmmc2_d2_pb3 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d3_pb4: sdmmc2_d3_pb4 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d4_pb8: sdmmc2_d4_pb8 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d5_pb9: sdmmc2_d5_pb9 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d0_pb14: sdmmc2_d0_pb14 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d1_pb15: sdmmc2_d1_pb15 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pc1: sdmmc2_ck_pc1 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d6_pc6: sdmmc2_d6_pc6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_d7_pc7: sdmmc2_d7_pc7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_ck_pd6: sdmmc2_ck_pd6 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ sdmmc2_cmd_pd7: sdmmc2_cmd_pd7 { + pinmux = ; + bias-pull-up; + slew-rate = "very-high-speed"; + }; + + /* SPI_MISO */ + + /omit-if-no-ref/ spi1_miso_pa6: spi1_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_miso_pb4: spi1_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pb14: spi2_miso_pb14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_miso_pc2: spi2_miso_pc2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pb4: spi3_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_miso_pc11: spi3_miso_pc11 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_miso_pe5: spi4_miso_pe5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_miso_pm14: spi5_miso_pm14 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pa6: spi6_miso_pa6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_miso_pb4: spi6_miso_pb4 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_MOSI */ + + /omit-if-no-ref/ spi1_mosi_pa7: spi1_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pb5: spi1_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi1_mosi_pd7: spi1_mosi_pd7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pb15: spi2_mosi_pb15 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc1: spi2_mosi_pc1 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi2_mosi_pc3: spi2_mosi_pc3 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb2: spi3_mosi_pb2 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pb5: spi3_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi3_mosi_pd6: spi3_mosi_pd6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi4_mosi_pe6: spi4_mosi_pe6 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi5_mosi_pm13: spi5_mosi_pm13 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pa7: spi6_mosi_pa7 { + pinmux = ; + bias-pull-down; + }; + + /omit-if-no-ref/ spi6_mosi_pb5: spi6_mosi_pb5 { + pinmux = ; + bias-pull-down; + }; + + /* SPI_NSS */ + + /omit-if-no-ref/ spi1_nss_pa4: spi1_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi1_nss_pa15: spi1_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pa11: spi2_nss_pa11 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb4: spi2_nss_pb4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb9: spi2_nss_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi2_nss_pb12: spi2_nss_pb12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa4: spi3_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi3_nss_pa15: spi3_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi4_nss_pe4: spi4_nss_pe4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi5_nss_pm12: spi5_nss_pm12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa0: spi6_nss_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa4: spi6_nss_pa4 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ spi6_nss_pa15: spi6_nss_pa15 { + pinmux = ; + bias-pull-up; + }; + + /* SPI_SCK */ + + /omit-if-no-ref/ spi1_sck_pa5: spi1_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb0: spi1_sck_pb0 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi1_sck_pb3: spi1_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa9: spi2_sck_pa9 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pa12: spi2_sck_pa12 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb10: spi2_sck_pb10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pb13: spi2_sck_pb13 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi2_sck_pd3: spi2_sck_pd3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pb3: spi3_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi3_sck_pc10: spi3_sck_pc10 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi4_sck_pe2: spi4_sck_pe2 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi5_sck_pm11: spi5_sck_pm11 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pa5: spi6_sck_pa5 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ spi6_sck_pb3: spi6_sck_pb3 { + pinmux = ; + bias-pull-down; + slew-rate = "very-high-speed"; + }; + + /* TIM_BKIN */ + + /omit-if-no-ref/ tim1_bkin_pa6: tim1_bkin_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pb12: tim1_bkin_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin_pc10: tim1_bkin_pc10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_bkin2_pe6: tim1_bkin2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pa0: tim15_bkin_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pd2: tim15_bkin_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_bkin_pe3: tim15_bkin_pe3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_bkin_pb4: tim16_bkin_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_bkin_pb5: tim17_bkin_pb5 { + pinmux = ; + }; + + /* TIM_CH / TIM_CHN */ + + /omit-if-no-ref/ tim1_ch3_pa3: tim1_ch3_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pa7: tim1_ch1n_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pa8: tim1_ch1_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pa9: tim1_ch2_pa9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3_pa10: tim1_ch3_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4_pa11: tim1_ch4_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb0: tim1_ch2n_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb1: tim1_ch3n_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1n_pb13: tim1_ch1n_pb13 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pb14: tim1_ch2n_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pb15: tim1_ch3n_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch1_pc2: tim1_ch1_pc2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2_pc3: tim1_ch2_pc3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch3n_pd3: tim1_ch3n_pd3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pd5: tim1_ch4n_pd5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch2n_pe2: tim1_ch2n_pe2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim1_ch4n_pg0: tim1_ch4n_pg0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa0: tim2_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pa1: tim2_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pa2: tim2_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pa3: tim2_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa5: tim2_ch1_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch1_pa15: tim2_ch1_pa15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch2_pb3: tim2_ch2_pb3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch3_pb10: tim2_ch3_pb10 { + pinmux = ; + }; + + /omit-if-no-ref/ tim2_ch4_pb11: tim2_ch4_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch1_pb14: tim12_ch1_pb14 { + pinmux = ; + }; + + /omit-if-no-ref/ tim12_ch2_pb15: tim12_ch2_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ tim13_ch1_pa6: tim13_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pa6: tim3_ch1_pa6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pa7: tim3_ch2_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pb0: tim3_ch3_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pb1: tim3_ch4_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pb4: tim3_ch1_pb4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pb5: tim3_ch2_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch1_pc6: tim3_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch2_pc7: tim3_ch2_pc7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch3_pc8: tim3_ch3_pc8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim3_ch4_pc9: tim3_ch4_pc9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim14_ch1_pa7: tim14_ch1_pa7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch1_pa0: tim5_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pa1: tim15_ch1n_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch2_pa1: tim5_ch2_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pa2: tim15_ch1_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch3_pa2: tim5_ch3_pa2 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pa3: tim15_ch2_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim5_ch4_pa3: tim5_ch4_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1n_pe4: tim15_ch1n_pe4 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch1_pe5: tim15_ch1_pe5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim15_ch2_pe6: tim15_ch2_pe6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1n_pb6: tim16_ch1n_pb6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim16_ch1_pb8: tim16_ch1_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1n_pb7: tim17_ch1n_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ tim17_ch1_pb9: tim17_ch1_pb9 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pa0: tim9_ch1_pa0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pa5: tim9_ch2_pa5 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pb0: tim9_ch1_pb0 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pb1: tim9_ch2_pb1 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch1_pc6: tim9_ch1_pc6 { + pinmux = ; + }; + + /omit-if-no-ref/ tim9_ch2_pc7: tim9_ch2_pc7 { + pinmux = ; + }; + + /* UART_CTS / USART_CTS / LPUART_CTS */ + + /omit-if-no-ref/ lpuart1_cts_pa11: lpuart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_cts_pa11: usart1_cts_pa11 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pa0: usart2_cts_pa0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_cts_pd3: usart2_cts_pd3 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_cts_pb13: usart3_cts_pb13 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb0: uart4_cts_pb0 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_cts_pb15: uart4_cts_pb15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_cts_pc9: uart5_cts_pc9 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RTS / USART_RTS / LPUART_RTS */ + + /omit-if-no-ref/ lpuart1_rts_pa12: lpuart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart1_rts_pa12: usart1_rts_pa12 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pa1: usart2_rts_pa1 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart2_rts_pd4: usart2_rts_pd4 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ usart3_rts_pb14: usart3_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pa15: uart4_rts_pa15 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart4_rts_pb14: uart4_rts_pb14 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /omit-if-no-ref/ uart5_rts_pc8: uart5_rts_pc8 { + pinmux = ; + bias-pull-up; + drive-open-drain; + }; + + /* UART_RX / USART_RX / LPUART_RX */ + + /omit-if-no-ref/ lpuart1_rx_pa10: lpuart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pa10: usart1_rx_pa10 { + pinmux = ; + }; + + /omit-if-no-ref/ lpuart1_rx_pb7: lpuart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb7: usart1_rx_pb7 { + pinmux = ; + }; + + /omit-if-no-ref/ usart1_rx_pb15: usart1_rx_pb15 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pa3: usart2_rx_pa3 { + pinmux = ; + }; + + /omit-if-no-ref/ usart2_rx_pd6: usart2_rx_pd6 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pb11: usart3_rx_pb11 { + pinmux = ; + }; + + /omit-if-no-ref/ usart3_rx_pc11: usart3_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa1: uart4_rx_pa1 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pa11: uart4_rx_pa11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pb8: uart4_rx_pb8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pc11: uart4_rx_pc11 { + pinmux = ; + }; + + /omit-if-no-ref/ uart4_rx_pd0: uart4_rx_pd0 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb5: uart5_rx_pb5 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pb12: uart5_rx_pb12 { + pinmux = ; + }; + + /omit-if-no-ref/ uart5_rx_pd2: uart5_rx_pd2 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pa8: uart7_rx_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ uart7_rx_pb3: uart7_rx_pb3 { + pinmux = ; + }; + + /* UART_TX / USART_TX / LPUART_TX */ + + /omit-if-no-ref/ lpuart1_tx_pa9: lpuart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pa9: usart1_tx_pa9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ lpuart1_tx_pb6: lpuart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb6: usart1_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart1_tx_pb14: usart1_tx_pb14 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pa2: usart2_tx_pa2 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart2_tx_pd5: usart2_tx_pd5 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pb10: usart3_tx_pb10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ usart3_tx_pc10: usart3_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa0: uart4_tx_pa0 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pa12: uart4_tx_pa12 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pb9: uart4_tx_pb9 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart4_tx_pc10: uart4_tx_pc10 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb6: uart5_tx_pb6 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb7: uart5_tx_pb7 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart5_tx_pb13: uart5_tx_pb13 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pa15: uart7_tx_pa15 { + pinmux = ; + bias-pull-up; + }; + + /omit-if-no-ref/ uart7_tx_pb4: uart7_tx_pb4 { + pinmux = ; + bias-pull-up; + }; + + /* USB_OTG_FS */ + + /omit-if-no-ref/ usb_otg_fs_sof_pa8: usb_otg_fs_sof_pa8 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dp_pm11: usb_otg_fs_dp_pm11 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_dm_pm12: usb_otg_fs_dm_pm12 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_id_pm13: usb_otg_fs_id_pm13 { + pinmux = ; + }; + + /omit-if-no-ref/ usb_otg_fs_vbus_pm14: usb_otg_fs_vbus_pm14 { + pinmux = ; + }; + + /* XSPIM */ + + /omit-if-no-ref/ xspim_p2_dqs0_pn0: xspim_p2_dqs0_pn0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_ncs1_pn1: xspim_p2_ncs1_pn1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io0_pn2: xspim_p2_io0_pn2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io1_pn3: xspim_p2_io1_pn3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io2_pn4: xspim_p2_io2_pn4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io3_pn5: xspim_p2_io3_pn5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_clk_pn6: xspim_p2_clk_pn6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_nclk_pn7: xspim_p2_nclk_pn7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io4_pn8: xspim_p2_io4_pn8 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io5_pn9: xspim_p2_io5_pn9 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io6_pn10: xspim_p2_io6_pn10 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p2_io7_pn11: xspim_p2_io7_pn11 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_ncs1_po0: xspim_p1_ncs1_po0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_dqs0_po2: xspim_p1_dqs0_po2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_clk_po4: xspim_p1_clk_po4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_nclk_po5: xspim_p1_nclk_po5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io0_pp0: xspim_p1_io0_pp0 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io1_pp1: xspim_p1_io1_pp1 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io2_pp2: xspim_p1_io2_pp2 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io3_pp3: xspim_p1_io3_pp3 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io4_pp4: xspim_p1_io4_pp4 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io5_pp5: xspim_p1_io5_pp5 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io6_pp6: xspim_p1_io6_pp6 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + /omit-if-no-ref/ xspim_p1_io7_pp7: xspim_p1_io7_pp7 { + pinmux = ; + slew-rate = "very-high-speed"; + }; + + }; + }; +}; \ No newline at end of file From 077e943b60f95fab515ddfcbb41210b863b76951 Mon Sep 17 00:00:00 2001 From: "F. Ramu" Date: Tue, 5 Mar 2024 15:27:59 +0100 Subject: [PATCH 5/5] stm32h7s7x device has SMPS configure the SMPS on the stm32h7s7 so that power config is possible on the stm32h7s78 disco kit Signed-off-by: F. Ramu --- stm32cube/stm32h7rsxx/README | 4 ++++ stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/stm32cube/stm32h7rsxx/README b/stm32cube/stm32h7rsxx/README index daa57e19c..18884b724 100644 --- a/stm32cube/stm32h7rsxx/README +++ b/stm32cube/stm32h7rsxx/README @@ -43,4 +43,8 @@ Patch List: -Added stm32cube/stm32h7rsxx/drivers/include/stm32_assert.h -Removed unused stm32cube/stm32h7rsxx/drivers/include/stm32_assert_template.h + *configure the SMPS on the stm32h7s7 so that power config is possible + on the stm32h7s78 disco kit + -internal ticket 175303 + See release_note.html from STM32Cube diff --git a/stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h b/stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h index 07fec9f9e..5b089fc92 100644 --- a/stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h +++ b/stm32cube/stm32h7rsxx/soc/stm32h7s7xx.h @@ -219,6 +219,8 @@ typedef enum /* ================ Processor and Core Peripheral Section ================ */ /* =========================================================================================================================== */ +#define SMPS /*!< Switched mode power supply feature */ + /** * @brief Configuration of the Cortex-M7 Processor and Core Peripherals */